View Bid Results For Rotary Evaporators Tenders

We found 853 Bid Results related to rotary evaporators tenders. You can find Contractor details who won rotary evaporators tenders along with contract details in Bid awards announcements section.

Filters
Stage
749
76
28
Tender Publishing Platform
536
317
State / UT
34
97
85
79
67
47
46
39
38
36
36
35
35
24
24
22
21
17
17
16
14
10
8
5
5
5
4
4
4
4
3
2
2
1
1
Contract Value
162
424
224
41
Publish Date
1
0
0
0
0
Sector
24
373
68
67
64
54
37
32
24
22
22
14
11
9
9
8
8
5
5
4
2
2
1
1
1
Ownership
7
370
180
139
135
14
3
2
Within keyword
Active filters:
Showing 1–18 of 853 tenders matching your filters
1.
Science and Technology #11440503 Technical Bid
Tender for Earth Work , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lif. , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Cement Concrete (Cast In Situ) , Providing And Laying In Position Excluding Cement Concrete Of Level: Specified Grade The Cost Of Centering And Shuttering - All Work Up To Plinth 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Ill) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Stone Work , Coursed Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With :Cement Mortar 1:6(1 Cement : 6 Coarse Sand) , Cladding Work , Providing Edge Moulding To 18Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge,Granite Work , Wood And P. V. C. Work , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing 40X5 Mm Flat Iron Hold Fast 400 Mm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 300X100x150 Mm 1:3:6 Mix (1 Cement: 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. , Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute, To Be Provided By The Manufacturer For (I) Sites With Basic Wind Speed 45 M/Sec As Per Is 875 - Part 3 (Ii) Sites With Structure Height More Than 20M For All Wind Speedscasement Window Double Panels With Fixed Mullion With S.S. 304 Friction Hinges As Per Size And Weight Of Sash, Multi-Point Locking System, Zinc Alloy (Zamak) Powder Coated Handles.Using R2 Series With Frame (39 Mm & Above) X (39 Mm & Above) & Sash (39 Mm & Above) X (60 Mm & Above) & Mullion (39 Mm & Above) X (60 Mm & Above). (Height Upto 1.2 Metre). , Steel Work , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Flooring , Providing And Laying Vitrified Tiles In Floor In Diferent Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Double Charge Vitrified Tile Polished Finish Of Size Of Tile 600 X 600 Mm , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Finishing , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Coarse Sand) , 6 Mm Cement Plaster 1:3 (1 Cement: 3 Fine Sand) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of Reinforced Cement Concrete Slabs And Beams. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , 12 Mm Thick Plain Cement Mortar Bands In Cement Mortar 1:4 (1 Cement: 4 Fine Sand):Moulded Band , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Itr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Or More Coats On New Work , French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content.With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Litre , Dismantling And Demolishing , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge.Nominal Concrete 1:3:6 Or Richer Mix (Including Equivalent Design Mix) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Aluminium Work , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete.Upto 5 Mm Depth And 5 Mm Width , Market Rate Items , Provinding Precast Cement Concrete Solid Block Masonry Including Hoisting And Setting In Position With Cement Mortar 1:6 (Cement :6 Coarse Sand) Completed As Per The Direction Of Engineer In Charge As Per Site Condition , Providing And Fixing 5 Mm Thick Clear Transparent Acrylic Sheet Of Approved Brand And Manufacture For Fixed Curved Portions In Openings, Including Epdm Rubber/Neoprene Gasket And All Necessary Accessories, Complete In All Respects As Per The Directions Of The Engineer-In-Charge. , Electrical Work , Laying And Fixing Of One No Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Upto 35 Sq.Mm (Clamped With 1Mm Thick Saddle) Size On Wall Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 4 X 16 Sq. Mm (25Mm) Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. , Supplying And Fixing Of 4 Way (4 + 12), Double Door Surface/ Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs As Required . , Supplying And Fixing 6 Way, Double Door, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator. , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole And Neutral , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole And Neutral , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.4 X 6 Sq. Mm + 2 X 6 Sq. Mm Earth Wire , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 6 Module (200Mmx125mm) , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 5/6 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 15/16 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3 Pin 5/6 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 6 Pin 15/16 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Bell Push , 2M Stepped Type Electronic Fan Regulator , Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Group Controlled (Looped) Light Point/ Fanpoint/ Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit,And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. (Group-C) , Providing And Fixing 6 Swg Dia G.I Wire On Surface Or In Recess For Loop Earthing As Required. , Supplying, Installation, Testing & Commissioning Of Photo Electronic Smoke Detector With Builtin Led And Mounting Base Plate Suitable With Ms Junction Box For Operation On 12V / 24V Complete With All Connections Etc. As Required. , Supplying, Installation, Testing & Commissioning Of Manual Call Box Of Abs Type In Surface/Recess With Stainless Steel Chain & Hammer Assembly Complete With Glass And Push Button Etc. As Required. , Supplying & Laying Of 2 X 1.5 Sqmm Fire Alarm Armoured Cable, 600/1000V Rated With Annealed Copper Conductor Having Xlpe Insulation, Steel Wire Armouring & Frls Outer Sheath Complete As Required. , Supplying And Fixing Dp Sheet Steel Enclosure On Surface / Recess Along With Upto 32A, 240 V, C Curve Dp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 30 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 32 A C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supplying And Fixing 20 A, 240 V, Spn Industrial Type Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A C Curve, Spmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep,Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Speed Control Compitable For Electronic Type Regulator And All Remaining Accessories Including Safety Pin,Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Including Fixing Fan Hook In Ceiling Complete As Required. , Supplying, Installation, Testing & Commissioning Of Panel Light 2X2 Ft.,40W Of Powder Coated Die Cast / Extruded Aluminium Body (Thickness ≥ 1.20 Mm) Body Material And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency 85%, Operating Voltage Ac 140 270 Volt, Freq 50/60 Hz, Operating Temp Range -15 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection, Thd 10% , P. F.≥0.95, Ip20, Cri 80, Ugr (Unified Glare Rating) 19, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With, 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11Report, Cct 5700°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Complete In All Respect I/C Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. System Lumen Efficacy ≥105 Lm/Watt Output . Lm79 & Lm80 Test Report From Nabl Lab For All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. , Supplying And Fixing Of 25Mm Size Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supplying And Drawing 1 Run Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended/Surface Mount From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 V, Complete As Required. , Supplying And Fixing Fp Mcb Sheet Steel Enclosure With Din Rail On Surface / Recess Etc. As Required. , Supplying & Fixing Of 4Pole, 63 A Rating, 415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 16Sq.Mm, Aluminium , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 6Sq.Mm, Copper , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,3C X 4 Sq.Mm, Copper , Supply And Laying Of Un Armoured Copper Single Core 10 Sq.Mm Flexible Cable With Annealed Copper Conductor In Suitable Size Hdpe Pipe In Ground/ On Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.4 X 6 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.3 X 4 Sq.Mm , Supply ,Installation, Testing And Commissioning Of 2 Tr/24000Btu Per Hour And Bee-5 Star Rated Wall Mounted Inverter Type Hi Wall Split Cooling Air Conditioner Having Wireless Remote Controller, Hermetically Sealed/Scroll/Rotary Compressor And Eco Friendly Refrigerant,Initial Charge Of Refrigerant,Condensor And Evaporator Coils Of Copper Material, Air Filter With Auto Swing & Auto Restart Features, Suitable For Operation On 230V, Single Phase, 50Hz, Ac Power Supply. The Indoor Unit Shall Be Fixed Rigidly On Wall Using Necessary Frame, The Outdoor Unit Shall Be Mounted On Wall Or Floor Using Suitable Powder Coated Ms Angle Frame As Required. Including Clamps, Bolts, Nuts,Vibrating Dampers, Laying Of 3 Meter Standard Length Of Copper Refrigerant Piping With 3 Meter Pvc Covering Pipe, 3 Meter Drain Piping, Wrapping Tape And Necessary Insulation ,Electrical Flexible Cable Connectivity Between Indoor And Outdoor Unit. Necessary Drilling Of Hole And Finishing The Same To Match For The Surrounding As Required. , Supplying And Fixing Of Frp Box 200Mmx140mmx95mm Size (Nominal Size) On Surface With Hinged Door With Suitable Grounding Copper Bar Link With Holes Fitted Inside The Box Etc. As Required. , Supplying And Fixing Of Dual Rj 45 / Io Outlet On Existing Modular Switch Plate. , Supply,Installation,Testing And Commissioning Of Maintenace Free Earth Pit Of Single Pipe Technology Copper Pipe Of 2000Mm Long (Min), Outer Dia 50 Mm, Wall Thickness 1.2Mm(Min), Filled With Highly Conducting Metallic Compounds With The Permanent Sealing At Both The Ends And Lead Terminal Of 50 X 10 Mm Size At The Top The Length Of The Electrode Shall Be 2000 Mm Excluding The Lead Terminal And The Length Of The Lead Terminal At The Top Shall Be Minimum 50Mm. To Ensure The Moisture Content And Electrical Conductivity, Resistance Lowering Grounding Minerals Shall Be Filled Around The Electrode Of (Min25 Kg) .Heavy Duty Weather Proof Plastic Earth Pit Chamber With Cover Of Dimension 300 Mm Dia (Top), 260 Mm Dia(Bottom) And 300 Mm (Height) Shall Be Used, Numbering Of Pit And Measured Value Written With Weather Proof Painting Or Stickering. As Required.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
2.
Health and Family Welfare #11422678 AOC
Bids Are Invited For Rotary Evaporator Total Quantity : 4
Contract Date: Ref. Documents Contract Value : 29.99 Lakh
Government Departments No of Bidders 10
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 1.94 Lakh
Government Departments No of Bidders 2
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 49,560
Government Departments No of Bidders 1
5.
Agriculture #11333050 Technical Bid
Tender For Fabrication And Erection -- 1 Boiler 2 Dismantling, Fabrication, Erection Of Leak Proof Dampers At Pa, Sa,Fd & Id Fans 3 Dismantling, Fabrication & Erection Of Air Heater Outlet Top Plate. 4 Dismantling, Fabrication, Erection Of Ro Water Storage Tanks Canopy And Railing. 5 Dismantling, Fabrication & Erection Boiler Furnace Ash Discharge Hopper 6 Dismantling, Fabrication & Erection Of Air Heater Outlet Bottom Plate. 7 Dismentling , Fabrication Erection Of Rotory Bagasse Feeder Casing 8 Dismentling , Fabrication Erection Of Belt Conveyor Structure 9 Dismantling, Fabrication & Erection Of S.A. Fan Foundation 10 Dis, Fabrication And Erection Work Of Expansion Bellows At Fd, Id, Esp, Economizer, Aph 11 Ducting Work With Structure 12 Strengthening Of Ducting Of Boiler. 13 Dismantling, Fabrication & Erection Of F.D. Fan Foundation 14 Dis, Fabrication And Erection Of Id Fan Upper & Lower Casing 15 Dis, Fabrication And Erection Of F.D. Fan Upper & Lower Casing 16 Dismantling, Fabrication & Erection Of Drum Type Rotary Bagasse Feeder (With Shaft) 17 Dismantling, Fabrication & Erection Of Screw Feeder 18 Dismantling, Fabrication & Erection Of Screw Feeder Casing. 19 Fabrication & Erection Of Man Hole 24”X24” 20 Dis., Fab & Erecting Of Aph Tubes (Replacement) 21 Dis, Fab & Erection Of R.O Plant Pressure Vessel Stand 22 Fab & Erection Of Fire Fighting Pipe Line Including Valves, Bends, Flange & Support ( Using New Pipeline & Old Drum To Drum Tubes) 23 Travelling Grate Front Side Ash Discharge Plate Dis, Fab & Erection With Structure 24 Fab & Erection Of Travelling Grate Rear Plate Flange (Flange Type ) 25 Fabrication & Erection Of Pneumatic Spreader Assembly From 10 Mm Thk. S.S. Plate With Fabrication & Erection Of Deflector Plate From 20Mm Thk. S.S. Plate With Top & Bottom Flange 26 Dismantling Of Old Pneumatic Spreader Assembly & Internal Deflector Plate 27 Dismantling & Fitting/ Replacement Of Id Fan Impeller 28 Fabrication & Erection Of Id Fan Suction Bend 29 Fabrication & Erection Of Id Fan Suction Cone 30 Fabrication & Erection Of Plate & Spindle Type Damper With Flanges 31 Dismantling, Fabrication & Erection Of Rotary Soot Blower 32 Dismantling, Fabrication & Erection Of Long Retractable Soot Blower 33 Dismantling, Fabrication & Erection Of Economizer L.H.S. & R.H.S From 6 Mm Thk. M.S. Plate With Strengthening From 65 X 65 Angles 34 Fabrication & Erection Of 1.5 Kg/Cm2 Prds, Exhaust & Vapour Pipeline From 10Mm Thk. M. S. Plate 35 Fabrication & Erection Of 1.5 Kg/Cm2 Prds, Exhaust & Vapour Pipeline Drains 36 Dismantling, Overhauling And Fitting 1.5 Kg/Cm2 New Prds(25 Tph) 400 N.B Valve 37 Dismantling, Fabrication & Erection Of New Bagasse Discharge Chute At Return Bagasse Carrier With Gate Arrangement Complete Set In All Respect 38 Fabrication And Erection Of Boiler Outlet/Economizer Hopper 39 Fabrication And Erection Of Water Monitor On Fire Fighting Line 40 Fabrication And Erection Of Fd Fan Suction Cone 41 Replacement Of Travelling Grate Skid Rail 42 Boiling House 43 Platform Work At Various Stations Such As Mill House, Boiler, Turbine, Cranes, Boiling House, C/F House Etc. If Required Anywhere With Structure Strengthening 44 Dismantling , Fabrication & Erection Of Foundation Of Pump & Motor 45 Fitting Of Motor 46 Repairing Of Exhaust Valve 47 Fab & Erection Of Double Filtration System For Quad & Water Inlet Pipe In Pan Condenser. 48 Arrangement For Lifting Of Vaccum Filtered Drums-3 Nos 49 Replacement Of Exhaust And Vapour Valves In The Boiling House. Dis 50 Replacement Of Exhaust And Vapour Valves In The Boiling House Erec- 51 Fabrication Of Electric Motor Cover. 52 Strengthening Of Vapour Pipe Inside & Outside With Angle Iron Rings/ M.S.Plate. 53 Manhole Work In Vapour Pipes/Headers 54 Modification In Bagacillo Chimney 55 Replacement Of Vapour Pipe. A) Dis 56 Replacement Of Vapour Pipe. B) Fab 57 Replacement Of Vapour Pipe. C) Ere 58 Exhaust And Injection Pipeline A) Dis 59 Exhaust And Injection Pipeline B) Fab 60 Exhaust And Injection Pipeline C ) Ere 61 Replacement Of V.Pipe Bends Dis 62 Exhaust & Injection Bends Fab- 63 Exhaust & Injection Bends Erec. 64 Dis,Fab & Ere Of Final Molasses Pipeline 65 Dis,Fab & Ere Of Suction Pipe For Injection, Ct Pump 66 Fab & Erection Of M.S. Vessels, Square & Rectangular Tank 67 Increase Of Shell Height With All The Fitting And Accessories Work. 68 Dis, Fab & Erection Of M.S.Plate Work 69 Dis,Cleaning & Ere Of Pipeline (Juice, Massecuite, Srrup, Molasses Etc) 70 Dis,Fab & Ere Of Coil(Water,Juice,Ammonia,So2Etc) 71 Fab And Erection Of Motor Bed 72 Dis,Fab & Ere Of Nrv For Injection, Turbine, Spray Etc 73 Saveall Of Pan,Quad Dis 74 Saveall Of Pan,Quad Fab 75 Saveall Of Pan,Quad Ere 76 Unloading Of Material From Truck (Ms, Ss, Ci, Acc Etc) 77 Dis, Fab & Ere Of Jay Pipe 78 Fitting Of Baffle Plates 79 Dismantling, Fabrication & Erection Of Belt Conveyor Structure 80 Clarifier Coil Work A) Dismantling 81 Clarifier Coil Work (B) Fabrication 82 Clarifier Coil Work ( C) Erection 83 Dismantling, Fabrication & Erection Of Perforated M.S Plates Of Direct Contact Juice Heaters. 84 Dismantling , Fabrication & Erection Of Strainers Of Injection, Spray , C.T Pumps. 85 Dismantling, Erection (With Alignment) Of Planetary Gear Box Of Crystallizers. 86 Nozzles Of Spray Pond, Condenser. 87 Dismantling (Each Nozzle) 88 Fitting (Each Nozzle) 89 Replacement Of Double Beat Valve 90 Dismantling , Fabrication & Erection Of Exhaust Valve Casing 91 Opening & Fitting Of Juice Heater Covers 92 Dismantling & Fitting Of S.S Tubes In Juice Heater & Evaporator Body 93 Dismantling, Fabrication & Erection Of Mud Mixture Conveyor 94 Dismantling, Fabrication & Erection Of Mud Mixture Casing 95 Dismantling, Fabrication & Erection Of Down Take Umbrella Of Pan 96 Replacement Of 3’’ Coil Of Vertical Crystallizer 97 Gutter Work (Bigger Side Will Be Treated As Dia.) 98 Gutter Work Dismantling 99 Gutter Work Fabrication 100 Gutter Work Erection 101 Jammed Tube Falling Film Evaporator 102 Replacement Of Sluice Valve 103 Fabrication / Strenghting Of Beam, Vessel, Pipe, Channel, Angle Etc. 104 Dis, Fabrication & Erection Of 7 Kg/Cm2 Prds Pipeline 105 Dis, Fabrication & Erection Of 7 Kg/Cm2 Prds Pipeline Drains 106 Replacement Of Readymade Bend 107 Replacement Of Ammonia Pipe Of Pan & Quad 108 Replacing Of Worn Out Brass Zig Zags & S.S Screens Of Vacuum Filter 109 Dismantling, Fabrication & Erection Of M.S Plate ( As Required) 110 Dismantling Of Existing Syrup Sulphitor & Shifting To Scrap Yard 111 Dis., Fab & Erection Of Save All Cone Of Evaporator And Pans 112 Dismantling, Installation And Alignment Of Reduction Gear Box. 113 Dismantling, Fab & Erection Of Agitator 114 Fitting & Replacement Of Batch Type Machine 115 Fitting & Replacement Of Continuous Type Machine 116 Replacement Of Exhaust Balloon 117 Replacement Of Savall Of Quad And Pan 118 Replacement Of Screw Type Arm Of Crystallizer 119 Replacement Of Drive Of Vertical Crystallizer 120 Replacement Of Tube Of Quad And Juice Heater 121 Dis, Fab. & Erection Of Foundation For Clarifier Drive 122 Dismantling, Fabrication & Erection Of Cover Of S400 Semi-Kestner 123 Replacement Of S.S. Pipelines Including Pipe Fittings 124 Replacement Of Seamless Pipeline Including Pipe Fitting 125 Replacement Of Magma Mixer With Arm, Bracket & Gear 126 Dismantling, Fabrication & Erection Of Underground S.S. Pipeline For Condensate Water 127 Dismantling, Fabrication & Erection Of Cone As Per Requirement 128 Modification Of Bagasscillo Cyclone 129 Dismantling, Fabrication, Assembly And Trial Of Mechanical Circulator 130 Modification In Exhaust & Vapour Valve 131 Dismantling, Fabrication & Erection Of Spray Pond Header 132 Dismantling, Fabricaton & Erection Of Basket Housing Cover & Bottom Discharge Chute Of Centrifugal Machine 133 Dismantling, Fabrication & Erection Of Arms Of Clarifier 134 Dismantling, Fabrication & Erection Of Down Tape Of Evaporator Bodies 135 Fabrication & Erection Of Molasses Jacket For Batch Type C/F M/C 136 Hydraulic Testing Of Vertical Crystallizers Complete In All Respects 137 Dismantling, Fabrication & Erection Of Various Stations For Entrainment Catcher 138 Dismantling & Installation Of Super Heater In Boiling House 139 Dismantling & Installation Of Oil Cooler At Turbine 140 Dismantling, Fabrication & Erection Of All High Pressure Line Drains At Turbine 141 Replacement Of Cut Over Valve For Pan 142 Modification Work In Juice Line Below Quad Station 143 Dis., Fabrication & Erection Of Grit Conveyor 144 Dis., Fabrication & Erection Of Sugar Hopper 145 Dis., Fabrication & Erection Of M.S. Tank/Vessel 146 M.S. Pipeline Replacement 147 Dis., Fabrication & Erection Of Vapour/ Exhaust Line From Quad To Pan Station 148 Dismantling And Fitting Vapour/Exhaust Valve 149 Dismantling, Fabrication & Erection Of Bagassecillo Line 150 Dismantling, Fabrication & Erection Of Underground & Outside Pipeline Of All Sizes 151 Boiler/Turbine, Cooling Tower Sugar Godown/Workshop/Store/Cane Unloader & Factory 152 Fab & Erection Of Gate 153 Strengthning Of Tress Beams,Vessel,Pipe With Channel,Angle,Pipe Etc Any Where 154 Fab & Erection Of M.S.Stair/Ladder Single Story 155 Fab & Erection Of M.S.Stair/Ladder Double Story 156 Dismantling, Fabrication & Erection Of Underground And Outside Pipeline Of All Sizes 157 Fabrication & Erection Of Nrv Of Ct Pump 158 Dismantling, Fabrication & Erection Of Turbine Silencer 159 Dismantling, Fabrication & Erection Of Cooling Tower Pipeline From Cooling Tower Of Turbine 160 Misc .Items. 