View Bid Results For Psc Pipe Tenders

We found 889 Bid Results related to psc pipe tenders. You can find Contractor details who won psc pipe tenders along with contract details in Bid awards announcements section.

Indian Tenders
18
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
517
218
154
Tender Publishing Platform
14
875
State / UT
23
254
196
132
60
48
39
28
26
19
15
14
13
9
8
7
7
4
3
2
2
1
1
1
Contract Value
389
233
178
86
Publish Date
0
0
0
0
0
Sector
18
267
163
161
90
90
27
25
18
15
12
6
3
3
3
2
2
1
1
Ownership
4
320
292
260
17
Within keyword
Active filters:
Showing 1–18 of 889 tenders matching your filters
Telangana View Result →
2.
Public Administrative Department #11470143 AOC
Supply And Delivery Of Led Spare Material To The Municipal Store Under Mgf In Nalgonda Municipality-1. RAW WATER INLET AND CASCADE AERATOR a) C.I. Sluice valve of 450 mm dia with necessary tailpieces complete. b) Pedestal type flow meter 0 to 12 mld (Integrated, reading and recording type preferably Mahendra&Mahendra) 2. CHEMICAL DOSING EQUIPMENT a) Alum dosing mechanisms b) Alum Dissolving – Mechanism for each of Alum Solutions tanks – 4 Nos. c) Alum Solution feed pipe arrangements complete along with control valve. d) Platform weighing machine of 500 Kg capacity 3. FLASH MIXER CHAMBER: a) Mechanism for instantaneous mixing of Alum solution with raw water. b) Gravity type desludge mechanism up to disposal point 4. CLARIFLOCULATOR: a)Central Mechanism for Driving Bridge over rails motors and fabrication of walkways with hand rails b) Mechanism for flocculation and raking in the flocculation compartment with driving motors c) Mechanism for raking in clarifier compartment d) Central scrapper frame with brushes. e) Sludge discharge device with a minimum size of 250 mm dia CI pipe, sluice valve along with necessary pipe connections etc., for complete with telescopic desludging. 5. FILTRATION PLANT a) Filter media of gravel and sand of suitable characteristics b) Filter under drainage system of suitable capacity c) Wash water and waste water gutters and appurtenances. d) The influent and effluent pipe gallery together with valves, inlet and out let connections including all appurtenances. e) Automatic rate of flow controller for each filter bed. 5. f) Rate flow gauge for each filter bed for inlet and out let. g) Loss of head gauge for each filter bed h) Air blower of suitable capacity along with air pipe system complete for air scour. i) Back wash arrangements complete with water main. j) (i) Wash water pumpsets of suitable capacity (centrifugal) in duplicate with connections suitable capacity and suction delivery connections (ii) Wash water tank pipe connections, control valves and controllers etc., complete. k) Surface wash system comprising of necessary pipe connections, controls etc., complete. l) Bypass arrangements to feed filter beds directly including necessary pipe connections diversion arrangements etc., complete. m) Suitable length of 600 mm dia PSC 6 KSC class clear water main from filtration plant outlet upto inlet of clear water sump with valves specials etc., n) All the jointing material suitable bolts, washers, should be provided with GI materials. 6. Isolated CHLORINATION EQUIPMENT a) Gravity type gaseous chlorinator of capacity 0-3 Kg/Hr. b) Solution feed equipment with pipe line control valves and other fittings etc., complete. c) Spares for Chlorination equipment d) Platform scale type weighing machine of 1000 Kg capacity 7. LABORATORY EQUIPMENT a) Comparator test set for measurement of residual Chlorination using chloro-scope. b) P.H. Test kit with different discs for measurement for PH c) Jar test apparatus for determining optimum alum dosage d) Turbidity meter e) Analytical balance with weights box. f) Fume cup board g) Conductivity meter h) Equipment and reagents required for analysing alum percentage in the ferric alum. i) Test bench fully equipped with glass apparatus for sampling and testing of water before and after treatment j) Equipment and reagents required for analysing chlorine percentage in bleaching powder. k) Necessary furniture: (i) Wooden Stools (ii) Wooden Almarah (Big Size) 8. a) Erection and testing charges of the plant and the equipment supplied under item No. 1 to 7 b) Trail run and maintenance charges for a period of 90 days including all labour charges and chemicals & consumables and water will be supplied free of cost by the department during this period, (The rate of 8.a. and 8.b. be shown separately) Testing of the treated water and comparing with National Standards. 9. SPARES AND WORKING TOOLS: Necessary spares and working tools required for normal working of the plant for a period of 3 years with list of tools proposed to be supplied. NOTE: The inlet and outlet control system of the whole plant should be capable of taking an over load of 25% and Filter losses of 5% for 23.50 working hours per day over the stipulated capacity.
Contract Date: Ref. Documents Contract Value : ₹ 13.37 Lakh
Local Bodies No of Bidders 1
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
8.
Housing Urban and Rular Development #11419402 Technical Bid
Tender for Interconnection Work Between 750 Mm Dia Psc Pipe And 160 Mm Dia (Od) Hdpe Pipe With Valve At Pokepari More For The Water Crisis Area Of Ward No. 12 Under Budge Budge Municipality.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
14.
Drinking Water Supply and Sanitation #11368600 AOC
Replacement Of Psc Pipe Line In Between Ch.No. 423.00 To 424.00 With Ms Pipe Line On Phase-Iii Gravity Main Of 1200Mm Dia From Singapur To Lingampally Under Singapur Section, Sub-Division Iii, O&M Division Viii, Patancheru
Contract Date: Ref. Documents Contract Value : ₹ 28.67 Lakh
Government Departments No of Bidders 1
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
20.
Public Administrative Department #11320409 Technical Bid
Tender for Strengthening Of 1500Mm Dia Psc Filter Water Pipe Line Near Hotel Management Campus Gate Beside Air Valve On Taratala Road Road With Other Allied Works.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
21.
Public Administrative Department #11320407 Technical Bid
Tender for Strengthening Of 1600Mm Dia And 900Mm Dia Psc Ss Fw Pipe Line At Jinzira Bazar Junction And Webel Human Resource Development Center On Taratala Road.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
22.
Public Administrative Department #11320403 Technical Bid
Tender for Supply Fitting-Fixing Of Ms Cleat On 900Mm Dia Psc, Ss Filter Water Pipe Line In Front Of Mint Gate On Dimond Harbour Road
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
Telangana View Result →
Kerala View Result →
25.
Public Administrative Department #11230922 Technical Bid
Tender for Leakage Repairing Of 600 Mm Dia Psc Pipe Line With Replacement Of 600 Mm Dia M.S. Pipe In Front Of Panki Dham Near Police Chauki Kanpur.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
26.
Power #11202992 Technical Bid
Tender for Summary Of Quoted Price (Schedule-A) Schedule Of Quantities And Prices For Design, Engineering, Supply Of Materials/ Equipments, Erection, Testing & Commissioning For Diversion Of 132 Kv Hatia - Ptps 8C & 9C Transmission Line On 220 Kv Multi Ckt. Tower From Location No. 115 To 400/220/132/33 Kv Gss Katia (Patratu) From Pvunl Premises And Dismantling Of Old Route (8C & 9C) Tower From Location No. 116 To 136 On Turnkey Basis. Tender Inviting Authority: General Manager, C&M (Nwbp), Jusnl, Ranchi Nit No. 805/Pr/ Jusnl/ 2025-26 Name Of Bidder Sl. No. Description Total Supply Inlcuding All Taxes Total Erection Inlcuding All Taxes Total , Design, Engineering, Supply Of Materials/ Equipments, Erection, Testing & Commissioning For Diversion Of 132 Kv Hatia - Ptps 8C & 9C Transmission Line On 220 Kv Multi Ckt. Tower From Location No. 115 To 400/220/132/33 Kv Gss Katia (Patratu) From Pvunl Premises And Dismantling Of Old Route (8C & 9C) Tower From Location No. 116 To 136 On Turnkey Basis. Schedule - A (Supply) Schedule Of Quantities And Prices For Design, Engineering, Supply Of Materials/ Equipments, Erection, Testing & Commissioning For Diversion Of 132 Kv Hatia - Ptps 8C & 9C Transmission Line On 220 Kv Multi Ckt. Tower From Location No. 115 To 400/220/132/33 Kv Gss Katia (Patratu) From Pvunl Premises And Dismantling Of Old Route (8C & 9C) Tower From Location No. 116 To 136 On Turnkey Basis. Tender Inviting Authority: General Manager, C&M (Nwbp), Jusnl, Ranchi Nit No. 805/Pr/ Jusnl/ 2025-26 Name Of Bidder Item No. Brief Description Of Work Unit Qty. Unit Supply Rate Including All Taxes & Levies Total Supply Item Cost Including All Taxes & Levies , Fabrication, Galvanizing And Supply Of Various Type Of Tower & Tower Parts, Tower Extensions (Complete) Excluding Bolts & Nuts, Step Bolts And Stubs But Including Hanger, D-Shackles Pack Washer Including Stub Etc. (I) Normal Tower (A) Ht Steel Mt 294.0 0.0 (B) Mild Steel Mt 290.0 0.0 , Fabrication, Galvanizing And Supply Of Stubs & Cleats For Various Type Of Tower , Tower Extensions (Complete) With Pack Washer, Excluding Bolts & Nuts. (I) Ht Steel Mt 27.8 0.0 (Ii) Mild Steel Mt 10.7 0.0 , Mono Pole Multi Circuit (I) D Type + 6 Meter Extension Set 2.0 0.0 (Ii) C Type + 3 Meter Extension Set 1.0 0.0 , Supply Of Bolts & Nuts Including Step Bolts And Spring Washer (I) Hexagonal Bolts And Nuts Including Step Bolts + Bolts And Nuts For Stubs Mt 16.0 0.0 , Earthing Of Tower (I) Pipe Type Earthing Nos. 28.0 0.0 , Tower Accessories (I) Danger Plate Nos. 28.0 0.0 (Ii) Number Plate Nos. 28.0 0.0 (Iii) Phase Plate (Set Of Three) Sets 112.0 0.0 (Iv) Circuit Plate (Set Of Two) Sets 56.0 0.0 (V) Anti-Climbing Device Nos. 28.0 0.0 (Vi) Bird Guard (Set Of Three) Sets 28.0 0.0 , Long Rod Insulators (I) Long Rod Polymer Insulator 70 Kn Of Light Weight Set 100.0 0.0 (Ii) Long Rod Polymer Insulator 90 Kn Of Light Weight Set 696.0 0.0 , Single Suspension I Hardware Fitting For Acsr Panther Conductor , Single Suspension Pilot Hardware Fitting For Acsr Panther Conductor , Single Tension Hardware Fitting For Acsr Panther , Double Tension Fittings For Acsr Panther , Supply Of Acsr Panther Conductor For 3 Phase Double Circuit Transmission Line , Gi Earth Wire (I) Gi (7/10) Swg Earth Wire Km 5.0 0.0 , Gi Earth Wire Accessories (I) Mid Span Compression Joint For Earthwire Nos. 20.0 0.0 (Ii) Flexible Copper Bonds For Earthwire Nos. 30.0 0.0 (Iii) Vibration Damper For Earthwire Nos. 60.0 0.0 (Iv) Suspension Clamp Assembly For Earthwire Set 15.0 0.0 (V) Tension Clamp Assembly For Earthwire Set 25.0 0.0 , Accessories For Acsr Conductor And Earth Wire (I) Mid Span Compression Joint For Acsr Panther Conductor Nos. 65.0 0.0 (Ii) Repair Sleeve For Acsr Panther Conductor Nos. 45.0 0.0 (Iii) Vibration Damper For Acsr Panther Conductor Nos. 700.0 0.0 (Iv) Vibration Damper For Opgw Nos. 60.0 0.0 (V) Joint Box For Opgw Nos. 4.0 0.0 Total Supply Cost 0.0 Schedule - A (Erection) Schedule Of Quantities And Prices For Design, Engineering, Supply Of Materials/ Equipments, Erection, Testing & Commissioning For Diversion Of 132 Kv Hatia - Ptps 8C & 9C Transmission Line On 220 Kv Multi Ckt. Tower From Location No. 115 To 400/220/132/33 Kv Gss Katia (Patratu) From Pvunl Premises And Dismantling Of Old Route (8C & 9C) Tower From Location No. 116 To 136 On Turnkey Basis. Tender Inviting Authority: General Manager, C&M (Nwbp), Jusnl, Ranchi Nit No. 805/Pr/ Jusnl/ 2025-26 Name Of Bidder Item No. Brief Description Of Work Unit Qty. Unit Erection Rate Including All Taxes & Levies Total Erection Item Cost Including All Taxes & Levies , Survey & Soil Investigation (I) Detailed Complete Survey Works Including Preliminary Survey, Profiling, Tower Spotting & Check Survey, Submission Of Survey Sheets Including Soil Investigations. Km 4.2 0.0 (Ii) Soil Investigation In All Kinds Of Soil Except Hr & Fr. Location 10.0 0.0 (Iii) Proto Assembly Charges For Narrow Multi Circuit Tower L.S. 3.0 0.0 , Work Associated With Tower Foundations (I) Excavation & Back Filling Of Excavated Soil For Foundation Works In Various Types Of Soils (B) Wet Soil Cum 1500.0 0.0 (E) Hard Rock Cum 200.0 0.0 , Pile Foundation Upto Ay Depth 1200 Sqmm With Bentonite And M25 , Ms Liner For Pile , Dismentalling Of Pile Cap , Centering Of Pile Cap, Tower Etc. , Concreting (Including All Associated Works Related To Foundation Not Covered In 4.1 & 4.3 (I) M 20 Nominal Concreate Mix 1:1.5:3 Cum 580.0 0.0 (Ii) M 10 Nominal Concreate Mix 1:3:6 Cum 90.0 0.0 , Supply And Placement Of Reinforcement Steel (Fe 500) , Installation Of Stub Including Bolts And Nuts , Erection Of Various Type Of Towers, Tower Parts And Tower Extension (Complete) With Bolts And Nuts, Including Tack Welding And Supply And Application Of Zinc Rixh Primer And Two Coats Of Enamel Paint And Tower Rectification (Cross Arm Change, Missing Psc And Band Pcs Change). (I) Normal Tower Mt 584.0 0.0 , Installation Of Earthing Of Tower (I) Pipe Type Earthing Nos. 28.0 0.0 , Installation Of The Followingtower Accessories (I) Danger Plate Nos. 28.0 0.0 (Ii) Number Plate Nos. 28.0 0.0 (Iii) Phase Plate (Set Of Three) Sets 112.0 0.0 (Iv) Circuit Plate (Set Of Two) Sets 56.0 0.0 (V) Anti-Climbing Device Nos. 28.0 0.0 (Vi) Bird Guard (Set Of Three) Sets 28.0 0.0 , Installation Of Insulator Strings Complete With Arcing Horns & Necessary Hardware, Installing & Stringing Of Conductor Including Fixing Of Conductor Accessories, Installlaing & Stringing Of Earthwire Including Fixing Of Earth Wire Accessories. (I) Normal Tower (A) Stringing Of Panther Conductor Multi Circuit 12 Ph Kms 4.2 0.0 (B) Stringing Of Opgw 48 Fiber With All Hardware. Kms 4.2 0.0 (C) Fixing Of Joint Box For Opgw. Set 4.0 0.0 , Right Of Way (The Rate Is Tentative, Payment Will Be Mabe Subject To The Production Of The Relevent Documents, Strictly As Per Actual) , Erection Of Mono Pole Multi Circuit. , Stringing Of Earthwire Complete In All Respect Including Transporation And Handing Over The Dismantled Materials To Jusnl Store. Annexure - C (Dismantling Of 8C & 9C Transmission Line From Location No. 116 To 136) , Dismentling Of Conductor & Earthwire/Opgw From Old Route Tower Line With All Accessories Complete (06 Nos. Of Panther Conductor). , Dismentling Of Old Route Tower Structure. , Transporation Of Dismentalled Conductor And Earthwire Through (One) Truck From Site To Transmission Central Store, Namkum Including Loading And Unloading, Stacking Etc. All Complete Job. (A) Transporation Of Equipments/ Materials By Small/ Medium Size Truck From Transmission Central Store Namkum And Other Gss/Sites Within 100 Km Radius. Trip 15.0 0.0 (B) Loading, Unloading And Stacking Of Conductor And Earthwire In Store. Mt 7.0 0.0 , Transporation Of Old Route Tower Structure Including Nuts, Bolts And Other Associated Materials At Site, Its Sorting, Stacking And Its Transport From Site To Central Store, Namkum All Complete Job. (A) Transporation Of Equipments/ Materials By Small/ Medium Size Truck From Transmission Central Store Namkum And Other Gss/Sites Within 100 Km Radius. Trip 40.0 0.0 (B) Loading At Site. Mt 160.0 0.0 (C) Unloading At Store Mt 160.0 0.0 Total Erection Cost 0.0
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Jharkhand View Result →
Uttar Pradesh View Result →
Uttar Pradesh View Result →
29.
Power #11177233 AOC
Tender For The Various Dcw Works And Improvement Works In O And M Perambalur Division; 1 Excavation of Pole Pits for poles upto 8.00m length by using JCB/Manual (1.25 X 0.6 X 1.5M) 2 Excavation of Pole Pits for pole above 8.00m length by using JCB/Manual (1.25x06x1.83M) 3 Excavation of Pole Pits in Hard Soil (common to all size of poles) 4 Excavation of Pole Pits in rocky area (common to all size of poles) by blasting / Manual 5 Excavation of Stay pit of 4.5 to 5 depth using JCB / Manual (0.95 X 0.6 X 1.2 M) 6 Excavation of Stay pit in Hard rock soil (0.95 X 0.6 X 1.2 M) 7 Erection of RCC, REC, PSC poles upto 8.00m length by using Crane / Manual 8 Erection of RCC, REC, PSC poles above 8.00m length by using Crane / Manual 9 Erection of metal supports above 9m / RSJ / Rail Pole/Tubular Poles 10 Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc. excluding stay pit excavation 11 Erection of additional Stay in the same stay rod, excluding excavation of stay pit and burial of stay rod. 12 Fixing of V cross arm 3.5feet 13 Fixing of V cross arm4.5 feet 14 Fixing ofV cross arm5.0 feet 15 Fixing of Fixing of LT S phase cross arm 16 Fixing of Fixing of LT 3 phase cross arm 17 Fixing of Fixing of HT / LT Ti fitting 18 Fixing of Fixing of HT PIN insulator with Pin 11 kv 19 Fixing of HT PIN insulator with Pin 22 kv 20 Fixing of HT PIN insulator with Pin 33 kv 21 Fixing of LT PIN insulator with pin 22 Fixing of HT strain disc 11 KV with Metal parts 23 Fixing of HT strain disc 22 KV with Metal parts 24 Fixing of HT strain disc 33 KV with Metal parts 25 Fixing of Tapping cross arm 26 Fixing of Two Tapping cross arm per cut point upto 33 KV line including fixing of Discs,insulators and Jumpering etc.. 27 Fixing of Top Channel 28 Fixing & erection of Cross bracing 29 Fixing of shackle with Metal parts 30 Fixing of Aluminium knob 31 Fixing of HT LAS (3 Nos.) 32 Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor 33 Paving and stringing of conductors ofabove7/2.59 mm ACSR or other equivalent conductor upto 7/3.35mm ACSR or other equivalent conductor 34 Paving and stringing of conductors of7/4.09mm ACSR or other equivalent conductor 35 Paving and stringing of conductors of7/4.72 mm Dog Conductor or other equivalent conductor 36 Releasing and reerection (resagging) of one run of all sizes of conductor 37 Complete Erection of Double Pole Distribution Transformer structureas per TNEB standard likepole pit excavation & erection, stay pit excavation and erection, feeders arrangement, Open type fuse unit,HT / LT LAS and jumpering, 3 Nos Earth pits with earth trough, concreting,coping, Colour washing of RCC poles, Painting of Structure Materials (including cost of paint(red oxide,Aluminium) and distember), Danger Board fixing etc.. (excludingerection of Distribution Transformer) 38 Erection of11 KV/22 KV single pole Structure includingerection of DT complete with centre support with pole pit excavation & erection, stay pit excavation and erection, feeders arrangement, Open type fuse unit, HT /LT LAS and jumpering, 3Nos earth pits with earth trough, structure earthing complete, concerting,coping, colour washing of RCC poles, painting of structure materials (including cost of paint (red oxide,aluminum)and distermber), danger board fixing etc..