View Bid Results For Yarns Tenders

We found 2988 Bid Results related to yarns tenders. You can find Contractor details who won yarns tenders along with contract details in Bid awards announcements section.

Filters
Stage
2593
258
137
Tender Publishing Platform
1360
1628
State / UT
37
419
279
274
256
245
207
121
114
110
109
100
84
83
77
76
70
62
50
44
34
31
21
16
15
14
13
12
11
10
9
8
4
3
3
2
1
1
Contract Value
1051
1030
667
223
Publish Date
14
1
0
0
0
Sector
32
643
399
390
171
155
132
129
128
120
93
92
73
61
54
36
35
35
34
34
32
24
21
16
16
15
14
14
9
7
3
2
1
Ownership
7
1485
707
369
274
95
57
1
Within keyword
Active filters:
Showing 1–50 of 2988 tenders matching your filters
2.
Housing Urban and Rular Development #11419101 AOC
Tender for Procurement Of Various Hostel Furniture (Bed, Table, Chair Etc.) For Redevelopment Of Scb Mch Cuttack, Phase-I Residential Package , Hostel Unit (Bed, Mattress,Pillow, Study Table & Chair) , Supply & Installation Of Single Bed With Storage Bed Size: 2050Mm Length, 955Mm Width And 430Mm Height, Side Thickness 20Mm. Headboard: 955Mm Width & 940 Mm Height, Thickness 38Mm Foot-Board: 955Mm Width & 470 Mm Height, Thickness 38Mm Storage: Single Horizontal Partition, Top Open Box Storage Length= 1990Mm (995 X 2), Box Storage Depth= 320 Mm, 3 Hinges And 2 Handles. Bed Rest And Floor Rest Will Have 18Mm Ply With Laminates In Both Sides And Every Part Of The Bed. The Lower Base And Upper Base Of The Bed Will Have 12 Mm Thick Bwp Plywood With Laminate On Top Surface. 18 Mm Thick Bwp Plywood With 15 Years Warranty With All External Visible Surface Factory Pasted Laminate With 1.5Mm Thick And Inside Surface 0.70 Mm Thick White Laminate Factory Pasted. 2Mm Pvc Edge Banding On Headboard And Footboard With Corner Rounding In The Exposed Edges With Through Feed Edge Banding Machine With Help Of Hot Melt Glue Above 200 Degree Celsius. 0.8Mm Edgebanding On All Other Surface Of Plywood With Edge Corner Rounding Through Feed Edge Banding Machine With Help Of Hot Melt Glue Above 200 Degree Celsius. Mosquito Net Stand ¾M.S Pipe Of 2Mm Thickness. Hardware: Heitich/ Yale / Doorset/ Hafele/ Ebco. Plywood Bwp: Archidply/ Century Ply/Green Lam. Laminates: Greenlam /Century/ Archidlam. The Plywood And Laminate Shall Be Of Same Make.Fixing Shall Be Made With Bed Jointers Of Heavy Duty Isi Marked To Make The Bed Modular. There Shall Be Polypropylene Buffers Fitted For Making The Floor Scratch Resistant. The Fittings Will Be Kd Fittings Format Like Minifix And Barrelnut. The Side Joint With Headboard And Foorboard Must Have 75Mm L Corner. , Mattress Dimension - 1800Mm X 900Mm, Number Of Layers-Two Layers, Thickness Of Core Layer} - 50Mm, Thickness Of Core Layer2 - 50Mm, Material Of Core Layerl: Pu Foam, Material Of Core Layer2: Pu Foam, Quilting : Both Side Quilting (Double Sided), Thickness Of Quilting:8Mm, Fabric Composition: Polyester, Construction: Woven, Fabric Mass :80Grn/M2, Core Layer I Density : 28 Kg/M3, Core Layer 2 Density :28Kg/M3 . Compression Set For Pu Foam : 10%,Durability Test For Complete Mattress: Loss Of Height Not More Than 13Mm. Resistance To Ageing For Pu Foam As Per Is 7888 Latest: Shall Meet The Requirement Of Is 7933 Latest. Durability Test For Pu Foam As Per Is 7888 Latest: Shall Meet The Requirement Of Is 7933 Latest. Durability Test For Complete Mattress: Loss Of Height Not More Than 13Mm As Per Astm 1566.Warranty 1 Year. Test Report To Be Furnished To Buyer On Demand , If Claimed To Be Available. Approved Makes: Sleepwell/ Duroflex/Kurl-On/ Godrej/ Flo Mattress , Pillow Conforming To Standrads: Dgqa providing Specn No. S/1706/Synthetic Pillow/ Tc-6 Length: 700Mm, Width: 400Mm, Height Of Pillow At Centre 170Mm Body Fabric: Cloth Plain Weave Polyester Cotton (67:33) White Ends Per Cm: 40 Picks Per Cm: 30 Body Fabric Mass (G/Sqm): 110 Filling Material: Hollow Siliconised Polyester Fibre Of 7 Denier Mass Of Filling Material (G): 625 Total Mass Of Synthetic Pillow (G): 715 Reinforcing/ Piping: Shroud Laid Cotton Line Of 2 Mm Dia Availability Of Test Report From Designated Ahsp,Nabl/ Ilac Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification , Supply & Installation Of Study Desk Length= 1200 Mm, Width= 600 Mm, Height= 750 Mm One Drawer And One Storage With Adjustable Self, Modesty Panel On The Back Side With Size Of 1150 Mm X 375Mm And A Foot Rest In The Bottom Size 820Mm X 100 Mm. Drawer Facia 420Mm X 150Mm With 450Mm Telescopic Channel & Storage Facia: 420Mm X 460Mm Magnetic Close Auto Hinges Chrome Coated And Locking Arrangements, Hole With Grommet For Cable Management. Top Of The Table Will Be 38 Mm Thick, Side Of The Table Will Be 25 Mm Thick And Drawer Botton Will Be 6Mm Thick. All The Other Parts Of The Table Will Be Made From 18 Mm Ply. 18 Mm Thick Bwp Plywood With 15 Years Warranty With All External Visible Surface Factory Pasted Laminate With 1.5Mm Thick And Inside Surface 0.70 Mm Thick White Laminate Factory Pasted. 2Mm Pvc Edge Banding On Top Surafce With Corner Rounding In The Exposed Edges With Through Feed Edge Banding Machine With Help Of Hot Melt Glue Above 200 Degree Celsius. 0.8Mm Edgebanding On All Other Surface Of Plywood With Edge Corner Rounding Through Feed Edge Banding Machine With Help Of Hot Melt Glue Above 200 Degree Celsius. Hardware: Heitich/ Yale / Doorset/ Hafele/ Ebco. Plywood Bwp: Archidply/ Century Ply/Green Lam. Laminates: Greenlam /Century/ Archidlam. The Plywood And Laminate Shall Be Of Same Make. There Shall Be Polypropylene Buffers Fitted For Making The Floor Scratch Resistant. The Fittings Will Be Kd Fittings Format Like Minifix And Barrelnut. , Supply & Installation Of 4 Leg Chair Supply And Installation Of Item Size Seat Assembly: The Seat Assembly Should Be Made Up Of 1.2 ±0.Lcm. Thick Hot-Pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47 .0 Cm. (W) X 48.0 Cm. (.D) Back Assembly: The Back Asembly. Should Be Made Of Powder Coated (Oft 40-60 Microns) Tubular Frame Of O 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm. (W) X 60.5Cm. (H) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgf For 25% Compression. Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. Tubular Frame: The Powder Coated (Oft 40-60.Microns) Tubular Frame Should Be Cantilever Type & Made Of (62.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube. The Chair Seat Should Be Provided In 2 Colors (Red & Blue) Approved Makes: Godrej/ Geeken/ Featherlite
Contract Date: Jun 30, 2026 Contract Value : 9.58 Crore
Government Departments No of Bidders 5
4.
Health and Family Welfare #11383742 AOC
Supply Of Furniture Items To Government Medical College At Suryapet In Suryapet District.=150 Student Cot With Mattress & Pillow 1 Scope: This Specification Is For The Requirement Of Iron Cots Suitable For General Purpose In Hospitals. 1.1 Dimensions 2.1 Over All Dimensions Of Cot Of Size Top Frame ( Sheet ) Shall Be Length 1910 Mm, Width 910 Mm And Height 470 Mm With Bushes. 2.2 The Various Tubes Used In Manufacture Of Iron Cots Should Have The Following Outside Diameter And Thickness. Component Outside Dia ( Mm ) Thickness ( Mm ) A Bows Outer Cr Tubes -38.10.Mm X 1.60Mm B Cross Tubes Cr Tubes 25.40 Mm X 1.22 Mm C Filling Tubes Cr Tubes 19.05 Mm X 1.22 Mm 2.3 The Ms Flat For Top Shall Be Inside All Four Sides Of Size 50X3 Mm Minimum Thickness Of 3.0 Mm. 3 Material: 3.1 Frame Work Shall Be Of Cr Sheets Conforming To Is: 513 D Quality. 3.2 Bows & Tubes: These Shall Be Made From Cr Steel Tubes. 3.3 Shoes: These Shall Be Manufactured From Pvc / Hard Rubber Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. 4 Manufacture 4.1 Head End: Construction Of The Head End Shall Comply To Meet Requirement Given 4.2 Bows Shall Be Manufactured From Steel Tubes. It Shall Be Bent, With Inside Radius Of Not More Than 125 Mm At Top 2 Corners Cr Sheet Brackets . Bracket Of 3 Mm Thickness, Shall Be Welded With The Bows Vertical Upright Members Which Allows Frame To Rest On It An 4.3 Cross Tube: One Horizontal Cross Tube For Making The Structure Of The Bow Rigid Shall Be Welded Between The Vertical Upright Members Of The Bows. Cross Tube Shall Be Welded Below The Sleeping Level At A Height Of 200 Mm From The Bottom. 4.4 Filling Tubes: The Three Vertical Filling Tubes Shall Be Welded To The Cross Tube And To The Bow. They Should Be Spaced At Regular Intervals. The Height Of The Head End Bow Shall Be About 610 Mm. 4.5 Foot End Bow: It Shall Be Similar To 4.1.1 To 4.1.3 Except Leg Bows, Which Shall Be Of 570 Mm Height. 4.6 Mattress Platform: This Shall Comply With The Requirements Given Below:- The Bed Frame Shall Be Made From C.R. Sheet Double Bent. It Should Be Reinforced With Three Formed Channels To Size 20 X 50 X 50 X 50 X 20 Mm Of 1.25Mm Thickness Flanges Welded Inside The Length Wise. With 3 Years Warranty Finish As Per General Condition Of Tender 100 Almarah Steel Full Size Multi Bend Construction And Inter Locking Design And Full Length Over Lapping Doors And Side. Three Way Bolting Mechanism. Spot Welding &Ark Welding. Anticorrosion Treated Components. Dimensions Outer: 1980 H X 910 W X 480 D Mm Main Door With Shetters Top, Bottom Lh & Rh Sides, Shelves And Back All Materials Thickness Not Less Than 1 Mm Almariahs To Be Provided With 4 Full Fixed Shelves Of Inside With 5 Compartments. Shelve Size 908 X 430 Mm Crca Steel: Cold Rolled Close Annealed Steel Used For Thickness 0.6 To 1.0 Mm Range As Per Is-513 1994 ( Reaffirmed In1998 ) . Grade ‘D’ Or ‘Dd’ Quality. Chemical Composition, Tensile Properties, Bend Test, Surface, Flatness, Hardness As Per Is-513 1994. Hot Rolled Steel Used For Thickness 2.0 To 3.15 Mm Range As Per Is-1079 1994 Is-1079 1994 ‘D’ Quality Or Is-10748 1995 Grade-Ii. Chemical Composition, Tensile Properties, Bend Test, Surface Flaws, Roll Mark, Dent & Lines Etc. Weight 80 Kgs Finished General Condition With 3 Years Warranty Finish As Per General Condition Of Tender 100 Chairs For Office 1. Seat / Back Assembly: The Seat And Back Are Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. The Chair Is Available In Three Models. Mid Back Size 47.5 Cm. ( W ) X 58.0 Cm. ( H ) *Pch-9U01rg / 9U02rg / 9U12rg Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. 3. Armrests: The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene. 4. Center Tilt Synchro Mechanism ( For 9U01rg / 9U02rg ) : The Mechanism Is Designed With The Following Features: · 360° Revolving Type. · 3 Position Locking · Tilt Tension Adjustment 5. Tubular Frame ( For 9U12rg ) : The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Is Cantilever Type & Made Of Ø 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. 6. Pneumatic Height Adjustment ( For 9U01rg / 9U02rg ) : The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm. 7. Telescopic Bellow Assembly ( For 9U01rg / 9U02rg ) : The Bellow Is 3-Piece Telescopic Type And Injection Moulded In Black Polypropylene. 8. Pedestal Assembly ( For 9U01rg / 9U02rg ) : The Pedestal Is Injection Moulded In Black 33%Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3 ±0.5Cm. Pitch-Centre Dia. ( 76.3 ±1.0Cm With Castors ) . 9. Twin Wheel Castors ( For 9U01rg / 9U02rg ) : The Twin Wheel Castors Are Injection Moulded In Black Nylon. Overall Dimensions Of Chair Width ( W ) : 76.3 Cm. Depth ( D ) : 76.3 Cm. Height ( H ) : 85.5-97.5 Cm. Seat Height ( Sh ) : 42.5-54.5 Cm Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. 50 Teachers Classroom Table Lecture Table Size: 1500 L X 600 D X 750 Ht System: Angular Legs Specification: Table Top: 25Mm Thick Pre-Laminated Particle Board Finished With 2Mm Pvc Edge Banding On All Exposed Edges. Under Structure: Ms Powder Coated Switch Angular 40X40 Legs And Ms Powder Coated Cross Beams ( 40X20 ) Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge.. 250 Examination Hall Table 1 Dimensions: 750 Mm X 450 Mm X 750 H Mm 2 Material : 2.1 A ) Plb / Plt – Top 2.2 Impregnated Base 18Mm Thickness With 2Mm Thick Hot Pressed Pvc Beading 2.3 C ) Under Structure : This Table Comes With A Square Tube Under Structure With Prime Quality C.R Tube Steel. 3 All Steel Tubes Used For Desk Under Structures Are As Per Is-3601-1984, Is- 7138-1973, Is-4923-1985. 4 Top Frame And Legs :30 X 30 C.R Square Tube 1.2Mm Thickness With One Foot Steps. 5 These Shall Be Manufactured From Pvc Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm With 3 Years Warranty Finish As Per General Condition Of Tender 120 Lecture Hall Dual Desk Bench For ( 2 ) Students Genii 2Strfr+Rr Plt Choco Sm6 1240 X 1130 X 757 Desk-Top Panel-All Panels Are Made From 18Mm Thk Pre-Laminated Twin Board ( E1 / P2 Grade ) With Pvc Edge Banding On All Sides.The Panels Have Cornersrounded For Safety Usage. Understructure - All Side Metal Frames And Cross Connectors Are Made From Combination Of 25.4 X1.2 Mm Thk ( Approx. 18 Swg ) Round Erw Tubes , 31.8 X 1.2 Mm Thk ( Approx. 18 Swg ) Round Erw Tubes And 28.6 X 1.2 Mm Thk ( Approx. 18 Swg ) Round Erw Tubes ( As Per Is:7138 ) Which Are Welded Together.The Welded Structures And Cross Connectors Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating.Back Supports Which Are Provided At The Rear Back Are Made Of 50.8 X 25.4 X 1.2 Mm Thk ( Approx. 18 Swg ) Rectangular Erw Tubes ( As Per Is:7138 ) .The Tubes Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating.The Storage Shelves Are Made From 0.6 Mm Thk Ms Sheet ( As Per Is:513 ) Fixed Below The Radesk Top Panel And Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating. Hooks Are Provided On The Vertical Side Frames On Both Sides Of The Desk For Hanging Bags / Bottles. They Are Made From 2 Mm Thk Ms Sheet ( As Per Is:513 ) And Are Coated With Min. 45 Micron Thickness Of Epoxy Polyester Coating.The Understructure Is Assembled Using M6 Trilobular Screws ( As Per Din 7500 ) With Zn Blue Plating.Compact Laminate Seat And Back Panels Are Assembled Using M6 Counter Sunk Trilobular Screws ( As Per Din 7500 ) With Zn Black Plating ( As Per Is 1573:1986 ) Spacers Are Provided On Th Top Of Round Tubes For Wooden Panels Fixing. They Are Made Of Made Glass Filled ( 30% ) Plastic Caps Made Of Pp Copolymer ( 3530 Grade ) Are Also Provided On The Rear Frames Adding More Aestheic Value To The Product.M6 High Tensile Tvs Make Bolt ( Class 8.8 ) With Glasss Filled Nylon Level Adjustors Are Provided At The Bottom Of Understructure To Take Care Of Unevenness In Floor With Height Adjustment Of Approx 15Mm Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge.. 25 Table ( Office Table Big Size ) 1 Dimensions:1450 W X 680 D X 750 H ( In Millimetres ) 2 Material: 2.1 A.Plb / Plt - Top 25 Mm Thickness. 3 All Plb And Plt ( Prelaminated Twin ) Is Of Following Grade. 4 Grade Ii Type Ii – Designation – Plb-22 ( As Per Is: 12823 – 1990 ) 5 Each Plb / Plt May Contain Following Material Layers: 6 Particle Board, Top With 2Mm Thick Hot Pressed Pvc Beading With Keyboard Moulded Type. 7 C. Under Structure: This Table Should Be Square Cr Tube 30 X 30 Under Structure With Prime Quality C.R Steel Square Tube 1.22Mm Thickness. 8 D. Storage: 3 Draw & 2 Draw Metal Is Provided For Storage. One Side 2 Draw And Other Side 3 Draw Metal Shall Be Provided. 9 Drawer: • Box-Box-File : Dimensions 390 W X 430 H X 560 D Mm, Construction & Material:Welded Assembled, Crca As Per Is-513.• Back , Sides, Top & Bottom , Box 0.6 Think. Drawer Tray & Front- 0.8 Mm. Crca As Per Is-513 , Drawer Slides Used Must Be Of Heavy Duty Telescopic Channels 10 All Steel Metal Components Are Manufactured From Finest Quality Steel, Which Conforms As Per Is-513 Grade D, Dd 11 All Steel Tubes Used For Desk Under Structures Are As Per Is-3601 – 1984, Is-7138-1973, Is-4923-1985. 12 Shoes - These Shall Be Manufactured From Hard Rubber Or Pvc And Shall Be Uniform In Texture And Chemically Inactive To The Action Of Mild Acids. The Nominal Height Of The Shoes, Shall Be 35Mm. With 3 Years Warranty Finish As Per General Condition Of Tender 500 Student Study Table 1 Study Table Of Size 1200 Mm X 600Mm X 750Mm Having Wood Laminate Finish The Table Top / Work Surface: Made From 25Mm Thick Plb With Pvc Lipping. Side Panels: Made From 18Mm Thick Plt With Pvc Lipping. Modesty Panel: Made From 18Mm Thick Plt With Pvc Lipping. Neat Wiring Flow With Cut-Outs On Both Sides, Free Standing Pedestal For Adequate Personal Storage. 