View Bid Results For Parameter Test Tenders

We found 1847 Bid Results related to parameter test tenders. You can find Contractor details who won parameter test tenders along with contract details in Bid awards announcements section.

Indian Tenders
59
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
4
Live Opportunities Worldwide
Filters
Stage
1267
305
275
Tender Publishing Platform
265
1582
State / UT
36
364
261
146
133
91
89
88
84
71
64
61
58
45
29
28
26
25
23
21
19
19
17
16
11
11
10
6
6
6
5
4
3
2
2
2
1
Contract Value
811
316
455
245
Publish Date
4
0
0
0
0
Sector
30
445
228
221
221
216
158
101
57
30
26
25
19
15
12
11
9
7
6
6
5
5
5
4
4
3
2
2
1
1
1
Ownership
7
1066
457
185
128
6
2
2
Within keyword
Active filters:
Showing 1–37 of 1847 tenders matching your filters
1.
Educational and Research Institute #11504747 Technical Bid
Tender for Rate Contract For Lab Reagent And Consumable , For Fully Auto Analyser : , Bl.Sugar , Bl.Urea (End Point) , S.Creatinine , S.Uric Acid , S.Bilirubin Total , S.Bilirubin Direct , Total Protein , S.Albumin , Alk.Phosphatase , S.Amylase , S.Cholesterol , S.Hdl , S.Triglycerides , S.Ck-Nac , S.Ck-Mb , S.Ldh , S.Calcium , S.Lipase , Quantitative Crp , S.Phosphorus , Hdl Calibarator , Reagents For Hba1c Test , Calibrator Of Hba1c , Control Of Hba1c , Calibrator Of Ck Mb , Control Of Ck Mb , Control For Biochemistry Test , Elisa Reader Machine , Dengue Ns1 Elisa , Dengue Elisa Igm , Chikungunya Elisa Igm , Coagulometer , Prothrombin Time Reagent , Prothrombin Time Control , Cuvettes For Pt Test Well , Balls For Pt Test , Micro-Serological Kits , Widal Kit , Ra Factor , S.Crp Rapid , Vdrl Card , Hbsag Card (Lateral Flow) , Hbsag Tridot , Dengue Igg Igm & Ns1 Combo Card , Chikungunia Igm Card , Malaria Antigen Card , Anti Hcv Rapid Card , Anti Hcv Tridot , Troponin T(Trop T) , Anti Sera , Anti A Sera , Anti B Sera , Anti D Sera , Coombs Sera , Diagnostic Strips , Pregnancy Card , Combistix(4 Parameter) , Multi Stix(For Urine Analyzer) Sd-720 , Uristix(Alb-Sugar-Ketone) , Glucostrip Code Free , Glucometer Code Free , Stain And Counting Fluid , Leishmans Stain , Semen Counting Fluid , Tri Sodium Citrate 3.8% , N/10 Hcl , Distilled Water , For Blood Bank , Anti Ahg (Coombs Sera) , Anti H (Coombs Sera) , Gel Card (Ahg, Coombs Test Card) , Liss Solution 250Ml Bottle , Anti D Sera (Igg+Igm) Kitt , Hbsag Rapid Test Card , Hiv Repid Test Card , Hiv 1/2 Trisopt Test , Mp Rapid Test Card , Vdrl Repid Test Card , Elisa Test Reagent Kit (Hiv 4Th Generation) , Elisa Test Reagent Kit (Hbsag 4Th Generation) , Elisa Test Reagent Kit (Hcv 4Th Generation) , Cbc 3 Part Machine Print Roll , Glass Test Tube , Hemo-Micro Cuvette , Band Aid , Transpore Tape 1 Size , Blood Bags Single , Blood Bags Container Small , Transfer Bag , Needle Pricker , Liquid Ammonia , Temprature Chart Termopenpole Refigerator , Plastic Droper , Glass Droper , Ecg Paper Roll 12 Channel , Ecg Paper Roll 3 Channel , Ecg Jelly 250Ml , Sonography Jelly 250Ml , Lead Marker (L & R) , Lead Marker (1 & 9) , Vials & Other Consumables , Sugar Vacutainers , Edta Vacutainers , Plain Vacutainers(Cloat Act.) , Pt Vacutainers , Plain Test Tube Without Cap , Plain Test Tube With Screw Cap , Disposable E.S.R Pipate , Vacutainer Needles , Vacutainer Holder , Plastic Urine Containor , Sterile Urine Sample Collection Container , Disposable Tips 5-50Ul Yellow , Fin Tip For Prothrombin Time , Disposable Tips 100-1000 Ul Blue , Priker/ Lencet , Filter Paper , Tissue Paper Roll , Printing Roll For Cbc , Printing Roll 52 Mm , Printing Roll 57 Mm , Printing Roll For Electro Analyzer , Printing Roll Semi Auto Analyser , Barcode Printing Roll , Barcode Cartage Roll , Cover Slip , Capilary Tubes , Micro Glass Slides , Tourniquate , Ppe Kit , V.T.M. For Swine Flu/Covid-19 , Thermocol Box 12 Inch X12 Inch , Culture Swab With Tube , Nutrient Agar Plate , Dropping Bottle 200 Ml. , Small Cup For Serum , Pap Smear Kit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Rajasthan View Result →
2.
Health and Family Welfare #11501392 Technical Bid
Tender for Supply Of Laboratory Disposable, Consumables, Chemicals, Kits For Rrsh, Amravati , Acetic Acid , Ammonium Solution 25 Percent Pure , Fnac Gun , Cedar Wood Oil , Clot Activator Test Tube , Hematology Control , Crp Quantitative Slide Test , Edta Test Tube , Plain Test Tube , Distilled Water , Ria Test Tube , Etda Solution 500Ml , Filter Paper , Glass Slide , Fluoride Tube , Hcl Solution , Hcl Acid Concentrated , LeishmanS Stain , Diluent , Probe Cleaner , Diluent , Lyse-1 , Lyse -2 , Probe Cleaner , Micro Tips Blue. , Microtips Yellow , Special Solvent , Thermal Paper , Tissue Paper Roll , Urine Multystrips Multi Parameter , Uristrips Alb Or Suger , Uristrips Ketone Or Suger , Typhi Sign , Slide Staining Rack , Antisera Abd Kit Bl Group Kit , Media Easy Lyte Daily Cleaner , Turnicat Belt , Urine Multi Strips Multi Parameter , Filter Paper 1X100 Whatsman , Vdrl Or Sphilish Card Rapid , Hbsag Rapid Antigen , Hcv Tridot , Hiv Rapid Test Card , Lence Tissue Paper , Widal Kit Slide Test , Slide Box , Dengue Ns1 , Dengue Igg Igm Combo , Sterile Swab Stick , Hitachi Cup , Albumin Kit , Alkaline Phosphatase Kit , Alanine Amino Transferase Kit Sgpt , Amylase Kit , Apolipoprotein A1 Kit , Apolipoprotein B Kit , Aspartate Amino Transferase Kit Sgot , Iso Propanol , Bilirubin Direct Kit Dsa Ii , Bilirubin Total Kit Dsa Ii , Complement C3 Kit , Complement C4 Kit , Calcium Kit , Creatine Kinase Kit , Creatine Kinase Mb Kit , Creatinine Kit Sox , C-Reactive Protein Kit , Gamma Glutamyltran Sferase Kit , Glucose Kit God Pod , Hydroxybutyrate Dehydrogenase Kit , Hdl Cholesterol Kit , Immunoglobulin A Kit , Immunoglobulin G Kit , Immunoglobulin M Kit , Lactate Dehydrogenase Kit , Ldl-Cholesterol Kit , Lipoprotein A Kit , Magnesium Kit , Phosphorus Kit , Prealbumin Kit , Total Cholesterol Kit , Triglycerides Kit , Total Protein Kit , Uric Acid Kit , Urea Kit , Bicarbonates C And Q Included , Cholinesterase C And Q Included , Fructosamine , Hba1c With Calibrator , Adenosine Deaminase , Antistreptolysin O , Microalbumin , Rheumatoid Factor , Total Protein In Urine Or Csf Tpuc , Unsaturated Iron Binding Capacityc , Ferritin C Mini , Cuvettes , Cd 80 Solution , Multi Sera Calibrator , Multi Sera Calibrator , Lipids Calibrator , Specific Proteins Calibrator , Ck Mb Calibrator , Hba1c Calibrator , Lipoprotein A Calibrator , Myo Calibrator , Rbp Calibrator , Uibc Calibrator , Ige Calibrator , Fer Calibrator , Ace Calibrator , Malb Calibrator , Trf Calibrator , Hb Calibrator , Hba1c Calibrator , Ada Calibrator , Hba1c Control P , Hba1c Control N , Clinchem Multi Control Level 1 , Clinchem Multi Control Level 1 , Clinchem Multi Control Level 1 , Clinchem Multi Control Level 2 , Clinchem Multi Control Level 2 , Clinchem Multi Control Level 2 , Co2 Control N , Fun Control P , D Dimer Control , Multimun Control , Rbp Control , Uibc Control , G6pd Control , Malb Control , Trf Control , Hb Control , Tba Control L , Ada Control L , Ada Control L , Afu Control L And H , Afu Control L And H , Aso Crp Rf Triple Control , Cysc Control , B2 Mg Control , Tpuc Control , Hb Kit With Calibrator And Colume Set , Hba1c Control Kit , Thermal Paper Roll , Reagent Pack For Abg , Daily Cleaner For Abg , Quality Control Abg , Lamp For Fully Biochemistry Analyzer , Lamp For Fully Biochemistry Analyzer , Eosin Staining Solution , Disposable Pap Smear Kit , Electrolyte Sodium Potassium Reagent Pack , Control Quilty , 4 Channel Ise Cleaning Solution - 5421 , Ada Cali , Ada Control , Albumin , Alkaline Phosphatase , Amylase , Bilirubin Direct , Bilirubin Total , Calcium (A) , Cholesterol , Ck Mb , Ck Nac , Control H (Aso/Rf/Crp) , Control L (Aso/Rf/Crp) , Creatinine - Enzymatic , Erba Autowash - System Pack , Fe 125 , Ferritin , Ferritin Calibrator , Ferritin Control Low , Ferritin Control High , Gamma Gt , Glucose ( God - Pod) , Hdl Cholesterol With Calibrator , Ldh - P , Ldl Cholesterol With Calibrator , Lipase Xl , Magnesium , Micro Albumin Control , Micro Albumin With Cal , Microprotein With Cal , Phosphorus , Sgot - El , Sgpt - El , Total Protein , Triglycerides , Uibc 125 , Uric Acid , Xl - Aso - Turbilatex With Calibrator (Ita) , Xl - Autowash Ac/Al Kit , Xl - Multi Cal , Xl - Rf - Turbilatex With Calibrator (Ita) , Xl -Crp - Turbilatex With Calibrator (Ita) , Xl Hba1c With Cali Set , Sample Cup
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Maharashtra View Result →
3.
Railways #11479561 AOC
Supply Of Power Transmission Assembly For Electric Point Machine , Power Transmission Assembly For Electric Point Machine 143Mm Stroke To Descripti On No. D.2118-00-18 Of S&T Workshop, Podanur. Firm Shall Have The Full Fledged Testing Facilities Similar To Testing Bay Of Electric Point M/C To Conduct Tests As Per Irs.S.24 & Irs.S.10 On The Following Parameters. (1) Working Load (2)Time Of Operation (3)Stalling Thrust (4) Slip L Oad (5)Stroke Length Of Drive Rod (6) Locking And Detection Parameters. Ultrasonic Testing To Be Conductedon Drive Rod To Ensure The Material Is Free From Internal Cracks/Defects By The Supplier And For Proof Of This, Test Certificate From Reputed Testing Labs Shall Be Enclosed Al Ong With Each Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]
Contract Date: Jul 04, 2026 Contract Value : ₹ 1.69 Crore
Government Departments No of Bidders 1
Tamil Nadu View Result →
4.
Railways #11461813 AOC
Supply Of Anti -Tracking Varnish For Class B / 130 Degree.Anti -Tracking Varnish For Class B / 130 Degree.,Anti -Tracking Varnish For Class B / 130 Degree As Per Rdso Smi No. Elrs/Smi/200 (Revi Sed) Or As Per Rdso Mpmi No.153/92 Rev 04 Of Sep 2014, For Use In Field Coil And Auxiliary Machines I. E Becktol Red Of M/S. Elantas Beck Co, Pune Or Similar. [The Test Certificate Should Contain Parameters Mentioned In Annexure To Mpmi 153/92 Rev (04) Of Sep 2014] Note: Only Varnished Is Required . Firm Should Quote Only For Varnish. [ Warranty Period: 30 Months After The Date Of Delivery ] ] Amm/Dsd/Ed, Sr Tamil Nadu 1110.00 Kg Amm/Dsd/Ers, Sr Kerala 180.00 Kg Amm/Dsd/Goc, Sr Tamil Nadu 840.00 Kg Amm/Tsd/Tbm, Sr Tamil Nadu 110.00 Kg
Contract Date: Jul 03, 2026 Contract Value : ₹ 14.89 Lakh
Government Departments No of Bidders 1
Tamil Nadu View Result →
5.
Public Administrative Department #11453099 AOC
Procurement Of Telemadicinal Equipments To Urban Wellness Centers In Madhugiri Town Limits - Online Ups Kva With 60 Minutes Battery Backup,Up S Type-3Kva Online Ups On Running Load,Bastery Backup-60 Mimites Or Higher On Running Load,Sony Whult900n/Bzin Bluetooth Headset (Black, On The Ear),The Product Should Provide One Year Warrenty With Good Quality Material Which Includes All Gst,Frieght,Transportation Etc Chages,Study Engineered Wood Office Table (Free Standing, Finish Color - Wenge And White, Knock Down),Primary Material-Engineered Wood,Primary Material Subtype-Particle Board,Study Engineered Wood Office Table,High-Speed, On Internet Via Technologies Like Fiber, Dsl, Cable, Wireless, And Satellite, With Options From Providers Like Jio And Airtel, Providing Various Speed Tiers,Advanced Audio Configuration Presenting A Versatile 4.1 Channel Setup, The Sw-0152 Offers An Enhanced Audio Experience For Your Music, Movies, And Gaming Sessions, Powerful Sound Output Experience A Speaker Output Of 70W,High-Performance Webcam, Full Hd Webcam Is An Excellent Choice. It Allows You To Present Your Work And Your Profile In An Ideal Manner. And, You Can Conveniently Change Its Angle And Talk To Your Coworkers From A Proper Angle,Printer-Recommended Monthly Print-Volume-Recommended Monthly Print Volume,Desktop All In One Core With Processor-X86 Based Processor Intel Core I5 12Th Gen Or Amd Ryzen 5 5000 Series, Hexacore 3.3Ghz. 16 Mb Cache Or Latest Generation,Diagnostic Complete Set With Ophthalmoscope The Primary Toolsets That Any Physician Will Need At The Most Basic Level Are The Diagnostic Sets. These Are Of Utmost Importance To Conduct Any Comprehensive Physical Test. It Generally Contains Tools To Attend To Your Ent Needs, Like A Bent Arm Illuminator, Nasal Speculum,Instant S Glucometer Is A Trusted, Easy-To-Use Blood Glucose Monitoring System Designed For Home Users And Healthcare Facilities. Accu Chek Instant S Exceeds Iso 15197 2013 Standards. With Lcd Display, Single-Button Operation, And Intuitive Target Range Indicator, System Supports Caregivers In Delivering Reliable, Fast, And Confident Glycemic Assessment At Bedside Or Home,The Magna Multi-Parameter Monitor Is An Advanced Medical Device Designed To Monitor And Record Essential Patient Vitals, Including Ecg, Spo2and Nibp.It Features A 7 Color Tft Lcd Screen With Led Backlight,The Waterproof Premium Digital Thermometer (Dmt-4326) Is A High-Precision Thermometer Designed For Quick And Easy Temperature Measurement Across Clinical And Home Settings. Its Waterproof Design Ensures Superior Hygiene And Easy Cleaning, While The Digital Display Provides Fast, Accurate Readings. The Dmt-4326 Is Ideal For Oral, Rectal, And Underarm Use, With A User-Friendly Design That Guarantees Comfort And Reliability,The 3M Littmann Core Digital Stethoscope With A High Polish Matte Mirror Finish Chestpiece And Black Tube (Model 8480) Integrates Cutting-Edge Digital Technology With An Elegant, Professional Design. This Advanced Stethoscope Is Engineered For Precision In Auscultation, Offering A Seamless Blend Of Digital And Acoustic Performance
Contract Date: Ref. Documents Contract Value : ₹ 9.85 Lakh
Local Bodies No of Bidders 1
Karnataka View Result →
6.
Railways #11441271 AOC
Supply Of 10 parameter renal function etc. , 10 parameter renal function test disc. (each box consist of 10 test kit). [ warran ty period: 30 months after the date of delivery ] ]
Contract Date: Jul 02, 2026 Contract Value : ₹ 66,707
Government Departments No of Bidders 1
West Bengal View Result →
7.
Railways #11433807 AOC
Supply Of Electric Overhead Traveling Crane [Eotc]Electric Overhead Traveling Crane [Eotc],The Cost Of Basic Machine As Per Schedule I. Design, Manufacture, Supply, Installation, Testin G And Commissioning Of Electric Overhead Traveling Crane As Per Special Conditions For M&P Procurement P Art I & Part Ii And Parameters Specified In Schedule-I Conforming To Specification No. Special Conditions For M &P Procurement Bid Document-Part Ii Given In Section V. The Crane Shall Be Double Girder As Specified In Sc Hedule-I. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessory Treated As Concomitant Accessory As Per Schedule I. All Required Items For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost T O Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Camc Conditions As Detailed In Special Conditions For M&P Procurement Bid Document-Part Ii. Post Warranty Comprehensive Annual Maintenance Charges (After 2 Year Free Warranty Peri Od) - Firm To Quote Separately For Each Camc Year Ie: Year 1 Tab (For 3Rd Year), Year 2 Tab (For 4Th Year), Year 3 Tab (For 5Th Year),Year 4Th Tab (For 6Th Year), Year 5Th Tab(For 7Th Year). Firm S Hould Quote The Actual Rate Of The Camc In The Bid, Discounted Rate As Per Npv Will Be Generated By The Ireps System For Ranking Purpose. [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Di Scounting: 10 % ] ] At (Location) Cws/C&W/Maq, Sr Karnataka 1.00 Numbers Page 1 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly , Cost Of Spares As Per Schedule-I And Additional Spares And Items As Tendered. All Required Ite Ms For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Maintenance Tools As Per Schedule-I. All Required Items For One Number Of Crane Are T O Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ W Arranty Period: 24 Months After The Date Of Delivery ] ] , The Cost Of Basic Machine As Per Schedule I. Design, Manufacture, Supply, Installation, Testin G And Commissioning Of Electric Overhead Traveling Crane As Per Special Conditions For M&P Procurement P Art I & Part Ii And Parameters Specified In Schedule-I Conforming To Specification No Cofmow/Ir/Eotc/ 2020 , Rev-0. Special Conditions For M&P Procurement Bid Document-Part Ii Given In Section V. The Crane Shall Be Double Girder As Specified In Schedule-I. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessory Treated As Concomitant Accessory As Per Schedule I. All Required Items For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost T O Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Camc Conditions As Detailed In Special Conditions For M&P Procurement Bid Document-Part Ii. Post Warranty Comprehensive Annual Maintenance Charges (After 2 Year Free Warranty Peri Od) - Firm To Quote Separately For Each Camc Year Ie: Year 1 Tab (For 3Rd Year), Year 2 Tab (For 4Th Year), Year 3 Tab (For 5Th Year),Year 4Th Tab (For 6Th Year), Year 5Th Tab(For 7Th Year). Firm S Hould Quote The Actual Rate Of The Camc In The Bid, Discounted Rate As Per Npv Will Be Generated By The Ireps System For Ranking Purpose. [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Di Scounting: 10 % ] ] At (Location) Sse/Cnw/Knkd, Sr Kerala 1.00 Numbers 4 651013820022 Essential Non Stock --- Yes Tpi Agency Inr (2) Spares (Y) Cost Of Spares As Per Schedule-I And Additional Spares And Items As Tendered. All Required Ite Ms For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/Cnw/Knkd, Sr Kerala 1.00 Numbers Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: Inspection Details Process Inspection (100% Of Po Qty ), Stage 3: Final Product Inspection (100% Of Po Qty ) Page 2 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 5 651013820023 Essential Non Stock --- Yes Tpi Agency Inr (2) Spares (Y) Cost Of Maintenance Tools As Per Schedule-I. All Required Items For One Number Of Crane Are T O Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ W Arranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/Cnw/Knkd, Sr Kerala 1.00 Numbers Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: Inspection Details Process Inspection (100% Of Po Qty ), Stage 3: Final Product Inspection (100% Of Po Qty ) 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Completion : Within 400 Days Refer To Para 7 Of Delivery Schedule Chart In Special Conditions For M&P Procurement Bid Document Part - Ii. Payment Terms S.No Description Payment Terms 1 1. 60% Payment: Upon Receipt Of The M&P, Duly Pre-Inspected By A Third-Party Inspection (Tpi) Agency, Receipted At The Site By The Consignee Oï¬Ƒcer In Good Condition And Submission Of A Joint Receipt Note. 2. 20% Intermediate Payment: After Successful Installation And Commissioning And Submission Of A Joint Commissioning Note. 3. Final 20% Payment: After Commissioning Of The M&P At The Consignees End For A Minimum Period Of 30 Days, Upon Submission Of A 10% Warranty Performance Guarantee In The Form Of Bank Guarantee And A Proving Test Certiï¬Cate. Refer To Para 1802 Of Enclosure To The Special Conditions For M&P Procurement Bid Document Part - I. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassiï¬Cation By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 The Contract Shall Be Governed By 1. Irs Conditions Of Contract - Latest Version (Along With All Correction Slips) Uploaded On The Ireps Website And 2. All Other Terms And Conditions Incorporated In The Sr Tender Conditions - Latest Version Uploaded On Ireps Website. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Supply To Be As Per Tender Speciï¬Cation. Normal Applicable To Yes Yes Allowed (Drawing And Specifications Enclosed) All Bidders (Mandatory) Page 3 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 2 The Bidder Should Have Been Complied The Normal Applicable To Yes Yes Allowed Criteria Deï¬Ned In Para 0500 To 0504 I.E. All Bidders (Mandatory) Qualifying Requirement Of Tenderer, As Detailed In Enclosure To The Special Conditions For M&P Procurement Bid Document Part - I. 3 1) Preferably Manufacturers Should Normal Applicable To Yes Yes Allowed Participate. In Case Of ϬRms Other Than All Bidders (Optional) Oems Participating In The Tender, They Must Submit Tender Speciï¬C Authorization From Oem. 2) Oems Can Authorize And Give Tender Speciï¬C Authorization To Its Agent / Dealers To Quote On Their Behalf Provided The Vendor Takes Full Responsibility For The Quality Of The Material Including Warranty Obligation And The Inspection Of Product Against Railways Order Is Carried Out At The Manufacturers Premises.Please Refer Para 3.4 Of Part-B Of Southern Railway Tender Conditions Attached With This Tender. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Furnished The Statement Of Normal Applicable To No No Not Allowed Deviations.[Preferably Nil] All Bidders 2 Have You Quoted Delivery Period Correctly Normal Applicable To No No Not Allowed And Precisely. - All Bidders 3 Have You Submitted Authenticated Copy Normal Applicable To No No Not Allowed Of The Document Authorizing The Signatory All Bidders To Submit And Commit On Behalf Of Tenderer? . 4 Tenderers To Acknowledge Having Read Normal Applicable To No No Not Allowed And Also Accept The Tender Conditions For All Bidders Electronic Tenders As Available At Southern Railway Stores Tender Conditions Available Under Mentioned Link. 5 Have You Attached Any Performance Normal Applicable To No No Not Allowed Statements With Your OffEr? For Proof Of All Bidders Supply To Other Railways / Production Units Copy Of Purchase Order, Inspection Certiï¬Cate And Receipt Note / Certiï¬Cate Must Be Uploaded. Non-Submission Of Such Vital Documents May Be Taken As Their Not Having Any Such Past Performance. 6 Please Check Our Website Before Normal Applicable To No No Not Allowed Submitting OffEr, Whether Any All Bidders Corrigendum To The Tender Not- Has Been Issued Or Not. Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 1 2.0 Earnest Money Deposit (Emd) For Normal Applicable To Yes Yes Not Allowed Stores Tenders:Emd Is Taken To Prove All Bidders Earnestness Of The OffEr On The Part Of The Tenderers. 2.1 Emd Amount Shall Be Mentioned In All Tenders Irrespective Of The Nature Of Tender As Per The Emd Amount Mentioned In Clause 2.3 Below Or As Decided By The Purchaser Under The Policy. There Shall Be No Exemption From Submission Of Emd For Any Tender Or By Any Tenderer, Subject To Provisions Under Clause 10.4.3 Below, Except Following: - (A) (I) Emd Shall Normally Not Be Called Against Tenders With Estimated Value Upto Rs.25 Lakhs (Including Single Tenders, Global Limited Tenders). (Ii) If Considered Necessary, Authority Competent To Issue Tender May Incorporate The Condition To Call For Emd Even In Such Tenders, On Case To Case Basis. (B) Micro & Small Enterprises (Mses) Registered With Agencies Mentioned At Part B Para 15.1 (I) (C) Other Railways And Government Departments In Terms Of Railway Board%U2019s Letter No. 2004/Rs(G)/779/11 Dated 24.07.2007 (D) Indian Ordinance Factories In Terms Of Railway Board%U2019s Letter No.92/Rss(G)/363/1 Dated 08.04.1993 (E) Psus Owned By Ministry Of Railways And Psus For The Group Of Items That Are Manufactured By Them In Terms Of Railway Board%U2019s Letter No.2003/Rs(G)/779/5 Dated 10.09.2004 (F) Vendors Registered With Railways For The Trade Group Of The Item Tendered (G) Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus/Core Subject To Approval Status Being Valid On The Date Of Tender Closing (H) Vendors Registered With Railway For Supply Of Medicine, Medical Equipments And Consumables Shall Be Exempted From Submission Of Emd For These Items (I) In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued Shall Be Exempted From Submitting Emd. Kvic And Acash Shall Be Exempted From Emd For Items Supplied By Them. 2.2 OffErs Submitted Without Emd Shall Be Summarily Rejected. 2.5 Validity Of Emd: Emd Should Remain Valid For A Period Of 45 Days Beyond The ϬNal Bid Validity Period, Which Should Also Be Extended Whenever Bid Validity Is Extended. No Interest Will Be Allowed On Emd. Page 5 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 2 10.0 Security Deposit (Sd) / Performance Normal Applicable To Yes Yes Not Allowed Security For Stores Contracts :- Sd Is All Bidders Taken Towards Security For Due Fulï¬Llment Of The Contract By The Supplier. Security Deposit (Sd) Shall Be 5 % Of Total Value Of Contract And Shall Be Taken From All Vendors For Contract Value Above Rs. 25 Lakh Subject To The Applicable Exemptions. (A) There Shall Be No Exemption From Submission Of Security Deposit (Sd) For Any Tender Or By Any Tenderer Except Following:- (A) The Store Contract Cases Of Value Upto Rs.25 (Twenty ϬVe) Lakh (B) Other Railways And Government Departments In Terms Of Railway Board%U2019s Letter No. 2004/Rs(G)/779/11 Dated 24.07.2007 (C) Indian Ordinance Factories In Terms Of Railway Board%U2019s Letter No.92/Rss(G)/363/1 Dated 08.04.1993 (D) Psus Owned By Ministry Of Railways And Psus For The Group Of Items That Are Manufactured By Them In Terms Of Railway Board%U2019s Letter No.2003/Rs(G)/779/5 Dated 10.09.2004 (E) In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued Shall Be Exempted From Submitting Sd. Kvic And Acash Shall Be Exempted From Sd For Items Supplied By Them. (F) Vendors Registered With Railways For The Trade Group Of The Item Tendered Shall Be Exempted From Sd For Orders Valued Upto Their Monetary Limit Of Registration. (G) Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus/Core Subject To Approval Status Being Valid On The Date Of Tender Closing (H) Vendors Registered With Railway For Supply Of Medicine, Medical Equipments And Consumables Shall Be Exempted From Submission Of Sd For These Items. Note: Apart From Claiming Damages From Vendors, In Case Of Failure To Comply With The Contractual Obligations, Railways Shall Record Poor Performance Of The Vendors For Taking Suitable Penal Action As Per Extant Instructions. For Complete Details Please Refer 10.0 Part A Of Southern Railway Tender Conditions. 3 10.5 Return Of Security Deposit: -The Sd Normal Applicable To Yes Yes Not Allowed Will Be Refunded To The Supplier After All Bidders Execution Of Contract In All Respects, Against Submissions Of Completion Certiï¬Cate And No Claim Certiï¬Cate Declared By The Consignee Oï¬Ƒcer And Subject To Receipt Of Warranty Performance Guarantee (10% Of Contract Value Towards Warranty Obligations) From The Supplier. 4 1. Goods & Service Tax: Please Refer Part Normal Applicable To Yes No Not Allowed A Para 14.0 Southern Railway Tender All Bidders Conditions. 2. Regarding Mse Purchase Preference Please Refer Clause 15.0 Part B Of Southern Railway Tender Conditions. 3. Preference To Made In India Please Refer Part B Para 16.0 Of Southern Railway Tender Conditions. Page 6 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 5 [A] All The Bidders/Tenderers Should Ensure Normal Applicable To No No Not Allowed That They Are Gst Compliant And Their All Bidders Quoted Tax Structure/Rates Are As Per The Gst Law. Firms Must Indicate Its Gst Registration Number Along With Their Offer. [B] In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Igst/Utgst/Sgst Act, The Railway Shall Deduct The Applicable Gst From His/Their Bills Under Reverse Charge Mechanism (Rcm) And Deposit The Same To The Concerned Tax Authority. [C] The ϬRm Should Indicate The Tariff Code (Hsn Code) For Claiming Gst For The Tendered Item. [D] The OffEr Shall Be Evaluated Based On The Gst Rate As Quoted By Each Bidder And Same Will Be Used For Determining The Inter-Se Ranking. While Submitting OffEr, It Shall Be The Responsibility Of The Bidder To Ensure That They Quote Correct Gst Rate And Hsn Number. [E] It Shall Be The Responsibility Of The Bidders To Quote Correct Hsn Number And Corresponding Gst Rate. The Purchaser Shall Not Be Responsible For Any Misclassiï¬Cation Of Hsn Number Or Incorrect Gst Rate, If Quoted By The Bidder. In Case ϬRm Mis-Classiï¬Es Hsn Code/Gst Rate, Higher Gst, If Any, Due To This Misclassiï¬Cation Shall Be Paid And Borne By The Firm Itself. [F] Wherever, The Successful Bidder Invoices The Goods At Gst Rate Or Hsn Number Which Is DiffErent From That Incorporated In The Purchase Order, Payment Shall Be Made As Per Gst Rate Which Is Lower Of The Gst Rate Incorporated In The Purchase Order Or Billed. [G] Vendor Is Informed That She/He Would Be Required To Adjust Her/His Basic Price To The Extent Required By Higher Tax Bill As Per Invoice To Match The All Inclusive Price As Mentioned In The Purchase Order. [H] Any Amendment To Gst Rate Or Hsn Number In The Contract Shall Be As Per The Contractual Conditions And Statutory Amendments In The Quoted Gst Rate And Hsn Number, Under Svc. [I] Tenderers Should Upload Gst Rate Along With Documentary Evidence, Hsn Code And Full Bank Details Of The ϬRm.Ie Bank Name, Bank Address, Account Number, Ifsc Code & Micr Code Along With The Bid. [J] Firm Should Also Give A Declaration That Any Additional Input Tax Credit Beneï¬T, If Become Available To Supplier, The Same Shall Be Passed On To Purchaser Without Any Undue Delay. Page 7 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 6 (I) In Case Of Mse ϬRm Willing To Claim The Normal Applicable To Yes Yes Not Allowed Beneï¬Ts Under Public Procurement Policy All Bidders (Preference To Mse) Order 2012, The ϬRm Should Upload With Their OffEr, The Proof Of Their Being Mse Registered With The Agency Mentioned In Part B Para 15.0 Of Southern Railway Tender Conditions, Failing Which Such OffErs Will Not Be Liable For Consideration Of Beneï¬Ts (Ii) As Per Gazette Notiï¬Cation No. S.O.4926(E) Dated 18.10.2022 Amending Notiï¬Cation No. S.O.2119(E) Dated 26.06.2020 Circulated Vide Railway Board Letter No. 2020/Rs(G)/363/1 Dated 03.11.2022 Regarding Reclassiï¬Cation Of Enterprises And Udyam Registration, In Case Of An Upward Change In Terms Of Plant And Machinery Or Equipment Or Turnover Or Both, And Consequent Reclassiï¬Cation, An Enterprise Shall Continue To Avail Of All Non-Tax Beneï¬Ts Of The Category It Was In Before The Reclassiï¬Cation, For A Period Of Three Years From The Date Of Such Upward Change. In Such Cases, The Tenderer Claiming Beneï¬Ts Under Mse Category Shall Submit Documentary Evidence O F The Date Of Upgradation To Medium Category Along With OffEr. Such Claims Will Not Be Considered With Out Documentary Evidence (Iii) Tenderers Shall Upload Udyam Registration Detail Showing That The Enterprise Is Owned By Scheduled Castes (Sc)/ Scheduled Tribes (St)/ Women Entrepreneurs To Claim The Beneï¬T Under This Sub Classification. 7 Make In India Preference Policy :- Normal Applicable To Yes Yes Not Allowed Procurement Of The Item Is Restricted To All Bidders Class-I Local Suppliers With Minimum Local Content Of 50% (Class-I Local Supplier As Deï¬Ned In Railway Board Letter No: No.2020/Rs(G)/779/2/Pt.1Dated 25.09.2020) Only And The Vendors Who Do Not Qualify To Be Class-I Local Suppliers (I.E., Non-Local Suppliers Or Class-Ii Local Suppliers With Local Content Less Than 50%) Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class-I Local Supplier For The Tendered Item Participates In The Tender, It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor Please Enter The Percentage Of Local Content In The Material Being OffEred. Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Condition Page 8 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 8 General Damages At The Rate Of 5% Of The Normal Applicable To Yes Yes Not Allowed Defaulted Contract Order Value Will Be All Bidders Levied In Case Of Failure To Supply The Material After Placement Of Purchase Order, Within The Delivery Period. In Case Of Failure To Comply With The Contractual Obligations, Railways Shall Record Poor Performance Of The Vendors For Taking Suitable Penal Action As Per Extant Instructions. Wherever Sd Has Been Exempted Or Not Applicable For Any Reason Or Is Less Than The General Damages As Indicated Above, And The Supplier Fails To Supply Goods As Per Conditions Of Contract, As Amended From Time To Time, Purchaser Have The Right To Levy Damages From The Supplier For Failing To Comply With Contractual Conditions. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 9 Liquidated Damage (L.D): Extension Of Normal Applicable To Yes Yes Not Allowed Delivery Period May Be Considered In All Bidders Deserving Cases Where Genuine Reasons Exist. Such Extensions Of Delivery Period May Be Considered With Liquidated Damages As Per Irs Conditions Of Contract And Denial Clause. Railway Shall Recover From The Contractor As Agreed Liquidated Damages And Not By Way Of Penalty, A Sum Equivalent To 1/2% (Half Percent) Of The Price Of Any Stores (Including Elements Of Taxes, Duties, Freight, Etc) Which The Contractor Has Failed To Deliver Within The Period ϬXed For Delivery In The Contract Or As Extended For Each Week Or Part Of A Week During Which The Delivery Of Such Stores May Be In Arrears Where Delivery Thereof Is Accepted After Expiry Of The Aforesaid Period, Subject To A Maximum Of 10% (Ten Percent) Of The Value Of The Contract Irrespective Of Delays, Unless Otherwise Provided Specifically In The Contract. 10 All Taxes, Freight, Packing, Forwarding & Normal Applicable To No No Not Allowed Other Charges Should Be Quoted In All Bidders Numeric Only @ Financial Tabulation. 11 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 9 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 1 (1) As Per Section 171 Of Gst Act 2017, As Normal Applicable To No No Not Allowed A Remedy Against Anti-Proï¬Teering, Input All Bidders Tax Credit Beneï¬T If Any Accrued Should Be Passed On To The Purchaser As Reduction In Basic Price, Or Else The Following Certificate Should Accompany The Bill: It Is Certiï¬Ed That No Input Tax Credit Beneï¬T Has Accrued On Materials Invoiced/Billed For, That Can Be Passed On To Purchaser. B) Firm Should Submit The Invoice/Bill Clearly Indicating The Appropriate Hsn And Applicable Gst Rate Thereon Duly Supported With Documentary Evidence. C) Firm Should Also Give A Declaration That Any Additional Input Tax Credit Beneï¬T, If Become Available To Supplier, The Same Shall Be Passed On To The Purchaser Without Any Undue Delay (2) All The Bidders/ Tenderers Should Ensure That They Are Gst Compliant And Their Quoted Tax Structure / Rates Are As Per Gst Law. In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Gst/Utgst/ Sgst Act, Railway Shall Deduct The Applicable Gst From His / Their Bills Under Reverse Charge Machanisam (Rcm) And Deposit The Same To The Concerned Tax Authority. (3) - 1.Railway Is Not Bound To Accept / Cancel The Lowest Or Any Tender Or To Assign Any Reason For Doing So And Railway Reserves The Right To Accept / Cancel Any Tender In Respect Of The Whole Or Any Portion Of The Items Specified In The Schedule Annexed (Or Tender Schedule) And The Contractor Shall Be Required To Supply The Same At The Rate Quoted. 2.Vendors May Please Note That Giving Intimation Regarding The Tender In Open Tender Cases Or Giving Limited Tender Enquiry Does Not Guarantee The Suitability Of Offer For Placement Of Purchase Order. Railway Reserve The Right To Place Purchase Order Subject To Fulfillment Of Technical / Commercial Eligibility Conditions/ Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 10 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 1 1) Inspection Is By Appointed Tpi Agency. Normal Applicable To No No Not Allowed There Will Be Three Stages Of Inspection As All Bidders Per Speciï¬Cation And Approved Qap. First Stage - Raw Material Inspection As Per Speciï¬Cation And Approved Qap. Second Stage - In Process Inspection As Per Speciï¬Cation And Approved Qap. Third Stage - Final Product Inspection At Firms Premises As Per Speciï¬Cation And Approved Qap. 2) In Case Of Any Deviation To Inspection, Should Be Clearly Indicated In The Offer. 3) Firm Should Provide Complete Work Address Where Inspection Is To Be Carried Out. 2 The Firm Shall Submit Invoice/Bill Normal Applicable To Yes Yes Not Allowed Clearly Indicating The Appropriate All Bidders Hsn Code And Applicable Gst Rate Thereon Duly Supported With Documentary Evidence. S.Rly. Karnataka Gstn No-29Aaagm0289c1zf 3 Tenderers Shall Conï¬Rm The Following Normal Applicable To Yes Yes Allowed Declaration Failing Which The OffEr Will Be All Bidders (Optional) Ignored. I Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India. I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country, Has Been Registered With The Competent Authority. I Hereby Certify That This Bidder Fulï¬Lls All Requirements In This Regard And Is Eligible To Be Considered. Where Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached. Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 11 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 1 1) Camc : Bidders To Note That This Is A Normal Applicable To No No Not Allowed Composite Tender For Procurement And All Bidders Post Warranty Comprehensive Annual Maintenance Contract I.E. Camc For 05 Years Beyond 2 Years Warranty Period. Bidders Are Required To Quote Charges For Camc For Post Warranty Period Of Camc For 05 Years. 2) Evaluation Of The Offers Is Based On Group Wise And Ranking Of The Offers For Each Group Of Items Shall Be Arrived Based On Cost Of All Items Within The Group Including Camc Charges For 5 Years [Adjusted To Net Present Value] After Warranty Period Of 2 Years As Per Specification. 3) Firm Should Quote Actual Rate Of Camc In Their OffEr While Quoting The Bid. The Npv Will Be Worked Out At A Discounting Rate Of 10%. The System Will Calculate Net Present Value Of Camc Of OffEr Automatically Based On Which Ranking Will Be Done. Calculation Of Npv Is Only For The Purpose Of ϬNancial Evaluation Of OffEr And Determining The Inter-Se Ranking. Payment Of Camc Charges Will, However, Be As Per Actual Annual Camc Charges Accepted In The Tender. No Advance Payment For Camc Charges Shall Be Made. A) Firms To Quote Camc Charges Separately I.E Year 1 Tab (For 3Rd Year), Year 2 Tab (For 4Th Year) , Year 3 Tab (For 5Th Year) Year 4 Tab (For 6Th Year) Year 5 Tab (For 7Th Year). 2 Bank Guarantee For Camc: : Bank Normal Applicable To No No Not Allowed Guarantee For Camc Is As Detailed In Para All Bidders 17.2.8 Of Enclosure To The Special Conditions For M&P Procurement Bid Document Part - Ii. Page 12 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 3 One Of The Essential Principles Of Normal Applicable To No No Not Allowed Purchasing Function Is Selection Of Right All Bidders Source For Supply. This Aspect Has Been Emphasized By Railway Board Through Various Circulars In The Past Rb Lr No. 2022/Rs(G)777/1(E 3382862) New Delhi Dated 07.07.2022 With Sub: Acceptance Of Tender, Consideration Of Performance Of Vendors. Railway Board Letter Dated 11.02.2016 Interalia Stipulates Due Consideration Of Dis-Satisfactory Past Performance Of Vendors While Deciding Tender To Ensure Timely Supply Of Material In Required Quantity To Meet The Needs Of Operation, Maintenance, Safety, Etc. Of The Railways. With Complete Digitization Of Supply Chain, Suï¬Ƒcient Data Is Available On Ireps/Imms ReflEcting Various Aspects Of Performance Of Suppliers For Individual Contract, Supplier And Item. Warranty Failures And Response Of Vendors To Such Failures Is One Of The Important Parameters Of Performance Of A Vendor. Suitable Means May Be Adopted To Capture Warranty Performance Of The Vendors. It Is Again Emphasized That Performance Of Vendors, Including Warranty Failures And Response, Would Invariably Be Considered While Deciding The Tenders. 4 Tenderers Are Advised To Check Our Normal Applicable To No No Not Allowed Website Before/After Submitting Their OffEr All Bidders Whether Any Corrigendum To The Tender Has Been Issued Or Not. 5 Past Performance By Way Of Complied Pos Normal Applicable To No No Not Allowed Or R/Notes Or Inspection Certiï¬Cates From All Bidders Railways / Production Units Or Other Govt. Departments If Any To Be Uploaded With E- Bid. 6 The Supplier Must Be Responsible To Normal Applicable To No No Not Allowed Replace The Item If It Gets Damaged During All Bidders The Time Of Delivery. 7 (1) Delivery By Road On Door Delivery Normal Applicable To No No Not Allowed Basis. All Bidders (2) Delivery Charges Including Unloading Charges At Destination Are In The Scope Of The Supplier. 8 Consignee Details: Normal Applicable To No No Not Allowed All Bidders 1) Office Of The Senior Section Engineer,Carriage And Wagon, Mangaluru Central Railway Station, Southern Railway, Mangaluru - Karnataka- 575001 Contact Number : 9495559828/ 9731663403 2) Office Of The Sr.Section Engineer , Carriage And Wagon, Manglore Junction , Southern Railway, Karnataka -575007 Contact Number : 9731663409 / 9495559828 Bill Paying Authority: Sr. Divisional Mechanical Engineer Contact Number : 9746763400 Page 13 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 9 Annexure -I : The Tenderers Shall Submit A Normal Applicable To No No Not Allowed Copy Of Certiï¬Cate Stating That All Their All Bidders Statements/Documents Submitted Along With Bid Are True And Factual. Standard Format Of Certiï¬Cate To Be Submitted Along With Bid Are True And Factual. Standard Format Of Certiï¬Cate To Be Submitted By The Bidder Is Enclosed As Annexure -I. Non-Submission Of Above Certificate By The Bidder Shall Result In Summary Rejection Of His/Their Bid. It Shall Be Mandatorily Incumbent Upon The Tenderer To Identify, State And Submit The Supporting Documents Duly Self-Attested/Digitally Signed By Which They/He Is Qualifying The Qualifying Criteria Mentioned In The Tender Document. It Will Not Be Obligatory On The Part Of Tender Committee/Accepting Authority To Scrutinize Beyond The Submitted Document Of Tenderer As Far As His Qualification For The Tender Is Concerned. 10 Deviations: The Tenderer Shall Certify Normal Applicable To No No Not Allowed That The OffEred Stores Fully Meets The All Bidders Speciï¬Cation. Various Design Features Incorporated To Fulï¬Ll DiffErent Technical Performance Requirements Shall Be Fully Explained In The OffEr. However, Minor Deviations From These Speciï¬Cations Which Do Not AffEct Or In Any Way Interfere With The Stipulated Performance Standards Or Would Result In Improved Safety/ Reliability Or Would Reduce Recurring Maintenance/Operating Cost Of The Machine, Can Be Considered For Acceptance Subject To Consignee Oï¬Ƒcer Suitability. The Tenderer In Such Eventuality Shall Clearly Indicate The Details Of These Deviations And Their Implications. 11 In Case Of Delay In Approval Of Gad On Normal Applicable To No No Not Allowed Railway Account, Extension Of Dp As Reï¬X All Bidders Shall Be Dealt With Accordingly. The Design, Manufacture, Supply, Installation, Testing And Commissioning To Be Completed Within The Given Completion Period On Award Of Contract. In Case Supplies Are Required To Be Deferred By Railways Due To Site Conditions Or Any Other Reasons, The Intimation Shall Be Given To All Concerned 15 Days Before The Due Delivery Date To Re-Fix Dp Accordingly. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1) Tenderer Should Submit Para Wise Normal Applicable To Yes Yes Allowed Compliance Of Each Speciï¬Cation All Bidders (Mandatory) Parameter Along With OffEr As Per Attached Specifications And Conditions. 2) Tenderer Should Submit Bill Of Material (Bom) Along With The OffEr Duly Indicating Components And Their OffEred Makes As Per Specification. OffErs Submitted Without The Above Will Be Summarily Rejected Considering As Incomplete Offer. Page 14 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 2 1) OffEred Model, Product Normal Applicable To Yes Yes Allowed Brochure/Literature To Be Uploaded For All Bidders (Mandatory) Evaluation. 2) In Case Of Any Deviation To Speciï¬Cation Like In Terms Of Dimension, Capacity, Size And Etc It Should Be Clearly Indicated In The Offer. 3) Railway Reserves The Right Either To Consider Or Not To Consider OffEred Deviations Based On End User Requirement. 3 Tenderers Should Agree To The Normal Applicable To Yes Yes Not Allowed Guarantee/Warranty As Per Speciï¬Cation All Bidders And In Case Speciï¬Cation Does Not Contain Gc/Wc Then Gc/Wc As Per Irs Conditions Of Contract Will Apply. 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To The 3 Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The Offer 5 And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In The 8 Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After The 9 Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description 1 5538374.Pdf Annexure 1 2 5538377.Pdf Item 651013820010 Drawing 3 5538382.Pdf Item 651013820010 Specification 4 5538384.Pdf Item 651013820010 Speicification Part Ii 5 5538561.Pdf Item 651013820020 Shedule 6 5538544.Pdf Item 651013820020 Drawing 1 7 5538549.Pdf Item 651013820020 Drawing 2 8 5538555.Pdf Item 651013820020 Specification Part 1 9 5538558.Pdf Item 651013820020 Specification Part 2 10 5538432.Pdf Item 651013820010 Schedule The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid Page 15 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Cmm-Adrm-Pgt ( S Jayakrishnan ) , Cost Of Spares As Per Schedule-I And Additional Spares And Items As Tendered. All Required Ite Ms For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Maintenance Tools As Per Schedule-I. All Required Items For One Number Of Crane Are T O Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ W Arranty Period: 24 Months After The Date Of Delivery ] ]
Contract Date: Jul 01, 2026 Contract Value : ₹ 1.26 Crore
Government Departments No of Bidders 1
Karnataka View Result →
8.
Educational and Research Institute #11428129 Technical Bid
Tender for Purchase Of Sim Reader Trainer Kit In Electronics And Communication Department , Purchase Of Sim Reader Trainer Kit In Ece Department , Sim Reader Trainer Kit Power Supply: • Operates On 230 V Ac ±10%, 50 Hz Mains Supply.• Built-In Regulated Smps Power Supply. • Operating Dc Supply: 5 V / 12 V With Overload And Short-Circuit Protection. Sim Card Interface: • Supports Gsm Sim Cards Compatible With 2G / 3G / 4G / 5G Networks. • Sim Card Read/Write Interface.• Supports Sim Card Initialization, Authentication, And Communication Functions. • Compatible With Standard 6-Pin / 8-Pin Sim Card Sockets. Communication Interface: • Usb 2.0 Interface For Pc Communication. • Rs-232 Serial Communication Interface. • Uart Communication Facility For Embedded System Interfacing. Sim Operating Parameters: • Selectable Sim Clock Frequencies:• 3.579 Mhz • 7.159 Mhz • 14.318 Mhz • Sim Supply Voltage Selection Facility. • Sim Reset And Activation Control. Supported Protocols And Standards: • Gsm Etsi 07.07 And Etsi 07.05 At Command Support.• Iso/Iec 7816 Smart Card Communication Support.• Sim Communication Command Monitoring Facility. Hardware Features: • On-Board Sim Card Socket.• Led Indication For:• Power Status • Sim Detection • Reset Activity • Data Transmission/Reception • Built-In Keypad For Standalone Operation. • Lcd Display Module (128 × 64) For Menu And Status Display. • On-Board Microcontroller-Based Control Section. Software Support: • At Command Execution And Monitoring Software. • Sim Manager Utility Software. • Data Logging And Communication Terminal Utility. • Pc-Based Gui Software For Sim Data Communication Experiments. Trainer Features: • Fault Simulation Facility For Troubleshooting Experiments. • Simulation Of Faults Such As: • Sim Not Detected • Clock Failure • Vcc Failure• Reset Failure • Multiple On-Board Test Points For Signal Observation. • Test Points For: •Sim_Rst• Sim_Clk • Sim_Io • Vcc • Uart Tx/Rx • Suitable For Cro/Dso Signal Monitoring.• Glass Epoxy Pcb With Educational Block Diagram Layout. • Compact Tabletop Enclosed Cabinet Design. Construction: • Front Panel With Printed Block Diagram.• Banana Test Points And Patching Facility. Standard Accessories: • Gsm Sim Trainer Unit. • Usb Communication Cable. • Rs-232 Communication Cable. Power Cord.• User Manual.• Utility Software Cd / Downloadable Software Package.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Tamil Nadu View Result →
9.
Health and Family Welfare #11427982 Technical Bid
Tender for E-Tender For Purchase Of Mediciens, Dental Materials, Consumables, Lab Items, Ortho Implants & Other Items For Districit Health Facilities, District Charkhi Dadri. , 5-Fluorouracil Injection 500Mg, 50Mg/Ml Ampule , Acebrophylline 200 Mg Tablet , Aceclofenac Tablet 100 Mg , Acetazolamide Tablet 250 Mg , Acetylcysteine 600Mg Tablet , Acetylcysteine20% W/V, 2Ml Injection , Acetylsalicylic Acid Tablet 150 Mg , Acetylsalicylic Acid Tablet 75 Mg Gastroresistant Entric Coated , Actinomycin Injection 0.5 Mg , Acyclovir Eye Oint 5%,5 Gm , Acyclovir Ointment 3% W/W, 4.5Gm , Acyclovir Tablet 200 Mg , Acyclovir Tablet 400 Mg , Acyclovir Tablet 800 Mg , Adapalene Gel, 0.1%, 15Gm , Adenosine Injection 3 Mg/ Ml, 1Ml annual periodical maintenance , Adrenaline Injection 1 Mg/Ml, 1:1000, 1 Ml annual periodical maintenance , Agomelatine Tab 25 Mg , Albendazole Chewable Tablet 400 Mg , Albendazole Oral Suspension 200 Mg/5 Ml,10 Ml Bottle , Alfacalcidol Soft Gelatin Capsule 0.25 Mcg , Alkalizer Mb6 500Ml (Potassium Citrate Magnisum Citrate Syrup & Vit B6) , Allopurinol Tablet 100 Mg , Alprazolam Tablet 0.25 Mg , Alprazolam Tablet 0.5 Mg , Aluminium Hydroxide + Magnesium Hydroxide + Simethicone Oral Solution 250 Mg+ 250 Mg+ 50 Mg/ 5 Ml, 180 Ml Bottle , Aluminium Hydroxide + Magnesium Hydroxide + Simethicone+ Magnesium Carbonate Chewable Tablet 240 Mg+100 Mg+ 25 Mg + 60 Mg , Amidarone 150 Mg/3 Ml Injection , Amikacin Injection 100Mg, 2 Ml , Amikacin Injection 250Mg, 2 Ml , Amikacin Injection 50 Mg, 2 Ml , Amikacin Injection 500Mg, 2Ml , Amino Acids/Alamin 200 Ml Infusion Iv Minimum 10 Essential Amino Acids , Aminophylline Injection 25 Mg/ Ml, 10 Ml Ampoule , Amiodarone 100 Mg Tablet , Amiodarone 200 Mg Tablet , Amisulpride 100 Mg Tablet , Amisulpride 200 Mg Tablet , Amisulpride 50 Mg Tablet , Amitriptyline Tablet 10 Mg , Amitriptyline Tablet 25 Mg , Amlodipine Tablet 10 Mg , Amlodipine Tablet 5 Mg , Amoxicillin + Clavulanic Acid Injection 1.2 Gm , 10 Ml Vial With Diluents , Amoxicillin + Clavulanic Acid Injection 250 Mg +50 Mg, Vial With Diluents , Amoxicillin + Clavulanic Acid Suspension 200 Mg +28.5 Mg/ 5 Ml, 60 Ml Bottle , Amoxicillin + Pottasium Clavulanate Dispersible Tablet 200 Mg +28.5 Mg , Amoxicillin + Pottasium Clavulanate Tablet 500 Mg + 125 Mg , Amoxicillin Capsule 250 Mg , Amoxicillin Oral Suspension 125 Mg/5 Ml, 60 Ml Bottle , Amphotericin B Powder For Injection 50 Mg And Vial Has Sodium Deoxychlolate Or Liposomal Complex, 10 Ml , Ampicillin Sodium Injection 500Mg/2 Ml Vial With Diluent , Anti Hemophillic Factor Ix Vial Injection Size 500 Iu , Anti Hemophillic Factor Vii Injection 1Mg,Vial/Ampoule , Anti Hemophillic Factor Vii Injection 2Mg,Vial/Ampole , Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 1000 Iu,Vial/Ampoule , Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 500 Iu,Vial/Ampoule , Anti Rabies Immunoglobulin Injection (Human) 150 Iu/Ml, 2Ml Vial , Anti Rabies Immunoglobulin Injection 300Iu/Ml , Anti Rabies Vaccine Human (Cell Culture) Purified Vero Cell Rabies Vaccine 1 Ml Vial, (For Intradermal Use) , Anti Rabies Vaccine Injection 2.5 Iu, Singledose , Anti-Haemorrhoidal Containing: Beclomethasone Dipropionate 0.025% W/W, Phenylephrine Hyderochloride 0.10% W/W, Lignocaine Hydrochloride 2.5% W/W In Soft Paraffin Base 20 Gm Tube , Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 150 Mcg/Vial , Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 300Mcg/Vial , Antisnake Venom ( Dry Powder For Polyvalent Solution) Injection Vial With 10 Ml Diluent , Antisnake Venom (Polyvalent Solution) Injection 10 Ml , Aprepitant 80Mg (Kit Contains 3 Caps) , Aripipralzole Tablet 10 Mg , Aripiprazole Tablet 20 Mg , Aripiprazole Tablet 5 Mg , Arkamin 0.1 Mg Tablet , Artemether (40Mg) + Lumefantrine (240Mg) Tablet , Artemether (80Mg) + Lumefantrine (480Mg) Tablet , Artesunate 100 Mg+Pyrimethamine 37.5 Mg+Sulphadoxin 750 Mg Tab. , Artesunate 50 Mg+Pyrimethamine 25 Mg+Sulphadoxin 500 Mg Tab. , Artesunate 200 Mg+Pyrimethamine 25 Mg+Sulphadoxin 500 Mg Tab. , Artesunate Injection 60 Mg/Ml , Ascorbic Acid Tablet 500 Mg (Vitamin - C) , Ascorbic Acid Tablet 500 Mg + Zinc Sulphate 20Mg , Atenolol Tablet 50 Mg , Ateplase Inj. 20 Mg , Ateplase Inj. 50Mg , Atomoxetine Capsule 10 Mg , Atorvastatin Tablet 10 Mg , Atorvastatin Tablet 20 Mg , Atracurium Besylate Injection 10 Mg/ Ml, 2.5 Ml , Atropine Eye Drops 1% W/V, 5 Ml , Atropine Eye Ointment 1%, 3.5 Gm , Atropine Injection 0.6 Mg/Ml, 1 Ml Ampoule , Azathioprine 25 Mg Tablet , Azithromycin 1Gm Inj. , Azithromycin 500 Mg Inj. , Azithromycin Oral Solution 200 Mg/5 Ml, 15 Ml , Azithromycin Tablet 250 Mg , Azithromycin Tablet 500 Mg , Azitronam 250Mg , B-Complex Tablet , Beclofen Tablet 20 Mg , Benzathine Penicillin Injection (Powder )12 Lacs Iu Vial, 5 Ml , Benzoyl Per Oxide Gel 2.5%, 20 Gm , Benzyl Nicotinate(2 Mg) + Heparin(50 Iu) 20Gm Ointment (Tharomophob Cream) , Betahistine Tablet 8 Mg , Betamethasone Dipropionate Cream 0.1 %, 5 Gm , Betamethasone Injection 4Mg/Ml , Bethanecholchloride Tablet 25 Mg , Bicalutamide Tablet 50 Mg , Biotin Tablet 10 Mg , Biphasic Isophane Insulin (30/70) 40 I.U/Ml, 10 Ml , Bisacodyl Tablet 5 Mg , Bisprolol 5Mg Tablet , Bleomycin Injection 15 Mg, 15 Mg/Ml Vial , Blonanserin Tablet 4 Mg , Bone Marrow Needle For Neonates 18 G , Bortezomib Injection 2 Mg , Breviteracetam Tablet 50 Mg , Bromocriptine Tablet 2.5 Mg , Budesonide (A)+ Formoterol (B) Inhalation (Mdi/Dpi) 200 Mcg (A)+ 6 Mcg (B), 120 Mdi , Budesonide Inhalation (Mdi/Dpi) 200 Mcg/Dose, 200 Mdi , Budesonide Nasal Spray 100 Mcg/Dose, 7.5 Ml , Budesonide Respirator Solution For Use In Nebulizer 1 Mg/ Ml, 2Ml , Budesonide Respules 3%, 4Ml , Bupivacaine Heavy 5 Mg With Dextrose Monohydrate 80 Mg/Ml Injection 4 Ml Ampoule , Bupivacaine Injection 0.5%, 5Ml Amp. , Buprenorphine Tablet 0.4 Mg , Buprenorphine Tablet 2 Mg , Buprenorphine Transdermal Patch 10 Mcg/Hour , Buprenorphine Transdermal Patch 20 Mcg/Hour , Buprinorphine Patch 10 Mg , Buprinorphine Patch 15 Mg , Buprinorphine Patch 5 Mg , Bupropion Tablet 150 Mg , Buspirone 5 Mg Tablet , Butorphanol Tartrate 1Mg/Ml, 1 Ml Injection , Cabergolin 0.25 Mg Tab , Cabergolin 0.50 Mg Tab , Caffeine Citrate 20Mg/Ml Oral Solution , Caffeine Citrate Injection 20 Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml), 3Ml , Calamine Lotion, 100 Ml , Calcium Gluconate Injection 100 Mg/Ml, 10 Ml annual periodical maintenance , Calcium Phosphate Syrup, 200Ml , Calcium Salts 500 Mg+ Vitamin D3 250 Iu Tablet , Calcium Syrup Each 5 Ml Contains Calcium 250Mg, Vitamin D3 125 Iu , Capecitabine Tablet 1000 Mg , Capecitabine Tablet 500 Mg , Carbamazepine Oral Solution 100Mg/5Ml, 30 Ml Bottle , Carbamazepine Tablet 200 Mg , Carbamazepine Tablet 400 Mg , Carbimazole Tablet 5 Mg , Carbimiazole 10 Mg Tablet , Carboplatin Injection 150 Mg, 10 Mg/Ml Vial , Carboplatin Injection 450 Mg, 10Mg/Ml Vial , Carboprost Injection 25 Mg/Ml , 250 Mcg, 1Ml , Carfilzomib Injection 60 Mg , Cariprazine Tablet 1.5 Mg , Carpinol Inj. 0.5% , Carvedilol 3.125 Mg Tablet , Cefadroxil Oral Solution 125 Mg/ 5 Ml, 30 Ml , Cefepime 2 Gm + Tazobactom 250Mg Inj. , Cefixime 100 Mg Tablet , Cefixime Syrup 50 Mg/ 5 Ml, 30 Ml , Cefixime Tablet 200 Mg , Cefoperazone + Sulbactam (1G+1G) Injection , Cefotaxime Injection 1 Gm , Cefotaxime Injection 250 Mg , Cefotaxime Injection 500 Mg , Ceftazidime 1 Gm Injection , Ceftazidime 250Mg , Ceftriaxone + Salbuctam Injection (1Gm + 0.5Gm) , Ceftriaxone Injection 1 G Vial , Ceftriaxone Injection 250 Mg , Cetrimide Solution 20% concrete For Dilution 500Ml , Cetrizine Hydrochloride 10 Mg Tablet , Cetrizine Syrup 5 Mg/5Ml, 60 Ml , Chlordiazepoxide 10 Mg Tablet , Chlordiazepoxide 25 Mg Tablet , Chlorhexidine Mouth Wash Solution 100 Ml, 0.2% W/V , Chlorhexidine Solution 5% concrete For Dilution 5 Ltr , Chlorhexidine Solution 5% concrete For Dilution 500Ml , Chloroquine Phosphate Injection 40 Mg/Ml , Chloroquine Phosphate Oral Solution 50 Mg/ 5 Ml, 50Ml Bottle , Chloroquine Phosphate Tablet 250 Mg Equivalent To 155Mg Chloroquine Base , Chlorpheniramine Tablet 4 Mg , Chlorpromazine (Hydrochloride) Tablet 100 Mg , Chlorthlidone 12.5 Mg Tablet , Chlorthlidone 6.25Mg Tablet , Chymotrypsin+ Trypsin (1:6 ) Tablet 100K Au , Cilnidipine 10Mg Tablet , Cinnarizine Tablet 25 Mg , Ciprofloxacin (0.3% W/V) + Dexamethasone (0.1% W/V) Ear Drops, 10 Ml , Ciprofloxacin Eye Drop 0.3%, 10Ml , Ciprofloxacin Eye Ointment 0.3%, 5 Gm , Ciprofloxacin Injection Iv 2Mg/ Ml, 100 Ml , Ciprofloxacin Tablet 250 Mg , Ciprofloxacin Tablet 500 Mg , Cisplatin Injection 10 Mg , Cisplatin Injection 50 Mg, 1 Mg/Ml Vial , Citicoline Tablet 500 Mg , Clarithromycin 500 Mg Tablet , Clindamycin Gel 1% W/W, 10 Gm , Clinidipine Tablet 10 Mg , Clobazam Capsule 10 Mg , Clobetasol + Gentamycin Ointment 0.05% + 0.1 %, 15 Gm , Clobetasol + Salicylic Acid Cream 20 Gm , Clobetasol Cream 10Gm (0.05%) , Clobetasol+Saliyltic Acid Cream 10Gm , Clobetasone Butyrate + Miconazole Cream , Clofazimine 100 Mg Tablet , Clofazimine 50 Mg Tablet , Clomifene Citrate Tablet 50 Mg , Clonazepam 0.25 Mg Tablet , Clonazepam Tablet 0.5 Mg , Clonazepam Tablet 1 Mg , Clonidine 0.1 Mg Tablet , Clonidine 100Mcg Tab. , Clopidogrel Tablet 75 Mg , Clotrimazole +Beclomethasone 10Gm Cream , Clotrimazole 1% W/V + Lignocaine Hydrochloride 2% W/V Ear Drops, 5Ml , Clotrimazole Cream 2 %, 15Gm , Clotrimazole Ear Drops 1% W/V, 5Ml , Clotrimazole Mouth Paint 1% W/V, 15 Ml , Clotrimazole Pessaries 200 Mg , Clotrimazole200mg + Clindamycin 100 Mg Pessaries , Clotrimazole Powder 75 Gm , Cloxacillin Capsule 500 Mg , Clozapine 100 Mg Tablet , Clozapine 25 Mg Tablet , Clozapine 50 Mg Tablet , Coal Tar Solution 5%, 100Ml , Coconut Oil 100Ml , Codeine Phosphate 10Mg +C.P.M. 4Mg Per 5Ml,100Ml , Colistin Lyophilized Powder 4.5 Million I U Per Vial Injection , Collagen Membrane-Sterile Bioresorbable Gtr Collagen Membrane Isi/Iso/Ce Marked , Colostrum 500Mg Cap. , Combination Of Clinidine Bromide 2.5 Mg +Chlordiazepoxide 5.0 Mg+Dicyclomine 10.0 Mg (Normaxin Equivalent) Tablet , Conjugated Estrogen Tablet 0.625Mg , Cotrimazole 1 % + Betamethasone 0.0025% Lotion 15 Ml , Cotrimoxazole (Sulfamethoxazole + Trimethoprim) Tablet 800 Mg + 160 Mg , Co-Trimoxazole [Sulphamethoxazole (A) + Trimethoprim (B)] Oral Liquid 200 Mg (A) + 40 Mg (B)/5 Ml , Cough Expectorent (Salbutamol+Bromhexine ) Syrup 2 Mg +4 Mg, 100 Ml , Cough Expectorent (Salbutamol+Bromhexine ) Syrup 2 Mg +4 Mg, 60 Ml , Cough Syrup Ambroxol-15 Mg + Terbutaline Sulphate-1.5 Mg + Guaiphenesin-50 Mg/ 5 Ml 100 Ml , Cough Syrup Diphehydramine 14 Mg + Ammonium Chloride 135 Mg + Sodium Citrate 57 Mg + Menthol 0.9 Mg/5 Ml 100 Ml Bottle , Crotamiton Cream 20Gm , Cycloserine 250 Mg. Tablet , Cycloserine 500 Mg. Tablet , Cyclopentolate Hcl Eye Drops 1% W/V , 5Ml , Cyclophosphamide Injection 1000Mg, 1.33Mg/Ml Vial , Cyclophosphamide Injection 500Mg, 10Mg/Ml Vial , Cyclophosphamide Tablet 50 Mg , Cyproheptadine Tablet 4 Mg , Dacarbazine Injection 200 Mg, 10Mg/Ml Vial , Dacarbazine Injection 500 Mg , Daclatasvir 30 Mg Tablet , Daclatasvir 60 Mg Tablet , Darifenacin Tablet 7.5 Mg , Deferasirox Tablet 500 Mg , Deferasirox Tablet 250 Mg , Deferiprone Tablet 500 Mg , Deferoxamine Mesylate 2 Grams Per Injection , Degaralix Injection 240 Mg , Desferrioxamine Injection 500 Mg , Desvenlafaxine Tablet 50 Mg , Dexamethasone 6 Mg Tablet(Covid) 6 Mg , Dexamethasone Injection 4Mg/Ml, 2 Ml Ampoule , Dexamethasone Tablet 0.5 Mg , Dexamethasone Tablet 4 Mg , Dexamethasone Tablet 8 Mg , Diacerein 50 Mg + Glucosamine Sulphate 500 Mg Tablet , Diazepam Injection 5 Mg/Ml, 2 Ml Ampoule , Diclofenac (Sodium) Injection 25 Mg/Ml ,3Ml Amp. , Diclofenac + Paracetamol Tablet 50Mg+325Mg , Diclofenac 50Mg + Chlorzoxazone500mg + Paracetamol 250 Mg Tablet , Diclofenac Gel 1%, 30 Gm Tube , Diclofenac Injection 75 Mg/Ml ,1Ml Amp. (Intravenous) , Diclofenac Sodium Gastro-Resistant Tablet 50 Mg , Diclofenac Supositories 50 Mg , Diclofenac Spray 30Ml , Diclofenac Spray 100Ml , Dicyclomine 10 Mg+Mefenamic Acid 250 Mg Tablet , Dicyclomine 20 Mg+Mefenamic Acid 500 Mg Tablet , Dicyclomine Injection 2 Ml Ampule , Dicyclomine Oral Solution 10Mg/5Ml , Dicyclomine Tablet 10 Mg , Dienogest Tablet 2 Mg , Digestive Enzymes Capsule , Digoxin Tablet 0.25 Mg , Diltiazem Injection 5 Mg/Ml, 5Ml , Diltiazem Tablet 30 Mg , Dinoprostone Gel 0.5 Mg, 3 Gm , Disodium Hydrogen Citrate Oral Solution 1.38 Gm/ 5 Ml, 100 Ml , Distilled Water/Sterile Water 10Ml. , Distilled Water/Sterile Water 5Ml , Disulfiram Tablet 250 Mg , Disulfiram Tablet 500 Mg , Divalproex Sodium Tablet 500 Mg , Dns ( Sodium Chloride And Dextrose, Each 100 Ml Contains Dextrose 5 Gm, Nacl 0.9 G) 500Ml (Ffs Techonology) , Dobutamine Injection 250 Mg/5 Ml , Docitaxel Injection 120 Mg, 20Mg/ 0.5 Ml Vial , Dolutegravir Tablet 50 Mg , Domperidone Oral Solution 1 Mg/ Ml, 30Ml , Domperidone Tablet 10 Mg , Donepezil Injection 10 Mg , Donepezil Tablet 10 Mg , Donepezil Tablet 5 Mg , Dopamine Injection 40 Mg/ Ml In 5Ml Ampoule , Dothiepin Tablet 25 Mg , Dothiepin Tablet 75 Mg , Doxophylline 400 Mg Tablet , Doxorubicin Injection 10 Mg, 10Mg/Ml Vial , Doxorubicin Injection 50 Mg, 10Mg/Ml Vial , Doxycycline Capsules 100 Mg , Doxylamine Tablet 10 Mg , Drotaverine 40 Mg Tablet , Drotaverine 80 Mg + Mefenimic Acid 500 Mg Tablet , Drotaverine Injection 40 Mg/ 2 Ml , Drotaverine Tablet 80 Mg , Duloxetine Capsule 20 Mg , Duloxetine Tablet 30 Mg , Ecg Jelly 200 Ml Bottle , Elemental Iron 60 Mg +Folic Acid 500 Mcg, Sugar Coated And Red Color Tablet , Empagliflozin Tablet 10 Mg , Enema , Enoxaparin 40 Mg Inj. , Enoxaparin 60 Mg Inj. , Entacavir 0.5 Mg Tablet , Entecavir 1 Mg Tablet , Epirubicin Injection 10 Mg, 2Mg/Ml Vial , Epirubicin Injection 50 Mg, 2Mg/Ml Vial , Erlotinib Tablet 100 Mg , Erythromycin Syrup 125 Mg/5 Ml, 60 Ml , Erythromycin Tablet 250 Mg , Erythropoietin Injection 40000 Units/Ml, Single Dose 1 Ml Vial , Escitalopram Tablet 10 Mg , Estrogens Cream 0.625 Mg , Ethambutol Tablet 100 Mg , Ethambutol Tablet 400 Mg , Ethambutol Tablet 800 Mg , Ethamsylate Injection 250 Mg/2 Ml , Ethamsylate Tablet 250 Mg , Ethamsylate Tablet 500 Mg , Ethionamide 250 Mg Tablet , Ethionamide 500 Mg Tablet , Ethinyestradiol Tablet 5 Mcg , Etizolam Tablet 0.50 Mg , Etophylline + Theophylline Injection 169.4 Mg + 56.6 Mg/2 Ml , Etophylline + Theophylline Tablet 231 Mg + 69 Mg (Sr) , Etoposide Capsule 50 Mg , Etoposide Injection 100Mg, 20Mg/Ml Vial , Etoricoxib Tablet 90 Mg , Exemestene Tablet 1 Mg , Favipiravir(Covid) 400 Mg , Febuxostat 40 Mg Tablet , Fentanyl Injection 50 Mcg/Ml, 2Ml Ampoule , Ferrous (Iron Sucrose) Injection 20 Mg/Ml, 5 Ml Amp. , Ferrous Salt + Folic Acid(Ifa Wifs) Tablet(Enteric Coated) Equivalent To 100 Mg Iron + 500 Mcg Folic Acid (Blue) , Ferrous Sulpahte + Folic Acid Syrup 100 Mg + 0.5 Mg/ 5 Ml, 50 Ml Bottle, Ropp Cap Bottle With Inert Liner & Bottle To Be Provided With A Dispenser To Dispense To 1 Ml Each Time And Packed In A Mono Carton , Fevipiravir 200Mg Tablet , Fexofenadine 120 Mg Tablet , Fexofenadine 180 Mg Tablet , Filgrastim Injection 300Mcg, 300Mcg/0.5 Ml Prefilled Syringe , 3 Fdc Tablet (Each Film Cated Tablet Contains Rifampicin 150 Mg+ Isoniazid 75 Mg+ Ethambutol 275 Mg) Fixed Dose Combination For Tb , 4 Fdc Tablet (Each Film Cated Tablet Contains Rifampicin 150 Mg+ Isoniazid 75 Mg+ Ethambutol 275 Mg + Pyrazinamide 400Mg) Fixed Dose Combination For Tb , Flouromethalone 0.1% W/V Eye Drops 5Ml , Fluconazole Capsule/Tablet 150 Mg , Fluconazole Capsule/Tablet 200 Mg , Fluconazole Injection 200 Mg/ 100 Ml , Flunarazine Tablet 10 Mg , Fluoxetine Capsule 20 Mg , Fluphenazine Injection 25 Mg, 1 Ml Ampoule , Flurbiprofen Sod. Eye Drops 0.03%W/V ,10Ml , Fluticasone Cream 0.01%, 10Gm , Fluticasone Furoate Nasal Spray , Fluvoxamine 150 Mg Tablet , Folic Acid Tablet 5Mg , Formaldehyde Solution 400Ml , Formalin Tablet , Formocresol Formalin, Cresol Glycerin ,Formocresol Formalin Bp 20% V/V , Cresol Ip 32% V/V , Glycerin Ip Qs, 20Ml , Framycetin Cream 1%, 30 Gm Tube , Furosemide Injection 10 Mg/Ml, 2Ml Ampoule , Furosemide Tablet 40 Mg , Fusidic Acid Cream 2 %, 10 Gm , Gabapentin + Nortriptyline (400/10Mg) Tablet , Geftinib Tablet 250 Mg , Gemcitabine Injection 200Mg, 100Mg/Ml Vial , Gentamycin Injection 40 Mg/ Ml, 2 Ml Vial , Gentian Violet (Methylrosanilinium Chloride Paint Preparation Aqueous Solution 0.5%W/V), 50 Ml Dark Bottle , Gentian Violet (Methylrosanilinium Chloride Paint Preparation Aqueous Solution 0.5%W/V), 15 Ml Dark Bottle , Glimipride Tablet 1 Mg , Glimipride Tablet 2 Mg , Glucose With Sodium Chloride/Saline Injection 5% Glucose + 0.9% Sodium Chloride, 500Ml (Ffs Technology) , Glucose/Dextrose Injection 10% Isotonic 500 Ml(Ffs Technology) , Glucose/Dextrose Injection 25%, 100 Ml(Ffs Technology) , Glucose/Dextrose Injection 5% Isotonic 500 Ml(Ffs Technology) , Glycerine Trinitrate Injection (Nitro Glycerine) 5 Mg/ Ml , Glyceryl Trinitrate ( Niroglycerine) Injection 5 Mg/Ml, 5 Ml Ampule , Glyceryl Trinitrate (Sublingual) Tablet 500 Micrograms , Glycopyrolate Injection 0.2 Mg/Ml, 1 Ml Ampoule , Glycopyrronium +Formoterol Fumarate Rota Caps , Goserline Injection 10.8 Mg , Granisetron Injection 1 Mg , Granisetron Injection 3 Mg , Griseofulvin Tablet 250 Mg , Haloperidol Injection 5 Mg/ Ml , Haloperidol Injection Long Acting 50 Mg , Haloperidol Tablet 5 Mg , Halothane Inhalation 250 Ml Bottle , Hcg (2000 Iu) Inj. , Hcg (5000 Iu) Inj. , Heparin Injection (5000 Iu/Ml) 5Ml, 1% , Hepatitis B Immunoglobulin Injection 100 Iu/ 1Ml. , Hepatitis B Vaccine (R Dna) I.P. 0.5Ml Inj, 10Mcg/0.5Ml , Hepatitis B Vaccine (R Dna) I.P. 0.5Ml Inj, 5Mcg/0.5Ml , Homatropine Eye Drops 1%, 5Ml , Homatropine Eye Drops 2%, 5Ml , Human Albumin 20% Sol. Ip, 100Ml For I/V Use , Hyaluronidase Injection 1500 Iu/Ml , Hyaluronidase Injection 1500 Iu/Ml (Appasamy) , Hydrochlorothizide 12.5 Mg Tablet , Hydrocortisone ( Sodium Sucinate Powder) Injection 100 Mg Vial, With 2 Ml Distilled Water For Reconstitution , Hydrogen Peroxide Solution 6%, 400 Ml Bottle , Hydroprogesterone 250 Mg Inj. , Hydroprogesterone 500 Mg Inj. , Hydroquinone 2%/4% + Tretinoin 0.025 % +Fluocinolone Skin Cream, 15 Gm Tube , Hydroquinone 2.0% W/W + Tretinoin 0.025% W/W + Mometasone Furoate 0.1% W/W In A Cream Base Q.S, 15 Gm Tube , Hydroquinone 20Gm Cream , Hydroxy Urea Cap 500Mg , Hydroxychloroquine 200 Mg Tablet , Hydroxychloroquine 400 Mg Tablet , Hydroxycobalamin Injection 1 Mg/ Ml , Hydroxypropyl Mehtylcellulose Injection 2 %, 5Ml , Hydroxypropyl Mehtylcellulose Injection 2 %, 5Ml (Appasamy) , Hydroxyzine Tablet 10 Mg , Hynidase / Omnidase Inj., 1500 Iu, Dry Vial Of Powder Not For Iv Use , Hyoscine Butyl Bromide Injection 20 Mg/ Ml , Hyoscine Butyl Bromide Tablet 10 Mg , Ibuprofen Oral Solution 100 Mg/5 Ml. 60 Ml Bottle , Ibuprofen Tablet 200Mg , Ibuprofen Tablet 400 Mg , Ibuprofen Tablet 400 Mg +Paracetamol 325 Mg Tablet , Ichthammol Glycerine Solution 10 Ml Vial , Imatinib Tablet 400 Mg , Imipenem And Cilastatin Injection (500 Mg+500 Mg) , Imipenem Injection 500Mg , Imipramine 75 Mg Tablet , Imipramine Tablet 25 Mg , Indomethacin 25 Mg Tab , Insulin (Soluble) Injection 40 Iu/Ml In 10 Ml Vial , Intracameral Lignocaine 1% 2Ml Inj , Intracameral Moxifloxacin Inj. (Opthalmic Sol.) , Intracameral Phenylephrine 0.5Ml Solution For Pupil Cataract Surgery , Intravenous Immunoglobulin(Ivig) 10 Gm,100 Ml Bottle , Iohexol Injection 300 Mg , Ipratropium Respirator Solution For Use In Nebulizer 250Mcg/ 1Ml, 2Ml , Iron And Folic Acid Tablet ( Wifs Junior ) Containing Dried Ferrous Sulphate Ip Equivalent To Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet. Tablet Are Sugar Coated And Pink Coloured Tablets With Only Edible Colours Used Tablet Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet , Iron Sucrose 100 Mg/Ferric Carboxymaltose Ml , 10 Ml Inj. , Isoflurane Inhalation 100 Ml Vial , Isoniazid Tablet 100Mg , Isoniazid Tablet 300Mg , Isophosphamide Injection 200Mg, 100Mg/Ml Vial , Isophosphamide Injection 200Mg, 100Mg/Ml Vial , Isosorbide Dinitrate Tablet (Sublingual) 5 Mg , Isosorbide Mononitrate Tablet 20 Mg (Xr) , Isosorbide Mononitrate Tablet 30 Mg (Sr) , Isotretinoin Capsule 20 Mg , Isoxsuprine Injection 5 Mg/ Ml, 2Ml , Isoxsuprine Tablet 10 Mg , Ispaghula Granules/ Husk/ Powder Sachet 3.5 Gm , Ispaghula Granules/ Husk/ Powder 100Gm. Gm , Itraconazole 100 Mg Tablet , Itraconazole 200 Mg Tablet , Ivermectin Tablet 12 Mg , Ivermectin Tablet 6 Mg , Ketaconazole Lotion 2% W/V, 50 Ml , Ketamine (As Hydrochloride) Injection 50 Mg /Ml,10 Ml Vial , Ketoconazole 200 Mg Tablet , Ketoconazole Sampoo 100Ml , Kojic Acid Cream 2 %, 15Gm , Labetalol Injection 20 Mg, 5Mg/Ml, 4 Ml Amopule , Labetalol Tablet 100 Mg , Lacosamide Tablet 100 Mg , Lactulose Solution 10 Mg/15 Ml, 60Ml , Lantus Insulin (Insulin Glargine 100 Units/Ml) , Latanoprost Ear Drops 0.005 % W/V, 5 Ml , Lenalidomide Tablet 10 Mg , Letrozole Tablet 2.5 Mg , Leucovorin Injection 50 Mg/5Ml , Levamasole Tablet 150 Mg , Levamasole Tablet 50 Mg , Levetiracetam Tablet 500 Mg , Levitiracetam Oral Solution 500Mg/5Ml, 100Ml , Levitracetam 500Mg/5Ml Inj., 5Ml Inj , Levocetrizine 5Mg + Montekulast 10 Mg Tablet , Levocetrizine Tablet 5 Mg , Levodopa + Carbidopa Tablet 100 Mg + 10 Mg , Levodopa Tablet 100Mg , Levofloxacin Eye Drop 5Ml , Levofloxacin Tablet 250Mg , Levofloxacin Tablet 500 Mg , Levosalbutamol (0.63Mg) Respules 2.5Ml , Levosalbutamol 1.25Mg + Ipratropium, 500Mcg, Respules , Levosulpride (Sr) 75 Mg + Rabeprazole (Ec) 20 Mg Capsule , Levothyroxine 100 Mcg Tablet , Lidocaine (2% W/V) + Clotrimazole 1% W/V + Beclomethasone 0.025% W/V + Ofloxacin (0.3% W/V) 5Ml Ear Drops , Lidocaine 10% Spray, 50Ml , Lidocaine 30Ml Inj. , Lidocaine Topical Spray (15% W/W), 100 Ml , Lignocaine 1% Ointment, 30Gm , Lignocaine 4% Spray Topical Solution 30Ml , Lignocaine Hydrochloride And Adrenaline Bitartarate Injection 20Mg/Ml And 0.01Mg/Ml Adrenaline, 30 Ml Vial , Lignocaine Injection 2%, 30 Ml Vial , Lignocaine Jelly 2% W/V ( With Seprate Nosal), 30Gm Tube , Linezolid Inj. 600Mg , Linezolid Tablet 600 Mg , Lithium Carbonate Tablet 300 Mg , Lithium Tablet special repair 400 Mg , Lmw Heparin Injection 60Mg/0.6Ml For Sc Use Prefilled Syringe , Loperamide 2Mg Tab. , Lorazepam Injection 4Mg, 2Ml , Lorazepam Tablet 1 Mg , Lorazepam Tablet 2 Mg , Losartan + Hydrochlorothiazide Tablet (50 Mg + 12.5 Mg) , Luliconazole Cream 1 % W/W, 30 Gm , Luperolide Acetate Injection 22.5 Mg , Magnesium Sulphate + Sullfacetamide (Sumag ) 75Gm Ointment , Magnesium Sulphate 58%, Urea 1%, Sulphacetamide Sodium 2.5%, Proflavine 0.1% (In Glycerine Base) Ointment 75Gm , Magnesium Sulphate Injection 1 Gm /2Ml (50%W/V), 2 Ml Ampoule , Magnesium Sulphate Injection 2.5 Gm /5Ml(50%W/V), 5 Ml Ampoule , Magnesium Sulphate Injection 500Mg/Ml,1 Ml Ampoule , Malathion 50% Ec, 1 Ltr , Malathion Technical 95%, 25 Kg , Mannitol Injectable Solution 20 %,100 Ml (Ffs Technology) , Mdi-Formoterol+Budesonide Inhaler , Medroxyprogesterone Acetate Injection Ip (Dmpa ) 25 X 1X 1Ml (Contraceptive Injection For Im Use Only) , Medroxyprogesterone Tablet 10 Mg , Melatonin Tablet 3 Mg , Memantine Tablet 5 Mg , Mephentermine Injection 30 Mg/Ml, 10 Ml Amp. , Meropenum Injection 125 Mg , Meropenum Injection 250 Mg , Meropenum Injection 500 Mg , Mesalamine 800 Mg Tablet , Mesna Injection 400 Mg , Metformin special repair 1 Gm Tablet , Metformin special repair 500 Mg Tablet , Metformin Tablet 1 Gm , Metformin Tablet 500 Mg , Methotrexate Injection 50 Mg, 2Ml Inj , Methotrexate Tablet 2.5 Mg , Methotrexate Tablet 50 Mg , Methoxsalen Tablet 10 Mg , Methyl Cobalamine 1500 Mcg Inj. , Methyl Cobalamine 500 Mcg Inj. , Methyl Ergometrine Injection 200 Mcg In 1 Ml Ampoule , Methyl Ergometrine Tablet 125 Mcg , Methyl Prednisolone Injection 1Gm, 1 Gm Vial With Diluent , Methyl Prednisolone Injection 80Mg , Methylcobalamin Tablet 1500 Mcg , Methylcobalamin Tablet 750 Mcg , Methylcobalamine + Pregabaline (1500+75) Tablet , Methyldopa Tablet 250 Mg , Methyldopa Tablet 500 Mg , Methylene Blue 25 Gm , Methylphenidate Tablet 5 Mg , Methylrosanilinium Chloride (Gentian Violet) Topial Preparation 0.25 % To 2% , Metoclopramide Injection 5 Mg/Ml, 2 Ml Ampoule , Metoclopramide Tablet 10 Mg , Metoprolol 5 Ml Injection , Metoprolol Tablet (Sr) 50 Mg , Metoprolol Xl 25 Mg Tablet , Metronidazole Injection 500 Mg/ 100Ml (Ffs Technology) , Metronidazole Oral Solution 200 Mg/5 Ml, 60Ml , Metronidazole Tablet 200 Mg , Metronidazole Tablet 400 Mg , Micronized Progesterone Tablet 200 Mg , Midazolam Injection 1 Mg/Ml, 5 Ml Vial , Mifepristone Tablet 200 Mg , Mifepristone Tablet 25 Mg , Minoxidil Solution 5% , Mirabegron Tablet 50 Mg , Mirtazapine Tablet 15 Mg , Mirtazepine 7.5 Mg Tablet , Misoprostol Tablet 200 Mcg , Misoprostol Tablet 25Mg , Mitomycin Injection 40 Mg , Mometasone + Terbinafine (0.1% W/W + 1.0 % W/W) 15 Gm Cream , Mometasone Furoate Cream 0.1 % W/W, 30Gm , Monteleukast Tablet 5 Mg , Montelucast 10Mg + Fexofenadine 120Mg Tablet , Morphine Injection 10 Mg/Ml, 1 Ml Ampoule , Morphine Tablet 10 Mg , Morphine Tablet 20 Mg , Morphine Tablet 30 Mg special repair , Mouth Ulcer Gel (Choline Salicylate Sodium 9% W/V, Benzalkonium Chloride 0.01% W/W) , Moxifloxacin 400 Mg. Tablet , Moxifloxacin 0.5% Eye Drop ,5Ml , Moxifloxacin 0.5% W/V+ Ketorolac 0.5% W/V Eye Drop ,5Ml , Moxifloxacin 0.5% W/V+ Prednisolone 1% W/V Eye Drop ,5Ml , Moxinidine 0.2 Mg Tablet , Multi Electrolyte Injection (Isolyte -P) 500Ml , Multi Vitamin Injection 10 Ml , Multi Vitamin Injection 2 Ml , Multi Vitamin Syrup With Trace Elements, 200Ml (Ffs Technology) , Multivitamin Drops, 15 Ml , Mupirocin Cream 5Gm, 2% W/W , Mupirocin Ointment 2% W/W, 5 Gm Tube , N-Acetylcysteine 600 Mg Tablet , Naloxone Injection 400 Mcg/Ml, 1Ml Ampoule , Naltrexone Tablet 50 Mg , Nandrolone Decanoate 50Mg Inj. , Naocl 5.25% Solution Isi/ Iso/Ce/Marked. , Naproxen 500Mg + Domperidone 10Mg Cap./Tab , Natamycin Eye Drops 2%, 5 Ml , Nebivalol Tablet 5 Mg , Neostigmine Injection 500 Mcg/ Ml , Netilmicin Injection 25Mg/Ml , Nicorandil 10 Mg Tablet , Nicorandil 5 Mg Tablet , Nicotin Chewgum 2 Mg , Nicotin Chewgum 4 Mg , Nicotine Pastilles 2 Mg , Nicotine Pastilles 4 Mg , Nicotine Patches , Nifedipine 0.3% W/W + Lidocaine 1.5% W/W Ointment, 30 Gm , Nifedipine Capsule(Sublingual) 5 Mg , Nifedipine Tablet Ip Sr/Er 10 Mg , Nikethamide Inj. 250Mg/1Ml , Nitrofurantoin Tablet 100 Mg , Nitroglycerin 2.6 Mg Tablet , Nitroglycerin 6.4 Mg Tablet , Nitroglycerin Inj. 25Mg/5Ml , Nitrous Oxide Inhalation , Nor Adernaline Injection 4Mg/2Ml , Norethisterone Tablet 5 Mg , Norfloxacin 400Mg Tab , Normal Saline (Sodium Chloride) Injection 0.9% Isotonic, 500 Ml (Ffs Technology) , Normal Saline (Sodium Chloride) Injection Solution 0.9% Isotonic, 100Ml(Ffs Technology) , Normal Saline 3% Injection 100Ml , Octreotide Injection 100 Mcg/Ml, Single Dose 1 Ml Vial , Ofloxacin + Dexamethasone Eye Drops 10 Ml , Ofloxacin 200Mg + Ornidazole 500Mg Inj.,100 Ml , Ofloxacin Tablet 200 Mg , Olanzapine 5 Mg Tablet , Olanzapine Injection 10Mg/Vial , Olanzapine Injection 210 Mg Long Acting , Olanzapine Injection 300 Mg Long Acting , Olanzapine Injection 405 Mg , Olanzapine Tablet 10 Mg , Olanzapine Tablet 20 Mg , Olmesartan 20 Mg + Amlodipine 5 Mg + Hydrochlorothiazide 12.5 Tablet , Olmesartan 20 Mg Tablet , Olpatadine 0.1%W/V Eye Drop 5 Ml , Omeprazole Capsule 20 Mg , Ondansetron Injection 2Mg/Ml ,2Ml Ampoule , Ondansetron Oral Liquid 2 Mg/ 5 Ml , Ondansetron Tablet 8 Mg , Oral Caffiene Citrate Sol. 20Mg/Ml, 3Ml , Oral Glucose 75 Gm , Oral Rehydration Salts Powder For 1000 Ml Solution , Oral Rehydration Salts Powder For 200 Ml Solution , Oseltamivir Syrup (Each 1 Ml Reconstituted Suspension Contain 12 Mg Oseltamivir, 75 Ml Bottle) Syrup , Oseltamivir Tablet 30 Mg , Oseltamivir Tablet 45 Mg , Oseltamivir Tablet 75 Mg , Oxaliplatin Injection 100Mg, 5Mg/Ml Vial , Oxaliplatin Injection 50Mg, 5Mg/Ml Vial , Oxygen (Medicinal Gas) Inhalation Per Kg , Oxytocin Injection 5 Iu In 1 Ml Ampoule , Paclitaxel Injection 260Mg, 10Mg/1.67 Ml Vial , Pantoprazole + Domperidone special repair (40Mg+30Mg) Capsule , Pantoprazole Injection 40 Mg , Paracetamol Drops 150Mg/Ml, 10 Ml Vial With Marked Dropper , Paracetamol Infusion 100 Mg/ 5 Ml, 100Ml , Paracetamol Injection 150 Mg/Ml, 2 Ml Amp. , Paracetamol Peadiatric Syrup 125Mg/ 5Ml, 60 Ml Bottle , Paracetamol Tablet 500 Mg , Paracetamol Tablet 650 Mg , Paroxetine (Cr) Tablet 25 Mg , Paroxetine Tablet (Cr) 12.5 Mg , Pazopanib Tablet 200 Mg , Peg Filgrastim Injection 6 Mg , Pemetrexed Injection 500Mg, 25Mg/Ml Vial , Pentazocine Injection 30 Mg/ Ml, 1 Ml Ampoule , Perampenel 2 Mg , Permethrin Cream 5% 30 Gm , Permethrin Lotion 5% 50 Ml , Pethidine Injection 50 Mg/Ml, 1Ml Ampoule , Pheniramine Maleate Injection 22.75 Mg/Ml, 2 Ml , Phenobarbitone Injection 200 Mg/ Ml , Phenobarbitone Oral Solution 20 Mg/ 5 Ml,60 Ml Bottle , Phenobarbitone Tablet 30 Mg , Phenobarbitone Tablet 60 Mg , Phenylephrine 10Mg + Pcm 325Mg +Cetrizine 5Mg Tablet (Anticold Tablet) , Phenytoin (Sodium) Injection 100Mg, 2Ml Amp. , Phenytoin Oral Solution 25 Mg/Ml, 100 Ml Glass Bottle , Phenytoin Tablet 100 Mg , Phenytoin Tablet 300 Mg , Phytomenadion Injection 1 Mg/0.5 Ml Water Based Single Dose (Vitamin-K1) , Pilocarpine Hcl 2% ,5Ml Eye Drops , Pilocarpine 1Ml Injection , Pioglitazone 30Mg Tab. , Pioglitazone 50 Mg Tablet , Piperacillin 1 Gm + Tazobactum 0.12Gm Injection , Pipracillin + Tazobactoam 4.5 Gm I/V Injection , Piracetam 400Mg Tab. , Piracetam 800Mg Tab. , Plasma Volume Expender Injection 500 Ml , Podophylline Resin Topical Solution 25% , 10 Ml Bottle , Posaconazole 100 Mg Tablet , Potassium Chloride (Solution) Injectable 15% (150Mg/Ml) , Potassium Chloride Oral Liquid 500 Mg/5 Ml, 100Ml , Potassium Permanganate Crystal 100 Gm(Kmno4) , Potassium Permanganate Crystal 20 Gm(Kmno4) , Povidine Iodine 10% ,500 Ml Solution , Povidine Iodine 5% Eye Drops, 5Ml , Povidine Iodine Ointment 5%,15 Gm , Povidine Iodine Scrub 7.5%, 500 Ml , Povidine Iodine Solution 5% ,500 Ml , Pralidoxime (Pam) Injection 500 Mg, 20 Ml , Prazosin 5 Mg Tablet , Prednisolone Sod. Phosphate Eye Drop 1%, 5Ml , Prednisolone Tablet 10 Mg , Prednisolone Tablet 20 Mg , Pregabalin 75 Mg+ Methylcobalamin 750 Mcg Tablet , Pregabalin 75Mg Cap. , Pregablin 75Mg +Methylcobalmin 1500Mg +Nortriptylline 10Mg , Primaquine Tablet 15 Mg , Primaquine Tablet 2.5 Mg , Primaquine Tablet 7.5 Mg , Probiotic Capsule , Prochlorperazine Mouth Dissolving Tablet Flavored Base 5Mg , Promethazine Elixir Or Syrup 5 Mg/ 5 Ml,60Ml , Promethazine Injection 25 Mg/Ml, 2 Ml annual periodical maintenance , Propofol Injection 1% Vial(10Mg/Ml,10 Ml Vial) , Propranolol Tablet (Sr) 40 Mg , Propranolol Tablet 20 Mg , Prostadin 2 Ml annual periodical maintenance Injection , Protamine Sulphate (Heparin Antagonist) Injection 10 Mg/Ml, 5-Ml Ampoule , Purified Freeze - Dried Human Coagulation Factor Viii, Virus Inactivated Injection 250 Iu , Purified Freeze Dried Human Coagulation Factor Ix, Virus Inactivated / Anti Hemophillic Factor Ix Injection 500Iu , Pyrazinamide 500 Mg Tablet , Pyrazinamide 750 Mg Tablet , Pyrazinamide 1000 Mg Tablet , Pyridium Tablet 200 Mg , Pyridoxine Tablet 50 Mg , Pyridoxine Tablet 100 Mg , Quetiapine Tablet 50 Mg , Quetiapine Tablet special repair 100 Mg , Quinine Sulphate Injection 300 Mg/ Ml, 2Ml Ampoule , Quinine Sulphate Tablet 300 Mg , Rabeprazole +Domparidone Cap. Dsr , Ramipril Tablet 5 Mg , Ranitidine Injection 25 Mg/Ml, 2 Ml annual periodical maintenance , Ranitidine Syrup 75 Mg/5 Ml, 100Ml Bottle , Ranitidine Tablet 150 Mg , Ranolazine 500 Mg Tablet , Raybiotic-Ac Ear Drop (Beclomethasone +Chloramphenical+Clotimazole+Lignocaine) 5Ml Ear Drop , Recombinant Tissue Plasminogen Activator Injection Kit (18.1 Mg, 2 Single Use Diluent Vials For Reconstitution (10 Ml Sterile Water For Injection, 2 Sterile 10 Ml Syringes, 2 Sterile Dispensing Pins, 4 Sterile Needles, 2 Alcohol Swabs , Remdesivir Injection 100Mg , Respule Levosalbutamol 1.2Mg + Ipratropium 500Mcg Respule , Ribavirin 200 Mg Cap. , Rifampicin 150 Mg Capsule , Rifampicin 300 Mg Capsule , Rifampicin 450 Mg Capsule , Rifampicin 600 Mg Capsule , Rifapentine Tablet 300 Mg , Rifaximin 550 Mg Tablet , Ringer Lactate 500 Ml (Ffs Technology) , Ringer Lactate Injection 500Ml (Glass Bottle) , Risperidone Tablet 2 Mg , Risperidone Tablet 4 Mg , Rituximab Injection 500 Mg , Rosuvasatatin 10 Mg Tablet , Rosuvasatatin 20 Mg Tablet , Rosuvastatin 10 Mg+ Fenofibrates 160 Mg Tablet , Saccharomyces Boulardii 5 Cfu Sachets , Salbutamol Inhalation Mdi- 100 Microgram/ Dose , Salbutamol Nebulizer /Respirator Sol. 2.5Mg/2.5Ml , Salbutamol Oral Solution 2 Mg/5 Ml, 100Ml , Salbutamol Tablet 4 Mg , Salicylic Acid Ointment 6%, 15 Gm , Saline Nasal Drops 0.65%, 10Ml , Savlon Antisepic Solution / Liquid 100 Ml Bottle , Seasonal Influenza Quadrivalent/ Tetravalent Vaccine Single Dose , Sensorcaine Injection 0.5% 20 Ml , Serratiopeptidase 10Mg Tab. , Sertaconazole Cream 2% W/W, 15 Gm , Sertraline Tablet (Sr) 50 Mg , Sertraline Tablet 100 Mg , Sevelamer 800Mg Tablet , Sevoflurane Inhalation 250 Ml , Silodosin Tablet 8.0 Mg , Silver Sulfadiazine 250 Gm , Silver Sulfadiazine Cream 1%,30Gm , Simethicone+ Dill Oil + Fennel Oil Syrup, 15Ml , Sodium Bicarbonate Injection 7.5 % , 10 Ml Ampoule , Sodium Carboxymethyl Celloluse Eye Drop 0.5%W/V , 10Ml , Sodium Carboxymethyl Cellulose Eye Drops 0.5%W/V, 5Ml , Sodium Chloride Topical Eye Drop 6%W/V , 5Ml , Sodium Fusidate Skin 2% W/V Ointment 15Gm , Sodium Hylanuranate 1.8 % In 1 Ml Pfs ( (Isi/Iso/Ce Certified)) , Sodium Valproate Injection 100 Mg/Ml, 5Ml , Sodium Valproate Suspension 200 Mg/5 Ml, 100 Ml , Sodium Valproate/Valproic Acid (Sodium)Controlled Released Tablet 300 Mg , Sodium Valproate/Valproic Acid Enteric Coated Tablet 200 Mg , Sodium Valproate/Valproic Acid Enteric Coated Tablet 500 Mg , Sofosbuvir 400 Mg Tablet , Sofosbuvir 400 Mg Tablet + Ledipasvir 90 Mg Tablet , Sofosbuvir 400Mg+ Velpatasvir 100 Mg Tablet , Sorafenib Tablet 200 Mg , Sorbitrate (Iso-Sorbidnitrate Sublingual) 5 Mg Tablet , Spironolactone Tablet 25 Mg , Streptokinase Injection Powder 1500000 Iu , Succinyl Choline Injection 50 Mg/Ml, 10Ml , Sucralfate 1Gm With Oxetacain 10Mg/10Ml Suspension, 100 Ml Bottle , Sulfadoxine + Pyrimethamine Tablet 500 Mg + 25 Mg , Sulfasalazine Tablet 500 Mg , Sunitinib Tablet 50 Mg , Sunscreen Lotion Spf 26, 100 Ml , Surfactant- Survanta(Synthetic)(25 Mg/1Ml), Exosurf (Bovine) , Tacrolimus Ointment 0.03% W/W, 10 Gm , Tadalafil 10 Mg , Tamoxifen Citrate Tablet 10 Mg , Tamoxifen Citrate Tablet 20 Mg , Tamsulosin 0.4 Mg + Dutasteride 0.5 Mg Tablet , Tamsulosin Tablet 0.4 Mg , Telmisartan Tablet 40 Mg , Telmisartan Tablet 80 Mg , Temozolamide Tablet 100 Mg , Temozolamide Tablet 250 Mg , Temphos 50% Ec 5 Liter Pack , Tenecteplase Injection 20 Mg , Teneligliptin Film Coated Tablet 20 Mg , Tenofovir 300 Mg Od Tablet , Tenofovir 300 Mg+ Lamivudine 300 Mg Tablet , Terbinafine Tablet 250 Mg , Terlipressin 1 Mg Inj. , Tetanus Toxoid Injection 0.5 Ml Ampoule , Tetanus Toxoid Injection 5 Ml Vial , Thalidomide Tablet 100 Mg , Thiamine Injection 100 Mg/Ml, 2 Ml , Thiamine Tablet 100 Mg , Thiocolchicoside Capsule 4 Mg , Thiopentone Injection Powder 0.5 G , Thyroxine Tablet 100 Mcg , Thyroxine Tablet 125 Mcg , Thyroxine Tablet 150 Mcg , Thyroxine Tablet 25 Mcg , Thyroxine Tablet 50 Mcg , Thyroxine Tablet 75 Mcg , Timolol Eye Drops 0.5% ,5Ml , Tinidazole Tablet 500 Mg , Tizanidine Tablet 4Mg , Tobramycin Eye Drops 0.3% W/V, 5Ml , Tocilizumab Injection 400 Mg/20 Ml , Toperamate Tablet 50 Mg , Torasemide Tablet 10 Mg , Torasemide Tablet 20 Mg , Torsemide + Spironolactone 10/50 Mg Tablet , Tramadol Capsule 50 Mg , Tramadol Hydrochloride Capsule 100 Mg , Tramadol Injection 50 Mg/Ml, 2 Ml Ampoule , Tranexamic Acid 500 Mg + Mefenamic Acid 250 Mg Tablet , Tranexamic Acid Injection 500 Mg/5 Ml , Tranexamic Acid Tablet 500 Mg , Tranylcypromine Tablet 5 Mg , Trastuzumab Injection 150 Mg , Trastuzumab Injection 450 Mg , Tretinon Gel (0.05%) 20Gm , Triamcinolone Injection 40 Mg/Ml , Triancinolone Oral Paste/Gel (0.1%) , Tricholine Citrate 275Mg + Cyproheptadine Hcl 2Mg/5Ml Syrup, 200Ml , Trihexyphenidyl Tablet 2 Mg , Trihexyphenidyl Tablet 5 Mg , Trimetazidine 35 Mg Tablet , Tropciamide Eye Drops 5Ml , Tropicamide + Phenylepherine Eye Drops 0.8% + 5%, 5Ml , Tropicamide Eye Drops 1% Eye Drop 5Ml , Tropicamide+Phenylepherine(0.8%+5%) Eye Drop 5Ml , Tryptan Blue Dye 0.06% W/V, 1 Ml Vial , Ursodeoxycholic Acid Tablet 300 Mg , Valethamate Injection 8 Mg/Ml , Vancomycin Injection 500 Mg , Vareniciline 0.5Mg Tablet , Vareniciline 1 Mg Tablet , Vecuronium Injection 10Mg Vial , Venalafaxine Tablet 37.5 Mg , Venalafaxine Tablet 75 Mg , Verapamil Tablet 40 Mg , Vidagliptin 50Mg , Vinblastine Injection 10 Mg, 1Mg/Ml Vial , Vincristine Suphate Injection 1 Mg, 1Mg/Ml Vial , Vitamin A Oral Solution 100000 Iu/Ml, 100Ml Bottle , Vitamin D Tablet (Chewable) 60000Iu , Vitamin D3 Drops 400 Iu/Ml, 30 Ml , Vitamin-D3 60000 Iu Cap. , Voglibose 0.3 Mg + Metformin 500Mg+ Glimipride 1 Mg Tablet , Voglibose 0.3 Mg Tablet , Vortioxetine Tablet 10 Mg , Warfarin (Sodium) Inj Single Dose Vial , Warfarin (Sodium) Tablet 2 Mg , Wax Dissolving Ear Drops Paradichlorbenzene + Benzocain + Chlorbutol + Turpentine Oil 2 % + 2.7 % + 5 % + 15 %, 15 Ml Bottle , Weekly Iron Folic Acid Tablet Each Tablet Containing 60 Mg Elemental Iron+500 Mcg Folic Acid, Sugar Coated ,Blue Colour , Xylometazoline Nasal Drops 0.05 %, 10Ml , Xylometazoline Nasal Drops 0.1 %, 10Ml , Zinc (Sulphate) Dispersible Tablet 20 Mg , Zinc Oral Drops, 30Ml , Zinc Syrup 20 Mg/5Ml, 100Ml , Zolidronic Acid Injection 4 Mg , 4% Taper Gutta Percha Size 25 , 6% Taper Gutta Percha Size 25 , 6% Taper Gutta Percha Size 30 , 6% Taper Gutta Percha Size 35 , 6% Taper Gutta Percha Size 40 , Absorbent Point No.15-40, Isi/Iso/Ce Marked Packet Of 200 , Absorbent Point No.45-80, Isi/Iso/Ce Marked Packet Of 200 , Acrylic Teeth Cross Linked Anterior Set Of 12 Teeth Isi/Iso/Ce Marked , Acrylic Teeth Cross Linked Posterior Set Of 16 Teeth Isi/Iso/Ce Marked , Acrylic Teeth Cross Linked Teeth Set Of 28 Teeth Isi/Iso/Ce Marked , Acrylic Trimming Stone (Various Grit) Isi/Iso/Ce Marked , Acrylic Trimming Stone Isi/Iso/Ce Marked , Agar Isi/Iso/Ce Marked , Air Rotor Cartridges (Nsk) Standard Head Isi/Iso/Ce Marked , Air Rotor Cartridges (Nsk) Supertorque Isi/Iso/Ce Marked , Air Rotor Spray Isi/Iso/Ce Marked Bottle , Alginate Impression Material Isi/Iso/Ce Marked , Alu Wax Isi/Iso/Ce Marked , Amalgam Finishing Kit , Arch Bar Length 1 Feet Isi/Iso/Ce Marked , Articulating Paper Isi/Iso/Ce Marked (40-100 Microns) , B.P. Blade Size 11 Isi/Iso/Ce Marked , B.P. Blade Size 15 Isi/Iso/Ce Marked , B.P. Blade Size 23 Isi/Iso/Ce Marked , Beading Wax Isi/Iso/Ce Marked , Bioplast Sheets Proprietary Item 2 Mm Thickness Isi/Iso/Ce Marked , Bioplast Sheets Proprietary Item 3 Mm Thickness Isi/Iso/Ce Marked , Blue Elastic Separators ( Leone/ American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bondable Buccal Tubes Upper And Lower Right And Left 1St Molars .022€ Mbt With Upper Triple And Lower Double Slot (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bondable Buccal Tubes Upper And Lower Right And Left 2Nd Molars .022€ Mbt (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bonding Agent For Composite 2 Bottle Self Etch System Isi/Iso/Ce Marked 4-6 Gm Or Equivalent In Ml , Bonding Agent For Composite One Bottle Total Etch System (Bottle With Primer +Adhesive) 4-6 Gm Or Equivalent In Ml. Isi/Iso/Ce Marked , Bone Graft Material For Dental Purpose Isi/Iso/Ce/Marked , Boxing Wax Isi/Iso/Ce Marked , Calcium Hydroxide Paste In Syringe Isi/Iso/Ce Marked , Calcium Hydroxide Two Paste System Isi/Iso/Ce Marked , Carborundum Disc (Assorted Size)Isi/Iso/Ce Marked , Cavity Varnish Isi/Iso/Ce Marked , Ceramic Finishing Kit , Chrome Cobalt Alloy Isi/Iso/Ce Marked , Collagen Membrane-Sterile Bioresorbable Gtr Collagen Membrane Isi/Iso/Ce Marked , Colourless O Rings (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Composite Finishing Kit - Disc Type With 180 To 240 Dics Of Different Grits ,Mandrel , Composite Finishing Kit With 12 To 24 Finishing Points Of Different Shapes , Composite Nanohybrid , Crimpable Hooks Isi/Iso/Ce Marked , Cu Niti Wires Rectangular Isi/Iso/Ce Marked , Cu Niti Wires Round Isi/Iso/Ce Marked , Dental Stone Isi/Iso/Ce Marked , Denture Polishing Cake Isi/Iso/Ce Marked , Diamond Disc For Lab Micro-Motor (Assorted Size)Isi/Iso/Ce Marked , Die Stone Isi/Iso/Ce Marked , Digital Films Size 11€X14” Compatible With Kodak Dry View 5800 Digital Imager Isi/Iso/Ce Marked , Digital Films Size 8€X10” Compatible With Kodak Dry View 5800 Digital Imager Isi/Iso/Ce Marked , Disclosing Agent Isi/Iso/Ce Marked , Disposable Patient Drape Sheets Size 1X1 Mtrs. , Dual Cure Resin Cement 9-11 Gm , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Continous Types Isi/Iso/Ce Marked , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Long Types Isi/Iso/Ce Marked , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Short Types Isi/Iso/Ce Marked , Electro- Polishing Solutionisi/Iso/Ce Marked , Endo Ice , Esthetic Fiber Post System , Etchant 37% Phosphate Acid In Gel Form 2-4 Gm, Isi/Iso/Ce Marked , Eugenol 110 Ml/Gm Isi/Iso/Ce Marked , Expansion Screw 3 Pin (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Fiber-Reinforced Splinting Material- Bondable Reinforced Ribbon Fiber-Approx. 2Mm Width Isi/Iso/Ce Marked , Finishing Stones (Assorted Size) Isi/Iso/Ce Marked , Fixer & Developer Solution Set ( Autoprocessor ) To Make 1.25 Lt Solution Each Of Fixer And Developer Isi/Iso/Ce Marked , Fixer & Developer Solution Set (Manual) To Make 13.5 Lt Solution Each Of Fixer And Developer Isi/Iso/Ce Marked , Flowable Composite , Forsus Fatigue Resistant Device( 3 M Unitek ), Proprietary Itemisi/Iso/Ce Marked , Friction Grip Carbide Burs For Cutting (Different Shapes) Isi/Iso/Ce Marked , Friction Grip Carbide Burs For Finishing (Different Shapes) Isi/Iso/Ce Marked , Friction Grip Diamond Burs (Different Shapes) Isi/Iso/Ce Marked , Gates Glidden Drill No.1 , Gates Glidden Drill No.2 , Gates Glidden Drill No.3 , Glass Lonomer Luting Cement Isi/Iso/Ce Marked , Glass Lonomer Restorative Cement Isi/Iso/Ce Marked , Glass Lonomer Silver Reinforced Isi/Iso/Ce Marked , Gluteraldehyde 2.45% W/V Disinfection Solution Isi/Iso/Ce Marked , Green Stick Impression Compound Isi/Iso/Ce Marked , Gutta Percha Point No. 15-40, Isi/Iso/Ce Marked , Gutta Percha Point No. 20, Isi/Iso/Ce Marked , Gutta Percha Point No. 25, Isi/Iso/Ce Marked , Gutta Percha Point No. 30, Isi/Iso/Ce Marked , Gutta Percha Point No. 45-80, Isi/Iso/Ce Marked , Heat Cure Acrylic Liquid Isi/Iso/Ce Marked , Heat Cure Acrylic Powder Isi/Iso/Ce Marked Pink , Hybrid Composite Resin For Anteriors 3-4 Gram Isi/Iso/Ce Marked , Impression Compound Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Blue Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Green Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Red Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Yellow Isi/Iso/Ce Marked , Investent Material And Liquid (Phosphate Bonded) Isi/Iso/Ce Marked (For Chrom Cobalt) , Investent Material And Liquid (Phosphate Bonded) Isi/Iso/Ce Marked (For Porcelain) , Investment Material (Gypsum Bonded) Isi/Iso/Ce Marked , Investment Material (Silicate Bonded) Isi/Iso/Ce Marked , Iopa Film Size 30/31 Mm X 40/41 Mm (Packet Of 150 Films ) Isi/Iso/Ce Marked , Iowa Wax Isi/Iso/Ce Marked , Korecta Wax No. 4 Isi/Iso/Ce Marked , Lentulo Spiral Filler , Ligature Wire Spool 0.009€(T Porthodontics/American Orthodontics / Libral) Isi/Iso/Ce Marked , Ligature Wire Spool 0.010€(T Porthodontics/American Orthodontics / Libral) Isi/Iso/Ce Marked , Light Cure Bonding Material (Dentsply / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek )Isi/Iso/Ce Marked , Light Cure Composite Resin-Packable Isi/Iso/Ce Marked 2-4 Gm Syringe , Local Anesthetic Liganocaine 2% With Adr 1 In 80000 For Dental Use , Loose Preadjusted Edgewise Mbt Bracket 022 Slot Isi/Iso/Ce Marked Per Bracket , Matrix Band (No. 1 Toflemire)-1Si/Iso/Ce Marked , Matrix Band (No. 8 Toflemire)-1Si/Iso/Ce Marked , Maxillofacial Silicone And Stain Isi/Iso/Ce Marked , Medical X-Ray Film (1X50) 8 X10 , Mercury Pure Triple Distilled 225Gm Vial Isi/Iso/Ce Marked , Metal Polishing Cakeisi/Iso/Ce Marked , Mineral Trioxide Aggregate Isi/Iso/Ce Marked , Mock Up/Diagnostic Waxisi/Iso/Ce Marked , Modeling Wax Isi/Iso/Ce Marked , Naoci 5.25% Solution Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -016X022 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -017X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -019X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 014 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 016 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 018 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 020 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Nickel Chromium Alloy Isi/Iso/Ce Marked Pack Of 1 Kg , Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 12Mm Isi/Iso/Ce Marked , Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 9Mm Isi/Iso/Ce Marked , Ni-Ti Open Coil Spring0 10€X 030 (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marke , Occlusal X-Ray Films (57X76 Mm) Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 10 Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 6Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 7Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 8Mm Isi/Iso/Ce Marked , Pit & Fissure Sealant Light Cure , Low Viscosity, Fluoride Releasing Isi/Iso/Ce Marked , Plaster Of Paris For Dental Use Isi/Iso/Ce Marked , Polyether Impression Material Base & Catalyst Base 300Ml, With 60 Ml Catalyst , One Dispenser With 3 Year Replacement Warranty Free With 50 Packs , Powerscope 2 (American Orthodontics Proprietary Item)Isi/Iso/Ce Marked , Pre Fabricate Metallic Post (Threaded) , Pre Fabricated Metallic Post ( Cemented) , Preadjusted Edgewise Stainless Steel Brackets Kit Containing Upper & Lower 2Nd Premolar To 2Nd Premolar Bondable Brackets With Upper Triple And Lower Double Weldable Buccaltubes,With Roth And Mbt Prescription And 0.022€And 0.018€ Slot (Leone/American Orth , Preformed Molar Bands Without Buccal Tubesisi/Iso/Ce Marked , Protemp 4 (Bisgma Temporary Crown Material) Iso/Isi/ Ce , Pumice Isi/Iso/Ce Marked , Resin Bonded Zinc Oxide-Eugenol Cement Isi/Iso/Ce Marked , Resin Cement Isi/Iso/Ce Marked , Retraction Cord (Assorted Size Isi/Iso/Ce Marked , Revo S Rotary Files Size As30 , Revo S Rotary Files Size As35 , Revo S Rotary Files Size As40 , Revo S Rotary Files Size Sc1 , Revo S Rotary Files Size Sc2 , Revo S Rotary Files Size Su , Ring Liner (Asbestos)Isi/Iso/Ce Marked , Root Canal File K 15-40, 21 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal File K 15-40, 25 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal File K 45-80, 25 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- 15, 21 Mm Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files H- 15-40 (21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files H 15-40, 25 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- 20 (21 Mm) Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- 45-80 (25 Mm) Pkt. Of Six Isi/Iso/Ce Marked Ce Marked Pkt. Of 200 , Root Canal Files H- 45-80, 21 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- No. 15 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files H- No. 20 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files K- 15, 21 Mm Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- 20 (21 Mm) Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files K- 45-80, 21Mm Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 10 (21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 10, 25 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 15 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files K- No. 20 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files K- No. 6 (21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 6, ( 25 Mm) Pkt. Of Six 197.00 Isi/Iso/Ce Marked , Root Canal Files K- No. 8,(21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No.8, 25 Mm) Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Spreader 15-40, 21 Mm Isi/Iso/Ce Marked , Root Canal Spreader 15-40, 25 Mm Isi/Iso/Ce Marked , Rotary Niti Files With 4% Taper Size #15/17.#20,#30.##40,21 Mm And 25 Mm Pack Of 4-6, Isi/Iso/Ce Certified/Usfda , Rotary Niti Files With 6% Taper Size #15/17.#20,#30.##40,21 Mm And 25 Mm Pack Of 4-6, Isi/Iso/Ce Certified/Usfda , Rpd Pattern Wax: Clasp Patternisi/Iso/Ce Marked , Rpd Pattern Wax: Major Connector Pattern Isi/Iso/Ce Marked , Rpd Pattern Wax: Minor Connector Pattern Isi/Iso/Ce Marked , Rubber Base Impression Material Addition Silicone Putty Isi/Iso/Ce Marked , Rubber Base Impression Material Addition Silicone Putty With Compatible Light Body 600-900Ml Putty With 50 Ml Light Per 300Ml Of Putty Isi/Iso/Ce Marked , Rubber Dam Sheet Isi/Iso/Ce Marked , Sand (For Sand Blaster)(250Micron) , Sand Paper Mandrel Isi/Iso/Ce Marked , Sand Paper No 100 Isi/Iso/Ce Marked , Sand Paper No 1000 Isi/Iso/Ce Marked , Sand Paper No 120 Isi/Iso/Ce Marked , Sand Paper No 400 Isi/Iso/Ce Marked , Sand Paper No 80 Isi/Iso/Ce Marked , Self Cure Bonding Material Isi/Iso/Ce Marked , Self Polymerizing Acrylic Liquid Isi/Iso/Ce Marked , Self Polymerizing Acrylic Powder Isi/Iso/Ce Marked Pink , Shellac Base Plate Isi/Iso/Ce Marked , Silicone Adhesive Isi/Iso/Ce Marked , Silicone Interocclusal Record Material Isi/Iso/Ce Marked , Silk Suture Material (3-0) , Silver Alloy Non Gamma-2 Lathe Cut Alloy 30 Gm Vial Isi/Iso/Ce Marked , Small Cotton Rolls For Isolation Isi/Iso/Ce Marked A Pack Of 1000 Pieces , Soft Denture Liner Isi/Iso/Ce Marked , Sprue Wax (Assorted Sizes)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 016X022 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 017X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 019X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 014 Inch (Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 016 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 018 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 020 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Wire 19 G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire 21G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire 26G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire 30G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 19 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 20 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 21 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 23 Gauge Isi/Iso/Ce Marked , Sterilization Rolls For Packing Instrument 10Cm X 200 Mtrs. , Sterilization Rolls For Packing Instrument 15Cm X 200Mtrs , Sticky Wax Isi/Iso/Ce Marked , Suction Tips Isi/Iso/Ce Marked , Surgical Bur Straight Fissure Carbide 1 Mm Isi/Iso/Ce/Marked , Surgical Bur Straight Fissure Carbide 1.5 Mm Isi/Iso/Ce/Marked , Surgical Bur Straight Fissure Carbide 2 Mm Isi/Iso/Ce/Marked , Tma Wire Lengths Rectangular - 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wire Lengths Rectangular - 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wires Preformed Rectangular- 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wires Preformed Rectangular- 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tooth Colored Self Cure Acrylic Resin (Self Cure) Isi/Iso/Ce Marked , Tooth Preparation Kit Set Of Minimum 14 Burs Isi/Iso/ Ce Marked , Topical Fluoride Apf Gel 1.25% Isi/Iso/Ce Marked , Tray Adhesive For Addition Siliconeisi/Iso/Ce Marked , Waxes For Fpd (Assorted Consistency) Isi/Iso/Ce Marked (Block Out, Margin Wax, Carving Wax, Dipping Wax, Blue Wax, Spacer Wax Etc.) , Zinc Oxide Eugenol Impression Paste Isi/Iso/Ce Marked Pkt. Of (100-125)+ (60-90) Gm , Zinc Oxide Non Eugenol Impression Paste Isi/Iso/Ce Marked (Catalyst + Base Past) , Zinc Oxide Non -Eugenol Luting Cement Isi/Iso/Ce Marked , Zinc Oxide Powder 110 Gram Isi/Iso/Ce Marked , Zinc Phosphate Cement 30-100 Gm With Corresponding Liquid Isi/Iso/Ce Marked , Abdominal Drain 28 No (Isi/Iso/Ce Certified) , Abdominal Drain 30 No (Isi/Iso/Ce Certified) , Abdominal Drain 32 No (Isi/Iso/Ce Certified) , Absorable Gelatin Sponge, Single Unit(Abgel) , Adhesive Plaster(Medigrip) 3 Inches , Adhesive Plaster(Medigrip) 04 Inches , Agfa Complete X Ray Cassette With I.P Size 10X12 ( (Isi/Iso/Ce Certified)) , Agfa Complete X Ray Cassette With I.P Size 14X17 ( (Isi/Iso/Ce Certified)) , Agfa Complete X Ray Cassette With I.P Size 8X10 ( (Isi/Iso/Ce Certified)) , Agfa Cr Film (Dt2b)(1X100) 10X12 (Isi/Iso/Ce Certified) , Agfa Cr Film (Dt2b)(1X100) 11X14 (Isi/Iso/Ce Certified) , Agfa Cr Film (Dt2b)(1X100) 14X17 (Isi/Iso/Ce Certified) , Agfa Cr Film (Dt2b)(1X100) 8X10 (Isi/Iso/Ce Certified) , Agfa X-Ray Cassette Without I.P 10X12 (Isi/Iso/Ce Certified) , Agfa X-Ray Cassette Without I.P Size 14X17 (Isi/Iso/Ce Certified) , Airway Set Size 2, ( Single Unit) (Isi/Iso/Ce Certified) , Airway Set Size 3, ( Single Unit) (Isi/Iso/Ce Certified) , Airway Set Size 4, ( Single Unit) (Isi/Iso/Ce Certified) , Airway Set Size 5, ( Single Unit) (Isi/Iso/Ce Certified) , Alcohol Swabs A Pack Of 1X100 Saturated With 70% Isopropyl Alcohol Celloluse Swab , Ambu Bag Adult, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 7 K Pa ( 70 Cm H2o Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 1300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Ambu Bag Neonates, It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Ambu Bag Ped, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 4 K Pa ( 40 Cm H2o Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Anterior Chamber Kellmann Multi Flex 4 Point Fixation Type Optical Diameter 6Mm,Overall Length 12.5 Mm, Dioptric Range 10D To 30 D (Isi/Iso/Ce Certified) , Anterior Chamber Pmma Iol Optical Diameter 5.25Mm , Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range 10 D To 30 D ( Appaswamy) , Anterior Chamber Pmma Iol Optical Diameter 6 Mm , Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range 10 D To 30 D ( Appaswamy) , Aprons (Lab Coats ) (Small) Full Sleeves , Aprons (Lab Coats ) (Small) Half Sleeves , Aprons (Lab Coats) (Large) Full Sleeves , Aprons (Lab Coats) (Large) Half Sleeves , Aprons (Lab Coats) (Medium) Full Sleeves , Aprons (Lab Coats) (Medium) Half Sleeves , B.P. Blade 23 No. (Isi/Iso/Ce Certified) , Bain Circuit Adult (Isi/Iso/Ce Certified) , Bain Circuit Pediatric (Isi/Iso/Ce Certified) , Band Aid (Regular) (Isi/Iso/Ce Certified) , Band Aid (Regular) (Jhonson & Jhonson) , Bakri Ballon Tamponade , Bakri Ballon Catheter , Bb Splint (Bohler- Braun) (Isi/Iso/Ce Certified) , Bed Sheet Size-150 X 240 Cm, All Colours , Bed Sheet Size-150 X 240 Cm, Color:Blue , Bed Sheet Size-150 X 240 Cm, Color:Green , Bed Sheet Size-150 X 240 Cm, Color:Indigo , Bed Sheet Size-150 X 240 Cm, Color:Orange , Bed Sheet Size-150 X 240 Cm, Color:Peach , Bed Sheet Size-150 X 240 Cm, Color:Violet , Bed Sheet Size-150 X 240 Cm, Color:White , Bed Sheet Size-150 X 240 Cm, Color:Yellow , Blades For Eye Surgery 2.2 Mm (Crescent) ( Appasamy)) , Blades For Eye Surgery 2.8 Mm (Keratome) ( Appasamy) , Blades For Eye Surgery 3.0 Mm ( Appasamy) , Blades For Eye Surgery 3.2 Mm ( Appasamy)) , Blades For Eye Surgery 2.6 Crescent ( Appasamy)) , Blades For Eye Surgery Implant 5.2 Mm ( Appasamy)) , Blades For Eye Surgery Side Port 15° ( Appasamy)) , Blankets,Red Standared Wt. And Size (Isi/Iso/Ce Certified) , Blood Bag Paed. 100Ml ( Romsons) , Blood Bag Paed. 100Ml (Isi/Iso/Ce Certified) , Blood Collecting Safety Syringe ( (Isi/Iso/Ce Certified)) , Blood Filter Set With Air Vent(Double Chamber) (Isi/Iso/Ce Certified) , Blood Filter Set With Air Vent(Double Chamber) (Romsons) , Cancellous Full Thread 6.5 ( (Isi/Iso/Ce Certified)) , Cassette Holding Tray (20-25 Cassette Holding Capacity) ( (Isi/Iso/Ce Certified)) , Catgut Suture (Chromic Catgut)Usp 1, 76 Cm X 63 Mm, 3/8 Circle ( (Isi/Iso/Ce Certified)) , Cautery Pad , Chest Drain (Adults) ( (Isi/Iso/Ce Certified)) , Chest Drain Bag ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 12 ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 14 ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 28 ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 32 ( (Isi/Iso/Ce Certified)) , Chest Tube Drainage With Trocar And Cannula ( (Isi/Iso/Ce Certified)) , Chest Tube With Underseal Bag 32 ( (Isi/Iso/Ce Certified)) , Cord Clamp ( (Isi/Iso/Ce Certified)) , Corugated Drain Sheet ( (Isi/Iso/Ce Certified)) , Cotton Bandages 10 Cm X 4 Mtrs(Isi Standard , Iso9001 &Gmp Certified) Rate Per Single Bandage , Cotton Bandages 15 Cm X 5 Mtrs(Isi Standard ,Iso9001& Gmp Certified)Rate Per Single Bandage , Cotton Bandages 5 Cm X 4 Mtrs(Isi Standard ,Iso 9001 & Gmp Certified)Rate Per Single Bandage , Cotton Gauze Cloth 90 Cm X 18 Mtrs(Isi Standard , Iso9001 &Gmp Certified)Rate Per Single Bandage , Cotton Pad 4 Packed Isi Marked ,Iso9001& Gmp Certified , Cotton Pad 6 Packed Isi Marked ,Iso9001& Gmp Certified , Cotton Wool Ip 100 Gm(Fine Absorbable Quality Sterlize) Nett Weight Iso9001& Gmp Certified , Cotton Wool Ip 500 Gm(Fine Absorbable Quality Sterlize) Nett Weight Iso9001&Gmp Certified , Courtery Lead ( Single Unit) ( (Isi/Iso/Ce Certified)) , Coutery Pad (Single Unit) ( (Isi/Iso/Ce Certified)) , Cpd Bag Double With Sagm 450 Ml ( (Isi/Iso/Ce Certified)) , Cpd Bag Double With Sagm 450 Ml ( Romsons) , Cpda Bag/ Blood Begs 350Ml ( (Isi/Iso/Ce Certified)) , Cpda Bag/ Blood Begs 350Ml ( Romsons) , Craner Wire Splint ( (Isi/Iso/Ce Certified)) , Crape Bandages Bp 10 Cm X 4.5 Mtrs ( (Isi/Iso/Ce Certified)) Rate Per Single Bandage , Crape Bandages Bp 15 Cm X 4.5 Mtrs(Isi Standard, Iso 9001&Gmp Certified )Rate Per Single Bandage , Dark Glasses , Dead Body Cover Size - 06 Feet Full Size , Developer For X-Ray To Make 13.5 Ltr. Solution ( (Isi/Iso/Ce Certified)) , Diaper Paediatric , Diaper Neonate , Didecyidimethyl Amonium Chloride And Benzyl C12c16 Alkyl Methyl Chloride Solution Presaturated Wipes ( (Isi/Iso/Ce Certified)) , Dispo Face Shield ( (Isi/Iso/Ce Certified)) , Disposable Adhesive Cannula Fixator (Iso 9001&Gmp Certified) , Disposable Bed Sheet , Disposable Cap With Elastic ( (Isi/Iso/Ce Certified)) , Disposable Eye Patch ( (Isi/Iso/Ce Certified)) , Disposable Eye Sticking Pad (Attached Multilayered) ( (Isi/Iso/Ce Certified)) , Disposable Eye Sticking Pad (Attached Multilayered) ( Appaswamy) , Disposable Insulin Syringe (31G) ( (Isi/Iso/Ce Certified)) , Disposable Mask With Strings ( (Isi/Iso/Ce Certified)) , Disposable Needle No. 16 ((Isi/Iso/Ce Certified) ) , Disposable Needle No. 21 No. ( (Isi/Iso/Ce Certified) , Disposable Needle No. 23(Isi/Iso/Ce Certified) , Disposable Needle No. 24 (Isi/Iso/Ce Certified) , Disposable Needle No. 26 (Isi/Iso/Ce Certified) , Disposable Nitrile Gloves 6.5 No. ( (Isi/Iso/Ce Certified)) , Disposable Nitrile Gloves 7 No. ( (Isi/Iso/Ce Certified)) , Disposable Nitrile Gloves 7.5 No ( (Isi/Iso/Ce Certified)) , Disposable Patient Drape Sheets ( (Isi/Iso/Ce Certified)) , Disposable Patient Drape Sheets ( Romsons) , Disposable Plastic Bed Pan ( (Isi/Iso/Ce Certified)) , Disposable Plastic Dropper (Capacity 3Ml)( (Isi/Iso/Ce Certified)) , Disposable Plastic Urine Pot ( (Isi/Iso/Ce Certified)) , Disposable Shoe Cover ( (Isi/Iso/Ce Certified)) , Disposable Sterile Powder Free Gloves For Eye Surgeries Size 6.5 ( (Isi/Iso/Ce Certified)) , Disposable Sterile Powder Free Gloves For Eye Surgeries Size 7 ( (Isi/Iso/Ce Certified)) , Disposable Sterile Powder Free Gloves For Eye Surgeries Size 7.5 ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 6 No ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 6.5 No ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 6.5 No ( Surgicare) , Disposable Surgical Gloves 7 No ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 7 No ( Surgicare) , Disposable Surgical Gloves 7.5 No ( (Isi/Iso/Ce Certified)) , Disposable Syringe 20 Ml With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringe 50 cement concrete With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 1 Ml (23G) ( (Isi/Iso/Ce Certified)) Ribbon Pack , Disposable Syringes 1 Ml With 26 No. Needle ( (Isi/Iso/Ce Certified))Ribbon Pack , Disposable Syringes 50 Ml. With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 10 Ml. With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 2 Ml With 23 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 2 Ml With 23 No. Needle ( Romsons) , Disposable Syringes 2 Ml With 24 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 2 Ml With 24 No. Needle ( Romsons) , Disposable Syringes 3 Ml With 23 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 3 Ml With 24 No. Needle (( Romsons) , Disposable Syringes 5 Ml With 23 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 5 Ml With 23 No. Needle ( Romsons) , Double Blood Bags 350 Ml , Drape Sheet For Cssd 2 X2 Mtr. Cotton Cloth Grey Color ( (Isi/Iso/Ce Certified)) , Drape Sheet For Cssd 2 X2 Mtr. Cotton Cloth Grey Color ( Romsons) , Drapes With Drainage Bag 100X80 Cm Double Layered Pre Cut ( (Isi/Iso/Ce Certified)) , Draw Sheet/ Ot Sheet, 2 Mtr , Dyna Plast Adhesive Tape ( 10 Cm Width, 5 Cm Length) Isi Marked &Gmp Certified , Ecg Electrodes (Neonate) ( (Isi/Iso/Ce Certified)) , Ecg Electrodes Adult (Disposable Kit Pack Of 6) ( (Isi/Iso/Ce Certified)) , Ecg Electrodes Pediatric (Disposable Kit Pack Of 6) ( (Isi/Iso/Ce Certified)) , Ecg Paper 50 Mm*20 Mtr, Roll ( (Isi/Iso/Ce Certified)) , Ecg Paper 50 Mm*30 Mtr, Roll ( (Isi/Iso/Ce Certified)) , Ecg Paper 60 Mm* 15 Mtr, Roll ( (Isi/Iso/Ce Certified)) , Ecg Paper 80Mm*15,20,30Mtr Roll ( (Isi/Iso/Ce Certified)) , Ecg Roll Big ( (Isi/Iso/Ce Certified)) , Ecg Roll Small ( (Isi/Iso/Ce Certified)) , Ecg Paper 215 Mm*20 Mtr, Roll (Bionet Cardiocare-2000 Model) , Ecg Paper A4 Size (Edan Machine) , Ecg Paper Recording Paper 210 Mm*20 Mtr, Roll (Bpl Cardiart-9108 Model) , Ecg Paper Recording Paper 210 Mm*300Mm*200 Sheet ( Bpl Machine Model -Cardiart 9108) , Endotrocheal Tube 2 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 2.5 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 3 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 6.5 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 7 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 7 Cuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 7.5 Cuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 3.5 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 4 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 5 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 5.5 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 6 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 8 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube( All Sizes) Cuffed (Iso9001, Ce Marked& Gmp Certified) , Endotrocheal Tube( All Sizes) Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Epidural Set , Eustachian Tube Cathetor ( (Isi/Iso/Ce Certified)) , Eustachian Tube Cathetor ( (Isi/Iso/Ce Certified)) , Examination Gloves All Sizes (Wt Min. 4.5 Gm Per Piece) ( (Isi/Iso/Ce Certified)) , Eye Drapes (Sheet) 80X70 Cm Pre Cut (Romsons) , Eye Drapes (Sheet) 80X70 Cm Pre Cut (Appasamy) , Eye Drapes (Sheet)100X80 Cm Pre- Cut (Romsons) , Eye Drapes (Sheet)100X80 Cm Pre- Cut (Appasamy) , Eye Wipes (Sterilized) ( (Isi/Iso/Ce Certified)) , Fixer For X-Ray To Make 13.5 Ltr. Solution ( (Isi/Iso/Ce Certified)) , Fluorescein Strips For Eye ( Appaswamy) , Foleys Catheter 10 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 12 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 14 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 16 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 18 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 8 ( (Isi/Iso/Ce Certified)) , Fuji X-Ray Films 10X12 Dry ( (Isi/Iso/Ce Certified)) A Pack Of 100 Rate Per Pack , Fuji X-Ray Films 11X14 Dry ( (Isi/Iso/Ce Certified))A Pack Of 100 Rate Per Pack , Fuji X-Ray Films 14X17 Dry ( (Isi/Iso/Ce Certified))A Pack Of 100 Rate Per Pack , Fuji X-Ray Films 8X10 Dry ( (Isi/Iso/Ce Certified))A Pack Of 100 Rate Per Pack , Green Blade 45 Degree ( Appaswamy) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Eliptical Pores Mesh 15.5 Cm X 8.5Cm (Pack Of 100) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Eliptical Pores Mesh 25 Cm X 10 Cm , (Pack Of 100) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Eliptical Pores Mesh 6.5 Cm X 5 Cm (Pack Of 100) , Guide Wire Teflon Coated V Straight Tip ( (Isi/Iso/Ce Certified)) , Gulde Wire For Interlocking/Dhs ( (Isi/Iso/Ce Certified)) , Hard Cervical Collar (Universal) Size (Isi/Iso/Ce Certified) , Hydro Dissection Cannula 26 No ( (Isi/Iso/Ce Certified)) , Hydro Dissection Cannula 27 No ( (Isi/Iso/Ce Certified)) , Hydrodisection Cannula ( (Isi/Iso/Ce Certified)) , Hydrophobic Acrylic Foldable Iols ( Aciol)In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +1.0 Ds To +30 Ds ( Appasamy) , I.V. Cannula 16 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 18 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 20 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 22 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 24 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 26 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 28 ( (Isi/Iso/Ce Certified)) , I.V. Flow Regulator Extension Sets ( (Isi/Iso/Ce Certified)) , I.V.Sets Disposable With Air Vent ( (Isi/Iso/Ce Certified)) , I.V.Sets Disposable With Air Vent ( Romsons) , Infant Feeding Tube 4 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 5 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 6 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 7 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 8 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 9 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube All Sizes ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube All Sizes (Iso9001, Ce Approved& Gmp Certified)) , K-90 Catheter ( (Isi/Iso/Ce Certified)) , Karman/ Mtp Cannula All Sizes, Single Unit (Iso 9001,Ce Approved& Gmp Certified) , Karman/ Mtp Cannula No. 6, Single Unit ( (Isi/Iso/Ce Certified)) , Karman/ Mtp Cannula No. 7, Single Unit ( (Isi/Iso/Ce Certified)) , Karman/ Mtp Cannula No. 8, Single Unit ( (Isi/Iso/Ce Certified)) , Kellys Pad (Isi/Iso/Ce Certified) , Kurta, Petticoat Sets Large Size , Green Strip , Lacrymal Cannula ( (Isi/Iso/Ce Certified)) , Lacrymal Cannula ( Romsons) , Lead Goggle ( (Isi/Iso/Ce Certified)) , Leuco Reduction Blood Filter Set For Blood Bank Use , Legaclip Size Lt 300 ( (Isi/Iso/Ce Certified)) , Legaclip Size Lt 400 ( (Isi/Iso/Ce Certified)) , Legging Each Leg Poplin 40 X 40 Cms. Green Color Bottom Closed , Lense Cleaner Paper ( (Isi/Iso/Ce Certified)) , Long G Sterile Single Use NeedleS 16G X 1.5 (1.6 X 38 Mm) ( (Isi/Iso/Ce Certified)) , Long G Sterile Single Use NeedleS 18G X 1.5 (1.25 X 38 Mm) ( (Isi/Iso/Ce Certified)) , Long G Sterile Single Use NeedleS 21G X 1.5 (0.8 X 38 Mm) ( (Isi/Iso/Ce Certified)) , Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 15 Cm X 15 Cm (3 Foils In Each Box) ( (Isi/Iso/Ce Certified)) , Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 6 Cm X 11 Cm (3 Foils In Each Box) ( (Isi/Iso/Ce Certified)) , Malicoat Catheter 4 Wings ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 10X12 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 12X15 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 14X14 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 14X17 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 8X10 ( (Isi/Iso/Ce Certified)) , Mekentosh Rubber Per Meter (Iso9001& Isi Standard) , Merocel Nasal Dressing 10 cement concrete ( (Isi/Iso/Ce Certified)) , Merocel Nasal Dressing 8 cement concrete ( (Isi/Iso/Ce Certified)) , Micro Drip Set(Iso9001,Ce&Gmp Approved) , Micropore 1/2 ( (Isi/Iso/Ce Certified)) , Micropore/Surgical Paper Tape 25Mm X 9.1Mtr.(Iso,Ce& Gmp Certified) , Micropore/Surgical Paper Tape 50Mm X 9.1 Mtr.(Iso9001,Ce& Gmp Certified) , Micropore/Surgical Paper Tape 75Mm X 9.1 Mtr.(Isi/Iso/ Ce Marked) , Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 5X 6 Cm ( (Isi/Iso/Ce Certified)) , Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 7X 9 Cm ( (Isi/Iso/Ce Certified)) , Mr Cannula All Sizes ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 5 ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 6 ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 7 ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 8 ( (Isi/Iso/Ce Certified)) , Mucous Suction Trap ( (Isi/Iso/Ce Certified)) , Multilayer Tissue Seprating Polyglecaprone Mesh (Polydioxanone And Macroporous Polypropylene) 10Cm X 15 Cm Oval (1 Foil In Each Box) For Lap Of Hernia ( (Isi/Iso/Ce Certified)) , Multilayer Tissue Seprating Polyglecaprone Mesh (Polydioxanone And Macroporous Polypropylene) 15Cm X 15 Cm Square (1 Foil In Each Box) For Lap Of Hernia ( (Isi/Iso/Ce Certified)) , N-95 Masks ( (Isi/Iso/Ce Certified)) , Nasal Prongs (Paeditric) ( (Isi/Iso/Ce Certified)) , Nasal Prongs (Neonantal) ( (Isi/Iso/Ce Certified)) , Nasal Prongs Term & Preterm Single Patient Use With Twin Bore Nasal Pronges Sets, Extra Soft Medical Grade Nasal Tips ( (Isi/Iso/Ce Certified)) , Nebulisation Set (Mask With Tubing With Chamber (Adult ) ( (Isi/Iso/Ce Certified)) , Nebulisation Set (Mask With Tubing With Chamber (Paediatric ) ( (Isi/Iso/Ce Certified)) , Negative Suction Catheter ( (Isi/Iso/Ce Certified)) , Negative Suction Drain No. 16 ( (Isi/Iso/Ce Certified)) , Negative Suction Drain No.14 ( (Isi/Iso/Ce Certified)) , Negative Suction Drain No.18 ( (Isi/Iso/Ce Certified)) , Niv Mask (Vented With Full Face Mask) , Nrm Mask With Reservior Bag( (Isi/Iso/Ce Certified)) , Nsv Set ( (Isi/Iso/Ce Certified)) , Opsite Eye Drape Sheet 70 Cm X 70 Cm ( (Isi/Iso/Ce Certified)) , Opsite Eye Drape Sheet 70 Cm X 70 Cm ( Appasamy) , Ortho Cotton Roll 15Cmx3mm ( (Isi/Iso/Ce Certified)) , Ot Gown Poplin Length 130 X 135 Cms ArmS Length 58 X 60 Back Open Type With Provision Of Tying With String At Back Arm Should Have Elasting Cuff Or Cord For Tying At Cuff End. The Inside Of Gown Should Be Inter Lock So That There Are No Loose Threads ( (Isi/Iso/Ce Certified)) , Ot Linen Cotton White 88X88 Cm. With Hole Size 9 X 10 Cm. In Centre And Should Be Folded And Stitched So There Are No Loose Ends. ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 130 X 180 (With Circular Hole Of Size 10 Diameters In Centers Green Color) ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 140 X 210 ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 140 ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 140 (With Circular Hole Of Size 10 Diameters In Centers Green Color) ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 90 ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 90 (With Oval) ( (Isi/Iso/Ce Certified)) , Ot Sponges With Radio-Opaque Thread (With 8 Layers 30 Cm X 30 Cm ) ( (Isi/Iso/Ce Certified)) , Oxygen Connector Both Side Tube ( (Isi/Iso/Ce Certified)) , Oxygen Mask Adult ( (Isi/Iso/Ce Certified)) , Oxygen Mask Medium ( (Isi/Iso/Ce Certified)) , Oxygen Mask Ped. ( (Isi/Iso/Ce Certified)) , Oxygen Tubing, Suction Tubing (Different Colours) ( (Isi/Iso/Ce Certified)) , Oxygen Venti-Mask (Pvc/Disposable)Adult ( (Isi/Iso/Ce Certified)) , Oxygen Venti-Mask (Pvc/Disposable)Medium ( (Isi/Iso/Ce Certified)) , Oxygen Venti-Mask (Pvc/Disposable)Paed. ( (Isi/Iso/Ce Certified)) , Paraffin Gauze , Patient Identification Band Adult Size (Different Colours) ( (Isi/Iso/Ce Certified)) , Patient Identification Band Mother & Child Size (Different Colours) ( (Isi/Iso/Ce Certified)) , Patient Identification Band Paediatric Size (Different Colours) ( (Isi/Iso/Ce Certified)) , Pciol- Non-Foldable (All Powers As Per Requirement) (Appasamy) , Pedeatrics Iv Drip Set With Air Vent ( (Isi/Iso/Ce Certified)) , Pedia Set ( (Isi/Iso/Ce Certified)) , Picc Line 24 G, 28 G ( (Isi/Iso/Ce Certified)) , Pillow Cover Cotton Size:48 X 70 Cm, Color - Blue , Pillow Cover Cotton Size:48 X 70 Cm, Color - Green , Pillow Cover Cotton Size:48 X 70 Cm, Color - Indigo , Pillow Cover Cotton Size:48 X 70 Cm, Color - Orange , Pillow Cover Cotton Size:48 X 70 Cm, Color - Peach , Pillow Cover Cotton Size:48 X 70 Cm, Color - Violet , Pillow Cover Cotton Size:48 X 70 Cm, Color - White , Pillow Cover Cotton Size:48 X 70 Cm, Color - Yellow , Plaster Of Paris Bandages 10 Cm X 2.7 Mtrs ( (Isi/Iso/Ce Certified)) High Strength , Plaster Of Paris Bandages 15 Cm X 2.7 Mtrs ( (Isi/Iso/Ce Certified)) High Strength , Plaster Spatula ( (Isi/Iso/Ce Certified)) , Pmo Line ( (Isi/Iso/Ce Certified)) , Polyglactin (Plain) Vicryl Usp-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polyglactin (Plain) Vicryl Usp-1, 90 Cm X 40 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polyglactin (Plain) Vicryl Usp-3-0, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 26 Mm 1/2 Circle, Type Of Needle- Oval Round Body ( (Isi/Iso/Ce Certified)) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 31 Mm 1/2 Circle, Type Of Needle- Round Body Medium Half Circle ( (Isi/Iso/Ce Certified)) , Polymide Suture Usp 0, 1.5 M X 40 Mm Half Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polymide Suture Usp 3-0, 70 Cm X 26 Mm, 3/8Circle Type Of Needle- Reverse Cutting ( (Isi/Iso/Ce Certified)) , Polypropylene Suture Usp -1, 70 Cm X 40 Mm, 1/2 Circle Type Of Needle- Heavy Round Bodied ( (Isi/Iso/Ce Certified)) , Polypropylene Suture Usp -2-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm , Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +1.0 Ds To +30 Ds ( Appasamy)) , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +1.0 D To +30 D ( Appasamy) , Ppe Kits ( (Isi/Iso/Ce Certified)) , Prolene Mesh 3X6 ( (Isi/Iso/Ce Certified)) , Prolene Mesh 4X6 ( (Isi/Iso/Ce Certified)) , Prolene Mesh 6X6 ( (Isi/Iso/Ce Certified)) , Quadruple Blood Bags 450 Ml ( (Isi/Iso/Ce Certified)) , Reverse Pervention Syringe 10 Ml 3 Pc. ( (Isi/Iso/Ce Certified)) , Reverse Pervention Syringe 5 Ml 3 Pc. ( (Isi/Iso/Ce Certified)) , Ryles Tube 10 ( (Isi/Iso/Ce Certified)) , Ryles Tube 12 ( (Isi/Iso/Ce Certified)) , Ryles Tube 14 ( (Isi/Iso/Ce Certified)) , Ryles Tube 16 ( (Isi/Iso/Ce Certified)) , Ryles Tube 8 ( (Isi/Iso/Ce Certified)) , Ryles Tube All Sizes ( (Isi/Iso/Ce Certified)) , Sanitary Napkin ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 22 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 23 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 24 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 26 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. All Sizes ( (Isi/Iso/Ce Certified)) , Short G Sterile Single Use NeedleS 21G X 1.0 (0.8 X 25 Mm) ( (Isi/Iso/Ce Certified)) , Side Port 15 Degree (Antiglare) Green Blade (Appasamy) , Side Port 45 Degree (Antiglare) Green Blade (Appasamy) , Silk Sutupak (Non Absorable Black Braided Silk Suture) Usp 1, 2* 75 Mm , 1/2 Circle R B Needle ( (Isi/Iso/Ce Certified)) , Silk Sutupak Usp 1, 75 Cm ( (Isi/Iso/Ce Certified)) , Silk Suture Usp 0, 76Cm X 45 Mm , 3/8 Circle Type Of Needle- Reverse Cutting ( (Isi/Iso/Ce Certified)) , Silk Suture Usp 3-0, 90 Cm X 16 Mm , 3/8 Circle Type Of Needle- Cutting ( (Isi/Iso/Ce Certified)) , Silk Usp 4-0, With Cutting Needle ( (Isi/Iso/Ce Certified)) , Simyl Mct Oil (Medium Chain Triglycerides And Permitted Antioxidants (Tocopherol Accetate) ( (Isi/Iso/Ce Certified)) , Single Blood Bags 350 Ml ( (Isi/Iso/Ce Certified)) , Skin Stapler Standard ( Single Unit) ( (Isi/Iso/Ce Certified)) , Skin Traction Set Small Size ( (Isi/Iso/Ce Certified)) , Small Cotton Rolls For Isolation Isi/ Iso/Ce/Marked(Length-37Mm, Dia-8-10Mm) , Soft Roll Dressing (Cast Padding) 4 ( (Isi/Iso/Ce Certified)) , Soft Roll Dressing (Cast Padding) 6 ( (Isi/Iso/Ce Certified)) , Spc Set (Suprapubic Catheter Set) ( (Isi/Iso/Ce Certified)) , Spinal Needle 23 ( (Isi/Iso/Ce Certified)) , Spinal Needle 25 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 18 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 22 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 24 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 26 ( (Isi/Iso/Ce Certified)) , Sterile Cotton Pad Packed ( (Isi/Iso/Ce Certified)) , Sterile Gauze Piece Packed ( (Isi/Iso/Ce Certified)) , Sterile Single Use NeedleS 23G X 1 (0.6 X 25 Mm) ( (Isi/Iso/Ce Certified)) , Suction Catheter No. 10 , Single Unit ( (Isi/Iso/Ce Certified)) , Suction Catheter No. 16 , Single Unit ( (Isi/Iso/Ce Certified)) , Suction Cathetor No. 12 ( (Isi/Iso/Ce Certified)) , Suction Cathetor No. 14 ( (Isi/Iso/Ce Certified)) , Suction Plain Catheter No. , 8 Disposable Pyrogen Free ( (Isi/Iso/Ce Certified)) , Suction Plain Catheter No. 6, Disposable Pyrogen Free ( (Isi/Iso/Ce Certified)) , Suction Set ( (Isi/Iso/Ce Certified)) , Suction Tips (Different Sizes No: 2, 3, 4) ( (Isi/Iso/Ce Certified)) , Surgical Blades 21 ( (Isi/Iso/Ce Certified)) , Surgical Blades 24 ( (Isi/Iso/Ce Certified)) , Surgical Blades11 ( (Isi/Iso/Ce Certified)) , Surgical Blades15 ( (Isi/Iso/Ce Certified)) , Surgical Blades20 ( (Isi/Iso/Ce Certified)) , Surgical Blades23 ( (Isi/Iso/Ce Certified)) , Surgical Stiching Needle All Sizes (Doctor) ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size 2-0, ½ Circle R.B. Needle ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size1-0, ½ Circle R.B. Needle ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Monofilament) 70 Cm X 31 Mm, Size -2-0, ½ Circle Round Bodied Needle ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Synthetic) Polyglactin 90 Cm X 30 Mm, Size -2-0, ½ Circle Round Bodied Needle ( (Isi/Iso/Ce Certified)) , Suture Catgut 2 No Round Body Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Coated Polyester No. 5 ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 26 Mm, Size -3-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 30 Mm, Size -2-0, 1/2 Circle Round Body Needle ,3 Metre ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -1-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -2-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 90 Cm X 30 Mm, Size -0, 1/2 Circle , Heavy Taper Cut Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) , Size -3-0, 1/2 Circle R B Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) ,1.5 Metre , 76 Cm X 16 Mm, Size -4-0, 3/8 Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) ,2 Metre , 90 Cm X 26 Mm, Size -3-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 2Metre , 90 Cm X 16 Mm, Size -3-0, 3/8 Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Nylon, Usp 1-0 , Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Nylon, Usp 2-0 , Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Tegaderm 2, 3/8 Inch*2.3/4 Inch 6*7 Cm Tegaderm Tm Films Iv Transparent Film Iv Transparent Film Dressing Style(Latex Free) ( (Isi/Iso/Ce Certified)) , Tegaderm Water Proof Dressing ( (Isi/Iso/Ce Certified)) , Temephos 50% Larvicide As Per Standard Of Latest Govt. Guidelines ( (Isi/Iso/Ce Certified)) , Thera Bands (All Colour) ( (Isi/Iso/Ce Certified)) , Three Way Canula , Towel 56 X 115 Cms. White Color, Soft , Full Size, Sperior Quality , Tracheostomy Tubes, Size 28 (Mettalic) ( (Isi/Iso/Ce Certified)) , Tracheostomy Tubes, Size 30 (Mettalic) ( (Isi/Iso/Ce Certified)) , Tracheostomy Tubes, Size 32 (Mettalic) ( (Isi/Iso/Ce Certified)) , Triple Blood Bags 450 Ml( (Isi/Iso/Ce Certified)) , Triple Blood Bags With Sagm 450 Ml ( (Isi/Iso/Ce Certified)) , Triple Layer Mask ( (Isi/Iso/Ce Certified)) , Triple Layer Single Piece Disposable Mask ( (Isi/Iso/Ce Certified)) , Triway (Three Way Stop Clock) Lipid Resistant Pyrogen Free, Sterile, Latex Free ( (Isi/Iso/Ce Certified)) , Ultrasound Jelly 200 Ml Bottle ( (Isi/Iso/Ce Certified)) , Umbilical Catheter No. 5, (5 Fr Length 37 Cm, -31Ml/Min Pvc ( (Isi/Iso/Ce Certified)) , Umbilical Catheter No. 6 (6 Fr Length 37 Cm, -31Ml/Min Pvc ( (Isi/Iso/Ce Certified)) , Umbilical Cord Cutting Scissor ( (Isi/Iso/Ce Certified)) , Uretheral Catheter ( R-90) , Under Pad/ Molinea Sheet , Urine Bag 2000Ml ( (Isi/Iso/Ce Certified)) Rate Of Single Piece , Uro Bag (Neonates)- 100 Ml ( (Isi/Iso/Ce Certified)) , Uro Bag (Paed.) ( (Isi/Iso/Ce Certified)) , Ventuary Mask ( (Isi/Iso/Ce Certified)) , Yankur Suction Set , Zigzag Ortho Cotton Soft Roll 4 Inches 100 Gm.( (Isi/Iso/Ce Certified)) , Zigzag Ortho Cotton Soft Roll 4 Inches 100 Gm.( (Isi/Iso/Ce Certified)) , Zigzag Ortho Cotton Soft Roll 6 Inches 100Gm.( (Isi/Iso/Ce Certified)) , Zigzag Ortho Cotton Soft Roll 6 Inches 300Gm.( (Isi/Iso/Ce Certified)) , Absolute Alcohol 70% 500Ml (Isi/Iso/Ce Certified)Rate Of One Bottle , Absolute Ethanol 99.9% Pure (Testing Solution) 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Acetone 500 Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Albumin Kit 5X50ml (Isi/Iso/Ce Certified)Rate Of One Pack , Alkaline Phosphatase Kit Liquix-M 6X6 Ml (Isi/Iso/Ce Certified)Rate Of One Pack , Amylase Kit 4*10Ml (Isi/Iso/Ce Certified)Rate Of One Pack , Amylase Kit 6*6Ml (Isi/Iso/Ce Certified)Rate Of One Pack , Anti A+B+D Igg/Igm+ Ab 4 X 12 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Reagents Anti-Ab Serum 1X5 Ml ( (Isi/Iso/Ce Certified)) , Anti Ab 1 X 10Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti Abd Kit 10 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti-A, Anti-B. Anti- D Sera A Pack Of 1X10 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti D Igg/Igm 1 X 10Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti D Anti Sera (Monocolonal) 1 X 5Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti-A1 (Lectin) Serum 1X5 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Antihuman Globulin Serum1x5 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Antibiotic Zone Scale , Aso Test 1X100 Test ( (Isi/Iso/Ce Certified))Rate Per Pack Of 100 , Aso Test Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Bacillocid (Dimethanol And Glutaraldehyde Conc.) Sterilization Slountion, 500Ml , Balance Salt Solution (Bss Solution For Eye) Clearsol 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Bilirubin Kit 4X60ml ( (Isi/Iso/Ce Certified))Rate Per Kit , Bio Medical Waste Dustbin Trolley With Frame 16 Litre (3 Bin Set) Ss Heavy Duty Frame (Isi/Iso/Ce Certified) , Bio Medical Waste Dustbin Trolley With Frame 16 Litre (4 Bin Set) Ss Heavy Duty Frame (Isi/Iso/Ce Certified) , Bio Medical Waste Dust Bin 10 Ltr Plastic (First) Body (Blue Black Yellow Red) ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 10 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 20 Ltr Plastic (First) Body (Blue Black Yellow Red) , Bio Medical Waste Dust Bin 20 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 32 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 50 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Waste Poly Bag Hd/Ldpe Bag As Per Bmw Rules 2016 Thickness More Than 50 Micron/200 Gz, Non-Chlorinated,Ist Quality/Fresh Material With Printing Bio Hazard Logo,Hospital Use And Haryana Govt Supply Not For Sale (Yellow, Red, Black, Blue) Size-14X17/19X26/25X38/24X24 All Sizes (Per Kg) , Bio Hazard Sticker 4.5X4 Cm. Rate Per Sticker , Bleaching Powder 1 Kg Packing Grade 1 (Isi/Iso/Ce Certified) Rate Of 1 Kg.,Shelf Life More Than 6 Months , Bleaching Powder 25 Kg Packing Grade 1 Hdpe Bag Powder Form Minimum Chlorine Availability 34% (Isi/Iso/Ce Certified) Rate Of 25 Kg. Bag ,Shelf Life More Than 6 Months , Bloating Paper For Lab Use ( (Isi/Iso/Ce Certified) Rate Per Bloating Paper , Blood Agar100gm( (Isi/Iso/Ce Certified) Rate Of 100 Gm Pack , Blood Culture Bottle 50 Ml (Isi/Iso/Ce Certified))Rate Of One Bottle , Blood Glucose Kit 2X200ml ( (Isi/Iso/Ce Certified) Rate Per Pack 2*200Ml , Blood Grouping Rapid Card ( (Isi/Iso/Ce Certified) Rate Per Card , Blood Lancet 1 X 50 ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 50 Lancets , Blood Lancet 1 X 100 ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Lancets , Blood Urea Kit 20Mlx5 ( (Isi/Iso/Ce Certified))Rate Per Kit , Borosil Reagent Bottle ( (Isi/Iso/Ce Certified) Rate Of One Bottle , Bovine Albumin 22% Sol. A Pack Of 1X10 Ml( (Isi/Iso/Ce Certified))Rate Of One Pack , Brain-Heart Infusion Agar 100Gm ( (Isi/Iso/Ce Certified)) Rate Of 100 Gm. Pack , Brain-Heart Infusion Broth 100Gm ( (Isi/Iso/Ce Certified) Rate Of 100 Gm. Pack , Capillery Tubes For Bt/Ct A Pack Of 1X100 Rate Per Pack Of 100 Capillary Tubes , Carbol Fuschin Stain (Ziehl-Neelsen) Hi-Media , Carbol Fuchsin Powder 25 Gm (Isi/Iso/Ce Certified)) , Carbolic Acid 400Gm.(Isi/Iso/Ce Certified)) , Cedar Wood Oil 125 G ( (Isi/Iso/Ce Certified) Rate Of One Bottle , Cefoxitin For Swab Culture Rate Per Unit , Cello Tape (White) Size- 2 Inch Rate Of Single Cello Tape , Cello Tape (Brown) Size- 4 Inch Rate Of Single Cello Tape , Chlorhexidine Gluconate 4% Spray 60Ml ( (Isi/Iso/Ce Certified) Rate Per 60Ml Pack , Chlorhexidine Gluconate+ Cetrimide Antiseptic Liquid 250 Ml Bottle ( (Isi/Iso/Ce Certified) Rate Of One Bottle , Chlorine 0.5 Gm Pellets (Drinkwell) Packing 1000 Fda/ Iso/Gmp Certified , Rate Of 1000 Pellets, Shelf Life At Least One Year , Chocolate Agar 100Gm ( (Isi/Iso/Ce Certified) Rate Per Pack , Cholestrol Kit 5 X 20Ml ( (Isi/Iso/Ce Certified) Rate Per Pack , Citrate Medium 100Gm (Isi/Iso/Ce Certified) Rate Per Pack , Cleaning Solution Kit For Easylyte Na/K/Ck Rate Per Pack , Cled Medium 100Gm ( (Isi/Iso/Ce Certified) Rate Of 100Gm. , Coplin Jar Rate Of Single Jar , Copper Sulphate 500Gm ( (Isi/Iso/Ce Certified) Rate Of 500 Gm. Pack , Cover Slips Square A Pack Of 20X10 Gm Blue Star Rate Of Single Pack , Coverslip (English Glass) Size: 22 X 50Mm ( (Isi/Iso/Ce Certified))Rate Per Slip , Coverslip (English Glass) Size: 24 X 50Mm ( (Isi/Iso/Ce Certified))Rate Per Slip , Coverslip (English Glass) Size: 24 X 60Mm ( (Isi/Iso/Ce Certified))Rate Per Slip , Cpkmb Kit 2*8 /2*2 Ml( (Isi/Iso/Ce Certified)) Rate Per Pack , Creatinine Kit 4X60ml ( (Isi/Iso/Ce Certified))Rate Per Pack , Crom Agar 100Gm( (Isi/Iso/Ce Certified))Rate Per Pack , Crp Kit 1X10 Ml ( (Isi/Iso/Ce Certified))Rate Per Pack , Crp Kit Slide Method Qualitative ( (Isi/Iso/Ce Certified))Rate Per Pack , Crp Rapid Card ( (Isi/Iso/Ce Certified)) Rate Per Card , Crystal Violet 100 Gm. , Culture Tube With Swab Stick Rate Per Culture Tube With Swab Stick , Cyphenothrin 5% Ecs (Insecticide/Adulticide For Fogging) As Per Govt Guidelines 1 Litre (Bayer) , Decalcifying Reagent ( (Isi/Iso/Ce Certified)) , Deltamethrin 2.5%, Wp 25 Kg , Dengue Elisa Kit 48 Test ( Isi/Iso/Ce Certified))Rate Per Pack , Dengue Elisa Kit 48 Test J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Dengue Elisa Kit 48 Test ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) Rate Per Pack , Dengue Elisa Kit 96 Test ( (Isi/Iso/Ce Certified)) , Dengue Elisa Kit 96 Test ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Per Pack , Dengue Elisa Kit 96 Test J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Dengue Rapid Test Card Ns1 (Single Test) ( (Isi/Iso/Ce Certified)) Rate Per Card , Diamond Pencil Marker Standard Quality Rate Per Piece , D - Dimer Vial (Isi/Iso/Ce Certified) , Distilled Water (Dionised) 1 Litre ( (Isi/Iso/Ce Certified))Rate Per Pack , Distilled Water (Zero Tds) 5 Litre ( (Isi/Iso/Ce Certified))Rate Per Pack , Dpx Mounting Media 250Ml Each , Dropping Bottle 100Ml ( (Isi/Iso/Ce Certified)) , Dropping Bottle 250Ml ( (Isi/Iso/Ce Certified)) , Dodecylbispropylene Triamine 9.2Gm, Didecyldimethyl Ammonium Chloride 13.0 Gm For Fogging (Isi/Iso/Ce Certified) , Durhams Tube A Pack Of 1X100 Rate Per Pack , Drumsticks (Isi/Iso/Ce Certified) , Edta 17% Paste Form ( (Isi/Iso/Ce Certified)) , Eeg Paste , Elisa Covid -19 Kit A Pack Of 96 Tests (As Per Icmr/ Niv) (Isi/Iso/Ce Certified)) Rate Per Pack , Elisa Covid -19 Kit A Pack Of 48 Tests (As Per Icmr/ Niv) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Elisa Hbv Kit 96Test 3Rd Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hbv Kit 96Test 3Rd Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hbv Kit 96Test 4Th Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hbv Kit 96Test 4Th Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hcv Kit 96Test 3Rd Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hcv Kit 96Test 3Rd Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hcv Kit 96Test 4Th Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hcv Kit 96Test 4Th Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hiv Kit 96Test 3Rd Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hiv Kit 96Test 3Rd Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hiv Kit 96Test 4Th Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hiv Kit 96Test 4Th Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Eosin Powder 1X25 Gm. Rate Per Pack (Isi/Iso/Ce Certified) , Esr Pipette Rate Per Pipette (Isi/Iso/Ce Certified) , Ethanol Spray 70% , Fields Stain ( (Isi/Iso/Ce Certified)) , Filter Paper (Whatman)(A Pack 1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Filter Paper (Whatman)(A Pack 1X50) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Filter Paper No. 1 (A Pack 1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Fluorescein Stain ( (Isi/Iso/Ce Certified)) , Fobt Card ( (Isi/Iso/Ce Certified) Rate Per Card , Formalin Solution 37-40% Buffered 500Ml ( (Isi/Iso/Ce Certified)) Rate Of One Bottle , Formalin Solution 37-40% Buffered 5 Litre ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Funnel 3 Inch ( (Isi/Iso/Ce Certified))Rate Of One Funnel , GeimsaS Stain Solution Bottle ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Giemsa Stain ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Glacial Acetic Acid 3.5% Solution 500 Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Glass Beaker 50 Ml (Borosil) Rate Of Single Beaker , Glass Beaker 100 Ml (Borosil) Rate Of Single Beaker , Glass Beaker2 50 Ml (Borosil) Rate Of Single Beaker , Glass Beaker 500 Ml (Borosil) Rate Of Single Beaker , Glass Funnel (Borosil) Rate Of Single Funnel , Glass Cleaner 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Glass Slide Cabinet (1000 Slide Storage Capacity) ( (Isi/Iso/Ce Certified)) , Glass Slides , A Pack Of 50 Slides ( (Isi/Iso/Ce Certified)) Rate Of 50 Slides Pack , Glutraldehyde Solution 2 % - 2.5 %, 1 Ltr (Isi/Iso/Ce Certified) , Glucometer (Dr.Morpen ,Model-Bg03) , Glucometer Strips (Dr.Morpen ,Model- Bg03) ( Rate Per Strip) , Glucometer Cell (Dr.Morpen ,Model-Bg03) , Glucometer (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) , Gluco Strips (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) ( Rate Per Strip) , Glucometer Cell (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) , Glucometer (Accu Chek) , Gluco Strips (Accu Chek) A Pack Of 2X50 Strips ( Rate For Pack Of 2X50 Strips) , Glucometer Cell (Accu Chek) , Glycerol 100Ml (Isi/Iso/Ce Certified) , Graduated Glass Measuring Cylinder ( 1000Ml) ( (Isi/Iso/Ce Certified)) , Graduated Glass Measuring Cylinder (500Ml ) ( (Isi/Iso/Ce Certified)) , Gram Stain 100Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Gram Stain Kit ( (Isi/Iso/Ce Certified) Rate Of One Kit , Gram Stain Kit ( Hi-Media))Rate Of One Kit , Hand Sanitizer 400 Ml (Isi/Iso/Ce Certified) , H& E Stain (Harris) Powder Hi-Media Rate Of One Pack , Haemoglobin Meter (Round) Manual ( (Isi/Iso/Ce Certified)) , Haemoglobin Meter (Sqaure) Manual ( (Isi/Iso/Ce Certified)) , Haemoglobin Meter Glass Tube (Round) ( (Isi/Iso/Ce Certified)) , Haemoglobin Meter Glass Tube (Sqaure) ( (Isi/Iso/Ce Certified)) , Haemostatic Tournique (Isi/Iso/Ce Certified) , Hav Card ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hb Meter Digital Portable With One Year Replacement Warranty ( Sensa Core) , Hb Meter Strips (Sensa Core Hb Digital Portable Meter ) Rate Per Strip , Hb Meter Digital Portable With One Year Replacement Warranty (Mission) , Hb Meter Strips ( Mission) Rate Per Strip , Hb Pipette ( (Isi/Iso/Ce Certified))Rate Of One Pipette , Hba1c Turbosmart ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hbsag + Hiv + Hcv Rapid Card (Combo) ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hbsag 96 Test Elisa ( (Isi/Iso/Ce Certified)) Rate Of One Kit , Hbsag 96 Test Elisa ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor )) Rate Of One Kit , Hbsag Card ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hbsag Card ( Aspen) Rate Of One Card , Hbsag Tridot Rapid Card ( J.Mitra)) Rate Of One Card , Hbsag Card Extra Sensitive ( (Isi/Iso/Ce Certified)) , Hcl N/10 500Ml ( (Isi/Iso/Ce Certified)) Rate Of One Bottle , Hcl Concentrated 500 Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Hcv & Hiv Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Hcv Rapid Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Hcv Rapid (Single Test Card) ( Aspen))Rate Of One Card , Hcv Tridot ( (Isi/Iso/Ce Certified))Rate Of One Card , Hcv Tridot ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Of One Card , Hcv, Hiv, Hbsag, Syphilis Card 4 In 1 ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv 1/2 Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv Card Retroquic Flow Through Method ( (Isi/Iso/Ce Certified)) , Hiv Rapid (Single Test Card) ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv Rapid (Single Test Card) ( Aspen))Rate Of One Card , Hiv Tridot ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv Tridot ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Of One Card , Hiv Complete Safe Kit ( (Isi/Iso/Ce Certified))Rate Of One Safe Kit , Hiv+Syphillis Combo ( (Isi/Iso/Ce Certified)) , Holder Lancet (Single Use/Single Packing)) ( (Isi/Iso/Ce Certified))Rate Of One Holder Lancet , Ice Gel Pack 100Gram Rate Of Single Ice Gel Pack , I.O Dye (Rhex Id Dye) Each (Indigo Blue Dye)Rate Of Single Dye , Immersion Oil For Microscopy, 100X Lens (Heavy Grade) A Pack Of 30Ml(( (Isi/Iso/Ce Certified))Rate Of One Pack , Immersion Oil For Microscopy, 100X Lens A Pack Of 30Ml (Hi-Media))Rate Of One Pack , Isopropyl Alcohol 500 Ml For Lab Use ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Isopropyl Alcohol Based Handwash Solution 5 Ltr. , Isopropyl Alcohol Based Handwash Solution 500 Ml , Jsb Stain I 250Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Kimberlay Clark Tissue Paper Rate Of One Packet , Lead Pencil / Cautery Pencil (Isi/Iso/Ce Certified) , Leishman Stain ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Liquid Hand Wash Soap 5 Litre (Safe For Skin)Isi/Iso/Gmp Certified , Macconkey Brouth 500Gm (Purple) Rate Of Pack 500Gm. , Macconky Agar 100Gm ( (Isi/Iso/Ce Certified))Rate Of Pack 100Gm. , Malicot Tube 28 No. Rate Of One Tube (Isi/Iso/Ce Certified) , Malaria Antigen Card (Isi/Iso/Ce Certified))Rate Of One Card , Malaria Antigen Card J.Mitra ( (Isi/Iso/Ce Certified))Rate Of One Card , Malaria Parasite Kit ( (Isi/Iso/Ce Certified)) Rate Of One Kit , Malaria Pcr Kit Himedia( (Isi/Iso/Ce Certified)) Rate Of One Kit , Malaria Pan Elisa 96 Test ( (Isi/Iso/Ce Certified)) Rate Of One Kit Of 96 Tests , Malathion 50% Ec, 1 Ltr (Isi/Iso/Ce Certified) , Malathion Technical 95%, 25 Kg (Isi/Iso/Ce Certified) , May Grunwald Stain Solution Bottle 125Ml( (Isi/Iso/Ce Certified))Rate Of One Bottle , Mct Rack ( (Isi/Iso/Ce Certified)) , Methanol 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Methylene Blue Alkaline ( (Isi/Iso/Ce Certified)) Rate Of One Pack , Mgg Stain ( (Isi/Iso/Ce Certified)) , Micro Centrifuge Tube 2Ml Sterile A Pack Of 1X500 (Tarson ) Rate Per Pack Of 500 , Microcuvettes (Model- Haemocue Hb 301, Hb Meter), ( Rate Per Single Microcuvettes) , Micro Pipette 0- 50 Microlitre ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Pipette 10 Ul To 100 Ul ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Pipette 2 Ul To 20 Ul ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Pipettes 20Ul To 200Ul ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Slides ( (Isi/Iso/Ce Certified)) Rate Of One Pack , Microscope Optical Lens Cleaning Solution ( (Isi/Iso/Ce Certified)) Rate Of One Pack , Microtips (2 Ul-200 Ul)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Of One Pack Of 1000 , Microtips 0 - 200 Microliters (Small) A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Microtips 20 - 1000 Microliters (Large)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Microtips 200 Ul To 1000 Ul A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Microtips Box (2 Ul-200 Ul)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Of Per Pack Of 1000 , Microtips Box (200 Ul-1000 Ul)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Mi-Fog(Disinfectant Liquid For Fogging Machine) Benzalkonium Chloride 13.6%W/V,Didecyl Dimethyl Ammonium Chloride 13%W/V,Poly Hexa Methlene Biguanide Hcl 5.0%W/V, 5Th Generation Qac For Ot,Icu,Nicu& Other Critical Areas , 1 Litre , Mineral Trioxide Aggregate Isi/ Iso/Ce/Marked. Rate Of One Pack , Mini-Shaker For Immunology ( (Isi/Iso/Ce Certified))Rate Of One Pack , Mx Vial (Montux Vial) Rate Per Vial , Muller Hilton Agar 100Gm ( (Isi/Iso/Ce Certified))Rate Of One Pack , Muller Hilton Agar Plate ( (Isi/Iso/Ce Certified))Rate Of One Plate , Multi Drug Test Kit (Panel Of 6) ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (8 Channal) ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (8 Channal Variable Value 2-20Ul) Thermo Fischer ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (12 Channal) ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (12 Channal) Thermo Fischer ( (Isi/Iso/Ce Certified)) , Multidrug Test Kit Of 10 Parameter ( (Isi/Iso/Ce Certified)) Rate Of One Kit , Multidrug Test Card 10 Parameter ( (Isi/Iso/Ce Certified)) Rate Of One Card , Multi-Sample Vacutainer Luer-Lok Access Adapters ( (Isi/Iso/Ce Certified)) , Multi-Sample Vacutainer Routine Blood Collection Sterile Single Use Needles (21G X 1Inch)(0.8 X 25/32Mm) ( (Isi/Iso/Ce Certified)) , Multi-Sample Vacutainer Routine Blood Collection Sterile Single Use Needles (22G X 1Inch)(0.7 X 25/32Mm) ( (Isi/Iso/Ce Certified)) , Nutrient Agar Media 100 Gm ( (Isi/Iso/Ce Certified))Rate Of One Pack , Objective ( Oil Immersions 100X) ( (Isi/Iso/Ce Certified))Rate Of One Pack , Objective ( Oil Immersions 10X) ( (Isi/Iso/Ce Certified))Rate Of One Pack , Objective ( Oil Immersions 40X) ( (Isi/Iso/Ce Certified))Rate Of One Pack , O- Toludine Reagent (Isi/Iso/Ce Certified) A Pack Of 500Ml Rate Per Bottle , Pap Stain Kit (Isi/Iso/Ce Certified) Rate Per Kit , Pap Stain Kit J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor (Isi/Iso/Ce Certified) Rate Per Kit , Paraffin Wax Small Cubes ( (Isi/Iso/Ce Certified))Rate Of One Pack , Parafilm Width2 Inch & Length 250 Feet ( (Isi/Iso/Ce Certified))Rate Of One Pack , Paraldehyde Solution For Sterlization ( (Isi/Iso/Ce Certified))Rate Of One Pack , Pasteur Pipette(Transfer Pipette) Capacity 1Ml ( (Isi/Iso/Ce Certified)) , Peptone Water 100Gm ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Permanent Marker 10 Pieces Per Pack Black/Blue Colour Rate Per Pack , Petridish Diameter 90Mm* Height 15 Mm Sterile ( (Isi/Iso/Ce Certified)) Rate Of Single Unit , Ph Meter Digital ( (Isi/Iso/Ce Certified)) Rate Per Meter , Ph Paper (1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 , Ph Testing Strips For Water Seven Quality Test (1X50) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 50 , Ph Testing Strips For Water Quality Test (1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 , Phenol 2% A Pack Of 500 Ml (Isi/Iso/Ce Certified)) Rate Per Pack , Phenol 40% A Pack Of 5 Litre (Isi/Iso/Ce Certified)) Rate Per Pack , Phenol Crystal A Pack Of 500Gram (Isi/Iso/Ce Certified)) Rate Per Pack , Phenyl Surface Disinfectant,Floor Cleaner Liquid 5 Litre , White Colour ( (Isi/Iso/Ce Certified)) , Phenyl Surface Disinfectant,Floor Cleaner Liquid 5 Litre( Black Colour) ( (Isi/Iso/Ce Certified)) , Pipette Shaker ( (Isi/Iso/Ce Certified)) , Plaintube Glass 18*150 Mm, 27 Ml ( (Isi/Iso/Ce Certified)) Rate Of One Glass Tube , Plaintube Plastic 18*150Mm ,27 Ml( (Isi/Iso/Ce Certified)) Rate Of One Plastic Tube , Plaintube Plastic ( (Isi/Iso/Ce Certified)) Rate Of One Plastic Tube , Plastic Tube For Dengue Testing( (Isi/Iso/Ce Certified)) Rate Of One Plastic Tube , Plastic Container For Storing Buffered Formalin 5Litres ( (Isi/Iso/Ce Certified)) , Plastic Spatula ( (Isi/Iso/Ce Certified)) , Plastic Cane 5 Litre White Rate Per Cane , Plastic Cane 5 Litre Black Rate Per Cane , Plastic Bottle 1 Litre For Tb Programme Rate Per Bottle , Plastic/ Glass Jars For Storage Of Specimens With Fixative (50Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (100Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (200Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (500Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (1000Ml Capacity) ( (Isi/Iso/Ce Certified)) , Platelet Diluting Fluid ( (Isi/Iso/Ce Certified)) , Potash Alum 1X500gm. Rate Per Pack , Podophylline Resin Solution 10% To 25% ( (Isi/Iso/Ce Certified)) , Pot. Dichromate ( (Isi/Iso/Ce Certified)) , Prefilled Automated Extraction Kits (For Thermo Scientifix For Kingfisher Flex Automated Extraction System ,96 Well) Rt-Pcr Lab , Pregnancy Test Kit ( (Isi/Iso/Ce Certified)) Rate Of Single Kit , Pregnancy Test Card ( (Isi/Iso/Ce Certified)) Rate Of Single Card , Pregnancy Strips ( (Isi/Iso/Ce Certified)) Rate Of Single Strip , Pyrethrum Extract 2% (Isi/Iso/Ce Certified) , Q-Way 6 Inches ,Sterlized Using Ethylene Oxide ( (Isi/Iso/Ce Certified)) , R A Factor Rapid Card ( (Isi/Iso/Ce Certified)) Rate Of Single Card , Ra Factor Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rapid Afb Stain Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rapid Antigen Test Card (Covid) ( (Isi/Iso/Ce Certified)) Rate Of Single Card , Rapid Cytochrome/Modified Rapid Leishman Stain ( (Isi/Iso/Ce Certified)) , Rapid Geimsa Stain Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rapid H & E Stain Kit ( (Isi/Iso/Ce Certified)) , Rbc Diluting Fluid ( (Isi/Iso/Ce Certified)) , Ria Vials Glass 1X100(Isi/Iso/Ce Certified)) Rate Of 100 Vials Packing , Ria Vials Plastic 12X40mm 1X500(Isi/Iso/Ce Certified)) Rate Of 500 Vials Packing , Rpr/Vdrl Kit (50 Test Each) ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rpr/Vdrl Kit (100 Test Each) ( S D Biosensor)Rate Of Single Kit , Rubber Teats Rate Per Piece , Rubber Gloves For Lab Use Rate Per Pair , Simyl Mct Oil (Medium Chain Triglycerides And Permitted Antioxidants (Tocopherol Accetate) (Isi/Iso/Ce Certified) , S. Calcium Kit A Pack Of 2X50 Ml( (Isi/Iso/Ce Certified))Rate Of Single Kit , S. Cholesterol Kit A Pack Of 5X30ml ( (Isi/Iso/Ce Certified))Rate Of Single Kit , S. Phosphorus Kit A Pack Of 2X50ml( (Isi/Iso/Ce Certified))Rate Of Single Kit , S. Protein Kit 5X50 ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Salt Testing Kit ( (Isi/Iso/Ce Certified)) Rate Per Kit , Sample Cups With Lid & Sticker 30Ml ( (Isi/Iso/Ce Certified)) , Saturated Picric Acid Solution ( (Isi/Iso/Ce Certified)) , Sda Agar 100Gm ( (Isi/Iso/Ce Certified)) , Self Polymerizing Acrylic Liquid (Isi/Iso/Ce Certified) , Self Polymerizing Acrylic Powder (Isi/Iso/Ce Certified) Pink , Semen Diluting Fluid ( (Isi/Iso/Ce Certified)) , Serum Pti Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Serum Seperate Tube A Pack Of 1X100 Rate Per Pack , Sgot Kit 20Mlx05 ( (Isi/Iso/Ce Certified)) , Sgpt Kit 20Mlx05 ( (Isi/Iso/Ce Certified)) , Sharp Container 1.5 Litre, White ( (Isi/Iso/Ce Certified)) , Sharp Container 6 Litre, White ( (Isi/Iso/Ce Certified)) , Sharp Container 10 Litre, White ( (Isi/Iso/Ce Certified)) , Slide Mountant Dpx ( (Isi/Iso/Ce Certified)) , Slide Carrying Tray (20 Slide Capacity) ( (Isi/Iso/Ce Certified)) , Slide Labelling Stickers/Tape Roll ( (Isi/Iso/Ce Certified)) , Slide Staining Racks Aluminium( (Isi/Iso/Ce Certified)) , Slide Storage Box (100 Slide Capacity) ( (Isi/Iso/Ce Certified)) , Slide Tissue Adhesive(Hydophillic Slides) (Egg Albumin) ( (Isi/Iso/Ce Certified)) , Sodium Citrate 3.8% A Pack Of 500 Ml Rate Per Pack , Sodium Hypochloride 5% Solution 5 Ltr ( (Isi/Iso/Ce Certified)) , Sod. Hypochloride 400 Ml (Idc) , Sodium Hypochlorite Solution 10% 5 Ltr ( (Isi/Iso/Ce Certified)) , Sodium Phosphate Dibasic (Na2hpo4) Buffer ( (Isi/Iso/Ce Certified)) , Sodium Phosphate Monobasic (Nah2po4) Buffer ( (Isi/Iso/Ce Certified)) , Sodalime Crystal (Isi/Iso/Ce Certified) , Solution Pack For Easylyte Na/K/Cl , Spirit Lamp , Sulphuric Acid Con. 500 Ml ( (Isi/Iso/Ce Certified))Rate Per Bottle , Sulphuric Acid Solution 20% V/V (( (Isi/Iso/Ce Certified)) , Sulphur Powder 1X500gm. Rate Per Pack (Isi/Iso/Ce Certified) , Sputum Cup With Lid & Sticker 30Ml ( (Isi/Iso/Ce Certified)) , Sputum Cup With Lid 50Ml & Sticker ( (Isi/Iso/Ce Certified)) , Sputum Cup Carrier Box( (Isi/Iso/Ce Certified)) , Adhesive Label For Sputum Cup A Pack Of 1X100 Pieces , Surgical Spirit Bp 500Ml ( (Isi/Iso/Ce Certified)) Rate Per Bottle , Surgical Spirit Bp 5Ltr ( (Isi/Iso/Ce Certified))Rate Per Bottle , Sugar Sucrose A Pack Of 500Gm. (Isi/Iso/Ce Certified) , Sugar Maltose A Pack Of 500Gm.(Isi/Iso/Ce Certified) , Swab Sticks 100 Pcs. Rate Of 100 Sticks , Tcbs Agar100gm ( (Isi/Iso/Ce Certified)) , Tds Meter Digital , Rate Per Tds Meter , Test Tube Glass (150 X 16) A Pack Of 1X12 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Glass (150 X 20) A Pack Of 1X12 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Glass (80Mmx10mm) A Pack Of 1X12 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Plastic Pack Of 1X48 Tubes ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Rack 18 Hole (Plastic)(Isi/Iso/Ce Certified) , Test Tube Rack 18 Hole (Ss)(Isi/Iso/Ce Certified) , Test Tube Rack 96 Test Plastic(Isi/Iso/Ce Certified) , Test Tube Rack 96 Test Ss(Isi/Iso/Ce Certified) , Test Tubes Brush (Isi/Iso/Ce Certified) , Thermal Printing Roll For Urine Analyzer And Cbc 57/58Mm Size , Thermol Roll 57Mm ,50Mm Rate Per Roll(Isi/Iso/Ce Certified) , Thermocol Box Size 18.5X12.5X13 Cm. , Thphoid (Igg + Igm) Card ( (Isi/Iso/Ce Certified)) Rate Per Card , Thphoid (Igm) Card ( (Isi/Iso/Ce Certified))Rate Per Card , Tissue Paper Roll Double Ply Length 30 Metres Width 30 10 Cm. Rate Of Single Roll , Tourniquet Superior Quality ( (Isi/Iso/Ce Certified)) Rate Per Piece , Triglyceride Kit 2X50ml Erba Rate Of Single Kit , Triple Sugar Iron Test (Tsi) 100Gm , Trop I Kit A Pack Of ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Troponin Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Tryptan Blue Dye ( (Isi/Iso/Ce Certified)) , Tubes Dispoables 12X100 Mm. A Pack Of 100 Tubes Rate Per Pack , Tube Racks (10 Ml Vials)(Isi/Iso/Ce Certified) , Tube Racks (5Ml Vials)(Isi/Iso/Ce Certified) , Tuberack 18*150 Mm (Isi/Iso/Ce Certified) , Turp Loop ( (Isi/Iso/Ce Certified))(Isi/Iso/Ce Certified) , Twin Bucket 10 Litre Grade One Plastic Body(Isi/Iso/Ce Certified) , Twin Bucket 20 Litre Grade One Plastic Body(Isi/Iso/Ce Certified) , Urease Medium 100Gm ( (Isi/Iso/Ce Certified)) , Uric Acid Kit 5X50ml ( (Isi/Iso/Ce Certified))Rate Of Pack , Urine Containers With Lid & Sticker (50Ml Capacity) ( (Isi/Iso/Ce Certified)) , Urine Containers With Lid & Sticker (50Ml Capacity) A Pack Of 1X100 Non-Sterile ( (Isi/Iso/Ce Certified)) Rate Of Pack , Urine Containers With Lid & Sticker 30Ml Non Sterile ( (Isi/Iso/Ce Certified) , Urine Containers With Lid & Sticker 30Ml Sterile ( (Isi/Iso/Ce Certified) , Urine Droppers 5 Ml ( A Pack Of 1X100) Rate Of Pack , Multisticks Urine Analysis Reagent Strips 2 Parameter(Albumin & Sugar) (1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Strips , Multisticks Urine Analysis Reagent Strips 10 Parameter ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Strips , Multisticks Urine Analysis Reagent Strips 10 Parameter Bayer ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Strips , Vaccuame Needle ( (Isi/Iso/Ce Certified)) , Vaccutainers Sodium Citrate 3.2% (2.7 Ml) (Non - Vaccum)A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Gel Yellow Cap,A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Lithium Heparin (Green Top) Tube (Non-Vaccum) 6 Ml A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Lithium Heparin (Green Top) Tube (Vaccum) 3 Mla Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Needle ( (Isi/Iso/Ce Certified)) , Vacutainer Needle Holder ( (Isi/Iso/Ce Certified)) , Vacutainer Safety-Lok Pediatric Blood Collection Set With Pre-Attached Holder ( (Isi/Iso/Ce Certified)) , Vacutainer Sodium Heparin (Green Top) Tube (Non-Vaccum) 3 Ml A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Sodium Heparin (Green Top) Tube (Non-Vaccum) 6 Ml A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Stretch Torniquet ( (Isi/Iso/Ce Certified)) , Vacutainer Tubes Purple/Lavender Topped (K2 Edta) 2 Ml Capacity (Size Of Tube:13 X 75Mm), Vaccum Based Tubea Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Tubes Violet/Purple/Lavender Topped (K2 Edta) 0.5 Ml Capacity (Size Of Tube:12 X 55/56 Mm), Screw Cap Pediatric Microtainer/Microcapillary/Mini Blood Collection Tubea Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Tubes Violet/Purple/Lavender Topped (K2 Edta) 1 Ml Capacity (Size Of Tube:12 X 55/56 Mm), Screw Cap Pediatric Microcapillary/Mini Blood Collection Tubea Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Tubes Violet/Purple/Lavender Topped (K2 Edta) 1.3 Ml Capacity (Size Of Tube:12 X 55/56 Mm), Screw Cap Pediatric Microcapillary/Mini Blood Collection Tube A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Edta (Non -Vaccum) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Edta (Vaccum Tubes) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Florides (Vaccum Tubes) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Plain /Clot Activator A Pack Of 1X100 (Vaccum Tubes) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers (For Pus Collection) Rate Per Vacutainer(Isi/Iso/Ce Certified) , Vacutainers Plain /Clot Activator A Pack Of 1X100 ( Non-Vaccum Tubes) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate (Vaccum Tubes, ) (For Esr 1.6 Ml)( Black Top) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate 3.2% (2.7 Ml) (Vaccum Tubes) A Pack Of 1X100 (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate 3.8% (Black Top)Vaccum Tube A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate 3.8% (Black Top) Tube A Pack Of 1X100 ( Non-Vaccum Tubes) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vdrl (Syphilis Kit Elisa 96 Test) ( (Isi/Iso/Ce Certified)) Rate Per Kit , Vdrl (Syphilis Kit Elisa 96 Test) (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Per Kit , Vdrl Strips A Pack Of 100 Strips (Isi/Iso/Ce Certified)) Rate Per Strip , Vdrl Rapid Card( (Isi/Iso/Ce Certified)) Rate Per Card , Vtm Kit With Oral And Nasal Swab Pair (As Per Icmr Guidelines) Rate Per Vtm Kit , Vtm Media Rate Per Single Piece , Vtm Vial Rack , Wash Bottles Glass 500Ml Rate Per Bottle , Wash Bottles Plastic 500Ml Rate Per Bottle , Water Sample Bottles Glass 250Ml Rate Per Bottle , Water Sample Bottles Glass (Borosil) 250Ml Rate Per Bottle , Water Sample Bottles Glass 500Ml Rate Per Bottle , Water Sample Bottles Glass (Borosil)500Ml Rate Per Bottle , Wbc Diluting Fluid 100 Ml ( (Isi/Iso/Ce Certified)) , White Petroleium Jelly 100 %20 Gm Jar( (Isi/Iso/Ce Certified)) , White Petroleium Jelly 100 % 500 Gm Jar( (Isi/Iso/Ce Certified)) , Widal Kit 5X4 Ml ( (Isi/Iso/Ce Certified))Rate Per Kit , Wooden Tips 6 A Pack Of 1X100 Rate Per Pack , Xylene 1X500ml ( (Isi/Iso/Ce Certified)) Rate Per Pack , Auto Analyser Thermal Paper Role (57 Mmx30m) (Erba) , Automated Extraction Kits (For Thermo Scientifix For Kingfisher Flex Automated Extraction System ,96 Well) Rt-Pcr Lab , Autoclave Biohazard Bag (12X24) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 1X100 , Autoclave Biohazard Bag (14X19) ( (Isi/Iso/Ce Certified) Rate Per Pack Of 1X100 , Autoclave Biohazard Bag (24X30) ( (Isi/Iso/Ce Certified) Rate Per Pack Of 1X100 , Cryo Vails 1.8 Ml A Pack Of 1X1000 (Tarson) Rate Per Pack Of 1X1000 , Cryo Marker ( (Isi/Iso/Ce Certified)) , Cryo Tags A Pack Of 1X1000 (Tarson) Rate Per Pack Of 1000 , Film Applicator , Genemag Viral Dns/Rna Purification Kit (400 Plate 96 Preps) Rate Per Box , Mct Rack (Tarson) Rate Per Rack , Microseal B Adhesive Seal (Pcr Seal) Biorad ( Rate Of Single Piece) , Pcr Cap Strips A Pack Of 1X120 (Bio-Rad)( Rate Per Pack Of 1X120 ) , Pcr Plates A Pack Of 1X50 (Bio-Rad , Plastic Case Mounted ) ( Rate Of Pack Of 1X50) , Pcr Seals A Pack Of 1X100 (Bio-Rad ) ( Rate Per Pack Of 1X100 )) , Pcr Tube Strips (Bio-Rad) A Pack Of 1X120( Rate Of Pack 1X120) , Qpcr Adhesive Seal ( Thermo / Brand /Biolinkk /Ils) ( Rate Of Single Piece) , Qpcr Plates 96 Well ( Thermo /Brand/ Biolinkk /Ils) , Racked Sterile Filtered Microtips(Low Retention) 1000Ul Tarson Rate Per Box Of 1X960 , Racked Sterile Filtered Microtips(Low Retention) 100Ul Tarson Rate Per Box Of 1X960 , Racked Sterile Filtered Microtips(Low Retention) 10Ul/20Ul Tarson Rate Per Box Of 1X960 , Racked Sterile Filtered Microtips(Low Retention) 200Ul Tarson Rate Per Box Of 1X960 , Rt-Pcr Kits 96 Well Plate (Bio Rad) Rate Per Box , Thermal Printing Roll For Urine Analyzer And Cbc 57/58Mm Size Rate Per Roll , Thermol Roll 57Mm ,50Mm Rate Per Roll , Plastic Pallet ,Hdpe, Size(1200*1000*60 Mm) ( (Isi/Iso/Ce Certified)) , Pm Kit For Di Plant 7-10 Liter Per Hr (Model: 165935) , Am Kit For Di Plant (Model: 165935) , Pm Kit For Em200 , Elite 580 Calibrator 1X3 Ml , 4 Channel Ise Cleaning Solution - 5421 (6X12ml) (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Reagent Pack @35 Spd Cal A-520 Ml/ Cal B-190 Ml (Total 710 Ml)(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ada1 X 20 Ml/1 X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ada Cali1 X 1 M L (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ada Control1 X 1 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Albumin 5 X 22 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Alkaline Phosphatase5 X 22 Ml/5X 6.8 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Amylase 5X11 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Direct 5 X 22 Ml/5X 6.8 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Direct Plus 6 X 44 Ml/6 X 12.3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Total 5 X 22 Ml/5X 6.8 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Total Plus 6 X 44 Ml/6 X 12.3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Calcium (A) 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Chloride 10 X 12 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Cholesterol 5 X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ck Mb 2 X 12 Ml/2X 3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ck Nac 2 X 12 Ml/2X3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Control H (Aso/Rf/Crp) 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Control L (Aso/Rf/Crp) 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Creatinine-Enzymatic 5 X 30 Ml /5 X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Creatinine-Jaffe 5 X 44 Ml/5X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Erba Autowash - System Pack 10 X 100 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Erba Norm 4 X 5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Erba Path 4 X 5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Fe 125 R1-4 X 25 Ml, R2-2 X 12.5 Ml Calibrator: 2 X 2 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin 2 X 14.5/2 X 7.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin Calibrator 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin Control High 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin Control Low 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Gamma Gt 2 X 22 Ml / 2 X 6.8 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Glucose (God-Pod) 10 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Glucose Hexokinase - Uv 5 X 44 Ml/5X 12.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Hba1c Cali Set 5 X 0.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Hba1c Con H 1X 0.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Hdl Cholesterol With Calibrator 4 X 30 Ml/4 X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ldh P 2 X 44 Ml/2X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ldl Cholesterol With Calibrator 2 X 30 Ml/2X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Lipase Xl 1 X 44 Ml/1X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Magnesium 2 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Micro Albumin Control 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Micro Albumin With Cal 1 X 5 Ml/2X 25 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Microprotein With Cal 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Phosphorus 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgot El Mini 2X 22 Ml/2X 6.9 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgot-Hl Small System Pack 5 X 22 Ml/5X 11.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgpt-El Mini 2 X 22 Ml/2X 6.9 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgpt Hl Small System Pack 5 X 22 Ml/5X 11.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Total Protein 10 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Total Protein (Two Reagents) 4 X 34 Ml/4 X 17 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Total Protein Small System Pack 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Triglycerides - 5X 11 Ml/5X4 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Uibc 125R 1-4 X 25 Ml, R 2-2 X 12.5 Ml,Calibrator: 2X 2 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Urea 5 X 44 Ml/5X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Uric Acid 5 X 22 Ml/5X 6.8 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl Aso Turbilatex Withcalibrator (Ita) 1 X 22 Ml/1X 5.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Autowash Ac/Al Kit5 X 44 Ml/5 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Multical4 X 3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Rf Turbilatex Withcalibrator (Ita) 1 X 22 Ml/1X 5.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Crp-Turbilatex Withcalibrator (Ita) 2 X 22 Ml/2X 6.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl Hba1c With Cali Set2 X 15 Ml/2 X 5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Blood Diluent 20 Litre (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Fbh Lyse 500Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Fdti Lyse 500Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Fdoi Lyse 500Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Cbiquant- 5 Detergent 4X100ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Control Level-1 , 2.5Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Cbc Detergent Fluid (Urit-2900) , Cbc Diluent 20 Ltr (Urit-2900) , Cbc Lytic Fluid (Urit-2900) , Cbc Proclennor (Urit-2900) , Cleaner For Cell Counter Erba H-360, 50Ml. , Elisa Washer (Erba) , Elite H Clean, 50 Ml ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H5 Control H (3Ml) ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H5 Control L (3Ml) ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H5 Control N (3Ml)( Transasia Erba Machine Model - Elite 580 , Proprietry)) , Elite H580 Diluent, 20Litres ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H580 Lyse 1, 500Ml ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H580 Lyse 2, 500Ml ( Transasia Erba Machine Model - Elite 580 , Proprietry)) , Elite H580 Lyse 3, 1Litres ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Embedded O Rings 20Pieces (Erba) , Erba Calcium Chloride For Ecl 105 , Erba D-Dimer Calibrator Kit For Ecl 105 , Erba D-Dimer Kit For Ecl 105 , Erba Norm Kit , Erba Path Kit , Erba Protime Ls For Ecl 105 , Erba Single Reaction Cuvettes For Ecl 105 , Lyse For Cell Counter Erba H-360, 500Ml , Urinorm Controls (High, Low, Normal) For Erba Laura Urine Analyzer , Procleaner For C,B,C (Erba) , Quality Control Norm (For Semi Automatic Auto Analyser Erba) , Quality Control Path (For Semi Automatic Auto Analyser Erba) , Tissue Paper Lint Free Rate Per Roll , Hub Cutter Non Electrical Stainless Steel , Hub Cutter With Sharp Container Of 1 Lt Capacity Cutting Life Of Blade Is 5000 Minimum Ats. Blade Is Made Of Stainless Steel (156911 Of 1992) Thickness Of Blade Should Be 0.5 Mm {Astha} , O2 Flow Meter With Bottle (Isi/Iso/Ce Certified) , Nebulizers : A 120V, 60Hz Mono- Phase Electrical Source With Line Connection Plug Nema 5-15 Type. Protections Against Over-Voltage And Over-Current Line Conditions. {Bpl/Omron/Beurer} , Oxygen Flow Meter With Humidifier Bottle :Chromium Plated Brass Body, Metering Tube And Cover Made Of Polycarbonate Body, Flow Adjustment By Needle Valve Equipped With Inlet Filter-100 Um, Flow Rate 0-15 Liters Per Minute, Flush Flow 60 Litres Per Minute, Flow Read By The Centre Of The Ball, Inlet Pressure 60Psi; Humidifier Bottle: Lid Made Of Abs Plastic, Jar Made Of Unbreakable Poly Carbonate, Valve Pressure Brass Chromium Plated, It Should Be Steam Autoclaved/Gas Sterilized , Regular Stethoscope (Microtone) : Stethoscope Of Standard Size,Chromium Plated Metal Binaural, V Rubber Tube In One Piece. Rotating Piper Fitting For Both Flip Functions. , Stethoscope Daimond , Stethoscope Neonatal (Microtone) , Stethoscope Pediatric (Microtone) , Vtm Vial Rack (Tarson) Rate Per Rack , Waste Bag Sealing Ties , Weighing Machine Adult Manual Krups/ Suvrna , Weighing Machine Adult Digital {Bpl/Omron , B P Appartus Digital ( Omron ) , B P Appartus Digital ( Bpl) , B P Instrument( Conventinal, Led, Mercury Free) ( (Isi/Iso/Ce Certified)) , B P Instrument( Deluxe, Dial Type With Cuff ) ( Diamond) , B P Instrument( Clock Type Dial Size 6X6 Inch , Model -Bpdl237 ) ( Diamond Only) , Clinical Thermometer ,Oval ( (Isi/Iso/Ce Certified)) , Clinical Thermometer ,Digital ( Accusure) , Rectal Thermometer ,Prismatic ( (Isi/Iso/Ce Certified)) , Emergency First Aid Resucitation Kit) ( Adult) ( (Isi/Iso/Ce Certified)) , Emergency First Aid Resucitation Kit) ( Paediatric) ( (Isi/Iso/Ce Certified)) , First Aid Medicine Storage Box/Emergency Medical Box ,Plastic,Emergency Cabinet Oragniser ,Detachable Tray Medical Box& Partition Tray For Segregation, Item Package Quantity 6,White&Red Combination With Plus Sign Medicine Organiser,Handle With Lock (23.6Cm*15.3Cm*14Cm) ( (Isi/Iso/Ce Certified)) , First Aid Medico Box ,Plastic,Multiutility Storage Box With Handle, White, Closure Type Lock (235Cm*16Cm*14Cm) ( (Isi/Iso/Ce Certified)) , Height Measuring Scale(Floor Model Without Weighing Scale) ( (Isi/Iso/Ce Certified)) , Height Measuring Scale(Floor Model With Digital Weighing Scale) , Height Measuring Scale(Floor Model With Mechanical Weighing Scale) ( (Isi/Iso/Ce Certified)) , Height Measuring Scale(Wall Mounted) ( (Isi/Iso/Ce Certified)) , Home Isolation Kit Bag ( (Isi/Iso/Ce Certified)) , Infant Resuscitation Kit (Autoclavable ,Resuable,Infant Resuscitator&250Ml Silicone Bellow With Non Rebreathing Valve&Mask Size 00,01&360 Degree Swiveling Patient Connector With Standard 15 Mm/22Mm Diameter&Corrugated Pvc Oxygen Reservoir& 1.5 Metres Pvc Oxygen Tubing ( (Isi/Iso/Ce Certified)) , Infantometer(Height Measuring Scale Infant) ( (Isi/Iso/Ce Certified)) , Dcp Small Plate: 3.5Mm: All Holes Ss , Dcp Narrow Plate: 4.5Mm: All Holes Ss , Dcp Broad Plate: 4.5Mm: All Holes Ss , Dcp Small Reconstruction Plate: 3.5Mm: All Holes Ss , Dcp Reconstruction Plate: 4.5Mm: All Holes Ss , Dcp Small Reconstruction Plate-Curved: 3.5Mm: All Holes Ss , Lc-Dcp Small Plate:3.5Mm: All Holes Ss , Lc-Dcp Narrow Plate:4.5Mm: All Holes Ss , 5/8 Ring-100,120,140, 160Mm, Ss , 5/8 Ring-180,200,220,240,260Mm, Ss , annual periodical maintenance (Austinmooresprosthesis) Non-Sterile, [37Mmto55mm], Ss , annual periodical maintenance (Austinmooresprosthesis) Sterile, [37Mmto55mm], Ss , Bipolar Prosthesis [Non-Fenestrated]Sterile,[37Mmto55mm], Ss , Bipolar Prosthesis[Fenestrated]Sterile,[37Mmto55mm], Ss , Blade -50,60,70,80,90,100Mm, Degree-90º,100º,110º,120º,130º:, Ss , Boxes Panner, Ss , Bushing-20Mm, Ss , C.C.Screw 4.0Mmxf.Th.-,10Mmto60mm Ss , C.C.Screw 4.0Mmxp.Th.-,10Mmto60mm Ss , C.C.Screw 6.5Mm/7.0Mmx16th.-,40Mmto120mm Ss , C.C.Screw6.5Mm/7.0Mmxf.Th.-,40Mmto120mm Ss , Cancellous Schanz Pin6.5Mmx16th./32Th.-225Mm, Ss , Cancellous Screw 3.5Mm-,10Mmto50mm Ss , Cancellous Screw 4.0Mmxf.Th.-,10Mmto60mm Ss , Cancellous Screw 4.0Mmxp.Th.-,10Mmto60mm Ss , Cannulated Dril Lbit 125Mm-2.7,3.2Mm, Ss , Cannulated Drill Bit 225Mm-4.0,4.5Mm, Ss , Carbon Fiber Ring 100-240 Ss , Circlage Wire With Loop[16,18,20Gauge]-300Mm, Ss , Connecting Clamp, Ss , Connection Bolt-20Mm, Ss , Connection Plate With Threaded End All Holes, Ss , Cortical Screw 2.7Mm-,10Mmto30mm (Selftapping) Ss , Cortical Screw 4.5Mm-,All Sizes (Selftapping) Ss , Cortical Screw3.5Mm-,All Sizes (Selftapping) Ss , Curved Plate- All Sizes, Ss , Danham Pin(Centrallythreaded)4.5/5.0-225Mm, Ss , Dc T Plate: 4.5Mm:,All Sizes Ss , Dcp Angled Blade Plate For Intertrochantric Osteotomies:, Ss , Dcp Angled Blade Plate130ºblade:50,60,70,80,90,100Mm:,All Holes Ss , Dcp Calcaneal Plate: 3.5Mm: All Sizes Ss , Dcp Condylar Buttress Plate: 4.5Mm:(L/R): All Holes Ss , Dcp Condylar Plate9 5ºblade:50/60/70/80Mm: All Sizes Ss , Dcp Narrow Plate: 4.5Mm: All Sizes, Ss , Dcp Lateral Tibia Head Buttress Plate (L/R):4.5Mm: All Sizes Ss , Dcp Semi Tubular Plate: 4.5Mm: All Sizes Ss , Dcp Small Hook Plate:3.5Mm: All Sizes Ss , Dcp Small Plate: 3.5Mm:, All Sizes Ss , Dcp Small Reconstruction Plate: 3.5Mm: All Sizes Ss , Dcp Small Reconstruction Plate-Curved: All Sizes Ss , Dcp Small Tplate Oblique Angled: 3.5Mm:,All Sizes Ss , Dcp Small Tplate R/A: 3.5Mm: All Sizes Ss , Dcp1/3Rd Tubular Plate: 3.5Mm:,All Sizes Ss , Dcpl Buttress Plate: 4.5Mm:(L/R):,All Sizes Ss , Dcpt Plate: 4.5Mm: All Sizes Ss , Dcpy Reconstruction Plate: 3.5Mm:, All Sizes Ss , Dcs Barrel Plate95º:4.5Mm: All Holes Ss , Dhs Barrel Plate 130º/135º:L/B&S/B:4.5Mm: All Sizes Ss , Dhss Crew With Compression Screw, All Sizes Ss , Distractor 6.0Mm [150Mm,200,250Mm], All Sizes Ss , Double Pin Clamp (Deluxe), Ss , Drill Bit Plain All Sizes Ss , Drill Bit Quickcoupling All Sizes Ss , Drummond Wire All Sizes Ss , Dynametric Wire Tensioner, Ss , Elastic Nail All Sizes Ss , Enders Nail All Sizes Ss , Endobutton With Loop-Sterile All Sizes Ss , Endobutton, All Sizes Ss , Enders Nail All Sizes Ss , Helical Blade (Pfna-Ii):, All Sizes Ss , Herbert Screw Cannulated All Sizes Ss , Guide Wire- All Sizes Ss , Half Ring- All Sizes Ss , Hinge-Male,Female&90º, All Sizes Ss , Ilizarow K Wire Bayonet Point, All Sizes Ss , Instruments Set For Acl/Pcl Reconstruction, All Sizes Ss , Instruments Setwith Boxfor Herbert Screw, All Sizes Ss , Interference Screw-Cannulated All Sizes Ss , Interlocking Exper Tibia Nail, All Sizes Ss , Interlocking Humerus Nail: All Sizes Ss , Interlocking Sirus Femur Nail, All Sizes Ss , Interlocking Bolt All Sizes Ss , Interlocking Expert Humerus Nail:,[Cannulated] All Sizes Ss , Interlocking Expert Tibia Nail, All Sizes Ss , Interlocking Femur Nail,[Cannulated] All Sizes Ss , Interlocking Femur Nail, All Sizes Ss , Interlocking Guide Wire, All Sizes Ss , Interlocking Long Proximal Femur Nail135º[Left]/[Right], All Sizes Ss , Interlocking Short Proximal Femur Nail (Pfn) 130º/135º, All Sizes Ss , Interlocking Supra Condylar Nail Angled, All Sizes Ss , Interlocking Tibial Nail, All Sizes Ss , Interlocking Trochantric Proximal Femurnail (Tfn)135º, All Sizes Ss , Italian annual rate contract All Sizes Ss , K. Nail (Straight)- All Sizes Ss , K. Nail(Bent)- All Sizes Ss , K. Wire Double Ended Non Sterile All Sizes Ss , Lc-Dc Broad Plate: All Sizes Ss , Lc-Dcp Narrow Plate: All Sizes Ss , Lc-Dcp Small Plate:3.5Mm:, All Sizes Ss , Locking 1/3Rd Tubular Plate:3.5Mm:, All Sizes Ss , Locking Anterolateral Distal Tibial Plate:(L/R):, All Sizes Ss , Locking Broad Plate: 4.5/5.0Mm:, All Sizes Ss , Locking Calcaneal Plate: D Type:(L/R):, All Sizes Ss , Locking Calcaneal Plate: P Type:(L/R):, All Sizes Ss , Locking Calcaneal Plate:(L/R):, All Sizes Ss , Locking Cancellous Screw 3.5Mmxf.Th.-, All Sizes Ss , Locking Cancellous Screw 5.0Mmxf.Th.-, All Sizes Ss , Locking Clavicle Hook Plate: 3.5Mm:(L/R): All Sizes Ss , Locking Curved Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Ss , Locking Curved Reconstruction Plate: 3.5Mm:, All Sizes Ss , Locking Dhs Barrel Plate All Sizes Ss , Locking Distal Femu Rplate:(L/R):, All Sizes Ss , Locking Distal Fibula Plate: 3.5Mm:, All Sizes Ss , Locking Distal Humerus Plate Dorsolatera With Support: 2.7/3.5Mm:(L/R), All Sizes Ss , Locking Distal Humerus Plate Dorsolateral:2.7/3.5Mm:(L/R):, All Sizes Ss , Locking Distal Humerus Plate Medial:2.7/3.5Mm:(L/R):, All Sizes Ss , Locking Distal Radius (Head4/5Hole)Volarplate:2.7Mm/3.5Mm:(L/R): All Sizes Ss , Locking Distal Radius Volar Plate:3.5Mm:(L/R):, All Sizes Ss , Locking Extra-Articular Distal Humerus Plate:3.5Mm:(L/R):, All Sizes Ss , Locking Lateral Distal Fibula Plate:(L/R):, All Sizes Ss , Locking Lateral Tibial Plate:(L/R):, All Sizes Ss , Locking L-Buttress Plate: 4.5/5.0Mm: All Sizes Ss , Locking Medial Distal Tibial Plate With Tab:(L/R):, All Sizes Ss , Locking Medial Distal Tibial Plate:(L/R):, All Sizes Ss , Locking Medial Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Ss , Locking Medial Proximal Tibial Plate5.0Mm:(L/R): All Sizes Ss , Locking Narrow Plate: 4.5/5.0Mm:, All Sizes Ss , Locking Olecranon Plate: 3.5Mm:(L/R): All Sizes Ss , Locking Pelvic Curved Plate: 3.5Mm: All Sizes Ss , Locking Pelvic Plate: 3.5Mm: All Sizes Ss , Locking Philos Plate: 3.5Mm: All Sizes Ss , Locking Postero Medial Proximal Tibial Plate: All Sizes Ss , Locking Posterolateral Distal Fibula Plate:(L/R): All Sizes Ss , Locking Proximal Femur Plate:4.5/5.0Mm:(L/R): All Sizes Ss , Locking Proximal Humerus Plate:3.5Mm:, All Sizes Ss , Locking Proximal Tibia Plate 3.5Mm(Ztype):(L/R): All Sizes Ss , Locking Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Ss , Locking Proximal Tibia Plate 5.0Mm:(L/R): All Sizes Ss , Locking S-Clavicle Plate With Lateral Extension: 2.7/3.5Mm:(L/R):, All Sizes Ss , Locking S-Clavicle Plate: 3.5Mm:(L/R):, All Sizes Ss , Locking Screw 2.7Mm(S.T.)-, All Sizes Ss , Locking Screw 3.5Mm(S.T.)-, All Sizes Ss , Locking Screw 5.0Mm(S.T.)-, All Sizes Ss , Locking Small Plate: 3.5Mm:, All Sizes Ss , Locking Small Tplate Obliqueangeled:3.5Mm:(L/R): All Sizes Ss , Locking Small Tplate Rightangeled:3.5Mm:, All Sizes Ss , Locking Straight Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Ss , Locking Straight Reconstruction Plate:3.5Mm:, All Sizes Ss , Locking T-Buttress Plate: 4.5/5.0Mm: All Sizes Ss , Locking Tomo Fix Medial High Medial Plate (Osteotomy):3.5Mm:, All Sizes Ss , Malleolar Screw3.5Mm-, All Sizes Ss , Malleolar Screw4.5Mm-, All Sizes Ss , Mechanical Wire Tensioner, All Sizes Ss , Modular Bipolar Cup [Collar+3,0,-3], [Ball - All Sizes Ss , Modular Bipolar Stem [Small,Medium,Large], All Sizes Ss , Multipin Clamp, All Sizes Ss , Nut, All Sizes Ss , Nylonnut, All Sizes Ss , Olive Wire 400Mm, All Sizes Ss , Open Single Pin Clamp, All Sizes Ss , Paediatric Dhs Barrel Plate: 3.5Mm:, All Sizes Ss , Paediatric Dhss Crew With Compression Screw, All Sizes Ss , Pfn Bolt6.5Mm-, All Sizes Ss , Pfnbolt8.0Mm-, All Sizes Ss , Post Male/Female- All Sizes Ss , Proxima Femur Nail Antirotation (Pfna -Ii):Short:, All Sizes Ss , Proximal Femur Nail Antirotation (Pfna-Ii):Long:(L/R):, All Sizes Ss , Rush Nai All Sizes Ss , S.S. Wire-16,18,20,22,24Gauge, All Sizes Ss , Scahnz Pin All Sizes Ss , Schanz Pin Bolt, All Sizes Ss , Schanz Pin Introducer, All Sizes Ss , Single Pin Clamp (Deluxe), All Sizes Ss , Single Pin Clamp (Ordinary), All Sizes Ss , Sirus Nail Bolt All Sizes Ss , Small Spanner, All Sizes Ss , Spacing Washer, All Sizes Ss , Spiked Ligament Staple [Small&Large], All Sizes Ss , Spiked Ligament Washer, All Sizes Ss , Square Nail [Radius/Ulna] All Sizes Ss , Steinman Pin All Sizes Ss , Straight Plate All Sizes Ss , Suture Dis Cwasher, All Sizes Ss , Suture Discwith -Regular, All Sizes Ss , Suture Discwith -Conical, All Sizes Ss , Telescopic Rod All Sizes Ss , Thompsons Prosthesis Non-Sterile, All Sizes Ss , Thompsons Prosthesis Sterile, All Sizes Ss , Threaded Guide Wire- All Sizes Ss , Threaded K. Wire Double Ended - All Sizes Ss , Threaded Rod- All Sizes Ss , Threaded Rod-Slotted- All Sizes Ss , Threaded Socket- All Sizes Ss , Tibial Post Fixation Screw All Sizes Ss , Transverse Clamp, All Sizes Ss , Triple Trocarset, All Sizes Ss , Tubeto Tube Clamp, All Sizes Ss , Tubular Rod(Perinchrate), All Sizes Ss , Twin Adjustable Clamp-Curved, All Sizes Ss , Twin Adjustable Clamp-Straight, All Sizes Ss , Twisted Plate- All Sizes Ss , Washer (Slotted), All Sizes Ss , Wire Fixation Bolt-Slotted & Cannulated, All Sizes Ss , Wrenchoqube All Sizes Ss , K Wire Sterile Double All Sizes Ss , Dcp Small Plate: 3.5Mm: All Holes Titanium , Dcp Narrow Plate: 4.5Mm: All Holes Titanium , Dcp Broad Plate: 4.5Mm: All Holes Titanium , Dcp Small Reconstruction Plate: 3.5Mm: All Holes Titanium , Dcp Reconstruction Plate: 4.5Mm: All Holes Titanium , Dcp Small Reconstruction Plate-Curved: 3.5Mm: All Holes Titanium , Lc-Dcp Small Plate:3.5Mm: All Holes Titanium , Lc-Dcp Narrow Plate:4.5Mm: All Holes Titanium , 5/8 Ring-100,120,140, 160Mm, Titanium , 5/8 Ring-180,200,220,240,260Mm, Titanium , annual periodical maintenance (Austinmooresprosthesis) Non-Sterile, [37Mmto55mm], Titanium , annual periodical maintenance (Austinmooresprosthesis) Sterile, [37Mmto55mm], Titanium , Bipolar Prosthesis [Non-Fenestrated]Sterile,[37Mmto55mm], Titanium , Bipolar Prosthesis[Fenestrated]Sterile,[37Mmto55mm], Titanium , Blade -50,60,70,80,90,100Mm, Degree-90º,100º,110º,120º,130º:, Titanium , Boxes Panner, Titanium , Bushing-20Mm, Titanium , C.C.Screw 4.0Mmxf.Th.-,10Mmto60mm Titanium , C.C.Screw 4.0Mmxp.Th.-,10Mmto60mm Titanium , C.C.Screw 6.5Mm/7.0Mmx16th.-,40Mmto120mm Titanium , C.C.Screw6.5Mm/7.0Mmxf.Th.-,40Mmto120mm Titanium , Cancellous Schanz Pin6.5Mmx16th./32Th.-225Mm, Titanium , Cancellous Screw 3.5Mm-,10Mmto50mm Titanium , Cancellous Screw 4.0Mmxf.Th.-,10Mmto60mm Titanium , Cancellous Screw 4.0Mmxp.Th.-,10Mmto60mm Titanium , Cannulated Dril Lbit 125Mm-2.7,3.2Mm, Titanium , Cannulated Drill Bit 225Mm-4.0,4.5Mm, Titanium , Carbon Fiber Ring 100-240 Titanium , Circlage Wire With Loop[16,18,20Gauge]-300Mm, Titanium , Connecting Clamp, Titanium , Connection Bolt-20Mm, Titanium , Connection Plate With Threaded End All Holes, Titanium , Cortical Screw 2.7Mm-,10Mmto30mm (Selftapping) Titanium , Cortical Screw 4.5Mm-,All Sizes (Selftapping) Titanium , Cortical Screw3.5Mm-,All Sizes (Selftapping) Titanium , Curved Plate- All Sizes, Titanium , Danham Pin(Centrallythreaded)4.5/5.0-225Mm, Titanium , Dc T Plate: 4.5Mm:,All Sizes Titanium , Dcp Angled Blade Plate For Intertrochantric Osteotomies:, Titanium , Dcp Angled Blade Plate130ºblade:50,60,70,80,90,100Mm:,All Holes Titanium , Dcp Calcaneal Plate: 3.5Mm: All Sizes Titanium , Dcp Condylar Buttress Plate: 4.5Mm:(L/R): All Holes Titanium , Dcp Condylar Plate9 5ºblade:50/60/70/80Mm: All Sizes Titanium , Dcp Narrow Plate: 4.5Mm: All Sizes, Titanium , Dcp Lateral Tibia Head Buttress Plate (L/R):4.5Mm: All Sizes Titanium , Dcp Semi Tubular Plate: 4.5Mm: All Sizes Titanium , Dcp Small Hook Plate:3.5Mm: All Sizes Titanium , Dcp Small Plate: 3.5Mm:, All Sizes Titanium , Dcp Small Reconstruction Plate: 3.5Mm: All Sizes Titanium , Dcp Small Reconstruction Plate-Curved: All Sizes Titanium , Dcp Small Tplate Oblique Angled: 3.5Mm:,All Sizes Titanium , Dcp Small Tplate R/A: 3.5Mm: All Sizes Titanium , Dcp1/3Rd Tubular Plate: 3.5Mm:,All Sizes Titanium , Dcpl Buttress Plate: 4.5Mm:(L/R):,All Sizes Titanium , Dcpt Plate: 4.5Mm: All Sizes Titanium , Dcpy Reconstruction Plate: 3.5Mm:, All Sizes Titanium , Dcs Barrel Plate95º:4.5Mm: All Holes Titanium , Dhs Barrel Plate 130º/135º:L/B&S/B:4.5Mm: All Sizes Titanium , Dhss Crew With Compression Screw, All Sizes Titanium , Distractor 6.0Mm [150Mm,200,250Mm], All Sizes Titanium , Double Pin Clamp (Deluxe), Titanium , Drill Bit Plain All Sizes Titanium , Drill Bit Quickcoupling All Sizes Titanium , Drummond Wire All Sizes Titanium , Dynametric Wire Tensioner, Titanium , Elastic Nail All Sizes Titanium , Enders Nail All Sizes Titanium , Endobutton With Loop-Sterile All Sizes Titanium , Endobutton, All Sizes Titanium , Enders Nail All Sizes Titanium , Helical Blade (Pfna-Ii):, All Sizes Titanium , Herbert Screw Cannulated All Sizes Titanium , Guide Wire- All Sizes Titanium , Half Ring- All Sizes Titanium , Hinge-Male,Female&90º, All Sizes Titanium , Ilizarow K Wire Bayonet Point, All Sizes Titanium , Instruments Set For Acl/Pcl Reconstruction, All Sizes Titanium , Instruments Setwith Boxfor Herbert Screw, All Sizes Titanium , Interference Screw-Cannulated All Sizes Titanium , Interlocking Exper Tibia Nail, All Sizes Titanium , Interlocking Humerus Nail: All Sizes Titanium , Interlocking Sirus Femur Nail, All Sizes Titanium , Interlocking Bolt All Sizes Titanium , Interlocking Expert Humerus Nail:,[Cannulated] All Sizes Titanium , Interlocking Expert Tibia Nail, All Sizes Titanium , Interlocking Femur Nail,[Cannulated] All Sizes Titanium , Interlocking Femur Nail, All Sizes Titanium , Interlocking Guide Wire, All Sizes Titanium , Interlocking Long Proximal Femur Nail135º[Left]/[Right], All Sizes Titanium , Interlocking Short Proximal Femur Nail (Pfn) 130º/135º, All Sizes Titanium , Interlocking Supra Condylar Nail Angled, All Sizes Titanium , Interlocking Tibial Nail, All Sizes Titanium , Interlocking Trochantric Proximal Femurnail (Tfn)135º, All Sizes Titanium , Italian annual rate contract All Sizes Titanium , K. Nail (Straight)- All Sizes Titanium , K. Nail(Bent)- All Sizes Titanium , K. Wire Double Ended Non Sterile All Sizes Titanium , Lc-Dc Broad Plate: All Sizes Titanium , Lc-Dcp Narrow Plate: All Sizes Titanium , Lc-Dcp Small Plate:3.5Mm:, All Sizes Titanium , Locking 1/3Rd Tubular Plate:3.5Mm:, All Sizes Titanium , Locking Anterolateral Distal Tibial Plate:(L/R):, All Sizes Titanium , Locking Broad Plate: 4.5/5.0Mm:, All Sizes Titanium , Locking Calcaneal Plate: D Type:(L/R):, All Sizes Titanium , Locking Calcaneal Plate: P Type:(L/R):, All Sizes Titanium , Locking Calcaneal Plate:(L/R):, All Sizes Titanium , Locking Cancellous Screw 3.5Mmxf.Th.-, All Sizes Titanium , Locking Cancellous Screw 5.0Mmxf.Th.-, All Sizes Titanium , Locking Clavicle Hook Plate: 3.5Mm:(L/R): All Sizes Titanium , Locking Curved Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Titanium , Locking Curved Reconstruction Plate: 3.5Mm:, All Sizes Titanium , Locking Dhs Barrel Plate All Sizes Titanium , Locking Distal Femu Rplate:(L/R):, All Sizes Titanium , Locking Distal Fibula Plate: 3.5Mm:, All Sizes Titanium , Locking Distal Humerus Plate Dorsolatera With Support: 2.7/3.5Mm:(L/R), All Sizes Titanium , Locking Distal Humerus Plate Dorsolateral:2.7/3.5Mm:(L/R):, All Sizes Titanium , Locking Distal Humerus Plate Medial:2.7/3.5Mm:(L/R):, All Sizes Titanium , Locking Distal Radius (Head4/5Hole)Volarplate:2.7Mm/3.5Mm:(L/R): All Sizes Titanium , Locking Distal Radius Volar Plate:3.5Mm:(L/R):, All Sizes Titanium , Locking Extra-Articular Distal Humerus Plate:3.5Mm:(L/R):, All Sizes Titanium , Locking Lateral Distal Fibula Plate:(L/R):, All Sizes Titanium , Locking Lateral Tibial Plate:(L/R):, All Sizes Titanium , Locking L-Buttress Plate: 4.5/5.0Mm: All Sizes Titanium , Locking Medial Distal Tibial Plate With Tab:(L/R):, All Sizes Titanium , Locking Medial Distal Tibial Plate:(L/R):, All Sizes Titanium , Locking Medial Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Titanium , Locking Medial Proximal Tibial Plate5.0Mm:(L/R): All Sizes Titanium , Locking Narrow Plate: 4.5/5.0Mm:, All Sizes Titanium , Locking Olecranon Plate: 3.5Mm:(L/R): All Sizes Titanium , Locking Pelvic Curved Plate: 3.5Mm: All Sizes Titanium , Locking Pelvic Plate: 3.5Mm: All Sizes Titanium , Locking Philos Plate: 3.5Mm: All Sizes Titanium , Locking Postero Medial Proximal Tibial Plate: All Sizes Titanium , Locking Posterolateral Distal Fibula Plate:(L/R): All Sizes Titanium , Locking Proximal Femur Plate:4.5/5.0Mm:(L/R): All Sizes Titanium , Locking Proximal Humerus Plate:3.5Mm:, All Sizes Titanium , Locking Proximal Tibia Plate 3.5Mm(Ztype):(L/R): All Sizes Titanium , Locking Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Titanium , Locking Proximal Tibia Plate 5.0Mm:(L/R): All Sizes Titanium , Locking S-Clavicle Plate With Lateral Extension: 2.7/3.5Mm:(L/R):, All Sizes Titanium , Locking S-Clavicle Plate: 3.5Mm:(L/R):, All Sizes Titanium , Locking Screw 2.7Mm(S.T.)-, All Sizes Titanium , Locking Screw 3.5Mm(S.T.)-, All Sizes Titanium , Locking Screw 5.0Mm(S.T.)-, All Sizes Titanium , Locking Small Plate: 3.5Mm:, All Sizes Titanium , Locking Small Tplate Obliqueangeled:3.5Mm:(L/R): All Sizes Titanium , Locking Small Tplate Rightangeled:3.5Mm:, All Sizes Titanium , Locking Straight Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Titanium , Locking Straight Reconstruction Plate:3.5Mm:, All Sizes Titanium , Locking T-Buttress Plate: 4.5/5.0Mm: All Sizes Titanium , Locking Tomo Fix Medial High Medial Plate (Osteotomy):3.5Mm:, All Sizes Titanium , Malleolar Screw3.5Mm-, All Sizes Titanium , Malleolar Screw4.5Mm-, All Sizes Titanium , Mechanical Wire Tensioner, All Sizes Titanium , Modular Bipolar Cup [Collar+3,0,-3], [Ball - All Sizes Titanium , Modular Bipolar Stem [Small,Medium,Large], All Sizes Titanium , Multipin Clamp, All Sizes Titanium , Nut, All Sizes Titanium , Nylonnut, All Sizes Titanium , Olive Wire 400Mm, All Sizes Titanium , Open Single Pin Clamp, All Sizes Titanium , Paediatric Dhs Barrel Plate: 3.5Mm:, All Sizes Titanium , Paediatric Dhss Crew With Compression Screw, All Sizes Titanium , Pfn Bolt6.5Mm-, All Sizes Titanium , Pfnbolt8.0Mm-, All Sizes Titanium , Post Male/Female- All Sizes Titanium , Proxima Femur Nail Antirotation (Pfna -Ii):Short:, All Sizes Titanium , Proximal Femur Nail Antirotation (Pfna-Ii):Long:(L/R):, All Sizes Titanium , Rush Nai All Sizes Titanium , S.S. Wire-16,18,20,22,24Gauge, All Sizes Titanium , Scahnz Pin All Sizes Titanium , Schanz Pin Bolt, All Sizes Titanium , Schanz Pin Introducer, All Sizes Titanium , Single Pin Clamp (Deluxe), All Sizes Titanium , Single Pin Clamp (Ordinary), All Sizes Titanium , Sirus Nail Bolt All Sizes Titanium , Small Spanner, All Sizes Titanium , Spacing Washer, All Sizes Titanium , Spiked Ligament Staple [Small&Large], All Sizes Titanium , Spiked Ligament Washer, All Sizes Titanium , Square Nail [Radius/Ulna] All Sizes Titanium , Steinman Pin All Sizes Titanium , Straight Plate All Sizes Titanium , Suture Dis Cwasher, All Sizes Titanium , Suture Discwith -Regular, All Sizes Titanium , Suture Discwith -Conical, All Sizes Titanium , Telescopic Rod All Sizes Titanium , Thompsons Prosthesis Non-Sterile, All Sizes Titanium , Thompsons Prosthesis Sterile, All Sizes Titanium , Threaded Guide Wire- All Sizes Titanium , Threaded K. Wire Double Ended - All Sizes Titanium , Threaded Rod- All Sizes Titanium , Threaded Rod-Slotted- All Sizes Titanium , Threaded Socket- All Sizes Titanium , Tibial Post Fixation Screw All Sizes Titanium , Transverse Clamp, All Sizes Titanium , Triple Trocarset, All Sizes Titanium , Tubeto Tube Clamp, All Sizes Titanium , Tubular Rod(Perinchrate), All Sizes Titanium , Twin Adjustable Clamp-Curved, All Sizes Titanium , Twin Adjustable Clamp-Straight, All Sizes Titanium , Twisted Plate- All Sizes Titanium , Washer (Slotted), All Sizes Titanium , Wire Fixation Bolt-Slotted & Cannulated, All Sizes Titanium , Wrenchoqube All Sizes Titanium , K Wire Sterile Double All Sizes Titanium , 10X14 Medium Tray , Autoclave Drum , Bipolar Cautery , Boiler , Draping Sheet , Duragibre , Ethlon 1-0Rc , Green Draping Sheet , Half Anoscope , Indloop , Isocyanne Acryl Glue , Isoflurane Injection , Laparoscopic Babcock , Laparoscopic Grasper , Laparoscopic Sheath , Lt Clump 300 , Lt Clump 400 , Macroporous Hermial Mush , Monocryl 4-0 Rc , Neostigmine + Glycopyalate (Reversal) Injection , Open Chele Clip Applicator Huom , Ot Gown , Plastic Laparoscopic Port 10 Mm , Plastic Laparoscopic Port 5 Mm , Proctoscope , Prolene 1-0 Rb , Prolene 2-0 Rb , Prolene 3-0 Rb , Pulse Oximeter , Reservoir Bag Below Jar , Skin Marker , Tissue Adhesive Glue , Tracheastong Tray (T.T) , Tridos Vicryl 2-Rb , Vacuronium Injection , 45 Degree Kelmen 0.9Mm Phaco Sleeve (Alcon) , 45 Degree Kelmen 0.9Mm Phaco Tip (Alcon) , Angled Vannas Scissors , Anterior Chamber Iol (Power Range + 1.0 Ds To + 25.0 Ds ) , Artery Forceps (Medium) , B Class Autoclave , Barraquer Needle Holder , Barraquer Wire Speculum , Bimanual I & A Handpiece ( For Phaco 1 Set) , Blades For Eye Surgey Crecent 2.6 , Blades For Eye Surgey Implant 5.2Mm (Keratone) , Blades For Eye Surgey Keratones 2.8Mm Keratone , Blades For Eye Surgey Keratones 3.2Mm Keratone , Bome Plier , Bowmanns Probes , Capsulaorhexis Lit Rate Foeceps With Kirby Round Handle 103Mm Length , Capsulorhexis Forceps 23G With Micro Grasping Tip , Cassette For Laureate Phaco ( Alcon) , Castrovejo Vernier Calliper ( Stainless Steel) , Castroviejo Corneal Scissor , Chalazion Clamp , Chalazion Curette , Conjunctival Scissor , Corneal Universal Curved Scissor , Dastoor Superior Rectus Forceps , Direct Opthalmoscope Bulb With Charger Handle (Heine) , Epilation Forceps , Eye Aspiration Canula 20 No & 22 No. , Eye Bowling , Eye Cannula , Eye Speculum With Adustable Spread (Screw Type) , Eye Vectus , Formalin Chamber , Halogen Bubl 15V.24V (150W) 24V (250W) With Reflection , Hydrophillic Acrylie Foldabale Iols In Preloaded Delivery System Optical Diameter 6Mm , Overall Length 12.5Mm To 13 Mm Optic Design Biconvex 360Degrees Squre Edge And Aspheric Optics Dioptric Range + 1.0 Ds To 30 Ds , Hydroxypropyl Methyleellulose Inj. 2%, 2Ml Pfs (Glass Syring) , Hydroxypropyl Methyleellulose Inj. 2%, 5Ml Pfs (Glass Syring) , Hydrrodissection Cannula , I&A Cannula 18G, 20G, 22G , Instrument Tray , Instrument Tray ( Set Of 15 Instrument) , Iol Dialer , Iris Repositor , Irrigation & Aspiration Cannula 21G (Simco) , Irrigation & Aspiration Cannula 22G (Simco) , Irrigation & Aspiration Cannula 23G (Simco) , Irrigation Wire Vectis 22G , Kidney Tray Large , Kidney Tray Small , Kratz Barraquer Wire Speculum Adult (Size) , Large Bowls , Laureate (Alcon) Phaco Canulla , Laureate (Alcone) Phaco Tips Cleves , Lens Holding Forceps T Type (110Mm) , Lensometer , Lims 1*2 Teeth Extrafine Forceps , Lims Forceps , Mc Pherson Forceps , Mcpherson Angled 12Mm Castroviejo Forceps (109Mm Size) , Medelec Corneal Forceps Staight Micro 1*2 Length , Medium Needle Holder , Mephesson Forceps Angled , Micro Capsulorhexis Forceps , Micro Vanna Scissor , Mosquito Artery , Mosquito Artery Curved , Mosquito Forceps , Mvr Blad 20No. Angled Blade , Needle Holder Barraquer Curved W/O Locl &Lock , Opthalamoscope Bulb , Phaco Chopper , Phaco Spatula Cum Rotator Doublr Ended , Pierse Corneal Forceps (Hoskin) , Pinky Ball (Eye) , Plain Scissor (Small) , Presbiopics Spectacles + 0.50 Ds To + 3.0 Ds , Proparacian Eye Drop , Punctum Dilator , Retinoscope With Charger Handle &Charger , Self Retaining Eye Speculum (Liberman) , Simco Irrigation And Aspiration , Simcoes 18A Cannula 23G,22G , Sinsky Hook , Slik/Nylon 10-0 , Small Bowls , Sponge Holding Forceps , Superior Rectus Forceps 1*2 Teeth , Suture Tying Forceps Curved , Suture Tying Forceps Straight , Tenotomy Scissor , Tonometer , Torch , Trabeudectomy Punch , Travoprost 40 Ug/Ml 2.5Ml Vial Eye Drops 40 Ug/Ml 2.5Ml , Trial Lense Set , Utrata Capsulorhexis Forceps , VannaS Scissor ( Angled) , Vernier Calliper Stainless Steel , Vertical Phaco Chopper , Vicryl Suture 6-0 , Vicryl Suture 8-0 , Vision Box For Eye , Wescott Tenotomy Scissor , Wire Speculum , Wire Vectis (Irrigating) , Wrench For Alcon Phaco Tip (Metal) , Antrum Curette , Antrum Grasping Forceps , Antrum Nasal Scissor Straight , Tonsil Snare , Waugh Dissecting Forceps Plain , Adenoid Curette With Cage Small & Large , Adenoid Curette Without Cage Small & Large , Adson Forceps Plain , Adson Forceps Tooth , All Ent Opd Instrument , Antrume Ball Double Ended , Antrume Punch Backward Cutting Up , Antrume Punch Through Cutting , Antrume Sickle Knife , Antrume Suction Cannula , Ash Septum Forceps , Aur Frichet Nasal Retractor , Backhouse Towel Forceps , Ballenger Swivel Knife , Beals Respatary , Birkett Tonsil Artery Forceps Straight & Curved , Blakeley Nasal Forceps 90 Degree Upward , Blakesley Nasal Forceps 45 Degree Upward , Blakesley Nasal Forceps Straight , Bone Cutting Forceps. , Boyle Davis Mouth Gag Set Of 5 Blades Adult & Child. , Chiset , Circular Knife , Cottle Alar Retractor , Curved Suction 1,2,3,4 1Set , Denis Brown Tonsil Holding Forceps , Draffine Bipod Stand With Plates. , Drill Burr - Cutting- 5,4,3,2 Diamond- 5,4,3,2 , Drill Machionl (Marathan) , Ear Speculum Set Of 4 Black Finish , Endoscope 0 , 45, 70 Degree With Complete Unit. , Ent Examination Unit , Ent Otoscope , Farabeuf Elevator , Freer Elevator Double Ended , Frogior Suction Cannula , Gauge , Hand Piece Nsk Straight , Hartman Aurat Forceps , Hause Diper Nipper , Headlight 10W , Heyman Turbinectomy Scissors , House Curret Double Ended , Iris Scissors 6 , Irrigation And Aspiration Cannula , Joseph Nasal Rasp Fine & Coarse , Joseph Nasal Scissor , Karrisian Punch , Killian Nasal Speculum Small, Medium, Large , Kilner Retractor , Lucs Nasal Forceps Small, Large , Mallet , Massing Elevator Double Ended , Mastoid Retractor 2X2 Pronges , Mastoid Retractor 3X3 Pronges , Mastoid Suction Tube Set Of 4 , Mastoid Suction Tube Set Of 4 , Micro Crocodile Cup Forceps Set , Micro Crocodile Forceps Serrated Set -2 , Micro Ear Suction Tips Set Adapter , Microscopezeiss F Recording , Needle 45 Hook , Needle 90 Hook , Needle Curved , Needle Straight , Negus Pusher Forceps , Negus Tonsil Artery Forceps Long Curved & V- Shaped , Oesteotome , Peritonsillar Sillar Forceps , Plaster Knife , Pta (Pure Tone Audiometers) With Oae , Sickle Knife , Sterilizing Box + Double Silicon Matt , Sterilizing Box With Double Silicon Matt , Suction Elevator With Stillet , Suction Elevator With Stillet. , Suction Machine Portable And For Ot ( 1 Horse Power) , Super Punch Through Letting Up Turned , Superior Punch Through Cutting St. , Thudicum Nasal Speculum Set Of 3 , Tilley Nasal Packing Forcep , Tonsil Dissector , Tonsil Needle Holder , Tonsil Piller Retractor And Dissector , Tonsil Scissor Straight & Curved , Tonsillar Knife , Walsham Septum Forceps , Walter Scissors , Waugh Dissecting Forceps 1X2 Teeth , Yunkour Suction Tube , Black Hit , Candle Round( Big Size) , Detergent Liquid 1 Litre ( (Isi/Iso/Ce Certified)) , Detergent Powder 1Kg ( (Isi/Iso/Ce Certified)) , Disposable Trimmer Plus Skin Prep Razor ( (Isi/Iso/Ce Certified)) , Floor Duster 1X1mt Superior Quality , Hand Duster 22 X 22Cm Superior Quality , Harpic Bathroom Cleaner 500 Ml (Red) ( (Isi/Iso/Ce Certified)) , Harpic Toilet Cleaner 500 Ml (Blue) ( (Isi/Iso/Ce Certified)) , Heat Cure Acrylic Powder (Isi/Iso/Ce Certified) Pink , Hydrogen Peroxide 3%, 100 Ml ( (Isi/Iso/Ce Certified)) , Hydrogen Peroxide Solution 6%, 400 Ml , Lead & Colour Pencil For Tissue Labeling ( (Isi/Iso/Ce Certified)) , Liquid Hand Wash Soap 5 Litre ( (Isi/Iso/Ce Certified)) , Liquid Hand Wash Soap 5 Litre (Safe For Skin)Isi/Iso/Gmp Certified , Loader (Iron Trolley Stainless Steel With Wide& Large Wheels) Weight Bearing Capacity 300 Kg. (For Goods Transporation Inside Hospital) , Mattress Hospital With Rexin Cover 72*36*4 Inch 40 Density 3 Year Warranty ( (Isi/Iso/Ce Certified)) , Micro Crocodile Forcep Curved ( (Isi/Iso/Ce Certified)) , Mopping Trolley With 2 Bucket On Four Wheels ( (Isi/Iso/Ce Certified)) , Mosquito Repellent Liquid Complete Set (Machine With Reffil) Unit Rate ( (Isi/Iso/Ce Certified)) , Mosquito Repellent Liquid ( Reffil Only) Unit Rate , Naphthalene Balls (Repellent Against Insects & Moths) Pack Of 200 Gm. ( (Isi/Iso/Ce Certified)) , Naphthalene Balls (Repellent Against Insects & Moths) Pack Of 200 Gm. ( (Isi/Iso/Ce Certified)) , Needle Destroyer 1.5 Litre Stainless Steel ( (Isi/Iso/Ce Certified)) , Phool Jharu (Baans) Standard Quality Per Kg. , Phool Jharu Standard Quality Per Kg. , Thermocol Box Size 18.5X12.5X13 Cm. , Toilet Cleaner Brush Superior Quality , Tongue Depressor Ss ( (Isi/Iso/Ce Certified)) , Tongue Depressor Ss ,L-Shape ( (Isi/Iso/Ce Certified)) , Wiper For Cleaning Floor(Long Stainless Steel Handle) Good Quality , Wiper For Cleaning Floor(Long Stainless Steel Handle) Good Quality (Scotch Brite) , Squeeze Bottle 100Ml , Falcon Tube 50Ml , Falcon Tube Stand , Ortho-Tolidine Solution/Reagent 500Ml , Ortho-Tolidine Test Kit (5 Ppm Level) , Dengue Elisa Igm Kit , Elisa Reader Paper Roll , Bmw Poly Bags (Red, Black, Yellow, Blue) Per Kag , Bio Waste Dustbin 15-20 Litter
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 12
Haryana View Result →
10.
Educational and Research Institute #11372241 AOC
Performing Power Quality Parameters Test For 4Mw Solar Power Plant At Jntuh, University College Of Engineering, Sulthanpur
Contract Date: Ref. Documents Contract Value : ₹ 3.72 Lakh
Boards / Undertakings / PSU No of Bidders 1
Telangana View Result →
11.
Health and Family Welfare #11359732 AOC
Bids Are invited for Lab Items Micropipette Variable , Esr Tubes , Microscope Glass Slide Plain , Test Tube Glass , Test Tube Glass , Cover Slips , Rubber Toumiquet , Urine And Semen Sterile Container , Field Stain Bottle A And B , Semen Diluting Fluid , Glucose Reagent , Vdrl Kits , Ra Kits , Crp Kits , Aso Kits , Widal Kits , Chikungunya Kits , Malaria Antigen Kits , Urine Pregnancy Kits , Fixative , Yellow Tips , Blue Tips , Bsbp Kit , Calcium Kit Auto Diasys , Citrate Tube Vaccum , Field Stain A , Field Stain B , Bd Flouride Tube Non Vaccum , Glucose Albumin Ag Strips - Glucose Albumin Ag Strips , Glucose Ketone , Haem Test , Hiv Tridot , Bd K3 Edta Tube Vaccum , Plain Non Vaccume Tube , Plain Vaccume Tube , Ck-Mb Liquixx , Phosphorous Liquixx , Lipase Eco-Pack , Amylase Liquixx , Creatinine Liquixx , Calcium Arsenazo Liquixx , S.G.O.T. Liquixx , S.G.P.T. Liquixx , Uric Acid Liquixx , Urea Liquixx , H360 Diluent , H 360 Lyse 500Ml , Elite H Clean , H360 Trilevel Control , Direct Hdl Diasys , Direct Ldl , Liquixx Bilirubin , Erba Wash , Rapid Dengue Igg Or Igm , Dengue Ns1 , Rapid Hiv , Urine Strip 10 Parameter , Pmkit , Dengue Ns 1 Kit Erba , Hiv 1 2 Erba , Hbsag Kits Erba , Anti Hcv Kits , Ldh 21 Ifcc Fs , Gamma Gt , Phosphate Fs Total Quantity : 2495
Contract Date: Ref. Documents Contract Value : ₹ 62.98 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
12.
Public Administrative Department #11334062 Price Bid
Supply Of Laboratory Chemicals, Stains, Reagents, Etc , Acids , Acetic Acid Glacial A.R.Assay 99.9% , Hydrochloric Acid L.R. , Hydrochloric Acid A.R Colorless Assay 35-38% , Nitric Acid A.R. Assay 69-71% , Salicylic Sulphonic Acid A.R. , Sulphuric Acid A.R. Assay 96-98% , Trichloroacetic Acid A.R. Assay >= 99% , Acetone A.R. 99 % Pure , Mac Conkey’S Agar With 0.15%Bile Salt, With Crystal Violet And Nacl. , Nutrient Agar - Bacteriological Grade , Alcohol Methyl A.R. 99%Pure. Acetone Free , Ammonium Sulphate A.R. , Chloroform A.R. , Dextrose ( Anhydrous ) A.R. , Diethyl Ether A.R. 99% Pure , Formaldehyde 40% A. R. , Formaldehyde A.R. 40%. , Isopropyl Alcohol A.R. 99-100% , Potassium Iodide A.R. 99.8% , Paraffin Wax 58-600 C ( M.P. ) , Solution Of Benedict’S Qualitative , Sodium Citrate A.R. , Sodium Hydroxide A. R. Pellets 98 % , Stain Leishman Liquid A.R. , Vial Containing Thromboplastin With Calcium Ions For Prothrombin Time ( Pt ) Liquid Ready To Use Form, Stable Reagent, Is Index <=1.5 , Xylol ( Extra Pure ) A. R. , Anti A ( Monoclonal ) Clear, Sera Titre > 1:256 ( Macroscopically ) Should Be Printed On Vial Label And Product Insert.Avidity <10 Seconds , Anti B ( Monoclonal ) Clear, Sera Titre > 1:256 ( Macroscopically ) Should Be Printed On Vial Label Andproduct Insert. Avidity <10 Seconds , Anti Ab ( Monoclonal ) Clear, Sera Titre > 1:256 ( Macroscopically ) Should Be Printed On Vial Label And Product Insert. Avidity <10 Seconds , Anti D Igm ( Monoclonal ) Clear, Sera Titre > 1:256 ( Macroscopically ) Should Be Printed On Vial Label And Product Insert. Avidity <10 Seconds , Chemical Strips For Detection Of Albumin And Sugar Semi Quantitative Estimation Minimum Detectable Protein 0Mg / 100 Ml. & Sugar 100Mg. / 100 Ml. Colour Developed Should Match The Colour Chart. , Elisa Kits For Hbs Ag. ( 4Th Generation Kits ) - One Step Sandwichelisa Using Monoclonal Antibody & Conjug- Ate Coated Wells. , Iii ( Third ) Generation Anti Hcvigm Elisa Kits Using Microwells Coated With Recombinant Antigens Readable With Automated Elisa Reader , R. A. Antigen ( Containing Latex Reagent With Positive And Negative Control, And Giving Accurate Semiquantative Results. ) , Aso Latex Test , Vdrl Antigen ( Rpr Card Test ) Carbon Particle Based Test With Plastic Boards. Result To Be Read Macroscopically Under A Good Light Source Within 8 Minutes As Black Aggregates Against A White Background Plus Positive And Negative Controls With Stability Of One Year. , Widal Antigen Set. 50 Ml. Each. S.Typhi -H -50 Ml S.Typhi - O-50 Ml S.Paratyphi - Ah - 50 Ml S.Paratyphi - Bh - 50 Ml For Tube Dilution Tests. , Media Mueller Hinton Agar With Ca 25 Mg / Ltr. & Mg 12.5Mg / Ltr. , Tryptone Soya Broth , Immersion Oil For Microscopy With Refractive Index 1.515-1.526 Mfg. E. Merck , Hydrochloric Acid Commercial Grade For Cleaningpurpose. , Vdrl Antigen Kits Containing Stabilised Emulsions Of Cardiolipin Lecithin & Cholesterol Adjusted To Required Sensitivity.The Result Should Be Observable Under Microscope. , Elisakit For Detection Igm Antibody To Pathogenic Leptospirosis Shelf Life To Be One Year Atleast At The Time Of Receipt Of Kit. , Rapid Test For Detecting Igm& Igg Antibodies To All Serotypes Of Dengue Virus Using Recombinant Antigen , Malaria Antigen Detection Test Capable Of Detecting Pan Ldh Using Monoclonal Antibodies & Differentiate Between Pf & Pv , Elisa Kit For Detection Of Ig M Antibody To All Serotypes Of Dengue Virus , Rapid Test For Detecting Of Igm Antibodies To Pathogenic Leptospires. , Ultra Sensitive Hbsag Elisa Screening Test Capable Of Detecting Escape Mutants. , Dengue Ns1 Antigen Elisa Shelf Life To Be 1 Yr At Least At The Time Of Receipt Of Kitwith Controls & Calibrators , Anti Hev Igm Elisa , Anti Hav Igm Elisa , Total Bilirubin Kit Method-Jendrassik & Grofs End- Point Method ( Diazotised Sulphanilic Acid ) Reagent Type-Liquid Stable / Lyophilized Minimum Reconstitution Stability-On Board : 3 Days After Mixing R1 & R2 Linearity -20Mg / Dl ( Ce Mark On Kit ) , Direct Bilirubin Kit Method-Jendrassik & Grofsend- Point Method ( Diazotised Sulphanilic Acid ) Reagent Type-Liquid Stable / Lyophilized Minimum Reconstitution Stability-On Board : 3 Days After Mixing R1 & R2 Linearity -10Mg / Dl ( Ce Mark On Kit ) , Rapid Dengue Ns1 Antigen Detection Test , Blood Urea Nitrogen Method-Initial Rate Uv-Kinetic Method Reagent Type-Liquid Stable / Lyophilized Minimum Reconstitution Stability-45 Days At 2 To 8 Degrees Linearity - 250Mg / Dl ( Ce Mark On Kit ) , Creatinine Method-Initial Rate Alkaline Picratemethod Reagent Type- 2 Reagent Liquid Stable / Lyophilized Minimum Reconstitution Stability- Liquid Stable Reagents Linearity -30Mg / Dl ( Ce Mark On Kit ) , Glucose ( God- Pod ) Method-Enzymatic God-Pod End-Point Method Reagent Type- Lyophilized Enzyme / Liquid Stable Minimum Reconstitution Stability -30 Days At 2 To 8 Degrees Linearity - 600Mg / Dl ( Ce Mark On Kit ) , Sgot / Aspartate Transaminase Method-Ifcc Uv Kinetic Method Reagent Type-Liquid Stable / Lyophilized Minimum Reconstitution Stability- 30 Days At 2 To 8 Degrees Linearity-350 Iu / L ( Ce Mark On Kit ) , Sgpt / Alanine Transaminase Method-Ifcc Uv Kinetic Method Reagent Type-Liquid Stable / Lyophilized Minimum Reconstitution Stability-30 Days At 2 To 8 Degrees Linearity -350 Iu / L ( Ce Mark On Kit ) , Amylase Kit Method-Kinetic Method Using Gal G2 F ( Alpha ) Cnp Reagent Type-Liquid Stable / Lyophilizedreagents Minimum Reconstitution Stability- Liquid Stable Reagents Linearity-2000 U / L ( Ce Mark On Kit ) , Vibrio Cholerase Polyvalent 01 Antisera , Vibro Cholerae Ogawa Antisera , Vibro Cholerae Inaba Antisera , Salmonella Polyvalent Antisera ( A-G ) , Salmonella Group 02 Antisera , Salmonella Group 04 Antisera , Salmonella Group 09 Antisera , Thiosuplphate Citrate Bile Salt Sucrose ( Tcbs ) Agar-Dehyratedready To Make Culturemedia , Xylose Lysine Deoxycholate Agar ( Xld Agar ) , Amikacin ( 30 Mcg ) , Amoxycillin +Clavulanic Acid ( 20 Mcg / 10Mcg ) , Ampicillin ( 10 Mcg ) , Ampicillin + Sulbactam ( 10 Mcg / 10 Mcg ) , Azithomycin ( 15 Mcg ) , Aztreonam , Bacitracin ( 0.04U ) , Cefaperazone +Sulbactam ( 75 Mcg / 10 Mcg ) , Cefepime ( 30Mcg ) , Cefoxitin ( 30Mcg ) , Ceftazidime ( 30 Mcg ) , Ceftazidime + Clavulanic Acid ( 30 Mcg / 10 Mcg ) , Ceftriaxone ( 30 Mcg ) , Chlorampenicol ( 30 Mcg ) , Ciprofloxacin ( 5 Mcg ) , Clindamycin ( 2Mcg ) , Colistin ( 10 Mg ) , Colistin Mic ( E-Test ) Strips , Erythromycin ( 15 Mcg ) , Furazolidone ( 100 Mcg ) , Gentamicin ( 10 Mcg ) , Gentamycin ( 120 Mcg ) , Imipenem ( 10Mcg ) , Levofloxacin ( 5 Mcg ) , Linezolid ( 30Mcg ) , Meropenem ( 10Mcg ) , Metronidazole ( 5 Mcg ) , Mupirocin ( 200Mcg ) , Nalidixic Acid ( 30 Mcg ) , Nitrofurantoin ( 300 Mcg ) , Nitrofurantoin ( 300 Mcg ) , Norfloxacin ( 10 Mcg ) , Novobiocin ( 5 Mcg ) , Ofloxacin ( 5 Mcg ) , Optochin ( 5Mcg ) , Oxacillin ( 1Mcg ) , Penicillin G 10U , Piperacillin ( 100 Mcg ) , Piperacillin + Tazobactam ( 100Mcg / 10Mcg ) , Polymyxin B 300 U , Polymyxin B 50 U , Teicoplanin ( 30 Mcg ) , Tetracycline ( 30 Mcg ) , Tigecycline ( 15 Mcg ) , Trimethoprim / Sulphamethoxazole ( 1.25 Mcg / 23.75 Mcg ) , Vancomycin ( 30 Mcg ) , Vancomycin Mic ( E-Test ) Strips , Antisera Clostridium Species , Antisera E. Coli O157 , Anaerobic Gaspack Sachet For 1.5L Jar , Spore Strips ( Bacillus Steothermophilus Spores For Steam Sterilization-10 Spores ) , Description : Blood Glucose Test Strip Used With Glucometer For Blood Sugar Estimation. Being A Closed System, The Strips Have To Be Of Same Company As Glucometers. Equivalent Numbers Of Sterile, Disposable, Auto Disabled Finger Pricking Lancets Are Needed For Blood Collection By Finger Prick Method. Price To Be Quoted For Supply Of Blood Glucose Test Strip & Lancet Together. ( Tenderer Has To Give Initially 200 Glucometers Free Of Cost For Utilisation Of Glucose Strips For Eho Dept. ) 1 Free Glucometer Should Be Provided By The Company For Every 2500 Glucostrips After Issue Of P.O. , Rapid Immunochromatography Test Kit For Detection Of Hbsag Upto 0.1Iu / Ml Detection Limit. , Kovacs Reagent , Oxidase Reagent ( N, N, N, , N, - Tetramethyl-P-Phenylene Diamine Dihydrochloride ) , Sodium Polyanethanol Sulphonate ( Sps ) , Ar , Triple Sugar Iron Agar , Mueller Hinton Broth , Robertson Cooked Meat Medium , Mannitol Salt Agar , Brain Heart Infusion Broth , Nylon Flocked Swab With Medium For Viral Transport And Culture For H1n1 Influenza Virus Isolation , 5% Sheep Blood Agar ( Readymade Plates ) , Chocolate Agar Containing 5% Sheep Blood ( Readymade Plates ) , Sheep Blood , Crystal Violet Powder ( Practical Grade ) , Safranine Powder ( Practical Grade ) , Iodine Crystals , Argininedihydrolase Broth , Ornithine Decarboxylase Broth , Lysine Decarboxylase Broth , Decarboxylase Broth Base, Moeller , Urea Agar Base ( Christensens ) , Phenylalanine Agar , Simmons Citrate Agar , Fluid Thioglycollate Medium , Rapid Test For Detection Of Igm Antibodies To Hcv Virus Based On The Principle Of Immunochromatography , Rapid Test For Detection Of Hiv-1 & Hiv-2 Ab’Sfrom Serum , Plasma And Whole Blood. Specificity And Sensitivity Of The Test Should Be 100% For All Sample Types Sample Volume Should Be Less Than 50Ul If Buffer Is Required, It Should Be In Adequate Quantity For Testing Of Samples Test Should Be Ivd Marked. & Manufacturer Should Be Iso Compliant , Ready To Use Lj Slants , Lj With Isoniazid , Lj With Rifampicin , Lj With Ethambutol , Lj With Streptomycin , Lj With Pnb 500?M / Ml , Nitrate Reduction Kit , Dubos Broth ( Tween 80 ) , Phenopthalein Disulphate Tripotassium , Peptone Water , Sabouraud Dextrose Agar , Sabouraud Cycloheximide Chloramphenicol Agar , Yeast Nitrogen Base Agar ( Twin Pack ) , Candida Chromogenic Differential Agar Base , Rapid Detection Of Salmonella Typhiigg / Igm Antibody Test , Rapid Detection Of Dengue Ns1 Antigen & Igg / Igm Antibody Test In Same Card ( Rapid Dengue Duo Test ) , Cornmeal Agar , Potato Dextrose Agar , Lactophenol Cotton Blue Solution , Rapid Test To Detect Mpt 64 Antigen Of Mycobacterium Tuberculosis Complex, The Test Principle Could Be Immunochromatography Or Agglutination , Reagent Strips Urinanalysis 10 Parameters They Should Be Able To Detect And Help In Semi-Quantification By Visual Method Of Various Parameters Analysed By Developing Different Colors For Different Concentrations / Quantity Of The Substrate Analysed. The Color Provided. 1. Ph- Measure Urine Ph Values In Range Of 5 To 9. There Should Be Different Color Developed On Reagent Strip For Every 0.5 Change In Ph. 2. Specific Gravity- Measure Specific Gravity Of Urine Samples In Range Of 1.000 To 1.030. There Should Be Change In Ph. 2. Specific Gravity- Measure Specific Gravity Of Urine Samples In Range Of 1.000 To 1.030. There Should Be Different Color Developed On Reagent Strip For Every 0.5 Change In Specific Gravity. 3. Urobilinogen= Measure Urobilinogen Levels As Low As 0.4 Mg / Dl Or 7 Mol / L. Semi-Quantify It As Trace, Small, Moderate, Large Increase With Levels Beyond Detectable Range. 4. Glucose- Detect Urine Glucose Concentration Of / Near 40 Mg / Dl ( 2.2 Mmol / L ) And Above. Semi-Quantificatio Of Urine Glucose By Visual Method Should Be Possible As: Trace ( 5 Mmol / L Or 100 Mg / Dl ) , + ( 15Mmol / L Or 250 Mg / Dl ) , ++ ( 30 Mmol / L Or 500 Mg / Dl, +++ ( 60 Mmol / L Or 1000 Mg / Dl ) , ++++ ( 110 Mmol / L Or 2000 Mg / Dl ) , 5. Bilirubin- Direct Urine Bilirubin Levels Of / Near 0.5 Mg / Dl Or 9 Mol / L And Above, Semi Quantify It As Small, Moderate And Large Increase With Level Beyond Detectable Range. 6. Ketones-Detect Urine Ketones ( Acetoacetic Acid ) Levels Of / Near 5 Mg / Dl Or 0.5 Mmol / L And Above. Semi Quantify It As Trace, Small, Moderate, Large Increase With Level Beyond Detectable Range. 7. Blood- Detect 5 To 10 Rbcs / I And Above In Urine Sample. Semi Quantity It As Trace, Small Moderate And Large Hemoglobinuria / Hematuria With Increase Beyond Detectable Range. 8. Proteins- Detect Urine Albumin Levels Of / Near 6 Mg / Dl And Above. Semi Quantify It As Trace ( <30 Mg / Dl ) , + ( 30 Mg / Dl ) , ++ ( 100 Mg / Dl ) , +++ ( 300 Mg / Dl ) , And ++++ ( > / =2000 Mg / Dl ) , 9. Nitrite- Detect Urine Nitrite Levels Of / Near 0.05 Mg / Dl Or 11 Mol / L And Above. Semi Quantify It As Trace, Small, Moderate, Large Increase With Levels Beyond Detectable Range. 10. Leucocytes- Detect Near 10 To 20 Wbc / L And Above In Urine Sample. Semi- Quantify It As Trace, Small, Moderate Large Increase With Levels Beyond Detectable Range. , Ahgs Gel ( Coombs ) Test Card For Direct Coombs Test, Indirect Coombs Test, Indirect Antibody Test, Antibody Screening And Identification Ahgs Gel Card Should Contain Six Microtubes Prefilled With Gel In Suitable Buffer Containing Polyspecific Coombs Reagent ( Anti Lgg+Monoclonal Anti C3d. With Sheif Life Of 12 Months And Storage Temp 4-25 Degree C. , Diluent – 2 ( Liss ) Modified Low Ionic Strength Saline Solution For Preparation Of Red Cell Suspension , Dengue-Chikungunya Rtpcr Kit ( 1X96 Test ) , Potassium Tellurite Blood Agar , Rtpcr Kit For Detecting Covid-19 Virus , Rtpcr Kit For Detecting Dengue Virus , Rtpcr Kit For Detecting Influenza A, H1n1, H3n2 & Influenza B Virus , Viral Rna Extraction Kit - Manual, Spin Column Based , Viral Rna Extraction Kit- Automated, Magnetic, Bead Based Compatible With Kingfisher Flex And Hi Media , Rapid Test For Crypto+Giardia+Entamoeba , Tinsdale Agar , Albumin Bovine Serum , Alkaline Phosphatase Liquid Stable Dea- Pnpp Kinetic Method Reconstitution Stability ( If Applicable ) : 10 Days Limit Of Quantification: = 3 Iu / L Precision: = 5% Linearity Upto 2000U / L , Serum Albumin Method: Modified Bcg Method Reconstitution Stability: 21 Days Or More Linearity: 9 Gm / Dl Or More Precision: = 5% , Serum Ldl-Cholesterol : Method: Enzymatic Clearance Assay For The In Vitro Quantitative Determination Reconstitution Stability: 21 Days Or More Linearity: 800 Mg / Dl Or More Precision: = 5% , Cholesterol ( 100Ml ) , Crp Reagentmethod -Immuniturbidimetric Resconstitution Stability 10 Days Limit Of Quantification <7Mg / L Lineraity >200Mg / L Precision <5% , Hdl- Cholesterol , Ldl- Cholesterol , Sterile Microtitre Assay Plate 96 Well With Lid Clear Round Bottom Non Treated Polypropylene , Total Cholesterol , F-18 Fdg ( To Be Delivered To Nuclear Medicine Department Due To Short Half Life When Ordered ) , Bovine Albumin 22% Bovine Serum Albumin For Serological Application Total Protein 22% ( G / Dl ) Conductivity 6-8 10-4 Omms / Cm At 25+ / - 1Oc Storege 2 -8 C / Stability 36 Months , Colistin Microbroth Dilution Test ( Ready To Use Predrug-Coated Plates ) , Hepatitis B Virus E Antigen Elisa ( Hbeag ) , Cefotaxime E Strip ( 0.016- 256 Mcg / Ml ) , Ceftazidime Avibactum E Strip ( 0.016- 256 Mcg / Ml ) , Chloramphenicol E Strip ( 0.016- 256 Mcg / Ml ) , Ciprofloxacin E Strip ( 0.016- 256 Mcg / Ml ) , Class V Chemical Indicators Strips , Distilled Water , Fosfomycin ( 200 Mcg ) Antibiotic Discs , Gram Stain Set Of 4 Bottles Ready To Use Kit , Hepatitis B Core Igm Elisa , Inulin A.R , Levofloxacin E Strip ( 0.016- 256 Mcg / Ml ) , Manual Nucleic Acid Extraction Kit ( Silica Column Based ) , Meropenem E Strip ( 0.016- 256 Mcg / Ml ) , Multiplex Pcr For Fever Panel ( Typhoid, Scrub Typhus, Malaria, Chikungunya ) , N-Acetyl L-Cysteine , Neurovirus Pathogen Detection Kit By Pcr ( Real Time ) , Penicillin E Strip ( 0.016- 256 Mcg / Ml ) , Poly L Lysine Solu Tion 100Ml Bottle 0.1% ( W / V ) In H2o , Rapid Test Kits For Occult Blood Testing , Rnase Away ( 500Ml Bottle ) , Rubella Elisa Kit Igm , Rubella Rtpcr Kit , Tigecycline E Strip ( 0.016- 256 Mcg / Ml ) , Total Nucleic Acid Automated Extraction Kit ( 1X96 Test ) , Total Nucleic Acid Manual Extraction Kit ( 1X96 Test ) , Tpha -Treponema Pallidum Haemagglutination Assay Kit , Viral Dna Extraction Kit- Automated, Magnetic, Bead Based Compatible With Kingfisher Flex And Hi Media , Zika Virus Rtpcr Kit , Antibody To Hbsag Elisa Kit ( Quantitative ) , Chikungunya Igm Antibody Elisa , Chlamydia Antigen Elisa , Absolute Alcohol , Charcoal Agar Plates , Told Hewitt Broth , Absolute Alcohol , Alcian Blue , Dpx Mountant ( Sd Fine ) , Hematoxylin Powder , Her 2 - Breast Markers For Immuno His , Horse Radish Peroxidase Ihc Detection ( Hrp-Dab ) Kit / Dab- 1 Step / 2 Step , Plastic Casettes For Tissue Embedding , Estrogen Recepter For Immuno Histochemistry , Ki 67 / Mib-1 , Paraffin Granules , Pr ( Progestron Recpter For Immuno Histochem ) , D-Dimer Buffer , Serum Calcium O-Cresolphthalein Complexone End Point Method Single Reagent System Reconstitution Stability -07 Days Or More Linearity Up To 15Mg% Interference Of Mg And Fe Should Be Negligible No Special Treatment Should Be Required For Lipemic Samples. , Serum Total Cholesterol, Enzymatic End Point Method ( Chod-Pod ) Or Smiliar Method, Reconstitution Stability 21 Days Or More, Linearity 500 Mg / Dl Or More, Precision <= 5% , Serum Hdl Cholesterol, Enzymatic Clearance Assay For The In Vitro Quantitative Determination, Reconstitutional Stability 21 Days More, Linearity 150 Mg / Dl Or More, Precision <=5% , Serum Lactate Method: Lactate Oxidase Reconstitution Stability ( If Applicable ) : 10 Days Limit Of Quantification: = 4.5 Mg / Dl Linearity: = 135 Mg / Dl Precision: = 5% , Serum Lipase Method: Uv Kinetic Method Reconstitution Stability ( If Applicable ) : 10 Days Limit Of Quantification: = 3 Iu / L Linearity: = 250 Iu / L Precision: = 5% , Serum Phosphorus U.V. End Point Method Single Reagent, Ready To Use Linearity Up To 20 Mg% Or More Long Shelf Life Pack Size Should Be 30 – 50 Ml , Serum Triglyceride Method: Gpo-Pap Method Reconstitution Stability: 21 Days Or More Linearity: 1000 Mg / Dl Or More Precision: = 5% , Sr Magnesium Method: Xylidine Blue Reconstitution Stability ( If Applicable ) : 10 Days Limit Of Quantification: = 0.2 Mg / Dl Linearity: = 5.5 Mg / Dl Precision: = 5% , Serum Uric Acid Kit Uricase Pap Method Reconstitution Stability ( If Applicable ) : 10 Days Limit Of Quantification: = 3 Iu / L Precision: = 5% Linearity Up To 20Mg / Dl , Amylase Xl ( 25Ml ) , Bicarbonate Formalin Semen Diluting Solution , Clinical Control / Normal Control , Clinical Control / Path Control , C Reactive Protein Kit , Distilled Water ( 5Ltr ) , Field Stain A , Field Stain B , G6pd Kit , Ketone & Glucose Strips , Solution Pack For Electrolytes ( Na / K / Li ) , Whatman Filter Paper , Genomic Dna Extraction Kit , Wash Solution For Au480 Autoanalyser , Homocysteine With Calibrator And Control , Sb C18 Hplc Column 250X4.6Mm, 5Micron , Hiv Elisa Generation 4Th Kit For Hiv Ag& Ab 1& 2 Viruses For Detection Of Hiv-1 P24 Antigen & Antibodies To Hiv-1 And Hiv -2 In Human Serum / Plasma
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 36
Maharashtra View Result →
13.
Defence #11327795 AOC
Bids Are invited for Combat Readiness Test Parameters Information Board Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 7,200
Statutory Bodies & Commissions/Committees No of Bidders 3
Punjab View Result →
14.
Youth Affairs and Sports and Culture #11323145 Technical Bid
Tender For Purchase Of Biomechanical Equipments , Nord Board , It Should Be Portable And Should Have 2 Load Cell Sensors Per Unit With Easy To Attach Hooks Pivoting 360 Degrees Joint Improving Sensor Accuracy It Should Have Knee Position Indicator For Replication Of Test Position In Each Time. Should Have Sample Rate Per Sensor: Upto 400Hz, Capacity Per Sensor: 100 Kg/980-1000N Safe Over Load Per Sensor: 150Kg/1500N, Max Over Load Per Sensor: 200Kg/ 2000N, Resolution: 1N And Sensitivity: 22.0+/-Mv/V. Should Have Rechargeable Battery & Battery Life Should Be100 Active Hours Approx. Should Have Working Temperature Range 5-40®C. (All Weather Proof) Latest Upgradable Software Should Have Both Wired & Wireless Connectivity Connectivity Through Usb (Wired) Bluetooth Low Energy (Ble) For Ipad & Iphone I.E. (Wireless Connectivity) Should Provide 4 Years Warranty On Hardware, Should Be Provided With Latest Upgradable Software And Free Software Updates. Should Have Software Available In Mobile & Laptop (Desktop) Application With Cloud Analytics Platform Applications. Should Have Ability To Collect Data Both Local I.E. Laptop And On Ios Devices. Local Software:- For Data Collection & Data Analysis Locally. Cloud Software:- For Athlete Data Management And Analysis. Local (Desktop /Laptop) Software Should Be Compatible With Windows 10 Desktop Application Ios 13 Or Later Application (Ipad & Iphone). Should Have Ability To Collect Data Of Over 10000 Athletes Or More To Choose With Simple Name Search / Grouping Them. Cloud Analytics Platform For Analysis. Software (Application) Must Give Real Time Feedback Of Testing. License Must Be Valid For 4Years. Cloud Software: - Should Automatically Sync All Data Collected On Local Mobile And Laptop Application When Connected To Internet. O Should Have A Dashboard To See Overview Of Organizations Athletes Data And Different Tiles (Data Indicators) To See Athletes Within And Outside Threshold Zones. Report Section:- Should Have Port Section To Able To Compare Different Groups/Athletes On Longitudinal Data. Should Have Ability To Compare Same Athletes Data Over The Period. Athletes Profile:- Should Have Functionality To Enter Anthropometry (I.E. Upper Body & Lower Body Measurement). Athletes Profile Should Be Auto Sync To Local Application And Flexibility To Move Across Different Groups Or Teams With In Organization And Functionality To Pick Any Athlete From Large Pool (1000 Or More Athlete). • Should Be Able To Setup Different Access To Different People I.E. To Physiotherapist, Sports Scientist And S&C Trainer Within The Organization To Secure Data Access. Api Integration:- Should Have Open-Source Api Code For Integration Into Athlete Management System To Integrate In Ams System. Should Have Software License Valid For 4Years. Wi-Fi Tablet 64Gb, Space Grey-1Year Warranty (As Provided By Oem) - Service By Customer Service Of Oem Only.Hsn:8471. Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. , Electromyography (Open) , The System Should Be Supplied With Minimum 16 High Speed Wireless Emg Channel With Built In Imu Sensor. Should Have Analog+ Digital Base Station • Should Have Analogy Output Option To Facilitate Integration With Third Party Hardware And Software Sensor Should Have Fixed Inter Sensor Delay Of 0.5 Milliseconds Or Less Sensors Should Have Fixed Spacing Between Electrodes Preferably Less Than 15 Mm To Avoid Motion Artifacts And Cross-Talk Sensor Contacts Should Be Made Up Of A Metal For Better Contact And Better-Quality Signal Should Be Supplied With A Charging/Transmitting Station That Communicates With Sensors To Get Information On Their Charging, Recording And Signal Strength Sensors, Sensor Skin Interface, Cable, Power Adapter And Accessories Sensors Facilitate Emg And Imu Measurements Emg Data Analysis Software For Stand-Alone Usage With Live Recording Of At Least 32 Channels And Analysis For Both Online And Offline Modes. Trigger Module Package Analog Adapter With Cable For Dynamometer Integration. • Should Have Option For Real Time Data Streaming To Computational Softwares Such As Mat Lab. Mobile Emg Suite For Outdoor Applications Technical Support For The Lifetime Or At Least For A Period Of 05 Years. The System Should Be Supplied With Sensor Docking Unit And Charging System The System Should Be Supplied With Double Sided Adhesive Stickers (At Least 5000) And Double-Sided Adhesive Tape Rolls (At Least 20). The System Should Be Supplied With At Least 2000 Hz Of Sampling Rate Or More Per Sensor. The System Should Have A Baseline Noise < 1 ?V Or Better. The Emg System Should Have +20,000 ? Vemg Input Range Or Better. The System Should Have Software Controlled Digital Filtering, The System Should Have Shielded Cables For Minimal Artifact. The Software Should Allow Video Recording During Emg Data Recording Should Have At Least 8 Hours Of Battery Backup • Should Have Wireless Working Range Of At Least 40M Or More To Capture Data During Various Sport Specific Movements, Should Be Configurable To 32 Channels In Future. The Emg System Should Be Integrated With 3D Motion Analysis, Force Plate, Isokinetic Dynamometer, Instrumented Treadmill, Imu, Eye Tracking, Video Analysis Etc. The Necessary Third-Party Hardware/ Software Should Be Supplied By The Seller For Integration Of Emg With Other Systems. Laptop I7 (Latest Generation) With 32Gb Ram Or More, 2Tb Ssd, At Least 15.6-Inch Screen And Laser Printer With Copy/Scan/Print To Generate And View Report And Additionally A 32-Inch Monitor For Dual Display. Usfda, Iso & Euiec Certificates Or Equivalent. Installation At The Institute And Training To The Users By Experts Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. , Timing Gates (Open) , It Should Be A Wireless Speed Gate With 12 Gates And Provision For Increasing Gates Up To 15 Gates/Splits Or More With Split Distance Fully Customizable To Perform Variety Of Testing (Can Have Splits At 1 Meter Or 10 Meters Or Customized Distance). It Should Be Photocell & Reflector System Only (Light Or Laser Based) Considering Flexibility It Offers To Use Variety Of Testing Protocols With Visual Cue (Light System Provide A Cue To The Athlete To Change Direction) I.E. Single Or Dual Feedback Functions For Athletes. It Should Have An Accuracy Of Minimum 1 Hundredth Of A Second (1/1000Th Of A Second) Or Beyond, With A System To Eliminate Errors Caused By Hands, Feet And Other Body Parts, Equipment (To Provide Most Accurate Data) Must Have Error Correction Processing (Ecp) Inside The Timing Unit. Wireless Range: - Should Be Able To Control Gates Wirelessly With A Range Up To 180-200 Meters. It Should Have Functionalities To Provide 6 Options When Using Different Accessories A. Auto Beam Break B. In-Beam C. Reactive D. Start Pad E. Vibration (Reaction Time Measures) F. Rfid Various Accessories Should Be Integrated With Timing Gates Thus Providing Various Testing Possibilities Of Athletes. It Should Integrate With A Jump Mat (Accessories) For Plyometric Training And Explosive Power Measurement With Multiple Jump Testing Option On Jump Mats. Tests & Drills To Be Measured System Must Be Able To Measure- I. Linear (Straight Line Sprints), Shuttles With Customized Split Distance. Ii. Yoyo, Beep Tests (With Custom Customized Time Interval For Endurance Testing) Iii. Planned, Unplanned Change Of Direction For Agility Testing. Iv. Multiple Reactive Movements. V. Reaction Time Measure For Starting Blocks Any Customized Tests/ Drill With All 6 Or More Gates And No Restrictions On Number Of Customized Drills To Provide More Flexibility In Testing. • Mobile/Tablet Applications & Web Application: I. System Should Be Controlled By And Operated By Tablet/Laptop/Smartphone (Mobile Applications: -Should Have Both Ios & Android Mandatory Considering Large Android Phone User Base In India Along With Ios Application) And Ii. Must Have A Cloud Web Application Platform For Tracking Performance Variables Of 1000 Or More Athletes At One Go For Various Testing. Utility Of Mobile Applications: - I. Flexibility To Perform Test: -Mobile/Tablet Applications Should Have Functionality To - A. Pick Any Athlete From Large Pool (1000 Or More Athlete) B. Pick Any Drill Or Test To Be Conducted And Ability To Customize A Test With All 4 Or More Gates. C. To Visually Display Gates On Mobile Screen To Understand How To Perform A Test/Drill. Application To Automatically Detect Setup Of Gates. Ii. It Should Provide Real Time Data Of Performance, Reaction Time, Speed, And Agility. Iii.Single Or Multiple User With Authorized Access Control- Only Authorized Single Or Multiple Users Admins Should Have Access To Operate Application For Data Security And Data Access. Should Automatically Send Data To The Cloud Application Once Connected To Internet. Software License To Be Valid For 3 Years. Utility Of Web Application: - Functionality Of Web Application: - I. Automatically Populate Data Collected By Mobile Applications. Ii. Should Be Able To Compare Single Athlete Data Historically From Different Trials Or Compare Various Athletes For A Test Or A Drill Over Any Time Period. Iii. Should Be Able To Manage Athletes (By Creating Sports Specific Teams) Iv. Should Be Able To Download Data In Pdf, Excel And Ability To Customize These Reports V. Software License To Be Valid For 3 Years. Integration With 3Rd Party Ams System: -Software Should Have Functionality To Integrate Ams In Near Future Automatically, A Software Must Have Api Available For Seam Less Integration Of All/ Selected Data Of Speed Gates Automatically With Number Of World Leading Ams Systems And This Must Be Automated With Few Clicks Only. Rechargeable Battery Based Systems Should Have At Least 8 Hours Backup Or More. The System Should Be Robust Enough To Be Used In Various Weather Conditions. Should Have Height Adjustable Tripod Stands To Accommodate Various Sports Activities And Test Protocols. Should Provide One (1) Ipad Of Desired Specification To Run The Application (With Minimum 1 Year Warranty) Warranty For 2 Years. Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. , Kinematic Analysis System (Open) , . Marker-Based And Markerless (Ai Based) Biomechanical System For Two-Dimensional (2D) Analysis Of Gait Analysis Including Walking And Running Activities, Posture And Other Sports Activities. 2. Biomechanical Motion Analysis Software (Pre-Installed In Computer) Within Built Modules For Standing & Sitting Posture Analysis, Walking Gait Analysis & Running Gait Analysis, Compatible With A Suitable Operating System. 3. It Should Allow Measurement Of Joint Angles & Other Data From Sports Specific Activities Like Jump, Squat, Golf, Tennis Etc. 4. It Should Also Have Features For Marker-Less Assessment Of Functional Activities Like Squats And Other Range Of Motions Of The Body During Various Activities. 5. It Should Be Able To Analyze The Anterior, Posterior, Left & Right Lateral Views Of The Subject And Provide The Following Parameters: (A) Walking Gait Analysis: Rear Foot Eversion/Inversion, Lateral Pelvic Drop, Knee Flexion/Extension, Hip Flexion / Extension, Ankle Plantar /Dorsiflexion, Knee Ab /Adduction, Stance Phase % - Swing Phase %, Step Length, Stride Length, Gait Velocity Etc. Data To Be Measured For Both Left And Right Extremities (B) Running Gait Analysis: Rear-Foot Eversion/Inversion, Lateral Pelvic Drop, Trunk Side Bending, Crossover Gait, Knee Flexion, Leg Inclination Angle, Knee Toe-Alignment, Hip Extension, Ankle Plantar Flexion, Net Vertical Oscillation Of Center Of Mass, Knee Ab /Adduction, Ground Contact Time Etc.. Data To Be Measured For Both Left And Right Extremities. (C) Posture Analysis: Major Postural Deviations Like Rear-Foot Eversion /Inversion, Forward Head Posture, Shoulder Protraction, Genu Recurvate, Lateral Head Tilt, Shoulder Level, Lateral Pelvic Drop, Lateral Trunk Sway, Q Angle (D) Sitting Posture Angle: Viewing Angle, Viewing Distance, Forward Head Angle, Elbow Flexion/Extension, Trunk Flexion/Extension, Knee Flexion/Extension, Hip Knee Alignment (E) Bike Fitting: Major Parameters Like Ankle Plantar Flexion /Dorsiflexion, Knee Flexion/ Extension, Hip Flexion, Hip Vertical Travel, Back Angle, Elbow Angle, Armpit Angle, Kops, Knee Tracking. (F) Squat Analysis: Major Parameters Like Descent: Ascent Ratio, Squat Stance Width, Heel Rise Detection, Head Tilt, Shoulder Tilt, Lateral Trunk Tilt, Pelvic Tilt, Frontal Knee Alignment, Knee-Toe Alignment, Trunk Inclination (Sagittal Plane), Tibia Inclination (Sagittal Plane), Knee Flexion (Depth Of Squat). 6. It Should Be Able To Generate Organized Reports With Following Features: (A) Data Represented In Tabular & Photographic Form (B) In Built Reference Ranges For Every Parameter Measured. (C) All Data Lying Outside Reference Ranges To Be Highlighted In Bold (D) Automatic Documentation Of All Observations And Abnormal Biomechanics In Form Of Notes (With Choice Of Hindi Or English Language If Needed). (E) Automatic Summary Of All Reports Should Be Generated. 7. It Should Have An Option To Export All Data To Excel Sheets 8. It Should Have An Inbuilt Comparison Feature That Generates Post Comparison Reports To Monitor Changes In Patients Posture And Gait. 9. It Should Have An In-Built Data Base Feature For Storing Analysis Data. 10. Software Should Use Ai (Artificial Intelligence) Models To Provide Markerless Analysis. 11. Software Should Also Use Ai (Artificial Intelligence) Models To Aid In Marker Digitization In Case Of Marker Based Analysis. 12. Motion Capture Cameras Supporting Video Capture In Outdoor Conditions (Running Track) As Well As Indoor Conditions (Floor, Walkway & Treadmill). Camera Specifications: (A) Wired Cameras-04 In Numbers With Capture Rate Up To 60 Fps. (B) Wirelesscameras-02 In Numbers With Capture Rate Up To 240 Fps. 12. The System Should Have Data Transfer Cables And Connector Cables For Camera Along With Tripods For Mounting Of Cameras. 13. Marker Set (With Marker Placement Guide) For Standing Posture, Walking Gait Analysis, Running Gait Analysis And Bike Fitting With Reusable Markers Or Disposable Markers (Adequate In Number For Conducting At Least 100 Tests Each) 14. Compression Clothing For Lower Body & Upper Body Should Be Provided. 15. Quality Clearance For Cameras: Usfcc/ Euce/ Isobis (Either Of The Certifications). 16. Should Be Safe And Non-Invasive, Easy To Use. 17. Carry Case/Bag For Storing And Carrying All Hardware Equipment To Be Provided. 18. In Person Training, Virtual Assistance & Technical Support For System Operation. 19. The Biomechanical Analysis Software Should Have License Validity Along With All Updates And Bug Fixes For A Minimum Period Of 10 Years. 20. The System Should Come With A Hardware Warranty Of 3 Years. 21. Computer Specifications: Intel 5Th Generation Processor Or Better, 8 Gb Ram, Windows 10/11, At Least 2 Usb Ports. , Foot Pressure Analysis System (Open) , 1. The Number Of Sensors Should Be Between 2900 To 4000. 2. The Active Sensor Area Should Be At Least 375 X 375 Mm. 3. The System Should Be Able To Perform Static (Standing) & Dynamic (Walking) Assessment And Provide Data Of Foot Pressure Distribution During These Activities. 4. It Should Also Have Capability To Perform Sway (Balance) Assessments During Eyes Open And Closed Conditions. 5. System Should Be Able To Generate Automated Remarks For Symmetries Of Pressure Distribution. 6. System Should Be Able To Identify Change In Pressures With & Without Footwear /In Soles. 7. Option Of Comparing Patients Data Over Time Should Be Provided. 8. Option Of Exporting Report Data In Excel Format Should Be Available. 9. Facility To Email Report With Patient Information Should Be Provided. 10. System Should Have Wired Operation. 11. System Should Work Without The Internet. 12. Should Have Operating Temperature Range Between 5° C To 50°C 13. Frequency Range Should Be At Least 100 Hz 14. Pressure Range Should Be Between 1 To 150 Psi 15. Sensor Resolution Should Be Equal To Or More Than 2 Per Cm^2 16. Sensor Technology Should Be Piezo Resistive 17. Should Be Supplied With A Padded Carry Bag. 18. Should Be Supplied With 2 Additional Dummy Platforms 19. System Should Not Need A Separate Electrical Supply And Should Draw Power From The Computer. 20. The Complete System Should Have 3-Year Hardware Warranty Period Along With Software Updates And Tech Support. Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Punjab View Result →
15.
Educational and Research Institute #11317498 Price Bid
Tender for Purchase Of Lab Equipments Foreee Dept , Purchase Of Lab Equipments For Eee Dept , Single Phase Transformer. Itemcode:B002 Single Phase Transformer,Rating: 1 Kva, 50 Hz, Input: 230 V Ac Output: 115 V Ac,Type: Air-Cooled, Single-Phase Step-Down Transformer  Properly Insulated Input And Output Terminals Brought Out For  Safe Operation). , Acidity Test Kit Itemcode:B005 Specifications: Ethyl Alcohol Sodium Carbonate Solution Universal Indicator Solution Laboratory-Grade Test Tubes Droppers Colour Comparison Chart For Test Result Comparison Chemicals Supplied In Labelled Containers With Safety Instructions Suitable For Laboratory Educational And Testing Applications , Dc Stepper Motor Drive Kit With Stepper Motor Itemcode:B010 Specifications: Stepper Motor : Permanent Magnet / Hybrid Type With Suitable Driver Circuits. Motor Operating Voltage : 12-24 V Dc Variable Speed Control Forward And Reverse Direction Control Full Step And Half Step Operation Manual / Automatic Pulse Generation Facility Built-In Regulated Dc Power Supply Led Indication For Phase Sequence And Status Test Points Provided For Waveform Observation Start / Stop Control Switches To Be Provided Overload And Short Circuit Protection To Be Provided Mounted On Compact Powder Coated Cabinet With Printed Circuit Diagram Proper Insulated Terminals And Interconnecting Leads To Be Provided Patch Chords For Interconnection , Dc Servo Motor Drive Kit With Servo Motor Itemcode:B011 Specifications: Input Supply : 230 V Ac, 50 Hz Servo Motor Type : Dc Servo Motor With Feedback Arrangement Motor Operating Voltage : 12-24 V Dc Controller Type : Microcontroller Based Servo Drive Controller Speed Control : Variable Speed Control To Be Provided Position Control : Angular Position Control Facility To Be Provided Direction Control : Forward And Reverse Operation Feedback Device : Encoder / Potentiometer Based Feedback System Built-In Regulated Dc Power Supply Led Indications For Power And Status Test Points To Be Provided For Signal Observation And Analysis Start / Stop Control Switches Provided Overload And Short Circuit Protection To Be Provided Mounted On Powder Coated Cabinet With Printed Circuit Diagram Proper Insulated Terminals And Interconnecting Leads To Be Provided , Three Phase Resistive Load Itemcode:B013 Specifications: Rating: 5.25 Kw Supply: 415 V Ac, 3-Phase, 50 Hz Total Number Of Load Steps: 6 Main Switch To Be Provided Approximate Dimensions: 18 × 18 × 22 Inches (L × B × H) Comprising Special Cement-Insulated Electrical Load Resistors Mounted On Powder-Coated Ms Panel/Enclosure Individual On/Off Rotary Switches For Load Selection Mounted On Rubber Wheels/Casters For Portability Suitable For Laboratory Load Testing Applications Proper Insulation, Ventilation, And Earthing Arrangement To Be Provided , Single Phase Single Pulse / Sinusoidal Pwm Inverter Using Mosfet/Igbt Kit Itemcode:B028 Specifications: Type : Single Phase Pwm Inverter Trainer Power Device : Mosfet / Igbt Based Inverter Circuit Input Supply : 12-24 V Dc Output Voltage : 30 V Rms Ac Output Phase : Single Phase Output Frequency : 0-50 Hz Variable Output Power : 100 W Single Pulse Pwm Operation Sinusoidal Pwm (Spwm) Operation Variable Frequency Control Pwm Generation And Firing Control Circuit Inbuilt Gate Drivercircuit Provided Test Points Provided For Waveform Observation And Analysis Built-In Resistive Load Provision , On / Off Control Of Lamp Using Solid State Relay Kit Itemcode:B029 Specifications: Type : Solid State Relay (Ssr) Trainer Kit Control/Input Voltage : 12 V / 24 V Dc Or Up To 30 V Dc Output Load Voltage : 230 V Ac, Single Phase Load Control : On/Off Control Of Ac Lamp Load Solid State Relay Based Switching Circuit Opto-Isolated Input Control Built-In Ac Lamp Load Manual On/Off Switching Arrangement Led Indication For Input And Output Status , Speed Control Of Ac Motor Using Vfd Drive Module With Ac Motor Itemcode:B030 Specifications: Type : Variable Frequency Drive (Vfd) Module Input Supply : 415 V Ac, Three Phase, 50 Hz Output : Three Phase Variable Voltage And Variable Frequency Ac Output 1 Hpthree Phase Squirrel Cage Induction Motor415 V Ac 50 Hz &1440 Rpm Control Technique : Pwm / Spwm Based Control Frequency Range : 0-50 Hz Variable Digital Display For Frequency And Operating Parameters Start / Stop And Forward / Reverse Control Acceleration And Deceleration Control Facility Powder Coated Ms Control Panel Tabletop / Floor Mounted Laboratory Type Setup Clearly Labelled Circuit Diagram And Control Switches Proper Insulated Terminals And Earthing Arrangement , Plc Tranier Kit Itemcode:B031 Specifications: Plc Make :Allen-Bradley / Delta Electronics / Siemens Or Equivalent Digital Inputs : 8-20 Nos. Digital Outputs : 6-12 Nos. Analog Inputs 2 Numbers - 0-10 V (Led / Relay Type Indication) Communication Port : Rs232 / Usb / Ethernet (If Available) Programming Method : Ladder Logic Programming Toggle Switches For Digital Input Simulation Led Indicators For Output Status Indication Analog Potentiometers For Analog Input Experiments Proximity Sensor Interface Provided Relay Output Interface Provided Input Supply : 230 V Ac, 50 Hz Built-In Regulated 24 V Dc Power Supply Ladder Diagram Programming Software To Be Provided Compatible Programming Software License To Be Provided Suitable For Basic Plc Programming And Automation Experiments , Dol Starter Interfacing Kit Itemcode:B032 Specifications: Starter Type: Dol Starter Supply: 3-Phase, 415 V Ac, 50 Hz Motor Compatibility: 1 Hp To 3 Hp Induction Motor Components: Contactor (Ac-3 Duty) Thermal Overload Relay Push Buttons (Start/Stop),Control Voltage: 12 V / 24 V Dc (Isolated),On/Off Status Indicators Fault Indication (Overload Trip) Phase Indication Lamps,Overload Protection (Thermal Relay) Short-Circuit Protection (Mcb/Mccb), Wiring Diagram Displayed On Panel , Star Delta Starter Interfacing Kit Itemcode:B033 Specifications: Supply: 3-Phase, 415 V Ac, 50 Hz Motor Compatibility: 3 Hp To 5 Hp Induction Motor, 3 Contactors: Main Contactor Star Contactor Delta Contactor Thermal Overload Relay Timer (Adjustable Star-Delta Transition, Control Voltage: 12 V / 24 V Dc (Isolated) Interface Type: Relay-Based Isolation) Push Buttons (Start/Stop), Automatic Mode (Timer-Based), Phase Indication Lamps (R, Y, B) Star Mode Indicator Delta Mode Indicator Overload/Fault Indication, Overload Protection (Thermal Relay) Short-Circuit Protection (Mcb/Mccb) Phase Failure / Phase Sequence Protection (Recommended) Electrical Interlocking (Star ↔ Delta) Mechanical Interlocking Between Contactors , Conveyor Arrangement With Sirenitemcode:B034 Specifications: Input Supply : 12 V Dc / 24 V Dc / 230 V Ac, 50 Hz Control Mode : Manual / Automatic Operation Using Plc Conveyor Arrangement With Geared Dc Motor Provided Proximity Sensor Provided For Object Detection Start And Stop Push Buttons Provided Audio Siren Indication Provided Plc Based Control And Sequencing Operation Provided Mini Conveyor Setup Suitable For Laboratory Demonstration Geared Dc Motor Driven Conveyor Mechanism Smooth Belt Movement With Roller Arrangement , 3 Floor Lift Interfacing Model Itemcode:B036 Specifictions: Type: Table-Top Lift Model Floors: 3 Levels Structure: Transparent Acrylic / Ms Frame Cabin: Moving Lift Car With Guide Rails Drive: Dc Geared Motor / Steppermotor Motion: Up/Down Movement, Floor Indication Leds (1, 2, 3) Direction Indicators (Up/Down), Start & Stop Atevery Stage, Over Load Limit Control Three-Floor Lift Operation Plc Interfacing And Programming Floor Selection Logic Automatic Stopping At Floors Direction Indication System Educational Demonstration Of Elevator Automation.. 24 Volts Control Voltage From Plc.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Tamil Nadu View Result →
16.
Defence #11302318 AOC
Bids Are Invited For Albumin System Pack 10X44 Ml , Alkaline Phosphates 2X44 2X11 Ml , Bilirubin Direct 6X44 6X123 Ml , Bilirubin Total 6X44 6X123 Ml , Cholesterol 10X44 Ml , Creatinine Enzymatic 5X305X10 Ml , Direct Hdl 4X30 4X10 Ml , Glucose 10X44 Ml , Sgot Ast 6X44 6X125 Ml , Sgpt 6X44 6X125 Ml , Total Protein 10X44 Ml , Triglyceride 5X44 5X11 Ml , Urea 5X44 5X11 Ml , Uric Acid 5X44 5X11 Ml , Hba1C With Calibrator 2X152X55X05 Ml , Calcium 5X6 Ml , Multicalibrator 4X3 Ml , Erba Norm 1X5 Ml , Erba Path 1X5 Ml , Pm Kit For Em200 , Control For Hematology Analyzer Erba H360 , Cell Clean Solution For Erba H360 4X50 Ml , Erba H360 Diluent 20 L , Glucose Reagent , Cholesterol Reagent , Triglyceride , Bilirubin Total , Bilirubin Direct , Sgot Reagent , Sgpt Reagent , Alkaline Phosphates Reagent , Urea Reagent , Creatinine Reagent , Uric Acid Reagent , Ra Factor Qualitative 1X14 Ml , Crp Qualitative Test Kit 1X14 Ml , Rapid Dengue Kit Iggigm , Rapid Dengue Antigen Ns1 , Rapid Hiv Iii Card , Rapid Hbsag Card , Rapid Hcv Card , Rapid Typhoid Ab Card Typhidot , Widal Test Kit Slide Method 4X5 Ml , Abo Blood Grouping Kit 3X12 Ml , Tuberculin Antigen 05 Tu , Tuberculin Antigen 10 Tu , Reticulocyte Stain Kit , Pap Stain Rapid Kit , Grams Stain Kit 4X50 Ml , Zn Stain Kit 3X125 Ml , Vacuum Tube Edta 2Ml Pack Of 100 , Vacuum Tube Yellow Capped Gel With Clot Activator Pack Of 100 , Vacuum Tube Sodium Fluoride Pack Of 100 , Disposable Syringe 10Ml , Tourniquet Quick Release , Examination Gloves Pack Of 100 Pc , Surgical Gloves , Glass Slide Frosted 75X25 Mm 50 Slides In One Box Grease Free , Cover Slip 18X18 Mm 10G Box 20 Boxes In A Pack , Disposable Esr Pipette Westergreen , Disposable Micro Tip Small 0100 L , Disposable Micro Tip Large1001000 L , Micro Tip Stand , Sterile Urine Container 60 Ml , Surgical Spirit 1L , Spirit Swab 100 Pc In One Pack , Hydrogen Peroxide 500 Ml , Sodium Hypochlorite 10 5L , Urine Strips 2 Parameters Pack Of 100 , Urine Strips 10 Parameters Pack Of 100 , Rapid Card For Stool Occult Blood Hem Spot Pack Of 25 Pcs , Wash Bottle 500 Ml Plastic Squeeze Bottle With Dispensing Nozzle , Dropper Plastic 1 Ml , Dropper Plastic 05 Ml , Litmus Paper Ph Paper , Cedar Wood Oil 25 Ml , Labolene Cleaning Solution 5L , Cleaning Brush For Tubes , Hand Sanitizer 500 Ml , Slide Storage Box Hard Plastic For 50 Slides , Slide Standing Platerack , Slide Tray Aluminum Total Quantity : 6362
Contract Date: Ref. Documents Contract Value : ₹ 4.79 Lakh
Government Departments No of Bidders 5
Chandigarh View Result →
Haryana View Result →
18.
Defence #11295821 AOC
Bids Are Invited For Laryngoscope Cell 1.5 V Dia 13 Mm And Length 51 Mm For , Hand Gloves,Size 7 Pair Of , Hand Gloves, Size 7 1 2 Pair Of , Bp Cuff For Digital Bp Apparatus , Syringe Disposable, Plastic, Sterile, 5 Ml With Needle , Syringe Dosposable, Plastic Sterile,10 Ml With Needle , Vaccum Blood Collection Tubes With Needles Edta 3Ml Violet , Vaccum Blood Collection Tubes With Needles Sterile Tube With Gel 5Ml Yellow , Adhesive Plaster Zinc Oxide 7.5 Cm X 5 Mtr , Abdominal Binder , Bandage Open Woven For Plaster Of Paris 10Cmx5M , Bandage Triangular , Cotton Wool, Absorbent Pkt Of 50 Gm , Cotton Wool, Absorbent Pkt Of 500 Gm , Dressing Sterile 8 X 8 Box Of 3 , Dressing Collagen Wound Management, Size 2 X 3 , Dressing Collagen Wound Management, Size 8 X 14 , Gauze Surgical, Open Wove, Unmedicated , Gauze Surgical, Open Wove, Unmedicated 60 Cm X 3 Metres Packet , Pad Abdominal Swab 25 X 25 Cm With Tape 30 Cm , Slab, Plaster Of Paris, 10 X 38 Cm, Tin Of 50 , Suspensory Scrotal , Surgeons Mask Disposable , Dressing Sterile 4 X 4 Box Of 5 , Polyglicaprone 3 0,70 75 Cm 3 8 Circle Cutting 20 35 Mm , Polyglicaprone Size 4 0 70 75 Cms 3 8 Circle Reverse Cutting 15 20 Mm , Nitrile Non Sterile Gloves Small , Nitrile Non Sterile Gloves Medium , Esr Western Greeen Tube Esr Pipette , Micropipettes, Tips For 1 200 Ul Small White , Micropipettes, Tips For 500 1000 Micro L Large Blue , Strips Albumin And Glucose Bottle Of 100 Strips Glucose And Protein 2 Parameter , Quickfix Tube Of 10Gm , Glucose Solution 5Perc In Non Toxic Disposable Plastic Bott Of 500Ml Ffs , Sodium Chloride Solution Isotonic In Nontoxic Disposable Plastic Bottle Of 500Ml Ffs , Elastic Knee Support , Tennis Elbow Support , Tab Aprimilast 20 Mg , Tab Sotalol 80Mg , Tab Mexiletine 150Mg , Torch Battery D Size , Tab Neurobion Forte , Syp Polybion Zincovit , Corn Cap Cap Vitamin E 400 Mg Evion , Inj Paracetamol Infusion 100 Ml , Tab Multivitamin, Multimineral With Grape Seed Extract Zincovit , Tab Lactobacillus Sporolac , Tab Rosuvastatin 10Mg , Inj Neurobion Forte , Tab Naproxen 500Mg , Tab Sodium Valporate Cr 500Mg , Tab Clobazam 10Mg , Tab Amitriptyline 10Mg , Tab Pyridoxin 100Mg , Acenocoumarol 3 Mg Tab Nicoumalone Acitrom , Tab Methotrexate 10Mg , Tab Rosuvastatin 20Mg , Tab Nebivolol 2.5Mg , Tab Acyclovir 400 Mg , Theraband Med , Tab Cilnidipine 10Mg , Tab Voglibose 0.3 Mg , Tab Telmisartan 20 Mg , Tab Metalar Xl 12.5 Mg , Tab Pantoprazole And Domperidone Pantop D , Trop T Kit , Tab Oxcarbazepine 450Mg , Tab Baclofen 20Mg , Tab Ezetimibe 10 Mg , Cyclosporin Cyclisis 0.05Perc Eye Drop , Tab Zonisamide 100Mg , Tab Dapagliflozin 10Mg , Tab Lacosamide 100 Mg , Cap Nitroglycerin 2.6Mg , Tab Duloxetine 10 Mg , Tab Risperidone 1Mg , Urine Sample Container , Tab Pantop It , Tab Escitalopram 20 Mg , Inj Prochloperazine 12.5 Mg Ml Stemetil , Pap Smear Sapatula With Cytobrach , Bandaid , Paracetamol Suppository Pcm , Ecg Paper For Bpl Cardiart 9108 , Pencil Cell Size Aa , Pencil Cell Size Aaa , Widal Test Igg Igm Rapid Cardtest Kit , Cell Clean For 3 Part Haematology Auto Analyzer Sysmex , Levosalbutamol Sulphate 2.5Ml , Oxygen Cylinder Refill 1246 Ltr , Inj Human Rabies Immunoglobulin , I Gel Size 4 , Cetaphil Salicilic Acid Lotion , Tab Briveracetum 50 Mg , Tab Biotin 5 Mg , Gabapaentin 400Mgand Nortriptylin 10Mg Tab , Bromhexine Syp 5 Ml Containing 4 Mg Of Bromhexine Hcl Bottle Of 100 150Ml , Tab Dienogest 2Mg , Cuvette For Erba 200 Fully Biochemistry Analyzer , Tab Piracetam 800Mg , Tab Acebrophylline 200 Mg , Tab Pancreatin Microspheres 300 Mg , Tab Mefanamic Acid 500Mg , Oxygen Cylinder Refill 7000 Ltr Jumbo , Tab Silodosin 08 Mg And Dutasteride 0.5 Mg , Pm Kit For Fully Automatic Analyzer , Stromatolyser For 3 Part Haemato Auto Analyser , Diluent 20 Ltr Meril Cellcount Edge , Result Printing Paper Meril Cell Count Edge , Vigabatrin Sachet 500Mg , Syp Docosahexanoic Acid And L Carnosole Ignicar D Plus , Vitamin D3 400 Iu Ml Drops 30 Ml , Tab Thyroxine 125 Mcg , Tab Coenzyme Q10 Flaxseedandcoenzyme Q10Andl Carnitinandl Tartrateandl Arginineandwheat Grampowderandsod Selenate , Tab Benfomet Forte Benformetandflavi Monucoletideandbiotinandmethylcoblaminandminirals , Tab Tacrolimus 2 Mg , Tab Farobact 200 Mg , Minoxidil 2 Perc Lotion Bott Of 60 Ml , Tab Semaglutide 7 Mg , Tab Mycophenolate 360 Mg Mycept S , Tab Tacrolimus 1 Mg Pangref , Tab Orlistat 120 Mg , Paracetamol 325 Mg , Cetrizine 5 Mg And Phenylephrine Hcl 10 Mg Tablet Common Cold , Multical Xl For Erba 200 Fully Biochemistry Analyzer , Erba Norm System Pack For Erba 200 Fully Biochemistry Analyzer , Erba Path System Pack For Erba 200 Fully Biochemistry Analyzer , Auto Wash Acidic Alkaline Em 200 For Erba 200 Fully Biochemistry Analyzer , Kit For Estimation Of Ldl Cholesterol For Erba 200 Fully Biochemistry Analyzer Total Quantity : 67252
Contract Date: Ref. Documents Contract Value : ₹ 22.93 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Karnataka View Result →
Delhi View Result →
20.
Public Administrative Department #11286668 AOC
Tender For Construction/Repair Work In Record Room/Nazarat Department - (a) Bricks M-150 2 (b) Bricks M-100 3 (c) Bricks-Straight over brunt 4 (d) Bricks- Tiles (Ist Class) 5 (e) Brick Bats M-75 6 (f) Brick Bats (O.B.) 7 Fly ash Bricks (specification/strength should not be less then Bricks M-150)size 230x110x75mm 8 Fly ash Bricks Tiles (specification/strength should not be less then Bricks M-150)size 230x110x38mm 9 Fly ash Concrete curve Stone (specification/strength should as per mord/morth) size 300x300x150mm (M30) 10 (a) 5.00cm. Gauge 11 (b) 4.00 cm. gauge 12 (c) 2.50 cm. gauge 13 Stone Grading Materials Aggregate - For 37.5 mm Maximum size - 22.4 mm to 5.6 mm 14 Aggregate - For 37.5 mm Maximum size - 45 mm to 22.5mm 15 Aggregate - For 37.5 mm Maximum size - Below 5.6 mm 16 Aggregate - For 53 mm Maximum size - 22.5 mm to 5.6mm 17 Aggregate - Grading I (40 mm nominal Size) 10 mm - 5 / 4.75 mm 18 Aggregate - Grading I (40 mm nominal Size) 25 mm – 10mm 19 Aggregate - Grading I (40 mm nominal Size) 37.25 mm -25mm 20 Aggregate-Grading I 90 mm to 45 mm 21 Aggregate-Grading II 63 mm to 45 mm 22 Aggregate-Grading III 53 mm to 22.4 mm 23 Aggregates 22.4 mm to 2.36 mm for wet mix macadam 24 Aggregates 45 mm to 22.4 mm for wet mix macadam 25 Crushed Sand or Grit Passing 2.36 mm and retained on 180 micron 26 Crushed Stone Aggregate 26.5 mm to 75 micron 27 Crushed Stone chipping 13.2 mm nominal size 28 Crushed Stone Chipping 6.7 mm size 100% passing 11.2 mm and retained on 2.36 mm 29 Crushed Stone Chipping 6.7 mm size 100% passing 9.5 mm and retained on 2.36 mm 30 Crushed Stone chipping 9.5 mm nominal size 31 Crushed Stone Coarse Aggregate Passing 53 mm and retained on 2.8 mm 32 Fine aggregate/Crushed sand 2.36 mm to 75 micron 33 Stone Boulder of size 150 mm and below 34 Stone for Coarse Rubble Masonry 1st Sort 35 Stone for Coarse Rubble Masonry 2nd Sort 36 Stone for Random Rubble Masonry 37 Stone for Stone Set Pavement (300 mm x 200 mm x 150MM 38 Well Graded Material for Sub-Base - Grading I 2.36 mm below 39 Well Graded Material for Sub-Base - Grading I 53 mm to 9.5 mm 40 Well Graded Material for Sub-Base - Grading I 9.5 mm to 2.36 mm 41 Well Graded Material for Sub-Base - Grading II 2.36 mm below 42 Well Graded Material for Sub-Base - Grading II 26.5 mm to 9.5 mm 43 Well Graded Material for Sub-Base - Grading II 9.5 mm to 2.36 mm 44 Well Graded Material for Sub-Base - Grading III 2.36 mm below 45 Well Graded Material for Sub-Base - Grading III 4.75 mm to 2.36 mm 46 Well Graded Material for Sub-Base - Grading III 9.5 mm to 4.75 mm 47 Boulder with minimum size of 300 mm for Pitching at Site 48 Granular Material or hard murrum for GSB works at Site 49 Close graded Granular sub-base Material 37.5 mm to 9.5 mm 50 Close graded Granular sub-base Material 9.5 mm to 4.75 mm 51 Close graded Granular sub-base Material 4.75mm to 75 micron mm 52 Close graded Granular sub-base Material 2.36 mm 53 Coarse graded Granular sub-base Material 4.75mm to 75 micron mm 54 Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm 55 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 56 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 57 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 58 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 59 Coarse graded Granular sub-base Material 53 mm to 26.5mm 60 Stone screening material for WBM Grading-2 and 3 61 Miscellaneous Items Cement Grey PPC 62 Cement Port land (ordinary) 63 Cement white viz J.K./Birla 64 Wall Putty J.k / Birla white 65 Plaster of Parish Sakarni or eqvivalent 66 Cinder 67 Distemper oil bound 68 Dry Distemper ordinary of bes quality (Approved manufacture and approved quality viz. Burger, Asian, J&N 69 Glass Ordinary cut to size (a) 3mm thick (Wt. 7.5 Kg./sqmt.) 70 (b) 4mm thick (Wt. 10.0 Kg/sqmt.) 71 (c) 5.5 mm thick (Wt. 13.5 Kg/sqmt.) 72 White lime (unslacked) for White Washing 73 White Lead (Best Quality PIG Lead) 74 (d) G.I. Barbed wire 75 (e) Iron Sheet Galvanized Plain 22 gauge 76 (f) Iron Sheet Galvanized Plain 24 gauge 77 (g) -do- but corrugated 24 gauge 78 (h) -do- but black plain 18 gauge 79 (J) Expanded metal 2-0 cm mesh 16/17 guage 80 (K) M.S. binding wire 24 gauge 81 (i) 1x2 size of 10 gauge wire 82 (ii) 1x3 size of 10 gauge wire 83 (iii) Murga Jali 1/2x24 gauge 84 (iv) 1x2 size of 10 gauge wire 85 (i) F -d sections @ 1.58 Kg/R/M 86 (ii) F -B/T/T Secs. @ 2.40 Kg/R/M 87 (iii) F - Sections @ 0.74 Kg/R/M 88 (a) Super white 89 (b) Commercial white, coloured & black 90 Marble Dust (200 mesh) 91 Nails (Country) 92 Nails (Wire) 93 (a) Oil (linseed double boiled) 94 (b) Oil (Terpentine) 95 (a) Paint anticorosive Bitumenous 96 (b) Black Japan 97 (c) Superior Ready Mixed paints (Grade II) in 20 ltrs. Drums of approved manufactures and aporoved make 98 (i) Dark Green Oxide 99 (ii) Deep Black Oxide 100 (iii) Blue Oxide 101 (iv) Chocoiate Oxide 102 (e) (i) Red Oxide primer surface for steel (in 20 ltrs. Drum) (Approved manufactures and approved make) 103 (ii) Red lead paint ready mixed for roof (in 20 ltrs. Drum) (Approved manufactures and approved make) 104 (f)(i)PaintenamelGradeIsuperClass(Approved manufactures and approved make) 105 (ii) Paint (Aluminium) 106 (g) (i) Paint primer for wood 107 (ii) Paint primer for metal 108 (h) (i) Cement Primer of Berger or equivalent 109 (ii) Water proof cement paint (in 50 kg. drums) 110 (i) Clear synthetic (in 20 ltr drums) 111 (ii) Copall 112 (iii) Weather Coat cement paint for exterior 113 (iii) Weather Coat cement paint for exterior 114 Water Proofing compound (Dr. Fixit) 115 Polish (mansion & wax) 116 (iv) P.V.C. Pipe 110 mm dia & 6Kg./CM2 (ISI Marked) 117 (v) Same as above but 90 mm dia 118 (vi) Same as above but 75 mm dia 119 (v) Same as above but 140 mm dia 120 (a) Corrugated 121 (b) Plain 122 (i) Internal dia 5 cm (Wt. 11.41 Kg.) 123 (ii) Internal dia 7.5 cm. (Wt. 16.52 Kg.) 124 (iii) Internal dia 10 cm. (Wt. 21.67 Kg.) 125 (iii) Internal dia 15cm. (Wt. 21.67 Kg.) 126 (i) 5.0 cm dia (Wt. 2.30 Kg. ) 127 (ii)7.5 cm dia (Wt. 3.30 Kg.) 128 (iii) 10.0 cm. dia (Wt. 4.60 Kg.) 129 (i) 5.0 cm dia (Wt. 2.10 Kg. ) 130 (ii) 8.0 cm dia (Wt. 3.20 Kg.) 131 (iii) 10.0 cm. dia (Wt. 4.40 Kg.) 132 (c) C.I. Spout 23.0 cm Long 40 mm dia 133 (a) Rope (Moonj) 134 (b) Rope (HEMP) 135 (c) Rope (cotton) 136 (d) Spun yarn 137 Rivets 138 Coarse sand of approved quarry (Finess modules 2.20) at site of work in the district Saharanpur, Muzaffarnagar 139 Finesand(blendedtofineness modulus1.25) Saharanpur, Muzaffarnagar and Shamli 140 (a) Local Sand 141 Surkhi 142 White lime (slacked) 143 (a) Washers (Lumpet) 144 (b) Washers (Bitumen) 145 (c) Washers G.I. 146 J.Hooks 147 Wood presevator in 5 ltrs. Pack. 148 (a) Teak wood 149 (b) Sheesham 150 (c) Indian Sal 151 (a) Teak wood 152 (b) Sheesham 153 (c) Indian Sal/ maleshien 154 Fuel Wood (Dry) 155 (a) 2.2 cm width 156 (b) 3.50 cm. width 157 (c) Same as 48 (a) but 5 mm thick 158 (d) Same as 48 (b) but 5 mm thick 159 Antitermite treatment oil concentrate to 0.30 (as per IS 1307) 160 (i) 40mm thick 161 (ii) 50 mm thick 162 (a) KOTASTONE (machine cut ) 60 x 60 cm. 163 (a) Marble White 60 x 60 cm. 164 (b) Marble White 60 x 60 cm. 165 Granite stone black or Grey Polished 166 Granite stone black or Grey Polished 167 Polythene Sheet (125 Micron) 168 Plastic waste which is cleaned is cut into a size between 2.36mm and 600 microns and of maximum size 2.36 mm length and 2.00mm width. 169 (a) For Floor Size 300 x 300 170 (b) For Wall Size 200 x 300 171 (c) Vitrified Tiles size 600 x 600 172 RCC Hume Pipe 350mm dia 173 RCC Hume Pipe 450mm dia 174 (a) Ordinary 175 (b) For floor and tile work 176 Carpenter 177 Black Smith 178 Hammer man 179 Fitter 180 Painter 181 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 182 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 183 (b) Electrician Licensed with Kit or Koshal vikash certificate 184 (b) Electrician Licensed with Kit or Koshal vikash certificate 185 Mate 186 Beldar / Mali 187 Bhishti with Mushk 188 White Washer 189 Belder for bitumen or tar work 190 Glazier 191 Bhainsa Buggi with driver 192 Tractor trolley with driver excluding P.O.L. 193 Amin/Tracer 194 Chaukidar 195 Jeep/Truck/Tractor/Roller Driver 196 Generator Operator 197 Mixol Operator 198 Pump Operator 199 Cleaner 200 Sweeper (Full Time) 201 Sweeper (Part Time) 202 Tractor with harrow or water TankerTrolly with 203 Tractor with harrow or water TankerTrolly with 204 driver and P.O.L. 205 J.C.B. Machine with driver with P.O.L. 206 Crane (20-50 Tonnee) with Driver and P.O.L. 207 Ricksaw Thela with Driver 208 (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) 209 (a) As in item 251 (a) above but excavation in soil mixed with Moorum, shingle, kankar requiring the use of special tools and plant such as pickaxes, sabbals etc. (where machine can not move ) 210 (a) Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. (Royality removed by Govt. ) for small works/ Abadi area. (where machine can not move ) 211 (a)Add to items (251-253) for every additional 30 M. (100 ft.) lead or part of 30 M (100 ft.) or for every additional 1.50 M. (5 ft.) lift or part of 1.50 M. (5 ft.) 212 (a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measuredat a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. 213 (i) Cleaning jungle including up rooting ofrank, vegetations grass, push, wood trees and amplings of grith upto 30 cms. measured at a height of 1 M. aboveground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared. 214 (a) Same as above 259(i) above but grass only. 215 (a) Add to item no. 253 (a) for mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc. 216 (b) As in item no. 260 (a) above but for departmental works excluding Roller charges and its fuel, cost of water, allT&P. and sundries etc. but including carriage of water to site. 217 Upto ½ Km 218 Ist Km. (If lead is beyond ½ Km.) 219 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 220 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 221 As in item 273 above but in proportion 10:5:1 222 As in item 273 above but in proportion 8:4:1 223 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 224 (b) Same as item no. 279 (a) but in proportion of 1:3:6 225 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 226 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 227 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 228 As in item 273 above but in proportion 10:5:1 229 As in item 273 above but in proportion 8:4:1 230 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 231 (b) Same as item no. 279 (a) but in proportion of 1:3:6 232 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 233 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 234 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 235 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 236 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 237 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 238 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 239 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 240 As in item 309 above but for walls of one brick thick, add for extra labour 241 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 242 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 243 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 244 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 245 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 246 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 247 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 248 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 249 As in item 309 above but for walls of one brick thick, add for extra labour 250 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 251 Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 252 As in item No. 401 but for sheesham wood 253 As in item no. 401 but with Indian Sal wood 254 Supply & fixing of 4.5 Cm. thick teak wood part panelled and part glazed door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glass to be 4 mm. thick. Fitting with necessary screws to be supplied by the deptt. 255 Providing and fixing Glass panes with teak wood beading in doors and windows as desired by the Engineer incharge including cost of all materials, fittings, hinges, labour, T&P all etc. required for proper completion of the work. 256 As in item no. 409 above but fully panelled. 257 As in item no 409 above but fully glazed. 258 As in item no. 409 above but 3.8 cm. thick. 259 As in item no. 411 above but 3.8 cm. thick. 260 As in item no. 412 above but 3.8 cm. thick. 261 As in item no. 409 above but 3.8 cm. thick, Shisham wood. 262 As in item no. 411 above but 3.8 cm. thick, Shisham wood. 263 As in item no. 412 above but 3.8 cm. thick, Shisham wood. 264 Supply and fixing of 3.8 cm. (1½) thick Teak wood door and window shutters with panels of heavy Quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm. (1/10 or 1/12 or 1/16 inch) mesh or any other size, with necessary beadings, including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including two coat of black Japan on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 265 As in item (450) above but in shisham wood. 266 Supply and fixing Galvanized Mosquitos proof heavy quality S.S.Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3x3/8)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. 267 As in item (455) above but with shisham wood battens. 268 As in item (455) above but with Indian Salwood battens. 269 As in item (455) above but with Deodar wood battens. 270 As in item no. 409 but Indian Commercial flush shutters 35 mm. thick (excluding cost of all fitting). 271 As in item no. 409 but Indian Commercial flush shutters 32 mm. thick (excluding cost of all fitting). 272 As above 471 but Double Leaf Add. extra. 273 Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) 274 As above item no. 473 Aluminium Fittings ISI marked. 275 Supply and fixing of 3.8 cm. (1½) thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings 276 Supply and fixing 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fitting and glass panes (Double Leaf) 277 As in item no. 9.26 above but for single leaf. 278 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 279 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 280 As in item no. 9.29 above but for single leaf. 281 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 282 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 283 As per item above A but with shisham wood batton 284 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 285 Fixing of Curtain rods (Labour only) 286 Fixing of Curtain palmets (Labour only) 287 50x20 mm 288 50x12 mm 289 With 2nd class teak wood beading 62X19 mm. 290 300x16 mm 291 250x16 mm 292 250x10 mm 293 200x10 mm 294 150x10 mm 295 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 296 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 297 As in item no. 9.29 above but for single leaf. 298 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 299 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 300 As per item above A but with shisham wood batton 301 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 302 Fixing of Curtain rods (Labour only) 303 Fixing of Curtain palmets (Labour only) 304 50x20 mm 305 50x12 mm 306 With 2nd class teak wood beading 62X19 mm. 307 300x16 mm 308 250x16 mm 309 250x10 mm 310 200x10 mm 311 150x10 mm 312 250x10 mm 313 200x10 mm 314 150x10 mm 315 100x10 mm 316 125 mm 317 100 mm 318 75 mm 319 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI C sections (39mm x 19mm x O.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric L corners .The panel shall be filled with 3mm thick high - pressure compact laminate asper manufacturers specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). 321 With decorative veneering on one side and commercial veering on other side. 322 With non decorative veneering on both sides. 323 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 324 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 325 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 326 Same as in items 502 above but steel Z Section window excluding Glass panes.(ii) Openable panels 327 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 328 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 329 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 330 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 331 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 332 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 333 with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 334 As per item no 517a but with steel strip inplace of angle iron. 335 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 336 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 337 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 338 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 339 providing and fixing top cover for rolling shutters 2.50 meter wide. 340 Providing and fixing ball bearing for rolling shutters. 341 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 342 (b) Shutters above 16.8m² (180 sqft) area 343 (i) Door chaukhat 344 (ii) window chaukhat 345 (iii) Ventilator chaukhat 346 (iv) Stair case Nosing 347 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 348 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile B 349 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile C 350 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile E 351 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 352 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 353 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 354 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 355 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 356 Same as in items 502 above but steel Z Section window excluding Glass panes. (ii) Openable panels 357 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 358 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 359 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 360 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 361 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 362 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 363 Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 364 As per item no 517a but with steel strip inplace of angle iron. 365 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 366 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 367 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 368 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 369 providing and fixing top cover for rolling shutters 2.50 meter wide. 370 Providing and fixing ball bearing for rolling shutters. 371 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 372 (b) Shutters above 16.8m² (180 sqft) area 373 (i) Door chaukhat 374 (ii) window chaukhat 375 (iii) Ventilator chaukhat 376 (iv) Stair case Nosing 377 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 378 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B 379 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 380 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E 381 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 382 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 383 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. 384 Same as in item 574 above but Flush pointing Deduct from item 574. 385 Same as in item 574 above but in floors deduction from item 574 & 575. 386 Struck cement pointing with 1:2 cement and fine sand of 1.25 F.M. mortar with colouring including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 387 12 mmthick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. 388 As in item (582) above but with cement and approved coarse sand mortar in 1:3. 389 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:4. 390 As per Item No. 584 but with 1:4 cement and Corse sand 391 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:6. 392 Add for extra labour to all item of plaster if done ceiling. 393 Add for extra labour and materials for plaster over rough face of one brick wall. 394 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 395 Same as above item but 1.20cm. thick instead of 2 cm thick. 396 Engraving lines in plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-incharge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (add for extra labour to all items of plaster), 397 Marking drip coarse in sun shades or facie with 1:3 cement and fine sand mortar as per direction of Engineer-in-charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 398 20 mm thick rough cast exterior cement plaster on walls consisting 10 mm thick backing cast of 1:3 cement mortar (1 cement :3 coarse sand) and 10 mm thick finishing coat of 1:3 cement mortar (1cement :3 coarse aggregate of size 6mm to 12 mm ) including arises, chamfers and/or rounded angles not exceeding 80 mm. 399 2.5 cm (1) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid in panels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 400 (A) As in item no. 601 above but without base concrete. 401 (B) As in item no. 601 above but base concrete consisting of brick ballast and fine sand & cement in prop. 12:6:1 402 As in item (601) above but floor shall be 4 cm (1½) thick instead of 2.5 (1) thick and without base concrete. 403 Add in item (601) to (603) and (605) when floors are polished including supply of extra cement, chapra batti, Carborandum stone, all other materials, labour, Tools & plants etc. required for proper completion of the work. Marble dust shall be added in the floting coat in ratio of 5:1 (cement and marble dust) if necessary but no extra amount will be paid for it. This includes final finish with french mansion polish or any other approved polish. 404 M-150 Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming including supply of all materials labour and Tools and Plants etc. required for proper completion of the work. 405 As in item (615) above but bricks laid flat. 406 Granolithic marble flooring 2.5 cm. (1) thick consisting of 2 cm. (3/4) thick layer of 1 part cement, 2 parts of approved coarse sand and 4 parts of 2 cm. (3/4) graded approved stone chips including 5 mm (¼) thick surface coat with ordinary cement, black and white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 1.5 mm. (1/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-incharge and polished by hand or machine and finally finished with French Mansion Polish or any other approved polish and including 8 cm (3) 1:6:12, concrete base, including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work 407 As in item (620) above but when white cement is used in top 5 mm (¼) layer. 408 As in item no. (620) above but when coloured floors are to be made. 409 Granolithic marble dado 2 cm. (¼) thick consisting of 15 mm. (9/16) thick layer of one part cement, 2 parts of approved coarse sand including 5 mm. (3/16) thick surface coat with ordinary cement black or white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 15 mm. (9/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-in- charge and polished by hand or by machine and finally finished with French Mansion Polish or any other approved polish including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work. 410 Same as item no. 625 above but 12 mm. thick dado. 411 As in item (625) above but when white cement is used in top 5 mm. (3/16) thick layer instead of ordinary cement. 412 As in item (625) above but when coloured dados are to be made. 413 Supply and fixing 6 mm. (¼) China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants 414 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (a) of 2.2 cm. depth 415 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (b) of 3.5 cm. depth 416 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (c) of 2.2 cm. depth and of 5 mm thickness 417 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete(d) of 3.5 cm. depth and of 5 mm thickness 418 Extra for making chequers of approved patterns on cement concrete, floor, steps landing etc. 419 Supply and fixing of Kota stone in floor ing 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 420 As in item no. New item (1) above but 25 mm thick. 421 Supply and fixing 10 to 12 mm thick Kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 422 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer - in- charge 423 Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. 424 As in item (641) above but for every coat after first coat. 425 As in item (642) above but for every coat on previously painted old wood or Iron work including its sand papering, rubbing and cleaning as required for proper completion of work. 426 Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 427 As in item (644) above but for every coat after the first coat. 428 As in item (645) above but for every coat over previously painted surface 429 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 430 As in item (647) above but for every subsequent coat on previously treated surface . 431 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 432 As in item (649) above but for every coat after the first coat. 433 As in item (649) above but for every coat after the previous coat or subsequent coat. 434 One coat hot coaltar on new surface including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 435 As in item (652) above but for every coat after the first coat or on previously treated surface. 436 One coat surface or other approved preservative on new wood work, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 437 As in item (654) above but for every coat or on previously treated surface. 438 Oiling wood work with double boiled linseed oil including supply of all materials labour, Tools & plant etc. required for proper completion of the work. 439 Removing paint or varnishing with paint remover or with caustic Soda, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 440 Polishing with French Polish or wax polish (in proportion 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by weight) on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth and a coat of wood filter including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 441 As in item No. (658) above but on previously polished wood or wood based surface. 442 Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 443 Same in item no. (660) but for each coat of water proof cement paint after the first two coat to give an even shade 444 Finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 445 Same aas item 660 but for weather coat. 446 Sameaasitembut over previouslypainted surface weather coat. 447 Providing cement primer on old/new surfaces 448 Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 449 Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 450 White washing one coat including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 451 As in item 671 above but Two coats. 452 As in item 671 above but Three coats. 453 Colour washing one coat using approved. Colouring material buff, blue, gray or brown shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 454 As in item 674 above but two coats. 455 As in item (674) but using approved colouring material of pink, green or yellow shade. 456 As in item 676 above but two coats. 457 As in item (674) above but colour washing with copper or iron sulphate one coat. 458 As in item 678 above but Two coat. 459 Cement washing including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 460 One priming coat and one coat of dry distemper on new work including supply of all materials, labour, Tools & plant etc. reqired for proper completion of work. 461 As in item (681) but for each coat of distemper after the first coat 462 Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 463 Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). 464 As in item (692) above but in mud mortar. 465 Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 466 Dismantling Jack arched or wooden beam and barga roofs including beam, roof concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 467 As in item (695) above but only roof concrete. 468 Dismantlingcementconcreteorbrickor granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 469 As in item (697) above but floor to be stone flagged or tiled floor. 470 Dismantling corrugated Iron roofs walls or partitions,includingpurlins,battensand vertical supports and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 471 Dismantling of girders, trusses and other steel work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 472 Dismantling doors or windows including chaukhats with hold fast and including stacking of materials as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 473 Dismantling doors or windows leaves including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 474 Dismantling doors or windows including chaukhats but excluding hold fast and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 475 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 476 Raking out joint of brick work in cement or lime morter to a depth 1 cm. (3/8) including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 477 Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 478 Supply and fixing of 10cm. (4) internal dia A.C. down pipes Everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3mm. (1 x1/8) fixed to walls with cement motar (1:2) and including supply of 15 cm (6) long 6mm. (1/4) dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. 479 As per item No. 730 above but for 10.0 cm. PVC down pipe.(kissan/suprime make) 480 As per item No. 730 above but for 7.5 cm. PVC down pipe. .(kissan/suprime make) 481 As per item No. 730 above but for 5.00 cm. PVC down pipe..(kissan/suprime make) 482 Providing and injecting chemical for preconstruction anttermite treatment and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding or pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 (part II 1981) Aldrine emulsifiable concentrate or any other approved material such as heptachlor of chlordane will be used. The rate of application of chemical emulsion shall be as follows :- 1.Treatment for massonary and foundation 5 liters per sqm. 2.Back fill in immediate contact with foundation 7.5 liters per sqm. 3.Treatment of surface of plinth filling 5 liters per sqm. 4.Treatment of soil along external perameter of Building 7.5 liters per sqm 5. Treatment of soil under external parameter 5 liters per sqm. 483 Providing & injecting chemical for post Constructional anti termite treatment with drilling holes at junction of floor with walls & pillars, the application of chemicals shall be as per relevant I.S. code and the rate of application of chemical shall also be as provided in the I.S. code, including quarterly inspection and providing required treatment for one year. As direction by the Engineer-in-charge. 484 Consolidation of Kankar by hand rammer including opening out stacks sorting kankar into three sizes, repairing patches in existing road suface with kanker making medhi to retain water and ramming and also including carriage of metal upto 30 meters (100 ft.) carriage of water 200 metre supply and maintenance of barriers and all tools and plants required for proper completion of work, kankar to be supplied to the contractor free at site. 485 (A) As in item No. 752 above but 12 cm. (loose) thick coat of stone ballast. 486 (B) As in item No. 755 (a) above but excluding roller charges. 487 (D) As in item No. 755 (a) above but upto 10 cm. (loose) thick coat. 488 (E) As item No. 755 (b) above but upto 10cm. (loose) thick coat. but excluding roller charges. 489 Water allowance to be allowed on item No. 751 to 756 including carriage & cost of water where water is not available at site. 490 Dag belling 15cm (6) deep in one line aligned with flags and jhandies as directed by Engineer- in-charge. 491 Painting white/coloured traffic lines 8-15 cm. wide in three coats with approved road making paint (spirit base) as directed by the Engineer- incharge, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 492 Painting on divider 1 priming and two coats of enamel paint including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 493 As per item above but every coat after Ist coat and on old surface 494 Brick soling with strainght over burnt bricks laid flat and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8) depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. 495 As in item No. 762(a) above but with bricks laid on edge. 496 M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8) depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. 497 Renewing patries 1.5 metere wide including dressing surface filling upto 8cm (3) depth and making namunas, at every 15 metre apart on either side of the road true to patri template with side slopes of 1:2 etc. trenches for taking the earth to be so dug that they form a continuous side drain at road boundary. 498 Brick lining on both side of the road of M-150 bricks 7 cm. wide. 11 cm. deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-charge. 499 Cleaning the existing painted /primed surface and laying premix 2cm. (3/4) thick over a tack coat with graded approved grit and bitumin (labour only) including heating the paint and grit to the required temperature and mixing either in mixer/ hand drum or by manual including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge . including labour charges for tack coat. 500 As in item No. 781 above excluding T&P and sundries etc. for departmental works. 501 As in item No. 781 above but in Patches. 502 As in item No. 781(a) but in Patches. 503 Cleaning the premix surface and laying seal coat with approved 6mm (1/4) graded grit and bitumin (labour only) including heating the paint to the required temperature and mixing either in mixer, hand drum including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge including all T&P and sundries to be arranged by the contractor but exculding roller charges and fuel wood. 504 As in item No. 783 above but in Patches. 505 Providing and applying primer coat over prepared surface of granular base with slow setting bitumen emulsion with spray set including cleaning of W.B.M. surface spreaying primer @ 0.6 kg/sqm (excluding emulsion) all labour T & P etc. as per MORT&H Specification. (labour rate only) in patches 506 Brick soling with straight over brunt bricks laid flat and dry (labour only) including preparation of subgrade to prescribed camber, filling joints with local earth spreading a blinding coat 1 cm (3/8) depth of local earth over the entire surface and including labour T&P etc.required for proper completion of the work.. 507 As in item No. 785 above but with bricks laid on edge. 508 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(i) 350 mm dia 509 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE (ii) 600 mm dia 510 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iii) 800 mm dia 511 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iv) 900 mm dia 512 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(v) 1000 mm dia 513 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work, (i) 350 to 600 mm dia 514 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work(ii) 800 to 1000 mm dia 515 (a) Laying and Consolidation of stone ballast in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 516 (b) Laying and Consolidation of Brick ballast/ bats in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 517 Barricating with approved wooden ballies vertical 10cm. Dia and 2m long fixed in ground 45 cm Deep and 2m apart including 2 rows of horizontal ballies not less than 8cm Dia 45 cm apart centre to centre tied by narial rope including cartage of all material and also including hire charges of ballies complete as direction of Engineer In charge. For two days 518 As item above but for more than 02 days. 519 As per item above but with three rows of horizontal ballies. 520 Dismantling of old brick laid on edge kharanja including stacking of old bricks . 521 As per item above but bricks laid flat / C.C. Interlocking tiles 522 Providing & laying of hot applied thermoplastic compound 2.5 m.m. thick including reflectorising glass beads @ 250 gms./Sq.mt. area. Thickness of 2.5 mm. inclusive of surface applied glass beads as per I.R.C. 2.35. The finished surface must be level, uniform and free from steaks and holes.Supplying & laying of Empty cement bags 523 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 524 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 525 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 526 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 527 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 528 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 529 Providing and laying of interlocking concrete Block pavement having thickness 60 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 530 Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 531 Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 532 Providing & supply gunny bags including cost of sand and stitching of bags and laying in position. 533 Laying of interlocking tiles (labour only) 534 Disposal or malba 535 primaxing carpet 20 mm 536 seal coat 537 earth work in filling 538 45-90 mm gauge stone ballast 539 53-22.4 mm gauge stone ballast 540 stone screening meterial 541 mild steel for rcc work 542 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes 543 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargeb) 20 mm dia. nominal outer dia Pipes 544 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargec) 25 mm dia. nominal outer dia Pipes 545 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charged) 32 mm dia. nominal outer dia Pipes 546 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargee) 40 mm dia. nominal outer dia Pipes 547 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. a) 15 mm dia. nominal outer dia Pipes 548 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes 549 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. c) 25 mm dia. nominal outer dia Pipes 550 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. d) 32 mm dia. nominal outer dia Pipes 551 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin- Charge. External work.. a) 15 mm dia. nominal outer dia Pipes 552 b) 20 mm dia. nominal outer dia Pipes 553 c) 25 mm dia. nominal outer dia Pipes 554 d) 32 mm dia. nominal outer dia Pipes 555 e) 40 mm dia. nominal outer dia Pipes 556 f) 50 mm dia. nominal outer dia Pipes 557 g) 62.50 mm dia. nominal outer dia Pipes 558 h) 75 mm dia. nominal outer dia Pipes 559 i) 100 mm dia. nominal outer dia Pipes 560 j) 150 mm dia. nominal outer dia Pipes 561 Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer-in- charge. a) 15 mm nominal bore 562 b) 20 mm nominal bore 563 Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. a) 15 mm nominal bore 564 b) 20 mm nominal bore 565 Providing and fixing ball valve (brass)ISI marked approved quality complete , High & low pressure with plastic floats complite as per direction of Engineer-in-charge.High or low pressure with plastic floats: a) 15 mm nominal bore 566 b) 20 mm nominal bore 567 c) 25 mm nominal bore 568 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 a) 15 mm nominal bore 569 Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms. a) 15mm nominal bore. 570 Providing and fixing C.P. brass stop cock (concealed) of approved quality confirming to ISI standards IS 8931 a) 15mm nominal bore. 571 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 a) 15 mm nominal bore 572 Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in- charge. 573 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White glazed earthen ware(Indian Type)/Neycer W.C. Pan 580 mm Dia. 574 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 575 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern 576 Single half stall urinal with 5 litre PVC. automatic flushing cistern 577 Range of two half stall urinals with 5 litre PVC. automatic flushing cistern 578 Range of three half stall urinals with 10 litre PVC. automatic flushing cistern 579 Range of four half stall urinals with 10 litre PVC. automatic flushing cistern 580 Single squatting plate with 5 litre P.V.C. automatic flushing cistern 581 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern 582 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern 583 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps 584 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 585 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 586 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 587 White Vitreous China Angle back wash basin of size 600x480 mm with single 15 mm C.P. brass pillar tap 588 White Vitreous China Angle back wash basin of size 400x400 mm with single 15 mm C.P. brass pillar tap 589 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 590 Providing and Fixing while vitreous china pedestal for wash basin completely at the back for the reception of pipes and fittings. 591 ProvidingandfixingStainlessSteelAISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 592 510x1040 mm bowl depth 250 mm 593 510x1040 mm bowl depth 225 mm 594 510x1040 mm bowl depth 200 mm 595 470x420 mm bowl depth 178 mm 596 Long pattern W.C. pan size of 580 mm 597 Orissa pattern W.C. pan size 580x440 mm 598 Providing and fixing water vitreous china pedestal type (Eurepean type/wash down type) 599 Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer–in- charge 600 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete.10 litre capacity – white 601 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 602 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete. Semi rigid pipe 32 mm dia / 40 mm dia 603 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 604 Providing and fixing soil, waiste and vent pipes: 100 mm dia Sand cast iron S&S as per IS - 3989 605 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 606 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 75 mm dia meter 607 Sand cast iron S&S as per IS - 1729 608 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 609 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 610 Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand): 100 mm dia 611 75 mm dia 612 50 mm dia 613 White vitreous china dual purpose W.C. pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend ISI Mark Kajaria eqvilent Indian made Brand. 614 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/6 litre (adjustable to 4 litre/ 8 litre), including seat cover and cistern fittings, nuts, bolts and gasket etc complete. ISI Mark Kajaria eqvilent Indian made Brand. 615 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design. 100x100 mm size P type 616 with common burnt clay (non modular) bricks of class-150 150x100 mm size p type 617 with common burnt clay (non modular) bricks of class-150 618 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg 619 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg 620 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensions 621 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter 622 Square shape 450 mm internal dimension 623 Circular shape 500 mm internal diameter 624 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg 625 Providing and fixing toilet paper holder standrad size ISI marked C.P. brass as per direction Engineer-in-charge 626 Painting letters upto 2.5 cm. size including supply of all materials, labour & tools and plants etc. required for proper completion of the work. 627 As in item 817 above but size above 2.5 cm. but upto 8 cm. 628 As in item no. 817 above 8 cm. but upto 15 cm. 629 Repairing letters upto 2.50 cm. size including supply of all meterials labour and tool and plants etc. required for proper comletion of the work 630 As in item NO. 820 above but size above 2.5 cm. but upto 8 cm. 631 As in item NO. 820 above but size above 8 cm. but upto 15 cm. 632 Painting Border line upto 2.5 cm. wide 633 Painting Border line upto 2.5 cm. to 5 cm. wide 634 Re-Painting Border line upto 2.5 cm. wide 635 Re-Painting Border line upto 2.5 cm. to 5 cm. wide 636 Repainting and relettering number plates on ends of parapets of culverts and bridges and boader line in letters height from 2.5 cm. to 8 cm. with approved enamael paint of superior quality including supply of all materials, labour and T & P etx. required for proper completion of the work. 637 Repainting and relettering of K.M. stones as per IRC design (except 5th km. Stone) with approved enemal paint of superior quality including supply of all materials, labour and T & P etc. required for proper completion of the work. 638 As in item 832 above but 5th km. stone 639 As in item 832 above but 200 H.M. stone 640 Varnishing /Painting on chair /side rack with stand and such other items including all matrial labour T&P etc. complite for proper completion of the work. 641 Varnishing /Painting on Double bed including all matrial labour T&P etc. complite for proper completion of the work. 642 Varnishing /Painting on Singal bed/ Sofa/ Dining table including all matrial labour T&P etc. complite for proper completion of the work. 643 Cutting and repairing of walls or windows for fitting of window type A.C. inculding wooden bidding after fixing. 644 White washing and hirmichi washing of culverts and trees upto a distance of 5 M. from the edge of black top in three bends of 1 width at a height of 1 M. from the crown of the road on either side of road. including supply of all materials, labour, T & P etc. required for proper completion of the work. 645 (a) Same as above but with departmental labour 646 Retro-Reflectorised Traffic Signs Direction and place identification signs up to 0.90 sqm Size BoardProviding and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 647 Direction and place identification signsMore then 0.90 sqm Size Board Providing and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 648 Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM. D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 649 Retro Reflective Signs (Type-IV Sheet) for both side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 650 Retro Reflective Signs (Type-IV Sheet) for both side ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 651 Retro-reflectorised Traffic sign as per IRC 67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm) 652 b) 60cm equilateral triangle with diffinitation plate size (20cm x 60cm) 653 c) 60 cm Circular with diffinitation plate (20 cm x 60 cm) 654 d) 80mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 655 e) 60mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 656 f) 60 cm x 60 cm square with diffinitation plate ( 20 cm x 60 cm) 657 g) 90 cm high octagon 658 h) 50 x 60 cm single chevron 659 i) 155 x 60 cm Double chevron 660 j) 30 x 90 cm (Left/Right) Object Hazard 661 k) 45 x 90 cm two way Object Hazard 662 l) 30 x 90 cm +45 x 78 cm Guarded/unguarded Railway crossing 663 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of work. 664 Supply, fixing and hoisting of 6.00-7.00 m. spanCantilever Structure in position with one vertical post of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffners & two nos. 8 mm thick MS plates at top welded with structure of 40 mm NB (M) pipe comprising of horizontal, vertical & bracing pipe of 32 mm NB (M) as per structural design requirements & approved drawing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of E/I charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the signage structure inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of the work. 665 Supply, fixing and hoisting of 12.00 - 15.00 M span Overhead Structure in position with two vertical posts of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffeners & two nos.10 mm thick MS plates at top welded with structure of 50 mm NB (M) pipe comprising of horizontal, vertical pipe of 40 mm NB (M) and bracing pipe of 32 mm NB (M) as per structural design requirements and approved drawing with vertical and lateral clearance given in clause 802.2 and design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of the work. 666 Reflective Raised Pavement Marker Providing and fixing of raised 667 Reflective Raised Pavement Marker with shanks Providing and 668 Supplying & fixing of Linear Delineator System (LDS)panels made of Micro prismatic Retro Reflective sheeting Type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing Concrite / brick work with 16 Nos Fastner/ screw as per IRC 79-2019 -Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work. 669 Providing & fixing of Bollard made (Single side) out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty,etc all T&P/machine material and labour required for proper completion of work. 670 Supply & fixing of Bollard (Double side) Made out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd. fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of work. 671 Metal Beam Crash Barrier 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 672 Metal Beam Crash Barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2.0 m high, 1.5 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete 673 TREE PLATE S/F Reflective tree plate having Size 15 Cm x15Cm, Consisting type XI sheeting over 1.5mm thick aluminium sheet including labour. Material T&P etc for proper completion of the work. 674 Cartage of Ballast, Kankar, Coal, Grit or Sand etc. including loading and unloading but excluding stackings on pucca roads. I st Km. 675 2 nd Km. 676 3 th Km. 677 4 th Km. 678 5 th Km. 679 6 th Km. 680 7 th Km. 681 8 th Km. 682 9 th Km. 683 10 th Km. 684 11 th Km. 685 12 th Km. 686 13 th Km. 687 14 th Km. 688 15 th Km. 689 16 th Km. 690 17 th Km. 691 18 th Km. 692 19 th Km. 693 20 th Km. 694 21 th Km. 695 22 th Km. 696 23 th Km. 697 24 th Km. 698 25 th Km. 699 26 th Km. 700 27 th Km. 701 28 th Km. 702 29 th Km. 703 30 th Km. 704 31st to 75 Km. 705 76st to 100 Km. 706 100st to 200 Km. 707 As in item (231) above but for cement, steel or other materials : Ist Km. 708 2nd and 3rd Km. 709 4th and 5th Km. 710 6th to 10th Km. 711 11th to 20th Km. 712 21st to 30th Km. 713 31st to 50th Km. 714 51 to 75 Km. 715 76th to 100 Km. 716 101st to 200 Km. 717 201st to 250 Km. 718 As in item (231) above but for tar, bitumen Asphalt, Mobile oil or other such materials 1st Km. 719 2nd and 3rd Km. 720 4th and 5th Km. 721 6th to 10th Km. 722 11th to 20th Km. 723 21st to 30th Km. 724 31st to 50th Km. 725 51st to 75 Km. 726 76th to 100 Km. 727 101st to 200 Km. 728 201st to 250 Km. 729 Cartage of brick/stone ballast, kankar coal shingle or sand etc. by head load upto 90 metres (3 chains) including loading and unloading but excluding stacking 730 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (a) Loading 731 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (b) Unloading 732 Unloading of cement, tar or bitumen drum lighter steel sections and other such materials from wagons and stacking the same on platform. 733 As in item No. 236 (a) above but for heavy articles like joist etc. machinery and unwieldly structures 734 Stacking of bricks on edge in row of two to a height of ten brick and in a length of 100 bricks after dressing levelling of the site as required where bricks are to be stacked. 735 Stacking of coal, surkhi, sand, lime, stone grit, stone/brick ballast & boulders etc. to the required sizes to stacks after necessary dressing of site where such materials are to be stacked. 736 237 (a) above but when the materials are either cement / steel. 737 Loading of cement, tar or bitumen drums, lighter sections of steel and other such materials into wagons. 738 As in item 238 (a) above but for heavy articles like joist, machinery and unwieldly structures. 739 Cartage of R.C.C. Hume pipe 30cm. to 46cm. dia and 1.8 meter to 2.5 metre in length (including collars for which nothing extra will be paid ) including loading and unloading. 1st Km. 740 2nd and 3rd k.m. 741 4th and 5th k.m. 742 6th to 10th k.m. 743 11th to 20 th k.m. 744 21st to 30 th k.m. 745 31st to 50 th k.m. 746 51st to onward k.m. 747 As in item No. 239 (c) above but for R.C.C. Hume pipe 50 to 95 cm. dia and 1.8 meter to 2.5 meter in length carriage to be done by truck or by thela. 1st Km. 748 2nd and 3rd k.m. 749 4th and 5th k.m. 750 6th to 10th k.m. 751 11th to 20 th k.m. 752 21st to 30 th k.m. 753 31st to 50 th k.m. 754 51st to onward k.m.
Contract Date: Jun 15, 2026 Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 10
Uttar Pradesh View Result →
21.
Railways #11285223 AOC
Supply Of Track Geometry Measurement Systemtrack Geometry Measurement System,Supply, Installation, Commissioning Of Laser Contactless Sensor-Based Track Geometry Meas Urement System (Tgms) As Per Rdso?S Technical Specification No. Tm/Im/341 (January 2015) In Railway?S Spic (As Per Rdso Drawing No. Spic-Ac-9-0-001) (Instead Of The Specific Coach Meant For Trcs To Rdso Dra Wing No. Lwtrc Drg No. Ty90005). [Details Of Stage Inspection At Para 7.Inspection, Testing And Acceptan Ce Of This Tender]. [ Warranty Period: 36 Months After The Date Of Delivery ] ] , Post-Warranty Comprehensive Annual Maintenance Contract (Camc) As Per Clause 3 Of Sr Sp Ecification /Special Condition For Tgms After 2 Years Of Warranty For 5 Years At Annual Discount Rate Of 10%. [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Discounting: 10 % ] ] At (Location) Ce/Mas, Sr Tamil Nadu 1.00 Numbers 3 6025Ns07 Optional Non Stock --- No Consignee Inr Spares (Y) Cost Of Set Of Spares With A List Of Spares And Break-Up Of Cost That Will Be Used During The Op Eration And Camc Period. Refer Clause 12 Of Rdso Specification. ] Consignee Ce/Mas, Sr Tamil Nadu 1.00 Set 4 6025Ser02 Essential Non Stock --- Yes Consignee Inr Services (Y) Operation And Maintenance Of Laser Contactless Sensor-Based Track Geometry Measuremen T System (Tgms) During Warranty Period As Per Clause 16 Of Sr Specification/Special Condition For Tgms. ] At (Location) Ce/Mas, Sr Tamil Nadu 1.00 Numbers 5 6025Ser03 Essential Non Stock --- Yes Consignee Inr Services (Y) Page 1 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 Preventive Maintenance And Break Down Maintenance During Warranty Period As Per Clause 11 Of Rdso Specification And As Per Clauses 7,8,12,13 Of Sr Specification /Special Condition For Tgms, I.E. F Or 2 Years From The Date Of Commissioning Of The Tgms. ] At (Location) Ce/Mas, Sr Tamil Nadu 1.00 Numbers 6 6529Ns06 Essential Non Stock --- Yes Rdso-Qa Inr Spares (Y) Set Of Tools Required For Maintenance Of The Machine. Firm To Upload The List Of Tools With Bre Ak-Up Cost. Refer Clause 13 Of Rdso Specification. ] Consignee Ce/Mas, Sr Tamil Nadu 1.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 1 Months Of Issue Of Contract, Delivery Of System Completion : Within 6 Months Thereafter Including Design Which Shall Be Submitted With In One (1) Month Of Award Of Loa And Manufacture And Lab Validation Tests Will Be Made Within Three Months By The Firm From The Date Of Approval. 2. The Installation Should Be Completed In One (01) Month, Field Validation Tests And Commissioning Of Tgms Shall Be Completed Within Two (2) Months By The Firm From The Date Of Receipt Of Systems At Ultimate Consignee In Southern Railway. Payment Terms S.No Description Payment Terms 1 1) 60% Payment: Upon Receipt Of The M&P Duly Pre-Inspected By Rdso, Receipted At The Site By The Consignee In Good Condition And Submission Of A Joint Receipt Note. 2) 20% Intermediate Payment: After Successful Installation And Commissioning And Submission Of A Joint Commissioning Note. 3) Final 20% Payment: After Commissioning Of The M&P At The Consignees End For A Minimum Period Of 30 Days, Upon Submission Of A 10% Warranty Bank Guarantee And A Proving Test Certificate Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassiï¬Cation By The Supplier/ Contractor. Standard Governing Conditions Page 2 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 S.No Description 1 The Bidder Agrees To Supply The Tendered Stores At The Rates Quoted By Him In Accordance With The Latest Version Of Irs Conditions Of Contract (Attached As Irs Conditions Of Contract To This Tender Document For Ready Reference) And Southern Railway Tender Conditions (Attached As Sr Tender Conditions To This Tender Document For Ready Reference). 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Supply Should Be As Per Rdso Normal Applicable To Yes Yes Not Allowed Speciï¬Cation Tm/Im/341 And Sr All Bidders Speciï¬Cation/Special Condition For Tgms Attached With This Tender. 2 The Bidder Shall Be Either Manufacturer Or Normal Applicable To Yes Yes Allowed Their Authorized Dealer And Should Have All Bidders (Optional) Supplied, Installed And Commissioned At Least One (01) Laser Contactless Sensor- Based Track Geometry Measurement System (Tgms) Having Following Sub Systems In Last 03 Years. Sub System Contact-Less Laser Sensor And Inertial Principle-Based Track Recording System Having Facility For Measurement Of Track Geometry Parameters Including Curvature & Gauge. The Supplied Track Geometry Measurement Systems (Tgms) Shall Have Capability For Measurement And Recording At Least Up To A Maximum Speed Of 110 Kmph. Or At Least One (01) Similar Integrated Track Monitoring System Should Have Been Supplied By The Firm In The Past And The Same Including The Sub System Shall Be Performing Satisfactorily On Indian Railways Network At Least For Last 02 Years. The Bidder Shall Submit The Performance Certiï¬Cate Issued By The Competent Authority Of The Railway Holding The Itms. 3 The Bidder Shall Submit Signed Copy Of Normal Applicable To Yes Yes Allowed Technical Compliance Statement -Clause- All Bidders (Optional) By-Clause Comments On Technical Speciï¬Cation, Either Conï¬Rming Acceptance Or Indicating Deviations There From. Deviation From The Specification With Reasons Should Be Clearly Indicated. 4 In Case Bidder Quoting As Authorized Normal Applicable To No Yes Allowed Dealer Of Manufacturer Shall Submit Valid All Bidders (Optional) Tender Speciï¬C Authorization Letter From Their Principle Speciï¬C To The Tender. The Bidder Will Submit Authorization Letter From Manufacturer Duly Signed Along With This Offer. 5 (I) The Bidders May Note That Their OffEr Normal Applicable To No No Not Allowed Shall Be Summarily Rejected In Case They All Bidders Fail To Comply Any Of The Above Mentioned Eligibility Criteria. (Ii) The Period For Eligibility Criteria Will Be Counted On The Date Of Opening Of Tender. Page 3 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 6 Preferably Manufacturers Should Normal Applicable To No No Allowed Participate. Firms Who Are Quoting As All Bidders (Optional) Authorised Dealer Of Manufacturer Must Submit Tender Speciï¬C Authorization Letter Issued By The Oem In Their Letter Head Along With Their OffEr, Failing Which Their OffEr Will Be Summarily Rejected. (Please Refer Para 3.4 Of Part B Of Sr Tender Conditions). 7 Firm To Upload Copies Of Purchase Orders, Normal Applicable To Yes Yes Allowed Inspection Certiï¬Cates,Joint Commission All Bidders (Optional) Certiï¬Cate (Completion Report) From Consignee As Proof Of Past Performance. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached Documents To Prove Normal Applicable To No No Not Allowed Your Eligibility And Past Performance As All Bidders Per Tender Requirement? 2 Have You Attached Certiï¬Cation Of Local Normal Applicable To No No Not Allowed Content From Statutory Auditor/ Cost All Bidders Accountant? 3 Have You Quoted Warranty Oblications As Normal Applicable To No No Not Allowed Per Tender Requirement? All Bidders 4 Have You Quoted Delivery Period Correctly Normal Applicable To No No Not Allowed And Precisely? All Bidders 5 Have You Submitted All Supporting Normal Applicable To No No Not Allowed Documents Required? All Bidders 6 Have You Read The Security Deposit (Sd) Normal Applicable To No No Not Allowed Condition At Para 10 Of Part A Of Sr All Bidders Tender Conditions Attached With This Tender Document And Uploaded Relevant Document For Seeking Exemption From Submission Of Sd? If Not, Are You Ready To Pay Security Deposit? 7 Are You Coming Under Mse Status Given Normal Applicable To No No Not Allowed As Per Guidelines Issued By Railway Board All Bidders Forpurchase Preference Vide Letter No. 2010-Rs [G] -363-1 Dt. 05.07.2012 Or Latest. If Yes,Have You Attached Valid Documents (Udyam Registration Certiï¬Cate) Towards Being Mse? 8 Have You Furnished The Statement Of Normal Applicable To No No Not Allowed Deviations?[Preferably Nil] All Bidders 9 Have You Quoted The Discount If Any In The Normal Applicable To No No Not Allowed Specified Column Only In Ireps? All Bidders 10 Have You Furnished Bank Account Details Normal Applicable To No No Not Allowed Such As Name Of The Bank And Address, All Bidders Account No., Micr, Ifsc Code And Type Of Account To Facilitate Eft Payment? 11 Please Check Our Website Before Normal Applicable To No No Not Allowed Submitting OffEr, Whether Any All Bidders Corrigendum To The Tender Has Been Issued Or Not. 12 Firm To Indicate Make-Model-Brand Normal Applicable To No No Not Allowed Offered, If Any. All Bidders 13 Have You Kept Your OffEr Valid For 120 Normal Applicable To No No Not Allowed Days? All Bidders Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 1 In Case Of Road Delivery, The Date Of Normal Applicable To Yes Yes Not Allowed Delivery At Destination [Consignees End] All Bidders Shall Only Be Treated As Delivery Date Irrespective Of F.O.R. / F.O.T. Condition Mentioned Elsewhere In The Contract / Tender. 2 Tenderers May Note That Their OffEred Normal Applicable To Yes Yes Not Allowed Delivery Schedule Should Clearly Indicate All Bidders The Starting Date And ϬNishing Date. For OffErs With Vague Delivery Schedule Like -02 To 12 Months- Or Like -06 To 10 Months-, Delivery Period Shall Be Given As Per The Requirement Best Suited To This Oï¬Ƒce Within The Quoted Range. 3 The Bidder Conï¬Rms That Rates And Other Normal Applicable To Yes Yes Not Allowed ϬNancial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Ruling Terms For Acceptance, And Such Terms Quoted Anywhere Else Should Be Ignored. 4 Whenever Tender Is Ϭ‚Oated With Purchase Normal Applicable To Yes Yes Not Allowed Restriction From Sources Approved By All Bidders Nominated Authorities And There Exists A Suspected Cartel Situation By Approved Sources Or The Rates Available From Approved Source/Sources Are Adjudged Unreasonably High, Despite Fair EffOrts As Permissible, The Purchaser Reserves The Right To Place Orders On ϬRm(S) Outside The Approved Vendor List, Without Any Restrictions.(Please Refer Para 4.0 Of Part B Of Sr Tender Conditions Document Attached To This Tender Document For Further Details.) Page 5 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 5 Hsn Code 8608 Normal Applicable To Yes Yes Not Allowed [A] All The Bidders/Tenderers Should Ensure All Bidders That They Are Gst Compliant And Their Quoted Tax Structure/Rates Are As Per The Gst Law. Firms Must Indicate Its Gst Registration Number Along With Their Offer. [B] In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Igst / Utgst/Sgst Act, The Railway Shall Deduct The Applicable Gst From His/Their Bills Under Reverse Charge Mechanism (Rcm) And Deposit The Same To The Concerned Tax Authority. [C] The ϬRm Should Indicate The Tariff Code (Hsn Code) For Claiming Gst For The Tendered Item. [D] The OffEr Shall Be Evaluated Based On The Gst Rate As Quoted By Each Bidder And Same Will Be Used For Determining The Inter-Se Ranking. While Submitting OffEr, It Shall Be The Responsibility Of The Bidder To Ensure That They Quote Correct Gst Rate And Hsn Number. [E] It Shall Be The Responsibility Of The Bidders To Quote Correct Hsn Number And Corresponding Gst Rate. The Purchaser Shall Not Be Responsible For Any Misclassiï¬Cation Of Hsn Number Or Incorrect Gst Rate, If Quoted By The Bidder. [F] Wherever, The Successful Bidder Invoices The Goods At Gst Rate Or Hsn Number Which Is DiffErent From That Incorporated In The Purchase Order, Payment Shall Be Made As Per Gst Rate Which Is Lower Of The Gst Rate Incorporated In The Purchase Order Or Billed. [G] Vendor Is Informed That She/He Would Be Required To Adjust Her/His Basic Price To The Extent Required By Higher Tax Bill As Per Invoice To Match The All Inclusive Price As Mentioned In The Purchase Order. [H] Any Amendment To Gst Rate Or Hsn Number In The Contract Shall Be As Per The Contractual Conditions And Statutory Amendments In The Quoted Gst Rate And Hsn Number, Under Svc. 6 Please Refer Para 15.0 Of Part - B Of Sr Normal Applicable To Yes Yes Not Allowed Tender Conditions Attached With This All Bidders Tender Document For Details Regarding Benefits Of Mse As Per Public Procurement Policy. 7 For Public Procurement (Preference To Normal Applicable To Yes Yes Not Allowed Make In India) Policy Is Applicble. Please All Bidders Refer Para 16.0 Of Part- B Of Sr Tender Conditions Attached To This Tender Document. Page 6 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 8 Bidder Shall Accept The Following Normal Applicable To Yes Yes Not Allowed Declaration [Land Border Condition] By All Bidders Quoting Yes Against Conf. Allowed Or Complied Column For Compliance Of Oï¬Ƒce Memorandum Of Department Of Expenditure, Ministry Of Finance Om No. F.No.6/18/2019-Ppd Dated 23.07.2020. If Such Certiï¬Cate Given By A Bidder Whose Bid Is Accepted Is Found To Be False, This Would Be A Ground For Immediate Termination And Further Legal Action In Accordance With Law. I/We Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India. I/We Certify That This Bidder Is Not From Such A Country Or , If From Such A Country, Has Been Registered With The Competent Authority. I/We Hereby Certify That This Bidder, Fulfills All Requirements In This Regard, And Is Eligible To Be Considered. (Where Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached.) 9 1) Bidders Are Instructed Not To Indulge In Normal Applicable To Yes Yes Not Allowed Any Anti-Competitive Practices. As Per The All Bidders Provisions Of Competition Act,2002, Railways Can Make A Reference To The Competition Commission Of India For Making An Enquiry In Case Of Suspected Anti-Competitive Behavior By The Bidders. 2) Collusive Bidding, Bid Rotation, Bid Suppression, Complementary Bidding, Market Allocation And Sub-Contracting Arrangements Fall Under The Purview Of Bid Rigging Which Would Cause Appreciable Adverse EffEct On Competition. 3) Competition Commission Of India Can Impose Heavy Penalties Such As: Penalty Upto 10% Of The Average Turnover For The Last Three Preceding ϬNancial Years Upon Each Of Such Enterprises Which Are Parties To Bid-Rigging And Can Even Order The Parties To Cease And Desist. 10 A) For : Destination. By Road. Normal Applicable To Yes Yes Not Allowed Accordingly, The ϬRms Are Advised To All Bidders Quote On For Destination Basis By Road And Offers With Deviations Are Liable To Be Ignored. B) Door Delivery Shall Be Made To The Consignees Along With Delivery Challan Postal Address Of The Consignees Is: Dy.Ce/Track/Hq/Mas,Chennai Central Yard, Bbq, Chennai, Tamil Nadu, India. Southern Railway Gst No. 33Aaagm0289c1zq. Page 7 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 11 Failure Consequences: In Case The ϬRm Normal Applicable To Yes Yes Not Allowed Fails To Execute The Contract Within The All Bidders Original Delivery Period, The Purchaser Will Be Entitled To Impose Liquidated Damages For Extension Of Delivery Period. For Any Reason, If The Supplier Fails To Supply Goods And/Or Service As Per The Conditions Of Contract, As Amended From Time To Time, Purchaser Shall Have The Right To Levy Damages From The Supplier For Failing To Comply With The Contractual Conditions, Not By The Way Of Penalty, An Amount Equal To Security Deposit Of The Defaulted Order Amount. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 12 Tenderers To Acknowledge Having Read Normal Applicable To Yes No Not Allowed And Also Accept The Irs Conditions Of All Bidders Contract, Sr Tender Conditions, Special And Other Conditions Speciï¬Ed In This Tender Document/Attached To This Tender Document. 13 Security Deposit (Sd):- Normal Applicable To Yes Yes Not Allowed (I) Security Deposit Shall Be 5 % Of Total All Bidders Value Of Contract And Shall Be Taken From All Vendors For Contract Value Above Rs. 25 Lakh Subject To The Applicable Exemptions. For Details Please Refer 10.0 Part A Of Sr Tender Conditions Enclosed To This Tender Document. In Case Of Submission Of Security Deposit In The Form Of Bank Guarantee, Please Refer Annexure 5 Of Part-B Of Southern Railway Tender Conditions (Ii) Security Deposit Will Be Released After Completion Of Warranty Period Of 24 Months And Proof Of Submission Of 10% Bg For Camc To Consignee Dy.Ce/Track/Hq/Mas. 14 (A) Free Delivery To Consignee. Supply Of Normal Applicable To Yes Yes Not Allowed Machine Shall Be Made As Per The All Bidders Delivery Schedule. (B) Bill Payment: After Successful Completion Of Purchase Order, ϬRm Has To Submit The Bill On-Line Through Ireps Portal Only For Payment. In This Regard, The Following Documents Have To Be Uploaded Based On The Crn (R-Note) Issued By Railway (A) Invoice, Gst Declaration( I.E. Self Declaration Regarding Aggregate Annual Turnover In A ϬNancial Year, Rnote, Neft Mandatory. (B) Warranty/Guarantee Certiï¬Cate, Rites Certiï¬Cate, Test Report, Dealership Certiï¬Cate (Or) Proof Of Purchase From Authorized Dealer, Calibration Certiï¬Cate, Commissioning Report Whichever Is Applicable. 15 Earnest Money Deposit (Emd) : Normal Applicable To Yes Yes Not Allowed 1)Emd Shall Be Deposited By All Vendors All Bidders For Tenders With Estimated Value Above Rs.25 Lakhs Subject To The Applicable Exemptions. For The Exemptions And Other Details Please Refer Para 2.0 Part A Of Southern Railway Tender Conditions. 2)In Case Of Submission Of Earnest Money Deposit In The Form Of Bank Guarantee, Please Refer Annexure- 6 Of Part - B Of Southern Railway Tender Conditions. Page 8 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 16 The Tenderers Shall Submit A Copy Of Normal Applicable To Yes Yes Allowed Certiï¬Cate Stating That All Their All Bidders (Optional) Statements/Documents Submitted Along With The Bid Are True And Factual. Standard Format Of Certiï¬Cate To Be Submitted By The Bidder Is Vailable Under Annexure-14 Of The Sr Tender Conditions Document Attached With This Tender. Non Submission Of The Above Certiï¬Cate By The Bidder Shall Result In Summary Rejection Of His/Their Bid. It Shall Be Mandatorily Incumbent Upon The Tenderer To Identify, State And Submit The Supporting Document Duly Self-Attested/ Digitally Signed By Which They/He Is Qualifying The Qualifying Criteria Mentioned In The Tender Document. It Will Not Be Obligatory On The Part Of Tender Committee / Accepting Authority To Scrutinize Beyond The Submitted Document Of The Tenderer As Far As His Qualiï¬Cation For The Tender Is Concerned. For Details Please Refer Para 21 Of Part B Of Sr Tender Conditions Document Attached With This Tender. 17 All The Tenderers Shall Have To Submit Normal Applicable To Yes Yes Allowed Clause-Wise Compliance Of Rdso All Bidders (Mandatory) Speciï¬Cation And Also Sr Speciï¬Cation/Special Condition For Tgms Mentioned In Bid Documents And Drawings Enclosed Along With This Tender, Spelling Out Deviations, If Any, To Ascertain Technical Suitability. An OffEr, Whose Technical Suitability Cannot Be Ascertained, May Be Liable To Be Ignored. 18 Inter - Se Position Of Offers Would Normal Applicable To Yes Yes Not Allowed Be Determined Based On The Sum Of All Bidders Cost Of The Equipment With All Accessories, Cost Of Tools, Cost Of Operation And Maintenance, Cost Of Preventive And Break Down Maintenance, And The Cost Towards Comprehensive Annual Maintenance Contract For 5 Years (With Npv Factor At Discount Of 10% Per Year) Following Free Comprehensive Warranty For 2 Years. (Excluding Cost Of Optional Spares). 19 Firm To Upload List Of Spares With Cost Normal Applicable To Yes Yes Allowed Breakup That Will Be Used During All Bidders (Optional) Operation And Camc Period. 20 Firm To Upload List Of Tools Required For Normal Applicable To Yes Yes Allowed Maintenance Of The Machine With Cost All Bidders (Optional) Breakup. 21 Please Enter The Percentage Of Local Normal Applicable To Yes Yes Allowed Content In The Material Being OffEred. All Bidders (Mandatory) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Page 9 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 22 (I) Firms Claiming To Be Class-I/Ii Local Normal Applicable To Yes Yes Allowed Supplier On The Basis Of Self Certiï¬Cation All Bidders (Mandatory) Of Local Content Are Required To Upload Along With Their OffEr A Self Certiï¬Cate Of Percentage Of Local Content In The Product OffEred. (Please Refer Para 16.0 Of Part B Of Sr Tender Conditions). (Ii) Please Enter The Percentage Of The Local Content In The Material Being Offered. Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Condition. 23 Bidders Must Quote On ϬRm Price Basis Normal Applicable To Yes Yes Not Allowed Only As Price Is Not Subject To Any All Bidders Variation. OffErs Quoted With Price Variation Clause (Pvc) Will Be Considered Unresponsive And Will Be Summarily Rejected. 24 Firm Should Provide Training For 4 Railway Normal Applicable To Yes Yes Not Allowed Oï¬Ƒcials For 4 Weeks At Their Premises. For All Bidders Details Refer Para 14.0 Of Rdso Speciï¬Cation And Para 6 Of Sr Specification/Special Condition For Tgms. 25 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Railway Is Not Bound To Accept The Lowest Normal Applicable To No No Not Allowed Or Any Tender Or To Assign Any Reason For All Bidders Doing So And Railway Reserves The Right To Accept/Cancel Any Tender In Respect Of The Whole Or Any Portion Of The Items Specified In The Schedule Annexed (Or Tender Schedule) And The Contractor Shall Be Required To Supply The Same At The Rate Quoted. 2 1. For Any Queries Against This Tender, Normal Applicable To No No Not Allowed Please Contact Dy. Cmm/Tr/Sr At All Bidders 9003060774. 2. Any Technical Clariï¬Cation Regarding Drawing/Speciï¬Cation Can Be Obtained From The Oï¬Ƒce Of The Cte/Sr/Mas. Dy. Ce/Tracks/Mas Mobile No. 9003060226. Drawing (S) / Speciï¬Cation (S) Can Also Be Obtained From The Above Oï¬Ƒce After Payment Requisite Cost, If Any. 3 Tenderers May Please Note That Giving Normal Applicable To No No Not Allowed Intimation Regarding The Tender In Open All Bidders Tender Cases Or Giving Limited Tender Enquiry Does Not Guarantee The Suitability Of OffEr For Placement Of Purchase Order. Railway Reserve The Right To Place Purchase Order Subject To Fulï¬Lment Of Technical/Commercial Eligibility Conditions/Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 10 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 1 Inspection Will Be By Rdso With 3 Stages Normal Applicable To No No Not Allowed Of Inspection As Follows: All Bidders Stage 1 : Pre-Dispatch Inspection At Oem Works By Staff From Concerned Directorate Of Rdso Stage 2 : Installation Veriï¬Cation By Staff Of Concerned Directorate Of Rdso/ Engineering Oï¬Ƒcials Nominated By Cte/Southern Railway Stage 3 : Commissioning & Performance Run By Engineering Oï¬Ƒcials Nominated By Cte/Southern Railway 2 Marking : Manufacturer To Mark His Normal Applicable To Yes Yes Not Allowed Name And Date Of Manufacture As Per All Bidders Drawing, Wherever Indicated, Or At A Location Where It May Not Get Obliterated In Service On The Item Being Supplied By Them Against The Purchase Order. Supplies Received Without This Are Liable To Be Rejected By Consignee. 3 I/We Agree To Supply The Tendered Stores Normal Applicable To Yes Yes Not Allowed At The Rates Quoted By Me/Us In All Bidders Accordance With The Irs Conditions Of Contract, Sr Tender Conditions, Special And Other Conditions Speciï¬Ed In This Tender Document/ Attached With This Tender Document. 4 Machine Should Have Warranty Of 24 Normal Applicable To Yes Yes Not Allowed Months From Date Of Successful All Bidders Commissioning Or 36 Months From The Date Of Supply Whichever Is Earlier. 5 No Developmental Order Will Be Placed For Normal Applicable To Yes Yes Not Allowed The Tendered Item. All Bidders 6 Post Warranty Camc Will Be Concluded By Normal Applicable To Yes Yes Not Allowed End-User Consignee At Their End After All Bidders Warranty Period, If Required. 7 In Case, ϬRm Is Submitting Security Normal Applicable To Yes Yes Not Allowed Deposit In The Form Bank Guarantee, It Is All Bidders To Be In Favour Of Fa&Cao/Ws/Per. Format For Bank Guarantee Is Available In Uploaded Document Conditions For Electronic Tenders . Contract Will Be Executed By President Of India Acting Through Principal Chief Materials Manager. Signature, Name And Address Of Two Witnesses Is Mandatory. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Not Allowed As Per Rdso Speciï¬Cation And Sr All Bidders Speciï¬Cation/Special Condition For Tgms Attached With This Tender. Tenderers Are Required To Submit Complete Details Including Values, Write-Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Any Contradiction, Between Rdso Speciï¬Cation And Sr Speciï¬Cstion/Special Condotion For Tgms, Clauses In Sr Speciï¬Cation/Special Condition For Tgms Will Supersede Rdso Specification. In Case Of Incomplete / Sketchy Information, The Technical OffEr Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. Page 11 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To The 3 Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The Offer 5 And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In The 8 Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After The 9 Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description 1 5535860.Pdf Rdso Specification Tm/Im/341 2 5532490.Pdf Sr Tender Conditions 3 5530801.Pdf Irs Conditions 4 5530787.Pdf Sr Specification/Special Condition For Tgms 7. Responsiveness S.No. Description 3.1 I/We Have Carefully Gone Through The Irs Conditions Of Contract (Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Sister Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control Etc.) Have Participated In This Tender Which Can Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The 1 OffErs Of All Such Sister Concerns Including Ours Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General, With Speciï¬C Reference To ConflIct Of Interest [Para 2502 (E)], Anti Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected, At Any Stage. 2 Validity Of Offer:-120 Days, No Deviation From The Offer Validity Period Stipulated In The Tender Is Permitted. Scope Of Supply (For Main Item): As Per Clause-2 Of Rdso Speciï¬Cation No.Tm/Im/341 Enclosed With This 3 Tender. Scope Of Supply (For Operation And Maintenance, Camc ) As Per Sr Speciï¬Cation/Special Condition For Tgms Enclosed With This Tender. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Page 12 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 Digitally Signed By Dy.Cmm/Traction ( A N Veeraraghavan ) , Cost Of Set Of Spares With A List Of Spares And Break-Up Of Cost That Will Be Used During The Op Eration And Camc Period. Refer Clause 12 Of Rdso Specification. ] , Operation And Maintenance Of Laser Contactless Sensor-Based Track Geometry Measuremen T System (Tgms) During Warranty Period As Per Clause 16 Of Sr Specification/Special Condition For Tgms. ] At (Location) Ce/Mas, Sr Tamil Nadu 1.00 Numbers 5 6025Ser03 Essential Non Stock --- Yes Consignee Inr Services (Y) Page 1 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly , Preventive Maintenance And Break Down Maintenance During Warranty Period As Per Clause 11 Of Rdso Specification And As Per Clauses 7,8,12,13 Of Sr Specification /Special Condition For Tgms, I.E. F Or 2 Years From The Date Of Commissioning Of The Tgms. ] At (Location) Ce/Mas, Sr Tamil Nadu 1.00 Numbers 6 6529Ns06 Essential Non Stock --- Yes Rdso-Qa Inr Spares (Y) Set Of Tools Required For Maintenance Of The Machine. Firm To Upload The List Of Tools With Bre Ak-Up Cost. Refer Clause 13 Of Rdso Specification. ] Consignee Ce/Mas, Sr Tamil Nadu 1.00 Set 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 1 Months Of Issue Of Contract, Delivery Of System Completion : Within 6 Months Thereafter Including Design Which Shall Be Submitted With In One (1) Month Of Award Of Loa And Manufacture And Lab Validation Tests Will Be Made Within Three Months By The Firm From The Date Of Approval. 2. The Installation Should Be Completed In One (01) Month, Field Validation Tests And Commissioning Of Tgms Shall Be Completed Within Two (2) Months By The Firm From The Date Of Receipt Of Systems At Ultimate Consignee In Southern Railway. Payment Terms S.No Description Payment Terms 1 1) 60% Payment: Upon Receipt Of The M&P Duly Pre-Inspected By Rdso, Receipted At The Site By The Consignee In Good Condition And Submission Of A Joint Receipt Note. 2) 20% Intermediate Payment: After Successful Installation And Commissioning And Submission Of A Joint Commissioning Note. 3) Final 20% Payment: After Commissioning Of The M&P At The Consignees End For A Minimum Period Of 30 Days, Upon Submission Of A 10% Warranty Bank Guarantee And A Proving Test Certificate Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassiï¬Cation By The Supplier/ Contractor. Standard Governing Conditions Page 2 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 S.No Description 1 The Bidder Agrees To Supply The Tendered Stores At The Rates Quoted By Him In Accordance With The Latest Version Of Irs Conditions Of Contract (Attached As Irs Conditions Of Contract To This Tender Document For Ready Reference) And Southern Railway Tender Conditions (Attached As Sr Tender Conditions To This Tender Document For Ready Reference). 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Supply Should Be As Per Rdso Normal Applicable To Yes Yes Not Allowed Speciï¬Cation Tm/Im/341 And Sr All Bidders Speciï¬Cation/Special Condition For Tgms Attached With This Tender. 2 The Bidder Shall Be Either Manufacturer Or Normal Applicable To Yes Yes Allowed Their Authorized Dealer And Should Have All Bidders (Optional) Supplied, Installed And Commissioned At Least One (01) Laser Contactless Sensor- Based Track Geometry Measurement System (Tgms) Having Following Sub Systems In Last 03 Years. Sub System Contact-Less Laser Sensor And Inertial Principle-Based Track Recording System Having Facility For Measurement Of Track Geometry Parameters Including Curvature & Gauge. The Supplied Track Geometry Measurement Systems (Tgms) Shall Have Capability For Measurement And Recording At Least Up To A Maximum Speed Of 110 Kmph. Or At Least One (01) Similar Integrated Track Monitoring System Should Have Been Supplied By The Firm In The Past And The Same Including The Sub System Shall Be Performing Satisfactorily On Indian Railways Network At Least For Last 02 Years. The Bidder Shall Submit The Performance Certiï¬Cate Issued By The Competent Authority Of The Railway Holding The Itms. 3 The Bidder Shall Submit Signed Copy Of Normal Applicable To Yes Yes Allowed Technical Compliance Statement -Clause- All Bidders (Optional) By-Clause Comments On Technical Speciï¬Cation, Either Conï¬Rming Acceptance Or Indicating Deviations There From. Deviation From The Specification With Reasons Should Be Clearly Indicated. 4 In Case Bidder Quoting As Authorized Normal Applicable To No Yes Allowed Dealer Of Manufacturer Shall Submit Valid All Bidders (Optional) Tender Speciï¬C Authorization Letter From Their Principle Speciï¬C To The Tender. The Bidder Will Submit Authorization Letter From Manufacturer Duly Signed Along With This Offer. 5 (I) The Bidders May Note That Their OffEr Normal Applicable To No No Not Allowed Shall Be Summarily Rejected In Case They All Bidders Fail To Comply Any Of The Above Mentioned Eligibility Criteria. (Ii) The Period For Eligibility Criteria Will Be Counted On The Date Of Opening Of Tender. Page 3 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 6 Preferably Manufacturers Should Normal Applicable To No No Allowed Participate. Firms Who Are Quoting As All Bidders (Optional) Authorised Dealer Of Manufacturer Must Submit Tender Speciï¬C Authorization Letter Issued By The Oem In Their Letter Head Along With Their OffEr, Failing Which Their OffEr Will Be Summarily Rejected. (Please Refer Para 3.4 Of Part B Of Sr Tender Conditions). 7 Firm To Upload Copies Of Purchase Orders, Normal Applicable To Yes Yes Allowed Inspection Certiï¬Cates,Joint Commission All Bidders (Optional) Certiï¬Cate (Completion Report) From Consignee As Proof Of Past Performance. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Attached Documents To Prove Normal Applicable To No No Not Allowed Your Eligibility And Past Performance As All Bidders Per Tender Requirement? 2 Have You Attached Certiï¬Cation Of Local Normal Applicable To No No Not Allowed Content From Statutory Auditor/ Cost All Bidders Accountant? 3 Have You Quoted Warranty Oblications As Normal Applicable To No No Not Allowed Per Tender Requirement? All Bidders 4 Have You Quoted Delivery Period Correctly Normal Applicable To No No Not Allowed And Precisely? All Bidders 5 Have You Submitted All Supporting Normal Applicable To No No Not Allowed Documents Required? All Bidders 6 Have You Read The Security Deposit (Sd) Normal Applicable To No No Not Allowed Condition At Para 10 Of Part A Of Sr All Bidders Tender Conditions Attached With This Tender Document And Uploaded Relevant Document For Seeking Exemption From Submission Of Sd? If Not, Are You Ready To Pay Security Deposit? 7 Are You Coming Under Mse Status Given Normal Applicable To No No Not Allowed As Per Guidelines Issued By Railway Board All Bidders Forpurchase Preference Vide Letter No. 2010-Rs [G] -363-1 Dt. 05.07.2012 Or Latest. If Yes,Have You Attached Valid Documents (Udyam Registration Certiï¬Cate) Towards Being Mse? 8 Have You Furnished The Statement Of Normal Applicable To No No Not Allowed Deviations?[Preferably Nil] All Bidders 9 Have You Quoted The Discount If Any In The Normal Applicable To No No Not Allowed Specified Column Only In Ireps? All Bidders 10 Have You Furnished Bank Account Details Normal Applicable To No No Not Allowed Such As Name Of The Bank And Address, All Bidders Account No., Micr, Ifsc Code And Type Of Account To Facilitate Eft Payment? 11 Please Check Our Website Before Normal Applicable To No No Not Allowed Submitting OffEr, Whether Any All Bidders Corrigendum To The Tender Has Been Issued Or Not. 12 Firm To Indicate Make-Model-Brand Normal Applicable To No No Not Allowed Offered, If Any. All Bidders 13 Have You Kept Your OffEr Valid For 120 Normal Applicable To No No Not Allowed Days? All Bidders Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 1 In Case Of Road Delivery, The Date Of Normal Applicable To Yes Yes Not Allowed Delivery At Destination [Consignees End] All Bidders Shall Only Be Treated As Delivery Date Irrespective Of F.O.R. / F.O.T. Condition Mentioned Elsewhere In The Contract / Tender. 2 Tenderers May Note That Their OffEred Normal Applicable To Yes Yes Not Allowed Delivery Schedule Should Clearly Indicate All Bidders The Starting Date And ϬNishing Date. For OffErs With Vague Delivery Schedule Like -02 To 12 Months- Or Like -06 To 10 Months-, Delivery Period Shall Be Given As Per The Requirement Best Suited To This Oï¬Ƒce Within The Quoted Range. 3 The Bidder Conï¬Rms That Rates And Other Normal Applicable To Yes Yes Not Allowed ϬNancial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Ruling Terms For Acceptance, And Such Terms Quoted Anywhere Else Should Be Ignored. 4 Whenever Tender Is Ϭ‚Oated With Purchase Normal Applicable To Yes Yes Not Allowed Restriction From Sources Approved By All Bidders Nominated Authorities And There Exists A Suspected Cartel Situation By Approved Sources Or The Rates Available From Approved Source/Sources Are Adjudged Unreasonably High, Despite Fair EffOrts As Permissible, The Purchaser Reserves The Right To Place Orders On ϬRm(S) Outside The Approved Vendor List, Without Any Restrictions.(Please Refer Para 4.0 Of Part B Of Sr Tender Conditions Document Attached To This Tender Document For Further Details.) Page 5 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 5 Hsn Code 8608 Normal Applicable To Yes Yes Not Allowed [A] All The Bidders/Tenderers Should Ensure All Bidders That They Are Gst Compliant And Their Quoted Tax Structure/Rates Are As Per The Gst Law. Firms Must Indicate Its Gst Registration Number Along With Their Offer. [B] In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Igst / Utgst/Sgst Act, The Railway Shall Deduct The Applicable Gst From His/Their Bills Under Reverse Charge Mechanism (Rcm) And Deposit The Same To The Concerned Tax Authority. [C] The ϬRm Should Indicate The Tariff Code (Hsn Code) For Claiming Gst For The Tendered Item. [D] The OffEr Shall Be Evaluated Based On The Gst Rate As Quoted By Each Bidder And Same Will Be Used For Determining The Inter-Se Ranking. While Submitting OffEr, It Shall Be The Responsibility Of The Bidder To Ensure That They Quote Correct Gst Rate And Hsn Number. [E] It Shall Be The Responsibility Of The Bidders To Quote Correct Hsn Number And Corresponding Gst Rate. The Purchaser Shall Not Be Responsible For Any Misclassiï¬Cation Of Hsn Number Or Incorrect Gst Rate, If Quoted By The Bidder. [F] Wherever, The Successful Bidder Invoices The Goods At Gst Rate Or Hsn Number Which Is DiffErent From That Incorporated In The Purchase Order, Payment Shall Be Made As Per Gst Rate Which Is Lower Of The Gst Rate Incorporated In The Purchase Order Or Billed. [G] Vendor Is Informed That She/He Would Be Required To Adjust Her/His Basic Price To The Extent Required By Higher Tax Bill As Per Invoice To Match The All Inclusive Price As Mentioned In The Purchase Order. [H] Any Amendment To Gst Rate Or Hsn Number In The Contract Shall Be As Per The Contractual Conditions And Statutory Amendments In The Quoted Gst Rate And Hsn Number, Under Svc. 6 Please Refer Para 15.0 Of Part - B Of Sr Normal Applicable To Yes Yes Not Allowed Tender Conditions Attached With This All Bidders Tender Document For Details Regarding Benefits Of Mse As Per Public Procurement Policy. 7 For Public Procurement (Preference To Normal Applicable To Yes Yes Not Allowed Make In India) Policy Is Applicble. Please All Bidders Refer Para 16.0 Of Part- B Of Sr Tender Conditions Attached To This Tender Document. Page 6 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 8 Bidder Shall Accept The Following Normal Applicable To Yes Yes Not Allowed Declaration [Land Border Condition] By All Bidders Quoting Yes Against Conf. Allowed Or Complied Column For Compliance Of Oï¬Ƒce Memorandum Of Department Of Expenditure, Ministry Of Finance Om No. F.No.6/18/2019-Ppd Dated 23.07.2020. If Such Certiï¬Cate Given By A Bidder Whose Bid Is Accepted Is Found To Be False, This Would Be A Ground For Immediate Termination And Further Legal Action In Accordance With Law. I/We Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India. I/We Certify That This Bidder Is Not From Such A Country Or , If From Such A Country, Has Been Registered With The Competent Authority. I/We Hereby Certify That This Bidder, Fulfills All Requirements In This Regard, And Is Eligible To Be Considered. (Where Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached.) 9 1) Bidders Are Instructed Not To Indulge In Normal Applicable To Yes Yes Not Allowed Any Anti-Competitive Practices. As Per The All Bidders Provisions Of Competition Act,2002, Railways Can Make A Reference To The Competition Commission Of India For Making An Enquiry In Case Of Suspected Anti-Competitive Behavior By The Bidders. 2) Collusive Bidding, Bid Rotation, Bid Suppression, Complementary Bidding, Market Allocation And Sub-Contracting Arrangements Fall Under The Purview Of Bid Rigging Which Would Cause Appreciable Adverse EffEct On Competition. 3) Competition Commission Of India Can Impose Heavy Penalties Such As: Penalty Upto 10% Of The Average Turnover For The Last Three Preceding ϬNancial Years Upon Each Of Such Enterprises Which Are Parties To Bid-Rigging And Can Even Order The Parties To Cease And Desist. 10 A) For : Destination. By Road. Normal Applicable To Yes Yes Not Allowed Accordingly, The ϬRms Are Advised To All Bidders Quote On For Destination Basis By Road And Offers With Deviations Are Liable To Be Ignored. B) Door Delivery Shall Be Made To The Consignees Along With Delivery Challan Postal Address Of The Consignees Is: Dy.Ce/Track/Hq/Mas,Chennai Central Yard, Bbq, Chennai, Tamil Nadu, India. Southern Railway Gst No. 33Aaagm0289c1zq. Page 7 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 11 Failure Consequences: In Case The ϬRm Normal Applicable To Yes Yes Not Allowed Fails To Execute The Contract Within The All Bidders Original Delivery Period, The Purchaser Will Be Entitled To Impose Liquidated Damages For Extension Of Delivery Period. For Any Reason, If The Supplier Fails To Supply Goods And/Or Service As Per The Conditions Of Contract, As Amended From Time To Time, Purchaser Shall Have The Right To Levy Damages From The Supplier For Failing To Comply With The Contractual Conditions, Not By The Way Of Penalty, An Amount Equal To Security Deposit Of The Defaulted Order Amount. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 12 Tenderers To Acknowledge Having Read Normal Applicable To Yes No Not Allowed And Also Accept The Irs Conditions Of All Bidders Contract, Sr Tender Conditions, Special And Other Conditions Speciï¬Ed In This Tender Document/Attached To This Tender Document. 13 Security Deposit (Sd):- Normal Applicable To Yes Yes Not Allowed (I) Security Deposit Shall Be 5 % Of Total All Bidders Value Of Contract And Shall Be Taken From All Vendors For Contract Value Above Rs. 25 Lakh Subject To The Applicable Exemptions. For Details Please Refer 10.0 Part A Of Sr Tender Conditions Enclosed To This Tender Document. In Case Of Submission Of Security Deposit In The Form Of Bank Guarantee, Please Refer Annexure 5 Of Part-B Of Southern Railway Tender Conditions (Ii) Security Deposit Will Be Released After Completion Of Warranty Period Of 24 Months And Proof Of Submission Of 10% Bg For Camc To Consignee Dy.Ce/Track/Hq/Mas. 14 (A) Free Delivery To Consignee. Supply Of Normal Applicable To Yes Yes Not Allowed Machine Shall Be Made As Per The All Bidders Delivery Schedule. (B) Bill Payment: After Successful Completion Of Purchase Order, ϬRm Has To Submit The Bill On-Line Through Ireps Portal Only For Payment. In This Regard, The Following Documents Have To Be Uploaded Based On The Crn (R-Note) Issued By Railway (A) Invoice, Gst Declaration( I.E. Self Declaration Regarding Aggregate Annual Turnover In A ϬNancial Year, Rnote, Neft Mandatory. (B) Warranty/Guarantee Certiï¬Cate, Rites Certiï¬Cate, Test Report, Dealership Certiï¬Cate (Or) Proof Of Purchase From Authorized Dealer, Calibration Certiï¬Cate, Commissioning Report Whichever Is Applicable. 15 Earnest Money Deposit (Emd) : Normal Applicable To Yes Yes Not Allowed 1)Emd Shall Be Deposited By All Vendors All Bidders For Tenders With Estimated Value Above Rs.25 Lakhs Subject To The Applicable Exemptions. For The Exemptions And Other Details Please Refer Para 2.0 Part A Of Southern Railway Tender Conditions. 2)In Case Of Submission Of Earnest Money Deposit In The Form Of Bank Guarantee, Please Refer Annexure- 6 Of Part - B Of Southern Railway Tender Conditions. Page 8 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 16 The Tenderers Shall Submit A Copy Of Normal Applicable To Yes Yes Allowed Certiï¬Cate Stating That All Their All Bidders (Optional) Statements/Documents Submitted Along With The Bid Are True And Factual. Standard Format Of Certiï¬Cate To Be Submitted By The Bidder Is Vailable Under Annexure-14 Of The Sr Tender Conditions Document Attached With This Tender. Non Submission Of The Above Certiï¬Cate By The Bidder Shall Result In Summary Rejection Of His/Their Bid. It Shall Be Mandatorily Incumbent Upon The Tenderer To Identify, State And Submit The Supporting Document Duly Self-Attested/ Digitally Signed By Which They/He Is Qualifying The Qualifying Criteria Mentioned In The Tender Document. It Will Not Be Obligatory On The Part Of Tender Committee / Accepting Authority To Scrutinize Beyond The Submitted Document Of The Tenderer As Far As His Qualiï¬Cation For The Tender Is Concerned. For Details Please Refer Para 21 Of Part B Of Sr Tender Conditions Document Attached With This Tender. 17 All The Tenderers Shall Have To Submit Normal Applicable To Yes Yes Allowed Clause-Wise Compliance Of Rdso All Bidders (Mandatory) Speciï¬Cation And Also Sr Speciï¬Cation/Special Condition For Tgms Mentioned In Bid Documents And Drawings Enclosed Along With This Tender, Spelling Out Deviations, If Any, To Ascertain Technical Suitability. An OffEr, Whose Technical Suitability Cannot Be Ascertained, May Be Liable To Be Ignored. 18 Inter - Se Position Of Offers Would Normal Applicable To Yes Yes Not Allowed Be Determined Based On The Sum Of All Bidders Cost Of The Equipment With All Accessories, Cost Of Tools, Cost Of Operation And Maintenance, Cost Of Preventive And Break Down Maintenance, And The Cost Towards Comprehensive Annual Maintenance Contract For 5 Years (With Npv Factor At Discount Of 10% Per Year) Following Free Comprehensive Warranty For 2 Years. (Excluding Cost Of Optional Spares). 19 Firm To Upload List Of Spares With Cost Normal Applicable To Yes Yes Allowed Breakup That Will Be Used During All Bidders (Optional) Operation And Camc Period. 20 Firm To Upload List Of Tools Required For Normal Applicable To Yes Yes Allowed Maintenance Of The Machine With Cost All Bidders (Optional) Breakup. 21 Please Enter The Percentage Of Local Normal Applicable To Yes Yes Allowed Content In The Material Being OffEred. All Bidders (Mandatory) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Page 9 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 22 (I) Firms Claiming To Be Class-I/Ii Local Normal Applicable To Yes Yes Allowed Supplier On The Basis Of Self Certiï¬Cation All Bidders (Mandatory) Of Local Content Are Required To Upload Along With Their OffEr A Self Certiï¬Cate Of Percentage Of Local Content In The Product OffEred. (Please Refer Para 16.0 Of Part B Of Sr Tender Conditions). (Ii) Please Enter The Percentage Of The Local Content In The Material Being Offered. Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Condition. 23 Bidders Must Quote On ϬRm Price Basis Normal Applicable To Yes Yes Not Allowed Only As Price Is Not Subject To Any All Bidders Variation. OffErs Quoted With Price Variation Clause (Pvc) Will Be Considered Unresponsive And Will Be Summarily Rejected. 24 Firm Should Provide Training For 4 Railway Normal Applicable To Yes Yes Not Allowed Oï¬Ƒcials For 4 Weeks At Their Premises. For All Bidders Details Refer Para 14.0 Of Rdso Speciï¬Cation And Para 6 Of Sr Specification/Special Condition For Tgms. 25 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Railway Is Not Bound To Accept The Lowest Normal Applicable To No No Not Allowed Or Any Tender Or To Assign Any Reason For All Bidders Doing So And Railway Reserves The Right To Accept/Cancel Any Tender In Respect Of The Whole Or Any Portion Of The Items Specified In The Schedule Annexed (Or Tender Schedule) And The Contractor Shall Be Required To Supply The Same At The Rate Quoted. 2 1. For Any Queries Against This Tender, Normal Applicable To No No Not Allowed Please Contact Dy. Cmm/Tr/Sr At All Bidders 9003060774. 2. Any Technical Clariï¬Cation Regarding Drawing/Speciï¬Cation Can Be Obtained From The Oï¬Ƒce Of The Cte/Sr/Mas. Dy. Ce/Tracks/Mas Mobile No. 9003060226. Drawing (S) / Speciï¬Cation (S) Can Also Be Obtained From The Above Oï¬Ƒce After Payment Requisite Cost, If Any. 3 Tenderers May Please Note That Giving Normal Applicable To No No Not Allowed Intimation Regarding The Tender In Open All Bidders Tender Cases Or Giving Limited Tender Enquiry Does Not Guarantee The Suitability Of OffEr For Placement Of Purchase Order. Railway Reserve The Right To Place Purchase Order Subject To Fulï¬Lment Of Technical/Commercial Eligibility Conditions/Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 10 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 1 Inspection Will Be By Rdso With 3 Stages Normal Applicable To No No Not Allowed Of Inspection As Follows: All Bidders Stage 1 : Pre-Dispatch Inspection At Oem Works By Staff From Concerned Directorate Of Rdso Stage 2 : Installation Veriï¬Cation By Staff Of Concerned Directorate Of Rdso/ Engineering Oï¬Ƒcials Nominated By Cte/Southern Railway Stage 3 : Commissioning & Performance Run By Engineering Oï¬Ƒcials Nominated By Cte/Southern Railway 2 Marking : Manufacturer To Mark His Normal Applicable To Yes Yes Not Allowed Name And Date Of Manufacture As Per All Bidders Drawing, Wherever Indicated, Or At A Location Where It May Not Get Obliterated In Service On The Item Being Supplied By Them Against The Purchase Order. Supplies Received Without This Are Liable To Be Rejected By Consignee. 3 I/We Agree To Supply The Tendered Stores Normal Applicable To Yes Yes Not Allowed At The Rates Quoted By Me/Us In All Bidders Accordance With The Irs Conditions Of Contract, Sr Tender Conditions, Special And Other Conditions Speciï¬Ed In This Tender Document/ Attached With This Tender Document. 4 Machine Should Have Warranty Of 24 Normal Applicable To Yes Yes Not Allowed Months From Date Of Successful All Bidders Commissioning Or 36 Months From The Date Of Supply Whichever Is Earlier. 5 No Developmental Order Will Be Placed For Normal Applicable To Yes Yes Not Allowed The Tendered Item. All Bidders 6 Post Warranty Camc Will Be Concluded By Normal Applicable To Yes Yes Not Allowed End-User Consignee At Their End After All Bidders Warranty Period, If Required. 7 In Case, ϬRm Is Submitting Security Normal Applicable To Yes Yes Not Allowed Deposit In The Form Bank Guarantee, It Is All Bidders To Be In Favour Of Fa&Cao/Ws/Per. Format For Bank Guarantee Is Available In Uploaded Document Conditions For Electronic Tenders . Contract Will Be Executed By President Of India Acting Through Principal Chief Materials Manager. Signature, Name And Address Of Two Witnesses Is Mandatory. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Not Allowed As Per Rdso Speciï¬Cation And Sr All Bidders Speciï¬Cation/Special Condition For Tgms Attached With This Tender. Tenderers Are Required To Submit Complete Details Including Values, Write-Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Any Contradiction, Between Rdso Speciï¬Cation And Sr Speciï¬Cstion/Special Condotion For Tgms, Clauses In Sr Speciï¬Cation/Special Condition For Tgms Will Supersede Rdso Specification. In Case Of Incomplete / Sketchy Information, The Technical OffEr Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. Page 11 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To The 3 Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The Offer 5 And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In The 8 Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After The 9 Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description 1 5535860.Pdf Rdso Specification Tm/Im/341 2 5532490.Pdf Sr Tender Conditions 3 5530801.Pdf Irs Conditions 4 5530787.Pdf Sr Specification/Special Condition For Tgms 7. Responsiveness S.No. Description 3.1 I/We Have Carefully Gone Through The Irs Conditions Of Contract (Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Sister Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control Etc.) Have Participated In This Tender Which Can Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The 1 OffErs Of All Such Sister Concerns Including Ours Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General, With Speciï¬C Reference To ConflIct Of Interest [Para 2502 (E)], Anti Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected, At Any Stage. 2 Validity Of Offer:-120 Days, No Deviation From The Offer Validity Period Stipulated In The Tender Is Permitted. Scope Of Supply (For Main Item): As Per Clause-2 Of Rdso Speciï¬Cation No.Tm/Im/341 Enclosed With This 3 Tender. Scope Of Supply (For Operation And Maintenance, Camc ) As Per Sr Speciï¬Cation/Special Condition For Tgms Enclosed With This Tender. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Page 12 Of 13 Run Date/Time: 16/09/2025 16:12:37Stores/Southern Rly Tender Document Tender No 16255013 Closing Date/Time 13/10/2025 14:30 Digitally Signed By Dy.Cmm/Traction ( A N Veeraraghavan ) , Set Of Tools Required For Maintenance Of The Machine. Firm To Upload The List Of Tools With Bre Ak-Up Cost. Refer Clause 13 Of Rdso Specification. ]
Contract Date: Jun 15, 2026 Contract Value : ₹ 7.62 Crore
Government Departments No of Bidders 1
Tamil Nadu View Result →
22.
Educational and Research Institute #11273270 Technical Bid
Tender For Civil Work At Mgsss, Ratanpura Block Rajgarh- 1 Part A Civil Work 2 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sum On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 3 P.C.C. In Foundation Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Complete In Spcified Grade Excluding The Cost Of Centering And Shuttering All Work Upto Plinth Level 1:4:8(1 Cement:4 Coarse Sand :8 Gradeed Stone Aggregate 40 Mm Nominal Size). 4 Brick Masonry With F.P.S. Bricks Of Class Designation 75 In Foundation And Plinth With Bricks Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) 5 Dpc:-Providing And Laying In Position Specified Grade Of Cement Concrete For All Rcc Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers (If Required Excluding The Cost Of Centering, Shuttering And Reinforcement . M20 Grade Nominal Mix/Design Mix. 6 Supply & Stacking Good Soil Of Earth At Site Complete Including Loading Unloading & Transportation Etc. Good Soil Of Earth 7 Brick Work In Super Structure Upto Five Storey With Selected Bricks Of Class Designation 75 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10Mm. Wide 12Mm. Deep Complete In Cement Mortar 1:6. Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) Add Extra Over Item Of Brick Work With Class Designation 100 In Substitution Of Class Designation 75 : 8 Pillar Masonary :-Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In All Shapes And Sizes In : Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) Add Extra For Square Or Rectangular Pillars In Superstructre Brick Work Up To Five Storey Upto 45 Cm Length And All Sides Are Free 9 Stone Kharanja: Rr Dry Stone Kharanja Under Floor 10 Lintel Beams:-Providing And Laying In Position Specified Grade Of Cement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( As Required) Excluding The Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc. M20 Grade Nominal Mix / Design Mix 11 Slab & Beam:-Providing And Laying In Position Specified Grade Of Cement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( As Required) Excluding The Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc. M20 Grade Nominal Mix / Design Mix 12 Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Props And Removal Of Formwork For Upto Floor Five Level For :Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping Bed Plates, Anchor Blocks, Sills, Chhajjas, Lintel, Beam, Plinth Beam Etc. 13 Steel Reinforcement:-P/F Reinforcement For Rcc Work Including Straightening,Cutting, Bending, Placing In Position And Binding (Including Cost Of Binding Wire) All Complete Upto Floor Five Leve Tmt Bars (Conforming Of Relevent Is Code). 14 Door Frames:- Structural Steel Work In Single Section Fixed With Or Without Connecting Plate Including Cutting, Hoisting ( Height Upto 10 M), Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Angle Iron (40X40X5Mm. @ 3 Kg/M) 15 Doors:-Providing And Fixing M.S. Sheet 1 Mm Thick Double Leaf Door Shutter In Angle Iron Frame 35X35X5Mm Suitabilly Diagonally Braced With 25X3Mm Flat Iron Above And Below Lock Rail Of Size 50X5Mm Beading Extra Including All Fittings, As Per Direction Of Engg. Incharge But Excluding Cost Of Chowkhats: Including Two Coats Of Anit-Corrosive Red Oxide Primer Paint. Add Extra For Double Leaf Shutters 16 Glazed Window:Providing And Fixing Steel Glazed Doors Windows And Ventilator Shutters Of Standard Rolled Steel Section Joints Mitred And Welded With Steel Lugs 13X3Mm, 10Cm. Long Embedded In Cement Concrete Block 15X10X10Cm. Of 1:3:6 (1Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws With Fixing Clips Or With Bolts And Nuts As Required Including Providing And Fixing Of Plain Glass Panes 4Mm Thick With Cooper Glazing Clips And Special Metal Sash Putty Of Approved Make Or Metal Beading With Screws Complete Including Priming Coat Of Approval Steel Primer, Excluding The Cost Of Metal Beading And Other Fitting Except Necessary Hinges Of Pivots Steel Handles Peg Stay Etc. As Required :Partly Fixed And Partly Openable [ Fixed Area Not To Exceed 33%] 17 Wire Gauge Supplying & Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3Mm With Suitable Screw At Not Exceeding 150 Mm Distance. 18 Guard Bars: P&F Square Bars Or Other Flat Welded To Window/Ventilators Etc. 19 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) For Area Of Each Slab From 2001 To 5000 Sq.Cm 20 Kota Stone Slabs 25 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete For Area Of Each Slab From 2001 To 5000 Sqcm 21 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finish : 12Mm Thick. 22 External Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished : 20 Mm Thick 23 Plaster(Ceiling): 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 (1 Cement: 3 Fine Sand) 24 Black Board : Plaster On New Surface On Wall In Cement Sand Mortar 1:3 Including Raking Of Joints Etc. Complete Fine Finish: 12 Mm Thick 25 Grading Roof For Water Proofing Treatment With Water Proffing Compound: Cement Concrete 1: 2: 4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate 20 Mm Nominal Size) 26 Gola:- Providing Gola 75Mm X 75Mm In Cement Concrete 1:2:4(1 Cement: 2 Coarse Sand: 4 Stone Aggregate 10 Mm And Down Gauge) Including Finished With Cement Mortar 1:3(1 Cement: 2 Fine Sand) As Per Standard Design. 27 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: New Work (Two Or More Coats) Over And Including Scrapping And Priming Coat With Cement Primer. 28 Inernal Finishing: Distempering With Dry Distemper Of Approved Brand Shade ( Two Or More Coats ) Of Required Shade New Work , Over And Including Priming Coat Of Whiting To Give An Even Shade Including All Scaffolding. 29 Exterior Finishing: Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade Including All Scaffolding. New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20 Kg/ 10 Sqm ). 30 Painting On Doors, Windows & Ramp Raling :- Painting With Syntheitic Enamel Paint Of Approved Brand And Manufacture In All Shade To Give An Even Shade New Steel Work (2 Or More Coat On New Work). 31 Copping: Cement Concrete Flooring 1:2:4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate) Finishing With A Floating Coat Of Neat Cement Including Cement Slurry, Making Of Lines Or Groove Etc. Complete But Excluding The Cost Of Nosing Of Steps Etc. Complete : 40 Mm Thick With 20 Mm Thick Nominal Size Aggregate. 32 For Rain Water-P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia 33 For Rain Water-P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Bend 87.5 110Mm Dia 34 Pipe Clip 110 Mm Dia 35 Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300Mm Confirming To Code Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4). 36 Part B Electrical Work 37 Wiring Of Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Virgin Material Pvc Conduit & ItS Isi Marked (Is:3419-1988) Accessories, Round Tiles, 1.2 Mm Thick Hot Dipped Galvanized Modular Box With Earth Terminal, 10A Modular Switch,Modular Face Plate With Grid Plate, 3 Pin Ceiling Rose / Holder /3 Way Connector, Screws, Making Connections, Testing Etc. As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 38 Short Point (Up To 3 Mtr.) 39 Medium Point (Up To 6 Mtr) 40 Long Point (Up To 10 Mtr) 41 Fan Point 42 Short Point (Up To 3 Mtr.) 43 Medium Point (Up To 6 Mtr) 44 Long Point (Up To 10 Mtr) 45 Wiring Of 3/5 Pin 6 Amp. Light Plug Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade(Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Pvc Conduit & ItS Isi Marked (Is:3419-1988)Accessories, Hot Dipped Galvanized Modular Box Of 1.2 Mm Thick With Earth Terminal, 10 A Modular Switch, 3/5 Pin 6 A Modular Socket, Modular Face Plate With Grid Plate, Screws, Making Connections, Testing Etc. As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsron Board 46 S&F Following Sizes (Dia.) Of Isi Marked ( Is:9537 P - Ii ) Rigid Steel Conduit With Wall Thickness According To Is Specified Along With Isi Marked (Is:14768 P-Ii 2003) Accessories In Recessed Using Saddles, Clamps, Fasteners, Pvc Bushes, Check Nuts, As Required Including Cutting Jhiris In The Wall And Making Good The Same As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 25 Mm 47 Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Class 5 Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, In Existing Surface Or Recessed Pvc/ Ms Conduit/Casing Capping Making Connections With Copper Lugs Of Suitable Size, Ferrules,Testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 48 1 X 1.5 Sq. Mm 49 2 X 1.5 Sq. Mm 50 2 X 2.5 Sq. Mm 51 Providing & Fixing Of 240/415 V Ac Mcb With Positive Isolation Of 10 Ka Breaking Capacity (B/ C/D Tripping Characteristic As Per Type Of Load And Site Requirement) 4 Kv Impulse Withstand Voltage, Isi Marked Is 8828(1996) / Conforming To Iec 60898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Of Class 3 As Per Iec, Minimum Phase Termination Capacity Of 35Sq.Mm. , Conductor Line Load Reversibility , Ip 20 Contact Protection And Fitted In Existing Distribution Board/Sheets, Minimum Electrical Operation 20,000 Upto 20 A Rating And 10,000 Upto 63 A, 5000 For 80 A & Above Rating Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 6 A To 32 A Rating 52 Providing & Fixing Of Recessed/Surface Mounting Heavy Duty Horizontal Type Double Door ( Metal / Glazed )Distribution Board With Metal End Box Made Out From Galvanized Steel / Crca Sheet Not Less Then 1.2 Mm Thick Conforming To Is-8623-1 & 3 / Iec 61439- 1 & 3, Powder Painted Complete With Reversible Door (For Double Door Db Only )100 Amp. Insulated Copper Bus Bar/Shorting Link , Copper Neutral Link, Copper Earth Link , Color Coded Interconnecting Wire Set Of Suitable Rating And Din Bar,Masking Sheet, Making Internal Db Terminations With Copper Lugs, Ferrules, Detachable Gland Plate, Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Metal Door (Single Phase) Ik-09 And Ip-43 With Metal End Box 8 Way (8+2) 53 Providing & Fixing Of Ip-20 Led Recessed / Surface Mounted, Round / Sqaure Smd Mid Power Led Downlight With Power Coated Die-Cast Aluminum Housing With Uv Stabilized Non Yellowish Diffuser With Bis Complience 2.5 Kv Surge Protected Isolated Driver, With Short & Open Circuit Protection, Having Efficiency > 85% . System Lumen Efficacy Of ≥ 110 Lm / Watt, Thd 80, Life Time Of Minimum 50000 Burning Hours With , 70% Of Intial Lumen Maintaned Till Life Ends , Cct 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As Per Ansi Bin) , Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79 & Lm80) Certificate / Report From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . Minimum Lumen Output 1300 Lm 54 Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Un-Armoured Copper Cable Confirming To Is:1554 P-I / Is :7098 P - I Of 1.1 Kv With Electrolytic Grade Copper Made Of Copper Rods Confirming To Is 613-1964, Of Purity >99.7 %, Inner / Outer Sheath Confirming To Is:5831 In Existing Rcc / Hume / Stoneware / Pvc Pipe/ Open Duct/Cable Trench / Cable Tray (With Cable Tie) Including Testing Etc. As Required Of Following Size. Oem Must Have ItS Own In House Nabl Accrediated Laboratory For Testing Procedure As Per Is:10810 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 6.0 Sq. Mm 4 Core 55 Providing & Fixing Of Bee Star Rated Copper Wounded Double Ball Bearing Capacitor Start, Aluminium Body & Metallic Blade Ceiling Fan Conforming To All The Performance Requirements Laid Down In Is 374:2019 Including All Amendments, As Applicable ; & Carry Bis Licensing (I.E. Isi Marking) With Down Rod Up To 80 Cm With Secondary Support Safety Cable ( Steel Rope) , Cotter Pin With 3 X 1.5 Sq.Mm Pvc Insulated Flexible Copper Conductor Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 1200 Mm Sweep Bee 3 Star Rated (Service Value >=5.0 To 56 Providing & Fixing Of Isi Marked (Is:371) 6 Amp Surface Type 3 Pin Ceiling Rose With Cm/L No. Printed And Made Out From Industrial Grade Polycarbonate Or Fire Resistant Abs Material, Brass Terminal & Captive Screws Including Making Connection Testing Etc. As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 57 Providing & Fixing Of Isi Marked (Is:1258) Batten/Angle Lamp Holder With Cm/L No. Printed And Made Out From Industrial Grade Polycarbonate Or Fire Resistant Abs Material, Brass Terminal & Captive Screwsincluding Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 58 P & F 1.2Mm Thick M.S. Recessed Fan Box, Hexagonal/ Round Of Size 130 Mm Dia, Depth 75Mm, 12 Mm Dia Rod Fan Hook With 100 Mm Length Extended On Each Side . All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 59 P & F 1.2 Mm Thick G. I. / M .S. Sheet Boxes Duly Finished With Two Coats Of Red Oxide And With Earthing Terminal Of Following Sizes (Nominal Size) In Recessed/Surface As Required.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 175Mm X 100Mm X 60Mm 60 P & F Paper Phenolic Resin Bonded Laminates Confirming To Is : 2036 - 1995 For Boxes/ Frames Including Making Holes For Switches Etc, With Brass Screws, Washers/ Zinc Plated Nut And Bolts As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 3.0 Mm Thick
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Rajasthan View Result →
23.
Educational and Research Institute #11269588 Technical Bid
Tender For Civil Work At Mgsss, Sahawa Block Taranagar- 1 Part A Civil Work 2 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sum On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 3 P.C.C. In Foundation Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Complete In Spcified Grade Excluding The Cost Of Centering And Shuttering All Work Upto Plinth Level 1:4:8(1 Cement:4 Coarse Sand :8 Gradeed Stone Aggregate 40 Mm Nominal Size). 4 Brick Masonry With F.P.S. Bricks Of Class Designation 75 In Foundation And Plinth With Bricks Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) 5 Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways And Removal Of Formwork For Foundation, Footings, Strap Beam, Raft, Bases Of Columns Etc. 6 Providing And Laying In Position Specified Grade Of Cement Concrete For All Rcc Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement M20 Grade Nominal Mix / Design Mix 7 Brick Work With Clay Flyash F.P.S. Brick (Is 13757- 1993 ) Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor Five Level In : Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) 8 Half Brick Work With Mechanised Autoclaved Flyash Lime Bricks Conforming To Is: 12894 :2002 Of Class Designation 100 In Superstructure Above Plinth Level Upto Floor V Level In. C.M.1:4 9 Supplying And Fixing Stone Lintels/Bed Plates Of Approvedquarry Rough Dressed In Cement Mortar 1:4 Upto 15 Cm. Thick: 10 Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Props And Removal Of Formwork For Upto Floor Five Level For :Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping Bed Plates, Anchor Blocks, Sills, Chhajjas, Lintel, Beam, Plinth Beam Etc 11 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding (Including Cost Of Binding Wire) All Complete Up To Floor Five Level. 12 Providing And Laying In Position Specified Grade Of Cement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc.M20 Grade Nominal Mix / Design Mix 13 Stone Kharanja: Random Rubble Dry Stone Kharanja Under Floor 14 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M10 Grade Nominal Mix1: 3: 6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). 15 Providing & Fixing Ist Quality Standard White, Gray, Ivory,Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 And Is: 15622 Of Size 300Mm X 200Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of Tile Complete (Excluding The Cost Of Cement Plaster On Walls And Piller) 16 Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300Mm Confirming To Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4). 17 Door Frames : P & F T- Iron Frames For Doors , Windows And Ventilators Of Mild Steel , Tee Section Joints Mitred And Welded With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Blocks 15X10X10 Cm Of 1:3:6 (1 Cement:3 Fine Sand6 Graded Stone Aggregate 20 Mm Nominal Size:) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required Including Fixing Of Necessary Butt Hinged And Screws And Applying A Priming Coat Of Approved Steel Primer 18 Providing And Fixing M.S. Sheet 1Mm Thick Single Leaf Door Shutter Windows In Angle Iron Frame 35X35X5 Mm Suitabilly Diagonally Braced With 25X3Mm Flat Iron Above And Below Lock Rail Of Size 50X5Mm Beading Extra Including All Fittings, As Per Direction Of Engg. Incharge But Excluding Cost Of Chowkhats: Including Two Coats Of Anit-Corrosive Red Oxide Primer Paint 19 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 (1Cement : 3 - Fine Sand) 20 Internal Plaster :Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished : 12Mm Thick 21 External Plaster : Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished 20 Mm Thick 22 Grading Roof For Water Proofing Treatment Cement Concrete 1: 2: 4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate 20 Mm Nominal Size) 23 Providing And Fixing Steel Glazed Doors Windows Andventilator Shutters Of Standard Rolled Steel Section (Is 1038-1983) Joints Mitred And Welded With Steel Lugs 13X3Mm, 10Cm.Long Embedded In Cement Concrete Block 15X10X10Cm. Of1:3:6 (1Cement : 3 Coarse Sand : 6 Graded Stone Aggregate20Mm Nominal Size) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws With Fixing Clips Or With Bolts And Nuts Asrequired Including Providing And Fixing Of Plain Glass Panes 4Mm Thick With Cooper Glazing Clips And Special Metal Sashputty Of Approved Make Or Metal Beading With Screwscomplete Including Priming Coat Of Approval Steel Primer,Excluding The Cost Of Metal Beading And Other Fitting Exceptnecessary Hinges Of Pivots Steel Handles Peg Stay Etc. Asrequired Partly Fixed And Partly Openable [ Fixed Area Not To Exceed33%] 24 Supplying And Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gaugeto The Metal Frame Of Rolled Section By Metal Beading 20X3Mmwith Suitable Screw At Not Exceeding 150Mm Distance 25 Providing And Fixing Square Bars Or Other Flat Welded To Window, Ventilatiors Etc.12Mm Dia 26 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete 27 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding:New Work (Two Or More Coats) Over And Including Scrapping And Priming Coat With Cement Primer 28 Finishing Walls With Acrylic Smooth Exterior Paint Of Requiredshade Including All Scaffolding.New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Overand Including Base Coat Of Water Proofing Cement Paint Applied@ 2.20 Kg/ 10 Sqm ). 29 Panting On Doors & Windows :- Painting With Syntheitic Enamel Paint Of Approved Brand And Manufacture In All Shade To Give An Even Shade New Steel Work (2 Or More Coat On New Work). 30 Copping: Cement Concrete Flooring 1:2:4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate) Finishing With A Floating Coat Of Neat Cement Including Cement Slurry, Making Of Lines Or Groove Etc. Complete But Excluding The Cost Of Nosing Of Steps Etc. Complete : 40Mm Thick With 20Mm Thick Nominal Size Aggregate. 31 Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles Including Rubbing And Cleaning Etc. Complete On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Light Shade Using Shade Cement.P 32 Part B Sanetary Work 33 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Concealed Work Including Cutting Chases And Making Good The Walls Etc.,)20Mm Nominal Outer Dia Pipes 34 25 Mm Nominal Outer Dia Pipes 35 P & F Indian Type White Glazed Vitreous China 1St Quality W.C. Orissa Pan (Is :2556 Mark) With 100 Mm Vitreous China P Or S Trap Including Cutting And Making Good The Wall And Floor: Size 530*410Mm 36 Providing & Fixing Premium Qulaity Wvc Urinal With Pvc Waste Pipe, Dome Couplings, Concealed Iron Brackets Or Screws Etc. Complete Mini Stall Size 455*385*350 Mm. 37 P & F W.V.C. (Is: 2556 Mark) Squatting Urinal Of Standard Make Complete. Including Cutting & Making Good The Floor:. Size 450X350Mm 38 P & F Wvc Wash Basin (1St Quality, I.S. : 2556 Mark) Of Approved Make With C.I. Brackets Duly Painted, 1 No. 15 Mm C.P. Pillar Cock (Is : 8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make,25 Mm G.I. Waste Pipe Complete Including Cutting & Making Good The Wall.: 450 X 300 Mm 39 P & F Bib Cock (Is : 8931 Mark) Superior Quality Of Approved Make.C.P. Brass 400 Gm, 15 Mm Nominal Bore. 40 P & F Inlet Connection (Angle Valves) Superior Quality Of Approved Make C.P. Intel Connection 15 Mm Brass (Is : 8931) 41 P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia 42 P & F Low Level Flushing Cistern Of 10 Litres Capacity (Is : 2556Mark). Of Approved Make With Complete Fittings C.I. Brackets Duly Painted, Brass Ball Cock With Ball, (Is: 1703 Mark) Complete Including Cutting And Making Good The Wall:Pvc With Pvc Bend And Superior Internal Fittings As Per Is :7231 43 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Bend 87.5 110Mm Dia 44 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant Plain Floor Trap 110 Mm Dia 45 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant P-Trap 110 Mm Dia 46 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant Vent Cowel 110 Mm Dia 47 S/F Rcc Main Hole Covers With Frame Of Approved Make (Light Duty) Size 450X450 Mm 48 P/F Grating Of Approved Quality Stainiese Steet Sheet Size 125 Mm Dia 49 Construction Of Soakage Well In All Types Of Soil Of Approved Drawing , Top 90 Cm Portion In 450 Mm Thick With Cement Mortar 1:6 80 Mm Stone Slab Covering Jointing Of Slab In Cm 1 : 3, Ralthal, Kharanja, 40 Mm Thick M-15 Grade C.C. Flooring Earthwork Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr.Inner Dia 90 Cm & 10 To 12 M Deep 50 Construction Of Chamber In All Types Of Soil With 300 Mm Thick Masnory In Cm. 1 : 6, 100 Mm Thick C.C. 1 : 5 : 10 In Foundation , 20 Mm Thick Inside Plaster In Cm 1 : 6, Finished With Floating Neat Cement 50 Mm Thick M-15 Grade C.C. Flooring Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr.Inside Size 450 X 450 Mm Depth Upto 0.5 M & 5 Kg Ci Cover With Frame. 51 P & F Ball Cock (Is : 1703 Mark) With Rod & P.V.C. Ball Complete.Brass Wt. 300 Gm, 15 Mm 52 P & F 15 Mm Dia Connection Pipe Of Approved Quality Make Pvc Pipes With Nuts 450 Mm. 53 P & F Stop Cock (Is:8931 Mark),Superior Quality And Of Approved Mark: Brass 400 Gm. 15 Mm Nominal Bore 54 P & F Pvc Storage Tank Isi Marked ( Is : 12701) Indicating The Bis License No. Of Approved Make With Cover , 25Mm Dia 1 M Long G.I. Overflow Pipe & 25 Cm Long Wash Out Pipe With Plug & Socket Including Making Connection Etc. Complete Of Approved Design 500 Litres Capacity 55 Construction Of Septic Tank In All Types Of Soil With 40 Cm .Thick Masonry In Cm 1:6, 15 Cm Thick C.C Bed Of 1:5:10, M- 15 Grade C.C Floor & Rcc Slab Covering With M15 Grade C.C. Floor, 50 Mm Thick Stone Slab Partition Walls, 20 Mm Thickplaster In Cm 1:6 Finished With Neat Floating Cement, 4 Nos Foot Rests Of Approved Design ,Two No. 450 Mm Dia Eachferro Cement Cover With Frame, Earth Work Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earthwithin A Lead Of 50 Mtr:-Size 200X100X130 Cm.(For 10 Users) With 115 Mm Thick Rcc(M-20) Slab With Tor Steel Reinforcement 8Mm Φ @15 Cm C/Cbothways Including Shuttering Complete In All Respe 56 Part C Electrical Work 57 Wiring Of Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade (Is:694) And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & ItS All Accessories( J.B. , Bends Etc.) , Round Tiles,18 Swg Hot Dipped Galvanized Modular Box With Earth Terminal, 6 A Modular Switch, Modular Face Plate With Grid Plate, 3 Pin Ceiling Rose / Lamp Holder/ 3 Pin Connector , Screws Etc, Making Connections,All As Per Pre Approved By Engineer In Charge, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 . For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 58 Short Point (Up To 3 Mtr.) 59 Medium Point (Up To 6 Mtr) 60 Long Point (Up To 10 Mtr) 61 Wiring Of 3/5 Pin 6 Amp. Light Plug Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade (Is:694) And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & ItS All Accessories( J.B. , Bends Etc.) , Round Tiles,18 Swg G.I. Box With Earth Terminal Of Required Size, 6 A Switch, 3/5 Pin 6 A Socket, 3.0 Mm Thick Isi Marked Phenolic Laminated Sheet (Is : 2036 - 1995), Al. Alloy/ Cadmium Plated Iron Screws 20 Mm Cup Washers Etc. All As Per Pre Approved By Engineer In Charge, Making Connections, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 62 On Board 63 S&F Following Sizes (Dia.) Of Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit As Per Pwd Specification For Electrical Works Along With Its Accessories (Is: 3419 ) As Required In Recess Including Cutting The Wall, Covering Conduit And Making Good The Same As Required. All Relative And Latest Acceptance Tests Reports By Any Nabl Accredited Lab For The Conduit Shall Be Submitted Before Execution & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 64 25 Mm Dia 65 Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.99% Purity Copper, Class 5 Stranding In Acc. To Iec 60228 For Lower Watt Loss , Oxygen Free ( 66 2 X 1.5 Sq. Mm 67 2 X 2.5 Sq. Mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Rajasthan View Result →
24.
Railways #11265038 AOC
Design, Manufacture, Supply, Installation, Testing, Commissioning And Proving Of Cnc Vertical Turning Lathe Machine On Turnkey Basis With Leading Parameters As Per Schedule-I Of Annexure Specification Appended With Tender. It Shall Include All The Concomitant Accessories/Equpments (Clause 4.2 Of Section Iv) As Detailed In The Specification And Other Concomitant Accessories/Equipment, Which The Manufacturer Consi Ders Essential To Make The Machine Fully Operational, When Installed And Commissioned. It Shall Also Include I Nstallation And Commissioning Of Related Equipment (Clause 12 Of Section V), Training Of Personnel In Operati On And Maintenance Of Machine (Clause 10 Of Section V) And Supply Of Technical Documentation (Clause 4 O Section V). It Shall Also Include Preventive Maintenance During Warranty Period As Per Clause No. 16 Of Secti On V Of Specification Attached This Tender. The Machine Shall Have The Provisions Of Industrial 4.0. The Firm N Eeds To Provide Inbuilt Hardware (For Industrial 4.0) Capable Of Communicating Vital Parameters For Operation S And Preventive Maintenance Of The Machine, Moreover, The Firm Will Connect The Machine To The Existing In Dustry 4.0 System At Carriage & Wagon Workshop, Bikaner. ] , Camc For 5 Years After Completion Of 2 Years Warranty Period From The Date Of Commissioning & Proving Out Of Machine By Supplier. The Details Of Camc As Defined In Clause 17 Of Section V Of Specificati Ons Appended With This Tender. [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/Wheel/Bkn, Nwr Rajasthan 1.00 Numbers 3 6590188100302 Optional Non Stock --- No Tpi Agency Inr (Cnc) Spares (Y) A Set Of Optional Accessories As Per Para 4.3 Of Section Iv Of Specification Appended With The T Ender. Bidders Are Required To Attach The Price Break Up Of These Accessories In Pdf File Along With Submitted Bid. ] Consignee Sse/Wheel/Bkn, Nwr Rajasthan 1.00 Numbers Inspection Details Stage Inspection Not Required Page 1 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 4 6590188100303 Optional Non Stock --- No Tpi Agency Inr (Cnc) Spares (Y) Consumables:- Defined At Clause 6 Of Section V Respectively Of Specification Appended With Te Nder. The List Of Consumable Spares Shall Be Furnished And Quoted Along With Their Unit Rates. Consumables S Hall Be Supplied Along With The Machine Or As Per Agreed Time Table, If Ordered. Bidders Are Required To Attac H The Price Break Up To These Consumables In Pdf File Along With Submitted Bid. ] Consignee Sse/Wheel/Bkn, Nwr Rajasthan 1.00 Numbers Inspection Details Stage Inspection Not Required 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 0 Days Of Issue Of Contract, Completion Delivery Should Be : Within 517 Days Thereafter Completed With In 517 Days From Issue Of Loa Which Will Include Supply, Installation And Commissioning Work As Per Delivery Schedule Chart As Per Clause 7 Of Section Iv Of Specification Appended With This Tender. Payment Terms S.No Description Payment Terms 1 Payment Terms For Basic Machine And Accomapnied Supply Items(Spares Etc.): The Standard Payment Terms Subject To Recoveries, If Any, By Way Of Liquidated Damages Will Be As Under: (A) 80% Payment Will Be Made On Receipt Of The Material Duly Pre Inspected And Receipted At Site By The Consignee In Good Condition. (B) I) Balance 20% Payment Will Be Made On Furnishing A Bank Guarantee For An Amount Equal To 10% Of The Contract Value, Fully Indemnifying The Purchaser Against All Losses Incurred By The Purchaser During The Warranty Period Within 30 Days Of The Receipt Of Bill Alongwith Proving Test Certiï¬Cate After Successful Completion Of Proving Test In Which The Machine Performance Would Have Been Demonstrated By The Supplier Or His Agent After Its Commissioning At The Consignee Premises. Where, However, The Installation And Commissioning Of The Machine Is Delayed Or Put Off Beyond 90 Days Of The Receipt Of The Goods At The Ultimate Destination Due To Express Written Instructions Of The Purchaser/Consignee, The Balance 20% Payment Shall Be Released To The Supplier On His Furnishing The Necessary Bank Guarantee Of Equal Amount I.E. Balance 20% Valid For The Period As Asked By The Purchaser.Ii) The Bank Guarantee As Mentioned Above Should Be From A Nationalised Indian Bank/Schedule Commercial Bank In India. 2 Payment Terms For Turnkey Charges: As Per Ptc Of Specification Appended With This Tender. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 Irs Conditions Of Contract: The Contract Shall Be Governed By Latest Version (Along With All Correction Slips) Of Irs Conditions Of Contract, And All Other Terms And Conditions Incorporated In The Tender Documents. Page 2 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 2 The Contract Shall Be Governed By The Conditions Of Tender Inquiry , Irs Conditions Of Contract, Speciï¬Cations Attached With This Tender. The Tender Inquiry Conditions, Speciï¬Cations & Special Conditions Of Contract (If Attached) Will Have Precedence Over The Irs Conditions And Conditions Speciï¬Ed In Tender Annexures. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bulk Or Full Order Will Be Placed On Normal Applicable To Yes Yes Allowed Manufacturers Or Its Authorized Agents Who All Bidders (Mandatory) Are Either Registered With Railway For Tendered Item Or Who Has Successfully Supplied Three Numbers (Supply Here Interprets To Supply, Installation & Commissioning Being M&P Item) Tendered Or Similar Item* ,In India,To Zonal Railway /Pu/Core/Psu/Other Govt. Department/ Company Having Average Annual Turnover** Of Rs.100 Cr & Above In Last ϬVe ϬNancial Year And Current ϬNancial Year Up To Date Of Tender Opening. *Deï¬Nition Of Similarity:- Cnc Vertical Turning Lathe With Table Diameter Of 1200Mm Or Bigger. **Documentary Evidence In The Form Of A Certiï¬Cate From The Chartered Accountant Indicating The Turnover Details For The Relevant Period Shall Be Uploaded With The Bid. Page 3 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 2 Performance Criteria: Normal Applicable To Yes Yes Allowed 1. The Tenderer Shall, In Their OffEr, Submit All Bidders (Mandatory) Satisfactory Performance Certiï¬Cate Of At Least 01 No. Of Such Machine (Which Are Counted For The Purpose Of Supply Above). The Machine Covered By These Certiï¬Cates Must Have Worked Satisfactorily For At Least One Year From The Date Of Commissioning As On The Original Date Of Closing Of Tender. The Certiï¬Cate Shall Not Be Older Than One Year From The Original Date Of Closing Of Tender. The Performance Certiï¬Cate Issued After Original Date Of Closing Of Tender (In Cases Where Tender Closing Date Has Been Extended) Are Also Acceptable However The Machine Must Have Completed One Year Of Satisfactory Working After Date Of Commissioning As On Original Date Of Closing Of Tender. To This EffEct, The Performance Certiï¬Cate Submitted By The Tenderer Shall Have Been Issued By The Actual End User Organization Of The Machine (Oï¬Ƒcer Level In Case Of Railway), With Their Clear Signature And Address Therein, In Whose Premises The Machine Is Installed And Commissioned.Specification. 2. All Necessary Information/ Supporting Documents Required For Establishing Performance Eligibility Criteria, As Proof Of Past Supply Credentials Shall Be Submitted By The Bidder Along With Original OffEr Itself And The Onus To Prove Successful Supply And Commissioning In The Stipulated Time Frame Lies On The Bidder. In Case No Information Or Incomplete Information Is Furnished By The Bidder Or Offers Submitting Credential Orders Unaccompanied With Proof Of Supply, Commissioning And Installation, Their OffEr Will Be Liable To Be Ignored. 3 In Case The Tenderer Is An Agent Of The Normal Applicable To Yes Yes Not Allowed Manufacturer, They Should Clearly Indicate All Bidders The Same And Also Enclose Tender Speciï¬C Current Authorization Certiï¬Cate From The Manufacturer To This EffEct On The Letter Head Of Manufacturer And Also Mention The Place Where The Equipment Will Be OffEred For Pre Inspection Before Dispatch. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 1 Micro And Small Enterprises ϬRms In Order Normal Applicable To No No Not Allowed To Avail Themselves Of Beneï¬Ts And All Bidders Preferential Treatments, The Mses Must Be Registered With Any Of The Following: - (A) Udyam (Udyam Registration Certiï¬Cate). (B) Udyog Aadhar Memorandum (Note :- Terminal Date For Consideration Of This Certiï¬Cate Was Till 30.06.2022 Or As Extended By Ministry Of Micro, Small & Medium Enterprises From Time To Time. Thus This Certiï¬Cate (Udyog Aadhar Memorandum) Can Only Be Considered If The Above Terminal Date Is Further Extended Beyond 30.06.2022). Mses Registered With Above Agency/Agencies Must Attach (In The Template - Attach Documents On Techno-Commercial Bid Details Form, As Scanned Copy In Pdf Format) Their Current & Valid Registration Certiï¬Cate Along With Their OffEr. Other Conditions Shall Be As Per Para 4 Of Section-I Of Nwr Tender Condition Document 2 In Case Of Tender Item Cannot Be Split Or Normal Applicable To No No Not Allowed Divided, Etc. The Mse Quoting A Price Within All Bidders The Band L1+15% May Be Awarded For Full/Complete Supply Of Total Tendered Value To Mse, Considering The Spirit Of The Policy For Enhancing Govt. Procurement From Mses. Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Emd Condition: As Per Clause 3 Of Section-I Normal Applicable To No No Not Allowed Of Nwr Sbd Tender Conditions All Bidders 2 Ca Certiï¬Cate: In Cases Of Procurement For Normal Applicable To No No Not Allowed A Value In Excess Of Rs. 10 Crores, The All Bidders Class-I Local Supplier/ Class Ii Local Supplier Shall Be Required To Provide Certiï¬Cate From The Statutory Auditor Or Cost Auditor Of The Company (In The Case Of Companies) Or From A Practicing Cost Accountant Or Practicing Chartered Accountant (In Respect Of Suppliers Other Than Companies) Giving The Percentage Of Local Content. The Certiï¬Cate Should Have Valid Udin Mentioned In Certificate. 3 1.Bidders Have To Quote Rates Of Each Of Normal Applicable To No No Not Allowed The Mentioned Items Individually In Pdf ϬLe All Bidders Such As Concomitant Accessories, Any Other Concomitant Accessories, Spares For Two Year Normal Operation, Concomitant Works Etc (Whichever Applicable ) And The Quoted Cost Will Be Included For The Purpose Of Inter-Se Ranking And Commercial Evaluation Except For Optional Services/Spares/Consumable & Camc. 2. The Price Break Up Quoted By ϬRm Will Be Binding For The Purpose Of Post Contract Management/ Entering Into Separate Contract Based On This Contract. 4 Sd Condition: Security Deposit Will Be 5% Of Normal Applicable To No No Not Allowed The Contract Value . Other Conditions Of Sd All Bidders Will Be As Per Clause 12 Of Section-Ii Of Nwr Sbd Tender Conditions Page 5 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 5 All The Bidders/Tenders Should Ensure That Normal Applicable To No No Not Allowed They Are Gst Compliant And Their Quoted All Bidders Tax Structure/Rates Are As Per Gst Law. In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Igst/Utgst/Sgstact, The Railway Shall Deduct The Applicable Gst From His/Their Bills Under Reverse Charge Mechanism (Rcm) And Deposit The Same To The Concerned Tax Authority. 6 Tenderer Should Mention In Their OffEr: - 1. Normal Applicable To No No Allowed Name Of Manufacture With Complete All Bidders (Optional) Address. 2. Place Of Inspection Be Indicated With Complete Address, Option For Inspections At Godowns/Outstation/Multiple Places Be Strictly Avoided, And Preferably Be Permitted Only At Manufacturers Place. 7 Warranty Obligations: 1. The Warranty Normal Applicable To No No Not Allowed Obligations Shall Stand For 2 Years From All Bidders Installation, Commissioning And Proving Out Of Machine By Supplier (Details Shall Be Referred At Clause 7 Of Section Iv And Clause 16 Of Section V Of Speciï¬Cation Appended With The Tender. 8 Please Enter The Percentage Of Local Normal Applicable To No No Not Allowed Content In The Material Being OffEred. All Bidders Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. 9 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Scope Of Supply: The Scope Of Supply Shall Normal Applicable To No No Not Allowed Include Design, Manufacture, Supply, All Bidders Installation, Testing, Commissioning And Proving Of Machine On Turnkey Basis. It Shall Include All The Concomitant Accessories/Equipment%U2019s As Detailed In The Speciï¬Cation And Other Concomitant Accessories/ Equipment, Which The Manufacturer Considers Essential To Make The Machine Fully Operational, When Installed And Commissioned. It Shall Also Include Installation And Commissioning Of Related Equipment, Training Of Personnel In Operation And Maintenance Of Machine (Clause 10 Of Section V) And Supply Of Technical Documentation. 2 For ϬRms Not Seeking/Eligible For Earnest Normal Applicable To No No Not Allowed Money Exemption, Earnest Money As All Bidders Stipulated In The Notice For Invitation Of Tenders (Nit) Will Have To Be Paid Only Online Through Payment Gateway Link. No Other Mode Of Payment For Emd Is Acceptable. Other Conditions Page 6 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 The Machine Shall Be Inspected And Tested Normal Applicable To No No Not Allowed During DiffErent Stages Of Its Manufacture All Bidders Starting From Raw Material Till The Completion Of Machine, By The Purchaser Or His Authorized Representative At The Suppliers Or His Sub-Suppliers Works. The Quality Assurance Plan As Per Annexure-I Of Section Vi Shall Be Submitted Along With The Bid. The Bidder Must Submit The Exhaustive Qap Incorporating The Tests As Given In Annexure-I Along With Other Tests /Stage Inspection As Followed By Them. 2 The Detailed Norms Regarding Insepction Normal Applicable To No No Not Allowed Shall Be Referred At Clause 9 Of Secton V Of All Bidders Specification Appended With This Tender. 3 Inspection Clause- 1. Inspection -Third Party Normal Applicable To No No Not Allowed Inspection (Tpi) For Indigenous All Bidders Product/Make . 2. Third Party Inspection Against Gc/Tc May Be Considered For Foreign Make/Brands, Indian Vendors Supplying Foreign Goods Or Goods Having Large Foreign Content. Documentary Evidence Will Be Required To Be Produced At The Time Of Inspection For The Part/Whole Assembly Which Has Been Claimed As Foreign Part/Whole Assembly. 4 F.O.R.:- Destination Normal Applicable To No No Not Allowed All Bidders 5 Service Facility In India And Techncial Normal Applicable To No No Not Allowed Support: The Tenderer Will Clearly Spell Out All Bidders In The OffEr The Facilities Available With Him Or His Agent For Providing Adequate After- Sales Service In India During Warranty Period . The Complete Details Such As Organization For After Sales Service, Availability Of Technically Competent Engineers And Warehousing Facilities For Spares Should Be Clearly Indicated. Bidders Not OffEring Complete Servicing/Repair Facilities In India To Ensure Quick Response To Maintenance/ Servicing Calls Are Not Likely To Be Considered. Detailed Condition As Para Clause 13 Of Section V Of Specification Appended With The Tender 6 Purchaser Reserves The Right To Verify At Normal Applicable To No No Not Allowed Any Time, The Details Submitted By The All Bidders Bidder By Actual Site Visit. If The Information Furnished In The Bid Is Found To Be Incorrect During Veriï¬Cation, The Bid Shall Be Considered Invalid And Their Emd Shall Be Forfeited, And Necessary Action Will Be Initiated Including Suspending Business With North Western Railway. It Is The Bidders Responsibility To Ensure That The Information In The OffEr Remains Unchanged For The Validity Of The OffEr And Must Be Verifiable During This Period. 7 This Tender Complies With Public Normal Applicable To No No Not Allowed Procurement Policy Order,2017(Along With All Bidders Revisions/Addendums/Additions Issued From Time To Time ) With Respect To Make In India Policy. 8 The Delivery Speciï¬Ed In Tender Schedule Normal Applicable To No No Not Allowed Covers The Complete Time Period Required All Bidders For Supply, Installation & Commisssioning. 9 Foundation And Related Drawing, Approvals Normal Applicable To No No Not Allowed Of Ga, Foundation And Related Drawings: As All Bidders Per Clause 11 Of Section V Of Speciï¬Cation Appended With The Tender. Page 7 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 10 As Per The Section Iv Clause 2.2. I.E Leading Normal Applicable To Yes Yes Not Allowed Parameters (Schedule-I): All Bidders 2.2.1 Major Parameters(Note: No Deviation Is Permitted In Major Parameters.The Bidder Should Indicate The Actual Parameters Offered). 11 The Bidder Shall Furnish Along With The OffEr Normal Applicable To No No Not Allowed A List Of All Critical Items/ Sub- Assemblies All Bidders Which Are Bought Out By The Bidder And Proposed To Be Used, Along With The Manufacturers Name, Brand Model Etc.The Manufacturer Shall Produce Invoices Of Bought Out Items/Sub-Assemblies To Ensure Genuineness Of Such Products / Veriï¬Cation By The Inspecting Agency. 12 Training:- Contractor Shall Train The Railway Normal Applicable To Yes Yes Not Allowed Staff Regarding Operation And Maintenance All Bidders Of Equipment During Commissioning Of M&P.(Detailed Training Norms Shall Be Referred At Clause 10 Of Section V Of Specification Appended With This Tender) 13 As Per The Section C Clause 13.0 Service Normal Applicable To Yes Yes Allowed Facility In India And Technical All Bidders (Mandatory) Support:The Complete Details Such As Organization For After Sales Service, Availability Of Technically Competent Engineers And Warehousing Facilities For Spares Should Be Clearly Indicated. Bidders Not OffEring Complete Servicing/Repair Facilities In India To Ensure Quick Response To Maintenance/Servicing Calls Are Not Likely To Be Considered. Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 In Case The Clause Of Nit Instructs For Normal Applicable To No No Not Allowed Submission Of Requisite Document And The All Bidders Document Uploading Tab Corresponding To That Clause Has Been Deï¬Ned As -Not Allowed/Allowed(Optional) Shall Be Ignored And The Bidders Are Instructed To Upload The Requisite Document Invariably Along With Submitted Bid At Another Available Field For Document Uploading. 2 1. The Tenderer Should Quote Camc Rates Normal Applicable To No No Not Allowed Separately At The Designated ϬElds For The All Bidders Period Of 5 Years 2. For Tenders Containing Camc, The Charges Of Camc For ϬVe Years Would Also Be Included In The For Destination Price Quoted For M&P For The Purpose Of Comparative Evaluation Of Offer. 3.Tenderers Shall Note That Railway Reserves The Right To Settle And Place Purchase Order For Tendered Item With Or Without Camc Decision Of Railways Shall Be Final In This Regard. 4. With Reference To Post Contract Maintenance, This Tender Has Been Ϭ‚Oated Exclusively For Camc Requirement . Amc/Camc If Speciï¬Ed Elsewhere In Tender Document /Annexures Shall Be Read As Camc And Prices Are To Be Quoted Accordingly. 3 Technical Speciï¬Cations For Cnc Vertical Normal Applicable To No No Not Allowed Turning Lathe Shall Be As Per The All Bidders Specification Appended With This Tender. Page 8 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 4 The Section I, Ii & Iii (Sbd Nwr Document) Normal Applicable To No No Not Allowed Are Meant For Generalised Application All Bidders Wherein The Situation/Condition Has Been Not Deï¬Ned Elsewhere In Electronic Sor And Speciï¬Cation Appended With The Tender. 5 For Condition Speciï¬Ed In Electronic Sor, Normal Applicable To No No Not Allowed The Condition Speciï¬Ed In Elctronic Sor Will All Bidders Have Precedence Over Conditions Speciï¬Ed Elsewhere In Nit I.E Annexures Appended With The Tender. For Conditions Not Speciï¬Ed In Electronic Sor, The Conditions Specified In Annexures Will Prevail. 6 Delivery Schedule Chart: As Per Clause 7 Of Normal Applicable To No No Not Allowed Section Iv Of Speciï¬Cation Appended With All Bidders This Tender. 7 For Traders, Non Submission/Uploading Of Normal Applicable To No No Not Allowed Valid Oem Authorization Letter Will Make All Bidders Their OffEr Invalid And OffEr Will Be Summarily Rejected. 8 The Price Break Up Quoted By ϬRm Will Be Normal Applicable To No No Not Allowed Binding For The Purpose Of Post Contract All Bidders Management/Entering Into Separate Contract Based On This Contract. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Whenever, Standard Technical Requirement Normal Applicable To No No Not Allowed Document Has Been Appended With The All Bidders Tender Document, The Participants Are Required To Conduct Comprehensive Study Of The Technical Speciï¬Cations And Deviations If Any, Shall Be Indicated In The Designated Data Entry ϬEld Of Ireps Bid Submission Form. Technical Deviations Quoted Elsewhere Are Liable To Be Ignored. 2 No Deviation Shall Be Permitted Against Normal Applicable To Yes Yes Not Allowed Leading Parameters Speciï¬Ed At Clause 2.2 All Bidders Of Section Iv Of Specification Appended With This Tender. Deviations Other Than The Leading Parameters, For Deviation If Any, (Other Than Leading/ Major Parameters Of Machine For Which No Deviations Shall Be Permissible) Bidders Are Required To Quote The Same Indicating Clause No. And Relevant Documents In The Statement For Commercial And Technical Deviations. Any Deviation Quoted Elsewhere Shall Not Be Considered And It Will Be Presumed That The Bid Meets/Complies The Tender Conditions. Bidders Need Not Quote Clause Wise Comments Against Various Clause Of Bid Document And May Only Quote Deviations Except For The Detail As Per Technical Bid Annexure-A Of Section Vi If Any, In The Respective Deviation Statement (This Condition Will Supersede The Corresponding Conditions Mentioned Elsewhere In Tender Documents). 3 Bidders Are Required To Furnish Details Of Normal Applicable To No No Allowed Bought Out Items As Per Clause 14 Of All Bidders (Optional) Section V Of Specification Appended With This Tender. Page 9 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 4 Firm Shall Conduct Exhaustive Study Of The Normal Applicable To No No Not Allowed Annexures Present In The Annexure- All Bidders Speciï¬Cation And Shall Submit Duly Signed Annexures Which Are Required At Bid Submission Stage. The Proformos Meant For Post Contract Stage May Be Ignored At Current Stage And Shall Be Utilized For Post Contract Activities. 5 List Of Components To Be Loaded On The Normal Applicable To No No Not Allowed Machine: As Per Annexure F Present In All Bidders Annexure- Speciï¬Cation Appended With The Tender. 6 Railway Reserves The Right To Modify The Normal Applicable To No No Not Allowed Requirement Regarding Staged Inspection As All Bidders Per Applicable Str/Speciï¬Cations At Later Stage. 7 The Bidder Must Submit The Technical OffEr Normal Applicable To No No Not Allowed As Per The Format Given In Annexure-A In All Bidders Section - Vi. All The Information As Asked For, In The Format Must Be Given Accordingly E.G Wherever A Parametric Value Is Asked It Should Be Furnished, If A Write Up Is Asked For This Should Be Provided And If A Brochure Or Drawing Or Sketch Is Expected This Should Be Provided. In Case Of Incomplete/Sketchy/Illegible Information, The Technical OffEr Will Be Considered As Incomplete And Liable To Be Rejected. 8 Proving Test: As Per Clause 2.5 & 2.6 Of Normal Applicable To No No Not Allowed Section Iv Of Speciï¬Cation Appended With All Bidders This Tender. Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Participation In Tender Will Be Considered Normal Applicable To No No Not Allowed That Following Certiï¬Cate Has Been Signed All Bidders By All The Bidders Unless Otherwise Speciï¬Cally Mentioned In Its OffEr I Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India; I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country, Has Been Registered With The Competent Authority, I Hereby Certify That This Bidder Fulï¬Lls All Requirements In This Regard And Is Eligible To Be Considered. Note: Any False Declaration And Non-Compliance Of The Above Would Be A Ground For Immediate Termination Of The Contract And Further Legal Action In Accordance With The Law. 2 Participating ϬRm Undertakes That Quoted Normal Applicable To No No Not Allowed Technical Deviation With Respect To All Bidders Quantity/Parameter/Any Other Technical Speciï¬Cation Will Not AffEct The Smooth Operation, Functionality And Reliability Of The Equipment 3 Firm Undertakes That Careful Examination Normal Applicable To No No Not Allowed The Contents Of Po/Loa ( Whichever Is All Bidders Issued ϬRst) Will Be Conducted By ϬRm Within Ten Days Of The Issue Date Of Loa/Po And In Case Any Discrepancy Noted, Shall Make A Representation Within Ten Days Of The Date Of Po/Loa. Any Representation Thereafter For Dp Re- ϬXation On This Ground Will Not Be Entertained. 4 The Participating Firm Undertakes That It Normal Applicable To No No Not Allowed Has Been Not Debarred/Black All Bidders Listed/Suspended/Banned By Railways For Business Purpose. Page 10 Of 11 Run Date/Time: 07/05/2025 17:52:41Stores/North Western Rly Tender Document Tender No 65245036 Closing Date/Time 25/06/2025 14:25 5 We Hereby Declare That In Quoting The Normal Applicable To No No Not Allowed Above Price, We Have Taken Into Account All Bidders The Full EffEct Of Input Tax Credit Available Under Gst. We Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser (Railway) Accordingly. We Also Undertaken That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. The Contractor Shall Be Gst Complaint And Claim The Applicable Gst In Their Bills, Which Will Be Paid By The Railways 6. Documents Attached With Tender S.No. Document Name Document Description 1 4390879.Pdf Irs Condition 2 5318947.Pdf Specification 3 5317886.Pdf Nwr Sbd The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm2 ( Rajendra Solanki ) , A Set Of Optional Accessories As Per Para 4.3 Of Section Iv Of Specification Appended With The T Ender. Bidders Are Required To Attach The Price Break Up Of These Accessories In Pdf File Along With Submitted Bid. ] , Consumables:- Defined At Clause 6 Of Section V Respectively Of Specification Appended With Te Nder. The List Of Consumable Spares Shall Be Furnished And Quoted Along With Their Unit Rates. Consumables S Hall Be Supplied Along With The Machine Or As Per Agreed Time Table, If Ordered. Bidders Are Required To Attac H The Price Break Up To These Consumables In Pdf File Along With Submitted Bid. ]
Contract Date: Jun 11, 2026 Contract Value : ₹ 2.22 Crore
Government Departments No of Bidders 1
Rajasthan View Result →
25.
Public Administrative Department #11258632 AOC
Tender For Providing And Fixing Of Spares For Ht, Lt, Apfc, Starters, Other Panels And Repairing Of Various Equipment And Electrical Installation For Gangapur Dam Pumping Station, Booster Pumping And Various Tp Of Nmc.-1 P/F digital ammeter for measuring current 2 P/F digital voltmeter for measuring voltage 3 P/F multifunction meter 4 P/F selector switches for voltmeter & ammeter 5 P/F light emitting diode type indicator 6 P/F switch disconnector fuse (SDF) a 100A. b 200A. c 300A. d 400A. e 630A. f 800A. 7 P/F moulded case circuit breaker (MCCB) a Up to 100A. b 200A. c 250A. d 315/400A. e 600 / 630A. f 800A. 8 P/F MCB a 6A to 32A b 40A to 63A. c P/F One way distribution board suitable for MCB 9 P/F Busbar chamber with triple pole neutral aluminium bus bar a 100A. b 200A. c 300A. d 400A. e 630A. f 800A. 10 P/F DOL starter a Up to 7.5HP. b Up to 10HP. 11 P/F street light bracket complete 12 P/F FRP box on pole/wall complete a 150mm x 125mm x 100mm, 2.7 mm thick b 250mm x 200mm x100 mm, 2.7 mm thick c 300mm x 200mm x125 mm, 2.7 mm thick 13 P/F LED 22W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete 14 Providing and filling Transformer oil 15 Point wiring in PVC trunking (casing-capping) with (2+1E) copper wire, modular type switch, earthing and required accessories 16 Point wiring for independent plug in PVC trunking (casing capping) with (2+1E )FRLSH grade copper wire, modular type switch, earthing and required accessories 17 P/F mains with 2 X 2.5sq.mm 1.1KV grade copper PVC stranded/solid wire complete (2 core, 71+36(1 core earthing)=107/- ) 18 Supplying and erecting PVC trunking (PVC casingn- capping) of size 25mm with accessories on wall/ceiling 19 P/F half round 15cm dia RCC hume pipe with necessary back filling etc complete 20 Providing and spreading stone metal 25mm size for 100mm depth above the ground level. 21 P/F three phase heavy duty power capacitors in suitable banks with voltage rating 440V, 50Hz 22 Providing and laying Aluminium conductor 3.5 core XLPE/PVC armoured 1.1KV grade cable a 25sq.mm b 35sq.mm c 50sq.mm d 70sq.mm e 95sq.mm f 120sq.mm g 150sq.mm h 185sq.mm i 240sq.mm j 300sq.mm k 400sq.mm 23 Providing and laying Aluminium conductor 1 core XLPE/PVC armoured 1.1KV grade cable a 1 Core, 630sq.mm b 1 Core, 800sq.mm c 1 Core, 1000sq.mm 24 Providing and laying Aluminium conductor 4 core XLPE/PVC armoured 1.1KV grade cable a 4sq.mm b 6sq.mm c 10sq.mm d 16sq.mm 25 Providing and laying Aluminium conductor 2 core XLPE/PVC armoured 1.1KV grade cable a 4sq.mm b 6sq.mm c 10sq.mm 26 Providing and laying copper conductor 2.5sq.mm XLPE/PVC armoured 1.1KV grade cable a 2 Core, 2.5sq.mm b 3 Core, 2.5sq.mm 27 P/L flexible PVC sheathed submersible type copper cable. a 4 core 2.5 sq mm b 4 core 4 sq mm c 4 core 6 sq mm d 4 core 10 sq mm e 4 core 16 sq mm f 4 core 25 sq mm g 4 core 35 sq mm 28 Providing and laying Alu. conductor 3 core, XLPE /PVC 3.3KV armoured cable a 70sq.mm b 95sq.mm c 120sq.mm d 150sq.mm e 185sq.mm f 240sq.mm g 300sq.mm h 400sq.mm 29 P/F heat shrinkable outdoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 30 P/F Heat shrinkable indoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 31 P/F Heat shrinkable straight through joint kit for 3 core, 3.3Kv (E) XLPE HT cable etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 32 Providing and laying Aluminium conductor 3 core, XLPE/PVC 11KV armoured cable a 95sq.mm b 120sq.mm c 150sq.mm d 185sq.mm e 240sq.mm f 300sq.mm 33 P/F heat shrinkable outdoor termination kit for 11Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-95sq.mm b 120-185sq.mm c 240-300sq.mm d 400sq.mm 34 P/F Heat shrinkable indoor termination kit for 11Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-95sq.mm b 120-185sq.mm c 240-300sq.mm d 400sq.mm 35 P/F Heat shrinkable straight through joint kit for 3 core, 11Kv (E) XLPE HT cable etc complete a 70-95sq.mm b 120-185sq.mm c 240-400sq.mm 36 Providing and laying Alu. conductor 3 core, XLPE / PVC 33KV armoured cable a 95sq.mm b 120sq.mm c 150sq.mm d 185sq.mm e 240sq.mm f 300sq.mm 37 P/F heat shrinkable outdoor termination kit for 33Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 38 P/F Heat shrinkable indoor termination kit for 33Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 39 P/F Heat shrinkable straight through joint kit for 3 core, 33Kv (E) XLPE HT cable etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 40 P/F Heat shrinkable straight through joint kit for flexible PVC sheathed submersible type copper cable. a 4 core 2.5 sq mm b 4 core 4 sq mm c 4 core 6 sq mm d 4 core 10 sq mm e 4 core 16 sq mm f 4 core 25 sq mm g 4 core 35 sq mm 41 P/F HT capacitor suitable for 3.3KV in suitable banking 42 Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete 43 Powder coating in siemens gray colour 44 Making Iron work for fabrication with bending, cutting, drilling and welding complete 45 Epoxy painting on both side of approved colour shade of provided iron work 46 P/F GI strip of suitable size 47 P/F M.S. stand for fire bucket 48 P/F Wall hook for fire bucket 49 P/F G.I fire bucket 9Lit 50 P/F Instruction chart 51 Pair of rubber hand gloves 52 Supplying and erecting fire extenguisher 4.5Kg 53 P/F High voltage insulating Electromat confirming to IS 15652 :2006 a Suitable for 3.3KV. b Suitable for 11KV. c Suitable for 33KV. 54 Providing and laying double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete a 50 mm b 75 mm c 90 mm d 120 mm e 160 mm f 175 mm g 200 mm 55 P/F Flood light LED fitting for street light a 50W b 70W c 100W d 120W e 155W f 195W 56 P/F aluminium PVC unarmoured cable 2 X 6sq.mm of 1.1kv grade 57 P/F mini feeder pillar triple pole with 200A MCCB as incomer etc complete 58 P/F mini feeder pillar triple pole with 300A MCCB as incomer etc complete 59 P/F fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work complete 60 P/F double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire meshcomplete 61 P/F 50 x 50 x 6mm angle iron corner support 0.5m away from fence support fixed etc. 62 Providing and fixing ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps 63 P/F analog Ammeter for measuring current 64 P/F analog Voltmeter for measuring voltage 65 Providing and laying XLPE armroured cable for 3.3KV with ISI mark 1 core 630 sq.mm. stranded aluminium wire in an approved manner. 66 P/F heat shrinkable outdoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected the supply with insulated sleeves,additional lugs nut bolts for 1 x 630 sqmm cable with HT testing site etc complete 67 P/F programmable logic controller for Thyristor logic KPOPF – 406 – T. 68 P/F Injector module for Thyristor logic KPIPF 406 – T. 69 P/F Zero switching module for Thyristor logic KPZPF – 406 – T. 70 P/F current generator 440V, 50Hz, for final compensation of real time PFC after basic compensastion using programmable logic controller, relay module, ZCS control thyristor units with its software, hardware, power and control cabling etc complete. a Up to 42A b 42A to 56A c 70A to 105A. d 112A to 140A 71 P/F ROM-51 memory controller with accessories along with routine software program for Thyristor logic. 72 P/F ROM-51 memory controller with accessories along with routine software program for zero switching logic. 73 P/F voltage transformer with 11V, 18-0-18V, 22V, 8V secondary. 74 P/F output module for soft starter-KPOSS-306. 75 P/F proportional Integral card with operational amplifier KPISS-306. 76 P/F analog to Digital converter ATD-09. 77 P/F MCR-31 Main controller with accessories. 78 P/F 7-Segment common anode display controller DSP-79 with accessories. 79 P/F RAM-64 memory unit with accessories. 80 P/F ROM-SS-64 memory unit with accessories along with routine software program. 81 P/F ROM-SS-51 memory unit with accessories along with routine software program 82 P/F flat band cable set 26pin. 83 P/F flat band cable set 20pin. 84 P/F glass type relay O/E/N RL-24. 85 P/F 2A fuse box of EI for power supply (20Nos). 86 P/F 2A glass fuse base open type FBO. 87 P/F tertiary current transformer 88 P/F PLA relay 24D 1NO RDRL-24. 89 P/F SMPS ripple filter choke 5V DC, 1500mA. 90 P/F 24VDC, 10A Electromechanical relay PLA and snubber. 91 P/F voltage transformer with O/P 6.8V, 11.5V, 22.5V Delta to star. 92 P/F programmable logic controller module for contactor logic KPOPF – 406 – C. 93 P/F injector module for contactor logic KPIPF – 406 – C. 94 P/F relay module for contactor logic KPRLPF – 406 – C. 95 P/F ROM-51 memory controller with accessories along with routine software program for contactor logic. 96 P/F thyristor back to back connected suitable for following starters and Capacitor banks. a 75HP. b 120HP. c 215HP. d 300HP. e 10KVAR f 15KVAR g 20KVAR h 25KVAR i 30KVAR 97 P/F inductor suitable for following Capacitor banks. a 10KVAR b 15KVAR c 20KVAR d 25KVAR e 50KVAR 98 P/F electrical contactors. a 32A. b 40A. c 70A. d 110A. e 200A. f 300A. g 400A. h 650A 99 P/F main contact kit for power contactor. a 32A. b 40A. c 70A. d 110A. e 200A. f 300A. g 400A. h 650A 100 P/F HRC fuses. a 40A. b 50A. c 63A. d 100A. e 125A. f 160A. g 200A. h 250A. i 315A. j 400A. k 630A. l 800A. 101 P/F fuse bridges. a Up to 32A. b 63A. c 160A. d 250A. e 800A. 102 P/F change over switches. a 63A. b 125A. c 200A. d 250A. e 315A. f 400A. g 630A. h 800A. i 1000A. 103 P/F timers. a ET-100. b Star-Delta. 104 P/F FASD starter. a ML2 b ML3 c ML4 105 P/F energy efficient street light fitting using 36W CFL lamps complete. 106 P/F 11KV HT fusegear for fuse switch unit of CGLucy 107 Actuator control unit. a P/F forward / reverse contactor b P/F over load relay. c P/F contact kit 108 Providing and laying copper conductor 12 core 2.5sq.mm XLPE/PVC armoured 1.1KV grade cable 109 P/F electronic control unit suitable for up to 175HP, control Supply 240V AC, Power Suply 415V AC, with all test and trials complete. 110 P/F electronic control unit suitable for up to 300HP, control Supply 240V AC, Power Suply 415V AC, with all test and trials complete. 111 P/F limit Switch for gate 112 P/F 10 Turns Preset. 113 P/F panel accessories such as push button with indicators, NO/NC contact, emergency stop push button, copper lug for control cable, gasket, etc complete. 114 P/F C I pipe type earthing etc complete. 115 P/F 230V, 2 C/O panel mounted relay. 116 P/F single phasing preventer relay 117 P/F single phase, under voltage, over voltage protection relay. 118 P/F oil temperature sensing relay 119 P/F winding protection relay 120 P/F reverse rotation sensing relay 121 P/F Motor protection relay for LT motor 122 P/F Control transformer with protection circuit 123 P/F PVC type earthing chambers with accessories for earthing. 124 Power contactor coil LC-1F 330 125 P/F sequence controller 126 Providing, fixing termination box for submersible pump to ATS starter with bus bar, terminations etc complete 127 Providing and laying 95sq.mm copper conductor 1 core flexible PVC unarmoured 1.1KV grade cable 128 Energy meter panel a P/F Energy meter single phase 230V, 50Hz, 10A supply complete b P/F Energy meter 3 Phase, 4 wire, 50Hz, 100A supply complete c P/F L.T. Current transformer of suitable ratio d Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete e Powder coating in siemens gray colour f Control wiring using copper wire, ferrule, lugs, tie saddle, spiral etc complete. g Panel accessories such as hardware, gasket, insulator, panel knob, panel lock for each feeder complete . h Dismantling of old meter panel by disconnecting connections of all cables, etc complete i Installation of new meter panel by fixing meter box, making incoming and out going connection etc complete. 129 Starter Panel a P/F digital ammeter for measuring current b P/F digital voltmeter for measuring voltage c P/F selector switches for voltmeter & ammeter d P/F light emitting diode type indicator e P/F L.T. Current transformer of suitable ratio f Providing and fixing Main Incommer 63A moulded case circuit breaker g P/F 100A Busbar chamber with triple pole neutral aluminium bus bar h Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete i Making Iron work for fabrication with bending, cutting, drilling and welding complete j Powder coating in siemens gray colour k P/F DOL ML 1.5 starter l P/F FASD ML2 starter m P/F FASD ML3 starter n P/F FASD ML4 starter o P/F Over load relay. p Control wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete. q Local/remote wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete. r Panel accessories such as hardware, gasket, insulator, panel knob, panel lock, bus bar terminals, etc complete. s Dismantling of old starter panel by disconnecting connections of all cables, etc completet Installation of new starter panel by fixing starter panel, making incoming and out going connection etc complete. u Terminations main outgoing cables by using lugs glands etc complete. 130 LT Panel, Changeover Panel, Distrubution Panel, Feeder Panel a Power wiring up to 63A feeder using copper wire, lugs, tie saddle, spiral etc complete. b Control wiring for metering using copper wire, ferrule, lugs, tie saddle, spiral etc complete. c Panel accessories such as hardware, gasket, insulator, backlite, panel knob, panel lock, push button with indicators, heavy duty connectors earthing arrangement, etc complete for following feeders i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A d Dismantling, disconnecting connections of all cables, shifting old panel in godown etc complete of following capacity. i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A e Installation of panel at desired place including loading unloading and transportation of following capacity i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A f Making new terminations of main incoming/outgoing cables, etc complete for following feeders. i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A g Interlocking, forward/reverse, timing and control circuit/star delta circuit etc control wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete for one feeder. 131 P/F 3 phase street light timer controller of 60 A per phase rating with in-built relay, timer, protections, display 132 Providing, fixing and testing of HT TOD meter of appropriate class with required accessories along with co ordnation with MSEDCL complete. 133 Providing, fixing and testing of LT TOD meter of appropriate class with required accessories along with co ordnation with MSEDCL complete. 134 P/F Motor protection circuit breaker 135 P/F 3 Phase heavy duty industrial socket. 136 P/F 1 Phase heavy duty industrial socket. 137 P/F and erecting 6mm Polycarbonate multiwall ultravoilet protected sheet for roofing over fabricated steel structure as per detail design, including fixing the Polycarbonate sheet with alluminium angle & Flat anodized & dyed as per approved shade including all water proofing materials, nuts bolts hardware, labour & square pipe, angles, fabrication complete including all hardware etc. as required . (only actual area of polycarborted sheet to be considered for measurements) 138 Making isolation circuit using AB switch / D.O. Set for single pole & converting the cutpoint by dismantling with nessasary material, jumping, earthing along with arrangement of shutdown etc. complete. 139 P/F diesel filling pump for filling diesel in dg sets from store tanks etc complete. 140 P/F meter box for single phase energy meter complete. 141 P/F meter box for three phase energy meter with compartment for mccb/mcb etc complete. 142 P/F of spares for DG control panel a Flush mounted panel meter three phase four wire for frequency etc. b 12V/80AH Battery c 12V/100AH Battery d 12V/150AH Battery e 12 V/180AH Battery f 12V/200AH Battery g Battery water h EPU unit i AVR j AMF Controller k Voltmeter DC l Ammeter DC m Push button n ESR D1 o 12V battery charger p 24V battery charger q Overload relay r Relay s Electronic Timer t Hooter u Connector 143 Reconditioning of transformer a Inspection of distribution transformer on HV and LV side b Dismantling the distribution Transformer from the plinth / foundation c Providing and filling Transformer oil d Painting of transformer using smoke gray paint complete e Providing and rewinding of copper material for HT coils f Heating of core and winding, including removing of moisture etc complete g Providing oil arresting sheet for low tension side of R Y B studs, 5mm thick properly fitted in the studs of transformer. h Providing oil arresting sheet for top cover of oil chamber, LT connection box, oil tank etc parts ,5mm thick properly fitted in the top cover and nut bolts of transformer i Providing R Y B stud bushings over the oil arresting sheet on the studs of transformer . j Reinsulation by high quality uniform covering throughout of 11KV windings using accessories complete k Reinsulation by high quality uniform covering throughout of 415V windings using accessories complete l Repairing and servicing of tap changer of transformer m Transformer oil filtration n Changing silica jel of breather and adding breather oil. o Loading, unloading and transportation of transformer. p Attendance, engineering charges for connection of HT/LT cables and giving satisfactory test & trials of transformer complete 144 P/F Analog input module AI 2xI, 4-wire transmitter (+/-20 mA /13 bits+sign, 4 mA to 20 mA/13 bits), standard 145 P/F Analog input module AI 4xI, 2wire- MU(4..20mA), standard 146 P/F Digital output module DO 8xDC24V/0.5A, supports isochrone mode 147 P/F Power module PM-E for electronic modules, 24 VDC, with diagnostics 148 P/F Digital input module DI 8xDC24V, supports isochrone mode 149 P/F IM151-8PN/DP central processing unit work memory 192KB; 0.06ms/1000 instructions; PROFINET connection; S7 communication (loadable FBs/FCs); PROFINET IO-Controller; supports RT/IRT; PROFINET interface and 3 ports; MRP; PROFINET CBA; PROFINET CBA-Proxy; transport protocol TCP/IP, 150 P/F Communication module with a serial interface (RS232, RS422 or RS485) and Modbus master log with 8 byte I/O interface 151 P/F Communication module with a serial interface (RS232, RS422 or RS485) and Modbus slave log with 8 byte I/O interface 152 P/F Programmable logic controller 1769 TW Digital input module 32 point. 153 P/F Programmable logic controller 1769 Analog input module 8C 0-10V 0-20 154 P/F Programmable logic controller 1769 Digital output module 32 point. 155 P/F Programmable logic controller 1769 Power unit. 156 P/F Programmable logic controller 1769 Compact I/O to DSl module. 157 P/F Programmable logic controller 1769CMPAC Logix processor ethernet 2MB 158 P/F Programmable logic controller 1969 Endcap right. 159 P/F Laser printer Spares for VCB 160 P/F closing coil assembly- 4VC49-110 161 P/F tripping coil assembly- 4VC49-106 162 P/F micro switch 163 P/F breaker auxiliary switch 164 P/F spring charging motor 165 P/F closing shaft with spring. 166 P/F tripping shaft with spring. 167 P/F charging handle assembly 168 P/F pinion gear assembly 169 P/F spur gear assembly 170 P/F bridge rectifier 171 P/F spring for tripping catch 172 P/F tripping catch assembly 173 P/F closing catch assembly 174 P/F driving rod assembly 175 P/F nut assembly 176 P/F cam shaft assembly 177 P/F vacuum interrupter Spares for VC 178 P/F closing coil assembly for VC 179 P/F tripping coil assembly for VC 180 P/F 2 Pole auxiliary switch 181 P/F micro switch 182 P/F bridge rectifier 183 P/F vacuum interrupter 184 P/F contact shroud assembly 185 P/F PDS assembly- 4VC19-0027/01 186 P/F shutter assembly- 3VB79-310/04 187 P/F 5 pole auxiliary switch- J309-022 HT Panel Spares 188 P/F moulded contact shrouds- 1VB79-0009/04 189 P/F shutter assembly- 3VB79-0087/02 190 P/F push button- green button with spring. 191 P/F push button- red button with spring. 192 P/F PDS assembly- with fixing nut bolt- 4VC19- 0027/03 193 P/F insulated stud assembly 194 P/F flexible jumper with fixing bolt- 3VC19-0009 195 P/F coupling 196 P/F bus conductor- upper- 4VC13-0002 197 P/F bus conductor- lower 198 P/F top cover for U barrier- 4VC19-0117/01 199 P/F 16 Pin plug with socket- 4VC46-0303 200 P/F PT fuse 201 P/F voltage transformer (PT) of suitable Ratio secondary 110VAC and suitable class: 202 P/F current transformer (CT) of suitable ratio secodary 5A and suitable class. 203 P/F TNC switch 204 P/F local remote switch 205 P/F PVC shroud- CT/PT/CR surg 206 P/F PVC shroud- 630A 207 P/F contact shroud for PT. 208 P/F rubber gasket for door 209 P/F bushing plate- VCB 210 P/F control fuse with assembly, 440V 211 P/F loose vacuum contactor [Electrically held] type JVE1-604. 212 P/F loose vacuum Contactor for soft starter MVC400D, 400Amp, 3.3KV, 2P, Control supply 220VDC, Solenoid type, with 3 economy resistance- CVC0004, 213 P/F electronic timer suitable in HT starter. 214 P/F Over current, Earth fault relay and short circuit protection relay and retrofitting if required. 215 P/F Under voltage/ Over voltage protection relay and retrofitting if required. 216 P/F Master trip relay and retrofitting if required. 217 P/F Trip circuit supervision relay and retrofitting required. 218 P/F auxillary relay for contact multification RE-300 Aux supply: 110V AC / DC 219 P/F auxiliary contactor for vaccum contactor operation 110VDC with resistor complete. 220 P/F limit switch for service & test position 2 Pole. 221 P/F tripping relay VAJH 3NO + 1NC, 110VDC 222 P/F selector switch for HT panel 223 P/F breaker operated switch 10 pole, 5NO + 5NC. 224 P/F power pack unit Input: 110V AC, Output: 110VDC 225 P/F On line UPS pure sine wave with standard features a 1KVA b 2KVA c 3KVA d 6KVA e 10KVA 226 P/F SMF battery a 12 V/17Ah -18Ah b 12 V/26Ah c 12 V/42Ah d 12 V/65Ah e 12 V/100Ah 227 P/F fixed resistor 1000 ohms. 228 P/F safety switch for VC HRC fuse P/F blow pole 1C/O 229 P/F connecting rods for safety switch 230 P/F safety switch for VC trunk Interlock 2 Pole NO + 1NC.231 P/F high voltage 3.6KV HBC fuse links for short circuit protection. 232 P/F and giving satisfactory test and trials of 3.3 KV 104Kvar Capacitor panel as per rate analysis. 233 P/F and giving satisfactory test and trials of 3.3 KV 208Kvar Capacitor panel as per rate analysis. 234 P/F MM30 type protection relay Machining and fabrication works for couplling of actuator and valve 235 P/F Universal joint 236 P/F Mounting bracket 237 P/F Flange 238 P/F Coupler 239 P/F Shaft coupler 240 P/F Additional shaft 241 P/F Fastener bolt, hardware, etc accessories 242 P/F 0.6mm GI sheet 243 P/F regular/ standard model Ceiling fan complete 244 P/F ISI mark modular type (two module) electronic step regulator for fan 245 P/F condenser 2.5 micro farad for ceiling fan 246 P/F anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. 247 P/F fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. 248 P/F fan hook of 10 mm. M.S. round bar grouted in RCC slab 249 P/F ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire 250 P/F heavy duty exhaust Fan 251 Refilling of fire extinguisher of by dismantling from site to workshop for refilling which includes removing of existing powder and cleaning the cylinder, delivery pipe , nozzle internally and refilling new powder complete with reinstalling properly at site 252 Dismantalling old rusted perforated type cable tray.253 P/F hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 100 mm width with necessary coupler plates and hardware in approved manner etc complete. 254 P/F, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity suitable to operate on 250V, 50 cycles, A.C.supply having 1 no of air handling unit hiwall / floor mounting type complete. 255 P/F, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete 256 P/Laying PVC insulated PVC round sheathed 2.5 sq.mm 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV 257 P/F copper pipe suitable for refrigeration system having size 12.7 mm complete. 258 P/F bracket for split type AC 259 P/F copper pipe suitable for refrigeration system having size 15.9 mm complete. 260 P/F Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 12 mm 261 P/F Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 16 mm 262 P/F rigid PVC pipe 20 mm dia.with PVC accessories for drain 263 Carrying out core cutting of size 3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. 264 Providing, Installation, Testing and commissioning of borewell type maintenance free chemical earthing comprising of Electrode of 80 mm diameter rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. 265 Providing, Installation, Testing and commissioning of borewell type maintenance free chemical earthing comprising of Electrode of 80 mm diameter rod of Length 1.5m along with 15 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. 266 Providing and making platform by making excavation for foundation, situ cement concrete of M-10, uncoursed rubble masonry of trap, rubble stone soling 15cm to 20dc thick including hand packing and compacting, situ cement concrete of M20 grade trap, steel bar rainforcement of various diameters for RCC work, sand faced plaster externally in cement mortar, etc complete 267 Providing hand drill Machine 268 Providing hand grinder 269 Providing Crimping tool up to 400sq.mm 270 Providing Insulator tester ( Megger ) cranking type having metal body of range 100 Volts 1000 Ohms 271 Providing fix spanner set 12 piece set 6 -32 mm 272 Providing Bi-hexagon Ring spanner 12 piece set 6 - 32 mm 273 Providing screw driver a Screw driver Engineering pattern 6 X 300 mm b Screw driver Engineering pattern 8 X 200 mm c Screw driver Engineering pattern 5 X 200 mm d Screw driver Engineering pattern 5 X 300 mm e Screw driver with green neon bulb line tester 3.6 X 60 mm 274 Providing Multimeter 275 Providing Tong Tester ( Clip on meter ) of range 0- 10-30-100-1000 Amps and 0-300-600 Volts 276 Providing Ball pen hammer with handle 800 gm 277 Providing Hack saw frame 300 mm size with heavy duty blade 278 Providing blower 279 Providing single phase welding machine 280 P/F fixing isolator suitable for 33KV capacity 281 Providing office regular with handle chair 282 Providing fabricated powder coated rack 283 Providing computer table 284 Providing 18 compartment steel clothes locker with powder coating, locking arrangement, etc complete. 285 Providing regular office wooden table 286 Providing wooden chair 287 Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8mm thick & Top in 2mm thick CRCA, Shutter to be mounted with the help of cuphinges, and adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns 288 Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish 289 Providing & Arrangemnt of High Back chair, Synchronized Mechanism with Multiple Locking, Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery 290 P/F disc type insulator suitable for 33 KV line complete erected with suitable Hardware on provided cross arms as per IS. 291 P/F pin type insulator suitable for 33 KV line, complete erected with suitable hardware on provided cross arms. 292 P/F G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.I. stay rod 20 mm x 1.8 meter length and pole clamps duly erected in provided cement concrete foundation. 293 Providing and fixing Nut bolts and Sundries etc accessories 294 Making isolation circuit for all 3 phases and interlocking the same to provide 33KV output from 2 Nos of 33KV input feeders using accessories etc complete. 295 Dismantling the existing old 33KV circuits and all jumps, accessories, etc complete. 296 Providing and fixing safe shade ESE type lighting arrestor system complete with following details. a P/F safe shade ESE type lighting arrestor as per NFC17-102 (2011) UNE 211862011 standards, CPRI tested, area covered 107 Mtr, etc complete. b P/F GI mast 5mtr long wth base plate complete c P/F 6 Digit counter, etc complete d P/F accessories for lightning arrestor, etc complete. e P/F test link box etc complete. f Providing, laying and terminating single core 35sq.mm copper flexible cable for earthing 297 Providing and making overhead cablling works for clarifier bridge slipring a P/F slipring b Providing and laying copper conductor 1.5sq.mm X 4 core XLPE/PVC 1.1KV grade cable c P/F hardware, bobbin, anchor fastners, cork sheet etc accessories for slipring fixing works. d P/F GI wire of high purity of different sizes used for earthing. e P/F attachment to slipring for entering cable from top using GI pipes, coupling, flange, bend, by machining and threading the components so that cable will remain fix when clarifier is rotating. f Making arrangement using provided GI wire, bobbins to carry the provided cable overhead from filter to clarifier. g Making terminations for slipring main panel, clarifier panel, etc.Part B- Annual maintenance contract 1 Servicing and overhauling of APFC panels. A Servicing of APFC panel by making terminations of power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, tightening all connections, changing hardware, insulator, gasket, replacing provided blown fuses, fuse base, indicators and other parts as required in engineering manner for each bank complete as follows. a Control feeder for 1 to 5KVAR bank. b Control feeder for 5 to 10KVAR bank. c Control feeder for 10 to 20KVAR bank. d Control feeder for 20 to 30KVAR bank. e Control feeder for 30 to 50KVAR bank. B Servicing of main programmable logic controller injector module, ZCS module, by correcting dry solder, calibrations of three phase voltage, currents, all parameters, power supplies, tightening all connections, adjusting preset values to maintain unity power factor, checking transformer voltages, current ratios, checking of panel & cleaning of panel complete. 2 Servicing and overhauling of soft starters. Servicing of contactor by changing provided contact kits, coil, terminations, control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches, servicing of analog card, digital card, display card, correcting dry solder, calibrations of three phase voltage, currents, all parameters, power supplies, adjusting preset values, checking transformer voltages, current ratios, termination of incoming outgoing cables as required. Also tightening of connections, cleaning of panel complete. a 70 to 90HP. b 90 to 120HP. c 120 to 150HP. d 150 to 215HP. e 215 to 300HP. f 300 to 1000HP 3 Servicing and overhauling of starters. Servicing of contactor by changing provided contact kits, coil, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, push buttons, voltmeter, ammeter, selector switches checking oil level and top up, auto transformer links, termination of incoming outgoing cables as required. Also tightening of connections, setting of timers and cleaning of panel complete. a 3 to 7.5HP. b 7.5 to 12.5HP. c 12.5 to 20HP. d 20 to 30HP. e 30 to 50HP. f 50 to 70HP. g 70 to 90HP. h 90 to 120HP. i 120 to 150HP. j 150 to 215HP. k 215 to 300HP. 4 Servicing and overhauling of distribution panels. Servicing ,repairing of distribution panels by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, provided indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections of feeders of following capacity. a Up to 32A b 32A to 63A c 63A to 100A d 100A to 150A e 150A to 200A f 200A to 250A g 250A to 400A h 400A to 630A i 630A to 800A j 800A to 1000A k 1000A to 1250A l 1250A to 1600A 5 OCB to MCCB conversion. Dismantling output starter’s cable terminated to OCB, dismantling incoming and outgoing bus bar of OCB to main LT panel, dismantling OCB from main LT panel properly. Making iron frame for fitting of MCCB. Fitting of MCCB in main LT panel with proper hardware, covering the front open portion with 16SWG MS sheet with adjusting slot for MCCB handle. Terminating the R Y B connection of MCCB with main LT panel’s bus bar using appropriate rating of copper flexible cable and proper copper lugs. Reconnect the output’s starter cable to MCCB, taping all power connections, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches. Replacing indicators and other parts as required. Cleaning of panel, tightening of all connections. 6 Servicing and overhauling of actuator electrical control module. Servicing of actuator electrical control module by servicing of contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 7 Callibrating all presets/sensor for gate/screen with open/close and electronic indication system. Checking control wiring for remote and local operation, adjusting limit switches with proper close and open, giving satisfactory test and trials of remote and local system etc complete. 8 Servicing and overhauling of alum mixer control module. Servicing of alum mixer module by servicing of SFU, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 9 Servicing and overhauling of chlorine plant control module. Servicing of chlorine plant module by servicing of SFU, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 10 Servicing and overhauling of clarifier control module. Servicing of clarifier module by servicing of breaker, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 11 Servicing and overhauling of HT substation. a Servicing and overhauling of 4 pole structure, servicing air break switch by polishing contacts, applying jelly to contacts, alignment of AB switch, servicing and overhauling of D.O. set by polishing hansa and punja, applying jelly to all hansa and punja, changing fuse link tightening of connections, changing hardware, changing ACSR jumper links by properly lugging and binding using alkathene pipe. HT taping of connections, checking of insulators, insulation test of total installation and earth test of earthing pits. b Cleaning of substation area, painting of 4 pole structure , fencing and gate using aluminium paint and scraping old paint. Painting of transformers using AD gray paint and scraping old paint. 12 Servicing and overhauling of 33KV H.T. Substation at Gangapur Dam pumping station. a Servicing of air break switch by polishing contacts, applying jelly to contacts, alignment of AB switch, tightening connections, changing hardware, etc complete. b Painting of gantry structure for air break switch by cleaning all poles channels using aluminium paint 3 coats. c Servicing of D.O. set by polishing hansa and punja, applying jelly to hansa and punja, tightening connection, changing hardware and fuse wire, etc complete. d Painting of gantry structure for D.O set by cleaning all poles channels using aluminium paint 3 coats. e Servicing of PT by checking, lugging, tightening HT and earthing connections, checking, tightening secondary connections, measuring voltages at out put for main bus, bus-1 and bus-2. f Painting of gantry structure for main bus PT by cleaning all poles channels using aluminium paint 3 coats. g Painting of gantry structure for PT bus-1 and bus-2 by cleaning all poles channels using aluminium paint 3 coats. h Painting of PT for main bus, bus-1, bus-2 and MSEDCL by cleaning them and using smoke gray paint 3 coats. i Servicing of VCB by checking operating mechanism, alignment, applying jelly to various parts, control wiring, remote local operation, spring charging, insulation tests for main bus, bus-1 and bus-2. j Repairing servicing of control feeder panel for VCB/VC by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete. k Servicing of CT by checking, lugging, tightening HT and earthing connections, checking, tightening secondary connections, measuring currents at out put for main bus, bus-1, bus-2. l Painting of gantry structure for VCB and CT for main bus, bus-1 and bus2 by cleaning all poles channels using aluminium paint 3 coats. m Painting of VCB for main bus, bus-1 and bus-2 by cleaning them and using smoke gray paint 3 coats. n Painting of CT for main bus, bus-1, bus-2 and MSEDCL by cleaning them and using smoke gray paint 3 coats. o Painting of gantry structure for MSEDCL CTPT structure by cleaning all poles channels using aluminium paint 3 coats. p Painting of gantry structure for cut point by cleaning all poles channels using aluminium paint 3 coats. 16 Repairing of analog input module AI 2xI, 4-wire transmitter (+/-20 mA /13 bits+sign, 4 mA to mA/13 bits), standard 17 Repairing of analog input module AI 4xI, 2wire- MU(4..20mA), standard 18 Repairing of digital output module DO 8xDC24V/0.5A, supports isochrone mode 19 Repairing of power module PM-E for electronic modules, 24 VDC, with diagnostics 20 Repairing of digital input module DI 8xDC24V, supports isochrone mode 21 Repairing of IM151-8PN/DP central processing unit work memory 192KB; 0.06ms/1000 instructions; PROFINET connection; S7 communication (loadable FBs/FCs); PROFINET IO-Controller; supports RT/IRT; PROFINET interface and 3 ports; MRP; PROFINET CBA; PROFINET CBA-Proxy; transport protocol TCP/IP, 22 Repairing of Communication module with a serial interface (RS232, RS422 or RS485) and Modbus master log with 8 byte I/O interface 23 Repairing of Communication module with a serial interface (RS232, RS422 or RS485) and Modbus slave log with 8 byte I/O interface 24 Repairing of Programmable logic controller 1769 TW Digital input module 32 point. 25 Repairing of Programmable logic controller 1769 Analog input module 8C 0-10V 0-20 26 Repairing of Programmable logic controller 1769 Digital output module 32 point. 27 Repairing of Programmable logic controller 1769 Power unit. 28 Repairing of Programmable logic controller 1769 Compact I/O to DSl module. 29 Repairing of Programmable logic controller 1769CMPAC Logix processor ethernet 2MB 30 Repairing of Programmable logic controller 1969 Endcap right. 31 Inhouse Programmable logic controller software devlopment charges. 32 On site commissioning of hardware, testing the complete system, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of control cables as required. Cleaning of panel, tightening of all connections, etc complete. 33 Servicing and overhauling of programmable logic controller panels complete system. Servicing ,repairing of programmable logic controller panels by checking software routine, debugging software, analysing the ladder diagrams, checking hardware and relay module, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of control cables as required. Cleaning of panel, tightening of all connections, etc complete. 34 Repairing, servicing of electromagnetic flow meter a P/F main kit PCB b P/F single card c Panel weather proof including internal wiring and components d Service charges e Setting and callibration of flow meter 35 Reparing of On line UPS pure sine wave by dismanteling, trasportation and reinstalling after repairing complete. a 1KVA b 2KVA c 3KVA d 6KVA e 10KVA 36 Servicing of DG control panel by servicing of EPU unit, battery charger, setting of timer, making control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware procured from material list like voltmeter, ammeter, selector switches, connector, MCB, indicators, push buttons. Also tightening of connections and cleaning of panel complete. 37 Servicing and overhauling of battery charger panel Servicing and overhaulling of battery charger panel by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, provided indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections, cleaning of battery terminals, checking battery voltages, battery cable lugs, etc complete 38 Servicing of RO/UV/UF water purifier by changing/cleaning of carbon filter, pre filter, sedement filter candles, cleaning of water purifier etc complete. 39 Repairing in point wiring wiring for light fan instrument with ISI mark 2-1sq.mm, copper wire PVC insulated 1.1KV grade with necessary accessories as required complete. 40 Repairing in power point wiring with ISI mark 2-1.5 sq.mm, copper wire PVC insulated 1.1KV grade with necessary accessories as required complete. 41 Repairing of board with necessary accessories as required complete. 42 Installation of transformer with loading, unloading, transportation 43 Carrying out necessary tests before and after charging transformer upto full load to satisfaction by connecting earthing, incomming and outgoing cables etc complete. 44 Providing minor repairs to existing plumbing system. 45 Providing major repairs to existing plumbing system. 46 Tracing out fault in cable/cable kit/cubical, removing the connection of cable, taking insulation test. After fixing new cable/cable kit, making termination of the cable again taking insulation test and giving satisfactory test and trials, etc complete. 47 Dismantalling temporary hangging wires accessories, etc complete. 48 Chiselling of wall for laying cable / mains, clamping it properly and refilling the broken wall by using POP etc complete. 49 Repairing, servicing of synchronization panel by servicing of contactor by changing provided contact kits, coil, servicing of electronic controller, control relays terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, push buttons, voltmeter, ammeter, selector switches, termination of incoming outgoing cables as required. Also tightening of connections and cleaning of panel complete. 50 Annual Maintenance Contract for Power Genset includes routine check-up visits with following scope of work and all breakdown visits including spares and major repairs throughout the year. A 82.5KVA Gangapur Dam Pumping Station B 140KVA Shivaji Nagar WTP. C 250KVA Dwarka Pumping Station D 250KVA Gopalnagar Pumping Station E 400KVA Chehedi Pumping Station F 400KVA Nasikroad WTP. G 400KVA Gandhinagar WTP. H 400KVA Nilgiribag WTP. I 600KVA Panchavati WTP Scope of worka B check kit (oil filter set, fuel filter set) shall be changed as required. b Engine oil 15W40 suitable for genset shall be changed as required. c Air cleaner element shall be changed as required. d Coolant shall be filled and top up as required. e Checking temperature, removing leakages, checking battery voltage, battery charging voltage, output voltage, frequency, AVR, tappet setting for good performance of genset. f Routine checkup visits should be done monthly. g Apart from above scope of work all major works to be carried out including all spares of generator excluding panel, batteries as and when required through out the year except total engine failure, natural disaster like flood etc. 51 Transformer oil filtration 52 Making trench in soft soil for laying provided cable 53 Breaking bituminous/ concreate road by JCB/Tractor breaker complete. 54 Providing and casting in situ cement concrete M-15 / 1:2:4 of trap / granite / quartzite / gneiss metal, moulded or chamfered as per drawing or as directed for coping to plinth or parapet, including centering, form work, compacting, covering newly laid concrete by gunny bag, plastic or tarpaulin, roughening them if special finish is to be provided and curing and finishing if required etc. complete. (The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Wooden planks / shuttering will not be allowed) 55 Providing and laying jointless a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee- LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing complete. 56 Repairing, servicing of crane panel by servicing forward/reverse contactor. Checking control wiring, adjusting limit switches, giving satisfactory test and trials of control systems etc complete. 57 Dismantling, disconnecting connections of all cables of ATS starters as fer following details. a Up to 80 HP. b 80HP to 200HP c 200HP to 300HP. 58 Erection of ATS starter panel at desired place including loading unloading and transportation and grouting it properly, etc complete as fer following details a Up to 200 HP. b 200HP to 300HP. 59 Annual Electrical inspection, compliance, test reports of earthing, insulation test etc complete for substation. 60 Annual Maintenance Contract for surge arrestor includes routine checkup visits with following scope of work and all breakdown visits including all spares and major repairs throughout the year etc complete. a Checking of surge arrestor pnumatic system by checking valve, pressure gauge, level gauge, solenoid valve, servicing of surge arrestor tank component, giving test and trials of automatic functioning of magnetic level sensors, checking all pressure etc complete. b Checking of compressor piston ring, gasket, shaft, filter, oil seal, oil ring, discharge valve, inlet valve, oil filling/top up and giving satisfactory test & trials of compressor. i Compressor No-1 ii Compressor No-2 c Checking of control panel for surge arrestor unit by checking terminations, power and control wiring, lugs, tie, saddle, ferrules, bus bars, hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches. Cleaning of panel, tightening of all connections etc complete. 61 Repairing servicing of VCB/VC by checking operating mechanism, alignment of contacts, applying jelly to various parts, tightening all connections, polishing contacts, checking auxiliary contacts, closing coils, terminal strips, VCB/VC operation, insulation tests and giving satisfactory test and trial complete. 62 Repairing servicing of control feeder panel for VCB/VC by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete. 63 Repairing servicing and attending breakdown of CG Lucy unit by checking operating mechanism, alignment of contacts, applying jelly to various parts, tightening all connections, polishing contacts, checking fuses, top up oil level, oil BDV test, CG Lucy operation, insulation tests and giving satisfactory test and trial complete. 64 Servicing of OLTC by checking operating mechanism, alignment, applying jelly to various parts, checking of control panel operations and replacement of provided indicators, switches, control fuses, hardware, insulator, gasket, polishing contacts, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete.
Contract Date: Jun 10, 2026 Contract Value : ₹ 94.40 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
Chhattisgarh View Result →
27.
Health and Family Welfare #11237972 AOC
Tender for Lab Reagents And Oter Lab Items , Antihuman Globulin , Anti-Sera Abd , Aso Test , Blood Collection Bag , Blood Collection Bag , Blue Tips , Yellow Tips , Capillary Tubes , Cover Slip , Crp Test , Distilled Water , Esr Tube Set Disposable , Glass Marking Pencil , Glass Slide , Glycerine , Hb Estimation Card , Hb Pipette 20 Micros , Hepatitis B Card , Hepatitis C Card , Hiv Tridot Kit/Triline , Hydrogen Peroxide 30% , Jsb - L Stain , Jsb - 2 Stain , K 3 Edta Blood Collection Vial 5 Ml Tube (Double Cap) , Labopol , Lancet , LugolS Iodine , Malaria Card Test , Methanol , Microprotein , Multistix 10 Parameters , N/10 Hcl , Parafin Oil , Ra Factor Test , Sodium Hydrochloride 10% , Strip For Acetone Detection In Urine , Sulphur Powder , Test Tube Glass 10X100 Mm , Test Tube Glass 12X100mm , Sahils Hb Tube Round , Test-Tube Glass 12X80 Mm , Test Tube Plastic 12X100 Mm , Tissue Paper Roll , Typhoid Test , Urine Pregnancy Test Card , Uristix (Alb+Sug) Strip , Vdrl Test Strip , Widal Test , Xylene , Hb Meter (Square Bottom) , Hbtube (Square Bottom) , Filter Paper , Hiv Kit For Elisa , Hbsag Kit For Elisa , Vdrl Kit For Elisa , Dengue Kit For Elisa Lgm Sd , Micro Pipette 0-100 Micro. It. , Micro Pipette 100-100 Micro. It. , Micro Pipette 5 Micro. It.(Fix) , Micro Pipette 10 Micro. It.(Fix) , Micro Pipette 500 Micro. It.(Fix) , Staining Jar , Scrub Typhus Rapid Test Kit , Scrub Typhus Elisa Kit , Chikungunya Rapid Test Kit , Chikungunya Elisa Kit , Plastic Container For Urine Sample Collection , Dengue Ns 1 Lgg & Lgm Detection Rapid Test , Slide Dry Rack , Blood Bag Triple , Plastic Test Tube Rack , Timer , Microscope Blub 6V 20Wgu (Low Voltage Halogen Lamp) , Abx Diluent Mini (Horiba 3 Part Hematology Analyzer) , Abx Lyse Bio (Horiba 3 Part Hematology Analyzer) , Abx Cleaner (Horiba 3 Part Hematology Analyzer) , Abx Minoclair (Horiba 3 Part Hematology Analyzer) , Horiba 3 Part Hematology Analyzer Control Regents , Fluid Pack , Daily Rinse Kit , Electrode , B.Sugar , B.Urea , S.Albumin , S. Alk.Phosphatase , S.Amylase , S.Bilirubin , S.Calcium , S.Cholesterol,Liquid Form , S.Creatinine , S.Hdl Cholesterol , S.Hdl Cholesterol,Direct Method , S. Ldh , S.Triglyceride,Liquid Form , S.Uric Acid , Sgot,Liquid Form , Sgot,Liquid Form , Total Protein , Ck-Nac , Ck-Mb , Sodium Citrate Collection Vial (3.2%) , Uniplastin Regent , Sprit , Diamond Marker , Carbol Fuchsin , H2so4 25% , Methylene Blue , Bamboo Sticks , Blood Sugar Strips , Blood Sugar Meter Machine , Immersion Oil , Usg Paper Roll (Esaote My Lab 40 With Ehd) , Usg Paper Roll (Wipro Ge Versana Essential) , Ecg Roll),Contec , Ecg Roll (Comen 1200A) 12 Channel , Ecg Roll Bpl Single Channel , Ecg Gelly , Bp Instrument(Mercurial) , Bp Monitor (Digital) , Needle Holder , Edta Vacutainer Vial , Vacutainer Plain , Vacutainer Needle , Cbc Roll (For Horiba 3 Part Machine 57X10 ) , Semi Auto Analyser Printing Roll For Stat Fax 300 A , Plain Vial (Red Cap) , Hemocue Hb 201 Strips , Albumin. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Amylase. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Alkaline Phosphatase. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Alat (Gpt). For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Asat(Got). For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Bilirubin Total. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Bilirubin Direct. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Calcium (A). For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Creatinine. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Creatine Kinase Nac. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Creatine Kinase Mb. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Cholesterol. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Hdl Cholesterol (Direct). For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Chloride. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Ldl Cholesterol (Direct). For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , G-Glutamyl Transferase. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Glucose. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Lactatedehydrogenase. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Magnesium. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Phosphorus. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Total Proτειν. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Microprotτειν. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Triglyceride. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Uric Acid. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Urea. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Micro Albumin. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Crp. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Lipase. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Hba1c. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Aso. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Rf. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Reaction Cuvette. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Sample Cup. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Bio Norm(Quallity Contorl Normal. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Bio Path(Quallity Contorl Normal. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Bio Cel Multi Celibator. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Autoquant Cleanzer(Wash Solution). For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Halogen Lamp. For Meril Auto Quant 200 Excellus (Fully Automated Analyser ) , Bf-Fbh Lyse For Hematology Analyzer (Cbc) Merilyzer | Celquant 5 Plus™ , Bf-Fdo I Lyse For Hematology Analyzer (Cbc) Merilyzer | Celquant 5 Plus™ , Bf-Fdt I Lyse For Hematology Analyzer (Cbc) Merilyzer | Celquant 5 Plus™ , Blood Diluent For Hematology Analyzer (Cbc) Merilyzer | Celquant 5 Plus™ , Detergent For Hematology Analyzer (Cbc) Merilyzer | Celquant 5 Plus™ , Control High For Hematology Analyzer (Cbc) Merilyzer | Celquant 5 Plus™ , Control Low For Hematology Analyzer (Cbc) Merilyzer | Celquant 5 Plus™ , Control Normal For Hematology Analyzer (Cbc) Merilyzer | Celquant 5 Plus™
Contract Date: Jun 12, 2026 Contract Value : ₹ 48.00 Lakh
Government Departments No of Bidders 4
Rajasthan View Result →
28.
Railways #11219613 AOC
Supply Of Microprocessor Based Electro Pneumatic Contactor (Epc) Test Bench Modular Type With Large Lcd 20 X 4 (8/5 Matrix) Customised 4X3 Keypad With Keys Name Printed, Built In Sb/Rs/232 Portmicroprocessor Based Electro Pneumatic Contactor (Epc) Test Bench Modular Type With Large Lcd 20 X 4 (8/5 Matrix) Customised 4X3 Keypad With Keys Name Printed, Built In Sb/Rs/232 Port,Supply, Installation And Commissioning. Microprocessor Based Electro Pneumatic Contactor ( Epc) Test Bench Modular Type With Large Lcd 20 X 4 (8/5 Matrix) Customised 4X3 Keypad With Keys Name Printed, Built In Sb/Rs/232 Port. The Test Bench Should Parameter As Per Enclosed Annexure, [ Warranty P Eriod: 30 Months After The Date Of Delivery ] ]
Contract Date: Jun 04, 2026 Contract Value : ₹ 6.72 Lakh
Government Departments No of Bidders 1
West Bengal View Result →
29.
Defence #11213484 AOC
Tender For Repair And Maintenance Of Pumpsets, Submersible Pumpsets, Misc Works, Cleaning And Disnfecting Ug Sumps, Oh Reservoirs At 2Wing And 9Brd Afs Pune Under Ge (Af) Lohegaon.; 1 Taking out the submersible pump/Openwell Submersible Pump set forrepairsand lowering down after repairs the submersible pump set of any capacity& of any type from the bore well to a depth of not exc. 70 mtrs including scrapping of the existingpaint of submersible pump set and applying two coats of anti corrosive paint over a coat of primer complete after repair / replacement of spares and commisssioning all as directed by Engr-in-Charge.NOTE: COST OF REPAIR SHALL BE MEASURED AND PAID AGAINST RELEVANT ITEM 2 Repairs to submersible Pump set of electric driven of any type make and capacity upto 5 HP incl rewinding of the motor with same gauge and weightof PVC insulated copper conductor incl renewal of thrust plate,CI bowl,pump shaft,impeller ,Bearing,strainer,bush cable gaurd etc. reassembling, testing and commissioningcomplete all as directed by Engr-in-Charge. 3 Repairs toNon clog ,Open well submersible Pump set of electric driven of any type make and capacity upto 5 HP incl rewinding of the motor with same gauge and weightof PVC insulated copper conductor incl renewal of Mechanical seal, Bearing ,thrust plate,CI bowl,pump shaft,impeller ,strainer,bush cable gaurd etc. reassembling, testing and commissioningcomplete all as directed by Engr-in-Charge. 4 Renewal of column pipe 50 mm dia heavy duty ISI marked ,10 feet lengthboth ends machine threaded with longthread heavy duty socket complete all as directed by Engr-in-Charge. 5 Replacement of unserviceablePVC weather proof cable and replacementwithnewPVC weather proofcopper cable for size3 core2.5 sqmm suitable for submersible pump set complete all as directed by Engr-in-Charge. 6 Replace of non return valve gun metal 50 mm bore complete all as directed by Engr-in-Charge. 7 Replace of non return valve gun metal 150 mm bore complete all as directed by Engr-in-Charge. 8 Taking outold unserviceable MCCB 400/360 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,400 Ampsall as directed. 9 Taking outold unserviceable MCCB 250 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,250 Ampsall as directed. 10 Taking outold unserviceable MCCB 200 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,200 Ampsall as directed. 11 Taking outold unserviceable MCCB 160 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,160 Amps. 12 Taking outold unserviceable MCCB 100 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,100 Amps. 13 Taking outold unserviceable MCCB 63 Amps and replacing the same with new MCCB 415 V,25 KA ,4 Pole ,63 Amps. 14 Material and labour for reparing/maintenance of existing electrical panel boards of pump sets by replaing worn out spares as starter/single phase preventor/relay /contactors MCCBs / MCBs / switch gear / cable glands/ lugs pin type,U type etc, cleaning of panel board, tightening of cable connection to avoid sparking, insulating bus bars bracket portion of conductor and to ensuring proper function of the panel board all as directed by Eng-in-Charge.NOTE: ( I ) Cost of spares as starter /single phase preventor/voltmeter/Amp meter/ relay / contactor /MCCBs/ MCBs / Switch gear / cable gland etc shall be measuredand paid against relevant item.(ii) Cost of lugs (pin type / U Type) ,insulation taps shall be included in quoted rate.(iii) Cost of fixing of spares shall deemed to be included in quoted rate. 15 Renewals/replacingthe followingspares to the existing elecrical panels complete all as directed by Engr-in-Charge. 16 S& F Voltmeter/Ammeter ,3 phase for range 0-200A Class-I, suitable as per existing 17 S&F in replacement of old unserviceable contactor ofcapacity upto 45 A,power operating voltage 415 V AC Capacity 3 pole with AC coil etc, suitable for existing contactor 18 S&F in replacement of old unserviceable contactor ofcapacity upto 95 A,power operating voltage 415 V AC Capacity 3 pole with AC coil etc, suitable for existing contactor 19 S&F in replacement of old unserviceable contactor ofcapacity upto 110/120 A,power operating voltage 415 V AC Capacity 3 pole with AC coil etc, suitable for existing contatctor 20 Over load relay 3 phase 415 Volts with range 16 to 45 A suitable for existing 21 Over load 3 phase 415 Volts relay with range 45 to 88 A suitable for existing 22 S& F Single phase preventor including Timer,415 V suitable for 100 HP motor. 23 Dismantling the centrifugal Pump/monoblock pumpset with motor of capacity Upto 3HP including disconnecting suction and delivery, power supply cable etc and reassembling same after replacement of necessary spares including greasing and painting of 2 coats of synthetic enamel paint using spray machine complete and replacing the same and testing all as specified and as directed by Engr in charge.NOTE: 1.In case of Centrifugal pump dismantling of pump and motor will be paid seperatly.2. In case of Monoblock pumpset pump/motor paid as one3. Spares such as bearing, bush, gland packing, coupling, capacitor will be measured & paid seperately 24 All as per item no 16 but for the capacity of 5 HP to 7.5 HP 25 All as per item no 16 but for the capacity of 10 HP to 15 HP 26 All as per item no 16 but for the capacity of 20 HP to 30 HP 27 All as per item no 16 but for the capacity of 40HP to 50HP. 28 All as per item no 16 but for the capacity of 60HP to 75 HP 29 All as per item no 16 but for the capacity of 90HP to 100HP 30 Supply only following worn out spares of Centrifugal/monoblock pump sets. 31 Bearing as per existing Size suitable for up to 3HP motor 32 Bearing as per existing Size suitable for 5HP to 7.5 HP motor 33 Bearing as per existing Size suitable for 10 HP to 12.5 HP motor 34 Bearing as per existing Size suitable for 20 HP to 30HP motor 35 Bearing as per existing Size suitable for 40HP to 50 HP motor 36 Bearing as per existing Size suitable for 60HP motor 37 Bearing as per existing Size suitable for 75 HP motor 38 Bearing as per existing Size suitable for 90 HP motor 39 Bearing as per existing Size suitable for 100 HP motor 40 Rubber bush/star rubber for coupling as per existing size for upto 30 HP motor 41 Rubber bush/star rubberfor coupling as per existing size forupto 50HP motor 42 Rubber bush/star rubber for coupling as per existing size forupto 75 HP motor 43 Rubber bush/star rubber for coupling as per existing size for upto90 HP motor 44 Rubber bush/star rubber for coupling as per existing size for upto 100 HP motor 45 Gland packingupto30 HP pump 46 Gland packing for 40 HP motor 47 Gland packing for 50 HP motor 48 Gland packing for 60 HP motor 49 Gland packing for 75 HP motor 50 Gland packing for 90 HP motor 51 Gland packing for 100 HP motor 52 Supply and replace old worn out couling with new Tyre coupling including machining,suitable to shaft dia of pump and motor of 5HP,12.5HP,20HP 53 Supply and replace old worn out couling with new Tyre coupling including machining,suitable to shaft dia of pump and motor of 30HP,40HP,50HP 54 Supply and replace old worn out couling with new Tyre coupling including machining,suitable to shaft dia of pump and motor of 60HP,75HP,90HP,100HP 55 Overhauling/servicing of Suction sweeper assembly trolley mounted with mud pump motor head 11.5 mtr make; Kirloskar for swimming pool complete all as specified and directer by Engr-in-charge. Notes:- including spares require for making the assembly serviceable deemed to be included in subjected item. 56 M & L for Rewinding ofelectric motor 3 phase, 415 Volt capacity 1/2HP TO 3 HP, incoming disconnection electric connections, dismantling slots, taking out burnt windings and rewinding the motor with super enameled copper wire as per existing size including insulating material and varnishing,greasing, painting with super enameled paint as per colour coad assembling the motor after rewinding and mounting at its ownposition, replacing the old nut,bolts and testing all as directed. 57 All as per item no. 28 but for the capacity of 5HP. 58 All as per item no. 28 but for the capacity of 10HP,12.5HP 59 All as per item no. 28 but for the capacity of 15HP,20HP. 60 All as per item no. 28 but for the capacity of 30HP. 61 All as per item no. 28 but for the capacity of 40HP 62 All as per item no. 28 but for the capacity of 50HP 63 All as per item no. 28 but for the capacity of 60HP. 64 All as per item no. 28 but for the capacity of 75HP. 65 All as per item no. 28 but for the capacity of 90HP. 66 All as per item no. 28 but for the capacity of 100HP. 67 Taking out unserviceable foot valve 80 mm dia from the UG sump and S & F new foot valve 80 mm dia ball typeincl rubbergasket, bolts, buts complete all as directed. 68 Taking out unserviceable foot valve 100 mm dia from the UG sump and S & F new foot valve 100mm dia ball typeincl rubbergasket, bolts, buts complete all as directed. 69 Taking out unserviceable foot valve 150 mm dia from the UG sump and S & F new foot valve 150mm dia ball typeincl rubbergasket, bolts, buts complete all as directed. 70 Supply and fix spares for pumps of DSM 150/45, DSM 100/36, DSM 125/45, DBHS 71 a) Impeller 1st , II nd Stage 72 b) Pump Shaft 73 c) Shaft sleave 74 d) Cartrige bearing DE/NDE 75 e) Through bush 76 f) Split gland coupling 77 g) Wear ring 78 h) Lantern Ring 79 h) Gland coupling 80 Supply and replacing Automatic DOL starter suitable up to5 HP submersible/ centrifugal pump set 81 Supply and replacing Automatic star Delta starter suitable 7.5 HP to 12.5 HP submersible/ centrifugal pump set 82 Replacement of nuts bolts to top & bottom cover of DSM pump 100 HP, 90 HP, 75 HP. 83 Supply & fixing in replacement LT cable 1100 volts grade PVC insulated multistranded copper conductor cable single core of size 35 sqmm. 84 M&L for cleaning and sterilization of inside the RCC/ Steel Underground/semi underground/Over head/Sedmentation/clear water sumpsof capacity.(a). First Stage is to drain out the water by using exit valve or high capacity dewatering system. (b). Second stage is cleaning all the algae formation inside the tank .(c). Third strage is fresh water cleaning by high speed jet pump.(d). Fourth stage and first bacteria screening is decertification.(e). Fifth stage is cleaning the floor of water tank by industrial vaccum cleaner. (f) . Sixth stage is the second bacterio screening and sterilizing method by using ultra violet ray within the tnk and kills all suspended bacteria. (g)Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent. NOTE:-(i) COMPANY WILL SUBMIT LABORATORY TEST CERTIFICATE OF CHEMICAL USED BEFORE CLEANING, FIX THE STICKER MENTIONING THE DATE OF CLEANING & NAME OF SITE AND ALSO PROVIDE CERTIFICATE CONFIRMING THE COMPLETION OF STERILIZATION OF WATER TANKS MENTIONING THE NAME OF STATION AND DATE OF CLEANING. ALL THE CLEANING & STERILIZATION STAFFS SHOULD BE UNDER ACCIDENTAL INSURANCE COVERAGE. (ii) OUTLET PIPE OF OHT SHOULD BE PLUGGED BEFORE CLEANING THE OHT TO AVOID.ENTERING SCALS AND THE SAME SHELL BE RECONNECTED AFTER CLEANING THE OHT AND THE QUOTED RATE IS DEEMED TO INCLUDE FOR THE ROVISION . (III) STERILIZATION TEAM WILL BE COMPRISED OF AT LEAST 30% MEMBERS WHO ARE MINIMUM03 MONTHS CERTIFICATE HOLDER IN WATER TANKS STERILIZATION. (IV) CONTRACTOR WILL BE RESPONSIBLE FOR RECTIFICATION OF COMPLAINTS OCCURRED DURING CLEANING THE TANK IE. NO WATER IN TANK/OVER FLOW DUE TO BROKEN OF FLOAT VALVE/ BLOCKAGE TO BE INCLUDED IN QUOTED RATE. NOTE:-THE WORK SHALL BE CARRIED THROUGH SPECILIZED AGENCY. 85 a)All as per Item no. 50 but for UG sump 100000 gallons capacity 86 b) All as per Item no. 50 but for UG sump10,000 gallons capacity 87 c)All as per Item no. 50 but for UG sump50000/30000 gallons capacity 88 d)All as per Item no. 50 but for O H Reservoir 300000 glns capacity 89 e)All as per Item no. 50 but for O H Reservoir 50000 glns capacity 90 f)All as per Item no. 50 but for O H Reservoir 150000 glns capacity 91 g)All as per Item no. 50 but for O H Reservoir 10000 glns capacity 92 h)All as per Item no. 50 but for O H Reservoir 25000 glns capacity 93 Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity up to 10000 Glns complete all as specified and directed by Engr-in-charge 94 Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity 10001 to 15000 Glns complete all as specified and directed by Engr-in-charge 95 Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity 15001 to25000 Glns complete all as specified and directed by Engr-in-charge 96 Cleaning fire static tank for fire fighting system drain out of water and taking out the sludges from the bottom ofthe static tank and clean surface by scraping and two coats of white cement washof capacity 50000 Glns complete all as specified and directed by Engr-in-charge 97 S&F spare parts of chlorine dozers at various loaction as per directed by Engineer in charge 98 a) Pump head (ferrules 1/4 & duckbill included) 99 b) Pump Tube (pack of 5) 100 c) Injection cheack valve 3/8 101 d) 3/8 white suction/discharge tubing 102 e) Check valve duck bill only (pack of 5) 103 f) Connecting nut 3/8 104 g) Connecting nut 3/8 with adapter(pack of 5) 105 h) Ferrule 1/4 (pack of 24) 106 Supply and fix XLPE insulated, armoured heavy duty electric cable withn aluminium conductor, 1100 volts grade, cross-sectional area 95 sq. mm,3.5 core as per direction of Engineer in charge 107 Supply and fix wall mounted metal enclosure consist of On load change over of capacity 250 Amps 415V, 4 pole to be installed as per the direction of Engineer in charge 108 Supply and fix wall mounted metal enclosure consist of On load change over of capacity 400 Amps 415V, 4 pole to be installed as per the direction of Engineer in charge 109 Supply only drinking water testing Kit having testing water parameter like PPM of chlorine,PH etc . 110 Supply only O tolidine reagent for testing of chlorine content in drinking water as per direction of engineer in charge. 111 Supply only swimming pool water clarifier as per direction of Engineer in charge 112 M & L for installation of sign board made of 3mm ACP sheet pasted on Recto Reflective Sign Board ncluding Frame working, SS Steel, fitting & Concreting work complete all as per direction and approval of Engineer in charge (Notes :- Matter/colour to be printed shall be provided by Deptt) 113 Material & Labour for painting of Pumps inlcuding motor, suction & Discharge Pipes of capacity upto 12.5 HP 114 Material & Labour for painting of Pumps inlcuding motor, suction & Discharge Pipes of capacity upto 50 HP 115 Material & Labour for painting of Pumps inlcuding motor, suction & Discharge Pipes of capacity upto 100 HP
Contract Date: Jan 09, 2026 Contract Value : ₹ 15.52 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Maharashtra View Result →
30.
Defence #11203241 AOC
Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - Aiamc Of Ground Support Equipments And Tools For 842Sqn Cg; Tools And Gse; Annual Maintenance Contract (Amc); Daily; Yes; (a) Daily maintenance as specified in the user manual of equipment. In addition: - (i) Checking and refilling of tyre pressure as specified. (ii) Checking level of coolant and toping up as required. (iii) Checking for smooth movement of wheel and Greasing as required. (iv) Maintaining cleanliness of GSE as part of daily parade. (v) Corrosion removal and application of anticorrosive treatment and paint touch up. (vi) Operational checks of GSE. (vii) Checking and refilling of lubricant as required. (viii) Functional check of all equipment for performance. (b) Monthly inspection as specified in the user manual of equipment. In addition: - (i) Cleaning the filters and replace if required. (ii) Checking of condition of flexible hoses and replace if required. (iii) Checking for correct N2 pressure of nitrogen bottles and top up if required. (iv) Lubrication of GSE as applicable. (v) All ladder’s padding/beading to be replaced as and when found deteriorated (vi) Routine maintenance of trolley fitted on GSE for its test performance. (c) Quarterly inspection as specified in the user manual of equipment. In addition: - (i) Checking the condition of rubber beeding and replace if required. (ii) Checking the condition of safety pin / nuts / bolts and replaced if required. (iii) Replacement of chaffing/damages/deteriorated hoses. (iv) Operation checking of nozzles sprayer, replace if required. (v) Corrosion removal and application of anticorrosive as applicable. (vi) Checking of condition of inner sponge of all wooden stands and replace if required. (vii) Acidity test of hydraulic fluid (with sample bottle qty-12). (d) Half Yearly inspection as specified in the user manual of equipment. In addition: (i) Dismantle and cleaning the equipment which ever applicable viz. Compressor washing rig, Hydraulic test rig etc. (ii) Six monthly filter cleaning (replace if required) of defueling pump and other applicable equipment. (e) Yearly inspection as specified in the user manual of equipment. In addition: - (i) Painting of all GSE and when directed by GSE In-charge time to time. The contractor will use paint at their cost. (ii) Calibration of all gauges of GSE/Tools when due. (iii) HST of equipment to be undertaken when due during period of contract. (iv) Calibration of instruments, pressure gauges and pressure relief valve of all equipment to be carried out by the contractor undertaking AIAMC as per the schedule held with the Coast Guard. 2. Preventive Maintenance :- The contractor is to maintain system as per preventive maintenance schedule to ensure all equipment are in serviceable state throughout the AIAMC period. The preventive maintenance will include the following :- (i) Replacement of components liable to become unserviceable shortly. (ii) Lubrication of rotary components. (iii) Vibration checks/adjustments. (iv) Corrosion removal, cleaning and prevention. (v) Painting of all equipment on requirement basis. (vi) Blowing out and surface cleaning of all units once in a week basis to remove dust. (vii) Replacement of cable sleeve when wear and tear occurs. (viii) Adjustment of parameters when observed beyond limits or below the required value
Contract Date: Ref. Documents Contract Value : ₹ 7.96 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
31.
Defence #11201644 AOC
Bids Are invited for Soil Investigation and sampling - To carry out soil investigation and collection of samples in all types of strata including distrubed, undistrubed soil sampling, conduction of Standard Penetration Test (SPT), visual classification at regular interval, determine the safe bearing capacity complete with field and laboratory tests on soil/ rock samples including trail pit 1.20m x 1.20m x 3.0m investigation to relevant specification of IS 2131, IS 6403, IS 1498 IS 2720 , Borehole Drilling and SBC analysis - Conducting Soil Investigation for the following - (a) 150mm dia meter bore holes as per IS specification (b) Bore Hole. (i) Depth of Bore Hole 15.00 Mtr (Core drilling by Calyx Rig) (ii) To suggest SBC for isolated footing 1.5x1.5, 2.0x2.0, 2.5x2.5 mtr at 1.5m, 2.0m, 2.5m depth strip depth strip footing of 1.5 2.0 mtr. (iii) Water Table (iv) Expansive nature of soil with respect plasticity index (v) N Value at 2.5m, 3.0m, 6.0m, 12.0m (vi) Bore log of soil strata upto 15.0 mtr depth , Soil Laboratory Testing physical - (c) Collection of distrubed and undistrubed soil sample at interval of 1.00 mtr at change of relevant specification of IS 2720. , Soil Chemical Analysis - (d) Conduction Lab test on distrubed soil sample at interval of 1.00 mtr or at change of strata or as per relevant IS Code. (i) Sieve analysis (ii) Atterbergs limits (iii) Natural moisture content (iv) Particle size analysis test (v) Bulk density , Soil Engineering Properties test - (e) Conducting Lab test on undistrubed soil sample as considered necessary according to relevant specification of IS 2720 - (i) Sieve analysis (ii) Atterbergs limits (iii) Natural moisture content (iv) Particle size analysis test (v) Bulk density (vi) Specific gravity (vii) Free swell index and swelling property of soil (viii) Organic matter in any soil, in any (ix) Consolidation test (Compressed index value) (x) Trixial compression test and determination of shear parameters (C O) test as per relevant IS. (xi) Harful salt (Complete investigation as already ref). , Water level Test - (f) Ground Water Table - (i) Maximum and minimum levels of Ground Water in the area with sources of information. (ii) Ground water table during investigation. , Comprehensive Soil Report and SBC - (g) Submission of Six copies of test reports with detailed description of field investigation, soil classification and general nature of soil strata, water table, interpretation of test results, grains size, distribution curves, compressive index curves, site plan etc. (h) The SBC of the soil is required to be given as per following table. Calculation of bearing capacity will be governed generally as per IS 8009 (Pt-I) 1976, IS-2720 (Pt-II) 1980, IS 6403-1981, IS 1904-1984 IS 1904-1984 and IS 1080-1985 and other relevant IS code. , Foundation Mapping - (j) With every sites Soil Investigation Report, a detailed site plan showing the approx location of each bore duly numbered as per log of bore hole should be enclosed. Location of foundation of adjacent structures, especially those that might be impacted by the proposed construction. (k) Every page of the soil investigation report should have the Name of the Job for which soil investigation is being carried out. In case of multiple sites of a single job are being investigated name of each site shall be put on each page of report pertaining to the site. , mobilization and Final certification - (l) All pages of the Soil Investigation Report shall be serially numbered, stamped and signed by the Agency carrying out the soil investigation. Report should be scrutinised by GE and CWE for correctness and endorse. (m) Mobilisation of tools and equipments, machineries, manpowers etc to site location and demolition from site after completion of work. Total Quantity : 18
Contract Date: Ref. Documents Contract Value : ₹ 1.15 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Haryana View Result →
32.
Defence #11192596 AOC
Tender For Provn Of Central Mi Room At Nimu; 1 Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 43 2 Lump sum price worked out by the contractor for (SITE CLEARANCE, EXCAVATION & EARTH WORK)as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 44 3 Lump sum price worked out by the contractor for (INTERNAL ELECTRIFICATION)as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 50 4 Lump sum price worked out by the contractor for (INTERNAL WATER SUPPLY)as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 52 5 Lump sum price worked out by the contractor for (ROAD, PATH & HARDSTANDING)as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 54 6 Lump sum price worked out by the contractor for (SEWAGE DISPOSAL)as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 55 7 Lump sum price worked out by the contractor for (AREA DRAINAGE)as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 56 8 Lump sum price worked out by the contractor for (SHED FOR DG SET)as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 58 9 Lump sum price worked out by the contractor for (HOT WATER SUPPLY)as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 59 10 Lump sum price worked out by the contractor for (EXTERNAL ELECTRIFICATION)as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 65 11 Lump sum price worked out by the contractor for (EXTERNAL WATER SUPPLY)as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 66 12 SCH A PART - XII (MISC B/R & E/M ITEMS) (REFER BOQ)Note: This schedule is not pre-priced by MES and the rate indicated as Rs 0.00 under Col 5 signifies this fact only 13 INTERNAL ELECTRIFICATIONS&F Double door three phase prewired distribution board vertical DB VTPN 8 way with acrylic door made out of CRCA sheets 1.6 mm thick,phosphatised powder coated with copper Bus Bar 200 Amps, 415 V,IP 43/IK09, Earth Stud, Din Rail, Polymide terminal blocks for incoming and outgoing circuits, inbuilt loose wire box ,ground terminal blocks ,duly prewired with thimbled flame retardant copper conductors and poly layer for protection in and includingMCCB4 pole 63 Amp rating repturing capacity 16 KA.(Note:- Single Phase MCBs are to be measured and paid for seperately) 14 S&F LED building security light, pressure die cast aluminum housing, 20/25 watts capacity, 240V, IP 65 class, with suitable in-built electronic driver complete incld. fixed on a bracket made out of 1.5 mtr long Med grade GI pipe 40 mm dia bend to shape as directed fitted on wall at a height not less than 5 mtr from groundwith MS clamp, nuts and bolts and washers as required at site and incld. connecting luminarie to the nearest ceiling rose/junction box with 1.5 sqmm PVC insulated 3 core wire complete all as directed and specified by Engr-in-Charge.NOTE - Cost of all minor spares and jobs required for fixing of light fixture on wall and for electrical connections are deemed to be included in the quoted rate. 15 S&F new wall mounted fan of approved make and type complete all as specified and as directed. 16 S&F TV Co-axial socket 1 module, complete all as specified and as directed. 17 S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps 18 INTERNAL WATER SUPPLYS&F single piece Vitreous china wash down water closet pan Pedestal Pattern white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flushing system , pipe and joint etc and connection to drain, flushing, pipe, anti-syphonage pipe, and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, as in repairs complete all as spd & directed complete all as specified and directed by Engr-in charge.. 19 S&F CP Grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) dia of outlet is 100 mm complete all as specified and directed by Engr-in charge. 20 S&F hand shower (health faucet ) with 8mm dia and 1 meter long CP flexible tube and wall hookcomplete all as specified Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge 21 S&F Soap dish (S/S), any type, fixed to plugs with chromium plated brass screws, all as specified and directed by Engr-in charge. 22 ROAD, PATH & HARD STANDINGM&L for wet mix macadam (WMM) for 150mm thick (compacted thickness) laid in two layers of 75mm each grading as per table 400-13 of MoRTH (Ministry of Road Transport & Highways) specification of Road and Bridge works 2013. Manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and conslidating required gradient and camber. The finished surface tolerance to be as per table 900-1 of MoRTH specification for road and bridge works 2013 complete all as specified and directed by Engr-in-Charge. 23 M&L for applying thermoplastic paint marking 2.5mm thick centerline ,stop line,dashes,arrows etc and n exc 10cm wide on roads pavements with hot applied thermoplastic road marking paint ofapproved colour confirming to BS 3262-1989 with special applicater machine all as per manufacturers instructionof any colour on road surfaceincluding cleaning with gunny bags removing all loose dirt/dust complete all as specified and directed. 24 M&L for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc, complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 users. 25 M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3M Dia and 3 M Depth. 26 EXTERNAL ELECTRIC SUPPLYS&F Polycarbonate junction boxes IP 65 protection of size 0.200 x 0.250 x 0.155 m complete with 1 Nos MCB SP 2.5 Amp & 4 way industrial connector including clamp made out of MS flat 30x5mm connection from junction box to street light fitting with three single core PVC insulated, PVC sheathed wire 2.5 Sqmm copper & PVC conduit 20 mm dia complete all as specified and directed by Engr-in-charge. 27 Excavation in trenches by cutting of road crossing/PCC hard standing, under boundary wallfor laying of pipe/cable including making good the existing surface with same finish to match the original finish complete all as specified and directed by Engr-in-charge. 28 S&FHT/LT MS cable route indicator 4 dia fixed with two Nos of nut, bolt and washers and provision of PCC 1 : 4 : 8 type D-2 using 40 mm grade stone aggregate of not less than 0.018 cum in each at base buried under the groundincl necessary earth work complete all as specified and directed by Engr-in-charge. 29 Supply, installation, testing and commissinoning LT panel board suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz indoortype, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation factory fabricated made out of 2 mm thick CRCA sheetduly powder coated and shall be CPRI Approved and as approved by GE. The Panel shall have front and rear opening, locking arrangement, cable alleys, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, glands, AI bus bar duly covered with heat shrink sleeves colour coaded duly fixed onDMC/SMC insulators, housed in a separate bus bar chamber and control wiring with copper conductor cables of adequate size and length, incoming and outgoing MCCBs shall have extended bus bar links and mounted on 50x50x5mm sizeMS angle iron frame duly painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate ) in foundation design subject to approved of AGE (I) Nimu to sent the site requirementcomplete all as specified and directed including comprising of following :- 30 (a) MCCB 400 Amps, FP, 36 KA, 415 volts, 50Hz - 01 No (I/C)(b) MCCB 200 Amps, FP, 25 KA, 415 volts, 50Hz - 02 No ( CHS)(c) MCCB 125 Amps, FP, 16 KA, 415 volts, 50Hz - 04 Nos (APFC, TPN DB -02, Spare )(d) MCB SPN 40 Amps, 10 KA, 220 volts, 50Hz - 03 Nos (Garage,Street light, Spare-1)(e) On load Chengeover 400 Amps 4 pole -01 No (f)Digital voltmeter, with VSS - 01set(g) Digital Ammeter, with CTs & ASS - 01 set(h) LED phase indication lamps RYB - 01 set(j)Single phase Rotary Automatic Light controller Nature switch with voltage range 120-440V,AC,20 Amps,IP-65,50HZ-01 Nos(k) Copper bus bar TPN 600 Amps rating - 01 set 31 Labour for boring underground upto 100 mm bore for road crossing 3 mtr to 10 mtr not exceeding 1.5 mtr in depth for laying of electric cable and GI tubing in soft/loose soil complete all as specified. 32 EXTERNAL WATER SUPPLYM&Lfor cutting existing GI pipes and insertion of new Tee branches of suitable size to take branch connection of 50mm dia PP-R.Note : Suitable size of Tee branch is deemed to be included in the quoted rate. 33 Construction of stone masonary valve pit chamber of size 90cm x 90 cm x 90 cm (internal dimension) including all necessary excavation and earthwork in hard / dense soil and disposal of surplus soil to a distance not exceeding 50 meters & deposting the same as directed includingPCC in foundation of the mixture (1:4:8) D-2 stone masonary in cement motor 1:4 rendering 15mm thick in cement mortar 1:4 internally finished even and fair and pointing flush externally as the work proceeds in the same mortar as of stone masonary including mild steelframe (made out ofangle in 40x40x6mm) MS steel cover 3.15 mm thick with handle and locking arrangement with ginges angle iron flat as requiredat site including painting of all posed MS work with two coat of synthetic enamel paint over a coat of red oxide primer and painting all the steel surfaces embedded in PCC with two coats of black bituminuos paint andall other relevant work complete . 34 M&L for providing tracer/anti freezing cable of capacity 20W/m required to keep the pipe warm upto avoiding freezing all as specified including electrical wiring cable for connection of suitable size 35 (CENTRAL HEATING SYSTEM)Electric Hot Water Generator : Supply, installation, testing and commissioning ofpackage type electric Hot Water generator constructed out of MS sheet having top open-able cover for easy access and removal of heaters. The HWG shall be suitable for indoor mounting. The generator shall be provided with 50mm thick fibre glass insulation 32 kg density finished with 0.8mm / 22G aluminium cladding sheet. The generator shall have electrical capacity of 50 kW. The heater shall be electrical resistance type, copper tube with chromium plating. The generator shall be complete with float valve, pressure gauge with ball valve, master and bank thermostats, etc. The generator shall be suitable for 3 phase, 415+ 10% Volts, 50 Hz. AC supply. The generator shall complete with self-contained incoming isolation, ammeter, voltmeter, contactors for heater banks in three steps complete with manual/auto rotary switches. 36 Notes:- (i) Allneccassary accessories required for the proper fucntioning of Hot Water Genearator are included in price.(ii) The prices should include lifting, shifting and positioning of units at Site.(iii) Hot Water Genearator installation to done as per Manufacturer recommendation with all installation requirements i.e Foundation, Vibration Isolator,Insulationetc as recommended by Manufacturer for the Ambient Temperature of Site. ODU installation is included in ODU price which includes the Civil Struture, Mechanical Structureetc as recommended byManufacturer.(iv) The Contractor/OEM will shall submit the Hot Water Generator capacity/Burner Capacity conforming to relevant IS Code(v) OEM should submit the Installation and Maintenance Schedule/ Manual for the Boiler. 37 GLYCOL CIRCULATION CENTRIFUGAL PUMPS: Supply, Installation, Testing & Commissioning of PN16 ratedAxial Split Coupled Vertical Inline water pump set with CI casing, Bronze Impeller, SS Shaft and externally flushed outside type balanced mechanical seal and non overloading motor, as per specifications and drawings. with Suitable HP, TEFC squirrel cage induction motor with IE3 type class F insulation, Motor shall be rating of IP 55, operating on 415 ±10% volts, 3 phase, 50Hz AC Supply. The external flush line must be used for the purpose of heat dissipation from the mechanical seal.Pumps with performance characteristics as given below:The internal components of pumps including mechanical seal shall be suitable to sustain a fluid temperature of -25 Degree Celcius to 120 Degree Celcius. Vendor shall be provide antivibration arrangement for pumps . 38 The scope also shall include following below mentioned:(i) Electrical by pass starter for pump setas recommended by OEM. (ii) 25 mm thick polyviny nitrile rubber insulation duly cladded between aluminium sheets of 0.5mm thickness and properly clamped to pump.(iii) Pressure gauges 150 mm dia -03 Nos (iv) Mounting frame with antivibration pads (In case pumps are inline, anti vibration system shall be as per Manufacturers recommendation) (v) RCC/Cement concrete foundation for the pump unit. (In case pumps are inline, foundation shall be as per Manufacturers recommendation).Pump capacity are as under:Capacityand pump headnot less than flow 25 USGPM , Head 20 mtr (Refernce Model No. : Armstrong : Series 4300 - 40-150 - 2p - 1.5 kW) each including the Triple duty valve and End Suction guide. 39 EXPANSION TANK and Pressurisation Unit:Supply, Installation, Testing and commissioning of INSULATED PRESSURISED CLOSED WATER EXPANSION TANK suitable for total volume ofGlycol - Water Solution, circuit along with necessary accessories such as along with necessary accessories such as 2 Nos pumps (1working +1standby) with Pressure Transmitter andinterconnecting Pipe & Isolating Valve complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc.with Pressure Transmitter andinterconnecting Pipe & Isolating Valve complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc. The tank shall be pre-charged. Expansion tank Shall be with replaceable heavy duty butyl rubber bladder. The tankconnections should be as per OEM recommendationsand 20 mm drain and charging valve connection to facilitate the on site charging of nitrogen in the tank.The tank shall be fitted with lifting rings and a floor mounting skirt for vertical installation. The tank must be constructed in accordance with IS-STANDARD 2825-1969 (withlates Revision)and Rated at PN 16 . The complete system shall be sourced from single manufacturer and supplied and installed with all accessories and safety fixtures required for proper functioning of the complete hydronic system.The tank shall be duly painted in approved colour shall be complete with pressure switches and power distribution and control panelIP55 Control Panel, Pressure Transmitter, interconnecting piping & wiring. (Tank capacity 500 Ltrs). Hot Glycol - Water closed vessel pressurized expansion tank as described above shall be duly Insulated with 50 mm thick PUF/Nitrile Rubber insulating material or Equivalent U valueInsulating Material and cladded with aluminium Sheet (20G). Electrical by pass starter for pump setas recommended by OEM. 40 Expansion Tank of 500 Lts capacity 41 PRESSURIZATION UNIT: for Pump Set -03 Nos with Control Panel and accessories. 42 Make Up TANK: Supply, installation, testing and commissioning of factory made Make up Water Tank, Rectangular/Circular shape, of 4 mm thick MS sheet (IS 2062), of capacity of 550 litres complete with inlet, outlet, overflow, drain pipe of MS and vent with flame arrestor. Tank will be provided with supports made out of minimum 50mm angle iron duly painted, to keep tank base at minimum (1000mm) above FFL. Service platform shall be provided as per recommendations of OEM. The tank shall be provided with remote indication of levels provided level switches for on-off operation of tranfer pump. Extra high level and extra low level alarm shall be provided. Tank and structure shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.Make up Water tank as describedabove should beduly Insulated with 50 mm thick PUF/Nitrile Rubber insulating material and cladded with aluminium Sheet (20G). 43 Supply, Installation, Testing and Commissioning ofSteel plate Radiator( Wall Mounted) confirming EN- 442 , working pressurerange from 10-13 bar having workinh temparture of 110°C, complete with top grill side cover as standard along with inlet ,outlet valve, Air purge valve andwith threaded plug, flow regulator as per OEM.The below desired capacity should be calculated at Altitude of 3600 mts above sea level. Capacity calculation sheet to be provided to Engineer in Charge. The below mentioned capacity is at INLET TEMP: 75 Degree Celcius , OUTLET TEMP: 65 Degree Celcius. Referemcwe Model Series. 44 1.5 kW, Type: 33- DKEK, Length is 1000 mm and Height is 600 mm of Radiator. 45 2.5 kW, Type: 33- DKEK, Length is 1000 mm and Height is 600 mm of Radiator. 46 3.5 kW,Type: 33- DKEK, Length is 1600 mm and Height is 600 mm of Radiator. 47 5 kW,Type: 33- DKEK, Length is 1600 mm and Height is 900 mm of Radiator. 48 5 kW,Type: 33- DKEK, Length is 2000 mm and Height is 600 mm of Radiator 49 M & L for Pre-insulated MS pipe,Class C havingminimum thicknes of PUF insulation as mentioned below and of density 36 Kg/Cum and 26 gauge AL cladding complete suitable for above ground as per sizes shown.The pipes should be insulated with closed cell puf of density 36±2 Kg/Cum of below mentioned thickness. The Pipe should be workable in the temp. range of-50 Degree Celciusto120 Degreec Celcius. Note:-The Pipes size 150mm & below shall be M.S. ‘C’ class as per IS : 1239 50 80 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 51 65 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 52 50 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 53 40 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 54 20 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 55 Buried under ground/Exposed to Ambient:80 mm with 50 mm PUF thicknes and HDPE Cladding, 26 Gauge Al Cladding. 56 Cabel Tray :-Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling/Ground/wall with M.S. suspenders as per IS code including bolts & nuts, painting suspenders etc. as required of size 150 mm width X 50 mm depth X 1.6 mm thickness 57 Supplying, fixing, testing and commissioning of following diameter valves (PN-16 Rating) (Complete with Flanges integral or welded, fittings, Nuts, Bolts & Gaskets (PN-16 Rating), strainers (Complete with flanges integral or welded, fittings, Nuts, Bolts & Gaskets (PN-16 Rating), gauges etc for condenser water circulation as per specifications. Insulation thickness ofvalves should be equal to the Insulation of PUF and GI Cladding of Pipe Section as specified. Butterfly Valve ( Insulated Valves) with CI body SS disc nitrile sheet & O ring, Complete with fittings, Nuts, Bolts & Gaskets.Butterfly Valve ( Insulated Valves) with CI body SS disc nitrile sheet & O ring, Complete with fittings, Nuts, Bolts & Gaskets. 58 80 mm dia Butterfly Valve 59 65 mm dia Butterfly Valve 60 50 mm dia Butterfly Valve 61 Supplying, fixing, testing and commissioning of Y-STRAINER (Insulated Valves) of Ductile CI Body flanged ends with stainless steel strainer forhot water circulation including Insulation thickness ofvalves should be equal to the Insulation of PUF and GI Cladding of Pipe Section as specified of size 50 mm dia Y strainer. 62 Supplying, fixing, testing and commissioning of NON - RETURN VALVE (Insulated Valves) with duel plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating forhot water circulation includingInsulation thickness ofvalves should be equal to the Insulation of PUF and GI Cladding of Pipe Section as sepcified of size 50 mm dia NRV. 63 Supplying, fixing, testing and commissioning of Automatic Air Purge Valves forhot water circulation headeras specified of size Automtic Air Purge Valve 20 mm dia. 64 Supplying, fixing, testing and commissioning of Air Separator compleate allas specified of size 50 mm dia. 65 Supplying, fixing, testing and commissioning of water pressure gauge (100 mm dia) bourdon type with brass ball valve of 3/8 dia and SS tubing, socket.Range (0-50) / (0-100) as required by Engineer In Charge. 66 Supplying, fixing, testing and commissioning of Mercury in glass industrial thermometer in SS-304 casing with 0.5 C least count, range 0-50 C. Brass oil filled thermowell of 1/2 size as required by Engineer In Charge. 67 Electrical distribution Panel Supply, installation, commissioning and testing of factory made, CHS Plant, indoor type made out of CRCA sheet 2 mm thick, frame factory fabricated with front and back openable double door with locking arrangement, with MS angle section 50x50x6 mm support, duly powder coated painting having thickness not less than 100 microns provided suitable gasket to make it dust and vermin proof, suitable for 3 Phase4 wire, 415 Volts, 50 Hz, AC supply system, floor mounted and grounting the legs of panel in PCC foundation 1:4:8 complete as all directed suitable for and including the following :- 68 INCOMERS(i) Bus Bar TPN Al extensible type main bus bars of minimum of 600 A capacity (As per capacity of corresponding incoming / Bus couplers) , and auxilliary bus bars ofsuitable capacity with heat shrunk coloured sleeves and i/c SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of50kA .(ii)MCCB 400 Amps, 415 Volt, 36 KA, 4 Pole,Microprocessor release- 01 No for incoming (Extended Rotary Operating Handle, Phase Spreader links and Phase barriers ) Make: Legrand/Schenider/SimensOUTGOINGS(i) 3Nos- 125A ,25 KA TPNMCCB/ACBwith Microprocessor release (3# Hot Water Generator)(ii) MCB 10 Amp,TPN,10KA, C curve - 06, 3 Nos for Pumps , 2 Nos for Pumps ,01 Nos for glycol transfer pump(iii) LED Phase indication lamps (01 Set) with 2Amp back up MCB,Breaker ON/OFF indicating light with 2A MCB, test terminal block set, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required. - 2 Set (iv) Digital Ammeter with in built ASS,metering C.T.sCAST RESIN type, 15VA, and accuracy class-1of 800/5A for measuring current in each phase - 01 Set.(v) All accessories prewired with appropriate size copper strip or wire and thimbles etc. all as required including foundations as per Manufacturers recommendations all as directed by Engnr-in-Charge.Note : Contractor will submit the drawing for approval of panel to GE before execution. 69 LT CABLES : Supply & Laying/ fixing of following size XLPE insulated and PVC sheathed AI conductor armoured cable/unarmoured as required of 1.1 KV grade complete as require (ISI Marked) (in ground/in pipe/in duct/on surface/on cable tray)Note for 49.01 to 49.04 :- Cable shal withstand temperature variation (-) 35 °C to (+) 35 °C at appx 3500 mtr above sea level. 70 3.5 Core x 70 sq.mm. (Electric Hot Water Generator) 71 4.0 Core x 10 sq.mm. (Pump) and (Pressurization Unit) 72 2 Core x 10 sq.mm. (Pump) 73 2 Core x 6 sq.mm (Pressurization Unit) 74 Earthing complete with Copperearth plate electrode of size 60cm X 60cm X 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including Copper strip of size 32x6 mm up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of brass and protected by light grade 40mm dia upto 7.5 mtr long GI pipe connected to main controlboard and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover 50mm thick and PCC chamber pit with PCC 1:2:4 type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing making test point and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified & directed by Engr-in-charge 75 S&F rubber matting conforming to IS-15652-2006 complete as required. of size2m x 1m x 25 mm 76 Glycol - Water SolutionSupplying of Ethylene glycol concentrate along with the necessary additives and inhibitor in cognition in sealed barrels complete all as directed.NOTE;- (i) The glycol concentrate shall be mixed with potable water supplied by contractor and filled in central heating system pipe line after proper leak test of entire circuit. The glycol water mixture ratio shall be 45 : 55 and freezing temperature shall be - 45 Degree Celcius (ii) First charge of glycol is included in the quoted rate. First Charge Include Charge in CHS pipe lineStorage Tank. (Glycol 45 % ,Water 55 %) 77 For CHS 78 Supply of Gycol for running of Plant for 12 months 79 GLYCOL CIRCULATING PUMP: Supply, Erection, Testing and Commissioning ofTransfer pumps for the capacity of 5 LPM 5 meter head for Glycol Fluidtransfer with base frame foundation, bolts coupling coupling guard,TEFC, (OEM design HP for the required Flowand Head ) andother accessories for proper function of the pump. 80 OXYGEN GAS MANIFOLD : Supply , installation , testing and commission 4+4 oxygen manifold with middle frame, tail pipe, NRV and ESSAB make 10x14 regulator complete all as specified and directed by Engr in charge . 81 Supply, installation , testing and commission 3 cylinder emergency inlet for oxygen complete all as specified and directed by Engr in charge . 82 Supply , installation , testing and commission automatic control panel with Analog Display 02 for oxygen complete all as specified and directed by Engr in charge. 83 S&F of copper tubing of size 15 mm OD, EN -13348 Grade , 0.9 mm wall thickness including proper saddling , clamping and insertion of branches connections including all fitting for medical use, complete all as specified and directed by Engr in charge. 84 S&F of copper tubing of size 12 mm OD, EN -13348 Grade , 0.9 mm wall thickness including proper saddling , clamping and insertion of branches connections including all fitting for medical use, complete all as specified and directed by Engr in charge. 85 S&F BS type gas outle with probe for oxygen for medical compleate all as specified and directed by Engr in charge 86 S&F 1/2 Brass ball valve with end fittings including all fittings for medical usecomplete all as specified and directed by Engr in charge. 87 S&F BPC flow meter (0-15 LPM) including humidfire bottle complete all as specified and directed by Engr in charge . 88 S&F 3/8 Brass ball valveincluding all fittings for complete all as specified and directed by Engr in charge. 89 STAND BY DG SET : Supply,install, test and commissioning of silent Diesel Engine Generating set 415 volts, 3 phase, 4 wireengine as per IS08528 conforming to CPCB Norms IV, and alternator as per IS08528 of capacity 400 KVA at NTP with control panel having meters, sound proof canopy etc with foundation (As per OEM design) including all accessories as per manufactures standard and as per the details given below and independent relay panel for automatic on mains failure:- AC Generator should be suitable for ambient conditions at nimu Leh area. 90 (A) Alternator : Standard design alternator rated at 400 KVA (320KW)net output at power factor 0.8, AC, 3 phase 4 wire, 415 V, 50 Cycles/Second, 1500 RPM self excited, self regulated, screen protected, drip proof IP 23 enclosure, brush less design, voltage regulation ± 2.5 % rated voltage from no load to full load and frequency regulation within ± 1.5 % tolerence. (B)DIESEL ENGINE : Vertical diesel engine of suitable capacity, closed circuit as per BS-649 or IS-1002 direct injection type, Electric starting system having rated speed 1500 RPM. The DG set Shall be capable for running with 10% over loading for 01 hour in every 12 hours as perBS-5514/BS-649. Engine shall be multi cylinder, multi stroke, direct injection andequipped with all standard fitting as per manufactures recommendations and mounted on common base frame with following Specifications.(a) Fly wheel with housing (i) Common base frame of sturdy design suitable for anti vibration mounting and permanent concrete foundation for mounting engine and alternator as per manufacturers instructions (b) Cooling system (i) Radiator with fan & belts & guard, rubber hoses and thermostat. (ii) Cooling water pump centrifugal type . 91 (c) GOVERNER : Electronic Governer (d) ELECTRIC STARTING SYSTEM : Electric Self starter , 24 volts DC(12 volt, 150 AH battery 2 Nos)charging alternatoraspermanufacturers design,copper leads with lugs of adequate size complete with initial charging of maintenance free battery 2X12 volt 150 AH capacity. (e) GENERATOR MONITORING PANEL : Comprising of following :- (i) Microprocessor based genset controller for metering, monitoring, governing and protection. (ii) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown) (iii) Alternator protection parameters like under voltage, over current, under frequency, over frequency (alarm & shut down) (f) ACCESSORIES:AVM Pads built or separately mounted to manufacturer base frames. (g) COUPLING ARRANGEMENTS: Fixed coupling, flywheel to suit fixed coupling and fly wheel housing.(h) EXHAUST SYSTEM : should have equipped with emission control device as per latest Govt norms. Silencer complete with exhaust pipe of suitable size upto and out side the building all covered with asbestos rope of suitable size all as specified and as directed.(j) FUEL TANK: Daily service fuel tank of capacity suitable for 8 hours continuous operation made out of 3 mm thick (heat retardant) sheet with indicating gauge, built inside the acoustic enclosures or as per manufacturers design 92 (C)ACOUSTIC ENCLOSURE : All as per CPCB norms IV and OEM of DG Sets design.(D)AMF Panel : Supply, install, testing and commissioning of AMF Panel outdoor type, cubical body,dust and vermin proofmade up of CRCA sheet painted with two coats of synthetic enamelled paint over a coat of red oxide primer confirming to IP 45 with front and rear opening with louvers andmounted on floor with PCC pedestal pillars with a clearance of atleast 0.3 m above ground level with glands sockets etc with provision of cable entry from bottom all pre wired and connected complete with following accessories:-(i) Microprocessor based Panel -01 No(ii) Power Contactor heavy duty suitable for generator and mains (iii) Over load relay for genset (iv) Suitable rating isolating switch MCCB for both DG & main supply.(v) Multi functioning meter to indicate voltage, current, frequency, P F, KW & KWH etc (vi) Emergency stop push button.(vii)Set of indicaters : - (a)Low lube oil pressure (b) DG Set over load(viii) Push button to start, stop (ix) Mode selector switch i.e Auto/Manual/Test/ OFF.(x) Set of Instrument fuse (xi)Set of aluminium bus bar of 600 Amps capacity 3 ph, 4 Wire system (xii) Automatic battery charging unit with DC voltmeter, Ammeter and selector switch for trickle/ Boost charging.(xiii) By Pass arrangement of main supply when AMF circuit fail due to any fault with provision of suitable rating change overs and switches. 93 The following items are deemed to be included in the rate quoted for all DG sets:- (i) DHPP for testing purpose shall be supplied by the contractor without any extra cost to Department. (ii)The contractor shall arrange for artificial load (water load/Electrical load) for testing for final testing of DG Set at site and the cost is deemed to be including in above offer. (iii) Testing of sound level should carried out at the site in presence of Engineer-in-Charge(iv) One set of latest Spare part catalogue with price, exploded view of parts and users manual are deemed to be included in the quoted rate.(v) All civil works including foundation for DGSet as per manufacturers drawing/ specification, foundation for AMF panel shall deemed to be included in the quoted rate.(vi) The rate quoted is deemed to be included for initial filling of radiator coolant and lubricating oil upto level.
Contract Date: May 29, 2026 Contract Value : ₹ 5.74 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Ladakh View Result →
33.
Educational and Research Institute #11186576 Technical Bid
Tender for Purchase Of Equipment For Electronics And Communication Department , 100Mhz/2 Channel Digital Storage Oscilloscope(Dso), Sample Rate 1Gsa/S, Record Length - 14Mpts, Wavwform Capture Rate-400,000 Wfm/S, Serial Decode/Trigger Functions, Advanced Math Operations-Fft, D/Dt, Integrate, Square Root 38 Parameters Automatic Measurements, 7 Inch Tft Lcd Display, Newest Generation Of Spo(Super Phosphor Oscilloscope) Technology Support Usb Host, Usb Device (Usb Tmc), Lan (Vxi-11), Gpib (Optional), Pass/Fail, Trigger Out, Impts, 500Uv/Div Sensitivity , 2 Channel 3Mhz Function Generator With Modulation, 3 Mhz Function Generator With Sine, Square, Triangle, Ramp, Pulse, Ttl & Dc, Frequency Range 0.3Hz To 3Mhz, Amplitude And Frequency Display, Internal And External Modulation By Any Signal By Am,Fm,Pwm,Pam,Fsk,Ask, Auto Ranging 40Mhz Frequency Counter, Auxiliary Generator With Frequency 20Hz-20Khz, Square Wave Rise Time- Better Than 50Ns , Dual Channel Power Supply 0-30V Continuous Variable Regulated 30V-2A, 0 To +/- 15V-1A, 5V-5A Multiple Power Supply, Dc 0 To 30V/2A, 0 To +/- 15V/1A Tracking, 4.5 To 5.5 / 5A Digital Display For Voltage And Current Protection Against Overload And Short Circuit, Adjustable Current Limiter, Constant Current & Constant Voltage , Multimeter - Digiital - Dc Voltage 1000V, Ac Voltage 1000V, Dc Accuracy +/- 1% +3 Digit, Current Dc 10Amp, Ac 10 Amp, Dc Accuracy +/- 1.5%+3 Digit, Ac Accuracy +/- 1.5% +3 Digit, Resistance 40 Mohm - Resistance Accuracy +/- 1.5% +3 Digit, Capacitance :1000Uf; Capacitance Accuracy +/- 5% + 5 Digit. Cat Iii 600V Saftey Rating, Bigger Display With Bright White Backlight. Over Voltage Indicator, Frequency And Temperature Measurements, Voltage, Resistance, Continuity, Capacitance Measurements, Input Terminal For Ac And Dc Current Measurements Upto 10A, Diode Test, Data Hold, Min/Max Ammeter And Voltmater Included.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Kerala View Result →
34.
Housing Urban and Rular Development #11175999 Technical Bid
Tender For Additional Work In Adj No 2 Court Distt. Baran- 1 S&F Following Sizes Of Isi Marked ( Is:14927 P - Ii ) Virgin Material Upvc Trunking Along With Accessories Like Coupler, Inner, Outer, Elbow, Square Box, Tee, End Cap Etc. On Surface With Screws, Expansion Fasteners As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 2 25 Mm X 12 Mm 3 Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Class 5 Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, In Existing Surface Or Recessed Pvc/ Ms Conduit/Casing Capping Making Connections With Copper Lugs Of Suitable Size, Ferrules,Testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 4 2 X 2.5 Sq. Mm. + 1X1.5Sqmm 5 2 X 4.0 Sq. Mm. + 1 X 2.5 Sq. Mm. 6 Providing & Fixing Of Modular Type Lockable Feature Socket Duly Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 7 25 Amp. 2 Module Socket 8 Providing & Fixing Of Modular Type 120 W Step Fan Regulator Duly Isi Marked (Is 11037:1984 ) With Cm/L No. Printed Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 9 5 Step Fan Regulator 2 Module 360 Dgree Rotating 10 Providing & Fixing Of Following Modular Accessories As Per Pwd Specification For Electrical Works, Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 11 Led Skirting /Foot Light 2 Module 12 Modular Mcb 6 A To 32 A Sp 13 Providing & Fixing Of 1200 Mm Sweep Bldc Technology Power Saving Ceiling Fan Which Can Withstand On Votage Fluctuations From 140 Volts To 240 Volts ,Power Factor Not Less Then 0.9 , Service Value (Cmm/W) Minimun 6.85 , Air Delivery Minimun 220 Cmm, Speed Minimum 330 Rpm ( Tolerance As Per Is:374 2019 ) Thd Less Then 10% And Complete With Down Rod Of 15 Mm Dia . Erw (Electrical Resistance Welded ) Of 1.6Mm Nominal Thick Medium Duty Steel Pipe Up To 80 Cm , Cotter Pin With 3 X 1.5 Sq.Mm Pvc Insulated Flexible Copper Conductor Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 14 Without Remote 15 Providing & Fixing Of Bee Star Rated Copper Wounded Double Ball Bearing Capacitor Start, Aluminium Body & Metallic Blade Ceiling Fan Conforming To All The Performance Requirements Laid Down In Is 374:2019 Including All Amendments, As Applicable ; & Carry Bis Licensing (I.E. Isi Marking) With Down Rod Up To 80 Cm With Secondary Support Safety Cable ( Steel Rope) , Cotter Pin With 3 X 1.5 Sq.Mm Pvc Insulated Flexible Copper Conductor Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 16 1200 Mm Sweep Bee 1 Star Rated (Service Value >=4.0 To 17 Rewinding Of Single Phase Motor Of 1400 Rpm Including All Necessary Material And Of The Same Characteristics As Original With Required Size Of Super Enamelled Wire E Class Insulation Material And Testing Etc. As Required. Replacement Of Material Or Components Shall Be Use As Per Guidelines Of Oem Of Original Product. All The Scrap Material Should Be Retained By The Contractor. 18 0.25 H.P. To 0.50 H.P. 19 Rewinding Of Single Phase/3Phase Submersible Motor Including All Necessary Material And Of The Same Characteristics As Original With Required Size Of Super Enamelled Wire E Class Insulation Material And Testing Etc. As Required. Replacement Of Material Or Components Shall Be Use As Per Guidelines Of Oem Of Original Product. All The Scrap Material Should Be Retained By The Contractor. 20 0.5 H.P. To 1.0 H.P. 21 Sitc Of Contactor Oem Fabricated Dol/Star-Delta Starter Panel With Switchgear Selection As Per Type-2 Cordinatiom Chart And Made Out From 1.6 Mm Thick Powder Coated Crca Sheet, Enclosure Comprising Of Over Load Protection Relay, Short Circuit & Single Phasing Protection, Illuminated On / Off Push Buttons, Ammeter, Voltmeter, Indicating Lamps Etc. Suitable For Following Rating Motors Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 22 For Single Phase Submersible / Monoblock Pump 23 0.5 Hp To 1.5 Hp (Dol Starter) 24 For Three Phase Submersible / Mono Block Pump 25 Upto 3.0 Hp ( Dol Starter ) 26 P/Laying Isi Marked P.V.C. Insulated Submersible Cable Confirming To(Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, Existing Pipe / Open Trench / Cable Tray / On Surface Including Making Connection Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 27 2.5 Sq.Mm 3 Core Flat / Round 28 Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Arrmoured Aluminium Cable Confirming To Is:1554 P-I / Is :7098 P - I Of 1.1 Kv With H4- Grade Electrolytic Aluminium Conductor Confirming To Is 8130 Of Purity >99.6 %, Round / Flat Strip Armouring Of Cables, Inner / Outer Sheath Confirming To Is:5831 In Existing Rcc / Hume / Stoneware / Pvc Pipe/ Open Duct/Cable Trench / Cable Tray(With Cable Tie) Including Testing Etc. As Required Of Following Size. Oem Must Have ItS Own In House Nabl Accrediated Laboratory For Testing Procedure As Per Is:10810.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 29 6.0 Sq. Mm 30 4 Core 31 50.0 Sq. Mm 32 3.5 Core 33 Add Extra For Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Direct In Ground Including Excavation Of Trench Of Size 75 Cm (Depth) X 35 Cm(Width) , With Procedure As Per Following Points:- (A) Make A River Sand Bed Of Height 125 Mm Along The Trench, (B) Lay The Cable In The Middle Of The Trench, (C) Provide River Sand Bed Of Height 125 Mm On Top Of The Cable, (D) Lay The Protective Common Burnt Clay F.P.S. Bricks Of Class Designation 75 / Sand Stone Slabs Of 50 Mm Thickness And 225 Mm Wide Just Above The Sand Bed Vertically Across The Cable ( Approx. 9 No. Bricks Per Mtr.), (E) Backfill The Excavated Soil Leaving 300 Mm From The Ground Level, (F)Lay The Cable Warning Tape And Again Back-Fill The Remaining Portion Of The Trench Upto The Ground Level And Compacting The Earth 34 P / L Of Double Wall Corrugated Hdpe Pipe Confirming To Is : 16205 P-24, Stiffness Class 750 N, Externally Corrugated And Having Smooth Surface Inside With Hdpe Coupler, Elbow, Tee At Required Depth Below The Ground For Laying Cable Of Following Nominal Outer Dia. Mfr Test Report From Nabl Accrediated Is To Be Submitted.(Excavation Of Earth & Back Filling With Compaction Is To Be Paid Extra)All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 35 50 Mm 36 90 Mm 37 Providing & Fixing Of 240/415 V Ac Mcb With Positive Isolation Of 10 Ka Breaking Capacity (B/ C/D Tripping Characteristic As Per Type Of Load And Site Requirement) 4 Kv Impulse Withstand Voltage, Isi Marked Is 8828(1996) / Conforming To Iec 60898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Of Class 3 As Per Iec, Minimum Phase Termination Capacity Of 35Sq.Mm. , Conductor Line Load Reversibility , Ip 20 Contact Protection And Fitted In Existing Distribution Board/Sheets, Minimum Electrical Operation 20,000 Upto 20 A Rating And 10,000 Upto 63 A, 5000 For 80 A & Above Rating Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 38 Single Pole Mcb (With B/C Curve Tripping Characteristics) 39 6 A To 32 A Rating 40 Four Pole Mcb (With B/C Curve Tripping Characteristics) 41 40 A Rating 42 Supply , Installation, Testing And Comissioning Of Inverter Type Air Cooled Hi Wall Split Type Air Conditioners With Latest Star Rating System As Per Bee Amended Upto Date Complete With Indoor Unit(Idu), Out Door Unit (Odu), Surface / Concealed Copper Refrigerant Piping With Insulation (Closed Cell Elastomeric Nitrile Rubber Tubular Pipe Section) Upto 3 Mtr (Idu To Odu), Copper Power Cable Upto 3.5 Mtr (Idu To Odu), R-32/R-410 Green Refrigerant, Wireless Remote Control, Suitable For Working Between 230V +/- 10% With Low & High Voltage Cutoff And 50 Hz , Single Phase Ac Supply Capable Of Performing Cooling, Dehumidification, Air Circulation Of Following Capacity With Scroll / Rotary Compressor. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 43 1.5 Tr Iseer Not Less Then 3.8 44 Supplying And Drawing Flexible / Stranded Bare Copper Conductor, Pvc / Xlpe Insulated, Overall Aluminium Mylar Tape Shielded Atc Drain Wire And Outer Pvc Sheathed Industrial Instrumentation (Shielded)Cables Voltage Grade 300/500 V As Per Bs /En 50288-7 In Existing Surface Or Recessed Pvc/ Ms Conduit/Casing Capping / Cable Tray / Open Duct Making Connections, Testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Cables. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 45 Un Armoured 46 4 Core X 2.5 Sq.Mm 47 Supply, Installation, Testing And Comissioning Of Interconnecting Copper Refrigerant Piping Of Dhe Grade C12200- Astm B68, B75, Chemical Composition Of Copper %- 99.0 Min And Phosphorus %- 0.015 To 0.040 . For Annealed Copper Tube :- Tensile Strength = 210 Mpa Wih Elongation % = 40 Min . Ink Mark Brand Printing On Hard Tubes Should Be Present. Duly Insulated With Tubular Elastomeric Nitrile Rubber Fm/Ul Approved With High Water Vapor Diffusion Resistance And Low Thermal Conductivity Should Be Certified Class O In Fire Propagation As Per Bs 476 Part 6 Including Chase Cutting Andfilling With Mortar, Slotted Channel Supports Mounted On 10 Mm Threaded Rod At Suitable Spacing The Exposed Piping Shall Be Wrapped With Glass Woven Cloth And Lag Coating For Vapour Barrier And Weather Protection. Joints Shall Be Covered With Nitrile Rubber Tape Of 3 Mm Thick Complete As Required Of Following Sizes. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 48 12.7 Mm O.D., Wall Thinkness ≥ 0.8Mm (Insulation – 13 Mm Thick) 49 6.4 Mm O.D., Wall Thinkness ≥ 0.8Mm (Insulation – 13 Mm Thick) 50 Providing & Fixing Of Is : 4985 - 2000 Class -4 (10 Kgf / Sqcm) Upvc Drain Water Piping With Fittings (Is:7834 & 10Kgf/Sqcm) Like Elbow, Socket, Tee, Solvent Cement Jointing, Support With Ms Hanger On Ceiling Or Recessed In Wall With Chasing & Plastering With 6 Mm Thick Closed Cell Elastomeric Nitrile Rubber Insulation Including Leakage Testing Etc. As Required Of Following Nominal Sizes. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 51 20 Mm 52 Making Hole In Stone Masonary/ Rcc Wall/ Rcc Slab With Core Cutter For Accomodating Refrigerant Pipe/ Drain Pipe/ Ms Pipe/ Cables Etc Of Following Dia 53 100 Mm Dia Per Running Inch Length 54 Supply & Fixing Ms Powder Coated Stand Suitable For 1.0/1.5/ 2.0 Tr Outdoor Type Of Split Ac. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 55 Supply, Fixing And Testing Of Following Capacity Iso Certified Company Made Wall Mounted Stabilizer Having Output Voltage Variation From 200 V To 250 V(+/-5%) With Input Voltage Variation From 170 V To 260 V, Time Delay Facility From 2 To 4 Minute And High Cutoff At 270 V With Providing Of 16 Amp /20 Amp Industrial Plug Top Making Connection Etc Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 56 3 Kva 57 Providing And Fixing Of Ip 65 Protected Polycarbonate / Polysterene Fuse Box Moulded With Inside Knock Outs Of Following Size With Hinged Cover, Transparent Window, Pu Gasket, Locking Arrangement, Duly Holded With 2 Nos. Pole Clamps Of 20 Mm X 3 Mm Flat With Nut And Bolts, The Box Shall Be Provided With Din Rail, 4 / 8 Way 10.0 / 16.0 Sq.Mm Heavy Duty Connector, Earth Terminal, Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 58 125 Mm X 200 Mm X 122 Mm 59 Supply, Drawing And Testing Of 4 Pair, 23 Awg Solid Bare Copper Wire Insulated With Pvc, Utp (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable As Per Latest Ammendments Of Ansi/Tia/Eia-568 , The Copper Conductors Should Be Balanced Twisted In Pairs, Seperated By A Cross-Member Fluted Pair Divider & Protected By Pvc Jacket. Certified Performance In A 4-Connector Configuration Upto 100 Mtrs Channel Requirements & Transmission Frequencies Up To 250 Mhz. In Existing Ms/Pvc Conduits/Casing Capping Including Making Connections To Information Outlets And Patch Panels With Jack & Ferruling At Both Ends For Identification With Necessary Tools For Punching, Stripping, Crimping And Testing Etc As Required Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 60 Supply And Installation Of Unsheilded/360 Degree Sheilded Information Outlets Made Of High Impact Plastic Body With Abs, Fr Grade Halogen Free Material With Provision For Protection Against Dust In Jack, Suitable For Cat 6/6A Application Complying To Latest Ammendments, According. To Cat. 6/6A Channel, It Should Support Channel As Well As Components Requirements Of Cat.6/6A Standards At Frequencies Of Up To 250 To 500 Mhz. Cat 6/6A Unshielded/Shielded Jack Should Be Suitable To Terminate 4 Pair, 23/24 Awg Solid/Stranded Wire Diameters, Using 100 Ohm Unshielded/Shielded Balance Twisted Pair Cable, The Jack Should Have Tooless/Impact Termination On Reliable Copper Tin Plated Insulation Displacement Contact, With Easy Lock Mechanism, It Supports Iec 60603-7-4 And Complied With Ansi/Tia/Eia 568 C.2 Standard. Jack Should Be Rj11,Rj12 & Rj45 Compatible. Should Support Ethernet 1.2 Gb/S Atm,Digital Video And Broadband/Baseband Analog Video, Voice Over Internet Protocal (Voip) Specifications In Existing Modular/Ms Boxes Along With Necessory Connections As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 61 Cat 6, Un-Sheilded Information Outlet 62 Supply & Fixing Of Square Faceplate For Flush / Surface Mount Information Outlets Single/Dual Or Quad Aperture , Material Should Be Pc+Abs Body, Suitable For Rj45 Unshielded/Shielded Connection Modules. Should Match With I. O. Oem. Dimensions Should Be 86Mm X 86Mm As Required Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 63 Single Aperture 64 Supply , Installation And Testing Of 4 Pair, 100 Ohm Impedance, Cat 6/6A /Class E/Ea Patch Cords Should Be Constructed Of Minimum 23/24 Awg, Stranded Bare Copper Cable With Frpvc/Lszh Jacket, With An Enhanced Performance By Factory Moulded Rj45 Connectors With Strain Relief Boots As Per Ansi/Tia/Eia 568-C.2 Suitable For Cat 6/6A Application Complying To Latest Ammendments Category 6/6A Standards, According. To Tia568C.2, Iso/Iec 11801, En 50173, Iec 60603-7-51, En 60603-7, Ieee 802.3An Minimum Requirement For 1G Base-T To 10G Base-T Performance. Patch Cords Shall Be Straight Thru Cable Compatible With Both T568-A And T568-B Wiring Schemes, Should Support Ieee 802.3Af / Ieee 802.3At For Poe Applications, Minimum 750 To 1000 Mating Cycles In Plug Contacts For Long Durability, Should Support Ethernet 10Gbase-T, 1.2 Gb/S Atm, Token Ring 4/16, Digital Video And Broadband/Baseband Analog Video, Voice Over Internet Protocal (Voip).All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 65 Cat 6, U/Utp (Unscreened/Un-Sheilded Twisted Pair) Patch Cord 66 0.50 Mtr 67 Plate Earthing As Per Is:3043 With Hot Dipped G.I. Earth Plate Of Size 600Mm X 600Mm X 6.0Mm By Embodying 3 To 4 Mtr. Below The Ground Level With 20 Mm Dia. G.I. B Class Watering Pipe ,Including All Accessories Like Nut, Bolts, Reducer, Nipple, Wire Meshed Funnel, And Heavy Duty Weather Proof Poly-Propylene Earth Pit Chamber With Lockable Jam Free Lid Suitable For Safe Working Load 5000 Kg Or More Of Size Top Dia. 225 To 260 Mm, Bottom Dia 300 To 350 Mm. And Height 250 To 300 Mm. And Embodying The Pipe Complete With Alternate Layers Salt And Coke/ Charcoal, Testing Of Earth Resistance For Value Of 5 Ohms Or Less As Required & Must Record By Engineer In Charge During Site Visit And Ensure To Enter In Measurment Book.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 68 Supply & Laying Following Size Earth Wire In Horizontal Or Vertical Run In Ground/Surface/Recess Including Riveting, Soldering, Saddles, Making Connection With Gi/Cu Purity Purity >95% Thimble Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 69 8 Swg G.I. ( Hot Dipped ) Wire 70 Sitc Of Ip-42 And General Construction Confirming To Is:8623 : 1993, Wall/ Free Standing Floor Mounted Dust And Vermin Proof Compartmentalised Cubical Panel As Specifications And Other Parameters Required As Per Point (A) ,(B), (C),(D), (E), (F), (G), (H) As Below:- 71 (A)Thickness Of Crca Sheet Shall Be 2.0 Mm, Cable Alley Compartments Having Concealed Hinged Type Doors With Key Type Lock With / Without Detachable Extension Type Structure. Removable 3 Mm. Thick Sheet Steel Gland Plates With Appropriate Size Of Knockouts For Cables Shall Be Provided 72 (B)Complete Panel Shall Undergo A Process Of Degreasing, Water Rinsing, Activation, Derusting, Pickling In Acid Bath, Phosphatising & Shall Be Subjected To Nine Tank Process And Then Powder Coated With Approved Shade Of Minimum 70 Microns On Both Side Of Panel. The Panel Having Pe Foam/ Neoprene Rubber Gasket Of Not Less Than 3Mm Thickness ,Required Hardware , Concealed Hinged Door With Key Type Locking Arrangement For Equipment/Switchgear Earthed With 2.5 Sq.Mm Braided Copper Wire. 73 [C) Interconnection Between Bus Bar And Switchgears /Cable Shall Be Rigidly Supported And Made Out By Flexible Copper Wires (Up To 63 Amp ) And By Solid Bus Bar (>63 Amp ) . Control Wiring Will Be Carried Out With 1.5 Sq.Mm, Earth Wire With 2.5 Sq.Mm And Ct With 2.5 Sq.Mm Flexible Copper Wire Only. All Joints / Interconnections Of Copper Bus Bar Shall Be Dully Tinned . Clearance Between Main Bus Bar And Risers / Metal Parts Shall Be At Least 10 Mm Additional To Width Of Bus Bar Bus Bar Is Insulated By Heat Shrinkable Sleeves . Earth And Neutral Bus Bar Shall Be Half Of The Size Of Phase Bus Bar. ( Cost Of Bus Bar / Flexible Wire For Interconnection Between Main Busbar And Switchgear Is To Be Paid Extra ) 74 (D)Wiring Between Components Within Switchgear And Incoming / Outgoing Cable Shall Be Done Through The Terminal Block Only. Direct Connection Shall Not Be Permitted. Each Terminal Block Shall Be One Piece Moulded, Barrier Type, 650 Volt Grade, Complete With Washers, Heads, Studs With Two Nuts And Identification Strips And Shall Have Adequate Continuous Current Rating. For Tap-Offs, Adjacent Terminals With Shorting Strips Shall Be Used. 10% Spare Terminal Blocks Shall Be Provided. Wire Identification On Marking Strip Shall Correspond To The Designation Of The Wiring Diagrams. All Wire Terminals On The Equipment Shall Also Be Marked With Designation Corresponding To Those Of The Wiring Diagram. 75 (E)All Wiring Shall Be Enclosed In Plastic Channels And Neatly Bunched And Closed In Metering Chamber, Wiring Between Terminals Of Various Devices Shall Be ‘Point To Point’ (No Wire Splitting Or Tee Connections) With Wires Neatly Trucked Along The Back Of The Panels, Adequately Supported To Prevent Sagging. 76 (F)Floor Mounted Panel Shall Be Mounted On Base Frame Of Ismc Channel Size 100 X 50 X 5 Mm ( To Be Paid Extra ) 77 (G) Tests: The Insulation Resistance (With 1000 V Megger) And High Voltage Power Frequency Test (By Applying A Voltage Of 2.5Kv For One Minute) Shall Be Measured Between Phases, Between Phase And Neutral And Between Phase And Earth. Both Before And After High Voltage Power Frequency Test. The Insulation Resistance Shall Not Be Less Than Three Megaohm. Ct Secondary Current Injection Test Shall Also Be Carried Out. 78 (H) Only Outer Surface Area On All Sides Shall Be Measured & Panel To Be Fabricated Only From Cpri Approved Fabricator Only (Cpri Test Certificates To Be Submitted)All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 79 Providing & Fixing Of 110/220 V, Unibody Led Indicating Lamp Iec 60947 With Integral Circuit, Ip 65 Above Panel & Ip 20 Terminal Block, Approx. Body Dia For Panel Not Less Then 20 Mm, Length Min. 50Mm, Front Led Cover Dia Min. 29 Mm, Contact Material Phospher Bronze For Led, Pcb Contacts Shall Be Of Brass (Tin Plated), Impulse Dielectric Tested For 2.5 Kv, Rated Insulation Resistance Shall Be 100 M Ohm At 500Vdc Including Connection Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 80 Red/Yellow/Green Colour 81 Blue / White Colour 82 Providing & Fixing Of Ik08, Ip 66 Protected Led Street Light Luminaire On Existing Bracket/Pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Material With Heat Dissipation Fins On Housing With Uv Stabilized Pc (Uv Stablization Report Submitted For Uv Cover ) /Toughened Glass Cover And Secondary Lens On Each Led & Should Be Smd Type Of 3 To 5 Watt Each . The System Efficacy >=125 Lm/ Wt And Potted Driver & Has A Unique Bis R Number With Input Voltage Ac 120 To 270 V Ac With High Voltage Cutoff @>=300 V Ac And Auto Resetting Safety , Power Factor >0.95 Driver Efficiency >85% ,Thd(I) 70 And Cct 5700K +355K. Surge Protection Shall Be Min ≥ 4 Kv Internal And Min 10 Kv External Inside Driver Compartment. Driver Should Be Phase To Phase Protection Of 440 V For 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing On Die Cast Housing To Allow Traceability/Authenticity. Fixture Shall Be As Per Is 10322 Complianced.Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79/Lm80) Certificate/ Report With Liable Warranty Of Product/Accessories From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 83 Led Street Light Fixture With Minimum Lumen Output 8700 Lm 84 P/Laying Isi Marked P.V.C. Insulated Submersible Cable Confirming To(Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, Existing Pipe / Open Trench / Cable Tray / On Surface Including Making Connection Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 85 1.5 Sq.Mm 3 Core Flat / Round 86 Supply, Installation, Testing And Commissioning Of Bis Compliance Professional Series Diagonal Screen Size 43\ Led With Resolution 3,840 X 2,160 (4K Uhd) Along With Static (Panel) Contrast Ratio (1300:1) Or Better With Viewing Angle Of 178/178 Degree With Response Time Of 8Ms Along With Hdmi In 2.0 - 2 Nos., Usb 2.0 - 2 Nos., Rs 232- 1 Nos., Rj 45- 1 Nos. With Built In Speaker(10W + 10W), With High Speed Processor And Android Or Other Reputed Operating System Along With 4 Gb Ram Along With All Audio And Video Decoder, Stand-By / Sleep / Off Mode Power 0.5 Watt. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/Work, Refer Annexure \A\ Attached With This Bsr. 87 Supply, Installation, Testing & Commissioning Of 1 Kva 1 Phase Input, With Igbt Based Rectifier True Online Double Conversion Robust Design Wide Input Voltage Range: 160-300Vac @ 100% Load (Linearly Derating To 50% Load @ 100Vac Input). Generator Compatible With Wide Input Voltage Window Double Conversion Efficiency >91% & Eco Mode Efficiency Up To 98% 100% Load @ 0~40C Operating Temp. Active Input Power Factor Correction 0.99 O/P Power Factor 0.9 Inbuilt Ovcd (Over Voltage Cut-Off Device) Fully Conform Coated Pcba Adaptable To Harsh Environment Offer Terminal Blocker On 2K/3K Rating To Connect To Big Capacity Equipment Digital Charger Technology Provide 02-10 A Charging Current Easy Understanding Lcd For Convenient Installation Setup With Minimum 60 Minute Battery Back Up (26Ah X 3 Nos Of Smf Batteries Branded And Recommended By Ups Oem, Battery Stand And Interlink Fr Pvc Copper Cable Of Appropriate Size And Lugs), With Required Cabling For Incoming & Outgoing Connection. Ups Should Be Nabl Certified With Ce, Rohs & Bis Compliance. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/Work, Refer Annexure \A\ Attached With This Bsr. 88 Supply, Installation, Testing & Commissioning Of 2 Kva 1 Phase Input, With Igbt Based Rectifier True Online Double Conversion Robust Design Wide Input Voltage Range: 160-300Vac @ 100% Load (Linearly Derating To 50% Load @ 100Vac Input). Generator Compatible With Wide Input Voltage Window Double Conversion Efficiency >91% & Eco Mode Efficiency Up To 98% 100% Load @ 0~40C Operating Temp. Active Input Power Factor Correction 0.99 O/P Power Factor 0.9 Inbuilt Ovcd (Over Voltage Cut-Off Device) Fully Conform Coated Pcba Adaptable To Harsh Environment Offer Terminal Blocker On 2K/3K Rating To Connect To Big Capacity Equipment Digital Charger Technology Provide 02-10 A Charging Current Easy Understanding Lcd For Convenient Installation Setup With Minimum 60 Minute Battery Back Up (26Ah X 6 Nos Of Smf Batteries Branded And Recommended By Ups Oem, Battery Stand And Interlink Fr Pvc Copper Cable Of Appropriate Size And Lugs), With Required Cabling For Incoming & Outgoing Connection. Ups Should Be Nabl Certified With Ce, Rohs & Bis Compliance. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/Work, Refer Annexure \A\ Attached With This Bsr. Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Rajasthan View Result →
35.
Educational and Research Institute #11175701 Technical Bid
Tender for Supply Of Printed 06 Lakhs Answer Sheets Per Annum For A Period Of Three Years (36+04 Pages) With Omr & Bar Coding At Crsu,Jind. , Details Of Equipments/Elevators , 40 Pages Answer Books With Omr Sheet (36 Pages + 2 Pages Omr Sheet With Bar Code Having 2 Bar Code Detachable Portion, + 2 Page Revaluation Sheet) Inclusive Title. The Blank Answer Booklets Will Have The Following Specifications:- A) A4 Size Portrait (280 Mm X 210 Mm) Approx. B) The Cover Page Of The Booklet Will Be Omr Based And The Instructions Will Be Printed On The Back Side Of The Cover Page. C) The Booklet Shall Be Printed In Three Security Features Invisible Printing University Logo (Visible In Uv Light Only) In All Pages, Paper Mill Watermark Logo In Partially Printed On All Pages & Micro Line In All Pages. D) All Pages Of The Booklet Should Have The Variable Barcode Printed In Incremental Values Of Page Number As Suggested By The University On Top Right Hand Side Corner (Horizontal) Position. E) The Paper Used Must Be Dust Free And Should Be Made Of Bagasse Pulp/ Wood Pulp. A Proper Test Report From An Authorized Central Government Agency Must Be Attached Along With The Technical Bid. F) The Paper Must Not Be Made Of Recycled Pulp. G) The Cover Pages Of The Booklet Shall Be Of 105 ± 2.5% Gsm And The Internal Pages Will Be Of 70 ± 2.5% Gsm Maplitho Paper Adhering To The Indian Standard Is:1848- 2018 (Or The Latest Update). The Delivered Answer Booklets Must Conform To The Following Parameters: • Grammage Per Square Meters Of The Used Paper: 70 ± 2.5%. • Brightness Percentage: Minimum 80%.• Opacity Percentage: Minimum 90%. • One Minute Cobb Test For Water Absorption: Maximum 25%. • Tear Test: (Cd-Minimum 4) & (Md -Minimum 3.5). • Braking Length: (Cd-Minimum 1800) & (Md-Minimum 4000). Printing: Title Page Of Omr Sheet & Its Back In Magenta Color. Sky Blue Ink In 2 Page Re-Evaluation Sheet. Stitching: Thread Sewing As Per Sample Ruling: Vertical Ruling For 1 Margin In Red Ink On Left Side Of Each Leaf And For Writing In Blue Ink With Horizontal Lines On Each Page
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Haryana View Result →
West Bengal View Result →
West Bengal View Result →
38.
Health and Family Welfare #11168074 Price Bid
Automated Coagulation Analyzer , Automated Coagulation Analyser , Cost/Test For Pt(Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Aptt (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Atiii(Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Tt(Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Fibrinogen(Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Lupus Anticoagulant Screen(Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Lupus Anticoagulant Confirm(Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Anti-Xa (Ufh & Lmwh) (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For D-Dimer(Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Chromogenic Protein C (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Factor Vill (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Factor Ix (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Chromogenic Free Protein S (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) , Cost/Test For Additional Parameter 1( (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.) Name Of The Test Shall Be Mentioned In T. , Cost/Test For Additional Parameter 2( (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.). Name Of The Test Shall Be Mentioned In T. , Cost/Test For Additional Parameter 3( (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.). Name Of The Test Shall Be Mentioned In T. , Cost/Test For Additional Parameter 4( (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.). Name Of The Test Shall Be Mentioned In T. , Cost/Test For Additional Parameter 5( (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.). Name Of The Test Shall Be Mentioned In T. , Cost/Test For Additional Parameter 6( (Which Includes The Cost Of All Reagents And Consumables Required) . (Rate Offered Must Be Inclusive Of Tax.). Name Of The Test Shall Be Mentioned In T. , Pack Size Of Pt( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Aptt ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Atiii( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Tt ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Fibrinogen( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Lupus Anticoagulant Screen And Confirm ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Anti-Xa (Ufh & Lmwh)( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of D-Dimer ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Chromogenic Protein C ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Factor Vill( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Factor Ix( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Chromogenic Free Protein S( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Standard Pack Size Which Is Used For Calculation Shall Be Mentioned Here. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T. , Pack Size Of Additional Reagent/ Consumables ( Standard Pack Size And Rate /Pack Available For The Bidder May Be Filled Up In The Respective Columns). Rate Will Be Freezed For 3 Years. Consumption Per Test Can Be Mentioned In Column T.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Kerala View Result →
39.
Housing Urban and Rular Development #11162283 AOC
Providing the manpower for electrical preventive and breakdown maintenance Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033for the period of 12 months.- 1 Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033 2 Skill Electrician: 03 Nos per day 3 Semi-Skill Electrician: 03 Nos per day 4 Un-Skill Electrician: 02 Nos. per day 5 Semi-Skill (Lift Operatror cum Attendent): 02 Nos. per day 6 SCOPE OF WORK:-1. The Scope of maintenance of electrical installation includes Routine, Preventive and Corrective Maintenance of L.T. Distribution lines to each floor of all the buildings/ blocks, entire wirings, BDB, PDB, VTPN, LT panels, Feeder Pillar Box, power & distribution cables, fittings & fixtures, Switch Boards, Power and Computer Points, Power outlet of all sorts of Air-conditioning Systems,resetting/ Switching off of Fire detection system during normal operation/ malfunctioning etc., Operation, configuration & repair / replacement of Timers for AC / Compound light, Compound Lighting including high mast, all glow sign and metal sign boards in the campus, Electrical Installations/ distribution up to Switch Board/ Panel of Lift Machine Room & Pump Room and / or Kiosk of Pump for Water Supply system, in the premises of above mentioned site. 7 2. Cleaning & checking of all the fittings & fixtures, Panels, TPN & SPN DBs, SFUs & other Electrical Installations, as well as the Compound Light installations in a regular interval to keep them in a tip-top condition at the cost of the agency and the same must be recorded in log book.3. The checking & repairing of the different types of light fittings, ceiling fans, exhaust fans etc. has to be done by the agency at his own cost (except rewinding of ceiling fans and exhaust fans) including dismantling and re-fixing of the same. (Major materials to be supplied by department). Especially, all the ceiling fans of entire worksite are to be inspected, at least once in 3(three) Months, in respect of Split Pin, Jam nut etc. to prevent unwanted falling of Ceiling Fans, failing which responsibility will be fixed up upon the agency. Split Pin, once taken out from the installation should not be re-used under any circumstances. Required number of Split Pin and Jam nut should be provided by the agency at their own cost. Building wise Fan register should be maintained as per Performa provided by the department, wherein each and every details of checking, replacement of spares, repairing etc. should be recorded against individual fan and every record should be signed by the attending Electrician / responsible person of the agency, duly countersigned by the concerned J.E. and A.E. 8 4. Measuring of various electrical parameters e.g. Current, Voltage, Temperature of different L.T. panel board, BDBs, Main switches etc., test of Insulation Resistance, Earth Resistance etc. are to be carried out every month and test results are to be recorded in Log book (preventive maintenance). Thermal Imaging Scanner should be used for measuring temperature of electrical equipment regularly to find out any abnormalities and printout of thermal image with date and time stamp should be provided to the concerned J.E. and A.E. In case, any abnormal reading is noticed, the same should be rectified/set right immediately by taking prompt, appropriate & effective measures/actions in consultation with concerned AE&JE. Thermal image should also be taken after rectification. The engaged agency will supervision overall maintenance works and examine Logbooks for any abnormality and sign the Logbook accordingly5. Switching On/Off of the common service lighting e.g. compound, corridors, staircases etc. and AC machines, Light, Fan etc in closed room like Library, Store, OPD, OT or these are not run beyond Office hours or off day will be the responsibility of the agency. 6.Cleaning of Sub-station rooms,LT Panel rooms,operation of HT switch gear & resetting the protective rekeys in case of any fault occurred will be the responsoibilty by the agency . 9 7. Operation of DG sets & checking and maintenance of AMF panel, Checking of Battery, checking of fuel level of DG Set, Lubricating oil etc, carrying & pouring of Fuel if necessary and maintaining separate log book for DG Set as per given Proforma. For Operation of DG Sets, experienced and skilled operator should be provided8.Llift operation cum attendent including regular cleaning of lifts etc as per direction of EIC.9. Regular dusting and cleaning of fire detection sensors and others parts including reset of fire alarms. 10 TERMS & CONDITIONS:-1. The agency has to depute manpower as directed by the EIC carrying out the maintenance work smoothly with due regard to the safety.Category of Staff:- i) Skilled Electrician --03 (Three) Nos per day ii) Semi-Skill Electrician--03(Three) Nos. per day iii) Un-Skill Electrician: 02 Nos. per dayiv) Semi-Skill (Lift Operatror cum Attendent): 02 Nos per day 11 2. The Maintenance Personnel, deputed by the agency havingvalid Voter Identity/ Adhaar Card and should possess valid Workman Permit/ License, as mentioned below, issued by Directorate of Electricity, Govt. of West Bengal.Category of Maintenance Personnel Mandatory Requirementa. Skilled Electrician Having Electrical/ Workman Permit i(b), ii & iv issued by Directorate of Electricity, West Bengal.b. Semi-Skilled Electrician Workman Permit i(b) and (ii) issued by Directorate of Electricity, West Bengal.c. Un-skilled Personnel/ Helper Basic knowledge of Electrical works.Also the Superviser of the company should have valid SCC Parts 1,2,3,4,5,6A,7A,7B ,9,11,12. 12 3. Agency must have to submit mandatorily the list of staff mentioning their Name, contact Mobile No., category, along with photo copy Valid Workman Permit, proper identity and address proof etc, in writing to the concerned JE & AE before commencing the work. All the photocopy should be attested and authenticated by the Agency.4) The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the Maintenance Staffs deployed including substitutes.They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE.5) The agency will maintain shift wise attendance register at call center to record the attendance of the staffs on duty which will be authenticated/ verified by the concerned Junior Engineer/ Officer- in-charge. 13 6) The agency shall have to prepare a Duty Roster of the Maintenance Staffs at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE and one copy should be available at the call centre.7)The agency will have to provide proper uniform for his maintenance staff at his own cost and clour of the dress will be decided by the EIC. No staff will be allowed for performing duty without proper uniform. 8) The agency, and all the electricians deputed at worksite must have Mobile Nos. and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay. 14 9) The agency has to provide one GPS activated smart phone dedicated for call center. The cost of the handset and running cost i.e. phone bills have to be borne by the agency. No claim of payment against any telephone bill will be entertained by this department.10) The agency should have a close watch on the attendance of the Maintenance Staffs. In case of absence of any Maintenance Staffs, the agency shall have to arrange for suitable alternative within an Hour, failing which, the charges for that day will be deducted from the bill of the agency on pro-rata basis.The Executive Engineer,Electrical Constrution Division ,P.W.D. reserves the right to terminate the contract in case of absence of Maintenance Staffs for more than three consecutive days, without showing further reason. 15 11) In case of any Accident and or physical illness of the staffs of the agency, while on duty, no claim will be entertained by this department and all responsibilities thereof should be shouldered by the agency only. Minimum wages as per existing Labor Act should be paid to the Electrician(s) and Helper(s)12) The agency shall have to provide 500V Megger, Digital Multi meter, Earth tester and all other requisite tools and tackles sufficient for checking, testing and recording of health of all electrical installations. Other tools & tackles e.g. Crimping Machine, Line Tester, Screw Driver, Pliers, Stripper, Sockets of some common sizes etc. should also be available at site, in sufficient quantities, free of cost, under disposal of their maintenance staff.Deployed employee by the agency should have sufficient knowledge to operate The Thermal imaging Scanner or to be used by the direction of Assistant Engineer/ Junior Engineer.13) The space for sitting accommodation for the staffs of the agency inside worksite premises will be provided by the competent authority. 16 14) All the maintenance staff of the contractor should have proper & constant vigilance and check that, there is no sign of heating-up, burning smell, discoloration or sparking at any of BDBs, panel boards, rising main etc. due to overloading or loose termination. Care should be taken to check any highly unbalance in loading at any point.15) In case of power failure or development of any unfavorable situation the agency will have to communicate with the concerned Power Supply Company authority and extend help or cooperation to said authority in restoration of power supply. Meanwhile the agency will have to operate the switching mechanisms of interconnections among available sources at suitable locations to maintain power supplies at important locations by monitoring and/ or restricting electrical loads in consultation with the concerned Junior Engineers & Assistant Engineer.16) Routine checking and preventive maintenance and breakdown maintenanceof the electrical installations has to be carried out by the agency maintaining a register under signature of respective Junior Engineer and Assistant Engineer with a view to ensure uninterrupted power supply within worksite campus. 17 17) Materials required as replacement during maintenance of electrical installations e.g. Lamps, SFUs, SPNDB, TPNDB, Cables etc. will be supplied by the Department for which requisition of Materials, signed by the authorized representative of the agency, should be submitted to the concerned JE (Electrical) well in advance. A separate material stock register should be maintained by the agency where entries related to Issue, Consumption & present stock position of Materials should be made. However auxiliary items like fuse wires, screws, nuts, bolts, washers, insulating tape, Split pins of Ceiling Fans, dusters etc. will have to be supplied by the agency at his/ their own expense.18) The agency shall have to deposit all dismantled unserviceable materials such as fused lamps, defective condensers, starters, and timers, MCBs etc. to the concerned Section Office or any other locations within worksite premises by the agency by its own laborers / arrangements / tools and tackles as per the direction of the Assistant Engineer/ JE concerned. Fresh materials will be issued against respective defective materials. No materials should be taken out of the maintenance site without the permission and necessary challan of the site-in-charge/JE 18 19) Any major shut down or fault should be brought to the notice of JE/AE immediately in writing and over telephone for further course of action. The agency will also have to attend emergency calls immediately at the site with staff, tools etc. on demand. 19 20) In case of any breakdown caused by cable fault etc., if situation demands the agency will have to restore the power supply temporarily either with the materials available with this department or arranging the same temporarily and safely at his own cost till completion of original restoration work.21) Building wise Log book is to be maintained for Preventive Maintenance & Cleaning and Corrective Maintenance of Electrical equipment except Fan as per direction of E.I.C. Separate Building wise Register is to be maintained for Ceiling Fans. The daily record of the Log book is to be signed by the responsible person and verified & signed by concerned JE & AE and photocopy of the same should be sent to the Executive Engineer concerned through proper channel at the time of submission of bills. The Logbooks should be available at Call center and should be produced on demand. 20 21) The agency should be responsible for any damage in the installation due to mishandling or mal- operation by its staff and shall be liable for rectification / replacement, as the case may be, of the damaged installation/ equipment within time frame to be fixed by concerned A.E., failing which the said rectification/ replacement of affected equipment/ installation would be executed by external agency and the cost thereof would be recovered from the bill and the accused staff should be replaced immediately.22) Bills should be submitted quarterly with the certification of satisfactory performance of the concerned JE and AE. Photocopy of Logbook and Attendance Register should also accompany the Bill. Payment should be made as per PWD norms. 21 23) Any fault of electrical installations starting from LT supply end (except the installations of Power Supply Company) to light, fan, call bell, plug points etc. i.e. LT cables and all sub-panels, distribution boards, main switches, earthing attachments, compound lights etc. has to be detected, attended and restored by the agency by its own man power with the help of the materials(cables, main switches, DBs, wires, HRC fuses etc.) available from this department or as per the terms & conditions of this contract. 24) If any kind of incapability & negligence are noticed in observing all the above-said terms & conditions causing inconveniences to public service, is subject to unilateral penalty, be it detected on the spot or thereafter (even after payment). This Department also reserves the right to deduct the cost from the bills of the contractor on pro-rate basis as determined by the Engineer –In-Charge for any shortfall in observing above T&C. In that case, the above- said contract may be terminated without issuing any notice and Stringent & punishable action may be taken against the contractor. 22 25) The technitian of the agency should capable of Casing -caping /rigid conduit wiring to overcome the emergent situation .25) The contract may be terminated with one months’ notice on either side (both agency and tender awarding authority) . 26) At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .27) Any upcoming / Ongoing project, which will be completed within stipulated period of Maintenance contract, automatically will come under maintenance contract .28) All the log-books should be available at the call center and to be produced to the Office of the AE/ JE on demand. 29) This Maintenance contract covers all the buildings, blocks, outdoor electrical gadgets within the premises ofTechnician Studio, Kolkata-700033 23 TERMS & CONDITIONS FOR OPERATION OF LIFTS:- 24 1. The agency has to depute manpower as directed by the EIC carrying out the lift operation smoothly with due regard to the safety.Category of Staff:- Semi-Skill (Lift Operatror cum Attendent): 02 Nos. 25 2. Day to day Attendent -cum -operation of passenger lift foras directed by the EIC.3. The lift operator/attendant should have a sound knowledge with valid lift operator license issued by the Licensing Board, Govt. of West Bengal.4. The operator/attendant should be obliging dutiful and polite to all while on duty. In case any irregularities of duty or complain against the operator/attendant if noticed, would be withdrawn forthwith and shall be replaced by new operator.5. The report is to be submitted periodically about the working of lift incl. all safety devices and Governor to the concerned JE/AE. 26 6. Agency must have to produce the list of the staff mentioning their Name, contact Mobile No.in writing with proper identity and address proof & their Valid lift operator license issued by the Licensing Board, Govt. of West Bengal along with photo copy to the concerned JE & AE before commencing the work. This should be treated as mandatory.7. The agency will have to provide proper dress for his staff and color of the dress will be decided by this department. No staff will be allowed for performing duty without proper dress.8. The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the operation Staffs deployed including substitutes. They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE 27 9. The agency shall have to prepare a Duty Roster of the operation Staff at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE.10. The agency must have separate contact telephone numbers with Mobile Nos. for his office and Supervisor deputed at worksite so that the agency may be communicated in case of any urgency and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay.11. The lift enclosure to be kept clean (not sweepers works) regularly by the operator 28 12. The operational work of the lift is to be supervised directly under the supervision of technical staff of the contractors under the direct control of JE/AE concerned. The contractor shall be responsible for any damage to the lift due to mishandling; loss will be recovered from the contractors bill as per direction of EIC.13. The Log Book recording regarding functioning and breakdown of the lift is to be maintained at site by the contractor under supervisions of JE concerned. If any kind of trouble arises, it should be brought to the notice of JE, AE concerned immediately. The JE/AE would put their signature on log book making note on performance. 29 14. In case of any absence of operator, the lift is to be made operative within 2 hours by placing the new operator. In case of absence prorate deduction will be made from the contractors bill and the contract may be terminated if it exceeds 3 (three) days. In this respect Executive Engineer’s decision will be final.15. This department would not be held responsibility for any accident of the liftman on duty for any reasons. The contractor or their lift operators on duty would not claim any compensation in any shape from this department for such accident. 30 16. The Executive Engineer,Electrical ConstructionDivision, P.W.Dte. would have sole authority to cancel the contract without assigning any reason with a notice of one month only.17. Any conditional quotation offered would not be accepted.18. Any quotation offered with price variation clause would not be accepted.19. The payment will be made monthly/quarterly on submission of bill in triplicate by the agency with satisfactory report regarding performance by the concerned JE/AE. Copy of log book has to be enclosed with the bill. 31 20. Persons entrusted by the agency for operation of lift should wear photo Identity Card during duty hours.21. Documentary evidence in support of payment of minimum wages as per Labour Act to be produced to the Principal Employer i.e. Executive Engineer, Electrical Construction Division, P.W.Dte. in-charge of works.22. Rescue operation is in the scope of agency in case of exigency arises out of lifts getting stopped in between landing floors with passengers inside cage.23. No claim towards cost of uniform, PPE e.g. Hand Gloves, Mask, Goggles, protective body- ware etc. for the maintenance staffs should be entertained by this department. However, if any such equipment/ dress is available from the Hospital Authority for their statutory requirement, the same would be provided. BUT IN NO CASE IT SHOULD BE ENTERTAINED AS MANDATORY CLAIM.24.At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .
Contract Date: Mar 09, 2026 Contract Value : ₹ 14.46 Lakh
Government Departments No of Bidders 4
West Bengal View Result →
40.
Educational and Research Institute #11161433 Price Bid
Procurement Of Equipment, Instruments, Machinery, Tools Etc. Related To Laboratories And Workshops Of Electronics And Telecommunication Engg., Engineering Physics, Engineering Mechanics Of Mirik Government Polytechnic, Mirik, Dist. Darjeeling, 734214 , Spherometer (Screw Pitch 0.05 Mm And Lc 0.005 Mm) , Concave Mirror (Focal Length 20 Cm) , Convex Mirror (Focal Length 20 Cm) , Concave Surface (Focal Length 20 Cm Diameter 50 Mm) , Hooks Law Apparatus (Consisting Of 30 Cm Long Mirror Scale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand) , Mercury (Distilled Liquid Mercury, Grade Std.-Biotech Grade) , Flywheel Apparatus (Thickness: 4.4 Cm Diameter :20 Cm) , Cantilever (Length 100 Cm, Hook At One End, C Clamp) , Light Weight Hanger (Metal Slotted Weight Mechanics Physics Experiment Equipment Set With Hook With Weight Of Each Mass Of The Order Of 50Gm Or 100 Gm) , Inverse Square Law Apparatus (Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter) , Stopwatch (Digital Stopwatch With Ms Count) , High Resistance Box (Resistance Box Plug With 1 To 10 K Ohm Resistance) , Winch Crab Single Purchase With Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut.String, Weight Box With Pan. ] , Winch Crab Double Purchase Without Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut. ] , Worm And Worm Wheel Single Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Worm And Worm Wheel Double Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Wheel & Axle Simple Without Weight [Standard Setup For Lab.] , Simple Screw Jack With Weight [Experiment Set Up Screw Jack ( Weights)All Metallic Construction Accurately Machine Cut Screw With A Pitch Of 5 Mm Carrying A Double Fanged Turn Table Of About 20 Cm Diameter. Fitted On A Heavy Cast Iron Base And Complete With Two Adjustable Pulleys, Cord And Hook. Weights Are Included.] , Combined Inclined Plane & Friction Slide Apparatus Iron Base & With Weight [Standard Setup For Lab.] , Parallel Forces Apparatus [Experiment Set Up Simple Supported Best Type Supported At Its End. For Verification Of Condition Of Equilibrium Of Parallel Forces, Law Of Lever & Forces On Beam Etc. Consisting Of Two Compression Thrust Type 10 Kg Tubular Spring Balances Fixed On Wooden Polished Board, A Wooden Beam With Steel Back Plate. Complete With Two Strups, Hooks & Two 10Kg Weights. ] , To Verify Lami’S Theorem [Gravesand Apparatusboard: Wooden With Metal Base Pulley: Z-Pullies (2 Nos) With Adjustable Distance Weight Set: 5X50 G (3 Sets). ] , Simple Jib Crane Apparatus Iron Stand With Weight [Experiment Set Upwith Consisting Of A Tubular Compression Balance, Pivoted About An Axis Fitted To The Base. The Tie Chain Has An Adjustable Angle Bracket And Fitted With A 10Kg Extension Balance. Completion Wooden Base With 1.2 Meter Jib. With Weights. ] , Mini Drafter, T Square, Protractor, Set Squares, Compass, Divider [Made Out Of Wood. To Be Used In Chalk Board] , Model Of Geometric Constriction (Solid Cube, Solid Primed, Cylinder, Cone, Hexagon, Tetrahedron ) [Made Out Of Wood. To Be Used In Chalk Board] , Amplitude Modulation And Demodulation Trainer Kit [Message Signal:100 Hz To 2.8 Khz, Carrier Signal 28 Khz To 108 Khz,Modulation : Balanced Modulator, Amplifier : Op Amp Based, Demodulation : Diode Detector & Lpf(6Th Order)] , Frequency Modulation Anddemodulation Kit [On-Board Message Signal With Variable Amp/Freq,On Board Carrier Signal Fm Modulation Using Xr 2206Ic,Demodulation Using Pll Detector And Lpf 4Th Order Lpf,Internal Power Supply +5V , +12V/ 500 Ma] , Super Heterodyne Am Radio Receiver Trainer Kit To Measure Sensitivity, Selectivity And Fidelity [On Board Variable Capacitor Tuning,Receiving Antenna,Local Oscillator,Bfo, Rf Amplifier, Mixer,If Amplifiers, Detectors, Agc,Audio O/P Amplifier, Speaker.Frequency Range: 400Khz To 1700Khz,If Frequency: 455 Khz.] , Pam, Pwm And Ppm Modulation And Demodulation Trainer Kit [Provides Sine Waveform Output Of 250Hz, 500Hz, 1 Khz, And 2 Khz With Amplitude Adjustments Of 0 - 5Vp-P. Switch Selectable Sampling Clock Of 4, 8, 16, 32 Khz. On-Board Features Analog Sample Circuit/Output, Sample & Hold Circuit/Output, Flat Top Circuit/Output, 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz.] , Analog Signal Sampling & Reconstruction Trainer Kit [±15V D.C. At 100Ma, Ic Regulated Power Supply, A.F. Signal Generator For Modulating Signal.Sampling Clock Generator To Provide Sampling Clock And Gate Pulse. Modulator Circuit For Flat-Top Natural And S/H Circuit. Demodulator Circuit To Reconstruct Input (Sinewave)] , Telephone Receiver Trainer Kit [Line In Section : One Dot Line Connection Port.Handset : One Handset Connection Port. Keyboard : 4X3 Matrix Keyboard.Dialer : Tone And Pulse. Facilities : Redial Up To 32 Digits, Mute, Redial, Flash, Pause Switches.Indicators : Line In, Hook, Tone And Ringer, Call Mute Section.Control : Ringer Volume Control, Ringer Speed Control.Speech Path : Fully Non-Blocking.Dial Pulse Ratio : 10 Pps + / - 10%.] , 100Mhz Digital Oscilloscope [Bandwidth: 100 Mhz, 2 Analog Channels+ Ext With Probes Included Rise Time: =3.5 Ns, Real-Time Sample Rate Of 1 Gsa/S 1% Dc Gain Accuracy Should Support Rs232/Uart, I2c And Spi Bus Triggers And Decodes Usb And Ethernet Connectivity] , 30Mhz Analog Cro [Dual Trace Dual Channel Oscilloscope. Bandwidth: 20Mhz. Full Bandwidth Sweeping Circuit , Tv-H / Tv-V Synchronization And Trigger-Lock To Observe All Kinds Of Signals Stably. Y Deflection Operation: Y1, Y2, Alt, Chop, Add, Mode.Horizontal Sweep Mode: Auto, Trig, Lock, Single.X-Y Mode Input: X-Axis Yi And Y-Axis Y2.] , 2 Mhz Function Generator [Frequency: 1Hz – 2 Mhz Sine, Square, Triangle, Ttl Output] , Digital Storage Oscilloscope (100 Mhz) [Bandwidth 100 Mhz, Channels: 2+, Display: Tft Color Lcd Of Suitable Size (Capacitive Touchscreen). Sampling Rate: 1 Gsa/S Real Time, Sampling Mode: Normal, Average (2, 4, 8, 16, 32, 64, 128, 256), Peak Detect. Mathematics: A+B, A-B, A×B, Fft (Fast Fourier Transform). Fft Windows: Rectangle, Hanning, Hamming, Blackman. Auto Measurement: Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1-2 (Rise), Delay1-2(Fall) ] , Trainer Kit For Rectifier With And Without Capacitor Filter For : — (A) Half-Wave Rectifier, (B) Full-Wave Rectifier, (C) Bridge Rectifier [Transformer Rating : 9-0-9V/200Ma, Rectifiers : Half Wave; Full Wave - Bridge, Center Tapped Rectifier,On-Board Dc Voltmeter : 0 - 20V,On-Board Ac Voltmeter : 0 - 20V,Load : Variable Resistive Load 10K,Filter Circuit : In-Built- Capacitor (3Nos.),In-Built- Inductor (1No.),Input Line Voltage : 230V Ac ± 10%, 50Hz] , Push-Pull Amplifier Trainer Kit [I.C Regulated Power Supply : +6 V.Digital Ac Voltmeter: 0 – 20 V.Digital Ac Milliammeter : 0 – 200 Ma.Set Of Resistances.Set Of Capacitors.Two Transistors Cl 100 And Ck 100.Connecting Wire.] , Fet Characteristics Trainer Kit [Variable Dc Regulated Power Supply Of 0-5V At 250Ma. Dual Range Dc Voltmeter Of 1.5V/15V.Dc Ammeter Of 0-20Ma.] , To Determine Frequency Response Characteristics Of Rc Coupled Amplifier Circuit And Calculation Of Bandwidth, Midband Gain, Input Impedance And Output Impedance For: (A) Single-Stage Amplifier (B) Double-Stage Amplifier [Sine Wave Oscillator 15Hz To 150Khz In Four Ranges With Amplifier & Amplitude Adjustable.Three Decade Resistances Bank In Steps Of 1K, 10K & 100K Per Steps Total Step 30.Two Pnp Transistors.] , Mosfet Characteristics Trainer Kit [On Board Ammeter And Voltmeter,Dual Variable Dc Power Supplies,On Board Mosfet And Fet With Resistors To Perform Experiments] , To Study The Input And Output Characteristics And To Find The H-Parameters Of A Bjt For : — (A) C-E Configuration, (B) C-C Configuration, (C) C-B Configuration [Power Supply 1) 0-1V Dc 2) 0-10V Dc.Meters Dc 65Mm Four Dial V, V , Ma Ua/ Ma.Transistor Cl100/ Similar] , Component Development System [Power Supplies On Boards 0-15 V And 0-30 V, 250 Ma Each Variable.Fixed Dc Regulated Power Supplies 15 V/250 Ma And 5 V/250 Ma.Ac Power Supply 15-0-15 V For Rectifier Applications.Various Components On The Trainer Set. ] , Kcl & Kvl Trainer Kit [Two Dc Ic Regulated Power Supplies 0-12 V/150 Ma, Two Mr65 Square/Digital Meters For Voltage & Current Measurement, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Power Cords 230 V, 50 Hz] , Thevenin’S And Norton’S Theorems Trainer Kit [Power Supply 2?3?0?V, Regulated & Short Circuit Proof Variable Dc Voltage Source – 01 No. Fixed Resistance Of Different Values. Dc Voltmeter.Dc Ammeter. Glass Fuse For Short Circuit Protection. On/Off Switch With Indication Light. Patch Cords Suitable To The Terminals With Board For Easy Interconnection.All Above Accessories Will Be Fitted On Bakelite Sheet Fixed On Box.] , Superposition Theorem Trainer Kit [Instrument Comprises Of Two Fixed Output Dc Regulated Power Suppliesof 12V & 5V At 500 Ma Current, Three Moving Coilmeter, Circuit Diagram Printed On The Front Panel & Connections Ofsupplies, Meter & Resistances Brought Out At 4Mm Sockets. ] , Maximum Power Transfer Theorem Trainer Kit [Ammeter 30Ma Dc. Voltmeter 12V Dc. Power Supplies: Dc Supply Ic Regulated 0-12V Dc, 150Ma. Operated On Mains Power 230V, 50Hz +10% Components Are Mounted On The Panels Are: Resistances 2Watts Variable Resistor Voltage Control Through Potentiometer. Fuse For Short Circuit Protection. Patch Cords 4Mm.] , Reciprocity Theorem Trainer Kit [Instrument Comprises Of One Fixed Output Dc Power Supply Of 12V At 300 Ma Current, Two Moving Coil Meters, Circuit Diagram Printed On The Fornt Panel & Connections Of Supplies, Meters & Resistances Brought On Terminals.] , Series And Parallel Resonant Circuit Trainer Kit [Analog Meters: Ammeter 20Ma Ac. Voltmeter 20V Ac. Components Mounted On The Panels Are: 3 Nos. Of Resistors Selected By Rotary Switch. 3 Nos. Of Capacitors Selected By Rotary Switch. 3 Nos. Of Inductors Selected By Rotary Switch.] , Low Pass And High Pass Filter( Rc & Lc) Constant K Type Trainer Kit [Instrument Comprises Low Pass Circuit Rc Type Instrument Comprises Low Pass Circuit Lc Type Instrument Comprises High Pass Circuit Rc Type Instrument Comprises High Pass Circuit Lc Type Instrument Fitted In Highly Shockproof Plastics Box] , T And ? Type Attenuator Trainer Kit [Instrument Comprises Ofdc Ic Regulated Power Supplies 0-15V/150Ma. Two Mr65 Square / Digital / Round Meters For Voltage & Current Measurement. T And Pie Network Provided On The Board. Variable Resistor Using Band Switch Is Mounted On The Board. Instrument Fitted In Highly Shockproof Plastics Box. Sufficient No Of 4Mm Patch Cords For Interconnection Instruction Manual For Student Workbook. Power Cords 230V, 50Hz] , To Study Standing Wave Pattern For A Transmission Line Of Finite Length With: (A) Open Termination, (B) Short Termination, And © Matched Termination. [Transmission Line : Coaxial Cable 100M ( 25M X 4 Nos) Impedance Matching Resistance : 0 To 100 ( 02 Nos ) Test Generator : 1. Sine Wave : 4 Khz To 4 Mhz. 2. Square Wave : 10 Khz. Interconnections : 4 Mm Sockets On All Input / Output Connections. Test Points : 10 On Board Circuit Mimic : Illustrates Functional Blocks For Ease Of Experimentation Power Requirement : 230V 10% 50Hz, 1 Ac. Accessories Provided : I. Set Of Patch Cords. Ii. Bnc To Bnc Cable. Iii. Bnc To Crocodile. Iv. Detailed Instruction Manual.] , Digital Trainer Kit (Experiment 1. -To Verify The Truth Table Of Not, Or, And, Nand, Nor, Xor, X-Nor With Ttl Logic Gates And Cmos Logic Gates. Experiment 2.- To Realize Different Boolean Expressions With Logic Gates. Experiment 3.-To Realize Half-Adder, Full-Adder, Subtractor, Parallel And Serial Full-Adder. Experiment 4-To Design 1’S Complement, 2’S Complement And 9’S Complement Adder-Subtractor.) [Dc +5V , 400Ma; Dc +12V, 250Ma; Dc -12 V, 250Ma, Dc0 To + 30V: Variable 100Ma,Ac Output: 12V-Ct-12V, 150Ma; Logic Data 8-Bit Debounced Set/Clear Ttl Output With Bicolour Led; Clock Generator I Hz To 200Khz Variable & Manual, Ttl & /Ttl(Complement) With Bicolour Led;Logic Probes 8-Bit 3-State Led Display High, Low, High Impedance; Function Generator Sine, Square, Triangle, 1 Hz To 250 Khz;Bread Boards : 3 X 820 Tie-Points; Total Short Circuit Protection From Any To Any Point On Board] , Complete Setup To Implement The Truth Table Of Encoder,Decoder, Multiplexer And De-Multiplexer. [The Trainer Kit Should Be Able To Verify The Truth Tables Of Truth Table Ofencoder,Decoder, Multiplexer And De-Multiplexer.] , Complete Setup To Design/Construct Parity Generator, Checker And Comparator. [Industry Standard Specification To Perform Relevant Experiments. ] , Flip Flop Trainer Kit [Kit For Verification Of Jk, Sr, D, And T Flip-Flop Truth Tables] , Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design / Construct Programmable Up/Down Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design Controlled Shift Register And Study Their Function. [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Study Different Memory Ics [Industry Standard Specification To Perform Relevant Experiments. ] , A/D & D/A Converter Trainer [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Interface Ttl And Cmos Ics. [Industry Standard Specification To Perform Relevant Experiments. ] , 8051 Trainer Kit [Operating Frequency : 10Mhz Crystal,40-Pin Ic Base | 40Pin-Zif Socket,2×16 Char Lcd Display,32 I/O Pins,32Kb-Sram,32Kb-Eeprom.] , Ct-31/51 Or 8031/51 Microcontroller Trainer Kit With Led Display, Usb Interface & Inbuilt Power Supply [Operating At 10/12 Mhz, On Board 8K Ram,8/16K Bytes Of Eeprom,48 I/O Lines,Hexadecimal Keyboard And Six Seven Segment Displays,Rs-232C Interface,Usb Interface] , Ct-31/51Lcdadu8031/51 Microcontroller Trainer With Lcd Display, Usb Interface, Adc, Dac& Inbuilt Power Supply [Trainer Based On 8051/89C52 Microcontroller.On Board 32K Ram.64 K Bytes Of Eeprom.20 X 2 Lcd Display.48 I/O Lines. Onboard Adc & Dac.] , Adc Interface Module [Usb Interface, Adc Module Module 10 Channel 12Bit Ad Sampling Data Acquisition Stm32 Uart Communication Adc Module] , Dac Interface Module [Operating Voltage 2.7-5.5 V. Interface Type I2c. Resolution 12 Bits.] , Lcd Display Module [Display Contents :16 * 2 Characters (5*8 Dots ). Lcd Size :80 X 36 Mm .Lcd Thickness :9.5 Mm.] , Keyboard Interface Module [5X4 Keys Matrix Keyboard. ] , Dc Motor Controller Module [Driver Module : L298n. Motor Supply Voltage (Max.): 46V.Motor Supply Current (Max.): 2A. ] , Stepper Motor Controller Interface Module [Robocraze Stepper Motor(28Ybj-48 Dc 5V 4 Phase 5 Wire) + Uln2003 Driver Board Compatible With Arduino] , Trafic Light Controller Module [Led Traffic Lights Signal Module/Digital Signal Output Traffic Light Module] , Temperature Measurement Module [Electrobot Dht11 Digital Temperature & Humidity Sensor Module For Arduino And Rpi] , Operational Amplifier Trainer Kit ( Ic 741 ) [Inbuilt Variable/Fixed Dc Regulated Power Supplies.Output Voltages : 0-5Vdc (2Nos.) (Variable), +12Vdc (Fixed).Transistor & Components Provided Ic : 741.Transistor : Cl 100 (Npn).] , Active Filter Trainer Kit (Lpf, Hpf, Bpf) [Opamp Based First Order Lpf, Hpf, Bof Trainer Kit (Mi-A14)] , Application Of Ic555 Timer Trainer Kit (Astable & Monostable Mv) [In-Built Regulated Dc Power Supply.On Board Manual Pulse Generator For Triggering The Monostable And Bistable Circuit.Inbuilt Led Output Indicator.Symbols And Diagram Are Printed On Glass Epoxy Pcb.] , Opamp Based Oscillator Trainer Kit ((A) Hartley, (B) Colpitt, (C) Phase Shift, (D) Wein Bridge) [Op-Amp Oscillator Trainer Mi-A13. Frequency 50-60 Mhz.] , Crystal Oscillator Trainer Kit (741 Based) [Industry Standard Specification To Perform Relevant Experiments. ] , Function Generation Kit (Using Icl8038) [Icl8038 Function Signal Generator Sine Triangle Wave Kit Diy Professional K5e8.Uses Icl8038 And High-Speed Op Amp, Higher Accuracy. Low Distortion Sine Wave: 1%.] , Voltage Regulator Trainer Kit (Using Ic723) [0-35V D.C. At 250Ma, Countinously Variable Unregulated Power Supply.D.C. Milliammeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 50Ma And 250Ma.D.C. Voltmeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 10V And 40V.Ic 723 Fitted On Base.Three Potentiometers.] , Function Generator Trainer Kit [Frequency Ranges: 1? Hz To 1?0? Hz, 1?0? Hz To 1?0?0? Hz Fuse:3?5?0? Ma, Slow Blow Automation Grade: Manual Power Supply:Max 2?3?0?V Ac, 5?0? Hz +/- 1?0?%] , Maxwells Bridge Trainer Kit [The Kit Contains A Bridge With Provision For Connections Of Capacitors And An Unknown Inductor. In Built Ac Supply [ 1 Khz And 2 Vpp ] And Dc Supply [ +5 V ] On Board. Two Nos Dial Resistances [ 50 Ohm To 200 Ohm ] And [ 1 Ohm To 11 Ohm ] In Step. A Dc And Ac Null Detector Using Selector Switch. A Dial Type Variable Capacitor [ Range 0.2 Uf Ro 1.2 Uf ] And Six Nos. Unknown Inductors [ Range 1 Mh To 12 Mh ].] , Lvdt Trainer Kit [Excitation Source Built In Ac Source 2.5 Khz Sine Approx. L.V.D.T. In Non Metallic Structure. Micrometer One (For Displacement) Displacement Range 10Mm. Test Points Sockets At Different Places For Signals. Potentiometer Two For Zero & Calibration Adjust Display (Mm) 3.5 Digit Digital Power Supply Ic Regulated Phase Detection Balanced Demodulator Power Supply Short Circuit &Overload Protected Mains 230V/50Hz Ac] , Strain Gauge Trainer Kit [Strain Gauge: 4 Mounted Upon Cantilever 150X3.5X3.5Mm, Stable Dc Voltage For Strain Gauge Bridge, Opamp Based,Precision Instrumentation Amplifier With Variable Gain,Potentiometer For Zero And Calibration Adjust,3.5 Digit Display For Strain/Weight, 230V 50Hz Ac] , Temperature Transducers Kit Using (A) Rtd (Pt-100) (B) Thermistor. [12 - 0 - -12 V 500Ma To Drive Digital Integrated Circuitry. 5 - 0 - -5 V 250Ma To Drive A To D Converter Signal Conditioning And Amplifying :Analog To Digital Converter. Display : 31/2 Digit Led Display Of 200 Mv Fsd Initial Set : Single Turn Potentiometer To Set Initial Temperature ( Room Temperature) Final Set : Single Turn Potentiometer To Calibrate The Instrument ( Max. Temperature) Select : 2 Way Rotary Switch To Select Rtdand Thermistor. Power On : Rocker Switch To Control Power Supply To The Instrument.] , Calibration Of A Single-Phase Energy Meter By Phantom Loading Trainer Kit [Usage/Application: Lab Experiment Connection:4?-Mm Patch Cord Single Phase Automation Grade:Manual Power:2?0?0? W Voltage:2?2?0?-2?4?0? V] , Calibration Of A Voltmeter Using Crompton Potentiometer Trainer Kit [This Trainer Is Supplied Along With Highly Regulated Dc Power Supplies To Operate The Unit. Further To Calibrate Pmmc Meters, Necessary Ratio Boxes Also Provided. Resistors Used In This Unit For Coarse And Fine Are Very Standard Type Made Of Manganin. This Enable The User To Measure The Potential In A Circuit Close To Micro Volts. Necessary Schematic/Wiring Diagram Printed On The Panel To Follow And Conduct Experiments. User Manual And 4Mm Patch Cords Supplied. Accessories Included: Necessary Dc Power Supplies, Ratio Boxes & Galvanometer Are Provided Alongwith The Unit.] , Cro Demonstration Kit [Crt : 6Rectangular Screen With Internal Graphical 8X10 Division (1Div-1Cm) Vertical Deflection Display : Ch1, Ch2, Add, Alt & Chop Deflection Factor : 5Mv/Div To 5V/Div +3%, 1Mv/Div To 1V/Div, +5% (X5), 10 Steps Rise Time : <17.2Ns Maximum Input Voltage : 250 (Dc + Ac Peak Value) When <1Khz (250V, Dc +Ac) Input Coupling : Ac, Dc & Gnd Polarity Selection : + (Ch2 Only) Display Mode : 1, 10 & X-Y Horizontal Deflection Time Base : 0.2Us/Div To 0.2S/Div, 9 Ranges Sweep Expansion : X10 Accuracy : +3% Triggering Mode : Auto, Norm, Tv-V, Tv-H Triggering Source : Int, Line & Ext. Trigger System Auto : 20Hz-20Mhz Norm : 0.5 Div Int, 0.5 Vp-P Ext Tv-H : At Least 1 Div Or 1 Vp-P Input Impedance : 1Mohm X-Y Phase Difference : <3 Degree, Dc-50 Khz Calibration Waveform : Frequency 1Khz 2%,Voltage 0.5 V 1%, Block Diagram Printed On The Top Panel, Power Requirement: 220 Vac +10% , 50 Hz] , Q-Meter Kit Formeasurement Ofq Of Coils. [Inductance Range:199.9Mµh-19.99H Resistance Range (Ohm):19.99O-19.99M? Capacitance Range:199.9P-1.999?F Capacitance Accuracy: ±(1%±2) Digital Lcr Bridge Meter Power:220 Volts/50Hz ±10%] , Spectrum Analyzer Trainer Kit [Industry Standard Specification To Perform Relevant Experiments. ] , Public Address System Trainer Kit [To Test The Performance Of Loudspeaker And Microphone; Power Output: 100W Rms At 10% Thd Pre-Amplifier Output: 200Mv; Line Output: 1V/ 1K?; Input Channels: Mic: 2Nos; Frequency Response : 65 Hz To 15 Khz +/- 3Db Tone Controls : Bass, Treble, Master 1Control; Speaker Outputs : 4 , 8 , 16 , 70-100V Line Matching; Speakers : 2 Nos; Microphones : 2 Nos(Dynamic Microphone)] , Demonstration Kit Of Black & White Tv Trainer [To Learn The Practical Aspects And Faults Which Would Occur Often In The Black And White Tv. All The Fault Switches Are Provided To Conduct Fault And Observe The Output. The Test Points Are Provided To Determine The Voltages At The Different Sections Of The Tv And Observe The Signal Output Of The Various Sections. The Output Is Monitored On A 20” Picture Tube.] , Demonstration Kit Of Colour Pattern Generator For Colour Tv [They Should Be Able To Make Various Patterns, Including Vertical Bar Patterns, Horizontal Bar Patterns, Circle Patterns, 100% White Patterns, Check Patterns, Horizontal Bar Patterns, Vertical Bar Patterns, Color Bar Patterns, Red Color Patterns, Green Color Patterns, Blue Color Patterns,Yellow Color Patterns, Magenta Color Patterns, And Cyan Color Patterns. Learning Materials To Be Included: Theory, Procedure, Reference Results, Etc.] , Demonstration Kit Of Colour Led Tv Trainer [Display Type: Led; Hd Screen Size: 24 Inch (50Cm) Or More; Display Resolution: 1600 X 900 Pixels Or More; Video Interface: Video Input/ Vga, Hdmi And Or Dvi Input; Audio Output Power: 8W X 2; Receiving System: Pal Bg/I/Dk And Ntsc; Channel Coverage: Vhf-2-12, Uhf21-69; Catv (X~Z+2, S11s41) Mains Supply: 110-260V Ac ± 10%, 50/60Hz; Power Consumption: 35W] , Demonstration Kit Of Dth Trainer Kit [Colour Tft Lcd: 5.7” Tft Lcd; Rf Input: 950 - 2150 Mhz; Rf Output: 470 Mhz Two 862Mhz; Video Output: Pal/Ntsc; Uplink Satellite: Insat 4B; Test Points: 34 Nos.; Included Accessories: Mains Cord, Power Supply, Remote, Dish Antenna With Accessories, Lnb] , Demonstration Kit Of Photocopier [Interface Hi-Speed Usb 2.0 Copy Speed Simplex To Simplex Up To 20 Ppm In A4 (21 Ppm In Letter) Scan Method Color Cis Compatibility Twain, Wia Fault-Creating Facilities For Crum, Thermistor, Stepper Motor, Pickup Clutch, Feed Sensor, Width Sensor, Scanner Stepper Motor, Scanner Sensor, And Printer Door. Various Fault Switch With Test Points Provided On-Board.] , Demonstration Kit Of Fully Automatic Washing Machine Trainer Kit [Semi/Fully Automatic Washing Machine Mechanical Controls 30 Minutes Timer, Wash/Spin Control Atleast 6 Liter Capacity Machine Fault Switches For Wash Motor, Spin Motor, Lid Opening, Buzzer Etc All Faults Are Mounted On Pcb With Enclosure] , Demonstration Kit Of Microwave Oven Trainer Kit [Type: Solo; Capacity: >15 Ltr; Power Consumption: 600 Watt Or More: Child Lock And Alarm, Various Test Points] , Demonstration Kit Of Refrigerator [Industry Standard Specification To Perform Relevant Experiments. ] , Demonstration Kit Of Air Conditioner. [Industry Standard Specification To Perform Relevant Experiments. ] , Tdmpulse Code Modulation Trainer Kit [Crystal Frequency: 12/16 Mhz On Board Generators, 1. Adjustable Amplitude Sine Generator Of 500Hz & I Khz (Synchronised) 2. Variable Amplitude Dc Level (2 Nos.) Input Channels: Two Multiplexing: Time Division Multiplexing Modulation: Pulse Code Modulation Sync Signals: Pseudo Random Sync. Code Modulation Error Check Code: Off, Odd, Even, Hamming Operating Modes: Fast 240 Khz Channel (Approx) And Slow I Khz Channel (Approx) Pc - Pc Communication: 2 Channel Via Rs 232 Baud Rate: Selectable From 300 To 2400 Fault Switches : 8 Nos. Through 8 Way Dip Switch For Troubleshooting At Different Blocks Should Include Various Test Points] , Tdm Pulse Code Demodulation Trainer Kit [2 Channel Time Division Multiplexed Pulse Code Modulation Receiver. Fast (240 Khz/Channel Approx) And Slow (1Hz. /Channel Approx.) Mode Of Operation Pseudo Random Sync. Code Generator For Frame Synchronization. Receiver Clock Generation Using Pll. Error Detection Of None, Even, Odd, Hamming. Error Correction Using The Hamming Code Technique None, Even, Odd, Hamming Parity Selections Two Nos. Of 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz. Four Switched Faults For Fault Selection Block Description Screen Printed On Glassy Epoxy Pcb] , Fdm Transmitter / Receiver Kit [Two Variable Modulating (Sinusoidal) Input Channels With Provision Of Voice Inputs Two Dsbsc Modulators For Frequency Band Translation Of Two Test Signals Two Carrier Generators Two Sets Of Audio Input Amplifier One Adder/Transmission Amplifier Two Demodulators Two Low Pass Filters For Smooth Output] , Ask / Psk / Fsk Modulation And Demodulation Kit [The Kit Should Have An Integrated Ask / Psk / Fsk Modulation And Demodulation. Various Functional Block Diagrams Are Provided On-Board For Teaching/Training. Test Points To Visualize The Signals On Oscilloscopes] , Microwave Test Bench (Klystronbased) [Complete Klystron-Based Test Bench Study Of The Characteristics Of The Klystron Tube And To Determine Its Tuning Range, To Determine The Frequency & Wavelength In A Rectangular Waveguide Working On Te 10 Mode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , Microwave Test Bench (Gunn Based) [To Study The V-I Characteristics Of Gunn Diode, To Study The Voice Communication By Using Microwave Test Bench, To Study The Following Characteristics Of Gunn Diode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , 24 Awg Tinned Single Strand Jumper Wire Spool Blue Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Green Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Red Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Black Colour [90 Meter Spool] , Flexible Electric Wire [2 Core, Twisted Flexible, Red And Black, 0.5 Sq Mm Copper Core, 50M Length] , Soldering Wire [Flux Core, Coil Type (Wire Of 100Gm )] , Inductor 1 Mh [8X10 Mm Radial Leaded Power] , Inductor 10 Mh [8X10 Mm Radial Leaded Power] , Led Red, Green, Blue, White Colour. Fifty Numbers Of Each Colour Led. [0.5W, Through Hole Type] , Ic 7400 [Ttl Ic-Quad 2-Input Nand Gate] , Ic 7402 [Ttl Ic-Quad 2-Input Nor Gate] , Ic 7404 [Ttl Ic-Hex Inverter Gate] , Ic 7408 [Ttl Ic-Quad 2-Input And Gate] , Ic 7432 [Ttl Ic-Quad 2-Input Or Gate] , Ic 7486 [Ttl Ic-Quad 2-Input Xor Gate] , Ic 7474 [Ttl Ic-Dual D Positive Edge Triggered Flip-Flop, Asynchronous Preset And Clear] , Ic 7476 [Ttl Ic-Dual J-K Flip-Flop, Asynchronous Preset And Clear] , Ic 7490 [Ttl Ic-Decade Counter (Separate Divide-By-2 And Divide-By-5 Sections)] , Ic 7495 [Ttl Ic-4-Bit Shift Register, Parallel In, Parallel Out, Serial Input] , Ic 74200 [Ttl Ic-256-Bit Ram (256X1)] , Ic 74147 [Ttl Ic Encoder] , Ic 74138 [Ttl Ic 3 To 8 Line Decoder] , Ic74151 [Ttl Ic Multiplexer] , Ic74138 [Ttl Ic Demultiplexer] , Ic 74169 [Ttl Ic Up-Down Counter] , Ic 74180 [Ttl Ic Parity Checker/Generator] , Ic 74Ls83 [Ttl Full Adder With Carry Ic] , Ic 74330 [Ttl Ic-Pla (12 Inputs, 50 Terms, 6 Outputs)] , Ic 4077 [Cmos Ic Xnor Gate] , Ic 4001 [Cmos Ic Nor Gate] , Ic 4011 [Cmos Ic Nand Gate] , Ic 4070 [Cmos Ic Exor Gate] , Ic 4071 [Cmos Ic Or Gate] , Ic 4077 [Cmos Ic Ex-Nor Gate] , Ic 4081 [Cmos Ic And Gate] , Ic 4093 [Cmos Ic Nand Gate] , Ic74ls47 [Bcd To 7-Segment Decoder/Driver Ic (7447 Ic) Dip-16 Package] , Lts542 [7-Segment Display - Common Anode] , Lts543 [7-Segment Display - Common Cathode] , Ic Dac0808 [Dac0808 8-Bit Digital To Analog D/A Converter Ic Dip-16 Package] , Ic Adc0809 [Adc0809 8-Bit A/D Converter With 8-Channel Multiplexer Ic Dip-28 Package] , Ic723 [Voltage Regulator Ic Input Voltage Up To 40V Output Voltage Adjustable From 2 To 37V Positive Or Negative Supply Operation Series, Shunt, Switching Or Floating Operation Output Current To 150Ma Without External Pass Transistor Adjustable Current Limiting] , Icl8038 [Function Generator Ic Wide Frequency Range - 0.001Hz To 300Khz Variable Duty Cycle - 2% To 98% High Level Outputs - Ttl To 28V Simultaneous Sine, Square, And Triangle Wave Outputs] , Ad633 [Analog Multiplier Ic 4-Quadrant Multiplication Low Cost, 8-Lead Soic And Pdip Packages Complete—No External Components Required Laser-Trimmed Accuracy And Stability Total Error Within 2% Of Full Scale Differential High Impedance X And Y Inputs High Impedance Unity-Gain Summing Input Laser-Trimmed 10 V Scaling Reference] , Lm566 [Vco Ic Wide Supply Voltage Range: 10V To 24V Very Linear Modulation Characteristics High Temperature Stability Excellent Supply Voltage Rejection 10 To 1 Frequency Range With Fixed Capacitor Frequency Programmable By Means Of Current, Voltage, Resistor Or Capacitor] , Ic Ne555 [Ne555 Timer Ic Dip-8 Package, Pack(Set) Of 30 Ics] , Ic 741 Op-Amp (Dip) [741 Ic - Dip Package - General Purpose Op-Amp Ic, Pack(Set) Of 50 Op-Amps] , Transistor 2N3904 [Pack (Set) Of 20 Transistors] , Transistor Bc107b [Pack (Set) Of 20 Transistors] , Diode 1N4007 [Pack (Set) Of 50 Diodes] , Fet- Bfw10 [Pack (Set) Of 50 Field Effect Transistors] , Zener Diode 5.6V, 1W [Pack (Set) Of 20 Zener Diodes] , Potentiometer 1 K?, 10 K?,100 K? Power Rating: 1W [20 Nos Of Each Value] , Wire Stripping Pliers, 6 Inch Long [Stainless Steel, Rust Resistant.] , Long Nose Mini-Pliers [Stainless Steel, Rust Resistant.] , Resistor 33O, 56O, 68O, 82O, 100O, 120O, 200O, 220O, 270O, 330O, 390O, 470O, 680O, 1K?,1.5K?. Maximium Power Rating 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Resistor 2.2K?, 2.7K?, 3K?, 4.7K?, 5.6K?, 6.8K?, 8.2K?, 10K?, 20K?, 36K?, 56K?, 68K?, 100K?, 470K?, 1M?, 2M? Maximium Power Rating: 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Disk Ceramic Capacitor Of Values 220 Pf, 0.01 ?F, 0.024?F, 0.1?F, 0.24?F [Pack(Set) 25 Nos Of Capacitors For Each Valueh] , Disk Ceramic Capacitor Of Values 10?F(63V), 100?F, 220?F, 470?F(50V) [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Polypropylene Capacitor Of Values 0.001 ?F,0.01 ?F, 0.1 ?F, 0.22 ?F [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Tantalum Capacitor 10 ?F (25 V) [Pack(Set) Of 25 Capacitors] , Incandescent Bulb, 40W, 100W, 200 W [With Tungstenfilament And B22 Connector]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 10
West Bengal View Result →
41.
Health and Family Welfare #11154079 AOC
Bids Are invited for Drugs And Consumable Tab Diclofenac 50 Mg , Tab Cetirizine 10 Mg , Tab Paracetamol 500 Mg , Tab Paracetamol 650 Mg , Cap Omeprazole 20 Mg , Tab Ibuprofen 400 Mg , Tab Ibuprofen 800 Mg , Tab Atenolol 50 Mg , Tab Atenolol 25Mg , Ceftriaxone 1 Gm , Cefotaxime 1 Gm , Pantoprazole 40 Inj , Inj Pheniramine Maleate , Syringe 2Ml , Syringe 5Ml , Syringe 10Ml , Autoclave Indicator Tape , Glutaraldehyde Solution 5 Lts , Micropore Tape 1 Inch , Inj Dopamine , Inj Iron Sucrose , Cefixime Dt 200 Mg , Amikacin 500 Mg , Paracetamol 250 Mg Syp , Paracetamol 125 Mg Syp , Iv Metronidazole 100 Ml , Sodium Chloride 0 Point Nine Percent 100 Ml , Tab Metronidazole , Tab Norfloxacin , Tab Ranitidine , Tab Dicyclomine , Tab Domperidone 10Mg , Non-Sterile Gloves 1X1 Size L , Oxygen Mask , Iv Cannula 20G , Iv Cannula 24G , Catgut 2 Point 0 , Nebulization Mask Adult , Tab Etofylline Theophylline , Ecg Gel 5 Kg , Sodium Chloride 0 Point Nine Percent 500 Ml , Dns , Rl , Tetanus Toxoid , Bmi Covers Blue , Bmi Covers Red , Bmi Covers Black , Bmi Covers Yellow , Inj Hydrocortisone 100 Mg , Rubber Sheet 2Mtr , Bed Pan Plastic , Inj Pentazocine , Promethazine , Needle Holders , Hydrogen Peroxide , Silver Sulfadiazine Ointment 250Gm , Povidone Iodine Solution 2Ltr , Long Artery Forceps Straight And Curved , Short Artery Forceps Straight And Curved , Mosquito Forceps , Tongue Depressor , Cord Cutting Scissors , Suture Removal , Straight Scissors , Toothed Forceps , Non Tooted Forceps , Bandage Than 1Kg , Nitrofurantoin 100Mg , Sterile Disposable Iv Infusion Set , Poly Catheter 16F , Poly Catheter Pediatric , Weighing Machine Adult Manual , Weighing Machine Pediatric Manual , Bed Sheet Single With Pillow Cover , Bed Blanket , Syp Salbutamol 100Ml , Pantoprazole 40 Mg Tab , Insulin 30 Bar 70 , Test Tube Plain , Clot Activator Tube , Edta K3 , Sodium Citrate Tube , Tips Small , Tips Big , Widal Kit , Sulphosalicylic Acid , Urine 2 Parameter Stips , Formalin Tab , Green Dustbin 45 Ltr , Inj Ferric Carboxymaltose 500Mg , Iv Paracetamol 100 Ml , Ceftriaxone 1 Gm , Diclofenac 3 Ml , Paracetamol Drops , Inj Betamethasone , Salbuatamol Respiratory Solution 15Ml , Metronidazole Iv 100 Ml , Folic Acid 5Mg Tab , Atorvastatin 10Mg Total Quantity : 29819
Contract Date: Ref. Documents Contract Value : ₹ 3.08 Lakh
Government Departments No of Bidders 5
Karnataka View Result →
42.
Railways #11153458 AOC
Supply Of 2026- 27 (ami no. 32.74) multistix for urine chemistry,%u22659 parameter i.e-protien, glucose, ph, bilirubin, nitrite, blood, ketone, urobilinogen, sp.gravity. pack size - 100 strips/ pack, note- the firm supplying the multistix strips will provide a compatible automated urine chemistry analyser having a through put of >100 tests per hour & with facility of continuous loading of strips. the firm should also supply the printing paper rolls (total quantity 100 rolls) & urine chemistry control(s) every month for quality control of the results. the equipment will be maintained by the firm till the utilization of the multistix supplied. the firm will have to provide a backup analyser (of the same inventory) in case of break down of the equipment for more than 72 hours , 2026- 27 (ami no. 32.74) multistix for urine chemistry. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
Contract Date: May 22, 2026 Contract Value : ₹ 4.55 Lakh
Government Departments No of Bidders 1
Delhi View Result →
43.
Public Administrative Department #11140891 Technical Bid
group - c - packing materials , biscuit packing roll food grade packing printed rolls - sample required approval before delivery (width 14, and weight of each roll must be from 18-20 kgs. only (not above and not less weight) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo/designs/colors , candle prakash brand (each candle weight 33-35 gms. , carry bags in three sizes : 14x20, 18x20, 9x12, thick (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo/designs/colors , corrugated box size : 12 x 12 x 9 (five ply:180-200 gsm) sample required approval before delivery. (note : lab test will be carried out on the cost of supplier from govt. authorised laboratory in case if required specification differes) , corrugated box size : 15 x 12 x 13 (five ply:180-200 gsm) sample required approval before delivery. (note : lab test will be carried out on the cost of supplier from govt. authorised laboratory in case if required specification differes) , corrugated box size : 19 x 13 x 13 (five ply:180-200 gsm) sample required approval before delivery. (note : lab test will be carried out on the cost of supplier from govt. authorised laboratory in case if required specification differes) , fancy card box - cake rusk multi color laminated fancy box , die cutting & pasting , size : 130mm x 72 mmx100mm - sample required approval before delivery printed with approved logo/designs/colors , fancy card box - eggless cake rusk multi color laminated fancy box , die cutting & pasting , size : 45mm x 103 mmx142mm - sample required approval before delivery printed with approved logo/ designs/colors , fancy card box - marodi multi color laminated fancy box , die cutting & pasting , size : 160mm x 150 mmx 60mm - sample required approval before delivery printed with approved logo/ designs/colors , fancy card box - spices laminated multi color printed boxes (9 types) for 100 gm packing spices with die cutting & pasting- sample required approval (environment friendly, must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo/ designs/colors , fancy card box - sweet fen multi color laminated fancy box , die cutting & pasting , size : 135mm x 125 mmx 65mm - sample required approval before delivery (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo /designs/colors , fancy namkeen printed packing rolls transparent/ colored packing printed rolls to be used in packing machine of 100 gm namkeen, food grade (print according to namkeen variety total 12 variety of namkeen)- sample required approval before delivery (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo /designs/colors , fancy namkeen printed pouch regular namkeen pouch 220mm x 110 mm (total 5 types )- sample required approval before delivery (environment friendly, must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo /designs/colors , fancy namkeen printed pouch small namkeen pouch 110mm x 95mm (total 5 types) - sample required approval before delivery (environment friendly, must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo /designs/colors , food grade plastic round box for cookies packing food grade, weight = 50 - 52 gm. per pc.(size in mm dia = 157 insight x 160 outside, height = 68 with lid ) - sample required approval before delivery (environment friendly, must be within the permitted parameters of plastics notified by the state or central government) , food grade plastic tray (biscuit packing) food grade, weight = 13 - 15 gm per pc. (size in mm length = 145 insight x 155 outside, width = 95 insight x 105 outsight, height = 40) -sample required approval before delivery (must be within the permitted parameters of plastics notified by the state or central government) , food grade plastic tray (petha packing) food grade, weight = 11 - 13 gm. per pc .(size in mm length = 170 insight x 190 outside, width = 122 insight x 138 outsight, height = 40)-sample required approval (must be within the permitted parameters of plastics notified by the state or central government) , food grade plastic tray (sweets packing) food grade, weight = 13 - 15 gm. per pc .(size in inches length = 7 width = 5, height = 2)-sample required approval before delivery (must be within the permitted parameters of plastics notified by the state or central government) , food grade plastic tray (sweets packing) food grade, weight = 17 - 19 gm. per pc .(size in inches length = 7 width = 5, height = 2.5)-sample required approval (must be within the permitted parameters of plastics notified by the state or central government) , food grade polythene (printed as per sample crunch rusk) food grade, thick polythene with printing as per requirement in sizes 14”(height) x 7.5(width) x 2 both side- sample required approval before delivery (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo & design , food grade polythene food grade, 200 gauge polythene with printing as per requirement in (sizes 8x16- bread) (8”x16”- suji rusk) (8”x10”- biscuit pouch & sweet fen) (4”x5”-cake muffin) (8”x12”-marodi) (6x5- brownee) (20x 13-biscuit 2 kg.) (10x7-cake rusk, eggless, wafer), (7x4- 100 gm spices) (18x 8- buns 12x8 sweet buns) sample required approval (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo /designs/colors , food grade polythene for packing of bread food grade, 150 gauge polythene with printing as per requirement in sizes (10”x 8”-bread) (17”x 8”-bread), (14”x 8”- bread), (16”x 8” - bread) sample required approval before delivery (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , food grade polythene for packing of mango khatai (printed as per approved sample) food grade, size 9 x 10- (for mango, chocolate, khatai, marble and fruit cake) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo /designs/colors , food grade polythene for packing of muffin/cake (printed as per sample) food grade, size 5 x 4 - sample required approval (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo /designed/colors , paper mold burn proof in oven for marble and fruit cake (sample required approval before delivery) (size upper length : 17.5cm, upper width : 9cm, height 4.5cm) (base length : 15cm, base width : 6cm) fancy two ply approximate weight 9-10 gram per piece , paper mold burn proof in oven for muffin cake (sample equired approval before delivery) , plastic bottle for 500 ml. glass cleaner transparent bottle complete bottle+cap with spray pump+approed logo printed sticker both side (as per sample required approval before delivery at tihar baking school, superfine quality sticked with gumming) (weight 48-50 grams each) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , plastic bottle for 500 ml. toilet cleaner bottle complete set plastic bottle + cap + inner + tj`s printed sticker both side(100% virgin bottle) (as per sample required approval seen at tihar baking school) (weight 42-45 gms.) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , plastic bottle for five liter floor cleaner transparent bottle complete bottle + inner + bottle cap with carrying handle + tj`s printed sticker (as per sample required approval before delivery seen at tihar baking school ) (superfine quality sticker with gumming)( weight 108-112 gms.) (environment friendly, must be within the permitted parameters of plastics notified by the state or central government) , plastic bottle for one liter floor cleaner transparent bottle complete bottle + inner + bottle cap + tj`s printed sticker (as per sample required approval seen at tihar baking school) (superfine quality sticker with gumming) (weight 32-35 gms.) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , plastic crates for bread heavy duty first grade plastic blue color weight minimum 2.200 kgs. size 25.5 length, 17 width, 1 feet depth (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , plastic laminated film pouches -spices multi color laminted film pouches for spice 200 gms packing ( 12 mic. pet./12 mic. met. pet. /50 mic. poly nt) size 300 mm x 270 mm(food grade) - sample required approval before supply (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , plastic laminated film pouches -spices multi color laminted film pouches for spice 500 gms packing ( 12 mic. pet./12 mic. met. pet. /50 mic. poly nt) size - 370 mm x 230 mm (food grade , sample rquired approval (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , plastic laminated film pouches -spices multi color laminted film pouches for spice 100 gms packing ( 12 mic. pet./12 mic. met. pet. /50 mic. poly nt) size 7 x 4 (food grade) - sample required approval before delivery (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , printed tape 2 - brown tape - printed with approvel logo (50 mtr. roll) a1 grade/superior quality -sample required approval before delivery (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , pvc big container for supply of bread big size weight 1.200 to 1.220, length 18 width 14 and depth 9.5 with air tight lid first grade / food grade fulfilling fssai / bis standards (environment friendly, must be within the permitted parameters of plastics notified by the state or central government) , pvc small container for supply of biscuit small size weight 360-370 grams, length 13 width 9.5 and depth 6 with air tight lid first grade / food grade fulfilling fssai / bis standards (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , soft paper nepkins velvet touch, a1 grade/superior quality (sample required approval before delivery) , stickers multi color laminated stickers / self adhesive size -3x4 , - sample required approval before supply (for wafers/potato chips) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , stickers multi color laminated stickers self adhesive size -18.5x1.8 + round multi colour sticker , - sample required approval before delivery (for eggless fruit & nut cake) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo , stickers multi color laminated stickers self-adhesive size -3.5x3 , - sample required approval before supply (for petha, anggori petha, bundi laddoo, besan laddoo, gulab jamun, namakpara, sakkarpara, balushahi, round kachori, dry samosa, coconut laddoo, buns etc.) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo & designs , stickers multi color laminated stickers self-adhesive size -9.5x1.6 , - sample required approval before delivery (for mango+chocolate khatai) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo & designs , stickers multi color laminated stickers, self-adhesive size -3.5x5 , - sample required approval before supply (for all type 250 gm bicuit box) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo & designs , stickers multi color transparent stickers , self- adhesive size -3x4 - sample required approval before supply (for cake rusk and eggless cake rusk) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo & designs , stickers single color sticker self adhesive size 3x4 - sample required approval before supply (for variety of jail diet biscuits) (must be within the permitted parameters of plastics notified by the state or central government) printed with approved logo & designs
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Delhi View Result →
44.
Railways #11133888 AOC
Supply Of pvc tapes blue colour , pressure sensitive adhesive plasticized pvc tapes blue colour specification s:golden parameters:1)length of the tape:10mtrs.2)isi mark:yes.3)width of the tape:19m m.4)internal diameter of the cores on which the tape is rooled:20mm.5)availability of ty pe test report from central govt:nabl:ilac accredited lab to prove conformity to the specifications:yes/no. additional parameters:1)colour of the tape:blue.2)thickness of t he tape:0.13mm.3)the length shall be marked on each roll.4)parameters like date of man ufacturing,expiry date,thickness & length shall be indicated on each roll.5)the tape sh all be conforming to is:7809 latest.6)the expiry date shall be minimum of 10 months fro m the date of supply. ]
Contract Date: May 21, 2026 Contract Value : ₹ 11,092
Government Departments No of Bidders 1
Karnataka View Result →
45.
Defence #11117617 AOC
Tender For Provision Of Training Shed And Pt Shed At Varanasi; Design, fabrication, supply and erecting, Pre-engineered building steel structure/LGSF made from 345 Mpa high strength Hot rolled paletes and factory produced zincalume cold rolled light gauge steel zincalume frame (1 mm BMT)for provision oftraining and PT Sheds of size 72 metre x 18 metre x7.95 metre height from FFL to bottom of truss using 0.45 mm base metal thickness, pre-painted 0.50 mm corrugated galvalume aluminium zinc coating (AZ-150 GSM) aluminium zinc alloy coated colour having tensile strength of 550Mpa as in roofingfixed with self tapping screws including S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.60 mm thick (AZ not less than 150) of colour having tensile strength of 550Mpa as in ridge/valley gutter roof covering/cladding to wall fixed with self tapping screws, (factory made valley gutter, shape and size directed by Engineer-in Charge including supply of bolts, gutter bolts, screws, washer, pipe nails distance pieces, plug, holder bats for pipe and all jointing materials, down take pipe, downspout pipe and metal clamp of appropriate size and shape and LGSF structure with brick work in CM 1:4 onas per mentioned in architectural drawing all as specified with following design parameters all as specified and vetted design and drawing by any IIT/NIT and approved by Chief Engineer Lucknow Zone with permanent specification complete all as specified and as shown on drawing:-(i) Frame type Pre-Engineered Building (ii) Size of training and PT shed as perarchitectural drawing (iii) LGSF structure with 1 mm to 2.5 mm thick(iv) Anti-corrosion treatment and painting as per IS -1477 Part 1 & 2 .(v) PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including form work in base of footing.(vi)RCC work M-30 in footing, plinth beam & Stair case/steps as per approved mix design and as per IS:9103(vii)All necessary civil works for setting for super structure layout, excavation, back filling, removal of surplus soil, RCC foundation/footing, plinth beam, RCC sitting step with granite finish including bull nosing finish & Stainless steel railing complete.Note : (i) Design parameters of PEB structure is attached as appendix ‘A’ (ii) Following items mentioned under srl no 1.01 to1.13 here-in after shall also be included in lump sum rate quoted against Srl item No 1 of BOQ. 2 Site clearance/site developments 3 Anti termite treatment 4 All primary structural components should be confirmed to IS: 2062 E-350 BR, Having a minimum tensile strength of 490 MPs and pass physical & Chemical tests stipulates therein 5 Purlins and side girt membersshall be made from cold Formed Sections, Confirming to IS : 811, having a minimum tensile strength of 345 MPs. The sheets used for cold forming sections shall confirm to IS : 1079, 2009 quality HR3 6 Permanently colour coated high tensile steel sheet havingminimum base metal thickness of 0.45mm (i.e excluding Aluminium -Zinc/galvanizing & colour coating thickness) & minimum Yield strength of 550 Mpa, coated with 55% Al-Zn alloy @ 150 g/Sqm as per ASTM A792M; Color coated with total minimum thickness of 40 microns (nominal) comprising of Silicon, Modified polyester (SMP with silicon content of 30% minimum) paint or super Polyester paint of minimum 20 microns (nominal) Dry Film Thickness (DFT) on exposed side over 5 microns (nominal) primer coat and 10 microns (nominal) approved colour Epoxy paint on other side over 5 microns (nominal) primer coat as per ASTM A755M 7 Kota stone flooring shall be 18 to 20 mm thick machine cut and polished at site after fixing (Mirror polish/granite polish). Size of Kota stone slabs used in floors shall be not less than 500 mm x 500mm.Kota stone slab shall be laid over 20mm thick screed in CM (1:6) over 100 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate over rammed earth. Jointing shall be with grey cement mixed with pigment to match the shade of Kota stone slab. The floor shallachieve mirror finish surface. 8 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as inplinth protection & Saucer drain. Plinth protection surface finishedeven and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) 9 Stainless steelrailingwith SS hand rail pipes grade 304 as perarchitectural drawing shall be provided. 10 10 to12 mm thick ready mix plaster on internal surface and external surface of wall. 11 Preparation of newly plaster surface of wall and applying two coats of synthetic enamel paint over a coat of primer on internal and external surface of wall. 12 Ramp provided same as per flooring specification 13 PAINTING SCHEME FOR STRUCTURAL STEEL WORK:(a) Soap paint :- One coat of inorganic zinc silicate primer-75 microns(b) Soap paint :- One coat of polyurethane paint -30 microns(c) Site paint :- One coat of polyurethane paint- 30 microns (after erection & fixing work) 14 Applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer on other than structural steel surface 15 Design, fabrication, supply and erecting, Pre-engineered building steel structure/LGSF made from 345 Mpa high strength Hot rolled paletes and factory produced zincalume cold rolled light gauge steel zincalume frame (1 mm BMT)for provision oftraining and PT Sheds of size 36 metre x 12 metre x 7.95 metre heightfrom FFL to bottom of trussusing 0.45 mm base metal thickness, pre-painted 0.50 mm corrugated galvalume aluminium zinc coating (AZ-150 GSM) aluminium zinc alloy coated colour having tensile strength of 550Mpa as in roofingfixed with self tapping screws including S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.60 mm thick (AZ not less than 150) of colour having tensile strength of 550Mpa as in ridge/valley gutter roof covering/cladding to wall fixed with self tapping screws, (factory made valley gutter, shape and size directed by Engineer-in Charge including supply of bolts, gutter bolts, screws, washer, pipe nails distance pieces, plug, holder bats for pipe and all jointing materials, down take pipe, downspout pipe and metal clamp of appropriate size and shape and LGSF structure with brick work in CM 1:4 onas per mentioned in architectural drawing all as specified with following design parameters all as specified and vetted design and drawing by any IIT/NIT and approved by Chief Engineer Lucknow Zone with permanent specification complete all as specified and as shown on drawing:-(i) Frame type Pre-Engineered Building (ii) Size of training and PT shed as perarchitectural drawing (iii) LGSF structure with 1 mm to 2.5 mm thick(iv) Anti-corrosion treatment and painting as per IS -1477 Part 1 & 2 .(v) PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including form work in base of footing.(vi)RCC work M-30 in footing, plinth beam & Stair case/steps as per approved mix design and as per IS:9103(vii)All necessary civil works for setting for super structure layout, excavation, back filling, removal of surplus soil, RCC foundation/footing, plinth beam, RCC sitting step with granite finish including bull nosing finish & Stainless steel railing complete.Note : (i) Design parameters of PEB structure is attached as appendix ‘A’ (ii) Following items mentioned under srl no 2.01 to2.13 here-in after shall also be included in lump sum rate quoted against Srl item No 2 of BOQ. 16 Site clearance/site developments 17 Anti termite treatment 18 All primary structural components should be confirmed to IS: 2062 E-350 BR, Having a minimum tensile strength of 490 MPs and pass physical & Chemical tests stipulates therein 19 Purlins and side girt membersshall be made from cold Formed Sections, Confirming to IS : 811, having a minimum tensile strength of 345 MPs. The sheets used for cold forming sections shall confirm to IS : 1079, 2009 quality HR3 20 Permanently colour coated high tensile steel sheet havingminimum base metal thickness of 0.45mm (i.e excluding Aluminium -Zinc/galvanizing & colour coating thickness) & minimum Yield strength of 550 Mpa, coated with 55% Al-Zn alloy @ 150 g/Sqm as per ASTM A792M; Color coated with total minimum thickness of 40 microns (nominal) comprising of Silicon, Modified polyester (SMP with silicon content of 30% minimum) paint or super Polyester paint of minimum 20 microns (nominal) Dry Film Thickness (DFT) on exposed side over 5 microns (nominal) primer coat and 10 microns (nominal) approved colour Epoxy paint on other side over 5 microns (nominal) primer coat as per ASTM A755M 21 Kota stone flooring shall be 18 to 20 mm thick machine cut and polished at site after fixing (Mirror polish/granite polish). Size of Kota stone slabs used in floors shall be not less than 500 mm x 500mm.Kota stone slab shall be laid over 20mm thick screed in CM (1:6) over 100 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate over rammed earth. Jointing shall be with grey cement mixed with pigment to match the shade of Kota stone slab. The floor shallachieve mirror finish surface. 22 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as inplinth protection & Saucer drain. Plinth protection surface finishedeven and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) 23 Stainless steelrailingwith SS hand rail pipes grade 304 as perarchitectural drawing shall be provided. 24 10 to12 mm thick ready mix plaster on internal surface and external surface of wall. 25 Preparation of newly plaster surface of wall and applying two coats of synthetic enamel paint over a coat of primer on internal and external surface of wall. 26 Ramp provided same as per flooring specification 27 PAINTING SCHEME FOR STRUCTURAL STEEL WORK:(a) Soap paint :- One coat of inorganic zinc silicate primer-75 microns(b) Soap paint :- One coat of polyurethane paint -30 microns(c) Site paint :- One coat of polyurethane paint- 30 microns (after erection & fixing work) 28 Applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer on other than structural steel surface 29 INTERNAL ELECTRIFICATIONM&L for point wiring completeforOne light/Fan/Exhaust Fan/Bell point/ Bldg Security Light / Industrial wall mounting fancontrolled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 25 mm in roof / floor slab and ceiling, pressed GI concealed terminal modular boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including suitable cover plate of any module including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :-(i) In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.(ii) Height of socket should be 1.2m above from FFL(iii) Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost. 30 M&L for Point wiring completeforone 5 Pin 5 Amp switch Socket outlet point on an independent board, with PVC insualted and unsheathed FRLSH CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall / roof / floor slab and ceiling, pressed GI concealed terminal modular boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :-(i)In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.(ii) Height of socket should be 1.2m above from FFL 31 M&L forPoint wiring completefor power point controlled by oneswitch with PVC insualted and unsheathed FRLSH cable 2.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 25 mm in roof /wall/ floor slab and ceiling, suitable for modular switch with modular metal flush box with inner and outer cover plate & frame etc of requied colour complete, including 2.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :- In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.One circuit controlled by max one points only. 32 S&F Switch piano, flush type 5 Amps single pole, one way complete all as specified and directed. 33 S&F Socket outlet, flush type 2 in 1, 5 pin, 6 Amps, multi-purpose complete all as speci-fied and directed. 34 S&F Switch piano, flush type single pole, one way 16 Amps complete all as specified and directed. 35 S&F Socket outlet, flush type 2 in 1, 5 pin, 5 and 16 Amps, multipurpose complete all as specified and directed. 36 S&F ceiling rose two to three terminal, complete all as specified and directed. 37 S&F BLDC type air circular wall mounting fan 750mm Sweep, single phase 230 V AC, 1440 RPM, air delivery CMM, power consumption 250 watt, with string, 3 speed choice colour mate, 5 star rating & ISI marked alongwith complete accessories and connecting up the fan to ceiling rose incl PVC insulated 3 core 23/0.0076 copper cable & suitable size of flexible cord with plug top from ceiling rose to wall mounted fan arrangement on pillar / wall is deemed under quoted item rate, complete all as specified and directed 38 S & FLED wide beam optics High Bay Light 100 Wdaylight 150 lum/Wwith PDC housingsuitable for ceiling (surface/suspended) rated aluminium housing indoor type with all fixing arrangement, complete all as specified and directed. 39 S&F LED Building security light fitting 35 Watt with aluminum pressure die cast housing, high purity PC Fresnel diffuser with silicon gasket for IP-65 protection, power consumption <20 W (35W) & luminaire lumen >2500 lm and system efficiency > 120 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers, complete all as specified and directed. 40 S & F MCB DB vertical type 4-way VTPN sheet metal enclosures 415 V with 200 Amp fully insulatedstandard copper Bushbar for each phase & sourrounded with neutral Bars & two common neutral bar, two earth bar incl cable ties fo cable management suitable for housing MCCB/TPN 415 V as incommer IP-54 protection with metal doors all enclosed on standard steel sheet flush mounted type double door factory fabricated complete without MCB & MCCB but with enclosure blank plate, complete all as specified and directed. 41 Supply and fixing MCB DB single pole pole with neutral sheet metal enclosure double door type, 240 volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standardsteel sheet flush mounting type factory fabricated powder coated complete without MCB and with enclosure blank plates for unused way suitable for 12- way ISI marked, complete all as specified and directed. 42 Supply and fixing MCB DB single pole pole with neutral sheet metal enclosure double door type, 240 volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standardsteel sheet flush mounting type factory fabricated powder coated complete withoutMCB and with enclosure blank plates for unused way suitable for 8- way ISI marked, complete all as specified and directed. 43 S&F MCB SPN 32 Amps B series, 10 KA-240 Volts, AC ISI marked, complete all as specified and directed. 44 S&F MCB single pole 6 to 32 Amp rating C Series,10 KA240 Volts, AC50 Hz , ISI marked, complete all as specified and directed. 45 S&F MCCB 415 Volts AC, with 100 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCCBand with enclosure blank plates for unused way suitable for 4 way, complete all as specified and directed. 46 M&L for submain wiring with two single core 4 sqmm copper conductor FRLSH, PVC insulated, multistranded, unsheathed cable ISI marked drawn in PVC conduit not less than 25 mm dia medium grade ISI marked concealed in wallsurface / ceiling for sub main connection including 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connection to earth dolly, complete all as specified and directed.Note:- Two single core 6 sqmm copper conductor for phase / neutral, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit. 47 M&L Earthing complete with galvanised mild steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using GI earth wire 4 mm dia as earth electrode connected to bolts, nuts, check nuts and washers of GI or steel etc at one end and connected to equipment at another end.GI earth wire encased in and including 15 mm dia GI light grade pipe from upper end of earth plate upto equipment 20 dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, test point, GI funnel with wire mesh fixed on water pipe PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pit chamber and RCC pit cover slab of 50 mm thick precast RCC (1:1.5:3) type A-1 duly reinforced with MS TMT bars 8 mm dia @ 150 mm c/c both ways with 10 mm dia MS round baras in lifting handles, excavation earth work including laying the GI pipe concealed in floor/wall all as described in electric plate no 3 of SSR part I complete all as specified and directed and testing on completion. Note:- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.(ii) Earthing wire beyond 7.5m shall be measured and paid separately. 48 B&R WorkM & L One closed side panel of ACP Sheet with framed Mild steel structure at one side of shed with the raised platform arrangement of size12m x 6m of brick work and Tile/marble flooring for Yoga / PT Shed, complete all as specified and directed. 49 M & L for Design, fabrication ,supply & erection of pre-engineered steel building incl civil works inside shed for One store Room of dimension 5 m x 5 m, complete all as specified and directed. 50 Material and Labour for 08 nos Rope Gallows made up of framed mild steel structure fixed to walls/floors with sliding arrangement which can be slided to one side when not in use with 5 ropes to be hung from each rope gallows including painting with primer, complete all as specified and directed. 51 Material and Labour for 04 nos beam bars made up of framed mild steel structure fixed to walls/ floors to be placed at one side of edge including painting with primer, complete all as specified and directed. 52 Material and Labour for 20 nos chin up bars made up of framed mild steel structure fixed to walls/ floors at 2.4m height fixed at one side of edge of shed including painting with primer, complete all as specified and directed. 53 Supply and fixing MS grill bars all around the shed, complete all as specified and directed. 54 EXTERNAL ELECTRIC SUPPLYSupply,installation and testing of factory made,CPRI Approved cubical outdoor (Kiosk) type feeder pillar box 415 volt, 4 wire, AC 50 Hz, made out of 3.15 mm thick CRCA sheet ,weatherand vermin proof powder coating finish bothside(interior & exterior) for outdoor mounting withhaving degree of protection as per IP-56 complete factory lock two earth terminal suitable cable gland for all incoming and outgoing and removable neutral link,Both Side openable double door Indicating light LED type RYB - 01 Set,Ammeter-01, Voltmeter-01, connecting strip/solid conductor brought out to cable chamber brass/copper nut, bolts/washer etc including grouting of feeder pillar box 60 cm above ground level including suitable size angle iron stand made up of65 x 65 x 6 mm welded on all the four corner embedded in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) upto 30 cm includingexcavation and earth work complete with following asseccories:-(a) copper insulatd busbar high conductivity 400 Amp rated 4 phase including neutral bus bar complete - 01 No.Incoming :-(b) MCCB4 -pole 160 Amp make-L & T,415 Volt,breaking capacity 36 KA,50 HZ with thermal magnetic release - 01 No.Outgoing :-(c)MCCB 4 - pole 125 Ampsbreaking capacity 25 KA, 50 HZ- 02 Nos. (d)MCCB 4 - pole 63 Ampsbreaking capacity 25 KA, 50 HZ- 01 No. 55 M&L for bus bar box of sheet metal 3 mm thick powder coated, having 4 Nos. aluminium bus bar of rating 200 Amp mounted on insulator including 01 No. of MCCB 4 pole 63 Amp 415 volts with thermal magnetic release as incomer, breaking capacity 25 KA inside the box and suitable fixing arrengement like flat iron clamp of size 25x3mm with hinged cover & locking arrangementincluding grouting of feeder piller box 60 cm above ground level by providing 90 cm long angle iron of size 40 X 40 X 6 mm welded on all the four corner embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete duly painted with two coat of synthetic enameled paint over a coat of red oxide primer fixed in repair outdoor type duly fitted oncomplete all as directed by Engineer-in-charge. 56 Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable end termination heat shrink type joint complete with jointing material & accessories suitable for 3.5 core XLPEcable of size 16 sqmmto 35 sqmminsulated armoured aluminium cable complete all as specified and directed. 57 Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable end termination heat shrink type joint complete with jointing material & accessories suitable for 3.5 core XLPEcable of size 50 sqmmto 95 sqmminsulated armoured aluminium cable complete all as specified and directed. 58 Supplying ,laying, commissioning & testing 70 Sq.mm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 59 Supplying ,laying, commissioning & testing 50 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including takingout old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 60 Supplying ,laying, commissioning & testing 35 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cable,complete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 61 Supplying ,laying, commissioning & testing 25 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 62 Excavation in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth;for laying of cable, foundation, etc, or for shafts, wells, cesspits, manholes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil,complete all as specified & directed. 63 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm,complete all as specified & directed. 64 Removing excavated material n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point,complete all as specified & directed. 65 M&L sand filling under floors or in foundations including watering and consolidation,complete all as specified & directed.Note :- Punned thickness shall be measured and paid. 66 Supplying & laying reinforced precast concrete cable cover, class EHV, type 1 with peak, size 450mm x 230mm x 50mm (Note: cable cover shall be laid perpendicular to the axis of cable). 67 M&L for earthing complete with galvanised steel earth plate 600 x 600 x 6.3mm burried directly in ground (Earth pit not less than 2.25 m deep) with top edge of the plate not less than 1.5 m below ground level connected to GI strip of size 32 x 6 mm by means of nuts, bolts & washers,earth wire protected by GI pipe 50 mm dia ‘light grade’ ISI marked including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate),40 mm thick precast RCC cover in 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe ‘light grade’ ISI marked, 20 mm bore all as shown in Electrical plate No. 03 of MES Schedule Part-1 (2009) complete. 68 M&L GI pipes/tubes 80 mm bore,light gradeincluding necessary GI Fitting i.e. GI bends with socket ,reducer socket laid in trenches fixed on pole fixed on walls UG Road/floor for cable protection complete,complete all as specified & directed. . 69 M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 25x4mm galvanised iron strip,complete all as specified & directed. 70 Chain Link FencingExcavation in post holes (or similar holes) in soft/ loose soil each n exc 0.5 Cum filling in and ramming earth or broken rubble mixed with earth around, complete all speecified and as directed. 71 PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foudation for fencing post filling, and mass concrete, complete all as specified and directed. 72 Supply and Fixing Mild steel work Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. 73 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire. 74 Supply chain link MS fencing galvanised mild steel wires 4mm diameter mesh size not less than 75mm x 75mm etc complete all as as specified and directed.
Contract Date: May 20, 2026 Contract Value : ₹ 5.24 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttar Pradesh View Result →
46.
Power #11110319 Technical Bid
Tender for Rate Contract For Procurement Of Material That May Be Required During The Emergencies For The Year 2026-27 In Respect Of Ed-3Rd , Supply Of , 50 Mm² Ab (Ht) Cable (3X50 + 1X70 Mm²) Xlpe(11 Kv, 3C + Earth) , 70 Mm² Ab (Ht) Cable (3 X 70 + 95 Mm²) Xlpe(11 Kv, 3C + Earth) , 120 Mm² Ab (Ht) Cable (3X120 + 1X95 Mm²) Xlpe(11 Kv, 3C + Earth) , 150 Mm² Ab (Ht) Cable (3X150 + 1X95 Mm²) Xlpe(11 Kv, 3C + Earth) , 185 Mm² Ab (Ht) Cable (3X185 + 1X95 Mm²) Xlpe(11 Kv, 3C + Earth) , 11 Kv Heat Shrinkable Outdoor Cable Termination Kit Upto 50- 95 Sqmm ( 3 Core) , Heat Shrinkable Outdoor Cable Termination Kit Above 120 To 185 Sqmm ( 3 Core) , Mid Span Straight Through Jointing Kit For 11 Kv Abc 120 -185 Sqmm , 35 Mm² Ab (Lt) Cable ( 3 X 35 + 1 X 16 + 1 X 25 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 50 Mm² Ab (Lt) Cable ( 3 X 50 + 1 X 16 + 1 X 35 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 70 Mm² Ab (Lt) Cable ( 3 X 70 + 1 X 16 + 1 X 50 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 95 Mm² Ab (Lt) Cable ( 3 X 95 + 1 X 16 + 1 X 70 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 120 Mm² Ab (Lt) Cable ( 3 X 120 + 1 X 16 + 1 X 70 Mm²) Xlpe (1.1Kv, 3+1 C, Al) , Mid Span Straight Through Jointing Kit For 1.1 Kv Abc 95-150 Sqmm , Mid Span Straight Through Jointing Kit For 1.1 Kv Abc 35-70 Sqmm , 70 Mm² Single-Core Cable, 1.1Kv Grade, Xlpe Un-Armoured Frls Type , 95Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 120 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 150 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 185 Mm² Cable, 1.1Kv Grade, Xlpe Un Armoured Frls Type , 240 Mm² Single Phase Cable,1.1K V Grade, Xlpe Un Armoured Frls Type , 300 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 400 Mm² Single Phase Cable,1.1K V Grade, Xlpe Un Armoured Frls Type , 500 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 630Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 10 Mm² Cable (2C), 1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 16 Mm² Cable (2C), 1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 10 Mm² Cable (4C), 1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 16 Mm² Cable (4C),1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 25 Mm² Xlpe Lt Cable 4 Core, Armoured, Frls , 35 Mm² Xlpe Lt Cable 4 Core, Armoured, Frls , Single Core 1 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 1.5 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 2.5 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 4 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 6 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , 11 Kv, 3- Core Xlpe 35 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 50 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 70 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 120 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 150 Mm² Round Wire Armoured, Frls Cable , 11Kv, Three Core 185 Mm2 Aluminium Round Wire Armoured Xlpe Cable , Frls , 11 Kv, 3- Core Xlpe 240 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 400 Mm² Round Wire Armoured, Frls Cable , 11 Kv End Termination For 3C 120- 185 Mm² , 11 Kv End Termination For 3C 240 To 400 Mm² , 11 Kv Straight Through Jointing Kit Upto 50-95 Mm² , 11 Kv Straight Through Jointing Kit Upto 120-185 Mm² , 11 Kv Straight Through Jointing Kit Upto 240-300 Mm² , 11 Kv Straight Through Jointing Kit Upto 400 Mm² , Lt Distribution Box For 25 Kva Dtr With 40 annual periodical maintenance Mccb 3P 16 Ka For Incomer & 25 annual periodical maintenance Mccb 3P 16 Ka/10 Ka 1 No. Each (=2No.) For Outgoing Circuits . , Lt Distribution Box For 63 Kva Dtr With 100 annual periodical maintenance Mccb 3P 16 Ka For Incomer & 100 annual periodical maintenance Mccb 3P 16 Ka 1 No. And 63 annual periodical maintenance Mccb 3P 16 Ka 1 No.S For Outgoing Circuits , Lt Distribution Box For 100 Kva Dtr With 160 Mccb 3P 16 Ka For Incomer & 100 annual periodical maintenance Mccb 3P 16 Ka 2 No.S For Outgoing Circuits , Lt Distribution Box For 200 Kva Dtr With 315 annual periodical maintenance Mccb 3P 25 Ka For Incomer & 160 annual periodical maintenance Mccb 3P 16 Ka 3 No.S For Outgoing Circuits , Lt Distribution Box For 250 Kva Dtr With 400 annual periodical maintenance Mccb 3P 36 Ka For Incomer & 200 annual periodical maintenance Mccb 3P 16 Ka 1 No. And 160 annual periodical maintenance Mccb 3P 16 Ka 2 No.S For Outgoing Circuits , Lt Distribution Box For 400 Kva Dtr With 630 annual periodical maintenance Mccb 3P 36 Ka For Incomer & 200 annual periodical maintenance Mccb 3P 16 Ka 4 No.S For Outgoing Circuits , Lt Distribution Box For 400 Kva Dtr With 630 annual periodical maintenance Mccb 3P 36 Ka For Incomer & 200 annual periodical maintenance Mccb 3P 16 Ka 4 No.S For Outgoing Circuits , Temporary Lt Fuse Set For Distribution Transformers (Customised) As Per Kpdcl Drawing No. Ce/P&P/Drg/2023/Ltfs/001 (Enclosed) , 11Kv Polymeric Composite Disc Insulator 12Kv,Min Failing Load 45Kn, Lighting Impulse 75Kv Positive And 80Kv Negative, Creepage Distance 320Mm Nos , 11Kv Polymeric Composite Pin Insulator 12Kv, 5Kn, Lighting Impulse 75Kv Positive And 80Kv Negative, Creepage Distance 320Mm , 16 Kn Polymer Shackle Insulator , G.I Mukey For Shackle Insulators With Bolt Of (50X8)Mm , Gi U-Clamps For Shackle Insulator 50X8 Mm, (3.14 Kg/Mtr), 258 Mm , Gi U-Clamps For Shackle Insulator 50X8 Mm, (3.14 Kg/Mtr), 369 Mm , 11 Kv Link Set Heavy Duty With Copper Blade Size Of 14 Inch, 50 X 6 Mm, Female Contact Of Copper 6 Mm Thickness, With Post Insulator Of 10 Kn , 11 Kv Go, Ab Switch 3-Phase, 3-Pole,200 Amp, Vertical Type Set , 11 Kv Horn Gap Fuse Set 3 Phase 200A Set , Pg Clamps For 30 Mm² Acsr Conductor , Pg Clamps For 50 Mm² Acsr Conductor , Pg Clamps For 100 Mm² Acsr Conductor , Suspension/Tension Clamp With Eye Hook , Gi Pole Support Clamp Including Gi Nut And Bolts For 11 Mtr Pole With Size - 50X8x376 Mm , Gi Pole Support Clamp Including Gi Nut And Bolts For 9 Mtr Pole With Size - 50X8x376 Mm , Gi Pole Support Clamp Including Gi Nut And Bolts For 8 Mtr With Size 50X 8X 328 Mm , Gi Pole Support Clamp Including Gi Nut And Bolts For 8 Mtr Or 9 Mtr Plain Cement Concrete With Size 50X8x441mm , Cable Tie (Each Packet Contains 100 Nos.) , Cable End Caps , Insulating Piercing Connectors Of Sizes , 11 Kv Ipc (Insulation Piercing Conductors)For Bare To Cc(Covered Conductor) Connection , 11 Kv Ipc For Covered Conductor To Covered Conductor Connection , 33 Kv Tension Clamps With Bail And Ipc (Insulation Piercing Conductors) , 33 Kv Ipc (Insulation Piercing Conductors)For Bare To Cc(Covered Conductor) Connection , 33 Kv Ipc For cement concrete To cement concrete Connection , 33 Kv Ipc With Aluminium Bail For Earthing , Main Single Phase Service Distribution Box (Pole Db) Along With Mccb /Mcb As Per Rec Drawing. The Db Should Have Bottom Entery Of Cable With Proper Glands/Grommets-Safety Screws And Back Clamp Suitable For 11/9/8 Mtr St Pole Or 9/8 Mtr Plain Cement Concrete Poles With Nuts/Bolts , Main 3 Phase Distribution Box Ip 54 (Pole Db) Made From 20 Swg Crca Ms Sheet By Deep Drawn Method With Powder Coating. Internal Size Of The Box Shall Be 225Mm X 285Mm X 120Mm Used For Connection Through Abc Line And For Giving Connections To The Consumers 3Phase-1 Incoming 4 Outgoing I/C- 1, O/G-2-4 (200 A, 0.415 Kv) For Ryb Phase. The Db Should Have Bottom Entery Of Cable With Proper Glands/Grommets-Safety Screws And Back Clamp Suitable For 11/9/8 Mtr St Pole Or 9/8 Mtr Plain Cement Concrete Poles With Nuts/Bolts , Lt Line Spacers 3 P ,4 Wire , Lt Line Spacers 2 P ,3 Wire , Gapless Surge Arrestor,9 Kv ,10 Ka ,La With Polymer Housing, Stn. Type , 3-Ø, 4-Wire Trivector Meter (Prodigy ) With Suitable Ring Type Ct 200 annual periodical maintenance (Net Meter Enabled) , Single Phase Smart Energy Meter 5-30 Amp/ 10-60 Amp, Dlms Complaint Of Accuracy Class 1.0 , Three Phase Smart Energy Meter 20-80 Amp/, Dlms Complaint Of Accuracy Class 1.0 , Polypropylene Weather Proof Outdoor Type Meter Box For Single Phase Meter Along With Zinc Plated Clamps , Polypropylene Weather Proof Outdoor Type Meter Box For Three Phase Meter Along With Zinc Plated Clamps , Polypropylene Weather Proof Outdoor Type Meter Box For 4 Single Phase Meter Along With Zinc Plated Clamps , Gi Barbed Wire For Anti Climbing , Danger Plates With Clamps , Anti-Climbing Device With Clamps , Cemical Earthing Complete , Earthing Mat (Gi Flat 50 Mm X8 Mm)/(75 X10)Mm/(75X8)Mm , Gi Pipe 40 Mm 3 Mtr Long For Earthing , Earthing Electrode ( 3M Long) 20 Mm Dia. , Gi Strip 25X3 Mm , Galvanized Earthing Strips 50Mm X3mm. , Red Oxide , Aluminium Paint , Galvanized Nuts And Bolts , Galvanised Stay Set With 50X8mm Stay Clamp, Guy Insulator(2No..), Anchor Plate (200X 200 X 6 Mm), Nut-Bolts, 2 No. Turn-Buckles, 1.8M Long, 16 Mm Diameter Solid Gs Stay Rod & 7/3.15 Mm Dia Gi Stranded Wire Complete (11 Kv) , Galvanised Stay Set With 50X8mm Stay Clamp, Guy Insulator(2Nos.), Anchor Plate (300X 300 X 8 Mm), Nut-Bolts, 2 Nos Turn-Buckles, 1.8M Long, 16 Mm Diameter Solid Gs Stay Rod & 7/3.15 Mm Dia Gi Stranded Wire Complete (33 Kv) , Gi V Cross-Arm With Top Bracket Of Sizes , Gi Channel X-Arm And Braces Of Sizes , Gi Extension Riser Of Sizes , Gi Wire 6 Swg & 8 Swg , Guard Netting (For 52 Mtr Span) , Aluminium Jointing Sleeves 100 Sqmm , Aluminium Jointing Sleeves 50 Sqmm , Aluminium Jointing Sleeves 30 Sqmm , Suspension Fitting (2 Bolt) For 11 Kv Line , Tension Fitting (4 Bolt) For 11 Kv Line , Suspension/Tension Clamp With Eye Hook , Earth Wire 7/4 Sqmm , 1 Phase 2 Wire, 415V, 1Nos Of 100 Amps Incoming Sp Mccbs Fitted With Outgoing 04 No 32 Amps Sp Mcbs For Service Connections, Distribution Service Pillar Suitable For Outdoor Installation, Made Out Of Crca Sheet Painted Through 7-Tank Process With Pu Painted Busbars 2P, Aluminium With Heat Shrinkable Sleeves And Adequate Capacities Complete With All Accesories 4 Way Distribution Service Pillar. , 3 Phase, 415V, 1No Of 250 Amps Incoming 3 Tp Mccbs (Breaking 36Ka) Fitted Withoutgoing 03 No 100 Amps Sp Mccbs, 1No.100Amps 3 Pole Mccb For Outgoing Lt Cables, Distribution Feeder Pillar Suitable For Outdoor Installation , Made Out Of Crca Sheet Painted Through 7-Tank Process With Pu Painted Busbars 4P, Aluminium With Heat Shrinkable Sleeves And Adequate Capacities Complete With All Accesories 4 Way Distribution Feeder Pillar. , Fire Extingiusher Co₂ Type Of 4.5 Kg Capacity For Control Room , 3 Sand Bucket Fire Extingiusher , Gum Boots With Steel Toe Of Sizes , Winter Jacket- Coat Ecc Consists Of Three Independent Components That Is Wind Cheater ( Waterproof ), Insulating Layer And Waist Coat ( Sleeve Less ), Three Layer Waterproof Breathable Fabric, Dual Shade Og/ White, Material Of Insulating Layer- 1. Batting Polyester, 100 Gsm, 2. Fabric Nylon Knitted Aluminized, 3. Fabric Nylon 75 Gsm White, Material Of Waist Coat- Double Layer Bonded Polyester Fleece , Safety Vest - Reflective Luminous Garments - High Visibility Warning Garments With Synthetic Slide Fasteners, Fluorescent Yellow, Width Of Retro Reflective Material For All Types Of Garments (Minimum) 50 Millimeter , Non-Contact Voltage Detector, Upon Detection, Tip Glows And Beeper Sounds, Cat Iv 1000 V For Added Protection, Expanded Range: 90 V To 1000 V Ac Or 200 V To 1000 V Ac, Battery Cell Operated (2 Aaa Or Standard), Voltbeat Technology And Continuous Self-Test , Safety Helmet- Quality Of Shell High Quality, High Impact, Light Weight,Tough, Conformity To Specification- Is 2925:Latest ,En 397 Certified , Safety Rubber Gloves Up To 15 Kv As Per Iec Standard , Safety Belt/Harness With Shock Absorber , Safety Shoes Of Sizes -Personal Protective Equipment - Safety Footwear As Per Bis Specification No Is 15298 ( Part 2 ): 2016, Toe Cap- ( Steel ) Metallic, Insole, Classification- Class I ( Footwear Made From Leather And Other Materials, Excluding All-Rubber Or All-Polymeric Footwear ) With Different Sizes, Slip Resistant- As Per Clause 5.3.5.4 Of Is 15298 ( Part 2 )- Slip Resistance On Ceramic Tile Floor With Nals And On Steel Floor With Glycerine. , 11 Kv Earthing/Discharging Rod (Set Of 3 Rods) Set With Minimum 20 Sqmm Cable And U-Clamp , Battery Operated 12 Kv Voltage Detector (Cpri Tested) Complete Kit Including Hv Detector Probe, 20 Feet Frp Insulation Stick, Carrying Bag. The Detector Should Have Audio As Well As Visual Anunciation, Sensing Distance Of 1 Meter For 11Kv. Bright High Intensity Red Leds For Visual Annunciation Even In Unfavourable Daylight Conditions And A Buzzer To Produce Loud Beep Audible Even In Noisy Backgrounds , Alumunium Ladder 2*20 (Double Ladder) 3 Mm Thick Anti Corossion, Anodised, Bottom Rubber, Sliding Type With Rope And Pulley Arrangement , Alumunium Ladder 2*15 (Double Ladder) 3 Mm Thick Anti Corossion, Anodised, Bottom Rubber, Sliding Type With Rope And Pulley Arrangement , Aluminium Ladder 2*10 Ft Long, Anti Corossion, Anodised, Bottom Rubber, Sliding Type With Rope , Bamboo Ladder 18 Ft Long, Natural Bamboo Finish, Min Load Bearing Capacity Of 150 Kg , Bamboo Ladder 20 Ft Long, Natural Bamboo Finish, Min Load Bearing Capacity Of 150 Kg , Wart Free Budloo Wooden Ladder 17 Feet Long And Slightly Tappered Upwards The Steps Are To Be Fixed With Flat Galvinized Iron Strip With Galvinized Nails. The Foot Of The Ladder To Be Provided With Rubber Anti Skid Hold. , Wart Free Budloo Wooden Ladder 20 Feet Long And Slightly Tappered Upwards The Steps Are To Be Fixed With Flat Galvinized Iron Strip With Galvinized Nails. The Foot Of The Ladder To Be Provided With Rubber Anti Skid Hold. , Telescopic Ladder 20 Ft Long, 6063 T5 Grade Of Aluminium , 150 Kg Load Capacity, Self Locking Mechanism, Anti-Skid Foot Caps , Hand Held Search Light Led Lamp, 100 Watt With Lithium Ion 3.7 V, 3.5 Ah, 500 Lux/100 Mtr With Lamp Life -50000 Hours, Ip 65, 12 Months Warranty , Hdpe Pipe Outer Dia 180 Mm Inner Dia 152 Mm For Laying Of 11Kv Xlpe Cable From Power Transformer To Control Room , Mccb - 200 Amps,36Ka,4P Adjustable , Mccb - 40 Amps,36Ka,4P Adjustable , Mccb - 63 Amps,36Ka,4P Adjustable , Mccb - 100 Amps,36Ka,4P Adjustable , Mccb - 160 Amps,36Ka,4P Adjustable , Mccb - 250 Amps,36Ka,4P Adjustable , Mccb - 400 Amps,36Ka,4P Adjustable , Mccb - 630 Amps,36Ka,4P Adjustable , Mccb - 200 Amps,36Ka,3P Adjustable , Mccb - 100 Amps,36Ka,3P Adjustable , Mccb - 160 Amps,36Ka,3P Adjustable , Mccb - 250 Amps,36Ka,3P Adjustable , Mccb - 400 Amps,36Ka,3P Adjustable , Mccb - 630 Amps,36Ka,3P Adjustable , Bobin Insulators Clamps/Cliffs. , Epoxy Resin Cast Panel Insulators Upto 500Mm , 18 Feet Fiber Link Rod , 18 Feet Bamboo Link Rod , Al. Solderless Clamps Suitable For Transformer 1000 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 630 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 400/500 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 250 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 100 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 63 Kva As Per Relevant Is , Aluminium Thimbles 630 Mm2 As Per Relevant Is , Aluminium Thimbles 500 Mm2 As Per Relevant Is , Aluminium Thimbles 400 Mm2 As Per Relevant Is , Aluminium Thimbles 300 Mm2 As Per Relevant Is , Aluminium Thimbles 240 Mm2 As Per Relevant Is , Aluminium Thimbles 185 Mm2 As Per Relevant Is , Aluminium Thimbles 120 Mm2 As Per Relevant Is , Aluminium Thimbles 95 Mm2 As Per Relevant Is , Aluminium Thimbles 70 Mm2 As Per Relevant Is , Aluminium Thimbles 50 Mm2 As Per Relevant Is , Aluminium Thimbles 35 Mm2 As Per Relevant Is , Aluminium Thimbles 25 Mm2 As Per Relevant Is , Aluminium Thimbles 16 Mm2 As Per Relevant Is , Aluminium Thimbles 10 Mm2 As Per Relevant Is , Dpc Copper Winding Wire (Round) In Sizes 11 To 22 Swg Fresh. , Dcp Copper Strip Of Sizes For Lv Winding Of Distribution Transformers 250 Kva To 630 Kva Fresh. , Se Copper Winding Wire (Round) In Sizes 11 To 22 Swg. , Dpc Aluminium Winding Wire (Round) In Sizes From 12 To 20 Swg-Fresh , Dpc Aluminium Strip Of Sizes For Lv Winding Of Distribution Transformers 25 Kva To 630 Kva - Fresh , Se Aluminium Winding Wire (Round) In Sizes 12 To 20 Swg-Fresh , Dpc Copper Winding Wire (Round) In Sizes 12 To 20 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Dpc Copper Strip Of Sizes For Lv Winding Of Distribution Transformers 25 Kva To 630 Kva( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Se Copper Winding Wire (Round) In Sizes 11 To 22 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Dpc Aluminium Winding Wire (Round) In Sizes From 12 To 20 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Dpc Aluminium Strip Of Sizes For Lv Winding Of Distribution Transformers 25 Kva To 630 Kva ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Se Aluminium Winding Wire (Round) In Sizes 12 To 20 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Lv Brass Bush Rods 12 Mm , Lv Brass Bush Rods 19 Mm , Lv Brass Bush Rods 25 Mm , Lv Brass Bush Rods 32 Mm , Press Card Board Soft Calendared Solid 1Mm/2Mm/3Mm(As Per Sample) , Press Card Board Pre Compressed Solid 1Mm/2Mm/3Mm. , Ht Insulating Gum , Glass Wool Sleeves Of Sizes , Aluminium Brazing Rod (Standard Length) , Copper Brazing Rod (Standard Length) , Flexible Copper Strip (Shim) 75Mm X 0.5 Mm , Pvc Sheets 1 Mm Thick , Empire Tape 1 , Electrical Grade Kraft Paper, 4 Mil , Leatheroid Insulation Paper 20 Mil. , Hv Bushing , Lv Bushes Suitable For 63 To 100 Kva Dt , Lv Bushes Suitable For 200 To 250 Kva Dt , Lv Bushes Suitable For 400 To 630 Kva Dt , Epoxy Resin Cast 1.1 Kv Low Voltage Transformer Bushing With Busbar For 400/630 Kva Dt , Cotton Tape 1 (Size) 35 M Long. , Rubber Washers , Ht Paper , Cork Washer 12Mm Dia , Cork Washer20mm Dia , Cork Washer 25Mm/30Mm Dia , Plastic Metre Seals , Trifor (Tower Roller) , Transformer Oil Filitration Plant Filter Elements Of 1 Micron(60X250) Mm For Transformer Oil Filitration Plant , Heating Elements Of 2000 Watts For Transformer Oil Filtration Plant , Press Cardboard Cutter Having Bed=52X21 With Height Of Machine 45 With No. Of Tensile Springs 2 Nos. Complete In All Respects. , Angle Grinder, 800W Power, No-Load Speed Of 11000 Rpm, 100 Mm Disc , Welding Machine(Inverter Type) =5=10 Kva Rated Input Power, Maximum Welding Current At 60% Duty Cycle (In A) 150=250, Adjustable Hot Start,Anti-Stick Functions,Arc Force Control , Cordless Impact Drill/Drivers With 2 Batteries, Ideal For Driving Screws Into Wood And Drilling Into Masonry, Metal, And Wood , Pneumatic Air Impact Wrench With Sockets From 15 To 30 , Air Compressor 50 Ltr , Hand Held Brush Cutter , Hydraulic Crimping Tool , Pallet Truck 3 Ton , Hand Driven Insulation Resistance (Meggar) , Multimeter(Analog) , Multimeter(Digital) Voltage: Dc: 1000 Volts; Ac: 1000 Volts; Dc Accuracy: ± 0.5% + 3 Digit; Ac Accuracy: ± 1% + 3 Digit; Current: Dc: 10 Amps; Ac: 10 Amps; Dc Accuracy: ± 1.5% + 3 Digit; Ac Accuracy: ± 1.5% + 3 Digit; Resistance: 40 M Ohm; Resistance Accuracy: ± 1.5% + 3 Digit ; Capacitance: 1000 Μf; Capacitance Accuracy: ± 5% + 5 Digit Cat Iii 600 Volts Safety Rating , Pliers -Type Of Hand Tool-Combination Plier As Per Is 6149, Type Of Insulation-Rubber Insulation, Material-Carbon Steel , Nawara Tape 1 (Size) 35 M Long. , Rubberized Cork Sheet 4 Mm Thick 2Ftx3ft , Rubberized Cork Sheet 3Mm Thick 2Ftx3ft , Bakelite Tubes 12Mm Dia ( 1 Mtr Long) , Hv Bush Clamps (Ms) , Aluminium Clamping Member (Shoes) For Hv Bushing , Lv Cork Washers 12 Mm Dia , Lv Cork Washers 20Mm Dia , Lv Cork Washers 25 Mm/30 Mm Dia , Nuts & Bolts (M.S) Of Sizes. , M.S Flat Washers. , Hv Cork Washers 110 Mm O.D , Aluminium Welding Flux , Aluminium Flat 4/6/8/10 Mm Thick Of Required (Busbar) , Copper Flat 4/6/8/10 Mm Thick Of Required Width. (Busbar) , Ms Plug & Caps 1/2 ; 3/4; /1; 1.1/4; 1.1/2 , Oil Seal Rings (O-Rings) For Lv/Hv Bush Rods 12 Mm Dia. , Oil Seal Rings (O.Rings) For Lv/Hv Bush Rods 20 Mm Dia , Oil Seal Rings (O.Rings) For Lv/Hv Bush Rods 25 Mm Dia , Creep Tape 1 , Cotton Cloth , Empire Sleeves Of Sizes , Synthetic Enamel Paint Smoke Grey Colour , Paint Thinner , Steel Primer , Silica Gel , Transformer Oil As Per Is 335 And Amendments Thereof , Welding Rods 3.15 Mm/4Mm. (100 No. Per Packet) , Refilling Of Oxygen Gas For Brazing , Refilling Of Lpg Gas For Brazing , 12 Piece Tool Kit (1-Piece Screwdriver, 1-Piece Hammer, 7-Pieces Screwdriver Bits, 1-Piece Plier, 1-Piece Wrench(Adjustib And 1-Piece Measuring Tape) Bosch/Dewalt/Taparia , Clamp Meter, Conforms To Iec 61010, Cat Ii 600V Safety Rated, 600A Ac Current Measurement, Ac/Dc Voltage, Resistance, Continuity & Data Hold Function, 2 Years Manufacturer Warranty [Fluke/Digi Sense/ Motwane/Extech] , 12 Volts, 42 Ah Lead Acid Battery , 12V 7 Ah Rechargeable Sealed Maintenance Free Battery (Smf) For Ups , Battery Connector For 12 V Battery Bank (12 No. Both Ends Of Each Connector Should Be Properly Clamped With Nuts, Bolts, Washers) , Fabricated Gi Pollar Collar 50X6 Mm With Nuts And Bolts , Digital Weighing Scale Upto 1 Ton , Portable Professional Petrol Chainsaw,18 Inch Or Above, 2 Kw Or Above, Pitch Of 3/8 Or Above, Petrol Capacity 400 Ml Or Above. , Double Ply Polyester Webbing Slings, Load Capacity 6 Tonne , Dee Shackles Forged Shackles, Working Load 6.5 Tonne , Eyebolt With Recessed Collar With Maximum Axial Lifting Capacity Of 6 Tonne , Handheld Brush Cutter / Line Trimmer, With Nylon Feed Head Attachment Petrol Engine Low Vibration Centrifugal Clutch, Hardened Steel 2 Teeth Blade, Bump / Tap & Go Type, Shaft Length (Mm) 1425 To 1449, Circular Saw Attachment Inclusive In The Scope Of Supply , Portable Hydraulic Crimping Tool For 30 Sqmm To 400 Sqmm With All Attachments , Pre Fabricate Galvanized Single Way Top Bracket (1000 Mm Long With 48.3 Od Gi Pipe) To Be Fitted On Top Of Octogonal Pole For Holding Lighting Luminaries. , Dk Thermoplastic Cable Junction/ Termination T Boxes 8X10Of Class Ip55/Ip65 Fitted With Two 2-5 annual periodical maintenance Mcb Strip,4-Way Terminal Block / Connectors Incl. Copper Lugs, Clamps ,Nut & Bolts Washers Etc (Hansel Or Equivalent Make) Or Poles With Two Way Type Bracket To Be Fitted Properly Inside The Door Opened Gear Box Provided On Thebottom Side Of The Pole. , Surge Protector For The 120/190 Watt Led Type Lighting Fixture Complete. , Outdoor Type Lt Control Panel Size 900Mmx900mmx450mm Having Input Main Control Of 100 annual periodical maintenance Mccb With Tpn Bus Bar With 40 annual periodical maintenance Tpn Mcb 4Nos For Outgoing Circuits,Including Astronomical Switching With Contactor Of Required Capacity. The Panel Should Be Fitted With A Digital Composite Voltmeter/Ampermeter/Indicator Set With Selecter Switch And Backup Protection System, Thimbling And The Panel Shall Further Be Provided With Proper Openings On Front Side As Well As On Rear Side Including Its Locking Arrangement And Also With Required Glands And 4No. Angle Iron Legs For Grouting The Panel On Bed , The Panel Shall Also Be Provided With Powder Coat/Pu Paint. The Item Includes Its Thimble As Required At Taping Point For Incomming , Out Going And Internal Panel Wiring Complete Unit. , Dust/Rain/Snow-Proof Canopy Type Mini-Outdoor Lt Feeder Panel Of Size 450X300mm With Front Door Opening Duly Powdered Colour Coated With Inbuilt 2No Tpn 16-32 annual periodical maintenance Mccb,Tpn Busbars Of Same Capacity Installed On Cement Concrete Block With 4 Angle Iron Legs Grouted In The Cement Concrete Of Termination Of Main 25Sqmm Cable And Outgoing 25/16 Sqmm Cable Circuits. , 120 Watt Led Luminaries Of Ip 67 Protection. , 190 Watt Led Luminaries Of Ip 67 Protection. , 110 W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 70W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 50 W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 30W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 6 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 1Pole With 1Pp, 240 V , 10 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range B, 1Pole With 1Pp, 240 V , 10 A Dp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 2 Pole With 2 Pp, 240 V , 16 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 1Pole With 1Pp, 240 V , 16 A Spn Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 2Pole With 1Pp, 415 V , 16 A Tp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 3Pole With 3Pp, 415 V , 32 A Tpn Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 4 Pole With 3 Pp, 415 V , 32 A Tp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 3 Pole With 3 Pp, 415 V , 32 A Dp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 2 Pole With 2 Pp, 415 V , 32 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range B, 1 Pole With 1 Pp, 415 V , 63 A Tpn Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 4 Pole With 3 Pp, 415 V , Astronomical Timer For Street Light Control, 3 Phase, 18 Kw/43 A Each Phase, Ip 66, Manually Settable Timer With 12 Programmes Spreaded Over A Year As Defined Programme, 260 Volt +/- 5 Volt Over Voltage Protection Per Phase, 160 Volt +/- 5 Volt Under Voltage Protection Per Phase, Operating Temperature Range -10 To +50 Deg C, /=60 Seconds On/Off Timing Accuracy , Embossing Punch Die Tool For Dt Coding (A-Z And 0-9) , Battery Operated Engraving Machine , Hand Operated Oil Pump/Barrel Pump , Manilla Rope - 25 Mm , Nylon Rope- 20 Mm , 11Kv Pilfer Resistant Metering Cubicle For 3Phase 4 Wire Metering System Made Of Ms Sheet Steel Thickness Not Less Than 2Mm Duly Power Coat Painted Suitable For Indoor As Well As Outdoor As Per The Site Requirement. The Cubicle Shall Be Painted Through 7-Tank Process. The External Dimensions Should Be Adequate. Panel Having Two Compartments Upper Meter Compartment And Lower Ct/Pt Compartment. Provided With Synthetic Or Semi Synthetic Gasket Firmly Glued To The Sufrace, Dust, Weather And Vermin Proof And Shall Comply Degree Of Protection Ip 65 Both The Chambers Having One Sided Hinged Door Arrangments. The Metering Panel Shall Be Provided With Two No Ms Channels Of Size 100 X 50 Mm On The Front And Rear Sides Duly Welded And 4 No Of Lifting Hooks. It Should Be Possible To Take Meter Reading Manually, Through Cmri And Computer Without Opening The Lv Chamber Door. , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 2.5 /5 For 25Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 5/5 For 63Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 7.5/5 For 100Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 15/5 For 200Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 20/5 For 250Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 25/5 For 400 Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 50/5 For 630 Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 75/5 For 1 Mva Dt , 11Kv/ 110 V, Three Phase Epoxy Resin Cast Pt With Rated Burden 15Va Per Phase And Accuracy Class 0.5 Or Better And Conforming To Is:3156 (Part-I&Ii) Amended Upto Date With Proper Colour Coded Identification. Pts Shall Be Of Uniform Insulating And Withstand Separate Source 23Kv providing fixing For One Minute. , 3Ph, 3 Wire Ht Ct/Pt Operated Fully Static Smart Tri-Vector Energymeters Dlms Compliantcategory C With Rs232 Port For Modem Compatibility. 11Kv/110V, Ph-Ph (3P,3W) Metersfor Measurement Of Different Electrical Parameters Including Active Energy (Kwh/ Mwh), Reactive Energy (Kvarh/Mvarh), Apparent Energy (Kvah/ Mvah) Etc. (Make L&T, Secure,Abb) , Led String Light 15 Mtr Long Of Different Colours (Saffron/White/Green) With Controller. , 4 Socket Extension Boards With Each Compatible Sockets Of 16 annual periodical maintenance And 5 Mtr Long Cable And Plug Along Surge Protector And On/Off Controller.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Jammu And Kashmir View Result →
47.
Railways #11107884 AOC
Supply Of pair of welders hand gloves (one pair consists of lh & rh) type-1 confirming to is-2573/1986 (reaffirmed 2003) except size. the total length (l) of the hand glose shall be 450+/-5 (18 , pair of welders hand gloves (one pair consists of lh & rh) type-1 confirming to is-2573/1986 (reaffirmed 2003) except size. the total length (l) of the hand glose shall be 450+/-5 (18), as against the sizes mentioned under para 3.2 of is : 2573/1986, also the hand width size shall be 5.5 (min) and cuff width size 7 (min) as against para 4.3.1.1 of is; 2573/1986. the item shall confirm to test parameters as per is:5914/1970. the item shall also confirm to the following . 1) the gloves shall be made of split leather. 2) the golves shall be dyed i n dark rust /blue/black colour. [ warranty period: 30 months after the date of delivery ] ]
Contract Date: May 19, 2026 Contract Value : ₹ 1.07 Lakh
Government Departments No of Bidders 1
Telangana View Result →
48.
Educational and Research Institute #11106502 Technical Bid
axiom dual lat pulldown/low row with luxury trim and double stitched upholstery ph-oplr the axiom series lat pulldown/low row accommodates two exercises that target the entire back and rear shoulder muscle groups. the clean, inviting look is appealing to all exercisers. frame • fully welded 11-gauge steel frames • electrostatic powder coat finish for maximum durability tower • consistent low profile 53” (135 cm) tower • full front (or optional rear only) weight stack shrouds adjustments • visible, color contrasting, yellow adjustment handles. • latex free rubber over molded adjustment handles. weight plates • solid steel 15 lb (7.5 kg) weight plates • push / pull increment weight: 7.5 lbs (3.75 kg) • top weight plate is fitted with self-lubricated bushings • magnetic weight selector pin locks into place biomechanics • work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. • variable cams & machine design replicate the body’s natural strength profile instructional placards • qr coded / nfc chipped placards pictorially illustrate the muscles trained, proper machine set up & use, for easy to follow instructions regardless of language. size (l x w x h): 91” x 50” x 85” metric (cm): 231 x 127 x 216 recommended live area (l x w x h): 115” x 86” x 97” metric (cm): 292 x 218 x 246 weight: 452 lbs (205 kg) *weight stack (includes increment weight): 202.5 lbs (101.25 kg) max user weight: 300 lbs (136 kg) key features: • accommodates two exercises that target the entire back and rear shoulder muscle groups • comes standard with lat pulldown bar and neutral grip row handle • foot pegs provide additional user stability during row • angled thigh pads stabilize users without the need of an additional adjustment frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , hammer strength select standing calf hs-sc the hammer strength select standing calf is a fundamental part of the strength training progression. nine pad height positions accommodate all users, and contoured non-slip foot plates allow users’ ankles to move in a full range-of-motion. the 22 pieces in the hammer strength select line provide an inviting introduction to hammer strength equipment. • dimensions (l x w x h): 58 in x 45 in x 71.5 in (148 cm x 115 cm x 182 cm) • weight: 680 lb (309 kg) • weight stack weight in kgs: 195 frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , hammer strength plate loaded v-squat pl-vsq the plate-loaded v-squat is designed to have a natural squatting motion, while reducing back and knee strain through a curved arc of motion. it also employs a standard counter balance for lower starting resistance. •starting resistance: 54 lbs (24.5 kg) •dimensions (l x w x h): 91 in x 42 in x 81 in (232 cm x 107 cm x 206 cm) •weight: 530 lb (241 kg) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , signature plate loaded incline press splip the signature series incline press uses horizontal grips to simulate a more traditional bench press, converging movements for a natural forward pressing motion, and iso-lateral movements for equal strength development. signature series plate-loaded enhances any facility and utilizes independent converging and diverging movements for an instinctively natural experience. •dimensions (l x w x h): 50 in x 62 in x 75 in (127 cm x 158 cm x 191 cm) •weight: 297 lb (135 kg) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , axiom dual leg extension/leg curl with luxury trim and double stitched upholstery ph-oplce a selectorized station that effectively works complimentary leg muscle groups. designed to be intuitive and inviting for exercisers of all abilities. single-pin adjustment allows exercisers to simultaneously adjust seat and back pad roller pads adjust in 4 positions to accommodate varying tibia lengths hand grips provide user with additional stability during movement footprint (l x w x h)56 x 40 x 53 (metric cm: 142 x 102 x 135) recommended live area (l x w x h)98 x 64 x 77 (249 x 163 x 196) weight450 lbs (204 kg) weight stack(includes increment weight)202.5 lbs (101.25 kg) max user weight300 lbs (136 kg) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , hammer strength plate loaded iso-lateral low row il-lr the plate-loaded iso-lateral low row was blueprinted from human movement. separate weight horns engage independent diverging and converging motions for equal strength development and muscle stimulation variety. it provides a unique path of motion that contrasts with the decline press. dimensions (l x w x h)50 in x 48 in x 66 in (127 cm x 122 cm x 168 cm) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , signature plate loaded row splrow •dimensions (l x w x h): 55 in x 57 in x 54 in (140 cm x 145 cm x 138 cm) •weight:294 lb (134 kg) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , axiom dual abdominal/back extension with luxury trim and double stitched upholstery ph-opabba the axiom series abdominal/back extension is a 8 work arm adjustments allow users a variety of start positions frame • fully welded 11-gauge steel frames • electrostatic powder coat finish for maximum durability tower • consistent low profile 53” (135 cm) tower • full front (or optional rear only) weight stack shrouds adjustments • visible, color contrasting, yellow adjustment handles. • latex free rubber over molded adjustment handles. weight plates • solid steel 15 lb (7.5 kg) weight plates • push / pull increment weight: 7.5 lbs (3.75 kg) • top weight plate is fitted with self-lubricated bushings • magnetic weight selector pin locks into place biomechanics • work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. • variable cams & machine design replicate the body’s natural strength profile instructional placards • qr coded / nfc chipped placards pictorially illustrate the muscles trained, proper machine set up & use, for easy to follow instructions regardless of language. size (l x w x h): 58” x 45” x 53” metric (cm): 147 x 114 x 135 recommended live area (l x w x h): 94” x 69” x 77” metric (cm): 239 x 175 x 196 weight: 519 lbs (235 kg) *weight stack (includes increment weight): 202.5 lbs (101.25 kg) max user weight: 300 lbs (136 kg) key features: • unique, workarm design allows for easy entry / exit • 8 workarm adjustments allow users a variety of start positions • two foot support positions better accommodate taller and shorter users • lumbar pad properly positions and supports users during exercise frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , life fitness multi adjustable bench ph-lbr-ma (smab) experience precision adjustments, effortless transport, and unrivaled comfort and style with the life fitness multi-adjustable bench. max user weight: 300 lbs (136 kg) max training weight: 500 lbs (227 kg) back adjustments: -10°, 0°, 15°, 30°, 45°, 60°, 70° seat adjustments: 0°, 15°, 30° weight: 110 lbs (50 kg) size: 58” x 29” x 17” (147 x 73 x 43 cm) frame colour: standard colour upholstery colour: standard colour , ramp up olympic junior 5ft bar ramp up olympic junior 5ft bar , ramp up olympic training barbell brs4004 (women) introducing the all new ramp up powerlifting training bar with single powerlifting knurl marks and centre knurling. with its 29mm shaft diameter and exceptional tensile strength, it offers minimal flex and whip, establishing itself as the ultimate workhorse for bench presses, squats, and deadlifts. get ready to revolutionise your training and elevate your performance to unparalleled heights. women bar, 2010mm length 25mm diameter 8 bearings. bar shaft and sleeve by hardened chrome , ramp up ez curl bar brs4007 (black) ramp up ez curl bar brs4007 (black) , ramp up cpu grips weight plate (brs1007) each plate is derived from heavy-duty iron with a solid, high-grade, low-bounce rubber cover surrounding the parameter. product type: regular cpu weight plate each weight features grip holes to provide a secure grip during use. the coating ensures a durable, reliable weight that will last through grueling workouts & the raised numbers help to easily identify weight sizes. weight plates can be used to perform muscle strengthening exercises and endurance training, and to increase flexibility and balance. a single weight plate can also be used for warm-up exercises.  ramp up cpu grips weight plate 5 kg (brs1007) - 4 nos , ramp up cpu grips weight plate (brs1007) each plate is derived from heavy-duty iron with a solid, high-grade, low-bounce rubber cover surrounding the parameter. product type: regular cpu weight plate each weight features grip holes to provide a secure grip during use. the coating ensures a durable, reliable weight that will last through grueling workouts & the raised numbers help to easily identify weight sizes. weight plates can be used to perform muscle strengthening exercises and endurance training, and to increase flexibility and balance. a single weight plate can also be used for warm-up exercises. , ramp up cpu grips weight plate (bmrs1007) each plate is derived from heavy-duty iron with a solid, high-grade, low-bounce rubber cover surrounding the parameter. product type: regular cpu weight plate each weight features grip holes to provide a secure grip during use. the coating ensures a durable, reliable weight that will last through grueling workouts & the raised numbers help to easily identify weight sizes. weight plates can be used to perform muscle strengthening exercises and endurance training, and to increase flexibility and balance. a single weight plate can also be used for warm-up exercises.  ramp up cpu grips weight plate 15 kg (brs1007) - 4 nos , ramp up cpu grips weight plate (brs1007) each plate is derived from heavy-duty iron with a solid, high-grade, low-bounce rubber cover surrounding the parameter. product type: regular cpu weight plate each weight features grip holes to provide a secure grip during use. the coating ensures a durable, reliable weight that will last through grueling workouts & the raised numbers help to easily identify weight sizes. weight plates can be used to perform muscle strengthening exercises and endurance training, and to increase flexibility and balance. a single weight plate can also be used for warm-up exercises.  ramp up cpu grips weight plate 20 kg (brs1007) - 4 nos , axiom dual multi press with luxury trim and double stitched upholstery ph-opmp the axiom series multi press is a triple-functioning design allows for chest press, incline press and shoulder press movements in a natural body position frame • fully welded 11-gauge steel frames • electrostatic powder coat finish for maximum durability tower • consistent low profile 53” (135 cm) tower • full front (or optional rear only) weight stack shrouds adjustments • visible, color contrasting, yellow adjustment handles. • latex free rubber over molded adjustment handles. weight plates • solid steel 15 lb (7.5 kg) weight plates • push / pull increment weight: 7.5 lbs (3.75 kg) • top weight plate is fitted with self-lubricated bushings • magnetic weight selector pin locks into place biomechanics • work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. • variable cams & machine design replicate the body’s natural strength profile instructional placards-------------• qr coded / nfc chipped placards pictorially illustrate the muscles trained, proper machine set up & use, for easy to follow instructions regardless of language. size (l x w x h): 68” x 54” x 62” metric (cm): 173 x 137 x 157 recommended live area (l x w x h): 92” x 78” x 86” metric (cm): 234 x 198 x 218 weight: 539 lbs (245 kg) *weight stack (includes increment weight): 202.5 lbs (101.25 kg) max user weight: 300 lbs (136 kg) key features: • triple-functioning design allows for chest press, incline press and shoulder press movements in a natural body position • a single-pin, gas-assisted mechanism allows for easy, light-weight seat and back pad position adjustments simultaneously for the different exercises. • work arm adjusts in 7 positions for multiple pressing angles to accommodate users size and preference. • multiple grip locations accommodate for different user sizes frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , life fitness cable motion dual adjustable pulley 2:1 - op-dap this multi-exercise machine offers nearly limitless strength training options. the axiom series dual adjustable pulley is a centerpiece for individual workouts, personal training sessions, and small group training. the inviting design with center positioned weight stacks has an open feel and narrow footprint to optimize valuable floor space. the axiom series dual adjustable pulley features an ergonomic pull-up bar that offers several grip positions, and 90 of cable that allows for a wide range of user-defined movements and strength training possibilities. the axiom series dual adjustable pulley includes: one pair of long adjustable handles, one ankle strap and a triceps rope. cable & pulleys • 7 x 19 strand construction, lubricated, nylon-coated cables. • 4.5-inch diameter fiberglass-impregnated nylon pulleys with sealed ball bearings. biomechanics • work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. • variable cams & machine design replicate the body’s natural strength profile size (d x w x h): 55” x 56” x 84” metric (cm): 140 x 142 x 213 recommended live area (d x w): 109” x 184” x 102” metric (cm): 277 x 467 x 259 weight: 718 lbs (326 kg) weight stack: standard: 2 – 165 lb (2 – 75 kg) stacks resistance ratio: 1:2 effective user resistance: key features: • 90” (228 cm) of cable travel to accommodate full body movements • ergonomic pull-up bar with neutral, chin up, and pull up grip positions • optimized weight stack position to minimize product width without sacrificing function • accessories included: one pair of long adjustable handles, one ankle strap and one triceps rope frame colour: standard colour upholstery colour: standard colour , life fitness sl powermill climber w apple watch connect - black onyx premium inpmsl the integrity sl console offers an intuitive cardio experience combined with a level of digital connection to fitness apps and wearables that exercisers have come to expect. connects to apple watch® wi-fi, ant+, and nfc compatibility 17 total workouts. elevation goal workouts let the exerciser take their mind off of the burn and allow them climb as high as they can. bluetooth® connection to heart rate straps, headphones and mobile devices an ac motor provides an extremely wide range of speeds. from 12 – 185 steps per minute, the motor’ offers options to all exercisers, whether they’re engaging in reconditioning or hiit workouts. accessory holder integrated smartphone accessory tray with removable cup holders transport wheels four wheels for easy mobility step space 205 sq. in. (0.132 sq. m) step width 20.75 (53 cm) step depth 9.875 (25 cm) step height 7.5 (19.05 cm) step-up height 10.5” (25.4 cm) handlebar design bullhorn resistance technology - drive system surestep system technology, 4.0hp motor/motor controller assembled dimensions 55.9 x 32.8 x 82.3 (143 x 84 x 210 cm) max user weight 400 lbs (181 kg) unit weight 473lbs (215kg) ceiling height required 9 (2.7 m) one floor climbed 16.25 steps safety dual braking system, & recovery modespm 12-185 resistance level 26 (0-25) entry / exit (auto-stop function) dual step-assist & auto-detect feature  slp-cnsl-enm-01 powermill sl console - 1 nos  inpmsl - (base - black onyx) - 1 nos , life fitness treadmill + sl console with apple watch connect - black onyx premium int-sl deck type dx3™ running surface width 22 (56 cm) running surface length 60 (152 cm) motor 4hp (8.0hp peak) ac motor------------------bluetooth®, ant+ and nfc work to provide connection to wearables, headphones, heart rate straps and more. this advanced console technology allows exercisers to workout the way the want. 22 total workouts. highlights include high-intensity and endurance intensity to help runners improve speed and endurance. exercisers can also challenge themselves with eight different fitness tests, including those used by the army, navy, marines and air force.  ph-intdsl-m-ecb (base - black onyx) - 1 nos  slt-cnsl-enm-01 - sl tread led console english metric - 1 nos  int-sl-blkhf-14 - 1 nos  intde-allhx-02 - (black base) - 1 nos  intde-basekit-5102 - 1 nos speed range 0.5 – 14mph (0.8 – 23 km/h) in 0.1 increments step-up height 8 (20 cm) incline 15% max user weight 400lbs (181 kg) length 82 (208 cm) width 36 (91 cm) height 56 (142cm) unit weight 434lbs (197kg) power requirements dedicated 120 volts/20 amp circuit (voltage may vary outside u.s.) life fitness integrity sl console the integrity sl console offers an intuitive cardio experience combined with a level of digital connection to fitness apps and wearables that exercisers have come to expect. get on and go functionality large led display connects to apple watch® the value of connection , life fitness upright bike + sl console w apple watch connect - aspc sl a comfortable cardio option for exercisers of all abilities. the aspire upright exercise bike has a streamlined design that efficiently pairs effective workouts with smart functionality. rooted in decades of proven durability. the generator drive system with poly-v belt resistance requires limited maintenance and also offers a smooth, quiet operation. large led display 17 to 22 workouts (depending upon base type) bluetooth® connection to heart rate straps, headphones and mobile devices wi-fi, ant+, and nfc compatibility connects to apple watch® step-over height - 21.14 (536.9 mm) max user weight- 400 lb (182 kg) drive system- generator drive system with 8-ribbed poly-v belt resistance system resistance levels - 26 resistance type - hybrid eddy current brake with brushless internal generator for low drag and high power capability belt drive - single stage drive with self-tensioning idlers for minimal mechanical drag and low maintenance dimensions - length 41.5 (105cm), width 24.5 (62cm), height 54.5 (138cm)  aspc-sl-cgcxn-12 - aspire upright bike sl base - 1 nos  slxb-cnsl-enm-01 sl bike/ct console - 1 nos , ramp up cpu dumbbell (brs2002) round urethane dumbbells are the epitome of durability, utility and aesthetics. you won’t have to worry about scratches after use and the irritating rubbery odor. manufactured with solid steel heads, surrounded by a thick, shock absorbent and an impact-resistant layer of urethane, these easy-rolling round dumbbells are recommended for fitness facilities where heavy usage takes place.  ramp up cpu dumbbell 15 kg - 1 pair  ramp up cpu dumbbell 20 kg - 1 pair  ramp up cpu dumbbell 22.5 kg - 1 pair  ramp up cpu dumbbell 25 kg - 1 pair  ramp up cpu dumbbell 27.5 kg - 1 pair  ramp up cpu dumbbell 30 kg - 1 pair  ramp up cpu dumbbell 32.5 kg - 1 pair  ramp up cpu dumbbell 35 kg - 1 pair  ramp up cpu dumbbell 37.5 kg - 1 pair  ramp up cpu dumbbell 40 kg - 1 pair  ramp up cpu dumbbell 42.5 kg - 1 pair  ramp up cpu dumbbell 45 kg - 1 pair , axiom dual lat pulldown/low row with luxury trim and double stitched upholstery ph-oplr the axiom series lat pulldown/low row accommodates two exercises that target the entire back and rear shoulder muscle groups. the clean, inviting look is appealing to all exercisers. frame • fully welded 11-gauge steel frames • electrostatic powder coat finish for maximum durability tower • consistent low profile 53” (135 cm) tower • full front (or optional rear only) weight stack shrouds adjustments • visible, color contrasting, yellow adjustment handles. • latex free rubber over molded adjustment handles. weight plates • solid steel 15 lb (7.5 kg) weight plates • push / pull increment weight: 7.5 lbs (3.75 kg) • top weight plate is fitted with self-lubricated bushings • magnetic weight selector pin locks into place biomechanics • work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. • variable cams & machine design replicate the body’s natural strength profile instructional placards • qr coded / nfc chipped placards pictorially illustrate the muscles trained, proper machine set up & use, for easy to follow instructions regardless of language. size (l x w x h): 91” x 50” x 85” metric (cm): 231 x 127 x 216 recommended live area (l x w x h): 115” x 86” x 97” metric (cm): 292 x 218 x 246 weight: 452 lbs (205 kg) *weight stack (includes increment weight): 202.5 lbs (101.25 kg) max user weight: 300 lbs (136 kg) key features: • accommodates two exercises that target the entire back and rear shoulder muscle groups • comes standard with lat pulldown bar and neutral grip row handle • foot pegs provide additional user stability during row • angled thigh pads stabilize users without the need of an additional adjustment frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , hammer strength select standing calf hs-sc the hammer strength select standing calf is a fundamental part of the strength training progression. nine pad height positions accommodate all users, and contoured non-slip foot plates allow users’ ankles to move in a full range-of-motion. the 22 pieces in the hammer strength select line provide an inviting introduction to hammer strength equipment. • dimensions (l x w x h): 58 in x 45 in x 71.5 in (148 cm x 115 cm x 182 cm) • weight: 680 lb (309 kg) • weight stack weight in kgs: 195 frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , hammer strength plate loaded v-squat pl-vsq the plate-loaded v-squat is designed to have a natural squatting motion, while reducing back and knee strain through a curved arc of motion. it also employs a standard counter balance for lower starting resistance. •starting resistance: 54 lbs (24.5 kg) •dimensions (l x w x h): 91 in x 42 in x 81 in (232 cm x 107 cm x 206 cm) •weight: 530 lb (241 kg) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , signature plate loaded incline press splip the signature series incline press uses horizontal grips to simulate a more traditional bench press, converging movements for a natural forward pressing motion, and iso-lateral movements for equal strength development. signature series plate-loaded enhances any facility and utilizes independent converging and diverging movements for an instinctively natural experience. •dimensions (l x w x h): 50 in x 62 in x 75 in (127 cm x 158 cm x 191 cm) •weight: 297 lb (135 kg) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , axiom dual leg extension/leg curl with luxury trim and double stitched upholstery ph-oplce a selectorized station that effectively works complimentary leg muscle groups. designed to be intuitive and inviting for exercisers of all abilities. single-pin adjustment allows exercisers to simultaneously adjust seat and back pad roller pads adjust in 4 positions to accommodate varying tibia lengths hand grips provide user with additional stability during movement footprint (l x w x h)56 x 40 x 53 (metric cm: 142 x 102 x 135) recommended live area (l x w x h)98 x 64 x 77 (249 x 163 x 196) weight450 lbs (204 kg) weight stack(includes increment weight)202.5 lbs (101.25 kg) max user weight300 lbs (136 kg) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , hammer strength plate loaded iso-lateral low row il-lr the plate-loaded iso-lateral low row was blueprinted from human movement. separate weight horns engage independent diverging and converging motions for equal strength development and muscle stimulation variety. it provides a unique path of motion that contrasts with the decline press. dimensions (l x w x h)50 in x 48 in x 66 in (127 cm x 122 cm x 168 cm) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , signature plate loaded row splrow •dimensions (l x w x h): 55 in x 57 in x 54 in (140 cm x 145 cm x 138 cm) •weight:294 lb (134 kg) frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , axiom dual abdominal/back extension with luxury trim and double stitched upholstery ph-opabba the axiom series abdominal/back extension is a 8 work arm adjustments allow users a variety of start positions frame • fully welded 11-gauge steel frames • electrostatic powder coat finish for maximum durability tower • consistent low profile 53” (135 cm) tower • full front (or optional rear only) weight stack shrouds adjustments • visible, color contrasting, yellow adjustment handles. • latex free rubber over molded adjustment handles. weight plates • solid steel 15 lb (7.5 kg) weight plates • push / pull increment weight: 7.5 lbs (3.75 kg) • top weight plate is fitted with self-lubricated bushings • magnetic weight selector pin locks into place biomechanics • work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. • variable cams & machine design replicate the body’s natural strength profile instructional placards • qr coded / nfc chipped placards pictorially illustrate the muscles trained, proper machine set up & use, for easy to follow instructions regardless of language. size (l x w x h): 58” x 45” x 53” metric (cm): 147 x 114 x 135 recommended live area (l x w x h): 94” x 69” x 77” metric (cm): 239 x 175 x 196 weight: 519 lbs (235 kg) *weight stack (includes increment weight): 202.5 lbs (101.25 kg) max user weight: 300 lbs (136 kg) key features: • unique, workarm design allows for easy entry / exit • 8 workarm adjustments allow users a variety of start positions • two foot support positions better accommodate taller and shorter users • lumbar pad properly positions and supports users during exercise frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , life fitness multi adjustable bench ph-lbr-ma (smab) experience precision adjustments, effortless transport, and unrivaled comfort and style with the life fitness multi-adjustable bench. max user weight: 300 lbs (136 kg) max training weight: 500 lbs (227 kg) back adjustments: -10°, 0°, 15°, 30°, 45°, 60°, 70° seat adjustments: 0°, 15°, 30° weight: 110 lbs (50 kg) size: 58” x 29” x 17” (147 x 73 x 43 cm) frame colour: standard colour upholstery colour: standard colour , ramp up olympic junior 5ft bar ramp up olympic junior 5ft bar , ramp up olympic training barbell brs4004 (women) introducing the all new ramp up powerlifting training bar with single powerlifting knurl marks and centre knurling. with its 29mm shaft diameter and exceptional tensile strength, it offers minimal flex and whip, establishing itself as the ultimate workhorse for bench presses, squats, and deadlifts. get ready to revolutionise your training and elevate your performance to unparalleled heights. women bar, 2010mm length 25mm diameter 8 bearings. bar shaft and sleeve by hardened chrome , ramp up ez curl bar brs4007 (black) ramp up ez curl bar brs4007 (black) , ramp up cpu grips weight plate (brs1007) each plate is derived from heavy-duty iron with a solid, high-grade, low-bounce rubber cover surrounding the parameter. product type: regular cpu weight plate each weight features grip holes to provide a secure grip during use. the coating ensures a durable, reliable weight that will last through grueling workouts & the raised numbers help to easily identify weight sizes. weight plates can be used to perform muscle strengthening exercises and endurance training, and to increase flexibility and balance. a single weight plate can also be used for warm-up exercises.  ramp up cpu grips weight plate 5 kg (brs1007) - 4 nos , ramp up cpu grips weight plate (brs1007) each plate is derived from heavy-duty iron with a solid, high-grade, low-bounce rubber cover surrounding the parameter. product type: regular cpu weight plate each weight features grip holes to provide a secure grip during use. the coating ensures a durable, reliable weight that will last through grueling workouts & the raised numbers help to easily identify weight sizes. weight plates can be used to perform muscle strengthening exercises and endurance training, and to increase flexibility and balance. a single weight plate can also be used for warm-up exercises. , ramp up cpu grips weight plate (bmrs1007) each plate is derived from heavy-duty iron with a solid, high-grade, low-bounce rubber cover surrounding the parameter. product type: regular cpu weight plate each weight features grip holes to provide a secure grip during use. the coating ensures a durable, reliable weight that will last through grueling workouts & the raised numbers help to easily identify weight sizes. weight plates can be used to perform muscle strengthening exercises and endurance training, and to increase flexibility and balance. a single weight plate can also be used for warm-up exercises.  ramp up cpu grips weight plate 15 kg (brs1007) - 4 nos , ramp up cpu grips weight plate (brs1007) each plate is derived from heavy-duty iron with a solid, high-grade, low-bounce rubber cover surrounding the parameter. product type: regular cpu weight plate each weight features grip holes to provide a secure grip during use. the coating ensures a durable, reliable weight that will last through grueling workouts & the raised numbers help to easily identify weight sizes. weight plates can be used to perform muscle strengthening exercises and endurance training, and to increase flexibility and balance. a single weight plate can also be used for warm-up exercises.  ramp up cpu grips weight plate 20 kg (brs1007) - 4 nos , axiom dual multi press with luxury trim and double stitched upholstery ph-opmp the axiom series multi press is a triple-functioning design allows for chest press, incline press and shoulder press movements in a natural body position frame • fully welded 11-gauge steel frames • electrostatic powder coat finish for maximum durability tower • consistent low profile 53” (135 cm) tower • full front (or optional rear only) weight stack shrouds adjustments • visible, color contrasting, yellow adjustment handles. • latex free rubber over molded adjustment handles. weight plates • solid steel 15 lb (7.5 kg) weight plates • push / pull increment weight: 7.5 lbs (3.75 kg) • top weight plate is fitted with self-lubricated bushings • magnetic weight selector pin locks into place biomechanics • work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. • variable cams & machine design replicate the body’s natural strength profile instructional placards-------------• qr coded / nfc chipped placards pictorially illustrate the muscles trained, proper machine set up & use, for easy to follow instructions regardless of language. size (l x w x h): 68” x 54” x 62” metric (cm): 173 x 137 x 157 recommended live area (l x w x h): 92” x 78” x 86” metric (cm): 234 x 198 x 218 weight: 539 lbs (245 kg) *weight stack (includes increment weight): 202.5 lbs (101.25 kg) max user weight: 300 lbs (136 kg) key features: • triple-functioning design allows for chest press, incline press and shoulder press movements in a natural body position • a single-pin, gas-assisted mechanism allows for easy, light-weight seat and back pad position adjustments simultaneously for the different exercises. • work arm adjusts in 7 positions for multiple pressing angles to accommodate users size and preference. • multiple grip locations accommodate for different user sizes frame colour: standard colour upholstery colour: standard colour working arm colour: standard colour frame , life fitness cable motion dual adjustable pulley 2:1 - op-dap this multi-exercise machine offers nearly limitless strength training options. the axiom series dual adjustable pulley is a centerpiece for individual workouts, personal training sessions, and small group training. the inviting design with center positioned weight stacks has an open feel and narrow footprint to optimize valuable floor space. the axiom series dual adjustable pulley features an ergonomic pull-up bar that offers several grip positions, and 90 of cable that allows for a wide range of user-defined movements and strength training possibilities. the axiom series dual adjustable pulley includes: one pair of long adjustable handles, one ankle strap and a triceps rope. cable & pulleys • 7 x 19 strand construction, lubricated, nylon-coated cables. • 4.5-inch diameter fiberglass-impregnated nylon pulleys with sealed ball bearings. biomechanics • work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. • variable cams & machine design replicate the body’s natural strength profile size (d x w x h): 55” x 56” x 84” metric (cm): 140 x 142 x 213 recommended live area (d x w): 109” x 184” x 102” metric (cm): 277 x 467 x 259 weight: 718 lbs (326 kg) weight stack: standard: 2 – 165 lb (2 – 75 kg) stacks resistance ratio: 1:2 effective user resistance: key features: • 90” (228 cm) of cable travel to accommodate full body movements • ergonomic pull-up bar with neutral, chin up, and pull up grip positions • optimized weight stack position to minimize product width without sacrificing function • accessories included: one pair of long adjustable handles, one ankle strap and one triceps rope frame colour: standard colour upholstery colour: standard colour , life fitness sl powermill climber w apple watch connect - black onyx premium inpmsl the integrity sl console offers an intuitive cardio experience combined with a level of digital connection to fitness apps and wearables that exercisers have come to expect. connects to apple watch® wi-fi, ant+, and nfc compatibility 17 total workouts. elevation goal workouts let the exerciser take their mind off of the burn and allow them climb as high as they can. bluetooth® connection to heart rate straps, headphones and mobile devices an ac motor provides an extremely wide range of speeds. from 12 – 185 steps per minute, the motor’ offers options to all exercisers, whether they’re engaging in reconditioning or hiit workouts. accessory holder integrated smartphone accessory tray with removable cup holders transport wheels four wheels for easy mobility step space 205 sq. in. (0.132 sq. m) step width 20.75 (53 cm) step depth 9.875 (25 cm) step height 7.5 (19.05 cm) step-up height 10.5” (25.4 cm) handlebar design bullhorn resistance technology - drive system surestep system technology, 4.0hp motor/motor controller assembled dimensions 55.9 x 32.8 x 82.3 (143 x 84 x 210 cm) max user weight 400 lbs (181 kg) unit weight 473lbs (215kg) ceiling height required 9 (2.7 m) one floor climbed 16.25 steps safety dual braking system, & recovery modespm 12-185 resistance level 26 (0-25) entry / exit (auto-stop function) dual step-assist & auto-detect feature  slp-cnsl-enm-01 powermill sl console - 1 nos  inpmsl - (base - black onyx) - 1 nos , life fitness treadmill + sl console with apple watch connect - black onyx premium int-sl deck type dx3™ running surface width 22 (56 cm) running surface length 60 (152 cm) motor 4hp (8.0hp peak) ac motor------------------bluetooth®, ant+ and nfc work to provide connection to wearables, headphones, heart rate straps and more. this advanced console technology allows exercisers to workout the way the want. 22 total workouts. highlights include high-intensity and endurance intensity to help runners improve speed and endurance. exercisers can also challenge themselves with eight different fitness tests, including those used by the army, navy, marines and air force.  ph-intdsl-m-ecb (base - black onyx) - 1 nos  slt-cnsl-enm-01 - sl tread led console english metric - 1 nos  int-sl-blkhf-14 - 1 nos  intde-allhx-02 - (black base) - 1 nos  intde-basekit-5102 - 1 nos speed range 0.5 – 14mph (0.8 – 23 km/h) in 0.1 increments step-up height 8 (20 cm) incline 15% max user weight 400lbs (181 kg) length 82 (208 cm) width 36 (91 cm) height 56 (142cm) unit weight 434lbs (197kg) power requirements dedicated 120 volts/20 amp circuit (voltage may vary outside u.s.) life fitness integrity sl console the integrity sl console offers an intuitive cardio experience combined with a level of digital connection to fitness apps and wearables that exercisers have come to expect. get on and go functionality large led display connects to apple watch® the value of connection , life fitness upright bike + sl console w apple watch connect - aspc sl a comfortable cardio option for exercisers of all abilities. the aspire upright exercise bike has a streamlined design that efficiently pairs effective workouts with smart functionality. rooted in decades of proven durability. the generator drive system with poly-v belt resistance requires limited maintenance and also offers a smooth, quiet operation. large led display 17 to 22 workouts (depending upon base type) bluetooth® connection to heart rate straps, headphones and mobile devices wi-fi, ant+, and nfc compatibility connects to apple watch® step-over height - 21.14 (536.9 mm) max user weight- 400 lb (182 kg) drive system- generator drive system with 8-ribbed poly-v belt resistance system resistance levels - 26 resistance type - hybrid eddy current brake with brushless internal generator for low drag and high power capability belt drive - single stage drive with self-tensioning idlers for minimal mechanical drag and low maintenance dimensions - length 41.5 (105cm), width 24.5 (62cm), height 54.5 (138cm)  aspc-sl-cgcxn-12 - aspire upright bike sl base - 1 nos  slxb-cnsl-enm-01 sl bike/ct console - 1 nos , ramp up cpu dumbbell (brs2002) round urethane dumbbells are the epitome of durability, utility and aesthetics. you won’t have to worry about scratches after use and the irritating rubbery odor. manufactured with solid steel heads, surrounded by a thick, shock absorbent and an impact-resistant layer of urethane, these easy-rolling round dumbbells are recommended for fitness facilities where heavy usage takes place.  ramp up cpu dumbbell 15 kg - 1 pair  ramp up cpu dumbbell 20 kg - 1 pair  ramp up cpu dumbbell 22.5 kg - 1 pair  ramp up cpu dumbbell 25 kg - 1 pair  ramp up cpu dumbbell 27.5 kg - 1 pair  ramp up cpu dumbbell 30 kg - 1 pair  ramp up cpu dumbbell 32.5 kg - 1 pair  ramp up cpu dumbbell 35 kg - 1 pair  ramp up cpu dumbbell 37.5 kg - 1 pair  ramp up cpu dumbbell 40 kg - 1 pair  ramp up cpu dumbbell 42.5 kg - 1 pair  ramp up cpu dumbbell 45 kg - 1 pair
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
49.
Defence #11104420 AOC
Tender For Repairs / Re-Novation Of Ofti And Ofti Work Shop Buildings Inside Factory Area At Ofmk.; 1 Site clearence 2 FELLING OF TREE: Felling of tree exc.30 cm and not exc.100 cm girth including cutting of trunk and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50m and clearing site 3 GRUBBING UP TREE TRUNK : Grubbing up tree trunk of girth exceeding 100 mm and not exceeding 150 mm, including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable materials and removing of unserviceable materials to a distance n. exc. 50 m and clearing site. 4 Demolition of cement concrete of any description and in any position not otherwise specifically provided for.Complete all as specified directed. 5 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar. Complete all as specified directed. 6 Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Complete all as specified directed. 7 Dismantling floor,heartor wall tiling including cement mortar bedding but nor baking removing serviceable tiles to stores and rubbish off the premises.Complete all as specified directed and directed. 8 Taking down : Taking downcement or cement lime plaster, any description on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. 9 Removing building materials etc.other than spoilupto a distance of 1.0 Km, including loading, unloading and stacking at the destination. 10 Brick work with sub class ‘B’ bricks straight or curved in plan with 1:6 cement mortar.Complete all as specified and directed. 11 Stone Masonry : Walling of Squared Rubble regular coursed Stonemasonry, well bonded, bedded and solidly hearted built in with 1:6 cement mortar, Complete in all respects as specified and directed. 12 Damp proof course to horizontal or vertical surfaces In cement concrete 1:2:4, type B-0, 40 mm thickincluding necessary formwork . 13 Flush Pointing with 1:4 cement mortar to square rubble, coursed, well bonded and solidly hearted built in cement mortar as directed. 14 Vitrified tiles : Supply and laying of Light shade vitrified tiles 10 mm thick (Square/Rectangle) polished , area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Floor tile finishglossy/mat/ antiskid will be as decided by EIC. Complete all as specified and directed . Make : Johnson, Orient bell, AGL as approved by EIC. 15 GRANITE : S&F Granite 25 mm thk (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed. 16 FLOOR TILING :Supply & fixing Coloured non skid ceramic tiles in flooring, 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell 17 SCREED BED : Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6. Complete all as specified and directed. 18 Plastering : Rendering of 10mm thick plastering with 1:6 cement mortar on fair faces of brick work or concrete surfaces. Complete in all respects as specified and directed. 19 Rounding to edges of stone slabs / granite one edge,such as in steps, cooking platform, and other similar situations. Complete all as specified and directed. 20 Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc. complete as directed by EIC. 21 Taking down wooden wall panelling of any description and similar work as directed. 22 Snap grid : Supply and fixing of 605x605 mm snap gridGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners withand including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediatechannel with connecting clips across the intermediatechannel at 457 mm centre to centre. Complete all as specifiedand directed, Make : Armstrong 23 Supply and fixing of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. 24 POP ceiling : Providing 10 mm thick plaster of Paris(gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mmwith 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately). Complete all as specifiedand directed, Make : Armstrong 25 Ceiling board : (M&L) S&F Exposed metal frame ceiling with calcium silicate boardof siliceous and calcareous material reinforced with cellulose fibre / PVC laminated gypsum tiles with MPL film on rear side, 8 mm thk.for fixing in 600 mm x 600mm grid,Make: Gyproc/ La gyp 26 Door shutter repair : Taking down door shutter of any description exc. 1 sqm and not exc. 2 sqmand repairing and adjusting to the required size including fixing builders hard ware and refixing to the same opening. complete all as specified and directed. 27 Dismantlingof structural steel work including doors, gates, but excluding framed truss etc. Complete all as specified directed. 28 UPVC window / Ventelator : Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension . Complete all as specified and directed. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, 29 UPVC window : Three track three panels sliding window with fly proofS.S wire mesh (Two nos. glazed & one no. wire meshpanels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Areaof window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity tobe 40 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drillingof holes for fixing hardwares and drainage of wateretc. After fixing frame the gap between frame andadjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required sizeand of approved quality, complete all as specified anddirected by Engineer-in-Charge. 30 UPVC door : Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proofS.S. wire mesh (Two nos. glazed & one no. wire meshpanels) made of (big series) frame 116 x 45 mm & sash46 x 82 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead/ double glazingbead of appropriate dimension. (Area of door above2.00 sqm upto 5.00 sqm) comprising of uPVCchambered frame, with in-built roller track and sashextruded profiles duly reinforced with 1.60 + 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionuPVC extruded glazing beads, uPVC extrudedinterlock and uPVC extruded Inline sash adaptor (ifrequired), EPDM gasket, wool pile, zinc alloy (whitepowder coated) handle with key on one side of extremepanels along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zincalloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustabledouble nylon rollers (weight bearing capacity to be120 kg), G.I fastener 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, including drilling ofholes for fixing hardwares and drainage of water etc.After fixing frame the gap between frame and adjacentfinished wall shall be filled with weather proof siliconsealent over backer rod of required size and ofapproved quality, complete all as specified anddirectd. 31 steel wire cloth : Supplying and Fixing in repairs stainless steel wire cloth0.36mm nominal dia.(Guage 28) of wire and width of aperture 1.4mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed 32 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.0 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 33 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.8 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 34 Wooden Wall panelling : S & F of Prelaminated particle board18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. Complete as specified and directed at site. 35 Wooden panelling frame work : S&F of battens frame work using wooden clean sawn 2nd class soft wood battens of cross sectional area exc. 15 & not exc. 25 sq.cm at a spacing of 35 centres. Complete as specified and directed at site. 36 PCC paving : PCC 1:4:8 in floors/ pavingoftype D-2, 1:4:8 with 40mm graded aggregate,100 mm thick.Complete all as specified and directed. 37 Earth work in excavation in all kind of soils by mechanical means (Hydraulic excavator) means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge 38 Soling (or sub base) of spread thickness 150 mm with broken boulders or quarried stone, inter sticesfilled, surface formed and rolled and consolidated torequired gradient and camber. Complete all as specified and directed. 39 Hard core with broken stone/boulders of gauge not exc. 63mm, deposited, spread leveled in layers not exceeding 15 cm thick, and watered consolidated to required gradient & camber including watering. Complete all as specified and directed. 40 Moorum filling in floors or pavings laid in layers not exe. 15cm thick , spread leveled and rammed including watering. Complete all as specified and directed 41 Stone sett flooring (M&L) with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 42 Edge stones to flooring (M&L) with stone setts of size 250 to 300mm long x l50 to 200mm wide, and 450mm deep and and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 43 PCC paving : PCC 1:2:4 in floors/ pavingoftype B-2, with 40mm graded aggregate, 100 mm thick. Including finishing concrete surface even and smooth surface without using extra cement.Complete all as specified and directed. 44 Wearproof topping 20 mm thick using CC 1:2:4, as specified incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner). Complete all as specified and directed. 45 Supply of metalic floor hardener 46 Surface excavation not exceeding 30 cm deepand averaging 20 cm deep in hard / dense soil and getting out. Complete all as specified and directed 47 PCC FLOORING : Cement concrete of 100 mm thickness in floors, sub-floors, sub-bases, pavings etc. oftype B-1, 1:2:4 (20 mm graded aggregate) 48 Smoth finish : Finishing cement concrete surface even and smooth using extra cement. 49 CC Paver blocks : S&F of Machine pressed precastconcrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement & pigment (Coloured)Complete all as specified and directed. 50 CC chequered tiles :S&F of cement concrete chequered tiles with grey pigment cement and pigments(Coloured tiles) for pavements. size of tile 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors.Complete all as specified and directed. 51 PCC paving : PCC 1:3:6 in floors/ pavingof type C-2, with 40mm graded aggregate, 100 mm thick.Complete all as specified and directed. 52 Forming 12mm thick Expansion joints for 100 thick slabsfilled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A. ’ Complete all as specified and directed. 53 Structural steel (S&F) : Structural steel work confirming to Fe-410 W (Gde-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, including application of one coat of Zinc chromate primer paint .Make:TATA, Jindal 54 Structural steel (S&F) : Structural steel work Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Steel confirming to Fe410W (Gde E-250 quality A). Make : TATA, Jindal, Complete all as specified directed. 55 Structural steel (S&F) : Mild steel bolts. purpose made. of dia. of neck n.exc. 12 mm with hexagonal orsquare head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long. Complete all as specified directed. 56 Roofing sheet : Supply and fixing of pre painted galvalume aluminium zinc coating GI basedcorrugated/ trapezoidal profile roofing sheets of thickness 0.5 mm having tensile strength of 550Mpa as in roof covering / cladding to wall with self tapping screws etc. Make : TATA / Jindal /Essar. Complete all as specified and directed. 57 Supply only of liquid water proofing compound for incorporating concrete.Make. Fosrac, BASF, SIKA 58 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating. complete as specified and directed. 59 Kerb stone : Providing precast cement concrete using Type-B1, 1:2:4 20 mm graded aggregatein window or doorcills, lintels, bressumers, steps, quoin blocks (for use with ma- sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets,etc. with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4. Complete with joints to match . Complete all as specified and directed. 60 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in roofkerbs or mud stops, rounded orchamfered on edges.complete as specified and directed. 61 PCC : Plain Cement Concrete (1:2:4) Type B2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed . 62 RCC : Reinforced cement concrete (Type B1, 1:2:4 with 20 mm aggregates) in columns, pillars, piers, posts etc. Complete all as specified and directed. 63 REINFORCEMENT : Mild steel(TMT) bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed. . 64 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 100 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 65 SWG PIPE : Supply & fixing of 100 mm dia Salt Glazed Stoneware drain pipes Grade A, including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 66 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 150 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 67 SWG PIPE : Supply & fixing of 150 mm dia Salt Glazed Stoneware drain pipeslaid in trenches including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 68 Earth work in excavation of all kind of soils by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Complete all as specified and directed . 69 Returning, filling in of excavated soils, including spreading, levelling, watering and well ramming in layersnot exc 25 cm. 70 PVC PIPE : Supply and Fixing of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid or fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 71 PVC PIPE : Supply and Fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 72 Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit iring, etc., and making good, cutting not exc 10 cm girth. Complete all as specified and directed. 73 Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat surfaces. Complete all as specified and directed. 74 S & F ofG.I. Tubes of Size 40 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 75 S & F ofG.I. Tubes of Size 25 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 76 S & F ofG.I. Tubes of Size 1/2‘’(15 mm), medium grade including all fittings to walls and ceilings or in floors/trenches. 77 Supply & Fixing Rotational moulded polyethylene water storage tanks (PVC cylindrical vertical with closed top) hoisted and fixed in position 1000 lit capacity. make : Syntex 78 BALL VALVES : 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed. 79 NAHANI TRAPS : Supply & Fixing ofCI Nahani traps 100mm with grating including jointing to went pipe with CC 1:2:4complete all as specified and directed at site. 80 GULLY TRAP : M&L for PVC/SWR gully traps, of size 125 mm x 110 mm all as directed and specified. 81 GRATING : Supply and fixing of grating doom 100 mm dia. of PTMT (min. weight 25 gms) 82 PVC D/E PIPE CONNECTION :Supply and fixing of PVC Double End Pipe connection.in repairs, size:15mm with end nuts & washers of length 600 mm. Make : Kohinoor. Complete all as specified and directed. 83 ALUMINIUMPARTITIONS : Supply and fixing complete of anodised aluminium powder coated frames for partition frames and windows etc. all complete as directed by E.I.C. 84 ALUMINIUM WINDOW SHUTTERS : Supply and fixing complete of anodised aluminiumwindow and ventilator shutters powder coated fixed type without sash bar ,aluminium section weighing 0.55 kg/m including necessary jointig cleats, glazing clips, rubber neoprane packing, handles 2 nos. in each door, hinges, anodised aluminiumsnap beading, screws etc. complete all as directed by E.I.C. 85 HINGES : Supply and fixing of extruded Al. alloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-21 of size 125mmincluding all as specified and directed . 86 Antique aldrop : Supply and fixing of 200 mm long Antique model Brass mixed heavy alloy, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.All as specified and directed and as approved by EIC. 87 Brass hinge: Supply and fixing of extruded brassalloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-11 of size 125mmincluding.All as specified and directed and as approved by EIC.. 88 Antique tower bolt : Supply and fixing of Antique model Brass mixed heavy alloy, barrel tower bolts of extruded section of size 200 mm and fixed all as directed.All as specified and directed and as approved by EIC. 89 Antique Door handle : Supply & fixing of Extruded Antique model Brass mixed heavy alloy, cast type polished bright handles 150 mm long, Complete all as specified and directed 90 TOWER BOLT : Supply and fixing of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm and fixed all as directed. 91 BOW HANDLE: Supply & fixing of Extruded aluminium alloy handles 150 mm long, fabricated type, anodised. Complete all as specified and directed 92 Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be easured separately), removing materials to store for keeping in safe custody for reuse at site and making good. 93 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) 94 point wiring:S&F / Drawing of cables in PVC pipe,OneLight point or onefan point controlled by one switch with cables 1.5 sq.mm size of copper conductor cables FR PVC single core sheathed cable 95 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 5 amps independent, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 96 point wiring: S&F /Drawing of cables to One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 97 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 15 amps independent, with cables 4.0 sq.mm size of copper conductor cables FR PVC sheathed. 98 S & F of ceiling rose,3 phase/PVC/Polycorbonate, Isolate body 99 S & F ofswitch modular type of one module, 6 amps 100 S & F ofsocket, 2/3 pin combined, 6 amps, 2 Module 101 S & F ofswitch modular type of one module, 16 amps 102 S & F ofsocket, 2/3 pin combined, 16 amps, 2 Module 103 S & F ofFan step regulator 120 W, 2 Module 104 LED LUMINAIRE :Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/ Halonix 105 S & F of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. 106 S & F of LED tube lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 107 LED Street Light :Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/Halonix.complete all as specified and directed 108 Exhaust Fan: Supplyand Fix Exhaust Fan made of sturdy Engineering plastic complete with Lauvers, Shutteers, voltage 230 V,50 HZ, RPM 1200, Copper winding ofsweep 250mm.complete all as specified and directed. 109 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) 110 Industrial socket plug: Supply and fixing of 240 V, 20 amps, single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB. 111 MCB :Supply and fixing of MCB / Isolator, 240 V, single pole 40 amp 112 MCB :Supply and fixing of MCB / Isolator, 240 V, double pole 40 amp 113 MCB D.B : S & F of Sheet Metal enclousers for D.B ofsingle doorof SPN,8 way with 200A rated bus bar,240V 114 MCCB: Suppply and fixing of MCCB 3 pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA. 115 S & F of Modular metal flush box 6 module 116 S & F of Modular white cover plate with frame 3 module 117 S & F of Modular white cover plate with frame 4 module 118 S & F of Modular white cover plate with frame 6 module 119 S & F of Modular white cover plate with frame 8 module 120 EARTHING : Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead GI strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.complete all as specified and directed 121 Earth continuity conductor : Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm GI strip. complete all as specified and directed 122 Dismantlng ofAsbestos cement (corrugated,semi corrugated, etc.) sheets in roofcoverings. Sheets shall be deposited to stores as directed. 123 Cutting or uprooting grass on old CC/brick tiles or on old mud phuska,and Taking down old Taf felt and loose material from the roof, cleaning the bitumen surface by wire brushing, washing down & disposing the pealed off tar felt muck etc. for complete as directed. removing rubbish off the premises, cleaning surface and preparing to receive new mud plaster. Complete as specified and directed. 124 Surface painting : Removal of old tarfelt sheets,Wire brushing and cleaning top surface of roof tops and surface painting, with a layer of bitumen primer for bitumen membrane @ 0.50 ltr/sqm by the same membrane manufacturere of density at 25° C, 0.87-0.89 Kg/ltr and viscosity 70-160 cps and then left the surface 4 to 8 hours for drying.Complete as specified and directed. 125 Bitumen Tack coat / Seal coat : Applying surface bitumen coat Seal / Tack coatwith lndustrial bitumen 85/25 forwaterproofingtreatments at the rate of 1.2 kg / sqm . 126 Water proofing treatment (M&L) : Rendering water proofing treatment to RCC roof slabs including vertical surfaces with APP based polymetric membrane sheet, minimum 3 kg/sqm and minimum 3.0 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) evenly laid on primed surfaces by forced applicationby torch on treatment. The vital physical and chemical parameters of the membrane shall be : Tensile strength in longitudinal and transverse direction at 23° C as 650/450/5 cm.Tear strength in longitudinal and transverse direction as 300/250 N. Softening point of membrane not less than 150° C. Cold flexibility shall be up to 2° c when tested in accordance with ASTM, D-5147. The laying of membrane shall be done through the authorised applicator of the manufacturer of membrane. Membrane make : STP / Dr. Fixt / IWL as approved by EIC. 127 Carrying and disposal of debris : Removing building materials etc. to a distance of 1.5 KM or under including loading, unloading and stacking at the destination. Complete all as specified and directed at site. 128 Rolling shutter : S&F ofSteel rolling shutters 1.25 mm thickness of lathe, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle. Complete all as specified and directed. 129 Rough excavation notexceeding1.5 m deepin drains etc in loose/soft soils andgetting out 130 Scarifying : Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc.400 sqm and the thickness Exc 50 mm and n.exc 100 mm deep 131 Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 132 Macadam : Premix bituminous, macadam with paving bitumen any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less).Complete all as specified and directed. 133 Pot holes : Repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth,making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadamusing paving bitumen, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings,6.3 mmsizeand again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm.Complete all as specified and directed. 134 Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 135 Applying evenly a priming/tack coat with bituminous primer using paving bitumen at 5kg per 10 sq metre. Complete as specifiedand directed. 136 Bituminous premixed carpet, 2.5 cm consolidated thickness, with 0.34 cu.m. of stone chippings mixed with 18.25 kg of binder (paving bitumen)per 10 sq.m and mixed in mechanical hot mix plant and laid with mechanical paver and rolled using power roller 8-10 T capacity and compacted to required camber and gradient to uniform smooth surface. Complete as specifiedand directed. 137 Supply and fixing of Machine cut cudappah stoneslab 20-25mm thick over cementscreed base, laid and jointedwith grey cement slurry mixedwith pigment to match the shadeof the slab including rubbingand polishing complete. 138 Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint and application of priming paint plaster coat. 139 Rendering synthetic enamel painting on new Steel surfacesof any description over 10 cm width or girth- TWO coats including one coat of red oxide Zinc chrome paint. Make: Asian paints/Berger 140 Complete removal existing treatment of of white washing onsurfaces of walls/ concrete. 141 Complete removal existing treatment of of white washing on surfaces of ceilings. 142 CHALK WHITENING : M&L - Chalk whitening (white cement-based, water-resistant, white wall putty) of plastered surfaces as preparatory to distempering on wall surfaces, Make : Birla wall care, complete all as specified & directed. 143 PRIMER : Priming plastered and other surfaces with alkali resistant priming paint. Make : Asion/Dulux- all as specified and directed . 144 WHITEWASH ON CEILINGS : M&L - White washing on ceilings- on old decorated surfaces- including preparation of surfaces – ONE coat of White Wash-complete all as directed. 145 WHITEWASH ON WALLS : M&L - White washing on Walls – on old decorated surfaces- including preparation of surfaces - TWO coats of White wash - complete all as directed. 146 PLASTIC EMULSION PAINT:Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint-complete all as directed. Make: Asian -Apcolite / Dulux-promise. 147 OBD : M&L - Rendering Oil Bound Distempering on old surfaces -including preparation of surfaces on walls - TWO Coats of OBD - complete all as directed. Make : Asian-tractor Uno / Berger-Butterfly / Indigo-gold. 148 External weather proof painting on walls : Material & Labour for applying Two or more coats of 100% Premium acrylic weather proof emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces. all as specified and directed, Brand : Asian apex,Berger weather shield, Nerolac Rain coat. 149 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting onOld painted Steel surfaces- surfaces of any description over 10 cm width or girth including preparation of surfaces-TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 150 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on Old painted Steel surfaces- surfaces of any description n.exc 10 cm width or girth including preparation of surfaces- TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 151 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on wooden surfaces - old surfaces of any description over 10 cm width or girth including preparation of surface - TWOCoats- all as specified and directed-Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 152 FRENCH POLISHING : French polishing on old surfaces of any description, width or girth –including cleaning and preparing the surface- One or more coats. all as specified and directed. Make : Sheenlac, sealer 153 Supply and fixing of Safety lever locks mild steel with 4 levers for rolling shutters as directed. 154 Fan Hook: Supply and Fixing of Fan hook with double anchor bolt complete fixing as per instructions of EIC. 155 IWC : IWC of approved make fixed with P trap Make: Hindware/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 156 CONCEALED FLUSHING SYSTEM : Wall mounted concealed flushing system (including frame, control plate and installation kit) with dual flush mode of capacity 10 ltrs. Make: Jaquar(Solo)/ Parryware(Prime)/ Cera(Fountain). Complete all as specified and directed. 157 MIRROR : Mirror 5 mm thk. with bevelled edge fixed with concealed screws Make: Saint Gobain/ Nilkamal/ Casa Gold. Complete all as specified and directed. 158 Switch board box with frame plate and cover plate , metal flush box18 module: Supply and Fixing of covering plates with Metal Flush box andcover plate frames of 18 module of make Legrand/ Schneider/ Havellscomplete all as specified by the EIC 159 Concertina coil & 6 straight RBT strands : Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina cross type fencing, GI steel plate & GI core wireon wall top using concertina coils stretched to approx.6 meters length at site and clipped with three nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as C clips, R.B.T clips etc.). Including additional three horizontal R.B.T strands to be fixed with vertical portion of MS angle supports as directed in site. Complete all as specified and directed at site. 160 Accoustic sheets : supply and fixing of choice colourPolyester Fiber Acoustic Board / tiles, Thickness: 12mm, for insula-tion and accoustic purposes, 60x60 cm in size, fixed to wall / ceiling surfaces on snap grid orwith nails to timber frame work or with Z bar/clips etc as specified by manufacturer.Complete all as specified and directed. 161 Floor mat: supply and fixing of choice colourNylon carpet for floors minimum 6 mm thicknesshaving better accoustic co-efficient ,fixed to floor with approved adhesiveas specified by manufacturer.Complete all as specified and directed. 162 ACP wall lining : Supply and fixing of decorative choice colour solid finished Aluminum composit panel 4.0 mm thick sheeting on external wall surfaces upto 12.0 mter heights fixed over aluminium/MS framed wall surfaces as specified by manufacturer. Cost includes ACP panel, frame work, jointing glue and scafolding etc. Complete all as specified and directed. 163 UPVC window (Single glazed panel shutter & fixed wire mesh panel): Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series)frame 47 x 50 mm & sash 47 x 68 mm both havingwall thickness of 1.9 ± 0.2 mm and single glass paneglazing bead of appropriate dimension (Area ofwindow upto 0.75 sqm.) comprising of uPVC multi-chambered frame, sash and mullion (where everrequired) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel sectionmade from roll forming process of required length(shape & size according to uPVC profile), uPVCextruded glazing beads of appropriate dimension,EPDM gasket, stainless steel (SS 304 grade) frictionhinges, zinc alloy (white powder coated) casementhandles, G.I. fasteners 100 x 8 mm size for fixingframe to finished wall, plastic packers, plastic capsand necessary stainless steel screws etc. Including SS wire mesh panel with aluminium beeding fixed to outer face window using adjustable /removable clips. Profile offrame & sash shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be alsofusion welded including drilling of holes for fixinghardwares and drainage of water etc. After fixingframe the gap between frame and adjacent finishedwall shall be filled with weather proof siliconsealant over backer rod of required size and ofapproved quality, complete all as specified anddirected by Engineer-in-Charge. 164 WALL TILES : Supply & fixing of Coloured digital glazed ceramic tiles in vertical surface 300x600 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell. 165 PVC door frame : S & F of solid WPVC Door Frame of size 100x60 mm heavy density of 11100 kg/cum and high quality PVC laminated of choice colour. Complete all specified and directed. 166 PVC door shutter : S & F of Factory Made Solid WPVCDoor Shutter with wood free EPS, 32 mm thick, heavy density 700 kg/cum and high quality PVC laminated on both side of choice colour. 167 Staircase railing : Supply and fixing of designed Stainless steel hand railing not less than 0.8 mtr height for stairs, balconies etc. using SS grade 304/316 members for balusters & rails etc. and covered with 12 mm thick tampered toughned glass. Design & model shall be as decided by EIC. Cost inclusive of glass, design and other mountings. Complete all as specified and directed. 168 Handicap grab bar : S&F of stainless steel anti slip vertical swing handicap bath room grab bar/rail with paper holder of min. 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 169 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 170 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 0.45 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 171 Wood Door : Supply and fixing of modern & designer soildTeakwood door shutters for Main Doors 32 mm finished thickness as decided by EIC . 172 EWC : Supply and fixing ofItalian Collection ceramic Floor Mount Western Commode, Rim less, One-piece for Bathrooms with Syphonic vortex Flushing system and soft closing seat cover including connection pipe.Make : Jaquar Fusion, Hindware Fabio, Cera cinova 173 WASH BASIN : Supply and fixing of Under counter Wash basin rectangle of approved make along with waste coupling, waste pipe and connection pipe, brackets etc. Make : Jaquar(Continental)/ Cera(campa)/ Parryware(Aqiline). Complete all as specified and directed. 174 URINAL : Supply and fixing ofSensor Urinal pan of approved make with auto flushing system including connection pipe, waste coupling and waste pipe Make: Jaquar(Aquisense)/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 175 PILLAR COCK : S&F ofsensorbased table top model Pillar cock with auto closing system of make: Jaquar / Hindware/ Cera. Complete all as specified and directed. 176 CONCEALED STOP COCK : S&F of CP Concealed stop cock of make : Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 177 2 WAY ANGLE COCK : S&F ofCP 2 way angle cock Make: Parryware(Uno)/ Cera(Fountain)/ Jaquar(Solo). Complete all as specified and directed. 178 EWC JET FAUCET : S&F of EWC jet faucet of make: Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 179 BIB COCK : S&F ofCP Bib cock of make: Jaquar(Solo)/Parrywaare(Uno)/ Cera(Fountain). Complete all as specified and directed. 180 SOAP DISH : S&F of SS soap dish of make Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 181 Hand drier: Supply and fixing of plastic Automatic Hot air drierfor bath rooms of approved make. Make :Orchid / Dolphy / Bajaj. Complete all as specified and directed. 182 Liquid soap dispensar: Supply and fixing of Liquid soap dispensar for bath rooms of approved make. Make :Jaquar / Orchid / Dolphy. Complete all as specified and directed. 183 Toilet paper holder: Supply and fixing of stainless steel single toilet paper roll holder of approved make. Make :Jaquar continental / Parryware sigma/ Cera Icon. Complete all as specified and directed. 184 Urinal partition : Supply and fixing of HPL (High-Pressure Laminate) urinal partitions using 12 mm thick compact board of width 400 to 500 mm and height 1200 mm of approved make and fixing with stainless steel brackts. Complete all as specified and directed. 185 Bldg.Expansion joint : Preparation of joint by grinding of groove surfae, remoal of dust, providing polymer mixed cement mortar on both sidea of groove and crack filling if any in floor level, fixing of baker rod 25x25 mm to control depth of groove, Providing and applying Nitoseal PU50 of Fosroc or equivalant having MAF 25% or above to the groove 25x12 mm. Including fixing / covering of joint with APP based polymetric membrane sheet sufficient width. Complete all as specified and directed at site. 186 Forming V grooves on granite surfacesn,exc 10mmdeep and n exc 10mm on face in steps, cooking platform, and other similar situations etc. 187 Hiring / Engage of JCB for cleaning, moving and loading materials like sand, gravel, or demolitionand removal of debris and other miscellaneous purposes as directd. The rate includes diesel and driver required to run the vehicle. 188 Carpet grass : Supplly and laying of carpet grass on levelled soil surface including preparing the soil bedby loosning the base ground 100 mm thick and removing old unwanted grass if any and necessary watering as directed. 189 Supply and laying of red earth / soil in loose state which is free from debris, grass and other vegitation to be used for gardening purposes as directed. 190 Architectural design : Before commencement of work Contractor should take architectural consultancy servies for entrance arch at the entrance gate, building front elevations and garden designs by authorised institutions / authorised Designer. Complete all as directed by EIC
Contract Date: May 16, 2026 Contract Value : ₹ 3.98 Crore
Government Departments No of Bidders 4
Telangana View Result →
50.
Health and Family Welfare #11104059 AOC
E Tender For Procurement Of Kits, Chemicals And Reagents For Two Years From The Date Of Award Of Contract (Aoc) And Its Extension, If Required , Acetone , Acetone Free Methyl Alcohol , Ahg (Coombs) Test Card - Gel System , Albumin - Test Kit , Alkaline Phosphatase - Test Kit , Ammonium Sulphate Powder , Amoxicillin Antibiotic Disc , Amylase - Test Kit , Anti D Serum (Igg) , Antiseptic Lotion 15% Cetrimide W/V + Chlorhexidine Gluconate Soln. I.P. 7.5% V/V(Container Of 5 Litres) , Aso Latex Agglutination Kit , Benedict Solution , Brain Heart Infusin Agar , Brain Heart Infusin Broth , Calcium Reagent Test Kit , Canada Balsam , Cedarwood Oil , Cefixime Antibiotic Disc , Ceftriaxone /Salbactum Antibiotic Disc , Cholesterol - Test Kit , Cloxacillin Antibiotic Disc , Coombs Diluents (Gel System) , Cpk (Mb) Test Kit , C-Reactive Protein (Immunoterbedimetric) - Test Kit , Creatinine -Test Kit , Cresol With Soap Solution 50% I.P. , Dengue Igm Capture Elisa Kit, Specification As Per Nit , Dengue Ns1 Antigen Detection Kit (Elisa) , Developer (X-Ray Film) , Disinfectant Fluids (Black), Phenolic Type, Grade 3 (Rw Coeff 5-7) Is 1061:1997 , Durhams Tube , Ethanol 95% V/V (Rectified Spirit) - 100 Ml , Ethanol 95% V/V(Rectified Spirit) – 500 Ml , Ether Solvent , Fixer (X-Ray Film) , Formaldehyde Solution Ip , Formaldehyde Tablet , Ft3- Elisa , Ft4- Elisa , Giemsa Stain 25 Gm. , Glucose-6-Phosphate Dehydrogenase - Test Kit , Glutaraldehyde Solution 2% For Instrument Sterilization , H2s Strip Kit , Hand Disinfactant : Each 100 Gm Soln. Contains : 2- Propanol- 45G, 1-Propanol- 30G, Ethyl-Hexadecyl- Dimethyl - Ammonium Ethyl Sulphate - 0.2 G - 100 Ml Bot. , Hand Rub Soln.: 0.5% W/V Chlorhexidine Gluconate & 70 % Ethanol , Hdl Cholesterol - D (Immunoterbedimetric) Test Kit , Hydrogen Peroxide With Silver Nitrate Solution For Hospital Use. , Immension Oil 30 Ml. , Isoprophyl Alcohol Ip 70% V/V , Kit For Early Diagnosis Of Pregnancy By Immunological Method (Hcg) , Ldl Direct Diagnostic Kit. , Leishman Stain Soln. , Lipase Test Kit , Lomefloxacin Antibiotic Disc , Mac Conkey Agar , Methyl Alcohol 500Ml. , Micro Protein Test Kit , Mueller Hintone Agar , Paraffin Wax 58 C To 60 C , Paraffin Wax 60 C X 62 C , Peptone , Puriffied Water I.P. , Rapid Diagnostic Kit For Kala-Azar (Rk-39) , Rpr (Rapid Plasma Reagin) Kit, Specification As Per Nit , Sgot Test Kit , Sgpt Test Kit , Simmons Citrate Agar , Sodium Hypochlorite – 500 Ml Bot. , Sodium Hypochlorite 5% Solution , Surface Disinfactant Soln (Each 100 Gm Contains: 1,6 Di-Hydroxy 2,5 Di-Oxyhexane (Chemically Bound Formaldehyde ) - 11.2 Gms , Glutaraldehide 5 Gm , Benzalkonium Chloride 5 Gm, Alkyl Urea Derivatives 3 Gms , Tcbs Agar , Total Protein Test Kit , Tri Sodium Citrate , Triglyceride Test Kit , Tsh - Elisa , Tsi Agar , Typhoid Igm Test Kit , Urea - (Gldh) Reagent Kit , Urea -(Berthelot) Reagent Kit , Urea Agar Base , Uric Acid Test Kit , Uristix (10 Parameters) , Vdrl Kit - Latex Kit , Widal Antigen Test Kit , Xld Agar , Xylene , Important Note: 1. All Prospective Bidders Are Requested To Quote The Rate In Boq As Per Accounting Unit & Item Specification As Mentioned In The Table-A. Wrong Quoting Of The Rate In Boq Will Be Dealt With As Per Penal Provisions Of The T&C Of The Tender. 2. Tendered Quantity Is Just A Tentative Quantity And Should Not Be Treated As Final. It May Increase Or Decrease, As Per Need Of The State. Keeping This In Mind, The Supplier Is Not Allowed To Seek Termination Of The Rate Contract After Finishing Supply Of Tendered Quantity. 3. Quality Of The Product Supplied, May Be Ascertained By Testing / Physical Examination By The Experts At Any Stage Of The Tender Period. 4. The Prospective Bidders Of The Said Tender Are Requested To Make A Declaration In Affidavit Under Annexure Vi(B)In Case Of Sole Manufacturer/Importer (I.E. Proprietary In Nature). 5. If The Item(S) Under Sole Manufacturer / Importer Is (Are) Proprietary In Nature, Quarterly Intimation Is Solicited From The Approved Bidders Positively Regarding The Status Of Their Item(S) Proprietary In Nature, Otherwise Their Item(S) Will Be Blocked In The Smis.
Contract Date: May 18, 2026 Contract Value : ₹ 21
Government Departments No of Bidders 39
West Bengal View Result →
TenderDetail
Loading tenders