(exculding erection of distribution transformer) (Data as per Annexure III) 39 Erection of distribution transformer inculding loading of distribution transformer at stores and erection at structure or vice versa. Upto 25 KVA distribution transformer/metering set. 40 Erection of Distribution Transformer including loading of Distribution Transformer at stores and erection at structure or vice versa. Upto 25 KVA to 100 KVA 41 Failed DT replacement below 100 KVA 42 Failed DT replacement 100 KVA and above 43 Erection of DP structure with stay as per TNEB standard including fixing of top channel, cross bracing, HG Fuse Unit, concreting, painting, colour washing etc., With 11 KV AB switch using all types of poles of size 9.14 m and above length 44 Erection of DP structure with stay as per TNEB standard with 22/33 KV AB switch using all types of poles of size 9.14 m and above lenth including fixing of top channel, cross bracing, HG Fuse Unit, concreting, painting, colour washing etc., 45 Erection of single pole DP with completewith earthing 46 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Mass concreting of poles with coping 0.6MX 0.45MX1.25M 47 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Sleeveconcreting with coping 0.6MX 0.6MX0.3M 48 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Stay concreting with coping 0.3M dia and 0.75 long 49 Earthing of poles with GI wires 4 or 6 SWG by coil earthing 50 Provision of spike with earthing arrangement including material (other than clamps & GI wire ) and fabrication 51 Pipie earthing including excavation of earth pit and fixing earth pipe 3 m length 52 Replacing the corroded earth pipes of transformer structure and replacing the earth wire completely with aluminium lugs for termination 53 Replacement of corroded earth pipe 54 Erection of fourth Earth pipe including earthing 55 Loading& unloading of REC, RCC, PSC pole upto 8.00 m length 56 Loading& unloading of All REC, RCC pole above 8.00 m length 57 Loading of Conductor with ramp 58 Unloading of Conductor with ramp 59 Loading of Iron & Steel 60 Unloading of Iron & Steel 61 Loading of line materials (Including Stacking except conductor drum & scrap material) 62 Unloading of line materials (Including Stacking except conductor drum & scrap material) 63 Loading of 11 KV disc 64 Unloading of 11 KV disc 65 Loading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc., 66 Unloading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc., 67 Loading of scrap materials 68 Unloading of scrap materials 69 Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 1.0 KM 70 Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM 71 Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM of lead of every KM 72 Transporting of Distribution Transformer / Line materials from stores to office / site upto 10KM distance by engaging 1 Ton capacity Minidor (Lorry) 73 Transporting of Distribution Transformer / Line materials from stores to office / site Above 10 KM distance by engaging 1 Ton capacity Minidor (Lorry) 74 Provision of guarding with two numbers earth pits excluding stay set erection - gradle guarding including earthing and earth pit excavation without material 75 Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit 76 Dismantling of stay set complete including stay rod 77 Dismantling of conductor ofupto 7/3.35 including transporting the conductors to the nearest road side and stocking in coils 78 Dismantling of conductor ofabove 7/3.35 including transporting the conductors to the nearest road side and stocking in coils 79 Dismantling of Transformer structure materials complete set and transporting the same from the location to the road side 80 Releasing of LT S ph X Arm with all accessories 81 Relaasing of LT 3 ph X Arm with all accessories 82 Releasing of 3 - 6 V Cross Arm/Tapping channal/GuardingX Arm with all accessories 83 Releasing of 4 - 6 andV Cross Arm with all accessories 84 Releasing of5V Cross Arm with all accessories 85 Releasing of Distn.Tr. Only at field - Upto 25 KVA / Metering set 86 Releasing of Distn.Tr. Only at field- Above 25 KVA and upto 100KVA 87 Dismantling of structure poles 88 Painting of iron poles up to 36 ft length with double coats including cost of paint 89 Painting of iron poles up to 40 ft 200/100 length with double coats including cost of paint 90 Painting of structure materials distribution transformers with aluminium paint of structure poles and writing of transformer details (Paint to be supplied by Department) 91 Labour charges for alteration of back clamp 92 Labour charges for alteration of Stay clamp 93 Providing of holes all size angles/Channel upto 3/4 94 Providing of holes all size angles/Channel above 3/4 95 Clearing of tree branches of coconut tree 96 Clearing of tree branches of Neem, Tamarind, Country tree 97 Clearing of karruvelam 98 Converting pin point into cut point in HT Lines 99 Converting pin point into cut point in LT Lines (single / Three phase) 100 Resagging of lines for all sizes cut point location 101 Set right of leaning poles both HT & LT (Pin point ) 102 Set right of leaning poles both HT & LT ( Cutpoint) 103 Replacement of Guy Shackle only in Existing Stay 104 Replacement of 11KV Polymer Pin Insulator 105 Replacement of 22KV Polymer Pin Insulator 106 Replacement of 33KV Polymer Pin Insulator 107 Replacement of 11KV Disc 108 Replacement of 22KV Disc 109 Fencing of Distribution Transformer Structure at Road side- Fabrication and Erection including all materials (Chain link fencing)
Contract Date: May 26, 2026 Contract Value : ₹ 25.00 Lakh
Boards / Undertakings / PSU No of Bidders 2
Tamil Nadu View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
34.
Drinking Water Supply and Sanitation #11151658 AOC
Rectification Of Heavy Water Supply Leakage On Phase-I 1000Mm Dia Psc Main With M.S. Pipe And Specials At Ch. No. 560, Behind Udipi Hotel, Rudraram Under Pipe Line Section. Sd-I And M Div No Viii, Patancheru
Contract Date: Ref. Documents Contract Value : ₹ 4.16 Lakh
Government Departments No of Bidders 1
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
39.
Drinking Water Supply and Sanitation #11143672 AOC
Arresting Heavy Leakage On 600Mm Dia Psc Main By Replacing The Damaged Psc Pipe With 600Mm Ms Pipe And Machine Ends At Ss Pharma On Ida Bollaram Road Under Bollaram Section Sub Division-Ii O And M Div Xxiv
Contract Date: Ref. Documents Contract Value : ₹ 4.07 Lakh
Government Departments No of Bidders 1
Telangana View Result →
Telangana View Result →
Telangana View Result →
42.
Power #11129318 Technical Bid
Tender for Procurement Of M/S Hydrocraft Make Hydraulic Fittings For Wagon Tippler, Side Arm Charger, Paddle Feeder, Apron Feeder And Stacker Reclaimer Installed At Chp, Ph-I, 2X600mw And Chp-Ii, Sstpp, Mppgcl, Dongalia . (As Per Tender Schedule) , Paddle Feeder For Chp-Ii (Part-I) , Straight Coupling 60.3 O/D He-Sc-60-S , Sae Flange 3/4 6000 Psi He-Af5-402St , Straight Coupling 18 O/D He-Sc-18-L , Seamless Pipe 42 X 3 He-Pipe-42 , Pipe Clamp 60.3 O/D Pc-60-H , Apron Feeder For Chp-Ii (Part-I) , Sae Flange 1 1/2 6000 Psi He-Afs-405 St , Reducer 2/1 Br-2-1 , Sae Flange 1-6000 Psi He-Afs-255 St , Elbow 2(60.3) Lr-90-60.3 , Male Stud 28 L He-Msc-28-L , Male Stud 18 H He-Msc-18-H , Elbow 3/4 Lr-90-28 , Pipe Clamp 2 Heavy Series Pc-60-H , Pipe Clamp 3/4 Heavy Series Pc-28-H , Split Flange 1 1/2-6000 Psi He-Hf-6005 , Side Arm Charger For Chp-Ii (Part-I) , 1/2 Bsp Male Stud Coupling W8cpnbr He-Sac-001-St , Straight Coupling W4cnb He-Sac-002-Sc , Reducer To Suit Pipe 21.3 Od X 2 Thk. To Straight Coupling W4cnb He-Sac-003-Rd , Male Stud Coupling 4Cpnbr He-Sac-006-Msc , Cold Drawn Seamless Steel Tube 20 Od. X 2 Thk He-Sac-008-St , Straight Coupling 4Cnb He-Sac-009-Sc , Sae Flange Afsa 51-6 , 2 6000 Psi He-Sac-014-Sae , Reducer To Suit With Equal Tee Union W8tnb & Straight Coupling 4Cnb He-Sac-015-Rd , Seamless Steel Tube 38 Od. He-Sac-016-St , Long Radius 90° Elbow To Suit With Tube 73X 8 Thk He-Sac-017-Lre , Long Radius 90° Equal Elbow To Suit With Tube 38 X 5 Thk. He-Sac-018-Lre , Reducer To Suit Tube Od 73X8 Thk. To Tube Od 38X5 Thk He-Sac-019-Rst , Reducer To Suit Tube Od 38X5 Thk To Sae Flange 1 He-Sac-020-Rst , 1 Male Stud Coupling W Cp25-Sr He-Sac-022-Sc , Cold Drawn Seamless Steel Tube Ø25x2 Thk He-Sac-024-Cst , 1 1/4 Male Stud Coupling Wcp 38-S/R 1 1/4 He-Sac-027-Sc , Reducer To Suit With Straight Coupling Wc 25-S He-Sac-032-Sc , Straight Coupling Wc15-L He-Sac-037-Sc , Reducer To Suit Male Stud Coupling W12 Cpnbr/Pipe 26.9 Od X 3.6 Thk. . He-Sac-047-Sc-R , Male/Female Reducing Adapter Ri 1/2(M) X 1/4(F) He-Sac-051-Ra , Reducer To Suit Male Stud Coupling W12cpnbr He-Sac-053-Sm-R , Straight Coupling W 20Cnb He-Sac-055-Sc , Sae Flange 2 1/2 3000 Psi Afsa 64-3 He-Sac-059-Sae-F , Stacker Reclaimerfor Chp-Ii (Part-I) , Male Stud Coupling W Cp25-S/R 1/2 , With Bonded Seal He-St-03 , 1 Hp Ball Valve He-St-04 , Hose 1 Sae 100R2 With Swivel Nut M36x2 & O Ring At Both Ends ,Length 1500 Mm He-St-05 , Male Stud Coupling Cp10-L/R , With Bonded Seal (Hyd Air Type) He-St-06 , 1/4 Hp Ball Valve He-St-07 , Hose 1/4 Sae 100R2 With Swivel Nut M16 & O Ring At Both Ends,Length 1500 Mm He-St-08 , Sae Flange 1 6000 Psi , Avit Type Afs 25-6 Butt Weld Type To Suit 25 Od X 2.5 Thk. Pipe Without O Ring & 4 Nos. M12 X 40 Mounting Hole. He-St-09 , Hose 1/2 Sae 100R2 With Swivel Nut M24 & O Ring At Both Ends,Length 1000 Mm.(Both End Straight) He-St-13 , Straight Coupling W C12-L (Hyd Air Type) He-St-21 , Pipe Clamp For 25 Od Tube Pch 1.25 (Hyd. Air) He-St-22 , Pipe Clamp For 12 Od Tube Pch 1.12 (Hyd. Air) He-St-23 , Wagon Tippler For Chp-Ii (Part-I) , Straight Coupling ) For 38 Od Tube With One Side Swivel Nut And Weld Nipple Removed He-Wt-Wc38-S , Long Radious 90 Deg Equal Elbow To Suit With Tube 38 X 3.2 Forgedfitting As Per Asme B16.9-1993 (Butt Weld Type, 6000 Psi) He-Wt-24 , Equal Tee Union For 38 Od Tube With Weld Nipple And O Ring (Hyd Air Part No Wt38-S, Heavy Series) He-Wt-26 , 1/2 Bsp Male Stud Coupling Wc15-Lr With Bonded Seal (Hyd Air Type) With Weld Nipple & O Ring He-Wt-31 , Reducer To Suit With Tube 73 X 5. To 22 X 2 . (Butt Weld Type, 3000 Psi)Forged Fitting As Perasme B16.9-1993 He-Wt-40 , Long Radious 90 Deg Equal Elbow To Suit With Tube 73 X 5 Thk. Forgedfitting As Per Asme B16.9-1993 (Butt Weld Type, 6000 Psi) He-Wt-44 , Medium Pressure Ball Valve To Suit With 73 Od X 5 Thk. Pipe & Rated Pressure 3000 Psi, Valve Should Be Supplyed With Suitable Fittings/Flanges To Be Matched With 73 Od X 5Thk. Pipe He-Wt-47 , Long Radius 90° Elbow To Suit With Tube 73 X 5 Weld Type) Forged Fitting As Per Asme B16-9-1993(Butt Weld Type 3000 Psi) He-Wt-49 , Long Radius 90° Elbow To Suit With Tube 60.3Od X5.6 . He-Wt-53 , Equal Tee Union For 60.3 Mm Od Tube Forge Fittings As Perasme B16,9-1993,6000 Psi He-Wt-54 , Cold Drawn Seamless Steel Tube 22 X 2.2 ., As Per Din En10305-1:2002 He-Wt-56 , Sae Flange 2,3000 Psi Butt Weld Type With 0 Ring & 4 Nos. Fasteners M12 X 45 Long With Spring Washer He-Wt-E-17_L , Equal Tee T Suit With Tube 60.3 X 4.5 ,3000 Psi,Butt Weld Type Fitting. He-Wt-E-25_L , Long Radius 90° Elbow For Tube 60.3 Od ,3000 Psi,Butt Weld Type Fitting. He-Wt-E-27_L , Reducer To Suit 