2 Material: 3 A.Plb / Plt - Top 25 Mm Thickness. 4 All Plb And Plt ( Prelaminated Twin ) Is Of Following Grade. 5 Grade Ii Type Ii – Designation – Plb-22 ( As Per Is: 12823 – 1990 ) 6 Each Plb / Plt May Contain Following Material Layers: 7 Particle Board, Top With 2Mm Thick Hot Pressed Pvc Beading With Keyboard Moulded Type. 8 C. Under Structure: This Table Should Be Square Cr Tube 30 X 30 Under Structure With Prime Quality C.R Steel Squre Tube 1.22Mm Thickness. 9 D. Storage: Single Drawer Is Provided For Storage With Right Side With Metal Shall Be Provided. 10 Drawer: • Box-Box-File : 550 X 420 X 390, Construction &Material:Welded Assembled, Crca As Per Is-513.• Back , Sides, Top & Bottom , Box 0.6 Thick. Drawer Tray & Front- 0.8 Mm. Crca As Per Is-513 , Drawer Slides Used Must Be Of Heavy Duty Telescopic Channels 11 All Steel Metal Components Are Manufactured From Finest Quality Steel, Which Conforms As Per Is-513 Grade D, Dd 12 All Steel Tubes Used For Desk Under Structures Are As Per Is-3601 – 1984, Is-7138-1973, Is-4923-1985. 13 Shoes: These Shall Be Manufactured From Pvc / Hard Rubber Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. 14 Finish As Per General Condition Of Tender With 3 Years Warranty Finish As Per General Condition Of Tender 60 3 Seater Visitor Chair Supply Of Orbit 3 Seater Visitors Chair, *Cushioned Seat And Back *Silver Grey Finish With Arms Model No. Sj-708La Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. With 3 Years Warranty Finish As Per General Condition Of Tender 200 Almarah Steel Full Size Multi Bend Construction And Inter Locking Design And Full Length Over Lapping Doors And Side. Three Way Bolting Mechanism. Spot Welding &Ark Welding. Anticorrosion Treated Components. Dimensions Outer: 1980 H X 910 W X 480 D Mm Main Door With Shetters Top, Bottom Lh & Rh Sides, Shelves And Back All Materials Thickness Not Less Than 1 Mm Almariahs To Be Provided With 4 Full Fixed Shelves Of Inside With 5 Compartments. Shelve Size 908 X 420 Mm Crca Steel: Cold Rolled Close Annealed Steel Used For Thickness 0.6 To 1.0 Mm Range As Per Is-513 1994 ( Reaffirmed In1998 ) . Grade ‘D’ Or ‘Dd’ Quality. Chemical Composition, Tensile Properties, Bend Test, Surface, Flatness, Hardness As Per Is-513 1994. With 3 Years Warranty Finish As Per General Condition Of Tender 200 Open Rack 1 Steel Slotted Angular Racks, Open Type With 6 Shelves Making 5 Compartments Of Size 1800Mm X 900Mm X 450 Mm, Cr Sheet Shelfs 1.2Mm Thickness With An Angle Of 2 Mm Thickness And Size: 40 Mm X 60 Mm, With 8 Corner Brackets Of 2 Mm Thickness. 2 Finish: Sheet Metal Components: All Dents, Burrs And Sharp Edges Shall Be Removed From The Various Components. The Components Shall Be Individually Pickled, Scrubbed And Rinsed To Remove Grease, Rust, Scale Or Any Other Foreign Element. Immediately After Pickling, All The Mild Steel Parts Shall Be Given Phosphate Treatment Conforming To Class C Or Is : 3618-1966. 3 The Process For Application Of Phosphate Coating Shall Be In Accordance With Is: 6005-12970. Two Coats To Enamel Paint ( Colour Grey Is Preferred ) Shall Then Be Applied As Follows: Finish Coat With Enamel Paint Conforming To Is : 151-1950, Is : 2932-1974 Or Is : 2933-1975. In The Case Of Stoving Enamel The Components Shall Thereafter Be Backed At A Specified Temperature In An Over Heated Uniformly. The Finish Shall Be Smooth And Uniform With A Hard And Touch Film Of Enamel, Strongly Adhering To The Surface. The Finish Shall Be Free From All Visible Defects And Shall Not Chip When Tapped Lightly With A Dull Pointed Instrument. Note: Putty Shall Be Applied To All The Surfaces Requiring Filling And Shall Conform To Is: 110-1968. 4 Tests: The Performance Tests Required For The Finished Racks Shall Be Carried Out As Per The Methodology Mentioned In The Is 6189:1985. The Rack Shall Have A Name Plate Or Label Fixed To It Showing The Manufacturer’S Name, Initials Or Recognized Trademark. 5 Hospital Furniture Items Shall Be Subjected To Tests In Accordance With The Requirements Of Relevant Specifications. However, The Painted Furniture Items Shall Also Satisfy The Adhesion Test And In Addition Satisfy The Performance Test Give Below: 6 Shoes: These Shall Be Manufactured From Pvc / Hard Rubber Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. With 3 Years Warranty Finish As Per General Condition Of Tender 25 Dining Table With Benches Supply Of Dining Table, Specification: Size 93 L X 30W X 30H With 8 Seater, Top In 18 Gauge Of 304 Grade Stainless Atell , Legs In 1 1 / 2 X 1 1 / 2 Square Tube Stainless Stell In 16 Gauge Of 304 Grade With Foldable Benches As Directed By The Engineer-In-Charge. With 3 Years Warranty Finish As Per General Condition Of Tender 25 Library Table Size: 1800 X 900X 750 Mm The Understructure Should Be Available In Cr Square Tube. It Should Be Fixed And Shall Accommodate 6 People The Table Top Should Be 25 Mm Thick Pre Laminated Particle Board With Teak Wood Beading 40 Mm Thickness With Polish Top Frame And Legs Crs Quare Pipe 40X40 Mm, 1.6 Mm Thickness With 6 Legs Two Support Footrust With 35 H X 3Mm Pvc Bush. With 3 Years Warranty Finish As Per General Condition Of Tender 5 Principal Table Supply Of Cabin Table, Main Table Of Size 2400 L X 900 D X 750 Ht, Side Composite Storage Unit Size 1350 L X 450 D X 750 Ht, System - Enrich Series. Specifications: Table Top: 25Mm Thick Pre-Laminated Particle Board With 2Mm Pvc Edge Lipping On All Exposed Edges. Under Structure: Supported On Chrome Plated Enrich Legs Supporting On Ms Powder Coated Cross Beams ( 40X20 ) . Modesty Panel: 18Mm Thick Plt Modesty Panel Of 450Mm Ht. Wire Management: Anodised Finish 350 X 150 Flip Up Box With Soft Closures, Without Sockets And Switches Are Provided, Pvc Cable Dump & Vertical Wire Entry Cover For Wire Uptake From Floor To Cable Tray. Storage Unit Top - 25Mm Thick Pre Laminated Particle Board With 2Mm Pvc Edge Lipping. Body, Shelfs & Shutters – 18Mm Thick Pre Laminate Particle Board With 2Mm Pvc Edge Lipping. Back – 9Mm Thick Pre Laminate Particle Board With 2Mm Pvc Edge Lipping. Lock - Regular Lock. Handle - Finger Grooves Hardware – Door Closing Hinges, Mini-Fix, Levellers & Locks, Etc., Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. 5 Executive Chair For Principal Pulse Hb Mb Seat, Adj. Arms Larger Seats Head Rest 1.Seat / Back Assembly: The Seat Is Made Up Of 1.5 ± 0.1Cm Thk. Hot Pressed Plywood Measured. The Back Is Made Up Of Injection Moulded Glass Filled Polypropylene & Upholstered Using Net Fabric With High Tenacity Yarn. *Seat Size ( Larger Seat Depth ) { Pulsal } : 47.0 Cm. ( W ) X 51.5 Cm. ( D ) *Back Size ( Pulsax, Pulsal ) : 45.0 Cm. ( W ) X 65.3 Cm. ( H ) 2.High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density =55+ / -2 Kg / M3 And Hardness 16 ± 2 Kgf As Per Is:7888 For 25% Compression. 3.Armrests ( Adjustable ) { Pulsax, Pulsal } : The Adjustable Armrest Is Designed With The Following Features: •Up-Down Adjustment- 6 Steps ( 7.2 ± 0.5Cm Range ) •Armrest Top Is Mounted On Armrest Structure Made Of Glass Filled Nylon. •Armrest Top Is Pu Moulded Over Glass Filled Nylon Insert. 4.Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad.The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pad. Lumbar Pad Has An Adjustment Of 8.0 ± 0.5 Cm In Height. 5.Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features. •360° Revolving Type. •Single Point Control. •Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort. •Tilt Tension Adjustment. •4-Position Locking With Anti-Shock Feature. •Seat / Back Tilting Ratio Of 1:2. 7.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3 Cm. 8.Pedestal Assembly: The Pedestal Is Injection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Pitch-Center Dia Is 066.1 ± 0.5 Cm. ( 76.1 ± 1.0 Cm. With Castors ) . 9.Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon. Overall Dimensions Of Chair Width ( W ) : 76.1 Cm Depth ( D ) : 76.1 Cm Height ( H ) : 98.0 - 108.0 Cm Seat Height ( Sh ) : 45.8 - 55.8 Cm. Neckrest : The Neckrest Assembly Consist Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric Neckrest Is Fixed To Back Assembly Through Neckrest Connector Neckrest Assembly Has Height Adjustment Of4.2 + 0.5 Cm And Rotation Adjustment Of Overall76”+ 2”. The Complete Neckrest Assembly Is Retro Fit To The Main Chair Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. 50 Alamarah With Acrylic ( Glass ) Door 1. Multi Bend Construction And Inter Locking Design And Full Length Over Lapping Doors And Side. Three Way Bolting Mechanism. Spot Welding & Co2 Welded. Front Side Doors With Acrylic Transparent Sheet All Round Frame 70 Mm Borders Thickness 5.5 Mm Thickness 2. Dimensions Outer: 1980 H X 910 W X 480 D Mm 3. A. Top, Bottom, Lh & Rh Sides And Back Material Thickness- 1 Mm 4. B. Removable Rh & Lh Main Doors With Stiffeners Material Thickness =1.22 Mm 5. Almariahs To Be Provided With 4 Full Fixed Shelves Of Inside Shelve Size Of 908 W X 420 D Of Thickness -1 Mm 6. Cr Steel: 7. Cold Rolled Close Annealed Steel Used For Thickness 0.6 To 1.2 Mm Range As Per Is-513 1994 ( Reaffirmed In 1998 ) . Grade ‘D’ Or ‘Dd’ Quality. Chemical Composition, Tensile Properties, Bend Test, Surface, Flatness, Hardness As Per Is-513 1994. 8. Finish As Per General Condition Of Tender With 3 Years Warranty Finish As Per General Condition Of Tender 25 Office Table With Draws ( Office Table Small Size ) 1. Dimensions:1200 W X 600 D X 750 H Mm 2. Material: 2.1 A.Plb / Plt - Top 25 Mm Thickness. 3. All Plb And Plt ( Prelaminated Twin ) Is Of Following Grade. 4. Grade Ii Type Ii – Designation – Plb-22 ( As Per Is: 12823 – 1990 ) 5. Each Plb / Plt May Contain Following Material Layers: 6. Particle Board, Top With 2Mm Thick Hot Pressed Pvc Beading With Keyboard Moulded Type. 7. Under Structure: This Table Should Be Square Cr Tube 30 X 30 Under Structure With Prime Quality C.R Steel Square Tube 1.22Mm Thickness. 8. D. Storage: 3 Draw Is Provided For Storage. With Right Side With Metal Shall Be Provided. 9. Body For Storage Units: Body And Draws For Storage Unit Dimensions 390 W X 430 H X 560 D Mm Shall Be Made From Cr Steel Sheet Not Less Than 0.8 Mm Thick With Heavy Duty Telescopic Channels. This Shall Be Bent To Box Shape From One Piece And Tack Welded At Final Overlapped Comer Or Assembled With A Maximum Of Two Pieces Properly Welded 10. All Steel Metal Components Are Manufactured From Finest Quality Steel, Which Conforms As Per Is-513 Grade D, Dd 11. All Steel Tubes Used For Desk Under Structures Are As Per Is-3601 – 1984, Is-7138-1973, Is-4923-1985. 12. Shoes - These Shall Be Manufactured From Hard Rubber Or Pvc And Shall Be Uniform In Texture And Chemically Inactive To The Action Of Mild Acids. The Nominal Height Of The Shoes, Shall Be 35Mm. With 3 Years Warranty Finish As Per General Condition Of Tender 200 Office Chairs S Type With Armrest ( Nursing Station ) Supply Of Class Room Chair And Hostel Room Study Chair, Cushioned Seat & Plastic Back Without Arms & With Powdercoated Legs With Bushes, Magna Va - Plastic ( Pc ) Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. With 3 Years Warranty Finish As Per General Condition Of Tender 3 Examination Couch Examination Table On Ratchet With No Storage Overall Dimension Of L 1830Mm X W 600Mm X H 850 Mm. The Backrest Has Ratchet Mechanism For Tilting The Backrest. Leg Frames & Intermediate Frames Is Made Of Erw Tubes Having Section Of 30 X 30 Square Tubes With Thickness Of 1.6Mm. Nylon 6 Leg Shoes Is Given To Avoid Wear & Tear. Ms Sheet Metal Lying Surface Of Thickness 1.2Mm Is Used. Top Sheet Metal Panel Base Frame Of 25 X 25 Erw Square Tubes Of Thickness 1.6Mm Is Used. Ratchet Is Of Ms Strip With Section 40 X 4 To Provision The Backrest Tilt. All Ms Part Are Pre Treated And Powder Coated With Ral White Color & All Plastic Parts In Grey. Safe Working Load Is 135Kg Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. 500 Student Chair With Pad Royal Visitor S Type Pad Chair Cushion Seat And Back Cushion Foam And Quality Moulded Ply With Pu Handles With 1 Hr Round Pipe 16 Gauge With Fabric With 18 Mm Pre-Laminated Writing Pad. All Hr Pipes Section Are Shall Be Pre-Treated And Epoxy Powder Coated 50-60 Microns Thickness With 3 Years Warranty Finish As Per General Condition Of Tender
Contract Date: Ref. Documents Contract Value : 1.31 Crore
Government Departments No of Bidders 1
Contract Date: Ref. Documents Contract Value : 5.09 Lakh
Government Departments No of Bidders 1
Contract Date: Ref. Documents Contract Value : 1.85 Lakh
Government Departments No of Bidders 1
Contract Date: Ref. Documents Contract Value : 18,519
Boards / Undertakings / PSU No of Bidders 11
9.
Textiles #11355295 AOC
Tender for Procurement Of Items As Per Annexure-I Of The Niet. , Appointment Badge , Bed Cover Blue Colour With Two Stripes Of White Colour (Single Bed) Size: 90 X 60 , Belt Mufti (Leather) , Belt School (Leather) , Cap Badge Metal , Cap Berret Olive Green , Cap Diamond Jubilee , Formation Badge , Hackles Red , House Pips , Name Tab Plastic (English) , Pillow Cover Blue Colour With Two Stripes Of White Colour Size: 24 X 16 , Towel Bath (Navy Blue Colour) (Min. Size: 27 X 54) , Blazer (Terrywool) Navy Blue With Crest On Left Pocket , Set Consisting Shirt Khaki (Half Sleeves) & Trouser Khaki (S Kumar Tycoon/Mafatlal/ Raymond/Jct/Gwalior/Vimal/Siyaram) 67% Polyester With 33% Cotton Shade , Shirt Sky Blue (S Kumar Tycoon/Mafatlal/ Raymond/Jct/Gwalior/Vimal/Siyaram (F/S) Shade , Shirt White (F/S) - Terrycot (S Kumar Tycoon/ Mafatlal/Raymond/Jct/Gwalior/Vimal/Siyaram) Shade , Trouser Steel Grey (S Kumar Tycoon/Mafatlal /Raymond/Jct/Gwalior/Vimal/Siyaram. 67% Polyester With 33% Cotton Shade , Trouser Black (S Kumar Tycoon/Mafatlal/ Raymond/Jct/Gwalior/Vimal/Siyaram). 67% Polyester With 33% Cotton Shade , Jersey Full (Military Pattern Olive Green) , Jersey Full (Navy Blue) , Short Black (Nylon) With Broad Elastic , Sleeveless White Cotton Tape (Girls)/White Lace Tape Frock For Girls (Inner) , Socks (Navy Blue) Cotton , Socks (White) Cotton , Stockings (Navy Blue) , School Tie , T Shirt Cotton (House Colour) With Collar Of Black Colour Along With Two House Colour Stripes In Collar 180 - 200 Gsm. , Track Suit (240 Gsm 100% Polyster With Inner Brushing) With Embroidered School Diamond Jubilee Logo On Front Left Side And Embroidered Logo Of As Per Requirment On Back Side. , Cloth For Khaki Shirt And Khaki Trouser Of School Uniform Width 56 67% Polyester With 33% Cotton. Llvofoldsof Evenly Spunyarn Reasonably Free From Neps And Other Spinning Defects Shall Be Used For Both Warpandweft The Fabrics Hal Be Uniformly Woven InPlainweave And The Selvedges Shall Be Firm And Straight. Gsm 180. Weave Type Plain.Packaging Type Than. Brand Mafatlal/ Gwalior/ Vimal/ Raymond/ Jct/ Siyaram/ Qmax As Per School Shade Of Khaki. , Cloth For Mufti Trouser Of School Uniform Width 56 Inch Colour - Steel Grey (As Per School Sample ) 67 Percent Polyester With 33 Percent Cotton.Llvofoldsof Evenly Spun Yarn Reasonably Free From Neps And Other Spinning Defects Shall Be Used For Both Warp And Weft. The Fabric Shall Be Uniformly Woven In Plainweave And The Selvedges Shall Be Firm And Straight. Gsm 180. Weave Type Plain. Packaging Type Than. Brand Mafatlal/ Gwalior/ Vimal/ Raymond/ Jct/Siyaram/Qmax. , Cloth For Mufti Shirt Of Schooluniformwidth35to 36 Inch Colour Sky Blue (As Per School Sample) Brand Mafatlal/ Gwalior/ Vimal/ Raymond/ Jct/ Siyaram/Qmax.
Contract Date: Jun 24, 2026 Contract Value : 9,364
Government Departments No of Bidders 3
West Bengal View Result →
Contract Date: Ref. Documents Contract Value : 7.02 Lakh
Government Departments No of Bidders 11
12.
Educational and Research Institute #11345412 Technical Bid
Tender for Purchase Of Lab Equipments For Basic Eng Dept , Purchase Of Lab Equipments For Baisc Eng Dept (Physics And Chemistry) , Digital Balance Itemcode: A001 Weight 500G, Accuracy 0.01G, Top Pan. Tare Function, Caliberation- Automatic External Display Type: Led. , JouleS Calorimeter Itemcode: A005 Specifications: Copper Vessel, Battery Eliminator 3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0 2A), Voltmeter (0-5V), Thermometer (Alcohol), Stop Clock , Ic Regulated Battery Eliminator Itemcode: A011 Specifications: Ic Regulated, Input: 230V Ac; Output: 0-12V Dc In Steps Of 2V; Capacity: 1A Or 2A. , Galvanometer Itemcode: A012 Specifications: Moving Coil Type, 30-0-30 Scale, Unbranded With Bhel Specification-Sensitivity Sensitivity , Voltmeter Itemcode: A013 Specifications: Dc Voltmeter; Range 0-10 V, Analog. , Ammeter Itemcode: A014 Specifications: Dc (0 - 2 Amp) , Decade Resistance Box Itemcode: A016 Specifications: Resistance Box 12 Month Warranty (Dial Type) -Manganin Coil- 2 Dials , Sonometer Apparatus Itemcode: A017 Specifications: Sonometer With Meter Scale Attached Along With Knife Edge, Tuning Forks Set 256, 384, 512 Ranges, Hammer, Slotted Weight - 500 Gm Each To A Total Of 3 Kg. Brass Wire (5 M) , Travelling Microscope Itemcode: A018 Specifications: Branded Travelling Microscope 0 200 Mm Horizontal And 0-150 Mm Vertical Measurement , Potentiometer Itemcode: A019 Specifications: It Features A 1-Meter To 10-Meter Constantan/Manganin Wire Stretched On A Wooden Or Sunmica Baseboard With A Millimeter Scale. It Includes 4Mm Brass Terminals, A Pencil Jockey For Contact, Wire Options (10 Wires), And A Typical Resistance Range Of 10-20 Ohms, Ideal For High-Precision Voltage Measurements. , Rheostat Itemcode: A021 Specifications: High-Grade Ceramic Tube, Oxidized Resistance Wire, 0.5A 5A, Range 10Ω-100Ω. , Deflection Magnetometer Apparatus Itemcode: A022 Specifications: Deflection Magnetometer Apparatus With Compass Box And Two Short Bar Magnets , Digital Electronic Balance /Analytical Balanceitemcode: A001/A007 Specifictions: Load Capacity: Minimum,500 G Readability: 0.01 G,Linearity: 0.02G, Display: Lcd/Led,Tare Function: Required,Top Pan Type Power Supply: 220-240 V,Ac, 50 Hz , Digital Tds Meter Itemcode: A002 Specifictions: Measuring Range: 0-9990,Ppm Resolution: 1 Ppm,Display: Lcd Automatic Temperaturecompensation (Atc): Required Waterproof: Minimum Ip67 Protection Power Source: Battery, Operated (Button Cell/Aaa , Digital Ph Meter Benchtop Model Itemcode: A003 Specifications: Ph Type Microprocessor/Microcontrolle R Ph Range: 0-14 Resolution: 0.01 Ph,Accuracy: ±0.05 Ph Or Better Combined Ph Electrode With Temperature Sensor Two Or Three-Point Calibration Facility Temperature Compensation Type Automatic Display: Lcd Power Supply: 220-240 V Ac, 50 Hz Warranty Minimum 1 Year , Laboratory Heating Mantle (Knitted Glass Yarn) Itemcode: A004 Specifications: Capacity: 500Ml,Temperature Range: Ambient To 350°C Energy Regulator/Control Knob:Required Power Supply: 220-240 V Ac,50 Hz , Mortar With Pestle Itemcode: A006 Specifications: Material: Porcelain Size: 100-150 Mm Inner Diameter Exterior: Glazed Grinding Surface: Unglazed , Hot Plate Itemcode: A008 Specifcations: Top Plate Material: Cast Iron Plate Size: Minimum 8 Inch Diameter Power Rating: 2000 W Temperature Range: Ambient O 200°C Minimum Thermostatic Temperature Control: Required Power Supply: 220-240 V Ac, 50Hz. , Electric Bunsen Burner Itemcode: A009 Specifications: Electrically Operated Energy Regulator/ Control Knob Operating Temperature 800°C Body: Stainless Steel Power Supply Source: Corded Electric, Supplied With A Heavy-Duty, Heat-Resistant,Earth-Grounded, 3-Pin Power Cord (Minimum Length 1.2 Meters). Power Consumption: Between  350 And 500W Power Supply: 220 -240 V Ac, 50 Hz , Water Distillation Unit Itemcode: A010 Specifications: Output Capacity: 4 Litres Per Hour (Lph) Ph Value: 5.5 To 7.0 Conductivity (Raw Water Distillation):3.0 - 4.0 Μs/Cm Or Less Glassware Material: Borosilicate 3.3 Glass (Pyrex/Duran Equivalent) Heating Elements: Silica Enclosed Quartz Heaters Or Chromium-Plated Element Variants Power Supply: 220-240 V Ac,50 Hz / 60 Hz, Single Phase Automatic Water Level Cut-Off
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
19.
Public Administrative Department #11333610 Technical Bid
Tender for Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1:5 M In Width Or 10 Sqm Or Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soils. .(Dsr No. 2.8) , All Kinds Of Soil. Dsr No. 2.8.1) , Providing And Laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes Conforming To Is : 8329 : (Dsr No. 18.72) , 100 Mm Dia Ductile Iron Class K-7 Pipes (Dsr No. 18.72.1) , 150 Mm Dia Ductile Iron Class K-7 Pipes (Dsr No. 18.72.2) , Providing Push-On-Joints To Centrifugally (Spun) Cast Iron Pipes Or Ductile Iron Pipes Including Testing Of Joints And The Cost Of Rubber Gasket : (Dsr No. 18.70) , 100 Mm Dia Pipes (Dsr No. 18.70.1) , 150 Mm Dia Pipes (Dsr No. 18.70.2) , Labour For Cutting C.I. Pipe With Steel Saw (Dsr No. 18.83) , 100 Mm Diameter C.I. Pipe (Dsr No. 18.83.1) , 150 Mm Diameter C.I. Pipe (Dsr No. 18.83.2) , Providing And Fixing Of Ci/Di Specials Isi Marked Including Cost Of Nut Bolt, Rubber Gasket, Pig Lead, Hemp Yarn, Solvent Solution Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Of Di Sluice Valve (With Resilient Seated) Including Cost Of Bolts, Nuts, Rubber Insertions Etc., Loading And Unloading Complete In All Respects To The Entire Satisfaction Of Eic. Make: Avk/ Ivc/ Kirloskar/ Sigmaflow/ Talis (Nsi) , 100 Mm Diameter (Nsi) , 150 Mm Diameter (Nsi) , Construction Of Brick Masonary Chamber For Sluice Valve Including Excavation, 1St Class Brick Work In Cement Sand Mortar 1:4 Alongwith Inside And Top Surface Plaster, Plain Cement Concrete For Floor Etc. Complete In All Respects Of Size: 3X3x4 To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Reinforced Cement Concrete Cover 1:2:4 Of 3 Thickness Including Cost Of Steel Winding Wire Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layer Not Exceeding 20 Cm. In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Upto 50 And For All Lift. (Dsr No. 2.25) , Carriage Of Material By Mechanical Transport Including Loading, Unloading And Stacking Earth Up To 3 Km (Dsr No. 1.1.2) , Supplying And Filling Sand (Recycled Sand From C&D Plant) Under Road Crossing Including Carriage Etc., Complete In All Respects To The Entire Satisfaction Of The Eic. (Nsi Based Dsr No. 2.27) , Labour For Disconnection Of Gi Pipe & Gi Specials Including Cost Of Excavation, Extra For Concrete Cut, Cutting Of Gi Pipe, Plugging Of Gi 1 Pipe With Gi Plug, Gi Socket, Labour, Plumber Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Making Connection Of Newly Laid Cpvc Pipe With Existing Gi Pipe Including Cost Of Threading Gi Pipe Including Cost Of Threading Of Existing Pipe With The Help Of Labour And Plumber Etc. Complete In All Respects To The Entire Satisfaction Of Eic.(Nsi) , Providing And Fixing Of Polyethelene - Aluminium -Polyethelene Pe-Al Pe 2025X ½ Female Thread Adopter (Fta) Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Of Gm Ferrule (½ I/D) Heavy Duty Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Polyethelene-Aluminium- Polyethelene Pe-Al-Pe Composite Pressure Pipes Conforming To Is - 15450, U.V. Stabilized With Carbon Black Having Thermal Stability For Hot & Cold Water Supply, Capable To Withstand Temperature Up To 80°C, Including All Special Fittings Of Composite Material (Engineering Plastic Blend And Brass Inserts Wherever Required) E.G. Elbows, Tees, Reducers, Couplers & Connectors Etc., With Trenching, Refilling And Testing Of Joints Complete As Per Direction Of The Engineer In Charge. (Dsr No. 18.3) , External Work: 1620 (20 Mm Od ) Pipe (Dsr No. 18.3.2) , Extra Cutting Through Metalled Road And Their Foundation Including Sorting Screening And Stacking At The Site Complete In All Respects. (Nsi) , Labour For Making Arrangement For Connection With Existing Line Including Cost Of Cutting, Excavation, Jointing, Alignment, Dewatering, Placing Caution Boards Etc, Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , 6 I/D To 4 I/D (Nsi) , 6 I/D To Proposed 6 I/D (Nsi) , Making Scour Arrangement Including Cost Of C.I. Tee 4X 4X 4(A/F)-Ino, C.I. Collar 4 I/D -1No., D.I Sluice Valve =1No. (Vag/Avk/Ivc), C.I. Tail Piece 4 I/D (S/F-Ino. Pig Lead, Hemp Yarn, Rubber Sheet, Nut Bolt, Excavation, Dewatering Cutting Of Existing Pipe, Jointing, Testing Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Of 4 I/D (100 Mm) Air Valve 100Mm D.I. Air Valve With Body And Disc Of Ductile Iron And Plug Made Out Of Brass Including Cost Of 1 No.= 4 D.I Sluice Valve 4, With 2 Nos. = 4 D.I Tail Piece, 4 × 4 × 4 = Tee, & 2M Pipe Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Repair Of Damaged Sewer Connection Including Cost Of Cutting, Jointing And Haunching Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Repair And Rectification Of Underground Water Supply Connection Due To Damage During The Laying Of New Di Water Supply Pipeline Including Cost Of Pig Lead, Hemp Yarn, Rubber Sheet, Nut Bolt, Specials Pipe Of Same Size Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
20.
Educational and Research Institute #11322376 AOC
Bids Are invited for Indigo Neel - Natural Dye Material , Dhawadi Flower - Natural Dye Material , Palash Flower - Natural Dye Material , Chawal Kodi - Natural Dye Material , Anar Peels - Natural Dye Material , Myrobalan Flower Harda Phool - Natural Dye Material , Madder Manjistha - Natural Dye Material , Tea Chai - Natural Dye Material , Catechu Kattha - Natural Dye Material , Turmeric - Natural Dye Material , Onion Peel - Natural Dye Material , Alizerine - Natural Dye Material , Areca Nut - Natural Dye Material , Heena - Natural Dye Material , Annato Seeds - Natural Dye Material , Sappan Wood - Natural Dye Material , Ratanjoth - Natural Dye Material , Alum - Chemicals For Dyeing , Potassium Di Chromate - Chemicals For Dyeing , Copper Sulphate - Chemicals For Dyeing , Stannous Sulphate - Chemicals For Dyeing , Soap Nut - Chemicals For Dyeing , Common Salt - Chemicals For Dyeing , Turkey Red Oil - Chemicals For Dyeing , Napthol Asbs - Napthol Dye , Napthol Asbo - Napthol Dye , Napthol Astr - Napthol Dye , Colour Fixing Dye - Direct Dye , Pink Poplon - Dye Pink Poplon Acid , Acetic Acid Gnfc - Acid Dye , Vat Golden Yellow Kailash - Vat Dye , Vat Blue 3R - Vat Dye , Vat Olive Green B - Vat Dye , Vat Brown R - Vat Dye , Vat Black A C - Vat Dye , Vat Pink R - Vat Dye , Sulphur Black 04 - Sulphur Dye , Sodium Chips - Sulphur Dye , Hydrose Sodium Sulphate - Chemicals Other , Reactive Orange M2r Sp - Reactive Dye , Reactive Red F3bsp - Reactive Dye , Reactive Black B Sp - Reactive Dye , Reactive Magenta Mb Sp - Reactive Dye , Reactive Golden Yellow Rtf Sp - Reactive Dye , Reactive Pink Sp - Reactive Dye , Acetic Acid Vinegar - Vinegar , Hcl Acid - Hydro , Soda Ash - Soda Ash Material , Caustic Soda - Caustic , Sodium Nitrite - Sodium Ntrate Chemical , Fixing Oil - Oil Fxing , Bleaching Powder - Bleaching , Hydrogen Peroxide - Peroxide , Sodium Silicate - Silicate , Hydrose Or Sodium Sulphate - Hydrose , Catasoft M - Yarn Softner , Wetting Oil Liquid - Wetting Liquid , Sodiu
Contract Date: Ref. Documents Contract Value : 4.25 Lakh
Boards / Undertakings / PSU No of Bidders 3
Andhra Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 2.24 Lakh
Boards / Undertakings / PSU No of Bidders 14
Maharashtra View Result →
25.
Public Administrative Department #11313366 Technical Bid
Tender for Supply Of Different Materials Of Mgnregs Work At Different Places Under Krishnagar- Ii Panchayat Samity Including All Gps Under Krishnagar- Ii Development Block In The District Nadia For The F/Y 2026-27 , Material Supply Works Of Mgnrega Under Krishnagar-Ii Development Block , 1 St Picked Class Brick , 1 St Class Brick , 1St Class Brick Bats ( Size As Direction Of Eic). , Silver Sand , Fine Sand , Medium Sand , Course Sand , Portland Cement , Brick Aggregrates (Single Size) 40 Mm Normal Size. , Stone Aggregrates (Single Size) 40 Mm Normal Size.(Without Carriage) , Stone Aggregrates (Single Size) 20 Mm Normal Size.(Without Carriage) , Stone Aggregrates (Single Size) 10 Mm Normal Size.(Without Carriage) , Stone Aggregrates (Single Size) 5.6 Mm Normal Size.(Without Carriage) , Stone Aggregrates 13.2 Mm Nominal Size. (Without Carriage) , Stone Aggregrates 11.2 Mm Nominal Size. (Without Carriage) , 22.4 Mm Machine Made Chips (Without Carriage). , Jhama Metal Kiln Burnt. ( Size As Direction Of Eic). , Thermocol 12.5 Mm Thick. , Polythene Sheet (150 Gm Per Sqm) , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller- 8 To 10 Tonne , Hire Charge Of Shuttering Plank(Without Prop )(25Mm-30 Mm) , Hire Charge Of Shuttering Plank(With Prop )(25Mm-30 Mm) , Hire Charge Of Shuttering Plank( With Prop (30Mm 37 Mm ) , Vibrator (Needle Type 40 Mm) , Steel Material- Tor Steel Rods/Hysd Bars/Tmt Bars(Sail/Tata/Rinl) (Fe415/Fe500/Fe500d,Conforms To Is 1786) , Steel Material- Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Ssl/Bmasl/Electro Steel)(Fe415/Fe500/Fe500d,Conforms To Is 1786) , Ms Ornamental Grill (Above 10 Kg/Sq.M Up To 16 Kg/Sq.M , 1220. Wire Mesh (Rabbit) , 3050. Galvanised Steel Corrugated Sheets , 1023. Galvanised Steel J Or L Hooks 8 Mm Dia , Galvanised Steel Bolt & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , G.I Lime Washere , Bitumen Washer , Stainless Steel Bolts/ Square Bar And Plates , Unslaked Lime , Supply Of First Aid Box Including Medicines (Specified By Pia) At Site. , Model Citizen Information Board For Ibs( Specification-Made Of Reinforced Cement Concrete With A Height Of 3Ft, Width 2Ft And Thickness Of 4 Inch & 30 Degree In Head With Pentagonal Shape Including Fixing The Mgnrega And Biswa Bangla Logo In Upper Side Of The Board And Supply In The Mgnrega Worksite Anywhere. , Model Citizen Information Board For Community (Specification- Made Of Reinforced Cement Concrete With A Height Of 4Ft, Width 3Ft And Thicknes Sof 4 Inch & 30 Degree In Head With Pentagonal Shape Including Fixing The Mgnrega And Biswa Bangla Logo In Upper Side Of The Board And Supply In The Mgnrega Worksite Anywhere. , G.I. Wire , Coconut Rope , Sal Ballah (10 Cm ) , Sal Ballah ( 125 Mm ) , Sal Ballah (15 Cm ) , Cement Primer(Interior) , Cement Primer(Exterior) , Primer( For Wood) , Cement Based Dust Putty , Black Japan Paint , Enamel Paint For Steel Grill , Synthetic Enemel Paint In Black Or Chocolate Shade. , Woodwork For Door And Window Frame Malayashia Sal , Panel Shutters Of Door And Window, As Per Design (Each Panel Consisting Of Single Plank Without Joint), Including Fitting And Fixing The Same In Position Butexcluding The Cost Of Hinge And Other Fittings.(Ii) 40Mm Thick Shutters With 19Mm Thick Panel Of Size 30 To 45 Cm.(B) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. , Supplying, Fitting & Fixing Factory Made P.V.C. Door Frame Of Size 50 Mmx47 Mm With A Wall Thickness Of 5 Mm, Made Out Of Extruded 5 Mm, Pvc Sheet Miter , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Vitreous China Pedestal For Wash Basin , Vitreous China Foot Rests 250X125x25 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Towel Rail (600 Mm) , Ptmt - Soap Dish/Holder 138X102x75 Mm , Fan Hook , Reinforced Cement Concrete Ventilator , Vitrified Floor Tile 60X60 Cm , Turpentine Oil , Vitreous China Flat Back Wash Basin 450X300 Mm , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Supplying, Fitting & Fixing 30 Mm Thick Both Side Prelaminated Factory Made Solid Panel Pvc Door Shutter Consisting Of Outer Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size 19 Mmx19 Mm For Styles, Top And Bottom Rails, M.S. Frame Shall Have Cost Of Steel Primers Of Approved Make , Supplying, Fitting And Fixing M.S. Clamps For Door And Window Frame Made Of Flat Bent Bar, End Bifurcated With Necessary Screws Etc. By Cement Concrete(1:2:4) As Per Direction. (Cost Of Concrete Will Be Paid Separately) (A) 40Mm X 6Mm, 250Mm Length , Anodised Aluminium Butt Hinges Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification (I.S. 205/66) And Fitted And Fixed With Cadmium Plated Screws: (Vii) 100 X 75 X 4.0Mm , Anodised Aluminium Barrel / Tower / Socket Bolt (Full Covered) Of Approved Manufactured From Extruded Section Conforming To I.S. 204/74 Fitted And Fixed With Cadmium Plated Screws: (Vi) 200Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification (I.S. 230/72) Fitted And Fixed Complete: (A) With Continuous Plate Base (Hexagonal/ Round Rod) (Iii) 100 Mm Grip X 12 Mm Dia Rod. , (C) Supplying 6 Levers Godrej Crystal Satine Mortice Lock With Keys Including Fitting & Fixing Complete. , I) Iron Hasp Bolt Of Approved Quality Fitted And Fixed Complete (Oxidised) With 16Mm Dia Rod With Centre Bolt And Round Fitting. (A) 200Mm Long , Door Stopper.(Brass) , Red Lead Primer For Steel Grill , Interior Premium Imulsion(Plastic Paint) , Exterior Imulsion Weather Coat Paint , Distemper Paint , Supply Of Upvc Pipes (B Type) (For Soil Pipe Purpose) & Fittings Conforming To Is-13592-1992 (A) (I) Single Socketed 3 Meter Length (C) 160 Mm , (Ii) Plain Tee For Soil Pipe Purpose. (C) 160 Mm , V) Plain Y For Soil Pipe Purpose. (C) 160 Mm , Supplying, Fitting & Fixing Upvc Down Pipes A- Type And Fittings Conforming Tois:13592-1992 With All Necessary Clamps Nails, Including Making Holes Inwalls, Floor Etc. Cutting Trenches In Any Soil Through Masonry Concrete Structures Etc If Necessary And Mending Good Damages Including Joining Withjointing Materails (Spun Yarn, Valamoid/Bitumen/M-Seal Etc) Complete. A) Upvc Pipes: (Ii) 110 Mm. Dia. , B) Upvc Fittings: A) Plain Tee (Ii) 110 Mm. Dia. , D) Shoe (Ii) 110 Mm. Dia , Qgs Seed(10 Variety) , G.I. Hollow Pipe Squre Or Round Section For Roof Truss 50 Mm Dia Or 2 Inch Shape , G.I. Hollow Tubewell Pipe Round Section (Old) For Roof Truss 75 Mm Dia , Precast Terrazzo Tiles 22 Mm Thick ( Light Shade) , Precast Terrazzo Tiles 22 Mm Thick ( Medium Shade) , Precast Terrazzo Tiles 22 Mm Thick ( Dark Shade) , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using , Precast Chequered Cement Tiles 22 Mm Thick Medium Shade , Upvcbend 87.50, 110 Mm Bend , Upvc Pipe Clip 110 Mm Bend , Check Valve 32Mm , Check Valve 40Mm , Readymade Bamboo Fencing Ht.Of 5Ft. , Supply Of G. I. Pipes Of Tata Make Including Necessary Sockets - 15 Mm Dia.(Medium Quality) , Supply Of G. I. Pipes Of Tata Make Including Necessary Sockets - 25 Mm Dia.(Medium Quality) , Chlorinated Polyvinyl-Chloride(Cpvc) Pipe 25Mm Outer Dia. , Chlorinated Polyvinyl-Chloride(Cpvc) Pipe 15Mm Outer Dia. , Empty Gunny Bag , Vermi Compost , Farm Yard Manure/Cowdung (@ Max 20% Moisture Content) , Lime Dust , Limestone Powder , Gypsum , Rice Husk/ Sugar Baggase (As Per Availability In Local Market) , Coco Peat (Loose) Not More Then 10% Moisture Content , Coco Peat (Block @ 2 Kg.) , Jeevamrit, In Concentrated For Miyawaki , Neem Based Vermi Compost , Neem Khol Or Other Oil Seed Cake , Bone Dust , Neem Oil 10000 Ppm , 2:1:1 Npk Based Organic Manure , 5:1:1 Npk Based Organic Manure , Poly Tube (4 X 6 ) , Poly Tube (6 X 8 ) , Poly Tube (8 X 12 ) , Bio Pesticides , Bio Fungicides , Growth Regulating Chemicals Naa, Iba , Dormancy Breaking Chemicals Ga, Ethril , Copper Oxychloride 50% , Imida-Chlorpide 17.8% Sl , Carbofuran-3G , Chloropyriphos 50% Ec , Zinc Phosphide , Carbendazim 50 Wp Fungicides I.E Bavistin , Spraying Machine (Hire) Per Day , Hand Held Sprayer 1 Lit. Capacity , Secateurs , Garden Hoe , Garden Rake , Fogger 4 Way , Pan Wheel Barrow , Grafting Knife , Poly Sheet For Grafting , Board For Plant Variety Name , Paddy Straw , Agro Shade Net , Uv Poly Film 200 Micron , Insect Proof Net , Nylon Net , Uv Wire , Buckets , Jharii / Rose Can , Polly Bottle 2 Lit , Earthen Pot Of 5 Lit Capacity , Water Can (5 Lit.) , Hire Charge Of Water Carriers For Rsp Only(Per Day Of 1000 Lt) , Electric Wire, Switch Board , Pump 0.5 Bhp (Electric Run) , Locking Spring (Zig Zag) , Lateral Pipe 16 Mm , Screen Filter , Modular Sprinkler , Shower , Drums Big Size , Nagar Patta (Only For Miyawaki) , Good Quality Fine Sand Supply , Readymade Bamboo Fencing Material Of A Hight Of Five Ft. Stone Graded Aggregates 20Mm Nominal Size
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 5
West Bengal View Result →
26.
Public Administrative Department #11312997 Technical Bid
supplying water supply materials for annual maintenance in sethiyathope town panchayat from 01-07-2026 to 30-06-2027 , full pump india mark ii deep well hand pump with 30 meters (10 nos. * 3 mtr) connecting rods with telescopic stand and cylinder assembly. , india mark ii extra deep well hand pump with 60 meters (20 nos. * 3 mtr) connecting rods with telescopic stand and cylinder assembly. , india mark iii (vlom) hand pump with 30 meters (10 nos. * 3 mtr) connecting rods with telescopic stand and cylinder assembly. , hand pump spares , hexagonal bolt m 12 * 40mm longs. , flange bolt unit (1 no. m 12 * 40mm bolts plus 2 nos. of m 12 nuts. , 3 hexagonal nut m 12 , third plate (additional flange) , front cover , hexagonal bolt m 12 * 20 mm long. , head weldment (without cover and third plate) , head with cover and third plate (including for extra deep well hand pump) , handle bar weldment (without above accessories) for mark ii and v.l.o.m. , handle bar weldment for extra deep well hand pump , handle axle (s.s.) , ball bearing 6204 z , spacer (handle) , special washer m 12*4 mm thick galvanized , chain with coupling , high tensile hexagonal bolt m 10 * 40 mm , chain bolt unit ( m 10 * 40 mm long bolt with m 10 : nylon net) , hexagonal nylon nut m 10 , handle bar assemble complete with bearing chain coupling, handle axle , high tensile bolt, nylon nut & spacer for mark ii and vlom pumps. , handle bar assembly complete for extra deep well hand pumps , head assembly with handle assemble (complete with cover, chain coupling and third plate) , raiser pipe (b-class – 32 mm nb – galvanized pipe) fitted with heavy coupler at one end , pipe socket (32 mm nb _ galvanized heavy coupler) , water tank ( galvanized) for mark ii and extra deep well hand pump) , water tank for vlom hand pump , stand (telescopic) (gal) for mark ii and v.l.o.m pumps , stand (telescopic) for extra deep well hand pump , connecting rod m.s. (12 mm dia * 3 mtr long) , hexagonal coupler ( m 12 * 50 mm long) electro galvanized , cylinder assemble (complete is with plunger rod) for mark ii and hand pumps. , cylinder assembly for extra deep well hand pump , cylinder assembly for v.l.o.m hand pump , cylinder body fitted brass liner and reducer cap , reducer cap , upper valve assembly complete set consisting of plunger rod, plunger yoke body, rubber seating (small) upper valve guide, spacer, follower & pump buckets. , lower valve assembly complete set consisting of check valve guide , check valve guide, retainer and rubber seating (big) , follower , plunger yoke body , check valve guide , check valve seat , rubber seat retainer , pump bucket ( veg. tanned leather) , sealing ring ( chrome tanned leather) , rubber seating (small) for upper valve , rubber seating (big) , plunger rod (450mm long) , modified spacer , pump bucket (nit rile rubber only to be used with modified spacer). , upper valve guide fitted with rubber seating (small) , sealing ring nit rile rubber , sealing ring washer , pvc pipes ¾” 25 mm pvc pipe 15 ksc , 1 ¼” 40 mm pvc pipe 6 ksc , 1 ½” 50 mm pvc pipe 6 ksc , 2” 63 mm pvc pipe 4 ksc , 2” 63 mm pvc pipe 6 ksc , 2 ½” 75 mm pvc pipe 4 ksc , 2 ½” 75 mm pvc pipe 6 ksc , 3” 90 mm pvc pipe 4 ksc , 3” 90 mm pvc pipe 6 ksc , 4” 110 mm pvc pipe 4 ksc , 4” 110 mm pvc pipe 6 ksc , 5” 140 mm pvc pipe 4 ksc , 5” 140 mm pvc pipe 6 ksc , 6” 160 mm pvc pipe 4 ksc , 6” 160 mm pvc pipe 6 ksc , 6” 160 mm pvc pipe 10 ksc , 7” 180 mm pvc pipe 6 ksc , 8” 200 mm pvc pipe 6 ksc , solvent cement 1 litre , ½ litre , 100 ml , saddle set 50 * 20 , 63 * 20 , 75 * 20 , 90 * 20 , 110 * 20 , 140 * 20 , 160 * 20 , pvc reducer coupler 63 * 50 , 75 * 63 , 90 * 63 , 90 * 75 , 110 * 63 , 110 * 75 , 110 * 90 , 140 * 63 , 140 * 90 , 140 * 110 , 160 * 110 , 160 * 140 , pvc reducer multi stage 90 * 63 , 110 * 63 , 110 * 75 , 110 * 90 , 140 * 90 , pvc reducer fabricated 75 * 63 , 90 * 75 , 110 * 90 , 140 * 110 , 160 * 140 , pvc coupler 25 mm , 32 mm , 40 mm , 50 mm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , 180 mm , 200 mm , pvc long coupler 50 mm , 63 mm , 75 mm , 90 mm , 110 mm , pvc bend 25 mm , 32 mm , 40 mm , 50 mm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , 180 mm , 200 mm , pvc tee 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , 180 mm , 200 mm , pvc end cap 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , 180 mm , 200 mm , pvc elbow 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , 180 mm , 200 mm , pvc m.t.a 25 mm , 32 mm , 40 mm , 50 mm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , 180 mm , 200 mm , pvc f.t.a 25mm , 32 mm , 40 mm , 50 mm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , 180 mm , 200 mm , th. elbow 25 * 20 , 32 * 25 , r.elbow 25 * 20 , 32 * 25 , r.brush 25 * 20 , 32 * 25 , 40 * 32 , 50 * 40 , half bend 63 mm , 75 mm , 90 mm , 110 mm , s – bend 63 mm , 75 mm , 90 mm , 110 mm , g.i. specials – elbow 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , g.i. bend 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , g.i. tee 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , g.m. gate valve 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , g.i. coupler 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , g.i. union 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , g.i. hex – nipple 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , air valve 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , flange washer 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , flange with bolt& nut 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , non return valve 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , heavy bore well coupler 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , repair coupler 50 mm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , 180 mm , 200 mm , cid joint 80 mm , 100 mm , 125 mm , 150 mm , 200 mm , 250 mm , 300 mm , sulice valve 50 mm , 80 mm , 100 mm , 125 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , a.c. pipe 80 mm , 100 mm , 125 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , 400 mm , 450 mm , a.c coupler 80 mm , 100 mm , 125 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , 400 mm , 450 mm , pa.nipple 15 * 300 , 20 * 300 , 25 * 300 , 32 * 300 , 40 * 300 , 50 * 300 , 65 * 300 , 80 * 300 , 100*300 , gi - reducing tee 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , gi - reducing elbow 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , gi – reducing socket 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , gi - reducing bush 20 * 15 , 25 * 20 , 32 * 25 , 40 * 32 , 50 * 40 , 65 * 50 , 80 * 65 , hdpe hose black 1” , hose green 1” , hose collar 1” , dummy cap 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , ci tap 15 mm , 20 mm , 25 mm , gi pipes 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , red rock block 5 kg , shellac 50 ml , 1” blade , m – seal , cascade sheet , tafflon tape , 500 lit hdpe water tank , 1000 lit hdpe water tank , 2000 lit hdpe water tank , 3000 lit hdpe water tank , 5000 lit hdpe water tank , 500 lit hdpe water tank lid , 1000 lit hdpe water tank lid , 2000 lit hdpe water tank lid , 3000 lit hdpe water tank lid , 5000 lit hdpe water tank lid , ductile iron socket pipe 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , 400 mm , 450 mm , ductile iron flanged pipe , 4 m length of pipes 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , 400 mm , 450 mm , 5 m length of pipes 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , 400 mm , 450 mm , ductile iron specials , all socket 100mm - 200mm dia , 250mm - 300 mm dia , 350mm - 450 mm dia , all flange 100mm - 200mm dia , 250mm-300mm dia , 350mm - 450 mm dia , ½” ferrule , ¾” ferrule , ½” main cark , ¾” main cark , submercible motor jet clamp , 8” bore dummy , 1 32 mm pvc pipe 15 ksc , 1 1 kvar power capacitor , 20 lpm x 125 mtr isi marked submersible pump set (1.5 hp – i phase) , 20 lpm x 150 mtr isi marked submersible pump set ( 2 hp – i phase ) , 50 lpm x 175 mtr isi marked submersible pump set ( 5 hp – iii phase) , 75 lpm x 200 mtr isi marked submersible pump set ( 7.5 hp –iii phase ) , 75 lpm x 225 mtr isi marked submersible pump set (7.5 hp – iii phase) , 75 lpm x 275 m head 10 hp isi marked submersible pump set , ms kiosk box of size 0.75 m x 0.45 m x 0.75 m a. 1 hp , b. 1.5 hp , c. 2 hp , 3 phase panel board – d.o.l with 2 level guard & auto start a. 1 hp , b. 1.5 hp , c. 2 hp , d. 3 hp , e. 4 hp , f. 5 hp , g. 6 hp , 3 phase panel board star – delta with 2 level guard & auto start a. 6hp , b. 7.5 hp , c. 10 hp , d. 12.5 hp , e. 15 hp , f. 20 hp , g. 25 hp , 1.5 sq. mm flat cable , 2.5 sq. mm flat cable , 4.0 sq. mm flat cable , 6.0 sq. mm flat cable , 10.0 sq. mm flat cable , 16.0 sq. mm flat cable , 25.0 sq. mm flat cable , yarn bundle , grease , 2” upvc pipe , 11/2” upvc pipe , 11/4” upvc pipe , 2” upvc adapter , 11/4” upvc adapter
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
27.
Public Administrative Department #11310521 Technical Bid
Tender For Purchages Bunai Material Bunai Material- 1 Picking Wall Fiber (As Per Sample) (Reputable Brand / Premium Quality) 2 Pickers (As Per Sample) (Reputable Brand / Premium Quality) 3 Ratchet Catch (Leaf Set) No. 27 (Reputable Brand / Premium Quality) 4 Pressing Cam Lever L/R-101 (Reputable Brand / Premium Quality) 5 Wooden Steel No. 29 (Cr-12W) (Reputable Brand / Premium Quality) 6 Wheel Gear 14T - No. 62 (Reputable Brand / Premium Quality) 7 Bevel Gear (23T - No. 63) (Reputable Brand / Premium Quality) 8 Worm Wheel Stud (No. 51) (Reputable Brand / Premium Quality) 9 Ratchet Pawl Lever (No. 22) (Reputable Brand / Premium Quality) 10 Buffer Holding Bracket (No. 48) (Reputable Brand / Premium Quality) 11 Buffer Band (Leather Type) (No. 62) (Reputable Brand / Premium Quality) 12 Stick Cap (No. 20) (Reputable Brand / Premium Quality) 13 Bearing (6208 / 6202) (Reputable Brand / Premium Quality) (25 + 25 Nos.) 14 Ratchet Wheel (24T - No. 26) (Reputable Brand / Premium Quality) 15 Ratchet Lever (L/R 2Ci - No. 88) (Reputable Brand / Premium Quality) 16 Worm (L/R 1Ci - No. 49) (Reputable Brand / Premium Quality) Quality) 17 Parachute Rope (As Per Sample) (Reputable Brand / Premium Quality) 18 Fine Belt (A-83/100 B) (Reputable Brand / Premium Quality) 19 Picking Stick (As Per Sample) (Reputable Brand / Premium Quality) 20 Tariff Wheel (As Per Sample) (Reputable Brand / Premium Quality) 21 Handloom Pickers (As Per Sample) (Reputable Brand / Premium Quality) 22 Handloom Shuttle (12 Inches Long) (Reputable Brand / Premium Quality) 23 Grease (Ap-3) (02 Kg Container) (Reputable Brand / Premium Quality) 24 Mobil Oil No. 40 (20-Liter Packing) (Reputable Brand / Premium Quality) 25 Dye (Fabric Dye) – Fast Color (50-Gram Packing) (Reputable Brand / Premium Quality) 26 Powerloom Steel Reed (No. 36, 40; 72 Inches X 5 Inches) (Reputable Brand / Premium Quality) 27 Yarn 2/20S (On Cones) (Reputable Brand / Premium Quality) 28 Yarn 10S (On Cones) (Reputable Brand / Premium Quality) 29 Yarn 3/6S (In Hanks) (Reputable Brand / Premium Quality) 30 Yarn (2)S (On Cones) (Reputable Brand / Premium Quality) 31 Yarn 2/40S (On Cones) (Colored / White) (Reputable Brand / Premium ...Quality) 32 Yarn 6S On Cones (All Colors) (Reputable Brand / Premium Quality) 33 Colored Wool Yarn (Reputable Brand / Premium Quality) 34 Yarn 2/60S On Cones (Colored / White) (Reputable Brand / Premium Quality) – All Colors 35 Jute Fabric (Reputable Brand / Premium Quality) 36 Powerloom Shuttle (Reputable Brand / Premium Quality) 37 Binding Wire 12 X 14 (1000 Pieces Per Bundle) (Reputable Brand / Premium Quality) 38 Yarn (6S) On Cones (Reputable Brand / Premium Quality) 39 Black Wool Yarn (4 Count) (Reputable Brand / Premium Quality) 40 Handloom Reed / Comb 72 X 5.5 (Size No. 12) (Reputable Brand / Premium Quality) 41 Warping Machine Brake Belt – Leather (2 Inches Wide) (Reputable Brand / Premium Quality) 42 Dari Panja (Wooden) – 12 Inches (Reputable Brand / Premium Quality) 43 Emery Strip (2 Inches) (Reputable Brand / Premium Quality) 44 Heddle Frame Hook Set (Reputable Brand / Premium Quality) 45 Pick Bobbin Rod (For Bobbin Winding) – Handloom (2 Feet Long) (Reputable Brand / Premium Quality) 46 Cast Iron Welding Rods (Reputable Brand / Premium Quality) 47 Temple Rod / Cover (Reputable Brand / Premium... Quality) 48 Joint Filler (Reputable Company / Premium Quality) Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Madhya Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 11.75 Lakh
Government Departments No of Bidders 1
29.
Health and Family Welfare #11308293 Technical Bid
Tender for Purchase Of Cotton, Gauze And Bandages , Item Wise Boq Boq_Ver4.0 Item Wise Normal Inr Only Inr Select, Excess (+), Less (-) Tender Inviting Authority: Office Of The Chief Medical And Health Officer, Deeg Name Of Work: Purchase Of Cotton, Gauze And Bandages Contract No: Name Of The Bidder/ Bidding Firm / Company : Price Schedule (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Name Of Items Specifications Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder In (Per Than/Dozen/Roll) (Including All Taxes) Rs. P Gst (If Applicable In Percentage) Gst Amount In Rs. P Hsn / Sac Code Total Amount Excluding Taxes In Rs. P Total Amount Including Taxes Rs. P Total Amount In Words , Gauge Un Medicated Specification:- Count Of Yarn Warp Weft Reed Pick 24S 24 20 (80/Dm 14(56Dm) , Gauge Un Medicated Specification:- Count Of Yarn Warp Weft Reed Pick 24S 24 20 (80/Dm 14(56Dm) , Ordinary Bandage:- Count Of Yarn Warp Weft Reed Pick 24S 24 38(152/Dm 22(88Dm) , Ordinary Bandage:- Count Of Yarn Warp Weft Reed Pick 24S 24 38(152/Dm 22(88Dm) , Ordinary Bandage:- Count Of Yarn Warp Weft Reed Pick 24S 24 38(152/Dm 22(88Dm) , Ordinary Bandage:- Count Of Yarn Warp Weft Reed Pick 24S 24 38(152/Dm 22(88Dm) , Ordinary Bandage:- Count Of Yarn Warp Weft Reed Pick 24S 24 38(152/Dm 22(88Dm) , Ordinary Bandage:- Count Of Yarn Warp Weft Reed Pick 24S 24 38(152/Dm 22(88Dm) , Absorbent Cotton Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select % 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
30.
Educational and Research Institute #11308089 Technical Bid
Tender For Purchase Of Equipments (Non-Consumables) For Chemistry Lab In Basic Engineering (First Year) Department = Limited- 2 Digital Electronic Balance /Analytical Balance • Load Capacity: Minimum• 500 G Readability: 0.01 G• Linearity: 0.02G• Display: Lcd/Led• Tare Function: Required• Top Pan Type• Power Supply: 220–240 V• Ac, 50 Hz 3 Digital Tds Meter• Measuring Range: 0–9990• Ppm Resolution: 1 Ppm• Display: Lcd• Automatic Temperature• Compensation (Atc): Required Waterproof: Minimum Ip67• Protectionpower Source: Battery• Operated (Button Cell/Aaa Battery) 4 Digital Ph Meter Benchtop Model• Ph Type• Microprocessor/Microcontrolle R Ph Range: 0–14• Resolution: 0.01 Ph• Accuracy: ±0.05 Ph Or Better• Combined Ph Electrode With• Temperature Sensor Two Or Three-Point Calibration• Facility Temperature Compensation• Type Automatic Display: Lcd• Power Supply: 220–240 V Ac,• 50 Hz Warranty Minimum 1 Year• 5 Laboratory Heating Mantle (Knitted Glass Yarn)• Capacity: 500Ml• Temperature Range: Ambient• To 350°C Energy Regulator/Control Knob:• Required * Power Supply: 220-240 V Ac,• 50 Hz 6 Mortar With Pestle• Material: Porcelain• Size: 100–150 Mm Inner• Diameter Exterior: Glazed• Grinding Surface: Unglazed• 7 Hotplate• Top Plate Material: Cast Iron Plate Size: Minimum 8 Inch• Diameter Power Rating: 2000 W• Temperature Range: Ambient• To 200°C Minimum Thermostatic Temperature• Control: Required Power Supply: 220–240 V Ac,• 50 Hz 8 Electric Bunsen Burner• Electrically Operated• Energy Regulator/ Control Knob• Operating Temperature 800°C• Body: Stainless Steel• Power Supply Source: Corded• Electric, Supplied With A Heavy-Duty, Heat-Resistant, Earth-Grounded, 3-Pin Power Cord (Minimum Length 1.2 Meters). Power Consumption: Between• 350 And 500W Power Supply: 220-240 V Ac,• 50 Hz
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
31.
