tender for maintenance work in toilet in npp loni, repair of toilets, 1 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. dsr 17.7.1 2 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. dsr 17.7.2 3 providing and fixing brass stop cock of approved quality : dsr no.18.16.115 mm nominal bore 4 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :2 18.17.1a 20 mm nominal bore 5 providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : dsr no. 18.18.2 6 providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. d.s r no. 17.19.1 7 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china flat back wash basin size 550x400 mm with single 15 mm c.p. brass pillar tap dsr17.7.4 8 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 :dsr18.53.1 15mm nominal bore 9 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:y. dsr no 17.1.1 white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests1 10 providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. dsr no. 17.23 11 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete.s :dsr17.28.2flexible pipem 12 providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. :dsr 17.30 13 providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : :dsr17.32.2 rectangular shape 453x357 mm 14 providing and fixing ptmt towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. :dsr 17.72 15 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. :dsr 17.71 16 providing and fixing uplasticised pvc connection pipe with brass unions :dsr18.21.130 cm length15 mm nominal bore mm 17 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 :dsr18.53.1 15mm nominal bore 18 providing and fixing c.p. brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of engineer-in-charge.:dsr18.53.a 15mm nominal bore 19 supply and fixing of 100mm. (4) internal dia a c downpipe of 6 kg/cm² working pressure including all fitting as colar, socket, tee, band,clamp, fixed to wall by 15cm long iron nails & solution and repairing of demage wall surface during execution of work. including supply of all materials, labour and t&p etc. required for proper completion of the work. (kissan/supreme quality) si no. 730 a 20 supply and fixing vitrified thiles (kajaria, bell, j & j or somani) in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointinf and polishing complete including supply of all materials, labour and t & p complete. 21 supply and fixing 6mm. (¼) china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointinf and polishing complete, including supply of all materials, labour and tools and plants. 22 m 150 (1:4) brick work in super structure ,fine sand including supply of all materials labour t&p etc.required for proper completion of the work . s.i no 307 +309+310 23 12 mm thick plaster (1:4) with cement & fine sand minimum thickness n-ot to be less than 1 cm including supply of all material labour t&p etc. required for proper completion of the work s.i no 583 24 cement concrete (1:2:4) with 2cm guage approved stone ballast, coarse sand & cement in the materials, labour tools & plants etc. required for proper completion of the work. 25 scraping old white or colour wash including disposal of refuse as directed by the engineer-in-charge within a distance of 60 metre (200 feet).708 26 finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools & plant etc. requied for proper completion of the work.si no. 660+661 27 providing wall putty on old surface with approved quality material of berger/ j.k./birla or similar make 2 coats. 28 100 mm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plaster with 25mm thick mud mortar mixed with bhusa at 35 kgs. per cum of earth and gobri looping with mix 1:1 (1 clay and 1 cow dungs) and covered with cement mortar 1:3 (1 cement 3 fine sand) and finished neat. 29 painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one sq. metre) paint (british antesal or equivalent) including supply of all materials, labour, tools & plants etc. required for proper completion of the work. paint to be used should confirm the isi no. 103-109. 30 balti, mag, brush harpik,sop,& etc all complete 31 gst