60.3 Od X 4.5 To 20 Od X 2.3 3000 Psi Butt Weld Type Fitting. He-Wt-E-28_L , Cold Drawn Seanless Steel Tube 20 X 2.3 Thk. As Per Din En10220-1:2002 He-Wt-E-30_L , Straight Coupling For 12 Od Tube He-Wt-E-C12-L , Reducer To Suit With Tube 12 Od X 1.6 With 35Od X 2 He-Wt-E-45_L , Equal Tee Union For 35 Od Tube Hyd. Air Part No He-Wt-35-L , Equal Elbow Union Hyd. Air Part No Wt35 L With Oil Nipple & O- Ring He-Wt-E-05_L , High Pressure Ball Valve To Suit With 38 Od X 3.2 . Pipe & Rated Pressure6000 Psi. Valve Should Be Supplyed With Suitable Fittings/Flanges To Be Matched With 38 Od X 3.2 Pipe He-Wt-E-05_L , High Pressure Ball Valve To Suit With-Out 38 Od X 3.2 . Pipe & Rated Pressure 6000 Psi. Valve Should Be Supplyed With Suitable Fittings/Flanges To Be Matched With 38 Od X 3.2 .Pipe He-Wt-E-05_L , Low Pressure Ball Valve To Suit With 38 Od X 2.6 Thk. Pipe & Rated Pressure 3000 Psi. Valve Should Be Supplyed With Suitable Fittings/Flanges To Be Matched With 38 Od X 2.6 Thk.Pipe , Pipe Clamp For 38 Od. Tube P.C.H 1.38 , Pipe Clamp For 35 Od. Tube P.C.H 1.35 , Pipe Clamp For 33.7 Od Tube P.C.H 1.33 , Pipe Clamp For 22 Od. Tube P.C.H 1.22 , Tube-Cs (Part-A Material For Wagon Tippler Chp-I) , 12 O/D X 1.5 Thk As Per Din 2391 Pipe 12/1.5 , 18 O/D X 2 Thk As Per Din 2391 Pipe 18/2 , 20 O/D X 2.5 Thk As Per Din 2391 Pipe 20/2.5 , 22 O/D X 2 Thk As Per Din 2391 Pipe 22/2 , 30 O/D X 4 Thk As Per Din 2391 Pipe 30/4 , 28 O/D X 2.5 Thk As Per Din 2391 Pipe 28/2.5 , 42.2 O/D X 6.35 Thk As Per Astm A106 Gr.B Pipe 42.2/6.35 , 48.3 O/D X 3.7 Thk As Per Astm A106 Gr.B Pipe 48.3/3.7 , 60.3 O/D X 6.35 Thk As Per Astm A106 Gr.B Pipe 60.3/6.35 , Male Stud Coupling(Part-A Material For Wagon Tippler Chp-I) , Wcp 30Sr With Bonded Seal (Hyd. Air Type) Mse-30S , Cp 22Lr With Bonded Seal (Hyd. Air Type) Msc-22L , Cp 20Sm With Bonded Seal W/O Swivel Nut (Hyd. Air Type) Msc-20S , Cp 18Lr With Bonded Seal (Hyd. Air Type) Mse-18L , Cp 12Sm With Bonded Seal W/O Swivel Nut (Hyd. Air Type) Msc-12S , Cp 12Lr ½ With Bonded Seal (Hyd. Air Type) Mse-12S/1-2 , Straight Coupling (Part-A Material For Wagon Tippler Chp-I) , W C28l (Hyd Air Type) Sc-28L , W 24Cnb One End Swivel Nut & Weld Nipple (Hyd Air Type) Sc-24L , W C18l One End Swivel Nut & Weld Nipple (Hyd Air Type) Sc-18L , W C12l (Hyd Air Type) Sc-12L , Equal Elbow(Part-A Material For Wagon Tippler Chp-I) , We28l(Hyd Air Type) El-28L , We22l(Hyd Air Type) El-22L , We18l(Hyd Air Type) El-18L , We12l(Hyd Air Type) El-12L , Equal Tee(Part-A Material For Wagon Tippler Chp-I) , To Suit 60.3X6.35 Tube To (Butt Weld Type, 6000 Psi) Forged Fitting As Per Asme B16.9-1993 Et-B-60.3/6.35 , To Suit 48.3X3.37 Tube To (Butt Weld Type, 3000 Psi) Forged Fitting As Per Asme B16.9-1993 Et-B-48.3/3.37 , W T28-L (Hyd Air Type) Et-28L , W T22-L (Hyd Air Type) Et-22L , Sae Flange ( Butt Weld Type)(Part-A Material For Wagon Tippler Chp-I) , 2 Sae Flange -6000 Psi - Butt Weld Type To Suit 60.3X6.35 Pipe With ‘O Ring & 4 Nos. M20x60lg Socket Head Screw & Spring Washer ( Avit Type Afsa 51-6) Sae-F-2-60.3/6.35 , 2 Sae Flange -3000 Psi - Butt Weld Type To Suit 60.3 X 6.35 Pipe With ‘O Ring & 4 Nos. M12x45lg Socket Head Screw & Spring Washer ( Avit Type Afsa 51-3) Sae-F-2-60.3/3.91 , 1½ Sae Flange -3000 Psi - Butt Weld Type To Suit 48.3X3.7 Pipe With ‘O Ring & 4 Nos. M12x1.75(P)X45lg Socket Hd Screw & Spring Washer ( Avit Type Afsa 38-6) Sae-F-11/248.3/3.7 , 1½ Sae Flange -3000 Psi - Butt Weld Type To Suit 48.3X3.7 Pipe Without ‘O Ring &Fastners ( Avit Type Afs 38-3) Sae-F-11/248.3/3.7 , 1½ Sae Flange -6000 Psi - Butt Weld Type To Suit 42.2X6.35 Pipe Without ‘O Ring & Fasteners ( Avit Type Afs 38-6) Sae-F-11/242.2/6.35 , 1½ Sae Flange -6000 Psi - Butt Weld Type To Suit 42.3X6.35 Pipe With ‘O Ring & 4 Nos. M14x45lg Socket Head Screw & Spring Washer ( Avit Type Afsa 38-6) Sae-F-11/242.2/6.35 , Pipe Clamp(Part-A Material For Wagon Tippler Chp-I) , 42.2 O/D Tube- Pch. 1.48 (Hyd Air) Pc-H-42.2 , 30 O/D Tube- Pch. 1.30 (Hyd Air) Pc-H-60.6 , 22 O/D Tube- Pch. 1.22 (Hyd Air) Pc-H-60.8 , 20 O/D Tube- Pch. 1.20 (Hyd Air) Pc-H-60.9 , Reducer Fittings(Part-A Material For Wagon Tippler Chp-I) , To Suit With Tube 60.3X3.91 To 48.3X3.7( Butt Weld Type, 3000Psi ) Forged Fitting As Per Asme B16.9-1993, Schedule 40 Rf-B-60.3/48.3 , To Suit With Tube 60.3X6.35 To 42.2X6.35( Butt Weld Type, 6000Psi ) Forged Fitting As Per Asme B16.9-1993 Rf-B-60.3/42.2 , To Suit With Tube 48.3X3.7 To 28X2.5( Butt Weld Type, 3000Psi ) Forged Fitting As Per Asme B16.9-1993 Rf-B-48.3/28 , To Suit With Tube 48.3X3.7 To 18X2( Butt Weld Type, 3000Psi ) Forged Fitting As Per Asme B16.9-1993 Rf-B-48.3/18 , To Suit With Pipe 22 O/D To 12 O/D As Per Crs22 / 12L(Hyd Airtype) Rf-22/12 , 1 (M)X1¼ (F) With Copper Washer (Hyd Air Type) Mfa-1/1-1/4 , 1/2 (M)X3/4 (F) With Bonded Seal (Hyd Air Type) Mfa-1/2-3/4 , 3/4 (M)X1 (F) With Copper Washer (Hyd Air Type) Mfa-3/4-1 , 3/4 (M)X1 (F) With Bonded Seal (Hyd Air Type) Mfa-3/4-1 , 1/4 (M)X1/2 (F) With Bonded Seal (Hyd Air Type) Mfa-1/4-1/2 , 3/8 (M)X1/2 (F) With Bonded Seal (Hyd Air Type) Mfa-3/8-1/2 , Long Radius Elbow(Part-A Material For Wagon Tippler Chp-I) , 90º Elbow To Suit With Tube 60.3 O/D X 6.35 Thk. Forged Fitting As Per Asme B16.9-1993 ( Butt Weld Type,6000Psi) E-Lr-60.3 , 90º Elbow To Suit With Tube 48.3 O/D X3.7 Thk. Schedule 40, Forged Fitting As Per Asme B16.9-1993 ( Butt Weld Type,3000Psi E-Lr-48.3 , 90º Elbow To Suit With Tube 42.2 O/D X 6.35 Thk. Forged Fitting As Per Asme B16.9-1993 ( Butt Weld Type,6000Psi) E-Lr-42.2 , Throttle Free Swivel Banjo Connector (Part-A Material For Wagon Tippler Chp-I) , W Dbe30 special repair With Bonded Seal (Hyd Air Type) Bc-30S , Tube- C.S (Part-B Material For Side Arm Charger Chp-I) , 25 O/D X 3 Thk As Per Din 2391 He-Tube/002 , Male Stud Coupling(Part-B Material For Side Arm Charger Chp-I) , Wcp 25Sr(1X25) With Bonded Seal (Hyd. Air Type) He/Msc/001 , Cp 12 Sm (½ X12) With Bonded Seal (Hyd. Air Type) He/Msc/006 , Straight Coupling(Part-B Material For Side Arm Charger Chp-I) , W C25s One End Swivel Nut & Weld Nipple (Hyd Air Type) He/Sc/001 , W C25s (Hyd Air Type) He/Sc/002 , W C20s One End Swivel Nut & Weld Nipple (Hyd Air Type) He/Sc/003 , W C12s One End Swivel Nut & Weld Nipple (Hyd Air Type) He/Sc/004 , W C12s (Hyd Air Type) He/Sc/005 , Sae Flange ( Butt Weld Type)(Part-B Material For Side Arm Charger Chp-I) , 1½ Sae Flange -6000 Psi - Butt Weld Type To Suit 42.2X6.35 Pipe With ‘O Ring & 4 Nos. M16x 50 Lg Socket Head Screw & Spring Washer ( Avit Type Afsa 38-6) He/Sae/001 , 1 ¼ Sae Flange -6000 Psi - Butt Weld Type To Suit 42.2X6.35 Pipe Without ‘O Ring & Fasteners ( Avit Type Afs 32-6)He/Sae/002 , 1¼ Sae Flange -6000 Psi - Butt Weld Type To Suit 42.2X6.35 Pipe With ‘O Ring & 4 Nos. M14x 45 Lg Socket Head Screw & Spring Washer ( Avit Type Afsa 32-6) He/Sae/003 , Pipe Clamp (Part-B Material For Side Arm Charger Chp-I) , 25 O/D Tube- Pch. 1.25 (Hyd Air) He/Psc/002 , Reducer Fitting(Part-B Material For Side Arm Charger Chp-I) , 1 (M) X 3/4 (F) With Bonded Seal (Hyd Air Type) He/Rf/001 , 1/2 (M) X 3/8 (F) With Bonded Seal (Hyd Air Type) He/Rf/002 , Long Radiouselbow(Part-B Material For Side Arm Charger Chp-I) , 90º Elbow To Suit With Tube 42.2 O/D X 6.35 Thk. Forged Fitting As Per Asme B16.9-1993 (Butt Weld Type, 6000 Psi) , Throttle Free Swivel Banjo Seal(Part-B Material For Side Arm Charger Chp-I) , W Dbe20 special repair With Bonded Seal (Hyd. Air Type) , Tube - C.S(Part -C Material For Apron Feeder Chp-I) , 48.3 O/D X 7.14 Thk. As Per Astm A106 Gr.B He/T/001 , Male Stud Coupling(Part -C Material For Apron Feeder Chp-I) , Wcp 25 special repair (1 X 25) With Bonded Seal (Hyd Air Type) 25Sr , Female Stud Coupling Cfp 25Sr (1 X 25) With Bonded Seal (Hyd Air Type) F-25Sr , Cp 18Lm With Bonded Seal (Hyd Air Type) 18Sr , Wcp 18Lr With Bonded Seal (Hyd Air Type) W18sr , Straight Coupling(Part -C Material For Apron Feeder Chp-I) , Wc 18L 18L , Sae Flange ( Butt Weld Type)(Part -C Material For Apron Feeder Chp-I) , 1½ Sae Flange-6000 Psi-Butt Weld Type - To Suit 48.3 X7.14 Pipe With ‘O Ring (Avit Type Afsa 38-6) He/38-6A , 1½ Sae Flange-6000 Psi-Butt Weld Type - To Suit 48.3 X7.14 Pipe Without ‘O Ring (Avit Type Afsa 38-6) He/38-6B , 1½ Sae Flange-6000 Psi-Butt Weld Type - To Suit 48.3 X7.14 Pipe Without ‘O Ring (Avit Type Afsa 38-6) With Drill & Tap. He/38/6C , 1 Sae Flange-6000 Psi-Butt Weld Type - To Suit 33.7 X7.1 Pipe With ‘O Ring (Avit Type Afsa 25-6) With 4 Nos. M12 X40lgsocket Head Screw He/38-6D , Reducer Fitting (Part -C Material For Apron Feeder Chp-I) , 1 (M) X ½ (F) (Hyd Air Type) He/R/1-1/2 , To Suit 33.7 X 7.1 Pipe & 48.3 X 7.14 Pipe (6000 Psi) - 90Lg , Long Radius Elbow(Part -C Material For Apron Feeder Chp-I) , 90º Elbow To Suit With Tube 48.3 O/D X 7.145 Thk. Schedule 160, Forged Fitting As Per Asme B16.9 (6000 Psi) He/E-48.6 , Male Stud Coupling( Part-D Material For Paddle Feeder Chp-I) , Wcp 38 special repair 1/4 With Bonded Seal (Hyd Air Type) 38Sr , Wcp 30 special repair With Bonded Seal (Hyd Air Type) 30Sr , Wcp 25 special repair With Bonded Seal (Hyd Air Type) 25Sr , Wcp 22 Lane Road With Bonded Seal (Hyd Air Type) 22Lr , Wcp 22 Lm With Bonded Seal (Hyd Air Type) 22Lm , Cp 20 Sm With Bonded Seal (Hyd Air Type) 20Sr , Cp 20 special repair With Bonded Seal (Hyd Air Type) 20Sm , Cp 18 Lm With Bonded Seal (Hyd Air Type) 18Lm , Cp 18 