work in deposit scheme under the area of edd 3 moradabad- 1 safe carriage of the following material from store centre majhola / jes store to work site including loading and unloading at both ends :- 2 11 mtr. / 8.5 mtr. long pcc / st poles. 3 11 kv xlpe cable of size 3x70 sq.mm. ( 350 meter ) and 3x120 sq.mm. ( 100 meter ) 4 line material such as cross-arms, pin insulators, guarding angles, guarding wire, disc insulators and cable jointing kits, 11 kv ct / pt unit etc. 5 11kv o / g vcb 400 / 200 / 5a 6 11 kv pilfer proof metering cubical. 7 for 11 kv line, single support 8.5 mtr. long pcc poles :- excavation of foundation pit in size of 75x45 cm. having depth of 1 / 6th of the full length of the support ( pole ) , providing and laying of stone pad ( 300x300x75mm. ) in the bottom of the pit. erection of support ( pole ) complete with fixing of 11 kv v-type cross-arms and all other accessories by providing stone pad, cross arms, holding clamps, f-bracket and nuts & bolts etc. as per respo norms. 8 for 11 kv line, double pole structure with 8.5 mtr. long pcc poles :- excavation of foundation pit in size of 75x45 cm. having depth of 1 / 6th of the full length of the support ( pole ) . erection of support ( pole ) complete work by fixing of d.p. clamps and all other accessories. the work includes fabrication work and fixing of cross bracing sets, cutting holes complete work as per respo norms. 9 for 11 kv line, double pole structure with 11 mtr. long st poles :- excavation of foundation pit in size of 75x45 cm. having depth of 1 / 6th of the full length of the support ( pole ) . erection of support ( pole ) complete work by fixing of d.p. clamps and all other accessories. the work includes fabrication work and fixing of cross bracing sets, cutting holes complete work as per respo norms. 10 grouting of poles support :- grouting of support in cc 1:4:6 ( cement, sand and 40 mm. brick ballast ) grouting will be done in the block of size 45cm x 45cm x 1 / 6th of full length of the support upto ground level as per respo norms. 11 grouting of stay rods ( 20x1800mm. ) including all works of excavation, cement concrete in size of ( 0.60x0.60x0.30 ) m in the ratio of 1:4:6 ( cement, sand and 40 mm. brick ballast ) including back filling of soil and proper ramming etc. 12 fixing, tightening and nozelling of stay wire with stay rod and stay insulators with the pole of required tension by providing stay clamps, nuts, bolts etc. 13 earthing of support with ms earth rod of ( 20x2500 ) mm. long including excavation of pit and driving ms rod 3.0m apart from support and 0.5m below the ground level and connecting below the earth electrodes with the help of g.i. wire no.6 swg tightening with nuts and bolts. 14 laying of 11 kv xlpe cable of size 3x70 sq.mm. and making connections as per respo norms. 15 digging of cable trench, laying of 100 meter 11 kv xlpe of size 3x120 sq.mm. and refilling and ramming of the left out soil, closing the trench and levelling. spare cable shall be left in the loop shape at both ends, including providing of all required material and t&p. 16 filling and fixing of 11 kv outdoor / indoor type cable jointing kits as per respo norms. 17 providing and fixing of danger board with clamp, nut and bolts. 18 providing and wrapping of barbed wire on 11 kv pcc poles at a height of 2.75 mtr. from the ground level as per respo norms. ( 01 kg per pole. ) 19 fitting of 11 kv pilfer proof metering cubical including making proper connections. 20 installation of 11 kv o / g vcb 400 / 200 / 5a at substation with proper connection and other necessary works 21 mounting and fixing of 11 kv ct / pt unit on double pole including making proper connections. 22 providing g.i. pipe 6” dia for inserting 11 kv xlpe cable for safety of cable on single / double pole by providing and fixing of ms clamp, nuts and bolts.