161 M.S Pipeline Per Inch Dia//Ft/Length (A ) Dismentling Of Pipe Line. 162 Upto 1” Dia To 12’ Dia. 163 Above 12” 164 Fabrication Of Pipe Line From M.S.Plate Or Ready-Made Pipe Any Dia. 165 Erection Of Pipe Line Per Inch Dia/Ft/Length (I) Upto 1’ Dia To 166 Erection Of Pipe Line Per Inch Dia/Ft/Length (Ii. Above 12” Dia 167 M.S.Pipe Accessories Work, Dismantling Of Bends, Tee, Reducder, Cross, Elbow, Nipple, Nozzle, Flanged, And Bends. (Per Inch Dia/Ft/Length ) (A) Upto 1”Dia To 12” Dia 168 M.S.Pipe Accessories Work, Dismantling Of Bends, Tee, Reducder, Cross, Elbow, Nipple, Nozzle, Flanged, And Bends. (Per Inch Dia/Ft/Length (Ii.) Above 12” Dia. 169 Fabrication Of Bends, Tee, Reducer Etc.-(P.Inch Dia/Ft) (I) Upto 1”Diato 12” Dia 170 Fabrication Of Bends, Tee, Reducer Etc.-(P.Inch Dia/Ft) ( Ii) Above 12\ Dia.. 171 Erection Of Bends, Tee Etc.(Per Inch Dia/Ft/Length) (I) Upto 1” Dia To 12” Dia 172 Erection Of Bends, Tee Etc.(Per Inch Dia/Ft/Length) Ii) Above 12” Dia 173 Valve Work 174 Dismantling Of Valves, (Per Inch Dia/Pc) Upto 1” Dia To 12” Dia 175 Dismantling Of Valves, (Per Inch Dia/Pc) Above 12” Dia 176 Erection Of Valve 177 Dismantling Of Valves ,(Per Inch Dia/Ft/Length) (I) Upto 1” Dia To 12” Dia 178 Dismantling Of Valves ,(Per Inch Dia/Ft/Length( Ii) Above 12” Dia 179 Plateform Work (Per Sft) 180 I) Dismantling 181 Ii) Fabrication And Erection 182 A) Patch Work With Old Material. 183 B) Patch With New Material . 184 Purling In Work.(Per Rft) (I) Dismantling 185 Fabrication & Erection 186 Cutting Of Old Flange Repairing For Reuse & Fitting 187 Dis, Fabrication And Erection Of Distance Piece 188 Mill House 189 Replacement Of Ms Plate Work, Weak Portion Of Cane Carrier, Chopper, Leveller, Fibrizer, Bagasse Elevator, Mbc,Rbc,Bc Etc A) Dismantling 190 Replacement Of Ms Plate Work, Weak Portion Of Cane Carrier, Chopper, Leveller, Fibrizer, Bagasse Elevator, Mbc,Rbc,Bc Etc B) Fabrication 191 Replacement Of Ms Plate Work, Weak Portion Of Cane Carrier, Chopper, Leveller, Fibrizer, Bagasse Elevator, Mbc,Rbc,Bc Etc C) Erection 192 Hc Flat Replacement Angle, Beam & Channel. 193 Dismantling, Fitting & Alignment Of C-Channel & Teflon Runner Of Rake Carriers . 194 Fabrication & Erection Of Trpf Cover 195 Dismantling, Fabrication & Erection Of Guide(Salami) 196 Dismantling, Fabrication & Erection Of Trough Of Bagasse Carriers 197 Dismantling, Fabrication & Erection Of Bagaescillo Pipe 198 Fabrication & Erection Of Discharge Chute 199 Dismantling, Fabrication & Erection Of Be,Mbc & Rbc Trough 200 Dismantling, Fabrication & Erection Of Be,Mbc & Rbc Side Plate 201 Dismantling, Fabrication & Erection Of Discharge Chute Of Mbc Belt Conveyor 202 Dismantling, Fabrication & Erection Of Foundation Bed Of Pump, Motor, Gear Boxes 203 Fabrication & Erection Of Weak Portion Of Cane Unloader Bridge, Trolley Etc 204 Dismantling,Fabrication & Erection Of Square Bar Of Cane Unloader 205 Dismantling Of Old Rotary Screen Between Mill 1 & Mill 2. 206 Modification In The Mbc Chain As Per New Rbc Belt System. 207 Dismantling Of Complete Rbc Structure. Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 3
6.
Banking and Finance #11329508 AOC
Bids Are invited for 1.5 TR Hiwall type split air conditioners - Supply of 1.5 TR Capacity Hi Wall mounting 5-star rated Inverter Split AC with cordless remote and Copper Condensor Coil. AC Make, Voltas/Bluestar /Daikin /LG/Hitachi ( FOR Banking Hall)Outdoor unit comprising single phase hermetically sealed scroll / rotary compressors, condenser coil with fan & motor, starters / controls / cutouts / relays etc., mountedinside a powder coated sheet metal cabinet of 2mm thick, duly treated for corrosion protection complete, mounted on ribbed rubber pads. AC Make, Voltas/Blue Star/Daikin /LG/Hitachi , 2.0 TR cassette type split air conditioners - Supply of 2.0 TR Cassette type 5 star rated inverter air conditioners with Copper Condensor Coil and refrigerant (R32 or R 410A) Indoor unit ceiling hung comprising cooling coil, evaporator fan with motor, filters, insulated drain pan, drain pump, expansion valve, refrigerant filter drier with codeless remote control unit, etc.Outdoor unit comprising single phase hermetically sealed scroll / rotary compressors, condenser coil with fan & motor, starters / controls / cutouts / relays etc., mountedinside a powder coated sheet metal cabinet of 2mm thick, duly treated for corrosion protection complete, mounted on ribbed rubber pads. AC Make, Voltas/Blue Star/Daikin /LG/Hitachi , Installation charges of the 1.5 TR Split AC - Installation charges of the 1.5 TR Hiwall Split AC including outdoor frame / stands to withstand the full load of outdoor units and making good all the damage. , Installation charges of the 2.0 TR Cassette AC - Installation charges of the 2.0 TR cassette type Split AC including outdoor frame / stands to withstand the full load of outdoor units and making good all the damage. , Copper Pipe - For 1.5 TR TR Hi-Wall type split air conditioners Supply and laying of copper pipes, drain pipes covered with GI pipes wherever necessary copper wiring in GI conduits neatly drawn in professional manner from power points to outdoor / indoor units complete with all necessaries and making good all the damages made to the wall with cement and mortar. , Copper Pipe - For 2.0 TR TR Cassette type split air conditioners Supply and laying of copper pipes, drain pipes covered with GI pipes wherever necessary copper wiring in GI conduits neatly drawn in professional manner from power points to outdoor / indoor units complete with all necessaries and making good all the damages made to the wall with cement and mortar. . , 4 KVA Stabilizer - Supply and Installation of 4 KVA Stabilizer (90V to 290v) for 1.5 TR split Ac , 5 KVA Stabilizer - Supply and Installation of 5 KVA Stabilizer (90V to 290v) for 2.0 TR split Ac , Drain Pipe Additional - Supply and fixing of additional 32mm UPVC drain pipe with insulation Total Quantity : 110
Contract Date: Ref. Documents Contract Value : 4.42 Lakh
Government Departments No of Bidders 8
7.
Civil Aviation #11317932 AOC
Bids Are invited for Title1 - Supply of 1.5 TR Inverter type, 5 star rating as per latest BEE norms, Hiwall, Split airconditioner with rotary compressor operating on refrigerant R-32A/R-410A. The body of indoor unit shall be made of ABS/HIPS/GS condensing unit should be of 100% copper coil & having all safety, air filters, evaporator, condenser, cordless remote, electronic operation control & all accessories supplied with the unit by OEM etc as per manufacturer standards suitable for operation on 230 volts, 50 Hz, Single phase, AC supply, complete as required at site. , Title2 - Supply of 2.0 TR Inverter type, 5 star rating as per latest BEE norms, Hi-wall, Split airconditioner with rotary compressor operating on refrigerant R-32A/R-410A. The body of indoor unit shall be made of ABS/HIPS/GS condensing unit should be of 100% copper coil & having all safety, air filters, evaporator, condenser, cordless remote, electronic operation control & all accessories supplied with the unit by OEM etc as per manufacturer standards suitable for operation on 230 volts, 50 Hz, Single phase, AC supply, complete as required at site. , Title3 - Installation, testing, commissioning of 2.0/1.5 Ton Split inverter A/C i/c supply & fixing of Iron Angle structure stand suitable for outdoor unit, makeup interconnection, top up refrigerent, painting i/c necessary Civil works complete as required, providing suitable size PVC pipe for drawing the gas/drain pipe and wire etc through the concrete/brick wall as required. , Title4 - Supply & fixing of extra copper refrigerant piping for suction and delivery line with all accessories suitable for following capacity ACs i/c Insulation, gas refiling, power & Control cabling etc completed as required.of standard gauge for installation of above units as required at site. , Title5 - Supply & fixing of hard PVC drain piping of proper dia for installation of above units as required at site beyond company provided standard length. , Title6 - Supply, Installing, Testing and Commissioning of 5KVA Voltage Stabilizer suitable for 1.5/2.0 TR split AC units on wall including providing connections etc. as required. (Model-V Guard VGB 500 or equivalent). , Title7 - SITC of Industrial type RO water purifier having capacity minimum 50 LPH Capacity with UV & Membranes, sediment filter, carbon filter, TDS control, water level sensor, 3 prefilter (1 carbon candle and 2 micron filter), auto flush & output water etc as per manufacturers specifications i/c, making inlet and outlet water connections with water cooler complete. Suitable for operation on 230 V, single phase, 50 Hz AC supply. , Title8 - Supply of Water cooler of fully stainless steel body with Thermostate cut- off automatic operation having cooling capacity 40 Ltr. Per hour and storage capacity 80 Ltr per hour, working on 220 V , 50 Hz ,AC supply including automatically controls with temperature, over load protection , water line connection etc. complete as required . , Title9 - Supply of Desert Air cooler (Duct Type) with following minimum specifications as given below.Fan size - 18 Inch & above.Fan speed - 1400rpm/ 3 speed.Water Tank Capacity - 110 Litres & Above - jointless tank.Material of cooler body/sump tank - Galvanized steel sheet (ISI marked to IS 277 latest)Cooling Media - ASPEN/Wood Wool.Cooling area - 500Sqft & Above.Cooling pads - On 4 Sides. , Title10 - Supply of FRP wall support ladder of size 12Feet meeting specifications as provided in the technical specifications of the agreement of the work(Make - Arham/Ladderman/Sumer/Y-access) , Title11 - Supply of FRP wall support ladder of size 20Feet meeting specifications as provided in the technical specifications of the agreement of the work(Make - Arham/Ladderman/Sumer/Y-access) , Title12 - Supply of FRP tiltable telescopic tower ladder of size 32Feet meeting specifications as provided in the technical specifications of the agreement of the work. (Make - Arham/Ladderman/Sumer) Total Quantity : 85
Contract Date: Ref. Documents Contract Value : 12.54 Lakh
Boards / Undertakings / PSU No of Bidders 5
Madhya Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 5.09 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
9.
Communications and Information Technology  #11272066 AOC
Bids Are Invited For General Servicing Of 1.5 Or 2.0 Tr Wac Or Sac Units - General Servicing Of 1.5/2.0 Tr Wac/Sac Units Of Different Make I/C Removing From Existing Position If Reqd., Dismentling Of Faulty Parts, Cleaning The Air Filter, Cleaning The Condesor And Evaporator Coil With Help Of Chemical Solution & Water, Lubrication Of Moving Parts, Complete Checking, Testing And Minor Faults Rectification I/C Replacement Of Knobs, Setting Of Thermostate Etc Complete As Reqd. , Sitc Of 1.5 Tr Resiprocating Type Compressor - Supply Of The 1.5 Tr Capacity New Hermatically Sealed Reciprocating Type Compressor Purchased From The Authorised Dealer I/C Dismentalling Of The Faulty Compressor From Site, To And Fro Transportation Charges For Compressor And I/T/C Of New Compressor In Place Of Faulty Compressor Of Existing Wac/Split Ac Etc Complete As Required. , Sitc Of 2 Tr Resiprocating Type Compressor - Supply Of The 2.0 Tr Capacity New Hermatically Sealed Reciprocating Type Compressor Purchased From The Authorised Dealer I/C Dismentalling Of The Faulty Compressor From Site, To And Fro Transportation Charges For Compressor And I/T/C Of New Compressor In Place Of Faulty Compressor Of Existing Wac/Split Ac Etc Complete As Required. , Sitc Of 1.5 Tr Rotary Type Compressor - Supply Of The 1.5 Tr Capacity New Hermatically Sealed Rotary Type Compressor Purchased From The Authorised Dealer I/C Dismentalling Of The Faulty Compressor From Site, To And Fro Transportation Charges For Compressor And I/T/C Of New Compressor Of Existing Wac/Split Ac Etc Complete As Required. , Charging Of Refrigerant Gas For 1.5 Tr Wac Or Split Ac - Charging Of Refrigerant Gas R-22/ 32 Upto Specified Pressure In 1.5 Tr Capacity Ac Units And Pressure Testing By Nitrogen, Vaccumisation For 2 Hours, Purging With Gas And Testing, Commissioning Of The Ac Unit Etc As Reqd. , Charging Of Refrigerant Gas For 2.0 Tr Wac Or Split Ac - Charging Of Refrigerant Gas R-22/ 32 Upto Specified Pressure In 2.0 Capacity Ac Units And Pressure Testing By Nitrogen, Vaccumisation For 2 Hours, Purging With Gas And Testing, Commissioning Of The Ac Unit Etc As Reqd. , Replacement And Reparing Of Thermostate - Replacement And Reparing Of The Thermostate In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Replacement And Reparing Of Starting Capacitor 80 To 100 Or 120 Mfd - Replacement And Reparing Of The Starting Capacitor (80-100/120 Mfd) In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Replacement And Reparing Of Running Capacitor 36 Or 40 Mfd - Replacement And Reparing Of The Running Capacitor (36/40 Mfd) In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Replacement And Reparing Of Relay For Wac Or Split Ac - Replacement And Reparing Of The Relay For Wac / Split Ac In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Replacement And Reparing Of Wiring Kit For Wac Unit - Replacement And Reparing Of The Wiring Kit For Wac Unit In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Replacement And Reparing Of Selector Switch For Wac Unit - Replacement And Reparing Of The Selector Switch For Wac Unit In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Rewinding Of Condensor Or Blower Motor For Ac Unit Incuding Replacement Of Bush - Rewinding Of Condensor/Blower Motor For Ac Unit I/C Replacement Of Bush In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Replacement And Reparing Of Blower Fan Motor Capacitor 4 Or 6 Mfd - Replacement And Reparing Of The Blower Fan Motor Capacitor 4/6 Mfd In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Repairing Of Pcb For Wac Or Split Remote Control Unit - Repairing Of Pcb For Wac/Split Remote Control Unit In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Replacement Of Faulty Or Irrepairable Pcb For 1.5Tr Split Ac Unit - Replacement Of Faulty / Irrepairable Pcb For 1.5Tr Split Ac Unit In The Existing Ac Units In Place Of Fulty, Fixing, The New Item And Testing, Connection Etc. Complete As Reqd. , Sitc Of Blower Fan Motor For 1.5 Or 2 Tr Window Or Split Ac - Sitc Of Blower Fan Motor For 1.5/2 Tr Window/Split Ac Unit In Lieu Of Damaged I/C Connection Etc As Reqd. , Supplying, Installation Of Condensor Or Blower Fan Blade - Supplying, Installation Of Condensor / Blower Fan Blade Same As Per Existing Pvc / Metal Blade In Lieu Of Damaged I/C Fixing The Same Etc As Req. , Top Up Or Additional Charging Of R-22 Or 32 Gas - Provision Of Top Up / Additional Charging Of R-22/32 Gas Upto Specified Pressue In Existing Window Ac / Split Ac Units I/C Flushing, Gas Charging, Testing Etc Complete As Reqd. , Supplying And Drawing Of 3X2.5 Sq. Mm Frls Pvc Copper Single Core Cable - Supplying And Drawing 3X2.5 Sq. Mm Size Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Drawing Of 6X2.5 Sq. Mm Frls Pvc Copper Single Core Cable - Supplying And Drawing 6X2.5 Sq. Mm Size Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Fixing Of 20Mm Medium Class Pvc Conduit - Supplying And Fixing Of 20Mm Size Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supplying And Fixing Of 25Mm Medium Class Pvc Conduit - Supplying And Fixing Of 25 Mm Size Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supplying And Fixing Dp Sheet Steel Enclosure With 25 Or 32Amps 240 Volts C Curve Dp Mcb - Supplying And Fixing Dp Sheet Steel Enclosure On Surface/ Recess Along With 25/32Amps 240 Volts C Curve Dp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing Of 5 A To 32 A Rating, 240 Or 415 V, 10 Ka, C Curve, Spn Mcb - Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Single Pole And Neutral Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing Of 3X2.5 Sq. Mm Pvc Frls Round Sheathed Multi Core Bright Annealed Bare Copper Cable - Supplying And Fixing Of 3X2.5 Sq. Mm Pvc Insulated And Frls Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cable For Voltage Grade Up To 1100 Volts As Per Is 694-1990 I/C Fixing On Wall With Suitable Clamp/Saddle Etc. Complete As Reqd. , Dismentalling Of Existing 1.5 Or 2.0 Tr Capacity Window Or Split Ac Units - Dismentalling Of Existing 1.5 / 2.0 Tr Capacity Window / Split Ac Units Along With Indoor / Outdoor Units & All Other Existing Accessories Including Disconnection Of Electrical Connection, Copper Piping, Drain Piping , Stand Etc. From Existing Location Of Te / Bts Site Under Ssa Concerned And Reparing Of Any Damage During Dismentling By Making Good The Same Etc. Complete As Reqd. , Transportation Of Existing 1.5 Or 2.0 Tr Capacity Window Or Split Ac Units - Transportation Of Existing 1.5 / 2.0 Tr Capacity Window / Split Ac Units Along With All Accessories Etc From Te / Bts Site Of Ssa Under Ba To Store / Any Place In Same Ssa As Directed By Engg. In Charge By Transport By Truck / Loading Vehicle I/C Loading, Unloading & Safe Handling Etc.Complete As Reqd. , Itc Of 1.5 Or 2.0 Tr Capacity Split Ac Units - Installation Of 1.5 / 2.0 Tr Capacity Split Ac Units With Indoor And Outdoor Unit I/C Fixing The Refrigerant Piping With Insulation, Cutting, Brazing, Laying The Cable Along With The Piping Connections, Repairing The Minor Leakages Of The Complete System I/C Testing, Commissioning Of Split Type Ac Unit Etc. Complete As Reqd. , Pdg And Fixing Of 1 By 4 Inch Dia Copper Refrigerant Piping - Pdg And Fixing 1/4 Inch Dia Copper Refrigerant Piping I/C Covering Of Copper Piping With Polystyrene Insulation I/C Cutting, Brazing, Jointing, Bends, Sockets Etc As Reqd. , Pdg And Fixing Of 5 By 8 Inch Dia Copper Refrigerant Piping - Pdg And Fixing 5/8 Inch Dia Copper Refrigerant Piping I/C Covering Of Copper Piping With Polystyrene Insulation I/C Cutting, Brazing, Jointing, Bends, Sockets Etc As Reqd. , Providing And Fixing 12 Mm Thick Particle Board - P/F 12 Mm Thick Particle Board On Surface Of Wall For Fixing The Indoor Unit Of Split Type Ac Unit Or Fixing / Covering The Extra Space Etc. With The Help Of Screw Complete Etc. As Reqd , Supplying And Fixing Suitable Size Ms Stand For Split Type Ac Outdoor Unit - S/F Suitable Size Ms Stand For Placement Of Split Type Ac Outdoor Unit Made Out Of 16 Gauge Powder Coated Ms Sheet I/C Fixing With Help Of 4 Nos. Fasteners For Grouting On Wall / Floor, Etc. Complete As Required. , Providing And Fixing 20 Mm Dia Heavy Duty Pvc Pipe For Drainage Purpose Of Ac Unit Including Connection Testing Etc As Required. - Providing And Fixing 20 Mm Dia Heavy Duty Pvc Pipe For Drainage Purpose Of Ac Unit I/C Connection, Testing Etc As Required. , Sitc Of Ac Smart Controller For 02 Nos. Ac Cyclic Operation For 4 Or 8 Hrs Duration Suitable For Working On Single Phase Ac Supply System - Sitc Of Ac Smart Controller For 02 Nos. Ac Cyclic Operation For 4/8 Hrs Duration , Suitable For Working On Single Phase Ac Supply System, Having Under Voltage & Over Voltage Tripping Facility And Selector Switch For Operation Of Cp 1/ Cp 2/ Auto Mode Etc Complete As Reqd. (Make- Bsc Or Similar Superior Make) Total Quantity : 1135
Contract Date: Ref. Documents Contract Value : 7.74 Lakh
Government Departments No of Bidders 5
11.
Educational and Research Institute #11256822 Price Bid
Supply Of Equipments , Department Of Geography , Mirror Stereoscope ( With 4X Binocular, Export Quality ) , Satellite Image ( Liss 3, Irs ) , Streak Plate ( 5X 3 ) , Rocks And Minerals ( Size :M=More Than 3 ) , Magnifying Glass , Handheld Gps ( Tft, 2.2 Inch, Touchscreen, 240X320 Pixels, Usb, Gps Accuracy-5 ) , Soi Toposheets ( Mountain Region With R.F. 1:50000 ) , Soi Toposheets ( Pleateu Region With R.F. 1:50000 ) , Gi Wired Globe For Map Projection , Transit Theodolite With All Accessories ( Allumunium Tripod, Plumb Bob, U-Fork Overall Sturdy And Durable Quality ) , Dumpy Level With All Accessories ( Allumunium Tripod, Plumb Bob, U-Fork Overall Sturdy And Durable Quality ) , Department Of Chemistry , Uv Inspection Cabinet [ Single Tubes 144 ( Uv Inspection Cabinet, Size / Dimension- 15”X12”X10 ) ] , Water Bath Rectangular ( Single Walled, Cap. 15 Ltr, 12 Holes, Dimensions: ( Wxhxd ) 355 X2405x 100 Mm ) , Microwave Oven [ 23 L Ceramic Enamel Cavity ( Power Consumption: 1150 W, 489X275x338 Mm ] Display Type: Led , Micropipettes ( 100-1000 Microlitre Weight: 2 Lbs Dimensions: 11.5 × 4 × 2 In ) , Digital Weighing Balance [ 100 Gm To 0.001Mg ] , Pre Coated Tlc , Whatmantm 41 [ Ashless, Circles, 125 Mm ] , Refrigetor [ 265 L , Double Door ] , Teflon Coated Magnetic Bar [ L 20 Mm Diam 6 Mm ] , Department Of Microbiology , Biosafety Cabinet , Distillation Unit , Autoclave , Freezer-20°C , Transilluminat Or , Hotair Oven , Refrigerated Microfuge Centrifuge , Dry Bath With Heating Block , Department Of Botany , Laminar Air Flow , Centrifuge , Uv-Transilluminator , Bod Incubator , Water Bath , Refrigerator , Ph Meter , Deep Freezer , Compound Microscope With Light Attachment , Muffle Farnese , Hot Air Oven , Digital Balance , Uv-Vis Spectrophotometer , Distillation Plant Double , Digital Magnetic Stirrer Hot Plate , Incubator Shaker , Gel Shaker , Incubator , Rotary Evaporator , Lux Meter , Dehumidifier , Steel Forcep ( 10 And 12 Inches ) , Hemocytometer , Chi Square Bead Sets , Slides Of Human Genetic Disorder , Soil Thermometer , Maximum And Minimum Thermometer , Anemometer , Hygrometer , Rain Gauge , Ph Paper , Micropipette , Tds Meter , Department Of Zoology , Multiparameter Portable Water Analyser , Upright Freezer ( -20°C ) , Trinocular Stereozoom Microscope ( 10X& 50X ) With Both Of Transmitted Incident Light And Microscopy Camera. , Trinocularturret Phase Contrast Microscope With Dedicated ‘Digi-530’ Hdmi Camera And Digicam Live Image Preview, Calibration, Measurement With Scale Bar Image Analysis Software. , Distillation Plant Double , Dehumidifier , Microtome , Refrigerator , Mini Submarine Elecrophoresis Unit , Vertical Gel Electrophoresis Unit , Hameocytometer , Sahli’S Hemoglobinometer , Sedgewicks Rafter , Insect Showcase Cabinate , Light Trap For Moth With Mercury Bulb. , Insect Collecting Net , Portable Hand Held Ph Meter , Ph Meter
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 19
West Bengal View Result →
12.
Health and Family Welfare #11254887 AOC
Bids Are Invited For Condenser Blade - Material In Plastic Suitable For Split Ac 2 Ton Size 17Point5 , 4 Mfd Capacitor - Capacity Type 4 Mfd Material Type Copper Shape Type Round Connection Type Wired , Samsung Timer - Body Material In Plastic Voltage 120V In Refrigerator Samsung Timing Approx 9 Hours 40 Min Comp 12 Min Heater Product Capacity Above 250 Litres Of Double Door Refrigerator , White Wrapping Tape - Adhesive - Rubber Base Material - Pvc Type - Non Adhesive Suitable For Copper Clubbing Each Nos 15 Meters , Teflon Tapes - Material Poly Tetra Fluoro Ethylene Features Heat Resistance Each Nos 10 Meters , Cello Tape 2 Black - Colour Black Material Biaxially Oriented Polypropylene Uses Wrapping Of Ac Copper Pipes And Packing Purpose , Cotton Waste - Colour White , Danfoss Relay Set 20 Deep Freezer - Connector Type Through Hole Contact Type Normally Open Mounting Type Din Rail Mount Operation Mode Automatic , 80 By 100 Mfd Capacitor - Capacity 80 By 100 Mfd Voltage 275 Vac 50 Hz , Minus 20 Deep Freezer Square Type - Fan Type Square Voltage 220 V, 50 Hz Wattage 65 Watts Heat Sink Material Copper , Pin Remover Charging - Item Is Valve Core Remover Installer Material Type Copper Service Ports Is 1 By 4Inch And 5 By 16 Inch Sae Female Bypass Ports Is 1 By 4 Inch Sae Male , Thermostat Minus20 - Model Wpf 20 250 V 4 Of 6A 50 Or 60 Hz Suitable For Minus20 Deep Freezer Vertical , Relay Danfoss - 103N0021 25Ohm 463 220V 240V , Capacitor 4 Mfd - Capacity 4Mfd 280 V Ac 10000H Ki 8 50 Or 60 Hz Material Shape Round Type , Condenser Fan Blade For 2 Ton Llyod Ac - Material Plastic Suitable For Split Ac 2 Ton Size 17 Point 5 , Pinch Pliers - Color Multicolor Primary Material Ss , T Handle 10Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , T Handle 12Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , Sand Paper - Color Brown 80 Grit , 1 By 4Inch Ratchet - 3 By 16 Inch And 1By4 Inch Square X 1By2 Inch And 9By16 Inch Hex Ratcheting Refrigeration Wrench , Refrigerant Recovery Plier - 1By4 Sae Interface Material Ss , Allen Key Set In Inches - Item 10 Pack Of Allen Key Material High Grade Alloy , Cold Room Evaporator Fans - Make Hi Cool Model 4E 450S 230 V 50 Hz 1Point15a 155 Or 250W 1350 R By Min Axial Fan Motor Warranty 1 Year , 8 Mfd Capacitor - Body Material Metal, Connection Type Wired Voltage 440 Vac 50 Hz , Nose Pliers - Make Taparia Material Carbon Steel Handle Material Plastic Rubber Steel , Wire Cutter - Harden 7Inch Professional Electric Wire Cutter Stripper Made Of Zinc Alloy And Supports Wire Diameter Range 4 Mm Features Cut And Stripping Line Two-In-One Product Combined With Cut Line And Stripping Two-In-One Powerful And Durable Ergonomic Designed Handle Multipurpose Wire Stripper Under The Tangent Mouth Design Tangent Convenient Sharp And Durable Save Labor Force Spring Design Mached With A Length Of 47Mm Gun Mouth Convenient And Quick Efficient Adjustable Knob Wire Stripping Force Can Be Adjusted By The Knob Size To Avoid Excessive Damage To The Wire And Cable Ergonomic Handle According To The Human Body Design Feel Comfortable And Durable , Charging Line R32 - Make Value Material Brass 3Pc Charging Hose Suitable For R32 Gas Charging , Two Way Manifold Gauge With Box And Hose - Make Value Model No Vmg2 R410a 02 Pressure Range 30 500Psi Low 0 800Psi High Hose Red And Blue And Yellow 1By4inch 1By4inch 3X1pc , 46 Pcs Set - Make Stanly 46Pcs 1By4 Inch Drive Box End Socket Set Metric Ratchet Wrench Set With 4 To 14Mm Cr V Sockets S2 Bits Extension Bars Material Ss , Cylinder Key - Material Ss , Tourch For Butane Gas Cylinder - Make Clix Nozel Single , Swaging Tools - Swage For 1By4inch 5By16inch 3By8inch 1Byinch 5By8inch 3By4inch 7By8inch , Rough File With Handle - Make J K Thickness 3 Mm Material High Carbon Steel Width 12 Mm Length 100 Mm , Double End Spanner Set 6X32 Mm - Make Taparia Size 6Mm To 32 Mm Type End Type , T Set 13Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , T Set 14Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , Drain Line Spring - Length 30 Meters Material Steel Color Silver Packaging Size 30 Meters , Single Gauge High Side - Make Value Model Vmg 1S H Pressure 0To800 Psig Material Brass , Measuring Tape 5 Meters - Make Stanly Coating Tylon Blade Lengh 5 Meters Body Material Rugged Rubber , Expansion Valve For Cold Room - Make Model Erse 4C Body Machined Brass Bar Seat Brass Port Machined In Body Pin Stainless Steel Pushrod Stainless Steel Type Of Joints Knife Edge To Metal Connections Odf Copper Fittings Silver Soldered To Body Inlet Strainer No Strainer Suitable For R 22 Refrigerant , Condenser Motor - Make Llyod Model Ydk68 6Bl Kw68b Rpm 900 Rotation Ccw , Condenser Blade - Material Plastic Suitable For Split Ac 1Point5 Ton Size 16Inch , Capacitor 3 Mfd - Body Material Plastick Connection Type Wired Voltage 440 Vac 50 Hz Capacity 3Mfd Shape Round , Digital Temp Meter - Make Hitcahi Model No Hd 306 Humidity Range 0 To 100 Rh Temperature Range Minus20c To Plus200c) Warranty 1 Year , Samsung Heater - Uses Refrigerator Heater Size 14 , Timer - Model Td20 Csa Power 220V 50 Hz Number Of Terminals 4 , Condenser Fan Blade - Material Plastic Suitable For Split Ac 2 Ton Size 17Point5inch , Valve 3By8inch Hand Shut Off - One Side 1By4inch Male Flare Other Side 3By8inch Male Flare Material Fully Brass With Handle , Cylinder Valves - Model Cga 320 Type Handle Material Brass Outlet 1/4Inch , Condenser Motor - Ge Motor Cpn 2Az0 10To 090Coma 920 Rpm Cwse 1By5 Hp , Fan Blade - Material Aluminum Suitable For The Ge Motor Cpnto2az0 To10to090 Size 19Inch , Hand Cutter Blade Iron - Size 4Inch 107X1point0x16 Mm 4Inchx3by64inchx5by8inch 15300 Rpm Double Net Max Speed 80 Ms Metal Cutting Wheels , Adjustable Wrench 6Inch - Make Taparia With Rubber Grip Size 6Inch , Adjustable Wrench 8Inch - Make Taparia With Rubber Grip Size 8Inch , Adjustable Wrench 12Inch - Make Taparia With Rubber Grip Size 12Inch , Allenkey Set Mm - Item 10 Pack Of Allen Key Set Material High Grade Alloy , Flaring Tools Set With Box - 1 X Flaring Tool 1 X Inch Pipe Clamp 1 Xmetric Pipe Clamp 1 X Pipe Cutter 1 X Pipe Deburring Tool Material Ss , Smooth File With Handle - Make J K Size 10Inch Width 25 Mm Thickness 5Point8 Mm , R22 Charging Line - Make Value Material Brass 3Pc Charging Hose Suitable For R22 Gas Charging , T Handle Only 1By4inch - Handle Length 12Inch Material Ss , Multitec Screw Driver - Ph1 And S5 Ph0 And S3 In Reversible Configuration Chrome Plated Finish , T Handle 8Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 8Inch , T Handle 11Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 11Inch , T Handle 13Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 13Inch , Tube Cutter - Make Value Model Vtc-42 Tube Diameter 1By4inch 1 5By8inch 6 To42 Mm , Flare Nut 3By4inch - Material Brass Size 3By4inch , Square Type Condenser Fan Motor - Power 230 V Watts 36W Rpm 1500 Rpm With Stand And Blade , Tong Tester With Probes And Leather Cover - Make Fluke Model 302 Type Digital Ac Clamp Meter Jaw Opening Size 30 Mm Voltage Range Dc 0To600v Current Range Ac 0To400 A Voltage Range Ac 0To600 V Power 2 Aa Batteries 1Point5v Resistance Range 4000 Ohm Warranty 1 Year , Screw Driver Long - Make Taparia Model 931 Type Long Handle Tip Type Phillips Usage Household Product Type Screwdriver , Hammer With Wooden Handle - Make Taparia Made From High Grade Chrome Vanadium Steel Is 841 1983 Weight 500 G Type Ball Pein , Cutting Plier - Maketaparia Model 1621To8or1621to8n Combination Pliers , Tube Cutter Small - Cutter Size 1By8inch To 5By8inch Material Ss , Hexa Frame With Blade - Make Stanly , Evaporator Fan Motor For Lg Refrigerator - Make Lg Electronics Model Rda082e03 Rohs Pno Eau41681402 Ac230v Or 50 Hz 0 Point 20 By 1300T Refrigerator Model No Gl 365Yvqg5 Dsuzebn , Condenser Copper Coil Make Llyod - Copper Condenser Coil For The Llyod 1Point5 Ton Ac Size 20X30 Inch , Filter - Material Copper Type 2 Way , Single Pressure Gauge High Side500psi - Make Wikai Pressure Range 0To800 Psig Material Brass , Gauge Value - Make Value Model Vmg1slr32 Pressure 0To350 Psig Material Brass , Danfos 20 Relay Olp Set - Connector Type Through Hole Contact Type Normally Open Mounting Type Din Rail Mount Operation Mode Automatic , Try Square Set - Size 6Coma8coma10 Inch Material Carbon Steel Blade 90 Degree Heavy Duty Right Angle Ruler , Valve Core Removal Tool - Item Valve Core Remover Installer Material Copper Service Ports 1By4 Inch And 5By16inch Sae Female Bypass Ports 1By4inch Sae Male , Digital Vernier Callipers With Batteries - Material Stainless Steel Measurement Accuracy Plus Or Minus 1Percent , Siron Soldering Iron Set - Make Siron Model Dss60 Voltage 24V Power 60W Temperature Range 150 To 480 Degree Centigrade , Soldering Wire - Package Spool Type Wire Solder Wire Gauge 24 And 25 Awg Process Leaded Weight 500G , Compressor Cable Kit - Cable Feature Heat Resistance Features Both Side Clips Each Wire 2Point 5 Sq Mm Copper Cable , Handset Valve 1By4inch - One End 1By4inch Sae Female Flare The Other End 1By2 Acme Male , Cuppler - Size 1By4inch And 3By16inch Material Ss , 24 Socket Wrench Set Ratchet - Make Stanley Piece 1By2 Inch Drive Sliding Tee 1 Piece 1By2 Inch Drive Universal Joint 18 Pieces 1By2 Inch Drive 6 Point Sockets 10 Mm 11 Mm 12 Mm 13 Mm 14 Mm 15 Mm 16 Mm 17 Mm 18 Mm 19 Mm 20 Mm 21 Mm 22 Mm 23 Mm 24 Mm 27 Mm 30 Mm 32 Mm Box Included 1 Piece 1By2 Inch P9 Ratchet 2 Pieces 1By2 Inch Drive Extensions 130 Mm And 250 Mm 1 Piece 12 Inch Drive Spark Plug Socket 21 Mm , Pin Valve - Valve Type Pin Valve Exterior Finish Copper Outlet Connection Flange Material Copper 1 Packet 10 Nos , Charging Line Handle - Air Conditioner Refrigerant Angled Ball Valve 1By4inch Sae For R410a R134a R12 R22 Ac Hvac With R410a Adapter R134a Refrigerant Adapter Valve Core Thimble Remover For Mini Split System Material Brass Inlet Connection Size 0Point25 Inches Inlet Connection Type Npt Outlet Connection Type Sae Number Of Ports 3 Outlet Connection Size 0Point25 Inches Valve Type Ball Valve , Capacitor 50 Mfd - Capacity 50 Mfd Material Non Pcb Shape Round Mounting Type Internal , 3 Way 30 Amps Connector - Current Ratings 30 Amps Connector Type Screw Material Bakelite High Current Capacity , Ss Tank Nipple 1By2inch - Material Brass Thread Size 15 Mm Item Dimension Lxwxh 15 X10 X 5 Cm , Pvc Connection Pipe 1 By 2 Inch - 24 Long Brasstail Nut Connection Pipe With White Pvc 15Mm 1By2 Inch Hosepipe 60Cm , Ro Water Purifier T Type Tap - Colour Blue For The Ro Water And Material In Plastick , Ro Water Purifier Tap Tank Kent Type - Color Blue Material Plastick , Charging Line Rubber - High Quality Grade Rubber 1 Packet Equalto 50 Nos , Pipe Wrench 16Inch - Make Taparia Model 1273To12 , Bearings - 6201Z , Oil Seal - 25 47 7 A 1 Oil Seal Rajson Enterprises , Ss Breazing Roads - World Class Welding Electrodes Super Stainless Steel 308L Size 3Point15 X 350 Mm , Bluestar Indoor Blower For 1Point5 Ton Sac - Length 25Point3 Inch , Line Tester - Make Taparia Model 813 , Screwdriver Small - Make Multitec Model R6100i Type Insulated Shank Size Hexagon 6 Mm Length Of Bit 150Mm , Screwdriver Large - Make Multitec Model R6250i Type Insulated Shank Size Hexagon 6 Mm Length Of Bit 300Mm , Handle T - Make Taparia Model Takm9 , Jet Pump Handle Small - Hoselength 8M And Waterflow Rateof 8 Lperh Portable Maxium Pressure 300Bar , Araldite 500Gms - Weight For 180G The Each , Double Ended Ring Spanner Set - Make For The Taparia Size 6Mm To 32 Mm Type Ring Type , Single Guage Low Pressure For Vaccume - Make Value Model Vmg 1 S L Pressure 0To350 Psig Material Brass Suitable For R22 Refrigerant , T Type Handle Spanner Set - This Set Includes Seven Metric Sizes 8 10 12 13 14 17 And 19 Mm T Handles , Continuity Tester Compressor Check - Power Source Battery Style Digital Sound Yes Beep , Servicing Covers - Material Polyvinyl Chloride Color Blue Or Black Water Resistant Yes , Compressor For 345 Liters Refrigerator - Make Samsung Or Equivalent Model Number Mk172k S1u Refrigerant R134a Phase Single Type Rotary Warranty 1 Year , Electrical Relay - Relay With 5 Mfd Capacitor , Compressor For Minus20 Deep Freezer 320 Liters - Make Voltas Or Equivalent Model Number F60nl Refrigerant R290 Phase Single Warranty 1 Year , Compressor For 165 Liters Bpl Make Refrigerator - Makebpl Or Equivalent Model Number Sl19j-5 Refrigerant R12r134a Phase Single Warranty 1 Year , Compressor For Minus20 Deep Freezer 350 Liters - Make Danfoss Or Equi Model Nl9f And Refrigerant R134a Phasesingle And Warranty 1 Year , Filter Drier Pencil Type - Material Copper Type 2 Way For 134A Refrigerant For Minus20 Deep Freezer , Compressor For -20 Deep Freezer 500 Liters - Make Danfos Or Equivalent Model Numbersc12g Refrigerant R134a Phase Single Warranty 1 Year , Compressor For 1Point5 Tr Split Ac Rotary Type - Make Sci Or Equivalent Model Number- Rh313vamt Refrigerant R22 Phase Single Type Rotary Warranty 1 Year , Side Dummy Nuts 5By8inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 5By8inch , Side Dummy Nuts 1By2inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 1By2inch , Side Dummy Nuts 1By4inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 1By4inch , Side Dummy Nuts 3By8inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 3By8inch , Dummy Nuts 1By4inch - Hexagonal Brass Forged 1By4inch Flare Dead Nut , Ductable Split Ac Indoor Blower - Size 226X155 Suitable For 5Point5 Tr Duct Able Ac , Rubber Bushes - Type Star , Minus20 Deep Freezer Compressor - Make Embraco Or Equivalent Model Nek2150gk Warranty 1 Year , Drier Cum Filter - Make Danfoss Model 023Z5004 Size 1By4inch Brazing Type , Refrigerant R 600A - Make Godrej Of Skf Specific Name R600a Gas Type Hydrocarbon Packaging Size 200G , Hand Shut Valve For R600a Portable Cylinder - Material Brass R600a Gas Can Tap Valve With Handle Uses For Portable Gas Cylinder , Water Pipe Pvc - Flexible Water Pipe Pvc Durable Flexible Ant Kink , Acetylene Cylinder Regulator - P1 Equalto 30 Bar P2 Equalto 4 Bar Q1 Equalto 1Point9 M Per H Two Stage Gas Regulator Pressure , Oxygen Cylinder Regulator - P1 Equalto 100 Bar P2 Equalto12 Bar Q1 Equalto 30 M Per H Two Stage Gas Regulator Pressure , Hose Pipe For Acetylene - Color Red Material Rubber Brass Iso Standards , Hose Pipe For Oxygen - Color Red Material Rubber Brass Iso Standards , Torch For Oxygen Acetylene Cylinder - Uses Brazing Of R And Abyc Equipments With Iso Standards , Clamps For Hose Pipes - Size 1By2 Inchs Material Brass Uses For Hose Pipe Clamping , Hand Hacksaw Bladed - 14Inchx1inch 0 Point 050 , Axial Fan Motor For Hitachi 16Point5 Ton Ac - Make Hicool Model 4D 630S Size 25Inch 630Mm Voltage 415 Vac Power 815 Watt Current 1Point6 Amps Speed 1320 Rpm Air Direction Suction Warranty 1 Year , Compressor For Ice Machine 120 Kg Per Hr Production - Make Cubigel Or Equivalent Model No Gp14tb Refrigerant R134a Power 3By8 Hp , Filter Cum Drier - Type Brazing Size 1 By 4Inch , Compressor For Bluestar Split Ac 1Point5 Ton - Make Mistubishi Ics Or Equivalent Model Rh313vadt Refrigerant R22 Capacity 1Point5 Ton , Capacitor 45 Mfd - Capacity 45 Mfd Material Non Pcb Shape Round Mounting Type Internal , Capillary Tube Gauge - Make Refco For Measuring Capillary Inside Diameters , Soldering Liquid Flux - Uses For Stainless Steel & Multi Metals Soldering Packaging Size 100Gm , Blower For Lloyd Make Split Ac 1Point5 Ton - Size 34 1By4inch Or 87 1By2inch Cm Suitable For 1Point5 Ton Lloyd Split Abyc , Pvc Pipe 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Bends 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Pipe 1Inch - Size 1 Inch Material Pvc Conduit Color Grey , Pvc Bend 1Inch - Size 1Inch Material Pvc Conduit Color Grey , Clamps 3By4inch - Material Upvc Size 3Byinch 1 Packet 100 Nos , Clamps 1Inch - Material Upvc Size 3By4inch 1 Packet Equalto 100 Nos , Pvc T Joint 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Solvent - Hp 901 Pvc 50 Ml Packaging Size 50 Ml , Cutting Machine Blade - 105 Mm 105X1x16 , Vc T Joint 1Inch - Psize 1 Inch Material Pvc Conduit Color Grey Total Quantity : 655
Contract Date: Ref. Documents Contract Value : 10.10 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 1
15.
Coal and Mines #11239075 AOC
Bids Are invited for Red Dot Ac Spares For Hemms Compressor, Part No. Rd5107250p , Condansor, Part No. Rd46847op , Evaporator Core Assy, Part No. Rd21370o , Receiver Drier, Part No. Rd570621p , Thermostat, Part No. Rd442724 , Expansion Valve, Part No. Rd56868op , Valve, Part No. Rd58076op , Binary Switch, Part No. Rd54640op , Relay 24V, Part No. Rd56693o , Relay, Part No. Rd53646op , Motor Blower Assy 24V, Part No. Rd585831p , Blower Motor 24V, Part No. Rd538605p , Switch Binary, Part No. Rd595770p , Fan Motor Assy 24V, Part No. Rd586276p , Reciver Drier, Part No. Rd5109440p , Thermostat, Part No. Rd5412536 , Blower Motor Assly., Part No. Rd5129331p , Hose No 10, Part No. Rd5501060op , Hose 50 Ft, Part No. Rd55008600p , Hose 50 Ft, Part No. Rd55006600p , No. 6 Male Straight, Part No. Rd578050p , No.6 Female 90 Dig, Part No. Rd569450p , No.8 Female 90 Dig Charging Put, Part No. Rd572250p , No.8 Female 90 Dig, Part No. Rd568400p , No.10 Male Straight, Part No. Rd569510p , No.10 Female 90 Dig Charging Port, Part No. Rd572310p , Evaporator Core, Part No. Rd3202600p , Condenser, Part No. Rd453780p , Evaporator Assembly, Part No. Rd234130p , Expansion Valve, Part No. Rd595130p , Tube No.6 Receiver Drier - Cond, Part No. Rd234180p , Receiver Drier, Part No. Rd594191p , Tube No.6 Condenser, Part No. Rd234190p , Tube Assembly - Inlet Cond, Part No. Rd454530p , Switch Rotary 3 Speed, Part No. Rd5109340p , Switch Rocker Black, Part No. Rd589670p , Filter Recirc, Part No. Rd590771p , Coil Condenser, Part No. Rd476320 , Core Combi Htr-Evap, Part No. Rd3213410 , Cover, Part No. Rd451210p , Switch Rotary 3 Speed, Part No. Rd5109340p , Filter Recirc, Part No. Rd590771p , Motor 24V, Part No. Rd551212p , Coil Condenser, Part No. Rd476320 , Core Combi Htr Evaprator R-9750, Part No. Rd3213410p , Fan Motor Assy 10 In Dia 24 V, Part No. Rd587031 , Motor-Double Blower, 24 V, Part No. Rd588380p , Filter Foil Framed, Part No. Rd3212640p , Reciver Drier, Part No. Rd5109440p , Switch Binary, Part No. Rd595770p , 90 Female O Ring, Part No. Rd576410p , Ftg No. 6 Male 90 Deg, Part No. Rd569440p , Hose No.8,Nylon Barrier, Part No. Rd550080p , Hose No.6,Nylon Barrier, Part No. Rd550060p Total Quantity : 390
Contract Date: Ref. Documents Contract Value : 29.86 Lakh
Boards / Undertakings / PSU No of Bidders 2
18.
Educational and Research Institute #11182295 AOC
Bids Are invited for Calibration Beaker - 100 Ml , Beaker - 150 Ml , Beaker - 250 Ml , Beaker - 500 Ml , Beaker Plastic - 100 Ml , Volumetric Flask - 50 Ml , Volumetric Flask - 100 Ml , Volumetric Flask - 200 Ml , Volumetric Flask - 250 Ml , Volumetric Flask - 500 Ml , Volumetric Flask - 1000 Ml , Measuring Cylinder - 5 Ml , Measuring Cylinder - 10 Ml , Measuring Cylinder - 25 Ml , Measuring Cylinder - 50 Ml , Measuring Cylinder - 100 Ml , Measuring Cylinder - 500 Ml , Measuring Cylinder - 1000 Ml , Pipette - 1 Ml , Pipette - 2 Ml , Pipette - 5 Ml , Pipette - 10 Ml , Pipette - 25 Ml , Burette - 50 Ml , Thermometer - 10 To 100 Degrees , Weight Box No.1 - 1 Mg To 100 G , Weight Box No.2 - 1 Mg To 200 Mg , Dry Bulb And Wet Bulb Thermometer - 1 Deg C To 50 Deg C , Micropipette - 5 To 50 Ul , Micropipette - 1 To 5 Ml , Micropipette - 0.1 Ml To 1.0 Ml , Electronic Micro Balance - ( 0.001 Mg To 2 G) , Analytical Balance - ( 2 Mg To 420G) , Analytical Balance - ( 2 Mg To 210G) , Analytical Balance - (1 Mg To 510G) , Analytical Balance - (1 Mg To 420G) , Turbidity Meter - (0 To 1000 Ntu) , Microlit E Burette - 0 To 50 Ml , Hanna Do Meter - Calibration Of Hanna Do Meter , Water Testing Kit Labtronics - Ph, Do , Ec , Salinity , Hydrometer - (5 To 60) , Top Loading Calibrator - Calibration To Top Loading Calibrator , Hanna Ph Meter - Calibration Of Hanna Ph Meter , Table Top Ph Meter - Calibration Of Table Top Ph Meter , Dry Gas Meter - Calibration To Dry Gas Meter , Hanna Tds Meter - Calibration Of Hanna Tds Meter , Hot Air Oven Digital Temperature Controller - Temp Range 50 Deg C To 150 Deg C , Water Bath Digital Temperature Controller - Temp Range 30 Deg C To 110 Deg C , Rotary Evaporator Digital Temperature Controller - Temp Range 50 To 150 Deg. C , Noise Level Meter - 30Db(A) To 130 Db(A) , Cod Digestor - Temperature Range 100Deg C To 150Degc, , Bod Incubator - Temperature Range 10Deg C To 30Deg C , Hot Plate - Temperature Range , Top Loading Orifice Calibrator - Calibration Top Loading Orifice Calibrator , Muffle Furnace - Temperature Range , Autoclave - Pressure Gauge , Magnetic Stirrer With Hot Plate - Temperature & Rpm , Deep Freezers - (Minus)4 Deg C To 4 Deg C , Digital Conductivity Meter - At 1413 Us/Cm , Lux Meter - Calibration Of Lux Meter , Stop Watch - Timer 0 Min To 180 Min , Noise Level Calibrator - 94 /115 Db(A) Total Quantity : 136
Contract Date: Ref. Documents Contract Value : 70,530
Government Departments No of Bidders 3
19.
Communications and Information Technology  #11153936 AOC
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Commercial; Hvac; Service Provider - Replacement Of Outdoor Condenser Unit Fan Motor Suitable For Existing 7Tr Package Ac Units Suitable For Operation On 230V 1 Phase Ac Supply Including Transportation Dismantling The Faulty Fan Motor Fixing Connecting With Existing Wires Testing And Commissioning Etc As Required (Outdoor Fan Motor For Unit Sstp-1, Pcm-1) , Replacing And Fixing Of Blower Motor Suitable For 7Tr Pac Unit Including Dismantling The Faulty Motor, Testing And Commissioning Etc, Complete As Required (Unit Pcm-1, Sstp-3) (M/S Hindustan Or Similar Superior Make Suitable For Existing Pac) , Conducting Standing Pressure Test Of 7Tr Pac/Hpac Unit By Charging Nitrogen Gas In To The System For Minimum 24 Hours Leakage Arresting In The System Brazing And Vaccumizing With 2 Stage Rotary Pump Supply Of Refrigerant Gas And Charging With R410/407/R22 Or Suitable Gas For Achieving The Required Suction Pressure To Deliver Required Tonnage Testing And Commissioning Etc As Required.(Unit Pcm-4, Pcm-7, Sstp-5, Sstp-6, Ip Tax-1, Ip Tax-4 & Ip Tax-6) , Supplying And Topping Up Of Refrigerant Gas With R410/407/R22 To Suit The Existing Pac/Hpac Units, For Achieving The Required Suction Pressure To Deliver Required Tonnage Testing And Commissioning Etc As Required , Replacement Of Compressor Of 3.5Tr Capacity, Suitable For Existing Pac Unit Of M/S Fedders Lloyd Make, Including Fixing And Installation Of Compressor Conducting Of Pressure Testing By Charging Nitrogen Gas In To The System For Minimum 24 Hours, Arresting Leakage In The System Brazing And Vaccumizing With 2 Stage Rotary Pump Supply Of Refrigerant Gas And Charging With R410/407/R22 Or Suitable Gas To Match The Existing System, For Achieving The Required Suction Pressure To Deliver Required Tonnage Testing And Commissioning Etc As Required (M/S Copeland Make, Model: Cr62kqm-Tfd-233Dm Or Similar Superior Make) Make And Model To Be Got Approved By The Engineer-In-Charge) (Unit Ip Tax-5) , Replacement Of Expansion Valve Suitable For 7Tr Package Ac Unit Including Removing Of Faulty Valve, Fixing Of New Expansion Valve, Testing, Etc As Required (Make And Model Shall Be Suitable For Existing Pac And Model To Be Got Approved By The Engineer Incharge) (Unit Pcm-7) , Replacement Of Expansion Valve Suitable For 3.5Tr Capacity In Exiting 7 Tr Package Ac Unit Including Removing Of Faulty Valve, Fixing Of New Expansion Valve, Testing, Etc As Required (Make And Model Shall Be Suitable For Existing Pac And Model To Be Got Approved By The Engineer Incharge) (Ip Tax-4) , Attending Electrical Fault In Existing 7Tr Package Ac Unit By Checking The Complete Wiring, Replacing The Burnt Wiring, Reconnections, Replacing The Faulty Contactor, Testing Etc Complete As Required (Unit Pcm-2 & Sstp-4) , Providing Servicing Of 7Tr Pac Unit By Complete Cleaning Of The Evaporator Coil, Return Air Filters, Condensate Drip Tray, Checking The Drain Water Arrangement, Arresting Leakage Of Water From Indoor Unit If Any, Checking The Control Panel & Controller I/C Cleaning Of Condenser Coil With Suitable Cleaning Agent, Arranging Consumables, Testing The Hpac/Pac After Servicing Etc Complete As Required
Contract Date: Ref. Documents Contract Value : 4.76 Lakh
Government Departments No of Bidders 2
21.
Educational and Research Institute #11135857 AOC
Bids Are Invited For Rotary Evaporator (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : 4.72 Lakh
Government Departments No of Bidders 4
22.