Lane Road With Bonded Seal (Hyd Air Type) 18Lr , Straight Coupling( Part-D Material For Paddle Feeder Chp-I) , W C30s (Hyd Air Type) C30s , W C22l (Hyd Air Type) C22l , W C18l (Hyd Air Type) C18l , Equal Elbow( Part-D Material For Paddle Feeder Chp-I) , W E30s (Hyd Air Type) E30s , W E25s (Hyd Air Type) E25s , W E22l (Hyd Air Type) E22l , Equal Tee( Part-D Material For Paddle Feeder Chp-I) , W T25-S (Hyd Air Type) T25s , W T22-L (Hyd Air Type) T22l , W T18-L (Hyd Air Type) T18l , Pipe Clamp (Part-D Material For Paddle Feeder Chp-I) , 30 O/D Tube - Pch 1.30 (Hyd Air Type) He/Pp/30 , 25 O/D Tube - Pch 1.30 (Hyd Air Type) He/Pp/25 , 22 O/D Tube - Pch 1.30 (Hyd Air Type) He/Pp/22 , 18 O/D Tube - Pch 1.30 (Hyd Air Type) He/Pp/18 , Reducer Fitting(Part-D Material For Paddle Feeder Chp-I) , 1 (M) X 3/4 (F) With Bonded Seal (Hyd Air Type) He/R-1-3/4 , 3/4 (M) X 1 (F) With Bonded Seal (Hyd Air Type) He/R-1-2/1 , 1/2 (M) X 3/4 (F) With Bonded Seal (Hyd Air Type) He/R-1/2-3/4 , 3/8 (M) X 1/2 (F) With Bonded Seal (Hyd Air Type) He/R-3/8-1/2 , Plug(Part-D Material For Paddle Feeder Chp-I) , 1/2 Bsp He-P1/2 , 3/8 Bsp He-3/8 , Tube - C.S(Part-E Material For Stacker Reclaimer Chp-I) , 38 O/D X 5 Thk. As Per Din 2391 Pipe-38/5 , 30 O/D X 4 Thk. As Per Din 2391 Pipe-30/4 , 30 O/D X 3 Thk. As Per Din 2391 Pipe-30/3 , 25 O/D X 4 Thk. As Per Din 2391 Pipe-25/4 , 20 O/D X 2.5 Thk. As Per Din 2391 Pipe-20/2.5 , 16 O/D X 2 Thk. As Per Din 2391 Pipe-16/2 , 12 O/D X 1.5 Thk. As Per Din 2391 Pipe-12/1.5 , 10 O/D X 1.5 Thk. As Per Din 2391 Pipe-10/1.5 , Male Stud Coupling(Part-E Material For Stacker Reclaimer Chp-I) , Cp 38 special repair (Hyd Air Type) Msc-38S , Ge 30 Psr (With 11/4 Bsp-M) Msc-30S , Ge 16 Psr (With 1/2 Bsp-M) Msc-16S , Wcp 12 special repair (Hyd Air Type) Msc-125 , Straight Coupling(Part-E Material For Stacker Reclaimer Chp-I) , G 30 Ps Sc-30S , G 16 Ps Sc-16S , G 12 Ps Sc-12S , Equal Elbow(Part-E Material For Stacker Reclaimer Chp-I) , Butt Weld Type To Suit 60.3 O/D Pipe As Per Ansi B16.9-1993 Ee-60.3 , Butt Weld Type To Suit 38 O/D Pipe As Per Ansi B16.9-1993 Ee-38 , Equal Tee(Part-E Material For Stacker Reclaimer Chp-I) , To Suit With Pipe 38 O/D X 5 Thk. Pressure 400 Bar Thb-38S , T 38 Ps Et-38S , T 30 Ps Et-30S , Sae Flange (Single Piece System-Butt Weld Type)(Part-E Material For Stacker Reclaimer Chp-I) , 1½ Sae Flange, Code-62, 6000Psi With O Ring (Avit Type -Afsa) To Suit 60.3 O/D Pipe. Saef-1 ½-60.3 , 1½ Sae Flange, Code-62, 6000Psi Without O Ring (Avit Type -Afsa) To Suit 60.3 O/D Pipe. Saef-1 ½-60.3 , 1½ Sae Flange, Code-62, 6000Psi With O Ring (Avit Type -Afsa) To Suit 38 O/D Pipe. Saef-1 ½-38 , 1½ Sae Flange, Code-62, 6000Psi Without O Ring (Avit Type -Afsa) To Suit 38 O/D Pipe. Saef-1 ½ -38 , Reducer Fittings(Part-E Material For Stacker Reclaimer Chp-I) , 1 Bsp(M) X 1/2 Bsp(F) Mfa-1-1/2 , To Suit 38 X 5 & 20 X3 X 3 Pipes As Perhyd Air Type W Crs38/20S Rf-38/20 , M14 X 1.5 (M) X 3/4 Bsp (M) Mma-M14-3/4 , Plug In For 3/4 Bsp(F) P-3/4 , 1 Bsp(M) X 1¼ Bsp(F) Mfa-1.1/4 , 3/4 Bsp (M) X 1¼ Bsp (M) Mma-3/4 -1.1/4 , Socket Weld Type Reducer To Suit 30 O/D X 25 O/D Pipe Sw-R-30/25 , Long Radious Elbow(Part-E Material For Stacker Reclaimer Chp-I) , 45º Bend Butt Weld Type To Suit 60.3 O/D Pipe As Per Ansi B16.9-1993 El-B-60.3
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Madhya Pradesh View Result →
43.
Drinking Water Supply and Sanitation #11113456 AOC
Replacement Of 1200Mm Dia Psc Pipe Line With Ms Pipes At Ch. No. 579.00 Near Janwada Village On Transmission Main From Singapur To Khanapur Under Singapur Section Sd-Iii, O And M Dn. Viii, Patancheru.
Contract Date: Ref. Documents Contract Value : ₹ 29.85 Lakh
Government Departments No of Bidders 1
Telangana View Result →
44.
Public Administrative Department #11097049 Price Bid
Tender for Leak Repairing Work On Existing Water Pipe Line 600 Mm Dia. Psc Main At 148/2, 148/3, 26 And 15 N S C Bose Road And Other Location In Br-X
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
45.
Housing Urban and Rular Development #11087819 Technical Bid
Tender for Emergent Leak Repairing On Two Nos. 750 Mm Dia Psc Transmission Main Pipe Line, One At M.G. Road Near Shy Ur Petrol Pump And Another At M.G. Road Near Bankim Bhavan In Ward No. - 12 Under Budge Budge Municipality.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
Telangana View Result →
50.
Coal and Mines #11056993 AOC
Maintenance Of Existing Ac And Psc Pipelines Gi Pipes And Hdpe Pipelines Etc At Sector I And Sector Ii Areas In Rg I Area Gdk
Contract Date: Ref. Documents Contract Value : ₹ 13.25 Lakh
Government Departments No of Bidders 1
Telangana View Result →
TenderDetail
Loading tenders