tender for miscellaneous minor capital works in airside city side at pakyong airport; providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 12:4 (1 cement 2 coarse sand (zone-ill) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) 18.00 cum 0.00 15 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1:4:8 (1 cement: 4 coarse sand (zone-iii) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) 21.00 cum 0.00 16 4 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.2 cement mortar 1:6 (1 cement: 6 coarse sand) 12.00 cum 0.00 17 chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of ties, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 11.20, 4 ordinary cement without fx 5 675.00 sqm 0.00 11.20.4 ord chequered querred precast cement concrete ules 22 mm sex rocompam & courtyard, jointeer wer neat cement surry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of mortar 1:4 (1 cement: 4 coarse sand). (old chequerred precast cement concrete tiles shell be provided by the department) 1 of cement 18 6 1011.00 sam 0.00 19 7 taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of engineer-in-charge 900.00 mtr 0.00 20 8 21 22 10 23 11 sheet 1 of 2 providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shal not to more than 5mm), including making drainage opening wherever required complete elc, as per direction of engineer-in-charge (length of finished kerb edging shall be measured for payment). (precast c.c. kerb stone shall be approved by engineer-in-charge) laying at or nea near ground level old kerb stones of all types in positionto the required ine, level and curvature, jointed with cement mortar 3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of engineer-in-charge (lengthof finished kerb edging shall be measured for payment). (oid kerh stones shall be suppiled by the department free of cost) painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade 13.99.1 one or more conts on old work painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture