selection of working agency for deposit work in sub division deviganj under ee,edd, haidergarh, barabanki.- 1 safe loading, carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work 2 pcc pole /stp pole 8.5/11/13 mtr long 3 11kv pin insulator . 4 11kv disc insulator . 5 11kv x-arm 6 ms earthing rod 7 transformer 25 kva 8 transformer 63 kva 9 transformer 100kva 10 transformer 250/400kva 11 abc cable 3x95 sq. mm. 12 abc cable 3x50 sq. mm. 13 abc cable 1x25+1x16 sq. mm. 14 11 kv xple cable 15 acsr weasal conductor 16 lt d.b. box 17 11kv ct/pt unit 18 11 kv metering cubical/pilfer 19 stay set complete 20 other line material 21 dragging of pole from je dump store to site 22 erection of stay set of 16x1800 mm rod duly painted with red oxide, anchor plate, thumble turn buckle andstay insulate etc. 23 stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department) 24 pipe earthing ( boring type) each of 20 ft. deep 25 installation of mounting of following capacityof transformer including its connection between 11 kv and lt line mounting of copper l-pieces, provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor) 26 munting of 25 kva tranformer 27 munting of 63 kva tranformer 28 munting of 100 kva tranformer 29 munting of 250/400 kva tranformer 30 installation of fixing 11 kv ct/pt with required meterial. 31 installation of fixing 11 kv pilfer unit with required meterial. 32 errectionof substation type double pole with pcc pole 8.5 mtr. long including mounting of top channal dropper channel, base angle with clamps with nut & bolt 33/11 kv line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 kv pin & pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 33 errectionof singlepcc /st pole for stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 34 stringing and sagging of lt 1x25 abc cable (lt abc cable will be provided by the department) 35 stringing and sagging of lt 3x50 abc cable (lt abc cable will be provided by the department) 36 stringing and sagging of lt 3x95 abc cable (lt abc cable will be provided by the department) 37 installation of d.b. box 38 earthing of pole with ms earthing. 39 provinding & fixing of various type materials. all materials shall be supplied by the contractor. 40 nut & bolt 41 different size of lug 42 clamp for top/ dropper and t-off channel etc. 43 gi pipe 3&4 dia 44 dead end clamp with j-hook 45 suspension clamp 46 peircing connectores /clamp 47 looping and choopping of tree branches in laying on the route of line. 48 concreating and pilinthing of st& pccpole 18x24 cm. 49 laying of 11kv xlpe cable 3x70, 120,185 sq.by mm manually 50 testing ofxlpe cable all size. 51 hosting of cable all size. 52 fabricate with hole suitable size in steel items, receive from central store lightas top channel/dropper channel substation base angle etc. 53 looping of cable and mounting of pole. 54 other line material or work 55 fencing for 250/400 kva transformer (as per norms of uppcl) 56 construction of masonry type transformer plinth of size 1.5×1.5×1.5 m with brick, cement, coarse sand, sand & brick ballast, filling of sand in the hollow space, plastering outer surface in ratio 1:4:6 top of the plinth 4” thickness grouting of 2 nos. ms channel of size 100×50×200 mm on the top of the plinth for placement of transformer. (all the material will be arranged by the contractor)