tender for arc work repairing of municipality ownership buildings. - dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks. roads patches 2 carriage of erath work with in lead 1.0 km including loading, unloading etc. as per item no 1.. 3 earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per mort&h specification clause 301. 4 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinthlevel :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 5 centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform. roof 6 centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform. lintels, beams, plinth beams, girders, bressumers and cantilevers. 7 centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform. columns, pillars, piers, abutments, posts and struts. 8 reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete thermo-mechanically treated bars. 9 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). slab, chajja beam,beam 10 cement plastering including t&p, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar 1:4 (1 cement : 4 fine/ coarse sand) 11 grading roof for water proofing treatment with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size) 12 providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorption less than or equal to0.08% confirming to is : 13753 & is : 15622 in floor, steps etc laid on bed on neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost ofcement plaster on wall and pillar) size 600mm x 600mm . floor, walls 13 providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. green / black upto to 1500 cm2 tiles 14 providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete 15 finishing walls with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of special primer applied @ 0.75 ltr / 10 sqm qty. same as plaster 16 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. all complete fixed to steel windows by welding 17 30 mm thick factory made polyvinyl chloride (pvc) door shutter made of styles and rails of a upvc hollow section of size 60x30 mm and wall thickness 2 mm ± 0.2 mm with inbuilt decorative moulding edging on one side. the styles and rails mitred and joined at the corners by means of m.s. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steelscrews. the styles of the shutter reinforced by inserting galvanisedm.s. tube of size 25x20 mm and 1 mm ± 0.1 mm wall thickness. the lock rail made up of h section, a upvc hollow section of size 100x30 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic/ galvanised m.s. u cleats. the shutter frame filled with a upvc multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised m.s. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of engineer-in-charge. 18 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 19 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections of approved make conforming to is: 733 and is : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners includingnecessary filling up of gaps at junctions, at top, bottom and sides with required pvc/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge.(glazing and panelling to be paid for separately) :anodised aluminium (anodised transparent or dyed to required shade according to is: 1868, minimum anodic coating of grade ac15) 20 providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets,40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :w.c. pan with isi marked white solid plastic seat and lid. 21 providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350mm and 340x410x265mmsizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : range of two urinal basins with 5 litre white p.v.c. automaticflushing cistern. 22 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern,includingpainting of fittings and brackets, cutting and making good the walls wherever require : white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps. 23 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standarddesign. with bricks