increasing capacity work in the area of edd behat opening of connection of100 kva t/f properly. 3 removal of 100 kva t/f on the d/p from site of works to esc, sre including loading & unloading at both ends (distance 0 to 35k.m.) 4 safely carriage of line material esc sre to site of works through privet vehicle including loading and unloading at both ends. (distance 0 to 35 k.m.) 5 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling of stay wire 7/10 swg and fitting the same on the pole 6 safety cartage of new 250 kva t/f from esc, sre, to the site of work at various sites including loading & unloading at both ends (distance approx. 35 k.m.) 7 constriction of plinth for installation of 250 kv t/f of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick rcc top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall as per respo specificaiton & fencing work as per repo specification. 8 safely installation ofnew 250 kv t/f on the plinth with proper alignment and complete fitting including making connection and commissioning 9 chemical earthing of 250 kva t/f (1 no body & 1 no. neutral earthing) by boring of 60 ft deep & fixing of 60 ft. g.i pipe 11/2 dia (jindal class b) and connecting with g.i. strip of size 40x5 mm and g.i wire at bottom of g.i pipe to the t/f providing of required charcoal & salt in the pipe 10 providing& fixing of brass lugs properly as per respo specification. 11 earthing of pole by earthing rod. 12 removal of old and used weasal conductor (80 kg)from site to esc saharanpur including loading and unloading both ends. 13 removal of old and used abc conductor (150 kg)from site to esc saharanpur including loading and unloading both ends. 14 tightening of loose stay 15 laying, lifting, stringing, sagging jumpring & binding of acsr rebbit conductorfor11 kv & lt line including complete. 16 laying, lifting, stringing, proper sagging abc cable of size 120 sq.mm. including fixing of all type clamps and connector providing all accessories 17 laying and making connection of lt pvc cable 1x240 sq.mm properly.