construction of katar nallah ph-ii mhs (1 x 100 kw) at limeking in upper subansiri district (sh - supplying, erection, testing and commissioning of electro-mechanical equipment complete on lump sum fixed tender)-design and manufacturing horizontal francis turbine to deliver 100 kw,1000 rpm at generator terminals with shaft, runner, casing, bearings, oil pressure units etc. and all other auxiliaries with 10% continuous over rating conforming to relevant international specifications. 3 design, manufacturing and supply of synchronous generators 100 kw 0.415 kv, 3 phase, 0.8 pf, 50 hz + 3%, 1000 rpm brushless excitation,class f insulation for rotor and classf insulation for stator, necessary terminal equipment like neutral grounding system la/sc and other auxillary systems as required complete with 10% continous over rating suitable for above turbine. 4 design, manufacturing and supply of generator/turbine control panels including acbs, protection, metering systems, all indicating instruments & switches, arrangement of power house lighting & auxillaries etc with one synchronising panel including provision for synchronising the power house with grid. 5 design, manufacturing and supply of electronic load controller of reputed make with delta connected ballast loads suitable for governing and regulation of above turbine-alternator system complete in all respect and grid synchronising. 6 main inlet valves suitable for fixing on penstocks for emergency closure (butterfly valve) complete with mounting flanges. 7 station auxiliaries 8 1.1 kv power and control cable with accessories as per site requirement. 9 24 volts 200 ah d.c. battery, charger and distribution board. 10 design, manufacturing and supply of station service board including bus bar, with mccbs/ mcbs etc. of adequate capacities including 10 kva station aux. t/f complete with all accessories as per site requirement. 11 earthing of power house & switchyard equipment as per is:3043 and ie rules 1956 as amended upto date. 12 any other items required for project completion and successful commissioning. 13 erection, testing & commission