Public Administrative Department #11306281 AOC
Tender For Various development Works At Swami Ramdev Maharaj Sports Complex.-ITEM NO: 1 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (SSR Item No: 46.19) (PMC Bhavan) Unique No (16026) Rate List Year (2024-2025) ITEM NO: 2 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. (SSR Item No: 46.12) (PMC Bhavan) Unique No (16019) Rate List Year (2024-2025) ITEM NO: 3 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR Item No. 21.02) (PMC Bhavan) Unique No (15202) Rate List Year (2024-2025) ITEM NO:4 Transportation of material obtained from excavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes, channels etc. Obtained from excavation, dismantling, loading in a Truck of minimum 5 Cu M capacity or designed capacity and transporting within the municipal limits or any designated place, unloading, stacking or spreading of material etc. complete. As directed by Engineer In charge (SSR Item No: 78.36) (PMC Bhavan) Unique No (17223) Rate List Year (2024-2025) ITEM NO: 5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (SSR Item No: 21.38) (PMC Bhavan) Unique No (15233) Rate List Year (2024-2025) ITEM NO: 6 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (SSR Item No: 21.37) (PMC Bhavan) Unique No (15232) Rate List Year (2024-2025) ITEM NO: 7 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 24.10) (PMC Bhavan) Unique No (15312) Rate List Year (2024-2025) ITEM NO: 8 Supply of Titanium FIFA Certified Soccer Turf EB-50 MM Series Grass:- Material /Dtex: PE12000 Structure Monofilament Yarn Pile Height (mm): 50 10cm): 15 Stitch rate (Per 10 cm):15 Guage (inch): 5/8 Stitches/m2:9450 Roll (Mtr) Width x Length: 4 or 2 x 30,5 Breaking: Triple Layers High wear resistance & perfect ball roll properties Economical System & UV Resistance Creative Technology & Quick Construction Natural & Beautiful appearance Good performance Reinforced Playability 3 years Turf Warranty 1 year Glue Warranty SBR Black Rubber Granuels in size of 8mm to 2.4mm 10kg/m2 Silica Sand 18kg/m2 Silica Sand 18kg/m2 Tape & European PU glue with hardner (Ration 2:1) According to Layout Colour-Green Plan Installation Installation of Turf with inhouse trained installation team Infill of Silica Sand & Granules Brushing & Line Marking. Including Transportation (SSR Item No: 72.4) (PMC Bhavan) Unique No (17099) Rate List Year (2024-2025) ITEM NO: 9 Cricket Pitch Turf Providing & Fixing Full Pitch Synthetic Turf 15 mm thk. of size 30 M X 2.75 M. over Tremix surface (Excluding Tremix) with suitable arrangement/adhesive as per manufacturers specification rolling with hand roller for removing air gaps as directed by Engineer In charge etc. complete. (SSR Item No: 72.1) (PMC Bhavan) Unique No (17096) Rate List Year (2024-2025) ITEM NO: 10 Providing & Fixing nylon net 35mmx35mmx1.75mm including top and side. (SSR Item No. 72.2) (PMC Bhavan) Unique No (17097) Rate List Year (2024-2025) ITEM NO: 11 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (SSR Item No: 42.52) (PMC Bhavan) Unique No (15904) Rate List Year (2024-2025) ITEM NO: 12 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR Item No: 23.01) (PMC Bhavan) Unique No (15297) Rate List Year (2024-2025) ITEM NO: 13 Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. (SSR Item No: 23.12) (PMC Bhavan) Unique No (15307) Rate List Year (2024-2025) ITEM NO: 14 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters (SSR Item No: 42.53) (PMC Bhavan) Unique No (15905) Rate List Year (2024-2025) ITEM NO 15 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon)coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coal on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fiuting in the five pan at nominal 180-250 mm center to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) with COLORBOND (R) steel quality super durable polyester paint (SSR Item No: 38.34) (PMC Bhavan) Unique No (15655) Rate List Year (2024-2025) ITEM NO: 16 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints. raking out joints, watering and scaffolding etc. Complete (SSR Item No. 27.13) (PMC Bhavan) Unique No (15381) Rate List Year (2024-2025) ITEM NO: 17 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (SSR Item No: 32.11) (PMC Bhavan) Unique No (15444) Rate List Year (2024-2025) ITEM NO: 18 Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. (SSR Item No: 44.10) (PMC Bhavan) Unique No (15994) Rate List Year (2024-2025)
Contract Date: Jun 19, 2026 Contract Value : 33.26 Lakh
Local Bodies No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 1.08 Lakh
Government Departments No of Bidders 12
West Bengal View Result →
36.
Educational and Research Institute #11294671 Price Bid
Tender for Purchase Of Equipments ( S.No 1 To S.No 08 ) For Chemistry Department , Purchase Of Equipments , Digital Electronic Balance /Analytical Balance • Load Capacity: Minimum 500 G • Readability: 0.01 G • Linearity: 0.02G • Display: Lcd/Led • Tare Function: Required • Top Pan Type • Power Supply: 220-240 V Ac, 50 Hz , Digital Tds Meter • Measuring Range: 0-9990 Ppm • Resolution: 1 Ppm • Display: Lcd • Automatic Temperature Compensation (Atc): Required • Waterproof: Minimum Ip67 Protection • Power Source: Battery Operated (Button Cell/Aaa Battery) , Digital Ph Meter Benchtop Model • Ph Type Microprocessor/Microcontroller • Ph Range: 0-14 • Resolution: 0.01 Ph • Accuracy: ±0.05 Ph Or Better • Combined Ph Electrode With Temperature Sensor • Two Or Three-Point Calibration Facility • Temperature Compensation Type Automatic • Display: Lcd • Power Supply: 220-240 V Ac, 50 Hz • Warranty Minimum 1 Year , Laboratory Heating Mantle (Knitted Glass Yarn) • Capacity: 500Ml • Temperature Range: Ambient To 350°C • Energy Regulator/Control Knob: Required • Power Supply: 220-240 V Ac, 50 Hz , Mortar With Pestle • Material: Porcelain • Size: 100-150 Mm Inner Diameter • Exterior: Glazed • Grinding Surface: Unglazed , Hot Plate • Top Plate Material: Cast Iron • Plate Size: Minimum 8 Inch Diameter • Power Rating: 2000 W • Temperature Range: Ambient To 200°C Minimum • Thermostatic Temperature Control: Required • Power Supply: 220-240 V Ac, 50 Hz , Electric Bunsen Burner • Electrically Operated • Energy Regulator/ Control Knob • Operating Temperature 800°C • Body: Stainless Steel • Power Supply Source: Corded Electric, Supplied With A Heavy-Duty, Heat-Resistant, Earth-Grounded, 3-Pin Power Cord (Minimum Length 1.2 Meters). • Power Consumption: Between 350 And 500W • Power Supply: 220-240 V Ac, 50 Hz , Water Distillation Unit • Output Capacity: 4 Litres Per Hour (Lph) • Ph Value: 5.5 To 7.0 • Conductivity (Raw Water Distillation):3.0 - 4.0 Μs/Cm Or Less • Glassware Material: Borosilicate 3.3 Glass (Pyrex/Duran Equivalent) • Heating Elements: Silicaenclosed Quartz Heaters Or Chromium-Plated Element Variants • Power Supply: 220-240 V Ac, 50 Hz / 60 Hz, Single Phase • Automatic Water Level Cut-Off
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 9
38.
Public Administrative Department #11290716 Price Bid
Tender for Mgnrega Materilas Supply For 2026-27 , 1 St Class Picked Jhama Brick (Traditional) , 1 St Class Traditional Brick ( Klin Burnt) , Silver Sand , Fine Sand , Medium Sand , Course Sand , Portland Cement , Brick Aggregrates (Single Size) 40 Mm Normal Size. , Stone Aggregrates (Single Size) 40 Mm Normal Size. (Without Carriage) , Stone Aggregrates (Single Size) 20 Mm Normal Size.(Without Carriage) , Stone Aggregrates (Single Size) 10 Mm Normal Size.(Without Carriage) , Stone Aggregrates (Single Size) 5.6 Mm Normal Size.(Without Carriage) , Stone Aggregrates 13.2 Mm Nominal Size. (Without Carriage) , Stone Aggregrates 11.2 Mm Nominal Size. (Without Carriage) , 22.4 Mm Machine Made Chips (Without Carriage). , Jhama Metal Kiln Burnt. ( Size As Direction Of Eic). , Thermocol 12.5 Mm Thick. , Polythene Sheet (150 Gm Per Sqm) , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller- 8 To 10 Tonne , Hire Charge Of Shuttering Plank (Without Prop )(25Mm-30 Mm) Including All Fittings . , Hire Charge Of Shuttering Plank(With Prop )(25Mm-30 Mm) Including All Fittings . , Hire Charge Of Shuttering Plank( With Prop (30Mm 37 Mm ) Including All Fittings . , Vibrator (Needle Type 40 Mm) , Steel Material- Tor Steel Rods/Hysd Bars/Tmt Bars(Sail/Tata/Rinl) (Fe415/Fe500/Fe500d,Conforms To Is 1786) , Steel Material- Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Ssl/Bmasl/Electro Steel)(Fe415/Fe500/Fe500d,Conforms To Is 1786) , Ms Ornamental Grill (Above 10 Kg/Sq.M Up To 16 Kg/Sq.M , 1220. Wire Mesh (Rabbit) , 3050. Galvanised Steel Corrugated Sheets , 1023. Galvanised Steel J Or L Hooks 8 Mm Dia , Galvanised Steel Bolt & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , G.I Lime Washere , Bitumen Washer , Stainless Steel Bolts/ Square Bar And Plates , Unslaked Lime , Supply Of First Aid Box Including Medicines (Specified By Pia) At Site. , Display Board(Ibs) , Display Board(Community) , G.I. Wire , Coconut Rope , Sal Ballah (10 Cm ) , Sal Ballah ( 125 Mm ) , Sal Ballah (15 Cm ) , Cement Primer(Interior) , Cement Primer(Exterior) , Primer( For Wood) , Cement Based Dust Putty , Black Japan Paint , Enamel Paint For Steel Grill , Synthetic Enemel Paint In Black Or Chocolate Shade. , Other Local Wood , Supplying, Fitting & Fixing Factory Made P.V.C. Door Frame Of Size 50 Mmx47 Mm With A Wall Thickness Of 5 Mm, Made Out Of Extruded 5 Mm, Pvc Sheet Miter , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Vitreous China Foot Rests 250X125x25 Mm , Ptmt - Towel Rail (600 Mm) , Fan Hook , Reinforced Cement Concrete Ventilator , Vitrified Floor Tile 60X60 Cm , Turpentine Oil , Hydraulic Door Closer Tuular Type Aluminium Section Body , Anodiesd Aluminium Hanging Type Door Stopper , Vitreous China Flat Back Wash Basin 450X300 Mm , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Supplying, Fitting & Fixing 30 Mm Thick Both Side Prelaminated Factory Made Solid Panel Pvc Door Shutter Consisting Of Outer Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size 19 Mmx19 Mm For Styles, Top And Bottom Rails, M.S. Frame Shall Have Cost Of Steel Primers Of Approved Make , Supplying, Fitting And Fixing M.S. Clamps For Door And Window Frame Made Of Flat Bent Bar, End Bifurcated With Necessary Screws Etc. By Cement Concrete(1:2:4) As Per Direction. (Cost Of Concrete Will Be Paid Separately) (A) 40Mm X 6Mm, 250Mm Length , Anodised Aluminium Butt Hinges Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification (I.S. 205/66) And Fitted And Fixed With Cadmium Plated Screws: (Vii) 100 X 75 X 4.0Mm , Anodised Aluminium Barrel / Tower / Socket Bolt (Full Covered) Of Approved Manufactured From Extruded Section Conforming To I.S. 204/74 Fitted And Fixed With Cadmium Plated Screws: (Vi) 200Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification (I.S. 230/72) Fitted And Fixed Complete: (A) With Continuous Plate Base (Hexagonal/ Round Rod) (Iii) 100 Mm Grip X 12 Mm Dia Rod. , (C) Supplying 6 Levers Godrej Crystal Satine Mortice Lock With Keys Including Fitting & Fixing Complete. , I) Iron Hasp Bolt Of Approved Quality Fitted And Fixed Complete (Oxidised) With 16Mm Dia Rod With Centre Bolt And Round Fitting. (A) 200Mm Long , Door Stopper.(Brass) , Red Lead Primer For Steel Grill , Interior Premium Imulsion(Plastic Paint) , Exterior Imulsion Weather Coat Paint , Distemper Paint , Supply Of Upvc Pipes (B Type) (For Soil Pipe Purpose) & Fittings Conforming To Is-13592-1992 (A) (I) Single Socketed 3 Meter Length (C) 160 Mm , (Ii) Plain Tee For Soil Pipe Purpose. (C) 160 Mm , V) Plain Y For Soil Pipe Purpose. (C) 160 Mm , Supplying, Fitting & Fixing Upvc Down Pipes A- Type And Fittings Conforming Tois:13592-1992 With All Necessary Clamps Nails, Including Making Holes Inwalls, Floor Etc. Cutting Trenches In Any Soil Through Masonry Concrete Structures Etc If Necessary And Mending Good Damages Including Joining Withjointing Materails (Spun Yarn, Valamoid/Bitumen/M-Seal Etc) Complete. A) Upvc Pipes: (Ii) 110 Mm. Dia. , B) Upvc Fittings: A) Plain Tee (Ii) 110 Mm. Dia. , D) Shoe (Ii) 110 Mm. Dia , Qgs Seed(10 Variety) , G.I. Hollow Pipe Squre Or Round Section For Roof Truss 50 Mm Dia Or 2 Inch Shape , G.I. Hollow Tubewell Pipe Round Section (Old) For Roof Truss 75 Mm Dia , Colour Interlock cement concrete Paver Block , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using , Precast Chequered Cement Tiles 22 Mm Thick Medium Shade , Upvcbend 87.50, 110 Mm Bend , Upvc Pipe Clip 110 Mm Bend , Check Valve 32Mm , Check Valve 40Mm , Bamboo , Bamboo ( 8 Cm- 10 Cm Dia) Including Fixing , 5000 Lit Hire , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangement . , Supply Of G. I. Pipes Of Tata Make Including Necessary Sockets - 15 Mm Dia.(Medium Quality) , Supply Of G. I. Pipes Of Tata Make Including Necessary Sockets - 25 Mm Dia.(Medium Quality) , Chlorinated Polyvinyl-Chloride(Cpvc) Pipe 25Mm Outer Dia. , Chlorinated Polyvinyl-Chloride(Cpvc) Pipe 15Mm Outer Dia. , 15 Mm Ptmt Bib Cock , Ptmt Push Cock 15 Mm Dia , Shower Jet , Vitreous China Squatting Plate Urinal , Mirror Of Superior Make Glass 60X45 Cm , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , Upvc Pipes (Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Empty Gunny Bag , Vermi Compost , Farm Yard Manure/Cowdung (@ Max 20% Moisture Content) , Lime Dust , Lime Stone Powder , Neem Khol Or Other Oil Seed Cake , Bone Dust , Neem Oil 10000 Ppm , 2:1:1 Npk Based Organic Manure , 5:1:1 Npk Based Organic Manure , Poly Tube (4 X 6 ) , Poly Tube (6 X 8 ) , Poly Tube (8 X 12 ) , Bio Pesticides , Bio Fungicides , Buckets , Turpoline Shed With 4 Nos. Bamboo Stucture
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 15
West Bengal View Result →
Contract Date: Ref. Documents Contract Value : 8.35 Crore
Government Departments No of Bidders 7
Uttar Pradesh View Result →
40.
Public Administrative Department #11286668 AOC
Tender For Construction/Repair Work In Record Room/Nazarat Department - (a) Bricks M-150 2 (b) Bricks M-100 3 (c) Bricks-Straight over brunt 4 (d) Bricks- Tiles (Ist Class) 5 (e) Brick Bats M-75 6 (f) Brick Bats (O.B.) 7 Fly ash Bricks (specification/strength should not be less then Bricks M-150)size 230x110x75mm 8 Fly ash Bricks Tiles (specification/strength should not be less then Bricks M-150)size 230x110x38mm 9 Fly ash Concrete curve Stone (specification/strength should as per mord/morth) size 300x300x150mm (M30) 10 (a) 5.00cm. Gauge 11 (b) 4.00 cm. gauge 12 (c) 2.50 cm. gauge 13 Stone Grading Materials Aggregate - For 37.5 mm Maximum size - 22.4 mm to 5.6 mm 14 Aggregate - For 37.5 mm Maximum size - 45 mm to 22.5mm 15 Aggregate - For 37.5 mm Maximum size - Below 5.6 mm 16 Aggregate - For 53 mm Maximum size - 22.5 mm to 5.6mm 17 Aggregate - Grading I (40 mm nominal Size) 10 mm - 5 / 4.75 mm 18 Aggregate - Grading I (40 mm nominal Size) 25 mm – 10mm 19 Aggregate - Grading I (40 mm nominal Size) 37.25 mm -25mm 20 Aggregate-Grading I 90 mm to 45 mm 21 Aggregate-Grading II 63 mm to 45 mm 22 Aggregate-Grading III 53 mm to 22.4 mm 23 Aggregates 22.4 mm to 2.36 mm for wet mix macadam 24 Aggregates 45 mm to 22.4 mm for wet mix macadam 25 Crushed Sand or Grit Passing 2.36 mm and retained on 180 micron 26 Crushed Stone Aggregate 26.5 mm to 75 micron 27 Crushed Stone chipping 13.2 mm nominal size 28 Crushed Stone Chipping 6.7 mm size 100% passing 11.2 mm and retained on 2.36 mm 29 Crushed Stone Chipping 6.7 mm size 100% passing 9.5 mm and retained on 2.36 mm 30 Crushed Stone chipping 9.5 mm nominal size 31 Crushed Stone Coarse Aggregate Passing 53 mm and retained on 2.8 mm 32 Fine aggregate/Crushed sand 2.36 mm to 75 micron 33 Stone Boulder of size 150 mm and below 34 Stone for Coarse Rubble Masonry 1st Sort 35 Stone for Coarse Rubble Masonry 2nd Sort 36 Stone for Random Rubble Masonry 37 Stone for Stone Set Pavement (300 mm x 200 mm x 150MM 38 Well Graded Material for Sub-Base - Grading I 2.36 mm below 39 Well Graded Material for Sub-Base - Grading I 53 mm to 9.5 mm 40 Well Graded Material for Sub-Base - Grading I 9.5 mm to 2.36 mm 41 Well Graded Material for Sub-Base - Grading II 2.36 mm below 42 Well Graded Material for Sub-Base - Grading II 26.5 mm to 9.5 mm 43 Well Graded Material for Sub-Base - Grading II 9.5 mm to 2.36 mm 44 Well Graded Material for Sub-Base - Grading III 2.36 mm below 45 Well Graded Material for Sub-Base - Grading III 4.75 mm to 2.36 mm 46 Well Graded Material for Sub-Base - Grading III 9.5 mm to 4.75 mm 47 Boulder with minimum size of 300 mm for Pitching at Site 48 Granular Material or hard murrum for GSB works at Site 49 Close graded Granular sub-base Material 37.5 mm to 9.5 mm 50 Close graded Granular sub-base Material 9.5 mm to 4.75 mm 51 Close graded Granular sub-base Material 4.75mm to 75 micron mm 52 Close graded Granular sub-base Material 2.36 mm 53 Coarse graded Granular sub-base Material 4.75mm to 75 micron mm 54 Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm 55 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 56 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 57 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 58 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 59 Coarse graded Granular sub-base Material 53 mm to 26.5mm 60 Stone screening material for WBM Grading-2 and 3 61 Miscellaneous Items Cement Grey PPC 62 Cement Port land (ordinary) 63 Cement white viz J.K./Birla 64 Wall Putty J.k / Birla white 65 Plaster of Parish Sakarni or eqvivalent 66 Cinder 67 Distemper oil bound 68 Dry Distemper ordinary of bes quality (Approved manufacture and approved quality viz. Burger, Asian, J&N 69 Glass Ordinary cut to size (a) 3mm thick (Wt. 7.5 Kg./sqmt.) 70 (b) 4mm thick (Wt. 10.0 Kg/sqmt.) 71 (c) 5.5 mm thick (Wt. 13.5 Kg/sqmt.) 72 White lime (unslacked) for White Washing 73 White Lead (Best Quality PIG Lead) 74 (d) G.I. Barbed wire 75 (e) Iron Sheet Galvanized Plain 22 gauge 76 (f) Iron Sheet Galvanized Plain 24 gauge 77 (g) -do- but corrugated 24 gauge 78 (h) -do- but black plain 18 gauge 79 (J) Expanded metal 2-0 cm mesh 16/17 guage 80 (K) M.S. binding wire 24 gauge 81 (i) 1x2 size of 10 gauge wire 82 (ii) 1x3 size of 10 gauge wire 83 (iii) Murga Jali 1/2x24 gauge 84 (iv) 1x2 size of 10 gauge wire 85 (i) F -d sections @ 1.58 Kg/R/M 86 (ii) F -B/T/T Secs. @ 2.40 Kg/R/M 87 (iii) F - Sections @ 0.74 Kg/R/M 88 (a) Super white 89 (b) Commercial white, coloured & black 90 Marble Dust (200 mesh) 91 Nails (Country) 92 Nails (Wire) 93 (a) Oil (linseed double boiled) 94 (b) Oil (Terpentine) 95 (a) Paint anticorosive Bitumenous 96 (b) Black Japan 97 (c) Superior Ready Mixed paints (Grade II) in 20 ltrs. Drums of approved manufactures and aporoved make 98 (i) Dark Green Oxide 99 (ii) Deep Black Oxide 100 (iii) Blue Oxide 101 (iv) Chocoiate Oxide 102 (e) (i) Red Oxide primer surface for steel (in 20 ltrs. Drum) (Approved manufactures and approved make) 103 (ii) Red lead paint ready mixed for roof (in 20 ltrs. Drum) (Approved manufactures and approved make) 104 (f)(i)PaintenamelGradeIsuperClass(Approved manufactures and approved make) 105 (ii) Paint (Aluminium) 106 (g) (i) Paint primer for wood 107 (ii) Paint primer for metal 108 (h) (i) Cement Primer of Berger or equivalent 109 (ii) Water proof cement paint (in 50 kg. drums) 110 (i) Clear synthetic (in 20 ltr drums) 111 (ii) Copall 112 (iii) Weather Coat cement paint for exterior 113 (iii) Weather Coat cement paint for exterior 114 Water Proofing compound (Dr. Fixit) 115 Polish (mansion & wax) 116 (iv) P.V.C. Pipe 110 mm dia & 6Kg./CM2 (ISI Marked) 117 (v) Same as above but 90 mm dia 118 (vi) Same as above but 75 mm dia 119 (v) Same as above but 140 mm dia 120 (a) Corrugated 121 (b) Plain 122 (i) Internal dia 5 cm (Wt. 11.41 Kg.) 123 (ii) Internal dia 7.5 cm. (Wt. 16.52 Kg.) 124 (iii) Internal dia 10 cm. (Wt. 21.67 Kg.) 125 (iii) Internal dia 15cm. (Wt. 21.67 Kg.) 126 (i) 5.0 cm dia (Wt. 2.30 Kg. ) 127 (ii)7.5 cm dia (Wt. 3.30 Kg.) 128 (iii) 10.0 cm. dia (Wt. 4.60 Kg.) 129 (i) 5.0 cm dia (Wt. 2.10 Kg. ) 130 (ii) 8.0 cm dia (Wt. 3.20 Kg.) 131 (iii) 10.0 cm. dia (Wt. 4.40 Kg.) 132 (c) C.I. Spout 23.0 cm Long 40 mm dia 133 (a) Rope (Moonj) 134 (b) Rope (HEMP) 135 (c) Rope (cotton) 136 (d) Spun yarn 137 Rivets 138 Coarse sand of approved quarry (Finess modules 2.20) at site of work in the district Saharanpur, Muzaffarnagar 139 Finesand(blendedtofineness modulus1.25) Saharanpur, Muzaffarnagar and Shamli 140 (a) Local Sand 141 Surkhi 142 White lime (slacked) 143 (a) Washers (Lumpet) 144 (b) Washers (Bitumen) 145 (c) Washers G.I. 146 J.Hooks 147 Wood presevator in 5 ltrs. Pack. 148 (a) Teak wood 149 (b) Sheesham 150 (c) Indian Sal 151 (a) Teak wood 152 (b) Sheesham 153 (c) Indian Sal/ maleshien 154 Fuel Wood (Dry) 155 (a) 2.2 cm width 156 (b) 3.50 cm. width 157 (c) Same as 48 (a) but 5 mm thick 158 (d) Same as 48 (b) but 5 mm thick 159 Antitermite treatment oil concentrate to 0.30 (as per IS 1307) 160 (i) 40mm thick 161 (ii) 50 mm thick 162 (a) KOTASTONE (machine cut ) 60 x 60 cm. 163 (a) Marble White 60 x 60 cm. 164 (b) Marble White 60 x 60 cm. 165 Granite stone black or Grey Polished 166 Granite stone black or Grey Polished 167 Polythene Sheet (125 Micron) 168 Plastic waste which is cleaned is cut into a size between 2.36mm and 600 microns and of maximum size 2.36 mm length and 2.00mm width. 169 (a) For Floor Size 300 x 300 170 (b) For Wall Size 200 x 300 171 (c) Vitrified Tiles size 600 x 600 172 RCC Hume Pipe 350mm dia 173 RCC Hume Pipe 450mm dia 174 (a) Ordinary 175 (b) For floor and tile work 176 Carpenter 177 Black Smith 178 Hammer man 179 Fitter 180 Painter 181 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 182 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 183 (b) Electrician Licensed with Kit or Koshal vikash certificate 184 (b) Electrician Licensed with Kit or Koshal vikash certificate 185 Mate 186 Beldar / Mali 187 Bhishti with Mushk 188 White Washer 189 Belder for bitumen or tar work 190 Glazier 191 Bhainsa Buggi with driver 192 Tractor trolley with driver excluding P.O.L. 193 Amin/Tracer 194 Chaukidar 195 Jeep/Truck/Tractor/Roller Driver 196 Generator Operator 197 Mixol Operator 198 Pump Operator 199 Cleaner 200 Sweeper (Full Time) 201 Sweeper (Part Time) 202 Tractor with harrow or water TankerTrolly with 203 Tractor with harrow or water TankerTrolly with 204 driver and P.O.L. 205 J.C.B. Machine with driver with P.O.L. 206 Crane (20-50 Tonnee) with Driver and P.O.L. 207 Ricksaw Thela with Driver 208 (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) 209 (a) As in item 251 (a) above but excavation in soil mixed with Moorum, shingle, kankar requiring the use of special tools and plant such as pickaxes, sabbals etc. (where machine can not move ) 210 (a) Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. (Royality removed by Govt. ) for small works/ Abadi area. (where machine can not move ) 211 (a)Add to items (251-253) for every additional 30 M. (100 ft.) lead or part of 30 M (100 ft.) or for every additional 1.50 M. (5 ft.) lift or part of 1.50 M. (5 ft.) 212 (a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measuredat a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. 213 (i) Cleaning jungle including up rooting ofrank, vegetations grass, push, wood trees and amplings of grith upto 30 cms. measured at a height of 1 M. aboveground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared. 214 (a) Same as above 259(i) above but grass only. 215 (a) Add to item no. 253 (a) for mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc. 216 (b) As in item no. 260 (a) above but for departmental works excluding Roller charges and its fuel, cost of water, allT&P. and sundries etc. but including carriage of water to site. 217 Upto ½ Km 218 Ist Km. (If lead is beyond ½ Km.) 219 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 220 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 221 As in item 273 above but in proportion 10:5:1 222 As in item 273 above but in proportion 8:4:1 223 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 224 (b) Same as item no. 279 (a) but in proportion of 1:3:6 225 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 226 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 227 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 228 As in item 273 above but in proportion 10:5:1 229 As in item 273 above but in proportion 8:4:1 230 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 231 (b) Same as item no. 279 (a) but in proportion of 1:3:6 232 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 233 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 234 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 235 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 236 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 237 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 238 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 239 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 240 As in item 309 above but for walls of one brick thick, add for extra labour 241 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 242 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 243 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 244 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 245 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 246 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 247 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 248 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 249 As in item 309 above but for walls of one brick thick, add for extra labour 250 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 251 Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 252 As in item No. 401 but for sheesham wood 253 As in item no. 401 but with Indian Sal wood 254 Supply & fixing of 4.5 Cm. thick teak wood part panelled and part glazed door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glass to be 4 mm. thick. Fitting with necessary screws to be supplied by the deptt. 255 Providing and fixing Glass panes with teak wood beading in doors and windows as desired by the Engineer incharge including cost of all materials, fittings, hinges, labour, T&P all etc. required for proper completion of the work. 256 As in item no. 409 above but fully panelled. 257 As in item no 409 above but fully glazed. 258 As in item no. 409 above but 3.8 cm. thick. 259 As in item no. 411 above but 3.8 cm. thick. 260 As in item no. 412 above but 3.8 cm. thick. 261 As in item no. 409 above but 3.8 cm. thick, Shisham wood. 262 As in item no. 411 above but 3.8 cm. thick, Shisham wood. 263 As in item no. 412 above but 3.8 cm. thick, Shisham wood. 264 Supply and fixing of 3.8 cm. (1½) thick Teak wood door and window shutters with panels of heavy Quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm. (1/10 or 1/12 or 1/16 inch) mesh or any other size, with necessary beadings, including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including two coat of black Japan on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 265 As in item (450) above but in shisham wood. 266 Supply and fixing Galvanized Mosquitos proof heavy quality S.S.Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3x3/8)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. 267 As in item (455) above but with shisham wood battens. 268 As in item (455) above but with Indian Salwood battens. 269 As in item (455) above but with Deodar wood battens. 270 As in item no. 409 but Indian Commercial flush shutters 35 mm. thick (excluding cost of all fitting). 271 As in item no. 409 but Indian Commercial flush shutters 32 mm. thick (excluding cost of all fitting). 272 As above 471 but Double Leaf Add. extra. 273 Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) 274 As above item no. 473 Aluminium Fittings ISI marked. 275 Supply and fixing of 3.8 cm. (1½) thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings 276 Supply and fixing 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fitting and glass panes (Double Leaf) 277 As in item no. 9.26 above but for single leaf. 278 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 279 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 280 As in item no. 9.29 above but for single leaf. 281 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 282 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 283 As per item above A but with shisham wood batton 284 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 285 Fixing of Curtain rods (Labour only) 286 Fixing of Curtain palmets (Labour only) 287 50x20 mm 288 50x12 mm 289 With 2nd class teak wood beading 62X19 mm. 290 300x16 mm 291 250x16 mm 292 250x10 mm 293 200x10 mm 294 150x10 mm 295 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 296 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 297 As in item no. 9.29 above but for single leaf. 298 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 299 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 300 As per item above A but with shisham wood batton 301 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 302 Fixing of Curtain rods (Labour only) 303 Fixing of Curtain palmets (Labour only) 304 50x20 mm 305 50x12 mm 306 With 2nd class teak wood beading 62X19 mm. 307 300x16 mm 308 250x16 mm 309 250x10 mm 310 200x10 mm 311 150x10 mm 312 250x10 mm 313 200x10 mm 314 150x10 mm 315 100x10 mm 316 125 mm 317 100 mm 318 75 mm 319 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI C sections (39mm x 19mm x O.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric L corners .The panel shall be filled with 3mm thick high - pressure compact laminate asper manufacturers specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). 321 With decorative veneering on one side and commercial veering on other side. 322 With non decorative veneering on both sides. 323 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 324 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 325 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 326 Same as in items 502 above but steel Z Section window excluding Glass panes.(ii) Openable panels 327 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 328 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 329 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 330 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 331 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 332 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 333 with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 334 As per item no 517a but with steel strip inplace of angle iron. 335 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 336 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 337 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 338 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 339 providing and fixing top cover for rolling shutters 2.50 meter wide. 340 Providing and fixing ball bearing for rolling shutters. 341 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 342 (b) Shutters above 16.8m² (180 sqft) area 343 (i) Door chaukhat 344 (ii) window chaukhat 345 (iii) Ventilator chaukhat 346 (iv) Stair case Nosing 347 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 348 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile B 349 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile C 350 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile E 351 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 352 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 353 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 354 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 355 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 356 Same as in items 502 above but steel Z Section window excluding Glass panes. (ii) Openable panels 357 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 358 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 359 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 360 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 361 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 362 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 363 Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 364 As per item no 517a but with steel strip inplace of angle iron. 365 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 366 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 367 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 368 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 369 providing and fixing top cover for rolling shutters 2.50 meter wide. 370 Providing and fixing ball bearing for rolling shutters. 371 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 372 (b) Shutters above 16.8m² (180 sqft) area 373 (i) Door chaukhat 374 (ii) window chaukhat 375 (iii) Ventilator chaukhat 376 (iv) Stair case Nosing 377 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 378 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B 379 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 380 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E 381 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 382 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 383 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. 384 Same as in item 574 above but Flush pointing Deduct from item 574. 385 Same as in item 574 above but in floors deduction from item 574 & 575. 386 Struck cement pointing with 1:2 cement and fine sand of 1.25 F.M. mortar with colouring including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 387 12 mmthick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. 388 As in item (582) above but with cement and approved coarse sand mortar in 1:3. 389 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:4. 390 As per Item No. 584 but with 1:4 cement and Corse sand 391 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:6. 392 Add for extra labour to all item of plaster if done ceiling. 393 Add for extra labour and materials for plaster over rough face of one brick wall. 394 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 395 Same as above item but 1.20cm. thick instead of 2 cm thick. 396 Engraving lines in plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-incharge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (add for extra labour to all items of plaster), 397 Marking drip coarse in sun shades or facie with 1:3 cement and fine sand mortar as per direction of Engineer-in-charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 398 20 mm thick rough cast exterior cement plaster on walls consisting 10 mm thick backing cast of 1:3 cement mortar (1 cement :3 coarse sand) and 10 mm thick finishing coat of 1:3 cement mortar (1cement :3 coarse aggregate of size 6mm to 12 mm ) including arises, chamfers and/or rounded angles not exceeding 80 mm. 399 2.5 cm (1) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid in panels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 400 (A) As in item no. 601 above but without base concrete. 401 (B) As in item no. 601 above but base concrete consisting of brick ballast and fine sand & cement in prop. 12:6:1 402 As in item (601) above but floor shall be 4 cm (1½) thick instead of 2.5 (1) thick and without base concrete. 403 Add in item (601) to (603) and (605) when floors are polished including supply of extra cement, chapra batti, Carborandum stone, all other materials, labour, Tools & plants etc. required for proper completion of the work. Marble dust shall be added in the floting coat in ratio of 5:1 (cement and marble dust) if necessary but no extra amount will be paid for it. This includes final finish with french mansion polish or any other approved polish. 404 M-150 Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming including supply of all materials labour and Tools and Plants etc. required for proper completion of the work. 405 As in item (615) above but bricks laid flat. 406 Granolithic marble flooring 2.5 cm. (1) thick consisting of 2 cm. (3/4) thick layer of 1 part cement, 2 parts of approved coarse sand and 4 parts of 2 cm. (3/4) graded approved stone chips including 5 mm (¼) thick surface coat with ordinary cement, black and white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 1.5 mm. (1/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-incharge and polished by hand or machine and finally finished with French Mansion Polish or any other approved polish and including 8 cm (3) 1:6:12, concrete base, including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work 407 As in item (620) above but when white cement is used in top 5 mm (¼) layer. 408 As in item no. (620) above but when coloured floors are to be made. 409 Granolithic marble dado 2 cm. (¼) thick consisting of 15 mm. (9/16) thick layer of one part cement, 2 parts of approved coarse sand including 5 mm. (3/16) thick surface coat with ordinary cement black or white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 15 mm. (9/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-in- charge and polished by hand or by machine and finally finished with French Mansion Polish or any other approved polish including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work. 410 Same as item no. 625 above but 12 mm. thick dado. 411 As in item (625) above but when white cement is used in top 5 mm. (3/16) thick layer instead of ordinary cement. 412 As in item (625) above but when coloured dados are to be made. 413 Supply and fixing 6 mm. (¼) China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants 414 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (a) of 2.2 cm. depth 415 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (b) of 3.5 cm. depth 416 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (c) of 2.2 cm. depth and of 5 mm thickness 417 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete(d) of 3.5 cm. depth and of 5 mm thickness 418 Extra for making chequers of approved patterns on cement concrete, floor, steps landing etc. 419 Supply and fixing of Kota stone in floor ing 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 420 As in item no. New item (1) above but 25 mm thick. 421 Supply and fixing 10 to 12 mm thick Kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 422 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer - in- charge 423 Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. 424 As in item (641) above but for every coat after first coat. 425 As in item (642) above but for every coat on previously painted old wood or Iron work including its sand papering, rubbing and cleaning as required for proper completion of work. 426 Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 427 As in item (644) above but for every coat after the first coat. 428 As in item (645) above but for every coat over previously painted surface 429 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 430 As in item (647) above but for every subsequent coat on previously treated surface . 431 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 432 As in item (649) above but for every coat after the first coat. 433 As in item (649) above but for every coat after the previous coat or subsequent coat. 434 One coat hot coaltar on new surface including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 435 As in item (652) above but for every coat after the first coat or on previously treated surface. 436 One coat surface or other approved preservative on new wood work, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 437 As in item (654) above but for every coat or on previously treated surface. 438 Oiling wood work with double boiled linseed oil including supply of all materials labour, Tools & plant etc. required for proper completion of the work. 439 Removing paint or varnishing with paint remover or with caustic Soda, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 440 Polishing with French Polish or wax polish (in proportion 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by weight) on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth and a coat of wood filter including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 441 As in item No. (658) above but on previously polished wood or wood based surface. 