repairs and renovations at chc, kotauratla in anakapalli district.-dismantling doors , windows and clear storey windows, ventilators etc., ( wood or steel ) shutters including chowkhats , architraves,hold fasts and other attachments etc., and stacking them within 100m lead including labour charge etc., and complete for finished item of work for exceeding 3 sqm in area : dismantling doors , windows and clear storey windows, ventilators etc., ( wood or steel ) shutters including chowkhats , architraves,hold fasts and other attachments etc., and stacking them within 100m lead including labour charge etc., and complete for finished item of work for exceeding 3 sqm in area : dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by executive engineer duly taking actual premeasurements before dismantling including all labour charges , etc., complete for brick masonry dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by executive engineer duly taking actual premeasurements before dismantling including all labour charges , etc., complete for tiles earth work excavation for foundations (mechanical means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work excluding dewatering charges etc., as per ss 20 b(apss 308) filling with carted coarse sand, coarse agreegates (40mm, 20mm, 10mm, 6mm) inharvesting pit initial lead in layers not exceeding 30cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of t&p etc., complete for fnished item of work(apss no.309&310) plain cement concrete (1:5:10) (cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using concrete mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,.. complete for finished item of work. (apss no. 402) reinforced cement concrete m 20 nominal mix using 12mm size hard granite machine crushed graded metal (coarse aggregate - as per is 383 - 1970 and is 2386 part 1 to part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete using concrete mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., ..complete for finished item of work (apss no. 402 & 403) for 50mm thick platforms for first floor reinforced cement concrete m 20 nominal mix using 12mm size hard granite machine crushed graded metal (coarse aggregate - as per is 383 - 1970 and is 2386 part 1 to part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete using concrete mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., ..complete for finished item of work (apss no. 402 & 403) for 50mm thick platforms for second floor reinforced cement concrete m 20 nominal mix using 12mm size hard granite machine crushed graded metal (coarse aggregate - as per is 383 - 1970 and is 2386 part 1 to part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete using concrete mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire charges of concrete mixer, laying concrete, lift charges, curing etc., ..complete for finished item of work (apss no. 402 & 403) for 50mm thick platforms for third floor providing thermo mechanically treated (tmt) (fe 500 / fe 500 d grade as per is 1786-1979) of different diameters for rcc works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 swg, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., ..complete for finished item of work.( apss no.126) for first floor providing thermo mechanically treated (tmt) (fe 500 / fe 500 d grade as per is 1786-1979) of different diameters for rcc works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 swg, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., ..complete for finished item of work.( apss no.126) for secondfloor providing thermo mechanically treated (tmt) (fe 500 / fe 500 d grade as per is 1786-1979) of different diameters for rcc works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 swg, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., ..complete for finished item of work.( apss no.126) for thrid floor masonry work in cm(1:6) prop (cement : sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 kg/sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (apss no. 501 & 504) for basement masonry work in cm(1:6) prop (cement : sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 kg/sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, ..etc., complete for finished item of work. (apss no. 501 & 504) for first floor masonry work in cm(1:6) prop (cement : sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 kg/sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, ..etc., complete for finished item of work. (apss no. 501 & 504) for second floor masonry work in cm(1:6) prop (cement : sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 kg/sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, ..etc., complete for finished item of work. (apss no. 501 & 504) for third floor reinforced masonry for partition walls (100 mm thick) in cm (1:4) prop. (cement : sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 kg/sq.cmand placing 2 nos. of 6mm m.s plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, fly ash cement / lime solid blocks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., .. but excluding cost of steel and its fabrication charges complete for finished item of work. (apss no. of 509) for first floor plastering 12mm thick single coat in cm(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by engineer-in-charge etc., ..complete for finished item of work (ss 901,903 & 904) for first floor flooring with non-skid red or white full body ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs as approved by engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., ..complete for finished item of work. (apss no.701 & 707) flooring with non-skid double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the engineer-in -charge, laying tiles using spacers of 2mm thick, set over a base coat of cm (1:8) prop. 12mm thick using screened sand over cc bed already laid or rcc roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of c.c. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the engineer- in-charge etc.,..complete for finished item of work. (apss no.701 & 707) providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by engineer-in-charge flushed to wall surface set over base coat of cm(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., ..complete for finished item of work. for first floor providing dadooing with glazed full body porcelain wall tiles of size 300mm x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved pattern as approved by engineer-in-charge flushed to wall surface set over base coat of cm(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., ..complete for finished item of work. for first floor providing 18 mm to 20 mm thick telephone black granite upto 2.43m as approved by the engineer-in-charge set over base coat of cement mortar (1:8) , 20mm thick using screened sand over cc bed already laid including neat grey cement slurry of honey like consistency spread @ 3.3 kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge, polishing charges, cost of base coat ..complete for finished item of work. for platforms for first floor providing 18 mm to 20 mm thick telephone black granite upto 2.43m as approved by the engineer-in-charge set over base coat of cement mortar (1:8) , 20mm thick using screened sand over cc bed already laid including neat grey cement slurry of honey like consistency spread @ 3.3 kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge, polishing charges, cost of base coat ..complete for finished item of work. for platforms for second floor providing 18 mm to 20 mm thick telephone black granite upto 2.43m as approved by the engineer-in-charge set over base coat of cement mortar (1:8) , 20mm thick using screened sand over cc bed already laid including neat grey cement slurry of honey like consistency spread @ 3.3 kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge, polishing charges, cost of base coat ..complete for finished item of work. for platforms for third floor supplying and fixing of pre-painted galvalume trapezoidal profile roofing sheets with 0.50mm thickness, coating: alu-zinc coating az150 gsm. tensile strength: 550 mpa. paint coating: regular modified polyester painting. painting thickness (top): 18 to 20 microns, (bottom): 5 to 7 microns. sheet width: 1.020, length: maximum 12 meters with regular range colours fixed with g.i ‘j’ bolts & nuts 8 mm dia with bitumen & g.i limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses including cost and conveyance of all materials , labour charges , etc., complete for finished item of work in all floors. supplying and fixing of ms doors, grill to windows / in open court yards using ms angles, flat, square bars including cost and conveyance of all materials, cutting, bending, welding, all operational charges, labour charges, etc., complete for finished item of work. supply & application of one coat water based cement primer of interior grade i and two coats of synthetic polymer luxury plastic emulsion paint of superior grade having voc (volatile organic compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., ..complete for finished item of work in all floors. supplying and fixing of 4 (101.6mm) multi floor trap with jali - upvc/swr pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , etc., complete for finished item of work. supplying and fixing of swr pvc pipes (prince/sudhakar/kisan/supreme or any isi brand) 4 kg/sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with pvc clamps if necessary with required number of bombay nails including cost and conveyance of all materials to site, labour charges, ..complete for finished item of work at all floor levels. (apss no. 1302 1319 & 1326) for 75mm dia supplying and fixing of swr pvc pipes (prince/sudhakar/kisan/supreme or any isi brand) 4 kg/sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with pvc clamps if necessary with required number of bombay nails including cost and conveyance of all materials to site, labour charges, ..complete for finished item of work at all floor levels. (apss no. 1302 1319 & 1326) for 110mm dia supply and fixing of ashirvad/ ajay/ astral flowguard or equivalent cpvc pipes and fittings sdr 11 to meet the requirement of astm-d 2846 and are produced in cts (copper tube sizes 1/2 to 2) for hot and cold water (is 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, ..complete for finished item of work at all floor levels. for 15.90mm od pipe supply and fixing of ashirvad/ ajay/ astral flowguard or equivalent cpvc pipes and fittings sdr 11 to meet the requirement of astm-d 2846 and are produced in