Communications and Information Technology  #11124575 AOC
Bids Are invited for Supply of 3TR copper coil evaporator and copper coil condenser Ductable AC units - Supply of Inverter Ductable Air conditioner unit of rated capacity not less than 3 TR plus or minus ten percentage and minimum EER 10 BTU per watt -hour COP not less than 3.15 Air Flow not less than 1100 CFM External Static Pressure maximum-30Pa -45Pa suitable for operation with 1phase 220-240V 50Hz AC supply comprising of copper coil evaporator unit with blower copper coil air cooled condenser with Rotary or Scroll type Compressor fan units and wired or wireless control unit with LCD or LED displays pre charged with R410A or R32 or similar equivalent environment friendly refrigerant gas as per the specifications and additional specifications complete as required. Warranty Minimum 1 Year on Machine and 2 years additional warranty on Compressor , Installation Testing and Commissioning of 3 TR ductable Air conditioning units - Installation Testing and Commissioning of 3 TR Inverter ductable Air conditioning unit with fixing and fitting of indoor unit from ceiling with MS angle iron support tie rods and ceiling fasteners etc installation of outdoor unit on M S Angle iron supporting stand or platform with antivibration pads fixing and fitting of dampers and grills canvas connections connection of copper refrigerant pipes with indoor and outdoor units connecting drain pipes making electrical interconnection between indoor and outdoor units and extending power supply from the nearest power point making opening in the wall for laying of refrigerant pipes drain pipes interconnecting cables and making good the damages leak testing as per additional specifications etc complete as required. Materials are not included in this item , Supplying and laying of copper refrigerant pipes for 3 TR Ductable AC units - Supplying and laying of suitable sizes copper refrigerant pipes as recommended by the manufacturer for 3 TR Ductable AC units both liquid and hot gas lines along with insulation and all accessories including welding and brazing, flaring jointing and clamping the pipes with existing tray or wall as per specifications and additional specifications etc. complete as required. , Extra for supply and charging of additional Refrigerant gas - Extra for supply and charging of additional Refrigerant gas R32 or R410A suitable for Ductable AC units as per specifications and additional specifications etc. as required. , Providing indoor and outdoor unit mounting bracket system - Providing indoor unit ceiling mounting bracket system made of 25mmX25mmX5mm MS angle 8 to 10mm dia full threaded M S tie rods with ceiling fasteners nuts and bolts for mounting the Indoor units and M S angle and flat iron stand made out of 40mmx40mmx5mm angle and 40mmx5mm flat for outdoor units including grouting on CC roof with suitable nuts and bolts painting with two coats of primer and two coats of weather proof enamel paint as per specifications and additional specifications etc. as required , Supplying and laying of 2.5sq.mm 4 core PVC insulated copper conductor cable - Supplying and laying of 2.5sq.mm 4 core PVC or XLPE insulated and PVC sheathed copper conductor un-armoured cable of 1.1 KV grade on the surface of wall with saddles or on the existing cable tray by fixing with saddles or cable ties etc as required , Supplying and laying of 2.5sq.mm 5 core PVC insulated copper conductor cable - Supplying and laying of 2.5sq.mm 5 core PVC or XLPE insulated and PVC sheathed copper conductor unarmoured cable of 1.1 KV grade on the surface of wall with saddles on the existing cable tray by fixing with saddles or cable ties etc as required , Supplying and installing 300 mm width x 50 mm depth x 1.6 mm thickness perforated M.S. cable trays - Supplying and installing 20 mm width X 50 mm depth X 1.6 mm thickness size perforated painted with powder coating M.S. cable trays with perforation not more than 17.5 percentage in convenient sections joined with connectors suspended from the ceiling with M.S. suspenders including bolts and nuts painting the suspenders etc. as required. , Providing and laying of 40mm dia Fire retardant corrosion free medium class U PVC pipe along with accessories - Providing and laying of 40mm dia size Fire retardant corrosion free medium class U PVC pipe along with accessories such as bends sockets or couplers etc. confirming to IS 9537 Part 3 for uPVC conduits IS 3419 of 1988 for uPVC fittings and saddles or clamps etc. for drainage of condensate water of AC units including laying and fixing, cutting threading etc. complete as required , Providing and laying of 32mm dia Fire retardant corrosion free medium class U PVC pipe along with accessories - Providing and laying of 32mm dia size Fire retardant corrosion free medium class U PVC pipe along with accessories such as bends sockets or couplers etc. confirming to IS 9537 Part 3 for uPVC conduits IS 3419 of 1988 for uPVC fittings and saddles or clamps etc. for drainage of condensate water of AC units including laying and fixing, cutting threading etc. complete as required , Providing and laying of 25mm dia Fire retardant corrosion free medium class U PVC pipe along with accessories - Providing and laying of 25mm dia size Fire retardant corrosion free medium class U PVC pipe along with accessories such as bends sockets or couplers etc. confirming to IS 9537 Part 3 for uPVC conduits IS 3419 of 1988 for uPVC fittings and saddles or clamps etc. for drainage of condensate water of AC units including laying and fixing, cutting threading etc. complete as required , Supply fabrication and installation of 22 SWG GI sheet plenum duct complete with all accessories - Supply, fabrication and installation of 22 SWG GI sheet plenum or duct complete with all accessories such as anchor fastener black painted M.S Angle or rod supporting from ceiling expanded Polyethylene gasket galvanized hardware etc. complete as per the specifications and additional specifications and site conditions as required. , Supply and Fixing of rectangular fire retardant Canvas duct connector having fabric section vinyl coated woven nylon or polyester blend material - Supply and Fixing of rectangular fireretardant Canvas duct connector having fabric section vinyl coated woven nylon or polyester blend material and is connected to steel with a grip lock seam with fixing and jointing hardware suitable for 3TR 1200CFM Ductable AC as per specifications and additional specification etc. as required. , Supplying and fixing of powder coated extruded aluminium Supply Air Grills with fixed front louvers - Supplying and fixing of powder coated extruded aluminium Supply Air Grills with fixed front louvers suitable for fixing with the Ductable AC unit or GI plenum or Duct as per specifications etc. as required. , Supply and fixing 6 to 32Amps 1 pole MCB 10KA C Curve with connections and testing - Supplying and fixing 6 to 32Amps 1 Pole MCB 10KA C Curve MCBs suitable for inductive load in the existing MCB DB complete with connections testing and commissioning etc. as required. , Supply and fixing 63Amps 4 pole MCB 10KA C Curve with connections and testing - Supplying and fixing 63Amps 4 Pole MCB 10KA C Curve MCBs suitable for inductive load in the existing MCB DB complete with connections testing and commissioning etc. as required. , Supply and fixing 100Amps 4 pole Isolator with connections and testing - Supplying and fixing 100Amps 4 Pole Isolator in the existing MCB DB complete with connections testing and commissioning etc. as required. , Supply and fixing Blanker plates for MCBDBs - Supplying and fixing Blanker Plates in the existing MCB DB complete with connections testing and commissioning etc. as required. , Supply and fixing 4 pole metal enclosure box for fixing mcb and Isolators - Supply and fixing of 4pole metal enclosure box for fixing of 4pole MCB or isolator including grouting in surface or recess of wall as required. , Supply and fixing 20mmx12mm size heavy duty PVC Cassing and capping - Supplying and Fixing of 20mmX12mm size heavy duty PVC Casing capping or mini trunking on the surface of wall with all accessories etc. complete as required. , Supply and fixing 25mmx16mm size heavy duty PVC Cassing and capping - Supplying and Fixing of 25mmX16mm size heavy duty PVC Casing capping or mini trunking on the surface of wall with all accessories etc. complete as required. Total Quantity : 228
Contract Date: Ref. Documents Contract Value : 4.11 Lakh
Government Departments No of Bidders 2
23.
Communications and Information Technology  #11124574 AOC
Bids Are invited for Supply of 3TR copper coil evaporator and copper coil condenser Ductable AC units - Supply of Inverter Ductable Air conditioner unit of rated capacity not less than 3 TR plus or minus ten percentage and minimum EER 10 BTU per watt -hour COP not less than 3.15 Air Flow not less than 1100 CFM External Static Pressure maximum 30Pa-45Pa suitable for operation with 1phase 220-240V 50Hz AC supply comprising of copper coil evaporator unit with blower copper coil air cooled condenser with Rotary or Scroll type Compressor fan units and wired or wireless control unit with LCD or LED displays pre charged with R410A or R32 or similar equivalent environment friendly refrigerant gas as per the specifications and additional specifications complete as required. Warranty Minimum 1 Year on Machine and 2 years additional warranty on Compressor , Installation Testing and Commissioning of 3 TR ductable Air conditioning units - Installation Testing and Commissioning of 3 TR Inverter ductable Air conditioning unit with fixing and fitting of indoor unit from ceiling with MS angle iron support tie rods and ceiling fasteners etc installation of outdoor unit on M S Angle iron supporting stand or platform with antivibration pads fixing and fitting of dampers and grills canvas connections connection of copper refrigerant pipes with indoor and outdoor units connecting drain pipes making electrical interconnection between indoor and outdoor units and extending power supply from the nearest power point making opening in the wall for laying of refrigerant pipes drain pipes interconnecting cables and making good the damages leak testing as per additional specifications etc complete as required. Materials are not included in this item , Supplying and laying of copper refrigerant pipes for 3 TR Ductable AC units - Supplying and laying of suitable sizes copper refrigerant pipes as recommended by the manufacturer for 3 TR Ductable AC units both liquid and hot gas lines along with insulation and all accessories including welding and brazing, flaring jointing and clamping the pipes with existing tray or wall as per specifications and additional specifications etc. complete as required. , Extra for supply and charging of additional Refrigerant gas - Extra for supply and charging of additional Refrigerant gas R32 or R410A suitable for Ductable AC units as per specifications and additional specifications etc. as required. , Providing indoor and outdoor unit mounting bracket system - Providing indoor unit ceiling mounting bracket system made of 25mmX25mmX5mm MS angle 8 to 10mm dia full threaded M S tie rods with ceiling fasteners nuts and bolts for mounting the Indoor units and M S angle and flat iron stand made out of 40mmx40mmx5mm angle and 40mmx5mm flat for outdoor units including grouting on CC roof with suitable nuts and bolts painting with two coats of primer and two coats of weather proof enamel paint as per specifications and additional specifications etc. as required , Supplying and laying of 2.5sq.mm 4 core PVC insulated copper conductor cable - Supplying and laying of 2.5sq.mm 4 core PVC or XLPE insulated and PVC sheathed copper conductor un-armoured cable of 1.1 KV grade on the surface of wall with saddles or on the existing cable tray by fixing with saddles or cable ties etc as required , Supplying and laying of 2.5sq.mm 5 core PVC insulated copper conductor cable - Supplying and laying of 2.5sq.mm 5 core PVC or XLPE insulated and PVC sheathed copper conductor unarmoured cable of 1.1 KV grade on the surface of wall with saddles on the existing cable tray by fixing with saddles or cable ties etc as required , Supplying and installing 300 mm width x 50 mm depth x 1.6 mm thickness perforated M.S. cable trays - Supplying and installing 20 mm width X 50 mm depth X 1.6 mm thickness size perforated painted with powder coating M.S. cable trays with perforation not more than 17.5 percentage in convenient sections joined with connectors suspended from the ceiling with M.S. suspenders including bolts and nuts painting the suspenders etc. as required. , Providing and laying of 40mm dia Fire retardant corrosion free medium class U PVC pipe along with accessories - Providing and laying of 40mm dia size Fire retardant corrosion free medium class U PVC pipe along with accessories such as bends sockets or couplers etc. confirming to IS 9537 Part 3 for uPVC conduits IS 3419 of 1988 for uPVC fittings and saddles or clamps etc. for drainage of condensate water of AC units including laying and fixing, cutting threading etc. complete as required , Providing and laying of 32mm dia Fire retardant corrosion free medium class U PVC pipe along with accessories - Providing and laying of 32mm dia size Fire retardant corrosion free medium class U PVC pipe along with accessories such as bends sockets or couplers etc. confirming to IS 9537 Part 3 for uPVC conduits IS 3419 of 1988 for uPVC fittings and saddles or clamps etc. for drainage of condensate water of AC units including laying and fixing, cutting threading etc. complete as required , Providing and laying of 25mm dia Fire retardant corrosion free medium class U PVC pipe along with accessories - Providing and laying of 25mm dia size Fire retardant corrosion free medium class U PVC pipe along with accessories such as bends sockets or couplers etc. confirming to IS 9537 Part 3 for uPVC conduits IS 3419 of 1988 for uPVC fittings and saddles or clamps etc. for drainage of condensate water of AC units including laying and fixing, cutting threading etc. complete as required , Supply fabrication and installation of 22 SWG GI sheet plenum duct complete with all accessories - Supply, fabrication and installation of 22 SWG GI sheet plenum or duct complete with all accessories such as anchor fastener black painted M.S Angle or rod supporting from ceiling expanded Polyethylene gasket galvanized hardware etc. complete as per the specifications and additional specifications and site conditions as required. , Supply and Fixing of rectangular fire retardant Canvas duct connector having fabric section vinyl coated woven nylon or polyester blend material - Supply and Fixing of rectangular fireretardant Canvas duct connector having fabric section vinyl coated woven nylon or polyester blend material and is connected to steel with a grip lock seam with fixing and jointing hardware suitable for 3TR 1200CFM Ductable AC as per specifications and additional specification etc. as required. , Supplying and fixing of powder coated extruded aluminium Supply Air Grills with fixed front louvers - Supplying and fixing of powder coated extruded aluminium Supply Air Grills with fixed front louvers suitable for fixing with the Ductable AC unit or GI plenum or Duct as per specifications etc. as required. , Supply and fixing 4 pole metal enclosure box for fixing mcb and Isolators - Supply and fixing of 4pole metal enclosure box for fixing of 4pole MCB or isolator including grouting in surface or recess of wall as required. Total Quantity : 108
Contract Date: Ref. Documents Contract Value : 5.05 Lakh
Government Departments No of Bidders 2
24.
Communications and Information Technology  #11124557 AOC
Bids Are invited for Supply of 1.5TR copper coil evaporator and copper coil condenser Inverter Split AC units - Supplying of BEE approved 1.5 Ton BIS certified wall mounting type Inverter -Variable speed- Split Air Conditioning unit confirming to IS 1391 Part-2 having rated cooling Capacity greater than or equal to 5200 watts Rated Indian Seasonal Energy Efficient Ratio -ISEER- Wh by Wh greater than or equal to 5.20 with copper Evaporator and copper Condenser coil Rotary compressor suitable for operation on single phase 230 V plus or minus 10 percentage 50 Hz AC supply as per IS 1391 part-2 latest and ISO 14000 duly filled with ecofriendly refrigerant gas R32 or Equivalent with remote handset standard lengths of copper refrigerant pipes and foam insulation and drain pipe and interconnection cable and remote hand set with batteries etc. and reusable type synthetic fiber air filter for indoor unit including all features as per the detailed specifications. The OEM Warranty of AC Machine should be 1 Year on machine and 4 years additional warranty on PCBs and 9 Years additional warranty on Compressor. , Installation Testing and Commissioning of 1.5 TR Inverter Split Air conditioning units - Installation and testing and commissioning of 1.5 Ton or 2.0 Ton Inverter Split A.C. Unit and mounting or fixing of indoor and outdoor unit and fixing of refrigerant piping with expanded polythene foam insulation suitable size PVC pipe in wall crossings and laying of cable for interconnections and laying drain pipe of standard length which is supply along with AC unit minor civil work including making holes on wall for laying refrigerant pipe lines and control cable and drain pipes and closing the extra openings and making good the damages etc. as reqd. , Providing and fixing of suitable size L- shaped powder coated MS bracket - Providing and fixing of suitable size L- shaped powder coated MS bracket -2 nos. per set- on wall with suitable size anchor bolts for fixing of the outdoor unit of the split AC units including drilling holes etc. complete as reqd. , Providing and laying of additional refrigerant copper pipes for suction and discharge lines of Split AC units - Providing and laying of additional refrigerant copper pipe for suction and discharge lines -size not less than one by four inches and half inches dia or as recommended by the manufacturer along with expanded polythene foam insulation including cutting and brazing and making joint etc as reqd. The measurement shall be taken on linear basis for one circuit which includes suction and discharge line and foam insulation. , Supplying and laying of 4 core 2.5sqmm size PVC insulated and PVC sheathed copper conductor cable - Supplying and laying of 4 core 2.5sqmm size PVC insulated and PVC sheathed copper conductor cable for inter connection of indoor and outdoor units of ACs etc as reqd. , Providing and laying of additional drain pipe of size 20mm dia - Providing and laying of additional drain pipe of size 20mm dia PVC braided or solid medium class ISI marked along with all accessories and fixing on surface of wall with PVC saddles if required suitable for drainage of condensate water etc. as reqd. , Providing of additional R32 refrigerant gas - Providing of additional R32 refrigerant gas if required and charging into the Inverter Split AC unit etc. as reqd. , Supply and Fixing of MCB protected 3 pin socket outlet boxes - Supply and Fixing of MCB protected 3 pin socket outlet boxes with metal board consisting of 1 no 20 Amps 3 pin socket outlet with 20 Amps plug top and 1 no 20 or25 amps SP MCB of C series suitable for 220-230 volts single phase 50 Hz AC supply as required. , Dismantling the existing old and life expired and faulty WAC units along with Accessories - Dismantling the existing old and life expired and faulty WAC units along with Accessories and other unwanted electrical boxes conduits angle iron frames as required. , Closing the wall openings for Window AC units - Closing the wall openings for Window AC units after removing the wooden or aluminium frame if any with 10 inches or 15 inches thick brick wall matching with original thickness by cement bricks inccluding plastering etc. complete as required. Total Quantity : 129
Contract Date: Ref. Documents Contract Value : 3.58 Lakh
Government Departments No of Bidders 3
25.
Communications and Information Technology  #11124552 AOC
Bids Are invited for Supply of 1.5TR copper coil evaporator and copper coil condenser Inverter Split AC units - Supplying of BEE approved 1.5 Ton BIS certified wall mounting type Inverter -Variable speed- Split Air Conditioning unit confirming to IS 1391 Part-2 having rated cooling Capacity greater than or equal to 5200 watts Rated Indian Seasonal Energy Efficient Ratio -ISEER- Wh by Wh greater than or equal to 5.20 with copper Evaporator and copper Condenser coil Rotary compressor suitable for operation on single phase 230 V plus or minus 10 percentage 50 Hz AC supply as per IS 1391 part-2 latest and ISO 14000 duly filled with ecofriendly refrigerant gas R32 or Equivalent with remote handset standard lengths of copper refrigerant pipes and foam insulation and drain pipe and interconnection cable and remote hand set with batteries etc. and reusable type synthetic fiber air filter for indoor unit including all features as per the detailed specifications. The OEM Warranty of AC Machine should be 1 Year on machine and 4 years additional warranty on PCBs and 9 Years additional warranty on Compressor. , Installation Testing and Commissioning of 1.5 TR Inverter Split Air conditioning units - Installation and testing and commissioning of 1.5 Ton or 2.0 Ton Inverter Split A.C. Unit and mounting or fixing of indoor and outdoor unit and fixing of refrigerant piping with expanded polythene foam insulation suitable size PVC pipe in wall crossings and laying of cable for interconnections and laying drain pipe of standard length which is supply along with AC unit minor civil work including making holes on wall for laying refrigerant pipe lines and control cable and drain pipes and closing the extra openings and making good the damages etc. as reqd. , Providing and fixing of suitable size L- shaped powder coated MS bracket - Providing and fixing of suitable size L- shaped powder coated MS bracket -2 nos. per set- on wall with suitable size anchor bolts for fixing of the outdoor unit of the split AC units including drilling holes etc. complete as reqd. , Providing and laying of additional refrigerant copper pipes for suction and discharge lines of Split AC units - Providing and laying of additional refrigerant copper pipe for suction and discharge lines -size not less than one by four inches and half inches dia or as recommended by the manufacturer along with expanded polythene foam insulation including cutting and brazing and making joint etc as reqd. The measurement shall be taken on linear basis for one circuit which includes suction and discharge line and foam insulation. , Supplying and laying of 4 core 2.5sqmm size PVC insulated and PVC sheathed copper conductor cable - Supplying and laying of 4 core 2.5sqmm size PVC insulated and PVC sheathed copper conductor cable for inter connection of indoor and outdoor units of ACs etc as reqd. , Providing and laying of additional drain pipe of size 20mm dia - Providing and laying of additional drain pipe of size 20mm dia PVC braided or solid medium class ISI marked along with all accessories and fixing on surface of wall with PVC saddles if required suitable for drainage of condensate water etc. as reqd. , Providing of additional R32 refrigerant gas - Providing of additional R32 refrigerant gas if required and charging into the Inverter Split AC unit etc. as reqd. , Supply and Fixing of MCB protected 3 pin socket outlet boxes - Supply and Fixing of MCB protected 3 pin socket outlet boxes with metal board consisting of 1 no 20 Amps 3 pin socket outlet with 20 Amps plug top and 1 no 20 or25 amps SP MCB of C series suitable for 220-230 volts single phase 50 Hz AC supply as required. Total Quantity : 69
Contract Date: Ref. Documents Contract Value : 5.14 Lakh
Government Departments No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 7
Maharashtra View Result →
27.
Educational and Research Institute #11059846 Price Bid
Tender For Equipment; Purchase of Equipment: Rotary evaporator with accessories Rotavapor V-Condenser P+G assembly Cooling capacity1500cm/hour with Drive unit 3 inch Dark Segment Display for Rotation speed, lift position and heating bath temperature (set and actual value) displayed on the Heating Bath Base. Allows user to monitor all parameters at a glance., Motor lift with 10-330 RPM, Limit position detection adjustment range Vertical 180mm, Immersion Angle 15-52.5° (Adjustable with 7 Stages), Flask Sizes Uses from 50ml....3000 ml Capacity Safety Stop: Automatic operation stop by power failure, Lifts flask automatically out of heating bath Manually adjustable via button within a range of 100 mm prevents glass breakage and damage to bath pan Patented multifunctional Combi-Clip for evaporating flask fixation and removal, as well as vapor duct release Allows one handed flask removal 1 liter evaporating flask NS 29/32 and 1 liter receiving flask, Protection Class IP42, CE CSA & ISO 9001 Certified Lift height indication Position is digitally indicated on display of heating bath and Key button Lock function Heating Bath, Digital Display heating bath temperature range of up to....95°C Kettle Connection: Cordless bath Allows easy emptying and refilling of bath without unplugging Infrared communication: Transition of heating bath data to interface Maximum Bath Capacity 4.2 Litre, Digital temperature display allows adjusting set temperature and indicates actual temperature Over Heat Protection: Cut off power when actual temperature exceeds set temperature or by rapid temperature increase Protection Class IP21, CE/ISO 9001 Certified, Heating Power 1300W Vacuum Controller, 3 Dark Segment Digital Display controller indicating, adjusting and controlling the vacuum. Special features like a) measure and display the pressure, b) Regulate the vacuum pump speed & c) Start/Stop the vacuum pump Manually regulate the system leakage using a needle valve, Two operating modes (manual, timer), Measuring Range: 1400-0 mbar, Control range: 1100-0 mbar, Hysteresis Automatic or 1 - 500 mbar Measuring Accuracy: +2mbar (+)- after calibration at constant temperature Protection Class IP44, CE/CB/UL/CSA Certified, Along with woulff bottle for Trap Vacuum Pump,- 100% Solvent recovery DC motor Brushless vacuum pump pump for reusable Speed control chemical resistant PTFE diaphragm DC motor Brushless vacuum pump Achieve more than 90% solvent recovery and reusable using interface, Vacuum generation optimally suited to work with the Rotavapor. Final vacuum: 13 mbar (with Gas Ballast), Flow Rate: 1.3 m3/h. InOn/Off.control the pump is automaticallız turned On and Offseis the interfece On/Off communication
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
28.
Housing Urban and Rular Development #11047139 Technical Bid
Tender For 1. Supply, Installation, Testing And Commissioning Of Walk In Cold Room Made Of 100 Mm Puf Panels With Ppgi For Internal And External Surface For Cold Room Along With Other Accessories Having 01 No. Of The 34 To 40(W) X 72 To 80(H) Flush Door 100Mm Ppgi Finish Both Sides. The Job Includes Civil Works As Per Necessity And Other Allied Works At Site. The Puf Panels Shall Be Of Make Sintex /Lloyd/Jindal. Material To Be Stored : Blood Samples Ambient Temperature: =450C Room Temperature : 20C Pull Down Time : =20 Hrs Room Size (External) : 10×8×10 Cold Room Structure: 1) Room Size (External) : 10×8×10 2) Door Size: 34 To 40(W) X 72 To 80(H) 3) Door Type: 100Mm Ppgi Both Side Flush Type Door, Plastic Curtains On The Door Way, Flush Type Door With Kick Plate At Bottom And Fitted With Door Closer, Examination Window (View Port), Seal Closer Mechanism. Heavy Duty Lock - Lockable With 100% Fail-Safe Provision For Opening From Inside. 4) Wall Panels: 100 Mm Thick Puf Wall Panels With Density Of 40±2 Kg/M3 For Cold Room With Cam Lock For Puf Panels Inter Locking. 5) Panel Finish: Ppgi For Both Sides Of Panel (Corrosion And Moisture Resistant) 6) Flooring: Aluminum Checker Plate 10 Guage Or 3Mm Thick With Over Insulated Base Refrigeration System: Supply, Installation, Testing And Commissioning Of 01 No. Refrigeration Units (One Main And One Standby Cold Room Machine) Of Minimum Of 24000 Btu/Hr Capacity Each Along With Evaporator Make: Bluestar, Voltas, Carrier. Job Also Includes Supply And Installation Of Other Accessories Such As Expansion Valve, Control Panels, U Flashings, Inner Flashings And Flat Flashings And Sealant Etc. As Per Site Requirement. Supply And Installation Of Ms Frame In Position And Applying A Priming Coat Of Approved Steel Primer For Odu Unit And For Isolator Mcb With Box With Electrical Wire With Copper Piping, Drain Work And Other Civil Work As Per Site. 1) Temperature Range: +1°C To +6°C 2) Refrigerant: Eco-Friendly As Per Norms/Design 3) System: Air-Cooled 4) Compressor: Reciprocating/Rotary 5) Cooling Capacity: Min. 24000Btu/Hr @-4 Evap. Temp. And Condensing Temp Of 540C 6) Number Of Cdu: 01 No. 7) Evaporator: Min. 24000Btu/Hr 8) No. Of Evaporator: 01 No With 03 Nos Of Fans: 9) Supply: Three Phase 10) Electric Load: 2.8Kw/Hr (Approx.) 11) Automatic Voltage Stabilizer: 7.5 Kva 3 Phase Along With Supply Installation Testing And Commissioning Of Required Assorted Size Cables As Per Site Requirements For Commissioning And Running Of Whole Installed System. Electrification: Proper Electrification Of Cold Storage Room By Way Of Providing And Installation Of Power Points, Lighting, Fans Along With Electric Cables Of Assorted Sizes As Per Site Requirement. Complete Job Includes Tapping Of Power Supply From The Main Panel With Cost Of Material, Labour Charges And All Kind Of Taxes Thereof. Complete Job With Cost Of Material, Labour Charges And All Kind Of Taxes Thereof. , Supply And Fixing Of 04 Nos. Ss-304 Adjustable Rack Of Size 4-0X 8-0X1-0 With Sheet Thickness 1.0/0.8 Mm In Position Along With Required Allied Works For Medicine Storage Size As Per Medical Standards. , Chemical Earthing Of Db By Way Of Excavation Of 01 No. Pit Of Proper Size Upto A Depth Of 03M For Providing And Laying Of 03 Meter Copper Electrode 01 Nos. In Hard And Soft Soil Followed By Filling Of Required Quantity Of Earthing Chemical. Job Includes Filling Of Pit With Excavated Soil And Fitment Of Copper Electrode With Copper Strip From Electrode To Machine. Complete Job With Cost Of Material, Labour Charges And All Kind Of Taxes Thereof. , Electrical Work- Providing And Fitting Of 02 Nos. Tpn, Distribution Board, Aluminum (Armoured) 25Sqmmx4 Core - 30 Mtrs, 6 Sq.Mm Copper Cable- 60 Mtrs. , Miscellaneous Work- Job Includes Minor Civil Works And Repairs To The Wall Plaster Wherever Necessary, Alarm System For Trapped Person, Loading, All Type Of Miscellaneous Framework, Unloading, Freight, Lock System, Etc , Supply Installation Testing And Commissioning Of 2.0 Tr Split Air Conditioners (Hot And Cold) With All Accessories (Along With Outdoor Stand) And Ambient Upper Temperature Range Of = 52 Degree Celsius For Cooling With Maximum Cooling Capacity = 6500 W And For Heating Ambient Lower Temperature Range = 0 Degree Celsius With Maximum Heating Capacity = 6000 W Having Air Flow Rate =590 Cfm With Minimum 3 Star And Of Reputed Make I.E., O-General, Mitsubishi, Daikin, Hitachi, Bluestar Along With Allied Accessories I.E. Minimum Of 10 Of Refrigerant Pipes And Communication Cable. Complete Job As Per Site Requirement And Instructions Of Engineer-In-Charge And Also Includes Cost Of Materials, Labour Charges, Transportation Charges And All Other Charges. , Supply, Installation, Testing And Commissioning Of 5Kva Copper Wound Automatic Wall Mounted Voltage Stabilizer Input Voltage Range Of 90-300V & Of Superior Quality Isi Mark For Acs. Make: Microtek/Aulten/Servokon/Electricfield , Providing And Fitting Of Spn Of 40 Annual Periodical Maintenance Of Reputed Make I.E. Havells, L&T With Cover (Complete With Fittings) For 2.0 Tr Capacity Acs To Be Installed. , Providing And Fitting Of Extra Copper Pipe With Insulation. , Providing And Laying (Using Conduits And Wire Fasteners / Cable Clips) ) Of 10 Sq Mm 4 Core Multistrand Flexible Isi Marked, Frls Pvc Insulated Copper Conductor Cable And Of Standard Make I.E. Havells, Polycab, Finolex, Anchor Only For The Purpose Of Connecting Stabilizers To The Electrical Panel. Complete Job As Per Instructions Of Engineer-In-Charge And Site Requirements And Also Includes Cost Of Materials (Including Clamps, Bends/Elbows, Tee-Bends, Thimbles Etc.), Labour Charges, Transportation Charges And All Other Charges And Taxes. , Providing And Laying Of (Using Conduits And Wire Fasteners / Cable Clips/Conduit Fasteners) 4 Sq Mm Isi Marked, Frls Pvc Insulated Copper Conductor Cable Of Standard Make I.E. Havells, Polycab, Finolex, Anchor Only For The Purpose Of Connecting Air Conditioning Units (Outer & Inner) To The Stabilizer. Complete Job As Per Instructions Of Engineer-In-Charge And Site Requirements And Also Includes Cost Of Materials (Including Clamps, Bends/Elbows, Tee-Bends, Thimbles Etc.), Labour Charges, Transportation Charges And All Other Charges And Taxes. , Providing And Laying Of Pvc Drain Pipes Of Assorted Sizes Viz. ¾, Etc. To Collect And Transport The Drained Water From The Ac Unit To A Designated Location, Considering The Specific Requirements Of The Site. The Pvc Pipes Will Be Installed With Appropriate Size Bends And Clamps To Ensure Proper Alignment And Secure Connections. Job Also Includes Miscellaneous Works Civil Works Like Wall Opening To Pass Ducts & Pipes, Plastering & Refinishing Of The Same To The Original Finish As Per The Site Requirements. Complete Job As Per Instructions Of Engineer-In-Charge And Site Requirements And Includes Cost Of Materials (Including Clamps, Bends/Elbows, Nipples, Tee-Bends, Etc.), Labour Charges, Transportation Charges And All Other Charges And Tax. , Providing, Fitting And Testing Of Air Curtains At The Main Entrance Of Blood Bank At Gmch Jammu The Air Curtain Should Be In A Metal Casing, Strong, Fire Resistant, Simple Installation And Easy Cleaning. They Should Have Double Air Way Deflectors Design Obtaining An Even Air Stream So That It Creates An Invisible Air Barrier Over The Doorway That Prevents The Inner Cool/Warm Air From Going Outside And Also Prevents Insects , Dust Etc From Entering Inside The Ward. All The Air Curtains Have To Be Fixed On The 8 Mm Ply Board Fitted And Hung By Sides . The Specifications Of Air Curtain Should Be: Material Of Cabin-- Cold Rolled Mild Steel 1. Base Plate- 16 Swg 2.Body- 18 Swg 3.Grilles- 20 Swg 4. Blower Housing- 20 Swg 5. Length- 6.00 Of Curtain Interior Finish- Anti Rust Treatment With Primer Paint, Exterior Finish- Ht Paint/Stove Painting (Powder Coating), Fans And Motors- The Multiple Forward Curved Centrifugal Type Aluminum Fan Wheels Statically And Dynamically Balanced Driven By Extended Motor Shaft. The Job Also Includes Providing And Fitting Of 4Mm Sq Wire Of Suitable Length To Be Connected To The Main Power Supplies Of Each Unit, Spns- 1 Nos With Covers, Baton, Pvc Clamps And Gutties Etc As Per Site Requirement Complete Job Includes Cost Of Material, Transportation, Labour Charges And All Types Of Taxes. , Repair And Cleaning Of Ducts Of Air Conditioning At Various Locations Of Blood Bank Of Gmch Jammu By Way Of Removal Of Vent Grilles And Diffusers For Manual Cleaning Using Industrial-Grade Hepa-Filtered Vacuums, Soft-Bristle Brushes, And Compressed Air Tools To Eliminate Dust, Debris, And Other Particulate Buildup From The Visible Portions Of The Duct Openings And Repair To All The Damaged Vents As Per Site Requirement So That The Air Flow Reaches The Last End Duct. All Debris Collected During The Cleaning Will Be Properly Contained And Disposed Of Offsite. After Cleaning, All Vents And Will Be Securely Reinstalled And Airflow Tested To Confirm Proper Operation. A Visual Inspection And Photographic Documentation Of Cleaned Vents Will Be Included In The Final Job Report. The Job Includes Replacement Of Damaged Power Coated Aluminium Extruded Grill. Complete Job Includes Cost Of Material, Consumables,Labour And All Types Of Taxes Etc , Providing And Fitting Of 4K Hdmi Cable 5 Meter , 55 Led Tv 4K For 24X7 Operations With Uhd Dimming And Auto Motion Plus Make: Samsung/Sony/Sansui , Supply & Installation Of 5 Mp Ir Fixed Network Dome/Bullet Camera- Suitable For Outdoor Operation With Following Specifications Along With Accessories Required For Fitting. 30 Meter Ir, 1/2.7 Progressive Scan Cmos Color: 0.0125 Lux @ (F2.0, Agc On) 0 Lux With Ir, Resolution: 2592 × 1944 Or Better ,Wdr Should Be 120Db Or Higher, 3.6Mm,Mic And Speaker Inbuilt , Camera Shall Have Ip67 Ingress Protection And Ce, Fcc, Ul, Rohs,Cmmi-5 , ,Weee Certifications Make: Hi Focus/Matrix/Prama , Supply & Installation Of 16Channel 2 Sata Network Video Recorder-For Encoding And Processing The Video Data At The Camera ,Then Streaming To The Nvr Recorder For Storage And Remote Viewing With Following Specifications And Features. Nvr Shall Support Up To 12 Mp Or Higher,Nvr Shall Support 4K (3840 × 2160) ,Nvr Shall Support 16-Ch Playback,Tcp/Ip, Dhcp, Dns, Ddns, Ntp, Sadp, Smtp, Nfs, Iscsi, Upnp™, Https ,Nvr Shall Support 02 Sata Interface. Nvr Shall Support Up To 16 Tb Capacity For Each Hdd,1 Rj-45 10/100/1000 Mbps, Nvr Shall Support Sh.265,H.265+,H.265,H.264 Video Compression, Onvif Compatible,Shall Have Ce, Fcc, Ul, Bis,Rohs,Cmmi-5 ,Weee Certifications Make: Hi Focus/Matrix/Prama , 4 Tb Av Hdd Make: Seagate/Wd/Toshiba , Providing & Fitting Of Rack 4U With Glass Door And Lock Fully Loaded Conforms To Din 41494 & Iec 297 , Iso 9001:2015 Standards Make: Comrax/ President/Apc , Supply & Installation Of 8 Port Giga Poe Switch, With 8*10/100/1000Mbps Ports1-8 + 2*10/100/1000 Ports 9-10 Poe Ports, Full Duplex ; 1000 Mbps, ,Poe Power Budget: 96W,Standards: Ieee 802.3, Ieee 802.3U, Ieee 802.3Ab Ieee 802.3Xl Ieee, Packet Forwarding Rate: 14.88Mbps, 8K Mac Address Table, Packet Buffer Size 192Kb Make: Hi Focus/Digisol/D-Link/Netgear , Providing & Fitting Of Conduit 25Mm Along With Clamps Etc. , Providing/Supply, Installation, Testing & Commissioning Of Cat-6 Outdoor Cable Cat6 4-Pair U/Utp Outdoor Double-Jacketed Cable With Frequency Range: 1-250 Mhz, 23Awg ( 0.55Mm) Solid Bare Copper Conductor, High-Density Polyethylene(Hpde) Color Coded As Per Ansi/Tia-568 2-D Insulation,Cable Core: 4 Twisted Ppair Held In Place By Hdpe Cross-Web Separator,Water Resistant: Jacket Only,Inner Jacket: Lszh Grey, Outer Diameter:7.0Mm Nominal,Outer Jacket: Uv Resistant Hdpe For Outdoor Use, Black Make: Amp/ Honeywell/Commscope/Comrax , Providing & Laying Of Power Cable With 3 Core ,2.5 Sq.Mm ,Copper Make: Finolex/ Havell/ , 1Kva Online Ups With 60 Minutes Smf Battery Backup With Rack Make: Elnova/Fuji/Apc , Providing And Fitting Of Rj 45 Jacks Which Includes Crimping At Both The Ends Of The Cable , Integration, Testing &Commissioning All The Equipments And System For Proper Functioning
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
29.
Educational and Research Institute #10976932 AOC
Tender For supply of Equipment For Basic Science. , Equipment For Physics Laboratory , Chemical Reagents For Chemistry Laboratory , Laboratory Glassware , Vernier Callipers , Metallic Cube , Cylinder , Screw Gauge , Spherometer , Glass Slab , Prism , Wooden Board , Magnetic Needle , Bar Magnet , Optical Bench(Steel) , Concave Mirror , Convex Mirror , Concave Lens , Convex Lens , Ohms Law Apparatus , Meter Bridge With Jokey , Rheostat , Galvanometer , Ammeter , Voltmeter , Resistance Coil 2 Terminal Type , Potentiometer With Jokey , Leclanché Cell , Deniel Cell , Battery Eliminator , Resistance Box (1-1K, 1-5K, 0.1-10.0) , Plug Key (One Way) , Plug Key Two Way , Plug Key Four Ways , Searls Apparatus With Weights , Bartons Twisting Vertical Apparatus (Weights) , Joules Calorimeter , Thermometer , Newtons Law Of Cooling Apparatus , Digital Balance , Spectrometer With Prism Table , Newtons Ring Apparatus , Sodium Lamp With Wooden Cover , Sodium Lamp Transformer , Inertia Table , Spirit Level , Magnetometer Deflection , Magnetometer Vibration , P N Junction Kit (Diode Characteristics) , Capillary Viscometer , Travelling Microscope , Plastic Beaker , Induction Cooktop , Stand , Bar Pendulum , Simple Pendulum , Wire Cutter , Digital Multimeter , Stop Watch(Analog) , Polaroid , Ring Magnets , Meter Scale , Tunning Fork Of Known Frequency , Resonance Tube Apparatus & A Rubber Pad , Soldering Iron With Stand , Spring Constant Apparatus Heavy Type , Ethyl Alcohol ( Absolute Alcohol, Denatured Alcohol ), 500 Ml , Sodium Hydroxide, 500G , Potassium Hydroxide, 500G , Oxalic Acid Dihydrate , Mohrs Salt , Sulphuric Acid,500 Ml , Hydrochloric Acid, 500 Ml , Nitric Acid, 500 Ml , Potassium Dichromate, 500 G , Potassium Permanganate, 500G , Phenolphthalein Indicator, 100 G , Methyl Red, 25 G , Methyl Orange, 25 G , Erichrome Black T, 25 G , Ethylene Diamine Tetra Acetate , 100 G , Hydroxylamine Hydrochloride, 100 G , Chloroform For Synthesis, 500 Ml , Dichloromethane Ar/Acs , Silver Nitrate 99.8%, 10 G , Sodium Carbonate (Anhydrous) Pure 99.5%, 500 G , Magnesium Bicarbonate, 500 G , Buffer Solution (Ph=10), 100 Ml , Sodium Thiosulphate, 500 G , Potassium Chloride, 500 G , Ammonium Sulphate, 500 G , Barium Chloride Dihydrate Cryst. Pure, 500 G , Sodium Carbonate (Anhydrous) Pure 99.5%, 500 G , Nesslers Reagent (For Detection Of Ammonia And Ammonium Salt), 100 Ml , Mercuric Nitrate Monohydrate 98.0% (Mercury Ii Nitrate), 25 G , Ammonia Solution Extrapure Annual Repair Grade, 30%, 500Ml , Ammonia Solution 0.91% 500Ml , Cobalt (Ous) Nitrate Hexahydrate Purified (Ex Co) 97.0-101.0% (Cobalt (Ii) Nitrate, 100 G , Sodium Phosphate Dibasic (Anhydrous), 250 G , Sodium Nitrate Purified 98.0% , Calcium Chloride Anhydrous , 1 Kg , Glacial Acetic Acid, 500 Ml , Zinc Metal Granulated As Free,100 G , Potassium Chromate, 99.5% Srl, 500 G , Sodium Carbonate (Anhydrous) Pure 99.5% , Ammonium Chloride Purified , 500 G , Lead Chloride, 500 G , Ammonium Carbonatepurified, 500 G , Magnesium Chloride Hexahydrate Purified Cryst. 98.0%, 500 G , Sodium Nitroprusside, 100 G , Potassium Iodide Pure 99.0% , 100 G , Iodine Resublimed Annual Repair 99.8%, 100 G , Sodium Chloride Cryst. Pure 99.5% , 500 G , Glycerol 98% (1 Litre) , Hydrofluoric Acid, 5L , Potassium Ferrocyanide Purified 99.0%, 500 G , Ammonium Molybdatetetrahydrate Cold Soluble, 250 G , Ammonium Oxalate Monohydrate Purified, 500 G , Sodium Sulphate Anhydrous Purified (Sodium Sulphate Dried) 99.0% , 500 G , Sodium Sulphite Anhydrous Purified 96.0% , 500 G , Lead Nitrate 99.0% (Lead Ii Nitrate), 500 G , Lead Acetate Paper , Zinc Nitrate Hexahydrate 96.0-103.0%, 500 G , Zinc Chloride (Dry) Purified 97.0% , 500 G , Zinc Carbonate Basic Zn) 58.0%, 500 G , Strontium Chloride Purified 98.0-101.0%, 500 G , Strontium Nitrate Anhydrous Purified 99.0%, 500 G , Barium Nitrate Purified 99%, 500 , Magnesium Sulphate Dried 62-70.0%, 500 G , Magnesium Acetate Tetrahydrate, 500 G , Magnesium Carbonate Basic Light 24.0%, 250 G , Ammonium Iodide, 50 G , Ferrous Sulphate Heptahydrate Purified 99.0%, 500 G , Nickel Sulphate Hexahydrate Purified 98.0%, 250 G , Cupric Sulphate Pentahydrate Pure, 99%, 500 G , Zinc Sulphate Heptahydrate Purified (Zinc Sulphate-7-Hydrate) 99.0% , Magnesium Sulphate Dried 62-70.0% , Ethyl Acetate For Synthesis 99.0% , Fehling Solution A , 500 Ml , Fehling Solution B, 500 Ml , Tollens Reagent, 125 Ml , Benedict Solution, 100 Ml , 2,4-Dinitrophenylhydrazi Ne (Dnph) Reagent Grade, 99%, 25 G , Silica Gel, Adsorbent, 500 G , Silica Gel For Column Chromatograph, 500 G, Ph 10% Suspension, 6.5 To 8.5 Particle Size: Coarser Than 60 Mesh:5.0% Finer Than 120 Mesh:10% , Silica Gel For Thin Layer Chromatograph, 500 G , Silicon Oil, For Oil Baths Upto 250 °C, 1L , Nitrile Gloves Powder-Free, Blue (Medium) -100 Pieces , Nitrile Examination Gloves (Box Of 200) , Acetyl Chloride, 98% Extra Pure, 500 Ml , Aniline,99% Extra Pure , Acetone, 99.5% Ar/Acs, 2500 Ml , Benzaldehyde, 99% Annual Repair , Beta Napthol, 98% , Methanol, 99.5% Extra Pure, 2500 Ml , Acetaldehyde, 20-30% For Synthesis , Burette Clamp With Stand , Burette B Grade , Funnel , Test Tube Borosilicate Glass With Stand , Beaker Borosilicate Glass , Beaker Borosilicate Glass , Soxhlet Hot Extraction With Stand , Glass Condenser Air , Vacuum Rotary Evaporator , Glass Spiral Reflux Condenser , Conical Flask , Conical Flask , Measuring Cylinder, Borosilicate Class B , Columns For Chromatography , Motorized Analytical Weighing Balance , Syphon With Pipe , Ultrasonic Bath Sonicator , Separating Funnel , Buchner Funnel Filtering Fit, Vacuum Filter Flask Set , Adapter Joints , Volumetric Flask , Volumetric Flask , Pipettes 10 Ml , Pipettes 20 Ml , Pipettes 25 Ml , Glass Dropper , Glass Rod , Petri Dishes , Watch Glass , Wire Gauze , Spatula , Test Tube Holder , Test Tube Brush , Thermometer , Filter Paper (Whatman) , Magnetic Stirrer Hot Plate , Wash Bottle , Plastic Clamp For Joint Fittings , Spirit Lamp , Round Bottom, Short Neck, With Interchangeable Joint, (50, 100, 250 Ml), 20 Pc Per Set , Laboratory Water Distillation Setup (Steel) , Porcelain Mortar And Pestle Mortar And Pestle (Granite) Type 1 , Porcelain Mortar And Pestle Mortar And Pestle (Granite) Type 2 , Porcelain Crucible With Lid , Magnetic Bead , Digital Oil Bath, Stainless Steel , Rubber Septa (10 Pc Per Pack) , Litmus Paper , Ph Paper , Daniel Cell , Platinum Wire Loop , Glass Desiccator , Vacuum Desiccator , Laboratory Vacuum Pump , Reagent Bottle Amber , Laboratory Deep Freezer , Separating Funnel Holder Stand , Test Tube Plastic Stand Separating Funnel Holder Stand
Contract Date: May 05, 2026 Contract Value : 30.01 Lakh
Government Departments No of Bidders 4
30.
Communications and Information Technology  #10914488 AOC
Bids Are invited for Supply 3Tr Ductable Inverter Split Ac - Supply Of Ductable Type Ceiling Wall Mounting Type 3 Tr Capacity Inverter Type Split Air Conditioner Unit With Rotary Scroll Type Compressor Suitable For Working On 415V 3Phase 230V 1 Ph 50Hz Ac Supply And Shall Have A Nominal Cooling Capacity Not Less Than 36000 Btu Per Hr With Minimum Eer 10 Btuper W Hr And Having Static Pressure Not Less Than 45 Pascals And The Ac Unit With Pre Charged Eco Friendly R410a Or Equivalent Refrigerant Gas. The Evaporator Indoor Condenser Out Door Coils Shall Have Copper Refrigerant Tubes Pipes Only Including Supply And Fixing Of Powder Coated Air Deflection Grill Of Suitable Gauge Ms Sheet For Closure Of The Above Ac Units Supply Air Portion Including Necessary Associated Items As Required And Including Ac Unit Transportation To Sites At Various Location Under Karnataka Telecom Circle With Loading And Unloading Toppingup Of Refrigerant Gas If Necessary As Required. The Unit Shall Have 12 Months Manufacturers Suppliers Warranty Including For Pcb Board. The Warranty For Compressor Shall Be Minimum 3 Years Make Of Ac Carrier Daikin Hitachi Ogeneral Blue Star Voltas Mitsubishi Electric India Mitsubishi Heavy Industries Panasonic Lg Samsung Sidwal. Separate Agreement Will Be Formed Site Wise By The Executive Engineer Elec Concerned , Itc 3Tr Ductable Inverter Split Ac - Installation Testing And Commissioning The Above 3 Tr Ductable Type Ac Unit Complete With All Accessories Including Installation Of Outdoor Unit On Suitable Ms Angle Framework Made Up Of 35Mmx35mmx5mm Ms Angle Atleast 600Mm Above Floor Level Fixing Of Indoor Unit On The Wall With Suitable Ms Rod Angle Iron Support Including Welding Cutting Painting Of Stands Minor Civil Works Complete Etc As Required. , Refrigerant Copper Piping For Liquid Line - Supplying And Laying Of Following Size Copper Refrigerant Pipe For 3Tr Inverter Type Ductable Split Ac Units As Per Manufacturers Recommendation Suitable For Above Units
Contract Date: Ref. Documents Contract Value : 12.93 Lakh
Government Departments No of Bidders 4
31.
Banking and Finance #10912291 AOC
Bids Are invited for 1.5 TR Capacity Hi Wall mounting 5-star rated Inverter Split AC - Supply, testing, commisioning & Installation of 1.5 TR Capacity Hi Wall mounting 5-star rated Inverter Split AC with cordless remote and Copper Condensor Coil. AC Make, Voltas/Bluestar /Carrier/Daikin /LG/Godrej(including repairing of damage while installation) and 3 meter copper pipe , 2.0 TR Cassette type split air conditioners inverter model 5 star - Supply, testing, commisioning & Installation of 2 TR Cassette Type Inverter AC, 5 STAR with Copper Condensor Coiland refrigerant (R32 or R 410A) Indoor unit ceiling hung comprising cooling coil, evaporator fan with motor, filters, insulated drain pan, drain pump, expansion valve, refrigerant filter drier with codeless remote control unit, etc. Outdoor unit comprising single phase hermetically sealed scroll / rotary compressors, condenser coil with fan & motor, starters / controls / cutouts / relays etc., mounted inside a powder coated sheet metal cabinet of 2mm thick, duly treated for corrosion protection complete, mounted on ribbed rubber pads. AC Make, Voltas/Blue Star/Carrier/Daikin /LG , Reprigerent Pipe for 1.5 split AC - For 1.5 TR Copper type split air conditioners Supply and laying of copper pipes, drain pipes (covered with GI pipes wherever necessary), copper wiring in GI conduits neatly drawn in professional manner from power points to outdoor / indoor units complete with all necessaries and making good all the damages. , Reprigerent Pipe for 2.0 TR cassette AC - For 2 TR Copper Cassette type split air conditioners Supply and laying of copper pipes, drain pipes (covered with GI pipes wherever necessary), copper wiring in GI conduits neatly drawn in professional manner from power points to outdoor / indoor units complete with all necessaries and making good all the damages. , 4 KVA Stabilizer for split AC - Supply and Installation of 4 KVA Stabilizer for 1.5 TR Hi-Wall Split AC(130 V to 270V) , 5 KVA Stabilizer fo Cassette AC - Supply and Installation of 5 KVA Stabilizer for 2.0 TR Hi-Wall Split AC(130 to 270 V) , Additional Drain water Pipe - Supply and Installation of additional drain water UPVC pipe for properly connecting to the drain Point Total Quantity : 122
Contract Date: Ref. Documents Contract Value : 5.75 Lakh
Government Departments No of Bidders 4
Contract Date: Ref. Documents Contract Value : 1.59 Lakh
Government Departments No of Bidders 9
Contract Date: Ref. Documents Contract Value : 3.28 Lakh
Government Departments No of Bidders 3
Contract Date: Ref. Documents Contract Value : 77,800
Government Departments No of Bidders 11
36.
Banking and Finance #10879438 AOC
Bids Are invited for 1.5 Tr Hiwall Type Split Air Conditioners - Supply Of 1.5 Tr Capacity Hiwall Mounting 5-Star Rated Inverter Split Ac With Cordless Remote And Copper Condensor Coil.Ac Make, Voltas/Bluestar /Daikin /Lg/Hitachi ( For Banking Hall)Outdoor Unit Comprising Single Phasehermetically Sealed Scroll / Rotary Compressors, Condenser Coil With Fan & Motor, Starters / Controls / Cutouts / Relays Etc., Mounted Inside A Powder Coated Sheet Metal Cabinet Of 2Mm Thick, Duly Treated For Corrosion Protection Complete, Mounted On Ribbed Rubber Pads. Ac Make, Voltas/Blue Star/Daikin /Lg/Hitachi , 2.0 Tr Cassette Type Split Air Conditioners - Supply Of2.0 Tr Cassettetype 5 Star Rated Inverter Air Conditioners Withcopper Condensor Coil And Refrigerant (R32 Or R 410A) Indoor Unit Ceiling Hung Comprising Cooling Coil, Evaporator Fan With Motor, Filters, Insulated Drain Pan, Drain Pump, Expansion Valve, Refrigerant Filter Drier With Codeless Remote Control Unit, Etc. Outdoor Unit Comprising Single Phasehermetically Sealed Scroll / Rotary Compressors, Condenser Coil With Fan & Motor, Starters / Controls / Cutouts / Relays Etc., Mounted Inside A Powder Coated Sheet Metal Cabinet Of 2Mm Thick, Duly Treated For Corrosion Protection Complete, Mounted On Ribbed Rubber Pads. Ac Make, Voltas/Blue Star/Daikin /Lg/Hitachi , Installation Charges Of The 1.5 Tr Split Ac - Installation Charges Of The 1.5 Tr Hiwall Split Ac Including Outdoor Frame / Stands Towithstand The Full Load Of Outdoor Units And Making Good All The Damage. , Installation Charges Of The 2.0 Tr Cassette Ac - Installation Charges Of The 2.0 Tr Cassette Type Split Ac Including Outdoor Frame / Stands Towithstand The Full Load Of Outdoor Units And Making Good All The Damage. , Copper Pipe - For 1.5 Trtr Hi-Wall Type Split Air Conditioners Supply And Laying Of Copper Pipes, Drain Pipes Covered With Gi Pipes Wherever Necessary Copper Wiring In Gi Conduits Neatly Drawn In Professional Manner From Power Points To Outdoor /
Contract Date: Ref. Documents Contract Value : 9.29 Lakh
Government Departments No of Bidders 5
Contract Date: Ref. Documents Contract Value : 15.57 Lakh
Government Departments No of Bidders 9
38.
Educational and Research Institute #10842107 AOC
Bids Are Invited For Rotary Evaporator Total Quantity : 1
Contract Date: Ref. Documents Contract Value : 11.98 Lakh
Boards / Undertakings / PSU No of Bidders 6
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
41.
Drinking Water Supply and Sanitation #10700958 Price Bid
Supply Of Water Quality Testing Goods / Equipment-1 A ) Gas Chromatograph Mass Spectrometer ( Gcms ) * And Rotary Evaporator 2 Installation And Demonstration Of Full Operation Of The Equipment Free Of Cost. 3 Furnishing Of Detailed Operations And Maintenance Manual For Each Appropriate Unit Of Supplied Goods Free Of Cost. 4 Comprehensive Annual Maintenance Charges ( Camc ) After Completion Of Five-Year Standard Warranty Period: 5 1St Year Camc Price 6 2Nd Year Camc Price 7 3Rd Year Camc Price 8 Training For 2-3 Persons For A Week ( Twice ) Within A Gap Of Six Months For Operation And Maintenance At Installation Site Free Of Cost. 9 Training For 5-10 Persons For 2-3 Days In Respective Organization For Operation And Maintenance Etc ( 2 Nos During Warranty Period And 1 No During Amc Period ) 10 Supply Of Consumables Along With Instrument At The Time Of Delivery: 11 A )        Filament, High Temperature Ei For Gcms 12 B )       Septa Non-Stick Bto Inlet 11Mm 100 Pk 13 C )        Septa Non-Stick Bto Inlet 11Mm 50 Pk 14 D )       Graphite O-Ring For Splitless, 10 / Pk 15 E )        Liner, Ui, Split, Straight, Glass Wool, 5 / Pk 16 F )         Liner, Ui, Splitless, Single Taper, Gw, 5 / Pk 17 G )       Ferrule, 0.5Mm Vg 0.32 Col 10 / Pk 18 H )       Ferrule, 0.4Mm Vespel 0.1-0.25 Col 10 / Pk 19 I )         Ferrule, 0.5Mm Vespel 0.32 Col 10 / Pk 20 J )         Column Nut, Inlet / Detect 21 K )       Glass Wool, Silane-Treated, 50 Grams 22 L )         Auto Sampler Clear Vials With Cap And Septa ( 100 Nos. ) 23 M )     Column: Db-5Ms 30M, 0.25Mm, 0.25Um 24 N )       Column: Cp-Wax 51 For Amines 25Mx 0.25Mm X 0.2Um 25 O )       Column: Db-5 30M, 0.25Mm, 0.25U 26 P )       Column: Db-1Ms Ultra Inert 30M, 0.25Mm, 0.25Um 27 Q )       Syringe, 5.0 Ul Fn 26 G Bevel Tip 28 R )         Auto Sampler Syringe 29 S )        Syringe, 10Ul Ptfe Tip, Fn 23-26 / 42 / Hp 30 T )         Electron Multiplier Horn, High Gain 31 U )       Pftba Sample, 10 G 32 V )       Heater / Sensor Assembly 33 W )      Split Vent Trap Pm Kit, Single Cartridge 34 B ) Induced Coupled Plasma Mass Spectrometer ( Icp-Ms ) Ans Microwave Digestion System 35 Installation And Demonstration Of Full Operation Of The Equipment Free Of Cost. 36 Furnishing Of Detailed Operations And Maintenance Manual For Each Appropriate Unit Of Supplied Goods Free Of Cost. 37 Comprehensive Annual Maintenance Charges ( Camc ) After Completion Of Five-Year Standard Warranty Period: 38 1St Year Camc Price 39 2Nd Year Camc Price 40 3Rd Year Camc Price 41 Training For 2-3 Persons For A Week ( Twice ) Within A Gap Of Six Months For Operation And Maintenance At Installation Site Free Of Cost. 42 Training For 5-10 Persons For 2-3 Days In Respective Organization For Operation And Maintenance Etc ( 2 Nos During Warranty Period And 1 No During Amc Period ) 43 Supply Of Consumables Along With Instrument At The Time Of Delivery: 44 A )       Ion Lenses Or Equivalent 45 B )      Plasma Torch 46 C )        Rf Coil Or Equivalent Accessory 47 D )       Injector Quartz Torch 48 E )       Spray Chamber 49 F )        Skimmer Cone ( Ni And Pt ) 50 G )       Sampler Cone ( Ni And Pt ) 51 H )       Tubing For Sample Introduction, Drain And Internal Standard 52 I )        Nebulizer 53 J )         Hyper-Skimmer Cone / Extraction System For High Matrix And Higher Sensitivity / Ion Lenses 54 K ) Rotary Pump Oil Packets Should Be Provided For Complete Warranty Period Of Operation. 55 L ) Chiller Coolant Should Be Provided For Complete Warranty Period Of Operation. 56 M ) Screw / Nut / Spaces / O Ring For Icp-Ms 57 N )      Shield Torch 58 The Following Additional Spares Should Be Supplied Along With The System: ( A ) Torch Kits- 2 Nos; ( B ) Alumina Injector- 2 Nos ( C ) Quartz Injector – 1 Nos ( D ) Sapphire Injectors- 1 Nos ( E ) Spare Nebulizer / Spray Chamber – 2Nos; ( F ) Sample Introduction Kit. 1-Nos ( G ) Auto Sampler Tubings – 24 Nos . Inclusive Of All Parts. Vendor Should Supply Suitable Chiller Re-Circulator Of Appropriate Capacity Along With The System With Warranty Of Minimum 5 Years. Air Compressor And Purification Panels For Argon And Nitrogen Should Be Included. The Vendor Should Take Care Of The Installation Of Ducting From The Gas Cylinders To The Instrument. Hydride Generator Kit Should Be Included For Hydride Forming Elements Like As, Hg,
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
43.
Heavy Industries and Public Enterprises #10665970 Price Bid
Supply Of Laboratory Equipments:-1 Pc Base Atomic Absorption Spectrophotometer With Six Lamp Turret, Auto Gas Ignite & Shut Off, Compressor, Assembly Of Acetylene Regulator & Burner With Hand Held Terminal Thermo Make Model Make With Hcl Lamps Cu, Mn, Zn, Fe Wavelength Range 190 To 900 Nm Photometric Range -0.301 To 2.0 Abs Photometric Accuracy ±0.001 Abs @ 1 Abs Detector High Performance Photomultiplier Bandwidth Variable 0.1 To 2.0 Nm In Steps Of 0.1Nm 2 Flame Photometer With Na, K Filter With Air Compressor Na & K Filter Range : Na, K, - 1 To 100 Ppm, Linearity : 2% 3 Ph Meter : Range 0 To 14 Ph, Resolution : 0.01, Temp : 0 To 100 C Manual With Electrode, Stand & Buffer 4 Conductivity Meter : Range 0 To 200 Ms, Resolution : 0.01, Temp : 0 To 100 C Manual With Cell Constant 1.00 & Stand 5 Digital Balance 0.01 Accuracy Max 300G 6 Visible Spectrophotometer Range 340-1000Nm With Two Pair Of Cuvette. Photometric Range : 0 To 1.99 Abs Photometric Accuracy ±0.01 Abs @ 1 Abs Detector Photodiode Bandwidth : 5Nm Display : Lcd 7 Oven 8 Analytical Balance Accuracy 0.001 G Max 220G, Lcd Display 9 Hot Plate Size : 8 Inch Round 10 Mono Quartz Distillation Unit, Vertical Quartz Boiler & Borosilicate Condenser, 5 Lit Per Hr With Power Supply 11 Muffle Furnace : Bti Muffle Furnace 22.5 X 10 X 10 Cm, Outer Wall Made Up Of Thick Ms, Working Temp. 9000C Maximum Temp. 10000C, Fitted With Energy Regulator, Thermocouple 12 Magnetic Stirrer One Liter Capacity 13 Shaker 24 Flask Capacity 250 Ml With Digital Rpm Display 14 Centrifuge With 8 X 15 Angle Head & 15Ml Tapered Bottom Tubes 15 Trinacular Research Microscope With Digital Camera 16 Evaporator Rotary Type With Heating Mantle & Vertical Condenser, Manual Type 17 Water Boiler ( Heating Mantle ) 1 Liter Capacity With Regulator 18 Autoclave Vertical Size 12 X 20Ft, Rating 2000Kw, Capacity 35 Liter, Steam Pressure At 15 Psi, Double Wall Complete Ss 19 Bod Incubator Size 50 X 50 X 70, 170 Ltr, 2 Shelves, Ss Chamber 20 Nitrogen Analyzer Distillation & Digestion Unit 21 Horizontal Laminar, Air Flow Area 3 X 2 22 Glassware & Chemicals:-1 Charcoal Activated A.R. Phosphorous Free 250Gm- Nice 2 Ammonium Acetate L.R. 500Gm Nice 3 Charcoal Activated L.R. 250Gm-Nice 4 Ammonium Chloride L.R. 500Gm Nice 5 Azomethine-Ar -5Gm-Nice 6 Barium Chloride A.R. 500Gm-Nice 7 Boric Acid A.R. 500Gm Nice 8 Buffer Powder Ph 4.0 10Cp-Nice 9 Buffer Powder Ph 7.0 10Cp-Nice 10 Buffer Powder Ph 9.2 10Cp-Nice 11 Calcium Sulphate Dihydrate L.R. 500Gm Nice 12 Calcium Chloride Dihydrate L.R. 500Gm Nice 13 Diethyl Enetruanube Pentaacetic Acid ( Dtpa ) - Ar-500Gm-Spectrochem 14 Erichrome Black T 100Gm / Spectrochem 15 Edta Disodium Salt A.R. 100Gm Nice 16 Ethanol Ar-500Ml-China 17 Ammonium Ferrous Sulphate A.R. 500Gmnice 18 Ferrous Sulphate L.R. 500G Nice 19 Acetic Acid Glacial A.R. 500Ml Nice 20 Gum Acacia 500Gm Nice 21 Hydrochloric Acid A.R. 500Ml Nice 22 L-Ascorbic Acid A.R-100Gm-Nice 23 Potassium Dichromate L.R. 500Gm Nice 24 Potassium Sulphate L.R. 500Gm Nice 25 Antimony Potassium Tartrate L.R. 250Gmnice 26 Sodium Bicarbonate L.R. 500Gm-Nice 27 Sulphuric Acid L.R. 5Ltr-Nice 28 Triethanolamine L.R. 500Ml-Nice 29 Micropipette Fixed Vol. 10Ul-Microlit 30 Micropipette Fixed Vol. 5Ul-Microlit 31 Micropipette Fixed -1Ml-Microlit 32 Conical Flask 100Ml-Ng6504-Nice 33 Conical Flask Narrow Mouth250ml Ng6506-Nice 34 Conical Flask 500Ml-Ng6507-Nice 35 Measuring Cylinders, Round Base With Spout, Class B, -10Ml-Nice 36 Measuring Cylinder Class B, 100Ml-Ng5655-Nice 37 Measuring Cylinder 25Ml-Ng-5653-Nice 38 Measuring Cylinders-50Ml- Ng 5654 –Nice 39 Measuring Cylinder Round Base 500Ml-Nice 40 Volumetric Flask-25Ml Glass B-Nice-Ng6803 41 Volumetric Flask-100Ml-Class B-Nice-Ng6805 42 Volumetric Flask-250Ml-Class B-Nice-Ng 6807 43 Volumetric Flask-500Ml-Class B-Nice-Ng 6808 44 Funnel-2 ( 50Mm ) -Tarsons 45 Wash Bottle ( New Type ) - 500 Ml-Tarsons 46 Tissue Paper Roll 47 Filter Paper No-1-Size-46 X 57- ( 100 Sheets ) -Sonar 48 Filter Paper No-42 Size-12.5Cm- ( 100Circles ) Whatman
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
Maharashtra View Result →
44.
Educational and Research Institute #10636085 Price Bid
Supply Of Food Testing Lab Items-2 1.01 Desiccator (Glass) (Spcification as per Annexure H) item1 2 Nos 3 1.02 Desiccator (Plastic) (Spcification as per Annexure H) item2 2 Nos 4 1.03 Pocket Size pH meter (Spcification as per Annexure H) item3 1 Nos 5 1.04 Pocket Refractometer (0-32 Brix) (Spcification as per Annexure H) item4 1 Nos 6 1.05 Pocket Refractometer (0-10 Brix) (Spcification as per Annexure H) item5 1 Nos 7 1.06 Pocket Refractometer (58-92 Brix) (Spcification as per Annexure H) item6 1 Nos 8 1.07 Lab Penetrometer Plunger Weight 47.5g (Spcification as per Annexure H) item7 1 Nos 9 1.08 Magnetic Stirrer with Hot Plate (2 liter Capacity) (Spcification as per Annexure H) item8 1 Nos 10 1.09 Mixer and grinder set (Including all accessories and mixer, juicer and grinder) (Spcification as per Annexure H) item9 1 Nos 11 1.1 Electric Whisk (Spcification as per Annexure H) item10 1 Nos 12 1.11 Cooking Range (4 Burner) • 4 Burners Glass Cooktop (Spcification as per Annexure H) item11 1 Nos 13 1.12 Juice Press Juicer (Electric) Applicable Fruits Pomegranate, Mosambi, Sugarcane, Apples, Oranges (Spcification as per Annexure H) item12 1 Nos 14 1.13 Digital Weighing Balance (Upto 25 kg) Sales Package (Spcification as per Annexure H) item13 1 Nos 15 1.14 Heavy Duty Food Processor (700WT) (Spcification as per Annexure H) item14 1 Nos 16 1.15 OTG • Multi functional modes, digital display panel (Spcification as per Annexure H) item15 1 Nos 17 1.16 Hand Sew Machine (Spcification as per Annexure H) item16 2 Nos 18 1.17 Deep Fat Fryer Electric (Spcification as per Annexure H) item17 1 Nos 19 1.18 Sealing Machine (16 inch) (Spcification as per Annexure H) item18 1 Nos 20 1.19 Glass Butyrometer (for Dairy and Milk testing) (Spcification as per Annexure H) item19 10 Nos 21 1.2 Gerber Butyrometer centrifuge (Spcification as per Annexure H) item20 1 Nos 22 1.21 Lactometer (for Dairy and Milk testing) (Spcification as per Annexure H) item21 2 Nos 23 1.22 Ice cream Machine 1.5 liter (Spcification as per Annexure H) item22 1 Nos 24 1.23 AIR CONDITIONER (2.0 TONN) (Spcification as per Annexure H) item23 3 Nos 25 1.24 ALOE VERA PROCESSING PLANT (Spcification as per Annexure H) item24 1 Nos 26 1.25 AMLA JUICE EXTRACTOR (Spcification as per Annexure H) item25 1 Nos 27 1.26 AMLA PUNCHING MACHINE (Spcification as per Annexure H) item26 1 Nos 28 1.27 AMLA STONE REMOVER CUM SHREDDING MACHINE (Spcification as per Annexure H) item27 1 Nos 29 1.28 ANALYTICAL WEIGHTING BALANCE (Spcification as per Annexure H) item28 1 Nos 30 1.29 BOD INCUBATOR (Spcification as per Annexure H) item29 1 Nos 31 1.3 BAKING OVEN ELECTRIC 2 DECK 4 TRAY (Spcification as per Annexure H) item30 1 Nos 32 1.31 BREAD PROOFER (Spcification as per Annexure H) item31 1 Nos 33 1.32 COMMERCIAL VEGETABLE CUTTER (Spcification as per Annexure H) item32 1 Nos 34 1.33 Deep Freezer (Spcification as per Annexure H) item33 2 Nos 35 1.34 DIGITAL PH, CONDUCTIVITY AND TEMPERATURE METER (Spcification as per Annexure H) item34 1 Nos 36 1.35 DIGITAL TRAY DRYER (Spcification as per Annexure H) item35 1 Nos 37 1.36 DOMESTIC FLOUR MILL (Spcification as per Annexure H) item36 1 Nos 38 1.37 DOUBLE DISTILLATION PLANT QUARTZ (Spcification as per Annexure H) item37 1 Nos 39 1.38 DOUGH MIXER (COMMERCIAL-TRIPLE BLADE) (Spcification as per Annexure H) item38 1 Nos 40 1.39 Digital Melting Point Apparatus (Spcification as per Annexure H) item39 1 Nos 41 1.4 DISH WASHER (Spcification as per Annexure H) item40 1 Nos 42 1.41 DRINKING WATER COOLER (Spcification as per Annexure H) item41 1 Nos 43 1.42 FIBRA PLUS UNIT (Spcification as per Annexure H) item42 1 Nos 44 1.43 FLOUR TESTER MACHINE (Flour Sifter) (Spcification as per Annexure H) item43 1 Nos 45 1.44 FULLY AUTOMATIC Autoclave (VERTICAL) (Spcification as per Annexure H) item44 1 Nos 46 1.45 GLASS BOTTLE STERILIZER (Spcification as per Annexure H) item45 1 Nos 47 1.46 HOT PLATE (Spcification as per Annexure H) item46 2 Nos 48 1.47 Hot air oven (Spcification as per Annexure H) item47 2 Nos 49 1.48 HPLC SYSTEM Gradient (Spcification as per Annexure H) item48 1 Nos 50 1.49 ICE flaking machine (Spcification as per Annexure H) item49 1 Nos 51 1.5 INCUBATOR SHAKER (Spcification as per Annexure H) item50 1 Nos 52 1.51 KJELDHAL DISTILLATION & DIGESTION UNIT COMBINED WITH ENERGY REGULATORS (Spcification as per Annexure H) item51 1 Nos 53 1.52 LAMINAR AIR FLOW WORK STATION (Spcification as per Annexure H) item52 1 Nos 54 1.53 MICROWAVE OVEN (20-25 LITER) (Spcification as per Annexure H) item53 1 Nos 55 1.54 MULTIPURPOSE CUP SEALING MACHINE (Spcification as per Annexure H) item54 1 Nos 56 1.55 MOISTURE BALANCE (Spcification as per Annexure H) item55 1 Nos 57 1.56 MUFFLE FURNACE (Spcification as per Annexure H) item56 1 Nos 58 1.57 POMEGRANATE DESEEDER AND JUICER (Spcification as per Annexure H) item57 1 Nos 59 1.58 REFRIGERATED CENTRIFUGE (Spcification as per Annexure H) item58 1 Nos 60 1.59 Refrigerator (Spcification as per Annexure H) item59 3 Nos 61 1.6 Rotary Vacuum Evaporator (Spcification as per Annexure H) item60 1 Nos 62 1.61 SEMI AUTOMATIC BOTTLE WASHING MACHINE (Spcification as per Annexure H) item61 1 Nos 63 1.62 SEMI AUTOMATIC PUFF FOOD MAKING PLANT (Spcification as per Annexure H) item62 1 Nos 64 1.63 SHRINK WRAPPING MACHINE 14 PPM (Spcification as per Annexure H) item63 1 Nos 65 1.64 SOLAR DRYER (20KG) (Spcification as per Annexure H) item64 1 Nos 66 1.65 SOXHLET EXTRATION UNIT WITH ENERGY REGULATORS (Spcification as per Annexure H) item65 1 Nos 67 1.66 Spectrophotometer (Spcification as per Annexure H) item66 1 Nos 68 1.67 SPICE GRINDING MACHINE (Spcification as per Annexure H) item67 1 Nos 69 1.68 STEAM DISTILLATION UNIT (OIL EXTRACTOR) (Spcification as per Annexure H) item68 1 Nos 70 1.69 TEXTURE ANALYSER (Spcification as per Annexure H) item69 1 Nos 71 1.7 TINTOMETER (Spcification as per Annexure H) item70 1 Nos 72 1.71 VACUUM PACKAGING MACHINE (Spcification as per Annexure H) item71 1 Nos 73 1.72 WATER BATH FULLY AUTOMATIC (Spcification as per Annexure H) item72 1 Nos 74 1.73 WATER PURIFICATION SYSTEM (Spcification as per Annexure H) item73 1 Nos 75 1.74 WATER PURIFIER (Spcification as per Annexure H) item74 2 Nos
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
Uttar Pradesh View Result →
49.
Educational and Research Institute #10592884 Price Bid
Supply And Installation Of Laboratory Equipment At The College Of Climate Change And Environmental Science Kerala Agricultural University Thrissur-2 Stereo Microscope 3 APM 586 4 APM 460 PUF 5 Greenhouse gas analyzer 6 TOC Analyser - Rotary 7 Rotary Evaporator 8 Water Depth Sampler 9 Thermal Cycler 10 Stereo Microscope 11 Double distillation unit 12 Gel documentation system 13 Vortex shaker 14 Vacuum Desiccator 15 Gel Electrophoresis with power supply unit 16 Laminar Airflow Chamber 17 BOD incubator 18 Refrigerator 19 Nanodrop 20 Deep Freezer -40° C(vertical) 21 Electrophoresis Apparatus 22 Automatic vertical autoclave 23 Microwave oven 24 Ultra high speed centrifuge 25 Hotplate Magnetic stirrer 26 Tensiometer 27 Electrical resistance meter 28 INDUCTIVELY COUPLED PLASMA MASS SPECTROMETER (ICP-MS) 29 CHNSO Analyzer 30 Hot plate 31 Compound LED Microscope 32 Compound Light Microscope 33 Nephloturbiditimeter 34 Sound level meter 35 Muffle Furnace 36 Heating mantle [3-Unit Heating Mantles (High Temperature)] 37 COD digester apparatus 38 Orbital shaker cum Incubator 39 Secchi disc 40 Core sampler 41 Soil auger 42 REAL TIME PCR 43 Bio Safety Cabinet Class II Type B2 44 Labblender (Paddle Type) 45 Analytical Balance – 3 decimal 46 Hot air Oven 47 High Performance Liquid Chromatograph 48 UV-VIS Spectrophotometer 49 Digital Bomb calorimeter 50 Analytical Weighing Balance - 5 decimal 51 DRMPE- 6000 multiparameter water quality analyzer 52 Weighing balance 53 Double Beam Atomic Absorption Spectrophotometer (AAS) for Metal Analysis 54 Sieve Shaker Wet Yoder Type for 4 set of sieves 55 Pressure plate apparatus 56 Soil Hydrometer with Hydrometer Jar 57 Munsell colour chart 58 Micro Centrifuge 59 Water bath 60 Soxhlet Extraction Unit 61 Ultrasonic probe sonicator 62 Stereo Microscope 63 Kel Plus Automatic Eight Place Digestion System 64 Garmin GPS 65 Range finder 66 Digital clinometer 67 POCKET STEREOSCOPE Stereo 68 Canopy analyser
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 14
TenderDetail
Loading tenders