442 Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 443 Same in item no. (660) but for each coat of water proof cement paint after the first two coat to give an even shade 444 Finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 445 Same aas item 660 but for weather coat. 446 Sameaasitembut over previouslypainted surface weather coat. 447 Providing cement primer on old/new surfaces 448 Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 449 Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 450 White washing one coat including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 451 As in item 671 above but Two coats. 452 As in item 671 above but Three coats. 453 Colour washing one coat using approved. Colouring material buff, blue, gray or brown shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 454 As in item 674 above but two coats. 455 As in item (674) but using approved colouring material of pink, green or yellow shade. 456 As in item 676 above but two coats. 457 As in item (674) above but colour washing with copper or iron sulphate one coat. 458 As in item 678 above but Two coat. 459 Cement washing including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 460 One priming coat and one coat of dry distemper on new work including supply of all materials, labour, Tools & plant etc. reqired for proper completion of work. 461 As in item (681) but for each coat of distemper after the first coat 462 Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 463 Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). 464 As in item (692) above but in mud mortar. 465 Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 466 Dismantling Jack arched or wooden beam and barga roofs including beam, roof concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 467 As in item (695) above but only roof concrete. 468 Dismantlingcementconcreteorbrickor granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 469 As in item (697) above but floor to be stone flagged or tiled floor. 470 Dismantling corrugated Iron roofs walls or partitions,includingpurlins,battensand vertical supports and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 471 Dismantling of girders, trusses and other steel work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 472 Dismantling doors or windows including chaukhats with hold fast and including stacking of materials as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 473 Dismantling doors or windows leaves including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 474 Dismantling doors or windows including chaukhats but excluding hold fast and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 475 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 476 Raking out joint of brick work in cement or lime morter to a depth 1 cm. (3/8) including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 477 Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 478 Supply and fixing of 10cm. (4) internal dia A.C. down pipes Everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3mm. (1 x1/8) fixed to walls with cement motar (1:2) and including supply of 15 cm (6) long 6mm. (1/4) dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. 479 As per item No. 730 above but for 10.0 cm. PVC down pipe.(kissan/suprime make) 480 As per item No. 730 above but for 7.5 cm. PVC down pipe. .(kissan/suprime make) 481 As per item No. 730 above but for 5.00 cm. PVC down pipe..(kissan/suprime make) 482 Providing and injecting chemical for preconstruction anttermite treatment and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding or pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 (part II 1981) Aldrine emulsifiable concentrate or any other approved material such as heptachlor of chlordane will be used. The rate of application of chemical emulsion shall be as follows :- 1.Treatment for massonary and foundation 5 liters per sqm. 2.Back fill in immediate contact with foundation 7.5 liters per sqm. 3.Treatment of surface of plinth filling 5 liters per sqm. 4.Treatment of soil along external perameter of Building 7.5 liters per sqm 5. Treatment of soil under external parameter 5 liters per sqm. 483 Providing & injecting chemical for post Constructional anti termite treatment with drilling holes at junction of floor with walls & pillars, the application of chemicals shall be as per relevant I.S. code and the rate of application of chemical shall also be as provided in the I.S. code, including quarterly inspection and providing required treatment for one year. As direction by the Engineer-in-charge. 484 Consolidation of Kankar by hand rammer including opening out stacks sorting kankar into three sizes, repairing patches in existing road suface with kanker making medhi to retain water and ramming and also including carriage of metal upto 30 meters (100 ft.) carriage of water 200 metre supply and maintenance of barriers and all tools and plants required for proper completion of work, kankar to be supplied to the contractor free at site. 485 (A) As in item No. 752 above but 12 cm. (loose) thick coat of stone ballast. 486 (B) As in item No. 755 (a) above but excluding roller charges. 487 (D) As in item No. 755 (a) above but upto 10 cm. (loose) thick coat. 488 (E) As item No. 755 (b) above but upto 10cm. (loose) thick coat. but excluding roller charges. 489 Water allowance to be allowed on item No. 751 to 756 including carriage & cost of water where water is not available at site. 490 Dag belling 15cm (6) deep in one line aligned with flags and jhandies as directed by Engineer- in-charge. 491 Painting white/coloured traffic lines 8-15 cm. wide in three coats with approved road making paint (spirit base) as directed by the Engineer- incharge, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 492 Painting on divider 1 priming and two coats of enamel paint including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 493 As per item above but every coat after Ist coat and on old surface 494 Brick soling with strainght over burnt bricks laid flat and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8) depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. 495 As in item No. 762(a) above but with bricks laid on edge. 496 M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8) depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. 497 Renewing patries 1.5 metere wide including dressing surface filling upto 8cm (3) depth and making namunas, at every 15 metre apart on either side of the road true to patri template with side slopes of 1:2 etc. trenches for taking the earth to be so dug that they form a continuous side drain at road boundary. 498 Brick lining on both side of the road of M-150 bricks 7 cm. wide. 11 cm. deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-charge. 499 Cleaning the existing painted /primed surface and laying premix 2cm. (3/4) thick over a tack coat with graded approved grit and bitumin (labour only) including heating the paint and grit to the required temperature and mixing either in mixer/ hand drum or by manual including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge . including labour charges for tack coat. 500 As in item No. 781 above excluding T&P and sundries etc. for departmental works. 501 As in item No. 781 above but in Patches. 502 As in item No. 781(a) but in Patches. 503 Cleaning the premix surface and laying seal coat with approved 6mm (1/4) graded grit and bitumin (labour only) including heating the paint to the required temperature and mixing either in mixer, hand drum including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge including all T&P and sundries to be arranged by the contractor but exculding roller charges and fuel wood. 504 As in item No. 783 above but in Patches. 505 Providing and applying primer coat over prepared surface of granular base with slow setting bitumen emulsion with spray set including cleaning of W.B.M. surface spreaying primer @ 0.6 kg/sqm (excluding emulsion) all labour T & P etc. as per MORT&H Specification. (labour rate only) in patches 506 Brick soling with straight over brunt bricks laid flat and dry (labour only) including preparation of subgrade to prescribed camber, filling joints with local earth spreading a blinding coat 1 cm (3/8) depth of local earth over the entire surface and including labour T&P etc.required for proper completion of the work.. 507 As in item No. 785 above but with bricks laid on edge. 508 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(i) 350 mm dia 509 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE (ii) 600 mm dia 510 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iii) 800 mm dia 511 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iv) 900 mm dia 512 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(v) 1000 mm dia 513 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work, (i) 350 to 600 mm dia 514 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work(ii) 800 to 1000 mm dia 515 (a) Laying and Consolidation of stone ballast in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 516 (b) Laying and Consolidation of Brick ballast/ bats in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 517 Barricating with approved wooden ballies vertical 10cm. Dia and 2m long fixed in ground 45 cm Deep and 2m apart including 2 rows of horizontal ballies not less than 8cm Dia 45 cm apart centre to centre tied by narial rope including cartage of all material and also including hire charges of ballies complete as direction of Engineer In charge. For two days 518 As item above but for more than 02 days. 519 As per item above but with three rows of horizontal ballies. 520 Dismantling of old brick laid on edge kharanja including stacking of old bricks . 521 As per item above but bricks laid flat / C.C. Interlocking tiles 522 Providing & laying of hot applied thermoplastic compound 2.5 m.m. thick including reflectorising glass beads @ 250 gms./Sq.mt. area. Thickness of 2.5 mm. inclusive of surface applied glass beads as per I.R.C. 2.35. The finished surface must be level, uniform and free from steaks and holes.Supplying & laying of Empty cement bags 523 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 524 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 525 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 526 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 527 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 528 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 529 Providing and laying of interlocking concrete Block pavement having thickness 60 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 530 Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 531 Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 532 Providing & supply gunny bags including cost of sand and stitching of bags and laying in position. 533 Laying of interlocking tiles (labour only) 534 Disposal or malba 535 primaxing carpet 20 mm 536 seal coat 537 earth work in filling 538 45-90 mm gauge stone ballast 539 53-22.4 mm gauge stone ballast 540 stone screening meterial 541 mild steel for rcc work 542 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes 543 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargeb) 20 mm dia. nominal outer dia Pipes 544 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargec) 25 mm dia. nominal outer dia Pipes 545 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charged) 32 mm dia. nominal outer dia Pipes 546 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargee) 40 mm dia. nominal outer dia Pipes 547 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. a) 15 mm dia. nominal outer dia Pipes 548 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes 549 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. c) 25 mm dia. nominal outer dia Pipes 550 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. d) 32 mm dia. nominal outer dia Pipes 551 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin- Charge. External work.. a) 15 mm dia. nominal outer dia Pipes 552 b) 20 mm dia. nominal outer dia Pipes 553 c) 25 mm dia. nominal outer dia Pipes 554 d) 32 mm dia. nominal outer dia Pipes 555 e) 40 mm dia. nominal outer dia Pipes 556 f) 50 mm dia. nominal outer dia Pipes 557 g) 62.50 mm dia. nominal outer dia Pipes 558 h) 75 mm dia. nominal outer dia Pipes 559 i) 100 mm dia. nominal outer dia Pipes 560 j) 150 mm dia. nominal outer dia Pipes 561 Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer-in- charge. a) 15 mm nominal bore 562 b) 20 mm nominal bore 563 Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. a) 15 mm nominal bore 564 b) 20 mm nominal bore 565 Providing and fixing ball valve (brass)ISI marked approved quality complete , High & low pressure with plastic floats complite as per direction of Engineer-in-charge.High or low pressure with plastic floats: a) 15 mm nominal bore 566 b) 20 mm nominal bore 567 c) 25 mm nominal bore 568 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 a) 15 mm nominal bore 569 Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms. a) 15mm nominal bore. 570 Providing and fixing C.P. brass stop cock (concealed) of approved quality confirming to ISI standards IS 8931 a) 15mm nominal bore. 571 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 a) 15 mm nominal bore 572 Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in- charge. 573 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White glazed earthen ware(Indian Type)/Neycer W.C. Pan 580 mm Dia. 574 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 575 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern 576 Single half stall urinal with 5 litre PVC. automatic flushing cistern 577 Range of two half stall urinals with 5 litre PVC. automatic flushing cistern 578 Range of three half stall urinals with 10 litre PVC. automatic flushing cistern 579 Range of four half stall urinals with 10 litre PVC. automatic flushing cistern 580 Single squatting plate with 5 litre P.V.C. automatic flushing cistern 581 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern 582 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern 583 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps 584 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 585 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 586 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 587 White Vitreous China Angle back wash basin of size 600x480 mm with single 15 mm C.P. brass pillar tap 588 White Vitreous China Angle back wash basin of size 400x400 mm with single 15 mm C.P. brass pillar tap 589 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 590 Providing and Fixing while vitreous china pedestal for wash basin completely at the back for the reception of pipes and fittings. 591 ProvidingandfixingStainlessSteelAISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 592 510x1040 mm bowl depth 250 mm 593 510x1040 mm bowl depth 225 mm 594 510x1040 mm bowl depth 200 mm 595 470x420 mm bowl depth 178 mm 596 Long pattern W.C. pan size of 580 mm 597 Orissa pattern W.C. pan size 580x440 mm 598 Providing and fixing water vitreous china pedestal type (Eurepean type/wash down type) 599 Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer–in- charge 600 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete.10 litre capacity – white 601 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 602 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete. Semi rigid pipe 32 mm dia / 40 mm dia 603 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 604 Providing and fixing soil, waiste and vent pipes: 100 mm dia Sand cast iron S&S as per IS - 3989 605 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 606 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 75 mm dia meter 607 Sand cast iron S&S as per IS - 1729 608 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 609 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 610 Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand): 100 mm dia 611 75 mm dia 612 50 mm dia 613 White vitreous china dual purpose W.C. pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend ISI Mark Kajaria eqvilent Indian made Brand. 614 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/6 litre (adjustable to 4 litre/ 8 litre), including seat cover and cistern fittings, nuts, bolts and gasket etc complete. ISI Mark Kajaria eqvilent Indian made Brand. 615 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design. 100x100 mm size P type 616 with common burnt clay (non modular) bricks of class-150 150x100 mm size p type 617 with common burnt clay (non modular) bricks of class-150 618 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg 619 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg 620 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensions 621 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter 622 Square shape 450 mm internal dimension 623 Circular shape 500 mm internal diameter 624 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg 625 Providing and fixing toilet paper holder standrad size ISI marked C.P. brass as per direction Engineer-in-charge 626 Painting letters upto 2.5 cm. size including supply of all materials, labour & tools and plants etc. required for proper completion of the work. 627 As in item 817 above but size above 2.5 cm. but upto 8 cm. 628 As in item no. 817 above 8 cm. but upto 15 cm. 629 Repairing letters upto 2.50 cm. size including supply of all meterials labour and tool and plants etc. required for proper comletion of the work 630 As in item NO. 820 above but size above 2.5 cm. but upto 8 cm. 631 As in item NO. 820 above but size above 8 cm. but upto 15 cm. 632 Painting Border line upto 2.5 cm. wide 633 Painting Border line upto 2.5 cm. to 5 cm. wide 634 Re-Painting Border line upto 2.5 cm. wide 635 Re-Painting Border line upto 2.5 cm. to 5 cm. wide 636 Repainting and relettering number plates on ends of parapets of culverts and bridges and boader line in letters height from 2.5 cm. to 8 cm. with approved enamael paint of superior quality including supply of all materials, labour and T & P etx. required for proper completion of the work. 637 Repainting and relettering of K.M. stones as per IRC design (except 5th km. Stone) with approved enemal paint of superior quality including supply of all materials, labour and T & P etc. required for proper completion of the work. 638 As in item 832 above but 5th km. stone 639 As in item 832 above but 200 H.M. stone 640 Varnishing /Painting on chair /side rack with stand and such other items including all matrial labour T&P etc. complite for proper completion of the work. 641 Varnishing /Painting on Double bed including all matrial labour T&P etc. complite for proper completion of the work. 642 Varnishing /Painting on Singal bed/ Sofa/ Dining table including all matrial labour T&P etc. complite for proper completion of the work. 643 Cutting and repairing of walls or windows for fitting of window type A.C. inculding wooden bidding after fixing. 644 White washing and hirmichi washing of culverts and trees upto a distance of 5 M. from the edge of black top in three bends of 1 width at a height of 1 M. from the crown of the road on either side of road. including supply of all materials, labour, T & P etc. required for proper completion of the work. 645 (a) Same as above but with departmental labour 646 Retro-Reflectorised Traffic Signs Direction and place identification signs up to 0.90 sqm Size BoardProviding and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 647 Direction and place identification signsMore then 0.90 sqm Size Board Providing and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 648 Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM. D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 649 Retro Reflective Signs (Type-IV Sheet) for both side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 650 Retro Reflective Signs (Type-IV Sheet) for both side ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 651 Retro-reflectorised Traffic sign as per IRC 67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm) 652 b) 60cm equilateral triangle with diffinitation plate size (20cm x 60cm) 653 c) 60 cm Circular with diffinitation plate (20 cm x 60 cm) 654 d) 80mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 655 e) 60mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 656 f) 60 cm x 60 cm square with diffinitation plate ( 20 cm x 60 cm) 657 g) 90 cm high octagon 658 h) 50 x 60 cm single chevron 659 i) 155 x 60 cm Double chevron 660 j) 30 x 90 cm (Left/Right) Object Hazard 661 k) 45 x 90 cm two way Object Hazard 662 l) 30 x 90 cm +45 x 78 cm Guarded/unguarded Railway crossing 663 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of work. 664 Supply, fixing and hoisting of 6.00-7.00 m. spanCantilever Structure in position with one vertical post of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffners & two nos. 8 mm thick MS plates at top welded with structure of 40 mm NB (M) pipe comprising of horizontal, vertical & bracing pipe of 32 mm NB (M) as per structural design requirements & approved drawing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of E/I charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the signage structure inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of the work. 665 Supply, fixing and hoisting of 12.00 - 15.00 M span Overhead Structure in position with two vertical posts of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffeners & two nos.10 mm thick MS plates at top welded with structure of 50 mm NB (M) pipe comprising of horizontal, vertical pipe of 40 mm NB (M) and bracing pipe of 32 mm NB (M) as per structural design requirements and approved drawing with vertical and lateral clearance given in clause 802.2 and design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of the work. 666 Reflective Raised Pavement Marker Providing and fixing of raised 667 Reflective Raised Pavement Marker with shanks Providing and 668 Supplying & fixing of Linear Delineator System (LDS)panels made of Micro prismatic Retro Reflective sheeting Type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing Concrite / brick work with 16 Nos Fastner/ screw as per IRC 79-2019 -Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work. 669 Providing & fixing of Bollard made (Single side) out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty,etc all T&P/machine material and labour required for proper completion of work. 670 Supply & fixing of Bollard (Double side) Made out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd. fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of work. 671 Metal Beam Crash Barrier 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 672 Metal Beam Crash Barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2.0 m high, 1.5 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete 673 TREE PLATE S/F Reflective tree plate having Size 15 Cm x15Cm, Consisting type XI sheeting over 1.5mm thick aluminium sheet including labour. Material T&P etc for proper completion of the work. 674 Cartage of Ballast, Kankar, Coal, Grit or Sand etc. including loading and unloading but excluding stackings on pucca roads. I st Km. 675 2 nd Km. 676 3 th Km. 677 4 th Km. 678 5 th Km. 679 6 th Km. 680 7 th Km. 681 8 th Km. 682 9 th Km. 683 10 th Km. 684 11 th Km. 685 12 th Km. 686 13 th Km. 687 14 th Km. 688 15 th Km. 689 16 th Km. 690 17 th Km. 691 18 th Km. 692 19 th Km. 693 20 th Km. 694 21 th Km. 695 22 th Km. 696 23 th Km. 697 24 th Km. 698 25 th Km. 699 26 th Km. 700 27 th Km. 701 28 th Km. 702 29 th Km. 703 30 th Km. 704 31st to 75 Km. 705 76st to 100 Km. 706 100st to 200 Km. 707 As in item (231) above but for cement, steel or other materials : Ist Km. 708 2nd and 3rd Km. 709 4th and 5th Km. 710 6th to 10th Km. 711 11th to 20th Km. 712 21st to 30th Km. 713 31st to 50th Km. 714 51 to 75 Km. 715 76th to 100 Km. 716 101st to 200 Km. 717 201st to 250 Km. 718 As in item (231) above but for tar, bitumen Asphalt, Mobile oil or other such materials 1st Km. 719 2nd and 3rd Km. 720 4th and 5th Km. 721 6th to 10th Km. 722 11th to 20th Km. 723 21st to 30th Km. 724 31st to 50th Km. 725 51st to 75 Km. 726 76th to 100 Km. 727 101st to 200 Km. 728 201st to 250 Km. 729 Cartage of brick/stone ballast, kankar coal shingle or sand etc. by head load upto 90 metres (3 chains) including loading and unloading but excluding stacking 730 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (a) Loading 731 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (b) Unloading 732 Unloading of cement, tar or bitumen drum lighter steel sections and other such materials from wagons and stacking the same on platform. 733 As in item No. 236 (a) above but for heavy articles like joist etc. machinery and unwieldly structures 734 Stacking of bricks on edge in row of two to a height of ten brick and in a length of 100 bricks after dressing levelling of the site as required where bricks are to be stacked. 735 Stacking of coal, surkhi, sand, lime, stone grit, stone/brick ballast & boulders etc. to the required sizes to stacks after necessary dressing of site where such materials are to be stacked. 736 237 (a) above but when the materials are either cement / steel. 737 Loading of cement, tar or bitumen drums, lighter sections of steel and other such materials into wagons. 738 As in item 238 (a) above but for heavy articles like joist, machinery and unwieldly structures. 739 Cartage of R.C.C. Hume pipe 30cm. to 46cm. dia and 1.8 meter to 2.5 metre in length (including collars for which nothing extra will be paid ) including loading and unloading. 1st Km. 740 2nd and 3rd k.m. 741 4th and 5th k.m. 742 6th to 10th k.m. 743 11th to 20 th k.m. 744 21st to 30 th k.m. 745 31st to 50 th k.m. 746 51st to onward k.m. 747 As in item No. 239 (c) above but for R.C.C. Hume pipe 50 to 95 cm. dia and 1.8 meter to 2.5 meter in length carriage to be done by truck or by thela. 1st Km. 748 2nd and 3rd k.m. 749 4th and 5th k.m. 750 6th to 10th k.m. 751 11th to 20 th k.m. 752 21st to 30 th k.m. 753 31st to 50 th k.m. 754 51st to onward k.m.
Contract Date: Jun 15, 2026 Contract Value : Ref. Document
Local Bodies No of Bidders 10
Uttar Pradesh View Result →
41.
Public Administrative Department #11284217 Technical Bid
Tender for Supply Of Essential Materials For Repair And Maintenance Of Water Mains Under Water Works Ward Divisions In H Wards In Western Suburbs , Supply Of Essential Materials For Repair And Maintenance Of Water Mains Under Water Works Ward Divisions In H Wards In Western Suburbs , Coupling Ci Galvanised 15 Mm Ø , Coupling Ci Galvanised 20 Mm Ø , Coupling Ci Galvanised 25 Mm Ø , Coupling Ci Galvanised 32 Mm Ø , Coupling Ci Galvanised 40 Mm Ø , Coupling Ci Galvanised 50 Mm Ø , Pipe Tapping Drills 15 Mm , Pipe Tapping Drills 20 Mm , Pipe Tapping Drills 25 Mm , Pipe Tapping Drills 32 Mm , Pipe Tapping Drills 40 Mm , Pipe Tapping Drills 50 Mm , Tap And Drill 65 Mm , 15 Mm Ø Bend Ms Galvanised , 20 Mm Ø Bend Ms Galvanised , 25 Mm Ø Bend Ms Galvanised , 32 Mm Ø Bend Ms Galvanised , 40 Mm Ø Bend Ms Galvanised , 50 Mm Ø Bend Ms Galvanised , Plug Malleable Ci Galvanised 15 Mm Ø , Plug Malleable Ci Galvanised 20 Mm Ø , Plug Malleable Ci Galvanised 25 Mm Ø , Plug Malleable Ci Galvanised 32 Mm Ø , Plug Malleable Ci Galvanised 40 Mm Ø , Plug Malleable Ci Galvanised 50 Mm Ø , 15 Mm Ø Elbow Plain Ci Galvanised , 20 Mm Ø Elbow Plain Ci Galvanised , 25 Mm Ø Elbow Plain Ci Galvanised , 32 Mm Ø Elbow Plain Ci Galvanised , 40 Mm Ø Elbow Plain Ci Galvanised , 50 Mm Ø Elbow Plain Ci Galvanised , 15 Mm Ø Nipple Double Ci Galvanised , 20 Mm Ø Nipple Double Ci Galvanised , 25 Mm Ø Nipple Double Ci Galvanised , 32 Mm Ø Nipple Double Ci Galvanised , 40 Mm Ø Nipple Double Ci Galvanised , 50 Mm Ø Nipple Double Ci Galvanised , 15 Mm Ø Union Coupling Ci Galvanised , 20 Mm Ø Union Coupling Ci Galvanised , 25 Mm Ø Union Coupling Ci Galvanised , 32 Mm Ø Union Coupling Ci Galvanised , 40 Mm Ø Union Coupling Ci Galvanised , 50 Mm Ø Union Coupling Ci Galvanised , 15X20 Mm Ø Coupling Reducing Ci Galvanised , 25X15 Mm Ø Coupling Reducing Ci Galvanised , 25X20 Mm Ø Coupling Reducing Ci Galvanised , 32X15 Mm Ø Coupling Reducing Ci Galvanised , 32X20 Mm Ø Coupling Reducing Ci Galvanised , 32X25 Mm Ø Coupling Reducing Ci Galvanised , 40X15 Mm Ø Coupling Reducing Ci Galvanised , 40X20 Mm Ø Coupling Reducing Ci Galvanised , 40X25 Mm Ø Coupling Reducing Ci Galvanised , 40X32 Mm Ø Coupling Reducing Ci Galvanised , 50X20 Mm Ø Coupling Reducing Ci Galvanised , 50X25 Mm Ø Coupling Reducing Ci Galvanised , 20X15 Mm Ø Elbow Reducing Ci Galvanised , 25X15 Mm Ø Elbow Reducing Ci Galvanised , 25X20 Mm Ø Elbow Reducing Ci Galvanised , G.I. Pipe Heavy 15 Mm, Is:1239 Of 1990 , G.I. Pipe Heavy 20 Mm, Is:1239 Of 1990 , G.I. Pipe Heavy 25 Mm, Is:1239 Of 1990 , G.I. Pipe Heavy 32 Mm, Is:1239 Of 1990 , G.I. Pipe Heavy 40 Mm, Is:1239 Of 1990 , G.I. Pipe Heavy 50 Mm, Is:1239 Of 1990 , Hammer Steel Ball Pane 500 Gms , Hammer Steel Ball Pane 1 Kg , Pipe Wrench G-250Is4003 , Pipe Wrench G-300Is4003 , Pipe Wrench G-350Is4003 , Hack Saw Blade High Speed 300 Mm , Tee Reducing Ci Galvanised 20 X 15 Mm , Tee Reducing Ci Galvanised 25 X 15 Mm , Tee Reducing Ci Galvanised 25 X 20 Mm , Tee Reducing Ci Galvanised 32 X 15 Mm , Tee Reducing Ci Galvanised 40 X 32 Mm , Deal Wood 50 Mm X 50 Mm , Deal Wood 76.2 Mm X 76.2 Mm , Deal Wood 100 Mm X 100 Mm , Deal Wood 152.4 Mm X 152.4 Mm , Deal Wood 203 Mm X 203 Mm , Deal Wood 254 Mm X 254 Mm , Deal Wood 304.8 Mm X 304.8 Mm , Yarn Spun Soft 18 Ply , Plug Wooden 15 Mm , Plug Wooden 20 Mm , Plug Wooden 25 Mm , Plug Wooden 32 Mm , Plug Wooden 40 Mm , Plug Wooden 50 Mm , Plug Wooden 65 Mm , Plug Wooden 80 Mm , Plug Wooden 100 Mm , Plug Wooden 150 Mm
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 51,333
Boards / Undertakings / PSU No of Bidders 9
Chhattisgarh View Result →
44.
Defence #11279247 AOC
Bids Are invited for Stationary Typewriting Carbon Paper , Register With Hard Cover 6Qr 320 Pages , Register With Hard Cover 5Qr 300 Pages , Register With Hard Cover 4Qr 250 Pages , Register With Hard Cover 3Qr 200 Pages , Register With Hard Cover 2Qr 150 Pages , Register With Hard Cover 1Qr 100 Pages , Envelope Se-07 Pt 229X324mm , Envelope Se-07 Cloth Lined 229X324mm , Envelope Se-08 Pt 324X458mm , Envelope Se-08A Cloth Lined 324X458mm , Exercise Book Wide Ruled , File Board 35.5 X 23 Cms , File Band With Binding Cloth With Thread , Scribing Pad Spiral Type Of 100 Pages , Self-Stick Pad , Plain Photo Copier Paper A4 75 Gsm , Plain Photo Copier Paper A4 80 Gsm , Plain Photo Copier Paper A3 75 Gsm , Pencil Black Good Quality Hb , Ball Pen , Paper Pin T Shape , Scissors Ss 20 Cms Long , Gum Bottle Liquid 150 Ml , Bleached Cotton Yarn Tags , Tag Cotton 17.5 Cm , Waste Paper Basket- Dustbin With Pedal , Synthetic Gum Tube , Glue Stick , Correcting Pen Roller Tip , Sketch Pen , Stapler Machine No. 10 , Stapler Machine No. 24 , Staple Pins For Machine No. 10 , Staple Pins For Machine No. 24 , Paper Clip Gem Pattern Plastic Coated , Cello Tape 48 Mm , Plastic Signature Folder , File Cover Made Of Pulp Board With Clip , File Cover With Printing , Pin Box, Fitted With Magnet , Highlighter Pen , Gel Pen Executive Officers , Gel Pen Clerk , Punching Machine Double Hole , Punching Machine Single Hole , While Board Marker Pen , File Channel A4 Size , Eraser , Calculator Led Big Size With Multiple Lines , Envelope Se-5 Plain 105X 230 Cms , Envelope Se-5 Cloth Lined 105X 230 Cms , Sharpener Total Quantity : 18762
Contract Date: Ref. Documents Contract Value : 3.18 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 14
Maharashtra View Result →
45.
Defence #11270948 AOC
Bids Are invited for Mta Store Bib Tap Pvc Make Prayag Seiko Kingston , Led Tube Light 20W 4 Feet Havells Bajaj Surya , Led Tube Light 10W 2 Feet Havells Bajaj Surya , Led Bulb 8W Havells Bajaj Surya , Wiremesh Cloth 0.56Mm , Ceiling Fan 1200Mm Sweep , Mcb Db Sheet Metal Enclosure 8 Way Make Philips Crompton Greaves Havells , Mcb Spn 40 S Make Philips Crompton Greaves Havells , Mcb Sp 05 To 30 S Make Philips Crompton Greaves Havells , Switch 5 S One Way Flush Button Piano Make Anchor Havells Finolex , Switch Socket Combination Modular Type 15 S 6 Pin Make Anchor Havells Finolex , Switch Socket Combination 5 S Pin Pvc Box Mounted Make Anchor Havells Finolex , Ceiling Rose , Pvc Square Box 3X3 Inch , Pvc Copper Cable Insulated Multi Strands 1.5 Sq Mm Make Anchor Havells Finolex , Pvc Copper Cable Insulated Multi Strands 2.5 Sq Mm Make Anchor Havells Finolex , Pvc Copper Cable Insulated Multi Strands 1.00 Sq Mm Make Anchor Havells Finolex , Rectangular Hollow Steel Column Section Of Size 66 X 33 X 2.90 Mm , Pvc Flexible Waste Pipe Of 32Mm Dia Wash Basin Urinal , Hdpe Water Tank 1000 Ltrs Make Sintex Js Polyplast Polycon , Exhasut Fan 300 Mm Pvc Body Make Philips Crompton Orient Bajaj Havells , Looking Mirror Size 450X600mm , T Grid False Ceiling 10 Feet Long , Ceiling Aluminium Grid 2 Feet Long , Ceiling Binding Wire , Ceiling L Patti 10 Feet Long , Black Star Screw , Ceiling Cement Bonded Board 2X2 Feet , External Type 12 Watt Led Light Complete Make Bajaj Philips Crompton Greaves Havells , Pvc Flushing Cistern 10 Ltrs Capacity With Complete Fitting To Wc Make Hindware Parryware Cera , Pillar Tap Pvc 15Mm Dia Make Prayag Seiko Kingston , Casing Capping 25Mm 10 Feet , Insulation Tape , 0.50Mm Th Ppgl Roofing Sheet 17X3.50 Feet Length , 0.50Mm Th Ppgl Roofing Sheet 10X3.50 Feet Length , Tapping Screw 3 Inch , Cement Opc 53 Grade , Sand Coarse , 20Mm Stone Aggregate , Cpvc Fta 20X15 Mm Brass Inner Thread , Cpvc Pipes 20 Mm Outer Dia Sdr 11 Make Supreme Finolex Prince , Cpvc Pipes 25 Mm Outer Dia Sdr 11 Make Supreme Finolex Prince , Pvc Coonection Pipe 450 Mm , Pvc Angle Cock 15 Mm Dia Make Prayag , Pvc Bib Cock 15 Mm Dia Make Prayag , Pvc Piller Cock Long Nose Make Prayag , Waste Pipe For Urinal , Cpvc Solution Adhesive 100 Ml , Cl S For Cpvc Pipes 20 Mm Dia , Cpvc Reducer T 50 X 25 Mm , Cpvc Elbow 25Mm Dia Make Supreme Finolex Prince , Cpvc Union 25Mm Dia Make Supreme Finolex Prince , Cpvc Stop Cock 25Mm Dia , Cpvc Tank Connector 25 Mm Dia , Thread Yarn , Thread Sealent Safeda , Tapelon Tape , Cpvc Reducer T 25 X 20 Mm , Cpvc Fta 25X20 Mm Brass Inner Thread , Cpvc Reducer Socket 25 X 20 Mm , Float Valve Assembly 20Mm Dia Complete Make Prayag Agrotech Shakti , Pvc Pipe 110Mm Dia Make Finolex Supreme Prince , Pvc T 110Mm Dia Make Finolex Supreme Prince , Pvc Elbow 110Mm Dia Make Finolex Supreme Prince , Pvc Socket 110Mm Dia Make Finolex Supreme Prince , Ceiling Fan Capacitor , Ss Comb Mod 15 A 6 Pin With Pvc M Box , Ss Comb Mod Type 5 5 Pin Pvc M Box , Switch 5 One Way Modular , Curtain Rods With 25Mm Dia For Door And Windows Coupler Plug Ss Brackets Knob Complete , Butt Hinges 100Mm , Pvc Pipes 15 Mm Dia Make Supreme Finolex Prince , Pvc Reducer 20 X 15 Mm Dia Make Supreme Finolex Prince , Aluminium Sliding Door Bolt 250 Mm Length , Aluminium Tower Bolt 150 Mm Length , Casing Capping 25Mm 10 Feet , Tank Connector 15 Mm Dia , Pvc Fta 15 Mm Dia , Float Valve Assembly 15Mm Dia Complete Make Prayag Agrotech Shakti , Synthetic Enamel Paint White Total Quantity : 4744
Contract Date: Ref. Documents Contract Value : 8.01 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Contract Date: Ref. Documents Contract Value : 26,000
Government Departments No of Bidders 20
Contract Date: Ref. Documents Contract Value : 35,955
Boards / Undertakings / PSU No of Bidders 9
Chhattisgarh View Result →
Contract Date: Ref. Documents Contract Value : 2.30 Lakh
Boards / Undertakings / PSU No of Bidders 9
Uttar Pradesh View Result →
49.
Defence #11261051 AOC
Bids Are Invited For H9 Knd Niv Tamt 160 Taflon Tape , K7 4210-0000023 Charger Fire Ext Cd Water Type 9 Ltr , G1 5315- 000817 Nails Steel Wire Round 50 Mm X 2.8 Mm , H1 B 5350-000007 Abrasive Cloabrasive Cloth Emery , G1 5315-000824 Nails Steel Wire Round 75 Mm X 2.8 Mm , G1 5315-000658 Nails Steel Wire Round 45 Mm X 2.5 Mm , H1 5350-000223 Abrasive Paper Emery Or Corundum Is Grit , H1 5350-000224 Abrasive Paper Emery Or Corundum Is Grit , H1 B1 5350-000010 Abrasive Cloth Glass Is Grit 180 Size Of , H1 B 5350- 000004 Abrasive Cloth Emery Or Corundum Size , H1 B 5350-000050 Abrasive Paper Emery Or Corundum Size , H1 B 6810-000010 Acid Hydrochloric Technical , H1 B 6810-000014 Acid Sulphuric Pure , H1B 9160- 000015 Bees Wax , H1 B 6810-000568 Blue Laundry , H2 8305-000064 Cotton Waste Coloured , H1B 5350- 000011 Abrasive Cloth Glass 150 Size Of , H1B 8040- 000020 Adhesive Synthetic Resin Hardner Hy , G2 9525-000066 Wire Copper Hard 1.00 Mm , F1 5110- 000289 Blade Hand Hacksaw , G1 5320-000334 Rivet Snap Head Copper 8Mmx20Mm , G1 5305-002713 Screw Wood Slotted Csk Head Mild Steel N , G1 5310- 001411 Washers Spring Single Coil Type B Stee , G1 5315-000064 Pins Cotter Split Steel 1.6 Mm X 25 Mm , G15310 001412 Esh Spg Sc Ty Stl Ns 8 Mm , G1 5305- 002681 Screw Wood Slotted Csk Head Mild Steel N , G1 5315-00094 Pins Cotter Split Steel 5.0 Mm X 80 Mm , G1 5315-000080 Pin Cotter Split 3X32Mm , G2 9505- 000059 Wire Steel Mild Galvanised 0.56 Mm , G2 9525- 000069 Wire Copper Soft For General Purposes , G2 9525-000070 Wire Copper Soft For Gen Purp 0.80 Mm , H2 4020-000195 Casd Twine Jute , H1 5350-000026 Abrasive Paper Emery Or Corundum Is Grit , H1 5350- 000028 Abrasive Paper Emery Or Corundum Is Grit , H1B 8030-000059 Chalk Frenchtechnical , H1B 5350- 000025 Abrasive Paper Emery Or Corundum , H1B 5350-000012 Abrasive Cloth Glass Is Grit 50 Size Of , H1B 5350-000009 Abrasives Cloth Emery Or Corundum , H2 4020-000219 Spurn Yarn Hemp Tarred White 5 Yarn , H3 5530-400066 Plywood General Purpose Wwr-Ab- Ply 240 , H9 5330-001909 Jointing Asb F Comp Gr 3 2Mm Thick , H9 5640-000005 Asbestos Mill Board 3.2Mm , G1 5305-002549 Screws Wood Slotted Csk Hd Brass No 8X , G1 5310-00193 Wsh Spg Dc Stl Phos Ns M8 , G1 5315-000070 Pins Cotter Split Steel 2.0Mm X 25Mm , G1 5310-000573 Nut Metric Precision Steel 8 Hexagon M24 , G1 5320-000290 Rivets Snap Head Copper Dia 3 X20Mm , G1 5315- 000820 Nails Steel Wire Round 70Mm X 2.5Mm , G2 9530-0000058 Leaded Brass Rod Square 60.00Mm , H2 8305-000084-Casd Muslin White Bleached , G1 5310- 001414 Wsg Sog Sc Ty B Stl 12Mm , G2 3439-000085 Electrodes Welding Aluminium 3 15Mm , H1B 6850- 000084 Inhibitor Auto Rust And Scale , G2 9505- 000049 Wire Steel Spring Soft 0.50Mm , H2 8305- 000065 Cotton Waste White , Y3 6145-000012 Cable Electric Atc 10Mm 2 Elastomer Ins , Y3 6145-007419 Cable Power Electrical Flexible Tinned , Y3 6145- 007416 Cable Power Electrical Tinned Annealed , Z7 5855-000610 Cell Dummy 46.0Mm Long Od 14 5Mm Id , G2 9505-000062 Wire Steel Mild Galvanised 1 60Mm Total Quantity : 14303
Contract Date: Ref. Documents Contract Value : 8.49 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
50.
Public Administrative Department #11258237 AOC
Tender For Hand pump Maintenance Items - Handpump Link Rod Isi Mark 10 Feet Long 12 Mm , Handpump Headbox Isi Mark , Handpump Head Lid Isi Mark , Handpump Handle Isi Mark , Handpump Water Chamber Isi Mark , Handpump Nat Bolt 3.5 Yarn Isi Mark , Handpump Foundation Head Isi Mark , Handpump Chain Isi Mark , Handpump Barring Isi Mark , Handpump Plunger Valve Isi Mark , Handpump Plunger Valve Ring Isi Mark , Socket Gi 11/4 Inch Heavy , Handpump Plate Isi Mark , Handpump Guide Valve Brass Metal Complete Isi Mark , Handpump Planger Assembly Complete Brass Metal Wih 3 Wisor Isi Mark , Handpump Leather Wiser Isi Mark , Handpump Noylock Bucket Isi Mark , Handpump Guide Valve Ring Isi Mark , Handpump Caplor Isi Mark , Handpump Rod Socket Isi Mark , Handpump Chain Bolt Isi Mark , Handpump Handle Swing Isi Mark , Handpump Deepwell Cylinder Brass Metal Complete With 3 Visor Isi Mark , Handpump Caplor Ring Isi Mark , Handpump Cylinder Cover Isi Mark , P.V.C. Water Tank 500Liter 4 Core Isi Mark , P.V.C. Water Tank 750Liter 4 Core Isi Mark , P.V.C. Water Tank 1000Liter 4 Core Isi Mark , P.V.C. Water Tank 2000Liter 4 Core Isi Mark , P.V.C. Water Tank 300 Liter 4 Core Isi Mark , P.V.C. Water Tank 300Liter 3 Core Isi Mark , P.V.C. Water Tank 500Liter 3 Core Isi Mark , P.V.C. Water Tank 750Liter 3 Core Isi Mark , P.V.C. Water Tank 1000Liter 3 Core Isi Mark , P.V.C. Water Tank 2000Liter 3 Core Isi Mark , Gi Pipe 32Mm 10 Feet Long B Class Isi Mark , Plunger Valve Ring Isi Mark , Deepwell Cylinder Blanck Isi Mark , Handpump Excel Isi Mark , Handpump Lifter Pana
Contract Date: Jun 09, 2026 Contract Value : 15.00 Lakh
Local Bodies No of Bidders 4
Madhya Pradesh View Result →
TenderDetail
Loading tenders