tender for annual plan-148/25-26 thravott anganwai improvement work -thravott anganwai improvement work in keezhattur -general civil work - renovation work 2 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 3 11.37:providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 4 17.10.2.3:providing and fixing stainless steel a isi 304 (18/8) kitchen sink as per is 13983 with c.i. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:kitchen sink without drain board470x420 mm bowl depth 178 mm 5 17.13.2:providing and fixing white vitreous china water closet squatting pan ( indian type):orissa pattern w.c. pan of size 580x440 mm 6 od278934/2025-2026:providing and fixing 150 mm wide, square cut pvc 4kgf/cm2 rain water gutter pipe with iron brackets with 25x5 mm size flat, screws and washers etc., including making necessary connections with rain water pipes etc. complete. 7 50.12.4.2:providing and fixing false ceiling with 7.5 mm thick pvc wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) 8 21.5:providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to is : 733 in frames of false ceiling including aluminium angle cleats with necessary c.p brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to g.i level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the engineer-in-charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). 9 od278968/2025-2026:supplying and providing pvc door with frame 50x 40x 2mm and shutter with shutter frame 60mm wide and 25mm thick pvc hollow panels including all charges 10 50.9.6.3:providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. using vengai wood 30 mm thick shutters 11 17.7.4:providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china flat back wash basin size 550x 400 mm with single 15 mm c.p. brass pillar tap 12 50.18.9.2.2:providing and fixing pvc pipes includings of pipes with one step pvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. 20 mm dia 10 kgf/cm2 13 50.18.9.6.2:providing and fixing pvc pipes includings jointing of pipes with one step pvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. 50 mm dia 6 kgf/cm2 14 13.48.1:finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 15 13.88:removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 16 13.62.1:painting with synthetic enamel paint of approved brand and manufacture of required colour to givean even shade:two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .