View Bid Results For Water Treatment Consumables Tenders

We found 406 Bid Results related to water treatment consumables tenders. You can find Contractor details who won water treatment consumables tenders along with contract details in Bid awards announcements section.

Indian Tenders
12
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
4
Live Opportunities Worldwide
Filters
Stage
330
46
30
Tender Publishing Platform
50
356
State / UT
28
152
30
27
22
21
20
18
16
13
12
8
8
7
7
7
6
6
5
5
4
3
2
2
1
1
1
1
1
Contract Value
147
50
120
85
Publish Date
1
0
0
0
0
Sector
27
103
66
52
36
35
21
20
15
10
7
6
5
5
4
4
3
3
2
1
1
1
1
1
1
1
1
1
Ownership
6
229
84
54
34
4
1
Within keyword
Active filters:
Showing 1–9 of 406 tenders matching your filters
Uttar Pradesh View Result →
2.
Educational and Research Institute #11318501 Technical Bid
Rate Contract For Supply Of Consumables/Non-Consumables For The Department Of Plastic Surgery , Consumables , Adhesive Hydrocellular Foam Dressing - Size: 12.5 Cm X 12.5 Cm , Adhesive Hydrocellular Foam Sacrum Dressing - Size: 17 Cm X 17 Cm , Adhesion Barrier Film Which Is Translucent And Hydrophilic Adhesion Barrier Made Of Sodium Hyaluronate And Carboxymethylcellulose - Size:5 Inx 6 In , Adhesion Barrier Film Which Is Translucent And Hydrophilic Adhesion Barrier Made Of Sodium Hyaluronate And Carboxymethylcellulose - Size:3 Inx5 In , Barrier Foam Dressing (Sterile) 10Cm X 10Cm , Barrier Gauze Dressing (Sterile) , Centella Asiatica, Silver Oxide And Silk Powder - 50Gm , Centella Asiatica, Silver Oxide And Silk Ointment - 25Gm , Centrifuge Tubes Polypropylene Cap (Sterile) - 15 Ml , Chlorhexidine Gauze Dressing Size 10 X 10Cm , Chlorhexidine Gauze Dressing Size 10 X 30Cm , Cockup Splint , Colloidal Silver Solution - Pre-Cleaning Solution Containing Colloidal Silver - 60 Ml , Compression Bandage , Cotton Crepe Bandage Size - 10Cm X 4M , Cotton Crepe Bandage Size - 15Cm X 4M , Fiber Glass Cast Tape For Limb Splint - Size: 7.5Cm , Fiber Glass Cast Tape For Limb Splint - Size: 10Cm , Fiber Glass Cast Tape For Limb Splint - Size: 15Cm , Finger Splint , G Bone(Modified Hydroxyapatite Granules And Blocks) , Gentamicin In Collagen Base Gel For Wound Healing - 30Gm , Hemostat To Stop Bleeding For Arterial Haemorrhages Comprised Of Agar And Bovine Factor Proteins (Iia, Viia, Xia And Xa) And Acts As A Catalyst In The Clot Formation Process - Pack Size 3Ml Vial , Ionic Silver Solution , Kaolin Impregnated X-Ray Detectable Hemostatic Dressing -Size:10 Cm X 10 Cm , Kaolin Impregnated Vaccum Packed Hemostatic Dressing -Size: 7.5 Cm X 3.7 M, X-Ray Detectable Strip , Kaolin Impregnated Ems Rolled Gauze Hemostatic Dressing -Size:7.5 Cm X 1.2 M , Low Adherent, Absorbent Wound Dressing - Size: 10Cm X 10Cm , Leur Lock Syringe (Disposable) - 2 Ml , Leur Lock Syringe (Disposable) - 5 Ml , Leur Lock Syringe (Disposable) - 20 Ml , Multi-Layered Design Incorporating Hydrocellular Foam With Hyper-Absorbent Lock Away Core Having Five Layers Comprising Of Masking Layer, Silicon Layer,And Polyurethane Breathable Top-Size: 12.9 X 12.9 Cm , Multi-Layered Design Incorporating Hydrocellular Foam With Hyper-Absorbent Lock Away Core Having Five Layers Comprising Of Masking Layer, Silicon Layer,And Polyurethane Breathable Top- Size: 15.4 X 15.4 Cm , Non Adhesive Hydrocellular Foam Dressing - Size: 10Cm X 10Cm , Non-Woven Island Wound Dressing (Non Woven Adhesive Sheet With Absorbent Pad) Size 10Cm X 8Cm , Non-Woven Island Wound Dressing (Non Woven Adhesive Sheet With Absorbent Pad) Size 10Cm X 20Cm , Non-Woven Island Wound Dressing (Non Woven Adhesive Sheet With Absorbent Pad) Size15cm X 8Cm , Orthopaedic Cast Padding-Size 10Cm X 3M , Orthopaedic Cast Padding-Size 15Cm X 3M , Oxidized Regenerated Cellulose, Bactericidal By Ph Action, Absorbable Topicalhemostat - Standard Size: 2 X 3. Approved By Ce , Oxidized Regenerated Cellulose, Bactericidal By Ph Action, Absorbable Topicalhemostat -Size 1 X 2 Fibrillar Form. Approved By Ce , Oxidized Regenerated Cellulose, Bactericidal By Ph Action, Absorbable Topicalhemostat -Size 1 X 1 Woven Form. Approved By Ce , Paraffin Gauze Dressingsize 10 X 10Cm , Paraffin Gauze Dressingsize 15 Cm X 2M , Polyester Wound Contact Layer With Central Cotton Absorbent Layer And Out Hydrophobic Non-Woven Layer. Low Adherent, Absorbent Wound Dressing -Size: 10 Cm X 10 Cm , Polyester Wound Contact Layer With Central Cotton Absorbent Layer And Out Hydrophobic Non-Woven Layer. Low Adherent, Absorbent Wound Dressing -Size: 10 Cm X 20 Cm , Polyester Wound Contact Layer With Central Cotton Absorbent Layer And Out Hydrophobic Non-Woven Layer. Low Adherent, Absorbent Wound Dressing-Size: 50 Cm X 7 Mtr Roll (Unsterile) , Pre-Cut Synthetic Splint System -Size: 10 X 40Cm , Pre-Cut Synthetic Splint System -Size: 12.5 X 76Cm , Pure Type I Bovine Collagen Particles , Rae Endotracheal Tubes (Oral Curved) (Pvc) Cuffed -Size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5 (Set Of All Sizes) (50 Sets) , Rae Endotracheal Tubes (Oral Curved) (Pvc) Non Cuffed - Size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5(Set Of All Sizes) (50 Sets) , Rae Endotracheal Tubes (Oral Curved) (Pvc) Cuffed -Size 6.0, 6.5, 7, 7.5 (Set Of All Sizes) (50 Sets) , Rae Endotracheal Tubes (Oral Curved) (Pvc) Noncuffed - Size 6.0, 6.5, 7, 7.5 (Set Of All Sizes) (50 Sets) , Recombiant Human Epidermal Growth Factor 150Ug/G Gel , Recombiant Human Epidermal Growth Factor 60Ug/G Gel , Silicone Gel In Tubes For Scar Treatment - 10Gm , Sterile Dehydrated Human Amnion Chorion And Polyhexamethylene Biguanide Powder (6Gm) , Sterile Dehydrated Human Umbilical Cord Derived Membrane Allograft-Size:5Cm X 3Cm , Sterile Dehydrated Human Amnion Chorion Membrane With Polyhexamethylene Biguanide- Size: 7Cm X 7Cm , Sterile Dehydrated Human Amnion Chorion Membrane With Polyhexamethylene Biguanide- Size:11M X 7Cm , Skin Marking Pen , Staple Remover , Temporary Biosynthetic Skin Dressingconstructed Of A Silicone Film Bonded To A Cross-Linked Dermal Collagen Coated Nylon Fabric-Size:13 X 13 Cm , Transparent Adhesive Dressing -Size: 60 X 45Cm , Type I Collagen Particles With Mupirocin Ip 2% W/W And Metronidazoleip 1% W/W , Universal Laser Eye Safety Goggles , Varicose Vein Stockings , Wd 40 Lubricant , Pla Reel 1Kg For 3D Printer Medical Grade , Arch Bar For Dental Reconstruction (German Silver/Stainless Steel) , External Fixator Set For Fingers , Hunters Rod (Silicon Rods) For Tendon Repairs , Silicon Block , Tendon Spacer , Nasalimplantdorsal , Chin Implant Adjustable , Cheek Implant (Zygomatic)Left , Cheek Implant (Zygomatic)Right , Round Loop Electrode For Radio Frequency Surgery - Fine Wire , Round Loop Electrode For Radio Frequency Surgery - Regular Wire , Triangularloop Electrode For Radio Frequency Surgery - Fine Wire , Triangular Loop Electrode For Radio Frequency Surgery - Regularwire , Needle Electrode For Radio Frequency Surgery - Fine Wire , Needle Electrode For Radio Frequency Surgery - Superfine Wire , Needle Electrode For Radio Frequency Surgery - Regular Wire , Bipolar Forceps Straight Compatible For Alan And Erbe Diathermy Machinesize 6- 0.2 Mm , Bipolar Forceps Straight Compatible For Alan And Erbe Diathermy Machinesize5 - 0.1 Mm , Bipolar Non-Stick Angled Forceps Compatible For Alan And Erbe Diathermy Machine Size 6 - 0.2 Mm , Bipolar Non-Stick Forceps 4 Fine Tip (1Mm) Compatible For Alan And Erbediathermy Machine , Bipolar Connecting Cable, Vio, Icc, Acc (2-Pin 22 Mm), 4 M For Bipolar Forceps With European Flat Plugcompatible For Alan And Erbe Diathermy , Cable For Bipolar Forceps Compatible For Alan And Erbe , Disposable Adult Patient Plate Compatible For Alan And Erbe Diathermypediatric , Disposable Handswitch Pencil For Monopolar Diathermy Compatible With Alan And Erbe Models , Disposable Neutral Plate - Adult , Disposable Neutral Plate - Pediatric , Ellman Company Radio Frequency Cable , Ellman Company Radio Frequency Plate , Spatula Electrode Compatible For Alan And Erbe Diathermy , Silicon Cord For Insulated Bipolar Forceps (Autoclavable) , Surgical Gloves: Polyurethane Inner Coating With Textured External Surface And Dark Coloured To Prevent Reflective Glare. Internal Surface Should Have Powder Free, Polymer Coated Siliconated. Size : 7.5 , Surgical Gloves: Polyurethane Inner Coating With Textured External Surface And Dark Coloured To Prevent Reflective Glare. Internal Surface Should Have Powder Free, Polymer Coated Siliconated. Size : 7 , Surgical Gloves: Polyurethane Inner Coating With Textured External Surface And Dark Coloured To Prevent Reflective Glare. Internal Surface Should Have Powder Free, Polymer Coated Siliconated. Size : 6.5 , Eutatic Mixture Of Local Anesthetic (Prilocain + Lignocain) Tubes , Beaver Needle Blade 1.5 Mm Cutting Edge, 3 Per Box , Bd Beaver Mini - Blade Knife- Straight, Sharp All Around 180° Cutting Surface, Double Level Blade , Beaver Mini-Blade Angled 60°, Sharp All Around 180° Cutting Surface, Double Level Blade , Multi Fire Vascular Clip Applicator For Liga Clip (5 Mm) , Cramer Wire - Small2 , Cramer Wire - Medium 3 , Cramer Wire - Large 4 , Cramer Wire- Extra Large 6 , Thermoplastic Perforated Sheet For Preparing Malleable And Strong Splint Size:45Cm X 60Cm X 5 Mm Thickness , Hydrojet Cannula , Dr. Lite Bulb Holder , Bulb 24 V 150 W , Ear Suction Canula (Luer Lock Fitting Blunt Point) With Connector16 G, 17 G& 18 G , Wound Protector / Retractor Device 2-4 Cms , Wound Protector / Retractor Device 2.5-6 Cms , Wound Protector / Retractor Device 5-9 Cms , Alar Retractor , Bone Marrow Aspiration Cannula 16 Gauge , Liposuction Tubings With Adaptor Suitable For Liposuction Model Infusa Plus , Paediatric Cuff For Zimmer Tourniquet Size 8 , Paediatric Cuff For Zimmer Tourniquet Size 12 , Ear Tip For Impedence Suitable For Gsi 38 Auto Tymp , Colorado Needles– 76Mm + 10Mm Tip Length , Colorado Needles– 76Mm + 10Mm Tip + 3Mm 45° Uninsulated Tip Length , Colorado Needles– 178Mm + 10Mm Tip + 3Mm 45° Uninsulated Tip Length , Colorado Micro Dissection Needles –3 Cm Straight (3/32 Sleeve) , Nano Crystaline Silver Gel 0.002% W/W , Hair Growth Serum - 60 Ml , Synthetic Biodegradable Temporizing Tri-Layered Open Cell Foam Matrix Made From Biodegradable Polyurethane. Converts Macro Wounds Into Organised Micro Wounds. Regenerates Neodermis And Neovascularization. Size: 5X5 Cm , Synthetic Biodegradable Temporizing Tri-Layered Open Cell Foam Matrix Made From Biodegradable Polyurethane. Converts Macro Wounds Into Organised Micro Wounds. Regenerates Neodermis And Neovascularization. Size: 10X10 Cm , Synthetic Biodegradable Temporizing Tri-Layered Open Cell Foam Matrix Made From Biodegradable Polyurethane. Converts Macro Wounds Into Organised Micro Wounds. Regenerates Neodermis And Neovascularization. Size: 10X20 Cm , Synthetic Biodegradable Temporizing Tri-Layered Open Cell Foam Matrix Made From Biodegradable Polyurethane. Converts Macro Wounds Into Organised Micro Wounds. Regenerates Neodermis And Neovascularization. Size: 20X40 Cm , Aqua Spray Aerosol ( With Bag-On-Valve Technology) For Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate And Sodium Chloride And Purified Water 95.85%. Delivery Mechanism Is Continous Aerosol Creating & Emptying 100% Of Product From Container With No Contamination - 50 Gm , Aqua Spray Aerosol ( With Bag-On-Valve Technology) For Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate And Sodium Chloride And Purified Water 95.85%. Delivery Mechanism Is Continous Aerosol Creating & Emptying 100% Of Product From Container With No Contamination - 100 Gm , Dressing Impregnated With Electrochemically Solutionreleasing Active Chlorine Released From Hypochlorous Acid 0.003% At 100 Ppm And Sodium Hypochlorite Solution With Neutral Ph, Non-Toxic, Human Skin Friendly Madefor Bactericidal, Fungicidal Action, Ce Certified & Fda Approved. Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% & Gauze - Size 10* 10 Cm , Electrochemical Solution Releasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 100 Ml Spray , Electrochemical Solution Releasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 250 Ml Spray , Electrochemical Solutionreleasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 250 Ml Cap Bottle , Electrochemical Solution Releasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 500 Ml Cap Bottle , Electrochemical Solutionreleasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 1000Ml Cap Bottle , Electrochemical Solutionreleasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation -500 Ml Irrigation Bag With Closed System (Self Collapsible & 2 Ports For Withdrawal One For Iv Set & 1 For Needle Withdrawal) , Electrochemical Solution Releasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 1000 Ml Irrigation Bag With Closed System (Self Collapsible & 2 Ports For Withdrawal One For Iv Set & 1 For Needle Withdrawal) , Wound Care Gel Tube For Moistening And Debridement Of Acute And Chronic Wounds Such As Stage I-Iv Ulcers, Venous Stasis And Diabetic Ulcerations, Post-Surgery Wounds And Bed Soresfor Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate-(4%) And Sodium Chloride And Purified Water 95.85% -15 Gm Gel Tube , Wound Care Gel Tube For Moistening And Debridement Of Acute And Chronic Wounds Such As Stage I-Iv Ulcers, Venous Stasis And Diabetic Ulcerations, Post-Surgery Wounds And Bed Sores For Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate-(4%) And Sodium Chloride And Purified Water 95.85% -30 Gm Gel Tube , Wound Care Gel Tube For Moistening And Debridement Of Acute And Chronic Wounds Such As Stage I-Iv Ulcers, Venous Stasis And Diabetic Ulcerations, Post-Surgery Wounds And Bed Sores For Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate-(4%) And Sodium Chloride And Purified Water 95.85%-50 Gm Gel Tube , Wound Care Gel Tube For Moistening And Debridement Of Acute And Chronic Wounds Such As Stage I-Iv Ulcers, Venous Stasis And Diabetic Ulcerations, Post-Surgery Wounds And Bed Soresfor Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate-(4%) And Sodium Chloride And Purified Water 95.85%-100 Gm Gel Tube , Highly Absorbent Polyurethane Foam Dressing With Soft And Gentle Skin Friendly Silicone Adhesive For Moderate To Highly Exuding Wounds, Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Superior Absorption, Waterproof And Bacteria Proof Semi-Permeable Polyurethane Top Film. Size:7.5X7.5 Cm , Highly Absorbent Polyurethane Foam Dressing With Soft And Gentle Skin Friendly Silicone Adhesive For Moderate To Highly Exuding Wounds, Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Superior Absorption, Waterproof And Bacteria Proof Semi-Permeable Polyurethane Top Film. Size:10X10 Cm , Highly Absorbent Polyurethane Foam Dressing With Soft And Gentle Skin Friendly Silicone Adhesive For Moderate To Highly Exuding Wounds, Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Superior Absorption, Waterproof And Bacteria Proof Semi-Permeable Polyurethane Top Film. Size:12.5X12.5 Cm , Soft And Gentle Silicone Adhesive With Antimicrobial Properties, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteria Proof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size:7.5X7.5 Cm , Soft And Gentle Silicone Adhesive With Antimicrobial Properties, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteria Proof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size:10X10 Cm , Soft And Gentle Silicone Adhesive With Antimicrobial Properties, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteria Proof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size: 12.5X12.5 Cm , Thin, Ultra Flexible And Absorbent Polyurethane Foam Dressing With A Semi-Permeable, Bacteria- And Waterproof Top Film And A Soft Silicone Adhesive Layer. Unique 3D Foam Structure Absorbs The Exudate Vertically And Locks The Fluid Away Within Its Structure,Leaving The Wound Moist For Optimal Wound Healing Conditions. The Soft And Thin Foam Pad At Skin Level Makes It Comfortable To Wear And Is Suited For Users That Need Increased Mobility.Size:5X5 Cm , Thin, Ultra Flexible And Absorbent Polyurethane Foam Dressing With A Semi-Permeable, Bacteria- And Waterproof Top Film And A Soft Silicone Adhesive Layer. Unique 3D Foam Structure Absorbs The Exudate Vertically And Locks The Fluid Away Within Its Structure,Leaving The Wound Moist For Optimal Wound Healing Conditions. The Soft And Thin Foam Pad At Skin Level Makes It Comfortable To Wear And Is Suited For Users That Need Increased Mobility.Size:7.5X7.5 Cm , Thin, Ultra Flexible And Absorbent Polyurethane Foam Dressing With A Semi-Permeable, Bacteria- And Waterproof Top Film And A Soft Silicone Adhesive Layer. Unique 3D Foam Structure Absorbs The Exudate Vertically And Locks The Fluid Away Within Its Structure,Leaving The Wound Moist For Optimal Wound Healing Conditions. The Soft And Thin Foam Pad At Skin Level Makes It Comfortable To Wear And Is Suited For Users That Need Increased Mobility.Size:12.5X12.5Cm , Non Adhesive Antimicrobial, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteriaproof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size:10X20cm , Non Adhesive Antimicrobial, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteriaproof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size:20X20cm , Calcium Alginate Dressing With 65-75 % Guluronic Acid, Unique Structure Of Calcium Alginate And Cmc Molecules Intertwined In Strings Resulting In Local Vertical Absorption. For Managing Sloughy Wounds With Cavity.Size:3X44cm Ribbon Cavity , Calcium Alginate Dressing With A Unique Structure Of Calcium Alginate And Cmc Molecules Intertwined In Strings Resulting In Local Vertical Absorption And Gel Formation. 5.7%- 6.3% Sodium Zirconium Crystals Contains Silver Which Provide Broad And Continuous Antibacterial Profile For Upto 7 Days And Prevents Microbial Colonisation. For Managing Infected Sloughy Wounds With Cavity And Various Shapes, Sizes And Depths. Comes With Spin Finish To Prevent Fibre Shredding And Has Document Haemostatic Effect.Size:10X10 Cm , Calcium Alginate Dressing With A Unique Structure Of Calcium Alginate And Cmc Molecules Intertwined In Strings Resulting In Local Vertical Absorption And Gel Formation. 5.7%- 6.3% Sodium Zirconium Crystals Contains Silver Which Provide Broad And Continuous Antibacterial Profile For Upto 7 Days And Prevents Microbial Colonisation. For Managing Infected Sloughy Wounds With Cavity And Various Shapes, Sizes And Depths. Comes With Spin Finish To Prevent Fibre Shredding And Has Document Haemostatic Effect.Size:15X15cm , Hydrogel Consisting Of Natural Ingredients Such As Highly Purified Water, Sodium Carboxy-Methylcellulose And Calcium Alginate Without Any Additives. For Effective And Gentle Autolytic Debridement Of Necrotic Tissue, Dry And Sloughy Necrotic Wounds-15 Gm , Non-Invasive Skin Closure Strips With Sterile, Breathable, Non-Woven Rayon Backed Microporous Material Reinforced With Filaments For High Tensile Strength. Contains Hypoallergenic Adhesive To Reduce Skin Trauma. Dimension:12Mm X 100Mm (1/2 X 4 In)(Pack Of 50 Pcs) , Non-Invasive Skin Closure Strips With Sterile, Breathable, Non-Woven Rayon Backed Microporous Material Reinforced With Filaments For High Tensile Strength. Contains Hypoallergenic Adhesive To Reduce Skin Trauma. Dimension:6Mm X 100Mm (1/4 X 4 In) (Pack Of 50 Pcs) , Non-Invasive Skin Closure Strips With Sterile, Breathable, Non-Woven Rayon Backed Microporous Material Reinforced With Filaments For High Tensile Strength. Contains Hypoallergenic Adhesive To Reduce Skin Trauma. Dimension: 25Mm X 125Mm (1 X 5 In)(Pack Of 50 Pcs) , Sterile, Semipermeable, Transparent, Breathable, Water Proof, Bacterial And Viral Barrier Polyurethane Film (That Reduces Chance Of Infection) With Absorbent, Non-Adherent Pad (That Helps Reduce Trauma On Dressing Removal) And Latex Free Hypoallergenic Acrylic Adhesive That Is Gentle To Skin- Size: 9Cm X 10Cm (Pack Of 25 Pcs) , Sterile, Semipermeable, Transparent, Breathable, Water Proof, Bacterial And Viral Barrier Polyurethane Film (That Reduces Chance Of Infection) With Absorbent, Non-Adherent Pad (That Helps Reduce Trauma On Dressing Removal) And Latex Free Hypoallergenic Acrylic Adhesive That Is Gentle To Skin- Size:6Cm X 10Cm(Pack Of 50 Pcs) , Transparent, Semipermeable, Breathable, Water Proof, Bacterial And Viral Barrier, Synthetic Blood Penetration Resistance, Sterile, Polyurethane Film Peripheral Iv Dressing For Adults Reinforced With Soft Cloth Border And Notch. Non-Latex, Hypoallergenic Pattern Coated Acrylic Adhesive With 2 Large Extra Sterile Soft Cloth Tape Strips For Additional Securement And Complies With Iso-10993 Standards For Biocompatibility- Size: 6.5Cm X 7Cm (Pack Of 100 Pcs) , Silicone Gel Sheets For Scar Management - Size: 5 X5 Cm , Silicone Gel Sheets For Scar Management - Size: 10X10 Cm , Silicone Gel Sheets For Scar Management - Size: 20X20 Cm , Sterile Collagen Particles - 2.5Ml , Sterile Collagen Particles - 5Ml , Sterile Collagen Particles - 10Ml , Sterile Collagen Particles - 15Ml , Sterile Medicated Collagen Particles - 5Ml , Sterile Medicated Collagen Particles - 10 Ml , Sterile Medicated Collagen Particles - 15 Ml , Sterile Medicated Collagen Sheets In Dry Form Size: 10X10 Cm , Sterile Medicated Collagen Sheets In Dry Form Size: 10X20 Cm , Sterile Medicated Collagen Sheets In Dry Form Size: 15X30 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Wet Form - Size: 10X20 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Wet Form - Size: 15X30 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Dry Form - Size: 10X20cm , Collagen Sheets Pure Type 1&3 Triple Helical In Dry Form - Size: 15X30 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Meshed Form - Size: 10X20 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Meshed Form - Size: 15X30 Cm , Sterile Nano Oligosacchride Factor (Nosf) Foam Dressing With Border. Also Impreganted With Carboxy Methly Cellulose And Lipid Particles, Border - Size: 10 Cm X 10 Cm , Sterile Nano Oligosacchride Factor Foam (Nosf) Dressing With Border. Also Impreganted With Carboxy Methly Cellulose And Lipid Particles, Border- Size: 15 Cm X 20 Cm , Sterile Nano Oligosacchride Factor (Nosf) Contract Layer Dressing Impreganated Carboxy Methly Cellulose And Lipid Particles, Contact Layer - Size: 10 Cm X 10 Cm , Sterile Nano Oligosacchride Factor (Nosf) Contract Layer Dressing Impreganated Carboxy Methly Cellulose And Lipid Particles, Contact Layer - Size: 15 Cm X 20 Cm , Sterile Nano Oligosacchride Factor (Nosf) Micro Adhesive Dressingimpreganated Carboxy Methly Cellulose And Lipid Particles, Ma - Size: 10 Cm X 10 Cm , Sterile Nano Oligosacchride Factor (Nosf) Micro Adhesive Dressingimpreganated Carboxy Methly Cellulose And Lipid Particles, Ma - Size: 6 Cm X 6 Cm , Sterile Nano Oligosacchride Sucrose Factor ( Nosf) Healing Matrix, Micro Adhesive. Size 15Cmx 20Cm, European Ce Approved , Sterile Nano Oligosacchride Sucrose Factor ( Nosf) Healing Matrix, Micro Adhesive. Size 10Cmx 10Cm, European Ce Approved , Sterile Nano Oligosacchride Sucrose Factor ( Nosf) Healing Matrix, Micro Adhesive. Size 6Cmx 6Cm, European Ce Approved , Sterile Nano Oligosacchride Sucrose Factor ( Nosf) Healing Matrix, Contact Layer. Size 15 Cmx 20 Cm, European Ce Approved , Hyperoxygenated Glycerides Of Essestial Fatty Acid (Linoleic Acid 60%) With Tecopherol - 99% And Aniseed Pergume 1%, For Pressure Ulcer Prevention-Size 50 Ml , Hyperoxygenated Glycerides Of Essestial Fatty Acid (Linoleic Acid 60%) With Tecopherol - 99% And Aniseed Pergume 1%, For Pressure Ulcer Prevention-Size 20 Ml , Sterile Fish Collagen Type I Collagen Sponge -Size 10 X 10Cm , Occulusive Wound Dressing Non-Resorbable Which Contains Bio Cellulose 100%, Monolaurin 7%In A Sterile Pack-Size: 5 X 5 Cm , Occulusive Wound Dressing Non-Resorbable Which Contains Bio Cellulose 100%, Monolaurin 7%In A Sterile Pack-Size: 10 X 10 Cm , 2 Layer Polyurethane Ester Foam Dressings Size (11 X 8 X 1.8Cm) With Spiral Cut Sheet Use For Instillation (Not Irrigation), 1 Vac Instillation Trac Pad With 5 Lumen Tubing Set, 2 Sheets Of Vac Advanced Drape, 2 Packets Ofcavilon No Sting Barrier Film, 1 Disposable Ruler. With Cdsco And Fda & Ce Certified , 2 Layer Polyurethane Ester Foam Dressings Size (17 X 15 X 1.8Cm) With Spiral Cut Sheet Use For Instillation (Not Irrigation), 1 Vac Instillation Trac Pad Wit 5 Lumen Tubing Set, 2 Sheets Of Vac Advanced Drape, 2 Packets Ofcavilon No Sting Barrier Film,1 Disposable Ruler. With Cdsco And Fda & Ce Certified. , 2 Layer Polyurethane Ester Foam Dressings Size (25 X 15 X 1.6Cm) With Spiral Cut Sheet Use For Instillation (Not Irrigation), 1 Vac Instillation Trac Dual Pad With 5 Lumen Tubing Set, 5 Sheets Of Vac Advanced Drape, 4 Packets Ofcavilon No Sting Barrier Film,1 Disposable Ruler. With Cdsco And Fda & Ce Certified. , 3 Layer Foam Dressing Used For Instillation Therapy Size (25.6 X 15 X 0.8Cm, 25.6 X 15 X 1.6Cm, Contact Layer 25.6 X 15 X 0.8Cm W And 1Cm Circular Holes), 1 Vac Instillation Trac Pad With 5 Lumen Tubing Set, 4 Sheets Ofv.A.C. Advanced Drape, 4 Packets Ofcavilon No Sting Barrier Film,1 Disposable Ruler.With Cdsco And Fda & Ce Certified , 3 Layer Foam Dressings Used For Instillation Theraphy Size (25.6 X 15 X 0.8Cm, 25.6 X 15 X 1.6Cm, Contact Layer 25.6 X 15 X 0.8Cm And 1Cm Circular Holes), 1 Vac Instillation Trac Dual Pad With 5 Lumen Tubing Set, 6 Sheets Of Vac Advanced Drape,5 Packets Of Cavilon No Sting Barrier Film, 1 Disposable Ruler. With With Cdsco And Fda & Ce Certified , 500 Ml Canister (Sterile) Sensing Tracing Pad With 5 Lumen Tubing Set Prevent Leakage And Blockage, With Gel (Containing Sodium Polyacrylate To Covert Exudate Into Gel, So No Cross Contamination) And Clamp And Connector. With Cdsco And Fda & Ce Certified , 300 Ml Canister (Sterile) Sensing Trac Pad With 5 Lumen Tubing Prevent Leakage And Blockage, With Gel (Containing Sodium Polyacrylate To Covert Exudate Into Gel, So No Cross Contamination) Andclamp And Connector. With Cdsco And Fda & Ce Certified , 1000 Ml Canister (Sterile) With Instillation Trac Pad With 5 Lumen Tubing Set For Prevent Leakage And Blockage With Gel (Containing Sodium Polyacrylate To Covert Exudate Into Gel, So No Cross Contamination) And , Clamp And Connector. With Cdsco And Fda & Ce Certified , Foam Dressing (10 X 7.5 X 3.2Cm), 2 Sheets Of Vac Drape, 5 Lumen Trac Padtechonology With Connector, 1 Disposable Ruler, 1 Canister 300 Ml (Sterile) With 5 Lumentechonologytubing, Clamp And Connector With Cdsco And Fda & Ce Certified , Foam Dressing (18 X 12.5 X 3.2Cm), 2 Sheets Of Vac Drape, 5 Lumen Trac Padtechonology With Connector, 1 Disposable Ruler, 1 Canister 500 Ml (Sterile) With 5 Lumentechonologytubing, Clamp And Connectorwith Cdsco And Fda & Ce Certified , Foam Dressing (26 X 15 X 3.2Cm), 2 Sheets Of Vac Drape, 5 Lumen Trac Padtechonology With Connector, 1 Disposable Ruler, 1 Canister 1000 Ml (Sterile) With 5 Lumentechonologytubing, Clamp And Connector With Cdsco And Fda & Ce Certified , Foam Dressing (26 X 15 X 1.6Cm), 2 Sheets Of Vac Drape, 1 Instillation Trac Pad With 5 Lumen Tubing Set With Connector, 1 Disposable Ruler, 5 Lumen Trac Padtechonology With Connector, 1 Disposable Ruler, 1 Canister 300 Ml (Sterile) With 5 Lumentechonologytubing, Clamp And Connector With Cdsco And Fda & Ce Certified , Cassette With Instillation Tubing And 38Mm Spikeable Cap Adaptor. With Cdsco And Fda & Ce Certified , An Absorbent, Non Adherent Sterile Dressing With More Than 98% Silk Proteins. Nvtr Rate More Than 900 Kg/M2/24 Hours, Thickness Of Less Than 2Mm - Size: 5 X 5 Cm , An Absorbent, Non Adherent Sterile Dressing With More Than 98% Silk Proteins. Nvtr Rate More Than 900 Kg/M2/24 Hours, Thickness Of Less Than 2Mm - Size: 10 X 10 Cm , An Absorbent, Non Adherent Sterile Dressing With More Than 98% Silk Proteins. Nvtr Rate More Than 900 Kg/M2/24 Hours, Thickness Of Less Than 2Mm Size Dressing Impregnanted With Silver Ions And Sustained Release Upto 7 Days, Silver Content Of 1.5 Mg/Cm2 - Size: 5 X 5 Cm , An Absorbent, Non Adherent Sterile Dressing With More Than 98% Silk Proteins. Nvtr Rate More Than 900 Kg/M2/24 Hours, Thickness Of Less Than 2Mm Size Dressing Impregnanted With Silver Ions And Sustained Release Upto 7 Days, Silver Content Of 1.5 Mg/Cm2 - Size: 10 X 10 Cm , Anti Biofilm Wound Irrigation Solution With Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 40 Ml , Anti Biofilm Wound Irrigation Solution With Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 350 Ml , Anti Biofilm Wound Irrigation Rinsing Solution With Betaine Surfactant And 01% Polyaminopropyl Biguanide (Polithexanide) 1000 Ml , Anti Biofilm Wound Gel With Glycerol, Hydroxyethylcellulose, Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 30 Mg , Anti Biofilm Wound Gel With Glycerol, Hydroxyethylcellulose, Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 50 Gms , Anti Biofilm Wound Gel With Hydroxyethylcellulose, Glycerol, Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 250 Gms , Lipido-Colloid Wound Contact Layer Impregnated With Silver Salts And Poly-Absorbent Fibres - Size: 6X6 Cm , Lipido-Colloid Wound Contact Layer Impregnated With Silver Salts And Poly-Absorbent Fibres - Size: 10X10 Cm , Lipido-Colloid Wound Contact Layer Impregnated With Silver Salts And Poly-Absorbent Fibres - Size: 15X20 Cm , Sterilenon-Occlusivewound Contact Layer Composed Of A Polyester Mesh Impregnatedwithhydrocolloid Particles (Cmc), Cohesion Polymers And Petroleum Jelly Usinglipido-Colloid Technology (Tlc) - Size: 10 X 10Cm , Sterilenon-Occlusivewound Contact Layer Composed Of A Polyester Mesh Impregnatedwithhydrocolloid Particles (Cmc), Cohesion Polymers And Petroleum Jelly Usinglipido-Colloid Technology (Tlc) - Size: 15 X 20 Cm , Sterilenon-Occlusivewound Contact Layer Composed Of A Polyester Mesh Impregnatedwithhydrocolloid Particles (Cmc), Cohesion Polymers And Petroleum Jelly Usinglipido-Colloid Technology (Tlc) - Size: 20 X 30 Cm , Sterilenon-Occlusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles (Cmc), Petroleum Jelly, Polymers And Silver Salts (Ag) Usinglipido- Colloid Technology (Tlc) - Size: 10 X 10 Cm , Sterilenon-Occlusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles (Cmc), Petroleum Jelly, Polymers And Silver Salts (Ag) Usinglipido-Colloid Technology (Tlc) - Size: 15 X 20 Cm , Sterile Non-Occulusive Wound Contact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles (Cmc), Petroleum Jelly, Polymers And Silver Salts (Ag) Usinglipido-Colloid Technology (Tlc) - Size: 20 X 30 Cm , Sterile Wound Contact Layer Consists Of Silver Salts, Poly-Absorbent Fibres, Hydrocolloid Particles (Cmc), Petroleum Jelly And Polymers Usinglipido-Colloid Technology (Tlc) - Size: 6 Cm X 10Cm , Sterile Wound Contact Layer Consists Of Silver Salts, Poly-Absorbent Fibres, Hydrocolloid Particles (Cmc), Petroleum Jelly And Polymers Usinglipido-Colloid Technology (Tlc) - Size: 10 Cm X 10 Cm , Sterile Wound Contact Layer Consists Of Silver Salts, Poly-Absorbent Fibres, Hydrocolloid Particles (Cmc), Petroleum Jelly And Polymers Usinglipido-Colloid Technology (Tlc) - Size: 15 Cm X 20 Cm , Sterile Self -Adherent Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad, A Super Absorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing - Size: 8 X 8 Cm , Sterile Self -Adherenttlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad, A Super Absorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing - Size: 13 X 13 Cm , Sterile Self -Adherenttlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad, A Super Absorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing - Size: 10 X 25 Cm , Sterile Non-Woven Pad Composed Of Cohesive And Highly Absorbent Hydro-Desloughing Fibres (Polyacrylate), Combined Withtlc Matrix (Lipido Colloid Technology) Wound Contact Layer To Absorb, Trap And Drainage Of Slough From The Wounds. Sizes: 6X6 Cm , Sterile Non-Woven Pad Composed Of Cohesive And Highly Absorbent Hydro-Desloughing Fibres (Polyacrylate), Combined With Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer To Absorb, Trap And Drainage Of Slough From The Wounds. Sizes: 10X10 Cm , Sterile Non-Woven Pad Composed Of Cohesive And Highly Absorbent Hydro-Desloughing Fibres (Polyacrylate), Combined With Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer To Absorb, Trap And Drainage Of Slough From The Wounds. Sizes: 15X20 Cm , Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver With Edta & Bec, Ce, Iso & Fda Approved - Size:5 X 5Cm , Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver With Edta & Bec, Ce, Iso & Fda Approved - Size: 10 X 10 Cm , Hydrophilic Foam Dressing - Size: 10X10cm , Hydrophilic Foam Dressing - Size: 15X30cm , Hydrophilic Foam Silver Pad Dressing (Non-Adhesive And Antimicrobial) - Size:10X10cm , Hydrophilic Foam Silver Pad Dressing (Non-Adhesive And Antimicrobial) - Size: 15X30cm , Hydrocolloid Dressing With Absorbable Foam Padding (Extra-Thin Dressing) - Size: 10X10cm , Hydrocolloid Dressing With Absorbable Foam Padding- Size: 15X30 Cm , Sterile Human Amnion Chorion And Phmb Powder (3G ) , Sterile Polyhexamethylene Biguanide Coated Dehydrated Human Amnion Chorion Allograft - Size: 5X5 Cm , Sterile Polyhexamethylene Biguanide Coated Dehydrated Human Amnion Chorion Allograft - Size: 8X6 Cm , Sterile Polyhexamethylene Biguanide Coated Dehydrated Human Amnion Chorion Allograft- Size: 12X6 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 6X7 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 8X10 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 10X15 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 10X25 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 10X35 Cm , Topical Skin Adhesive For Wound Closure - 2-Octyl Cyanoacrylate High Viscosity Formulation For Small Incisions And Lacerations; 0.36 Ml Adhesive Volume , Semipermeable Waterproof Plastic Wound Dressing With Silver - Size: 5 Cm X 7 Cm , Semipermeable Waterproof Plastic Wound Dressing With Silver - Size: 15 Cm X 15 Cm , Semipermeable Adhesive Dressing Clear 6 X 7 Cm , Semipermeable Adhesive Dressingclear 8.5 X 10.5 Cm , Transparent Film Dressings Of A Thin Film Backing With Hypoallergenic, Latex-Free Adhesive - Size 6 Cm X 7 Cm , Transparentsemi Permeable Dressing Frame Style For Neonates Without Pad 10 Cm X 12 Cm Made Of Hypoallergenic, Latex-Free Adhesive , Transparentsemi Permeable Dressing Frame Style For Neonates Without Pad 6 Cm X 7 Cm Made Of Hypoallergenic, Latex-Free Adhesive , Adhesive Bandage Strips For Skin Closure Size 0.25X1.5 (Cost Per Strip Will Be Taken For Comparison Of Price) , Adhesive Bandage Strips For Skin Closure Size 0.25X4 (Cost Per Strip Will Be Taken For Comparison Of Price) , Adhesive Bandage Strips For Skin Closure Size 0.5X2 (Cost Per Strip Will Be Taken For Comparison Of Price) , Adhesive Bandage Strips For Skin Closure Size 0.5X4 (Cost Per Strip Will Be Taken For Comparison Of Price) , Reinforced Adhesive Skin Closures 0.125X3 (Cost Per Strip Will Be Taken For Comparison Of Price) , Reinforced Adhesive Skin Closures 1X5 (Cost Per Strip Will Be Taken For Comparison Of Price) , Silver Dressing With Pu Backing Layer And Absorbant Pad Dressing - Size: Dressing 5 X 7 Cm And Pad 2.5 X 4 Cm , Silver Dressing With Pu Backing Layer And Absorbant Pad Dressing - Size: Dressing 15 X 15 Cm And Pad 10 X 10Cm , Silver Dressing With Pu Backing Layer And Absorbant Pad Dressing - Size: Dressing 9 X 35Cm And Pad 5 X 30Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer - Size: 10 Cm X 10 Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer - Size: 10 Cm X 20 Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer - Size: 15 Cm X 15 Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer (Sacrum) - Size: 17.5 Cm X 17.5 Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer Heel 2D - Size: 16 Cm X 24 Cm , Super - Absorbant, Bacteria Binding Polyurethane Foam Dressing With Dialkyl Carbamoyl Chloride Layered - Size: 12.5 Cm X 12.5 Cm , Super - Absorbant, Bacteria Binding Polyurethane Foam Dressing With Dialkyl Carbamoyl Chloride Layered- Size: 15 Cm X 15 Cm , Super - Absorbant, Bacteria Binding Polyurethane Foam Dressing With Dialkyl Carbamoyl Chloride Layered - Size:17.5 Cm X 17.5 Cm , Antimicrobial Hydrocellular Foam Dressing. Ag Non Adhesive - Size: 10 Cm X 10 Cm , Antimicrobial Hydrocellular Foam Dressing. Ag Non Adhesive - Size: 12.5 Cm X 12.5 Cm , Antimicrobial Hydrocellular Foam Dressing. Ag Non Adhesive - Size: 15 Cm X 15 Cm , Antimicrobial Silver Dressing With Nano Crystallinewith Sustained Release Of Silver For 7 Days Having Polyster Mesh Size 15 Cm X 15 Cm , Antimicrobial Silver Dressing With Nano Crystallinewith Sustained Release Of Silver For 7 Days Having Polyster Mesh Size 10 Cm X 12.5 Cm , Hydrocellular Foam Dressing With Silicone Adhesive - Size: 10 Cm X 10 Cm , Hydrocellular Foam Dressing With Silicone Adhesive - Size: 10 Cm X 20 Cm , Hydrocellular Foam Sacrumdressing With Silicone Adhesive - Size: 16.8 Cm X 17.1 Cm , Self Adhesive Silicone Gel Sheet - Size: 12 Cm X 6 Cm , Super Oxidized Solution With Hypochlorous Acid 0.003% And Sodium Hypochlorite 0.004% With Neutral Ph - 100Ml , Super Oxidised Solution - Irrigation Solution With Hypochlorous Acid In Oxidized Water Base- 60Ml , Super Oxidized Gel With Hypochlorous Acid 0.008% And Sodium Hypochlorite 0.002%With Neutral Ph - 60Gm , Microbial Antiseptic Solution Poly Hexamethylene Biguanide - 100Ml , Hyaluronicacid Sodium Salt Gel - 50Gm , Phmb Impregnated Antimicrobial Dressing - Size 10X10 Cm And Absorbent Pad 5 X 5 Cm , Phmb Impregnated Antimicrobial Dressing - Size 10X25 Cm And Absorbent Pad 5 X 20 Cm , Antimicrobial Nano Crystaline Silver Dressing. Rayon Polyster Mesh Sandwiched Between Polyethylene Layers Binded With Ultrasonic Welds. Size 10Cm X 10 Cm , Antimicrobial Nano Crystaline Silver Dressing. Rayon Polyster Mesh Sandwiched Between Polyethylene Layers Binded With Ultrasonic Welds. Size 15Cm X 15 Cm , Antimicrobial Nano Crystaline Silver Dressing. Sustained Release Of Silver 70-100 Ppm For 3 Days Should Allow Fewer Dressing Changes. Size 20 Cm X 20 Cm , Antimicrobial Nano Crystaline Silver Dressing. Sustained Release Of Silver 70-100 Ppm For 3 Days Should Allow Fewer Dressing Changes. Size 15 Cm X 15 Cm , Tulle Gras Paraffin Gauze Dressing Medicated 10 Cm X 10 Cm , Tulle Gras Paraffin Gauze Dressing Chlorhexidine Medicated 15 Cm X 30 Cm , Partially-Hydratedamorphous Hydrogel15gms , Amorphous Hydrogel Wound Dressing Antimicrobial Antibacterial Gel With Nano Silver - 15 Gms , Amorphous Hydrogel Wound Dressing Antimicrobial Antibacterialgel With Nano Silver - 50 Gms , Cmc Sodium Wound Dressing Gel-15 Gms , Transparent Polyurethane Surgical Drape Size 40 Cm X 42 Cm , Transparent Polyurethane Surgical Drape Size 30 Cm X 28 Cm , Waterproof & Bacteria Proof Post-Operative Film Dressing For Post Surgical Wounds & Minor Trauma Wounds Size 9.5 Cm X 8.5 Cm , Waterproof & Bacteria Proof Post-Operative Film Dressing For Post Surgical Wounds & Minor Trauma Wounds Size 15.5 Cm X 8.5 Cm , Transparent Film Roll. Thin Waterproof Polyurethane Film With High Mvtr With Low Allergy Water Based Acrylic Adhesive That Minimizes The Risk Of Skin Irritation Or Sensitivity, Film Is Highly Conformable And Extensible To Fit To Awkward Dressing Areas, Unique And Novel Roll Format Enables Rapid And Economical Use- Size:10 Cm X 10 Cm , Stainless Steel Suture 5-0/ 6-0 (Pack Of 12 Nos) , Synthetic Absorbable Sutures (Polyglycolic Acid/Polyglactin 910) -4/0 With 16Mm 5/8 Circle Cutting 45Cm (Pack Of 12 Foils) , Absorbent, Low Adherent Post Operative Dressing With Adhesive Coated Backing Material. - Size: 15 Cm X 8 Cm , Absorbent, Low Adherent Post Operative Dressing With Adhesive Coated Backing Material. - Size: 25 Cm X 10 Cm , Negative Pressure Wound Therapy Dressing. Subatmospheric Pressure Therapy Pu Foam - Size: 10X 10 X 2.8 Cm And 0.4Ltr Fluid Cask With Gel , Negative Pressure Wound Therapy Dressing. Subatmospheric Pressure Therapy Pu Foam - Size: 10X 15 X 2.8 Cm And 0.4Ltr Fluid Cask With Gel , Negative Pressure Wound Therapy Dressing. Subatmospheric Pressure Therapy Pu Foam - Size: 23.8 X 15.8X 2.8 Cm And 1 Ltr Fluid Cask With Gel , Dressing Material For Negative Pressure Wound Therapy Dressing Kit Consister - 500Ml Capacity Large , Dressing Material For Negative Pressure Wound Therapy Dressing Kit Consister - 500Ml Capacity Medium , Dressing Material For Negative Pressure Wound Therapy Dressing Kit Consister - 500Ml Capacity Small , Vinyl Acetate Copolymer 250Ml/1000Mldisposable Exudate Collectionpouch Individually Sealed In Sterile Package, Used With 250Ml / 1000Ml Reusable Containers. The Securely Mounted Pouch Tube Consists Of 3 Active Ventilation Lumens And 1 Exdate Lumen. It Should Have Chemical Filter To Trap Moisture, Odour, To Monitor The Amount Of Infections Fluid Being Removed, To Solidify Infectious Fluid And Should Have Minimum Capacity , Advance Wound Care Dressing, Non-Woven Highly Absorbent, Hemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized And Moisture Proof Packing, Manufactured In India, Gmp And Iso 13485 Certified. Size: 10X10 Cm , Advance Wound Care Dressing, Non-Woven Highly Absorbent, Hemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized And Moisture Proof Packing, Manufactured In India, Gmp And Iso 13485 Certified. Size: 15 X 15 Cm , Microsutures Polymide Black Coloured 11/0 Needle Thickness 70-100 Microns Length 3.5 - 5Mm3.8 Circle135 Degreesmicro Taper Point(Pack Of 12 Nos) , Microsutures Polymide Black Coloured10/0 Needle Thickness 70- 100 Microns Length 3.5 - 5Mm3.8 Circle 135 Degrees Micro Taper Point (Pack Of 12 Nos) , Microsutures Polymide Black Coloured9/0 Needle Thickness 100-150 Microns Length 3.5 - 5Mm3.8 Circle 135 Degrees Micro Taper Point (Pack Of 12 Nos) , Microsutures Polymide Black Coloured8/0 Needle Thickness 100-150 Microns Length4 - 7 Mm3.8 Circle 135 Degrees Micro Taper Point (Pack Of 12 Nos) , Hydrophilic Non-Woven Gauze Roll, Impregnated With A Naturally Occurring Inorganic Mineral - Kaolin, Along With A Unique Direct Pressure Adhesive Bandage Packaged In A Foil Pouch For Aseptic Removal - 7.6 Cm X 3.7 Cm , Hemostatic Dressing For External Application, 4 Ply Non-Woven Gauze - Size:4 X 4 Inches, Impregnated With A Naturally Occurring Inorganic Mineral - Kaolin, With A X-Ray Detectable Strip Packaged In A Foil Pouch For Aseptic Removal.Fda & Ce Approved , Patient Pre-Operative Skin Preparation Solution 25 Ml In One-Step Sterile Applicator Container For Single Use With 2% Chg And 70% Ipa With Orange Tint Color For Visibility. Fda Approved. , Patient Pre-Operative Skin Preparation Solution 10 Ml In 0Ne-Step Sterile Applicator Container For Single Use With 2% Chg And 70% Ipa With Orange Tint Color For Visibility. Fda Approved. , Thromboembolism Stocking , Acellular Dermal Matrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (74X52x1mm), Usfda And Dcgi Approved , Acellular Dermal Matrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (74X52x2mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (148X105x1mm) Usfda And Dcgi Approved , Acellular Dermalmatrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (52X37x1mm) , Usfda And Dcgi Approved , Acellular Dermalmatrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (52X37x2mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Fenestrated, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (74X52x1mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (148X105x2mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Fenestrated, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (74X52x3mm), Usfda And Dcgi Approved , Acellular Dermal Matrix, Fenestrated, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (52X37x1mm) , Usfda And Dcgi Approved , Acellular Dermalmatrix, Fenestrated, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (52X37x3mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Single Step Procedure For Dermal Regeneration, Non- Chemical Cross Linked, Room Tempreture Storage, Size(74X52x1mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Single Step Procedure For Dermal Regeneration, Non- Chemical Cross Linked, Room Tempreture Storage, Size(52X37x1mm), Usfda And Dcgi Approved , Dermal Regeneration Template Bilayer (Bovine Collagen And Glycosaminoglycan (Chondroitin-6- Sulfate) And Silicone Layer - Size: 2In X 2In (5Cmx5cm) , Dermal Regeneration Template Bilayer (Bovine Collagen And Glycosaminoglycan (Chondroitin-6- Sulfate) And Silicone Layer - Size: 4In X 5In (10Cmx12.5Cm) , Dermal Regeneration Template Bilayer (Bovine Collagen And Glycosaminoglycan (Chondroitin-6- Sulfate) And Silicone Layer - Size: 4In X 10In (10Cmx25cm) , Meshed Dermal Regeneration Template Bilayer - Mesh (Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) And Silicone Layer - Size: 2In X 2In (5Cmx5cm) , Meshed Dermal Regeneration Template Bilayer - Mesh (Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) And Silicone Layer - Size: 4In X 5In (10Cmx12.5Cm) , Meshed Dermal Regeneration Template Bilayer - Mesh (Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) And Silicone Layer - Size: 4In X 10In (10Cmx25cm) , 2 Octyl Cyanoacrylate Adhesive In A Special Aluminium Collapsible Tube Pack ( 2 X 1.75Gm) And Applicator Having Self Puncturing Cap And A Soft Elastomeric Tip (Soft Bristles) For Ease Of Application Along With Curved Mesh Design Of Length 30 Cm Skin Closure System , 2 Octyl Cyanoacrylate Adhesive Having 1 Ml (One Ml)In A Special Aluminium Collapsible Tube Pack And Applicator Having Self Puncturing Cap And A Soft Elastomeric Tip , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Chronic & Acute Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rate Should Be 800 G/M2/24Hr Size - 10X10 Cm , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Chronic & Acute Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rate Should Be 800 G/M2/24Hr Size - 15X15 Cm , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Infected Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rateshould Be 800 G/M2/24Hr. 4) 7 Days Of Silver Releaseand Silver Content Of 1.5Mg/Cm2size - 5X5 Cm , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Infected Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rateshould Be 800 G/M2/24Hr. 4) 7 Days Of Silver Releaseand Silver Content Of 1.5Mg/Cm2 Size - 20X20 Cm , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Infected Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rateshould Be 800 G/M2/24Hr. 4) 7 Days Of Silver Releaseand Silver Content Of 1.5Mg/Cm2 Size - 30X30 Cm , Hydrophobic Bacteria And Fungi Binding Wound Dressing Pad,Consists Of A Dacc Coated Wound Contact Layer Combined With An Absorbent Core-Size: 10X10 Cm , Hydrophobic Bacteria And Fungi Binding Wound Dressing Pad,Consists Of A Dacc Coated Wound Contact Layer Combined With An Absorbent Core-Size: 10X20 Cm , Non-Absorbent Bacteria And Fungi Binding Wound Contact Layer,Consists Of A Dacc-Coated 8 Folded Wound Contact Layer. Size: 7X10 Cm , Bacteria And Fungi Binding Absorbent Polyurethane Foam With Super-Absorbent Stripes Which Absorb And Lock Additional Wound Exudate With Wound Contact Surface Consists Of A Dacccoated Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour. Size: 10X10 Cm , Bacteria And Fungi Binding Absorbent Polyurethane Foam With Super-Absorbent Stripes Which Absorb And Lock Additional Wound Exudate With Wound Contact Surface Consists Of Adacccoated Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour. Size: 12.5X12.5 Cm , Bacteria And Fungi Binding Absorbent Polyurethane Foam With Super-Absorbent Stripes Which Absorb And Lock Additional Wound Exudate With Wound Contact Surfaceconsists Of Adacccoated Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour. Size: 15X15 Cm , Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size.Size: 7Cmx9cm Oval , Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size.Size: 12.5Cmx12.5Cm , Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size.Size: 10Cmx10cm , Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size.Size: 10Cmx20cm , Anatomically Heel Shaped Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size. Size: 16Cmx24cm , Anatomically Heel Shaped Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size And With Two Fixation Strips Are Placed In The Peel Pouch Meant For Fixation Of The Dressing To The Heel. , Knee High Open Toe Gradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long - Extra Large , Knee High Open Toe Gradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long - Large , Knee High Open Toe Gradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long - Medium , Thigh High Open Toegradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long With An Silicon Impregrantedthigh Band- Extra Large , Thigh High Open Toegradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long With An Silicon Impregrantedthigh Band- Large , Thigh High Open Toegradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long With An Silicon Impregrantedthigh Band- Medium , Compression System With Two Components, A Medical Stockingwith 76% Polyamide And A Compression Liner With 79% Polyamide And 5% Silk, Provide A Nominal Compression Of 40 Mmhg* At The Ankle With Decreasing Pressure Gradient From Distal To Proximal -Large , Compression System With Two Components, A Medical Stockingwith 76% Polyamide And A Compression Liner With 79% Polyamide And 5% Silk, Provide A Nominal Compression Of 40 Mmhg* At The Ankle With Decreasing Pressure Gradient From Distal To Proximal - Extra Large , Compression System With Two Components, A Medical Stockingwith 76% Polyamide And A Compression Liner With 79% Polyamide And 5% Silk, Provide A Nominal Compression Of 40 Mmhg* At The Ankle With Decreasing Pressure Gradient From Distal To Proximal - Medium , Leg Wrap Withshort Stretch Adjustable Compression Band System With 50% Overlapping Wraps Contains 82% Polyamide And 18% Elastane Along With Non-Compressive Linerscontains 96% Polyamide And 4% Elastane , Foot Wrap Withshort Stretch Adjustable Compression Band System With 50% Overlapping Wraps Contains 82% Polyamide And 18% Elastanealong With Non-Compressive Linerscontains 96% Polyamide And 4% Elastane , Knee Wrap Withshort Stretch Adjustable Compression Band System With 50% Overlapping Wraps Contains 82% Polyamide And 18% Elastane With Non-Compressive Linerscontains 96% Polyamide And 4% Elastane , Multipurpose Tube Holder For Foley Catheters , Polyurethane Foam Mattress 23 Density 72X36 Mm (In Rolls) , Microcuff Endotracheal Tube (Oral, Curved) Forpediatrics -Size 4 Mm , Laparotomy Drape , Craniotomy Drape , Surgeon Gown (Large Size) Which Is A Fully Wrap Around Variety And Can Be Tied In Front, With Water, Alcohol Resistance. Outer Layer Spun Bound Repellant Layer With Inner Two Layers With Antibacterial Property (Melt Blown), And Innermost Layer For Fabric Strength (Spun Bound) Soft Elastic Wrist Cuff. Adjustable Neck Line Needed. Low Linting. Sample Absolutely Required. Must Meet Or Exceed Enl3795 Standards Or Else Will Not Be Considered. Quote Separately For Tape Covered Double-Stitched Seam Type Gown As Well As The One With Ultrasound Bonded Seam , Endotracheal Tube With Polyurethane Cuff (Size: 5.0, 5.5, 6.0,6.5) (Pack Of 10) , Endotracheal Tube With Polyurethane Cuff (Size: 2.5, 4.5)(Pack Of 10) , Oxygen Mask Without Nebulizer - Adult , Oxygen Mask Without Nebulizer - Pediatrics , Dial Flow (I.V. Infusion Dial Regulator) Flow Rates From 20 To 250Ml / Hr; Stable Flow Rates Upto 72 Hrs; Reliable And Accurate Flow Control; Dial With Ridges For Easy Grippingand Adjustment , Nrbm Face Mask With Reservoir Bag - Adult , Bacterial Filter , Oral Airway , T-Piece Connector , Catheter Mount , Ventilator Circuit , Burette Set , Microscope Cover - Medium Compatible With Leica M525 Mc1 , Microscope Cover - Medium Compatible With Carl Zeiss , Glycolic Acid Peels For Scar Treatment 20% - 100Ml , Glycolic Acid Peels For Scar Treatment 35% - 100Ml , Glycolic Acid Peels For Scar Treatment 50% - 100Ml , Glycolic Acid Peels For Scar Treatment 75% - 100Ml , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Round 150 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes -Round 210 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Round 310 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Round 400Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 170 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 250 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 260 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 300 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 350 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Elliptical 150Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Elliptical 250 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Elliptical 125 Cc , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 2H With Gap , Titaniumlow Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 4H With Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 4H Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 6H With Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 6H Without Gap , Titanium Low Profile Plates (Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 4H- L Right , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 4H- L Left , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 5H- L Lt & Rt , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Orbital Plate Short Bar 0.6 Mm Thicknessscrew 1.5 Mm4/6 Holes , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.6 Mm 8 Holed Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.6 Mm 12 Holed Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.6 Mm 16 Holed Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.6 Mm 24 Holed Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.8 Mm 10 Holes , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.8 Mm 12 Holes , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.8 Mm 16 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle Short 1Mm 6 Holes Left , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle Short 1Mm 6 Holes Right , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle Long1mm6 Holes Right , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle Long 1Mm6 Holes Left , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle1mm Long5 Holes Right , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle1mm Long5 Holes Left , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate4 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate 6 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate 8 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate 12 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate16 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate 20 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate With Bar 2 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate With Bar 4 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate With Bar 6 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Y Plate 1 Mm 4 Holes Short , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Y Plate 1 Mm 4 Holes Long , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Double Y Platebroad 1 Mm6 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - T Plate 1 Mm 4 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - X Plate 1 Mm5 Holes , Titanium Reconstruction Plates (Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleright 16 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleleft 16 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleright 20 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleleft 20 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleright 24 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleleft 24 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate - Straight - 16 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate Straight - 20 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate - Straight - 24 Holes , Titanium Screws For Kls Martin System1.5 X 4Mm (To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System1.5 X 6Mm(To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System1.5 X 8Mm (To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System1.5 X 10Mm (To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System1.5 X 12Mm (To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System 2Mm X 4Mm(To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System 2Mm X 6Mm(To Be Supplied With Screwdriver) , Titanium Self Drilling Screws 1.5 Mm , Length 4 Mm (Pack Of 1 Unit) , Titanium Self Drilling Screws 1.5 Mm , Length 5 Mm (Pack Of 1 Unit) , Self Drilling Screws 1.5 Mm Length 8 , Self Drilling Screws 2 Mm Length 4 , Self Drilling Screws 2 Mm Length 6 , Self Drilling Screws 2 Mm Length 8 , Titanium Midfacial (Outer Diameter 1.5Mm) Self-Tapping Screw-6 Mm Length (Pack Size - 1 No) , Titanium Mandible (Outer Diameter 2Mm) Self-Tapping Screw-6 Mm Length (Pack Size - 1 No) , Titanium Mandible (Outer Diameter 2Mm) Self-Tapping Screw-8 Mm Length (Pack Size - 1 No) , Titanium Reconstruction (Outer Diameter 2.3/2.4Mm) Self-Tapping Screw-10 Mm Length (Pack Size - 1 No) , Titanium Reconstruction (Outer Diameter 2.3/2.4Mm) Self-Tapping Maxi Screw-12 Mm Length (Pack Size - 1 No) , Breast Implant Insertion Device- Funnel Constructed Of A Flexible, Transparent, Polymeric Filmthat Accommodates A Variety Of Gel Breast Implant Shapes And Sizes , External Mandibular Distractors Unidirectional , External Mandibular Distractors Bidirectional , Intraoral Mini Distractors For Mandible Right 10Mm(Titanium) , Intraoral Mini Distractors For Mandible Right 15Mm (Titanium) , Intraoral Mini Distractors For Mandible Right 20Mm (Titanium) , Intraoral Mini Distractors For Mandible Right 25Mm (Titanium) , Intraoral Mini Distractors For Mandible Left 10Mm (Titanium) , Intraoral Mini Distractors For Mandible Left 15Mm (Titanium) , Intraoral Mini Distractors For Mandible Left 20Mm (Titanium) , Intraoral Mini Distractors For Mandible Left 25Mm (Titanium) , Intraoral Mini Distractors Vertical For Alveolar 2+2 Holes 3+3 Holes (Titanium) , Intraoral Mini Distractors For Maxilla Left (Titanium) , Intraoral Mini Distractors For Maxilla Right (Titanium) , Drill Bits 1.2/1.3 Mm Flute With Stop/Guard - Short , Drill Bits 1.2/1.3 Mm Flute With Stop/Guard - Long , Drill Bits 1.4/1.5 Mm Flute With Stop/Guard - Short , Drill Bits 1.4/1.5 Mm Flute With Stop/Guard - Long , Drill Bits 1.6 Mm Flute With Stop/Guard - Short , Drill Bits 1.6 Mm Flute With Stop/Guard - Long , Drill Bits 1.8 Mm Flute With Stop/Guard - Short , Drill Bits 1.8 Mm Flute With Stop/Guard - Long , Drill Bits 2.3 Mm Flute With Stop/Guard - Short , Drill Bits 2.3 Mm Flute With Stop/Guard - Long , Drill Bits 1.2/1.3 Mm Flute , Drill Bits 1.4/1.5 Mm Flute , Drill Bits 1.6 Mm Flute , Drill Bits 1.8 Mm Flute , Drill Bits 2.3 Mm Flute , Electric Dermatome Blades For Zimmer Dermatome , Acellular Dermal Matrix For Grafting/Implant Size: 2X2cm - Thick , Acellular Dermal Matrix For Grafting/Implant Size: 4X6cm - Thick , Acellular Dermal Matrix For Grafting/Implant Size: 8X16cm - Thick , Microscope Handle Drapes (180 X 330) , Sheathed Microtip Cautery Tips 4 Cm Straight (3/32”) Sleeve , Sheathed Microtip Cautery Tips 3 Cm Straight (3/32”) Sleeve , Bipolar Forceps Curved Type Bend 4 Tip 2 Mm For Bipolar Diathermy , Bipolar Forceps Straight 5 Tip 2Mm For Bipolar Diathermy , Bipolar Forceps Straighttip Bend 6Tip 2Mmfor Bipolar Diathermy , Bipolar Rf Cable For Bipolar Diathermy , Varispeed Battery Pack For Resorbable Implant System Strykar Delta System , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 14 Holes, 1.4 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 21 Holes, 1.4 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 2 X 21 Holes, 1.4 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 2 X 21 Holes, 0.5 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 3 X 21 Holes, 0.5 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Delta System, Ladder Plate, 2X 5 Holes , Plates & Meshes For Resorbable Implant System Strykar - Delta System Resorb Straight Plate 14 Holes , Plates & Meshes For Resorbable Implant System Strykar - Mesh 55 X 55 X 1.0 Mm , Plates & Meshes For Resorbable Implant System Strykar - Mesh 55 X 55 X 1.4 Mm , Plates & Meshes For Resorbable Implant System Strykar - Delta System Mesh- 55 X 55Mm , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- Delta System, 1.7 X 4Mm Screw, Pkg. 10 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- Delta System, 1.7 X 5Mm Screw, Pkg. 10 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 1.7 X 4 Mm, Pkg. 4 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 1.7 X 5 Mm, Pkg. 4 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 1.7 X 6 Mm, Pkg. 4 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.2 X 4 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.2 X 6 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.6 X 4 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.6 X 6 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.6 X 8 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.6 X 10 Mm, Pkg. 2 , Plate Holders & Cuttersfor Resorbable Implant System Strykar - 1.7 Mm Bone Tap , Plate Holders & Cuttersfor Resorbable Implant System Strykar - 2.2 Mm Bone Tap , Self-Holding Screws Drivers/Driver Bitsfor Resorbable Implant System Strykardelta System - 1.7 Mm Screwdriver Blade, 80 Mm , Taps (Ranging From 1.3 Mm To 4 Mm)For Resorbable Implant System Strykar Delta System - Self-Drilling Tap 1.7 Mm, 3 & 4 Mm, Dent , Taps (Ranging From 1.3 Mm To 4 Mm)For Resorbable Implant System Strykar Delta System - Self-Drilling Tap 1.7 Mm, 5 & 6 Mm, Dent , Taps (Ranging From 1.3 Mm To 4 Mm)For Resorbable Implant System Strykar Delta System - Self-Drilling Tap 2.2 Mm, 4 Mm, Dent , Taps (Ranging From 1.3 Mm To 4 Mm)For Resorbable Implant System Strykar Delta System - Self-Drilling Tap 2.2 Mm, 6 Mm, Dent , K- Wire 0.8 Mm Dia6 Length , K- Wire 1.2 Mm Dia6 Length , K- Wire 1.5 Mm Dia6 Length , K- Wire 1.6 Mm Dia6 Length , K- Wire 1.0 Mm Dia12 Length , K- Wire 1.2 Mm Dia12 Length , K- Wire 1.5 Mm Dia12 Length , Adsons Fine Toothed Forceps With 2Mm Fine Tip (Comfort Of Surgeon For Prolonged Handling Will Be Used As Selection Criteria) , Beaver Handles Round, Knurled, Stainless 10.0 Cm L X 0.50 Cm D , Beaver Handles Round, Knurled, Stainless 13.0 Cm L X 0.50 Cm D , Fine Toothed Forceps , Fine Tip Right Angled Forceps , Kilner Dott Mouth Gag With Three Blades (Set Of 2) - Pediatric Size , Mc Donalds Dissecting Forceps (For Lip) Fine - 1Mm , Skin Graft Blade For Humbys Knife , Ssg Handle (Humbys) , Skin Hook (Single) , Skin Hook - Fine (Single) , Scalpel Blade Remover , Thudiccum Nasal Speculum (All Sizes Each) , Zygoma Elevator , Langenbeck Retractor , Non-Stick Bipolar Cable , Non-Stick Bipolar Forceps Fine Tips - Small , Non-Stick Bipolar Forceps Fine Tips - Medium , Non-Stick Bipolar Forceps Fine Tips - Large , Non-Stick Bipolar Forceps Fine Tips - Angled , Proctoscope - Small , Proctoscope - Medium , Proctoscope - Large , Bayonet Forceps , Dissecting Forceps (Toothed)-12 Cm , Dissecting Forceps (Non-Toothed)-12 Cm , Mosquito Forceps - Straight - 12 Cm , Mosquito Forceps - Curved - 12 Cm , Iris Scissors - Straight -12 Cm , Iris Scissors - Curved -12 Cm , Acrylic -Heat Cure-Clear (Pack 450Gm Powder & 275Ml Liquid) , Acrylic -Heat Cure-Pink (Pack 450Gm Powder & 275Ml Liquid) , Acrylic -Self Cure-Clear (Pack 400Gm Powder & 400Ml Liquid) , Acrylic -Self Cure-Pink (Pack 400Gm Powder & 400Ml Liquid) , Alginate Impression Material (Dustless) Pack Of 750Gm , Carborundum Discs (For Mandrel Mount) - Pack Of 10 , Cold Mount Seal (Pack Of 450Ml) , Dappen Dish (Pack Size - 1 No.) , Dental Stone (Pack Of 3 Kg) , Die Stone (Pack Of 3 Kg) , Disc Mandrel (Pack Size - 1 No.) , Modelling Wax Sheet No.2 (Pack Of 10 Sheets) , Mouth Mirror With Handle (Pack Size - 1 No.) , Plaster Of Paris (Type Ii) (Pack Of 5 Kgs) , Polishing Buff For Dental Lathe (Pack Size - 1 No.) , Pumice Powder For Polishing Dentures (Pack Of 2 Kg) , Sandpaper Mandrel (Pack Size - 1 No.) , Soft Putty Impression Material (Pack Of 450Ml Soft Putty And 180Ml Light Body) , Stainless Steel Wire- 26 Guage (Pack Size - 1 No.) , Stainless Steel Wire- 32 Guage (Pack Size - 1 No.) , Vulcanite Trimmer (Tc) (Pack Size - 1 No.) , Micromotor Straight Handpiece For Use With Surgical Burs And Cutters Should Carry Standard/Ce Certified.Warranty - 2 Years (Pack Size - 1 No.) , Adams Plier (Pack Size - 1 No.) , Cheek Retractor - Clear (Pair Of 2) , Plier Stand - Stainless Steel (Pack Size - 1 No.) , Tweed Loop Forming Plier (Pack Size - 1 No.) , Elastics - Red (Pack Of 1000) , Elastics - 3/16-4.5 Oz. (Pack Of 1000) , Orthodontic Plastic Model Bases (Pack Size - 1 No.) , Orthodontic Stone (3Kg Pack) , Stainless Steel Wire - 0.7Mm (Spool Of 500Gms) , Anodised Aluminium Tray With Mat And Continuous Holders - Dimensions:9X7x1.25 , Micro Jewellers Forcepsstraight - Matte Finish 6 Length(Comfort Of Surgeon For Prolonged Holding, Ability Of Tip To Hold Both Microneedle And Microsuture Will Be Used As Selection Criteria) , Micro Jewellers Forceps Angled - Matte Finish 6 Length, Less Than 5Mm Angled Arm With Less Than 1Mm Tip(Comfort Of Surgeon For Prolonged Holding, Ability Of Tip To Hold Both Microneedle And Microsuture Will Be Used As Selection Criteria) , Micro Jewellers Forcepscurved - Matte Finish 0.2Mm Tip(Comfort Of Surgeon For Prolonged Holding, Ability Of Tip To Hold Both Microneedle And Microsuture Will Be Used As Selection Criteria) , Micro Needle Holder - Curved - 6 Length 0.6 Mm Wide Jaw- Castroveijo Type Without Lock (Comfort Of Surgeon For Prolonged Holding, Ability Of Tip To Hold Both Microneedle And Microsuture Will Be Used As Selection Criteria) , Micro Needle Holder Castroveijo Type Without Lock Straight - 15 Cm , Vessel Clamps (Single Pair) - 2A , Vessel Clamps (Single Pair) - 2V , Vessel Clamps (Single Pair) - 3A , Vessel Clamps (Single Pair) - 3V , Vessel Clamps (Single Pair) - 4A , Vessel Clamps (Single Pair) - 4V , Tenotomy Scissors - 5/6 Curved , Tenotomy Scissors Long - 10-12 Curved , Tenotomy Scissors Long - 8 Curved , Titanium Vessel Dilator, Angled, 0.2Mm Tip , Titanium Vessel Dilator, Straight, 0.2Mm Tip , Titanium Vessel Dilator, Short Model , Micro Ring Forceps, 6 , Micro Vessel Dilator, Long Model, Straight, Matt Finish , Micro Vessel Dilator Forceps, Parallel Flattened With Round Handle, Straight, 5/6 Inch Length 0.6-1Mm Wide Tip (0.2Mm Tip) , Micro Scissors 5/6 , Straight, Blunt Tip, Round Handle Castroviejo Type , Micro Scissors 5/6 , Curved, Blunt Tip, Round Handle Castroviejo Type , Micro Scissors 5/6 , Straight, Sharp Tip, Round Handle Castroviejo Type , Micro Scissors 5/6 , Curved, Sharp Tip, Round Handle Castroviejo Type , Mixter Right Angled Forceps (Set Of 3) , Titanium Micro Forceps With Platform, 15 Cm Long , Sterilizer Box With 1 Silicon Mat , Ss Beaker With Silicon Mat , Orthopedic T-Handle , Insulated Bipolar Forceps, Adson, Fine Tip 5 (Autoclavable And Reusable, Non-Stick) , Insulated Bipolar Forceps, Adson, Fine Tip 6 (Autoclavable And Reusable, Non-Stick) , Insulated Bipolar Forceps, Bayonet, Fine Tip 6 (Autoclavable And Reusable, Non-Stick) , Insulated Bipolar Forceps, Adson, Fine Tip 5 (Autoclavable And Reusable) , Insulated Bipolar Forceps, Fine Tip 6 (Autoclavable And Reusable) , Insulated Bipolar Forceps, Bayonet, Fine Tip 6 (Autoclavable And Reusable) , Debakey Medium Vascular Size Forceps 6 , Bulldog Clamps, Atraugrip Jaws, Straight - 1Mm/2Mm Tip , Bulldog Clamps, Atraugrip Jaws, Angled - 1 Mm/2 Mm Tip , Bulldog Clamps, Atraugrip Jaws, Curved - 1 Mm/2 Mm Tip , Vessel Anastomotic Coupler- 1 Mm , Vessel Anastomotic Coupler- 1.5 Mm , Vessel Anastomotic Coupler- 2 Mm , Vessel Anastomotic Coupler- 2.5 Mm , Vessel Anastomotic Coupler- 3 Mm , Vessel Anastomotic Coupler- 3.5 Mm , Vessel Anastomotic Coupler- 4 Mm , Bulldog Disposable Vascular Clamps-Small , Bulldog Disposable Vascular Clamps-Medium , Liga Clips Micro Clips , Liga Clips Medium , Liga Clips Small , Coupler Forceps , Vessel Measuring Gauge , Fine Suction Nozzle - Size : 2 And 3 , Alar Retractor , Vessel Dilator - 0.2 Mm Tip Straight , Vessel Clamp Applicator , Micro Clamps Applicators (Forceps), 6 Long, Matt Finish (Should Be Compatible With The Vessel Clamps Provided) , Pediatric Mosquito Artery , Needle Holder Medium & Fine Tip (1Mm/2Mm) , Needle Holder Fine -12 Cm , B.P. Handle No. 3 , Head Base Ring Gel Pad - Adult Size , Head Base Ring Gel Pad - Pediatric Size , Head Base Gel Pad- Adult Size , Head Base Gel Pad- Pediatric Size , Head Neck Base Gel Pad- Adult Size , Sacral Pad- Adult Size , Heel Pad- Adult Size , Horseshoe Gel Pad Without Base - Adult Size , Knee/Arm Rest Gel Pad - Adult Size , Knee/Arm Rest Gel Pad - Pediatric Size , Gel Prone Head Rest , Chest Roll Gel Pad (Dome Positioner Prime)- Adult Size , Chest Roll Gel Pad (Dome Positioner Prime)- Pediatric Size , Universal Gel Pillows - Adult Size , Universal Gel Pillows - Pediatric Size , Neonatal Roll - Should Contain Different Sizes , Pediatric Roll- Should Contain Different Sizes , Human Acellular Matrix Preserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Meshed Size (Cm) 2X2cm , Human Acellular Matrix Preserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Meshed Size (Cm) 3X3cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 4X4cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 5X7cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 6X7cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 4X8cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 5X9cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Unmeshed Size (Cm) 2X2cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Unmeshed Size (Cm) 4X4cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Unmeshed Size (Cm) 5X7cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Unmeshed Size (Cm) 6X7cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Unmeshed Size (Cm) 4X8cm , Disposable Negative Pressure Wound Therapy Kit With Multilumen Tubing And Peri Wound Protection Layer- Size: Small 1) Should Contain Hydrophobic Pu Foam Size: 11Cm X 8Cm X 3Cmadhesive Drapes 2) Should Contain Multilumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Disposable Negative Pressure Wound Therapy Kit With Multilumen Tubing And Peri Wound Protection Layer- Size: Medium 1) Should Contain Hydrophobic Pu Foam Size: 17Cm X 15Cm X 3Cm Adhesive Drapes 2) Should Contain Multilumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Disposable Negative Pressure Wound Therapy Kit With Multilumen Tubing And Peri Wound Protection Layer- Size: Large 1) Should Contain Hydrophobic Pu Foam Size: 26Cm X 15Cm X 3Cm Adhesive Drapes 2) Should Contain Multilumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Negative Pressure Wound Therapy Dressing With Instillation 1) Containing Multilayer Hydrophobic And Hydrocellular Foam Dressings-Size: Small (7.5Cm X 10Cm X 1.6Cm)X1 And (7.5Cm X 10Cm X 1Cm)X1 And Adhesive Drapes 2) Should Contain Multi-Lumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Negative Pressure Wound Therapy Dressing With Instillation 1) Containing Multilayer Hydrophobic And Hydrocellular Foam Dressings-Size:Medium (12.5 X 18 X 1.6Cm)X1 And (12.5 X 18 X 1Cm)X1 And Adhesive Drapes 2) Should Contain Multi-Lumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Negative Pressure Wound Therapy Dressing With Instillation 1) Containing Multilayer Hydrophobic And Hydrocellular Foam Dressings-Size: Large ( 26Cm X 15Cm X 1.6Cm)X1 And (26Cm X 15Cm X 1Cm)X1 And Adhesive Drapes 2) Should Contain Multi-Lumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Negative Pressure Wound Therapy Cansiter 500Ml And Instillation Head Connector For Instillation Therapy System- 1) Should Contain 500Ml Container With Multilumen Tubing & Clamp 2) Should Contain Instillation Flow Tracker /Irrigation Head/ Casette , Dynamic Incision Management Kit (Size: 4.5Cm X 20Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3)Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4)Should Be Compatible With 100Ml-150Ml Canister , Dynamic Incision Management Kit (Size: 4.5Cm X 25Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3)Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4)Should Be Compatible With 100Ml-150Ml Canister , Dynamic Incision Management Kit (Size: 4.5Cm X 30Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3)Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4)Should Be Compatible With 100Ml-150Ml Canister , Dynamic Incision Management Kit (Size: 4.5Cm X 35Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3)Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4)Should Be Compatible With 100Ml-150Ml Canister , Dynamic Ulcer Management Kit (Size: 14Cm X 12Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3) Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4) Should Be Compatible With 100Ml-150Ml Canister , Dynamic Ulcer Management Kit (Size: 15Cm X 17.5Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3) Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4) Should Be Compatible With 100Ml-150Ml Canister , Container With Gel For Palm Size Dynamic Incision Management System (150Ml) 1) Transparent Container With Gel To Collect Exudate 2) Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 3) Should Be Compatible With Dynamic Incision Management Kits , Mini Sagittal Saw Compatible With Stryker Handpiece For Craniotomy , Three Pin Head Rest For Craniotomy , Mayfield Horseshoe Headrest - Adult For Craniotomy , Mandible Bone Holding Reduction Clamp Serrated With Ratchet (Basic Bone Plating Instrument Set) , Straight Cutting Pliers - 6 Length, 2/3 Mm Wide Tip(Basic Bone Plating Instrument Set) , Bone Elevator Hoffmann Type 6 Mm (Basic Bone Plating Instrument Set) , Bone Elevator Hoffmann Type 8 Mm(Basic Bone Plating Instrument Set) , Fine Osteotome - Curved 2 Mm (For Rhinoplasty) , Fine Osteotome - Curved 4 Mm (For Rhinoplasty) , Fine Osteotome - Straight 2 Mm (For Rhinoplasty) , Fine Osteotome - Straight 4 Mm(For Rhinoplasty) , Neiverts Guarded Osteotome - Right (For Rhinoplasty) , Neiverts Guarded Osteotome - Left (For Rhinoplasty) , Guarded Osteotome Straight (For Rhinoplasty) , Guarded Osteotome Curved (For Rhinoplasty) , Joseph Bone Rasp - Cross-Serrated (For Rhinoplasty) , Joseph Bone Rasp - Double Action (For Rhinoplasty) , Cottles Glabella Rasp (For Rhinoplasty) , Mcindoes Double-Ended Periosteal Elevator (For Rhinoplasty) , Aufritch Nasal Dorsal Retractor (For Rhinoplasty) , Aschs Septal Forceps (For Rhinoplasty) , Walshams Nasal Forceps - Adult (For Rhinoplasty) , Walshams Nasal Forceps- Paediatric (For Rhinoplasty) , Tessier Osteotomes Straight 2 Mm(For Osteotomy) , Tessier Osteotomes Straight 5 Mm (For Osteotomy) , Tessier Osteotomes Straight 10Mm (For Osteotomy) , Tessier Osteotomes Straight 15 Mm (For Osteotomy) , Tessier Osteotomes Curved 2 Mm(For Osteotomy) , Tessier Osteotomes Curved 5 Mm(For Osteotomy) , Tessier Osteotomes Curved 10 Mm (For Osteotomy) , Fine Chisels Straight 2 Mm (For Osteotomy) , Fine Chisels Straight 4 Mm (For Osteotomy) , Fine Chisels Straight 6 Mm (For Osteotomy) , Fine Chisels Curved 2 Mm (For Osteotomy) , Fine Chisels Curved 4 Mm (For Osteotomy) , Fine Chisels Curved 6 Mm (For Osteotomy) , Pterygoid Osteotome 5 Mm (For Osteotomy) , Pterygoid Osteotome 10 Mm (For Osteotomy) , Pterygoid Osteotome Curved (Lefort) 1Mm, 2Mm , Bone Cutting Forceps Double Action Curved (For Osteotomy) , Arm Boardcompatible With Dr Lite Model 7000 Sb , Arm Rest For Lateral Position Compatible With Dr Lite Model 7000 Sb , Silicon Head Ring - Adult , Silicon Head Ring - Pediatrics , Fine Tendon Hook , Cats Paw Skin Retractor. , Roberts Artery Forceps , Babcock 6 Tissue Holding Forceps , Pds Plate , Russian Artery Forceps , Microinstrument Set Sterlising Case ( 20 Cm X 12 Cm) , Vessel Loop (Fine) , Micro Clip Applicator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 34
Puducherry View Result →
3.
Shipping #11297652 AOC
Bids Are invited for Main Engine And Accesories - Ng211000 , Gearbox And Accesories - Ng252000 , Stern Gear Items And Accesories - Ng251000 , Steering System Equipment And Accesories - Ng414000 , Main Dg Set And Accessories - Ng221000 , Emergency Dg Set And Accessories - Ng224100 , Integrated Machinery Control System Imcs - Ng270000 , Compressed Air System Equipment - Ng296000 , Fuel Oil Transfer Storage And Treatment System Equipment - Ng283000 , Lub Oil Transfer Service And Treatment System Equipment - Ng284000 , Sludge And Waste Oil Disposal System Equipments - Ng288000 , Toilet And Urinal System - Ng455000 , Bilge Bilge And Ballast System Equipment - Ng431000 , Firemain And Sprinkling Pump - Ng441100 , Fresh Water System Equipment - Ng452000 , Aircraft Fuelling System Avcat Equipment - Ng793000 , Portable Pumps And Bilge Eductors - Ng432000 , Semirotary Hand Pumps - Ng207103 , Fm200 Fixed Fire Fighting System - Ng444000 , Air Whistle And Accessories - Ng373600 , Engineering Workshop Tools - Ng929001 , Workshop Equipments Fittings - Ng496000 , Standard Tools - Ng929002 , Fire Fighting Appliances - Ng407404 , Oil And Grease - Ng901200 , Loose Tanks - Ng200080 , Consumable Miscellaneous Items Accessories And Sealants - Ng200020 , Refrigeration Plant For Ngopv - Ng901300 , Air Conditioning Plant For Ngopv - Ng901400 , Nbcd Outfit Allowance List - Ng407400 , Engg First Allowance List - Ng407406 , Productivity Improvement Equipment And Inspection Tools - Ng497000 , Magazine Fire Fighting System Mffs - Ng445000 , Water Mist System - Ng444500 , Tally And Starting Stopping Instruction Plates - Ng209500 , Tally Plates - Ng209501 , List Of Tally Plates For Ngopv - 2095000009 Total Quantity : 259
Contract Date: Ref. Documents Contract Value : ₹ 24.97 Lakh
Boards / Undertakings / PSU No of Bidders 1
Goa View Result →
Gujarat View Result →
5.
Power #11237449 AOC
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Residential; 2755929; Service Provider - Operation And Maintenance Of Water Treatment Plant Having One Flash Mixer With Agitator And Clarification Tank Having Rotating Bridge, Two Filter Beds, One Chemical House Having Two Alum Solution Tanks With Agitator, 132 Kl Overhead Tank, One Sump Well And Its Pumps Motor Filter Water Sump And 1To 3 Nos Pumps And Motor Upto 30 Hp, 2 Nos Pumps And Motor Upto 60Hp, And All Other Accessories Including Cleaning Of Clarification Tank , Filter Water Reservoir Tank 2 Nos With Site Pit And Out Side Back Wash Pit Including Cost Of All Labour T&P , Cost Of All Consumables Such As Grease, Lubricating Oil, Mobil Oil, Gear Oil, Packing Seat, Coupling Of Gear Box , Gland Dori Etc. Required For Proper Completion Of Work. Work Includes The Up Keeping And Cleaning Of Surrounding Area Of Filteration Plant, Daily Collection Of Treated Water S Le From Filteration Plant And Submitting The Same To Chemistry Lab Of 2X210mw For Testing And Collection Of Report And Maintaning The Test Register. Work Also Includes The Watch & Ward Of The Filtration Plant Complax Round The Clock And Daily Cleaning/Dusting Of All Equipments Fixed At Filteration Plant As Pump, Motors, Main Switches, Starters Etc. And Disposal Of Debries Out Side The Periphery Of Filtration Plant. , Operation Of Tube Well Daily By A Suitable Experienced Operator Continuously Or In Different Intervals As Per Program Fixed By Engineer-In-Charge Including Opening And Closing Of Valves, Greasing Of Motor, Changing Of Fuse Wire Etc. As Required For Proper Running Of Tube Well/Pump Set Of 15 Hp Inside Power House Area (Store Area). , Operation Of Over Head Tank 190 Kl And Pump House Near Type-Ii Area (Near Ministrial Club) As Required Including All Valves, Indicator And Cleaning Of Stairs, Structure And Area Inside Boundary Wall And Its Watch And Ward 24 Hrs. Daily. , Operation Of Pump Set Of 15 Hp And Tubewell Near Inter College Area (Type Iii) As Required Three Times Daily , Re-Winding Of Ac Mono Block, 3 Phase Motor, With Best Quality Insulating Material, Including All Charges Of Dismantling Of Motor And Its Pertaining Items Such As Suction And Delivery Pipes If Required And Stacking In Departmental Store And Including All Charges For Re Fixing Of Motor And Also Fixing Of Motor At Any Tube Well/ Pump House As Per Direction Of Engineer- In -Charge, Including Supply And Fixing Of All Material Like Nut, Bolt, Washer Packing Welding Grinding Of Shaft Etc. And Testing Of Motor Etc. All Complete . All Waste Material Like Burnt Wire Shall Be The Property Of The Contractor.3 Hp To 5 Hp , 7.5 Hp To 10 Hp , 15 Hp , Same As Item No 5 But Rewinding Of Submersible Motor Of Following Pump.1 Hp To 3 Hp , 5 Hp To 7.5 Hp , Repairing Of Following Submersible Pump Including All Charges Of Dismantling Pump And Its Purchasing Item Such As T&P Etc.1 Hp To 3 Hp , 5 Hp To 7.5 Hp , Providing & Fixing Of Bearings S.K.F. Or Nbc (From Main Distributor Produced With Orignal Cash Memo) Equivalent Make Including Removing Of Bearing From Pump/Motor Including Cost Of All Labours Material, T&P Etc. All Complete, 3 Hp To 5 Hp , 7.5 Hp To 10 Hp , 15 Hp , Supply & Filling Of 16/30 Gauge Approved Ram Nager Betwa Sand In Filter Bed Of Filtration Plant Situated In Colony Area Of Parichha Thermal Project, Parichha. , Taking Out Of Gear Box Fixed A Colony Water Treatment Plant Rotating Bridge, Opening Its Nut & Bolts, Replacement Of Gear Oil Big Oil Seal No. (Kds/1335/P25 Die 175.3), Small Oil Seal No. Kds-2705, Including Packing , Oiling, Tightening Of Nut & Bolts And Assembling , Reerecting , Repairing The Same On Bridge With Flocculate Or Rotating Bridge Including Making Proper Alignment With All Required Arrangements Including The Cost Of All Material, T&P Etc. Required For Proper Completion Of Work. , Repair Of Warm Shaft And Gear Of Gearbox Of Suitable Make By Filling Of Required Type Of Material Over Gear And Shaft (Warm Shaft) And Cutting Grove, Thread Etc. Over If On The Lathe Machine As Per Specification. Including The Cost Of All Material, T&P, Carriage Etc. Required For Proper Completion Of Work. , Same As In Item No 17 Above But For Providing And Fixing Of Rotating Shaft , Providing Fixing Of Thrust Bearings S.K.F. Or Nbc Make Of Approved Quality For Reduction Gearbox Of Approved Make And Including Removal Of Old Bearing, Checking Of Bore Size Inner And Outer And Fixing It In Proper Alignment Including Cost Of All Labours Material, T&P Etc. All Complete, For Warm Shaft (Gear Shaft) , For Rotating Shaft. , Opening Out Complete Assembly Of 25 Hp Pump And Column Pipes Fitted Of The Pump House Near 450 Kl Over Head Take, Repairing And Re-Fixing Including Other Cost Of All Material Such As Rubber Bush Bearing, Nut Bolts And Gland Plate Etc. Machinery Work, Grinding, Cutting Threading, Transportations Etc. If Required And General Over Hauling Of Complete Pumps For Proper Completion Of Work. , Same As In No. 21 Above But For 30 Hp Pups Installed At Colony Filtration Plant. , Supply And Fixing Of The Following Starter L&T Or Other Equivalent Approved Make For Following Motors., 5 Hp Ml-1 , (7.5 Hp-10) Ml-2 , (15 Hp-20 Hp) Ml-2 , Above 20 To 25 Hp Ml-2 , Providing And Fixing Of Bush Of Approved Quality For 5 Hp To 15 Hp Pumps Including The Cost Of All Labour Involved For Opening Out & Re Fixing Of Bush In Pumps And T&P Etc. For Proper Completion Of Work. , Cleaning Of Over Head Tank 450 Kl Capacity Of 28 Meter Staging, Removing & Cleaning Of Silt Mud Sludge Etc, And Its Disposal At Ground With In 30 M Lead And Washing Inside The Tank Disinfecting The Bottom Surface And Walls Of The Tank With Water, Containing Bleaching Powder Including Supply Of All Material, T&P Etc. Required For Proper Completion Of Work. , Same As Above In Items No.28 But For 100 Kl To 190 Kl Capacity Over Head Tank Of 15 To 20 Meter Staging , Same As Above In Items No.28 But For 50 Kl To 150 Kl Capacity Under Ground Water Tank. , Supply And Fixing Of Gland Plate For Upto 10 Hp Water Pump Including Supply Of All Material, T&P Etc. Required For Proper Completion Of Work. , Repair Of Starter For Electric Motor, Opening Out , Choking , Changing Its Oil, Minor Parts Such As Nut, Bolts, Washer, Damaged Contacts And Other Parts Required Including Of All Material, T&P Etc. Required For Proper Completion Of Work.(Cost Of Relay Sale Be Paid Extra As Per Actual) , Providing And Fixing (150 Mm Dia To 200 Mm Dia) Non Return Value (Nrv) Isi Make Of Approved Quality Including Supply Of All Material, T&P Etc. Required For Proper Completion Of Work.(With Minimum 6 Months Guarantee.) , Providing And Fixing Brass/Gunmetal Impeller For 30 Hp Vlt/Turbine Pump Installed At Filtration Plant In Colony Area As Per Details Given Below And As Per S Le. Including Supply Of All Material Like Seal Ring Lock Vollet , Bearing Coupling , Bush Packing, Nut, Bolt And All Other Material, T&P Etc. Required For Proper Completion Of Work. Make Warthanth/ Jonston /Jyoti, Capacity 180 M3 /Hr , Speed 1460 Rpm Head , 30 M) , Providing And Fixing Of Impeller For The Following A.C. Mono Block Pumps Of Kirloskar Or Other Approved Make Including Supply Of All Material, T&P Etc. Required For Proper Completion Of Work. 5 Hp To 7.50 Hp , 10 Hp To 15 Hp , Providing And Fitting The Following Items Upto 15 Hp Ac Mono Block Pumping Set All Material, T&P Etc. Required For Proper Completion Of Work With Pvc Cooling Fan Of Approved Quality. , P/F Key Way Of Coupling , Re-Metallising Of Bearing Seat On Rotarshaft And Machining , P/F Terminal Plate. , P/F Cooling Fan Cover Of Motor. , P/F Terminal Box Of Motor. , Replacing Of Set Of Main Contact Of Starter (L&T) Make Of Isi Mark Including The Cost Of All Labour, Material And T&P Etc. Required For Proper Completion Of Work. , P/F Of Condenser Of 45 Mfd Isi Mark For 2 H.P. Single Phase 230 V.A.C. Starter. , Repairing Of Following Sluice Valve Including Opening Out And Refixing Of Sluice Valve Accessories Such As Nut, Bolt, Glane, Repaired Spendil Etc. Including The Cost Of Machinery Arrangement, Nut, Bolt, Packing Etc. All Complete.(Min. Three Months Guaranty) Filling Required Type Of Metal Over Spindle And Gutka For Spindle And Machining Cutting Threading Over Spindle Its Clearing Of Rod On Lath Machine And Gutka Fixing In Spendil Etc. Or Replacement With New One (Old Material Will Be Property Of Contractor) And Re-Fixing Of All Accessories Including All Cost And Labour Material, T&P Etc. Required For Proper Completion Of Work.80 Mm Dia , 100 Mm Dia , 150 Mm Dia , 200 Mm Dia , 250 Mm Dia , 300 Mm Dia To 400 Mm Dia , Filling Required Type Of Metal Over Sluice Valve Seat Both Sides Including Cutting , Grinding, Welding , Fixing , Of Nut , Bolt, Washer In Sluevalve If Required Including Of Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of Work.80 Mm Dia , 100 Mm To 125 Mm Dia , 150 Mm Dia To 250 Mm Dia , 300 Mm To 400 Mm Dia , Providing Cotton Mosquito Proof Net Covers To Water Beds Of Filter Plant Of Size Approximate 6.20X4.0X0.90 M Doubly Stitched From Inside And Outside With Minimum 25 Mm Wide Cotton Strip Including Cost Of Material Labour, Cartage, Taxes T&P Etc. Complete. , Hiring Charges Of Breaker Including Cost Of Tractor,Operator Deisel ,Lead Upto 50 Meter And All T&P Required For Execution Of Work. , Making Connection Of G.I. Distribution Branch With G.I. Main Of Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete : 25 To 40 Mm Nominal Bore , 50 To 80 Mm Nominal Bore , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc External Work, 15 Mm Dia , 20 Mm Dia , 25 Mm Dia , 40 Mm Dia , 50 Mm Dia , 65 Mm Dia , 80 Mm Dia , 100 Mm Dia , 125 Mm Dia , 150 Mm Dia , Same As Above In Item No. 5 But Without Excavation, 15 Mm Dia , 20 Mm Dia , Providing & Fixing Of G.I. Reducing Socket For ‘B Class Pipe Of Following Dia Including Supply Of All Material, Labour T&P Etc. Complete. 20 X 15 Mm Dia , 25 X 20 Mm Dia , 50 Mm To Any Smaller Size , 65 Mm To Any Smaller Size , 80 Mm To Any Smaller Size , 100 Mm To Any Smaller Size , Dismantling G.I. Pipes (External Work) Including Excavation And Refilling Trenches After Taking Out The Pipes, Manually/ By Mechanical Means Including Stacking Of Pipes Within 50 Metres Lead As Per Direction Of Engineer-In-Charge, 15 Mm To 40 Mm Nominal Bore , Above 40 Mm Nominal Bore , Supply And Fixing Of G.I. Tee For Class B Pipe Of Approved Quality Including Cost Of All Material Labour T&P Etc. Complete. 15 Mm Dia , 20 Mm Dia , 25 Mm Dia , 40 Mm Dia , 50 Mm Dia , 65 Mm Dia , 80 Mm Dia , 100 Mm Dia , Supply And Fixing G.I. Bend/Elbow Of Approved Quality Including Cost Of All Material Labour T&P Etc. Complete. 15 Mm Dia , 20 Mm Dia , 25 Mm Dia , 40 Mm Dia , 50 Mm Dia , 65 Mm Dia , 80 Mm Dia , 100 Mm Dia , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes;75 Mm Diameter , Same As Above But 110 Mproviding And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes;110 Mm Diameterm Outer Dia , Providing And Fixing 110X25 Mm Outer Dia Pvc Saddle Or 110 Mm Outer Dia Pvc Including Rubber Ring Including All Excavation, Refilling The Trenches Including Cost Of All Material Labour T&P Etc. , Providing And Fixing Pvc Flange Tail Piece For 110/90 Mm Outer Dia Pvc Pipe Line , Providing And Fixing C.I. Sluice Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertions Etc. (The Tail Pieces If Required Will Be Paid Separately) :100 Mm Diameter Class I , 150 Mm Diameter Class I , Providing And Fixing G.I. Union In Existing G.I. Pipe Line, Cutting And Threading The Pipe And Making Long Screws Including Excavation, Refilling The Earth Or Cutting Of Wall And Making Good The Same Complete Wherever Required : 15 Mm Nominal Bore. , 20 Mm Nominal Bore. , 25 Mm Nominal Bore. , 50 Mm Nominal Bore. , Repair Of Leakage In G.I./C.I./M.S./Pvc Pipe Line Of 20 Mm Dia To 200 Mm Dia Including Necessary Excavation Dismentalling And Relaying Of Pipe And Refilling Of Trenches Also Including Supply And Replacement Of Nuts/Bolts Washes Socket Flange Tail Piece, Spun Yard Safeda Welding Etc. Complete. 20 Mm Dia To 40 Mm Dia Pipe Line , 50 To 125 Mm Dia , 150 To 200 Mm Dia , Repair Of Reflex Valve By Removing It From Pipe Line Or Section And Of Pumping Set From Any Tube Well Opening Its Nuts And Bolts Replacing The Rubber/Leather Washer Making It Water Tight By Lightening Of Nuts And Bolts Reerecting/Refixing The Same In Pipe Line On In Tube Well Suction And Including Cost Of Job For Diameter Ranging From 100 Mm To 200 Mm Dia Including Taking Out Suction Pipe Of Required. , Supplying And Fixing Of G.I. Tee For Class B Pipe Of Approved Quality Including Cost Of All Material Labour T&P Etc. Complete.40X40x15/20 Mm Dia , 50X50x15/20 Mm Dia , Providing And Fixing 100 Mm Dia C.I. N.R.V. I.S.I. Marked Approved Quality Including Cost Of Al Labour, T&P Etc. Required For Proper Completion Of Work , Supply Of D Joint Of Following Dia Including Cost, Cartage Etc. Complete. 65Mm To 80 Mm Dia , 100 Mm Dia , 150 Mm Dia , Dismantling Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50Metres Lead As Per Direction Of Engineer-In-Charge : Water Bound Macadam Road , Bituminous Road , Cleaning Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared. , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) : 25 Mm Nominal Bore , 50 Mm Nominal Bore , 65 Mm Nominal Bore , 80 Mm Nominal Bore , Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete,15 Mm Nominal Bore , 20 Mm Nominal Bore , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means Over Areas (Exceeding 30Cm In Depth. 1.5M In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50M And Lift Upto 1.5M, Disposed Earth To Be Levelled And Neatly Dressed. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete: , 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Fine Sand) , Providing And Fixing Brass Stop Cock Of Approved Quality Weight Not Less Than 400 Gram. 15 Mm Nominal Bore. , Attending To Petty Maintenance Services Like Plumbing, Welding, Carpenting, Mason With One Carpenter Plumber Or Mason And One Helper Per Hour , Dewatering By Pump Of Capacity 5/7.5 Hp With 4 Meter Sump And 50 Meter Pump Length Including Installation, Operator/Helper, Desiel/Fuel Etc As Per Direction Of Engineer In Charge.
Contract Date: Ref. Documents Contract Value : ₹ 36.48 Lakh
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
6.
Educational and Research Institute #11209125 AOC
Bids Are invited for Student And Office Stationary Note Books A4 Size 160 Pages Minimum Quantity - A4 Size 160 Pages Good Quality Paper With 56 Gsm To 60 Gsm Paper , Gel Or Ink Pen Minimum Quantity - Blue Ink Smooth Writing , Pencil Minimum Quantity - Hb Pencil Good Quality Wood And Branded , Geometry Box - Standard Metal Geometry Box With Compass Set , Atlas - School Atlas Latest Edition , Map For Practice - India Or World Or Rajasthan Outline Map For Practice , Eraser - Non Dust Soft Eraser , Graph Notebook - A4 Graph Notebook , Drawing Book - A4 Drawing Book 36 Pages , Water Colour Or Colour Pencil Or Crayon - 12 Colour Set , Practical Notebook - A4 Practical Record Notebook , Activity Book - Student Activity Workbook , Scale - Plastic Scale 30 Cm , Identity Card - Laminated School Id Card , School Dairy - Student Diary With School Rules Pages , Office Order Book - With School Name , Visiter Register - Good Quality Paper With 70 Gsm Paper Or Above Printed , Staf Movement Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Cash Book Canvas Bound Register 300 Double Sided Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Ledger Account Spacious Canvas Bound 300 Double Sided Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Stock Register Non Consumable 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Stock Register Consumable 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Daily Consumption Register Of Mess A3 Size Canvas Binding 373 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Ltc Claim Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Assests Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Distribution Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Mess Visitor Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Medical Bill With Form A 100 Piece - Good Quality Paper With 70 Gsm Paper Or Above Printed , M And R Complin Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Casual Leave Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Children Education Allowance Register 100 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Furniture Distribution Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Character Certificate Ledger Or White 100 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Bill Entry Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Pay Bill Register 300 Pages A3 Size - Good Quality Paper With 70 Gsm Paper Or Above Printed , Rulled Register 120 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Class Attendance Register 26 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Advance Adjustment Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Gate Pass Slip Pad Printed Name Of Emrs 100 Pc In Pad - Good Quality Paper With 70 Gsm Paper Or Above Printed , Hostel Outing Or Incoming Student Movement Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Exam Duty Chart Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , House Attendance Register 48 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Mess Attendance Register 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Students Diary 156 Pges A5 Size - Good Quality Paper With 70 Gsm Paper Or Above Printed , Monitor Diary 240 Pages A5 Size - Good Quality Paper With 70 Gsm Paper Or Above Printed , Pt Attendance Register 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Morning Prayer Attendance Register 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , House Meeting Register 48 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Hostel Night Roll Call Register 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Teachers Dairy As Per Emrs Norms 200 Pages A4 Size - Good Quality Paper With 70 Gsm Paper Or Above Printed , Period Wise Daily Teacher Diary 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Arrangment Duty Register 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Remedial Study Register 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Supervise Study Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Register Of Student Non Consumable Items Bedding 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Register Of Student Non Consumable Items Daily Use 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Register Of Student Non Consumable Items Utelsils 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Register Of Student Non Consumable Items School Uniform 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Register Of Student Non Consumable Items Stationary 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Student Health Book - Good Quality Paper With 70 Gsm Paper Or Above Printed , Girls Monthly Record Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Medical Consumble Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Medical Ground Leave Record Register 100 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Hospital Visit Register 100 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Cleaning Record Register 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Daily Medicine Treatment Record Canvas Bound Register 300 Double Sided Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Student Medicine Issue Register Spacious Cavas Bound Register 300 Double Sided Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Doctor Visit Record Register - Good Quality Paper With 70 Gsm Paper Or Above Printed , Food Testing Register 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Library Issue Card 280 Gsm Ivory - Good Quality Paper With 70 Gsm Paper Or Above Printed , Libarary Book Issue Register For Student 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Student Text Book Issue Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , News Paper And Periodicals Register 200 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , File Tag Cotton - Good Quality , Fevi Gum Sq 200 Ml Per Pcs - Camlin Or Kores Or Branded , Rubber Band Big Size 400Gm Pkt - Good Quality , Scissors 08 Inch Smooth Cutting Multi Use - Munnix Or Branded , Stepler Small - Munnix Or Branded , Steplers Big - Munnix Or Branded , Packing Clear Tape 2 Inch 6Pcs In 1 Rool - Wonder Or Branded 100 Mtr , Packing Clear Tape 1 Inch 12Pcs In 1 Rool - Wonder Or Branded 100 Mtr , I Pins 50 Gram In Pkt - Gorrilla Or Oddy Or Branded , Globe Zebra Alpin T - Gorrilla Or Oddy Or Branded , Highlighter 5 Clr In Set - Camlin Or Kores Or Branded , Name Plate Holder - Good Quality , Peaper Punch Two Hole - Munnix Or Branded , Peaper Punch One Hole - Munnix Or Branded , Paper Tag Sticker 6Clr In A Pckt - Oddy Or 3M Or Silimar Brand , Tape Dispencer Half Or 1 Inch - Premier Or Oddy Or Similar Brand , Tape Dispencer 2 Or 3 Inch - Premier Or Oddy Or Similar Brand , Exam Copy 4 Page - 56 Gsm Or Above Printed With School Name , Exam Copy 8 Page - 56 Gsm Or Above Printed With School Name , Exam Copy 12 Page - 56 Gsm Or Above Printed With School Name , Exam Copy 16 Page - 56 Gsm Or Above Printed With School Name , Anser Sheet Suplement - 56 Gsm Or Above Printed With School Name , Practical Exam Copy - Good Quality , Student Home Visit Register As Per Emrs 50 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Student Acadmic Record Register By House Master 50 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , House Wise Student Counsling Register 100 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Students Profile Register House Wise 50 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Hostel Out Going Or Incoming Student Moving Register 50 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , Transparent File Folder A4 Size - L Type Folder With Good Folder , Class Absentee Dairy 300 Pages - Good Quality Paper With 70 Gsm Paper Or Above Printed , White Board Marker Bold Writing Refillable Camlin 10 Pic In Pkt - Camlin Or Kores Or Branded , Refilable Ink Camlin 50Ml Botel - Camlin Or Kores Or Branded , Rim A4 Size 70 Gsm - Jk Or Built Or Similar Quality Not Lower , Glossy Paper A4 50 Paper In 1 Pkt - Kent Or Oddy Or Similar , All Colour A4 Size Rim - Jk Or Built Or Similar Quality Not Lower , Chart Paper All Colour - Jk Or Built Or Similar Quality Not Lower , 12 Inch Stretch Wrapping Film Roll - Premier Or Oddy Or Similar Brand , Class Room Observation Tool Dairy As Per Emrs - Good Quality Paper With 70 Gsm Paper Or Above Printed Total Quantity : 72552
Contract Date: Ref. Documents Contract Value : ₹ 9.72 Lakh
Boards / Undertakings / PSU No of Bidders 5
Rajasthan View Result →
7.
Power #11168099 Price Bid
Tender for Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Stay Wire 7/10 Swg , Plain Cement Concrete Pole 8.5 Mtr , Plain Cement Concrete Pole 11 Mtr , St Pole 13 M- Is 410 Sp- 72 , Stay Set 16X1800 , Acsr Dog Conductor , Acsr Weasel Conductor , A.B.Cab. L.T. (3X95)+ (1X70)+ (1X16)Sq.Mm , A.B.Cab. L.T. (3X120) , 11 Kv H.T.Xlpe Cable 3X185sq.Mm , Lt Abc 3X50+1X35+1X16 Sq.Mm , 33 Kv H.T. Xlpe Cable 3X300 Sq.Mm. , Earth Rod 2540X20 Mm , 11 Kv completion Poly. Disc Insulator 45 Kn , 11 Kv Composite Polymer Pin Insulator , 33 Kv Polymer Disc Insulator (B&S) 70 Kn , 33 Kv Composite Polymer Pin Insulator , 33 Kv Disc Fitting (B&S) Dog/Racoon 70 Kn , Ms Channel 100X50 Mm , 33 Kv Cross-Arm 100X50 Mm V-Type , Disc Fitting 45 Kn (T&C) , Gi Wire 4Mm/ 8 Swg , Gi Wire 5 Mm/6 Swg , 11 Kv G.I. X-Arm Angle 65X65x6 Mm V-Type , 33 Kv Gi Pin With Nut , M.S. Guarding Angle 1.8Mtr , 33 Kv Xlpe Cable Box 3X300 , G.I. Bracing Angle 65X65x6x2700mm , Droper Channel 100X50mm , Top Channel (125X65x65x6mm) 33 Kv Line , Stay Set Gi 20X1800 Mm , 3-Ph Distribution Box , V Type X Arm Angle , 11 Kv Vcb Outgoing , 11 Kv Cable Box O/D 3X185sq.Mm , M.S. Angle 75X75x6 Mm , M.S. Angle 65X65x6 Mm , Ms Channel 125X65 Mm , 11 Kv Ct/Pt Ctr200/5Amp , 11 Kv Metering Cubical , Erection And Fixing Of The Following Materials As Per Relevant Respo/Departmental Norms And Specifications, Including Proper Installation, Alignment, Tightening, And Commissioning At Site. The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration, Along With Responsibility Of The Contractor For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Directions Of Engineer-In-Charge , Stay Wire 7/10 Swg , Stay Set 16X1800 , Stay Set Gi 20X1800 Mm , 11 Kv completion Poly. Disc Insulator 45 Kn , M.S. Angle 65X65x6 Mm , 11 Kv Composite Polymer Pin Insulator , Ms Channel 100X50 Mm , Lt Abc 3X50+1X35+1X16 Sq.Mm , 33 Kv Polymer Disc Insulator (B&S) 70 Kn , 33 Kv Cross-Arm 100X50 Mm V-Type , 33 Kv Disc Fitting (B&S) Dog/Racoon 70 Kn , Disc Fitting 45 Kn (T&C) , 11 Kv G.I. X-Arm Angle 65X65x6 Mm V-Type , 33 Kv Gi Pin With Nut , M.S. Guarding Angle 1.8Mtr , 33 Kv Composite Polymer Pin Insulator , G.I. Bracing Angle 65X65x6x2700mm , Droper Channel 100X50mm , Top Channel (125X65x65x6mm) 33 Kv Line , Stay Set Gi 20X1800 Mm , 3-Ph Distribution Box , V Type X Arm Angle , 11 Kv Vcb Outgoing , Ms Angle 75X75x6 Mm , Ms Channel 125X65 Mm , 11 Kv Ct/Pt Ctr200/5Amp , 11 Kv Metering Cubical , Erection & Fixing Of Single Pole Structure Of Following Pole Of 11 Kv Line Along With X-Arm And Pin Insulator After Digging Of Suitable Pits Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Stone Pad, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Plain Cement Concrete Pole 8.5 Mtrs , Plain Cement Concrete Pole 11 Mtrs , St Pole 13 Mtrs , Erection Of 11Kv Double-Pole Structure After Digging Of Suitable Pits On Following Pole With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 11 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 50X6 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Plain Cement Concrete Pole 8.5 Mtrs , Plain Cement Concrete Pole 11 Mtrs , Erection Of 33Kv Double-Pole Structure After Digging Of Suitable Pits On St Pole 13 Mtrs With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 65X8 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Erection Of 33Kv Tri-Pole Structure After Digging Of Suitable Pits On St Pole 13 Mtrs With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 65X8 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Erection Of 33Kv Four-Pole Structure After Digging Of Suitable Pits On St Pole 13 Mtrs With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 65X8 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Erection & Fixing Of 33Kv St Pole 13 Mtrs With Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 33 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing/Norms By Providing All Clamps Made Of M.S. Flat Of Size 65X8 Mm With Proper Size Nuts And Bolts And Stone Pad With Jumpering Etc Work, And As Per Direction Of Site Incharge. All Clamp & Nut Bolt Will Be Provided By Contractor. , Grouting Of Following St/Pcc Supports In cement concrete 1:3:6 (Cement, Sand & 40Mm Brick Ballast) Grouting Will Be Done In The Block Of Size (450X450)Mm X1/6Th Of Full Length Of The Support, Up To Ground Level, 300Mm Plinth Above The Ground Level With cement concrete 1:3:6 (Cement, Core Sand And Stone Grit) With Mufting As Per Drawing, Work Includes Back Filling & Proper Ramming By Providing All Required Grouting Materials, As Per Direction Of Site Incharge. , Plain Cement Concrete Pole 8.5 , Plain Cement Concrete Pole 11 Mtr. Long , Stp 13 Mtrs Long , Construction Of T/F Plinth Suitable For 160/250/400 Kva T/F (Size 2X2x1.5 Mtr) After Digging Of Earth And Construction With 14 Bag Cement, Fine Sand, Coarse.Sand, Brick Ballast, 1St Class Bricks 6000, Stone Ballast (40Mm), Ms Channel 125X65mm (54 Kg), Ms Twisted Bar 20 Mm (50 Kg) & Ramming The Same, Including Cost Of All Material & Labour, As Per Direction Of Site Incharge. (All Matreial/ Labour/ T&P Use For Construction Of Plinth Will Be Provided By Contractor) , Safe Dismantling, Loading, Transportation, Unloading, Re-Erection, Testing And Commissioning Of 25/63/100/250 Kva Distribution Transformers Of 11/0.4 Kv Rating, Including Complete Shifting From Existing Location To New Site As Per Departmental Instructions; The Scope Of Work Shall Include Disconnection Of Ht/Lt Lines, Removal And Refixing Of All Associated Technical Accessories Such As Go Switch Set, Drop Out Fuses, Lightning Arrestors, Ht/Lt Bushings, Earthing Arrangements, Breather, Conservator Connections, Oil Level Indicators, Silica Gel, Protection Devices And All Allied Fittings; Proper Handling Using Suitable Capacity Crane/Chain Pulley Block, Providing Required T&P, Skilled Labour, Safety Measures To Avoid Any Mechanical/Electrical Damage, Checking Of Transformer Oil Level And Filtration If Required, Tightening Of All Connections, Re-Alignment, Replacement Of Minor Damaged Components, And Ensuring Proper Earthing And Guarding; Including Carriage Of Transformer And Accessories On Suitable Vehicle Over All Types Of Roads, Complete Installation On Plinth/Structure, Connection With Existing Network, Testing Of Ir Value, Ratio Test And Trial Run For Satisfactory Operation, Strictly As Per Relevant Standards And Direction Of Engineer-In-Charge; The Rate Shall Be Inclusive Of All Labour, Tools & Plants, Transportation, Insurance, Loading-Unloading, And Incidental Charges Required To Complete The Work In All Respects. , 25 Kva Transformer On Double Pole , 63 Kva Transformer On Double Pole , 100 Kva Transformer On Double Pole , 250 Kva Transformer On Plinth , Complete Earthing System For 25 Kva, 63 Kva And 100 Kva Distribution Transformers, Comprising Of Supply And Installation Of Suitable Size G.I./Copper Earth Electrodes (Pipe/Rod Type Of Standard Length) Driven Or Installed In Earth Pit Of Required Dimensions, Including Excavation And Backfilling With Layers Of Charcoal/Coke And Common Salt, Watering Arrangement With G.I. Pipe And Funnel With Wire Mesh, And Construction Of Brick Masonry Chamber With Ci/Rcc Cover; Providing And Laying Of G.I. Strip/Wire Of Required Size From Transformer Body, Neutral And Lightning Arrester (If Applicable) To Earth Electrode, Including All Connections With Nuts, Bolts, Washers, Lugs And Proper Clamping, Testing Of Earth Resistance And Ensuring Value Within Permissible Limits As Per Relevant Standards; The Scope Includes All Materials Such As G.I. Pipe/Rod, G.I. Strip/Wire, Charcoal, Salt, Bricks, Cement, Sand, Ci/Rcc Cover, Etc., And All Labour, Excavation, Refilling, Watering, Transportation, Handling, Testing, And All Tools & Plants (T&P) Required For Complete And Satisfactory Installation As Per Respo/Standard Specifications And Direction Of Engineer-In-Charge. , Providing And Installation Of Maintenance-Free Chemical Earthing System For 250 Kva Distribution Transformer, Comprising Of Supply And Erection Of Approved Make Chemical Earth Electrode (Gi/Copper Bonded, Of Standard Length And Diameter) Installed In Drilled/Bored Hole Of Required Depth In All Types Of Soil, Including Backfilling With Highly Conductive Earthing Compound (Bfc/Graphite Based) To Achieve Low And Stable Earth Resistance; Providing Separate And Distinct Earthing For Transformer Body, Neutral And Lightning Arrester (If Applicable) Using Required Number Of Chemical Electrodes Interconnected Where Necessary; Construction Of Earth Pit Chamber With Brick Masonry, Plastering And Heavy Duty Ci/Rcc Cover With Provision For Watering/Inspection; Providing And Laying Of Gi Strip (E.G., 50×6 Mm) Or Suitable Copper Strip From Transformer Body, Neutral Point And La To Respective Earth Electrodes, Including All Connections With Nuts, Bolts, Washers, Lugs, Clamps And Anti-Corrosive Treatment; Testing Of Earth Resistance To Ensure Values Within Permissible Limits As Per Is/Respo Standards And Ensuring Long-Term Stability Without Frequent Maintenance; The Scope Includes Cost Of All Materials Such As Chemical Electrodes, Backfill Compound, Gi/Copper Strips, Bricks, Cement, Sand, Covers, Water, Etc., And All Labour, Drilling, Installation, Refilling, Carriage, Loading/Unloading, Handling, Testing, Commissioning And All Tools & Plants (T&P) Required For Complete And Satisfactory Execution Of Work As Per Standard Specifications And Direction Of Engineer-In-Charge. , Construction Of Safety Fencing (Ms) Size 3X3x2 Mtr. For Dist. Transformer 11/0.4 Kv Sub Station, With Supply Of Material Required For Ms Fencing (50X50x3 Mm) M.S. Wire Mesh Construction Utilizing Vertical Post Duly Grouted/Fitted In Ground/On Floor. Horizontal Angle/T-Iron To Be Fitted On Vertical Posts. Pickets (If Required) Fitted To Rail And Gate To Facilitate Entry And Exit. The Vertical Posts/Horizontal Post Shall Be Made Of M.S. Angle 65X65x6mm. Such Post Shall Be Kept Preferably At Distance Of 800-1000 Mm. And Shall Be Grounded With cement concrete Ratio 1:4:8. The Length Of Vertical Post Shall Be Sufficient To Take Care Of Fencing As Requirement At Site, And As Per Direction Of Site Incharge. (All Matreial/ Labour/ T&P Use For Construction Of Plinth Will Be Provided By Contractor) , Providing, Installing, Testing And Commissioning Of Tailless Unit Suitable For 250 Kva Distribution Transformer, Including Dismantling Of Existing Tail Connections (If Any), Supply And Fixing Of Required Lt/Ht Connectors, Busbar Arrangements, Insulated Sleeves, And Necessary Termination Accessories; Complete Modification Of Transformer Lt Side To Tailless Configuration Ensuring Proper Phase Segregation, Insulation And Mechanical Strength; Including Providing And Fixing Of Suitable Size Aluminium/Copper Lugs, Glands, Ferrules, Heat Shrink Sleeves, Pvc Insulation Tape, Nut-Bolts, Washers And All Jointing Materials As Required; Making Proper Cable Terminations, Dressing And Clamping Of Cables With Gi Clamps; Providing And Ensuring Effective Earthing Of The Tailless Unit With Gi Strip/Wire And Connecting To Existing Earthing System; Including Painting Of Modified Portion With Suitable Anti-Corrosive Paint; Complete Testing For Continuity, Insulation Resistance And Proper Load Transfer; The Work Shall Be Carried Out As Per Relevant Is Standards, Respo/Departmental Specifications And As Directed By Engineer-In-Charge; The Rate Shall Include Cost Of All Materials, Labour, Tools & Plants (T&P), Handling, Loading/Unloading, Transportation, And All Incidental Works Required To Complete The Job In All Respects. , Providing, Laying, Jointing And Commissioning Of 140/200 Mm Dia (Od) Pn-4, Pe-80 Grade Uv Stabilized Hdpe Pipe In 6.0 Mtr Standard Length By Trenchless (Hdd/Drilling) Method For Underground Cable Protection, Including Excavation Of Suitable Size Launching And Receiving Pits, Alignment And Preparation Of Bore Path, Drilling, Reaming And Insertion/Pulling Of Hdpe Pipe, Jointing By Butt Fusion/Electrofusion With All Necessary Fittings Such As Couplers, Bends And End Caps, Ensuring Proper Alignment And Leak-Proof Joints; Including Providing And Laying Of Warning Tape, Route Markers And Identification System; Complete With All Required Tools & Plants (T&P) Such As Hdd Machine, Drilling Machine, Compressor, Generator, Welding Machine, Including All Consumables, Loading/Unloading, Handling And Safe Stacking At Site; Including Dewatering (If Required), Traffic Control, Barricading And Safety Measures; Also Including Restoration Of Road, Footpath, Drain Or Any Other Surface Under Row (Right Of Way) Conditions To Original Condition And Disposal Of Surplus Earth/Muck; Complete In All Respects As Per Relevant Is Standards, Respo/Departmental Norms And Direction Of Engineer-In-Charge, With All Material, Labour, T&P, Transportation And Incidental Charges Included In The Rate. (Rate Will Be Charge As Per Actual Length Of Work) , 200 Mm Dia For 33 Kv Line , 140 Mm Dia For 11 Kv Line , Laying Of Following Cable Undergound Into Hdpe Pipe, Spare Cable Shall Be Left In The Loop Shape At Both Ends As Per Respo/Norms, As Per Direction Of Site Incharge.(Rate Will Be Charge As Per Actual Length Of Work) , 11 Kv H.T.Xlpe Cable 3X185sq.Mm , 33 Kv H.T. Xlpe Cable 3X300 Sq.Mm. , Manually Digging Excavation Of Trench Of Size 0.50 M Width × 1.00 M Depth In All Types Of Soil Including Dressing, Levelling And Disposal Of Surplus Excavated Earth Within Specified Lead As Per Respo/Drawing Norms And Direction Of Engineer-In-Charge; Supplying And Laying Of Brick Masonry (Class Designated) In Cement Mortar For Side Protection, Providing And Filling Of Sand Cushioning At Bottom And Around The Laid Cable, Followed By Laying Of Plain Cement Concrete (Plain Cement Concrete) Of Required Grade For Base And Protective Covering Over Trench; Thereafter, Placing And Proper Alignment Of Xlpe Cable Within The Complete Trench, And Covering The Trench With Brick/Cc Slab Protection Including Backfilling With Excavated Earth In Layers, Watering, Ramming And Proper Compaction Complete In All Respects; The Scope Of Work Includes Cost Of All Labour, Materials (Bricks, Sand, Cement, Aggregates, Water Etc.), Handling, Loading/Unloading, Carriage, And All Tools & Plants (T&P) Required For Excavation, Laying And Finishing Works, With All Safety Precautions, As Per Standard Specifications And Directions Of Site In-Charge. (The Firm Will Be Fully Responsible For This Work And Taking Necessary Permission), As Per Direction Of Site Incharge (Rate Will Be Charge As Per Actual Length Of Work). , Laying And Installation Of 11 Kv Grade, 3 Core × 185 Sq.Mm Xlpe Insulated, Armoured Aluminium Conductor Cable In Underground Trench In Double Circuit Formation, Including Careful Handling, Dressing And Alignment Of Cable Along The Route As Per Respo/Drawing Norms And Direction Of Engineer-In-Charge; Laying Of Cable Over Prepared Sand Bed, Maintaining Proper Spacing Between Circuits, And Ensuring Identification And Phase Marking; Providing Extra Length Of Cable At Both Ends In Loop Formation For Future Jointing/Termination (Spare Cable To Be Left In Loop Shape At Each End) As Specified; Covering Of Cable With Sand Cushioning, Protective Bricks/Tiles/Cc Slabs And Backfilling Of Trench With Excavated Earth In Layers, Watering, Ramming And Proper Compaction Complete In All Respects; Including Supply Of All Consumables Such As Sand, Bricks, Cable Markers, Route Indicators, Etc., And All Labour, Loading/Unloading, Carriage, Handling Charges, Testing Prior To Commissioning, And All Tools & Plants (T&P) Required For Safe And Proper Execution Of Work As Per Standard Specifications And Site Instructions. , Providing & Fixing Of G.I. Pipe 6Dia Class-B Over 11Kv/33 Kv Xlpe Cable Before Mounting The Cable At Double Pole. The Work Includes Fitting Of Clamps, Sealing Of Top And Bottom Of Pipe And One End Of Pipe Is To Be Burried Under Earth About 500Mm Earch Including Mounting And Clamping The Cable On Double Pole Structure And Making Connection With Overhead Line At Both Ends, As Per Direction Of Site Incharge. , Making And Filling Of 11Kv/33Kv Cable Jointing Kit, Indoor/Outdoor Type, After Duly Plumbing And Taping Of Suitable Xlpe Cable, Providing, Fixing And Crimping Of Proper Size Good Quality Lugs, Including Cost Of Lugs And Tape Etc., As Per Respo Norms, And As Per Direction Of Site Incharge. , 11Kv Cable Jointing Kit 3X185 Sq.Mm. , 33Kv Cable Jointing Kit 3X300 Sq.Mm. , Laying , Stringing And Final Sagging Of Acsr Weasel Conductor, As Per Respo/ Drawing Norms And As Per Direction Of Site Incharge. , Laying , Stringing And Final Sagging Of Acsr Dog Conductor, As Per Respo/ Drawing Norms And As Per Direction Of Site Incharge. , Laying And Stringing Of Following Lt Aerial Bunched Cable (Abc) On St/Pcc Poles, Including Proper Hanging, Dressing And Fixing Of Cable With Necessary Clamps, Supports, Nuts & Bolts (To Be Arranged By The Contractor), Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Lifting, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Lt Aerial Bunched Cable (Abc) (3×95 + 1×70 + 1×16 Sq.Mm) , Lt Aerial Bunched Cable (Abc) (3×120 + 1×95 + 1×16 Sq.Mm) , Fabrication Of Guarding Angle Other Requisites Material For Guarding By Drawing 02Nos G.I Wire And Making Loop At Suitable Distance As Per Respo Drawing/Norms By Providing Holding Clamps, 02Nos. Eye Bolts Made Of M.S. Round Size 12Mm Dia-100Mm Long & Cross Arm Clamps Made Of M.S. Flat Of Size 50X6mm And Bolts As Per Norms Of Respo Norms, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. As Per Direction Of Site Incharge. (Only Guarding Angle & Gi Wire Will Be Provided By Department). , G.I. Wire 4Mm/ 8 Swg , G.I. Wire 5Mm/ 6 Swg , Grouting & Fixing Of Stay Set (16X1800)Mm Including All Work Of Excavation, Cement Concrete In Size (0.60X0.60X0.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing/Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Stay Set (16X1800) , Stay Set Gi (20X1800) , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Fixing Of Insulation Piercing Connector (Ipc) Complete In All Respects, Including Proper Installation, Tightening And Ensuring Safe And Reliable Connection, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of All Types Of Clamps Including F-Type Clamps, Holding Clamps, Cross-Arm Clamps, Lt Clamps, Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Dead & Clamp , Suspension Clamp , F-Bracket With Clamp , Cross Arm Holding Clamp , Providing And Fixing Of Nut & Bolts As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing And Fixing Of Lt Fuse Set Complete On 25/63/100 Kva Transformer In All Respects, Including Proper Mounting, Connection, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Eye Hook Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Stone Pad 300X300x75 Of Approved Quality And Specified Size At Pole/Support Locations, Including Excavation Of Suitable Size Pit, Preparation Of Base, Dressing, Leveling, And Proper Placement In Line And Level As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge, Including Refilling, Ramming And Consolidation To Ensure Stability; The Scope Of Work Includes Cost Of All Labour, Loading/Unloading, Carriage, Alignment And All Incidental Works Required For Complete Execution, And All Tools & Plants (T&P), Equipment And Tackles Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of Danger Board Of Approved Design, Size And Material With Proper Statutory Warning Sign And Lettering, Complete With Suitable M.S. Clamp, Nuts, Bolts And Washers, To Be Rigidly Mounted On Pole/Structure At Required Height Ensuring Proper Alignment And Visibility, As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Drilling Of Holes, Fitting, Tightening, Handling, Loading/Unloading, Carriage To Site, And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of Barbed Wire Of Approved Quality And Specification In Position, Stretched And Secured On Poles/Structures With Suitable Binding Wire, Staples, Clamps Or Other Approved Means, Maintaining Proper Tension, Alignment And Height As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage To Site, Cutting, Jointing, Tightening And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of Stay Insulator Of Approved Make, Type And Rating In Stay Set Assembly, Including Proper Placement Between Stay Wire Lengths, Making Necessary Connections, Tightening And Ensuring Correct Alignment And Insulation As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage To Site, Cutting, Jointing And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of I-Bolt Of Approved Size And Quality For Guarding Angle, Complete With Nuts, Bolts, Washers And Necessary Accessories, Including Drilling Of Holes In Angle/Pole As Required, Proper Insertion, Fitting, Tightening And Ensuring Correct Alignment And Rigidity As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage To Site And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of Number Plate Of Approved Size, Design And Material With Proper Painting/Printing Of Identification Number And Lettering, To Be Securely Mounted On Pole/Structure At Suitable Height Ensuring Proper Alignment And Visibility, As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Drilling Of Holes, Fixing With Suitable Clamps, Nuts, Bolts Or Binding Wire As Required, Handling, Loading/Unloading, Carriage To Site And All Incidental Works Necessary For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of 11 Kv Draw Out Fuse Set Of Approved Make And Rating, Complete With All Standard Accessories, Mounted On Pole/Structure With Suitable Clamps, Nuts, Bolts And Connectors, Including Proper Alignment, Tightening And Making Necessary Electrical Connections For Safe And Reliable Operation As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage To Site, Erection, Testing And Commissioning And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment, Tackles And Testing Instruments Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing And Fixing Of 11 Kv Smc Danger Board Of Approved Design, Size And Material With Proper Statutory Warning Sign And Lettering, Complete With Suitable Clamps, Nuts, Bolts And Washers, To Be Rigidly Mounted On Pole/Structure At Required Height Ensuring Proper Alignment And Visibility As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Drilling Of Holes, Fitting, Tightening, Handling, Loading/Unloading, Carriage To Site And All Incidental Works Required For Complete Installation, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing Paint And Carrying Out Painting Of Pole With Approved Quality Paint System, Including Thorough Surface Preparation By Cleaning, Scraping, Wire Brushing And Removal Of Rust, Dirt And Loose Materials, Applying Primer Coat Where Required And Finishing With Two Or More Coats Of Approved Paint Of Specified Shade, Including Marking/Numbering If Directed, Complete In All Respects As Per Respo Drawings/Standard Specifications And Direction Of Engineer-In-Charge; The Work Includes Handling, Loading/Unloading, Carriage Of Materials To Site And All Incidental Works Necessary For Satisfactory Completion, And The Cost Includes All Labour, Consumables And Minor Accessories, While All Tools & Plants (T&P), Equipment And Tackles Required For Execution Shall Be Arranged And Provided By The Contractor At His Own Construction , Construction Of Meter Room Of Internal Size 8× 8× 10 Height, Including Setting Out, Excavation Of Foundation In All Types Of Soil, Dressing And Disposal Of Surplus Earth Within Specified Lead; Providing And Laying Plain Cement Concrete Of Required Grade For Foundation Base, Followed By Construction Of Brick Masonry In Cement Mortar Of Approved Class For Foundation And Superstructure Walls Of Required Thickness, Including All Leads And Lifts; Providing Reinforced Cement Concrete Lintel And Roof Slab (Solid Slab) Of Required Thickness Using M-20 Grade Concrete With Centering, Shuttering, Vibration And Curing Complete, Including Reinforcement Steel As Per Design; Providing Internal And External Plastering In Cement Mortar Of Required Thickness, Smooth Finishing, And Curing; Providing Flooring With Cement Concrete Or Ips Finish, Including Base Preparation And Finishing; Supplying And Fixing Of Ms/Steel Door With Frame, Including Holdfasts, Hinges, Locking Arrangement And Painting; Providing Ventilators With Ms Grill, Including Fixing; Complete Internal And External Painting/Whitewashing With Approved Quality Paint; Providing Necessary Provisions For Meter Installation Such As Cable Entry Points, Sleeves, Earthing Arrangement, Foundation Bolts And Fixtures; The Scope Includes Cost Of All Materials Such As Bricks, Cement, Sand, Aggregates, Steel, Doors, Grills, Paint, Water, Etc., And All Labour, Tools & Plants (T&P), Scaffolding, Curing, Carriage, Loading/Unloading, Handling And All Incidental Works Required For Complete Construction As Per Standard Specifications And Direction Of Engineer-In-Charge. , Laying Of Power/Control Cable Of Specified Size In Trench/Duct/On Surface Along Approved Route, Including Excavation Of Trench, Sand Cushioning, Proper Dressing, Alignment, Clamping, Identification Tagging, Protective Covering With Bricks/Tiles (Where Required), Backfilling, Ramming, Leveling, And Disposal Of Surplus Earth; Including Handling, Shifting, Straightening, And Pulling Of Cable With Due Care To Avoid Damage And Maintain Required Bending Radius; Complete In All Respects As Per Standard Specifications And Direction Of Engineer-In-Charge, All Materials, Tools & Plants (T&P), Equipment And Tackles Shall Be Arranged And Provided By The Contractor At His Own Construction , Providing Services For Cutting/Trimming Of Trees And Branches Interfering With Lt/Ht Electrical Lines, Including Clearance Of Vegetation For Safe Operation And Maintenance Of Lines, Complete In All Respects As Per Departmental Standards And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Machinery, Safety Arrangements, Cutting, Stacking And Disposal Of Cut Material, Protection Of Existing Utilities, Obtaining Necessary Permissions From Concerned Authorities, And All Allied Works Required For Proper Completion Of The Work As Per Directions Of The Engineer-In-Charge. , Safe Dismantling Of Existing/Old Electrical Materials At Site, Including Careful Removal Without Damage To Reusable Items, And Carriage Of Dismantled Materials From Site Of Work To Electricity Store Centre, Hapur, With Loading And Unloading At Both Ends Over Kachha And Pakka Roads, Strictly As Per Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Transportation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
8.
Educational and Research Institute #11152279 Technical Bid
Tender For Supply Of Drug, Consumable, Reagent & Other Items At Abvgmc&H, Vidisha , List Of Supply Items Drug, Consumable, Reagent & Other Items , 3 Dimentional Polypropylene Mesh With Micro Porosity X Stich Macro Porosicity And Multi Directional Elasticity With Optimesed Atello-Collagen 1 Absorbable Anti Adhesive Barrier-12Cm Right Side , 3 Dimentional Polypropylene Mesh With Micro Porosity X Stich Macro Porosicity And Multi Directional Elasticity With Optimesed Atello-Collagen 1 Absorbable Anti Adhesive Barrier-15Cm Left Side , 5 Ecg Lead , 5 Mm Screw Shaped Poly Glycolic Lactic Acid Absorbable Tracker For Laproscopic Mesh Fixation Device With Min 30 Tracks , Abdominal Drain Set 16 No. , Abdominal Drain Set 20 No. , Absorbable Vicryl Suture 5-0 (Reverse Cutting) , Absorbable Vicryl Suture 6-0 (Reverse Cutting) , Absorbable Vicryl Suture 8-0 (Reverse Cutting) , Acid Etchant Tube , Adult Autoclavable Silicon Patient Breathing Circuit , Adult Bougie (Size-5Mm/15Fr) , Airotar Diamond Point -Straight Fissure Sf-11/13 , Airotar Diamond Point - Round Br-31/41 , Airotar Diamond Point -Tapered Fissure Tf -13 , Airotor Diamond Point - Inverted Cone , Alginate Impression (Materials Should Be Powder(Dust Free) , Normal Setting In Sealed Air Tight Packets Preferably 400Gm Pack) , Anesthesia Machine Make : Comen Model : Ax400 Anesthesia Mask Size 0 , Anesthesia Machine Make : Comen Model : Ax400 Anesthesia Mask Size 1 , Anesthesia Machine Make : Comen Model : Ax400 Anesthesia Mask Size 2 , Anesthesia Machine Make : Comen Model : Ax400 Anesthesia Mask Size 3 , Anesthesia Machine Make : Comen Model : Ax400 Anesthesia Mask Size 4 , Anesthesia Machine Make : Comen Model : Ax400 Anesthesia Mask Size 5 , Anesthesia Machine Make : Comen Model : Ax400 Jr Circuit , Anesthesia Machine Make : Comen Model : Ax400 Megil Circuit , Anesthesia Workstation Machine: Make: Ge Medical System, Model: 9100Cnxt Oxygen Sensor , Anesthesia Workstation Machine: Make: Ge Medical System, Model: 9100Cnxt Battery , Anesthesia Workstation Make : Mindry Model : Wat0 Ex - 30 Battery , Anesthesia Workstation Make : Mindry Model : Wat0 Ex - 30 Disposable Pateint Breathing Circuit Adult Type , Anesthesia Workstation Make : Mindry Model : Wat0 Ex - 30 Disposable Pateint Breathing Circuit Neonatal Type , Anesthesia Workstation Make : Mindry Model : Wat0 Ex - 30 Disposable Pateint Breathing Circuit Paediatric Type , Anesthesia Workstation Make : Mindry Model : Wat0 Ex - 30 Oxygen Sensor , Antimicrobial Incise Drape (Loban) Size-60*45Cm Adhesive Size 50*45 Cm Size-90*60Cm Adhesive Size 60*60 Cm Size-90*90Cm Adhesive Size 90*60 Cm , Appendix Loop Vicryl/Chromic , In Appendecectomy , Applicator Sticks (Disposable, Plastic With Brush Or Sponge Or Cotton). , Arch Wire Sleeve - Grey/ Tooth Color 0.27 & 0.31, Spool Of 10 Feet Ce Approved, For Orthodontic , Atk Balloon 035 Geoalign™ Marker Bands Are Designed To Increase Procedure Efficiency By Minimizing Fluoroscopy Exposure With Sheath Profile 5F Compatible Up To 8 X 80 Mm* Diameters: 3 - 12 Mm, & Lengths: 20 - 300 Mm , Australian A.J. Wilcock Wire -Pulse Straightened ,0.018 & 0.020 25 Ft. Spool Length, High Resilience, Springback And Good Formability , Ayres Spatula Endocervical Brush , B.B Silk With 1/2 Circle Rc Needle 30Mm Length 75 Cm Size 1-0 (12 Foils/Pkt) , B.B Silk With 1/2 Circle Rb Needle 20Mm Length 76 Cm Size 3-0 (12 Foils/Pkt) , B.B Silk With 1/2 Circle Rb Needle 20Mm Length 76 Cmsize 4-0 (12 Foils/Pkt) , B.B Silk With 1/2 Circle Rb Needle 30Mm Length 75 Cm Size 2-0 (12 Foils/Pkt) , B.B Silk With 1/2 Circle Rb Needle 30Mm Length 90 Cm Size 1-0 (12 Foils/Pkt) , B.B Silk With 3/8 Circle Rc Needle 45Mm Length 76 Cm Size 2-0 (12 Foils/Pkt) , B.B Silk With 3/8 Circle Rc Needle 60Mm Length 76 Cm Size 1 (12 Foils/Pkt) , B.B. Silk 4-0 Reverse Cutting , B.B. Silk 5-0 Reverse Cutting , B.B. Silk 5-0 Round Body , B.B. Silk 6-0 Reverse Cutting , B.B. Silk 6-0 Round Body , Bacteria Filter , Bacteria Filter , Band Material - (Molar, Premolar & Anterior) High Quality Soft Stainless Steel Material. , Bandage Cutting Scissors , Barb- Polydioxanone (Pds) Violet, Size 1, 1/2 Circle Rb 65 Mm 70 Cm (12 Foils/Pkt) , Barb- Polydioxanone (Pds) Violet, Size 2-0, 1/2 Circle Rb 65 Mm 45 Cm (12 Foils/Pkt) , Barb Suture-Polydioxanone Violet, 30Cm, 1/2 Circle Round Body 37 Mm Needle, 1-0, Barb Angle 38 To 40 Degree , Barb Suture-Polydioxanone Violet, 40Cm, 1/2 Circle Round Body 36 Mm Needle, 2-0, Barb Angle 38 To 40 Degree , Barbed Broaches (Barbed Broaches Size:21 Mm Barbed Broaches Size:25 Mm) , Bcg(1 Ml Each),Syringe With Needle , Beggs Bondable Brackets With Flat Base & Curved Base High Quality Mesh Of Undersurface For Good Mechanical Retention (Pack Of 10) , Biliary Stent Self Expandable Multiple Deployment Methods For Controlled And Accurate Deployment 1. Trigger Method- A. Single-Handed Deployment Option B. 2 Pump Priming C. Most Controlled Stent Deployment Option 2. Slide Method - A. Rapid Deployment B. Will Slide Deploy Stents Up To 120 Mm In Length C. Mimics Conventional Pin & Pull Technique 3. Combination Deployment- A. Trigger Until Stent Achieves Wall Apposition Then Switch To Slide Conventional Method 4. Remove Performaxx™ Grip Then Use Conventional Pin & Pull Technique 6F Sheath Compatible. Sizes: Diameter (8Mm To 10Mm) & Lengths (2Cm, 4Cm, 6Cm, 8Cm, 10Cm, 12Cm) With Shaft Length Of 80Cm , Bio- Membrane (Bio-Resorbable, Type-1 Collagen Membrane, 30X40Mm) , Biopsy Container , Bipolar Clearmont Ferand (Hand Instrument) With 02 Cable Wire , Blue Bite Composite (Bite Raised) , Bonding Agent Primer , Bone Marrow Biopsy Needle (Jamshidi) 11G,13G , Bone Marrow Stainless Steel Aspiration Needle Reusable(Salahs) 16G,18G , Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) And Silicone Layer (Bilayer) Dermal Regeneration Template 2X2 Inch , Btk Balloon 014 Dual Layer Hydrophilic Coating & Checker Flex Points For Unmatched Trackability With Innovative Reinforced Inner Lumen For Better Pushability Diameter :1.5 Mm To 5.0 Mm & Length: 20- 300 Mm. , Calcium Hydroxide Powder (Bottle Of 10 Grams) , Cardiatocography (Ctg) Machine Paper Wl 15000 Battery , Cardiatocography (Ctg) Machine Paper Wl 15000 Ctg Paper Roll , Cardiatocography (Ctg) Machine Paper Wl 15000 Event Marker , Cardiatocography (Ctg) Machine Paper Wl 15000 Fhr Probe , Cardiatocography (Ctg) Machine Paper Wl 15000 Toco Probe , Catgut Chromic (1/2 Circle Rb 30Mm,76Cm) Size 2-0 (12 Foils/ Pkt) , Catgut Chromic (1/2 Circle Rb 40Mm,70Cm) Size 1-0 (12 Foils/ Pkt) , Cautery Pencil Bipolar , Cautery Pencil Long Tip , Chin Cup With Headgear Chin-Cup Shluld Be Soft And Provide Good Fit. -Headgear And Elastic Traction Should Be Fully Adjustable. , Chromic (3/8 Circle Rc 19Mm 70Cm) Size 3-0 (12 Foils/ Pkt) , Chromic (1/2 Circle Rb 20Mm 70Cm) Size 3-0 (12 Foils/ Pkt) , Cleaning & Lubricating Oil For Hand Piece (500Ml Bottle) , Cling Drape (Size 15*500Cm) , Coconut Oil 1 Litre , Cold Cure Acrylic Resin- Clear Powder+ Liquid,Cold Cure Resin , Cold Cure Acrylic Resin With Liquid Pink Powder+ Liquid,Cold Cure Resin , Cold Mould Seal (Pink Colored In Jars Liquid Form.) , Composite Finishing + Polishing Kit Designed For Finishing Interproximal And Subgingival Composite Fillings , Composite Mesh 15*15 , Composite Mesh 15*15 Cm , Composite Mesh 30*30 , Composite Mesh 30*30Cm , Cr (Carestream) System Film(Size 10X12),Consumable , Cr (Carestream) System Film(Size 14X17),Consumable , Cr (Carestream) System Film(Size 8X10),Consumable , Crimpable Hooks (Medium/ Long) .019 X .025 Medium & Long Length Ss Material, Pack Of 10 , Cryostat Gel (120Ml) , Culture Tube , Curved Posterior Bracket Placing Tweezer For Posterior Teeth. Especially Suited For Placing Brackets And Buccal Tubes In The Posterior Area , Cuticell (Paraffin Tulle) , Cuticell-C 10X10 (Paraffin Gauze Dressing)+Chlorhexidine , Dappen Dish (Small And Medium Size , Made Of Glass.) , Dcr Stents Size Small Medium Large Angle And Straight , Dental Floss (Waxed, Nylon ,Non Braided) , Dental Stone For Prosthodontics Purpose. (Α-Hemihydrates ,Green In Colour.In Airtight Pouches.Setting Time(8-12 Min.)/ Normal Setting) , Dialyzer F8 , Diapers For Adult (L & Xl) , Disafe Filter , Disinfectant For Burs And Rotary Instruments. , Disposable Bedsheet , Disposable Bone Marrow Biopsy Needle,11G,13G (Plastic) , Disposable Catheter Mount , Disposable Drape , Disposable Etco2 Line , Disposable L-Connector , Disposable Needle 26 G , Disposable Needle 26 G X 1/2 Inch , Disposable Needle 27 Gx 1/2 Inch , Disposable Pateint Breathing Circuit Adult Type , Disposable Pateint Breathing Circuit Neonatal Type , Disposable Pateint Breathing Circuit Paediatric Type , Disposable Poly Plain Sheet , Disposable Suction Tubes(Plastic) (Suction Tip Should Be Of Soft Medical Good Plastic With Wire Inside So That Can Be Bent At Closed Angle) , Disposable T-Piece Nebulization Kit Adult , Disposable T-Piece Set Adult , Disposable Urometer Adult , Drug Coated Balloon With 2 Μg/Mm2 Dose Of Paclitaxel With Polysorbate & Sorbitol As Carrier Which Will Deliver An Optimal, Therapeutic Drug Dose To The Target Vessel Wall After A Minimum 30 Second Inflation Time 035 With 120Cm Shaft: Diameter 4Mm -6Mm , Length Upto 150Mm / 035 With 75Cm Shaft Diameter 5-12Mm Length 60Mm /014 With Shaft 150Cm Diameter 1.5Mm -3Mm Length Upto 120Mm , Dual Heated Disposable Patient Breathing Circuit Neonatal Type With Humidification Jar , Dual Heated Disposable Patient Breathing Circuit Neonatal Type With Humidification Jar , Dynaplast (Adhesive) Tape 1 Meter , Dynaplast Elastic Adhesive Bandage 8Cm X 4Cm , Dynaplast Size 4 Inch , Ecg Adult Size Bulb , Ecg Bulb Electrode (Chest Electrode) , Ecg Cable (10 Lead Cable) , Ecg Electrode , Ecg Machine Make : Bpl Model No. Cardiart 8108 110Mm*140Mm*145 Sheet Ecg Paper Pkt , Ecg Machine Make : Bpl Model No. Cardiart 8108 Battery , Ecg Machine Make : Bpl Model No. Cardiart 8108 10 Lead Ecg Cable , Ecg Machine Make : Bpl Pvt Ltd Model : Cardiart 9108 Battery , Ecg Machine Make : Bpl Pvt Ltd Model : Cardiart 9108 Ecg Paper A4 Size , Ecg Machine Make : Bpl Pvt Ltd Model : Cardiart 9108 10 Lead Ecg Cable , Ecg Machine Make : Bpl Pvt Ltd Model : Cardiart 9108 Chest Electrode Adult Type (Bulb Electrode Reusable) , Ecg Machine Make : Bpl Pvt Ltd Model : Cardiart 9108 Chest Electrode Paediatric Type (Bulb Electrode Reusable) , Ecg Machine Make : Contec Model No : Ecg 1200G 10 Lead Ecg Cable , Ecg Machine Make : Contec Model No : Ecg 1200G 210Mm*20 Mts I.D.: 16Mm Pkt Of 5 Roll , Ecg Machine Make : Contec Model No : Ecg 1200G Battery , Ecg Machine Make : Edan Instrument Model No : Se601B 10 Lead Ecg Cable , Ecg Machine Make : Edan Instrument Model No : Se601B 110Mm*140Mm*145 Sheet Ecg Paper Pkt , Ecg Machine Make : Edan Instrument Model No : Se601B Battery , Edta (Gel Root Canal Conditioner 3Ml) , Elastic Tooth Separators Superior Elasticity (Pack Of 1000) , Elastomeric Chain - Short, Long 15 Feet Length Of Spool Grey , Elastomeric O Modules - Clear& Colored Both Clear ,Grey And Colored O- Rings Ligature Ties , Elastomeric Pumps With Sacled Body Air-Vent Blue End Cap With 0.2Μm Hydrophobic Membrane Forces Air Bubbles Out, While Preventing Medication From Flowing Out And Avaliable Flow Rates Of 1/2/3/4/5/6/7 Ml/Hr And 2/4/6/8/10/12/14 Ml/Hr Fluid Path Materials Must Be Free Of Dehp And Latex , Elastomull Bandage 6 Inch , Elisa Printer Roll , Endo Blocks (Convenient Plastic Device For Setting Working Lengths Of Root Canal Instruments) , Endo Loop Chromic 50 Cm Loop , Endotracheal Tube Introducer (Stylet) , Endotracheal Tube No 7 Cuffed , Endotracheal Tube No 7.5 Cuffed , Esmarch Bandage Size 4 Inches (Autoclavable) , Esmarch Bandage Size 6 Inches (Autoclavable) , Ethibond Excel 4 No , Ethibond Excel 5 No , Ethilon (Monofilament Polyamide No. 2.0 Cutting(12 Foils/Pkt) , Ethilon (Monofilament Polyamide No. 3.0 Cutting(12 Foils/Pkt) , Eugenol Liquid. Liquid Containing Eugenol To Be Used In Combination With Zno Powder For Temporary Restorations And Root Canal Sealer , Exhalation Valve , Ventilator, Acutronic Medical System, Fabian Hfo , Extraoral Elastics Sizes - Variable Sizes Ce Approved, For Orthodontic Use (Pack Of 100) , Face Mask(Petit Type) Should Provide Reverse Orthopaedic Pull Between Maxilla And Mandible. Should Include Adjusting Screw.-Forehead & Chin Pads Should Be Soft , Feeding Tube 4No. , Feeding Tube 9No. , Ferric Alum 20 Kg Slab , Fibre Splint (For Periodontal Splinting) , Fibrin Glue 2Ml , Fine + Adsion Tooth And Non Tooth Forcep , Fitc Conjucated Antibody Against C1Q 1Ml , Fitc Conjucated Antibody Against C3C 1Ml , Fitc Conjucated Antibody Against Kappa 1Ml , Fitc Conjucated Antibody Against Lamda 1Ml , Flowable Composite For Bonding Of Orthodontic Retainer , Foam Eartip 10Mm , Foam Eartip 13Mm , Foley Catheter (2-Way) 24 No. , Foley Catheter (3-Way) 20 No. , Foley Catheter (3-Way) 22 No. , Foley Catheter (3-Way) 24 No. , Formocresol Solution , Gabriel Syringe, Haemorrhoids Surgery 10Cc , Gabriel Syringe, Haemorrhoids Surgery 14Cc , Gic Luting Cement Type I , Gigli Saw Wire , Glass Lonomer Cement Restorative Type Ii , Glass Slabs (1 Cm. Thick Glass Slab For Mixing Cement.) , Gp Point F1 , Gp Point F2 , Gp Point F3 , Guedel Airway Size 2 , Gutta Percha Points -(All Sizes) In Separate Boxes. Gutta Percha Points No.15 -80 2% Taper , Haemorrhoid Circular Stapler 33 Mm Row Three (Miph) , Hand Protaper File 21 Mm And 25 Mm (Assorted) , Harmonic Scalpal , Harmonic Scalpel (Open) 23Cm , Hemoclip Applicator Set For Open Surgery Medium Size, To Ligate Blood Vessles , Hemostatic Surgical Dressing For Extraction Socket Containing Iodoform & Eugenol , H-Files 15-40(21Mm,25Mm ) 45-80(21Mm,25Mm) , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 Adult Integrated Heated Breathing Circuit , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 High Flow Breathing Tube, Heated,Neonatal,6 Pin 10/Bx , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 High Flow Breathing Tube, Heated,Pediatric,6 Pin 20/Bx , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 High Flow Cannula,Nasal Adult,Large,20/Bx , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 High Flow Cannula,Nasal Adult,Medium,20/Bx , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 High Flow Cannula,Nasal Adult,Small,20/Bx , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 High Flow Cannula,Neonatal,Extra Large,50/Bx , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 High Flow Cannula,Neonatal,Large,50/Bx , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 High Flow Cannula,Neonatal,Medium,50/Bx , Highflow Nasal Cannula Make:Vincent Medical Manufacturing Co.Ltd.,Model :Inspired 02 Flow,Vun-001 High Flow Cannula,Neonatal,Small,50/Bx , Hip-U Drape Sheet For Thr(Size 240*225Cm) Cloth Disposable With Gsm Quality 50 Gsm Plain Drape 240*200Cm Leggings And Adhesive Strips , Hiv Safety Kit Large , Hme Filter , Hme Filter , Humidifire Make : Neotech Healthcare Excellance Adult/Peadiatric Disposable Auto Feed Humidification Chamber , Humidifire Make : Neotech Healthcare Excellance Model No - Nice8010 Heater Wire Adapter , Humidifire Make : Neotech Healthcare Excellance Model No - Nice8010 Temperature Probe , Humidifire Make : Neotech Healthcare Excellance Model No - Nice8020 Reuseable Peadiatric/Neonatal Humdification Chamber , Humidifire Make : Neotech Healthcare Excellance Model No - Nice8030 Reuseable Adult Humdification Chamber , Humidifire Make : Neotech Healthcare Excellance Infant/Neonatal Disposable Auto Feed Humidification Chamber , Icd With Trocar And Icd Bag (Under Water Drainage Bag) 16 No. , Icd With Trocar And Icd Bag (Under Water Drainage Bag) 20 No. , Icd With Trocar And Icd Bag (Under Water Drainage Bag) 24 No. , Icd With Trocar And Icd Bag (Under Water Drainage Bag) 28 No. , Icd With Trocar And Icd Bag (Under Water Drainage Bag) 32 No. , I-Gel 5 No , Impression Disinfectant Spray It Should Be Bactericidal, Tuberculocidal, Fungicidal And Virucidal, Active Against Hiv And Hep-B , Intraoral Latex Elastics - Variable Sizes Good Quality (With Maximum Extension Up To Three Times Its Original Length) Ce Approved (Pack Of 1000) , Intravitreal Anti Vegf Ranibizumb Injection 10Mg/Ml , Iodoform Powder10 Gms. Pack , K. Files No.10 (21Mm & 25 Mm) 21Mm & 25 Mm Length , K. Files No.8 (21Mm & 25 Mm) 21Mm & 25 Mm Length , K-90 Catheter (Urinary Catheter) , K-Files15-40 (21Mm,25Mm,) 45-80(21Mm,25Mm ) , Knee Arthroscopy Set (Sterile Disposable) Knee Arthroscopy Draprs Camera Cover , Knee-O-Drape Tkr 240*340Cm Elastic Aperture 05Cm Stockinette Adhesive Strips And Leggings , L Connecter, Eto Line , Laproscopic Bipolar Forcep , Laproscopic Fan Retractor , Laproscopic Harmonic Scalpel 36Cm , Laproscopic Knot Pusher , Laproscopic Port Reducer 10 Mm , Laproscopic Port Reducer 10Mm, In Laproscopic Surgery , Laproscopic Port Reducer 5 Mm , Laproscopic Port Reducer 5 Mm , Laproscopic Port Reducer 5Mm, In Laproscopic Surgery , Laproscopic Reusable Stainless Steel Clip Applicator With Angulated Tip For 300Lt Clip, In Laproscopic Surgery , Laproscopic Reusable Stainless Steel Clip Applicator With Angulated Tip For 400Lt Clip, In Laproscopic Surgery , Laproscopic Stroker Washer 10 Mm , Laproscopic Stroker Washer 5 Mm , Laproscopic Tooth Grasper, In Laproscopic Surgery , Laproscopic Trocar Washer 10 Mm , Laproscopic Trocar Washer 5 Mm , Laproscopic Trocar Washer 5Mm, In Laproscopic Surgery , Large Diameter Balloon Non- Complaint, Multilayer Balloon With Coaxial Shaft And Working Pressure Range Of Upto 12 Atm , Laser Machine , Ligature Wire Spool (0.009& 0.010) 20 Gms Spool ; Ce Approved , For Orthodontic Use , Light Cure Restorative Composite Materials With Different Shades , Limb Bulb Electrode , Lingual Buttons - Bondable Mushroom Head, Highly Polished With Curved And Flat Base Each (Pack Of 10) , Lma No. 1 , Loop Nylon No.1 (Laprotomy) , M.B.T. Prescription Stainless Steel Brackets With -0.022 Slot High Quality Stainless Steel With Good Quality Micro Etched Mesh Of Undersurface Of Compound Contoured Bracket Base, Metal Injection Molded With Permanent Id And With Inbuilt Torque In Base. , Magill Forceps (Adult) , Magill Forceps (Paediatric) , Make : Vadi Model No : Vh-3000 Respiratory Humidifire Chamber Neonatal Type , Make : Vadi Model No : Vh-3000 Respiratory Humidifire Chamber Peadiatric Type , Make : Vadi Model No : Vh-3000 Respiratory Humidifire Heater Wire Adapter , Make : Vadi Model No : Vh-3000 Respiratory Humidifire Temperature Probe , Mathieu Pliers With A Tungsten Carbide Tip • Nonslip Grip • Operator Friendly Smooth Glide Spring For Consistent Opening And Closing. For Placement Of Ligature Wires And Elastomeric Ties , Matrix Bands - Ivory No.1 (Stainless Steel Bands) , Matrix Bands -Ivory No.8 (Stainless Steel Band) , Mbt First Molar Tubes- Bondable (0.22 Slot) Set Of 4, With Hooks, Standard Quality Mesh Of Bracket Base , Mbt Second Molar Tubes- Bondable (0.22 Slot) Set Of 4, With Hooks, Standard Quality Mesh Of Bracket Base , Mccoy Blade 3No & 4 No , Measurement Catridge (Pack Of 750 Test),Consumable , Melecot Catheter Set, Nephrotomy Drainage , Merocel Nasal Pack Size 4 Cm, 8 Cm , Mesh Fixation Device With Minimum Strap Length (25 Strap) 7Mm Length , Methyline Blue Solution 500Ml , Micromotor Bur Cutting 0.5Mm,1Mm,1.5Mm,2Mm,2.5Mm,3Mm,3.5Mm,4Mm,4.5Mm,5Mm,5.5Mm,6Mm,6.5Mm,7Mm , Microscope Drape , Mineral Trioxide Aggregate(Mta) Cement , Mini Screw ( Titanium) Orthodontic Size 1.5X6 Mm , Mini Screw ( Titanium) Orthodontic Size 1.5X8 Mm , Miph Stepler Gun , Mircobrider Blade 0 Straight , Mircobrider Blade 40 Curved , Mircobrider Blade 60 Curved , Modelling Lever , Modelling Wax (Colour Wax Sheet In Packing Of 10-12 Sheets For Prosthetic Work) , Mossy Zinc , Multiple Cutter -Circular Type Plate Cutter , Nasal Septal Osteotome With Guard , Nasicell Ref 80-20 A Cm (8Cm X 1.5 Cm X 2 Cm) , Needle 26 1/2 G , Niti Closed Coil Springs With Eyelets Superelastic, 0.012 Diameter - 9 Mm And 12 Mm (Pack Of 10) , Niti Open Coil Springs Superelastic,15Length, Medium , Niti Preformed Archwires (Rectangular) - 0.017X0.025 .019X0.025,0.016X0.022 0.018X 0.025 Upper & Lower Archwires, Superelastic, Trueform Arch Shape (Pack Of 10) , Niti Preformed Archwires (Round) - 0.014 0.016 0.018 &0.020 Upper & Lower Archwires, Superelastic, Trueform Arch Shape (Pack Of 10) , Non Absorbable Nylon Suture Reverse Cutting With Needle (8-0) , Non Compliant, Multilayer Peripheral Balloon With Ultra High Pressure Of 40 Atm. With Choice Of 2 Shaft Lengths Of 75 And 120 Cm Diameter (5Mm To 12Mm) & Lengths (2, 4&6Cm). , Nouvag Cleaner , Nouvag Oil , Orthodontic Photo Metallic Reflector - Biplane: Occlusal And Lateral Highly Reflectiveantifogdouble Sided Biplane Mirrors , Ideal For Palatal And Lateral Intra Oral Photography. , Orthodontic Bonding Composite Tube , Orthodontic Buccal Self Screw Ss 2X10 Mm , Orthodontic Izc Screw Ss 2X12 Mm , Orthodontic Primer Bottle , Orthodontic Retainer Wire , Orthodontic Titanium 2X8 Mm Palatal Implant , Paediatric Airway Size 0 , Paediatric Airway Size 00 , Paediatric Airway Size 000 , Paediatric Autoclavable Silicon Patient Breathing Circuit , Painting & Drapping Sheets (Sterile) Per Kit , Paper Points (• Highly Absorbent Hand Rolled Paperpoints• Sterile Packaged, Strong And Easy Toplace • 200Points/Box Color Coded) , Paste Of Ca(Oh)2+Iodoform Twin Paste Calcium Hydroxide And Iodoform Based Dental Root Canal Filling Material , Pathfinder Files, (10) (Should Be Available In 21Mm,25Mm) • 2 % Taper , Patient Identification Band , Patient Monitor: Make:Ge Medical Systems, Model: B125 5 Lead Ecg Cable , Patient Monitor: Make:Ge Medical Systems, Model: B125 Adult,Paediatric And Infant Nibp Cuffs( Dura Cuff) , Patient Monitor: Make:Ge Medical Systems, Model: B125 Battery , Patient Monitor: Make:Ge Medical Systems, Model: B125 Bis (Bisspectral Index) , Patient Monitor: Make:Ge Medical Systems, Model: B125 Ibp Reusable Cable , Patient Monitor: Make:Ge Medical Systems, Model: B125 Large Adult Cuff ( Dura Cuff) , Patient Monitor: Make:Ge Medical Systems, Model: B125 Nibp Hose Pipe , Patient Monitor: Make:Ge Medical Systems, Model: B125 Rectal/Esophageal Temperature Probe , Patient Monitor: Make:Ge Medical Systems, Model: B125 Sample Lines For Etco2 , Patient Monitor: Make:Ge Medical Systems, Model: B125 Skin Temperature Probe , Patient Monitor: Make:Ge Medical Systems, Model: B125 Spo2 Finger Sensor With Extention Cable( Adult Type) , Patient Monitor: Make:Ge Medical Systems, Model: B125 Spo2 Finger Sensor With Extention Cable( Infant Type) , Patient Monitor: Make:Ge Medical Systems, Model: B125 Spo2 Finger Sensor With Extention Cable( Paediatric Type) , Patient Monitor: Make:Ge Medical Systems, Model: B125 Ecg Trunk Cable , Patient Monitor: Make:Mindray, Model: Ipm 12 5 Lead Ecg Cable , Patient Monitor: Make:Mindray, Model: Ipm 12 Battery , Patient Monitor: Make:Mindray, Model: Ipm 12 Ibp Disposable Pressure Transducer , Patient Monitor: Make:Mindray, Model: Ipm 12 Spo2 Finger Sensor With Extention Cable( Adult Type) , Patient Monitor: Make:Mindray, Model: Ipm 12 Adult,Paediatric And Infant Nibp Cuffs , Patient Monitor: Make:Mindray, Model: Ipm 12 Bis , Patient Monitor: Make:Mindray, Model: Ipm 12 Ibp Reusable Cable , Patient Monitor: Make:Mindray, Model: Ipm 12 Large Adult Cuff , Patient Monitor: Make:Mindray, Model: Ipm 12 Nibp Hose Pipe , Patient Monitor: Make:Mindray, Model: Ipm 12 Rectal/Esophageal Temperature Probe , Patient Monitor: Make:Mindray, Model: Ipm 12 Sample Lines For Etco2 , Patient Monitor: Make:Mindray, Model: Ipm 12 Skin Temperature Probe , Patient Monitor: Make:Mindray, Model: Ipm 12 Spo2 Finger Sensor With Extention Cable( Infant Type) , Patient Monitor: Make:Mindray, Model: Ipm 12 Spo2 Finger Sensor With Extention Cable( Paediatric Type) , Patient Relief Wax Clear, Pack Of 10 , Pediatric Bougie (Size-2.7Mm/8Fr) , Pediatric Bougie (Size-2Mm/6Fr) , Pediatric Eartip For Insert Earphone 3.5Mm Red Colour Infant Ear Tip For Insert Eatphone. , Periodontal Dressing (Non Eugenol Based) Non Eugenol Base Paste And Catalyst Paste Magnesium Oxide Free , Periosteal Elevator 1. Straight (P9) 2. Howarth , Plaster Of Paris Packing Of 3-5 Kg , Plastic Apron , Plastic Wedges (Anatomically Shaped Soft Plastic Wedges To Adapt Matrix Assorted Packing Of Different Sized Wedges) , Plasticin , Pns Needle (Nano Line 22Gx50Mm) , Poliglecaprone (Monocryl), Size 3-0, 1/2 Circle Rb 26 Mm Length 70Cm (12 Foils/Pkt) , Poliglecaprone (Monocryl), Size 3-0, 3/8 Circle Rc 25 Mm Length 70Cm (12 Foils/Pkt) , Polishing Brush For Periodontics Materials , Polishing Cups (Webbed Configuration) - Non Screw Thread Type Design - Should Be Made Of Rubber , Polishing Paste For Periodontics Materials , Poly Propylene, Size 1, 1/2 Circle Rc Needle 45 Mm Length 100 Cm (12 Foils/Pkt) , Poly Propylene, Size 2-0, 1/2 Circle Rb Needle 30 Mm Length 70 Cm (12 Foils/Pkt) , Poly Propylene, Size 3-0, 1/2 Circle Rb Needle 25 Mm Length 90 Cm (12 Foils/Pkt) , Poly Propylene, Size 3-0, 3/8 Circle Rc Needle 22 Mm Length 70 Cm (12 Foils/Pkt) , Poly Propylene, Size 1, 1/2 Circle Rb Needle 40 Mm Length 70 Cm (12 Foils/Pkt) , Polyamide (Nylon) 3-0 Reverse Cutting , Polyamide, Size 2-0, 3/8 Circle Rc Needle 45Mm Length 70 Cm (12 Foils/Pkt) , Polyamide, Size 3-0, 3/8 Circle Rc Needle 26Mm Length70 Cm (12 Foils/Pkt) , Polyamide, Size 4-0, 3/8 Circle Rc Needle 19Mm Length 45 Cm (12 Foils/Pkt) , Polygalactine Size 3-0 3/8 Circle Rc 26Mm 45 Cm (12 Foils/ Pkt) , Polyglactin 1-0 Reverse Cutting , Polyglactin 5-0 Reverse Cutting , Polyglactin 8-0 Reverse Cutting , Polyglactin 1/2 Circle Rb 20Mm 70 Cm Size 3-0 (12 Foils/ Pkt) , Polyglactin 1/2 Circle Rb 20Mm 70 Cm Size 4-0 (12 Foils/ Pkt) , Polyglactin 1/2 Circle Rb 40Mm 90Cm Size 1-0 (12 Foils/ Pkt) , Polyglactin 3.Orc (2472) 22Mm 1/2 Circle , Polyglactin 30 Mm 1/2 Circle Round Body 90 Cm Size 1/0(12 Foils/ Pkt),Consumable , Polyglactin 40 Mm 1/2 Circle Round Body 90 Cm Size 1(12 Foils/ Pkt),Consumable , Polyglactin 910 With Triclosan (Irgacre Mp ) Coating 1-0,1/2 Circle Reverse Cutting O.S,36 Mm,90 Cm,Usfda Approved (12 Foils/Pkt) , Polyglactin 910 With Triclosan (Irgacre Mp ) Coating 2-0,1/2 Circle Round Body,20Mm,90Cm,Usfda Approved (12 Foils/Pkt) , Polyglactin 910 With Triclosan (Irgacre Mp )Coating 1,1/2 Circle Reverse Cutting O.S,40 Mm,90 Cm,Usfda Approved(12 Foils/Pkt)Os-8 , Polyglycolic Acid 1/2 Circle Rb 40Mm 90Cm Size 2-0 (12 Foils/ Pkt) , Polyglycolic Acid 1/2 Circle Rc 40Mm 90Cm Size 2-0 (12 Foils/ Pkt) , Polyplain Sheet 60X90 Inch , Port Closure, Size-0 , 1/2 Circle Rc 22Mm 45 Cm (12 Foils/Pkt) , Port Closure-Ployglactin 910 Violet 45 Cm, 1/2 Circle Reverse Cutting, 23 Mm Needle, 0 No. , Port Closure-Ployglactin 910 Violet 70Cm, 1/2 Circle Reverse Cutting, 23 Mm Needle 1 No. , Port Closure-Ployglactin 910 Violet 70Cm, 1/2 Circle Reverse Cutting, 23 Mm Needle, 1 No. , Port Polyglactin, Size 1, 1/2 Circle Rc 22Mm 70 Cm (12 Foils/Pkt) , Premixed Eugenol Free Temporary Filling Material White Colored, Good Pre-Mixed, Eugenol Free Temporary Filling Material, , Prolene 4-0 Round Body , Prolene 5-0 Round Body , Prolene 6-0 Round Body , Proline No 1-0 Or 2-0Rb (12 Foils/Pkt) , Proline No 3-0Rb (12 Foils/Pkt) , Propylene Mesh 30X30 , Pulp Devitalizer , Radient Warmer Make : Ge Healtcare Pvt. Ltd, Model : Lullaby Reusable Skintemperature Probe , Rapid Palatal Expander (Hyrax Type) - 9, 11 & 13 Standard, Ce Approved, For Orthodontic Use , Reservoir Bag 500 Ml , Reservoir Bag Size 1 Litre , Reservoir Bag Size 1 Litre , Reservoir Bag Size 2 Litre , Reservoir Bag Size 2 Litre , Reservoir Bag Size 500 Ml , Resin Based Root Canal Sealer , Respiretory Humidifire Make : Fisher & Paykel Model No : Mr850 Heater Wire Adapter , Respiretory Humidifire Make : Fisher & Paykel Model No : Mr850 Reuseable Humidifire Chamber Size Adult , Respiretory Humidifire Make : Fisher & Paykel Model No : Mr850 Reuseable Humidifire Chamber Size Peadiatric , Respiretory Humidifire Make : Fisher & Paykel Model No : Mr850 Temperature Probe , Retrieval Snare System: · Dual Sheath 9Fr And 11Fr, Ideal For Denali Retrieval. Kink Resistant Nitinol Construction With Radiopaque Loop For Enhanced Visibility · 90° Loop Snare For Proper Loop Placement With Precise 1:1 Torque Facilitates Easy Filter Hook Capture · Marker Bands For Accurate Positioning Convenient All-In-One Kit Includes New Coaxial Sheaths And Hemostatic Valve , Reusable Silicon Pateint Breathing Circuit Adult For Ventilator , Reusable Silicon Pateint Breathing Circuit Neonatal , Reusable Silicon Pateint Breathing Circuit Neonatal For Ventilator , Reusable Silicon Pateint Breathing Circuit Peadiatric , Reusable Silicon Pateint Breathing Circuit Peadiatric For Ventilator , Reverse Curve Of Spee Niti Preformed Wires - 0.018 0.017 X 0.025 Upper & Lower Archwires, Superelastic, Trueform Arch Shape (Pack Of 10) , Ro Sponge (10X10Cm) , Romo Vac Drain Suction 8 No. , Root Canal Filling Removal Consisting Of Tetra Chloro Ethylene Tetra Chloro Ethylene Based Root Canal Filling Remover , Round Stainless Steel Wires-Different Gauges (19, 20, 21, 22, And 23). Standard Spool. , Ryles Tube 16No. , Ryles Tube 18No. , Scale , Self Expandable Electro Polished Self-Expanding Nitinol Stent With Four Tantalum Spoons Of Both Sides Of Stent. All Sizes 6F Sheath Compatible. Multiple Deployment Methods For Controlled And Accurate Deployment 1. Trigger Method- A. Single-Handed Deployment Option B. 2 Pump Priming C. Most Controlled Stent Deployment Option 2. Slide Method - A. Rapid Deployment B. Will Slide Deploy Stents Up To 120 Mm In Length C. Mimics Conventional Pin & Pull Technique 3. Combination Deployment- A. Trigger Until Stent Achieves Wall Apposition Then Switch To Slide Conventional Method 4. Remove Performaxx™ Grip Then Use Conventional Pin & Pull Technique Sizes: Diameter (5Mm To 14Mm) & Lengths (2Cm, 4Cm, 6Cm, 8Cm, 10Cm, 12Cm) With Shaft Length Of 80Cm & 135Cms , Self Expanding Nitinol Stent Encapsulated Between Two Ultrathin Layers Of Eptfe Grafts (Both Luminal And External Surface Covered By Graft). Flared Ends To Ensure Proper Wall Apposition. Carbon Coated Luminal Surface To Reduce Early Stage Platelet Adhesion. Stent Graft Mounted On Multifunctional Tip-Less Braided Catheters With Stent Loc Mechanism. Diameter : 5Mm To 13.5 Mm Lengths: 20Mm, 30Mm, 40Mm, 60Mm, 80 Mm,100Mm, 120M , Self Expending Usfda Approved For Sfa And Popliteal Nitinol Stent With Unique Triple Helix Design Structure For Multi-Dimensional Flexibility With Unique Delivery System Having Both Thumb Wheel And Pin & Pull Mechanism. Diameter 5Mm -7Mm Length: 40Mm, 60Mm, 80Mm, 100Mm, 120Mm, 150Mm &170Mm With Shaft Length 80 Cm And 135 Cm , Silastic Sheet 1 Mm Thick 5Cm X 5 Cm Sheet , Silicon Ball Orbital Implant 16Mm , Silicon Ball Orbital Implant 18Mm , Silicon Catheter 16No. , Silicon Catheter 18No. , Silicon Lacrimal Set , Silicone Tube Rod , Single Lumen Traditional Varicose Vein Stripper,Treating Varicose Vein , Skin Grafting Blade , Small Jumbo Cutter , Sodium Hypochlorite (3%) Concentration 3% For Endodontic Irrigation , Spc Trochar No. 16 ,Supra Pubic Catheterization , Stainless Steel Preformed Archwires (Rectangular) 0.017 X 0.025 0.018X 0.025 & 0.019 X 0.025 Upper & Lower Archwires, Clean Shiny Finish With Good Formability, Trueform Arch Shape (Pack Of 10) , Stainless Steel Preformed Archwires (Round) - 0.020 Upper & Lower Archwires, Clean Shiny Finish With Good Formability, Trueform Arch Shape (Pack Of 10) , Staple Suture Remover , Sterile Disposable C Arm Polycover (2 Pieces Per Pack) , Sterile Disposable Drape For Patient Drapping Size 160Cm*120Cm , Sterile Disposable Drape For Patient Drapping Size 200*120Cm , Sterile Disposable Drape For Patient Drapping Size160*200Cm , Sterile Surgical Skin Marker Pen With Scale , Sterile Universal Precaution Operative Kit(Hiv Safe Ot Kit)(Disposable Surgen Gowne With Water Profe Interlineing, Hood Cap, Face Mask, Shoe Cover, Arm Guard, Disposable Gloves, Disposable Protacative Eye Wear, Patient Drape Sheet, Disposable Bag, Trolly Cover, Suture Bag, Cut Sheet, Slit Sheet, Draw Sheet, Mayos Stand Cover (More Than 50 Gsm) , Stone Removing Forcep For Laproscopic Surgery 10Mm , Straight Scissor , Suction Catheter 12 No. , Suction Catheter 14 No. , Suction Catheter 16 No. , Suction Disinfection 2% -It Should Be Bactericidal, Fungicidal And Effective Against Hbv, Hiv Hcv , Suction Drain (Closed-Wound Drainage System) 10 No. , Suction Drain (Closed-Wound Drainage System) 12 No. , Suction Drain (Closed-Wound Drainage System) 14 No. , Suction Drain (Closed-Wound Drainage System) 18 No. , Suction Drain (Closed-Wound Drainage System) 8 No. , Suction Tube (In Metre) , Support Catheter Support Catheter Expands Treatment Pobilities By Combining Optimal Pushability With Its Superior Tip Entry Profile & Unique Lesion Length Measurement Capabilities. 0.014-135Cm/150Cm | 0.018-90Cm/135Cm/150Cm| 0.035-65Cm,90Cm,135Cm,150Cm , Surgical Blade 12 No. , Surgical Gloves With Dermashield Extra Coating With Art Pin Hole Barrier Tech Gamma Irradiated Tested In Use Of Chemotherpay Drugs As Per Astm,Thickness 0.33Mm, Latex Powder Free, Size 6 , Surgical Gloves With Dermashield Extra Coating With Art Pin Hole Barrier Tech Gamma Irradiated Tested In Use Of Chemotherpay Drugs As Per Astm,Thickness 0.33Mm, Latex Powder Free, Size 6.5 , Surgical Gloves With Dermashield Extra Coating With Art Pin Hole Barrier Tech Gamma Irradiated Tested In Use Of Chemotherpay Drugs As Per Astm,Thickness 0.33Mm, Latex Powder Free, Size 7 , Surgical Gloves With Dermashield Extra Coating With Art Pin Hole Barrier Tech Gamma Irradiated Tested In Use Of Chemotherpay Drugs As Per Astm,Thickness 0.33Mm, Latex Powder Free, Size 7.5 , Surgical Gloves With Dermashield Extra Coating With Art Pin Hole Barrier Tech Gamma Irradiated Tested In Use Of Chemotherpay Drugs As Per Astm,Thickness 0.33Mm, Latex Powder Free, Size 8 , Surgical Gloves With Dermashield Extra Coating With Art Pin Hole Barrier Tech Gamma Irradiated Tested In Use Of Chemotherpay Drugs As Per Astm,Thickness 0.33Mm, Latex Powder Free, Size 8.5 , Surgical Gloves With Dermashield Extra Coating With Art Pin Hole Barrier Tech Gamma Irradiated Tested In Use Of Chemotherpay Drugs As Per Astm,Thickness 0.33Mm, Latex Powder Free, Size 9 , Surgical Mop(X-Ray Detectable Abdominal Gauze Pad) 12X12 , Surgical Tungsten Carbide Burs For Micromotor Straight Hand Piece Round Burs - 10, 8 Shank Length - 44.5Mm , Surgical Tungsten Carbide Burs For Micromotor Straight Hand Piece Straight Fissure701,702,703 , Surgicel ( 2 Inchx 3 Inch) Ref 1953 , Suture Cuitting Scissor , Suture Mersilk 6-0 (Reverse Cutting) , Suture Mersilk 6-0 (Reverse Cutting) , Suture Prolene 6-0 (Reverse Cutting) , Suture Vicryl 3-0 22Mm 1/2C Convensional Cutting , Swab Stick With Tube-Sterile(70-80 Mm Length 10- 15 Mm Diameter), Unit 1(100/Pkt , Packet),Consumable , Thermal Paper , Thoracic Trocar Catheter 20 Fg,30Fg , Thyrodotomy (Crico) Set , Torch Nanoplex Igg/Igm (Nano Elisa Kit) (05 Tests / Slide) , Tourniquet With Belt , T-Piece Recovery Kit 15Mm Collector , Trachea Tee/ T Piece Universal Size , Tracheostomy Tube Size 3 4 5 6 Mm I.D. Portex , Trackers , Trimethoprim (5Μg) 50 Disk Per Vial , Trucut Biopsy Needle For Biopsy , Tryphine Blue Dye 0.4% 100 Ml (Each Pack) , Turp Set , Turp Set For Connecting Normal Saline Bottle , Tynor Hard Cervical Collar Medium , Uro Meter , Vaccume Suck Suction Set , Ventilater Make :- Acutronic Medical System, Model : Fabianhfo Diaphragm , Ventilater Make :- Acutronic Medical System, Model : Fabianhfo Exhalation Valve , Ventilater Make :- Acutronic Medical System, Model : Fabianhfo Reusable Neonatal Flow Sensor With Cable , Ventilater Make :- Vyaira Medical, Model Bellavista 1000 Anuual Maintance Kit- A)Sinter Bronze Filter B)Inlet Filter Blower C)Inlet Filter Cooling , Ventilater Make :- Vyaira Medical, Model Bellavista 1000 Diaphragm , Ventilater Make :- Vyaira Medical, Model Bellavista 1000 Exhalation Valve , Ventilater Make :- Vyaira Medical, Model Bellavista 1000 Oxygen Sensor , Ventilater Make :- Vyaira Medical, Model Bellavista 1000 Proximal Flow Sensor , Ventilator Make : Mindray Model : Sv-600 Anuual Maintance Kit , Vicryl (Polyglactin) 8-0 Round Body , Wash/Waste(4 Catridge),Consumable , Water Trap For Etco2 , Wire Tucker- Ligature Tucking Instrumentdouble Ended For Adjusting And Tucking Steel Ligatures. , Wooden Wedges (Assorted Packing Of Different Sized Wedges Box Of Approx 100 Wedges) , Zinc Oxide Powder. Zinc Oxide Powder For Mixing With Eugenol In Dental Use Arsenic Free Bottle Of 110 Gms , Zinc-Phosphate Cement Powder + Liquid (Harward Type) Pack Of Powder (Zinc Oxide + Magnesium Oxide) + Liquid ( Phosphoricacid) , Acetic Anhydrite 100Ml , Alpha-Naphthol 25Gm /Box , Alpha-Naphthyl Phosphate 100Gm , Anti Human Globulin (Coombs Reagent) , Anti-Coagulant Cetrate Dextrose Solution , Arabinose Sugar 100Gm/Box , Barrium Chlorise Powder 100Gm/Box , Benzidine 100Gm , Bromothymol Blue Indicator Sol,125Ml , Cefeiricol 30 Ug 50 Disc/Vial , Ceftaroline 30 Ug 50 Disc/Vial , Ceftazidime Avibactum 30+40 Ug 50 Disc/Vial , Charged Slides Nos , Chikungunya Igg Antibody Elisa Kit 96 Wells X 1 Kit , Chloroform , Citrate Buffer 100Ml , Colistin E Strip , Complete Blood Grouping For Gel Card , Copper Acetate 500 Gm , Copper Sulphate 500 Gm , Crystal Violet Powder 100Gm/Box , Cytokeratin 5/6 3 Ml , Disposable Blood Component Apherisis Set 500Ml , Estrogen Receptor (Er) 3 Ml , Eusol Solution (Chlorinated Lime And Boric Acid Solution) , Factor-V Disc 50 Disc/Vial , Factor-X Disc 50 Disc/Vial , Fast Blue B Salt 100Gm , Ferric Chloride 100Gm/Box , Fresenius Kabi (M64907 Counter 100) Sterile Connecting Device (Compodock) , Glass Slide Caring Tray , Glass Slide Rack , Glass Slide Stand , Hemocue Hb 201+Analyzer Cubette Each Box Contain 100 Cubette , Hiv Elisa Test Kit, Pack Size 96 Wells Per Kit(1 Kit Containing 96 Wells25Gm /100 Gm , Iodine Resublimate 100Gm , Ki 67 3 Ml , Leptospirosis Igm Elisa Kit 96 Reaction Per Kit , Lysine Amino Acid 25Gm /Box , Lysostaphin Disc 100Gm/Box , Mannitol Sugar 100Gm/Box , Mannose Sugar 100Gm/Box , Mercuric Sulphate 1 Litre , Methyl Violet Powder 1 Litre/Bottle , Methyl Violet Solution 500 Gm , Mrsa Agar Base 30-50 Reaction Per Kit , Muller-Hilton Agar 500Gm/Box , Ninhydrin 1 Litre , Nitric Acid 500 Gm , Nuclear Fast Red 200Gm , Ornithine Amino Acid 100Gm/Box , Oxidase Disc 50 Disc/Vial , Pap Pen Nos , P-Dimethyl Amino Cinnamaldehyde Extrapure, 5Gm , Phenolphthalein Sol,125Ml , Phenyl Pyruvic Acid Agar 25Gm /Box , Phosphoric Acid 100Ml , Phosphotungstic Acid 100Ml , Picric Acid 500Gm , Picro Indigo Carmine 150Gm , Poly L Lysine 50Ml , Polymixin B E Strip , Potassium Iodide 100 Gm , Potassium Oxalate 500Ml , Potassium Thiocynate 500Gm , Potato Dextrose Agar 100Gm/Box , Progesterone Receptor (Pr) 3 Ml , Pyruvate Sugar 100Gm/Box , Rcm Media 500Gm/Box , Resorcinol 500 Gm , Saturate Of Glucose Powder 500Gm , Scrub Typhus Igm Elisa Kit 100Gm/Box , Silver Nitrate 500Gm , Sodium Ammonium Molybdate 500Gm , Sodium Carbonate 500 Gm , Sodium Chloride Lr,500G , Sodium Hydroxide 500 Gm , Sodium Hypobromide 1 Litre , Sodium Nitrite 100Gm , Sodium Sulphate 100 Gm , Sodium Tungstate 100Ml , Sodium Tungstate Hydrated Ep,100G , Sorbitol Sugar 100Gm/Box , Staining Steel Stand , Starch (Soluble) Ep,500G , Starch Iodide Papers,5Bkt , Sulfanilic Acid (0.8%) 100Gm/Box , Sulfanilic Acid 500Gm , Sulfide Indole Motility Medium 50 Disc/Via , Sulphuric Acid 100 Ml , Surgical Tray , Teicoplainin E Strip , Test Tube Holder , Test Tube Stand Big Size , Trichloroacetic Acid 25 Gm , Tris Buffer 500Ml , Tuberculin Insulin Syringes (100Syr/Box) , Urease Enzyme 100Gm , Vancomycin E Strip , Water Endotoxin Detection Elisa Kit 96 Reaction Per Kit , Xylose Sugar 100Ml/Box , Brimonidine Eye Drop, 0.1%(5Ml),Eye Drop , Buprenorphine 20Mcg/Hr 2 Patch In 1 Pkt , Buprenorphine 10Mcg/Hr 2 Patch In 1 Pkt , Buprenorphine 5Mcg/Hr 2 Patch In 1 Pkt , Dorzolamide Eye Drop, Ip 2% W/V Eye Drop , Injection Biphasic Isophane Insulin Ip 100Iu/Ml , Injection Biphasic Isophane Insulin Ip 40Iu/Ml , Injection Cisatracurium Besylate 20Mg 10 Ml Vial , Injection Clonidine 150 Mcg / Ml (1 Ml Each Amp) , Injection Clotrimazole 1%W/V +Lignocaine 2%W/V Ear Drop 10Ml Vial Bfs/Ffs Squeeze(10Ml Vial) , Injection Epidosine 8Mg/Ml , Injection Flumazenil 0.5Mg/Ml 5Ml Annual Periodical Maintenance , Injection Intracameral Moxifloxacin Pfs (0.5 Ml/1Ml) , Injection Intravitreal Bevacizumab 100Mg /4Ml , Injection Levobupivacaine 0.5% In Dextrose Inj (Heavy) 0.5% 4Ml Annual Periodical Maintenance , Injection Levobupivacaine Hcl 0.25% 20Ml Vial , Injection Levobupivacaine Hcl 0.5% 20Ml Vial , Injection Levobupivacaine Solution 0.5% 4 Ml Vial , Injection Lignocaine Hydrochloride 4% (5 Ml Vial) , Injection Nalbuphine Hcl 10Mg/Ml 1Ml Annual Periodical Maintenance , Injection Nalbuphine Inj 10Mg/Ml , Injection Phenylephrine 50Mcg 10 Ml Vial , Injection Propofol In Mct/Lct Fat Emulsion 1% W/V 20Ml Vial , Injection Propofol In Mct/Lct Fat Emulsion 1% W/V 50Ml Vial , Injection Ropivacaine Hydrochloride In Dextrose Inj (Heavy) 0.75Ml 4Ml Annual Periodical Maintenance , Injection Sodium Chondroitin Sulphate+Sodium Hyaluronate Solution Pfs 0.5Ml , Injection Sodium Chondroitin Sulphate+Sodium Hyaluronate Solution Pfs 0.75Ml , Injection Sugammadex Inection 100Mg 2Ml Vial , Lidocaine 5% 2 Patch In Pkt , Liquid Paraffin 50Ml Bottle , Magnesium Sulphate I.P. 50% W/V, 10Ml Annual Periodical Maintenance Injection , Meropenem 250Mg/Vial,Injection , Natamycin Eye Drop, 5% W/V 5Ml Eye Drop , Ns Bottle 3 Litre , Sodium Chloride 3% Iv 100 Ml , Sterile Haemocoagulase Topical Solution 0.2 Cu , Tablet Canagliflozin 100 Mg 10X10 , Xylocaine 10% Spray 50 Ml
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Madhya Pradesh View Result →
9.
Coal and Mines #11125033 AOC
Bids Are Invited For Facility Management Services - Lumpsum Based - Industrial; Shift Wise Operation Of Water Treatment Plant; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost)
Contract Date: Ref. Documents Contract Value : ₹ 20.80 Lakh
Boards / Undertakings / PSU No of Bidders 5
Madhya Pradesh View Result →
10.
Housing Urban and Rular Development #11047139 Technical Bid
Tender For 1. Supply, Installation, Testing And Commissioning Of Walk In Cold Room Made Of 100 Mm Puf Panels With Ppgi For Internal And External Surface For Cold Room Along With Other Accessories Having 01 No. Of The 34 To 40(W) X 72 To 80(H) Flush Door 100Mm Ppgi Finish Both Sides. The Job Includes Civil Works As Per Necessity And Other Allied Works At Site. The Puf Panels Shall Be Of Make Sintex /Lloyd/Jindal. Material To Be Stored : Blood Samples Ambient Temperature: =450C Room Temperature : 20C Pull Down Time : =20 Hrs Room Size (External) : 10×8×10 Cold Room Structure: 1) Room Size (External) : 10×8×10 2) Door Size: 34 To 40(W) X 72 To 80(H) 3) Door Type: 100Mm Ppgi Both Side Flush Type Door, Plastic Curtains On The Door Way, Flush Type Door With Kick Plate At Bottom And Fitted With Door Closer, Examination Window (View Port), Seal Closer Mechanism. Heavy Duty Lock - Lockable With 100% Fail-Safe Provision For Opening From Inside. 4) Wall Panels: 100 Mm Thick Puf Wall Panels With Density Of 40±2 Kg/M3 For Cold Room With Cam Lock For Puf Panels Inter Locking. 5) Panel Finish: Ppgi For Both Sides Of Panel (Corrosion And Moisture Resistant) 6) Flooring: Aluminum Checker Plate 10 Guage Or 3Mm Thick With Over Insulated Base Refrigeration System: Supply, Installation, Testing And Commissioning Of 01 No. Refrigeration Units (One Main And One Standby Cold Room Machine) Of Minimum Of 24000 Btu/Hr Capacity Each Along With Evaporator Make: Bluestar, Voltas, Carrier. Job Also Includes Supply And Installation Of Other Accessories Such As Expansion Valve, Control Panels, U Flashings, Inner Flashings And Flat Flashings And Sealant Etc. As Per Site Requirement. Supply And Installation Of Ms Frame In Position And Applying A Priming Coat Of Approved Steel Primer For Odu Unit And For Isolator Mcb With Box With Electrical Wire With Copper Piping, Drain Work And Other Civil Work As Per Site. 1) Temperature Range: +1°C To +6°C 2) Refrigerant: Eco-Friendly As Per Norms/Design 3) System: Air-Cooled 4) Compressor: Reciprocating/Rotary 5) Cooling Capacity: Min. 24000Btu/Hr @-4 Evap. Temp. And Condensing Temp Of 540C 6) Number Of Cdu: 01 No. 7) Evaporator: Min. 24000Btu/Hr 8) No. Of Evaporator: 01 No With 03 Nos Of Fans: 9) Supply: Three Phase 10) Electric Load: 2.8Kw/Hr (Approx.) 11) Automatic Voltage Stabilizer: 7.5 Kva 3 Phase Along With Supply Installation Testing And Commissioning Of Required Assorted Size Cables As Per Site Requirements For Commissioning And Running Of Whole Installed System. Electrification: Proper Electrification Of Cold Storage Room By Way Of Providing And Installation Of Power Points, Lighting, Fans Along With Electric Cables Of Assorted Sizes As Per Site Requirement. Complete Job Includes Tapping Of Power Supply From The Main Panel With Cost Of Material, Labour Charges And All Kind Of Taxes Thereof. Complete Job With Cost Of Material, Labour Charges And All Kind Of Taxes Thereof. , Supply And Fixing Of 04 Nos. Ss-304 Adjustable Rack Of Size 4-0X 8-0X1-0 With Sheet Thickness 1.0/0.8 Mm In Position Along With Required Allied Works For Medicine Storage Size As Per Medical Standards. , Chemical Earthing Of Db By Way Of Excavation Of 01 No. Pit Of Proper Size Upto A Depth Of 03M For Providing And Laying Of 03 Meter Copper Electrode 01 Nos. In Hard And Soft Soil Followed By Filling Of Required Quantity Of Earthing Chemical. Job Includes Filling Of Pit With Excavated Soil And Fitment Of Copper Electrode With Copper Strip From Electrode To Machine. Complete Job With Cost Of Material, Labour Charges And All Kind Of Taxes Thereof. , Electrical Work- Providing And Fitting Of 02 Nos. Tpn, Distribution Board, Aluminum (Armoured) 25Sqmmx4 Core - 30 Mtrs, 6 Sq.Mm Copper Cable- 60 Mtrs. , Miscellaneous Work- Job Includes Minor Civil Works And Repairs To The Wall Plaster Wherever Necessary, Alarm System For Trapped Person, Loading, All Type Of Miscellaneous Framework, Unloading, Freight, Lock System, Etc , Supply Installation Testing And Commissioning Of 2.0 Tr Split Air Conditioners (Hot And Cold) With All Accessories (Along With Outdoor Stand) And Ambient Upper Temperature Range Of = 52 Degree Celsius For Cooling With Maximum Cooling Capacity = 6500 W And For Heating Ambient Lower Temperature Range = 0 Degree Celsius With Maximum Heating Capacity = 6000 W Having Air Flow Rate =590 Cfm With Minimum 3 Star And Of Reputed Make I.E., O-General, Mitsubishi, Daikin, Hitachi, Bluestar Along With Allied Accessories I.E. Minimum Of 10 Of Refrigerant Pipes And Communication Cable. Complete Job As Per Site Requirement And Instructions Of Engineer-In-Charge And Also Includes Cost Of Materials, Labour Charges, Transportation Charges And All Other Charges. , Supply, Installation, Testing And Commissioning Of 5Kva Copper Wound Automatic Wall Mounted Voltage Stabilizer Input Voltage Range Of 90-300V & Of Superior Quality Isi Mark For Acs. Make: Microtek/Aulten/Servokon/Electricfield , Providing And Fitting Of Spn Of 40 Annual Periodical Maintenance Of Reputed Make I.E. Havells, L&T With Cover (Complete With Fittings) For 2.0 Tr Capacity Acs To Be Installed. , Providing And Fitting Of Extra Copper Pipe With Insulation. , Providing And Laying (Using Conduits And Wire Fasteners / Cable Clips) ) Of 10 Sq Mm 4 Core Multistrand Flexible Isi Marked, Frls Pvc Insulated Copper Conductor Cable And Of Standard Make I.E. Havells, Polycab, Finolex, Anchor Only For The Purpose Of Connecting Stabilizers To The Electrical Panel. Complete Job As Per Instructions Of Engineer-In-Charge And Site Requirements And Also Includes Cost Of Materials (Including Clamps, Bends/Elbows, Tee-Bends, Thimbles Etc.), Labour Charges, Transportation Charges And All Other Charges And Taxes. , Providing And Laying Of (Using Conduits And Wire Fasteners / Cable Clips/Conduit Fasteners) 4 Sq Mm Isi Marked, Frls Pvc Insulated Copper Conductor Cable Of Standard Make I.E. Havells, Polycab, Finolex, Anchor Only For The Purpose Of Connecting Air Conditioning Units (Outer & Inner) To The Stabilizer. Complete Job As Per Instructions Of Engineer-In-Charge And Site Requirements And Also Includes Cost Of Materials (Including Clamps, Bends/Elbows, Tee-Bends, Thimbles Etc.), Labour Charges, Transportation Charges And All Other Charges And Taxes. , Providing And Laying Of Pvc Drain Pipes Of Assorted Sizes Viz. ¾, Etc. To Collect And Transport The Drained Water From The Ac Unit To A Designated Location, Considering The Specific Requirements Of The Site. The Pvc Pipes Will Be Installed With Appropriate Size Bends And Clamps To Ensure Proper Alignment And Secure Connections. Job Also Includes Miscellaneous Works Civil Works Like Wall Opening To Pass Ducts & Pipes, Plastering & Refinishing Of The Same To The Original Finish As Per The Site Requirements. Complete Job As Per Instructions Of Engineer-In-Charge And Site Requirements And Includes Cost Of Materials (Including Clamps, Bends/Elbows, Nipples, Tee-Bends, Etc.), Labour Charges, Transportation Charges And All Other Charges And Tax. , Providing, Fitting And Testing Of Air Curtains At The Main Entrance Of Blood Bank At Gmch Jammu The Air Curtain Should Be In A Metal Casing, Strong, Fire Resistant, Simple Installation And Easy Cleaning. They Should Have Double Air Way Deflectors Design Obtaining An Even Air Stream So That It Creates An Invisible Air Barrier Over The Doorway That Prevents The Inner Cool/Warm Air From Going Outside And Also Prevents Insects , Dust Etc From Entering Inside The Ward. All The Air Curtains Have To Be Fixed On The 8 Mm Ply Board Fitted And Hung By Sides . The Specifications Of Air Curtain Should Be: Material Of Cabin-- Cold Rolled Mild Steel 1. Base Plate- 16 Swg 2.Body- 18 Swg 3.Grilles- 20 Swg 4. Blower Housing- 20 Swg 5. Length- 6.00 Of Curtain Interior Finish- Anti Rust Treatment With Primer Paint, Exterior Finish- Ht Paint/Stove Painting (Powder Coating), Fans And Motors- The Multiple Forward Curved Centrifugal Type Aluminum Fan Wheels Statically And Dynamically Balanced Driven By Extended Motor Shaft. The Job Also Includes Providing And Fitting Of 4Mm Sq Wire Of Suitable Length To Be Connected To The Main Power Supplies Of Each Unit, Spns- 1 Nos With Covers, Baton, Pvc Clamps And Gutties Etc As Per Site Requirement Complete Job Includes Cost Of Material, Transportation, Labour Charges And All Types Of Taxes. , Repair And Cleaning Of Ducts Of Air Conditioning At Various Locations Of Blood Bank Of Gmch Jammu By Way Of Removal Of Vent Grilles And Diffusers For Manual Cleaning Using Industrial-Grade Hepa-Filtered Vacuums, Soft-Bristle Brushes, And Compressed Air Tools To Eliminate Dust, Debris, And Other Particulate Buildup From The Visible Portions Of The Duct Openings And Repair To All The Damaged Vents As Per Site Requirement So That The Air Flow Reaches The Last End Duct. All Debris Collected During The Cleaning Will Be Properly Contained And Disposed Of Offsite. After Cleaning, All Vents And Will Be Securely Reinstalled And Airflow Tested To Confirm Proper Operation. A Visual Inspection And Photographic Documentation Of Cleaned Vents Will Be Included In The Final Job Report. The Job Includes Replacement Of Damaged Power Coated Aluminium Extruded Grill. Complete Job Includes Cost Of Material, Consumables,Labour And All Types Of Taxes Etc , Providing And Fitting Of 4K Hdmi Cable 5 Meter , 55 Led Tv 4K For 24X7 Operations With Uhd Dimming And Auto Motion Plus Make: Samsung/Sony/Sansui , Supply & Installation Of 5 Mp Ir Fixed Network Dome/Bullet Camera- Suitable For Outdoor Operation With Following Specifications Along With Accessories Required For Fitting. 30 Meter Ir, 1/2.7 Progressive Scan Cmos Color: 0.0125 Lux @ (F2.0, Agc On) 0 Lux With Ir, Resolution: 2592 × 1944 Or Better ,Wdr Should Be 120Db Or Higher, 3.6Mm,Mic And Speaker Inbuilt , Camera Shall Have Ip67 Ingress Protection And Ce, Fcc, Ul, Rohs,Cmmi-5 , ,Weee Certifications Make: Hi Focus/Matrix/Prama , Supply & Installation Of 16Channel 2 Sata Network Video Recorder-For Encoding And Processing The Video Data At The Camera ,Then Streaming To The Nvr Recorder For Storage And Remote Viewing With Following Specifications And Features. Nvr Shall Support Up To 12 Mp Or Higher,Nvr Shall Support 4K (3840 × 2160) ,Nvr Shall Support 16-Ch Playback,Tcp/Ip, Dhcp, Dns, Ddns, Ntp, Sadp, Smtp, Nfs, Iscsi, Upnp™, Https ,Nvr Shall Support 02 Sata Interface. Nvr Shall Support Up To 16 Tb Capacity For Each Hdd,1 Rj-45 10/100/1000 Mbps, Nvr Shall Support Sh.265,H.265+,H.265,H.264 Video Compression, Onvif Compatible,Shall Have Ce, Fcc, Ul, Bis,Rohs,Cmmi-5 ,Weee Certifications Make: Hi Focus/Matrix/Prama , 4 Tb Av Hdd Make: Seagate/Wd/Toshiba , Providing & Fitting Of Rack 4U With Glass Door And Lock Fully Loaded Conforms To Din 41494 & Iec 297 , Iso 9001:2015 Standards Make: Comrax/ President/Apc , Supply & Installation Of 8 Port Giga Poe Switch, With 8*10/100/1000Mbps Ports1-8 + 2*10/100/1000 Ports 9-10 Poe Ports, Full Duplex ; 1000 Mbps, ,Poe Power Budget: 96W,Standards: Ieee 802.3, Ieee 802.3U, Ieee 802.3Ab Ieee 802.3Xl Ieee, Packet Forwarding Rate: 14.88Mbps, 8K Mac Address Table, Packet Buffer Size 192Kb Make: Hi Focus/Digisol/D-Link/Netgear , Providing & Fitting Of Conduit 25Mm Along With Clamps Etc. , Providing/Supply, Installation, Testing & Commissioning Of Cat-6 Outdoor Cable Cat6 4-Pair U/Utp Outdoor Double-Jacketed Cable With Frequency Range: 1-250 Mhz, 23Awg ( 0.55Mm) Solid Bare Copper Conductor, High-Density Polyethylene(Hpde) Color Coded As Per Ansi/Tia-568 2-D Insulation,Cable Core: 4 Twisted Ppair Held In Place By Hdpe Cross-Web Separator,Water Resistant: Jacket Only,Inner Jacket: Lszh Grey, Outer Diameter:7.0Mm Nominal,Outer Jacket: Uv Resistant Hdpe For Outdoor Use, Black Make: Amp/ Honeywell/Commscope/Comrax , Providing & Laying Of Power Cable With 3 Core ,2.5 Sq.Mm ,Copper Make: Finolex/ Havell/ , 1Kva Online Ups With 60 Minutes Smf Battery Backup With Rack Make: Elnova/Fuji/Apc , Providing And Fitting Of Rj 45 Jacks Which Includes Crimping At Both The Ends Of The Cable , Integration, Testing &Commissioning All The Equipments And System For Proper Functioning
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
11.
Health and Family Welfare #11036404 AOC
NOTICE INVITING RE E-TENDER FOR PROCUREMENT OF SOME CONSUMABLE ITEMS FOR TWO YEARS FROM THE DATE OF AWARD OF CONTRACT (AOC) Group-I Re E-Tender For Procurement Of Some Consumable Items For Two Years From The Date Of Award Of Contract (Aoc) , Cardiac Catheter Introducer Sheath With Needle ( Radial)- 4Fr/5Fr/6Fr, Sheath Length -7.0Cm. Sheath Wire-0.025Cm * 45Cm , Cto Coronary Angioplasty (Ptca)Guide Wire Wires: Subcategories With Different Tip Loads: Hydrophobic/Hydrophilic , Hydrophilic Guide Wire, Nitinol Core With Hydrophilic Coated, Standard Exchange Length-260 Cm, Straight Tip & “J”, Dia-0.18 “ To 0.38” , Transvenous Temporary Pacing Catheter. Size : 5,6 & 7Fr. • Should Be Wovan Dacron Constructed Catheter. • Platinum Tip Electrode Lead. , Plasma Filter For Plasmapheresis , Epidural Kit For Paediatric : Complete Epidural Kit Wit Epidural Catheter 72Cm/90Cm & 24G/22G Made Of Polyamide + Plyurethane Having 3/6 Lateral Eyes, 3 Embedded Line For X Ray Visibility, Tuhey Needles, 0.2 Micron Filter, Lor Syringe And Pin Pad. , Catheter Double Lumen Internal Jugular Curved/Straight 10Fr. , Catheter. Umbilical Catheter { For New Born } All Size,With Female Flexible Mount ,Open Tip Should Be Soft, Rounded,Atraumatic ,Length 40 Cm , Dialyzer High Flux (F60s/Hf80s/Hdf100s) For Hdf Specification : 1. Surface Area-1.3M2 To 1.8M2 2.Blood Priming Volume-80 Ml To 110 Ml. 3. Uf-Co-Efficient-40Ml/Hr/Mmhg To 55Ml/Hr/Mmhg 4. Maximum Tmp-500 Mm/Hg To 600 Mm/Hg 5. Dialyser Membrane-Polysulfone 6. Sterilization Method-Inline Serilization , Dialyzer Single Use For Sero Positive (Low Flux Dialyzer) Specification : 1. Surface Area-1.3M2 To 1.6M2 2.Blood Priming Volume-64 Ml To 90 Ml. 3. Uf-Co-Efficient-12Ml/Hrs/Mm Hg To 16Ml/Hrs/Mmhg 4. Maximum Tmp-500 Mm/Hg To 600 Mm/Hg 5. Dialyser Membrane-Polysulfone 6. Sterilization Method-Inline Steam Sterilization , Ventriculo Peritoneal Shunt (Medium Pressure) In Sterile Pack , Knitted Polyester Fabric Patch, Size – 4” X 4”. *Thickness Should Be - 0.61Mm,*This Metarial Patch Graft, Endarterectomy Procedures And Asd / Vsd Repair. , Mouth Mirror Small Head , Hand Scaler Set Of 5 Piece , Tweezer Dental (Sizes No. 2) , Pediatric Extraction Lower Incisors & Canine Forcep , Plaster Spatula , Root Canal Explorer Stainless Steel (Cow Horn Design) , Spirit Lamp , Upper Canine Extraction Forcep English Pattern , Upper Incisor Extraction Forcep English Pattern , Upper Molar Extraction Forcep English Pattern , Warwick James Elevators , Surgical Elevators- Cryer’S Pattern , Mouth Mirror With Handle , Renal Stent -4,5,6 & 7Mm.• Stent Base Should Be Cobalt Chromium.• Should Be Rapid Exchange Delivery System (0.014” / 0.36Mm)• Should Be Shaft Size 80 & 120 Cm. , Silver Ion Impregnated Or Hydrophilic And Benzalkonium Chloride Impregnated Triple Lumen Central Venous Catheter : Triple Lumen Pur Catheter, Polymerized With Biguanide Materials Having Antimicrobial Efficacy, Nitinol Guidewire, Valve Needle & Safesite Connector For Needle Free Injection. , Microscope, Binocular, Complete With 2 Eye Pieces And 3 Or 4 (Scanner) Objectives Including Oil Immersion Is: 4381 Along With Is:15269, Is: 8725 And Is: 15268 , Disposable Suction Pod Stabilisation System For Cabg, The Pod Should Rotate 3600 , Basic Set – Procedure Pack Contains Essential Items Needed For A Number Of Common Procedures Including Lumber Puncture, Spinal Anaesthesia, Epidural Anaethesia, Liver Biopsy, Paediatric Surgery, Oncology Etc. (Also Offers Custom Made Service) I. Tray Ii. Syringe Luerslip Iii. Aperture Drape Iv. Galipot V. Prep Forceps Vi. 4 Ball Swab (Small) Vii. 2 Ball Swab (Large) Viii. 1 Filter Needles 5 Um Ix. 3 Hypodermic Needles 18G, 21G & 25G X. 1 Outer Wrap 75 X 70 Cm Xi. Absorbent Towel 33 X 38 Cm , Disposable Fluid Warmer Tubing, * Blood And Iv Fluid Warmer Set With Injection Port. , Ear Speculas Specification : A. Troeltschs Ear Specula, Adult Size, Set Of 3. B. Troeltschs Ear Specula, Infant Size, Set Of 3. , Mono Leaflet Mechanical Prosthetic Mitral / Aortic Valve With Elevated Pivot Guards • Mono Leaflet Rotatable Or Tilting Disc Rotatable • Swing Ring Hence-25 Alloy • Disc Made Of Uhmpe • Swing Ring Made Of Polyester , Pin Index Valve For O2 And N2o For Anaesthetic Apparatus , Positive Airway Pressure System : 1. 22Mm Od Patient End To Accommodate Mounthpiece. 2. Scalloped Ambient Air Inlet With Gaps To Resist Occlusion. 3. Pressure Port With White Sealing Cap, To Allow Connection To A Gauge For Easy Monitoring. 4. Gas Inlet Port To Allow Connection To O2 Source With A Flow Meter. 5. Can Be Used In Conjunction With Aerosol Medication (E.G Nebulizer) Via 22Mm Connection. 6. Available With A Disposable Manometer. 7. Transparent Design For Visual Monitoring Of Contaminants. , Ultrasound Therapy Unit (Two Heads) Technical Specification : Frequency Of 1 & 3 Mhz Intensity Of 0-3 W/Cm2 With Display Of Output Parameters Along With Timer And Two Water Proof Treatment Heads, One Large To 5 Cm Second Small Up To 1.0 Cm System Configuration Accessories Spares And Consumables : - All Standard Accessories Desired For Proper Functioning Of The Machine Jelly As Per Requirement. , Cannula, Femoral Venous Cannula : Kink Resistance Thin Wall, Radio Opaque Bodies With Multiple Side Holes. Depth Markings Permit Precise Positioning Of The Cannula With A Tapered Tip Dilator Which Facilitates Insertion Over 0.038 In. ( 0.1 Cm ) Guide Wire. Size : Assorted, 21 In. (53.3 Cm) Overall Length 25.5 In. (64.8 Cm) Overall Length. , Corrugated Rubber Sheath Drain , Disposable Ventilator Heated Wire Circuit With Water Chamber. Should Be Tidel Volume Range From 200 Ml To 1500 Ml. Should Be Minimal Deade Space 55 Ml. Medical Grade Pe. Connector 15/22 Mm M/F For Y Piece, Connector 15/22 Mm M/F For Ett & Mask. Standard Length. 6Ft. Or Expandable Length. , Oximetry Cable For Cco Monitor (Reusable) , Supraglottic Airway Device 2Nd Generation Specification : 1. Cuff-Should Be Made From Soft Gel Like Material ( Medical Grade Thermoplastic Elastomer) That Should Create A Non-Inflatable, Anatomical Seal Of The Pharyngeal, Laryngeal And Perilaryngeal Structures. 2. 15 Mm Connector. 3. Position Guide 4. Gastric Channel / Drainage Port. 5. Bite Block 6. Buccal Cavity Stabilizer 7. Epiglottis Blocker 8. Display Of Size – For Quick, Easy Reference And Weight Guidance. 9. Can Be Used As A Conduit For Intubation. 10. Size 1,1.5,2,2.5,3,4,5. , Platinum Chromium Coronary Stent System , Important Note: 1. All Prospective Bidders Are Requested To Quote The Rate In Boq As Per Accounting Unit (Au) Repeat As Per Accounting Unit (Au) & Item Specifications As Mentioned In The Table-1. Wrong Quoting Of The Rate In Boq Will Be Dealt With As Per Penal Provisions Of The T&C Of The Tender. 2. Quality Of The Product Supplied, May Be Ascertained By Testing / Physical Examination By The Experts At Any Stage Of The Tender Period. 3. The Equipment Should Be Us Fda/ Ce/ Bis/ Cdsco Approved (Us Fda/ Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/ Cdsco Is Not Available). 4. The Prospective Bidders Of The Said Tender Are Requested To Make A Declaration In Affidavit Under Annexure Vi(B)In Case Of Sole Manufacturer/Importer (I.E. Proprietary In Nature). 5. If The Item(S) Under Sole Manufacturer / Importer Is (Are) Proprietary In Nature, Quarterly Intimation Is Solicited From The Approved Bidders Positively Regarding The Status Of Their Item(S) Proprietary In Nature, Otherwise Their Item(S) Will Be Blocked In The Smis. 6. In Case Of Tie Bid, Decision Will Be Taken By The Tia As Per G.O. No. 2320-F(Y), Dated 07.06.2022 Issued From Finance Department Audit Branch (Group T).
Contract Date: May 08, 2026 Contract Value : ₹ 14
Government Departments No of Bidders 25
West Bengal View Result →
12.
Housing Urban and Rular Development #11029052 Technical Bid
Tender For Addition/Alteration And Other Allied Works Of Rsq 15 At Rehari, Jammu. Cno- 11 Np- 1 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Meters Lead. 2 Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. 3 Providing And Laying Full Body Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1Cement :4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete. 4 Providing And Fixing Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations, Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour Or Shade. 5 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 6 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm (Thickness To Be Specified By The Manufacturers) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.(Somany, Kajaria Or Equivalent). 7 Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Meters Lead : : Of Area Of 3 Sqm. And Below. 8 12Mm Cement Plaster Of Mix: 1 : 6 ( 1 Cement : 6 Coarse Sand). 9 6 Mm Cement Plaster To Ceiling Of Mix 1 : 3 (1 Cement : 3 Fine Sand). 10 Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per I.S. 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : Kitchen Sink With Drain Board 510X1040Mm Bowl Depth 250Mm. 11 Providing And Fixing Of Water Proof Flush Door 34Mm Thick With 1.00 Mm Thick Laminate (Green, Century Or Equivalent)/ Veener On Both Sides Including Lipping, Painting/ Polishing, Hinges, Tower Bolts, Door Stopper, Mortize Lock (Harrison, Godrej Or Equivalent)..Inxluding Stainless Steel(Grade Ss:304) T Profile In Grooves As Per Direction Of Eic. 12 Engaging Carpentar 1St Class. 13 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length (Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately): Sal Wood. 14 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.Second Class Deodar Wood 30 Mm. 15 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge : Second Class Deodar Wood. 16 Renewing Glass Panes, With Wooden Fillets Wherever Necessary : Float Glass Panes Of Thickness 5.0 Mm (Weight Not Less Than 12.5 Kg/Sqm) 17 P/F 4Mm Water Proof Ply On Wood Work Of Standard Make. Complete Job. 18 Providing And Fixing Decorative High Pressure Laminated Sheet Of Plain/Wood Grain In Gloss/Matt/Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is: 2046 Type S Including Cost Of Adhesive Of Approved Quality. 1Mm Thick. 19 Providing And Fixing Base Cabinets For Modular Kitchen Comprising Of Box Made With 18 Mm Bwp 710 Grade With Type A Bond (Phenol-Formaldehyde Resin) And Surface Of Plywood Having Both Side Laminates With Front Side Edge Bending Tape, Backing Made Of 6 Mm Acp Sheet Of Alstrong Make, Ss 90° Hinges With 0° Crank Like Kaff, Hafele Or Equivalent, Shutters With High Gloss Laminates With Four Side Edge Bending Tape, Superior Quality G/J Profile Handles, Accessories Include Matrixbox / Tandem Drawer Box, Pvc Cuttlery Tray, Dish Rack Complete. 100 Mm Adjustable Pvc Legs And 100 Mm Pvc Skirting With Brackets And Skirting Corner Including Cabinet Connector For Cabinet Fixing. Cabinet Depth 600 Mm.Includes L Shape Cr Unit. Complete Job As Per Directions Of Engineer In Charge. (Payment For Front Face Area Only). 20 P/F Almirah (2 Deep) With Backing Made Of 4 Mm Plain Solid Color Acp Sheet, Frame Work And Shutters With 19 Mm Superior ( Century, Green Etc.) Plywood. Including Finishing With Textured Matt Finished Laminate Of Min 1.00 Mm Thickness On Exterior And Plain White Laminate On Interior Surface, Matching Edge Bending Tape On Exposed Sections Of Plywood Any Any Design And Formation As Per Directions Of Engg. I/C. Work Includes Tower Bolts, Magnetic Catcher Incl Hanging Rods Sliding/ Hinged Mechanism With Protuded/ Flushed Premium Brass Handles 6\ And German Telescopic Channels For Drawers. Complete Job. 21 P/L/F 4Mm App Waterproofing Treatment (Primer And App Sheet) With Hot Torch Treatment And 2 Coats Pf Aluminum Paint Included. Complete Job. 22 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 1 Mm Thick. 23 Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Liter Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour. Two Coats. 24 Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. Two Coats. 25 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Internal Work Concealed Fixing The Pipe With Clamps At 1.00 Meter Spacing Including Cutting Chases And Making Good The Wall Etc. 15 Mm. 26 P/F 32 Mm Cp Brass (Jaquar Make) Basin Mounted Swivel Type Sink Mixer. Complete Job. 27 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank 28 P/F Concealed Body, Single Lever High Flow Divertor (Jaquar) Including Making All Connections And Making Good The Walls. 29 P/F Wall Mounted Hot And Cold Basin Mixer With Single Lever(Jaquar). 30 P/F 3 Way Concealed Divertor Shower System Set With Single Lever Mixer Bath Spout With Attached Telephonic Shower Resting On Wall Mounted Stand And Over Head Shower(Square 1X1)(Jaquar). 31 Providing And Fixing Floor Mounted, White Vitreous China Single Piece, Double Traps Syphonic Water Closet Of Approved Brand/Make, Shape, Size And Pattern Including Integrated White Vitreous China Cistern Of Capacity 10 Litres With Dual Flushing System, Including All Fittings And Fixtures With Seat Cover, Cistern Fittings, Nuts, Bolts And Gasket Etc Including Making Connection With The Existing P/S Trap, Complete In All Respect As Per Directions Of Engineer-In-Charge. (Jaquar) 32 P/F 5 Mm Bevelled Edge Looking Glass Fixed To Wall With Spacers And Ss Flat Head Screws. Complete Job. 2X2-0\X3-0\ 12.00 Sft 33 P/F 32Mm Cp Brass Angle Valve With Wall Flange. (Jaquar) 34 P/F Cp Brass Single Lever Health Faucet With Flexible Ss Cased Pipe And Wall Mounting Arrangement. 35 P/F Cp Brass Short Body Mm Nominal Bore Of Jaguar Or Equivalent Make 36 P/F Cp Brass Long Body Mm Nominal Bore Of Jaguar Or Equivalent Make 37 P/F 5Mm Thick Glass Shelf With Guard Rail, 600Mm Length.(Jaquar). 38 P/F Ss 600Mm Long Towel Rack With Sliding Hooks. (Jaquar) 39 P/F Frosted Glass Soap Dish With Wall Mounted Ss Frame Of Superior Make. (Jaquar) 40 P/F Forsted Glass Tumbler With Wall Mounted Ss Frame Of Superioe Make. (Jaquar) 41 P/F Pump Action Frosted Glass Soap Dispensor With Wall Mounted Ss Frame Of Superior Make. (Jaquar) 42 P/F Ss Towel Ring With Wall Flange Of Superior Make, (Jaqar) 43 P/F Ss 304 Gratings For Floor Drainage With Cockroach Trap. (5\X5\) 44 P/F Vanity With Counter Top Basin With Waste Coupling And Waste Pipe,Cp Mixer Of Standard Make(Jaquar Or Equivalent, Basin Mounted) Including Drawers For Storage, Backlit Looking Glass Of Size 2X1.5. Complete Job. 45 Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. (I) Single Socketed Pipes 75 Mm. 46 Engaging Welder With Welding Set And Consumables. 47 Providing And Fixing Chromium Plated Brass Handles With Necessary Screws Etc. Complete : 100 Mm. 48 Providing And Fixing Pvc Moulding Of Different Sizes 12Mm To 65Mm Width (8 Feet Length) Fixed With Adhesive Of Approved Quality And Screws/Nails On Walls As Per Directions Of The Engineer-In-Charge .65Mm. 49 Providing And Fixing Pvc Moulding Of Different Sizes 12Mm To 65Mm Width (8 Feet Length) Fixed With Adhesive Of Approved Quality And Screws/Nails On Walls As Per Directions Of The Engineer-In-Charge.40Mm. 50 Providing And Fixing Nickel Plated M.S. Pipe Curtain Rods With Nickel Plated Brackets 20 Mm Dia ( Heavy Type). 51 Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Necessary Screws Etc. Complete. : 52 Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, Laid On 20 Mm Thick Cement Mortar 1:4 (1Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 53 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Five Level Including Curing But Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size). 54 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 55 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platforms. 56 P/F Pvc Panelling/Wallpapers Of Premium Make On Walls And Ceilings As Per Directions Of Engineer I/C. 57 Providing, Fixing And Applying Plaster Of Paris (Pop) False Ceiling Consisting Of Frame Work Made With 50Mm Sq M.S. Tubes Of 18 G Thickness As Main Runner At 600 Mm C/C Both Ways, Suspended/ Supported With M.S. Flats 25X4 Mm From Existing R.C.C. Slab, Finished Smooth To Line And Level Including Necessary Supports, Scaffolding Etc. As Required And Also Including Applying A Coat Of Red Oxide Zinc Chromate Primer Over The M.S. Frame Work And Suspenders Complete. Including Providing And Fixing Expanded Metal Of Size 5.25 Mm X 1.25 Mm Thickness Welded To Main Runners And Applying Pop (Calcium Sulphate Semi Hydrate Variety) To The Expanded Metal Of Thickness Not Less Than 10 Mm. 58 Brick Work With Common Burnt Clay (Non-Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In : Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand). 59 Extra For Brick Work With Common Burnt Clay Bricks/Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level. Rsq 15 60 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). 61 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Welded. 62 Providing And Fixing Precoated Galvanized Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Jammu And Kashmir View Result →
13.
Drinking Water Supply and Sanitation #10820727 Price Bid
Annual Housekeeping And Annual Maintenance Of Ac Water Cooler , Water Purifier , Fire System , Water Tank , Garden Etc At Sinchai Bhawan Jln Marg Jaipur For The Year 2021-22 , Supply Of Dry Manure Including Loading Unloading , Transportation & Stacking At Site . Vermi Compost , Supply Of Chemical Fertilizers At Store In Bags Weighing Not Less Than 50 Kg Each Including Loading Unloading & Transportation , Urea , Super Phosphate , Supply Of Insecticides & Pesticides At Store In Dust/ Liquid Form Complete Methyl Prathion 2% , Supply Of Different Sized Pots At Site Store Including Loading Unloading & Transportation Etc Complete , Cement Pot 300 Mm Size , Cement Pot 350 Mm Size , Supply Of Pvc Hose Pipe Of Different Sizes At Store Including Transportation Etc . Complete 25 Mm Dia , Supply Of Different Varieties Of Indoor Plants In Poly Bags/Earthen Pot According To Height Growth And Age Of Plant At Site Including Loading Unloading And Transportation Etc . Complete , Deshi Crotons , Crotons Bangalore 1 . 5 To 2 Feet , Drassina 1 To 2 Feet , Garderner Grade I , Beldar/Coolie/Chowkidar/Water Man/Earth- Dresser , A . C . ( Amc ) , All In All Comprehensive Maintenance Of Various Type Airconditioners After Defect Laibility Period Of Equipment Including Repair / Replacement Of Compressor , Condensing/ Cooling Coil , Refrigerant Piping , Fan Motor , Remote , Charging Of Refrigerant When Ever Required And Periodical Servicing As Per Oems Recommendations To Meet Out The Efficient Performance Of The Equipment . 1 . 0/1 , . 5/2 . 0 Tr Window Type Air Conditioner , All In All Comprehensive Maintenance Of Various Type Airconditioners After Defect Laibility Period Of Equipment Including Repair / Replacement Of Compressor , Condensing/ Cooling Coil , Refrigerant Piping , Fan Motor , Remote , Charging Of Refrigerant When Ever Required And Periodical Servicing As Per Oems Recommendations To Meet Out The Efficient Performance Of The Equipment . 1 . 5/1 . 8/2 . 0 Tr Split Type Air Conditioner , Water Cooler , All In All Comprehensive Maintenance Of Water Cooler After Defect Laibility Period Of Equipment Including Compressor , Condensing/ Cooling Coil , Water Tank With Inner Piping Including Repair /Replacement Of Components , Charging Ofrefrigerants When Ever Required , Cleaning Servicing Etc As Per Oems Recommendations To Meet Out The Efficient Performance Of The Equipment . Up To 60/120 Ltr Capacity , Water Purifier , All In All Comprehensive Maintenance Of Reverse Osmosis Water Purification System Including Repair I Replacement Of Components , Consumables , Cleaning , Servicing Etc As Per Oems Guide Lines To Meet Out The Tds Level Of Water As Per Client Requirement / Standard Norms After Defect Laibility Period Of The Equipment . 25 Llr/Hr Capacity , All In All Comprehensive Maintenance Of Domestic Water Purifier Including Replacement Of Components , Consumables , Cleaning , Servicing Etc Complete In All Respet After Defect Laibility Period Of The Equipment . , Water Tank Cleaning Mechanised Cleaning Of Storage Tanks Comprises Of Following 6 Stage As Mentioned Below :1 . Mechanical Dewatering2 . Desalting Removal Of Leftover Dirty Water And Sludge With Sludge Pump3 . Cleaning Of Wall , Ceiling And Floor By High Pressure Water Jet With Help Of Equipments Which Creates A Pressure Of 100-150 Bar4 . Removal Of Remaing Sludge From Floor With The Help Of Industrial Vacuum Cleaner . 5 . Spraying Of Non Toxic , Bio Degradable Ecofriendly And Bacterial Agent Certified By A Govt Approved Laborary To Disinfect The Tank From All Harmfull Pathogens . The Dose Should Be Safe As Per The Uecd Guidelines & 23 Adopted On 17 Th December 2001 . 6 . Treatment Of Inside Tank By Exposing Uv Radiation To Kill Further Suspended Or Floating Bacteria If Any , Upto 500 Ltr . , Above 500 Ltr . To 1000 Ltr . , Above 1000 Ltr . , Cleaning Of Sinchai Bhawan Campus , Skilled Supervisior For Civil Work/Hem , Unskilled Sweeper Per Day , Supply Of Cleaning Materials , Phenyl , Toilet Cleaner , Nap . Balls ( 1 Pkt ) , Odonil ( 1 Pkt ) , Washing Powder ( Nirma ) , Room Spray , Lifeboy Soap , All Out Liquid , Dettol/ Lifeboy Handwash , Hit/ Baygon Mosquito Spray , Dustor ( Poncha ) , Hydrochloric Acid
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
14.
Public Administrative Department #10743594 AOC
Rate Contract For Group No9, Surgical Consumables, Instruments And Suture Material. Tender For The Supplies Of Drugs And Pharmaceuticals, Labchemicals, X Ray Films And Chemicals, Surgicalsutures And Dressings, Vaccines, Sera Etc. And General Items For The Year 2023 25. , Catheter: 100% Silicone Foleys Ballon Catheter 2 Way Size 12,14,16,18 , Catheter: 100% Silicone Foleys Ballon Catheter 2 Way Size 8 , Fixation Device: 5 Mm Laproscopic Non Absorbable Helical Fastener Made Up Of Medical Grade Stainless Steel Covered With Atraumatic Polymer Cap To Avoid Metal Exposer. Should Come With Fastener Level Indicator Of 30 Fasteners , Suture: 6-0 Braided Silk Suture Round Body , Alcohol Hand Gel: 60% W/V Ethanol + Emolients And Alkonium Compound , Abdomenal Surgical Gauze Pad (Sterile): Abdomenal Surgical Gauze Pad (Sterile), 8 Layered, 12X12 With Radio Opaque Marking And Thread Handle, Gamma/Eto Sterilized , Tube: Abdominal Drainage Tube Pvc With Multiple Eyes All Size. , Abdominal Drainage Tube : Abdominal Drainage Tube Pvc With Multiple Eyes Size 24,28,32 , Suture : Aborbable Wound Closer Device Knot Less 1/2 Circle Taper Cut 1-0 , Hemostat : Absorbable Adhesion Barrier In The Form Of Off-White Knitted Fabric Prepared By Oxidized Regenerated Cellulose Indicated For Both Open And Laparoscopic Procedures 3X4 Inches , Hemostat : Absorbable Hemostat Powder Microporous Polysaccharide Hemosphere With Applicator In One Single Sterile Pack Of 1 Gm , Hemostat : Absorbable Hemostat Powder Microporous Polysaccharide Hemosphere With Applicator In One Single Sterile Pack Of 3 Gm , Hemostat : Absorbable Hemostat Powder Microporous Polysaccharide Hemosphere With Applicator In One Single Sterile Pack Of 5 Gm , Fixation Device: Absorbable Non Metallic Tacks For Hernia Fixation Having 5 Mm Tacks (30 Fasteners) - , Suture : Absorbable Unidirectional Knotless Tissue Control Device, Symmetric Anchoring Pattern With 5 Anchors/Cm ,Polydioxanone With Fixation Tab , Size 1, 40Mm ,1/2 Circle Taper Point , 45 Cm , Iol: Acrylic Hydrophobic Foldable Iol , C Loop Haptic , 5.5 Mm Optic Size And ( 12 Mm Lens Size ) Iol , Wound Packing: Activated Charcoal With Silver Is An Antimicrobial, Flexible, Soft, Non-Adherent Rope Which Contains An Activated Charcoal Fabric Impregnated With Silver In A Non-Woven Cover That Does Not Stick To The Wound. The Device Is Ideal For Packing Into Deep Wounds And For Use Like A Wound Cover On Superficial Wounds.20X20cm , Plaster: Adhesive Plaster 7.5 Cm Width Pores Allowing Air To Pass Hypoallergic( 7.5Cm X 5Mtrs Roll) , I.V. Set: Advance Fluid Administrative System With Protective Cap With Prime Stop, Air Stop, Bacterial Retention Air Vent 2 Micron, 15 Micron Fluid Filter In The Chamber, Medical Grade Non Toxic Transparent Pcv Tubing With Kink Free Parking Space In Roller Clamp With Leuer Lock , Wound Dressing: Advanced Human Acellular Dermal Matrix With 97% Of Donor Dna Removed And Sterility Assurance Level Of 10¯6 Allowing For Rapid Cellular Infiltration And Re-Vascularization For The Treatment Of Chronic Wounds As Well As Burn Management And For Soft Tissue Reconstruction. Meshed Form 3 X 3 Cm , Dressing: Ag Collagen Matrix Dressing With Silver Is An Advnaced Wound Care Dressing Made Of Collagen, Sodium Alginate, Carboxymethyl Cellulose (Cmc), Ethylenediaminetetraacetic Acid (Edta) And Silver Chloride. (Assorted Size) , Gel: Alcohol Based Antimicrobial Hand Gel 60% W/V Ethyl-Alcohol , Liquid: Alcohol Based Hand Sanitizer 0.2% Benzalkonium Chloride ,Water & Glycerine , Swab: Alcohol Swab (Disposable) 70% Isopropyl Alcohol , Mesh : Anatomical Polypropylene Mesh Of Lap Inguinal Hernia Repair Having Sealed Edges With Medial Marker . Size Large Left/Right (10.8 X 16 Cm) , Anklets: Anklets Small/Medium/Large , Suture : Antibacterial Absorbable Surgical Suture Polyglactin 910 1/2 Circle Round Body 40Mm Heavy Needle Violet Brided Coated - 90Cm, Size-1. , Suture : Antibacterial Coated Violet Monofilament Polydioxanone Suture With 90 Cm Size 0 With 1/2 Circle Taper Point Ct-1, 36.4Mm Needle Usfda Approved. , Wound Dressing: Antimicrobial Calcium Alginate With Silverwound Dressing Are Soft & Conformable Wound Covers With High Mannuronic Acid. 10X10cm , Gloves: Anti-Microbial Surgical Sterile Glovessize- 6, 6.5, 7, 7.5, 8 , Antiseptic Solution: Antiseptic Solution:Available Iodine 1%W/V In An Aqueous Sodium Iodide - Surfactant Base , Ayers Wooden Spatula: Ayers Wooden Spatula Withendo Cervical Brush , Mattress: Bed Sore Prevention Air Mattress (Ripple Type) Alternating Air Flow With Pressure Pump , Suture: Black Monofilament Nylon Straight Cutting Needle 60 Mm, 70 Cm., 1-0 , Suture: Black Monofilament: Nylon 3/8 Circle Spatula Double Needle 6 Mm, 30Cm. C.S. Ultima , 10-0 , Blood Bag: Blood Bag With Tamper Proof Outlet Port 100 Ml With Cpda As Iso 3826, 350Ml-Sterilized, As Per Drugs And Cosmetic Act & Rules 1945 , Blood Collection Bag Quadruple With Sagm: Blood Collection Bag Quadruple With Sagm 450 Ml Bag , Bt Set: Blood Transfusion Set With Leucocyte Filter , Suture: Blue (Polypropelene) Monofilament: 1/2 Circle R-B 30 Mm, 90 Cm. ,1-0 , Suture: Blue (Polypropelene) Monofilament: 1/2 Circle R-B 40 Mm, 70-80 Cm. ,1(One) , Powder: Boric Acidi.P. , Liquid: Boroglycerine/ Borax Glycerine I.P. , Suture : Braided Quoted Polyester 45 Mm 1/2 Circle Taper Cut Heavy No.-2 , Suture : Braided Quoted Polyester 55 Mm 1/2 Circle Taper Cut Heavy No.-5 , Bt Set: Bt Set , Transparent , Flexible Drip Chamber Having 200 Microne Filter , Cover: C Arm Cover, Standard Size, Sterilized, Disposable , Co2 Gas: Carbon Dioxide Gas For Laproscopy. , Suture: Catgutchromic 1/2 Circle R-B 30 Mm, 70-80 Cm., 1-0 , Suture: Catgutchromic 1/2 Circle R-B 30 Mm, 70-80 Cm., 3-0 , Suture: Catgutchromic 1/2 Circle R-B 40 Mm, 70-80 Cm., 1(One) , Suture: Catgutchromic 1/2 Circle R-B 40 Mm, 70-80 Cm., 1-0 , Suture: Catgutchromic 1/2 Circle Tapercut 40 Mm, 100 Cm., 1-0 , Suture: Catgut Chromic 1/2 Circle R-B 30 Mm, 70-80 Cm., 2-0 , Suture: Catgut Chromic: 1/2 Circle R-B 30 Mm,76 Cm. ,3-0 , Cervical Collar: Cervical Collar Adult (Soft) , Catheter: Chest Drainage Catheter Without Trocar, Distal End Open And Proximal End Fitted With Taperedtongue,(All Size) , Catheter Marked Every 2 From Last Eye With Connector To Drainage Bag , Chest Drainage System : Chest Drainage System (Disposable) With Trocar Containing Chest Tube Pvc Sterilised With Multiple Eyes, All Sizes, Bottle 1200 Ml , Bag: Chest Drainage Water Seal Bag Pvc, Capacity 1000 Ml , Drainage Set : Chest Drainage Water Seal Bag Pvc, Sterlized Capacity 1000 Ml , Bag: Chest Drainage Water Seal Bag Pvc, Sterlized Capacity 1000 Ml-2000 Ml , Mouthwash: Chlorhexidine Gluconate 0.2% W/V Sodium Fluoride Ip 0.05% W/V Zinc Chloride 0.09% W/V , Suture: Chromic Catgut 1/2 Circle 45 Mm Round Body 100 Cm Size 2 (Two) , Stapler Device: Circular Stapler For Haemarroide With Fixed Head 33Mm With Variable Staple Closure Height 0.75-1.5Mm And Knife Diameter Of 24.4Mm Having 28 Staples. Should Have Circular Anal Dilator Purse-Sting Suture Endoscope And Suture Threaded. , Urobag With Urenometer: Clear Transparent Measured Volume Chamber. Measures Volume Of Urine Collectd.Facility For Overflow Into The Sealed Urine Bag Attached To The Urinometer.Close Circuit With The Urine Bag Elemiating Spillage And Contamination.Port For Urine Sampling.Individually Packed ,Sterile Single Use, , Clip: Clips Lt -300 , Clip: Clips Lt -400 , Drainage Set: Close Wound Suction Drainage Set Made Of 100% Silicon. 7Mm Flat Catheter With Corrugation With Perforations. 20 Cm Long: With 200 Ml Collapsible Bottle. , Catheter: Closed Circrit Et Tube Suction Catheter 8 Fr ,10 Fr , Wound Dressing: Collagen Wound Dressingconsists Of Collagen, Having A Porous Structure With Highly Pronounced Capillary Activity, Enabling It To Absorb Fluid, With The Continuous Absorption Of Exudate Results In The Intake Of Cell Debris As Well As Inflammation Inducing Proteases And Cytokines. 4X6x0.8 Cm , Negative Pressure Wound Therapy System : Collection Bag- For Collection Of Exudates/Blood From Wounds, Having Capacity Of 200 Ml. , Paste: Colostomy Adhesive Paste , Bag: Colostomy Bags 2 Piece Ostomy System Pouch Having Non Woven Polypropylene Covering System Consisting Of Pouch, Flanz & Clamp, Size - 44, 57 & 102 Mm , Colostomy Kit : Colostomy Kit Water Repelling , Cotton: Cotton Wool Absorbant I.P. , Bandage: Crepe Bandage (Porous, Decran Polycoter Material With Longitudional Elastic Threads (10 Per Inch), 4 Sized And Length 4 Meters. , Bandage: Crepe Bandage (Porous, Decran Polycoter Material With Longitudional Elastic Threads (10 Per Inch), 6 Sized And Length 4 Meters. , Knife: Crescent Knife 2.6 Mm , Dissector: Curved 5Mm Dissector, Ergonomically Designed With 360° Rotation With Universal Monopolar Attachment Having 34Cm Length For Laparoscopic Surgery , Co2 Cylinder: Cylinder For Carbon Dioxide Gas (Large) , Co2 Cylinder: Cylinder For Carbon Dioxide Gas (Small) , Solution : Dihydroxy 2-5 Dioxahexane 10-12 Gm , Gluteraldehyde Around 5 Gm , Benzalkonium Chloride Ip-Alkyl Urea Derivative 3-5 Gm Per 100 Gm , Wipes: Disinfectant Wipes: Rapid Cleaning & Disinfectant Wipes Impregnated With 1.4%W/V Hydrogen Peroxide And 0.01% W/V Silver Nitrate , Disinfection Trays : Disinfection Trays (Glutraldehyde) For Instruments:Trays Should Be Stream Sterlizable, Made Of Glass Filled Polypropylene And Bis(Isi)/Ce/Fda. , Syringe: Disposablesyringe With Hypodermic Needle (Sterilised) In I.S. Specification. Size 50Ccas Per Drugs & Cosmetic Act 1940 , Bt Set: Disposable Blood Transfusion Set Specification:Cylindrical Drip Chamber With Nylon Filter, Non-Toxic, Transparent, Medical Garde Pvc With Extra Airway Needle Pack In Sterile Poly Pack, Sterilized/Eto Sterlization,As Per Drugs And Cosmetic Act & Rules 1945 , Cautery Pencil: Disposable Cautery Pencil With Ptfe Coated Electrode Tip For Minimal Sticking In Open Surgery , Sheet: Disposable Draw Sheet 2-1/2 X 3 Made Of Spunlaced Fabric, Absorbant On One Side And Water Repellent On Other Side , Eye Drape: Disposable Eye Drapewith Bag , Catheter: Disposable Foley Catheter Three Way : Silicon Coated(Size 20,22) As Per Drugs & Cosmetic Act , Catheter: Disposable Foley Catheter Two Way : Silicon Coated For Hospital Use As Per Drugs & Cosmetic Actsize 8. , Catheter: Disposable Foleys Catheter Two Way : Silicon Coated For Hospital Use All Sizes.As Per Drugs & Cosmetic Act , Infusion Set: Disposable Infusion Set (Complete Set With Airways) As Per Is_126551988 With Flow Regulator With Direct Supply Sealing Injection Port With Tubing Length Minimum 1500 Mm With Air Way,Specifications: Moulded Drip Chamber With Built In Spike With Flow Meter, Transparent Chamber, Tube Flexible & Kink Resistant, Spare Airway With Filter Plug Packet In Play Bag With, Tear Off Slot Sterile ,As Per Drugs & Cosmetic Act , Infusion Set: Disposable Infusion Set (Complete Set With Airways) Micro Drip Infusion Set Is 8536 With Y Type Inj Port For Extra Medication, Flow Regulator With Direct Supply Sealing Inj Port With Tubing Length Minimum 1500 Mm With Air Wayspecifications:Moulded Drip Chamber With Built In Spike With Flow Meter, Transparent Chamber, Tube Flexible & Kink Resistant, Spare Airway With Filter Plug Packet In Play Bag With, Tear Off Slot Sterile, As Per Drugs & Cosmetic Act , Lancets: Disposable Lancets Length 43 Mm, Pricking Tip 3 Mm Long Stainless Steel. , Laproscopy Camera & Cord Cover: Disposable Laproscopy Camera & Cord Cover Sterilised, Approx. 2 Meter Long , Sheet: Disposable Neonatal Baby Sheets , Sterile Sheet: Disposable Neonatal, Sterile Sheet , Catheter: Disposable O2 Nasal Cannula With Soft Prongs With Universal 15Mm Adapter With Kink Resistant Tubing , Drapes: Disposable Plain Polythene Draper (Degradeable) Ready For Use - Size 120 Cm. X 200 Cm. Sterile By Eto , Syringe: Disposable Syringe With Hypodermic Needle (Sterilized) In I.S. Specification. Size2cc,As Per Drugs & Cosmetic Act 1940 , Syringe: Disposable Syringe With Hypodermic Needle (Sterilized) In I.S. Specification. Size 10Cc As Per Drugs & Cosmetic Act 1940 , Syringe: Disposable Syringe With Hypodermic Needle (Sterilized) In I.S. Specification. Size 1Cc (Insulin Syringe With Needle Hypodermic 29&30G.)As Per Drugs & Cosmetic Act 1940 , Syringe: Disposable Syringe With Hypodermic Needle (Sterilized) In I.S. Specification. Size 20Cc As Per Drugs & Cosmetic Act 1940 , Syringe: Disposable Syringe With Hypodermic Needle (Sterilized) In I.S. Specification. Size 5Cc, As Per Drugs & Cosmetic Act 1940 , Tube: Disposable T Tube(Pvc) Assorted Size. Specifications: Size 20X60 Cm,10, 12, 14, 16, 18 Size Of Tube, Radio Opaque To X- Ray, Soft Siliconized Non Toxic Pvc, Sterile Packed In Double Peel Of Pouch , Uro Bag: Disposable Uro Bag With T Outlet At The Bottom Of The Bag Specification:Graduated Upto 2000Ml Capacity With Moulded Handle , Ultra Soft Pvc Sheeting, Connecting Tube Should Be 100 Cm Long, Sterile , Uro Bag: Disposable Uro Bag With T Outlet At The Bottom Of The Bag Specification:Graduated Upto 2000Ml Capacity With Spore Over Flow Limit, Ultra Soft Pvc Sheeting, Connecting Tube Should Be 100 Cm Long, Sterile , Verres Needle: Disposable Verres Needle 120 Mm , Verres Needle: Disposable Verres Needle 150 Mm , Verres Needle: Disposable Verres Needle 200 Mm , Dj Stent Kit: Dj Stent Kit -All Sizes , H.I.V. Surgeons Kit: Doctor/Medical Staff/Paramedical 4 Packs Each Consists Of - (A) Disposable Surgeons Gown With Water Proof Interlining On Chest 1 Pc., (B) Hood Cap 1 Pc., © Face Mask 1 Pc., (D) Long Shoe Cover 1 Pair, (E) Arm Guard 1 Pair, (F) Disposable Gloves 6.5, 7, 7.5, 8 -2 Pairs Each, (G) Disposable Protective Glases. Patient Pack Consists Of: (A) Cut Sheet 1 Pc., (B) Slit Shett 1 Pc., (C) Drawer Sheet 220 X 120 Cm. 4 Pc., (D) Trolley Cover 4 Pc., (E) Ot Towels 8 Pc., (F) Mayo Standard Cover 1 Pc., (G) Patient Drapes Sheet 1 Pc., (H) Suture Bag 2 Pc., (I) Disposable Bag 1 Pc. , Endotracheal Tube: Double Human Endotracheal Tube 32 G , Endotracheal Tube: Double Human Endotracheal Tube 37 G , Drapes: Drapes: Disposable Plain Polythene Draper (Degradeable) Ready For Use - Size 120 Cm. X 200 Cm. Sterile By Eto , Dressing: Dressing:Transparent Adhesive Sterile Skin Dressing For Adult Use , Mesh: Dual Mesh For Ventral Hernia Repair With Hydrogel Barrier Having Size 6.0 X 8.1 – , Mesh: Dual Mesh With Thermoplastic Polyurethen Nylon Balloon And Inflation Assembly Size 6 Inches , Mesh: Dual Mesh With Thermoplastic Polyurethen Nylon Balloon And Inflation Assembly Size 6X8 Inches , Bowel Preparation: Each 45 Ml Contains :- Monobasic Sodium Phosphate Dihydrate 24.417 Gm, Disodium Hydrogen Phosphate Dihydrate Bp 5.439 G, Sodium Benzoate Ip 0.2% W/V , Bandage: Elastic Adhesive Bandage 10 Cm X 3 M Stretched To 4 M , Bandage: Elastoplast Bandage 4 Inch Width , Disinfectant: Electrolysed Non-Toxic, Non-Irritant And Non-Corrosive, Ready To Use Disinfectant Solution With Neutral Ph Containing Sodium Chloride (Na Cl)- 0.023%, Sodium Hypochlorite (Naocl)- 0.005%, Hypo Chlorous Acid (Hocl)- 0.004%, Electrolysed Water- 99.97% In Jerricane Of 5 Litre , Endometrial Cannula: Endometrial Cannula For Endometrial Aspiration, Pipette, Flexible, Suction Cannula With Outer Diameter Of 3 Mm And Plunger Inside For Suction. Disposable. Sterily Packed. Made Of Medical Grade, Latex Free Plastic. (Size 6 To 12) , Clip Applier : Endoscopic Multi Clip Applier Disposable Of 5Mm Diameter Having Titanium Clips Size Medium And Large . , Clip Applier: Endoscopic Rotating Clip Applier 10Mm Diameter With 20 To 30 Preloaded Titanium Clips Medium/Large Size. , Clip Applier: Endoscopic Rotating Clip Applier Disposable 5 Mm Diameter With 12 To 15 Preloaded Titanium Clips Of Medium Large Size (Lt300) With Shaft Length Of 33Cm & Closed Clip Length Of 8.8Mm. , Mesh: Eptfe Dual Mesh For Ventral Hernia Repair Having Size 4.2X 6.2- , Fixation Device: Et Tube Fixation Device (Neonatal)With Hydrocolloid Adhesive Tapes. , Fixation Device: Et Tube Fixation Device (Paediatrics) With Hydrocolloid Adhesive Tapes , Extractor: Extractor: 5Mm Babcock Disposable Extractor, Ergonomically Designed With 360° Rotation With Ratchet Mechanism Having 34Cm Length For Laparoscopic Surgery , Extractor: Extractor: 5Mm Babcock Extractor, Ergonomically Designed With 360° Rotation With Ratchet Mechanism Having 34Cm Length For Laparoscopic Surgery , Tulle: Feracrylum 3% W/W Tulle Sheet , Gel: Feracrylum Gel 3% W/W , Casting Tape: Fiberglass Free Poly Propylene (Polyester) Casting Tape, With 3 Dimentional Stretch Ability, Mould Ability, Conformability Provides Semi-Rigid And Rigid Casting Options For Primary And Secondary Casting Applications Where Working Time 0 To 3 Min, Set Time 3To 20Min Finished Cast Should Be Moisture Resistant Cast Padding Made Up Of Polypropylene, Nylon And Polyster Combined Fibre In A 3D Knit.-10Cm X 3.6M & 10Cm X 2.4M , Casting Tape: Fiberglass Free Poly Propylene (Polyester) Casting Tape, With 3 Dimentional Stretch Ability, Mould Ability, Conformability Provides Semi-Rigid And Rigid Casting Options For Primary And Secondary Casting Applications Where Working Time 0 To 3 Min, Set Time 3To 20Min Finished Cast Should Be Moisture Resistant Cast Padding Made Up Of Polypropylene, Nylon And Polyster Combined Fibre In A 3D Knit.-12.5Cm X 3.6M & 10Cm X 2.4M , Fibre Glass Cast Tape: Flexible Fibre Glass/Polyesterimpregnated Unit Polyurethane Resin Activated By Water (4Inch) , Fibre Glass Cast Tape: Flexible Fibre Glass/Polyester Impregnated Unit Polyurethane Resin Activated By Water (5Inch) , Fibre Glass Cast Tape: Flexible Fibre Glass/Polysterimpregnated Unit Polyurethane Resin Activated By Water (6Inch) , Folded Surgical Pre-Sterilized Gauze: Folded Surgical Pre-Sterilized Gauze: Gama/ Eto, Resultant 3X3 , Haemorrhoid Stapling Device: For Haemorrhoidectomy , Marker Pen: For Surgical Preparation, Bactericidal, Antifungal, Gention Violet Ink , Sterile, Individually Packed , Dressing: Four Layered Absorbent With Flex Cut Technology For 360 Degree Movement And With Soft Silicon Wound Contact Layer For Atraumatic Dressing (Assorted Size) , Cream: Framycetin Sulphate Cream 1% , Gauge: Gauze Surgical 90 Cm X 18 Mtrs Selvedge On Both Side, Schedule F-Ii) And Rule 124-C Of Drugs And Cosmetics Act, 1940 And Rule, 1945 For Surgical Dressings Vide Govt. Of India Notification No. Gsr-318E) Dt 1-5-1984. , Gelatin Pad: Gelatin Pad: Size 80 Mm X 50 Mm X10 Mm, (Porcine Gelatine Sponge), As Per Drugs And Cosmetic Act & Rules 1945 , Gelatin Pad: Gelatin Pad:Size2X3inch Oxidized Regenerated Cellulose Bacteriocidal Low Ph, As Per Drugs And Cosmetic Act & Rules 1945 , Gelatin Pad: Gelatin Pad:Surgical :Size 1X2 Oxidized Regenerated Cellulose Bacteredeal Low Ph, As Per Drugs And Cosmetic Act & Rules 1945 , Solution: Gentionviolet Paint 0.5% B.P. , Liquid: Glycerine Pure I.P. , Grasper: Grasper: Straight Atraumatic 5Mm Grasper, Ergonomically Designed With 360° Rotation With Ratchet Mechanism Having 34Cm Length For Laparoscopic Surgery , Green Armytage Foreceps: Green Armytage Foreceps -10 Size : High Grade Stainless Steel, Non Rust, Non Magnetic C E Make. , Haemorhoids Band Applicator Set : Haemorhoids Band Applicator Set , Electrode: Hand Held, Disposible, Monopolar, Pencil Electrode For Diathermy , Head Halter Traction Kit: Head Halter Large , Head Halter Traction Kit: Head Halter Medium , Head Halter Traction Kit: Head Halter Small , Heamostatic (Local) Agent: Heamostatic (Local) Agent: Absorbable Haemostat (Drc) With Thick Weave Fabric Based Can Be Sutured And Is Bactericidal , Hemorrhoidal Stapler: Hemorrhoidal Stapler: Hemorrhoidal Stapler Kit Consists Of 33Mm Hemorrhoidal Circular Staplerwith Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm – 1.5 Mm, Staple Open Leg Length Of 4 Mm, Suture Threader, Circualar Anal Dilator, Purse-String Suture Anoscope, Suture For Purse String. , Mesh : Hernia Mesh/Patch For Open Ventral Hernia Repair With Uncoated Monofilament Polypropylene Mesh On One Side With Absorbable Barrier Consisting Of Carboxy Methyl Cellulose, Sodium Hyluronate And Polyethylene Glycole On Other Side With Strap Having Size Of 8 Cm Circle , Hook Wire: Hook Wire :Laparoscopic L Hook Wire Electrode With Ptfe Coating For Minimal Tissue Sticking 33 Mm , Laproscopic Hook: Hook:Laproscopic L Hook Electrode With Ptfe Coating For Minimal Tissue Sticking 33 Mm , Mesh : Hydrogel Based Tissue Seperating Laproscopic Hernia Repair Mesh With Monofilament Polypropylene On One Side And Absorbable Hydrogel On Other Side To Prevent Adhesion With Usa Fda Approved Of Size 15.2 Cm Circle , Mesh : Hydrogel Based Tissue Seperating Laproscopic Hernia Repair Mesh With Monofilament Polypropylene On One Side And Absorbable Hydrogel On Other Side To Prevent Adhesion With Usa Fda Approved Of Size 15X20 Cm Circle , Infusion Set: I.V. Infusion Set With Flowmeter(Flow Regulator) To Adjust The Drops Per Minutes , Spirometer : Incentive Spirometer Consist Of Base And Central Section Devided Into Three Chamber With Three Sphercial Ball Of Different Colour. Allows Step By Step Manner Breathing Exercise.Short Corrugated Tubing With Mouth Piece For Easy And Comfortable Access.Can Be Diassembled And Cleaned. , Tube: Infant Feeding Tube Assorted Size Specification:Length 50-52 Cm, Size 5 To 10, Two Lateral Eyes With Super Smooth Tip,Cm Markings At 1Cm Interval, Radio Opaque Line Non-Toxic, Non-Irritant Pvc, Sterile Packing In Double Peel Off Pouch , Infant Feeding Tube: Infant Feeding Tube: Assorted Size Specification:Length 52 Cm, Size 5 To 10, Two Lateral Eyes With Super Smooth Tip,Cm Markings At 1Cm Interval, Radio Opaque Line Non-Toxic, Non-Irritant Pvc, Sterile Packing In Double Peel Off Pouch , Insufflation Tubing: Insufflation Tubing:Medical Grade Insufflation Tubing With Luer Lock Or A Dual Connector ,Kink Resistant,Non Rubber & Non Latex,Length 8-10 Feet. , Keratome : Keratome 2.8 Mm , Keratome: Keratome 3.2 Mm , Key Spanner: Key Spanner For B-Type Carbon Dioxide Cylinder . , Knee Cap: Knee Caps, Small/Medium/Large , Knife Electrode: Knife Electrode For Resectoscope , Endo Cutter: Laparoscopic Battery Operated 60Mm Articulatingendo Cutter With A Disposable Battery Pack,360 Degree Rotation Shaft, One Handed Natural Articulation Up To 45 Degrees, Precision Machined Anvil, Wide Proximal To Distal Jaw Aperture (Proximal 8Mm,Distal 22Mm), 3 Point Gap Control, Knife Direction/Reverse Control, Interchangeable 6 Row Cartridge Options Of White,Sblue,Gold,Green, Black, All Fits Down To 12Mm Trocar Sleeve, 340 Mm Shaft Length , Leech Willkinson Hsg Cannula: Leech Willkinson Hsg Cannula:High Grade Stain Steel, Non Rust, Non Magnetic C E Maker , Levonorgestral Intra Uterine Device: Levonorgestral Intra Uterine Device:Polyethylene T Shaped Frame Intrauterine Device With Levonorgesterol Hormone. 52 Mg Of Levonorgesterol Which Releases 20 Mcg Of The Drug Per Day And With Duration With 3 To 5 Years,Contained In Sterile Non-Toxic Package With Self Inserter. , Jelly: Lignocaine 2%Jelly , Linear Cutter Cartridge: Linear Cutter Cartridge: Universal Linear Cutter Cartridge 55Mm For Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 55Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge. 6 Rows 3-D Staple Technology. , Linear Cutter Cartridge: Linear Cutter Cartridge: Universal Linear Cutter Cartridge 75Mm For Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 75Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge. 6 Rows 3-D Staple Technology , Linear Cutter: Linear Cutter: Selectable Staple Height Open Linear Cutter 55Mm Having 6 Rows Of Staple Line, Staple Height Selector With Cartridge Having Selectable Closed Staple Height Of 1.5Mm/1.8Mm/2Mm & Integrated New Knife Blade,Intermediate Locking Position, Two Sided Firing, Staple Line Of 61Mm & Cut Line Of 58Mm. , Linear Cutter: Linear Cutter: Selectable Staple Open Height Linear Cutter 75Mm Having 6 Rows Of Staple Line,Having Staple Height Selector With Cartridge Havingselectable Closed Staple Height Of 1.5Mm/1.8Mm/2Mm & Integrated New Knife Blade, Intermediate Locking Position, Two Sided Firing, Staple Line Of 81Mm & Cut Line Of 78Mm , Lint Cloth : Lint Cloth Soft Water Absorbent Cloth 60 Cm X 75 Cm , Impregnated Gauze: Liquid Paraffin Impregnated Gauze (10Cm X 10Cm) , Liquid: Liquid Paraffin Light I.P. , Aspiration Needle: Liver Absece Aspiration Needle (Thin Vold Procar Needle Steralized & Made Of Steel) , Aspiration Needle: Liver Absece Aspiration Needle (Thin Vold Procar Needle Steralized & Made Of Steel) , Lugol Iodine: Lugol Iodine 4 % , Traction Kit: Lumbar Traction Kit ( Adult) , Solution: Lysol Solution I.P. , Macintosh: Macintosh Tr, Manufacturer Name/ Logo At Each Meter , Powder: Magnesium Sulphate I.P. , Infusion Set: Measure Volume Fluid Infusion Disposable Set Specifications:With Hard Acrylic Chamber With Floating Auto Shut Valve (Non Latex) To Prevant Air Traping With Hanger And Separate Siliconised Y Shape Medicine Port, Luerlock Capacity 110 Ml As Per Drugs & Cosmetic Act 1940 , Mesh: Mesh: Two Point Absorbable Mesh Fixator , Mesh: Mesh:Tissue Separating Multilayer Mesh For Intra-Abdominal Open And Laparoscopicventral Hernia Repair. Soft Polypropylene Mesh Clubbed With Polydiaxanone Layer And Has An Oxidized Regenerated Cellulose On Visceral Side.(Size-15Cmx15cm) , Tape: Micropore Surgical Tape: 5 Cm X 9 Mtrs , Tape: Microporous Surgical Tape:7.5 Cm X 9 Mtrs , Microporous Surgical Tape: Microporous Surgical Tape:7.5 Cm X 9 Mtrs , Tape: Microporous Surgical Tape: 2.5 Cm X 9 Mtrs , Microporous Surgical Tape: Microporous Surgical Tape: 2.5 Cm X 9 Mtrs , Microporous Surgical Tape: Microporous Surgical Tape: 5 Cm X 9 Mtrs , Mvr: Microvitreoretinal (Mvr) Blade 20G , Drain: Mini Vaccum Drain 50 Ml , Suture: Monofilament Polypropylene 5-0 X 115 Round Body , Wound Dressing: Monofilamentous Pad Which Absorb Exudate, Cellular Debris And Keratosis During Debridement, Gentle On Intact Tissue. Debridement Of Superficial, Chronic And Acute Wounds And The Skin Surrounding The Wound. Angled Fibre Tips Remove Debris Effectively From The Wound And Preserve Already Intact Tissue; The Fibre Composite Also Removes Skin Flakes And Keratosis From Skin Surrounding The Wound; Visible Results Quickly While Being Easy And Safe To Use, Soft Fibres Ensure Virtually Painless Application, Increasing Patient Acceptance.10X10 Cm , Cannula: Mtp Suction Cannula With Cm Markings And Colour Coded Adaptors,Size 3 To 10 , Mtpcannula: Mtp Suction Cannula With Cm Markings And Colour Coded Adaptors, Size 4 To 12 , Mucus Extractor: Mucus Extractor With Adaptor 20-25 Ml , Multi-Enzyme Detergent: Multi-Enzyme Detergent : 1. Multi Enzyme Detergent With Four Enzymes – Protease, Amylase, Lipase And Cellulase. 2. Multi Enzymatic Detergent Should Have Sodium Tetraborate Decahydrate. 3. It Should Have Anlonic Surfactants And Low Foaming Detergent. 4. Should Be Used In Manual And Automated Systems. 5. Effective Manual Cleaning Time Should Not Exceed 3 Minutes. . 6. Multi Enzymatic Detergent Dilution Should Not Exceed 8 Ml Per Litre For Effectivemanual Cleaning. 7. Dilution In Automatic Endoscopic Reprocessor And Washer Disinfector Should Be Less Than 5 Ml Per Liter. , Mesh: Multilayer (Polydiaxone Polypropylene, Polydioxone Oxidised Degenerated Cellulose) Tissue Seperating Mesh 15Cm X 15Cm , Clip Applier : Multiple Clip Applier Disposablepreloaded Titaniumclips Of Small , Medium And Large Size For Open Surgery. , Multiple Clip Applier : Multiple Clip Applier For Leprosocpic Cholecystectomy Medium Size Titanium Clips , Syringe: Mva Syringe (Medical Vaccum Aspiration) With Assorted Cannula , N-95 Face Mask: N-95 Face Mask - (Bis Certification) Isi Mark , Antimicrobial Silver Dressings: Nano Crystalline Silver Dressing With Silcryst Technology Having Sustained Release Of Silver 70-100 Ppm For 72 Hours, Made Of Rayon Polyster Mesh Sandwiched Between Polyethylene Layers Binded With Ultrasonic Welds Effective Against Mrsa & Vre & Superbug 20Cm X 40Cm. Make In India , Tube: Naso Gastric Suction Tube Ryles, All Sizes Including Size Exceeding 100 Cm. , Naso Gastric Suction Tube Ryles: Naso Gastric Suction Tube Ryles, All Sizes Including Size Exceeding 100 Cm. , Tube: Naso Gastric Suction Tube Ryles, All Sizes Including Size Upto 100 Cm. , Naso Gastric Suction Tube Ryles: Naso Gastric Suction Tube Ryles, All Sizes Including Size Upto 100 Cm. , Catheter: Needle Free Connector - Doublelumen , Catheter: Needle Free Connector - Single Lumen , Catheter: Needle Free Connector - Tripplelumen , Catheter: Needle Free Connector For I V Bottle , Needle Holder: Needle Holder: Self-Righting Reusable Needle Holder Conducting Auto-Correction For Needle Holding Angles 5Mm Diameter With Palm Type Handle (For Laproscopy) , Catheter: Nelaton Catheter Size 12,14,16,18 , Adhesive: Neonatal (Transparent Adhesive) For Iv Cannula / Skin Probes , Neonatal Diaper : Neonatal Diaper With Absorbent Material With Wetness Indicator Forless Than 2.5 Kg Baby Weight - Pack Of 10 , Neonatal Diaper : Neonatal Diaper With Absorbent Material With Wetness Indicator Forless Than 5 Kg Baby Weight- Pack Of 10 , Neonatal Diaper : Neonatal Diaper With Absorbent Material With Wetness Indicator For 2.5 Kgto 5 Kg Baby Weight- Pack Of 10 , Trochar: Neonatal Trochar For Chest Drainage With Connector , Urine Bag: Neonatal Urine Bag , Fixation Device: Non Absorvable And Non Metalic Fixation Fasteners Made Of Permanent Acetyl Polymer - 5.9Mm Depth Of Tissue , Threaded Holow Core 3 Mm Obturator Designed, Blunt Tip For Minimum Tissue Trauma With Number Of Available Tacks Indicator. Size 30 Fasteners , Liquid: Non Phenolic Anti Septic Liquid : Benzylkonium Chloride Sol.40 % +Disodium Edetate 1.5% , Liquid: Non Phenolic Anti Septic Liquid : Chloroxylenol 4.8% +Terpineol 9% (Complete Formula With Rwc) I P. , Surgical Snow: Non-Oxidised, Non-Regenerated Cellulose Surgical 10X10cm (4X4 Inch) , Surgical Snow: Non-Oxidised, Non-Regenerated Cellulose Surgical 20X30cm (8X12 Inch) , Surgical Snow: Non-Oxidised, Non-Regenerated Cellulose Surgical 5X10cm (2X4 Inch) , Surgical Snow: Non-Oxidised, Non-Regenerated Cellulose Surgical 5X5cm (2X2 Inch) , Surgical Snow: Non-Oxidised, Non-Regenerated Cellulose Surgical 8X100cm (3.2X40 Inch) , Surgical Snow: Non-Oxidised, Non-Regenerated Cellulose Surgical 8X20cm (3.2X8 Inch) , Suture: Nylon Black Monofilament 3/8 Circle Double Needle 6 Mm, 30Cm. C.S. Ultima ,10-00 , Suture: Nylon Black Monofilament Cutting 3/8 Circle Size 1-0 , Suture: Nylon Black Monofilament Cutting 3/8 Circle, 3-0 , Suture: Nylon Black Monofilament Cutting 3/8 Circle, 4-0 , Suture: Nylon Black Monofilament Cutting 3/8 Circle, 5-0 , Suture: Nylon Black Monofilament Reverse Cutting 3/8 Circle, 1 , Suture: Nylon Black Monofilament Reverse Cutting 3/8 Circle,1-0 , Suture: Nylon Black Monofilament Straightcutting 60 Mm, 70 Cm, 2-0 , Suture: Nylon Monofilament Double Armed On Spatulated Needle 8-0 , Trocar : Optically Guideddisposablebladeless Trocar 5Mm/11Mm/12Mm/15Mm With Bilateral Tissue Separators, Length 75Mm/100Mm/150Mm, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer. , Gloves: Ortho Gloves Latex Gama / Etosterilized, Isi Mark Sizes 6, 6.5, 7, 7.5,8 , Sponge: Oxidized Regenerated Cellulose (Surgical ) For Hemostasis. , Hemostat : Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar/Layer Form, With Bactericidal Property. Fibril Material (7 Layers) For Broad Surface Area Coverage. Approved By Us Fda Size 1X2 Inch , Hemostat : Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar/Layer Form, With Bactericidal Property. Fibril Material (7Layers) For Broad Surface Area Coverage. Approved By Us Fda Size 2X4 Inch , Surgical Snow: Oxidized Regerated Cellulose Bactericidal Non Woven In Fibrous Form Size 4X4 , Hemostat: Oxidized, Regenerated, Cellulose, Topical, Absorbable Hemostat,Fibrous Form, Multilayered, Non Woven Cotton Material Bactiricidal Property Size 2 X 4 Inches , Uro Bag: Paediatric Urine Collecting Bag With Hypoallergic Adhesive Capacity 100 Ml. , Alchol Swab (Single Use): Paper Based Swab Impregnated With Alcohol Sufficent To Swab And Sterilize Vascular Acess Site.Packed In Puncture Proof Water Proof Peel Pack. , Suture : Pds Suture, Monofilament, Usp 4-0, 16Mm, 3/8 Circle Reverse Cutting Ps3 Needle Length 45 Cm , Catheter: Peadiatrics Urine Balloon Catheter Size 5,6,8,10 , Catheter: Pediatrics Long Line -3 Lumen Catheters With Guidewise With Dilator , Catheter: Percutaneous Invasive Central Catheter (Picc), 1Fr.,2Fr. , Fixation Device: Permanent Non Metallic Tacks For Hernia Fixation Having 5 Mm Tacks (30 Fasteners) , Wound Dressing: Phmb Antimicrobial Hydrobalance Wound Dressings Act Against A Large Spectrum Of Pathogens. Additionally, Depending On The Wound Condition, The Products Can Either Provide The Wound With Moisture Or Absorb Excess Exudate. The Product Creates A Moist Wound Environment. Dressing Change Is Atraumatic. The Material Can Simply Be Adjusted To The Wound Shape And Depth. The Products Are Suitable For Parts Of The Body Which Are Difficult To Dress. The Positive Properties Of The Product Counter A Possible Adhesion To The Wound Or To The Secondary Dressing. The Moist Environment With A Cooling Effect Is Perceived As Pleasant And Soothing By The Patients. 14X20 Cm , Pigtail Cathetor Dranaige Set : Pigtail Cathetor Dranaige Set , Pigtail Cathetor Dranaige Set : Pigtail Cathetor Dranaige Set (Made Of Medical Grade Polyurethene & Radio Opaque) , Powder: Plaster Of Paris , Pmma Iol: Pmma Iol - Non - Foldablec- Loop Haptic, 5.5 Mm,6 Mm, 6.5 Mm Optic Size ( 12 Mm Lens Size ) Iol , Suture: Poly Dioxonon Ii Loop Suture 1/2 Circle, R.B. Heavy, 50 Mm, 150 Cm, Size-1 , Suture: Poly Dioxonon Ii: 1/2 Circle R-B 30 Mm, 70-80 Cm.,3-0 , Suture: Poly Dioxonon Ii: 1/2 Circle R-B 31 Mm, 70-80 Cm. Box Of 36,2-0 , Suture: Poly Galactin 1/4 Circle Micro Point Spatulated Double Needle 8 Mm, 45-50 Cm.,6-0 , Suture: Poly Glactin 910 1/2 Circle Conventional Cutting 16 Mm,45 -50Cm. 5-0 , Suture: Poly Glactin 910 1/2 Circle Conventional Cutting 16 Mm,45-50 Cm 6-0 , Suture: Poly Glactin 910 1/2 Circle Cutting, 3-0 , Suture: Poly Glactin 910 Rapid Undyed Tapercut: 1/2 Circlebodied Triclosan Antibacterial 35 Mm, 90 Cm Size 2-0 , Suture: Poly Glactin 910, 1/2 Circle Rb 16 Mm - 45-50 Cm, 3-0 , Suture: Poly Glactin 910: 1/2 Circle Round Body 40 Mm, 90 Cm , 1-0 , Suture: Poly Glactin 910: 1/2 Circle Round Body Triclosan Antibacterial 30 Mm, 90 Cm, 2-0 , Suture: Poly Glactin 910: 1/2 Circle Round Body Triclosan Antibacterial 40 Mm, 90 Cm, 1 (One) , Suture: Polyglactin 1/2 Circle, Cutting 3.0 , Suture: Polyglactin 1/2 Circle, Round Body, 90/45Cm, 3.0 , Suture: Polyglactin 5/8 Circle, Cutting 4.0 , Suture: Polyglactin 910 Round Bodied Triclosan Antibacterial Impregnated 1/2 Circle Round Bodied Size-4-0 , Suture: Polyglactin 910: 3/8 Circle Cutting, 5-0 , Suture: Polyglactin 910: 3/8 Circle Round Bodied, 3-0 , Suture: Polyglactin 910: 5/8 Circle Cutting 16 Mm, 45 Cm, 4-0 , Suture: Polyglactin Triclosan Antibacterial Impregnated 910 Round Bodied1/2 Circle Cutting Size-3-0 , Suture: Polypropelene 3/8 Circle Round Bodied, Double Needle 9Mm 60 Cm(7-0) , Mesh: Polyproplyene Mesh, Atleast7.5 Cm X 15 Cm. , Suture: Polypropylene 1/2 Circle (Double Needle) R.B. 12 Mm, 70-80 Cm, 5-0 , Mesh : Polypropylene Mesh, 15 Cm X 15 Cm. , Mesh: Polypropylene Mesh, Monofilament 15 Cm X 15 Cm. , Mesh: Polypropylene Mesh, Monofilament 7.5 Cm X 15.2 Cm. , Pop Bandage: Pop Bandage Ip Sizes ( 6Inch) , Pop Bandage: Pop Bandage Ip Sizes (4 Inch) , Paste: Potassium Nitrate 5% Paste , Solution: Povidone Iodine (Cleaning) Solution 7.5% (Surgical Scrub Solution) , Solution: Povidone Iodine 10% (Equivalent To 1% W/V Available Iodine) , Solution: Povidone Iodine 10% Equivalent To 1% W/V Available Iodine , Lotion: Povidone Iodine Lotion 5% W/V , Suture: Precut Surgical Black Braided Silk 2X75 Cm. ,1 , Suture: Precut Surgical Black Braided Silk 2X75 Cm. ,2-0 , Protection Sheet For Mattress: Protection Sheet- Non Absobent, Breathable And Water Resistant Barrrier Sheet Which Protects Your Mattress From Liquid Spills. It Pravents Body Fluids Like Urine, Sweat And Other Liquids From Penetrating Into Mattress 7X4 Made Of Spunlaced Fabric, Absobant On One Side And Water Repellent On Water Other Durable, Economical, Highly Absorbent, Dustproof, Mothproof, Waterporrf, Amti- Statoc, Anti Bacteria Et , Wound Care Solution: Radius Of Clot – 3Cm (Diameter 6Sq Cm), Clot Size: 28.3Sq Cm,20Ml Of Blood Required,Storage Conditions - Store In The Original Container At A Room Temperature Of 5°C (41°F) – 30°C (86°F). Protect From Freezing And Avoid Excessive Heat. Based On Reddress’ Proprietary Patented Technology, Is A Fda-Cleared Wound Care Solution That Enables Health Care Providers To Produce—In Real Time—In Vitro Blood Clots From A Patient’S Whole Blood. , Cylinder Regulator: Regulator For Type B Carbon Dioxide Cylinder. , Bandage: Rolled Bandage 10 Cm X 4 Mtrs, Schedule Fii And Rule 124-C Of Drugs And Cosmetics Act, 1940 And Rule, 1945 For Surgical Dressings Vide Govt. Of India Notification No. Gsr-318E) Dt 1-5-1984. , Bandage: Rolled Bandage 15 Cm X 4 Mtrs, Schedule F-Ii And Rule 124-C Of Drugs And Cosmetics Act, 1940 And Rule, 1945 There On For Surgical Dressings Vide Govt. Of India Notification No. Gsr-318E) Dt 1-5-1984. , Bandage: Rolled Bandage 6 Cm X 4 Mtrs, Schedule F-Ii And Rule 124-C Of Drugs And Cosmetics Act, 1940 And Rule 1945 For Surgical Dressings Vide Govt. Of India Notification No. Gsr-318E) Dt 1-5-1984. , Rubber Bands For Banding Of Haemorhoids: Rubber Bands For Banding Of Haemorhoids , Blade: Scalpel Blade , Isi/ Ce/Fda Are Acceptable All Sizes , Scissors: Scissors: Curved 5Mm Scissor, Ergonomically Designed With 360° Rotation With Universal Monopolar Attachment Having 34Cm Length For Laparoscopic Surgery , Biopsy Gun: Semi Automatic Biopsy Gun With Dual Penetration Throw Of 10 & 20 Mm. Should Be Available With One Gauze Lower Compatible Co-Axial Needle With Fire Ready Indicator. Should Be Available With A Blunt Tip Needle. Available In 18 & 20 Gauzes With Lengths Of 10, 16 & 20 Cms Usfda Approval , Peripheral Venous Catheter: Silicon Catheter With Markings Every Cm + Introducer Winged Needle Type , Suture: Silk Black Braided :1/2 Reverse Cutting 45 Mm, 76 Cm. ,1-0 , Suture: Silk Black Braided :3/8 Reverse Cutting 45 Mm, 76 Cm. ,1-0 , Suture: Silk Black Braided 3/8 Circle Cutting,16Mm,70-80Cm,4-0 , Suture: Silk Black Braided 3/8 Circle Cutting 16 Mm, 76 Cm ,3-0 , Suture: Silk Black Braided 3/8 Circle, Round Bodied, 16 Mm, 70-80 Cm. 3-0 , Suture: Silk Black Braided: 1/2 Circle R-B 30 Mm, 90 Cm.2-0 , Suture: Silk Black Braided: 1/2 Circle Taper. Cut 25 Mm, 70-80 Cm. ,2-0 , Suture: Silk, Reverse Cutting Needle 5-0 , Suture: Silk, Round Body 3-0 , Cream: Silver Sulphadiazin 1% W/W Cream , Skin Stapler: Skin Stapler: Stapler 35 Sterile 6.9 Mm X 3.9 Mm With Alignment Indicator And Staple Remover , Suture: Slik Surgical Black Braided 2X75 Cm. , 1-0 Without Needle , Suture: Slik Surgical Black Braided 2X75 Cm. ,1(One) Without Needle , Suture: Slik Surgical Black Braided 2X75 Cm. ,2-0 Without Needle , Solution: Solution Super Oxidized With Neutral Ph Containing Hydrochlorous Acid (0.003%) And Sodium Hypochorite (0.004%) For Wound Treatmentin Spray Bottle. , Pressure Line: Spiral Control Pressure Line 200 Cm. Long, Internal Diameter 1Mm Outer Diameter 2 Mm. , Suture: Spiral Polydiaxanone Symmetric Knot Lesstriclosan Coated Antibacterial 36 Mm , 1/2 Circle Taper Point Length 45 Cm Undyed Size 2-0 With Fixation Tab , Suture: Spiral Polydiaxanone Symmetric Knot Less Poliglecapone Triclosan Coated Antibacterial 40 Mm , 1/2 Circle Taper Point Length 45 Cm Undyed Size 1-0 , Pop Splint: Splint Made By Hydrophilic Polyurethane(Pop) High Grade Foam And Cotton Flannel With 15 Layers Size 4 Width Length 288 , Ce And Fda Approved , Imported Make , Pop Splint: Splint Made By Hydrophilic Polyurethane(Pop) High Grade Foam And Cotton Flannel With 15 Layers Size 5 Width Length 288 , Ce And Fda Approved , Imported Make , Spray : Spray Lidocaine Usp 1.0% W/W, Cetrimide Ip 0.1% W/W, Polyvinyl Polymer 2.8 % W/W, Sovent And Propellent Q.S. To 100% W/W (Antiseptic Bandage Spray Mistdress) , Biopsy Gun: Spring Loaded Fully Automatic Core Biopsy Gun With One Handed Cocking Machenism With Non Roll Handle Design. Should Have Angled Sample Notch With Choice Of Two Firing Buttons. Should Be Available In 14, 16 , 18 & 20 Gauges With Length 10Cm , 16 Cm, 20 Cm & 25 Cm Usfda Approval , Hip U Drape: Spun Lace Fabric Water Repellant Head Sheet Sized 1X1.5 M Adhesive Strip 4 Cm.X1.5 Mts U Sheet 1.75X1.5 M With 24 Cm. Around, U Cut 2 Cm.X20 Cm. Poly Sheet Lining 1 X 1.25 Mts Presterilized , O-Knee Drape: Spun Lace Fabric Water Repellant Over All Sized 150X250 Cm. Elastic Aperture 8 Cm. Diameter Presterilized , Stapler Reload: Stapler Reload: Endoscopic Linear Cutter Cartridge With Gripping Surface Technology Having 60Mm Staple Line, White/Blue/Gold/Green/Black Cartridge Having Closed Staple Height Of 1.0Mm/1.5Mm/1.8Mm/2.0Mm/2.3Mm Respectively, Compatible With All Range Of Endoscopic Linear Cutter 60Mm. , Skin Stappler: Stappler 35 Sterile 6.9 Mm X 3.9 Mm With Alignment Indicator With Remover , Steel Bivalve Cuscos Speculum : Steel Bivalve Cuscos Speculum (Small, Medium , Large) , Verres Needle: Steel Verres Needle 120 Mm , Verres Needle: Steel Verres Needle 150 Mm , Cannula: Sterile Mtp Suction Cannula With Cm Markings And Colour Coded Adaptors,Size 6 To 12 ( Sterilized) , Gauge: Sterile Paraffin Gauze Dressing , Suction Tube With Connector: Sterile Suction Tubing With Universal Connector, 8 Mm X 3.5M , Sterile Suction Tubing: Sterile Suction Tubing With Universal Connector, 8 Mm X 3.5M , Sterilized Surgical Blades: Sterilized Surgical Blades All Sizes , Gauge Pad: Sterilized, Absorbable Surgical Gauze Pad, 8 Layered, 8X8 With Radio Opaque Wire, Tail Tape 8 Long Dispensed In Two Layered , Temper Proof , Sterlized Marker Pen: Sterlized Marker Pen With Plastic Scale , Catheter: Sterlized Umbilical Catheters Size 3.5 Fg 5 Fg,6 Fg , Gauge Pad: Sterlized, Absorbable Surgical Gauze Pad, 8 Layered, 12X12inch With Radio Opaque Marking And Thread Handle, (Gamma / Eto) Sterilized , Wound Dressing: Super Absorbent Dressing, Sterile, Consists Of A Wound Pad Of Rectangular Shape. The Clothing Protection, The Absorbent Core And The Non-Woven Distribution Layer Are Of The Same Size. The Multi-Layer Core Of The Dressing Is Covered By A Wrapped Around Wound Contact Layer, Forming Wound Contact Side And Back Side. This Wrapped Around Layer Is Glued Lengthwise With A Blue Coloured Hot Melt-Thread Forming A Tube. Both Opposite Cutting Edges Of The Wrap Are Closed With A Hot Melt Adhesive Consisting Cellulose And Polypropylene,Sterile Dressing 20X25 Cm , Supra Pubic Catheter: Suprapublic Drainage (Disposable), Supra Cath (Pvc) Sterilised Size : 16,18,20,22 , Surgeons Gown: Surgeons Gown, Air Porous, Water Repellent On One Side, Absorbant On Other Side With Stretchable Cotton Cuffs On Sleeves And Disposible And Presterile, Added Absorbant On Front Side Of Gown To Be Dispensed In Double Packing (Temper Proof) - Blue (Large Size) , Surgeons Gown: Surgeons Gown, Air Porous, Water Repellent On One Side, Absorbant On Other Side With Stretchable Cotton Cuffs On Sleeves And Disposible And Presterile, Added Absorbant On Front Side Of Gown To Be Dispensed In Double Packing (Temper Proof) - Blue (Medium Size) , Surgical Caps : Surgical Caps Disposable Circumferential Elastic Band , Surgical Face Mask: Surgical Face Mask Moisture Resistant 03 Ply Disposable With Mininum 90% Anti Bacterial Filter (Bis Certification) Isi Mark , Surgical Gown: Surgical Gown With Film-Reinforced With Set In Sleeves With 1 Hand Towel:- Sms Barrier Fabric, Set In Sleeves, Adjustable Comfort-Soft Hook And Loop Closures, Film Reinforced, Sleeve-N-Sleeve Construction, Extra Wide Film Reinforcement , Drapes: Surgical Incision Adhesive Drape , Face Mask: Surgical Moisture Resistant Double Protection Face Mask Disposable With Mininum 90% Anti Bact. Filter , Suture: Surgical Silk Black Braided 6 Reels X 25 Meters, 1-0 , Suture: Surgical Silk Black Braided 6 Reels X 25 Meters,2-0 , Suture: Sutupak Surgical Black Braided 2X75 Cm. , 1-0 , Suture: Suture:1/2 Circle Taper Point, 40Mm, Pds Plus, Unidirectional With Fixation Tab, 60 Cm, 1, 12 , Suture: Suture:1/2 Circle Taperpoint Needle, 36Mm, Pds Plus Spiral Unidirectional 30Cm, 2-0, 12 , Suture: Suture:1/2 Circle, Reverse Cutting, Os-6, 36Mm, Pds Plus, Unidirectional With Fixation Tab, 60 Cm, 1, 12 , Suture: Suture:1/2 Circle, Taper Point, Ct-1, 36Mm, Pds Plus, Unidirectional With Fixation Tab, 45 Cm, 0-12 , Suture: Suture:Poly Glactin 910 Rapid Undyed Tapercut: 1/2 Circlebodied Triclosan Antibacterial 35 Mm, 90 Cm Size 2-0 , Suture: Suture:Synthetic Fast Absorbing Gamma Irradiated Undyed Polyglactin 910 Braided Suture With 1/2 Circle Round Body, 110 Cm Size -1-0 .40 Mm , Suture : Synthetic Fast Absorbing Gamma Irradiated Undyed Polyglactin 910 Braided Suture With 1/2 Circle Round Body, 110 Cm Size -1-0 .40 Mm , Suture : Synthetic Fast Absorbing Gamma Irradiated Undyed Polyglactin 910 Braided Suture With 1/2 Circle Tapercut, 90Cm Size -2-0.Usfda Approved , T.U.R.P. Cutting Loop : T.U.R.P. Cutting Loop With Single Loop, For Monopolar Cautrypre-Sterile. , Irregation Set: T.U.R.P. Irregation Set , T.U.R.P. Irrigation Set: T.U.R.P. Irrigation Set , Tape: T.V.T.O., Tension Free Vaginal Tape Obturator System , Fixation Device: Tackers For The Laparoscopic Surgery , Terumo Guidewire: Terumo Guidewire 0. 035 X 450 Cm , Tube: Thoracic (Chest Tube ) Drainage With Connector With Trocar( Neonatal) 8 Fr., 10 Fr. With Heimlich Valve , Mesh: Three Dimensional Mesh With Medial Orientation Marker Madeup Monofilament Polypropylene Left Large 10.8Cm X 16 Cm , Mesh: Three Dimensional Mesh With Medial Orientation Marker Madeup Monofilament Polypropylene Right Large 10.8Cm X 16 Cm , Liquid: Tincture Benzoin Co.I.P. , Dressing: Tissue Extracelluar Matrix Dermal Template Containing Structural, Adhesion And Sgnaling Molecule Mainly Collagen I, Collagen Iii, Collagen Iv Elastin, Gags And Growth Factors With 0.3% Silver (Assorted Size) , Mesh : Tissue Separating Multilayer Mesh For Intra-Abdominal Open And Laparoscopicventral Hernia Repair. Soft Polypropylene Mesh Clubbed With Polydiaxanone Layer And Has An Oxidized Regenerated Cellulose On Visceral Side.(Size-15Cmx15cm) , Solution: Topical Heparin Solution 1000 Iu/Ml, 5Ml Bottle , Topical Skin Adhesive: Topical Skin Adhesive, 2 Octyl Cynaoeacrylate With High Viscocity , Dressing: Transparent Adhesive Sterile Skin Dressing For Neonatal Use , Polyurethene Umblical Catheter : Transparent Polyurethene Catheter With Markings 4 To 25 Cm From Distal Tip , Size 4 Fr. , Dressing: Transparent Post Op. Surgical Dressing With Absorbent Pads Size 5 Cm X 7 Cm. , Dressing: Transparent Post Op. Surgical Dressing With Absorbent Pads Size 9 Cm X 25 Cm. , Handle: Transparent Suction Handle (Disposable) With Optional Thumb/ Finger Control With Tube Length 2 To 3 Meter. 26-27 F.G. (French Gauge) Peelable Soft Blister Pack With Crown Tip , Suction Handle: Transparent Suction Handle (Disposable) With Optional Thumb/ Finger Control With Tube Length 2 To 3 Meter. 26-27 F.G. (French Gauge) Peelable Soft Blister Pack With Crown Tip , Handle: Transparent Suction Handle (Disposable) With Optional Thumb/ Finger Control With Tube Length 2 To 3 Meter. 26-27 F.G. (French Gauge) Peelable Soft Blister Pack With Standard Tip. , Biopsy Needle: Trucut Biopsy Needle No. 14 & 16. (Spring Loaded Automatic) , Mesh : Two Point Absorbable Mesh Fixator , Fixation Device: Two-Point Absorbable Fixation Device For Lap Hernia Repair. Trigger Squeeze Mechanical Device With Straight Cannula, Pre-Loaded With 25 Absorbable Straps. , Cord Clamp: Umbilical Cord Clamp With Double Locking And Anti Slip Barrier To Prevent Accidental Reopening And Slipping Of Cord In O Ring. Sterile Packed In Peel Open Blister Pack , Mesh: Umblical Open Dual Mesh Surface Size 8Cm , Drainage Set: Under Water Seal Transparent Drainage System Withpvc Bag 1000 Ml With Clean Marked Initial Water Level , Ureteric Catheter : Ureteric Catheter (Pre-Sterilized) With Polyurethane Ureteral Cathether Size 5&6, Open Ended. , Urine Collection Bag: Uroflowmeter , Vaccum Drainage: Vaccum Drainage-Pvc (Sterilised) With Double Drainage Tube Capacity 800 Ml, Size: 12, 10 , Vaccum Drainage: Vaccum Drainage-Pvc (Sterilised) With Double Drainage Tube Capacity 800 Ml, Size: 14, 16, 18 , Negative Pressure Wound Therapy System : Vaccum Dressing- Super Absorbent, Hydro Gel,Sterile Vaccume Dressing For Collection Of Exudates/Blood From Wound, With Tube. Size- 18Cm X 15Cm , Negative Pressure Wound Therapy System : Vaccum Dressing- Super Absorbent, Hydro Gel,Sterile Vaccume Dressing For Collection Of Exudates/Blood From Wound, With Tube.Size- 18Cm X 18Cm. , Negative Pressure Wound Therapy System : Vaccum Pump- The Manual Vaccum Pump For Negative Pressure Generation To Drain Out Exudate/ Blood From Depth Of Wound . , Vascular Stapler Reload: Vascular Stapler Reload: White Reload Compatible With 35 Mm Standard Articulating Powered Endoscopic Linear Cutter Having Total 4 Rows, 2 Rows Each Side Of The Cut Line. Vascular Stapler: Laparoscopic Powered Vascular Stapler, 35 Mm Standard Articulating Powered Endoscopic Linear Cutter, 320 Mm Shaft Length, 50Degree Articulation Both Sides, 360 Degrees Rotation , Wash Lotion: Wash Lotion: Aqua,Cocamidopropylamine Oxide,Peg7 Glycerine Cocoate, Hydroxyethyl-Cellulose,Lactic Acid, Octenidine Hcl, Allantoin , Wash Mitts: Wash Mitts: Aqua, Glycerine, Cocamidopropylamine Oxide, Sodium Lactate, Allantoin,Octenidine Hcl,Ethylhexyl Glycerine , Dressing: Wash Proof Adhesive Medicated Dressings. Rectangular , Cotton Packs: Zigzag Cotton Packs(Premade Cotton Roll For Use In Plaster)
Contract Date: May 07, 2026 Contract Value : ₹ 8.00 Lakh
Local Bodies No of Bidders 57
Delhi View Result →
15.
Educational and Research Institute #10734365 AOC
Notice Inviting Etender For Procurement Of Equipment, Instruments, Machineries, Tools Charts Etc. Related To Laboratories And Workshop Of Engineering Institute For Junior Executives, Dalalpukur, Howrah-711104-1 Dead Weight Pressure Gauge Tester • Bourdon Tube Pressure Gauge As Manometer • Manometer With Transparent Scale • Manufactured From Corrosion Resistant Materials • Components Arranged On Base Plate. • Set Of Weights • Medium For Transmitting Pressure: Hydraulic • Capacity Of 25Kg / Cm2 • The System Is Nickel Chrome • The Weights Are Zink Iron ) 2 Cut Section Model Of Hermetically Sealed Compressor 3 Universal Bevel Protractor ( Accuracy: 0.01 Mm Material: Stainless Steel Diameter: 70 Mm Size: 300 Mm Type: Analog Graduation 5 Min Straightness .00016+ ( .00005Xl / 2 ) ) 4 Cut Section Model Of Lamont Boiler 5 Slip Gauge Set; Special Set ( M87 ) , Grade I, High Grade Steel, 9 Mm Wide & 30-35 Mm Long Cross Section. 6 Utm Machine ( Material:Ms Voltage:220 V Phase: Single Phase Capacity: 10 To 100 Ton Cross Travel: Up To 1000 Mm Weight: 1500 Kg ) 7 Mollier Chart Flex ( 40 × 30 ) 8 Teak Wood; Wood For Pattern Shop Size: 2×1×6 9 Thermal Conductivity Of Metal Rod; • Frame: Made Of M.S. Square Tubes & Sheets, Welded & Powder Coated • Optional Accessories: Rotameter For Water Flow Measurement • Electric Heater : Clamp Heater, Capacity 200 W, Supply 230 V Ac • Insulation Jacket: Made Of Mild Steel, Mild Steel Rod Is Insulated By Asbestos Powder • Diameter Of Metal Rod 25 Mm, Length Of Rod 300 Mm 10 Cut Section Model Of Screw Type Rotary Air Compressor 11.01 Chart Of Velox Boiler With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.02 Chart Of Mollier Diagram With Labelling ( Size: 23’’ X 36’’, Material: Pvc, With Roller ) 11.03 Chart Of T-T-T Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.04 Chart Of Utm Machine & Sample With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.05 Chart Of Torsion Testing Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.06 Chart Of Iron-Carbon Equilibrium Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.07 Chart Of Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.08 Chart Of Vernier Height Gauge With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.09 Chart Of Thread Measurement With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.10 Chart Of Gear Tooth Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.11 Chart Of Hermetically Sealed Compressor With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.12 Chart Of Domestic Refrigerator With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.13 Chart Of Full Pressure Engine Lubricating System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.14 Chart Of Constant Mesh Gear Box With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.15 Chart Of Synchromesh Gear Box With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.16 Chart Of Components Of A Chasis With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.17 Chart Of Knuckel Joint With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.18 Chart Of Intersection Of A Prism And Cone ( Size:30× 40, Material: Pvc, With Roller ) 11.19 Chart Of Projection Of A Straight Line In Different Quadrants ( Size:30× 40, Material: Pvc, With Roller ) 11.20 Chart Of Plummer Block - Details And Arrangement ( Size:30× 40, Material: Pvc, With Roller ) 11.21 Chart Of Centrifugal Pump With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.22 Chart Of Balanced Type Vane Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.23 Chart Of Bent Axis Piston Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.24 Chart Of Lathe Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.25 Chart Of Single Point Cutting Tool Geometry With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.26 Chart Of Screw Jack Assembly With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.27 Chart Of Cotter Joint Assembly And Design With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.28 Chart Of Vertical Drilling Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.29 Chart Of Shaper Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.30 Chart Of Safety On A Lathe Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.31 Chart Of Safety On A Milling Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.32 Chart Of Safety On A Shaper Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.33 Chart Of Safety In Carpentry Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.34 Chart Of Safety In Fitting Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.35 Chart Of General Precaution In Workshop ( Size:30× 40, Material: Pvc, With Roller ) 11.36 Chart Of Cnc Turning With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.37 Chart Of Elements Of Jigs ( Drill Bushes ) With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.38 Chart Of Tig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.39 Chart Of Mig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.40 Chart Of Engine Cooling System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 12 Digital Lab Trainer ( Bread Board Model ) ( Built-In Dc Regulated Power Supply; At Least 8 Logic Input Switches; At Least8 Output Led; Pulse Generator For Clock Frequency ; Patch Chords ) 13 Arduino Uno Board ( Atmega328 ) 14 Experimental Kit To Study Pam, Pwm And Ppm Modulation And Demodulation ( Pulse Generator With Variable Frequency And Amplitude, Pam Modulator And Demodulator, Pwm Modulator And Demodulator, Ppm Modulator And Demodulator ) 15 Ujt Trainer Kit With P.S. & Patch Cord 16 Led Colour Tv Demonstration Kit ( Display Type: Led, Hd: Screen Size: 24: Connectivity: Usb, Hdmi, Av: Test Points To Be Present Minimum 10 Nos.: Switched Faults To Be Provided: Product Tutorial Should Be Present ) 17 Microwave Oven Demonstration Trainer Kit ( Type: Solo: Capacity: 17 Ltr.: Control Type:Mechanical: All Circuits & Panels To Be Mounted On-Board: Test Points To Be Provided To Analyze Signals: Instruction Manual To Be Provided ) 18 Washing Machine Demonstration Trainer Kit ( Application: Lab Experiment: Semi-Automatic: Tank Capacity: 6.5 Kg: Block Diagram & Circuit Diagram To Be Mounted On The Lid: Test Points To Be Provided ) 19 Mobile Communication Trainer Kit To Study Various Signalling And Fault Insertion Techniques ( Gsm Handset Trainer Kit.  Operate Both On Windows And Linux Platform  Usb Interface For Communication  Best Suitable For Iot Gateway Application  External Connector To Interface With Any Microcontroller  Easy Understanding Of At Commands  Real Time Operation  Built In Network Status Led  Audio Interface Connector  Simple / Easy Operation  External Antenna  Application Module Relay Interface For Ac Device ( Optional ) ) 20 Trainer Kit For Mobilephone Set To Study Transmitter And Receiver Sections In Mobile Handset And Measure Frequency Band Signal ( Real Time Mobile Operation # Full Understanding Of Mobile Phone Working # Frequency Measurement And Band Verification # Provides Study Of All Sections In Mobile Phone # Tx / Rx Frequency Measurement # 3G / 4G Technology And Gmsk Signals # Gsm Data Rate # Detail Study Of User Interface Control Signals # Detail Study Of Sim Operation # Battery Identification And Charging Study  Switched Faults 21 Consumable ( 9V Battery, Cro Probe, Digital Ics ) 22 Cro ( 20 Mhz , Dual Trace, Dual Channel ) 23 Trainer Kit For Mobile Phone ( Features : The Experimental Kit Will Be Capable I ) To Study General Block Diagram Of A Mobile Phone. Ii ) To Study Mobile Transmission Section. Iii ) To Study Mobile Reception Section. Iv ) To Study Different Nos. Of Faults Provided With The Trainer. V ) To Study & Observe Voltages / Waveforms Of Each Test Points. Vi ) To Study Mobile Charging Circuits. Vii ) To Use Mobile Phone As Modem For Using At Commands As Given; A ) Sending Text Messages, Read / Delete Massages Etc. B ) Calling To A No, Reject / Accept The Incoming Calls Etc. C ) Gprs Related Commands. Study Of Bluetooth Technology & Connection With Other Bt Devices. Bluetooth Profiles : Bip, Bpp, Dunp, Ftp, Hid, Opp , Sap, A2dp, Pbap, Spp Etc. To Study General Idea Of Sim Card. ( Local Sim Card Must Be Inserted By The User At The Time Of Experiment ) . ) 24 Salt Bath Furnace For Heat Treatment ( • Resistance Heating ( Element ) • Operating Temp.: Up To 1200°C • Digital Temp. Controller ( Pid ) • Chamber Size : 450Mm X 300 Mm X 300 Mm • Furnace Uniformity + / - 2°C • Temp Recorder With 2 Channel Placed At Opposite Sides • Salt For Use With Two Times Top Up • Spare Heating Element 2Pc ) 25 In-Situ Metallography Kit ( • Items: Portable Grinder / Polisher, Grinding Discs, Lapping Cloths, Diamond Pastes, Aerosol Spray, Replication Film, Paste, Reflector And Gumming Tape For Excellent Contrast Or Transparent Replica - Film Thickness - 125 Microns, 30 Microns, Replica Liquid, Glass Slides ) 26 Automatic Electrolytic Polishing Machine ( • Function: Fully Automatic Electrolytic Polishing And Etching With Automatic Scanning Function • Preparation Time: Within 30 Sec • Electrolyte For Low / High Alloyed Steels & Aluminium • Pump And Magnetic Stirrer • Integrated Cooling System ) 27 Micro-Hardness Tester ( • Test Load : 10, 25, 50, 100, 200, 300, 500, 1000 Gm • Scale: Knoop & Vickers • Dwell Time: 5-90 Seconds Settable • Objectives : 10X, 20X, 40X, 60X • Loading And Unloading : Motorized • Measurement – Automatic And Or With Manual Micrometer Eyepiece. • Traverse: Automatic And Or Manual With Micrometer. • Focusing - Motorized Focusing With Manual Over-Ride • Computerized Imaging Attachment, Dedicated Software To Measure Hardness On Computer With Report Generation Facility • Accessories: Sheet Holder, Wire Holder, Hardness Test Block, Bulb, Indenter. ) 28 Cracked Aluminum Test Block ( For Penetrant Sensitivity Checking In Dpt ) ( Aluminum Test Piece That Measures 3 X 2 X 3 / 8 With A 1 / 8 Wide With A Milled Notch That Separates The Blocks Two Sides To Facilitate Side-By-Side Penetrant Comparison. The Test Block Is Used To Check The Strength Of “In-Use” Penetrants. This Is Done By Processing One Half Of The Block With “Used” Penetrant, And The Other Half With Fresh Penetrant. Can Be Used To Compare Sensitivity Of Different Penetrants Or Sensitivity Of New And Old Penetrants. Complies With Astm E165 And Asme Boiler And Pressure Vessel Code Section V & Iii, And Mil-I-23135-C. ) 29 Pie Gauge / Magnetic Flux Indicator ( To Be Made From Eight Ferrous Segments, Braised Into A Single Piece, Providing A Star Pattern Of Nonferrous Discontinuities. Eight Linear Discontinuities To Provide Indications In All Directions Non-Ferrous Handle With Pivot. Specification Compliance • Mil-Std-271 • Astm E709 ) 30 20Mhz Analog Cro ( Dual Trace ) , Bandwidth:- Dc ~ 20Mhz ( -3Db ) Y Deflection:- 5Mv / Div ~ 10V / Div. Rise Time:- <18Ns，Mag _70Ns ：17.5Ns. Max Input:- 400V ( Dc+Acp-P ) 31 50Mhz Digital Storage Oscilloscope, Bandwidth 50Mhzreal-Time Sampling Rate 500 Msa / S, Equivalent Sampling Rate 50Gsa / S.Memory Depth: 32Kptstrigger Types: Edge, Pulse Width, Video, Slope, Alternativeunique Digital Filter Function And Waveform Recorder Function, Max Input:- 400V ( Dc+Acp-P ) 32 3D Model Showing Different Parts Of A Coal Fired Thermal Power Station 33 3D Model Showing Different Parts Of A Gas Fired Thermal Power Station 34 3D Model Showing Different Parts Of A Diesel Power Station 35 3D Model Showing Different Parts Of A Nuclear Power Station 36 3D Model Showing Different Parts Of A Hydro-Electric Power Station 37 3D Model Of Boiler Showing Its Different Parts Used In Coal Fired Thermal Power Station 38 3D Model Of Boiler Showing Its Different Parts Used In Nuclear Power Station 39 3D Model Of Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant 40.1 Colour Flex Chart Describing Different Parts Of A Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.2 Colour Flex Chart Describing Different Parts Of A Gas Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.3 Colour Flex Chart Describing Different Parts Of A Diesel Power Station Size:30× 40, Material: Pvc, With Roller 40.4 Colour Flex Chart Describing Different Parts Of A Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.5 Colour Flex Chart Describing Different Parts Of A Hydro-Electric Power Station Size:30× 40, Material: Pvc, With Roller 40.6 Colour Flex Chart Describing Different Parts Of Boiler, Used In Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.7 Colour Flex Chart Describing Different Parts Of Boiler, Used In Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.8 Colour Flex Chart Describing Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant Size:30× 40, Material: Pvc, With Roller 41 3-Phase Induction Motor Speed Control Using Pwm Inverter For Interpreting Speed-Torque Characteristics Using Vvvf Drive 42 Ups Trainer Kit ( 1Kva ) Output Voltage : 230 V Ac Nominal, Input Voltage : +12V Dc Battery. Capacity : 1Kva, Output Frequency : 50 Hz Accuracy : + 5%. Switching : Automatic. 43 Smps Trainer Kit Incl. ±5V, ±12V Input Voltage: Ac 100 – 264V 50 / 60Hz Output Voltage: 12V Dc, 0-5A Output Voltage: Adjustment Range: ±20% Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal Ac Input / Full Range 100% Full Load Burn-In Test Cooling By Free Air Convection High Quality And High Performance Led Power Supply With A Metal Body For Hidden Installation For Led Lighting Design With Built-In Emi Filter, Improve Signal Precision. Certifications: Ce & Rohs No Minimum Load. Compact Size Light Weight. High Efficiency, Reliabiltiy & Low Energy Consumption Controller: Satandard 44 Commutation Kit Of Scr ( Class A To F ) Completely Self – Contained Stand – Alone Unit. Demonstrates The Principle And Various Methods Of Forced Commutation Of Scr. 1. Self-Commutation By Resonating Load ( Class “A” Method ) . 2. Self-Commutation By An L C Circuit ( Class “B” Method ) . 3. Complimentary Commutation ( Class “C” Method ) . 4. Auxiliary Commutation ( Class “D” Method ) . 5. External Pulse Commutation ( Class “E” Method ) . * Supply Required 230V, 50Hz Ac. * Built-In Ic Based Dc Regulated Supply And Led Indication For Supply “On”. * Built-In Load Facility In The Form Of Led’S. * Connecting Each Circuit Separately And Verifying Its Principle. * Multicoloured Test Points Are Provided To Observe The Waveform And Voltages. * Set Of Required Number Of Patch Cords. * Housed In An Elegant Cabinet With A Well Spread Intelligently Designed Circuit Layout Engraved On The Front Panel. * Strongly Supported By A Comprehensive Instruction Manual Complete With Theory And Operating Details. 45 Colour Flex Chart Describing Single Line Diagram Of A Given Distribution System ( Lt & Ht ) Size:30× 40, Material: Pvc, With Roller 46 Colour Flex Chart Describing Short Transmission Line ( 220Kv ) Size:30× 40, Material: Pvc, With Roller 47 Colour Flex Chart Describing Medium Transmission Line ( 220Kv ) ( Both T & Π-Model ) Size:30× 40, Material: Pvc, With Roller 48 Power Factor Improvement Kit Using Static Condenser Including Load R-L Load Of At Least 2Kva With Appropriate Capacitor Bank. 49 Setup For Load Test On 1-Ph Induction Motor: Load Test Kit Of 1-Ph Induction Motor ( 1Hp, 230V, 50Hz ) 50 Loading Test Kit Of 3-Phase Alternator: ( 2Kw, 415V, 50Hz ) With 3-Ph R-L Load Box Coupled To A Dc Motor; Capable To Perform As Synchronous Motor Test With Dc Generator Load; Integrated With All Required Measuring Instruments 51 Speed Control Kit Of Stepper Motor Including Reversing Arrangement With 8051 Microcontroller: Stepper Motor Of Appropriate Capacity To Be Served By 8051Μc 52 Speed Control Kit Of Ac Servo Motor: Motor Spec: 3000Rpm, 200W, 0-240V, Control Torque: Standard With All Needed Accessories 53 Speed Control Kit Of Dc Servo Motor: •Voltmeter Vdc 3.5 Digit. 200Mv •Rpm Indicator For Speed Measurement •Voltmeter Vdc 3.5 Digit 20V Power Supply: •Ic Regulation In Controller Circuit Power Supplies •Operated On Mains Power 230V, 50Hz +10% Features: •Position Control Of A 12 Volt, 1 Amp Dc Geared Pm Motor ( 50 / 60 Rpm ) •Calibrated Dials With 1 Degree Resolution For Reference And Output Position •Two 360 Degree Servo-Potentiometers •Built In Step Signal •Built In Waveform Capture / Display Card For Study Dynamic •Electronic Techogenerator For Feedback •Non-Contact Eddy Current Break For Load •Speed Control Of 12V, 4W, Permanent Magnet Dc Motor •Speed Range Up To 3000 Rpm ( Typical 54 Mcb Test Kit For Performing Load Test: Kit Should Be Able To Perform Short-Circuit, Over Load, Thermal Trip Test For Mcb With Rating Upto 30A 55 Dismantled Elcb & Rccb Kit For Demonstration Purpose: Elcb: Single Phase 2 Pole Elcb, Rccb, Isi Marked 32A Mcb With High Voltage, Overload Protection, Current 3 To 30 Ma Rccb: Breaking Capacity 10 Ka, Frequency, 50 Hz, Number Of Poles 2P, Operating Characteristics: Ac Rated Current 40 A, Sensitivity 30 Ma, Standard, Is 12640-1 & Iec 61008-4, Test Button Yes 56 Testing Kit For Percentage Differential Protection Of Transformer Using Transformer Differential Relay ( Electromagnetic / Μp Based / Static ) : Standard For Laboratory Purpose 57 Colour Flex Chart Describing Different Parts Of Acb & Vcb ( 33Kv, 15Mva ) : Size:30× 40, Material: Pvc, With Roller 58 Experiment Kit To Measure Solar Radiation Using Pyranometer On Tilted Surface At Different Angle Inclination: Standard For Laboratory Purpose 59 Colour Flex Chart Describing Different Parts Of Solar Flat Plate Collector & Solar Concentrating Collector & Trough Collector: Size:30× 40, Material: Pvc, With Roller 60 Experiment Kit To Measure Thermal Performance Of Solar Water Heating System: Standard For Laboratory Purpose 61 3D Model Describing Different Parts Of ( I ) Solar Street Lighting System & ( Ii ) 1Kw Small Wind Turbine ( Swt ) : 3D Model For Laboratory Purpose 62 Setup Of 250Wp Solar Pv Plant Including All Accessories: Solar Panel Specifications:Peak Power: 250W; Maximum Power Voltage: 20.2V; Maximum Power Current: 12.38A; Open Circuit Voltage: 23.9V; Short Circuit Current: 13.12A; Power Allowance Range: + / - 3% Hybrid Inverter Specifications: Nominal Battery Voltage: 12V; Continuous Power Output: 1000W / 1000Va; Surge Power: 2000Va Output Voltage: 230V Ac; Output Frequency: 50Hz / 60 Hz; Output Waveform: Pure Sine Wave; Maximum Solar Input Power: 600W; Maximum Open Circuit Solar Input Voltage: 55V; Maximum Solar Charging Current: 50A; Maximum Mains Ac Charging Current: 20A; Maximum Combined Charging Current: 50A; Peak Efficiency: 93% Battery Specifications ( Per Battery ) : Nominal Voltage: 12V; Nominal Capacity: 50Ah ( 10H Rate ) / 55Ah ( 20H Rate ) ; Maximum Charging Current: 25A; Self-Discharging Rate: <3% Per Month; Cycle Lifetime At 30% D.O.D.: 1000-1100 Pressure Control: Safety Valve Installed Terminal Type: F13 ( Bolts And Washers Included ) Operating Temperature: From +10C To +40C 63 Setup Of Small Wind Turbine Plant Including All Accessories: Standard For Laboratory Purpose 64 Study Kit Of Assembling And Dismantling Of Csp Plant Using Parabolic Trough Or Disc: Standard For Laboratory Purpose 65 Study Kit For Assembling Vertical Axis Or Horizontal Axis Swt: Standard For Laboratory Purpose 66 Digital Lcr Multimeter: Digital Lcr Meter ( Battery Operated ) , Model: 4070 Range: 0.1Μh To 20H, 0.1Pf To 2000Μf, 0.1Ohm To 20Mohm Accuracy: 2Mh, Resolution: 1Uh, Accuracy: 20Mh, Resolution: 10Uh, Accuracy: 200Mh, Resolution: 100Uh Accuracy: 2Nf, Resolution: 1Pf, Accuracy: 20Nf, Resolution: 10Pf, Accuracy: 200Nf, Resolution: 100Pf, Accuracy: 2Uf, Resolution: 1Nf, Accuracy: 200, Resolution: ± ( 0.8 Percent+5 ) 0.1, Accuracy: 2K, Resolution: 1, Accuracy: 20K, Resolution: 10, Accuracy: 200K ( Make: Metravi ) 67 Handheld Power Meter Or Power Analyzer With Socket: Voltage: 85V-265V, Current; 0.002A~20A, 50Hz, 1-Ph 68 Analog Power Factor Meter ( 1-Ph & 3-Ph ) : Standard For Laboratory Purpose 69 Multimeter With Clamp Meter Arrangement With Hfe Lcr: Standard For Laboratory Purpose ( Make: Metravi ) 70 Three Phase Power Measurement Kit ( Y & Δ Load R-L Load ) Incl. 3-Ph Wattmeter With 2Kw Range: Standard For Laboratory Purpose 71 Kit For Troubleshooting Single Phase Electronic Energy Meter: 230V, 1-Ph, 50Hz 72 Three Phase Trivector Meter: Salient Features Class 0.5S As Per Relevant Is And Iec Standards 5A Current Rating 3 Phase 4 Wire 4 Quadrant Measurement Anti-Tamper Features Self-Diagnostic Capability Multiple Tariff / Time Of Day Feature Bidirectional Energy Recording Up To 4 Maximum Demand Registers Load Survey ( Interval Data ) Features Up To 12 Reset Backups Optical Port / Rs 232 / Rs 485 / Ir / Irda / Rf ( 2.4 Ghz / 865-867 Mhz ) ( Optional ) ( Make: L&T ) 73 Brake Test Kit Of Dc Series Motor: 220V Dc, 2Hp With Allied Required Accessories 74 Back-To-Back Test Kit Of Single Phase Transformer: 1-Ph, 240V, 50Hz, 1Kva ( 2 Nos. ) Identical Transformers With Other Standard Accessories 75 Isolation Transformer Kit: 230V; 230V / 10Amp 230V; 230V / 5Amp 76 Pulse Transformer Kit: Dc Supply: Two 5V & 12V, Pulse Generator: Two Selectable Frequency & Variable Pulse Width, Mains: 230V / 50Hz, Adequate For Cro Observations, Optocoupler: One, One Ferrite Wired 1:1 77 Colour Flex Chart Describing Different Vector Groups Of Theree Phase Transformer: Size:30× 40, Material: Pvc, With Roller 78 Full-Wave Fully Controlled Bridge Rectifier Kit With & Witout Filter Arrangement: Standard For Laboratory Purpose 79 Kit To Find The Characteristics Of Zener Diode: Standard For Laboratory Purpose 80 Kit To Find The Characteristics Of Mosfet: Standard For Laboratory Purpose 81 Ujt Relaxation Oscillator Trainer Kit: Standard For Laboratory Purpose 82 Singlestatge Transistor Trainer Kit ( Ce-Mode ) : Standard For Laboratory Purpose 83 Trainer Kit For Sr, D, Jk & T – Flip-Flop: Standard For Laboratory Purpose 84 Trainer Kit For Realization Of Encoder And Decoder Circuit: Standard For Laboratory Purpose 85 Trainer Kit For Realization Of Multiplexer And Demultiplexer Circuit: Standard For Laboratory Purpose 86 Trainer Kit For Implementing Dac & Adc: Standard For Laboratory Purpose 87 Connector Cables For Ade Lab. Of Different Types: Standard For Laboratory Purpose 88 Arduino Uno R3 Board With Lcd1602, Servo Motor, Relayes, Processing And C Code, Beginner Starter Kit With Mannual And Allied Accessories: Standard For Laboratory Purpose 89 Trainer Kit For 8051 Μc Programming: Trainer Kit For 8051 Μc Programming With Keypad To Write Program 90 Trainer Kit Using 8051 Μc For Measurement Of Ac Voltage, Current, Frequency & Phase Angle Using Suitable Ct, Pt, Zcd, Adc, Etc. 91 Demonstration Kit For Identifying Pvc, Xlpe, Vir, Catenary, Frls, Frlsh Cables / Wires Of Different Current Rattings: Standard For Laboratory Purpose 92 Megger: Insulation Tester ( 500V ) With Hand-Driven Gen.: 500V, 2500 Mega Ohms 93 Megger: Insulation Tester ( 2500V ) With Hand-Driven Gen. 2.5Kv, 2500 Mega Ohms 94 3-Ph Smart Energy Meter For Lt Power Measurement, 3-Ph, 415V, 4-Wire, Kwh Meter, Current: 10-60A, Class 1.0 Accuracy As Per Relevant Is And Iec Standards, With Lcd Display [ Make: L&T ] 95 Trainer Kit For Dc Chopper Drive With Resistive Load & Dc Separately Excited Motor. 1 / 8 Hp, 200Vdc Operation, Current Limit Protection, Speed Control Using Frequency And Duty Cycle Variation, Jones Chopper Based Control, Motor Loading Arrangement Can Be Provided / Resistive Load May Be Connected, Other Variety Of Controllers With Converter Control With Closed Loop Controller 96 Trainer Kit For Controlling The Speed Of Separately Excited Dc Motor By Changing The Firing Angle Of Scr Using 1-Ph Full Converter. Power Supplies: • Power Supply +15Vat 150Ma • Isolated Supply 0-220V At 5A. • Operated On Mains Power 230V, 50Hz +10% Digital Meters: • Voltmeter 2000V Ac • Voltmeter 2000V Dc • Ammeter 2A Dc Components Are Mounted On The Panels Are: • Scr Tyn604 ( 2 Nos. ) • Diode 1N5408 ( 2Nos. ) • Diode Ba159 • Ac Phase Control By Gate Control Firing Circuit. • Snubber Circuit. Load: • 1 / 2Hp Dc Shunt Motor. • Inductor As Load 230V, 1A • Lamp Load 230V, 60W 97 Μcontroller Based 3-Ph Syn. Motor Drive: Trainer Kit For Controlling The Speed Of Synchronous Motor ( 1Kva ) Drive Using Μc. 98 Demonstartion Kit Showing Different Types Of Power Semiconductor Devices With Heat Shink E.G. Scr, Igbt, Gto, Mosfet, Standard For Laboratory Purpose. 99 Kit For Magnetic Control Of Im: Control And Power Circuit For ( I ) Forward And Reverse Rotation Of Squirrel Cage Im Using Contactor, ( Ii ) Automatic Star-Delta Starter Of Squirrel Cage Im, ( Iii ) Dynamic Braking Of Squirrel Cage Im, Standard For Laboratory Purpose. 100 Screw Driver Set, Standard For Laboratory Purpose. 101 6” Slide Range, Standard For Laboratory Purpose. 102 Wire Stripper, Standard For Laboratory Purpose. 103 Crimping Tool ( 1 Sq. Mm. To 6 Sq. Mm. ) . 104 2.5 Sq. Mm. Stranded Pvc Copper Wire 105 1.5 Sq. Mm. Stranded Pvc Copper Wire 106 1 Sq. Mm. Stranded Pvc Copper Wire 107 Soldering Kit: 20W With Solder Material 108 Contact Type Tachometer ( Range: 0-10, 000 Rpm ) 109 Set-Up With Different Type Tl Lamps ( Conventional & Led ) With Fittings Containing Electrimagnetic Ballast / Electronic Ballast Etc.: Tl Fittings With: 1. Electronic & Electromagnetic Ballast For ( I ) Single 40W, 240V, 50Hz Tl, ( Ii ) 2X40w, 240V, 50Hz Tl, 2. 20W Led Tl With Fittings Incl. 110 3-Ph Capacitor Bank Of 2-4Kva For Correcting Power Factor Of 415V, 50Hz, 1500 Rpm, 2Hp, 3-Ph Squirrel Cage Im With Facility To Connect The Stator Of The 3-Ph Im Both In Star & Delta Mode And A Tri-Vector Meter Having Facility To Measure Kw, Kva, Kwh, Kvarh, Pf. 111 Transformer Oil Breakdown Strength Kit: Breakdown Strength Kit With 5 Ltr. Fresh Transformer Oil, Standard For Laboratory Purpose. 112 Chart For Demonstration Of Different Fire Extinguishers: Colour Flex Chart Describing Different Types Of Fire Extinguishers ( 4 X 3 ) , Material: Pvc, With Roller 113 Chart For Demonstration Of Artificial Respiration ( Cpr ) And Prepare A Report.: Colour Flex Chart Describing Different Types Of Artificial Respiration ( Cpr ) ( 4 X 3 ) , Material: Pvc, With Roller.
Contract Date: Dec 10, 2024 Contract Value : ₹ 11.21 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
West Bengal View Result →
17.
Housing Urban and Rular Development #10644498 Price Bid
Tender For Operation & Maintenance For 4 Nos Of Reverse Osmosis Water Treatment Plant In 1 ) . Flower Market, 2 ) Fruit Market, 3 ) Vegetable Market 4 ) Food Grain Market, Kwmc, Koyambedu, Chennai – 600 107 For A Period Of One Year; Operation And Maintenance Of 4 Nos Of Water Treatment Plant ( Reverse Osmosis Plant ) In Flower Market – 1 No, Fruit Market – 1 No, Vegetable Market – 1 No & Food Grain Market – 1 No For A Capacity Of 2.0 Cum / Hr ( 32.0 Cum / Day ) Product Water. Operation With 2 Nos Of Operator ( One Person In Each Shift ) And 1No. Of Plumber ( In General Shift ) Per Day For Treating Brackish / Any Kind Water ( Using 1 No Of Bore Well ) With Tds Value Up To 2000 Ppm And To Be Brought Down To As Per The Drinking Water Standards ( Bis Standards ) . Which Includes Require Labour Charges, Procurement And Utilisation Of Materials / Consumable Such As Sodium Hypo Chloride, Coagulation, Hcl, Antiscalent, Smbs, Ph Booster Chemicals, Cleaning Chemicals Acidic And Cleaning Chemicals Base, Etc As Per O & M Manual, Servicing / Repairing Of 1 No. 2Hp Submersible Bore Well Pump, 1No. 2 Hp Raw Water Pump, 6 Nos Chemical Dosing Pump , 1 No. 10 Hp High Pressure Pump And 1 No. Centrifuge Air Blower, 1No. 2 Hp Flushing & Cleaning Pump, Supply Of Cartridge Filter For Normal Use & Cleaning 20” Big Blue Model 4 Nos. Per Month And Testing Charges Of Both Raw Water & Product Water. Servicing / Repairing Of Flow Meters, Pressure Gauges, Valves Including Multi-Port Valve And Control Panels, Etc. Cleaning Of Membrane Once In A Month. Attending To Leakage In Pipe Lines And Including Removal Of Blockages Etc, In Pipe Lines. ( The Rate Is Excluding Of Gst & Lwf )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
Tamil Nadu View Result →
18.
Health and Family Welfare #10612599 Price Bid
Notice Inviting E Tender For Purchase Of Office Stationeries And Consumables At Baruipur Sdh South 24 Parganas-1.01 Absconded Form 7.5*8.5 Inch Single Side, 100 Leaf Pad, 70 Gsm 1.02 Atteendence Sheets Ledger Paper, 17*13.5 Inch, 75 Gsm 1.03 Autoclave Register Legal Paper, Back-To-Back, 70Gsm, 200 Page, With Numbering, 3 Mm Board Binding 1.04 A4 Paper Copy Power / Jk Red 75 Gsm 1.05 Alpin 50 Gm Container Good Quality 1.06 Admission Register A3, 100 Folio, 70 Gsm, , Back-To-Back, Numbering, 3 Mm Board Binding 1.07 Arch File 13*11 Inch Good Quality 1.08 Alpin Continer 3 Inch Height Good Quality 1.09 Anasthesia Form A3, Fornt Back, 70 Gsm 1.1 Art Register Legal, Fornt Back, 70 Gsm, Numbering, 3 Mm Board Binding 11 Anc Register Legal, Fornt Back, 70 Gsm, Numbering, 3 Mm Board Binding 12 Asha Register A4, Back-To-Back, 70 Gsm, Numbering, 3 Mm Board Binding 13 Bond Paper Jk Bond, 100 Gsm 14 Bht Adult Legal, Fornt Back, 70 Gsm, Pad Binding, 100 Sheet In A Pad 15 Bht Baby A4, Front Only, 70 Gsm, Pad Binding, 100 Sheet In A Pad 16 Blood Requisition Form Legal, 70 Gsm, Bi Colour, Fornt Back, Pad Binding, 100 Sheet In A Pad 17 Board Pin 50 Gm Box, Good Quality 18 Breush For Clean Gala 19 Battery Big 1050, Good Quality, Eveready, Red 20 Battery Medium Good Quality, Eveready, Red 21 Battery Pencil Aa, Eveready, Red 22 Battery Pencil Aaa, Eveready, Red 23 Brown Paper With Lamination, 17*27 Inch 24 Binder Clip 55 Mm, Good Quality 25 Binder Clip 32 Mm, Good Quality 26 Blood Bag Label 4.25*2.5 Inch, Colour, Gumming Label Good Quality, 04 Colour 27 Blood Centre Debit Voucher 9*5.5 Inch, 70 Gsm, In Duplicate, Numbering, Bill Binding, Colour Paper, 50*2 28 Blood Centre Vbd Refreshment Payment Voucher A4, Single Side, 70 Gsm, In Duplicate, Numbering, Pad Binding, 50*2 29 Cu T Form Legal, Both Side, 70 Gsm, Pad Binding 30 Cbg Battery Cr2032, 3V, Good Quality, Li Ion Battery 31 Digital Thermometer Battery Lr 41, Good Quality, Li Ion Battery 32 Curtain Fittings Shower Curtain, 10 Ft* 10 Ft, Good Quality 33 Cartridge Refilling / Drum Change 88A / 12A Toner Cartridge Refilling 34 Coconut Oil Paracut Blue, 100 Ml 35 Clip Board Legal Size, Fibre, Plain, Good Quality 36 Ct Scan Voucher 11*7.34 Inch, 70 Gsm, 100 Leaf Pad, Numbering, Perforation. 37 Concent Form A4, Front Print, 70 Gsm, 100 Leaf Pad. 38 Computerised Opd Tickets 80 Gsm, 10*12 Inch, Front Back, 39 Cross Match Issue Book A4, Duplicate, 50*2, 70 Gsm, Colour, Numbering, Book Binding 40 Carbon Paper Kores, 100 Sheets In Box, Legal 41 Calculator Orpat, Ot 400, 12 Digit 42 Cotton Thread 555, 6 Box Roll 43 Cover File Good Quality With Lamination 44 Cello Tape 50 Meter, Good Quality 45 Census Register A3, 100 Folio, 70 Gsm, White Paper, Back-To-Back, Numbering, 3 Mm Board Binding 46 Camp Khat 6*3.5 Ft, Nylon Belt, Good Quality 47 Counceelling General Rgister 43, Front Back, 100 Folio 70 Gsm, Numbering, 3 Mm Board Binding 48 C Section Audit Form A4, 04 Leafs In A Set, First Copy Both Side, Stapled. 49 Digital Clock Ajanta, Olc-302 50 Door Mat Synthetic, Green / Blue / Red 51 Death Certificate A4, Front Back, 100 Leaf, 70 Gsm, Pad Binding 52 Discharge Form 9*5.5 Inch, Single Side, 100 Leaf, 70 Gsm, Pad Binding 53 Diet Register 9*17 Inch, Duplicate, Perforation, 50*2, Book Binding, Numbering, 70 Gsm 54 Duty Roster Khata Legal, 150 Folio, 70 Gsm, 3 Mm Board Binding, Numbering, 55 Dot Pen Agni 4G 56 Detergent Powder Sunlight 500 Gm Pack 57 Dengu Form A4, Single Side, 70 Gsm Pad, 100 Sheets, Pad Binding 58 Debit Voucher 9*5.5Inch, Yellow, One Side, 100 Leaf, Pad Binding 59 Disc Number Aluminium For Mother And Baby 60 Daily Utilization Register Legal, Front And Back, 100 Leaf, 70 Gsm, Numbering, 3 Mm Board Binding 61 Dust Bin 2 In 1 Dry & Wet 32 Ltr Nayasa, 28 Liter, Green And Blue 62 Envelop A4 With Cloth Line, Good Quality 63 Envelop Brown, 11*5 Inch, Good Quality 64 Emergency Ticket 9*5.5 Inch, One Side, 100 Leaf, 70 Gsm, Pad Binding 65 Exercise Book No-8, Rule Khata, Oxford / Merit With Numbering, 256 Pages. 66 Electric Kettle 1.8 Liter, Pigeon 67 Extension Cord Anchor, 4 Point, 6 Amp, Wire Length 1.5 Mtr. 68 Ecg Requisition 8.5*6.5 Inch, Duplicate, White Colour, 70 Gsm, 100*2, Numbering.Pad Binding 69 Executive Gel Pen ( Black & Green ) Link Gel Pen Sl-500 70 Emergency Register Ledger Paper, 200 Page, 70 Gsm, Numbering, 3 Mm Board Binding 71 Emplyoee, I Card 10*5 Cm, Lamination, Lace, Card Holder, Colour Digital Printing 72 Emergency Ot Register Legal, 100 Folio, 70 Gsm, Numbering, 3 Mm Board Binding 73 Forcep Stand Sttel, Height 19 Cm 74 Jhul Jharu Gala 75 Flat File 11*13 Inch 76 Fevicol 22.5 Gm 77 Fevistick 15 Gm 78 Foot Operating Bucket 60 Ltr Good Quality 79 Foot Operating Bucket 13 Ltr Good Quality 80 Fever Format A4, Single Side, 100 Leaf, 70 Gsm, Pad Binding. 81 Flow Chart 24*18 Inch, 80 Gsm, Front-Back. 82 Fumigation Register Legal. Front Back, 70 Gsm, Numbering, 3 Mm Board Binding 83 Highlighter Pen Fabre Castle 84 Herpic 500 Ml 85 Hair Remover Cream Veet Hair Remover, 5O Gm 86 House Keeping Register Legal, Front- Back, 70 Gsm, Book Binding, 12 Folio, Numbering. 87 Height Measurement Chart Steel Tape, Wall Fitted 88 Hp Cartridge Ink Black Ink 89 Gala Good Quality Stick 90 Good Night Oil Gold Flash 91 Good Night Machine With Oil Gold Flash 92 Graph Paper For Blood Refrigarator Round Shape, For Blood Bank Refrigarator 93 Injection Register Legal, 100 Folios, 70 Gsm, Numbering, 3Mm Board Binding. 94 Ink For Stamp Pad 60 Ml, Fabre Castle 95 Ipc Book 9*5.5 Inch, Duplicate, Numbering, Book Binding. 50*2 96 Indent Book A4, Duplicate, 50*2, 70 Gsm, 3 Mm Board Binding, Numbering. 97 Issue Register Legal, Front Back, 70 Gsm, 3 Mm Board Binding, Numbering. 98 Injury Report A4, 3 Copy, Single Side Print, Book Binding. 70 Gsm 99 Induction Oven Bajaj 100 Jssk Form A4, Single Side, 70 Gsm, Pad Binding. 100 Leaf Pad 101 Jssk Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 102 Jems Clip Dayal, Metal, 50 Gm 103 Jhinuk Steel No 4 104 Intake Output Chart Legal, Front Print, 100 Leafs, Pad Binding, 70 Gsm 105 Kmc Register A3, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 106 Knife Paper Cutting Knife 107 Key Board Dell 108 Linin Register Legal, Single Side, All Perforation, 100 Sheets, 70 Gsm, Numbering, 3Mm Board Binding. 109 Lock & Key Palam 7 Lever 110 Lock & Key Godrej 7 Lever 111 Line Listintg Forms A4, Front Only, 70 Gsm, 100 Leafs, Pad Binding 112 Labour Room Window & Table Screen Shower Curtain Water Proof 7 Ft*3Ft 113 Marker Pen Board Marker Fabre Castle 114 Marker Pen Permanent Marker Fabre Castle 115 Marker Pen Cd Marker Fabre Castle 116 Mouse Dell 117 Measuring Mug 1 Liter, Good Quality 118 Measuring Tape Good Quality 119 Mothers Discharge Bag 14*18 Inch Non-Woven Bag With One Side Printing 120 Medicine Slip 5.5*4 Inch Front Print, 100 Leafs, 70 Gsm, Pad Binding 121 Match Box Good Quality 122 Magnifying Glass 100 Mm Diameter 123 Money Receipt For Blood Bank 9*5.5, Duplicate, Book Binding, 70 Gsm, 50*2 124 Mouse Pad Good Quality 125 Monthly Ot Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 126 Eye Ot Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 127 Cold Ot Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 128 Emergency Ot Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 129 Cold Ot Performance Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 130 Monthly Case Record Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 131 Maternal Admission Register A4, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 132 Mirror 40Cm*30 Cm, With Back Lamination Board 133 Notice Boiard 3Ft*2 Ft, Good Quality 134 Ncds Mortality Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 135 Nail Cutter Good Quality 136 Net Bucket With Bucket Separately 10 Liter, Multi Colour, Good Quality 137 Note Sheet Pad Legal Ledger Paper, 80 Gsm, 100 Sheet, Pad Binding 138 Opd Medicine Slip A4, In 6 Setup, 70 Gsm, Book Binding, Perforation, 100 Pages In Book 139 Order Book A4, 70 Gsm, Triplicate, 50*3, 3 Mm Board Binding. Numbering 140 Opd Register Legal, 70 Gsm, Back-To-Back, 300 Page, 3 Mm Board Binding.Numbering. 141 Oxygen Log Book A3, Front Back, 3 Mm Board Binding.Numbering.200 Page 142 Osce Format A4 5 Page Front Back 143 Wooden Pencil Apsara, Platinum, 10 Pc Box 144 Paddle Bin 240 Ltr, With Wheel, Good Quality 145 Plastic Tray 12*18 Inch, Multi Colour, Good Quality 146 Patient Satisfection Foem ( Opd ) A3, Front Back, 75 Gsm, 100 Leaves 147 Patient Satisfection Foem ( Ipd ) A4, 5 Leaves In Set, Single Side, 100 Leaves 148 Pencil Cutter Apsara 149 Plastic Container ( 100 Ml ) Good Quality 150 Plastic Container ( 500 Ml ) Good Quality 151 Plastic Container ( 1000 Ml ) Good Quality 152 Plastic Container ( 1600 Ml ) Good Quality 153 Plastic Channel File A4, Good Quality 154 Pathology Form ( Ipd ) Yellow, A4, 75 Gsm, Front Back, Pad Binding, 100 Leaf In A Pad 155 Pathology Form ( Opd ) White, A4, 75 Gsm, Front Back, Pad Binding, 100 Leaf In A Pad 156 Punching Machine Kangaro, ( 52, 8 Cm ) 157 Plastic Gambla 12 Inch Diameter, Multi Colour, Good Quality 158 Plastic Belcha 8 Inch Diameter, Good Quality 159 Plastic Scissor 260Mm, 2.5 Mm 160 Pp Container 8 Inch Length, 6 Inch Width, White Colour, Good Quality 161 Plastic Box 12 Inch Length Good Quality 162 Plastic Box 09 Inch Length Good Quality 163 Ppiucd Form A4, Single Side, Pad Binding, 100 Leafs, 70 Gsm. 164 Plastic Mug 1250 Ml, Goood Quality 165 Plastic Bucket ( 10 Ltr ) Goood Quality 166 Plastic Bucket ( 20 Ltr ) Goood Quality, With Lead 167 Pen Drive 32 Gb Hp 168 Pen Drive 64 Gb Hp 169 Paper Weight Omega Hexa Paper Weight 170 Punching Ball Good Quality 171 Ppicud Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 172 Patient Admitted Particular Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 173 Plastic Carry Bag For Blood Center 30Cm*25Cm. Single Side Printed. Good Quality. 174 Referral Register A4, Front Back, 100 Folios, 70 Gsm, Numbering, 3Mm Board Binding. 175 Refrigarator Temp Chart A4, One Side, 70 Gsm, 100 Leaf Pad, Pad Binding 176 Erazer Apsara 177 Register Book ( No 8 ) Per No 12 Sheets, Numbering, Legal Board Binding 178 Register Book ( No 10 ) Per No 12 Sheets, Numbering, Legal Board Binding 179 Register Book ( No 12 ) Per No 12 Sheets, Numbering, Legal Board Binding 180 Register Book ( No 16 ) Per No 12 Sheets, Numbering, Legal Board Binding 181 Register Book ( No 20 ) Per No 12 Sheets, Numbering, Legal Board Binding 182 Polymer Stamp Per Line 183 Band Aid Round Jhonson And Jhonson 184 Referral Card 6.5*8.5 Inch, Front Back, 90 Gsm, 100 Sheet In Pad 185 Rntcp Form Legal, Front Back, 70 Gsm, Pad Binding, 100 Leaf Pad 186 Rsk Admission Register Legal, Front Back, 200 Folio, 70 Gsm, 3 Mm Board Binding, Numbering 187 Room Freshner Godrej 240 Ml 188 Ribbon Slik Good Quality 189 Swastha Sathi Form A4, Front Only, 70 Gsm, Pad Binding, 100 Leaf Pad 190 Stock Register Legal, 200 Page, Front Back, 3 Mm Borad Binding, Numbering 191 Mrp Sticker Good Quality 1 Inch Length 192 Wooden Spatula 12 Inch, Good Quality 193 Sputam Examination Form 6*8.5 Inch, Front Back, 100 Leaf Pad, 70 Gsm, Pad Binding 194 Stamp Pad 110*69 M, Fabre Castle 195 Swab / Mop Gala 196 Stapler Pin No-10 Kangaro 197 Stapler Pin No-24*6 Kangaro 198 Shaving Blade Good Quality 199 Steel Bowl 4 Inch Diameter 200 Surfexcel Matic For Washing Machine For Washing Machine 201 Tailor Scissor 10 Inch Length Iron 202 Scrotch Bite 7 Cm*7.5 Cm 203 Stapler 10 Kangaro 204 Stapler 24*6 Kangaro 205 Scale Steel Dayal 12 Inch 206 Sparay Container Good Quality 207 Sli Range 12 Inch Tapadia 208 Top Shhet A4, Front Back, 70 Gsm, Pad Binding, 100 Leaf In Pad 209 Temprature Chart A4, Single Side, 70 Gsm Pad Binding, 100 Leaves. 210 Tissue Roll 125 Mt Length, Good Quality 211 T Brush Gala 212 Table Glass 8 Mm Width 213 Treatment Sheets A4, Single Side, 70 Gsm, Pad Binding, 100 Leaves In Pad. 214 Torch Light Eveready 02 Celll Torch 215 Trash Bin 10 Ltr Steel 216 Treatment Sheet For Hdu 25.5 Inch*12 Inch, 120 Gsm, Front Back, 217 Transfer Out Register Legal, Front Back, 70 Gsm, Numbering, 3Mm Board Binding. 218 Usg Requisition Forms 50*2, 6.5 Inch*8.5 Inch, 70 Gsm, Front Print, Numbering, Book Binding, Green And White Paper 219 Utility Gloves 7, 7.5, 8 Inch Good Quality 220 Vaccine Register A3, Front Back, 70 Gsm, 3 Mm Board Binding, 100 Folio, Numbering 221 Vital Sigh Chat A4, Front Only, 70 Gsm, 100 Leaf Pad, Pad Binding. 222 Whitner Pen Fabre Castle 223 White Paper 17*13.5 Inch, White, 70 Gsm, 224 White Board Duster Gripex 6 Inch 225 Wyper Gala 226 Wax Stick Good Quality 227 X Ray / Usg Requisition Forms 6.5*8.5 Inch, 70 Gsm, 100*2, Book Binding, Colour / White Paper , Numbering 228 French Chalk 229 Gum Boot Good Quality 230 Steel Mug 231 Zipper Bag Large 232 Zipper Bag Medium 233 3 Bucket Trolly With Bucket With Squizer
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
West Bengal View Result →
19.
Drinking Water Supply and Sanitation #10562597 Price Bid
Tender For Water Supply Scheme For Augmentation Of Uwss Kushalgarh District Banswara Including 05 Years Om After 01 Year Of Defect Liability Period Under Amrut 2, Water Supply Scheme for Augmentation of UWSS Kushalgarh, District Banswara including 05 years O&M after 01 year of Defect Liability Period under AMRUT 2.0 Sl. No. Item Description 1 Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item andshall not be paid separately. 2 100 mm 3 150 mm 4 200 mm 5 Providing, lowering, laying and jointing in trenches, standardlengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing,disinfection, commissioning etc. complete as per technicalspecifications and direction of Engineer-in-charge of following classand diameter. (excluding earth work) .Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid separately.Supply may be in coil or straight length in 6 M/12 M. 6 HDPE PE-100PN-6 7 90 mm 8 Fabrication, supply of flanged/ plain ended MS pipe made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete (excluding flanged jointing wherever required) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer.Note : E/w to be measured and paid separately. 9 MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) 10 Providing Household Tap Connection as per technical specification andapproved drawing as per relevant IS code (amended up to date) fromHDPE/uPVC/DI/AC/MS/GI pipe line up to consumer meter/premisesby using PP mechanical Integrated saddle with inbuilt flow controlvalve made out of SS316 designed for 5 LPM discharge at 0.5 barpressure , not exceeding the flow of 7 LPM at 2 bar and acompression elbow, moulded in single piece/ fusion welded(Complete job) including digging out suitable size of pits and trench forlaying service line in all kinds of soil; depositing and refilling of pit &jhiri with watering & ramming /compacting in layers and disposal ofsurplus excavated soil as directed with in a lead of 100 meter ;providing & fixing of all fitting duly approved in accordance withspecification for potable water including GM Full-way Valve (IS:778Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipePE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Threelayered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and aboveground level using PPR-C pipe with standard PPR fittings/ GI pipes inthe premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe linecomplete required for making of service connection complete in allrespect including labour charges . The service line should be laid atleast 45 cm below ground level.Note: Road cut and restoration is not part of this item and paidseparately. 11 For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr. 12 Road cutting for house hold service connection in minimum trench width wherever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CCM-30 grade as per specification and direction of Engineer in charge.. 13 Add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. 14 Supply & Fixing of ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. 15 3 core 16.0 Sq.mm 16 Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade withaluminium conductor Armoured of IS:7098-I/1554-1 approved make in groundas per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thickunder layer of sand, second Class bricks covering, refilling earth, compactionof earth, making necessary connection, testing etc. as required of size. 17 Armoured Cable16.0 Sq. mm 4 core 18 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I.B class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance asrequired. 19 Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B class),Steel tube as per IS:1239 or amended up to date and zinc coating as per IS4736, threaded and double flanged (welded) on both ends and two number25x3mm MS flat welded on both ends between pipe & flange, rubber washer &nut bolts etc. complete in all respect. 20 65 mm dia 21 Construction and commissioning of RCC INTZE type Over Head Service Reservoir of following capacity and staging as per the Scope of work and Technical specifications, consisting of the following main activities: -a) Topographic survey, preparation of site contour plan, conducting SBC testand its approval from departmentbefore construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR.The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil.d) Providing and applying two coats of food grade epoxy paint on the inside surface on the top dome, edge beam and 600 mm height of the vertical wall.e)Conducting successfully hydro test and water tightness test as per I.S. code.f) Providing and applying three coats of anti-carbonation paint on the top surface of the Top Dome.g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc..h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top dome/Slab to bottom dome/Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony having railing all around it and MS ladder with safety cage from balcony to top dome/slab.j) Providing and fixing water level indicator (float type).k) Providing and fixing of hand railing all around the balcony, top dome and staircase consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.o) Lighting arrestor consisting of providing and fixing of 2 Nos.of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm.p) CI/DI puddle collar shall be fixed in the bottom dome/ slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately. 22 Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 18 M 23 400 KL 24 Construction of RCC (Flat slab type) Clear Water Reservoir of following capacity as per the Scope of work and Technical specification, consisting of the following main activities: -a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase. c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soll fill.d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall.e) Successful hydro test and water tightness test as per 1.S. code.f) Providing and applying three coats of anti-carbonation paint on the roof Slab. g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.h) Providing and fixing SS-304 ventilator, 55 304 manhole frame and cover and 55 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).i) Providing and fixing MS ladder from ground to top slab.j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide. k) Providing and fixing of 150mm wide water bar for the construction joints in the container.l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately. 25 Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE-2,3 & 4 26 150 KL 27 Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required suchas duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope ofwork. 28 For OHSR 29 100 mm 30 200 mm 31 Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required suchas duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope ofwork. 32 For OHSR 33 200 mm 34 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipeline including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth includingconsolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soil 35 In All Typeof Soil 36 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming ofbottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth includingconsolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required . 37 Ordinary rock 38 Hard rock(blasting prohibited) 39 Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CCcutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. 40 Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 50 metres as directed by Engineer. 41 Bituminous courses 42 Granular courses 43 Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting,guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. 44 Providingand laying in position cementconcrete in specified gradeover prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line andchamberwork.MeasurementforCCworktobemade asperstandard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified,complete work as per technical specification and scope of work. 45 M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 46 Providing, installation, testing and commissioning of Centrifugal Monoblockpump set conforming to IS 9079 , 2 pole motor operating at synchronisedspeed of 3000 RPM with requisite MOC impeller, priming funnel, cock,suitable flanges at suction and delivery side. Pump shall have common shaftfor pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall besuitable for working at various discharge and head requirements as perscope of work. Pump shall be erected on C.C. foundation / cross channels /RSJ frame block with suitable foundation bolts grouted in C.C. foundationblock etc. complete in all respect as per specification, scope of work anddirection of Engineer in Charge of following power rating, suitable forprescribed duty conditions mentioned in TD. 47 Centrifugal Monoblock Pump set (Single Stage) 48 11.0 KW (15 HP) 49 Providing, installation, testing and commissioning of submersible Monoblock pump set conforming to IS 8034 and 2 pole motor operating atsynchronised speed of speed 3000 RPM, with water proof winding. Pumpshall be suitable for various delivery head and discharge with stainless steelshaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and withwater lubricated bearing to accept entire hydraulic thrust. Supply, with cableguard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. Thepump set shall be suitable for direct coupling, with suitable suction strainer.Pump should have suitable discharge out let as per manufacturers design.Antithrust stream lined non return valve shall be provided with the pumpand minimum 6 m submersible copper conductor cable in single / doublerun and 2 pairs of suitable size erection clamp 10 mm thick shall be providedwith each pump etc. complete in all respect as per specification, scope ofwork and direction of Engineer in Charge of following posion : Less than 1.6mm Variation in thickness: Less than 3.2 mm) 50 submersibleMonoblock Pump set (Single Stage) 51 15.0 KW (20.0 HP) 52 Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesstraight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside,Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steelInsertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 53 Manually Operated CI Sluice valve of Class PN-1.0 54 100 mm HW 55 200 mm HW 56 Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amendedup to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float GuideHBT1.HP Orifice- HTB2/ SS,Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS 6418,Fastners - CS, Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material,labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work. 57 Class PN 1.0 58 40 mm 59 50 mm 60 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanisedrubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367(Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitablesupport structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 61 Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 62 100 mm 63 150 mm 64 200 mm 65 Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specificationscompleteofthefollowingsizesincludingall jointing material,costofalllabour,testingandcommissioning Technical Specifications and as per direction of Engineer. Class PN 1.0 66 100 mm dia. 67 150 mm dia. 68 200 mm dia. 69 SITCSTAR DELTA Starter type LT Panel of followingrating:all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated withangleframeincludingotherancillaries(Insulators, AcrylicSheet , Backlight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Neutral Links , Spiral , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminium Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge. 70 STAR DELTA STARTER 11.0 KW (15.0 HP)- :For 2 motors (1 W+ 1S)I/C -MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) andO/G-MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3 Duty(2),2NO+2NCAux.Block(2),ThermalOverloadRelay(9-13A)(2),Control MCB6ASP10KACCurve(2),SinglePhasePreventer(2),Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2) 71 STARDELTASTARTER 15.0KW (20.0HP) : For2motors(1W+ 1S)I/C- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter96*96mm(0-500V)(1),VoltSelectorSwitch(1),Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 100/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue-1)(1),ControlMCB6ASP10KACCurve(3) andO/G-MCCB 63A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (12-18A )(2), Control MCB 6A SP 10 KA C Curve (2),SinglePhasePreventer(2),IndicatingLights(Red-1,Green-1,Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/DTimer(2) 72 Construction of boundary wall of Brick/ stone masonry as per enclosed GAdrawing, scope of work and technical specifications complete work in allrespect. Brief details of boundary wall parameter is as below:1. Depth of foundation- 900 mm.2. PCC in M-10, width -900 mm and thickness 100 mm,3. Stone masonry in CM: 1:6 section of foundation above PCC, 600mm (W )x 450 mm (D) and 450 mm (W) x 450 mm (D)4. Superstructure work: Stone masonry in CM: 1:6, W-300, height-1650mm,/ Brick work in CM: 1:6 W-230 mm, height- 1650 mm.5. Cement mortar pointing on Stone masonry and cement mortar plaster20 mm thick on brick masonry in CM 1:6.6. Expansion joint shall be on every 30 mtr.7. On top of wall there shall be CC Coping 75 mm thick (1:2:4) shall beprovided.8. Pillar for main gate 350x350 mm in size is part of boundary wall.9. Cement paint of approved colour in 3 coat shall be done. 73 Providing and fixing steel, gate, grating and grills made of angles, tees,square bars, flats or black pipe with hold fast and fitting complete as perdesign and drawing including cutting welding and fabrication with primingcoat of red oxide and two coat of enamel paints. 74 Construction of Pump house of RCC framed structure with pump pit in RCCwalls as per scope of work and technical specification complete work in allrespect including electrical works for indoor and outdoor lighting and fans,rain water drainage, sanitary, plumbing, monorail/ EOT crane etc. completeas per direction of Engineer-in-charge. The GA, structure, electrical,sanitary, P&ID, SLD to be prepared by the contractor and submitted todepartment for approval for earth quake zone II. 75 Pump House with Monorail arrangement 76 ConstructionofRCCSluicevalvechamberfordifferenttypeofvalves includingearthworkexcavation,100mmPCCM15 aslevellingcourse, RCC M25 grade for base slab, side wall & cover slab , including cost of steelreinforcement,formwork,Pre-castslabs,plasticencapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as perspecifications and standard drawings and as per direction of Engineer-in-Charge. 77 For Class-A loading 78 Sluice valve chamber of size1.13m x0.85m x1.27mfor pipe size-upto100mm 79 Sluice valve chamber of size1.17m x0.95m x1.415mfor pipe size-from 125-to-150mm 80 Sluice valve chamber of size1.26m x1.185m x1.82mfor pipe size-from 200-to-300mm 81 Construction of RCC Air valve chamber for different type of valvesincluding earthwork excavation, 100mm PCC M15 as levelling course,RCC M25 grade for base slab, side wall & cover slab , including cost ofsteel reinforcement , form work, Pre-cast slabs, Plastic encapsulatedCI/MS Foot Rest, MS flats for the support of pre-cast, proper curing ofconcrete work complete in all respect as per specifications andstandard drawings and as per direction of Engineer-in-Charge. 82 Air valve chamber of size0.9m x1m x1.695mfor air valve size-from 50 mm-to-80mm 83 SITC of Bulk Flow Meter with removable mechanism class B confirming to ISO:4064:2005/ IS: 2373of approved make of following dia sized pipelines andspecificationscomplete: Media:Water(Clear),Temp.50deg.,Pr. rating:PN16,Protectiontype:IP-68, BodyMaterial:IS-210Gr.FG-200, AccuracyClass:ClassB(±2%@Nominalflowrate),MagneticDrive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In- Charge.Note: Rates are exclusive of tail piece / dismantling joints and earth work. 84 BFM 200 mm 85 Design, construction, commissioning & testing of Non Mechanical RapidGravity Filter Plant of capacity as under. This work includes constructionof RCC receiving chamber, baffle channel, flocculate, clarifier, collectingchannel, filter beds , operation gallery, clear water chamber, channel,chlorination chamber, Back wash tank, pipe system for carrying rawwater from Pump House to inlet of RGF, clear water from Plant to CWR,De-sludging system including providing pipe system from clarifier ,flocculate & back wash water chamber to existing storage tank, overhead back wash tank, back wash pumps (1W+1S) set with piping system,air blowers (1W+1S) as per design, interconnection of raw water, clearwater, sludge pipes etc. including allied works such for construction,commissioning of system as defined in scope of work, technicalspecifications and provisions of CPHEEO manual at various water supplyschemes 86 Up to 40 KLH capacity 87 Providing, laying, spreading and compacting of granular sub-base by providing close graded Material, mixing in a mechanical mix plant atOMC, carriage of mixed Material to work site, spreading in uniformlayers with motor grader on prepared surface and compacting withvibratory power roller to achieve the desired density, complete asper MoRT&H specification clause - 401 including all material, labour,machinery, lighting, guarding and maintenance of diversion.Grading - I Material 88 Providing, laying, spreading (with paver finisher only) andcompacting wet mix macadam (WMM) base course comprising ofgraded stone aggregate and granular material conforming toMORT&H specifications (Table 400-II) in layers of equal compactedthickness each consolidated, including pre-mixing the material withwater at OMC in mechanical mixer (Pug Mill), carriage of mixedmaterial by tippers to site, laying in uniform layers in base course ona well prepared sub-base/ base course and compacting with powervibratory-roller to achieve the desired density complete as perMoRT&H specification clause - 406 including all material, labour,machinery, lighting, guarding and maintenance of diversion. 89 Providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per IS : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen Container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 90 Extra for additional bitumen emulsion used in above item for every 1 kg per 10 sqm 91 Providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per Table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including Cost of anti-stripping compound Minimum 1% in Lime/Cement as per design wherever required), including loading of material with F.E. loader, hot mixing of stone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of tack coat/ seal coat. 92 With Bitumen VG-grade 30 93 Providing laying and consolidation Semi Dense Bituminous Concrete, as per Design Mix (approved by Engineer), on prepared surface with specified graded crushed aggregates as per table 500-15 for wearing coarse including loading of material with F.E. loader, hot mixing of stone aggregate, filler and bitumen (including Cost of anti-stripping compound Minimum 1% in Lime/Cement as per design wherever required) heating and mixing in in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 KN pneumatic tyred roller with TP = 0.7 Mpa, to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 508 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. 94 25-30 mm compacted thickness (Grade-2) using Bitumen VG-grade 30 @ 5% (percent by weight of total mix) 95 Bored cast-in-situ R.C.C. pile with cutting / Drilling for anchoring of pile into rocks wherever firm rocky strata is available, shall be done upto desired depth (minimum 1.50 m) as per drawings, specifications and as directed by Engineer. Bore hole shall be cleaned properly before concreting. No, distinction shall be made for penetration through hard rock or rock socketing with design mix concrete (M-35) using batching plant, transit mixer and concrete pump excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. as per clause 1100, 1600 & 1700 of MoRT&H Specification including all material, labour and machinery. 96 450mm dia pile 97 Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum 98 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 99 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 100 M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 101 Supporting block of size 2m, 1.2m 102 For height 10m 103 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix 104 Providing M-30 grade concrete by usingcement as per codal provision instead ofM-20 grade design mix. 105 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 106 Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 107 Columns, pillars, posts and struts etc. 108 Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 109 Cost for Basic Service Charges, Administration and Management, Running of Operation, Maintenance and Repairs including Preventive Maintenance, Cost of material required for maintenance & repairs, Cost of Lubricants, Consumables, Spare Parts (if the spare parts supplied to PHED are used in emergency)as per Scope of Work & terms & conditions of contract for 05 year after defect laibility period of one year DLP (except power feeder, IEC & miscllenous provision) for Water Supply Project 110 1st year 111 2nd year 112 3rd year 113 4th year 114 5th year
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
20.
Metro Rail #10545528 Price Bid
tender for Maintenance Contract Of Civil Works Addition Alteration modification Repair Maintenance Of Various Stations Rss Buildings Between Mansarovar To Badi Chaupar And Any Other Metro Railway Premises Of Jaipur Metro Rail Corporation At Jaipur As Per Bid Documents - Maintenance Contract Of Civil Works : Addition, Alteration/Modification, Repair & Maintenance Of Various Stations & RSS Buildings Between Mansarovar To Badi Chaupar And any Other Metro Railway Premises Of Jaipur Metro Rail Corporation At Jaipur Sl. No. Item Description 1 6mm Toughened Glass in existing frame: Providing and Fixing 6mm thick clear float toughened glass in aluminium door, window, ventilator, shutters and partitions etc. with PVC/ Neoprene gasket etc complete as per architectural drawings and the directions of Engineer-In-Charge. 2 Providing and fixing in position Toughned glass of 12mm thickness all complete including minor cutouts/openings as per the direction of Engineer-in-charge. 3 Providing & Fixing of Floor Spring, Patch (Hydraulic) (OZONE MAKE) for Glass Door Assembly/Unit complete as per Directions of Engineer-In-Charge. 4 Providing and fixing tactiles 12mm thick yellow directional vitrified porcelain Granite tactiles (Australian made) laid on floor with laticrete 111 crete filler powder mixed with laticrete 73 latex admix and applied to a minimum thickness of 4.5 mm. The mixing ratio shall be as follows : 20 Kg Bag (Laticrete111):5.5 Ltr (Laticrete 73) spacer of 3 mm shall be used between the tiles and joints filled using laticrete Latapoxy SP-100 epoxy grout in Inca gold colour. The joint depth shall be 6 mm. Laticrete product shall be procured by Laticrete India Pvt Ltd/Laticrete International Inc (Tiles for blind people - directional tiles as installed in JMRC station) 5 Repair of defective rolling shutter with using any material required for bend repair,tightening of spring,bolt & screw and welding by welder as a complete job as per direction of Engineer In charge.(Upto 12 Sqm in area)(This item includes cost of necessary scaffolding,all lead & lift and consumable i.e welding electrodes of required specifications as per site requirements) 6 Extra For Reparing of Rolling Shutter having size more than 12 sqm in area 7 Skilled labour for sewerage chamber/pipe line cleaning/clearing choking with all T&P including all required machinery. 8 ROCA meridian-N soft close seat cover white 9 Providing ofaccess raised floor of light grade (15 KN/m2) UDL panels manufactured from pressed formed corrosion resistant galvanised steel with total overwrap of one piece top, sides and bottom flange encapsulating high performance chip board case stiched and with a panel to cater in the size 600*600*31mm with new panels of same specifications complete in all respects. the acess floor should be able to take a point load of 2.5 KN over 25 mm sq. and UDL of 15 KN/sqm. The panel shall be finished with high abrasion , anti-static HPL of formica colour Y606 having fire rating as per BS 476 clause 5, 6 & 7. 10 Supplying and fixing rolling shutters of approved make, made of 80 x 0.8mm color coated G.I Laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets of M.S, side guides of G.I and arrangements for inside and outside locking with push and pull operation complete including cost of sring hooks, providing and fixing necessary 45.0 cm. long wire springs grade No-02 including dismantling of existing rolling shutter as per the directions of Engineer-In-Charge. 11 Colour Coated G.I Top Cover 0.5mm thick for rolling shutters as per instructions of Engineer-In-Charge. 12 Providing and fixingpink dholpur sand stone work of size as specified below, of approved colour/patternat all levels for wall lining/Columns (veneer work) by mechanical arrangement with S.S.Cramp/ brackets,.Anchor bolts,5mm vertical S.S. of approved make. Inserts as per drawings and specifications. The cost for making necessary grooves in the stone to accommodate the vertical inserts, grooves all-around stone pieces, making 10mm deep rebate for tile inlay, chamfering of corner edges and polishing are included. 13 pink dholpur sand stonesize (1600-1800)x600x25mm minimum thick 14 Providing and laying 30mm thick FLAMED Sadarhalli Grey Granite Stone flooring in treads and landings (including bull nosing, rounding the nose and making groove) of stepsof approved colour, size and pattern, (sample of granite stone shall be approved by Engineer-in-charge) over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with neat cement slurry mixed with pigment to match the shade of granite stone complete as per specifications andas per direction of engineer-in-charge. 15 Extra for Red/ Raw Silk/ Tan Brown/ Jet Black granite Stone 16 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. 17 Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge. 18 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make. 19 Providing and applying crystalline mortar by mixing in the ratio of 4.5: 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ?45 MPa and adhesive bond strength Class R3 ?1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. 20 Strengthening of existing open cell metal false ceiling by clipping assembled cell ceiling panels into extra U-profile carriers (as per requirement) in Galvanized Mild steel, pre-coated in black enamelled finish. In addition to the carriers, extra C-profile wire clips shall be fixed to hold the cell ceiling panels into the carriers for strengthening. Further, for lateral strengthening,extra angles made out of Galvanized Mild steel shall be fixed for cross connection with U-profile carriers. Payment shall be made on the basis of unit plan area measured. This item includes all material, labour, night charges, scaffolding, transportation, taxes etc. 21 Providing and fixing 12 mm thick partition/doors assembly of solid acrylic material with stainless steel hardware complete in toilets. 22 Providing and fixing backlit or high quality flex prints of high resolutionimages and to be pasted or installed on the walls or any other surfaces,of approved size and design as directed by the Architect. Necessaryframework in wood or aluminium to be provided for mounting of flex panel asrequired or as directed by the Architect. Flex panel to be installed takingutmost care to avoid any damages or stains on walls etc. In case of theinstallation or printing is found unsatisfactory the sheet to be replaced withnew with necessary corrections as part of rectification works. Item to includeall necessary tools, Flex and printing, framework for mounting of flex panelscaffolding if required etc. complete 23 Providing and fixing Small Size MDF Bases for mounting Sculptures of required sizes and design as directed by the Architect. Base to be made using 19mm MDF sheets including necessary wooden framework if required and finished with Duco paint of approved shade and type as directed by the Architect. Item to include all necessary tools, hardware etc complete in all respects. 24 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 25 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 26 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 27 Providing and fixing 8mm thick Black Painted Toughened Glass Clading on walls of required size and design as directed by the Architect. 8mm thick Marine Plywood backing to be provided behind the glass, to be fixed over 25mm x 25mm teak wood framework fixed to wall @ 1.2M c/c or as required as per site conditions. Item to include providing necessary lipping to hold glass in place, tools, hardware etc. to complete item in all respects. 28 Manufacturing, supplying and Fixing retroreflective overhead signage boards made up of 2mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retroreflective sheeting confirming to type III of ASTM-D-4956-01 as approved by Engineer-In-Charge, letters, borders etc. as per IRC:67-2001 in silver white with blue color background and with high intensity grade, pasted on substraight by pressure sensitive adhesive backing which shall be activated by applying pressure confirming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts and nuts @ 300mm centre to centre all along the periphery as well as in 02 vertical rows along with theft resistantmeasures, including the cost of painting with two OR more coats of epoxy paint in grey color on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specifications and directions of the Engineer-In-Charge. (Structural Frame work Including M.S Plate to be provided seperately. Rectangular area of the sheet only shall be measured for payment). 29 ILLUMINATED SIGNS:Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per relvant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-In-Charge. 30 SIGN FRAME:-The sign frame shall be made out of aluminium extruded sections fabricated to required sizes and shape. Item to include providing and fixing of aluminium channel spot welded to sign frame including channel supports are to be powder coated to match as per apptoved colour or in colour duly approved by Engineer-In-Charge. The inside edge of sign frame to have EPDM gasket where it gets in contact with the sign panel as per approved design is required.All powder coating shall be done on all internal as well as external surafaces. The Sign shall be internally lit with the specified luminare (LED MODULE) and item to include providing and fixing luminare and fixtures comple as per the technical specifications for electrical works. 31 SIGN PANEL:- For elevated and underground stations.Providing and fixing sign pannel made out of 04mm thick polycarboate sheeting with vinyl message (3630/7725 series 03M OR equivalent) to required sixe and shape. Vinyl colour to match graphics and text as per schedule and pasted on sign panel. All the confont in the signage will be plotter cut/screen printing. The signage will be laminated for the protection of plotter cut vinyl pasted on sign panel. For double side 32 REFLECTOR PANEL:- Item to include providing and fixing embosed aluminium mirror reflector panel as per approved specifications and make, with provision to hold luminaries in position. 33 BACK PANEL:- For elevated and underground stations.For single sided signs, where graphics/text is to be on 01 side. Item to include providing in embosed radiant mirror reflector, back panel to be pure polyster coated to match as per approved colour as per technical specifications.ACCESSORIES:- Providing and fixing all accessories such as magnetic catchers, hinges, spring clips, anchoring hooks, nuts, cleats, screw hooks and slots etc complete as per specified fabrication drawing. All anchor fastener, bolts etc to be SS-304 Grade.Above description holds good for the following signage unless otherwise specified except for modifications due to their respective finished dimensions and fixing arrangement OR unless otherwise specified. 34 ILLUMINATED FACE MOUNTED SIGN:- (At Height of Roof at Entry/Exit and at room height of Underground Metro Stations Badi Chaupar and Chhoti Chaupar)The sign frame is to be mounted on BRICK/RCC wall backing with cladded or Non cladded.Item to include aluminium sign frame of required size and shape including mounting the sign frame on the RCC/BRICK wall backing by drilling holes of required diameter in the RCC/Brick Wall and achoring the sign frame using HILTI FASTENERS or Equivalent or specified size and length and providing and fixing all item and accesaories including silicon sealant and backer rod of approved make complete as per drawing for following panel sizes. The mounting surfacesshall be required and finished as per surrounding area complete at no extra cost. This sign is to be necessarily signle sided only. All achor fasteners, bolts etc to be SS-304 Grade. (SIZE: 2400mmX900mm Approx. OR 5200mmX1000mm Approx. Depth of SIGN DEPTH: 75mm OR as approved by EIC) 35 Supply and Installation of Vinyl Sheet (03M) in UV Print on existing signages at metro stations of Jaipur Metro. 36 Providing and fixing 120 minutes steel fire rated doors as per detailed specifiction made by shakti mate, Godrej etc. Along with hinge and door closer as per nfpa 80 and as per NFPA 252, temperture increase on the unexposed surface not exceeding on average 361.c (650.F) during first 30 mins of test size as per directions of Engineer in charge. 37 Re-alignment of misaligned doors by taking out the door and the door frame (as per site requiement), rectifying and re-fixing of the same. The door shall be made good using any fixtures required (except hinges, door closer, trim paces, panic bars) and nithing shall be paid extra in line of the same. The work shall be carried out as per the direction of Engineeer in charge. 38 Removing of old paint, rust with help of power tool and preparing the surface to various standards (ASA 3.0) before application of primer. The rate will include all tools, plants, labour and other consumables and incidental charges. Nothing shall be paid extra. Except NBSR no.1, 3,4,5 and 6. The surface which are not accessible with the help of power tool shall be prepared with wire brush. 39 Applying surface tolerant epoxy coating in two coats with epoxy based primer with minimum DFT of 200 microns at all locations wherever required and volume of solids not less than 75%. Paint is to be applied with spray painting, in place where its inaccessible it may be applied with brush (item to be used where surface is having scaling.) 40 Application of finishing coat epoxy polyurethane system of approved quality brand ot UV resistant coat at all locations and colour to achieve smooth & even surface with minimum volume of solids 57% and of 75 microns thickness of surfaces. 41 Providing and fixing of Anti Birds Spikesmade of high quality of Poly Carbonate, 5 Row 304 mm. Rates are inclusive of screws, cable ties, adhesives, fasteners up to 5 meter Height complete as per direction of Engineer-in-Charge. 42 Supply 5-7.5 HP submersible pump of discharge capacity 50-60 kl/hrs including cost of operation etc complete. 43 Cladding Work 44 Granite cladding work : Providing and laying 30 mm thick mirror polished Sadarhalli Grey/Cheema Pink/Jhalore Beige granite stone work of up to and including sizes of 1200mmX600mm of approved colour/ pattern with 4mm groove all around at all levels for wall linings/ columns/ cladding/skirtings (veneer work) by mechanical arrangement with SS cramps/ brackets, anchor bolts, 6 mm vertical SS pins of approved make and inserts as per drawings and specifications. The cost of making necessary grooves all around stone pieces, chamfering of corner edges and polishing are included. 45 Extra for Red/ Raw Silk/ Tan Brown/ Jet Black granite 46 Removal of old expansion joint, repair of site and providing & fixing of BITUFLEX close cell form twice for overlaping of close cell form joints filling of POLYDEEN GROUTFAST or equivalent non curing mortar and applying POYDEE liquid membrane or equivalent on the entire area of expansion joint mfg by M/S Greensboro Polychem Pvt. Ltd Or equivalent and fixing of 6 mm thick and 150 mm wide aluminium sheet one with sliding screw complete as per direction of Engineer- In-Charge 47 Polishing and buffing of SS 304 railing/SS surface provided in metro stations with minor grinding(as required) and removing stains/blemish with proper rubbing and polishing. The surface with suitable material and finally buffing the surface with high speed buffing machine using buffing material complete as per dierection of Engineer In Charge. The work will be carried out in non revanue hours and rates are inclusive of all taxes man power material, tools and plants, CO and OH etc all complete. 48 Providing skilled manpower such as welder/fitter for welding works along with welding machine to carry out welding as per direction of Engineer-In-charge including cost of tools, safety equipments,consumable(electrodes) etc. 49 Providing semiskilled manpower such as Plumber/carpentor/mason/ for plumbing/sewerage/carpentory/masonary, rectification works with all required T&P complete as per direction of Engineer-In-charge. 50 Providing unskilled manpower such as helper/beldar etc for miscelleneous Civil works with all required T&P as per direction of Engineer-In-charge. 51 Supply of potable water through water tankers o capacity 5000 liters at stations of JMRC from MSOR-BICP
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
21.
Housing Urban and Rular Development #10528961 Price Bid
Repair Maintenance Of E And M Services At Gpo Building Vikas Bhawan-Ii , Delhi-110054 . ( Sh - Day To Day Maintenance Of Ei And Running And Electrical Sub-Station , Dg Set , Fire Fighting , Fire Alarm , Water Supply And Lift ) , ( Vikas Bhawan-Ii ) ( Maintenance Of E . I . And Fans ) Maintenance And Up Keeping Of All The Internal Electrical Installations , Epbax & Lan Net Work System And Compound Lights Of Vikas Bhawan-Ii , Delhi Round The Clock I / C Recording And Monitoring Of The Complaints On All The Days Of Week I / C Sundays & Holidays As Per General Terms And Conditions Attached - 1 Job , ( Operation Of Dg Set & Sub Station ) Round The Clock Operation & Maintenance Of Substation Equipment ( 2X2000kva Dry Type Transformer ) H . T . L . T Panel Capacitor Panel ( 2X375 / 400 Kvar ) Acb / Mccb Bus Ducting And All Other Switch Gear Etc I / C Operation Of D . G . Set ( 1X1500kva & 1X 320Kva ) With Amf Panel Installed At Vikas Bhawan-Ii , Routine Periodical Checking & Testing As Per General Terms And Conditions Attached -1 Job , ( Operation Of Fire Fighting And Water Supply Pumps ) Running , Maintenance And Operation Of Water Supply Pumps Installed At Vikas Bhawan-Ii , Round The Clock On All The Days Of Week I / C Sundays & Holidays As Per General Terms And Conditions Attached- 1 Job , ( Operation Of Fire Alarm System ) Operation And Routine Maintenance Of The Alarm System Installed In Vikas Bhawan-Ii , Delhi Having Microprocessor Fire Control Panels , Various Type Of Addressable Detectors And Pa System And Talk Back System Round The Clock I / C Sundays And Holidays As Per General Terms And Conditions ( Annexure-I ) , Additional Terms And Conditions Attached- 1 Job , Maintenance Of Effluent Treatment / Softening Plant Operation And Routine Maintenance Of The Effluent Treatment Plant Capacity 100M3 / Day Including Multi Grade Filter And Softening Plant Of Capacity Up To 10000 Ltrs . Per Hr . Round The Clock Complete With The Cost Of Consumable Material Such As Water Hardness Testing Kit & Suitable Required Salt Servicing , Checking Of Water Quality & Making Required Adjustment In Plants To Achieve Required Quality Of Water & Repair / Replacement Of Minor Defective Parts Like Pvc , Gland , Pump & Motors Round The Clock I / C Sunday And Holiday As Per General Terms And Conditions Attached- ( 1 Job ) , Operation Of Lift Operation And Maintenance Of Lifts Operation Of Following Lifts Installed In The Vikas Bhawan-Ii , Delhi Building In All Seven Days Of Week I / C Sunday An Holidays Etc . As Per ( General Terms And Conditions Attached . I ) 7 Nos . 20 Passenger / 1360 Kg . Lifts - 1 Job
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 9
Delhi View Result →
22.
Housing Urban and Rular Development #10528899 Price Bid
Annual Comprehensive Maintenance And Operation Of 40 Kld Sewage Treatment Plant Installed At New Building Of Police Station Badarpur , New Delhi , Comprehensive Maintenance Of Sewerage Treatment Plant ( Stp ) Of 40 Kld Capacity Based On Sbr Technology I / C Servicing Of Blower Belt And Cleaning With Chemicals , Cleaning And Distilling Of Sludge Drying And Refilling Media , Periodical Back Washing Of The Filters With Required Solution And Fixing Of Acm And Dmf Media I / C Disposal Of Existing Media And Refilling The Fresh Media , Replacement / Repair Of Various Electrical Items Like Indicating Lamps , Meters , Wires / Cables , Mccb , Motor Pump Set , Servicing Of Pump I / C Rewinding Of Motors Etc , Checking Leakage From Gland Packing Of Pumps And Replacing The Same , Checking And Lubricating All Bearings And Replacing The Defective Bearings , Checking Of All Pipes , Valves , Joints , Strainers , Handles Etc And Repair All As Per Requirement I / C Repairing , Servicing & Replacement Of Defective / Wornout Electrical , Electromechanical , Mechanical Parts And Equipments And Associated Accessories Of Stp Plant As Per Inventory And Term & Condition Attached Including Providing All Type Of Consumables Items Required For The Stp System In Functional And Keeping The Machinery In Good Working Condition , I / C Testing And Commissioning Of All Minor Leakages And Defects Etc As Reqd . As Per Engineer-In-Charge . , Routine Maintenance & Operation Of Sewerage Treatment Plant ( Stp ) Of 40 Kld Capacity Based On Sbr Technology In Two Shifts Daily , Cleaning Floors , Taking Out The Sludge And Proper Cleaning Of Stp I / C Watch & Ward Of Stp By Providing Following Staff In All Days Including Sunday And Holidays:- : I ) Operator ( Semi-Skilled ) For Stp -02 Nos . - ( One No . In Each Shift I . E 6 . 00Am To 2 . 00 Pm & 2 . 00Pm To 10 . 00Pm ) , Supply & Dropping Of Liquid Microbial Inoculants For The Removal Of Foul Odour From The Stp And To Maintain Proper Mlss In The Areation Tank Etc . Complete As Reqd . , Supply And Dropping Of Liquid Hypo Solutions-30 L Per Month , Urea And Dap -30 Kg Each And Jaggery 50 Kg Per Months As Required For The Dosing In Aeration Tank For Necessary Nutrient And Culture Growth And To Maintain Proper Mlss In The Areation Tank Etc . Complete As Reqd . , Submission Of Two Monthly Test Reports Of Untreated Sewage And Treated Water From Dpcc / Nabl Authorized Lab With Following Parameters . A ) Cod B ) Bod C ) Tss D ) Oil & Grease E ) Ph
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 9
Delhi View Result →
West Bengal View Result →
24.
Housing Urban and Rular Development #10427022 Price Bid
Construction Of Sump Well Pump Room And Sitc Of Rotary Lobe Pump Sets Along With Related Eandm Equipments At Rahim Khan Road Nizamuddin East New Delhi Under Ser-1 Civil And Electrical Work-SH-I Pump Set WorkSupplying, installation, testing and commissioning of Positive displacement Rotary Lobe Pump for draining/dewatering of storm water/sewer water compatiblefor VFD (variable frequency drive) having minimum discharge 500 m3 /hr at 68Hz and 170 m3/hr at 25 Hz for 10 mtr. head and 5 mtr. suction Lift capacity complete withGeared Motorwith minimum power 45 kW/60 HP, 4 Pole suitable for operation on 415 Volt 50 Hzas per additional specification etc. as required. 2 Supplying, fabrication & installation of45KW VFD AUTO CONTROL PANEL made out of CRCA sheet steel of thickness 2mm for load bearing members, 1.6mm for non load bearing section with necessary stiffeners as required. 3 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required: 4 250 m.m dia 5 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required: 6 250 m.m dia 7 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 8 40 mm dia 9 80 mm dia 10 250 mm dia (wall thickness 6.3 mm) 11 450 mm dia (wall thickness 7.0 mm) 12 Fabrication, Supplying, Installation Testing & commissioning of automatic motorised Mechanical Coarse Bar Screen Suitable for channel dimension:i) Channel width: 1000mmii) Channel Depth: 3500 mmiii) Water Depth: 1500 mmiv) Bar Spacing: 20 mmv) Bar size : 12X6X50 mm vi) Angle: 75 Degreevii) MOC: SS304 Peak Flow/ Screen: 27MLDi/c Supplying, Installation, Testing & commissioning of 1No relay based control panel made out of 2mm thick CRCA sheet for 2Nos. Mechanical Coarse Bar Screen & 1No.Belt Conveyor etc. complete as required. - 13 Supplying, Installation, Testing & commissioning of Differential Level Sensorcomprises of Two Ultrasonic Level Sensors and One Differential Transmitter for Mechanical coarse bar screenetc. complete as required. 14 Supplying, Installation Testing & commissioning ofBelt Conveyor of size 600 mm width and2000mm Length i/c accessories for screen etc. complete as required. 15 Supplying, Installation Testing & commissioning of Gate Assy FG A101 Cast Iron Side Wall Embedded Oen Channel Gate (101) Size: 1000(W) X 1000 (H) mm Suitable for 1.75 m Seating water head (From invert Level) , Flush Bottom Closure Arrangement , Manually operated, Close Top Frame Gate etc. complete as required. 16 Supplying, Installation Testing & commissioning of Ultrasonic Level Transmitter with 4 ANSI PP Flange etc. complete as required. 17 Supplying, Installation Testing & commissioning of Local Control Stations for Pump Motors having following accessories i/c making connections etc. complete as required:a)DP MCB, 10kA, C-Curve for Control, 6A;: 1 No.b)Ampere meter, SIF-96, CI-1, Aux Supply 230V AC; 4-20mA I/P;1 No.c)Indicating Light-RED for ON;1 No.d)Indicating Light-AMBER for TRIP;1 No.e)Push Button with 1 NO contact - GREEN for VFD START;1 No.f)Push Button with 1 NC contact - RED for VFD STOP;1 No.g)Push Button with 1 NC contact - Mushroom head RED;1 No.h)Thermistor Relay 252 PMTG;1 No.i)Control Terminals, 2.5 sqmm; 6A;22 Nos. 18 SH-II Diesel Generator SetSupply, installation, testing and commissioning of Silent Type, CPCB IV + emission compliants Diesel Generating set having Prime Power Rating of 200 KVA, at 1500 RPM, 0.8 lagging power factor at 415V suitable for 50 Hz, 3 Phase system & for 0.85 Load Factor with all necessary equipments and accessories and consisting of followings :(a)Diesel EngineDiesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 degree C, 50 % RH & at 1000 meterMSL and conforming to BS 5514, BS 649, IS 10000(amended upto date), capable of taking 10 % overloading for 1 hourafter12hourofcontinuousoperation.Theenginewillbefittedcompletewithall accessories as per specifications .(b)Enginemountedinstrumentpanelfittedwithandhavingdigitaldisplayforthe following :-(i) Start stop switch with Key (ii) Water temperature indication (iii) lubrication oiltemperatureindication(iv)lubricationoilpressureindication(v) Batterycharging indication (vi) RPM indication (vii) Over speed indication (viii)Low lube oil trip indication(ix) Engine hour indication. 19 (c)AlternatorSynchronous alternator rated at 200 KVA, 415V, at 1500 RPM, 3 Phase, 50Hz, AC Supply with 0.8 lagging power factor at 40 Degree C, 50% Relative Humidity & at 1000m above MSL. The alternator shallbehavingSPDPenclosure,brushless,continuousduty,self-excitedandself-regulatedthrough AVR, confirming to IS: 4722 /BS : 2613suitable for tropical conditions and withF/H insulation.(d) Base Frame &foundation: Both the Engine & alternator shall be mounted on suitable baseframemadeofMSchannelwithnecessaryreinforcementwhichshallbeinstalledon suitablecementconcretefoundationandvibrationisolationarrangementasper recommendations of manufacturer.(e) Fuel Tank : Daily service fuel tank ofminimum 385 Ltr capacity fabricated out of 3mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank & diesel engine with MS class C Pipe of suitable dia complete with valves, level indicators, and accessories as required as per specification.(f) Exhaust System : Dry exhaust manifold withsuitable exhaust residential gradesilencer . 20 (g) Starting system : 24V DC starting system comprising of starter motors, voltage regulator and arrangementforinitialexcitation,completewith suitableno. of batteries(25Plates,180 AmpsHour Capacitylead acid type) as required as per specification.(h) Acoustic Enclosure : Acoustic and weather proof enclosure with arrangement for fresh airintakeforcoolingoftheengineandalternator,extractiondischargeofhotairinto atmosphere as per specifications. 21 AMF Panel(i) Fabricating,Installation, Testing & Commissioningofautomaticmainsfailurecontrolincludingautobypasspanel,suitable for 200 KVAsilenttypeDGsetcompletewithrelays,timers,setofCTs,formeteringand protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH& Provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to Diesel Engine and elsewhere, if required, all complete and interlocking including the following :-(a) 3 nos. 400 A 36KA, 4 Pole with thermo-magnetic release double break MCCBwith O/L,S/C & E/Fprotection with Aux . And trip contact and shunt release.(b)Auto / manual /test/off selector switch.(c) 2 nos. over voltage relay, 2 nos. reverse power relay and 2 nos. under voltage relay.(d)1 no. Auto mains failure relay(e) 3 sets of current transformer15P 10 accuracy for protection andclass 1, 15VA class-Ifor metering and. AMF Relay.(f) Energy analyzer unit to indicate current, voltage, frequency power factor and KWH.(g) Indicating lamps for load on mains and load on set.(h) Fuse for instruments.(i) Battery charger, complete with all accessoriesand Ammeter,voltmeter etc. 22 (j) Supply failure& restoration timer(k) Main supply failure monitor(l) Control unit with three impulse automatic engine start/stop and failure to start lock out.(m) Impulse counter with locking and reset facility.(n) ON/OFF/Control circuit switch with indicator.(o)Aux. contactor 2NO+2NC(p) Audio/Video annunciation for :(i) High water temperature.(ii) Low lubricating oil pressure.(iii) Engine over speed(iv) Engine fails to start.(v) Full load/ Maximum load warning. 23 Main LT PanelSupplying, installation, testing & commissioning of LT panel of minimum front area 3.15 sq. mtr. and depth not less than 45 cm, made out ofCRCA Sheet Steel 2mm for section with necessary stiffeners as required. Free standing, self supported, floor mounting, single front, indoorinstallation, non draw out and compartmented. ISMC-100 fabricated channel frame with undrilled holes.Bottom with undrilled detachable 3mm gland plate as per order .Welding will be carried out with no external deposition of welded material in particular places and there will not be any gap between the welded materials.Siemens Grey RAL 7032CRCA Structures shall be pre-treated in seven tank chemical process, heated in baking oven.Minimum 60 micron of approved shade (RAL-7032).230V AC for Main LT Panel and Other Panels415+/- 5% , 50Hz+/-5%, 3 Phase 4 Wire 50KA – 1 Sec TPN Aluminum Electrolytic Grade ( E-91E) busbar shall be provided as per suitable sze, duly supported on SMC/DMC, busbar supports & insulated with color coded heat shrinkable sleeve. Power wiring will be through Vertical Bus -Bar and 1.1 KV grade PVC multistrand copper flexible cable . All control wiring will be done by 1.5 sq mm copper flexible PVC multi strand wire. CT wiring shall be carried out with 2.5 sq mm copper flexible PVC multistrand wire.1. All R,Y,B,N phases will be Red, Yellow , Blue & Black 2.All control wiring will be Grey colour. Earthing shall 24 be be with Green color wire.3.C.T. - Wiring through Red, Yellow, Blue, Black coloured wiring with shorting link type terminals.EPDM gasket provided at all joints, doors & covers to make panels dust & vermin proof (IP-52)Section-I(a) INCOMER :-1No. 4nos. 400 A 36KA, 4 Pole with thermo-magnetic release double break MCCBwith O/L,S/C & E/Fprotection with Aux . And trip contact and shunt release. Ics=100%Icu i/c extended rotary handle and spreaders and all required accessaries Digital 96 mm square flush pattern type Voltmeter (0-500 V) with selector switch & back up HRC fuses/MCBs … complete 1 set.Digital 96 mm square flush pattern type Ammeter (0-400 Amp)with selector switch and one set of 3 Nos. CTs of ratio 400/5A class 1 accuracy and 10 VA burden - 1 set.Indicating lamp On, OFF, TRIP /R/Y/B/Ready to close…complete 1set(b) 400 AOnload Change over SwitchIcs=100%Icu i/c extended rotary handle and spreaders and all required accessories- 1setIndicating lamp On, OFF, TRIP /R/Y/B/Ready to close complete 1set(c) OUT GOINGS:- 4Nos. 100A FP MCCB ( 25kA) with thermo-magnetic release i/cextended rotary handle & spreaders. Ics=100%Icu etc complete as reqd. 25 Digital 96 mm square flush pattern type Voltmeter (0-500 V) with selector switch etc complete 1 set.Digital 96 mm square flush pattern type Ammeter (0-400 Amp)with selector switch and one set of 3 Nos. CTs of ratio 400/5A class 1 accuracy and 10 VA burden - 1 set.Indicating lamp On, OFF, TRIP /R/Y/B/Ready to close…complete 1set3 Nos. 63A FP MCCB ( 25kA) with thermo-magnetic release i/cextended rotary handle & spreaders. Ics=100%Icu etcwith indicating Lamps complete as reqd. 26 SH-III EI Work Supplying & Laying of one number PVC sheathed XLPE insulated power cable of 1.1 KV grade of following size on cable tray as required. 27 3.5 x 240 Sq.mm XLPE Al Conductor Armoured Cable (clamped with 40x3mm MS flat clamp) 28 3 X 50 sq mm (clamped with 25x3mm MS flat clamp) 29 Supplying, Laying and fixing of XLPE insulated and PVC sheathed aluminium conductor armoured Power Cableof 1.1 KV grade of following sizes on wall surface etc. as required. 30 4X25 Sq. mm. (clamped with 1mm thick saddle) 31 Supplying & Laying and fixing of one number PVC sheathed XLPE insulated power cable of 1.1 KV grade of following sizedirect in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 32 3.5 x 240 Sq.mm XLPE Al Conductor Armoured Cable 33 Supplying and Laying of XLPE insulated and PVC sheathed Copper conductor armoured Power Cable of 1.1 KV grade of following size on cable tray as required. 34 4x4 Sq.mm. 35 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 36 3½ X 240 sq. mm (62mm) 37 3 X 50 sq. mm (32mm) 38 4 X 25 sq. mm (28mm) 39 Supplying and drawing following size of PVC insulated copper conductor multicore cable of following size on cable tray as required. 40 10 core 1.5 sq.mm 41 24 core 0.5 sq.mm 42 4 core 0.5 sq.mm 43 2 core 1.5 sq.mm 44 6 core 0.5 sq.mm 45 3 core 0.75 sq.mm 46 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 47 100 mm width X 50 mm depth X 1.6 mm thickness 48 450 mm width X 50 mm depth X 2.0 mm thickness 49 EarthingEarthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 50 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 51 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode includingconnectionwithbrassnut,bolt,spring,washerexcavationandre-fillingetc.as required. 52 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 53 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode includingconnectionwithG.I.nut,bolt,spring,washerexcavationandre-fillingetc.as required. 54 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. asrequired. 55 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 56 Group C 57 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 58 3 x 4 sq. mm 59 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 60 25 mm 61 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 62 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 63 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 64 4 way (4 + 12), Double door 65 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 66 Single pole 67 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 68 63 amps 69 Supplying, Installation, testing & commissioning of weather proof LED Corrosion resistant battentype LED fitting of following wattagewith IP65 body made out of polycarbonate housing & opal diffuser with better thermal managementCCT-5700°KLumen Efficacy ≥110 Lm/W Power Factor≥ 0.95, CRI≥70, with constant current driver etc. complete as reqd. 70 36 Watt (4 feet ) 71 SITC of 450 mm heavy duty Exhaust Fan 1400 RPMsingle phase 240 Volt 50 Hz in the existing opening, complete with heavy duty louver/ shutter i/c making the hole to suit the size of the above fan, making good the damages, connection, testing, commissioning & earthing etc. as required 72 SITC of 600mmwall mounted fan having 3 nos. of blades, 1440RPM etc complete as reqd. 73 SH-IV AMCAMC for pump sets, Motor control panel and other accessories starting after satisfactory completion defect liability period from date of completion and commissioning of the pumping system.Annual Comprehensive maintenance for all 3 Nos. Pump sets, Motor, VFD Auto control panel, Mechanical Course Bar Screen, Differential Level sensor, Ultra Sonic Level Transmeter, Belt conveyor, Gate assembly including all accessories and consumables etc. all complete and as per site requirement as per Engineer-in-charge. 74 For 1st Year (Free Maintenance period) 75 For 2nd Year 76 For 3rd Year 77 Comprehensive maintenance of 200 KVA Silent type DG Set with AMF Panel. Annual Comprehensive maintenance of 200 KVA DG set and its accessories with AMF Panel i/c repairing, servicing, cleaning, checking and Descaling with replacment of following consumable parts i.e oil filter, fuel filter, air filters, coolant, lube oil, coolant filter, battery water, V Belts and batteries etc. complete and as per site requirement as per Engineer-in-charge. 78 For 1st Year (Free Maintenance period) 79 For 2nd Year 80 For 3rd Year 81 Civil WorkDemolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 82 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 83 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. 84 All kind of soil. 85 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 86 Providing and laying in position ready mixed or site batched design mix cement concrete for plai plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads: but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 87 Concrete of M10 grade with minimum cement content of 220 kg /cum 88 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 89 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 90 Suspended floors, roofs, landings, balconies and access platform 91 Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick 92 Edges of slabs and breaks in floors and wallsAbove 20 cm wide 93 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work;usingcoarse aggregate and fine aggregate derived from natural sources,Portland Pozzolana / Ordinary Portland /Portland Slagcement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability andworkabilitywithout impairing strength; including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge;for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M25 grade withminimum cement content of 330 kg /cum 94 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 95 Thermo-Mechanically Treated bars of grade Fe-500D or more. 96 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 97 Cement mortar 1:4 (1 cement : 4 coarse sand) 98 12mm cement plaster of mix 1:4 (1cement:4 fine sand). 99 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 100 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 101 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 102 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre 103 Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :Ordinary roack 104 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 105 Providing and fixing soil, waste and vent pipes : 100 mm dia. : 106 Sand cast iron S&S pipe as per IS: 1729. 107 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 108 Circular shape 450 mm dia 109 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 110 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 111 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 112 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 113 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm : 114 Sand cast iron S&S as per IS - 1729 115 Providing and fixing plain bend of required degree : 100 mm 116 Sand cast iron S&S as per IS - 1729 117 Providing and fixing single equal plain junction of required degree: 100x100x100mm, 118 Sand cast iron S&S as per IS-1729. 119 Providing and fixing terminal guard: 100mm : 120 Sand cast iron S&S as per IS:1729. 121 Providing and fixing collar:100mm : 122 Sand cast iron S&S as per IS:1729. 123 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 124 100mm : 125 Providing and fixing trap of self cleanising design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100mm inlet and 100mm outlet : 126 Sand cast iron S&S as per IS:3989. 127 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 128 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc : Externalwork : 129 25mm dia nominal bore. 130 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tees including cutting andthreading the pipe etc. complete : 131 25 to 40mm nominal bore. 132 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc : Externalwork : 133 32mm dia nominal bore. 134 Providing and fixing C.P. brass bib cock of approved quality confirming to IS :8931 : 135 15mm nominal bore. 136 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confirming to IS:8931 : 137 15mm nominal bore. 138 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 139 25mm nominal bore. 140 Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats : 141 25mm nominal bore. 142 Providing and fixing brass ferrule C.I. mouth cover including boring and taping the main : 143 25mm nominal bore. 144 Providing and fixing unplasticised PVC connection pipe with brass unions : 45cm length : 145 15mm nominal bore. 146 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 147 Providing and fixing PTMT grating of approved quality and colour : Circular type : 148 100mm nominal dia. 149 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer : E.R.W. tubes. 150 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 151 Size of tile600x600mm. 152 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.Single socketed pipes : 153 110mm diameter. 154 Providing and fixing on wall face unplasticised –PVC moulded fittings / accessories for unplsticised rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion : Bend 87. 5° : 155 110mm bend. 156 Providing and fixing on wall face unplasticised –PVC moulded fittings / accessories for unplsticised rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion : Shoe (Plain) : 157 110mm Shoe. 158 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 159 Two or more coats on new work. 160 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : 161 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 162 Providing and laying in position ready mixedor site batched design mix cement concrete for plain cement concrete work;usingcoarse aggregateandfine aggregate derived from natural sources and usingrecycled concrete aggregate (RCA)as coarse aggregate and fine aggregate within thepermissible utilization,PortlandPozzolana / Ordinary Portland/Portland Slag cement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concreteto improvedurability andworkabilitywithout impairing strength;including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering and finishingas per direction of the engineer-in-charge; for thefollowing grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level 163 Concrete of M25 grade with minimum cement content of 300 kg /cum.(Note: The permissible utilization of Recycled Concrete Aggregate (RCA) as coarse aggregate and fine aggregate is 25% each). 164 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: 165 With 20x20 mm square bar 166 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 167 450 mm dia Ductile Iron Class K-9 pipes. *For use of bigger dia. pipes other than 450mm, net difference in basic rate as per applicable DSR shall be reimbursed to the contractor. 168 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) including applying of twice ( at base and top of mortar ) cement slurry @ 2.2kg/m2 (each time) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. 169 (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.Using rough kota stone. 170 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : 171 Using rough Kota stone 172 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 173 Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : 174 Red sand stone slab40 to 50 mm thick 175 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces 176 40 to 50 mm thick 177 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 178 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 179 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 180 Made of G.I. wire of dia 4 mm 181 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 182 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) 183 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 184 Modified estimated cost after using correction factor on DSR-2023 on account of GST @0.973 vide O.M. dated 08.08.2024.(i.e. 9720555 *0.973 = 9458100 185 Carrying out structural analysis and design of all civil work, Design of all E&M works, foundation and superstructure of work such as pump-room, UGT and Delivery line upto Barapullah Drainage etc. all complete and submission of input data, check print structural drawing, 6 Nos. prints with soft copy of analysis and drawings as per direction of Engineer-in-Charge by approved structural consultant agency. The profile of structural consultant shall be got approved from NIT approving authority. The structural design shall be comprehensive to enable easy servicing of pumps and other heavy equipment’s etc. possible. The Hydrological data shall be provided to the consultant for drainage design.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Delhi View Result →
25.
Drinking Water Supply and Sanitation #10386603 Price Bid
tender for 23 Nos Major Untapped Drains And Others Small Drains Joining River Ganga And Yamuna Having Approximate Discahrge Of 70 Mld Situated In Municipal Corporation Prayagraj During Maha Kumbh Mela Area 23 Nos Major Untapped Drains And Others Small Drains Joining River Ganga And Yamuna Having Approximate Discahrge Of 70 Mld Situated In Municipal Corporation Prayagraj During Maha Kumbh Mela Area, Survey, Design, Supply and Installation of flow measuring devices on Drains for Discharge Measurement and Supply of all Material , Skilled and Unskilled Labours / Workers , Tools & Plants required for In-Situ Treatment of Sewage flowing in 23 Nos Major Untapped Drains and Others small drains joining River Ganga and Yamuna having Approximate Discharge of 70 MLD Situated in Municipal Corporation Prayagraj during Maha Kumbh MeIa Area by using any Proven Open Technology including real time water quality analysis of effluent and influent by installation of online real time output parameter sensor and share the data across SCADA Platform (Showing the value of TSS, BOD, COD) and Flow in District-Prayagraj”. Sl. No. Item Description 1 Survey, Design,and Supply of all Material , Skilled and Unskilled Labours / Workers , Tools & Plants, consumables etc for successful execution of following works:- 2 (A) In-situ Treatment of sewage drainsusing any Proven Open Technology including Topographical survey, Flow measurement by installation of Flow measuring devices and V-Notch and water quality analysis of drains, , package wise networking/Interlinkingof drains for collective Treatment of drains , Designing of the complete treatment system, Procurement, installation, testing and commissioning of the complete plant to meet the treated water as per following output parameters, 3 I. pH- 6.5-8.5, 4 II. BOD <= 30 mg/L, 5 III. COD <= 100 mg/L, 6 IV. TSS <= 50 mg/L, 7 V. Fecal Coliform < = 230 MPN/100 mL, 8 VI. DO > = 5 mg/L 9 along with Intense oxidation/ozonation system to ensure removal of bad odour, fecal coliform and other pathogens ,increase DO and reduce BOD and COD, Installation of online real time output parameter sensors and share the data across SCADA/OCEMS platform (showing the value of TSS, BOD, COD,Feacal Coliform ,Dissolved Oxygen and Flow) to make it available to employer authorities in real time with all civil, electro mechanical, Electric Connection and energy cost (from the grid or diesel generator sets to ensure 24x7 operation of the plants to meet the project objectives) during the entire project period, Removal of all collected sludge and its disposal to the selected site upto 15 km distance, Operation and maintenance of the complete system and Removal of all infrastructure within one month after Completion of the project period. Note:-1- Any Other small drains. having very less discharge located within Municipal Corporation Prayagraj Limits polluting River Ganga & Yamuna within municipal limits will have to be addressed by making adequate arrangement for treatment as per directions of Engineer-In-Charge.2-The work for treatment of drains will have to be carried out for 180 days or till June 2025 whichever is earlier. 10 The details drains to be treated along with their dischargeas given below:- 11 1- Rajapur Drain- 27.166 MLD 12 2- ADA Colony Drain/ Jwala Devi Drain - 4.277 Mld 13 3- Jondhwal Drain- 6.753 MLD 14 4- Shankar Ghat Drain No. 01 -0.444 MLD 15 5- Shankar Ghat Drain No. 02- 0.946 MLD 16 6- Shankar Ghat Colony Drain (Near Phaphamau Bridge)- 0.951 MLD 17 7- Sadar Bazar Drain -4.787 MLD 18 8- Salori Drain(Partially) – 8.783 MLD 19 9- Shivkuti Drain No. 05- 0.320 MLD 20 10- Shivkuti Drain No. 06- 0.275 MLD 21 11- Shivkuti Drain No. 07(East)- 0.767 MLD 22 12- Govindpur Colony Drain (Purani Basti)- 0.218 MLD 23 13- Govindpur Colony Drain No 1- 0.275 MLD 24 14- Govindpur Colony Drain No 2- 0.323 MLD 25 15- Govindpur Colony Drain No 3- 0.162 MLD 26 16- Govindpur Colony Drain No 4- 0.271 MLD 27 17- Shivkuti Drain No 1- 1.192 MLD 28 18- Shivkuti Drain No 2- 0.162 MLD 29 19- Shivkuti Drain No 3 (North)- 0.218 MLD 30 20- Shivkuti Drain No 4- 0.278 MLD 31 21- Sasur Khaderi (Tapped but overflow) – 10.950 MLD 32 TOTAL ANTICIPATED DISCHARGE 33 (B)- Pumping arrangement forfollowing sewage drains upto 3 MLD flow, including topographical survey, water quality analysis of drains, package wise networking of drains, screening and pumping into nearby STP/SPS/Wet well (upto 100 m distance) as directed by Engineer in Charge with all civil, electro mechanical, Electric Connection and energy cost (from the grid ordiesel generator setsto ensure 24x7 operation of the plants to meet the project objectives) during the entire project period, Removal of all collected sludge and its disposal to the selected site upto 15 km distance, Operation and maintenance of the complete system and Removal of all infrastructure within one month after finishing of the project period.Note:-1- Any Other small drains. having very less discharge located within Municipal Corporation Prayagraj Limits polluting River Ganga & Yamuna within municipal limits will have to be addressed by making adequate arrangement for treatment as per directions of Engineer-In-Charge.2-The work for treatment of drains will have to be carried out for 180 days or till June 2025 whichever is earlier. 34 (Pumping only) 35 1- Dariyabad Kakaraghat Drain Mirapur- 2.113 MLD 36 2- Dariyabad Pipalghat Drain- 0.120 MLD 37 TOTAL ANTICIPATED DISCHARGE
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
26.
Power #10383050 Price Bid
Tender For Annual Civil & Electrical M&R Work for Residential Building Situated At 20-Clive Road Hydel Colony, Prayagraj - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. for all kinds of soil. 2 Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. 3 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. for all kinds of soil. 4 Excavating, supplying, stacking and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. 5 Providing and laying in position cement concrete of grade 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level : 6 Providing and laying in position cement concrete of grade1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level : 7 Providing and laying in position cement concrete of grade 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level : 8 Providing and laying cement concrete 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 9 Providing and fixing up to floor five level precast cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) 11 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification. 12 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 13 Providing and laying in positiongrade 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 14 Providing and laying in positiongrade 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 15 Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 16 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 17 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete 18 Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 19 Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform 20 Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ) 21 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers 22 Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts 23 Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases 24 Centering and shuttering including strutting, propping etc. and removal of form for Spiral staircases (including landing) 25 Centering and shuttering including strutting, propping etc. and removal of form for Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like 26 Centering and shuttering including strutting, propping etc. and removal of form for Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like 27 Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges 28 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick 29 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick 30 Mild steel and Medium Tensile steel bars for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 31 Mild steel and Medium Tensile steel bars for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 32 Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). 33 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 34 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) 35 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) 36 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) 37 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 38 Providing and fixing 18 mm thick Granite stone slab of colour black, Cherry/Ruby red gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels (Area of slab over 0.50 sqm) 39 Providing edge moulding to 18 mm thick Granite workcounters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 40 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 41 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : 42 Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. 43 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 44 Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 45 Providing and fixing 2nd class teak wood size 50x12 mm moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 46 Providing and fixing Second class teak wood panelled or panelled and glazed 30 mm thick shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) 47 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 48 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 49 Providing and fixing30mm thick glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.(Kiln seasoned and chemically treated hollock wood) 50 Providing and fixing35mm thick glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.(Kiln seasoned selected planks of sheesham wood) 51 Providing and fixing30mm thick glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.(Kiln seasoned selected planks of sheesham wood) 52 Providing and fixing30mm thick Panelled or panelled & glazed shutters for cup board using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.(Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws) 53 Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ( including ISI marked Stainless Steel butt hinges with necessary screws) 54 Providing and fixing ISI marked 30mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ( including ISI marked Stainless Steel butt hinges with necessary screws) 55 Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters ( including ISI marked Stainless Steel butt hinges with necessary screws) 56 Extra for Providing and fixing flush doors with On one side only decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) 57 Providing and fixing 12mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws andPVC sleeves etc., wherever necessary complete : 58 Providing and fixing 20mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws andPVC sleeves etc., wherever necessary complete : 59 Providing and fixing 25mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws andPVC sleeves etc., wherever necessary complete : 60 Providing and fixing 20mm dia (heavy type) nickel plated M.S. pipe curtain rods with nickel plated brackets : 61 Providing and fixing 25mm dia (heavy type) nickel plated M.S. pipe curtain rods with nickel plated brackets : 62 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. 63 Providing and fixing 125x65x2.12 mm ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) 64 Providing and fixing 100x58x1.90 mmISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) 65 Providing and fixing 75x47x1.70 mmISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) 66 Providing and fixing 50x37x1.50 mmISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) 67 Providing and fixing 150 mm ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) 68 Providing and fixing 125 mm ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) 69 Providing and fixing 100 mm ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) 70 Providing and fixing 250x16 mm ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 71 Providing and 250x10 mm fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 72 Providing and 200x10 mm fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 73 Providing and 150x10 mm fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 74 Providing and 100x10 mm fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 75 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378). 76 Providing and fixing 125 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 77 Providing and fixing 100 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 78 Providing and fixing 75 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 79 Providing and fixing 150 mm oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) 80 Providing and fixing 115 mm oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) 81 Providing and fixing 90 mm oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) 82 Providing and fixing 300 mm (weighing not less than 330 grams) oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 83 Providing and fixing 125mm special quality bright finished brass handles with screws for cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 84 Providing and fixing 100mm special quality bright finished brass handles with screws for cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 85 Providing and fixing 75mm special quality bright finished brass handles with screws for cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 86 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 87 Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 88 Providing and fixing Double strip (horizontal type) magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 89 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm),with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge (Extruded section profile size 48x40 mm) 90 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm),with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge (Extruded section profile size 42x50 mm) 91 Providing and fixing 12 mm thick Fire retardant plywood conforming to IS: 5509 panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 92 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge 93 Providing and fixing aluminum U beading of required size to Pre-laminated/flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge. 94 Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. 95 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. 96 Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete. 97 Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. 98 Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete. 99 Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). 100 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. 101 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) 102 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 103 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 104 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.(Using M.S. angels 40x40x6 mm for diagonal braces) 105 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 106 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 107 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar with 1:6 (1cement : 6 coarse sand) including filling the joints with same mortar, with common burnt clay non modular bricks: 108 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. 109 40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 110 18 mm thick Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 111 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 112 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. 113 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 114 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. 115 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. 116 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 117 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 118 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. 119 Providing and laying vitrified floor tiles Size 600x600 mm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. 120 Providing 1 mm thick with zinc coating not less than 275 gm/ m² corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 121 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 122 Providing & fixing 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloyIS designation31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 123 Providing and fixing Precoated/mill finish aluminium Ridges plain (500- 600mm) of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : 124 Providing 10 mm thick plaster of Paris (gypsum anhydrous) Flat surfaces ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): 125 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. 126 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) 127 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) 128 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) 129 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) 130 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) 131 Neat cement punning. 132 Distempering with 1st quality acrylic distemper (ready mixed) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 133 Finishing walls for New work (Two or more coats applied @ 3.84 kg/10 sqm) with water proofing cement paint of required shade : 134 Finishing walls for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) with Acrylic Smooth exterior paint of required shade : 135 Finishing walls for New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shadewith silicon additives. 136 With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood 137 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 138 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) 139 Painting (two or more coats) on 100mm diameter rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 140 Painting (two or more coats) on 150mm diameter rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 141 Painting Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 142 Polishing on New wood work with ready mixed wax polish of approved brand and manufacture : 143 Lettering with black Japan paint of approved brand and manufacture 144 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 145 Distempering for Old work (one or more coats) with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturerincluding applying additional coats wherever required to achieve even shade and colour 146 Applying priming coats with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre of approved brand and manufacture. 147 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge. 148 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 149 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 150 Polishing on Old wood work with ready made wax polish of approved brand and manufacture : 151 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 152 Finishing walls for Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface with Acrylic Smooth exterior paint of required shade : 153 Repairs to plaster of thickness 12 mm to 20 mm With cement mortar 1:4 (1 cement : 4 fine sand) in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 154 Fixing Door chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 155 Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on Each vertical member of door chowkhat and 2 nos on Each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. 156 Making the opening For door/ window/ clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. 157 Renewing Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) with putty and nails wherever necessary including racking out the old putty: 158 Renewing Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) with putty and nails wherever necessary including racking out the old putty: 159 Renewal of old putty of glass panes (length) 160 Refixing old glass panes with putty and nails 161 Fixing old glass panes with wooden fillets (excluding cost of fillets) 162 Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. 163 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. 164 Providing and fixing 20 mm diameter. brass curtain rods ofwall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 165 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modifiedself curing mortar, including disposal of rubbish, all completeas per the direction of Engineer-In-Charge. 166 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. 167 Disconnecting damaged overhead/terrace PVC water storage tankof any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. 168 Providing & fixing Orissa pattern W.C Pan of size 580x440 mm White vitreous china water closet squatting pan (Indian type) along withS or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 169 DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. 170 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 Metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall 171 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 172 Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 Metres lead as per direction of Engineer- in-charge. 173 Demolishing Nominal cementconcrete 1:3:6 or richer mix (i/c equivalent design mix manually/ by mechanical means including disposal of material within 50 Metres lead as per direction of Engineer - in - charge. 174 Demolishing Nominal cementconcrete 1:4:8 or leaner mix (i/c equivalent design mix manually/ by mechanical means including disposal of material within 50 Metres lead as per direction of Engineer - in - charge. 175 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 Metres lead as per direction of Engineer - in- charge. 176 Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 Metres lead as per direction of Engineer-in-charge. 177 Removing mortar from bricks in From brick work in cement mortar and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): 178 Dismantling doors, windows and clerestory windows (steel or wood) shutter Of area 3 sq. Metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 Metres lead : 179 Dismantling doors, windows and clerestory windows (steel or wood) shutter Of area beyond 3 sq. Metres including chowkhats, architrave, holdfasts etc. complete and stacking within 50 Metres lead : 180 Taking out doors, windows and clerestory window shutters (steel or wood) Of area 3 sq. Metres and belowincluding stacking within 50 Metres lead : 181 Taking out doors, windows and clerestory window shutters (steel or wood) Of area beyond 3 sq. Metres including stacking within 50 Metres lead : 182 Dismantling For thickness of tiles 10 mm to 25 mmwork in floors and roofs laid in cement mortar including stacking material within 50 Metres lead. 183 Dismantling For thickness of tiles above 25 mm and up to 40 mmwork in floors and roofs laid in cement mortar including stacking material within 50 Metres lead. 184 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 Metres lead : 185 Dismantling G.S. Sheetroofingincludingridges,hips,valleysandguttersetc., and stacking the material within 50 Metres lead of: 186 Dismantling Asbestos Cement sheetroofingincludingridges,hips,valleysandguttersetc., and stacking the material within 50 Metres lead of: 187 Dismantling tiled roofing with battens, boarding etc. complete includingstackingofserviceablematerialanddisposalofunserviceable material within 50 Metres lead. 188 Dismantlingbarbedwireorflexiblewireropeinfencingincludingmaking rolls and stacking within 50 Metres lead. 189 Dismantling40 mm thick precast concrete orstone slabsin walls, partition walls etc. including stacking within 50 Metres lead : 190 Dismantling40 mm to 75mmthick precast concrete orstone slabsin walls, partition walls etc. including stacking within 50 Metres lead : 191 Dismantling cement asbestos or other hard board ceiling or partition wallsincludingstackingofserviceablematerialsanddisposalof unserviceable materials within 50 Metres lead. 192 Dismantling of flushing cistern of all types(C.I./PVC/Vitrious China) includingstackingofusefulmaterialsnearthesiteanddisposalofunserviceable materials within 50 Metres lead. 193 Dismantling old plaster or skirting raking out joints and cleaning the surfaceforplasterincludingdisposalofrubbishtothedumping ground within 50 Metres lead. 194 Dismantlingaluminium/Gypsumpartitions,doors,windows,fixed glazing and false ceiling including disposal of unserviceable material andstackingofserviceablematerialwithin50metersleadas directed by Engineer-in-charge. 195 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping groundorasapprovedbyEngineer-in-charge,beyond50minitial lead, for all leads including all lifts involved. 196 Cuttingroadandmakinggoodthesameincludingsupplyofextra quantities of materials i.e. aggregate, moorum screening, red bajri and labour (required.bituminous portion) 197 Paintingroadsurfacemarking for New work (Two or more coats) withadequatenosofcoatstogive uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning thesurfaceofalldirt,scales,oil,greaseandforeignmaterialetc. complete. 198 Paintingroadsurfacemarking for Old work (One or more coats) withadequatenosofcoatstogive uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning thesurfaceofalldirt,scales,oil,greaseandforeignmaterialetc. complete. 199 Taking out existing CC interlocking paver blocks from footpath/ central verge,includingremovalofrubbishetc.,disposalofunserviceable materialtothedumpingground,forwhichpaymentshallbemade separately and stackingof serviceable materialwithin 50Metre lead as per direction of Engineer-in-Charge. 200 Layingoldcementcocreteinterlockingpaverblocksofanydesign/ shapelaidinrequiredline,level,curvature,colourandpatternover and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer- in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 201 Providing and laying 80mmthickC.C.paverblockofM-35gradewith approved colour design and pattern.factory made chamfered edge Cement Concrete paverblocksinfootpath,parks,lawns,drivewaysorlighttraffic parkingetc,ofrequiredstrength,thickness&size/shape,madeby tablevibratorymethodusingPUmould,laidinrequiredcolour& patternover50mmthickcompactedbedof sand,compactingand properembedding/layingofinterlockingpaverblocksintothesand beddinglayerthroughvibratorycompactionbyusingplatevibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. completeall as per direction of Engineer-in-Charge. 202 Providing andfixingWhiteVitreouschinaOrissapatternW.C.panofsize 580x440 mm with integral type foot rests waterclosetsquatting pan(Indian typeW.C. pan)with100mmsandcastIronPorStrap,10litrelowlevel whiteP.V.C.flushingcistern,includingflushpipe,withmanually controlleddevice(handlelever)conformingtoIS:7231,withall fittingsandfixturescomplete,includingcuttingandmakinggood the walls and floors wherever required: 203 Providing and fixing W.C. pan with ISI marked white solid plastic seat and lid white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard makeandmosquitoproofcouplingofapprovedmunicipaldesign complete,includingpaintingoffittingsandbrackets,cuttingand making good the walls and floors wherever required : 204 Providingandfixing Oneurinalbasinwith5litrewhiteP.V.C.automaticflushing cistern whitevitreouschinaflatbackorwallcorner typelippedfronturinalbasinof430x260x350mmand 340x410x265 mm sizes respectively with automatic flushing cistern withstandardflushpipeandC.P.brassspreaderswithbrass unions and G.I clamps complete, including painting of fittings and brackets,cuttingandmakinggoodthewallsandfloorswhereverrequired : 205 ProvidingandfixingWhiteVitreousChinaWashbasinsize550x400mm with a pair of 15 mm C.P. brass pillar taps washbasinwithC.I.brackets,15mmC.P. brasspillartaps,32mmC.P.brasswasteofstandardpattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 206 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brasssingleholebasinmixerofapprovedqualityandmake, including painting of fittings and brackets, cutting and making goodthe walls wherever required:- (a)White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 207 Providingandfixingwhitevitreouschinapedestalforwashbasin completelyrecessedatthebackforthereceptionofpipesand fittings. 208 Providing and fixing 610x510 mm bowl depth 200 mm Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required (Kitchen sink without drain board) 209 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 Metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 210 Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 211 Providing and fixing 10 litre (full flush) capacity-white controlled flush, low level cistern made of vitreous china with all fittings complete. 212 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 213 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 214 Providing and fixing15 mm nominal dia CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 215 Providingandfixing 32mm diaFlexible pipe P.V.C.wastepipeforsinkorwashbasin including P.V.C. waste fittings complete. 216 Providing and fixing 100 mm sand cast Iron grating for gully trap. 217 Providingandfixinginposition25mmdiametermosquitoproofcoupling of approved municipal design. 218 Providing and fixing 600x450 mm beveled edge mirror of superior glass(ofapprovedquality)completewith6mmthickhardboard ground fixed to wooden cleats with C.P. brass screws and washerscomplete. 219 Providing andfixing Circular shape 450 mm dia mirrorofsuperiorglass(ofapprovedquality)andofrequiredshapeandsizewithplasticmouldedframeof approved make and shade with 6 mm thick hard board backing : 220 Providing andfixing 600x120x5 mmglass shelfwith edges round off, supported on anodised aluminium angle frame with C.P. brass bracketsandguardrailcompletefixedwith40mmlongscrews, rawl plugs etc., complete. 221 Providing and fixing C.P. brass toilet paper holder : 222 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 223 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 224 Providing and fixing PTMT 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 225 Providing and fixing PTMT 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 226 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. 227 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. 228 Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work - Exposed on wall) 229 Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work - Exposed on wall) 230 Providing and fixing 25 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work - Exposed on wall) 231 Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work) 232 Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work) 233 Providing and fixing 25 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work) 234 Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 235 Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 236 Providing and fixing 25mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 237 Providing and fixing 32mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 238 Providing and fixing 40mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 239 Providing and fixing 50mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 240 Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.(Internal work - Exposed on wall) 241 Providing and fixing 20 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.(Internal work - Exposed on wall) 242 Providing and fixing 25 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.(Internal work - Exposed on wall) 243 Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc.(External work) 244 Providing and fixing 20 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc.(External work) 245 Providing and fixing 25 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc.(External work) 246 Providing and fixing 32 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc.(External work) 247 Providing and fixing 40 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc.(External work) 248 Providing and fixing 50 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc.(External work) 249 Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) : 250 Providing and fixing 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) : 251 Providing and fixing 32 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) : 252 Providing and fixing 15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 253 Providing and fixing 20 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 254 Providing and fixing 15mm norminal bore 45 cm length uplasticised PVC connection pipe with brass unions : 255 Providing and fixing 20mm norminal bore 45 cm length uplasticised PVC connection pipe with brass unions : 256 Providing and fixing 100 mm diameter C.P. brass shower rose with 15 or 20 mm inlet : 257 Providing and fixing 150 mm diameter C.P. brass shower rose with 15 or 20 mm inlet : 258 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 259 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 : 260 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 261 Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 262 Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 263 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 264 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 265 Providing and fixing Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) :(For fixed portion) 266 Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) :(For fixed portion) 267 Providing and fixing glazing With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 268 Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 269 Providing and fixing glazing With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 270 Providing and fixing With stainless steel cover plate minimum 1.25 mm thicknessdouble action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 271 Providing and fixing With brass cover plate minimum 1.25 mm thicknessdouble action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 272 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) 273 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. (For the purpose of measurement the entire treated surface will be measured.) 274 Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer(dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. 275 Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. 276 Providing and fixing With15mmthick fullyperforatedsquare/buttedgelightweightcalcium silicate panels/ tiles in position wall panelling at all heights with integral densified calcium silicatepanels/tilesofsize595x595mm,havingNRC(NoiseReductioncoefficient)of0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistanceof 100%,thermalconductivity<0.043W/mK asperASTM518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mmthickpressedsection(galvanizing@120gramspersqmincludingbothsides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor andceilingchannel sectionofsize50x32mfixedtothefloorandsoffitat600mm centersusing12mmdia,50mmlongwedgetypeexpandedzincalloy dashfastnerwith 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finallycalcium silicate non combustible panels/tiles are to bescrew fixed withselftapping panheadnickel coatedmild steelscrewsofsize13x3.2mmon tothisgridleavingan evengroove of1 mm betweenthepanels. The joints betweenthepanelsaretobedulyjointedandfinishedusingrecommendedjointing calcium silicate based compound and fiber joint tape roll 50mm wide(90 Metre )roll and twocoatsofprimersuitableforpanellingaspermanufacturersspecificationasper direction of Engineer-in-Charge all complete. 277 Providing and fixing With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%,LightReflectance≥85%,ThermalConductivityk=0.052-0.057w/mK,Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanized iron section of 0.33 mmthick (galvanized @120 gsm)comprisingofmainTrunnersof15x32mmoflength3000mm,crossTofsize 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length600mm toform gridmoduleofsize 600x600mm suspendedfrom ceiling using galvanizedmildsteelitem(galvanised@80gsm)50mmlong8mmouterdiameterM-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L- shapeleveladjusterofsize85x25x2mm,spacedat1200mmcentretocentrealong main‘T’.Thesystemshouldrestonperipherywalls/partitionswiththehelpofGI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thicksheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wallS.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carriedoutasperspecifications,drawingsandasperdirectionsoftheengineer-in- charge. 278 Providingandfixingharddrawnsteelwirefabricofsize75x25mmmeshorother suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. 279 FillingofjointsbetweenRCCplinthbeam/floorslabandwallpanelofexternalwalls, toilet / bath room / wet areas walls on all floor and parapet wall over roof slab, stair case headroomatthetimeoferectionofGFRGpanelswithGroutRW/equivalentsealant compound after the erection of panelbeforethe infill of concrete in panel cavities and fine finish. This applies for all horizontal and vertical joints between GFRG wall and slab panels. 280 WaterproofingtreatmentofVerticaljoints(ofexternalsideandinternalside)between doorframe,window&ventilatorframes(onallfoursides)ofouterwalloverthe Zycosil/equivalent & Zycoprime/equivalent solution already applied (before the installation of door / window / ventilator frames in position) and fine finish with Grout RW/equivalent. 281 WaterproofingtreatmentofRCCsunshadewith Zycosil/equivalentwaterproofing Solution(1litreofZycosil/equivalent&20litresofwaterstirredfirst&2litresof Zycoprime/equivalent addedandstirred (total23litres))till itmeetsthesaturationlevel and testing as per RILEM or bywater drops test in which water drops do not absorb but drops remain or rolls. 282 In-filling / sealing of joint between RCC lintel cum sunshade and wall (on external side) in all floors by pushing in Grout RW/equivalentin paste form and coving 20 mm x 20 mm after applying a coat of Zycosil/equivalent & zycoprime/equivalent solution before cement plastering of top, bottom and sides of RCC sunshade. 283 Concreteworkwith40mmgaugebrickballastobtainedfrombreaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 includingcost of all labour, materials, T&P etc required for proper completion of work. 284 Brickworkinfoundation&plinthwitholddismantled bricks(suppliedby departmentfreeofcost)andcoarsesand mortarin1:6includingsupply ofallothermaterials,labour,removingmortar&cleaningofold&usedbricks,T&P etc complete. 285 Supply and filling brick bat in soak pit including all labour,material and T&Petc complete. (for 01 soak pit) 286 Supplying & fixing 24 gauge annodized aluminium sheet of approved qualityincludingcutting,wastageandfixingthesameoverthewooden door shutters with nails with all material, labour and T&P 287 Providingandfixinginplaceafullheightstoragecabinet450mmdeep made with19 mm thick ISI marked plyborad, allinterior surfaces to finishedwithpastingof0.8mmthickmicaandallexteriorsurfacestobe finshed with pasting of 1 mm thick mica of texture and colour as approved byEngineerinChargeincludingalllabour,T&P,otheritemslike(butnot limitedto)fevicol,nailsscrews,higes,sliders,doorhandles,multipurpose lockofgodrejorequivalentrateetc.requiredforpropercompletionof works, to be measured interms of front area only. 288 ProvidingandfixingfullheightPartitionwith02NOS12mmthickISI marked ply board, all surfaces to finished withf 1 mm thick mica of texture andcolourasapprovedbyEngineerinChargeandfixedinpolishedteak woodincludingalllabour,T&P,otheritemslike (butnot limitedto) fevicol, nailsscrews,hinges,sliders,doorhandles,multipurposelockofgodrejor equivalent rate etc. required for proper completion of works, to be measured interms of front area only 289 Providingandfixing12mmthickframelesstoughenedglassdoorshutter ofapprovedbrandandmanufacture,includingprovidingandfixingtop& bottom pivot & double acting hydraulic floor spring type fixing arrangement ,Doorhandle,lockandstopperetcandmakingnecessaryholesetc.for fixingrequireddoorfittings,allcompleteasperdirectionofEngineer-in- charge 290 Supply and fixing 6mm thick polycarbonate multiwall sheet ,fixing in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. 291 Providing (12x15) mm section groove in plasterincluding all material, labour andT&P etc. required for proper completion of the work.CSI No.11.16 292 2.5 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CCCSI No.12.26 293 4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC CSI No. 12.28 294 Dismantling ofdry B.O.E. Floor and proper stacking of dismantled bricks as per direction of E/C. up to 60 m lead. 295 Dismantling and re-laying of dry B.O.E. floor including cost of all labour and T&P required forproper completion of work.(labour rates only) 296 Cleaning panes of glass with spirit of caustic soda including supply of all materials,labour and T&P etc.required for proper completion of the work. 297 Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. 298 Cleaning and opening of chocked W.C./ bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020. 299 S/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the Engineer - in - charge. 300 Cleaning of existing pipe line of different dia. ranging from 4 to 2 dia. including digging trenches and refilling, opening of pipes, cleaning of pipes, cutting, threading, if required fixing and including making good the road, wall etc as directed by the engineer I/C. 301 Cleaning of existing water pipe line of different dia up to 2 dia including digging trenches and refilling,opening and cleaning of pipes,cutting,threading,if required fixing and including making good the road and wall etc. as directed by the Engineer in charge. 302 Cleaning of R.C.C. over head tank up to capacity of one lac. Liters and chlorinating with blEaching power mixed to water as per direction of Engineer - in - charge complete. 303 Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge. 304 Attending to petty maintenance service like plumbingservice,welder service, mansion service and carpenter servicerequired as below. (Job attending by one no. Plumber/welder/mason /carpenter with oneno. helper per hour or part of an hour.) 305 Cleaning and sweeping of roof of residence as and when requiredincluding uprooting of rank vegetation and disposal of thegarbage upto 50 M. 306 Providing and fixing of 150 mm dia PVC pipeof 6 Kg/sqcmwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. 307 Providing and laying 75 mm Dia. SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 308 Providing and laying 90 mm Dia. SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 309 Providing and laying 110 mm Dia. SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 310 Making arrangement for sweeping, cleaning of road, lanes in back of houses,collecting refuse of bushes & unwanted plants, vegetations etc. & disposal of all rubbish, materials industbins inside the colony area with engaging atleast one number of sweepers including all labour, T&P,etc.required for completion of work as directed by E/I. 311 Making arrangement for sweeping, cleaning of EE,ECD(D), Georgetown ,Prayagraj office rooms, cleaning of dustbin, toilets , dusting of almirahs,tables etc. using phenyle,dusting cloth etc. and disposal of waste outside office premise in municipal dustbinswith engaging sufficient number ofsweepersincluding all labour, T&P,etc.required for completion of work as directed by E/I.(NSI)(consumable items as phenyle,dusting cloth ,brooms etc shall be provided by the department free of cost.) 312 Cleaning of main drain or width more than 300mm including disposal of waste refuses studge out side the boards ara including washing and cleaning by clean water completely as per direction of the E/I. including cost of all labour, T&P etc. required for completion of the work. (CSINo.20.14) 313 Cleaning of main drain or width less than 300mm including disposal of waste refuses studge out side the boards ara including washing and cleaning by clean water completely as per direction of the E/I. including cost of all labour, T&P etc. required for completion of the work. (CSINo.20.15) NSI Sl. No.63 314 Operation of tube well daily by a suitable experienced operator continously or in different intervals as per program as per program fixed by Engineer-in-charge including opening and closing of valves,changing of fuse wire etc. As requrird for proper running of Tube well. (NSI) 315 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required..Group C 316 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet 317 Supplying and fixing of 20 mm of medium class PVC conduit along with accessories in surface/recess including junction box, cutting the wall and making good the same in case of recessed conduit as required. 318 Supplying and fixing of 25 mm of medium class PVC conduit along with accessories in surface/recess including junction box,cutting the wall and making good the same in case of recessed conduit as required. 319 Wiring for circuit/ submain wiring with 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 320 Wiring for circuit/ submain wiring with 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 321 Wiring for circuit/ submain wiring with2 X 6 sq. mm + 1 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 322 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required . 323 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 324 Supplying and fixing 5 amps to 32 amps rating,Single pole, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 325 Supplying and fixing 63 amps, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 326 Supplying and fixing 40 amps, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 327 Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 328 Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 329 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 330 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm) 331 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 332 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm) 333 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm) 334 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm) 335 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm) 336 Supplying and drawing following 3 x 2.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 337 Supplying and drawing following 3 x 4 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(DSR E&M 2022 1.17.21) 338 Rewinding of burnt ceiling fan with approved copper wire including cost of all materials, labour and T&P etc. complete (Burnt wirewill not be taken back.) 339 Greasing of ceiling fan after cleaning the bearing and shaft withoil / petrol and its testing. 340 Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.(CSI No. 28.41) 341 Supply of 9 watt LED Bulb make Philips, Syska, Bajaj etc or its equivalent as directed by E/I. 342 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.(DSR E&M 2022 19.1) 343 Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havellsor equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.(CSI No. 28.38) 344 Supply and Fixing of 3 blade wall fan ofHavells platina 400 mm or equivalent including all material, T&Petc required for proper completion of work as approved by engineer in charge.(CSI No. 28.37)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
27.
Educational and Research Institute #10365642 Price Bid
Tender For Comprehensive Annual Operation And Maintenance Works & Services At Central University Of Rajasthan.; 1 Comprehensive Annual Operation and Maintenance Works & Services 2 SH-I (a) Deployment of Maintenance Gang for day to day Civil Maintenance work at CURAJ 3 SH-I (b) Operation And Maintenance Of 750 KLD Sewerage Treatment Plant at CURAJ 4 SH-II (a) Electrical & Mechanical Preventive And Day To Day Maintenance Works, Annual Operation, Repair, Maintenance And Periodic Servicing Works Of Pump Houses And Annual Electrical Works At CURAJ 5 Annual preventive and day to day maintenance, to upkeep all the electrical internal & external installations, fittings, fixtures, wiring, Lights, Fans, Geysers etc. functional in the CURAJ campus, for all days in a month, including Sundays and Holidays, including manpower, labour, machinery, general maintenance items, tools & tackles for all deputed staff, safety tools for LT & HT power supply, various type of ladders/tipaya/chopaya etc. as required on site, complete in all respects, as per standard practice. Indicative items are as under: • Wiring/Cabling.• Metal/PVC boxes.• Switches, sockets and accessories of different ratings.• 01phase/03 phase power points & circuits.• 01/03 phase Energy Meters.• Light points/ Fan pts/ Exhaust Fan pts/Call bell pts. etc.• All type of indoor and outdoor lights (conventional/LED/HPSV/MVSV etc.) fittings.• All type of fans (Ceiling/Exhaust/pedestal/wall).• HVLS fans.• Water heaters.• Auditorium stage lights.• Air curtains and electric fly catchers.• Rising mains bus trunking and overhead bus bar of different ratings.• Sandwich rising mains with aluminium bus bar of different ratings.• Switch, disconnector, SFU and MCCB of different ratings.• MCBs, Isolators, RCCBs and MCB DBs of different ratings.• Cable and Boxes of different sizes.• Brass compression glands of different sizes.• Aluminium lugs of different sizes.• HT/LT Cable fault detections and jointing kits.• Overhead electric line.• Road lights.• Lightning arrester and earthing system.• All Electrical indoor and outdoor panels and panel rooms of all buildings.• Maintenance of records etc. and as per tender document. 6 Comprehensive Annual Electrical Operation, Repair, Maintenance and Periodic Servicing Works of pump houses and other water & booster pumps/motors/starters along with associated panels and accessories for all days in a month including Sundays and Holidays, including manpower, machinery, spare parts, consumables, tools & tackles for all deputed staff, safety tools for LT power supply, ladders, ropes etc. as required on site, complete in all respects.Note: Tentative quantity of motors & pumps of different ratings is 30. 7 Providing of uniform to all the deputed staff with reference to (a & b) above, as prescribed by the University and as per tender document. 8 CPWD DSR (E&M) 2022/Chapter-01: Wiring.The bidder has to quote the rates above / below / at par on DSR (E&M) 2022 rates (including all) considering estimated cost of work Rs. 5,00,000/- 9 CPWD DSR (E&M) 2022/Chapter-02: MCCB, MCB, DBs.The bidder has to quote the rates above / below / at par on DSR (E&M) 2022 rates (including all) considering estimated cost of work Rs. 1,00,000/- 10 CPWD DSR (E&M) 2022/Chapter-05: EarthingThe bidder has to quote the rates above / below / at par on DSR (E&M) 2022 rates (including all) considering estimated cost of work Rs. 1,00,000/- 11 Detection of fault in underground electric Low Tension (LT)/High Tension (HT) cable incl. fault detection machine charges, digging & labour charges etc. complete in all respects as per standard practice. 12 Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor LT cable of 1.1 KV grade as required. 13 3½ X 25 sq. mm 14 3½ X 35 sq. mm 15 3½ X 50 sq. mm 16 3½ X 70 sq. mm 17 3½ X 95 sq. mm 18 3½ X 120 sq. mm 19 3½ X 150 sq. mm 20 3½ X 185 sq. mm 21 3½ X 240 sq. mm 22 3½ X 300 sq. mm 23 3½ X 400 sq. mm 24 4 X 16 sq. mm 25 Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor HT cable of 11 KV grade as required : 26 70 sq. mm 27 120 sq. mm 28 185 sq. mm 29 240 sq. mm 30 300 sq. mm 31 400 sq. mm 32 General inspection & patrolling of about 10 km long overhead HT/LT lines feeder wise for identification of maintenance work to be carried out i/c strengthing of cross arms with clamps including tightening of nut bolts, removal of birds nest and foreign material from line along with tree/bush trimming under these lines. (to be carried out before starting of summer season and as per the requirement). 33 Annual Servicing of Fans (Ceiling/Exhaust/Wall/Pedestal etc.) installed in various buildings of the University i/c checking the unit with accessories for functionality tests, replacement of nut-bolts & locking pins/clips wherever reqd, oiling/greasing, cleaning, pasting of service/repair slips on fan and any other minor repair works required on site i/c labour, tools & takels charges as per standard practice and directions of EIC. Note: 1) This work also includes replacement of spare parts of fans like condensors, regulators, fan hooks as required during servicing and these spare parts will be provided by the University.2) This work excludes all major repair works like rewinding, replacement of bush/bearing etc. 34 Copper rewinding of existing burnt fans (Ceiling/ Exhaust/Wall/Pedestal Fans) under buyback of old copper incl. handling charges etc. as per standard practice. 35 Replacement of parts like bush/bearing etc. with new one of same size/rating under buyback of faulty one as per standard practice incl. handling charges. 36 Repairing of rotor/stator/shaft etc. of fans as required as per standard practice incl. handling charges. 37 Comprehensive AMC Work of Online UPS(s) of different ratings installed in various buildings of CURaj 38 Comprehensive AMC Work of Online UPS(s) of different ratings installed in various buildings of CURaj, including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects excluding replacement of batteries.Note: This work includes general R&M on monthly basis, preventive R&M and servicing on quarterly basis and unlimited breakdown calls through qualified & experienced persons. 39 14 Nos. 1 kVAOnline UPS 40 08 Nos. 2 kVA to 3 kVA Online UPS 41 08 Nos. 5 kVA to 6 kVAOnline UPS 42 02 Nos. 10 kVA Online UPS 43 06 Nos. 15 kVA to 20 kVA Online UPS 44 02 Nos. 40 kVA Online UPS 45 Replacement of following capacity faulty/dead SMF rechargeable batteries with new batteries of same rating/capacity along with connections, testing and commissioning etc. as required on site as per standard practice, under buyback offer. Make: Exide/Amaron/Luminous/HBLWarranty:minimum 02 years onsite or as per OEM, whichever is higher. 46 18 AH, 12 V 47 26/28 AH, 12 V 48 42/45 AH, 12 V 49 65 AH, 12 V 50 75 AH, 12 V 51 120 AH, 12 V 52 150 AH, 12 V 53 Comprehensive AMC Work of 86 Nos. Water Coolers of 150 LPH capacity each, installed in various buildings of CURaj 54 Comprehensive AMC Work of 86 Nos. Water Coolers of 150 LPH capacity each, installed in various buildings of CURaj, including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects.Note: This work includes general R&M on monthly basis, preventive R&M on quarterly basis, annual servicing and unlimited breakdown calls through qualified & experienced persons. 55 Repairing of 45 Nos. faulty Water Coolers of 150 LPH capacity each, installed in various buildings of CURaj including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice before starting the CAMC of faulty equipment. 56 SH-II (d) Comprehensive AMC Work of HVAC System (Ductable / VRV-VRF / Cassate / Split / Tower / Window Type Air Conditioners and ETAC System) installed in various buildings of CURajComprehensive AMC Work ofHVAC System (Ductable / VRV-VRF / Cassate / Split / Tower / Window Type Air Conditioners and ETAC System) installed in various buildings of CURaj, including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice and directions of Engineer-in-Charge.Note: This work includes general R&M on monthly basis, preventive R&M and servicing on quarterly basis and unlimited breakdown calls through qualified & experienced persons. 57 100 hp rated inverter technology based VRV/VRF type Air Conditioning System installed in CIL Building. Make: Hitachi 58 40 hp rated inverter technology based VRV/VRF type Air Conditioning System installed in VCS, Admin Building. Make: Hitachi 59 04 Nos. 11.0 TR capacity Ductable Air conditioning units with Scroll Compressor with R 410 A Refrigerant, vibration isolators etc. complete. Make: Hitachi 60 03 Nos. 5.5 TR capacity Ductable Air conditioning units with Scroll Compressor, R 410 A Refrigerant, vibration isolators etc. complete. Make: Carrier 61 03 Nos. Ceiling-mounted 3.0 TR Cassette Air Conditioning units complete. Make: Bluestar 62 400 Nos. Window/Split/Tower type air conditioners. 63 02 Nos. 30000 CFM, Air ducting system (ETAC) 64 04 Nos. 28000 CFM, Air ducting system (ETAC) 65 02 Nos. 10000 CFM, Air ducting system (ETAC) 66 02 Nos. 4000 CFM, Air ducting system (ETAC) 67 Repairing of faulty 100 Nos. Split ACs, 10 Nos. Tower Air-conditioners and 01 No. 5.5 TR Ductable AC, installed in various buildings of CURaj including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice before starting the CAMC of faulty equipment. 68 SH-II (e) Comprehensive Annual Operation, Repair and Maintenance of 04 Nos. 11/0.433 kV electric sub-stations and 05 numbers DG Sets at CURaj. 69 Comprehensive Annual Operation, Repair and Maintenance of 04 Nos. 11/0.433 kV electric sub-stations and 05 numbers DG Sets along with associated panels etc. through OEM/Authorized Service Agents of OEM only, including manpower for operational purpose, labour, machinery, spare parts, Control Panel/DG Set Batteries, consumables, tools & plants etc. complete in all respects, as per standard practice and directions of Engineer-in-Charge.Note: 1) This work includes operators in all three shifts on 24*7*365 basis at each ESS.2) This work includes general R&M on monthly basis, preventive R&M on quarterly basis, annual servicing i/c all B/C/D checks and unlimited breakdown calls through qualified & experienced persons, as per OEM’s standard guidelines & service manuals. 70 SH-II (f) Comprehensive Annual Operation (in general shift), Repair and Maintenance of 14 nos. Johnson make, machine room less passenger lifts at CURaj. 71 Comprehensive Annual Operation (in general shift), Repair and Maintenance of 14 nos. Johnson make, machine room less passenger lifts along with associated panels etc. through OEM/Authorized Service Agents of OEM only, including manpower, labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice.Note:1) This work includes one lift operator in general shift on 24*7*365 basis in Admin Building.2) This work includes general R&M on monthly basis, preventive R&M on quarterly basis, annual servicing and unlimited breakdown calls through qualified & experienced persons, as per OEM’s standard guidelines & service manuals. 72 SH-III Comprehensive Annual Repair & Maintenance Work of Fire Hydrant System and Fire Alarm System installed at CURaj. 73 Comprehensive Annual Repair & Maintenance Work of all Fire Hydrant System installed in various building of the University (tentative buildings = 30 nos.) as specified in Schedule of Work, including manpower, labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice.Note: This work includes general R&M on monthly basis, preventive R&M and servicing on quarterly basis and unlimited breakdown calls through qualified & experienced persons. 74 Comprehensive Annual Repair & Maintenance Work of all Fire Alarm System and associated equipment installed in various building of the University as specified in Schedule of Work, including manpower, labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice.Note: This work includes general R&M on monthly basis, preventive R&M and servicing on quarterly basis and unlimited breakdown calls through qualified & experienced persons. 75 Repairing of existing non-functional Fire Hydrant System including associated equipment, installed in B1 to B7 Hostel buildings, KV Building and B/C/D type Staff Quarter Blocks of CURaj including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice before starting the CAMC of faulty equipment. 76 Repairing of existing non-functional Fire Alarm System including associated equipment, installed in various buildings of CURaj including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice before starting the CAMC of faulty equipment. 77 SH-IVComprehensive Annual Maintenance Contract for RO Plants/Purifiers. 78 The scope of work includes comprehensive annual maintenance and servicing of RO Plants/Purifiers and submitting a report after every visit. The scope of work includes checkup of each Unit/system and general cleaning, chemical cleaning of cartridge, if required, replacement of all type of membrane, all type of filters, all pipes, S.V., TDS Controller, all type of sensors, pump etc. as per requirements of the University during the CAMC Period. 79 Supply and Installation (under buy back) of Reverse Osmosis Plant of 50 LPH Capacity Make Eureka ForbesNote: Old Reverse Osmosis Plant of 50 LPH Capacity - Make Eureka Forbes will be the property of the Contractor. Hence contractor may be advised to quote their rates accordingly. 80 SH-VComprehensive Operation and Maintenance of IT Works. 81 Comprehensive Operation and Maintenance of installations IT Works (Operation & CAMC of Audio & Video Conferencing System, Networking items for LAN and Wi-Fi systems like Switches, Active & Passive network components, Smart class rooms Equipments including PA systems, Hardware and software maintenance of Computers, Laptops, Printers, Projectors, Servers), CCTV Systems. as per the details given below: 82 Hardware Items 83 Laptops : 84 Desktop System: 85 Server: 86 Printers: 87 LCD Projector: 88 CCTV System 89 IP Camera 90 DVR Camera 91 Switch (24 port) 92 Switch (8 port) 93 Switch (4 port) 94 42 Screen 95 32 Channel NVR 96 8 Channel NVR 97 4 Channel NVR 98 Surveillance Hard Disk 10 TB 99 Surveillance Hard Disk 4 TB 100 Surveillance Hard Disk 2 TB 101 Biometric Access Control Systems 102 Face Biometric Machine 103 Voice System 104 IP-PBXMachine 105 IP Phone 106 IP Phone DSS KEY 107 Data Networking System 108 Switch(48 Port) 109 Switch (24 Port) 110 Core Switch 111 LAN points 112 Audio Video Conferencing System 113 Group Video Conferencingdevice including camera, speakerphone with USB plug-and-play connectivity 114 PTZ Video Conferencing Camera 115 Smart Classrooms System including PA System 116 Smart Classroom equipped with, interactive screen 75/86 inch, audio systems, digital podium with mini PC, PTZ cameras and other related items 117 SH-VI Comprehensive Maintenance of Horticulture and operation & maintenance of Drip Irrigation System. 118 Horticulture Manpower in General Shift in all days except Sundays and holidays (Unskilled). All tools tackles shall be arranged by contractor within its quoted rates.• Complete maintenance of Trees, Plants and peripherals, shrubs, hedge, lawns, (Including cricket ground, hockey ground and football ground etc.) cemented potted plants, flower beds, creepers etc. within the campus of the Central University of Rajasthan.• Maintenance includes weeding, pruning, gap filling, watering, mowing of lawn, hoeing, hedge-clipping, application of insecticide & pesticide, top dressing of lawn with good earth and manure including other maintenance work as directed by the University from time to time.• Fertilizers, Manures, plant protection materials etc. will be provided by the contractor nothing extra shall be paid in this regard.Maintenance of Drip Irrigation System, (water sprinkler system installed at cricket, football and hockey grounds and another places of the University etc.) periodical checking of the system cleaning, oiling, greasing, routine maintenance, realignment, necessary safety arrangements & repair/ replacement of consumables such as Super flow screen filters, Gravel filters, Pressure relief valve, Non return valve, stainless steel pressure gauges,by pass valve PP, PVC control/ball valves, sub main flush valve, Reinforced nylon air release valve CPVC gate valves, super flow disc clean filters, PVC pipes and fittings etc. as per direction of Engineer-in-charge. This shall include all cost involved in maintenance except for electricity for operation, which shall be provided by the University free of cost. 119 SH-VIIMechanized Housekeeping Services, Garbage Collection & Disposal Services, and Pest Control Services at CURAJ. 120 ProvidingMechanized House Keeping Service include machine enabled cleaning, sweeping, wiping, dusting, moping, freshening, garbage collection, segregation & disposal, vacuum cleaning, scrubbing and any other similar tasks as assigned by CURAJ authorities from time to time.Consumable, like duster, Soap, chemicals, wipers, Phenyl and other cleaning materials for toilets and floor required as indicated in list under the scope of work etc.All façade glass should be cleaned once in a month including glass doors and windows.Providing pest Control Services, Rodent Control Services, Fogging & Fumigation against mosquito & larva, Fly management services, termite treatment etc. as per tender terms and conditions and directions of the University. 121 Termite Treatment: Termite treatment in the University based on IS:6313(Part-3)-1981 specification which consists of creating uninterrupted chemical barriers inside and all around the building. The treatment should be drill holes of 6mm as close as possible to the plinth, walls, junctions of the walls at an interval of 6 inches enough to reach the soil below 6 inches deep. Then chemical emulsion should be injected into these holes, which should be subsequently sealed using white cement match with floor colour all complete , The wall should be spray the chemical emulsion up to roof height wherever required complete. 122 SH-VIII Hiring Manpower with fixed remuneration through outsourced agency at CURaj. 123 Service charges per month per person(To be quoted for deciding the lowest responsive bid to award the work)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Rajasthan View Result →
28.
Drinking Water Supply and Sanitation #10288523 Price Bid
Operation And Maintenance Of Community Water Supply Unit And Water Treatment Unit Including Troubleshooting And Supply Of Consumables With Engagement Of Operators And Electrical Supervisors For A Period Of 1 ( One ) Year...
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
29.
Shipping #10277607 Price Bid
Tender For Renovation Of North Wing Of Ship Building Complex.; 1 Providing and fixing temporary fencing using green net in two layers of ht approximately 300-350cms fixed on vertical posts and horrizontal members using pipes /square tubes properly fixed using welding to line and level and fixing green net using GI wire /ties at locations pointed out by the engineer in charge and removal of the same after the completion of work (material shall be taken back after the completion of work ).Rate including costs of all materials, labour etc complete . 2 Demolishing R.C.C / P.C.C work manually / by mechanical means including stacking of steel bars,breaking in to small pieces (approx 15cm) and disposal of unserviceable material within 5km lead as per direction of Engineer-in- Charge, including all labour,other incidentals, hire for tools and plants etc complete. 3 Demolishing brick work/solid block manually / by mechanical means including breaking into small pieces and disposal of unserviceable material within 5km lead as per direction of Engineer-in- Charge, including all labour,other incidentals, hire for tools and plants etc complete. 4 Dismantling and removing tiles setincement mortar in floor including cleaning and stacking, serviceable materials and removing the debris within 5km lead as per direction of Engineer-in- Charge, including all labour,other incidentals, hire for tools and plants etc complete. 5 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish within 5Km lead as per direction of Engineer-in- Charge, including all labour, scaffolding,other incidentals, hire for tools and plants etc complete. 6 Dismantling, removing and loweringwooden frame work, wooden partition, planked sheeting , cladding, or other partitions stacking serviceable materials & removing the unserviceable material within 5km lead asper direction of Engineer-in- Charge, including all labour, scaffolding, other incidentals, hire for tools and plants etc complete. 7 Dismantling AC sheet ceiling including suppports up to height of 5metres including conveying and stacking the dismantled materials at the places pointed out by the Engineer-in-charge. Rateincluding all labour, scaffolding, other incidentals, hire for tools and plants etc complete. 8 Dismantling doors,windows ,ventilator (steel or wood) shutter including chowkhats,architrave,hold fast etc. complete and stacking at the places pointed out by the Engineer-in-charge. 9 Providing Form work,Centering and shuttering including strutting, propping using shuttering sheet,supporting beams, supporting jacks,wooden planks and other incidentals etc. including removal of formwork after completion of work and clearing all materials and cost and conveyance of all materials labour etc 10 Dismantling of flushing cistern of all types (CI/PVC/Vitrious China),wash basin, kitchen sink, urinal pans of all sizes . 11 Dismantling of flushing cistern of all types (CI/PVC/Vitrious China),wash basin, kitchen sink, urinal pans of all sizes . 12 All valves up to 65mm, stop cocks and taps, shower roses, Mirrors, soap trays, towel rods,health fauset of all sizes etc. 13 Dismantling the G.I/PVC pipes of any diameter (with specials and other fittings) from wall/floor including cutting and disposal of dismantled materials at the places pointed out by the Engineer-in-charge. 14 Supplying, fabricating and placing in position steel reinforcement of grade Fe-500D to size and shape including cost and conveyance of all materials, labour for uncoiling, straightening, cutting, bending, binding, lapping or welding etc. complete including cost of reinforcement. (Rate is inclusive of cost of 22g binding wire.) 15 Providing and laying Reinforced cement concrete 1:11/2:3 using 20mm I.S. nominal size hard granite broken stone forthe following items including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing, cost of form work etc. complete, excludingcost and fabrication charges of steel reinforcement etc. 16 Providing and layingcement concrete 1:2:4 using 20mm I.S. nominal size hard granite broken stone including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing etc. complete. 17 Supplying, fabricating and erectingof mild steel tubular (round, square and rectangular hollow tubes) of any size and weight by straightening, cutting and welding using as per approved drawing or as instructed, erecting in position to line and level by welding/bolting embedding in concrete including applying one coat of zinc chromate primer & two coats synthetic enamel paint, hire charges for tools and plants,scaffolding, cost of electrodes, wastage, other incidentals etc. complete all as directed by the Engineer-in- charge. 18 Supplying, Fabrication of all types of structural steel works by straightening,cutting,welding & painting with aluminium paint on all types of steel sections plates,flats of any size and weight as per approved drawing or as instructed,erecting in positionto line and level by welding/bolting embedding in concrete including hire charges for toolsand plants, scaffolding, cost of electrodes, other incidentals etc. complete all as directed by the Engineer-in-charge. 19 Providing and constructing 30x20x15 cm or nearest available size solid concrete block masonry in CM 1:5 in walls of superstructure work , using best quality solid concrete blocks including cost & conveyance of all materials, scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage, return of packings, etc complete as directed by the Engineer - in - charge. 20 Providing and constructing 30x20x10cm solid concrete block masonry in CM 1:5 in walls of superstructure , using best quality solid concrete blocks including cost & conveyance of all materials, scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage,etc complete as directed by the Engineer - in - charge. 21 Providing and laying autoclaved aerated cement blocks masonry with 150mm or nearest available size thick AAC blocks in super structure above plinth levelwith RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). 22 Plastering with CM 1:4, 12mm thick floated hard and trowelled smooth for walls including watering, curing, cost and conveyance of all materials and labour charges ,scaffolding, handling, unloading, finishing,casing made in the wall for electrical / plumbing works other incidentals etc complete. including costs of cement. 23 Painting on walls with two coat ofinterior emulsion paint of premium quality and colour over one coat cement primer after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour,scaffolding other incidentals etc. complete. 24 With one coat of putty 25 Without putty 26 Painting on new wallswith two coats of Premium quality exterior emulsion paint of approved brand and colour over one coat of cement primer after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete. 27 Providing and laying water proofing treatment inbathroom / toilets etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints,corners, junctions of pipes and masonry with polymer mixed slurry. 28 Providing and laying double charge glossy vitrified floor tiles not less than 600 x 600mmsizeof approved make, in all colours and shades, laid on 20mm thick bed of cement mortar 1:3 jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge. (Basic rate of tile = ₹565/m2 excluding GST) 29 Providing and laying approved type Step Tiles(Restile/khajaria or equivalent ) of size 900x300mm or nearest available size as approved by Engineer in Charge, set in CM 1:3 20mm thick and adding necessary cement grout for the proper binding of the tiles to line and level, pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, labour other incidentals etc. complete,including cost of cement. ( basic rate of tile is Rs. 1400/m2 excluding GST) 30 Providing and laying double charge glossy vitrified floor tiles not less than 600 x 600mm sizeof approved make, quality and colourafter clearing the floor properly by pasting with chemical adhesive Cerabond/Myk or equivalent and pointing the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge, including skirting (Basic rate of tile = ₹565/m2 excluding GST) 31 Providing and laying ceramic anti-skid floor tiles not less than 300 x 300mm size of approved make, in all colours and shades, laid on 20mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge. (Basic rate of tile = ₹546/m2 excluding GST) 32 Supplying and laying glossy/matt finished vitrified wall tiles not less than 450 x 300mm size of premium quality of approved make ,quality and colour for dadoing by pasting with chemical adhesive Cerabond, Myk or equivalent and pointing the joints of having joints of 3mm width,using epoxy grout,filling/grouting, finishing, cost and conveyance of all materials labour other incidentals etc. as per the direction of Engineer-in-charge(Basic rate of tile Coloured Tiles Rs. 527/m2 Excl. GST) 33 Providing & installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. Grids width: 24 mm finished in approved shade. The main runners & cross Tees to have stab installation system made of corrosion protected galvanized steel or approved equivalent. Ceiling tiles are tegular edgedCalcium Silicate ceiling tile of size 595x595x15mmtk. GI sections for use as Main Runners are 24 x 38 x 0.30 mm, Cross Tees are 24 x 25 x 0.30 mm, and Wall Angles are 24 x 24 x 0.40 mm and GI supports (GI sections can be changed to higher sections having same or greater thickness to suit the site conditions). False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc.. Rate quoted to include cost and conveyance of all materials, all cut outs required for light fixtures, labour cost, hire charges of equipments, consumables, scaffolding cost, other incidentals etc. complete. 34 Providing and fixing in position half glazed partition using 63.5 x 38.10 x 2mm thick or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8mm or nearest available thick laminated particle board and 5mm thick plain glass fixed with necessary EPDM beading including cost and conveyance of all materials, labour as per direction of Engineer-in- Charge complete. 35 Providing and fixing in position aluminium partition using 63.5x38.10x2mm thk or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8 mm thick laminated particle board fixed with necessary EPDM beading including cost and conveyance of all materials labour etc.complete. 36 Providing and fixing in position powder coated aluminium single leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 47mm x 44mm x 2mm, bottom horizontal member of size 95mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with8mm thick particle board of height 1.2m from bottom frameincluding cost and labour charges for all materialsand fixing etc., complete. The door is to be provided with 1no. door lock,2 nos anodized aluminium handles 150mm or nearest size one on each face ofdoor shutter, 1no of door closer of approved make. 37 Providing and fixing in position powder coated aluminium single leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 47mm x 44mm x 2mm, bottom horizontal member of size 95mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 8mm thick particle board fixed with EPDM beading between panel and aluminium frame on all faces and the powder coated aluminium divider section fixed at the mid height including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock,2 nos anodized aluminium handles 150mm or nearest size one on each face ofdoor shutter, 1no of door closer of approved make. 38 Providing and fixing Aluminium openable ventilatorusing powder coated Aluminium frames of approved quality and shade using 63.5x 38.1x 2mmsizeand shutter frame50x20x1.5mm or nearest available sections aluminium Sections & 4mm thk.Plain glass ,EPDM beading,locking arrangements including cost and conveyance of all materials labour,all other incidentals etc.complete. 39 Providing and fixing in position fully glazedaluminium super sliding window/ventilator with lock system,powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size63.5 x 31.75 x 1.60 mm for frames, 38.10 x19.5 x 1.60mm for shutter interlock, vertical and horizontal and plain glass 4mm thickincluding all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials labour, other incidentalsetc. complete. 40 Supplying and fixing FRP doors with frame work having 1.5mm thick FRP skin moulded with the core material forming a sandwich panel. Necessary wooden supports are to be provided for fixing the accessories such as 100 mm SS hinges 3 nos, 100mm SS tower bolt 1nos, 150mm SS aldrop 1nos, 125mm aluminium handle 2 nos, door stopper, door closers with necessary screws and grips including the cost and conveyance of all materials above mentioned fixtures, labour and all other incidentals etc as per direction of Engineer-in- Charge, including all labour,other incidentals, hire for tools and plants etc. complete. 41 Providing and fixinghigh quality threaded bolts M12x145 mm with nuts & washers to line and level in existing reinforced concrete member using chemical (resin) anchor Systems such as HST-165 of HILTI make or equivalent, including drilling holes of required diameter and depth, injecting the chemical by dispenser, cost of chemical ,scaffolding, all tools and tackles, etc complete as directed by the Engineer -in-charge. 42 Drilling holes for M12 bolt -hole 14mm dia x 100mm deep ,injection of chemical resin and fixing of bolt 43 Supplying and pasting sun control film to the shutter of glazed doors/windows/partitions after cutting to the required size including cost and conveyance of all materials labour other sundaries etc. complete all as directed by the Engineer-in-charge. 44 Providing & fixing in position manually operated Roller Blinds of approved shade and colour with good quality fabric including cost and conveyance of all material all labour,other incidentals etc. complete. 45 Glass Partition :- Supply and installation of full height straight glass partition 12mm thick toughened glass using SS glass patches ofapproved make at bottom and top. The glass to glass joints, glass to wall shall be filled with silicon sealant on both side . Rate shall include for providing transport charges, handling, loading and unloading, Installation, Providing cut out & holes on glass wherever required for the fittings, protecting the module and glass till handing over, testing, commissioning all necessary hardwares, scafolding, wastage etc. complete and all as per manufactures specification as directed Puma / Pekt 46 Providing and fixing 12mm frameless toughened openable pivot glass door with single panel along the glass partition with suitable SS handle, floor spring, and fixing the glass panels firmly using SS 304 grade approved make accessories, polishing all visible edges of the glass perfectly,and providing lock arrangement. Providing cut out & holes on glass wherever required for the fittings, lock, floor spring etc including cost & conveyance of all materials, installation charges etc complete. 47 Supplying, cutting, threading, laying and jointing rigid PVC pipes (Hycount or equivalent) including all specials such as tees, bends, elbows,reducers, plugs, etc. through walls/ concrete, making good the wall/ concrete after fixing using CM 1:3, taking connection from the existing water supply including cost and conveyance of all materials, labour, testing the line before embedding etc. complete excluding specials of 110 mm dia pipes. 48 20mm dia PVC pipe (10kg/cm2) 49 25mm dia (working pressure 10kgf/cm2) 50 32mm dia (working pressure 10kgf/cm2) 51 40 mm dia Pipe (working pressure 10kgf/cm2) 52 50 mm dia Pipe (working pressure 10kgf/cm2) 53 63 mm dia Pipe (working pressure 6kgf/cm2) 54 75 mm dia Pipe (working pressure 6kgf/cm2) 55 110mm dia - 6kgf/cm2 (Specials like bend /reducers / tee etc will be measured separately) 56 Supplying and fixing white European type Water Closetof approved quality at all floors with approved quality high level/low level PVC flushing cistern 10 L or nearest capacity, at all floors including cost of 15mm brass CP angle cock, seat cover, 15mm/20mm P.V.C connection,cost and conveyance of all materials,labour,other incidental charges etc. as directed by the Engineer on charge. etc. complete but excluding cost of cement. 57 Providing and fixing accepted brand of hand wash basin, ceramic type white of size 550x400 or nearest with half pedestal with 15 mm AC type sensor C.P. pillar tap including inlet/outlet fittings, waste coupling, sensor unit, cost &conveyance of all materials,labour for fixing &connecting other incidentals etc complete. 58 Providing and fixing white vitreous urinal basin of acceptable size and brand decided by Engineer Incharge with sensor operated (AC type) flush including cost & conveyance of all materials, installation, labour other incidentals, etc. 59 Supplying and fixing 750 x 320mm size or nearest size porcelin urinal partition of accepted quality, brand,white colour including cost &conveyance of all materials,labour etc complete as directed by the Engineer-in-charge. 60 Supplying and fixing the following water supply fitting(Cera/parryware/equivalent), including cost and conveyance,all labour for fitting,all incidental charges etc. completeall as directed by the Engineer-in-charge. 61 15 mm CP long body tap 62 Brass ball valve 50mm 63 Brass ball valve 40mm 64 40 mm dia Pipe (working pressure 10kgf/cm2) 65 50 mm dia Pipe (working pressure 10kgf/cm2) 66 63 mm dia Pipe (working pressure 6kgf/cm2) 67 75 mm dia Pipe (working pressure 6kgf/cm2) 68 110mm dia - 6kgf/cm2 (Specials like bend /reducers / tee etc will be measured separately) 69 110mm dia - 6kgf/cm2 (Specials like bend /reducers / tee etc will be measured separately) 70 Supplying and fixing following dia. PVC specials (Hycount or equivalent) of approved quality including cost and conveyance of all materials, labour, other incidentals etc.complete. 71 110 mm dia Door T 6 KG 72 110 mm dia Plain bent 6 KG 73 110 mm dia Plain tee 6 KG 74 110x75 Reducer 6 KG 75 110mm dia Y 6 KG 76 Supplying and fixing best quality approved brand PVC vent cowl 110mm dia with mosquito proof net covering at all height including cost and conveyance of all materials, labour, other incidentals etc. complete. 77 Supplying and fixing bevelled edged or plane edged coppered Black Mirror 600x450mmx5.5 thk or nearest available size Indian made glass with plastic sheet at the rear and fixing the same in position with necessary plugs embedded in CM and screwed into with CP fixing screws including cost and conveyance of all materials, labour, other incidentals etc. complete. 78 Supplying and fixing best quality Stainless Steelsoap dish of standardsizeincluding cost and conveyance of all materials, labour, other incidentals, plugs, screws etc. complete. 79 Supplying and fixing C P premium quality Coat Hook specified by engineer in charge, including cost and conveyance of all materials labour etc. complete. 80 Supplying and fixing CP towel rods of 20mm dia of450mm to 600mm long of approved quality, including plugs, screws, embedding the plugs in masonry/concrete in CM all as directed by the Engineer-in-charge. 81 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983with C.I. brackets and stainless steel plug 40 mm, including and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 225 mm 82 Earth work in excavation in all kinds of soils by mechanical means (hydraulic excavator)/manual means lift up to 1.5m including dressing of sides, ramming of bottoms, dewatering, leading water into drains, getting out the excavated soil as directed, within 5km lead and backfilling. 83 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 84 Shifting of following items including careful dismatling,packing,transportationfrom one office to another office at any where in CSL without damaging to the materials/adjoining structures etc at all heights as per the direction of the Engineer-in-charge.(Transportation of files,if any along with the furniture shall be done without any extra cost.All items will be will be packed with protective materials to prevent damage during shifting and appropriate handling equipment will be used for safety .) 85 Shifting of furniture, includes workstation (21 nos),executive tables (39 nos),chairs (112 nos),cupboard (35 nos) ,sofa set (9 nos) ,Teapoy (4 nos) ,rack (15 nos), stools (4 nos )and pantry items. Additionally electronic equipments such as computers,printers,projectors and other miscellaneous office.(Number mentioned are approximate ) 86 Dismantling of optimiser unit without damaging its components(39 unit , 3 bays ) 87 Assembling of old optimiser storageunit properly with safety arrangements and without damage .The optimser storage is placed according to the directions of theEngineer in charge. 88 Supplying and fixing 250mm diaPVC gutter at the eve of roof for collecting rain water including necessary elbow drop,end drop,open nosil, jointer and pathy clamp for holding gutterfixing to line and level cost and conveyance of all materials, labour, scaffolding etc. complete. 89 Supplying and fixingspine and fin based modular workstation of size 1200x600, with partition thickness as 52.4 mmthk and ht - 1200mm including powder coated aluminium trims. FIN:out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with fabric at intermediate level. Top block finished in fabric. Bottom block is finished in metal.Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal.Intermediate blockson main spine Intermediate blocks are given in Fabric finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelaminated particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm dPedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 90 Supplying and fixing panel & tile based modular workstation of size1650x 750D,1200Wx450D with partition thickness as 52.4 mmthk and ht - 1200mm including powder coated aluminium trims.Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal. Intermediate blocks are given in Fabric finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upt the panels through concealed conduits inside the blocks.Modesty panels with assembly leg- 25 MM THK PLB modesty has been given on the front of the main worktop which is attached to the partition on one end with gable end bkts and on the other end with metal powder coated frontier leg.legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface -Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1650 mm w x 750 mm d and ERU table recta of size 1200 mm w x 450 mm d. Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 91 Supplying and fixingpanel & tile based modular workstation of size 1650x600 900x450 with partition thickness as 52.4 mmthk and ht - 1200mm including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal. Intermediate blocks are given in Fabric finsh.Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Modesty panels with assembly leg25 MM THK PLB modesty has been given on the front of the main worktop which is attached to the partition on one end with gable end bkts and on the other end with metal powder coated frontier leg. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface -Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1650 mm w x 600 mm d and ERU table recta of size 900 mm w x 450 mm dPedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 92 Supplying and fixingpanel & tile based modular of size1500W X 750D, Return side - 900W X 450D with partition thickness as 52.4 mmthk and ht - 1200mm including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal. Intermediate blocks are given in Fabric finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Modesty panels with assembly leg - 25 MM THK PLB modesty has been given on the front of the main worktop which is attached to the partition on one end with gable end bkts and on the other end with metal powder coated frontier leg. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface -Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w x 750 mm d and ERU table recta of size 900 mm w x 450 mm d.Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1fileCPU trolley - with castorsKBPT with mousetray - Metal 93 Supplying and fixingdesk based modular workstationof size 2100W X 900D, Return side - 1200W X 600D with System ht - 750 mm.LEGS: Providing metal powder coated leg . Legs are for standard workstation height of 750mm Understructure Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop.wire managementFor 750 high - Standalone power box with wire riser have been considered. Access flapcover will be provided. Switch plate of (8+3 ) module is considered for Power and Data points. Metal modesty: Lazer cut perforated Metal modesty.Metal modesty are mounted on the worktop with the help of the modesty mounting bracketsModesty terminates at 400 mm from ground .WORKSURFACE - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 2100 mm w x 900 mm d for Main table, 1200 mm w x 600 mm d for Return unit.Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 94 Supplying and fixingdesk based modular workstation of size 1800W X 750D, Return side - 1200W X 600D with System ht - 750 mm.Providing metal powder coatedleg . Legs are for standard workstation height of 750mm.understructure : Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop.Wire management For 750 high - Standalone power box with wire riser have been considered. Access flapcover will be provided. Switch plate of (8+3 ) module is considered for Power and Data points. Metal modesty: Lazer cut perforated Metal modesty,these are mounted on the worktop with the help of the modesty mounting brackets .Modesty terminates at 400 mm from ground.WORKSURFACE - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size1800W X 750D, Return side - 1200W X 600DPedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal 95 Supplying and fixing conference tables of size 2100W X 900Dwithworktop ht - 750 mm. Legs has inclination in one plane. Leg has an extrusion cover made of Aluminum alloy which can have different color.Wire Management Single Power box (8M+3M & 8M+3M )with raiser and Soft closing dual access flap with brush. Worktop deatils 25mm thick prelaminated partical board with pvc lipping. 96 Supplying and fixingof Storage unit: MetalDoor with CAM Lock for 1200W* 1950H Product Size - 2 Doors (LH and RH) for 1200WFor 1200W storage-Each Door width 598W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision, Click action mechanism. ,Key removable in locked and unlocked positions.Zinc alloy die cast housing. Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)Each shelf has max Load Capacity of 80kg UDL for 1200W unit5 Nos. of fixed shelves for 2325(H)A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). 97 Supplying and fixingstorage unit of size 1200Wx470Dx1200H .Height including leveler height with zero position2. Top panels and end cover panels are to be booked separately CONSTRUCTION AND MATERIAL :-1)Aesthetically appealing completely knock down construction.2)Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mmCRCA), Back panel(0.5mm for 750mm and 900width Storage Units and 1.2mmCRCA for 600mm and 1200width Storage Units to avoid toppling of unit in caseof Glass door unit and single door unit), Top Bottom stiffener(1.2mm CRCA) andEnd Cover(0.6mm CRCA). CRCA D Grade as per IS-513.All metal panels are coated with Epoxy polyster powder of 50±10 micronsthickness.TOP OPTIONSFor top panel two options available1)Metal Top Panel (0.6mm CRCA) bent panel which is powder coated with Epoxypolyster powder of 50±10 microns thickness.2)Wood Top Panel (Made of 25mm thick pre-laminate board (PLB) conformingto IS-14587:1998, Edge banded with matching 2 mm thick PVC lipping ) SHELVING1)Fixed shelves made up of 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)2)1 No. fixed shelf for 750mm height and 2NO. Fixed shelf for other remaining heights3)A4 size box file (85Wx345Hx285D) can be stored vertically.4)Number of files that can be stored per shelf is : For width 1200w - 13 Nos.5)Each shelf has max Load Capacity of -74kg UDL for 1200W unit LEVELLER- Metal base plate (1.6mm CRCA) with Screw type adjustable leveler with plasticbase provides vertical adjustment for floor unevenness and leveling of units.- Height of Leveller is 50mm and 25mm Leveller adjustment available HINGE COVER CAPMetal diecasted cap powder coated with Epoxy polyster powder of 50±10 microns thickness to cover the hinge holes with plastic expandable socket for open shelf unit only NAME TAG STICKER 120mmx 18mm Shelf Sticker Made up of material polyester and adhesive TESA4965 on the left side of shelves. METAL DOOR- SIZE: Door Width (DW) - 373mm /448mm /598mmDoor Height (DH) - 663mm /963mm /1128mm /1280mmDepth - 18mmRemarks: 2 Doors (LH and RH) for 1200mm Width Storage Unit Door Width (DW):-For 600mm Width and 1200mm Width storage Unit - Each Door width is 598 mm (Double Shutter - 1LH and 1RH)Door Height (DH) :For 1200mm/1215mm Height storage Unit -Each Door Height is1128mm.CONSTRUCTION AND MATERIAL:1.Made from 0.6mm Thick CRCA with 0.5mm Thick CRCA Stiffner (*CRCA D Grade, IS-513)2.Soft closing Hinges Available with 105° door opening angle3.All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness.4.Inbuilt HandleLOCKING DETAILS: Cam Lock-3 Way locking provision.-Click action mechanism.-Key removable in locked and unlocked positions.-Zinc alloy die cast housing.NAME TAG STICKER: 120mmx 18mm Shelf Sticker Made up of material polyester and adhesive TESA4965 on the door at left top corner 98 Providing and fixingstorage unit withglass door of size 900Wx470Dx1200H .Height including leveler Height with zero position .Aesthetically appealing completely knock down construction.Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mmCRCA), Back panel(0.5mm for900mm width Storage Units ), Top Bottom stiffener(1.2mm CRCA) andEnd Cover(0.6mm CRCA). CRCA D Grade as per IS-513 3)All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness. 1)Metal Top Panel (0.6mm CRCA) bent panel which is powder coated with Epoxypolyster powder of 50±10 microns thickness. SHELVING 1)Fixed shelves made up of 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)2)2NO. Fixed shelf for other remaining heights 3)A4 size box file (85Wx345Hx285D) can be stored vertically. LEVELLER- Metal base plate (1.6mm CRCA) with Screw type adjustable leveler with plasticbase provides vertical adjustment for floor unevenness and leveling of units. Height of Leveller is 50mm and 25mm Leveller adjustment available HINGE COVER CAP Metal diecasted cap powder coated with Epoxy polyster powder of 50±10 microns thickness to cover the hinge holes with plastic expandable socket for open shelf unit only . 120mmx 18mm Shelf Sticker Made up of material polyester and adhesive TESA4965 on the left side of shelves. GLASS DOOR- SIZE: Door Width (DW) -448mm Door Height (DH) - 1128mm 99 GM Cabin : High back chairSupplying of High back chair of make Godrej,wipro,featherlite,DamroSeat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leatheretteand moulded polyurethane foam. The back shall be designed with contoured shape for extra comfort and made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and 37mm thick, 32 Density U foam. Size of back shall be (W)-55.0cm, (H)-70.5 .0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. PU foam should be used in making seat which shall be moulded with density 55 +/- 5 kg/m ³ and hardness load 15-20 kgf for 50% compression.The armrests should made of black integral skin polyurethane with 50-70 shore A Hardness and reinforced with M.S insert. . The 2D armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of HR steel.The mechanism of chair shall have following features:360 degree revolving type, AWS mechanism with seat slide ,multi lockingfor better comfort. The chair shall be provided with pneumatic height adjustment CLASS 4which shall have stroke of 12 cm.The pedestal shall be made of die-cast polished aluminium . It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black PU or nylon . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Heightfrom ground - min 115.5 to max 127.5 cm. Seat height - min 43.0cm to max 55 cm.Dimensions tolerance / variations shall be within +/- 1 cm. 100 GM Cabin: Three seater sofa Supplying and installing of Three seater sofa of makeGodrej,wipro,featherlite,Damro. The seat , armrest & backrest assembly shall consists of a Pine/meranti understructure with plywood frame consisting layers of foam with wadding. The complete assembly shall be covered with Leatherette /Fabricupholstery .seat and back consists of a fabricated inner-frame hardboard assembly with layers ofPU foam thickness of 10 cm and density of 30 kg/sq.m. leg is MS metal legsheight of 149 mm with nylon bush.Seat depthis 60.8cm, Overall Dimensions of sofa shall beHeight - 85 cm,Total length - 198.2 cm. Dimensions tolerance / variations shall be within +/- 1 cm. 101 DGM Cabin & AGM Cabin : Executive High back Providing and placingExecutive high back chair of make Godrej,wipro,featherlite,Damro.The seat shall made up of plywood and moulded polyurethane foam upholstered with fabric. Backrest assembly is of injection moulded plastic with black mesh fabric and height adjustable lumbar support pad , adjustable head rest assembly. The moulded polyurethane foam for seat is with density=50+/-2kg/m ³. The dimensions of seat shall be- 48 cm(W) x 45 cm(D) and of back shall be 46.5 cm(W) x 51.5 cm(H). Armrest 4 way button operated height adjustment(2D). The arm top is made of soft moulded PU. The mechanism of chair shall have following features:360 degree revolving type, Automatic weight sensing Mechanism with multi lock.The chair shall be provided with pneumatic height adjustment (CLASS 4 )which shall have stroke of 11.2 +/- 0.5 cm.The pedestal shall be injection moulded in black plastic GF nylon and fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The cushioned head support is adjustable in height and angle for optimum user comfort. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Heightfrom ground - min 92.5 to max 103.0 cm. Seat height - min 41 cm to max 51.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. 102 DGM Cabin : Sofa Two seater Providing and placing Two seater sofa of make Godrej,wipro,featherlite,Damro .The seat , armrest & backrest assembly shall consists of a Pine understructure with plywood frame consisting layers of foam with wadding. The complete assembly shall be covered with Leatherette upholstery . The size of seat shall be: 55.0cm. (W) X 55.0cm. (D) X 22.0cm. (T) Approx. The size of back shall be:55.0cm(W) X 35.0cm. (H) X 22.0cm. (T) Approx.Elastic Webbing is used to give a soft contour to the seat . It consists of a fabricated inner-frame hardboard assembly with layers of foam. The hardness of the P.U. foam= 16-20 Kgs. on Hampden m/c for 25% compression of the foam. The rectangular leg is made of wood and 4 tier packing is used to minimize damage & reduce wastage. Overall Dimensions of Chair shall be Seat Width - 54.5 cm, Height - 82 cm, Total width - 91 cm, Total length - 151 cm. Dimensions tolerance / variations shall be within +/- 1 cm. 103 SM/AM/PO/Chairs : Executive medium back Providing and placingExecutive medium back chair OF MAKE Godrej,wipro,featherlite,Damro.The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly.Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 16 cm (W) x 9 cm (H) at fixed position Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. 2D Armrest has height adjustment . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment,position tilt limiter with Back-safety return feature. The chair shall be provided with class 4 pneumatic height adjustmentwhich shall have stroke of 95 +/- 5 mm.The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Heightfrom ground - min 102.5 to max 111.5 cm. Seat height - min 44.5 cm to max 53.5 cm.Dimensions tolerance / variations shall be within +/- 1 cm. 104 Visitor chairs: Providing and placingvisitors chair Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. . The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 160mm (W) x 90mm (H) at fixed position Armrest is fixed armrest .The visitor base is cantilever type. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Heightfrom ground - min 102.5 cm. Seat height - min 44.5 cm.Dimensions tolerance / variations shall be within +/- 1 cm. 105 CA/Attender/os/pa chair: Providing and placingchair size of back shall be (W)-45 cm, (H)-55 cm & size of seat shall be (W)-49 cm x (D)-50.0cm of makeGodrej,wipro,featherlite,Damro. The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. . Armrest has 1D height adjustment . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro1 mechanism, Tilt tension adjustment, tilt limiter with Back-safety return feature. The chair shall be provided with Class 4 pneumatic height adjustment which shall have stroke of 95 +/- 5 mm.The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 63.0cm, Depth of Chair - 67.0 cm . Heightfrom groundmaximum 110.5 cm. Seat height - min 45.0cm to max 55.0cm.Dimensions tolerance / variations shall be within +/- 1 cm. 106 Tender opening room chairs:Providing and placing of chairs of makeGodrej,wipro,featherlite,Damro. The seat and back shall be injection moulded in Polypropylene. They shall be fitted on the understructure assembly and shall be fixed with screws.. Approximate Back Size shall be: 42.0cm. (W) X 38.5 cm. (H). and Approximate Seat Size shall be: 46 cm. (W) X 39.5 cm. (D). The understructure assembly shall bemade of MSERW PIPE PIPE:Dia 19x1.6 and silver powder coated ( DFT 40-60 microns ). Overall Dimensions of Chair shall be Seat Height - 46.5 cm, Height - 83.0cm, Width & Depth of Chair as measured from base - Width-42.0cm and Depth-46 cm. Dimensions tolerance / variations shall be within +/- 1 cm. 107 Suppling and fixing 8mm plain glass with edge rounded for table top. 108 Supply of 600X600 mm, 230VAC, 1Ø, LED light fitting with supporting brackets and chain as required. 34-36W 109 Supply of 230VAC, 1Ø, 12-15 Watts LED modularrecess Down light fitting with supporting bracket/chain complete accessories as required 110 Supply of 230VAC, 1Ø, 6-10 Watts LED modularrecessDown light fitting with supporting bracket/chain complete accessories as required 111 Supply of 18W, 1700- 2100 lumen output, 230V AC,50 Hz, 18-20W 18-20W 4F/1200mm length, T5 LED tube integral light fittings . 112 Supply ofBLDC wall fan ,400 mm sweep,230 V AC 113 Supply of LUKERLED mirror light fitting 12 Watts with supporting bracket as required. 114 Supply of Ceiling fan BLDC, 230V, 50Hz, 5 star rating1200 mm sweep 115 Supply of Ceiling fan BLDC, 230V, 50Hz, 900 mm sweep 116 Supplyof exhaust fan shutter type,200mm sweep, 230V, 50HZ,30-40W, 1300 rpm, 500 CMM, 30-40db noise level, automatic shutter 117 Supply of suitable size PVC/GI modular boxwith modular plate, cover, providing and fixing one number of 3 pin 5/6 A modular socket outlet (2M) and one number of 5/6 A modular switch (1M), including providing connections etc. as required. (3M) 118 supplyofsuitable size Gl/PVC box with modular plate, cover, providng and fixing 3 Nos. 3 pin 5/6 A modular socket outlets (2M) and 2 Nos. 5/6 A modular switches (1M) including providing connection etc. as required - Computer point (8M) 119 Supplying of Concealed Mode PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) and one number of 15/16 A modular switch (1M). (3M) 120 Supplying of Concealed Mode PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) for Split AC. 121 Supply of 8 way (MCCB +3 x 8)(VTPN) , sheet steel, 415 V, MCB double door distribution board on concealed mode, 122 Supplying cable end box (IP 43) suitable for three phase and neutral, Vertical (VTPN) MCB DB 123 Supplyof 8 way (8+ 18 ) horizontal type three pole and neutral (TPN) on surface/on concealed mode, 124 Supply of9 ModuleIP 65 Hensel Box 125 supply 160A, 25 kA rating and breaking capacity 4 Pole MCCB with Thermal magneti 126 Supply of Three pole 63A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 127 Supply of Three pole 40A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 128 Supply of four pole 40A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 129 Supply of four pole (three phase and neutral),40 A,415V, RCCB, having a sensitivity current of 30mA 130 Supply of four pole (three phase and neutral),63 A,415V, RCCB, having a sensitivity current of 100mA 131 Supply of Single pole 16/20/25A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 132 Supply of single pole 6/10A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 133 Supply of single pole blanking plate in the existing MCB DB/Modular switch board complete etc. as required. 134 Supply of one run Aluminium Conductor 4 core X70 Sq.mm A2XFY Insulated, 135 Supply of one run Aluminium Conductor 4 core X 16 Sq.mm A2XFY Insulated, 136 Supply of one run Aluminium Conductor 4 core X 10 Sq.mm A2XFY Insulated, 137 Supplyof 10 SWG Copper wireconductorfor earthing 138 Supply of12 SWG Copper wireconductorfor earthing 139 Supply of compression gland andHeavy duty Aluminium long barrel lugs for 4 X 70 sq. mm 140 Supply of compression gland andHeavy duty Aluminium long barrel lugsfor 4 X 16 sq. mm 141 Supply of compression gland and Heavy duty Aluminium long barrel lugs for 4 X 10 sq. mm 142 wiring oflight point/ fan point/ exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated, 650V, 143 Wiring of circuit/ submain wiring alongwith earth wire 2x1.5 sq.mm + 1x1.5 sq.mm earth 144 Wiring of circuit/ submain wiring alongwith earth wire 2x2.5 sq.mm + 1x2.5 sq.mm earth 145 Supply ofPIR Motion Sensor 146 Supplyofextradown rod of 19 mm dia heavy gauge including painting etc required for ceiling fan 147 Supply of100 mm Width x 50 mmdepth x 1.6 mm Thickness perforated painted with powder coating MS cable tray 148 Installation of600X600 mm, 230VAC, 1Ø, LED light fitting with supporting brackets and chain as required. 34-36W 149 Installationof 230VAC, 1Ø, 12-15 Watts LED modular recess Down light fitting with supporting bracket/chain complete accessories as required 150 Installationof 230VAC, 1Ø, 6-10 Watts LED modular recess Down light fitting with supporting bracket/chain complete accessories as required 151 Installationof 18W, 1700- 2100 lumen output, 230V AC,50 Hz, 18-20W 18-20W 4F/1200mm length, T5 LED tube integral light fittings . 152 InstallationofBLDCwall fan ,400 mm sweep,230 v AC 153 Installation of LED mirror light fitting with supporting bracket as required. 154 Installation of Ceiling fan BLDC, 230V, 50Hz, 5 star rating1200 mm sweep 155 Installation of Ceiling fan BLDC, 230V, 50Hz, 5 star rating900 mm sweep 156 Installation of exhaust fan shutter type, 230V, 50HZ, 30-40W, 1300 rpm, 200 mm sweep , 30-40db noise level, automatic shutter 157 Installationsuitable size PVC/GI modular boxwith modular plate, cover, providing and fixing one number of 3 pin 5/6 A modular socket outlet (2M) and one number of 5/6 A modular switch (1M), including providing connections etc. as required. 158 Installation ofsuitable size Gl/PVC box with modular plate, cover, providng and fixing 3 Nos. 3 pin 5/6 A modular socket outlets (2M) and 2 Nos. 5/6 A modular switches (1M) including providing connection etc. as required - Computer point (8M) 159 Installationof Concealed ModePVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) and one number of 15/16 A modular switch (1M). (3M) 160 Installationof Concealed Mode PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M). 161 Installation of 8 way (MCCB +3 x 8)(VTPN) , sheet steel, 415 V, MCB double door distribution board on concealed mode, 162 Fixingcable end box (IP 43) suitable for three phase and neutral, Vertical (VTPN) MCB DB 163 Installation of 8 way (8+ 18 ) horizontal type three pole and neutral (TPN) on surface/on concealed mode, 164 Installation of8 way HENSEL BOX 165 Installation of 160A, 25 kA rating and breaking capacity 4 Pole MCCB with Thermal magnetic 166 Installation of Three pole 63A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 167 Installation of Three pole 40A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 168 Installationof four pole 40A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 169 Installationof four pole (three phase and neutral),40 A,415V, RCCB, having a sensitivity current of 30mA 170 Installation of four pole (three phase and neutral),63 A,415V, RCCB, having a sensitivity current of 100mA 171 Installation of Single pole 16/20/25A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 172 Installation of single pole 6/10A rating, 240/ 415 V, 10 kA, C curve, miniature circuit breaker 173 Installation of single pole blanking plate in the existing MCB DB /Modular switch board complete etc. as required. 174 Installation of one run Aluminium Conductor 4 core X70 Sq.mm A2XFY Insulated, On wall 175 Installationof one run Aluminium Conductor 4 core X 16 Sq.mm A2XFY Insulated, 176 Installationof one run Aluminium Conductor 4 core X 10 Sq.mm A2XFY Insulated, 177 Laying 10 SWG Copper wireconductorfor earthing 178 Laying 12 SWG Copper wireconductorfor earthing 179 Installation of compression gland andHeavy duty Aluminium long barrel lugs for 4 X 70 sq. mm 180 Installationof compression gland andHeavy duty Aluminium long barrel lugsfor 4 X 16 sq. mm 181 Installation of compression gland and Heavy duty Aluminium long barrel lugs for 4 X 10 sq. mm 182 Installation of light point/ fan point/ exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated, 650V 183 Installation ofcircuit/ submain wiring alongwith earth wire 2x1.5 sq.mm + 1x1.5 sq.mm earth 184 Installation of circuit/ submain wiring alongwith earth wire 2x2.5 sq.mm + 1x2.5 sq.mm earth 185 Installation ofPIR Motion Sensor 186 Installation ofextradown rod of 19 mm dia heavy gauge including painting etc required for ceiling fan 187 Installation of 100 mm Width x 50 mmdepth x 1.6 mmThickness perforated painted with powder coating MS cable tray 188 Dismantling of existing switch boards,lights , fans, disconection of all cableswith all accessories and transporting to site specified by engineer in charge. 189 Supply,Installation, termination, testing andcommissioningof Back box complete with all respects Complying with relevant standard specification, as directed by the Engineer-in-charge.Acceptable Make :Legrand/Schneider/Substantially equivalent 190 Supply, Installation, termination,testing and commissioning modular of Single Port Faceplate for CAT3rate shall be include nessary accessories like screw, proper labelling with color code, etc ., as complete with all respects complying with relevant standard specification, as directed by the Engineer-incharge.Acceptable Make :Legrand/Schneider/Substantially equivalent 191 Supply, Installation, termination,testing and commissioning of RJ11 Outlet with all accessories as requiredin complete as per specification.Acceptable Make :Legrand/Schneider/Substantially equivalent 192 Supplying and laying of2 pair 0.5mm dia FR PVC insulated anealed copper conductor, unarmoured telephone cable throughexisting surface/through wall/through floor, through concealed PVC conduit as per site conditionAcceptable Make: Havells/ Polycab/ Finolex/ Substantially equivalent 193 Supply and laying of10 pair 0.5mm dia FR PVC insulated anealed copper conductor, unarmoured telephone cable throughexisting surface/through wall/through floor, through concealed PVC conduit as per site conditionAcceptable Make :Havells/ Polycab/ Finolex/Substantially equivalent. 194 Supply and laying of20 pair 0.5mm dia FR PVC insulated anealed copper conductor, unarmoured telephone cable throughexisting surface/through wall/through floor, through concealed PVC conduit as per site condition Acceptable Make :Havells/ Polycab/ Finolex /Substantially equivalent. 195 Supply, installation, termination, testing and commissioning of 20 Pair MDF Box with Krone Modules with all accessoriesper site conditionAcceptable Make :ADC-Krone/Bestnet/Substantially equivalent 196 Supply, Installation, termination, Testing andCommissioning of One Plus One Phone(Boss-Secretary Type Phone),2 Base Unit, 2 Handset,2 no of six point Rosette Box, 2 Data Cord,Line Cord,Power AdapterAcceptable Make: Beetel M78/Substantially equivalent 197 Supply, Installation, termination, Testing and Commissioning of Analogue phones with LCD display, caller id and 5 station redial memory. Acceptable Make :Panasonic KX-TSC62SX/Substantially equivalent 198 Supply, Installation, termination,Testing andCommissioning of Analogue phones.Acceptable Make :Panasonic KXTS400SX/Substantially equivalent 199 Supply, laying and fixing of 20mm size PVC conduit along with accessories in surface/ recess concealed manner including cutting the wall/floor and making good the same in case of recessed conduit as required.Reputed Make 200 Supply of Aircooled VRF ODU-44 HP Module. The outdoor units shall be capable to provide project capacity as specified in scope of work and Technical specification using combinations of twounits only. 201 22 HP OUTDOOR UNIT 202 Supply of VRF Cassette type Indoor Units:The minimum capacity to be supplied asmentioned below: 203 1.0 TR 1 Way Cassette with wireless remote and panel 204 4.0 TR 4 Way Cassette with wireless remote 205 Supply of VRF Wall mounted unit Indoor Units:The minimum capacity to be supplied as mentioned below: 206 0.6 TR Hi wall 207 0.8 TR Hi wall 208 1.0 TR Hi wall 209 1.3 TR Hi wall 210 1.6TR Hi wall 211 Supply of Y-Joints/ T joints/ Header Joints as per the layout.Make as per equipment manufacturer 212 Outdoor connection kit 213 Y-Joints 214 INSTALLATION,TESTING ,COMMISSIONING AND HANDING OVER OF VRF UNITS 215 22HP OUTDOOR UNIT 216 1.0 TR 1 Way Cassette 217 4.0 TR 4 Way Cassette 218 0.6 TR Hi wall 219 0.8 TR Hi wall 220 1.0 TR Hi wall 221 1.3 TR Hi wall 222 1.6TR Hi wall 223 Installation ,testing & commissioning of Y-Joints/ T joints/ Header Joints as per the layout. Make as per equipment manufacturer 224 Outdoor connection kit 225 Y-Joints 226 REFRIGERANT PIPING 227 Outdoor connection kit 228 perforated cable tray with cover 1.2 mm thick 100/150 mm width 229 CONTROL CABLINGSupply, Installation, testing and commissioning of cu. cable for control cum trans-mission between Indoor unit and Out Door Unit through PVC Conduit.Make : Havells, Finolex, RR, equivalent 230 1.5 sq.mm,3 core 231 CONDENSATE DRAIN PIPINGSupply and fixing in position of condensate drain water & indoor unit drain to the drain point indicated by plumbing department. Piping with 10 mm thk Closed Cell insulation, stuck with approved adhesive compound and with necessary fittings like elbows, tees and reducers etc.Make : Finolex, Supreme, any equivalent 232 UPVC or PVC pipe with 10 mm thk Closed Cell insulation. 233 REFREGERANT GAS 234 Supply, Filling, testing, commissioning including topping up of R410 A Refrigerant. 235 LOADING / UNLOADING 236 Lifting, shifting & positioning of VRF Condensing unit on ODU Platform. 237 Vibration Isolator pad for mounting the Condensing unit on the MS Structure 238 MODULAR TYPE OUTDOOR SUPPORT
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Kerala View Result →
30.
Public Administrative Department #10275800 Price Bid
Spares And Consumable Item Supply Of Spares And Consumable Item For 50 Mld Water Treatment Plant At Site Manubhan Tekri Wtp And Karbala Raw Water Pump House, Bhopal , Supply Of 320 No. Lubrication Oil For Gear Box Make:-H.P/Shell/Castrol , Supply Of 90 No. Lubrication Oil For Blower Pump Make:-H.P/Shell/Castrol , Supply Of 46 No Lubrication Oil For Vt Pump Make:-H.P/Shell/Castrol , Supply Of Wd-40 Multi Purpose Cleaning Spray For Breaker Maintenance Make:-Pidilite/Drfixit/Rustoline , Supply Of Belt For Air Blower C2220/C85 Make:-Fanner/Pix , Supply Of Bearing 6006 2Rs , Supply Of Check Valve (Nrv W/Out Flange) For Backwash Pump Make:-Skf/Fag/Nbc , Supply Of Lubricated Pressure Gauge For Raw Water Pump 4/6 Inch Dail Size Connection Size 15 Mm Make:-Guru/Baumer/Mano , Supply Of Oil Seal For Gear Box Size 35X47x7 Mm Make:-Skf/Fag/Nbc , Supply Of Oil Seal For Gear Box Size 25X52x7 Mm Make:-Skf/Fag/Nbc , Supply Of Bearing For Vt Pump 29324-E1-Xl Make:-Skf/Fag/Nbc , Supply Of Bearing For Vt Pump Motor Non Drive End 6224-C3 Make:-Skf/Fag/Nbc , Supply Of Bearing For Vt Pump Motor Drive End 7320 Becbm Make:-Skf/Fag/Nbc , Supply Of Bearing For Blower Motor 6310-Zz Make:-Skf/Fag/Nbc , Supply Of Bearing For Blower Motor 6210-Zz Make:-Skf/Fag/Nbc , Supply Of Bearing For Gear Motor 6203-Zz Make:-Skf/Fag/Nbc , Supply Of Bearing For Flash Mixture Gear Box 33112 Make:-Skf/Fag/Nbc , Supply Of Bearing For Back Wash Pump Motor 6309-Zz Make:-Skf/Fag/Nbc , Supply Of Bearing For Back Wash Pump Motor 6209-Zz Make:-Skf/Fag/Nbc , Supply Of Helical Gear Box/Gear Head For Alum Floculator Ibcm128/818-2/200-24 Sf 1 Tourqe 174Nm Make:- Premium Transmission/Greaves And Redicon , Supply Of Square Shape Gland Rope 20 Mm Graphite Gland Packing Rope Reinforcement With Synthethic Fiber, Make :- Champion/Pacman/Sigma/Turner
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Madhya Pradesh View Result →
31.
Public Administrative Department #10259911 Price Bid
Improvements of Water Supply System in Thiruporur Town Panchayat- 1 Supply,delivery of DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K7 for potable water supply as per IS specification no. 8329 /2000 and as amended from time to time with ISI marking of the following sizes and for delivery at site including loading, unloading, freight stacking, conveyance to the work site etc., complete as directed by the Engineer-incharge 250mm DI S/S K7 Class Pipe 2 300mm DI S/S K7 Class Pipe 3 350mm DI S/S K7 Class Pipe 4 Supply, delivery of Ductile Iron Specials As Per IS 9523/2000includingunloading, transportation and stacking charges, conveyance to work site etc., complete as directed by the Engineer in charge. DI D/S Specials (250 mm to 300 mm) 5 DI D/S Specials (350 mm to 450 mm) 6 Supply of the following UPVC 6 KSC pipes and specials as per IS specifications for Cable complete as directed by the Engineer in charge. 50 MM UPVC 6 KSC pipe (Power Cable Cover Pipe) 7 Supplying and conveying to site, the following sizes of HDPE pipes of class PN10 (PE-100) confirming to IS:4984/1995, as specified in Technical specifications in standard lengths including labour charges for loading, unloading and stacking at site and transportation charges etc., complete as per standard specifications and as directed by the Engineer in Charge.110mm HDPE PN10 Class Pipe 8 200mm HDPE PN10 Class Pipe 9 Supply, delivery of HDPE Specials As Per IS 1736-1995includingunloading, transportation and stacking charges. Specials for HDPE pipes as per IS 8360/1977/ Part I(Reaffirmed 1992) Part II and III (Reaffirmed 2002). Reaffirmed to IS 4984-2016 conveyance to work site etc., complete as directed by the Engineer in charge. HDPEBends - 90° - PN10 Class 110mm 10 HDPEBends - 90° - PN10 Class - 200mm 11 HDPE Equal Tee - PN10 Class - 110mm x 110mm x 110mm 12 HDPE Equal Tee - PN10 Class 200mm x 200mm x 200mm 13 HDPE PN10 Class Reducer - 200mm x 110mm HDPE Reducer 14 DI D/F Gate Valves with Specials: Supply and Delivery of DI D/F Gate valves (Soft Seated) resilient seated softsealing gate valves (sluice valves) with body bonnet of ductile cast iron of gradeGGG40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindlenut, without gland packing and with 3 O-Ring protection on the shaft and seals ofNBR and the valves should be of vaccum tight and 100% leak proof with face toface dimentions as EPR BS 5163-89/ ISI 14846-2000/ DIN 3202 F 4. All the valvesshould be with electrostatic powder coating both inside and outside with pocketless straight thro body passage. All the valves are to be compatible for burriedapplication with pressure rating PN 10/16 and Supply, delivery of Ductile Iron Specials as Per IS 9523/2000including unloading, transportation and stacking charges for fixing of valves with specials including labour charges for lowering, laying,jointing etc complete as directed by Engineer in Charge100 mm DI D/F Gate Valve PN 16 in 100mm DI main with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below100 mm DI D/F Gate Valve PN 16 - 1 No 100 D.I.Flg /skt T.P. - 1 No100 D.I.Flg /spgt T.P. - 1 No Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 Nos – 100mmJointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos- 100 mm 15 200 mm DI D/F Gate Valve PN 16 in 200mm DI main with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below 200 mm DI D/F Gate Valve PN 16 - 1 No 200 D.I.Flg /skt T.P. - 1 No 200 D.I.Flg /spgt T.P. - 1 No Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 Nos - 200 mm Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos - 200 mm 16 250 mm DI D/F Gate Valve PN 16 in 250mm DI main with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below 250 mm DI D/F Gate Valve PN 16 - 1 No 250 D.I.Flg /skt T.P. - 1 No 250 D.I.Flg /spgt T.P. - 1 No Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 Nos - 250 mm Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos -250 mm 17 300 mm DI D/F Gate Valve PN 16in 300mm DI main with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below300 mm DI D/F Gate Valve PN 16 - 1 No - 300 mm DI.Flgd Spgt T.P.-1No 300 mm DI.Flgd Skt T.P.-1No Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 Nos - 300 mm Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos -300 mm. 18 For Pumping Main - Gate Valve with Specials - Scour 80 mm DI D/F Gate valve for Scour in 100 mm DI main with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below100 x 100 x 80 mm D.I. D/S B/F Tee - 1 No 80 mm x 2.50 m D.I. D/F- 1 No 80 mm x 1.0 m D.I. D/F Pipe - 2 Nos 80 mm DI D/F Gate Valve - 1 No. 80 mm D.I. D/f DFoot bend - 1 No 80 mm DI D/F 90˚ Bend - 2 No Surface box - 1 No. Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 8 Nos - 80 mm Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos - 100 mm 80 mm DI Flanged / SPKT TP - 1 No Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 1 No - 80 mm 19 100 mm DI D/F Gate valve forScour in 200 mm DI main with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below 100 x 100 x 80 mm D.I. D/S B/F Tee - 1 No 80 mm x 2.50 m D.I. D/F- 1 No, 80 mm x 1.0 m D.I. D/F Pipe - 2 Nos, 80 mm DI D/F Gate Valve - 1 No., 80 mm D.I. D/f DFoot bend - 1 No 80 mm DI D/F 90˚ Bend - 2 NoJointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 8 Nos - 80 mmJointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos - 100 mm 80 mm DI Flanged / SPKT TP - 1 No Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 1 No - 80 mm 20 150 mm DI D/F Gate valve for Scour in 250 mm DI main with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below250x 250 x150 mm D.I D/S B/F Tee - 1 No 150 mm x 2.50 m DI D/F Pipe.- 1 No 150 mm x 1.00 m DI D/F Pipe - 2 Nos 150 mm DI D/F Gate Valve - 1 No 150 mm DI D/F DFoot bend - 1 No 150 mm x 1.50 m DI D/F Pipe - 1 No 150 mm DI D/F 90˚ Bend - 2 No (1 No. - 21 kg) C.I Surface box - 1 No Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 8 Nos - 150 mm Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos-150mm dia 21 200 mm DI D/F Gate Valve for Scour in 300 mm DI main with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below300x 300 x200 mm D.I. D/S B/F Tee - 1 No. 200 mm x 2.5 m D.I. D/F Pipe.- 1 No. 200 mm x 1.00 m D.I. D/F Pipe - 2 Nos, 200 mm DI D/F GateValve - 1 No, 200 mm D.I. D/F DFoot bend - 1 No, 200 mm D.I DI D/F 90˚ Bend - 2 No, C.I Surface box - 1 No,Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 7 Nos - 200 mmJointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 1 No -200mm, Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos. 22 300mm For Pumping Main - Air Valve with Specials Manufacture, Supply and Delivery of Tamper proof DI single chamber double orifice, triple function (ventilating, admitting and venting during operation) air release valves with pressure range from PN 1.0 to 2.5 with body and cover made of Ductile Iron of Grade GGG 40 or equivalent grade conforming to IS 1865 with Food Grade Epoxy Powder coating(EP-P) inside and for outside of colour blue RAL 5005. All internal parts such as float, shell etc., cover bolts, made of Austenitic alloy steel of SS AISI 304/316. The float shall be made of Polytetrafluroethylene/ Austenitic alloy steel of AISI 304/316. Gaskets and seals of EPDM / Neoprene rubber for TWAD Board works anywhere in Tamil Nadu includingunloading, transportation and stacking charges.Supply, delivery of Ductile Iron Specials as Per IS 9523/2000including unloading, transportation and stacking charges for fixing of valves with specials including labour charges for lowering, laying,jointing etc complete as directed by Engineer in Charge 23 50 mm DI Single chamber Air release valve in 100 mm DI main with fixing of DI Specials as per IS 9523/2000 and GI Specials as per IS 1239/ Part II including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below 100 x 100 x 80 mm DI A / F Tee - 1 No 100 mm DI Flanged Socket T.P. - 1 No 100 mm DI Flanged Spigot T.P. - 1 No 80 x 50 mm G.I. Reducer heavy - 1 No 80 mm G.I. Flange - 1 Set 50 mm G.I.Pipe - 0.15 m50 mm G.I. Flange - 1 set 50 mm DI Single chamber Air release valve - 1 No Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 Nos - 100 mm Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 1 No - 80 mm Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 1 No - 50 mm Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 1 No -100mm dia 80 mm G.I.Pipe - 0.15 m 24 50 mm DI Single chamber Air release valve in 200 mm DImain with fixing of DI Specials as per IS 9523/2000and GI Specials as per IS 1239/ Part II including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below 200 x 200 x 80 mm DI A / F Tee - 1 No 200 mm DI Flanged Socket T.P. - 2nos (1 No.- 20 kg) 80 x 50 mm G.I. Reducer Heavy - 1 No 80 mm G.I. Flange - 1 Set 50 mm G.I.Pipe - 0.15 m50 mm G.I. Flange - 1 set C.I Surface box - 1 No 50 mm DI Single chamber Air release valve - 1 No Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 Nos - 200 mm Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 1 No - 80 mm Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 1 No - 50 mm Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos. -200mm 80 mm DI Single chamber 25 Air release valve in 250 mm DI main with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below250 x 250 x 80 mm DI A / F Tee - 1 No. 250 mm DI Flanged Socket T.P. - 2nos (1 No.-27 kg), 80mm x 1.00 m DI D/F Pipe - 1 No, C.I Surface box - 1 No80 mm DI Single chamber Air release valve - 1 No, Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 Nos - 250 mm Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 No - 80 mm Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos. -250mm 26 80 mm DI Single chamber Air release valve in 300 mm DImain with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below 300 x 300 x 80 mm DI A / F Tee - 1 No 300 mm DI Flanged Socket T.P. - 2nos (1 No.-37 kg) 80mm x 1.00 m DI D/F Pipe - 1 No C.I Surface box - 1 No 80 mm DI Single chamber Air release valve - 1 No Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 Nos - 300 mm Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 No - 80 mm Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos. -300mm 27 80 mm DI Single chamber Air release valve in 350 mm DImain with fixing of DI Specials as per IS 9523/2000 including loading, transportation and Stacking Charges as per the following sizes as per the drawing, details of valves and specials as below 350 x 350 x100 mm D.I. A / F Tee - 1 No, 350 mm DI Flanged Socket T.P., 350 mm DI Flanged Spigot T.P. 100x80 D.I. D/F Taper, Surface box - 1 No, 80 mm DI Single chamber Air release valve, Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 2 Nos - 350 mm, Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 1 Nos - 100 mm, Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete - 1 Nos - 80 mm, Jointing the C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials)- 2 Nos. -350mm 28 Earth work excavation and depositing on bank with an initial lead of 10m and initial lift of 2m in the following classification including other incidental charges such as barricading etc excluding refilling in hard stiff clay,stiff black cotton,hard redearth, shales, murram, gravel, stoney earth and earth mixed with small size boulder sand hard gravelly soil complete as directed by the Engineer in Charge. 250mm DI S/S K7 Class Pipe 29 300mm DI S/S K7 Class Pipe 30 350mm DI S/S K7 Class Pipe 31 110mm HDPE PN10 Class Pipe 32 200mm HDPE PN10 Class Pipe 33 Refilling with excavated soil (other than sand) complying with standard specification in layers of 15cm watered well rammed and consolidated after the pipes and specials are laid,jointed and tested etc. and removing and depositing the surplus earth complete as directed by the Engineer-in-charge. 250mm DI S/S K7 Class Pipe 34 300mm DI S/S K7 Class Pipe 35 350mm DI S/S K7 Class Pipe 36 110mm HDPE PN10 Class Pipe 37 200mm HDPE PN10 Class Pipe 38 Lowering of D.I Pipes and specials in the trenches and laying to proper grade and alignment complete as per standard specifications and as directed by the Engineer in Charge.250mm DI S/S K7 Class Pipe 39 300mm DI S/S K7 Class Pipe 40 350mm DI S/S K7 Class Pipe 41 Lowering HDPE pipes and specials to trench and laying to proper grade and alignment complete as per standard specifications and as directed by the Engineer in Charge.110mm HDPE PN10 Class Pipe 42 200mm HDPE PN10 Class Pipe 43 Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste complete as per standard specifications and as directed by the Engineer in Charge.50 MM UPVC 6 KSC pipe (Power Cable Cover Pipe) 44 Jointing the DI S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants, cost of jointing materials and testing to the required pressure with water etc., complete as per standard specifications and as directed by the Engineer in Charge.250mm DI S/S K7 Class Pipe 45 300mm DI S/S K7 Class Pipe 46 350mm DI S/S K7 Class Pipe 47 Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by Engineer in Charge.110mm HDPE PN10 Class Pipe 48 200mm HDPE PN10 Class Pipe 49 Testing of M.S. / C.I. / D.I / P.V.C. / H.D.P.E / pipes with hydraulic testing equipment by filling with waterand testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes.250mm DI S/S K7 Class Pipe 50 300mm DI S/S K7 Class Pipe 51 350mm DI S/S K7 Class Pipe 52 110mm HDPE PN10 Class Pipe 53 200mm HDPE PN10 Class Pipe 54 Valve Chamber :Construction of masonry valve chamber: Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cumPlain Cement Concrete 1:4:8using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification Brick work in CM 1:5(one cement & five sand) using ground moulded country bricks of size 8.75 inch X 4.25 inch X 2 3/4 inch standard specification including finishing, curing, etc., complete complying with standard specification - 100cftPlastering with cement mortar (1:3) 12 mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)RCC (M20) Precast Slab of 0.15m thickness using 20mm thick hard broken stone jelly and river sand excluding the cost of reinforcement grills and fabrication charges but including moulding, curing, finishing charges and fixing in position neatly complying with standard specification and as directed by the Departmental Engineer etc. complete-Supply and Fixing of Cut Stone Slab all faces dressed including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specificationCI surface box at a of size 100x125x150 mm conforming to IS 3950 having hinged and weighting not less than 33 kg.The surface box shall be fixed on top of the RCC Refilling the trenches with suitable excavated earth available in layers of 150 mm thick, watering, ramming & consolidation complete as directed by the Engineer in chargecover slab during the casting of slab for key rod operation. The surface box shall be painted with 3 coats of black bitumastic paintConveyance of excess earth to a distance not exceeding 5km as directed by the Corporation Engineer including cost of loading, transportation and unloading charges etc complete (Total Earthwork Quantity - Refilling Quantity)Valve Chamber Size 2.00 m x 1.80 m x 1.30 m 55 Valve Chamber Size 1.20 m x 1.00 m x 1.20 m 56 Valve Chamber Size 1.6 m x 1.1 m x 1.4 m 57 Valve Chamber Size 1.8 m x 1.2 m x 1.6 m 58 Providing anchorage arrangements by drilling borewell using hand bore set to a dia of 4 inserting 110 MM PVC pipe, scooping of sand from the pipe and laying of concrete in PCC 1: 2: 4 including supply delivery and fixing of clamp sets to hold both water carrying and cable encasing pipe and earthwork excavation for a depth of 1.0 M before starting drilling of bore wells as per the details Earthwork excavation Above water level in light or sandy soil for infiltration gallery, syphon or connecting pipe line and connected works including shoring and strutting and charges for special tools and plants for bailing/ pumping etc., such as air compressor and helmet. Drilling of borewells of size 4 to 5 dia in sedimentary formation using hand boresets including insertion of casing pipes etc Supply of the following UPVC Pipe 6 KSc Pipe as per IS specifications 4985/2000 110mm UPVC Pipe For inserting into the drilling bore PCC 1: 2: 4 (one cement, two sand and four aggregates) using 20 MM ISS Guage HBG Stone jelly including cost of all materials at site and labour charges for mixing, laying, compacting, finishing, curing etc, complete and as directed by Department officersSupply and fabrication charges for making clampset sitable for Connecting main including cost of bending drilling holes suitable for bolts, painting one coat of red oxide etc complete and as directed by TWAD Board officers Clampset For 200 mm HDPE PN10 Pipe. Clampset For 50 mm UPVC Pipe Centre Section of 75 mm*100 mm*10 mm- 2No.T Section (1000mm*210mm*10mm-2 No.) Top Side Plates of 75 mm*210 mm*10 mm - 2No. Supply of Bolts and nuts ofsize 16 mm dia x 65 to 90 mm length fully threaded bolts and nuts with 2 Nos. 59 Disposal of surplus earth including loading & unloading, conveyance within a distance of 5 Km and spreading as directed by the Engineer in Charge. For Pipe Quantity andRoad Restoration 60 Labour charges for cutting open roads in BT / WBM for laying of water supply pipe line measurementas directed by the Engineer in Charge. 61 Dismantling concrete roads for layingpipe line excluding cost of earth work in linear measurement as directed by the Engineer in Charge. 62 P.C.C 1:4:8 (one cement, four sand and Eight coarse aggregate) using Ordinary Portland cement and 40 mm H.B.G stone including mixing concrete, laying, curing and compacting of concrete etc., complete and as directed by the engineer in charge.Below GL upto 1.5 m Depth 63 Below GL from 1.50 m upto 4.5 m Depth 64 Flooring with Plain Cement Concrete 1:4:8(one cement, Four fine aggregates and Eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., and finished with cement mortar (1:3) 12 mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) 65 P.C.C 1:2:4 (one cement, two sand and four coarse aggregate) using Ordinary Portland cement and 20 mm H.B.G stone including mixing concrete, laying, curing and compacting of concrete etc., complete and as directed by theengineer in charge. Below GL upto 1.5 m Depth 66 BARRICADING FOR PIPELINE WORKS FOR THE WSSWORK: Barricading work (Where, there is less traffic areas and broader roads etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia and 1.80m height) vertical with horizontal poles in three rows including painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including fixing charges and fixing 75mm dia reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by the engineer in charge. Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil,wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depthwith intiallead and lifts and cleaning and levelling the site and refilling etc.,completeFirst Depth of 2 M 67 Earth work excavation for foundation in Soft disintegrated rock, laterite, soft rock or kankar,not requiring blasting complete and as directed by Departmental OfficersFirst Depth of 2 M 68 Depth of 0M to 2 M 69 Depth of 2 M to 3 M 70 Depth of 3 M to 4 M 71 Earth work excavation for foundation in Medium Rock and Dense Medium Rock not requiring blasting complete and as directed by Departmental OfficersSecond Depth of 2 M to 3 M 72 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the Engineer incharges - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) Below GL upto 1.50 m Height 73 Above GL Upto 4.5 m Height 74 Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 340Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Msand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the Engineer incharges - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards.Below GL upto 1.50 m Height 75 Below GL 1.50 - 4.50 M DEPTH 76 Above GL 0 -4.50 M 77 From 4.50 m to 7.32 m ht. From G.L. 78 From 7.32 m to 10.98 m ht. From G.L. 79 From 10.98 m to 14.64 m ht. From G.L. 80 From 14.64 m to 18.30m 81 From 18.3 m to 21.96m 82 Sinking of infiltration well of 4.50m internal dia and 5.40m external dia below water level including all incidental charges in light or sandy soil directed by the Engineers @ well curbincluding all labour charges etc, complete and as directed by Departmental Officers. 1st Depth of 2m 83 2nd Depth of 2m 84 3rd Depth of 2m 85 4th Depth of 2m 86 Porous concrete in CC 1:4 (One cement and four hard broken granite jelly of a size 20mm) for steining of infiltration well excluding cost of centering but including curing etc., complete and as directed by the Engineers @ well curbincluding all labour charges etc, complete and as directed by Departmental Officers. 87 Providing for cutting edge using 12G MS sheets including the cost of fabricating welding and placing in position in the curb including supply of the MS sheet. 88 Plugging the bottom of the well with coarse sand of approved sizes and grade as directed by the Board officers. Well curb triangular portion including all cost and conveyance of materials to site and all Labour charges etc, complete. (10 mm Stone) 89 Brick work in CM 1:5(One Ordinary Portland Cement (OPC) & Five Sand) using ground moulded Second Class Chamber burnt bricks of size 9 x 4 3/8 x 2 3/4standard specification including finishing, curing, etc., complete complying with standard specification and as directed by Departmental officers.Above GL Upto 4.5 m Height 90 Special ceiling plastering with CM 1:3 mix 10mm thick complying with standard specification and as directed by the Departmental Officers. 91 Plastering with cement mortar (1:5) 12 mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications and as directed by Departmental officers. 92 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 93 Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. For Pump Room-Nearby 2.00 LL Proposed Sumps - 2 No. 94 Supplying, fabricating and fixing of MS Grills with Doors and Window gate (5.00 mx 1.80 m) with one Coat of Red Oxide with primer including all costs such as welding, grinding, fabrication charges cost and Conveyance at all materials to site etc.complete as per Standard Specification. 95 Painting two coats with Ready Mixed Enamel Paint in MS Grill gate (5 mx 1.80) two sleevesover the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all Grill Works. 96 Supply, delivery fabrication and placing inposition of MS, RTS rods for reinforcement for binding ring, pilasters, roof slab and well curb including cost of binding wire etc. complete and as directed by Departmental Officers. 97 Providing steel centering using MS plate of size 90 cm x 60 cm - 13G to 10G thick welded with 25 cm x 3 mm MS angles supported with country wood scantling of size 10 cm x 6.5 cm at 50 cm c/c strutting with casuarinas props of 10 cm to 13 cm dia etc. complete and as directed by Departmental officers. Plain Surface - 0-3.30m 98 3.30m - 4.30m 99 6.30m - 7.30m 100 7.30m - 8.30m 101 10.30m - 11.30m 102 11.30m - 12.30m 103 14.30m - 15.30m 104 15.30m - 16.30m 105 Curved Surface - 0-3.30m 106 3.30m to 4.30 m 107 15.30m to 16.30 m 108 Circular Column 0-3.30m 109 3.30m-4.30m 110 4.30m-5.30m 111 5.30m-6.30m 112 6.30m-7.30m 113 7.30m-8.30m 114 8.30m-9.30m 115 9.30m-10.30m 116 10.30m-11.30m 117 11.30m-12.30m 118 12.30m-13.30m 119 13.30m-14.30m 120 14.30m-15.30m 121 Square Column- 0-3.30m 122 3.30m-4.30m 123 4.30m-5.30m 124 5.30m-6.30m 125 6.30m-7.30m 126 7.30m-8.30m 127 8.30m-9.30m 128 9.30m-10.30m 129 10.30m-11.30m 130 11.30m-12.30m 131 12.30m-13.30m 132 13.30m-14.30m 133 14.30m-15.30m 134 15.30m-16.30m 135 Supply and fixing of CI manhole cover of size 0.60 x 0.60 m with locking arrangements including the cost of RI sheet and fixing at the edges etc. complete and as directed by Department. officers. (heavy type) 136 Supply and fixing of PVC mould CI steps to be embeddedwith vertical clearance of 0.30 m c/c and horizontal clearance of 0.38 mc/c in staggered manner etc. complete and as directed by Departmental officers. 137 ProvidingGIventilating arrangementof size 0.10m and as directed by the Departmental officers Supply and delivery of 100mm GI Pipe nipple - 0.5 mSupply and delivery of 100 mm GI Pipe nipple - 0.30 mSupply and delivery of 100mm GI Tee - 1 NoSupply and delivery of 100 mm GI Bend - 2 No 138 Supplying and filling in foundation andbasement with stone dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 139 Refilling the sides of foundation with excavated earth (other than sand) in layersof 15cm thick, wateredwell rammed and consolidated etc.complete complying with standard specification removing and spreading the surplus earth at the placed shownand as directed by the dept officers. 140 Ellis Pattern flooring with 20mm thick in Cement Concrete 1:2:4 Mix using 3 to 10 mm Stone JellyChips and top surfaces rended smooth in Cement – 10m2( no sand to be used ) complete in accordance with the specification and as directed by the Departmental Officers. 141 Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.Fully panelled double leaf Door - D - 1.00 m x 2.00m 142 Fully panelled double leaf window W1- 0.90 x 1.20m 143 Fully panelled single leaf Ventilator - V -0.45 m x 0.60 m 144 Weathering course with surki concrete by using broken brick jelly 20mm size in pure slaked lime over RCC roof slab, the proportion (being 32:12.5) for required depth of 80mm for giving required slope and thickness to roof as required, well beaten with wooden beaters, including cost of all materials, labour charges, curing etc., complete and as directed by Department Officers. 145 Finishing the top of weathering course with one course of hydraulic machine pressed tiles of size 20cm x 20cm x 2cmof approved quality using CM 1:3 mixed with crude oil 10% by weight of cement using P Sand and pointed with same oiled mortor including cost of all materials, labour charges, curing etc., complete and as directed by Department Officers. 146 Supplying and fixing of cut stones size 0.45x0.45x0.15mfor Overhead Tanks Complete as per standard specifications and as directed by departmental officers 147 Providing and fixing of RCC access ladderin RCC 1:1.5:3 (one cement, one and half sane! and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., to required height and clear width of 4Scm consisting of two Nos. of ve~ical post of 10cm x lS cm and step slab of 2Smm x 25mm etc., complete and as directed by Deptofficers. RCC Inside Access LadderFor 2.00 LL Proposed Sump - 5.25 m 148 For 2.00 LL Proposed Sump - 2.30 m 149 For 0.60 LL OHT - 2 No - 3.80 m 150 For 1.00 LL OHT - 3.20 m 151 For 2.50 LL OHT - 3.75 m 152 For 3.00 LL OHT - 2 No - 4.25 m 153 For 2.00 LL OHT - 4.25 m 154 Providing RCC ventilator over roof slab and roof domefor Overhead Tanks Complete as per standard specifications and as directed by departmental officers (0.15 m dia) 155 Providing RCC spiral staircase as per approved design for Overhead Tanks Complete as per standard specifications and as directed by departmental officersFor 0.60 LL OHT - 2 No. 156 For 1.00 LL OHT 157 For 2.50 LL OHT 158 For 3.00 LL OHT - 2 No. 159 For 4.00 LL OHT 160 Providing RCC hand rail of 1.2 m height around the top of the roof slab with jolly workfor Overhead Tanks Complete as per standard specifications and as directed by departmental officers RCC POST 161 RCC JOLLY WORK 162 Provision for pipe connection arrangements for inlet outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading etc., complete as detailed below.0.60 LL OHT - Pipe detailsInlet-∅100mmOutlet -∅125mmScour -∅80mmOverflow-∅100 mm 163 1.00 LL OHT - Pipe detailsInlet-∅125mmOutlet -∅150mmScour -∅80mmOverflow-∅125 mm 164 2.50 LL OHT - Pipe detailsInlet ∅-150mmOutlet ∅-200mmOverflow ∅-150mmScour ∅-100mm 165 3.00 LL OHT - Pipe detailsInlet ∅-200mmOutlet ∅-250mmOverflow ∅-200mmScour ∅-100mm 166 4.00 LL OHT - Pipe detailsInlet ∅-200mmOutlet ∅-250mmOverflow ∅-200mmScour ∅-150mm 167 Labour charges for Painting Emblem in accordance with the size and specifications as approved by the Board on the Service Reservoirs including cost of all consumables, one coat of base paint, scaffolding charges on the Service Reservoirs. 168 Supply, delivery and fixing of enameled water level indicator of approved design and pattern (graduation in metric system) with required all accessories as directed by Departmental Officers. 169 Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction.The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP , Fully AutomaticAir break Star Delta up to 20 HP and Auto Transformer starter for above 20 HPstarting and for continuous operation, complete as directed by Departmental Officers.605 LPM x 30 M - 5 HP Head for 6 Proposed Infiltration Wells 170 Supply and delivery of Horizontal split casing centrifugal pump conforming to IS 1520 and as amended thereafter with CI casing and split glands, stainless steel shaft, hydraulically and dynamically balanced bronze impellers capable of discharging required quantity of water against a total head noted below due to all causes and with the accessories such as G.M air release cock, Grease cup, G.I priming funnel, M.S lifting hook, drip water G.I pipe connections, leading to the outside of pump house rubber water deflector, double flap foot valve, G.M strainer including unique tyre type coupling, common M.S fabricated base to mount pump and motor and other standard fittings etc complete. Pump shall be capable of discharging the specified quantity at the head noted at the minimum NPSH at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase, 415 V, 50 Hz, 1500 RPM.complete as directed by Departmental Officers. 2830 LPM x 40 M Head - 33 HP @ Intermediate Sump 171 2830 LPM x 35 M Head - 29 HP @ Vallipuram Headworks 172 Supply and delivery of AC three Phase 4 pole Horizontal squirrel cage Induction motor confiriming to IS 325/1996 and as amended thereafter with Class F insulation to suit the speed of pump and suitable for operation with continous S1 rated, 415 V +/- 10 %, 50 HZ +/- 5%, TEFC (upto 20 HP), SPDP (above 20 HP). The motor offered should be of energy efficient motors. 2830 LPM x 40 M Head - 33 HP @ Intermediate Sump 173 2830 LPM x 35 M Head - 29 HP @ Vallipuram Headworks 174 Supply and delivery of Fully Automatic Auto Transformer Starter suitable for the motor offered. Floor mounting type air/ oil cooled Auto Transformer Starter with tapings at 50%, 65%, 80%, housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IV and as amended therafter for operation in AC three Phase 50 Hz (+/- 5%), 415V (+/- 10%) with the following components, under voltage release with no volt coil, over load relay with dash pot arrangements, single phasing preventor, LED ON/ OFF switches, Mounted Ammeter, Earth leakage relay, contactor assembly suitable for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc. 2830 LPM x 40 M Head - 33 HP @ Intermediate Sump 175 2830 LPM x 35 M Head - 29 HP @ Vallipuram Headworks 176 Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). 605 LPM x 30 M - 5 HP Head for 6 Proposed Infiltration Wells 177 Supply and delivery of Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415 / 440V 50 HZ conforming to ISS with ISI marking complete as directed by Departmental Officers. 178 Providing TWIN CI EARTHING as per IS 3043/1987 and Latest amendments, complete, as directed by Departmental Officers.For above 25-60 HP installation 179 Supply and delivery of L.T. Cables 1.1 KV Grade Armoured Aluminium conductor cross linked Poly Ethylene insulated PVC sheathed cables confirming toIS 7098 (Part I)/1988with ISI marking, complete and as directed by Departmental OfficersFor Proposed Sump - 2.00 LL at Vallipuram Headworks and Intermediate Location - 2 No.3 Core 4 Sq.mm LT Cable 180 3 Core 16 Sq.mm LT Cable 181 3 Core 70 Sq.mm LT Cable 182 Supply and delivery of PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER complete and as directed by Departmental Officers.3 Core 10 Sq.mm PVC Insulated and Sheathed Cable 183 Laying of Electrical Cables in trenches inside the pump room or in air, complete. and as directed by Departmental Officers. 184 JOINTING OF XLPE INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER and as directed by Departmental Officers.3 Core 10 Sq.mm PVC Insulated and Sheathed Cable 185 Jointing of L.T.Cables 1.1 KV Grade Armoured Aluminium conductor cable confirming to IS 1554/ Part 1 with ISI marking, complete. and as directed by Departmental Officers.3 Core 4 Sq.mm LT Cable 186 3 Core 16 Sq.mm LT Cable 187 3 Core 70 Sq.mm LT Cable 188 Labour charges for the erection of submersible pump set in bore well / openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days complete and as directed by DepaUpto 5 HPrtmental Officers. 189 Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports complete and as directed by Departmental Officers.Above 30 HP to 40 HP 190 Above 20 HP to 30 HP 191 Supply and Delivery of Horizontal Three Phase Distribution Board with MCBS 4 way / 6 way / 8 way / 12 wayTPMCB sheet steel distribution boards Flush type / Surface type fitted with Bus bars and Neutral links with single/ three phase MCB outgoings and separate 4 way provision for accommodating one No. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating one No. 4 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm. completewith Metal door cover with IP 42 protection as directed by TWAD Board Officers - Legrand (MDS)/ HAGER (L&T) -4 ways 3 Phase DB .(TWAD SOR 4.XVIII 1 pg 231)605 LPM x 30 M - 5 HP Head for 6 Proposed Infiltration Wells 192 Supply and delivery of floor mounting type weather, vermin and dust proof powder coated M.V. cubical panel board of 14 SWG M.S. Sheet and MS angle iron frame work with enclosed copper busbar 4 Nos. of required current carrying capacity with all internal wiring as per I.E. Rules,. The design of panel board should facilitate for quick operation of all switches from the front side. The panel board should be completed with all internal wiring including necessary twin copper earthing arrangements and consists of the components for controlling incoming and outgoing supply, complete and as directed by Departmental Officers. 250 Amps MCCB with Thermo Magnetic Release 4 Pole to control the incoming load from EB supply to Panel Board 193 250 AmpsMCCBwith Thermo Magnetic Release 3 Pole to control outgoing supply to the pumpsethead with interlocking 194 MCB 240 V/415 V 50HZ AC SUPPLY Triple Pole 63 A, 10 KA (Higher End ) to control outgoing supply to Vaccuum Pumpset 195 MCB 240 V/415 V 50HZ AC SUPPLY Triple Pole 63 A, 10 KA (Higher End ) to control outgoing supply to capacitor bank 196 MCB 240 V/415 V 50HZ AC SUPPLY Triple Pole 63 A, 10 KA (Higher End ) to control outgoing supply to lighting load 197 Pumproom Wiring Wiring with 1.5sq.mm(22/0.3) PVC INSULATED SINGLE CORE MULTI STRAND FIRE RETARDANT FLEXIBLE COPPER CABLE WITH ISI MARK CONFORMING TO IS 198 Supply and Delivery of BOX TYPE SINGLE FLUORESCENT FITTING WITH COPPER CHOKE AND CONDENSOR COMPLETE WITH ISI MARK- 4 Ft. 40 Watts Box type with Ballast (Philips/Crompton / Wipro / Equivalent) complete and as directed by Departmental Officers. 199 Supply and Delivery of FLUORESCENT TUBULAR LAMPS WITH ISI MARK - Cool Day light 4 Ft. 40 Watts complete and as directed by Departmental Officers. 200 Supply and Delivery of Plug and Sockets- 5 Amps /15 amps.3 pin flush type wall socket only, complete and as directed by Departmental Officers. 201 Supply and Delivery of Plug and Sockets- 15 Amps 3 pin Top, complete and as directed by Departmental Officers. 202 AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories 203 Supply and Delivery of Led outdoor fittings -48 Watts LED Focus light with LED fittings, complete and as directed by TWAD Board Officers. 204 Supplyanddeliveryoffollowingsetoftoolsmountedon ateakwoodtoolBoard to befixedonthewall of the pumproom, complete and as directed by Departmental Officers. DE Spanner set 6 to 32 Jhalani Make or equivalent 205 Rings spanner set 6 to 32 Jhalani Make or equivalent 206 200mm Screw Driver 825 Taparia Make or equivalent 207 300mm Screw Driver 829 Taparia Make or equivalent 208 800gm Ball Pane Hammer with Handle Taparia Make 209 Pipe Wrench 14” Jhalani Make or equivalent 210 Pipe Wrench 24” Jhalani Make or equivalent 211 6” Chain wrench best India make or equivalent 212 Supplyanddeliveryoffollowingsafety appliances, complete and as directed by Departmental Officers.Electrical gloves tested to 11 KV /22 KVwith wooden box dusted with french chalk powder 213 Wooden First Aid Box 214 Laminated shock treatment chart 215 Fire Buckets-4 Nos made out of 40 x 40 x 6 mm MS Angle 216 Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms 217 Supply and delivery of Change over switches complete and as diected by Departmental Officers. 63 Amps 3 phase 500 Volt 4 poleto the pumpset 218 400 Amps 3 phase 500 Volt 4 poleto the pumpset 219 Supply , delivery and fixing of GI/CI D/F pipes and specials for providing pipe connection for the pumpset, complete and as directed by Departmental Officers.100 mm DI D/F Pipe from Suction Side to 100 mm Diameter Gate Valve, Reflux Valve in Delivery Side to 200 mm Outlet with necessary specials and joints For Proposed Infiltration Wells - 6 No.SUCTION SIDE SUCTION SIDE 100 mm X 2 M DI. D/F PIPE- 6 Nos 100 mm DI.D/F 90 DEG BEND- 2 Nos 100 mm X 0.3 M DI. D/F PIPE- 2 Nos DELIVERY SIDE 100 mm DI D/F Gate Valve - 2 Nos 100 mm DI D/F Non - Return Valve - 2 Nos 100 mm X 0.3 M DI. D/F PIPE-2 No.) 100 mm DI.D/F 90 DEG BEND- 1 No 100 mm X 0.3 M DI. D/F PIPE- 1 No.) 100 mm x 100 mm x 100 mm DI.A/F TEE- 1 Nos 100 mm X 1 M DI. D/F PIPE- 1 No. 100 mm DI.D/F 90 DEG BEND- 1 Nos 100 mm X 2.0 M DI. D/F PIPE- 1 Nos 100 mm DI.D/F 90 DEG DUCKFOOT BEND- 2 No 100 mm to 200 mm DI.D/F Eccentric Enlarger - 1 No Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS- 638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. - 100 mm - 24 No. 220 200 mm Inlet, 80mm Overflow, 250 mm DI D/F Pipe from Suction Side to 250 mm Diameter Gate Valve, Reflux Valve in Delivery Side to 300 mm Outlet with necessary specials and joints For Proposed Sump - 2.00 LL at Vallipuram HeadworksInlet Side 200 mm DI. D/F DUCK FOOT BEND- 6 No. 200 mm x 3 M DI. D/F PIPE-6 No. 200 mm DI.D/F 90 DEG BEND- 6No. 200 mm x 1 M DI. D/F PIPE- 6 No. 200 mm DI.D/F 90 DEG BEND- 6No. 200 mm x 5 M DI. D/F PIPE-6 No. (Slotted) 200 mm DI. Bellmouth- 6No. Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. -200 mm - 42 No. Overflow Side 80 mm DI.D/F 90 DEG BEND- 1No. 80 mm x 1 M DI. D/F PIPE- 1 No. Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. - 80 mm - 1 No. SUCTION SIDE 300 mm DI.DUCK FOOT BEND- 2 Nos 250 mm x 5 M DI. D/F PIPE- 2 Nos 250 mm DI.D/F 90 DEG BEND- 2 Nos 250 mm x 5 M DI. D/F PIPE- 2 Nos DELIVERY SIDE 250 mm DI D/F Gate Valve - 2 Nos 250 mm DI D/F Non - Return Valve - 2 Nos 250 mm DI.D/F 90 DEG BEND- 1 No 250 mm X 0.3 M DI. D/F PIPE- 1 No.) 250 mm x 250 mm x 250 mm DI.A/F TEE- 1 Nos 250 mm DI D/F Electomagnetic Flow Meter - 1 Nos 250 mm x 1 M DI. D/F PIPE- 1 No. 250 mm to 300 mm DI. D/F Eccentric Enlarger - 1 No. 300 mm DI Flanged Spigot T.P - 1 No. Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. -250 mm - 16 No. Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. - 300 mm - 1 No. 221 300 mm Inlet, 80mm Overflow, 250 mm DI D/F Pipe from Suction Side to 250 mm Diameter Gate Valve, Reflux Valve in Delivery Side to 350 mm Outlet with necessary specials and jointsFor Proposed Sump - 2.00 LL at Intermediate Location Inlet Side 300 mm DI. D/F DUCK FOOT BEND- 1 No. 300 mm x 3 M DI. D/F PIPE- 1 No. 300 mm DI.D/F 90 DEG BEND- 1No. 300 mm x 1 M DI. D/F PIPE-1 No. 300 mm DI.D/F 90 DEG BEND- 1No. 300 mm x 5 M DI. D/F PIPE- 1 No. (Slotted) 300 mm DI. Bellmouth-1 No. Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. -300 mm Overflow Side 80 mm DI.D/F 90 DEG BEND- 1No. 80 mm x 1 M DI. D/F PIPE- 1 No. Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. - 80 mm - 1 No. SUCTION SIDE 300 mm DI.DUCK FOOT BEND- 2 Nos 250 mm x 5 M DI. D/F PIPE- 2 Nos 250 mm DI.D/F 90 DEG BEND- 2 Nos 250 mm x 5 M DI. D/F PIPE- 2 Nos DELIVERY SIDE 250 mm DI D/F Gate Valve - 2 Nos 250 mm DI D/F Non - Return Valve - 2 Nos 250 mm DI.D/F 90 DEG BEND- 1 No 250 mm X 0.3 M DI. D/F PIPE- 1 No.) 250 mm x 250 mm x 250 mm DI.A/F TEE- 1 Nos 250 mm DI D/F Electomagnetic Flow Meter - 1 Nos 250 mm x 1 M DI. D/F PIPE- 1 No. 250 mm to 350 mm DI. D/F Eccentric Enlarger - 1 No. 350 mm DI Flanged Spigot T.P - 1 No. Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. -250 mm Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts of IS 1364-1(2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete. - 350 mm 222 2T capacity hand operated over head Travelling (HOT) crane suitable for a span upto 6 Mtrs, and travel length upto 10 Mtrs. with clear lift upto 6 Mtrs. including gear type chain pulley block with GI chain and geared Travelling trolley complete with all accessories including girdercomplete as directed by Departmental Officers. 223 Supply and delivery of 150mm dia Pressure Gauge and Vaccum guage including all accessories as per specification (For Suction and Delivery to be mounted on wall on Teak Wood Board) complete as directed by Departmental Officers. 224 Supply and delivery ofLT/LTCT METERING BOX as per IE rules and TANGEDCO norms-Up to 50HP/37 KW (which includes LT meter panel board, 6 Nos. suitable fuse carriers).
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
32.
Drinking Water Supply and Sanitation #10254164 Price Bid
Providing And Installation Of Electro Mechanical Equipments And Allied Works For Arsenic Removal Plant At Sonada Zone-I Piped Water Supply Scheme Block_ Krishnanagar-I Dist. - Nadia Under Emd, Phe Dte-2 Supply, Delivery And Storage At Site Of Horizontal Split Casing Centrifugal Pumping Machineries With Baseplate, Flexible Coupling, Coupling Guard, Foundation Bolt Etc. Having The Following Specification And As Pernit. : ( Pumps Suitable For Plc Operated Unmaned Operation Facility ) ( For Pumping Water From Cwr To Ohr ) Discharge :- 34 M3 Per Hour Generated Head :- 40 Mwc H-Q-P Curve Of Pumps In Test Bed Has To Be Submitted During The Delivery. 3 Supply, Delivery And Storage At Site Horizontal Foot Mounted Induction Motor Suitable For The Pump Duty Mentioned Above ( Item No- 1 ) With Adequate Margin As Specified In The Nit. Routine Test Certificate Of Induction Motor Has To Be Submitted During Delivery 4 Supply, Delivery And Storage At Site Of Monoblock Vacuum Pumping Machinarywith The Following Specification And As Pernit. : A ) Vacuum : Upto 600 Mm Of Hg B ) Air Flow Rate :1.8 To20.5M3 / Hr 5 Supply, Delivery And Storage At Site Lift Type 80 Mm Foot Valve Combined With Stainer As Per Is : 4038 Pn-0.6 And As Per Detail Given In The Nit . :-N.B. : Test Certificate To Be Produced For Each Valve ( At Suction Side Of Pump ) 6 Supply, Delivery And Storage At Site Of Ci Doble Flanged Single Door Swing Check80 Mm Dia N.R.Vas Per Is : 5312, Part-I, Pn-1.0 And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Delivery Side Of Pump ) 7 Supply, Delivery And Storage At Site 80 Mm Diacast Iron Actuator Operated Wafer Type Butterfly Valvegenerally Conforming To Is:13095 And Pn-1.0. And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve ( At Delivery Side Of Pump ) 8 Supply, Delivery And Storage At Site 80 Mm Diadouble Flanged Cast Iron Manually Operated Non-Rising Spindle Sluice Valve Generally Conforming Tois:14846 Pn-1.0.And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Common Delivery Header ) 9 Supply, Delivery And Storage At Site 80 Mm Diacast Iron Kinetic Double Orifice Air Released Valve As Per Relevant Is, Pn-1.0.And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Common Delivery Header ) 10 Supply, Delivery And Storage At Site Ms Dismantling Joint Dn 80 Mm Pn 1.0 ( For Delivery Side & Common Header Ofpump ) 11 Supply, Delivery And Storage At Site Bourdon Type Pressure & Compound Gauges, 150 Mm Dia Cast Aluminium Dial With , Ss Internal, Dn 15 Gi Impulse Line With Three Way Cock. 12 A ) Pressure Guages ( 0 - 15 Kg / Cm2 ) 13 B ) Compound Guages ( +1 To -1 Kscg ) 14 Supply, Delivery And Storage At Site Of 80 Mm Dia , Thickness 5.4Mm And 80 Mm Dia 5.4 Mm Thick Ms Black Pipe Conforming To Is:3589 Gr.330 ( For Suction, Delivery & Delivery Header ) Along With Necessarybends, Fittings Viz. Flanges, Bolts, Nuts, Gaskets , Concentric Enlarger50 X 80 Mm Etc. As Reqd. To Make The Installation Complete In All Respect Andas Pernit. 15 Supply Delivery And Storage At Site Of Ultrasonic / Radartype Continuous Level Measuring Unit With Provision Of 4 To 20 Ma Analogue Signal, Indicator And Recorder For Continuous Level Monitoring As Well As 5 Nos. Relay Out Put For Sensing High, Low, Low - Low Level In Suction Sump As Per Specification Given In Nit. 16 Supply, Delivery And Storage At Site20 Mm Dia, G.Ipipes ( Medium Duty ) , Water Storage Pvc Tank , Bends, Sockets, Tees, Fittings, And Other Specials, Gaskets , Solenoide Valve , Gate Valve For Auto & Manual Operation Etc. As Reqd. To Make The Piping Arrangement Of Vacuum Pumpcomplete In All Respect As Pernit. ( For Priming Arrangement ) 17 Supply, Delivery And Storage At Site 2 Mm. Thick Crca Sheet Steel Enclosed Cubical Type Indoor Floor Mounted415 Volt Mccpanelhaving Required Feeders With Plc As Per Specification Given In Nit. 18 Supply, Delivery And Storage At Site 2 Mm. Thick Crca Sheet Steel Enclosed Cubical Type Indoor Wall Mounted415 Volt Power Distribution Board Having Required Feedersas Per Specification Given In Nit. 19 Supply, Delivery And Storage At Site 1.1 Kv Grade35 Mm2 3½Core Xlpe Insulated Cupper Armoured Cable As Per Technical Specification Of Nit. ( From Cut Out To Pdb Panel ) ) 20 Supply, Delivery And Storage At Site 1.1 Kv Grade50 Mm2 3½Core Xlpe Insulated Aluminiun Armoured Cable As Per Technical Specification Of Nit. ( For Pdb Panel To Mcc Panel ) 21 Supply, Delivery And Storage At Site 1.1 Kv Grade25 Sq.Mm 3½Core Xlpe Insulated Aluminiun Armoured Cable As Per Technical Specification Of Nit. ( For Voltage Stabilizer To Mcc Panel ) 22 Supply, Delivery And Storage At Site 1.1 Kv Grade 6 Sq. Mm.3Core Xlpe Insulated Aluminiun Armoured Cable As Per Technical Specification Of Nit. ( Formcc Panel To Motor. ) 23 Supply, Delivery And Storage At Site1.1 Kv Grade 2.5 Sq. Mm.12Core Pvc Insulated Armoured Copper Controlcable As Per Technical Specification Of Nit. ( Formcc Panel To Actuator. ) 24 Supply, Delivery And Storage At Site1.1 Kv Grade 2.5 Sq. Mm.2Core Pvc Insulated Armoured Copper Controlcable As Per Technical Specification Of Nit. ( For Solenoid Valve Connection ) 25 Supply, Delivery And Storage At Site1.1 Kv Grade 4Sq. Mm.2Core Pvc Insulated Armoured Coppercable As Per Technical Specification Of Nit. ( For Vaccume Pump Connection ) 26 Earthing & Lightning Protection For Pump House And Electrical Installation As Per Iss And Ie Rules And As Per Technical Specification Of Nit. ( Earth Pit 2 Nos+ 2 L / A ) 27 Supply, Delivery At Site And Storeage Of Gi Perforated Cable Tray At Pump House For Laying Of Incoming & Outgoing Power And Control Cables To And From Mcc Panelhaving Proper M.S. Structural Support As Per Nit Specification And Direction Of Eic. 28 Supply Delivery At Site And Storage Of Illumination Arrangement Like Suitable Size Wire, Switch , Switch Board , Tube Light Fitting , Exhaust Fan , Ceilling Fan , Led Outdoor Fixturecomplete As Per Specification Of Nit. 29 Supply Delivery At Site And Storage Of Safety Equipment Like Suitable Capacity Fire Extinguisher , Sand Bucket , Fire Bracket, Rubber Mats, Shock Treatment Chart And First Aid Box, Chair , Table, 415 Volt Danger Board Complete As Per Specification Of Nit. 30 Supply Delivery At Site And Storage Of Suitable Capacity Power Correction Arrangement As Per Specification Of Nit. 31 Supply Delivery At Site And Storage Of Disinfection Arrangement With Flow Rate 100 Lph As Per Specification Of Nit. 32 Part-B 33 Installation Of All Items As Mentioned In Sl.No.1 To 15 & 23 To 28 ( Part-A ) Including Construction Of Pump Foundations, Pipe Supports, Valve Supports, Laying Of Cables With Necessary Jointing Materials, Earthing Arrangement Of Motors, Starters, Including Supply Of All Erection Items Viz. Rubber Gaskets, Nuts & Bolts Etc., Including Cost Ofwelding Etc. As Required For Complete Installation Including Making Slope Of Floor And Arrangement Of Removing Gland Leckage Wateras Per Hydraulic Standard & Ie Rules In Compliance With Specification Of Nitand Upto Entire Satisfaction Of Eic. 34 Painting Of The Installation ( Viz.Pumps, Valves, Pipe Lines Etc.By Two Coats Of Epoxy Paint ( Colour To Be Decided By Eic ) Over A Coat Of Primer As Per Nit Specifiaction & Direction Of Eic. 35 Testing & Commissioning Of The Entire Installation I.E.Pumps, Motors, Valves Etc. As In Part A ( Sl No. 1To 28 ) As Per Direction And To The Entire Satisfaction Of E.I.C. 36 Operation And Maintenance Of The Entire Installation In High Lift Pumping Stations On 24 Hrs. Basis Including Guarding For A Period Of 90 Days Are To Be Provided With Supply Of Skilled, Semi-Skilled And Un-Skilled Personnel Including Watch And Ward Personnel From The Date Of Commissioning. During Maintenance Period Supply Of All Consumable Materials Sundrys And Lubricants Are To Be Supplied. Charges Of Electrical Energy During Maintenance Period Will Be Born By The Department. 37 Supervision Charges For Electrical Installation By Licensed Electrician As Per Ie Rules, 1956 Read With Latest Amendments With Overhead Expenditures.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
33.
Drinking Water Supply and Sanitation #10254160 Price Bid
Providing Electro-Mechanical Equipments And Allied Works For Arsenic Removal Plant At Uttar Tajpur Phase-Ii Piped Water Supply Scheme, Block Karimpur-Ii, Dist. Nadia Under Emd, Phe Dte.-2 Supply, Delivery And Storage At Site Of Horizontal Split Casing Centrifugal Pumping Machineries With Baseplate, Flexible Coupling, Coupling Guard, Foundation Bolt Etc. Having The Following Specification And As Pernit. : ( Pumps Suitable For Plc Operated Unmaned Operation Facility ) ( For Pumping Water From Cwr To Ohr ) Discharge :- 45 M3 Per Hour Generated Head :- 40 Mwc H-Q-P Curve Of Pumps In Test Bed Has To Be Submitted During The Delivery. 3 Supply, Delivery And Storage At Site Horizontal Foot Mounted Induction Motor Suitable For The Pump Duty Mentioned Above ( Item No- 1 ) With Adequate Margin As Specified In The Nit. Routine Test Certificate Of Induction Motor Has To Be Submitted During Delivery 4 Supply, Delivery And Storage At Site Of Monoblockvvacuum Pumping Machinarywith The Following Specification And As Pernit. : A ) Vacuum : Upto 600 Mm Of Hg B ) Air Flow Rate : 1.8 To 20.5 M3 / Hr 5 Supply, Delivery And Storage At Site Lift Type 100 Mm Foot Valve Combined With Stainer As Per Is : 4038 Pn-0.6 And As Per Detail Given In The Nit . :-N.B. : Test Certificate To Be Produced For Each Valve ( At Suction Side Of Pump ) 6 Supply, Delivery And Storage At Site Of Ci Doble Flanged Single Door Swing Check80 Mm Dia N.R.Vas Per Is : 5312, Part-I, Pn-1.0 And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Delivery Side Of Pump ) 7 Supply, Delivery And Storage At Site 80 Mm Diacast Iron Actuator Operated Wafer Type Butterfly Valvegenerally Conforming To Is:13095 And Pn-1.0. And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve ( At Delivery Side Of Pump ) 8 Supply, Delivery And Storage At Site 80 Mm Diadouble Flanged Cast Iron Manually Operated Non-Rising Spindle Sluice Valve Generally Conforming Tois:14846 Pn-1.0.And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Common Delivery Header ) 9 Supply, Delivery And Storage At Site 80 Mm Diacast Iron Kinetic Double Orifice Air Released Valve As Per Relevant Is, Pn-1.0.And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Common Delivery Header ) 10 Supply, Delivery And Storage At Site Ms Dismantling Joint Dn 80Mm Pn 1.0 ( For Delivery Side & Common Header Ofpump ) 11 Supply, Delivery And Storage At Site Bourdon Type Pressure & Compound Gauges, 150 Mm Dia Cast Aluminium Dial With , Ss Internal, Dn 15 Gi Impulse Line With Three Way Cock. 12 A ) Pressure Guages ( 0 - 15 Kg / Cm2 ) 13 B ) Compound Guages ( +1 To -1 Kscg ) 14 Supply, Delivery And Storage At Site Of 100 Mm Dia , Thickness 5.4Mm And 80 Mm Dia 5.4 Mm Thick Ms Black Pipe Conforming To Is:3589 Gr.330 ( For Suction, Delivery & Delivery Header ) Along With Necessarybends, Fittings Viz. Flanges, Bolts, Nuts, Gaskets , Eccentric Reducers , Concentric Enlarger Etc. As Reqd. To Make The Installation Complete In All Respect Andas Pernit. 15 Supply Delivery And Storage At Site Of Ultrasonic / Radartype Continuous Level Measuring Unit With Provision Of 4 To 20 Ma Analogue Signal, Indicator And Recorder For Continuous Level Monitoring As Well As 5 Nos. Relay Out Put For Sensing High, Low, Low - Low Level In Suction Sump As Per Specification Given In Nit. 16 Supply, Delivery And Storage At Site20 Mm Dia, G.Ipipes ( Medium Duty ) , Water Storage Pvc Tank , Bends, Sockets, Tees, Fittings, And Other Specials, Gaskets , Solenoide Valve , Gate Valve For Auto & Manual Operation Etc. As Reqd. To Make The Piping Arrangement Of Vacuum Pumpcomplete In All Respect As Pernit. ( For Priming Arrangement ) 17 Supply, Delivery And Storage At Site 2 Mm. Thick Crca Sheet Steel Enclosed Cubical Type Indoor Floor Mounted415 Volt Mccpanelhaving Required Feeders With Plc As Per Specification Given In Nit. 18 Supply, Delivery And Storage At Site 2 Mm. Thick Crca Sheet Steel Enclosed Cubical Type Indoor Wall Mounted415 Volt Power Distribution Board ( Pdb ) Having Required Feedersas Per Specification Given In Nit. 19 Supply, Delivery And Storage At Site 1.1 Kv Grade35 Mm2 3½Core Xlpe Insulated Cupper Armoured Cable As Per Technical Specification Of Nit. ( From Wbsedcl End Cut Out To Pdb Panel ) ) 20 Supply, Delivery And Storage At Site 1.1 Kv Grade50 Mm2 3½Core Xlpe Insulated Aluminiun Armoured Cable As Per Technical Specification Of Nit. ( For Pdb Panel To Airp Mcc Panel ) 21 Supply, Delivery And Storage At Site 1.1 Kv Grade 25 Sq. Mm. Xlpe Insulated Aluminiun Armoured Cable As Per Technical Specification Of Nit. ( For Pdb To Low Lift Mcc Panel . ) 22 Supply, Delivery And Storage At Site 1.1 Kv Grade 6 Sq. Mm.3Core Xlpe Insulated Aluminiun Armoured Cable As Per Technical Specification Of Nit. ( For Mcc Panel To Motor ) 23 Supply, Delivery And Storage At Site1.1 Kv Grade 2.5 Sq. Mm.12Core Pvc Insulated Armoured Copper Controlcable As Per Technical Specification Of Nit. ( Formcc Panel To Actuator. ) 24 Supply, Delivery And Storage At Site1.1 Kv Grade 2.5 Sq. Mm.2Core Pvc Insulated Armoured Copper Controlcable As Per Technical Specification Of Nit. ( For Solenoid Valve Connection ) 25 Supply, Delivery And Storage At Site1.1 Kv Grade 4 Sq. Mm.2Core Pvc Insulated Armoured Coppercable As Per Technical Specification Of Nit. ( For Vacuum Pump Connection ) 26 Earthing & Lightning Protection For Pump House And Electrical Installation As Per Iss And Ie Rules And As Per Technical Specification Of Nit. ( Earth Pit 2 Nos+ 2 L / A ) 27 Supply, Delivery At Site And Storeage Of Gi Perforated Cable Tray At Pump House For Laying Of Incoming & Outgoing Power And Control Cables To And From Mcc Panelhaving Proper M.S. Structural Support As Per Nit Specification And Direction Of Eic. 28 Supply Delivery At Site And Storage Of Illumination Arrangement Like Suitable Size Wire, Switch , Switch Board , Tube Light Fitting , Exhaust Fan , Ceilling Fan , Led Outdoor Fixturecomplete As Per Specification Of Nit. 29 Supply Delivery At Site And Storage Of Safety Equipment Like Suitable Capacity Fire Extinguisher , Sand Bucket , Fire Bracket, Rubber Mats, Shock Treatment Chart And First Aid Box, Chair , Table, 415 Volt Danger Board Complete As Per Specification Of Nit. 30 Supply And Delivery At Site And Storage Of Suitable Capacity Power Corection Arrangement As Per Specification Of Niet 31 Supply And Delivery At Site And Storage Of Suitable Capacity Disinfection Arrangement With Flow Rate 100 Lph As Per Specification Of Niet 32 Part-B 33 Installation Of All Items As Mentioned In Sl.No.1 To 28 ( Part-A ) Including Construction Of Pump Foundations, Pipe Supports, Valve Supports, Laying Of Cables With Necessary Jointing Materials, Earthing Arrangement Of Motors, Starters, Including Supply Of All Erection Items Viz. Rubber Gaskets, Nuts & Bolts Etc., Including Cost Ofwelding Etc. As Required For Complete Installation Including Making Slope Of Floor And Arrangement Of Removing Gland Leckage Wateras Per Hydraulic Standard & Ie Rules In Compliance With Specification Of Nitand Upto Entire Satisfaction Of Eic. 34 Painting Of The Installation ( Viz.Pumps, Valves, Pipe Lines Etc.By Two Coats Of Epoxy Paint ( Colour To Be Decided By Eic ) Over A Coat Of Primer As Per Nit Specifiaction & Direction Of Eic. 35 Testing & Commissioning Of The Entire Installation I.E.Pumps, Motors, Valves Etc. As In Part A ( Sl No. 1To 28 ) As Per Direction And To The Entire Satisfaction Of E.I.C. 36 Operation And Maintenance Of The Entire Installation In High Lift Pumping Stations On 24 Hrs. Basis Including Guarding For A Period Of 90 Days Are To Be Provided With Supply Of Skilled, Semi-Skilled And Un-Skilled Personnel Including Watch And Ward Personnel From The Date Of Commissioning. During Maintenance Period Supply Of All Consumable Materials Sundrys And Lubricants Are To Be Supplied. Charges Of Electrical Energy During Maintenance Period Will Be Borne By The Department. 37 Supervision Charges For Electrical Installation By Licensed Electrician As Per Ie Rules, 1956 Read With Latest Amendments With Overhead Expenditures.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
34.
Drinking Water Supply and Sanitation #10254155 Price Bid
Providing Electro-Mechanical Equipments And Allied Works For Arsenic Removal Plant At Ghoralia Zone-Ii Phase-Ii Piped Water Supply Scheme, Block Santipur, Dist. Nadia Under Emd, Phe Dte-2 Supply, Delivery And Storage At Site Of Horizontal Split Casing Centrifugal Pumping Machineries With Baseplate, Flexible Coupling, Coupling Guard, Foundation Bolt Etc. Having The Following Specification And As Pernit. : ( Pumps Suitable For Plc Operated Unmaned Operation Facility ) ( For Pumping Water From Cwr To Ohr ) Discharge :- 28 M3 Per Hour Generated Head :- 40 Mwc H-Q-P Curve Of Pumps In Test Bed Has To Be Submitted During The Delivery. 3 Supply, Delivery And Storage At Site Horizontal Foot Mounted Induction Motor Suitable For The Pump Duty Mentioned Above ( Item No- 1 ) With Adequate Margin As Specified In The Nit. Routine Test Certificate Of Induction Motor Has To Be Submitted During Delivery 4 Supply, Delivery And Storage At Site Of Monoblock Vacuum Pumping Machinarywith The Following Specification And As Pernit. : A ) Vacuum : Upto 600 Mm Of Hg B ) Air Flow Rate :1.8 To20.5M3 / Hr 5 Supply, Delivery And Storage At Site Lift Type 80 Mm Foot Valve Combined With Stainer As Per Is : 4038 Pn-0.6 And As Per Detail Given In The Nit . :-N.B. : Test Certificate To Be Produced For Each Valve ( At Suction Side Of Pump ) 6 Supply, Delivery And Storage At Site Of Ci Doble Flanged Single Door Swing Check80 Mm Dia N.R.Vas Per Is : 5312, Part-I, Pn-1.0 And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Delivery Side Of Pump ) 7 Supply, Delivery And Storage At Site 80 Mm Diacast Iron Actuator Operated Wafer Type Butterfly Valvegenerally Conforming To Is:13095 And Pn-1.0. And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve ( At Delivery Side Of Pump ) 8 Supply, Delivery And Storage At Site 80 Mm Diadouble Flanged Cast Iron Manually Operated Non-Rising Spindle Sluice Valve Generally Conforming Tois:14846 Pn-1.0.And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Common Delivery Header ) 9 Supply, Delivery And Storage At Site 80 Mm Diacast Iron Kinetic Double Orifice Air Released Valve As Per Relevant Is, Pn-1.0.And As Per Detail Given In Nit. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Common Delivery Header ) 10 Supply, Delivery And Storage At Site Ms Dismantling Joint Dn 80 Mm Pn 1.0 ( For Delivery Side & Common Header Ofpump ) 11 Supply, Delivery And Storage At Site Bourdon Type Pressure & Compound Gauges, 150 Mm Dia Cast Aluminium Dial With , Ss Internal, Dn 15 Gi Impulse Line With Three Way Cock. 12 A ) Pressure Guages ( 0 - 15 Kg / Cm2 ) 13 B ) Compound Guages ( +1 To -1 Kscg ) 14 Supply, Delivery And Storage At Site Of 80 Mm Dia , Thickness 5.4Mm And 80 Mm Dia 5.4 Mm Thick Ms Black Pipe Conforming To Is:3589 Gr.330 ( For Suction, Delivery & Delivery Header ) Along With Necessarybends, Fittings Viz. Flanges, Bolts, Nuts, Gaskets , Concentric Enlarger50 X 80 Mm Etc. As Reqd. To Make The Installation Complete In All Respect Andas Pernit. 15 Supply Delivery And Storage At Site Of Ultrasonic / Radartype Continuous Level Measuring Unit With Provision Of 4 To 20 Ma Analogue Signal, Indicator And Recorder For Continuous Level Monitoring As Well As 5 Nos. Relay Out Put For Sensing High, Low, Low - Low Level In Suction Sump As Per Specification Given In Nit. 16 Supply, Delivery And Storage At Site20 Mm Dia, G.Ipipes ( Medium Duty ) , Water Storage Pvc Tank , Bends, Sockets, Tees, Fittings, And Other Specials, Gaskets , Solenoide Valve , Gate Valve For Auto & Manual Operation Etc. As Reqd. To Make The Piping Arrangement Of Vacuum Pumpcomplete In All Respect As Pernit. ( For Priming Arrangement ) 17 Supply, Delivery And Storage At Site 2 Mm. Thick Crca Sheet Steel Enclosed Cubical Type Indoor Floor Mounted415 Volt Mccpanelhaving Required Feeders With Plc As Per Specification Given In Nit. 18 Supply, Delivery And Storage At Site 2 Mm. Thick Crca Sheet Steel Enclosed Cubical Type Indoor Wall Mounted415 Volt Power Distribution Board Having Required Feedersas Per Specification Given In Nit. 19 Supply, Delivery And Storage At Site 1.1 Kv Grade35 Mm2 3½Core Xlpe Insulated Cupper Armoured Cable As Per Technical Specification Of Nit. ( From Cut Out To Pdb Panel ) ) 20 Supply, Delivery And Storage At Site 1.1 Kv Grade50 Mm2 3½Core Xlpe Insulated Aluminiun Armoured Cable As Per Technical Specification Of Nit. ( For Pdb Panel To Mcc Panel ) 21 Supply, Delivery And Storage At Site 1.1 Kv Grade25 Sq.Mm 3½Core Xlpe Insulated Aluminiun Armoured Cable As Per Technical Specification Of Nit. ( For Voltage Stabilizer To Mcc Panel ) 22 Supply, Delivery And Storage At Site1.1 Kv Grade 6 Sq. Mm.3Core Xlpe Insulated Aluminiun Armoured Cable As Per Technical Specification Of Nit. ( Formcc Panel To Motor. ) 23 Supply, Delivery And Storage At Site1.1 Kv Grade 2.5 Sq. Mm.12Core Pvc Insulated Armoured Copper Controlcable As Per Technical Specification Of Nit. ( Formcc Panel To Actuator. ) 24 Supply, Delivery And Storage At Site1.1 Kv Grade 2.5 Sq. Mm.2Core Pvc Insulated Armoured Copper Controlcable As Per Technical Specification Of Nit. ( For Solenoid Valve Connection ) 25 Supply, Delivery And Storage At Site1.1 Kv Grade 4Sq. Mm.2Core Pvc Insulated Armoured Coppercable As Per Technical Specification Of Nit. ( For Vaccume Pump Connection ) 26 Earthing & Lightning Protection For Pump House And Electrical Installation As Per Iss And Ie Rules And As Per Technical Specification Of Nit. ( Earth Pit 2 Nos+ 2 L / A ) 27 Supply, Delivery At Site And Storeage Of Gi Perforated Cable Tray At Pump House For Laying Of Incoming & Outgoing Power And Control Cables To And From Mcc Panelhaving Proper M.S. Structural Support As Per Nit Specification And Direction Of Eic. 28 Supply Delivery At Site And Storage Of Illumination Arrangement Like Suitable Size Wire, Switch , Switch Board , Tube Light Fitting , Exhaust Fan , Ceilling Fan , Led Outdoor Fixturecomplete As Per Specification Of Nit. 29 Supply Delivery At Site And Storage Of Safety Equipment Like Suitable Capacity Fire Extinguisher , Sand Bucket , Fire Bracket, Rubber Mats, Shock Treatment Chart And First Aid Box, Chair , Table, 415 Volt Danger Board Complete As Per Specification Of Nit. 30 Supply Delivery At Site And Storage Of Suitable Capacity Power Correction Arrangement As Per Specification Of Nit. 31 Supply Delivery At Site And Storage Of Disinfection Arrangement With Flow Rate 100 Lph As Per Specification Of Nit. 32 Part-B 33 Installation Of All Items As Mentioned In Sl.No.1 To 15 & 23 To 28 ( Part-A ) Including Construction Of Pump Foundations, Pipe Supports, Valve Supports, Laying Of Cables With Necessary Jointing Materials, Earthing Arrangement Of Motors, Starters, Including Supply Of All Erection Items Viz. Rubber Gaskets, Nuts & Bolts Etc., Including Cost Ofwelding Etc. As Required For Complete Installation Including Making Slope Of Floor And Arrangement Of Removing Gland Leckage Wateras Per Hydraulic Standard & Ie Rules In Compliance With Specification Of Nitand Upto Entire Satisfaction Of Eic. 34 Painting Of The Installation ( Viz.Pumps, Valves, Pipe Lines Etc.By Two Coats Of Epoxy Paint ( Colour To Be Decided By Eic ) Over A Coat Of Primer As Per Nit Specifiaction & Direction Of Eic. 35 Testing & Commissioning Of The Entire Installation I.E.Pumps, Motors, Valves Etc. As In Part A ( Sl No. 1To 28 ) As Per Direction And To The Entire Satisfaction Of E.I.C. 36 Operation And Maintenance Of The Entire Installation In High Lift Pumping Stations On 24 Hrs. Basis Including Guarding For A Period Of 90 Days Are To Be Provided With Supply Of Skilled, Semi-Skilled And Un-Skilled Personnel Including Watch And Ward Personnel From The Date Of Commissioning. During Maintenance Period Supply Of All Consumable Materials Sundrys And Lubricants Are To Be Supplied. Charges Of Electrical Energy During Maintenance Period Will Be Born By The Department. 37 Supervision Charges For Electrical Installation By Licensed Electrician As Per Ie Rules, 1956 Read With Latest Amendments With Overhead Expenditures.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
35.
Housing Urban and Rular Development #10235078 Price Bid
Tender For New Construction Of Cheriyan Nagar Library Chennai; 1 DISMANTALING WORKS 2 Dismantling etc., all complete 3 Brick / Stone Masonry in lime mortar walls 4 Dismantling RCC by manual / by using deploying machineries 5 Doors and Windows including removal of frames, hinges and fastenings 6 CIVIL WORK 7 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size bouldersand Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum 8 Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 40 KM from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 9 Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 10 Supplying and filling in foundation, basement, etc with filling Gravel inwellrammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 11 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 12 Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls.The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide “Chloripyrifos” and sprayingthe same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II) / 1981 and as directed by the departmental officers. 13 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including C & U clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc.,Rate to include all materials, labour charges, wastages ,placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by theClient / Engineer-in-charge. 14 For Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members 15 for plane surfaces such as rectangular or square rcc columns, sunshades, topand bottom slab of rcc boxing, etc. 16 Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members 17 Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. 18 For FoundationandBasement 19 For Ground Floor 20 For First Floor 21 For Second Floor 22 Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 23 Supply and constructing Fly ash Brick (230 x 110 x 75mm) masonry in Cement Mortar 1:5 (One cement and Five M sand) in foundations, basement and superstructure usingFly ash Bricks of size 230x110x75mm etc. Rate to include all materials, labour charges, wastagesfor working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 24 For Ground Floor 25 For First Floor 26 For Second Floor 27 Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails. 28 Upto 3 M Height 29 3 m to 5.5 m Height 30 5.5 m to 7.5 m Height 31 7.5 m to 10 m Height 32 10 m to 12.5 m Height 33 Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of P sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 34 Plastering 15 mm thick for external surfaces with Cement Mortar 1:5 (1 of cement : 5 of P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturers Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate includingcost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 35 Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine river sand)according to specifications. Rate shall include for providing GI chicken mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 36 Painting the new plastered walls with two coats for Interior Plastic Emulsion paint approved quality and colour over a priming coat, with two coats of wall putty including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 37 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 38 UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work 39 UPVC VentilatorSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chamberedsections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer before use on work 40 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 41 Painting the new Iron work with two coats of Ready Mixed Enamel Paint of aproved quality and colour over the existing priming coatincluding the cost all materials etc.,complete, in all floors and as directed by the Departmntal Officers. 42 Providing and fixing Vertical blinds , quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete. 43 Supply and laying with best quality the following materials of Ruby Red, Raw Silk Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4’x2’ and above 18mm to 20mm thick Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 44 Supply and laying with best quality the following materials of Sinthetic Grey, Paradise and similar varieties Granite Slabs Granite Tiles - (Superfine Polished with Machine Cut Edges) of size 2’0” x 1’0” and above 10mm Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 45 Nosing for Granite Slab-Single Nosing 46 Grooving the Granite Slab 47 Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Executive Engineer before use on work 48 Paving the floor with design Antiskirt Ceramic tiles (colour and shade as directed) of size 305 mm x 305 mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement. 49 Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 50 Supplying and filling the sunken slab area by BRICK-BATCOBA by adding CICO NO:1 of approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Naterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturers specification after entire completion of laying pipes, sanitary fittings etc Rate including all mater aaod and lifts, working materials, labour charges wastages with necessary lead and at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specificatior and as directed by the Client/ Engineer-in Charge 51 Including applying two coats not less than 2 nm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No. 1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturers specifications and as directed. 52 Waterproofing: Providing and Applying CFTRI approvedtwo component flexible polymer modified acryliccementitious waterproofing coating with a mix ratio of(5 Liquid :7 Powder) to the RCC surface of the UGT/OHT tankapplied @ 2.2kg/m2 in 2 coats to achieve1.2mm DFT, having Elongation at break >120% asper ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right anglesof wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completelyas per specification. Followed by applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Mortar on as protective plastering @ 29kg/m2. The material having Compressive strength of 38 MPa at 28 days as per EN 12190, Adhesive Bond Test, >1.5 Mpa as per EN1542, followed by Water curing by sprinkling water for 3 times a day for 5- 7 days. Followed by applyingtwo component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA, having mixing Ratio (Base: Hardener: Water) – 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification 53 Finishing the top of roof with one course of Solar Reflective ceramic tiles of size 305 mm x 305 mm x 7 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 54 Supplying And Fixing Rubber Moulded Interlocking Paver Blocks Against Available Edge Restraints 83 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)) 55 Supplying and fabricating of MS structural steel supports for various applications using channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above. 56 Providing Teak wood wrought and put up for frames of doors, windows and ventilators and any other similar joinery works including cost of country wood scantlings and labour charges for manufacturing the frames and fixing hold fasts and fixing in position etc. for all lengths as per architect designs. 57 Best Indian Teak Wood Panelled door in double shutters with frames 100x75mm at side,verticals and top. The shutters shall beof 40mm thick with moulded panels in 20mm thick planks,6Nos.of iron hold fasts fixed in c.c.1:2:4 6Nos.of butt hinges 125mm long including wind appliances, furniture,iron fittings,1No.of iron padlock 15cm long for locking arrangements and fixing inposition,etc.,complete.(ISI STD) 58 Varnishing the new wood work one coat with best shellac and with fine best varnish of approved quality varnish of teak wood natural finish including preparation of surfaces with sand papering in patty priming etc., complete complying with standard specification and as directed by the Departmental officers. 59 Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter 60 Best Indian Teak Wood panelled door shutter for single leaf door. The shutter shall be 40mm thick with moulded panels in 20mm thick planks inclusive of 3 Nos.butt hinges 125mm long,furniture iron fittings,1No.of jappened hooks and eyes 200mm long and 6mm thick and iron pad lock 15cm long including fixing inposition,etc.,complete 61 FALSE CEILING WITH GYPSUM PLAIN TILES Providing and fixing true horizontal level false ceiling using SAINT -GOBAINGYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at1200mm c/cmax by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm (Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying 62 Art work as per the direction of department official, over Oil Painting with first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster of paris, putty, etc., wherever required (Relevent ISI STD), including putty works. 63 Supplying and Fixing of English Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 64 Supplying and Fixing of Tamil Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 65 upplying and Fixing ofEmblem (15”) Stainless Steel size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 66 Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges. 67 Supplying and erecting in position LIGHT DUTYSTEEL TRUSSES as per the drawing.The materials and design of the trusses should confirm to the relevant Indian Standard specification.The trusses shall be procured only from reputed manufactures oftrusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design.The rate quoted shall include the cost oftrusses.Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc.,The roof sheeting shall project 0.762m from the eves purlins. 68 Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. 69 Providing, supplying, and fixing factory-manufactured pre-fabricated insulated roofing panels made of PUF (Polyurethane Foam) sandwiched between two metal skins, comprising pre-painted galvanized iron (PPGI) sheets of 0.5 mm thickness on both sides with 40 mm to 50 mm thick CFC-free polyurethane foam core of minimum density 40 kg/m³, having tongue and groove jointing with cam-locking arrangement for weather-tight sealing. Panels shall have minimum overall R-value of 6.5 and thermal conductivity not more than 0.022 W/m·K. Roofing to be supported over structural purlins/trusses using self-drilling screws with EPDM washers, sealants, fasteners, ridge covers, and flashing, complete. Rate includes supply, transport, hoisting, cutting to size, edge finishing, foam taping at joints, sealing, labour, tools, scaffolding, and all incidentals for a fully finished, insulated, and weatherproof roofing system as per manufacturer’s specification and as directed by the Engineer-in-Charge. 70 Brick Wall Cladding Nuvocotto Edge Cut Wall Tiles Natural Red finish in size 230mm x 76mm x 15mm 71 Brick JalliNuvocotto Camp Jallie Natural Red finish in size 200mm x 200mm x 60mm 72 Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT 73 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 74 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 75 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 76 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 77 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 78 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 79 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,. 80 PLUMBING 81 Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, unioncoupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. 82 Supplying and fixing Stainless Steel Health Faucetwith all the accessories etc, 83 Supply and fixing White without PedastalWash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia B Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples,15mm CP Pillar Tap etc (The wash basin should be got approved by Executive Engineer before use on works). 84 Providing and fixing C.P. Angle stop cock of approved quality conformingto IS:8931 :15mm nominal bore 85 Providing and fixing Brass Chromium Plated Towel Rail 60cm long and20mm dia with Brackets etc,. 86 Providing and fixing Brass Chromium Plated Soap Tray of size 150mm x 100mm 87 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines. 88 75 DIA 89 110 DIA 90 Providing, fixing and testing of PVC waste pipe of agricultural sereis conforming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. 91 40 DIA 92 Providing, fixing and testing of PVC floor- trap 110 dia with necessory of multitrap connection (heavy duty hinged type) with brass CP frame & cover (100 mm x 75 mm). Trap of 100 mm dia inlet and 75 mm dia outlet fixed on a bed of cement concrete etc.complete. (The frame and grating shall be approved by Architects) 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Concealed On Wall) 94 20MM DIA 95 25MM DIA 96 Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 97 25mm dia Cost of gate valve 98 32mm dia Cost of gate valve 99 Providing, installation, testing and commissioning approved make CIY-type Strainer conforming to IS standardwithnecessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts including all the accessories to complete the work as per the specifications. 100 32 mm nominal bore 101 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines.(Pipes Runningin the Shaft & below ground level) 102 75 DIA 103 110 DIA 104 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Pipes Runningin the Shaft & below ground level) 105 25MM DIA 106 32MM DIA 107 Providinging and fixing in position PVC Vent cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.(The PVC cowl should be got approved by the Executive Engineer before use on works). 108 75MM DIA 109 110MM DIA 110 Providing and fixing GI. puddle flanges (IS; 1239) fabricated out of 6 mmthick M.S. plate of size 300 x 300mm plusdia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. Including painting with two coats of primer complete as required. The entire fitting shall be hot dipped galvanized.(Rate As per Quotation) 111 32 mm dia 112 40 mm dia 113 50 mm dia 114 65 mm dia 115 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:(Rate As per Quotation) 116 Constructing in site of Inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm ,Heavy duty RCC precast cover (SFRC), benching in CC M-15, internalfaces plastered smooth in CM1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge. 600x600 mm size internal and depth will 450mm to 1200mm & 900x800 mm size internal and depth will 450mm to 1200mm. (Rate As per Quotation) 117 600x600 118 Making of core cutting in RC slab of maximum 150mm thick of following diameter. 119 a) 150 mm dia 120 b) 125 mm dia 121 Providing and fixing MS slotted angle iron brackets, hangers, MS grip bilts,universal clamps with thereaded rod,supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc., as per detailed drawing for supporting soil, waste and rain water pipes and water Providing pipes in shafts with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls/outer walls etc., The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08 mm thick conformed to IS 1239 etc., complete as directed by the employer. 122 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.(600x600mm) 123 Providinging, installing, fixing, jointing, testing and commissioning of PVC Storm water pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste,The quoted rate shall include necessary earth work, fittings,pipe to be laid below ground level in trenches upto required depth, dewatering, jointing of pipes, water testing and setting,refilling, and making good the same complete as required. 124 110 DIA 125 Providing, fixing and testing of Terrace Rain water outlet (110dia) with all the accessories etc,. 126 INTERIOR 127 BOOK SHELF 1 - 2100 x 400 x 2100 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 128 MAGAZINE HOLDER - 600 x 250 x 1200 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 129 DISPLAY UNIT AT RECEPTION - 1200 x 300 x 600 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 130 LEDGE 5000 x600 x 750 Panels are 16mm MR ply with 1mm Matt Finish on both sides with 2mm PVC Edge Band finish mounted to the wall. 131 4SEATERLEARNINGCENTRETABLE-2000mmx1000mmx750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thick 132 6SEATERLEARNINGCENTRETABLE-2400mmx1000mmx 750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thic 133 READING CHAIR - Lounge Chair Uphostered in EPU Leather. Sleek Four Star Fixed Base With Revolving Function In Warm White Powder Coated Finish. Three Dimensional Lumbar Support Design. Model number SCML-SF30.1. Bosses Cabin or equivalent. 134 ROLLINGCHAIRS-Medium back chair with metal grey back frame, metal grey adjustable PU armrest (4D), moulded foam seat with metal grey shell, STG drive-by-wire mechanism with 4 position locking, polished aluminum alloy five-star base with metal grey PU castors. Model number CHT66SW. Bosses Cabin or equivalent. 135 SINGLESTUDYCHAIR:Multi-Purpose Chair Upholstered In Water Based PU Leather. Cushioned Seat and White Ash Solid Wood Legs. Model number SCMF-XCB33 - Latte Brown. Bosses Cabin or equivalent. 136 LOCKER & FOOTWEAR STORAGE- – 1950x375x470mmPLU main 2 DR numeric lock with envelop slot – 1950x375x470mm. Godrej interio or equivalent. 137 RECEPTIONDESK-1800mmx650mmx 1050mm- Reception Table In Matt White and Oak Laminate. IncludesStorage Cabinet and WireManagement Grommet OnDesk. Top Model number 28ROB003(BCRMB-OB 03). Bosses cabin or equivalent. 138 Seamlessly shift from warm, cozy tones to cool, vibrant whites (also known as tunable white or human-centric lighting) is an advanced JS3 Serial LED Connecting System LED lighting technology that allows users to adjust the color temperature of the light output — from warm to cool — to suit mood, time of day, or functional needs.LED Type: OSRAM SMD 3030Iceil™ Supply of OSRAM 24V LED Module Color Temperature: 2700K to 10000K with Iceil IP67 Drivers CRI: ≥90 – Delivers natural, true-to-life color accuracyMounting: High-performance aluminum rigid PCB– Ensures excellent thermal management and long lifespanConfiguration:– Each block features 4 high-quality LEDs– Optimized light spacing for shadow-free illumination– Viewing Angle: PMMA lens Ultra-wide 160° beam spreadDimmable: No Compatibility:DALI, Tuya Smart App, Alexa, & Google Home. Touch Panel, and RF Remote control optionsPower Consumption:– Only 4-6W per sq.ft– Energy-efficient yet high-lumen outputLighting Quality:– Uniform light diffusion across the stretch ceiling– Suitable for both translucent and printed membrane typesIceil™ Power Supply: Wide Input Range 100-305AC (Class I), Surge Protection with 6KV/4KV, Working temp. -20~ +45°C 20% ~ 90%RH, Metal case IP67, Power factor <0.98LED and Power Supply Warranty: 5 Years or 50,000 Hours (whichever comes first)Certifications: CE & RoHS Certified – environmentally safe and globally compliant Installation of pre-supplied LED lighting fixtures, associated drivers, and control systems, including all necessary mounting, wiring, terminations, and system integration by qualified technicians.The scope includes:Installation of LEDs as per lighting layoutMounting and secure placement of LED drivers and control gear in accessible locationsElectrical connections between LEDs, drivers, and controllers using appropriate cablingTesting of each circuit and commissioning of the full lighting setupRate Includes: Skilled labor, tools, basic fasteners, and all on-site installation efforts.. 139 Iceil™ supplies exclusively premium-grade of European Standard PVC Thermo-Stretchable Membrane, complying with BS1-D0 as per EN 13501-1 and Class A as per ASTM E84-2024 fire safety standards. The membrane is precision-cut to the required shape and size, with perimeter edges high-frequency welded with harpoon inserts. Installation is carried out using a durable aluminium profile framing system, ensuring a seamless, secure, and aesthetic ceiling solutionThickness 0.18 mmWeight 250–300 gsm ± 2%Light Transmission Up to 75% (for translucent type)Width Up to 5 meters (seamless); larger areas joined with invisible seamsStretching Method Thermal installation at ~50–60°C using hot air gas blower Fire Rating BS1-D0, as per EN 13501-1, ASTM E84-2024 Class A Explanation: B = Very limited contribution to fire, s1 = Little or No Smoke Production, d0 = No flaming droplets or particles Moisture Resistance 100% Moisture-proofUV Resistance Yes – does not yellow or degrade indoorsEnvironmental ROHS compliant, Phthalate-free, UL Certified - Tri-O-cresyl phosphate < 50mg per kgCertification Manufactured in ISO 9001:2015 certified factoryWarranty 10 Years (under standard indoor conditions) Installation of pre-supplied Stretch Ceiling System, including site preparation, profile fixing, membrane stretching, and finishing using specialized tools and skilled labor.The scope includesFixing of aluminum/PVC perimeter profiles as per approved ceiling layoutHeating and stretching of the pre-cut stretch ceiling membrane on-siteAlignment, tensioning, and seamless fitting of membrane onto the installed profilesIntegration of cutouts for lighting, sprinklers, air conditioning vents, speakers, etc.Final finishing, cleaning, and handover of installed ceiling areaRate Includes: Skilled labor, installation tools, on-site execution, and necessary accessories for completing the installation of the stretch ceiling. 140 The Iceil Wooden Box is built from durable MR/BWP-grade plywood, featuring a 12mm back board, 18mm vertical sides (150mm height), and dual 8mm flexible plywood layers for curved designs. The 150mm depth accommodates lighting and structural needs.Finish Options: White emulsion or PU-coated interior, or white reflective laminate; exterior customizable per client.Mounting: Reinforced corners, cross supports (wood/MS) every 2 ft, fixed with dash fasteners, threaded rods, or MS supports.Stretch Ceiling Compatibility: Suits Iceil’s PVC Harpoon Profile System with aluminium profiles for welded membranes.Lighting Integration: Base for rigid block LEDs with ventilation slots for heat dissipation. 141 Wall paper 142 Carpet Flooring 143 160A LT Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, Wall mounted, single front,14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars,internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The Breakerof 160A TPN MCCB and 1set of 160/5A CT with TNEB Metering provision and 1nos of 160/5A CT for APFCR . (Rate as per Quotation) 144 Supply and Erection of electrical panels Boards 145 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type Three Phase Changer Over panel of size (H 2100 X L 2000 X D 300 ) mm with suitable to accommodate 100A 4 pole Three phase Change Over Switch-1No. as incomer for EB Source and as incomer for DG Source, 6nos of 63A 4Pole MCCBs and 4nos of 32A 4Pole MCCBs compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 146 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type 50 kVAR panel of size (H 1800 X L 1800 X D 300 ) mm with suitable to accommodate Incomer 1 Nos 63A 4Pole MCCB, 7nos of 25A 4Pole MCCBs with 7% 1-10 kVAR Capacitor banks in compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 147 VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB : Supply and fixingof4way verticalTPMCBsheetsteel Industrial Type TP MCB DB with IP54 Protection of surface type fitted with bus bars and neutral links with1 No. of 63A FP MCB as Incoming and 4 Nos.of32A,10KA Triple Pole MCB in Flush with wall and making good of the concealed portion with earth connection.( Industrial Type TPMCB DB with IP54 Protections) 148 Supply and fixing of 7 segment8 way63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic doorcover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 63 A TPN MCB, 10kA, / Isolator and another separate 4 way for accommodating one no. 63 Amps, 30 mA, 4 pole ELCB / RCD (totally 8 ways in one segment) and 24 nos 6-32 A, 10kA, SP MCB / Isolators ( totally 24 nos.) for outgoing in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. withthe following in flush with wall with earth connection only. 149 Supply and fixing of 65 mm dia. (2 -1/2) GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonry pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 90W LED Streetlight fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour 150 Supply and Fixing of24W Ceiling Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 151 Supply and Fixing of11W Bulk Head Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 152 Supply of surface-mounted 24W LED wall lights to the ideal solution for a variety of indoor lighting applications. Direct illumination of the wall and surrounding surface, as well as accent lighting for vertical structures. Featuring an aesthetically pleasing, robust construction, these lights are built to withstand all weather conditions, ensuring long-lasting performance and durability • Luminaire body made of extruded aluminium alloy (grade 6063) with die cast aluminium components and non corrosive SS fasteners • Non yellowing UV stabilized translucent polycarbonate diffuser • Luminaire integrated with 24W LED • Die-cast aluminium mounting base for easy installation onto the wall • Surface mounting on wall using hardware after connecting to the power supply • IP : 65, IK : 08 • Cable entries for through-wiring of mains supply cable • Integral constant current power supply • CRI ( Ra) : >80 • Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply • Available CCT : 2700K, 3000K, 4000K, 5700K. Driver Power Supply : Integral, Input Voltage : 230-240Vac, Frequency : 50-60 Hz, Power Factor : ≥0.95, THD : <10%, Surge Protection : 4KV, Efficiency : >85%, Symmetrical Light Distribution.Product Finish options: Pure polyester powder coated RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. CE & BIS Certified. Inhouse NABL accredited lab. Brand Name : Philips, Product SKU : 919215850004 153 Supply of LED Linear Pendant luminaire is a versatile solution for projects that demand high quality of the lighting system and high visual comfort. With its modular design, the Revo-L can be used as an individual fixture or as a combination of luminaires put together in continuous lines • Luminaire made of extruded aluminium for better thermal management • polycarbonate diffuser for optimum optical performance, • Hexa-cell (Matte Black) secondary reflector • Suitable for surface and suspended mounting • Supplied with standard suspension kit (1metre).• Cable entries for through-wiring of mains supply cable • Integral power supply • Suitable for operation on 240V,50Hz single phase ac supply• Driver Power Supply : Integral, Power Factor : >0.90, THD : <10%, Surge Protection : 4KV-6KV, Efficiency : >85%, IP 44 Rating.• Dimension: 1188 x 36 x 75, 2365 x 36 x 75, 3540 x 36 x 75.• Wattage Options : Upto 40W, Upto 80W, Upto 120W.• Mounting: Pendant Mounting, Pendant Mounting, Pendant Mounting, Surface Mounting, Surface Mounting, Surface Mounting • Product Finish options: Pure polyester powder coated, RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 9016 Traffic White • CE & BIS Certified • Inhouse NABL accredited lab. Philips SP170P LED25S-6500 PSU W5L113 OD WH Smartbright Linear 154 Supply of Input power : 8W LED Bollard luminaire designed for surface mounted. Symmetrical light distribution. Luminaire madeof extruded aluminium alloy (grade 6063), die-cast aluminium of high corrosion resistance and non corrosive stainless steel fasteners. Translucent polycarbonate diffuser. Pressure die cast aluminium mounting plate Ø100.5mm x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at PCD55 for surface mounting on floor. The base plate have a cable entry hole of 70 x 24 mm dia at the center. Single cable entrance via PG7 cable gland. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.9, THD <10%, Surge protection 2.5KV. Luminaire dimension : 106mm diameter x 565mm height. CE & BIS Certified. Foundation Bolt - 2 Nos of M8 Foundation J Bolt Length 150mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each BoltInhouse NABL accredited lab. PHILIPS Bollard BCP100 LED 10W PSU GR L 750mm Solar Light 155 Supply of LED Linear Lighting to suit ceiling / wall is a slim and elegantly designed fixture, suited for varied applications offers a uniform, glareless and soft lighting.Al. Profile Housing Dimension: 1000 x 17 x 8, 2000 x 17 x 8Mounting: Surface Mounting, Product Finish: Anodized Aluminum• Luminaire made of extruded aluminium for better thermal management • PC clear / semi clear matte diffuser for excellent diffused lighting experience throughout the life of the fixture • Designed for mounting on ceiling / wall • Cable entries for through-wiring of mains supply cable • To be used with LED strip & power supply unit of suitable rating. Brand Philips Profile Shine 240 LEDs/m LED Strip | 3000K Warm White | High Brightness Linear Strip for Cove, False Ceiling, Architectural, Ambient Lighting 156 Supply of 24V 2835 Flexible LED Strip, 12W/m, Non-Integral, CCT: 2700K, 4000K, 6500KDimension: 5m / Roll, IP : 67, Brand Name : K-Lite, Code : 7289 or equivalent 157 24V Power supply, IP 67 Rated SMPS suitable for 24V LED Strip lights. Wattage: 150W, 24V Series Waterproof IP67 Power Supply24Vdc 6.25 Amps 150W Power unitDimension: 313 x 43 x 34IP : 67,Brand Name : K-Lite, Code : 8198 or equivalent 158 Supply and fixing of Fans and Air Circulator 159 Supply and fixing of 1200mm (48) sweep AC ceiling fan 5 star rated complete ( Higher end)with 2 module 100W fan step regulator (Higher end)with 2.5 metre down rod with fan clamp, and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 160 Supply and fixing of 600mm wall mounting Air circulator and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 161 Supply and fixing of 300mm(12)sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessaryaccessories and hardwares as required. 162 Supply and fixing oflouvers shutter arrangements for 300mm(12)sweep (Heavy duty) AC Exhaust fan complete 163 Supply and laying of following XLPE armoured LTUG cable in a trench/Tray with suitable cable tie tag etc as required. 164 Supply and Laying of 3 1/2 x 50 sq.mm. PVC Al.Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 165 Supply and Laying of 4C x 16 sq.mm. PVC AL. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.Main Panel to DB 166 Supply and Laying of 3C x 2.5 sq.mm. PVC Cu. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make goodMain Panel / DB to Street Lights 167 Supplying & Laying 120mm/103.5mm HDPE Pipe as per requirements including excavation & refilling. 168 Supply and fixing of double compression brass cable gland for following Aluminium conductorXLPE insulatedarmoured cable of 1100 V grade with earth connection. 169 Supply and fixing of brass cable gland for3 1/2 Cx 50 Sq.mm PVC LTUGAl. Armoured cable with earth connection 170 Supply and fixing of brass cable gland suitable for4C x 16 PVC Al. Armoured LTUG cable with earth connection. 171 Supply and fixing of brass cable gland for 3C x 2.5 sqmm COPPER cableLTUG cablewith earth connection. 172 Supply and providing cable end termination of the following sizePVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable) 173 Supply and providing cable end termination of3 1/2Corex 50Sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. 174 Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. 175 Supply and providing cable end termination of 3C X 2.5 SqmmPVC LTUGCopper cable with necessary copper cable sockets by crimping etc, with electrical connection complete. 176 Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End (SD-375) 177 Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil)Higher End (SD-385) 178 Supply and fixing of 25A Flushtype Wall Socket 25A DPMCB complete set for ACPlug inflush with wall with earth connection (For AC Plug) 179 Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigidpipe Concealed inwall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copperwire and making good of the concealed portion withsuitable colour. ( SD 430 ) 180 Supply and Run of 2 Run x 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe onconcealed wall and ceiling with continuous earth wire connection with painting of suitable colour. 181 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp andwithcopper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonrySD-233 182 Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection 183 Supply and Run of 1 of25.6.25 mm Al. Flat on wall / floor / ground for earth connection. 184 Supply and Run of 1 of25.6.25 mm Cu. Flat on wall / floor / ground for earth connection. 185 Supply, Installation, Testing and commissioning of 40 channel NVR with 4TB HDD * 4nos, Up to 40-ch 8 MP IP cameras can be connected, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by up to 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1/VGA1 outputs provided  HDMI1 Video output ) resolution Storage and Playback, Up to 4SATA interfaces and 1 eSATA interface for HDD connection, Support upto 6TB capacity for each HDD, Smart search for efficient playback.(Make: Hikvision/Dahua/Panasonic) 186 Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse.All including suitable camera stand and accessories. (Make: Dahua/Panasonic) 187 Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Dome Each Cameras, 1/2.8 CMOS,4 MP 2592 x1520 or better , triple stream, Min. Illumination required 0.005 Lux/F2.0 (Color,30IRE), 0 Lux/F2.0 (IR ON), 140dB True WDR, triple stream,3 to 12 mm, F1.4 to 2.8 , MFZ, Backlight Compensation, Highlight Compensation 3DNR, Privacy Mask, Internal/External Smart IR LEDs with up to 50m IR distance, H.265& |MJPEG, Inbuilt Video Analytics: Smart Motion Detection, Intrusion Detection, People Counting, Multiloitering, Face Detection, Line Crossing, Missing Object detection, [Unattended Object Detection. THe camera shall have inbuilt cyber security FIPS Chipset.Audio Stream Full Duplex, 1TB SD card support, IP 67 & IK10, Alarm: 1 In & 1out, PoE, H.265 High Profile and MJPEG, PoE Class . Certifications: ONVIF Profile S,G,T & M compliant, NDAA 889 UL, CE, EN, FCC & RoHS compliant and with all accessories and as per detailed tender specifications. 188 Supply, Installation, Testing and Commissioning of 32 smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remotep) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). 189 Supply and Clamping of CAT 6 armoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant.Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylenev. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 190 Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point( Point to Point ) Crimping, Testing and arrangement charges. 191 Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. 192 Supply and Fixing of Rack with Accessories -Higher end 12 U Rack with LNS unit and fan extra for the above rack. 193 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 194 PA SYSTEMS 195 Supply,installation, testing and commissioning of 30W High efficiency ABS horn loudspeaker with weather protectin IP 65Max Power : 45 W, Rated power, 30 Watts, Power tapping, 30/15/7.5W-Effective frequency range (-10 db) (-380 Hz to 5 kHz) - SPL at rated power (1 khz) 126 dB- Self extinguishing acc. to UL 94 VO - IP 65 acc. to IEC 60529, safety acc. to EN 60065. (Make - BOSCH) 196 Supply, installaion, testing and commissioning of 240W mixer amplifier with following features : inbuilt bluetooth for audio streaming, sports audio playback from USB pen drive, 4 microphone/line inputs, plus music source input, insert features to use as a pre/power amplifier, Optional 2 tone chime generation for input 1 technical specifications - Frequency response 80 Hz to 18 kHx (+1/-3 dB W - 10 dB ref. rated output) - Distortion <1% @ rated output power, 1 kHz bass control Max +/- 8 dB Treble control max +/- 8 dB. (Make - BOSCH) 197 Supply, installation, testing and commissioning of Goose Mic 198 Supply and installation ofHandheld microphone with a dynamic transducer element that shall be designed for high speech intelligivility. It should have a rugged enclosure is both stylish and easy to use in a wide range of public and sound reinforcement applications. Polar Pattern unidirectional, frequency range 80 hZ to 12 kHz, Sensitivity 1.7mV/Pa +/- dB, Rate out impedance 600 Ohms. (Make BOSCH) (Market rate) 199 Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers. 200 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 201 Supply and erection, testing and commissioning of 2.0 TR (6000K.cal/hr) ABS Split type Air conditioner (3 star rating)confirming to IS : 1391(part-2) 1992 with Admt No.1 fitted withhermetically sealed air compressor operating on refrigerant R-410A suitable for wall mounting for operation on 230V 50 HZsingle phase AC supply inverter technology with capable of thefollowing performinga) Coolingb) Dehumidifyingc) Air circulatingd) Filteringe) Refrigerant pipe lines – 6 mtr lengthThe installation works for the above split type AC units includethe following1. Mounting / fitting indoor and outdoor units at theirrespective locations2. Laying refrigerant pipe line of required length notexceeding 6 meters distance & connecting both units afterdrilling hole/holes in the wall is required, thickness of the coppertubing shall not be less than 0.7 mm3. Installing the section pipe with expanded polythene foamtubing4. Laying drain pipe to throw out the condensate water beingformed within indoor unit5. Leak testing the entire system unit6. Charging refrigerant gas in the unit7. Suitable electrical wiring with to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoorunit upto 6 meter length and upto switch within 3 meters oflocation of indoor unit. (Like (Carrier / Voltas / Blue Star /Equivalent) as directed by the department officers 202 Supply and fixing of 5 KVA slim and wall mounting (V Guardmake ) double booster voltage stabilizer for operation on 170-230V 50Hz single phase AC supply capable for 2 TR split ACwith necessary inter connection and earth connection as directedby the departmental officers. 203 LANDSCAPE 204 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 205 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 206 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 207 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 208 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 209 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 210 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Tamil Nadu View Result →
36.
Public Administrative Department #10211538 Price Bid
annual repair and maintenance of Urban Water Supply Under Sd-I Phed, Apwd, Prothrapur During 2024-25.Sub Work:- Laboratory Testing Material District Water Laboratory, Water Treatment Plant At Lambaline. , Whatman Filter Paper- 1441-125-Size 41 , Silver Nitrate 25 G Lr Himedia- Grm408-25G-Size-25G , Laboratory Gloves Nitrile - Size 100 Pcs , Laboratory Bubble Face Shield Uv Protective - Size Unit , Hcl, Acid 500 Ml Emplura- 6175605001730 - Size 500 Ml , Edge Digital Ph Meter Hanna Hi2002-02-Hann Make , Heating Mantle 500 Ml 200 Watt-500 Ml Capacity , Silica Crucible 15 Ml-Size 15 Ml , Silica Crucible 15 Mo-Size 100 Ml , Digital Temperature Meter-Abron Make , Ammonia Testing Kit 100 Testa-Size Code Wt042a , Safety Googles Uv Shield-Size Code U40101 , Photo Cholorimeter-Abron Make , 200 - Pack Colilert - 18 For 100 Ml Sample (Consumables) , 200 - Pack Sterile 97 - Well Quanit-Tray/2000 Trays (Consumables)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Andaman And Nicobar Islands View Result →
37.
Housing Urban and Rular Development #10200585 Price Bid
Tender For Construction Of New Muthalvar Padaippagam At Bhakthavachalam Park, Chennai; 1 Civil Works 2 Dismantling removing the existing Reinforced Cement Concrete work etc., by using required mechinaries includingdisposal of unserviceable material, labour charges, as per direction of Engineer in charge. 3 Dismantling removing the existing Brick work etc., by using required mechinaries includingdisposal of unserviceable material, labour charges, as per direction of Engineer in charge. 4 Removing the existing ventilators,doors and windows including removal of frames ,hinges and fastenings arefully and stacking the same at site etc., complete. 5 Dismantling Floor finish and daddoing walls in cement mortar with mosaic tiles/glazed tiles/cuddapah slabs. 6 Carting away the surplus earth and debris to a lead of 5kgm.including Loading, unloading and dumping in the Corporation Land as directed during the execution. 7 Dismantling removing the existing closet, fitting, pipes, etc as per site., by using required mechinaries includingdisposal of unserviceable material, labour charges, as per direction of Engineer in charge. 8 Civil Works 9 Providing and constructing cast in situ hydraulic bored piles of specified diameter in M30 grade concrete using blended cement - slag cement with minimum cement content of 400kg/m³in accordance with the structural engineers drawings and directions, but exculding reinforcement including cost of mobalization of all necessary plants, equipments like piling rigs, temporary casing of appropriate length forsetting out cardinal points and the removal of the same, boring in overburden, using bentonite mud circulation technique or any other method dulythrough all strata upto the foundation level of piles etc., complete all as approved by the departmental engineer. Further include dewatering, placing concrete by tremie pipe method, disposal of bored material outside the site. Including Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing all the debris away from the site with out any extra cost as directed including the cost of all tools, plants, conveyance, all labour, lead and lift required etc .,Conducting standard penetration test to identify the refusal strata for atleast 1 pile in group and atleast 25% of piles, comparing with refusal strata as indentified in soil report and providing socketting into refusal strata by 1.00mt or into hard rock by 100% dia of the pile. (Length of pile for payment shall be measured up to bottom of pile cap). 10 Boring or chiselling through any obstacles, boulders, weathered rock, etc. Upto founding level of piles for seating resting or socketting of files. The rate quoted shall include demobilising the site with all plants, equipment, piling rigs, necessary personnel brought for piling work, including removal and transportation of debrise away as directed, cleaning and reinstating site to original condition as acceptable by the Architect on completion of piling work. 11 450 mm Dia 12 Carrying out initial working pile load test on specified dia piles as specified in IS:291 1 (Part 4). Includes all plant, equipment, machinery. Instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete 13 Earth work excavation for all foundations in all type of soils and sub soils to the required depth for Footings, plinth / grade beams, etc,. by mechinaries including manual excavation for the following type of soil / rock as per detailed specification. As per SS 20B as hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and including refilling 0 to 2.0m depth consolidation depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. 14 Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 300 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. 15 Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive ofgiving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12to a depth of 8 in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc., 16 Stage:1 Spraying Anti-termite treatement chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation. 17 Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth. 18 Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over. 19 Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12 to a depth of 8 around the building before laying the plinth projection.This holes has to be be closed after the treatment. 20 Supplying and Filling withM-sand in floor and others sub structures for 150mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of river sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification. 21 Construction of Wet Mix Macadam 150mm compacted thickness in two layers by providing , laying , Paving , and compactingofaggregate gradation satisfying to Table 400-13 of MORTH and satisfying the physical paraeteres as per MORTH Table 400-12, mixing in a Wet Mix Plant of 200 tonne capacity at OMC , carriage of mied material to work site and laid in sensorpavers to the required line and grade as per the drawing and compacted with vibratory roller of 8-10 tonne to achieve the desired density of 98% of Maximum dry density and as per the direction of the Engineer-In-Charge of work. 22 Providing and laying plain cement concrete 1 : 4 : 8 ratio of(1 cement , 4 sand and8 graded stone aggregate 40mm nominal size) in foundation and basement for 100mm thick including dewatering wherever necessary and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification. 23 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including C & U clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 24 For column footing plinth beam , pile cap staircase steps, piers raft beam raft slab etc., 25 For Plain surfaces such as RCC slab, Beam, Bed Block, waist slab, landing slab, lintel etc., 26 For square or rectangular column, boxing, sunshade etc., 27 Providing and Laying M 30 Standardised concrete Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by theEngineer-in-charge 28 Basement 29 GF 30 FF 31 Terrace 32 Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 33 Brick work in cement mortar 1:6(one cement and four sand) using fly ash bricks of size 230mmx110mmx70mm for foundation and super structure as per detailed specifications and as directed by the departmental officers 34 Ground Floor 35 First Floor 36 Terrace 37 Brick partition walls of 11.50cm thickness using best quality Fly ashbricks of size 9 x 4-3/8 x 2-3/4(230x115x76) in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) 38 Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc.. with cement Mortar 1:3 (1 of Cement : 3 ofP sand) according to the specification. The Rate including Cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 39 Plastering of 12 mm thick for Internal walls with cement mortar 1:4 (1 of cement : 4 of fine P.sand)according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 40 Plastering 12 mm thick for external surfaces with cement mortar 1:4 ratio (1 of cement : 4 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturers Specification with sponge finish (washed sand finish) all complete as per specification and as directed.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by theEngineer-in-charge. 41 Supply and painting oftwo coats of Plastic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer.Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations,transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge.(Internal surface) 42 Supplying and painting of2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations,transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 43 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete (M-0652) 44 Supplying and filling the sunken slabarea byBRICK-BATCOBA by adding CICO NO:1 or approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- AcrylicPolymer Based Waterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturers specification after entire completion of laying pipes, sanitary fittings etc.Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 45 i) Includingapplying two coats not less than 2 mm thick of TAPECRETE- AcrylicPolymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No.1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturers specifications and as directed. 46 Supplying and laying of Ceramic tiles of size 305 x 305 x 6mm for flooring approved make and quality with plain/colourwith base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 47 Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 48 Providing and laying factory-manufactured linoleum flooring in the form of Rolls in the size of 12192mm of length and 1981mm of wide with 2mm thickness which laying above in the vertified tiles using the adhesive the flooring shall be laid over a smooth, level subfloor using manufacturer-recommended adhesives, complete in all respectsRoll flooring shall be laid with butt joints; edges shall be cold-welded or heat-welded for seamless joints.Apply a coat of linoleum polish or sealant after laying (if uncoated variant is used). Proper rolling to remove air pockets and ensure bonding the rate is inclusive of all necessary material, labour, transportation etc asper standards. 49 Finshing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in cement Mortar 1:3 (one cement and threee sand ) 12mm thick mixed with water proofing compound conforming ti ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed withred oxide and water proofing compound including curing et,. complete complying with standard specification and as directed by the departmental officers 50 Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete. 51 Supply and laying with best quality the following materials of Machine Polished granite slab not less than 18 mm thick (Jet Balck) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge 52 Supplying and fixing plywood partition with Teakwood frames of75x50mm size and with 3mm thick commercial plywood fixedwith screws and nails including fixing in position with 4Nos of iron hold fasts 50x6x230mm size etc.,complete.(ISI STD) 53 Supply & fixing of Tamilnadu Logo & Symbols as per design & Elevation. 54 Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 55 Supplying and fixing UPVC windows of casement type Open from the profile the size of outer frame 60mm x58mm and shutter profileare reinforcement withGI/1mm125GSM and 100% Corrosion free,the profiles are multi Chambered sections with wall thick of 2mm. TheEPDM rubber covered with over all the edges of frame and shutter the shutter .will be provided with Espag multi power point locks and also it operates with Handle. The Corners and joint should bewelded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thk should be provided to the shutter and it should not allow leakege of water even at most ranging storms and should have key lockable action, security protective hinges , strong locking system and as per size for arresting noise and energyloss. The connecting mechanism between sash and windowshould be fixed to the wall with 100% packing with screws and silicon Packing all roundthe frames. The window should be got approved from the Executive Engineer before use on work. 56 Providing of 35mm thick factory made pre-laminated ABS(Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x32mm, reinforcedby 32 x 32mm - 2 Nos., for vertical made out of LVL(Laminated Veneer Lumber), core material of 32mm thickhigh density craft paper honey comb board, sandwiched onboth sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete forfinished item of work, complete complying with the standardspecification. The door shutter and frame should be gotapproved from the Executive Engineer before use on work. 57 FRP Door Sutter with FRP Door Frames along with vision panel (as per drawing) made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers. 58 Supplying and fixing UPVC Louvered Ventilators of from the profile the size of outer frame 60mm x58mm and shutter profile size of 60mm x 78mm both profile are reinforcement withGI/1mm125GSM and 100% Corrosion free,the profiles are multi Chambered sections with wall thick of 2mm.The EPDM rubber covered with over all the edges of frame and shutter . The Corners and joint should bewelded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thk should be providedin the Louvers.The window should be fixed tothe wall with 100% packing with screws and silicon packing all round the frames.The Ventilator should be got approved from the Executive Engineer before useon work. 59 FALSE CEILING WITH GYPSUM PLAIN TILES (600x600)Providing and fixing true horizontal level false ceiling using SAINT - GOBAIN GYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at 1200mm c/c max by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm(Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying with 12mm Gypsum plain Tiles as per stansdards 60 Providing & fixing of Brick Cladding in elevation as per drawing. The rate is inclusive of all necessary material , labour, transportation etc complete as per standards. 61 Supplying and Fixing of aluminium Dye Cast Letters of approved size and colour treatment processis achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes aluminium Dye Cast Letters 6 Size. Tamil Stainless Steel Letters 25CM 62 Supplying and fixing M.S.Grill gate of required size in two shutters with necessary iron members, gun metal cups and wheels 75mm dia. with fittings locking arrangements,etc., complete,including painting a priming coat of approved primer,etc., complete (The design of gate furnished is subject to alteration during execution.) 63 Supplying and Painting the wall with Texture Finish Paint including thorough scraping, clean removal of dirt, Primer. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) 64 GYPBOARD DOUBLE SKIN PARTITIONProviding and fixing of Gypsum Dry wall Double skin partition of 75 mm thick using SAINT - GOBAIN GYPROC or Equivalent make and the partition shall be of one layers of tapered edge 12.5mm thk Gyp board screw fixed with dry wall screw of 25mm at 300mm c/c to either side of 48mm studs. GI steel sections to be placed at 610 mm c/c in 50mm floor and ceiling channel 0.55mm thick having equal flanges of 32mm made of GI steel with joints staggered to avoid leakage through joints. Finally square and tapered edges of the boards are to be finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper and 2 coats of Drywall top Coat suitable for Gypsum upto primer level.As per India Gypsum Specs.Note: Angle Bead to be used at external angles to get straight line finish & protection from normal impacts. 65 Providing and laying water proofing treatment to vertical and surfaces for sunken portion of depressed portions of W.C., and the like consisting of :i) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) 2nd course of 20mm cement plaster 1:2 (1 Cement : 2 Coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) 3rd course of applying blown or residual bitumen applied hot at 1.7Kg per sqm of area. iv) 4th course of 400 micron thick PVC Sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm) 66 PLUMBING WORKS 67 Supply,erection and testing & commisioning of 3HP Submersible pumpset in the capacity of 6000 LPH @ 300Ft, max. total head of 350 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge.( Sump to OHT transfer pump) 68 Labour charges for the erection of submersible pumpset in borewell/openwell including fixingand jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. 69 Drilling of 6 dia vertical borewell so as to have a finished size of 6 dia borewell in boulder area to any required depth as decided by theincluding Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractors rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit etc. using only calyx rigs. 70 300mm 71 Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by V notch method. 72 Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992 73 200mm dia CS ( plain pipe) 74 150mm dia CS ( plain pipe) 75 Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers. 76 200mm dia CS ( plain pipe) 77 150mm dia CS ( plain pipe) 78 Supply and fixing in position whiteEuropean Water Closet of approved make with low level concealed flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directedby the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.URINAL WITH FIXING ACCESSORIES SET, SIZE - URS-WHT- 13253N 79 Supplying and fixing Wash Hand Basin of size 550 x 400mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia B Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass, wast couplingNipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers.(TheWash basin should be got approved by the Executive Engineer before use on works. 80 Supplying and fixing of CP Two Way Bib Cock with Health Faucet ,wall hook & one metre longflexibletubeincludingcuttingandmakinggoodthe wallswherever requiredetc complete.complyingwithstandardspecificationandas directedbytheDepartmentofficers.Thequalityandmakeofhealth faucet should be got approvedby Concern department Engineer before use on work. 81 Supplying and fixing the best quality approved make of SS heavy duty long body Tap including cutting and making good walls wherever required etc.complete,complying with standerd specification and as directed by the department officers. The quality and make of angular stop cock should be got approved by concern department engineer before use on work. 82 Supplying and fixing in position Mirror of size 600x450mm of approved quality and brand with necessary plastic back PVC frame with bottom stand using brass screws rawl plugs for fixing etc complete complying with standard specification and as directed by the Departmental officers.The colour of frame and quality of mirror should be got approved by the Executive Engineer before use on work 83 Supplying,installing,testing and commissioning of approved make CONCEALED STOP COCK for toilet including neccesary accessories etc,complete,works include making require size curout in wall,and fixing the control box property,redoing the same etc,complete the quality and make of concealed stop cock should be got approved by concern department Engineer before use on work. 84 Supplying and fixing CP angle cock with wall flange including cutting and making good the walls wherever required etc., complete complyingwithstandardspecificationandas directedbythe Engineer Incharge before use on work. 85 Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg ,10 kg /sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). 86 160mm Dia 6kg 87 110mm Dia 6kg 88 75mm Dia 6kg 89 50mm dia 6kg 90 Supplying andfixingPVC cowl of following size to vertical Soil/Waste pipes above terrace level. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge. 91 110mm dia 92 Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly limeconcrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) includingdismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ). 93 Constructing solid block masonry manhole various size of deep in cement mortar 1:3( 1 Cement: 4 coarse sand ) R.C.C. Raft & top slab with cement concrete 1:2:4, plain cement concrete 1:4:8 mixfor base course (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size )above that 150 mm thick RCC M25 raft slab inculding reinforcement 10mm dia 150mm c/c bothways. Plastering inside walls with 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), finished with a floatingcoat of neat cement ,supplying and fixing SFRC manhole cover with farame , PVC foot rest as per detailed drawing etc the quoted rate shall also necessary excavation and back filling etc complete.complete as per standard design : (the chamber and cover should be got approved by the Executive Engineer before use on works) 94 Manhole 600 x 600 mm internal size ( Depth up to 1000mm) 95 Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesivesand fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The CPVC pipes shall be got approved by Executive Engineer before use on works.Internal & Vertical 96 a) 20 mm dia 97 b) 25 mm dia 98 c) 32 mm dia 99 Supplying and fixing manhole cover with frame as per approved make ,cover weight and being size mentioned below and specified size in the drawing etc., including painting with two coats of anticorrosive paint over a coat of primer etc., fixing locking arrangements, fixing Man-hole over, grouting the anchors with CC 1:2:4 (one cement,two fine aggregate and four coarse aggregate), as complete in all respects complying with relevant standard specifications and as directed by theClient / Engineer-in-charge.Size:600x600mm 100 Supply & fixing of Bottle trap as per standards. BOTTLE TRAP (WITH INTERNAL PARTITION) 32 - ALD-CHR- 769L300X190 101 LANDSCAPING WORKS 102 Planting of Ixora hybrid foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inchincluding loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 103 Planting of Ficus black ornamentalfoliage shrub varietyof height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 104 Planting of Jasmine Plant foliage shrub varietyof height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 105 Planting of Travellers palm ornamental foliage Specimen plantvarietyof height 105-120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 106 FURNITURE WORKS 107 Linear type Workstation (1000mm(W) X 600mm(D) X 750+300mm(H)) as per below specificationTable Top: - Made of 25mm Thick E1 Grade Pre-Laminated Particle Board with 2mm PVC Edge Banding.Main Screen : -8mm Sandwitch Glass finishes of Sizes 1050x300mm htUnderstructure: - MS Square Leg cross-section of size 50 x 50mm is Made of Mild Steel 1.6mm thick CRCA Powder coated.MS Powder Coated horizontal Beams supported below the table top of Size 50*25mm. Rectangular Tube made of 1.6mm thick CRCA Powder coated.Raceways : -Vertical Raceways - 120 MM HT MS Powder Raceways Considered below the Table top With Intermediated legs considered for Wire Provision.Without Middle Cover.Wire Manager: - Wire Manager Hole considered. 108 Storage (Open Shelf) 1200mm 300mm 2100mmIs made 25mm top & all other panel 17 mm thick in prelam particle board finished in Laminate of approved shape, equal shutter 2mm thick edge banding finished. This also includes providing and fixing of hardware like locks, handles, spring loaded hinges etc 109 Supply of Chairs 110 ASPIRE MB (BLACK)* Black Backrest frame, Polished aluminum connected* Mesh back, Seat and headrest fabric* Height adjustable lumbar support with PU surface* Tiltable backrest (can be tiltable when locked inupright position)* 4D adjustable armrest with PU pads* Mould foam with plastic seat upholstery* Mechanism, with seat slide.* Chrome gaslift* Polished aluminum base with plastic cover,* 60mm nylon castors 111 * Versa Medium Back Mesh Chair* AN -70 Mesh* Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Armrests ( Height)* Nylon Base* Fabric Upholstered Cushion Seat 112 Meeting Room TableTable Top: -Made of 25mm Thick E1 Grade Pre-Laminated Particle Board with PVC Edge Banding,Understructure: - MS Leg 50mm 50mm is Made of Mild Steel 1.6mm thick CRCA Powder coated.MS Powder Coated horizontal Beams supported below the table top of Size 50*25mm.Raceways : Horizontal RacewaysMS Powder Raceways Considered below the Table top With Intermediated legs considered for Wire Provision.Wire Manager:- Flip Cover Considered. 113 Meeting Room Table (2400mm 800mm 750mm) 114 Cabin Main Table with Side Storage (Main Table 1500mm 750mm 750mm / Side Storage 1200mm 450mm 750mm)Side Storage 1200mm 450mm 750mmTable Top: Main and Side Table Made of 25mm Thick E1 Grade Single Top PLPB with 2mm PVC Edge Banding,Understructure: MS Square 50mm Steel 1.6mm thick CRCA Powder coated.MS Powder Coated horizontal Beams supported below the table top of Size 50mm x 25mm.Flip Cover : Flip Cover 400*143mm Made of AluminiumWire Manager: Wire Box with Socket Plate and Vertebra considered for wiringModesty : Front & Side PLPB Modesty Panel . 115 Librarian TableMain Table 1100mm 440mm 750mm 116 3 Seater Sofa with Table 117 INTERACTS-902 (Leatherette)3 SeaterSize : 1810 (W) x 720 (D) X 740 (H)Made off : the sofa is made of fine quality leatherrite (3s = 8.0 mtr,2s = 6.8 mtr, 1s= 5.3 mtr), the structure is made from silver wood& pine wood, 32 & 40 density foam is used which is covered withroll poly filling for giving comfort and extra softness to sofa. Extra(kangaro company)Legs : are made of stainless steel.Color : Black 118 ELECTRICAL 119 TNEB METER BOX 120 Supply andfixng of TNEB meter board suitable for 3phase100A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2 feet using angle iron of size1-1/2x1-1/2x1/4rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.100A fuse units (500V), 1No .neutral link,copper earth flat of size1x1/4with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete. 121 M.S. Enclosure (IP65): Supply, Erection , Testing and commissioning of the followingtype M.S. powder coated enclosure for housing the Meteringing service, whch should be made outof16SWG enclosure with provision for cable entry, with Outdoorapplication IP65 as specified Protection, fixed on the wall/Floor withall accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth etc. 122 MAIN Panels 123 MAIN Panels:Supply, Installation, testing and commissioning of 3Phase, 415Volts, Main LT Panel board of Indoor, Cubicle floor mounting type made out of14 SWG CRCA sheet steel with powder coated finishing, MS base frame, double internal earthing arrangements, 100Amps, rating TPN Copper busbars and Earth bar with interconnection busbar, etc., comprising of the followings:EB Incomer :1 No. 100Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOMDG Incomer: 1 No. 100Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOMCommon C/O Incomer: 1 No. 100Amps, 4Pole Automatic Changeover Switch with EB ON and DG ON LED Indication lampsMetering : 2 Set of RYB LED Indication lamps2 Nos. of Multifunction Meter with RS 4852 Set of Current Tranformers (200/5A, Cl-1), 1 No. 200/5A CT for APFCR2 Set of Control MCB and Electrical Interlocking between EB & DG Incomers Outgoings: 3 Nos. 63A, 25kA, TP+N, TM MCCB with Ext. RHOM (APFCR &AC)4Nos. 32A, 25kA, TP+N, TM MCCB with Ext. RHOM (Lighting & Spare),6Nos 32A DB MCB inclding all labour Charges And Transports Charges. 124 APFC PANEL: Supply, installation, testing and commissioning of 25 KVAR Automatic power factor correction panel ( APFC ) with 8 steps of capacitor switching cubicle type, free standing, Powder coated, 14 SWG CRCA sheet steel,enclosed separate compartment for each capacitor, front operated, indoor type dust and vermin proof, hinged, lockable doors, electrolytic grade aluminium bus bars, with SMC /DMC insulator supports, Digital volt meter, Ammeter with selector switch, 8 stage Digital Automatic power factor correction,( APFC ), Auto / Manual selector switch, cluster LED typeindicators, in the incomer,complete with electrolytic grade aluminium bus bars, MPP type Power capacitors, with 5 KVAR x 3 no. 3 KVAR x 2 nos. 2 KVAR x 1 nos. 1 KVAR x 2no. Contactors, MCCB’s, start, stop, push buttons, internal wiring, colour coding, ferrules, cable gland plates, Aluminium earth bus for the entire length of the panel with bonding to earth and painting,Panel mounting MS Channels, fasteners, etc., including all associated control wiring and interlocking circuitry, Main panel sensing CT interconnecting wiring etc., all inclusive. 125 Supply, Installation, testing and commissioning of 1 x 58.5KVA, Silent type Diesel Generator Set with AMF Panel complete with suitable size Acoustic enclosure CPCB IV and BIS. Diesel Engine suitable for Generator application, developing 1500RPM with an overloading capacity of 10% for one hour in any 12 continuous hours operation generally confirms to BS:5514, directly coupled to 58.5KVA at 0.8 Power factor, 415V, 3Phase , 4wires, 50cycles per second self excited, self regulated, with brushless excitation, Alternator generally confirms to BS:5000/IS:4722. DG set shall be complete with radiator, residential type silencer, electronic governor, cable termination box, MS mounting frame, fuel piping, diesel day tank, 24VDC Battery, Battery mounting frame, oil level indicator with gauge board, andall other accessories as per standard specifications.Diesel Generator set shall be mounted on cushy foot or similar type of vibration Isolators. The cost of Exhaust pipe shall be included in this item with Sutable concrete Base at M30 Grade. The DG Set shall be suitable for auto-mains failure startand auto / manualoperations.The DG Should be supplied with Auto-Start-Stop Control panel with suitable rating switchgear 126 DISTRIBUTION BOARDS 127 Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCBswitch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wallwith earth connection only.Higher End 128 Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution boardwith double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB asoutgoing in flush with wall with earth connection only. Higher End 129 Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm.with the following in flush with wall with earth connection only. i. 63A 4P MCB - 1 no.ii. 63A 4P 30MA RCCB/ELCB - 1 no.iii. 63A DP MCB Isolator -3 nos.iv. 6A to 32A SP MCB - 12 nos., 130 Supply and Laying of 3 1/2x 70 sq.mm. PVC armoured LTUG cablein suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 131 Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection. 132 Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. 133 Run of Mains 134 Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. 135 Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion. 136 Supply and Run of 2 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. 137 Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion. 138 Point Wiring 139 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) Higher End Primary Point. 140 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator)Higher EndSecondary Point. 141 Switch & Sockets 142 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 143 Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 144 Supply and fixing of 1 no.6/16A two modulesocket , 1 no.16A one module switch with module cover plate (plastic) on Suitable module concealedBox (GI ) in flush with wall with connections. Higher End 145 Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) 146 Air Condition 147 Supply & Instalation of Air-Conditioner with Copper Coil 2.0 TR Split Type AC Unit - 5 Star Rated, 5 KVA capacity Automatic Voltage Stabilizer with time delay relay, 5/8” and 3/8” copper pipe (Extra beyond 3 metres supplied with AC unit), Inculding MS stand for fixing outdoor unit. 148 Supply and fixing of Copper Refrigerant Piping of 3/8 dia and 5/8with Pipeline nitrle rubber insulation with 50mm PVC water drain pipe line with Non Adhesive Cotton Roll insulation and 3 core Power cable from indoor to Outdoor unit. 149 Supply and fixing of 450mm (18) Wall mounting 5 star rated complete (Higher end) with necessary accessories and hardwares as required. 150 Supply and fixing of 300mm (12) sweep(Heavy Duty) AC exhaust fan complete with necessary wall opening and making good of the wall . 151 Supply and fixing of louvers shutters arrangements for 300mm (12) sweep AC exhaust fan 152 Supply and fixing of 24W LED 2x2 square type Recessedfitting with LED (Higher end) on false Ceiling with suitable hanging support from ceilingwith PVC unsheathed copper leads from terminals to the fitting 153 Supply and fixing of 18W LEDRound type Recessedfitting with LED (Higher end) on false Ceiling from ceilingwith PVC unsheathed copper leads from terminals to the fitting. 154 Supply, installation, testing and commissioning of36 W, 900mm diaCircular LED pendantlight fitting, made out of CRCA powder coated body, aluminium reflectors,poly methyl meth acrylate (PMMA) diffuser, glare free light, suitable for recessed mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive. KL 3232 155 Supply and fixing of28Watts GATE FIXTURE FITTINGwith cool day light suitable for wall / roof sheet mounting, made outCRCA powder coated body,IP65 aluminium reflectors,poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.(Klite/Millenium/Bajaj Equivalent) 156 Supply and fixing of 8W Light fitting (IP67) Inground fixture with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (Klite/Millenium/Bajaj Equivalent) 157 Supply and fixing of MIRROR Light 20W LED Batten 158 Supply and erection of Canon Digital Photocopier (Xerox) Machine IR-3300 / 3235Type of Product : Laser Multi functionalCore Functions: Print, Copy, Scan & SendFirst Copy Time:3.9 SecMultiple Copies :1 to 999 SheetsPrint Speed :45ppmThe laser beams engrave the image or text that you have sent to print on the surface of the drum. When using a copier this process is done using light, the light scans the page required for printing and converts it into an image 159 Supply and erection ofAll-in-one Desktop of HP 27-cb1456in Core i5 (8GB DDR4 /Windows 11 Home/27 Inch Screen/27-cb1456in) with 600VA UPS, Keyboard, Mouse,27 inches, 11th Gen Intel Core i5-1235U6 x 1.8 GHz (Turbo Speed upto 4.2 GHz) Cores Hexa Core, 12 Threads, 18 MB Cache, UHD Graphics 730 Graphics, 8 GB DDR4 RAM Smallest and 512 GB SSD.Ethernet (LAN), HDMI, Multi Card Reader,WiFi, Bluetooth v5.03 x USB 3.0, 1 x USB Type-C and Inbuilt Microphone 160 PRINTER: Supply, installation, testing and commissioning of HP Smart Tank 790 WiFi All-in-One Printer Duplexer with ADF and Magic Touch Panel Inkjet Colour printer, print speed 11-20 sheets with multiple features like print, scan, copy, fax, multi-port connectivity (Hi-speed USB 2.0, Wifi, Bluetooth LE , 1 USB Host, LAN) , 2.4/5G dual band Wi-Fi, Wi-Fi Direct, mobile printing capability, etc 161 Supply, installation, testing and commissioning of Long Range Wifi Device of following Specification: Networking Interface: (1) GbE RJ45 PortPower Method: PoE+, Pasive poE(48V) Max TX power: 2.4 GHzAntenna gain: 2.4 GHzMounting: Wall or Ceiling MountingWifi Satndards : 802.11a/b/gWireless security: WPA-PSK, WPA- Enterprises(WPA/WPA2/WPA3)VLAN: 802.1Q Concurrent Clients: 300+ 162 CCTV 163 Supply, Installation, Testing and commissioning of 16 channel 2 SATA NVR, with 6TB Hard Disk Drive 2 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected,Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony. 164 Supply of 4MP, Internet Protocol fixed BULLET CAMERA/DOME CAMERA (INDOOR & OUTDOOR)with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. with Camera Stand and camera fixed connecting box. (Make: Dahua/Panasonic) 165 Supply, Installation, Testing and Commissioning of 32 smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN (Make: Sony/ LG /Samsung). 166 Supply and Clamping of CAT 6 unarmoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. ii)Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 167 Supply and Fixing of Rack with Accessories -Higher end9U Rack with fan extra for the above rack. (Amp/NVR/POE) 168 Supply and Fixing of Rack with Accessories -Higher end4U Rack with fan extra for the above rack. (speaker/data/cctv) 169 Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK) 170 Supply and fixing of POE 8 port switch with two uplink port, 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK) 171 Supply and fixing of outdoor4X6PVC box with 102mm x 77mm x 102mm with all fixing accessories. 172 Supply, Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges. 173 Supply and Installation for 1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up and battery stand . 174 Supply, Erection of 6mLengthpole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges. 175 VOICE & DATA 176 Supply, Fixing and Termination ofRJ 11 Single Point ( Point to Point) Crimping, Testing and arrangement charges. 177 Supply & Installation of CAT 6 PVC Module Box I/o socket & face plate single socket Erection and arrangement chargers (Higher end) 178 Supply and fixingofLAN Network Switches Un-Managed 10/100/1000 - 24 Port and 24 Port Patch Panel- Unloaded erection and arrangement chargers. 179 Supply, runing, testing and commissioning of2 Pair Unarmoured 0.5mm Telephone cable in suitable Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour. 180 PA SYSTEM 181 Supply, Installation,Testing & commisioning of 15W Wall Speaker 2 way high efficiency, high fidelity, long throw IP65 weather proof P.A Music Horn speaker. It combines the high efficiency of horn with wide frequency response.Music horn is weather protected and UV protected ABS plastic housing combines with the feature of easy poertap selection on a terminal strip with a two core cable.It has impedence of 250/500/1k/2k ohm with frequency response of 120-16000 hertz. (Make:AhujaAMH402T/Bosch or its equivalent) 182 Supply, Installation,Testing & commisioning of 120 watts P.A Mixer Amplifier with the output power of 120 watts maximum 160watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 wattsRMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000/Bosch) 183 Supply, runing, testing and commissioning of2Core x 1.5sq sqmm PVC insulated un Armoured Speaker Cable in suitable 20mm dia Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour. 184 Earthing 185 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 40mm withcopperearthplateofsize125mmx50mmx6mmwithnecessaryfunnellingarrangementswithnecessary masonry work and with 38mm RCC cover slab for the brick masonry 186 Supply and erection of 17.2mm, 3mtr long, Copper Bonded earth rod with backfill compound, including civil worksof base PCC for chamber andheavy duty Chambercover,, heavy duty chamber cover, etc., as per IS 3043 standards 187 Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection 188 Supply and Run of1 of No.8 SWG copper wire for earth connection 189 Supply and Run of1 of No.8 SWG copper wire in suitable PVC rigid pipeon wall / floor / ground for earth connection 190 Supply of 2mx1mRubberMatsuitablefor11KVinstallation confirming to IS(5 Nos) 191 Supply of First Aid Box complete with all First Aid Medicines 192 Supply and fixing of Shock Treatment chart with Glass frame 193 Supply and fixing of4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle 194 Supply and fixing of Fire Extinguishers Co2, 4.5Kg confirming to TAC norms 195 Supply and fixing of Metallic Danger Board as required by the Electrical Authorities 196 METAL SIGNAGE BOARDS: Supply and fixing of metal signages for the following:1. Mudhalvar Padaipagam text in Tamil of size 20 x 15with backlit LED placed over the base, fabricated using stainless steel sheet of minimum 16G thickness brush finish of required size and colour as required. 197 LOGO SIGNAGE BOARD 198 LOGO SIGNAGE BOARDS: Supply and fixing of acrylic signages for the following:1. Mudhalvar Padaipagam logo of size 2 x 22. CMDA logo of size 2 x 33. Directorate of Public Libraries logo of size 3 diawith backlit LED placed over the sun board base, SIDE EDGES(4): 5mm transparent white acrylic sheet with laser cut & 4inches manual raising all around with details. ACRYLIC SHEETS & ITS TECHNICAL PARAMETERS:Front: a. 5mm Imported (Mitsubishi/equivalent) acrylic cutting on laser cutting machine.b. Flexi bond make 25mm Sun board for the back of the logo.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
38.
Drinking Water Supply and Sanitation #10163068 Price Bid
Supply, Delivery, Installation And Trial Operation Of Electro-Mechanical Components And Allied Works At Ground Water Based Tubewell No-I , Ii And Arsenic Iron Removal Plant At Mabarakpur Piped Water Supply Scheme In The District Of Malda-3 Submersible Pump Directly Coupled With Water Proof Suitable Size Motor Having Following Specification:Pumpshaft- Stainless Steelimpeller- S.S / Gmoutlet Size-65 Mmmotorsubmersible Type 3 Phase, 50 Hz, 415V ± 10% , 2900 Rpmmotor Mustbe Suitable For Operation With Star-Delta Starter This Item Will Be Procured Based On Yield Test Report Of T / W And Best Efiiciency Point As Per Direction Of Eic. Test Certificate Along With Characteristic Curve Shoule Besubmitted At The Time Of Delivery. 4 For T / W No. I & Iidischarge Of Clear Water = ( Q ) = 33 M3 / Hr.Total Head ( H ) = 35 M. 5 1.1 Kv Grade 2.5 Sqmm 3 Core Water Proofflat Submersible Cable For Above Motor. 6 1.1 Kv Grade 16 Sqmm 4 Core Xlpe Insulated Al. Ar. Cable Cable Conforming To Is-7098 ( Part-1 ) 1988 With Upto Date Amendment. 7 Supply, Delivery And Storage At Site Of Wall Mounted 2 Mm. Thick Epoxy Painted Sheet Steel Enclosed Front Open Fully Panel For Fully Automatic Cum Manual Control Centre For Operation Of The Pump Motor In Dol Mode, Actuator With Dol Starter, Chlorinator With Dol Starter And Timer Operated Outdoor And Indoor Lighting And Also Spares Feeder As Per Approved Drawingand Nit Specification. 8 For T / W No. I & Iirange Of Pmcc Panel:5 Hp To 7.5 Hp Dol 9 Supply And Delivery Of The Following Valves, Pipes, Gauges Etc. At Site Of T / W No. I & Ii. 10 80 Mm Dia M.S. Seamless Column Pipe ( Black ) 6.8 Mm To 7.1 Mm Thick With 150 Mm Long Heavy Type Socket At One End. 11 3.00 Mtr. Long Excluding Socket Having 8 T.P.I. Thread. 12 1.5 Mtr. Long Excluding Socket One End Having A Thread Of 11 T.P.I. & The Other End Having A Thread Of 8 T.P.I. 13 Heavy Type Suitabledia Ms Suspension Clamp Along With Nuts Bolts And Washer. 14 Cast Iron Wafer Type Three Phase Actuator ( Rotork Range, Three Phase 415 V, Multiturn Electrically Actuated ) Operated Butterfly Valve Of Dia 80Mm ( P.N-1.0 ) As Per ( Is-13095 Ip-68 ) Test Certificates From Both The Manufacturer Are To Be Submitted At The Time Of Delivery 15 80Mm Dia Cidf Sluice Valve-1 No., Non Return Valve-1 No., Cidf 90° Bend-1No., Ci Flanged Tee-1No. Blank Flange-1No., Ci / Ms Flanged Short Piece 0.50 Mtr.-2 Nos, Ci / Ms Flanged Pipe 1 Mtr.- 2 Nos. Etc As Per Is Specification And Certification For Construction Of Delivery Pipe Line And Wash Out Line. 16 Heavy Type 250 Mm Dia Split Type Tube Well Cover With 12 Mm Thick Clamping Arrangement Including Holes Of Column Pipe, Air Pipe And Cable Entry With 2 Sets Heavy Type Suspension Clump, Nuts, Bolts And Washer As Per Departmental Design. 17 Depth Gauge 100Mm Dia With Steel Air Pipe Of Required Length With All Accessories For The Above Work Including Supply Of Good Quality Hand Pump. ( This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ) 18 Pressure Gauge ( H.Guru / Febig ) 150Mm Dia ( 0-7Kg / Sq.Cm ) Brass Cock And Fitting Complete. ( This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ) 19 50 Mm. Dia. Non Metalic Pipes ( Is:14930 ) And Specials For Protection Of Submersible Cable ( As Per Site Requirement ) 20 Anti Snapping Safety Device For Pump Set By Supplying Suitable Size Ms Clamps Two Sets And Nylon Rope Of Required Length Including Supplying Of Nuts, Bolts And All Other Materials. 21 100 Amps Porcelin Based Rewireable Type Male Female Kit Kat Fuse Unit 22 100 Amp 415 V Rewireable Type Tpn Main Switch. 23 Laying Of 16 Sq. Mm. 4 Core Al. Ar. Cable In Wall / Floor By Supplying Of All Necessary Materials As Per Ie Rules And As Per Direction 24 Installation Of The Materials ( To Be Supplied Under Above Sl No 1 To 3.01 & 5 To 6.13 ) Such As Pump Motor Set With Column Pipes, Valves, Panel, Fiting Fixing Pressure Gauge, Depth Gauge, Non-Return Valve & Drawing Delivery Out-Let & Washout Line With The Supplied Specials / Accessories By Providing Antisnapping Cage Of Suitable Size Including Supply Of Cable Gland, Sockets, Wooden Board, Control Cable Etc Including Brick, Sand, Cement Rod Etc As Required To Complete The Job As Per Direction And Up To The Entire Satisfaction Of The Eic. 25 Making Brick Pillar 0.25 Mtr X 0.25 Mtr. For Supporting Of Valves And Pipes With 12 Mm Thick Plaster And Net Cement Finish Complete. 26 Supply, Delivery Of M.S Kiosk Box Of 661Mm X 559 Mm ( Lxw ) Size Having Thickness Of 1.5 Mm With Angle Support At Four Legs Having Hight Of 661 Mm With Provision Of Locking Arrangement, Supply Of Lock, Cable Entry Point Incl Painting By One Coat Of Black Paint Over One Coat Of Primer All Complete. 27 Making Suitable Size Pump Foundation Including Erection Of Kiosk Box With Supplying Of Necessary Cement, Sand And Stone Chips Including Plastering And Net Cement Finish Complete. 28 Making Double Earthing Arrangement In Compliance With Ie Rules By G.I. Pipe Electrode Of 50 Mm. Dia 3 Mtr. Long 2 Nos For Panel And Pumping Machinery 25 Mm. X 6 Mm. G.I. Earth Strips From Earth Pit To Panel And All Other Accessories Required To Complete The Work. 29 Making Internal Electrification Of Pump House Consisting Of Two Bracket Point, One Tube Light Point, Two Bulk Head Point, One Fan Point And 1 No. 74 Watt Led Fixture With Arm Bracket At Outside And One Three Pin Plug Point Including Supply Of All Necessary Materials To Complete The Work As Per Ie Rules And As Per Direction ( All The Fittings And Lamp Should Be Led Type As Per Choice Of Eic ) 30 Supply And Delivery At Site 3 Phase Oil Cooledtype Servo Motor Operated Copper Wound Line Voltage Corrector Conforming To Is-9815 ( Pt.-1 ) -1994 Suitable For Un-Balanced Input Voltage Phase To Phase 200V.-500V Including First Filling Oil As Per Is-335 Where Applicable As Per Approved Drawingand Nit Specification. 31 For T / W No. Ii15 Kva 32 100 Amp 4 Pole On Load Change Over Switch 33 100 Amp Re Wireable Type Tpn Main Switch 34 100 Amp 4 Way Cu Basbar Chamber Box By 16 Swg Sheet Steel Enclosure Including Porcelain Chair Etc.With Painting As Per Direction Of E.I.C. 35 1.1 Kv Grade 415 V, 16 Sqmm, 4 Core Pvc Insulated Aluminiumarmoured Cable. 36 Making Brick Built Foundation With Supplying Of All Required Materials Suitable For The Above Voltage Stabilizer By ( 4:1 ) Cement Mortar Including Holding Down Foundation Bolts And 12 Mm Thick Plaster With Neat Cement Finish, Sloping All Complete As Per Direction Of Eic. 37 Fitting , Fixing Of Change Over Switch, Busbar Chamber And Main Switch As Mentioned In Item No. 17.02, 17.03 And 17.04 On The Iron Angle Frame Of Suitable Size Fixed At Suitable Position On Wall By Supplying All Necessary Fixing Materials All Complete As Per Direction Of Eic. 38 Installation Of The Above Voltage Stabilizer As In Item No.17.01 On The Foundation Including Making All Connection Complete As Per Direction. 39 Drawing And Connection Of Cable As In Item No. 17.05 On Wall / Surface From Change Over To Panel Via Voltage Stabilizer, Bus Bar And Main Switch Incl. S & Fitting-Fixing Of Required Nos. Of Ms Saddles With Earthing Attachment In 10 Swg Gi ( Hot Dip ) Wire, Making Holes Etc. As Necy. Mending Good Damages And Painting. 40 Making Joints Of The Cable By Supplying Compresion Type Gland Thimple, Socket Etc. As Per Requirement And As Per Direction Of Eic. 41 Double Earthing The Whole Installations Complying With Ir Rules Including Supplying Of All Necessary Earthing Materilas For Voltage Corrector Device To Complete The Job As Per Direction Of Eic. 42 Supply & Delivery Of Automatically Controlled 0-100 Lph Diaphargm Type Chlorinator For Accurate Dosing Of Chlorine Solution Into The Waterby Connecting Metering Pump ( Diaphragm Type ) Having Specification As Per Nit:- ( Including Making Provision For Inlet Line To The Actual Storage Tank Of Dosing Solution Of All Materials. ) [ Test & Warrantycertificatesare To Be Submitted At The Time Of Delivery ] 43 Installation Of Above Supplied Chlorinator Including Supplying Of Suitable Capacity Main Switch ( Havells ) Starter & Drawing Of Power Line By Supplying Pvccopper Wire & Continuous Earthing. This Include The Cost Of All Necessary Foundation ( At Least 200Mm Height ) With Concrete Mixture ( Sand, Cement, Stone ) And Neat Cement Finish By Supplying Of All Required Materials And Testing The Entire Set By Supplying Necessary Chemical For At Least 04 ( Four ) Hourstrial Runas Perentire Satisfaction Of The Eic. 44 Supply And Delivery At Site Of Calcium Hypochlorite Granules Minimum Cl Content 60%-65% In Air Tight Plastic Jar ( 25 Kg Each ) As Per Direction Of E.I.C. ( Make- Phe Approved ) . 45 Supply & Delivery Ofmoulded Chair. 46 Supply & Delivery Of The Moulded Table. 47 Supply, Delivery & Installation Of The Following Fan As Directed By Eic. A ) Ceiling Fan 1200Mm Sweep Or B ) Wall Mounting Fan 400 Mm Sweep Including Fan Clamp As And When Required. 48 Commissioning Of The Installation With Full Satisfaction Of Eic And Trial Run As Per Departmental Operation & Guarding By Engaging Skilled Staff For 3 Months. ( Tw No - Ii ) 49 Part-B:Arsenic Iron Removal Plant 50 Supply, Delivery And Storage At Site Of Horizontal Split Casing Centrifugal Pumping Machineries With Baseplate, Flexible Coupling, Coupling Guard, Foundation Bolt Etc. Having The Following Specification : ( Pumps Suitable For Plc Operated Unmaned Operation Facility And Pumping Water From Cwr To Ohr ) Discharge :- 70 M3 Per Hour Generated Head :- 40 Mwcthis Item Will Be Procured Based On Yield Test Report Of T / W And Best Efiiciency Point As Per Direction Of Eic.H-Q-P Curve Of Pumps In Test Bed Has To Be Submitted During The Delivery. 51 Supply, Delivery And Storage At Site Horizontal Foot Mounted Induction Motor Suitable For The Pump Duty Mentioned Above In Item No. 32.00 With Adequate Margin Conforming To Ie 3 Energy Efficient, 1440 Rpm, Ac, 3 Phase, 50 Hz. + / - 5%, 415 V + / - 10%, Class F Insulation With Temperature Rise Limit To Class B Insulation, Ambient Temperature 50 Degree Centrigade, Ip 55, S1 Duty As Per Technical Specification.Routine Test Certificate Of Induction Motor Has To Be Submitted During Delivery 52 Supply, Delivery And Storage At Site Of Monoblock Vacuumpumping Machinary With The Following Specification And As Pernit. :A ) Vacuum : Upto 600 Mm Of Hgb ) Air Flow Rate :1.8 To 20.5 M3 / Hr 53 Supply, Delivery And Storage At Site Lift Type 150 Mm Footvalve Combined With Stainer As Per Is : 4038 Pn-1.6 And Asper Detail Given In The Nit . :-N.B. : Test Certificate To Be Produced For Each Valve ( At Suction Side Of Pump ) 54 Supply, Delivery And Storage At Site 150 Mm Diadouble Flanged Cast Iron Manually Operated Non-Rising Spindle Sluice Valve Generally Conforming Tois:14846 Pn-1.0.:-N.B. : Test Certificate To Be Produced For Each Valve. ( At Suction Side Of Pump ) 55 Supply, Delivery And Storage At Site Of Ci Doble Flanged Single Door Swing Check100 Mm Dia N.R.Vas Per Is : 5312, Part-I, Pn-1.0. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Delivery Side Of Pump ) 56 Cast Iron Wafer Type Three Phase Actuator ( Rotork Range, Three Phase 415 V, Multiturn Electrically Actuated ) Operated Butterfly Valve Of Dia 100 Mm ( P.N-1.0 ) As Per ( Is-13095 Ip-68 ) Test Certificates From Both The Manufacturer Are To Be Submitted At The Time Of Delivery ( At Delivery Side Of Pump ) 57 Supply, Delivery And Storage At Site 150 Mm Diadouble Flanged Cast Iron Manually Operated Non-Rising Spindle Sluice Valve Generally Conforming Tois:14846 Pn-1.0.:-N.B. : Test Certificate To Be Produced For Each Valve. ( At Common Delivery Header ) 58 Supply, Delivery And Storage At Site 80 Mm Diacast Iron Kinetic Double Orifice Air Released Valve As Per Relevant Is, Pn-1.0. :-N.B. : Test Certificate To Be Produced For Each Valve. ( At Common Delivery Header ) 59 Supply, Delivery And Storage At Site Ms Dismantling Joint Dn 100 Mm Pn 1.0 ( For Delivery Side Ofpump ) 60 Supply, Delivery And Storage At Site Ms Dismantling Joint Dn 150 Mm Pn 1.0 ( For Common Header Ofpump ) 61 Supply, Delivery And Storage At Site Bourdon Type Pressure & Compound Gauges, 150 Mm Dia Cast Aluminium Dial With , Ss Internal, Dn 15 Gi Impulse Line With Three Way Cock.Pressure Guages ( 0 - 15 Kg / Cm2 ) 62 Supply, Delivery And Storage At Site Of150 Mm Dia , Thickness 5.4 Mm And 100 Mm Dia 5.4 Mm Thick Ms Black Pipe Conforming To Is:1239 Part-1 ( 2004 ) ( For Suction, Delivery & Delivery Header ) Along With Necessarybends, Fittings Viz. Flanges, Bolts, Nuts, Gaskets , 150 Mm X 100 Mm Ecentric Reducer, Concentric Enlarger80x100 Mm Etc. As Reqd. To Make The Installation Complete In All Respect. 63 Supply, Delivery And Storage At Site 20 Mm Dia, G.I Pipes ( Medium Duty ) , Water Storage Pvc Tank , Bends, Sockets, Tees, Fittings, And Other Specials, Gaskets , Solenoide Valve , Gate Valve For Auto & Manual Operation Etc. As Reqd. To Make The Piping Arrangement Of Vacuum Pump Complete In All Respect As Per Nit. ( For Priming Arrangement ) 64 Supply, Delivery And Storage At Site 2 Mm. Thick Crca Sheet Steel Enclosed Cubical Type Indoor Floor Mounted415 Volt Mccpanelhaving Required Feeders With Plc. Incomer ( 250 A ) - 1 No, Outgoing Feeder ( 25-35 Hp, S-D ) - 2 Nos, , Valve Actuator Starter-3 Nos, Cholrinator Starter ( 0.5 Hp, Dol ) - 1 No, Vacuum Pump Starter ( 1 Hp, Dol ) - 1 No, Blower Starter ( 7.5 Hp, Dol ) , Outdoor Lighting Feeder And Control Feeder And Genearl Feeder And Plc Feeder. 65 200 Amps, 415 V Porcelin Based Rewireable Type Male Female Kit Kat Fuse Unit With Extension Strip 66 Supply, Delivery And Storage At Site 1.1 Kv Grade50 Mm2 3½Core Xlpe Insulated Al. Armoured Cable 67 Supply, Delivery And Storage At Site 1.1 Kv Grade 6 Mm23core Xlpe Insulated Copper Cable. ( Frommcc Panel To Motor. ) 68 Supply, Delivery And Storage At Site 1.1 Kv Grade25 Mm2 4 Core Xlpe Insulated Aluminiun Armoured Cable. ( From Arp Pump House To Tube Well Site ) 69 Supply, Delivery And Storage At Site 1.1 Kv Grade6 Mm2 3Core Xlpe Insulated Al. Armoured Cable ( From Mcc Panel To Actuator For Power ) 70 Supply, Delivery And Storage At Site1.1 Kv Grade 1.5 Sq. Mm.12Core Pvc Insulatedcopper Controlcable ( From Mcc Panel To Actuator For Control ) 71 Supply, Delivery And Storage At Site Of Electromagnetic Type Flowmeter With Separate Transmitter With Suitable Length Interconnecting Cable For Measuring Flow Of Clear Water. Flow Sensing Element Shall Have Ip 68 Degree Of Protection. Flow Meter Shall Be Opearted At 220 V And Shall Have Flow Rate And Flow Totalisation ( Dn 150 Mm ) 72 Providing Earthing & Lightning Protection For Pump House And Electrical Installation As Per Iss And Ie Rules. ( Earth Pit 2 Nos+ 2 L / A ) 73 Supply And Fixing Of Gi Perforated Cable Tray At Pump House For Laying Of Incoming & Outgoing Power And Control Cables To And From Mcc Panel, Motor And Other Electrical Accessories Having Proper M.S. Structural Support As Per Direction Of Eic. 74 Supply Delivery At Site And Storage Of Indoor And Oudoor Illumination Arrangement Like Suitable Size Wire, Switch , Switch Board , Tube Light Fitting , Exhaust Fan , Ceilling Fan , Led Outdoor Fixturecomplete As Per Nit Specification. 75 Supply Delivery At Site And Storage Of Safety Equipment Like Suitable Capacity Fire Extinguisher , Sand Bucket , Fire Bracket, Rubber Mats, Shock Treatment Chart And First Aid Box, Chair , Table, 415 Volt Danger Board Complete. 76 Supply, Delivery And Installation Of Automatically Controlled 0-100 Lph Diaphargm Type Chlorinator For Accurate Dosing Of Chlorine Solution Into The Waterby Connecting Metering Pump ( Diaphragm Type ) As Per Nit Specification. 77 Supply Delivery And Installation Storage Of 50 Kva Power Correction Arrangement As Per Nit Specification. 78 Installation Of All Items As Mentioned In Sl.No.32 To 53 Including Construction Of Pump Foundations, Pipe Supports, Valve Supports, Laying Of Cables With Necessary Jointing Materials, Earthing Arrangement Of Motors, Starters, Including Supply Of All Erection Items Viz. Rubber Gaskets, Nuts & Bolts Etc., Including Cost Ofwelding Etc. As Required For Complete Installation Including Making Slope Of Floor And Arrangement Of Removing Gland Leckage Water As Per Hydraulic Standard & Ie Rules In Compliance Upto Entire Satisfaction Of Eic. 79 Painting Of The Installation ( Viz.Pumps, Valves, Pipe Lines Etc.By Two Coats Of Epoxy Paint ( Colour To Be Decided By Eic ) Over A Coat Of Primer As Per Direction Of Eic. 80 Testing & Commissioning Of The Entire Installation I.E.Pumps, Motors, Valves Etc. As In Sl No. 32 To 53 As Per Direction And To The Entire Satisfaction Of E.I.C. 81 Operation And Maintenance Of The Entire Installation In High Lift And Low Lift Pumping Stations On 16 Hrs. Basis Including Guarding For A Period Of 90 Days Are To Be Provided With Supply Of Skilled Personnel Including Watch And Ward Personnel From The Date Of Commissioning. During Maintenance Period Supply Of All Consumable Materials Sundrys And Lubricants Are To Be Supplied. Charges Of Electrical Energy During Maintenance Period Will Be Born By The Department. ( For Tw No.-I And Airp Site ) 82 N.B. Progressive Bills Shall Only Be Done After Third Party Inspection Agency Engaged By Phed.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
West Bengal View Result →
40.
Defence #10163003 Price Bid
Tender For Procurement Of Medicines / Consumable- Inj Ondansteron 8Mg , Ondansteron 8Mg Tab , Levosulpride 25Mg Tab , Antacid Containingaluminium Hydroxide 250 Mg, Magnesium Hydroxide Nf 250 Mg, Methyl Polysiloxane 50 Mg Tab , Antacid Gel Each 5 Ml Containing Driedaluminium Hydroxide Gel250 Mg, Magnesiumhydroxidenf 250 Mg, Methylne Polysiloxane 50 Mg As Per Nfi Bott Of 400 Ml Syrup , Pantoprazole 40Mg Inj , Ranitidine 150Mg Tab , Ranitidine Hcl50mg-2Ml Inj , Lactic Acid Bacillus Sachet , Metoclopramide Hcl 5 Mg / Ml–2Mlinj , Syp Metoclopramide 30Ml , Dicyclomine Hcl20 Mg–2Ml Inj , Anti - Spasmodic Dicyclomine Hcl 10 Mg, Dextropropoxyphen 65Mg, Acetaminophen 400Mg Syrup , Hyoscine Bromide20 Mg / Ml Inj , Cremaffin Syp Bott Of 170Ml , Rabeprazole 20 Mg + Domperidone 10Mg Tab , Omeprazole 20 Mg + Domperidone 10Mg Tab , Esomeprazole 20 Mg + Domperidone 30 Mg Tab , Esomeprazole 20Mg Tab , Esomeprazole 40 Mg + Levosulpride 75 Mg Tab , Esomeprazole 40 Mg Tab , Pantoprazole 40Mg + Domperidone 30 Mg Tab , Solvent Ether , Deflazacort 6Mg Tab , Inj Paracetamol 10 Mg / Ml Infusion In 100 Ml Bott , Syp Paracetamol 125 Mg / 5 Ml- 500 Ml , Etoricoxib 120Mg Tab , Febuxostate 40 Mg Tab , Levocetrizine 5Mgtab , Gabapentin Cap 400 Mg Tab , Inh 300Mg Tab , Haematinic Ferrous Fumarate, Vit B12, Folic Acid & Vit Tab , Acyclovir Cream 5% , Triaminolone Acetate10 Mg / Ml Inj , Glutaraldehyde2 % Aqueous Solnwith Activator , Glycerin Suppositories Child -2Gm Mould , Isabgol Husk 3.5Gm , Bisacodyi 5Mg Tab , Cough Expectorant Each 5 Ml Containingdiphenhydramine Hcl 14.08Mg, Ammonium Chloride 0.138 Gm, Citrate 57.03Mg, Chloroform 22.08Mg, Menthol 1.14Mg& Alcohol 0.2625Ml5% W / V In Flavoured Base Bottle Of 100Ml , Dextrose 50% - 25Ml , Ascorbic Acid 500Mg Tab , Vitaminb -Complex Therapeutic, With A Minimum Concentration Of Vit B1 -5Mg, Vit B6–3Gm, & Vit B12–5Mcg Tab , Varicella Vaccine 0.5Ml , Cinnarizine 25Mg Tab , Hydroxychloroquine 200Mg Tab , Leflunomide 20Mg Tab , Leflunomide10 Mg Tab , Ultrasound Jelly Tube Of 250 Gm. , Ecg Recording Paper Roll , Disodium Hydrogen Citrate 125 Gm / 5Mlsyp Bott Of 100 Ml , Etoricoxib 90Mg Tab , Oral Gel Containing Choline Salicylate And Benzalkonium Chloride Solution , Lint Piece , Tamsulosin Hcl 0.4 Mg + Dutasteride 0.5 Mg Tab , Micronised Purified Flavonoid Fraction 1000 Mg ( Daflon ) Tab , Micronised Purified Flavonoid Fraction 500 Mg ( Daflon ) Tab , Ecg Paper Roll ( 215Mm X 20Mtr ) , Sodium Hypochlorite 5% , Serum Anti D , Serum Anti Human Globulin , Serum Haemagglutinatinganti B , Serum Haemagglutinating AntiA , Serum Haemagglutinating Anti Ab , Disposable Lancet For Finger Prick, Pkt Of 100 , Printer Paper Roll ( 108X30mtr ) , Glass, Cover Microscopic Rectangular, 22 X 30Mm Made Of Usp No1 Glass , Glass, Cover, Microscope, 18 Mmsquare 0.10 Mm ( 1 / 250 ) Thick For Dark Ground Work Pkt Of 14 G , Cover Glass ( 22X50mm ) , Micropipette Fixed Vol500ml , Micropipette Fixed Vol 1000Ml , Micropipettes, Tips For 1 -200 Ui , Micropipettes, Tips For 500 --1000 Ui , Micropipette Variable Vol ( 5-50Ml ) , Pencil, Marking Glass , Semi Auto Hematology Cell Counter Printing Paper Roll For , Semi Auto Analyser, Erba Wash , Semi Auto Analyser, Printing Paper Roll For , Slide, Microscope Thickness 1.15 Mm To 1.35Mm Size 76Mm X 50Mm , Slide, Microscope, Thickness 1.15 To 1.35Mm Size 75Mm X 25Mm , Wintrobes Tube , Acetone ( 1X500ml ) , Acid Hydrochloric ( 1X500ml ) , Aluminium Foils , Alcohol Methyl , Erba Ck Nac ( 2X8 Ml / 2X2 Ml ) , Biofix / Cytofix Spray ( 1X125ml ) , Tissue Embedding Cassettes ( Plastic ) , Tissue Processing Cassettes ( Plastic ) , Ethanol ( Abs Alcohol 1X500ml ) , Methanol ( Acetone Free ) , Ketone&Glucose Stips , Drabkins Solution ( Diluting Solution For Haemoglobin Estimation By Cyanmet Haemoglobin Method ) , Glycerin Pure , Kit For Estimation Of Hdl Cholesterol ( Direct ) ( Erba ) , Dpx Mount ( 1X250ml ) , Hiv I & Ii Rapid Test Kit ( 1X30 Test ) , Chloroform Ar ( 1X2.5L ) , Cyanameth Heamoglobib Std ( 1X10ml ) , Keto Diastix Bott Of 50 Strips , Kits For Estimation Of Albumin ( Erba ) , Kits For Estimation Of Cholesterol ( Erba ) , Kits For Estimation Of Glucose ( Erba ) , Kits For Estimation Ofprotein ( Erba ) , Kits For Estimation Of Urea ( Erba ) , Kits For Estimation Of Uric Acid ( Erba ) , Kits For Estimation Of Creatinine ( 4X60 Ml ) ( Erba ) , Kits For Estimation Of Alkaline Phosphatase ( 5X20 Ml ) ( Erba ) , Kits For Estimation Of Sgotast ( 5X20 Ml ) ( Erba ) , Kits For Estimation Of Sgpt ( Alt ) ( 5X20 Ml ) ( Erba ) , Blood Agar Base ( 1X500gm ) , Macconkey Agar ( 1X500 ) , Mha Agar ( 1X500gm ) , Nutrient Broth ( 1X500gm ) , Peptone Water , Pttk Reagent , Sodium Hypochlorite Solution 10% , Stain Eosin, Blue Shade , Stain Eosin, Water Soluble , Stain Fuchsin Acid , Stain Fuchsin Basic , Stain Giemsa , Stain Haematoxylin Powder. , Stain Leishmans Powder. , Eosin Yellow ( 1X25gm ) , Kit For Triglyceride Estimation ( 100 Ml ) ( 5X20 Ml ) ( Erba ) , Kit For Ldl Cholesterol By Direct Estimation ( Erba ) , Kit For Estimation Of Bilirubin ( Erba ) , Kit For Estimation Of Ggt ( Gamma Gluteryl Transaminase ) ( 12 X 5 Ml ) ( Erba ) , Kit For Estimation Of Cpk-Mb ( 2X8 Ml / 2X2ml ) ( Erba ) , Kit For Estimation Of Calcium ( 50 Ml ) ( Erba ) , Kit For Estimation Of Amylase ( 5 X 6.5 Ml ) ( Erba ) , Kit For Estimation Of Ldh ( 12 X 5Ml ) ( Erba ) , C Reactive Protein ( Kit For 50 Tests ) ( Tulip ) , Pt Reagent ( Kit Of 25 Tests ) , Amyl Alcohol , Glycerol Ar ( 1X500ml ) , Pap Stain Ia ( Harris Haloxylin Sol ) , Pap Stain 2 B ( Og 6 ) , Pap Stain 3 B ( Ea 50 / 36 ) , Tsi ( Triple Suger Iron ) , Lactose , Stain Brilliant Crystal Blue , Stain Geimsa Powder ( 1X50gm ) , Stain Hematoxyline Ready To Use ( 1X500ml ) ( Hi Media ) , Phenol Red , Acetone Commercial , Stain Saframin ( 1X25gm ) , Urine Strips ( 1X 100 Strips ) , Xylol Pure ( 1X500ml ) , Widal Test Kit ( 4X5ml ) , Abst Disc Cepepime-30Mcg , Abst Disc Azithromycin-15Mcg , Abst Disc Erythromycin-15Mcg , Abst Disc Ampicillin-10Mcg+Solbactam10 Mcg , Abst Disc Nitrofurantoin-300Mcg , Abst Disc Amoxyclav-30Mcg , Abst Disc Cefexime-05Mcg , Abst Disc Amoxycillin-10Mcg , Abst Disc Cefuroxime-30Mcg , Abst Disc Linezolid-30Mcg , Abst Disc Nalidixic Acid-30Mcg , Abst Disc Gentamycin-10Mcg , Abst Disc Ceftazidime-30Mcg , Abst Disc Tetracycline-30Mcg , Abst Disc Cotrimoxazole-25Mcg , Abst Disc Chloramphenicol-30Mcg , Abst Disc Vancomycin-30Mcg , Abst Disc Neomycin-30Mcg , Abst Disc Streptomycin-10Mcg , Abst Disc Cloxacillin-5Mcg , Truenat Tm Beta Cov-50 Test , Truenat Tm Sars Cov-50 Test , Trueprep Auto Universal Sample Pre-Treatment 50 Test , Trueprep Auto Transport Medium For Swab Specimen- 50 Test , Trueprep Auto Universal Cartridge Based Sample Prep Kit - 50 Test , Filter Paper 9Mm ( Pkt Of 100 ) , Malaria Paracheckag / Ab ( 1X50 ) , Malaria Paracheck Pv / Pf ( 1X50 Test ) , Microprotin Kit ( 1X50 Ml ) , Paraffin Wax , Ra Factor Kit ( 1X25 Test ) , Stainreticulocyle ( Rtu ) , Stromatolyzer 500 Ml ( Sysmex ) , Tsh ( 1X 96 Test ) Avaintor , T3 ( 1X96 Test ) Avaintor , T4 ( 1X 96 Test ) Avaintor , Stain Leishmens Ready To Use 500 Ml Bott , Gram Stain ( Rtu ) , Blood Culture Plates ( Rtu ) , Abst Discamikacin-30Mcg , Abst Disc Norfloxacin-10Mcg , Abst Disc Ampicillin-10Mcg , Abst Disc Clindamycin-02Mcg , Abst Disc Levofloxacin-05Mcg , Abst Disc Ciprofloxacin-10Mcg , Abst Disc Ceftriaxone-30Mcg , Abst Disc Imipenem-10Mcg , Aso Titrate Testkit Rapid ( 1X25 Test ) , Calcium Chloride 0.025 Ml For Pitk , Cell Clean , Cell Pack ( Sysmex Pack Of 20 Ltr ) , Cover Glass ( 22X40 Mm , Dengue Ns1, 1Gg, 1Gm ( Combo Pack ) , Diposable Gown , Disposable Swabstick , Esr Tube Disposable , Filter Paper Large 46X57 Cm ( Pack Of 100 ) , G6pd , Gravindex Test ( 1X50 ) , Haemosport Kit ( 1X50 ) , Hbsag Rapid Card ( 1X30 Test ) , Cartridge For D Dimer ( Sd Biosensor ) , Cartridge For Hba1c ( Sd Biosensor ) , Cartridge For Hs Crp ( Sd Biosensor ) , Cartridge For B-Hcg ( Sd Biosensor ) , Cartridge For Urine Albumin ( Sd Biosensor ) , Cartridge For Vit-D ( Sd Biosensor ) , Cartridge For Tsh ( Sd Biosensor ) , Cartridge For T3 ( Sd Biosensor ) , Cartridge For T4 ( Sd Biosensor ) , Tissue Embedding Rings ( Steel ) , Vdrl Kit , Rf Factor , Typhi Dot => Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 16
Bihar View Result →
41.
Defence #10134476 Price Bid
Procurement Of Medicines / Consumable Are Required To Be Procured Through Dglp Fund Code Head107 ( C ) Minor Head 363 / 01 For The Treatment Of Ex Serving Pers Andtheir Dependent--1. 10123 Lidocaine / Lignocaine Hcl Inj 2% With Adrenaline / Epinephrine ( 1 ( 1:80000 ) In 2 Ml Cartridge 2. 10253 Aspirin ( Soluble ) Tab 350Mg 3. 10278 Paracetamol 500Mg And Ibuprofen 400Mg Tab 4. 10312 Hydrocortisone Acetate Inj 25Mg / Ml Vial Of 5 Ml 5. 10545 Donepezil Tab 5 Mg 6. 10552 Phenytoin Sodium Inj Vial Of 100Mg 7. 10566 Sumatriptan Nasal Spray 20 Mg , 10 Md 8. 10611 Diethylcarbamazine Tab 50Mg 9. 10622 Clofazimine 100Mg 10. 10640 Isoniazid Tab 100Mg With Pyridoxine 5Mg 11. 10645 Pyrazinamide 1500 Mg Tab 12. 10685 Quinine Dihydrochloride 300Mg / Ml Amp Of 2 Ml 13. 10843 Methotrexate 2.5Mg Tab 14. 10877 Medroxy Progesterone Tab 100 Mg 15. 11017 Heamatinic Tab / Cap Containing ( A ) Ferrous Furrarate 200 -350 Mcg ( Vit B-12- 2 Mcg To 10 Mcg © Folic Acid 500-1500 Mcg 16. 11040 Phytomenadione ( Vit K ) 1 Mg / 0.5Ml ) Inj 17. 11106 Fenofibrate Tab 200 Mg 18. 11118 Nitroglycerin 5Mg Patches Controlled Release 19. 11150 Nifedipine Retard 20 Mg Cap / Tab 20. 11161 Dopamine Hcl Inj 40 Mg / Ml In Amp Of 5Ml 21. 11198 Tab Ramipril 5 Mg + Hctz 12.5 Mg 22. 11246 Antiseptic Mouth Washy Containing Sodium Flouride And Triclosan Bott 100-150Ml 23. 11252 Sodium Fluoride / Stannous Flouride Bott / Tube Of 120 - 150Ml Or Gm 24. 11255 Mercury Pack Of 30 Gm 25. 11305 Tacrolimus Oint ( 0.03 % ) 20 Gm Tube 26. 11311 Betamethasone Dipropionate Usp 5Mg And Gentamycin Sulphate 1Mg / Gm Tube Of 5Gm 27. 11337 Glycerin ( Glycerol ) 28. 11356 Salicylic Acid 1% + Coal Tar Scalp 3% Solution Bott Of 100 Ml 29. 11374 Triamcinolone Acetate Inj 10 Mg / Vial Of 1 Ml 30. 11388 Betamethasone 0.1%+ Salicyclic Acid 3% Cream Of 20 Gm 31. 11465 Chloroxylenol Solution Potassium Hydroxide 13.6G, Chloroxylenol Solution 50.5G Oleic Acid-7.5Ml Castor Oil-63.0G Terpineal-100Ml Ethanol ( 96% ) -200Ml Purified Water Freshly Boiled & Cooled To Produce 1000Ml Also Acceptable Chloroxylenol-4.5 32. 11476 Liquid Antiseptic ( Chlorhexidine Solution ) With Activator Containing Chlorhexidine Gluconate Bp 7.5% V / V Cetrimide Bp 15% W / V Sufficient Quantity Of Tab Sodium Nitrite 1G To Make 0.4% Soln With Each 1 Litre Cont In Air Tight Pack 33. 11508 Frusemide Inj 20 Mg In Amp Of 2 Ml 34. 11520 Triamterene Tab Ip 50Mg And Benzthiazide Nfc ( Us ) 25Mg 35. 11609 Ribavirin 200Mg Cap 36. 11626 Probiotic ( Multibacillary Or More Organism ) 37. 11660 Dicyclomine Hcl 20Mg Inj 38. 11665 Antispasmodic Cap Containing Dicyclomine Hcl 10Mg, Dextroprop Oxyphen Hcl 65Mg Acetaminophen Ip 400Mg 39. 11705 Ibandoronate 150Mg 40. 11772 Human Insuline Analouge Premix 25% Insulin Lispro / 75% Insuline Lispro Protamine Suspension 100Iu / Ml ( Monocomponent Insuline Recombenient Dnaorigin ) 3Ml Pfs / Pfp 41. 11969 Ethinylestradiol 0.01 Mg Tab 42. 11741 Povidone Iodine 5% Pessary 43. 11764 Insulin Premixed Biphasic Human Inj 40Iu / Ml ( 50% Human Neutral Human Isophane Insulin ) Vial Of 10 Ml 44. 11772 Human Insuline Analouge Aspart Premix 30 %Insulin / 70% Insuline Protamin Aspart Suspension 100 Iu / Ml ( Monocomponent Insulin , Recombinant Dna Origin ) 3 Ml Pfs / Pfp 45. 11777 Linagliptin 2.5 Mg + Metformin 500 Mg 46. 11779 Linagliptin 2.5 Mg + Metformin 1000 Mg 47. 11781 Empagliflozon 10 Mg 48. 11782 Empagliflozon 25 Mg 49. 11791 Teriperatide 20Mcg Per Dose, 30 Doses 50. 11797 Testosterone Propionate Inj Amp Of 25 Mg 51. 11965 Carnitine Tab 200 Mg 52. 11981 Sevelamer 400 Mg Tab 53. 11988 Lanthanum Carbonate 500Mg 54. 12006 Ciprofloxacin Hcl 0.3% Tube Of 5 Gm 55. 12015 Gentamicin Sulphate 0.3% W / V Gentamicin Base With Hydrocortisone Acetate Ip 1% W / V Eye & Ear Drops Bott Of 5 Ml 56. 12029 Methyl Cellullose 2% Solution Bottle Of 5 Ml 57. 12033 Norfloxacin 0.3% Eye Drops 3 Mg / Ml Bott Of 5 Ml 58. 12036 Phenylephrine Hcl 10% With Chlorbutoln 0.5 % Eye Drops 59. 12048 Sodium Hyaluronate Opthalmic Sol 1% ( 10Mg / Ml ) Pre Filled Solution 60. 12065 Dexamethasone Sodium Phosphate 1% & Tobramycin 0.3% W / W Oint Tube Of 3.5Gm 61. 12101 Syp Diphenhydramine 10-15 Mg Per 5 Ml And Ammonium Chloride 100-150Mg, Sodium Citrate 50-85 Mg Per 5 Ml Bottle Of 100Ml 62. 12105 Beclomethasone Dipropionate Nasal Spray 50 Mcg Per Dose Metered Dose 150 Units 63. 12131 Nasal Decongestant Tab ( Phenylpropanolamine With Chlorpheniramine ) 64. 12223 Levo - Salbutamol Susp 65. 12311 Chlorpromazine Tab 25 Mg 66. 12453 Antiasthmatic Elixir 15 Ml Containing Theophylline 80Mg, Alcohol ( 95% ) 3.15Ml In Flavoured Aqueous Base Bott Of 200Ml 67. 12455 Inh Beclomethasone Diproprionate 50 Mcg + Salbutamol ( As Sulphate ) 100Mcg Per Metered Dose Aerosol, 200 Dose Units 68. 12457 Beclomethasone Dipropionate 50 Mcg Per Dose Metered Dose Cointaining 200 Metered Dose 69. 12469 Etophylline 115Mg And Theopohylline 35 Mg In Slow Release Form 70. 12477 Salbutamol 4 Mg Tab 71. 12480 Formeterol Fumarate 12 Mcg R / C Bott Of 30 Caps 72. 12482 Formoterol 12 Mcg & Fluticasone 250 R / C Bott Of 30 Cap 73. 12484 Tiotropium Bromide 18 Mcg Dry Powder Cap Bott Of 30 Caps 74. 12489B Cough Expectorant Syp 5 Ml Containing Diphenhydramine Hcl 14.08Mg Ammonium Chloride 0.138 Gm, Sodium Citrate 57.03Mg Chloroform 22.08Mg, Methol 1.14 Mg & Alcohol 0.2625 Ml ( 5% V / V ) In Flavoured Sype Base Bott Of 100Ml 75. 12491A Cough Sedative Syp Each 5 Ml Containing Chlorpheniramine Maleate 2.5Mg Guiaphenesin 100Mg Noscapine 15Mg Sodium Citrate 60Mg Flavoured Base Bott Of 100 Ml 76. 12492 Codeine Phosphate 10Mg + Clorphenaramine Maleate 4Mg Per 5Ml Bottle Of 100Ml 77. 12504 Dextrose Monohydrate For Oral Use 78. 12528 Sterile Water For Amp Of 10 Ml 79. 12630 Anti Phlebitis Cream Tube Of 15G / 20G 80. 12701 Ascorbic Acid 100 Mg 81. 12707 B 12 Inj 500 Mcg / Ml 82. 12820 Ethionamide Tab 250 Mg 83. 12822 Finofibrate Tab / Cap 200 Mg 84. 12830 Fluticasone Propionate Inhaler For Paed Use 50Mcg / Dose, 120 Metered Dose 85. 12832 Fluticasone Propionate Inhaler For Adults 125Mcg / Dose, 120 Metered Doses 86. 12834 Formeterol 06 Mcg And Budesonide 400Mcg , Cfc Free, Mdi, 120 Metered Doses 87. 12856 Salmeterol 50Mcg +Fluticasone 250Mcg Pulverised For Inhalation Rotacaps, Pack Of 30 88. 12858 Inh Salmeterol 50Mcg + Fluticasone 250Mcg 89. 12860 Salmeterol Rotacap 50Mcg Bott Of 30 Caps 90. 12862 Salbutamol 100 Mcg + Ipratropium 200 Mcg Inhaler 91. 12868 Theophylline Sr Tab 400 Mg 92. 12918 Capsacain Gel Tube Of 20 Gm 93. 12942 Ibuprofen Gel Tube Of 20 Gm 94. 12948 Naproxen Gel Tube Of 20 Gm 95. 13205 Amoxycillin 250Mg + Clavulanic Acid 50Mg 300 Mg Inj 96. 13261 Sulphamethoxazole 400 Mg & Trimethoprim 80Mg Tab 97. 13290 Lamivudine 150 Mg Tab 98. 13294 Zidovudine 300Mg+ Lamivudine 150Mg Tab 99. 13296 Zidovudine Tab 300 Mg 100. 20211 Tetanus Toxoid, Purified Absorbed Rubber Capped, Vial Of 5 Ml ( 10 Doses )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Bihar View Result →
42.
Defence #10134469 Price Bid
Procurement Of Medicines / Consumable Are Required To Be Procured Through Dglp Fund Code Head107 ( C ) Minor Head 363 / 01 For The Treatment Of Ex Serving Pers Andtheir Dependent-1. 10123 Lidocaine / Lignocaine Hcl Inj 2% With Adrenaline / Epinephrine ( 1 ( 1:80000 ) In 2 Ml Cartridge 2. 10253 Aspirin ( Soluble ) Tab 350Mg 3. 10278 Paracetamol 500Mg And Ibuprofen 400Mg Tab 4. 10312 Hydrocortisone Acetate Inj 25Mg / Ml Vial Of 5 Ml 5. 10545 Donepezil Tab 5 Mg 6. 10552 Phenytoin Sodium Inj Vial Of 100Mg 7. 10566 Sumatriptan Nasal Spray 20 Mg , 10 Md 8. 10611 Diethylcarbamazine Tab 50Mg 9. 10622 Clofazimine 100Mg 10. 10640 Isoniazid Tab 100Mg With Pyridoxine 5Mg 11. 10645 Pyrazinamide 1500 Mg Tab 12. 10685 Quinine Dihydrochloride 300Mg / Ml Amp Of 2 Ml 13. 10843 Methotrexate 2.5Mg Tab 14. 10877 Medroxy Progesterone Tab 100 Mg 15. 11017 Heamatinic Tab / Cap Containing ( A ) Ferrous Furrarate 200 -350 Mcg ( B ) Vit B-12- 2 Mcg To 10 Mcg © Folic Acid 500-1500 Mcg 16. 11040 Phytomenadione ( Vit K ) 1 Mg / 0.5Ml ) Inj 17. 11106 Fenofibrate Tab 200 Mg 18. 11118 Nitroglycerin 5Mg Patches Controlled Release 19. 11150 Nifedipine Retard 20 Mg Cap / Tab 20. 11161 Dopamine Hcl Inj 40 Mg / Ml In Amp Of 5Ml 21. 11198 Tab Ramipril 5 Mg + Hctz 12.5 Mg 22. 11246 Antiseptic Mouth Washy Containing Sodium Flouride And Triclosan Bott 100-150Ml 23. 11252 Sodium Fluoride / Stannous Flouride Bott / Tube Of 120 - 150Ml Or Gm 24. 11255 Mercury Pack Of 30 Gm 25. 11305 Tacrolimus Oint ( 0.03 % ) 20 Gm Tube 26. 11311 Betamethasone Dipropionate Usp 5Mg And Gentamycin Sulphate 1Mg / Gm Tube Of 5Gm 27. 11337 Glycerin ( Glycerol ) 28. 11356 Salicylic Acid 1% + Coal Tar Scalp 3% Solution Bott Of 100 Ml 29. 11374 Triamcinolone Acetate Inj 10 Mg / Vial Of 1 Ml 30. 11388 Betamethasone 0.1%+ Salicyclic Acid 3% Cream Of 20 Gm 31. 11465 Chloroxylenol Solution Potassium Hydroxide 13.6G, Chloroxylenol Solution 50.5G Oleic Acid-7.5Ml Castor Oil-63.0G Terpineal-100Ml Ethanol ( 96% ) -200Ml Purified Water Freshly Boiled & Cooled To Produce 1000Ml Also Acceptable Chloroxylenol-4.5 32. 11476 Liquid Antiseptic ( Chlorhexidine Solution ) With Activator Containing Chlorhexidine Gluconate Bp 7.5% V / V Cetrimide Bp 15% W / V Sufficient Quantity Of Tab Sodium Nitrite 1G To Make 0.4% Soln With Each 1 Litre Cont In Air Tight Pack 33. 11508 Frusemide Inj 20 Mg In Amp Of 2 Ml 34. 11520 Triamterene Tab Ip 50Mg And Benzthiazide Nfc ( Us ) 25Mg 35. 11609 Ribavirin 200Mg Cap 36. 11626 Probiotic ( Multibacillary Or More Organism ) 37. 11660 Dicyclomine Hcl 20Mg Inj 38. 11665 Antispasmodic Cap Containing Dicyclomine Hcl 10Mg, Dextroprop Oxyphen Hcl 65Mg Acetaminophen Ip 400Mg 39. 11705 Ibandoronate 150Mg 40. 11772 Human Insuline Analouge Premix 25% Insulin Lispro / 75% Insuline Lispro Protamine Suspension 100Iu / Ml ( Monocomponent Insuline Recombenient Dnaorigin ) 3Ml Pfs / Pfp 41. 11969 Ethinylestradiol 0.01 Mg Tab 42. 11741 Povidone Iodine 5% Pessary 43. 11764 Insulin Premixed Biphasic Human Inj 40Iu / Ml ( 50% Human Neutral 50% Human Isophane Insulin ) Vial Of 10 Ml 44. 11772 Human Insuline Analouge Aspart Premix 30 %Insulin / 70% Insuline Protamin Aspart Suspension 100 Iu / Ml ( Monocomponent Insulin , Recombinant Dna Origin ) 3 Ml Pfs / Pfp 45. 11777 Linagliptin 2.5 Mg + Metformin 500 Mg 46. 11779 Linagliptin 2.5 Mg + Metformin 1000 Mg 47. 11781 Empagliflozon 10 Mg 48. 11782 Empagliflozon 25 Mg 49. 11791 Teriperatide 20Mcg Per Dose, 30 Doses 50. 11797 Testosterone Propionate Inj Amp Of 25 Mg 51. 11965 Carnitine Tab 200 Mg 52. 11981 Sevelamer 400 Mg Tab 53. 11988 Lanthanum Carbonate 500Mg 54. 12006 Ciprofloxacin Hcl 0.3% Tube Of 5 Gm 55. 12015 Gentamicin Sulphate 0.3% W / V Gentamicin Base With Hydrocortisone Acetate Ip 1% W / V Eye & Ear Drops Bott Of 5 Ml 56. 12029 Methyl Cellullose 2% Solution Bottle Of 5 Ml 57. 12033 Norfloxacin 0.3% Eye Drops 3 Mg / Ml Bott Of 5 Ml 58. 12036 Phenylephrine Hcl 10% With Chlorbutoln 0.5 % Eye Drops 59. 12048 Sodium Hyaluronate Opthalmic Sol 1% ( 10Mg / Ml ) Pre Filled Solution 60. 12065 Dexamethasone Sodium Phosphate 1% & Tobramycin 0.3% W / W Oint Tube Of 3.5Gm 61. 12101 Syp Diphenhydramine 10-15 Mg Per 5 Ml And Ammonium Chloride 100-150Mg, Sodium Citrate 50-85 Mg Per 5 Ml Bottle Of 100Ml 62. 12105 Beclomethasone Dipropionate Nasal Spray 50 Mcg Per Dose Metered Dose 150 Units 63. 12131 Nasal Decongestant Tab ( Phenylpropanolamine With Chlorpheniramine ) 64. 12223 Levo - Salbutamol Susp 65. 12311 Chlorpromazine Tab 25 Mg 66. 12453 Antiasthmatic Elixir 15 Ml Containing Theophylline 80Mg, Alcohol ( 95% ) 3.15Ml In Flavoured Aqueous Base Bott Of 200Ml 67. 12455 Inh Beclomethasone Diproprionate 50 Mcg + Salbutamol ( As Sulphate ) 100Mcg Per Metered Dose Aerosol, 200 Dose Units 68. 12457 Beclomethasone Dipropionate 50 Mcg Per Dose Metered Dose Cointaining 200 Metered Dose 69. 12469 Etophylline 115Mg And Theopohylline 35 Mg In Slow Release Form 70. 12477 Salbutamol 4 Mg Tab 71. 12480 Formeterol Fumarate 12 Mcg R / C Bott Of 30 Caps 72. 12482 Formoterol 12 Mcg & Fluticasone 250 R / C Bott Of 30 Cap 73. 12484 Tiotropium Bromide 18 Mcg Dry Powder Cap Bott Of 30 Caps 74. 12489B Cough Expectorant Syp 5 Ml Containing Diphenhydramine Hcl 14.08Mg Ammonium Chloride 0.138 Gm, Sodium Citrate 57.03Mg Chloroform 22.08Mg, Methol 1.14 Mg & Alcohol 0.2625 Ml ( 5% V / V ) In Flavoured Sype Base Bott Of 100Ml 75. 12491A Cough Sedative Syp Each 5 Ml Containing Chlorpheniramine Maleate 2.5Mg Guiaphenesin 100Mg Noscapine 15Mg Sodium Citrate 60Mg In Flavoured Base Bott Of 100 Ml 76. 12492 Codeine Phosphate 10Mg + Clorphenaramine Maleate 4Mg Per 5Ml Bottle Of 100Ml 77. 12504 Dextrose Monohydrate For Oral Use 78. 12528 Sterile Water For Amp Of 10 Ml 79. 12630 Anti Phlebitis Cream Tube Of 15G / 20G 80. 12701 Ascorbic Acid 100 Mg 81. 12707 B 12 Inj 500 Mcg / Ml 82. 12820 Ethionamide Tab 250 Mg 83. 12822 Finofibrate Tab / Cap 200 Mg 84. 12830 Fluticasone Propionate Inhaler For Paed Use 50Mcg / Dose, 120 Metered Dose 85. 12832 Fluticasone Propionate Inhaler For Adults 125Mcg / Dose, 120 Metered Doses 86. 12834 Formeterol 06 Mcg And Budesonide 400Mcg , Cfc Free, Mdi, 120 Metered Doses 87. 12856 Salmeterol 50Mcg +Fluticasone 250Mcg Pulverised For Inhalation Rotacaps, Pack Of 30 88. 12858 Inh Salmeterol 50Mcg + Fluticasone 250Mcg 89. 12860 Salmeterol Rotacap 50Mcg Bott Of 30 Caps 90. 12862 Salbutamol 100 Mcg + Ipratropium 200 Mcg Inhaler 91. 12868 Theophylline Sr Tab 400 Mg 92. 12918 Capsacain Gel Tube Of 20 Gm 93. 12942 Ibuprofen Gel Tube Of 20 Gm 94. 12948 Naproxen Gel Tube Of 20 Gm 95. 13205 Amoxycillin 250Mg + Clavulanic Acid 50Mg 300 Mg Inj 96. 13261 Sulphamethoxazole 400 Mg & Trimethoprim 80Mg Tab 97. 13290 Lamivudine 150 Mg Tab 98. 13294 Zidovudine 300Mg+ Lamivudine 150Mg Tab 99. 13296 Zidovudine Tab 300 Mg 100. 20211 Tetanus Toxoid, Purified Absorbed Rubber Capped, Vial Of 5 Ml ( 10 Doses )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Bihar View Result →
43.
Educational and Research Institute #10121781 Price Bid
Rate Contract For Supply Of Consumables And Non Consumables Rate Contract For Supply Of Consumables And Non Consumables For The Department Of Cardiology For 2021 22 , Consumable Items 1.Items With ( Prefix S ) Sample Must Be Submitted To The Department With Item Number Superscripted Within 15 Days Of Online Tender Opening 2.All Implantable Devices Should Be Licensed For Sale In India By Dcgi, And Should Be Usfda Approved Failing Which Human Clinical Trial Data Published In Indexed Journals Should Be Submitted 3.All Implantable Devices Should Be Supplied Only By Companies That Has Supplied To Major Hospitals ( 500 Beds ) In India Or Abroad ( Proof To Be Enclosed ) . 4.Items Which Come In Packs- Mention Price Per Unit And Pack Size. 5.Patient Size Variable Implantable Devices And Consumables ( Prefix Ex ) ( Stents / Asd / Vsd / Pda / Balloons / Coils / Etc- The Supplier Should Exchange The Desired Size If One Size Is Exhausted So As To Avoid Device Patient Mismatch Till The Last Item Is Used. 6.Items Which Has A Prefix ( D ) Has To Be Demonstrated By The Company To The Departmental Selection Committee. 7.Items Supplied Should Have An Expiry Date Of More Than 12 Months From Date Of Supply. 8.All The Items Should Be Should Be Fda / Ce / Dcgi Approved , ( S ) Femoral Pci Sheath Systems Size 4Fwith Accessories For Insertion.Should Be Fda / Ce / Dcgi Approved , ( S ) Femoral Pci Sheath Systems Sizes 5F-9F With Accessories For Insertion.Should Be Fda / Ce / Dcgi Approved , ( S ) Femoralpci Sheath Systems Sizes10, 12, 14 F Withaccessories For Insertion.Should Be Fda / Ce / Dcgi Approved , ( S ) Vascular Closure Devices Femoral All Sizes.Should Be Fda / Ce / Dcgi Approved , ( S ) Transradial Sheath Systems With Hydrophilic Coating On Sheath, Tapering Dilator Hydrophilic Staright Polymer 025 Or 021 Wires And 20G Plastic Cannula For Puncture 5F, 6F, 7F.Should Be Fda / Ce / Dcgi Approved , ( S ) Radial Angio Set With Puncture Needle, Sheath 6F, Straight Guidewire 025 / 021And Tig And Tig Ii Catheter 5F, And Hydrophilic Polymer J Tipped 035 145 Cm Wires.Should Be Fda / Ce / Dcgi Approved , ( S ) Radial Angiography Kits Comprising The Following Items A.Radial Sheath Insertion System 6F B. Radial Angiography 5F Tig Catheter C. 0.035 J Hydrophilic Polymer Wire, D.Disposable Sterile Drape For Radial / Femoral Angiography E.Disposable Sterile Gowns -2, F.Disposable Gloves-2, G.Finger Control Syringe 20Cc H.3 / 3 Rotating Manifold I.Pressure Line J.100 Ml Non Ionic Contrast Media.Should Be Fda / Ce / Dcgi Approved , ( S ) Flexible Delivery Sheaths With Steerable And Defelctable Introducer Systems ( 60 Cm And Above Long ) .Should Be Ce And Dcgi Approved , ( S ) Extralong ( More Than 150 Cm ) Pigtail Catheters For Illiac Angiography From Radial .Should Be Fda / Ce / Dcgi Approved , ( S ) Prolene Sutured Femoral Access Closure Devices.Should Be Fda Or Ce Anddcgi Approved , ( S ) Radial Compression Devices.Should Be Fda / Ce / Dcgi Approved , ( S ) Cournand Catheter 5F, 6F Woven Dacron.Should Be Fda / Ce / Dcgi Approved , ( S ) Pig Tail Catheters5f, 6F.Should Be Fda / Ce / Dcgi Approved , ( S ) Markerpigtail Catheter 5F, 6F .Should Be Fda / Ce / Dcgi Approved , ( S ) Judkins Left Catheter 4F, 5F, 6F All Curves.Should Be Fda / Ce / Dcgi Approved , ( S ) Judkins Right Catheter 4F, 5F, 6F All Curves.Should Be Fda / Ce / Dcgi Approved , ( S ) Amplatz Left Catheter 4F, 5F, 6F All Curves.Should Be Fda / Ce / Dcgi Approved , ( S ) Amplatz Right Catheter 4F, 5F, 6F All Curves.Should Be Fda / Ce / Dcgi Approved , ( S ) Left Coronary By Pass Catheter 4F, 5F, 6F All Curves.Should Be Fda / Ce / Dcgi Approved , ( S ) Right Coronary By Pass Catheter 4F, 5F, 6F All Curves.Should Be Fda / Ce / Dcgi Approved , ( S ) Internal Mammary Artery Catheter 4F, 5F, 6F All Curves.Should Be Fda / Ce / Dcgi Approved , ( S ) Multipurpose Catheter A1, A2, B1, B2.Should Be Fda / Ce / Dcgi Approved , ( S ) Pig-Tail Catheter Pediatric 4 F.Should Be Fda / Ce / Dcgi Approved , ( S ) Radial Cag Tig Catheters 5F All Curves.Should Be Fda / Ce / Dcgi Approved , ( S ) 2 / 3 Rotating Manifold For Cag.Should Be Fda / Ce / Dcgi Approved , ( S ) 3 / 3 Rotating Manifold For Cag / Ptca.Should Be Fda / Ce / Dcgi Approved , ( S ) Touhey Borst Y Connector- Push Pull Type And Introducer Needle For Ptca.Should Be Fda / Ce / Dcgi Approved , ( S ) Y Connector 10F Diameter Having Larger Inner Lumen With Introducer Needle For Ptca.Should Be Fda / Ce / Dcgi Approved , ( S ) 3 Ring Control Syringes 20Cc.Should Be Fda / Ce / Dcgi Approved , ( S ) Teflon Coated Guide Wire145 Cm 0.021 St. & J.Should Be Fda / Ce / Dcgi Approved , ( S ) Teflon Coated Guide Wire 145 Cm 0.025 St& J.Should Be Fda / Ce / Dcgi Approved , ( S ) Teflon Coated Guide Wires 0.032 145 Cm St& J.Should Be Fda / Ce / Dcgi Approved , ( S ) Teflon Coated Guide Wires 145 Cms 0.035St & J.Should Be Fda / Ce / Dcgi Approved , ( S ) Teflon Coated Guide Wires 145 Cms 0.038 St.Should Be Fda / Ce / Dcgi Approved , ( S ) Exchange Length ( 260Cm And Above ) 0.018 Peripheral Guide Wire .Should Be Fda / Ce / Dcgi Approved , ( S ) Lunderquist Type High Support Exchange Length 0.035 ( 260Cm And Above ) Short And Long Tip Guide Wire .Should Be Fda / Ce / Dcgi Approved , ( S ) Teflon Coated Exchangeguide Wire 260 Cm 0.032St. & J.Should Be Fda / Ce / Dcgi Approved , ( S ) Teflon Coated Exchangeguide Wire 260 Cm 0.035St. & J.Should Be Fda / Ce / Dcgi Approved , ( S ) Teflon Coated Exchangeguide Wire 260 Cm 0.038St& J.Should Be Fda / Ce / Dcgi Approved , ( S ) Terumo Guide Wires 145 Cm 018, 021.032, 035 St And J All Sizes.Should Be Fda / Ce / Dcgi Approved , ( S ) Terumo Exchange Guide Wires 018, 021.032, 035 St And J All Sizes.Should Be Fda / Ce / Dcgi Approved , ( S ) Terumo Stiff Exchange Guide Wires All Sizes.Should Be Fda / Ce / Dcgi Approved , ( S ) Amplatz Type Superstiff Exchange Guide Wires 0.035 And .038. 260 Cm And Above- Short Floppy Tip.Should Be Fda / Ce / Dcgi Approved , ( S ) Amplatz Ultra Stiff Guide Wires 0.035 And 0.038J. 260 Cm And Above- Long Floppy Tip.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Femoral Angioplasty Guiding Catheter Systems 5F, 6F, 7F, 8F All Shapes And Sizes.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Radial Angioplasty-Guiding Catheter Systems 4F All Shapes And Sizes.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Radial Angioplasty-Guiding Catheter Systems 5F, 6F, 7F All Shapes And Sizes.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires Floppy Standard Length .Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires-Floppy Exchange Length.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires Intermediate Standard Length.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires Extra Support Standard Length.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Doc Link Extension Wires.Should Be Fda / Ce / Dcgi Approved , ( S ) Exchange Wires For Ptca .Should Be Fda / Ce / Dcgi Approved , ( S ) Double Core Spring Tip Type Wires For Ptca.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires Tapering Tip Hydrophilic.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wire -Total Occlusion Wires-Platinum.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires For Cto-Hydrophlic .Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires For Cto-Hydrophlicextra Support.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires Polymer Coated Hydrophilic.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires Polymer Coated Hydrophilic Extra Support.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires- Polymer Coated Tapering Tip.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires - Specially Designed For Tortuous Vessels.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Wires Extrasupport Polymer Coated.Should Be Fda / Ce / Dcgi Approved , ( S ) Link Extension Type 300 Cm Wires.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca 009 Exchange Length Wires For Retrograde Approach Exchange Length.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Rapid Exchange Balloonsystems With Semi-Compliant / Compliant Design With Excellent Trackability And High Inflation Pressures .Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Rapid Exchange Balloonsystems With Semi-Compliant / Compliant Design With Excellent Trackability And High Inflation Pressures .Should Be Ce And Dcgi Approved , ( Ex ) Non-Compliant Balloons For Ptca.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Non-Compliant Balloons For Ptca.Should Be Ce And Dcgi Approved , ( S ) Laser Catheter Coronary Calcification Intervention.Should Be Ce And Dcgi Approved , ( S ) Ultra Low Profile Non Compliant Balloons For Pci.Should Be Ce And Dcgi Approved , ( S ) Ultra Low Profile Semi Complaint Baloons For Pci.Should Be Ce And Dcgi Approved , ( S ) Lithrotripsy Balloons For Heavy Calcified Proximal Vessel Pci.Should Be Ce And Dcgi Approved , ( S ) High Trackable 0.018 Embolisation Coils For Post Op- Visceral ( Gi And Renal Artery Pseudoaneurysm )  .Should Be Ce And Dcgi Approved , ( S ) Low Profile Cto Baloons For Pci Starts At 0.75Mm In Diameter.Should Be Ce And Dcgi Approved , ( Ex ) Over The Wire Balloons For Ptca.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Over The Wire Balloons For Ptsma.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Cutting Balloons Coronary.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Cutting Balloons Peripheral.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Drug Eluting Balloons Coronary.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Ultra High Pressure Mustang Type Balloons Peripheral- Sizes From 4Mm To 10Mm All Lengths..Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Drug Eluting Balloons For In Stent Restenosis Coronary.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Scoring Balloons - For Coronary And Peripheral- For Severely Calcified Lesions.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Balloon Mounted Drug Coated Stain Less Steel Coronary Stents.Should Bece And Dcgi Approved , ( Ex ) Balloon Expandabledrug Coatedcobalt Chromium Alloy Coronary Stents .Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Balloon Expandabledrug Coatedplatinum Chromium Alloy Coronary Stents .Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Drug Eluting Stents Fda And Dcgi Approved First Generation.Should Be Fda Approved , ( Ex ) Drug Eluting Stents Fda And Dcgi Approved Secondgeneration.Should Be Fda Approved , ( Ex ) Drug Eluting Stents Fda And Dcgi Approved Third Generation.Should Be Fda Approved , ( Ex ) Drug Eluting Stents Ceand Dcgi Approved.Should Be Ce And Dcgi Approved , ( Ex ) Drug Eluting Stents Dcgi Approved.Should Be Dcgi Approved , ( Ex ) Drug Eluting Coronary Stents Tapering Including Longer Legths.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Drug Eluting Coronary Stents Extra Length ( Beyond 38Mm ) .Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Drug Eluting Stents- Polymer Free.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Drug Eluting Stents- Sizes Above 48Mm For Diffuse Lesions.Should Be Fda Or Ce And Dcgi Approved , ( S ) Coronary Micro Snares ( 2Mm To 5Mm ) .Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Covered Stents-Coronary Low Profile Ad 0.014 Compatable.Should Be Fda / Ce / Dcgi Approved , ( S ) Femoral Angioplasty Kit ( 1Stent ) 1. Disposable Cath-Lab Gowns Light Blue Colour Full Size And Elastic Wrist Bands With Water / Blood Impenetrable Front And Hand Shielding - 3 Nos; 2.Disposable Sterile Drapes For Coronary Angiography / Angioplasty Compatible With Bilateral Femoral And Radial Approaches - 1No; 3.Disposablegauze Pieces In ( Eto Sterilizable ) Packs Of 10 For Use With Cath Lab Procedures - 10Nos; 4.Teflon Coated Guide Wires 145 Cms 0.035St & J - 1No; 5.Arterial Pressure Monitoring Transducers ( Disposable ) - 1No; 6.Initial Puncture Needles18g - 1No; 7.Femoral Pci Sheath Systems Size 5F To 9Fwith Accessories For Insertion - 2Nos; 8. Ptca Wire - 1 No; 9.3 Ring Control Syringes For Cag / Ptca 20Cc - 1No; 10. 3 / 3 Rotating Manifold For Cag / Ptca-1No; 11. Touhey Borst Y Connector- Push Pull Type And Introducer Needle For Ptca - 1No; 12.Ptca Guiding Catheter - 1No; 13.3 Ring Finger Control Syringe 12 Cc - 1No; 14.Infusion Accelerator ( Pressure Bag ) -1No; 15.Rapid Exchange Balloonsystems With Semi-Compliant / Compliant Design With Excellent Trackability And High Inflation Pressures - 1No; 16.Non-Compliant Balloons For Ptca - 1No; 17.Drug Eluting Stents Fda / Dcgi / Ce Approved-1 No; .Should Be Fda / Ce / Dcgi Approved , ( S ) Femoral Angioplasty Kit ( 2 Stent ) 1. Disposable Cath-Lab Gowns Light Blue Colour Full Size And Elastic Wrist Bands With Water / Blood Impenetrable Front And Hand Shielding - 3 Nos; 2.Disposable Sterile Drapes For Coronary Angiography / Angioplasty Compatible With Bilateral Femoral And Radial Approaches - 1No; 3.Disposablegauze Pieces In ( Eto Sterilizable ) Packs Of 10 For Use With Cath Lab Procedures - 10Nos; 4.Teflon Coated Guide Wires 145 Cms 0.035St & J - 1No; 5.Arterial Pressure Monitoring Transducers ( Disposable ) - 1No; 6.Initial Puncture Needles18g - 1No; 7.Femoral Pci Sheath Systems Size 5F To 9Fwith Accessories For Insertion - 2Nos; 8. Ptca Wire- 1 No; 9.3 Ring Control Syringes For Cag / Ptca 20Cc - 1No; 10. 3 / 3 Rotating Manifold For Cag / Ptca-1No; 11. Touhey Borst Y Connector- Push Pull Type And Introducer Needle For Ptca - 1No; 12.Ptca Guiding Catheter - 1No; 13.3 Ring Finger Control Syringe 12 Cc - 1No; 14.Infusion Accelerator ( Pressure Bag ) -1No; 15.Rapid Exchange Balloonsystems With Semi-Compliant / Compliant Design With Excellent Trackability And High Inflation Pressures - 1No; 16.Non-Compliant Balloons For Ptca - 1No; 17.Drug Eluting Stents Fda / Dcgi / Ce -2 Nos;.Should Be Fda / Ce / Dcgi Approved , ( S ) Radial Angioplasty Kit ( 1 Stent ) 1. Disposable Cath-Lab Gowns Light Blue Colour Full Size And Elastic Wrist Bands With Water / Blood Impenetrable Front And Hand Shielding - 3 Nos; 2.Disposable Sterile Drapes For Coronary Angiography / Angioplasty Compatible With Bilateral Femoral And Radial Approaches - 1No; 3.Disposablegauze Pieces In ( Eto Sterilizable ) Packs Of 10 For Use With Cath Lab Procedures - 10Nos; 4.Teflon Coated Guide Wires 145 Cms 0.035St & J - 1No; 5.Arterial Pressure Monitoring Transducers ( Disposable ) - 1No; 6.Initial Puncture Needles18g - 1No; 7.Transradial Sheath Systems Size 6F With Accessories For Insertion - 1Nos 8. Ptca Wire - 1 No; 9.3 Ring Control Syringes For Cag / Ptca 20Cc - 1No; 10. 3 / 3 Rotating Manifold For Cag / Ptca-1No; 11. Touhey Borst Y Connector- Push Pull Type And Introducer Needle For Ptca - 1No; 12.Ptca Guiding Catheter - 1No; 13.3 Ring Finger Control Syringe 12 Cc - 1No; 14.Infusion Accelerator ( Pressure Bag ) -1No; 15.Rapid Exchange Balloonsystems With Semi-Compliant / Compliant Design With Excellent Trackability And High Inflation Pressures - 1No; 16.Non-Compliant Balloons For Ptca - 1No; 17.Drug Eluting Stents Fda / Dcgi / Ce Approved -1 No; .Should Be Fda / Ce / Dcgi Approved , ( S ) Radial Angioplasty Kit ( 2 Stent ) 1. Disposable Cath-Lab Gowns Light Blue Colour Full Size And Elastic Wrist Bands With Water / Blood Impenetrable Front And Hand Shielding - 3 Nos; 2.Disposable Sterile Drapes For Coronary Angiography / Angioplasty Compatible With Bilateral Femoral And Radial Approaches - 1No; 3.Disposablegauze Pieces In ( Eto Sterilizable ) Packs Of 10 For Use With Cath Lab Procedures - 10Nos; 4.Teflon Coated Guide Wires 145 Cms 0.035St & J - 1No; 5.Arterial Pressure Monitoring Transducers ( Disposable ) - 1No; 6.Initial Puncture Needles18g - 1No; 7.Transradial Sheath Systems Size 6F With Accessories For Insertion - 1Nos; 8. Ptca Wire - 1 No; 9.3 Ring Control Syringes For Cag / Ptca 20Cc - 1No; 10. 3 / 3 Rotating Manifold For Cag / Ptca-1No; 11. Touhey Borst Y Connector- Push Pull Type And Introducer Needle For Ptca - 1No; 12.Ptca Guiding Catheter - 1No; 13.3 Ring Finger Control Syringe 12 Cc - 1No; 14.Infusion Accelerator ( Pressure Bag ) -1No; 15.Rapid Exchange Balloonsystems With Semi-Compliant / Compliant Design With Excellent Trackability And High Inflation Pressures - 1No; 16.Non-Compliant Balloons For Ptca - 1No; 17.Drug Eluting Stent Fda / Dcgi / Ce Approved -2 No;.Should Be Fda / Ce / Dcgi Approved , ( S ) 20Cc Inflation Deviceas One Set Capable Of Inflation Pressures Upto 30 Bar.Should Be Fda / Ce / Dcgi Approved , ( S ) Inflation Device To Inflate Low And High Pressure Upto 40 Atm.Should Be Fda / Ce / Dcgi Approved , ( S ) Ptca Manifold With Flush Device.Should Be Fda / Ce / Dcgi Approved , ( S ) Infusion Accelerator ( Pressure Bag ) .Should Be Fda / Ce / Dcgi Approved , ( S ) 3 Ring Control Syringes For Cag / Ptca 12Cc.Should Be Fda / Ce / Dcgi Approved , ( S ) 3 Ring Control Syringes For Cag / Ptca 20Cc.Should Be Fda / Ce / Dcgi Approved , ( D ) Thrombus Extraction Catheters For Primary Ptca.Should Be Fda / Ce / Dcgi Approved , ( D ) Coronary Microcatheters ( 0.014 Compatable ) .Should Be Fda Or Ce Anddcgi Approved , ( D ) Shock Wave Assisted Balloons For Calcified Lesions.Should Bece And Dcgi Approved , ( D ) Shock Wave Assembly And Delivery System For Ballooons.Should Bece And Dcgi Approved , ( D ) Ultra High Pressure ( 30 And Above ) Non Compliant Coronary Balloons For Sevrely Calcified Stenosis ( All Sizes ) .Should Bece And Dcgi Approved , ( D ) Coronary Microcatheters For Cto Entry- Braided With Cutting Tip.Should Be Fda Or Ce Anddcgi Approved , ( D ) Steerable Microguide Catheters For Sidebranch Entry -Dual Lumen Type ( Over The Wire And Monorail ) .Should Be Fda Or Ce And Dcgi Approved , ( D ) Micro Catheters For Visceral Angio Embolisation-Should Be Hydrophilic And 0.021 Compatable.Should Be Fda Or Ce And Dcgi Approved , ( D ) Retrograde Coronary Collateral Channel Dilator .Should Be Fda Or Ce And Dcgi Approved , ( S ) Superselective Cathetor For Mother And Child Technique.Should Be Fda Or Ce And Dcgi Approved , ( S ) Soft Guidelinerfor Mother And Child Technique.Should Be Fda Or Ce And Dcgi Approved , ( D ) Intravascular Ultrasound Catheters Compatiblewith Volcano Ivus System .Should Be Fda / Ce / Dcgi Approved , ( D ) Intravascular Ultrasound Catheters Compatiblewith Ilab Ivus System With Pull Back Slut.Should Be Fda / Ce / Dcgi Approved , ( D ) Oct Catheters .Should Be Fda / Ce / Dcgi Approved , ( D ) Radi 014 Ffr Wires.Should Be Fda / Ce / Dcgi Approved , ( D ) Radi 014 Ffr Wires Wireless.Should Be Fda / Ce / Dcgi Approved , ( D ) Volcano 014 Ffr Wires.Should Be Fda / Ce / Dcgi Approved , ( D ) Ffr Wire Compatible With Ilab.Should Be Fda / Ce / Dcgi Approved , ( D ) Rotablator Wire 009.Should Be Fda / Ce / Dcgi Approved , ( D ) Rotablator Advancer.Should Be Fda / Ce / Dcgi Approved , ( D ) Opn Type Ultra High Pressure Highly Non Compliant Balloon .Should Be Fda Or Ce And Dcgi Approved , ( D ) Rotablator Burr.Should Be Fda / Ce / Dcgi Approved , ( S ) Swan Ganz Capable Of Accommodating 0.038 Guide Wire Large Lumen Size7f .Should Be Fda / Ce / Dcgi Approved , ( S ) Swan Ganz Capable Of Accommodating 0.032 / 035 Guide Wire Large Lumen Size6f .Should Be Fda / Ce / Dcgi Approved , ( S ) Berman Balloon Angio Caths With Side Holes 5F, 6F.Should Be Fda / Ce / Dcgi Approved , ( S ) Balloon Temporary Pacing Leads 5F, 6F.Should Be Fda / Ce / Dcgi Approved , ( S ) Woven Dacron Catheter With Platinum Tip Elecrode For Trasvenous Temporary Pacing 5F / 6F.Should Be Fda / Ce / Dcgi Approved , ( S ) Temporary Pacing Leads Sizes With 5F / 6F.Should Be Fda / Ce / Dcgi Approved , ( S ) Balloon Flow Assisted Temporary Pacing Lead ( 5F And 6F .Should Be Fda / Ce / Dcgi Approved , ( S ) Accessories For Accura Based Mitral Valvuloplasty Systems.Should Bece And Dcgi Approved , ( Ex ) All Sizes Of Ptmc Balloons- Reusable.Should Be Fda / Ce / Dcgi Approved , ( Ex ) All Sizes Of Mitral Valve Balloon Dilatation Systems With Reusable Latex Rubber Balloon Design And Accessories To Be Quoted.Should Be Fda / Ce / Dcgi Approved , ( S ) Pressure Manometer Lines Male / Female 150 Cm.Should Be Fda / Ce / Dcgi Approved , ( S ) Pressure Manometer Lines Male / Male 150 Cm.Should Be Fda / Ce / Dcgi Approved , ( S ) Three Way Stopcocks.Should Be Fda / Ce / Dcgi Approved , ( S ) High Pressure Contrast Injection Tube.Should Be Fda / Ce / Dcgi Approved , ( S ) High Flow Angio Flush Caths.Should Be Fda / Ce / Dcgi Approved , ( S ) Left Internal Mammary Guide Catheter5 F, 6F And & 7F .Should Be Fda / Ce / Dcgi Approved , ( S ) Braided Multipurpose Guide Caths ( 5F And 6F ) .Should Be Fda / Ce / Dcgi Approved , ( S ) Soft Tipped Braided Guide Catheters For ( 4F, 5F ) For Coronary / Visceral Use.Should Be Fda Or Ce And Dcgi Approved , ( S ) Braided Simmons Shaped Cerebral Caths.Should Be Fda / Ce / Dcgi Approved , ( S ) Renal Double Curve Guide Catheter 4F, 5F80cm , 120 Cm, 140 Cm.Should Be Fda / Ce / Dcgi Approved , ( S ) Terumo Glide Catheter 4F, 5F And 6 F.Should Be Fda / Ce / Dcgi Approved , ( S ) Yashiro Glide Catheter 4F, 5F 80 Cm, 120 Cm, 140Cm.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Peripheral Balloons ( 0.035 Compatable ) For Femoro Popliteal And Iliac Lesions.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Renal Balloon ( 0.014 Compatable ) .Should Be Fda / Ce / Dcgi Approved , ( S ) 4 F And 5 F Catheter Compatable Peri Membraneuous Vsd Device With Double Screw Design For Antegrade And Retrograde Closure.Should Bece And Dcgi Approved , ( Ex ) Carotid And Btk Balloons ( 0.014 Compatable ) .Balloon Shaft Length Should Be160 Cmand Above.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Small Vessel Balloon ( Diameters Should Be From 1Mm To 4Mm ) All Lengths.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Periph / Renal / Carotid Guiding-100 Cm And Longer.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Renal Stents -0.014 Compatable Balloon Mounted Shaft Length 80 Cm- All Sizes.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Self Expanding Femoro Popliteal Stents - All Diameters.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Dilators Of Coons Type For Serial Vascular Dilation For Large Access .Should Be Ce And Dcgi Approved , ( Ex ) Balloon Expandable Stents Peripheral- All Sizes.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Self Expanding Iliac Stents - All Diameters.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Carotid Distal Protection Devices.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Carotid Stents Taperingself Expanding.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Carotid Stentsstraight Self Expanding.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Nitinol Vascular Plugs For Embolisation.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Stent Grafts For Visceral Vascular System ( Should Be Highy Trackable, 0.035 Compatable ) .Should Be Fda / Ce / Dcgi Approved , ( S ) Sizing Balloons For Asd / Pda.Should Be Fda / Ce / Dcgi Approved , ( D ) Vena Cava Filter- Retrivable, Jugular Deployement.Should Be Fda / Ce / Dcgi Approved , ( D ) Vena Cava Filter- Retrivable, Femoral Deployement.Should Be Fda / Ce / Dcgi Approved , ( D ) Vena Cava Filter- Retrival System .Should Be Fda / Ce / Dcgi Approved , ( S ) Peripheral Guide Wires& Speciality Wires Exchange Length ( 0.018 ) .Should Be Fda / Ce / Dcgi Approved , ( S ) Peripheral Guide Wires& Speciality Wires Exchange Length ( 0.035 ) .Should Be Fda / Ce / Dcgi Approved , ( S ) Road Runner Polymer Coated Wire 035 Staright And J.Should Be Fda / Ce / Dcgi Approved , ( S ) Peripheral Chronic Total Occlusion Wires 0.014, 0.0.35 Diameter.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Embolization Coils 035 All Sizes.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Embolization Coils 0.038 To 052 All Sizes.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Embolization Micro Coils 018 All Sizes - Non Detachable And Freely Deliverable.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Embolization Micro Coils 018 All Sizes -Detachable 2D.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Vascular Embolisation Nitinol Based Occluders All Sizez With Delivery System.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Embolization Micro Coils 018 All Sizes -Detachable 3D.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Endovascular Snares With Metal Tip.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Endovascular Snares With Polymer Tip.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Endovascular Snares Gooseneck.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Embolisation Particles Poly Vinyl Alcohol All Sizes.Should Be Fda / Ce / Dcgi Approved , ( S ) Super Absorbant Polymer Microspheres For Drug ( Doxorubucin ) Adsorption For Tace.Should Be Fda / Ce / Dcgi Approved , ( S ) Gelfoam ( Powder Or Granule Form ) For Embolization.Should Be Fda / Ce / Dcgi Approved , ( S ) N-Butyl Cyanoacrylate Glue For Embolization .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Microcatheters With Inbuilt Hydrophilic Wire For Peripheral Angiography And Particle / Coil Delivery.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Microcatheters - Steerable / Shapable With Inbuilt Hydrophilic Wire For Peripheral Angiography And Particle / Coil Delivery.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Large Diametercovered Aorta-Arch And Zone 2Stent Grafts Taa All Sizes.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Aorto Uni Iliac Stent Coveredgrafts All Sizes.Should Bece And Dcgi Approved , ( Ex ) Aortic Stent Covered Graftsfor Dta Aneurysm Stenting .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Bare Aortic Stents For Coarctation ( Sizes Should Be Above 20Mm Up To 40Mm ) -Only Baloon Expandable Design.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Covered Aortic Stents ( Balloon Expandable Only ) For Aortic Coarctation . Diameters Should Be 20Mm And Above.Should Bece And Dcgi Approved , ( Ex ) Low Profile Dacron / Ptfe Covered Stent Grafts ( 20-45Mm ) For Sealing Extensive Aortic Dissection .Should Bece And Dcgi Approved , ( Ex ) Low Profile Hydrophilic Sheaths For Aortic Procedures ( 12 F And Above ) .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Covered Stent Grafts For Aortic Arch Aneurysm Withonsite Fenestraion Capability.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Aortic Covered Stent Grafts ( Straight ) Capable For Fenestration For Justa Renal And Juxta Subclavain Aneurysms And Traumatic Aortic Injury.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Abdominal Aortic Aneurysm Stent Grafts With Iliac Limbs For Abd Aorta Aneurysm.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Asd Devices: Allcutomised Sizes From 8Mm To 50 Mm.Should Bece And Dcgi Approved , ( Ex ) Ultra Compliant Linear Sizing Balloons With Markers ( 34Mm To 44Mm ) For Balloon Asssited Device Deployment Compatable With Contralateral 8F Sheath.Should Be Ce / Dcgi Approved , ( Ex ) Ultra Compliant Linear Sizing Balloons With Markers ( 24Mm To 34Mm ) For Balloon Asssited Device Deployment Compatable With Contralateral 7F Sheath.Should Be Ce And Dcgi Approved , ( Ex ) Cook Sheaths ( All Sizes 6F-15F ) With Check Flo Valves ) With Angled Tips For Asd Device Delivery.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Fenestrated Asd Device For Mutiple Septal Defects.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Asd Amplatzer Type Self Centre Devices With All Sizes From 8Mm And Above .Should Be Fda Approved , ( Ex ) Pda Occusion Device --All Customisable Sizes With From 3Mm To 20Mm Waist Size .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Delivery System And Cable Set For Pda Occlusion Devie ( 4F- 12 F ) .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Ado-1 Device For All Morphology.Should Be Fda Or Ce Anddcgi Approved , ( Ex ) Duct Occlusion Device Delivery System Nontaperingsheaths With Sidearm+Introducer Cable Set .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Pda Occusion Device With Dual Discs Of Equal Size .Should Be Fda Or Ce Anddcgi Approved , ( Ex ) Pda Delivery Systems And Introducer Cable Systems .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Ventricular Septal Closure Devices All Sizes ( 4Mm To18 Mm ) .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Delivery Cable And Sheath Set For Ventricular Septal Defect Closure.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Muscular Vsd Closure Devices-All Sizes And Types .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Low Profile Delivery Sheath And Cable For Vsd Closure Devices ( 5F To 14F ) .Should Be Ce And Dcgi Approved , ( Ex ) Low Profile Duct Occluder Device For Neonates And Infants.Should Bece And Dcgi Approved , ( Ex ) Ventricular Septal Closure Devices All Sizes With Delivery System.Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Atrial Septal Occluder ( Self Centering ) For Complex Morphology With Balloon Assisted Delivery .Should Be Fda Or Ce Anddcgi Approved , ( Ex ) Post Infarct Ventricular Septal Rupture Closure Devices- All Sizes And Types.Fda Approved , ( Ex ) Purple Recovery Sheaths For Embolised Asd Devices-16 F And Above Size.Should Be Fda Approved , ( Ex ) Large Sized Atrial Septal Occluders Above 40Mm Size.Should Bece And Dcgi Approved , ( Ex ) Vascular Plug Closure Devices For Coronary And Pulmonary Av Fistula.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Ventricular Septal Defect ( Device Alone ) For Antegrade Closure .Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Dual Disc Nitinol Biocompatable Layer Coat Secundum Type Atrial Occluders ( All Sizses ) For Pre Assembled Delivery System.Should Be Fda Or Ce Anddcgi Approved , ( Ex ) Extra Soft Nitinol Multi Functional Closure Devices Compatable With Guide Catheter Delivery.Should Be Ce / Dcgi Approved , ( Ex ) Left Atrial Appendage Closure Device.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Left Atrial Appendage Closure Delivery System.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Single Disc Occluders With Device Alone With Sizes From 3Mm Onwards Up To 20 Mm ..Should Be Fda Or Ce Anddcgi Approved , ( Ex ) Trans Catheter Aortic Valve ( Self Expanding ) .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Trans Catheter Aortic Valve ( Balloon Expanding ) .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Trans Catheter Aortic Valve Delivery Sheath ( Self Expanding ) .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Trans Catheter Aortic Valve Delivery Sheath ( Balloon Expanding ) .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Large Diametre ( 14-20Mm ) Balloon Expanding Aortic / Vena Caval Stents.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Large Bore Low Profile Manual Aspiration System For High Thrombus Load.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Ultra Low Profile Semi Compliant Coronary Balloons For Chronic Total Occlusions.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Ultra High Pressure Above 25 Atm Non Compliant Balloon System For Calcified Lesions.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Balloon Expandable Covered Stents ( Sizes 5-20Mm ) For Fenestrated Tevar / Evar.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Covered Self Expanding Covered Stent Grafts For Anurysm And Leaks ( 4Mm To 12Mm ) .Should Be Fda Or Ce Anddcgi Approved , ( Ex ) Coda Balloon For Optimalaortic Stent Expansion .Should Be Fda Or Ce And Dcgi Approved , ( Ex ) Anzel Sheaths For Fenestarted Evar .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Braided Kink Resistant Long ( 100-120Cm ) Delivery Sheaths For Vsd Closure.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Braided Kink Resistant Flexible Sheaths ( 60-100Cm ) For Fenestarted Tevar And Carotid Interventions-Straight And Curved.Should Be Fda / Ce / Dcgi Approved , ( S ) Angioseal Type-Sponge Based Vascular Closure System.Should Bece And Dcgi Approved , ( Ex ) Radiation Protection Drape Pads.Should Be Fda / Ce / Dcgi Approved , ( S ) Gel Foam Powder For Angio Embolisation.Should Be Fda Or Ce Anddcgi Approved , ( Ex ) Cyanoacrylate Glue For Sealing Coronary Perforation.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Dissection Re Entry Balloon For Coronary Cto.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Sub Intimal Tracking Device For Cto.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Large Bore Long Femoral Sheaths 12-18 F For Aortic / Tavi Interventions.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Suture Based Haemostasis Device Forlarge Bore Femoral Access.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Scoring Balloons For Debulking Calcified Lesions.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Vascular Plugs With Delivery Systems And Sheaths.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Expandable Femoral Sheaths.Should Be Fda / Ce / Dcgi Approved , ( S ) Str Shaped Woven Dacron Intra Coronary Guide Catheter ( Above 100 Cm Length ) .Should Bece And Dcgi Approved , ( S ) Slender Sheaths For Radial Access -Should Be Expandable.Should Bece And Dcgi Approved , ( S ) Coronary Micro Snares.Should Be Ce And Dcgi Approved , ( Ex ) Bioptome For Coil Delivery.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Pulmonary / Aortic Balloon Systems Comprising Of Pulmonary Valvuloplasty Balloons All Sizs, Curves And Lengths .Should Be Fda / Ce / Dcgi Approved , ( Ex ) Single Diameter Aortic Valvuloplasty Balloons Of Cribier-Letac All Sizes And Lengths.Should Be Fda / Ce / Dcgi Approved , ( Ex ) High Pressure Non Compliant Peripheral Balloons- ( Sizes From 4Mm-10Mm ) 0.035 Compatable ( All Lengths ) .Should Be Ce And Dcgi Approved , ( Ex ) Stepped Diameter Balloons Cribier- Letac All Sizes And Lengths.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Pediatric Valvuloplasty Balloons With Accelerator, Bifoil Balloons, Trifoil Balloons All Sizes.Should Be Fda / Ce / Dcgi Approved , ( S ) Amplatz Apex Jextra Stiffguide Wire Exchange Lengths.Should Be Fda / Ce / Dcgi Approved , ( S ) 14 F Balloon Introducer Systems.Should Be Fda / Ce / Dcgi Approved , ( Ex ) Cook Long Sheaths Capable Of Asd / Vsd / Pda Device Deliverysizes 6Fto 16F.Should Be Fda / Ce / Dcgi Approved , ( S ) Initial Puncture Needles18g.Should Be Fda / Ce / Dcgi Approved , ( S ) Micropuncture Neonatal Introducer Sets And Sheath Systems 4F, 5F.Should Be Fda / Ce / Dcgi Approved , ( S ) Guide Wire 38, A Cook Hiwire 150Cm.Should Be Fda / Ce / Dcgi Approved , ( S ) Cardiac Multipacks Comprising Of Ventricular Pig Tail Catheter, Left Coronary Catheter, Right Coronary Catheter, Catheter Introducer Sheath All Sizes.Should Be Fda / Ce / Dcgi Approved , ( S ) Guide Extension Catheter, .Should Be Fda / Ce / Dcgi Approved , ( S Balloon Atrial Septostomy Catheter.Should Be Fda / Ce / Dcgi Approved , ( S ) Transseptal Catheter .Should Be Fda / Ce / Dcgi Approved , ( S ) Brockenborough Needle Adult .Should Be Fda / Ce / Dcgi Approved , ( S ) Brockenborough Needle Pediatrics .Should Be Fda / Ce / Dcgi Approved , ( S ) Mullins Sheath With Matching Dilator Withsidearm 6F To 14 F All Sizes.Should Be Fda / Ce / Dcgi Approved , ( S ) Mullins Sheath With Matching Dilator With Out Sidearm 6F, 7F, 8F.Should Be Fda / Ce / Dcgi Approved , ( S ) Balkan Contralateral Sheath 6F, 7F, 8F.Should Be Fda / Ce / Dcgi Approved , ( S ) Mullins Sheath Child.Should Be Fda / Ce / Dcgi Approved , ( S ) Bipolar Temporary Pacing Electrodes, Sizes: 4F, 5F, 6F .Should Be Fda / Ce / Dcgi Approved , ( S ) Contrast Media For Angiography And Angioplasty ( Non-Ionic 350 / 370 100 Ml Bottles ) .Should Be Fda / Ce / Dcgi Approved , ( S ) Contrast Media For Angiography And Angioplasty ( Non-Ionic 350 / 370 50 Ml Bottles ) .Should Be Fda / Ce / Dcgi Approved , ( S ) Iso Osmolar Contrast Media For Angiography And Angioplasty For Patients With Renal Dysfunction ( Non-Ionic 350 / 370 100 Ml Bottles ) .Should Be Fda / Ce / Dcgi Approved , ( S ) Iso Osmolar Contrast Media For Angiography And Angioplasty For Patients With Renal Dysfunction ( Non-Ionic 350 / 370 50 Ml Bottles ) .Should Be Fda / Ce / Dcgi Approved , ( S ) Myocardial Echocardiographic Contrast Comprising Of Sulphur Hexachloride Or Equivalent Micro Bubbles.Should Be Fda / Ce / Dcgi Approved , ( S ) Bioptomes For Endomyocardial Biopsy : Bioptomes ; 5.2F. Should Be Fda / Ce / Dcgi Approved , ( S ) Radial Sheaths With Introducer Needle, Guide Wire And Dilator: Complete Set:.Should Be Fda / Ce / Dcgi Approved , ( S ) Oximetry Cuvets For Avoximeter.Should Be Fda / Ce / Dcgi Approved , Inj Tirofiban 100 Ml Bottles.Should Be Fda / Ce / Dcgi Approved , Inj Bivaluridin.Fda Approved , ( S ) Troponin Iquantitative Bed Side Test Kit .Should Be Fda / Ce / Dcgi Approved Measuring Device To Be Supplied , ( S ) Troponin Tquantitative Bed Side Test Kit.Should Be Fda / Ce / Dcgi Approved Measuring Device To Be Supplied , ( S ) High Sensitive Troponin T Quantitive Quantitative Bed Side Test Kit.Should Be Fda / Ce / Dcgi Approved Measuring Device To Be Supplied , ( S ) High Sensitive Troponin I Quantitative- Fda Approved-Analyser Should Be Supplied.Should Be Fda Approved Measuring Device To Be Supplied , ( S ) N-Terminal Pro Bnp Quantitative Bed Side Test Kit.Should Be Fda / Ce / Dcgi Approved Measuring Device To Be Supplied , ( S ) N-Terminalbnpquantitative Bed Side Test Kit.Should Be Fda / Ce / Dcgi Approved Measuring Device To Be Supplied , ( S ) D-Timer Quantitative Bed Side Test Kit.Should Be Fda / Ce / Dcgi Approved Measuring Device To Be Supplied , ( S ) Ngal Quantitative Bed Side Test Kit.Should Be Fda / Ce / Dcgi Approved Measuring Device To Be Supplied , ( S ) Bedside Lipid Profile Measurement Kits.Reading Machine Should Be Provided Free , ( S ) Bedside Inr Measurement Kits.Reading Machine Should Be Provided Free , ( S ) Vinyl Layered Lead Free Aprons Superior Quality Imported Types For Radiation Protection During Interventional Procedures. Covering Both Front And Backsingle Piece Medium Size.Should Be Fda / Ce / Dcgi Approved & Item To Be Demonstrated To Departmental Selection Committee , ( S ) Vinyl Layered Lead Free Aprons Superior Quality Imported Types For Radiation Protection During Interventional Procedures. Covering Both Front And Backtwopiece Skirt And Blouse Type Medium Size. .Should Be Fda / Ce / Dcgi Approved & Item To Be Demonstrated To Departmental Selection Committee , ( S ) Vinyl Layered Lead Free Aprons Superior Quality Imported Types For Radiation Protection During Interventional Procedures. Covering Both Front And Backtwopiece Skirt And Blouse Type Large Size.Should Be Fda / Ce / Dcgi Approved & Item To Be Demonstrated To Departmental Selection Committee , ( S ) Thyroid Collars Radiation Protection.Should Be Fda / Ce / Dcgi Approved & Item To Be Demonstrated To Departmental Selection Committee , ( S ) Gonadal Shields Radiation Protection.Should Be Fda / Ce / Dcgi Approved & Item To Be Demonstrated To Departmental Selection Committee , ( S ) Radaiation Protective Eye Goggles.Should Be Fda / Ce / Dcgi Approved & Item To Be Demonstrated To Departmental Selection Committee , ( S ) Radaiation Protective Head Gear.Should Be Fda / Ce / Dcgi Approved & Item To Be Demonstrated To Departmental Selection Committee , ( S ) Cath-Lab Cotton Dress Shirt Withthree Pockets And Pyjama With Pockets Large And Medium Sized Light Blue Colour With Label Of “ Cath-Lab Jipmer” On Both The Shirt And The Pyjama And Size Printed.Sample To Be Supplied , ( S ) Disposable Cath-Lab Gowns Light Blue Colour Full Size And Elastic Wrist Bands With Water / Blood Impenetrable Front And Hand Shielding.Should Be Fda / Ce / Dcgi Approved , ( S ) Glucometer Test Strips With Four Glucometers.Should Be Fda / Ce / Dcgi Approved , ( D ) Single Chamber Demand Cum Overdrive Temporary Pulse Generatorsin Various Dual Chamber And Single Chamber Modes.Should Be Fda / Ce / Dcgi Approved , ( D ) Dual Chamber Demand Cum Overdrive Temporary Pulse Generatorsin Various Dual Chamber And Single Chamber Modes.Should Be Fda / Ce / Dcgi Approved , 5 French Fixed Curve Quadripolar Catheter With 2-5-2 Interelectrode Spacing. One Matching Connector For Every 5 Catheters.Should Be Fda / Ce / Dcgi Approved , 6 French Deflectable Quadripolar Catheter With 2-5-2 Interelectrode Spacing And Matching Connector.Should Be Fda / Ce / Dcgi Approved , 6 French Deflectable Decapolar Catheter With 2-5-2 Interelectrode Spacing And Matching Connector.Should Be Fda / Ce / Dcgi Approved , 6 Or 7 French Deflectable Duodecapolar Catheters ( Halo ) With Matching Connectors.Should Be Fda / Ce / Dcgi Approved , Long Deflectable Sheath With Hemostatic Valve, Side Port, Atraumatic Tip, Braided Shaft, Uni- Or Bidirectional Steerability, Availability In Small, Medium Or Large Curves, Minimum Inner Diameter Or 7F, Minimum Length Of 65 Cms.Should Be Fda / Ce / Dcgi Approved , 7 French Quadripolar Radiofrequency Ablation Catheter With A 4 Mm Tip, Unidirectional Deflection, Availability In Small, Medium And Large Curves. Should Be Compatible With Stockert And Ibi Rf Generators And Suitable Connecting Cable Should Be Provided For Every 5 Catheters..Should Be Fda / Ce / Dcgi Approved , 7 French Quadripolar Radiofrequency Ablation Catheter With A 4 Mm Tip, Bidirectional Deflection, Availability In Small, Medium And Large Curves. Should Be Compatible With Stockert And Ibi Rf Generators And Suitable Connecting Cables Should Be Provided .Should Be Fda / Ce / Dcgi Approved , 7 French Quadripolar Radiofrequency Ablation Catheter With A 8 Mm Tip, Unidirectional Deflection, Availability In Medium And Large Curves. Should Be Compatible With Stockert And Ibi Rf Generators And Suitable Connecting Cable Should Be Provided For Every 5 Catheters..Should Be Fda / Ce / Dcgi Approved , 7 French Quadripolar Radiofrequency Ablation Catheter With Irrigated Tip, Uni- Or Bi-Directional Deflection And Availability In Medium And Large Curves. Should Be Compatible With Stockert And Ibi Rf Generators And Suitable Connecting Cable Should Be Provided For Every 5 Catheters..Should Be Fda / Ce / Dcgi Approved , Quadripolar, Irrigated Tip, Radiofrequency Ablation Catheter With A 3.5 Mm Tip And Unidirectional Deflection For Use With The Carto Mapping System. Should Include Irrigation Tubing Set For Interface Between The Irrigation Pump And The Ablation Catheter And Matching External Reference Patch For Use With The Carto 3 System.Should Be Fda / Ce / Dcgi Approved , Reusable Indifferent Electrode Pad Compatible With The Stockert Ablator.Should Be Fda / Ce / Dcgi Approved , Surface Electrode Kit For Use With The Ensite Navx System Including 3 Pairs Of Surface Patches, 10 Ecg Electrodes And 1 System Reference Electrode .Should Be Fda / Ce / Dcgi Approved , Ssir - Single Chamber Rate Responsive Implantable Multiprogrammable Pacemakerwith Maximum Programmable Sensitivity Of 0.5 Mv Or More With Matching Leads And Subclavian Introducer Set To Be Quoted As One Set. Active Fixation Leads Should Be Supplied As Atrial ( 50% ) / Ventricular ( 50% ) .Should Be Fda / Ce / Dcgi Approved , Vdd Implantable Multiprogrammable Pacemaker With Shortest Programmable Av Delay Of 50 Ms, With Matching Single Pass Steroid Eluting Vdd Lead And Matching Sublavian Introducer. .Should Be Fda / Ce / Dcgi Approved , Ddd - Dual Chamber Implantable Multiprogrammable Pacemaker With Shortest Programmable Av Delay Of 50 Ms, With Matching Set Of Steroid Eluting Active Fixation Atrial And Ventricular Leads And Two Matching Subclavian Introducers..Should Be Fda / Ce / Dcgi Approved , Dddr - Dual Chamber Rate-Responsive Implantable Multiprogrammable Pacemaker Withshortest Programmable Av Delay Of 50 Ms, With Matching Set Of Steroid Eluting Active Fixation Atrial And Ventricular Leads And Two Matching Subclavian Introducers..Should Be Fda / Ce / Dcgi Approved , Bipolar Lead Specially Designed For Placement In Coronary Sinus For Lv Pacing. Should Be Supplied With 9F Short Sheath With Valve, Long Preshaped Slittable Sheaths In Various Shapes For Cs Cannulation And Inner Subselective Sheath. Lead, Long Sheath, Subselective Sheath And Short Sheath Should Be Quoted As One Set..Should Be Fda / Ce / Dcgi Approved , Crt - Triple Chamber Pacing System Comprising Pacemaker, Active Atrial And Ventricular Leads And Bipolar, Over The Wire Coronary Sinus Lead. Should Include Long Preshaped Slittable Sheaths For Coronary Sinus Cannulation In Multiple Shapes, Subselective Inner Sheaths, Guidewire And Occlusion Balloon Catheter For Coronary Venography. Coronary Sinus Lead Should Be Available In Multiple Curves / Sizes..Should Be Fda / Ce / Dcgi Approved , Aicd - Single Chamber, Implantable Cardioverter Defibrillator For Treatment Of Life Threatening Ventricular Arrhythmias With Facility For Bradycardia Pacing And Tiered Therapy For Tachycardias, Maximum Shock Energy Of At Least 35 J, With Matching Single And Dual Coil, Integrated Bipolar Active Fixation Ventricular Leads..Should Be Fda / Ce / Dcgi Approved , Aicd - Dual Chamber, Implantable Cardioverter Defibrillator For Treatment Of Life Threatening Ventricular Arrhythmias With Facility For Bradycardia Pacing And Tiered Therapy For Tachycardias, Maximum Shock Energy Of Atleast 35 J, With Matching Single And Dual Coil, Integrated Bipolar Active Fixation Atrial And Ventricular Leads..Should Be Fda / Ce / Dcgi Approved , Crt-D - Triple Chamber Pacemaker System With Cardioverter Defibrillator For Treatment Of Life Threatening Ventricular Arrhythmias With Facility For Crt Pacing And Tiered Therapy For Tachycardias, Maximum Shock Energy Of Atleast 35 J, With Matching Single And Dual Coil, Integrated Bipolar, Active Fixation Atrial And Ventricular Leads. .Should Be Fda / Ce / Dcgi Approved , Steroid Eluting Bipolar Active Fixation Atrial Leads With Introducer Sheath.Should Be Fda / Ce / Dcgi Approved , Steroid Eluting Bipolar Active Fixation Ventricular Leads With Introducer Sheath.Should Be Fda / Ce / Dcgi Approved , Single Pass Vdd Leads With Introducer Sheath.Should Be Fda / Ce / Dcgi Approved , Single And Dual Coil ( 50-50% ) , Integrated Bipolar Active Fixation Icd Leads.Should Be Fda / Ce / Dcgi Approved , Active Fixation Epicardial Leads .Should Be Fda / Ce / Dcgi Approved , Quadripolar Lead Specially Designed For Placement In Coronary Sinus For Lv Pacing. Should Be Supplied With 9F Short Sheath With Valve, Long Preshaped Slittable Sheaths In Various Shapes For Cs Cannulation And Inner Subselective Sheath. Lead, Long Sheath, Subselective Sheath And Short Sheath Should Be Quoted As One Set..Should Be Fda / Ce / Dcgi Approved , Implantable Loop Recorder For Subcutaneous Implantation, Capable Of Recording At Least One Channel Subcutaneous Ecg. Matching Hand-Held Activator Should Be Provided. .Should Be Fda / Ce / Dcgi Approved , Steerable, Long Sheath Introducer Of At Least 8F Inner Diameter, With Atraumatic Tip And Bidirectional Steering, Designed For Use In Epicardial Mapping.Should Be Fda / Ce / Dcgi Approved , Single Chamber Mri Conditional Pacemaker With Matching Atrial Or Ventricular Active Or Passive Fixation Lead And Introducer Sheath Set. .Should Be Fda / Ce / Dcgi Approved , Dual Chamber Mri Conditional Pacemaker With Matching Atrial And Ventricular Active Or Passive Fixation Leads And 2 Introducer Sheath Sets..Should Be Fda / Ce / Dcgi Approved , Disposable Heartstart Adult Plus Mutifunction Defibrillation Pads For Use With The Philips Defibrillator.Should Be Fda / Ce / Dcgi Approved , Disposable Pads For Defibrillation / Transcutaneous Pacing For Use With The Zoll Defibrillator.Should Be Fda / Ce / Dcgi Approved , ( S ) One Set Of High Grade Stainless Steel Surgical Instruments For Minor Surgical Procedure. Must Include The Following Instruments – Sponge Forceps 2 Nos, Towel Clamp – 4, Hemostatic Crile Forceps Straight – 4, Hemostatic Crile Forceps Curved – 6, Allis Tissue Forceps – 2, Mayo Hegar Needle Holder 6 Inches – 1, Mayo Hegar Needle Holder 7 Inches – 1, Mayo Scissors Straight – 1, Metzenbaum Scissors Curved – 1, Small Curved Scissors – 1, Small Straight Scissors – 1, Thumb Forceps – 2, Adsons Toothed Forceps – 2, Knife Handle #7 – 1, Knife Handle #4 – 1, Weitlaner Self Retaining Retractor Sharp 5 Inches – 1, Double Hook Retractor – 2, Right Angle Forceps – 1.Should Be Fda / Ce / Dcgi Approved & Item To Be Demonstrated To Departmental Selection Committee , ( S ) Lead Locking Device For Transvenous Extraction Of Chronically Implanted Pacemaker And Defibrillator Leads With Mechanical Rotating Dilator 9F / 11F / 13F Diameter With A Flexible Shaft And Dilator Sheath Set .Should Be Fda / Ce / Dcgi Approved , ( S ) Spo2 Probe Compaitable With Monitor Model : Space Labs.Should Be Fda / Ce / Dcgi Approved , ( S ) Ecg Probe Compaitable With Monitor Model : Space Labs.Should Be Fda / Ce / Dcgi Approved , ( S ) Bp Cuff Compaitable With Monitor Model : Space Labs.Should Be Fda / Ce / Dcgi Approved , ( S ) Spo2 Probe Compaitable With Monitor Model : Mindray Mec 2000.Should Be Fda / Ce / Dcgi Approved , ( S ) Ecg Leads Compaitable With Monitor Model : Mindray Mec 2000.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Adult ) Compaitable With Monitor Model : Mindray Mec 2000.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Paediatrics ) Compaitable With Monitor Model : Mindray Mec 2000.Should Be Fda / Ce / Dcgi Approved , ( S ) Bp Cuff ( Adult ) Compaitable With Monitor Model : Mindray Mec 2000.Should Be Fda / Ce / Dcgi Approved , ( S ) Bp Cuff ( Paediatrics ) Compaitable With Monitor Model : Mindray Mec 2000.Should Be Fda / Ce / Dcgi Approved , ( S ) Spo2 Probe Compaitable With Monitor Model : Star 55.Should Be Fda / Ce / Dcgi Approved , ( S ) Ecg Leads Compaitable With Monitor Model : Star 55.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Adult ) Compaitable With Monitor Model : Star 55.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Paediatrics ) Compaitable With Monitor Model : Star 55.Should Be Fda / Ce / Dcgi Approved , ( S ) Bp Cuff ( Adult ) Compaitable With Monitor Model : Star 55.Should Be Fda / Ce / Dcgi Approved , ( S ) Bp Cuff ( Paediatrics ) Compaitable With Monitor Model : Star 55.Should Be Fda / Ce / Dcgi Approved , ( S ) Spo2 Probe Compaitable With Monitor Model : Philips Mp 30.Should Be Fda / Ce / Dcgi Approved , ( S ) Ecg Leads Compaitable With Monitor Model : Philips Mp 30.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Adult ) Compaitable With Monitor Model : Philips Mp 30.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Paediatrics ) Compaitable With Monitor Model : Philips Mp 30.Should Be Fda / Ce / Dcgi Approved , ( S ) Bp Cuff ( Adult ) Compaitable With Monitor Model : Philips Mp 30.Should Be Fda / Ce / Dcgi Approved , ( S ) Bp Cuff ( Paediatrics ) Compaitable With Monitor Model : Philips Mp 30.Should Be Fda / Ce / Dcgi Approved , Act Catridges Compatible With Medtronic Act Machine.Should Be Fda / Ce / Dcgi Approved , ( S ) Arterial Pressure Monitoring Transducers ( Disposable ) .Should Be Fda / Ce / Dcgi Approved , ( S ) Syringe For Pressure Injector ( Disposable ) - Liebel Flarsheim Injector 100Ml.Should Be Fda / Ce / Dcgi Approved , ( S ) Spo2 Probe Disposable Compaitable With Multi Purpose Monitor Philips A3.Should Be Fda / Ce / Dcgi Approved , ( S ) Ecg Cable Compaitable With Multi Purpose Monitor Philips A3.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Adult ) Compaitable With Multi Purpose Monitor Philips A3.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Child ) Compaitable With Multi Purpose Monitor Philips A3.Should Be Fda / Ce / Dcgi Approved , ( S ) Spo2 Probe Disposable Compaitable With Multi Purpose Monitor Agilent.Should Be Fda / Ce / Dcgi Approved , ( S ) Ecg Cable Compaitable With Multi Purpose Monitor Agilent.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Adult ) Compaitable With Multi Purpose Monitor Agilent.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Child ) Compaitable With Multi Purpose Monitor Agilent.Should Be Fda / Ce / Dcgi Approved , ( S ) Spo2 Probe Disposable Compaitable With Multi Purpose Monitor Mec 1200.Should Be Fda / Ce / Dcgi Approved , ( S ) Ecg Cable Compaitable With Multi Purpose Monitor Mec 1200.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Adult ) Compaitable With Multi Purpose Monitor Mec 1200.Should Be Fda / Ce / Dcgi Approved , ( S ) Nibp Cuff ( Child ) Compaitable With Multi Purpose Monitor Mec 1200.Should Be Fda / Ce / Dcgi Approved , ( S ) Superior Quality Ecg Jelly In Bottles Of 250 G Long Lasting .Should Be Fda / Ce / Dcgi Approved , ( S ) Superior Quality Ecg Echo Jelly In Bottles Of 250 G Long Lasting .Should Be Fda / Ce / Dcgi Approved , ( S ) Quick Clot - Hydrophilic Non Woven Gauze Roll Impregnated With A Naturally Occuring Inorganic Mineral -Kaolin, Along With A Unique Direct Pressure Adhesive Bandage Packed In A Foil Pouch For Aseptic Removal..Should Be Fda / Ce / Dcgi Approved , ( S ) Mortara Eli-250 Machinecable.Should Be Fda / Ce / Dcgi Approved , ( S ) Mortara Eli 350 Machinecable.Should Be Fda / Ce / Dcgi Approved , ( S ) Chest Bulbs Adult.Should Be Fda / Ce / Dcgi Approved , ( S ) Chest Bulbs Pediatrics.Should Be Fda / Ce / Dcgi Approved , ( S ) Limb Leads Adult.Should Be Fda / Ce / Dcgi Approved , ( S ) Limb Leads Pediatrics.Should Be Fda / Ce / Dcgi Approved , ( S ) Biocare Ecg Recorder Paper.Should Be Fda / Ce / Dcgi Approved , ( S ) Mortara Eli-250 Ecg Recorder Head.Should Be Fda / Ce / Dcgi Approved , ( S ) Mortara Eli-350 Ecg Recorder Head.Should Be Fda / Ce / Dcgi Approved , ( S ) Mortara Tmt Paper.Should Be Fda / Ce / Dcgi Approved , ( S ) Mortara Eli-350 Ecg Paper..Should Be Fda / Ce / Dcgi Approved , ( S ) Mortara Eli-250 Ecg Paper..Should Be Fda / Ce / Dcgi Approved , ( S ) Edan Multichannel Machine Paper.Should Be Fda / Ce / Dcgi Approved , ( S ) Nihon Koden Multichannel Machine Paper Roll Type.Should Be Fda / Ce / Dcgi Approved , ( S ) Ag / Agcl Imported Patient Prejelled Electrodes For Long-Term Monitoring Superior Quality .Should Be Fda / Ce / Dcgi Approved , ( S ) Patient Tubing System Compatible With Maquet S Ventilator.Should Be Fda / Ce / Dcgi Approved , ( S ) Spot Test Kits For Hiv .Should Be Fda / Ce / Dcgi Approved , ( S ) Spot Test Kits For Hbsag .Should Be Fda / Ce / Dcgi Approved , ( S ) Spot Test Kits For Hcv .Should Be Fda / Ce / Dcgi Approved , ( S ) Stickymats / Tacky Mats 1 To 30 On 30 Peel Tags, Anti Ststic, With Holding Stick Time : > 1000 Mins, Price Per Box To Be Quoted With Number Of Units Per Box.Should Be Fda / Ce / Dcgi Approved , ( S ) Disposable Sterile Drapes For Coronary Angiography / Angioplasty Compatible With Bilateral Femoral And Radial Approaches With Absorbable Material.Sample To Be Supplied For Testing , ( S ) Disposable Sterile Drapes For Permanent Pacemaker Implantationl And R Pectoral Approaches.Sample To Be Supplied For Testing , ( S ) Tissue Paperbaseddisposable Bed Covers In Continious Rolls Of Width 90Cm For Use On Trolleys & Cardiac Cath Lab Tables..Sample To Be Supplied For Testing , ( S ) Disposable Sterile Angioplasty Drapes Kits Witha. One Unit -Drape Angioplasty Compatible With Bilateral Femoral And Radial Approaches With Absorbable Material B. Three Unitsdisposable Sterile Gowns C. One Unit Disosable Centre Hole Towel D. One Unit Cath Trolleydrape.Sample To Be Supplied For Testing , ( S ) Disposable Gown & Pyjama Set For Cath Lab Procedure ( Small / Medium / Large ) .Sample To Be Supplied For Testing , ( S ) Disposablegauze Pieces In ( Eto Sterilizable ) Packs Of 10 For Use With Cath Lab Procedures.Sample To Be Supplied For Testing , ( D ) Battery Operated Automated Digital Bp Apparatus With Adult, Large Adult And Pediatric Cuffs With 3 Yr Warranty.Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Digital Bp Apparatus Heavy Duty, With Adult, Large Adult And Pediatric Cuffs Running In Ac Power For Use In Opd And Ward With 3 Yr Warranty.Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Digital Weighing Scale For Patient Weight With 3 Yr Warranty.Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Syringe Infusion Pumps With 3 Yr Warranty.Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Multiparameter Monitors Ecg, Spo2, Nibp With 3Yr Warrranty And2 Sets Of Cables.Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Ot Light- Floor Mounted, Led Source , Brightness And Focus Adjustable With 3 Yr Warranty.Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Small Size Packing Material Compatible With Automated Sealing Machine For Eto Sterilization Of Consumables..Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Intermediate Size Packing Material Compatible With Automated Sealing Machine For Eto Sterilization Of Consumables..Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Large Size Packing Material Compatible With Automated Sealing Machine For Eto Sterilization Of Consumables..Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Battery Operated Pocket Sized Spo2 Probes.Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Compact Disk- Recordable ( Cd-R ) With Hard Shell Box.Item To Be Demonstrated To Departmental Selection Committee. , ( D ) Dvd- Recordable ( Dvd-R ) With Hard Shell Box.Item To Be Demonstrated To Departmental Selection Committee. , ( S ) Cd Sticker Labels With Department Of Cardiology , Jipmer Stickers, With Space For Printing Angio No And Cd No.Item To Be Demonstrated And Discussedto Departmental Selection Committee. , ( S ) Permanent Marker Pens- Thin Script- Black.Item To Be Demonstrated And Discussedto Departmental Selection Committee. , ( S ) White Board Markers Black And Blue.Item To Be Demonstrated And Discussedto Departmental Selection Committee. , ( S ) Batteries Compatible With Zoll M Series Defibrillators.Should Be Fda / Ce / Dcgi Approved , ( D ) Catridge For Hp 1020 Series.Should Be Fda / Ce / Dcgi Approved , ( S ) Disposable Paper Based Sterile Front Buttoned Black / Brown / Dark Blue Half Sleeve Shirt And Pyjama For Cath Lab Patient Dress.Should Be Fda / Ce / Dcgi Approved , ( S ) Rechargable Ni- Mh Batteries 1.2 To 1.5 V Aa  2500 Mah With 80 Batteries And One Fast Charger Which Can Charge 4 Batteries At A Time Should Be Supplied With Every 8 Batteries..Should Be Fda / Ce / Dcgi Approved , ( D ) Long Term External Loop Recorder With Capability To Record At Least One Ecg Lead For A Period Of At Least 7 Days. Recording Patch / Electrodes Should Be Water Resistant Allowing Patient To Bathe. Episodes Should Be Identified Automatically And It Should Also Be Possible To Record Patient Triggered Episodes. Transmission Should Be Wireless And Monitored In A 24X7 Staffed Monitoring Center. Quoted Cost Should Include Disposable Electrode Set, Recorder, Hand-Held Activator, Data Transmission And Reporting For The Period Of Recording..Should Be Fda / Ce / Dcgi Approved , ( S ) Disposable, Sterile Cover For Fluoroscopy System Image Intensifier. Should Fit Image Intensifier Of Different Sizes And Should Have Elastic Band For Easy Retention..Should Be Fda / Ce / Dcgi Approved & Item To Be Demonstrated To Departmental Selection Committee , ( S ) Washable And Autoclavable Cut Shoes ( Clogs ) Specially Designed For Wearing In Operation Rooms / Icus Wear Slippers At Least 12 Inch Foot Length. ( Roomy Fit ) .Should Have Non Collapsible Sole To Support The Arch Of Foot. The Brochure Mentioning The Details Of The Product Should Be Submitted .Mention Various Sizes Available. ( Spr ) .Item To Be Demonstrated To Departmental Selection Committee
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 56
Puducherry View Result →
44.
Health and Family Welfare #10095351 AOC
Repairs And Renovations At Dh, Anakapalli In Anakapalli District.-Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , etc., complete for Brick Masonry Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , ..etc., complete for Reinforced cement concrete Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , ..etc., complete for Flooring Dismantling doors , windows and clear storey windows, Ventilators etc., ( wood or steel ) shutters including Chowkhats , architraves,hold fasts and other attachments etc., and stacking them within 100m lead including labour charge etc., and ..complete for finished item of work For Not exceeding 3 sqm in area : Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, fly ash cement / lime solid blocks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504). Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work (SS 901,903 & 904). For First Floor Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work (SS 901,903 & 904). For Second Floor Supplying and fixing single side prelam solid panel PVC door frame (Choukhat): Providing and fixing factory made Pac single side Prelam door frame of the size 50x47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2 Nos. of 150mm long brackets of 15 x 15mm MS Square tube. The two vertical door profiles are to be reinforced with 19 x 19mm MS. square tube of 19 guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4 Nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-incharge including conveyance of all materials, labour charges for fixing, complete for finished item of work. Providing and fixing 30mm thick Brand factory made moulded PVC door shutter- wood free consisting of frame made out of MS. tubes 19 gauge thickness and size of 25mmX25mm for styles, top and bottom rails. MS. Frame shall hav e a coat of steel primers. The inner panel shall consist of 25mm thick high density EPS conforming to IS 4671-1984 bounded with 2mm thick termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised panel design in different plain and / or pre-lam colours after routing to the moulded design on one side and 2mm plain and / or pre-lam Pac sheet on other side of the EPS. The edge of panel to be sealed with lipping of 10mm wide PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent cement) and stiles sides 25mm(5mmX5) thick and 30mm width Pac sheet fitted along MS tube for lock provision for lock height 5mm thick Pac sheet of size 150mmX100mm fixed with upper and lower face of inner side of EPS panel etc., complete as per direction of Engineer – in-Charge, manufacture specification and drawing including supplying and fixing ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop bushes including labour charges for fixing the shutter to frame etc., including ..complete for finished item of work for door of size 800mm x 2100mm Providing SPECIALISED ACRYLIC CEMENTITIOUS ELASTOMERIC WATERPROOF COATING TREATMENT Complies with ASTM C 297 : Providing and Application of two coats of Acrylic cementitious elastomeric waterproof coating with- Roofcoat or equavalent like high elastomeric acrylic polymer modified cementiitious waterproof system. complete for finished item of work and as directed by the Engineer- in - charge including cost and conveyance of all materials , labour charges , etc., complete for finished item of work. SPECIALISED HIGH PERFORMANCE ACRYLIC POLYMER MODIFIED LASTOMERIC CEMENTITIOUS WATERPROOFING SYSTEM COATINGTO THE WET AREA / TOILET / BATH ROOM . a ) First Layer - Supply and Apply penetrative cum bonding primer as base primer cum sealer coat using equivalent modified with water and cement at the ratio 2:1:3 (MIXPRIME AC 100 : water : cement) by volume with a slow speed mixer machine. This compoundshall be applied with sufficient thickness to cover the holes/pores/cracks @ 1.000 Liter /SQM and the raw primer should be complain with ASTM 4541 and the Solidcontent 49% +2% b ) Second Layer – Supply and apply of 2 x2 mm welded with alkaline resistant coated / non-woven 40 Gsm verging fiber mesh or equivalent for a minimum over lap of 100 mm embedded inthe primer coat c ) Third Layer - Supply and apply of first coat of two component (Powder + Liquid) system of high performance acrylic polymermodified elastomeric cementitious waterproofing system or equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISAT 476 Part 6), DIN 1048 Part 5 1991, BSEN 12390-8 2000, ASTM D 412-92 d ) Fourth Layer –Supply and apply of second coat of two component (Powder + Liquid) system of high performance acrylicpolymer modified elastomeric cementitiouswaterproofing system equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISAT 476 Part 6), DIN 1048 Part 5 1991, BSEN 12390-8 2000, ASTM D 412-92. Note: -1) No dilution or modification recommended for item Nos.b,c,d and e .2) All materials should be procured as perthe consumption with respect of the work order.3) The application should be carried out byan approved agency.4) The contractor should provide 5 years material warrantee from the Manufacturer and 5 year warrantee from the applicator orcombined Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, fly ash cement / lime solid blocks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and ..complete for finished item of work.( APSS No.126) Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., complete for finished item of work. (APSS No.701 & 707) For First Floor Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and ..complete for finished item of work. (APSS No.701 & 707) For First Floor Providing skirting to internal walls to 10 cm height with Soluble salt porcelain vitrified tiles screen printed and polished of 8 to 10mm thick of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,complete for finished item of work.(APSS No.701 &707) Providing dadooing with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and ..complete for finished item of work. For First Floor Providing and fixing in true horizontal level 13 mm - Mineral Fiber Ceiling tile of 595 x 595 (Square edge Fissura fine model) using hot dipped Galvanized Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire including cost and conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making, ..etc., complete for finished item of work in all floor in all floors.For First Floor Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) Supply and fixing powder coated aluminium fully glazed swing door cum partition as per the approved drawing, Partition frame using aluminium sections of 63.5 mm x 38.10mm , 1.50 mm thick for frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 1.62 mm thick and bottom rail of 95.25mm x 44.45 mm , 1.70mm thick,powder coating of alluminium sections 25mm microns thick, 5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber beading , single shutters fitted with 4mm thick pinheaded glass in the top half and 12mm thick prelaminated particle board ( One side choice colour and other side balancing white lamnation ) in the bottom half fitted with suitable aluminium glazing clips and rubber beading,shutter mounted with Cast Iron Body Bottle Type Hydraulic Door Closer (IS: 3564) with double speed adjustment, with necessary accessories and screws etc. complete as approved by Engineer-in-Charge including supply and fixing ISI marked powder coated aluminium fixtures of 6 Nos.150mm lonh But hinges,2 No tower bolt 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc., including complete for finished item of work.and as approved by the Engineer) (3000mmx3000mm) Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Alumium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm) Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides fixing 1mm thick mat finish laminated sheet to full width and height of the flush shutter both sides including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including ..complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2600mm) Supply & Fixing of Lead Lined Stainless steel Clean room door frames and shutters made of Stainless steel grade of 304 hairline finish, frame with 1.60mm (16SWG) thick hairline finish Stainless steel grade of 304 formed to Single/double rebate profile of size 100 mm x 58mm/ 143 x 58 mm, door frames with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level, the shutter with 1.2 mm thick hairline finish Stainless steel grade of 304 formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level. The lead sheets extend the full width and height of the door. Lead thickness is to be equal to the shielding in the adjacent wall. Hardware can be provided with Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter etc., including etc., complete for finished item of work in all floors Prepration of the surface : For existing expansion joint treatment : Chipping of the exisiting treatments over the expansion joints concrete / brick masonry with pneumatic power chiseling equipment and until to ahcieve the hard mother concrete surface. Chipping and removing of existing bituminous mastic boad upto 25mm deep. Duly removing of debris, cleaning of the surface from dirt, dust and other foreign matters. complete for finished item of work and as directed by the Engineer- in - charge including cost and conveyance of all materials , labour charges , etc., complete for finished item of work Supplying and fixing of MS doors, grill to windows / in open court yards using MS angles, flat, square bars including cost and conveyance of all materials, cutting, bending, welding, all operational charges, labour charges, etc., complete for finished item of work. White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., complete for finished item of work in all floors. Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.,complete for finished item of work in all floors. For First Floor Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.,complete for finished item of work in all floors. Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish and complete in all floors (APSS No.1200, 1207 & 1211). For First Floor Construction of Granular sub-base by providing HBG material confirming to Grading - III of MORT & H Table 400-2 including cost and conveyance of all material to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix place method with Rotavator/ approved means, at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT& H specification 401 (4th revision) and as directed by the Engineer- in - charge including cost and conveyance of all materials , labour charges , etc., complete for finished item of work (Payment will be made based on levels for finished item of work Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork ( laying and fixing of 125 mictron thick polythene film including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including cost and conveyance of all materials , labour charges , etc., complete for finished item of work. Supplying and fixing of 4 (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , ..etc., complete for finished item of work. Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , ..for finished item of work Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with S trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, ..etc., complete for finished item of work for all floors. Supplying and fixing of stainless steel sink of size 508.00mm x 457.2mm x 203.20mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces , ..complete for finished item of work in all floors. Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc., complete including cost and conveyance of all materials, labour charges for fixing , ..for finished item of work in all floors Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , ..for finished item of work in all floors. Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , ..for finished item of work. Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (short body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , ..complete for finished item of work in all floors. Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty (long body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , ..complete for finished item of work in all floors. Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, ..complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) For 75mm dia Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, ..complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) For 110mm dia Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2 to 2) for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, ..complete for finished item of work at all floor levels. For 15.90mm OD pipe Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2 to 2) for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, ..complete for finished item of work at all floor levels. For 22.20mm OD pipe Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2 to 2) for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, ..complete for finished item of work at all floor levels. For 28.60mm OD pipe Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , ..complete for finished item of work. For 15mm Nominal bore Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , ..complete for finished item of work. For 20mm Nominal bore Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , ..complete for finished item of work. For 25mm Nominal bore Drilling of bore well by down the hole hammer drilling to a finished dia of 165mm in all formations suitable for down the hole hammer drilling such as medium rock formation to hard rock formation, all consolidated formation and drilling in over burden to a dia of not less than 200mm etc., and reaming the bore well to suit insertion of casing pipe with couplings, caps and any other relavant materials up to required depth as directed by the Department including transportation of drilling rig and supporting vehicles and including bore development (Flushing of bore well at an average pressure of 150 PSI), conducting yileld test, consumable charges, crew charges required in fixation of pipe assembly completely done to the satisfaction of the Department and including all labour charges, but excluding cost of casing pipe, couplings, cap etc., The entire work shall be done as per IS - 2800 Part I & II 1979 and amended from time to time Supply and fixing of 180mm dia 6 kgs/sqm PVC casing pipe including cost and conveyance of all materials and labour charges , ..complete for finished item of work Laying, jointing of PVC/HDPE pipes as per BIS No.7634 part-III/75 for PVC and BIS No.7634 part-II/75 for HDPE pipes including trench excavation and refilling.LAB-00606 -50mm OD pipe- 10.0 kg/ sqcm Manufacture, Supply, & Delivery of HDPE pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight Length) - 50mm OD pipe- 10.0 kg/ sqcm Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid Surface P.V.C. pipe (ISI marked) on wall with all required PVC Junction Boxes confirms to IS : 3419 and all accessories fixing on chromium plated metallic base saddles for run of mains including all labour charges etc., complete. including all labour charges etc., complete. Makes: Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/AKG/Beljin/Vasavi/DEC Supply and Fixing of of 16A/6A, 2 in one, modular type power socket outlet with 16A switch (ISI marked) modular type and 2 No of 6A modular type sockets with 6A modular type (ISI marked) switch control with front cover plate on existing modular switch box including all labour charges, giving all connections etc., complete with following configurations1) 16A Socket - 2 No2) 16A Switch - 2 No3) 6A socket - 2 No. 4) 6A switch - 2 No Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision(Series7)/Honeywell(Blenzepro) Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16A sockets.Makes: Finolex /RRkabel/Havells/Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ FortuneArrt/Anchor/Million/ APAR(Anushakthi) Supply & run of 5 of 10.0 Sqmm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in the existing conduict pipe for run of mains from Power panel board to TPN DBs with pin type lugs and connections etc., complete. [for PDBs] Makes: Finolex / RR kabel / Havells/Finecab/KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) Supply and fixing of TPN 4 way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+12 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCBs in sheet steel enclosure with 63A, 10 KA breaking capacity c curve 4 pole MCB as incomer and 12 No of 6 to 32A, single pole, 10 KA breaking capacity c curve MCBs as outgoings including making connections etc., complete on wall. (LIGHTING DB). Makes: Legrand (Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus) Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 2.5 mtr length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode with Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip with all accessories and labour charges complete as per IS specification 732/1982 (Part II). Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-IMakes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel - 3.5 core, 50 Sq.mm Labour charges for run of U.G cables upto 50 sq.mm on wall with necessary fixing arrangments such as saddles, clamps etc., as directed by department including cost and conveyance of all materials etc., complete. Supply and Fixing of single phase DB in sheet steel enclosure as per IS 8623; IS 13032; IEC 61439-3 with metalic plug and socket with 1 No. 20/32A,10KA c curve SPMCB control including labour charges and giving connections etc., complete concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager-Novello+/Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ L&T-AU . Supply, transportation and fixing of 36W Recessed/Surface mounting 2 x 2 (600x 600 mm) LED luminaire made of CRCA sheet housing with powder coated with acrylic diffuser, Constant current Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , With System lumen output ≥ 3200lm operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs having efficacy of > 120 lumens / watt, CCT: 3000K - 5700K, minimum CRI>70 etc., complete including fixing in the ceiling with recessed/surface mounting, cost of all accessories and giving connections etc., complete with 5 years warranty.a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/LG Removing of existing Split Air Conditioners without damaging to copper pipe. Supply, Fabrication of 1set MS bracket suitable for fixing outdoor unit of 3.5 /4.50 TR Cassette AC unit. Supply, Transportation, Installation, Testing and Commissioning of the following Inverter model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation. 1.8/1.9 TR 5 Star capable of delivering 24000 BTU/hr and above with operating on refrigerant R-410A / R-32. Makes: Blue star / Hitachi / Daikin/Lloyd (prevailing models in the market) Supply and Transportation and fixing of 16 (400mm) Wall mounted Fan. Makes: Crompton Wind Flo / Bajaj Elite / Havells Swing / Orient Wall 50 Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200V to 250V rated for 5 KVA maximum load and time delay model with 16A, 3-way connector/ socket for output and with 3 core flexible chord and 3 pin 6/16A plug top for input suitable for Air-conditioner for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete. Makes: V-Guard / Real Guard / Uni Stab / ITL. Supply and Transportation of 5.00HP 25Stage,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply, etc complete for 4 Bore well. Makes: As per list of recommended brands as category I Supply and fixing of VTPN DB, 8 way vertical type MCCB distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, suitable to accommodate MCCB as incomer and single/three pole MCBs as outgoings with 125A, 4 Pole MCCB adjustable, confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release as incomer with 6 No of 40/63A, 10 KA TP MCBs c curve and 6 No, 6-32A, 10 kA SP MCBs c curve as outgoing including making connections and labour charges etc., complete on wall. Makes: Legrand(Ekinox 3) / Schneider-A9/Hager -Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (Formerly L&T)-Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus) Supply and transportation of following 4 core, 16 Sq.mm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I Makes: Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt Supply and run of 5 of 6 Sq mm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for circuits including labour charges etc. complete as required for run of mains [for LDBs] Makes: Finolex /RR kabel / Havells/ KEI/Polycab. Supply and Installation of 63A FP, MCCB, 25KA on wall with suitable sheet steel enclosure with cable end boxes including all labour charges etc complete with connections. Makes: Lauritz Knudsen (Formerly L&T)- D shine / Schneider-CVS/Legrand –(DP X3/DRX)/ Siemens 3VL / Hager-h3/C&S -Winbreak/HPL-Techno Supply and Fixing of 6-32A, 10 KA breaking capacity c curve four pole MCB in sheet steel FP enclosure with IP 20 Protection etc., complete as per IS 8623; IS 13032; IEC 61439-3 including making connections etc., complete on wall. [for UPS Input/Output control etc.,] Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx / Lauritz Knudsen (Formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno Plus) Providing independent earthing for Important equipment with 40mm dia B class 2.5m long G.I pipe and 19mm dia B class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) Supply and Run of No. 8 SWG G.I wire including cost of all accessories and labour charges etc., complete.
Contract Date: Ref. Documents Contract Value : ₹ 27.07 Lakh
Government Departments No of Bidders 1
Andhra Pradesh View Result →
45.
Housing Urban and Rular Development #10040497 AOC
Construction Of Transit House At Angul- 1 Civil Work :- Clearing and grubbingland including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works Latest Revision & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. 2 Earth workexcavation in foundation trenches in all kind of soil including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site within 50mtr initial lead and 1.5mtr initial lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge. 3 Up to 1.5Mtr Depth 4 Beyond 1.5Mtr to 3.00Mtr Depth 5 Disposal ofsurplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as perthe direction of the Engineer-in-charge. 6 Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance,loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. 7 Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge. 8 Supplying filling in foundation and plinth with sand in layers not exceeding 150mm thick including watering, ramming including cost, conveyance, royalty and taxes of all materials, all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only). 9 Cement concrete of propertion (1:4:8) in foundation and floors using 40mm nominal size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete as per direction of the Engineer-in-charge. 10 Cement concrete of propertion (1:2:4) in foundation and floors using 12mm nominal size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete as per direction of the Engineer-in-charge. 11 Cement concrete of propertion (1:3:6) in foundation and floors using 40mm nominal size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete as per direction of the Engineer-in-charge. 12 RCC work of M-25 in all floors having a minimum compressive strength ( in work test) 250kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providinggrooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills.(In all Floors) 13 A) Column base & footing 14 B) Plinth beam 15 C) Column & Roof Beam 16 Ground Floor 17 1st Floor 18 2nd Floor 19 3rd Floor 20 D) Lintel Band 21 i) Ground Floor 22 1st Floor 23 2nd Floor 24 3rd Floor 25 F) Roof slab 26 i) Ground Floor 27 1st Floor 28 2nd Floor 29 3rd Floor 30 G) Stair case 31 i) Ground Floor 32 1st Floor 33 2nd Floor 34 G) Chajja 35 i) Ground Floor 36 1st Floor 37 2nd Floor 38 RCC work of M-20 in all floors having a minimum compressive strength ( in work test) 200kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providinggrooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills.(In all Floors) 39 A) Column base & footing 40 B) Plinth beam 41 C) Column & Roof Beam 42 D) RCC Wall 43 Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr.Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel(Primary Producer like- SAIL/RINL/TATA/ JINDALSTEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spacer bar, chair, stage, hanger andbinding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987 in all floors.Ground Floor 44 Ground Floor 45 1st Floor 46 2nd Floor 47 3rd Floor 48 Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in Foundation & Plinth including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work. 49 Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in superstructure including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors. 50 i) Ground Floor 51 1st Floor 52 2nd Floor 53 3rd Floor 54 Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:4) after immersing the bricks for six hours in water before use in superstructure including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors. 55 i) Ground Floor 56 1st Floor 57 Providing 12mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. 58 i) Ground Floor 59 1st Floor 60 2nd Floor 61 3rd Floor 62 Providing 12mm thick cement plaster in cement mortar (1:4)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. 63 Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. 64 i) Ground Floor 65 1st Floor 66 2nd Floor 67 3rd Floor 68 Providing 6mm thick cement plaster in cement mortar (1:4)finished smooth to RCC work after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.Ground Floor 69 i) Ground Floor 70 1st Floor 71 2nd Floor 72 3rd Floor 73 Providing 25 mm thick Grading Concrete (1:2:2) using10mm to 6mm size chips finished smooth on roof slab etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.(Ground floors) 74 3rd Floor 75 Providing & installing two component acrylic modified cementitious waterproofing coating with masterseal 551/ Equivalent over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 kg/sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect as per direction of the Engineer -in-charge. 76 Supplying, fitting, fixing of Vitrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Colour/printed series of approved make in floors on 20mm thick bed of cement mortar (1:4) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess T&P erc. required for the work complete in all respect as per direction of the Engineer-in-charge. 77 i) Ground Floor 78 1st Floor 79 2nd Floor 80 Supplying, fitting, fixing of Vitrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Colour/printed series of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm cement plaster (1:3)jointed with white neat cement slurry mixed with pigment to match the shades of the tile including rubbing and polishing etc.complete with cost, conveyance, royalities and taxes of all materials labour, labour cess complete in all respect. 81 i) Ground Floor 82 1st Floor 83 2nd Floor 84 Supplying, fitting, fixing of 20 mm thick Granite Tilesin floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. 85 i) Ground Floor 86 1st Floor 87 2nd Floor 88 Supplying, fitting, fixing of 10 mm thick Granite Tilesin floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. 89 i) Ground Floor 90 1st Floor 91 2nd Floor 92 Supplying, fitting & fixing of 35mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality with frame of 1st class hard wood including cost of all door fittings and fixtures,conveyance of all materials labour and T&P require for the work etc.compolete as directed by Engineer-in-charge. 93 Supplying fitting and fixing of two track UPVC sliding window / ventilator of approved make with 6mm thick glass of approved quality complete with frame, shutter and all fitting and fixtures etc. complete as per specification & direction of Engineer-in-charge. 94 Supplying fixing and fittings MS window grills, Doors, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only) 95 Grill 96 Providing, Fitting & Fixing of Stainless steel of 304 grade in hand Railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost,conveyance of all Materials, Labour ,T&P required for fabrication, buffing & polishing, cost of all fixtures etc. complete and as per specification & direction of Engineer-in-charge (In all floors) 97 Painting two coats with synthetic enamel paints over a coat of primer including cleaning the surface with sand papering and using paints of approvedquality and approved shade including cost conveyance taxes of all materials all labourT&P etc. complete as directed by the Engineer in charge. 98 i) Ground Floor 99 1st Floor 100 2nd Floor 101 Painting 2 coats with Plastic Emulsion paints over a coat of primer and putty of approved shade by means of brush to inside surface of walls after cleaning the surface etc. complete in all floors including cost of all materials with all taxes and cost of all labour with T&P required for the work etc. complete in all respect as directed by Engineer – in – Charge. 102 i) Ground Floor 103 1st Floor 104 2nd Floor 105 3rd Floor 106 Painting two coats with weather coat paintof approved shade over a coat of primer by means of brush to outside surface of walls complete in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge. 107 i) Ground Floor 108 1st Floor 109 2nd Floor 110 3rd Floor 111 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size well rammed ,with side rcc wall and consolidated and grouted with fine sand including finishing the top smooth including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. 112 Providing and fixing Glass Reinforced Concrete (G.R.C) Jallis in approved size, pattern, design, shade and thickness of 50mm on frame and design element in 30mm thick casted with layering technique Power Spray methodology have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens casting shall take place with layering methodology using- Direct Power Spray machines. The screens shall be casted from ‘53 grade’ White Portland Cement fine graded, sieved Quartz & Silica Sand, reinforced with Alkali Resistant Glass Fiber manufactured between 4-5%having Zirconia content at least 16%, Super Plasticizersand U.V resistant Synthetic inorganic pigments should be used. 113 The material casting should take place in FRP Molds. The GRC Panels flexural strength average L.O.P should be above or equivalent to 6 N/mm2 & M.O.P should be above or equivalent to 15 N/mm2 for tests done on 28 days cured samples. The fixing of panels should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners & Self Tapping screws or as per approved shop drawings approved by site engineer in charge. 114 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). 115 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: 116 Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: 117 Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of buildingstructure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. 118 Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass 119 Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight 120 Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checkedby a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. 121 The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places. 122 Loosening to a depth of 150mm,levelling and compacting original ground supporting embankment/ sub-grade as per approved drawing andtechnical specifications complete in all respect as per Section 900 and Clause 305 of MoRT&H Specifications for Road and Bridge works (latest Revision) & including cost of all labour, T&P, royalty etc. complete and including cost of all labour, T&P,etc. complete and as per direction ofEngineer-in-charge. 123 Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide Clause No. 801.3 of specifications for road and bridge works of Ministry of Road Transport & Highways (Latest Revision) fixed over aluminium sheeting, 1.5mm thick with area exceeding 0.9 Sqm supported on a mild steel angle iron post 75mm x 75mm x 6mm , firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing& including cost of all materials, labour, T&P, royalty etc completein all respect and as per direction of the Engineer-in-charge. 124 Providing wet mix macadum using crushed stone aggregates as per approved drawing and technical specification complete in all respect as per Section 900 and Clause 406 of MoRT&H Specifications for road & Bridge works(latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc. complete and as per direction ofEngineer-in-charge. 125 Supplying and fixing of 80mm thick cement concrete interlocking paver block of M -40 gradeof approved make design, colour & size made by Block machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018 as per the direction of Engineer-in-charge 126 Supplying and fixing of Kerb Stone of size 600X300X150mm of M -30 gradeof a pproved make design, colour & size made by Block machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS - 5758:1984as per the direction of Engineer-in-charge 127 Providing and fixing 12.5mm thk. Gypsumboard false ceiling consisting of G.I. perimeter channels of size 0.55 thick, screw fixed to brickwall/partition with the help of nylon sleeves and screws, at 610mm centres. The suspending G.l.intermediate channels of size 45mm, 0.9mm thick with two flanges of 15mm each from the soffite at 1220mm centres with ceiling angle of width 25mm x 10mm x 0.55 thick fixed to soffite with G.I. cleat and steel expansion fastners at every 610mm c/c.12.5mm tapered edge Gypsum board is then screw fixed to ceiling section with 25mm drywall screws The boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edge of the boards with jointing compound & joint paper tape as per approved design and specificatinetc.fitted and fixed in position etc. with cost, conveyance, taxes of all materials, labour, T&P required for complete in all respectas per the direction of Engineer -in-charge. 128 Supplying,fitting ,fixing of grid mineral fibreceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fiotting and fixtures in all respect as per the direction of the Engineer -in-charge. 129 Supplying and fixing of wall panelling made of aluminum anodised section framing confirming to standard aluminium section as horizontal and vertical members with atleast 600 mm c/c with 9mm thick BWR block ply and 4mm thick veneer pasting finished with melamine polished completein all respectas per the direction of Engineer -in-charge. 130 P.H WORKS :- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 131 20mm dia C- PVC pipe SDR - 11 132 Ground Floor 133 First Floor 134 Second Floor 135 25mm dia C- PVC pipe SDR - 11 136 Ground Floor 137 First Floor 138 Second Floor 139 32mm dia PVC ASTM pipe (sch-80) 140 40mm dia PVC ASTM pipe (sch-80) 141 Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. 142 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) 143 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) 144 15 mm dia CP S.B. Bib cock(CON-CHR-037KN) 145 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) 146 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) 147 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) 148 25mm dia brassfull way valve (Shakti make) 149 32mm dia brassfull way valve (Shakti make) 150 40mm dia brassfull way valve (Shakti make) 151 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) 152 gyser ELM-WHT-V006 153 WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR) 154 Hand Dryer SMART FLOW (As per Cat no HDR-WHT-M04A of Jaquar) 155 15mm CP Extension piece 156 125mm CP grating 157 15mm size C.P. flange 158 25mm size brass ball cock with ball 159 Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge 160 2000 liters capacityPVC water storage tank roof of 2nd floor 161 supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. 162 Ground Floor 163 First Floor 164 Second Floor 165 Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge 166 Ground Floor 167 First Floor 168 Second Floor 169 Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. 170 Ground Floor 171 First Floor 172 Second Floor 173 Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 174 110mm U-PVC SWR Pipe (Supreme /Ashirvad) 175 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) 176 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) 177 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) 178 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) 179 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) 180 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) 181 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) 182 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) 183 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) 184 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) 185 Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI p or s trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 186 580mm size Orissa pan (Hindware/Parryware/Neycer make) 187 Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 188 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) 189 Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 190 One piece commod(Hindware)ELEMENT Cat No.92084. 191 Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 192 Halfpedestalbasin(560x450)Hindware No.91049+91115 193 Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink 194 Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 195 25mmx600mm long CP towel rail 196 Towel ring 197 Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 198 600mmx125mm plate glass shelf with CP/NP guard rails. 199 Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 200 600mmx450mm size B.E mirror (swivelled type) 201 Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 202 CP soap holder 203 Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. 204 ½” x 5” CP Shower (Plaza Deluxe Make) 205 Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge 206 Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge 207 Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge 208 Inside size 76cmx76cmx46cm with 18” dia RCC MH cover 209 Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge 210 Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. 211 Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 212 Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 213 Ground Floor 214 First Floor 215 Second Floor 216 Supplying all materials, labour, T&P and providing and fixing Vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( Vitrifiedfloor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed seriesto be pre-approved by the Engineer-in-charge ) 217 Kajaria/Somany/Johnson tile 60cmx60cm 218 Ground Floor 219 First Floor 220 Second Floor 221 Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. 222 Ground Floor 223 First Floor 224 Second Floor 225 Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( Vitrified mat finish wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) 226 Kajaria/Somany/Johnson tile 60cmx30cm 227 Ground Floor 228 First Floor 229 Second Floor 230 Granite Tiles 10mm thick 231 Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centres standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 232 Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge 233 Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liters along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge 234 Aqua guard pure Chill 80 PSS UV 235 Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufactures specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 236 100mm dia P.V.C. pipe 237 150mm dia P.V.C. pipe 238 Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. 239 MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) 240 Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. 241 1 no 50 users RCC septic tank 242 Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge. 243 Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. 244 Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge. 245 Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer incharge. 246 Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 247 Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 248 Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 249 Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 250 R.C.C beams,columns,girder and bressmer etc. 251 Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 252 Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 253 Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 254 Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 255 Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 256 Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. 257 Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge 258 Construction of 20000 Liters RCC Under ground Reserverof Inside size- 4.00 X 3.00 X2.00m 259 Earth work in All kinds of soil and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department. 260 -do- with Ist additional depth of 1.50 m over the initial lead and lift 261 Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer incharge. 262 Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 263 Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete. 264 Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. 265 Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. 266 RCC floor roof, chajja etc 267 RCC Beam, Column, wall etc 268 RCC Plinth bend/ Raft 269 Base slab 270 Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) overCC workincluding watering curring and conveyance of all materialsto site. 271 Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. 272 Quantity same as item No-4 273 Providing fitting and fixing CI/MS step iron including fixing to walletc. complete 274 Providing fitting and fixing RCPCcoveretc complete as per direction of Engineer-in-charge 275 Construction of 1 no production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories 276 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only 277 Drilling of 200mm dia bore 278 00 mtr to 30mtr 279 30 mtr to 45mtr 280 Drilling of 150mm dia bore 281 45 mtr to 215.00mtr 282 Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 283 Lowering of 200mm dia P.V.C casing pipes 284 00 mtr to 30 mtrs 285 30 mtr to 60mtr 286 Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber O ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 287 200mm dia PVC (sch-80) pipe 288 Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) 289 Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge 290 By DTH Rig 291 Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: 292 Rocky terrain with boulder formation for 300m depth 293 Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 294 1 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) 295 DOL Control panel 296 40mm dia steel short piece 297 Well cap 298 50mm size CI bracket 299 2.50sqmm flat cable 300 20mm dia rigid UPVC pipes 301 Steel rope with cover 302 Labour charges for lowering including transportation 303 Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge 304 32mm HDPE pipes (Finolex/Supreme make) 305 E.I Works :- Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular GI box with modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels /HPL/ V Guard ) Group-ALP-54 306 Group-B LP-77 FP-27 307 Group-CLP-132,FP-28Ex FP-19CBP-8 308 Supply and fixing of 6Amp plugwith 6Amp switch on existing board. (Modulartype)(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) 309 Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copperconductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with Modular type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. 310 Supplying and fixing of 3 nos 6 Amp Plug point 3 nos switch, 1 No 15 Amp Switch & 1 No 15 Amp Socket Modular type on modular metal box, base & cover with all connections.(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) 311 Supplying and fixing of 15/16 Amp Plug point Modular type on modular metal box on surface/Recess with suitable size of Modularcover in front including cutting the wall and making good the same in cases of recessed conduit as required(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) 312 s/f of ac point consisting of 32Astarter with all connection compelete s per the direction of engineer in charge 313 Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia 314 2 X 2.5 sq.mm +1 X 1.5 sq.mm-do- 315 2 X 4 sq.mm +1 X 1.5 sq.mm -do- 316 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia 317 4 x 6 sq.mm + 2 x 2.5 sq.mm) 318 4 x 10 sq.mm + 2 x 4 sq.mm) 319 Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc ( with charcoal and salt) as required. 320 Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required 321 Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.)4 way (4+12) double door horizontal type 322 Supply and fixing of 5Amp to 32A rating 240 V/415 V c series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S)Single pole (SP) 323 S/F of 34/36 Watt (2 x 2)LED round/ square surface ceiling Lights .(Make-Havells/Crompton/Philips/Bajaj)) 324 Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required. 325 S/F. Of 400mm Wall fans including all connections and accessories of Usha/Orient/Havells/Equivalent make 326 s/f SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories withdiffuser having 2 years warrantyi/c connection etc as requiredas per direction of Engg.-in-Charge.(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .of tube light18watt /20 watt ledfitting with cover( Make-Havells/ Philips/Cromptonas per the direction of side engineer in charge. 327 S/F. Of 48AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make. 328 Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers(Make- Havells/Crompton/Usha/Orient/Bajaj) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. 329 S/F. of 45Wt. LED Street light fittings complete with G.I. bracket. Of Bajaj/Havells/Crompton/Philips make. 330 S/F of 18Watt Recess/Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver.(Make-Havells/Crompton/Philips/Bajaj)) 331 s/f of decorative foot light (Make-Havells/Philips/Crompton or equivalent.) 332 Supply of 35 sq mm 3-1/2 core XLPE insulated Aluminium Armoured cables ISI marked 333 Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kvgrade sizeexceeding 25 SQ. MMbut not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. 334 S/F of 30x6x10no 16/18 SWG sheet metal for main 250 amp panel board having125 amp MCCB 25 KA-1no as incommer,200 amp electrolyte cu bus bar-1no andammeter and voltmetertoggler switch,three nos led indicator and as per the direction of site engineer in charge.(make: Siemens / legrand/Schneider/Equivalent)) 335 Approved for 97 ( One hundred eight) items only
Contract Date: Apr 22, 2026 Contract Value : ₹ 2.67 Crore
Government Departments No of Bidders 3
Odisha View Result →
46.
Rural Development #10020165 AOC
Bids Are invited for Note books A4 size 160 pages Minimum Quantity - A4 size 160 pages good quality paper with 56 gsm to 60 gsm paper , Gel or Ink Pen Minimum Quantity - Blue ink smooth writing , Pencil Minimum Quantity - HB pencil good quality wood and branded , Geometry Box - Standard metal geometry box with compass set , Atlas - School atlas latest edition , Map for practice - India or world or rajasthan outline map for practice , Eraser - Non dust soft eraser , Graph notebook - A4 graph notebook , Drawing Book - A4 drawing book 36 pages , Water colour or colour pencil or crayon - 12 colour set , Practical Notebook - A4 practical record notebook , Activity Book - Student activity workbook , Scale - Plastic scale 30 cm , Identity Card - Laminated school ID card take photo from school and printed lace , School Dairy - Student diary with school rules pages , OFFICE ORDER BOOK - good quality paper , VISITER REGISTER - good quality paper with 70 gsm paper or above printed , STAF MOVEMENT REGISTER 200 PAGES - good quality paper , CASH BOOK CANVAS BOUND REGISTER 300 DOUBLE SIDED PAGES - good quality paper , LEDGER ACCOUNT SPACIOUS CANVAS BOUND 300 DOUBLE SIDED PAGES - good quality paper , STOCK REGISTER NON- CONSUMABLE 200 PAGES - good quality paper , STOCK REGISTER CONSUMABLE 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , DAILY CONSUMPTION REGISTER OF MESS A3 SIZE CANVAS BINDING 373 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , LTC CLAIM REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , ASSESTS REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , DISTRIBUTION REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , MESS VISITOR REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , MEDICAL BILL WITH FORM A 100 PIECE - good quality paper with 70 gsm paper or above printed in EMRS Format , M AND R COMPLIN REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , CASUAL LEAVE REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , CHILDREN EDUCATION ALLOWANCE REGISTER 100 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , FURNITURE DISTRIBUTION REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , CHARACTER CERTIFICATE LEDGER OR WHITE 100 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , BILL ENTRY REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , PAY BILL REGISTER 300 PAGES A3 SIZE - good quality paper with 70 gsm paper or above printed in EMRS Format , RULLED REGISTER 120 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , CLASS ATTENDANCE REGISTER 26 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , ADVANCE ADJUSTMENT REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , GATE PASS SLIP PAD PRINTED NAME OF EMRS 100 PC IN PAD - good quality paper with 70 gsm paper or above printed in EMRS Format , HOSTEL OUTING OR INCOMING STUDENT MOVEMENT REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , EXAM - DUTY CHART REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , HOUSE ATTENDANCE REGISTER 48 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , MESS ATTENDANCE REGISTER 300 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , STUDENTS DIARY 156 PGES A5 SIZE - good quality paper with 70 gsm paper or above printed in EMRS Format , MONITOR DIARY 240 PAGES A5 SIZE - good quality paper with 70 gsm paper or above printed in EMRS Format , PT ATTENDANCE REGISTER 300 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , MORNING PRAYER ATTENDANCE REGISTER 300 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , HOUSE MEETING REGISTER 48 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , HOSTEL NIGHT ROLL CALL REGISTER 300 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , TEACHERS DAIRY AS PER EMRS NORMS 200 PAGES A4 SIZE - good quality paper with 70 gsm paper or above printed in EMRS Format , PERIOD WISE DAILY TEACHER DIARY 300 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , ARRANGMENT DUTY REGISTER 300 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , REMEDIAL STUDY REGISTER 300 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , SUPERVISE STUDY REGISTER 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , REGISTER OF STUDENT NON CONSUMABLE ITEMS BEDDING 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , REGISTER OF STUDENT NON CONSUMABLE ITEMS DAILY USE 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , REGISTER OF STUDENT NON CONSUMABLE ITEMS UTELSILS 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , REGISTER OF STUDENT NON CONSUMABLE ITEMS SCHOOL UNIFORM 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , REGISTER OF STUDENT NON CONSUMABLE ITEMS STATIONARY 200 PAGES - good quality paper with 70 gsm paper or above printed in EMRS Format , STUDENT HEALTH CARD - good quality , GIRLS MONTHLY RECORD REGISTER 200 PAGES - good quality , MEDICAL CONSUMBLE REGISTER 200 PAGES - good quality , MEDICAL GROUND LEAVE RECORD REGISTER 100 PAGES - good quality , HOSPITAL VISIT REGISTER 100 PAGES - good quality , CLEANING RECORD REGISTER 300 PAGES - good quality , DAILY MEDICINE TREATMENT RECORD CANVAS BOUND REGISTER 300 DOUBLE SIDED PAGES - good quality , STUDENT MEDICINE ISSUE REGISTER SPACIOUS CAVAS BOUND REGISTER 300 DOUBLE SIDED PAGES - good quality , DOCTOR VISIT RECORD REGISTER - good quality , FOOD TESTING REGISTER 300 PAGES - good quality , LIBRARY ISSUE CARD 280 GSM IVORY - good quality , LIBARARY BOOK ISSUE REGISTER FOR STUDENT 200 PAGES - good quality , STUDENT TEXT BOOK ISSUE REGISTER 200 PAGES - good quality , NEWS PAPER AND PERIODICALS REGISTER 200 PAGES - good quality , FILE TAG COTTON - GOOD QUALITY , FEVI GUM SQ 200 ML PER PCS - GOOD QUALITY , RUBBER BAND BIG SIZE 400GM PKT - GOOD QUALITY , SCISSORS 08 INCH SMOOTH CUTTING MULTI USE - KANGAROO OR SIMILAR , STEPLER SMALL - KANGAROO OR SIMILAR , STEPLERS BIG - KANGAROO OR SIMILAR , PACKING CLEAR TAPE 2 INCH 6PCS IN 1 ROLL - WONDER OR SIMILAR , PACKING CLEAR TAPE 1 INCH 12PCS IN 1 ROLL - WONDER OR SIMILAR , t PINS 50 GRAM IN PKT - GORILLA OR SIMILAR , GLOBE ZEBRA ALPIN T - GOOD QUALITY , HIGHLIGHTER 5 CLR IN SET - CAMLIN OR SIMILAR , NAME PLATE HOLDER - GOOD QUALITY , PAPER PUNCH TWO HOLE - KANGAROO OR SIMILAR , PAPER PUNCH ONE HOLE - KANGAROO OR SIMILAR , PAPER TAG STICKER 6CLR IN A PCKT - GOOD QUALITY , TAPE DISPENCER HALF AND 1 INCH - PRIMIER OR SIMILAR , TAPE DISPENCER 2 AND 3 INCH - PRIMIER OR SIMILAR , Exam Copy 4 Page - Exam answer sheet 4 page good quality paper with 56 gsm to 60 gsm paper , Exam Copy 8 Page - Exam answer sheet 8 page good quality paper with 56 gsm to 60 gsm paper , Exam Copy 12 Page - Exam answer sheet 12 page good quality paper with 56 gsm to 60 gsm paper , Exam Copy 16 Page - Exam answer sheet 16 page good quality paper with 56 gsm to 60 gsm paper , ANSER SHEET SUPLEMENT - Exam answer sheet 4 page good quality paper with 56 gsm to 60 gsm paper , PRACTICAL EXAM COPY - good quality paper with 70 gsm paper or above printed in EMRS Format , STUDENT HOME VISIT REGISTER AS PER EMRS 50 PAGES , STUDENT ACADMIC RECORD REGISTER BY HOUSE MASTER 50 PAGES , HOUSE WISE STUDENT COUNSLING REGISTER 100 PAGES , STUDENTS PROFILE REGISTER HOUSE WISE 50 PAGES - STUDENTS PROFILE REGISTER HOUSE WISE 50 PAGES , HOSTEL OUT GOING OR INCOMING STUDENT MOVING REGISTER 50 PAGES - HOSTEL OUT GOING/INCOMING STUDENT MOVING REGISTER 50 PAGES , TRANSPARENT FILE FOLDER A4 SIZE , CLASS ABSENTEE DAIRY 300 PAGES , WHITE BOARD MARKER BOLD WRITING REFILLABLE CAMLIN 10 PIC IN PKT - WHITE BOARD MARKER BOLD WRITING REFILLABLE CAMLIN 10 PIC IN PKT , REFILABLE INK CAMLIN 50ML BOTEL , RIM A4 SIZE - RIM A4 SIZE 70 GSM JK , GLOSSY PAPER A4 50 PAPER IN 1 PKT - GLOSSY PAPER A4 50 PAPER IN 1 PKT , ALL COLOUR A4 SIZE RIM , CHART PAPER ALL COLOUR , 12 INCH Stretch Wrapping Film ROLL , CLASS ROOM OBSERVATION TOOL DAIRY AS PER EMRS Total Quantity : 71105
Contract Date: Ref. Documents Contract Value : ₹ 9.14 Lakh
Government Departments No of Bidders 7
Rajasthan View Result →
47.
Power #9901831 Technical Bid
Tender For Augmentation Of Engineering Hall Of Filter Testing Facility,Rsms, Barc, Trombay, Mumbai.; 1 Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge. 2 Dismantling of Rolling shutter including disposal of unserviceable surplus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge 3 Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below 4 Dismantling cement asbestos, Celotax or other hard board ceiling or partiton walls including stacking of serviceable materials and disposal of unserviceable materilas within 100 m lead 5 Providing and fixing VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 inall colours and shades in Glossy or Matt or satin finishlaid over a bed of minimum20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints withwhite cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge 6 Using Tiles of size 600 X 600 mm 7 Providing and fixing LUXALON Lay in False Ceiling 600 x 600mm unperforated corrosion resistant aluminium magnesium alloy metal panel fixed in 24 mm T Frame work of Module 600 x 600 mm. Panels shall be manufactured by Hunders Douglas of size 575 mm x 575 mm of approved colour in 0.70 mm thick Aluminium Alloy 3105 with square edges Tiles to be stove enamelled on a continuous application for pre-treatment. The coils to be go through 4 stages of pre treatment Three times of oven baked through conversion coating , priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability.The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and a topcoat of approved colour 15 microns. Grid system for fixing ceiling tiles shall comprise of tees. The 24 mm main tee runers shall be suspended at an interval of 1200 mm centre to centre. The 24 mm cross tee runner shall be suspended at an interval of 600 mm centre to centre and further supported with 24 mm cross tee with inter locking arrangements to form a Grid of 600 mm x 600 mm. The main tee shall be supported by means of 4 mm G.I.rod from slab / roof. The suspension shall be provided at 1200 to 1500 mm centre to centre.provision for lights, diffusers etc to be made including extra supports wherever necessary. Measurements shall be as per actual area of false ceiling with out deductions for lights and diffusers. 8 Providing and laying 50 mm thick cement concrete flooring with concrete hardner topping under layer 38 mm thick cement concrete 1:2:4 and top layer 12 mm thick wearing surface with metallic floor hardner, cement being mixed with metallic floor hardner of approved quality and make in the ratio of 4:1 (4 cement and 1 metallic floor hardner) by weight and this cement hardner compound mixed with 6 mm down graded stone aggregate in the ratio of 1:2 by volume including providing and fixing 25 X 3 mm aluminium strip,This includes cost of cement slurry, finishing to the required finishing and cleaning neatly while handing over the areas etc. complete as per specifications and drawings. 9 Supplying and fixing Rolling shutters of approved make as per ISI standards made out of required size of MS lathes 18 gaugeinterlocked together throughout entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets, side guides and arrangements for inside & outside locking with push and pull operation complete including the cost of providing and fixing necessary springs of required size and M. S top cover of required thickness for rolling shutters 10 Rolling shutters gear operated type with handles including top hood 0.90 mm thick 11 Extra over the cost of rolling shutters for providing and fixing motorized arrangements( with remote & manual operation) including designing, control panels, limit switches,required wiring and cables from panel to motor and required size of shaft etc of approved make all as per standard specifications including commisioning and testing complete as directed by the Engineer-incharge.(only power supply point will be provided) 12 For rolling shutters up to 15.00 sq.m opening area. 13 Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws. 14 35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws. 15 Providing and fixing approved make 7 Lever Night latch including necessary screws etc in wooden doors complete all as directed at site . 16 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge. 17 Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete. 18 Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels 19 Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead 20 Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. 21 Debris up to 1 km 22 Providing and fixing white vitreous china European type Water Closet with P or S Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge. 23 E.W.C. pan in White colour with ISI marked white solid plastic seat and lid. 24 Providing, laying to the slope specified and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the order of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete excluding excavation and refilling which will be paid under relevent Item. 25 100 mm diameter stoneware pipe 26 Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge. 27 White vitreous China wash basin size 630 x 450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap. 28 Providing, laying , jointing, fixing and testing heavy quality ( (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked C -Class heavy quality pipes of approved make. 29 15 mm dia G.I pipe 30 20 mm dia G.I pipe 31 32 mm dia G.I pipe 32 Providing and fixing heavy quality ISI marked G.I. union in G.I pipe lines including threading the pipes and long threads suitable for union complete all as per specifications and as directed by the Engineer-in-charge. 33 15 mm n/b G.I union 34 20 mm n/b G.I union 35 32 mm n/b G.I union 36 Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge. 37 Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design. 38 150 x 100 mm size gully trap P type 39 Providing, supplying and fixing JET spray with 1.00 metre long flexible tube connection in European / Anglo Indian closet under seat cover fixtures complete all as specified and as directed by the Engineer-in-charge 40 Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge 41 Providing and fixing heavy quality stainless steel / C.P brass grating of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge 42 SS grating 150 mm square with frame 43 Making connection of distribution branch with G.I main of 25 to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge 44 Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge. 45 15 mm dia bib cock of approved type and make. 46 Providing and fixing C.P brass Angle cock of heavy quality ofspecified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge. 47 15 mm n.b CP brass Angle cock of approved make 48 Providing and fixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge. 49 Providing and fixing C.P brass concealed stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge 50 15 mm n.b CP brass concealed stop cock of approved make 51 Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mmdia 600 mm long 52 Providing and repairing to internal plaster in cement mortar 1:4 (using crushed sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50 metres lead 53 Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer) 5) If thickness of repair exceeds 20mm , after every 20 mm thickrepair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) 54 Providing and fixing double tubular scaffolding system using Hframes with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding. 55 Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces,scaffolding complete. as per specifications and as directed by the Engineer-in-charge. 56 Providing, applying one coat of primer with ready mixed red oxide primer of approved brand and manufacturer on steel works including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge. 57 Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge. 58 Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels. 59 Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) 60 Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) 61 Extra for colour anodizing 62 Providing and fixing 12 mm thick pre-laminated particle board flat pressed 3 layer or graded wood particle board conforming to IS12823 Grade-I, Type - II in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P Brass / Stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Prelaminated particle board with decorative lamination on both sides 63 Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) 64 With clear float glass panes of 6.00 mm thickness 65 Providing and fixing locks for aluminium sliding window shutters with GEETAVIN make as per cat. No. SS-004 (Over all size of 204mm x 23 mm) or approved equivalent quality, make, type all as per specifications complete as directed by the Engineer-in-charge 66 Providing and constructing brick work in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge 67 Brickwork in super structure with standard bricks in C.M 1:4 using crushed Sand 68 Providing and constructing Half brick masonry using bricks ofapproved quality / class, brand/ make in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-in-charge 69 Providing and fixing in position of Aluminum deco grills with6 mm thk grid, fixing to MS box framewith proper ararngment , at elevation, as directed by the Engineer in charge. Pattern, section of grill will be approved by Engineer in charge. 70 Providing , fabrication, fixing cabinets made of powder coated CRCA sheets. Typical size of the cabinets will be height 6.5 ft x length/Width 3 ft x depth 1.5 ft. Quantity of work will be based of square feet obtained from multyplying length/Width and heightof the cabinets. CRCA sheets of shall be minimum thickness of 18-20 gauge. Cabinet should have vertical two door and five shelf. Locks ofreputed make shall be provided to the cabinets. All the components of the cabinet should be powder coated. 71 Providing, fabrication and fixing cabinets made of powder coated CRCA sheets. Typical size of the cabinets will be height 5.5 ft x length/width 2.75 ft x depth 1 ft. Cabinets shall have five shelf of 1 ft height each with separate door. Quantity of work will be based of square feet obtained from multyplying length and width of the cabinets. CRCA sheets of shall be minimum thickness of 18-20 gauge. Cabinet should have horizontal shelf. Locks of reputed make shall be provided to the cabinets. All the components of the cabinet should be powder coated. 72 Providing, fabrication, Installation of customized Powder coated heavy duty MS Racks made of slotted angle and heavy gauge panels (minimum thickness of 18-20 gauge) for storage ofpapers, tools and tackles etc. 73 Providing and Installation of 1.0 ton split Air Conditioners, 5 star rating, Reputed make with copper tubes for inlet and outlet, mounting brackets and metal clad switch-socket mounted on powder coated MS Box. Make &modelshall be approved by Engr. In Charge. Ducting and tubing works to be carried out as per TSD guidelines. Total Length of copper tube is in the range of 15 meters. 74 Providing and Installation of 1.5 ton split Air Conditioners, 5 star rating, Reputed make with copper tubes for inlet and outlet, mounting brackets and metal clad switch-socket mounted on powder coated MS Box. Make &modelshall be approved by Engr. In Charge. Ducting and tubing works to be carried out as per TSD guidelines. Total Length of copper tube is in the range of 15 meters. 75 Providing and installation of AC tubing work which includes copper tube, 3 core, 2.5 cable, PVC pipe as approved by Engineer-in-charge 76 Shifting of existing installed outdoor unit of 1.0 ton split air condiioner , with dismantling and re installation withbracket ,supporting , anchoringetc. 77 Providing and fixing vertical blinds 100 mm Louver width, quality of approved fabric of 0.40 mm thickness having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, along with metal bottom weight and top rail for vertical blinds movement. 78 Shifting of existing water cooler from CDCFT site to RSMS work site,installation of water cooler with providing flexible pipe for inlet and drainage water as per instructions by EIC. 79 Dismantling, removal of existing PVC floor sheetfrom the floor area including disposal of generated debris and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge. 80 Providing, surface preparation and laying of 2 mm thick PVC carpet flooring at passages, rooms and other areas, with color and shade of the PVC carpet, be as per technical specification and approved by EIC. 81 Providing, inatallation of low back chairs for lab room, meeting table and computer work station, with revolving base, hydraulic lift arrangement, with heavy duty castor wheels, half back with soft cushion on base and back, with soft cushned hand rest in colours approved by EIC and as per technical specifications 82 MS support, structures and grill frame work : providing, handling, cleaning of structural sections like, channel, angle ,beams, plates, sheets etc., fabrication and erection offrame for aluminum grill, staging member,platform, ladder,etc.using anchor fasteners (wherever required), clamps, screws/nut & bolts and welding with SMAW, in case of MS support painting with two coat of primer and enamle paint, at all elevations along with all necessary equipment, consumables,completing work as per drawing, specifications and norms approved by the EIC. 83 Providing, fabrication and installation of work station made of good quality plywood, laminated with 1mm laminations from all side, with provision foraccomodating desktop computers, printer, sliding keyboard rack with top table size 0.6 mtx 0.2 mtr x 0.75 mtr height, as per technical specifications and approved by EIC. 84 Providing, fabrication and installation of wooden door of apprx sizes 1.5 ft Width x 2.5 ft Height, made of good quality plywood,with wooden framework, laminated with 1mm laminations from all side, for granite formed compartments,providing SS hinges, handels and locking arrangement, as per technical specifications and approved by EIC. 85 LED batten: Supply, installation, testing and commissioning of LED batten light fitting with a nominal system lumen output of minimum 4000 lumens and a minimum system efficacy of 120 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70B50. The luminaire should have cool white colour temperature and a CRI>80. The luminaire shall meet IP20 rating with THD<10%, Pf>0.95 & Surge protection is 3kV. The luminaire housing should be made of CRCA sheet with clip type mounting brackets. The total power consumption should not exceed 40 W (including driver) 86 6/16A Socket-Switch Box: Fabrication and installation of 120mm X 100mm X 75 mm. Socket Box. The box shall be fabricated out of minimum 16 SWG Thick MS CRCA sheet, powder coated after vigorous 7 Tank process. The dimensions of box given here is tentative and likely to vary as per dimensions of components being mounted.The scope includes providing modular 5 A / 15 A Universal, 250 V,3 pin socket with 15 A SP Switch with suitable modular plate and accessories. Necessary cut-out for mounting the components/modular plate shall be provided on the front fascia of the box. 87 Switch Box: Fabrication and installation of 100mm. X 100mm. X 75 mm. Switch Box. The box shall be fabricated out of minimum 16 SWGMS CRCA sheet, powder coated after vigorous 7 Tank process. The dimensions of box given here is tentative and likely to vary as per dimensions of components being mounted.The scope includes providing modular 16 A, 250 V, SP Switch with modular plate and accessories. Necessary cut-out for mounting the components/modular plate shall be provided on the front fascia of the box. 88 1 Phase MCB BOX: Supply, installation, testing and commissioning of415 V, 16 A, Single phase-neutral, MCB box. The box shall be of minimum 150mm X 250mmX 100mm.size fabricated out of MS CRCA sheet and powder coated . Necessary cut out on the front door forDP MCB, DIN rail, screws, DP MCB, internal wiringand other hardware shall be included in the scope. Cable entry cutouts on top/bottom have to be made at site based on site requirement. 89 3 Phase MCB BOX: Supply, installation, testing and commissioning of415 V, 16 A, 3 phase-neutral, MCB box. The box shall be of minimum 200mm X 300mmX 100mm.size fabricated out of MS CRCA sheet and powder coated . Necessary cut out on the front door forMCB, DIN rail, screws, TPN MCBand all other hardware, internal wiring etc. shall be included in the scope. Cable entry cutouts on top/bottom have to be made at site based on site requirement. 90 Cable: Providing and laying of 4 Core x 2.5 Sq.mm. stranded copper conductor, LT, 1.1 kV grade, XLPE insulated, extruded PVC sheathed, FRLS outer sheathed armoured cable. Cables to be laid on wall, trays, ceiling as directed at site. 91 Cable Termination: Termination of 4C X 2.5 Sq. mm copper cables using crimping type copper lugs and single compression type cable glands of following sizes 92 Wall mounted fan/air circulator: Supply and installation of Single Phase, 230 V,600 mm, 16200 CMM, 180 W,industrial duty, fully metallic (including capacitor), wall mounted fan/air circulator. Scope includes supply and installation of 20 A, 3 pin socket in a metallic box near the fan with3 pin top and 500 mm long, 3 core flexible FRLS cable piece for powering the fan. 93 Providing, fabrication, and installation of metallic pedestal fan : Scope include supply and installation of Single Phase, 230 V,450 mm,industrial duty, fully metallic (including capacitor), pedestal fan. 94 Cable removing, re-clamping and dressing: The scope involves removal of existing cable bunches and individual cables (already clamped on wall) for taking up plastering and repair work of wall. The cable shall be clamped back on to the wall neatly once plastering work is completed. The bunches includepower, control and fire alarm system cableshavingouter diameter ranging from 10 mm to 30 mm. The scope includes on-site fabrication of custom aluminum strip clamps to fit the various cable and bundle sizes. 95 Providing and installation of 16 SWG copper earthing wire. The wire shall be clamped alongside other cables and terminated at designated earthing points as required or directed at site.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Maharashtra View Result →
48.
Public Administrative Department #9863096 AOC
Restoration The Damaged Plumbing Items With Necessary Structural Works And Washing, Surging At Submersible Sections At Cossipore Mahasmashan- 1 BUILDING WORKS ( C ) Brickworks,Concrete Works etc 10?.Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, inground floor as per relevant IS codes.(i) Pakur Variety 2 BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 8. M.S. works in brackets madefrom flats, angles, tees etc. to sizes specialy bent, twisted, forged;making holes drilled and fitted to rafter of trusses with necessarybolts, nuts, washer or screws etc. (length of straight not less than 230mm) (To be used for repair works only) 3 BUILDING WORKS ( C ) Brickworks,Concrete Worksetc.40..Reinforcement for reinforced concrete work in all sorts ofstructures including distribution bars, stirrups, binders etc initialstraightening and removal of loose rust (if necessary), cutting torequisite length, hooking and bending to correct shape, placing inproper position and binding with 16 gauge black annealed wire atevery intersection, complete as per drawing and direction.(a) Forworks in foundation and upto roof of ground floor/upto 4 m.(i) Torsteel/Mild Steel.I. SAIL/ TATA/RINL. 4 BUILDING WORKS ( C ) Brickworks,Concrete Works etc?36..Hireand labour charges for shuttering with centering and necessarystaging upto 4 m using approved stout props and thick hard woodplanks of approved thickness with required bracing for concrete slabs,beams and columns, lintels curved or straight including fitting, fixingand striking out after completion of works (upto roof of groundfloor).(When the height of a particular floor is more than 4 m theequivalent floor height shall be taken as 4 m and extra for worksbeyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 mor part thereof).(b) Above 30 mm & upto 37 mm thick woodenshuttering as per decision & direction of Engineer-In-Charge.Notes:-For shuttering in shell roof, grid roof with vertical faces folded plate,arched roof the rate in 36 (a), 36 (b) & 37 (c ) of subhead B above tobe increased by 100 % . For grid roof with splayed faces, rate is to beincreased by 150%.Notes:- For shuttering in shell roof, grid roof withvertical faces folded plate, arched roof the rate in 36 (a), 36 (b) & 37(c ) of subhead B above to be increased by 100 % . For grid roof withsplayed faces, rate is to be increased by 150%. 5 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 4.Supplying, fitting and fixing Peets valve fullway gunmetal standardpattern best quality of approved brand bearing I.S.I. marking withfittings (tested to 21 kg per sq. cm.). (ii) 80 mm dia 6 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 5.Supplying, fitting and fixing gunmetal wheel valve of approved brandand make tested to 21 kg per sq. cm. (for water lines only). (ii) 80 mmdia 7 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 19(I)Supplying, fitting and fixing PVC pipes of approved make of Schedule80 (medium duty) conforming to ASTMD - 1785 and threaded tomatch with GI Pipes as per IS : 1239 (Part - I). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo,nipple, longscrew, reducing socket, reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes, makingthreads,fitting, fixing etc. complete in all respect including cost of allnecessary fittings as required,jointing materials and two coats ofpainting with approved paint in any position above ground. (Paymentwill be made on the centre line measurements of total pipe lineincluding all specials. No separate payment will be made foraccesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes (Dia) (h)80 mm 8 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 19(I)Supplying, fitting and fixing PVC pipes of approved make of Schedule80 (medium duty) conforming to ASTMD - 1785 and threaded tomatch with GI Pipes as per IS : 1239 (Part - I). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo,nipple, longscrew, reducing socket, reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes, makingthreads,fitting, fixing etc. complete in all respect including cost of allnecessary fittings as required,jointing materials and two coats ofpainting with approved paint in any position above ground. (Paymentwill be made on the centre line measurements of total pipe lineincluding all specials. No separate payment will be made foraccesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes (Dia) (e)40 mm 9 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 19(I)Supplying, fitting and fixing PVC pipes of approved make of Schedule80 (medium duty) conforming to ASTMD - 1785 and threaded tomatch with GI Pipes as per IS : 1239 (Part - I). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo,nipple, longscrew, reducing socket, reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes, makingthreads,fitting, fixing etc. complete in all respect including cost of allnecessary fittings as required,jointing materials and two coats ofpainting with approved paint in any position above ground. (Paymentwill be made on the centre line measurements of total pipe lineincluding all specials. No separate payment will be made foraccesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes (Dia) (c)25 mm 10 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 1.Supplying, fitting and fixing G.I. pipes of TATA make with allnecessary accessories, specials viz. socket, bend, tee, union, cross,elbo, nipple, longscrew, reducing socket, reducing tee, short pieceetc. fitted with holder bats clamps, including cutting pipes, makingthreads, fitting, fixing etc. complete in all respect including cost of allnecessary fittings as required,jointing materials and two coats ofpainting with approved paint in any position above ground. (Paymentwill be made on the centre line measurements of total pipe lineincluding all specials. No separate payment will be made foraccesories, specials. Payment for painting will be made seperately)(A) For Exposed Work (h) (ii) 80 mm dia. medium quality 11 BUILDING WORKS ( C ) Brickworks,Concrete Works etc A. BRICKWORKS 5. Brick work with 1st class bricks in lime and surki mortar(1:2) (1 lime putty/paste: 2 surki) lime to be slaked at site and themortar to be prepared with such lime putty and first class surki madefrom kiln burnt bricks having its fineness modulus between 2 and 2.5and which passes through B.S. sieve No 8 with correspondes to I.Ssieve No 200 with considerable grinding and pugging it complete. b)In Super structure, ground floor. 12 SECTION 1. ------------BUILDING WORKS (I) PLASTERING,POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor,ceiling etc.) with sand and cement mortar including rounding off orchamfering corners as directed and raking out joints includingthroating, nosing and drip course, scaffolding/staging wherenecessary (Ground floor).[Excluding cost of chipping over concretesurface](ii) With 1:4 cement mortar (a) 20 mm thick plaster 13 BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works incolumns, beams etc. with simple rolled structural members (e.g.joists, angle, channel sections conforming to IS: 226, IS: 808 & SP(6)- 1964 connected to one another with bracket, gussets, cleats asper design, direction of Engineer-incharge complete including cuttingto requisite shape and length,fabrication with necessary bolting, metalarc welding conforming to IS: 816- 1969 & IS: 1995 using electrodesof approved make and brand conforming to IS:814- 2004, haulage,hoisting and erection all complete. The rate includes the cost of rolledsteel section, consumables such as electrodes, gas and hire chargeof all tools and plants and labour required for the work including allincidental chages such as electricity charges, labour insurancecharges etc. Payment to be made on the basis of calculated weight ofstructural members only in finished work as per IS specified weight.Payment for gusset, bracket, cleat, rivets, bolts and nuts may bemake by adding the actual weight of such items with the weight offinished structural members or 7% of weight for finished structuralmembers weighing not less than 22.5 Kg. / m. or 15 % of weight forfinished structal members weighing less than 22.5 Kg. / m. may beincreased allow for bracket, cleat, rivet, bolts and nuts etc. and noseperate payment being made for these items, as per direction ofEngineer In Charge. The rates are considered for a height of erection8m. / 2nd floor level from the ground. Add 1.5% extra over the rate foreach additional floor or 4m. beyond initiial 8m. or part thereof. I) Forstructural members of specified sections weighing less than 22.5Kg./m 14 Dismantling the 12000 cu M/hr I.D. Fan/blower of 12000 cu M /hrcapacity from its foundation by opening the foundation bolts/drivingbolts and flexible compiling of inlet, outlet canvas duct for repairingpurpose. 15 Dismantling the 25 H.P (18.5 KW) squirrel cage motor from itsfoundation by Opening mounting bolts and disconnection of cablesfrom terminal box and open The ...V... belts for repairing purpose (incondition) 16 Supply, and fixing of 2 HP Centrifugal Monoblock pump Make- KSB,AGRIBLOC 20-5050 17 COMPLETE SERVICING AND HEAT VARNISHING 3 PH LTSQUIREL CAGE INDUCTION MOTOR.....AS PER DIRECTION OFE-I-C - [ IRRIGATION & WATER WAYS SCHEDULE - GOVT. OFWEST BENGAL, ITEM NO. 5.3 J3.1] 18 SECTION(A) PLUMBING WORKS (A)-(VI) TUBE WELL(a) OriginalWorks 20 Washing and developing tube well with air compressorpump and engine for 8 (eight) hours continuous pumping per day withnecessary arrangements for testing the yield in gallons per hour withV notch including hire and labour charges for all tools and plants andscaffolding as required. 19 SECTION(A) PLUMBING WORKS (A)-(VI) TUBE WELL (a) OriginalWorks 21 Surging of existing tube well with chemical treatment andbucket wash (prior to use of compressor machine) and developing thetube well with compressor machine at least 3 (three) days at 8 (eight)hours per day till the yield is obtained at least by 75% of the totalspecified yield of the tube well (measured by V notch tank) and drawdown is within the permissible limit of 10% variation and water soobtained after such washing and developing will be free from sandand bacteria for which test report from the Public Analyst is to beobtained. (The rate is inclusive of all labour and materials includinghire charges of tools and plants and cost of materials.) (a) For tubewell from 40 mm to 100mm top enlarged to have yield from 1500 to3000 gallons per hour as per size and yield. N.B. This item is to beexecuted with the special approval of the Engineerin- charge. 20 Sub Total 21 GST 18% 22 CESS 1%
Contract Date: Mar 24, 2026 Contract Value : ₹ 3.47 Lakh
Local Bodies No of Bidders 3
West Bengal View Result →
Haryana View Result →
50.
Educational and Research Institute #9816643 AOC
Supply And Installation Of Nursing Laboratory Items In Gju S And T Hisar , Manikins/Simulators For Demonstrating Nursing Procedures-(1.01) Adult Male & Female Advance , Adult Female Advance , Cpr Made In Usa , Full Body Pregnancy Simulator Lucy Usa , Infant Cpr Usa , Iv Arm (Trainer) Usa , Im Injection Trainer , Id Injection Trainer , Catheterization Trainer (Male) , Catheterization Trainer (Female) , Ostomycare Simulator (Colostorny/Gastrostomy) , Airway Suction/Manageent Trainer Usa , Chest Tube Manikin Usa , Nasogastric Tube Feeding Trainer/Simulator Usa , Furniture- (2.01) Patient Cots-Adult Plain , Patient Cots-Adult (Semi Fowler) , Bed Side Locker , Stool/Chair , Trays With Covers (Stainless Steel)- (3.01) 12 X 18 , 14 X 10 , 11 X 9 , 8 X 5 , Bowls (Stainless Steel)- (4.01) 10 Dimeter , 6 Diameter , 2-4 Diameter , Enema Can (Enamel/Plastic Or Stainless Steel)- (5.01) 1/2 It. Capacity , 1 It. Capacity , Kidney Trays Of Assorted Sizes (Plastic Or Stainless Steels)- (6.01) Large , Medium , Small , Measuring Jugs- (7.01) 1000 Ml. , 500 Ml. , 250 Ml. , Basins (Stainless Steel)- (8.01) Big Size , Medium Size , Catheter Tray With Cover (Stainless Steel) , Knife Tray With Cover (Stainless Steel) , Feeding Cups , Douche-Can , Sputum Mugs , Bed Pans , Urinals - Male , Funnel- (16.01) 4 Diameter , 2 Diameter , Jasrs With Covers- (17.01) 12 X 4 , 611X4 , Dressing Drums- (18.01) 8 X4 , 12 X 9 , Tub For Size Bath , Big Vessel With Lid - Lndolium (For Heating Water)- (19.01) 10It.Capacity , Kettle - 1 It. Capacity , Kettle - 2 It. Capacity , Color Coded Waste Bins With Lids (2 Set) , Trolleys With Upper And Lower Shelves , Mugs , Sauce Pan With Lid- 1 It. , Sauce Pan With Lid -2 It. , Bottle Brush , Gallipots , Pint Measure , Instruments- (20.01) Cheatle Forceps , Sponge Holding Forceps , Artery Clamps- (21.01) Straight 6 , Curved 6 , Dissecting Forceps- (22.01) Toothed , Non-Toothed , Mosquito Forceps , Kochers Forceps , Tissue Forceps , Sinus Forceps , Biopsy Forceps , Scissors- (23.01) Surgical 8 , Bandage , Mayos Cutting , Liver Biopsy Needle , Alice Forceps , Probe , Groove Director With Probe , Mouth Gag , Tongue Depressor , Tongue Holding Forceps , Nasal Speculum , Aural Speculum , Re-Tractors- (24.01) Single Hook , Double Hook , Bladder Sound , Male Urethral Dilator (1 Set) , Packing Forceps- (25.01) Nasal , Oral , Ear Irrigation Syringe , Ear Speculum , Shaving Set , Safety Razor With Blades , Bard Parker Knife Handle (1 Set) , Airway (Adult) , Laryngoscope With 3 Blades - Small , Laryngoscope With 3 Blades - Big , Proctoscope , Infusion Set , Otoscope , Ophthalmoscope , Tracheostomy Set With Various Sizes Of Tracheal Tubes (1 Set) , Head Mirror , Tuning Fork , Oxygen Cylinder With Stand , Oxygen Mask , Infra-Red Lamp , Digital Thermometer , Glucometer Kit , Nebulizer Machine With Rebulizer Mask , Sphygmomanometer- (26.01) Regular , Electronic , Pulse Meter , Catheters- (27.01) Urinary , Foleys , Nasal , Plain , Rectal , Glass Wares- (28.01) Eye Bath-Cup , Pipettes & Droppers (2 Set) , Glass Connections Different Type E.G.- (29.01) Y , Wolfs Bottle , Conical Flasks , Ounce Glass , Dram Glass/Vial , Thermometers- (30.01) Oral , Rectal , Bath/Lotion , Room , Urinometer , Lactometer , Haemoglobinometer , Specimen Glasses , Test Tubes (2 Dozen) , Glass Slide With Cover (2 Dozen) , Bottles - 500 Ml. Capacity For Lotions And Mixtures , Atomizer , Syringes And Needles-Syrings- (31.01) 2Ml. , 5 Ml. , 10 Ml. , 20 Ml. , Tuberculin Syringe , Insulin Syringe With Needle , Lumbar Puncture Needle , Trochar & Cannula For Abdominal Paracentesis , Iv Cannulas Of Different Types And Sizes - Adult , Biopsy Needle-(32.01) Adult , Sternal Puncture Needle , Suture Materials-Needle Holder- (33.01) 6 , 7 , 8 , Needles (Cutting)) , Needles (Round Body) , Suture Cutting Scissors-(34.01) Straight , Curved , Suture Thread- (35.01) Silk (2 Packets) , Cotton (2 Packets) , Catgut-(36.01) Silk (6 Tubes) , Cotton (6 Tubes) , Catgut Tube Breaker , Suture Clip (1 Packet) , Suture Clip Applier And Remover , Rubber Goods-Mackintosh Roll- (37.01) Full Bed Length , Draw Mackintosh , Extra For Treatment And Dressing Etc. , Hot Water Bag , Ice Caps , Gloves Of Different Sizes , Finger Stalls Of Different Sizes (2 Set Each) , Air Rings , Gastric Lavage Tube , Ryles Tube , Flatus Tube , Blakemore Sengstaken Tube , Rubber Tubes With Different Diameter And Size (6 Each) , Douche Nozzle With Different Sizes (2 Each) , Linen-Mattress- (38.01) Adult Plain , Mattress Semi Fowler , Bed Sheets , Draw Sheets , Pillows- (39.01) Large , Small , Pillow Covers- (40.01) Large , Small , Sand Bags With Covers , Blankets , Bed Spreads , Towels- (41.01) Bath , Hand , Surgical , Packing , Towel Clips , Sponge Cloth , Hot Water Bag Cover , Ice Cap Covers , Air Ring/Cushion Covers , Gown , Mask , Patients Clothes-Male 12 Sets , Patients Clothes-Female 12 Sets , Dirty Linen Bag/Box , Leggings6 Pairs , Perinea! Sheets , Triangular Bandages , Many-Tailed Bandages , Eye Shields , Dusters , Slings , T Binder , Screen , Bedside Curtains , Miscellaneous Items- (42.01) Mortar And Pestle , Nelsons Inhaler , Wooden Blocks 2 Pairs , Spirit Lamp , Test Tube Stand , Test Tube Holder , Sterilizer - Small , Portable Autoclave , Torch , Nail Brush , Adult Weighing Scale , Back Rest , Splints Of Different Sizes , Adhesive Tapes , I.V.Stand , Tape Measure , Bucket With Cover , Comb , Microscopes , Stethoscope , Soap And Soap Dish , Dust Bins , Over Bed Table (Heart Table) , Three Way Adapter , Dettol (1 Bottle) , Phenyle (1 Bottle) , Methylated Spirit (1 Bottle) , Benedicts Solution (1 Bottle) , Tr. Lodine/Betadine (1 Bottle) , Tr. Benzoin (1 Bottle) , Nitric Acid (1 Bottle) , Acetic Acid (1 Bottle) , Sulphur Powder (500 Gm) , Ammonium Sulphate Crystals (500 Gm) , Vaseline(1 Jar) , Glycerin (1 Bottle) , Liquid Paraffin(1 Bottle) , Postassium Permanganate Crystals (200 Gm) , Boric Solution (1 Bottle) , Hydrogen Peroxide (1 Bottle) , Sodium Bicarbonate Powder (200 Gm) , Litmus Paper Strips - Red And Blue , Advanced Nursing Laboratory- (43.01) Advanced Iv Arm/ Arterial Puncture Arm , Ecg Machine/Ecg Simulator , Defibrillator Cpr Trainer , Community Health Nuring- (44.01) Electric/Induction Stove , Eligible Couple And Child Register , Diary , Tables (One For Four Students) , Chairs , Steriliser , Infantweighing Scale , Salter Scale , Spring Balance , Weighing Machine , Sphygmomanometers - Regular , Sphygmomanometers - Electronic , Stethoscopes , Dari/Rnats For Health Education Purpose , Community Bag , Assessment Articles:- The Bag Should Have Separate Compartments For Clean Articles, Hand Washing Kit And Urine Testing Kit. It Should- (45.01) Thermometer , Tape Measure , Stethoscopes , Fetoscope , Hand Washing Articles: (46.01) Soap Dish With Soap , Hand Towel , Nail Brush , Water Proof Bag , Urine Testing Kit: (47.01) Test Tubes , Test Tube Holder , Spirit Lamp , Dropper , Benedicts Solution In A Bottle , Glass Syringe , Dressing Kit: (48.01) Bag Of Sterilized Dressing , Antiseptic In A Bottle , Artery Forceps , Dissecting Forceps Non-Toothed , Dissecting Forceps Toothed , Small Bowls , Small Kidney Tray , Suture Cutting Scissors/Dressing Scissors , Medicines: Labeled Medicines For Essential Treatment Of Monor Ailments , Pre-Clinical Sciences Laboratory: Realia, Specimens And Equipments-(50.01) Adult Human Articulated Skeleton With Hanging Facility , Full Set Of Dis-Articulated Adult Human Skeleton , Open Racks For Displaying The Specimen , Anatomy Dissection Kit , Microscope - 5 Nos. Monocular, 5 Nos. Binocular , Models- Full Size Human Body Showing All Muscles And Arteries , Human Torso-(52.01) Male , Female , Skin Cross Section , Heart And Large Blood Vessels , Heart With Detachable Parts On A Stand , Eye With Detachable Parts On A Stand , Ear With Different Sections , Human Brain With Spinal Cord , Lungs And Trachea , Larynx , Digestive System-(53.01) Stomach , Small Intestine , Large Intestine , Hepatobiliary System , Female Reproductive System , Uterus On Stand , Ovaries-(54.01) Macroscopic Structure , Microscopic Structure , Male Reproductive System , Urinary System (Kidney)-(55.01) Macroscopic Structure , Microscopic Structure , Joints And Ligaments-(56.01) Wrist , Ankle , Elbow , Knee , Shoulder , Hip , Teeth , Charts-(57.01) Skeleton System , Muscular System Showing Different Muscles Of The Body , Joints And Ligaments , Nervous System-(58.01) Brain , Spinal Cord , Cardio-Vascular System , Respiratory System , Lungs. , Trachea , Larynx , Digestive System , Oral Cavity , Teeth , Stomach, Pancreas And Spleen , Small Intestine , Large Intestine , Liver And Gall Bladder , Kidney - Macroscopic Structure , Skin , Eye , Ear , Female Reproductivesystem , Menstrual Cycle , Male Reproductive System , Endocrine Glands , Charts On First Aid-(59.01) First Aid For Burns , Cardiac Pulmonary Resuscitation - Adult , Bandaging - Different Types (1 Each) , Models And Manikins (Mannequins)/Simulators-(60.01) Stages Of Development Of Embryo Model , Abdominal (Antenatal) Palpation Manikin With Leopold Manoeuvere , Human Fetus Replicas Set Of 2 , Child Birth (Advanced Birthing) Simulator , Episiotomy Suturing Simulator , Cervical Dilatation Model , Female Pelvis Model , Fetal Skull Model , Placenta , Breast Examination Model , Essential New Born Care & New Born Resuscitation Manikin & Kit (Neo Nate) , Baby Doll/New Born Baby , Adult Iv Arm Training Kit , Im Injection Training Manikin , Female Catheterization Manikin , Manikin For Simulation And Management Of Ppi-( (Mama Natalie) , Adult Cpr Manikin , Zoe Model With Post-Partum Uterus For Iucd Insertion (Gyneoiogical Simulator) , Anteverted And Retroverted Uterus Model , Hand Held Uterus Model , Penile Model , Charts-(61.01) Pregnancy Chart (Breast Changes And Uterus Changes) , Fetal Development Chart , Edd Calculator Chart/Wheel , Stages Of Labour-(62.01) First Stage , Second Stage , Third Stage , Birth Chart , Enlarged Partograph (As In Sba Guidelines) , Abnormal Presentations (Breech/Shoulder Presentation) 1 Each , Face Presentation , Brow Presentation , Twin Pregnancy , Placenta Praevia - Different Degrees , Ab Ruption Of Placenta , Caput Succedaneum, Cephalhaematoma , Congenital Malformations Of New Born- (63.01) Cleft Lip - Palate , Spina Bifida , Hydrocephalus , Anencephalus , Government Of India Sba Charts(1 Set) , Anatomy Of Female Reproductive System , Anatomy Of Male Reproductive System , Family Planning Flip Book , Bp/Cr Flip Book For Counseling , Mec Wheel , Eqipment/Instruments-(64.01) Bp Apparatus (Digital) , Stethoscope , Fetoscope , Thermometer (Digital) , Measuring Tape , Dictaphone , Watch With Seconds Hand , Adult Weighing Scale , Sahlis Heamoglobinometer , Glucometer (Plasma) , Stirrer (Plastic/Wooden) , Functional Focus Lamp , Spare Bulb For Focus Lamp , Stop Watch , Kidney Tray , Hub Cutter , Spirit Lamp , Test Tube , Test Tube Holder , Steel Tray (12 X 11) With Lid , Artery Forceps , Straight Scissors (8) , Curved Scissor (Episiotomy Scissors) , Needle Holder , Plain Dissecting Forceps , Toothed Dissecting Forceps , Cheatle Forceps , Cheatle Forceps Holder , Radiant Warmer , Foot Operated Suction Machine (Optional) , Nr Bag , Baby Weighing Machine , Infantometer , Penguin Mucus Sucker/De Lees Mucous Extractor , Shoulder Roll , Self-Inflating Resuscitation Bag (250 Ml Capacity) , Self-Inflating Resuscitation Bag (500 Ml Capacity) , Mask (0 Size) , Mask (1 Size) , Oxygen Hood , Nebulizer , Salbutamol Metered Dose Inhaler(Mdi) With Spacer , Plastic Bowl , Steel Bowl With Lid (Small) , Plastic Containers(Closed) , Plastic Basin , Measuring Spoons (Different Sizes) , Trays To Be Kept In The Labor Room: Delivery Tray, Episiotomy Tray,Baby Tray, Medicine Tray, Emergency Drug Tray, Ppiucd Tray- (65.01) Fp Counselling Kit , Contraceptive Basket:(5 Each) - 1 Plastic Basin Containing, Ocp (Mala-N), Cu-T 380A, Cu 375 (Multi-Load), Male/Female Condoms, Emergency Pills , Scissors (Plain) , Kellys Pad , Sims Speculum , Cuscus Speculum , Long Artery Forceps , Mayos Scissors , Vulsellum/Tenaculum , Uterine Sound , Anterior Vaginal Wall Retractor , Sponge Holder , Ppiucd Forceps/Kellys Forceps , Large Plastic Tub , Ss Drum , Puncture Proof, Leak Proof, Tamper Proof Containers , Boiler , Autoclave With Drum , Big Steam Sterilizer , Electric/Induction Stove , Foot Operated Color Coded Bins - 4 Colors (Yellow, Red,Black &Blue) - (66.01) Yellow , Red , Black , Blue , Iv Stand , Furniture-(67.01) Labour Table With Foam Mattress - , Delivery Trolly , Consumables-(68.01) Glucometer Strips & Lancets , Distilled Water (1 It.) , N/10 Hcl (2/5 It.) , Dropper , Rdt Malaria Kit , Uristix (100 Strips/Box) , Pregnancy Detection Kit , Specimen Container , Benedias Solution (100 Ml/Bottle) , Acetic Acid (100 Nil/Bottle) , Match Box , Spirit (100 Ml/Bottle) , Examination Gloves - Medium & Large- (69.01) Medium , Large , Cotton Roll (500 Gm) , Cotton Swabs Pieces (Packet) , Cotton Gauze Pieces (Packet) , Adhesive Tape (Roll) , Povidone Iodine (Betadine) -100 Ml/Bottle , Cord Clamp , Sterile Suction Catheters (New Born Size) , Eye Pads (New Born) , Catgut Mounted With Round Body Needle , Sterile Pads (Packet) , Inj. Oxytocin(5Iu) Ampules , Inj. Oxytocin(10 Iu) Ampules , Misoprostol Tablets (600 Mcg) , 2% Xylocaine (25 Ml/Bottle) , Lnj. Mg504 50% (2 Mt/Arnpule) , Salbutamol Respules , Identification Tag - New Born , Identification Tag - Mother , Marker Pens (Blue, Red, Green And Black)1 Box Each , Ppe-(70.01) Apron , Cap (100/Pack) , Mask (100/Pack) , Goggles , Shoe Cover (Pair Wise) 100 Pk , Sterile Gloves - 6.5 (25 Pairs/Box) , Sterile Gloves - 7 (25 Pairs/Box) , Shoe Cover Dispenser , Iv Cannulas (Different Sizes) & Iv Set , Iv Fluids - Runs , Tourniquet , Intravenous Catheter (Venflon 16,18,20,22,24 Size Needle)- (71.01) 16 Size , 18 Size , 20 Size , 22 Size , 24 Size , Syringes - 25 Ml,10 Ml, 5 Ml, 2 Ml With Needle (Box Of 25) - (72.01) 2 Ml (2 Box) , 5 Ml (2 Box) , 10 Ml (2 Box) , 25 Ml (2 Box) , Needles (22 Gauze) , Foleys Catheter , Plain Catheter , Uro Bag , 1Ucd (Expired Ones May Be Used) , Disposable Nasal Prongs - Adult , Disposable Nasal Prongs -Child , Linen-(73.01) New Born Dress , Caps (New Born) , Socks (New Born) , Diaper/Nappy (30 Pieces/Packet) , Blanket (New Born) , Blanket (Mother) , Bed Sheets , Pillow , Pillow Covers , Draw Sheets , Towel (1 Meter) , Kmc Dress , Delivery Gown , Curtains (6 Feet Length) , Plastic Teaspoon , Soft Brush , Utility Gloves (Rubber) , Liquid/Powder Detergent (1 Kg/Packet) , Cardboard Boxes With White Colored Marking , Cardboard Boxes With Blue Colored Marking , Red And Yellow (Chlorinated And Non- Chlorinated Colored Palastic Bags Or Containers , Autoclave Safe Plastic Bags/Container , Plastic Trays , Plastic Mug (1 It.) , Measuring Jar (2 It.) , Dry Duster (Cloth) , Mops , Pitcher (10-15 It.) , Child Health Nursing-Models And Manikins (Mannequins)/Simulators- (74.01) Pediatric Training Manikin , Infant Airway Management Trainer , Child Airway Management Trainer , Infant Injectable Head , Infant Auscultation Simulator , Ng Tube Trainer (Pediatric) , Pediatric Multi Venous Training Arm Kit , Charts-(75.01) Growth And Development Chart , Weaning Foods Chart , Breast Feeding Positions , Imnci Chart (12 Posters) (1 Set) , Cpr - Infant , Cpr - Child , Equipment/Instrauments-(76.01) Feeding Tubes (5 & 6 Size) , Feeding Cups , Feeding Spoons/Katori And Spoon (6 Set) , Measuring Spoons (1 Set) , Measuring Cups (1 Set) , Infantometer , Breast Pump , Biopsy Needle - Child , Iv Cannula And Sets , Iv Stand , Infusion Pump/Syringe Pump , Muscus Sucker , Sauce Pan (3-5 It. Capacity) , Electric/Induction Stove , Emergency And Drug Tray , Nebulizer With Mask (Different Sizes For Child) , Syringes With Needles - 25/10/5/2 Ml-(77.01) 2 Ml , 5 Ml , 10 Ml , 25 Ml , Toys For Different Age Groups-(78.01) Weighing Scale - Infant , Weighing Scale - Child , Plastic Basin For Baby Bath And Other Accessories (Hair Oil, Shampoo, Soap Dish With Soap/Body Wash, Body Lotion/Body Oil, Powder Etc.) , Furniture-(80.01) Patient Cots (Child) , Bed Side Locker , Stool/Chair , Linen- (81.01) Mattress (Child) , Mattress Cover , Bed Sheets , Draw Sheets , Blankets , Towels , Diaper For Infants - Different Sizes , Sponge Cloth , Duster , Midwifery Kit For Home Delivery , Bowls - Small , Bowls - Medium , Kidney Tray - Small , Kidney Tray - Medium , Enema Can With Tubing , Fetoscope , Artery Forceps , Thumb Forceps- Toothed , Thumb Forceps- Non-Toothed , Cord Cutting Blade/Scissors , Cord Ties , Mucus Sucker , Mackintosh (2 Pairs) , Gloves , Mask , Apron , Rubber Catheter , Spring Balance - Color Coated , Syring With Needles - 2Cc - 5Cc - 10Cc- (101.01) 2Cc , 5Cc , 10Cc , Shaving Set , Spirit , Soap With Dish , Hand Towels , Measuring Taps
Contract Date: Mar 17, 2026 Contract Value : ₹ 68.00 Lakh
Boards / Undertakings / PSU No of Bidders 5
Haryana View Result →
TenderDetail
Loading tenders