cts (copper tube sizes 1/2 to 2) for hot and cold water (is 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, ..complete for finished item of work at all floor levels. for 22.20mm od pipe supplying and fixing gunmetal gate ( gm peet ) valve as per is-778 class - i , indian make heavy type including cost and conveyance of all materials , labour charges , ..complete for finished item of work. for 15mm nominal bore supplying and fixing gunmetal gate ( gm peet ) valve as per is-778 class - i , indian make heavy type including cost and conveyance of all materials , labour charges , ..complete for finished item of work. for 20mm nominal bore supplying and fixing indian make flat back wash hand basin 1st quality conforming to is:2556-part-4:1972 of size 550mm x 400mm with 32 mm nominal size c.p. fitting with parallel pipe thread conforming to is:2963-1979 and fitted with 15 mm nominal bore chromium plated pillar tap of 1st quality indian make heavy duty complete with standard ci brackets including wooden blocks ,1 no.12.70mm pvc connection with brass union nuts cp coated , angle stop cock 12.70mm dia. first quality indian make heavy duty, 31.75mm dia. pvc flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , ..for finished item of work supplying and fixing np bib taps of size 12.70mm dia of indian make heavy duty (short body) as approved by the engineer-in-charge including cost and conveyance of all materials, labour charges , ..complete for finished item of work in all floors. supply and fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with is:9537 part 3 frls rigid surface p.v.c. pipe (isi marked) on wall with all required pvc junction boxes confirms to is : 3419 and all accessories fixing on chromium plated metallic base saddles for run of mains including all labour charges etc., complete. including all labour charges etc., complete. makes: precision/universal& marudhar/vip / goldmedal / million plast / gm / sudhakar /polycab/anchor/ polyline/ orbit/akg/beljin/vasavi/dec wiring with 2 runs of 22/0.3mm ( 1.5 sq.mm) frls / frlsh / hffr / zhfr p.v.c. insulated 1100v grade as per is : 694 / 1990 specification flexible copper cable (isi marked) in existing pipe with 6a modular switch (isi marked) with cover plate, ceiling rose/bh/ sbh, including all labour charges etc., complete for light, bell, fan and exhaust fan points etc., complete. (for non residential building).makes of wires: finolex / rr kabel / havells/finecab/kei/polycab/gloster/goldmedal/gm/ fortune arrt/anchor/million/ apar(anushakthi)makes of switchs : legrand(myrius/lyncus)/schneider(clipsal x/livia ab)/ crabtree (murano/athena)/lauritz knudsen-englaze (formerly l&t)/ gm-(four-five)/goldmedal(gifa)/million (m-vee)/anchor (roma plus)/precision(series7)/honeywell(blenzepro) supply and run of 3 of 2.5 sq.mm (phase neutral and earth) frls / frlsh / hffr / zhfr p.v.c. insulated 1100v grade as per is : 694 / 1990 specification flexible copper cable in existing ms conduit pipe for individual ligting circuits including labour charges etc., complete as required for switch boards.makes: finolex / rr kabel / havells/finecab/kei/polycab/gloster/goldmedal/gm/ fortune arrt/anchor/million/ apar(anushakthi) supply and 3 runs of 4.0 sq mm (phase neutral and earth) frls / frlsh / hffr / zhfr p.v.c. insulated 1100v grade as per is : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16a sockets.makes: finolex /rrkabel/havells/finecab/kei/polycab/gloster/goldmedal/gm/ fortunearrt/anchor/million/ apar(anushakthi) supply & run of 5 of 10.0 sqmm (phases, neutral and earth) frls / frlsh / hffr / zhfr p.v.c. insulated 1100v grade as per is : 694 / 1990 specification flexible copper cable in the existing conduict pipe for run of mains from power panel board to tpn dbs with pin type lugs and connections etc., complete. [for pdbs] makes: finolex / rr kabel / havells/finecab/kei/polycab/gloster/goldmedal/gm/ fortune arrt/anchor/million/ apar(anushakthi) supply and fixing of 20-24w, not less than 1100mm length led batten light with extruded alluminium / crca housing and polycarbonate cover, input voltage ac 220 - 260 volts with pf>0.9, surge protection: 2kv, thd<15%, with high power leds having efficacy of ≥ 120 lumens / watt with inbuilt and replacable driver with earth connection brought outside and frosted cover cct: 3000k - 5700k, minimum cri>70 etc., complete including fixing on wall / ceiling with pvc/tw round blocks with all accessories including giving connections and all labour charges etc., complete with 5 years warranty.make: a) luminaire make : phillips / ge- venture / crompton / wipro / bajaj / havells / halonix/jaquar/hpl/gm / greenlites / gold medal/eveready// rhino/panasonicb) led make : philips lumileds / cree / nichia / osram / samsung/ everlight supply and transportation of 48 (1200mm) sweep star rated ceiling fan , with double ball bearings, air delivery more than 200 cubic meter/min but without regulator.makes: crompton (hs plus/hs) / havells (es plus/ss390es) /orient energy star/ halonix(zephyr)/polycab(synergy 50 isi) / g.m. (air wave premium)/bajaj-edge/arcline (glacier) labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads makes: finolex / polycab / havells / v-guard / gold medal / gm / million / vimal /airson/cri/ tamra/ ollvin/avocab