View Bid Results For Pre Fab Partition Tenders

We found 25 Bid Results related to pre fab partition tenders. You can find Contractor details who won pre fab partition tenders along with contract details in Bid awards announcements section.

Indian Tenders
77
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
20
4
1
Tender Publishing Platform
2
23
State / UT
13
5
3
2
2
2
2
2
2
1
1
1
1
1
Contract Value
5
3
14
3
Publish Date
0
0
0
0
0
Sector
7
15
3
3
1
1
1
1
Ownership
5
15
7
1
1
1
Within keyword
Active filters:
Showing 1–1 of 25 tenders matching your filters
1.
Power #10172978 AOC
Tender For Annual Maintenance Repair Of Md Dvvnl Office Vidyut Adhikari Colony At 220 Kv Sub Station, Sikandra, Agra - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: (DSR 2.1) All kinds of soil (DSR 2.1.1) 2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. (DSR 2.6) All kinds of soil (DSR 2.6.1) 3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(DSR 2.8) All kinds of soil. (DSR 2.8.1) 4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. (DSR )(DSR 2.25) 5 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. (DSR )(DSR 2.25(a)) 6 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. (DSR 2.26) All kinds of soil (DSR 2.26.1) 7 Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. (DSR )(DSR 2.27) 8 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (DSR 2.28) All kinds of soil (DSR 2.28.1) 9 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (DSR 2.29) All kinds of soil (DSR 2.29.1) 10 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (DSR 2.3) All kinds of soil (DSR 2.30.1) 11 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR )(DSR 2.31) 12 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR )(DSR 2.32) 13 Supplying chemical emulsion in sealed containers including delivery as specified. (DSR 2.34) Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (DSR 2.34.1) 14 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: 2.35.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration (DSR 2.35.1.1) 15 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 2.35.2 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration (DSR 2.35.2.1) 16 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (DSR 2.35.3.1) 17 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : 2.35.4 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (DSR 2.35.4.1) 18 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. (DSR 2.35.5) 19 Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge. (DSR )(DSR 2.36) 20 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.2) 21 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.3) 22 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.8) 23 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.11) 24 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.2.2) 25 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.2.3) 26 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:2:4 (1 Cement : 2 coarse sand (zone-III)including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%)). (DSR 4.2.3A) 27 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). (DSR 4.2.8) 28 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Foundations, footings, bases for columns (DSR 4.3.1) 29 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. (DSR 4.3.2) 30 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Columns, piers, abutments, pillars, posts and struts (DSR 4.3.3) 31 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. (DSR 4.4) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.4.1) 32 Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. (DSR 4.5) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) (DSR 4.5.1) 33 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. (DSR 4.6) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.6.1) 34 Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : (DSR 4.7) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.7.1) 35 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources), including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. (DSR )(DSR 4.9) 36 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).(DSR )(DSR 4.11) 37 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification. (DSR )(DSR 4.12) 38 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (DSR 5.1) C (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.1.2) 39 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (DSR 5.2) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.2.2) 40 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.3) 41 Providing and laying reinforced cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.4) 42 Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.5) 43 Reinforced cement concrete work in chimneys, shafts, up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.6) 44 Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). (DSR )(DSR 5.8) 45 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Foundations, footings, bases of columns, etc. for mass concrete (DSR 5.9.1) 46 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (DSR 5.9.2) 47 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Suspended floors, roofs, landings, balconies and access platform (DSR 5.9.3) 48 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Shelves (Cast in situ) (DSR 5.9.4) 49 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Lintels, beams, plinth beams, girders, bressumers and cantilevers (DSR 5.9.5) 50 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Columns, Pillars, Piers, Abutments, Posts and Struts (DSR 5.9.6) 51 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Stairs, (excluding landings) except spiral-staircases (DSR 5.9.7) 52 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Chimneys and shafts (DSR 5.9.11) 53 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards(DSR 5.9.13) 54 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like (DSR 5.9.15) 55 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Edges of slabs and breaks in floors and walls 5.9.16 Under 20 cm wide (DSR 5.9.16.1) 56 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Weather shade, Chajjas, corbels etc., including edges (DSR 5.9.19) 57 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.12) 58 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.13) 59 Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR )(DSR 5.15) 60 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (DSR 5.22) Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22.6) 61 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (DSR 5.22A) Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22A.6) 62 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) 63 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.1.2) 64 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.4.1) 65 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.4.2) 66 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (DSR 6.13) Cement mortar 1:4 (1 cement :4 coarse sand) (DSR 6.13.2) 67 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab upto 0.50 sqm (DSR 8.2.1.1) 68 (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab over 0.50 sqm (DSR 8.2.1.2) 69 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Granite stone slab of colour black, Cherry/Ruby red 8.2.2 Area of slab upto 0.50 sqm (DSR 8.2.2.1) 70 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Granite stone slab of colour black, Cherry/Ruby red 8.2.2 Area of slab over 0.50 sqm (DSR 8.2.2.2) 71 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Granite stone slab of all colour and texture except black, Cherry/Ruby red 8.2.3 Area of slab over 0.50 sqm (DSR 8.2.3.2) 72 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (DSR 8.3) Granite work (DSR 8.3.2) 73 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (DSR )(DSR 8.4) 74 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (DSR )(DSR 8.5) 75 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. (DSR )(DSR 8.6) 76 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : (DSR 8.14) Red sand stone - exposed face fine dressed with rough backing. 8.14.1 30 mm thick (DSR 8.14.1.5) 77 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : (DSR 8.28) Decorative veneer facings of approved manufacture (DSR 8.28.1) 78 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 18 mm thick (DSR 8.30.1) 79 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 25 mm thick (DSR 8.30.2) 80 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR )(DSR 8.31) 81 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. (DSR )(DSR 8.32) 82 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (DSR 9.1) Sal wood (DSR 9.1.2) 83 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 35 mm thick shutters (DSR 9.5.1.1) 84 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 30 mm thick shutters (DSR 9.5.1.2) 85 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (DSR 9.7) Second class teak wood (DSR 9.7.1) 86 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 35 mm thick (DSR 9.9.1.1) 87 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 30 mm thick (DSR 9.9.1.2) 88 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) (DSR 9.11) 5.0 mm thick(weight not less than 12.50 kg per sqm) instead of 4 mm thick(weight not less than 10 kg per sqm). (DSR 9.11.1) 89 Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). (DSR )(DSR 9.12) 90 Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). (DSR )(DSR 9.14) 91 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Panelled or panelled & glazed shutters : 9.16.1 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.1.2) 92 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Glazed shutters : 9.16.2 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.2.2) 93 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 12 mm thick (DSR 9.17.1) 94 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 18 mm thick (DSR 9.17.2) 95 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). (DSR 9.18) 18 mm thick (DSR 9.18.1) 96 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). (DSR 9.18) 25 mm thick (DSR 9.18.2) 97 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DSR 9.2) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.20.1) 98 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DSR 9.2) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.20.2) 99 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DSR 9.2) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws (DSR 9.20.3) 100 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.1) 101 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.2) 102 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.21.3) 103 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). (DSR 9.25) Decorative type door (DSR 9.25.1) 104 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). (DSR )(DSR 9.26) 105 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters (DSR 9.27.1) with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.1.1 Second class teak wood (DSR 9.27.1.1.1 ) 106 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters (DSR 9.27.1) With ISI marked stainless steel butt hinges of required size 9.27.1.2 Second class teak wood (DSR 9.27.1.2.1) 107 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutters (DSR 9.27.2) with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.2.1 Second class teak wood (DSR 9.27.2.1.1) 108 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutters (DSR 9.27.2) With ISI marked stainless steel butt hinges of required size 9.27.2.2 Second class teak wood (DSR 9.27.2.2.1) 109 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) 2nd class teak wood 9.40.1 50x12 mm (DSR 9.40.1.1) 110 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) 2nd class teak wood 9.40.1 50 x 20 mm (DSR 9.40.1.2) 111 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) Kiln seasoned and chemically treated hollock wood 9.40.2 50x12 mm (DSR 9.40.2.1) 112 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) Kiln seasoned and chemically treated hollock wood 9.40.2 50x20 mm (DSR 9.40.2.2) 113 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (DSR 9.47) 20 mm dia (heavy type) (DSR 9.47.1) 114 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (DSR 9.47) 25 mm dia (heavy type) (DSR 9.47.2) 115 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (DSR 9.48) Fixed to steel windows by welding (DSR 9.48.1) 116 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (DSR 9.48) Fixed to openings /wooden frames with rawl plugs screws etc. (DSR 9.48.2) 117 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : (DSR 9.56) 125x90x4.00 mm (DSR 9.56.1) 118 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : (DSR 9.56) 100x75x3.50 mm (DSR 9.56.2) 119 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : (DSR 9.56) 75x60x3.10 mm (DSR 9.56.3) 120 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 125x65x2.12 mm (DSR 9.57.1) 121 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 100x58x1.90 mm (DSR 9.57.2) 122 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 75x47x1.70 mm (DSR 9.57.3) 123 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.59) 150 mm (DSR 9.59.1) 124 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.59) 125 mm (DSR 9.59.2) 125 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.59) 100 mm (DSR 9.59.3) 126 Providing and fixingISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.6) 150 mm (DSR 9.60.1) 127 Providing and fixingISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.6) 125 mm (DSR 9.60.2) 128 Providing and fixingISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.6) 100 mm (DSR 9.60.3) 129 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.62) 300x16 mm (DSR 9.62.1) 130 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.62) 250x16 mm (DSR 9.62.2) 131 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 250x10 mm (DSR 9.63.1) 132 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 200x10 mm (DSR 9.63.2) 133 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 150x10 mm (DSR 9.63.3) 134 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 100x10 mm (DSR 9.63.4) 135 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378). (DSR )(DSR 9.64) 136 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.65) 300x20x6 mm (DSR 9.65.1) 137 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.65) 250x20x6 mm (DSR 9.65.2) 138 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 125 mm (DSR 9.66.1) 139 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 100 mm (DSR 9.66.2) 140 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 75 mm (DSR 9.66.3) 141 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.67) 150 mm (DSR 9.67.1) 142 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.67) 115 mm (DSR 9.67.2) 143 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.67) 90 mm (DSR 9.67.3) 144 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 125x64x1.90 mm (DSR 9.70.1) 145 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 100X58X1.90 mm (DSR 9.70.2) 146 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 75x47x1.80 mm (DSR 9.70.3) 147 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 50x37x1.50 mm (DSR 9.70.4) 148 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : (DSR 9.71) 125x64x2.50 mm (DSR 9.71.1) 149 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : (DSR 9.71) 100x60x2.50 mm (DSR 9.71.2) 150 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : (DSR 9.71) 75x50x2.50 mm (DSR 9.71.3) 151 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 250x10 mm (DSR 9.74.1) 152 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 200x10 mm (DSR 9.74.2) 153 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 150x10 mm (DSR 9.74.3) 154 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 100x10 mm (DSR 9.74.4) 155 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.76) 156 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.77) 157 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (DSR )(DSR 9.83) 158 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (DSR )(DSR 9.84) 159 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : (DSR 9.87) 150 mm (DSR 9.87.1) 160 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : (DSR 9.87) 115 mm (DSR 9.87.2) 161 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : (DSR 9.87) 90 mm (DSR 9.87.3) 162 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.88) 163 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. (DSR )(DSR 9.89) 164 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 40 mm (DSR 9.90.1) 165 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 50 mm (DSR 9.90.2) 166 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 65 mm (DSR 9.90.3) 167 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 75 mm (DSR 9.90.4) 168 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. (DSR )(DSR 9.91) 169 Providing and fixing chromium plated brass handles with necessary screws etc. complete: (DSR 9.92) 125 mm (DSR 9.92.1) 170 Providing and fixing chromium plated brass handles with necessary screws etc. complete: (DSR 9.92) 100 mm (DSR 9.92.2) 171 Providing and fixing chromium plated brass handles with necessary screws etc. complete: (DSR 9.92) 75 mm (DSR 9.92.3) 172 Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. (DSR )(DSR 9.93) 173 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR 9.95) 125x63x4 mm (DSR 9.95.2) 174 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR 9.95) 100x63x3.2 mm (DSR 9.95.5) 175 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR 9.95) 75x63x3.2 mm (DSR 9.95.7) 176 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (DSR 9.96) 300x16 mm (DSR 9.96.1) 177 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (DSR 9.96) 250x16 mm (DSR 9.96.2) 178 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 300x10 mm (DSR 9.97.1) 179 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 250x10 mm (DSR 9.97.2) 180 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 200x10 mm (DSR 9.97.3) 181 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 150x10 mm (DSR 9.97.4) 182 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 100x10 mm (DSR 9.97.5) 183 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. (DSR )(DSR 9.98) 184 Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (DSR )(DSR 9.99) 185 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.1) 125 mm (DSR 9.100.1) 186 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.1) 100 mm (DSR 9.100.2) 187 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.1) 75 mm (DSR 9.100.3) 188 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR 9.101) Single rubber stopper (DSR 9.101.1) 189 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR 9.101) Twin rubber stopper (DSR 9.101.2) 190 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.103) 191 Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. (DSR )(DSR 9.104) 192 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. (DSR )(DSR 9.110) 193 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (DSR 9.114) Triple strip vertical type (DSR 9.114.1) 194 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (DSR 9.114) Double strip (horizontal type) (DSR 9.114.2) 195 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. (DSR )(DSR 9.115) 196 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) (DSR )(DSR 9.116) 197 Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. (DSR 9.126) Marine plywood conforming to IS: 710 (DSR 9.126.1) 198 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (DSR 9.127) 1.5 mm thick (DSR 9.127.1) 199 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (DSR 9.127) 1.0 mm thick (DSR 9.127.2) 200 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge (DSR )(DSR 9.129) 201 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :30 mm thick shutters (DSR 9.134.2) With ISI marked stainless steel butt hinges of required size 9.134.2.2 Second class teak wood (DSR 9.134.2.2.1 ) 202 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. (DSR 9.135) With 2nd class teak wood beading 62X19 mm (DSR 9.135.1) 203 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (DSR 9.165) 125 mm (DSR 9.165.1) 204 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (DSR 9.165) 100mm (DSR 9.165.2) 205 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (DSR 9.165) 75 mm (DSR 9.165.3) 206 Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). (DSR 9.166) 18 mm thick (DSR 9.166.1) 207 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. (DSR )(DSR 9.167) 208 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)(DSR )(DSR 9.168) 209 Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc.complete as per direction of Engineer-in-charge.(DSR )(DSR 9.169) 210 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. (DSR 9.17) 200 mm (DSR 9.170.1) 211 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 9.171) 212 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. (DSR )(DSR 9.172) 213 Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensilbasket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) (DSR )(DSR 9.173) 214 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. (DSR )(DSR 9.174) 215 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR )(DSR 10.1) 216 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR )(DSR 10.2) 217 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. (DSR 10.1) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (DSR 10.10.1) 218 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. (DSR 10.1) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (DSR 10.10.2) 219 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (DSR 10.15) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (DSR 10.15.1) 220 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (DSR 10.15) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (DSR 10.15.2) 221 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (DSR 10.16) Electric resistance or induction butt welded tubes (DSR 10.16.3) 222 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. (DSR )(DSR 10.17) 223 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. (DSR )(DSR 10.18) 224 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR 10.25) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete (DSR 10.25.1) 225 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR 10.25) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR 10.25.2) 226 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (DSR 10.26) M.S. tube (DSR 10.26.1) 227 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (DSR 10.26) E.R.W. tubes (DSR 10.26.2) 228 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR )(DSR 10.28) 229 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. (DSR 10.29) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides (DSR 10.29.2) 230 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (DSR 10.3) 4.0 mm thick glass panes (DSR 10.30.1) 231 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (DSR )(DSR 10.31) 232 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: (DSR 11.1) 1:4 (1 cement : 4 coarse sand) (DSR 11.1.1) 233 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: (DSR 11.1) 1:6 (1cement : 6 coarse sand) (DSR 11.1.2) 234 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. (DSR )(DSR 11.2) 235 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (DSR 11.3) 40 mm thick with 20 mm nominal size stone aggregate (DSR 11.3.1) 236 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. (DSR 11.6) 18 mm thick (DSR 11.6.1) 237 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. (DSR )(DSR 11.7) 238 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. (DSR ) 40 mm wide and 4 mm thick (DSR 11.13.1) 239 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (DSR 11.2) Dark shade pigment using ordinary cement (DSR 11.20.3) 240 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (DSR 11.2) Ordinary cement without any pigment (DSR 11.20.4) 241 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (DSR 11.21) In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.1 Acid and alkali resistant tile (DSR 11.21.1.1) 242 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (DSR 11.21) In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.2 Acid and alkali resistant tile (DSR 11.21.2.1) 243 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : (DSR 11.23) Udaipur green marble (DSR 11.23.5) 244 Extra for pre finished nosing to treads of steps of marble stone. (DSR )(DSR 11.24) 245 Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre. (DSR )(DSR 11.25) 246 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (DSR 11.26) 25 mm thick (DSR 11.26.1) 247 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR )(DSR 11.27) 248 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. (DSR 11.28) Red sand stone (DSR 11.28.1) 249 Extra for Kota stone/ sand stone in treads of steps and risers using single length above normal size up to 2.00 metre. (DSR )(DSR 11.32) 250 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (DSR )(DSR 11.37) 251 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (DSR )(DSR 11.37A) 252 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. (DSR )(DSR 11.38) 253 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. (DSR 11.41) Size of Tile 600x600 mm (DSR 11.41.2) 254 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (DSR 11.41A) Double charge vitrified tile polished finish of size 11.41A.1 Size of Tile 600 x 600 mm (DSR 11.41A.1.1) 255 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. (DSR )(DSR 11.45) 256 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (DSR 11.48) Size of Tile 600x600 mm (DSR 11.48.2) 257 Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.30 kg / sqm including grouting thejoints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only.Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400mm of all colours and shades.(DSR )(DSR 11.49A) 258 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. (DSR )(DSR 11.50) 259 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 75 mm (DSR 12.42.1.1) 260 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 110 mm (DSR 12.42.1.2) 261 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (DSR 12.45) 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) (DSR 12.45.1) 262 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. (DSR 12.47) 2 mm thick flat (DSR 12.47.2) 263 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (DSR 12.52) 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. (DSR 12.52.4) 264 Providing and fixing tiled false ceiling of specifiedmaterials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (DSR 12.58) 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. (DSR 12.58.1) 265 Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: (DSR 12.59) 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. (DSR 12.59.1) 266 Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloyIS designation31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). (DSR 12.64) 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. (DSR 12.64.1) 267 Providing and fixing of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : (DSR 12.66) Precoated/mill finish aluminium Ridges plain (500- 600mm) (DSR 12.66.1) 268 Providing and fixing of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : (DSR 12.66) Precoated/mill finish aluminium Crimp curve (DSR 12.66.5) 269 Providing and fixing of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : (DSR 12.66) Precoated/mill finish aluminium Gutter (600 mm over all girth) (DSR 12.66.6) 270 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:4 (1 cement: 4 coarse sand) (DSR 13.4.1) 271 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:6 (1 cement: 6 coarse sand) (DSR 13.4.2) 272 12 mm cement plaster finished with a floating coat of neat cement of mix : (DSR 13.7) 1:4 (1 cement: 4 fine sand) (DSR 13.7.2) 273 6 mm cement plaster of mix : (DSR 13.16) 1:3 (1 cement : 3 fine sand) (DSR 13.16.1) 274 Neat cement punning. (DSR )(DSR 13.18) 275 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. (DSR )(DSR 13.21) 276 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : (DSR 13.41) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre (DSR 13.41.1) 277 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.46) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR 13.46.1) 278 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: (DSR 13.47) New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR 13.47.1) 279 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (DSR 13.48) Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (DSR 13.48.1) 280 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (DSR 13.48) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (DSR 13.48.2) 281 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (DSR 13.48) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture (DSR 13.48.3) 282 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shadewith silicon additives. (DSR 13.48A) New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (DSR 13.48A.1) 283 Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively. (DSR )(DSR 13.59) 284 Lettering with black Japan paint of approved brand and manufacture (DSR )(DSR 13.71) 285 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR )(DSR 13.80) 286 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturerincluding applying additional coats wherever required to achieve even shade and colour(DSR 13.81) Old work (one or more coats) (DSR 13.81.1) 287 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (DSR 13.82) One coat (DSR 13.82.1) 288 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (DSR 13.82) Two coats (DSR 13.82.2) 289 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (DSR 13.83) One coat (DSR 13.83.1) 290 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (DSR 13.83) Two coats (DSR 13.83.2) 291 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. (DSR 13.85) With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre (DSR 13.85.1) 292 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. (DSR 13.85) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre (DSR 13.85.3) 293 White washing with lime to give an even shade : (DSR 13.87) Old work (two or more coats) (DSR 13.87.1) 294 White washing with lime to give an even shade : (DSR 13.87) Old work (one or more coats) (DSR 13.87.2) 295 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR )(DSR 13.88) 296 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR )(DSR 13.91) 297 Painting with oil type wood preservative of approved brand and manufacture: (DSR 13.97) Old work (one or more coats) (DSR 13.97.1) 298 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (DSR 13.99) One or more coats on old work (DSR 13.99.1) 299 Re-lettering with black Japan paint of approved brand and manufacture. (DSR )(DSR 13.105) 300 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. (DSR )(DSR 13.106) 301 Finishing walls with textured exterior paint of required shade : (DSR 13.11) Old work (One or more coats) applied @ 1.82 ltr/10 sqm. (DSR 13.110.2) 302 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (DSR 13.111.1) 303 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (One or more coat applied @ 0.90 ltr/10 sqm). (DSR 13.111.2) 304 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (DSR 13.112) Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface (DSR 13.112.1) 305 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (DSR 13.112) Old work (one or more coats applied @ 0.83 ltr/10 sqm). (DSR 13.112.2) 306 Varnishing with varnish of approved brand and manufacture: (DSR 13.113) One or more coats with copal varnish (DSR 13.113.1) 307 Melamine polishing on wood work (one or more coat). (DSR )(DSR 13.114) 308 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1.The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) (DSR )(DSR 13.116) 309 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.2) Door chowkhats (DSR 14.2.1) 310 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.2) Window chowkhats (DSR 14.2.2) 311 Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. (DSR )(DSR 14.3) 312 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.4) For door/ window/ clerestory window (DSR 14.4.1) 313 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (DSR 14.5) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.5.1) 314 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (DSR 14.5) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (DSR 14.5.2) 315 Renewing glass panes and refixing existing wooden fillets: (DSR 14.7) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.7.1) 316 Renewing glass panes and refixing existing wooden fillets: (DSR 14.7) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (DSR 14.7.2) 317 Supplying and fixing new wooden fillets wherever necessary: (DSR 14.8) Hollock wood fillets (DSR 14.8.2) 318 Renewal of old putty of glass panes (length) (DSR )(DSR 14.9) 319 Refixing old glass panes with putty and nails (DSR )(DSR 14.10) 320 Fixing old glass panes with wooden fillets (excluding cost of fillets) (DSR )(DSR 14.11) 321 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. (DSR )(DSR 14.12) 322 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR )(DSR 14.17) 323 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. (DSR 14.22) Wheel 50 mm dia and below (DSR 14.22.1) 324 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. (DSR 14.22) Wheel above 50 mm dia (DSR 14.22.2) 325 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. (DSR )(DSR 14.23) 326 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Panelled or panelled & glazed shutters : 14.26.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.1.1) 327 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Panelled or panelled & glazed shutters : 14.26.1 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.1.2) 328 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Glazed shutters : 14.26.2 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.2.1) 329 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Glazed shutters : 14.26.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.2.2) 330 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. (DSR )(DSR 14.29) 331 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 125x70x4 mm (ordinary type) (DSR 14.40.1) 332 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 100x70x4 mm (ordinary type) (DSR 14.40.2) 333 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 75x65x4 mm (heavy type) (DSR 14.40.3) 334 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 75x40x2.5 mm (ordinary type) (DSR 14.40.4) 335 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 50x40x2.5 mm (ordinary type) (DSR 14.40.5) 336 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. (DSR )(DSR 14.41) 337 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) (DSR )(DSR 14.75A) 338 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. (DSR )(DSR 14.76) 339 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm(DSR )(DSR 14.77) 340 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consistfollowing operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and otherdeposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. (DSR )(DSR 14.78) 341 Disconnecting damaged overhead/terrace PVC water storage tankof any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. (DSR )(DSR 14.79) 342 Providing & fixing White vitreous china water closet squatting pan (Indian type) along withS or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (DSR 14.8) Orissa pattern W.C Pan of size 580x440 mm (DSR 14.80.2) 343 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 14.81) 344 DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (DSR )(DSR 14.82) 345 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. (DSR )(DSR 14.83) 346 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall (DSR )(DSR 14.84) 347 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. (DSR )(DSR 14.85) 348 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (DSR 15.2) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) (DSR 15.2.2) 349 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (DSR )(DSR 15.3) 350 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 15.7) In cement mortar (DSR 15.7.4) 351 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): (DSR 15.8) From brick work in cement mortar (DSR 15.8.3) 352 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (DSR 15.12) Of area 3 sq. metres and below (DSR 15.12.1) 353 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (DSR 15.12) Of area beyond 3 sq. metres (DSR 15.12.2) 354 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : (DSR 15.13) Of area 3 sq. metres and below (DSR 15.13.1) 355 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : (DSR 15.13) Of area beyond 3 sq. metres (DSR 15.13.2) 356 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: (DSR 15.17) R.S. Joists (DSR 15.17.1) 357 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: (DSR 15.17) Channels, angles, tees and flats (DSR 15.17.2) 358 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. (DSR )(DSR 15.18) 359 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.19) 360 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : (DSR )(DSR 15.24) 361 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (DSR 15.28) G.S. Sheet (DSR 15.28.1) 362 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (DSR 15.28) Asbestos Cement sheet (DSR 15.28.2) 363 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. (DSR )(DSR 15.36) 364 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (DSR 15.44) 15 mm to 40 mm nominal bore (DSR 15.44.1) 365 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (DSR 15.44) Above 40 mm nominal bore (DSR 15.44.2) 366 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: (DSR 15.45) Up to 150 mm diameter (DSR 15.45.1) 367 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.48) 368 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.49) 369 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR )(DSR 15.52) 370 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres (DSR 15.53) Up to 150 mm diameter (DSR 15.53.1) 371 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. (DSR )(DSR 15.54) 372 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR )(DSR 15.56) 373 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. (DSR )(DSR 15.57) 374 Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. (DSR )(DSR 15.58) 375 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR )(DSR 15.60) 376 Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. (DSR 16.7) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 16.7.1) 377 Brick edging laid lengthwise with half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres : (DSR 16.8) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 16.8.1) 378 Supplying at site : (DSR 16.15) R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). (DSR 16.15.1) 379 Supplying at site : (DSR 16.15) Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). (DSR 16.15.2) 380 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. (DSR 16.17) With G.I. barbed wire (DSR 16.17.1) 381 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. (DSR 16.18) With G.I. barbed wire (DSR 16.18.1) 382 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (DSR )(DSR 16.19) 383 Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. (DSR 16.31) With medium setting bitumen emulsion 16.31.2 On bituminous surface @ 0.25kg/sqm (DSR 16.31.2.2) 384 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). (DSR 16.33) With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt (DSR 16.33.1) 385 Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. (DSR )(DSR 16.40) 386 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. (DSR )(DSR 16.42) 387 Extra for providing and mixing hardening compound of approved quality as per manufacturers specification in cement concrete. (DSR )(DSR 16.44) 388 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) (DSR )(DSR 16.45) 389 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) (DSR )(DSR 16.53) 390 Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 16.64) 391 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 16.67) 392 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (DSR )(DSR 16.68) 393 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR )(DSR 16.69) 394 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (DSR 16.7) Made of G.I. wire of dia 4 mm (DSR 16.70.1) 395 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). (DSR )(DSR 16.75) 396 Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. (DSR )(DSR 16.76) 397 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. (DSR 16.78) With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 (DSR 16.78.2) 398 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. (DSR )(DSR 16.83) 399 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). (DSR )(DSR 16.84) 400 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (DSR )(DSR 16.89) 401 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. (DSR 16.91.1) 402 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. (DSR 16.91.2) 403 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (DSR 17.1) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR 17.1.1) 404 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (DSR 17.2) W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.2.1) 405 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (DSR 17.3) W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.3.1) 406 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (DSR 17.7.3) 407 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (DSR 17.7.4) 408 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked (DSR 17.7.9) 409 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap (DSR 17.7.11) 410 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a)White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (DSR )(DSR 17.7A) 411 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: (DSR 17.9) White glazed fire clay kitchen sink of size 600x450x 250 mm (DSR 17.9.1) 412 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (DSR 17.1) Kitchen sink with drain board510x1040 mm bowl depth 200 mm (DSR 17.10.1.3) 413 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (DSR 17.1) Kitchen sink without drain board 17.10.2 610x510 mm bowl depth 200 mm (DSR 17.10.2.1) 414 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. (DSR )(DSR 17.15) 415 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (DSR )(DSR 17.16A) 416 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (DSR 17.18) 10 litre capacity - White (DSR 17.18.1) 417 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : (DSR 17.2) White solid plastic seat with lid (DSR 17.20.1) 418 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (DSR )(DSR 17.22A) 419 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia (DSR )(DSR 17.22B) 420 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. (DSR )(DSR 17.23) 421 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. (DSR )(DSR 17.24) 422 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 630x450 mm (DSR 17.25.1) 423 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 550x400 mm (DSR 17.25.2) 424 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 450x300 mm (DSR 17.25.5) 425 Providing and fixing kitchen sink including making all connections excluding cost of fittings. (DSR 17.26) White glazed fire clay sink of size 600x450x250 mm (DSR 17.26.1) 426 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR 17.28) Semi rigid pipe 17.28.1 32 mm dia (DSR 17.28.1.1) 427 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR 17.28) Flexible pipe 17.28.2 32 mm dia (DSR 17.28.2.1) 428 Providing and fixing 100 mm sand cast Iron grating for gully trap. (DSR )(DSR 17.29) 429 Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. (DSR )(DSR 17.30) 430 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR )(DSR 17.31) 431 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. (DSR )(DSR 17.33) 432 Providing and fixing toilet paper holder : (DSR 17.34) C.P. brass (DSR 17.34.1) 433 Providing and fixing toilet paper holder : (DSR 17.34) Vitreous china (DSR 17.34.2) 434 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. (DSR 17.69) Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms (DSR 17.69.1) 435 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. (DSR 17.69) Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms (DSR 17.69.2) 436 Providing and fixing PTMT Bottle Trap for Wash basin and sink. (DSR 17.7) Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms (DSR 17.70.1) 437 Providing and fixing PTMT Bottle Trap for Wash basin and sink. (DSR 17.7) Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms (DSR 17.70.2) 438 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (DSR )(DSR 17.71) 439 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. (DSR )(DSR 17.72) 440 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (DSR 17.73) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms (DSR 17.73.1) 441 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (DSR 17.73) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (DSR 17.73.2) 442 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. (DSR )(DSR 17.74) 443 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. (DSR )(DSR 17.75) 444 Providing and fixing PTMT urinal cock of approved quality and colour. (DSR 17.76) 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms (DSR 17.76.1) 445 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. (DSR 17.77) Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe) (DSR 17.77.1) 446 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (DSR )(DSR 17.78) 447 Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. (DSR )(DSR 17.79) 448 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (DSR )(DSR 17.80) 449 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (DSR )(DSR 17.81) 450 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work, including cutting chases and making good the walls etc.) (DSR 18.8) 20 mm nominal dia Pipes (DSR 18.8.2) 451 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work, including cutting chases and making good the walls etc.) (DSR 18.8) 25 mm nominal dia Pipes (DSR 18.8.3) 452 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 15 mm nominal dia Pipes (DSR 18.9.1) 453 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 20 mm nominal dia Pipes (DSR 18.9.2) 454 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 25 mm nominal dia Pipes (DSR 18.9.3) 455 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 32 mm nominal dia Pipes (DSR 18.9.4) 456 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 40 mm nominal dia Pipes (DSR 18.9.5) 457 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 50 mm nominal dia Pipes (DSR 18.9.6) 458 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 80 mm nominal dia Pipes (DSR 18.9.8) 459 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work (DSR 18.12) 80 mm dia nominal bore (DSR 18.12.8) 460 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : (DSR 18.13) 25 to 40 mm nominal bore (DSR 18.13.1) 461 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : (DSR 18.13) 50 to 80 mm nominal bore (DSR 18.13.2) 462 Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). (DSR )(DSR 18.14) 463 Providing and fixing brass bib cock of approved quality : (DSR 18.15) 15 mm nominal bore (DSR 18.15.1) 464 Providing and fixing brass bib cock of approved quality : (DSR 18.15) 20 mm nominal bore (DSR 18.15.2) 465 Providing and fixing brass stop cock of approved quality : (DSR 18.16) 15 mm nominal bore (DSR 18.16.1) 466 Providing and fixing brass stop cock of approved quality : (DSR 18.16) 20 mm nominal bore (DSR 18.16.2) 467 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 25 mm nominal bore (DSR 18.17.1) 468 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 20 mm nominal bore (DSR 18.17.1A) 469 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 32 mm nominal bore. (DSR 18.17.2) 470 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 40 mm nominal bore (DSR 18.17.3) 471 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 80 mm nominal bore (DSR 18.17.6) 472 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 25 mm nominal bore 18.19.1 Horizontal (DSR 18.19.1.1) 473 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 25 mm nominal bore 18.19.1 Vertical (DSR 18.19.1.2) 474 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 32 mm nominal bore 18.19.2 Horizontal (DSR 18.19.2.1) 475 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 32 mm nominal bore 18.19.2 Vertical (DSR 18.19.2.2) 476 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 40 mm nominal bore 18.19.3 Horizontal (DSR 18.19.3.1) 477 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 40 mm nominal bore 18.19.3 Vertical (DSR 18.19.3.2) 478 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 80 mm nominal bore 18.19.6 Vertical (DSR 18.19.6.2) 479 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 30 cm length 18.21.1 15 mm nominal bore (DSR 18.21.1.1) 480 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 30 cm length 18.21.1 20 mm nominal bore (DSR 18.21.1.2) 481 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 45 cm length 18.21.2 15 mm nominal bore (DSR 18.21.2.1) 482 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 45 cm length 18.21.2 20 mm nominal bore (DSR 18.21.2.2) 483 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (DSR 18.22) 100 mm diameter (DSR 18.22.1) 484 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (DSR 18.22) 150 mm diameter (DSR 18.22.2) 485 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : (DSR 18.27) 100 mm dia pipe (DSR 18.27.1) 486 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : (DSR 18.28) 100 mm diameter pipe (DSR 18.28.1) 487 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : (DSR 18.3) 80 mm diameter pipe (DSR 18.30.1) 488 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : (DSR 18.3) 100 mm diameter pipe (DSR 18.30.2) 489 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : (DSR 18.31) 100 mm diameter 18.31.1 Class I (DSR 18.31.1.1) 490 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : (DSR 18.31) 100 mm diameter 18.31.1 Class II (DSR 18.31.1.2) 491 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR )(DSR 18.48) 492 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (DSR 18.62) 20 mm nominal bore, 120 mm long, weighing not less than 198 gms (DSR 18.62.2) 493 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms (DSR )(DSR 18.63) 494 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms (DSR )(DSR 18.64) 495 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (DSR )(DSR 18.65) 496 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. (DSR 18.84) 15 mm nominal bore (DSR 18.84.1) 497 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : (DSR 19.5) 100 mm diameter (DSR 19.5.1) 498 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : (DSR 19.6) 150 mm dia. R.C.C. pipe (DSR 19.6.2) 499 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : (DSR 19.6) 300 mm dia. R.C.C. pipe (DSR 19.6.4) 500 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. (DSR 19.32) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 19.32.1) 501 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. (DSR )(DSR 19.33) 502 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.1.1) 503 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.1.2) 504 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.1.3) 505 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.2.1) 506 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.2.2) 507 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.2.3) 508 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) (DSR 21.3.1) 509 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (DSR 21.3.2) 510 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) (DSR 21.3.3) 511 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With stainless steel cover plate minimum 1.25 mm thickness (DSR 21.4.1) 512 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With brass cover plate minimum 1.25 mm thickness (DSR 21.4.2) 513 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). (DSR )(DSR 21.5) 514 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge. (DSR )(DSR 21.6) 515 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. (DSR 21.8) Upto 5mm depth and 5 mm width (DSR 21.8.1) 516 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. (DSR 21.9) For fixed portion (DSR 21.9.1) 517 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. (DSR 21.9) For shutters of doors, windows & ventilators (DSR 21.9.2) 518 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). (DSR )(DSR 21.14) 519 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). (DSR )(DSR 21.17) 520 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (DSR )(DSR 21.18) 521 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11601 (DSR 21.19) Upto 5 mm depth and 5 mm width (DSR 21.19.1) 522 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11602 (DSR 21.19) Upto 10 mm depth and 10 mm width (DSR 21.19.2) 523 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) (DSR )(DSR 22.5) 524 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck ,using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturers specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (DSR )(DSR 22.22) 525 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. (DSR 23.1) All types of soil 23.1.1 300 mm dia (DSR 23.1.1.1) 526 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. (DSR 23.2) All types of soil 23.2.1 350 mm dia (DSR 23.2.1.2) 527 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. (DSR 23.3) 150 mm nominal size dia (DSR 23.3.2) 528 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (DSR 23.4) 150 mm nominal size dia (DSR 23.4.2) 529 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR )(DSR 23.5) 530 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR )(DSR 23.6) 531 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. (DSR )(DSR 23.7) 532 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (DSR )(DSR 23.8) 533 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (DSR )(DSR 23.12) 534 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: (DSR 23.13) 150 mm dia (DSR 23.13.2) 535 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. (DSR 23.14) 150 mm clamp (DSR 23.14.2) 536 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). (DSR 23.15) 150 mm dia (DSR 23.15.2) 537 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. (DSR )(DSR 25.1) 538 Providing and fixing factory madeKitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardenthaving necessary screw holding capacity.Shutter shall be fixed to frame usingapproved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. (DSR )(DSR 26.10) 539 Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : (DSR )(DSR 26.11) 540 Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq mm frls pvc insulated copper conductor single core cable in surface /recessed medium class pvc conduit , with modular switch ,modular plate, suitable GI box and earething the pint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (DSR E&M 1.10)Group A (DSR E&M 1.10.1) 541 Wiring for light/power plug with 2x4 sq. mm FRLS PVC insulatted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (DSR E&M 1.12) 542 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x2.5sq. Mm + 1x2.5 sq. mm eartrh wire (DSR E&M 1.14.2) 543 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x4sq. Mm + 1x4 sq. mm eartrh wire (DSR E&M 1.14.3) 544 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (DSR E&M 1.21) 25mm (DSR E&M 1.21.2) 545 Supplying and fixing 6way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240V, on Surface/recess,complete with tinned copper bus bar, heutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But with MCB/RCCB/Isolator) (DSR E&M 2022 2.3.1) 546 Supplying and fixing 5 amps to 32 amps rating,Single pole, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR E&M 2022 2.10.1) 547 Supplying and fixing 63 amps, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(DSR E&M 2022 2.12.2) 548 Supplying and fixing 63 A, four pole, 415V, isolator in the existing MCB DB Complete with connections, testing and commissioning etc. as required. (DSR E&M 2022 2.13.2) 549 Earthing with G.I earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR E&M 2022 5.2) 550 Smoke Detector with built in LED, mounting base complete with all connection etc. (DSR E&M 2022 4102) 551 Manual call boxes of MS Type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. (DSR E&M 2022 4103) 552 Manual call boxes of ABS Type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. (DSR E&M 2022 4104) 553 Response indicator on surface/recessed MS Box having two LEDs metallic covers complete with all connections etc.(DSR E&M 2022 4105) 554 Fire alarm sounders (electronic) with facility to make announcement, mounted in M.S. Box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. (DSR E&M 2022 4106) 555 Fire alarm sounders (electronic) with facility to make announcement, mounted in A,B.S. Box with hinged cover plate & suitable for operation with amplifier l/c line matching ttransformer etc. (DSR E&M 2022 4107) 556 Talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. Knob & speaker/microphone enclosed in a M.S (16 SWG)/ABS.Box, break glass in front etc. (DSR E&M 2022 4108) 557 6 Zone fire alarm control panel as per IS: 2189 with backlit LCD (DSR E&M 2022 4110) 558 Cost of25 mm outer dia PVC/ABS Pipe with end caps including making air sampling operning of appropriate dia on appropriate interval. (DSR E&M 2022 4143) 559 Cost of fire survival armoured cable, fibre, fibre glass tape wrapped, ZH inner, outer sheath 2x1.5 sq. mm cable(DSR E&M 2022 4144) 560 Cost of fire alarm armoured FRLS cable 2 x 1.5 sqmm (DSR E&M 2022 4145) 561 Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required (DSR E&M 2022 19.1) 562 Concrete with 4cm gauge I class brick ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) 563 Concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 including cost of all labour, materials, T&P etc required for proper completion of work. (CSI No. 5.20) 564 Brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.18) 565 Brick work in Super structure with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.19) 566 S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . exept cost of M.S angle and flat. (CSI No. 9.22) 567 Providing and laying SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.29 c) 110 mm dia 568 Supply and Fixing of 3 blade wall fan of Havells platina 400 mm or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge. (CSI No. 28.37) 569 Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.(CSI No. 28.38) 570 Supply & fixing steel tubular pole 7 Metre long designated 410 SP-2 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 2018 PWD 603 571 Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 2018 PWD 641 572 Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 2018 PWD 642 573 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 2018 PWD 1131 574 Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 2018 PWD 1131(A) 575 Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 2018 PWD 1132 576 Same as in item no. 1132 but of 6..5 kg. capacity 2018 PWD 1132 (A) 577 Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge 2018 PWD 1133 578 Supply and fixing of power plug with 15A/250 voltflushtype switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mmsize with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 2018 PWD 1139 579 Supply and fixing ofLED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. 2018 PWD 1413(A)CAT AA 580 Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. 2018 PWD 1421CAT AA 581 Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 175 to 200 Watt. Confirming to IP 66Protection complete in all respects.2018 PWD 1425(A)CAT AA 582 Supply and fixing of3 Watt LED Path / Walkover luminaire having powder cotated die cast aluminium body with drive set . Confirming to IP 65 Protection complete in all respect. 2018 PWD 1441CAT AAA 583 Supply and fixing of 3 Watt to 6 Watt LED Spot/Spike light luminaire Confirming to IP 66 Protection complete in all respect. 2018 PWD 1441 (A) CAT AAA 584 Supply and fixing ofdecorative 8 to 16 Watt LEDbollard luminaire with driver set confirming to IP 65 protection complete in all respect. 2018 PWD 1442CAT AAA 585 Supply and fixing ofdecorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and aboveprotection complete in all respect.2018 PWD 1443CAT AAA 586 Supply and fixing of 450mm size Exhaust fan of approved quality ISI mark (Bajaj/Havells/Usha/Crompton or equivalent make) complete with all respect as per sample approved by Engineer in charge including supply of all materials, labour and T&P etc requried for proper completion of the work as direction of E/I complete. (NSI ) 587 S/F of LED Bulb 9Watt bajaj or equivalent make as approved sample and make as per direction of Engineer in charge (NSI) 588 Supply and fixing of 200 mm Turbo ventilator Fan with ss Chimneycap & pipe of approved quality ISI mark (Bajaj/Havells/Usha/Crompton or equivalent make) complete with all respect as per sample approved by Engineer in charge including supply of all materials, labour and T&P etc requried for proper completion of the work as direction of E/I complete. (NSI ) 589 Providing and fixing 15 mm thick Industrial tiles size 600 x 600 mm to of Johnson Endura Meteor or approved make and colour using in different sizes (thickness to be specified by the manufacturer) conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(NSI) 590 20-25 mm thick fine dressed Red sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.(NSI) 591 Providing/Laying 20-25 mm thick fine dressed Red sand stone flooring including supply of all materials, labour and T&P required for proper completion of work as perdirection of the Engineer-in charge.(NSI) 592 Providing and fixing prefab structure of size which does not require any structural steel frame at all heights of the existing building with following specifications: Manufactured by Epack polymers pvt ltd /Pronto panels Or Equivalent make.Walls: Outer & Inner walls made of 50 mm thick PUF insulated panels cladded with 0.5 mm thick PCGI sheet zinc coating 120 grams per sqm as per IS: 277. The wall panels shall be connected to each other with Cam Locks @ 1.00 m C/C The walls shall be connected to the the base platform with 1mm thick channels & 100 to 150mm long dash fasteners. The walls & ceiling shall be connected to each other by 1mm thick flashing as per the manufacturer specifications. Any number of vertical partitions are to be provided in the structure as required at site & as per the directions of the E-in-C complete. All the inner / outer gaps, if any, are to be filled with silicon, rubber gasket or any material required complete & directions of the Engineer in charge.Ceiling: Made of 50 mm thick PUF insulated panels cladded with 0.5 mm thick PCGI sheet zinc coating 120 grams per sqm as per IS: 277. The ceiling shall be extended from the wall on all sides by not less than 450mm & not more than 600mm with neccessary slopes in wall as required at the site & directions of the Engineer in charge complete. The outer edges of the roof shall be covered with the channel of the same material as of puff panel.Doors: Made out of 50 mm thick PUF insulated panels inner/outer side cladded with 0.5 mm thick PCGI sheet zinc coating 120 grams per sqm as per IS: 277. complete with providing & fixing all accessories like locks, SS hinges, SS Tower Bolts,SS handles of required size not more than 300mm.Windows: The frame work shall be of aluminium work (Powder coated aluminium (minimum thickness of powder coating 50 micron)) for doors, windows(Sliding/Openable as required with requisite handles, tower bolts,20mm dia SS curtain rod & any other fitting required ), ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be of thickness not less than 14gauge, smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing with 5.50mm thick glass / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. The outer surface shall have fly proof stainless steel grade 304 wire gauge, using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete .Strengthing of door, window, ventilators & any other opening : Any opening provided will have the framework strengthened with 1mm thick MS Plate on all sides all complete & directions of the Engineer in charge.Measurements: Only the floor area of the pre fab outer structure will be measured for payment purpose.Conditions Rates include all lifts, leads, depths, material, labour, scaffolding, all heights for location, carriage, wastage, tools and plants and other all inputs for execution of the item. The colour of the panels for walls & ceiling should be got approved from the E-in-C prior to start of manufacturing of the structure. The Structure requires approx five partitions in the two structures besides two outer walls . Note: The zinc sheet of the puff panels can either be plain/corrugated on both sides or one side plain & one side corrugated upto any pitch in horizontal / verticals per the drawings & requirement at site. 593 Supply,Installation, testing & commissioning Battery 12 V 7 AH Exide or equivalent make for above fire alarm system. Complete as per direction of the Engineer-in charge. 594 Supply,Installation, testing & commissioning Response Indicator Agni Suraksha or equivalent make. Complete as per direction of the Engineer-in charge. 595 Supply,Installation, testing & commissioning Camera (3 MP) colour W Audio IP Dome Secureye or equivalent Indian make ,Lens-3.6mm. Complete as per direction of the Engineer-in charge. 596 Supply,Installation, testing & commissioning Camera (2 MP) IP Dome Falcon series Secureye or equivalent Indian make ,Lens-3.6mm. Complete as per direction of the Engineer-in charge. 597 Supply,Installation, testing & commissioning NVR 8 channelSecureye or equivalent Indian make, with 4TBHDD Hard Disk. Complete as per direction of the Engineer-in charge. 598 Supply,Installation, testing & commissioning Connector D link or equivalent make Complete as per direction of the Engineer-in charge. 599 Supply,Installation, testing & commissioning 8 Port POE Switch Secureye or equivalent Indian make Complete as per direction of the Engineer-in charge. 600 Supply,Installation, testing & commissioning Cable (CAT6) D link or equivalent make Complete as per direction of the Engineer-in charge. 601 Servicing of Air Conditioner (For Window/Split) by aurthorised service center complete in all respect including all labour and T&P. (CSI No. 20.30) 602 Servicing of Air Conditioner and filling of GAS (For Window/Split) by aurthorised service center complete in all respect including all labour and T&P. (CSI No. 20.31) 603 Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver setcomplete in all respect. 1401 PWD CAT AA 604 Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. 1402 PWD CAT AA 605 Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.1406 PWD CAT AA 606 P/F of 30 W orevo make or equivalent make LED light 30 Watt over Hoarding frame along boundary wall of MD DVVNL Campus, 220 KV S/S Sikandra , Agra with necessary materials , labour, T&P etc required for proper completion of the work as per direction of Engineer in charge. (NSI) 607 Providing and fixing of 20 W Philips make or equivalent make LED Tube light 20 Watt with necessary materials labour, T&P etc requried for proper completion of the work as per direction of Engineer in charge (NSI) 608 S/F of 07 Watt LED bulb Syska or other equivalent make including cost of labour, T&P etc required for proper completion of the work (NSI) 609 Supply and fixing of vertical blinds with hanging/sliding rod of aluminium (vista or equivalent make), vertical cord for operation of blinds, L-type hooks, screws, gullies etc. including all T&P, labour etc required for proper completion of the work in all respect. (NSI) 610 Printing name and designation of occupants and other information on residence block/office building including preparation of the base with best quality synthetic enamel paint as directed by E/I including cost of all materials, labour and T&P etc. required for proper completion of work. (NSI) 611 Providing and fixing of Name plate Acrylic/Glow sign Sheet per mm thick without letter as per approved shade and design as per direction of Engineer in charge (NSI) 612 Providing and Pasting of Name plate letter cutting words laser machine without name plate including cost of necessary all fittings such as nut, screws, labour T&P etc requried for proper completion of the work as per direction of Engineer in charge (NSI)
Contract Date: Apr 23, 2026 Contract Value : ₹ 21.94 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
2.
New and Renewable Energy #10053821 Price Bid
Rate Contract For Spares For Eimco Elecon Make Equipment Rate Contract For Spares For Eimco Elecon Make Equipment , Rate Contract For Spares For Eimco Elecon Make Equipment , Arm Assembly Part No917a070000001 Model 907 , Bush,Metric Part Nombh100/116/70A Model 907 , Bush (Metric) Part Nombh100/116/50A Model 907 , Pin Part No917a060000007 Model 907 , Lock Plate Part No917a060000001 Model 907 , Hex Socket Head Cap Screw Part No370-2411 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Grease Nipple Part Nobp1fg Model 907 , Pin Part No917a060000014 Model 907 , Lock Plate Part No917a060000005 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Bush Part Nombh125_135_101 Model 907 , Lever Assembly Part No917a070000002 Model 907 , Bush (Metric) Part Nombh125/145/85A Model 907 , Bush (Metric) Part Nombh90/106/100A Model 907 , Pin Part No917a060000008 Model 907 , Lock Plate Part No917a060000002 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Grease Nipple Part Nobp1fg Model 907 , Bush Part Nombh90_98_60 Model 907 , Link Assembly Part No917a070000006 Model 907 , Pin Part No917a060000009 Model 907 , Lock Plate Part No907a060000006 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Grease Nipple Part Nobp1fg Model 907 , Bush(Metric) Part Nombh90/106/60A Model 907 , Push Plate Bucket Assy. Part No907b070000063 Model 907 , Bucket Lip Part Noeea0032174 Model 907 , Twisting Bumper Part No19wl429091510 Model 907 , Spacer Part No19wl425091303 Model 907 , Washer Part No19wl425091304 Model 907 , Hex Head Screw Part Nomt12lg40g Model 907 , Plate Part Noeea0005530 Model 907 , Locking Ring Part Noeea0002017 Model 907 , Lock Ring Part Nossla020000023 Model 907 , Push Plate Upper Mac. Part No907b020000089 Model 907 , Push Plate Lower Part No907b020000090 Model 907 , Pin, Push Plate Lower Part No907a060000008 Model 907 , Pin, Push Plate Upper Part No907a060000009 Model 907 , Hex Head Bolt Part Nomt10lg65g Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut, Nyloc Part Nomt10ln Model 907 , Push Plate Cylinder Part No907b050000080 Model 907 , Tube S/A-2 Part Noeea0032090 Model 907 , Piston Rod S/A Part Noeea0032091 Model 907 , Head End Cover Part Noeea0032092 Model 907 , Piston Part Noeea0028785 Model 907 , Retainer Part Noeea0028786 Model 907 , Snap Ring Part Noeea0028787 Model 907 , Grub Screw, Piston Part Noeea0024567 Model 907 , Gub Screw Part Noeea0023564 Model 907 , Circlip Part Noeea0022817 Model 907 , Spherical Bearing Part Nostdc003/036 Model 907 , Grease Nipple With Cap Part Noeea0020796 Model 907 , Bush Part Noeea0023556 Model 907 , Piston Seal Ring (*) Part Noeea0023563 Model 907 , Piston Wiper Ring (*) Part Noeea0023562 Model 907 , Piston Rod O-Ring (*) Part Noeea0023561 Model 907 , Back Up Ring (*) Part Noeea0023560 Model 907 , O-Ring (*) Part Noeea0023555 Model 907 , O-Ring (*) Part Noeea0023554 Model 907 , Step Seal (*) Part Noeea0023558 Model 907 , Rod Seal (*) Part Noeea0023559 Model 907 , Wiper Seal (*) Part Noeea0023747 Model 907 , Seal Kit (* Items ) Part Noeea0032093 Model 907 , Pin (Bucket) Part No907a060000004 Model 907 , Pin, Upper Push Plate Part No907a060000007 Model 907 , Pin Part No917a060000010 Model 907 , Bush (Metric) Part Nombh100/116/55A Model 907 , Bush (Metric) Part Nombh90/106/100A Model 907 , Spacer Part No811a060000106 Model 907 , Lock Plate Part No907a060000010 Model 907 , Grease Nipple Part Nobp1fg Model 907 , Hex Socket Head Cap Screw Part No370-2309 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Hex Head Bolt Part No370-0326 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut, Nyloc Part Nomt10ln Model 907 , Front Frame Assembly Part No917a070000003 Model 907 , Locking Ring Part Noeea0003926 Model 907 , Pin Assy. Part No917a020000001 Model 907 , Pin Part No917a060000017 Model 907 , Chain Part No103451 Model 907 , Hex Socket Head Cap Screw Part No370-2409 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Pin Part No917a060000015 Model 907 , Hex Socket Head Cap Screw Part No370-2329 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut Part No369-0110 Model 907 , Pin Part No917a060000012 Model 907 , Lock Plate Part No907a060000011 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Grease Nipple Part Nobp1fg Model 907 , Pin Part No917a060000013 Model 907 , Lock Plate Part No917a060000002 Model 907 , Lock Plate Part No917a060000004 Model 907 , Pin Part No917a060000011 Model 907 , Spherical Bearing Part Nostdc003/056 Model 907 , Seal Part Noseg251 Model 907 , O Ring Part Noseg1099 Model 907 , Hex Socket Head Cap Screw Part No370-2232B Model 907 , Wear Washer Part No912b060000117 Model 907 , Plate Part Noeea0024855 Model 907 , Bush (Metric) Part Nombh70/82/100A Model 907 , Bush Part Nombh100_110_64 Model 907 , Bush Part Nombh100_110_68 Model 907 , Bush Part Nombh90_100_78 Model 907 , Bush Part Nombh90_100_82 Model 907 , Wheel Arch Lh Part No917a020000010 Model 907 , Wheel Arch Rh Part No917a020000011 Model 907 , Guard Part No917a020000012 Model 907 , Clamp Part No917a020000009 Model 907 , Front Axle Part No917b050000011 Model 907 , Axle Housing Part Noeea0025425 Model 907 , Breather Part Noeea0025426 Model 907 , Screw Plug Part Noeea0025427 Model 907 , Sealing Ring Part Noeea0025428 Model 907 , Screw Plug Part Noeea0025429 Model 907 , Sealing Ring Part Noeea0025430 Model 907 , Axle Shaft Part Noeea0025431 Model 907 , Wheel Stud Part Noeea0025434 Model 907 , Ring Part Noeea0025435 Model 907 , Radial Seal Ring Part Noeea0025436 Model 907 , Radial Seal Ring Part Noeea0025437 Model 907 , Tapered Roller Bearing Part Noeea0025438 Model 907 , Tapered Roller Bearing Part Noeea0025439 Model 907 , Ring Part Noeea0025440 Model 907 , Nut Part Noeea0025441 Model 907 , Hexagon Socket Screw Part Noeea0025442 Model 907 , O-Ring Part Noeea0025443 Model 907 , Sealing Ring Part Noeea0025444 Model 907 , Inner Disk Part Noeea0025445 Model 907 , Outer Disk Part Noeea0025446 Model 907 , Brake Group Kit Part No907a070000085 Model 907 , Piston Part Noeea0025447 Model 907 , Gasket Part Noeea0025448 Model 907 , Gasket Part Noeea0025449 Model 907 , Brake Carrier Part Noeea0025450 Model 907 , Brake Housing Part Noeea0025451 Model 907 , O-Ring Part Noeea0025452 Model 907 , O-Ring Part Noeea0025453 Model 907 , O-Ring Part Noeea0025454 Model 907 , Hexagon Socket Screw Part Noeea0025455 Model 907 , Hexagon Socket Screw Part Noeea0025456 Model 907 , Face Seal Part Noeea0025457 Model 907 , Screw Plug Part Noeea0025458 Model 907 , Sealing Ring Part Noeea0025459 Model 907 , Bleeding Socket Part Noeea0025460 Model 907 , Sealing Ring Part Noeea0025461 Model 907 , Bleeder Valve Part Noeea0025462 Model 907 , Compression Spring Part Noeea0025463 Model 907 , Compression Spring Part Noeea0025464 Model 907 , Intermediate Piece Part Noeea0025465 Model 907 , Piston Guide Ring Part Noeea0025466 Model 907 , Warning Label Part Noeea0025467 Model 907 , O-Ring Part Noeea0025468 Model 907 , Thread Bushing Part Noeea0025469 Model 907 , O-Ring Part Noeea0025472 Model 907 , Cap Part Noeea0025473 Model 907 , Planetary Housing Part Noeea0025474 Model 907 , O-Ring Part Noeea0025475 Model 907 , Screw Plug Part Noeea0025476 Model 907 , Disk Part Noeea0025480 Model 907 , Hexagon Socket Screw Part Noeea0025481 Model 907 , Sun Gear Part Noeea0025482 Model 907 , Bushing Part Noeea0025483 Model 907 , Hexagon Socket Screw Part Noeea0025484 Model 907 , Ring Part Noeea0025485 Model 907 , Planetary Gear Part Noeea0025486 Model 907 , Disk Part Noeea0025487 Model 907 , Ring Part Noeea0025488 Model 907 , Needle Bearing Part Noeea0025489 Model 907 , Planetary Pin Part Noeea0025490 Model 907 , Locking Pin Part Noeea0025491 Model 907 , Ring Gear Part Noeea0025492 Model 907 , Ring Gear Carrier Part Noeea0025493 Model 907 , Retainer Part Noeea0025494 Model 907 , Hexagon Screw Part Noeea0025495 Model 907 , O-Ring Part Noeea0025496 Model 907 , Differential And Carrier Assembly Part Noeea0025497 Model 907 , Drive Pinion Part Noeea0025498 Model 907 , Ring Gear Part Noeea0025499 Model 907 , Differential Housing Part Noeea0025500 Model 907 , Differential Spider Part Noeea0025502 Model 907 , Differential Side Gear Part Noeea0025503 Model 907 , Differential Pinion Part Noeea0025504 Model 907 , Bushing Part Noeea0025505 Model 907 , Hexagon Screw Part Noeea0025507 Model 907 , Tapered Roller Bearing Part Noeea0025508 Model 907 , Tapered Roller Bearing Part Noeea0025509 Model 907 , Differential Carrier Part Noeea0025510 Model 907 , Hexagon Screw Part Noeea0025511 Model 907 , Setting Ring Part Noeea0025512 Model 907 , Lock Plate Part Noeea0025513 Model 907 , Hexagon Screw Part Noeea0025515 Model 907 , Hexagon Screw Part Noeea0025516 Model 907 , Bolt Part Noeea0025517 Model 907 , Bolt Part Noeea0025518 Model 907 , Hexagon Nut Part Noeea0025519 Model 907 , Tapered Roller Bearing Part Noeea0025520 Model 907 , Bushing Part Noeea0025521 Model 907 , Tapered Roller Bearing Part Noeea0025522 Model 907 , Bearing Flange Part Noeea0025523 Model 907 , Cover Part Noeea0025524 Model 907 , Radial Seal Ring Part Noeea0025525 Model 907 , Hexagon Screw Part Noeea0025526 Model 907 , Compensation Plate Part Noeea0025527 Model 907 , Drive Flange Part Noeea0025528 Model 907 , Adjusting Nut Part Noeea0025529 Model 907 , Bearing Part Noeea0025530 Model 907 , Circlip Part Noeea0025531 Model 907 , Circlip Part Noeea0025532 Model 907 , Outer Disk Part Noeea0025534 Model 907 , Inner Disk Part Noeea0025535 Model 907 , Disk Part Noeea0025536 Model 907 , Disk Part Noeea0025537 Model 907 , O-Ring Part Noeea0025538 Model 907 , Disk Part Noeea0025539 Model 907 , Disk Part Noeea0025540 Model 907 , Ring Part Noeea0025541 Model 907 , Axle Bolt Part No917a060000019 Model 907 , Clamp Plate Part No917a020000008 Model 907 , Hex Head Bolt Part No370-0405 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut Part No369-0110 Model 907 , Lock Wire (As Required) Part Nol400 Model 907 , Spring Washer Part Nomdw24sa Model 907 , Spacer Part Noeea0025806 Model 907 , Spacer Part Noeea0032217 Model 907 , Spacer Part Noeea0027058 Model 907 , Spacer Part Noeea0027059 Model 907 , Roll Back Cylinder Part No917b050000093 Model 907 , Tube S/A Part Noeea0027156 Model 907 , Piston Rod S/A Part Noeea0027157 Model 907 , Head End Cover Part Noeea0027158 Model 907 , Piston Part Noeea0027159 Model 907 , Circlip Part Noeea0025685 Model 907 , Sph. Bearing Part Noeea0025686 Model 907 , Grease Nipple With Cap Part Noeea0025669 Model 907 , Grub Screw Part Noeea0025670 Model 907 , Rod Wear Ring(*) Part Noeea0025688 Model 907 , Piston Seal-Glydring(*) Part Noeea0025689 Model 907 , Piston Rod O Ring(*) Part Noeea0025690 Model 907 , Piston Rod Backup Ring(*) Part Noeea0025691 Model 907 , Hec O Ring(*) Part Noeea0025692 Model 907 , Hec Backup Ring(*) Part Noeea0025693 Model 907 , Piston Wear Ring(*) Part Noeea0025694 Model 907 , Rod Seal-Bs Type(*) Part Noeea0025677 Model 907 , Rod Wiper-H860(*) Part Noeea0025695 Model 907 , Stop Tube O Ring(*) Part Noeea0025696 Model 907 , Step Seal (*) Part Noeea0025676 Model 907 , Steel Ball(*) Part Noeea0025679 Model 907 , Counter Balance Valve Part Noeea0027160 Model 907 , Grub Csrew Part Noeea0029180 Model 907 , Seal Kit (*) Marked Items Part Noeea0027161 Model 907 , Lift Cylinder Part No917b050000094 Model 907 , Tube S/A Part Noeea0027162 Model 907 , Piston Rod S/A Part Noeea0027163 Model 907 , Head End Cover Part Noeea0027164 Model 907 , Piston Part Noeea0027165 Model 907 , Circlip Part Noeea0025667 Model 907 , Sph Bearing Part Noeea0025668 Model 907 , Grease Nipple With Cap Part Noeea0025669 Model 907 , Grub Screw Part Noeea0025670 Model 907 , Piston Wear Ring (*) Part Noeea0025672 Model 907 , Piston Seal, Glydring (*) Part Noeea0025673 Model 907 , O-Ring, Piston Rod (*) Part Noeea0022809 Model 907 , Piston Rod Back Up Ring (*) Part Noeea0022810 Model 907 , Hec O Ring(*) Part Noeea0025674 Model 907 , Hec Backup Ring(*) Part Noeea0025675 Model 907 , Step Seal (*) Part Noeea0025676 Model 907 , Rod Seal-Bs Type(*) Part Noeea0025677 Model 907 , Rod Wiper-860(*) Part Noeea0025678 Model 907 , Steel Ball(*) Part Noeea0025679 Model 907 , Counter Balance Valve Part Noeea0027167 Model 907 , Seal Kit (*) Marked Items Part Noeea0027168 Model 907 , Rear Frame Part No907c020000099 Model 907 , Plate, Switch Mtg Part Noeea0002375 Model 907 , Coupling Part Nostdd017/015 Model 907 , Coupling (1Bsp) Part Nostdd017/16 Model 907 , Clamp, Half Part No912b060000098 Model 907 , Hex Head Bolt Part No370-0402 Model 907 , Plate Part Noeea0031318 Model 907 , Hex Nut Part No369-0116 Model 907 , Bracket Part No907a070000082 Model 907 , Plate Part Noeea0033367 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Threaded Boss Part Noeea0033366 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Fuel Level Gauge Part No912b050000314 Model 907 , Plug Part No1027a050000003 Model 907 , Rear Axle Part No917b050000012 Model 907 , Axle Housing Part Noeea0025425 Model 907 , Breather Part Noeea0025426 Model 907 , Screw Plug Part Noeea0025427 Model 907 , Planetary Group Kit Part No907a070000086 Model 907 , Sealing Ring Part Noeea0025428 Model 907 , Screw Plug Part Noeea0025429 Model 907 , Sealing Ring Part Noeea0025430 Model 907 , Axle Shaft Part Noeea0025431 Model 907 , Axle Shaft Part Noeea0025432 Model 907 , Wheel Stud Part Noeea0025434 Model 907 , Hub Reduction Group Kit Part No907a070000087 Model 907 , Ring Part Noeea0025435 Model 907 , Radial Seal Ring Part Noeea0025436 Model 907 , Radial Seal Ring Part Noeea0025437 Model 907 , Tapered Roller Bearing Part Noeea0025438 Model 907 , Tapered Roller Bearing Part Noeea0025439 Model 907 , Ring Part Noeea0025440 Model 907 , Nut Part Noeea0025441 Model 907 , Hexagon Socket Screw Part Noeea0025442 Model 907 , O-Ring Part Noeea0025443 Model 907 , Sealing Ring Part Noeea0025444 Model 907 , Inner Disk Part Noeea0025445 Model 907 , Outer Disk Part Noeea0025446 Model 907 , Piston Part Noeea0025447 Model 907 , Gasket Part Noeea0025448 Model 907 , Gasket Part Noeea0025449 Model 907 , Brake Carrier Part Noeea0025450 Model 907 , Brake Housing Part Noeea0025451 Model 907 , O-Ring Part Noeea0025452 Model 907 , O-Ring Part Noeea0025453 Model 907 , O-Ring Part Noeea0025454 Model 907 , Hexagon Socket Screw Part Noeea0025455 Model 907 , Hexagon Socket Screw Part Noeea0025456 Model 907 , Face Seal Part Noeea0025457 Model 907 , Screw Plug Part Noeea0025458 Model 907 , Sealing Ring Part Noeea0025459 Model 907 , Bleeding Socket Part Noeea0025460 Model 907 , Sealing Ring Part Noeea0025461 Model 907 , Bleeder Valve Part Noeea0025462 Model 907 , Compression Spring Part Noeea0025463 Model 907 , Compression Spring Part Noeea0025464 Model 907 , Intermediate Piece Part Noeea0025465 Model 907 , Piston Guide Ring Part Noeea0025466 Model 907 , Warning Label Part Noeea0025467 Model 907 , O-Ring Part Noeea0025468 Model 907 , Thread Bushing Part Noeea0025469 Model 907 , O-Ring Part Noeea0025472 Model 907 , Cap Part Noeea0025473 Model 907 , Planetary Housing Part Noeea0025474 Model 907 , O-Ring Part Noeea0025475 Model 907 , Screw Plug Part Noeea0025476 Model 907 , Disk Part Noeea0025480 Model 907 , Hexagon Socket Screw Part Noeea0025481 Model 907 , Sun Gear Part Noeea0025482 Model 907 , Bushing Part Noeea0025483 Model 907 , Hexagon Socket Screw Part Noeea0025484 Model 907 , Ring Part Noeea0025485 Model 907 , Planetary Gear Part Noeea0025486 Model 907 , Disk Part Noeea0025487 Model 907 , Ring Part Noeea0025488 Model 907 , Needle Bearing Part Noeea0025489 Model 907 , Planetary Pin Part Noeea0025490 Model 907 , Locking Pin Part Noeea0025491 Model 907 , Ring Gear Part Noeea0025492 Model 907 , Ring Gear Carrier Part Noeea0025493 Model 907 , Retainer Part Noeea0025494 Model 907 , Hexagon Screw Part Noeea0025495 Model 907 , O-Ring Part Noeea0025496 Model 907 , Differential And Carrier Assembly Part Noeea0025470 Model 907 , Drive Pinion Part Noeea0025498 Model 907 , Ring Gear Part Noeea0025499 Model 907 , Differential Housing Part Noeea0025500 Model 907 , Differential Housing Part Noeea0025501 Model 907 , Hexagon Screw Part Noeea0025507 Model 907 , Tapered Roller Bearing Part Noeea0025508 Model 907 , Differential Carrier Part Noeea0025510 Model 907 , Hexagon Screw Part Noeea0025511 Model 907 , Setting Ring Part Noeea0025512 Model 907 , Lock Plate Part Noeea0025513 Model 907 , Hexagon Screw Part Noeea0025515 Model 907 , Hexagon Screw Part Noeea0025516 Model 907 , Bolt Part Noeea0025517 Model 907 , Bolt Part Noeea0025518 Model 907 , Hexagon Nut Part Noeea0025519 Model 907 , Tapered Roller Bearing Part Noeea0025520 Model 907 , Bushing Part Noeea0025521 Model 907 , Tapered Roller Bearing Part Noeea0025522 Model 907 , Bearing Flange Part Noeea0025523 Model 907 , Cover Part Noeea0025524 Model 907 , Radial Seal Ring Part Noeea0025525 Model 907 , Hexagon Screw Part Noeea0025526 Model 907 , Compensation Plate Part Noeea0025527 Model 907 , Drive Flange Part Noeea0025528 Model 907 , Adjusting Nut Part Noeea0025529 Model 907 , Bearing Part Noeea0025530 Model 907 , Circlip Part Noeea0025531 Model 907 , Circlip Part Noeea0025532 Model 907 , Nospin Differential Part Noeea0025533 Model 907 , O-Ring Part Noeea0025538 Model 907 , Disk Part Noeea0025539 Model 907 , Disk Part Noeea0025540 Model 907 , Credle Kit For Axle Part No907a070000084 Model 907 , Plate Part Noeea0025542 Model 907 , Ring Part Noeea0025543 Model 907 , Disk Part Noeea0025544 Model 907 , Disk Part Noeea0025545 Model 907 , Bushing Part Noeea0025546 Model 907 , Bracket Part Noeea0025547 Model 907 , Disk Part Noeea0025548 Model 907 , Plate Part Noeea0025549 Model 907 , Plate Part Noeea0025550 Model 907 , Plate Part Noeea0025551 Model 907 , Hexagon Screw Part Noeea0025552 Model 907 , Hexagon Screw Part Noeea0025553 Model 907 , Hexagon Screw Part Noeea0025554 Model 907 , O-Ring Part Noeea0025555 Model 907 , Grease Nipple Part Noeea0025556 Model 907 , Locking Pin Part Noeea0025557 Model 907 , Sunk Screw Part Noeea0025558 Model 907 , Hex Head Bolt Part No917a060000023 Model 907 , Spring Washer Part Nomdw20sa Model 907 , Dowelpin Part Nomkb30m40 Model 907 , Hex Head Bolt Part No917a060000024 Model 907 , Steering Cylinder Part No917b050000008 Model 907 , Tube S/A Part Noeea0025637 Model 907 , Piston Rod S/A Part Noeea0025638 Model 907 , Head End Cover Part Noeea0022798 Model 907 , Piston Part Noeea0025639 Model 907 , Circlip Part Noeea0022800 Model 907 , Spherical Bearing Part Noeea0022799 Model 907 , Grease Nipple With Cap Part Noeea0020796 Model 907 , Grub Screw Part Noeea0022801 Model 907 , Snap Ring Part Noeea0025634 Model 907 , Piston Wear Ring (*) Part Noeea0022803 Model 907 , Piston Seal (*) Part Noeea0022802 Model 907 , Piston Rod O Ring (*) Part Noeea0022804 Model 907 , Back Up Ring (*) Part Noeea0022805 Model 907 , O-Ring, Piston Rod (*) Part Noeea0022809 Model 907 , Hec B/U Ring(*) Part Noeea0025698 Model 907 , Rod Wear Ring (*) Part Noeea0022808 Model 907 , Rod Seal (*) Part Noeea0022807 Model 907 , Wiper(*) Part Noeea0025635 Model 907 , Seal Kit (*) Marked Items Part Noeea0025645 Model 907 , Spacer Part No907a020000046 Model 907 , Pin Part No917a060000016 Model 907 , Lock Plate Part No822a060000013 Model 907 , Hex Socket Head Cap Screw Part No370-2311 Model 907 , Pin Assy. Part No917a020000002 Model 907 , Pin Part No917a060000018 Model 907 , R. Bar Part Noeea0012035 Model 907 , Pin (F.F.-R.F.) Part No907b060000005 Model 907 , Clamp Half Part No912b060000115 Model 907 , Hex Head Bolt Part No370-0631 Model 907 , Hex Nut Part No369-0116 Model 907 , Spring Washer Part Nomdw16sa Model 907 , Hex Head Bolt Part No370-0236 Model 907 , Spring Washer Part Nomdw08sa Model 907 , Cover Part No811b020000150 Model 907 , Gasket Part No811b050000067 Model 907 , Tank Relief Cartridge Part No613m000001081 Model 907 , Bonded Seal Part Nosc011/013 Model 907 , Steel Ball Part Nogr6 Model 907 , Bonded Seal Part Nosc011/019 Model 907 , Drain Cock, Valve Part Nobp2rve Model 907 , Suction Strainer (40 Mesh) Part No625b050000122 Model 907 , Hex Bushing Part Nobp11bb10 Model 907 , Oil Level Window Part No241a000000284 Model 907 , Bonded Seal Part Nosc011/027 Model 907 , Grease Nipple Part Nobp1fg Model 907 , Lock Plate Part No912a020000551 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Flat Washer Part Nomaw08ga Model 907 , Lock Wire (As Required) Part Nol400 Model 907 , Plate Part Noeea0025704 Model 907 , Spacer Part Noeea0025803 Model 907 , Guard Part Noeea0028536 Model 907 , Hex Head Bolt Part No370-0237 Model 907 , Tank Breather Part No917a050000078 Model 907 , Clamp Plate Part Noeea0026327 Model 907 , Hex Head Bolt Part No370-0409 Model 907 , Hex Nut Part No369-0112 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Flat Washer Part Nomaw12ga Model 907 , Seat- Hyd Suspension Part No907a050000093 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Fuel Level Guard Part No907a020000043 Model 907 , Bush Part Nombh100_120_50 Model 907 , Bush Part Nombh100_120_45 Model 907 , Bush Part Nombh100_120_61 Model 907 , Canopy Assembly Part No907a070000007 Model 907 , Threaded Boss Part No811a060000056 Model 907 , Threaded Boss Part No016a000099060 Model 907 , Eimco Logo Assy. Part No19wl020000262 Model 907 , Logo E (Big) Part No19wl020000263 Model 907 , Logo E Small Part No19wl020000264 Model 907 , Name Plate Part Noeeb0018997 Model 907 , Clamp Part Noeea0007780 Model 907 , Plate Part Noeea0027695 Model 907 , Beacon Mtg. Bkt. Part No910a020000114 Model 907 , Flashing Light Bracket Part Noeea0031660 Model 907 , Hex Head Bolt Part No370-0204 Model 907 , Spring Washer Part Nomdw06sa Model 907 , Hex Head Bolt Part No370-1013B Model 907 , Spring Washer Part Nomdw24sa Model 907 , Hex Head Bolt Part No370-1015 Model 907 , Hex Nut Part No369-0124 Model 907 , Hex Head Bolt Part No370-1009 Model 907 , Diesel Engine Part No907b050000005 Model 907 , Engine Bracket Part No907a020000059 Model 907 , Engine Bracket, Rh Part No907b020000060 Model 907 , Engine Bracket, Lh Part No907b020000061 Model 907 , Avm (Engine) Part No19wl050000865 Model 907 , Avm, Engine Part No910a050000025 Model 907 , Hex Head Bolt Part No370-0612 Model 907 , Hex Head Bolt Part No370-0623 Model 907 , Spacer Part Noeea0027233 Model 907 , Hex Head Bolt Part No370-1026 Model 907 , Hex Nut, Nyloc Part Nomt24ln Model 907 , Spring Washer Part Nomdw16sa Model 907 , Hex Nut Part No369-0124 Model 907 , Flat Washer Part Nomaw24ga Model 907 , Washer, Avm Part No907a020000068 Model 907 , Transmission Part No917b050000002 Model 907 , Pipe Plug Part Noeea0026623 Model 907 , Assembly-Conv Housing & Tube Part Noeea0022609 Model 907 , Sleeve Part Noeea0013072 Model 907 , Tube Slleve Part Noeea0005696 Model 907 , Sleeve Part Noeea0008045 Model 907 , Sleeve Lock Part Noeea0008046 Model 907 , Lock Washer Part Noeea0013073 Model 907 , Tube Clip Screw Part Noeea0005690 Model 907 , O Ring Part Noeea0013079 Model 907 , Spacer Ring Part Noeea0013080 Model 907 , Tube Assy. Part Noeea0013081 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Screw, Cover Part Noeea0010946 Model 907 , Tube Clip Part Noeea0008041 Model 907 , Rev. Tube Assy. Part Noeea0011579 Model 907 , O Ring Part Noeea0013082 Model 907 , Lube Tube Assy. Part Noeea0011578 Model 907 , Tube Assy. Part Noeea0011580 Model 907 , Supply Tube Part Noeea0011583 Model 907 , Sleeve Part Noeea0013072 Model 907 , Tube Slleve Part Noeea0005696 Model 907 , Sleeve Part Noeea0008045 Model 907 , Sleeve Lock Part Noeea0008046 Model 907 , Lock Washer Part Noeea0013073 Model 907 , Tube Clip Screw Part Noeea0005690 Model 907 , Air Breather Part Noeea0005680 Model 907 , Elbow Part Noeea0011641 Model 907 , Breather Bushing Part Noeea0011556 Model 907 , Lock Washer Part Noeea0005685 Model 907 , Screw-Conv Hsg To Trans Case Part Noeea0026624 Model 907 , Lockwasher-Pump Mounting Screw Part Noeea0026625 Model 907 , Screw-Conv Hsg To Trans Case Part Noeea0026626 Model 907 , O Ring Part Noeea0013079 Model 907 , Spacer Ring Part Noeea0013080 Model 907 , Tube Assy. Part Noeea0013081 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Screw, Cover Part Noeea0010946 Model 907 , Tube Clip Part Noeea0008041 Model 907 , Rev. Tube Assy. Part Noeea0011579 Model 907 , O Ring Part Noeea0013082 Model 907 , Lube Tube Assy. Part Noeea0011578 Model 907 , Tube Assy. Part Noeea0011580 Model 907 , Supply Tube Part Noeea0011583 Model 907 , Screw-Conv Hsg To Trans Case Part Noeea0026627 Model 907 , Gasket Part Noeea0008057 Model 907 , Pin Part Noeea0023186 Model 907 , Spacer Part Noeea0023187 Model 907 , Seal Part Noeea0005936 Model 907 , Cover-Converter Housing Front Part Noeea0026655 Model 907 , Screw Part Noeea0011557 Model 907 , Stud Nut Part Noeea0013069 Model 907 , Stud (Not Shown) Part Noeea0019387 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Gasket Part Noeea0005917 Model 907 , Hose Fitting Part Noeea0013102 Model 907 , Hose Fitting Part Noeea0013103 Model 907 , Trans. Case & Tube Assy. Part Noeea0013750 Model 907 , Tube Assy. Part Noeea0013110 Model 907 , Clip Part Noeea0013109 Model 907 , Tube Slleve Part Noeea0005696 Model 907 , Pressure Tube Part Noeea0008060 Model 907 , Rivet Part Noeea0008072 Model 907 , Cap Screw Part Noeea0019350 Model 907 , Washer Part Noeea0013112 Model 907 , Oring, Suction Line Part Noeea0005966 Model 907 , Baffle, Oil Part Noeea0008073 Model 907 , Baffle, Oil Part Noeea0008074 Model 907 , O Ring Part Noeea0011654 Model 907 , Pressure Tube Part Noeea0011587 Model 907 , Tube Part Noeea0011588 Model 907 , Retainer Ring Part Noeea0008035 Model 907 , Oil Distributor Part Noeea0011609 Model 907 , Ball Part Noeea0019351 Model 907 , Tube Assy. Part Noeea0013110 Model 907 , Clip Part Noeea0013109 Model 907 , Tube Slleve Part Noeea0005696 Model 907 , Pressure Tube Part Noeea0008060 Model 907 , Rivet Part Noeea0008072 Model 907 , Cap Screw Part Noeea0019350 Model 907 , Washer Part Noeea0013112 Model 907 , O Ring Part Noeea0026628 Model 907 , Baffle, Oil Part Noeea0008073 Model 907 , Baffle, Oil Part Noeea0008074 Model 907 , O Ring Part Noeea0026629 Model 907 , Pressure Tube Part Noeea0011587 Model 907 , Tube Part Noeea0011588 Model 907 , Retainer Ring Part Noeea0008035 Model 907 , Oil Distributor Part Noeea0011609 Model 907 , Ball Part Noeea0019351 Model 907 , Dowel Pin Part Noeea0008061 Model 907 , O Ring Part Noeea0026630 Model 907 , Magnetic Drain Plug Part Noeea0005708 Model 907 , Plug-Oil Level/Plug-Lockup Port Part Noeea0026631 Model 907 , Screen Assembly Part Noeea0005688 Model 907 , Screen Assy. Gasket Part Noeea0005687 Model 907 , Cover Part Noeea0013751 Model 907 , Gasket Part Noeea0008075 Model 907 , Capscrew Part Noeea0026633 Model 907 , Lockwasher-Pump Mounting Screw Part Noeea0026625 Model 907 , Nut Part Noeea0026634 Model 907 , Stud Part Noeea0011561 Model 907 , Pipe Plug Part Noeea0005683 Model 907 , Capscrew Part Noeea0026635 Model 907 , Lockwasher Part Noeea0026636 Model 907 , Assy-Stator Support Sleeve Part Noeea0011616 Model 907 , Turbine Shaft Part Noeea0013121 Model 907 , Piston Ring Part Noeea0008293 Model 907 , Bearing Part Noeea0019389 Model 907 , Snap Ring Part Noeea0008050 Model 907 , Piston Ring Part Noeea0008278 Model 907 , Oil Baffle Part Noeea0011573 Model 907 , Seal Ring Part Noeea0011586 Model 907 , Ring, Oil Baffle Retaining Part Noeea0010858 Model 907 , Turbine Hub Part Noeea0013122 Model 907 , Snap Ring Part Noeea0008268 Model 907 , Reaction Member Part Noeea0013123 Model 907 , Spacer Part Noeea0011571 Model 907 , Snap Ring Part Noeea0013124 Model 907 , Bearing Part Noeea0013125 Model 907 , Impeller Hub Part Noeea0013126 Model 907 , O Ring Part Noeea0013127 Model 907 , Impeller Part Noeea0026638 Model 907 , Backing Ring Part Noeea0013129 Model 907 , Screw Part Noeea0013130 Model 907 , Turbine Part Noeea0011622 Model 907 , Screw Part Noeea0008272 Model 907 , Cap Screw Part Noeea0019390 Model 907 , Oring Part Noeea0005753 Model 907 , Impeller Cover Part Noeea0013132 Model 907 , Capscrew Part Noeea0026639 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Bearing Part Noeea0013133 Model 907 , Bearing Washer Part Noeea0013134 Model 907 , Snap Ring Part Noeea0013135 Model 907 , O Ring Part Noeea0013136 Model 907 , Input Shaft Part Noeea0013137 Model 907 , Capscrew Part Noeea0026640 Model 907 , Shaft Bearing Part Noeea0011568 Model 907 , Lock Washer Part Noeea0005685 Model 907 , Screw Part Noeea0011642 Model 907 , Gear Part Noeea0013139 Model 907 , Bearing Support Part Noeea0011574 Model 907 , Bearing Ball Part Noeea0019391 Model 907 , Ring - Snap Part Noeea0019392 Model 907 , Ring-Span Part Noeea0008296 Model 907 , Gear-Imppeller Hub - 46T Part Noeea0013084 Model 907 , Gear- Pump Drive Idler 47T Part Noeea0019393 Model 907 , Support- Pump Drive Idler Part Noeea0019394 Model 907 , Bearing- Ball 6309 Part Noeea0019395 Model 907 , Snap-Ring-Internal Part Noeea0019376 Model 907 , Gear Clutch Driven 25T Part Noeea0026653 Model 907 , Gear-High Range 52T Part Noeea0011585 Model 907 , Gear-Drive Low 4Th. 26T Part Noeea0013737 Model 907 , Gear-2Nd 30T Part Noeea0011621 Model 907 , Reverse 2Nd Shaft Piston Ring Part Noeea0005807 Model 907 , Front Bearing Retaing Ring Part Noeea0005808 Model 907 , Washer Part Noeea0013140 Model 907 , End Plate Balend Plate Ball Part Noeea0013141 Model 907 , Front Bearing Part Noeea0013142 Model 907 , Bearing Part Noeea0023197 Model 907 , Retaninng Ring Part Noeea0023198 Model 907 , Baffle Ring Part Noeea0008085 Model 907 , Retainer Ring Part Noeea0008086 Model 907 , End Plate Part Noeea0013143 Model 907 , Clutch Outer Disc Part Noeea0008088 Model 907 , Inner Disc Part Noeea0013144 Model 907 , Assy. Clutch Piston & Seals Part Noeea0019377 Model 907 , Outer Seal Part Noeea0008091 Model 907 , Inner Seal Part Noeea0008092 Model 907 , Seal-Clutch Piston Metering Part Noeea0019354 Model 907 , Assy-Rev & 3Rd Shaft Part Noeea0023199 Model 907 , Seal-Clutch Piston -Outer Part Noeea0022170 Model 907 , Assy-Clutch Piston & Seals Part Noeea0022169 Model 907 , End Plate Part Noeea0013149 Model 907 , Retainer Spring Part Noeea0022171 Model 907 , Washer Assy. Part Noeea0013150 Model 907 , Snap Ring Retainer Part Noeea0008098 Model 907 , Spring Retainer Snap Ring Part Noeea0005820 Model 907 , Low Speed Gear Bearing Part Noeea0005826 Model 907 , Spring Retainer Part Noeea0008101 Model 907 , Return Spring Part Noeea0008102 Model 907 , Spring Retainer Part Noeea0008103 Model 907 , Bearing Part Noeea0008104 Model 907 , Snap Ring Part Noeea0008105 Model 907 , Spacer Part Noeea0008106 Model 907 , Shield Out Part Noeea0008107 Model 907 , Rear Bearing Part Noeea0013151 Model 907 , Retainer Ring Part Noeea0008109 Model 907 , Reverse 2Nd Shaft Piston Ring Part Noeea0005807 Model 907 , Front Bearing Retaing Ring Part Noeea0005808 Model 907 , Washer Part Noeea0013140 Model 907 , End Plate Balend Plate Ball Part Noeea0013141 Model 907 , Front Bearing Part Noeea0013142 Model 907 , Front Bearing Snap Ring Part Noeea0005809 Model 907 , Bearing Part Noeea0023197 Model 907 , Retaninng Ring Part Noeea0023198 Model 907 , Baffle Ring Part Noeea0008085 Model 907 , Low Speed Gear Bearing Part Noeea0005826 Model 907 , Spring Retainer Snap Ring Part Noeea0005820 Model 907 , Snap Ring Retainer Part Noeea0008098 Model 907 , Washer Assy. Part Noeea0013150 Model 907 , Retainer Spring Part Noeea0022171 Model 907 , Ring Retainer Part Noeea0013162 Model 907 , Sanp Ring Part Noeea0013163 Model 907 , Spring Retainer Part Noeea0008103 Model 907 , Return Spring Part Noeea0008102 Model 907 , Spring Retainer Part Noeea0008101 Model 907 , Retainer Ring Part Noeea0008086 Model 907 , End Plate Part Noeea0013143 Model 907 , Clutch Outer Disc Part Noeea0008088 Model 907 , Inner Disc Part Noeea0013144 Model 907 , Assy. Clutch Piston & Seals Part Noeea0019377 Model 907 , Outer Seal Part Noeea0008091 Model 907 , Inner Seal Part Noeea0008092 Model 907 , Seal-Clutch Piston Metering Part Noeea0019354 Model 907 , Assy.-Fwd & 2Nd Shaft, Hub, Drum & Plug Part Noeea0023243 Model 907 , Seal-Clutch Piston -Outer Part Noeea0022170 Model 907 , Assy-Clutch Piston & Seals Part Noeea0022169 Model 907 , End Plate Part Noeea0013149 Model 907 , Gear-Clutch Driven 27T Part Noeea0023193 Model 907 , Gear-2Nd 30T Part Noeea0011621 Model 907 , Assy-Low Shaft,Hub,Drum & Plug Part Noeea0019357 Model 907 , Assy-Low Hub & Drum Part Noeea0019358 Model 907 , O Ring Part Noeea0013178 Model 907 , Retaining Ring Part Noeea0013175 Model 907 , Shaft Part Noeea0013753 Model 907 , Plug Part Noeea0013179 Model 907 , Assy-Low Hub & Drum Part Noeea0019358 Model 907 , O Ring Part Noeea0013178 Model 907 , Retaining Ring Part Noeea0013175 Model 907 , Shaft Part Noeea0013753 Model 907 , Plug Part Noeea0013179 Model 907 , Seal-Clutch Piston Metering Part Noeea0019354 Model 907 , Assy-Clutch Piston & Seals Part Noeea0019359 Model 907 , Inner Seal Part Noeea0008092 Model 907 , Seal-Clutch Piston -Outer Part Noeea0022170 Model 907 , Clutch Inner Disc Part Noeea0008115 Model 907 , Clutch Outer Disc Part Noeea0008088 Model 907 , End Plate Part Noeea0008087 Model 907 , Retainer Ring Part Noeea0008086 Model 907 , Spring Part Noeea0013167 Model 907 , Retainer Spring Part Noeea0013168 Model 907 , Bearing Spacer Part Noeea0013170 Model 907 , Spring Retainer Part Noeea0008124 Model 907 , Snap Ring Part Noeea0008050 Model 907 , Ring Retainer Part Noeea0013169 Model 907 , Gear(54T) Part Noeea0013752 Model 907 , Bearing Assy. Part Noeea0013171 Model 907 , Piston Ring Part Noeea0008227 Model 907 , Pilot Bearing Part Noeea0008130 Model 907 , Bearing Cup Part Noeea0008156 Model 907 , Bearing Cone Part Noeea0013191 Model 907 , Cap Part Noeea0013756 Model 907 , Capscrew Part Noeea0026639 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Pipe Plug Part Noeea0005683 Model 907 , O Ring Part Noeea0026644 Model 907 , O Ring Part Noeea0026645 Model 907 , Bearing Cup Part Noeea0014098 Model 907 , Bearing Cone Part Noeea0013173 Model 907 , Seal-Clutch Piston Metering Part Noeea0019354 Model 907 , Inner Seal Part Noeea0008092 Model 907 , Snap Ring Part Noeea0013135 Model 907 , Assy-4Th Hub & Drum Part Noeea0019360 Model 907 , Assy-Idler Shaft,Gear And Plugs Part Noeea0019361 Model 907 , Shaft And Bearing Assy. Part Noeea0013189 Model 907 , Bearing Lock Ball Part Noeea0008138 Model 907 , Locating Ring Part Noeea0008139 Model 907 , Washer Part Noeea0013764 Model 907 , Disc Hub Nut Part Noeea0013224 Model 907 , Gasket Part Noeea0008141 Model 907 , Cap Part Noeea0013765 Model 907 , Ber.Cap Stud Lock Washer Part Noeea0005861 Model 907 , Screw Part Noeea0013766 Model 907 , Outer Seal Part Noeea0008091 Model 907 , Assy-Clutch Piston & Seals Part Noeea0019359 Model 907 , Clutch Outer Disc Part Noeea0008088 Model 907 , Inner Disc Part Noeea0013144 Model 907 , End Plate Part Noeea0008087 Model 907 , Retainer Ring Part Noeea0008086 Model 907 , Spring Retainer Part Noeea0008101 Model 907 , Return Spring Part Noeea0008102 Model 907 , Spring Retainer Part Noeea0008103 Model 907 , Snap Ring Part Noeea0011575 Model 907 , Impeller Hub Gear Bearing Part Noeea0005738 Model 907 , Gear-4Th Clutch & Hub 23T Part Noeea0019363 Model 907 , Spacer Part Noeea0011595 Model 907 , Bearing Part Noeea0011566 Model 907 , Piston Ring Part Noeea0008224 Model 907 , Oil Seal Part Noeea0013190 Model 907 , Bearing Cap Part Noeea0008145 Model 907 , O Ring Part Noeea0026648 Model 907 , Bearing Cup Part Noeea0011629 Model 907 , Bearing Cone Part Noeea0013191 Model 907 , Gear Spacer Part Noeea0013192 Model 907 , Output Shaft Part Noeea0013193 Model 907 , Bearing Cup Part Noeea0008156 Model 907 , O Ring Part Noeea0026649 Model 907 , O Ring Part Noeea0026650 Model 907 , Ber.Cap Stud Lock Washer Part Noeea0005861 Model 907 , Capscrew Part Noeea0026651 Model 907 , Capscrew Part Noeea0026652 Model 907 , Gasket Part Noeea0011617 Model 907 , O Ring Part Noeea0013311 Model 907 , O Ring Part Noeea0005695 Model 907 , O Rong Part Noeea0013214 Model 907 , Stud Part Noeea0011577 Model 907 , Gasket Part Noeea0011637 Model 907 , Lock Washer Part Noeea0005685 Model 907 , Bearing Cap Stud Nut Part Noeea0005836 Model 907 , Pressure Regulator Part Noeea0013213 Model 907 , Plug-Oil Level/Plug-Lockup Port Part Noeea0026631 Model 907 , Valve Seat Part Noeea0011600 Model 907 , Spacer Part Noeea0011601 Model 907 , Safety Valve Plunger Part Noeea0013198 Model 907 , Valve Spring Part Noeea0008250 Model 907 , O Ring Part Noeea0026656 Model 907 , Valve Stop Part Noeea0011569 Model 907 , Roll Pin Part Noeea0011652 Model 907 , Valve Stop Part Noeea0008243 Model 907 , O Ring Part Noeea0026657 Model 907 , Valve Piston Part Noeea0011638 Model 907 , Valve Spring , Inner Part Noeea0008247 Model 907 , Valve Spring Outer Part Noeea0011613 Model 907 , Oil Seal Part Noeea0013212 Model 907 , Roll Pin Part Noeea0011602 Model 907 , Charging Pump & Cover Part Noeea0026646 Model 907 , Assyembly Charging Pump 20 Gpm Part Noeea0022635 Model 907 , Lockwasher Part Noeea0026658 Model 907 , Capscrew Part Noeea0026659 Model 907 , Gasket Part Noeea0013215 Model 907 , Pump Cover Part Noeea0013216 Model 907 , Gasket Part Noeea0013780 Model 907 , Capscrew Part Noeea0026683 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Assembly-Control Valve Cover Part Noeea0026661 Model 907 , Plug Part Noeea0021168 Model 907 , Gasket Part Noeea0013780 Model 907 , Plug-Filler Part Noeea0021190 Model 907 , Spool Part Noeea0013781 Model 907 , Pin Part Noeea0013782 Model 907 , Accumulator Spring Inner Part Noeea0005908 Model 907 , Spring Part Noeea0013783 Model 907 , Spring Part Noeea0026662 Model 907 , Fitting Plug Part Noeea0026663 Model 907 , Spool Part Noeea0026664 Model 907 , Spring Part Noeea0026665 Model 907 , Pin Part Noeea0026666 Model 907 , Shuttle Valve-Bottom Part Noeea0013786 Model 907 , Ctrl Valve & Hsg. Assy. Part Noeea0013770 Model 907 , O Ring Part Noeea0026667 Model 907 , O Ring Part Noeea0026668 Model 907 , O Ring Part Noeea0026669 Model 907 , O Ring Part Noeea0026670 Model 907 , O Ring Part Noeea0026671 Model 907 , Assy-Spool Type Solenoid Cartrigde Part Noeea0026672 Model 907 , Fitting-Plug, O Ring Seal Part Noeea0026703 Model 907 , O Ring Part Noeea0026673 Model 907 , Spring Part Noeea0013768 Model 907 , Spool-Regulator Part Noeea0026674 Model 907 , Plug Part Noeea0013179 Model 907 , Cover-Solenoid Part Noeea0026676 Model 907 , Cover-Solenoid Part Noeea0026677 Model 907 , Capscrew Part Noeea0026678 Model 907 , Lock Washer Part Noeea0013073 Model 907 , Retainer-Wire Part Noeea0026679 Model 907 , Retainer Part Noeea0026680 Model 907 , Spacer-Wire Retainer Part Noeea0026681 Model 907 , Gasket Part Noeea0013767 Model 907 , Capscrew Part Noeea0026683 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Flange Part Noeea0011972 Model 907 , O Ring, Flange Part Noeea0010959 Model 907 , Washer Part Noeea0011872 Model 907 , Nut Part Noeea0008317 Model 907 , Flange Part Noeea0013732 Model 907 , O Ring Part Noeea0013065 Model 907 , Washer Part Noeea0013064 Model 907 , Nut Part Noeea0008140 Model 907 , Pump Adaptor Part Noeea0026684 Model 907 , Gasket Part No4697203 Model 907 , Lockwasher Part Noeea0026636 Model 907 , Capscrew Part Noeea0026686 Model 907 , Pump Drive Sleeve & Snap Ring Part Noeea0019402 Model 907 , Pump Drive Hole Cover Part Noeea0019386 Model 907 , Snap Ring Part Noeea0013814 Model 907 , Snap Ring Part Noeea0008309 Model 907 , Gasket Part Noeea0011597 Model 907 , Adaptor-Pump Part Noeea0026688 Model 907 , Lock Washer Part Noeea0005685 Model 907 , Capscrew Part Noeea0026689 Model 907 , Lock Washer Part Noeea0005729 Model 907 , Capscrew Part Noeea0026690 Model 907 , Pump Drive Sleeve And Snap Ring Assembly Part Noeea0026691 Model 907 , Sleeve Pump Drive Part Noeea0026692 Model 907 , Snap Ring Part Noeea0008309 Model 907 , Kit-Connector, Wire & Seal Part Noeea0026654 Model 907 , Taps - Oil Fill Part Noeea0013091 Model 907 , Cab Control Part Noeea0025805 Model 907 , Duel Element Filter Assy. Part Noeea0026879 Model 907 , Filter Head Assy. Part Noeea0026880 Model 907 , Electrical Indicator Assy. Part Noeea0026881 Model 907 , Indicator Seal & Connector Nut Kit Part Noeea0026882 Model 907 , Filter Element Assy. Part Noeea0026790 Model 907 , Bracket Part No917a020000043 Model 907 , Bracket Part No917a020000044 Model 907 , Bracket Part No917a020000045 Model 907 , Bracket Part No917a020000046 Model 907 , Hex Head Bolt Part No917a060000022 Model 907 , Spring Washer Part Now12gf Model 907 , Dip Stick Part No912a050000080 Model 907 , Lock Wire (As Required) Part Nol400 Model 907 , Reducer(Bsp-Npt),M/M Part Nosc089/046 Model 907 , Elbow, 90 Degree M/F Part Nose012/026 Model 907 , Hose Assembly Part No623d02584/148 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Elbow, Street 90 Degree M/F Part Nobp6blb Model 907 , Pipe Part Noeea0026870 Model 907 , Pillow Block Bearing Part No917a050000016 Model 907 , Drive Line(Front) Part No912b050000206 Model 907 , Spider Assy. (7C) Part No912a050000208 Model 907 , Drive Line(Articulation) Part No912b050000218 Model 907 , Spider Assy. (7C) Part No912a050000208 Model 907 , Drive Line(Tr. To Rear Axle) Part No917b050000020 Model 907 , Hex Head Bolt Part Not8hg40 Model 907 , Spring Washer Part Now8gfb Model 907 , Hex Head Bolt Part No370-0612 Model 907 , Hex Nut Part No369-0116 Model 907 , Spring Washer Part Nomdw16sa Model 907 , Flat Washer Part Nomaw16ga Model 907 , Hex Head Bolt Part No370-0815 Model 907 , Hex Nut Part No369-0120 Model 907 , Spring Washer Part Nomdw20sa Model 907 , Hex Head Bolt Part Not6hg32 Model 907 , Spring Washer Part Now6gf Model 907 , Upbox Part No917b050000090 Model 907 , Radial Seal Ring Part Noeea0027541 Model 907 , Drive Flange Part Noeea0027542 Model 907 , Hexagon Screw Part Noeea0027543 Model 907 , Disk Part Noeea0027544 Model 907 , Disk Part Noeea0027545 Model 907 , Housing Part Noeea0027546 Model 907 , Screw Plug Part Noeea0027547 Model 907 , Sealing Ring Part Noeea0027548 Model 907 , Screw Plug Part Noeea0027549 Model 907 , Breather Part Noeea0027550 Model 907 , Plate Part Noeea0027551 Model 907 , Hexagon Socket Screw Part Noeea0027552 Model 907 , Sleeve Part Noeea0027553 Model 907 , Hexagon Screw Part Noeea0027554 Model 907 , Radial Seal Ring Part Noeea0027555 Model 907 , Angle Piece Part Noeea0027556 Model 907 , Cover Part Noeea0027557 Model 907 , Gear Wheel Part Noeea0027558 Model 907 , Pinion Part Noeea0027559 Model 907 , Shaft Part Noeea0027560 Model 907 , Hexagon Socket Screw Part Noeea0027561 Model 907 , Bearing Part Noeea0027562 Model 907 , Bearing Part Noeea0027563 Model 907 , Cover Part Noeea0027564 Model 907 , Hexagon Screw Part Noeea0027565 Model 907 , Pinion Part Noeea0027566 Model 907 , Grooved Ball Bearing Part Noeea0027567 Model 907 , Grooved Ball Bearing Part Noeea0027568 Model 907 , Flange Part Noeea0027569 Model 907 , Hexagon Screw Part Noeea0027570 Model 907 , Cover Part Noeea0027571 Model 907 , Hexagon Screw Part Noeea0027572 Model 907 , Driver Part Noeea0027573 Model 907 , Pipe Part Noeea0027574 Model 907 , Sealing Ring Part Noeea0027575 Model 907 , O-Ring Part Noeea0027576 Model 907 , O-Ring Part Noeea0027577 Model 907 , Coupling Part No917b050000118 Model 907 , Adaptor Plate Part Noeea0026883 Model 907 , Stud Part No907a020000017 Model 907 , Hex Nut Part No369-0110 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Drive Line Part No917b050000092 Model 907 , Spider Assy. - 6C Part No907a050000050 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Spacer Part No912a060000178 Model 907 , Wheel Assy. Part No907b070000067 Model 907 , Wheel Rim Part No917b050000009 Model 907 , Sleek Tyre 17.5 X R25 Part No907a050000091 Model 907 , Valve, Wheel Rim Part No907a050000075 Model 907 , Steering Hydraulic Group Part No907b070000029 Model 907 , Feeder Unit Block Part No19wl050000019 Model 907 , Accumulator Part No12wl050000999 Model 907 , Relief Valve Assy. Part No625b050000064 Model 907 , Relief Cartridge Part Noeea0008997 Model 907 , Seal Kit-Relief Valve,(*)Marked Items Part Noeea0009001 Model 907 , Accumulator (4-Ltr) Part No811a050000191 Model 907 , Seal Kit For (*) Marked Items Part Noeea0019109 Model 907 , Sealing Ring Part Noeea0022384 Model 907 , O-Ring Part Noeea0022385 Model 907 , Pilot Valve Part No910b050000055 Model 907 , 2 Way Poppet Valve(Nc) Part No907a050000001 Model 907 , Gasket Part No912a050000229 Model 907 , Accumulator Charge Valve Part No912b050000309 Model 907 , Repair Kit Part Noeea0018821 Model 907 , Suction Flange Part No917a020000061 Model 907 , Suction Flange Part No917a020000062 Model 907 , Feeder Block Mounting Bracket Part No917a020000068 Model 907 , Check Valve Part No907a050000004 Model 907 , Steering Contrl Valve Part No917b050000115 Model 907 , Hydraulic Pump(Steering And Brake) Part No917b050000017 Model 907 , M14 Screw Part Noeea0026292 Model 907 , M14 Nut Part Noeea0026293 Model 907 , Oil Seal Part Noeea0011535 Model 907 , Thr. Plate Part Noeea0026294 Model 907 , Seal. Chann Part Noeea0026295 Model 907 , Seal. Bk-Up Part Noeea0026296 Model 907 , Seal Sect. Part Noeea0026297 Model 907 , Plug Part Noeea0022648 Model 907 , Seal Kit Part Noeea0026838 Model 907 , Split Flange Half (Code 61) Part Nod10a010000032 Model 907 , Special Fitting Part No907a050000067 Model 907 , Manifold Part No907b020000051 Model 907 , Bracket, Acc. Charge Vlv Part No912a020000652 Model 907 , Pipe Bend (90 Degree) Part No917a050000058 Model 907 , Clamp Part Noeea0019155 Model 907 , Hose Clip Part Nop105phb Model 907 , O Ring Part Nos2712 Model 907 , O Ring Part Nos2803 Model 907 , O Ring 32.92X3.53-N-Nbr90 Part No341-5030 Model 907 , Hose Assy. Part No907a050000065 Model 907 , Hose Assy. Part No907a050000066 Model 907 , Hyd.Hose Part Nostdb025/004 Model 907 , Hyd.Hose Part No625a050000113 Model 907 , Hose Assy. Part Nostdd026/039 Model 907 , Hose Assy. Part Nostdd026/084 Model 907 , Hose Assy. Part Nostdd026/112 Model 907 , Hose Assy. Part Nostdd026/301 Model 907 , Hose Assy. Part Nostdd026/309 Model 907 , Hose Assy. Part Nostdd026/310 Model 907 , Hose Assy. Part Nostdd026/317 Model 907 , Hose Assy. Part Nostdd026/321 Model 907 , Hose Assy. Part Nostdd026/323 Model 907 , Hose Assy. Part Nostdd026/327 Model 907 , Hose Assy. Part Nostdd026/334 Model 907 , Hose Assy. Part Nostdd033/033 Model 907 , Hose Assy. Part Nostdd033/037 Model 907 , Hose Assy. Part Nostdd033/094 Model 907 , Hex Bushing Part Nobp8bb7 Model 907 , Bonded Seal Part Nosc011/009 Model 907 , Bonded Seal Part Nosc011/013 Model 907 , Bonded Seal Part Nosc011/016 Model 907 , Bonded Seal Part Nosc011/019 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Bonded Seal Part Nosc011/027 Model 907 , Straight Adaptor Part Nose024/201 Model 907 , Straight Adaptor Part Nose024/202 Model 907 , Straight Adaptor Part Nose024/203 Model 907 , Straight Adaptor Part Nose024/208 Model 907 , Straight Adaptor Part Nose024/209 Model 907 , Straight Adaptor Part Nose024/211 Model 907 , Straight Adaptor Part Nose024/212 Model 907 , Straight Adaptor Part Nose024/217 Model 907 , Straight Adaptor Part Nose024/218 Model 907 , Straight Adaptor Part Nose024/219 Model 907 , Straight Adaptor Part Nose024/429 Model 907 , Straight Adaptor Part Nose024/430 Model 907 , Swivel Adaptor (F/F) Part Nose024/431 Model 907 , Adaptor Part Nose024/454 Model 907 , Tee Part Novu10f10e01ds Model 907 , Swivel Nut Elbow Part Novu10f10e21bs Model 907 , Elbow 45 Deg Part Novu10f10e21cs Model 907 , Reducer Part Novu10f16e16as Model 907 , St. Adaptor Part Novu10f8e16as Model 907 , St. Adaptor Part Novu12f12e16as Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Adaptor Part Novu12f12e33ds Model 907 , Adaptor Part Novu12f16e16as Model 907 , Elbow 90 Degree Part Novu16f16e20bs Model 907 , Swivel Nut Elbow Part Novu16f16e21bs Model 907 , Straight Adaptor Part Novu6f6e16as Model 907 , Swivel Nut Elbow Part Novu6f6e21bs Model 907 , Swivel, Tee Part Novu6f6e25ds Model 907 , Swivel Nut Branch Tee Part Novu6f6e33ds Model 907 , Elbow 90 Degree Part Novu6f8e20bs Model 907 , Elbow 90 Degree Part Novu8f8e21bs Model 907 , Hex Nut Part No369-0106 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Nut Part No369-0112 Model 907 , Hex Head Bolt Part No370-0206 Model 907 , Hex Head Bolt Part No370-0237 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0312 Model 907 , Hex Head Bolt Part No370-0402 Model 907 , Hex Head Bolt Part No370-0403 Model 907 , Hex Socket Head Cap Screw Part No370-2411 Model 907 , Threaded Boss (M12x15lg) Part Noeea0016795 Model 907 , Flat Washer Part Nomaw06ga Model 907 , Flat Washer Part Nomaw08ga Model 907 , Flat Washer Part Nomaw10ga Model 907 , Flat Washer Part Nomaw12ga Model 907 , Spring Washer Part Nomdw06sa Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Hex Head Bolt Part Not6gg12 Model 907 , Hex Head Bolt Part Not8gg28 Model 907 , Spring Washer Part Now8gf Model 907 , Pressure Filter Part No811a050000182 Model 907 , Filter Element Part Noeea0018438 Model 907 , Filter Mounting Bracket Part No917a020000087 Model 907 , Hex Head Bolt Part No370-0420 Model 907 , Bracket, Pilot Valve Part No910a020000187 Model 907 , Bracket Part Noeea0025607 Model 907 , Plate Part Noeea0025606 Model 907 , Hex Nut Part Nomt28mgg Model 907 , Hose Assy. Part Nostdd033/114 Model 907 , Boss Part Noeea0001567 Model 907 , Service Hydraulic Group Part No907b070000030 Model 907 , Manifold Block Part No910a050000019 Model 907 , Check Valve Part Noeea0030269 Model 907 , Seal Kit, Check Valve Part Noeea0030272 Model 907 , Direction Valve Part Noeea0030270 Model 907 , Seal Kit, Direction Valve Part Noeea0030273 Model 907 , Solenoid Valve Part Noeea0030271 Model 907 , Seal Kit, Solenoid Valve Part Noeea0030274 Model 907 , 3/2 Way Valve Part No19wl050000655 Model 907 , Check Valve Part No625a050000111 Model 907 , Gasket Part No912a050000229 Model 907 , Hydraulic Hand Pump Part No611b050000326 Model 907 , Hydraulic Pump(Steering And Brake) Part No917b050000017 Model 907 , M14 Screw Part Noeea0026292 Model 907 , M14 Nut Part Noeea0026293 Model 907 , Oil Seal Part Noeea0011535 Model 907 , Thr. Plate Part Noeea0026294 Model 907 , Seal. Chann Part Noeea0026295 Model 907 , Seal. Bk-Up Part Noeea0026296 Model 907 , Seal Sect. Part Noeea0026297 Model 907 , Plug Part Noeea0022648 Model 907 , Seal Kit Part Noeea0026838 Model 907 , Relief Valve Assy. Part No625b050000064 Model 907 , Relief Cartridge Part Noeea0008997 Model 907 , Seal Kit-Relief Valve,(*)Marked Items Part Noeea0009001 Model 907 , Return Filter Part No611a050000018 Model 907 , Filter Element Part Noeea0003479 Model 907 , Container Part Noeea0000029 Model 907 , O Ring (*) Part Noeea0000031 Model 907 , O Ring (*) Part Noeea0000032 Model 907 , O Ring (*) Part Noeea0000033 Model 907 , Hex Socket Head Cap Screw Part No370-2409 Model 907 , Sealkit,(*)Marked Items Part Noeea0001034 Model 907 , Service Control Vale Part No907b050000089 Model 907 , T-Bolt Clamp Part No12wl050000817 Model 907 , Suction Flange Part No917a020000064 Model 907 , Suction Flange Part No917a020000063 Model 907 , Stand Pipe Part No803a000000337 Model 907 , Split Flange Half (Code 61) Part Nod10a010000032 Model 907 , Quick Release Coupling Part No625a050000011 Model 907 , Bspp Socket Part No625a050000106 Model 907 , Bspp Plug Part No625a050000107 Model 907 , Plug For Qrc Part No625a060000008 Model 907 , Pipe Bend (90 Degree) Part No917a050000058 Model 907 , Manifold Part No907b020000051 Model 907 , Hose Clip Part Nop105phb Model 907 , Flanged Pipe Part Noeea0025628 Model 907 , Elbow Part Nod06a050000150 Model 907 , O Ring 32.92X3.53-N-Nbr90 Part No341-5030 Model 907 , O Ring Part Nos2816 Model 907 , O Ring Part Nos2803 Model 907 , Hose Assy. Part No917a050000068 Model 907 , Hose Assy. Part Nostdd026/039 Model 907 , Hose Assy. Part Nostdd026/289 Model 907 , Hose Assy. Part Nostdd026/295 Model 907 , Hose Assy. Part Nostdd026/301 Model 907 , Hose Assy. Part Nostdd026/310 Model 907 , Hose Assy. Part Nostdd026/315 Model 907 , Hose Assy. Part Nostdd026/380 Model 907 , Hose Assy. Part Nostdd032/030 Model 907 , Hose Assy. Part Nostdd032/042 Model 907 , Hose Assy. Part Nostdd032/047 Model 907 , Hose Assy. Part Nostdd033/014 Model 907 , Hose Assy. Part Nostdd033/106 Model 907 , Hyd. Hose Part Nostdb025/013 Model 907 , Hyd.Hose (51 Mm) Part No625a050000113 Model 907 , Hyd. Hose Part Nostdb025/014 Model 907 , Hyd.Hose (51 Mm) Part No625a050000113 Model 907 , Hyd.Hose Part Nostdb025/004 Model 907 , Hyd.Hose (51 Mm) Part No625a050000113 Model 907 , Hydraulic Hose Part No19wl050000562 Model 907 , Adaptor Part Nod06a050000132 Model 907 , Adaptor Part Novu12f12e33ds Model 907 , Adaptor Part Novu12f16e16as Model 907 , Adaptor Part Novu16f16e16asb Model 907 , Adaptor Part Novu8f8e21cs Model 907 , Adaptor (Unf To Jic) Part Novu20f20e20asa Model 907 , Elbow 45 Deg. Part Novu12f12e21cs Model 907 , Elbow 90 Degree Part Novu8f8e21bs Model 907 , Elbow, 90 Degree M/F Part Nose012/022B Model 907 , Elbow, 90 Degree M/F Part Nose012/026 Model 907 , Elbow,Std.90 Degree F/F Part Nobp8bl Model 907 , Gauge Adaptor Part Noeea0003750 Model 907 , Reducer, M/M Part Nose012/096 Model 907 , Reducer, M/M Part Nose012/097 Model 907 , Special Elbow Part Noeea0028571 Model 907 , Special Elbow Part Noeea0017326 Model 907 , St. Adaptor Part Nose024/081 Model 907 , St.Swivel Adaptor M/F Part Nose012/062 Model 907 , Straight Adaptor Part Nose024/201 Model 907 , Straight Adaptor Part Nose024/202 Model 907 , Straight Adaptor Part Nose024/203 Model 907 , Straight Adaptor Part Nose024/206 Model 907 , Straight Adaptor Part Nose024/208 Model 907 , Straight Adaptor Part Nose024/209 Model 907 , Straight Adaptor Part Nose024/211 Model 907 , Straight Adaptor Part Nose024/217 Model 907 , Straight Adaptor Part Nose024/427 Model 907 , Straight Adaptor Part Novu6f6e16as Model 907 , Straight Adaptor M/M Part Nose024/207 Model 907 , Straight Adaptor, M/M Part Nose012/085 Model 907 , Swivel Adaptor (F/F) Part Nose024/431 Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Swivel Nut Branch Tee Part Novu6f6e33ds Model 907 , Swivel Nut Elbow Part Novu16f16e21bs Model 907 , Swivel Nut Elbow Part Novu6f6e21bs Model 907 , Swivel, Tee Part Novu6f6e25ds Model 907 , Bonded Seal Part Nosc011/009 Model 907 , Bonded Seal Part Nosc011/016 Model 907 , Bonded Seal Part Nosc011/019 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Bonded Seal Part Nosc011/027 Model 907 , Flat Washer Part Nomaw12ga Model 907 , Hex Bushing Part Nobp9bb8 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Hex Head Bolt Part No370-0312 Model 907 , Hex Head Bolt Part No370-0402 Model 907 , Hex Head Bolt Part No370-0405 Model 907 , Hex Head Bolt Part No370-0420 Model 907 , Hex Head Bolt Part No370-0607 Model 907 , Hex Head Bolt Part Not8gg28 Model 907 , Hex Head Plug (Bsp) Part Nosc036/002 Model 907 , Hex Head Plug (Bsp) Part Nosc036/004 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Socket Head Cap Screw Part No370-2411 Model 907 , Hex. Head Plug (1-5/8Unf-2A) Part Nosc036/056 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Spring Washer Part Nomdw16sa Model 907 , Spring Washer Part Now8gf Model 907 , Hose Sleeve Part No611a050000139 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Manifold Block Part No910b050000054 Model 907 , Pressure Filter Part No811a050000182 Model 907 , Filter Element Part Noeea0018438 Model 907 , Filter Mounting Bracket Part No917a020000087 Model 907 , Hose Assy. Part Nostdd033/114 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Boss Part Noeea0001567 Model 907 , Hose Assy. Part Nostdd033/037 Model 907 , Hose Assy. Part Nostdd026/024 Model 907 , Hose Assy. Part Nostdd033/024 Model 907 , Hose Assembly Part No623d02584/182 Model 907 , Hose Assembly Part No623d02584/201 Model 907 , Hose Assy. Part Nostdd026/323 Model 907 , Hose Assy. Part Nostdd026/092 Model 907 , Hose Assy. Part Nostdd026/047 Model 907 , Hose Assy. Part Nostdd026/317 Model 907 , Hose Assy. Part Nostdd026/328 Model 907 , Hose Assembly Part No623d02584/753 Model 907 , Hose Assembly Part No623d02584/756 Model 907 , Speical Fitting Part Noeea0029310 Model 907 , Threaded Boss Part Noeea0027253 Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Reducer, M/M Part Nose012/095 Model 907 , Bonded Seal Part Nosc011/013 Model 907 , Hex Head Plug (Bsp) Part Nosc036/003 Model 907 , Threaded Boss (M12x15lg) Part Noeea0016795 Model 907 , Straight Adaptor Part Nose024/219 Model 907 , Swivel Nut Elbow Part Novu10f10e21bs Model 907 , Hose Assy. Part No907a050000065 Model 907 , Straight Adaptor Part Novu10f10e01as Model 907 , St. Adaptor Part Nose024/210 Model 907 , Straight Adaptor Part Nose024/430 Model 907 , St.Swivel Adaptor M/F Part Nose012/066 Model 907 , Reducer, M/M Part Nose012/101 Model 907 , Straight Adaptor Part Nose024/212 Model 907 , Hose Assy. Part Nostdd026/314 Model 907 , Hose Assy. Part Nostdd026/025 Model 907 , Hose Assy Part Nostdd033/023 Model 907 , Hose Assy. Part Nostdd033/039 Model 907 , Hose Assy. Part Nostdd033/031 Model 907 , Special Fitting Part Noeea0029315 Model 907 , Hydraulic Pump Part No910b050000063 Model 907 , Hydraulic Pump, Brake Oil Part No907b050000025 Model 907 , Screw Part Noeea0027587 Model 907 , Washer Part Noeea0027588 Model 907 , Seal Part Noeea0027589 Model 907 , Standard Seal Part Noeea0027590 Model 907 , Shaft Seal Part Noeea0027591 Model 907 , Ring Part Noeea0027592 Model 907 , Anti Extrusion Part Noeea0027593 Model 907 , Dowel Pin Part Noeea0027594 Model 907 , Seal Kit Part Noeea0029260 Model 907 , Pressure Filter Part No811a050000182 Model 907 , Filter Element Part Noeea0018438 Model 907 , Relief Valve Assy. Part No625b050000064 Model 907 , Relief Cartridge Part Noeea0008997 Model 907 , Seal Kit-Relief Valve,(*)Marked Items Part Noeea0009001 Model 907 , Valve, Check 50 Psi Crack Part No117439 Model 907 , Accumulator (4-Ltr) Part No811a050000191 Model 907 , Seal Kit For (*) Marked Items Part Noeea0019109 Model 907 , Sealing Ring Part Noeea0022384 Model 907 , O-Ring Part Noeea0022385 Model 907 , Brake Valve Part No917b050000013 Model 907 , Repair Kit, Brake Valve Part Noeea0025375 Model 907 , 3 Way Dcv Part No811a050000158 Model 907 , 3/2 Way Valve Part No19wl050000655 Model 907 , Gasket Part No907a050000047 Model 907 , Gasket Part No912a050000229 Model 907 , Suction Flanged Part No910a020000228 Model 907 , Stand Pipe Part No625a060000092 Model 907 , Stand Pipe (1 1/4 Bspt) Part No621a000000202 Model 907 , Special Elbow Part Noeea0012523 Model 907 , Elbow, 90 Degree M/F Part Nose012/024 Model 907 , Half Coupling Part Nobp2fka Model 907 , Special Elbow Part No912a020000477 Model 907 , Return Manifold Part No822b020000066 Model 907 , Half Coupling Part Nobp7fka Model 907 , Half Coupling Part Nobp8fka Model 907 , Coupling Part Nostdd017/014 Model 907 , Coupling Part Nostdd017/015 Model 907 , Quick Release Coupling Part No912a050000201 Model 907 , Plug Part No912a060000188 Model 907 , Manifold Block Part No917b060000025 Model 907 , Manifold Block Part No917b060000021 Model 907 , Gauge Panel Assy. Part No907a070000028 Model 907 , Bracket For Gauge Isolator Part No907b020000064 Model 907 , Pres.Gauge Isolator Valve Part No811a050000013 Model 907 , Drive Oil Pressure Gauge Part No813b000000182 Model 907 , Oil Pressure Gauge Part No917b050000080 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Head Bolt Part Nostdb035-10-25 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Socket Head Cap Screw Part No370-2141 Model 907 , Hex Nut Part No369-0105 Model 907 , Spring Washer Part Nomdw05sa Model 907 , Gauge Adaptor Part No811a060000088 Model 907 , St.Swivel Adaptor M/F Part Nose012/062 Model 907 , Filter Mounting Bracket Part No917a020000087 Model 907 , Bulkhead Bar Weldment Part No917a020000072 Model 907 , Plate Part Noeea0025411 Model 907 , Tee Adaptor Part No105635 Model 907 , Tee Adaptor Part No102273 Model 907 , O Ring Part Nos3308 Model 907 , Clamp Part Noeea0019155 Model 907 , Gauge Adaptor Part Noeea0009296 Model 907 , Hose Assembly Part No623d02584/333 Model 907 , Hose Part No625a00397/026 Model 907 , Hyd.Hose (38 Mm) Part Noeea0009461 Model 907 , Hose Clamp Part Nop9phb Model 907 , Hose Assy. Part Nostdd026/010 Model 907 , Hose Assy. Part Nostdd026/019 Model 907 , Hose Assy. Part Nostdd026/024 Model 907 , Hose Assy. Part Nostdd026/031 Model 907 , Hose Assy. Part Nostdd026/034 Model 907 , Hose Assy. Part Nostdd026/035 Model 907 , Hose Assy. Part Nostdd026/045 Model 907 , Hose Assy. Part Nostdd026/047 Model 907 , Hose Assy. Part Nostdd026/051 Model 907 , Hose Assy. Part Nostdd026/065 Model 907 , Hose Assy. Part Nostdd026/085 Model 907 , Hose Assy. Part Nostdd026/092 Model 907 , Hose Assy. Part Nostdd026/108 Model 907 , Hose Assy. Part Nostdd026/123 Model 907 , Hose Assy. Part Nostdd026/182 Model 907 , Hose Assy. Part Nostdd026/190 Model 907 , Hose Assy. Part Nostdd026/283 Model 907 , Hose Assy. Part Nostdd026/285 Model 907 , Hose Assy. Part Nostdd026/295 Model 907 , Hose Assy. Part Nostdd026/301 Model 907 , Hose Assy. Part Nostdd026/309 Model 907 , Hose Assy. Part Nostdd026/314 Model 907 , Hose Assy. Part Nostdd026/315 Model 907 , Hose Assy. Part Nostdd026/317 Model 907 , Hose Assy. Part Nostdd026/328 Model 907 , Hose Assy. Part Nostdd026/335 Model 907 , Hose Assy. Part Nostdd033/014 Model 907 , Hose Assy. Part Nostdd033/041 Model 907 , Hoseassy. Part Nostdd033/047 Model 907 , Adaptor Part No907a050000039 Model 907 , St. Adaptor (Metric To Jic) Part No917a050000060 Model 907 , St. Adaptor(Metric To Jic) Part No917a050000061 Model 907 , St. Adaptor(Metric To Jic) Part No917a050000062 Model 907 , Fitting Part Noeea0004895 Model 907 , Bonded Seal Part Nosc011/009 Model 907 , Bonded Seal Part Nosc011/016 Model 907 , Bonded Seal Part Nosc011/019 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Bonded Seal Part Nosc011/027 Model 907 , Elbow, 90 Degree M/F Part Nose012/024 Model 907 , Elbow, 90 Degree M/F Part Nose012/026 Model 907 , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/044 Model 907 , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/046 Model 907 , St.Swivel Adaptor M/F Part Nose012/066 Model 907 , St.Swivel Adaptor M/F Part Nose012/067 Model 907 , Straight Adaptor, M/M Part Nose012/082 Model 907 , Straight Adaptor, M/M Part Nose012/085 Model 907 , Straight Adaptor, M/M Part Nose012/086 Model 907 , Reducer, M/M Part Nose012/100 Model 907 , Reducer, M/M Part Nose012/101 Model 907 , St. Adaptor Part Nose024/008 Model 907 , St. Adaptor Part Nose024/009 Model 907 , St. Adaptor Part Nose024/078 Model 907 , Straight Adaptor Part Nose024/201 Model 907 , Straight Adaptor Part Nose024/202 Model 907 , Straight Adaptor Part Nose024/203 Model 907 , Straight Adaptor Part Nose024/208 Model 907 , Straight Adaptor Part Nose024/211 Model 907 , Straight Adaptor Part Nose024/214 Model 907 , Straight Adaptor Part Nose024/217 Model 907 , Straight Adaptor Part Nose024/218 Model 907 , Straight Adaptor Part Nose024/219 Model 907 , Straight Adaptor Part Nose024/220 Model 907 , Straight Adaptor Part Nose024/287 Model 907 , Tee, M/M/F Part Nose024/330 Model 907 , Straight Adaptor Part Novu10f10e16as Model 907 , Swivel Tee, 7/8 Part Novu10f10e20ds Model 907 , Swivel Nut Elbow Part Novu10f10e21bs Model 907 , St. Adaptor Part Novu10f8e16as Model 907 , St. Adaptor Part Novu12f12e16as Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Adaptor Part Novu12f12e33ds Model 907 , Adaptor Part Novu12f16e16as Model 907 , Swivel Nut Elbow Part Novu6f6e21bs Model 907 , Swivel Nut Elbow Part Novu6f6e21cs Model 907 , Swivel, Tee Part Novu6f6e25ds Model 907 , Swivel Nut Branch Tee Part Novu6f6e33ds Model 907 , Straight Adaptor Part Novu8f12e02as Model 907 , Fitting Part Novu8f12e02bs Model 907 , Hyd Fitting Part Novu8f12e16as Model 907 , Hyd Fitting Part Novu8f8e16as Model 907 , Elbow 90 Degree Part Novu8f8e21bs Model 907 , Adaptor Part Novu8f8e21cs Model 907 , Swivel Tee, 3/4 Part Novu8f8e26ds Model 907 , Hex Nut Part No369-0112 Model 907 , Bolt Hex M6x35 8.8 Zyp 5-8 M Part No370-0212 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Hex Head Bolt Part No370-0404 Model 907 , Hex Head Bolt Part No370-0405 Model 907 , Hex Socket Head Cap Screw Part No370-2338 Model 907 , Hex Socket Head Cap Screw Part No370-2411 Model 907 , Flat Washer Part Nomaw08ga Model 907 , Flat Washer Part Nomaw10ga Model 907 , Flat Washer Part Nomaw12ga Model 907 , Spring Washer Part Nomdw06sa Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Hex Head Plug (Bsp) Part Nosc036/002 Model 907 , Hex. Head Plug (1-1/16Unf-2A) Part Nosc036/054 Model 907 , Sp. Elbow Part Noeea0027448 Model 907 , Pipe Manifold Part No907a020000056 Model 907 , Coupling Part Nostdd017/012 Model 907 , Coupling Part Nostdd017/013 Model 907 , Coupling Part Nostdd017/014 Model 907 , Hex Head Plug (Bsp) Part Nosc036/001 Model 907 , Hex Head Plug (Bsp) Part Nosc036/006 Model 907 , Hex Head Plug (Bsp) Part Nosc036/008 Model 907 , O Ring Part Nos3306 Model 907 , O Ring Part Nos3310n Model 907 , O Ring Part Nos3312n Model 907 , O Ring Part Nos3316n Model 907 , O Ring Part Nos3320 Model 907 , Flow Control Valve Part Nor2c050000101 Model 907 , O Ring Part Nos2803 Model 907 , Hex Head Bolt Part Nostdb035-12-30 Model 907 , Flanged Adaptor Part No910a020000227 Model 907 , Straight Adaptor Part Nose024/201 Model 907 , O Ring Part Nos2722 Model 907 , Hex Head Bolt Part Nostdb035-10-30 Model 907 , Manifold Block Part No910b050000054 Model 907 , Straight Adaptor Part Nose024/221 Model 907 , Special Fitting Part Noeea0029644 Model 907 , Hose Assy. Part Nostdd026/084 Model 907 , Bonded Seal Part Nosc011/013 Model 907 , Straight Adaptor Part Nose024/222 Model 907 , Straight Adaptor Part Nose024/430 Model 907 , Straight Adaptor M/M Part Nose024/207 Model 907 , Straight Adaptor Part Nose024/209 Model 907 , Straight Adaptor Part Nose024/212 Model 907 , Banjo Adaptor Assy. M/M Part Nose012/144 Model 907 , St. Adaptor Part Nose024/079 Model 907 , Swivel Nut Elbow Part Novu16f16e21bs Model 907 , Hose Assy. Part Nostdd033/031 Model 907 , Hose Assy. Part Nostdd033/110 Model 907 , Hose Assy. Part Nostdd026/152 Model 907 , Hose Assy. Part Nostdd026/104 Model 907 , Hex Head Bolt Part Nostdb035-10-25 Model 907 , Threaded Boss(M10x15lg) Part Noeea0016870 Model 907 , Hose Assy. Part Nostdd026/110 Model 907 , Transmission Hydraulic Group Part No907b070000032 Model 907 , Bracket For Trans. Filter Part No917a020000075 Model 907 , Flange Elbow Part No917a050000046 Model 907 , Adapter Male/Female - Jic Part Nod06a050000050 Model 907 , Gauge Adaptor Part Noeea0009296 Model 907 , Sp. Fitting Part Noeea0026859 Model 907 , Hose Assy. Part Nostdd026/306 Model 907 , Hose Assy. Part Nostdd033/055 Model 907 , Hose Assy. Part Nostdd033/060 Model 907 , Hose Assy. Part Nostdd033/062 Model 907 , St. Adaptor Part Novu12f12e16as Model 907 , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 907 , Elbow 45 Deg. Part Novu12f12e21cs Model 907 , Straight Adaptor Part Novu6f2e02as Model 907 , Swivel Nut Elbow Part Novu6f6e21bs Model 907 , Hex Head Bolt Part No370-0402 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Straight Adaptor Part Nose024/208 Model 907 , Hex Head Bolt Part Not6gg16 Model 907 , Hex Head Bolt Part Not8gg26 Model 907 , Hex Socket Head Cap Screw Part Not8gh28 Model 907 , Spring Washer Part Now6gf Model 907 , Spring Washer Part Now8gf Model 907 , Hyd. Oil Cooler Part No917b050000120 Model 907 , Hydraulic Cooler Matrix(40Kw) Part Noeea0027901 Model 907 , Transmission Cooler Matrix(70Kw) Part Noeea0027902 Model 907 , Brake Cooler Matrix(15Kw) Part Noeea0027903 Model 907 , Fan House-Em Part Noeea0027904 Model 907 , Fan-580/7/S38zl/38/Pag/74.75 Part Noeea0027905 Model 907 , Motor Bracket-Em Part Noeea0027906 Model 907 , Hydraulic Motor Part Noeea0027907 Model 907 , Seal Kit For Hyd. Motor Part Noeea0028875 Model 907 , Ring, Snap Part Noeea0028876 Model 907 , Lip Seal Part Noeea0028877 Model 907 , Spacer Part No907a020000070 Model 907 , Hex Head Bolt Part No370-0328 Model 907 , Flat Washer Part Now6ga Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Spring Washer Part Nomdw12sa Model 907 , Hyd. Oil Cooler Mtg. Bracket Part No907b020000069 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Spring Washer Part Nomdw08sa Model 907 , Hex Head Bolt Part No370-0244 Model 907 , Hex Head Bolt Part No370-0405 Model 907 , Flat Washer Part Now5ga Model 907 , Front Control Panel Group Part No907b070000054 Model 907 , Front Control Panel Box Assy Part No907b040000006 Model 907 , Hex Head Bolt Part No370-0237 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0412 Model 907 , Mounting Plate Part No917a020000078 Model 907 , Front Panel Box Part No917b020000057 Model 907 , Clamp Part Noeea0007778 Model 907 , Front Control Panel Part No907b050000087 Model 907 , Rubber Sheet Part Noeea0025389 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Flat Washer Part Nomaw12ga Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , 7 Display Part No910b040000044 Model 907 , Connector Kit(Pv780) Part No910a040000045 Model 907 , Starting Switch Part No19wl040000073 Model 907 , Emergency Stop Push Button Part Noeea0022291 Model 907 , Emergency Stop Marker Part Noeea0029991 Model 907 , Relay Module Part Noepra040000007 Model 907 , Buzzer 24V Dc Part No19wl040000084 Model 907 , On Delay Timer (Crouzet) Part No910a040000059 Model 907 , Terminals Part Noeea0022453 Model 907 , Terminal Block(Black) Part Noeea0029389 Model 907 , Terminal End Plate Part Noeea0022455 Model 907 , End Clamps Part Noeea0021276 Model 907 , Terminal Block Part Noeea0028566 Model 907 , Terminal Block(Kut10,Yellow) Part Noeea0029453 Model 907 , Terminal Block(Kut10,Green) Part Noeea0029454 Model 907 , End Plate Part Noeea0028567 Model 907 , Mounting Rail Part Noeea0021275 Model 907 , Rect.Fork Type Terminal Part No912a040000095 Model 907 , Cable End Sleeve Terminal(2.5 Sq.Mm) Part Noeea0030029 Model 907 , Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030028 Model 907 , Cable End Sleeve Terminal(6 Sq.Mm) Part Noeea0030117 Model 907 , Plate Part Noeea0029723 Model 907 , Slotted Pan Head Screw Part Nomt05eb16g Model 907 , Hex. Nut Part Nomt05lgg Model 907 , Rubber Sheet Part Noeea0026924 Model 907 , Rubber Sheet Part Noeea0026925 Model 907 , Plate Part Noeea0028469 Model 907 , Threaded Boss Part No811a060000056 Model 907 , Hex Head Bolt Part No370-0205 Model 907 , Spring Washer Part Nomdw06sa Model 907 , Slotted Button Head Screw Part No370-5113 Model 907 , Flat Washer Part Nomaw06ga Model 907 , S.C Cable Gland(3/4Et) Part Noeea0029761 Model 907 , S.C Cable Gland(3/4Et) Part Noeea0030009 Model 907 , S.C Cable Gland(1Et) Part Noeea0029760 Model 907 , Cable Gland Pvc Hood (3/4 Et) Part Noeea0029992 Model 907 , Cable Gland Pvc Hood (1 Et) Part Noeea0029993 Model 907 , Contact Block(No) Part Noeea0027986 Model 907 , Side Control Panel Box Assy Part No907b040000008 Model 907 , Hex Head Bolt Part No370-0238 Model 907 , Hex Head Bolt Part No370-0314B Model 907 , Side Control Panel Box Part No917b020000056 Model 907 , Mounting Rail Part Noeea0021275 Model 907 , Flat Washer Part Nomaw08ga Model 907 , Flat Washer Part Nomaw10ga Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Rubber Sheet Part Noeea0025422 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Slotted Pan Head Screw Part Nomt05eb16g Model 907 , Hex Head Bolt Part No370-0205 Model 907 , Spring Washer Part Nomdw06sa Model 907 , Flat Washer Part Nomaw06ga Model 907 , Hex Nut Part No369-0106 Model 907 , Hex Nut Part No369-0110 Model 907 , Side Control Panel Part No907b050000099 Model 907 , Push Button - 3 Position Part No116602 Model 907 , Selector Switch Part Noepra040000001 Model 907 , Selector Switch (3 Pos.) Part No910a040000014 Model 907 , Mecan1905 Part No907b040000001 Model 907 , Relay - 24 Volt Part No116600 Model 907 , Relay Module Part Noepra040000007 Model 907 , Timer Part Noeea0020754 Model 907 , Dc/Dc Convertor Part No907a040000030 Model 907 , Circuit Breaker, 32A Part Noeea0024825 Model 907 , Circuit Breaker, 6A Part No19wl871050265 Model 907 , Circuit Breaker,10A Part No19wl871050023 Model 907 , Circuit Breaker, 16A Part Noeea0025390 Model 907 , Mcb Link(10 Way) Part No907a040000004 Model 907 , Multi-Level Terminal Part Noeea0029579 Model 907 , End Plate Part Noeea0029611 Model 907 , Terminal Block(Black) Part Noeea0029389 Model 907 , Terminal End Plate Part Noeea0022455 Model 907 , End Clamps Part Noeea0021276 Model 907 , Terminal Block Part Noeea0028566 Model 907 , Terminal Block(Kut10,Yellow) Part Noeea0029453 Model 907 , Terminal Block(Kut10,Green) Part Noeea0029454 Model 907 , End Plate Part Noeea0028567 Model 907 , Mounting Din Rail Part Noeea0022456 Model 907 , Marker(15) Part No910a040000026 Model 907 , S.C Cable Gland(3/4Et) Part Noeea0029761 Model 907 , S.C Cable Gland(3/4Et) Part Noeea0030009 Model 907 , S.C Cable Gland(1Et) Part Noeea0029760 Model 907 , Cable Gland Pvc Hood (3/4 Et) Part Noeea0029992 Model 907 , Cable Gland Pvc Hood (1 Et) Part Noeea0029993 Model 907 , Positive Lock Female Terminal Part Noeea0025631 Model 907 , Diode Terminal Block Part Noeea0028499 Model 907 , Diode Block End Plate Part Noeea0029314 Model 907 , Rect.Fork Type Terminal Part No912a040000095 Model 907 , Diode Circuit Part No12wl040000213 Model 907 , Threaded Boss Part No811a060000056 Model 907 , Hex Head Bolt Part No370-0205 Model 907 , Flat Washer Part Nomaw06ga Model 907 , Spring Washer Part Nomdw06sa Model 907 , Slotted Pan Head Screw Part Nomt05eb16g Model 907 , Hex Nut Part No369-0106 Model 907 , Cable Duct Part Noeea0030113 Model 907 , Sleeve,Flexib(Bend)Spireal Cut Part No912a040000144 Model 907 , Cable End Sleeve Terminal(2.5 Sq.Mm) Part Noeea0030029 Model 907 , Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030028 Model 907 , Cable End Sleeve Terminal(6 Sq.Mm) Part Noeea0030117 Model 907 , Male Connector Housing(12 Way) Part Noeea0028690 Model 907 , Male Wedge Lock(12 Way) Part Noeea0028698 Model 907 , Female Connector Housing(12 Way) Part Noeea0028694 Model 907 , Female Wedge Lock(12 Way) Part Noeea0028702 Model 907 , Male Connector Housing(6 Way) Part Noeea0028688 Model 907 , Male Wedge Lock(6 Way) Part Noeea0028696 Model 907 , Female Connector Housing(6 Way) Part Noeea0028692 Model 907 , Female Wedge Lock(6 Way) Part Noeea0028700 Model 907 , Socket For Dt Plug Part Noeea0027064 Model 907 , Pin For Dt Receptacle Part Noeea0027062 Model 907 , Terminating Resistor Link Part Noeea0026749 Model 907 , Cross Connection Link Assy Part Nostda038/05 Model 907 , Marker(0-100) Part No910a040000024 Model 907 , Marker(30) Part No910a040000025 Model 907 , Flexible Wire, 1.5 Sq.Mm, Pink Part Noeea0025274 Model 907 , Flexible Wire, 1.5 Sq.Mm, Blue Part Noeea0025275 Model 907 , Flexible Wire, 1.5 Sq.Mm, Yellow Part Noeea0025276 Model 907 , Flexible Wire, 1.5 Sq.Mm, Green Part Noeea0025277 Model 907 , Flexible Wire, 1.5 Sq.Mm, Violet Part Noeea0025278 Model 907 , Flexible Wire, 1.5 Sq.Mm, Red Part Noeea0025279 Model 907 , Flexible Wire, 1.5 Sq.Mm, Grey Part Noeea0025280 Model 907 , Flexible Wire, 1.5 Sq.Mm, White Part Noeea0025281 Model 907 , Flexible Wire, 1.5 Sq.Mm, Black Part Noeea0025282 Model 907 , Flexible Wire, 2.5 Sq.Mm, Red Part Noeea0025283 Model 907 , Flexible Wire, 6 Sq.Mm, Red Part Noeea0025285 Model 907 , Adjustable Cable Clamp Part No912a040000170 Model 907 , Heat Sleeve (5Mm) Part Noeea0027285 Model 907 , Ring Tongue Terminal Part No625a040000148 Model 907 , By-127 Diode For P.B.Station Part Noeea0002174 Model 907 , Rubber Sheet Part Noeea0026927 Model 907 , Rubber Sheet Part Noeea0026928 Model 907 , Straight Wire Butt Connector Part Noepra040000014 Model 907 , Gland Plate Part Noeea0030650 Model 907 , Duel Head Lamp Relay(24V) Part Noeea0030031 Model 907 , 6 Pole Female Connector Part No12wl040000181 Model 907 , Terminal Part Noeea0026062 Model 907 , Hex. Nut Part Nomt05lgg Model 907 , Female Connector Housing(2 Way) Part Noeea0028691 Model 907 , Female Wedge Lock(2 Way) Part Noeea0028699 Model 907 , Male Connector Housing(2 Way) Part Noeea0028687 Model 907 , Male Wedge Lock(2 Way) Part Noeea0028695 Model 907 , Multicore Control Cable(4X1.5) Part No907a040000025 Model 907 , Hose Sleeve Part No907a050000072 Model 907 , On Delay Timer (Crouzet) Part No910a040000059 Model 907 , Twin Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030690 Model 907 , Led Work Light,45W,Low Beam Part No917a040000021 Model 907 , Led Work Light,45W,Wide Flood Part No917a040000022 Model 907 , Led Beacon Part No917a040000024 Model 907 , Led Flashing Light(Amber) Part No917a040000023 Model 907 , Led Tail Light Part No907a040000018 Model 907 , Led Work Light(15W) Part Nossla040000019 Model 907 , Paired Horn Part No919a002910934 Model 907 , Hyd. Oil Temp Sensor Part No917a040000006 Model 907 , Bracket Temp Prob. Mnt. Part No912a060000126 Model 907 , Side Mnt. Level Switch (N Part No912c040000105 Model 907 , Gasket Part No627b000000121 Model 907 , Hyd. Oil Filter Clogging Indicator Part No917a040000007 Model 907 , Capacitance Oil Level Switch(Falling) Part No917a040000026 Model 907 , Fuel Sensor(907) Part No907b040000013 Model 907 , Brake Oil Temp. Switch Part No917a040000005 Model 907 , Pressure Transmitter, 250 Bar Part No910a040000001 Model 907 , Wireless Camera Recording System Part No917b040000025 Model 907 , Wireless Camera Part No910a040000034 Model 907 , Wireless Camera Display Part No910a040000056 Model 907 , Reversing Alarm Part Noeea0022223 Model 907 , Emergency Stop Control Station Part Noeea0028455 Model 907 , Emergency Stop Marker Part Noeea0029991 Model 907 , Interior Light Part No910a040000029 Model 907 , 2 Pole Amp Connector Part Noeea0025257 Model 907 , 3 Pole Delphi Packard Connector Part Noeea0025258 Model 907 , Female Terminal-Metri Pack 150 Part Noeea0026863 Model 907 , Apc 312 Harness With Connector Part No910a040000002 Model 907 , Rd120 Harness Cum Connector Part Noeea0025260 Model 907 , Multicore Control Cable(2X1.5) Part No907a040000024 Model 907 , Multicore Control Cable(4X1.5) Part No907a040000025 Model 907 , Multicore Control Cable(7X2.5) Part No907a040000022 Model 907 , Multicore Control Cable(18X2.5) Part No907a040000023 Model 907 , Multicore Control Cable For Rc Part No912a040000157 Model 907 , Can Bus Cable Part No907a040000012 Model 907 , 6 Pole Female Sealed Connector(Dtm Series) Part Noeea0028818 Model 907 , Female Connector Housing(2 Way) Part Noeea0028691 Model 907 , Female Wedge Lock(2 Way) Part Noeea0028699 Model 907 , Male Connector Housing(2 Way) Part Noeea0028687 Model 907 , Male Wedge Lock(2 Way) Part Noeea0028695 Model 907 , Female Connector Housing(6 Way) Part Noeea0028692 Model 907 , Female Wedge Lock(6 Way) Part Noeea0028700 Model 907 , Male Connector Housing(6 Way) Part Noeea0028688 Model 907 , Male Wedge Lock(6 Way) Part Noeea0028696 Model 907 , Pin For Dt Receptacle Part Noeea0027062 Model 907 , Socket For Dt Plug Part Noeea0027064 Model 907 , Junction Box Part No907b040000026 Model 907 , Local Control Station Part No907b040000029 Model 907 , Cable Gland Pvc Hood (3/4 Et) Part Noeea0029992 Model 907 , Cable Gland Pvc Hood (1 Et) Part Noeea0029993 Model 907 , Cable End Sleeve Terminal(2.5 Sq.Mm) Part Noeea0030029 Model 907 , Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030028 Model 907 , Positive Lock Female Terminal Part Noeea0025631 Model 907 , Cross Connection Link Assy Part Nostda038/05 Model 907 , Cross Connection Link Assy Part Nostda038/03 Model 907 , Cross Connection Link Assy Part Nostda038/02 Model 907 , Mounting Din Rail Part Noeea0022456 Model 907 , Multi-Level Terminal Part Noeea0029579 Model 907 , End Clamps Part Noeea0021276 Model 907 , Terminal End Plate Part Noeea0022455 Model 907 , Terminal Block(Black) Part Noeea0029389 Model 907 , Partition Plate Without Foot Part Noeea0030102 Model 907 , Battery,12V Part No12wl040000162 Model 907 , Battery Cut-Off Switch(Lockable) Part No910a040000033 Model 907 , Battery Switch Bracket Part No910a020000116 Model 907 , Battery Cable Assy. Pos. To Sw. Part No907b040000038 Model 907 , Battery Cable Assy Part No910a040000017 Model 907 , Battery Cable Assy. Sw. To Starter Part No907b040000039 Model 907 , Battery Cable Assy. Neg To Ground Part No907b040000040 Model 907 , Battery Cable Assy Part No910a040000020 Model 907 , Rubber Pad Part Noeea0027280 Model 907 , Rubber Pad Part Noeea0027279 Model 907 , Rubber Pad Part Noeea0027278 Model 907 , Airfilter Extension Cable Part Noeea0027658 Model 907 , Solenoid Connector(Led) Part Noeea0029713 Model 907 , Pg Cable Gland Pg13.5 Part Noeea0028456 Model 907 , Limit Switch Part No910a040000022 Model 907 , Plate Part Noeea0029957 Model 907 , Cable Gland(1/2 Npt) Part Noeea0029456 Model 907 , Roof Light Mtg. Bracket Part No907a020000019 Model 907 , Beacon Mtg. Bkt. Part No910a020000114 Model 907 , Light Mounting Bracket Part Noeea0029720 Model 907 , Guard Part Noeea0014429 Model 907 , Sleeve(10 Mm Dia) Part No19wl040000061 Model 907 , Sleeve(20 Mm Dia.) Part No19wl040000062 Model 907 , Cable Tie 3.6Mm X150mm Black Part No12wl040000035 Model 907 , Cable Tie 4.8Mm X 200 Mm Black Part No12wl040000040 Model 907 , Cab Lock Cable Ties Part No811a050000033 Model 907 , Clamp Part Noeea0028574 Model 907 , Clamp Part Noeea0007779 Model 907 , Clamp Part Noeea0007778 Model 907 , Hose Support Clamp Part Nostda037/32 Model 907 , Hose Support Clamp Part Nostda037/40 Model 907 , Hose Support Clamp Part Nostda037/76 Model 907 , Threaded Boss Part No811a020000105 Model 907 , Threaded Boss Part No811a060000056 Model 907 , Socket Head Cap Screw M5x35 L Part No370-2146 Model 907 , Slotted Button Head Screw Part No370-5113 Model 907 , Hex Socket Head Cap Screw Part No370-2171 Model 907 , Hex Socket Head Cap Screw Part Nomt05nh16 Model 907 , Slotted Button Head Screw Part No370-5122 Model 907 , Hex. Head Screw Part Nomt05lg16g Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0238 Model 907 , Hex Head Bolt Part No370-0404 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0237 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Hex Head Bolt Part No370-0204 Model 907 , Hex Head Bolt Part No370-0242 Model 907 , Hex Head Bolt Part No370-0142 Model 907 , Hex Socket Head Cap Screw Part No370-2170 Model 907 , Hex Head Bolt Part No370-0140 Model 907 , Spring Washer Part Nomdw05sa Model 907 , Spring Washer Part Nomdw06sa Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Spring Washer Part Nomdw04sa Model 907 , Flat Washer Part Nomaw05gag Model 907 , Flat Washer Part Nomaw06ga Model 907 , Flat Washer Part Nomaw08ga Model 907 , Flat Washer Part Nomaw10ga Model 907 , Medium Washer Part Nomaw04gcg Model 907 , Hex Nut Part No369-0106 Model 907 , Hex Nut Part No369-0108 Model 907 , Cable Tags(910) Part No910b040000036 Model 907 , Hose Sleeve Part No907a050000072 Model 907 , Hose Sleeve Part No907a050000073 Model 907 , Electronic Joystick(2 Axis) Part No917b040000013 Model 907 , Deutsche 6 Pole Male Connector Part Noeea0025246 Model 907 , Deutsche 6 Pole Female Connector Part Noeea0025247 Model 907 , Controller Part No910a040000046 Model 907 , Connector Kit(Iqan-Mc42) Part No910a040000047 Model 907 , Bracket Part No917a020000051 Model 907 , Bracket Part No917a020000052 Model 907 , Plate Part Noeea0027696 Model 907 , Hex Head Bolt Part No370-0205 Model 907 , Slotted Button Head Screw Part No370-5114 Model 907 , Hex Nut Part No369-0103 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Socket Head Cap Screw Part No370-2141 Model 907 , Battery Guard Part No907a020000052 Model 907 , Flashing Led,Red Part No912a040000216 Model 907 , Rubber Pad Part Noeea0029908 Model 907 , Yellow Sticker Kit Part No910b040000037 Model 907 , Bracket Part Noeea0031308 Model 907 , Flange Pipe Weldment Part No907b020000103 Model 907 , Expansion Bellow Part No907b050000096 Model 907 , Flange Pipe Weldment Part No907b020000100 Model 907 , Silencer Weldment Assy. Part No907b020000009 Model 907 , Flane Top Part Noeea0027144 Model 907 , Catalytic Converter With Muffler Part No917b050000121 Model 907 , Flane Bottom Part Noeea0027145 Model 907 , Flange Pipe Weldment Part No907b020000082 Model 907 , Bracket, Exhaust Part No907b020000008 Model 907 , Gasket For Exhaust Part No907a050000011 Model 907 , Gasket Part No907a050000085 Model 907 , Threaded Boss Part Noeea0027140 Model 907 , Hex Head Bolt Part No370-0611 Model 907 , Flat Washer Part Nomaw16ga Model 907 , Spring Washer Part Nomdw16sa Model 907 , Flat Washer Part Now6ga Model 907 , Flat Washer Part Now5ga Model 907 , Hex Head Bolt Part No370-0244 Model 907 , Hex Head Bolt Part No370-0250 Model 907 , Hex Nut Part No369-0108 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Nut Part No369-0110 Model 907 , Spring Washer Part Nomdw08sa Model 907 , Hex Head Bolt Part No370-0312 Model 907 , Fume Diluter Group Part No907b070000072 Model 907 , Mounting Plate, Fume Diluter Part No907b020000104 Model 907 , Flange Pipe Weldment Part No907b020000105 Model 907 , Clamp Part No912b020000419 Model 907 , Exhaust Gas Diluter Part No912b050000318 Model 907 , Gasket Part Noeea0028557 Model 907 , Hex Nut Part No369-0112 Model 907 , Flat Washer Part Nomaw12ga Model 907 , Spring Washer Part Nomdw12sa Model 907 , Spring Washer Part Nomdw16sa Model 907 , Hex Head Bolt Part Nostdb035-12-40 Model 907 , Hex Head Bolt Part Nostdb035-16-30 Model 907 , Hex Head Bolt Part Not7gg20 Model 907 , Spring Washer. Part Now7gf Model 907 , Fibre Glass Tape Part No910a050000031 Model 907 , Fiber Glass Wool Part No907a050000045 Model 907 , Galvanise Wire Part Noeea0027482 Model 907 , Heat Insulation Jacket Part No907a050000100 Model 907 , Cooler Guard Part No907b020000106 Model 907 , Grill Part No907b070000075 Model 907 , Flat Washer Part Nomaw08ga Model 907 , Spring Washer Part Nomdw08sa Model 907 , Hex Nut Part No369-0108 Model 907 , Hex Head Bolt Part No370-0248 Model 907 , Hex Head Bolt Part No370-0250 Model 907 , Support Bracket Part No907b020000037 Model 907 , Support Bracket Part No907a020000038 Model 907 , Support Bracket Part No907a020000039 Model 907 , Support Bracket Part No907a020000107 Model 907 , Support Bracket Part No907a020000108 Model 907 , Support Bracket Part No907a020000119 Model 907 , Support Bracket Part No917a020000021 Model 907 , Cover Part No907a020000004 Model 907 , Cover, Air Intake Part No907a020000057 Model 907 , Cover Part No907a020000109 Model 907 , Cover Part No907a020000110 Model 907 , Guard Plate Part No907a020000114 Model 907 , Guard Plate Part No907a020000115 Model 907 , Plate Part No907a020000116 Model 907 , Cover Part No907b020000036 Model 907 , Cover Part No907b020000111 Model 907 , Cover Part No907b020000112 Model 907 , Cover Part No907b020000113 Model 907 , Cover Part No917a020000038 Model 907 , Cover Part No917a020000039 Model 907 , Clamp Part Noeea0007778b Model 907 , Flat Washer Part Nomaw12ga Model 907 , Cover Part No917a020000041 Model 907 , Cover Part No917a020000042 Model 907 , Exhaust Cover Assy. Part No907b070000074 Model 907 , Exhaust Cover Part No907a020000117 Model 907 , Exhaust Cover Part No907a020000118 Model 907 , Cover Plate Part Noeea0033191 Model 907 , Cover Plate Part Noeeb0033187 Model 907 , Plate Part Noeea0033188 Model 907 , Plate Part Noeea0033189 Model 907 , Threaded Boss(M10x15lg) Part Noeea0016870 Model 907 , Hex Head Bolt Part No370-0206 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Flat Washer Part Nomaw06ga Model 907 , Flat Washer Part Nomaw08ga Model 907 , Spring Washer Part Nomdw06sa Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Stopper Part No917a020000040 Model 907 , Hand Rest Seat Part No907a050000069 Model 907 , Hex Nut Part No369-0108 Model 907 , Avm Part No907a050000092 Model 907 , Threaded Boss Part Noeea0003462 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Flat Washer Part Nomaw12ga Model 907 , Flat Washer Part Nomaw16ga Model 907 , Flat Washer Part Nomaw20ga Model 907 , Spring Washer Part Nomdw08sa Model 907 , Spring Washer Part Nomdw10sa Model 907 , Spring Washer Part Nomdw12sa Model 907 , Spring Washer Part Nomdw16sa Model 907 , Spring Washer Part Nomdw20sa Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Nut Part No369-0112 Model 907 , Hex Nut Part No369-0116 Model 907 , Hex Head Bolt Part No370-0240 Model 907 , Hex Head Bolt Part No370-0306 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Hex Head Bolt Part No370-0312 Model 907 , Hex Head Bolt Part No370-0316 Model 907 , Hex Head Bolt Part No370-0404 Model 907 , Hex Head Bolt Part No370-0406 Model 907 , Hex Head Bolt Part No370-0412 Model 907 , Hex Head Bolt Part No370-0606 Model 907 , Hex Head Bolt Part No370-0609 Model 907 , Hex Head Bolt Part No370-0613 Model 907 , Hex Head Bolt Part No370-0809 Model 907 , Cover, Fuel Tank Part No910a020000239 Model 907 , Gasket Part No910a050000068 Model 907 , Hex Head Bolt Part Nostdb035-12-30 Model 907 , Battery Box Part No907b020000125 Model 907 , Cover,Battery Part No910a020000213 Model 907 , Clamp, Battery Part Noeea0031720 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part Nostdb035-10-20 Model 907 , Hex Head Bolt Part Nostdb035-10-30 Model 907 , Hex Nut Part No369-0110 Model 907 , Threaded Boss Part Noeea0007149 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0403 Model 907 , Cover Part No811b020000150 Model 907 , Gasket Part No811b050000067 Model 907 , Conveyor Assy. Part No907a070000080 Model 907 , Threaded Boss Part Noeea0007149 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Bracket Part No907a070000081 Model 907 , Bracket Part No907b020000124 Model 907 , Name Plate (Fuel) Part No912a050000001 Model 907 , Name Plate (Hyd. Oil) Part No912a050000003 Model 907 , Name Plate (M/C Sr. No) Part No100618 Model 907 , Warning Plate(Do Not Stand Here) Part No016b000091012 Model 907 , Name Plate, Model Part No907a050000009 Model 907 , Decal, Tire Pres. Part No246918 Model 907 , Name Plate, Pressure Reading Part No907a050000077 Model 907 , Name Plate,Caution Safety Link Part Noxa1365 Model 907 , Name Plate, Joy Stick Operation Part No907a050000078 Model 907 , Warning Plate - Caution Crush Hazard Part No822a050000034 Model 907 , Hydraulic Oil - Identification Plate Part No822a050000035 Model 907 , Lubrication Plate Part No907a050000010 Model 907 , Voltage Indicator Plate Part No822a050000037 Model 907 , Warning Plate Part No917a050000040 Model 907 , Warning Plate - Danger Area Part No822a050000039 Model 907 , Name Plate - Steering Operation Part No822a050000040 Model 907 , Name Plate - Operator Control Part No822a050000041 Model 907 , Brake Hyd. Oil Identification Plate Part No917a050000044 Model 907 , Warning Plate- Do Not Touch Part No917a050000045 Model 907 , Name Plate-Pressure Check Points Part No917a050000083 Model 907 , Name Plate, Emergency Steering Part No907a050000076 Model 907 , Name Plate, Air Filter Part No907a050000058 Model 907 , Name Plate, Park Brake Release Part No907a050000059 Model 907 , Name Plate, Engine Start Stop Part No907a050000060 Model 907 , Name Plate, Weld Instruction Part No907a050000061 Model 907 , Name Plate, Battery Switch Part No907a050000062 Model 907 , Air Intake Kit Part No907b050000013 Model 907 , Air Cleaner Assy Part Noeea0027315 Model 907 , Hose Part Noeea0027316 Model 907 , Hose Clamp, T Bolt Part Noeea0027317 Model 907 , Precleaner, Metal Part Noeea0027318 Model 907 , Bracket Mounting Assy Part Noeea0027319 Model 907 , Bracket Mounting, Powder Coated Part Noeea0027320 Model 907 , Rain Hood, Metal Part Noeea0027321 Model 907 , Hose Elbow Part Noeea0027322 Model 907 , Hose Clamp, T Bolt Part Noeea0027323 Model 907 , Pipe Assy, Powder Coated Part Noeea0027324 Model 907 , Hose Part Noeea0027325 Model 907 , Pipe Assy, Powder Coated Part Noeea0027326 Model 907 , Bracket Assy Part Noeea0027327 Model 907 , Restriction Indicator Part Noeea0027328 Model 907 , Hose Clamp T-Bolt Part Noeea0029203 Model 907 , Hose Reducer Part Noeea0029205 Model 907 , Bracket, Air Cleaner Part No907a020000025 Model 907 , Hex Head Bolt Part No370-0304 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Flat Washer Part Nomaw10ga Model 907 , Hex Nut Part No369-0110 Model 907 , Adapter Part No907a050000020 Model 907 , Bracket, Air Filter Part Noeea0027682 Model 907 , Th. Boss Part Noeea0027216 Model 907 , Hex Head Bolt Part No370-0310 Model 907 , Filter Element, Primary Part Noeea0027698 Model 907 , Filter Element, Safety Part Noeea0027699 Model 907 , Tool Kit Part No907a070000017 Model 907 , Axle Oil Part No12wl050000144 Model 907 , Lithium Base Grease Part Noxa1417 Model 907 , Fire Extinguisher Part No625a050000110 Model 907 , Drive Screw Part Not1000 Model 907 , Engine Oil Part No907a050000006 Model 907 , Fastner Sealant Part No00ea000001155 Model 907 , Hydraulic Oil Part Nod10a050000093 Model 907 , Brake Oil Part No917a050000049 Model 907 , Centralised Lubrication System (Automatic) Part No917b050000022 Model 907 , Engine Coolant Part No907a050000007 Model 907 , Front Reflector Part No12wl040000125 Model 907 , Rear Reflector Part No12wl040000126 Model 907 , Reflective Tape (Red) Part No19wl050000631 Model 907 , Reflective Tape (White) Part No19wl050000630 Model 907 , Reflective Tape (Yellow) Part No19wl050000632 Model 907 , O Ring Kit Part No917a050000113 Model 907 , Automatic Fire Suprression System Part No907a070000027 Model 907 , Automatic Fire Detection & Supression System Part No19wl050000868 Model 907 , Bracket (Fire System) Part No19wl020000733 Model 907 , Threaded Boss Part No811a020000105 Model 907 , Hex Head Screw Part Nomt08lg16g Model 907 , Spring Washer Part Nomdw08sag Model 907 , Hex Nut Part Nomt08lgg Model 907 , Flat Washer Part Nomaw08gag Model 907 , Accumulator Charging Kit Part No811a050000124 Model 907 , Hand Pump Part No907a050000048 Model 907 , Hand Pump Part No917a050000106 Model 907 , Single Core Wire Rubber Bidding Part Nod06a050000189 Model 907 , Logo-Eimco Elecon(Engine Hood) Part No12wl050000047 Model 907 , Wheel Choke Part No910a050000034 Model 907 , E.M Tyre Inflating & Checking Device Lb Part No907a050000064 Model 907 , Engine Cooler Group Part No907b070000070 Model 907 , Cac Cooler Assy. Part No907b070000071 Model 907 , Cac With Radiator Part No907b050000094 Model 907 , Cac Cooler Mtg. Bracket Part No907b020000092 Model 907 , Hex Head Bolt Part Nostdb035-16-35 Model 907 , Spring Washer Part Nomdw16sa Model 907 , Hex Head Bolt Part Nostdb035-10-35 Model 907 , Spring Washer Part Nomdw10sa Model 907 , Flat Washer Part Nomaw10gab Model 907 , Cac Tube, Inlet Part No907b020000093 Model 907 , Cac Silicone Hose Part No907a050000028 Model 907 , T-Bolt Hose Clamp Part No907a050000034 Model 907 , Cac Tube, Outlet Part No907b020000094 Model 907 , Elbow,Cac Part No910a050000074 Model 907 , Radiator Tube, Inlet Part No907b020000095 Model 907 , Silicone Hose, Coolant Part No907a050000029 Model 907 , Silicone Hose, Coolant Part Noeea0027283 Model 907 , T-Bolt Hose Clamp Part No907a050000032 Model 907 , Silicone Hose, Coolant Part No907a050000030 Model 907 , Silicone Hose, Coolant Part Noeea0027284 Model 907 , T-Bolt Hose Clamp Part No907a050000033 Model 907 , Radiator Tube, Outlet Part No907b020000096 Model 907 , Elbow Hose, Coolant Part No907a050000031 Model 907 , Coolant Hose Part Noeea0027289/006 Model 907 , Hose Clamp Part Nop9phb Model 907 , Coolant Hose Part Noeea0027287/004 Model 907 , Hose Clamp (Fuel Circuit) Part No12wl050000172 Model 907 , Nipple Part No907a020000024 Model 907 , Bonded Seal Part Nosc011/016 Model 907 , Coolant Hose Part Noeea0027287/001 Model 907 , Coolant Hose Part Noeea0027287/006 Model 907 , Hex Head Plug (Bsp) Part Nosc036/004 Model 907 , Bonded Seal Part Nosc011/024 Model 907 , Hex Head Plug (Bsp) Part Nosc036/008 Model 907 , T-Bolt ( Hose-Clamp) (Heavey Duty) Part No19wl050000052 Model 907 , Hex Head Plug (Bsp) Part Nosc036/002 Model 907 , Bonded Seal Part Nosc011/009 Model 907 , Sponge (Side) Part No12wl050000123 Model 907 , Rubber Sheet Part Noeea0032933 Model 907 , Ball Valve(G 1/2) Part Norb2c050000137 Model 907 , Hose Assembly Part No623d02584/113 Model 907 , St.Swivel Adaptor M/F Part Nose012/064 Model 907 , Straight Adaptor, M/M Part Nose012/084 Model 907 , Tank Mounting Bracket Part No910b020000254 Model 907 , Threaded Boss (M12) Part Noeea0002561 Model 907 , Threaded Boss Part Noeea0033008 Model 907 , Hex Nut Part No369-0110 Model 907 , Hex Head Bolt Part No370-0308 Model 907 , Th. Boss Part Noeea0027216 Model 907 , Flat Washer Part Nomaw10ga Model 907 , Elbow, Coolant Tube Part No910b020000178 Model 907 , Bush (Metric) Part Nombh100/116/50A Model 907 , Bush,Metric Part Nombh100/116/70A Model 907 , Bush (Metric) Part Nombh90/106/100A Model 907 , Pin Part No917a060000009 Model 907 , Bush (Metric) Part Nombh90/106/60A Model 907 , Pin Part No917a060000015 Model 907 , Pin Part No917a060000012 Model 907 , Spherical Bearing Part Nostdc003/056 Model 907 , Seal Part Noseg251 Model 907 , O Ring Part Noseg1099 Model 907 , Wear Washer Part No912b060000117 Model 907 , Counter Balance Valve Part Noeea0027160 Model 907 , Valve Seal Kit Part Noeea0028796 Model 907 , Counter Balance Valve Part Noeea0027167 Model 907 , Valve Seal Kit Part Noeea0028811 Model 907 , Spherical Bearing Part Noeea0022799 Model 907 , Avm, Engine Part No910a050000025 Model 907 , Avm, Engine Part No19wl050000865 Model 907 , Spider Assembly (7C) Part No912a050000208 Model 907 , Radial Seal Ring Part Noeea0027541 Model 907 , Radial Seal Ring Part Noeea0027555 Model 907 , Spider Assy. - 6C Part No907a050000050 Model 907 , Relief Valve Assy. Part No625b050000064 Model 907 , Pres.Gauge Isolator Valve Part No811a050000013 Model 907 , Drive Oil Pressure Gauge Part No813b000000182 Model 907 , Oil Pressure Gauge Part No917b050000080 Model 907 , Hydraulic Motor Part Noeea0027907 Model 907 , Fan Part Noeea0027905 Model 907 , Lip Seal Part Noeea0028877 Model 907 , Selector Switch (2 Pos.) Part No910a040000013 Model 907 , Joystick Handle(Walvoil) Part No12wl040000189 Model 907 , Temperature Sensor Part Noeea0027843 Model 907 , Sensor Part Noeea0027837 Model 907 , Sensor Part Noeea0027819 Model 907 , V-Ribbed Belt Part Noeea0027827 Model 907 , Accelerator Pedal Part Noeea0027831 Model 907 , Cab Control Part Noeea0025805 Model 907 , Transmission Temp. Sensor(917) Part Noeea0026850 Model 907 , Transmission Pressure Sensor(917 Part Noeea0026851 Model 907 , Hyd. Motor - Cr Part No611b050000321 Model 907 , Hose Assy. Part Nostdd026/301 Model 907 , Gauge Adaptor Part No811a060000088 Model 907 , Oil Filter Kit Part No907a050000055 Model 907 , Bonded Seal Part Nosc011/006 Model 907 , Fuel Filter Insert Part No907a050000052 Model 907 , Fuel Filter Part No907a050000053 Model 907 , Fuel Filter Insert Part No907a050000054 Model 907 , Minimess Coupling Part No822a050000031 Model 907 , Service Control Valve Part No917b050000015 Model 907 , Repair Kit (Accumulator Charge Valve) Part Noeea0025349 Model 907 , Twin Oil Cooler Part No917b050000021 Model 907 , Power Relay(24V) Part No19wl040000115 Model 907 , Base For Change Over Relay Part No12wl040000024 Model 907 , Fuel Tank Cap With Neck Part No907a050000068 Model 907 , Suspension Tube Type-A Part Noclsa020000034 Model 907 , Cac With Radiator Part No907b050000023 Model 907 , Radiator Cooler Matrix(115Kw) Part Noeea0027908 Model 907 , Seal Kit Part Noeea0029259 Model 907 , Transmission Control Unit(Econ.A312) Part Noeea0028730 Model 907 , Tcu Harness (Apc - 312) Part Noeea0033374 Model 907 , Cooler Fan, Sucker Part No907b050000095 Model 907 , Smart Relay Part Noeea0035781c Model 907 , Bearing Shell Part Noeea0037186c Model 907 , Cylinder Head Gasket Part Noeea0031824 Model 907 , Gasket Part Noeea0031839 Model 907 , Injector Part Noeea0031872 Model 907 , Valve Cover Gasket Part Noeea0027749 Model 907 , Flange Screw Part Noeea0037183c Model 907 , Flange Screw Part Noeea0037184c Model 907 , Waste Gate Solenoid Valve Part Noeea0029451 Model 907 , Coil Part Noeea0026837 Model 907 , Up To 1000 Hrs Filter Kit Part No907a070000088 Model 907 , Oil Filter Part Noeea0035443c Model 907 , Cylinder Head Part Noeea0035983c Model 907 , Cylinder Liner Kit Part Noeea0031825 Model 907 , Gasket Part Noeea0031828 Model 907 , Plane Gasket Part Noeea0031853 Model 907 , Ecu (Without Software) Part Noeea0032212 Model 907 , Piston Part No201c000000054 Model 21 , Comp. Ring Part No201a000000072 Model 21 , Oil Ring Part No201a000000073 Model 21 , Connecting Rod Part No201e000000053 Model 21 , Retaining Ring Part No201a000000048 Model 21 , Bushing Part No201a000000049 Model 21 , Hex Head Bolt Part Not8hg24 Model 21 , Crank Sleeve Part No201b000000759 Model 21 , Crank Shaft Part No201m000000087 Model 21 , Bearing Part Nog201 Model 21 , Vent Cap Assy Part No200m000000084 Model 21 , Valve And Housing Group Part No201m000000110 Model 21 , Valve Housing Cover Part No201b000000066 Model 21 , Valve Housing Gasket Part No201a000000065 Model 21 , Gasket For Motor Housing Part No021a000000196 Model 21 , Wrist Pin Assembly Part No201m000000086 Model 21 , Hex Head Bolt Part Not8gg16 Model 21 , Cylinder Part No201c000000744 Model 21 , Cylinder Gasket Part No201a000000064 Model 21 , Gasket Set Part No201m000000637 Model 21 , Valve Housing Part No201m000000090 Model 21 , Gasket,Cover Part No021d000000182 Model 21 , Seal Part Nos1301 Model 21 , Shim Set Part Noga62a Model 21 , Axle Bearing Cap Part No021c000000181 Model 21 , Motor Pinion Part No021b000000198 Model 21 , Motor Pinion Spacer Part No021a000000197 Model 21 , Bearing Part Nog132 Model 21 , Motor Pinion Assy Part No021m000000114 Model 21 , Clutch Group Part No021m000003075 Model 21 , Clutch Shaft Assy Part No021m000003076 Model 21 , Bearing Part Nog135 Model 21 , Clucth Thrust Washer Part No021a000003082 Model 21 , Clucth Coller Assy Part No021m000000148 Model 21 , Clutch Jaw Part No021b000003081 Model 21 , Key Part Nokwt Model 21 , Clutch Pinion Assy. Part No021m000003078 Model 21 , Clucth Gear Part No021c000003080 Model 21 , Clutch Rod Part No012a000000029 Model 21 , Spring Part Noza63 Model 21 , Seal Rod Part No021a000000030 Model 21 , Shim Set Part Nogb32a Model 21 , Lower Deck Intermediate G Part No021m000000115 Model 21 , Lower Deck Intermediate Part No021m000000116 Model 21 , L.D.Gear Part No021b000000016 Model 21 , Key Part Nokwv Model 21 , L.D.Int.Pinion Part No021b000000035 Model 21 , Lower Deck Idler Group Part No021m000000117 Model 21 , Lower Deck Idler Shaft As Part No021m000000118 Model 21 , Bearing Part Nog140 Model 21 , Shaft-L.D.Gear Part No021b000000036 Model 21 , L.D.Idler Gear Part No021b000000017 Model 21 , Axle Gear Part No021b000000178 Model 21 , Key Part Nokw36 Model 21 , Axle Guage - 610 Mm Part No021a000000211 Model 21 , King Bolt Type B Part No021m000000160 Model 21 , Centering Roller Group Part No021m000001708 Model 21 , Hex Nut, Slotted Part Not16gv Model 21 , Roller Assy Part No024m000000819 Model 21 , Anchor Roller Centering Part No021b000001707 Model 21 , Ball Race,Ud Part No021c000000150 Model 21 , Balls Part Nogr16 Model 21 , Ball Race,Ld Part No021c000000151 Model 21 , Ud Gr Housing Covr Gasket Part No021c000000042 Model 21 , Upper Deck Idler Shaft Assy. Part No021m000000123 Model 21 , Upper Deck Idler Shaft Part No021a000000037 Model 21 , U.D.Idler Gear Part No021b000000018 Model 21 , Upper Deck Intermediate G Part No021m000000124 Model 21 , Upper Deck Inter. Shaft A Part No021m000000125 Model 21 , Gear Part No021b000000019 Model 21 , Woodruff Key Part Nokw29 Model 21 , U.D.Int.Shaft & Pinion Part No021a000000038 Model 21 , Bearing Part Nog138 Model 21 , Chain Reel Group Part No021m000000126 Model 21 , Chain Reel Shaft Assy Part No021m000000127 Model 21 , Chain Reel Gear Part No021b000000020 Model 21 , Chain Reel Shaft Part No021b000000039 Model 21 , Key Part Nokw34 Model 21 , Bearing Part Nog144 Model 21 , Bearing Part Nog145 Model 21 , Seal Part Nos265 Model 21 , Chain Reel Part No021c000000014 Model 21 , Chain Link Pin Part No012a000000041 Model 21 , Spring Washer Part Now6gf Model 21 , Chain Roller Assy Part No021m000000132 Model 21 , Hex Nut Part Not24gg Model 21 , Chain Roller Shaft Part No021b000000052 Model 21 , Roller, Bucket Chain Part No021a000000053 Model 21 , Lock Washer Part Nol49 Model 21 , Lock Nut Part Nol819 Model 21 , Bearing Part Nog121 Model 21 , Grease Nipple Part Nobp1fg Model 21 , Linkage Pin Cen.Drum Levr Part No021a000000046 Model 21 , Bush,Centring Drum Linkage Part No021a000000045 Model 21 , Hex Nut Part Not20gg Model 21 , Centering Drum Lever Part No021c000000043 Model 21 , Seal Part Nos219 Model 21 , Bearing Cup Part Nog510 Model 21 , Bearing Cone Part Nog511 Model 21 , Shim Set Part Nogb80a Model 21 , Hex Head Bolt Part Not10gg24 Model 21 , Centering Drum Cover Gasket Part No021a000000051 Model 21 , Hex Nut Part Not18gg Model 21 , Spring Washer Part Now18gf Model 21 , Thrust Stop Part No021b000000068 Model 21 , Bumper Spring Clamp Part No021a000000070 Model 21 , Bumper Spring Part No021a050000003 Model 21 , Spring Washer Part Now8gf Model 21 , Hex Nut Part Not8gg Model 21 , Hex Head Bolt Part Not6gg32 Model 21 , Spring Part No012a000000085 Model 21 , Bucket Handle Part No012d000000084 Model 21 , Traction Valve Lever Part No012b000000093 Model 21 , Balance Spring Part No012a000000094 Model 21 , Spring Washer Part Now5gf Model 21 , Hex Nut Part Not5hg Model 21 , Hex Head Bolt Part Not6gg24 Model 21 , Handle Assy Part No012m000000141 Model 21 , Traction Control Handle Part No012b000000096 Model 21 , Traction Handle Retainer Part No012b000000099 Model 21 , Traction Pivot Bushing Part No012a000000097 Model 21 , Shim Set Part Noga31a Model 21 , Pivot Handle Part No012a000000098 Model 21 , Traction Bonnet Group Part No012m000000140 Model 21 , Traction Valve Bonnet Part No012c000000090 Model 21 , Gasket Part Nosga30 Model 21 , Valve Stem Part No012a000000088 Model 21 , Traction Valve Disc Part No012b000000086 Model 21 , Valve Disc Spring Part No012a000000081 Model 21 , Bucket Bonnet Group Part No021m000000139 Model 21 , Valve Stem Part No012a000000082 Model 21 , Bucket Valve Disc Part No012c000000079 Model 21 , Swivel Sleeve Assy Part No012m000000138 Model 21 , Air Screen Part No012a000000076 Model 21 , Swivel Gasket Part No012a000000077 Model 21 , Drain Cock Part Nobp3rvd Model 21 , Gasket Part Nosga36 Model 21 , Bonnet Part No021d000000080 Model 21 , Grease Nipple Part Nobp1fg Model 21 , Hex Nut Part Not8gg Model 21 , Traction Air Hose Assy Part No021m000000270 Model 21 , Hex Nut, Nyloc Part Nol211 Model 21 , Flat Washer Part Now12ga Model 21 , Cable Spring Part No021a000000297 Model 21 , Rocker Arm Cable Long Part No021b000000290 Model 21 , Rocker Arm Cable Short Part No021b000000295 Model 21 , End Link Pin Part No021a000000040 Model 21 , Split Pin Part Nol119 Model 21 , End Link Part No021a000000057 Model 21 , Bucket Chain Assy Part No021m000000134 Model 21 , Chain Repair Kit Part No021m000000939 Model 21 , Bucket Bottom,Casting Part No021a030000011 Model 21 , Bucket Assy.(Type48) Part No021m000002620 Model 21 , Air Motor Assy. Part No201m000000091 Model 21 , Piston Group Assy Part No201m000000085 Model 21 , Crank Shaft Group Part No201m000000088 Model 21 , Plain Crankshaft Assembly Part No201m000000760 Model 21 , Rotary Valve Assembly Part No201m000000089 Model 21 , Axle Cap (18-30 Ga.) Part No021m000000253 Model 21 , L.D. Motor Pinion Part No150b060000001 Model 150 , Spacer Part No012a000000197 Model 150 , Bearing Part Nog130 Model 150 , L.D. Pinion Part No150b060000002 Model 150 , Bearing Part Nog132 Model 150 , Gear Part No021c000003080 Model 150 , Woodruff Key Part Nokw29 Model 150 , Gear Part No021b000000016 Model 150 , Bearing Part Nog135 Model 150 , Gear Part No150b060000005 Model 150 , Axle Cap Part No021c000000181 Model 150 , Shim Set Part Noga62a Model 150 , Seal Part Nos1301 Model 150 , Hub Part No150c060000009 Model 150 , Wheel Tyre Assy. Part No150m100000004 Model 150 , Key Part Nok12r66 Model 150 , Drain Cock Part Nobp2rve Model 150 , Hex Head Bolt Part Not10gg24 Model 150 , Washer Part Now10gf Model 150 , Key Part Nokwt Model 150 , Bolt Part Not8gsk8 Model 150 , Bolt Part Not10gg28 Model 150 , Axle Nut Part No021a000000185 Model 150 , Washer Part No021a000000184 Model 150 , Wheel Stud Part No802a000000708 Model 150 , Wheel Nut Part No802a000000709 Model 150 , Wheel Nut Part Nol262t Model 150 , Gasket Part No012a000000196 Model 150 , Washer Part Now6gf Model 150 , Cap Screw Part Not6gg28 Model 150 , Cap Screw Part Not6gg24 Model 150 , Gasket Part No200a000000065 Model 150 , Valve Housing Cover Part No200a000000066 Model 150 , Cap Screw Part Not6gg64 Model 150 , Cap Screw Part Not6gg14 Model 150 , Gasket Part No200a000000064 Model 150 , Cylinder Part No200c000000050 Model 150 , Washer Part No200a000000099 Model 150 , Cap Screw Part Not7gg16 Model 150 , Wrist Pin Part No200m000000086 Model 150 , Oil Ring Part No200a000000073 Model 150 , Comp. Ring Part No200a000000072 Model 150 , Piston Part No200c000000054 Model 150 , Connecting Rod Part No200d000000053 Model 150 , Connecting Rod Bushing Part No200a000000049 Model 150 , Retainer Ring Part No200a000000048 Model 150 , Bearing Part Nog200 Model 150 , Valve Housing Assy Part No200m000000090 Model 150 , Rotary Valve Assy Part No200m000000089 Model 150 , Air Motor Part No270m000000006 Model 150 , Bearing Part Nog107 Model 150 , Bush Part No150a060000011 Model 150 , U D Idler Gear Part No012b000000018 Model 150 , Pinion Part No012a000000038 Model 150 , U D Intetmediate Gear Part No012b000000019 Model 150 , Chain Reel Shaft Part No012b000000039 Model 150 , Bearing Part Nog138 Model 150 , Chain Reel Gear Part No012b000000020 Model 150 , Bearing Part Nog142 Model 150 , Chain Reel Part No150c030000001 Model 150 , Seal Part Nos197 Model 150 , Chain Link Pin Part No012a000000041 Model 150 , Gasket Part No012b000000042 Model 150 , Shim Set Part Noga16ax Model 150 , Chain Roller Shaft Part No630b000000081 Model 150 , Roller Part No630c000000083 Model 150 , Chain Assy. Part No021m000000133 Model 150 , End Link Pin Part No021a000000040 Model 150 , Cotter Pin Part Nol119 Model 150 , End Link Part No021a000000057 Model 150 , Spring Part No012a000000069 Model 150 , Bolt Part Not6gg16 Model 150 , Bolt Part Not8gg24 Model 150 , Washer Part Now8gf Model 150 , Bolt Part Not10gg20 Model 150 , Bolt Part Not12gg48 Model 150 , Bolt Part Not12gg20 Model 150 , Washer Part Now12gf Model 150 , Washer Part Now20gf Model 150 , Cap Screw Part Not8gg20 Model 150 , Gasket Part Nosga32a Model 150 , Seal Part Nos2300 Model 150 , Cap Screw Part Not6ggw16 Model 150 , Cap Screw Part Not6gg20 Model 150 , Bearing Part Nog280 Model 150 , Crank Shaft Part No200m000000517 Model 150 , Rotary Valve Part No270d000000002 Model 150 , Valve Housing Part No270d000000003 Model 150 , Bearing Part Nog2003 Model 150 , Bearing Part Nog2004 Model 150 , Bucket Part No150e020000094 Model 150 , Bucket Lip Part Noeea0004865 Model 150 , Seal Part Nos300 Model 150 , Bush Part Noibh48/56/48A Model 150 , Cap Screw Part Not8gh24 Model 150 , Nut Part Not10gg Model 150 , Flat Washer Part Now24gab Model 150 , Connecting Link Part No150b020000022 Model 150 , Bolt Part Not4gg8 Model 150 , Locking Plate Part Nosc009/003 Model 150 , Locking Plate Part Nosc009/002 Model 150 , Pin Part No150a060000016 Model 150 , Spring Bush Part Noibh24/32/16A Model 150 , Nut Part Not8gg Model 150 , Pin Part No150a060000015 Model 150 , Bolt Part Not4gg16 Model 150 , Lock Washer Part Now4gf Model 150 , Bolt Part Not12gg28 Model 150 , Nut Part Not12gg Model 150 , Pneumatic Cyl. Part No150b050000043 Model 150 , Pin Part No150a060000014 Model 150 , Seal Kit ( Suitable For # 150M10000005) Part Noeea0000690 Model 150 , Nipple Part Nobp8fna Model 150 , Union Elbow Part Nobp8bsl Model 150 , Adaptor Part Nose012/085 Model 150 , Manifold Part No150b020000028 Model 150 , Elbow Part Nose012/026 Model 150 , Adaptor Part Nose012/086 Model 150 , Adaptor Part Nose012/007 Model 150 , Elbow Part Nobp6bl Model 150 , Pipe Part Nobp6fn28 Model 150 , Elbow Part Nobp6bl Model 150 , Pipe Part Nobp6fn40 Model 150 , Hose Assy Part No623d02584/230 Model 150 , Adaptor Part Nose012/006 Model 150 , Adaptor Part Nose012/097 Model 150 , Elbow Part Nose012/027 Model 150 , Hose Assy Part No623d02584/238 Model 150 , Hose Assy Part No623d02584/242 Model 150 , Allen Bolt Part No370-2235 Model 150 , Washer Part Nomdw08sa Model 150 , Nut Part No369-0108 Model 150 , Bolt Part No370-0264 Model 150 , Adaptor Part Nose012/046 Model 150 , Adaptor Part Nose012/066 Model 150 , Union Part Nobp6bs Model 150 , Hose Clip Part Nop9phb Model 150 , Pn.Control Valve(1/2Bsp) Part Noeeb0010031 Model 150 , Gear Part No150c060000019 Model 150 , Side Ring Part No802b060000003 Model 150 , Locking Ring Part No802b060000002 Model 150 , Seal Part Nos115 Model 150 , Motor Pinion Part No150b060000018 Model 150 , Retaining Ring Part Nol1118 Model 150 , Circlip Part Nol1166 Model 150 , Gasket Part Nosga24a Model 150 , Gasket Part No150b050000024 Model 150 , Gasket Part No150b050000025 Model 150 , Motor Pinion Part No150b060000031 Model 150 , Spacer Part No150a060000032 Model 150 , Shaft Part No150a060000035 Model 150 , Pinion Part No150b060000033 Model 150 , Bearing Part No150a050000029 Model 150 , Gear Part No150b060000034 Model 150 , Key Part Nomk64r40 Model 150 , Key Part Nomk75r56 Model 150 , Shim Set Part No150a050000026 Model 150 , Pinion Part No150b060000037 Model 150 , Gear Part No150b060000038 Model 150 , Shaft Part No150a060000040 Model 150 , Bearing Housing Part No150b060000036 Model 150 , Gear Part No150b060000041 Model 150 , Axle Part No150c060000043 Model 150 , Gear Part No150b060000044 Model 150 , Spacer Part No150a060000042 Model 150 , Bearing Part No150a050000030 Model 150 , Seal Part Noseg242 Model 150 , Shim Set Part No150a050000027 Model 150 , Hub Part No150c060000054 Model 150 , Wheel Rim Assy Part No150d050000021 Model 150 , Tube Part No802a050000002 Model 150 , Flap Part No802a050000003 Model 150 , Bkt.Chain Roller Part No021a000000053 Model 150 , Pin Part No150b060000060 Model 150 , Spacer Part No150a060000062 Model 150 , Bearing Part Nog121 Model 150 , Gasket Part No150b050000023 Model 150 , Motor Pinion Part No150b060000047 Model 150 , Spacer Part No150a060000061 Model 150 , Seal Part Noseg170 Model 150 , Shaft Part No150a060000049 Model 150 , Gear Part No150b060000048 Model 150 , Pinion Part No150b060000051 Model 150 , Key Part Nomk60r45 Model 150 , Gear Part No150b060000050 Model 150 , Chain Reel Shaft Part No150b060000053 Model 150 , Seal Part Noseg203 Model 150 , Gear Part No150b060000052 Model 150 , Key Part Nomk66r63 Model 150 , Bumper Spring Part No150a050000022 Model 150 , Cylinder Part No150b020000108 Model 150 , Pin Part No150a060000056 Model 150 , Lock Plate Part No150a020000112 Model 150 , Keeper Plate Part Nolka24a Model 150 , Bearing Part No150a050000028 Model 150 , Circlip Part No912a050000006 Model 150 , Pin Part No150b060000058 Model 150 , Spacer Part No150a060000057 Model 150 , Chain Assy Part No150b070000021 Model 150 , Bumper Spring Clamp Part No021a000000070 Model 150 , Pin Part Nomkd25a66 Model 150 , Bush Part Noibh32/40/32A Model 150 , Spacer Part No150a020000047 Model 150 , Spring Part No824a000000277 Model 150 , Spacer Part Nogsa8d Model 150 , Gasket Part No824b000000215 Model 150 , Bush Part Nosd001/014 Model 150 , Link Part No623a000003189 Model 150 , Link Part No623a000003190 Model 150 , Pin Part No623a000003191 Model 150 , Pin Part No623a000003856 Model 150 , Hose Assy Part Nostdd018/108 Model 150 , Hose Assy Part Nostdd018/223 Model 150 , Hose Assy Part Nostdd018/226 Model 150 , Hose Assy Part Nostdd018/246 Model 150 , Hose Assy Part Nostdd018/250 Model 150 , Wheel Stud Part No150a060000064 Model 150 , Wheel Nut Part No150a060000065 Model 150 , Lock Nut Part No803b000000488 Model 150 , Collar Assy Part No00eb000000037 Model 150 , Arm (L H) Part No150d020000099 Model 150 , Arm (R H) Part No150d020000100 Model 150 , Lock Nut Part Nol274 Model 150 , Pn.Control Valve(1/2Bsp) Part Noeeb0010031 Model 150 , Motor Pinion Part No150b060000039 Model 150 , Cover, Lower Deck Gear Bo Part No150b020000113 Model 150 New , Cover,L.D.Gear Box Part No150b020000114 Model 150 New , Bearing Housing Part No150b060000046 Model 150 New , Bearing Housing Part No150b060000045 Model 150 New , Air Motor Arrangement Part No270m100000004 Model 150 New , Valve Housing Group Part No270m000000194 Model 150 New , Complete Crankshaft Group Part No200m000000530 Model 150 New , Piston Group Part No200m000000085 Model 150 New , Motor Housing Assembly Part No270m000000007 Model 150 New , Crank Sleeve Part No200b000000047 Model 150 New , Upper Deck Part No150d020000102 Model 150 New , Upper Deck Gear Box Part No150d020000101 Model 150 New , Gear Box Part No150d020000098 Model 150 New , Hopper Assy Part No150b070000074 Model 150 New , Hopper Support Bracket Part No150d020000110 Model 150 New , Upper Deck Gbox Assy. Part No150m100000055 Model 150 New , Guard, Upper Deck Part No150b020000049 Model 150 New , Hopper-Lh Part No150b020000136 Model 150 New , Hopper-Rh Part No150b020000137 Model 150 New , Hopper Door Part No150b020000134 Model 150 New , Side Plate,Rh Part No150b020000052 Model 150 New , Side Plate,Lh Part No150b020000053 Model 150 New , Shaft Part No803b000000004 Model 824 , Gear (Model 824) Part No803b000000182 Model 824 , Key Part Nok58r40 Model 824 , Motor Pinion Spacer Part No021a000000197 Model 824 , Tab Washer Part No803a000000441 Model 824 , Gear Part No803b000000183 Model 824 , Bearing Part Nog140 Model 824 , Shaft Part No803b000000007 Model 824 , Gear Part No803b000000008 Model 824 , Bearing Part Nog142 Model 824 , Key Part Nok60r40 Model 824 , Gear Part No803b000000010 Model 824 , Bearing Part Nog144 Model 824 , Shaft Part No803b000000011 Model 824 , Gasket Part No803a000000223 Model 824 , Bearing Part Nog138 Model 824 , Key Part Nok12r66 Model 824 , Hex Socket Set Screw Part Not10gs12 Model 824 , Shaft Assy Part No803m000000304 Model 824 , Bearing Part Nog146 Model 824 , Bearing Part No803a000000019 Model 824 , Bearing Cup Part Nog484 Model 824 , Bearing [Cone] Part No803a000000022 Model 824 , Key Part Nok64r58 Model 824 , Gear Part No803b000000012 Model 824 , Bearing Part Nog427 Model 824 , Bearing Cup Part Nog444 Model 824 , Oil Seal Part No803a000000020 Model 824 , Gasket Part No803d000000003 Model 824 , Shim Set Part No803b000000016 Model 824 , Plug Part No1027a050000003 Model 824 , Axle Cap Part No00eb000000094 Model 824 , Gear Box Cover Part No00ec000000131 Model 824 , Key Part Nok60r36 Model 824 , Spacer Part No803a000000124 Model 824 , Sealing Plate Part No803b000000015 Model 824 , Square Head Plug Part Nop9bp Model 824 , Dowel Pin Part No012a000001102 Model 824 , Spacer Part No803a000000121 Model 824 , Spacer Part No803a000000122 Model 824 , Spacer Part No803a000000123 Model 824 , Washer Part No621a000000074 Model 824 , Hex Nut, Nyloc Part Nol274 Model 824 , Lock Nut Part No803b000000488 Model 824 , Wheel Stud Part No802a000000708 Model 824 , Hex Nut, Nyloc Part Nol262t Model 824 , Wheel Nut Part No802a000000709 Model 824 , Upper Deck Assy. Part No824m000000324 Model 824 , Slotted Bolt (A Size) Part No824b000000415 Model 824 , Wedge Part No824b000000416 Model 824 , Spring Washer Part Now10gf Model 824 , Hex Nut Part Not10gg Model 824 , Hex Nut, Slotted Part Not24gk Model 824 , Cotter Pin Part Nol153 Model 824 , Stud Part No00ea000000122 Model 824 , Side Sheet-Lh Part No824c000000327 Model 824 , Side Sheet-Rh Part No824c000000328 Model 824 , Bumper Bar Assy. Part No824m000000113 Model 824 , Hex Nut Part Not14gg Model 824 , Spring Washer Part Now14gf Model 824 , Lock Plate For Model 824 Part No00ea000000168 Model 824 , Taper Wedge Part No00ea000000158 Model 824 , Spring Washer Part Now16gf Model 824 , Gear Box Assy. -Bucket Drive Part No824m000000334 Model 824 , Upper Chain Roller Assy Part No824m000000193 Model 824 , First Intermediate Pinion Part No630b000000247 Model 824 , Gear Chain Reel Bucket Drive Part No630c000000248 Model 824 , Bearing Cartridge Part No630b000000272 Model 824 , Brg.Cartridge Chain Reel Shaft Part No630c000000274 Model 824 , 1St Int.Brg.Cartridge Part No630b000000275 Model 824 , Gasket,Motor Pinion Cap Part No630a000000290 Model 824 , Gasket,Bucket Drive Cover Part No630c000000292 Model 824 , Chain Reel Part No004c000000169 Model 824 , Chain End Pin Lock Part No004a000000182 Model 824 , Intermediate Gear Part No824c000000041 Model 824 , Chain Roller Assy Part No021m000000132 Model 824 , Bearing Part Nog204 Model 824 , Bucket Drive Hsg.Cover Plate Part No824e000000420 Model 824 , Motor Pinion Bucket Drive Part No824b000000040 Model 824 , Bearing Part Nog448 Model 824 , Bearing Cone Part Nog449 Model 824 , Bearing Part Nog546 Model 824 , Bearing Part Nog547 Model 824 , Bearing Part Nog548 Model 824 , Bearing Part Nog549 Model 824 , Bearing Part Nog562 Model 824 , Bearing Part Nog563 Model 824 , Brass Shim Set Part Nog1214 Model 824 , Shim Set Part Nog1215 Model 824 , Shim Set Part Nog1227 Model 824 , Seal Part Nos300 Model 824 , Key Part Nok10e60 Model 824 , Key Part Nok12e58 Model 824 , Key Part Nok8r34 Model 824 , Hex Head Bolt Part Not8ggw20 Model 824 , Hex Head Bolt Part Not8ggw16 Model 824 , Inter.Gear For Buc.Drive Part No630c000000245 Model 824 , 2Nd Int.Pinion Bucket Drive Part No630c000000249 Model 824 , Bearing Cone Part Nog533 Model 824 , Bearing Cup Part Nog534 Model 824 , Bearing Cone Part Nog531 Model 824 , Bearing Cup Part Nog532 Model 824 , Key Part Nok12e28 Model 824 , Chain Real Shaft Part No630c000000258 Model 824 , Square Head Plug Part Nobp2bp Model 824 , Pipe Plug Part Nobp6bp Model 824 , Plug, Csk Square Part Nobp5bpa Model 824 , Chain Roller Shaft Part No630b000000081 Model 824 , Shim Set Part Noga16ax Model 824 , Bearing Cone Part Nog403 Model 824 , Bearing Cup Part Nog416 Model 824 , Chain Roller Part No630c000000083 Model 824 , Gasket Part Nosga32a Model 824 , Seal Part Nos2300 Model 824 , Grease Fitting Part Nop2fg Model 824 , Retainer Plate Part No630a000000138 Model 824 , Chain Roller Cap Part No630b000000084 Model 824 , Chain Roller Shaft Part No021b000000052 Model 824 , Bearing Part Nog121 Model 824 , Roller, Bucket Chain Part No021a000000053 Model 824 , Lock Washer Part Nol49 Model 824 , Lock Nut Part Nol819 Model 824 , Spring Washer Part Now24gf Model 824 , Hex Nut Part Not24gg Model 824 , Bucket Chain Part No824m000000157 Model 824 , Bucket Chain Assy Part No630m000002361 Model 824 , End Link Pin Part No621a000000666b Model 824 , Cylinder Assy Part No803m000000099 Model 824 , Collar Assy Part No00eb000000037 Model 824 , Rocker Arm Cable Part No630b000002487 Model 824 , Cable Spring Part No630a000000042 Model 824 , Bumper Spring Part No024b000000220 Model 824 , Pin Part No803b000000138 Model 824 , Cable Pin Part Nohra196 Model 824 , Hex Nut, Nyloc Part Nol213 Model 824 , Cotter Pin Part Nol163 Model 824 , Rocker Arm R.H. Part No824m000000380 Model 824 , Rocker Arm L.H. Part No824m000000378 Model 824 , Rocker Arm Yoke Bar Part No824d000000101 Model 824 , Air Motor Assy Part No201m000005046 Model 824 , Gasket For Motor Housing Part No021a000000196 Model 824 , Wrist Pin Assembly Part No201m000000086 Model 824 , Cylinder Part No201c000000744 Model 824 , Cylinder Gasket Part No201a000000064 Model 824 , Bearing Part Nog267 Model 824 , O Ring Part No621a000000545 Model 824 , Valve Housing Cover Part No271c000000020 Model 824 , Ext Circlip 5100-255 Part Nol1126 Model 824 , Bearing Part Nog134 Model 824 , Oil Ring Part No201a000000073 Model 824 , Piston Part No201c000000054 Model 824 , Comp. Ring Part No201a000000072 Model 824 , Vent Cap Assy Part No200m000000084 Model 824 , Drain Cock, Valve Part Nobp2rve Model 824 , Plug,Sq.Head Part Nop2fp Model 824 , Crank Shaft Group Plain Part No201m000000465 Model 824 , Bearing Part Nog278 Model 824 , Bushing Part No201a000000049 Model 824 , Crank Sleeve Part No201b000000759 Model 824 , Retaining Ring Part No201a000000048 Model 824 , Connecting Rod Part No201e000000053 Model 824 , Bearing Adaptor Part No201a000000733 Model 824 , Crank Shaft Assy Part No201m000000761 Model 824 , Hex Head Bolt Part Not8hg24 Model 824 , Cap Screw Washer Part No201a000000099 Model 824 , Rotary Valve Part No271d000000002 Model 824 , Valve Housing Part No271e000000004 Model 824 , Motor Housing Part No201e000000763 Model 824 , Pitcher Tee Part No623a000002559 Model 824 , Elbow M/F Taper Seat Part Nobp7bsla Model 824 , Sediment Trap Assy. Part No623m000002511 Model 824 , Union Elbow,90 Degree F/F Part Nobp7bsl Model 824 , Union Part Nobp7bsa Model 824 , Union, Female Part Nobp7bs Model 824 , Elbow,Std.90 Degree F/F Part Nobp7bl Model 824 , Elbow Std 45 Deg. Part Nop9bla Model 824 , Elbow Street, 45 Degree M/F Part Nobp7blc Model 824 , Close Nipple Part Nobp9fna Model 824 , Nipple Part Nobp7fna Model 824 , Elbow,45 Degree F/F Part Nobp7bla Model 824 , Stand Pipe Part No623a000002655 Model 824 , Hose Clip Part Nop105phb Model 824 , Stand Pipe (1 1/4 Bspt) Part No621a000000202 Model 824 , Hose Clamp Part Nop9phb Model 824 , Hose Clip Part Nop13phb Model 824 , Hose Clamp Part Nop10phb Model 824 , Nipple Part Nobp7fn40 Model 824 , Nipple Part Nobp7fn32 Model 824 , Nipple Part Nobp7fn20 Model 824 , Nipple Part Nobp7fn28 Model 824 , Nipple Part Nobp7fn44 Model 824 , Nipple Part Nobp7fn48 Model 824 , Nipple Part Nobp9fn30 Model 824 , Nipple Part Nobp7fn34 Model 824 , Air Control Valve Assy Part No824m000000272 Model 824 , Air Control Valve Assy. Part No824m000000274 Model 824 , Control Handle Assy Part No623c000003187 Model 824 , Control Handle Assy.L.H. Part No623c000003195 Model 824 , Link Part No623a000003189 Model 824 , Link Part No623a000003190 Model 824 , Pin Part No623a000003191 Model 824 , Pin Part No623a000003856 Model 824 , Valve Manifold (Traction) Part No824c000000267 Model 824 , Tab Washer Part Nosd014/019 Model 824 , E Clip - 9 Mm Part Nosc020/012 Model 824 , Valve Manifold Part No824c000000294 Model 824 , Control Handle Part No824c000000295 Model 824 , Air Control Vlv Assy-Service Part No824b070000011 Model 824 , Latch Part No824b000000268 Model 824 , Valve Handle Grip Part No621a000000110 Model 824 , Cap Part No024b000000794 Model 824 , Spacer Part Nogsa8d Model 824 , Spring Part No824a000000277 Model 824 , Hex Socket Head Cap Screw Part Not8gmn32 Model 824 , Gasket For Cont.Valvebody Part No824b000000215 Model 824 , Bush Part Nosd001/014 Model 824 , Flat Washer Part Now8ga Model 824 , Spring Washer Part Now6gf Model 824 , Valve End Plate. Part No824m000000269 Model 824 , Swivel Assy Part No623m000004263 Model 824 , Oiler Head Assy Part No623m000002749 Model 824 , Screen Oiler Cap Part No630a000000273 Model 824 , Oiler Filler Plug Part No630a000000271 Model 824 , Drain Cock Part Nobp3rvd Model 824 , Air Screen Part No012a000000076 Model 824 , Lock Washer Part Nolla5 Model 824 , Gasket Part Nosga24a Model 824 , Flat Washer Part Nowa1 Model 824 , Flat Washer Part Nowa2 Model 824 , Bucket Bottom,Cast Part No824d000000229 Model 824 , Bucket Assy.(0.425 Cu.M.) Part No824m000000231 Model 824 , Hull Group Part No824m100000013 Model 824 New , Basic Gear Box Part No824m100000014 Model 824 New , Square Head Plug Part Nop4bp Model 824 New , Gear Box Part No824m000000314 Model 824 New , Spacer(Large) Part No824b000000401 Model 824 New , Spacer (Small) Part No824b000000402 Model 824 New , Tab Washers Part Nosd014/065 Model 824 New , Tab Washers Part Nosd014/013 Model 824 New , Tab Washer Part Nosd014/063 Model 824 New , Wheel Assy. Part No824a070000012 Model 824 New , Tyre 7.00X12x14 Ply Part No824a050000006 Model 824 New , Upper Deck Group Part No824b070000013 Model 824 New , Motor Mtg. Cover Part No201c000005043 Model 824 New , Motor Housing Assy Part No201m000000762 Model 824 New , Hex Head Plug (Bsp) Part Nosc036/009 Model 824 New , Crank Shaft Group Part No201m000005052 Model 824 New , Bucket Drive Housing Part No824e000000333 Model 824 New , Upper Deck Part No824c020000033 Model 824 New , Rail Thrust End-Rh Part No824d000000344 Model 824 New , Rail Thrust End-Lh Part No824d000000345 Model 824 New , Rocker Arm Group Part No824m000000382 Model 824 New , Pneumatic Control Group Part No824b070000016 Model 824 New , Oiler Bottle Assy. Part No630m000005161 Model 824 New , Air Control Valve Assy.-Traction Part No824b070000014 Model 824 New , Air Control Valve , Service Part No824b070000015 Model 824 New , Ball Valve Part No150a050000039 Model 824 New , Needle Valve Part No150a050000033 Model 824 New , Tee,Special Part No824a020000024 Model 824 New , Tee, Reducing Branch Part Nobp8bts7 Model 824 New , Coupling Part Nostdd017/012 Model 824 New , Bearing Cup/Cone Part Nog484/803A000000022 Model 824 New , Bearing Cup/Cone Part Nog427/444 Model 824 New , Bearing Cup/Cone Part Nog448/449 Model 824 New , Bearing Cup/Cone Part Nog546/547 Model 824 New , Bearing Cup/Cone Part Nog548/549 Model 824 New , Bearing Cup/Cone Part Nog562/563 Model 824 New , Bearing Cup/Cone Part Nog533/534 Model 824 New , Bearing Cup/Cone Part Nog531/532 Model 824 New , Bearing Cup/Cone Part Nog403/416 Model 824 New , Bearing Cup/Cone Part Nog510/G511 Model 824 New , Front End Assy.(Pp 2.0 Cu.M.) Part No912b070000383 Model 912Lhd , Arm Assy.(Pp Bkt.) Part No912m100000299 Model 912Lhd , Arm (P.P. Bucket) Part No912d020000409 Model 912Lhd , Bush,Metric Part Nombh100/116/70A Model 912Lhd , Lever Assy. Part No912m100000249 Model 912Lhd , Dump Lever Part No912c030000021 Model 912Lhd , Bush (Metric) Part Nombh125/145/100A Model 912Lhd , Link Assy. Part No912a070000297 Model 912Lhd , Link Part No912a030000031 Model 912Lhd , Bush (Metric) Part Nombh75/85/75A Model 912Lhd , Roll Back Cylinder Part No912b050000282 Model 912Lhd , Spherical Bearing Part Nostdc003/047 Model 912Lhd , Circlip Part Noeea0016332 Model 912Lhd , Grease Nipple Part Noeea0015106 Model 912Lhd , Seal Kit (* Marked Items) Part Noeea0016352 Model 912Lhd , Valve -Seal Kit ( * ) Part Noeea0020818 Model 912Lhd , Circlip Part Noeea0021612 Model 912Lhd , Grease Nipple With Cap Part Noeea0020796 Model 912Lhd , Seal Kit For (*) Marked Item Part Noeea0021634 Model 912Lhd , Lift Cylinder Part No912b050000283 Model 912Lhd , Head End Cover Part Noeea0016338 Model 912Lhd , Load Cartridge Valve Part Noeea0015117 Model 912Lhd , Counter Balance Valve Part Noeea0020817 Model 912Lhd , Seal Kit For (*) Marked Item Part Noeea0021635 Model 912Lhd , P.P. Bucket Assy.(2.0 Cu.M.) Part No912m100000265 Model 912Lhd , Bucket,Push Plate Part No912m100000266 Model 912Lhd , Lip, Bucket Part No912c030000017 Model 912Lhd , Spacer Part Noeea0020665 Model 912Lhd , Locking Ring Part Noeea0002017 Model 912Lhd , Push Plate,Upper Part No912d020000355 Model 912Lhd , Spacer Part Noeea0009768 Model 912Lhd , Spacer Part Noeea0020664 Model 912Lhd , Push Plate,Lower Part No912c020000356 Model 912Lhd , Shaft Upper Part No912a060000130 Model 912Lhd , Shaft Lower Part No912a060000129 Model 912Lhd , Flat Washer Part Nomaw24ga Model 912Lhd , Push Plate Cylinder Part No912b050000285 Model 912Lhd , Circlip Part Noeea0015103 Model 912Lhd , Circlip Part Noeea0020952 Model 912Lhd , Spherical Bearing Part Nostdc003/036 Model 912Lhd , Seal Kit For (*) Marked Item Part Noeea0021637 Model 912Lhd , Pin Part No912b060000138 Model 912Lhd , Pin (F.F. To R/B) Part No811b060000117 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-120 Model 912Lhd , Spring Washer Part Nomdw10sa Model 912Lhd , Hex Head Bolt Part Nostdb035-10-75 Model 912Lhd , Pin (Arm - Bucket) Part No912b060000113 Model 912Lhd , Pin (Arm - Bucket) Part No912b060000114 Model 912Lhd , Pin (Link-Lev/Bucket) Part No912b060000136 Model 912Lhd , Pin (F.F.- Dump Cyl.) Part No912b060000101 Model 912Lhd , Pin (Lever-Dump Cyl.) Part No912b060000137 Model 912Lhd , Pin (F.F.- Arm) Part No912b060000106 Model 912Lhd , Pin (F.F.- Arm) Part No912b060000107 Model 912Lhd , Pin (F.F.- Lift Cyl.) Part No912b060000108 Model 912Lhd , Pin (Arm - Lift Cyl.) Part No912b060000111 Model 912Lhd , Pin (Arm/Lever) Part No912b060000135 Model 912Lhd , Hex Head Bolt Part Nostdb035-20-55 Model 912Lhd , Hex Head Bolt Part Nostdb035-20-45 Model 912Lhd , Hex Socket Head Cap Screw Part No370-2608 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-150 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-35 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-35 Model 912Lhd , Spring Washer Part Nomdw20sa Model 912Lhd , Spring Washer Part Nomdw16sa Model 912Lhd , Hex Nut Part No369-0112 Model 912Lhd , Grease Nipple Part Nobp1fg Model 912Lhd , Hex Head Bolt Part Nostdb035-16-35 Model 912Lhd , Pin Assy. Part No912b020000479 Model 912Lhd , Pin Part No912b060000161 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-70 Model 912Lhd , Pin Assy. Part No912b020000480 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-25 Model 912Lhd , Rubber Guard-Wheel Part No912a050000232 Model 912Lhd , Clamp Part Noeea0007778 Model 912Lhd , Clamp Part Noeea0007779 Model 912Lhd , Clamp Part Noeea0007780 Model 912Lhd , Rear End Assy Part No912c070000398 Model 912Lhd , Boss Part No19wl020000427 Model 912Lhd , Suction Pipe Assy Part Noeea0033572 Model 912Lhd , Threaded Boss Part Noeea0028450 Model 912Lhd , Canopy Bkt Part No912a020000826 Model 912Lhd , Spherical Bearing Part Nostdc003/056 Model 912Lhd , Bush,Metric Part Nombh150/170/140A Model 912Lhd , Wear Washer Part No912b060000117 Model 912Lhd , Seal Part Noseg251 Model 912Lhd , O Ring Part Noseg1099 Model 912Lhd , Hex Socket Head Cap Screw Part No370-2232 Model 912Lhd , Steering Cylinder Part No912b050000284 Model 912Lhd , Circlip Part Noeea0016355 Model 912Lhd , Bearing Part Nostdc003/030 Model 912Lhd , Seal Kit (* Marked Items) Part Noeea0016353 Model 912Lhd , Seal Kit For (*) Marked Item Part Noeea0021636 Model 912Lhd , Canopy Assy Part No912b070000379 Model 912Lhd , Flat Washer Part Nomaw16gag Model 912Lhd , Hex Head Bolt Part Nostdb035-16-45 Model 912Lhd , Flat Washer Part Nomaw20gag Model 912Lhd , Washer Part Nomaw16gcg Model 912Lhd , Hex Head Bolt Part Nostdb035-16-60 Model 912Lhd , Spacer Part No912a060000195 Model 912Lhd , Bolster (M/C) Part No912b020000839 Model 912Lhd , Seat- Hyd Suspension Part No907a050000093 Model 912Lhd , Fuel Tank Cover Part No912a020000797 Model 912Lhd , Return Pipe Part Noeea0033571 Model 912Lhd , Pipe Part Noeea0031079 Model 912Lhd , Fuel Tank Cap With Neck Part No907a050000068 Model 912Lhd , Gasket,Diesel Tank Cover Part No910a050000078 Model 912Lhd , Cover Part No811b020000150 Model 912Lhd , Gasket Part No811b050000067 Model 912Lhd , Plug Part No1027a050000003 Model 912Lhd , Steel Ball Part Nogr6 Model 912Lhd , Oil Level Window Part No241a000000284 Model 912Lhd , Hex Hd Bolt (Bolster) Part No912a060000133 Model 912Lhd , Suction Strainer Part No625b050000070 Model 912Lhd , Pin (F.F.- St.Cyl.) Part No912b060000104 Model 912Lhd , Pin (R.F.- St.Cyl.) Part No912b060000105 Model 912Lhd , Spacer Part No912a060000123 Model 912Lhd , Clamp Half Part No912b060000115 Model 912Lhd , Pin (F.F.- R.F.) Part No912b060000109 Model 912Lhd , Clamp Half Part No912b060000116 Model 912Lhd , Bonded Seal Part Nosc011/027 Model 912Lhd , Drain Cock, Valve Part Nobp2rve Model 912Lhd , Strainer Part No102135 Model 912Lhd , O Ring Part No103967 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-25 Model 912Lhd , Tank Cap Assembly Part No229334 Model 912Lhd , Hex Head Bolt Part Nostdb035-08-30 Model 912Lhd , Spring Washer Part Nomdw08sa Model 912Lhd , Spring Washer Part Nomdw24sa Model 912Lhd , Hex Head Bolt Part Nostdb035-12-90 Model 912Lhd , Flat Washer Part Nomaw12ga Model 912Lhd , Hex Head Bolt Part Nostdb035-08-80 Model 912Lhd , Hex Nut Part No369-0108 Model 912Lhd , Hex Head Bolt Part Nostdb035-16-160 Model 912Lhd , Hex Nut Part No369-0116 Model 912Lhd , Lock Wire (As Required) Part Nol400 Model 912Lhd , Rear Reflector Part No12wl040000126 Model 912Lhd , Threaded Boss Part No016a000099060 Model 912Lhd , Link Part Noeea0004049 Model 912Lhd , Hex Head Bolt Part Not12gg24 Model 912Lhd , Handle, Operator Part No912a020000557 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-45 Model 912Lhd , Spring Washer Part Now12gf Model 912Lhd , Fuel Level Gauge Part No912b050000314 Model 912Lhd , Fuel Level Guard Part Noeea0025768 Model 912Lhd , Hex Socket Head Cap Screw Part No370-2206 Model 912Lhd , Gasket Part No910a050000068 Model 912Lhd , Cover, Fuel Tank Part No910a020000239 Model 912Lhd , Cover, Battery Part No912a020000897 Model 912Lhd , Pipe Part No912a020000830 Model 912Lhd , Engine Assy (Deutz) Part No912b070000393 Model 912Lhd , Engine (Deutz 90 Kw) Part No912b050000336 Model 912Lhd , Engine Mtg. Front Part No912a020000783 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-110 Model 912Lhd , Nyloc Nut Part No369-0612 Model 912Lhd , Fuel Line (Circuit) Part No912b070000384 Model 912Lhd , Diesel Hose Part No917a050000052 Model 912Lhd , Hollow Screw Part No12wl4195996a Model 912Lhd , Sealing Ring Part No12wl050000087 Model 912Lhd , Banjo Bolt Part No822a050000047 Model 912Lhd , Washer, Banjo Bolt Part No822a050000046 Model 912Lhd , Diesel Hose Part No912a050000371 Model 912Lhd , Fuel Hose Part No12wl050000404 Model 912Lhd , Hose Clamp (Fuel Circuit) Part No12wl050000172 Model 912Lhd , Bracket (Fuel Filter) Part Noeea0033563 Model 912Lhd , Hex Head Screw Part Nomt05lg10g Model 912Lhd , Spring Washer Part Nomdw05sa Model 912Lhd , Banjo Connector Part No12wl050000213 Model 912Lhd , Transmission (912B Mk-Ii) Part No912d050000160 Model 912Lhd , Tube Assy. Part Noeea0013743 Model 912Lhd , O Ring Part Noeea0013082 Model 912Lhd , Tube Clip Part Noeea0019348 Model 912Lhd , Tube Assy. Part Noeea0013741 Model 912Lhd , Tube Slleve Part Noeea0005696 Model 912Lhd , Sleeve Lock Part Noeea0008046 Model 912Lhd , Input Shaft Part Noeea0013744 Model 912Lhd , Output Shaft Front Bearing Part Noeea0005866 Model 912Lhd , Retainer Ring Part Noeea0008035 Model 912Lhd , Gear Part Noeea0013746 Model 912Lhd , Bearing Part Noeea0013745 Model 912Lhd , Output Shaft Oil Seal Part Noeea0005867 Model 912Lhd , Air Breather Part Noeea0005680 Model 912Lhd , Plug Part Noeea0013748 Model 912Lhd , Screen Assy. Gasket Part Noeea0005687 Model 912Lhd , Screw Part Noeea0008056 Model 912Lhd , Screw-Converter Housing Part Noeea0013076 Model 912Lhd , Lock Washer Part Noeea0005685 Model 912Lhd , Screw Part Noeea0008052 Model 912Lhd , Cap Screw Part Noeea0019349 Model 912Lhd , Lock Washer Part Noeea0013742 Model 912Lhd , Sleeve Part Noeea0008045 Model 912Lhd , Trans. Case & Tube Assy. Part Noeea0013750 Model 912Lhd , Clip Part Noeea0013109 Model 912Lhd , Pressure Tube Part Noeea0008060 Model 912Lhd , Rivet Part Noeea0008072 Model 912Lhd , Cap Screw Part Noeea0019350 Model 912Lhd , Washer Part Noeea0013112 Model 912Lhd , O Ring Part Noeea0011654 Model 912Lhd , Tube Part Noeea0011588 Model 912Lhd , Oil Distributor Part Noeea0011609 Model 912Lhd , Dowel Pin Part Noeea0008061 Model 912Lhd , Magnetic Drain Plug Part Noeea0005708 Model 912Lhd , Screen Assembly Part Noeea0005688 Model 912Lhd , Bushing (Not Shown) Part Noeea0013116 Model 912Lhd , Washer-Shim (Not Shown) Part Noeea0013117 Model 912Lhd , O Ring (Not Shown) Part Noeea0019352 Model 912Lhd , Tube Assy. Part Noeea0013110 Model 912Lhd , Oring, Suction Line Part Noeea0005966 Model 912Lhd , Pressure Tube Part Noeea0011587 Model 912Lhd , Cover Part Noeea0013751 Model 912Lhd , Nut Part Noeea0008079 Model 912Lhd , Stud Part Noeea0011561 Model 912Lhd , Pipe Plug Part Noeea0005683 Model 912Lhd , Gear(27T) Part Noeea0013738 Model 912Lhd , Gear-High Range 52T Part Noeea0011585 Model 912Lhd , Gear-Drive Low 4Th. 26T Part Noeea0013737 Model 912Lhd , Group Reverse 3Rd Shaft Part Noeea0019403 Model 912Lhd , Piston Ring Part Noeea0008081 Model 912Lhd , Front Bearing Retaing Ring Part Noeea0005808 Model 912Lhd , Washer Part Noeea0013140 Model 912Lhd , Snap Ring Part Noeea0008084 Model 912Lhd , Retainer Ring Part Noeea0008086 Model 912Lhd , Inner Disc Part Noeea0013144 Model 912Lhd , Assy. Clutch Piston & Seals Part Noeea0019377 Model 912Lhd , Outer Seal Part Noeea0008091 Model 912Lhd , Seal-Clutch Piston Metering Part Noeea0019354 Model 912Lhd , Assy-Clutch Piston & Seals Part Noeea0022169 Model 912Lhd , Retainer Spring Part Noeea0022171 Model 912Lhd , Snap Ring Retainer Part Noeea0008098 Model 912Lhd , Clutch Drive Gear Bearing Part Noeea0005814 Model 912Lhd , Return Spring Part Noeea0008102 Model 912Lhd , Bearing Part Noeea0008104 Model 912Lhd , Snap Ring Part Noeea0008105 Model 912Lhd , Spacer Part Noeea0008106 Model 912Lhd , Shield Out Part Noeea0008107 Model 912Lhd , Rear Bearing Part Noeea0013151 Model 912Lhd , Retainer Ring Part Noeea0008109 Model 912Lhd , Front Bearing Part Noeea0013142 Model 912Lhd , Front Bearing Snap Ring Part Noeea0005809 Model 912Lhd , Clutch Driven Gear Bearing Part Noeea0005811 Model 912Lhd , Spring Retainer Snap Ring Part Noeea0005820 Model 912Lhd , Washer Assy. Part Noeea0013150 Model 912Lhd , Ring Retainer Part Noeea0013162 Model 912Lhd , Sanp Ring Part Noeea0013163 Model 912Lhd , Assy-Fwd & 2Nd Shaft,Hub,Drum & Plug Part Noeea0019356 Model 912Lhd , Seal-Clutch Piston -Outer Part Noeea0022170 Model 912Lhd , Gear-2Nd 30T Part Noeea0011621 Model 912Lhd , Assy-Low Shaft,Hub,Drum & Plug Part Noeea0019357 Model 912Lhd , Assy-Low Hub & Drum Part Noeea0019358 Model 912Lhd , O Ring Part Noeea0013178 Model 912Lhd , Retaining Ring Part Noeea0013175 Model 912Lhd , Shaft Part Noeea0013753 Model 912Lhd , Plug Part Noeea0013179 Model 912Lhd , Assy-Clutch Piston & Seals Part Noeea0019359 Model 912Lhd , Clutch Inner Disc Part Noeea0008115 Model 912Lhd , Spring Part Noeea0013167 Model 912Lhd , Retainer Spring Part Noeea0013168 Model 912Lhd , Bearing Spacer Part Noeea0013170 Model 912Lhd , Spring Retainer Part Noeea0008124 Model 912Lhd , Ring Retainer Part Noeea0013169 Model 912Lhd , Gear(54T) Part Noeea0013752 Model 912Lhd , Bearing Assy. Part Noeea0013171 Model 912Lhd , Pilot Bearing Part Noeea0008130 Model 912Lhd , Bearing Cup Part Noeea0008156 Model 912Lhd , Cap Part Noeea0013756 Model 912Lhd , Screw Part Noeea0008122 Model 912Lhd , Lock Washer Part Noeea0005729 Model 912Lhd , O-Ring Part Noeea0013755 Model 912Lhd , O Ring Part Noeea0005960 Model 912Lhd , Bearing Cup Part Noeea0014098 Model 912Lhd , Bearing Cone Part Noeea0013173 Model 912Lhd , Shim (.004) Part Noeea0013757 Model 912Lhd , Shim (.007) Part Noeea0013758 Model 912Lhd , Shim (.01) Part Noeea0013759 Model 912Lhd , Shim (.02) Part Noeea0013760 Model 912Lhd , Snap Ring Part Noeea0013135 Model 912Lhd , Assy-4Th Hub & Drum Part Noeea0019360 Model 912Lhd , Assy-Idler Shaft,Gear And Plugs Part Noeea0019361 Model 912Lhd , Shaft And Bearing Assy. Part Noeea0013189 Model 912Lhd , Bearing Lock Ball Part Noeea0008138 Model 912Lhd , Locating Ring Part Noeea0008139 Model 912Lhd , Washer Part Noeea0013764 Model 912Lhd , Disc Hub Nut Part Noeea0013224 Model 912Lhd , Gasket Part Noeea0008141 Model 912Lhd , Cap Part Noeea0013765 Model 912Lhd , Ber.Cap Stud Lock Washer Part Noeea0005861 Model 912Lhd , Screw Part Noeea0013766 Model 912Lhd , Clutch Outer Disc Part Noeea0008088 Model 912Lhd , Spring Retainer Part Noeea0008101 Model 912Lhd , Spring Retainer Part Noeea0008103 Model 912Lhd , Snap Ring Part Noeea0011575 Model 912Lhd , Impeller Hub Gear Bearing Part Noeea0005738 Model 912Lhd , Gear-4Th Clutch & Hub 23T Part Noeea0019363 Model 912Lhd , Spacer Part Noeea0011595 Model 912Lhd , Bearing Part Noeea0011566 Model 912Lhd , Piston Ring Part Noeea0008224 Model 912Lhd , Oil Seal Part Noeea0013190 Model 912Lhd , Bearing Cap Part Noeea0008145 Model 912Lhd , Shim (.010) Part Noeea0008148 Model 912Lhd , Shim (.020) Part Noeea0008149 Model 912Lhd , Oring Part Noeea0008150 Model 912Lhd , Bearing Cup Part Noeea0011629 Model 912Lhd , Bearing Cone Part Noeea0013191 Model 912Lhd , Gear Spacer Part Noeea0013192 Model 912Lhd , Output Shaft Part Noeea0013193 Model 912Lhd , O Ring Part Noeea0008157 Model 912Lhd , O Ring Part Noeea0013195 Model 912Lhd , Screw Part Noeea0008160 Model 912Lhd , Screw Part Noeea0008143 Model 912Lhd , Bearing Cap Part Noeea0013088 Model 912Lhd , Gear(38T) Part Noeea0013739 Model 912Lhd , Group-Control Valve Assyy. Part Noeea0022603 Model 912Lhd , Detent Spring Part Noeea0011562 Model 912Lhd , Detent Ball Part Noeea0005905 Model 912Lhd , Assy. -Control Valve Housing Part Noeea0022636 Model 912Lhd , Seal Oil Part Noeea0019381 Model 912Lhd , Retainer Ring Part Noeea0011634 Model 912Lhd , Oil Seal Washer Part Noeea0005990 Model 912Lhd , Fwd & Rev Valve Spool Part Noeea0019379 Model 912Lhd , Switch Part Noeea0013281 Model 912Lhd , Plug Part Noeea0021156 Model 912Lhd , Plug Part Noeea0013217 Model 912Lhd , Pipe Plug Part Noeea0005881 Model 912Lhd , Speed Sel Valve Spool & Plug Part Noeea0019380 Model 912Lhd , Plug Part Noeea0006012 Model 912Lhd , Washer Part Noeea0006013 Model 912Lhd , Screw Part Noeea0011557 Model 912Lhd , Spacer Part Noeea0006002 Model 912Lhd , Valve Spool Part Noeea0011581 Model 912Lhd , Spool Spring Part Noeea0011582 Model 912Lhd , Screw Part Noeea0014100 Model 912Lhd , Plug Part Noeea0013430 Model 912Lhd , Modulated Valve Assy. Part Noeea0008162 Model 912Lhd , O Ring Part Noeea0005912 Model 912Lhd , Accu. Spring Outer Part Noeea0008163 Model 912Lhd , Accu. Spring Inner Part Noeea0008164 Model 912Lhd , Regulator Spring Part Noeea0005914 Model 912Lhd , Gasket, Control Valve Part Noeea0014466 Model 912Lhd , Flange Part Noeea0005872 Model 912Lhd , O-Ring Part Noeea0013736 Model 912Lhd , Nut Part Noeea0013734 Model 912Lhd , Flange Part Noeea0013732 Model 912Lhd , O Ring Part Noeea0013065 Model 912Lhd , Washer Part Noeea0013064 Model 912Lhd , Nut Part Noeea0008140 Model 912Lhd , Seal-Kit For Transmission Part Noeea0023870 Model 912Lhd , Inner Seal Part Noeea0008092 Model 912Lhd , Piston Ring Part Noeea0008227 Model 912Lhd , Outer Clutch Piston Ring Part Noeea0005790 Model 912Lhd , Inner Clutch Piston Seal Part Noeea0005791 Model 912Lhd , Gasket, Cover Part Noeea0010918 Model 912Lhd , O-Ring Part Noeea0014464 Model 912Lhd , Gasket Part Noeea0008075 Model 912Lhd , Gasket Part Noeea0008057 Model 912Lhd , O-Ring Part Noeea0023036 Model 912Lhd , Oil Ring Part Noeea0014477 Model 912Lhd , O Ring Part Noeea0014481 Model 912Lhd , Seal-Oil Part Noeea0023055 Model 912Lhd , Gasket Part Noeea0012193 Model 912Lhd , Gasket Part Noeea0013279 Model 912Lhd , Gasket Part Noeea0023037 Model 912Lhd , Gasket Part Noeea0023039 Model 912Lhd , Gasket Part Noeea0023040 Model 912Lhd , Seal-Oil Part Noeea0023041 Model 912Lhd , Gasket Part Noeea0023051 Model 912Lhd , Gasket Part Noeea0023052 Model 912Lhd , Flange Output (6C) Part Noeea0033418 Model 912Lhd , O-Ring Part Noeea0033419 Model 912Lhd , Washer Part Noeea0033420 Model 912Lhd , Nut (Idler Shaft) Part Noeea0033421 Model 912Lhd , Transmission Mounting Bra Part No912c020000287 Model 912Lhd , Transmission Mounting Bra Part No912c020000288 Model 912Lhd , Nipple Part Nobp6fn32 Model 912Lhd , Rubber Guard-Trans. Part No912a050000242 Model 912Lhd , Dip Stick Part No912a050000080 Model 912Lhd , Pipe Part No912a020000298 Model 912Lhd , Hex Head Bolt Part No912a060000191 Model 912Lhd , Elbow,Std.90 Degree F/F Part Nobp6bl Model 912Lhd , Hex Head Bolt Part No912a060000192 Model 912Lhd , Flat Washer Part Nomaw08ga Model 912Lhd , Torque Converter (912B Mk-Ii) Part No912a050000159 Model 912Lhd , Pressure Regulatingvalve Group Part Noeea0013880 Model 912Lhd , Regulator Valve Assy Part Noeea0013820 Model 912Lhd , Valve Piston Part Noeea0013817 Model 912Lhd , Valve Spring , Inner Part Noeea0008247 Model 912Lhd , Valve Spring Part Noeea0013816 Model 912Lhd , Valve Stop Part Noeea0008243 Model 912Lhd , O Ring Part Noeea0005697 Model 912Lhd , Roll Pin Part Noeea0013815 Model 912Lhd , Safety Valve Seat Part Noeea0013819 Model 912Lhd , Valve Spring Part Noeea0008250 Model 912Lhd , Safety Valve Plunger Part Noeea0013198 Model 912Lhd , Gasket Part Noeea0013818 Model 912Lhd , O Ring, Suction Line Part Noeea0005712 Model 912Lhd , Plug(Not Shown) Part Noeea0013113 Model 912Lhd , Pipe Plug Part Noeea0005682 Model 912Lhd , Impeller To Cover ORing Part Noeea0005972 Model 912Lhd , Screw Part Noeea0013825 Model 912Lhd , Plug(Not Shown) Part Noeea0013118 Model 912Lhd , Bushing Part Noeea0013827 Model 912Lhd , O Ring (Not Shown) Part Noeea0013119 Model 912Lhd , Plug Part Noeea0013826 Model 912Lhd , Impeller Part Noeea0013862 Model 912Lhd , O-Ring Part Noeea0013863 Model 912Lhd , Hub Part Noeea0013864 Model 912Lhd , Bearing Part Noeea0013865 Model 912Lhd , Snap Ring Part Noeea0008265 Model 912Lhd , Spacer Part Noeea0011571 Model 912Lhd , Snap Ring Part Noeea0008268 Model 912Lhd , Retaining Ring Part Noeea0008269 Model 912Lhd , Turbine Hub Part Noeea0008270 Model 912Lhd , Screw Part Noeea0008272 Model 912Lhd , Cap Screw Part Noeea0019390 Model 912Lhd , Snap Ring Part Noeea0008275 Model 912Lhd , Bearing Part Noeea0008276 Model 912Lhd , Screw, Cover Part Noeea0010946 Model 912Lhd , Piston Ring Part Noeea0008278 Model 912Lhd , Sleeve Assy. Part Noeea0013842 Model 912Lhd , Lock Washer Part Noeea0008280 Model 912Lhd , Screw Part Noeea0008281 Model 912Lhd , Snap Ring Part Noeea0013829 Model 912Lhd , Bearing Part Noeea0008283 Model 912Lhd , Gear (28T) Part Noeea0013831 Model 912Lhd , Output Shaft Part Noeea0013832 Model 912Lhd , Ball Bearing Part Noeea0010850 Model 912Lhd , O Ring Part Noeea0013136 Model 912Lhd , Bearing Retainer Part Noeea0013834 Model 912Lhd , Washer Part Noeea0013735 Model 912Lhd , Oil Seal Part Noeea0013838 Model 912Lhd , Stud Part Noeea0013840 Model 912Lhd , Snap Ring Part Noeea0008050 Model 912Lhd , Gear (21T) Part Noeea0013841 Model 912Lhd , Ball Bearing Part Noeea0010887 Model 912Lhd , Piston Ring Part Noeea0008293 Model 912Lhd , Turbine Shaft Part Noeea0008294 Model 912Lhd , Hub Gear Part Noeea0013851 Model 912Lhd , Ring-Span Part Noeea0008296 Model 912Lhd , Charging Pump Sleeve Part Noeea0008297 Model 912Lhd , Gasket Part Noeea0013857 Model 912Lhd , Converter Charging Pump Part Noeea0008299 Model 912Lhd , Stud Part Noeea0013853 Model 912Lhd , Stud Nut Part Noeea0013069 Model 912Lhd , Gear (39T) Part Noeea0013844 Model 912Lhd , Bearing Part Noeea0013845 Model 912Lhd , Spacer Part Noeea0013846 Model 912Lhd , Bearing Part Noeea0013847 Model 912Lhd , Snap Ring Part Noeea0013848 Model 912Lhd , Drive Shaft Part Noeea0013849 Model 912Lhd , Snap Ring Part Noeea0008309 Model 912Lhd , Washer Part Noeea0013850 Model 912Lhd , Pump Adaptor Part Noeea0013858 Model 912Lhd , Stator Support Screw Part Noeea0005728 Model 912Lhd , Group Pump Adaptor Position -A Part Noeea0013887 Model 912Lhd , Pump Adaptor Part Noeea0013855 Model 912Lhd , Screw Part Noeea0013856 Model 912Lhd , Filter Assy. Part Noeea0008213 Model 912Lhd , Filter Element Assy. Part Noeea0023005 Model 912Lhd , Pump Drive Sleeve Snap Ring Assy. Part Noeea0023007 Model 912Lhd , Snap Ring Part Noeea0013814 Model 912Lhd , Seal Kit For Torque Converter Part Noeea0008320i Model 912Lhd , O-Ring Part Noeea0023009 Model 912Lhd , O-Ring Part Noeea0013833 Model 912Lhd , Oil Baffle Seal Part Noeea0008256 Model 912Lhd , Piston Ring Part Noeea0023019 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-55 Model 912Lhd , Engine Stud Part No912a060000210 Model 912Lhd , Hex Nut Part Nomt10lgg Model 912Lhd , Drive Line Assy.(Tc To Trans.) Part No912d050000162 Model 912Lhd , Propeller Shaft (Front) Part No912b050000339 Model 912Lhd , Spring Washer Part Now6gf Model 912Lhd , Hex Head Bolt Part Not6hg32 Model 912Lhd , Pillow Block Bearing Part No912a050000377 Model 912Lhd , Flat Washer Part Nomaw18ga Model 912Lhd , Spring Washer Part Nomdw18sa Model 912Lhd , Hex Head Bolt Part Nostdb035-18-65 Model 912Lhd , Propeller Shaft (Middle) Part No912b050000340 Model 912Lhd , Propeller Shaft (Rear) Part No912b050000341 Model 912Lhd , Front Axle Part No912b050000328 Model 912Lhd , Wheel Nut Part No912a060000204 Model 912Lhd , Axle Bolt Part No910a060000020 Model 912Lhd , Rear Axle Part No912b050000329 Model 912Lhd , Hex Head Bolt Part No912a060000212 Model 912Lhd , Bracket Part No912b020000803 Model 912Lhd , Clamp Half Part No912a020000334 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-55 Model 912Lhd , Hex Nut Part Nomt12lgg Model 912Lhd , Steering Wheel Part No912b070000278 Model 912Lhd , Steering Wheel(41741074A) Part No12wl23103032 Model 912Lhd , Bush, St. Wheel Part No912a060000190 Model 912Lhd , Pipe (Air Intake) Part No912a050000372 Model 912Lhd , T-Bolt Hose Clamp Part No19wl050001351 Model 912Lhd , Hex Head Bolt Part Nostdb035-08-25 Model 912Lhd , Exhaust Module Part No912b070000376 Model 912Lhd , Gasket Part Noeea0028557 Model 912Lhd , Flange Weldment Assy. Part No822b020000091 Model 912Lhd , Catalytic Converter Part No912b050000342 Model 912Lhd , Gasket Part Noeea0033695 Model 912Lhd , Expansion Bellow Assy Part No912b020000849 Model 912Lhd , Flexible Bellow Part No912a050000343 Model 912Lhd , Exhaust Pipe Part No912b050000344 Model 912Lhd , V-Flange Part No822b020000099 Model 912Lhd , Pipe Part No912a050000347 Model 912Lhd , Flange Slotted Part Noeea0033697 Model 912Lhd , Bracket Part No912b020000850 Model 912Lhd , Clamp Part No912b020000419 Model 912Lhd , Flat Washer Part Now5ga Model 912Lhd , Spring Washer. Part Now7gf Model 912Lhd , Hex Head Bolt Part Not7gg20 Model 912Lhd , Heat Insulation Jacket Kit Part No912a050000380 Model 912Lhd , Exhaust Clamp Part No912a050000391 Model 912Lhd , Cooler Group Part No912b070000390 Model 912Lhd , Cooler (Radiator+Cac) Part No912b050000365 Model 912Lhd , Cable Reel Motor Part No611b050000320 Model 912Lhd , Shaft Seal Part Noeea0034480 Model 912Lhd , Spring Washer Part Now8gf Model 912Lhd , Hex Head Bolt Part Not8vg24 Model 912Lhd , Hex Nut Part Not8vg Model 912Lhd , Fan (Radiator+Cac) Part No912b050000363 Model 912Lhd , Hex Head Bolt Part Not4vg20 Model 912Lhd , Spring Washer Part Now4gf Model 912Lhd , Cooler Bracket Part No912b020000840 Model 912Lhd , Bracket Assy Part No912a020000901 Model 912Lhd , Rubber Sheet Part No912a050000373 Model 912Lhd , Pipe ( Cac In) Part No912a050000350 Model 912Lhd , Pipe ( Cac In) Part No912a050000351 Model 912Lhd , Silicon Hose (Cac) Part No912a050000355 Model 912Lhd , T-Bolt Hose Clamp Part No19wl050001411 Model 912Lhd , Pipe ( Cac Out) Part No912a050000352 Model 912Lhd , Silicon Hose (Cac) Part No912a050000369 Model 912Lhd , T-Bolt Hose Clamp Part No907a050000032 Model 912Lhd , Pipe ( Radiator In) Part No912a050000354 Model 912Lhd , Pipe ( Radiator Out) Part No912a050000353 Model 912Lhd , Silicon Hose (Radiator) Part No912a050000370 Model 912Lhd , Hex Head Bolt Part Nostdb035-08-20 Model 912Lhd , Hose Part No19wl050001405 Model 912Lhd , Hose Clip Part Nop8phb Model 912Lhd , Coolant Hose Part Noeea0027287/001 Model 912Lhd , Coolant Hose Part Noeea0027286 Model 912Lhd , Coolant Hose Part Noeea0027287/002 Model 912Lhd , Fuel Hose Clip Part No12wl050000143 Model 912Lhd , Cooler (Hoc+Toc) Part No912b050000366 Model 912Lhd , Fan (Hoc+Toc) Part No912b050000364 Model 912Lhd , Flat Washer Part Nomaw12gag Model 912Lhd , U-Clamp Part No912a020000902 Model 912Lhd , Hex Nut Part No369-0106 Model 912Lhd , Cooler Guard Assy Part No912b070000391 Model 912Lhd , Cooler Guard Fab. Part No912b020000846 Model 912Lhd , Threaded Boss Part No811a060000056 Model 912Lhd , Hex Head Bolt Part Nostdb035-16-40 Model 912Lhd , Flat Washer Part Nomaw16ga Model 912Lhd , Hex Head Bolt Part Nostdb035-12-70 Model 912Lhd , Motor Guard Part No912a020000861 Model 912Lhd , Hex Head Bolt Part Nostdb035-08-40 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-40 Model 912Lhd , Hydraulic Group (Front Tip) Part No912m100000366 Model 912Lhd , Transmission Hyd. Group Part No912c070000229 Model 912Lhd , O Ring Part Nos3306 Model 912Lhd , O Ring Part Nos3312 Model 912Lhd , O Ring Part Nos3316 Model 912Lhd , Swivel Nut Elbow Part Novu10f10e21bs Model 912Lhd , Swivel Nut Elbow Part Novu16f16e21bs Model 912Lhd , Straight Adaptor Part Novu6f6e16as Model 912Lhd , St. Adaptor Part Novu10f8e16as Model 912Lhd , St. Adaptor Part Novu12f12e16as Model 912Lhd , Adaptor Part Novu16f16e16as Model 912Lhd , Adaptor Part Novu16f16e02as Model 912Lhd , Hose Assy. Part Nostdd026/100 Model 912Lhd , Hose Assy. Part Nostdd026/108 Model 912Lhd , Hose Assy. Part Nostdd026/169 Model 912Lhd , Hose Assy. Part Nostdd026/173 Model 912Lhd , Hose Assy. Part Nostdd026/175 Model 912Lhd , Hose Assy. Part Nostdd026/242 Model 912Lhd , Hose Assy. Part Nostdd026/309 Model 912Lhd , Special Fitting Part Noeea0026099 Model 912Lhd , Hyd Fitting Part Novw16fb20 Model 912Lhd , Hex Socket Plug Part Nop1fpc Model 912Lhd , Trans. Control Valve Assy. Part No912b070000230 Model 912Lhd , Control Valve Assy. Part Noeea0014810 Model 912Lhd , Control Valve Mtg.Bracket Part No912b020000571 Model 912Lhd , Lever-Lh,Control Valve Assy. Part No912a020000572 Model 912Lhd , Lever-Rh,Control Valve Assy. Part No912a020000573 Model 912Lhd , Link Part No912a020000564 Model 912Lhd , Link Part No912a020000565 Model 912Lhd , Link (5/16) Part No912a060000174 Model 912Lhd , Pin Part No912a060000197 Model 912Lhd , Bushing Part Nogla12j Model 912Lhd , Pin Part Nohra4 Model 912Lhd , Pin Part Nohra3 Model 912Lhd , Cotter Pin Part Nol101 Model 912Lhd , Hex Head Bolt Part Not6gg12 Model 912Lhd , Flat Washer Part Now12g Model 912Lhd , Cotter Pin Part Nol110 Model 912Lhd , Hex Nut Part Not5hg Model 912Lhd , Handle Part No912a020000649 Model 912Lhd , Hex Socket Csk Head Screw Part No370-3037 Model 912Lhd , Tee Part Novu10f10e01ds Model 912Lhd , Straight Adaptor Part Nose024/429 Model 912Lhd , Special Elbow Part No912a020000477 Model 912Lhd , Adaptor Part Novu12f16e02as Model 912Lhd , Adaptor Part Novu12f16e16as Model 912Lhd , Valve Mounting Bracket Part No912a020000319 Model 912Lhd , Reducer(Bsp-Npt),M/M Part Nosc089/056 Model 912Lhd , Elbow 45 Deg. Part Novu12f12e21cs Model 912Lhd , Tee Assy. Part No912a020000617 Model 912Lhd , Union Tee Part Novu12f12e01ds Model 912Lhd , Tee Part Nop1rt Model 912Lhd , Filter Element Assembly. Part Noeea0008221 Model 912Lhd , Hex Head Bolt Part Not6gg20 Model 912Lhd , St. Adaptor Part Novu10f8e02as Model 912Lhd , Elbow, 90 Degree M/F Part Nose012/022 Model 912Lhd , Hose Assembly Part No623d02584/319 Model 912Lhd , Hose Assy. Part Nostdd026/104 Model 912Lhd , Swivel Nut Branch Tee Part Novu6f6e33ds Model 912Lhd , Straight Adaptor Part Nose024/427 Model 912Lhd , Fitting Part Novu6f2e03bs Model 912Lhd , Adaptor Part Nodta001062-012 Model 912Lhd , Hose Assy. Part Nostdd026/089 Model 912Lhd , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/042 Model 912Lhd , O Ring Part Nos2803 Model 912Lhd , Adaptor Metric/Jic Part Noeea0026098 Model 912Lhd , Service Hyd.Group(Front Tip) Part No912m100000257 Model 912Lhd , Bonded Seal Part Nosc011/016 Model 912Lhd , Bonded Seal Part Nosc011/024 Model 912Lhd , Bonded Seal Part Nosc011/009 Model 912Lhd , Fitting Part Novu6f4e02as Model 912Lhd , Straight Adaptor Part Novu10f10e01as Model 912Lhd , Straight Adaptor Part Nose024/206 Model 912Lhd , Hose Assy. Part Nostdd026/101 Model 912Lhd , Hose Assy. Part Nostdd026/114 Model 912Lhd , Hose Assembly Part No623d02584/283 Model 912Lhd , Hose Assy. Part Nostdd026/310 Model 912Lhd , Hose Assy. Part Nostdd026/319 Model 912Lhd , Hose Assy. Part Nostdd033/037 Model 912Lhd , Hose Assy. Part Nostdd026/240 Model 912Lhd , Hose Clip Part Nop105phb Model 912Lhd , Elbow, Street 90 Degree M/F Part Nobp7blb Model 912Lhd , Stand Pipe Part No625a060000092 Model 912Lhd , Special Elbow Part No912a020000315 Model 912Lhd , Stand Pipe (1 1/4 Bspt) Part No621a000000202 Model 912Lhd , Gauge Adaptor Part No811a060000088 Model 912Lhd , Elbow,Std.90 Degree F/F Part Nobp7bl Model 912Lhd , Standpipe Part No625a000001003 Model 912Lhd , Hose Part No623a01515/006 Model 912Lhd , Hyd.Hose (44 Mm) Part Noeea0009445 Model 912Lhd , Hose Clamp Part Nop10phb Model 912Lhd , Nipple Part Nobp7fna Model 912Lhd , Special Elbow Part Noeea0009295 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/002 Model 912Lhd , Hose Assy. Part Nostdd026/306 Model 912Lhd , Hex Head Bolt Part Nostdb035-06-16 Model 912Lhd , Spring Washer Part Nomdw06sa Model 912Lhd , Elbow Part Nose024/232 Model 912Lhd , Hydraulic Pump (Service) Part No912b050000385 Model 912Lhd , Gasket Part No912a050000230 Model 912Lhd , Pressure Filter Part No811a050000182 Model 912Lhd , Filter Element Part Noeea0018438 Model 912Lhd , Service Valve Part No912b050000238 Model 912Lhd , Pilot Vavle Part No912b050000216 Model 912Lhd , Filter Mounting Bracket Part No917a020000087 Model 912Lhd , Hex Head Bolt Part Not8gg24 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/008 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/009 Model 912Lhd , Bonded Seal Part Nosc011/026 Model 912Lhd , Hose Sleeve Part Noeea0023531 Model 912Lhd , Hose Clamp Part Noeea0018063 Model 912Lhd , Bonded Seal Part Nosc011/033 Model 912Lhd , Hex Bushing Part Nop98 Model 912Lhd , Straight Adaptor, M/M Part Nose012/088 Model 912Lhd , Plug For Qrc Part No625a060000008 Model 912Lhd , Quick Release Coupling Part No625a050000011 Model 912Lhd , Bspp Socket Part No625a050000106 Model 912Lhd , Elbow, 90 Degree M/F Part Nose012/026 Model 912Lhd , Straight Adaptor, M/M Part Nose012/085 Model 912Lhd , Hydraulic Hand Pump Part No611b050000326 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-30 Model 912Lhd , Hex Nut Part No369-0110B Model 912Lhd , Relief Valve Assy. Part No625b050000064 Model 912Lhd , Relief Cartridge Part Noeea0008997 Model 912Lhd , Seal Kit-Relief Valve,(*)Marked Items Part Noeea0009001 Model 912Lhd , Hyd.Hose (51 Mm) Part No625a050000113 Model 912Lhd , Return Line Filter Part Nosc100500205 Model 912Lhd , Filter Element Part Noeea0033330 Model 912Lhd , Straight Adaptor Part Nose024/213 Model 912Lhd , Straight Adaptor Part Nose024/209 Model 912Lhd , Straight Adaptor Part Nose024/219 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/006 Model 912Lhd , St. Adaptor Part Nose024/210 Model 912Lhd , St.Swivel Adaptor M/F Part Nose012/063 Model 912Lhd , Port Block Part No625c000000836 Model 912Lhd , Port Block Part Noeea0009305 Model 912Lhd , Straight Adaptor, M/M Part Nose012/106B Model 912Lhd , Hose Assembly Part No623d02584/703 Model 912Lhd , Hose Assly Part No623d02584/708 Model 912Lhd , Reducer, M/M Part Nose012/101 Model 912Lhd , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/048 Model 912Lhd , Hose Assy. Part Nostdd026/266 Model 912Lhd , Tee M/M/M Part Nose012/137 Model 912Lhd , Straight Adaptor Part Nose024/212 Model 912Lhd , Elbow, 90 Degree M/F Part Nose012/028 Model 912Lhd , Reducer, M/M Part Nose012/098 Model 912Lhd , Hose Assembly Part No623d02584/754 Model 912Lhd , Stand Pipe Part No803a000000337 Model 912Lhd , Stud(M8) Part No250a050000021 Model 912Lhd , Reducer, M/M Part Nose012/099 Model 912Lhd , Brake Hyd. Group Part No912b070000262 Model 912Lhd , Straight Adaptor Part Novu8f6e16as Model 912Lhd , Hose Assy. Part Nostdd026/039 Model 912Lhd , Adaptor Part Novu8f8e21cs Model 912Lhd , Hose Assy. Part Nostdd026/047 Model 912Lhd , Hose Assy. Part Nostdd026/051 Model 912Lhd , O Ring Part Nos3304 Model 912Lhd , Straight Adaptor (Unf To Bsp) Part Nose015/303 Model 912Lhd , Tee M/M/M Part Nose012/133 Model 912Lhd , Union Tee Part Novu6f6e01ds Model 912Lhd , Straight Adaptor (Long) Part Novu8f6e22as Model 912Lhd , Hose Assy. Part Nostdd026/283 Model 912Lhd , Tee Piece Assy. Part No813m000000226 Model 912Lhd , Tee M/M/M Part Nose012/131 Model 912Lhd , Hose Assembly Part No623d02584/289 Model 912Lhd , St.Swivel Adaptor M/F Part Nose012/062 Model 912Lhd , Straight Adaptor Part Nose024/222 Model 912Lhd , Hose Assembly Part No623d02584/333 Model 912Lhd , Hose Assy. Part Nostdd026/325 Model 912Lhd , Hose Assembly Part No623d02584/306 Model 912Lhd , Hose Assy. Part Nostdd026/315 Model 912Lhd , 3/2 Way Valve Part No19wl050000655 Model 912Lhd , Piston Accumulator(2 Ltr.) Part No912a050000241 Model 912Lhd , Seal Kit For Piston Accumulator Part Noeea0022044 Model 912Lhd , Sealing Ring Part Noeea0022384 Model 912Lhd , 3 Way Dcv Part No811a050000158 Model 912Lhd , Brake Valve Part No912b050000362 Model 912Lhd , Repair Kit, Brake Valve Part Noeea0025375 Model 912Lhd , Elbow, 135 Degree M/F Part Nose012/002 Model 912Lhd , Hex Head Bolt Part Nostdb035-06-35 Model 912Lhd , Flat Washer Part Nomaw06ga Model 912Lhd , Hose Assy. Part Nostdd026/014 Model 912Lhd , Pressure Reducing Valve Part No611a050000004 Model 912Lhd , Hex Head Bolt Part Nostdb035-10-40 Model 912Lhd , Plug Adaptor Part No109793 Model 912Lhd , Plug Adaptor Part No110516 Model 912Lhd , Hose Assembly Part No623d02584/104 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/004 Model 912Lhd , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/044 Model 912Lhd , Straight Adaptor, M/M Part Nose012/084 Model 912Lhd , Hex Head Bolt Part Not8gg16 Model 912Lhd , Threaded Boss Part No625a060000044 Model 912Lhd , Bracket, Pr Valve Part No625b020000362 Model 912Lhd , Reducer, M/M Part Nose012/094 Model 912Lhd , Straight Connector Part Novu6f8e16as Model 912Lhd , Flow Control Valve Part Norb2c050000101 Model 912Lhd , Manifold Block Part No917b060000025 Model 912Lhd , Hyd Fitting Part Novu8f8e16as Model 912Lhd , O Ring Part Nos3308 Model 912Lhd , Hex Socket Head Cap Screw Part No370-2338 Model 912Lhd , Adapter Swivel Part Nose024/428 Model 912Lhd , Hose Assy. Part Nostdd026/179 Model 912Lhd , Straight Adaptor M/M Part Nose024/207 Model 912Lhd , Hose Assembly Part No623d02584/315 Model 912Lhd , Hose Assembly Part No623d02584/033 Model 912Lhd , Hose Assy. Part Nostdd026/025 Model 912Lhd , Hose Assy. Part Nostdd026/065 Model 912Lhd , Hose Assy. Part Nostdd026/031 Model 912Lhd , Pres.Gauge Isolator Valve Part No811a050000013 Model 912Lhd , Bracket, Acc. Charge Vlv Part No912a020000652 Model 912Lhd , Oil Pressure Gauge Part No813b000000185 Model 912Lhd , Hex Head Bolt Part Nostdb035-12-30 Model 912Lhd , Clamp Part No912b020000628 Model 912Lhd , Hose Assy. Part Nostdd026/034 Model 912Lhd , Swivel Tee, 3/4 Part Novu8f8e26ds Model 912Lhd , Straight Adaptor Part Nose024/202 Model 912Lhd , Steering Hyd. Group Part No912m100000259 Model 912Lhd , Stand Pipe Part No623a000001490 Model 912Lhd , Hyd.Hose Part No625a00554/004 Model 912Lhd , Hyd.Hose (32 Mm) Part Noeea0009494 Model 912Lhd , Swivel Elbow,90 Deg. Part Novu12f12e21bs Model 912Lhd , St. Adaptor Part Novu10f12e02as Model 912Lhd , Straight Adaptor Part Nose024/221 Model 912Lhd , Straight Adaptor Part Nose024/208 Model 912Lhd , Special Elbow Part Noeea0009299 Model 912Lhd , Adaptor Part Novu12f12e33ds Model 912Lhd , St. Adaptor Part Novu12f12e02as Model 912Lhd , Straight Adaptor Part Novu12f8e16as Model 912Lhd , Hex Head Bolt Part Not6gg24 Model 912Lhd , Reducer, M/M Part Nose012/095 Model 912Lhd , Straight Adaptor Part Nose024/430 Model 912Lhd , Straight Adaptor Part Nose024/282 Model 912Lhd , Hose Assy. Part Nostdd026/130 Model 912Lhd , Hose Assy. Part Nostdd026/110 Model 912Lhd , Hose Assy. Part Nostdd026/172 Model 912Lhd , Gasket Part No912a050000229 Model 912Lhd , Accumulator Charge Valve Part No912b050000245 Model 912Lhd , Repair Kit Part Noeea0018821 Model 912Lhd , Hydraulic Pump (Str. & Br Part No912b050000069 Model 912Lhd , Orbitrol Steering Valve Part No912a050000384 Model 912Lhd , Steering Column Part No912b050000277 Model 912Lhd , Accumulator (4-Ltr) Part No811a050000191 Model 912Lhd , Seal Kit For (*) Marked Items Part Noeea0019109 Model 912Lhd , O-Ring Part Noeea0022385 Model 912Lhd , Elbow Part No912a050000021 Model 912Lhd , Clamp Part Noeea0019155 Model 912Lhd , Elbow, Street 90 Degree M/F Part Nobp6blb Model 912Lhd , Straight Adaptor Part Nose024/201 Model 912Lhd , Hose Assy Part Nostdd026/073 Model 912Lhd , Swivel Nut Elbow Part Novu6f6e21bs Model 912Lhd , Hex Head Bolt Part Nostdb035-08-100 Model 912Lhd , Hex Nut, Nyloc Part Nomt12ln Model 912Lhd , Bonded Seal Part Nosc011/013 Model 912Lhd , Hex Head Plug (Bsp) Part Nosc036/003 Model 912Lhd , Straight Adaptor Part Nose024/211 Model 912Lhd , Hex Head Bolt Part Not8gg20 Model 912Lhd , Bonded Seal Part Nosc011/006 Model 912Lhd , Straight Adaptor, M/M Part Nose012/082 Model 912Lhd , Reducer, M/M Part Nose012/093 Model 912Lhd , Hose Assembly Part No623d02584/309 Model 912Lhd , St.Swivel Adst.Swivel Adaptor F/F Part Nose012/046 Model 912Lhd , Manifold Block Part No910a050000021 Model 912Lhd , Manifold Block Part Noeea0031939 Model 912Lhd , Solenoid Cartridge Part Noeea0030276 Model 912Lhd , Check Cartridge Part Noeea0030277 Model 912Lhd , Straight Adaptor Part Novu6f12e16as Model 912Lhd , Straight Adaptor Part Nose024/218 Model 912Lhd , Elbow 90 Degree Part Novu8f8e21bs Model 912Lhd , Hose Assy. Part Nostdd026/112 Model 912Lhd , Hose Assy. Part Nostdd026/092 Model 912Lhd , Straight Adaptor Part Nose024/203 Model 912Lhd , Check Valve Part No77728871 Model 912Lhd , Check Valve Part No625a050000111 Model 912Lhd , Swivel Nut Elbow Part Novu16f16e21cs Model 912Lhd , Hyd. Cooler Group Part No912c070000280 Model 912Lhd , Hyd. Pump Part No912b050000358 Model 912Lhd , Gasket Part No907a050000047 Model 912Lhd , Straight Adaptor, M/M Part Nose012/087 Model 912Lhd , Hose Assembly Part No623d02584/400 Model 912Lhd , Reducer, M/M Part Nose012/097 Model 912Lhd , Bonded Seal Part Nosc011/019 Model 912Lhd , Hose Assembly Part No623d02584/175 Model 912Lhd , Hose Assy. Part Nostdd033/041 Model 912Lhd , Hose Assy. Part Nostdd026/314 Model 912Lhd , Elbow, 90 Degree M/F Part Nose012/023 Model 912Lhd , Hose Assy. Part Nostdd026/321 Model 912Lhd , Tee M/M/M Part Nose012/132 Model 912Lhd , Straight Adaptor, M/M Part Nose012/083 Model 912Lhd , Hose Assy. Part Nostdd026/326 Model 912Lhd , Bushing Part Nobp7bb6 Model 912Lhd , Elbow Street, 45 Degree M/F Part Nobp7blc Model 912Lhd , Nipple Part Nobp7fn32 Model 912Lhd , Straight Adaptor, M/M Part Nose012/086 Model 912Lhd , Electric Group Part No912a040000218 Model 912Lhd , 7 Display Part No910b040000044 Model 912Lhd , Connector Kit(Pv780) Part No910a040000045 Model 912Lhd , Starting Switch Part No19wl040000073 Model 912Lhd , Emergency Stop Control Station Part Noeea0028455 Model 912Lhd , Emergency Stop Marker Part Noeea0029991 Model 912Lhd , Emergency Stop Push Button Part Noeea0022291 Model 912Lhd , Timer Part Noeea0020754 Model 912Lhd , Relay Module Part Noepra040000007 Model 912Lhd , Buzzer 24V Dc Part No19wl040000084 Model 912Lhd , Cable End Sleeve Terminal(2.5 Sq.Mm) Part Noeea0030029 Model 912Lhd , Cable End Sleeve Terminal(1.5 Sq.Mm) Part Noeea0030028 Model 912Lhd , Cable End Sleeve Terminal(6 Sq.Mm) Part Noeea0030117 Model 912Lhd , Selector Switch Part Noepra040000001 Model 912Lhd , Selector Switch (3 Pos.) Part No910a040000014 Model 912Lhd , Mecan1905 Part No907b040000001 Model 912Lhd , Push Button - 3 Position Part No116602 Model 912Lhd , Duel Head Lamp Relay(24V) Part Noeea0030031 Model 912Lhd , Led Work Light,45W,Low Beam Part No917a040000021 Model 912Lhd , Led Work Light,45W,Wide Flood Part No917a040000022 Model 912Lhd , Led Beacon Part No917a040000024 Model 912Lhd , Led Flashing Light(Amber) Part No917a040000023 Model 912Lhd , Led Tail Light Part No907a040000018 Model 912Lhd , Led Work Light(15W) Part Nossla040000019 Model 912Lhd , Paired Horn Part No919a002910934 Model 912Lhd , Circuit Breaker, 32A Part Noeea0024825 Model 912Lhd , Circuit Breaker, 6A Part No19wl871050265 Model 912Lhd , Circuit Breaker,10A Part No19wl871050023 Model 912Lhd , Circuit Breaker, 16A Part Noeea0025390 Model 912Lhd , Hyd. Oil Temp Sensor Part No917a040000006 Model 912Lhd , Capacitance Oil Level Switch Part No917a040000026 Model 912Lhd , Multicore Control Cable(2X1.5) Part No907a040000024 Model 912Lhd , Multicore Control Cable(4X1.5) Part No907a040000025 Model 912Lhd , Multicore Control Cable(7X2.5) Part No907a040000022 Model 912Lhd , Multicore Control Cable(18X2.5) Part No907a040000023 Model 912Lhd , Multicore Control Cable For Rc Part No912a040000157 Model 912Lhd , Can Bus Cable Part No907a040000012 Model 912Lhd , Solenoid Connector(Led) Part Noeea0029713 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Pink Part Noeea0025274 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Blue Part Noeea0025275 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Yellow Part Noeea0025276 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Green Part Noeea0025277 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Violet Part Noeea0025278 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Red Part Noeea0025279 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Grey Part Noeea0025280 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, White Part Noeea0025281 Model 912Lhd , Flexible Wire, 1.5 Sq.Mm, Black Part Noeea0025282 Model 912Lhd , Flexible Wire, 2.5 Sq.Mm, Red Part Noeea0025283 Model 912Lhd , Flexible Wire, 6 Sq.Mm, Red Part Noeea0025285 Model 912Lhd , Multi-Level Terminal Part Noeea0029579 Model 912Lhd , Terminal Block(Black) Part Noeea0029389 Model 912Lhd , Terminal End Plate Part Noeea0022455 Model 912Lhd , End Clamps Part Noeea0021276 Model 912Lhd , Terminal Block Part Noeea0028566 Model 912Lhd , Terminal Block(Kut10,Yellow) Part Noeea0029453 Model 912Lhd , Terminal Block(Kut10,Green) Part Noeea0029454 Model 912Lhd , End Plate Part Noeea0028567 Model 912Lhd , Mounting Din Rail Part Noeea0022456 Model 912Lhd , Pressure Switch Part No103483 Model 912Lhd , Reversing Alarm Part Noeea0022223 Model 912Lhd , Interior Light Part No910a040000029 Model 912Lhd , Multicore Control Cable(14X1.5) Part No910a040000043 Model 912Lhd , Flashing Led,Red Part No912a040000216 Model 912Lhd , Contact Block(No) Part Noeea0027986 Model 912Lhd , Contact Block(Nc) Part Noeea0027987 Model 912Lhd , On Delay Timer (Crouzet) Part No910a040000059 Model 912Lhd , Tyre Assy (12X24, Tl) Part No912b070000389 Model 912Lhd , Wheel Rim (M/C) Part No912b020000834 Model 912Lhd , Tyre (12X24), Tl Part No912b050000360 Model 912Lhd , Valve Assy (Tl) Part No912b050000367 Model 912Lhd , Cover & Guard Group Part No912b070000397 Model 912Lhd , Support Bracket Part No912a020000874 Model 912Lhd , Hex Head Bolt Part Nostdb035-20-60 Model 912Lhd , Hex Nut Part No369-0120 Model 912Lhd , Bracket Assy Part No912a020000883 Model 912Lhd , Plate Assy Part No912a020000890 Model 912Lhd , Cover Assy Part No912a020000862 Model 912Lhd , Spring Washer Part Nomdw12sa Model 912Lhd , Flat Washer Part Nomaw10gag Model 912Lhd , Hex Head Bolt Part Nostdb035-10-20 Model 912Lhd , Decal, Transmission Oil Part No912a050000297 Model 912Lhd , Pressure Checking Unit Part No150a050000036 Model 912Lhd , Air Nozzle Part No912a050000147 Model 912Lhd , Misc. Group Part No912a070000399 Model 912Lhd , Fire Extinguisher Part No625a050000110 Model 912Lhd , Drive Screw Part Not1000 Model 912Lhd , Trans. Oil Part No00ea000001198 Model 912Lhd , Hydraulic Oil Part Nod10a050000093 Model 912Lhd , Gear Oil(Axle&Transfer Case) Part No115575 Model 912Lhd , Engine Coolant Part No912a050000375 Model 912Lhd , Engine Oil Part No912a050000376 Model 912Lhd , Centralised Lubrication System (Automatic) Part No917b050000022 Model 912Lhd , Automatic Fire Suprression System Part No907a070000027 Model 912Lhd , Automatic Fire Detection & Supression System Part No19wl050000868 Model 912Lhd , Bracket (Fire System) Part No19wl020000733 Model 912Lhd , Threaded Boss Part No811a020000105 Model 912Lhd , Hex Head Screw Part Nomt08lg16g Model 912Lhd , Spring Washer Part Nomdw08sag Model 912Lhd , Hex Nut Part Nomt08lgg Model 912Lhd , Accumulator Charging Kit Part No811a050000124 Model 912Lhd , Electrical Tools Part No907a050000049 Model 912Lhd , Single Core Wire Rubber Bidding Part Nod06a050000189 Model 912Lhd , Logo-Eimco Elecon(Engine Hood) Part No12wl050000047 Model 912Lhd , Fastner Sealant Part No00ea000001155 Model 912Lhd , Hand Pump Part No917a050000106 Model 912Lhd , E.M Tyre Inflating & Checking Device Lb Part No907a050000064 Model 912Lhd , O Ring Kit Part No917a050000113 Model 912Lhd , Wheel Chock Part No822b050000102 Model 912Lhd , Water In Fuel Sensor Part Noeea0035123 Model 912Lhd , Low Fuel Pressure Sensor Part Noeea0035124 Model 912Lhd , Fuel Supply Pump Part Noeea0035125 Model 912Lhd , Common Rail Repair Kit Part Noeea0035126 Model 912Lhd , Boost Pressure Sensor Part Noeea0035127 Model 912Lhd , Control Unit (Ecu) Part Noeea0035128 Model 912Lhd , Temprature Sensor Part Noeea0035129 Model 912Lhd , Starter Motor Part Noeea0035130 Model 912Lhd , Alternator Part Noeea0035131 Model 912Lhd , Colant Level Switch Part Noeea0035132 Model 912Lhd , Accelerator Pedal Part Noeea0035133 Model 912Lhd , Cranck Shaft Sensor/Cam Shaft Sensor Part Noeea0035134 Model 912Lhd , Oil Pressure Sensor Part Noeea0035135 Model 912Lhd , V-Ribbed Belt Part Noeea0035137 Model 912Lhd , Turbocharger Oil Return Gasket Part Noeea0035140 Model 912Lhd , Turbocharger Gasket Part Noeea0035141 Model 912Lhd , Coupling Part Noeea0034760 Model 912Lhd , Spin-On Oil Filter Part Noeea0030669 Model 912Lhd , Pre Fuel Filter Part Noeea0030670 Model 912Lhd , Spin-On Fuel Filt. Part Noeea0030671 Model 912Lhd , Air Filter Outer Part Noeea0030675 Model 912Lhd , Air Filter Inner Part Noeea0030676 Model 912Lhd , Suction Strainer (40 Mesh) Part No625b050000122 Model 912Lhd , Axle Oil Part No12wl050000144 Model 912Lhd , Belt Tensioner Part Noeea0035138 Model 912Lhd , Turbocharger Part Noeea0035139 Model 912Lhd , Plate Intermediate Part Noeea0005576 Model 912Lhd , Drive Shaft Part Noeea0005555 Model 912Lhd , Axle Bolt Part No912a060000124 Model 912Lhd , Axle Bolt Part No811a060000121 Model 912Lhd , Axle Bolt Part No912a060000140 Model 912Lhd , Pinion Nut Part Noeea0012870 Model 912Lhd , Pilot Bearing Part Noeea0005605 Model 912Lhd , Bearing Set Part Noeea0010499 Model 912Lhd , D/L Assy Part No912b050000205 Model 912Lhd , Wheel Stud Part Noeea0013320 Model 912Lhd , Wheel Nut Part Noeea0005573 Model 912Lhd , Link Assy Part No912m100000250 Model 912Lhd , Pilot Valve Part No912b050000098 Model 912Lhd , Spider Assy Part No811m100000417 Model 912Lhd , High Block Spider Assy Part No912m100000348 Model 912Lhd , Service Brake Cylinder Assy Part Noeea0013682 Model 912Lhd , Tank Relief Cartridge Part No613m000001081 Model 912Lhd , Bearing Set Part Noeea0010500 Model 912Lhd , Oil Seal Part Noeea0005558 Model 912Lhd , Oil Seal Part Noeea0005584 Model 912Lhd , Middle Plate Part Noeea0005577 Model 912Lhd , Spiral Beval Wheel Part Noeea0005590 Model 912Lhd , Drive Line Assy Part No912m100000365 Model 912Lhd , Drive Line Assy Part No912b050000218 Model 912Lhd , Coolant Pump Part Noeea0035136 Model 912Lhd , Combination Air Filter Part Noeea0035424 Model 912Lhd , Gasket For Exhaust Manifold Part Noeea0035849c Model 912Lhd , Connecting Line (Engine-Ecu Harness) Part Noeea0035854c Model 912Lhd , Valve Mechan.Cover Part Noeea0035831c Model 912Lhd , Gasket For Tappet Cover Part Noeea0035828c Model 912Lhd , Screw/Bolt For Tappet Cover Part Noeea0035829c Model 912Lhd , Gasketfor Breathing Line In Tappet Cover Part Noeea0035830c Model 912Lhd , Pipe Clamp Part Noeea0035790c Model 912Lhd , Intake Pipe Part Noeea0035791c Model 912Lhd , Spring Band Clamp Part Noeea0035792c Model 912Lhd , Pre Fuel Filter Part Noeea0026786 Model 912Lhd
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Jharkhand View Result →
Jammu and Kashmir View Result →
4.
Defence #9842019 Technical Bid
Tender For Term Contract (Tc) For Repair/Maintenance Of Sentinel House Of Hq Igar(N) At Kohima; Builders Hardware & Joinary Items (Doors, Windows, Latches, Mortice Locks) 1. PVC,UPVC Door Window and Chowkhats Rajshri Plastiwood, Fenesta, Encraft, Supreme, Duroplast, H2O, Crown Industries 2. FRP Doors Syntex, Jain Wood Industries (Jayna), Delux Poly Fab 3. Factory made Wooden Panelled Flush Doors and Windows Kitply, Ambika Timber Woods, Premier Wood Crafts, Jain Wood Industries (Jayna) 4. Steel Roller Door/Shutters Dura Roof, Swastik Rolling, Metal King, Gandhi Automation Pvt Ltd, Decogrile, Wellroll 5. L-Drop, Latches, Hasp, Staples Dorset, Godrej, Kich,Ozone, Crown 6. Aluminum Anodised Powder Coated Doors,Windows,Frames,Partition Jindal, Kalco, Alpure, Crown, Hindalco 7. Float/Reflective Glass Saint Gobain, ASAHI, Modi Guard 8. Aluminium/Zinc Composite Panels Alcobond, Reynobond, Alcomax, Durabuild All Types of Plywoods, Veeners, Laminates, False Ceiling, Wooden Board Sheets, Wooden Floors 1. PVC False Ceiling Syntex, Armstrong, Duroplast, Rajshri Plastiwood, H2O 2. Gypsum Silicate Tiles in False Ceiling/Wall Lining Armstrong, Everest, India Gypsum, Aerolite, Hilux, Gyproc, Ramco Industries 3. Mineral fibre False Ceiling Gyproc, Armstrong, Llyod Insulation, Kingston, Aerostone 4. Plywood, Pre Laminate Plywood,Veenered Decorative Plywood,Fire Retardant Plywood Greenply, Kitply, Duratuff, Ecoboard, Decoboard 5. Veenered Plain Particle Board Greenply, Kitply, Duratuff, Ecoboard, Decoboard Sanitary Fittings and Fixtures 1. Wash Basins/EWCs/IWCs/Urinals ( Vitreous China) Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 2. Concealed Cisterns Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 3. Normal/Dual Flow Flushing Cisterns Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd,Somany, Duravit, Roca, Coronet 4. PVC/Acrylic Toilet Mirror Cabinet Saint Gobain, ASAHI, Modi Guard, Coronet 5. Chromium Platet Towel Ring,Towel Rack,Towel Rail,Soap Nitch, Tissue paper Holder Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca 6. Toilet Seat Cover Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 7. Shower Panel Grohe, Jaquar, Cera, Kohler, Hindware, Lauret, Coronet 8. Chromium Plated Bath Fittings and Fixtures Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 9. PTMT Bath Fittings Polytuff, Cera, Prayag, Commander 10. Kitchen Steel Sink & Rack Jainco, Cera, Prayag, Coronet, Shakti , Silvershine, Nirali 11. HDPE/UPVC Tanks, Overhead Tanks, HDPE STP tanks, SMC panel Tank Sintex, Supreme, Prayag Polymers Pvt Ltd, Prince, Coronet All Types of Paints 1. Acrylic Washable Distemper/Oil Bound Distemper (Interior) Berger, Nerolac, Asian, Jenson & Nicholson, Dulux, Shalimar 2. Interior Acrylic Plastic Emulsion Paints Berger, Nerolac, Asian, Jenson & Nicholson, Dulux 3. Synthetic Enamel Paint Berger, Nerolac, Asian, Jenson & Nicholson,Dulux, Shalimar 4. Cement Based Paint Berger, Nerolac, Asian, Jenson & Nicholson, Snowcem 5. Exterior Acrylic Emulsion Weather Coat paints Asian, Dulux, Berger, Shalimar, Nerolac 6. French Polish Berger, Nerolac, Asian, Jenson & Nicholson 7. Thermoplastic Road marking Paint Asian (Apcomark), STP, Berger, Shalimar, Jenson & Nicholson 8. Water Based Road marking Paint Asian (Apcomark), STP, Berger, Shalimar, Jenson & Nicholson 9. Acid Resistant Paint Asian, Berger, Shalimar 10. White Cement/Wall Putty Birla White, Asian, Berger, Shalimar, JK White All Types of Wall and Floor Tiles 1. Vitrified tiles/Ceramic/Glazed Wall and Floor Tiles Kajaria, Somany, Asian Granito, Cera, Orientbell, Nitco Ltd, RAK Ceramics,Varmora, Quotone, Johnson 2. Precast Concrete Interlocking Paving/Chequred Paver Blocks Nitco, Mehtab Tiles, Ultra Tiles, Terra Firma, Nulite 3. Wooden Laminated Floor Tiles/Wooden Floor/Parquet Tiles Vista, Pargo, Armstrong&Bruce, Greenply 4. Acid Resistant Vitrified Tiles Johnson(Endura), Somany(Durastone), Kajaria, Duracrete 5. Wooden Laminated Flooring/Vinyl Flooring/Rubber Flooring Greenlam, Pargo, Action Tesa,Unitex, Epitome All Types of Pipes 1. UPVC/PPR/HDPE Pipes for Sewerage Jain Irrigation, Kisan, Prince, Supreme, Oriplast, Finolex, Diplast, Reliance, Tirupati, Prayag, Plasto, Astral, Dulet, Coronet 2. PVC Soil/Waste/ Rain Water (SWR) Pipe & Fittings Jain Irrigation, Kisan, Prince, Supreme, Tusker, Reliance, Oriplast, Prayag, 3. CI Centrifugally Cast (spun) Pipes & Fittings Neco Centri, Jindal, Tata Metallic, Srikalahsti Pipes Ltd, Singhal Iron Foundary, HEPCO, Keshav, Jai Balaji Industries 4. CI Pipes & fittings Electrosteel, Kesoram, Tisco, NECO, Kalinga 5. DI Pipes and fittings Jindal Saw Ltd, Electrosteel Casting Ltd, Tata metalics 6. ERW/ MS pipes/ GI Pipes Tata, Jindal Steel, Prakash, Zenith, Bansal, Swastik, BST, Neozone, Newzone Tubes Ltd 7. PPR Pipe SFMC, Prince, Finolex, Fusion Road Work 1. Bitumen of various VG-Grades Indian Oil, Hindustan Petroleum Corporation, Shell 2. Road Furnitures (Cat eyes,Blinkers,Delineators,Polycarbonate Convex Mirrors, Speed Breakers, Bollards 3M, Vertex, Alcolite, Cateye, Avery Denison, Shetal 3. Road Barricades/Metallic Crash Barriers 3M, Avery Denison, Shetal, Shakti
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Nagaland View Result →
5.
New and Renewable Energy #9664758 AOC
Tender For Construction Of Swimming Pool In Anupuram Township.; 1 PART - A : CIVIL WORKSEarthwork in open/ Surface Excavation not exceeding 300mm in depth but exceeding 1.5m in width as well as 10 sqm on plan in all types of soil, mixture of gravel and disintegrated rock, hard stiff clay including grading and levelling neatly by breaking clods, disposal of excavated earth upto 50m lead & lift upto 1.5m, (Disposed soil to be levelled by breaking clods, if any and neatly dressed) etc., all complete as per specifications. 2 Earthwork excavation by mechanical means (Hydraulic excavator)/manual means for foundations, trenches, etc., not exceeding 1.5m in width or 10 sqm on plan in hard gravelly soil and other types of soil including bailing of water, if necessary, dressing of sides, levelling and ramming the bottom of trenches, refilling the sides of foundation as required with selected excavated earth and depositing/disposing the surplus earth (Disposed soil to be levelled by breaking clods, if any and neatly dressed) with lift upto 1.5m and within a lead of 50 metres, etc., all complete as per specifications and as directed. 3 All kinds of soil upto 1.50mtr depth 4 All kinds of soil exceeding 1.50 mtr depth but not exceeding 3.00 mtr depth 5 Ordinary/ soft rock upto 1.50 mtr. Depth 6 Ordinary/ soft rock exceeding 1.50 mtr. depth but not exceeding 3.0 mtr. depth 7 Earthwork in open Excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) in all types of soil, mixture of gravel, disintegrated rock, hard stiff clay, soft rock, hard rock including bailing of water, if necessary, dressing of sides, shoring, benching, levelling and ramming the bottom surfaces, with lift as given below and disposal of excavated earth within a lead of 50 metres, etc., all complete as per specifications and as directed by the Engineer-in-Charge. 8 All kinds of soil - Upto 1.5 mtr depth from AGL 9 Excavating trenches of required width by mechanical means (Hydraulic excavator)/ manual means for pipes, cables etc., for depth upto 1.5m in all kinds of soil including excavation for sockets, dressing of sides, ramming of bottoms, getting out the excavated soil and then refilling the soil as required in layers not exceeding 200mm in depth,consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed within a lead of 50m, (Disposed soil to be levelled by breaking clods, if any and neatly dressed) etc., all complete as per specification. 10 Earthwork excavation for trial pits of required size in hard gravelly soil and other types of soil upto 1.50 mtr. depth without damaging the existing underground service lines including shoring, strutting, bailing of water, protection of existing underground utilities such as water line, service cables, etc., refilling the sides of trial pit as required with selected excavated earth and depositing / disposing the surplus earth (Disposed soil to be levelled by breaking clods, if any and neatly dressed) with a lead of 50 metres and finishing the surface to proper level etc., all complete as per specifications and as directed by Engineer- in-Charge. 11 Filling available selected excavatedearth (excluding rock) in trenches, plinth, sides of foundation etc., in layer not exceeding 200 mm in depth including consolidating each deposited layer by ramming and watering, lead upto 2.0 Km and lift upto 1.5m etc., all complete as per specification. 12 Providing gravel base of approved thickness for flooring, kerbwall, etc., including supplying gravel, spreading gravel in uniform layers, watering, ramming, consolidating, dressing the top surface to the required level, etc., all complete as directed by the Engineer-in-charge. 13 Clearing heavy jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level, removal of rubbish upto a distance of 60m outside the periphery of the area cleared, cutting and stacking the useful fire wood if any within an initial lead of 100 mtrs etc., all complete as per specification and as directed by Engineer-In-Charge. 14 Cutting and felling trees of the girth (measured at a height of 1m above ground level) including cutting of trunks,branches, removing the roots, stacking of serviceable materials and disposal of unserviceable materials within a lead of 200m including filling the pits and depression with excavated earth,etc., all as directed by Engineer-In-Charge. 15 Beyond 300mm girth upto and including 600mm girth. 16 Beyond 600mm girth upto and including 1200mm girth. 17 Trimming of tree branches, which causing hindrance to free vehicle movement, blocking street light and touching the building etc., on road sides, avenues, streets and near buildings, including cutting the branches of trees using necessary tools, collecting, transporting and disposing them at places shown by the department using their own means of conveyance all as directed by the Engineer-in- charge. 18 Beyond 300mm upto and including 600mm Girth Trees 19 Beyond 600mm upto and including 1200mm Girth Trees 20 Providing Pre-Construction Anti-termite Treatment using Chlorpyriphos E.C 20% with 1 % concentration or other approved chemical as detailed below including cost of chemicals, labour and all other incidental charges for entire ground floor area of building and injecting termicide emulsion to the soil in contact with the foundation along the perimeter of both internal and external walls, etc., all as per IS: 6313 (Part-2). 1) Top surface of consolidated earth within plinth walls shall be treated with chemical emulsion @ 5 Ltr/Sq.m of the surface before the sand bed or sub-grade is laid. 2) Treatment along the external perimeter and internal perimeter at junction of the wall and the floor of the building shall be treated with chemical emulsion @ 7.5 Ltr/Sq.m, to facilitate this holes shall be provided @ 150mm apart upto GL for inner side and upto 300mm below GL for external perimeter. 3) The entire treatment shall be done as per the specifications and instructions of the termicide Manufacturer and as directed by the Department. 4) The treatment should be done by an agency specialized in the job having sufficient knowledge of anti termite treatment. 5) Five years guarantee from the date of completion of maintenance period shall be given by the contractor in the prescribed format of the department for the above anti-termite treatment work. 21 Providing and laying in position of plain cement concrete using hard granite broken stone in foundations, trenches etc. including mechanical mixing, ramming, compaction, leveling, curing, dewatering, if any including the cost of formwork etc., all complete as per specifications. 22 1 : 1.5 : 3 (1 cement : 1.5 sand : 3 graded stone aggregate 20mm nominal size) 23 1 : 3 : 6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) 24 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 25mm nominal size) 25 Providing and laying 100mm thick Base course under the flooring with cement concrete 1 : 3 : 6 using 25mm size hard broken stone including consolidation, formwork, curing etc., complete as per specifications. 26 Filling in depression with cement brick aggregate concrete 1:2:4 using 20mm size broken brick aggregate including compacting, curing etc., all complete upto Floor V level 27 Providing, erecting, placing in position and removing Formwork for all insitu concrete works at all lifts and all shapes such as circular works, chamfers, splays, etc., using Steel / Plywood shuttering including centering, scaffolding, strutting, propping with necessary bracing in all areas, fixing of EPs, cutting holes and fixing pipe sleeves, applying of approved form oil over surface in contact with concrete, de-shuttering after specified curing period, etc., all complete as per drawings and specifications.[Note : Measurement for the formwork shall be the area of forms in contact with concrete surfaces. Stop boards for construction joints will not be measured separately for payment. Centering and shuttering where exceeding 3.5m height in one floor shall be measured and paid for separately.] 28 For Plain Surfaces upto 3.5m Lvl 29 For Plain Surfaces above 3.5m Lvl 30 Providing and fixing in position of 50mm thick Thermocole board (Heavy density minimum 18.00 kg / Cum.) wrapped in 200 micron thickness polythene sheets including placing infor machine foundation works, etc., all complete as per specification and as directed by Engineer. 31 Providing and casting insitu Reinforced Cement Concrete of the following grades of design mix by Weigh batching using machine crushed hard broken granite stone of nominal size 20mm including cost of admixtures in recommended proportion wherever required, mechanical mixing, transporting, placing at all lifts, vibrating, consolidation, curing, finishing smooth all exposed faces, for all insitu concreteitems, etc., as per drawings and specifications.Note :1) The rate quoted shall be exclusive of reinforcement and formwork which will be paid for separately under relevant items.2) The rate of concrete shall include the cost of admixture in recommended proportions as per IS 9103 as per direction of Engineer-in-charge.3) Cement proportion for Concrete Mix shall be on the basis of weigh batching only as per design mix.4) The cost towards any upward / downward variation required to obtain the specified strength over the minimum cement content will be paid for or deducted at the rate specified in Schedule F. 32 M 30 Grade Concrete(The Cement content considered is 370 Kg per Cu.m)- Upto FFL 33 M 30 Grade Concrete(The Cement content considered is 370 Kg per cu.m) - above FFL and upto floor V 34 Providing, cutting, bending, placing and binding Steel reinforcement using TMT bars of Fe-500D grade in all reinforced cement concrete works including cutting, bending,fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire, cost of cover blocks in C.M 1:2, etc., complete as per specifications and drawings. ImportantNote: The required quantity of steel reinforcement as mentioned in the schedule should be procured by the contractor only of SAIL, Rashtriya Ispat Nigam Limited (VIZAG), TATA Steel & JINDAL from authorised dealers which shall conform to IS: 1786 (Latest Edition). 35 Providing, hoisting and fixing in position of 50mm thickness of precast slabs in cement concrete 1:1.5:3 using hard broken stones of maximum size 20mm finished smooth of various sizes and patterns including necessary formwork and moulds, mechanical mixing, finishing the exposed surface, curing, fixing at all levels, grouting with CM / Cement grout wherever required, etc., all complete excluding cost of reinforcement which will be measured separately under relevant item as per specifications and as direction of the Engineer-in-charge. 36 Providing, hoisting and fixing in position 50mm thick Precast RCC jali at all lifts of approved pattern and size as per drawing with cement concrete 1 : 1.5:3 including required nominal reinforcement, curing, smooth finished surface with float coat of neat cement on all sides, fixing and jointing with CM 1:3, scaffolding etc., all complete as per drawing and specification. 37 Providing, hoisting and fixing in position of Exhaust fan Hoods as per drawings and specifications using cement concrete 1:1.5:3 using hard broken stones of maximum size 20mm finished smooth of various sizes and patterns, including necessary formwork and moulds, mechanical mixing, finishing the exposed surface, curing, fixing at all levels, grouting with CM / Cement grout wherever required, etc., all completeexcluding cost of reinforcement which will be measured separately under relevant item but including formwork complete. 38 Providing and fixing 5mm thick Polypropylene plastic lattice system of approved design, colour and size at all elevations including fixing withAnodized aluminium frame work or other approved frame work, sealing the joints with required sealants, etc., all as per drawing and specification and as directed by Engineer In Charge. (Note: Rate for frame work with Aluminium will be paid for separately under relevant item) 39 Providing and laying Random Rubble masonry in Cement mortar 1 : 6 (1 cement: 6 coarse sand) in foundation and plinth using hard granite stones obtained from approved quarry includingbond stones of 2 Nos/Sq.m at 1.5 to 1.8 mtrs apart, raking out joints, curing, etc., all as per standard specification. 40 Providing and constructing brick masonry at all lifts in cement mortar 1:5 using well cured flyash bricks of class 5 (non-modular) made up of using Flyash + Sand + Lime + additives (Gypsum/Cement) with waterproofing chemicals and accelerators confirming to IS-12894 or latest edition including suitable scaffolding, raking out joints, continues curing for specified period, etc., all complete as per specifications and drawings. 41 Upto FFL 42 Above FFL 43 Providing and constructing 110mm thick brick workfor partition walls at al liftsin cement mortar 1:4 using well cured flyash bricks of class 5 (non-modular) made up of using Flyash + Sand + Lime + additives (Gypsum/Cement) with waterproofing chemicals and accelerators confirming to IS-12894 or latest edition includingsupplying and providing 2 Nos. of 6/8mm MS rod at every third layer, suitable scaffolding, raking out joints, continues curing for specified period, etc., all complete as per specifications and drawings. 44 Supplying and fixing 20mm (±2mm) thick both side polished Kota Stone slabs for Shelves in Cupboard/Wardrobe/Shoe rack, etc., including fixing by cutting a chase of appropriate width with cutter and embedding the stone into the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished smooth, front face polishing, rounding the edges, etc., all complete as per specifications and as directed by Engineer-in-charge.(Note : Kota stones shall be got approved by the Engineer before making bulk order.) 45 Supplying, fabricating and fixing Steel Grills of required pattern and size for Windows/Ventilators, Staircase Hand Rails, etc., fixed to openings/wooden frames at site, comprising of MS square bars / MS rounds / MS flats, etc., including fixing with necessary wood screws for fixing grills / by welding in steel windows, painting with two coats of anti corrosive paint of approved colour and make over a coat of red oxide zinc chromate primer/ zinc phosphate primer, etc., all completed as per specification.[Note: The rate shall be inclusive of lifting arrangements if any required to hoist and concrete embedments for fixing the steel works.] 46 Supplying, fabricating and fixing Steel work welded in built up sections and framed work at all lifts comprising Chequered plates, MS angles, other structural steel sections, etc., of TATA or SAIL or approved equivalent make including cutting, welding, bending to shape, painting exposed faces with two coats of anti-corrosive paint of approved colour over a coat of red oxide zinc chromate primer / zinc phosphate primer, embedding with Cement concrete, if necessary, etc., all complete as per specifications and drawings.[Note: The rate shall be inclusive of lifting arrangements if any required to hoist and concrete embedments for fixing the steel works. ] 47 In gratings, frames, guard bar, ladders, railings, brackets, gates and similar works 48 Supplying, fabricating and fixing of EPs, Structural Steel work and pipe sleeves etc., at all lifts comprising MS angles, MS plates, tees flats, rounds, squares, other structural steel sections, pipe sleeves and pipes of various sizes, IS channels, IS beams, square rods, etc., of TATA or SAIL or approved equivalent make including cutting, welding, bending to shape, painting exposed faces with two coats of anti-corrosive paint of approved colour over a coat of red oxide zinc chromate primer / zinc phosphate primer, embedding with Cement concrete, etc. complete all as per specifications and drawings.Note: The rate shall be inclusive of lifting arrangements if any required to hoist and concrete embedments for fixing the steel works. 49 Providing and fixing of Fly proof Stainless Steel (Grade 304) wire gauze of 0.4mm dia wire and 1.4mm aperture on both sides of approved quality and make over Partly panelled Door / Grill door including fixing with second class Teak wood beading or Aluminium frame work, cost of screws, nails, rawl plug, etc., all complete as per specification. [Note: Cost of frame work i.e., Steel or wood or aluminium, will be paid for separately under relevant item] 50 Supplying and fixing of factory made Solid WPC door frame having density of 850 - 950 Kg/Cum, water absorption less than 1% ofapproved make with suitable rebate for shutters including the joints shall be mitered & Jointed with self driven self tapping screws of size 75 mm x 4 mm and made by SP 5 epoxy seal and fevikwik / solvent, fixing the frame to wall with suitable dia & length anchor fastener, etc., all complete as per manufacturer specifications and as directed by the Engineer-in-Charge. 51 Supplying and fixing in position single leaf/double leaves of following thick non decorative type factory made Wood Polymer Composite (WPC) solid door shutters of approved make having density of 600 - 800 Kg/Cum, water absorption less than 1% and tensile strength greater than 12 MPa including providing aluminium lipping / Teak wood all-round if required, fixing the lipping with suitable adhesive, fixing required hardware fittings, fixing door using required screws, etc., all complete as per specifications and as directed by Engineer-In-Charge.[Note: Cost of Door frame, hardware fittings and Aluminium / Teak wood lipping will be paid for separately under relevant item.] 52 35mm thick WPC door 53 Providing and fixing in position of 12mm thick Cement bonded pre-laminated particle board of `Bison Lams or approved equivalent make panels prelaminated with decorative lamination on both sides for door shutters, partitions, cupboard shutters, sliding shutters, etc., including cutting to required shape and size, making as per drawing with Anodized aluminium frame alround with lock rails at the centre for each leaf, fixing in structural opening, providing teakwood lipping alround for sliding shutters, etc., all as per specification and as directed by the Engineer-In-Charge. (Note:-Aluminium frame work will be paid for separately under relevant item.) 54 Providing and fixing Sliding glass door Notice board of approved size of make Schoolneeds or Corporate Concepts or Alkosign made up of anodized aluminium frame work along with 5mm thick clear float glass of SAINT GOBAIN or MODI GUARD or ASAHI of approved make for sliding door including providing sliding arrangement, star locks, 12mm thick soft board covered with colour (blue / maroon) blazer / flannel cloth backed with PVC sheet, providing clamps at the back side for wall mounting, etc., all complete as directed by Engineer-in-charge. 55 Supplying, fitting, fixing in position of 5mm thickness Tinted glass of approved colour of Saint Gobain or approved equivalent make for doors, partition, windows, fixed glazing, louvers, etc., including fixing withputty,TW beading, Neoprene gasket, etc., all complete as per drawing and specifications. 56 Supplying, fabricating and fixing of 40mm thick pressed Steel Flush Door of make STEELTECH or SIGNUM or TATA PRAVESH or NCL Seccolor or other approved equivalent make having outer door frame of size 105x60mm (Single Rebate) and steel flush door as detailed below including fabricating the frame, door shutter, providing thermal barrier between sheet, filling the hollow portion of the door with honeycomb/Solid Polyurethene foam, providing vision panel of size 200x300mm with 5mm thick clear toughned glass of approved pattern, fixing the door with required hardware fitting of make Dorma or other approved make, fixing the door assembly with necessary holdfast / anchor fasteners as per site condition, filling the hollow of door frame and hold fast pocket with CC 1:2:4 using 12mm downgraded stone aggregate which will be paid for separately under relevant item., etc., all complete as per drawing, manufacturer specifications and as directed by the Engineer-in-Charge. Door Frame: - Outer door frame of size 105x60mm (Single Rebate) made from 1.2mm thick Galvanized steel sheet with Zinc coating not less than 120gm/Sqm and shall be finished with PU paint of approved colour over zinc rich epoxy primer. Provision for providing fixed glass of 300mm height at top over the door shutter shall be made as per drawing.Door Shutter :- Pressed Steel fully Flush double skin door shutter of thickness 40mm (+5mm) fabricated 0.8mm thick Galvanized steel sheet with Zinc coating not less than 120gm/Sqm with approved colour finish. Top and Lower skin joined by roll formed snap fitting groove on the style. Providing thermal barrier between sheet and filling the hollow portion of the door with solid Polyurethene foam of density not less than 40kg/m3. Providing vision panel of size 200x300mm with 5mm thick clear toughned glass of approved pattern as per drawing. The shutter shall be finished with PU paint of approved colour over zinc rich epoxy primer. 57 Hardware fittings: -Fixing the door with required hardware fitting such as 4 Nos of 100x75x3mm SS ball bearing hinges for each shutter, Mortice Lock with handle and key, SS pull ‘D’ handle of 32x600mm length for each shutter, Door stopper, PVC solid buffer, Door Co-ordinator/ Selector for double leaf door fixed over frame, concealed tower bolts for double leaf shutters, 1 No. of 150mm and 1 No. of 3000mm barrel type premium SS tower bolt. All hardware fittings shall be of make ‘Dorma’ or other approved equivalent make over the wooden inserts placed inside the shutter. Single leaf door of size upto 1000mm width and 2100mm height 58 Double leaf door of size upto 1800mm width and 2500mm height 59 Providing and fixing in position Aluminium partitions, doors, windows, ventilators, louvers,fixed glazing, sliding windows north light glazing, sliding shutter E Channel, trellis, etc., using heavy duty standard anodized aluminium extruded sections, anodized aluminium sheets as per relevant IS code of JINDAL or approved equivalent make including pivots, approved door and window handles, door stopper, EPDM gasket, neoprene gasket lining, stainless steel screw, mastic filling, weather strips, washers, reinforcing the door shutters at top and bottom with MS rod threaded and fixed to vertical members, etc., as required and as per drawing etc., all complete at all heights and as directed by the Engineer in charge.Note:-1. Payment shall be made on the basis of weight of aluminium members/section fabricated and actually installed in position without extra allowance for wastage no extra payment shall be made for non-aluminium consumable items like screws, gasket, weather strips PVC/Neoprene lining, sliding wheels for windows, in built tower bolt, reinforcing rods, etc.,2. Glazing, particle boards, Aluminium grills, mesh etc., will be paid separately under relevant items.3. All fittings except under Note-1 will be paid separately under relevant item and the fittings shall be of matching colour anodized aluminium sections. 4. The aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required cleat angles at no extra cost.5. The aluminium section shall be anodized with MATT FINISH (15 micron thick) finishing and of approved shade/colour with the approval of Engineer-In-Charge. 60 Supplying, fabricating bending and fixing the position of AISI 304 grade stainless steel section for hand railing/hanger rodsmade of Hollow tubes, channels, plates, etc., of required size including butt / mitre welding,grinding, buffing, polishing, making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement, drilling holes in floor/walls embedding/ grouting with suitable grouting materials, etc., all complete as per drawing and specification and as directed by Engineer-In-Charge.Note:- 1. The stainless steel tubular pipe/ section shall conform to ASTM A554/A312.2. All welding joint shall conform to V groove joint and joint shall be ground finish.3. There shall not be any spatter or imperfection on the pipe and the pipe surface shall be ground and smooth.4. External surface of SS pipe shall be buffed to mirror finish. 5. The rate shall be inclusive of providing ball joiners, flush joiners, base plate/flanges, cover plate, end caps epoxy glue, round face/square face glass connecters for fixing etched colour glass if any of required size with gaskets including curved railings where ever required cost of screws, weld etc.,6. The entire pattern of stainless steel hand railing work/pattern including fixing of etched glass, if any in the hand rail shall be got approval by Engineer in charge/Architect before execution.7. Only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc., for payment purpose. 61 Providing and fixing swimming pool starting block of size 500 mm × 500 mm x 400mm of approved make conforming to FINA standards made up of heavy quality stainless steel grade 304 base using hollow tubes, channels, plates, etc., of required size with FRP top in blue colour or other approved colour including butt / mitre welding,grinding, buffing, polishing, making curvature (wherever required),fixing the starting block using suitable anchoring arrangement, finishing, etc., all complete as directed by the Engineer-in-Charge. 62 Supplying and fixing of factory made Solid PVC foam door frame of approvedmakewith suitable rebate for shutters (Profile FP-6030) including the joints shall be mitered & Jointed with self driven self tapping screws of size 38 mm x 4 mm and made by SP 5 epoxy seal and fevikwik / solvent, fixing the frame to wall with suitable dia & length anchor fastener, etc., all complete as per manufacturer specifications and as directed by the Engineer-in-Charge. 63 Supplying and fixing in position single leaf Factory made flush door shutterof 25 mm thick PVC integral foam sheet of make M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) or other equivalent approved make of white colour for flush door shutter including providing recessions for hinges, fixing with following fittings over the granite/PVC door frame using required fasteners, finishing all edges with mixture of PVC powder & solvent for smooth finish, etc., all complete as per specification and as directed by the Engineer-In-Charge. 64 The door shutter shall be fixed with the following hardware fittings: -a)4 Nos. of 75 mm long stainless steel butt hinges ofGARGbrand bearing ISI mark with suitable stainless steel screws.b) Two numbers of 125mm long anodized aluminium Dhandle of make Classic/Crown or approved equivalent as per IS - 208 bearing ISI mark with suitable CP screws.c) Two numbers of 75mm long anodized aluminium baby latch type/SS cranked type tower bolt with suitable CP screws.d) One number of 50mm long solid PVC door buffer with 75mm long CP screws. Note: - 1) All furniture fittings shall be of approved quality and make. 2) The rate quoted shall be inclusive of fixing of door shutters with required hardware fittings as detailed above. 3)The PVC Integral Foam shall be factory manufactured solid section of light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides. The sheet shall have density of 500 - 600 Kg/Cum, water absorption less than 1% and tensile strength greater than 11 MPa.4) The entire door shall be jointless shutter.5) The sizes shall be approximately 700 mm x 2100mm, however exact dimensions shall be measured at site before manufacturing and payment will be paid for finished size of door shutter. 65 Providing and fixing IS : 12817 marked stainless steel butt hinges (Heavy weight) of make GARG or approved equivalent make including fixing with suitable stainless steel screws, etc., complete. 66 125 x 65 x 2.50mm 67 Providing and fixing ofAluminium butt hinges of size 100 x 63 x 4mm conforming to IS : 205 of make Classic or Crown or approved equivalent make including anodized transparent or dyed to required colour or shade, fixing with necessary CP screws, etc., all complete as per specification. 68 Providing and fixing IS:208 marked Aluminium handles of size 125mm x 12mm dia. of make Classic or Crown or approved equivalent make including anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade, fixing with necessary SS screws etc., all complete as per specification. 69 Providing and fixing ISI marked Aluminium sliding door bolts (Aldrops) of Classic or Crown or Global or approved equivalent make as per IS 2681 including anodized transparent or dyed to required colour or shade, fixing with 5 Nos of clip and staple with necessary CP screws etc., all complete as per specification. 70 250 x 16 mm 71 Providing and fixing IS:204 marked Aluminium tower bolts ofmake Classic or Crown or approved equivalent make including anodized transparent or dyed to required colour or shade, fixing with necessary CP screws, etc., all complete as per specification. 72 250 x 12mm 73 Providing and fixing anodized Aluminium hook and eye of 250mm long with suitable screws. 74 Providing and fixing 300mm long plate fixed with three / four prong type anodized aluminium robe hooks of approved make with suitable screws. 75 Providing and fixing Anodized aluminium hanging type door twin rubber stoppers of required colour or shade including fixing with necessary screws etc., all complete as per specifications. 76 Providing and fixing 50mm long and 40mm dia. PVC solid door buffer with 75mm x 10mm SS screws and cup washers. 77 Providing and fixing Stainless steel Roller wheels of approved quality and make foraluminium sliding door shutters including fixing as directed by Engineer-In-Charge 78 Providing and fixing in position universal Hydraulic door closer bearing ISI mark of EVERITE/GODREJ or approved equivalent make as per IS:3564 (Type-B No.2) including fixing as per specifications. 79 Providing and fixing double action hydraulic floor spring of HARDWYN or GODREJ or approved equivalent make with ISI mark, pivoting and all other arrangements including cost of cutting floor, SS cover plates with brass pivots & other necessary accessories required for the work to facilitate smooth operation of the door shutter etc., all complete as directed by the Engineer-in-charge. 80 Providing and fixing in position of built in Mortice lock with pair of Key of GODREJ or approved make for aluminium doors including cutting the frame and fixing with necessary screw etc., complete all as directed by Engineer-In-Charge. 81 Providing and fixing Sliding window latch for sliding windows of make EBCO or other approved make including fixing with necessary screws as directed by the Engineer-in-charge. 82 Supplying, providing and placing in position of 225mm wide and 8-11mm thick flat ribbed type PVC water stop of approved make, the surface of water stoppers shall be ribbed, the outer edges shall be at the level of central bulb and free from blisters, pinholes, cracks and embedded foreign matters as per latest IS specifications includingcutting, placing in position with supports, lapping etc., all complete as per specifications and as directed by Engineer at site. (Note: - The Lapping shall be pasted with suitable adhesives and starched at lap ends as directed by Engineer and no extra payment shall be made for overlapping.) 83 Providing and laying Indian Patent Stone (IPS) flooring 20 mm thick with cement concrete of mix 1:2:4 (1 part cement : 2 parts coarse sand : 4 parts graded stone aggregate), using 20 mm and 10 mm size hard broken stone aggregates, finished with a floating coat of neat cement, including laying in panels, applying cement slurry, compacting, curing, rubbing the surface smooth, and finishing with a power trowel machine etc., all complete as per specifications and as directed by Engineer - in - charge. 84 Providing and fixing glass strips in joints of terrazzo / IPS flooring using 40/20mm wide & 4mm thick glass strips including grinding the top surface smooth to match with the floor, etc., complete as per specifications. 85 Providing and fixing 14-16mm thick White Agaria Marble Stone slab table rubbed, exposed edges rounded and polished of required size and fixed in urinal partitions, shelves above wash basin, etc., by cutting a chase of appropriate width with chase cutter and embedding the stone into the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished smooth, front face polishing, rounding the edges, etc., all complete as per specification and as directed by Engineer-in-charge. 86 Providing and fixing in position of Terracotta Jhali of size 200X200X75mm of make Eurocon or other approved make, pattern and quality at all lifts including scaffolding, fixing & pointing in CM 1:3, curing etc., all complete 87 Providing and fixing Granite stone in Flooring with 16-18mm thick one side Leather finished granite stone slab of approved shade, colour, size and texture laid over 20mm (average) thick base in cement mortar 1 : 4 (1 cement : 4 coarse sand) including laying, chamfering, providing grooves where ever required, pointing the joints with approved grouting materials, curing, cleaning, polishing, etc., all completed as per drawings and specification.Note: The Granite stones shall be got approved by the Engineer before making bulk order. The rates for steps shall be inclusive of providing three Nos. of 4mm grooves @ 25mm interval on all the treads from the nosing edge. 88 Ruby red/Pitch black for Flooring 89 Ruby red/Pitch black for Steps riser and treads using single piece of length upto 2mtr. 90 Providing and fixing Granite stone in Flooring with 16-18mm thick one side mirror polished granite stone slab of approved shade, colour, size and texture laid over 20mm (average) thick base in cement mortar 1 : 4 (1 cement : 4 coarse sand) including laying, chamfering, providing grooves where ever required, pointing the joints with approved grouting materials, curing, cleaning, polishing, etc., all completed as per drawings and specification.Note: The Granite stones shall be got approved by the Engineer before making bulk order. The rates for steps shall be inclusive of providing three Nos. of 4mm grooves @ 25mm interval on all the treads from the nosing edge. 91 Ruby red/Pitch black for Steps riser and treads using single piece of length upto 2mtr. 92 Providing and fixing Marble / Granite work gang saw cut mirror polished, (pre moulded and prepolished slab) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laidover 20mm thick base cement mortar 1 : 4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups, etc., including rubbing, curing, finishing, providing holes of required diameter, providing opening to fix counter basins, providing grooves wherever required, etc., all complete at all levels as per specifications.(Note: The marble/Granite stones slab shall be got approved by the Engineer before making bulk order.) 93 Granite - Ruby red/Jet Black (16 - 18mm thick) 94 Providing and laying Kota stone slab in Flooring with 20-25mm thick Kota stone of required size of approved shade and texturelaid over 20mm (Average) thick base of cement mortar 1 : 4 (1 cement : 4 sand) and joints treated with grey cement slurry mixed with colour pigments to match the shade of the slab including curing, rubbing and polishing in three levels to obtain mirror polish, waxing to give smooth finish, etc., all complete at all levels as per specifications. 95 Providing Half Round Edge Mouldingto 16-18mm thick marble / Granite or 20mm thick Kota stone counters, vanities, sills, etc. including machine polishing theedges to give high gloss finish etc., all complete as per specifications and as directed by Engineer - in – charge. 96 Granite work 97 Providing and laying jointless 10 mm thick heavy-duty vitrified anti-slip tiles, specially designed with foot braille, of approved colour with water absorptions conforming to IS: 15622 (BIb) suitable for swimming pool deck areas as well as outdoor applications of make Johnson (Maxgrip, R11) or other approved equivalent makeincluding setting over a base layer of 20 mm thick cement mortar 1:4, jointing with grey cement slurry @ 3.3 kg per sqm or with Cerabond/other approved adhesive, grouting the joints with epoxy-based joint filling material or other equivalent approved material, curing, cleaning the surface with acid wash, etc., all complete as per specification and as directed by the Engineer-in-Charge.(Note:- The sample shall be got approved by the Engineer-in-charge before making bulk order). 98 Providing and laying of vitrified pool tiles of size 247 x 122mm (or) 240 x 115mm and 8mm thickness in swimming pool/ diving pool area with water absorptions conforming to IS: 15622 (BIb) andFINA (Federation International De Nation) Standard of approved make, including supply of approved color, texture and shade of vitrified tiles floor and wall surface preparation, leveling, fixed over prepared surface using high-performance tile adhesive suitable for submerged applications with 3- 5mm spacer, filling/ scaling of joints between the tiles with epoxy grout of Bal Endura Epoxy grout /Letecrete / Kerakoll with matching colour pigment to make it water tight and finished neat complete, cleaning the surface with acid wash, etc., all complete as per specification and as directed by Engineer in charge.Note:- 1) The sample tile shall be got approved by the Architect/Engineer before procurement. 99 Vitrified plain mosaicpool tiles of blue/black/white colour etc., 100 Designer mosaic tiles of approved pattern and design (Neo pool ocean/Neo pool art blue/Pearl Textura blue etc., 101 Pool accessories (Internal cove, Internal angles) etc., 102 Vitrified anti-slip pool tiles of size 244 x 119 mm 103 Vitrified anti-slip pool step tiles with safety marking of size 244 x 119 mm 104 Providing and laying 1st quality Rectified (Jointless) Ceramic floor tiles (Glazed or Anti-skid) of size 300 x 300 mm or more confirming to IS : 15622 of KAJARIA (Approved concept of Digital Series) or SOMANY (Digital Series - Glasstra) or JOHNSON (Approved concept of Satin & Rustic / Glossy series)or other approved make in all colours, shades in Floors laid over 20 mm thick cement mortar 1 : 4 (1 Cement : 4 Coarse sand)jointing with grey cement slurry @ 3.3 kg per sqm or by using Cement based high polymer modified quick set tile adhesive (water based) or other approved tile adhesive including grouting the joints with white cement and matching pigments etc., all complete as per specification. 105 Providing and fixing 1st quality Rectified (Jointless) Glazed ceramicwall tiles of approved concept series confirming to IS 15622 of KAJARIA/ SOMANY / JOHNSON or other approved make in all colours, shades of following sizes in Skirting, Risers of steps and Dados laid over 12 mm thick bed of cement mortar 1 : 3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm or by using Cement based high polymer modified quick set tile adhesive (water based) or other approved tile adhesive including providing Motiff tiles, pointing in white cement mixed with pigment of matching shade, curing, etc., all complete as per specifications and as directed by Engineer-in-Charge. 106 Wall tiles of 300x600 mm or more [KAJARIA (Digital Series) or JOHNSON (Satin &Rustic / Glossy series)] 107 Supplying and fixing of Rigid PVC nosing of approved quality and colour at the corners of Ceramic tiles dadooing including finishing all complete as directed and as per specifications. 108 Providing and laying Cementitious water proofing treatment system comprising of bond coat, top screed concrete including preparation of surface by chipping/dismantling the existing loose surfaces/ roof tiles with bed mortar, cleaning the surface by washing throughout, filling the cracks using approved crack fillers, injection/ grouting the cracks where ever required with cement slurry using suitable water proofing admixtures, applying bond coat, finishing the top with 20mm thick IPS flooring with water proofing admixtures, leak test, curing, etc., all completeas perspecifications and as directed by the Engineer-in-Charge.Note:-i) This treatment should be done by an agency specialized in the job having sufficient knowledge of waterproofing treatment, authorized trained applicator should be used and certificate should be submitted before commence the work. ii)This work shall be executed at inaccessible terrace at a height of upto 11m. Aluminium mobile tower scaffolding having double width platform with stairway as directed by EIC shall be provided by the contractor to access the working area during execution of work.iii)Five years guarantee from the date of completion of maintenance period shall be given by the contractor in the prescribed format of the department for the workmanship and the materials provided. 109 Plastering the ceiling / exposed surfaces of concrete with CM 1:3; 6mm thick to make the surface uniform, free from undulations and imperfections including hacking pock marking of surfaces with pointed tool, scaffolding, curing at all lifts etc., all complete as per specifications and as directed by Engineer-in­charge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement] 110 Plastering with Cement Mortar 1:5, 12mm thick for brickwork / Concrete on internal faces at all lifts including scaffolding, curing and forming grooves wherever necessary all complete as per specifications and as directed by the Engineer-in­charge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement] 111 Plastering with Cement Mortar 1:5, 12mm thick for brickwork / Concrete on its external faces at all lifts includingadding admixtures of approved make, scaffolding, curing and forming grooves wherever necessary all complete as per specifications and as directed by the Engineer-in­charge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement] 112 Plastering the ceiling / exposed surfaces of concrete with CM 1:3; 12mm thick to make the surface uniform with float coat of neat cement, free from undulations and imperfections including adding admixtures of approved make,hacking pock marking of surfaces with pointed tool, scaffolding, curing at all lifts etc., all complete as per specifications and as directed by Engineer-in­charge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement] 113 Plastering with cement mortar 1:3; 20mm thick including supplying and mixing of water proofing compound of approved make at the rate of 2% (Two percent) by weight of cement or as specified by manufacturer including finishing smooth with a floating coat of neat cement, scaffolding, curing, etc., all complete at all lifts as per specification.[Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement] 114 Providing Raised Cement Mortar bands with plain cement mortar 1:3 for elevational purpose over parapet, sunshade, RCC drop, etc., at all levels including hacking pock marking of concrete surfaces with pointed tool, scaffolding, curing and forming grooves wherever necessary, etc., all complete as per drawing & specifications and as directed by Engineer-In-Charge.(Note : Rate shall be quoted for 1 mtr long and 1 cm wide band.Length will be measured in running metres, width of the band will be measured in CM and the quantity shall be calculated in metre-cm units) 115 12mm thick Raised Cement Mortar bands 50mm wide 116 12mm thick Raised Cement Mortar bands 100mm wide 117 Supplying and fixing in position of Alkali resistance Glass fibre mesh (4-5mm square aperture with 145 gsm) over the joints of RCC and Brick work with cement paste before plastering as directed by Engineer-in-charge. 118 Providing water proofing treatment in water retaining portion of swimming pool etc,. with two coat of two component highly flexible polymer modified cementitious water proofing coating of make FAB chemical (Mixguard AC) or Bostik (Boscolastic) or equivalent including preparation of surface free from dust/oil/grease, sealing the CPVC/PVC/DI sleeve pipes using non shrink grout mortar over bonding coat using SBR chemicals and sealing the joints with polyester fleece along the periphery of UPVC pipes, applying two coat of water proofing etc,. all complete as detailed below as per manufacturer specification and as directed by Engineer-in-charge.Surface preparation: The surface to receive water proof treatment shall be cleaned to make sure that the surface free from dust, dirt, laitance, debris, loose mortars, oil particles etc., which may negatively affect the adhesion of water proof treatment with mother concrete surface. Sealing bore hole gap around the sleeve pipes: The gap around the pipe shall be filled with non shrink grout mortar of make FAB chemicals (Mixgrout NS) or equivalent and providing necessary slurry tight form work to enveloping the pipe with a bead of 6 to 8mm and 5mm above the surface level along with a sealer coat of make FAB chemical (Mixprime AC100) or equivalent and seal with saturated polyester fleece all along the periphery of pipes. 119 Water proof treatment: Providing and applying two coats of two component Highly elastomeric flexible polymer modified cementitious cold applied water proof coating of make FAB chemical (Mixguard AC) or Bostik (Boscolastic)over the prepared surface to cover complete area, finishing etc. Extend the coating up to a minimum of 300mm height to the adjoining wall as per manufacturer specification.Note:- 1) The swimming pool alround RCC wall structure shall be tested for the water leaking before and after treatment by filling with water for 24hours and grouting shall be carried out if any leakage found.2) The treatment should be done by an agency specialized in the job having sufficient knowledge of waterproofing treatment. 3) Five years guarantee from the date of completion of maintenance period shall be given by the contractor in the prescribed format of the department for the workmanship and the materials provided. 120 Painting all internal faces of walls / ceiling plastered surfaces with two coats ofAcrylic Emulsion paint of make Asian (Tractor) / Berger (Bison)or other approved equivalent make of approved shade over a coat of interior wall primer of make Asian (Professional) / Berger (BP Primer) or other approved equivalent make including preparation of surfaces, applying the primer coat, scaffolding,etc., all complete at all lifts as per specifications. 121 Painting all internal faces of walls / plastered surfaces with two coats ofAcrylic Emulsion paint of make Asian (Tractor) / Berger (Bison)or other approved equivalent make of approved shade over a coat of interior wall primer of make Asian (Professional) / Berger (BP Primer) or other approved equivalent make including preparation of surfaces,applying approved makewall care putty as per manufacturer specification, sanding the surface, making surface smooth without porous, applying the primer coat, scaffolding,etc., all complete at all lifts as per specifications. 122 Providing Painting over all exposed surfaces at all heights over rough cast plaster/plain plaster with Two Coats of premium exterior emulsion paint ofmake Asian (APEX - Dust proof exterior emulsion) / Berger (Anti dustt weather coat)or other approved equivalent make of approved shade over a coat of exterior wall primer of make Asian / Berger or other approved equivalent make including preparation of surfaces, curing, scaffolding etc., all complete as per specifications. 123 Painting over Plain Plaster at all lifts. 124 Painting External wall with Textured paint of approved pattern/ finish in three coats (One coat of Texture and two coats of External paint) over a coat of external primer of approved colour and texture of makeBerger (Walmasta) or Asian (Apex Duracast) or approved equivalent make at external surface at all levels and height including preparing the base surface, sand the surface with sand paper, wash and scrub with coir/wire brush, attending to broken edges /corners or patches of plastered surface with cement grout, scaffolding, staging, painting one coat of Weather coat External primer of make Berger or other approved make, application of illusion texture using Berger- Walmasta exterior texture or other approved make, making approved patterns/designs using trowel/ roller, providing vertical/horizontal grooves if any required, painting the top surface with two coats of overcoat using weather coat exterior emulsion of make Berger (Weather coat smooth) or other approved make, cleaning the surface etc., all complete as per manufacturers specification and as directed by Engineer-in-charge. 125 Providing and fixing in position of white glazed vitreous china ware ORISSAPAN water closet of size 580x440mm of PARRYWARE/ HINDWARE or approved equivalent make with S or P trap with all jointing materials including making holes in masonry, fixing the Orissapan, joining the pipe and trap with Lip Ring of PRINCE of approved make, reconstructing the same, encasing the pan and trap with brick jelly concrete 1:2:4 and back filling extra space with river sand/brick jelly concrete,all as per specifications and as directed by the Engineer-in-Charge. 126 Providing and fixing high level/Low level polymer DUAL flushing cistern of 3/6 litres capacity of make PARRYWARE/ HINDWARE model SLIMLINE or approved equivalent conforming to IS: 7231 including fixing cistern at required height and level with necessary TW wall plugs, screws, connecting inlet and outlet, connecting the cistern and closet with suitable dia. PVC pipes and fittings conforming to IS:4985 etc., complete as per standard specifications. 127 Providing and fixing in position of white glazed vitreous chinaware European type water closet comprising of:i) White glazed vitreous chinaware European Water Closet of Parryware (Niagara) or approved equivalent make including fixing with necessary plugs, screws and packing the joints with cement mortar 1:1, joining the pipe and trap with WC pan connector of Ashirvad or approved equivalent make etc., all complete as per specifications and as directed.ii)White Solid Anti-microbial seat cover of Parryware or approved equivalent make including fixing.iii) High level/Low level polymer Dualflushing cistern of 3/6 litres capacity of make PARRYWARE model SLIMLINE or approved equivalent make conforming to IS: 7231 including fixing cistern, connecting the cistern and closet with Flush bends, PVC pipe, WC pan connector of Ashirvad or approved equivalent make, cup bush washer, etc.,Note:(i) Tenderer shall note that the cost quoted shall be inclusive of all materials like EWC, Seat Cover, Flushing Cistern, flush bends, etc., (ii) All the above items for quality colour and make shall be got approved before making bulk order. 128 Providing and fixing in position best vitreous China Wash Basin comprising of:i) White glazed vitreous chinaware wash basin 580 x 450mm Inoya / 550x405mm Nubra Plus of Parryware or approved equivalent make fixed with Multi purpose rag bolt or painted CI bracketsii)32mm heavy quality PTMT waste coupling of Prayag or approved equivalent make, washer, check nuts.iii) 15mm heavy quality C.P. Brass Pillar Cock of make Jaquar (Continental Series) / Prayag (Neptune series) with ISI mark or approved equivalent make.iv)32mm PTMT Bottle trap (Prayag or equivalent make) Note:(i) Tenderer shall note that the cost quoted shall be inclusive of all materials like wash basin, waste coupling, pillar cock, Bottle trap, nails, screws and plugs which are necessary for fixing including cost of labour.(ii)Quality, colour and make for all the above items shall be got approved before making bulk order. 129 Providing and fixing in position of vitreous Chinaware urinal comprising of :i) Urinals of Parryware (New Magnum) or equivalent make with suitable CI brackets/MS clamps.ii) 32mm CP brass urinal domed waste coupling of Jaquar/ Parryware make or equivalent make.iii) Heavy quality 15mm brass spreaders of Parryware make or equivalent make and suitable copper tubes complete as directed.iv) 32mm PTMTBottle trap of Prayag or approved make v) 15mm CP Brass Urinal push angle cock of make Parryware (Lapin-N)Note:(i) Tenderer shall note that the cost quoted shall be inclusive of all materials like urinal basin, waste coupling, spreader, bottle trap, push angle cock, nails, screws and plugs which are necessary for fixing including cost of labour.(ii) All the above items for quality, colour and make shall be got approved before making bulk order. 130 Providing and fixing 5mm thick mirrors of SAINT GOBAIN or approved equivalent make of approved size backed with 4mm thick AC sheet or marine plywood including 30x20mm aluminium frame works, painting with two coats of enamel paint over one coat of primer for backing sheet, fixing in frame work with gasket, fixing firmly against brick wall with suitable clamps, etc., all complete as per specification and as directed by Engineer-in-charge. 131 Providing and fixing heavy quality 600mm CP Towel rail ofapprovedmake with wall flange including suitable CP screws all complete as per specifications and as directed by Engineer-in-charge. 132 Providing and fixing heavy quality Brass GRAB bar 450mm long ofapproved make with wall flange including suitable screws all complete as per specifications and as directed. 133 Providing and fixing heavy quality 15mm C.P. Brass Long body screw down Bib Cock with wall flange of`JAQUAR [Continental Series] or approved equivalent make including fixing with suitable SS valve/cup, flange etc., all complete as per specification. 134 Providing and fixing heavy quality 15mm C.P. Brass BIB COCKwith wall flange of `JAQUAR [Continental Series] or approved equivalent make including fixing with suitable SS valve/cup, flange etc., all complete as per specification. 135 Providing and fixing heavy quality 15mm CP brass Angle Stop Cock with wall flange of JAQUAR [Continental Series] or approved equivalent make including fixing with suitable SS valve/cup, flange etc., all complete as per specification. 136 Providing and fixing heavy quality 15mm CP brasstwo way bib cock with wall flange of `JAQUAR [Continental Series] or approved equivalent make and shape including fixing with suitable SS valve/cup, flange etc., all complete as per specification. 137 Providing and fixing heavy quality 15mm C.P. Brass screw down Concealed type stop cock extra heavy body with adjustable wall flange of `JAQUAR [Continental Series] or approved equivalent make including fixing theconcealed body, exposed parts with suitable flange etc., all complete as per specification and as directed by Engineer-In-Charge. 138 Providing and fixing heavy quality Chromium Plated 100mm dia overhead Shower (Single Flow ABS Body Chrome Plated with Gray Face Plate) along with 190mm long shower arm with wall flange of JAQUAR / PARRYWAREor approved equivalent make including fixing with suitable SS valve/cup, flange etc., all complete as per specification. 139 Supplying and fixing Health Faucet (hand shower - ABS Chrome plated) with 1m long flexible tube with wall hook ofapproved make including fixing the wall hooks, finishing the surface, etc., all complete as per specification and as directed. 140 Providing and fixing 15mm dia. and 450mm long PVC inlet connection with PVC check nuts and washers at both endssuitable for Cold and Hot Water Connection confirming to IS specification of PRAYAG /PARRYWARE or approved equivalent make with ISI mark including fixing etc., all complete as directed by Engineer. 141 Providing and fixing PTMT liquid soap container or approved equivalent make including fixing and making good the surface after fixing as per specifications. 142 Supplying, laying and fixing in position the following sizes of ductile iron pipes in standard length of K-9 class conforming to IS:8329/2000, suitable for rubber gasket (SPR) push on joints, pipes shall be bearing with ISI marks and cement mortar lining inside barrel including lowering them into the excavated trenches and laying, fixing in position to proper grade and alignment all as per IS:12288 and standard specifications including cutting the pipes to the required length, cost of labour, pipes and other materials, tools and plants for laying and installing the pipe lines and testing the lines to the required hydrostatic pressure of 14 kgs./sq.cm. at the specified intervals but excluding cost of Ductile iron specials / fittings and joints which will be paid under relevant items.(Note: The effective length of the DI fittings / specials, valves, double flanged pipes, etc., will be deducted from the overall measurement of the pipe line for making payment against this item). 143 100mm dia. K-9 classDI pipes 144 200mm dia. K-9 classDI pipes 145 Providing and fixing rubber gasket (SBR or EPDM) push on joints to the following sizes of DI pipes including insertion of rubber gasket into the centering rings of the socket of the pipes and pushing the spigot end into socket and making the joint intact to withstand the hydrostatic pressure of 14Kgs./sq.cm. including cost of all materials, rubber gasket, tools and plants, etc., complete conforming to IS:5382/1985 and IS:12288/1987. 146 100mm dia. NBDI pipes 147 200mm dia. NBDI pipes 148 Supplying and fixing tested heavy quality DI specials / fittings K-12 class socket, spigot and flanged specials such as bends, collars tapers, tees, duckfoot bend, flanged socket and flanged spigot tail pieces, blank flanges, etc. and conforming toIS:9523/2000 and IS:8329/2000 drilling holes to the flanged fittings shall be PN classification and socket specials /fittings shall be suitable for rubber gasket (SPR) push on joints, etc., complete (Joints will be paid for separately under relevant items). 149 Upto 300mm dia. 150 Labour charges only for cutting the existing main DI/CI pipe line of following diameter with steel saw and making provision for new connection by introducing the DI/CI specials including making good the leakages, testing at required pressure allcomplete as per specifications and as directed at site. (Note: Cost of CI/DI specials and joints will be paid for separately under relevant item.) 151 100mm dia. pipes 152 200mm dia. pipes 153 Providing and fixing PVC Nahani trap of FINOLEX/PRINCE or approved equivalent make conforming to the relevant IS code, heavy quality of self cleaning design with 75mm internal dia. and outlet 125mm dia. PVC grating with perforated holes on top, including embedding in cement concrete 1:2:4, forming circular holes by providing and fixing 110mm OD uPVC SWR-TYPE B pipes of required height upto floor level, levelling and rendering smooth, making good the floor and wall etc., complete as per specifications. (Rate shall include cost of PVC pipe and it shall not be paid extra). 154 Providing and fixing PVC Multi Floor Trap of FINOLEX/PRINCE or approved equivalent make conforming to the relevant IS code, heavy quality of self cleaning design with 110mm internal dia and outlet 125mm dia. PVC grating with perforated holes on top, including embedding in cement concrete 1:2:4, forming circular holes by providing and fixing 110mm OD PVC pipes of required height upto floor level, levelling and rendering smooth, connecting the outlet and inlets, making good the floor and wall etc., complete as per specifications. (Note: Rate shall be inclusive of cost of PVC pipe and embedding PCC.) 155 Providing and fixing 150mm Square PTMT gratings of Prayag or approved equivalent make over the rain water pipes fixing in CM 1:3 as per specifications. 156 Providing and fixing best quality 110mm OD SWR uPVC pipes - Type A (suitable for ventilation work and rain water applications) conforming to IS: 13592 - latest edition with ISI mark including moulded fittings/specials such as bends, shoes, etc., jointing with seal ring conforming to IS - 5382 leaving 10mm gap for thermal expansion, fixing to the wall with adequate no. of PVC clips for rain water down take pipes etc., all complete as per specifications and as directed by the Engineer in charge. 157 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(Class-I) of SDR-11 of approved make conforming to IS 15778 having thermal stability for hot and cold water supply including providing CPVC plain and brass threadedfittings, fixing the pipe with concealed clamps at 1 m spacing, jointing of pipes and fittings with 1 step CPVC solvent cement, cost of cutting chasses and making good the same, testing of joints complete, etc., all complete as per specification and as directed by Engineer In-Charge. (Note: Concealed work including cutting chases and making good the wall, etc.,) 158 20mm dia Nominal size 159 25mm dia Nominal size 160 32mm dia Nominal size 161 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Class-I) of SDR-11 of approved make conforming to IS 15778 having thermal stability for hot and cold water supply including providing all CPVC plain and brass threadedfittings, fixing the clamps at 1m spacing, jointing of pipes and fittings with 1 step CPVC solvent cement, testing of joints, etc., all complete as per specification and as directed by Engineer In-Charge. (Internal work-Exposed on wall) 162 25mm dia Nominal size 163 32mm dia Nominal size 164 40mm dia Nominal size 165 50mm dia Nominal size 166 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of Sch-40 (ASTM F441) of approved makehaving thermal stability for hot and cold water supply for External work including providing all CPVC plain and brass threadedfittings, fixing the clamps at 1m spacing, jointing of pipes and fittings with 1 step CPVC solvent cement, testing of joints, etc., all complete as per specification and as directed by Engineer In-Charge. (Internal work-Exposed on wall) 167 80mm dia. Nominal size 168 100mm dia. Nominal size 169 150mm dia. Nominal size 170 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Class-I) of SDR-11 of approved make conforming to IS 15778 having thermal stability for hot and cold water supplyfor External work including providing all CPVC plain and brass threadedfittings, jointing of pipes and fittings with 1 step CPVC solvent cement, testing of joints, trenching and refilling, etc., all complete as per specification and as directed by Engineer In-Charge. Note : Cost of Earth work excavation will be paid for separately under relevant item. 171 25mm dia. Nominal size 172 50mm dia. Nominal size 173 Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of Sch-40 (ASTM F441) of approved make having thermal stability for hot and cold water supply for External work including providing all CPVC plain and brass threadedfittings, jointing of pipes and fittings with 1 step CPVC solvent cement, testing of joints, trenching and refilling, etc., all complete as per specification and as directed by Engineer In-Charge. Note : Cost of Earth work excavation will be paid for separately under relevant item. 174 100mm dia. Nominal size 175 150mm dia. Nominal size 176 Supplying and fixing flanged joint suitable for 50mm dia CPVC SDR 11 pipe of approved make including providing CPVC flange adapter (threaded or socket type), fixing the joints with backing ring, rubber gasket and required bolts & nuts, to makeleak-proof connection , all joints shall be properly aligned and tightened, etc., all complete in all respects as per specifications and as directed by the Engineer-in-Charge. 177 Supplying and fixing flange joint suitable for CPVC ASTM D1785 (Schedule 40) pipes and specials of approved make, including providing CPVC flange adapter (threaded or socket type), fixing the joints with backing ring, rubber gasket and required bolts & nuts, to makeleak-proof connection , all joints shall be properly aligned and tightened, etc., all complete in all respects as per specifications and as directed by the Engineer-in-Charge. 178 80mm dia flanged set 179 100mm dia flanged set 180 150mm dia flanged set 181 Providing and fixing the following internal dia. Gun metal full way gate valve of Leader or approved equivalent make bearing ISI mark confirming to IS:778 with female ends, screwed bonnet, integral seat, non rising spindle class-I including fixing the valve etc., all complete as directed by the Engineer-in-charge. 182 25mm internal dia. Gate valve 183 32mm internal dia. Gate valve 184 40mm internal dia. Gate valve 185 50mm internal dia. Gate valve 186 Providing and fixing the following internal dia. Double flanged Sluice Valve of Kirloskar/Leader or approved equivalent make bearing ISI mark confirming to IS:14846 for PN 1.6 rating Hydraulic pressure with female ends, screwed bonnet, integral seat, non rising spindle class-I including fixing the valve with bolts, nuts, rubber insertion, etc.,all complete as directed by the Engineer-in-charge. 187 100mm dia Sluice valve 188 200mm dia Sluice valve 189 Providing and fixing the following internal dia. threaded GI pipe sleeve of medium quality not exceeding in length of 500mm welded with 6mm thick MS plate of size 150 x 150mm or 300x300mm with one coat of red oxide primer including fixing in formwork, embedded in water tank side wall, etc., all complete. 190 40mm Nominal Bore 191 50mm Nominal Bore 192 Providing and fixing 50mm internal dia. Brass Ball cock of make Peaco or Prayag as per IS: 1703 bearing ISI mark with heavy quality PVC float and brass rod of heavy full bore type including fixing as directed by Engineer-In-Charge. 193 Supplying, laying and jointing of following dia. of Rigid PVC pipe and specials of approvedmake with ISI mark as per IS 4985:2000 unloading at work site, laying and fixing the pipes and specials withnecessary solvent cement of approved make, testing to required working pressure etc., all complete excluding earthwork excavation which will be paid separately under relevant item as per specification and as directed by the Engineer-in-charge. 194 50mm OD PVC pipe of class-3 (6Kg/Sq.cm) 195 Providing and laying of following dia. of SWR uPVC pipes - Type B (Suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) of approved make conforming to IS - 13592 - Latest edition including the cost of PVC pasting type specials such as door bends, door tees and cowls etc., heavy quality for soil waste or vent or antisyphonage PVC pipe, fixing with PVC pipe clips or laid embedded under floor slab and fixed to walls wherever required, etc., all complete as per specifications. 196 75mm OD uPVC pipes and specials. 197 110mm OD uPVC pipes and specials. 198 160mm OD uPVC pipes and specials. 199 Providing and laying of underground drainage / Sewerage uPVC pipes of SN 8 class (SDR-34) conforming to IS:15328 of approved make suitable for elastomeric sealing ring joints including cost of spigot and socket endpipes with provision for sealing rings, specials, cutting, jointing with elastomeric seals, testing, etc., all complete as per specifications and as directed by Engineer-in-Charge. 200 110mm OD uPVC pipes SN8 Class 201 160mm OD uPVC pipes SN8 Class 202 200mm OD uPVC pipes SN8 Class 203 Providing and constructing GULLY CHAMBER of internal finished size 300 x 300mm including providing, supplying and fixing 150 x 150mm (±10mm) PVC Gully trap with PVC grating at top of approved make including excavation in all types of soils, backfilling, embedding the trap in plain cement concrete 1:4.5:8 using 40mm size granite aggregates and constructing thechamber above the embedded PVC with 110mm thick (plus or minus 5mm) bricks in Cement Mortar 1:5 with well burnt stock bricks, plastering over both internal and external faces of brick work with Cement Mortar 1:3; 12mm thickfinished smooth with a floating coat of neat cement on both faces, providing and fixing 400 x 400 x 25mm precast slab in reinforced cement concrete of 1:2:4 using 12mm and below hard broken granite stones including cost of gully trap, chamber etc., all complete as per specification. 204 Construction of rectangular Manhole/ Inspection Chamber of following size clear internally with brick masonry walls 230mm thick using well burnt chamber bricks in Cement Mortar 1:5 (with necessary corbelling as required), plastering with Cement Mortar 1:3; 12mm thick inside and outside,inside finished smooth with a floating coat of neat cement and outside trowel finished including excavation in all types of soils, back filling, providing and laying bed concrete 150mm thick and having 150mm wide projection on all the sides with Plain Cement Concrete 1:4.5:8 using 40mm maximum size hard granite broken stone, forming, benching and channellingin plain cement concrete 1:2:4 using 20mm maximum size hard broken granite stone, finishing smooth etc., all as per specifications, drawings and as directed at site - to an initial depth upto 1.00 metre.(Note: The rate quoted shall be excluding the cost of cover slab & steel reinforcement which will be paid for separately under relevant item.) 205 600x450mm for initial depth of 1.00 metre. 206 Extra depth of rectangular manhole/ inspection chambers of size 600x450mm over the initial depth of 1.00 metre. 207 900x600mm for initial depth of 1.00 metre. 208 Extra depth of rectangular manhole/ inspection chambers of size 900x600mm over the initial depth of 1.00 metre. 209 Construction of rectangular rain water Chamber of 900 x 600mm size clear internally with brick masonry walls 230mm thick using well burnt chamber bricks in Cement Mortar 1:5 (with necessary corbelling as required), plastering with Cement Mortar 1:3; 12mm thick inside and outside,inside finished smooth with a floating coat of neat cement and outside trowel finished including excavation in all types of soils, back filling, providing and laying bed concrete 150mm thick and having 150mm wide projection on all the sides with Plain Cement Concrete 1:4.5:8 using 40mm maximum size hard granite broken stone, forming, benching and channellingin plain cement concrete 1:2:4 using 20mm maximum size hard broken granite stone, finishing smooth etc., all as per specifications, drawings and as directed at site - to an initial depth upto 1.00 metre.(Note: The rate quoted shall be excluding the cost of cover slab & steel reinforcement which will be paid for separately under relevant item.) 210 Supplying and fixing of Steel steps with zinc coating of size dowel distance 330mm c/c and leg length 225mm with 16mm dia. Core material of steel with zinc coating encapsulated with plastics / PE of 2.5mm thick of make Linktech or other approved make including fixing by drilling holes, applying cement paste with bonding agents, fixing the rungs to required alignment, etc., all complete as per specifications and as directed by Engineer-in-charge. 211 Making connection of drain or sewer line with existing manhole including breaking in to and make good the walls, floors with cement concrete 1:2:4 mix (1cement:2 coarse sand: 4 graded stone aggregate20mm nominal size) cement plastered on both side with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain, etc., complete. 212 For pipes 250 to 300 mm diameter 213 Providing and laying factory-made swimming pool overflow channel gratings of 350 mm width and 25 mm depth with 3-pin interlocking type made up of UV-stabilized 100% virgin polypropylene + co-polymer material of blue or other approved colour and pattern with anti-slip ribed texture conforming to ASTM/DIN standards including laying in the required pattern over drain, jointing the grating with 3 pin interlocking, finishing the surface, etc., all complete as per manufacturer specifications and as directed by Engineer-in-Charge Note: 1)The gratings shall have a minimum load-bearing capacity of 300 kg/m² with anti-slip ribbed textured surface2)The grating shall have high resistance to chlorine, saltwater, and mild acids. 214 Supplying laying and jointing of RCC hume pipes with collars of class NP-2 as per IS specifications including aligning to proper level and line as directed at site, jointing with Cement Mortar 1:2, curing, etc., complete as per specification. 215 100mm dia. RCC hume pipes 216 150mm dia. RCC hume pipes 217 250mm dia. RCC hume pipes 218 300mm dia. RCC hume pipes 219 Providing and laying of Wet Mix Macadam (WMM) for Sub-base and base course conforming to clause 406 of MORT&H Specification for road and bridge works (Fifth Revision) using 53mm downgraded stone aggregate including cost of coarse aggregates, fine aggregate, premixing the Material with water at OMC in mechanical mix plant, carriage of mixed Material by tipper to site, laying in uniform layers with paver/motor grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, etc., all as per specification and as directed by Engineer-in-charge. 220 Providing and laying factory made precast Kerb stone of M-20 grade cement concrete of size 100mm thick & 500mm ± 50mm depth with suitable interlocking arrangement, top chamfering of size 50x70 mm or as approved size including excavation, conveying, laying the precast kerb blocks in position to the required line, level and curvature, making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), jointing / pointing the joints with cement mortar 1:3, refilling the sides, compacting, making drainage opening wherever required, etc., all complete as per specification and as directed. (Note: Length of finished Kerb edging shall be measured for payment and Precast kerb stone shall be approved by Engineer-in-charge.) 221 Painting road side kerb wall with Two coats of Acrylic water based Road marking paint conforming to IS 164 of make Asian paints (Apcotrack IS)or Berger (Guideline RM 164 Paint) or other approved equivalent make comprising of white and black colour strips and including preparation of surfaces, applying with brush in alternate strips, etc., all complete as per manufacturer specification and as directed by Engineer-in-charge. 222 Providing and laying 60mm thick factory made chamfered edgeprefabricated cement concrete interlocking Solid / perforated paver block of M-30 grade made by table vibratory method using PU moulded with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand including cost of sand filling, levelling with required slope, ramming the surface, watering, consolidation using vibratory earth rammers, filling the joints with sand, cleaning, etc., all complete as per specification and as directed by the Engineer-in­charge. 223 Providing and laying Dry stone pitching of 230mm thick for revetment using retrieved RR stone including collecting with department source place, cleaning the old mortar from retrieved stone, laying pitching to the required grade and slope, packing and filling the intersects, watering, compaction, Flush / sunk pointing the joints with CM 1:3, etc.,all complete as per specifications and as directed by Engineer-in-charge. (Note:-Required quantity of RR stone will be supplied by department at free of cost). 224 Providing and fixing Granite stone Plaque of approved size using 16-18mm thick gang saw cut mirror polished (pre moulded and prepolished slab) Jet black or other approved shade granite stone engraved with approved font letters, logo, symbol, etc., using machine cut/ flame finishand border/letters with golden finish colour including fixing the plaque over 12mm thick Cement mortar 1 : 3 (1 Cement : 3 Coarse sand) or approved adhesive, pointing with White cement mortar 1 : 2 (1 White cement : 2 Marble dust) with an admixture of pigment to match the granite/marble shade, fixing to be secured to the backing by means of suitable approved cramps if required, finishing the surface, curing, etc.,all complete as per specification and as directed by Engineer-In-Charge. 225 Dismantling Reinforced cement concrete at all lifts including clearing and depositing the same with a distance of 100 metres as directed by Engineer-in-charge. 226 Dismantling RR Masonry in cement mortar at all lifts including stacking of RR stone, clearing and depositing the debris within a distance of 100 metres all as directed by Engineer-in-charge. 227 Dismantling Brick workin cement mortar at all lifts including clearing and depositing the debris within a distance of 100 metres all as directed by Engineer-in-charge. 228 PART - B : ELECTRICALWORKS Supply and Embedment of following sizes of flush mountingPOWDER COATEDTPN/SPN DB Enclosures with Double Doorand per Phase isolation DBs consisting of Phase, Neutral and Earth Bus and interconnecting wires etc. at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge. 229 12 WAY Cat No:DETPI012DD (Vertical) or equivalent make TPN TIER Per Phase Isolation (PPI) DB 230 Supply and Embedment of following sizes Cable end termination box at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge. 231 TPN,12 way Cable end box, Cat No:DETPI012DD or equivalent suitable for TPN, 12 way TPN TIER Per Phase Isolation Distribution Board Cat No:DBTPI012DD (Vertical) 232 Supply and installation of following sizes ofHeavy Duty, Hot Dip Galvanised MS ERW Conduitsfor Electrical & Communication System with all the required accessories like round JBs, Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc, on roof slab, column, beams etc as per the detailed specification. 233 25 mm Dia 1.8mm, wall thickness GI Heavy Duty ERW Conduits with 75mm deep junction boxes 234 32 mm Dia 1.8mm, wall thickness GI Heavy Duty ERW Conduits with 75mm deep junction boxes 235 Supply and installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with required Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers,Copper Clips, Copper Conductor, GI Wire etc, in Floor, Walls, Brick, Block Masonry, etc. including chasing & replasteringas per the detailed specification. 236 25 mm Dia 1.8mm, wall thickness Heavy Duty ERW Conduits with 50mm deep junction boxes 237 32 mm Dia 1.8mm, wall thickness Heavy Duty ERW Conduits with 50mm deep junction boxes 238 40 mm Dia 2mm, wall thickness Heavy Duty ERW Conduits with 50mm deep junction boxes 239 Supply and Embedment of 50mm Deep, Square/Rectangular Concealed type and GI double earthed modular metal boxes of the following types and as specified in RCC/Brick/Concrete Block Masonry with finishing and making good as per the detailed specification. 240 ONE/TWO Module 241 THREE Module 242 FOUR Module 243 SIX Module 244 Supply and Embedment of MS fan Hook Boxes in RCC roof slab with finishing and making good as per drawing No:IGC/ESD/9170/8009 and the detailed specification. 245 Supply and embedment of concealed type Hot dip galvanised MS boxes of the following sizes in RCC/Brick/Concrete Block Masonry with finishing and making good as per the detailed specification. 246 150(W)X150(H)X80(D)mm, 1.8mm thick sheet Hot dip galvanised MS box 247 300(W)X300(H)X120(D)mm,1.8mm thick sheet Hot dip galvanised MS box 248 Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc., 249 MS fabrication 1 coat primer & 2 coats synthetic enamel paint 250 Supply and installation of Hume Pipe Direct in ground. 251 Supply and installation of 150 mm Dia. 2 Mtrs Long, NP 2 Class Hume Pipes at a depth of 1200 mm including supply of Collars and fixing them with1:1 cement mortar and curing, including excavation in all types of soil, backfilling complete as directed by Engineer-in-Charge. 252 Supply and installation of following sizes ofHeavy Duty, Hot Dip Galvanised GI pipes with required accessories on Floor, column, beams etc including chasing and replastering as per the detailed specification. 253 80 mm NB, 4.8mm, wall thickness Heavy Duty GI pipe along with solid long GI bends 254 50 mm NB, 4.5mm wall thickness Heavy Duty GI pipe along with solid long GI bends 255 Supplyand installation of Powder coated MS boxes with SS Krone base module (i.e. For mounting of telephone Krone disconnection modules) for the following D.B sizes. 256 500(W)x300(H)x150(D) MS Box. 257 PART - C : MECHANICAL WORKS (PIPE WORKS & ACCESSORIES)Supply, installation, testing and commissioning of Kirloskar make Electrical driven Horizontal, End suction, Top Discharge Back Pull out Design Centrifugal pump with suction and delivery of size 125 x 80 mm with CF6M / SS316 impeller, cast iron casing, SS410 shaft fitted with mechanical seal, single stage capable of delivering75 m³/hr against a total head of 35-45 mtrs coupled by means of Love joy coupling to a 4 pole Squirrel cage type totally enclosed fan cooled (TEFC) motor suitable for operation on 415v, 3phase, 50 +/- 5 hz, S1 duty, 50 deg C ambient temperature, class F insulation, IP-55 with a rating of 15 KW whcih should confirm to IS:325 1978 of make kirlosker / cromptn / siemens etc., complete including coupling guard, anti-vibration rubber pads with Common bed plate of fabricated mild steel channel with suitable bolt and nuts and with RCC pedestal 1:1.5:3 as required for above pump & motor reinforced with 12mm TMT bar with all necessary formwork and plastering as required with suitable J-bolt and nuts and the pedestral holes shall be grouted etc., all as per the specification and as directed by the engineer-in-charge.Note : Contractor shall produce manufactures test certificate for motor and pump and performance datasheet for pump. 258 Supplying and fixing in position Wafer type swing check reflux valve, as per relevant IS standardof following specifications: Suitable for handling clear cold water of Nominal Pressure: - 1.6 MPa.Operating position of the valve: Horizontal. Material of Construction: - Body –CI, Flap: SS, Locking plug: - GM,Locking pin: - H.T. Brass, Hinge pin: Brass, O-Ring: EPDM, Eye bolt: Carbon SteelNote: -1. For each valve enclose the Hydrostatic Body Test and Hydrostatic Seat test. 259 150 mm dia 260 100 mm dia 261 Supplying, fixing, testing and commissioning of butterfly valve confirming to IS 13095 latest standard, of following sizes as required. Fluid handled: - Water. Maximum working pressure at 20⁰C: - PN 1.6 Service: - Tight shut off. Mode of operation: - Manual with lever. Type of construction: - Wafer. Face to Face Dimensions short series - (200mm dia - 60mm, 150mm dia - 56mm & 80mm dia -46mm). Valve installation: - Horizontal.Material of construction: - Body: - Cast Iron. Disc: - Stainless steel. Shaft: - Stainless Steel. Seating Ring: - EPDM Rubber. Note: -1. For each valve enclose the Hydrostatic Body Test and Hydrostatic Seat test. 262 150 mm dia 263 100 mm dia 264 Providing and fixing of 100mm size cast iron flanged Y strainer with SS304 mesh for suction pipes of pumps with ISI mark etc. all complete as directed by Engineer-in-charge.Note: All the flanged joints shall be paid under relevant items. 265 Supplying and fixing in position of Pressure gauge all Stainless Steel parts (Pressure range 0 to 16 Kg /Sq. cm) of 4 dia including cost of M.S pressure pipe assemblies, one ball valve ( Ø 15 mm (½) all Stainless Steel parts, IS marked complete as required.) adjecent to the dial gauge and M.S specials etc., all complete as directed by Engineer-in-charge. 266 Supplying, fixing and testing of following dia CPVC Ball Valve of approved makeincluding fixing over GI/CPVC pipe using with female ends, screwed bonnet, integral seat, non rising spindle class-I including fixing the valve etc., all complete as per specification and as directed by Engineer In-Charge. 267 25mm dia. CPVC Ball valve 268 50mm dia. CPVC Ball valve 269 Supply and fixing pool water outlets made of ABS plastic with maximum flow upto 9 cum/hr, 2 inch inlet dia on existing CPVC pipeline including providing Tee/Reducer T in pipeline, connections etc as required. Make: Emaux/ Aquanomics. as per direction of Engineer-in-charge.(Floor Inlets For Main Pool & kids pool) 270 Supply, installation, testing and commissioning of liquid hypochlorite electronic dosing pump of capacity 0- 12 LPH at 2 bar pressure rating, Power supply: 230V, AC, 50 HZ, 40 watts Single phase,Antisyphon, stop valve, foot valve/y-strainer, 3m LDPE tubing. Electronically operated Mechanically actuated diaphragm, Manual stroke length adjustable while running. Liquid end body: PP, Valve body: PVC, Ring Seal : Tefflon, Tube : LDPE. 271 Supply, installation, testing and commissioning of liquid soda ash electronic dosing pump of capacity 0- 12 LPH at 2 bar pressure rating, Power supply: 230V, AC, 50 HZ, 40 watts Single phase,Antisyphon, stop valve, foot valve/y-strainer, 3m LDPE tubing. Electronically operated Mechanically actuated diaphragm, Manual stroke length adjustable while running. Liquid end body: PP, Valve body: PVC, Ring Seal : Tefflon, Tube : LDPE. 272 Supply, installation, testing and commissioning of alum dosing pump of capacity 0- 12 LPH at 2 bar pressure rating, Power supply: 230V, AC, 50 HZ, 40 watts Single phase,Antisyphon, stop valve, foot valve/y-strainer, 3m LDPE tubing. Electronically operated Mechanically actuated diaphragm, Manual stroke length adjustable while running. Liquid end body: PP, Valve body: PVC, Ring Seal : Tefflon, Tube : LDPE. 273 PRESSURE SAND FILTER : Supply, erection testing and commissioning of Anti corrosive fiber glass winding design vertical high flow Side Mounted Pressure Sand Filter with diameter - 1400 mm, Over all Height 1350 mm which is durable, deforming- proof and corrosion resistant. It shall have efficient multi - lateral under drain assembly, self-cleaning laterals given totally balanced flow and back washing and a provision to vent the air from the top. Flow/unit - min 75 m3/hour, Filtration area - min 1.5m2, Maximum working pressure - 2.5 kgf/cm2. Inlet and out let Mouth size: 2 inch. Type of Inlet distributor - Multi arm diffuser type made from UPVC and polypropylene, Type of bottom collector - Multi arm diffuser type made from UPVC and polypropylene including all accessories, fittings etc., all complete as per the specification and as directed by Engineer-in-charge. 274 Providing and filiing of Silica Sand for filter with granulometry between 0.4 and 0.8 mm including materials and labour charges completely as required and directed by Engineer-in-charge. 275 Supply, fixing, testing and commissioning ofside mounted 6-position multi port valve made of molded ABS material with heavy-duty plastic handles capable of handling a working pressure of 2.5 kgf/cm2 with a 2 inch sizeinlet, outlet and backwash ports. The valve shall comprise of functions namely Drain, Filter, Backwash, Rinse, Whirlpool, Close. The valve shall be equipped with a precise pressure gauge.
Contract Date: Feb 25, 2026 Contract Value : ₹ 5.06 Crore
Government Departments No of Bidders 3
Tamil Nadu View Result →
6.
Defence #9588956 AOC
Tender For Special Repair Of Government Md Accommodation Building No P-74/01 To 08 (Paleram Enclave) Of 415 Fd Hosp At Nams; 1 Demolition of cement concrete (unreinforced) in ground floors and pavingexc. 15 cm thickness including part chipping (below or above ground level) complete all as specified and directed. 2 Dismantling of terazoo in dado, walls tiles,including bedding but backing and rubbish off permises complete all as specified and directed. 3 Demolition of reinforcement cement concrete above the ground floors not exc. 15 cm thickness (Reinforcement cut as required to facilitate demolition)such as cooking platform, chajjas, staire case etc complete all as specified and directed. 4 Material and labour for Treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. 5 M&L Along the external wall below concrete or masonry around using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. 6 M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 Sqm, in floor etc set and jointed in neat cement slurry pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. 7 Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 Sqm, as in skirting,dado in vertical surfaces etc. and including 10 mm thick backingplaster 1:4 etc complete all as specified and directed. 8 Material and labour for Non-Skid ceramic colour tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including screed bed 15 mm thick rendering in CM 1:6 complete all as specified and directed. 9 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. 10 M&LGreenmarble work 18 to 20mm thick(table rubbed and polished) laid over 15 mm thick screed bed of CM 1:6 as in flooring and jointed with grey cement slurry mixed with pigment to match the shade, rubbing &polishing complete all as specified and directed. 11 M&LGreen Marble work 18 to 20mm thick(table rubbed and polished) laid over 10mm thick cement plaster of CM 1:3 as inriser /skirting and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishingand complete all as specified and directed. 12 Material and labour for 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles completeall as specified and directed. 13 Material and labour for glazed ceramic coloured tiles of size 450 mm x 300 mm x 7 mm on vertical surface such as skirting, dados, risers to steps etc set &jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10 mm thick in cement mortar (1:4), etc. complete all as specified and directed. 14 Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. 15 Material and labour for Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed. 16 Material and labour for Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed. 17 Material and labour for PCC 1:4:8 type D-2 (using 40mm graded agg) in foundation, sub base, mass concrete etc. completeall as specified and directed. 18 Material and labour for 75 mm thick cement concrete 1:3:6 type C2 , using 40 mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed. 19 Material and labour for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc all complete. 20 Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support,formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ fillingwith PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thickafter applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shapeand applyingtwo coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed. 21 Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. 22 Material and labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work and finishing the surface even and smooth (without using extra cement) including WPC @ 3% weight of cement etc. complete all as specified and directed. Note : WPC will be measured and paid separately under appropriate items. 23 Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. 24 Material and labour for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed. 25 Material and labour for applying finishing walls with Acrylic smooth exterior paint of required shade : New surface work (Two coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed. 26 Material and labour for applying two coats of oil bound distemper over a coat of primer including 2mm thick wall care putty on wall of newly plasterdsurfaces of walls, pillars cornces etc. complete all as specified and directed. 27 M&L for Applying 2 mm thick wall care putty to achieve even and smooth surfaces on old plaster surfaces wall/ceiling and obtain using sand paper complete all as specified and directed. 28 Material and labour for preparation of newly plastered surfaces of ceiling including pilasters, cornics etc and applying three coats of white wash complete all as specified and directed. 29 Material and labour for Prepration of old surfaces of walls, pillars, cornices etc. including scrapping down smoke, soot, and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes, cracks etc. on plastered or unplastered surfaces Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. 30 Material and labour for Prepration of old surfaces of walls, pillars, cornices etc. including scrapping down smoke, soot, and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes, cracks etc. on plastered or unplastered surfaces and applyingTwo coats of oil bound distemper on wall (white or tinted) complete all as specified and directed. 31 Material and labour for Prepration of old surfaces of ceiling including scrapping down smoke, soot, and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes, cracks etc. on plastered or unplastered surfaces and applying onecoats of white wash on ceiling surface complete all as specified and directed. 32 Supply onlywater proofing compound, ISI marked complete all as specified and directed. 33 Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed. 34 All as per item No 33.00 above but exc 1.5 Sqm but not. exc. 4 Sqm each complete all as specified and directed. 35 Material and labour for 35 mm thick factory made solid (Wood polymer composite) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including double S.S wire mesh shall be fixed with 15 x 15 Square tubes in is rails with screwing 8 x 28 mm heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufactures instructions complete all as specified and directed. 36 Material and labour for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note : Stainless steel butt hinges and necessary S.S screws shall be paid separately. 37 Material and labour for Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as speicifed and directed. 38 All as per ser item No 37.00 above but of frame size 65 x 125 mm including all fittings making good after complete all as speicifed and directed. 39 Supply and fix anodised aluminium powder coated any colour minimum coating 50 micron three track windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frame and shutter of fixing with handles, tower bolts, rubber gasket and maruti lock, and making good to disturbed surface with cement concrete 1:2:4 including taking down of old chowkhat with shutter and making good to disturbed surface with cement mortar in 1:4 complete all as specified and directed. 40 S&F anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary 5.00 mm thick sheettinted glass quality & glazing, aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), rollers etc complete all as specified and directed. 41 Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed. 42 Supply and fix 100 mm stainesless steel butthinges, fixed, type B-21 complete all as specified and directed. 43 Supply and fix aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed. 44 S&F 300mm mild steel ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed. 45 Supply and fix 300 mm longstainless steel tower bolts of fixied with both side nut and boltcomplete all as specified and directed. 46 Supply and fix 200 mm stainless steel handles, both side nut and bolt fixed complete all as specified and directed. 47 Supply and fix floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed. 48 Supply and fix 100 mm long hasp & staple aluminium anodised wire type,incl bolt to hinge plate and fixed with screw complete all as specified and directed. 49 Supply and fix 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed. 50 S&F Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified. 51 S&Fin repair chromium plated glass corner size 300mm x 300mm complete all as specified and directed. 52 Supply and fixMS Peg set of six powder coated complete all as specified and directed. 53 Supply and fix in repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed. 54 Taking up or down steel tubing and connections for 15 mm bore of pipe complete all as specified and directed. 55 Taking up or down steel tubing and connections for 20 mm bore of pipe complete all as specified and directed. 56 Supply & laying of CPVC pipes 15 mm bore,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floorsincl all necessary fittings complete all as specified and directed. 57 Supply & laying of CPVC pipes 20 mm bore,SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including all necessary fittings complete all as specified and directed. 58 Supply & fix in repair, for 15mm bore fancy type central hole basin mixer with 135 mm extension body fixed spout without popup waste system with 350 mm long braided hoses of 15 degree flow angle complete all as specified and directed. 59 Supply & fix in repair, brass chromium plated single lever wall mixer4-in-1 system with provision of both over head showerwith 115 mm long bend pipe connecting legs and wall flange complete all as specified and directed. 60 Supply & fix in repair, 15 mm bore single lever Sink mixer complete all as specified and directed. 61 Supply & fix in repair, Vitreous China Wash Hand Basin, white, flat back, size 550 x 400 mm including brass coupling, mild steel brackets fixed to wall with pedestal etc. complete all as specified and directed. 62 Supply & fix in repair, Viterous China wash down water closet pan (pedestal pattern) coloured includingP or S trapincl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device complete all as specified and directed. 63 Supply & fix in repair, 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32 mm dia fixed to wall complete all as specified and directed. 64 Supply and fix in repair, 8 mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook complete all specified and directed. 65 Supply and fix in repair, PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed. 66 Supply and fix in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size complete all as specified and directed. 67 Supply and fix in repair, 600mm x 450mm plain edge mirror of selected quality glass not less than 5mm thick, mounted on wall fixed with stainless steel studany size complete all as specified and directed. 68 Supply and fix in repair, Bib tap 15 mm bore, fancytype chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 69 S&F, in repairs, brass, chromium plated tubular towel rack20mm dia 60cm long between flanges, 300mm wide with hooks complete all as specifed and directed. 70 Supply and fix in repair, angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. 71 Supply and fix in repair, CP two way angle valvewith wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 72 S & F in repair 15 bore chromium plated concealed Angle/stop cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed. 73 Supply and fix in repair, CP, soap dish holder complete all as specified and directed. 74 Supply and fix in repair, Soap Dispenser with glass bottle complete all as specified and directed. 75 Supply and fix in repair, tumbler holder complete all as specified and directed. 76 Supply and fix in repair, Towel ring round with round flange complete all as specified and directed. 77 Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. 78 Supply and fix in repair, 1mm thick kitchen plate rack made of stainless steel 900 x 750 x 250mm size fixing with wooden plug with suitable size of screws complete all as specified and directed. 79 Supply and fix in repair, chromium plated overhead shower rose swivel type 200mm with CP arms 400 mm long complete all as specified and directed 80 Supply and fix PVC (SWR) P trap for 110 mm dia etc. complete all as specified and directed. 81 Supply and fix in repair, chromium plated toilet paper holder with flap call complete all as specified and directed. 82 Material and labour for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete. 83 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. 84 Supply and fix PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. 85 Supply and fix PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. 86 Supply and fix PVC (SWR) pipes 50 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. 87 Supply and fix clamp made out of 50 x 5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipecomplete all as specified and directed. 88 Supply and fix PVC (SWR) plain bend any radius for 75 mm bore complete all as specified and directed. 89 Supply and fix PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed. 90 Supply and fix PVC (SWR) plain bend T (Single T)equal or unequalany radius for 110mm bore complete all as specified and directed. 91 Supply and fix PVC (SWR) plain bend T (Single T)equal or unequalany radius for 75 mm bore complete all as specified and directed. 92 Supply and fix in repair, PVC (SWR) floor/ gully trap, square or round mounthed, any type of size 125 x 100 mm, setting and jointing with tting and jointing with solvent cement cement (1:1) complete all as specified and directed. 93 Supply and fix in repair, cockroach trap cum grating of size 100 mm x 100 mm complete all as specified and directed. 94 Supply and fix PVC (SWR) branch pieces, single (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access doorcomplete all as specified and directed. 95 All as per item No 94.00 above but 75 mm bore complete all as specified and directed. 96 Supply and fix PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. 97 Supply and fix in repair PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed. 98 Supplying, Hoisting and fixingin repairs 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) & fixing arrangement for inlet/outlet/over flow and vent pipe of standard size including taking down old water storage tank all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixedcomplete all as specified and directed. 99 Supply and fix in repair Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipeincluding adaptor to join the pipe complete all as specidfied and directed. 100 Material and labour for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cementin concrete (unreinforced)of any description and in any position in ground floor and pavings any thickness (below or above ground level) complete all as specified and directed. 101 Material and labour for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under :-(a) Application of Two component Acrylic modified cementitious coating(i) The surfaces to be applied shall be completely dry andfree from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coatings and achieve a gripping profile that is clean, dry and free from laitance and any other form of surface contamination. The installation instructions in manufacturer’s published literature should be strictly complied with, including but not limited to the following :- (ii) Chipping out any visible cracks in “V-Groove” pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/ Dr Fixit 302 SBR latex / Perma latex SBR / FOSROC Nitabond SBR latex / Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(iii) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of Sika Top Seal – 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO. 102 (iv) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified Cementitious coating of Sika Top Seal – 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturer’s instructions.(v) Apply Glass Fabric Sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP whilst the first coat is wet.(vi) Once touch dry, apply second coat of Acrylic modified Cementitious coating of Sika Top Seal – 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturer’s instructions on the entire area.(vii) Second coat shall be applied after 6-8 Hrs of application of previous coat andin the direction right angle to the previous coat.(viii) The waterproofing coating should be taken to a height minimum 300 mm above the finished floor level on the vertical surface.(ix) It is essential to cure Acrylic modified Cementitious coating immediately after application (minimum 6-8 Hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.(x) A protection plaster (12-15mm thick) in CM 1:3 admixed with appropriate Integral water proofing compound has to be applied on the walls.Admixture : Sika Plastocrete Plus / FOSROC / Dr Fixit / STP / CICO confirming to IS 2645.Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with Sika Plastocrete over the applied water proofing coating on horizontalsurfaces. 103 (xi) All the corners and joints should be pre-treated with an elastic waterproofingsealing tape with a Woven bonding mesh on each surface and an elastic expansionszone in the centre of Make Sika Seal Tape S/FOSROC/Dr Fixit/STP.(xii) The membrane has to be protected in accordance with the manufacturer’srecommendations until placement of concrete. The membrane to be inspected fordamage just prior to concrete placement and make repairs in accordance withmanufacturer’s recommendations(xiii) Waterproofing treatment has to be carried out through applicators authorised(b)All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (c)Al CI traps in sunken slabs to be enclosed with PCC 1:1.5:3 (min 15cm) All-round. (d)The sunken portion shall be filled with PCC 1:5:10type E-2 (using 40mm stone aggregate) completeall as specified (e)Providing drainage spout pipe GI 40 mm dia bore light grade upto outside of outer wall (Approx 450 mm to 600 mm long) including cutting to existing wall and making good the disturbed surfacecomplete all as specified and directed.(f)Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified. Note: Items No 101.02 (d), (e) & (f) shall be measured and paid separately. 104 S&F drainage spout pipe GI 40 mm dia bore light grade upto outside of outer wall (Approx 450 mm to 600 mm long) including cutting to existing wall and making good the disturbed surfacecomplete all as specified and directed. 105 M&L, for moulded machine pressed precast concrete paver blockrubber moulded with colour Yellow , Black and Red only glossy finished with with laquar and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick sand cushion below paver blocks complete all as specified and directed. 106 Dismantling boarding any description fixed in any position with nailsv complete all as specified and directed. 107 Supply & fix20 mm thick, PVC sheet one side prelaminated of approved texture (Celuca ply of Rajshree make or equivalent as in Kitchen cabinet, cub board (with shelves and partitions) including necessary fitting & fixture as per manuacturers instructions complete all as specified and directed. 108 Dismantling brick tiles or terrcing single layer as in roofing complete all as specified and directed. 109 Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. 110 Material and labour for 50 mm avarage thicknessPCC 1:2:4type B1 (using 20 mm graded stone aggregate) as roof padding, haunching, sub base floor complete all as specified and directed. 111 M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.6 Kg/Sqm including APP based polymeric membrane minimum wighing 3 Kg/Sqm and minimum 3mm thick reinforced with ployster non wove fabric (wt not less than 150 Gms/Sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps shall be 75mm lenght wise 100mm width wise of membrane complete all as specified and directed. 112 Material and labour for 40 mm thick brick tiles laid over and including 25 mm screed bead in CM 1:4 and joints grouted flush in CM 1:3 mixed with 5% of crued oil by weight of cement,complete all as specified and directed. 113 All as per item No 110.00 above but except bricks tiles complete all as specified and directed. 114 Material and labour for damproofing to wall with two component Acrylic polymer cementitious water proof elastomeric coating foor grade mix to form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass mesh cloth as first coat is still green with overlap of joints of fibre mesh not less than 100 mm, then finally apply second layer mix by brush to entire surface of container covering 0.6 - 0.75 Sqm /Kg at 1 mm thickness in two coat depending on the level of substrate and curing it for minimum 3 days complete all as specified and directed.Note : Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 metre etc. 115 Material and labour for cement concrete (1:2:4), type B0, using 12.5 graded stone aggregate in roof kerbs of coved fillets of 75mm radius at junction bof roof slab and parapet wall, vertical surfaces and like etc complete all as specified and directed. 116 M&L Cutting chases, pinning in brick walls /stone concrete block or slab walls, making good to facings where required using expended metal in required size & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc & making good, cutting not exc 10 cm but not exceeded 20 cmgrith complete all as specified and directed. 117 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in soft/loose soil etc complete all as specified and directed. 118 Returning, filing in, excavated soil including spreading, levelling, watering and well rammingin layers not exceeding 25cm etc complete all as specified and directed. 119 Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed. 120 Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed. 121 Material and labour for laying DWCP 150 mm dia pipes in trenchesClass SN-8 conforming to IS 16098 (Part -2) in 6 mtr length with coupler complete all as specified and directed. 122 Material and labour for cement concrete bed to drain pipes including packing under and haunching againstthe sides of pipe after they are laid & tested for 150 mm bore of pipe withcement concrete 1:4:8 type D-2 using 40mm graded stone aggregatecomplete all as specified and directed. 123 Material and labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed. 124 Supply and fix ornamental stainless steelhollow section pipes/sheets, pieces suchas pipe caps globe at top 18 guage and grade304 as in staircase railing including welding, moulding riveting nut and bolt with all necessary fittings complete all as specified and directed. 125 Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces staircase etc. complete drilled for fixing of steel gate sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, runing rails and guides) and hanging also fastning and fixing confirming to FE-290 (Gde E-165) complete all as specified and directed. 126 S&F mild steel framed work such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified and directed. 127 Material and labour for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified and directed. 128 Material and labour for RCC 1:1.5:3, type A1, using 20mm graded stone aggregate as in suspended slabs supported on walls/columns, in floors, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 129 Material and labour for form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and simillar works not exceeding 20cm thick and rough finished surfaces of concrete all as specified and directed. 130 Supply and fix Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including ,cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 131 Removing building materials upto to a distance of 1.00 KMto 2.5KM or under, including loading, unloading and stacking at the destination complete all as specified and directed. 132 Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed. 133 M&L for point wiring with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi strandedcopper conductor cable new PVC Concealed conduitfor one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick plastic laminated sheet top cover, sheet screws and 1.6mm thick GI sunken boxes after removing old unserviceable plastic laminated sheeet and sunken boxes included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc complete all as specified and directed Note : The cost ofsunken boxes and bakellite sheet is included in the quoted rate. 134 One light /bell point /Fan point / Exhaust fan point controlled by one 5 amp switch one way complete all as specified and directed. 135 All as per ser item No 131.00 above but for one 5 ampsindependent Board complete all as specified and directed. 136 All as per ser item No 131.00 above but on the same board complete all as specified and directed. 137 All a per item No 131.00 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete all as specified and directed. 138 Supply and fixing of switch piano type 6 Amps one way 230 volts AC complete all as specified and directed. 139 Supply and Fixing of socket outlet 5 pin, 6 Amps flushtype 230 volts AC complete all as specified anddirected 140 Supply and Fixing of switch piano 16 Amps type one way 230 volts AC complete all as specified anddirected 141 Supply and Fixing of socket outlet 6 pin 6/16 Amps multi purpose flushtype 230 volts AC complete all as specified and directed 142 Supply and Fixing of switchtype regulator 5 step230 volts ACcomplete all as specified and directed 143 Supply and fixing of ceiling rose 65/50 mm two to three terminals complete all as specified and directed. 144 Supply and fix of MCB 40 Amps single pole with neutral, AC 230 Volts complete all as specified and directed. 145 Supply and fix of MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of B series in distribution boards complete all as specifiedand directed. 146 Supply and fixing in replacement Sheet metal enclosure for DBs when MCBs to be used double door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified and directed. 147 Supply and fix in replacementfor sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium graderigid PVC conduit, including cutting chases in brick wall,and making good to match the existing specifications complete all as specified and directed. Note : (i)Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit.(ii)Two run of6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS)as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit. 148 All as per ser item No 142.00 above but for 4.0 sqmm complete all as specified and directed. 149 Material and labour of lamp holder insulated body with 9 Watt LED Bulb,back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm230V AC cool day light 6500K having maximum height 1020 mm heavy duty complete all as specified and directed. 150 Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory madeTPN Vertical4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulatedcopper jumpers of suitable size from the MCCB to the out going circuits oneincoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wireof suitable rating complete all as spcd and directed with the following accessories :-(a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No.(Note:- Out going MCB shall be measured and paid for separately) 151 Supply and fix exhaust fan, steel body single phase 230V of size 300 mm sweep with blades, frame and louvers complete all as specified and directed. 152 Supply and fixing of LED T-8 tube light fitting with single side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed. 153 Supply & fixLED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens complete all as specified and directed. 154 Supply and fixingof security lightmounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos ofpole fitting clamps made out of MS flat of size 40 x 6 mm and nutsand boltsand painting with aluminium paint, complete all as specified and directed. 155 Supply, laying in trenches or wall and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed. 156 M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade ) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PART 1 , with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switche, DBs) completeall as specified &testing on completion. 157 Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps ofsize 63mm outer dia and 50 mm inner dia etc complete all as specified and directed. 158 Supply and lay on wall/ floor etc GI pipe light grade of dia 32 mm for protection of cable complete all as specified and directed. 159 Taking down ceiling fan/geyser/exhaust fan in situ and refixing after servicing, repairing and painting them, scratching old paint and preparation of surface for painting with one coat of white / grey enmeled paint and including cable from ceiling rose to fan complete all as specified and as directed. 160 S & F in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 amps complete all as specified and as directed. 161 Supply and fixing in replacement of bell push 6 amps one way 230 volts AC complete all as specified anddirected. 162 Supply and fixing in replacement of bell ding dong AC 230 volts complete all as specified and as directed. 163 Supply and fixing in replacement pvc connection of size 600 mm length 15 mm dia complete all as specified and as directed 164 Supply and fix Electronic meter temper proof LCD display with polycarbonate cover 230 v, 10-60amp,accuracy class-1 50 hz, conforming to IS 13779,IP-54 with parameter to show data, time, currentreading, load, PF, voltage and KWH complete all as specified and directed. 165 S & F in replacement of LED bulked light fittings 10 watt white including LED strip as per IP 65 in engineering plastic housing with clear primatic diffuserand making necessary connection complete all as specified and directed.
Contract Date: Feb 09, 2026 Contract Value : ₹ 42.04 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Punjab View Result →
7.
Defence #9509548 AOC
Tender For Spl Repairs To Bldg No P-2/2, P-2/3 Gn Rd And 15/7, 15/8 Js Arora Enclave Under Ge (West) Jrc; 1 Dismantlingof brick tiles single layer as in roofcovering complete all as specified 2 Demolition of mud in roofs any thicknessincludingplastering and leeping (whether full thickness removed or only a part thereof) and washing the surface thoroughly to remove all mud complete all as specified. 3 M & L brushing neat cement slurry with 3kg of cement per sqm complete all as specified 4 M&L for P.C.C 1:2:4 type B0 using12.50mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. 5 M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilLgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately. 6 Supply only Liquid water proofing compound complete all as specified and as directed. 7 M&L for liquid Polyurea-PU based hybrid elastomeric water proofing membrane including fibre mesh between the PU coats at existing/newly constructed roofs, RCC structure like basement raft, retaining wall, water retaining structure, tunnels/subways and bridge deck etc. in two or more coats.The product must have pot life of >90 mins., tensile strength > 12.6 Mpa, elongation of > 500% conforming to ASTM D 2370 & puncture resistance of >200 N as per ASTM E 154 with min. consumption of 1.5 Kg per sqm for 1.2mm DFT in two- three coats.The surface needs to be primed with water soluble self impregnated epoxy primer in two coats to be applied @ 200-250 gms/sqm/coat prior to Polyurea -PU application.Furthermor, (in case the substrate is not suitable) 15mm plaster is advisable for surface prepration before application of the water proofing membrane to avoid pinholes or functional difficulties of the system. Note:- The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm. 8 M & L 40mm thick Brick tiles laid on bedding layer of CM 1;3 15mm thick andjoints grouted flush in cement mortar 1:3mixed with 5% of crude oil by weight of cement over APP membrane complete all as specified and directed. 9 M & L 40mm thick Brick tiles laid on bedding layer of CM 1;3 15mm thick andjoints grouted flush in cement mortar 1:3mixed with 5% of crude oil by weight ofcement over APP membrane except tiles complete all as specified and directed. 10 M & L flush pointingin CM 1:3 to brick tiles laid flat in roof or paving incuding raking out joints complete all as specified and directed. 11 Taking up or down existing steel 15 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed 12 Taking up or down existing steel 20 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed 13 Supply & fixing, 15 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed. 14 Supply & fixing, 20 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed 15 Dismantling of water tanks (PVC/RCC of any description) exc 250 ltr and n.exc 500ltr capacity and removing from site complete all as specified and as directed. 16 Dismantling of water tanks (PVC/RCC of any description) exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed. 17 S&F 500 ltr capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. 18 S&F 1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. 19 S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed. 20 S & F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. 21 S & F in repair 15 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. 22 Demolition and breaking up drain pipesAC/PVC pipe in event n.exc 150 mm dia including all fittings. 23 S&F for 110 mm PVC (SWR)Rain water pipessingle socketedin any length with rubber ring joints fixed towalls all as specified and directed 24 S&F 110mm bore PVC (SWR) bends in any radius complete all as specified and directed. 25 S&F PVC (SWR) junction single (single tee)equal or unequal, dia of pipe 110 mm completeall as specified and directed. 26 S & F 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed. 27 S&F 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed. 28 S&F PVC (SWR) junction single (single tee)equal or unequal, dia of pipe 75 mm completeall as specified and directed. 29 S&F 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cementincl taking down damaged floor trap in any positioncomplete all as specified and directed. 30 Taking down cement plaster of any descriptionany thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified. 31 Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles all as specified. 32 M&L for brick work with sub class B old size bricks straight or curved on plan to anyradius with old sizebrick thick walls built in cement mortar 1:6all as specified. 33 M&L for 15 mm thick cement mortar 1:4 on brick or concretesurface finished even and smooth without using extra cement all as specified 34 M&L forpreparing new plastered or unplastered wall surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)all as specified and directed by Engr-in-charge. 35 M&L forcomplete removal of existing treatments on wall surfaces and appliedtwo coat of weather coatover one coat of primer all as specified and directed by Engr-in-charge. 36 M&L for 15 mm thick cement mortar 1:6 on brick or concretesurface finished even and smooth without using extra cement all as specified 37 M&L for preparing surfaces new plasteredsurfaces of wallsby applying two coats of oil bounddistemperover a coat of 1mm thick wallcare putty on plastered surface preparatory to distempering complete all as specified. 38 M&L Complete removal of existing treatmentof wall surfaces applyingtwo coat of oil bounddistempering over a coat of wall care white putty on plastered surface all as specified and directed by Engr-in-Charge. 39 M&L Plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified 40 M & L for preparation of new plastered surfaces of Ceilings and applying three coats of white wash etc. complete all as sepcified and directed 41 M & L for preparation of old plastered surfaces of ceilings and applying two coats of white wash etc. complete all as sepcified and directed 42 M & L for preparation of old plastered surfaces of walls (for washrooms) and applying two coats of white wash etc. complete all as sepcified and directed 43 S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white including bolts, flushpipe of polyethylene of low or high density or PVC 32 mm dia anti syphonage pipe etc complete 44 Supply and fixing plastic water closet seat cover white closed patern with flat bottom and cover and mild steel chromium plated or aluminised hinging devices 45 S & FS&F brass chromium plated health faucet Cat Part No: ALD -565 for pedestal pattern water closet including PVC flexible pipe along with complete necessary fittings complete all as specified and as directed. 46 M&L for fixing in repairs vitreous China squatting pan,‘Orissa’ pattern (IWC) size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc.. complete. 47 S&F looking mirrorsize 600x450mm of selected quality fixed on wall with ,aluminum frame5.5mm thick etc. back side Acrylic sheet. 48 Supply and fixing in replacement chromium plated grating 125mm dia circular fixing with cement mortar 1:3 on nahani trap/floor trap complete all as specified and directed. 49 S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm 50 M&L for 25 mmthick granite machine cut as incooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over bedding layer or screed 15 mm thick screed bed in cement mortar 1:4 including cutting , grinding, rounding edges, rubbing and polishing complete all as complete all as specified and directed by Engr-in-Charge. 51 Material and labour for 25mm dia Stainless steel pipe curtain rod, powder coatedfixed with & includingSS hooks/ brackets and SS decorative finials (at both side), shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall for SS hook complete all as specified and directed. 52 S&F in repair Stop valve (Concealed) ,15 mm cast copper alloy with long shank &cup with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed fancy type complete. 53 S&F in repair 15mm angular stop valves, fancy type chromium plated, with long shank and cup(concealed) screwed down, high pressure with crutch or butter fly handlescrewed both endsforiron pipe or for unionsand fixed . 54 S&F in repairBib tap fancy type (Long body)cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete fixed in repairs . 55 S&F PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe 10 Ltrcapacity complete allas specified fixed in repairs. 56 S&F connection pipe braided with wires (reinforced) 45cm long with brass check nut and PVC washers at both ends complete all as specified and directed. 57 S&F Hot and cold basin mixer fancy typesingle ordoublelegged cast copper alloy screwed down high pressure with crutch or butterfly handlescrewed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified. 58 S&F Hot and cold wall mixer fancy typesingle ordoublelegged cast copper alloy screwed down high pressure with crutch or butterfly handlescrewed both ends iron pipe suitable for 15mm bore pipe fixed to wall complete all as specified. 59 Supply and fixing Vitreous china wash hand basin (Oval shape) under counter type bowl type including waste coupling and pipe all as specifed and directed. 60 S&F brass chromium plated shower rose of 150 mm size (Square shape) and 450 mm long CP arm, with or without swivel joints includingfixing to steel pipeor union all as specified and directed by Engineer - in - Charge. 61 S&F Brass chromium plated tubular tower rail20mm dia , D type, 60cm longbetween flanges complete 62 S&F 5 mm thick Glass corner shelf including CP railing, radius 300mm complete all as specified and directed. 63 S&F 5 mm Glass Straight shelf 600 x 125 mm including CP railingcomplete all as specified and directed. 64 S&F Brass CP Soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed. 65 S&F looking mirrorsize 600 x 450 mm of selected quality fixed on wall with ,aluminum frame5.5 mm thick etc. back side Acrylic sheet 66 Taking down chowkhats or frame with shutter w/o taking off shutter from the framearea not exc 1.5 Sqm each all as specified. 67 Taking down chowkhats or frame with shutter w/o taking off shutter from the framearea exc 1.5 Sqm but n exc 4.00 sameach all as specified. 68 Taking down shuttersof any descriptionn. exc 1 Sqmeach complete all as specified and directed. 69 Taking down shuttersof any descriptionexc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. 70 S&F 25 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. (For Wardrobe shutters) 71 Mild steel conforming to Fe 290, Gde E-165 framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling etc., complete all as specified and directed. 72 S&F 2nd class hardwood 35mm thick factory made plain, framed, panelled shutters (two panels) withlock rail and panel of 9mm BWP commercial ply or12mm veneered particle board with commercialveneering on both faces. The size of rail and stile asper IS : 1003 (Part-I), kiln seasoned and chemically pressure treated 73 S&F glazed and skelton shutters 35mm thick open rebatedand prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a). 74 S&F 250 mm longMild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified. 75 Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paintcomplete all as specified 76 S&F powder coated aluminium frame for doors,windows, partitions ,ventilatorswith one or more rebatesincluding joining cleat for fixing etc completeall asspecified. 77 S&F powder aluminium window and ventilator shutters (Sliding type)without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified 78 S&Fsheet glass 4.8 mm thick ordinary quality to be fixed in Al frame work in square exc 0.5 sqm in each pane 79 Anodised aluminium grill (powder coated) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. 80 S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z sction 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh/Glass and painting shall be measured and paid separately under appropriate item. 81 M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane. 82 S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks. 83 S/F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing. 84 S&F factory made solid panel PVC door shutter 30mm thick (style) consisiting of frame made out ofM.S.Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing in the frame at the site as per specification & drawing. 85 M&L 2nd class Hardwood Plain fillets. Cross section 2.50sqcm square 9 sqcm exc 6sqcm and n.exc 13 sqcm rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed. (For framework of forthcoming item below) 86 M&L 18/19mm thick prelaminatedparticle board exterior grade prelaminatedone side with decorativechoice lamination and other side balancingwhite lamination, fixed with screws to timberframed work including taking down fixing arrangement complete all as specified 87 M & L for 18-19 mm thick for external teak wood lipping, 6mm thick fixed with nails 88 S&Ffloor door stopper aluminum alloy body anodized with hard drawn steel spring overall length 150mm 89 S&Fcontinuous piano hinges mild steel bright finish of flap width 40mm 90 M&L Hasp and staplesafety type aluminum anodised75mm size with mild steel hinge pin includingbolt to hinge plate and fixedwith screws complete all as specified 91 Preparation of new wood and wood basedsurfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. 92 M&Lfor Preparing old wooden surfaces and applying one coat of synthetic enamel paint over Surfaces of any description, over 10cm in width or girth 93 M&Lfor Preparing old steel surfaces and applying one coat of synthetic enamel paint over Surfaces of any description, over 10cm in width or girth 94 Supply & Fixing 100mm size stainless steel butt hinges heavy grade extruded stainless steel hinge plate complete all as specified. 95 S&F Aluminum anodized barrel tower boltof extruded section of size 150mm complete all as specified. 96 S&Fextruded Aluminum alloy handle fabricated of size 150mm all as specified and directed 97 S&Fextruded Aluminum alloy handle fabricated of size 100mm all as specified and directed 98 S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width andweight between 61 to 80 Kg complete all as specified as directed. 99 Dismantlingfloor hearth or wall tilingincludingcement mortar bedding ( but not backing)anddisposal of rubbish outside MD land complete all as specified 100 Given sunken floor shall be treated as per following instructions and directed by Engr in Charge :-(A) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or miling to remove cement laitance, existing coatings and achieve a gripping profile that is clean dry and free from laitance and any other form of surfece contamination. The installation instructions n manufacturers published literature should be strictly complied with, includingf but not limited to the following:-(aa) Chipping out any visible cracks in V-Groove pattern as applicable. Special attention on this part. Cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putty/Dr fixit 302 SBR latex/ Perma Latex SBR/ FOSROC Nitabond SBR latex/ Asian Paints latex as required. Final cleaning of surface with power grinder, Wire brush, hair brush & vacuum pressure if required.(bb) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO.(cc) Whilist the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO of viscosity as per manufacturers instructions.(dd) Apply glass febric sheet of Sika Fab 1/FOSROC/ DR Fixit/ STP whilist the first coat is wet.(ee) Once touch dry, apply second coat of Acrylic modified Cementitious coating of SIKA Top Seal-107/ Brush bond FOSROC/ DR Fixit/ STP/CICO of viscosity as per manufacturers instructions on the entire area.(ff) Second coat shall be applied 6-8 hours of application of previous coat and in the direction right angle to the previous coat.(gg) The waterproofing coating should be taken to a height minimumn300 mm above the finished floor level on the vertical surface.(hh) It is essential to cure Acrylic modified Cementitious coating immediately after application (minimum 6-8 hours drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. 101 A protection plaster 15mm thick in CM 1:3 admixed with appropriate Integral water proofing compound has to be applied on the walls.Admixture : SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO confirming to IS 2645. 102 Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika Plastocrete over the applied water proofing coating on horizontal surface.Admixture : SIKA Plastocrete Plus/FOSROC/ DR Fixit/ STP/CICO confirming to IS 2645.(kk) All the corners and joints should be pretreated with an elastic waterproofing sealing tape withy a wooven bonding mesh on each surface ab=nd an elastic expansions zonbe in the centre of Make Sika Seal Tape S/FOSROC/ Dr Fixit/ STP.(ll) The membrane has to be protected in accordance with the manufacturers recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturers recommendations.(mm) Waterproofing/Sunken floor treatment has to be carried out through applicators authorised by the respective manufacturers and approved by GE. 103 Supply and applying of crack bridging water proofing sealing tape, Sika deal F tape. 104 M & L 25mm thick cement concrete flooring type B-1, 1 :2 : 4, using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement. 105 M& L Cement concrete type E-2, 1:5:10 using 40mm graded aggregate in foundations filling and mass concrete as in sunken floor. 106 M&L for non-skid ceramic colouredtiles 7 to 8mm thickarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 15mm thick bedding layer CM 1:6complete all as specified. (Colour and shade as approved by Engr-In-Charge) 107 M&L for non-skid ceramic colouredtiles 7 to 8mm thickarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skriting set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 10mm thick rendering as backing coat of CM 1:4 complete all as specified. 108 M&L for vitrified ceramic tiles light shade 10 mm thick (Square/rectangular) polished m area of each tiles not exceeding 0.36 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm th screed bed in CM 1:6complete all as specified. (Colour and shade as approved by Engr-In-Charge) 109 M&L for vitrified ceramic tiles light shade 10 mm thick (Square/rectangular) polished m area of each tiles not exceeding 0.36 Sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering as backing coat of CM 1:4complete all as specified. (Colour and shade as approved by Engr-In-Charge) 110 M&L for coloured glazed tiles of size 450x300x7 mm thick in dados set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed. (Colour and shade as approved by Engr-In-Charge) 111 M&L for 50mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified 112 Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. 113 Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , canopies , deck slabs and in shelvesand the like complete all as specified and directed. 114 Mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape require including, cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed 115 Form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves landing and similar work not exceeding 200 mm thick (horzontal or sloping) and to edges of concrete complete all as specified and directed 116 Dismantling posts or struts embedded in concrete (wood, steel or R.C.C.) any section, including taking out embedded portion andmaking good disturbed ground 117 M & L for PCC (1:2:4) typeB-2 (using 40mm graded crushed stone aggregates ) lean concrete as in foundation, filling and mass concrete of post complete all as specified . 118 S&F rolled sections as in main and cross beams,hip and jack rafters,purlinswhere connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. confirming to grade Fe-410-W gde E-250 Quality A complete all as specified and directed by EIC. 119 S&F pre-painted galvatume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of colour (as approved by users) having tensile strength of 550 Mpa with powder coating 150 gm per sqm as in roof covering/cladding to walls,fixed with self tapping screws as specified and including dismantling old/Unsv sheets. 120 Supply& Fixingiron angle post and struts in fencing including cutting top to shape as direct drilling holes notching for wire etc, flat iron fillets (for screwing wire mesh etc) incl all necessary drilling bolting/bolts and nuts or reveting etc and similar work conforming to Fe 209 Gde E 165.. 121 Supply only MS galvanised chain link fencing n exc 4 Kg/Sqm 122 Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts etc including provision of binding wire 123 Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed. 124 S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde- E- 250) quality- A 125 M&L for repairing of R.C.C projections, chajjas, roofs, facia etc by necessary preparation. Scarpping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces with cement concreat (1:1.5:3) using 12.5mm graded crushed stone aggrigates and reinforcement with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 70mm including necessary form work and applyingtwo coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge. (Note : Welded mesh measured and paid seperately) 126 S&F 1.25 mm lath steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type. 127 S&F in repairs PVC Modular kitchen cabinet box type made of 18 mm thick PVC/WPC board of approximates 2.0 x 0.80 x 0.60 mtr incl all telescopic sliding channels, stainless steel handles, stainless steel knobs, stainless steel hinges, including atleast 01 x SS sliding plate rack, 01 x SS sliding Basket and 01 x SS sliding cutlery drawer etc complete all as sped and directed by Engr-In-Charge. 128 S&F in repairs PVC Modular kitchen cabinet box type made of 18 mm thick PVC/WPC board of approximates 1.20 x 0.16 x 0.60mtr incl partitions , front top hung glass shutters , SS hinges etc complete all as specified and as directed by Engr-In-Charge. 129 M&L for 20 to 25 mmthick machine in cut kota stone slab fortreads (Single piece stone) & landings of stair cases over and incl 15mm thick bedding layer CM 1:6with pigments to match the shade of slab including cutting, rubbing and mirror/granite finishpolishing complete all as specified and directed by Engr-in-Charge. 130 -Ditto-all as per itemNo: 6 above but on vertical surfaces such asriser (Single piece stone) etc over and incl 10 mm thick cement plaster in CM 1:4 at in back coat rough finished surface to receive tilescomplete all as specified. 131 Rounding/mouldingto edges of Kota stone slabs/marble stone/granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etccomplete all as specified. 132 Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors etc. 133 Taking down unserviceable Submain/Cableof any size as directed by Engineer-In-Charge. 134 Taking down main switch / DB as directed by Engineer-In-Charge. 135 M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistrandedcable as earth wire including sunken type pressed steel terminal boxes of thickness 1.6 mm thick and plastic laminated white / coloured top sheet cover 3.0 mm thick for:One light / fan/bell pointcontrolled by one, one way switch. 136 One 3 pin socket out let 5 Amps on same board. 137 One 3 pin socket out let 5 Amps on the independent board. 138 Dittoall as per item No.4 about but with 2.5/4.0 sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board/AC point as per item no. 25 complete all. 139 S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts, AC 140 S & F switch Piano 1 5 Amps, flush button type, SP, one way, 230 Volts, AC 141 S & Fsocket out let multipurpose 5 pin 5 Amps,230 Volts 142 S & Fsocket combination ,6 pin ,15 amps, flush type, multipurpose, 230 V 143 Supply and fix bell push flash piano type 5 amps complete all as specified and directed. 144 Supply and fix bell ding dong 230 Volts AC single pole complete all as specified and directed. 145 M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified. 146 Supply and fix MCB DB, TPN 4 way double door with suitable 200 amps rated bus bars , Neutral links , blanking plates conforming to Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens completeall as specified and directed. all as specified and directed. 147 S/F MCB TPN40Amps 415 volts as per Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens completeall as specified and directed. 148 Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type conforming to Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed. 149 Supply and Fixingstepped socket type electronic fan regulator and connecting up complete all as directed by Engineer-In-Charge. 150 M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings incl 12 W LED bulb complete all as specified and directed. 151 S&F in replacement LED tube light fitting 20Wbox type including LED lamp 20 W with 2200 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixturesand connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. 152 S & F SITC of high-quality integrated LED Street Light with a minimum system lumen of4750 Lm and system wattage not exceeding 45W with a nominal efficiency 105 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/ULaccredited lab to verify above parameters complete all as specified and directed.. Havells Cat noENDURASUNBEAMSL45WLED757SASYTOPCSENSO equivalent in Signify/Wipro 153 Supply & fixing decorative wall light fixture made up of polycarbonate/glass all as specified and directed. 154 Supply and fixed LED Bulk head light fitting cap 10 Watt all The luminaire should have a color CRI > 80, and CCT of 5700K. The luminaire shall be compliant with IP66 & IK 10 classification. Luminaire shall be designed to emit at least 1000 nominal lumens at a system efficacy of at least 100 lumen/watt with a maximum system wattage of 10 Wattsas specified and directed. 155 M & L for sub main wiring with two single core PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor , FRLS type cable drawn throughand including PVC concealed conduit of 20mm in size complete with all accessories alongwith provn of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. 156 M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn throughand including PVC concealed conduit of not less than 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.(Three runs of cable and one run of conduit shall be measured as one length) 157 M & L for sub main wiring with four single core PVC insulated and unsheathed cable 10 sqmm with multi stranded copper conductor , FRLS type cable drawn throughand including PVC concealed conduit of suitable size complete with all accessories alongwith provn of 2 run of 10 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. 158 Supply and Fixed single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed. 159 Taking down existing Ceiling fan/Exhaust fancapacity/type carefully and refixing the same with gutties, nuts boltss if required complete all as specified and directed. 160 Taking down existing Geyser any capacity/type carefully and refixing the same with replacement of PVC connection/Steel connection and anchor fastenerpipe if required complete all as specified and directed. 161 M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DBby means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I
Contract Date: Jan 30, 2026 Contract Value : ₹ 42.75 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Punjab View Result →
8.
Agriculture #9486868 Technical Bid
Tender For Competetive E-Bidding For Motor Fabrication & Errection Works - Mill House 2 Cutting of Cheveran Grooveson Mill Rollers 3 Cutting of pine apple grooves on Mill Rollers. 4 Replacement of weak/worn out Runners of cane carrier ,S.RC & IRC and cane unloader power supply angle 5 Welding of oval hole / enlarged holes of attachments of block type chain links and redrilling as per template/profile 6 Replacement of weak/ worn out attachment of block type chain links along with drilling as per template/profile and welding 7 Replacement of worn-out tail end boot of SRC& IRC 8 Fabrication and fitting of new juice rings for mill roller as per sample 9 Dismantling of worn out portion of square bar of long travel and cross travel there after grinding of base plate and fitting , leveling and alignment of new square bar of cane unloader 10 Welding on Wearout Mill and GRPF crown pinion teeth there after grinding of Teeth to make it as per profile 11 Dismantling ,Fabrication & erectionof weak/worn outMill Juice/ waterimbibitionsbox of compound imbibition system 12 Fabrication. & erection. of Mill rollerfeed & discharge bearing cover from 10 mm/ 8mm plate. 13 Fabrication & Erection of runner supporting box below runner at IRC, SRC & cane carrier, MBC and RBCand Bagasse elevator. 14 Replacement of worn out deflector plate and top plate of cane chopper/ cane leveler /Fibrizer by M.S. plate/ ss lining plates along with strengthening. 15 Dismantling ,fabrication & erection of worn out/ weak cane carrier chain side angle. 16 Dismantling ,fabrication & erection of return cane carrier chain supporting runner/chain guide. 17 Dismantling,Fabrication & Erection of worn out MS Plate of truck Tripler, SRC, IRC & cane carrier side plate. 18 Sprocket teeth repairing and strengthening with extra support of IRC/SRC/Elevator/MBC/RBC 19 Repair & hard facing of Auxiliary cane carrier Kicker /Pusher 20 Welding & Hard facing on wear out under feed roller teeth, Shell of roller and enlarging the length of roller as per standerd 21 Replacement of worn-out JuicePlate of screw conveyorat mill 22 Repair and hard facing on cane leveller/ chopper hubs 23 Lever bracket of underfeed roller scraper to be changed & to be fitted on as directed 24 Replacement and hard facing of worn out partition plate of anvil plate with 25 mm plate 25 Hot forging of enlarged / oval holes of cane carrier links to make them as per pre exhisting 26 Fabrication of 10” size Non return valve from M.S. Plate with fitting & leak proof trial. 27 Fabrication & erection of Rotary filter MS conical juice tank. 28 Repair of cane carrier slates such as worn-out side wear plates holes& other to be done 29 Fabrication & hard facing of under feed roller scrapper as per instructions to be done. 30 Welding on wear out teeth of cane carrier, S.R.C. & I.R.C. sprockets to bedone & teeth to be made as per profile 31 MS Ring to be fitted on worn-out both side of bagasse pusher at fibrizer& hard facing to be done on Square bars fitted 32 Welding of GRPF Scrapper teethto make them as per profile after hard facing and grinding 33 Repair & hard facing of cane UnloadedGrab Finger 34 Underfeed Roller pinion hard facing/welding 35 Repairing of MS Guard/ cover mill rollers crown pinion 36 Dismantling & fabrication of bagacillo screenas per instruction. 37 Dismantling of sprokets of SRC/IRC/Elevator etc. on drive/trail end shaft and fitting the same with successful trail 38 Rotary screen wornout support box replacement & accordingly strenthening its platform with successful trail 39 SS plates lining on the truff of IRC/ SRC and Mills Head Stock/GRPF Pressure Chute/Nose Plates/etc. 40 Fabrication & fitting of new fish plates of the GRPF pressure chute and also fitting/profile building of the bottom & top new/old scrappers of the same along with patching/linner of 5mm thick ss plate as per sample 41 Build up of oval/enlarged pin holes of links of block type chain and drilling of holes as per pitch or suitable to our pin 42 Patching/ repairing of weak/wornout portion of Cane Unloader No.2 cabinby new/old MS plate size 6mm plate along with proper strengthening 43 Fabrication & Erection of New SRC/IRC Racks as existing design 44 Repairing of old SRC/IRC racks 45 Repairing & hard facing of Fibrizer Hammers Shanks 46 Boiler House 47 Dismantling of C.I. feeding chute of 20 Ton Boiler & fitting of CI mouth-piece/ chute complete work 48 Dismantling fabrication & fitting of complete new casing of ID Fan with cone for Boiler (A) 20 ton boiler (B) 30 ton boiler 49 Dismantling fabrication & fitting of complete new casing of ID Fan with cone of Boiler. For 40 ton boiler 50 Fabrication & erection of weak portion of runner supporting box below at old MBC/New MBC/Cross carrier/ bagasse elevator. 51 Replacement of worn out/weak portion of Bottom trough & side plate of Old or New Main Bagasse carrier/ Bagasse Elevator/ cross carriers/ RBC/IRC by old/ new MS plates 52 Replacement of worn-out ducting dampers of I.D./ FD Fan, economizer/airheater inlet and outlet dempers with levers and bushes 53 Replacement of worn-out/weak portion of ducting of flue gas at diffirent places with new/old MS plate 54 Fabrication & fitting of bagasse/ash chute for new & old boilers with new/old MS plate 55 Reparing of wet scrubber shell demister of the 20, 30 & 40 Tons Boilerby new/old MS Plate/Flat 56 Fabrication & fitting of bagasse sliding gate for diffirent bagasse Carriers 57 Fabrication & Erection of the bagasse cillo impeller with satisfactory trial as per old sample or as directed 58 Dismantling ofboiler side wall/front wall sealing plate, economizer casingfor replacement of boiler tubes. Dismantled old plates to be fitted with minor repair/patching after replacement of boiler tubes. 59 Replacement/reversing of weak/wornout runners of new MBC /old MBC /bagasse Elevator /Cross Carriers & RBC etc. 60 Repairing of wearout drive/non drive end sprocket teeth by welding and grinding to make profile as per template of all bagasse carrier chains etc. 61 Repair of wornout/ weak boiler FD/ID Fan casing along with successful trial by old/new MS plate 62 Replacement of worn out blower casing of boiler D.M.Plant 63 Replacement of worn out bagasse blower casing at bagasse elevator as per sample or as directed 64 Complete hardfacing of ID Fan Impeller of 20/30/40 Ton boilers 65 Dis., Fab. & Erection of New Boiler I.D. Fan Expantion Joint 66 Dis. Cleaning , Repair & fitting of 20,30 & 40 Ton Boilers internal fitting, 67 Replacement of worn out hanging roof and arch structure of Beam/channel Size- 4”/5” of Boiler No.1 & 2 ofFarnace and detrick arch 68 Fabrication of Bagasse Feeding Jantra of Tractor 69 Fabrication & fitting of worn out / weak bagasse chute at belt conveyor 70 Reparing of Grade Bars of30/40 Ton Boilers 71 Replacement of worn out teeth of bagasse feeder rotating drum of boiler no-3,4 & 5 with satisfactory trial 72 Dismantling, fabrication & erection of ID. Fan blade with Base Plate, Ribs and suction cone.(A) 20 Ton Boiler (B) 30 Ton Boiler 73 Dismantling, fabrication & erection of ID. Fan blade with Back Plate, Ribs and suction cone.(C) 40 Ton Boiler 74 Fabrication & fitting of worn out chain supporting guide of new MBC /old MBC /bagasse Elevator /Cross Carrier & RBC etc. 75 Fitting of new 8mm thick MS plate ring on base plate of boiler ID fan impeller for strengthening 76 Dismantling,fabrication and fitting ofworn out portionof old feed tank ofBoiler No.1,2& 3 77 Replacement of worn out MS Beam and Channel arrangement Size- 4”/5” of Boiler No.1 & 2arch. 78 Dismantling,fabrication and fitting of safty valve worn out discharge assembly with proper support 79 Dismantling of 63.50mm OD X 2000mm long old weak/leaky air heater tubes of M/S LIPPI, make 40 TPH, Boiler no.- 04, Cleaning of tube plates, cleaning & fitting of tube plates holes, cutting as actual length of old tubes, Cleaning of outer surface of old tubes, fitting and erection of provided new/old tube, expanding of both ends of tubes in tube plates and finally leak proof testing of air heater. 80 Replacement of worn out MS Beam and Channel arrangement Size- 8/9 for supporting side wall and roof tubes of Boiler No.4 & 5. 81 Fabrication & erection of new racks for New MBC 82 Fabrication & erectionof new racks for old MBC 83 Fabrication & erectionof new racks for 3rd cross carrier chain 84 Repairing weak portion of racks of all bagasse carrier chains 85 Evaporator & Clarification House 86 Dismantling, cleaning ,repairing & refitting work of catcher internal elements of new Semikestner (2300 m2) with leak proof trial 87 Dismantling, fabrication & erection work of Evaporator body/ Semikestner/vapour shell complete with saveall of uttam quad set. 88 Major repair of save all of the evaporator body/Semikastner /vapour shell along with leak proof water and vacuum trail 89 Dismantling, fabrication & erection ofweak/ worn out partition plate of top and bottom header of juice heater and repairing of rubber strip holding grooves along with fitting of both cover , leak proof water and vacuum trial 90 Dismantling, fabrication & erection work of the sulphur furnace melter/melt receiver along with hydraulic tested steam coil with all connections and satisfactory trial 91 Dismantling, Fabrication & erection of sulphur furnace secondry cooler with its cooling coil and complete connection of water and associated pipe lines with satisfactory trial 92 Repairing of sulphur furnace secondry cooler by replacing bunch of cooling pipe by providing all its exhisting connection 93 Dismantling, fabrication & erection of Juice receiving bottle fitted at vacuum filter station by providing all its exhisting connection 94 Dismantling, fabrication & erection of weak / leak condenser at vacuum filter. 95 Dismantling, fabrication & erection of Muddy juice receiving tank complete with all connection & associated pipe lines along with leak proof trial 96 Dismantling, fabrication & erection of mud tray of vacuum filter 10’ X 20’ vacuum filter along with satisfactory trial 97 Dismantling, fabrication & erection weak mud agitator of 10’ X 20’ vacuum filter along with satisfactory trial 98 Dismantling, fabrication & erection of weak juice box of juice heater along with fitting of double beat valve and leak proof trial. 99 Dismantling Fabrication & fitting of weak/worn out portion of bagacillo pipe with MS/GI plate size 18 100 Dismantling , fabrication & erection of weak/ worn out portion ofclear juice Liquidation box along with leak proof trial 101 Dismantling, fabrication & erection of weak/ worn out clarifier mud boot along with leak proof trial 102 Disamantling,Fabrication & Erectionweak shell of compartment no. 1 & 2 of Juice clarifier (Big) Work of New DORR Dia 28 ,Capacity 3750 HL Body shell including completion of all connections & leak proof trial. 103 Disamantling,Fabrication & Erectionweak shell of compartment no. 1of Juice clarifier (Small) Work of New DORR Dia 24 ,Capacity 2550 HL Body shell including completion of all connections & leak proof trial. 104 Disamantling,Fabrication & Erection of weak shell of juice sulphiter 320 HL including complition of all connection & leak proof trial 105 Dismantling, fabrication & erection ofJuice catcher for Raw/vacuum/sugar melter /sulphitedJuice pumpswith suction/ delivery connection 106 Repairing of Juice Heater Condensate Bottle /Evaporator/Syrup receiving Bottle with leak proof testing partition plate with all connection. 107 RepairingofSO2 furnace sublimation pipe with its leaking Tower etc. with testing 108 Dismantling, fabrication & erection of vacuum filter mud mixer body & fitting of screw conveyor with proper alignment & satisfactory trial. 109 Fabrication & erection of screw conveyor as per old sample for mud mixture from 6mm thick plate with satisfactory trial. 110 Dismantling, fabrication & fitting of new down take of quad / Old or New semikestner, etc. 111 Dismantling, fabrication and erection of weak/ leaky recovery tower of juice sulphiter/ Syrup Sulphiter. 112 Repairing of Umbrella and Providing essential supports of Quad & Pan. 113 Dismantling, fabrication & erection of worn out Umbrella of Quad & Pan with Old/New Plates. 114 Dismantling, fabrication & erection ofsaveall ofQuad old bodies 115 Dismantling, fabrication & erection ofsaveall ofQuad Uttam set. 116 Replacement of worn-outtop conical portion ofQuad & Vapour Shell with save all proper strengthening with associated machinery 117 Dismantling of worn out arms and shell (outside & inside) of juice sulphiter drum, fabrication & erection with satisfactory trial. 118 Dismantlingof worn out central drum & bed of juice sulphiter, fabrication & erection with satisfactory trial. 119 To replace worn out clear juice box / mud discharge box with valve of new door followed by satisfactory trial 120 Dismantling ofworn outjuice heater cover, fitting of new 12 mm thick MS plate by welding & bolting including repair of lever & erection of cover followed by satisfactory water trial. 121 Replacement of wornout mud scrapper plate & fitting of mud scrapper at Vacuum Filter. 122 Disamantling,Fabrication & Erection of worn out juice baffel plate of Dorr compartment. 123 Fabrication & erection of new sulphur furnace having burning capacity of 140kg/hr & burning area 01Sqm.as per old sample & fitted with of all connections. Complete in all respect with water & Gas Trial. 124 Major repair of lime slaker with proper alignment & trial 125 Dismantling, fabrication & erection of Weak/Leaky After burner/Primary cooler vessel for So2 furnace.Complete in all respect with leak Proof Trial. 126 To replace worn out sulphur furnace header of size 8”/10” between after burner & Cooler. 127 Dismantling, fabrication & erection of ammonia pipe inside new/old Evaporator bodies. 128 Replacement of worn-out Stirrer arms of clarifier completed with all support and squeezers etc. 129 Replacement of partition plate of old door Compartment/Intermediate tray with 5/6 mm MS plate 130 Replacement of leaky cooling coil of C twin vertical crystalizer, B mono vertical cryst. with 3 size ms pipe with proper hydraulic testing and trial. 131 Dismantling, fabrication & erection of weak Portion Calandria shell of 700 Sqm. 5th Quad body of uttam set with leak proof water vacuum trial. 132 Repairing of B & C massecuite mono Cryst. Leakage coil with Hydraulic testing & successful trial. 133 Dismantling of existing 560 Sqm H.S. Area of Quad body first (Jagat Set Clandria ) Providing the Support for Stay the Shell above Calandria,Unloading of New Clandria from Vehicle by their resources shifting of new Calandria at the site. Fitting and Erection of Calandria at the Place of Old Clandria with Shell fitting of bottom cone of Calandria inlet Vapour/Exhaust steam Connection, water line connection and making all other connection to run the body complete in all respect. 134 Dismantling the existing Vapour Pipe between Uttam Quad Set Body No 2 & 3 along with Right angle valve correcting the size of vapour inlet nipple of body no 3 as per right angle valve, fitting of right angle valve on nipple of vapour entry to 3rd body and making the new provision of vapour pipe from out going vapour line of FFE to right angle valve along with leak proof trial. 135 Fabrication of New tank and fitting of vertical stirrer along with drive for melting of Brown sugar .Fabrication & fixing of new bed and fitting of pump & motor for lifting of melt along with all connections as directed and satisfactory trial of system. 136 Fabrication and fitting of M.S. structure and laying out & fixing of G.I. sheet for over head covering of moulding hearth complete in all respect. 137 Pan House 138 Repairing of down-take of Pan for 40/50 Ton Pan 139 Repairing of down-take of Pan for 60/80 Ton Pan 140 Replacement of worn out/broken angle arms of crystallizer & replacing of paddel type arms with ribbon type of air cooled/vaccume cryst. 141 Dismantling of Gutter of Molasses Magma & massecuite. 142 Fabrication & fitting of Gutter of Molasses, Magma & massecuite. 143 Repairing of hinge type cover of Gutter 144 Replacement of worn-out condensate box of pans, quad & juice heaters 145 Dismantling Fabrication & fitting of new umbrella in pans with supports & J pipes 40/50 Ton pan 146 Dismantling Fabrication & fitting of new umbrella in pans with supports & J pipes 60/80 Ton pan 147 Repairing of umbrella of Pans with supports & J pipes 40/50 Ton pan 148 Repairing of umbrella of Pans with supports & J pipes 60/80 Ton pan 149 Replacement of worn out distributor by new for 40/50 Ton Pan 150 Replacement of worn out distributor by new for 60/80 Ton Pan 151 Repair of wornout/ broken Arm/ Ribbon of air cooled, vacuum & seed crystallizer 152 Replacement of weak sight glasss flanges of Pan & Evaoparated Body along with leak proof water and vaccuum trial. 153 Dismantling , fabrication & erection of 40 Ton pan complete body shell along with save all, umbrella, feed header, top taper cone , distributor,man hole ,sight glasss flanges,all pipeline connections with 12/10mm MS plate with leak proof water and vaccuum trial. 154 Replacement of complete worn-out/ weaktop cone of 40/50 TonPan by new withsupports and strengthening of associated machinery parts proper along with leak proof water and vacuum trial. 155 Replacement of complete worn-out/ weaktop cone of 60/80 TonPan by new withsupports and strengthening of associated machinery parts proper along with leak proof water and vacuum trial. 156 Strengthening of 40/60 Ton Pan body &Taper Portion with channel etc. 157 Replacement of worn out bushes of air cooled crystallizer of both side after dismantling all drive arrangement (worm wheel, reduction gear) and there after fitting ,alignment after replacement of bush (bush will be provided by factory) 158 Dismantling Fabrication & Erection of Box type feed header for each Pan with all related connections including valves, nipples,flanges etc. 159 Dismantling Fabrication & Erection of weak portion of pan shell with 12mm MS plate along with leak proof water & vacuum trial. Welding must be double coated from outside & inside. 160 Replacement of weak/wornoutside & bottom plate of cold/hot water over head tank, syrup tank & Molasses storage tanks at pan station by providing proper strengthening 161 Fabrication & erection of complete new down take of 40/50 ton pan along with leak proof water and vacuum trial 162 Fabrication & erection of complete new down take of 60/80 ton pan along with leak proof water and vacuum trial 163 Repairing of weak/worn out save-all of 40/50 Ton pan along with leak proof water and vacuum trial 164 Dismantling, fabrication and erection of pan save all with proper trial 40/50 Ton along with leak proof water and vacuum trial 165 Dismantling , fabrication & erection of 80 Ton pan complete body shell along with save all, umbrella, feed header, top taper cone , distributor,man hole ,sight glasss flanges,all pipeline connections with 16mm MS plate with leak proof water and vaccuum trial. 166 Dismantling, fabrication and erection of 60/80 Ton pan save all along with leak proof water and vacuum trial 167 Repairing of weak save-all of60/80 Ton pan along with leak proof water and vacuum trial 168 Repairing/patching of weak portion of roof of molasses tank no 1 & 2 169 Dismantling,Fabrication & Erection of Wornout Portion of the Chute for Pan Discharge Valve with Satisfactory trial. 170 Repairing / patching of weak body shell of molasses conditioner along with alignment of reduction gear box and motor. 171 Disamntling,fabrication & fitting work of 80Ton Pan save all internals 172 Dismantling , fabrication & erection of 80 Ton pan partial weak body shell and complete top taper cone along with save all, umbrella, feed header , distributor,man hole ,sight glasss flanges,all pipeline connections with 16mm MS plate providing supports to associate machinary along with successful water & vaccuum trial. 173 Centrifugal House 174 To replace worn-out molasses Jacket of B & C Continuous Centrifugal Machine with proper Trial. 175 To Replace worn-out Molasses Casing of “A” Centrifugal Machine followed by satisfactory trial. 176 Replacement of worn out portion of horizontal sugar melter shell with steam & juice connection followed by leak proof trial. 177 Dismantling ofexisting stirrer shaft of magma mixture of B/C Continuous machine Straightening of worn out shaft, replacement of Bushes, re-fitting of shaft, arms and alignmrnt of drive system with satisfactory trial. 178 Replacement of weak/worn out portion of sugar hopper. 179 Broken Shaft of Cryst. to be made correct or replaced by new one.Alignment is to be done afterproper ftting of arms and ribbon . 180 Replacement ofworn-outbushes & Arms of Sugar Melter with satisfactoty trial. 181 Replacement of weak/leaky suction pipe of MF- 50X50/ 40X40 injection & spray pump as per old sample.Making and fitting of stone catcher.Fitting of Pipe with Pump. 182 Dis.,fab. & Erection of weak body shell of pugmill, melter & Magma Mixer of A, B & C FW/AF C/f Machines. 183 Dis. & Fitting work of bushes of melter, Magma mixer & sugar elevator. 184 Replacement ofworn- out/weak molasses ring along with Fingure of WK-1500 C/F machine complete in all respect. 185 Dis.,fab. & Erection of New. Fan ofE.T.P. aerator 186 Disamntling,fabrication & fitting work of structure including rubber scrapper drum of ETP clarification Pit. 187 Fabrication,Erection and Fitting work of Spray Pond mesh type inlet channel stainer Size-2.5mtx2.5mt 188 Disamantling,Reapiring & Re-fitting with leak proof trial of Collapsed SS Venturi of Pan no.10 Condensor. 189 Dismantling ,Fabrication & Erection of weak/wornout delivery Pipe of injection pump having one end reducer. 190 Disamantling,fabrication & fitting work of injection header Suction Pipe Mesh type Stainer. 191 Replacement of existing C.I. Sluice type Cutover Valve by Rubber seated right angle type valve. 192 Replacement of worn out channel after De-grouting & Re-fitting of A4/A5 side hopper no. 04new Channel,Clit insize 4 X4 fitting of wooden strip. 193 Replacement ofworn out/broken padestal arms of magma mixture & pug mill. 194 Replacement ofweak/wornout Perforated Sheet of hopper & fitting with frame 195 Dismantling Fabrication and erection of air diffuser for ETP from old boiler tubes 196 Replacement of worn-out bed/base plate of sugar exiter with proper strengthening of old grader. 197 Replacement of damaged /worn-out arms of mono crystillizer 198 Dis.,fab. & Erection of MS Coil of 1 dia for WK-1500 & SC1350-KT C/F Machine with 3mm perforation. 199 Dis.,fab. & Erection of New Molasses storage tank(1.5mtr dia X 1.5mtr height) with 08mm MS Platefor A Centrifugal Machine and Providing with all connection,nipples etc. 200 Dismantling of existing Gate type masscuite taking valve 1250 Batch type machine & fitting of Pneumatic type Butterfly valve inplace of above & make in all necessary provision with satisfactory trial. 201 Dis.,fab. & Erection of wornout/weak Conical Discharge Chute for Contniuous machine with 06mm New/Old Plate (as per sample). 202 Dismantling of M/S Backawwolfmake SC-1350 KT continuous C/F Machine along with Motor,Panel,Base Plate & Other accessories & keeping the all dismantled equipment/accessories as directed. 203 Disamntling of M/S Balchand Nagar make WK-1500 C Fore Worker Machine No.1 including Machine,Motor,Panel & Other accessories.Shifting this machine at place of dismantled C after work Machine No.2 making the provision in structure to suite for fitting of this Machine.Fitting & Erection of this machine along with all related works like modification in structure,raising the height of Pug Mill if requird,Providing all connection along with satisfactory trial of the machine. 204 Unloading the New 1500 mm Basket Dia M/S Balchand Nagar/Thyssen Krupp make Continuous centrifugal Machine along with accessories from Vehicle and shifting of Machine all accessories at the site of installation making necessary alternation in existing structure as per suitabilty of new machine.Erection & Commissioning of new machine and accessories like Motor,Panel,Lubrication System etc.Making all Connection as per drawing or machine manual & satisfactory load trial of machine. 205 Dismantling Fabrication & fitting of man hole of vertical crystallizer 206 Dismantling of existing WIL make 1250Kg/charge capacity machine no 2 & 3 along with all accessories and motors & panel shifting and keeping of these machines and motors at directed place. Shifting and re-fitting of existing pug mill after shortening its length and suitable for one no 1250 Kg/charge machine. 207 Unloading of New 1750 Kg/charge machine along with all accessoriesie . motor , panel etc from vehicle. Strengthening the existing column 2 base structure of dismantled 1250 Kg/charge machine making essential modification in existing structure to suit the foundation of new machine ,Erection of new 1750 Kg/charge machine in all respect , fitting & commissioning of new/old pug mill as suitability to new machine, shifting & fixing of new drive control panel ,providing the all connection to new M/C as per drawing / manual and satisfactory commissioning of new machine in all respect. 208 Schedule Work Dismantling , fabrication & erection of MS pipe/ blind/flange/nipple/reducer/elbow/bend/tee etc upto 12 dia 209 Dismantling of M.S. Pipe Line including bend/flange etc Upto 12” dia 210 Fabrication & Erection of M.S. Pipe Line upto 12” dia 211 Dismantling ,fabrication & Erection of Bend upto 12” dia (MS) 212 Dismantling ,fabrication & Erection of Nipple upto 12” dia (MS) 213 Dismantling ,fabrication & Erection of Cross upto 12” dia (MS) 214 Dismantling ,fabrication & Erection of Tee upto 12” dia (MS) 215 Dismantling ,fabrication & Erection of Flange upto 12” dia (MS) 216 Dismantling ,fabrication & Erection of Blind upto 12” dia (MS) 217 Dismantling ,fabrication & Erection of Reducer upto 12” dia (MS) 218 Dismantling ,fabrication & Erection of Elbow upto 12” dia (MS) 219 Dismantling , fabrication & erection of SS pipe/ blind/flange/nipple/reducer/elbow/bend/tee etc upto 12 dia 220 Dismantling ,fabrication & Erection of Bend up to 12” dia (SS) 221 Dismantling ,fabrication & Erection of Nipple up to 12” dia (SS) 222 Dismantling ,fabrication & Erection of Cross up to 12” dia (SS) 223 Dismantling ,fabrication & Erection of Tee up to 12” dia (SS) 224 Dismantling ,fabrication & Erection of Flange up to 12” dia (SS) 225 Dismantling ,fabrication & Erection of Blind up to 12” dia (SS) 226 Dismantling ,fabrication & Erection of Reducer up to 12” dia (SS) 227 Dismantling ,fabrication & Erection of Elbow up to 12” dia (SS) 228 Dismantling & fitting of valve upto 12 dia 229 Dismantling of valve up to 12” dia 230 Fitting of valve up to 12” dia 231 Dismantling fitting of valve above 12 dia 232 Dismantling of valve above 12” dia 233 Fitting of valve above12” dia 234 Dismantling Fabrication & fitting of man hole 235 Dismantling , fabrication & erection of MS pipe/ blind/flange/nipple/reducer/elbow/bend/tee etc above 12 dia 236 Dismantling ,fabrication & Erection of Bend above 12” dia 237 Dismantling ,fabrication & Erection of Nipple above 12” dia 238 Dismantling ,fabrication & Erection of Tee above 12” dia 239 Dismantling ,fabrication & Erection of Flange above 12” dia 240 Dismantling ,fabrication & Erection of Blind above 12” dia 241 Dismantling ,fabrication & Erection of Reducer above 12” dia 242 Dismantling ,fabrication & Erection of Elbow above 12” dia 243 Dismantling of M.S. Pipeabove 12 “ dia 244 Fabrication of M.S. Pipe above 12” dia 245 Erection of M.S. Pipe above 12” dia including bend flange & nipple etc. 246 Dismantling of old worn-out Platform 247 Fabrication & erection of platform by using old plate 248 Fabrication & erection of Cat/monkey Ladder 249 Fabrication & erection stair case 250 Fabrication & erection of railing from old Material 251 Fabrication & erection of railing from old Material 252 Fabrication & erection of T ring for strengthening of evaporator /Pan vapour Pipe 253 Dismantling ofS.S. Pipe Linewith bend & flange upto 12 dia 254 Fitting of S.S. Pipe Line with bend & flange upto 12 dia 255 Dismantling of MS heavy structure / Tank 256 Dismantling of MS Light structure 257 Fabrication & Erection Light structure 258 Fabrication & Erection heavy structure 259 Fabrication of Pump bed with Pump, Reduction gear & motor alignment up to 30 H.P. 260 Fabrication of pump bed with pump, reduction gear box & motor alignment above 30 HP 261 SS Plate lining in different size for various equipments. 262 Dismantling & cleaning of MS Pipe Line with bend, flange , nipple etc. 263 Fitting of MS pipe line with bend, flange ,nipple etc after cleaning 264 Fabrication & Erection ofcomplete Square / Rectangular /Round Tank with conical Bottom 265 Fabrication & fitting ofMS Coil (coils are to be duly bend and not offset pipe welding .Offset welds shall not be treated as coils but as pipes ) 266 Fabrication & fitting ofSS Coil 267 Welding work for various equipments in B/H 268 Dismantling , Fabrication & fitting ofnew Coneand umbrella anywhere in the factory. Cone up to 01 Mtr. Dia 269 Dismantling, Fabrication & fitting of new Coneand umbrella any where in the factory.Cone above 01 Mtr. Dia upto 2.5mtr dia. 270 Dismantling , Fabrication & fitting of new Coneand umbrella any where in the factory, Cone above 2.5 Mtr. Dia 271 Fabrication and Patchwork of equipmentsusing old/ NewMS plateby 6/8 mm thick plate overround vessels/any vessels 272 Dismantling ,Fabrication & erection of Carbon steel seamless steam Pipe A-106 Grade BLine including bend/flange etc size -219.1mm OD (8 NB)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 3
Uttar Pradesh View Result →
9.
Defence #9427422 Technical Bid
Tender For Term Contract For B And R Works For Hq Igar (E) At Srikona; Builders Hardware & Joinary Items (Doors, Windows, Latches, Mortice Locks) 1. PVC,UPVC Door Window and Chowkhats Rajshri Plastiwood, Fenesta, Encraft, Supreme, Duroplast, H2O, Crown Industries 2. FRP Doors Syntex, Jain Wood Industries (Jayna), Delux Poly Fab 3. Factory made Wooden Panelled Flush Doors and Windows Kitply, Ambika Timber Woods, Premier Wood Crafts, Jain Wood Industries (Jayna) 4. Steel Roller Door/Shutters Dura Roof, Swastik Rolling, Metal King, Gandhi Automation Pvt Ltd, Decogrile, Wellroll 5. L-Drop, Latches, Hasp, Staples Dorset, Godrej, Kich,Ozone, Crown 6. Aluminum Anodised Powder Coated Doors,Windows,Frames,Partition Jindal, Kalco, Alpure, Crown, Hindalco 7. Float/Reflective Glass Saint Gobain, ASAHI, Modi Guard 8. Aluminium/Zinc Composite Panels Alcobond, Reynobond, Alcomax, Durabuild All Types of Plywoods, Veeners, Laminates, False Ceiling, Wooden Board Sheets, Wooden Floors 1. PVC False Ceiling Syntex, Armstrong, Duroplast, Rajshri Plastiwood, H2O 2. Gypsum Silicate Tiles in False Ceiling/Wall Lining Armstrong, Everest, India Gypsum, Aerolite, Hilux, Gyproc, Ramco Industries 3. Mineral fibre False Ceiling Gyproc, Armstrong, Llyod Insulation, Kingston, Aerostone 4. Plywood, Pre Laminate Plywood,Veenered Decorative Plywood,Fire Retardant Plywood Greenply, Kitply, Duratuff, Ecoboard, Decoboard 5. Veenered Plain Particle Board Greenply, Kitply, Duratuff, Ecoboard, Decoboard Sanitary Fittings and Fixtures 1. Wash Basins/EWCs/IWCs/Urinals ( Vitreous China) Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 2. Concealed Cisterns Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 3. Normal/Dual Flow Flushing Cisterns Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd,Somany, Duravit, Roca, Coronet 4. PVC/Acrylic Toilet Mirror Cabinet Saint Gobain, ASAHI, Modi Guard, Coronet 5. Chromium Platet Towel Ring,Towel Rack,Towel Rail,Soap Nitch, Tissue paper Holder Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca 6. Toilet Seat Cover Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 7. Shower Panel Grohe, Jaquar, Cera, Kohler, Hindware, Lauret, Coronet 8. Chromium Plated Bath Fittings and Fixtures Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 9. PTMT Bath Fittings Polytuff, Cera, Prayag, Commander 10. Kitchen Steel Sink & Rack Jainco, Cera, Prayag, Coronet, Shakti , Silvershine, Nirali 11. HDPE/UPVC Tanks, Overhead Tanks, HDPE STP tanks, SMC panel Tank Sintex, Supreme, Prayag Polymers Pvt Ltd, Prince, Coronet All Types of Paints 1. Acrylic Washable Distemper/Oil Bound Distemper (Interior) Berger, Nerolac, Asian, Jenson & Nicholson, Dulux, Shalimar 2. Interior Acrylic Plastic Emulsion Paints Berger, Nerolac, Asian, Jenson & Nicholson, Dulux 3. Synthetic Enamel Paint Berger, Nerolac, Asian, Jenson & Nicholson,Dulux, Shalimar 4. Cement Based Paint Berger, Nerolac, Asian, Jenson & Nicholson, Snowcem 5. Exterior Acrylic Emulsion Weather Coat paints Asian, Dulux, Berger, Shalimar, Nerolac 6. French Polish Berger, Nerolac, Asian, Jenson & Nicholson 7. Thermoplastic Road marking Paint Asian (Apcomark), STP, Berger, Shalimar, Jenson & Nicholson 8. Water Based Road marking Paint Asian (Apcomark), STP, Berger, Shalimar, Jenson & Nicholson 9. Acid Resistant Paint Asian, Berger, Shalimar 10. White Cement/Wall Putty Birla White, Asian, Berger, Shalimar, JK White All Types of Wall and Floor Tiles 1. Vitrified tiles/Ceramic/Glazed Wall and Floor Tiles Kajaria, Somany, Asian Granito, Cera, Orientbell, Nitco Ltd, RAK Ceramics,Varmora, Quotone, Johnson 2. Precast Concrete Interlocking Paving/Chequred Paver Blocks Nitco, Mehtab Tiles, Ultra Tiles, Terra Firma, Nulite 3. Wooden Laminated Floor Tiles/Wooden Floor/Parquet Tiles Vista, Pargo, Armstrong&Bruce, Greenply 4. Acid Resistant Vitrified Tiles Johnson(Endura), Somany(Durastone), Kajaria, Duracrete 5. Wooden Laminated Flooring/Vinyl Flooring/Rubber Flooring Greenlam, Pargo, Action Tesa,Unitex, Epitome
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Assam View Result →
10.
Defence #9424048 Technical Bid
Tender For E&M Term Contract (Tc) For Bn Hq Kiphire, Cob Akhegwo & Cob Pungro Of Ar Bn At Kiphire.; Builders Hardware & Joinary Items (Doors, Windows, Latches, Mortice Locks) 1. PVC,UPVC Door Window and Chowkhats Rajshri Plastiwood, Fenesta, Encraft, Supreme, Duroplast, H2O, Crown Industries 2. FRP Doors Syntex, Jain Wood Industries (Jayna), Delux Poly Fab 3. Factory made Wooden Panelled Flush Doors and Windows Kitply, Ambika Timber Woods, Premier Wood Crafts, Jain Wood Industries (Jayna) 4. Steel Roller Door/Shutters Dura Roof, Swastik Rolling, Metal King, Gandhi Automation Pvt Ltd, Decogrile, Wellroll 5. L-Drop, Latches, Hasp, Staples Dorset, Godrej, Kich,Ozone, Crown 6. Aluminum Anodised Powder Coated Doors,Windows,Frames,Partition Jindal, Kalco, Alpure, Crown, Hindalco 7. Float/Reflective Glass Saint Gobain, ASAHI, Modi Guard 8. Aluminium/Zinc Composite Panels Alcobond, Reynobond, Alcomax, Durabuild All Types of Plywood‟s, Veneers, Laminates, False Ceiling, Wooden Board Sheets, Wooden Floors 1. PVC False Ceiling Syntex, Armstrong, Duroplast, Rajshri Plastiwood, H2O 2. Gypsum Silicate Tiles in False Ceiling/Wall Lining Armstrong, Everest, India Gypsum, Aerolite, Hilux, Gyproc, Ramco Industries 3. Mineral fibre False Ceiling Gyproc, Armstrong, Llyod Insulation, Kingston, Aerostone 4. Plywood, Pre Laminate Plywood,Veenered Decorative Plywood,Fire Retardant Plywood Greenply, Kitply, Duratuff, Ecoboard, Decoboard 5. Veenered Plain Particle Board Greenply, Kitply, Duratuff, Ecoboard, Decoboard Sanitary Fittings and Fixtures 1. Wash Basins/EWCs/IWCs/Urinals ( Vitreous China) Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 2. Concealed Cisterns Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 3. Normal/Dual Flow Flushing Cisterns Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd,Somany, Duravit, Roca, Coronet 4. PVC/Acrylic Toilet Mirror Cabinet Saint Gobain, ASAHI, Modi Guard, Coronet 5. Chromium Platet Towel Ring,Towel Rack,Towel Rail,Soap Nitch, Tissue paper Holder Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca 6. Toilet Seat Cover Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 7. Shower Panel Grohe, Jaquar, Cera, Kohler, Hindware, Lauret, Coronet 8. Chromium Plated Bath Fittings and Fixtures Grohe, Toto, Jaquar, Cera, Hindware, Parryware, Prayag Polymers Pvt Ltd, Somany, Duravit, Roca, Coronet 9. PTMT Bath Fittings Polytuff, Cera, Prayag, Commander 10. Kitchen Steel Sink & Rack Jainco, Cera, Prayag, Coronet, Shakti , Silvershine, Nirali 11. HDPE/UPVC Tanks, Overhead Tanks, HDPE STP tanks, SMC panel Tank Sintex, Supreme, Prayag Polymers Pvt Ltd, Prince, Coronet All Types of Paints 1. Acrylic Washable Distemper/Oil Bound Distemper (Interior) Berger, Nerolac, Asian, Jenson & Nicholson, Dulux, Shalimar 2. Interior Acrylic Plastic Emulsion Paints Berger, Nerolac, Asian, Jenson & Nicholson, Dulux 3. Synthetic Enamel Paint Berger, Nerolac, Asian, Jenson & Nicholson,Dulux, Shalimar 4. Cement Based Paint Berger, Nerolac, Asian, Jenson & Nicholson, Snowcem 5. Exterior Acrylic Emulsion Weather Coat paints Asian, Dulux, Berger, Shalimar, Nerolac 6. French Polish Berger, Nerolac, Asian, Jenson & Nicholson 7. Thermoplastic Road marking Paint Asian (Apcomark), STP, Berger, Shalimar, Jenson & Nicholson 8. Water Based Road marking Paint Asian (Apcomark), STP, Berger, Shalimar, Jenson & Nicholson 9. Acid Resistant Paint Asian, Berger, Shalimar 10. White Cement/Wall Putty Birla White, Asian, Berger, Shalimar, JK White All Types of Wall and Floor Tiles 1. Vitrified tiles/Ceramic/Glazed Wall and Floor Tiles Kajaria, Somany, Asian Granito, Cera, Orientbell, Nitco Ltd, RAK Ceramics,Varmora, Quotone, Johnson 2. Precast Concrete Interlocking Paving/Chequred Paver Blocks Nitco, Mehtab Tiles, Ultra Tiles, Terra Firma, Nulite 3. Wooden Laminated Floor Tiles/Wooden Floor/Parquet Tiles Vista, Pargo, Armstrong&Bruce, Greenply 4. Acid Resistant Vitrified Tiles Johnson(Endura), Somany(Durastone), Kajaria, Duracrete 5. Wooden Laminated Flooring/Vinyl Flooring/Rubber Flooring Greenlam, Pargo, Action Tesa,Unitex, Epitome All Types of Pipes 1. UPVC/PPR/HDPE Pipes for Sewerage Jain Irrigation, Kisan, Prince, Supreme, Oriplast, Finolex, Diplast, Reliance, Tirupati, Prayag, Plasto, Astral, Dulet, Coronet 2. PVC Soil/Waste/ Rain Water (SWR) Pipe & Fittings Jain Irrigation, Kisan, Prince, Supreme, Tusker, Reliance, Oriplast, Prayag, 3. CI Centrifugally Cast (spun) Pipes & Fittings Neco Centri, Jindal, Tata Metallic, Srikalahsti Pipes Ltd, Singhal Iron Foundary, HEPCO, Keshav, Jai Balaji Industries 4. CI Pipes & fittings Electrosteel, Kesoram, Tisco, NECO, Kalinga 5. DI Pipes and fittings Jindal Saw Ltd, Electrosteel Casting Ltd, Tata metalics 6. ERW/ MS pipes/ GI Pipes Tata, Jindal Steel, Prakash, Zenith, Bansal, Swastik, BST, Neozone, Newzone Tubes Ltd 7. PPR Pipe SFMC, Prince, Finolex, Fusion Road Work 1. Bitumen of various VG-Grades Indian Oil, Hindustan Petroleum Corporation, Shell 2. Road Furnitures (Cat eyes,Blinkers,Delineators,Polycarbonate Convex Mirrors, Speed Breakers, Bollards 3M, Vertex, Alcolite, Cateye, Avery Denison, Shetal 3. Road Barricades/Metallic Crash Barriers 3M, Avery Denison, Shetal, Shakti Miscellaneous 1. PUF Panels/PEB TATA Nest, Cactus, Epack, Pronto, Banal Prefab, Lloyd, Sintex 2. Modular Furniture Durian, Godrej Interio, IKEA, Zuari, Featherlite 3. Auditorium Chairs Godrej Interio, Durian, Ergoflex, Featherlite 4. Various types of Fences (Chain Link,Anti cutting) TATA Wiron, A1 Fence 5. Prepainted Galvalume/Corrugated Galvanised/Colour Coated Galvalume Sheet SAIL, Tata Steel, Jindal Steel, Duraroof 6. APP Membrane Sika, Asian Paints, Supreme, Duraprotector 7. PBS Roll STP Ltd, Armstrong Chemicals Pvt Ltd, Supreme Sales 8. Admixture Pidilite, Fosroc,Cico, Sika, BASF 9. Rolling Shutters Navair Ltd, Shakti Hormann Pvt Ltd, Iclean All Types of Cables/Conductors 1. HT XLPE Cables Cable Corporation of India, Finolex, Havells, RR Kabel, KEI, Polycab , Legrand, L&T, Philips 2. Cable Joint HT Hot and Cold Shrinkable/Push On Type Denson, Raychem, Cabseal, M-Seal, Birla 3M 3. ACSR (Aluminum conductor steel reinforcement)Conductor VK Conductors, M/S Konark, Ujala, Bharat Power Cables, Indconductor 4. Cable LT (PVC/XLPE) HavelIs India Ltd, KEl Industries Ltd, Anchor, Wipro, Plaza, Polycab , Legrand, L&T, Philips 5. Wiring Cable (FRL/HR FRLS) HavelIs India Ltd, KEl Industries Ltd, Anchor, Wipro, Plaza, Polycab, L&T, Philips 6. Point wiring accessories i. e Switch/ Sockets/Bell Push/Ceiling Rose/ Call beIl/Lamp Holder Havells, Anchor, KEI, Wipro, Legrand, Schneider Electric, L&T, Philips All Types of Fittings 1. Flame Proof Lights Fittings Switches Fans/ Exhaust Fans/Switches Sockets Havells, Anchor, KEI, Wipro, Legrand, Schneider Electric, L&T, Philips, Crompton & Greaves, RR Kabel, Surya Roshni 2. High Mast Lights Wipro, Bjajaj, Crompton & Greaves, Philips 3. Street Light, Halogen Lights,Security Lights Havells, Wipro, Philips,Crompton & Greaves, GE, Orient Electric, Bajaj Roshni 4. Fluorescent Tube Rod Asian, HPL, GE, Osram, Surya Roshni, Bajaj, Havells 5. Bulk Head Fitting Havells, Crompton Greaves, Bajaj, Philips, GE All Types of Switch Gears 1. HT switch Gear 11 KV, 66 KV,3 KV, VCB/ SFB Indian Transformers & Electricals, Siemens, Andrew Yule, BHEL, C&S, GE/ CG 2. Air Circuit Breaker (AC B) HT/LT 600 Volts / LT ACB 415 V olts ABB, Siemens, Havells India Ltd, Crompton Greaves, Schneider Electric, Legrand, L&T, Hagger , Philips 3. HT Ring Main Unit, VCB, ITE, 11 KV Siemens, C & S, CG, Schneider 4. MCCB/ MCB/RCB Larsen & Toubro, Siemens, Havells, Schneider, Siemens 5. DB Havells, Anchor, GE, ABC Electricals, Legrand, Schneider Electric, L&T, ABB, Siemens 6. Rising Main/ Bus Key trunking Sandwitched Busbar Schneider, C & S, Siemens, Larsen & Toubro 7. CTs/PTs AE, Siemens, L&T, Areva, Crompton Greaves 8. Panel (Powder Coated) , Amf Panel/Automatic Power Factor Control Panel CPRI Approved C& S, ESS ESS KAY, L & T, Crompton 9. Protection relays ABB, L&T, GE, Schneider, Siemens, Mitsubishi Electric 10. Capacitors with relay L&T, Schneider Electric, Siemens, GE (General Electric), Havells, ABB, Crompton Greaves DG Sets 1. Engine Cummins, Ashok Leyland, Mahindra, Kirloskar, Greaves, Caterpillar Inc., MTU (Rolls-Royce PLC) Perkins Engines Company Limited 2. Alternator Kirloskar Green, Jackson, Crompton Greaves, Cummins, Caterpillar, MTU (Rolls-Royce PLC) Perkins Engines Company Limited 3. Amp meter/ Volt meter/ Frequency meter ABB, Siemens, Havells, Secure, L&T 4. Energy Meter (Tamper Proof) Anchor, Havells, Legrand, L&T Transformers 1. Transformers 11 KV Distribution Type Step/down but above 500 KVA Capacity Siemens, ABB, Schneider, Alstom, Bharat Bijlee, Indian Transformers & Electricals 2. Transformers 11 KV Distribution Type Step/down but above 500 KVA Capacity BHEL, ABB, Siemens, Schneider, L&T 3. Packaged/Unified Sub-Station BHEL, ABB, Siemens, Schneider, L&T 4. Servo Control LT Voltage Stabliser/Isolation Transformer Andrew Yule, AE, V-Guard, Aplab 5. HT Voltage Stabliser (11 KV) Andrew Yule, Kirloskar 6. GOD Switches BHEL, Jaypuria Brothers, Atlas, Stelmec Central AC Plants 1. Chiller Units/Compressors, Scroll/Screw type Blue Star, Voltas, York, Kirloskar, Carrier, Daikin 2. Condensor and Chiller Pumps Crompton Greaves, Kirloskar, ABB, Mather & Platt 3. AHU Blue Star, Voltas, Llyod, Carrier 4. Split Type/Package type/Window type AC Lloyd, O-Generali, Hitachi, Daikin, Carrier, Blue Star Lifts 1. Lifts Otis, Schindler, Kone,ThyssenKrupp Water Supply Items 1. Submersible Pumps Havells, Crompton,Kirloskar, CG Power, CRI 2. Sluice Valves, Gate Valves, Pressure Valves, Non return Valves Zolotov, Honeywell, Amco Industrial Miscellaneous 1. Inverters Okaya, Livguard, V-Guard 2. Batteries Exide, Amaron, Luminous, LivGuard, V-Goard 3. Geysers Water Heater all capacities
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Nagaland View Result →
11.
Housing Urban and Rular Development #8667568 AOC
Tender for Atal Bus Stand (C Type) At Rampur Under M.Rampur Block, Kalahandi.-- 1 CVL 2 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 3 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 4 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 5 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 6 First Floor 7 Second Floor 8 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 9 First Floor 10 Second Floor 11 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 12 First Floor 13 Second Floor 14 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 15 50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor 16 First Floor 17 50000076 Plinth protection with side brick masonry wall (1:4) inside sand filling over which 100 mm thick cement concrete using 40 mm coarse aggregate in prop (1:3:6) and over that, 50 mm thick cement concrete using 12mm to 19mm coarse aggregate in prop (1:2:4) with cement plastering (1:4) in proper slope. Ground Floor 18 50001152 Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge. Ground Floor 19 First Floor 20 Second Floor 21 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 22 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 23 First Floor 24 Second Floor 25 50001311 Fly Ash brick masonary in cement mortar 1:4:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 26 First Floor 27 50005074 Supplying, installing RO +UV+UF+TDS control+UV in-tank and zero water wastage technology with active cupper technology, wall mounted water purifier aquaguard capacity up to 20L/hr(Make KENT-grand star/Eureka Forbes)[N.S.W.I] Ground Floor 28 50010026 Supplying, Fitting and fixing of glass reinforced concrete(GRC) screens 30mm to 32mm thick (Dry density>1800 kg/cum) on wall (Wall cladding) and module of 1.5 sqm of approved quality/ pattern shall be synthetic rubber/ FRP moulded in size, pattern, design, colour and thickness. The screens made of 53 grade white cement make Birla/JK cement, quartz, fine silica sand, alkali resistance glass fiber, super plastisizer, polymers and UV resistant synthetic inorganic pigments etc. The screen shall be fixed by dry fixing method with appropriate SS pipe 304 grade ‘L’ shaped clamps & cleat, using fasteners and necessary hardware, etc. Including MS scaffolding in building façade. The rate shall be included the structural steel frames (Horizontal & vertical members) support to hold the GRC jalli at required building height to withstand wind pressure as per IS 875(prt-3):2015. The cost includes labour, materials, transportations, T&P, etc. all complete as per direction of Engineer-in-Charge. The screen must have compressive strength>400kg/cm2 ,wet transverse strength > 7 N/mm, thermal conductivity1.63 W/m-K at 3% moisture content, water absorption<(><<)> 5% of dry weight. [NEW-NSWI] Ground Floor 29 First Floor 30 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 31 First Floor 32 Second Floor 33 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 34 First Floor 35 Second Floor 36 50010384 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC SILL BAND) Ground Floor 37 First Floor 38 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 39 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 40 First Floor 41 Second Floor 42 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 43 First Floor 44 Second Floor 45 50010432 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC STAIRCASE) Ground Floor 46 First Floor 47 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 48 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 49 First Floor 50 Second Floor 51 50010458 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement. (FOR RCC FINS) Ground Floor 52 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 53 First Floor 54 Second Floor 55 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 56 First Floor 57 Second Floor 58 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 59 First Floor 60 Second Floor 61 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 62 First Floor 63 Second Floor 64 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 65 First Floor 66 Second Floor 67 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 68 First Floor 69 Second Floor 70 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 71 First Floor 72 Second Floor 73 50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor 74 First Floor 75 50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor 76 First Floor 77 50010704 Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej). Ground Floor 78 First Floor 79 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 80 First Floor 81 Second Floor 82 50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Second Floor 83 50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor 84 First Floor 85 50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor 86 First Floor 87 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 88 First Floor 89 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 90 First Floor 91 50011406 Providing and fixing of factory-made 3Track 3Panel UPVC Sliding window (White Colour) frame size 128X50mm and Sash size 45X70mm complete up to and including 1.5m high, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 5mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 5 mm clear Toughened glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep glass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 92 First Floor 93 50011416 Providing and fixing of factory-made 2Track 2Panel UPVC Sliding window/Door (White Colour) frame size 70X50mm and Sash size 45X74mm complete above 1.5m high, comprising UPVC multi-chambered frame having in-built UPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber.The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm.UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 6mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 6 mm clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock &Multi Lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep gl ass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 94 First Floor 95 50011456 Supplying, Fitting & Fixing of full body Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 1200mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 96 First Floor 97 50011486 Supplying, Fitting & Fixing of Anti-Skid Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 600mm x 9 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY TECHSTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 98 First Floor 99 50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 100 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Second Floor 101 50011948 Supply and installation of ZMS (Nylon)/Vibrance Serene series cubicles of width and depth as per specifications/ site drawings and height of 2000mm. The cubicle is made from solid grade 12mm thick compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of Alpha cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge. All doors of size 600x1800mm will be of single colour and made of 12 mm thick HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 nos Nylon PA-6 made hinges affixed to the pilasters. Nylon PA-6 made coat hook and lock set are provided with each door. All pilasters will be made of 12 mm thick HPL compact panel with chamfered edge and completed with stainless steel made thumb turn lock set. Aluminum made door stopper profiles with rubber linings for dampening the noise while door closing will be provided at the vertical ends of the pilasters. Pilasters will be anchored to the floor using Nylon PA-6 made adjustable legs. The bottom gap is 150 mm. All intermediate partitions or dividers of 1800mm hight will be made of 12 mm thick HPL compact laminate panels. They are affixed with aluminium made U-channel at their ends for ultimate stability of the system. The Semi-spherical (Top) head frame structure for surface protection of size to be 50x32x1.6T, Corner joinery section size to be 40x16.5x1.8T,U-Channel Wall joinery section size to be 22x16x1.6T,Door stopper section size to be 21x12.5x1.6T. Nylon Polyamide grade-6 Adjustable Pedestal Footing of base minimum diameter 70 mm, giving a clearance height of 150mm. Self closing Hinges (Gravity mechanism) made from Nylon Polyamide grade-6. Round Coat hook with base diameter 53 mm made from Nylon polyamide grade-6. Round Door knob diameter 48 mm with thumb-recess made from Nylon polyamide grade-6. Rotating Thumb-turn locking system with privacy indicator locking system made from Nylon polyamide grade-6, Anti-noise rubber padding, Stainless steel grade 304 screws, Anti-rotation Nylon polyamide grade-6 expandable wall plugs. The cost includes supply, installation, transportation, handling charges completely. Make complete set:MERINO/GREENLAM Ground Floor 102 First Floor 103 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 104 First Floor 105 50012200 System Aluminum Casement System Doors – Double Leaf Swing single glazed door Providing and fixing System Aluminum works for casement systems door having door frame 55mmx40mm, shutter 70mmx40mm, door bottom transom 150mmx40mm, central profile 47.3x42.9mm, grazing bead 31.8mmx17.85mm with glazing of single glass panel without middle transom made of non-euro groove architectural aluminium profile. The extruded aluminums sections should be T6 tempered made from Grade 6063 alloy, approved shade of pure-polyster/ hybrid surface coating Anodized (50-60-micron powder coat), silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. The drainage slots provided at the bottom part of the frame/sash on the outerside & weather strip siliconased brush gasket will be provided. 6mm Clear Toughend Glass (Saint-Gobain / AIS) infill fitted unto Sash/Frame using micro-wave treated siliconised EPDM gasket. The casement systems having hardwares SS handle (22mmx300mm), mortise lock with both side key cylinder, floor spring. Wall Thickness - Aluminium: 1.5mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. This cost includes labour, materials, wastage, transportation at site, fixing, fittings, etc. all complete. (Make :- FENESTA/ REKLAD) Ground Floor 106 50012828 Supply and fixing of MCM Modified Clay Material ‐ MCM A 300X600 mm of PHOMI make,as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 and European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in‐charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in‐charge. Make-Phomi Ground Floor 107 First Floor 108 50013261 Providing, Fixing & Fitting Ceramic glazed tiles (SUPER PREMIUM QUALITY) on wall of size 300mmx600mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect. (JOHNSON/SOMANY/KAJARIA) [NSWI] Ground Floor 109 First Floor 110 EPH 111 10000556 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200cfm/300psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories,tools and plant and consumables etc for lowering of 200mm dia PVC pipes for housing fitted with socket and with or without well screen as per tenecessity for soft,medium,hard and boulder formation (PVC casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and with drawing after completion of the tube well).(Icluding both LABOUR FOR DRILLING 200MM DIA UPTO 30 MTR. & LABOUR FOR DRILLING 150MM DIA FROM 30 MTR TO 150 MTR including all.) CONSIDER FOR 150 MTR DEPTH. Ground Floor 112 10000564 Lowering 200mm dia. PVC pipes with or without slotted pipes as per the necessity from ground level with fitting and fixing the same in a perfectly vertical position. This includes cutting, threading pipes/slotted pipes with providing and fixing of required jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells so as to prevent entry of foreign materials from above. (FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG). Ground Floor 113 10000570 Cleaning and developing 200mm dia. tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour .(FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG). Ground Floor 114 10000583 Supplying and fixing of control panel board with all accessories. (UPTO 3HP SINGLE PHASE) Make: KSB Ground Floor 115 10000588 Supplying and fixing of HDPE Pipes 32/40 mm (High Density Polyethylene pipes having inner dia. 32mm and outer dia. 40mm) 6Kg/Sq. cm With IS specification.(32MM NOMINAL BORE SIZE). Make Finolex/Oriplast/Supreme. Ground Floor 116 10000594 Supplying and fixing of PVC coated steel rope including cost of material, labour etc. complete. Make-Mahdev/Aerolex Ground Floor 117 10000596 Supplying and fixing of Finolex/L&T/Cable 4 Sq. mm (3core copper wire flat cable with PVC insulation). Ground Floor 118 10000600 Supplying and fixing of accessories like Nipple, Bore cover, MS clamp, Nut Bolt, Stainless steel nipple, Short piece, GI bend, Socket etc. complete. Ground Floor 119 10000602 Installation charges pump set with all accessories including transportation etc. Ground Floor 120 10001184 Supplying of 200mm inner dia. PVC casing pipe for deep bore well CD (deep well casing) type basing on IS-12818-2010, wall thick ness 13mm to 14.8mm with One end of the pipe is male-threaded whereas the other end is a female-threaded socket. Threads are either V-type or trapezoid-type, and protection caps are provided on the threads to protect the threads in transit. With pressure ratings ranging from 7.5 to 20 bar (PN). Make: ORIPLAST/SUPREME/FINOLEX Ground Floor 121 10001190 Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.1.5HP, Single phase,32D,19 Stage (head 50-129m). Make: KSB(2C/21). Ground Floor 122 10001204 Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.7.5HP, Three phase, 100x75, Open well (head 14-29m) make: KSB ( MR7.5A/50X40X45) Ground Floor 123 FUR 124 50010482 Supply and fixing of GODREJ MAKE EXECUTIVE CHAIR WITH HEADMODEL NO- Aero (Large Seat) Black Ink Color FK01(56101522SD04692) +(561015 22SD04353).[NSWI] Ground Floor 125 50010484 Supply and fixing of GODREJ MAKE EXECUTIVE CHAIR WITH HEADMODEL NO- OXBO MID BACK CHAIR 7502RGC01 Black Ink Black56101522SD03157.[NSWI] Ground Floor 126 50011783 Supplying and installation of work station table of size 1050x600x750mm(H) having 25mm thick pre-laminated particle board top with 2mm thick PVC edge leaping on all exposed edges. The legs of the tables have 60x40mm and beams are 40x20mm MS powder coated. The vertical raceway with built in separator for power and data of size 250mmx70mm thick with provision to mount switches and sockets on laminate facia with vertical wire entry cover for wire uptakes from floor to raceway of 65mm dia wire manager grommet in complete set are provided. Make: Featherlite (HSN code-94031090) Ground Floor 127 50013340 Supplying and instllation of dining chair having Seat and Back made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Make: GODREJ ,Model-UNWIND, HSN CODE-94016900 Ground Floor 128 50013568 Supplying and installation of Table without CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 and MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Make: Godrej ENTERPRISE, HSN CODE-94031010 Ground Floor 129 50014300 Storage Unit:Slimline 2 Door with full locker 1900H X 900W X 507D Supplying and placing in position Home storage Unit.900mm(W)x507mm(D)x1950mm(H) (Height without leveler). Construction & Material-Aesthetically appealing Slimline, completely knock down construction. Removable Skirting to cover integral legs. Legs fitted wit h screw type leveler Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Main Door Steel Hinged Door. Main Door Locking / handle: Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. 3 way 90 Degree Removable key type Cam lock & locking mechanism. Locker Door & it’s locking / handle for Model ‘H’ .Fixed Half locker on RH side Hinged Door 2 way Cam lock with Knob type handle Shelving: • Finish: Epoxy Powder coated to the thickness of 50 microns (+-10).HSN CODE-94032090 Ground Floor 130 50014302 Chair:Traverse 3 Seater 2 arms Providing, supplying and placing of waiting chair.SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness with circular perforations.The Side Bar is made of cold rolled M.S.sheet 0.12 ± 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts. SEAT SIZE : 50.0 cm (W) x 45.5 cm (D) BACK SIZE : 50.0 cm (W) x 56.0 cm (H)CROSS BEAM: It is made up of cold rolled steel with 0.2 ± 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end caps LEG: It is made up of cold rolled steel with 0.12 ± 0.013 cm thickness. It is powder coated. The legs are fitted with leveller cups covered with SS304 sheet. ARMREST: It is made of SS304 round tube of Ø 3.175 ± 0.03cm x 0.12 ± 0.013 cm thick formed to make an oblong shape.WIDTH (W): 173.5 CM.DEPTH (D): 74.0 CM.HEIGHT (H): 91.0 CM SEAT HEIGHT (SH): 44.0 CM.HSN CODE-94031010 Ground Floor 131 50014304 Storage Unit:Pigeon Hole Base Supplying and placing in position Storage unitOverall Dimensions of Pigeon Hole Base 1800 H Main Modish Oak shall be 582mm(W)x400mm(D)x1200mm(H) . TheConstruction shall be Rigid Knock Down Construction . Material used shall be all side panels , top/bottom panels and shelf panels shall be made from 18 mm thick Pre- Laminated Board (interior grade) with 2 mm thick PVC edge beading . Back panel shall be made from 9 mm thick Pre- Laminated board . Stackability shall have Add on units stacked width wise to form a bank of racks having common side panel (max . 6 Add ons) . The shelfs shall be 6 Main Module has 12 shelves placing in 270 mm distance , 4 Main module has 8 shelves placing in 270 mm distance . The Configuration shall have 6 Main Module , 4 Main Module also 6 Add on module , 4 Add on module .HSN CODE-94031010 Ground Floor 132 50014306 Chair:Unwind with Desklet Providing, supplying and placing of chair with desklet.The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. The Armrest should be made of indoor grade PolyPropylene compound and assembled over the tubular frame. The L shaped desklet should be made of 1.8+-0.05cm thick prelaminated particle board with 0.2+-0.05cm thick injection moulded poly proplylene all around. Desklet should have back and front adjustment of 4.4+-0.5cm. The paper tray should be made of 0.4mm thick MS rod which is spot welded to form a mesh like structure. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-57.5 cm and Depth-67.8 cm.HSN CODE-94016900 Ground Floor 133 50014308 VFC Filling Cabinet 1320H x 470W x 620D Supplying and placing in position Filling Cabinet Vertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50.HSN CODE-94031010 Ground Floor 134 50014310 Bed:APO Bunk Bed+Mattress with Pillow Providing, supplying and placing of Bunk Bed BED FRAME BED FRAME ASSEMBLIES 2 NOS. ARE WELDED OF SIDE FRAME & INNER SLAT. THE SIDE FRA ASSEMBLY ARE MADE OF RECT. TUBE 50.8 x 25.4 X 1.2MM. ASSEMBLY INNER SLAT IS SQ. TUBE OF 25.4 X 1.2 MM THK MS ERW TUBE IS:7138 GRADE.HEAD BOARD & TAIL BOARD MOSOITO ROD:-HEAD BOARD & TAIL BOARD ARE MADE UP OF SO. PIPE 38.1 X 1.6MM THK, SQ 25.4 X 1.2MM THK MS ERW TUBE IS: 7138 GRADE SUPPORT BRACKET 3.2MM THK MS SHEET IS: 513 AND CONNECT WITH BED FRAME WITH MA NUT &BOLT,MOSQUITO ROD OF $19.0 X 1.0 MM THK MS ERW TUBE TO BE FIT IN #22 X 1.0MM THK MS ERW TUBE & BOTH TUBE IS OF IS: 7138 GRADE, HOOK IS PROVIDED AT THE TOP OF ALL ROD. LADDER ASLY - LADDER ASSY IS MADE UP OF RECT 50.8 X 25.4 X 1.2MM THK & SO. 25.4 X 1.2MM THK MS ERW TUBE IS: 7138 & CONNECTED WITH BED FRAME SIDE SUPPORT :- SIDE SUPPORT IS MADE OF #25.4 X 1.2MM THK & #19 X 1.2MM THK TUBE CONNECTED WITH BED FRAME USING MB NUT & BOLT. CLADDING -12mm THK PLY.HSN CODE-94032090 Ground Floor 135 50014312 Providing, supplying and placing of Personal Locker Product Size - 375(W) x 470(D) x 1950*(H) *Height including leveler* Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main +1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA D Grade as per IS- 513 - CRCA D Grade as per IS-513Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge.Door size - For 4 Door locker - 373(W) X 18(T) X 473(H)Cam Lock - Oval knob that functions as a handle- Click action mechanism- Key removal in locked and unlocked position- Zinc alloy die cast housing Shelving - 3 Shelves for 4 Door locker without envelope slot.HSN-94031010 Ground Floor 136 50014314 Cafepod Table Supplying and placing in position cafeteria table of the following specifications with size shall be 800 Width mm x 800 Depth mm x 742.5 Height mm . The top shall be stainless steel top of size : 800 mm x 800 mm x 1.2 mm thick . Top Assembly shall be 24 mm thick also top shall be made from 1.2 mm thick SS - 304 Brushed steel finish sheet . The Welded Stiffener assembly made from 0.6 mm thick SS - 304 sheet glued with top with special glue .Understructure shall be foldable and stackable , made with combination of aluminium and plastic . Centre column is of Aluminium extrusion of diameter 70 mm , which is anodized . Base is made in 2 pieces of die cast aluminium with buffed finish . It is bolted together with centre column and top flange .HSN CODE-94031010 Ground Floor 137 IPH 138 10000314 Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.Porcelin 23 inch LWC(ORISSA Pan) Ground Floor 139 10001056 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes. Ground Floor 140 10001058 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes. Ground Floor 141 10001060 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes. Ground Floor 142 10001062 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 50 mm outer dia CPVC pipes. Ground Floor 143 10001064 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 144 10001066 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 145 10001068 Providing and fixing on wall face PVC 110 mm dia. offset SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. offset PVC SWR type. Ground Floor 146 10001070 Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type. Ground Floor 147 10001072 Providing and fixing on wall face 110mm dia. plain bend PVC SWR type moulded fittings / accessories for Rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Plain Bend PVC SWR type. Ground Floor 148 10001074 Providing and fixing on wall face 110mm dia. bend with door PVC SWR type moulded fittings / accessories for rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Bend with door PVC SWR type. Ground Floor 149 10001076 Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type. Ground Floor 150 10001088 Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall. Ground Floor 151 10001094 Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm. Ground Floor 152 10001096 Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete, with cement concrete (1:3:6) and 12mm cement plaster (1:3) along with Cement punning. Ground Floor 153 10001098 Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX 110mm Dia Inlet & Outlet floor trap PVC SWR type. Ground Floor 154 10001100 Providing and fixing EWC Commode floor mount(S/P trap) conforming to IS 2556: Part 3- 2004 duly fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification without cistern - Long pattern size 575x345x390mm. Make: Hindware POPULAR (CAT NO-20044 S-TRAP-28.5/P-TRAP-18.0)/Parryware ELITE (P-TRAP-CO278/S-TRAP-CO297) White Vitreous China Wash Down Water Closet (EWC). Ground Floor 155 10001102 Fixing of Back to wall WC with UF soft close seat cover, hinges, accessories set with rack bolt 12mm dia stainless steel Size(360x51 5x410mm) (FOR DISABLED) Floor Mounted to the floor fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification WITHOUT CISTERN. make: JAQUAR (DIS-WHT-9 3955P180UF)/ KOHLER(K-2983IN-S-O) DISABLED PERSON COMMODE Ground Floor 156 10001116 Providing and Fixing PVC LOW LEVEL CYSTERN conforming to IS 2556 : Part 3- 2004 SIZE 415X130X305mm.Make: Hindware SUPERB (CAT NO-50 8829)/Parryware SLIMLINE ECONOMY (E-8090).White Vitreous china 10 litre (full flush) capacity manually controlled low level flushing cistern with all fittings and fixtures. Ground Floor 157 10001118 Providing and fixing stainless steel kitchen sink with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Size 600X450X225mm Steel Sink Matt single bowl. Make: (Parry ware(C857272)/Hindware(KS FLAMINGO)). Stainless steel kitchen sink - 600X450X225mm Single bowl. Ground Floor 158 10001122 Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm. Ground Floor 159 10001124 Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 160 10001126 Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 161 10001132 Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock. Ground Floor 162 10001134 Providing and fixing of 15mm CP dia. Screw-down long body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR( CON-107KN)/ KOHLER (K-27490IN-CP) 15mm dia. Long body bib cock. Ground Floor 163 10001136 Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock. Ground Floor 164 10001138 Providing and fixing of Screw-down 15 mm CP concealed Stop Cock with fitting sleeve, operating lever and adjustable wall flange and concealed body conforming to of the following nominal sizes as per specification complete. (Deluxe Headand high quality). Make: JAQUAR-(CON-083FTK+ALD-083FT). 15mm diameter Concealed Stop Cock. Ground Floor 165 10001140 Providing and fixing of 15mm dia. CP overhead shower rose 100mm round with rubit cleaning system including polishing all complete as per specification.(Deluxe Head and Heavy quality). Make: JAQUAR (OHS-1989)/ KOHLER (K-163561N-A-CP). 100 mm diameter / 15 – 20 mm width shower rose. Ground Floor 166 10001142 Providing and fixing of 15mm dia. CP shower arm 160mm long light body round shape for wall mounted with flange. including polishing all complete as per specification. (Deluxe Head and Heavy quality). Make: JAQUAR (SHA -477)/ KOHLER (K-99054IN-CP). 15 mm x 160 mm long size CP shower arm. Ground Floor 167 10001146 Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet. Ground Floor 168 10001148 Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder. Ground Floor 169 10001150 Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self. Ground Floor 170 10001152 Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail. Ground Floor 171 10001154 Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange. Ground Floor 172 10001158 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification.(AR-2013,SL. NO.-3.4.26). Make: Mirror Glass (SAINT GOBIN/AIS(ASAHI)). 600mm x450mm Bevelled Edge Mirror (Heavy quality). Ground Floor 173 10001160 Providing and fixing Rotational moulded polyethylene cylindrical vertical water storage tank 3layer wall conforming to IS : 12701--1996 including cutting holes through the tank and fixing, fittings CPVC tubes and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting up to a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification. Make: SINTEX/SUPREME/ORIPLAST. Triple Layer Cylindrical Vertical water storage tanks. Ground Floor 174 10001166 Fixing wash basins WITHOUT PEDESTALwith hole for pillar taps with 10mm dia M S rack bolt (JAQUAR MAKE) painted white including cutting holes in walls and making good the damages etc all complete, with fixing of 15mm dia pillar cock, as per specification.(Vitreous china flat back wash basin 550x400x200 mm)(CODE CNS-WHT-801 JAQUAR MAKE).Pillar cock(CON-021 JAQUAR)32mm full/half thread CP waste(ALD-705/709-JAQUAR), Rack bolt(ZPS-MST-RB03)Vitreous china flat back wash basin 550x400x200mm . Ground Floor 175 10001170 Providing and fixing of Metropole flush valve dual flow,32mm concealed body with exposed shutoff provision and 100mm square plate, 3.0/6.0 litre per flushing. Make: JAQUAR (FLV-1085 NSQ),fixing accessories with accessories set. Concealed Flushing Cistern. Ground Floor 176 10001172 Providing and fixing of 692mm long stainless steel grab bar handle (FOR DISABLED)fixed to head less socket caps, wall plugs and chromium plated screws as per specification . Make: JAQUAR (WAC-WHT-BR0600N) 692mm long stainless steel grab bar handle. Ground Floor 177 10001174 Providing and fixing of stainless steel vertical swing grab bar (FOR DISABLED) fixed to head less socket caps, wall plugs and chromium plated screws as per specification. Make: JAQUAR (WAC-WHT-BG0800N) Stainless steel vertical swing grab bar. Ground Floor 178 10001209 Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish. Ground Floor 179 MIS-CVL-Area Concr 180 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 181 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 182 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 183 50001782 Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement propertion(3:1), including cleaning before pouring 12mm to 25mm and 15 cm depth. Ground Floor 184 50011616 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) Ground Floor 185 50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor 186 MIS-CVL-Area Pavin 187 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 188 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 189 50001701 Providing and laying 80 mm thick Factory made cement concrete interlocking Paver block of M40 grade made by block making machine with strong vibratory compaction and approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of coares sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-In-Charge. Ground Floor 190 50011883 Construction of Granular Sub-Base (Gr-IV) by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision). Vide AR-2006, Page-160,Item-39 . Ground Floor 191 50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor 192 MIS-CVL-Boundary w 193 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 194 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 195 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 196 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 197 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 198 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 199 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 200 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 201 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 202 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 203 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 204 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 205 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 206 MIS-CVL-Bus Washin 207 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 208 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 209 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 210 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 211 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 212 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 213 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 214 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 215 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 216 MIS-CVL-CC Road 217 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 218 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 219 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 220 50001782 Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement propertion(3:1), including cleaning before pouring 12mm to 25mm and 15 cm depth. Ground Floor 221 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 222 50011101 Providing and laying in position 200mm thick Tremix/VDF flooring P.C.C. M-30 grade concrete using 20mmnominal size HBG down graded chips for plain cement concrete work using cement content 400kg/cum as per approved design mix having continious agitated mixer,mis design of specified grade for reinforced cement concrete work and for VDF floorng using screed board vibrator,placing of filtermat(nylon cloth to act as very fine filter),top mat (large single PVC sheet),Vaccume process using vaccume pump about 0.08MPA which ruduces water content about 15-20% ,power trawelling,brooming,T&P Charges including power,loading,unloading and hire charges,making grooves of 6mm wide and 25mm deep @ 1.5m C/C both ways ,filling the joints with sealing compound of approved quantityGrade-A(Ref:DSR-SH 16.46.1) with cost of material ,labour,conveyance,royalty etc. complete basing on IS 256:2000 minimum slump is 25mm to 75mm and minimum thiockness is 125mm . Ground Floor 223 50011103 Painting runway/taxi/track/apron marking with adequate nos of coats (minimum 2coats) to give uniform finish with road marking paint Based on solvent based acrylic resin has UV resistant colours of superior make (water based) i/c cleaning the surface of all dirt scales, oil, grease and other foreign material etc. and lining out complete. For new road work. Ref: DSR-16.47.1.Make(Asian paints:APCOTRAK, Berger:ROAD MARKING PAINT, Dulux :PROFESSIONAL WEATHER SHIELD ANTI-CARB)[NEW-NSWI] Ground Floor 224 50011883 Construction of Granular Sub-Base (Gr-IV) by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision). Vide AR-2006, Page-160,Item-39 . Ground Floor 225 50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor 226 MIS-CVL-Cow Catche 227 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 228 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 229 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 230 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 231 50005727 Prividing,Fittin & fixing of cow catcher,made out of steel work (TATA make GI pipe circular hollow of 100 mm OD as per IS 1239[P-1] 4 mm thick) including RS joist of size ISLB 150X80 with cutting requird size ,welding using MS flat of 40X6mm size,fixing in position with approvd design and specification including all fitings and applying a priming coat of approvd steel primer etc all complete as per the direction & instruction of the Engineer-in-charge of the work.DATA FOR size 16X5= 80 sft Ground Floor 232 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 233 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 234 50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor 235 MIS-CVL-DG Shed 236 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 237 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 238 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 239 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 240 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 241 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 242 50000884 Enamel painting two coats including cost of all materials cleaning,brushes,putty etc. Ground Floor 243 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 244 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 245 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 246 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 247 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 248 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 249 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 250 50011936 Supplying and fixing of TATA Blue scope Steel Sheet Roofing of 0.52 mm thick as per attached Quoatation in roof drilling holes in wind ties including fixing of ridges valleys wind ties and cost of fittings.[NEW-NSWI] Ground Floor 251 MIS-CVL-Drivers R 252 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 253 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 254 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 255 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 256 First Floor 257 Second Floor 258 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 259 First Floor 260 Second Floor 261 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 262 First Floor 263 Second Floor 264 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 265 50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor 266 First Floor 267 50000568 Kotah stone flooring in floors,treads rise and landing on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete. Ground Floor 268 50001152 Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge. Ground Floor 269 First Floor 270 Second Floor 271 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 272 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 273 First Floor 274 Second Floor 275 50001311 Fly Ash brick masonary in cement mortar 1:4:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 276 First Floor 277 50005074 Supplying, installing RO +UV+UF+TDS control+UV in-tank and zero water wastage technology with active cupper technology, wall mounted water purifier aquaguard capacity up to 20L/hr(Make KENT-grand star/Eureka Forbes)[N.S.W.I] Ground Floor 278 50010026 Supplying, Fitting and fixing of glass reinforced concrete(GRC) screens 30mm to 32mm thick (Dry density>1800 kg/cum) on wall (Wall cladding) and module of 1.5 sqm of approved quality/ pattern shall be synthetic rubber/ FRP moulded in size, pattern, design, colour and thickness. The screens made of 53 grade white cement make Birla/JK cement, quartz, fine silica sand, alkali resistance glass fiber, super plastisizer, polymers and UV resistant synthetic inorganic pigments etc. The screen shall be fixed by dry fixing method with appropriate SS pipe 304 grade ‘L’ shaped clamps & cleat, using fasteners and necessary hardware, etc. Including MS scaffolding in building façade. The rate shall be included the structural steel frames (Horizontal & vertical members) support to hold the GRC jalli at required building height to withstand wind pressure as per IS 875(prt-3):2015. The cost includes labour, materials, transportations, T&P, etc. all complete as per direction of Engineer-in-Charge. The screen must have compressive strength>400kg/cm2 ,wet transverse strength > 7 N/mm, thermal conductivity1.63 W/m-K at 3% moisture content, water absorption<(><<)> 5% of dry weight. [NEW-NSWI] Ground Floor 279 First Floor 280 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 281 First Floor 282 Second Floor 283 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 284 First Floor 285 Second Floor 286 50010384 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC SILL BAND) Ground Floor 287 First Floor 288 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 289 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 290 First Floor 291 Second Floor 292 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 293 First Floor 294 Second Floor 295 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 296 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 297 First Floor 298 Second Floor 299 50010458 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement. (FOR RCC FINS) Ground Floor 300 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 301 First Floor 302 Second Floor 303 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 304 First Floor 305 Second Floor 306 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 307 First Floor 308 Second Floor 309 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 310 First Floor 311 Second Floor 312 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 313 First Floor 314 Second Floor 315 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 316 First Floor 317 Second Floor 318 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 319 First Floor 320 Second Floor 321 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 322 First Floor 323 Second Floor 324 50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor 325 First Floor 326 50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor 327 First Floor 328 50010704 Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej). Ground Floor 329 First Floor 330 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 331 First Floor 332 Second Floor 333 50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor 334 First Floor 335 50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor 336 First Floor 337 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 338 First Floor 339 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 340 First Floor 341 50011397 Providing and fixing of factory-made 2Track 2Panel uPVC Sliding window (White Colour) frame size 70X50mm and Sash size 45X60mm complete up to and including 1.5m high, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 5mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 5 mm clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep glass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 342 First Floor 343 50011406 Providing and fixing of factory-made 3Track 3Panel UPVC Sliding window (White Colour) frame size 128X50mm and Sash size 45X70mm complete up to and including 1.5m high, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 5mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 5 mm clear Toughened glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep glass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 344 First Floor 345 Second Floor 346 50011486 Supplying, Fitting & Fixing of Anti-Skid Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 600mm x 9 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY TECHSTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 347 First Floor 348 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Second Floor 349 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 350 First Floor 351 50012200 System Aluminum Casement System Doors – Double Leaf Swing single glazed door Providing and fixing System Aluminum works for casement systems door having door frame 55mmx40mm, shutter 70mmx40mm, door bottom transom 150mmx40mm, central profile 47.3x42.9mm, grazing bead 31.8mmx17.85mm with glazing of single glass panel without middle transom made of non-euro groove architectural aluminium profile. The extruded aluminums sections should be T6 tempered made from Grade 6063 alloy, approved shade of pure-polyster/ hybrid surface coating Anodized (50-60-micron powder coat), silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. The drainage slots provided at the bottom part of the frame/sash on the outerside & weather strip siliconased brush gasket will be provided. 6mm Clear Toughend Glass (Saint-Gobain / AIS) infill fitted unto Sash/Frame using micro-wave treated siliconised EPDM gasket. The casement systems having hardwares SS handle (22mmx300mm), mortise lock with both side key cylinder, floor spring. Wall Thickness - Aluminium: 1.5mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. This cost includes labour, materials, wastage, transportation at site, fixing, fittings, etc. all complete. (Make :- FENESTA/ REKLAD) Ground Floor 352 50012828 Supply and fixing of MCM Modified Clay Material ‐ MCM A 300X600 mm of PHOMI make,as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 and European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in‐charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in‐charge. Make-Phomi Ground Floor 353 First Floor 354 50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Ground Floor 355 First Floor 356 50013261 Providing, Fixing & Fitting Ceramic glazed tiles (SUPER PREMIUM QUALITY) on wall of size 300mmx600mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect. (JOHNSON/SOMANY/KAJARIA) [NSWI] Ground Floor 357 First Floor 358 MIS-CVL-EV Chargin 359 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 360 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 361 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 362 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 363 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 364 50005597 Providing TEXTURED POLYCARBONATE sheet with all its accessories etc complete as per the direction & instruction of the E.I.C. [N.S.W.I] Ground Floor 365 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 366 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 367 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 368 50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 369 MIS-CVL-Entry & Ex 370 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 371 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 372 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 373 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 374 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 375 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 376 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 377 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 378 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 379 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 380 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 381 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 382 MIS-CVL-Inspection 383 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 384 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 385 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 386 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 387 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 388 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 389 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 390 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 391 MIS-CVL-Land Scapi 392 50002295 Planting of Nerium Olender 3 ht. ornamental plants, well established healthy disease free in poly bag/ big container Including transportation and delivery at sites. Ground Floor 393 50005655 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts Unit = Sqm (CPWD 2.12,P-217)[N.S.W.I] Ground Floor 394 50005657 Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment) (CPWD 2.2,P-213)[N.S.W.I] Ground Floor 395 50005659 Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm (CPWD 2.4.3,P-214)[N.S.W.I] Ground Floor 396 50005661 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).(CPWD 2.8,P-216)[N.S.W.I] Ground Floor 397 50005663 Providing & laying Selection no. 1 grass turf(Bermuda) with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer in charge (CPWD 2.34,P-235)[N.S.W.I] Ground Floor 398 50005667 Planting of Murraya exotica 20 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites. This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 8.46,p-372= Rs.15.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 154.49.[N.S.W.I] Ground Floor 399 50005669 Planting of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) 45cm ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant9.40,p-381= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25 ,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49 Ground Floor 400 50005671 Planting of Malpighia coccigera 21/2 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 8.45,p-372= Rs.50.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 189.49[N.S.W.I] Ground Floor 401 50005673 Planting of Tecoma grandiflora 21/2 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.13,p-383= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49 Ground Floor 402 50005675 Planting of Allamanda cathartica 30 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.10,p-381= Rs.45.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x0.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 184.49[N.S.W.I] Ground Floor 403 50005677 Planting of Jasmine humile (Yellow) o 30 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites. This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.90,p-382= Rs.30.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x0.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 169.49.[N.S.W.I] Ground Floor 404 50005681 Planting of Hena 20 ht. well grown healthy plant species as per specified height all saplings are healthy grown well canopy,disease free etc. including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . Plant 8.50,p-373= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49(Say Rs.180.00)[N.S.W.I] Ground Floor 405 50005683 Planting of Fox tail palm 70 ht.ornamental decorative specimen plants well established healthy disease free in poly bag / big container including transportation and delivery at sites.Planting of each plant at specified location by application of fortilizer and pesticide as required as per instructio of Officer in-charge.This cost is including hoeing soil of size 3dia and 3 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . a) plant 5.3,p-324=Rs.1183.00, stacking 7.44,p-349= Rs.650.00, digging hole 2.14.1,p-218= Rs 214.77, antitermite 2.54,p-246=Rs.92.68, shaping 2.38 ,p-236=Rs.53.60, cattle manure 2.25,p-224=Rs.374.12, fencing 2.23Sqm 2.58,p-248= Rs. 193.58x2.23= Rs 431.68 Total cost=2999.85(say Rs.3000.00) [N.S.W.I] Ground Floor 406 50006323 Filling & Leveling of site by JCB.[N.S.W.I] Ground Floor 407 50006324 Supplying planting of fruit plants including digging the pit & required quantity of fertilizer & pesticides such as mango water apple, jack fruit,guava, custand apple,count., lichu, jamun,star fruit ,tamarind,citrus lime,sapeta etc. Two to three year olds slpping at least two to six ft height depend on species as per direction of E.I.C.[N.S.W.I] Ground Floor 408 50006326 Maintenance Per Month including fertilizer pesticide, man power,grass cutting, straining, Seasonal flower all etc.[N.S.W.I] Ground Floor 409 MIS-CVL-Market Com 410 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 411 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 412 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 413 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 414 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 415 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 416 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 417 50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor 418 50000937 Supply, Fitting and Fixing of Rolling Shutter including cost of Material & Labour Ground Floor 419 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 420 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 421 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 422 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 423 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 424 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 425 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 426 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 427 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 428 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 429 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 430 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 431 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 432 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 433 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 434 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 435 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 436 50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Ground Floor 437 50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor 438 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 439 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 440 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Ground Floor 441 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Third Floor 442 50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Third Floor 443 MIS-CVL-Pump room 444 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 445 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 446 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 447 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 448 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 449 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 450 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 451 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 452 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 453 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 454 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 455 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 456 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 457 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 458 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 459 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 460 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 461 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 462 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 463 50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor 464 50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor 465 MIS-CVL-RCC Drain 466 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 467 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 468 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 469 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 470 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 471 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 472 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 473 MIS-CVL-Security S 474 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 475 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 476 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 477 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 478 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 479 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 480 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 481 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 482 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 483 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 484 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 485 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 486 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 487 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 488 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 489 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 490 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 491 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 492 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 493 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 494 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 495 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 496 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 497 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 498 50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor 499 50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor 500 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 501 50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Ground Floor 502 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 503 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 504 50011426 Providing and fixing of factory-made 3Track 3Panel UPVC Sliding window/Door (White Colour) frame size 128X50mm and Sash size 45X74mm completeabove 1.5m high, comprising UPVC multi-chambered frame having in-built UPVC roller track on top and UPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber.The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 6mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 6 mm clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock & Multi Lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep gl ass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 505 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Ground Floor 506 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 507 50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Ground Floor 508 MIS-CVL-Septic tan 509 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 510 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 511 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 512 50000018 4 thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. Ground Floor 513 50000019 25mm. thick A.S. Flooring with cement concrete 1:2:4 including punning using 12mm. size hard granite chips including cost of all materials T & P etc complete. Ground Floor 514 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 515 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 516 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 517 50001839 Fly Ash brick masonary work in cement mortar 1:4 (1 cement : 4 sand) using fly ash bricks of 23cm X 11cm X 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/-2% including watering,curing and cost,conveyance,royality of all m aterials and cost of labour etc complete.As per the direction of the E.I.C. Ground Floor 518 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 519 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 520 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 521 MIS-CVL-Site Devel 522 50001792 Supplying, filling or Spreading of moorum by mechanical means including cost of all labour,material T & P etc. complete as per the direction of Engineer-in-charge. Ground Floor 523 MIS-CVL-Water Puri 524 50008261 Supplying and fixing Aquaguard Storage Cooler–Cum-Purifier (80 Ltr. Capacity ) with all cost complete.[N.S.W.I] Ground Floor 525 MIS-CVL-Workshop 526 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 527 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 528 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 529 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 530 First Floor 531 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 532 First Floor 533 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 534 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 535 First Floor 536 50001692 Supplying, fitting,fixing and hoisting joists & M.S trusses and placing in position including cost of labour materials transportation etc.(make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)) Ground Floor 537 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 538 First Floor 539 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 540 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 541 First Floor 542 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 543 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 544 First Floor 545 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 546 First Floor 547 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 548 First Floor 549 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 550 First Floor 551 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 552 First Floor 553 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 554 First Floor 555 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 556 First Floor 557 50010813 Supplying, Fitting and Fixing Industrial Parking Vitrified Floor Tile of 10mm thick (SIZE 300X 300MM)on parking of approved shade laid on 25 mm thick cement mortar (1:1) and filling joints with epoxy grout (2mm) of approved quality including cost of all materials, labour T and P etc required for the works all complete. (For new work only) [NSWI]. Tile make:-NITCO/RAK/VARMORA , Epoxy Grout make:- ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout). Ground Floor 558 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 559 First Floor 560 50011936 Supplying and fixing of TATA Blue scope Steel Sheet Roofing of 0.52 mm thick as per attached Quoatation in roof drilling holes in wind ties including fixing of ridges valleys wind ties and cost of fittings.[NEW-NSWI] Ground Floor 561 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 562 MIS-INE-ADMIN BUIL 563 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 564 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 565 40000952 Recessed wiring to Calling Bell Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular bell push ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-bell push switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 566 40000958 Recessed wiring to Television Point (Modular)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/TV socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK). Ground Floor 567 40000961 Recessed wiring to Telephone Point (socket)with 2 pair 0.5sqmm telephone cable with 20 mm dia non metalic PVC flexible conduit with socket ISI marked MS Box including all accessories and connection.( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-s witch-Telephone socket -Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK). Ground Floor 568 40000967 Recessed wiring to Ceiling Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 569 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 570 40000973 Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 571 40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 572 40000979 Recessed wiring to Security Light Point ( MODULAR) (4X24WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 573 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 574 40000985 Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 575 40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 576 40000991 Point wiring for Computer Point ( MODULAR) with 2.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with3 Nos of 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 577 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 578 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 579 40001006 Recessed wiring to submain in 2 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.4)(Make of PVC pipe-AKG/NORPACK) Ground Floor 580 40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor 581 40001015 Recessed wiring to submain in 4 x 10 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.11)(Make of PVC pipe-AKG/NORPACK) Ground Floor 582 40001039 Supply and laying of 50 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 583 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 584 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 585 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 586 40001141 Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 587 40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 588 40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 589 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 590 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 591 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 592 40001190 Supplying and fixing of Call Bell/buzzer ISI marked suitable for DC/AC single phase 230 volts complete as required (CSR sl no-1.30) Ground Floor 593 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 594 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 595 40001258 SUPPLY & FIXING OF POWER DISTRIBUTION BOX,MAKE-NET RACK/VAL RACK Ground Floor 596 40001703 Supply and fixing of 2 way single door MCB box with 1 no 32 AMP DPMCB with sheet steel encloser,distribution board,on surface /recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and power painted including earthing etc as required(Sl no-2.3.6,2.7)[Make-(a)MCB -Legrand/L &T/ABB/SCHNIDER Ground Floor 597 40001876 Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic) Ground Floor 598 40001879 Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK) Ground Floor 599 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 600 40002179 Recessed wiring to Surface Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection .( Make of wire Finolex / L &T / Anchor / Havells/ V guard)Make-switch /-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor 601 40002886 Recessed wiring to bay light Point ( MODULAR) (45WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge . (Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Make-switch/etc-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor 602 40002987 Supply of 20 port Mobile Charging Station including all accessories and connections. Ground Floor 603 40007569 Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate. Ground Floor 604 40007573 Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. Ground Floor 605 40007577 Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. Ground Floor 606 40007703 Supply and fixing of Main Panel board -I/C. 100 A 4P on load change over switch-1 no, 100 Amp four pole MCCB with stud connector (36 KA) -1 No, Bus bar - 4Nos 250 Amp,500 V copper strip , drum insulator for bus bar - 8 Nos & Bus bar sleeving -1 Job , O/G-63 Amp 4P MCB with Stud connector -2 Nos ,40 Amp FPMCB stut connector-2 Nos,63 A DPMCB with Stut connector-2 nos,32 A DPMCB with Stut connector-4 Nos with sheet metal powder coating and door gasket ,door hinges,door locks ,wiring and socketing [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)-Voltmeter,Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor 607 40008024 Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex ) Ground Floor 608 40008035 Sand Bucket as per IS specification . Ground Floor 609 40008037 Bucket stand to store 3nos of Bucket also having aluminium sheet above the atand to prevent the sand from rain/Sunset. Ground Floor 610 40008126 Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR) Ground Floor 611 40008132 Supply & fixing of 600MM (24) WALL MOUNTED AIR CIRCULATOR FAN WITH COMPLETE ACCESSORIES[BROWN/WHITE].including hanging and connections as per instruction of Electrical Engineer-in-charge[MAKE- USHA MODEL-DOMINAIRE WALL/CROMPTON MODEL-ACVOTEX24 WM/HAVELLS/V-GURAD /ANCHOR-PANASONIC) Ground Floor 612 40008142 Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER) Ground Floor 613 40008150 Supply and fixing of 6 way mcb Box ( 8+18)(PDB) with I/C- 63 AMP 4PMCB + 63 AMP 4P RCCB (300MA) & O/G- 20 AMP SP MCB -09 NOS&16 AMP SP MCB -09NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.[Make-(a) MCB/MCCB-Legrand/L&T/ABB/SCHNIDER Ground Floor 614 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 615 40008385 Supply and fixing of on 15 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON(MODEL NO-LSCRM-15W-CDL/LSCSM-15W-CDL)/ PHILIPS(MODEL NO-15W DURASLIM ROUND/SQUARE 165MM/WIPRO(MODEL NO-LD80-131-XXX-60-XX) Ground Floor 616 40008387 Supply and fixing of on 24 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON/ PHILIPS(MODEL NO-22W DURASLIM ROUND/SQUARE 208 MM/WIPRO(MODEL NO-LD80-281-XXX-60-G1) Ground Floor 617 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 618 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 619 40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor 620 40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor 621 40008495 Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL) Ground Floor 622 40008505 Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX) Ground Floor 623 40008507 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszg ,1mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-1-LS)/DIGISOL/MOLEX) Ground Floor 624 40008509 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszh ,2mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-3-LS)/DIGISOL/MOLEX) Ground Floor 625 40008511 Supply & fixing of information outlet with faceplate,single port ,modular straight shu and keystone,cat-6 utp,white,toolless type(MAKE-D-LINK/MOLEX/DIGISOL) Ground Floor 626 40008513 Supplying & fixing of patch panel ,24 PORT,CAT-6 UTP 180 Degree including all accessories and connections(Make-D-Link(Model N o-NPP-C61BLK241)/MOLEX/DIGISOL) Ground Floor 627 40008585 Supply and fixing of surface mounted led 18 w square/round light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON(MODEL NO-LCDSPLN-R-18-CDL/LCDSPLN-S-R-18-CDL)/WIPRO(MODEL N O-LD80-171-XXX-60-SM/PHILIPS(MODEL NO-20W Rd Metal FullGlow LED Surface ) Ground Floor 628 40008586 Supply and fixing of 24 Port Gigabit Smart Managed Switch with 4 Gigabit SFP Ports including all accessories and connection(Make-D-LINK(MODEL NO-DGS-1210-28)/DIGISOL (MODEL NO-DG-GS1528)/MOLEX) Ground Floor 629 40008703 Supply and fixing of 60wt Ceiling mounted high bay LED luminarie with LED lamp including all accessories and connection.(Make- Crompton model-TIP-311-70-57-SL-CP-NSG /wipro/philips) Ground Floor 630 40009312 Supply and installation of 1.5Tr.(5 Star) Inverter Split type Air Conditioner with supply and fixing of 4 KVA ,130-280 Volt voltage range wall/floor mounted stabiliser including all accessories,fastner angle copper piping up to 10ft & connections MAKE of A.C. – CARRIER MODEL NO-EMPERIA DXI/BLUE STAR MODEL NO-IA518ENU,MAKE OF STABILIZER- AUTOTEK/V-GUARD/MICROTEK Ground Floor 631 40009316 Supply and installation of 2.0Tr.(5 Star) Inverter Split type Air Conditioner with supply and fixing of 5 KVA ,130-280 Volt voltage range wall/floor mounted stabiliser including all accessories,fastner angle copper piping up to 10ft & connections MAKE of A.C. – CARRIER MODEL NO-EMPERIA DXI/BLUE STAR MODEL NO-IA/IC524DNU,MAKE OF STABILIZER- AUTOTEK/V-GUARD/MICROTEK Ground Floor 632 40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor 633 MIS-INE-AREA ILLUM 634 40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor 635 40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor 636 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 637 40001367 Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 638 40002155 Supply and fixing of 16 sq.mm 04 core PVC Al. Arm Cableof 1.1 KV grade end termination.(Brass compression) Ground Floor 639 40002239 Supply and laying of 2.5Sqmm 3 Core Cupper Cable 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick (Make of wire Finolex/L &T/Anchor/Havels/V Guard) Ground Floor 640 40002349 Supply & errection of 8.0 Mtr galvanized Octagonal pole ,continuosly tapered,single piece,3mm thick,The face to face dimension is 130mm at bottom and 70mm at top dia.base plate.size is 200 x 200 x16 mm thick The pole should be manufactured from special steel plate suitable for lighting Arrangement System ,Galvanized Founation bolt specification of bolt length 600mm circle dia 200mm bolt size 20mm,Template size is 200mm PCD,thickness 3mm with 10/4 Bakelite Cover,63 Amp 4 way Stud Connector-01No,10 Amp SPMCB-01 No,MCB Channel-01 No,Mudguard Nut,Bolt & washer-06 Nos,Aluminium Socket-08 Nos.(make-Bajaj/havells/RR-ISPAT) Ground Floor 641 40002353 Supply and fixing of 1mtr. Long Galvanized deocartive single arm welded with top canopy at an angle of 120 degree with the pole.The outer dia of arms are 46mm,4 nutbolts suitable for 70mm Top. Ground Floor 642 40002355 Supply and fixing of 1mtr. Long Galvanized deocartive double arm welded with top canopy at an angle of 120 degree with the pole.The outer dia of arms are 46mm,4 nutbolts suitable for 70mm Top. Ground Floor 643 40002360 Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thickness Ground Floor 644 40002497 Supply of outdoor type auxillary panel board made out from 20guage thick CR Sheet duly painted with clamping arrangement to be fixed on street light pole equipped with 04 nos bus bar 03 nos indication lamp with 1 No toggle switch ,1 no timer switch , 1 No Stud type 4 way terminal I/P) 63 Amp ) 1 No 63A TPN MCB, 1 No 3 Pole Contractor 65 A, 1 No Single Pole MCB 10A, 3 Nos 16 amp TPN MCB , 3 Nos Stud type , 4 way terminal (O/P) 63A A with earthing arrangement [Make-(a)MCB /MCCB - Legrand/ Schnider/L &T/ ABB, ( b)Volt meter, Ammeter-AE/CAPPA, (d) all other acessories ISI mark] Ground Floor 645 40003041 Supply, installation, testing and commissioning of GI coil earthing including excavation of earth pit in all kinds of soil/rock filling with charcoal & salt, connections to earthing stids/ bolt of the pole complete including all accesories and connections. Ground Floor 646 40005870 Supply and laying of 25 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI Marked Ground Floor 647 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 648 40008383 Supplying & installation, testing and commissioning of post top lantern of 40 watt LED luminare with all accessories and including connection etc. ( Gate light )(Make-CROMPTON(MODEL NO-LPTO-40-CDL-M (40 WATT)/PHILIPS/WIPRO MODEL NO-LP07-501-XXX-57-CL) Ground Floor 649 40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor 650 40009686 Supply & Fixing of 2 core 6 sqmm Cable end termination Ground Floor 651 40010339 Supply, delivery, errection, testing & commissioning of 20 Meter , 20 sided polygonal hot dip galvanized high mast suitable for wind velocity of 250 KM/HR wind speed or more. The high mast must be supplied in two sections .The top dia and bottom dia of high mast should be 150 mm and 610 mm respectively . The thickness of top and bottom section should be 5 mm and 6 mm respectively . It shall include all accessories like head frame, Two points suspension system with steel wire rope of 6 mm dia, double drum winch ,galvanized lantern carriage with 8 nos. 300 wt LED flood light fitting having die cast aluminium controlgear box complete with ignitor & capacitor. The high mast to be supplied along with LED aviation obstruction light complete with all accessories, lightening final, integral power tool ,1.5 HP motor, EPR trailing cable installed inside the base compartment. 12 nos. 1200mm length foundation bolts for foundation. .outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP conta ctor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals. The scope of work also includes to construct RCC foundation , Erection of high mast, installation of feeder pillar, 2 nos. earthing with 2.5 mtr long 40 mm dia GI earth electrode. . The high mast to be supplied along with double drum winch . Wind tunnel report of high mast shaft should confirm the force coefficient and the mast must be suitable for 250 Km/HR wind speed or more. The entire high mast lighting system should be warrantied for a period of 2 years from the date of handing over . (Make- of Luminaries- Crompton Greaves/ Philips / Wipro )(Make of mast-RR ispat/Bajaj Ground Floor 652 MIS-INE-CCTV 653 40002360 Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thickness Ground Floor 654 40003368 Supply,Installation,Testing and Commissioning of RJ 45/DC Connector as per theTechnical specification and direction of EIC. Ground Floor 655 40008495 Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL) Ground Floor 656 40008498 SUPPLY OF 9U WALL MOUNTED RACK INCLUDING ALL ACCESSORIES AND CONNECTION(MAKE-D-LINK(MODEL NO-NWR-9U-5545-GR)/MOLEX/DIGISOL) Ground Floor 657 40010307 Supply , Installation, testing , commissioning of 4MP IR Network Bullet Camera: (1/3 4MP PS CMOS Image Sensor,Max. 4MP (2560 × 1440) @25/30 30fps,IR Range of 30 Mtrs, Instastream, H.265 and Smart H.264+ dual-stream encoding,DWDR, Day/Night (ICR), 3D-DNR, IP67, PoE Support) Make - CP Plus/ Prama Ground Floor 658 40010309 Supply , Installation, testing , commissioning of 4MP IR Network Dome Camera: (1/3 4MP PS CMOS Image Sensor,Max. 4MP (2560 × 1440) @25/30 30fps,IR Range of 30 Mtrs, Instastream, H.265 and Smart H.264+ dual-stream encoding,DWDR, Day/Night (ICR), 3D-DNR, IP67, PoE Support) Make - CP Plus/ Prama Ground Floor 659 40010313 4MP WDR 32x IR Network PTZ Camera: 1/2.8 2MP CMOS Image sensor (0.9071 centimeters), Max. 50/60fps@4MP, Powerful 32x Optical zoom and 16x Digital zoom, WDR(120dB), 2D/3D-DNR, Day/Night (ICR), EIS, Electronic Defog, ROI, AGC,AWB, BLC, HLC, IR Range of 150 Mtr., Max 300° /s pan speed, 360° endless pan rotation, Support Face Detection, Make - CP Plus/ Prama Ground Floor 660 40010317 Supply , Installation, testing , commissioning of 24 Port Gigabit Ethernet PoE Smart Switch SFP port (192wt)2 . Make-Netgear/Junip er/Aruba Ground Floor 661 40010327 Supply , laying of Cat 6 Cable into PVC Pipe with casing Capping accessories CAT6 UTP Cable with LSZH Roll (305 Mtr) Make- D-link/Digisol Ground Floor 662 40010331 Supply , Installation of PVC IP55 Junction Box Ground Floor 663 40010401 Supply , Installation, testing , commissioning of 32Ch. 4K Network Video Recorder(Instastream/H.265/Smart H.264+/H.264/MJPEG codec decoding, Support 4 SATA HDDs up to 10TB Each,Support Multi-brand network cameras) Make - CP Plus/ Prama Ground Floor 664 40010403 Supply , Installation, testing , commissioning of 8 Port Giga Eth Unmanaged PoE Switch with 6KV surge protection , 150 Watt . Make- Netgear/Juniper/Aruba Ground Floor 665 40010405 Supply , Installation, testing , commissioning of 4-Port Gigabit Ethernet PoE Unmanaged Switch . Make-Netgear/Juniper/Aruba Ground Floor 666 40010407 Supply , Installation, Testing of 8 TB Surveillance HDD, Make- SEGATE/WD Ground Floor 667 40010408 Supply , Installation, Testing of HD Display LED 43 Inches or Higher Make - Samsung /LG Ground Floor 668 40010410 Supply , laying of Solid Cat 6 Outdoor Armed (ECCS Tape) Cable Make- D-link/Digisol Ground Floor 669 40010412 Supply , Installation, testing , commissioning of 1KVA Online UPS with Battery with 30 Mins Backup Make-Numeric/APC/Microtek Ground Floor 670 MIS-INE-DG SET 671 40001036 Supply and laying of 35 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 672 40010576 Design, supply, erection, testing and commissioning of 25 KVA silent type DG set(Only for light, fan , computer & 1 no Acquaguard point) with AMF, 440 V three phase 1500 RPM ,50HZ ,3 Cylinder with 4 nos earthing, 63 AMP 4 POLE CHANGE OVER ,ms pipe exhaust system, residual silencer, thermal logging and cladding of exhaust pipe complete , D.G. Plinth & Shed as per specification as required and as per direction of engineer-in-charge. Make- Mahindra Powerol Ltd/Cumins . Ground Floor 673 MIS-INE-Driver Res 674 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 675 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 676 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 677 40000973 Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 678 40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 679 40000979 Recessed wiring to Security Light Point ( MODULAR) (4X24WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 680 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 681 40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 682 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 683 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 684 40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor 685 40001042 Supply and laying of 70 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 686 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 687 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 688 40001132 Supplying and fixing of 8X6 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor 689 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 690 40001141 Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 691 40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 692 40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 693 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 694 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 695 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 696 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 697 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 698 40001876 Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic) Ground Floor 699 40001879 Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK) Ground Floor 700 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 701 40008126 Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR) Ground Floor 702 40008142 Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER) Ground Floor 703 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 704 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 705 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 706 40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor 707 40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor 708 40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor 709 40010399 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top & bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming- 1 No 200 Amp FP MCCB [35 kA] Busbar : 4 Nos 400A, 500V Electrolytic copper strips Outgoing - 2 nos 125Amp 4PMCCB with stud connector (36 KA) ,3 nos 63 A FPMCB with Stud connector,2 nos 40 A FPMCB with Stud connector,3 nos 63 A DPMCB with Stut connector Instrument - 03 Nos. Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 03 Nos : LED type phase indicating lamps with control fuses,Door gaskets ,Door Hinges,Door locks,Wiring with socketing Ground Floor 710 MIS-INE-EV CHARGER 711 40001039 Supply and laying of 50 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 712 40001045 Supply and laying of 95 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 713 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 714 40001367 Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 715 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 716 40002152 Supply and fixing of 95 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade end termination Ground Floor 717 40002519 Supply & Fixing of 4 core 16 sqmm Cable end termination(Brass comression) Ground Floor 718 40002745 Supply and laying of 50 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI Marked(Brass compression) Ground Floor 719 40003522 Supply and installation of HDPE pipe inspection chambers with die cast lid Ground Floor 720 40006311 Main Distribution Board-Incoming power Distribution Panel/board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes,gasket,powder coated,top & bottom terminals and properly painted with anticorrosive primer and paints,comprising the following [Make-(a)MCB/MCB Box-LEGRAND/ L&T/ ABB/ SCHNIDER (b) meter,Ammeter-AE/CAPPA(c)all other acessories ISI mark] Main incoming- 125 amp. TPNMCCB [25 ka] - 01 set 125 amp. 415 volt cut out - 03 nos. without meter space out going- 63 amp. TPNMCB [10 ka] - 03 nos 125 amp , 25 / 3 mm. copper bus bar - 04 nos indicating lamp and controlling switch - 03 set for 63 amp. tpnmcb instruments 0 – 100 amp. ammeter with selector switch - 01 set 100 / 5 amp. ct - 01 set 0 – 500 volt. voltmeter with selector switch - 01 set indicating lamp with controlling switch - 01 set size – 900 x 900 x 200 mm Ground Floor 721 40006385 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top & bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming- 1 No 200 Amp FP MCCB [35 kA] Busbar : 4 Nos 400A, 500V Electrolytic copper strips Outgoing - 3 nos 125Amp 4PMCCB Busbar : 4 Nos 200A, 500V Electrolytic copper strips 125 Amp FP Change Over ,Bus bar-200A Cupper Busbar ,Instrument-Multifunction meter,Indicator-1 set 3 Nos 63Amp 4PMCCB Instrument - 03 Nos. Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 03 Nos : LED type phase indicating lamps with control fuses Ground Floor 722 40007703 Supply and fixing of Main Panel board -I/C. 100 A 4P on load change over switch-1 no, 100 Amp four pole MCCB with stud connector (36 KA) -1 No, Bus bar - 4Nos 250 Amp,500 V copper strip , drum insulator for bus bar - 8 Nos & Bus bar sleeving -1 Job , O/G-63 Amp 4P MCB with Stud connector -2 Nos ,40 Amp FPMCB stut connector-2 Nos,63 A DPMCB with Stut connector-2 nos,32 A DPMCB with Stut connector-4 Nos with sheet metal powder coating and door gasket ,door hinges,door locks ,wiring and socketing [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)-Voltmeter,Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor 723 40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor 724 40010415 Design,Supply ,erection,testing and commissioning of 10 KW- 3 x 3.3 KW AC E-Rickshaw charger having following specification Input Voltage 415 VAC, 3 ph 5wire(L1, L2, L3, N & PE) Input Frequency 50 Hz Number of Outputs- 3 Output 1 Rating- Each outlet 230VAC, Max 15A (MAKE- Anchor Panasonic/Siemens) Ground Floor 725 MIS-INE-FAST AID K 726 40007577 Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. Ground Floor 727 MIS-INE-FIRE FIGHT 728 40008024 Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex ) Ground Floor 729 40008026 Providing and fixing stored pressure portable (powder type) ABC - 6.0 kg fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug(Make -Fire shield/Kanex/Safex .) Ground Floor 730 40008033 Providing and fixing of 4kg clean agent type fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug (Make -Fire shield/Kanex/Safex .) Ground Floor 731 40008073 Supply and fixing of wall mounting type Auto glow signages of different type like, fire exit with one side arrow /do not use lift in case of fire/Emergency Exit/Staircase Indicating Arrow etc . Sizes :-300x150mm . type .(Make-Prolite autoglow) Ground Floor 732 40008075 Supply and fixing of Location & Map Auto glow Signages . Sizes900x1200mm . Ground Floor 733 MIS-INE-LIGHTING P 734 40002086 Air-Terminal Supply, Installation, Testing & Commissioning of Early Streamer Emission (ESE-30))type Lightning Air Terminal. Supporting Mast The mounting pole used to support the lightning air terminal shall be minimum length of 05 Mtr. , non corrosive and made up of medium class GI / SS pipe of 1.5″ diameter having base plate at bottom for securely fixing the mast on roof top. The mounting pole and supports shall be securely fixed with the brackets and PVC insulated metallic guy wires to withstand the maximum wind velocity of that area. Protection Radius :- 48 Mtr Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 735 40002089 Lightning Strike Counter Supply, Installation, Testing & Commissioning of non-electronic & non-resettable (Not require any external power supply) type lightning strike counter to count the lightning stroke having display with IP-67 enclosure including all accessories and connection..(6/7 digit) Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Engineer-in-Charge. Ground Floor 736 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 737 40002098 Supply, connection &Testing of sub earthing with 16 Sq.mm single core multi stranded copper flexible wire from surge protection device (SPD) panel to earth electrode & Main panel board to SPD panel including all accessories, cable socketing and connections. Make :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge Ground Floor 738 40002101 Supply, Installation, Testing & Commissioning of indoor type wall mounted Surge protection device (SPD) panel made of 2 mm thick CRCA sheet, dust and vermin proof duly powder coated having the following arrangement & complete factory wired by 16 Sq.mm single core multi stranded copper flexible wire. [A] Type 1+2 AC Surge Protection Device (SPD) (TP+N) (50 KA) - 01 Set [B] 63 Amp. HRC fuse with link – 03 Nos [C] 100 Amp. 4 pole stud connector – 01 No Make of SPD & HRC Fuse :- HAVELLS / L&T / LEGRAND Make of Wire :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 739 40002720 Supply and laying of 70sqmm single core FR PVC insulated unseathed copper conductor for voltage grade 1100 volt as per IS-694 in sur face/underground as required(sl no-5.5.2)(Make-KEI/FINOLEX/HAVELLS) Ground Floor 740 MIS-INE-ONGRID SOL 741 40003442 Supply,Installation,Testing & Commissioing of Net Meter in Consultation with Distribution utility. Ground Floor 742 40011901 Design,Supply,Installation,Testing & Commissioing of Grid Connected Roof top solar PV System(Through net metering)(Make-Solar PV Panel(VIKRAM/WARREE/TATA POWER SOLAR SYSTEM/PANASONIC SOLAR) ,Solar-P.C.U-LUMINOUS/STATCON/MICROTEK/SU-KAM POWER SYSTEM,Solar Battery-EXIDE/OKAYA/LUMNOUS,DC and AC distribution-MCB-Legrand/L &T,HRC fuse-L&T/ABB,Copper cable-Finolex/Havells/Polycab) Ground Floor 743 MIS-INE-PA SYSTEM 744 40001708 Wiring to Loudspeaker with 2x1.5 sqmm stranded copper conductor unarmoured cable for loud speakers clamped with PVC pipe saddles,base etc.on ceiling/wall complete including termination,testing etc as required (Make-Finolex/Anchor/Havells/V-guard) Ground Floor 745 40001709 Installation,testing,commissioning charges of audio system. Ground Floor 746 40004559 Supplying and fixing of 25 mm dia conduit of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.( Sudhakar / AKG / BEC/ANCHOR) Ground Floor 747 40008481 Supply of wall mounted speaker make- Ahuja (ASX-312bt) including all accessories. Ground Floor 748 40008483 Supply of wireless speaker Microphone Make-Ahuja(AWM 700UH)including all accessories Ground Floor 749 40008487 Supply of Audio amplifier Make-Ahuja(SSA-250DP) including all accessories Ground Floor 750 40010436 Supply of 30 Watts Outdoor Horn Speaker ( Make- Ahuja/ Sonodyne) Ground Floor 751 40010439 Supply of ahuja Two Way Counter Communication System (Make-ahuja (CCS-2300 ) Ground Floor 752 MIS-INE-SECURITY R 753 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 754 40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 755 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 756 40000985 Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 757 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 758 40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor 759 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 760 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 761 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 762 40001237 Supply and fixing of 4 way , single Door MCB Box with 1 No 32 Amp. DP MCB & 2 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.,2.7, )Make-MCB-(Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC) Ground Floor 763 40008124 Supply & fixing of 400mm (16) wall mounted fan with complete accessories[brown/white].including hanging and connections [MAKE- USHA MODEL-MIST AIR DUOS/ CROMPTON MODEL-TROPEDO HI SPEED//HAVELLS/V-GURAD MODEL-PETAL WF 17/ANCHOR) Ground Floor 764 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 765 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 766 40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor 767 MIS-INE-SHOP 768 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 769 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 770 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 771 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 772 40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 773 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 774 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 775 40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor 776 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 777 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 778 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 779 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 780 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 781 40001187 Supply and fixing of 8 way , Double Door MCB Box with 1 No 32 Amp. DP MCB & 6 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )Make-MCB-(Legrand/L&T/ABB/SCHNIDER) Ground Floor 782 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 783 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 784 40002179 Recessed wiring to Surface Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection .( Make of wire Finolex / L &T / Anchor / Havells/ V guard)Make-switch /-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor 785 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 786 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 787 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 788 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 789 40008585 Supply and fixing of surface mounted led 18 w square/round light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON(MODEL NO-LCDSPLN-R-18-CDL/LCDSPLN-S-R-18-CDL)/WIPRO(MODEL N O-LD80-171-XXX-60-SM/PHILIPS(MODEL NO-20W Rd Metal FullGlow LED Surface ) Ground Floor 790 MIS-INE-VIDEO WALL 791 40010417 LED Display Board 126 LX63 H/10LX63H/80LX63HP outdoor 6 pixel density 160000 dots/sqm module resolution128x64 dots frame frequency 60Hz single LED unit pixel ,brightness 800-1000cd/sqm,gray scale up to 16bit /2.81 billion,optimum viewing angle 140x120,input voltage 220V AC ,operating tempreature 200C to 500C,Cabinet size 960mmx960mm die cast,english/odia/any language for text,video,image,outdoor active LED video fixed on unipole structure with ACB box with supply and installation.Thickness of the screen>120mm wall(BIS certified module)LED:NATION STAR SMP. Ground Floor 792 40010419 Novastar TB 40 processor with 4G module(BIS certified module),Novastar IND 528 receiving card,cloud based software inbuilt,LAN/Cloud data entry system having multiscreen playback synchronization mechanism (Make-Novastar TB 40) Ground Floor 793 40010423 Fixing of frame unipole structure 106x63 with ACP box for supporting LED sign board 40x40x3 mmsq SS 304 grade pipe and top plate for pole 580x500x12 mm with base plate 450x450x20mm and single pole size 275mm diax5x3000mm working platfrom made by 25x25x3 mm SS-304 grade square pipe panel size 768x768mm of ACP work(Make-Ahuja 100 watt speaker SS-304 JINDAL/NIPPON STEEL of premium quality. Ground Floor 794 40010428 LED Display Board 12.2 length X 4.2height.,10.6 length X 4.2height. Indoor P 2.5 pixel, density 160000 dots/sqm, module resolution 128x64 dots, module dimension 320 x160x15 mm frame frequency 60hz, single LED unit pixel, brightness 800-1000cd/sqm, gray scale up to 16bit/2.81 billion, optimum viewing angle 140x120, input voltage 220V AC, operating temperature 20°C to 50°C, cabinate size 320mmX160mm magnetic module, english/odiya/ any language for text, video, image, Indoor Active LED Video fixed on wall mounting with steel structure supply and installation Thickness of the screen>60mm Wall. (BIS certified module) LED: NATION STAR SMP. Ground Floor 795 MIS-INE-WORK SHOP 796 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 797 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 798 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 799 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 800 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 801 40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor 802 40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor 803 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 804 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 805 40001132 Supplying and fixing of 8X6 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor 806 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 807 40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 808 40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 809 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 810 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 811 40001166 Supply and fixing of 63 AMP 4P MCB-1NO,63 AMP,415 V CUTOUT-3 NOS WITH COPPER BUS BAR & INDICATOR ETC including all accessories and connections . [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor 812 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 813 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 814 40001228 Supply & fixing of 45 W LED STREET LIGHT FITTING on wall with , G.I. Bracket, Clamp & Nut Bolt connecting wire all accessories refer to catalouge No- MAKE- CROMPTON, CODE-LSTO-45-CDL /MAKE-PHILIPS, MODEL-GREEN LINE , CODE-BRP320 / MAKE-HPL, CODE-HPLLEDST4060S & HPLLEDSL4560S including fixing and connections as per instruction of Electrical Engineer-in-charge. Ground Floor 815 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 816 40001653 Recessed wiring to Security Light Point (1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge . ( Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Ground Floor 817 40002173 Point wiring for Instrument Point(modular) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 2 nos of 15/16 Amp, 250 V modular type switch & socket ,& 2 nos 5 amp modular type switch & socket phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required as per direction of Engineer in charge . ( Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Ground Floor 818 40002868 Supply and fixing of 4 way , single Door MCB Box with 1 No 63 Amp. 4P Isolator with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.,2.7, ) Ground Floor 819 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 820 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 821 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 822 MIS-IPH-Drivers R 823 10000314 Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.Porcelin 23 inch LWC(ORISSA Pan) Ground Floor 824 10001056 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes. Ground Floor 825 10001058 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes. Ground Floor 826 10001060 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes. Ground Floor 827 10001064 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 828 10001066 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 829 10001068 Providing and fixing on wall face PVC 110 mm dia. offset SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. offset PVC SWR type. Ground Floor 830 10001070 Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type. Ground Floor 831 10001072 Providing and fixing on wall face 110mm dia. plain bend PVC SWR type moulded fittings / accessories for Rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Plain Bend PVC SWR type. Ground Floor 832 10001074 Providing and fixing on wall face 110mm dia. bend with door PVC SWR type moulded fittings / accessories for rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Bend with door PVC SWR type. Ground Floor 833 10001076 Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type. Ground Floor 834 10001088 Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall. Ground Floor 835 10001094 Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm. Ground Floor 836 10001098 Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX 110mm Dia Inlet & Outlet floor trap PVC SWR type. Ground Floor 837 10001100 Providing and fixing EWC Commode floor mount(S/P trap) conforming to IS 2556: Part 3- 2004 duly fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification without cistern - Long pattern size 575x345x390mm. Make: Hindware POPULAR (CAT NO-20044 S-TRAP-28.5/P-TRAP-18.0)/Parryware ELITE (P-TRAP-CO278/S-TRAP-CO297) White Vitreous China Wash Down Water Closet (EWC). Ground Floor 838 10001116 Providing and Fixing PVC LOW LEVEL CYSTERN conforming to IS 2556 : Part 3- 2004 SIZE 415X130X305mm.Make: Hindware SUPERB (CAT NO-50 8829)/Parryware SLIMLINE ECONOMY (E-8090).White Vitreous china 10 litre (full flush) capacity manually controlled low level flushing cistern with all fittings and fixtures. Ground Floor 839 10001122 Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm. Ground Floor 840 10001124 Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 841 10001126 Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 842 10001130 Providing and fixing of 15mm dia. CP Screw-down short body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR(CON-047KN-)/ KOHLER (K-27490IN-CP). 15mm diameter Short body bib cock. Ground Floor 843 10001132 Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock. Ground Floor 844 10001134 Providing and fixing of 15mm CP dia. Screw-down long body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR( CON-107KN)/ KOHLER (K-27490IN-CP) 15mm dia. Long body bib cock. Ground Floor 845 10001136 Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock. Ground Floor 846 10001138 Providing and fixing of Screw-down 15 mm CP concealed Stop Cock with fitting sleeve, operating lever and adjustable wall flange and concealed body conforming to of the following nominal sizes as per specification complete. (Deluxe Headand high quality). Make: JAQUAR-(CON-083FTK+ALD-083FT). 15mm diameter Concealed Stop Cock. Ground Floor 847 10001140 Providing and fixing of 15mm dia. CP overhead shower rose 100mm round with rubit cleaning system including polishing all complete as per specification.(Deluxe Head and Heavy quality). Make: JAQUAR (OHS-1989)/ KOHLER (K-163561N-A-CP). 100 mm diameter / 15 – 20 mm width shower rose. Ground Floor 848 10001142 Providing and fixing of 15mm dia. CP shower arm 160mm long light body round shape for wall mounted with flange. including polishing all complete as per specification. (Deluxe Head and Heavy quality). Make: JAQUAR (SHA -477)/ KOHLER (K-99054IN-CP). 15 mm x 160 mm long size CP shower arm. Ground Floor 849 10001146 Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet. Ground Floor 850 10001148 Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder. Ground Floor 851 10001150 Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self. Ground Floor 852 10001152 Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail. Ground Floor 853 10001154 Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange. Ground Floor 854 10001158 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification.(AR-2013,SL. NO.-3.4.26). Make: Mirror Glass (SAINT GOBIN/AIS(ASAHI)). 600mm x450mm Bevelled Edge Mirror (Heavy quality). Ground Floor 855 10001160 Providing and fixing Rotational moulded polyethylene cylindrical vertical water storage tank 3layer wall conforming to IS : 12701--1996 including cutting holes through the tank and fixing, fittings CPVC tubes and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting up to a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification. Make: SINTEX/SUPREME/ORIPLAST. Triple Layer Cylindrical Vertical water storage tanks. Ground Floor 856 10001166 Fixing wash basins WITHOUT PEDESTALwith hole for pillar taps with 10mm dia M S rack bolt (JAQUAR MAKE) painted white including cutting holes in walls and making good the damages etc all complete, with fixing of 15mm dia pillar cock, as per specification.(Vitreous china flat back wash basin 550x400x200 mm)(CODE CNS-WHT-801 JAQUAR MAKE).Pillar cock(CON-021 JAQUAR)32mm full/half thread CP waste(ALD-705/709-JAQUAR), Rack bolt(ZPS-MST-RB03)Vitreous china flat back wash basin 550x400x200mm . Ground Floor 857 10001209 Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish. Ground Floor 858 SIG 859 50014253 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering<(>,<)>fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel-JINDAL/NIPPON of premium quality, Signage-3M (90CM EQUILATERAL TRIANGLE)# Ground Floor 860 50014255 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (80cmX60cm Rectangular) Ground Floor 861 50014257 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60cm circular) Ground Floor 862 50014259 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (90cm circular size) Ground Floor 863 50014261 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60CmX45Cm Rectangular) Ground Floor 864 50014263 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (90 cm high octagon) Ground Floor 865 50014265 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60X60 cm square) Ground Floor 866 50014267 Manufacturing, supplying and fixing informative retro reflective sign boards/ prismatic retro reflective information sign board made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c and screws and anchor bolts including making holes in plates, providing & fixing ACP message plate of required size. The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect to fix on the wall. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M Ground Floor 867 50014269 Manufacturing, supplying and fixing retro reflective sign boards (single side) 8’x6’ made up of 3mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 40mmx40mm along with theft resistant measures, mounted and fixed with 4 Nos. S.S. square tube of 40mmx40mm to a vertical post made up to S.S. tube of schedule 40 of 50mm dia welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 50mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. FOR 2 VERTICAL POSTS. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M Ground Floor 868 a) APPROVED MAKE /BRAND FOR CEMENT : ULTRATECH, NUVOCO, ACC, JSW (PSC),RAMCO(PSC),DALMIA(PSC),SAGAR(PSC) 869 APPROVED MAKE / BRANDS ARE TO BE UTILISED STRICTLY DURING EXECUTION OF ABOVE RELATED ITEMS OF WORK 870 Provision For 5 Year Repair & Maintenance (as stated in DTCN cl no.111) 1.75% 871 CESS
Contract Date: Jan 28, 2026 Contract Value : ₹ 6.54 Crore
Government Departments No of Bidders 9
Odisha View Result →
12.
Defence #8520278 AOC
Tender For Repair/Replacement And Maint Of Sewage Line, Manholes Incl Attending Day To Day Complaints, Certain Other Misc B/R Works At Tarapore Enclave Under Age B/R-Ii Of Ge (South) Delhi Cantt-10.; (a) One bag capacity concrete mixer 01 No (b) Vibrator (Needle and Plate Type) 01 No Each (c) Steel shuttering with spans, props etc 100 Sqm (d) Trucks/Tippers 02 No (e) DG Sets 5/10 KVA 01 No (g) Total Stations 01 No (h) Concrete cube testing machine (Hydraulically operated) 01 No (k) Concrete Pumps 02 No (l) Concrete mobile weigh batchers 01 No (m) Drilling Machines 02 No (n) Meggar 01 No (o) Bar Bending table electrically operated 01 No B/R ITEMS 1 PRESSED STEEL DOOR FRAMES / CHOWKHATS FOR DOORS / CUPBOARD AND WINDOW FRAMES PARSHOTAM STEEL INDUSTRIES(PSI), SHAKTI, MADHU INDUSTRIES, ASHISH INDUSTRIES 2 STEEL WINDOWS/VENTS / DOOR FRMES/ROLLED FRAMES GI SECTION WINDOWS (PRE PAINTED / COLOUR COATED) TATA PRAVESH, PARSHOTAM STEEL INDUSTRIES(PSI), SHAKTI, MADHU INDUSTRIES, ASHISH INDUSTRIES 3 ROLLING SHUTTERS & ROLLING GRILLS PARSHOTAM STEEL INDUSTRIES(PSI), ASHISH INDUSTRIES,MADHU INDUSTRIES 4 WELDED WIRE MESH / FABRIC MULTIWELD WIRE CO LTD, MUMBAI, JAINSONS SALES CORP, DELHI, JAISONS INDUSTRIES 5 FACTORY MADE PANELLED DOOR SHUTTERS CENTURY PLYBOARD (INDIA) PVT LTD, GREENPLY, JAIN DOORS PVT LTD, EVEREST, A-1 TEAK PRODUCTS 6 FACTORY MADE FLUSH DOOR SHUTTERS CENTURY PLYBOARD (INDIA) PVT LTD, GREENPLY, JAIN DOORS PVT LTD, EVEREST, A-1 TEAK PRODUCTS 7 PVC DOOR FRAME, CHOWKAT, PANEL, DOOR/WINDOW SINTEX, RAJSHRIPLASTIWOOD LTD,M/S FENESTA, ECOCELL, POLYLINE, 8 UPVC WINDOWS/DOORS FENESTA,SUPREME, ENCRAFT, RAJSHREE PLASTIWOOD, ECOCELL 9 STANDARD MORTICE LOCK GODREJ, HARRISON, LINK 10 HYDRAULIC DOOR CLOSER EVEREST, UNIVERSAL, GODREJ 11 ANODISED ALUMINIUM DOORS/WINDOWS/FRAMES/PARTITIONS FENESTA, JINDAL, INDAL, HINDALCO, KALCO, ALPURE, AXSYS. 12 ALUMINIUM WOODEN DOOR AND WINDOW FITTINGS ARGENT INDUSTRIES, CROWN , ALUMINIUM UDYOG NEW DELHI (BRAND-GLOBAL), 13 ALUMINIUM SECTION HINDALCO, JINDAL, NALCO, FENESTA 14 ALUMINIUM SHEETS HINDALCO, JINDAL, NALCO, FENESTA 15 ALUMINIUM COMPOSITE PANELS ALCOBOND, ALSTRONG, ALSTONE 16 PARTICLE BOARD (VENEERED & UNVENEERED LAMINATED) KITPLY, GREEN PLY INDUSTRIES LTD, CENTURY PLY, ROYAL TOUCHE LAMINATES, GREEN PANEL 17 PLYWOOD FOR GENERAL PURPOSES KITPLY, GREEN PLY INDUSTRIES LTD, CENTURY PLY 18 DECORATIVE LAMINATES KITPLY, GREEN PLY INDUSTRIES LTD, CENTURY PLY, ROYAL TOUCHE LAMINATES, GREEN PANEL, GREELAM 19 FIBRE BOARD (MEDIUM DENSITY) / PLAIN & PRE LAMINATED MDF & HDF BOARDS KITPLY, GREEN PLY INDUSTRIES LTD, CENTURY PLY 20 PRE FAB PANEL BOARDS/WALL LINING /CEILING TILES LAFARGE, BORAL GYPSUM BOARD PVT LTD, EVEREST, ARMSTRONG, GYPROC 21 GALVANISED STEEL SHEETS & COLOUR COATED GALVANISED STEEL SHEETS SAIL, TATA, JINDAL, JSW, , DURAROOF 22 POLYCARBONATE SHEETS DURATUFF, LEXAN, VMT PLASTE LTD M/S COXWELL DOMES ENGG PVT LTD, FIBREWAYS. 23 GALVALUME SHEETS SAIL, TATA, BLUESCOPE JINDAL, JSW, DURAROOF 24 AC SHEETS/AC BOARDS (CORRUGATED, SEMI CORRUGATED) CHARMINAR, RAMCO, EVEREST 25 GYPSUM BOARD SAINT GOBAIN (GYPROC), USG BORAL, ARMSTRONG, LAFARGE, EVEREST 26 PVC TILES/SHEETS PRIMER POLYFILM LTD, WONDER FLOOR, ARMSTRONG 27 GLASS MOSAIC TILES JOHNSON, ITALIA, CORAL MOSAIC, NITCO 28 TERRAZZO TILES/PPC TILES/PPC CHEQUERED TILES NITCO, EUROCON, SURYA KIRAN. JAIN TILES INDUSTRIES HALDWANI (JTI) 29 INTERLOCKING TILES/EXTERIOR TILES/PAVER BLOCKS ISI marked and confirming to relavent IS 30 DECORATIVE TEXTURE/COATING UNITILE, BAKELITE HYLAM (HERITAGE), NCL ALTEKSECCOLOR, DULUX (ACRATEX), APEX (DURACAST), BRITISH (XTRACEM 76), LUXTURE, BSC RUSTIC SUPERFINE, ACRO PAINTS. 31 EXPOSED BRICK FAÇADE UNISTONE, PIONEER BRICKS, REGENT TILES 32 GLAZED EARTHEN WARE TILES AGL, SOMANY, NITCO 33 GLAZED CERAMIC/NON SKID WALL/FLOOR TILES KAJARIA, , CERA, SOMANI, NITCO, SIMPOLO, VARMORA, ORIENT (BELL), AGL, 34 VITIRFIED TILES (NORMAL/ANTI SKID) KAJARIA, , CERA, SOMANI, NITCO, SIMPOLO, VARMORA, ORIENT (BELL), AGL, 35 HDPE & LLDPE STORAGE WATER TANKS SINTEX, POLYCON, VECTUS, SUPREME. 36 SANITARY APPLIANCES/ FITTINGS(CHINAWARE) HINDWARE, PARRYWARE, CERA, JAGUAR, KEROVIT. 37 WATER CLOSET SEATS AND COVER (SOLID BAKELITE) THERMOSTAT MOULDED TOILET SEAT COVER PARRYWARE, JAGUAR, CERA, HINDWARE 38 HEALTH FAUCET HINDWARE, JAGUAR, CERA, PARRYWARE 39 PVC FLUSHING CISTERNS HINDWARE, PARRYWARE, CERA, JAGUAR 40 STAINLESS STEEL KITCHEN SINK WITH OR WITHOUT DRAINING BOARD, PLATE RACK HINDWARE, PARYAG, CERA, SILVERSHINE, 41 STAINLESS STEEL PLATE RACK SPC, PRAYAG, SILVERSHINE, SHAKTI, JAINCO, NIRALI, 42 BALL VALVES (HORIZONTAL PLUNGER TYPE) PRAYAG, PRIMA, JAINKO, ZOLOTO 43 SHOWER ROSES CHROMIUM PLATED (SWIVEL TYPE) JAGUAR, SOMANY, PRAYAG, HINDWARE, PARRYWARE, CERA 44 BATH ROOM FANCY FITTINGS / CP FITTINGS BRASS, FAUCETS & FIXTURES JAGUAR, CERA, KOHLER, AP ROYALE& BATHSENSE, ESSCO, 45 BIP TAPS AND STOP TAPS (CP) FANCY FITTINGS JAGUAR, CERA, KOHLER, AP ROYALE& BATHSENSE, ESSCO 46 SALT GLAZED STONE WARE PIPES/GLAZED STONE WARE PIPES SFMC, SUPERME, ASTRAL, VECTUS 47 CONCRETE HUME PIPES INDIAN HUME PIPE COMPANY, KB SPUN, SVRCC 48 PVC RAIN WATER PIPE/SEWAGE PIPE SUPREME, FINOLEX, ASTRAL, PRAYAG 49 GI PIPE/FITTINGS JINDAL, TATA, SWASTIK, APL APPLO 50 CI PIPE/FITTINGS (FOR SEWAGE/RAINWATER) SKF, (SINGHAL IRON FOUNDRY), JINDAL SAW, NECO (JAYASWAL), ELCTROSTEEL, HEPCO 51 SOIL WASTE PIPE FITTINGS/STEEL MANHOLE COVER SKF, (SINGHAL IRON FOUNDRY), JINDAL SAW, NECO (JAYASWAL), ELCTROSTEEL, HEPCO 52 PPR PIPES/SWR/CPVC/COMPOSITE PIPES AND FITTINGS SFMC, VECTUS, ASHIRWAD, SUPREME, FINOLEX, PRINCE 53 HDPE PIPES/SNR PIPES/ DWC (HDPE) PIPE (WATER/SEWAGE) ASTRAL, FINOLEX, SFMC, SUPREME 54 SAND CAST IRON SPIGOT & SOCKET SOIL WASTE, VENT PIPES & FITTINGS SKF, (SINGHAL IRON FOUNDRY), JINDAL SAW, NECO (JAYASWAL), ELCTROSTEEL, HEPCO 55 CEMENT BASED PAINTS SNOWCEM, ASIAN, BERGER, ACRO PAINTS 56 DRY DISTEMPER/OIL BOUND DISTEMPER/PLASTIC EMULSION/EXTERIOR EMULSION/SILICON PAINTS & COATING NEROLAC PAINTS, BERGER PAINTS, ASIAN PAINTS, BIRLA OPUS PAINTS 57 PLASTIC EMULSION PAINT NEROLAC PAINTS, BERGER PAINTS, ASIAN PAINTS, BIRLA OPUS PAINTS 58 PAINT EXTERIOR BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL), BIRLA OPUS PAINTS 59 SYNTHETIC ENAMEL PAINT NEROLAC PAINTS, BERGER PAINTS, ASIAN PAINTS, BIRLA OPUS PAINTS 60 FALSE CEILING TILES/BOARD (GYPSUM BOARD/POP/MINERAL FIBRE) GYPROC, ARMSTRONG, EVEREST, LAFARGE, USG BORAL, 61 MIRROR LOOKING SAINT GOBAIN, MODI FLOAT, TRIVENI FLOAT GLASS, HINDWARE, PRAYAG, CERA 62 PTMT FITTING PRAYAG, PRIMA VECTUS, SHAKTI, POLYTUF, JAINKO, POLYPLAST 63 FRP DOOR / FRAME SHUTTER, CHAJJAS FIBREWAYS, ROOFFIT, SPC 64 WPC DOOR, WINDOWS & FRAME, JALI, SHEET RAJSHRI PLASTIWOOD, ALSTONE, ECOCELL/ECHON, GIZA 65 PVC WALL PANELING HR ENTERPRISES, ECOCELL, POLYLINE, DECOINN, SUNBEAM, RAJSHREE PLASTIWOOD 66 HDF/PVC DOOR FRAME SHUTTER HR ENTERPRISES, POLYLINE, ECOCELL/ ECHON, 67 MS PIPES APL, APPOLO, BHUSHAN 68 PVC MOULDED DOORS ECO CELL/ECHON, RAJSHREE, POLYLINE 69 BRASS VALVE PRAYAG, ZOLOTO, L&T VALVES, AMCO, VIP VALVES 70 ROOF TILES, /KERB STONE/ PCC BLOCK MOHINDRA INDUSTRIES, HARIOM TILES & PAVERS, NITCO, JOHNSON, SURYA KIRAN, SOMANY. JAIN TILES INDUSTRIES HALDWANI (JTI) 71 FLY ASH CEMENT BRICKS KB SPUN, SVRCC 72 UPVC/PVC FALSE CEILING & PANELLING RAJSHRI PLASTIWOOD, POLYLINE, ACCURA, ECOCELL 73 CHAIN LINK FENCING/ BARBED WIRE, PUCHED TAPE CONCERTINA COIL/ RAZOR BLADE TAPE FENCING A-1 FENCE, ARMSTRONG WIRES, MAIMOM ROGER, 74 APP MEMBRANE IWL, STP, ASIAN, TORCHTAR 75 READY MIX MORTAR BIRLA, ACC, ULTRATECH, JK CEMENT .... more in document
Contract Date: Dec 26, 2025 Contract Value : ₹ 29.53 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Delhi View Result →
13.
Defence #8502177 AOC
Tender For Special Repair To Building No T-42 At Fort Area Under Ge Kamptee.; 1 Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 2 Demolation of cement concrete in ground floor and paving nexc 15cm thk below or above ground levelas specified and directed. 3 M&L for providing 25 mm thick PCC 1:2:4 Type B-2 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and as directed. 4 M&L colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as directed. 5 M&L vitrifiedceramic tiles 10 mm thick(square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqmin floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 with fixing of using by spacers & filled with epoxy grouting complete all as specified and as directed. 6 M&L vitrifiedceramic tiles 10 mm thick(square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqmin Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as directed. 7 M&L joint free colored non skid ceramic tiles 6 to 7 mm thick(square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and as directed. 8 M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqmin Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted. 9 M&L joint free colored non skid ceramic tiles 6 to 7 mm thick(square or rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and as directed. 10 M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granitecomplete all as specified and as directed. 11 M&L for machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. 12 Rounding to edges of stone slabs one edge , such as in steps ,cooking platforms, and other similar situations complete all as specified and as directed. 13 Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. 14 M&l for rendering 10mm thick in cement plaster in cement mortar 1:6 , finished even and smoothwithout using extra cement complete all as directed. 15 M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction (WPC shall be measured separately) complete all as specified and as directed. 16 Material and labour for rendering 5 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling, finished even and smoothwithout using extra cement complete all as specified and directed. 17 Supply only liquid water proofing admixture of make-pidilite or equivalent complete all as specified and as directed. 18 Dismantling of asbestos cement sheet (corrugated , semi-corrugated etc) sheets in roof coverings complete all as specified and as directed. 19 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as sepcified. 20 S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as sepcified. 21 Dismantlingmild steel work of any description not otherwise provided for complete all as specified and as directed. 22 M&L for Roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165) all as specified and directed 23 S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and as directed. 24 Dismantling wall and ceiling boards ( Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover filletscomplete all as directed. 25 Material and labour 4mm thick forNon asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screwscomplete all as specified and as directed. (Noted: Grid shall be measured seprately) 26 M&L for Gl powder coated snap grid frame work for flase ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 2mm Gl supended wire of suitable length and butter fly clip of size of main Tee shall be 32mmx 15mm x 0.30mm, crossTee shall be 32mm x 15mm x 0.30mm thick and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and as directed. 27 Dismantling timber scantlings in frame work 40 sq. cm and over in section, in any position all as specified and directed. 28 M&L 2nd class hard wood in scantling clean sawn and unframed timber complete all as specified and as directed. 29 Dismantling of brick work or stone/boulder masonary built in cement mortar includingashlar facing dressed stone and pre-cast concrete articlescomplete all as specified and directed 30 M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. 31 M&L for Brickwork with flyash bricks, straight or curvedon plan to any radius in half brick thick walls,built in, built in cement mortar (1:6) complete all as specified and directed. 32 Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area not exc 1.5 sqm complete all as specified and as directed. 33 Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) but area exc 1.50 sqm but not exc 4 sqm complete all as specified and as directed. 34 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel 91/1 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as orginal formation. 35 S&F and 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints. complete all as specified and as directed. 36 S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed. 37 S&F Factory made solid PVC panelled door shutter 30mmthick (Style) consiting of frame made out of MS tubes for top & bottom rails ,MS frame shallbe covered withheat moulded plain coloured PVCC channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and palin colour PVC sheet for Toprail : panelling of plain colour PVC sheet to be fitted in the MS framewelded/sealedto the style and rail withsuitable PVC sheet beading and jointed toghether with solvent cement etc fixed with frame at site complete all as specified and as directed. 38 S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard woodrail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure freated of any number of panel all as directed and directed. 39 S&F 30 mm thick second class hard wood for windows glazed and ,skeleton shutter open and prepared to receive glass , gauge etc. (without sash bars), edge of framing plain,chamfered or rounded. Fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part-I complete all as specified and as directed. 40 S&F Anodized aluminium frame for doors,window,ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. 41 S&F Anodised aluminium window and ventilator shutters, side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified and as directed. 42 Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturers catalogue and specifications complete all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item;(ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint 43 S&F figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm. complete all as specified and as directed. 44 S&F for 150 mm aluminium handles casttype anodised complete all as specified and directed. 45 S&F for 150 mm Extruded brass handles, fabricated type polished complete all as specified and directed. 46 S&F for 300 mm brass sliding door bolts, with hasp, clips of nsheet, cast or extruded section and fixing bolts and sections and fixed complete all as specified and directed. 47 S&F for 150mm floor door stopper brass body of anodised brass body fixed complete all as specified and directed. 48 S&F 150mm longBrass, barrel tower bolt of extruded section complete all as specified and directed 49 S&F mild steel medium weight could roll 100mm size butt hinges complete all as specified and directed 50 S&F Curtain rod with a telescopingbrackets to fit bothrod and mounting hardware modular type complete all as specified and directed. 51 Dismantling of PVC pipes(110mm/75mm bore), jointed in cement mortar and taking out of trenches/from walls including fittings as bands, branch pieces, trapsetc complete all as specified and directed. 52 S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore complete all as specified and as directed. 53 S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed. 54 S&F PVC (SWR) junction double, (double T), equal or unequalof 110mm bore complete all as specified and as directed. 55 S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed. 56 S&F PVC (SWR) bends any radius of 75mm borecomplete all as specified and as directed. 57 S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed. 58 Demolition of RCC of any description and in any postion not otherwise specifically provided for etc complete all as specified and as directed. 59 M&L for TMT bars of 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm etc complete all as specified and as directed. 60 M&L for TMT bars of 8 to 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm in stirrups, spacers and binders complete all as specified and as directed. 61 M&L for cement concrete1:2:4 type B-Iusing 20 mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic bands and other similar bands, parapets, copings, benching, bed plates, kerbsand the like including weathering, slightly rounded or chamfered angles and throating incl waste formwork complete all as specified and as directed. 62 M&L for RCC 1:2:4 Type B1 ( 20mm graded stone aggregate) as in landings, cover slabs, (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 complete all as directed and specified. 63 M&L 75mm thick cement concrete type B-2, 1:2:4 (using 20 mm graded aggregate) ,finished fair and even without using extra cement for plinth protection and similar work complete all as specified and as directed. 64 M&L for cutting chases, pinning in, making good to facings where required and Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed cills, sunshades, shelves, lintels, etc. water tubing or concealed conduit complete all as specified and as directed. 65 S& F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in gauze door /window/ventilators shutters all as specified and directed. 66 Supply & fix 16mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and as directed. 67 Supply & fix 20mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and as directed. 68 Supply & fix 25mmCPVC pipes SDR 11 & Plain CPVC SDR 11 fittingsand fixed to wall including taking up or down existing GI tubing complete all as specified and as directed. 69 S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 1000 litres capacityhoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and as directed. 70 S&F in repairs15mm bore ball brass valves. high pressure with polythenefloat and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. 71 S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including 6 mm dia 50 mm longfixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets fixed in repairs with 32 mm PTMT Flush pipes to pedestal pan, including all joints complete all as specified and as directed. 72 S&F in repairs Single lever basin Mixer without Popup waste with 450mm long Braided Hoses complete all as specified and as directed. 73 S&F in repairs 2 way bib cock with wall fange complete all as specified and as directed. 74 S&F Hand shower (health Faucet) (ABS body) with 8mm dia, 1.2 Meter long Flexible tube & wall Hook all as specified and directed 75 S&F Towel ring squarefixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. 76 S&F Glass Shelf 600mm long fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. 77 S&F Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. 78 S&F Soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. 79 S&F Toilet Paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. 80 S&F in repairs Wall mixer with provision for Overhead Showerwith 115mm Long bend pipe on Upper Side, connecting Legs & wall Flanges complete all as specified and as directed. 81 S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified and directed. 82 S&F in repairs 15mm dia brass C.P fancy Type stop valves Complete all as specified and directed. 83 S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. 84 S&Fin repairsfloor trap100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed. 85 Supply & fixed in repairs Wash Hand basin ( flatback or angle back )of size 550 X 400 MM whiteincluding , waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets includingsupply & fixing of waste pipe complete all as specified and as directed. 86 S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 87 S&F in repairs 40mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed complete all as specified andas directed. 88 Demolition of 150mm dia cement concrete bed in haunching and breaking up drain pipes SGSW set in cement mortar of the following dia complete all as specified andas directed. 89 M&L for concrete bed to drain pipes for 150mm dia pipe including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 complete all as specified andas directed. 90 M&L Salt glazed stoneware drain pipe 150mm dia laid in trenches and jointed as specified. 91 Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition etc complete all as specified and directed. 92 M&L 18 mm thick prelaminated particle board, Exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete allasspecified. 93 M&L 18mm thick Plywood, grade BWR, type BB fixed with screws to timber frame work with beading as requiredcomplete all as specified and directed. 94 M&L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all a specified and directed. 95 Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and as directed. 96 M & L for preparation of old steel surafces of any description over 10 cm width or girth & applying two caots of synthetic enamel complete all as specified and directed 97 M&L for preparation of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paintcomplete all as specified and directed. 98 Preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and directed. 99 M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat ofbirla white care puttycomplete all as specified and directed 100 M&L for complete removal of existing treatmentof walls and applying two coats of oil bound distemper over a coat ofbirla white care puttycomplete all as specified and directed 101 M&L for complete removal of existing treatment and preparation of surfaces and applying two coats of weather shield paintover a coat of primer complete all as specified and directed. 102 M&L for Preparing new plastered surface and applying two coat weather shield paint (appex) over a coat of primer complete all asspecified and directed. 103 Material and labour for applying two coats of oil bound distemper on ceiling overacoatpriming paint including preparation of new surfaces complete all as specified. 104 M&L for complete removal of existing treatment and preparation of surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed. 105 M&L Plain Cement concrete in sub bases/pavings Type D2 1:4:8 (40mm graded aggregate) all as specified and directed. 106 M&LHardcore broken stone of gauge n exc. 63 mm, deposited, spread andlevelled in layers n exc. 15cm thick,wateredand rammed to a true surfacecomplete all as specified and as directed. 107 M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringcomplete all as specified and directed. 108 M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering throating and necessary formwork complete all as specified. 109 Supply and fixstainless steelauto closing hydraulic hinges fixed with self-tapping screw as in position required and complete all as specified and directed 110 Supply and fixstainless steel modular handle 4 inch fixed with self-tapping screw as in position required and complete all as specified and directed. 111 Supply and fix magnetic catcher of size 20mmx50mm suitable for cup board shutter complete all as specified and as directed. 112 Taking down point wiring of any type (copper/aluminum), light fittings of any type and any size, switches, sockets, regulators, bell push, call bell, ceiling rose, switch boards, etc and making good to the disturbed surfaces of walls/ floor including white washing/ colour washing/ distemper to match with existing finishes, complete all as specified and directed. 113 M&L for Point wiring completeforOne light/Fan/Exhaust Fan point controlled by one switch with PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade FRLSH PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed onsurface of wall/ceiling including earth wire of same size, pressed steel modular boxessunk on wall incl modular coverwith frame of any size complete including dummy switches wherever required all as specified and making good disturbed surfaces.Note :- Cost of cable of size 2.5 sqmm FRLSH provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. 114 All as per item No 113.00 abovebut One 3 pin 6 amp socket out point on the same board with other switches complete all as specified and directed. 115 All as per item No 02 above but with cable size 2.5 sqmm for One 3 pin 6 amps socket out let point on independent board complete all as specified and directed. 116 All as per item No 113.00 above but one light point controlled by two, two way switches complete all as specified and directed. 117 All as per item No 113.00 above but One bell/buzzer point controlled by one bell push complete all as specified and directed. 118 All as per item No 113.00 here in before but with cable size 4 Sq mm for one 5 pin 16 Amps socket out let on independent board, complete all as specified and directed 119 Supply & Fix modular20 Amp Heavy Duty MCB COMBO Box, 4 module with MCB SP of capacity 20 Amp, for AC complete all as specified and directed. 120 Supply and fixing modular switch piano single pole, 1-way ,6 Amps, 230 volts, 1 module, complete all as specified and directed. 121 Supply and fixing modular switch piano single pole, 2-way 6 Amps, 230 volts,1 module, complete all as specified and directed. 122 Supply and fixing modular switch piano flush type 16 Amps, 230 volts,single pole one way, one module, complete all as specified and directed. 123 Supply and fixing modular socket outlet2/3 pin 6 Amps, 230 volts,2 module, complete all as specified and directed. 124 Supply and fixing modular socketmultipurpose 3 pin 6/16 Amps, , 230 volts, combined 2 module, complete all as specified and directed. 125 Supply and fixing modular step typetwo module electronic fan regulator heavy duty 120 watts, five steps, 230 volts , complete all as specified and directed. 126 Supply and fixing Modular Bell push 6 Amp , 230 volts,2 module pole, 1-way, complete all as specified and directed. 127 Supply and fixing in repaircall bell, Ding dong type, 230 volts AC single pole complete all as specified and directed. 128 Supplying & fixing for ceiling rose PVC Polycarbonate isolated body, three terminals, complete all as specified and directed. 129 Supplying and fixing LED batten, 4,20 watt (cool/warm white), surface / wall mounted with polycarbonate housing, high optically efficient polycarbonate diffuser, luminaire lumens >1900 lms, luminous efficiency > 90 lm /watt, LED binning as per ANSI Bin C78.377A as per IEC 624718 & electrical insulation class 1,IP20, 50000 burning hrs (min) as per L 70 criteria, complete all as specified and directed. 130 S & F surfacemounted mirrorlight of capacity 5 watt, , 230 voltswith CRCA housing with and intregrated electronic driver with luminous efficacy not less than 120 lumen/watt connector block etc, complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor with flexible conduit of suitable sizecomplete all as specified and as directed. 131 Supply and fix Decorative Wall Mounting with Matt Gold finish with Borosil Glass Type suitable for 7.5 W A60 LED Lamp with E27 base with 1 N x 7.5 W A60 LED Filament Lamp or 1 N x 60 W GLS for Indoor Application complete all as specified and directed. 132 Supply & fixfittings with surface mount /recessed mount LEDdown lighters 12 W (Round/Square), cool white/warm whiteincluding driver, CRI ≥ 80, PF ≥ 0.95, lumen output≥ 1130 Lm, Colour temp 3000/5700K, luminous efficiency > 97 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed. 133 Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt (Warm white/cool white), 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders, CRI ≥ 80, PF ≥ 0.95, lumen output≥ 3600 Lm, Colour temp 3000/4000K, luminous efficiency > 120 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed. 134 Supplying, fixing in replacement Bulk head , luminaire 10 watt LED, internally prewired with and including premium quality diffuser , CRI ≥ 80, PF ≥ 0.95, lumen output≥ 800 Lm, Colour temp 6500K, luminous efficiency > 80 Lm/watt, electrical insulation class 1, operating voltage 140-270,THD <20%,Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed. 135 Supply & fixing LED security lightwith aluminium pressure diecast housing, IP 65 protection, luminaire lumens > 3000 lm, power consumption < 25w and luminous efficiency > 100 lm /W, electrical insulation class 1, CRI > 80, temp range 0 to 50º C and in built electronic driver prewire upto terminal block with driver efficiency > 85%, power factor > 0.95,colour temp 6500 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 criteria, multi stage constant current operated driver with operating voltage range 150-270V AC, fixed to pole or wall of building incuding connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 sqmm including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. 136 Supply and fixing wall mounted fan 400mm sweep, Energy saving, 230 Volts, 50 Hz, power consumption is less than 120 watt, 5 star rated noiseless motor operation, 2100 RPM, Air delivery 95 cum/min complete,double ball bearing, copper wound, including electrically connecting from ceiling rose/6 Amp Socket outlet to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit, complete all as specified and directed. 137 Supply and fixing ceiling fan, 1400mm sweep (with remote), minimum BLDC (Brush Less Direct Current Energy saving ceiling fan, 230 Volts, 50 Hz power consumption is less than 35 watt, 5 star rated noiseless motor operation, inverter stabilization technology, 300 RPM, Air delivery 245 cum/min complete with standard accessories i.e (three blade, 02 Nos canopy, down rod of length 1.5 mtr to 2.0 mtr long, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts,bolts, washers, split locking pins etc), double ball bearing, copper wound, including electrically connecting from ceiling rose to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit complete all as specified and directed. 138 Supply and fixingExhaust Fan high quality engineering plastic of size250 mm sweep, power consumption 35 watt ,1200 RPM, Air delivery 860 cum/min, 230 V-240V, 50 HZ, noise level not more than 50 dB with approved colour and with louver shutter complete including aluminium wire net frame on the exhaust side (outer surface of wall)including electrically connecting from ceiling rose to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit complete all as specified and directed. 139 Supply and fixing electric water heater of capacity 25 ltr, storage type, Feroglas coating inner container, Made of ultra thick super cold rolled steel plates, 0.8 MPa high working pressure, Incoloy glass coated heating elements,heating element heavy duty mag-nesium anode rod, adjustable knob for temperature setting, 230 V, 50 Hz, BEE 5 Star, Energy saving high density PUF insulation, complete with all accessories such as safety valve, thermostat,NRV, 02 Nos connection pipes (Hot & Cold) etc complete all as specified and directed. 140 M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the following sizes :- 1x1.5 Sqmm, complete all as specified and directed. 141 M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the following sizes :- 2x4 Sqmm with earth wire of 1x4 Sqmm including dismanling and taking down old submain wiring, complete all as specified and directed. 142 M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the following sizes :- 2x10 Sqmm with earth wire of 1x10 Sqmm including dismanling and taking down old submain wiring, complete all as specified and directed. 143 M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the following sizes :- 4x10 Sqmm with earth wire of 2x10 Sqmm including dismanling and taking down old submain wiring, complete all as specified and directed. 144 Disconnecting and taking down old unserviceabledistribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces to the existing surfaces complete all as specified and directed. 145 Supply & fix in repair sheet metal enclosure Vertical TPN DB 4 way as per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 & IP 54 DBs, With and including DPX³ 160 MCCB as incomer and SP/TP MCBs as outgoing, Complete all as specified and directed. 146 S&F for sheet metal enclosure MCBDBHTPN4 way Horizontal type with suitable rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 147 Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 100 amp rat-ed bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCBand with enclo-sure blank plates for unused way suitable for 12 way ISI marked completed all as specified and directed. 148 Supply and fixing MCB TPN 40-63 Amp rating 415V, 10KA C curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 149 Supply and fixing MCB SP 6-32 Amp rating 240V, 10KA C curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 150 Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA C curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 151 Supply and fix three phase Energy Meter (DIN Rail mountable) 100 Amp, 2 moduleLCD display230 V, accuracy class-I 50Hz,with parameters to show data, time, current reading, load, PF, voltage and KWH, complete all as specified and directed. 152 Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burrieddirectly in groundverticallyto a depth not less than 2.5 metrebelowgroundlevelwith topedgeof theearth plate at a depth not less than 1.5 mtr belowgroundlevelearth platesurrounded from all sides by 15cmthickpacked layer ofcharcoal dust and common saltfillinginalternate layers andelectrodeconnectionby usingGI wire 4mm by meansof bolts, nuts, check nutsand washersmade of galvanised ironand thimbles and other endof theearth wire connectedto mainswitch boardprotected by galvanised iron medium grade pipe 40mm borein wall/floor/andGI Pipe 20 mm borelight grade forwatering with funnel and wiremesh PCC chamber in cementconcrete 1:3:6 typeC-2 and RCC pitcover includingnecessaryexcavation andearth work in anytype ofsoil, returningslurry approved soil and disposed of surplussoilto adistancenotexceeding 50 Mtraway all as shown inelectrical plateNo 3ofSSR 2009 ( Part-I).Notes (a)The unit rate shall include for GI protection pipe, GI watering pipe, wire mesh, funnel and excavation, RCC pit cover, test point, galvanised iron strip from top of earth plate upto 7.5 metres above ground level and if GI protection pipe is less than 7.5 metres, no price adjustment shall be made.(b) PCCpit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc shall be deemed to be included in the unit rate.
Contract Date: Dec 24, 2025 Contract Value : ₹ 44.85 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Maharashtra View Result →
14.
Defence #8391205 AOC
Tender For Periodical Services With Smart Periodical Methodology To Internal And External Surface Of Md And Otm Accn At Af Stn Nal; 1. Concrete (a) Internal water proofing compounds (IS : 2645) (b) Plywood for concrete shuttering work (IS-4990) 2. Joinery Wooden Flush Door Shutters, solid core type (IS-2202) 3. Builders Hardware (a) Steel shutter hinges (IS:1341) (b) Non-ferrous Butt Hinges (IS : 205) I Ferrous Tower Bolts (IS:204) (d) Non-ferrous Tower Bolts (IS: 204 ) (e) Door Handles (non-ferrous) (IS:208) (f) Parliament Hinges(Ferrous) (IS:362) (g) Hydraulically Operated Door Closures (IS:3564) h) Continuous Piano Hinges(IS:3818) (j) Non-ferrous Metal sliding door Bolts (IS:2681) (k) Tee and Strap Hinges (IS:206) (l) Mild steel sliding door Bolts (IS:281) 4. Steel And Iron Work (a) Steel doors, windows and ventilators (IS: 1038) 5. Roof Covering Bitumen Felts for water proofing and damp proofing (IS:1322) 6. Ceiling and Lining (a) Plywood for General Purposes (IS: 303) (Second revision) (b) Block boards (IS: 1659) IVeneered decorative plywood (IS: 1328) (Second revision ) (d) Marine plywood (IS : 710) (e) Fiber Hard board (IS : 1658) 7 Flooring (a) White Portland cement (IS : 8042) (b) Cement concrete flooring (IS : 1237) 8 WATER SUPPLY, PLUMBING, DRAINS AND SANITARY APPLIANCES (a) Concrete pipes with or without reinforcement (IS: 458) (b) Salt glazed stoneware pipes and fittings (IS: 651) I Flushing cisterns for water closets and urinals other than plastic (IS: 774) (d) Cast copper alloys screw down bib taps and stop valves (IS: 781) (e) Galvanised mild steel tubes (IS: 1239) (f) Galvanised mild steel tube fittings (IS: 1239) (g) Sand cast irons spigot and socket soil waste and ventilating pipes and fittings (IS: 1729) (h) Ball valves (Horizontal plunger type ) including floats for water supply purposes (IS: 1703) (j) Cast iron manhole covers and frames (IS: 1726) (k) AC presser pipes (IS: 1592) (l) Automatic flushing cisterns (IS: 2326) 8 (m) Vitreous china sanitary appliances (i) Wash down water closets (IS: 2556 Part II) (ii) Squatting pans (IS: 2556 Part III) (iii) Wash basins (IS: 2556 Part IV) (iv) Laboratory Sinks (IS: 2556 Part V) (v) Urinals Bowl type (IS: 2556 Part VI Section I) (vi) Half Round Channels (IS: 2556 Part VII) (vii) Symphonic wash down water closets (IS: 2556 Part VIII) (viii) Foot rests (IS: 2556 Part X) (n) Plastic WC seats and covers (IS: 2546) (o) Vertically cast iron pressure pipes for water and sewage (IS: 1531) (p) Pillar tap (IS: 1793) (q) Centrifugally cast (Spun) iron pressure pipes for water gas and sewage (IS: 1536) I Centrifugally cast (CI spigot and socket soil waste and vent pipes, fittings & accessories) (IS: 3989) (s) Rubber sealing rings for gas main water mains and sewers (IS: 5382) (t) Cast iron fittings for pressure pipes for water mains and sewers (IS: 1538) 9. Electrical Works (a)Ceiling Rose (IS:371) (b)Tumbler switches (IS:3854) ISocket outlet 3 pin plug and socket (IS:1293) (d)Switch fuses (main & switch) (IS:1064 Part-I&II) (e)Rigid steel conduit (IS:1063) (f)Rigid Non-Metallic conduit (IS:2509) (g)Single core cable polyethylene insulated and PVC sheathed cable (IS:1596) (h)Starter for tube light (IS:2215) (i)Fluorescent lamps (IS: 2418 Part I&II) (j)Aluminium stranded conductor (IS: 398 Part I & II) (k)Switchgears (IS:2208) (l)HRC cartridge fuse links upto 650 volts (IS:9224 Part II) (m)Porcelain Insulators for overhead power lines (IS:731) (n)MCB (IS:8828) 1 SOLAR WATER HEATING SYSTEM TATA BP SOLAR, SOLCHROME, RACOLD, INTERSOLAR, SSSPL 2 LED LIGHTS,PANELS & LUMINRIES INDOOR EVEREADY, POLYCAB, HAVELLS, HALONIX, BENLO, HPL, WIPRO, LUKER, ORIENT ELECTRIC, KCSAD, ASCENTECH, JAQUAR, GOLD MEDAL,SSK, PHILPS, CROMPTON, BAJAJ, OSRAM 3 LED LIGHT FITTING & LUMINARIES FOR ROAD AND STREET LIGHTING (OUT DOOR) EVEREADY, POLYCAB, HAVELLS, HALONIX, BENLO, HPL, WIPRO, LUKER, ORIENT ELECTRIC, KCSAD, ASCENTECH, JAQUAR, GOLD MEDAL, SSK, PHILPS, CROMPTON, BAJAJ, OSRAM 4 LED LAMPS POLYCAB, HALONIX, BENLO, WIPRO, ORIENT ELECTRIC, KCSAD, EVEREADY, ASCENTECH, JAQUAR, GOLD MEDAL, PHILPS, CROMPTON, BAJAJ, OSRAM 5 SMART STREET LIGHTS AND CONTROLL SYSTEM ORIENT ELECTRIC, KCSAD, EVEREADY, ASCENTECH 6 LED FLOOR LIGHT WIPRO, KCSAD, EVEREADY, ASCENTECH, JAQUAR, GOLD MEDAL 7 TUBE LIGHT/STREET LIGHT FITTINGS & ACCESSORIES POYCAB, HAVELLB, HALONIX HPL, JAQUAR, GOLD MEDAL 8 FLOOD LIGHT FITTINGS POLYCAB, HALONIX, KCSAD, EVEREADY, GOLD MEDAL 9 BOX TYPE DECORATIVE TUBE LIGHT FITTINGS POLYCAB, HAVELLS, HALONIX 10 POWER TRANSFORMER 132/66/33/22 KV JAY BEE INDUTRIES PANCHKULA, JAY BEE INDUSTRIES BTI, MUSKAAN, ITE GURGAON, TRANSCON, ABC TRANSFORMERS, BHARAT BIJLEE, SCHNEIDER CROMPTON GREAVES, ANDREW YULE, ALSTOM 11 POWER TRANSF ORMER (NON SEALED TYPE) UPTO 12.5 MVA OF 33KV JAY BEE INDUTRIES PANCHKULA, JAY BEE INDUSTRIES BTI, MUSKAAN, TRANSCON, ABC TRANSFORMERS, BHARAT BIJLEE, SCHNEIDER, CROMPTON GREAVES, ANDREW YULE, ALSTOM 12 OUTDOOR TYPE OIL IMMERSED DISTRIBUTION TRANSFORMERS 11KV UPTO AND INCLUDING 2500 KVA, 33V JAY BEE INDUTRIES PANCHKULA, JAY BEE INDUSTRIES BTI, IECO, MUSKAAN, TRANSCON, BHARAT BIJLEE, SCHNEIDER, CROMPTON GREAVES, ANDREW YULE, ALSTOM 13 DISTRIBUTION TRANSFORMERS 11KV ABOVE 500 KVA CAPACITY JAY BEE INDUSTRIES PANCHKULA, JAY BEE INDUSTRIES BTI, IECO, MUSKAAN, ITE GURGAON, TRANSCON, POWERWARE, ABC TRANSFORMENRS, BHARAT BIJLEE,SCHNEIDER, CROMPTON GREVEES, ANDREW YULE, ALSTOM 14 DISTRIBUTION TRANSFORMERS UPOT 500 KVA CAPACITY JAY BEE INDUSTRIES PANCHKULA, JAY BEE INDUSTRIES BTI, IECO, MUSKAAN, ITE GURGAON, TRANSCON, POWERWARE, ABC TRANSFORMENRS, BHARAT BIJLEE, SCHNEIDER, CROMPTON GREVEES, ANDREW YULE, ALSTOM. 15 DRY TYPE TRANSFORMERS UPTO 7.5 MVA /33 KV CLASS AND OIL TYPE TRANSFORMERS UPTO 20 MVA /06 KV CLASS JAY BEE INDUSTRIES PANCHKULA, JAY BEE INDUSTRIES BTI, MUSKAAN, TRANSCON 16 POWER TRANSFORMERS 66/33/11 KV COPPER WIRED JAY BEE INDUSTRIES PANCHKULA, JAY BEE INDUSTRIES BTI, MUSKAAN, TRANSCON, ABC TRANSFORMERS 17 LV SWITCHBOARD L&T, CROMPTON, HENSEL 18 LT PANELS/APFC PANELS/AC CONTROL PANELS/PUMP HOUSE PANELS FOR SS HAVING CAPACITY 1000 KVA AND ABOVE SUPERTECH POWER CONTROL PVT. LTD., IECO, BHANDARI, NEPTUNE, CORONET, SPC (SPC ELECTROTECH PVT. LTD), DVEPL, PSC, ITE GURGAON, INDO ASIAN, HAVELLS, MEGAWIN, SHALABH, HPL, HARTEK, ABB, L&T, SIEMENS 19 FAN (CEILING EXHAUST, TABLE, WALL & PEDESTRAL FANS) GOLD MEDAL, POLYCAB, HAVELLS, ANCHOR, LUKER, CROMPTON, BAJAJ, KHAITAN, USHA, ORIENT 20 STORAGE WATER HEATERS JAQUAR, GOLD MEDAL, AO SMITH, USHA, CROMPTON, RAMCO, BAJAJ 21 PT SWITCH / SOCKETS / CEILING ROSES / FAN RAGULATORS GOLD MEDAL, SSK, LEGRAND, CRABTREE, SCHNEIDER, PHILIPS, ANCHOR, BAJAJ, KINJAL 22 MODULAR SWITCH/SOCKETS/FAN RAGULATORS GOLD MEDAL , BENLO, INDO ASIAN, POLYCAB, HAVELLS, HPL, ANCHOR, LEGRAND, CRABTREE, SCHNEIDER, PHILIPS 23 HT 132/66/33 KV & 11 KV XLPE CABLES LS CABLE, GRANDLAY, V-MARC, GEMSCAB, RALLISON, POLYCAB, HAVELLS, JMW KABEL, CABLE CORPORATION OF INDIA, UNIVERSAL CABLE, ELEKTRON, PARAGON. 24 LT POWER & CONTROL CABLES, 1100 VOLTS, XLPE LS CABLE, PLAZA CABLES, V-MARC, GEMSCAB, SHALABH, JMW KABEL, RALLISON, POLYCAB, HAVELLS, GRANDLAY, HPL, CABLE CORPORATION OF INDIA, ELEKTRON, PARAGON 25 PVC WIRES & CABLES 650/1100 VOLTS LS CABLE, GOLD MEDAL, PLAZA CABLES, VMARC, GEMSCAB, SHALABH, HPL, POLYCAB, HAVELLS, BENLO, GRANDLAY, RALLISON, JMW KABEL, FINOLEX, ELEKTRON, PARAGON 26 HT/LT XLPE AERIAL BUNCHED CABLES GRANDLAY, PLAZA CABLES, V-MARC , LS CABLE, JMW KABEL 27 LT/HT CABLE JOINTS HEAT SHRINKABLE / PUSH ON TYPE MS-SEAL, M-SEAL, DENSON 28 CABLE JUNCTION BOXES,CIRCUIT BREAKER BOXES, DC RATED JUNCTION BOXES DVEPL, HPL, MEGAWIN, TRANSGUARD, PHOENIX CONTACT 29 LT AIR CIRCUIT BREAKER INDO ASIAN, HAVELLS, MEGAWIN, HPL, TRANSGUARD 30 COMPOSITE & RELAY CONTROL PANEL SUPERTECH POWER CONTROL PVT. LTD., CORONET, PRECISION SYSTEM CONTROL (PSC) 31 COMPOSITE POLYMERIC INSULATOR JAIPURIA, POWER-GRID, MG MATERIALS 32 CABLE TRAY, GRATING, ENCLOSURE & SAFETY LADDER SPC (SPC ELECTROTECH PVT. LTD), SUPERMAX 33 DG GENSETS (DIESEL/GAS BASED ENGINES) MAHINDRA, CUMMINS, JAKSONS 34 RIGID PVC CONDUIT PIPES & ACCESSORIES PLAZA CABLES, GOLD MEDAL, MODI’S, KALINGA, PLAZA 35 CONDUCTIVE CONCRETE EARTHING ELANCERETE, PRAGATI, SUPERMAX 36 ACSR CONDUCTOR ALIND, COYOTE, STERLITE POWER 37 MEDIUM VOLTAGE SFC GAS INSULATED RMU (RING MAIN UNIT) AND OIL INSULATED RMU OF 12KV , 24KV & 36KV MEGAWN, PASCAL, CGPISL, TRANSGUARD 38 HT SWITCH GEAR 33/66 KV SFS (OUT DOOR) MEGAWIN, TRANSGUARD, CGPISL, HARTEK, PASCAL 39 HT SWITCH GEAR 11KV, VCB (INDOOR/OUT DOOR0 HT RING MAIN UNIT, SF6/VACUUM,11 KV/CT & PT PASCAL, TRANSGURAD, CORONET, HARTEK, CGPISL, ITE GURGAON, MEGAWIN 40 PACKAGE / UNIFIED SUB STATION/CSS MUSKAAN, ITE GURGAON, MEGAWIN, CGPISL, CORONET 41 MCCBS INDO ASIAN, HAVELLS, BENLO, HPL, GOLD MEDAL, SSK, SHALABH 42 MCB/ELCB/RCCB/RCBO/ ISOLATORS/ MCB DISTRIBUTION BOARD/TPN SPN GOLD MEDAL, SSK, POLYCAB, INDO ASIAN, HAVELLS, BENLO, HPL, SHALABH 43 CHANGE OVER SWITCHES MEGAWIN, INDO ASIAN, HAVELLS, HPL, SHALABH 44 POWER CONTRACTOR INDO ASIAN, HAVELLS, HP 45 SMART/TAMPER PROOF ENERGY METERS (DIGITAL TYPE) ANCHOR BY PANASONIC, HPL, ELMEASURE, BENLO, L&T, SECURE 46 STATIC ENERGY METER BENLO, ELMEASURE, L&T, ABB, SECURE VOLTAGE STABILIXERS UPTO 25 KVA MUSKAAN, IECO, ITE GURGAON, VOLINA, SINETRAC, VINITEC. 47 VOLTAGE STABILIZERS ABOVE 25 KVA (SERVO CONTROLLED) MUSKAAN, IECO, ITE GURGAON, VOLINA, SINETRAC, VINITEC, POWERWARE 48 UPS (OFF LINE & ONLINE) SINETRAC, POWER ONE, SELVON 49 STREET LIGHT TIMERS SINETRAC, INDO ASIAN, HAVELLS 50 ISOLATION TRANSFORMER IECO, MUSKAAN, VOLINA, SINETRAC, VINITEC, ITE GURGAON 51 HT/LT STEEL TUBULAR SWAGED POLES SHIVAM METAL SHAPERS INDUCSTRIES, HPL, SOHAN LAL & SONS (POLES) 52 PCC POLE, FENCING POLE OF 8 FEET LONG & KERB STONE VENUS, SVRCC, SHRI RAM FLY ASH BRIKS, INDERBIR INDUSTRIES 53 HT PANEL PSC, HARTEK, PASCAL 54 BUS DUCTS/ RISING MAIN SPC (SPC ELECTROTECH PVT LTD) PHOENIX COTRACT SHALABH 55 SERVO CONTROLLED STABILIZER 1-500 KVA MUSKAAN, POWER ONE, JAIMA ELECTRICALS, POWER STAR, AIREN POWR 56 SOLAR CABLE BONTON, PLATIMA, VTL 57 OUTDOOR/ INDOOR TYPE OIL IMMERSED DISTR TRANSFORMER UPTO & INCL 500 KVA , 11 KV SYSTEM POWERWARE, GAGAN TRANSMISSIONS (P) LTD, POWER STAR, AIREN POWER 58 GI PIPES/ MS PIPES JINDAL, TATA, OSWAL 59 HDPE/UPVC/PPR PIPES FUSION, SFMC, FINOLEX, PRINCE, SUPREME 60 BRONZE SLUICE VALVES/NON RETURN VALVES/ AIR RELEASE VALVES/ PRESSURE REDUCING VALVE/ FIRE HYDRANT VALVE/ SPRING REFLIEF VALVE/ BALL VALVE/ STEAM VALVE/ SPRING RELIEF VALVE/ FLOAT VALVE SHAKTI, PRAYAG, KIRLOSKAR, ZOLOTO, LEADER, L&T (AUDCO) 61 FLOAT VALVE SHAKTI, PRAYAG, AIRAEURO, AGROTECH, TELEFLO, TECHNO INTERNATIONAL 62 GUN METAL GATE VALE/GLOBE VALVE/ HORIZONTAL & VERTICAL CHECK VALVE PRIMA, KIRLOSKAR, LEADER, L&T (AUDCO) 63 DI PIPES JINDAL, TATA, ELECTRO STEEL/LANCO, SRIKALAHASTHI, KESORAM 64 CI PIPES & FITTINGS JINDAL, TATA METALIKS, TATA KUBOTA 65 GI FITTINGS JINDAL, TATA, BST 66 PUMP SETS-MONO BLOCK KIRLOSKAR, CROMPTON, KSB, JOHNSON & JOHNSON 67 CENTRIFUGAL PUMPS KIRLOSKAR, KSB, GRANDFOS, ITT 68 SUMBERSIBLE PUMPS KRILOSKAR, BEACON, KSB, GRANDFOS, WASP, ITT 69 NON CLOG SEWAGE PUMPS KIRLOSKAR, KSB, CROMPTON, JOHNSON & JOHNSON 70 VERTICAL TURBINE PUMP KSB, KIRLOSKAR, BAJAJ, ATLANTA, JOHNSON & JOHNSON 71 DOSING PUMP/ BLEACHING DOZER ION EXCHANGE, MAIC INDIA, JESCO 72 MOTOR STRATERS HPL, L&T, BCH, SCHNEIDER, SIEMENS, ABB 73 ELECTRIC MOTOR BHARAT BIJLEE, KIRLOSKAR ELECTRIC, CROMPTON GREAVES, ABB, SIEMENS, GEC 74 SINGLE PHASE PREVENTRORS/ PHASE SEQUENCE CORRECTOR L&T, SIEMENS, LEGRAND, SCHNEIDER, ABB 1 PRESSED STEEL DOOR FRAMES / CHOWKHATS FOR DOORS / CUPBOARD AND WINDOW FRAMES PARSHOTAM STEEL INDUSTRIES (PSI), SHAKTI, MADHU INDUSTRIES, SHIVAM METAL SHAPERS INDOUSTRIES, ASHISH INDUSTRIES 2 STEEL WINDOWS / VENTS PARSHOTAM STEEL INDUSTRIES (PSI), SHAKTI, MADHU INDUTRIES, SHIVAM METAL SHAPERS INDUSTRIES, ASHISH INDUSTRIES 3 ROLLING SHUTTERS & ROLLING GRILLS PARSHOTAM STEEL INDUSTRIES (PSI), SWASTIC ROLLING SHUTTERS & MANUFACTURING WORKS, HERCULES ROLLING SHUTTERS BANGLORE, STANDARD INDUSTRIES PUNE 4 FACTORY MADE PANELLED DOOR FRAME / SHUTTERS JAIN DOOR PVT LTD, PARSHOTAM STEEL INDUSTRIES (PSI), A-1 TEAK PRODUCTS, EVEREST 5 PVC BOARDS/ DOOR FRAME / SHUTTERS ECOCELL / ECHON, H R ENTERPRISES, RAJSHRI PLASTIWOOD 6 PVC PANEL DOOR/WINDOWS ECOCELL / ECHON, H R ENTERPRISES, GIZA 7 UPVC WINDOWS/DOORS/ FRAMES & VENTILATORS ECOCELL / ECHON, YASHPOLY, APARNA VENESTER/ OKOTECH, MADHU INDUSTRIES, H R ENTERPRISES RAJSHRI PLASTIWOOD, FENESTA, ENCRAFT, SUPREME 8 ANODISED ALUMINIUM DOORS/ WINDOWS/FRAMES/PARTITIONS ASHISH INDUSTRIES, JINDAL, KALCO, ALPURE 9 GALVANISED STEEL SHEETS & COLOUR COATED GALVANIZED STEEL SHEETS KAMDHENU, TATA, JINDAL 10 TERRAZZO TILES/PPC TILES/ PPC CHQUERED TILES SURYAK, MOHINDRA, SWASTIK ALW, GPT, SVRCC 11 INTERLOCKING TILES/EXTERIOR TILES/PAVER BLOCKS SURYA K, POOJA CONCRETE, GPT, MOHINDRA, HARIOM TILES & PAVERS, KB SPUN, RANA TILES CO, SHINO TILES, RN TILES & PAVERS, SWASTIK ALW , SVRCC, KALOHA SPUN PIPE 12 ROOF TILES, KERB STONE MOHINDRA, HARIOM TILES & PAVERS, RN TILES & PAVERS, SWASTIK ALW, GPT, SVRCC 13 GLAZED CERAMIC/NON SKID WALLF/FLOOR TILES AGL, ORIENT BELL, SUNHEARRT CERAMIK, RAK CERAMICS, SOMANY, NITCO, JOHNSON, VITERO TILES 14 VITRIFIED TILES (NORMAL/ANTI SKID) AGL, ORIENT BELL, SUNHEARRT CERAMIK, VARMORA, RAK CERAMICS, SOMANY, NITCO 15 HDPE & LLDPE STORAGE WATER TANKS ASTRAL, SINTEX, SUPREME, 16 STAINLESS STEEL KITCHEN SINK WITH OR WITHOUT DRAINING BOARD, PLATE RACK JAINKO, SHAKTI, SPC, PRIMA, SILVERSHINE, PRAYAG, DIAMOND, NIRALI 17 BALL VALVES(HORIZONTAL PLUNGER TYPE) PRAYAG, PRIMA, JAINKO 18 BRASS VALVES PRAYAG, PRIMA, L & T VALVES, AMCO, VIP VALVES 19 SHOWER ROSES CHROMIUM PLATED (SWIVEL TYPE) PRIMA, PLAYER, AP ROYALE & BATHSENSE, JAINKO, SHAKTI, SILVERSHINE, JAQUAR, VITERO, SOMANY, PRAYAG 20 CP BATH ROOM FANCY FITTINGS & ACCESSORIES /CP BATH FITTINGS PRIMA, SHAKTI, PLAYER, SOMANY, SILVER SHINE, JAQUAR, ESSCO, PRAYAG, PLAYER, AP ROYALE & BATHSENSE, VITERO 21 BIB TAPS AND STOP VALVES (CP) FANCY FITTINGS ESSCO, JAQUAR, PRIMA, PLAYER, AP ROYALE & BATHSENSE, SILVERSHINE, JAINKO, SHAKTI 22 PTMT/PVC FITTINGS SHAKTI, SILVERSHINE, PRIMA, PRAYAG 23 READYMADE BATHROOM CABINETS PRAYAG, JAYNAM, JAGUAR, CERA, COMMANDER, PARRYWARE 24 HDPE PIPES/SNR PIPES(WATER/SEWAGE) ASTRAL, GEMSON INDIA, DUSTRON, REX POLYEXTRUSION LTD, SIRF, SKF. 25 SAND CAST IRPON SPIGOT & SOCKET (WATER/SEWAGE) RPMF, SKF, BENGAL IRON CORPORATION (BIC) 26 RCC HUME PIPES KB SPUN, SVRCC, KALOHA SPUN PIPE 27 CEMENT BASED PAINTS SNOWCEM, ASIAN, BERGER, DULUX 28 DECORATIVE PAINT (EXT & INT) JK MAXX PAINTS, SNOWCEM, DULUX 29 PLASTIC EMULSION PAINT JK MAXX PAINTS, BERGER(SILK, RANGOLI EASY CLEAN), ASIAN(ROYALE, APCOLITE ADVANCE), AKZO NOBLE(VELNET TOUCH), NEROLAC(IMPRESSION ECOCLEAN, IMPRESSION 24 CARAT), BRITISH(SPLENDOR LUXURY) 30 HIGH BUILT TEXTURE & WALL FINISHES (EXT &INT) JK MAXX PAINTS, ASIAN, BERGER, SNOWCEM, DULUX 31 SYNTHEYIC ENAMEL PAINT JK MAXX PAINTS, ASIAN PAINTS, GOODLASS NEROLAC PAINT LTD., JENSON & NICHOLSON, BERGER PAINTS, ICI DULUX, BRITISH(GLO HIGHGLOSS) 32 FRP DOOR FRAME &SHUTTER SPC, ROOFFIT, SELECTED PRODUCTS. 33 PVC WALL PANELING/PVC CEILING & PARTITION ECOCELL / ECHON, HR ENTERPRIES, RAJSHRI PLASTIWOOD, DECOINN, SUNBEAM 34 HDF/PVC DOOR FRAME SHUTTER MOULDED HR ENTERPRISES, ECHON, ALCAD, DECOINN 35 CI CENTRYFUGALLY PIPES & FITTINGS (IS-15905) CI HUBELESS PIPE (IS-3989) RPMF, SKF, BENGAL IRON CORPORATON (BIC) 36 UPVC CEILING & PANELLING YASHPOLY, HR ENTERPRISES, GIZA 37 PRE FAB PANEL BOARDS/WALL LINING CEILING TILES HI- STEEL, RAJSHRI PLASTIWOOD, LAFARGE, BORAL GYPSUM BOARD PVT LTD, SHRI NEPAL BOARD LTD, AEROLITE CEILING SYSTEM PVT LTD, HILUX, ARMSTRONG, V BOARD 38 FALSE CEILING TILES/BOARD (GYPSUM BOARD/POP/MINERAL FIBRE) JOINTING & FINISHING MATERIAL HI-STEEL, RAJSHRI PLASTIWOOD, GYPCORE, ARMSTRONG 39 FALSE CEILING / METAL FALSE CEILAING / METAL FRAMING HI- STEEL, RALSHRI PLASTIWOOD, ROYAL KRAFT, GYPCORE, ARMSTRONG 40 PARTICLE BOARD (VENEERED AND UNVENEERED LAMINATED) RELIANCE, THERMOPLAST, KITPLY, NOVA PAN INDUSTRIES, NEW DELHI, M/S GREEN PLY INDUSTRIES LTD, ARCHID BOARD, DURA BOARD, MYSORE CHIP BOARD LTD. 41 ROAD MARKING PAINT WATER BASED/THERMOPLASHTIC 3M, VERTEX, STP LTD, MARUTI BITUMEN PVT LTD 42 WPC DOOR FRAMES/PANELS/HYBRID SHEET/FLOORING/JALLI ECOCELL/ECHON, RAJSHRI PLASTIWOOD, HR ENTERPRISES 43 ROAD FURNITURE & REFLECTIVE SIGH BOARDS (ROAD STUDS, SOLAR STUDS, SPEED BREAKER, TRAFFIC CONE, SPRING POST, MEDIAN MARKER DELINEATOR, SAFETY CONES, SAFETY CONVEX MIRROR, Q-MANAGER, REFLECTIVE JACKETS, LIGHT BETON, BOLLARD ROAD BARRICADES CAUTION TAPE ETC. 3M, SHAKTI, SHEETAL 44 CPVC PIPES & FITTINGS FUSION, SENTINI FLOPIPES, PRAYAG, ASTRAL, SUPREEME, FINOLEX, DUTTON 45 PVCUPVCSWR PIPES & FITTINGS FUSION, SENTINI FLOPIPES, PRAYAG, ASTRAL, SUPREME,FINOLEX, DUTTON 46 SANITARYWARE SOMANY, RAK CERAMICS, PRAYAG, AP ROYALE & BATHSENSE, HINDWARE, KOHLER 47 PRE PAINTED GALVALUME STEEL SHEET/GALVALUME SHEETS KAMDHENU, TATA, JINDAL, DYNA ROOFING PVT LTD 48 CHAIN LINK FENCING/BARBED WARE/ PUNCHED TAPE CONCERTINA COIL/FENCING ARMSTRONG WIRES, MAINOM ROGER, A-1 FENCE 49 GLASS REINFORCED GYPSUM (GRG) CEILING TILES DIAMOND CEILING, HI-STEEL, GYPCORE, MARUTI GYPSUM, SHERA 50 ACP (ALUMINIUM COMPOSITE PANEL) ALUCOBOND,EUROBOND, ALUDECOR, ALEX PANEL 51 PVC FLUSHING CISTERN SHAKTI, RAK CERAMICS, PRIMA, SILVERSHINE, JAQUAR, PRAYAG, HINDWARE, PARRYWARE, SUPREME. 52 TOILET SEAT COVER RAK CERAMICS, SILVERSHINE, JAQUAR, PRAYAG, PRIMA, AP ROYALE & BATHSENSE, PARRYWARE, CERA 53 WOODEN PANEL DOORS, WINDOWS & FRAMES, FLUSH DOORS, WIREMESH DOORS JAIN DOORS, GL PLY, A-1 TEAK PRODUCTS 54 PCC MANHOLE & DRAIN COVER, EARTH PIT, CABLE ROUTE INDICATOR VENUS HARIOM TILES & PAVERS, MOHINDRA, SVRCC 55 PVC KITCHEN CABINETS & CUPBOARDS ECOCELL/ ECHON, RAJSHRI PLASTIWOOD, GIZA 56 PREPAINTED GLAVANISED COLOUR/ POWDER COATED STEEL WINDOWS, DOORS, PARTITIONS, VENTILATORS & STRUCTURAL GLAZING CHANDANI INDUSTRIES, ELIXIR, ROOFFIT 57 HDPE DWC PIPES ASTRAL, DUTRON, GEMINI PIPES 58 FLY ASH BRICKS SWASTIC ALWST, INDERBIR INDUSTRIES, SHRI RAM FLY ASH BRICKS 59 ELECTRIC CABLE COVERS INDERBIR INDUSTRIES, SHRI RAM FLY ASH BRICKS 60 PRECAST RCC COVER SWASTIC ALW, SVRCC, KALOHA SPUN PIPE 61 MIRROR LOOKING SAINT GOBAIN, MODI GLOAT, TRIVENI FLOAT GLASS 62 SOIL WASTE PIPE AND FITTINGS/STEEL MANHOLE COVER SKF, NECO, SILC, SINGHAL IRON FOUNDRY 63 INTEGRAL WATER PROOFING COMPOUND M/S HINDCON CHEMICALS LIMITED, M/S FOSROC CHEMICALS, M/S STP LIMITED, M/S IWL INDIA LIMITED, M/S CHOKSEY CHEMICALS/MATERIALS, M/S THERMAX LTD, M/S SIKA INDIA PVT LTD., M/S STANROSE ENVIROTECH INDIA PVT LTD, DANOSO(INDIA) PVT LTD. 64 DECORATIVE LAMINATES ARCHID LAM, SUNMICA, MERINO, LAM, MYSORE CHIP BOARD, GREELAM. 65 APP Modified membrane for water proofing and damp proofing M/s STP Limited ,M/s IWL India Limited,M/s Tikitar Danosa(India)Pvt Ltd,M/s Asian Paints Ltd,M/s Torchtar. 66 CEMENT PUTTY SNOWCEM PAINTS,MYK ARMENT,GOLDEN MOHAR,ASIAN PAINTS,ULTRA TECH CEMENT LTD “BIRLA WALL CARE PUTTY”,JK MAXX,NIPPON “SILKYWALL PUTTY”, REYNOBOND INDIA BRAND, REYNOCON WALL PUTTY. 67 ACRYLIC WASHABLE DISTEMPER AND PRIMER KANSAI NEROLAC(BEAUTY), BERGER PAINTS(JADOO),ASIAN PAINTS(TRACTOR UNO,JENSON &NECHOLSON, MYK ARMENT,NIPPON PAINT, JK MAXX. 68 INTERIOR EMULSION WALL FINISH ASIAN PAINTS,BERGER PAINTS,NEROLAC,SHALIMAR PAINTS,MYK ARMENT,NIPPON “MAXX BREEZE”,JK MAXX. 69 EXTERIOR EMULSION WALL FINISH ASIAN PAINTS(APEX ULTIMA), BERGER PAINTS (WHEATHER COAT ALL GUARD), DULUX(WEATHERSHIELD MAX), KANSAI NEROLAC(EXCEL TOP GUARD)SNOWCEM PAINTS,MYK ARMENT,NIPPON, JK MAXX.
Contract Date: Dec 08, 2025 Contract Value : ₹ 14.14 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Rajasthan View Result →
15.
Defence #8062689 AOC
Tender For Repair To Leakage/ Seepage, Plumbing And Misc Works In Zone I, Ii, And Vi Of Various Unit At Lekhapani Under Ge Dinjan No 2.; 1 ATT Chemicals ISI Marked with valid CML NO of BIS 2 Plasticiser M/S Fosroc chemicals India LTD./ MC-BAUCHEMIE (INDIA) PVT. LTD. / SIKA QUALCRETE LTD. 3 Water proofing compound M/S HINDCON CHEMICALS LTD./M/S CHOKSEYCHEMICALS PVT. LTD./ BERGER PAINTS INDIA LTD./ M/S IWL INDIA LTD. 4 Factory made 2 nd class hard wood paneled door shurrers/Skelton shutters/Flush door shutters (A) Modern doors (B) Joinery Manufacturing Co. (C) Goel Brothers (D)Hindustan Housing Factory (E) Surbhi Metal India Ltd (F) SA Plywood Industry (G) Laxmi Doors (H) Merino Flush Doors (I) Delhi Construction Eqpt (J) Ambika Timber Works, Bikna (Patel Nagar),P.O.: Keshiakole, Bankura, W.B. (K) Premier Wood Craft (P) Ltd,Jessore Road, P.O. Ganganagar, Dist – 24 Parganas (West Bengal) (L) MP Wood Products (M) Jain Doors Pvt Ltd, Plot no 4 Phase IV,KundliDist:- Sonepat, Haryana 131028 (N) Doorking Kolkata (O) M/s Jain Wood Industries (Brand: JAYNA) 5 PVC doors and frames, Windows, Partitions, False ceiling and wall claddings M/S RAJSHRI PLASTIWOOD/EVEREST INDUSTRIES LTD/M/S ACCUCEL POLYTECH PVT LTD/ M/S SINTEX INDIALTD. / DUROPLAST 6 FRP door KRAFTO DOOR/ M/S Fibrewaystechnology(254 A/1, Gr floor,TK House, Malviya Nagar Delhi-17) , M/S Syntax Ind. Ltd, M/S Deelux Poly Fab Pvt Ltd, M/S S M Fibre, M/S Ashoo Model Arts, M/s Jain Wood Industries (Brand: JAYNA) 7 UPVC door, window frames and Ventilators (A) M/S Accura Polytec (B) h Pvt Ltd (ACCUCEL) (B) M/S Profine India Window technology Pvt Ltd ( Brand : KOEMMERLING) (C) RajshriPlastiwood (D) NCLVeka Limited (UPVC Doors & Windows) (E) Madhu Industries (F) UnifixPlast Pvt Ltd (UPVC Windows) (G) M/s Yashashri Poly extrusion Ltd (H) Arpana Enterprises Ltd 8 Factory made steel windows,Ventilators (IS 1038-1980) M/S DOORWYN INDUSTRIES/M/S HOPES METAL INDUSTRIES LTD/M/S MADHU INDUSTRIES/M/S MODERN FABRICTORS/M/S MULTIWYN INDUSTRIAL CORP,/ M/S PURBANCHAL INDUSTRIES/M/S STEEL ENGINEERS/M/S THE ANKUR INDUSTRIES/M/S TRISUL INDUSTRIES/M/S G S UDYOG/M/S CHANDNI INDUSTRIES 9 Pre-coated Factory made steel windows and Ventilators (IS-1038- 1980) TATA Steel/JINDAL/Ashish Industries/Ashwani & Sons, 4-66, Rajnagar, Ghaziyabad (UP)/ NCL Alltek & Seccolor Ltd, 10 Pressed Steel Frames for Doors/ Windows/ Ventilators M/S Ashish Industries/M/S Trisul Industries/M/s Chandni Industries 11 Metal Rolling Shutters and Rolling Grills/ Collapsible Gates (A) Steel Engineers (B) AVA Steel Industries (C) Sen Harvic (D) AGEW Steel Manufacturers Pvt Ltd (E) Sehgal Doors (F) Hopes Metal Industries Ltd (G) NCL Altek & Seccolour Ltd (H) Bihar Bobbin & Engg Work (I) Ankur Industries (J) BA Enterprises (K) Multiwyn Industrial Corporation (L) Doorwyn Industries (M) Modern Fabricator 12 Aluminium sections for doors, windows Ventilators and Snap grid, etc HINDALCO/ INDALCO/ JINDAL / HALCO / M/S TRISULINDUSTRIES/ BENGAL ROLLING SHUTTERS &ENGINEERING WORKS/ CHANDNI INDUSTRIES 13 Mild steel builders hard ware Items such as tower bolts, handles, butt hinges, sliding door bolts, etc. CROWN/ EVERLITE/ GODREJ/ HARRISON/ MOWJEE/ SANDHU/ SARTAJ/ UNIVERSAL OR ANY MAKE BEARING IS CERTIFICATION MARK 14 Aluminum Builders hard ware Items such as tower bolts, handles, butt hinges, sliding door bolts, etc. ARGENT/ CLASSIC/ POINEER OR ANY MAKE BEARINGIS CERTIFICATION MARK 15 Floor Springs/ Door Closures/ Accessories (A) Ozone (B) Geze (C) Ebco (D) Insta (E) Closma (F) Nexia (G) Hardwin (H) Godrej (I) Doorset 16 Modular Furniture (A) Durian (B) PSL (C) Dumro (D) Furnico (E) Featherlite (F) Eurocoustic (G) Godrej Interio (H) Zuari (I) Methodex Sys Ltd (J) Wipro (K) Duroplast (L) Aristo 17 Moulded Panel Door (A) Standard Doors (B) Anand Wood Crafts (C) Jain (D) Goyal 18 Solid Panel Foam Doors (Solid/ Glazed Panel) (A) Encraft (B) Infinity (C) Rehau (D) Lingel (E) Fenesta (F) Kesar (G) LG Hausys 19 Natural Fibre Thermo Composite Door, window shutter and frame (A) Durosam (AB composite Ltd) (B) Elcons 20 Automatic Door Glass fittings (A) Geze (B) Ozone (C) Closma (D) Dorma India Pvt Ltd (E) Nexia (F) Toshi (G) Hardwin 21 Extruded Polished / Matt finish Brass Builders Hardware (A) Bharat (B) Harrison (C) Godrej 22 Gypsum boards (A) Lafarge (B) Gypsum India Ltd (C) USG (D) Gyproc (E) Boral Gypsum (F) Armstrong (G) Lazyp 23 PVC False Ceiling (A) Sintex (B) Duroplast (C) Polyline Pvt Ltd (D) H2O Solution (E) Kumar Arch Tech Pvt Ltd (F) Rajshri Plastiwood (G) Accura (H) Saint Gobain (I) Modiguard 24 Calcium Silicate Board/ Calsidicor Tiles in False Ceiling/ wall lining (A) Kingston (B) Ramco Industries Ltd (C) Anchorlam (D) Duratuff (E) Armstrong (F) India Gypsum (G) Lafarge (H) Gypstone (I) Saint Gobain (J) Everest 25 Mineral Fiber False Ceiling (A) Insula (B) USG (C) Kingston (D) Aerostone (E) Armstrong (F) Twiga Insulation (G) UP Twiga Fiber Glass Ltd (H) Llyod Insulation 26 Metal False Ceiling (A) Armstrong (B) unifloors (C) nittobo 27 Cement Fiber Board Ceiling (A) NCLS Bison (B) Kingston (C) Rhino (D) Anchorlam (E) Duratuff (F) Everest (G) Lafarge (H) Armstrong 28 Anodised Aluminium Partition System with Solid/ Glazed Panels (A) Mahaveer (B) Charminar (C) Jindal (D) Hindalco (E) Indalco 29 Frameless glass partition system/ wall panelling (A) Saint Gobain Glass (B) Kesar Brand of Kesar Safety Glass (C) IAG 30 PVC Partitions and Wall Panelling (A) Duroplast Extrusion Pvt Ltd (B) Sintex (C) Polyline Pvt Ltd (D) Kumar Arch Tech (E) Rajshri Plastiwood 31 PVC Kitchen (Cupboards, Cabinets & Wardrobes) (A) Accura (B) H2O Solution (C) Duroplast (D) Accucel Polytech Pvt Ltd (E) Polyline Extrusion (P) Ltd (F) Masonite (G) Kumar Arch Tech Pvt Ltd (H) Rajshri Plastiwood (I) Sintex (J) Commander 32 Rigid Foam PVC Sheet from 0.50 mm thickness to 40 mm thickness (A) Hindopan (B) H2O Solution (C) Kumar Arch Tech (D) Rajshri Plastiwood (E) sintex (F) Marino .... more in document
Contract Date: Oct 06, 2025 Contract Value : ₹ 13.17 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Assam View Result →
16.
Defence #7863948 AOC
Internal And External Periodical Services Alongwith B/R Repair Works At Dundahera Mil Stn, Manesar Camp Indubinola Under Age B/R-Ii Of Ge (South) Delhi Cantt-10.; 1 17 Old u/s wire mesh Sqm 200.00 12.00 2400.00 2 19 Old u/s wall/ceiling board Sqm 250.00 25.00 6250.00 3 21 Old u/s Roller blind Sqm 180.00 25.00 4500.00 (a) One bag capacity concrete mixer 01 No (b) Vibrator (Needle and Plate Type) 01 No Each (c) Steel shuttering with spans, props etc 100 Sqm (d) Trucks/Tippers 02 No (e) DG Sets 5/10 KVA 01 No (g) Total Stations 01 No (h) Concrete cube testing machine (Hydraulically operated) 01 No (k) Concrete Pumps 02 No (l) Concrete mobile weigh batchers 01 No (m) Drilling Machines 02 No (n) Meggar 01 No (o) Bar Bending table electrically operated 01 No 1 PRESSED STEEL DOOR FRAMES / CHOWKHATS FOR DOORS / CUPBOARD AND WINDOW FRAMES PARSHOTAM STEEL INDUSTRIES(PSI), SHAKTI, MADHU INDUSTRIES, ASHISH INDUSTRIES 2 STEEL WINDOWS/VENTS / DOOR FRMES/ROLLED FRAMES GI SECTION WINDOWS (PRE PAINTED / COLOUR COATED) TATA PRAVESH, PARSHOTAM STEEL INDUSTRIES(PSI), SHAKTI, MADHU INDUSTRIES, ASHISH INDUSTRIES 3 ROLLING SHUTTERS & ROLLING GRILLS PARSHOTAM STEEL INDUSTRIES(PSI), ASHISH INDUSTRIES,MADHU INDUSTRIES 4 WELDED WIRE MESH / FABRIC MULTIWELD WIRE CO LTD, MUMBAI, JAINSONS SALES CORP, DELHI, JAISONS INDUSTRIES 5 FACTORY MADE PANELLED DOOR SHUTTERS CENTURY PLYBOARD (INDIA) PVT LTD, GREENPLY, JAIN DOORS PVT LTD, EVEREST, A-1 TEAK PRODUCTS 6 FACTORY MADE FLUSH DOOR SHUTTERS CENTURY PLYBOARD (INDIA) PVT LTD, GREENPLY, JAIN DOORS PVT LTD, EVEREST, A-1 TEAK PRODUCTS 7 PVC DOOR FRAME, CHOWKAT, PANEL, DOOR/WINDOW SINTEX, RAJSHRIPLASTIWOOD LTD,M/S FENESTA, ECOCELL, POLYLINE, 8 UPVC WINDOWS/DOORS FENESTA,SUPREME, ENCRAFT, RAJSHREE PLASTIWOOD, ECOCELL 9 STANDARD MORTICE LOCK GODREJ, HARRISON, LINK 10 HYDRAULIC DOOR CLOSER EVEREST, UNIVERSAL, GODREJ 11 ANODISED ALUMINIUM DOORS/WINDOWS/FRAMES/PARTITIONS FENESTA, JINDAL, INDAL, HINDALCO, KALCO, ALPURE, AXSYS. 12 ALUMINIUM WOODEN DOOR AND WINDOW FITTINGS ARGENT INDUSTRIES, CROWN , ALUMINIUM UDYOG NEW DELHI (BRAND-GLOBAL), 13 ALUMINIUM SECTION HINDALCO, JINDAL, NALCO, FENESTA 14 ALUMINIUM SHEETS HINDALCO, JINDAL, NALCO, FENESTA 15 ALUMINIUM COMPOSITE PANELS ALCOBOND, ALSTRONG, ALSTONE 16 PARTICLE BOARD (VENEERED & UNVENEERED LAMINATED) KITPLY, GREEN PLY INDUSTRIES LTD, CENTURY PLY, ROYAL TOUCHE LAMINATES, GREEN PANEL 17 PLYWOOD FOR GENERAL PURPOSES KITPLY, GREEN PLY INDUSTRIES LTD, CENTURY PLY 18 DECORATIVE LAMINATES KITPLY, GREEN PLY INDUSTRIES LTD, CENTURY PLY, ROYAL TOUCHE LAMINATES, GREEN PANEL, GREELAM 19 FIBRE BOARD (MEDIUM DENSITY) / PLAIN & PRE LAMINATED MDF & HDF BOARDS KITPLY, GREEN PLY INDUSTRIES LTD, CENTURY PLY 20 PRE FAB PANEL BOARDS/WALL LINING /CEILING TILES LAFARGE, BORAL GYPSUM BOARD PVT LTD, EVEREST, ARMSTRONG, GYPROC 21 GALVANISED STEEL SHEETS & COLOUR COATED GALVANISED STEEL SHEETS SAIL, TATA, JINDAL, JSW, , DURAROOF 22 POLYCARBONATE SHEETS DURATUFF, LEXAN, VMT PLASTE LTD M/S COXWELL DOMES ENGG PVT LTD, FIBREWAYS. 23 GALVALUME SHEETS SAIL, TATA, BLUESCOPE JINDAL, JSW, DURAROOF 24 AC SHEETS/AC BOARDS (CORRUGATED, SEMI CORRUGATED) CHARMINAR, RAMCO, EVEREST 25 GYPSUM BOARD SAINT GOBAIN (GYPROC), USG BORAL, ARMSTRONG, LAFARGE, EVEREST 26 PVC TILES/SHEETS PRIMER POLYFILM LTD, WONDER FLOOR, ARMSTRONG 27 GLASS MOSAIC TILES JOHNSON, ITALIA, CORAL MOSAIC, NITCO 28 TERRAZZO TILES/PPC TILES/PPC CHEQUERED TILES NITCO, EUROCON, SURYA KIRAN. JAIN TILES INDUSTRIES HALDWANI (JTI) 29 INTERLOCKING TILES/EXTERIOR TILES/PAVER BLOCKS ISI marked and confirming to relavent IS 30 DECORATIVE TEXTURE/COATING UNITILE, BAKELITE HYLAM (HERITAGE), NCL ALTEKSECCOLOR, DULUX (ACRATEX), APEX (DURACAST), BRITISH (XTRACEM 76), LUXTURE, BSC RUSTIC SUPERFINE, ACRO PAINTS. 31 EXPOSED BRICK FAÇADE UNISTONE, PIONEER BRICKS, REGENT TILES 32 GLAZED EARTHEN WARE TILES AGL, SOMANY, NITCO 33 GLAZED CERAMIC/NON SKID WALL/FLOOR TILES KAJARIA, , CERA, SOMANI, NITCO, SIMPOLO, VARMORA, ORIENT (BELL), AGL, 34 VITIRFIED TILES (NORMAL/ANTI SKID) KAJARIA, , CERA, SOMANI, NITCO, SIMPOLO, VARMORA, ORIENT (BELL), AGL, 35 HDPE & LLDPE STORAGE WATER TANKS SINTEX, POLYCON, VECTUS, SUPREME. 36 SANITARY APPLIANCES/ FITTINGS(CHINAWARE) HINDWARE, PARRYWARE, CERA, JAGUAR, KEROVIT. 37 WATER CLOSET SEATS AND COVER (SOLID BAKELITE) THERMOSTAT MOULDED TOILET SEAT COVER PARRYWARE, JAGUAR, CERA, HINDWARE 38 HEALTH FAUCET HINDWARE, JAGUAR, CERA, PARRYWARE 39 PVC FLUSHING CISTERNS HINDWARE, PARRYWARE, CERA, JAGUAR 40 STAINLESS STEEL KITCHEN SINK WITH OR WITHOUT DRAINING BOARD, PLATE RACK HINDWARE, PARYAG, CERA, SILVERSHINE, 41 STAINLESS STEEL PLATE RACK SPC, PRAYAG, SILVERSHINE, SHAKTI, JAINCO, NIRALI, 42 BALL VALVES (HORIZONTAL PLUNGER TYPE) PRAYAG, PRIMA, JAINKO, ZOLOTO 43 SHOWER ROSES CHROMIUM PLATED (SWIVEL TYPE) JAGUAR, SOMANY, PRAYAG, HINDWARE, PARRYWARE, CERA 44 BATH ROOM FANCY FITTINGS / CP FITTINGS BRASS, FAUCETS & FIXTURES JAGUAR, CERA, KOHLER, AP ROYALE& BATHSENSE, ESSCO, 45 BIP TAPS AND STOP TAPS (CP) FANCY FITTINGS JAGUAR, CERA, KOHLER, AP ROYALE& BATHSENSE, ESSCO 46 SALT GLAZED STONE WARE PIPES/GLAZED STONE WARE PIPES SFMC, SUPERME, ASTRAL, VECTUS 47 CONCRETE HUME PIPES INDIAN HUME PIPE COMPANY, KB SPUN, SVRCC 48 PVC RAIN WATER PIPE/SEWAGE PIPE SUPREME, FINOLEX, ASTRAL, PRAYAG 49 GI PIPE/FITTINGS JINDAL, TATA, SWASTIK, APL APPLO 50 CI PIPE/FITTINGS (FOR SEWAGE/RAINWATER) SKF, (SINGHAL IRON FOUNDRY), JINDAL SAW, NECO (JAYASWAL), ELCTROSTEEL, HEPCO 51 SOIL WASTE PIPE FITTINGS/STEEL MANHOLE COVER SKF, (SINGHAL IRON FOUNDRY), JINDAL SAW, NECO (JAYASWAL), ELCTROSTEEL, HEPCO 52 PPR PIPES/SWR/CPVC/COMPOSITE PIPES AND FITTINGS SFMC, VECTUS, ASHIRWAD, SUPREME, FINOLEX, PRINCE 53 HDPE PIPES/SNR PIPES/ DWC (HDPE) PIPE (WATER/SEWAGE) ASTRAL, FINOLEX, SFMC, SUPREME 54 SAND CAST IRON SPIGOT & SOCKET SOIL WASTE, VENT PIPES & FITTINGS SKF, (SINGHAL IRON FOUNDRY), JINDAL SAW, NECO (JAYASWAL), ELCTROSTEEL, HEPCO 55 CEMENT BASED PAINTS SNOWCEM, ASIAN, BERGER, ACRO PAINTS 56 DRY DISTEMPER/OIL BOUND DISTEMPER/PLASTIC EMULSION/EXTERIOR EMULSION/SILICON PAINTS & COATING NEROLAC PAINTS, BERGER PAINTS, ASIAN PAINTS, BIRLA OPUS PAINTS 57 PLASTIC EMULSION PAINT NEROLAC PAINTS, BERGER PAINTS, ASIAN PAINTS, BIRLA OPUS PAINTS 58 PAINT EXTERIOR BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL), BIRLA OPUS PAINTS 59 SYNTHETIC ENAMEL PAINT NEROLAC PAINTS, BERGER PAINTS, ASIAN PAINTS, BIRLA OPUS PAINTS 60 FALSE CEILING TILES/BOARD (GYPSUM BOARD/POP/MINERAL FIBRE) GYPROC, ARMSTRONG, EVEREST, LAFARGE, USG BORAL, 61 MIRROR LOOKING SAINT GOBAIN, MODI FLOAT, TRIVENI FLOAT GLASS, HINDWARE, PRAYAG, CERA 62 PTMT FITTING PRAYAG, PRIMA VECTUS, SHAKTI, POLYTUF, JAINKO 63 FRP DOOR / FRAME SHUTTER, CHAJJAS FIBREWAYS, ROOFFIT, SPC 64 WPC DOOR, WINDOWS & FRAME, JALI, SHEET RAJSHRI PLASTIWOOD, ALSTONE, ECOCELL/ECHON, GIZA 65 PVC WALL PANELING HR ENTERPRISES, ECOCELL, POLYLINE, DECOINN, SUNBEAM, RAJSHREE PLASTIWOOD 66 HDF/PVC DOOR FRAME SHUTTER HR ENTERPRISES, POLYLINE, ECOCELL/ ECHON, 67 MS PIPES APL, APPOLO, BHUSHAN 68 PVC MOULDED DOORS ECO CELL/ECHON, RAJSHREE, POLYLINE 69 BRASS VALVE PRAYAG, ZOLOTO, L&T VALVES, AMCO, VIP VALVES 70 ROOF TILES, /KERB STONE/ PCC BLOCK MOHINDRA INDUSTRIES, HARIOM TILES & PAVERS, NITCO, JOHNSON, SURYA KIRAN, SOMANY. JAIN TILES INDUSTRIES HALDWANI (JTI) 71 FLY ASH CEMENT BRICKS KB SPUN, SVRCC 72 UPVC/PVC FALSE CEILING & PANELLING RAJSHRI PLASTIWOOD, POLYLINE, ACCURA, ECOCELL 73 CHAIN LINK FENCING/ BARBED WIRE, PUCHED TAPE CONCERTINA COIL/ RAZOR BLADE TAPE FENCING A-1 FENCE, ARMSTRONG WIRES, MAIMOM ROGER, 74 APP MEMBRANE IWL, STP, ASIAN, TORCHTAR 75 READY MIX MORTAR BIRLA, ACC, ULTRATECH, JK CEMENT
Contract Date: Aug 23, 2025 Contract Value : ₹ 34.80 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Delhi View Result →
17.
Defence #7294235 AOC
Welcome Maintenance And Certain Misc B/R Items At Domestic Area At Af Stn Ambala Under Ge (Af) Ambala; 1 M&L for brooming down surfaces of any description and applying one coat of white wash onold decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed. 2 M&L for brooming down surfaces of any description and applying one coat of white wash onold decorated surfaces of Ceilingincluding preparation of old surfaces & filling cracks and holes etc complete all as specified and directed. 3 M&L for brooming down surfaces of any description and applying Twocoat of white wash onold decorated surfaces of Ceilingincluding preparation of old surfaces & filling cracks and holes etc complete all as specified and directed. 4 M & L for brooming down surfaces of any description and applying one coat of cement base paint on old wall surfaces, including preparation of old surfaces & filling cracks and holes etc and applying onecoats of cement base paint completeall as specifiedand as directed. 5 M & L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surfaceincluding preparation of old surfaces & filling cracks and holes etc, complete all as specified and directed. 6 M&L for Preparing the surfaces of old wall surfaces and applying one coat of distemper oil emulsioncomplete all as specified and directed 7 M&L forPreparing the surfaces of old wall surfaces and applying Twocoat of distemper oil emulsioncomplete all as specified and directed 8 M&L for Complete removal of existing treatment and preparing the surfaces of walls plastered or unplastered and applying two coat of distemper oil emulsionover a coat of alkali resistent primer over putty any thickness.complete all as specified and directed Note : Quoted rate shall deemed to include for cost of wall care putty. 9 M&L for preparation of old / new masonry / concrete walls / ceiling treated / untreated surfaces and applying two coats of plastic emulsion paint (of approved tint) over a coat of 1mm thick wall care putty including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed 10 M&L for Preparation of old wooden surfaces and applying a coat of synthetic enamel paint over 10 cm width or girthcomplete all as specified and as directed. 11 M & L for painting of old steel surfaces of any description not otherwise described over 10 cm width or girth with onecoats of synthetic enamel paint including preparation of surfaces etc complete all as specified and as directed. 12 M&L for Preparation of oldplastered sufaces of walls and applying one coats of weather-proof antifungal exterior emulsion paint,upto triple storey building, complete all as specified and directed. Note: This item shall be executed upto a height of 15.00mtrs. cost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate. 13 M & L for complete removal of old/existing treatment including preparation of wall/Ceiling sufaces of any description and applying two coats of exterior grade weather proof paint water basedover a coat of primer overany thicknessbirla care putty,on wall surfaces complete all as specified and directed. Note : (i) This item shall be executed upto a height of 12.00mtrs. cost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate. (ii) First the complete removal of existing treatment shall be done and got approved from Engr-in-charge. (iii) Final coat shall be done after getting approval of completion of priming coat from Engr-in-Charge 14 M&L for Obliterating old writing of any description, not exceeding 0.1 sqm, with paint to match existing work, complete all as specified and directed 15 M&L for Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm height, complete all as specified and directed. 16 Demolition of Brickwork or stone boulder masonry/PCC block masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework & precast concrete articles and disposing off rubbish outside MD land complete all as specified and directed. 17 M&L for brick work with sub class Bbricks, straight or curved on plan exceeding 6 m meanradius , built in cement mortor 1:6 complete all as specified and directed. 18 M&L for brick work with sub classB bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. 19 Taking down cement plastering of any thickness on brick, concrete or stone walls, partitions, ceilings etc including raking out joints, hacking for key, scrubbing down with water etc, and rmoving debris out side MD land complete all as specified and as directed. 20 M&L for 15 mm thick rendering on brick wall or concrete wallorany surface in cement mortar 1:6 on fair face/other than fair face and finishing the surface with even and smooth without using extra cement all as specified and as directed. 21 M&L for Rendering 15mm thick on fair face/other than fair face of brick work or concrete any surface in CM 1:4 finished even and smooth without using extra cement upto triple storey building, mixing with approved water proofing compound, for roof facia, chajjas, etc.and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. NOTE:-(i) Note: This item shall be executed upto a height of 12.00mtrs. cost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate. (ii) Supply only WPC will be measured and paid separately under relevant item of BOQ. 22 M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement complete all as specified and as directed. 23 M & L for rough cast plaster incl 15 mm thick CM 1:3 on brick work or concrete surface complete all as specified in SSR Part -1 clause 14.22 complete all as specified . Note:Rough cast plaster finish shall be as follow :- After applying the under coat cement mortar 1:3 and while it is still inplastic state the rough cast mixture consisting of crushed stone or fine gravel aggreagte ( Which is generally of size between 6 to 12 mm depanding on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even . The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure the larger aggregate are throughly covered. Note : i) Area to be plastered may require to be carried out up to height of 15 m, cost of necessary scaffolding and safety provision of labours required shall be deemed to be included in rate quoted against this item. 24 M&L for Preparation of new or previously untreated plastered wall surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty. 25 M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed 26 M&L for Preparation of newly plastered sufaces of walls and applying two coats of weather-proof antifungal exterior emulsion paint over a coat of alkali resistant primer,over wall carePuttyupto triple storey building, complete all as specified and directed. Noted: This item shall be executed upto a height of 15.00m. cost of necessary scaffolding and safety provision of labour shall be deemed to be included in the quoted rate. 27 M & L for applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation ofsurfaces, complete all as specified and directed. 28 M&L for carrying out water proofing treatment of sunken floor as under:- (i)The concrete/ wall surface shall be cleaned throughly of all laitance , loose particles, dust , grease etc. any friable unsound area shall be chipped, cleaned and there after pre-welted to a saturated surface dried conditions.(ii) In case of potholes , superficial cracks found , the same shall be repaired with polymer modified mortar 1:3 ( 1 cement and 3 coarse sand )using Dr fixit pidicrete URP 301/Sikka latex or equivalent in Asian paints/ Forsoc as admixture @ 10% of cement content and the same shall be applied on vertical area after removing of plaster upto 2 ft height (iii)On the prepared surface , apply a primer coat of Sika latex / Dr. fixit pidicrete URP 301 or equivalent in Asian paints/ Forsocmodified cement slurry 1:4:8 (1 admixture : 4 water : 8 cement) , after prewetting the substrate @ 2 kg/sqm .(iv)the surface thus prepared shall dampen upto saturation and apply two coats of sika top seal 107 or equivalent in Dr fixit piddilite/Asian paints/forsoc ,acrylic modified water proofing coating on the entire area @1.5 kg/sqm (each coat) Scond coat shall be applied after 6-8 hrs after the first coat and in the direction right angle to the previous coat . the water proofing should be taken to a vertical height of minimum 600 mm above .(v) Apply open woven glass fiber mesh of sika Fab 1 or equivalent in Dr fixit piddilite/Asian paints/forsoc, 150 mm wide strip over the PCC benching (Gola) whilst the first coat is wet and then apply scond coat . cure the hydrosentapplication ( Minimum 6-8 hrs drying) for a minimum 3 to 5 days .(vi)Apply a protection layer of 10 mm thick plaster made of 1:4 cement sand mortar admixed with integral water proofing compound Sika plastocrete plus/ Dr fixit piddilite LW plus or equivalent in asian paints/ forsoc @ 200 ml/bag of cement , applied over the water proofing coating .Note;The rate include the cost of demolition of exiting floor , sub base , PCC/ hardcore filled under floor , removal of debris , removal and replacement of damaged CI/PVC pipes, floor,Nahani traps complete all as specified and directed. Note:- Note:-(i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years.However contractor may deposit the FDR of same amount in favour of GE.If contractor fail to rectify the defect pointed out during this period in writting,the defect shall be got rectified at contractors risk and cost and the payment shall be made from the amount kept reserved or by encasing the FDR deposited by the contractor as guarntee.Contractors quoted rate for this item shall deemed to be inclusive of this aspect. . 29 M&L for Plain Cement Concrete (1:5:10) type E2, (using 40 mm graded mechanically curshed stone aggregate as in sunken slab filling, mass concrete etc., complete all as specified and as directed. 30 M&L for 75mm thick PCC (1:3:6) type C-2 (using 20mm gradedmechanically crushedstone aggregate) as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,10 mm wide. (ii)30 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume. 31 Taking down cement plaster and decayed concrete of any description, upto triple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar 1:3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-O (using 12.5mm graded mechanically crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3, complete all as specified anddirected. Note:(i) WPC shall be measured and paid separately. (ii) This item shall be executed upto height of 12.00 m cost of necessary scaffolding and security provision of labour shall be deemed to be included in the quoted rate. (iii)Cost of necessary formwork shall be deemed to be included in the quoted rate. 32 Uprooting scrubs/plant/flora & fauna on wall girth not exceeding 100mm from brick wall by cutting holes into masonry/walls for digging out roots and dosing Sulfuric/Phenolic Acid as per manufacturers instruction to burn deep rooted tree roots and making good the disturbed area with cement mortar in CM 1:3 using water proofing compound including necessary scaffolding upto a height of 12 metre complete all as specified and directed.” Note :- cost of WPC, scaffolding shall be deemed to be included rate. 33 Taking down chowkhat or frame without taking off shutterfrom the frame not exceeding 1.50 Sqm each from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed 34 Taking down chowkhat / frame without taking off shutter exceeding 1.50 Sqm not exceeding 4 Sqm each. from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed 35 Taking down Shutters of any description exceeding 1 sqm and not exceeding 2 sqm each, complete all as specified and as directed 36 Supply and fixing Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVCfasteners, screws, brackets as per SSR Part –II (2020) complete all as specified andas directed. 37 Supply and fixing for Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:),With Wood Free EPS with 2,4 or 6 raised panel design with 2 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. 38 Repair/Rescuing, easing and adjusting wooden door shutter of any description without taking off shutter from the frame, area of shutter exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, including making good the disturbed area as per existing, complete all as specified and directed. 39 S & F 35 mm thick plain framed panelledfactory made shutters(two panel) with IInd class hardwood rail and style with lock rail and panel of 12 mm BWP commercial ply with commercial vaneer on both faces.The size of rail and style as per IS - 1003 Part - I , kiln seasoned and chemically pressure treated complete all as specified and as directed. 40 S&F 35mm thickmm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified & directed. The rates for flush shutters include for the provision of suitable blocks for taking mortice locks, latches, or other fittings complete all as specifed and directed. 41 S & F 35mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive gauge (without sash bars)edges of framingplain, chamfered or round fitted with cut and mitred beads for securing wire gauge sizes of members as specified in SSR Part-I section 8 clase 8.24(a) of shutters complete all as specified and as directed. 42 M&L for,Mild steel framed work such as in doors or gates of angle, or tee sections with gusset plates, rails, braces,etc. completely drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings (includingof steel sheeting or other covering, running rails and guides) and handing also fastening and fixing complete Gde Fe 410 - W (Grade-E- 250) quality-A complete all as specified anddirected. 43 S & F Powder coated aluminium frame/shutterfor doors, windows, ventilators with one or more rebates including joining cleat for fixing, rubber neoprene packing for fixing, including minor fitting like lock, handle, roller for slidingetc. complete all as specified Note :-1. For payment purpose weight of aluminium section shall be only measured. 2. Cost of aluminum mongry, lock, rubber packing, roller for sliding are included in the quoted rate. 3. Sheet glass and wire gauge shall be measured and paid separately. 44 Taking down boards of any description and any size as in shelves complete all as specified and directed. 45 S & F 19 mm thick fire retardant plywood BWR type including cutting, jointing, fixing with screws as in kitchen cabinet box type complete all as specified and as directed 46 S & F Decorative laminate type1, 0.90 to 1mm thick , of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions, complete all as specified and directed. 47 S&F 18/19mm thick one side prelaminated particle board, interior grade, with decorative choice laminate and fixed with screws to steel/timber frame work including provision of 6mm thick teakwood edging etc complete all as specified and directed 48 S & F fancy type stainless steel handle of size 100 mm longcomplete all as specified and as directed 49 S&F 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished, complete all as specified and as directed 50 S&FStainless steel soft close hinges, suitable for modular kitchen complete all as specified and as directed. (Make : Godrej or techno commercial equivalent) 51 S&F steel window (box type) factory fabricated, double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02Nos for each leaf) duly welded, with glazing bars dovetailed or welded including MS fillets, welding with and including 8mm dia Squareguard bars with one shop coat of red oxide zinc chrome primer overall complete all as specified and as directed Notes: (i) Windows shall be fabricated as per CE Palam drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 (updated up to date) and these drawings shall be referred at the O/o the GE (AF) Ambala (ii) Glazing and wire gauge will be measured and paid separately under respective items herein (iii) Any other sundries, etc. as required at site shall be deemed to be included in the quoted rate (iv) Cost of guard bars shall be deemed to be included in the quoted rate. 52 M&L for Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 53 Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and remove the debris outside of MD land, complete all as specified and directed 54 S&F 3 mm thick sheet glass ordinary quality not exceeding 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed. 55 All as per BOQ Item No.54 above but figured glass complete all as specified and directed. 56 S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repair complete all as specified and directed. 57 S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed complete all as specified and directed. 58 S & F Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and as directed. 59 S & F Aluminium anodized cast type handles 150mm long complete all as specified and as directed. 60 S&F SS butt hinges medium weight of size 100 mm complete all as specified and directed. 61 S & Fin door stopper of rubber and aluminium alloy body, 150 mm size fixed complete all as specified and as directed. 62 S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm, complete all as specified and as directed. 63 S & F magnetic ball catches of standard type fixed complete all as specified and as directed 64 S&F in repairs 20mm dia fancy type powder coated (tint as approved) mild steel of wall thickness 1mm (min) curtain rods / towel rails, etc. fixed with and including 2Nos. suitable powder coated brackets, holders with funnel at ends complete all as specified and as directed 65 Taking down unserviceable GI tubing, supply and fixing new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i)Serviceable Taps, valves in any shall be removed before taking down pipe and same shall be re-fixed while providing new pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item. 66 Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i)Serviceable Taps, valves in any shall be removed before taking down pipe and same shall be re-fixed while providing new pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item. 67 TAking down and Refixing 20mm bore water tubing surface/concealed in same/new location after cleaning and application of bituminous paint on concealed portion of tubingincluding cutting & threading pipe and provision of additional fittings such as socket, tee, elbow, union (if required) complete all as specified and directed.Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately 68 Cutting chases pinning in making good for brick walls to facing where required and pointing in cement mortar 1:3 to ends or edges of concealed water tubing and similar work including making good cutting not exceeding 10CM girth. Complete all as specified and directed. 69 S & F in repair15 mm CP cast copper alloy bib taps fancy type screwed down, screwed for iron pipe or for brass ferrule including taking down old bib taps complete all as specified and as directed. 70 S & F 15 mm pillar taps, cast copper alloy fancy type , chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’with long screwed shanksand fly nuts, screwed for iron pipe including taking down old pillar taps complete all as specified and as directed. 71 S & F in repairs CP fancy type angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 72 S&F in repair chromium plated overhead shower rose 125mm dia with swivel joints with and including overhead shower arm 230mm with wall flange , complete all as specified and directed by GE. 73 S & F 15 mm Supply and fix in repairs, Stop valves (concealed), fancy type with CP wall flanges, chromium plated, cast copper alloy with long shank and exposed part kit with fittings sleeve, operating lever concealed part screwed both ends for iron pipe or for unions, including making good the disturbed portion matching with adjacent surfaces,complete all as specified and as directed 74 S&F in repair, Chromium plated Wall mixer with bend pipe for overhead shower with built-in non return valve with CP wall flanges, fixed in repair complete all as specified and directed by GE 75 S&F in repair Centre hole wash basin mixer for wash hand basinmake complete all as specified and directed 76 S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr tube & hook (braded Tube) and ABS valve including making connection and fixed in position complete all as specified and directed. 77 S&F in repair Single towel rail brass chromium plated 600mm long fixed with chromium plated screw and PVC cleat etc complete all as specified and directed. 78 S & F in repair PVC connecting pipe 600mm long 15 mm dia both end having brass coupling nut and PVC washer all as specified and as directed. 79 S&F Vitreous china white wash down water closet pan (pedestal pattern) with PP soft closing seat cover, hinges, fixing accessories set(excluding flushing cistern and flush pipe), including UPVC (SWR) ‘P’ or ‘S’ trap and connection to drain (or outgoing pipe) and to flush pipe, antisyphonic pipe fixed in repair including dismantling existing water closet etc complete all as specified and directed by GE” 80 S&F Vitreous china White Squatting Orissa Pattern pan of size 580x440mm, including UPVC ‘P’ or ‘S’ trap, front or back inlet andintegral foot rests and makingconnection to trap and to flushing pipe, anti syphonic pipe, fixed in repair including dismantling existing squatting pan and making good to disturbed floor,complete all as specified and directed. 81 S& FVitreous China wash basin, white, flat back, size 550x400mm excluding waste, chain and plug and porcelain stopper but including brackets, including Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms)with 32mmbore PVC waste pipe minimum 800mm longwith inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repairs complete all as specified and as directed. 82 S&F in repairs, PVC valve less, syphonic action type, white colour flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including jointing with new PVC long / short flush bend and making good to the disturbed surfacescomplete all as specified and as directed. 83 S & F in repairs Plain looking mirror of size 600x450 mm with bevelled edge selected quality glass mounted on 6mm thick commercial plywood and fixed with chromium plated brass screw and cup washers complete all as specified and as directed. 84 S & F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, waste pipe and washer’sincluding cast iron cantilever brackets, connecting union etc over all size 915 mm x 460 mm with bowl size 410 x 330 x 160 mm including taking down old steel sink complete all as specified and as directed. 85 S&F stainless steel plate rack of 0.63mm thick sheet, size 24x30x10 complete all as specified and as directed including taking down of old unserviceable kitchen plate rack. 86 S&F in repair PVC waste pipe 32/40mm bore not less than 800mm long complete all as specified and direceted 87 Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 1000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed. 88 Dismantling of water tanks of 500 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed. 89 S&F in repair Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball scrured for iron pipe of dia 20 mm bore complete all as specified and directed . 90 S&F in repair for 15 mm dia Gun-metal, golbe or gate valves/, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed . 91 M & Lin repair Gun metal Gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including cutting the old pipes as in repair complete all as specified and directed 92 S&F in repairCornerglass self assembly consisting of 5.5mm thick sheet glass self 25cm wide with chromium plated bracket guard and fixed with CP screws and wood cleats with wall complete all as specified and directed. 93 S&F in repair glass self assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and rail 60cm long and fixed with CP screws and wood cleats with wall complete all as specified and directed. 94 Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.and Supply and fix, UPVC (SWR) pipes 110 mm dia, type B (conforming to IS 13592) single socketedin any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed. Note :- Provision of necessary scaffolding for replacing defective pipes and safety provision of labours shall be deemed to be included in quoted rates, and nothing extra will be admissible in this regards. 95 Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. and Supply and fix, UPVC (SWR) pipes 75 mm dia, type B (conforming to IS 13592) single socketedin any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed. Note :- Provision of necessary scaffolding for replacing defective pipes and safety provision of labours shall be deemed to be included in quoted rates, and nothing extra will be admissible in this regards. 96 S & F PVC (SWR) bends any radius 75 mm dia of bore with access door, including taking down old bends complete all as specified and as directed. 97 S & F PVC (SWR) branch piece single (single T)equal of bore 75 mm dia with access doorin repairs complete all as specified and as directed 98 S & F PVC (SWR) branch piece single (single T) equal or unequal of bore 110 mm dia, with access door in repairs complete all as specified and as directed 99 S&F UPVC (SWR) bends any radius, 110mm bore with / without access door, complete all asspecified and directed. 100 S & F PVC (SWR) multi-floor trap, plain with chromium plated grating including jointing with solvent cement, 75mm dia, including dismantling the damaged trap, complete all as specified and directed. 101 S&F in repair PVC floor trap/Nahani Trap with plain/single hole CP grating including jointing to waste pipe in cement joint, of outlet 75 mm.dia, complete all as specified and directed 102 M & L for welding in repairs to steel windows / doors exceeding 2.5 cm but not exceeding 5.00 cm in length and thickness of metal to be welded not exceeding 6mm complete all as specified and as directed. 103 Demolitionof cement concrete in ground floor and paving not exceeding 15cm below or above ground level removing debris outside MD landcomplete all as specified and directed 104 Demolition of cement concrete of any description and any position not otherwise specifically provided for. and disposing off debris to outside the MOD land all as specified and as directed. 105 Demolition offloor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles and disposing off debris to outside the MOD land all as specified and as directed. 106 Supply onlyliquid water proofing compound, complete all as specified and directed 107 M&L for Non-skid joint free coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, as in floor set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match colour of tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and as directed. 108 S & F glazed ceramic coloured printed tiles of size 450 x 300X 7mm as in dado set andjointedin neat cement slurry & pointedin white cement mixed with pigment to match with color of tiles over and including10 mm thick rendering in cement motor 1:3 completeall as specified and as directed. 109 M&L for Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular), tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. 110 M&L, for Vitrified tile, skirting/dado, light shade with 10 mm thick tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on vertical rates as in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including backing coat of 10 mm thick CM 1:3 complete all as specified and as directed. 111 Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removing debris outside MD land complete all as specified and directed 112 M&L for 20mm thick Granite work (of any type) (table rubbed and premirror polished) in single piece in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in cement white (1:2) using marble dust with admixture of pigment to match the shade of granite, including making hole for gas pipe including half rounding the edges of granite, laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. 113 M&L for Machine cut Kota stone slab flooring not less than 18 to 20 mm thick (size of stone shall not less than 55cm x 55cm), 75mm wide white marble border around, laid over & including 15mm thick screed base in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirrior finish with machine, complete all as specified anddirected. 114 M&L for Machine cut Kota stone slab not less than 18 to 20mm thick as in riser of steps, skirting, dado and pillar laid over & including 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified anddirected. 115 S& FGI spout40 mm dia medium grade to be embeded in sunken floor complete all as specified and directed. 116 M & L for Rendering 10mm thick in CM 1 : 3 onconcrete surface even and smooth on roof surface incl water proof liquidfinished when concrete is green complete all as specified and directed. NOTE:- Water proofing compound shall be measured and paid separately under respective item of this Schedule. 117 M&L for 60mm thick machine pressed rubber mouldedprecast concreteM-35 interlocking colouredpaver block any shape and size conforming to IS-15658-2006 withgrey cement and pigmentall as specified as directed. 118 M&L for Sand filling under floorsincluding watering and consolidation complete all as specified as directed. 119 M&L for Chequered cement concrete commercial Tiles 30cm x 30cm x 20 to 22mm thick of with grey cement andpigmentsetjointed and pointed in neat cement slurry in floors and cut and polished laid and over 15mm Screed in CM 1:4 all as specified and as directed. 120 M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base of paving/Inter Locking , Hard standing Etccomplete all as specified and Dircected By Engr-in Charge . 121 M&L 25 mm thick PCC 1 : 2 : 4 type B0 (using 12.50 mm graded mechanically crushed stone aggregate) as floor roughto received tile screed/bedding layercomplete all as specified and directed 122 M&L for roof treatment as follows:- Cleaning of dust Removal fo all loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface including removing of vegetation/plantation with no loose material on surface. Repair all joints and cracks with Highly elastic Bituminous cold applied putty of Tarplasic having penetration after setting upto 8mm. Levelling of surface to give proper slope will be done as per site requirements with Shalipatch or equivalent make of approved by GE cold applied, Bituminous Mortar & Cold Emulsion cum waterproofing Liquid ofShalikote-T-10 or equivalent make of approved by GE, Created SSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make of approved by GE mixed with portable water in the ration of 1 :1 and apply @400gm per Sqm (As per Surface Conditions). . Apply first coat of Tarfelt LM or equivalent make of approved by GE having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50 mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm. . Lay Geotex of 45 GSM/ Fibre mesh simultaneously and paste it properly with overlap of 50mm. . Allow the first coat to dry for 10 to 12 Hrs. .Apply 2nd coat on cured first coat with consumption @ 700gm per Sqm in opposite direction of first coat by Brush or Roller. . Allow it to dry for 10-12 hrs after apply 3rd coat with consumption @ 700gm per Sqm. Ensure final curing time of 36 hrs before allowing/ carrying out any further work. Conduct ponding test after min 7 day applying two coats of U V Resistand Elastomeric Exterior Axcrylic Weather resistant water proof coatingof Shalicryl-215 or equivalent make of approved by GE having elongation of 300% after curing of 14 days confirming to ASTM D- 6083-- for U V Protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membranc of Tarfelt LM or equivalent make of approved by GE to give long life and prevent its deterioration from sunlight. Note:- Note:-(i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years.However contractor may deposit the FDR of same amount in favour of GE.If contractor fail to rectify the defect pointed out during this period in writting,the defect shall be got rectified at contractors risk and cost and the payment shall be made from the amount kept reserved or by encasing the FDR deposited by the contractor as guarntee.Contractors quoted rate for this item shall deemed to be inclusive of this aspect. 123 Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed 124 M & L for Rendering /screed bed 15 mm thick in CM 1 : 3 onconcrete surface even and smooth on roof surface, Wall surfaceincl water proof liquidfinished when concrete is green complete all as specified and directed. NOTE:- Water proofing compound shall be measured and paid separately under respective item of this Schedule. 125 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifeid and directed. 126 Pre painted galvalume aluminium zinc coating GI basedPlain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,gulley gutter and ridgesfixed with self tapping screws complete all as specifeid and directed. 127 Dismantling wrought iron of mild steel work of any description not otherwise provided forcomplete all as specified and and directed. 128 M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-290(Gde E-165), complete all as specifeid and directed. 129 M&L for posts and struts in wall fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed by the Engineer-in-Charge 130 M&L for providing cement concretein roof, kerbs, interlocking tiles or roundedor chamfered on edged type B-1 1:2:4( 20 mm graded mechanically crushed stone aggregate) ,complete all as specified and directed. 131 M&L For PCC 1:3:6type C-2 (using 40 mm graded crushed stone aggregate) ,Cement concrete in foundations, filling and mass-concrete complete all as spd and directed . 132 Demolition ofRCC of any description & in any position (reinforcement cut as required to facilitate demolition) and disposing off rubbish outside MD land complete all as specified and directed. 133 M&L for mild steel TMT bars10mm dia and over, cut to length, bent toshape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and incl mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed 134 M&L Precast RCC 1:2:4 type B1 (using 20mm mechanically crushed stone aggregate) as in cover slab of drain, culvert and the like set in CM 1:4 complete all as specifeid and directed. 135 M&L for RCC 1:2:4 type B-1,nominal mix (using 20 mm graded mechanically crushed stone aggregates) as,slab, shelvesin fins, fascia louvers, parapetand railingcomplete all as specified and as directed. 136 M&L for granular textured homogenous wall finishing system consisting of twocomponet system of dry granules (25 Kgs Pack ) Madeof 92% silica particlescoated with fade resistant pigments ,100% arcylic polymer bondringagent(5KG pack)with the applied thickness of thecoating being between 0.8mm to 1.2 mm to be applied on curved ,smoothlevel plastered surface , as per direction /supervision of Engr-in charge , all complete , abovetextured coating should confirm to surface spread of flame class of BS 476 Part 7 :1971 and pull of strength of the coatingto meet JISE6909 all as specified and as manufacture specification /instruction . 137 Disconnecting existing PVC water tank of capacity not exceeding 500 ltrfixed on roof by setting aside (or lowering, if required) for cleaning and removing all scale and dirt from tanks and from mouths of circulating pipes etc and hoisting/refixing/reconnecting in same/new position including writing date of cleaning on each tank with white paint, height/size of letters/figures not less than 10cm in height, and refixing existing serviceable ball valves complete all as specified and directed.” 138 Disconnecting existing PVC water tank of capacity exc 500 ltr but not exceeding 1000 ltr fixed on roof by setting aside (or lowering, if required) for cleaning and removing all scale and dirt from tanks and from mouths of circulating pipes etc and hoisting/refixing/reconnecting in same/new position including writing date of cleaning on each tank with white paint, height/size of letters/figures not less than 10cm in height, and refixing existing serviceable ball valves complete all as specified and directed.” 139 Taking down old water tank cover and Supply and fixing Polyethylene water storage tank covers circular or any other typewith hinges suitable for 500Ltrs/1000 ltrscapacity tankscomplete all as specified and as directed. 140 M & L forproviding and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed. 141 M & L forantitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 Ltres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. 142 M&L for Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and pluging 12mm dia hloles with cement mortar 1:2(1cement:2 coarse sand) to match the existing floors, complete all as specifeid and directed. 143 M&L for Anti-termite treatment at point of contract of wood work by chemical emulsion(in oil and kerosene based solution) @ 0.5 litre per hole by drilling 6mm dia hloles at a downward angle of 45 degree at 150mm centre to centre and sealing the same. with cement mortar 1:2(1cement:2 coarse sand) to match the existing floors, complete all as specifeid and directed.
Contract Date: Apr 28, 2025 Contract Value : ₹ 30.33 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Haryana View Result →
18.
Defence #6747755 AOC
Repair To Certain Misc B/R Items At Air Force Station Under Age (I) Af Amritsar; 84. CEMENT (i) The Associated Cement (xii) Lafarge Cement (Lafarge India (xxiii) M/s Dhruv Industrial Company Companies Ltd. Pvt. Ltd.) Ltd. Brand: “ACC” Brand: “LAFARGE” Brand: “DHRUV” (OPC 43 Gr. & PPC). (OPC 43 Gr. & PPC). (OPC 43 Gr. & PPC). (ii) M/s Cement Manufacturing (xiii) M/s Shree Guru Kripa Cement (xxiv) M/s Chettinad Cement Company Ltd. (Pvt.) Ltd. Corporation Ltd. Brand: “STAR” (OPC 43 Gr, Brand: “SARTAJ” Brand: “CHETTINAD” (OPC OPC 53 Gr & PPC). (OPC 43 Gr. & PPC). 43 Gr, PSC & PPC). (iii) M/s Birla Corporation Ltd Brand: (xiv) M/s Heidelberg Cement India (xxv) M/s Toshali Cements Pvt. Ltd. “BIRLA” Ltd. Brand: “GAJAPATI” (OPC 43 Gr & PPC). Brand: “MYCEM” (PPC). (OPC 43 Gr, PSC & PPC). (iv) M/s JK Cement (xv) M/s My Home Industries Ltd. (xxvi) M/s Barak Valley Cements Ltd. Brand: “JK” Brand: “MAHA SHAKTI” for Brand: “BVCL” (OPC 43 Gr & PPC). PSC, “MAHA” for OPC 43 Gr & (OPC 43 Gr) “MAHA SHAKTHI” for PPC. (v) M/s Orient Cement (xvi) M/s Ultra Tech Cement Ltd. (xxvii) The India Cement Brand: “ORIENT” Brand: “ULTRATECH” (OPC 43 (OPC 43 Gr & PPC) (OPC 43 Gr & PPC). Gr, OPC 53 Gr & PSC). (vi) M/s Mangalam Cement Ltd. (xvii) M/s Parasakti Cements Ltd. (xxviii) Andhra cement Ltd. Brand: “MANGALAM” Brand: “PRASAKTI” (OPC 43 Gr & PPC). (OPC 43 Gr & PPC). (OPC 43 Gr & PPC). (vii) M/s Shree Cement (xviii) M/s Zuari Cement Ltd. (xxix) Century Cements Brand: “SHREE” Brand: “ZUARI” Brand: “CENTURY” (OPC 43 Gr & PPC). (OPC 43 Gr & PPC). (OPC 43 Gr & PPC). (viii) M/s Jaypee Rewa Cement (xix) M/s OCL India Ltd. (xxx) Binani Cement Ltd. Brand: “JAYPEE” Brand: “KONARK” (OPC 43 Gr Brand: “BINANI” (OPC 43 Gr & PPC). & PPC). (OPC 43 Gr & PPC). (ix) M/s Dalmia Cement (Bharat) Ltd (xx) M/s Saifco Cement Pvt. Ltd. (xxxi) JK Lakshmi Cement Ltd. Brand: “DALMIA CEMENT” Brand: “SAIFCO” Brand: “JK LAKSHMI” (OPC 43 Gr & PPC). (OPC 43 Gr). (OPC 43 Gr & PPC). (x) M/s Sanghi Industries Ltd. Brand: (xxi) Ambuja Cement Ltd. (xxxii) Madras Cement “SANGHI” (OPC 53 Gr & PPC). Brand: “AMBUJA” Brand: “MADRAS” (OPC 43 Gr & PPC). (OPC 43 Gr. & PPC). (xi) M/s Prism cement Ltd. (xxii) Saurashtra Cement (xxxiii) Grasim Industries Ltd Brand: “PRISM” Brand: “SAURASHTRA” Brand: “GRASIM” (OPC 43 Gr & PPC). (OPC 43 Gr. & PPC). (OPC 43 Gr & PPC). 85. REINFORCEMENT SAIL/RINL/TISCO/ M/s Shyam Steel Industries Ltd, Durgapur (West Bengal)/M/s SPS Steel Rolling Mills Ltd STEEL (PRIMARY Durgapur (West Bengal)/ M/s Jai Balaji Industries Ltd Durgapur (West Bengal), M/s Steel Exchange India Ltd PRODUCERS) Hyderabad (AP), M/s Jindal Steel & Power Ltd Gurgaon (Haryana), M/s SRMB Srijan Ltd Kolkata (West Bengal), M/s Concast Steel & Power Ltd., M/s Adhunik Metaliks Ltd., M/s Shri Bajrang Power & Ispat Ltd., M/s JSW Steel Ltd., M/s Electrosteel Steels Ltd., M/s Shyam Metalics & Energy Ltd./any other primary steel producer approved by E-in-C‟s Branch 86. STRUCTURAL SAIL, RINL, TISCO, M/s Jindal Steel & Power Ltd Gurgaon (Haryana), any other primary steel producer STEEL (PRIMARY approved by E-in-C‟s Branch PRODUCERS) 87. STRUCTURAL (i) M/s K L Steel Pvt Ltd, Post Box No. 61, Lal Kuan, Bulandshahar Road, Ghaziabad (U.P) (Tele: 0120- STEEL 2867911, 2867915, Fax : 0120-2867917) (SECONDARY (ii) M/s Shri Badrinarain Alloys & Steels Ltd, 95, Stephen House, 4 BBD Bag, Kolkata – 700 001 (Tele: PRODUCERS) 033-2220 5381/2248 1601, Fax: 033-2248 8664) (iii) SRMB Udyog Ltd, 46, BB Ganguli Street, Kolkata – 700 012 (Tele 2236 9999) (iv) M/s Tata Steel Structure, Tata Steel-Tube Division, Jeevan Tara building, 1st Floor, 5, Sansad Marg, New Delhi-110001 (Tele: 991112334, 264601734, 309983, 309986) (v) M/s K L Concast Pvt Ltd, Z-18, Naraina, New Delhi. (vi) M/s Karam Steel Corp, Nasrali Road, PO Box No. 56, Mandi Gobindgarh – 147 301 (vii) M/s T K Ispat (Pvt) Ltd, 409, City Tower, 17, Boat Club Road, Pune-411 001 (viii) M/s Doaba Steel Rolling Mills, Amloh Road, Mandi Gobind Garh (Punjab), (ix) M/s SPS Rolling Mills Ltd, Himalaya House, 3813, 8 th floor, Chowringhee Road, Kolkata-700 071 (x) M/s Shree Sharma Steel Rolling Mills Pvt Ltd, 90 ABC & 91-B, Industrial Area, Jhotwara, Jaipur (xi) M/s Shree Krishna Steel Rolling Mills, Jaipur (xii) M/s Fortune Metal Ltd, Mandi Gobind Garh (Punjab) (xiii) M/s Kamdhenu Ispat Ltd, A-1114, RIICO Industrial Area, Phase-III, Bhiwadi-301019, Distt: Alwar (Rajasthan) (xiv) M/s Paras Nath Steel Rolling Mills, Durga Pur (WB) (xv) M/s Amba Steels, 21/6, West Patel Nagar, New Delhi-110 008 (xvi) M/s Rathi Super Steel Ltd, 3-B, Vandana Bldg, 11, Tolstoy Marg, New Delhi (xvii) M/s Madhav Udyog Pvt Ltd, PO Box No 61, Lakkuan –Buland Sahar Road, Ghaziabad (UP) (xviii) M/s Prem Steel & Allied Industries, GT Road (Sirhind Size) Mandi, Govindgarh, Punjab-147 301 (xix) M/s Kashmir Steel Rolling Mills, SIDW Industrial Complex, Bari Brahmana, Jammu (J&K) 88. Chloro-pyriphos Pest Control (India) Pvt.Ltd, Pest Delfin Pest Control Services New Delhi, emulsifiable Control Services, Delhi, Montari Dhawan Pesticides Delhi, Pest Control Services concentrate Industrial Ltd, New Delhi, JS Pest of India, New Delhi, BL Kapoor, New Delhi, (20 EC) Control Chandigarh, De-Nocil Dr Swarops Pest Control, Punjab United Pest Bombay Control Ludhiana, Pest Eradicators (India) New Delhi, Pest Control corporation Delhi, Pest Control organization Delhi, Trishul 89. Lindane-20 EC India Pesticides Ltd, Lucknow, Kanoria Chemical india Ltd, Pest Control (India) Pvt Ltd. 91. Gammax-20 India Pesticides Ltd, Lucknow, Tata Chemicals, Pest Control (India) Pvt Ltd. 92. Pressed Steel Door M/s SK Steel Fabricators Ludhiana, SS Engg Industries, Ghaziabad, Dahiya M/s Anoop Frames/Chowkhats M/s Sehgal Doors, New Delhi, M/s Industries,Panchkula, M/s Metal Window Industries, M/s for Doors/Cupboard Bhawani Steel Fabriction, Gaziabad, Corporation, New Delhi, M/s Ishwar Industries, Mohata Engg & and Window frames M/s India Mart Intermesh Ltd, Hyat Meerut, M/s Trishul Industies, M/s Aswani & Construction Co, Interiors, M/s Ashish Industries Sons, M/s Jangid Engineering Works, Bikaner, M/s Ghaziabad, M/s GS Udyog, Kanpur, Shri ChhabraSteel Krishna Associates, Panchkula, Steel Master Udyog, Meerut,M/s Industries, Panchkula, Pioneer Fabricatrion Chandni Industries, Meerut, Vardhman Precision Tubes and M/s Ashish profiles, New Delhi M/s Royal Safe Works, Industries, M/s New Delhi, M/s Delite Safe works, New Delhi, Ashwani & Sons M/s Jangid Engineering Works, M/s Steelman Industries, Jalandhar,M/s laxmi steel Works, Rohtak, M/s Ashish Industries, M/s Ashwani & Sons 93. Steel Window/Vents Agew Steel Manufacturer Pvt. Ltd, Ganpat doors, Rajpura, M/s Metal Window Anup Industires, M/s Ahmedebad, Multiwyn Industial Corp, Corporation, M/s Mohindra Fabricators, M/s Chandni Industries, Kolkata, Satkar Industies, Pathankot SK Fabrication (India) M/s Gurjeet Industries, Sen Harvic, Mumbai, Rd Jalandhar, Arcat, M/s Ashish M/s GR Kalsi & Co, M/s SKS Industires, M/s M/s Bihar Bobbin & Industries Steel Plasts Machines, M/S Surbi Metal (India), Engg Works, Katihar, Govind Enterprises,Delhi, M/s GS Udyog, M/s Mohata Engg & Kanpur, M/s Shree Krishna Associates, Construction Co. Panchkula, M/s Jangid Engineering Works, Bikaner, M/s Ashish Jaipur, Godrej and Boyce, Mfg, Mumbai, Steel Industries Master Industires, Jalandhar, Shri Krishna Associates, Punchkula, M/s Bharat Steel fabrication & Engineer, Ghaziabad, M/S Laxmi Steel Works , Rohatak, M/s Steel Man Industries Jalandhar, M/s Ashish Industries 94. Rolling Shutters & Swastik Rolling Shutters & Prakash & Co, New Delhi, Ishwar Industries, Rolling Grills manufacturing works, Mumbai, Meerut Cantt, Dahiya Industries, Panchkula, Hercules Rolling shutters Bangalore, Shubdwar, M/s Prakash Industries, SKS Steel Standard Industries Pune Industires, New Delhi , M/s Akash Rolling Shutters, Delhi, M/s Auto Rolling Shutters Enterprises, Delhi, Rama Rolling Shutters industries New Delhi, Shri Krishna Associates, Panchkula, M/s Bharat Rolling Shutters Industries, Jabalpur, M/s Prakash Rolling Shuttter Delhi,M/S Steelman Industries, Jalandhar, Chabra Steel Udyog. 95. Welded wire Multiweld Wire Co Ltd, Mumbai, Mesh/Fabric Jainsons Sales Crop, Delhi, Jaisons industries 96. Factory made M/s MP Wood Product Indore, M/s Chandigarh Timber Products, Patiala, M/s New M/s Rajendra, M/s Paneled Door Jainwood Industires (Jayana Board) Jagdamba Doors, M/s AB Composites Pvt Ltd, Neha Shutters Delhi, M/s Jain Doors Pvt Ltd Sonipat. M/s Haryana Industries, M/s Supreme Doors Indusries, M/s Goel and allied products, kanpur, M/S NND Wood Brothers, Raipur, M/s Industries, Srigananagar, M/S Shakti Industries, Surbhi, Metal India Dhanaula. M/s Sarab Enterprises, Kangra, M/s Ltd Jodhpur. Ecocell Doors, Udaipur, M/s Massonite Doors, Pathankot, Pioneer Timber Products, Chandigarh, Goyal Industiral Corporation New Delhi, Shri Krishna industries, Panchkula, M/s Laxmi Doors, M/s Joinery Manufacturing Co Kolkata, 97. Factory made Flush M/s Green Ply Industries, M/s Sitapur Plywood Manufacturers Sitapur, M/s Harkirat Industries, door Shutters Centuary Ply, M/s dura Ply. Mysore M/s Laxmi Doors, Lucknow, Merino M/s PR Ceiling Products Chip Board, Archid, Swastik Ply Flush Door, Faridabad. MP Wood, Goyal Wood, M/s Jain Wood Industries Industries Faridabad 98. PVC Door Frame/ Sintex, Rajshri Plastiwood Ltd, M/s M/s Poly Window, Pune Accura, Polytech Shutters Dura Plast Extraction PVt Ltd, M/s Ahmedabad, Fixopan indo Plast Pvt Ltd Fenesta New Delhi 99. UPVC Window/ Fenesta, Veka Industries Pvt Ltd Accura Polytech, Kumar Arch Tech, Poly Doors Mumbai, Kundli Industrial Estate, windows, Pune, H2O Solution (Window & Sonipat doors) 100. Iron Mongery Mowjee, M/s Kitch Architectural Product Pvt Ltd, RS Industries. 101. Standard Mortice Godrej, Harrison, Link lock 102. Hydraulic Door Everest, Universal, Godrej Amar, Sandhu, Priya Closer 103. Anodised Aluminium Fenesta, Jindal, Indal , Hindalco, M/s Alumininum System Corp, Mumbai, Nairs M/s Ashish Industries Doors/ Window/ Ashish Industries Arkinetal Enterprises, New Delhi, Frames/ Partitions Aluminium Manufacturing Co, Kolkatta, Santosh & Co, New Delhi, Dada Aluminum Fabricators, Jalandhar, M/s Alumilite PVt Ltd, Dhiraj, M/s Ajay Industries, Bombay,M/s Ramniklal S Raste,, Jabalpur, M/s Aluminium Tech Industries, Delhi, M/s VR Associates, Delhi, Mahavir, Ambala,Consolidated Engineer Com, New Delhi, Aluminium PVT LTd, Ajit India Pvt. Ltd, M/s Ashish Industries 104. Aluminium wooden Argent Industries, Mowjee, Crown M/s Elite Enterprises, Mumbai, M/s Doors and Window Classic New Delhi, M/s aluminium Fittings Udyog, M/s Mohan Metal Industries Delhi 105. Aluminium Section Hindalco, Jindal, Indal Valco Industries Ltd Chandigarh, Banco Aluminium Ltd. Vadodra Gujrat. 106. Aluminium Sheets NALCO Pvt Ltd, CRIL, Jindal, Jagdish Aluminium Pvt Ltd, Ahmedabad, BALCO Gurjat, Alco Industires Pvt Ltd New Delhi 107. Aluminium ALCO Bond, Aluminium Clad, Alstone Composite Alstrong, Armstrong Panels 108. Particle Board Kitply, Nova Pan Industries, New Bakelite Hylam LTd Asis Particle Board, Shirdi (Veneered Delhi, M/s Green Ply Industries Ltd, Industries, Arolite Ceiling & Unveneered Archid Ply, Bhutan Board, Dura System Pvt Ltd , M/s Laminated) Board Mysore Chip Board Ltd Associate Décor Ltd 109. Plywood for General Dura Ply, Archid ply, Bhutan Board, Swastik Ply, Jaipur, National PlywoodSh Ram Pannels Pvt Ltd Purposes Archid Board, Century, Industries Pvt Ltd, Kolkata, Merino Punjab, Rams Wood & Durian,Mysore Chip Board Ltd Plywood, Mayur Ply, Jayna Plywood, M/s General Industries Ltd, Janardhan Ply Board Industries BLJ Plyam Marketing Pvt Ltd, MP & Co. 110. Decorative Archid Lam, Sunmica, Merino, Lam, Sungloss, Formica, ecolam, Bakelite Laminates Mysore Chip Board,Greelam Hylam 111. Fibre Board(Medium Novapan, Bhutan Board, Kit Ply, Managalam Timber Products, Kolkatta, Density) Mysore Chip Board Ltd, Green Panel Ramco Industries Ltd, DECO, Green Max (plain exterior Grade Panel Max Plain exterior MDF MDF/prelam/veneered MDF/Green Floormax Laminated) 112. Pre Fab Panel Lafarge, Boral Gypsum Board Pvt Ramco Industries Pvt Ltd, Endura M/s PR Ceiling Product, Boards/Wall Lining Ltd, Shri Nepal Board Ltd, Aerolite Modular Systems, Reliance Bldg System, Dexune Marketing Pvt ceiling tiles Ceiling System Pvt Ltd, Hilux, BPB India Gypsum Ltd Ltd, M/s Bharat Steel Roll Armstrong BahadurGarh(Calsi Brand) 113. Galvanised steel SAIL, TATA, Jindal Aone Industires, Bhushan, CRIL, Prestar sheets & Colour Coated galvanized steel sheets 114. Polycarbonate Sheets Duratuff, Lexan , VMT Plaste Ltd M/s Coxwell Domes Engg Pvt Ltd 115. Galvalume sheets Indian Ispat, TATA Blue scope, JSW Multicolor, aone industries, metco Global, CRIL, Kirby, Prestar 116. AC Sheets/AC Boards Charminar, Ramco, Everest Swastik, Bombay, M/s Eternit (Corrugated, Semi Everest Ltd, UP Asbestos Ltd Corrugated) 117. Gypsum Board India Gypsum, Lafarge, Son Industries Kanpur 118. PVC Tiles/Sheet Primer Polyfilm Ltd, Wonder Floor, Rikvin Floot Ltd, New Delhi, Armstrong Fixopen Machineries, New Delhi, Krishna Tiles, Polyfin 119. Glass Mosaic Tiles Johnson, Italia, Coral Mosaic, NITCO Paladio, Accura, Bisazza, Mridul, Unistone, Arihant 120. Terrazzo Tiles / PCC NTC,NITCO, Eurocon, Duracrete Ultra Tiles Pvt Ltd Bharat Oasis vitrified Pvt Ltd. Tiles/ PCC Chequered tiles Tiles, Mehtab Tiles, Regent Tiles, Hindustan Tiles, SS tiles 121. Interlocking Tiles/Exterior Unistone, NTC, NITCO, Ultra, Johnson Terra Firma, A-One tiles, Shree Tiles Tiles/ Paver Blocks Coral, Mehtab, Tiles, Pavit, SS Tiles, Hindustan Tiles 122. Decorative Unitile, Bakelite Hylam (Heritage) NCL Luxture surface coatings, textures/Coatings AltekSeccolor, Dulux (Acratex), Apex Spectrum Paint (Duracast) 123. Exposed Brick Façade Unistone, Pioneer Bricks, Regent Tiles 124. Glazed Earthen Ware H &R Johnson, Kajaria, Somani Orient Ceramic, Asian, Tiles Vermora, Orient Bell 125. Glazed Ceramic/non Skid Kajaria, H&R Johnson, Cera, Unistone, National tiles , Ultra, tiles, Victory Ceratec, Sogo Wall/Floor Tiles Somani, NITCO, Eurotiles, Spartek Orient Ceramic, Asian, Ceramics, Oricle Swastik, Varmora, Orient Granites, Royal tiles, Bell, Bonzer-7 (Trial) GEM tiles, Regency, Romano, Ferrous- Crete, Mashusudan Ceramics, Pavit Ceramic, Oasis Vitrified 126. Vitrified Tiles Somani, Kajaria, Johnson, Orient Bell, Murdushwar Ceramics Ltd, Oasis Vitrified, Oracles (Normal/Anti skid) NITCO Orient, Asian, Swastik, Granito. Crystal, Bonzel-7 (Trial) 127. HDPE Storage Water Sintex, polycon, sheetal Rotex, Fusion, SPL, Diplast Uniplus Tanks Plastics, Aqua Polymers 128. Sanitary appliances/ fittings Hindustan Sanitary Ware, Parryware, Duravit, Madhusudan Blue Star Sanitary, (Chinaware) Cera, Jaquar, Neycer Ceramics Anupam Industires, Sona Ceramic, Prakash Industries, SFMC Solution 129. Water Closet Seats and Parryware, Jaquar, Somani, Commander, Supreme, Prayag, Polytuff, Ajanta, Precision cover (Solid Bakelite) CERA, Neycer Milennium Products Thermostat Moulded toilet seat cover 130. PVC Flushing Cisterns Hindustan Sanitary Wares, Commander, Khodiyar Pottery Works, Precision Products Parryware, CERA, Jaquar, Johnson Pedar, Milennium, Supreme, Prayag Neycer 131. CI Flushing Cistern Hindustan Sanitary Ware, Parryware, Sanifix Inida, Phenoweld Areal Bros, Hind Iron Orient Sanitary Ware Polymer, Anupam industries Foundry, Jaipur Maze Products 132. Stainless Steel Kitchen NIRALI, Kobra, Neelkanth, Jayna Blue Pheonix, Diamond, AMC, RA EngineeringSink with or without Star Prestige, Allex, Neel, Prayag Industries, Plasto Craft, Draining Board, Plate Polymers, Anupam Industries, Impex Sanitation, Kodar Rack Vardhaman Enterprises (Jain Industries ko), Elite Metal Products, Franke India Pvt Ltd Prakash Sanitary Appliance, Shakti Enterprises 133. Ball Valves (Horzontal Dripless Faucets India, Flowjet , Ball Hind Enterprises, Prakash & Plunger type) Valves India. Co, Leader valves, Bombay metal, Taurus Engineering Industries, Prima 134. Shower Roses Chromium GEM,JAQUAR Jainko, Blustar, Prima 135. Bath room Fancy fittings JAQUAR,GEM,MARC, Anchor, Spectrum, Pico, Dripless, Kingston, Prima 136. Bib Taps and Stop Taps JAQUAR, PARKO, GEM, Marc, ESS ELITE, Zim, Prima, Essco, (CP) Fancy fittings ESS, Jainko, Prayag 137. Ready Made Bathroom Jaquar, Cera, Commander, Parryware Gratolite,Alpina,Prayag Cabinets 138. Salt Glazed Stone Ware Devraj Industrial, Buran, Perfect Santiary Shri Kamakshi Agencies, Hind Bhaskar Sons, TriumatiPipes/ Glazed Stone Ware Pipe, Superme Pipe and fittings Creamics, Bhardwaj stone Ware, Moulds, Kiran Potteries Pipes Binary Udyog, Creamic Industries 139. Concrete Hume Pipes Indian Hume Pipe Company Jain Spun, Daya Spun Delhi Hindustan Pressure Spun pipe, Ramnik Enterprises Pipes, Bhasker Sons 140. AC Pipes Hyderabad Asbestos,Everest, Ganga JK Super Pipes, Sarbamangala Poddar Industrial Asbestos, Konark Cement and Asbestos Manufactruing Co, Maharashra Corporation Asbestos 141. PVC Rain Water Supreme, Finolex, Reliance Kissan, Prince, Diplast Plastics Pipe/Sewage Pipes 142. GI Pipe /fittings Jindal, TATA, NECO, UNCO Steel Nidhi Pipe Ltd,Swastik Ltd, Tirupati, J-Steel, JTL Industries, Bharat Steel Tube Delhi Surya Roshni (Prakash) Indus Tubes Ltd 143. CI Pipes Fittings (For SKF,SRIF, Singhal Iron Foundry, Ashutosh Casting Ltd, Veetus Bhara Industrial corpn Sewerage/Rainwater) Hindustan Engineering Products, Jindal Industries Ltd, Anand Founders Delhi, New India Saw, NECO (Jayaswal), HEPCO (Binary & Engineers, Electrosteel, Foundry, Ludhinana, Udyog) Kesoram, BIC. Mahavir Iron Foundry 144. Soil Waste Pipes fittings/ SKF, Singhal Iron Foundry, NECO, BIC steel Manhole Cover SILC 145. PPR Pipes SFMC ,SAFE,WETFLOW Diplast Plastics, VeekayHindustan Plastics & Technocrat Pvt Ltd, AmitexMachine Corpn Polymers, Kitec Industries Ltd 146. HDFE Pipes/SNR Gamson India, Dustron, Rex Kirti Industries India Ltd, Vertex Nandi Polymer, Tirupati, Pipes(Water/Sewage) Polyextrusion Green Poly Pipes, Uniplus, Structurals Ltd, SRIF, SKF Diplast Plastics 147. Sand Cast Iron Spigot & SRIF, RIF (Gola Castings), NECO Raj Iron, Foundary, BIC KK Pumps Socket Soil Waste, Vent (Jayaswal), HIF Kolkatta, Kajecao Pipes & fittings 148. Cement Based Paints Snowcem,Asian, Jenson & Nicholson, Acquolac Paints, Godavari Gattocem, Rubycem, Berger, Duracem Paints, Rajdoot Paints, Classic Cemkote, Snow White Paints, Acro Paints Industrial Corpn149. Dry Distemper/Oil Bound Goodless Nerolac Paints, Jenson & Shalimar Paints, Godavari Distemper/ Plastic Nicholson, Berger Paints, ICI Dulux, paints, Acro Paints Emulsion/ Exterior Asian paints emulsion/ Silicon paints & Coating 150. Plastic Emulsion Paint Berger (Silk,Rangoli easy clean), Asian Berger (Rangoli emulsion), Berger (Bison emulsion), (Royale, Apcolite advance), Akzo Nobel Asian (Premium emulsion), Asia (Tractor emulsion), (Velvet touch), Nerolac (Impression Akzo Nobel (Super smooth), Akzo Noble (Rainbow), Ecoclean, impression 24 carat) Nerolac (Lotus Touch Beauty Nerolac (Beauty silver, Gold), Jenson & Nicholson Little Master), Jenson & (Eqvt. Make), Shalimar (Eqvt. Nicholson (Eqvt. Make) Make) Shalimar (Eqvt Make) 151. Paint Exterior Berger (Weather Coat all guard), Asian Berger (Weather Coat smooth), Berger (Walmasta), (Apex Ultima) Akzo Noble (Weather Asian (Apex weather proof) Asian (Ace) Akzo Noble shield max), Nerolac (Excel total) Akzo Noble (Weather shield), (Promise), Nerolac Nerolac (Suraksha Advanced) (Suraksha Plus) 152. Synthetic Enamel Paint Goodless Nerolac Paints, Jenson & Aquolac Paints, Shalimar Paints, Nicholson, Berger Paints, ICI Dulux, Acro Paints Asian paints 153. False Ceiling Tiles/ Board Lafarge, Boral, Gyproc, Armstrong, Reliance big System , BPB India Dexune Marketing, (Gypsum Board/ POP/ Diaken, Lloyds, Luxalong. Ltd, Shree Nepal Boards, Bhutan Endusa Modular System Mineral Fibre) Boards, Duratuff, Anchor 154. Drapery rods Vista Levalor Vista Levalor Vista Levalor 155. Mirror Looking Saint Gobain, Modi Float, Triveni Float Saint Gobain, Modi Float, Saint Gobain, Modi Glass Triveni Float Glass, Crown, Float, TriveniFloat Prayag polymers Glass, Crown, Prayag polymers ... more in document
Contract Date: Jan 31, 2025 Contract Value : ₹ 9.50 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 9
Punjab View Result →
19.
New and Renewable Energy #5785107 AOC
Tender For Retrofitting And External Painting Works Phase - Vi To Residential And Non Residential Buildings In Visweshwaraya Sector At Anupuram Township.; 1 Providing and fixing double scaffolding system (cup lock type) on the exterior side at all height made using 40mm diameter M.S. tube spaced @ 1.5m center to center at both horizontal and vertical joining with cup and lock system with M.S.tube, M.S.tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc., including maintaining it in a serviceable condition for the required duration as approved, removing after completion of repair works, the scaffolding system shall be stiffened with bracings, runners connection with the building, etc., wherever required for essential safety features for the workmen, etc., all complete as directed by Engineer-in-charge.Note: 1) The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. 2)The buildings are of Ground+ 2 storeyed structure and the contractor has to observe all safety procedure while working on heights as per I.S. 3696 (Part-I) - 1987. (Safety Code for scaffolds).3) All working platform must be of minimum 600 mm wide, made of M.S pipe and must have guard rails as per specification.4) Screen of suitable material shall be provided to the full height of scaffolding and securely tied to protect falling objects coming out during the repair work is in progress.5) To protect workers on lower platform against falling objects from higher level over head protection should be provided on the scaffolds.6)Necessary aluminium/ M.S. ladder shall be provided at the cost of the contractor, to the full height of scaffolding at required location around the building to enable Departmental Supervisor/Engineer climb up and closely watch the repair work of the building. 2 Providing and laying in position of plain cement concrete 1:2:4 using machine crushed hard broken granite stone of nominal size 20mm for all insitu levelling courses in foundations, floor, roof screeding, encasing pipes, etc., including mechanical mixing, ramming, compaction, leveling, curing, dewatering, if any including the cost of formwork etc., all complete as per specifications. 3 Providing, cutting, bending, placing and binding steel reinforcement using TMT bars of Fe-500 / Fe-500D grade in all reinforced cement concrete works including preparation of bar bending schedules, cutting, bending,fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire, welding of reinforcement to existing steel reinforcement/ shear connectors, cost of cover blocks in C.M 1:2, etc., complete as per specifications and as directed by Engineer-In-Charge. ImportantNote: The required quantity of steel reinforcement as mentioned in the schedule should be procured by the contractor only of SAIL, Rashtriya Ispat Nigam Limited (VIZAG), TATA Steel & JINDAL from authorised dealers which shall conform to IS: 1786 (Latest Edition). 4 Providing and laying brick masonry in Cement Mortar 1:6 with well burnt chamber bricks/FALG bricks of approved quality in all shapes and sizes at all lifts including scaffolding, curing, raking out joints, etc., all complete as per specifications and as directed by Engineer-in-charge. 5 Providing and constructing 110mm thick (plus or minus 5mm) brick work in Cement Mortar 1:4 using well burnt stock brick/ FALG brick including scaffolding, curing, raking out joints, dismantling the existing brickwork, disposing the dismantled debris within 2 Kms lead etc., all complete as per specifications and as directed by the Engineer-in-charge. 6 Plastering with Cement Mortar 1:5, 12mm thick for brickwork / Concrete on its external faces at all lifts including scaffolding, curing and forming grooves wherever necessary all complete as per specifications and as directed by the Engineer-in­charge. (Note:- 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with cement @ 60 gms of glass fibre per 50 kgs of cement) 7 Plastering with Cement Mortar 1:3, 20mm thick including supplying and mixing of approved water proofing compound at the rate of 2 % (two percent) by weight of cement and finished smooth with a floating coat of neat cement and including chipping the plastering, applying bonding agents, disposing the dismantled debris within 2 kms lead etc., all complete as per specifications and as directed by the Engineer-in-charge. (Note:- 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with cement @ 60 gms of glass fibre per 50 kgs of cement) 8 Supplying and fixing in position of Alkali resistance Glass fibre mesh (4-5mm square aperture with 145 gsm) over the joints of RCC and Brick work with cement paste before plastering as directed by Engineer-in-charge. 9 Chipping of unsound/weak reinforced cement concrete material from slabs, beams, columns, etc., with manual Chisel and / or by standard power driven percussion type of approved make at all lifts including tapering of all edges, making square shoulders of cavities, cleaning the exposed concrete surface and reinforcement with wire brushes, disposal of debris within 2 Km lead, etc., all complete as directed by Engineer-In-Charge. 10 25mm average thickness 11 50 mm average thickness 12 Providing anti corrosive treatment to steel reinforcement by removing the rust from corroded reinforcement and applying anti-corrosive chemicals as details below including cleaning of reinforcement from rust to give it a total rust freesteel surface by using alkaline chemical rust remover with paint brush, removing loose particles after 24 hours of its application with wire brush, thoroughly washing with water and allowing it to dry, applying anticorrosive coating, etc., all complete as per manufacturer specification and as directed by Engineer-In-Charge. 13 Bars upto 12 mm diameter 14 Bars above 12 mm diameter 15 Providing and fixing of 10mm dia shear connectors/ steel reinforcement in reinforced or plain cement concrete by drilling 12mm dia holes at 1mtr c/c or as specified with power driven drill machine to a minimum depth of 75mm and upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars/ shear connectors including drilling holes, fixing the steel bars in position using epoxy resin anchor grout of approved make, etc., all complete as directed by Engineer-In-Charge.(Note:- The cost of steel reinforcement will be paid for seperately under relevant item) 16 Repairs to damaged RCC structural members at all locations and all lifts using SBR Polymer modified plain/ reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness including preparing the dismantled concrete surface by hacking the surface for better adhesion, treating the exposed steel reinforcement using approved chemicals, providing additional reinforcement, if any required, applying bond coat, filling/plastering with polymer modified concrete repair mortar in layers using approved polymers, curing, cleaning of floor/windows thoroughly on completion of repair work etc., all complete as per specifications and as directed by the Engineer-in-Charge.(Note:- Cost of additional reinforcement, shear keys, form work and anticorrosive treatment will be paid for separately under relevant item) 17 20mm average thickness 18 40mm average thickness 19 Repairs to internal/ external plastering over brick work/ concrete at all locations and all lifts using Polymer modified cement repair mortar including preparing the surface by hacking the surface for better adhesion, providing glass fibre mesh or chicken reinforcement, if any required, applying bond coat, filling/plastering with polymer modified repair mortar in layers using approved polymers, curing, cleaning of floor/windows thoroughly on completion of repair work etc., all complete asperspecifications and as directed by the Engineer-in-Charge. 20 12mm average thickness - Plain plaster 21 20mm average thickness - Plain plaster 22 19mm average thickness Rough cast plaster (7 mm thick rough cast in C.M 1.3 using 6 mm and below size granite chips over 12 mm thick base coat) 23 Repairs to the wall and ceiling cracks by chipping and removing the damaged portion upto 20 to 30mm deep, 100 to 200mm wide and plastering with CM 1:3 including making grooves over cracks, grouting with cement slurry or approved crack filling compound ofapproved make, providing glass fibre mesh or chicken reinforcement over the area, applying SBR based bonding chemicals, finishing the surface, curing, disposing the debris at suitable places within 2Km lead etc., all complete as per specification and as directed by Engineer-in-charge. 24 Repairing and rectifying the roof leakage around rain water down take pipe 110mm dia/water line pipes repair works including chipping the existing brick bad coba, preparation of surface, applying bonding agents, fixing fibre reinforcement mesh around pipes, filling PCC 1 : 2 : 4 and finishing top surface with CM 1:3 with to required slope and alignment including the cost of materials, transportation etc., all complete as directed by the Engineer - In - charge. (Note:- PCC 1:2:4 will be paid for separately under relevant item.) 25 Providing Painting over all exposed surfaces at all heights over rough cast plaster / plain plaster with One Coat of SBR based bond coat of make MC Bauchemie (Naufufill-SBR) or FOSROC (Nitobond SBR) or FAB Chemical (Mixbond SBR) or Bostik (Boscocem 475) or Ultratech (Xtracrete). Mixing ratio of chemicals, consumption and application shall be as per manufacturer specifications. 26 Painting allinternal faces of walls / plastered surfaces with One coat of Interior Emulsion paint of make Asian (Tractor) / Berger (Bison) or other approved equivalent make of approved shade over a coat of primer of make Asian (Professional) / Berger (BP Primer) or other approved equivalent make including preparation of surfaces by scrapping the existing white wash / colour wash using scrapping / sanding machine with dust free vacuum collection system, cleaning the existing white wash/colour wash area, roughening the surface, washing the area thoroughly with lime and soda mix or other approved chemical using high pressure washer, preparing the surface dust free for applying the primer coat,applying approved make wall care putty to make surface smooth without porous by using putty knife and sand papers, the dust accumulated during scraping shall be collected in appropriate dust bin collector/ equipment and disposed with in 2Kms lead, etc., all complete as per specification and as directed by Engineer-in-charge.(Note: The sample shall be got approved by the EIC before making bulk order.) 27 Providing Painting over all exposed surfaces at all heights over rough cast plaster / plain plaster with Two Coat of premium exterior emulsion paint ofmake Asian (APEX - Dust proof exterior emulsion) / Berger (Weather coat smooth)or other approved equivalent make of approved shade over a coat of exterior wall primer of make Asian / Berger or other approved equivalent make including preparation of surfaces by scrubbing / cleaning the fungus / stains, cleaning with water, filling the cracks with approved crack filler and including cost of all materials, labour, tools and plants, curing, scaffolding at all lifts, etc., all complete as per specifications and as directed by Engineer-In-Charge. Note:- 1) The samples should be got approved by the EIC before placing.2) The contractor should give warranty for the finishes for a period not less than 5 years as specified in tender conditions from the date of completion of the work. 3)Guarantee bond for 5 years period in the approved format has to be submitted by the contractor.4) 50% (Fifty percent) of security deposit will be retained as performance security for the guarantee period and the same will be released after successful completion of the guarantee period i.e., after five years to be reckoned from the date after the maintenance period prescribed in the contract. 28 Painting over Plain Plaster at all lifts. 29 Painting over Roughcast Plaster at all lifts. 30 Providing Terracotta Paintingover Honey comb wall / Roof tiles / facia tiles at all heights with one coat ofAcrylic Emulsion paint of make Asian (APEX - Dust proof exterior emulsion) / Berger (Anti dustt weather coat) or other approved equivalent make of approved shade and colour including cleaning, preparation of surfacesby scrubbing / cleaning the fungus / stains, cleaning with water, filling the cracks with approved crack filler, curing, scaffolding etc., all complete as per specifications. Note:- 1) The samples should be got approved by the EIC before placing.2) The contractor should give warranty for the finishes for a period not less than 5 years as specified in tender conditions from the date of completion of the work.3)Guarantee bond for 5 years period in the approved format has to be submitted by the contractor.4) 50% (Fifty percent) of security deposit will be retained as performance security for the guarantee period and the same will be released after successful completion of the guarantee period i.e., after five years to be reckoned from the date after the maintenance period prescribed in the contract. 31 Flush pointing on roof tiles by removing the damaged pointing over existing roof tiles, cleaning, removing any growth of vegetation, washing thoroughly, pointing the joints with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement including filling the gap with polymer modified mortars or other approved water proofing chemicals etc., all completed as per specification and as directed by the Engineer-in-charge. 32 Providing and laying machine made 20mm thick burnt clay flat terrace tiles of size 230x230mm conforming to IS 2690 ( Part - I) of make Nuvocotto or other equivalent make colour and pattern over roof at all elevations jointed with cement mortar 1:4 (1 Cement : 4 Coarse sand) mixed with 2% of integral water proofing laid over a bed of 20mm thick cement motar 1:4 (1 Cement : 4 Coarse sand) and finished neat complete. 33 Painting for doors, windows and grills with One coats of PU finish paint of make MRF (Metal coat) or other approved makeand colour at all lifts including cost of all materials, scaffolding, labour, preparing the surfaces for receivingthe paint by scraping, rubbingetc., as per specification. 34 Painting the existing Doors, windows, grills, pipe line and rolling shutter, etc., with one coat of synthetic enamel paint of approved make and brand, shade and colour including cost of all materials, labour, tools and plants, scaffolding, smooth, all lifts / height with safety measures, etc., complete all as per specification and as directed by Engineer-in-charge. [Note: The samples should be got approved by the EIC before placing.] 35 Polishing the existing handrails, notice board, wall panelling and other wooden areas at all lifts with one coat of Touch wood of approved make including preparation of surfaces by scrapping with suitable tools or with suitable grade of sand paper, cleaning the surface dust free for applying the polish, disposing the scrapped debris, applying sealer, suitable filler materials wherever required, cost of all materials, labour etc., all complete as per specification. 36 Providing and fixing in position aluminium partitions, doors, windows, ventilators, louvers,fixed glazing, sliding windows north light glazing, sliding shutter E Channel etc., using heavy duty standard anodized aluminium extruded sections, anodized aluminium sheets as per relevant IS code of JINDAL or approved equivalent make including pivots, approved door and window handles, door stopper, EPDM gasket, neoprene gasket lining, stainless steel screw, mastic filling, weather strips, washers, reinforcing the door shutters at top and bottom with MS rod threaded and fixed to vertical members, etc., as required and as per drawing etc., all complete at all heights and as directed by the Engineer in charge.Note:- 1. Payment shall be made on the basis of weight of aluminium members/section fabricated and actually installed in position without extra allowance for wastage no extra payment shall be made for non-aluminium consumable items like screws, gasket, weather strips PVC/Neoprene lining, sliding wheels for windows, in built tower bolt, reinforcing rods, etc.,2. Glazing, particle boards, aluminium grills, mesh etc., will be paid separately under relevant items.3. All fittings except under Note-1 will be paid seperately under relevant item and the fittings shall be of matching colour anodized aluminium sections. 4. The aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cleat angles at no extra cost.5. The aluminium section shall be anodized with MATT FINISH (15 micron thick) finishing and of approved shade/colour with the approval of Engineer-In-Charge. 37 Providing and fixing in position of 10mm thick Cement bonded pre-laminated particle board of `Bison Lams or approved equivalent make panels prelaminated with decorative lamination on both sides for door shutters, partitions, cupboard shutters, sliding shutters, etc., including cutting to required shape and size, making as per drawing with Anodized aluminium frame alround with lock rails at the centre for each leaf, fixing in structural opening, providing teakwood lipping alround for sliding shutters, etc., all as per specification and as directed by the Engineer-In-Charge.(Note:- Aluminium frame work will be paid for seperately under relevant item.) 38 Providing and fixing Aluminium butt hinges of size 75 x 45 x 3.20mm conforming to IS : 205 of make Classic or Crown or approved equivalent make including anodised transparent or dyed to required colour or shade, fixing with necessary CP screws, etc., all complete as per specification. 39 Providing and fixing IS:208 marked Aluminium handles of size 125mm x 12mm dia. of make Classic or Crown or approved equivalent make including anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade, fixing with necessary CP screws etc., all complete as per specification. 40 Providing and fixing ISI marked Aluminium sliding door bolts (Aldrops) of size 250 x 16 mm Classic or Crown or approved equivalent make as per IS 2681 including anodised transparent or dyed to required colour or shade, fixing with 5 Nos of clip and staple with necessary CP screws etc., all complete as per specification. 41 Replacing the damaged CI soil waste pipe by supplying, laying and fixing of PVC pipe lines laid, embedded under floor slab and fixed to walls wherever required using Finolex or approved equivalent make of SWR uPVC pipes - Type B (suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) conforming to IS:13592 - latest edition with ISI mark and PVC pasting type specials such as door bends, door tees and cowls etc. heavy quality for soil waste or vent or antisyphonage PVC pipe including removing the damaged CI pipe, chipping/removing the embedded pipe if any, fixing the new PVC pipe with suitable clamps over Teak Wood packing pieces, restoring the same to its original condition, disposal of debris within a initial lead, stacking of retrived CI pipes at GSO stores etc., all complete as per specification and as directed by Engineer. 42 90mm OD SWR-uPVC pipes and specials (Type B) 43 110mm OD SWR-uPVC pipes and specials (Type B) 44 Providing and fixing 110mm size of Upvc roof corner rainwater gratings of premium quality approved make over the rain water pipes including fixing in CM 1:3 as per specifications. 45 Numbering the houses by writing letters/ numbers/ symbols with enamel (Marker) paint of approved colour on the face of the wall/ Display Boards using templates and stencil cutting, including base painting, cost of materials, labours, scaffolding, applying wall care putty wherever required to making surface smooth, etc., all complete as per specification and as directed by the EIC. 46 200mm size letters of approved font over base area upto 0.25 sq.m for name plates - maximum five letters in each. 47 200mm size letters of approved font over base area upto 0.55 sq.m for name plates - maximum Twelve digit letters in each. 48 150mm size letters of approved font over base area upto 0.15 sq.m for house letters - maximum four digit letters in each. 49 100mm size letters of approved font over base area upto 0.16 sq.m for house letters - maximum six digit letters in each. 50 75mm size letters of approved font- maximum two digit letters in each. 51 Dismantling Brick workin cement mortar at all lifts including clearing and depositing the debris within a distance of 100 metres all as directed by Engineer-in-charge.
Contract Date: Dec 13, 2024 Contract Value : ₹ 1.07 Crore
Government Departments No of Bidders 3
Tamil Nadu View Result →
20.
Defence #4427357 AOC
Bids Are Invited For Development Of Children Play Area Erecting Ms Frame For Pre-Fab Structure By Using 38Mm X 38Mm Ms Tube With Metal Coasting In Proper Line Grid And Plumb , Pf Of 8Mm Thick Everest Board Internally On Ms Frame To Create A Room With Proper Joinery , Pf Of 8Mm Thick Everest Board Externally On Ms Frame To Create A Room With Proper Joinery , Pop Ceiling Suspended With Gi Framing In Proper Grid And Line , Concealed Electrical Work , Electrical Fittings From Syska Philips Or Equivalent 15 W Led Panel 42 08 Qty Inch Ceiling Fan 01 Qty , Painting Includes Application Of Primer And Oil Paint Smoothening Of Walls For Preparation Of Wall With Wooden Acrylic Cut Outs Big 06 And Small 02 In Pediatric Patterns , Painting Externally In Apex Ultima With Proper Procedure , Toughened Glass Partition , Pf Of Wooden Door With Partial Glass , Pl Of Rubberised Flooring , Good Quality Children Play Equipments In Moulded Plastic Material , Cushioning On The Walls Up To 2 Inch Ht Total Quantity : 2480
Contract Date: Ref. Documents Contract Value : ₹ 7.87 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Maharashtra View Result →
21.
Housing Urban and Rular Development #4136125 AOC
Furnishing Of Msvp Quarter Of Sskm Hospital, In Alipore Kolkata.- 1 Supply & Installation Of Rhythm Ad 3 Seater Sofa Fab From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Width - 1980 Mm, Depth - 830 Mm, Height - 835 Mm, Seat Height - 430 Mm. Upholstery: • Material : Quilted Fabric. • Shade : Dark Grey. • Thickness : 1 Mm. Frame : • Material : Solid Wood. • Moisture Content: 10 - 12 %. • Thickness Of Plywood Used : 12 Mm & 18 Mm. Seat Foam:• Material : Slab Stock. • Density : 32 Kg / M3 At Seat. Back Foam: • Material : Slab Stock. • Density : 28 Kg / M3 At Seat Webbing : • Material : S Spring. Legs : • Material : Pvc As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 2 Supply & Installation Of Rhythm Ad 1Seater Sofa Fab From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Width - 860 Mm, Depth - 830 Mm, Height - 835 Mm, Seat Height - 200 Mm. Upholstery • Material : Quilted Fabric. • Shade : Dark Grey. • Thickness : 1 Mm. Frame :• Material : Solid Wood. • Moisture Content : 10 - 12 %. • Thickness Of Plywood Used : 12 Mm & 18 Mm. Seat Foam : • Material : Slab Stock. • Density : 32 Kg / M3 At Seat. Back Foam : • Material : Slab Stock. • Density : 28 Kg / M3 At Seat. Webbing :. • Material : S Spring. Legs : • Material : Pvc As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 3 Supply & Installation Of Leisure Wing Chair Fab From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Overall Dimension W 810 X D 820 X H 1030. Upholstery: Fabric. • Shade: Two Variants – Blue And Grey. • Thickness Of Upholstery: 1 Mm. • Frame: Material - Pine Wood Frame 12 Mm Plywood Cross Section Moisture Content: 12%. • Foam Density: Seat: Slab Stock Foam Of 28 And 32 Kg / Cubic Meter With Pocket Spring Embedded At Seat. • Back Cushions: Slab Stock Foam Of 28 Kg / Cubic Meter. • Webbing: S Spring. • Legs: Solid Wood As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 4 Supply & Installation Of Tuxedo Centre Table From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Overall Dimension 600Mm Dia Top From 8Mm Mdf Board Finished In Colour Of Choice Or 1Mm Isi Laminate X 600Mm Ht. Understructure: It Is A Welded Assembly Made In Ms Pc In Black Having Dis. 12Mm Dia Hollow Section As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 5 Supply & Installation Of Skyline Centre Table From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Overall Dimensions W X H X D ( Cm ) 90 X 40 X 90. Primary Material: Prelaminated Particle Board. Finish Color: Black As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 6 Supply & Installation Of Altair Pouf Fab From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer Dimensions W X H X D ( Cm ) 40 X 44 X 37. Primary Material - Fabric. Upholstery Material - Fabric. Finish Color: Grey As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 7 Supply & Installation Of Splenda Corner Table From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Overall Dimensions Of 1200 ( L ) X 600 ( W ) X 378 ( H ) . Top: Solid Veneer Mdf Table Top Legs: Solid Rubber Wood. Color : Cappucino. As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 8 Supply & Installation Of Cesar Media Unit From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Dimensions W X H X D ( Cm ) 140 X 54 X 40. Material : Sheesham Wood. • Shade : Wood Walnut. • Construction : Pre Assembled. • Top Thickness : 25 Mm. • Effective Wire Management. • Sliding Shutters In Golden Shade Detailing In Black. Background Adds An Intricate Classy Touch To The Look. • Open And Concealed Spaces For Displayas Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 9 Supply & Installation Of Radiance Book Rack From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Overall Dimension Are 1200W X 300D X 2078H. Body - A. Side Panels, Frame & Cross L Bracket Are Made Using 0.8 Mm Crca ( Is:513 ) . B. The Assembly Consists Of 2 Tie Rods, 4 Fixing Brackets And 2 Turnbuckles. The Tie Rods Are Fixed In A Shape Of ‘X’. The Tie Rods Are Made Of 4Mm Diameter Rods Of Ms While Fixing Brackets Are Made Of 2Mm Thick. Crca Is:513 Grade D. Optional Wooden Panel Of 25Mm Thk Plt, E1-P2 Grade Board For Pltit Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue. Under Structure - Under Structure Is Made Of 0.8M Crca ( Is:513 ) . Shelves - A. Shelves Used Are 10 Bend Panel Made Of 0.8Mm Crca ( Is:513 ) . Shelf Panels Are Placed On Shelf Support And Then Fixed Using Nut And Bolts From Below. Standard Config. Consists Of 6 Loading Levels Formed By 5 No Of Adjusted Shelf For Each Main And Add On Unit. Uniformly Distributed Load Capacity Per Each Shelf Is 80 Kg Maximum. Construction- Completely Knock Down Construction. Finish-All Ms Sheet Metal And Metal Frame Components Are Powder Coated With Epoxy Polyester Powder To The Min Thickness Of Min 45 Microns. Stack Ability- The Add-On Units Can Be Stacked Width Wise To Form A Bank Of Racks Having Common Side Panel Up To 4800W. Shelves Back Stiffener - At The Rear Side Of The Shelves Back Stiffeners Are Provided. These Act As Separators Made Of 0.8Mm Thk Crca ( Is:513 ) . Label Holder -It Is An Aluminum Extrusion Of Length 296Mm For Single Body Bookrack, Fitted On To Front Of Body. The Paper Is 300Gsm Matt Finish, To Be Inserted Into The Aluminum Extrusion. The Length Of Paper Is 296Mm For Single Body Bookrack. Optional Accessory - Rollout Shelf: Rollout Shelf Accessory Is A Pull-Out Tray Which Has 2 Nos. ‘C Shaped Brackets Of 1.2Mm Thk. Firmly Mounted On Shelf Support With Adjustable Height. Slides Are Then Fixed On These C Brackets And Rollout Shelf Assembly Is Mounted On The Slides. This Shelf Opens Outwards Up To 250Mm & Has Load Capacity Of 40 Kg Udl. Book Separator: Book Separator Is Made Of 2Mm Thk. Crca Sheet ( Is:513 ) And Is Used To As A Partition And Support For Books Placed Vertically On A Shelfas Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 10 Supply & Installation Of Insight Table From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Work Top:- 25 Mm Thk Plb Tops With 2Mm Pvc Edge Beading. Under Structure:- C-Frame:- 16Mm Thk M.S C-Frame Supporting The Top. Legs: Dia 38.1 1.6Mm Thk Ms Erw Tube. Over All Dimensions:- 900X900x740mm ( Lxbxh ) As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 11 Supply & Installation Of Jack Dining Table From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Length : 150Cm Width : 90Cm Height :75.7Cm Table Meterials & Size :Top: 19Mm Mdf Board With Okume Veneer, Color : Brown Black, Legs: 720 X 103 X 20 Solid Wood , Color : Brown Black As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 12 Supply & Installation Of Rose Dining Chair From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Overall Size : Length : 43Cm Width : 56.5Cmheight : 93.3Cm Seating Height : 48Cmthread:Nylon , Leather / Pvc / Fabric:Pvc Monterry , Frame Material: Solid Wood As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 13 Supply & Installation Of Tuxedo Centre Table From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Overall Dimension 800Mm Dia Top From 8Mm Mdf Board Finished In Colour Of Choice Or 1Mm Isi Laminate X 600Mm Ht. Understructure: It Is A Welded Assembly Made In Ms Pc In Black Having Dis. 12Mm Dia Hollow Section As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 14 Supply & Installation Of Turret Lounge Seating From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Itis Made Up Of Pu Foam In Density 28+-2Kg / Cu.Mtrwith Additional Top Layer Of Supersoft Pu Foam Density32+- 2Kg / Cu , Upholstered With Fabric. Itis Made Up Of Pu Foam In Density 28+-2Kg / Cu.Mtrwith 2Additional Top Layer Of Supersoft Pu Foam Density32+- 2Kg / Cumtr , Upholstered With Fabric. Itismade Up Of 1.2+-0.1Cm Thk Hot Pressed Plywood ( Moisture Resistence & Termite Proof As Per Is:303 ) & Pinewood Of Cross Section Devoid Of Major Knots & & Surface Defects 6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose.It Is A Welded Assembly Made Of Ss ( Grade Ss – 202 ) Tube & Plate With Plastic Endcap. Dimension: 825W X 835D X 860 H As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 15 Supply & Installation Of Cesar Sideboard From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha & Sedex Certified Manufacturer. Dimensions W X H X D ( Mm ) 1000 X 450 X 750. Material : Sheesham Wood. • Shade : Wood Walnut. • Construction : Pre Assembled. • Top Thickness : 25 Mm. • Effective Wire Management. • Sliding Shutters In Golden Shade Detailing In Black Background Adds An Intricate Classy Touch To The Look. • Open And Concealed Spaces For Display As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 16 Parition Skinning With 12 Mm Thk Plyboardsypply And Installation Of Skining 12 Mm Thk. Raw Ply Board Over Frame Work W / Dry Wall Screws At 230Mm C / C. This Would Be Up To50mm Above False Ceiling Level From Ffl.This Would Be Fixed Straight Without Any Specifc Pattern And Hence Achieve Maximum Yield. 17 Partition / Panelling Frame Work With Aluminium Sectionsproviding And Fixing Framework Made In 50Mm X 25Mm Thick Aluminum ( Box Section ) ( 2Mm Thik ) Sections, Placed At 600Mm C / C In Both The Directions As Per Detail Drawing 18 Supply & Installation Ofinformation Desk ( 1200Mm X 7523Mm X 600Mm ) Made Of 19Mm Bwr Ply Structure One Side Dower System Edge Finished Cp Take Lipping. 4 Mm Quality Gallasport Pollis Finished By Lacture Prodium As Per Direction Of Engineer In Charge. 19 Supply And Installation Of Decorative Premium Rugs Hard Carpet Finished With Hd Knitt. Overall Dimension 6Ftx 8Ft As Per Direction Of Engineer In Charge. 20 Supply And Installation Of Decorative Premium Rugs Hard Carpet Finished With Hd Knitt. Overall Dimension 4Ft X 6Ft As Per Direction Of Engineer In Charge. 21 Supply And Installation Of Decorative Premium Rugs Hard Carpet Finished With Hd Knitt. Overall Dimension 4Ft X 4Ftas Per Direction Of Engineer In Charge. 22 Supplying And Laying True To Line And Level Vitrified Tiles Of Approved Brand ( Size Not Less Than 600 Mm X 600 Mm X 10 Mm Thick ) In Floor, Skirting Etc. Set In 20 Mm Sand Cement Mortar ( 1:4 ) And 2 Mm Thick Cement Slurry Back Side Of Tiles Using Cement @ 2.91Kg. / Sqm Or Using Polymerised Adhesive ( 6 Mm Thick Layer Applied Directly Over Finished Artificial Stone Floor / Mosaic Etc Without Any Backing Course ) Laid After Application Slurry Using 1.75 Kg Of Cement Per Sqm Below Mortar Only, Joints Grouted With Admixture Of White Cement And Colouring Pigment To Match With Colour Of Tiles / Epoxygrout Materials Of Approved Make As Directed And Removal Of Wax Coating Of Top Surface Of Tiles With Warm Water And Polishing The Tiles Using Soft And Dry Cloth Upto Mirror Finish Complete Including The Cost Of Materials, Labour And All Other Incidental Charges Complete True To The ManufacturerS Specification And Direction Of Engineer-In-Charge. ( Whitecement, Synthetic Adhesive And Grout Material To Be Supplied By The Contrr ] E ) ( Ii ) With Polymerised Adhesive [ 6 Mm Thick ] & Epoxy Grouting Materials For Filling Joints Including Spacer-2 Mm [ Applied Directly Over Finished Artificial Stone Floor / Mosaic Etc. ] ( A ) Deep Colour & White , Ground Floor 23 Applying Acrylic Emulsion Paint Of Approved Make And Brand On Walls And Ceiling Including Sand Papering In Intermediate Coats Including Putty ( To Be Done Under Specific Instruction Of Superintending Engineer ) : ( Two Coats ) Ii ) Luxury Quality 24 Supply & Installation Of Black Forest Dining Table From Manufacturers Cirtified With Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 ( All Iso Certificate Must Be From Iaf Recognized Accreditation Body ) , Bifma ( Membership ) , Aiota, Green Guard ( By Ul ) , Indoor Air Quality, Griha 2019& Sedex Certified Manufacturer. Dimensions W X H X D ( Mm ) 1170 X 750 X 750. Material : Sheesham Wood. • Shade : Wood Walnut. • Construction : Pre Assembled. • Top Thickness : 25 Mm. • Effective Wire Management. •Intricate Classy Touch To The Look. • Open And Concealed Spaces For Display As Per Direction Of Engineer In Charge. 25 Supply And Installation Of Outdoor / Indoor Garden Chair Table Set ( 4 Chair + 1 Table ) Of Synthetic Rattan Table Dimensions 90Cm Dia Topx 2.5 Foot High, Upper Material - Pu Wicker, Frame Material- Mild Steel, Base - Pu Solids, Foam Density - 40 Density, Heavy Duty Painted / Powder Coated Piped Frame Made Of Ms, High Quality Class A Durable Wicker Is Weaved By Hands Of Professionals Craftsmen, Ms Frame That Makes It Weather Proof & Durable, Primary Material: Rattan As Per Direction Of Engineer In Charge. ( Make-Godrej / Damro Or Equivalent. ) 26 M.S. Structural Works In Columns, Beams Etc. With Simple Rolled Structural Members ( E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp ( 6 ) - 1964 Connected To One Another With Bracket, Gussets, Cleats As Per Design, Direction Of Engineer-In Charge Complete Including Cutting To Requisite Shape And Length, Fabrication With Necessary Bolting, Metal Arc Welding Conforming To Is: 816- 1969 & Is: 1995 Using Electrodes Of Approved Make And Brand Conforming To Is:814- 2004, Haulage, Hoisting And Erection All Complete. The Rate Includes The Cost Of Rolled Steel Section, Consumables Such As Electrodes, Gas And Hire Charge Of All Tools And Plants And Labour Required For The Work Including All Incidental Chages Such As Electricity Charges, Labour Insurance Charges Etc. Payment To Be Made On The Basis Of Calculated Weight Of Structural Members Only In Finished Work As Per Is Specified Weight. Payment For Gusset, Bracket, Cleat, Rivets, Bolts And Nuts May Be Make By Adding The Actual Weight Of Such Items With The Weight Of Finished Structural Members Or 7% Of Weight For Finished Structural Members Weighing Not Less Than 22.5 Kg. / M. Or 15 % Of Weight For Finished Structal Members Weighing Less Than 22.5 Kg. / M. May Be Increased Allow For Bracket, Cleat, Rivet, Bolts And Nuts Etc. And No Seperate Payment Being Made For These Items, As Per Direction Of Engineer In Charge. The Rates Are Considered For A Height Of Erection 8M. / 2Nd Floor Level From The Ground. Add 1.5% Extra Over The Rate For Each Additional Floor Or 4M. Beyond Initiial 8M. Or Part Thereof.I ) For Structural Members Of Specified Sections Weighing Less Than 22.5 Kg. / M 27 Painting With Ready Mixed Red Lead Paint Of Approved Make And Brand :Two Coat 28 Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary : On Steel Or Other Metal Surface :Two Coats ( With Any Shade Except White ) 29 Plaster ( To Wall, Floor, Ceiling Etc. ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding / Staging Where Necessary ( Ground Floor ) . [ Excluding Cost Of Chipping Over Concrete ( I ) With 1:6 Cement Mortar ( A ) 15 Mm Thick Plaster 30 Dismantling Artificial Stone Flooring Upto 50 Mm.Thick By Carefully Chiselling Without Damaging Thebase And Removing Rubbish As Directed Within Alead Of 75 M.A ) In Ground Floor Including Roof. 31 Cutting To Requisite Length Or Shape Departmental R.S. Joists, Channels, Angles, Tees, Plates Etc. 32 Supplying And Affixing Optically Clear Polyester Sun Control Windowfilm Having Acrylic Pressure Sensitive Adhesive On One Side & An Acrylicabrasion Resistant Coating On The Other, With Composition Of Infraredabsorbing Carbon & Free From Any Optical Defect. The Filmcharacteristics Should Conform To Astm E308, Astm E903, Astme84 And Ashirae. The Film Should Be Pasted After Preparatory Workswithout Any Cracking, Delamination, Bubbling, Discolouring Andvariation In Total Transmission Of Light Across The Width At Any Portionalong The Length DoesnT Exceed 2% Over The Average Includingscaffolding & Relevant Others To Complete In All Respect As PermanufacturerS Specification & Direction Of Engineer -In-Charge. ( Note: This Work Should Not Be Executed Without Specific Permissionof Superintending Engineer ) ( A ) Normal Quality : Film Thickness - 1.0 Mil, Glare Reduction >45%, U Factor < 1.15 33 Supplying Designer Woodenbead Of Size 75 Mm X 25Mm ( Finished ) Of Approved Design In True Line And Level Fitted & Fixed With Adhesive And Head Less Pins Complete As Per Direction Of Engineer -In-Charge.A ) Teak Wood Bead 34 Providing And Fixing 5-6 Mm Thk Mirror Of Approved Make On Appropiate Base With Adhesive As Per Drawing And Approval Of Eic ( Make : Saint Gobain Or Equivalent ) 35 Supplying, Fitting And Fixing Boiling Water Proof Ply Conforming To Is: 710-1977 Bonded With Phenol Formaldehyde Synthetic Resin Conforming To Is: 848-1974 Of Approved Make And Brand Fitted And Fixed As Per Design As Per Approval And Direction Of Engineer-In-Charge. [ Excluding The Cost Of Supporting Frame Work And Teak Wood Batten / Lipping ] In Ground Floor ( Iii ) 9Mm 36 Supply, Installation And Placement Of Asian Paints Or Equivalent Make: Supplying & Fixing Vinyl Wall Covering Roll: With Paper Back. Shock-Proof And Scrape-Proof. 100% Washable, Care: Neutral Home Detergents, Resistant To Microorganisms, Mildew, Residual Odors. Good Light Fastness, Peelable. Fire Rating: Mi. In Color Of Choice. To Be Fixed With Water Base Glue. All Complete As Per ArchitectS Specification. 37 Supply And Installation Of 60% Blackout Curtains In Window And French Window With Brackets And Necessary Fittings: Curtain Made With Sophisticated High Quality Designer Approved Fabrics: 100% Pol Fil, Satin Dusk Quality, Gloss Finish, Steel Hue Sl 15, Width 140Cm, Washable At 40*C, Non Chloride Bleach Care Usable, With Martindale Rub Test: 14.000 Of Skipper / Ddecor Or Equivalantwith High Quality Stitching & Imported Quality Tape With Four Side Stitching, Min Twio Inch At Bottom, One Inch At Two Sides And Three Pleated Style Stitching With Stiff Good Quality Buckram Of Min. Four Inch Which Will Be Covered With Above Fabric At Upper Portion Of The Curtain, The Skipper Curtain Tape Will Be Stitched At The Back Side At Desired / Required Position And High Quality Of Pvc S Clip Along With Designer Belt Etc. The Curtain Will Be Hanging From 25 Mm Dia , 1.2 Mm Thick Corrugated Aluminiumrod ( Slickline Or Equivalant ) With Special Finished Powder Coated Coloured Section , Modular Machine Finished Ethnic Look Pvc Finials, Heavy Strong Ms Bracket With Specially Made Wall Fittingsystem And 4 Sleek Pvc Rings In Every Foot Etc Of Mac Sleek Line. Curtain Make Curtainman, D-Decor, Asianpaint Or Equivalantas Per Direction Of Engineer - In - Charge. 38 Three Burner Indian Range With One Under Shelfmake- Star Opus / Bestek Loza Or Equivalent.Dimension- 54 X 30 X 34+12 39 Ss Tandoor ( Coal / Gas ) Make- Star Opus / Bestek Loza Or Equivalent.Dimension- 32 X 32 X 36 40 Three Door Under Counter Chiller With Split Type Compressor Unitmake- Star Opus / Bestek Loza Or Equivalent.Dimension- 60 X 28 X 34+18+12 41 Sandwich Grillermake- Star Opus / Bestek Loza Or Equivalent.Cambro Nilkamal 42 Salamandermake- Star Opus / Bestek Loza Or Equivalent.Cambro Nilkamal 43 Four Door Half Chiller & Half Freezermake- Star Opus / Bestek Loza Or Equivalent.Dimension- 54 X 33 X 84 44 Two Sink Unit With Cross Brasingmake- Star Opus / Bestek Loza Or Equivalent.Dimension- 48 X 24 X 34+4 45 Four Cylineder Gas Manifold With Gas Bankmake- Gma / Bestek Loza Or Equivalent. 46 Gas Pipe Line With Acceseeries Make- Gma / Bestek Loza Or Equivalent. 47 Ss Exhaust Hood With Baffle Filtermake- Star Opus / Bestek Loza Or Equivalent.Dimension- 216 X 36 X 18 48 Gi Ducting For Hot Air & Fresh Airmake- Gma / Bestek Loza Or Equivalent. 49 Fresh Air Grill Make- Gma / Bestek Loza Or Equivalent. 50 2 Hp Axial Blower Fan For Hot Air Exhaust ( 3Phase ) Make- Gma / Bestek Loza Or Equivalent. 51 18 Exhaust Fan For Fresh Airmake- Gma / Bestek Loza Or Equivalent. 52 Supply, Installation And Placement Of Customized Factory Made Pelmet Providing And Fixing Pelmet Of Size 200Mm X 250Mm With Verticals And Horizontals Made Of 19Mm Thick Bwr Plywood Along Walls And Outsidefinished With 1Mm Isi Grade Premium Decorative Laminate Lminate, Inside To Be Finished With Balancing Laminate 0.8Mm As Requiredexposed Surfaces With Pvc Edge Banding Necessary Support, Joint Between The Plywood And The Wall All Complete. Rate To Be Inclusive Of All Accessoriemm S, Such Asfasteners, Clips Etc. All Complete As Per Direction Of Engineer In Charge. 53 Electrical Fittings & Fixtures
Contract Date: Feb 09, 2024 Contract Value : ₹ 64.11 Lakh
Government Departments No of Bidders 4
West Bengal View Result →
22.
Educational and Research Institute #3811692 AOC
Supply, Erection Of Pre-Fab Insulated Partition For Dna Barcoding Building At Dr.Babasaheb Ambedkar Marathwada University Aurangabad. Supply, Erection Of Pre-Fab Insulated Partition For Dna Barcoding Building At Dr.Babasaheb Ambedkar Marathwada University Aurangabad. , Supply, Erection Of Pre-Fab Insulated Partition For Dna Barcoding Building At Dr.Babasahebambedkar Marathwada University Aurangabad. , Wall Panel & Partition Panel 50 Mm Thick Pufinsulated Thick Panel With 0.45Mm Ppgi Sheet Both Sides In 40±2 Kg Density. Puf Panel Shall Bemanufactured By Using High Quality Huntsmans Chemicals & N Pantane As A Blowing Agent. Thepu Panel Shall Be Cfc Free And Zero Ozonedepleting Panel Made Out Of Continuous Line Running On Uninterrupted Power Supply. Panel Shall Have Pre Coated Gisheet On Both Side Of Polyurethane Foam Confirming To Is 12436:1988. The Pre Coated Sheet Shall Be Ofminimum 240 Mpa Steel Grade Confirming To Is 14246:1995 And Shall Have Zinc Coating Of Minimum 120Gsm As Per Is : 277 : 1992, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Micron. The Ppgi Sheet Shall Have Plastic Protective Guard Film Of Minimum 25 Microns To Avoid Scratches During Transportation. The Panels Shall Be Vertically Joined Together By Tongue And Groove Joints. The Pu Foam Shall Be Self-Extinguishing, Fire Retardant Type Having Minimum Density Of 40 Kg/Cu.Mt (+, -2 Kgs). Partition Windows Should Be Provided As Per Requirement. , Supplying And Erecting Prefabricated Door For Labortory Puf Insulated Room Complete Air Tight Of Size 1.7 M (W) X 2.1M (H) Made From 0.5 Mm Thick P.P. Sheet On Both Sides Having Sandwiched Puf Insulation Of 40 Kg/Mtr Cube Density, Thermal Conductivity Less Than 0.02 Wb/Mtr Cube And 50 Mm Thickness Complete Installing Alongwith The Door Frame Firmly To The Cold Room Panels Having Non Corrosive Handles, Locks, Hinges, Heaters In Door Leaf And Frame, Audio Alarm For Door Open Condition, Auto Lock And Release Mechanism In An Approve Manner. , Supplying And Erecting Prefabricated Door For Labortory Puf Insulated Room Complete Air Tight Of Size 1.2 M (W) X 2.1M (H) Made From 0.5 Mm Thick P.P. Sheet On Both Sides Having Sandwiched Puf Insulation Of 40 Kg/Mtr Cube Density, Thermal Conductivity Less Than 0.02 Wb/Mtr Cube And 50 Mm Thickness Complete Installing Alongwith The Door Frame Firmly To The Cold Room Panels Having Non Corrosive Handles, Locks, Hinges, Heaters In Door Leaf And Frame, Audio Alarm For Door Open Condition, Auto Lock And Release Mechanism In An Approve Manner. , Supplying And Erecting Prefabricated Door For Labortory Puf Insulated Room Complete Air Tight Of Size 0.900 M (W) X 2.1336 M (H) Made From 0.5 Mm Thick P.P. Sheet On Both Sides Having Sandwiched Puf Insulation Of 40 Kg/Mtr Cube Density, Thermal Conductivity Less Than 0.02 Wb/Mtr Cube And 50 Mm Thickness Complete Installing Alongwith The Door Frame Firmly To The Cold Room Panels Having Non Corrosive Handles, Locks, Hinges, Heaters In Door Leaf And Frame, Audio Alarm For Door Open Condition, Auto Lock And Release Mechanism In An Approve Manner. , Supplying And Erecting Prefabricated Door Forlabortory Puf Insulated Room Complete Air Tight Of Size 0.762 M (W) X 2.1336 M (H) Made From 0.5 Mm Thick P.P. Sheet On Both Sides Having Sandwiched Puf Insulation Of 40 Kg/Mtr Cube Density, Thermal Conductivity Less Than 0.02 Wb/Mtr Cube And 50 Mm Thickness Complete Installing Alongwith The Door Frame Firmly To The Cold Room Panels Having Non Corrosive Handles, Locks, Hinges, Heaters In Door Leaf And Frame, Audio Alarm For Door Open Condition, Auto Lock And Release Mechanism In An Approve Manner.
Contract Date: Mar 22, 2024 Contract Value : ₹ 41.55 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
23.
Defence #3712652 AOC
Tender For Special Repair For Bldg. No P 13/1, 13/2, 13/3 And 13/4 Ranjit Chowk Under Ge (East) Jrc; 1 Demolition of cement concrete floors and pavings n.exc 15cm thick (below or ground level) incl sunken floor etc and removing surplus spoil out of defence landwhere directed at a level not exc 1.5 m above the starting point all as specified and directed 2 M&L for 75mm PCC 1:3:6 type B1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified 3 M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound Gde A complete all as specified 4 M&L forcement concrete type E-2 1:5:10 (using 40mm graded stone agg ) as in sunken flooring 5 Material and labour for cleaning of cracks & filling of cracks with SIKA latex SBR 100 putty/ Dr fixit 302 SBR latex/ Perma latex SBR/ FORSROC Nitabond SBR latex/ Asian Paints latex as required.(a) Apply one coat of Acrylic modified cementitious coating of SIKA top Seal-107/Brush Bond FOSROC/ Dr Fixit/ STP/ CICO as per manufacturers instructions.(b) Apply glass fabric sheet of SIKA fab 1/ FOROC/ Dr Fixit/ STP while the first coat is wet. (c) Providing and applying a protection screed of 50mm thick in CM (1:4) mixed with Sika platocretere over the applied water proofing coating on horizontal surface and 50mm dia GI spout pipe 600mm(d) All the corners and joints should be pretreated with elastic waterproofing sealing tape with woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/ FOSROC/ Dr Fixit/ STP. Note : Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturers and approved by GE 6 M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded aggregate as in sub floor , sub base; concrete surface finished even &rough to receive topping floor/tiles finish/layer complete all as specified. 7 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified 8 M & L Vitrifiedceramic tiles light shad 10mm thick (Square/rectangular ) polished, area of each tilesexceeding 0.42sqm but not exceeding 1.00 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer all as specified and directed. 9 All as per item No 8 above buton vertical surfaces such asriser, skirting, dado,etc over and incl 10mm thick cement plaster in CM 1:4 rough finisher surface to receive tiles 10 M&L for non skidceramic colouredtiles of size exc 0.09 Sqm and not exc 0.11 Sqm, 6-7 mm thick in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with & including screed bed or beading layer of morter 15mm thick in CM (1:6)for laying floor finishes , complete all as specified and directed. 11 M&L for non skid ceramic coloured tiles of size exc 0.11 Sqm and not exc 0.18 Sqm, 6-7 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. 12 All as peritem No 11 of above but in skirting and 10mm thick rendering as backing coat of CM 1:4 13 M& L for glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry andpointedin white or colour cement to match complete all as specified and rendering 10mm thickin CM 1:4 as in backing coat of wall tiles. 14 M&L for 20-25mm thick machine in cut kota stone slab in single piecesize in treadr & landings of stair cases including bull nose edge,over and incl 15mm thick bedding layer CM 1:6with pigments to match the shade of slab including cutting , rubbing and mirror finish polished complete all as specified and directed 15 Ditto all as per item No 14 above but 18-20mm thick on vertical surfaces such asriser, skirting, dudo,etc over and incl 10mm thick cement plaster in CM 1:4 rough finisher surface to receive tiles 16 Demolition of reinforced cement concrete of any description and in postiion not other wise specifically provided for. 17 M&L for MS TMT bars 10 mm dia and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for column hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia. 18 M&L for reinforcement cement concrete type B0 1:2:4 (12.5 mm graded aggregate) slabsupported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified 19 M&L for 18-20 mm thick machine cut granite (of any type ) tilesstone jointed with neat cement slurry mixed with pigment to match the colour of stone incl cutting and polishing and making hole in stone and RCC shelves suitable for gas pipe, with round edges where required and incl 15mm screed bed with CM1:6 all as specified and directed by Engr-in-Charge. 20 Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing surplus spoil out of Defence Landwhere directed at a level not exc 1.5 m above the starting point all as specified 21 M&L 15 mm thick cement plaster in cement mortar 1:6 on internal surface of brick or concrete surface finished even and smooth withoutusing extra cementall as specified 22 M&L 15mm thick cement plaster in cement mortar 1:4 on external surface brick or concrete surface finished even and fairall as specified 23 M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified 24 S&F in repair squatting pan WC orissa pattern size 580 x 440 mm white with integral foot rest with P or S trap incl provn of cement concrete bedding incl breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specifed. 25 S&F coloured vitreous china wash down one piece water closet withseat cover , hinges, Accessories set, size 625x350x730mmfitting with twin flush fitting with inlet ball valve float and handle,incl fixing bolt,with bottom and cover and mild steel chromimum plated hinging device withcomplete fixed in repairs all as specified and directed by Engr-in-Charge. 26 S&F Vitreous china wash hand basin , white/coloured, flat back 550x400mm ,withpedestal including one number stainles steel CP waste coupling ,32mm dia , Pvc waste pipe with connector , brackets 2 noscuttingfor and pinning in ends of bracketscomplete all as specified 27 S&F in repairPVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brakets complete all as specified and directed 28 S&F PVC connection , reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified 29 S&F 15mm Angle stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handlescrewed at two right angles endsfor both iron pipe or for unionsand fixed in repairs . Model No FON-40053 Make:- Jaquar and equivalent 30 S&F Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type with wall flange complete fixed in repairs. Model No FLR-5047N Make:- Jaquar and equivalent 31 S&F in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make Jaguar and equivalent 32 S&F in repair Hand Shower 105mm round shape multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system as approved suitable for fixing to 15mm bore (dia)Pipe, complete as all specified and as directed. 33 S&Fstainless steel towel rack 600mm long with lower hanger with 3 hooks fixed in repair complete all as specified and directed 34 S&Fchromium plated towel ring15 cm dia complete fixed in repair complete all as specified Model No AQN-7721Make :- Jaquar and equivalent 35 S&F Chromium plated health faucetfor EWC with 1 m long CP tube with CP wall hook superior quality all as specified fixed in repair Make:- Jaquar and equivalent 36 S&F Toilet paper holder of Chromium platedfixed to walls with chromium plated (CP) brass screws,all as specified and directed fixed in repair Model NoAKP-35751P Make :- Jaquar and equivalent 37 S&F in repair Over Head Shower 140mm round shape/150mmx150mm Square, multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system ofapproved MAKE suitable for fixing to 15mm bore (dia) Pipe, complete as all specified and as directed. 38 Supply and hanging bevelled edge mirror of any sizeof selectedquality glass 5.5 mm thick,fixed to wall withscrews and cup washers,hanging devices complete all as specified and directed 39 S&F Soap dish stainless steel chromium plated fixed in repair with brass screws andrawl plug complete all as specified Model No AKP-35731P.Make :- Jaquar and equivalent 40 S&F Corner Glass Shelf (with Bracket) complete all as specifed and directed Model No ACN-1173 Make :-Jaquar and equivalent 41 S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repair Model No ACN-1171N Make:- Jaquar and equivalent 42 M&Lfor PVC bath room cabinet of size 535 x 483 mm x 110 mm with mirrorfixed in repairs all as specified 43 S&F in repair, Stainless Steel Sink 1.0mm thick double Bowl size Overall size 932x442mm and Bowl size 428x392x225mm each for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Stainless steela Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. 44 S&Fin repairSink mixer swinging spout (Wall mounted) for Hot & cold water with connecting legs & wall flanges of approved MAKEsuitable for fixing to 15mm bore (dia)Pipe, complete as all specified and as directed. 45 S&F for S/S plate rack of superior quality size 2400mm X 3600 mm and not less than 8 kg all as specified and directed 46 S&Fin repair for stainlesssteel pipe 25 mm dia fancy typ curtain roadfixed in the bracketandfancy type finials/side brackets (both side), shade as approved by GE all as specified. 47 S & Fin repair 20mm diacurtain rails , mild steel , chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified 48 Taking up or down 15 mm steel tubing and connections, including cleaning for re fixing or removal to store 49 Taking up or down 20mm steel tubing and connections, including cleaning for re fixing or removal to store 50 Supplying and laying of 16mmouter dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all fittings socket, brass adapters etc complete all as specified and directed. 51 Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all fittings socket adapters complete all as specified. 52 S&F CPVC Ball valve 20mm as in cpvc pipe complete all as specified. 53 S&F 1000 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closedtop) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.ISI marked. 54 S&F 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closedtop) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.ISI marked. 55 S&F 20mmdia Ball valves high pressure of PTMT with epoxy coated Aluminiumrod& highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight-210gms.) 56 S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement. 57 Demolition and braking up drain pipesAC/PVC pipe in event n.exc 150 mm dia including all fittings. 58 S&F for 110 mm PVC (SWR)Rain water pipessingle socketedin any length with rubber ring joints fixed towalls or Floor. 59 S&F for 75 mm PVC (SWR)Rain water pipessingle socketedin any length with rubber ring joints fixed towalls or Floor. 60 S&F PVC (SWR) bends 110 mm. 61 S&F PVC (SWR) bends 75 mm. 62 S&FPVC (SWR) junction single, (Single T) equal or unequal in radius 110 mm bore. 63 Taking down chowkats or frame not exc. 1.5 sq m each with shutters (without taking off shutters from the fames). 64 Taking down chowkats or frameexc. 1.5 sq m but n.exc 4 sq m each with shutters (without taking off shutters from the fames). 65 Taking down shutters exc. 2 sqm each. 66 S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed. 67 S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain mouldedPVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed. 68 S&Ffactory made wire gauzed pvc Door 30mm thick (style) consisiting of frame made out ofM.S.Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour 10mm thick PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 10 mm thick PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing in the frame at the site as per specification & drawing. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly. 69 S & F 30mm thick factory madePVC Flush Cup board shutter consisting of panel of hollow section thickness . Consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles. top and bottom rails and two 19mm x 19mm MS tubes inserted horizontaly inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws Hollow PVC profile shallbe lippedwith 10 mm ( 5mmx 2) thick x 20mm width on stiles and rails using solvent cement . The inner panel shall be laminated with 5mm thick thick termite proof . water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. Complete all as specified as per direction of Engineer-in -charge. 70 Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of H section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. U cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineerin-charge. 71 Supply and fixing Aluminium anodised powder coated Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed with 5mm thick tinted glass & one no. s/s wire mesh panels) upto 1.50m height made of (big series) frame 100 x 45 mm & sash 46 x 62 mm both having wall thickness of 1.5 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced galvanized mild steel section made from roll forming process of required length (shape & size according to aluminium section), appropriate dimension of extruded glazing beads andextruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. 72 Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm(± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge. 73 S&F 2nd class hard wood35mm thickness of factory made plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated. 74 S & Ffactory made IInd Class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified and directed. 75 M&L for pressed steel frame of size 125x60mm for doors with one or more rebates including necessary fixinglugs, hinges,lock strike plate etc complete all as specified and directed. 76 M&L for pressed steel frame of size 105x60mm for doors with one or more rebates including necessary fixinglugs, hinges,lock strike plate etc complete all as specified and directed. 77 M&L Aluminium anodised frame for doors ,windows ventilators with one or more rebates incl joining cleat for fixing etc all as specified. 78 M&L Aluminium anodised window and ventilator side hung type w/o sash bars shutter aluminium section weighing .55 kg/m including necessary cleats glazing clips, rubber neoprene packing,hinges, anodised aluminiun snap beading screws anodised alumininum fittings such as peg stays 150mm long 1 no hinges type B-21 100mm long 2 nossuitable handle 1 no etc all as specified. 79 M & L coloured sheet glass selected quality plain 5.5mm thickness fixed in door shutter/window shutter cut to required size with PVC / Neopane gasket and Aluminium snap beadingComplete all as specified and directed. 80 Supplying and fixing steel windows 1.25 mm thick Box type (primer coated) ERW hollow P section of size 60 mm x 25 mm single rebated comprises of glazedsutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf conisting two Nos sash bar of T section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWR bot T section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nosfor each window including following fittings welded to failed shutter:-(a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window(b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 nos per leaf.(c) MS tower bolt 150 mm long -2Nos per leaf.(d) Z sec 20 mm x 25 mm , 100 long stopper-01 Nos per leaf,(e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 Nos per leaf(f) MS pintal hinges of size 75 mm x 12 mm - 2Nos per leaf.(g) fabriction and fixing arrangement complete.Note:- Grill / guard war , glass paneshall be measured and Paid saperately. 81 All as per description of serial item No. 80above but in gauged shutters without sash bars all as specified and directed. 82 S&F 18 to 20mm thick granite(of any type) tilesmachine cut , in skirting/dado/window cill/jamb laid over rendering10mm thick in CM 1:4 and jointedwith grey cement slurry and pointedwith white cementwith admixture of pigmentto matchthe shade of granite stone includinggrinding and polishing complete. 83 S&F in repairfactory made 18mm thick 100% solid WPC (wood polymer Composite) pain board of required size kitchen cabinate as in partition, shelves, wall,drawer ,shutter, etc of required colourcomprising of virgin PVC resign ofvalue 57-60 (suspension Grade), Calcium Carbonate and naturalFibres (Wood Powders/rice husk/wheat husk) and Non toxic additives, made from extrusion process WPC foam sheet single extruded (inner) with density not less than 650kg/cum manufactured by certified company having good screw holding capacity(Screw withdraw stregnth of 2000N (face) & 1100N (edge) Minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being Termit/Borer free, water/Moisture proof, Fire Retardantand fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, All as per direction of Engr in Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company Make Rajshri or equivalent. 84 All as per item No 83 but solid WPC (wood polymer Composite)boarddecorative one side complete all as specified and directed. 85 S&F stainless steel self closing hinge of 75 mm size for PVC door shutter / kitchen cabinet complete as specified and directed. 86 S&F 50 X 15 mm size magnet door catcher for closing for PVC shutter complete as specified and directed. 87 S&F 100 mm size MS mat / glossy finish handle complete as specified and dirceted. 88 S&F mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed. 89 Supply & fix modular type stainless steel plain basket of size 15”x18”x4” (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed. 90 All as per item no 89 as above butstainless steel plain basket of size 15”x18”x6”complete all as specified & directed. 91 All as per item no 89 as above butstainless steel plain basket of size 15”x18”x8” complete all as specified & directed. 92 All as per item no 89 as above butstainless steel partition of size 17”x20”x6”all as specified & directed. 93 All as per item no 89 as above but stainless steel cutlery of size 17”x20”x6”complete all as specified and directed. 94 All as per item no 89 as above butstainless steel grain trolly with stand of size 21”x17”x10” complete all as specified and directed. 95 All as per item no 89 as above butstainless steel cup & soucer, trolly of size 15”x18”x4”complete all as specified and directed. 96 All as per item no 89 as above butstainless steel Plate basket of size 24x30complete all as specified and directed. 97 Supply, Fixing and installation of wall mounted Electric Kitchen Chimney of size 75 cm, compact design suction 1400m3/hr Auto clean type touch control with wave sensor duct dia 150mm including free Kit for installation with duct cover of adequate size make as approved by GE. 98 S&F magic eye brass best quality fixed inmain door shutter approved by Engineer in charge complete all as specified and directed. 99 S&F peg set of six made of stainless steel all as direcred and specified. 100 S&F butt hinges medium weight,Stainless steel , bright polished 75 mm size for fixing PVC cup boardShutter. 101 S&F butt hinges medium weight,Stainless steel , bright polished 100 mm size for fixing PVC Door Shutter. 102 S&F brasshandles125 mm size fixed with screws all as specified. 103 S&F brass tower bolts, 150mm long fixed withscrew all as specified and directed. 104 S&F150 mmaluminium anodised barel tower bolt, of extruded section and fixed complete all as specified. 105 S&F100 mmaluminium alloy handles, cast type, anodisedcomplete all as specified. 106 S & F Hasp & Staple aluminium 100 mm , including bolt to hinge plate and fixed with screws with Cup Board shutter, all as Specified. 107 S & F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars barallel iron doors and similar work conforming to Fe.290.Gde-E-165. 108 S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks. 109 M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane. 110 M&L for 3.00 mm thick plain figured glass, pin headed type andglazing with in oil putty in sqaure n exc .5 sqm in each pane. 111 S&Fbrass floor door stopper 63 mm with two rubber legged all as specified and directed. 112 S&F 300 mm long brass sliding door bolts with sand or die cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolt and fixedcomplete all as specified. 113 S&F for 300mm brass ordinary rat tail pattern springs incl roller plate complete as specified. 114 Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern in roof covering complete all as specified and directed. 115 S&F0.50mm thick (including coated thickness) pre-colour, pre-profiled (Galvalume/Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed. 116 M&L for steel work in tubular/angle trusses, purlins, rafter,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 gradeSt.-240 complete all as specified and directed. 117 Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth. 118 S&F in repair wash basin mixer tap fancy type chromium plated, screwed down high pressure with or without lettered Hot or cold with long screwed for 15mm bore iron pipe and fixed complete all as specified & directed make Jaguar or equivalent. 119 S&F structural steel framed work as in doors frame or gates of angleor other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering.Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed. 120 Dismantlingof brick tiles single layer as in roofcovering complete all as specified. 121 Demolition of mud in roofs any thicknessincludingplastering and leeping(whether full thickness removed or only a part thereof) removing surplus spoil out of Defence Landwhere directed at a level not exc 1.5 m above the starting point all as specified. 122 M&L Cutting out cracks to V-section in existing RCC roof slabs or terracing , cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight) all as specified. 123 M&L for PCC (1:2:4) typeB-0 (using 12.5 mm graded stone aggregate) as in benching, roof padding,roof kerbs or mud stops, coping etc rounded or chamfered on edges. 124 M&L 10mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning theroof top by water etc all as specifiedand directed by Engr in charge with WPC. 125 Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ microconcrate / general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight. 126 Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold appliId of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a companies authorised applicator ”. 127 Demolitionof brick workor stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site all as specified and directed. 128 Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6. 129 M&Lfor repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced withwelded mesh of weightexc 2kg per sqmtrbut n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor. 130 M&L forpreparing new plastered or unplastered wall surfaces and appliedtwo coat of Anti fungal weather coat aacrylic emulsion paint over a coat of primer (X2) complete all as specified and directed by Engr-in-charge. 131 M&L for preparing new surfaces plastered or unplastered surfaces of walls byapply a uniform layer of wall care putty as approved after that let the surface dry then apply two coats of oil bound distemper white or tinted over a coat ofprimer complete all as specified. 132 M&L for three coats of white wash on newly plastered surfaces ofceiling includingpreparation of ceilingsurfaces complete all as specified and directed by Engr-in-charge. 133 Material and labour for complete removal of old decorated plastered surfaces of wall,pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a coat of primer (X2) complete all as specified and directed Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) Make of primer :- Asian (X2) or Equivalent Note :-(a) Each stage i.e preparation of surfaces,application of primer,application of first coat.application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturers instructions, whichever is more is required to be furnished by contractor for this item. 134 M&L complete removal of the existing tratement on walls for Preparation of wall surfaces by scrapping (any No of layers), rubbing down,washing, etc as directed and apply a uniform layer of wall care putty as approved after that let the surface dry then apply two coats of oil bound distemper white or tintedall as directed and specified. 135 M&L for prepration of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc( Plastered or un plastered surfaces) and applying two coat of white (lime) wash on ceiling complete all as specified and directed by Engr-in-charge. 136 M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxidezinc chrome primer complete all as specified and directed by Engr-in-charge. 137 M&L complete removal of the existing tratement on walls for Preparation of wall surfaces by scrapping (any No of layers), rubbing down,washing, etc as directed and applytwo coats of cement base paintall as directed and specified. 138 M&L complete removal of the existing tratement on walls for Preparation of wall surfaces by scrapping (any No of layers), rubbing down,washing, etc as directed and applytwo coats of white wash on wallall as directed and specified. 139 M&L for 75mm thick cement concrete type D-2, 1:4:8( 40 mm grade agg) as in sub base of floor complete all as specified and directed. 140 M&L for durastone vitrified tile 400x400x10 to 12mm thick infloors etc. set and jointed in neat cement slurry and pointed in white orcoloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed. 141 S&F 60 mm thick precast cement concrete M-35 machine pressed inter locking tiles with grey cement and pigments all as specified. 142 M&L for sand cusioning with layer of fine sand 25mm thick over PCC for laying of interlocking paver block complete all as specified and directed. 143 M&L for providing 25mm thick (measured solid) precast cement concrete loures and jallies in PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) including all moulding but excluding frame set in cement mortar (1:4) and incl taking down old jallies complete all as specified and directed. 144 M&L for repair to rolling shutter including ball bearing, greasing and make functional complete all as specified and directed. 145 M&L for preparation of old stone surface of any description over 10 cm girth or width not other described and applying one coat of synthetic enamel paintcomplete all as specified and directed. 146 Dismantling of fencing post/struts of any description (wooden /steel or RCC)incl taking out embeded portion in concrete and making good to disturbed surface complete all as specified and directed. 147 Dismantling chain Link fencing with mesh any type. 148 Excavation in post holes(or similar holes) each in not exc. 0.50 cum getting out returning,filling in an ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance not exc. 50 Mtr and making good surface all as specified & directed. 149 PCC(1:3:6) type C2 (40mm graded stone aggregate) filling in post holes, foundation,and other similar work complete all as specified. 150 M&L for Mild steel angle iron fencing posts and struts in fencing including necessary cutting , drilling , welding etc and bending to swan neck shape as required and drilling holes notching for wire etc conforming to Fe-410-0 or 310-0 complete all as specified and directed by Engr-in-Charge. 151 S&F MS chain link fencing10 guage thickgalvanised steel wire and 50mm x 50mm size mesh fixed tosteel fencing post by nut & bolts etc including provision of binding wire complete all as specified and directed by Engineer-in-Charge . 152 Dismantling of structural steel wors as in grill ,door gatetc complet all as specified and directed. 153 S&F structural steel framed work as in doors frame or gates including hold fast of angle or other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering.Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed. 154 Mild Steel work in flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engrneer-in-charge. 155 S&F mild steel bolt purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut approved by Engineer in charge complete all as specified. 156 Prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 157 S&F 18 to 20mm thick granite(of any type) tilesmachine cut , in skirting/dado/window cill/jamb laid over cementscreed 10mm thick in CM 1:4 and jointedwith grey cement slurry and pointedwith white cementwith admixture of pigmentto matchthe shade of granite stone includinggrinding and polishing complete. 158 Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc includingremoving switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light, accessories for taking credit of unserviceable light and accessories as per Sch of creditand making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved complete all as specified and directed. 159 M&L for point wiring for light/fan point with 1.5 Sqmm (nominal area) FRLS PVCinsulated unsheathedmulti stranded copper conductor of size 1.5 Sqmm cabledrawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel boxes duly painted with anti corrosive paint over a coat of red oxide primer with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cupwashers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engr-in-Charge. 160 All as per srl item No.159 here in before but for one socket outlet 5 Amps on independent board complete all as specified. 161 All as per srl item No. 159 here in before but for one socket outlet 5 Amps on the sameboard controlled complete all as specified. 162 All as per srl item No. 159 here in before but for one bell point controlled by one bell push complete all as specified. 163 All as per srl item No. 159 here in before but for one light point controlled by two way switches complete all as specified. 164 All as per srl item No. 159 here in before but with 2.5 Sqmm(nominal area) FRLS PVC insulated unsheathed multistranded copper conductor cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathedFRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge. 165 S&F in replacement switch piano flush type, 5 Amps, single pole, two way complete all as specified. 166 S&F switch piano flush type, 6 Amps single pole, one way complete all as specified. 167 S&F switch piano flush type 16 Amps single pole, one way complete all as specified. 168 S&F socket out let 6 Amp, 6 pin, 2-in-1 flush type complete all as specified. 169 S&F Socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 16 Amps, flush type complete all as specified. 170 S&F in replacement bell push switch flush type 6 Amps, single pole complete all as specified and directed. 171 S&Fin repairDecorative wall mounting light fitting suitable for 09 watt LED lampcomplete with glass shade/ polycarbonate cover including 1 x 09watt LED lamp complete all as specified and directed by Engr-in-Charge. 172 S&F ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete all as specified. 173 M&L in replacement call bell electric AC (Ding Dong) 240 volt SP complete all as specified. 174 M&L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingsall as specified and directed. 175 S&Ffive step fan regulator, electronic type, single phase,including connection complete all as specified. 176 M&L forsub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of4 Sqmm drawn through in and includingnew PVC rigid non metallic concealed conduit(medium grade) with all fittings including earth continuitysingle wire FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm ( green insulation) with any type of civil work including making good to disturbed surfaces to match existing surface complete all as specified.NOTE: Two run of 4 sqmm wire and one run of 4 sqmm wireas earth wire includingPVC conduit shall be measured as one unit. 177 M&L for replacement of sub main wiring with Four run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 6 Sqmm drawn through in and including PVC rigid non metallic concealed conduit(medium grade ISI marked) with all fittings including two run of earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 6.0 Sqmm PVC insulated with green insulation with any type of civil wk involved complete all as specified. NOTE: Four run of 6 sqmm wire and two run of 6 sqmm wireas earth wire includingPVC conduit shall be measured as one unit. 178 M&L in replacement for sheet metal DB for MCBs, SPN, 4 ways, double door,single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified.Make: EKINOX3 series of Legrend/Acti 9 metalic series of Schneider/Optipro of Indoasian/Osafe of HPL/Metallica of Havells. 179 Supply & FixMCB SPN 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Legrend/ ABB/ Siemens/ Hager. complete all as specified and directed by Engr-in-charge. 180 M&L in replacement for sheet metal enclosurewithconnectors double door epoxy/ powder coated paint inside and out side TPN 6 ways complete all as specified. 181 Supply & FixMCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Legrend/ ABB/ Siemens/ Hager. complete all as specified and directed by Engr-in-charge. 182 Supply and fixing 415V 10KA B curve miniature circuit breaker TPNMCBof40 Amps complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge. 183 Supply and fixing LED lights fitting 1x 20 Watt, 220V AC decorative box type frame with holder including LED tube rod 20 watt connecting up single/ double connections with three core flexible copper conductor cable of suitable size from ceiling rose complete. 184 Supply and fixing LED light fitting mirror type with high out put diffuser 9/10 watt 220 V AC decorative type including connecting up with three core flexible copper conductor cable of suitable size complete. 185 S & F energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection,surge protection operative on AC supply 140 volts to 270 volts pre-wired complete with GI pipe of 25mm bore of suitable length and MS clamp duly painted with two coat Aloxide paint all as specified and directed. 186 S & F LED light fitting 1 x 9/10 W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 187 Supply and fix Single pole and neutral sheet metal encloser with a two pin and earth plug and socket complete with one SP MCB 20 Amps including Top Plug complete all as specified & directed by Engineer-in- charge . 188 Taking down carefully Exhaust Fan of any sweep or make, painting of fans complete (as per previous colour) with synthetic enamel paint by spraying, cleaning all dust etc including replacement of flexible wire,bolts all as specified and directed. 189 Re-fixing of Exhaust Fan of any sweep duly greasing and minor repair work complete all as specified and directed. 190 Supply and fix exhaust fan, Metal body AC single Phase. 230V of size 225/230 mm sweep with blades, frame and louvers completeincluding making/ cutting of hole in wall of any thickness and making good to disturbed surface complete incl plastering all as specified and directed. 191 Supply and fixing in replacement FRLS PVCinsulated unsheathedmulti stranded copper conductor of size 1.5 Sqmm single core in existing pipe complete all as specified and directed. 192 Fixing only serviceable tube light fittings any type and any description retrieved under item Srl No. 01, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 0.50 sqmm, 3 core, 1100 volts grade completeall as directed. 193 M & L Service connectionof4 Sq mm twin core Weather proof aluminium conductor cable suspended with No 8 SWG GI wire from Pole to service bracket & then to meter/DB complete with provn of porcelain insulators complete. 194 Hanging of ceiling fan of any sweep duly minor repair work such as replacement of capacitor, flexible wire and rubber reel etc complete all as specified and directed. 195 Taking down Geyser of any capacity or model after disconnecting all water supply and electric connections complete all as specified and directed. 196 Painting of geyser ( as per existing colour) by spraying with two coat of synthetic enamelled paint after cleaning all dust etc, after preparation of surface cleaning of inner tank and minor repair work and re-fixing with new fastner including water and eletrical connection complete all as specified and directed. 197 M&Lfor PVC connections for water heaters with pvc flexible pipe 15mm dia 450 mm long, suitable for hot water size with 02 Nos connectors and washers complete. 198 M& L for XLPE insulated, PVC sheathed galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with strandedaluminium conductor of size 25 sqmm 4 core complete laid in trenches passing through pipes/culverts/ under roades/ alon wallall as specified and directed by Engineer-in-charge. 199 Excavation in trenches in soft/Loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed by Engineer-in -Charge. 200 Returning and filling in, including spreading and levelling, water and well remming in layers not exc. 25cm all as specified and directed. 201 Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed. 202 Supply and laying old size sub class B bricks laid flat in trenchs over the cable with the length of brick perpendicular to the direction of cable length, compressive strength of brick shall not be less than 160 kg/cm² adjacent/abutting each other complete all as specified and directed by Engineer-in-Charge. 203 Material and labour Sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and as directed. 204 M&L for GI tube light grade 50mm bore laid in trenches or fixed on wall/floor for protection of UG cable complete all as specified and directed.
Contract Date: Sep 02, 2024 Contract Value : ₹ 49.18 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Punjab View Result →
24.
Defence #3685968 AOC
Tender For Special Repair To Bldg. No. P-106 Of Mh, Jrc Under Ge ( East ) Jalandhar Cantt ( Tender Id No 2023_Mes_631425_1 ) ; 1 Dismantling Of Brick Tiles Single Layer As In Roof Covering All As Specified 2 Demolition Of Mud In Roofs Any Thickness All As Specified. 3 Material And Labour For Wire Brushing And Cleaning Top Surface Of Cement Concrete, Including Flashing And Junction Of Parapets Etc. Complete All As Specified And Directed 4 Material And Labour For Brushing Neat Cement Slurry With 3 Kg Of Cement Per Sqm Complete All As Specified And Directed 5 Material And Labour For Cement Concrete 1:2:4 Type B-0 Using 12.5Mm Graded Stone Aggregate As In Roof Padding, Laid To Slopes, Surface Finished Even And Smooth Without Using Extra Cement Average Thickness Of Concrete 50Mm Complete All As Specified And Directed 6 Material And Labour For Applying A Coat Of Hot Blown Paving Industrial Bitumen 85 / 25 At The Rate Of 1.20Kg / Sqm Over A Coat Of Primer @0.3 Litre Per Sqm Over The Roof Surface Including Cleaning Surfaces Complete All As Specified And Directed 7 Material And Labour For App Based Polymeric Membrane Minimum Weighing 3.4Kg / Sqm And Minimum 3Mm Thick Reinforced With Polyster Non Wove Fabric ( Wt Not Less Than 150 Gms / Sqm ) Land On Primed Surface By Forced Application Complete All As Specified 8 Material And Labour For 40Mm Thick Tiles Are Laid On Bedded In Cement Mortar ( 1:6 ) 15Mm Thick And Joints Grouted Flush In Cement Mortar 1:3 Mixed With 5% Crude Oil By Weight Of Cement Complete All As Specified And Directed 9 All As Per Srl Item No 08.00 Here-In-Before But Except Tiles 10 Material And Labour For Flush Pointing To Brick Roof Tiles Including Of Joint In Cement Mortar 1:3 Complete All As Specified 11 Material And Labour For Cement Concrete 1:2:4 Type B-0 Using 12.5Mm Graded Stone Aggregate As In Roof Kerbs Pcc As In Kerbs / Covet Fillet Complete All As Specified 12 Demolition Of Cement Concrete Any Description In Any Position Not Otherwise Specifically Provided For Complete All As Specified And Directed 13 Material And Labour For Cement Concrete 1:5:10 Type E-2 ( Using 40 Mm Graded Brickaggregate ) As In Sunken Flooring Complete All As Specified And Directed 14 Water Proofing Treatment To Sunken Floors Of Kitchen, Toilets, Laboratories, Bath And Wcs Etc Shall Be As Under:- ( I ) The Top Surface Of The Sunken Rcc Slab Shall Be Laid With Cross Slope As Indicated In Drgs Towards The Spouts. The Min Thickness Of The Rcc Slab Shall Be As Specified In Drg. ( Ii ) Pcc 1:1.5:3 Fillets At Corners With 12.5Mm Graded Aggregate Shall Be Provided. ( Iii ) Plastering In Cm ( 1:3 ) 15Mm Thick With Wpc On Walls As Well As On Sunken Floor Finished Even And Smooth Using Extra Cement. ( Iv ) Gi Pipe 40Mm Dia Medium Grade Be Inserted At The End Of Lateral Slope Projecting At Least 15Cm Beyond The Outer Most Projected Part Of The Building Below The Drain Pipe Upto Two Storey Construction And 25Cm Beyond Two Storey Construction. ( V ) After Doing The Plaster, Testing Be Carried Out By Ponding ( For 72 Hrs ) The Sunken Portion Before Further Treatment To The Sunken Slabs. Any Leakage / Seepage Observed Shall Be Rectified Before Carrying Out Water Proofing Treatment. ( Vi ) Two Component Acrylic Modiied Cementitious Coating:- 15 ( Aa ) The Surfaces To Be Applied Shall Be Completely Dry And Free From Containments Such As Dirt, Dust, Oil, Surface Treatments And Old Coatings. Concrete Substrates Must Be Mechanically Prepared Using Abrasive Blast Cleaning Or Milling To Remove Cementlaitance, Existing Coating And Achieve A Gripping Profile That Is Clean, Dry And Free From Laitance And Dry Other Form Of Surface Contamination. The Installation Instructions In ManufactureS Published Literature Should Be Strictly Complied With, Including But Not Limited To The Following:- ( Bb ) Chipping Out Any Visible Cracks In V-Groove Pattern As Applicable. Special Attention On This Part. Cleaning Of Cracks & Then Filling Those Cracks With Sika Latex Sbr 100 Putty / Dr Fixit 302 Sbr Latex / Perma Latex Sbr / Fosroc Nitabond Sbr Latex / Asian Paint Latex As Required. Final Cleaning Of Surface With Power Grinder, Wire Brush, Hair Brush & Vacuum Pressure If Required. ( Cc ) Dampen All Surfaces Immediately Ahed Of Application Of Acrylic Modified Cementitious Coating Of Sika Top Seal-107 / Brush Bond Fosroc / Dr Fixit / Stp / Cico. ( Dd ) Whilst The Surface Is Still Damp From Saturation ( S.S.D ) , Apply One Coat Of Acrylic Modified Cementitious Coating Of Sika Top Seal-107 / Brush Bond Fosroc / Dr Fixit / Stp / Cico Of Viscosity As Per ManufacturerS Instructions. ( Ee ) Apply Glass Fabric Sheet Of Sika Fab 1 / Fosroc / Dr Fixit / Stp Whilst The First Coat Is Wet. 16 ( Ff ) Once Touch Dry, Apply Second Coat Of Acrylic Modified Cementitious Coating Of Sika Top Seal -107 / Brush Bond Fosroc / Dr Fixit / Stp / Cico Of Viscosity As Per ManufacturerS Instructions On The Entire Area. ( Gg ) Second Coat Shall Be Applied After 6-8 Hrs Of Application Of Previous Coat And In The Direction Right Angle To The Previous Coat. ( Hh ) The Waterproofing Coating Should Be Taken To A Height Minimum 300Mm Above The Finished Floor Level On The Vertical Surfaces. ( Jj ) It Is Essential To Cure Acrylic Modified Cementitious Coating Immediately After Application ( Minimum 6-8Hrs Drying ) For A Minimum Of 3 To 5 Days To Ensure Full Cement Hydration And To Minimize Cracking. ( Kk ) A Protection Plaster 12-15Mm Thick ) In Cm 1:3 Admixed With Appropriate Integral Water Proofing Compound Has To Be Applied On The Walls. Admixture: Sika Plastocrete Plus / Fosroc / Dr Fixit / Stp / Cico Conforming To Is 2645. 17 Providing And Applying A Protection Screed Of 50Mm Thick 1:4, Cement Sand Mortar Admixed With Sika Plastocrete Over The Applied Water Proofing Coating On Horizontal Surfaces. Admixture: Sika Plastocrete Plus / Fosroc / Dr Fixit / Stp / Cico Conforming To Is 2645. ( Ll ) All The Corners And Joints Should Be Pretreated With An Elastic Waterproofing Sealing Tape With A Woven Bonding Mesh On Each Surface And An Elastic Expansions Zone In The Centre Of Make Sika Seal Tape / Fosroc / Dr Fixit / Stp. ( Mm ) The Membrane Has To Be Protected In Accordance With The ManufacturerS Recommendations Until Placement Of Concrete. The Membrane To Be Inspected For Damage Just Prior To Concrete Placement And Make Repairs In Accordance With ManufacturerS Recommendations. ( Nn ) Waterproofing Treatment Has To Be Carried Out Through Applicators Authorised By The Respective ManufacturerS And Approved By Ge. ( Vii ) All The Joints Of Pipes And Traps Within The Sunken Portion Shall Be Sealed Properly By Epoxy Sealent. ( Viii ) All Ci Traps In Sunken Slab To Be Enclosed With Pcc 1:1.5:3 ( Min15cm ) All Around. 18 Material And Labour For Gi Pipe 50Mm Dia Medium Grade As In Spout Fixed At Bottom At Sunken Slab Complete All As Specified And Directed 19 Taking Down Of Cement Plaster On Brick Wall Of Any Description Thickness Including Racking Out Joints, Hacking For Key Scrubbing Down With Water And Prepared To Receive Plaster Complete All As Specified 20 Material And Labour For 5Mm Thick Cement Plaster In Cement Mortar 1:3 As On Ceiling, Soffits Of Rcc Shelves, Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 21 Material And Labour For 15Mm Thick Rendering In Cement Mortar ( 1:4 ) On Brick Work Or Concrete Surfaces Finished Fair And Even Complete All Specified And Directed. 22 Material And Labour For Rendering 12 Mm Thick In Cement Mortar 1:6 On Fair Faces Of Brick Walls Or On Concrete Surfaces, Finished Even And Smooth, Without Using Extra Cement Complete All As Specified And As Directed 23 Material And Labour For 15Mm Thick Plaster In Cm 1:3Two Layers, First Layer Of 10Mm Thick Plaster In Cement Mortar 1:4 & Second Layer Of 5Mm Thick In Cement Mortar 1:3 As In Chajjas, Beam Balcony Fins, Parapet, Projectionsetc With Dubbing Out Average On Irregular Face Of Walls Top Layer Of Plaster Finished Even & Smooth Without Using Extra Cement Complete Including Cleaning And Preparation Of Existing Rcc Surfaces And Applying A Coat Of Cement Slurry Complete All As Specified And Directed 24 Material And Labour For Preparation Of Newly Plastered Surfaces And Applying Three Coat Of White Wash On Ceiling All As Specified 25 Material And Labour For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Primer Complete All As Specified 26 Material And Labour For Preparation Of Newly Plastered Surfaces Of Walls And Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) Complete All As Specified And Directed 27 Material And Labour For Preparation Of Old Surfaces And Applying One Coats Of White Wash On Plastered Surfaces Of Ceiling Complete All As Specified 28 Material And Labour For Complete Removal Of Existing Finishof Walls And Preparation Of Surface Including Applying 1Mm Thick Wall Care Putty On Wall And Applying Two Coat Of Oil Bound Distemper Over A Coat Of Primer All As Specified 29 Material And Labour For Complete Removal Of Existing Finishof Walls And Preparation Of Surface Of Walls With Acrylic Smooth Exterior Paint Of Required Shade Over Two Coats Of Exterior Primer Complete All As Specified And Directed 30 Dismantling Floor Hearth Or Wall Tiling / China Mosaic Including Cement Mortar Bedding ( But Not Backing ) , Removing Serviceable Tiles To Store Andrubbish Off The Premises Complete All As Specified 31 Material And Labour For Non-Skid Coloured Ceramic Tiles7 To 8Mm Thick Square / Rectangular Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm As In Floor Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Pigment To Match, Laid Over And Including 15Mm Thick Cement Screed Bed In Cement Mortar 1:6 Complete All As Specified And Directed 32 Material And Labour For Glazed Ceramic Coloured Tiles ( Premium Quality ) In Vertical Surface Such As Skirting / Dado Etc Of Size 450 X 300 X 7Mm Thick Set And Jointed In Cement Slurry And Pointed In White Or Colour Cement To Match The Tiles Over And Including 10Mm Thick Plaster In Cm 1:4 To Receive The Tiles Complete All As Specified And Directed 33 Material And Labour For Vitrified Ceramic Tiles Light Shed 10Mm Thick ( Square / Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Laid Over And Including 15Mm Thick Cement Screed Bedding Layer In Cement Mortar 1:6Complete All As Specified And Directed 34 Material And Labour For Vitrified Ceramic Tiles Light Shed 10Mm Thick ( For Vertical Surfaces ) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In Whiteor Coloured Cement To Match Laid Over Including 10Mm Thick Screed Bedding Layer In Cement Mortar 1:4 Walls, Finished Even And Rough To Receive The Top Layercomplete All As Specified 35 Material And Labour For 18-22Mm Thick Machine Cut Kota Stoneflooring Laid Andjointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Laid Over 20Mm Thick Bedding Layer In Cement Mortar 1:6 Including Rubbing And Polishing Complete All As Specified 36 Material And Labour For 18-22Mm Thick Machine Cut Kota Stone As In Vertical Surfaces Risers Of Steps, Skirting, Dado And Pillars Etc Set And Jointed In Neat Cement Slurry And Pointed With Grey Cement Mixed With Pigment To Match The Colour Of Stone Slab Laid Over And Including 10Mm Thick Rendering In Cement Mortar 1:4 Including Rubbing And Mirror Polishing Complete All As Specified 37 Demolition Of Cement Concrete In Ground Floor And Paving Not Exc 15Cm Thickness ( Below Or Above Ground Level ) All As Specified. 38 Material And Labour For 75Mmthickpcc 1:3:6Type B-1 As In Plinth Protection Finished Surface Even And Smooth With Using Extra Cementcomplete All As Specified And Directed 39 Material And Labour For 75Mm Thick Pcc ( 1:4:8 ) Type D-2 Using 40Mm Graded Stone Aggregate As In Sub Base, Sub Floor Of Flooring, Paving, Path Etc Surfaces Finished Rough To Receive Top Layer Complete All As Specified And Directed 40 Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Complete All As Specified And Directed 41 Material And Labour For 60Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block And Shape And Size Confirming To Is 15658-2006 Of M-35 Grade With Grey Cement And Pigment Complete All As Specified And Directed 42 Material And Labour For Coloured Cement Concrete Chequered Tiles 300 X 300 X 22Mm Thick With Grey Cement And No Pigment, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match As In Floors Including 15Mm Thick Screed Bed To Floor Finishes In Cm 1:4 Complete All As Specified And Directed 43 Material And Labour For Pcc 1:2:4 Type B-1 ( Using 20 Mm Graded Stone Aggregate ) In Lintels Upto 1.5 Clear Span, Cills, Steps, Seismic And Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Upto 60 Cm In Height, Copings, Kneelers , Apex Stones, Bed Plates, Water Troughs And The Like Including Use Of Formwork ( Straight Or Curved ) , Including Weathering, Slightly Rounded Or Chamfered Angles And Throating, All As Specified And As Directed Note : Reinforcement Where Provided Shall Be Measured And Paid Separately. 44 Taking Down Chowkhats Or Frameswith Shutter ( Without Taking Off Shutters Form The Frames ) Area Not Exc 1.5 Sqm Each And Removal To Storecomplete All As Specified And Directed. 45 Taking Down Chowkhats Or Frameswith Shutter ( Without Taking Off Shutters Form The Frames ) Areaexc 1.5 Sqm But N.Exc 4.0 Sqm Each And Removal To Storecomplete All As Specified And Directed 46 Refixing Of Shutters Of Any Description Exc 1.0 Sqm But N.Exc 2.0 Sqm Each, In Same Opening Including Taking Down All As Specified And As Directed 47 Supply And Fixing Pressed Steel Door Frame Of Size 105Mm X 60Mm With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate Etc Complete All As Specified And Directed. 48 Supply And Fixing Pressed Steel Frames For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete, As Specified, Supplied And Fixed Size 125 X 60Mm Complete All As Specified And Directed 49 Material And Labour For Pcc 1:3:6 Type C-1 Using 20Mm Graded Stone Aggregate As In Filling Of Pressed Steel Door Frame Complete All As Specified And Directed 50 Supply And Fixing Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain, Colour Pvc Sheet Reinforced With Ms Square Tube, Supplying And Fixing Opening As Per Specification And Drawing 51 Supply And Fixing 30Mm Factory Made Solid Panel Pvc Door Shutter Consisting Of Frame Made Out Of Ms Tube For Top And Bottom Rail, Ms Frame Shall Be Covered With Heat Moulded Plain Colour Pvc “C” Channel Having Strip Of 20 Mm Width Stuck Inside With Solvent Cement Rail On Either Side And As Gap Inset For Top Rail And Bottom Rail, Welded / Sealed To The Stiles And Rails With Suitable Pvc Sheet Beading And Joined Together With Solvent Cement Supply And Fixing In The Frame And Site As Specification All As Specified. 52 Supply And Fixing 100Mm Sizemild Steel Butt Hinges, Isi Marked, Medium Weight, Cold Rolled And Fixed With Screws / Welded To Frame Complete All As Specified And Directed 53 Supply And Fixing 75Mm But Hinges Extruded Aluminium Alloy With Mild Steel Hinge Pin Anodized And Fixed For Pvc Doors Complete All As Specified And Directed 54 Supply And Fixing 30Mm Continuous ( Piano ) Hinges, Mild Steel, Bright Finish Or Electro Galvanised Al As Specified And Directed 55 Supply And Fixing Aluminum Anodised Barrel Tower Bolt 125 Mm Long Of Extructed Section Complete All As Specified And Directed 56 Supply And Fixing Aluminum Anodised Handle Cast Type 125 Mm, Anodised Complete All As Specified And Directed 57 Supply And Fixing 35Mm Thick 2Nd Class Hard Wood Glazed Or Skelton Shutter Factory Made Open Rebated Prepared To Receive Glass, Gauge Etc Without Sash Bars Edges Of Framing Plain Fitted With Cut And Metered Beads For Securing Glass Etc Size Of Member All As Per Clause 8.23 ( A ) Of Ssr Part-I Complete All As Specified And Directed 58 Supply And Fixing 300Mm Long Mild Steel Ordinary Rat Tail Rod Pattern Springs, Including Roller And Roller Plate Complete All As Specified And Directed 59 Supply And Fixing 35Mm Thick 2Nd Class Hard Wood Plain Framed Factory Made Paneled Shutters With Panel Of 9 Mm Bwp Commercial Veneering On Both Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is :1003 ( Part-I ) Kiln Seasoned And Chemically Treated Complete All As Specified 60 Supply And Fixing Steel Window 1.25 Mm Thick Box Type ( Primer Coated ) Erw Hollow P Section Of Size 60Mm X 25Mm Single Rebated Comprises Glazed Skeleton Shutter Erw Sec 50Mmx20mmand 1Mm Thick With Two Openable Leaf Consisting Two Nos Sash Bars Of T-Section 20Mm X 3Mm Complete Welded To Frame With One Vertical Mulion Of Erw Box Type T-Section Of Size 60Mmx25mm And 1.25Mm Thick Including Cutting Holes And Making Good Dismantled Portion Pcc ( 1:2:4 ) Type B-1 Four Nos For Each Window ) Including Following Fittings Welded To Frame Shutter :- ( A ) Hold Fast, 150Mm Long Of 12Mm X 3Mm Made To Shape-04 Nos Per Window. ( B ) Handle Of Z Section 20Mm X 25Mm, 100Mm Long 01 Nos Per Leaf ( C ) Ms Tower Bolt 150Mm Long-2 Nos Per Leaf ( D ) Z Section 20Mm X 25Mm, 100Mm Long Stopper - 01 No Per Leaf ( F ) Ms Box Type Hinges Of Size 75Mm X 12Mm- 2 Nos Per Leaf ( G ) Fabrication & Fixing Arrangement As Per Drg No Cejz / Td-06 / 07.Note: Glass Pans And Painting Shall Be Measured & Paid Separately Under Respective Item Of Schedule 61 All As Per Srl Item No. 57.00 Here-In-Before But Window With Glazing Bars But Without Sash Bars. Note Wire Gauge And Painted Shall Be Measured And Paid Separately Under Respective Item Of Schedule 62 All As Per Srl Item No. 57.00 Here-In-Before But As In Ventilators 63 Material And Labour For Framed Work Such As Grills, Gratings Etc With Ends Of Bars Shouldered And / Or Riveted, Framed Guard Bars, Barred Iron Doors, Ladders, Framed Balusters, Walk Ways Railings And Similar Work Conforming To Fe-290, Gde-E-165, Complete All As Specified And Directed 64 Supply And Fixing Galvanized Mild Steel Wire Cloth 0.63Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm Complete All As Specified And Directed 65 Supply And Fixing 3Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N.Exc 0.5 Sqm Each Panes Complete All As Specified 66 Supply And Fixing 3Mm Thick Figured Glass Pinhead Type In Squares N.Exc 0.5 Sqm Each Pane Complete All As Specified And Directed 67 Cutting Holes In Brick Wallsexc Half Brick But N.Exc On Brick Built In Cement Mortar For Inserting Hold Fast And Making Good Dismantled Portion In Cement Mortar 1:3 Or Cement Concrete 1:2:4 Type B-1 As Required Complete All As Specified And Directed 68 Material And Labour For Treating Small Article Such As Stops, Covers, Gully, Gratings And Hold Fast Ends & Post Backs Of Chowkhat Etc Tarred Area N.Exc 0.10 Sqm Each Complete All As Specified And Directed 69 Supply And Fixing Aluminum Alloys Anodised Sliding Door Bolt With Hasp, Staples 300Mm ( Bolt Type ) And Fixing Clip Of Sheet Cast Or Extructed Sectionand Fixing Bolt And Sliding Bolt Of Extructed Section Or Cast Aluminum Alloys And Fixed Complete All As Specified And Directed 70 Supply And Fixing 200Mm Long Aluminium Anodized Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed. 71 Supply And Fixing Aluminum Anodised Handle Fabricated Type 150Mm, Anodised Complete All As Specified And Directed 72 Material And Labour For 18 / 19Mm Thick In Repair Block Board Grade 2, Interior Grade , Decorative Type With Decorative Face Veneers On One Faces Fixed With Screw To Timber / Steel Frame Work As In Cupboard Partition, Shelves Etc All As Specified 73 Material And Labour For Preparation Of Newly Wooden Surfaces Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And As Directed 74 Material And Labour For Preparation Of Newly Steel Surfaces Of Any Description Over 10Cm Width Or Girth And Applying Twocoats Of Synthetic Enamel Paint Complete All As Specified And Directed 75 Material And Labour For Preparation Of Old Wooden Surfaces Of Any Description Over 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And As Directed. 76 Material And Labour For Preparation Of Old Steel Surfaces Of Any Description Over 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. 77 Demolition Of Brick Work Built In Cement Mortar Including All Quoins, Arches, Pillars Etc Complete All As Specified And Directed.. 78 Material And Labour For Brick Work With Fly Ash Brick, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cm 1:6Complete All As Specified And Directed 79 Material And Labour For Brick Work With Fly Ash Bricks Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls With Old Size Bricks Built In Cement Mortar 1:4Complete All As Specified And As Directed 80 Material And Labour For 25Mm Dia Stainless Steel Pipe Curtain Rod Fixed With & Includingss Powder Coated Hooks / Brackets , Shade As Approved By Ge Complete All As Specified Including Fixing Of Long Size Rawl Plugs In Wall Complete All As Specified 81 Supply Only Finials For Curtain Rod As Approved By Ge Complete All As Specified And Directed. 82 Taking Down Old Gi Tubing And Connection Including Fittings 15Mm Bore Pipe Complete All As Specified And As Directed. 83 Supply And Fixing 15Mm Bore Galvanized Iron Tubing Medium Grade With All Fittings, Fixed To Walls, Ceiling Or Laid In Floors, Complete All As Specified And Directed. 84 Taking Down Old Gi Tubing And Connection Including Fittings20mm Bore Pipe Complete All As Specified And As Directed. 85 Supply And Fixing 20Mm Bore Galvanized Iron Tubing Medium Grade With All Fittings, Fixed To Walls, Ceiling Or Laid In Floors, Complete All As Specified And Directed. 86 Supply And Fixing In Repairs Stop Valve / Angle Valve Fancy Type Cast Copper Alloy Chromium Plated Screwed Down High Pressure Withcapstan Heads Screwed Both Ends For Iron Pipe Or For Union And Fixed 15Mm Bore Complete All As Specified And Directed 87 Supply And Fixing In Repairs Stop Valve Cast Copper Alloychromium Plated With Long Shank And Cup ( Concealed Type ) Screwed Down High Pressure With Capstan Headedscrewed Both Ends For Iron Pipe Or For Union And Fixed 15Mm Borecomplete All As Specified And Directed 88 Supply And Fixing In Repairs 15Mm Bore Bib Tap Cast Copper Alloy, Chromium Plated, Long Body Fancy Type With Capstan Headed, Screwed Down, Screwed For Iron Pipe In Repairs Complete All As Specified And Directed 89 Supply And Fixing In Repairs Whb Mixer Chromium Plated Brass, Size 15Mm Bore Screwed Down High Pressure With Lettered Hot And Cold With Long Screwed Shanks And Fly Nuts Screwed For Iron Pipecomplete All As Specified Anddirected 90 Supply And Fixing In Repairs Fancy Type Wall Mixture Of Brass, Chromium Plated, 3 In 1 System With Hot And Cold Arrangement, With Provision For Both Hand Shower & Overhead Shower With & Including Handshower ( Health Faucet ) Abs Body Including 8Mm Dia Flexible Tube 1M Long & Wall Hook Complete All As Specified 91 Supply And Fixing Chromium Plated Health Faucetfor Ewc With 1M Long Cp Tube With Cp Wall Hook Superior Quality Complete All As Specified 92 Supply And Fixingcp Jet Spray With Holder For Ewc 1.5Mtr Long Complete All As Specified & Directed 93 Supply And Fixing In Repairs Vitreous China Wash Down Water Closet White With Concealed S-Trap / P-Trap, 360Mm Wide, 390Mm High And 415 To 445Mm Long At Topincluding Fixing Bolt Plastic Water Closet Seat Cover White Closed Pattern With Flat Bottom And Cover And Mild Steel Chromium Plated Hinging Device Fixed Complete All As Specified And Directed 94 Supply And Fixing In Repairs Pvc 10 Litre Symphonic Action Type Flushing Cistern, Low Level With Inlet, Ball Valve, Float And Handle ( Isi Marked ) Including Brackets, Flush Pipe Pvc 32Mm Bore And Connection To Wc Complete All As Specified And Directed 95 Supply And Fixing In Repairs Vitreous China Wash Hand Basin, White, Flat Back, Size 550Mm X 400Mm Including Brass Coupling, Mild Steel Brackets Fixed To Wall, Complete All As Specified And Directed 96 Supply And Fixing Pvc Connection 450Mm Long, 15Mm Size With Ptmt Nuts Complete All As Specified 97 Supply And Fixing In Repairs Bevelled Edge Looking Mirror Of Selected Quality Glass, 5.5Mm Thick Of Size 450 X 600Mm, Pvc Moulded Case Mounting On 6Mm Thick Ac Building Board Or Commercial Ply Wood On Back And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers, Fixed In Repairs, Complete All As Specified And Directed 98 Supply And Fixing In Repairs Chromium Plated Brass Shower Rose, Swivel Type Of Size 150Mm X150mm Fixed To Pipe Complete All As Specified And Directed 99 Supply And Fixing In Repairs Toilet Cabinet Made Out Of White Acrylic Sheet 1.50Mm Thick Of Size 450 X 300 X 90Mm With Looking Mirror 450 X 270Mm Fixed On The Shutter And With Suitable Shelving Arrangement In Replacement Of Existing Wooden Cabinet / Mirror And Repairing The Disturbed Surface To Match With Existing Complete All As Specified 100 Supply And Fixing Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guards And Railing 60Cm Long Complete All As Specified. 101 Supply And Fixing Soap Dish, Stainless Steel Approx Size 160Mm X 160Mm X 90Mm Complete All As Specified And Directed. 102 Supply And Fixing Brass Chromium Plated Tubular 20Mm Dia D Type Towel Rail 600Mm Long Complete All As Specified And Directed. 103 Supply And Fixing Chromium Plated Grating 125Mm Dia Circular Of Approved Make And Fixing With Cement Mortar 1:3 On Nahani Trap Or Floor Trap Complete All As Specified And Directed. 104 Supply And Fixing In Repair Glass Corner Shelf Including Cp Railing, Radius 300Mm Complete All As Specified And Directed 105 Supply And Fixing In Repair Stainless Steel Paper Holder, Fixed With Gutties And Steel Screws On Wall Fixed Complete All As Specified 106 Supply And Fixing In Repair 32Mm Dia Pvc Waste Pipe For Whb Complete All As Specified. 107 Supply And Fixing Low Density Polyethylene ( Hdpe ) 40Mm Pipes Of Pressure Rating 6Kgf / Sqcm Complete All As Specified 108 Dismantling Of Cast Iron Drain Pipe Jointed With Cement Mortar / Lead Joint And Taking Out From Wall / Floor If Reqd 75 / 100Mm Complete All As Specified And Directed 109 Supply And Fixing Cast Iron Sandcast Soil Waste Pipes Of Size 100Mm In Any Lengthwith Or Without Ears, With Cement Joints Fixed To Walls Complete All As Specified 110 All As Per Srl Item No. 106.00 Here-In-Before But As In Floor 111 Supply And Fixing Cast Iron Sandcast Soil Waste Pipes Of Size 75Mm In Any Lengthwith Or Without Ears, With Cement Joints Fixed To Walls Complete All As Specified 112 All As Per Srl Item No. 108.00 Here-In-Before But As In Floor 113 Supply And Fixing Cast Iron Cowls 75Mm Size Complete All As Specified And Directed 114 Supply And Fixed Cast Iron Floor Trap With Grating Including To Waste Pipe In 75Mm Fixed In Cement Concrete 1:2:4 Type B-1 Complete All As Specified And Directed 115 Supply And Fixing 100Mm Ci Bends Rest Complete All As Specified 116 Supply And Fixing 75Mm Ci Bends Withrest Complete All As Specified 117 Supply And Fixing Cast Iron Branch Pipes, Single ( Equal Or Un Equal ) Ordinary Or Inverted ( Spigot Or Socket Type ) Or With Parallel Branches For 100Mm Bore Pipe Fitted With Oval Access Doors Complete All As Specified And Directed 118 Supply And Fixing Cast Iron Branch Pipes, Single ( Equal Or Un Equal ) Ordinary Or Inverted ( Spigot Or Socket Type ) Or With Parallel Branches For 75Mm Bore Pipe Fitted With Oval Access Doors Complete All As Specified And Directed 119 Supply And Fixing Bends ( Any Radius ) , Diminishing Pieces Or Tapers 100Mm Bore Complete All As Specified And Directed 120 Dismantling Of Water Tanks Any Type Of Capacity Exc 250 Ltrs But N.Exc 500 Ltrs And Removing To Store Complete All As Specified And Directed 121 Supply And Fixing 500 Ltr Rotational Moulded Polyethylene Water Storage Tank ( Cylindrical Vertical With Closed Top ) Hoisted And Fixed In Position Any Description Complete All As Specified 122 Supply And Fixing 20Mm Bore Brass Ball Valve High Pressurewith Epoxy Coated Aluminium Rod & High Density Polythene Float Balland Fly Nut Screwed For Iron Pipe Complete All As Specified. 123 Supply And Fixing In Repair 20Mm Bore Stop Valve, Cast Copper Alloy, Screwed Down High Pressure With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions All As Specified And Directed 124 Supply And Fixing Pvc ( Swr ) Pipes 110Mm Bore Single Socketed, In Any Length With Rubber Ring Joints, Laid Inin Floors Complete All As Specified And Directed 125 Supply And Fixing Pvc ( Swr ) Bends Any Radius 110Mm Dia Complete All As Specified And Directed 126 Material And Labour For Reinforced Cement Concrete 1:1.5:3 Using 20Mm Graded Stone Aggregate As In Slabs, Lintels, Beams, In Floors, Roofs, Landing, Balconies, Canopies, And Shelves And The Like Complete All As Specified And Directed 127 Fair Finish Form Work To Sides And Soffits Of Floor Or Roof Beams, Beam Hunching, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Sup-Ports, Overhangs, Etc. Also Splays Between Floors And Beams Etc. Complete All As Specified And Directed. 128 Supply And Fixing Mild Steel Tmt Bars 6Mm To 8Mm Dia And Cut To Length Bent To Shape Required, Including Cranking, Bending And Binding As In Stirrups, Spacers And Binders Etc. With Ms Wire ( Annealed ) Not Less Than 0.9Mm Dia Complete All As Specified And Directed. 129 Taking Down Carefully Existing Point Wiring Of Any Type ( I.E. On Wooden Batten, Surface Conduit, Casing Capping Or Concealed Conduit ) Complete For Light, Fan Socket Or Power Point With Fittings And Fixtures Such As Ceiling Rose, Electric Fittings, Holders, Switches, Sockets Etc Including Accessories Such As Wooden Gutties / Rawal Plug, Screw Etc Includingremoving Materials From Site Keeping Side Serviceable Material Tube Lights In Safe Custody For Reuse At Site, To Taking Unserviceable Materials As Sch Of Credit And Making Good To Disturbed Surface Of Walls, Floors Etc. Complete All As Specified And Directed 130 Material And Labour For Point Wiring With 1.5 Sqmm, Pvc Insulated But Unsheathed, Multi Stranded Copper Conductor Single Core Frlscable, Is-694 Marked, Drawn Throughexisting Non Metallic Rigid Pvc Concealed Conduit Of Any Dia And In And Including Modular Metal Flush Mounting Box Withwhite Cover Plate With Frame Of Suitable Module, Screws And Washers Including 1.5 Sqmm Multi Stranded Copper Conductor Pvc Insulated Frls Cable Green In Colour As Continuous Earth Conductor Connected To Common Earth And Earth Dolly With All Accessories Complete All As Specified And Directed For One Light Point / Fan / Bell Controlled By One Switch Sp One Way. 131 All As Per Srl Item No. 127.00 Here-In-Before But For One Socket Outlet 5 Amps On Independent Board Complete All As Specified 132 All As Per Srl Item No. 127.00 Here-In-Before But For One Socket Outlet 5 Amps On Sameboard Controlled With Other Switch Complete All As Specified 133 All As Per Srl Item No. 127.00 Here-In-Before But With 2.5 Sqmm ( Nominal Area ) Frls Copper Conductor Unsheathed Cable For One 3 Pin 15 Amp Socket On Independent Board Including One 2.5 Sqmm Copper Conductor Multi Stranded Green Colour Pvc Insulated Unsheathedfrls Cable 1100 Volts Grade As Earth Wire Connected To Common Earth And Earth Dolly With All Accessories Complete All As Specified And Directed By Engineer-In-Charge. 134 Material And Labour For Point Wiring With 4 Sqmm, Pvc Insulated But Unsheathed, Multi Stranded Copper Conductor Single Core Frlscable, Is-694 Marked, Drawn Through In And Including Non Metallic Rigid Pvc Concealed Conduit Of Suitable Dia, Screws And Washers Including 4 Sqmm Multi Stranded Copper Conductor Pvc Insulated Frls Cable Green In Colour As Continuous Earth Conductor Connected To Common Earth And Earth Dolly With All Accessories Complete All As Specified And Directed For Ac Point Controlled By One Mcb Sp One Way. 135 Supply And Fixing Whitemodular Switch 6 Amp One Way One Module Complete All As Specified And Directed 136 Supply And Fixing Whitemodular Switch 16 Ampwith Indicator Complete All As Specified And Directed 137 Supply And Fixing White Modular Bell Push Switch 6 Ampwith Indicator Complete All As Specified And Directed 138 Supply And Fixing Whitemodular Socket 6 Amp 250 V Ac, 2In1 Socket With Shutter Combined Two Module Complete All As Specified And Directed 139 Supply And Fixing Whitemodular Socket 6 / 16 Amp 250 V Ac, Twin Socket Combined Two Module Complete All As Specified And Directed 140 Supply And Fixing Whitemodular Fan Regulator, Step Type, 5 Steps, Two Module Complete All As Specified And Directed 141 Supply And Fixing In Replacement For Ceiling Rose Surface Type Bakelite 65 X 50 Mm Three Terminal Complete All As Specified. 142 Supply And Fixing In Replacement Bell Electric Ac ( Ding Dong ) 240 Volt Sp Complete All As Specified 143 Material And Labour For Submain Wiring With Two Run Of Single Core Frls, Pvc Insulated Unsheathedmultistranded Copper Conductor Cable Of Size 6 Sqmm Drawn Through In Existing Pvc Rigid Non Metallic Concealed Conduit Including One Run Of Earth Continuity Frls Pvc Insulated Unsheathed Multistranded Copper Conductor Cableof Size 6 Sqmm With Green Insulationincluding Taking Down Old Submain Wiring And Making Good Disturbed Surface Of Walls, Floors Etc.Complete All As Specified. 144 Material And Labour For Submain Wiring With Four Run Of Single Core Frls, Pvc Insulated Unsheathedmultistranded Copper Conductor Cable Of Size 16 Sqmm Drawn Through In Existing Pvc Rigid Non Metallic Concealed Conduit Including Two Run Of Earth Continuity Frls Pvc Insulated Unsheathed Multistranded Copper Conductor Cableof Size 16 Sqmm With Green Insulationincluding Taking Down Old Submain Wiring And Making Good Disturbed Surface Of Walls, Floors Etc.Complete All As Specified. 145 Supply And Fixingin Repairs Pvc Rigid Non Metallic Concealed Conduitmedium Grade Isi Mark 25Mm Dia Including Cutting Chases Making Good In Cement Mortar 1:3 Finishing, And Conduit Accessories Such As Tee, Elbow , Bend Junction Box Complete For Drawing Telephone Cable / Tv Cable / Camera Cable / Pvc Copper Wires All As Specified 146 Supply And Fixingin Repairs Pvc Rigid Non Metallic Concealed Conduitmedium Grade Isi Mark 20Mm Dia Including Cutting Chases Making Good In Cement Mortar 1:3 Finishing, And Conduit Accessories Such As Tee, Elbow , Bend Junction Box Complete For Drawing Telephone Cable / Tv Cable / Camera Cable / Pvc Copper Wires All As Specified 147 Supply And Fixing Distribution Board, Vertical Type, Double Door With Ip-43 Ik -09 Protection Suitable For Mccb Tpn As Incommer And Mcb Sp / Tp As Outgoing 415 Volts 3 Phase 50 C / S 8 Way , Complete With Appropriate Size Copper Bus Bar And Neutral Linkcomplete With One Mccb Fp 415 Volts 160 Amps Rating With Rupturing Cap 16 Ka Of The Same Make As Of Distribution Board & Including Cutting Chases To Wall For Fixing Db And Making Good The Disturbed Wall Surface All As Specified And Directed 148 Supply And Fixing In Repairs / Replacement Sheet Metal Enclosure For Dbs When Mcbs To Be Used, Tpn 8 Ways 415 V, With Suitablerated Bus Bar, Double Door, Epoxy / Powdercoated Inside And Outside Complete All As Specified 149 Supply And Fixing In Repairs / Replacement Sheet Metal Enclosure For Dbs When Mcbs To Be Used, Spn 8 Ways 240 V, With Suitable Rated Bus Bar, Double Door, Epoxy / Powder Coated Inside And Outside Complete All As Specified 150 Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket 240 Volts Complete With One Single Pole Mcb 20 Amps Complete All As Specified And Directed. 151 Material And Labour In Replacement Mcb Sp 5 Amps To 32 Amps, 240V With Rupturing Capacity 10 Ka, B Curve Complete All As Specified 152 Material And Labour In Replacement Mcb Spn 32 Amps, 240V With Rupturing Capacity 10 Ka, B Curvecomplete All As Specified 153 Material And Labour In Replacement Mcb Tpn 63 Amps, 415V With Rupturing Capacity 10 Ka, B Curvecomplete All As Specified 154 Material And Labour In Replacement Mcb Tp 32 Amps, 415V With Rupturing Capacity 10 Ka, B Curve Complete All As Specified 155 Supply And Fixing In Replacement Energy Saving Led Batten With Polycarbonate Diffuser Comprising With Aluminium Housing, 4 Ft, 20W, 6500K, Power Factor More Than 0.95, Ip-20 Class-L Protection With Inbuilt Led Driver, Lumen Efficacy 110 Lm / W Complete All As Specified And Directed 156 Supply And Fixing In Replacement Energy Saving Bulk Head Luminaire With Polycarbonate Diffuser Led Integral Fitting 10 Watt ( Min ) , 6500K, Ip-66, Connecting And Testing, Complete All As Specified And Directed 157 Supply And Fixing In Replacement Energy Saving Led Batten With Polycarbonate Diffuser Comprising With Aluminium Housing, 2 Ft, 10W, 6500K, Power Factor More Than 0.95, Ip-20 Class-L Protection With Inbuilt Led Driver, Lumen Efficacy 110 Lm / W, Complete All As Specified And Directed 158 Supply And Fixing Lamp Holder, Pvc / Polycarbonate Type With Back Plate Suitable For Batten Fittings With And Including Led Lamp 9W Complete All As Specified And Directed. 159 Supply And Fixing In Replacement Energy Saving Pressure Di-Cast Aluminium Luminaire With Heat Resistant Glass And Suitable Optics For Uniform Distribution Of Light 25 Watt Led For Building Security Lights With High Efficiently Electronic Driver, Having Ip-66 Protection, Surge Protection Min 2 Kv Power Factor More Than 0.9 Complete Operative On Ac Supply Pre-Wired And Including Mounting Bracket Of Suitable Size With Clamps, Nuts And Bolts, Connection And Testing Complete All As Specified 160 Fixing Only Serviceable Tube Light Fitting Retrieved From Srl Item No. 125.00 Connecting To Ceiling Rose And Make It Functional Complete All As Specified And Directed. 161 Taking Downceiling Fan From Site And Deposit To Mes Store Yard For Refixing Complete All As Specified And Directed. 162 Fixing Only Ceiling Fan Of Any Sweep Or Make After Collecting From Mes Storeincluding Replacement Of Flexible Wire, Rubber Reel, Nut, Bolts With Lock Nut And Washer And Testing Complete All As Specified And Directed. 163 Material And Labour For Painting Of Ceiling Fans Complete, With Synthetic Enamel Paint By Spraying Including Filling Cavities With Filler, One Coat After Cleaning All Dust, Preparing Of Surface Complete All As Specified And Directed 164 Taking Downgeyser 25 Ltr Cap From Site And Deposit To Mes Store Yard For Refixing Complete All As Specified And Directed. 165 Fixing Only Geyser 25 Ltr Capof Any Size Or Make After Collecting From Mes Store Including Replacement Of Pvc Connectionscompleteall As Specified And Directed. 166 Material And Labour For Painting Of Geyser Complete, With Synthetic Enamel Paint By Spraying Including Filling Cavities With Filler, One Coat After Cleaning All Dust, Preparing Of Surface Complete All As Specified And Directed. 167 Taking Downelectric Kwh Metersingle Phase From Site And Deposit To Mes Store Yard For Refixing Complete All As Specified And Directed. 168 Fixing Only Electric Kwh Meterany Type, Any Make, Any Size, Including Collecting From Mes Store And Making Necessary Connections Complete All As Specified And Directed. 169 Material And Labour For Earthing Complete With & Including Galvanized Ms Earth Plate Of Size600 X 600 X 6 Mm Thick, Buried Vertically In Ground To A Depth Not Less Than 2.25 Metre Below Ground Level, With Top Edge Of Earth Plate Not Less Than 1.5 Below Ground Level Connected To Galvanized Earth Wire 4Mm Dia Connected Soldered And Riveted, Fixed Properlyto Earth Plate By Means Of Nuts, Bolts , Check Nuts & Washers, Of Galvanizediron Or Steel All As Shown In Electrical Plate No. 3 Of Mes Ssr Part- I ( 2009 ) And Connected To Panel Board, All As Specified And Testing On Completion Including Provn Of Earth Wire Protected By 15 Mm Dia Light Grade Gi Pipe Upto 7.5 Meter From Electrode To Earth Terminal Point Feeder Pillar Box Including Earth Plate Surrounded With Adequate Quantity Of Charcoal Dust Mixed With Salt To A Packed Thickness Of Not Less Than 15 Cm In Alternate Layers Of Charcoal And Salt On All Sides Of Earth Plate, Gi Light Grade Watering Pipe Of 20Mm Dia With Funnel With Wire Mesh Including All Necessary Excavation& Earth Work In Any Type Of Soil, Returning Filling In, Removal Of Surplus Soil To A Distance 50 Metre, Pcc 1:3:6Type C-1 As Inearth Chamber, 50 Mm Thick Rcc Cover Using Cement Concrete 1:2:4 Type B-0 Reinforced With & Including 8 Mm Dia Mild Steel Tmt Bar @ 100 Mm C / C Both Way With Suitable Handle For Lifting Arrangement & Including Form Work Complete All As Specified & Shown On Drawings And Testing& Directed.
Contract Date: Feb 21, 2024 Contract Value : ₹ 39.14 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Punjab View Result →
25.
Law and Justice #2167169 AOC
Procurement Of Articles For Dptrc-I & Dptrc-Ii-1.01 Supply And Placement Of As Per Approve As Per Order Godrej Eq Bed With Slated Mattress Base With Headboard & Mosquito Net Rod Overall Size: Width - 2050.0 Mm Depth - 973.0 Mm Height - 720.0 Mm Material : Headboard Panels Are Made Of 18 Mm Thick Prelaminated Particle Board.All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Bed Leg Frame Structure Consist Of Metal Frames Made Of M.S. 50 X 25 Mm Box Section In 1.2 Thickness Internal Pipes Made Of 19 X 19 Mm Box Section In 0.9 Mm Thickness. Headboard Pipes Are Made Of 25 X 25 Mm Box Section In 0.9 Mm Thickness. Mattress Holding Bkt Is Made Of 0.6 Mm Crca Sheet Mattress Frame Sheetmetal Top Is Made Of 1 Mm Crca Sheet Hardware : The High Quality Hardware Used . Construction: Knock Down Construction.Packets: 1 Packet.Finish: 18 Mm Thick Prelaminated Particle Board Is In Make – Godrej ( Shirval ) . Bed Leg Frame Structure Are Powder Coated In Shade : Matt Taupe White. To Thickness Of 50 Microns ( +-10 ) . Mattress Frame Structure Are Powder Coated In Shade : Epp Fr Tex. Milky White _ 20K, To Thickness Of 50 Microns ( +-10 ) . Rest All Metals Are Powder Coated In Shade : S / G Charbrown.To Thickness Of 50 Microns ( +-10 ) .Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.02 Supply And Placement Of As Per Approve As Per Order Godrej Kreation X2 Steel Almirah ( 1 No 450 Mm Main With Door + 1 No 450 Mm Addon With Door ) Comprises Of One Main Unit & 1 Add On Unit With Doors Of Width 450 Mm To Suit Your Requirement. . N Each Individual Unit Comes With 3 Shelves And One Hanging Rod. Kreation Accessory Details N Hinge: Self Closing Hinge Of Hettich Make Door Alignment Can Be Done By Adjusting The Hinge. N Lock: Main Unit: 3 Way Lock Add On Unit: 3 Way Lock Handle: Aluminum Die Cast Handle. Kreation X2, Using Knock-Down Construction, Breaks The Notion That Steel Wardrobes Cannot Be Modular In Nature. Designed With Limited, Concealed Fasteners Allows The User Flexibility To Dismantle And Re-Assemble The The Structure For Easy Shifting And Reconfiguration, Along With Lending Aclean Panel Look. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.03 Supply And Placement Of As Per Approve As Per Order Godrej Mattress Swing 78X 36X4 ; Supply And Placement Of Godrej Make As Per Design Approve As Per Order Mattress Quilted / Nonquilted Quilted Hickness-Mattress 4+ Sandwitch Construction Sandwitch Constructionthickness Mm 50Density Gm / Dcm3 28 Bonded Foam ( Both Side ) Thickness Mm25 Density Gm / Dcm3 90 Pilled Foam – Quilting ( Both Side ) Thickness Mm 10 Pilled Foam Density Gm / Dcm3 18 Total Mattress Thickness Inch 4”+ Tapestry-Gsm Gsm 85 Nature Of Fabric Polyster Pu Foam Thickness Mm 5 Pu Foam Density Kg / M3 18. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.04 Supply And Placement Of As Per Approve As Per Order Godrej Pillow. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.05 Supply And Placement Of As Per Approve As Per Order Godrej Single Bedsheet With Pillow Cover. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.06 Supply And Placement Of As Per Approve As Per Order Godrej Single Conforter. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.07 Supply And Placement Of As Per Approve As Per Order Godrej Chocolat King Bed Overall Size : Length - 2053.0 Mm Width - 1875.0 Mm Height - 1134.0 Mm Material : Bed Structure Consist Of Metal Frames Made Of M.S. 25 Mm Square Pipes In 1.2 Mm Thickness & M.S. Channels In 1.0 Mm Thickness. Partition Panels And Plinths Are Made Of 25 Mm Thick Pre Laminated Particle Board. Head Board And Tail Board Are Made Of 25 Mm Thick P.V.C. Membrane Pressed Mdf. Side Board , Mattress Panels And Drawer Panels Of Bed Are Made Of18 Mm Thick Pre Laminated Particle Board With All The Exposed Edge Sedge Banded With 2 Mm Thick Pvc Edge Banding. Construction : Knock Down Construction. Packets : 1 Bed In 6 Packets. Finish : Pvc Membrane Pressed Mdf Of Head Board And Tail Board Is In Dark Chocolate Finish18 Mm Thick Pre Laminated Particle Board Is In Colarain Shade. Metal Frames Are Powder Coated In Shade Matt Black To The Thickness Of 50 Microns ( +-10 ) . Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.08 Supply And Placement Of As Per Approve As Per Order Godrej Prem. Chocolat Bed Side Table Overall Size : Depth - 450.0 Mm Width - 450.0 Mmheight - 517.0 Mm Material : Top Panel Of 25 Mm And Drawer Fronts Of 18 Mm Pvc Membrane Pressed Mdf. Body And Drawer Panels Are Made Of 18 Mm Thick Prelaminated Particle Board .All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Hardware : The High Quality Hardware Used Like Roller Slides , Hinges , Minifix, Dowels Is Of Make Hettich. Construction : Knock Down Construction. Packets : 1 Packet. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Wenge Realistic Pore. 18 Mm & 25 Mm Pvc Membrane Pressed Mdf Is In Colarain. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.09 Supply And Placement Of As Per Approve As Per Order Godrej Chocolat 2 Door Wardrobe Overall Size : Width — 900.0 Mm - Depth — 600.0 Mm Height — 2013.0 Mm Material - . Body Panels Are Made Of 18 Mm Thick Prelaminated Particle Board All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Doors Are Made Of 18 Mm Thick Is Made Of Prelaminated Particle Board. Body Back Is Made Of 18 Mm Thick Prelaminated Particle Board. Hardware : The High Quality Hardware Used Like Hinges, Wooden Dowels Is Of Make Hettich Construction: Knock Down Construction. Packets: 5 Packets. Finish: 18 Mm Thick Prelaminated Particle Board Is In 4504 Colarain Shade.. Only Lh Door Is Of 18 Mm Pvc Membrane Pressed Mdf Is In Wenge Realistic Pore 180 / 01-1539 Finish.Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.1 Supply And Placement Of As Per Approve As Per Order Godrej Chocolat Prem. Dressing Table With Stool Overall Size : Dressing Table Depth 432.0 Mm Width - 900.0 Mm Height - 1710.0 Mm Dressing Stool – Depth - 320.0 Mm Width - 350.0 Mm Height - 450.0 Mm Material : Panels Of Dressing Table & Stool Are Made Of 18 Mm Thick Pre Laminated Particle Board .All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Top Panel Is Made Of 25 Mm & Door Of Dressing Table Is Made Of 18 Mm P.V.C Membrane Pressed Mdf. Mirror Panel Is Made Of 18 Mm Thick Prelaminated Particle Board With 4Mm Thick Mirror Fixed On To It.Supporting Pipe Used For Fixing The Mirror Frame Is Made Of Ms Square Pipe Of Thickness 1.2 Mm. Stool Seat Is Made Of Foam With Fabric Wrapped On To It. Hardware : The High Quality Hardware Used Like Hinges, Minifix, Dowels Is Of Make Hettich. Construction : Knock Down Construction. Packets : 3 Packets. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Colarain Shade. 25 Mm & 18 Mm Thick Membrane Pressed Mdf Is In Wenge Realistic Pore Shade. Metal Pipe Is Powder Coated In Shade Black To The Thickness Of 50 Microns ( +-10 ) .Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.11 Supply And Placement Of As Per Approve As Per Order Godrej Mattress Swing 78X 72X4 Mattress Quilted / Nonquilted Quilted Hickness-Mattress 4+ Sandwitch Construction Sandwitch Constructionthickness Mm 50Density Gm / Dcm3 28 Bonded Foam ( Both Side ) Thickness Mm25 Density Gm / Dcm3 90 Pilled Foam – Quilting ( Both Side ) Thickness Mm 10 Pilled Foam Density Gm / Dcm3 18 Total Mattress Thickness Inch 4”+ Tapestry-Gsm Gsm 85 Nature Of Fabric Polyster Pu Foam Thickness Mm 5 Pu Foam Density Kg / M3 18. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.12 Supply And Placement Of As Per Approve As Per Order Godrej Double Bedsheet With Pillow Cover. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.13 Supply And Placement Of As Per Approve As Per Order Godrej Double Conforter. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.14 Supply And Placement Of As Per Approve As Per Order Godrej Encardo 1 Seater Sofa Total Length-670.Total Height-850.Total Width-835. Stitching: Thread- Polypropylene. Leather: Pu German Leather Bn 3592. Leg Material: Solid Rubber Wood. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.15 Supply And Placement Of As Per Approve As Per Order Godrej Wish Recta 900X600 Mm With Cpu Trolly & Kbpt Following Specifications. System Offered - Wish; Panel Thickness - 52.4 Mm, Ht. -1050 Mm Approx, Tile Configuration For Panels : Top Tile : Metal Fab, Intermediate Blocks ( 1 No.S ) : Fabric, Bottom Tile : Metal, Mdf Board Thk. - 25Mm; At Height 750Mm & Of Dimensions, Recta-1500 Mm X 600 Mm, Metal Kbpt, Cpu Trolly. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018. 1.16 Supply And Placement Of As Per Approve As Per Order Godrej Glaze Corner Table Table Legs Meterials & Size : Oval Metal Tube Thick 1.5 Mm Color : Silver Power Coating Table Top Materials & Size : ( Density / Type ) L X W X T 600 X 600 X 8 Mm Color : Partial Black Temered Glass Top Full Black Tempered Glass Table Bottom Materials & Size : ( Density / Type ) L X W X T 600 X 600 X 6 Mm Color : Full Black Tempered Glass.Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.17 Ahuja Sound Sysytem With Complete Fittings 1. Speaker Box ( Asc 20T ) :- 6Nos 2. Amplifier ( Ssa 250Dp ) :- 1 Nos 3. Mixer ( Amx- 1412 ) :- 1 Nos 4. Wireless Microphone ( Xr- 40 ) :- 2 Set 5. Awm-700Ul :- 2 Set 6. Abw-400Ul :- 1 Set 7. Mike Cable, Speaker Cable, Speaker Jack 8. Installation & Commissionning Charges 1.18 Supply And Placement Of As Per Approve As Per Order Of Bluestar 60 Ltr Water Purifier Cum Cooler :Blue Star Cooling Capacity: 60 Lph Current: 3.2 A + / - 10 Percent Dimensions: 660X480x1355 Mm Front Panel Material: Ss 304 Max Water Input Pressure: 2.0 Kg / Mm Square Minimum Water Input Pressure: 0.4 Kg / Mm Square Model: Swcsdlx6080uve No Of Cold Water Faucets: 1 No Of Faucets: 2 No Of Filtration Stage: 3 No Of Normal Water Faucets: 1 No Of Purifier Circuit: 2 Number Of Stages For Purification: Sediment Filtration, Carbon Filtration, Uv Filtration Operating Power Supply: 230 + / - 10 Percent V Ac, 50 Hz, 1 Ph Operating Temperature: 15 To 45 Deg C Operating Voltage: 180 To 250 V Power Consumption: 625 W + / - 10 Percent Recommended Max Water Flow: 1.5 Lpm Refrigerant: Type - R134a Side And Back Panel Material: Ss 304 Storage Capacity: 80 Litres Storage Tank Material: Ss 304 Thermal Insulation For Tank: Puf Weight: 65 Kg 1.19 Supply And Placement Of As Per Approve As Per Order Godrej Prosper Pro Chair Seat And Back: Pu Foam In Light Brown Fabric Upholstery Under Structure: Metal Black Powder Coated Under Structure: Metal Black Powder Coated Chairs And Comfort. Suitable For All Kind Of Decors Because Of Its Universal And Versatile Colour Combination Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 1.2 Supply And Placement Of As Per Approve As Per Order Of Following Specifications Godrej Monarch Sofa Upholstery •Material : Pvc •Shade : Burgundy •Thickness : 1 Mm •Weight ( Gsm ) : 575 Frame : •Material : Pine Wood•Moisture Content : 10 -12 % Foam :•Material : Slab Stock •Density : Seat -32 Kg / M3 And 28 Kg / M3 With Recron Filler Back -28 Kg / M3 Webbing : •Material : Nylon •Thickness : 2 Mm Legs :•Material : Pvc With 70 Mm Bush Syn Leather Upholstery Which Is Easy To Clean And Also Adds To The Aesthetic•High Backrest With Engulfs The Entire Body Along With The Shoulder And Head For Enhanced Comfort •Solid Armrest Which Facilitates Ergonomic Body Posture While Seating•Soft Foam With Recron Filler For Comfort And Sinking Feeling •Solid Wood Frame Which Adds To The Rigidity Of The Product•Designer Backrest Which Adds To The Aesthetics •70 Mm Leg Bush Facilitates Effective Floor Management Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018. 1.21 Supply And Fitting Of Window Curtain As Per Cloth Colour Approve With Fittings Of Hanging Rod And Fittings Of Connector. 1.22 Supply And Fitting Of Door Curtain As Per Cloth Colour Approve With Fittings Of Hanging Rod And Fittings Of Connector. 1.23 Park Slide 1.24 Pony Dual Rocker 1.25 Giraffe Dual Rocker 1.26 Elephant Multicolour Rocker 1.27 Fancy Easle Board 1.28 Elephant With Busket Ball 1.29 1X1 10 Mm Number Mats 1.3 1X1 10 Mm Abc Mats 1.31 Roll On Mats 1.32 Soft Dog 1.33 Soft Elephant 1.34 Baby Chair 1.35 Picture Table 1.36 Moon Table 54 1.37 Elephant Ball Pool 6 Pcs 1.38 Balls ( 500 Pcs Bag ) 7 Cm 1.39 Doll House 1.4 Butterly 1.41 Bermuda 1.42 Beam Set 6 Pc 1.43 2X2 Mm Mats ( 20 Mm ) 1.44 Toy Shelf 1.45 R7 Bike 2 Procurement Of Articles For Dptrc-Ii 2.01 Supply And Placement Of As Per Approve As Per Order Godrej Eq Bed With Slated Mattress Base With Headboard & Mosquito Net Rod Overall Size: Width - 2050.0 Mm Depth - 973.0 Mm Height - 720.0 Mm Material : Headboard Panels Are Made Of 18 Mm Thick Prelaminated Particle Board.All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Bed Leg Frame Structure Consist Of Metal Frames Made Of M.S. 50 X 25 Mm Box Section In 1.2 Thickness Internal Pipes Made Of 19 X 19 Mm Box Section In 0.9 Mm Thickness. Headboard Pipes Are Made Of 25 X 25 Mm Box Section In 0.9 Mm Thickness. Mattress Holding Bkt Is Made Of 0.6 Mm Crca Sheet Mattress Frame Sheetmetal Top Is Made Of 1 Mm Crca Sheet Hardware : The High Quality Hardware Used . Construction: Knock Down Construction.Packets: 1 Packet.Finish: 18 Mm Thick Prelaminated Particle Board Is In Make – Godrej ( Shirval ) . Bed Leg Frame Structure Are Powder Coated In Shade : Matt Taupe White. To Thickness Of 50 Microns ( +-10 ) . Mattress Frame Structure Are Powder Coated In Shade : Epp Fr Tex. Milky White _ 20K, To Thickness Of 50 Microns ( +-10 ) . Rest All Metals Are Powder Coated In Shade : S / G Charbrown.To Thickness Of 50 Microns ( +-10 ) .Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.02 Supply And Placement Of As Per Approve As Per Order Godrej Mattress Swing 78X 36X4 ; Supply And Placement Of Godrej Make As Per Design Approve As Per Order Mattress Quilted / Nonquilted Quilted Hickness-Mattress 4+ Sandwitch Construction Sandwitch Constructionthickness Mm 50Density Gm / Dcm3 28 Bonded Foam ( Both Side ) Thickness Mm25 Density Gm / Dcm3 90 Pilled Foam – Quilting ( Both Side ) Thickness Mm 10 Pilled Foam Density Gm / Dcm3 18 Total Mattress Thickness Inch 4”+ Tapestry-Gsm Gsm 85 Nature Of Fabric Polyster Pu Foam Thickness Mm 5 Pu Foam Density Kg / M3 18. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.03 Supply And Placement Of As Per Approve As Per Order Godrej Pillow. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.04 Supply And Placement Of As Per Approve As Per Order Godrej Single Bedsheet With Pillow Cover. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.05 Supply And Placement Of As Per Approve As Per Order Of Following Specifications Godrej Monarch Sofa Upholstery •Material : Pvc •Shade : Burgundy •Thickness : 1 Mm •Weight ( Gsm ) : 575 Frame : •Material : Pine Wood•Moisture Content : 10 -12 % Foam :•Material : Slab Stock •Density : Seat -32 Kg / M3 And 28 Kg / M3 With Recron Filler Back -28 Kg / M3 Webbing : •Material : Nylon •Thickness : 2 Mm Legs :•Material : Pvc With 70 Mm Bush Syn Leather Upholstery Which Is Easy To Clean And Also Adds To The Aesthetic•High Backrest With Engulfs The Entire Body Along With The Shoulder And Head For Enhanced Comfort •Solid Armrest Which Facilitates Ergonomic Body Posture While Seating•Soft Foam With Recron Filler For Comfort And Sinking Feeling •Solid Wood Frame Which Adds To The Rigidity Of The Product•Designer Backrest Which Adds To The Aesthetics •70 Mm Leg Bush Facilitates Effective Floor Management Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018. 2.06 Supply And Placement Of As Per Approve As Per Order Of Bluestar 60 Ltr Water Purifier Cum Cooler :Blue Star Cooling Capacity: 60 Lph Current: 3.2 A + / - 10 Percent Dimensions: 660X480x1355 Mm Front Panel Material: Ss 304 Max Water Input Pressure: 2.0 Kg / Mm Square Minimum Water Input Pressure: 0.4 Kg / Mm Square Model: Swcsdlx6080uve No Of Cold Water Faucets: 1 No Of Faucets: 2 No Of Filtration Stage: 3 No Of Normal Water Faucets: 1 No Of Purifier Circuit: 2 Number Of Stages For Purification: Sediment Filtration, Carbon Filtration, Uv Filtration Operating Power Supply: 230 + / - 10 Percent V Ac, 50 Hz, 1 Ph Operating Temperature: 15 To 45 Deg C Operating Voltage: 180 To 250 V Power Consumption: 625 W + / - 10 Percent Recommended Max Water Flow: 1.5 Lpm Refrigerant: Type - R134a Side And Back Panel Material: Ss 304 Storage Capacity: 80 Litres Storage Tank Material: Ss 304 Thermal Insulation For Tank: Puf Weight: 65 Kg 2.07 Ahuja Sound Sysytem With Complete Fittings 1. Speaker Box ( Asc 20T ) :- 6Nos 2. Amplifier ( Ssa 250Dp ) :- 1 Nos 3. Mixer ( Amx- 1412 ) :- 1 Nos 4. Wireless Microphone ( Xr- 40 ) :- 2 Set 5. Awm-700Ul :- 2 Set 6. Abw-400Ul :- 1 Set 7. Mike Cable, Speaker Cable, Speaker Jack 8. Installation & Commissionning Charges 2.08 Supply And Placement Of As Per Approve As Per Order Godrej Reception Table 2 Arc; Supply And Placement Of Godrej Make Or Equivalent As Per Design Approve As Per Orderreception Table 2 Arc Decorative Laminate Top Overall Size 2410W X 1430 D X 725 Worksurface 1035 Counter Rubber Wood Top Clean Matt Pu Finish 18 Mm Thick Inside Radious - 700 Mm Outside Radious 1350 Mm Depth 650 Mm Corck Rubberized Cork -18 Mmthick .Frosted Glass 10 Mm Thick Diamond Cut Finishing On Edges Inside Radious 1202.5 Mm Outside Radious 1402.5 Depth 200 Mm Note Angel Sustained Within Arc Surface Is 60 Deg . Modesty Panel:- Ms Perforated Sheet Bellow Worksurface : 0.8 Mm ( Thick ) X 665Mm ( Hight ) X 1345Mm ( Flat Length ) Above Worksurface 0.8 Mm Thick X 260 Mm Hight 1345 Mm Flat Hight Legs Ms Tube 1.6Mm Thick Diameter 50.8 Mm Hight 604 Mm Worksurface Decorative Laminated Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018. 2.09 Supply And Placement Of As Per Approve As Per Order Godrej Kreation X2 Steel Almirah ( 1 No 450 Mm Main With Door + 1 No 450 Mm Addon With Door ) Comprises Of One Main Unit & 1 Add On Unit With Doors Of Width 450 Mm To Suit Your Requirement. . N Each Individual Unit Comes With 3 Shelves And One Hanging Rod. Kreation Accessory Details N Hinge: Self Closing Hinge Of Hettich Make Door Alignment Can Be Done By Adjusting The Hinge. N Lock: Main Unit: 3 Way Lock Add On Unit: 3 Way Lock Handle: Aluminum Die Cast Handle. Kreation X2, Using Knock-Down Construction, Breaks The Notion That Steel Wardrobes Cannot Be Modular In Nature. Designed With Limited, Concealed Fasteners Allows The User Flexibility To Dismantle And Re-Assemble The The Structure For Easy Shifting And Reconfiguration, Along With Lending Aclean Panel Look. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.1 Supply And Placement Of Godrej Make As Per Design Approve As Per Order Of Following Specifications Godrej Cantina Table With Ss Top And Ss Stools Table Top The Top Is In Stainless Steel Brushed Finish With Plb Insert For Durability. Easy To Maintain Hygiene. Tubular Frames Made Of 50.8 X 50.8Mm X 1.2Mm Thick Powder Coated Erw Tubes At Base Which Are Welded And Fixed To The Top With Screws. Tubular Stiffeners That Are Provided Between The Two Vertical Frames. The Tubes Are Closed With Plastic Caps. Seats Are Offered In Plastic Shell Seats Or Ss Round Stool Types. Level Adjustors Are Provided To Take Care Of Unevenness In Floor.Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018. 2.11 Supply And Placement Of As Per Approve As Per Order Godrej Single Conforter. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.12 Supply And Placement Of As Per Approve As Per Order Godrej Chocolat King Bed Overall Size : Length - 2053.0 Mm Width - 1875.0 Mm Height - 1134.0 Mm Material : Bed Structure Consist Of Metal Frames Made Of M.S. 25 Mm Square Pipes In 1.2 Mm Thickness & M.S. Channels In 1.0 Mm Thickness. Partition Panels And Plinths Are Made Of 25 Mm Thick Pre Laminated Particle Board. Head Board And Tail Board Are Made Of 25 Mm Thick P.V.C. Membrane Pressed Mdf. Side Board , Mattress Panels And Drawer Panels Of Bed Are Made Of18 Mm Thick Pre Laminated Particle Board With All The Exposed Edge Sedge Banded With 2 Mm Thick Pvc Edge Banding. Construction : Knock Down Construction. Packets : 1 Bed In 6 Packets. Finish : Pvc Membrane Pressed Mdf Of Head Board And Tail Board Is In Dark Chocolate Finish18 Mm Thick Pre Laminated Particle Board Is In Colarain Shade. Metal Frames Are Powder Coated In Shade Matt Black To The Thickness Of 50 Microns ( +-10 ) . Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.13 Supply And Placement Of As Per Approve As Per Order Godrej Chocolat Prem. Bed Side Table Overall Size : Depth - 450.0 Mm Width - 450.0 Mmheight - 517.0 Mm Material : Top Panel Of 25 Mm And Drawer Fronts Of 18 Mm Pvc Membrane Pressed Mdf. Body And Drawer Panels Are Made Of 18 Mm Thick Prelaminated Particle Board .All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Hardware : The High Quality Hardware Used Like Roller Slides , Hinges , Minifix, Dowels Is Of Make Hettich. Construction : Knock Down Construction. Packets : 1 Packet. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Wenge Realistic Pore. 18 Mm & 25 Mm Pvc Membrane Pressed Mdf Is In Colarain. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.14 Supply And Placement Of As Per Approve As Per Order Godrej Chocolat 2 Door Wardrobe Overall Size : Width — 900.0 Mm - Depth — 600.0 Mm Height — 2013.0 Mm Material - . Body Panels Are Made Of 18 Mm Thick Prelaminated Particle Board All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Doors Are Made Of 18 Mm Thick Is Made Of Prelaminated Particle Board. Body Back Is Made Of 18 Mm Thick Prelaminated Particle Board. Hardware : The High Quality Hardware Used Like Hinges, Wooden Dowels Is Of Make Hettich Construction: Knock Down Construction. Packets: 5 Packets. Finish: 18 Mm Thick Prelaminated Particle Board Is In 4504 Colarain Shade.. Only Lh Door Is Of 18 Mm Pvc Membrane Pressed Mdf Is In Wenge Realistic Pore 180 / 01-1539 Finish.Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.15 Supply And Placement Of As Per Approve As Per Order Godrej Chocolat Prem. Dressing Table With Stool Overall Size : Dressing Table Depth 432.0 Mm Width - 900.0 Mm Height - 1710.0 Mm Dressing Stool – Depth - 320.0 Mm Width - 350.0 Mm Height - 450.0 Mm Material : Panels Of Dressing Table & Stool Are Made Of 18 Mm Thick Pre Laminated Particle Board .All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Top Panel Is Made Of 25 Mm & Door Of Dressing Table Is Made Of 18 Mm P.V.C Membrane Pressed Mdf. Mirror Panel Is Made Of 18 Mm Thick Prelaminated Particle Board With 4Mm Thick Mirror Fixed On To It.Supporting Pipe Used For Fixing The Mirror Frame Is Made Of Ms Square Pipe Of Thickness 1.2 Mm. Stool Seat Is Made Of Foam With Fabric Wrapped On To It. Hardware : The High Quality Hardware Used Like Hinges, Minifix, Dowels Is Of Make Hettich. Construction : Knock Down Construction. Packets : 3 Packets. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Colarain Shade. 25 Mm & 18 Mm Thick Membrane Pressed Mdf Is In Wenge Realistic Pore Shade. Metal Pipe Is Powder Coated In Shade Black To The Thickness Of 50 Microns ( +-10 ) .Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.16 Supply And Placement Of As Per Approve As Per Order Godrej Mattress Swing 78X 72X4 Mattress Quilted / Nonquilted Quilted Hickness-Mattress 4+ Sandwitch Construction Sandwitch Constructionthickness Mm 50Density Gm / Dcm3 28 Bonded Foam ( Both Side ) Thickness Mm25 Density Gm / Dcm3 90 Pilled Foam – Quilting ( Both Side ) Thickness Mm 10 Pilled Foam Density Gm / Dcm3 18 Total Mattress Thickness Inch 4”+ Tapestry-Gsm Gsm 85 Nature Of Fabric Polyster Pu Foam Thickness Mm 5 Pu Foam Density Kg / M3 18. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.17 Supply And Placement Of As Per Approve As Per Order Godrej Double Bedsheet With Pillow Cover. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.18 Supply And Placement Of As Per Approve As Per Order Godrej Double Conforter. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.19 Supply And Placement Of As Per Approve As Per Order Godrej Encardo 1 Seater Sofa Total Length-670.Total Height-850.Total Width-835. Stitching: Thread- Polypropylene. Leather: Pu German Leather Bn 3592. Leg Material: Solid Rubber Wood. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.2 Supply And Placement Of As Per Approve As Per Order Godrej Glaze Corner Table Table Legs Meterials & Size : Oval Metal Tube Thick 1.5 Mm Color : Silver Power Coating Table Top Materials & Size : ( Density / Type ) L X W X T 600 X 600 X 8 Mm Color : Partial Black Temered Glass Top Full Black Tempered Glass Table Bottom Materials & Size : ( Density / Type ) L X W X T 600 X 600 X 6 Mm Color : Full Black Tempered Glass.Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018 2.21 Supply And Placement Of As Per Approve As Per Order Godrej Wish Recta 900X600 Mm With Cpu Trolly & Kbpt Following Specifications. System Offered - Wish; Panel Thickness - 52.4 Mm, Ht. -1050 Mm Approx, Tile Configuration For Panels : Top Tile : Metal Fab, Intermediate Blocks ( 1 No.S ) : Fabric, Bottom Tile : Metal, Mdf Board Thk. - 25Mm; At Height 750Mm & Of Dimensions, Recta-1500 Mm X 600 Mm, Metal Kbpt, Cpu Trolly. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018. 2.22 Supply And Placement Of As Per Approve As Per Order Godrej Wish Recta 1500X600 Mm With Cpu Trolly & Kbpt Following Specifications. System Offered - Wish; Panel Thickness - 52.4 Mm, Ht. -1050 Mm Approx, Tile Configuration For Panels : Top Tile : Metal Fab, Intermediate Blocks ( 1 No.S ) : Fabric, Bottom Tile : Metal, Mdf Board Thk. - 25Mm; At Height 750Mm & Of Dimensions, Recta-1500 Mm X 600 Mm, Metal Kbpt, Cpu Trolly. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018. 2.23 Supply And Placement Of As Per Approve As Per Order Godrej Wish Penta 1350X1350 Mm With Cpu Trolly Following Specifications. System Offered - Wish; Panel Thickness - 52.4 Mm, Ht. -1050 Mm Approx, Tile Configuration For Panels : Top Tile : Metal Fab, Intermediate Blocks ( 1 No.S ) : Fabric, Bottom Tile : Metal, Mdf Board Thk. - 25Mm; At Height 750Mm & Of Dimensions, Recta-1500 Mm X 600 Mm, Metal Kbpt, Cpu Trolly. Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018. 2.24 Supply And Placement Of As Per Approve As Per Order Godrej Namaste-Ii Trainings Room Set Of Different Module As Mention ( 1 ) 3 Seater Module- ( I ) 3 Seater With Desk For Front Module-2 Nos ( Ii ) 3 Seater With Seat & Desk For Middle Module- 12 Nos. ( Iii ) 3 Seater With Seat For Rear Module-2 Nos. ( 2 ) 2 Seater Module- ( I ) 2 Seater With Desk For Front Module-1 Nos . ( Ii ) 2 Seater With Seat & Desk For Middle Module- 6 Nos. ( Iii ) 2 Seater With Seat For Rear Module-1 Nosproduct Specifications: A ) Understructure: - Understructure Is Made With Steel Erw Tube Section ( Is:7138 ) Of Size 80X40x2.5Mm Thick With Epoxy Based Powder Coat Finish With Thickness Of 50 Microns ( ±10 ) . - Understructure Consists Of Two Welded Leg Assemblies Connected By Means Of Welded Seat Side Tube Assembly. - Sturdy Anchoring By Anchor Bolts On To Base Of 10Mm Thk Plate For Proper Resting Of Structure. - Plastic Clad & Shoe Main Clad Made Of Glass Filled 30% Nylon-6 For Covering Anchor Bolts. B ) Side Clads: Side Clad Is Made Of 36Mm Thk ( 18+18 Osr Cold Pressed Board ) With 2Mm Thk Pvc Lipping. C ) Desk System: Desk Panel Is Made Up Of 18Mm Thk Plt With 2 Mm Pvc Lipping All Over. Desk Has Depth Of 415Mm With Provision Of Switch Plate Mounting. Desk Is Of Fixed Type. D ) Shelf System: Shelf Panel Is Made Up Of 18Mm Thk Plt With 2 Mm Pvc Lipping All Over. Shelf Has Depth Of 240Mm. Shelf Is Not Provided In Case Of Rear Module. E ) Modesty Panel: Modesty Panel Is Made Up Of 18Mm Thk Plt With 2 Mm Pvc Lipping All Over. Modesty Panel Has Height Of 438Mm. F ) Back Panel: Back Panel Is Made Up Of 18Mm Thk Plt With 2 Mm Pvc Lipping All Over. Back Panel Is Without Cushion. G ) Seat:Seat Understructure Is A Combination Of Welded Fabricated Structure Made Of Ø19x2mm Thk Erw Tube ( Is:7138 ) With Epoxy Based Powder Coat Finish Which Is Covered By 0.8Mm Thk Sheet Metal Cover And Upholstered With Moulded Foam Inside And Leatherite Cover. Seat Can Be Folded Up To Free Up Space By The User I.E. Seat Need To Be Closed By User After Use. H ) Wire Carrier: Wire Carrier Is Made Of 0.8Mm Thk Sheet Metal For Holding Wire Passings. Wires Can Be Only Routed Through The Specified Individual Modules But Can Not Be Passed Through Multiple Modules And The Wirings Is To Be Terminated At Individual Module. I ) Switch Plate: Switch Plate Is Made Of 2Mm Thk Sheet Metal For Switch Plate Mounting Suitable For Anchor Roma Plates. Switch Plate Is Suitable For 6 Modules Anchor Roma Tresa ( Code:30250H ) . Manufacturer Must Have Following Certifications For Eligibilty In This Quotation 1. Iso 50001: 2011 2. Aiota Certificate 3. Greenguard-Voc Certificate. 4. Cii Green Product 5. Iso 45001:2018. 2.25 Supply And Fitting Of Window Curtain As Per Cloth Colour Approve With Fittings Of Hanging Rod And Fittings Of Connector. 2.26 Supply And Fitting Of Door Curtain As Per Cloth Colour Approve With Fittings Of Hanging Rod And Fittings Of Connector. 2.27 Park Slide 2.28 Pony Dual Rocker 2.29 Giraffe Dual Rocker 2.3 Elephant Multicolour Rocker 2.31 Fancy Easle Board 2.32 Elephant With Busket Ball 2.33 1X1 10 Mm Number Mats 2.34 1X1 10 Mm Abc Mats 2.35 Roll On Mats 2.36 Soft Dog 2.37 Soft Elephant 2.38 Baby Chair 2.39 Picture Table 2.4 Supply And Placement Of As Per Approve As Per Order Ply Made Buffet Table Size :- 8X2 With Granite Top On It. And Inner Side Strage Facility To Keep Equipment With Laminate Finished As Per Colour Approve.
Contract Date: Nov 18, 2021 Contract Value : ₹ 3.77 Lakh
Local Bodies No of Bidders 3
West Bengal View Result →
TenderDetail
Loading tenders