View Bid Results For Moulded Trough Tenders

We found 282 Bid Results related to moulded trough tenders. You can find Contractor details who won moulded trough tenders along with contract details in Bid awards announcements section.

Filters
Stage
269
8
5
Tender Publishing Platform
18
264
State / UT
29
39
32
20
18
16
15
13
12
11
10
9
8
8
8
7
7
6
6
5
5
5
4
4
3
3
3
3
1
1
Contract Value
14
9
221
38
Publish Date
3
0
0
0
0
Sector
6
269
8
2
1
1
1
Ownership
4
268
9
3
2
Within keyword
Active filters:
Showing 1–6 of 282 tenders matching your filters
1.
Defence #11392756 Technical Bid
Tender for Demolition Of Brick Work /Stone Masonry Masonry Built In Cement Mortar Of Any Description Complete All As Specified And As Directed. , Demolition Of Stone Slabs And Tiles Laid Dry And Dry Or Pointed Of Any Description Or Thickness Infloors, Aprons Etc Complete All As Specified And As Directed. , Taking Down Shutters Of Any Description Exc 1 Sq. M And N Exc 2 Sq. M Each Removing To Store Complete All As Specified And As Directed. , Demolition Of Cement Concrete And Paving Not Exc 15 Cm Thick (Below Or Above Ground Level) Complete All As Specified And As Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Area N.Exc. 1.5 Sqm Including Builders Hardware Each Complete All As Specified And As Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Area Exceeding 1.5 Sqm But Not Exceeding 4 Sqm Each Including Builders Hardware Complete All As Specified And As Directed. , Dismantling Plain Or Corrugated Steel Sheeting Any Gauge Thickness Including Nanital Or Similar Pattern Roof Covering Complete All As Specified And As Directed. , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Etc Complete All As Specified And As Directed , Dismantling Wall And Ceiling Boards Or Insulation Boards, Any Thickness, Any Description, Including Cover Fillets Complete All As Specified And Directed. , Taking Down Cement Plaster Of Any Description Hacking For Key Or Raking Out Joint On Old Brick Work/ Stone /Concrete Surface Etc Complete All As Specified And As Directed , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding But Not Backing Complete All As Specified And As Directed. , Excavating In Post Holes (Or Similar Holes) Each Not Exceeding 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50M And Making Good Surfaces In Soft/Loose Soil Complete All As Specified And As Directed. , Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Under Bedding For Interlocking Tiles Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete Type D-2 1:4:8 (With Using 40 Mm Graded Stone Aggregates) As In Foundations And Mass Concrete Etc Complete All As Specified And As Directed , Material And Labour For Providing Cement Concrete Type B0 1:2:4 (Using 12.50Mm Graded Stone Aggregate) In Copings, Parapets And, Kerbs, Water Troughs/ Chajjas And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed , Material And Labour Brickwork (Old Size Brick) With Sub Class ‘B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar 1:4 Etc Complete All As Specified And As Directed , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc To Any Radius In Half Brick Thick Walls Built In Built In Cm 1:4 Complete All As Specifed And Directed , Material And Labour 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Jambs, Pillars, Window- Cills,Cooking Platforms, Working Table And Like Over 20 Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:4), Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite , Material And Labour For 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) For Wall Lining (Veneering To Wall) 10Mm Thick In Cement Mortar (1:3) And Pointing With White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. , Supply And Fix 30 Mm Thcik Flush Shutters, Solid Core Construction, With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides Complete All As Specified And As Directed. , Supply And Fix 30Mm Thick 2Nd Class Hw Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc.Divided Into Squares, With Plain,Chamfered Or Rounded,Mitred And Rebated Sash Bars,Any Numbers, Edges Of Framing Plain,Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass,Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed. , Supply And Fix Solid Pre Lam Pvc Door Frame/Chowkhat Of Size 50 X 47Mm Made Out Of 5Mm Prelam Pvc Sheet Reinforced With M.S. Square Tube 15Mm X 15Mm. The Two Vertical Door Profiles Are To Be Reinforced With 40Mm X 20Mm Ms Tube 19 Guage. Door Frame Need To Be Fixed To Wall Using 100 Mm Long Ms Screws Etc Complete. , Supply And Fix Factory Made Solid Panel Pre Lam Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes 19 Guage Thickness And Size Of 40Mm X 20 Mm For Stiles, Top,Bottom And Lock Rails. M.S. Frame Shall Be Covered With Heat Moulded Prelam Pvc ‘C Channel Having A Pvc Sheet Strip Of 30Mm Width Stuck Inside With Solvent Cement. 110 Mm Width Forming Stiles In Which 100Mmm Should Be Flat And 5 Mm Should Be Tapered, And 5 Mm Thich, 135 Mm Wide Prelam Pvc Sheet For Top And Bottom Rail In Wchich 125 Should Be Flat And 5 Mm Should Be Tapered On Either Side Of Panel, Also For Lock Rail 145 Mm Sheet, 125 Should Be Flat And 5 Mm Tapered On Either Side. And Additional 5 Mm Thich Pvc Strip Struck Inside Of C Channel. And Prelam Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Prelam Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement Etc Complete , Supply And Fix 100 Mm Size Stainless Steel Butt Hinges, Complete All As Specified And As Directed. , Supply And Fix 200 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section Complete All As Specified And As Directed. , Supply And Fix 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section Complete All As Specified And As Directed. , Supply And Fix 150 Mm Extruded Aluminum Alloy Handles, Fabricated Type, Anodized Complete All As Specified And As Directed , Supply And Fix 300 Mm Long Aluminum Alloy Anodised Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Steel, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminum Alloy Complete All As Specified And As Directed. , Supply And Fix Stain-Less Steel Wire Cloth, 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Stainless Wire Staples Complete All As Specified And As Directed. , Supply And Fix As In Repair Aluminium Extuded Section Body Door Closer Hydraulically Regulated, Designation No. 3,Universal Type, Suitable For Door Shutters Of 851 To 1000 Mm In Width And Of Weight Between 61 To 80 Kg Complete All As Specified. , Taking Down And Refixing Aluminium Window, Shutters And Making Unserviceable Shutter To Serviceable Shutter (Which Incls Replacing Roller,Rubber Beading Etc) Complete All As Specified And Directed. , Providing And Fixing Powder Coated Aluminium (Minimum Thicknesss Of Powder Coating 50 Micron) Work For Doors, Windows, Ventilators And Partitions (Fixed Portions) With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Confirming To Is-733 And Is- 1285, Fixed With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E At Top, Bottom And Sides With Required Epdm Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 105Mmx60mmx1.25Mm With Double Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified, Supplied And Fixed , Supply And Fix Pressed Steel Frames For Doors Of Size 125Mmx60mmx1.25Mm With Single Rebate Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified, Supplied And Fixed , Material And Labour For Structural Steel Work With Rolled Mild Steel Sections As In Main And Cross Beams, Hip And Jack Rafters, Trusses, Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Conforming To Fe-290 (Gde E-165) Quality A Complete All As Specified And Directed. , Supply And Fix Framed Work Such As Grills, Gratings, Etc.. With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.Gde-E-165 Complete All As Specified And Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Complete All As Specified And As Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified And As Directed Note: To Be Executed For Provison Of Ridges And Hips, Valley Etc Complete All As Specifed And As Directed , Supply And Fix Suspended False Ceiling Using E-Grid 2430, 180 Gsm (Exposed Ceiling Suspension System ) Of Grid Size 600Mmx600 Mm With Main Runner 32 Mm X 24 Mm And Wall Angle 24Mm X 24Mm Using 4Mm Thick High Pressure Stean Crude Everest Non Asbestos Fiber Cement Plain Board (E-Board Classic) In & Including A Grid Of Gi System Duly Suspended With 4Mm Dia Gi Wire Hanger Fixed With Steel Dash Fasteners Or Iron Purlin From The Roof With Adjustment Clip Providing Positions For Light Fixtures,Air Conditioning Diffuser And Ducts ,Sprinkler ,Smoke Detectors Etc.The Main Runners To Be Secured To Structural Soffits By Hanger @ 1220 Mm Maximum C/C. The Last Hanger At The End Of Each Main Runner Should Not Be Placed At More Than 450Mm From The Adjucent Wall,Flush Fitting 1220 Mm Cross Tee To Be Interlocked Between Main Runners @ 610Mm C/C,So As To Form 600Mm X 600 Mm Grid Complete All As Specified And Directed. , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 60 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:6) Complete All As Specified And Directed. , Supply And Fix For Exterior Grade, Coloured Glossy Finish Rubber Pressed, Cement Concrete Designer Chequered Tiles Of Size 300Mm X 300Mm X 25Mm Thick Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigment To Match The Shade / Colour / Matrix Of Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:6) Complete All As Specified And Directed. Etc Complete All As Specified And Directed. , Material And Labour For Double Charged Vitrified Ceramic Tiles Light Shade 9 To 10Mm Thick (Square/Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm, Laid In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed In Cm 1:6 Complete All As Specified And As Directed. , Material And Labour For Double Charge Vitrified Ceramic Tiles, Light Shade, 9 To 10Mm Thick (Square/Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm,, In Skriting Dado Etc., Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Colour Of Tiles, Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed. , Material And Labour Non Skid Coloured Ceramic Tiles 7 To 8Mm Thick, (Square/Rectangular) Area Of Each Tiles Exc 0.06 Sqm But Not Exc 0.11 Sqm As In Floors Set And Jointed In Cement Slurry And Pointed In White Cement Mixed With Colour Pigment To Match Existing Surfaces With 15 Mm Thick Screed Bed In Cement Mortar (1:6) Including Dismantling Of Old Unserviceable Tiles Complete All As Specified And Directed. , Material And Labour For Glazed Light Coloured/Printed Ceramic Tiles 450X300x7mm Thick In Vertical Surfaces Such As Skirting, Dado Etc Set And Jointed In Neat Cement Slurry, Pointed In White Or Coloured Cement To Match Colour Of Tiles, Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed. , Material And Labour For Non Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square / Rectangular) Area Of Each Tiles Exc 0.18 Sqm But Not Exceeding 0.38 Sqm In Floor Etc Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match With Coloured Tiles Over 15Mm Thick Screed Bed In Cement Mortar 1:6 Complete All As Specified And Directed. , Material And Labour For Non Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square / Rectangular )Area Of Each Tiles Exc 0.18 Sqm But Not Exceeding 0.38 Sqm On Vertical Surfaces As Skirting Etc Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match With Coloured Tiles Over 10Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For 100Mm Thick Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate ) As.In Floor Finishing Even And Smooth With Out Using Extra Cement Complete All As Specified And As Directed , Material And Labour For 10Mm Thick Rendering On Other Than Fair Faces Of Brick Wall In Cm 1:6 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement With Using Wpc @3% By The Wt Of Cement. Wpc Shall Be Measured And Paid Seperately. , Supply Only Water Proofing Compound. , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Wall And Applying A Coat Of Alkali Primer And Two Coats Of Acrylic Distemper Complete All As Specified And Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Acrylic Exterior Weather Coat Paint (Weather Proof Paint With Quality Of Dust Guard, Anti Algal And Anti Fungal Paint With Minimum 05 Years Performance Warranty, Make: Berger Weathercoat Anti Dustt Or Equivalent Of Asian Paint Or Nerolac) Over A Coat Of Approved Primer Over 1Mm Thick Water Proof Putty Of Same Manufacturer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Wall Surface And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , Supply And Fix Sheet Glass 4.0 Mm Thick Ordinary Quality And Glazing With Oil Putty/ Wooden Beads/ Aluminium Window In Squares Not Exc. 1.00 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For Preparation Of New Or Previously Untreated Surface Of Wood Or Wood Based Materials Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer All As Specified. , Material And Labour For Preparation Of New Steel And Iron Surfaces Of Any Description, Over 10 Cm In Width Or Girth , Not Otherwise Described And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc Complete All As Specified And As Directed , Supply Hoisting And Fix 500 Ltrs Rotational Moulded Polythene Water Storage Water Tanks Twin Layered Construction ( Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Duly Isi Marked, 20Mm Gi Light Grade Over Flow Pipe Approx Length 1.5M Long, 20Mm Gi Medium Grade Pipe For Wash Out Approx Length 2.00 M Duly Plugged At One End Shall Be Provided Including Dismantling The Existing Tank Complete All As Specified. , Supply Hoisting And Fix 1000 Ltrs Rotational Moulded Polythene Water Storage Water Tanks Twin Layered Construction ( Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Duly Isi Marked, 20Mm Gi Light Grade Over Flow Pipe Approx Length 1.5M Long, 20Mm Gi Medium Grade Pipe For Wash Out Approx Length 2.00 M Duly Plugged At One End Shall Be Provided Including Dismantling The Existing Tank Complete All As Specified.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
2.
Defence #11392755 Technical Bid
Tender for Material And Labour For Plain Cement Concrete 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundation ,Filling And Mass Concrete Complete All As Specified And Directed . , Material And Labour For Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate) As In Cills, Steps; Seismic And Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Upto 60 Cm In Height, Copings, Kneelers, Apex Stones, Bed Plates, Kerbs Not Provided For, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating Etc , Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete 1:3:6 Type C-1 Using (20Mm Graded Stone Aggregate) As In Bed Blocks For Hold Fast,Coping Errection Of Posts Etc Complete All As Specified And Directed. , Material And Labour Reinforced Cement Concrete Nominal Mix (1:1.5:3) Type A1 (Using 20Mm Graded Stone Aggregate) On Slabs Supported On Walls , Beams And Columns In Floors , Roofs,Landings,Balconies, Canopies Deck Slabs, And In Shelves And The Like Complete All As Specified And As Directed. , Material And Labour Reinforced Cement Concrete Nominal Mix (1:1.5:3) Type A1 (Using 20Mm Graded Stone Aggregate) Chajja, Facia Etc And The Like Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete 1:3:6 Type C0 (Using 12.5Mm Graded Stone Aggregate) As In Filling The Hollow Portion Of Steel Frame Complete All As Specified And Directed. , Supply Only Water Proofing Compound. , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cm 1:4 Complete All As Specifed And Directed. , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc To Any Radius In Half Brick Thick Walls Built In Built In Cm 1:4 Complete All As Specifed And Directed , Material And Labour For Form Work On Flat Sides To Soffits Of Suspended Roof Slabs Not Exc 200 Mm Thick (Horizontal Or Sloping), Walls , Beams And Columns In Floors,Landings,Balconies, Canopies Deck Slabs, And In Shelves Rough Finished Surface Of Concrete All As Specified And As Directed. , Material And Labour For Form Work On Flat Sides To Chajja, Fins, Louvers, Fascia Etc Rough Finished Surface Of Concrete All As Specified And As Directed. , Refixing Wooden Or Aluminium Door Shutters Of Any Description Exceeding 1 Sqm But Not Exceeding 2 Sqm Each In The Same Opening After Taking Down, Easing And Adjusting Including Refixing Builders Hardware, Glass Etc As Required And Renewal Of Unserviceable Screws Concrete All As Specified And As Directed. , Supply And Fix For 2Nd Class Hardwood Plain, Solid, Straight Chowkhats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue, Pinned At Joints Complete All As Specified And Directed. , Supply And Fix Factory Made 30 Mm Thick Flush Shutter Solid Core Construction With Block Board Core & Plywood Face Panels Commercial Type On Both Sides Incl 5Mm Thick Teakwood Leaping Alround Complete All As Specified And Directed. , Supply And Fix 2Nd Class Hardwood Factory Made Door, 35 Mm Thick, Glazed And Skeleton Shutters, Open Rebated And Prepated To Receive Glass Gauze Etc (With Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Materials And Revated Sash Bars Any Number , Edges Of Framing Plain Chemfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass In Door Etc Or Provided With Styles And Rails As Specified In Ssr Part 1 Section 8, Clause 8.20 (A) Complete All As Specified And Directed. , Supply And Fix 2Nd Class Hardwood Glazed And Skeleton Window Shutter 30Mm Thick, Divided Into Squares, With Plain, Chamfered Or Rounded, Mitred And Rebated Sash Bars, Any Numbers, To Receive Glass, Gauze, Etc Or Provided With Styles And Rails As Specified In Ssr Part 1 Section 8, Clause 8.20 (B) Complete All As Specified And Directed. , Supply And Fix Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed , Supply And Fix Factory Made Solid Panel Pvc Door Shutter 30Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails, M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc C Channel Heaving A Pvc Sheet Strip Of 20Mm Width Suck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S Frame Wedded/ Sealed To The Stiles, & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Supplying & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed , Supply And Fix Stainless Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Stapple Etc Concrete All As Specified And As Directed. , Supply And Fix 300Mm Long Aluminium Alloy Anodised , Plate Type ,Stove Enameled Black , With Bright Bolt Not Less Than 12Mm Dia With And Incl Minimum Of 6 Bolts And Nuts ,Four On Bolt Plate And Two On Staple Concrete All As Specified And As Directed. , Supply And Fix Stainless Steel Butt Hinges Cold Rolled Meium Weight Of Size 100Mm Etc Complete All As Specified And Directed. , Supply And Fix Stainless Steel Butt Hinges Cold Rolled Meium Weight Of Size 75Mm Etc Complete All As Specified And Directed. , Supply And Fix Aluminium Alloy Handles 150 Mm Long Fabricated Type Complete All As Specified And Directed. , Supply And Fix Aluminium Alloy Handles 100 Mm Long Fabricated Type Complete All As Specified And Directed. , Supply And Fix Aluminium Anodised Barrel Tower Bolts Of Extruded Section 200 Mm Long Complete All As Specified And Directed. , Supply And Fix Aluminium Anodised Barrel Tower Bolts Of Extruded Section 150 Mm Long Complete All As Specified And Directed. , Supply And Fix 300Mm Long Aluminium Alloy Anodised Sliding Door Bolts , With Hasp Staple (Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast-Aluminium Ally Complete All As Specified And Directed. , Supply And Fix Powder Coated Three Track Aluminium Sliding Window With Approved Make Of Following Extruded Section Of Anodised Glazed Shutter As Per Standard Engineering Practices Including All Other Accessories Complete Including 4.00 Mm Thick Tinted Glass Panes, Rubber Beading, Mosquito Proofing, Locking System Etc. Complete All As Specified And As Directed. (Refer Jindal Cat M-2014 ) Aluminium Sections : A Series (I) Shutter Bottom & Top :- 37.50 X 15 X 1.3 Mm Thick (20690) (Ii) Shutter Interlock :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iii) Shutter Side (Handle) :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iv) Frame Bottom :- 75 X 26 X 1 Mm Thick (20671) (V) Frame Top And Sides :- 75 X 26 X 1 Mm Thick (20672) , Supply And Fix Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) Or Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/Neoprene Gasket Required (Fittings Shall Be Paid For Separately) With Extruded Built Up Standard Tubular Material And Labour Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling, C.P. Brass/ Stainless Steel Screws All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge , Material And Labour For Structural Steel Work With Rolled Mild Steel Sections As In Main And Cross Beams, Hip And Jack Rafters, Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Conforming To Fe-290 (Gde E-165) Quality A Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 125Mmx60mmx1.25Mm With Double Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc.Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 105Mmx60mmx1.25Mm With Single Rebate Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc.,Complete All As Specified And Directed. , Material And Labour For Mild Steel Conforming To Fe 410-0 Or Fe 310-0 In Framed Work Such As Grills, Gratings, Etc With Ends Of Bars Shouldered And/Or Riveted Or Forged Into Spikes; Framed Guard Bars; Ladders; Railings And Similar Work Complete All As Specified And Directed. , Supply And Fix Box Type Steel Windows With Side Hung Shutters Both Mosquito Proof And Glazed Shutter Including Projecting Type Hinges With Steel Handle And Steel Peg Stay With Glazing Bars And 12 Mm Square Bar Or Ground Bar Of Approved Design Welded To Steel Window Frame Dovetailed Or Welded Complete All As Specified And As Directed. , Supply And Fix Steel Ventilators With Top Hung Shutter Including Hinges, Steel Peg Stay, Complete All As Specified And As Directed. , Material And Labour For Mild Steel Tmt Bars 10 Mm Dia And Over Cut To Length, Bent To Shape As Required Including Cranking, Bending And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia As In Reinforcement Bar Complete All As Specified And As Directed. , Repairing Of Existing Mild Steel Rolling Shutter Of Any Description Or Any Size Including Replacement Of Damaged Mild Steel Laths, Repairing/ Replacement Of Side Guide Channels, Pipe Shaft, Springs, Ball Bearings, Locking Arrangements, Welding Work, Alingment And Smooth Operation, Including Necessary Nuts, Bolts, Oiling And Greasing, Complete All As Specified And As Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Atmospheric Classification Category 3,Four (4) Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified And As Directed , Material And Labour For Pre- Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Plain Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Pattern Corresponding To Is 15965 : 2012 Of Durability Class 3, Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Having Yield Strength Of 550 Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified Complete All As Specified And As Directed. Note: To Be Executed For Provision Of Ridges And Hips. , Material And Labour For 12 Mm Thick Prelaminated Particle Board Bwp Type Melamine Finished (Both Side) For Fixing The Panel Of The Partition/Door Including Necessary Fittings, Gusket, Angle Cleats, Screw Etc Complete All As Specified And Directed. , Supply And Fix Suspended False Ceiling Using E-Grid 2430, 180 Gsm (Exposed Ceiling Suspension System ) Of Grid Size 600Mmx600 Mm With Main Runner 32 Mm X 24 Mm And Wall Angle 24Mm X 24Mm Using 4Mm Thick High Pressure Stean Crude Everest Non Asbestos Fiber Cement Plain Board (E-Board Classic) In & Including A Grid Of Gi System Duly Suspended With 4Mm Dia Gi Wire Hanger Fixed With Steel Dash Fasteners Or Iron Purlin From The Roof With Adjustment Clip Providing Positions For Light Fixtures,Air Conditioning Diffuser And Ducts ,Sprinkler ,Smoke Detectors Etc.The Main Runners To Be Secured To Structural Soffits By Hanger @ 1220 Mm Maximum C/C. The Last Hanger At The End Of Each Main Runner Should Not Be Placed At More Than 450Mm From The Adjucent Wall,Flush Fitting 1220 Mm Cross Tee To Be Interlocked Between Main Runners @ 610Mm C/C,So As To Form 600Mm X 600 Mm Grid Complete All As Specified And Directed. , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:4) Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm Thick, In Floor, Shelves Etc, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Shade Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:4 Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 7 To 8Mm Thick Area Of Each Tile Exceeding 0.18 And N.Exc 0.38 Sqm In Floor, Shelves Etc, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Shade Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:4 Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Exc 0.18 And N.Exc 0.38 Sqm , In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Including 10Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. , Material And Labour For Coloured/ Printed Glazed Ceramic Tiles 7Mm Thick Not Exc 0.15 Sqm In Area In Vertical Surfaces I.E. Dado, Skirting, Etc., Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match The Tiles, Laid Over And Including Screed Or Screed Bed 10Mm Thick In Cement Mortar 1:4, Complete All As Specified And As Directed. , Material And Labour For 75Mm Thick Cement Concrete 1:3:6 Type C-2 (Using 40Mm Graded Stone Aggregate ) As In Plinth Protection Complete All As Specified And Directed. , Material And Labour For 100Mm Thick Cement Concrete 1:2:4 Type B-2 (Using 40Mm Graded Stone Aggregate) As In Flooring, Hardstanding Complete All As Specified And Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For 10Mm Thick Rendering On Other Than Fair Faces Of Brick Wall In Cm 1:6 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement With Using Wpc @3% By The Wt Of Cement. Wpc Shall Be Measured And Paid Seperately. , Material And Labour For 5Mm Thick Rendering On Fair Faces Of Brick Or Concrete Surface In Cm 1:3 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surface Of Wall And Applying A Coat Of Alkali Primer And Two Coats Of Acrylic Distemper Complete All As Specified And Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Acrylic Exterior Weather Coat Paint (Weather Proof Paint With Quality Of Dust Guard, Anti Algal And Anti Fungal Paint With Minimum 05 Years Performance Warranty, Over A Coat Of Approved Primer Over 1Mm Thick Water Proof Putty Of Same Manufacturer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Wall Surface And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Ceiling Surface And Applying Three Coats Of White Wash Complete All As Specified And Directed. , Material And Labour For 4Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square N-Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For 4Mm Thick Sheet Glass Figured Glass, Pin Head Type And Glazing With Oil Putty In Square N-Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For Preparation And Applying Two Coats Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Over A Coat Of Pink Primer Complete All As Specified And Directed. , Material And Labour For Preparation Of Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide On New Steel Surfaces , Over 10 Cm In Width Or Grith Not Other Wise Described Complete All As Specified And Directed. , Supply And Fix Steel Water Tubes, Medium Grade, Isi Marked, Galvanised, 15Mm Bore With All Fittings, Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , Supply And Fix Steel Water Tubes, Medium Grade, Isi Marked, Galvanised, 20 Mm Bore With All Fittings, Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , Supply And Fix In Repair Vitreous China Wash Hand Basin White, Flat Back Of Size 550Mmx400mm Fixed On And Including Cast Iron Cantilever Bracket, 32Mm Dia Pvc Waste Coupling And 32 Mm Dia Pvc Waste Pipe Including Fixing Of Tap, Waste Fitting Etc Complete All As Specified And Directed. , Supply And Fix In Repair Bib Taps With Wall Flange 15Mm Bore, Fancy Type, Quarter/Half Turn, Brass Chromium Plated, Long Body With Capstan Head And Cup Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Including Accessories Complete All As Specified And Directed. , Supply And Fix In Repair 125 Mm Dia, Chromium Plated Swivel Type Shower Rose With 195 Mm Long Chromium Plated Shower Arm And Wall Flange Suitable For Fixing 15Mm Bore Iron Pipe All As Specified And Directed , Supply And Fix In Repair Bath Wall Mixer With 15Mm Bore (Dia) Spout, Chromium Plated With Long Bend Pipe For Over Head Shower Including Flanges Complete All As Specified And As Directed. , Supply And Fix In Repair Pillar Taps, Cast Copper Alloy, With Capstan Heads, Fancy Type, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered ‘Hot Or ‘Cold With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe 15 Mm Bore Complete All As Specified And Directed. , Supply And Fix In Repair Cp Stop Valve/Angle Valve 15 Mm Bore, Fancy Type Cromimum Plated With Long Shank And Cup (Concealed Type), High Pressure Crutch Or Butter Fly Handle Screwed Both Ends Screwed For Iron Pipe Or For Unions Complete All As Specified And Directed. , Supply And Fix In Repair Rotational Moulded,Multilayer Hdpe Water Storage Tank Of 1000 Ltrs Capacity(Cylindrical Vertical With Closed Top) Isi Marked Fixed In Position On Existing Places With Fittings And Refixing Of Inlet, Outlet & Overflow Pipe Etc, Complete All As Specified And As Directed. , Supply And Fix In Repair Rotational Moulded,Multilayer Hdpe Water Storage Tank Of 500 Ltrs Capacity(Cylindrical Vertical With Closed Top) Isi Marked Fixed In Position On Existing Places Complete And Refixing Of Inlet, Outlet & Overflow Pipe Etc, Complete All As Specified And As Directed. , Supply And Fix Ball Valves 20Mm Bore Dia Of Pipe High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed (Minimum Weight 20Mm-210Gms). , Supply And Fix In Repair 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers , Supply And Fix In Repair Pvc Valve, Symphonic Action Type, Flushing Cistern 10 Liters Capacity Low Level White With Inlet ,Ball Valve ,Float And Handle Including Brocket Complete All As Specified And As Directed. , Supply And Fix 110Mm Dia Pvc (Swr) Pipes, Presure Rate Having 6 Kgf Single Socketed In Any Length With Rubber Ring Joints And Laid In Trenches As In Waste/Soil Pipe Complete All As Specified And As Directed. , Supply And Fix 110Mm Dia Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Walls Complete All As Specified And As Directed. , Supply And Fix 75Mm Dia Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Walls Or Floor Complete All As Specified And As Directed. , Supply And Fix Pvc (Swr) Bends With Access Door Any Radius, 75 Mm Bore Complete. , Supply And Fix Pvc (Swr) Bends With Access Door Any Radius, 110 Mm Bore Complete. , Supply And Fix, In Repair Vitreous China Wash Down Water Closet Of Orissa Pattern Size 580 X 440 Mm White With Integral Foot Rests Including Removing Filled Lean Concrete From Sunken Portion And Putting Of Lean Concrete After Treatment Of Sunken Slab, Connection To Trap And To Flushing Pipe Etc Complete And Making Good To Floor Complete All As Specified And Directed. , Supply And Fix In Repair Vitreous China Wash Down Water Closed Pan (Pedestal Pattern) With P Or S Trap White, Including Connection To Trap And Cistern, Flush Pipe Including White Plastic Water Closet Seat Cover, Closed Pattern With Flat Bottom & Cover And Aluminium Anodised Hinging Device And Making Good Disturbed Surface Of Floor Complete All As Specified And Directed. , Supply And Fix In Repair Plastic Water Closet Seat Cover, White, Closed Pattern With Flat Bottom & Cover And Aluminium Anodised Hinging Device And Fixed Wc Pan Complete All As Specified And Directed. , Dismantling Plain Or Corrugated Steel Sheeting Any Gauge Thickness Including Nanital Or Similar Pattern Roof Covering , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Down Door Chowkhat With Shutter Area N-Exc 1.5 Sqm Each(Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Taking Down Chowkhats Or Frames With Shutters Exc 1.5 Sqm But Not Exc 4 Sqm Each (Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Taking Down Shutters Of Wooden Or Aluminium Door Of Any Description N. Exc 1 Sqm Each Complete All As Specified And Directed. , Taking Down Shutters Of Wooden Or Aluminium Door Any Description Area Exc 1 Sqm And N Exc 2 Sqm Each Complete All As Specified And Directed. , Dismantling Wall And Ceiling Boards Or Insulation Boards, Any Thickness, Any Description, Including Cover Fillets Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete (Reinforcement Cut As Required To Facilitate Demolition) Of Any Description And In Any Position Not Otherwise Specifically Provided For Complete All As Specified And As Directed. , Taking Down Cement Plaster Of Any Description On Brick Or Stone Walls Etc Including Racking Out Joints Hacking For Key Scrubbing Down With Water Etc Complete All As Specified And Directed. , Demolition Of Brick Work Built In Cement Mortar Or Cement Lime Mortar , Dismantling Structural Steel Work Including Doors, Gates But Excluding Framed Trusses Etc Complete All As Specified. , Demolition Of Stone Slabs And Tiles Laid Dry And Dry Or Pointed Of Any Description Or Thickness Infloors, Aprons Etc. , Dismantling, Floor Hearth Or Wall Tiling Inclduing Cement Mortar Bedding And Removing Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc. 15 Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed. , Demolition And Breaking Up Drain Waste Pipes (Sgsw, Ac Or Rcc, Ci ) Of Internal Dia 75/110 Mm, Set In Cement Mortar In Any Position Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
3.
Defence #11392754 Technical Bid
Tender for Demolition Of Brick Work /Stone Masonry/Pcc Block Masonry Built In Cement Mortar Of Any Description Complete All As Specified And As Directed , Taking Down Cement Plaster Of Any Description Hacking For Key Or Raking Out Joint On Old Brick Work/ Stone /Concrete Surface Etc Complete All As Specified And As Directed , Demolition Of Reinforced Cement Concrete (Reinforcement Cut As Required To Facilitate Demolition) Of Any Description & In Any Position Not Specifically Provided For Complete All As Specified And As Directed , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Etc Complete All As Specified And As Directed , Dismantling Of Fencing Posts Or Struts (Wood, Steel Rcc) Any Section, Posts Embeded In Natural Ground Etc, Including Taking Out Embeded Portion And Making Good Distrubed Ground Complete All As Specified And As Directed , Dismantling Of Fencing Wire Mesh, Any Type Etc Complete All As Specified And As Directed , Demolition Of Stone Slab And Tiles Incl Backing Coat Of Any Description Or Thickness In Floors, Aprons Etc (Laid Dry Or Laid Dry And Pointed) Etc Complete All As Specified And As Directed , Demolition Of Cement Concrete And Paving Not Exc 15 Cm Thick (Below Or Above Ground Level) Complete All As Specified And As Directed. , Excavating In Post Holes (Or Similar Holes) Each Not Exceeding 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50M And Making Good Surfaces In Soft/Loose Soil Complete All As Specified And As Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Soft / Loose Etc Complete All As Specified And As Directed , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm. Etc Complete All As Specified And As Directed , Removing Excavated Material Exc. 250 M But N Exc. 500 M And Depositing Where Directed Et Complete All As Specified And As Directed , Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Under Bedding For Interlocking Tiles Etc Complete All As Specified And As Directed , Material And Labour For Reinforced Cement Concrete (Nominal Mix) Type (1:2:4) B-1 (With Using 20 Mm Graded Stone Aggregates ) As Columns, Pillars, Piers, Posts, Ftg, Etc Struts Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete 1:4:8 Type D-2(With Using 40 Mm Graded Stone Aggregates) As In Foundations And Mass Concrete Etc Complete All As Specified And As Directed , Material And Labour For Providing Cement Concrete1:2:4 Type B 0 (12.50Mm Graded Stone Aggregate) In Copings, Leveling Concrete, Kerbs, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating Complete All As Specified And As Directed , Material And Labour For Providing 25Mm Thick Precast Cement Concrete Louvres Type B-0 , 1:2:4 (With Using 12.5 Mm Graded Stone Aggregaes) Set In Cm 1:6 As And Jallies, 25Mm Thick (Measured Solid), Including All Mouldings But Excluding Frame (Pre -Cast Frame Shall Be Measured Separately And Paid For Under Item) Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete 1:2:4 Type C-1, (With Using 20 Mm Grades Stone Aggregates) As In Walls Or Retaining Walls, Any Thickness, Size Or Shape Including Pilasters, Buttresses Columns, Pillars, Boundary Pillars And Posts (Including Caps And Base) Incl Form Work Etc Complete All As Specified And As Directed , Material And Labour Brickwork (Old Size Brick) With Sub Class ‘B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar 1:4 Etc Complete All As Specified And As Directed , All As Per Item No 20 Above, But Except Brick, , Material And Labour Brickwork (Old Size Brick)With Sub Class ‘B Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls Built In Cm 1:4 Etc Complete All As Specified And As Directed , All As Per Item No 21 Above, But Except Brick, , Material And Labour For Mirror Polishing 16-18 Mm Thick Granite (Of Any Type) With High Gloss Finish Machine Cut, In Floor Etc Laid Over Cement Screed And Jointed With Grey Cement Slurry And Pointing With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Grinding & Necessary Polishing & Over 15 Mm Thick Screed With 1:6 Cm Complete All As Specified And Directed. , Material And Labour For Formwork With Square / Rectangular Pillars, Posts, Struts, Piers, Columns And, Ftg Etc, Stanchions With Rough Finished Surface Of Concrete Etc Complete All As Specified And As Directed , Material And Labour Tmt Bar 10Mm Dia And Over Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hoping For Columns Hooking Ends And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete. , All As Per Item No 25 Above But 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders Etc Complete All As Specified And As Directed , Supply And Fix Framed Work Such As Grills, Gratings, Guard Bars Etc With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railing; Framework Of Water Tanks And Similar Work Conforming To Fe-290 Gde-E-165 Incl Dismantling Of Existing Mild Steel Work Work Etc Complete All As Specified And Directed. , Supply And Fix Posts And Struts As In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Etc Complete All As Specified And As Directed , Supply Only Galvanised Chain Link Fencing Of Mesh Size (75Mmx75mmx3.15Mm) Etc Complete All As Specified And As Dicected , Fixing Only Galvanised Chain Link Fencing Of Mesh Size (75Mmx75mmx3.15Mm)) Size And Any Type Of Standards, Rails, Straining Bolts, Etc. Including Provission Of Binding Wire Etc Complete All As Specified And As Directed , Supply And Fix Pvc Coated Chain Link Fencing, Size Of Mesh 75 Mmx 75 Mm Made Out Of 3.15Mm Dia Gi Wire (Conforming To Relevant Is) Excluding Thickness Of Pvc Coated , Colour As Approved, Fixed To Any Type Of Fencing Pots, Standard Rails, Straining Bolts Etc Complete All As Specified And Directed . , Supply And Fix Mild Steel Screw Bolts (Machine Made) With Hexagonal Or Spuare Heads At One End And Screwed The Other Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Not N.Exc 5 Cm Long And Diameter Of Shank 5 To 10 Mm Complete All As Directed , Material And Labour For Mild Steel Round Bars Fe 410W (Gde.E-250) Quality-A, 10Mm Dia And Over, Cut To Length, Bent To Shap Required Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Les Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed. , Supply And Fix In Repair Galvanised, 2 Strand, Steel Barbed Wire 2.24 Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacings And Straining And Fixing To Any Type Of Standard Rails Straining Bolts, Including, Securing Or Tying At Crossings With And Orovising Of Galvanised Mild Steel Wire, Staples Or Steel Pins, Etc. Complete All As Directed. (Each Line Wire Measured) , Supply And Fix In Repair Razor Blade Galvanised Concertina Coil Of 600Mm Diametre Made Out Of 2.59Mm Thick Galvanised Wire Having Weight Of Each Coil @ 15.2Kg+/-5%, Stretched To A Length Of 10 To 12 M To Achieve 950Mm Dia As In Fencing To Steel Posts And To Another Coil/Ms Ribs Including Fixing With Special Galvanised Fastners Such As J Clips, U Clips C Clips Etc, Fixed In Position Complete All As Specified And As Directed. Note: Linear Measurement(Per Rm Of Concertina Coil Of 600Mm Dia) Shall Be Measured And Paid. , Restraining And Resecuring Existing Barbed Wire Of Any Description Including Making Good Stapples Etc Complete All As Specified And Directed , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 60 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 80 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Supply And Fix Exterior Grade, Coloured Glossy Finish Rubber Pressed, Cement Concrete Designer Chequered Tiles Of Size 30Cm X 30Cm X 25Mm Thick Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigment To Match The Shade / Colour / Matrix Of Tiles Over 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Etc Complete All As Specified And As Directed , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Etc Complete All As Specified And As Directed , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And As Directed , Material And Labour For 75 Mm Thick Cement Concrete Type D- 2, 1:4:8 (40Mm Graded Stone Aggregate) As In Sub Base Of Flooing Etc Complete All As Specified And As Directed , Material And Labour For 100Mm Thick Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate )As.In Floor Finishing Even And Smooth With Out Using Extra Cement Complete All As Specified And As Directed , Material And Labour For Rubber Moulded Factory Made Pre-Cast Kerb Stones Of Cement Concrete Type B-1 1:2:4 (With Using 20Mm Graded Stone Aggregates) Fixed In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Et Complete All As Specifed And As Directed. , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And As Directed. , Material And Labour For Comple Removal Of Existing Treatment Of Old Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Primeretc Complete All As Specified And As Directed , Material And Labour For Preparation New Of Previously Un Treated Steel And Iron Surface Of Any Description, Over 10 Cm In Width Or Girth , Not Otherwise Described And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc Complete All As Specified And As Directed , Material And Labour For Preparing New Concrete Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Primer Etc Complete All As Specified And As Directed , Material And Labour For Preparing Old Concrete Surface And Applying One Coat Of Synthetic Enamel Paint Etc Complete All As Specified And As Directed
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
4.
Defence #11213485 AOC
Tender For Additional / Alternator To P-266 Of 5 Afdc And Provision Of Misc E/M And B/R Services In Various Buildings And Certain Minor Works At Afs Pune Under Ge Af Lohegaon.; 1 Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering all as specified and directed. 2 Dismantling timber in fillets rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work 3 S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. 4 S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Eaves boards, fixed with self tapping screws as specified 5 S & F Rolled Mild Steelroof trusses(framed),trussed ,purlins ,rails and fastenings etc.,confirming to Fe 410 - S including distance pieces, cleats, etc., complete. 6 S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering.doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening andfixing complete (Eaves board fixing ) 7 S & F 6mm thick asbestos cement plain building boards fixed to steel frameowrk with screws all as specified and directed ( For Eaves Board). 8 S &F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-w (Gde E-250 quality A) all as specified and directed. 9 M & L for Preparation of newsteel/iron surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paintover red oxide primer for material and labour complete all as specified. 10 M & LPCC B1 1:2:4 (12.5mm graded aggregate) for in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. (Note :- Bed boxes and Coping on wall to fill up the gap) 11 Demolition of Brickwork or stone/boulder masonry/PCC bloack masanory,built in cement motar all as specified and directed. 12 S & F brick work with fly ash bricks,straight or cuved on plan exc 6m mean radius built in CM 1:4all as specified and directed. (Note : 1. For filling the Gap between sheet and wall 2. Clsoing of ventilaots ) 13 Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge 14 Material and labour for suspended false ceiling usinganodized aluminum snap grid frame work.Including Hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete. Perforated particle board/tiles for insulation and acoustic purposes, 60 x 60 cm size, fixed on snap grid 12mm thick confirming to IS 2095, 2995 Part I fixed with 25mm dry wall screws @ 230 mm C/C with screw driver to match surface attachment. Finally board have to be joined and finished to have a flush look using jointing compound/tape as per manufacturer instruction. With Designing as per direction in two steps complete all as specified and directed by Engineer in Charge. 15 M & L rendering 20mm thick on surface of stone masonary surface in CM 1:4and is to be finished even and smooth with out using extra cement complete all asspecified directed 16 M & L rendering 20mm thick on surface of stone masonary surface in CM 1:6and is to be finished even and smooth with out using extra cement complete all asspecified directed 17 M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than than 50gm/litre and UV resistance as per IS 15489:2004 Alkali and fungal resistance, dirt resistance exterior paint or required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.9 litre/10 sqm over new surfaces/old surfaces of wall all as specified and directed. 18 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cmdeep and getting out hard dense soil 19 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting poin 20 Hard coare of broken stone aggregate, of gauge n.exc 60 mm 21 M&L for cement concrete Type D -2 1:4:8 (40 mm graded agg) in foundation fillig/path and mass concrete 22 Formwork to sides of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter 23 M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade A in plinth protection 24 Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) 25 S &F 605 x 605 mm Anodised aluminium snap grid frame work for false ceiling all as specified 26 Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners12.5mm dia. 40mm long complete all as specified 27 Dismantling boarding, any description, fixed in any position with nail 28 Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete 29 M&L rendering 15mm thick on surface of concrete surface in CM 1:6and is to be finished even and smooth with out using extra cement complete all asspecified directed 30 Demolition of stone / block masonry built in CM 1:4 31 M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) and set in CM (1:6). 32 Preparing new wall surface, providing and applyingplaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil emulsion 33 Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners withholdfasts and brackets, complete 34 S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 35 S&F Sheet glass 5.5 mm thick ordinary quality and glazing fixedin aluminium doors squareexc 0.5 sq. m in each pane 36 S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers 37 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, 38 S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats 39 Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) 40 M & L for 100mm thick PCC type B-2 (1:2:4) using 40mm graded aggbnas in flooring finshed even and smooth w/o using extra cement. 41 M & L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded agg finished even and smooth w/o using extr cement. 42 M & L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectamgular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors (Superior/ Premium quality), set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15mm thick screed bed in CM (1:6) complete all specified and directed. 43 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer in Charge. 44 M & L fire resistant paint on steel surface over a coat of primer complete alll as specified (Note: The primer is of same material of 1:1 dilution application) 45 S & F of mineral fibre reinforced false ceiling tiles (all height)of size 595X595 mm of approved texture, design and pattern. The tiles should have humidity risistance RH of 99%, Light resistance greater than 85% , thermal conductivity K=0.052-0.057 W/mK, Fire performnce As per (BS476 Pt-6&7) in true horizontallevel suspended on interlocking T-grid of hot dipped all around ganvanisedIron Section of 0.33mm thick (galvanised @ 120GSM)bcomprising of main T runner of 15 X32 mm of length 3000mm, cross T of size 15X32 mm of length 600mm to form grid module of size 600X600 mm suspended from ceiling using galvanised Mild steel item ( galvanised @ 80GSM) 50mm long 8mm outer dia M-6 Dash Fastner, 6mm diameter fully threaded hanger rod upto 1000mm length and L-shped level adjuster of size 85X25X2mm, spaced at 1200 mm center to center along main T, the system should rest on perpfery walls/ partition with the help of GI perimeter wall angle of size 24X24X300mm made of 0.40mm thick sheet, to be fixed to the wall with the help of the plastic rawl plug at 450mm center to center & 40mm long drywall S.S screws. The exposed bottom portion of all y- Sectionused in false ceiling support system shall be prepainted with polyster baked paints, for sll heigth. the work shall be carried outas per specification drawing adn as per the direction of the Engr-in-charge with 16mm thick Bevelled traingular Mineral Fibre faalse ceiling (NRC 0.5 to 0.6)) 46 Taking down and of chowkats or frames exc 1.5 sqm n exc 4 sqm each 47 S & F Anodised aluminium frame powder coated to (minimun thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 48 S & F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips,ruber neoprene packing, handk=les 2 Nos in each door, hinges, anodises aluminium snap beading screws etc. complete all as specified. 49 Cuting holes exc 150 sqcm but not exc 400 Sqcm into or through brick walls built in cement mortar of any description and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I as required 50 m&L two coats or Oil Bound distemper on Cement concrete surface over a coat of primer as per the shed directed by the engineer-ncharge, complete all as specified. 51 M&L for treating small articles such as ends of posts, holdfasts etc with tar or coal tar black paint; area exc 0.1 Sqm but n exc 0.5 Sqm each 52 S&F sheet in repairs glass 4.8 mm thick exc 0.5 sqm area ordinary quality and glazing with oil putty/rubber gasket fittings all as specified and directed. 53 M & L in repairs for 12mm Prelaminated particle board, interior grade, prilaminated both side with decorative choice lamination fixed with screws to timber/Aluminium frame work complete all as specified and directed. 54 S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) 1000 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I 55 S & F in repairs 20 mmBrass valves ,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed 56 S&Fbib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap). 57 S&F GI tubingof 15 mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors completeall as specified and as directed by the Engr-in-C. 58 S&F GI tubingof 20mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors completeall as specified and as directed by the Engr-in-C. 59 S&F GI tubingof 25mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors completeall as specified and as directed by the Engr-in-C. 60 S&F25 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe 61 S&F20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe 62 Dismantling wrought iron or mild steel work of any description not otherwise provided for. 63 S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 graded St 240 all as specified and directed.(Eaves Baords) 64 M&L for Providing precast cement concrete (20mm graded stone aggregate) 1:3:6 type C-1 as in solid building blocks 10cm thick setting in cement mortar,1:4 complete, in walls all as specified. 65 Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed 66 M&L TMT bars 10 mm and over cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified 67 M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) fair finished surfaces of concrete flat all as specified 68 M&L for reinforced cement concrete M 20 using 20mm crushed stone aggregate as in roof slabs supported on walls surfaces of concrete flat all as specified. 69 M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 and rendering is to be finish even and smooth with out using extra cement. 70 M&L for preperation of new concrete /plastered surface of any description, two coat of plastic emulsion paint over a coat of primer complete all as specified and as directed complete all as specified and as directed. 71 M&L for Powder Coated (Minimum thickness of powdercoating 50 micron)Anodised aluminium frame of standerd section for doors, windows, ventilators and partitions withdoublerebates including joining cleat for fixing etc. complete all as specified 72 S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (For sliding window ) 73 M&L sheet glass 4.0mm thick figured glass, pin head type and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed 74 M&L for vetrified ceramic tiles 10mm thick full body(Dark shade/Ultra Charged/Double charged ) (square/rectangular) polished, area of each tilesexc 1.00 sqm in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. 75 M&L for vetrified ceramic tiles 10mm thick full body(lightshade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. 76 S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediatechannel at 457 mm centre to centre and including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified 77 S&F for 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish(Frame work for ceiling shall be measured and paid separately) 78 Removal of existing Rifle racks including all fixing stell bolts and cement work all as specified work 79 M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:4 all as Specified 80 M&L for Providing precast cement concrete (20mm graded stone aggregate) 1:3:6 type C-1 as in solid building blocks 10cm thick setting in cement mortar,1:4 complete, in walls all as specified. 81 M & L for 25mm thick PCC 1:2:4,type B-0, (using 12.50 mm graded stone aggregate) as in under layer of tile flooring & finishing the surfacesrough to receive screed bed complete as specified and directed. 82 M&L for machine cut mirror polish kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. 83 M&L for machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. 84 Fixing and grouting of new steel Rifle racks on the floor including necessary fixing bolts and necessary arrangements of grouting and grouting material all as specified. 85 M&L Hand rails, grills ,Gates ,half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof ,Brackets for Valley gutters ,including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 86 S&F for Mild steel ,plain black sheet of minimum 0.8mm thickness for Hoods cover for Rolling shutters;cladding to door shutters/Hangar doors ; water tank platforms etc with plain 40mm lap joints or welded/riveted seams including ,bending, turning up, mitred angles , stopped ends,outlets,etc. as required all as sprcified and directed by Engr-in Charge. 87 M&L for Cutting holes in brick/stone walls in mud/cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4Type B-1 as required all as specified and directed by Engineer-in-Charge. 88 Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light pointcomplete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. including sorting out serviceable and unserviceable light fitting and keep serviceable fitting in safe guard for reuse as required on site. 89 Taking down the sub main wiring of any dia / sq mmon teak wood batten /PVC conduit GI earth wire all as directed. 90 Taking down cearfully byunscrewingthe unserviceable DB Boxes, MCB distribution boards SP & TPN with porcelain cutouts etc all as directed. 91 Material and labour for providing point wiring with two runs of 1.5 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and capingwith all fittings/fixture etc andsurface typePVC box, cover plate all as specified and directed by Engr-In-Charge.(a) Onelight point controlled by one switch. 92 (b) One 3 pin socket 5 A on independent board. 93 (c) One 3 pin socket 5 A on same board. 94 Material and labour for providing point wiring with two runs of 2.5 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVCinsulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping,with all fittings/fixture etc andsurface typeModular , PVC box cover plate, frame all as specified and ndirected by Engr-In-Charge. 95 S & F Sub Main Wiringwith FRLS PVC Insulatedmultistranded copper conductorwires ofsize2x6.0 sq. mm + 1x6.0 sq. mm earth wire in casing caping complete as directed.Note : for Item No 95 One run of phase wire one run of Neutral wire and one run of Earth wireand one run of casing and capping shall be meassured and as one length. 96 S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps.including fixing concealed in wall and making good the disturbed surfacecomplete all as directed 97 Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 98 Supply and fixEnergy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 5700/6500K colour temperature with current electronic connections as directed 99 S&F MCB SP 240 volt 6 to 32 A C series complete 100 S &F for MCB SPN 40-63 Amps C curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge. 101 Supply and fix Modular switch 1 way 6A, 1 module 102 Supply and fixmodular Socket, 6A - 2/3 pin combined 2 moduler 103 Supply and fixModular switch 1 way 16A, 1 module 104 Supply and fixmodolar Socket 6A/16A - 2/3 pin combined2 module, 105 Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm 106 S & F Modular white cover plate with frame 2 Module 107 S & F Modular white cover plate with frame 3 Module 108 S & F Modular white cover plate with frame4 Module 109 S & F Modular white cover plate with frame 6 Module 110 S & F Modular white cover plate with frame 8 Module 111 Supply, Fixing , Testing and Commissioning of Single phase isolation transformer to be installed at input power supply of L-2 switch,via 16 Amps MCB and with power earthing point specification as follows 1Ph, Capacity 1KVA, Input 230V AC ±10%,Output 230V±10%,50 Hz,cooper wire,work efficiency more than 95%,potential between earth to neutral less than 1 Volt with all standard fitting as per direction of Engineer in charge 112 Supply, Fixing , Testing and Commissioning ofIsolation transformer of capacity 5 KVA, single phase ,50 Hz , Copper wound , Air cooled , class of insulation A ,metallic body duly powder coated designed for input Voltage range 240+-5% and output voltage range 240+-5% ,Ratio 1:1 , indoor , efficiency more than 95 % , Potential difference between neutral to earth less than one volt with all standard fittingsas per direction of Engineer in charge 113 Supply, Fixing , Testing and Commissioningof Three Phase Surge Protector Device to be installed at input power supply of L-2 switch all as specified and directed by Engr-In-Charge 114 S&F wall mounted Industrial grade metal enclosure box made from 3mm thick CRCA sheet consist of following Items:-(a) Panel mounting Industrial grade socket/plug outlet 16 A,IP44(b) SPD ,1.5kv,320A,20kA - 1 Nos(c ) MCB SP 16 A- 1 Nos 115 S&F Vertical double door Distribution board TPN 4 way 125 A rated busbarconsisting ofMCCB. 63 A 18KA - 1 Noincluding fixing on wallsurface and making good the disturbed surfacemaking all nacessary incomming and out going connections using proper size copper thimblescompleteall as required on site all as directed 116 Supply and fixing in replacement sheet metal enclosure with DBs ( grouted in walls) double door type for MCBs 12 ways with 200 Amps 240 volts rated bus bar incl taking down old DB all as specified. 117 Material and labour for taking down serviceable Fire Alarm panel from one location and re-install the same at same /another location including fixing brackets/nut bolts incl testing and commessioning of the same all as specified and directed 118 Material and labour for taking down serviceable Smoke / Heat / Fire detector from one location and re-install the same at same /another location including necessery cable upto Fire alarm panelincl testing and commessioning of the same all as specified and directed 119 Supply and fix adressable smoke Detectors Complying with and type certified to EN-45 type multisensor detector with heat and smoke combination Photoelectric / Optical with base with self built intelligence as per IS: 11360 all as specified. 120 Supply, install, testing and comissioning of adessable break glass manual call pointincluding sunken boxes, with built in monitor module will all acessories and signal indicator complete as per tech specification and shall be UL listed complete. 121 Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,4 core, 1100 Volts grade. 122 Material and labour for taking down serviceable split AC of capaicty upto 2.0 TR from one location and re-install the same at same /another another location including fixing brackets, gas charging, brazing and additional required copper piping incl testing and commessioning of the same all as specified and directed 123 Supply, Install testing and commessioning Single pole and neutral enclosure 240 Volts with a two pin and earth plug and socket complete with one single pole MCB 20 Amp all as specified and directed 124 Material and labour for providing point wiring with two runs of 4 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVCinsulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping,ISI Marked complet for housing one 15 to 20 A Switch / socketscomplete 125 Supply, Install , Testing and Commissioning of wall mounted enclosure box made from 3mm thick CRCA sheet enclosure consist of following items for 3 Phase 2 AC timer & Controller of Auto switching timer unit suitable for operate 8.75 TR package type AC:-(a) Timer - 1 No(b) Contactor 32 amps - 2 No(c ) Indication lamp - 1 No
Contract Date: Jan 09, 2026 Contract Value : 44.46 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Maharashtra View Result →
5.
Defence #11198549 AOC
Tender For Spl Repair To Certain Md Accn In Kandhar Line Under Ge Central Delhi Cantt-10; 1 Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubbing down with water etc including remove alldebris at 2 KM away from site complete all as specified and directed. 2 M&L for 15 mm thick rendering in cement mortaron fair faces of brick work or concrete surfaces, applied in two layers i.e. 1st layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd (top) layer of 5 mm thick rendering in cement mortar (1:4 )mixed with WPCfinished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately) 3 M&L for rendering 10 mm thickin CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. 4 M&L for rendering 5 mm thick in CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified and directed. 5 M&L for preparation of new plaster surfaces of wall and applying water proof wall putty 1-2 mm thickness over plastered surfaces to prepare the surfaces even and smooth and finishing walls with Two coats @ 1.67 ltr/10 Sqm each acrylic smooth exterior paint of required shadeover and including priming coat of exterior primer @ 2.20 Kg/10Sqm complete all as specified and directed. 6 M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper complete all as specified and directed. 7 M&L for Preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper complete all as specified and directed. 8 M&L for complete removal of existing treatment of old decorated plastered or unplastered surfaces of wall by rubbing , brooming down, washing with water etc and applying two coats of oil bond distemper complete all a specified and directed. 9 M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing tretament, by rubbing brooming down, washing with water etc and providing and applying 1-2 mm thickness wall putty over plastered surfaces to prepare the surface even and smooth and finishing wall surfaces by applying Two coats @ 1.67 ltr/10 Sqm each with acrylic smooth exterior paint of required shade over and including priming coat of exterior primer @ 2.20 Kg /10Sqm complete all as specified and directed. 10 M&L for dismantling water tanks of capacity exc 250 litres & n. exc 500 litres complete all as specified and directed. 11 M&L for rotational moulded polyethylene water storage tanks (ISI Marked) white colour 500 litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball complete all as specified and directed. 12 S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed 13 S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed 14 Demolition Bricks (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed. 15 Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thickness removed or only a part thereof) complete all as specified and directed. 16 Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting pointcomplete all as specified and directed. 17 M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone crushed aggregates) on roof padding, surface finished even and smooth without using extra cement complete all as specified and directed. 18 M&L for providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer or equivalent (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalentcomplete all as specified and as per manufacturers instructions. 19 M&L for providing and applying Smartcare Dampproof or equivalent, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per manufacturers instructions and all as specified & directed. 20 Supply only integral water proofing compound (ISI marked) complete all as specified and directed 21 Demolition of brick work built in cement orcement lime mortar of any description including quoins,arches,pillars,etc., complete all as specified and directed 22 M & L for brick work with Cement Mortar 1:6 using sub class B bricks, old size, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed. 23 All As per item no 22 before but except bricks etc complete all as specified & directed 24 Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed. 25 Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) complete all as specified & directed 26 Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified & directed 27 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 28 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 29 S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. 30 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 31 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).Note: MTC and Screw Out Test shall be provided by Contractor 32 Supply and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of density 650 kg/cbm manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified& directed.”Note: MTC and Screw Out Test shall be provided by Contractor 33 S&F Aluminium windowfor outer frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter(02) size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm ss 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter(02) with 0.45mm nominal dia of SS wire mesh,SS 75mm long hinges & pvc magnet,full system powder coating with pure polyster coat of any shade as approved by GE and installing with SS screw roll plug and filled with silcone complete all as specified and directed. 34 S&F Aluminium windowOuter frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter (02) size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm SS 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter(02) with 0.45mm nominal dia of SS wire mesh,SS 75mm long hinges & pvc magnet,full system powder coating with pure polyster coat of any shade as approved by GE and installing with SS screw roll plug and filled with silcone complete all as specified and directed. NOTE:- For installation of windows AC/desert cooler the provn of window glass shutter with wire mesh,grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirementt during execution as direction of Engg-in-Charge. 35 S&F ventilator outer frame 40mmx40mm with 1.3mm thickness, corner 45 degre cut & aluminum welded center mullion size 40mmx65mm also welded , fixed 5mm frosted glass EPDM rubber gasket with provision for fresh air fan, full system powder coating with pure polister coat of any shade install with SS screw rol plug pvc & silicone complete all as specified & directed 36 Dismantling of wall and ceiling/cupboard board fibre pulp AC boards etc any thickness including cover fillets removing the wiring complete all as specified & directed 37 S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified & directed. Material test certificate and authentication should be compulsory provided by the contractor. (For WC/Bathroom/Toilet/Kitchen and Cabinets) 38 S&F stainless steel continuous (Piano) hinges, bright finish, width of flap when open 30mm, complete all as specified & directed. 39 S&F of stainless steel handles 100 mm sizefor kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. 40 S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed. 41 S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws complete all as specified & directed 42 S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked) complete all as specified & directed 43 S&F SS barrel tower bolt extruded section 150mm long and fixed with SS Screws (ISI Marked) complete all as specified & directed 44 S&F 150mm extruded SS handle fabricated type and fixed with SS Screws(ISI Marked) complete all as specified & directed 45 S&F 300mm extruded section SS sliding door bolt with hasp and staple and fixing bolt and nut (ISI Marked) complete all as specified & directed 46 S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar complete all as specified & directed. 47 M&L for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed 48 M&L for preparation of Old or previously treated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed. 49 S&F for stainless steel plate rack of size 90x80x25 cm depth size made out of 1mm thick sheet complerte all as specified and directed. 50 S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complete all as specified and directed. 51 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm etc complete all as specified & directed 52 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm etc complete all as specified & directed 53 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 40mm etc complete all as specified & directed 54 Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and directed 55 All as per item No. 54here in beforebut 20 mm dia complete all as specified and directed. 56 All as per item No. 54 here in beforebut 40 mm dia complete all as specified and directed. 57 S & F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed 58 Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for concealed water tubing etc cutting exceeding 10cm girth but not exc. 20 cm complete all as specified & directed. 59 Supply and fix in repairvitreous China wash hand basin (including pedestal)white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste pipe & waste coupling including all necessary fitting and fixtures complete all as specified & directed 60 Supply and fix in repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe) complete all as specified and directed, 61 S&F in repair vitreous china wash down water closet EWC white/ ivory/off white (closedpattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flushpipe) complete in all respect complete all as specified & directed 62 Supply only PVC low level white flushing cistern valveless symphonic action type 5/10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified & directed 63 S&F in repairs 15 mm dia 600mm long PVC connectionswith brass check nut complete all as specified & directed 64 S&F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complete all as specified and directed by Engineer-in-Charge. 65 S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railingcomplete all as specified and directed by Engineer-in-Charge. 66 S&F in repairsHealth faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge. 67 S&F fancy type brass chromium plated toilet paper holder, complete all as specified & directed 68 S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make-Jaquar/marc/Kohlar, complete all as specified & directed 69 S&Fin repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as specified & directed 70 S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as specified & directed 71 S&Ffor 15 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed 72 S&Ffor 20 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed 73 S & F in repairs Chromium plated brass overhead shower with arm complete all as specified and directed. 74 S&F in repairs looking mirror of size 600mmx450mmx5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 75 S&F in repairs Brass chromium plated mode 2 in 1 WHB mixture model Quarter half turn (SOLO) omplete all as specified & directed. 76 S&F in repairs brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO) complete all as specified & directed 77 S&F in repairs Brass chromium plated mode 2 in 1 sink mixturemodel Quarterhalf turn (SOLO) ofas complete all as specified & directed. 78 S&F in repairs chromium plated soap dish fancy type complete all as specified & directed 79 S & F in repairtowel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embedded in cement mortar 1:3 with MS screws etc complete all as specified and directed. 80 Dismantling of floor of size not exceeding 4.00 Sqm each for EWC and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (a) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 4.00Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. 81 Dismantling of floor of size not exc 1.50 Sqm for IWC and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (a) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. 82 Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. 83 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqmbut not exceeding 0.11 sqmas in floors over and including 15mm thick screed bedin cement mortar 1:4 set and jointedin neat cement slurry and pointed in coloured cement. complete all as specified and directed 84 S&F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.. 85 All as per item no. 84 here in before but on vertical surfaces as in skirting etc over and including 10mm thick screed bed in CM 1:3, set and jointed in white cement with pigment to match all as specified and directed. 86 M&L glazed ceramic coloured tiles in vertical surface600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 10mm thick in CM (1:3) complete allas specified & directed. 87 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc incl brushing neat cement slurry with 3.0kg of cement per sqmtr complete all as specified and directed. 88 M&L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes over and including cement mortar bedding of 20 mm thick in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. 89 M&L for machine cut kota stone slab flooring, and (one Pieces) as in tread, riser, landing, 20-25 mm thick over and including cement screed bed 20mm thick in CM 1:4laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 90 M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete all as specified and directed Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. 91 M&L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water.All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint complete all as specified and directed. 92 Demolition of cement concrete (un-reinforced) in any floor n.exc 15cm thickness ( below or above ground level ) not otherwise specially providedincluding removal of rubbish out side complex (MOD land), complete all as specified and directed 93 M&L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and directed 94 M&L for 40 mm thick cement concrete 1:2:4type B0(using 12.5mm graded stone aggregate) as in floor & surfaces finished even and fairusing extra cement, complete all as specified and directed 95 Demolition of reinforced cement concrete in any position complete all as specified and directed 96 M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone crushed graded aggregate) as in louvers and jallies 25mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown complete all as specified and directed 97 M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone crushed aggregate) as in roof slabs, slab supported on walls, cooking platform, beams and columns, in floors roofs, landings, balconies, canopies and in chajjas, parapet, shelves and the like complete all as specified and directed. 98 Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed. 99 S&F TMTmild steel bars of 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed. 100 Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortar of any diameter including bends complete all as specified and directed . 101 S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears ,110mm bore complete all as specified and directed . 102 S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete all as specified and directed 103 S&F for PVC (SWR) bends & tee any radius, 110 mm bore complete all as specified and directed. 104 S&F for PVC (SWR) bends & tee any radius, 75 mm bore complete all as specified and directed. 105 S&F for PVC (SWR) door plates , Yjunction 110 mm bore complete all as specified and directed. 106 S&F for PVC (SWR) door plates ,T junction 110 mm bore complete all as specified and directed. 107 S&F for 100 PVC (SWR) bends with door plate& teecomplete all as specified anddirected. 108 S&F for 75 mm PVC (SWR) bends with door plate & tee complete all as specified anddirected. 109 S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in solvent cement concrete complete all as specified anddirected. 110 S&F in repair 20 mm nominal dia and minimum thickness 1.2mm of SS-304 Grade of Stainless Steel tubefor curtain rod including pair of suitable S.S brackets approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed. 111 Dismantling wrought iron or mild steel work of any description not otherwise provided for parapet railing, balconies, tank staging, metre rooms shaft areaany descriptioncompleteas specified and directed. 112 Supply and fix welded steel wire fabric(MS Jali) fixed to steel members weight n. exc. 4 kg/sqm including welding complete all as specified and directed. 113 S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed 114 Dismentling asbestos cement corrugated orsemi corrugated sheets in roof fixed with L hook or cranked bolt complete all as specified and directed 115 S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge 116 S&F in repairs two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge. 117 ROAD, PATH AND CULVERT 118 Demolition of cement concrete (un-reinforced) in any floor n.exc 15cm thickness ( below or above ground level ) not otherwise specially providedincluding removal of rubbish out side complex (MOD land), complete all as specified and directed 119 M&Lfor 75 mm thick PCCtype D-2 1:4:8 (40mm graded aggreate) as sub-base complete all as specified and directed 120 S&F Endura colour paving tiles 30cm X 30cm x 15-20mm double charged digital printed with gloss, polished matt finished jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. 121 M&L for Providing PCC in coping type B-1, 1:2:4 using 12.5mm graded stone aggregate complete all as specified including necessary form work and finishing the exposed surface even and smoth with using extra cement complete all as specified and directed 122 M&L for broken stone boulders of hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed 123 SEWAGE DISPOSAL 124 Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loosesoil complete all as specified and directed 125 Returningfilling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed 126 Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed complete all as specified and directed 127 M&L for PCC 1 : 4 : 8 type D2 using 40mm graded stone crushed aggregates as in foundation of manholes, posts etc completeall as specified and directed. 128 M&L for PCC 1 : 2 : 4 type B1 using 20mm graded stone crushed aggregates as in surfaces channels and drains complete all as specified and directed. 129 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc complete all as specified and directed. 130 S&F DWCPE(SN8) 150mm dia (Internal Dia)pipes, snap fit coupler and rubber ring including testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified and directed. 131 Demolition of brick work built in cement orcement lime mortar of any description including quoins,arches,pillars,etc., complete all as specified & directed 132 M&L for Brick work with sub class ‘B’ bricks straight or curved on plan, built in cement mortar 1:4 using old size bricks complete all as specified and directed. 133 All as per item no 130 here-in-above but except bricks 134 M&L for PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Itemwater troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. 135 M&L for precast factory made manhole cover, area of each cover n.exc 0.60 Sqm, 100mm thick with SFRCconcretingincluding grove and hook arrangement for lifting and placing in position and sides covered by MS sheet complete all as specified and directed. 136 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100mm internal dia pipe, complete all as specified. 137 M&L for rendering 15mm thick on top of roof concrete in cement mortar 1:4 with water proofing compound @ 3% by weight of cement to have a smooth surface for laying of water proofing membrane. Note: Water proofing compound will be measured and paid seprately. 138 Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),150 mm diapipe of any description and in any position set and jointed in cement mortar complete all as specified and directed by Engr-in-Charge 139 INTERNAL ELECTRIFICATION 140 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc 141 Taking down old MCCB , TPN DBs , SPN DBs (incl MCB SPN & SP) & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. 142 Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed. 143 Disconnecting elect connection and taking down of ceiling fan/ Exhaust fanof any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete all as specified and directed by Engr- in- Charge. 144 M&L for point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit of 20 mm nominal diaand conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and including provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel concealed in walls, with modular sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, complete all as specified and directed for the following:- 145 One light /Ceiling fan/exhaust fan point controlled by one switch. 146 One light point controlled by two, two way switch ( switch to be measured and paid separtely) 147 One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. 148 One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board 149 One bell point controlled by one bell push. 150 All as per item Ser No 142 here-in-before but point wiring with 2.5 sqmm single core FRLS 1100 Volts in New PVC concealed conduitmedium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 2.5 sqmm single core FRLS 1100 Volts copper conductor cableas earth continuityconnected to common earthfor one 15 A switch socket power point, complete all as specified and directed 151 M&L for submain wiring 4 Sqmm nominal cross sectional area,two single core, 1100 Volts grade, multi-stranded, PVC insulated unsheathed, FRLSHcopper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of suitable dia, medium grade with all conduit accessories and connected to common earth dolly to suitable copper lugs including all cutting/chases etc in walls and making good to the disturbed surfaces to match the existingsurfaces.Note:- Three run of single core wire andone run of conduit shall be measured and paid as one unit complete all as specified and directed 152 All as per item ser No 144 here-in-before but for 02 x 6 Sqmm for phase & neutral and 01 x 6 Sqmm for continuousearth wire concealed/surface 153 M&L for switch Modular type 6 Amp one wayISI marked complete all as specified and directed. Make : Legrand Cat Part No 573400 / Schnider Cat No X1001WH / Wipro Cat No RF 110 154 M&L for switch Modular type 6 Amptwo wayISI marked complete all as specified and directed. Make : Legrand Cat Part No 2573402/ Schnider Cat No X1002WH/Wipro Cat No RF 210 155 M&L for switch Modular type type 16 Ampone way,ISI marked complete all as specified and directedMake : Legrand Cat Part No 573410/ Schnider Cat No X11001WH/Wipro Cat No RF 130 156 M&L for Modular type socket outlet 2 in 1, 5 pin 6 Amp ,ISI marked complete all as specified and directed. Make : Legrand Cat Part No 573424/ /Schnider Cat No X2005WHNS/Wipro Cat No R 1212 157 M&L for Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified and directed. Make : Legrand Cat Part No 573471/ Schnider Cat No X2106WH/ Wipro Cat No R 1332P 158 M&L for ceiling rose 3 phase PVCpolycorbonate,isolated body, complete all as specified and directed 159 M&L for bell push,modular type, 6 Amp, 1 moduleISI marked complete all as specified and directed.Make : Legrand Cat Part No 573413/ Schnider Cat No X1005WH/ equivalent in Wipro 160 M&L for bell ding dong AC, 230 volts, single pole complete all as specified and directed. 161 M&L for angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete all as specified anddirected. 162 S&F LED bulb 12 watts, 1200 lumens output, 6500K suitable for B-22 base complete all as specified and directed. 163 M&L for earthing complete with GIelectrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earthplate not less than 1.50 mtr below normal ground level connected to GI wire 4.0 mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze drilled and screwed all as specified including excavation and earth work and disposal of surplus soil incl 15 mm GI tubing light grade and necessary fitting for protection of GI wire incl laying of alternate layer of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MSangle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia GI pipe Medium grade for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. Note:- Galvanised wire and protection light grade GI pipe upto 7.5 mtr, excavation, etc shall be deemed to be in the quoted rates. 164 S&F sheet metal enclosure distribution board confirmingto IEC - 61439-3, single pole and neutral, AC 240 volts, 08 way witn 100 Amps rated copper bus bar and metal double door with IP-43 & IK 09protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make) 165 S&F sheet metal enclosure distribution board confirmingto IEC - 61439-3, single pole and neutral, AC 240 volts, 12 way witn 100 Amps rated copper bus bar and metal double door with IP-43 & IK 09protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make) 166 S&FMCB confirming to ISI/IEC -60898-1 (2002), SPN, AC, 240 volts, of 40Amps capacityB curve, 10 kA breaking capacity & making connection by using using suitable copper lugs complete all as specified and directed. 167 S&FMCB confirming to ISI/IEC -60898-1 (2002), SP, AC, 240 volts, of 6-32Amps capacityB curve, 10 kA breaking capacity & making connection by using using suitable copper lugs complete all as specified and directed. 168 Supply and fix in replacement LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 120 Lumens/watt andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. 169 S&F in replacement of LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥120 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. 170 M&L for in replacement Decorative wall mounting CITY-1 Decorative wall light fixture made up of Polycarbonate,Power Factor > 0.90 voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 110 Including 12 W retrofit LED BULB (B-22 base). NOTE- one piece of LED bulb 12 watts included with city -1 fitting complete all as specified and directed. 171 Supply and fix in replacement 10 watts bulkhead fitting, IK 09 with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover,including connecting up with necessary PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire fixed completeallas specified and directed. 172 Taking down existing electric meter & refixing the same after completion of job with electric connection by 8 way DB in good way by cleaning and qtr No. marking complete all as specified and directed.. 173 Supply and fixingexhaust fansmetal body AC single phase 230/240 V of size300 mm sweep, Air flow rate > 900cum/min, Bird screen forprotectionagainst birds, double ball bearing, metal body with louvre also with louvre for fixing of exhaust fan complete all as specified and directed. 174 Supply and fixing new BLDC fan against old ceiling fans BLDC conversionthree blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5star rating for energy saving, rated Air delivery >220 cum/min,AC single phase 230/240 V of size 1200 mm sweep including fan regulators,down rod, canopy & all accessories including making connection with three core flexible, copper winding in fan,copper cable pvc insulated of suitable length, complete all as specified and directed. NoteBLDC Fan should work onelectronic fan regulator & also with remote controled. 175 S&F modular type sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall complete all as specified and directed. 176 S&F of water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity25 Ltrs, having heating element 1.5 KW and not less than 5 star rating,suitable for ,230 volt,50 Hz electric supply complete all as specified and directed . 177 S&F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed. 178 S&F in replacement pressure die cast aluminium housing LED street light luminaires with IP-66 deg. of protection suitable for 35 watt LED fitting, Power Factor > 0.90 voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 110 duly fixed on 25 mm dia GI pipe light grade including 40 X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : Quoted rates shall be inclusive of all accessories like suitable GI pipe, 40x6 mm thick MS flat, fastner, nut & bolts, suitable length of flexiable wire etc. 179 S&F in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-43 protection), mechanical impactstrength IK - 09, with cement spill protector double doorfabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 125/160 Amp as incomer and12 Nos of SP MCB 10 to 63 Amps outgoing and conforming to HSN code : 8537 complete all as specified and directed. Note :- MCCB & MCB will be measured & paid separately. 180 S&F in replacement MCCB 125 Amps, thermal magnetic release,4 pole 16 kA ICS=ICU Complete all as specified and directed.
Contract Date: May 30, 2026 Contract Value : 3.02 Crore
Statutory Bodies & Commissions/Committees No of Bidders 11
6.
Defence #11191784 Price Bid
Tender for Taking Down Cement / Lime Plaster Of Any Description On Brick Work Or Stone Walls Etc Including Racking Out Joints Hacking For Key Scrubbing Down With Water Etc.Complete All As Specified And As Directed , M&L For Rendering 10 Mm Thick On Brick Or Concrete Surface Of Walls In Cement Mortar 1:6 Finished Even & Smooth Without Extra Cement On Internal Wall Surface Complete. , M&L For Rendering 15 Mm Thick On Brick Or Concrete Surface Of Walls In Cement Mortar 1:4 Finished Even & Smooth Without Extra Cement Including Mixing Only Water Proofing Compound As Per Manufacturer Instruction On External Wall Complete. Note:- Wpc Will Be Measured & Paid Separately , Supply Only Integral Water Proofing Compound , M&L For Preparation Of Newly Plastered Surfaces Of Wall And Applying Two Coat Of Oil Bound Distemper Over A Coat Of Primer Complete All As Specified And Directed , M&L For Preparation Of Newly Plastered Surfaces Of Wall And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , M&L For Preparation Of Newly Plastered Surfaces Of Wall And Applying Two Coats Of Weather Proof Exterior Emulsion Over A Coat Of Primer Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Surfaces By Washing, Rubbing Down And Stopping Of Painted , Plastered Or Un-Plastered Surfaces Of Walls And Applying One Coat Of Oil Bound Distemper White Or Tinted Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Surfaces By Washing, Rubbing Down And Stopping Of Painted , Plastered Or Un-Plastered Surfaces Of Walls And Applying One Coat Of Cement Base Paint Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Surfaces By Washing, Rubbing Down And Stopping Of Painted , Plastered Or Un-Plastered Surfaces Of Walls And Applying One Coat Of Weather Proof Exterior Emulsion Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Surfaces Of Plastered Or Un-Plastered Surfaces Of Ceiling And Applying One Coat Of White Wash Complete All As Specified And Directed. , M&L For Preparation Of Old Surfaces Of Steel Exc 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete As In Roof/Wall Cladding All As Specified And As Directed By Engineer-In-Charge. , M&L For Preparation Of Old Surfaces Of Steel Exc 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete As In Door/ Gates,Windows,Railings,Structural Horizontal & Vertical Members & Similar Work All As Specified And As Directed By Engineer-In-Charge. , M&L For Preparation Of Old Wooden Surfaces And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified & As Directed. , Material & Labour For French Polishing Two Or More Coats On Wooden Surfaces Of Any Description, Width Or Girth Including Cleaning And Preparing The Surface Including A Coat Of Wood Filler On Old Work Till To Obtain The Mirror Finish Look Of The Surface Complete All As Specified And Directed. , Demolition Of Brick Work Masonry/Precast Block/Stone Masonry Built In Cement Mortar Or Cement Lime Mortar Including All Quoins, Arches, Pillars Etc But Excl Ashlars Facing,Dressed Stone Work And Pre-Cast Concrete Articles Complete All As Specified & Directed By Engr-In-Charge , M&L Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar (1:6) Complete All As Specified & Directed By Engr-In-Charge , M&L For Rendering 15 Mm Thick In Cement Mortar 1:4 On Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified. , Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces Complete All As Specified. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises.Complete All As Directed. , M&L For Non Skid Coloured Ceremic Tiles 7 To 8 Mm Thick (Square / Rectanguler) Area Of Each Tile Exceeding 0.11 Sqm But Not Exeeding 0.18 Sqm As In Floors Etc Laid Over And Including 15 Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:6, Set And Jointed In Neat Cement Slurry And Pointed With Coloured Cement To Match The Tiles Complete All As Specified & Directed By Engr-In-Charge. , M&L For Glazed Ceramic Coloured Tiles 300X450mmx7mm Thick On Wall/Vertical Surfaces Such As Skirting, Dados And Riser To Steps Etc Including Laid Over 10Mm Thick 1:3 Cement Mortar For Laying Wall/Vertical Finish Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match All Complete All As Specified & Directed By Engr-In-Charge. , M&L For Vitrified Ceramic Tiles 9 To10 Mm Thick (Square / Rectangular) Light Shade Polished Area Of Each Tiles Not Exceeding 0.36 Sqm As In Floors Etc Laid Over And Including 15 Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:6, Set And Jointed In Neat Cement Slurry And Pointed With Coloured Cement To Match The Colour Tiles Complete All As Specified & Directed By Engr-In-Charge. , M&L For Chequered Cement Concrete Tiles 25Mm Thick With Grey Cement & Pigment In Reqd Proportion, Set,Area Of Each Tile Exceeding 0.05 Sqm But Not Exceeding 0.09 Sqm, Jointed And Pointed In Near Cement Slurry In Floors,Laid On Screed Bed Or Bedding Layer Of Mortar 15Mm Thick 1:6 Cement Mortar Complete All As Specified & Directed , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exceeding 15 Cm Thickness.(Below Or Above Ground Level) Complete All As Specified And Directed. , M&L For 75 Mm Thick Plain Cement Concrete, 1:3:6, Type C-2, Using 40Mm Graded Stone Aggregate As In Path/Plinth Protection, Laid In Alternate Bays Including Finishing The Surfaces Even And Smooth Without Using Extra Cement All As Specified & As Directed. , M&L For Plain Cement Concrete Type B1 1:2:4 Using 20 Mm Graded Aggregate In Cills, Steps, Parapets , Copings, Kneelers, Apex Stones, Bed Plates, Kerbs, Flooring, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating, As Directed Complete All As Specified & Directed. , M&L For 75Mm Thick Plain Cement Concrete (1:3:6) Type C2 (Using 40 Mm Graded Stone Aggregate ) As In Sub Base To Floors And Paving Etc Complete All As Specified And Directed. , M&L For 100 Mm Thick Plan Cement Concrete 1:2:4, Type B1 (Using 20 Mm Graded Stone Aggregate) As In Hardstanding,Path, Flooring Surface Finished Even & Smooth Using Extra Cement Complete All As Specified & Directed By Engr-In-Charge. , Dismantling Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Laid, Bedded, Pointed In Mortar Etc , M&L Granite 20Mm Thick (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window Cills, Cooking Platform And Like In And Including Cement Mortar Backing Cm (1:4),15 Mm Thick, Including Molding, Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Complete All As Specified And Directed. , Dismantling Mild Steel Or Wrought Iron Work In Roof Trusses,Gratings Etc And Similar Work Complete All As Directed , M&L For Mild Steel Work In Roof Trusses,Purlins,Rafters,Wind Ties,Crane Gantries,Rails And Fastenings And Heavy Bracket Framing (Beam,Tee,Angle,Channel Or Flat Sections) Including Distance Pieces,Cleats Etc Complete All As Specified And Directed. , Dismantaling Of Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness, Including Nainital Or Similar Pattern Roof Coverings Complete All As Specified & Directed. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strenth Of 550 Mpa As In Roof Covering / Clading To Waall , Fixed Self Tapping Screws Complete All As Specified And Directed. , S&F Pre-Painted Galvatume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strenth Of 550 Mpa As In Roof Covering / Clading To Waall , Fixed Self Tapping Screws Complete All As Specified And Directed. , S&F Galvanised, Corrugated 0.63Mm Thick Mild Steel Sheeting With Two Corrugations Side Lap, Fixed With L-Type Or J-Type Or Cranked Hook Bolts, With Bitumen Washer / Screws Complete All As Specified And Directed. , All Same As Per Item No. 37 Above But Except Sheeting (Any Thickness) Complete All As Specified And Directed . ( Note :- Old Sheet Shall Be Obtaind From Item No - 34 Above) , S&F Plain, Galvanised, 0.63Mm Mild Steel Sheeting, In Ridges, Hips, Valley Gutters, Drip And Straight Flashings (Length And Girth As Fixed) With Grade Of Zinc Coating 275 Fixed With L-Type Or J-Type Or Cranked Hook Bolts, With Bitumen Washer / Screws In Normal/Nainital Pattern Complete All As Specified And Directed. , All Same As Per Item No. 39 Above But Except Sheeting (Any Thickness) Complete All As Specified And Directed . ( Note :- Old Sheet Shall Be Obtaind From Item No - 34 Above) , Dismantling Of Wall And Ceiling Boards (Fiber, Pulp, Insulation Etc,) Or Insulation Boards/Slabs/Blankets, Any Thickness Including Cover Fillet Complete All As Specified And Directed. , S & F For Powder Coated Aluminium Anodised Snap Grid System Of Grid Size 600 X 600 Mm Fixed To Walls With Rawl Plugs And Screws And Hang To Roof Members With 2 Mm Dia Gi Wire Comprising Of The Main Tee 28X24x3mm Thick, Cross Tee 28X24x3mm Thick And Wall Angle 24X24x3mm Thick Sections Complete All As Specified And Directed:- , S & F 4 Mm Thick Everest Designer Ceiling (E-Board Classic) Board / Tiles For Insulation And Accoustic Purpose, 595 X 595 Mm Size Fixed With Staples On Gi/Aluminium Snap Grid As In Ceiling With And Including Dusting Of Surface And Applying Two Coats Of Oil Bond Distemper Over A Coat Of Primer Complete All As Specified And Directed , S & F In Repairs 6Mm Thick Decorative Pvc Sheet Hollow (Design Approved By Ge) For Insulation And Acoustic Purpose On Wall Surface, Screw To Timber Frame Work For Levelling Of Wall As Reqd, Including With Panelling To Vertical Surfaces, Fixed With Rawl Plug And Screws Complete All As Specified And Directed , Dismantling Of Boarding , Any Description Fixed In Any Position Like Wall ,Wooden Flooring And Ceiling Boards (Fiber, Pulp, Insulation Etc,) Or Insulation Boards/Slabs/Blankets, Any Thickness Including Cover Fillet Complete All As Specified And Directed. , S&F For 8Mm Thick, Wooden Pieces, Machine Presured One Side Laminated And Other Side Balancing Green, As In Parquet Flooring With And Including Necessary Padding As Soft Wool Graded Type As Required At Site, Fixed With Adhesive As Per Manufacturers Instructions Including Taking Down Old Wooden Flooring With Or Without Plywood Complete All As Specified And Directed. , -Ditto- All As Per Item No. 47 Above But Except Material. , M&L For 12 Mm Thick Plywood, Grade Bwr, Type Bb, Number Of Ply 7 Nos Fixed With Screws To Timber Frame Work Complete All As Specified And Directed , S & F Second Class Hardwood 25 Mm Boarding Plain One Side With Butt Joint Fixed With Nails In Any Situation Complete All As Specified And Directed. , M/L For 0.90 Mm Thick Decorative Laminate Type 1 Of Surface Finish,Colour And Pattern As Approved, Fixed With Approved Adhesive As Per ManufacturerS Instructions Complete All As Specified And Directed , Dismatling Timber Scantling 40 Sqcm And Above In Any Position ,Unframed Work Complete All As Specified And Directed , M&L 2Nd Class Hard Wood As In Scantling Clean Sawn As In Floor/Roof/Truss/Purlin & Similar Work Of Any Description In Framed Work Complete All As Specified And Directed. , Taking Down Wooden Chowkhat Or Frame Area Not Exc 1.5 Sqm Each With Shutter (Without Taking Off Shutter From Frame) As Directed. , Taking Down Wooden Chowkhat Or Frame Area Exc 1.5 Sqm And Not Exc 4 Sqm Each With Shutter (Without Taking Off Shutter From Frame) As Directed. , Taking Down Of Shutters Of Any Description Not Exc 1.0 Sqm Each And Resecuring Or Easing And Adjusting With Refixing In Same Opening With Using Of Necessary Arrengements Complete All As Specified And Directed. , Taking Down Of Shutters Of Any Description Exc 1.0 Sqm But Not Exc 2.0 Sqm Each And Resecuring Or Easing And Adjusting With Refixing In Same Opening With Using Of Necessary Arrengements Complete All As Specified And Directed. , Taking Down Shutters ( Per Leaf ) Of Any Description Not Exc 1 Sqm Each Complete All As Specified And Directed. , Taking Down Shutters ( Per Leaf ) Of Any Description Exc 1 Sqm But Not Exc 2 Sqm Each Complete All As Specified And Directed. , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkhats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, And Making Good With Existing Surface As Complete As Specified And Directed. , S & F 35 Mm Thick Second Class Hard Wood Glazed And Skeleton Door Shutters, Open Rebated And Prepared To Receive Gauze Without Sash Bars, Edges Of Framing Plain Fitted With Cut And Mitred Beads For Securing Wire Mesh Or Glass, Size Of Members Of Shutter As Specified In Ssr Pt-I Sec-8 Clause 8.24(A) Fitted To Chowkats, Complete As Specified And Directed. , S&F 35 Mm Thick Second Class Hardwood Plain, Framed, Panelled Shutters (Any Number Of Panels), With Panels Of Timber Flat On Both Sides (Feather Edged), Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers: Supplied And Fitted To Chowkats Complete All As Specified & Directed. , S&F 30 Mm Thick Flush Shutters Solid Core Construction With Block Board Core And Plywood Face Panels Commercial Type On Both Sides. , S&F 30 Mm Thick Second Class Hard Wood Glazed And Skelton Window And Ventilators Shutters Open Rebated And Prepaired To Received Glass Gauge Etc Divided Into Square With Sash Bar Edges Of Framing Plain Chamfered Or Rounded Fitted With Cut And Mittered Beads For Sequring Glass Gauge Etc , Size Of Members Of Shutters As Specified In Mes Ssr -I Section 8 Clause 8.24 (B) Complete All As Spcified And Directed , M&L Mild Steel Work In Framed Work Such As Grills, Gratings, Guard Bars Etc., With Ends Of Bars Shouldered And/ Or Riveted, Or Forged Into Spikes, And Similar Work Confirming To Fe 290.Gde-E-165, Complete All As Specified And Directed. , Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden Frames Or Stone, Concrete Or Brick Surrounds, Glazed With Putty Or Fixed With Beads As Directed. , S&F Sheet Glass Ordinary Quality & Glazing With Wooden Bead/Oil Putty In Square N.Exc 0.5 Sqm In Each Panel 3 Mm Thick Complete All As Per Specified And Directed. , S & F 3 Mm Thick Figured Glass, Pin Headed Type And Glazing With Oil Putty In Squares Not Exceeding 0.5 Sqm In Each Pane Complete As Specified And Directed. , S&F Sheet Glass Ordinary Quality & Glazing With Wooden Bead/Oil Putty In Square N.Exc 0.5 Sqm In Each Panel 5.5 Mm Thick Complete All As Per Specified And Directed. , S & F Galvanized Mild Steel Wire Cloth, 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm And Fixed With Tinned Stacks, Or Galvanized Wire Staples, Complete All As Specified And Directed. , Supply And Fixing 75 Mm Butt Hinges Medium Weight Cold Rolled Mild Steel Isi Marked Fixed With Wooden Screws Complete As Specified And Directed. , Supply And Fixing 100 Mm Butt Hinges Medium Weight Cold Rolled Mild Steel Isi Marked Fixed With Wooden Screws Complete As Specified And Directed. , Supply And Fixing 100 Mm Mild Steel Pressed Handles, Oval Type, Stove Enamelled Black And Fixed With Wooden Screws, Complete As Specified And Directed. , Supply And Fixing 150 Mm Mild Steel Pressed Handles, Oval Type, Stove Enamelled Black And Fixed With Wooden Screws, Complete As Specified And Directed. , M&L For Mild Steel Barrel Tower Bolts Stove Enameled Black, With Bright Bolt Length Of Bolt 100 Mm (Isi Marked) Fixed Complete Fixed With Screws,Complete As Specified And Directed. , M&L For Mild Steel Barrel Tower Bolts Stove Enameled Black, With Bright Bolt Length Of Bolt 150 Mm (Isi Marked) Fixed Complete Fixed With Screws,Complete As Specified And Directed. , Supply And Fixing Mild Steel Sliding Door Bolt Clip Type (Isi Marked) Stove Enameled Black With Bright Bolt Not Less Than 12 Mm Dia With And Including A Minimum Of 6 Bolts, Length Of Bolt 250 Mm And Fixed With Mild Steel Wood Screws All As Specified And Directed , S&F In Repair Butt Hinges, Medium Weight, Cold Rolled Mild Steel, 75Mm Size Complete All As Specified And As Directed , S&F In Repair Butt Hinges, Medium Weight, Cold Rolled Mild Steel, 100Mm Size Complete All As Specified And As Directed , S&F In Repair 100 Mm Mild Steel Pressed Handles, Oval Type, Stove Enamelled Black And Fixed With Wooden Screws, Complete As Specified And Directed. , S&F In Repair 150 Mm Mild Steel Pressed Handles, Oval Type, Stove Enamelled Black And Fixed With Wooden Screws, Complete As Specified And Directed. , S&F In Repair Mild Steel Barrel Tower Bolts Stove Enameled Black, With Bright Bolt Length Of Bolt 100 Mm (Isi Marked) Fixed Complete Fixed With Screws,Complete As Specified And Directed. , S&F In Repair Mild Steel Barrel Tower Bolts Stove Enameled Black, With Bright Bolt Length Of Bolt 150 Mm (Isi Marked) Fixed Complete Fixed With Screws,Complete As Specified And Directed. , S&F In Repair Mild Steel Sliding Door Bolt Clip Type (Isi Marked) Stove Enameled Black With Bright Bolt Not Less Than 12 Mm Dia With And Including A Minimum Of 6 Bolts, Length Of Bolt 250 Mm And Fixed With Mild Steel Wood Screws All As Specified And Directed , S&F In Repair Mild Steel 300Mm Ordinary Rat Tail Rod Pattern Spring Including Roller And Roller Plate Complete Complete All As Specified & Directed. , S&F In Repair 150Mm ,Floor Door Stopper Of Aluminium Alloy Body And Tongue, Anodised, With Hard Drawn Steel Spring, Fixed In Floor Complete Complete All As Specified & Directed. , M&L Preparation Of New Or Previously Untreated Wood And Wood Based Surfaces Of Any Description, Not Otherwise Described, Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint (Ordinary Tint) Over A Coat Of Pink Primer Complete All As Specified And Directed. , M&L Preparation Of New Or Previously Untreated Steel Surfaces Of Any Description, Over 10 Cm Width Or Girth, Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint (Ordinary Tint) Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , S&F In Repair 25 Mm Dia Curtain Rod/Harrison Rails,Mild Steel, Chromium Plated Fancy Type Fixed With End Brackets, Stops ,Rollers & All Connected Accessories Complete All As Specified And Directed. , Disconnecting Existing Water Tank Setting Aside ( Or Lowering If Required ) For Repairs Cleaning Etc And Hoisting If Required Reconnecting And Re-Fixing In Position Including Cleaning And Removing All Scale And Dirt Etc From Tanks And From Mouths Of Circulating Pipes Etc Cap Exc 250 Ltr & N. Exc 500 Ltrs, Complete All As Specified And As Directed By Engr-In-Charge. , Disconnecting Existing Water Tank Setting Aside ( Or Lowering If Required ) For Repairs Cleaning Etc And Hoisting If Required Reconnecting And Re-Fixing In Position Including Cleaning And Removing All Scale And Dirt Etc From Tanks And From Mouths Of Circulating Pipes Etc Cap Exc 500 Ltr & N. Exc 1000 Ltrs, Complete All As Specified And As Directed By Engr-In-Charge. , Dismantling Pvc Water Tanks And Removing From Site Capacity For Exc 250 Ltrs But N. Exc 500 Ltrs Complete All As Specified And As Directed. , Dismantling Pvc Water Tanks And Removing From Site Capacity For Exc 500 Ltrs But N. Exc 1000 Ltrs Complete All As Specified And As Directed. , M&L For Rotational Moulded Polyethylene Water Storage Tank 250 Ltrs Capacity Double Layered Cylindrical Vertical With Closed Top Hoisted And Fixed In Position Including Fittings All As Specified And As Directed. , M&L For Rotational Moulded Polyethylene Water Storage Tank 500 Ltrs Capacity Double Layered Cylindrical Vertical With Closed Top Hoisted And Fixed In Position Including Fittings All As Specified And As Directed. , M&L For Rotational Moulded Polyethylene Water Storage Tank 1000 Ltrs Capacity Double Layered Cylindrical Vertical With Closed Top Hoisted And Fixed In Position Including Fittings All As Specified And As Directed. , S&F 20Mm Bore Ball Valve, High Pressure With Epoxy Coated Aluminium Rod And High Density Plastic Vavle Screwed For Iron Pipe And Fixed Of 20Mm Dia (Min Wt 210 Grms) Complete All As Specified And Directed. , S&F In Repair 15Mm Bore Ball Valve/Float Valve, High Pressure With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed Of 15Mm Dia (Min Wt 142 Grms) Complete All As Specified And Directed. , S&F In Repair 20Mm Bore Ball Valve/Float Valve, High Pressure With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed Of 20Mm Dia (Min Wt 210 Grms) Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Tubing And Connections, Complete All As Specified And As Directed , Taking Up Or Down 20 Mm Bore Steel Tubing And Connections, Complete All As Specified And As Directed By Engr-In-Charge. , Supply And Fix 15 Mm Bore Galvanized Steel Water Tubing, Medium Grade Including Necessary Fittings Such As Gi Bends, Tee, Union Etc Fixed On Wall / Floor Complete And Connecting To Water Supply Pipe Line All As Specified And As Directed By Engineer-In-Charge. , Supply And Fix 20 Mm Bore Galvanized Steel Water Tubing, Medium Grade Including Necessary Fittings Such As Gi Bends, Tee, Union Etc Fixed On Wall / Floor Complete And Connecting To Water Supply Pipe Line All As Specified And As Directed By Engineer-In-Charge. , Supply And Fix In Repair White Vitreous China Squatting Pan ‘Orissa Pattern Of Size 580 Mm X 450 Mm White With Integral Foot Rests With ‘P Or ‘S Trap, Front Or Back Inlet Including All Connection And Provision Of Lime Concrete Base Complete All As Specified And As Directed.. , S&F In Repair Vitreous China Wash Down Water Closet Pan (Padestal Pattern) With Seat Cover (Excluding Fixing Bolts, Flushing Cistern And Flush Pipe) Etc Complete All As Specified And As Directed. , S&F In Repair Flushing Cistern 10Ltr Capacity Pvc Valveless, Syphonic Action Type, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets Complete All As Specified & Directed. , S&F In Repair For Wash Basins, Vitreous China (Flat Back Or Angle Back Type) Size 580X450mm, Including Cutting For And Pinning In Ends Of Brackets Or Erecting Stand But Exclusive Of Fixing Of Supply And Waste Pipe , Complete All As Specified And As Directed. , S&F In Repair Single Piece Ewc Combined With Flushing Cistern, Waste Pipe, Trap, Seat Cover, Jet Spray Including All Necessary Accessories, Fittings & Bolts Complete All As Specified & Directed. Make- Jaguar Lyric Single Piece Ewc P-180 Complete All As Specified And Directed. , S&F In Repair Bathroom Tabletop Ceramic Washbasin (Size Not Less Than 500X300x125mm) Over Marble Counter And Bwr Plywood Cabinet (White) As Approved By Ge With Waste Pipe, Coupling And Fittings Complete All As Specified & Directed. Make- As Approved By Ge , S&F In Repair 15 Mm Dia Bib Tap Cast Copper Alloy, Fancy Type Chromium Plated ,With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule All As Directed. , S&F In Repair Fancy Type 15 Mm Dia Pillar Taps ,Cast Copper Alloy ,With Capstan Heads Chromium Plated Screwed Down High Pressure, With Or Without Letterd Hot Or Cold With Long Screwed Shanks And Fly Nuts ,Screwed For Iron Pipe And Fixed. , S&F In Repair Brass Cp Stop Valve/ Angle Valve 15 Mm Fancy Type With Long Shank And Cup Fixed. , S&F In Repair 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood & Fixed To Wooden Plugs With Cp Brass Screws & Cup Washers Complete All As Specified & Directed. , S&F In Repair Toilet Paper Holder( White) With Flat Recessed Type Stainless Steel Complete All As Specified And Directed. , S&F In Repair Plastic Water Closet Seat, Black, Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified & Directed. , S&F In Repair Soap Dish Tray Embedded In Wall , Vitreous China White, Approximate Size 160X160x90 Mm Complete All As Specified & Directed. , S&F In Repair Pvc Connection 15Mm Size With Brass Nuts Of Length 450Mm Complete All As Specified & Directed. , S&F In Repair Tubular Brass Chromium Plated Towel Rail, 20Mm Dia, D Type, 60Cm Long Between Flanges Complete All As Specified & Directed. , S&F In Repair 15Mm Bore Fancy Type Chromium Plated Central Hole Wash Basin Mixer With 450Mm Long Braided Hoses,Screwed Down High Pressure With Or Without Lettered Hot And Cold Srcrewed For Iron Pipe Complete All As Specified & Directed. Make-Jaguar Or Equivalent Approved By Ge , S&F In Repair 15Mm Bore Fancy Type Chromium Plated Wall Mixer With Provision For Overhead Shower With 115Mm Long Bend Pipe On Upper Side, Connecting Legs And Wall Flanged,Screwed Down High Pressure With Or Without Lettered Hot And Cold Srcrewed For Iron Pipe Complete All As Specified & Directed. Make- Jaguar Or Equivalent Or Approved By Ge , S&F In Repair Ptmt Nipple 15 Mm Bore Dia For Hdpe Water Tank(Min Weight-38 Gms) Complete All As Specified & Directed. , S&F In Repair Ptmt Nipple 20 Mm Bore Dia For Hdpe Water Tank(Min Weight-45 Gms) Complete All As Specified & Directed. , S&F In Repair Union Brass Of 15Mm Bore Dia To Connect Iron To Polyethylene Complete All As Specified & Directed. , S&F In Repair Union Brass Of 20Mm Bore Dia To Connect Iron To Polyethylene Complete All As Specified & Directed. , S&F In Repair Elbow/Tee Of 15 Mm Bore Dia Brass All Ends Screwed And Fixed Complete All As Specified & Directed. , S&F In Repair Elbow/Tee Of 20 Mm Bore Dia Brass All Ends Screwed And Fixed Complete All As Specified & Directed. , S&F In Repair 32 To 40 Mm Dia Pvc Waste Pipe For Wash Basin And Kitchen Sink Complete All As Specified & Directed. , Taking Up 80Mm Bore Pipes Cast Iron Water Mains (Including All Fittings), With Spigot And Socket Ends And Lead Joints Includingburning Out Joints And Recovering Lead Complete All As Specified And As Directed , S&F In Repair Pvc (Swr) Pipes 75 Mm Dia Single Socketed, In Any Length With Rubber Ring Joints, Fixed On Walls Or Floors Complete All As Specified And As Directed , S&F Pvc (Swr) Plain Bend 75 Mm Dia, Of Any Redius With Rubber Ring Joints, Complete All As Specified And As Directed , S&F Pvc (Swr) Plain Bend 110 Mm Dia, Of Any Redius With Rubber Ring Joints, Complete All As Specified And As Directed , Taking Up 100 Mm Bore Pipes Cast Iron Water Mains (Including All Fittings), With Spigot And Socket Ends And Lead Joints Includingburning Out Joints And Recovering Lead Complete All As Specified And As Directed , S&F In Repair Pvc (Swr) Pipes 110 Mm Dia Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Or In Floors Complete All As Specified And As Directed , S&F 32Mm Dia Waste Fittings, Brass, Chromium Plated For Glazed Ware Sinks, Basins, Etc With Long Screwed Shanks And Fly Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed. , S & F In Repairs 15 Mm Bore Fancy Type Telephonic Shower (Healthfaucet), Cast Copper Alloy, With Chromium Plated, Screwed Down High Pressure With Or Without Lettered Hot Or Cold With Lenght Not Less Than 1.0Mtr Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe/Stop Value And Fixed As Cat No 455, Make:- Prayag Or Equavalent As Approved By Ge. , M&L For 75Mm Dia Pvc Nahani Trap Or Floor Trap With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete (1:2:4) Type B1 Complete All As Specified And Directed. , S&F In Repair Sink With Drainage Board Made Of Stainless Steel 1Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm Complete All As Specified And Directed. , S& F Power Coated Aluminum (Minimum Thikness Of Power Coated 50 Micron ) Work For Doors Windows, Ventilators And Partition (Fixed Portion ) With Extruded Built Up Standard Tubular Section/Approriate Z Section And Other Section Of Approved Make Confirming To Is 733 And Is 1285 , Fixing With Dash Fasteners Of Required Dia And Size, Inc.Necessary Filling Up The Gaps At Junction , I.E. At Top , Bottom And Sides With Required Epdm Rubber/Neoprene Gasket Etc Aluminium Sections Shall Be Smooth And Rust Free Straight , Mitered And Jointed Mechnicallly Where Ever Required Incl. Cleat Angle . Aluminium Snap Beding For Glazing/Paneling , C.P Brass / Stainless Steel Screws , All Complete As Per Architectural Drg And Direction Engr - In Charge , S &F Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/Neoprene Gasket Required (Fittings Shall Be Paid For Separately) With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling, C.P. Brass/ Stainless Steel Screws All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. , S&F In Reparis 15Mm Bore Bib Tap Standard Of Ptmt Any Colour High Pressure Screwed For Iron Pipe And Fixed With And Including Wall Flange (Minimum Weight 15Mm-90Gms)Complete All As Specified And As Directed (Make : Prayag Or Equivalent). , S&F Aluminium Die Cast Body Door Closer Hydraulically Regulated Designation No,2 Universal Type Suitable For Door Shutter Of 701 To 850Mm Width And Of Weight Between 36 To 60 Kg Isi Marked Complete. , S&F In Repair Vitreous China Urinal, Half Stall Type, White With Waste Pipe And Cp Brass Spreader Complete Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plug With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Flush Pipe, Grating And Union For Discharge Pipe Including Cp Urinal Spreader For Fixing With 15 Mm Dia Pipe Complete All As Specified. , Supply Only Water Tank Cover For Tanks Of Size 500 Ltr Or 1000 Ltrs Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttarakhand View Result →
7.
Defence #11104420 AOC
Tender For Repairs / Re-Novation Of Ofti And Ofti Work Shop Buildings Inside Factory Area At Ofmk.; 1 Site clearence 2 FELLING OF TREE: Felling of tree exc.30 cm and not exc.100 cm girth including cutting of trunk and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50m and clearing site 3 GRUBBING UP TREE TRUNK : Grubbing up tree trunk of girth exceeding 100 mm and not exceeding 150 mm, including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable materials and removing of unserviceable materials to a distance n. exc. 50 m and clearing site. 4 Demolition of cement concrete of any description and in any position not otherwise specifically provided for.Complete all as specified directed. 5 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar. Complete all as specified directed. 6 Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Complete all as specified directed. 7 Dismantling floor,heartor wall tiling including cement mortar bedding but nor baking removing serviceable tiles to stores and rubbish off the premises.Complete all as specified directed and directed. 8 Taking down : Taking downcement or cement lime plaster, any description on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. 9 Removing building materials etc.other than spoilupto a distance of 1.0 Km, including loading, unloading and stacking at the destination. 10 Brick work with sub class ‘B’ bricks straight or curved in plan with 1:6 cement mortar.Complete all as specified and directed. 11 Stone Masonry : Walling of Squared Rubble regular coursed Stonemasonry, well bonded, bedded and solidly hearted built in with 1:6 cement mortar, Complete in all respects as specified and directed. 12 Damp proof course to horizontal or vertical surfaces In cement concrete 1:2:4, type B-0, 40 mm thickincluding necessary formwork . 13 Flush Pointing with 1:4 cement mortar to square rubble, coursed, well bonded and solidly hearted built in cement mortar as directed. 14 Vitrified tiles : Supply and laying of Light shade vitrified tiles 10 mm thick (Square/Rectangle) polished , area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Floor tile finishglossy/mat/ antiskid will be as decided by EIC. Complete all as specified and directed . Make : Johnson, Orient bell, AGL as approved by EIC. 15 GRANITE : S&F Granite 25 mm thk (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed. 16 FLOOR TILING :Supply & fixing Coloured non skid ceramic tiles in flooring, 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell 17 SCREED BED : Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6. Complete all as specified and directed. 18 Plastering : Rendering of 10mm thick plastering with 1:6 cement mortar on fair faces of brick work or concrete surfaces. Complete in all respects as specified and directed. 19 Rounding to edges of stone slabs / granite one edge,such as in steps, cooking platform, and other similar situations. Complete all as specified and directed. 20 Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc. complete as directed by EIC. 21 Taking down wooden wall panelling of any description and similar work as directed. 22 Snap grid : Supply and fixing of 605x605 mm snap gridGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners withand including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediatechannel with connecting clips across the intermediatechannel at 457 mm centre to centre. Complete all as specifiedand directed, Make : Armstrong 23 Supply and fixing of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. 24 POP ceiling : Providing 10 mm thick plaster of Paris(gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mmwith 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately). Complete all as specifiedand directed, Make : Armstrong 25 Ceiling board : (M&L) S&F Exposed metal frame ceiling with calcium silicate boardof siliceous and calcareous material reinforced with cellulose fibre / PVC laminated gypsum tiles with MPL film on rear side, 8 mm thk.for fixing in 600 mm x 600mm grid,Make: Gyproc/ La gyp 26 Door shutter repair : Taking down door shutter of any description exc. 1 sqm and not exc. 2 sqmand repairing and adjusting to the required size including fixing builders hard ware and refixing to the same opening. complete all as specified and directed. 27 Dismantlingof structural steel work including doors, gates, but excluding framed truss etc. Complete all as specified directed. 28 UPVC window / Ventelator : Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension . Complete all as specified and directed. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, 29 UPVC window : Three track three panels sliding window with fly proofS.S wire mesh (Two nos. glazed & one no. wire meshpanels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Areaof window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity tobe 40 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drillingof holes for fixing hardwares and drainage of wateretc. After fixing frame the gap between frame andadjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required sizeand of approved quality, complete all as specified anddirected by Engineer-in-Charge. 30 UPVC door : Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proofS.S. wire mesh (Two nos. glazed & one no. wire meshpanels) made of (big series) frame 116 x 45 mm & sash46 x 82 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead/ double glazingbead of appropriate dimension. (Area of door above2.00 sqm upto 5.00 sqm) comprising of uPVCchambered frame, with in-built roller track and sashextruded profiles duly reinforced with 1.60 + 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionuPVC extruded glazing beads, uPVC extrudedinterlock and uPVC extruded Inline sash adaptor (ifrequired), EPDM gasket, wool pile, zinc alloy (whitepowder coated) handle with key on one side of extremepanels along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zincalloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustabledouble nylon rollers (weight bearing capacity to be120 kg), G.I fastener 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, including drilling ofholes for fixing hardwares and drainage of water etc.After fixing frame the gap between frame and adjacentfinished wall shall be filled with weather proof siliconsealent over backer rod of required size and ofapproved quality, complete all as specified anddirectd. 31 steel wire cloth : Supplying and Fixing in repairs stainless steel wire cloth0.36mm nominal dia.(Guage 28) of wire and width of aperture 1.4mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed 32 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.0 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 33 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.8 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 34 Wooden Wall panelling : S & F of Prelaminated particle board18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. Complete as specified and directed at site. 35 Wooden panelling frame work : S&F of battens frame work using wooden clean sawn 2nd class soft wood battens of cross sectional area exc. 15 & not exc. 25 sq.cm at a spacing of 35 centres. Complete as specified and directed at site. 36 PCC paving : PCC 1:4:8 in floors/ pavingoftype D-2, 1:4:8 with 40mm graded aggregate,100 mm thick.Complete all as specified and directed. 37 Earth work in excavation in all kind of soils by mechanical means (Hydraulic excavator) means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge 38 Soling (or sub base) of spread thickness 150 mm with broken boulders or quarried stone, inter sticesfilled, surface formed and rolled and consolidated torequired gradient and camber. Complete all as specified and directed. 39 Hard core with broken stone/boulders of gauge not exc. 63mm, deposited, spread leveled in layers not exceeding 15 cm thick, and watered consolidated to required gradient & camber including watering. Complete all as specified and directed. 40 Moorum filling in floors or pavings laid in layers not exe. 15cm thick , spread leveled and rammed including watering. Complete all as specified and directed 41 Stone sett flooring (M&L) with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 42 Edge stones to flooring (M&L) with stone setts of size 250 to 300mm long x l50 to 200mm wide, and 450mm deep and and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 43 PCC paving : PCC 1:2:4 in floors/ pavingoftype B-2, with 40mm graded aggregate, 100 mm thick. Including finishing concrete surface even and smooth surface without using extra cement.Complete all as specified and directed. 44 Wearproof topping 20 mm thick using CC 1:2:4, as specified incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner). Complete all as specified and directed. 45 Supply of metalic floor hardener 46 Surface excavation not exceeding 30 cm deepand averaging 20 cm deep in hard / dense soil and getting out. Complete all as specified and directed 47 PCC FLOORING : Cement concrete of 100 mm thickness in floors, sub-floors, sub-bases, pavings etc. oftype B-1, 1:2:4 (20 mm graded aggregate) 48 Smoth finish : Finishing cement concrete surface even and smooth using extra cement. 49 CC Paver blocks : S&F of Machine pressed precastconcrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement & pigment (Coloured)Complete all as specified and directed. 50 CC chequered tiles :S&F of cement concrete chequered tiles with grey pigment cement and pigments(Coloured tiles) for pavements. size of tile 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors.Complete all as specified and directed. 51 PCC paving : PCC 1:3:6 in floors/ pavingof type C-2, with 40mm graded aggregate, 100 mm thick.Complete all as specified and directed. 52 Forming 12mm thick Expansion joints for 100 thick slabsfilled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A. ’ Complete all as specified and directed. 53 Structural steel (S&F) : Structural steel work confirming to Fe-410 W (Gde-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, including application of one coat of Zinc chromate primer paint .Make:TATA, Jindal 54 Structural steel (S&F) : Structural steel work Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Steel confirming to Fe410W (Gde E-250 quality A). Make : TATA, Jindal, Complete all as specified directed. 55 Structural steel (S&F) : Mild steel bolts. purpose made. of dia. of neck n.exc. 12 mm with hexagonal orsquare head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long. Complete all as specified directed. 56 Roofing sheet : Supply and fixing of pre painted galvalume aluminium zinc coating GI basedcorrugated/ trapezoidal profile roofing sheets of thickness 0.5 mm having tensile strength of 550Mpa as in roof covering / cladding to wall with self tapping screws etc. Make : TATA / Jindal /Essar. Complete all as specified and directed. 57 Supply only of liquid water proofing compound for incorporating concrete.Make. Fosrac, BASF, SIKA 58 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating. complete as specified and directed. 59 Kerb stone : Providing precast cement concrete using Type-B1, 1:2:4 20 mm graded aggregatein window or doorcills, lintels, bressumers, steps, quoin blocks (for use with ma- sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets,etc. with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4. Complete with joints to match . Complete all as specified and directed. 60 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in roofkerbs or mud stops, rounded orchamfered on edges.complete as specified and directed. 61 PCC : Plain Cement Concrete (1:2:4) Type B2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed . 62 RCC : Reinforced cement concrete (Type B1, 1:2:4 with 20 mm aggregates) in columns, pillars, piers, posts etc. Complete all as specified and directed. 63 REINFORCEMENT : Mild steel(TMT) bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed. . 64 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 100 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 65 SWG PIPE : Supply & fixing of 100 mm dia Salt Glazed Stoneware drain pipes Grade A, including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 66 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 150 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 67 SWG PIPE : Supply & fixing of 150 mm dia Salt Glazed Stoneware drain pipeslaid in trenches including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 68 Earth work in excavation of all kind of soils by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Complete all as specified and directed . 69 Returning, filling in of excavated soils, including spreading, levelling, watering and well ramming in layersnot exc 25 cm. 70 PVC PIPE : Supply and Fixing of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid or fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 71 PVC PIPE : Supply and Fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 72 Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit iring, etc., and making good, cutting not exc 10 cm girth. Complete all as specified and directed. 73 Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat surfaces. Complete all as specified and directed. 74 S & F ofG.I. Tubes of Size 40 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 75 S & F ofG.I. Tubes of Size 25 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 76 S & F ofG.I. Tubes of Size 1/2‘’(15 mm), medium grade including all fittings to walls and ceilings or in floors/trenches. 77 Supply & Fixing Rotational moulded polyethylene water storage tanks (PVC cylindrical vertical with closed top) hoisted and fixed in position 1000 lit capacity. make : Syntex 78 BALL VALVES : 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed. 79 NAHANI TRAPS : Supply & Fixing ofCI Nahani traps 100mm with grating including jointing to went pipe with CC 1:2:4complete all as specified and directed at site. 80 GULLY TRAP : M&L for PVC/SWR gully traps, of size 125 mm x 110 mm all as directed and specified. 81 GRATING : Supply and fixing of grating doom 100 mm dia. of PTMT (min. weight 25 gms) 82 PVC D/E PIPE CONNECTION :Supply and fixing of PVC Double End Pipe connection.in repairs, size:15mm with end nuts & washers of length 600 mm. Make : Kohinoor. Complete all as specified and directed. 83 ALUMINIUMPARTITIONS : Supply and fixing complete of anodised aluminium powder coated frames for partition frames and windows etc. all complete as directed by E.I.C. 84 ALUMINIUM WINDOW SHUTTERS : Supply and fixing complete of anodised aluminiumwindow and ventilator shutters powder coated fixed type without sash bar ,aluminium section weighing 0.55 kg/m including necessary jointig cleats, glazing clips, rubber neoprane packing, handles 2 nos. in each door, hinges, anodised aluminiumsnap beading, screws etc. complete all as directed by E.I.C. 85 HINGES : Supply and fixing of extruded Al. alloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-21 of size 125mmincluding all as specified and directed . 86 Antique aldrop : Supply and fixing of 200 mm long Antique model Brass mixed heavy alloy, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.All as specified and directed and as approved by EIC. 87 Brass hinge: Supply and fixing of extruded brassalloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-11 of size 125mmincluding.All as specified and directed and as approved by EIC.. 88 Antique tower bolt : Supply and fixing of Antique model Brass mixed heavy alloy, barrel tower bolts of extruded section of size 200 mm and fixed all as directed.All as specified and directed and as approved by EIC. 89 Antique Door handle : Supply & fixing of Extruded Antique model Brass mixed heavy alloy, cast type polished bright handles 150 mm long, Complete all as specified and directed 90 TOWER BOLT : Supply and fixing of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm and fixed all as directed. 91 BOW HANDLE: Supply & fixing of Extruded aluminium alloy handles 150 mm long, fabricated type, anodised. Complete all as specified and directed 92 Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be easured separately), removing materials to store for keeping in safe custody for reuse at site and making good. 93 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) 94 point wiring:S&F / Drawing of cables in PVC pipe,OneLight point or onefan point controlled by one switch with cables 1.5 sq.mm size of copper conductor cables FR PVC single core sheathed cable 95 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 5 amps independent, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 96 point wiring: S&F /Drawing of cables to One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 97 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 15 amps independent, with cables 4.0 sq.mm size of copper conductor cables FR PVC sheathed. 98 S & F of ceiling rose,3 phase/PVC/Polycorbonate, Isolate body 99 S & F ofswitch modular type of one module, 6 amps 100 S & F ofsocket, 2/3 pin combined, 6 amps, 2 Module 101 S & F ofswitch modular type of one module, 16 amps 102 S & F ofsocket, 2/3 pin combined, 16 amps, 2 Module 103 S & F ofFan step regulator 120 W, 2 Module 104 LED LUMINAIRE :Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/ Halonix 105 S & F of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. 106 S & F of LED tube lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 107 LED Street Light :Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/Halonix.complete all as specified and directed 108 Exhaust Fan: Supplyand Fix Exhaust Fan made of sturdy Engineering plastic complete with Lauvers, Shutteers, voltage 230 V,50 HZ, RPM 1200, Copper winding ofsweep 250mm.complete all as specified and directed. 109 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) 110 Industrial socket plug: Supply and fixing of 240 V, 20 amps, single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB. 111 MCB :Supply and fixing of MCB / Isolator, 240 V, single pole 40 amp 112 MCB :Supply and fixing of MCB / Isolator, 240 V, double pole 40 amp 113 MCB D.B : S & F of Sheet Metal enclousers for D.B ofsingle doorof SPN,8 way with 200A rated bus bar,240V 114 MCCB: Suppply and fixing of MCCB 3 pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA. 115 S & F of Modular metal flush box 6 module 116 S & F of Modular white cover plate with frame 3 module 117 S & F of Modular white cover plate with frame 4 module 118 S & F of Modular white cover plate with frame 6 module 119 S & F of Modular white cover plate with frame 8 module 120 EARTHING : Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead GI strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.complete all as specified and directed 121 Earth continuity conductor : Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm GI strip. complete all as specified and directed 122 Dismantlng ofAsbestos cement (corrugated,semi corrugated, etc.) sheets in roofcoverings. Sheets shall be deposited to stores as directed. 123 Cutting or uprooting grass on old CC/brick tiles or on old mud phuska,and Taking down old Taf felt and loose material from the roof, cleaning the bitumen surface by wire brushing, washing down & disposing the pealed off tar felt muck etc. for complete as directed. removing rubbish off the premises, cleaning surface and preparing to receive new mud plaster. Complete as specified and directed. 124 Surface painting : Removal of old tarfelt sheets,Wire brushing and cleaning top surface of roof tops and surface painting, with a layer of bitumen primer for bitumen membrane @ 0.50 ltr/sqm by the same membrane manufacturere of density at 25° C, 0.87-0.89 Kg/ltr and viscosity 70-160 cps and then left the surface 4 to 8 hours for drying.Complete as specified and directed. 125 Bitumen Tack coat / Seal coat : Applying surface bitumen coat Seal / Tack coatwith lndustrial bitumen 85/25 forwaterproofingtreatments at the rate of 1.2 kg / sqm . 126 Water proofing treatment (M&L) : Rendering water proofing treatment to RCC roof slabs including vertical surfaces with APP based polymetric membrane sheet, minimum 3 kg/sqm and minimum 3.0 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) evenly laid on primed surfaces by forced applicationby torch on treatment. The vital physical and chemical parameters of the membrane shall be : Tensile strength in longitudinal and transverse direction at 23° C as 650/450/5 cm.Tear strength in longitudinal and transverse direction as 300/250 N. Softening point of membrane not less than 150° C. Cold flexibility shall be up to 2° c when tested in accordance with ASTM, D-5147. The laying of membrane shall be done through the authorised applicator of the manufacturer of membrane. Membrane make : STP / Dr. Fixt / IWL as approved by EIC. 127 Carrying and disposal of debris : Removing building materials etc. to a distance of 1.5 KM or under including loading, unloading and stacking at the destination. Complete all as specified and directed at site. 128 Rolling shutter : S&F ofSteel rolling shutters 1.25 mm thickness of lathe, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle. Complete all as specified and directed. 129 Rough excavation notexceeding1.5 m deepin drains etc in loose/soft soils andgetting out 130 Scarifying : Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc.400 sqm and the thickness Exc 50 mm and n.exc 100 mm deep 131 Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 132 Macadam : Premix bituminous, macadam with paving bitumen any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less).Complete all as specified and directed. 133 Pot holes : Repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth,making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadamusing paving bitumen, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings,6.3 mmsizeand again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm.Complete all as specified and directed. 134 Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 135 Applying evenly a priming/tack coat with bituminous primer using paving bitumen at 5kg per 10 sq metre. Complete as specifiedand directed. 136 Bituminous premixed carpet, 2.5 cm consolidated thickness, with 0.34 cu.m. of stone chippings mixed with 18.25 kg of binder (paving bitumen)per 10 sq.m and mixed in mechanical hot mix plant and laid with mechanical paver and rolled using power roller 8-10 T capacity and compacted to required camber and gradient to uniform smooth surface. Complete as specifiedand directed. 137 Supply and fixing of Machine cut cudappah stoneslab 20-25mm thick over cementscreed base, laid and jointedwith grey cement slurry mixedwith pigment to match the shadeof the slab including rubbingand polishing complete. 138 Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint and application of priming paint plaster coat. 139 Rendering synthetic enamel painting on new Steel surfacesof any description over 10 cm width or girth- TWO coats including one coat of red oxide Zinc chrome paint. Make: Asian paints/Berger 140 Complete removal existing treatment of of white washing onsurfaces of walls/ concrete. 141 Complete removal existing treatment of of white washing on surfaces of ceilings. 142 CHALK WHITENING : M&L - Chalk whitening (white cement-based, water-resistant, white wall putty) of plastered surfaces as preparatory to distempering on wall surfaces, Make : Birla wall care, complete all as specified & directed. 143 PRIMER : Priming plastered and other surfaces with alkali resistant priming paint. Make : Asion/Dulux- all as specified and directed . 144 WHITEWASH ON CEILINGS : M&L - White washing on ceilings- on old decorated surfaces- including preparation of surfaces – ONE coat of White Wash-complete all as directed. 145 WHITEWASH ON WALLS : M&L - White washing on Walls – on old decorated surfaces- including preparation of surfaces - TWO coats of White wash - complete all as directed. 146 PLASTIC EMULSION PAINT:Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint-complete all as directed. Make: Asian -Apcolite / Dulux-promise. 147 OBD : M&L - Rendering Oil Bound Distempering on old surfaces -including preparation of surfaces on walls - TWO Coats of OBD - complete all as directed. Make : Asian-tractor Uno / Berger-Butterfly / Indigo-gold. 148 External weather proof painting on walls : Material & Labour for applying Two or more coats of 100% Premium acrylic weather proof emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces. all as specified and directed, Brand : Asian apex,Berger weather shield, Nerolac Rain coat. 149 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting onOld painted Steel surfaces- surfaces of any description over 10 cm width or girth including preparation of surfaces-TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 150 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on Old painted Steel surfaces- surfaces of any description n.exc 10 cm width or girth including preparation of surfaces- TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 151 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on wooden surfaces - old surfaces of any description over 10 cm width or girth including preparation of surface - TWOCoats- all as specified and directed-Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 152 FRENCH POLISHING : French polishing on old surfaces of any description, width or girth –including cleaning and preparing the surface- One or more coats. all as specified and directed. Make : Sheenlac, sealer 153 Supply and fixing of Safety lever locks mild steel with 4 levers for rolling shutters as directed. 154 Fan Hook: Supply and Fixing of Fan hook with double anchor bolt complete fixing as per instructions of EIC. 155 IWC : IWC of approved make fixed with P trap Make: Hindware/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 156 CONCEALED FLUSHING SYSTEM : Wall mounted concealed flushing system (including frame, control plate and installation kit) with dual flush mode of capacity 10 ltrs. Make: Jaquar(Solo)/ Parryware(Prime)/ Cera(Fountain). Complete all as specified and directed. 157 MIRROR : Mirror 5 mm thk. with bevelled edge fixed with concealed screws Make: Saint Gobain/ Nilkamal/ Casa Gold. Complete all as specified and directed. 158 Switch board box with frame plate and cover plate , metal flush box18 module: Supply and Fixing of covering plates with Metal Flush box andcover plate frames of 18 module of make Legrand/ Schneider/ Havellscomplete all as specified by the EIC 159 Concertina coil & 6 straight RBT strands : Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina cross type fencing, GI steel plate & GI core wireon wall top using concertina coils stretched to approx.6 meters length at site and clipped with three nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as C clips, R.B.T clips etc.). Including additional three horizontal R.B.T strands to be fixed with vertical portion of MS angle supports as directed in site. Complete all as specified and directed at site. 160 Accoustic sheets : supply and fixing of choice colourPolyester Fiber Acoustic Board / tiles, Thickness: 12mm, for insula-tion and accoustic purposes, 60x60 cm in size, fixed to wall / ceiling surfaces on snap grid orwith nails to timber frame work or with Z bar/clips etc as specified by manufacturer.Complete all as specified and directed. 161 Floor mat: supply and fixing of choice colourNylon carpet for floors minimum 6 mm thicknesshaving better accoustic co-efficient ,fixed to floor with approved adhesiveas specified by manufacturer.Complete all as specified and directed. 162 ACP wall lining : Supply and fixing of decorative choice colour solid finished Aluminum composit panel 4.0 mm thick sheeting on external wall surfaces upto 12.0 mter heights fixed over aluminium/MS framed wall surfaces as specified by manufacturer. Cost includes ACP panel, frame work, jointing glue and scafolding etc. Complete all as specified and directed. 163 UPVC window (Single glazed panel shutter & fixed wire mesh panel): Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series)frame 47 x 50 mm & sash 47 x 68 mm both havingwall thickness of 1.9 ± 0.2 mm and single glass paneglazing bead of appropriate dimension (Area ofwindow upto 0.75 sqm.) comprising of uPVC multi-chambered frame, sash and mullion (where everrequired) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel sectionmade from roll forming process of required length(shape & size according to uPVC profile), uPVCextruded glazing beads of appropriate dimension,EPDM gasket, stainless steel (SS 304 grade) frictionhinges, zinc alloy (white powder coated) casementhandles, G.I. fasteners 100 x 8 mm size for fixingframe to finished wall, plastic packers, plastic capsand necessary stainless steel screws etc. Including SS wire mesh panel with aluminium beeding fixed to outer face window using adjustable /removable clips. Profile offrame & sash shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be alsofusion welded including drilling of holes for fixinghardwares and drainage of water etc. After fixingframe the gap between frame and adjacent finishedwall shall be filled with weather proof siliconsealant over backer rod of required size and ofapproved quality, complete all as specified anddirected by Engineer-in-Charge. 164 WALL TILES : Supply & fixing of Coloured digital glazed ceramic tiles in vertical surface 300x600 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell. 165 PVC door frame : S & F of solid WPVC Door Frame of size 100x60 mm heavy density of 11100 kg/cum and high quality PVC laminated of choice colour. Complete all specified and directed. 166 PVC door shutter : S & F of Factory Made Solid WPVCDoor Shutter with wood free EPS, 32 mm thick, heavy density 700 kg/cum and high quality PVC laminated on both side of choice colour. 167 Staircase railing : Supply and fixing of designed Stainless steel hand railing not less than 0.8 mtr height for stairs, balconies etc. using SS grade 304/316 members for balusters & rails etc. and covered with 12 mm thick tampered toughned glass. Design & model shall be as decided by EIC. Cost inclusive of glass, design and other mountings. Complete all as specified and directed. 168 Handicap grab bar : S&F of stainless steel anti slip vertical swing handicap bath room grab bar/rail with paper holder of min. 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 169 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 170 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 0.45 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 171 Wood Door : Supply and fixing of modern & designer soildTeakwood door shutters for Main Doors 32 mm finished thickness as decided by EIC . 172 EWC : Supply and fixing ofItalian Collection ceramic Floor Mount Western Commode, Rim less, One-piece for Bathrooms with Syphonic vortex Flushing system and soft closing seat cover including connection pipe.Make : Jaquar Fusion, Hindware Fabio, Cera cinova 173 WASH BASIN : Supply and fixing of Under counter Wash basin rectangle of approved make along with waste coupling, waste pipe and connection pipe, brackets etc. Make : Jaquar(Continental)/ Cera(campa)/ Parryware(Aqiline). Complete all as specified and directed. 174 URINAL : Supply and fixing ofSensor Urinal pan of approved make with auto flushing system including connection pipe, waste coupling and waste pipe Make: Jaquar(Aquisense)/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 175 PILLAR COCK : S&F ofsensorbased table top model Pillar cock with auto closing system of make: Jaquar / Hindware/ Cera. Complete all as specified and directed. 176 CONCEALED STOP COCK : S&F of CP Concealed stop cock of make : Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 177 2 WAY ANGLE COCK : S&F ofCP 2 way angle cock Make: Parryware(Uno)/ Cera(Fountain)/ Jaquar(Solo). Complete all as specified and directed. 178 EWC JET FAUCET : S&F of EWC jet faucet of make: Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 179 BIB COCK : S&F ofCP Bib cock of make: Jaquar(Solo)/Parrywaare(Uno)/ Cera(Fountain). Complete all as specified and directed. 180 SOAP DISH : S&F of SS soap dish of make Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 181 Hand drier: Supply and fixing of plastic Automatic Hot air drierfor bath rooms of approved make. Make :Orchid / Dolphy / Bajaj. Complete all as specified and directed. 182 Liquid soap dispensar: Supply and fixing of Liquid soap dispensar for bath rooms of approved make. Make :Jaquar / Orchid / Dolphy. Complete all as specified and directed. 183 Toilet paper holder: Supply and fixing of stainless steel single toilet paper roll holder of approved make. Make :Jaquar continental / Parryware sigma/ Cera Icon. Complete all as specified and directed. 184 Urinal partition : Supply and fixing of HPL (High-Pressure Laminate) urinal partitions using 12 mm thick compact board of width 400 to 500 mm and height 1200 mm of approved make and fixing with stainless steel brackts. Complete all as specified and directed. 185 Bldg.Expansion joint : Preparation of joint by grinding of groove surfae, remoal of dust, providing polymer mixed cement mortar on both sidea of groove and crack filling if any in floor level, fixing of baker rod 25x25 mm to control depth of groove, Providing and applying Nitoseal PU50 of Fosroc or equivalant having MAF 25% or above to the groove 25x12 mm. Including fixing / covering of joint with APP based polymetric membrane sheet sufficient width. Complete all as specified and directed at site. 186 Forming V grooves on granite surfacesn,exc 10mmdeep and n exc 10mm on face in steps, cooking platform, and other similar situations etc. 187 Hiring / Engage of JCB for cleaning, moving and loading materials like sand, gravel, or demolitionand removal of debris and other miscellaneous purposes as directd. The rate includes diesel and driver required to run the vehicle. 188 Carpet grass : Supplly and laying of carpet grass on levelled soil surface including preparing the soil bedby loosning the base ground 100 mm thick and removing old unwanted grass if any and necessary watering as directed. 189 Supply and laying of red earth / soil in loose state which is free from debris, grass and other vegitation to be used for gardening purposes as directed. 190 Architectural design : Before commencement of work Contractor should take architectural consultancy servies for entrance arch at the entrance gate, building front elevations and garden designs by authorised institutions / authorised Designer. Complete all as directed by EIC
Contract Date: May 16, 2026 Contract Value : 3.98 Crore
Government Departments No of Bidders 4
8.
Defence #10826109 Price Bid
Supply Of Op Works Store - 1.00 Aggregate 20Mm. Stone Aggregate To Be Crushed Rock Or Gravel 20Mm Graded Confirming To Is 383-1970 1.01 Uri 1.02 Naugam 1.03 Rampur 1.04 Ziran 1.05 Baramulla 1.06 Pattan 2.00 Aggregate 40Mm. Stone Aggregate To Be Crushed Rock Or Gravel 40Mm Graded Confirming To Is 383-1970 2.01 Uri 2.02 Rampur 2.03 Ziran 2.04 Baramulla 2.05 Pattan 3.00 Aggregate 63 Mm. Stone Aggregate To Be Crushed Rock Or Gravel 63Mm Graded Confirming To Is 383-1970 3.01 Uri 3.02 Rampur 3.03 Pattan 4.00 Common Building Burnt Clay Bricks Sub Class B Of Size 23Cm X 11.5Cm X 7.5Cm With Sharp Corners, Conforming To Is 1077 -1986 ( Fourth Revision ) . Designation 75 Kgf / Sqcm 4.01 Uri 4.02 Naugam 4.03 Rampur 4.04 Ziran 4.05 Baramulla 4.06 Pattan 5.00 Natural Sand Confirming To Is 383-1970 ( Specifications For Coarse And Fine Aggregates. Free From Adherent Coating, Hard, Durable, Clean And Shall Not Contain Clay And Impurities Such Iron Pyrites, Alkalies, Salt, Coal, Mica, Shale Or Similar Laminates Or Other Materials Exceeding The Specified Limits In Is Code Aggregates For Concrete. 5.01 Uri 5.02 Naugam 5.03 Rampur 5.04 Ziran 5.05 Baramulla 5.06 Pattan 6.00 Load Bearing Concrete Hollow Blocks Of Size 400Mm X 200 Mm X 200 Mm Casted In Design Mix 1:2:4 To Have A Strength Of M10 To M15. 6.01 Uri 6.02 Naugam 6.03 Rampur 6.04 Ziran 6.05 Baramulla 6.06 Pattan 7.00 Ldpe Sheet Having Weight 100Gm / Sqm Conforming To Is 2508 : 1984 7.01 Uri 7.02 Naugam 7.03 Rampur 7.04 Ziran 7.05 Baramulla 7.06 Pattan 8.00 Acrylic Sheet 4X3x3mm 8.01 Uri 8.02 Naugam 8.03 Rampur 8.04 Ziran 8.05 Baramulla 8.06 Pattan 9.00 Acrylic Sheet 6X4x4mm 9.01 Uri 9.02 Naugam 9.03 Rampur 9.04 Ziran 9.05 Baramulla 9.06 Pattan 10.00 Flexible Wire Pvc Twin Core Twisted 10.01 Uri 10.02 Naugam 10.03 Ziran 10.04 Baramulla 10.05 Pattan 11.00 Hdpe Sand Bag Laminated Of Size 75 X 40 Cm, Sand Colour And Each Bag Having Weight Not Less Than 60 Gms. 11.01 Uri 11.02 Naugam 11.03 Rampur 11.04 Ziran 11.05 Baramulla 11.06 Pattan 12.00 Pbs Roll Self Finished Felt Hessian Base ( For Water Proofing ) Grade I Conforming To Is- 1322-1982 Of Size 20M X 0.90M ( Weight Of Each Roll Shall Not Be Less Than 42.50 Kgs + 2.5 Kgs In Dry Conditions ) . 12.01 Uri 12.02 Naugam 12.03 Rampur 12.04 Ziran 12.05 Baramulla 12.06 Pattan 13.00 Sealing Compound 13.01 Naugam 13.02 Rampur 13.03 Ziran 13.04 Pattan 14.00 Water Proofing Compound 14.01 Uri 14.02 Naugam 14.03 Rampur 14.04 Ziran 14.06 Pattan 15.00 Wooden Scantling Size 2 X 3 X 10 Long 15.01 Rampur 15.02 Ziran 15.03 Pattan 16.00 Supply Of Class 1 Double Twisted, Zinc Coated Ms Gabion Boxes Of Size 3M X 1M X 1M Having Following Specifications :- ( A ) Mesh Size - 80 X 100 Mm ( B ) Number Of Diaphragms - 02 Nos ( C ) Mesh Wire Size - 2.40 Mm ( D ) Mesh Wire Dia – 3.00 Mm ( E ) Edge / Selvedge Dia – 3.90 Mm ( F ) Lacing Wire Dia – 2.20Mm ( G ) Minimum Qty Of Lacing Wire – 3% Of Total Weight Of Gabion Basket Supplied. 16.01 Uri 16.02 Naugam 16.03 Rampur 16.04 Ziran 16.05 Baramulla 16.06 Pattan 17.00 Cable Pvc 1.5 Sqmm Single Core With Copper Conductor 17.01 Uri 17.02 Naugam 17.03 Rampur 17.04 Ziran 17.05 Pattan 18.00 Cable Pvc Insulated Twin Core With Aluminium Conductor 2.5 Sqmm 18.01 Uri 18.02 Naugam 18.03 Baramulla 18.04 Pattan 19.00 Cable Pvc Insulated Twin Core With Aluminium Conductor 1.5 Sqmm 19.01 Uri 19.02 Naugam 19.03 Rampur 19.04 Ziran 19.05 Baramulla 19.06 Pattan 20.00 Pvc Insulated Cable 2.5 Sqmm Copper Conductor Single Core 20.01 Uri 20.02 Naugam 20.03 Rampur 20.04 Ziran 21.00 Xlpe Insulated Pvc Seathed ( Heavy Duty ) 4 Core 25 Sq Mm 21.01 Uri 21.02 Naugam 21.03 Rampur 21.04 Baramulla 21.05 Pattan 22.00 Led Street Light 60 Watt 22.01 Uri 22.02 Naugam 22.03 Rampur 22.04 Ziran 22.05 Pattan 23.00 Led Street Light 36 Watt 23.01 Rampur 23.02 Baramulla 23.03 Pattan 24.00 Hdpe Pipe 25 Mm 24.01 Uri 24.02 Naugam 24.03 Rampur 24.04 Ziran 24.05 Pattan 25.00 Glass Putty 25.01 Uri 25.02 Naugam 25.03 Rampur 25.04 Ziran 25.05 Pattan 26.00 Tube Light Rod 36 / 40 Watt 4 Ft Long 26.01 Uri 26.02 Naugam 26.03 Rampur 26.04 Ziran 26.05 Pattan 27.00 Tube Light Rod 20 Watt 2 Ft Long 27.01 Uri 27.02 Naugam 27.03 Rampur 27.04 Ziran 27.05 Pattan 28.00 Plug Top 3 Pin 5 Amp 28.01 Uri 28.02 Naugam 28.03 Rampur 28.04 Ziran 28.05 Pattan 29.00 Plug Top 3 Pin 15 Amp 29.01 Uri 29.02 Naugam 29.03 Rampur 29.04 Ziran 29.05 Pattan 30.00 Switch Socket Combination 2 In 1, 6 Amps, With Box 30.01 Uri 30.02 Naugam 30.03 Rampur 30.04 Ziran 31.00 Switch Socket Combination 2 In 1, 16 Amps, With Box 31.01 Uri 31.02 Naugam 32.00 Mcb Single Pole 230V Ac, 50 Hz, 16 Amps, 10Ka 32.01 Uri 32.02 Naugam 32.03 Ziran 32.04 Pattan 33.00 Mcb Single Pole 230V Ac, 50 Hz, 6 Amps, 10Ka 33.01 Uri 33.02 Naugam 33.03 Rampur 33.04 Ziran 33.05 Pattan 34.00 Mcb 16 Amps, Double Pole 240 Volt 34.01 Uri 34.02 Naugam 34.03 Rampur 34.04 Ziran 35.00 Switch Piano Type 15 Amps One Way 35.01 Uri 35.02 Naugam 35.03 Rampur 35.04 Ziran 36.00 Pvc Long Bend For Cistern Tank. 36.01 Uri 36.02 Rampur 36.03 Ziran 37.00 Pvc L Bend 20Mm Dia 37.01 Uri 37.02 Naugam 37.03 Rampur 37.04 Ziran 38.00 Pvc L Bend 25 Mm Dia 38.01 Uri 38.02 Naugam 38.03 Rampur 38.04 Ziran 38.05 Pattan 39.00 Compact Fluorescent ( Cfl ) 15 Watts 39.01 Uri 39.02 Naugam 39.03 Rampur 39.04 Ziran 40.00 T / W Switch Board 8”X10” 40.01 Uri 40.02 Naugam 40.03 Rampur 40.04 Ziran 40.05 Baramulla 40.06 Pattan 41.00 T / W Switch Board 7”X4” 41.01 Uri 41.02 Naugam 41.03 Ziran 41.04 Baramulla 41.05 Pattan 42.00 Bakelite Sheet 9”X11” 42.01 Uri 42.02 Naugam 42.03 Rampur 42.04 Ziran 42.05 Pattan 43.00 Change Over Switch 16 Amp Two Pole 240 Volt 43.01 Uri 43.02 Naugam 43.03 Rampur 43.04 Ziran 43.05 Pattan 44.00 Main Switch 32 Amps Two Pole 240 Volt 44.01 Uri 44.02 Naugam 44.03 Rampur 44.04 Ziran 44.05 Pattan 45.00 Main Switch 16 Amps 45.01 Uri 45.02 Naugam 45.03 Rampur 45.04 Ziran 46.00 Mcb Distribution Boards In Sheet Metal Enclosure 4 Ways 46.01 Uri 46.02 Naugam 47.00 Mcb Distribution Boards 8 Ways Double Door 47.01 Uri 47.02 Naugam 47.03 Rampur 47.04 Ziran 47.05 Baramulla 47.06 Pattan 48.00 Composite Multi Layer Pipe With Aluminium Core Of Size Inner Dia 25Mm And Outer Dia 32Mm 48.01 Uri 48.02 Naugam 48.03 Rampur 49.00 Rotational Moulded Polyethylene Water Storage Tank Double Layer ( Cylindrical Vertical Tank ) As Per Is 12701 Of 1996 . 200 Ltr Capacity 49.01 Uri 49.02 Naugam 49.03 Rampur 49.04 Ziran 49.05 Pattan 50.00 Rotational Moulded Polyethylene Water Storage Tank Double Layer ( Cylindrical Vertical Tank ) As Per Is 12701 Of 1996 . 500 Ltr Capacity 50.01 Uri 50.02 Naugam 50.03 Rampur 50.04 Ziran 50.05 Baramulla 50.06 Pattan 51.00 Rotational Moulded Polyethylene Water Storage Tank Double Layer ( Cylindrical Vertical Tank ) As Per Is 12701 Of 1996 . 1000 Ltr Capacity 51.01 Uri 51.02 Naugam 51.03 Rampur 51.04 Baramulla 51.05 Pattan 52.00 Rotational Moulded Polyethylene Water Storage Tank Double Layer ( Cylindrical Vertical Tank ) As Per Is 12701 Of 1996 . 2000 Ltr Capacity 52.01 Uri 52.02 Naugam 52.03 Rampur 52.04 Ziran 52.05 Pattan 53.00 Vitreous Indian Type Wc 53.01 Uri 53.02 Naugam 53.03 Rampur 53.04 Ziran 53.05 Pattan 54.00 Vitreous European Type Wc 54.01 Uri 54.02 Naugam 54.03 Rampur 54.04 Ziran 55.00 Low Level Flushing Cistern 10 Ltr 55.01 Uri 55.02 Rampur 55.03 Ziran 56.00 Gi Union 15Mm 56.01 Uri 56.02 Naugam 56.03 Rampur 56.04 Ziran 57.00 Gi Union 20Mm Conforming To Is Make Unik / Ship / Svw 57.01 Uri 57.02 Naugam 57.03 Rampur 57.04 Ziran 58.00 Pvc Pipe 110 Mm Dia 3 Mtr Long 58.01 Uri 58.02 Naugam 58.03 Rampur 58.04 Ziran 59.00 Ms Binding Wire ( Annealed ) Not Less Than 0.9 Dia 59.01 Uri 59.02 Naugam 59.03 Rampur 59.04 Ziran 59.05 Baramulla 59.06 Pattan 60.00 Synthetic Enamel Paint Red / Green / White / Black / Yellow 60.01 Uri 60.02 Naugam 60.03 Rampur 60.04 Ziran 60.05 Baramulla 60.06 Pattan 61.00 Rapidite Quick Setting Liquid 61.01 Uri 61.02 Naugam 61.03 Rampur 61.04 Ziran 61.05 Baramulla 61.06 Pattan 62.00 Gi Pipe 20Mm Dia, Med Grade 62.01 Uri 62.02 Rampur 62.03 Ziran 62.04 Pattan 63.00 Gi Pipe 15Mm Dia, Med Grade 63.01 Uri 63.02 Pattan 64.00 Gi Elbow 20Mm 64.01 Uri 64.02 Rampur 64.03 Ziran 64.04 Pattan 65.00 Gi Elbow 15Mm 65.01 Uri 65.02 Pattan 66.00 Gi Socket 20Mm 66.01 Uri 66.02 Rampur 66.03 Ziran 66.04 Pattan 67.00 Gi Socket 15Mm 67.01 Uri 67.02 Pattan 68.00 Gi Reducer Tee 20 / 15Mm 68.01 Uri 68.02 Rampur 68.03 Ziran 68.04 Pattan 69.00 Gi Tee 20Mm 69.01 Uri 69.02 Naugam 69.03 Rampur 69.04 Ziran 69.05 Pattan 70.00 Gi Tee 15Mm 70.01 Uri 70.02 Pattan 71.00 Gi Nipple 15 Mm 3 71.01 Uri 71.02 Pattan 72.00 Gi Nipple 15 Mm 4 72.01 Uri 72.02 Pattan 73.00 Gi Plug 20Mm 73.01 Uri 73.02 Rampur 73.03 Ziran 74.00 Gi Reducer Socket 20 / 15Mm 74.01 Uri 74.02 Rampur 74.03 Ziran 75.00 Brass Stop Cock 20Mm 75.01 Uri 75.02 Rampur 75.03 Ziran 75.04 Pattan 76.00 Brass Bib Cock 15Mm 76.01 Uri 76.02 Pattan 77.00 White Cement ( 1 Kg Pack ) 77.01 Uri 77.02 Naugam 77.03 Rampur 77.04 Ziran 77.05 Pattan 78.00 Water Proofing Silica Panels Of Size 300X300mm X 7 To 8 Mm Thick 78.01 Uri 78.02 Naugam 78.03 Rampur 78.04 Ziran 78.05 Baramulla 79.00 Water Proofing Silica Panels Of Size 400X400mm X 7 To 8 Mm Thick 79.01 Uri 79.02 Naugam 79.03 Rampur 79.04 Ziran 79.05 Pattan 80.00 Ply Wood 8X4x12mm Thick, Isi Marked. 80.01 Uri 80.02 Naugam 80.03 Rampur 80.04 Ziran 80.05 Pattan 81.00 Thinner 81.01 Uri 81.02 Naugam 81.03 Rampur 81.04 Ziran 81.05 Pattan 82.00 M Seal 100 Gm Each Pkt 82.01 Uri 82.02 Naugam 82.03 Rampur 82.04 Ziran 82.05 Pattan 83.00 Charcoal Without Dust Best Quality 83.01 Uri 83.02 Naugam 83.03 Rampur 83.04 Ziran 83.05 Pattan 84.00 Rootout / Glyphosate 71% Sg ( Glyfos Dakar ) 84.01 Uri 84.02 Naugam 84.03 Ziran 84.04 Pattan 85.00 Oil Bound Distemper 85.01 Uri 85.02 Naugam 85.03 Rampur 85.04 Ziran 85.05 Pattan 86.00 Mcb 63 Amp 4 Pole 10Ka 86.01 Naugam 86.02 Rampur 86.03 Ziran 86.04 Pattan 87.00 Mcb 32 Amp 3 Pole 10Ka 87.01 Uri 87.02 Naugam 87.03 Rampur 87.04 Ziran 87.05 Pattan 88.00 Waste Pipe 32 Mm Dia With Coupling 88.01 Uri 88.02 Naugam 88.03 Rampur 88.04 Ziran 89.00 Suction Pipe ( 32Mm Dia ) 89.01 Rampur 89.02 Ziran 90.00 Extension Cord Heavy Duty, Isi Marked 90.01 Naugam 90.02 Rampur 90.03 Ziran 91.00 Hinges 2 91.01 Uri 91.02 Naugam 92.00 Hinges 5 92.01 Uri 92.02 Naugam 92.03 Rampur 92.04 Ziran 93.00 Pgi Sheet 3X7x1 Mm 93.01 Uri 93.02 Naugam 93.03 Rampur 94.00 Bed Switch 6 Amp , Isi Marked 94.01 Uri 94.02 Naugam 94.03 Rampur 94.04 Ziran 95.00 Hacksaw Blade Double End 95.01 Naugam 95.02 Rampur 95.03 Ziran 95.04 Pattan 96.00 Welding Rod 96.01 Uri 96.02 Naugam 96.03 Rampur 96.04 Pattan 97.00 Led Bulb 8 / 10W, Isi Marked 97.01 Uri 97.02 Naugam 97.03 Rampur 97.04 Ziran 97.05 Pattan 98.00 Led Bulb 3 / 5W, Isi Marked 98.01 Uri 98.02 Naugam 98.03 Ziran 98.04 Pattan 99.00 Led Bulb 25W, Isi Marked 99.01 Uri 99.02 Naugam 99.03 Pattan 100.00 Led Bulb 50W, Isi Marked 100.01 Uri 100.02 Naugam 100.03 Pattan 101.00 Nails 2 / 3 / 4 / 6 101.01 Uri 101.02 Naugam 101.03 Rampur 101.04 Ziran 101.05 Baramulla 101.06 Pattan 102.00 Tuch Wood, Isi Marked. 102.01 Pattan 103.00 Ply Wood Teak ( 6 Mm ) 4X8 103.01 Pattan 104.00 Taping Screw 1 / 2 / 3 104.01 Uri 104.02 Naugam 104.03 Ziran 104.04 Pattan 105.00 Ply Wood 8X4x6mm, Isi Marked 105.01 Uri 105.02 Pattan 106.00 Ply Wood 8X4x9mm, Isi Marked 106.01 Uri 107.00 Composite Multi Layer Pipe 20 Mm 107.01 Uri 108.00 Led Tube Light 20W Complete Set , Isi Marked 108.01 Uri 108.02 Naugam 108.03 Ziran 108.04 Baramulla 108.05 Pattan 109.00 Nylon Rope 20Mm 109.01 Uri 109.02 Naugam 110.00 Wss Joint Nipple Dia1 110.01 Uri 111.00 Wss Pump 6 Hp Fan Belt ( 54A ) 111.01 Uri 112.00 Wss Pump 6 Hp Fan Belt ( 63A ) 112.01 Uri 113.00 Change Over Switch 100 Kva, Isi Marked 113.01 Uri 114.00 Change Over Switch 63 Kva, Isi Marked 114.01 Uri 115.00 Change Over Switch 32 Kva, Isi Marked 115.01 Uri 115.02 Pattan 116.00 Ply Wood 8’ X4’ X 19Mm Water Profing, Isi Marked 116.01 Uri 116.02 Rampur 116.03 Ziran 117.00 Ply Wood 8’ X 4’ X 10Mm, Isi Marked 117.01 Uri 117.02 Naugam 118.00 Ply Wood 8’ X 4’ X 16Mm, Isi Marked 118.01 Uri 119.00 Ply Wood 6’ X 4’ X 19Mm, Isi Marked 119.01 Uri 120.00 Ply Wood 6’ X 4’ X 6Mm, Isi Marked 120.01 Uri 121.00 Ply Wood 6’ X 4’ X 10Mm, Isi Marked 121.01 Uri 122.00 Ply Wood 6’ X 4’ X 12Mm, Isi Marked 122.01 Uri 122.02 Pattan 123.00 Ply Wood 6’ X 3’ X 6Mm, Isi Marked 123.01 Uri 124.00 Ply Wood 6’ X 3’ X 12Mm, Isi Marked 124.01 Uri 125.00 Led Bulb 15W, Isi Marked 125.01 Uri 125.02 Naugam 125.03 Rampur 125.04 Baramulla 125.05 Pattan 126.00 Emmery Paper 0 Size 126.01 Pattan 127.00 Cable Single Core Unsheathed Flexible Copper Conductor 1100V Grade Of Size 1.5Sqmm, Isi Marked 127.01 Ziran 128.00 Colour Powder ( 40 Gms ) 128.01 Pattan 129.00 20Mm Equal Tee Suitable For 20Mm Pp-R Pipe 129.01 Rampur 130.00 Pvc Cable Insulated And Pvc Sheathed 8 Sq Mm Double Core With Copper Conductor Suitable Up To 1100V, Isi Marked 130.01 Uri 131.00 Mcb Double Pole 16 Amps, 240V Ac, 50 Hz, 10 Ka , Isi Marked 131.01 Rampur 131.02 Baramulla 131.03 Pattan 132.00 Socket 16 Amp 3 / 5 Pin, Isi Marked 132.01 Uri 132.02 Naugam 133.00 Socket 5 Amp 3 / 5 Pin, Isi Marked 133.01 Uri 133.02 Naugam 134.00 Change Over Switch 63 Ams, Isi Marked. 134.01 Pattan 135.00 Steel Tape 5 Mtr, Isi Marked 135.01 Uri 136.00 Varnish 136.01 Uri 136.02 Naugam 136.03 Rampur 136.04 Baramulla 136.05 Pattan 137.00 Red Oxide 137.01 Uri 137.02 Naugam 137.03 Ziran 137.04 Baramulla 137.05 Pattan 138.00 Painting Brush 3 138.01 Uri 138.02 Naugam 138.03 Ziran 138.04 Baramulla 138.05 Pattan 139.00 Painting Brush 4 139.01 Uri 139.02 Naugam 139.03 Baramulla 139.04 Pattan 140.00 Painting Brush 6 140.01 Uri 140.02 Naugam 140.03 Baramulla 140.04 Pattan 141.00 Adjustable Spanners Of Length 305 Mm And Least Max Opening 35Mm Chrome Plated 141.01 Naugam 142.00 Electric Drill Machine Heavy Duty 10Mm, , Isi Marked 142.01 Uri 142.02 Naugam 143.00 Drill Bit 3Mm Size 143.01 Uri 143.02 Naugam 144.00 Drill Bit 4Mm Size 144.01 Uri 144.02 Naugam 145.00 Drill Bit 5Mm Size 145.01 Uri 145.02 Naugam 146.00 Drill Bit 6Mm Size 146.01 Naugam 147.00 Urinal Set Full Stall With Complete Accessories, Isi Marked. 147.01 Rampur 148.00 Drill Bit 8Mm Size 148.01 Uri 148.02 Naugam 149.00 Drill Bit 9Mm Size 149.01 Naugam 150.00 Drill Bit 10Mm Size 150.01 Uri 150.02 Naugam 151.00 Hanger Stand 450 Mm Length With 6 Hooks 151.01 Rampur 152.00 Drill Bit 12Mm Size 152.01 Uri 152.02 Naugam 153.00 Electric Tile Cutter Heavy Duty With Blade, Isi Marked 153.01 Uri 153.02 Naugam 154.00 Security Light 30 Watt, Isi Marked 154.01 Uri 155.00 Plug Top 2 Pin 5 Amp, Isi Marked 155.01 Uri 155.02 Naugam 155.03 Baramulla 155.04 Pattan 156.00 Plug Top 3 Pin 5 Amp, Isi Marked 156.01 Uri 156.02 Naugam 156.03 Baramulla 156.04 Pattan 157.00 Plug Top 3 Pin 15 Amp, Isi Marked 157.01 Uri 157.02 Naugam 157.03 Baramulla 157.04 Pattan 158.00 Exhaust Fan 150Mm Sweep With Mesh, Isi Marked 158.01 Pattan 159.00 Pvc Cable Insulated And Pvc Sheathed 1.5 Sqmm Single Core With Aluminum Conductor, Isi Marked 159.01 Uri 160.00 Pvc Cable Insulated And Un-Sheathed Single Core With Stranded Aluminum Conductor, Isi Marked 160.01 Uri 161.00 Pvc Cable Insulated And Pvc Sheathed 1.5 Sqmm Single Core With Copper Conductor Suitable Up To 1100V, Isi Marked 161.01 Uri 162.00 Pvc Cable Insulated And Pvc Sheathed 1100V Grade Twin Core With Standard Aluminum Conductor, Isi Marked 162.01 Uri 163.00 Pvc Cable Insulated And Pvc Sheathed 1100V Grade Twin Core With Standard Aluminum Conductor 16 Sqmm, Isi Marked 163.01 Pattan 164.00 Fevicol Synthetic Resin Adhesive ( Sh ) 1 Kg Packed 164.01 Uri 164.02 Naugam 164.03 Ziran 164.04 Pattan 165.00 Angle Holder With Skirt Black / White, Isi Marked 165.01 Uri 165.02 Naugam 165.03 Ziran 165.04 Pattan 166.00 Pvc Rawal Plug For 25 Mm Screw. 166.01 Pattan 167.00 Ms Screw 20 Mm 167.01 Uri 167.02 Naugam 167.03 Pattan 168.00 Ms Screw 25 Mm 168.01 Uri 168.02 Naugam 168.03 Pattan 169.00 Ms Screw 35 Mm 169.01 Uri 169.02 Naugam 169.03 Pattan 170.00 Pendent Holder Bakelite, Isi Marked 170.01 Uri 170.02 Pattan 171.00 Insulation Tape 2 Cm Width 10 Mtr Long 171.01 Ziran 172.00 Towel Rail Cp 750Mm Long With Fixing Clips 172.01 Rampur 173.00 Cgi Sheet 10Ft, Isi Marked 173.01 Uri 173.02 Naugam 173.03 Ziran 173.04 Pattan 174.00 Cgi Sheet 8Ft, Isi Marked 174.01 Uri 174.02 Naugam 174.03 Rampur 174.04 Ziran 175.00 Cgi Sheet 6Ft, Isi Marked 175.01 Uri 175.02 Naugam 175.03 Rampur 175.04 Baramulla 175.05 Pattan 176.00 Ms Iron Sheet 8 Mm Thick And Size 4X6. 176.01 Uri 176.02 Naugam 176.03 Rampur 176.04 Pattan 177.00 Brass Bib Cock 20Mm, Isi Marked. 177.01 Rampur 178.00 Pvc Cable Insulated And Pvc Sheathed 1100V Grade Twin Core With Standard Aluminum Conductor 10 Sqmm, Isi Marked 178.01 Uri 178.02 Baramulla 178.03 Naugam 179.00 Pvc Cable Insulated And Pvc Sheathed 1100V Grade Twin Core With Standard Aluminum Conductor 6 Sqmm, Isi Marked 179.01 Uri 179.02 Ziran 180.00 Drill Bit Set ( 1 Set ) 180.01 Uri 181.00 Ismb 150X75mm ( 3.75 Mtr Long ) 181.01 Uri 181.02 Naugam 181.03 Rampur 181.04 Pattan 182.00 Ismb 150X75mm ( 4.8 Mtr Long ) 182.01 Uri 182.02 Ziran 182.03 Pattan 183.00 Ismb 150 X 75 Mm ( 5.70 Mtr Long ) 183.01 Uri 183.02 Rampur 183.03 Baramulla 183.04 Pattan 184.00 Repiate 184.01 Pattan 185.00 Mild Steel Tmt Bars 12 Mm Dia Conforming To Is 17861985 185.01 Naugam 186.00 Long Angle Iron Picket ( Laip ) 1830 Mm Long And 45X45x6mm 186.01 Uri 186.02 Rampur 186.03 Baramulla 186.04 Pattan 187.00 Long Angle Iron Picket ( Laip ) 3050 Mm Long And 50X50x6mm 187.01 Uri 187.02 Naugam 187.03 Rampur 187.04 Baramulla 187.05 Pattan 188.00 Short Angle Iron Picket ( Saip ) 1500 Mm 188.01 Baramulla 189.00 Cement Opc 43 Grade In Hdpe Bag Of 50 Kgs Each Conforming To Is 8112-1989, 189.01 Uri 189.02 Rampur 189.03 Ziran 189.04 Baramulla 189.05 Pattan 190.00 Pp-R Tank Connector 20Mm With Check Nut And Washer 190.01 Rampur 191.00 Led Bulb 100W, Isi Marked. 191.01 Uri 192.00 Tube Light Fitting 1 X 36 / 40W 4 Long Complete With All Accessories, Isi Marked. 192.01 Uri 192.02 Ziran 192.03 Pattan 193.00 Tube Light Fitting 1 X 20W Complete With, Isi Marked. 193.01 Ziran 193.02 Pattan 194.00 Ballies 6 Dia 10 / 8 Long 194.01 Uri 194.02 Naugam 194.03 Rampur 194.04 Baramulla 195.00 Fire Extinguisher 6 Kgs Capacity Abc Map-90, Isi Marked 195.01 Uri 195.02 Rampur 195.03 Baramulla 195.04 Pattan 196.00 Fire Extinguisher 2 Kgs Capacity Abc Map-90, Isi Marked 196.01 Uri 196.02 Pattan 197.00 Hand Gloves Leather Make Armor Isi Marked 197.01 Uri 197.02 Pattan 198.00 Screw Driver Set Including Electric Tester As Per Sample Approved 198.01 Uri 199.00 Prong Copper Complete Set, Isi Marked 199.01 Uri 200.00 Aluminum Strip For Lc 200.01 Uri 201.00 Polythene Sheet Heavy Duty 201.01 Uri 201.02 Pattan 202.00 Cable Pvc Insulated And Pvc Sheathed, Stranded Aluminium Conductor Twin Core Of Size 4 Sqmm, Isi Marked. 202.01 Uri 202.02 Baramulla 203.00 Vitreous China Wash Hand Basin Of Size 580Mm X 440Mm 203.01 Uri 203.02 Baramulla 204.00 Salt 204.01 Uri 205.00 Electronic Ballast, Isi Marked. 205.01 Uri 205.02 Rampur 205.03 Baramulla 205.04 Pattan 206.00 Galvanised Steel Barbed Wire, Isi Marked A-5 Designation For Galvanised Steel Barbed Wire For Fencing Shall Conform To Is 278 – 1978. The Barbed Wire Shall Consist Of Two Line Wire 2.24 Mm Dia ( Tensile Strength 390 – 590 N / Mm2 Minimum Breaking Load Of Complete Barbed Wire 3Kn ) , One Or Both Containing 2.00 Mm Dia Barbs At 75 Mm Centre To Centre And Weighing 97 To 106 Kg Per Km. The Barbs Shall Have A Length Of Not Less Than 13 Mm And Not More Than 18 Mm. The Line And Point Wires Shall Be Circular In Section, Free From Scales And Other Defects And Shall Be Uniformly Galvanised. The Line Wire Shall Be In Continuous Length And Shall Not Contain Any Welds Other Than Those In The Rod Before It Is Drawn. The Galvanising Shall Conform To The Requirement As Laid Down For Light – Coated Wire Of Is 4826 – 1968 `Specification For Galvanised Coating On Round Steel Wires. Barbing Wire ( Line ) Shall Be Hard Type Heavy Coated ( 230 Gm / Sq M ) And Barbing Wire ( Point ) Shall Be Hard Type Light Coated ( 70 Gm / Sq M ) . The Galvanised Barbed Wire Will Be In Bundles Of 25 To 30 Kgs Each And The Bundles Will Be Packed In Hessian Cloth, The Bundles Should Be Strong Enough To Withstand Rough Handling During Transportation. Every Reel Of Barbed Wire Shall Be Marked Legibly With Bis Standard Make The Name Of Manufacturer, The Type Of Barbed Wire, The Diameter Of The Line And Point Wires, Barb Spacing And Length And / Or Mass Of The Reel. 206.01 Uri 206.02 Rampur 206.03 Baramulla 207.00 Defoliant Spray 207.01 Naugam 208.00 Joint Nipple 208.01 Uri 209.00 Wss Pump 6 Hp Hand Belt 209.01 Pattan 210.00 Ply Wood 8’ X 4’ X 19Mm 210.01 Baramulla 211.00 Looking Mirror 600Mm X 450Mm 211.01 Uri 211.02 Rampur 212.00 Hammer Of Weight 500G With Handle 212.01 Uri 213.00 Cutting Plier 6, Isi Marked. 213.01 Uri 213.02 Naugam 214.00 20Mm Union Suitable For 20Mm Pp-R Pipe 214.01 Rampur 215.00 Cgi Sheet 810 X3660 Mm Long, 0.63Mm Thick, Isi Marked. 215.01 Uri 215.02 Naugam 215.03 Rampur 215.04 Baramulla 215.05 Pattan 216.00 Gi Earth Plate Electrode 600X600x3mm Thick 216.01 Pattan 217.00 Clamps 217.01 Uri 217.02 Pattan 218.00 Charcoal 218.01 Uri 218.02 Pattan 219.00 Back Filled Compound 219.01 Pattan 220.00 Fire Retardant Tarpaulins 220.01 Naugam 221.00 Galvanised J Hooks With Bitumen Cup Washers Including Nuts, 8Mm Dia, 150Mm Long 221.01 Uri 221.02 Naugam 221.03 Rampur 221.04 Pattan 222.00 20Mm Elbow Suitable For 20Mm Pp-R Pipe 222.01 Rampur 223.00 25Mm Socket Suitable For 20Mm Pp-R Pipe 223.01 Rampur 224.00 Steel Roofing Troughs ( Srts ) Of Size 1630Mm X 613Mm X 180Mm Made Out Of 2Mm Thick Hot Rolled Carbon Sheet Steel Conforming To Is 5986 Fe-330 Complete With Set Of 14 Nos Ms Hexagonal Nut, Bolts And Washers 12 Mm Dia 40Mm Long And A Spanner Ojde Of Size 20-22 Per 25 Nos Srts. 224.01 Uri 224.02 Naugam 224.03 Rampur 224.04 Ziran 224.05 Baramulla 224.06 Pattan 225.00 Punched Tape Concertina Coil ( Including Spike And Handle ) With 50 Turns And Dia 1050 Mm, Having A Core Wire Of High Carbon Spring Steel Of High Tensile Strength. The Punched Tape And Core Wire ( 2.6 ± 0.035 Mm Dia ) Are Electro Galvanised To Provide Protection Against Out Door Exposure. The Punched Tape Is Mechanically Crimped Over The Core Wire And Then Formed Into A Coil At Various Parts Of The Periphery Of The Coil; Steel Clips “Total 129 Nos Per Coil Equally Spaced” To Connect The Individual Turns Of The Coil To Each Other So That It Opens Up Like An Accordion. The Width Of Strip As 19 Mm And Spacing Of Blades 24.00 ± 0.5 Mm C / C. The Weight Of Each Coil Will Be 15.2 ± 5% Kgs Without Packing Material And Coil Length 15 Mtr When Opened Up With An Effective Height Of 915 Mm. Each Coil Wound With Bituminised Hessian Cloth For Providing Protective Packing. Punched Tape Concertina Coil 1A Shall Confirm To Cqa, Ee, Pune Specifications No : Cqae / 5660 / 1602 / A And Controllerate Of Quality Assurance Of Engg. Equipment, Pune Drawing No Imga-0112 / B ( Sheet 1 Of 2 ) , Imga – 0112 / C ( Sheet 2 Of 2 ) , Impd – 1817 / B, Impd – 1820, Impd – 1821 / B And Impd – 1822 / B. 225.01 Uri 225.02 Naugam 225.03 Rampur 225.04 Baramulla 225.05 Pattan 226.00 New Generation Energy Saving And Environmental Friendly Long Life Versatile Pressure Die-Cast Aluminium Ip66 Roadway Luminaire With High Power Led 25 Watt ( With 5 Yrs Warranty Period ) As Light Source With Suitable Arrangement For Mounting On Fence Pole As Per Sample Approved. 226.01 Uri 226.02 Rampur 226.03 Baramulla 226.04 Pattan 227.00 Cgi Sheet 810 X3050 Mm Long, 0.63Mm Thick With Galvanized Of 375 Gsm ( Galvanisation As Per Is-429 ) 227.01 Uri 227.02 Naugam 227.03 Rampur 227.04 Baramulla 227.05 Pattan 228.00 Cgi Sheet 810 X 2440 Mm Long, 0.63Mm Thick With Galvanized Of 375 Gsm ( Galvanisation As Per Is-429 ) 228.01 Uri 228.02 Naugam 228.03 Rampur 228.04 Baramulla 228.05 Pattan 229.00 Cgi Sheet 810 X1830 Mm Long, 0.63Mm Thick With Galvanized Of 375 Gsm ( Galvanisation As Per Is-429 ) 229.01 Uri 229.02 Naugam 229.03 Rampur 229.04 Baramulla 229.05 Pattan 230.00 Bullet Proof Glass With Minimum Thickness Of 72 Mm Capable Of Withstanding Arms Fire ( 7.62 Mm ) From Distance Of 10 Mtrs. The Bullet Proof Glass Should Be Encased In Double Iron Frame Out Of With One Frame Should Be Fixed On The Bullet Proof Glass And The Other Frame Will Be Fitted On The Loop Hole. The Arrangement Should Be Such That The Bullet Proof Glass Should Be Removable / Openable From The Inside Of The Bunker So As To Enable Firing From Own Side Of Size 2 X 2 230.01 Uri 230.02 Naugam 230.03 Rampur 231.00 Bullet Proof Glass With Minimum Thickness Of 72 Mm Capable Of Withstanding Arms Fire ( 7.62 Mm ) From Distance Of 10 Mtrs. The Bullet Proof Glass Should Be Encased In Double Iron Frame Out Of With One Frame Should Be Fixed On The Bullet Proof Glass And The Other Frame Will Be Fitted On The Loop Hole. The Arrangement Should Be Such That The Bullet Proof Glass Should Be Removable / Openable From The Inside Of The Bunker So As To Enable Firing From Own Side Of Size 3 X 3 231.01 Uri 231.02 Naugam 231.03 Rampur 232.00 Honey Sucker Machine 232.01 Pattan 233.00 Tata Hitachi Ex-200 ( Store To Be Delivered At Pattan Loc ) 233.01 Primary Cartridge 233.02 O Ring 233.03 Element Filter Hydrulic 233.04 Element Pilot Filter 233.05 Grease Nipple 233.06 Element Fuel Filter 233.07 Fuel Water Separtor 233.08 Engine Oil Filter 233.09 Hydraulic Oil 233.10 Pin With Grease Hole 233.11 Adapter Tool 233.12 Point Tool 233.13 Washer 233.14 Pin Lock 233.15 Bucket Cylinder Assy 233.16 Cylinder Arm 233.17 Cylinder Boom 233.18 Pipe Assy 233.19 Hydraulic Hose 233.20 Adapter 233.21 Travel Motor 233.22 Hyd Motor 233.23 Yoke 233.24 Bolt 233.25 Track Adjuster Assy 233.26 Plug 233.27 Adapters Tee 233.28 Pressure Sensor 233.29 Hxe Nut 233.30 Sticker 233.31 Hose Nylon 233.32 Value Fc 233.33 Hose 3 / 8X900 ( Radiator ) 233.34 Hose Clamp 233.35 Control Value 233.36 Pipe Return 233.37 Hose ( Return Line ) 233.38 Lower Roller Assy 233.39 Pipe Return 233.40 Clip Band 233.41 Spacer 233.42 Adapter 233.43 Element Filter Assy 233.44 Element Filter Assy 233.45 Seal Kit Main Pump 233.46 Motor Oil 233.47 Alternator 24V 233.48 Fuel Pump 233.49 Motor Starting 233.50 Radiator Cap 233.51 Sprocket Wheel 234.00 Jcb Js 205 Excav ( Stores To Be Delivered At Pattan Loc ) 234.01 Primary Cartridge 234.02 O Ring 234.03 Element Filter 234.04 Element Pilot Filter 234.05 Grease Nipple 234.06 Element Fuel Filter 234.07 Fuel Water Separator 234.08 Engine Oil Filter 234.09 Hydraulic Oil Filter 234.10 Pin With Grease Hole 234.11 Hydraulic Adapter 234.12 Washer 234.13 Pin Lock 234.14 Bucket Cylinder Assy 234.15 Cylinder Arm 234.16 Cylinder Boom 234.17 Pipe Assy 234.18 Adapters 234.19 Hydraulic Hose 234.20 Travel Motor 234.21 Hydraulic Motor 234.22 Yoke 234.23 Bolt 234.24 Track Adjuster Assy 234.25 Plug 234.26 Adapters Tee 234.27 Pressure Sensor 234.28 Hxe Nut 234.29 Hose Nylon 234.30 Value Fc 234.31 Hose 3 / 8X900 ( Radiator ) 234.32 Hose Clamp 234.33 Control Value 234.34 Pipe Return 234.35 Hose Rubber 234.36 Hose ( Return Line ) 234.37 Lower Roller Assy 234.38 Pipe Return 234.39 Clip Band 234.40 Spacer 234.41 Motor Oil 234.42 Element Filter Assy ( Inner & Outer ) 234.43 Seal Kit Main Pump 234.44 Alternator 24V 234.45 Fuel Pump 234.46 Radiator Cap 234.47 Sprocket Wheel 234.48 Hydraulic Pump Assy 234.49 Pilot Pump
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Jammu And Kashmir View Result →
9.
Defence #10790289 AOC
Tender For Special Repair To Building No T-89 At Signal Vihar Of 172 Inf Bn (Ta) Madras, Brichgunj Mil Stn, Sri Vijaya Puram; 1 Taking down chowkats or frame with shutters area n.exc 1.5 Sqm (without taking of shutter from frame) including cutting holes to facilitate the taking down etc complete all as directed. 2 All as per item no 1 above but area exc 1.5 and n.exc 4 Sqm Each 3 Dismantling floor hearth or wall tiling of any description, size and thickness including cement mortor bedding (but not backing), removing rubbish off the premises etc complete all as directed. 4 Taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as directed. 5 Taking up or down 20mm bore of pipe GIsteel tubing and connections, including cleaning for refixing or removal outside MD land etc complete all as directed. 6 All as per item No 5 above but 25 or 32 mm dia 7 All as per item No 5 above but 40 or 50 mm dia 8 Demolition of Precast Concrete Block work built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. 9 Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor etc complete all as directed. 10 Demolition of PCC unreinforced in ground floor and paving above or below any thickness etc complete all as directed. 11 Demolition of reinforced cement concrete in roofs, floors (other than ground floor), beams, staircase, landing, chajjas and other similar suspended works etc complete all as specified and directed. 12 Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed. 13 Dismantling plain or corrugated steel sheeting any gauge, thickness, in roof coverings etc complete all as specified. 14 Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc completeall as directed. 15 M&L RCC M-30 (design mix) using 20 mm graded stone aggregateas in Chajjas complete all as specified and directed. 16 Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges for flat fair finished surfaces complete all as specified and directed. 17 M&L TMT mild steel bars 6 to8 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming tocomplete all as specified and directed 18 M&Lprecast RCC (1:2:4) type B1 (20 mm graded crushed stone aggregate) as in cover slabs and similar articles with plain faces set in CM (1:4) complete all as directed. 19 M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified. 20 Cutting chases in brick/ block masonry walls built in cement mortor for concealed water tubing or concealed conduit wiring, etc., and making good in CM 1:3, cutting not exc 10 cm girth etc complete all as directed. 21 M&L for Granite (of any type) work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, window cills, cooking platforms, vertical surfaces/wall lining and like including 15mm thick bedding in CM 1:6and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as directed. 22 Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed. 23 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. 24 S&F factory made wire gauge panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 5mm thick & 15mm wide stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes fitted in frame welded / sealed to the stiles & rails with suitable decorative PVC beading of 10mm x 10mm (90degree), and joined together with solvent cement. The wire gauge shall be stretched to tighten firmly 25 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 26 All as per item no 25 above but size of size 50x100mm 27 S&F 150 mm size aluminium anodised barrel tower bolts of extruded sections, with cast or sheet barrel and rolled or cast bolts etc complete all as directed. 28 S&F aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, length of bolt 300 mm etc complete all as directed. 29 S&F 100mm size butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed etc complete all as directed. 30 S&F incontinuous piano type hinges mild steel bright finish or electro galvanised width of flap 30 mm (when opened) complete all as directed 31 S&F Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg andfixed etc complete all as directed 32 S&F 150 mm size extruded aluminium handles fabricated type, anodised and polished etc complete all as directed. 33 S&F 100 mm size extruded aluminium handles fabricated type, anodised and polished etc complete all as directed. 34 S&F magnetic catch of approved design and pattern and fixed as directed etc complete all as directed. 35 S&F in repairs anodised aluminium alloy curtain rails 20mm dia with brackets fixed to required lengths etc complete all as directed. 36 S&F floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor overall length of cover plate 150mm etc complete all as directed. 37 S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed 38 S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. 39 S&F powder coated of any colour(minimum thickness of powder coating 50 micron)aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed 40 S&F powder coated of any colour (min thickness of powder coating 50 micron) aluminium window and ventilator shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (2 no.) complete all as specified and as directed. 41 S&F aluminium composite panel sheet of 3 to 4 mm thick as in cup board, wall cladding and false ceiling fixed onaluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10 to 30 mm, applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant, The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. 42 M&L for false ceiling with aluminum grid work (Size of grid 600x600mm) with 35x25x1.5mm main tee and 25x25x1.4mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20m centre to centre staggered and board with Eco board decorative type size 600x600x4mm thick etc complete all as directed 43 M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15mm thick screed bed in CM 1:6 all as specified and as directed. 44 All as per item no 43 above but prepolished kota stone in riser of steps, skirtings, dado and pillar with and including 10mm thick CM 1:4 backing coat 45 All as per item no 43 above but single piece prepolished stones in Treads with full round nosing and two nos 6mm wide and 3mm deep grooves along the exposed length. 46 M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed. 47 M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded aggregate as in Plinth Protection etc complete all as directed. 48 M&L for PCC in surface channels and drains type C2 1:3:6 (40 mm graded aggregate) all as specified and as directed. 49 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete all as specified and as directed. 50 M&L for glazed ceramic coloured tiles on vertical surface 300x 450X 7mm thick with and including 10mm thick CM 1:3 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed. 51 M&L forNon - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.with and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. 52 M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed. 53 All as per item No. 52 above but in vertical surfaces such as skirting and dado, laid over and including 10 mm thick rendering in CM 1:4. complete all as specified and as directed. 54 M&L for water proofing treatment to sunken surfaces of the slab in following sequences:- 55 (a) Slope correction by using 1:2:4(Nominal Mix) concrete minimum 25mm thickness at one end and a slope of 1:20 by using 12.5 mm graded stone aggregate with integral water proofing Chemical PIDI PROOF-LW mixed in proporation 200ml /50 Kgcementof DR Fixit of Pidilite Industries Ltd or STP No 1 (liquid) of STP Ltd in proporation 200ml / 50 Kg cement or equivalentas per manufacturer instructions complete. 56 (b) PCC padding with cement concrete 1:1.5: 3 type A0 (using 12.5 mm graded stone aggregate) 25mm thick with integral water proofing compound Dr Fixit manufactured by M/S Bouchemic or equivalent as per manufacturer instructions complete incl providing spout pipe of 50 mm as required. 57 (c) Vertical sides plastered in CM 1:4, 15mm thick with WPC @ 3 % by wt of cement and sunken portion to be filled(ponded) with water and tested for 7 days after required period of curing to observe leakages/seepages, if any, shall be arrested by pressure grouting and retested till leakages/seepages are completely stopped.(Note :-WPC Measured Separately) 58 (d) After ponding test the surface shall be dried and sides of sunken slab shall be treated with two coats proof coats black manufactured by M/S Dr fixit or equivalent as per manufacturer instructions all over and testing again for water tightness by ponding of water for 72 hours complete. 59 (e) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. 60 (f) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. 61 (g) M&L for 25 mm thick PCC 1:3:6 type C2 using 40mm graded aggregate as in Mass concrete in sunken treatment. 62 (h) M&L for 50 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate as in top surface after sunken treatment. The joints in CI/GI/PVC pipes, Nahani traps,WC, P/S traps shall be made leak proof. The gap around pipes in walls/beams shall be properly filled and sealed with water proof joint fillers. 63 (j) M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in Mass concrete in sunken treatment. 64 M&L for water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:-(i)Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii)Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm.(iii) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm.Note :- Water proofing compound shall be measured and paid separately. 65 M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. 66 M&L for 15mm thick rendering in two layers of 10mm thick backing coat in CM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement. (Note : Water proofing compound shall be measured and paid seperately) 67 M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces as in Ceiling Surface, soffits of slab/chhajasin CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed. 68 Supply only liquid integral water proofing chemicals complete all as specified and directed. [Make; Dr.Fixit Pidiproof LW+ of M/s Pidilite Industries or STP No. 1 (liquid) of M/s STP Ltd] (3% by wt of cement). 69 M&L for application of high build polymer cement sand mortar 1:2.5 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 20mm thick in two layers over slurry priming coat of 1 volume Nito bond SBRto 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing to match with the existing complete all as specified and as directed.[ Note : Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or equivalent chemicals of MC Bouchemics/Beck] 70 M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper etc complete all as specificed and as per directed. 71 M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper etc complete all as specificed and as per directed. 72 M&L for preparation of newly plastered surfaces of walland applying two coats of Oil Bound distemper over a coat of primer etc complete all as specified and directed. 73 M&L for preparation of newly plastered surfaces of ceilingand applying two coats of Oil Bound distemper over a coat of primer etc complete all as specified and directed. 74 M&L for preparation of newly plastered surfaces of wall and applying twocoat ofweather proofexterior acrylic emulsion paint with anti fungal property over a coat of exterior primer complete all as specified and directed. 75 M&L for preparation of old plastered surfaces of wall and applying twocoat ofweather proofexterior acrylic emulsion paint with anti fungal property etc complete all as specified and directed. 76 M&L for applying 1mm thick wall care putty on newly plastered surfaces of wall etc complete all as specified and directed. 77 M&L for writing letters/fiqures/numbers (Block. Roman, Italic or Indian) etc. n.exc. 30 cm high over and including black synthentic enamel painted surface all as specified and directed. 78 S&F 4.00 mm thick sheet glass ordinary quality n.exc 0.5 sqm etc complete all as directed. 79 S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws etc complete all as specified and as directed. 80 S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws etc complete all as specified and as directed. 81 S&F MS works as in wind ties for roof incl securing bolts etc complete all as specified and as directed. 82 S&F Roof Trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or Flat section) including distance pieces, cleats etc conforming to Fe-410-W grade E 250 Quality B complete all as specified and directed. 83 M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed. 84 M&L for providing & fixing in repairs stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with and including necessary stainless steel nuts & bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as directed. 85 M&L for preparation of new steel and iron surfacesexc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of red oxide, zinc chrome primer etc complete all as directed. 86 M&L for preparation of old painted steel surfaces over 10 cm in width or girth andapplying one coat of synthetic enamel paint etc complete all as specified and directed. 87 S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and as directed. 88 All as per item No. 78 above but 25 mm dia 89 All as per item No. 78 above but 40 mm dia 90 Supplying, hoisting and fixing in repairsrotational moulded polythylene water storage tanks (cylindrical vertical with closed top)hoisted and fixed in position all as specified in SSR Part-I of 1000 Litre capacity etc complete all as specified and directed. 91 S&F in repair 40mm bore gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe etc completeall as specified and directed. 92 S&F40mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified. 93 S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed. 94 S&F in repairs 15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed. 95 S&F in repairs 15mm size fancy type Bib taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed. 96 S&F in repairs 15mm size fancy type chromum plated Stop valves/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedetc complete all as directed. 97 S&F in repairs chromium plated two way bib cock 15mm bore etc complete all as specified and as directed. 98 S&F in repairs 15mm sizefancy type brass chromium platedwall mixer for mixing cold and hot water with necessary fittings, screwed down for iron pipe and fixed etc complete all as directed. 99 S&F in repairs glass shelf of size 600x120mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats etc complete all as directed. 100 S&F in repairs soap dish fixed with chromium plated brass screws and wooden/plastic cleats etc complete all as directed. 101 S&F in repairs Brass chromium plated tubular towel rail, 600mm long between flanges fixed with screws and wooden/plastic cleats etc complete all as directed. 102 S&FPVC connections 15mm size with PTMT nuts of length 450mm etc complete all as directed. 103 Taking down PVC waste ,vent,rain water pipes incl fittings in any position 104 S&F 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 105 All as per item no 95 above but 110mm dia 106 S&F 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 107 All as per item no 97 above but 110mm dia 108 S&F 75mm bore of pipe PVC (SWR) bends any radius with access door etc complete all as directed. 109 All as per item no 99 above but 110mm dia 110 S&F 110 mm bore of pipe PVC (SWR) plain bends any radius etc complete all as directed. 111 S&F in repairs 75mm bore of pipe PVC (SWR) vent cowletc complete all as directed. 112 S&F in repairs 110mm bore of pipe PVC (SWR) vent cowletc complete all as directed. 113 S&FStack clamps out of 50mm by 5 mm flat ironand 16mm dia roundiron stays, includingbolts and nuts andsecuring ends of stays towall or rooffor 75 mm dia pipecomplete all as specified and as directed 114 S&FStack clamps out of 50mm by 5 mm flat ironand 16mm dia roundiron stays, includingbolts and nuts andsecuring ends of stays towall or rooffor 100 mm dia pipecomplete all as specified and as directed 115 S&F in repairs Cast iron Nahani trap with diameter of outlet 75mmwith grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed. 116 S&Fin repairs 75mm dia outlet PVC (SWR) PVC (SWR) floor trap with grating including jointing with solvent cement 117 S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm with and including CI brackets, PVC waste pipe, 32 mm bore brass CP waste couplings with long screwed shanks and fly nuts etc complete all as specified and as directed. 118 S&F in repairs glazed earthen ware viterous china wash down water closet (pedestal pattern) white coloured with and including seat cover, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device and flushing pipe including connection to trap and to flushing pipe, anti syphonage pipe etc complete all as directed. 119 S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. 120 S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engineer-in-Charge. 121 S&F in repair looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thickAC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed 122 S&F in repair chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook, complete all as specified and as directed by Engineer-in-Charge. 123 S&Fin repairstainless steel grade 304, 0.50mm thick, glossy finish, wall mounted kitchen plate rack assembeled set of 750 x 600 x 250mm and fixed with screws complete all as specified and directed 124 Taking down carefully aluminium point wiring(light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed. 125 M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated andunsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets,fan regulators etc., all as specified and as directed for the following:- 126 One light point controlled by one switch 127 One exhaust fan point controlled by one switch 128 One bell point controlled by one switch 129 One fan point controlled by one switch and one regulator 130 One 3 pin switch socket outlet point 5 amps on same board with other switches 131 One 3 pin switch socket outlet point 5 amps on independent board 132 One light point controlled by two 2-way switches, with cables 1.5 sqmm size 133 All as per item No 116 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed. 134 Supply and fixswitch piano flush button single pole oneway 5 amp complete all as specified and as directed. 135 Supply and fix switch piano flush button single pole two way 5 amp complete all as specified and as directed. 136 Supply and fix switch socket combination 3 & 2 pin (multi pin) 5 amp flush type complete all as specified and as directed. 137 Supply and fixsocket outlet multipurpose 3 & 2 pin5 amp flush type complete all as specified and as directed. 138 Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed. 139 Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed. 140 Supply and fix lamp holder(angle type) PVC body with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge. 141 Supply and fix B-22 LED lamp of 9/10 watt all as speciifed and dircted 142 Supply and fix of bell push single phase, 240 Volts, 50 Hz, complete all as specified and as directed by Engineer-In-Charge. 143 Supply and fixbell Ding Dong 240 Volts 50 Hz complete all as specified and directed by Engr-in-Charge. 144 Supply and fix fan speed regulator, electronic suitable socket typefor single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge 145 S & F in repairs Single pole and neutral metal enclosure with 2 pin and earth plug and socket and top plug complete with 20 Amps MCB SP , 240 Volt all as specifiedand as directd 146 Taking down serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers, safety wire of size not less than 1.00mm & bolts including cotter pin for complete all as directed. 147 Taking down serviceable exhaust 300 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades complete and refixing back at site with new clamps, nuts, washers & bolts complete all as directed. 148 Supply and fix in repairs exhaustfan suitable for on working of AC 230 V ,50 Hz380 mm sweep 1200 RPM,with steel metal body ,incl louvers depositing old fan in MES storecomplete all as specified 149 Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed.Note-: Incoming & outgoing connections from yhe DB shall be provided with proper lugs/ thimbles etc 150 Supply and fix in repair sheet metal enclosure Loadline distribution vertical DB, MCCB as incomer 4 ways 415 volts, with 200 amps rated bus bar double door suitable for mounting MCCB 100 A TPN as incomer and MCBs as outgoing, Triple pole as incoming complete all as specified and directed including taking down old MCB DBs complete.The Rate shall be included the incomer MCCB TPN of 100 AmpsNote-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc 151 Supply and fix in repair MCB single pole240 volts, 6 to 32 amps B series complete all as specified and as directed by Engineer-in-Charge 152 Supply and fix single pole and netural 240 Volts 32 amps complete all as specified and as directed by Engineer-in-Charge 153 Supply and fixing in repair of aluminium housing LED batten 20 Watt mounted battenfitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours includinglamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. 154 Supply and fixingin repair of aluminium housing LED batten 10Watt mounted battenfitting 2 ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours includinglamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. 155 S&F in repair of 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. 156 M & Lin repairs for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessoriesfixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLSsingle core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre. 157 All as per item sr no 140.00 above but of size 4 sqmm complete all as specidied and as directed. 158 M&L for earthing in repairscomplete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I 159 supply & Layin repair XLPEinsulated,heavy duty 1100 volt grade electricarmoured LT UG cable with aluminium conductorof size 25 Sqmm 3.5 Core in trenches/along the wall/including making all connections, saddles, spacers including scaffolding if any required for saddling the cable in walls of building of height up to 25 meter, complete with aluminium lugs as required at site and as directed by Engr-in-Charge 160 Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and 38mm ID confirming to IS 14930 -II and ISI Marked all specified and directed. 161 Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil 162 Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cmsoil / hard dense soil. 163 Removing excavated material Soft Soil / hard dense soil not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point. 164 Disconnecting the electric connection ,taking down theexisting Electric Energy meter of any type and size care fully , refix the same incl electric aconnection to the meter at existing / new location after repairs of building all as specified and as directed. 165 S& F in repairssteel water tubeslight grade (ISI marked) galvanised with all fittings supportingfor ceiling fans in ceilings of size 50 mm bore pipe, complete, all as specified and as directed by Engr-in-Charge.
Contract Date: Mar 27, 2026 Contract Value : 47.03 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Andaman And Nicobar Islands View Result →
10.
Defence #10735412 AOC
Tender For Comprehensive Maintenance Of Otm Accn At Dscc Under Ge Dronachal; 1 Demolition of Brick or Stone Masonry built in cement mortar etc completecomplete all as specified and directed. 2 M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge 3 M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge 4 Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick (below or above GL) incl tiling if any complete all as specified and directed 5 M&L forcement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as infoundation, filling, subbase and mass concrete complete all as specified & directed. 6 M & L PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed 7 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. 8 M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:4) complete all as specified and directed. 9 M&L glazed ceramic colour tiles, in vertical surfaces350x 250x 7 mm/ 450X 350X 7mm thick thick set and jointed in neat cement slurry and pointed in white or colou cement to match fixed over 10mm thick CM (1:3) as in backing coat complete all as specified and directed. 10 M&L for Vitrified ceramic coloured light shade 10mm thick(square/rectangular) polished,area of each tile not exceeding 0.36 Sqm as in floors over and including 20mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified& directed 11 M&L for Vitrified ceramic coloured light shade 10mm thick(square/rectangular) polished,area of each tile not exceeding 0.36 Sqm on vertical surfaces such as skirting, dado and risers to steps etc over & including 10 mm thick rendering in CM 1:4 set& jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified & directed. 12 M&L Sand filling under floor/pavementor in foundation including watering and consolidation 13 M&L machine pressed precast concrete interlocking paver block in any shape and size confirming to IS-15658-2006of 60 mm thickness M-35 grade with grey cement andpigment (reflective type) complete all as specified and as directed. 14 M&L Granite of 20mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps,jambs,pillars, window cills,cooking platforms, wash basin counter and likeover and icluding 20 mm screed bed in CM 1:3all as specified and directed. 15 M&LPCC 1:2:4 type B1(using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, mass filling/ levelling coarse as it bedding coarse and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed 16 M&L for Taking down of cement plaster in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. all as specified and directed 17 M&L for 20 mm thick rendering in CM 1: 4 on faces of brick or concrete surface, shall be done in two coats comprising 5mm thick in CM 1:4 mixed with water proofing compound @3% by weight of cement and over a backing coat of 15mm thick in CM 1:4and finished with trowel to an even and smooth surfaces without using any extra cement complete all as specified and directed.Note : Water proofing compound shall be measured and paid in respective item 18 Supply only Integral water proofing compound 19 M&L for 15 mm thick renderingbrick or concrete surface in CM 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed. 20 M&L for 10mm thick rendering onfair faces of brick or concrete surface in cm 1:3 finishing the surfaces fair & even without using extra cement as in ceiling complete all as specified and directed. 21 M & L Preparation of new plastered surface wall and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement basedputty complete all as specified and directed. 22 M & L for preparation of newly plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by the Engr-in Charge. 23 M&L for prepration of new ceiling surfaces, applying 3coat of white wash on ceiling all as specified. 24 Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge 25 Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge 26 Taking down and re-fixing of old aluminum doors Shutter in same opening with necessary required repairs and fittings including galss rubber bedding door frame rubber bedding and glazing clips(Glass pan, floor hydraulic spring handles, mortice lock and tower bolt will be measured and paid separately) area exc 1.50 sqm but n.exc 4.00 sqm each 27 S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified. 28 Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solovent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in M.S. frame welded sealed to the stiles and rail with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site as per specification and drawing. 29 S&F Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed. 30 Hacking out old glass (any thickness size quality or description) from wooden frame or stone, concrete or brick surrounds glazed with putty or fixed with beads all as specified and directed. 31 S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed 32 S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed 33 M&L12mm thick Prelaminated particle board, exterior grade,prelaminated both side with decorative choice lamination , fixed to aluminium door, partitions complete all as specified and as directed. 34 S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.180 mm and fixed and with tinned tacks or galvanised wire staples, complete all as specified. 35 S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kgaluminium extruded section body complete all as specified and as directed. 36 S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed 37 S&F for 150 mm aluminium handles, cast type, anodised complete all as specified. 38 S&F for ISI Marked 200mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified. 39 S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. 40 S&F for 100mm Mild steel butt hinge complete all as specified and directed. 41 S&F 4-levers Aluminium Mortice lock, vertical type, size 100 mm complete all as specified and directed 42 M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. 43 S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified. 44 Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness & any positionincluding cover filletscomplete all as specified and directed 45 S & F Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specifiedcomplete all as specified and as directed. 46 M&L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paidseparately) complete all as specified and directed 47 Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as spfd. 48 Dismantling timber scantlings 40 sq. cm and over in section, for unframed work in any position complete all as specified and as directed. 49 S&F steel work as in rafter, purlins, posts tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) including postspecial shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 Complete all as specified and as directed. 50 S&F pre- painted galvalume aluminum zinc coating GI Based corrugated steelsheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas,fixedwith self tapping screws complete all as specified & directed 51 S&F in repair 6mm thick coloured polyicarbonate sheet (ISI marked) with shelf drilling steel screw with washer on roof and joint of two sheet will be filled with silicon weather proof sealent and cover with aluminum strip of size of 50x3 mm top and bottom and fixed with shelf drilling steel screw with washer on roof complete all as specified and directed. 52 S&F in repair for 3 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with bolts and washer in roof, wall etc complete all as specified. 53 Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 54 Supplying and laying of GI tubing Dia 15mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. 55 Taking up or down 20mm mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 56 Supplying and laying of GI tubing Dia 20mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. 57 Taking up or down 25mm mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 58 Supplying and laying of GI tubing Dia 25mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. 59 S&F 25mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. 60 S & F in repair of ISI marked 15mm bore stop valves/angle valve concealed fancy type cast copper alloy, chromium plated with long shank and cup , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. 61 S&F 15 mm Pillar taps, cast copper alloy, chromium plated fancy type, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixing complete all as specified and directed by engr in charge.Make : Prayag or equivalent 62 Supply and fixing in repair for ISI marked 15mm bore, fancy type bib tap of chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. 63 S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. 64 S & F for in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge 65 S&F brass chromium plated tubular towel ring complete all as specified and as directed by the Engineer-in-Charge 66 S & Fbrass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge 67 S&F in repair for vitreous China wash basin, white, flat back, size 450x300mm including PVC connections 15mm size with PTMT nuts of length 450mm,waste coupling, 40mm pvc waste pipe of suitable length, brackets,and cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by the Engineer-in-Charge. 68 S&F in repair vitrous china white oval type under counter WHB of size not less than 195x600x425mm of first quality fixed all as specified and directed. 69 S & F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed by the Engineer-in-Charge. 70 S&F in repair vitreous china wash down water closed pan (pedestal Pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed. 71 Supply and Fixing in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed by the Engineer-in-Charge 72 S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader complete all as specified and directed. 73 S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall with PVC clamps complete all as specified. 74 S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorss complete all as specified. 75 Supply & Fixing repair PVC Bath Cabinet mirrorcomplete all as specified and as directed by the Engineer-in-Charge 76 S&F in repair brass CPwall mixer for mixinghot and cold water screwed down for iron pipe and fixed. 77 S&F in repair brass CP centre hole mixer for (WHB) mixinghot and cold water screwed down for iron pipe and fixed 78 S&F in repair waste coupling 40mmsuitable size for kitchen sink of PTMT (half or full threaded) complete all as specified and directed 79 S&Fin repair40mm bore PVC waste pipe for kitchen sink one mtr long complete all as specified and directed. 80 S&F in repair 32mm bore PVC waste pipe for wash basin one mtr long complete all as specified and directed. 81 S&Fin repair 100mm dia CPgrating (Minimum weight 25 gms) all as specified and directed. 82 S&Fin repair PVC connection 15 mm size with PTMT nuts of length 600 mm all as specified and directed. 83 S&F in repair Plastic water closet seat,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. 84 S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as spfd & directed 85 S&F in repair for replacement of Jet spray with holder on EWC in repairs all as specifie and directed complete Make : As per sample approved by GE 86 S&F in repair health faucets CP with 1.2 mtr long CP flexible pipe complete all as specified and as directed. 87 S&F in repair two way C.P. Bib cock 15mm dia complete all as specified and as directed. 88 Dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed 89 Hoisting & Fixing 500 Ltr rotational moulded polyethylene water stotage tanks(cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed. 90 Hoisting & Fixing 1000 Ltr rotational moulded polyethylene water stotage tanks(cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed. 91 M & L for preparation of old plastered surfaces of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required sharde & colour, as per manufacturers specification over a coat of 1mm thick putty complete all as specified and directed by the Engr-in Charge. 92 M & L for preparation of old plastered/unplastered surfaces of Ceiling and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required sharde & colour, as per manufacturers specification over a coat of 1mm thick putty complete all as specified and directed by the Engr-in Charge. 93 M&L for preparation of old plastered/unplastered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. 94 M&L preparation of old surface of ceiling and applying Two coat white wash complete all as specified and as directed 95 S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame with5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified 96 M&L Preparation of old decorated surfaces of wall/ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand removing stopping nails and applying two coat of plastic emulsion on walls/ceiling over primer and a coat of 1mm thick white cement based wall care putty all around including complete sanding of existing surface treatment with sand paper or iron patti / flat / mechanical sanding machine complete all as specified and directed. 97 M&L for Preparation of old painted surfaces of Steel/ steel based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified. 98 M&L for preparations ofold wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints all as specified and directed. 99 Waterproofing of terrace with Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnaum Product code 5662 OR Berger PU RoofKoat 100 (A) Surface Preparation(i) All surfaces should be dry and free from contamination such as oil, grease, loose particles, decayed matter, moss, algal growth, laitance and all traces of shutter release oils and curing compounds.(ii) All loose and de-bonded concrete/ screed shall be removed and proper repairing to be carried with polymer modified mortar. Washing the roof-terrace surface and making it dust free.(iii) The careful sealing of existing cracks & joints before the application is extremely important for log lasting waterproofing results. Clean concrete cracks / hairline cracks, of dust, residue or other condemnation. Fill all prepared cracks with acrylic flexible crack filler Dr. Fixit Cracks-X Paste OR Asian SmartCare CrackSeal OR Berger Homeshield Crackfill Paste.(iv) Cracks more than 5mm fill all repaired with Polymer modified cement sand mortar in the ratio of 1:3 duly admix with Dr. Fixit Pidicrete URP OR equivalent product in Asian Paints OR Berger Homeshield Latex Plus @ 10% by weight of cement.(v) Pre wet the surface prior to application of primer and allow surface water to evaporate to make surface saturated dry (SSD) condition 101 (B) Bond Coat(i) Applying Dr Fixit Pidicrete URP OR equivalent product in Asian Paints OR Berger Homeshield Latex Plus a SBR latex based bonding chemical used for repairs & waterproofing, at a ratio 1:1 one part chemical one part cement. Make sure bond coat is done properly and spreader evenly to the entire surface with brush or roller. 102 (C) Pre-Coat Application(i) Applying one coat of Dr. Fixit Pidicrete URP OR equivalent product in Asian Paints OR Berger Homeshield Latex Plus with cement @ 1:1.5 one part chemical, one and a half part cement and lay 45 GMS fiber mesh on still wet coat of URP. Make sure fiber mesh sticks to the surface evenly. 103 (D) Primer Application(i) Apply one coat of acrylic based primer Dr. Fixit Primeseal Primer OR Asian PU Magnum Resin & Asian PU Magnum Hardner OR Berger SealOPrime (diluted with water in the ratio of 2:1) spreading at the rate of 8-10 /Sq.mt /Litre. Allow the primer to air cure for 4-6 hours.(E) Coating Application(i) Stir well before use. Apply 1st coat of Dr. Fixit HydroShield PUD plus OR Asian SmartCare PU Magnum Product 5662 OR Berger PU RoofKoat without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. 104 (E) Coating Application (Contd(ii) Allow the first coat to dry for approximately 4-6 hours before applying the 2nd coat at 90° to the first coat and 3rd coat at 90° to the second coat. Ensure there are no pinholes or air bubbles on the membrane surface. (iii) Apply second coat of Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnum Product 5662 OR Berger PU RoofKoat without dilution spreading at the rate of 0.70/litre/Sq.mt/ Coat. Ensure there are no pinholes or air bubbles on the membrane. (iv) Apply third coat of Dr. Fixit HydroShield PUD Plus OR Asian SmartCare PU Magnum Product 5662 OR Berger PU RoofKoat without dilution spreading at the rate of 0.70/litre/Sq.mt/ Coat to achieve total dry film thickness of 800 to 1000 microns at forced coverage @ 2- 2.1 /litre/Sq.mt in 3 coats. Ensure there are no pinholes or air bubbles on the membrane. (v) Make sure glass fibre mesh is completely embedded. Surface should be smooth after the application. Check to see no void surface is left untreated / uncoated.(vi) All the concrete / masonry pedestals present on the roof, constructed for supporting the water tanks or pipe lines or dish antenna/solar panel, etc., also should be coated with extra coat of same material incorporating reinforcing fabric.(vii) Allow the system to air cure for 7 days prior to carry out ponding test.Note:- System comes with 10 years waterproofing warranty from Manufacturer or Authorized Applicator. 105 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. 106 M&L for point wiring with and incl 1.5 sqmm (nominal area) PVC insulated multi-stranded copper conductor FRLSH in and incl PVC casing and capping ISI marked 20/30 mm size or as required at site incl with its fittings and fixture such as tees, bends, elbows and juction boxes all moduler type surface mountingetc with 1.5 Sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing and common earth terminal complete all asspecified and directed.Note :- Modular PVC Surfacemounting boxes and for mounting switch ,socket withmodular frame plate and covercomplete all as specified and directed 107 (a) One light/Fan/Exhaust fan point controlled by one switch. 108 (b) One 3 pin socket outlet 5 Amps on independent board. 109 (c)One 3 pin socket outlet on same board. 110 M&L for wiring complete 2.5 Sq.mm single core multi standard copper conductor FRLS PVC insulated 650/1100 Volts drawn through non metalic rigid PVC casing capping including necessary accessories like bends lees and elbows etc fixed on wall/ceiling including sunken type pressed steel terminal boxes of suitable size with plastic laminated white/coloured top sheet cover 2 mm thick including 1.5 Sq.mm FRLS PVC insulated copper green wire for earth wire complete for 3/5 pin 15 Amps switch socket combination complete all as directed by Engineer-in-Charge. 111 S&F in repairs modular switch flush single pole one way 6 Amps. 112 S&F in repairs socketmodular outlet 5 pin with gang box 6 Amps 113 S&F in repairs socket modular outlet 5 pin 15 Amp with gang box multipurpose. 114 S&F in repairs modular switch flush single pole one way 15/20 Amps. 115 S&F in repairs sheet metalsingle pole and neutral encloserwith a two pin and earth plug and socket complete with one MCB SPN 20 amps, 240 V. 116 S & F in repairs Modular AC Box With 20A SP MCB, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top 117 Supply and fixing in repair of MCCB forDPX 415 Volts 100 Amps 4 pole with breaking capacity of 25 KALegrand/ Schinider/ C&S 118 Supply & Fixingin repairs MCB DB TPN 415 Volts 200 Amps rated bus bar having 4 way single door shutter. 119 Supply & Fixingin repairs MCB DB SPN240 Volts 200 Amps rates bus bar having 4 way double door shutter. 120 Supply & Fixing in repairs MCB DB SPN 240 Volts 200 Amps rates bus bar having 8 way double door shutters. 121 S&F in repairs MCB TPN 415 Volts of capacity 63 Amps complete all as directed by Engineer-in-Charge. 122 S&F in repairs MCB SPN 240 Volts of capacity 40 Amps complete allas directed by Engineer-in-Charge. 123 S&F in repairs MCB SP 240 Volts of capacity 5 to 30 Amps complete allas directed by Engineer-in-Charge. 124 S&F sub main wiring4 Sqmm with three runs of 4 sqmm single core multi stranded copper conductor in PVC conduit including all fitting fixed on wall/ceiling including4 Sqmm PVC insulated copper earth wire connected to earth including taking down, complete all as directed by Engineer-in-Charge. 125 S&F sub main wiring6 Sqmm with three runs of 6 sqmm single core multi stranded copper conductor in PVC conduint including all fitting fixed on wall/ceiling including6 Sqmm PVC insulated copper earth wire connected to earth including taking down, complete all as directed by Engineer-in-Charge. 126 Supply & fix in repairs recess mounted LED 15 Watt Ultra slim recess-mounting round LED downlighter designed with excellent thermally managed aluminium pressure die-cast housing with heat-dissipating fins for larger surface area finished in epoxy powder-coated white to deliver high-efficacy light output and uniformity, utilising edge-lit technology. 127 Supply & fix in repairs ceiling mounted LED light fitting 36 Watt Recess-mounting ultra-slim LED 2x2 edge-lit tile in aluminium extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as directed by Engineer-in-Charge. . 128 Supply & fixin repairsceiling mounted LED light fitting 36 Watt surface panel ultra-slim LED 2x2 edge-lit tile in aluminium extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as directed by Engineer-in-Charge. . 129 S&F in repairs LED flood light fitting 150 watt LED floodlight luminaire High-efficiency IP65 innovative LED floodlight with pressure die-cast aluminium housing and toughened glass in the front with unique flood optics to ensure uniform distribution and savings upto 50% as compared to conventional system 130 Supply & fixin repairs Wall mounted LED - 20 W Linear Aluminium High Lumens output LED batten made from aluminium extruded channel, powder coated with opaque diffuser for glare free light complete with accessories all as specified and directed. 131 Supply & fix in repairs Wall mounted LED batten 10 watt LED - Linear Batten made from Polymer extruded channel, with opaque diffuser for glare free light, complete with accessories all as specified and directed. 132 S&F in repairs LED lamp 9/10 W, 230VAC, 50Hz, cool white single phase with all fitting and fixing accessories complete all as specified and directed. 133 S&F in repairs LED inverter lamp 20 W, 230VAC, 50Hz, cool white single phasewith all fitting and fixing accessories complete all as specified and directed. 134 S & F in repairs modular stepped type electronic fan regulator flush type on the existingphenolic laminated sheet etc. as reqd 135 S&F in replacement piano type switch single pole 230 volt flush type 5 Amps 136 S&Freplacement piano type switch single pole 230 volt flush type 16 Amps.(Normal switch) 137 S&F in replacement switch socket combination withpvc gangbox 6/16 Amp as per existing ISI mark.(Normal type) 138 S&F in replecement switch socket combination with pvc gangbox6 Amp as per existing ISI mark. 139 Supply and fixing in ,replacement ELCB 63 Amps, 4 pole 140 S & F in repairs Modular Metal flush box 3 module 141 S & F in repairsModular White cover plate 3 module 142 S & F in repairs Modular Metal flush box 6 module 143 S & F in repairsModular White cover plate 6 module 144 S& Fin replacement of PVC 3 Pin plug top 15 Amp complete as specified 145 S& Fin replacement of PVC 3 Pin plug top 5 Amp complete as specified 146 S&F energy saving and enviornment friendly long life LED security light fitting 1 x 36W LED, versatile, pressure die cast aluminium IP-66 protection with high power LED as light source and arcylic cover etc incl all accessories prewired complete including mounting on bracket and necessary connection to ceiling rose etc & suitable bolts and nuts with washers, connecting with PVC insulated multi stranded copper flexible cable of size 0.5 Sqmm three core from ceiling rose to fittingincluding taking down the old one, complete all as specified and directed. 147 M & L for Servicing of1200/1400 mm ceiling Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes and painting including replacing of un serviceable part like bearing gun metal bush condensor of suitable capacity and re-assembling the same and complete all as directed by Engineer-in-Charge. 148 M & L for Servicing of 250/300/350mm Exhaust Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of un serviceable part like bearing gun metal bush condensor of suitable capacity and re-assembling the same and complete all as directed by Engineer-in-Charge. 149 Supply and fix building security light bracket, bend to 120 degree angle, made out of 32 mm bore, galvanised iron, light grade tubing (approx 1.2 mtr in length) including necessary two nos suitable size of clamps with nuts, bolts and washers, etc.and two coats of synthetic enameled paint over a coat of red oxide primer including taking down the old unserviceable one complete all as specified and directed. 150 Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6.3mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground level with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron wire of4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel and earth wire protected by galvanized pipe light grade 40 mm bore and thorugh test point including necessary earth work and excavation in any type of strata, andGI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm kdia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete 151 M&L earthing complete with copper plate of 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead electrode buried in ground vertically not less than 2.25mtrs deep below ground level with top edge of the plate not less than 1.5mtrs below ground level withcopper strip 20 x 3 mm as earthing lead including necessary excavation and earth work (in any of strata) providing charcoal dust, salt mixedin continuous layer 15 CM all around the plate and balance pit will be filled with vigitable soil approved byengineer in charge, PCC (1:3:6 ) type C1 in chember ,Precast 50 mm thick in cement ( 1: 2:4) type B.1 with CI framewith cover, 20mm dia bore light grade GI watering pipe furnel etc fixing of GI Pipe of suitable size protection for earthing lead from earth pit to test point complete & making connection 152 M&L for installing and commissioning Copper coatedChemical Earthing electrode oflength 3 mtr, inner dia of 40 mm and outer pipe of dia 76 mm with minimum thickness of 250 micron, after boring 20 metre deep, 150 mm in diain hard/soft soil with help of boring machine,filling the bore hole withblack cotton soil upto 17 mtrs level i.e below the electrode bottom level, filling remaining portion by pouring suitable chemical bentonide compoundduly mixed with water and filling earth enhancement material (minimum approx. 30 kg) into the augured hole in slurry form and allowed to set, covering of the composite structure (earth electrode + earth enhancement material), covering remaining portion with backfill soil/ material, welding copper strip with existing head of earth electrode including necessary PCC earth pit work and including all necessary nut, bolts, washers etc complete 153 Taking down unserviceable geysers of any capacity and make from each location by disconnecting and sealing all electrical and water lines for annual maintenance/servicing. Overhauling, dismantling the same for repair/replacement of unserviceable parts, including brazing to inner tank, cleaning, taking out sludge from inner tank and washing with cleaning solution and reassembling and refixing the same in each original location/ position, connecting all electrical and water connections including provn of 2.5 Sqmm 3 core sheathed multi-stranded copper conductor flexible cable from connector block to geyser and testing complete all as specified and directed. (NOTE (a) New parts shall be measured and paid separately under Supply only rates here-in-after. (b) Minor parts, if any, not mentioned in the schedule but required for smooth functioning of geysers are deemed to be included in the rate of the item.) 154 Supply only PVC inlet pipe, 15mm bore, 450 long including both end check /end nuts and washers. Make 155 Supply only PVC steel braided outlet connection pipe, 15mm bore, 450 mm long including both ends check nut & washer complete. 156 Supply only heating element of any type 1500 Watts. 157 Supply only heating element of any type 2000 Watts. 158 Supply only thermostat of any type suitable for 25 ltrs capacity geyser. 159 Supply only internal assembly complete with packing ring, bolts, nuts & washers suitable for 25 ltrs capacity geyser. 160 Supply only thermal cut off ISI marked suitable for 50/35/25 ltrs capacity geyser. 161 Supply only fusible plug made of brass having lead alloy fuse suitable for 25 ltrs capacity geyser. 162 M & L for painting geyser of capacity 25 ltrs complete, in situ, with two coats of synthetic enamel paint, white, by spraying including filling cavities with filler, denting after scrubbing down old paint using emery paper, cleaning, washing etc. and writing MES No complete all as specified and directed. 163 S&F in repairs change over 32 Amps 4 pole 415 V complete all as directed by engr-in-charge. 164 S&F in repairs change over 63 Amps 4 pole 415 V complete all as directed by engr-in-charge. 165 Attending daily complaints of DSCC and 14 Acre land area by deputing adequate number of Skilled teams of qualified Electrician and helper any time of the day ( Minimum 01 Skilled Electrician & 02 Helper ) for repair / tightening of end terminals of street light fitting, Flood light, LED strip on poles , High Mast light , Post top lanten of any size/capacity at anyheightand repair the street lights, Flood lights and Post Top lanten having minor faults i.e loose connections, carbon deposition , Shiftingand refixing the same etc and makethe light functional.After rectifying the defects of the electricalsystemreplace the U/S items such as street light , flood lights, LED strips, MCBs TPN ,connection plate , thimbles and timmersmall pieces of electrical cables PVC insulated copper multistranded conductor of sizes 2.5 Sqmm to 6 Sqmm twin core and length not increasing 1.5 mtrs completeall as specified and directed by Engr-in-Charge. (Complaint slip shall be part of the bill) and In Addition one 16 mtrs hight hydraulic vehicle with driver & operatorof the same team will opearte and manage day to day street light Complaints and update the status of complaints on daily basis and confirmed throgh concerned JE E/M daily as per directed by Engr-in Charge. 166 Note:- (i)Complaint shall be done within 24 hrs afterintimation by JE E&M Engineer-in-Charge failling whichpenalty of Rs 250 per day per complaint will be levied on contractor.(ii) One supervisorwill report to JE E/M , Engineer -in-Charge on daily basis with complaint register. (iii) Contractor shall be fully responsible for Complaint slip/ Job card prepared and submitted on daily basis ( Format as per provided by the Engineer in Charge.(iv)This item pertains to attending complaints ofstreet light/flood light/LED strips on poles/High mast, MCB, & timer panel including other minor items such as insulating tape, screws etc as required to attend the complaint to the entire satisfaction of user/Engr-in-Charge.(v)Items shall be measured and paid seperately under respective item of Sch A 167 S&F in repair of Automatic Street Light Switch Three phase with Nature Switch-03 as the controlling unit for automatic switching of street lights based on LUX level of Natural light. The Sensor (Nature switch) along with suitable power contractor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust proof, Electric Shock proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) confirming to IP54. The contractor, MCB and circuit Wiring should suitable enough to take load5 KW equally distributed over 3 phase (4 KW/Phase). The contractor rating 25 Amps (4-pole) and MCB(single pole) rating : 20-25 Amps(SP-03 Nos), complete all as specified and directed.Make. Nature Switch Model No SWADEEP-02EC 5 KW3P or equivalent makes in Legrand/L&T/GE. 168 M & L for replacement of LED aviation light luminaries comprising of aluminium housing with polycarbonate enclosure complete Make : Bajaj/Philips/Havells complete after taking down the old unserviceable one all as directed. 169 M&L for taking down High Mast light fittings mounting on cage from High mast pole of 12.5/16/20 mtrs heightfor repairing of LED/MH light fitting of any size/type and reinstalling the fitting/cage back to its position after carrying out repairs all as directed by EIC (Cost of LED spare parts will be measure seperately) 170 M&L for rewinding ofexisting burntmotor 2 HP of high mast light fitting with replacement winding wire and refixing the same alongwith proper alingment with steel rope etcincluding electrical connection and testing complete all as directed by Engr-in-charge. 171 Supply and replacement of Existing High mast panelfront door openable with 3.0 mmthickness MS sheet of size 0.9x0.6x0.6mpowder coating paint including locking arrangement , Panel internal wiring of suitable size wire alongwith 63 Amp MCCB as incomer and 03 Nos 40 Amps MCB as outgoing and mounting on 40x40x6 mm MS angle and grouted in PCC completeincluding one coat synthetic enamel paint complete all as per directed by Engr-in-charge 172 Supply and fixingin replacementoutdoor type IP66 thermoplastic polycarbonate cable entry junction box of size 155 x 210 x 92 mm, weather proof with knockouts for cable entry- black colour with necessary cable connector link inside the box and fixing arrangement by clamp, nut bolts etc fixied on pole/ walls complete all as specified and as directed. Make - 173 Supply & fixing in replacement of new generation energy saving and environmental friendly long life LED street light 60 watt made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07by using 2 core PVC insulated cable aluminium conductor 2.5 Sqmm approx 2 m length complete all as specified and directed.Make : Havells, Cat No-ENDURAPEARLNEOL60WLED757PASYTOPC or equivalent of Philips/Jaquar. 174 S&F in repairs aluminium strip of size 25 x 4 mm fixed to wall/ pole with aluminium saddles andscrews for roof/ down conductor above ground/ buried in ground/ drawn in conduit/ fixed to poles or any other indicated situation for loop earthing including connected upto test terminal point complete all as specified and directed.Note : - Insulators/conduit/pipe shall be measured and paid separately under appropriate items here in after 175 S&F in repairs Copper strip of size 20 x 3 mm fixed to wall with copper saddles andscrews drawn in conduit/ fixed to poles or any other indicated situation for loop earthing including connected upto test terminal point complete all as specified and directed.Note : - Insulators/conduit shall be measured and paid separately under appropriate items here in after 176 S&F in repairs fixing Galvanised iron strip of size 32 x 6 mmfixed to wall with Galvanised iron saddles andscrews / buried in ground/ drawn in conduit/ fixed to poles or any other indicated situation for loop earthing including connected upto test terminal point complete all as specified and directed.Note : - Insulators/conduit/pipe shall be measured and paid separately under respective item of works
Contract Date: Apr 25, 2026 Contract Value : 21.99 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Madhya Pradesh View Result →
11.
Defence #10566033 Price Bid
Tender For Additional / Alternator And Improvement To Smqs ( Phase- Iii ) At Afa Hyderabad; 1 Demolition Of Pcc In Roof Surfaces Including Existing Treatment And Demolition Of Pcc Under Sunken Floors Of Bathroom Including Floor Tiles Rooms Flooring Etc Of Any Description And In Any Position Not Otherwise Specifically Provided, Complete All As Specified And As Directed 2 Demolition Of Rcc Lintels, Chajja, Slab Cover, Beams Of Any Description And Height Upto 3M To 5M, Not Other Wise Specically Provided And In Simillar Works Complete All As Specified And As Directed 3 Removal Of Debris ( Aggregates Concrete, Rubble Etc Of Any Description ) Obatained From Demolition Including Loading And Unloading To A Distance Of 5.0 Km From The Starting Point And Deposited Where Directedcomplete All As Specified And As Directed.Note: One Load Equals To 0.62 Cum Of Aggregate / Concrete Debris / Rubble Etc. 4 M&L For Making Good With Cement Mortar 1:4 Under Cills Or Over Arches, Lintels And Bressummers, Including All Pinning When Necessary, At Any Height With Necessary Scafoldings Complete All As Specified And As Directed. 5 Demolition Of Brick / Stone Masonry Built In Cement Mortar Of Any Description, Complete All As Specified And As Directed 6 M&L For Pre-Cast Cement Concrete Block Masonry In ( 1:3:6 ) Type C1 ( Using 20Mm Graded Stone Aggregate ) With Solid Blocks Exc 10Cm In Width And Setting In Cement Mortar 1:4 In Walls / Parapet Walls Etcat Any Heightcomplete All As Specified And As Directed. 7 Taking Down Cement Plaster On Brick Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc Complete All As Specifiedand Directed. 8 Cleaning The Roof Surfaces And Applying Oil Basedbitumen Primer @0.20 Kg Per Sqm, Providing4mm Thick App Modified Water Proofing Membrane Weight Not Less Than 4 Kg Per Sqm Reinforced With Non Woven Polyster Mat Weight Not Less 160 Gm Per Sqm Having Softening Point Not Less Than 140 Degree Centigrade, Longitudinal Tensile Strength Not Less Than 800N Per Sqcm Tearing Strenght Of 180N With Minimum Of 10 Cm Side Laps And 15 Cm End Laps By Application Of Torch, Applying A Coat Of Blown Grade Hot Bitumen Over The Membrane @ 1.20 Kg / Sqmas Per Manufacturer Instructionscomplete All As Specified And As Directed 9 M & L Cement Concrete ( 1:2:4 ) Typeb-1 Using ( 20Mm Graded Stone Aggregate ) In Haunching And Padding On Chajjas, Approchable / Unapprochable Areas Of Any Height, Complete All As Specified And As Directed 10 M&L For Applying One Coat Of Solar Reflective Bituminous Aluminium Paint Over Surface Of App Water Proofing Membrane @ 0.1 Kg / Sqm Complete All As Specified And As Directed. 11 Taking Up Or Downsteel Tubing And Connections Upto 25 Mm Bore For Refixing Or Removalcomplete All As Directed. 12 S&F 15 Mm Bore Steel Tubing Medium Grade Galvanised With All Fittings And Fixed Complete To Walls, Ceilings Or Laid In Floorscomplete All As Specified And As Directed. 13 S&F 20 Mm Bore Steel Tubing Medium Grade Galvanised With All Fittings And Fixed Complete To Walls, Ceilings Or Laid In Floors Complete All As Specified And As Directed. 14 Refixing Old 15 Mm Gi Tubing Obtained From Sl Item No 11Of Any Grade, Fixed With All Necessary Fittings / Connections In New Or Old Positions To Walls And Ceilings Or Laying In Floorscomplete All As Specified And As Directed. 15 Refixing Old 20 Mm Gi Tubing Obtained From Sl Item No 11 Of Any Grade, Fixed With All Necessary Fittings / Connections In New Or Old Positions To Walls And Ceilings Or Laying In Floors Etc Complete All As Specified And As Directed. 16 Cutting Chases For Concealed Water Tubing In Brick Or Stone Walls Or Concrete Surfaces And Making Good To Facings Where Required And Pointing In Cement Mortar 1:3, Cutting Not Exc 10 Cm Girthcomplete All As Specified And As Directed. 17 M&L For Pcc 1:2:4 Type B0 ( Using 12.5Mm Graded Stone Aggregate ) Average 25 Mm Thick With Water Proofing Compond As Per Manufacturers Instructions, Finished Even And Fair In Bottom Portion Of Sunken Floor Portion . Complete All As Specified And As Directed. Note : ( Wpc Will Be Measured & Paid Separately Under Relevant Item ) 18 M&L For Rendering 15Mm Thick In Cm 1 : 3 On Fair Faces Of Brick Or Concrete Surfaces Mixed With Water Proofing Compound As Per Manufacturers Instructions Finished Even And Smooth In Sunken Portion Withoutusing Extra Cement Etc Complete As Specified And As Directed. Note :Wpc Will Be Measured & Paid Separately Under Relevant Item 19 M&L For Applying A Uniform Coat Of Blown Grade Bitumen 85 / 25 @ 1.20 Kg Per Sqm Conforming To Is 702 Over A Coat Of Bituminous Primer @ 0.70 Kg Per Sqm And Over That Provision Of Water Proofing 3Mm Thick App Based Polymeric Membrane Of Weight Not Less Than 3 Kg Per Sqm Reinforced With Polyster Non Woven Fabric ( Wt Not Less Than 150 Gms / Sqm ) Laid On Prepared Surface By Forced Application As Per Manufacturers Instructions In Sunken Floorcomplete All As Specified And As Directed. 20 M&L For Pcc ( 1:5:10 ) Type E2 ( Using 40Mm Graded Stone Aggregate ) In Foundationfilling And Mass Concrete Complete As Specified And As Directed.. 21 Supply Only Intergral Water Proofing Compound As Per Manufacturers Instructions Complete All As Directed. 22 M&L For 40 Mm Dia Gi Pipe As Spouts In Sunken Floors, Medium Grade Complete All As Specified And As Directed 23 Dismantling Floor Hearth Or Existing Wall Tiling Incl Cement Mortar Bedding ( But Not Backing ) Including Removal Of Debris From The Site, Complete All As Specified And As Directed 24 M&L Joint Free Non Skid Ceramic Coloured Tiles Of Premium Quality 7 To 8 Mm Thick, ( Square / Rectangular ) , Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Colour Tiles, Laid Over And Including Screed Bed In Cm ( 1:6 ) 10 Mm Thick Complete All As Specified And Directed. 25 M&L Joint Free Glazed Coloured Ceramic Tiles Of Digital Quality In Vertical Surfaces Of Dados Skirting Etc450x300x7-8Mm Thick, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, Laid Over And Including Backing Coat / Renderingin Cm ( 1:4 ) 10 Mm Thick Complete All As Specified And Directed. ( Note: Colour Of Tile Will Be Finalized By Engr-In-Charge ) 26 M&L For Roughening Surfaces Of Old Concrete Floor By Picking, Hacking For Keys, Sweeping Clean And Washing Down With Water To Remove Dust, Etc. For Preparation For Tilingand Spreading & Laying Of Cera Bond Chemical @ 6 Kg / Sqm For Fixing Floor Tiles Complete All As Specified And As Directed 27 M&L For Joint Free Glazed Colour Tiles Of Premium Quality 7 To 8 Mm Thick, ( Square / Rectangular ) , Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Colour Tiles, Laid Over And Including Screed Bed In Cm ( 1:6 ) , 10Mm Thick Complete All As Specified And Directed. 28 All As Per Item No 27 Above But In Vertical Surfaces Of Dados, Skirtings Etc Laid Over And Including Backing Coat / Rendering In Cm ( 1:4 ) 10Mm Thickcomplete All As Specified And As Directed. 29 S&F Of 20 Mm Thick Granite Work ( Table Rubbed And Polished ) Black Coloured, Cooking Platform And Like In Cement Mortar ( 1:4 ) Including Pointing In White Cement ( 1:2 ) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite , Laid Over And Including Screed Bed 15 Mm Thick In Cm ( 1:6 ) Complete All As Specified And As Directed. 30 M&L Rounding To Edges Of Stone Slabs One Edge, In Cooking Plotforms Complete All As Specified And As Directed. 31 M & L For Rendering 15 Mm Thick In Cement Mortar 1:6On Fair Faces Of Brick Work Or Concrete Surfaces At Any Height With Neccesary Scafoldings, Finished Even Smooth Withoutusing Extra Cement. 32 M & L Forexternal Rendering 15 Mm Thick Cement Plaster In Two Layers 5Mm Thick In Cm 1:4 With Wpc / Liquid As Per Manufacturers Instruction Over 10 Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfacesat Any Height With Neccesary Scafoldings, Finished Even Smooth Withoutusing Extra Cement Note :- ( Wpc Will Be Measured & Paid Separately Under Relevant Item ) 33 M & L For Rendering 10 Mm Thick In Cement Mortar 1:4 On Ceilings & Soffits Of Stair Case Waist Slab, Beam Bottom, Etc, Ofconcrete Surfacesat Any Height Including Neccesary Scafoldings, Finished Even And Smooth Without Using Extra Cement.All As Specified And As Directed. 34 Preparation Of Newly Plastered Internal Wall Surface And Applyingtwo Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Priming Paint Over A Coat Of 3Mm Thick Wall Care Putty Complete All As Specified And As Directed 35 Preparing Newly Plastered External Wall Surfaces And Applying Two Coats Of Cement Based Paint Over A Coat Of Cement Primer, Complete All As Specified And As Directed. 36 Preparingnewly Plastered Surfaces Of Ceiling And Applying Three Coats White Washcomplete All As Specified And As Directed. 37 S&F In Repairs Of Vitreous China Wash Basin, White, Flat Back, Size 580X450mm Excluding Taps, Waste Chain And Plug And Porcelain Stopper But Including Brackets Complete All As Specified. 38 S&Fof Waste Coupling Of32 Mm Chromium Plated For Glazed Ware Basins With Long Screwed Shanks And Fly-Nuts Complete All As Specified And As Directed. 39 S&F Of Pillar Taps 15 Mm Dia, Cast Copper Alloy Long Nose, Chromium Platedfancy Typescrewed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe Of 15 Mm Bore Complete All As Specified And As Directed. 40 S&F In Repair Of Bib Taps, Cp Fancy Typescrewed Down, Screwed For Iron Pipe Or For Brass Ferrule Andfixed To 15Mm Bore Pipecomplete All As Specified And As Directed 41 S&F In Repairs Of Stop Valves / Angle Cocks 15Mm Dia Cpfancy Typescreweddown High Pressure Screwed Both Ends For Iron Pipe Or For Unions, Of 15Mm Borecomplete All As Specified And As Directed. 42 S&F In Repairs Of Stop Valves ( Concealed Type ) 15Mm Dia Cpfancy Type Screweddown High Pressure Screwed Both Ends For Iron Pipe Or For Unions, Of 15Mm Bore Complete All As Specified And As Directed. 43 S&F In Repairs Of Vitreous China Squatting Pan, Orissa Pattern Of Size 580 X 440Mm, White With Integral Foot Rest Including Trap And Set In Concrete P Ors Trap As Per Site Requirements Including Making Good To Floor Complete All As Specified And Directed By Engr -In- Charge. 44 S&F In Repair 10 Lts Pvc Valveless, Syphonic Action Type, Flushing Cistern, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets For Fluslhing Cistern And Connections To Pipes Including Long Bends Complete All As Specified And As Directed. 45 S&F In Repairs Of Pvc Waste Pipe 32 Mm Bore, 900 Mm Longcomplete All As Specified And Directed By Engr -In- Charge. 46 Supply And Fix In Repairs, Pvc Connection 15 Mm Bore With Brass Cp Nuts, Of Length 450 Mm Complete All As Specified And As Directed. 47 S&F High Density Polyethylene Pipes 32Mm ( Hdpe ) With Collar Of Pressure Rating 6 Kgf / Cm2 Fixed Complete To Walls, Ceilings Or In Floors Etc.Complete All As Specified And As Directed. 48 S&F In Repairs For 15 Mm Dia Gun Metal Gate Valve With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And As Directed. 49 S&F In Repairs For 20 Mm Dia Gun Metal Gate Valve With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And As Directed. 50 S&F In Repairs For 125 Mm Cp Shower Rose, Fancy Type With Cp Arm, All As Specified And As Directed 51 S&F In Repair Of Stainless Steel Gratings 100Mm Dia, Hinge Or Openable Type, Fixed With Suitable Solvent Cement Etc Complete All As Specified And As Directed. 52 S&F Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long, Complete All As Specified And As Directed 53 Supply And Fix In Repairs Stainless Steel Sink With Drain Board Of Overall Size 915Mmx460mm Bowl Size 410Mmx330mmx160mm With Draining Board Made Out Of Stainless Steel 1 Mm Thick For Kitchenwith Plugs, Washers And Waste Pipe Including Cast Iron Cantilever Bracketsand Connecting To Union / Pipe Complete All As Specified And As Directed. 54 S & F In Repairs Brass Cp Fancy Tubular Towel Rail Of 20 Mm Dia, D Type 600 Mm Long Between Flanges, Including Brackets Complete All As Specified And As Directed. 55 S&F Pvc Cabinet Of Size 585X290x215, Complete All As Specified And As Directed. Cat No; Cc-252 Ofpearl Precision Products Or Equivalent In Prayag Or Equivalent Approved By Ge. 56 S&F Dish / Plate Display Rack Stainless Steel Hand Made - Wall Hangingof Cat No. P.336 Pf Prayag Or Equivalent ( Approximte Size 600Mm X 900Mm X 250Mm ) , Complete All As Specified And As Directed. 57 S&F 5Mm Thick Bevelled Edge Looking Mirror Of Size 600X450mm, Of Selected Quality, Including Fixing To Walls With Catch Nuts, Complete All As Specified And As Directed. 58 Taking Down Eaves Gutters And Rainwater Pipes ( Any Size Or Pattern ) , Including All Fittings, Heads, Shoes, Bends, Swan-Necks, Etc., Including Cleaning Or Refixing Or Removal To Store ( Measured Overall As Fixed Along The Centre Line Over Fitting And Accessories ) Complete All As Specified And As Directed. 59 S & F110 Mm Bore Pvc ( Swr ) Pipes Type BSingle Socketed, In Any Lengthfixed To Walls Or In Floors, Ceiling Etc Complete All As Specified And As Directed. 60 S & F75 Mm Bore Pvc ( Swr ) Pipestype B Single Socketed, In Any Length Fxed To Walls Or In Floors, Ceilingcomplete All As Specified And As Directed. 61 S & F 110 Mm Dia Bore Pvc ( Swr ) Bends, Any Radius With Oval Access Door, Complete All As Specified And As Directed. 62 S & F110 Mm Dia Bore Pvc ( Swr ) Bends, Any Radius, Complete All As Specified And As Directed. 63 S & F75 Mm Dia Bore Pvc ( Swr ) Bends, Any Radius With Oval Access Door, Complete All As Specified And As Directed. 64 S & F 110 Mm Bore Pvc ( Swr ) Vent Cowl, Complete All As Specified And As Directed. 65 S & F 110 Mm Bore Pvc ( Swr ) , Junction Single, ( Single T ) Equal Or Unequal With Access Door, Complete All As Specified And As Directed. 66 S&F In Repair Of Cast Iron Nahani Trap Of 75Mm Size With Cp Grating Including Jointing To Waste Pipe Fixed In Cement Concrete Type B1 ( 1:2:4 ) , Including Taking Down Existing Of Any Descriptioncomplete All As Specified. 67 S&F In Repair Of Cast Iron Floor Trap Of 100 Mm Size With Cp Grating Including Jointing To Waste Pipe Fixed In Cement Concrete Type B1 ( 1:2:4 ) , Including Taking Down Existing Of Any Descriptioncomplete All As Specified. 68 S & Fin Repairs Salt Glazed Stoneware Gully Trap, P Type 150X100mmmm, Including Taking Down Existing Of Any Descriptioncomplete All As Specified And As Directed. 69 Complete Removal Of The Existing Treatment On Walls And Applying Three Coats Of White Wash Including Preparation Of Surfaces Complete All As Specified And Directed By Engineer-In-Charge. 70 Complete Removal Of The Existing Treatment On Ceilings And Applying Two Coats Of White Wash Including Preparation Of Surfaces Complete All As Specified And Directed By Engineer-In-Charge. 71 M&L For Complete Removal Of The Existing Old Treatment On Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Primer Over 3Mm Thick Wall Care Putty, Including Preparation Of Surfaces Complete All As Specified And Directed By Engineer-In-Charge. 72 M&L For Complete Removal Of Existing Painting On Old Plastered Or Unplastered Surfaces On Wallsincluding Cornices By Applying Two Coats Of Cement Based Paint Over A Coat Of Cement Primerall As Specified And Directed By The Engineer-In-Charge. 73 M&L For Complete Removal Of Existing Painting On Old Plastered Or Concrete Facia / Cornice Surfaces And Applying Two Coat Of Santex Matt Painting Over A Coat Of Primertcomplete All As Directed. 74 M & L For Preparing Old Painted Wood And Wood Based Surfaces Of Any Description, Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint All As Specified And Directed By Engineer-In-Charge. 75 M & L For Preparing Old Painted Steel And Iron Surfaces Of Any Description, Not Otherwise Described Applying One Coat Of Synthetic Enamel Paint All As Specified And Directed By Engineer-In-Charge. 76 M & L For Preparing Old Painted Steel And Iron Surfaces, Plain Or Moulded, N Exc 10Cm Width Or Girth When Unconnected With Other Painting Or When Painted In A Different Tint, Not Otherwise Described Applying One Coat Of Synthetic Enamel Paint All As Specified And Directed By Engineer-In-Charge. 77 S&F Rotational Moulded Pvc Water Storage Tanks Of 500 Ltrs Capacity ( Cylindrical Vertical With Closed Top ) , Threelayered, Hoisted And Fixed In Positionincluding Out Let And Inlet Connections Including Dismantling Existing Water Tanks Of Capacity 500 Litres, All As Specified In Ssr Part–I And As Directed.. 78 S & F20 Mm Dia Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & High-Density Plastic Ball Screwed For Iron Pipe ( Minimum Weigh 210 Gms ) Complete All As Specified And As Directed. 79 S&F Stainless Steel Tubular Curtain Rails 20Mm Diacompleteall As Specified And As Directed 80 S&F 20Mm Dia Fancy Type Brass Chromium Plated Curtain End Finials, Completeall As Specified And As Directed 81 S&F Stainless Steel Brackets Suitable For 20Mm Dia Curtain Rails, Etc Completeall As Specified And As Directed 82 Taking Down Chowkats Or Steel Window / Door Frames With Shutters ( Without Taking Off Shutters From Frames ) Not Exc 1.5 Sqm Each Complete All As Specified And As Directed. 83 Taking Down Chowkats Or Steel Window / Door Frames With Shutters ( Without Taking Off Shutters From Frames ) Exc 1.5 Sqm But Not Exc 4 Sqm Each Complete All As Specified And As Directed. 84 Taking Down Shutters Of Any Description Of Area Exc 1.0 Sqm But N Exc 2 Sqm Each Complete All As Specified And As Directed. 85 M & Lpcc 1:2:4 Type B1 Using 20 Mm Graded Aggregate For Bed Blocks For Securing Hold Fast And The Like Including Weathering, Sligtly Rounded Or Chamfered Angles And Throating, With Necessary Formwork Complete All As Specified And As Directed. 86 S & F Pressed Steel Frames 105X60mm Size Made With 1.25 Mm Thick Sheet , For Doors With Singlerebates Including Necessary Fixing Lugs, Lock Strick Plate, Etc, Complete All As Specified. 87 S & F Pressed Steel Frames 125X60mm Size Made With 1.25 Mm Thick Shee For Doors With Double Rebates Including Necessary Fixing Lugs, Lock Strick Plate, Etc, Complete All As Specified. 88 M&L For Pcc 1:3:6 Type C0 ( Using 12.5Mm Graded Stone Aggregate ) As In Filling Of Hollow Portion Of Pressed Steel Framecomplete All As Specied And As Direceted. 89 S & F 30Mm Thick Factory Made Flush Shutters, Solid Core Construction, With Block Board Core And Ply Wood Face Panels, Commercial Type On Both Sides Complete All As Specified And As Directed. 90 S & F35 Mm Thick Factory Made Second Class Hardwood Glazed / Gauzed And Skeleton Door Shutters , Open Rebated And Prepared To Receive Glass, Gauze, Mesh Etc With Sash Bars Divided Into Squares With Plain Chamfered Or Rounded Mitred Beads For Securing Glass Etc, Size Of Members Of Shutters As Specified In Ssr Part I Section 8, Clause 8.24 ( A ) And Fixed To Chowkats Complete All As Specified And As Directed. 91 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Aluminium Three Track Sliding Windows Of Approximate Size 2000Mm X 1200Mm Made Out Of Anodised Aluminium Extruded Section Outer Frame With Gutter 92X45.5X1.50Mm And Shutter Section 40X18x1.50Mm Fully Glazed Including 5Mm Thick Sheet Glass, Rubber Gasket, Aluminium Beading, Suitable Fancy Type Handles, Locking Device, Rollers And All Other Required Hardware Fittings As Per Standard Engg. Practice, Complete All As Specified And Directed. 92 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Aluminium Two Track Sliding Windows Of Approximate Size 115Mm X 1200Mm Made Out Of Anodised Aluminium Extruded Section Outer Frame With Gutter 61.85X45.5X1.50Mm And Shutter Section 40X18x1.50Mm Fully Glazed Including 5Mm Thick Sheet Glass, Rubber Gasket, Aluminium Beading, Suitable Fancy Type Handles, Locking Device, Rollers And All Other Required Hardware Fittings As Per Standard Engg. Practice, Complete All As Specified And Directed. 93 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Aluminium Ventilators Of Approximate Size 600Mm X 800Mm, Top Hung Type Made Out Of Anodised Aluminium Extruded Section Of Thickness Not Less Than 1.50 Mm, Including 5 Mm Thick Tinted Glass, Suitable Aluminium Hinges, Aluminium Tower Bolts, Rubber Gasket, Aluminium Beading, Suitable Fancy Type Handles, Peg Stay And Including All Other Required Fittings As Per Standard Engg. Practice, Complete All As Specified And Directed. 94 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Anodised Aluminium Frame For Windows And Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And As Directed. 95 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Anodised Aluminium Window Shutters, Side Hung Type Without Sash Bars, Aluminium Sections Weighing 0.55 Kg / M Including Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws, Anodised Aluminium Fittings Such As Peg Stays 150Mm Long ( 1 No. ) Hinge Type B-21 100Mm Long ( 2 No. ) Suitable Handle ( 1 No. ) Complete All As Specified And As Directed. 96 S&F 4.80Mm Thick Sheet Glass, Ordinary Quality, In Squares Exc 0.5 Sq. M Each Pane And Fixed To Aluminium Frames Or Shutters Of Any Description Complete All As Specified And Directed By Engr In Charge. 97 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Aluminium Anodised Grill, Aperture N Exc 75 Mm , Size 6Mm X 4Mm Thick, Including 1 Mm Thick F Or H Section Channelsfixed With Steel Screws Complete All As Specified And Directed. 98 S&F Stainless Steel Wire Cloth, 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Wire Staples, Complete All As Specified And As Directed 99 S&F In Repair Ms Framed Work Such As In Grills And Framed Guard Bars For Windows / Ventilators With Ends Of Bars Shouldered And / Or Riveted, Or Forged Into Spikes Etc And Similar Work Conforming To Fe 290, Gde E 165 Etc Complete All As Specified And As Directed 100 S&F Solid Pvc Frame ( Single Rebated ) Of Size 60Mm X 30Mm Made Out Ofsolid Pvc Foam With Homogeneous Fine Cellular Structure Having Smooth Outer Integral Skin With Suitable Metal Stiffner And Fixed With 100 X 8 Sheet Metal Csk Screws Complete All As Specified And As Shown On Drawing. ( Note:- Door Frame Shall Be Water Proof, Termite Proof, Elegant And Should Have Excellent Screws Holding Strength To Fix Hinges And Hold Doors Properly For A Long Life ) All As Specified And As Directed 101 S&F Factory Made Solid Pvc Profiled Panel Door Shutter 28Mm Thick With Integral Skin As Frame & 3Mm Thick High Pressure Compact Laminate On Both Side Of Approved Colour As Infill, With C Type Gi Or 40 X 20 X 19 Of Ms Pipe As Stiffner & Supplying & Fixing In Frame At Site As Per Specificationsall As Specified And As Directed 102 Taking Down Shutters Of Any Description Exc1 Sqm But N Exc 2 Sqm And Refixing The Same In Same Openings After Repairing Or Cutting Bottom As Per Site Requirement, Complete All As Specified And As Directed 103 S & Fbutt Hinges Of 100Mm Size, Medium Weight Cold Rolled Mild Steel And Fixedcomplete All As Specified And As Directed. 104 S & F Butt Hinges Of 100Mm Size, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised, Type C-21 Complete All As Specified And As Directed. 105 S & F150mm Long Extruded Aluminium Alloy Handles, Cast Type Anodised Complete All As Specified And As Directed. 106 S & F Tower Bolt 150Mm Long, Extruded Aluminium Anodised Complete All As Specified And As Directed. 107 S & F 300Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple ( Bolt Type ) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Complete All As Specified And As Directed. 108 S & F 300Mm Long Mild Steel Ordinary Rat And Tail Rod Pattern Springs, Including Roller And Roller Plate Complete All As Specified And As Directed. 109 S&F50 Mm Size Butt Hinges, Medium Weight, Cold Rolled Mild Steel Complete All As Specified And As Directed. 110 S&F Second Class Hardwood Small Fittings Such As Brackets Of Any Type, Latch And Hinge Blocks, Shaped Door And Window Stops And The Like, Including All Necessary Labours; Articles N Exc 200 Cu. Cm Each Complete All As Specified And As Directed. 111 S&F 150Mm Long Floor Door Stopper Of Aluminium Alloy Body And Tongue, Anodised, With Hard Drawn Steel Spring. Fixed In Floor, Etc Complete All As Specified And As Directed 112 Running Welding In Repairs Of Thickness Of Metal N.Exc 6 Mmcomplete All As Specified And As Directed. 113 M & L Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description, Not Otherwise Described, Over 10 Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint ( Ordinary Tint ) Over A Coat Of Pink Primer, Complete All As Specified And Directed. 114 M & Lfor Preparation And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxideprimer On Newly Treated Steel Surfaces Of Any Description, Not Otherwise Described Over 10 Cm Width Or Girth Complete All As Specified And As Directed. 115 Demolition Of Cement Concrete In Ground Floors And Pavings N.Exc 15 Cm Thick Above Or Below Ground Level, Complete All As Specified And As Directed.. 116 M&L For Hardcore Of Gauge N Exc. 63 Mm Of Broken Stone Boulders, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And As Directed. 117 M&L 75 Mm Thick Cement Concrete In Sub Base To Pavings, Type D2 1:4:8 ( 40 Mm Graded Aggregate ) Complete All As Specified And As Directed 118 M&L 75 Mm Thick Cement Concrete, Type B-1, 1:2:4 ( 20Mm Graded Aggregate ) As In Pavings, Finished Even And Smoothwithout Using Extra Cement, Complete All As Specified And As Directed 119 Forming Construction Joint 30Mm Deep X 10Mm Wide Filled With Sealing Compound Of Grade A, Complete All As Specified And As Direceted. 120 M&L 75 Mm Thick Plain Cement Concrete 1:3:6 Type C2 Using 20Mm Graded Stone Aggregate As Inplinth Protection Etc., Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 121 Complete Removing Of Plants Including Roots By Dismantling / Cuttings Etc. Of Brick Work / Pcc / Rcc Including Necessary Scaffolding, Any Type, Any Location / Height ( I.E Roof, Parapet Walls Near Pipes Etc. ) And Applying Conc Acid After Removing Roots For Preventing The Regrowthing And Making Good The Disturbed Portion Using Pcc 1:2:4 Type B-O And Plaster In Cm 1:3 ( Size Of Disturbed Portion 150 X 150 X 150Mm ) Complete All As Specified & Directed By Engr- In -Charge. 122 M&L For Cleaning The Spalled Concrete Covers, Exposed Reinforced Corroded Bars With Water And Applying Two Coats Of Zinc Rich Anti Corrosive Coat On Bars And Then Replaster The Same With Cement Mortar 1:4 Of Average Thickness Of 40Mm, All Around With Wpc On Ceilings & Soffits Of Stair Case Waist Slab, Beams Ofconcrete Surfacesat Any Height With Neccesary Scafoldings, Finished Even And Smooth Without Using Extra Cement With Necessary Bonding Agent As Directed. Make: Build Core Chemicals, Stp Limited, Dr.Fixit Or Equivalent Approved By Ge. 123 M&L For Taking Down Existing Pointing Of Any Description Including Racking Out Joints, Hacking For Keys, Scrubbing Down With Water And Providing Raised Pointing To Old Stone Walls Surfaces Of Any Description, With Necessary Scaffoldings, By Using Cement Mortar 1:3 Complete All As Specified And As Directed. 124 M&L In Repair Second Class Hard-Wood In Scantlings, Clean Sawn, Fixed To Existing Chowkats Or To Walls, Complete All As Specified And As Directed 125 M&L For Second Class Hardwood Plain Fillets In Cub Boards, Shelves, Etc Exc 13 & N. Exc 25 Sq. Cm, Square, Rectangular Or Triangular In Section, Clean Sawn, Secured With Nails Or Brads, , Complete All As Specified And As Directed 126 M&L For Second Class Hardwood Plain Fillets In Cub Boards, Shelves, Etc Exc 6 & N Exc 13 Sq. Cm, Square, Rectangular Or Triangular In Section, Clean Sawn, Secured With Nails Or Brads, , Complete All As Specified And As Directed 127 M&L 18Mm Thick Marine Plywood Of First Grade , Fixed With Screws As In Cupboards, Sides Of Shelves, Partitions And In Simillar Works, All As Specified And As Directed.. 128 M&L 12Mm Thick Marine Plywood Of First Grade , Fixed With Screws As In Cupboards, Sides Of Shelves, Partitions And In Simillar Works, All As Specified And As Directed.. 129 M&L For 0.9 Mm Thick Decorative Laminated Sheet Type 1 Of Surface Finish Coloured Andpattern As Approved And Fixed Over Plywood With Approved Adhesive All As Specified. 130 M&L For External Teak Wood Lipping, 6Mm Thick, Fixed With Nails 19Mm Wide.Complete All As Specified And As Directed 131 S&F Brass Continuous ( Piano ) Hinges, Width Of Flap 30Mm Bright Finish Or Electrogalvanised, All As Specified And As Dierected. 132 Supply And Fix 100Mm Long Extruded Aluminium Alloy Handles, Cast Type Anodised Complete All As Specified And As Directed. 133 S&F In Repairs Of 100Mm Aluminium Anodised Hasp And Staple, Safty Type, With Hinge Pin Including Bolt To Hinge Plate And Fixed With Screws Etc Complete All As Specified And As Directed. 134 S&F Tower Bolt 100Mm Long, Extruded Aluminium Anodised Complete All As Specified And As Directed. 135 Excavating In Trenches N. Exc 1.5 M Width And N. Exc 1.5 M In Depth For Foundation Or Cesspits , Manholes , Pier Holes Etc N Exc 10 Sqm On Plan And N Exc 1.5 M In Depth Orgetting Out Soft / Loose Soil, Complete All As Specified And As Directed. 136 Demolition And Breaking Up Drain / Sewage Pipes 150 Mm Dia, ( Salt Glazed Ware, Ac Or Reinforced Concrete ) Set In Concrete Mortar, Complete All As Specified And Directed. 137 Cutting Holes Into Or Through Stone Wall Built In Cement Mortar Or Cement Lime Mortar And Walls Of Cement Concrete, Of Superficial Area Exc 400 Sq. Cm But N. Exc. 0.10 Sqm, Complete All As Specified And Directed. 138 Returning Filling In , Including Spreading , Levelling, Watering And Well Ramming In Layers N Exc 25 Cm In Soft / Loose Soil, Complete All As Specified And As Directed. 139 Removing Excavatedmaterialto A Distance Exc 1.50 Km But N Exc 5 Km Distance And Depositing Where Directed At A Level N.Exc 1.5Mm Abovethe Starting Pointcomplete All As Specified And As Directed. 140 M&L For Pcc 1:4:8, Type D-2 ( Using 40Mm Graded Stone Aggregate ) For Concrete Bed Of 10Cm Thick, To Drain Pipes Of 150 Mm Dia, Including Packing Under, And Hunching Against The Sides Of Pipes After They Are Laid And Tested, Complete All As Specified And As Directed. 141 M&L For 150 Mm Dia Pipe ( Grade ‘A’ Pipe ) Salt Glazed Stone Ware Drain Pipes Laid In Trenches And Jointed In Cm 1:3 Complete All As Specified And Directed. 142 Cutting Into Existing Manholes For Connecting New Drain Of 150 Mm Dia, Making Good To Pipes And Rendering, Cutting Out Existing Benching For And Forming Branch Channel ( 1 / 2 Round Or 3 / 4 Section ) In Cement Concrete 1:2:4 Type B-1, Smooth Finished, And Reforming Benching As Required, Complete All As Specified And As Directed. 143 M&Lproviding Precast Cement Concrete Type B1 1:2:4 ( 20 Mm Graded Aggregate ) In Landing, Cover Slabs Manholes, Chullah Hoods , Chajjas , Water Troughs , Shelves And Similar Articles With Plain Faces Set In Cement Mortar 1:4, Complete All As Specified And Directed. Note: Reinforcement Shall Be Measured Sepreatly 144 S&F Mild Steel Tmt Bar 6Mm To 8Mm Dia, Cut To Length , Bent To Shape As Required, Including Cranking, Bendingspirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9 Mm Dia.Complete All As Specified And Directed. 145 Taking Down The Unserviceablepoint Wiring ( Light, Fan, Socket Or Power ) Complete With Fittings Such As Switches, Sockets Ceiling Roses Pendent Regulators, Sockets Etc Any Light Points And Making Good Disturbed Surfaces Of Walls And Floorscomplete All As Specified And Directed. 146 Taking Down Unserviceable Mcbs, Dbs, Main Switches Complete All As Specified And Directed. 147 Removing The Existing Metering Board Panel From Theexisting Wall After Removing The Existing Serviceable Electric Metersall As Specified And Directed.Note- Serviceable Electric Meter To Be Fixed In The New Panel Board. Item No- 148 148 Supply, Installation, Testing & Commissioning Of Indoor Type, Wall Mounted ( With Bolts And Nuts ) Meter Cabinet Of Size 1.5X1.2X0.2Mtr And Made Out Of 2Mm Thick Crca Ms Sheet With Front Door Having Glass Window For Viewing Kwh Meter And Other Doors Shall Be Opaque. All Door Sholud Have Neaprene Rubber Gasket And Locking Arrangements. The Cabinet Shall Be Painted Both Internally And Externally With Powder Coated Paint ( Shade : Ral 7032 Siemens Grey ) . The Cabinet Shall Be Dust And Vermin Proof With Degree Of Protection Ip 43. The Cabinet Shall Be Comprising With The Following Accessories:- 149 ( A ) Four Pole Mccb, 100Amps With Breaking Capacity Of 16Ka Having Adustable Thermal And Fixed Magnetic Release. ( B ) Aluminium Bus Bars For 3-Phase & Nuetral Of Current Carying Capacity Up To 200Amps Dully Mounted On Frp / Dmc Insulators And Necessary Drillingfor Connections And Duly Covered With Heat Shrinkable Pvc Sleeves Of Standard Colour Code. ( C ) Mcb Spn 32Amps, 10Ka - 5Nos. ( 04Nos For Meters, 01 For Spare ) ( D ) Mcb Spn 10Amps-01 ( 1 For Security Lights & Stair Case ) ( E ) Analog Type Timer Up To 10Amps Capacity Single Phase 230Voltage For Building Security Lights & Common Lights ( F ) Two Way Bakelite Connector With Nut, Bolts And Wahsers Suitable For Connecting The Outgoing Wires In The Cabinet - 6Nos ( G ) Fixing Of Old Serviceable Electric Meters Obtained From The Old Meter Panel Board. ( H ) Internal Wiring Of Meters / Mcb / Cable Connector Shall Be Carried Out With10sqmm Copper Conductor Unsheathed, Multistranded, Pvc Insulated, 1100Volts Grade, Single Core Cable Of Standard Colour Code For Phase & Neutral Including Necessary Lugs / Nuts / Bolts / Washers Etc. ( J ) Led Phase Indicating Lamps ( Ryb ) With Control Mcb ( Sp-2Amps ) - 3Nos.Taking Down Ceiling Fan / Exhaust Fan, Dismantling Blades And Removing Fan And Refixing Ceiling Fan / Exhaust Fan After Completion Of Re-Wiring And Connecting Up By Cleaning / Oiling Etc Including Provision Of 3Core Flexible Round Cable From Ceiling Rose Or Connector To Fan All As Directed. 150 Taking Down Ceiling Fan / Exhaust Fan, Dismantling Blades And Removing Fan And Refixing Ceiling Fan / Exhaust Fan After Completion Of Re-Wiring And Connecting Up By Cleaning / Oiling Etc Including Provision Of 3Core Flexible Round Cable From Ceiling Rose Or Connector To Fan All As Directed. 151 M&L For Point Wiring With 1.5 Sqmm Copper Conductor Unsheathed, Multistranded, Pvc Insulated, 1100Volts Grade, Single Core Cable With Earth Continuity Conductor Of 1.5 Sqmm Pvc Insulated Copper Conductor And Including Rigid Pvccondit Or Pvc Conduits / Casing Caping Of Suitable Size Withaccessories Fixed Orconsealed In Stone Walletc., Including Terminal Boxes Made Out Of 1.2Mm Thick Ms Sheet For Switches, Fan Regulators Socket Outlet Etc Along-With 3Mm Thick Top Laminated Bakelite Sheet For Housing Switches, Sockets, Regulators Etcfor One Light Point Controlled By One One Way 5 Amps Switch 152 Note ( I ) : Necessary Pvc Rigid Junction Boxes For Identifying Junction As Required On Site / Directed By Engr-In-Charge For Point Wiring Work With Pvc Dummy Plates Shall Deemed To Be Included In The Quoted Rate. 153 ( Ii ) Same Size Wire Shall Be Used For Phase, Neutral & Earth Conductor 154 ( Iii ) The Wiring Shall Be Done Strictly By Following Proper Colour Coding Using Red, Yellow And Blue For Phase, Black For Neutral And Green For Earth Leads. 155 All As Per Item No 151 Above But One Light Point Controlled By Two, Two Way 5 Amps Switch 156 All As Per Item No151above But One Ceiling Fan / Exhaust Fan Point Controlled By One 5 Amps Switch 157 All As Per Item No 151Above But Socket 5 Amp On Independent Board. 158 All As Per Item No 151 Above But One 3 / 5 Pin Socket Out Let5 Amp On Same Board With Other Switches. 159 All As Per Item No 151 Above But One Bell / Buzzer Controlled By One 5 Amps Push Button Switch. 160 All As Per Item No 151 Above Butwiring With 2.5 Sq Mm Copper Cable With 2.5 Sq Mm For One Earth Continuitycablefor 6 Pin 15 Amps Socket Out Controlled By 15 Amps Switch.Complete All As Specified And As Directed. 161 Supply And Fixswitch Socket Combination 5 A / 15 Amps 5 In 1, Multipurpose Flush Type, Isi Markedcomplete All As Specified And As Directed. 162 Supply And Fixswitch Socket Combination 2 In 1, 5 Pin 5 Amps, Multipurpose Flush Type, Isi Markedcomplete All As Specified And As Directed. 163 Supply & Fixing Socket Outlet 3 / 5 Pin 5 Amp Flush Type Isi Markedcomplete All As Specified And As Directed. 164 Supply And Fixswitch Piano Flush Type, Single Pole, One Way, 5 Amps, 230 Volts, Isi Markedcomplete All As Specified And As Directed. 165 Supply And Fixswitch Piano Flush Type, Single Pole, Two Way, 5 Amps, 230 Volts, Isi Marked Complete.Isi Markedcomplete All As Specified And As Directed. 166 Supply And Fixbell Push , 5 Amps, 230 Volts, Isi Markedcomplete All As Specified And As Directed. 167 S&F Ceiling Rose, Three Terminal, Pvc / Polycarbonate, Isolated Body, Isi Markedcomplete All As Specified And As Directed. 168 Supply And Fix Bell Multi Music Type Ac 230 V Complete All As Specified And As Directed. 169 S & F Stepped Type Electronic Fan Regulator Flush Type All As Specified And As Directed. 170 Supply & Fixing Angle Holder / Batten Holder Insulated Complete All As Specified And As Directed. 171 S&F Surface Mounting / Wall Mounted Led Tube Light Fitting 1X18 To 20Wattshigh Efficiency, Anti Glare, Maintenance Free Operation Including Led Driver And Mounting Arrangements, All Accessories Internally Pre-Wired, Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable White Colour With Suitable Size All As Specified And Directed By Engineer-In-Charge. 172 S&F Surface Mounting / Wall Mounted Led Tube Light Fitting 1X10wattshigh Efficiency, Anti Glare, Maintenance Free Operation Including Led Driver And Mounting Arrangements, All Accessories Internally Pre-Wired, Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable White Colour With Suitable Size All As Specified And Directed By Engineer-In-Charge. 173 Supply & Fixing 1X10w Led Bulkhead Fitting Housing With High Pressure Die Cast Alluminium, Poly Carbonate Front Diffuser Cover Including Led Driver, Lamp Andall Accessories Internally Pre-Wired, Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable White Colour With Suitable Size Including Taking Out Old Unserviceable One Complete All As Specified And Directed By Engineer-In-Charge. 174 Supply And Fix Gi Pipe Light Grade Brackets 40 Mm Dia, 1.5 M Long Bent To Shape As Required And Fixed With Suitable Size Of 02 Nos Ms Clamps Made Out Of Flat 25Mm X 4Mm Duly Drilled With Nuts, Bolts, Washers Etc., To Poles / Walls Complete All As Directed. 175 Supply And Fixled Street Light Fitting 1 X 30 Watt Led Pressure Die Cast Aluminum Housing Heat Resistant Toughened Glass With Frame , Ip - 66 Protection, Uniform Distribution Make:-Cromptoncat Part No:- Lsto-30-Cdl Or Equvalent ( Suitable For 40 Mm Outer Dia G I Pipe ) And Connecting Up .Complete All As Specified And As Directed. 176 M&L For Sub Main Wiring Pvc Insulated Cable 2 Single Core 10Sq Mm 1100 V Grade ( Nominal Area ) Single Core Pvc Insulated Unsheathed Cable Multi-Stranded Copper Conductor Drawn Through And Including Medium Grade, Rigid Non-Metallic Pvc Conduit / Casing & Capping Of Suitable Size With All Necessary Fittings, Concealed In Walls / Roof / Floor Duly Earthed With One Run Of Single Core Cable Of Same Size But Green In Colour As Continuous Earthing Wire And Connecting To Common Earth Dolly Complete And After Taking Out The Existing Sub-Main Wiringetc. Complete All As Specified And Directed By Engineer-In-Charge. 177 Note ( I ) : Necessary Pvc Rigid Junction Boxes For Identifying Junction As Required On Site / Directed By Engr-In-Charge For Point Wiring Work With Pvc Dummy Plates Shall Deemed To Be Included In The Quoted Rate. 178 ( Ii ) Three Runs Of Cable And One Run Of Conduit With Necessary Accessories Will Be Measured As One Unit Length. 179 ( Iii ) The Wiring Shall Be Done Strictly By Following Proper Colour Coding Using Red, Yellow And Blue For Phase, Black For Neutral And Green For Earth Leads. 180 M&L For Sub Main Wiring Pvc Insulated Cable 2 Single Core 6Sq Mm 1100 V Grade ( Nominal Area ) Single Core Pvc Insulated Unsheathed Cable Multi-Stranded Copper Conductor Drawn Through And Including Medium Grade, Rigid Non-Metallic Pvc Conduit / Casing & Capping Of Suitable Size With All Necessary Fittings, Concealed In Walls / Roof / Floor Duly Earthed With One Run Of Single Core Cable Of Same Size But Green In Colour As Continuous Earthing Wire And Connecting To Common Earth Dolly Complete And After Taking Out The Existing Sub-Main Wiringetc. Complete All As Specified And Directed By Engineer-In-Charge. 181 Note ( I ) : Necessary Pvc Rigid Junction Boxes For Identifying Junction As Required On Site / Directed By Engr-In-Charge For Point Wiring Work With Pvc Dummy Plates Shall Deemed To Be Included In The Quoted Rate. 182 ( Ii ) Three Runs Of Cable And One Run Of Conduit With Necessary Accessories Will Be Measured As One Unit Length. 183 ( Iii ) The Wiring Shall Be Done Strictly By Following Proper Colour Coding Using Red, Yellow And Blue For Phase, Black For Neutral And Green For Earth Leads. 184 M&L For Sub Main Wiring With Two Runs Of 1.5Sq Mm 1100 V Grade ( Nominal Area ) Single Core Pvc Insulated Unsheathed Cable Multi-Stranded Copper Conductor Drawn Through Medium Grade, Rigid Non-Metallic Pvc Conduit / Casing & Caping ( As Per Site Requirement ) Of Suitable Sizewith All Necessary Fittings, Surface In Walls / Roof / Floor Duly Earthed With One Run Of Single Core Cable Of Same Size But Green In Colour As Continuous Earthing Wire And Connecting To Common Earth Dolly Complete All As Specified And Directed By Engineer-In-Charge. ( For Bldg Security Light ) 185 Note:- ( I ) Necessary Pvc Dummy Plates & Pvc Rigid Junction Boxes For Identifying Junction As Required On Site / Directed By Engr-In-Charge Shall Deemed To Be Included In The Quoted Rate. 186 ( Ii ) The Wiring Shall Be Done Strictly By Following Proper Colour Coding Using Red, Yellow And Blue For Phase, Black For Neutral And Green For Earth Leads. 187 ( Iii ) Three Runs Of Cable And One Run Of Pvc Conduit / Casing Caping Will Be Measured As One Uint. 188 Supply And Fix Sheet Metal Enclosure Single Door Mcb Db2 Way With 240V Rated Without Busbar Complete All As Specified And Directed By Engineer-In-Charge. 189 Supply And Fix Sheet Metal Enclosure Double Door Mcb Db Spn 8 Way With 100 A Rated Bus Bar & Neutral Link Complete All As Specified And Directed By Engineer-In-Charge. 190 S & F Mcb Spn 6 To 32A, 10 Ka Rupturing Capacity Complete All As Specified And Directed By Engineer-In-Charge. 191 S & F Mcb Sp 6 To 32A 10 Ka Rupturing Capacity Complete All As Specified And Directed By Engineer-In-Charge. 192 M&L For Earthing Complete With Gi Earth Plate Electrode Of Size 600X600x6.6 Mm Thick Buried Directly In Ground With Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level With Top Edge Of Plate Not Less Than 1.5 Meter Below Normal Ground Level Connected To Gi Wire 4 Mm Dia Earth Lead By Means Of Nuts, Bolts, Check Nuts, Washers Of Galvanised Iron As Steel, Protected By Galvanized Iron Pipe 40Mm Bore ( Medium Grade ) Allas Directed Including Cement Concrete ( 1:3:6 ) Type C-1 Earth Pit With Precast Rcc ( 1:1.5:3 ) Type A-1 Cover Slab Of Size 42 X 42 X10cm Thick Reinforced With 8Mm Dia Tmt Bars @ 15 Cm C / C Both Ways With 10Mm Dia Mild Steel Round Bar Of 30 Cm Long, Bent To Shape As Lifting Handle, Funnel, Wire Mesh, 20 Mm Bore Galvanized Iron Pipe ( Medium Grade ) For Watering, Earth Testing Point, Charcoal Or Coke And Salt In Alternate Layers With Necessary Earth Work In Soft / Loose Soil Complete All As Shown In Electrical Plate No 3 Of Ssr Part I Including Testing On Completion All Complete As Specified And Directed After Taking Down Old Earthing. ( Gi Wire Upto 7.5M Including Testing Consider In This Item ) . 193 Note: ( I ) Cost Of Gi Earth Wire And Gi Protection Pipe Upto 7.5Mtr Length Shall Be Deemed To Be Included In The Rate Quoted For This Item. ( Ii ) The Unit Rate Shall Also Includes For Wire Mesh, Funnel, Excavation, Returninng & Filling, Pcc Chamber Pit, Rcc Cover & Test Point ( Iii ) Pcc Pit Shall Be Provided At Least 500Mm Away From The Earth Pit And Not Just On The Earth Pit 194 M & L Sand Covering / Cushioning For Underground Cable Protection All As Specified In Ssr Part- I And Punning Down Complete All As Specified And Directed By Engineer-In-Charge.Note: Punned Thickness Shall Be Measured 195 M&Lfor Burntbricks Sub ClassB Laid Perpendicularover & Cushioning For Cable Protectioncomplete All As Specified & Directed At Site By The Engr- In Charge. 196 Supply And Lay Lt Ug Cable, Xlpe Insulated Armoured, Heavy Dutyaluminium Conductor Multistranded, 1100Volts Grade, Of 16Sqmm X 4Core Cross Sectional Area Laid In Trenches / Fixing On Walls / Poles Or Passing Through Gi Pipe Including Connecting Up With Suaitable Lugs, Nuts And Bolts Wherever Required And Testing Complete All As Specified. 197 Supply And Fix Cable Gland Double Compression Type, Weather Proof For 4Core 16Sqmm Armoured Cable Complete All As Specifed And Directed By Enginner-In-Charge. 198 Taking Out Old Unserviceable Cable, Lt 1100V 10Sqmm 2 Core From The Trench After Taking Necessary Shutdown From The Oh Lt Supply And Making Good The Disturbed Surfaces As Per Existing Complete All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
12.
Defence #10565821 Price Bid
Tender For Additional / Alternator To Certain Smqs At Red Qtrs ( Phase I ) And Special Repairs To Roof At Various Locations At Md Accommodation At Chaf Bangalore. 1 Taking Down Old Damaged Existing Water Proofing Membrane Of Any Thickness From Roof Top Complete All As Specified And Directed.Note: All Waste Materials Shall Be Removed From Mod Land During Or At The End Of Each Working Period At His Risk And Cost In Accordance With All Applicable Federal, State, And Local Regulations. 2 Taking Down Cement Or Cement Lime Plaster Any Description On Brick Or Stone Walls, Over Rcc Slab , Ceiling Etc Includingraking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. All As Specifiedincluding Necessary Scaffolding 3 M & L For Rendering 15 Mm Thick Cement Plaster 1:4 With And Including Water Proofing Compound @ 3% By Weight Of Cement Or As Per ManufactureS Instructionon Concrete Surfaces , Finished Even And Smooth Without Using Extra Cement All As Directed.All As Specified And As Directed. ( Note : Wpc Will Be Measured And Paid Seperately As Supply Only Under Relevant Item ) 4 Supply Only Integral Water Proofing Compound Complete All Asdirected. 5 M & Lpcc ( 1:2:4 ) Type B-0 ( Using 12.5 Mm Graded Stone Aggregate ) As In Roof / Chajja Padding Smooth Finish For Maintaining Roof / Chajja Slope Complete All As Specified And As Directed 6 M&L For Providing Cement Concrete Type B-0 ( 1:2:4 ) Using 12.5 Mm Graded Aggregate As In Roof Kerbs Or Mud Stops, Rounded Or Chamfered On Edges All As Specified. 7 M&L For Water Proofing Treatment On Horizontal And Vertical Surfaces With Providing And Laying / Fixing Tpo ( Thermoplastic Polyolefin ) Membraneinclcleaning The Surface And Laying Of 200Gsm Geo Textil And Cover Up With Tpo Rf 1.2 Mm Thermoplastic Membrane On Roof & Up To 300 Mm Of Parapets And Crumple Joint Including Junction Of Roof And Parapet, Welding The Seam Joints With Hot Airgun / Machine And Terminate The Corners With Extra Protection To Bear The High Wind Pressure. The Tpo Should Be Thoughroly Tightened With The Lower Structure Using Mechanical Fastening Properly To Avoid The Corners And Seam Joint Failure.Make :Asian Paints Tpo Or Equivalent Product Of M / S Bauchemic / Cipy / Sika / Pidilite / Dr Fixit To Membrane 8 M&L Cutting Out Cracks To V-Section In Existing Roofs Or Terracing, Cleaning Out, Wetting, Grouting With Cement And Sand Slurry 1:3 Complete All As Specified And As Directed 9 Demolition Of Cement Concrete In Floors And Pavings Not Exc 15Cm Thick Below Or Above Ground Level. 10 M&L For 75Mm Thick Cement Concretetype C-2, 1:3:6 ( 40 Mm Graded Aggregate ) As In Plinth Protection All As Specified. 11 Demolition Of Cement Concrete ( Unreinforced ) Of Any Description And In Any Position Not Otherwise Specifically Provided Forall As Specified And As Directed By Engr-In-Charge. 12 Demolition Of Cement Concrete Reinforced Of Any Description And In Any Position / Any Height Not Otherwise Specifically Provided Forall As Specified And As Directed By Engr-In-Charge. 13 Demolition Of Cement Concrete Reinforced Roofs, Floors ( Other Than Groundfloors ) , Beams, Staircases, Landing, Chajjas And Similar Suspendedwork All As Specified And As Directed By Engr-In-Charge. 14 Providing Precastcement Concrete Type B-1, 1:2:4 ( 20 Mm Graded Aggregate ) Set In Cement Mortar 1:6In Landings, Cover Slabs ( For Man Holes Etc. ) Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves And Similar Articles With Plain Faces 15 Providing Reinforced Cement Concrete Type B-1, 1:2:4 ( 20 Mm Graded Aggregate ) In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Likeincluding Necessary Form Work. 16 Providing Reinforced Cement Concrete Type B-1, 1:2:4 ( 20 Mm Graded Aggregate ) Chajjas Including Necessary Form Work. 17 Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips 18 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Works / Block Works Or Concrete Surfaces Cement Plaster 1:6 Finished Even And Smooth Without Using Extra Cement All As Directed.All As Specified And As Directed. 19 M&L For Preparing New Plastered Surfaces Of Wall And Applying Three Coats Of White Wash. 20 M&L For Preparing New Plastered On Wall And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Chalk Whiteneing Through Mechanical Means Complete All As Specified And Directed By Engr-In-Charge. 21 Rendering 10Mm Thick Cement Plaster In Cement Mortar 1:3, On Concrete Sufaces As In Ceiling / Chajja , Finished Even And Smooth Without Using Extra Cement. 22 M&L For Preparing New Plastered On Ceilingand Applying Three Coats Of White Wash. 23 M&L For Preparing New Plastered Surface On Ceiling And Applying Two Coats Of Distemper Through Mechanical Means Over A Coat Of Chalk Whiteneing Complete All As Specified And Directed By Engr-In-Charge. 24 M & L For Rendering 15 Mm Thick Cement Plaster 1:4 With And Including Water Proofing Compound @ 3% By Weight Of Cement Or As Per ManufactureS Instructionon Stone Masonry Surface Finished Even And Smooth Without Using Extra Cement All As Directed All As Specified And As Directed. ( Note : Wpc Will Be Measured And Paid Seperately As Supply Only Under Relevant Item ) 25 Preparation Ofnew Plastered Surfaces Of Walland Apply Two Coat Ofweather Proof Exterior Emulsion Through Mechanical Means Over A Coat Of Primer All As Specified And As Directed 26 M&Lfor Preparation Of New Plastered Surfaces Of Wall And Applied Two Coats Ofcement Base Paint Through Mechanical Means Over A Coat Of Primer Completeincluding Necessary Scaffolding All As Directed. ( Ground Floor To 3Rd Floor ) . 27 M&L Complete Removal Of Existing Treatment On Wallsand Preparation Of Surface Making Smooth And Applying Two Coats Ofcement Base Paint Through Mechanical Means Over A Coat Of Primer Completeincluding Necessary Scaffolding All As Directed. ( Ground Floor To 3Rd Floor ) . 28 Disconnecting Existing Tanks, Setting Aside Or Lowering Ifrequired ) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Old Or New Location Position . After Cleaning Repairing And Removing All Scale Dirtand Wiping , Drying Etc Complete Capacityn Exc 500 Ltr Complete All As Specified 29 S&F Trible Layered Rotational Moulded Polyethylene Water Storage Tanks ( Cylindrical Vertical With Closed Top ) Hoisted & Fixed In Position All As Specified In Ssr Part I , 500 Ltrs Capacity Including Dismantling Existing 500 Ltr Water Tanks Complete All As Specified And As Directed. 30 S&F Ballvalves, 20Mm Diabore High Pressure, Of Ptmt With Epoxy Coated Aluminium Rod&High Density Plastic Ball Screwed For Iron Pipe And Fixed. 31 S&Fin Repair Ballvalves, 20Mm Diabore High Pressure, Of Ptmt With Epoxy Coated Aluminium Rod&High Density Plastic Ball Screwed For Iron Pipe And Fixed. 32 Demolition Of Brick Work / Pcc Block Masonry Or Stone Masonry Built In Cement Mortar Including All Quoins, Arches, Pillars Etc., Butexcluding Ashlar Facing Dressed Stone Works And Pre-Cast Concrete Articles Complete All Asdirected. 33 M&L Brick Work With Sub Clam ‘B’ Brick Straight Or Curved On Plan Exe. 6 Meters Mean Redius Built In Cement Mortar 1:6 Complete All As Specified And As Directed. 34 Pre-Cast Cement Concrete Block In Pcc 1:3:6 Type C1 ( 20Mm Graded Aggregate ) Masonry With Solid Blocks, Exc. 10Cm In Width And Setting In Mortar 1:6 Completeall As Specified And As Directed 35 S&F In Repairs 20Mm Dia Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed. 36 S&F In Repairs 25Mm Dia Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed. 37 Dismantling Floor Hearth Or Wall Tiling Including Cement Morter Bedding Andbacking Coat Plastering Of Any Thckness Removing Serviceable Tiles To Store And Rubbish Off Premises Etc Complete All As Specified And As Directed. 38 M&L Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Laid Over 15Mm Thick Screed Bed Or Bedding In Cm 1:6 Complete All As Specified And Directed. 39 M&L Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Laid Over 15Mm Thick Screed Bed Or Bedding In Cm 1:6 Complete All As Specified And Directed. 40 M&L For Glazed Ceramic Tiles Coloured Of Size 450X 300X 7Mm Thick As Vertical Sruface Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement Mixed With Pigment To Match The Shade Of The Tiles Complete All As Specifiedc And As Directed With 10 Mm Th Rendering 1:4 For Laying Wall Finishes Complete All As Specified And As Directed. 41 M&L For Pcc 1:5:10 Type E-2 ( Using 40Mm Graded Aggregate ) As In Filling In Sunken Slab Complete. 42 M&L For Providing Water Proofing Treatment To Sunken Floor Complete All As Per Following Specification:-Providing 20Mm Thick Cement Plaster In Cement Mortar 1:3 In Mixed With Pidi Proof Lw Or Dr Fixit @ 200 Ml Per 50Kg Of Cement And Finished Even And Smooth Surface Without Using Extra Cement.Note : Wpc Shall Measured And Paid Saperately 43 Application Of Two Coats Of Pidifin 2K Water Proof Coating I.E Proof Coat Of Pidilite @ Approx 1.00 Kg Per Sqm As Per Manufactures Instructions. Note :- ( I ) The Rate Includes For Preparation Of Surface Treatment And Sealing Of All Joints, Cracks, Corners And Junction Of Pipes Etc And Ponding Test Complete All As Specified And Directed By Engineer-In-Charge . ( Ii ) Pcc Filling Shall Be Measured And Paid Separately. ( Iii ) Water Testing Of Sunken Floor Shall Be Carried As Per Direction Of Ge & Rates Quoted By The Tenderer Shall Be Deemed Inclusive Of Expdr Incurred On Testing. 44 S&F In Repairs Vitreous China Wash Down Watercloset Pan ( Pedestal Pattern ) , White With P Or S Trap, Including Provision Of Fixing Bolts And Connecting Upto Drain And Flushing Pipe Etc. Complete. 45 Supply Only Plastic Water Closet Seat, White, Closed Pattern With Flat Bottom And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device ( Fixing Include In Item Above ) . 46 Supply Only Pvc Flushing Cistern With Flush Out Valve Type, 10 Ltrs Capacity, Low Level White With Inlet Ball Valve, Float And Handle Including Bracket Including Flush Pipe Complete ( Fixing Include In Item No 76 & 77 ) . 47 S&F In Repair Pvc Connection Pipe 450Mm Long 15Mm Dia Both End Having Brass Coupling Nut And Pvc Washer Complete All As Specified And Directed By Engr-In Charge.. 48 S& F In Repair Health Faucet ( Abs Body ) Mild Steel Chromium Plated Suitable For 15Mm Dia Pipe With 1 M Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect Asspecified And Directed. Cera - F8030104 Or Equivalent 49 S&F In Repair Bib Taps, Fancy Type With Long Neck Chromium Plated With Crutch Or Butterfly Hadle Screwed Down Screwed For Iron Pipe Or Brass Ferule Of 15Mm Bore Complete All As Specified And As Directed. 50 S&F In Repairs 15Mm Two In One Bib Taps, Chromium Plated, Fancy Type, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule And Fixed All As Specified. ( Make: Jaquar Cat No.Fon-40041 ) 51 Taking Up Or Down Steel Tubing / Cpvc Pipes And Connections, Fittings Etc Including Cleaning For Refixing Or Removal To Store For15mm Bore Complete All As Specifiedand As Directed. 52 Refixing Old Steel Tubing / Ld Cpvc Pipes15 Mm Dia And Connections In New Or Old Position ( Walls, Ceilng , Floors Etc ) 53 S&F Tubing, Medium Grade, 15Mm Bore With All Fittings Fixed To Walls And Ceiling Or Laid In Floors Including Cutting Through Walls And Floors Etc And Their Making Good Complete All As Specified And Directed. 54 Taking Up Or Down Steel Tubing / Cpvc Pipes And Connections, Fittings Etc Including Cleaning For Refixing Or Removal To Store For20 Mm Bore Complete All As Specifiedand As Directed. 55 Refixing Old Steel Tubing / Old Cpvc Pipes 20 Mm Bore And Connections In New Or Old Position ( Walls, Ceilng , Floors Etc ) 56 S&F Tubing, Medium Grade, 20Mm Bore With All Fittings Fixed To Walls And Ceiling Or Laid In Floors Including Cutting Through Walls And Floors Etc And Their Making Good Complete All As Specified And Directed. 57 Taking Up Or Down Steel Tubing / Cpvc Pipes And Connections, Fittings Etc Including Cleaning For Refixing Or Removal To Store For25 Mm Bore Complete All As Specifiedand As Directed. 58 Refixing Old Steel Tubing / Old Cpvc Pipes25 Mm Bore And Connections In New Or Old Position ( Walls, Ceilng , Floors Etc ) ( Ground Floor To Seventh Floor ) . 59 S&F Tubing, Medium Grade, 25Mm Bore With All Fittings Fixed To Walls And Ceiling Or Laid In Floors Including Cutting Through Walls And Floors Etc And Their Making Good Complete All As Specified And Directed. 60 Cutting Chases Pinning In Making Good For Stone Concete Block Or Slab Walls To Facing Where Required And Pointing In Cement Mortor 1:3 To Ends Or Edges Of Concealed Water Tubing And Similar Work Including Making Good Cutting N Exc 10Cm Girth Complete All As Specified And Directed. 61 S&Fin Repairs 15 Mm Bore Fancy Type, Chromium Platedstop Valves / Angle Cock Screwed Down High Pressure With Crutchhandle Screwed Both Ends For Iron Pipe Or For Unions All As Specifed And Directed. 62 S&Fin Repairs 15 Mm Bore Fancy Type, Chromium Plated With Long Shunk And Cup ( Concealed Type ) Stop Valves / Angle Cock Screwed Down High Pressure With Crutchhandle Screwed Both Ends For Iron Pipe Or For Unions All As Specifed And Directed. 63 Dismantling Of Pvcdrain Pipes Of 75 / 100 / 110Mm Bore, Including All Fittings, Jointed In Cement Mortar And Taking Out Of Trenches, If Required And Removing From Site Of Work Complete All As Directed. 64 S&F Pvc ( Swr ) Pipes Single Socketed 110 Mm Bore In Any Length With Rubber Ring Joints Fixed To Walls Complete All As Specified And Directed. 65 S&F Pvc ( Swr ) Pipes Single Socketed 110 Mm Bore In Any Length With Rubber Ring Joints Laid In Floor Complete All As Specified And Directed. 66 S&F Pvc ( Swr ) Bend Withaccess Door110 Mm Bore Complete All As Specified And Directed. 67 S&F Pvc ( Swr ) Bend110 Mm Bore Complete All As Specified And Directed. 68 S&F Pvc ( Swr ) Double ( Double Y ) Branch Piece, With Access Door110 Mm Bore.Equal Or Unequal Complete All As Specified And Directed. 69 S&F Pvc ( Swr ) Branch Piece Single ( Single Y ) Equal Or Unequal With Access Door 110Mm Bore Complete All As Specified And Directed. 70 S&F Pvc ( Swr ) 110Mm Bore Vent Cowl Complete All As Specified And Directed. 71 S&F In Repairs Pvc ( Swr ) Gully Trap 125 / 110 Mm, Setting And Jointing With Solvent Cement Etc Complete All As Specified And As Directed 72 S&F In Repair Pvc ( Swr ) Floor Trap 110 Mm Dia, Plain With Grating Including Jointing With Solvent Cement Complete All As Specified And Directed By Engr-In Charge. 73 S&F Pvc ( Swr ) Pipes Single Socketed 75 Mm Bore In Any Length With Rubber Ring Joints Fixed To Walls Complete All As Specified And Directed. 74 S&F Pvc ( Swr ) Pipes Single Socketed 75 Mm Bore In Any Length With Rubber Ring Joints Laid In Floors Complete All As Specified And Directed. 75 S&F Pvc ( Swr ) 75Mm Bore Bends Any Radius Withaccess Door Complete All As Specified And Directed. 76 S&F Pvc ( Swr ) 75Mm Bore Bends Any Radius Complete All As Specified And Directed. 77 S&F Pvc ( Swr ) Junction Single ( Single T ) Equal Or Unequal With Access Door 75Mm Bore Complete All As Specified And Directed Complete All As Specified And Directed. 78 S&F Pvc ( Swr ) 75Mm Bore Vent Cowl Complete All As Specified And Directed. 79 S&F Pvc ( Swr ) Branch Piece Single ( Single Y ) Equal Or Unequal With Access Door 75Mm Bore Complete All As Specified And Directed. 80 S&F In Repair Pvc ( Swr ) Floor Trap 75Mm Dia, Plain With Grating Including Jointing With Solvent Cement Complete All As Specified And Directed By Engr-In Charge. 81 Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Including Small Tree Roots And Drain / Sewage Pipes Lines Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out Any Type Of Soil. 82 M & L Cement Concrete Type D21:4:8 ( 40 Mm Graded Aggregate ) In Foundations, Filling And Mass Concrete 83 M & L For Concrete Bed To Drain Pipes Including Packing Under, And Haunching Against The Sides Of Pipes After They Are Laid And Tested; Incement Concrete1:3:6 Type C-2 ( Using 40 Mm Graded Stone Aggregate ) . 84 S & F Reinforced Concrete Pipes, Bore Of Pipe In Mm Class Np2, Laid And Jointed Complete With Collars 85 S&Fin Reapir Stainless Steel Wire Cloth 0.56 Mm Nominal Dia Of Wiore And Average Width Of Aperturee 1.18 Mm And Fixed With Eads Or Stainless Steel Wwie Staples Complete All As Specified And As Directed By Engr-In-Charge. 86 Hacking Out Old Broken Glass ( Any Thickness , Size Quality Ordescription ) From Metal Frame Including Punching Or Drilling Out Old Glazing Pins / Spring Clips Glazed With Putty And Removing Materials From Site Of Work All As Directed By The Engineer-In-Charge. 87 Hacking Out Old Broken Glass ( Any Thickness , Size Quality Ordescription ) From Wooden Frames Or Stone, Concrete Or Brick Surrounds, Glazed With Puttyor Fixed With Beads And Removing Materials From Site Of Work All As Directed By The Engineer-In-Charge. 88 Bands, Straps, Supports Or Stays For Rainwater, Ventilating Pipes, Including Bolts, If Required: Hooks ( Stay ) , Heavy, For Large Gates; Hook And Pintle Hinges:Large Hasps And Staples; Chains; Hand Made Sliding Bolts; Clamps; Hold Fasts; Wall Ties; Hooks For Hanging Fans; Plain Angle Cleats For Securing Purlins To Woodtrusses Or Rafters; Knee Piece Inserts; Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165 89 Preparation Of Old Painted Wood And Wood Based Surfaces Of Any Description, Not Otherwise Descri-Bed, Over 10Cm Width Or Girt And Applying One Coat Of Synthetic Enamel Paint ( Ordinary Tint ) . 90 Preparation Of Old Painted Steel And Iron Surfaces Of Any Description, Not Otherwise Descri-Bed, Over 10Cm Width Or Girt And Applying One Coat Of Synthetic Enamel Paint ( Ordinary Tint ) . 91 Removing Demolished Material Ie Building Material Concrete Debrisof Any Type Etc To A Distance Of 30 Km Or Beyond Out Of Premises Of Metropolition Area Including Loading, Unloading By Manually Or By Mechanical Means ( Jcb And To Be Transported Through Trolly Or Tipper And Staking At The Destination As And When Directed By Engr-In-Charge During Execution. 92 M & L Rendering 10 Mm Thick Cement Plaster ( 1:3 ) On Roof Paddingfinished Even And Fair With Approved Water Proofing Compound @ 3% By Weight Of Cement Or As Per ManufactureS Instruction Including Taking Down Existing Cement Plaster / Lime Plaster All As Specified And As Directed. ( Note : Wpc Will Be Measured And Paid Seperately As Supply Only Under Relevant Item ) ( G+3 Bldgs ) 93 M & L 100 Mm Thick Cement Concrete Type B- 2, 1:2:4 ( 40Mm Graded Aggregate ) In Floor Finishesh And Paving And Finishing Cement Concrete Surface Even And Smooth Without Usingextra Cement. ( Over Roof Of 3Rd Floor ) . 94 Cutting Holes In Brickwalls Built In Cement Mortar Exc. Half Brick But Not Exc One Brick For Inserting Holdfasts , Clamp Etc And Making Good Dismantled Portion In Cement Mortar 1:3 Or Cement Concrete 1:2:4 Type B-1 As Required Complete All As Directed. ( Ground Floor To 3Rd Floor ) . 95 M&L Rendering 10Mm Thick Cement Plaster On Fair Faces Of Concrete Surfaces In Ceiling / Chajjas In Cement Motor 1:4 Finished Even And Smooth Without Using Extra Cement Completeincluding Necessary Scaffolding All As Specified And Directed Directed Up To To 3Rd Floor. 96 M&Lfor Preparation Of New Plastered Surfaces Of Wall And Applied Two Coats Ofcement Base Paint Through Mechanical Means Over A Coat Of Primer Completeincluding Necessary Scaffolding All As Directed. ( Ground Floor To 3Rd Floor ) . 97 Preparation Ofnew Plastered Surfaces Of Walland Apply Two Coat Ofweather Proof Exterior Emulsion Through Mechanical Means Over A Coat Of Primer All As Specified And As Directed. ( Ground Floor To 3Rd Floor ) . 98 S&Fin Repairsball Brass Valves, 20Mm Diabore High Pressure, With Polythene Float And Flynut Complete, Screwed For Iron Pipe Or Brass Ferrule All As Specified And Directed. ( Ground Floor To 3Rd Floor ) . 99 Disconnecting Existing Tanks, Setting Aside Or Lowering Ifrequired For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Old Or New Location Position Capacity Exc 250&N Exc 500 Ltr Complete All As Specified 100 Removing Building Materials Etc. ( Other Than Spoil Payable Under Items -Earthwork ) To A Distance Of 30.00 Km Or Above, Beyond The Lead Included In The Rates, Including Loading, Unloading And Stacking At The Destination All As Specified And As Directed. Note: All Debris And Rubbish Shall Be Removed From Mod Land During Or At The End Of Each Working Period At His Risk And Cost In Accordance With All Applicable Federal, State, And Local Regulations.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
14.
Water Resources and Irrigation #10029814 Technical Bid
CONSTRUCTION COMRED B.K.DESHMUKH UPSA SINCHAN YOJANA, KELUNGAN, TAL : AKOLA DIST : AHILYANAGAR-1 Pump House 2 Rising Main 3 Delivery Chamber 4 Distribution 5 Approach Road-Item No.1 :- Exavation in general in soft material comprising of soft soil, soft murrum,sand,hard murrum with boulders in wet or dry condition for Head WorksI.e. intake well, connecting pipeJack well,pump House, supply well etc.for lift all leadincluding barricading,gurading, depo- siting oft surplus excavated stuff within a excluding refilling.radius of 0.5km as directed by Engineer-in-charge-,etc complete Item No.2 :- Excavation in general in hard material comprisi- ng of soft rocks, hard rock,manjara rock etc.by blasting / controlled blasting ,chiselling as re- quired in wet or dry condition for head works I.e intake well connecting pipe, jack well ,pump house supply well, etc.for lift all lead including barricading,guarding despo- siting off surplus excavated stuff within a radius of 0.5 km as directed by Engineer -in-charge excluding refilling Item No.3 :- Providing & laying in situ Following grades of C.C. of trap/granite/quartzite/gneiss metal for foundation & bedding including dewatering from work, compacting & curing etc.complete. 1:2:4 M150 grade. (with 12 to 20 mm metal) Item No.4 :- Providing and casting in situ Cement Concrete of trap/ granite / quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer- in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) For all types of Columns Item No.5 :- Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) For Beams / Braces / Lintels Item No.6 :- Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Slabs / Landings / Vertical Walls / Waist Slabs / Steps for Staircase Item No.7 :- Providing & fixing in position steel bar reinforcment of various dia.for RCC pipes, caps, footings,foundation,slabs, beams, columns, canopies,staircases,newels chajjas, lintels,pard- ies copings fins, arches, etc. as per detailed design & drwaing & schedules, including cutting, bending,hooking the bars,binding with wire track welding & supporting as requaired,etc.complete a) R.C.C. Well Item No.8 :- Dewatering the excavated trenches & pools of water in the building trenches/pipeline trenches/ well works by using pump and other divices inclu. disposing off water to safe distance as directed by Engineer-in-charge (including cost of machi- nery,labour,fuel),etc.complete. Item No.9 :- Providing structural steel work in rolled stanchions fixed with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connecting to truss members and like as per detailed designs and drawings or as directed by Engineer-in-charge including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-3/275) Item No.10 :- Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc.complete.(Weight of 5.5 kg/sq.m.). Item No11 :- Providing structural steel work in single stanch- ions composed of RSJ,channel,etc.with caps, bases, mild steel plates,angles,brackets, cleats, gusset plates, anchor bolts, etc.as per detailed design & drawing or as directed by Engineer-in- charge including cutting, fabrication, hoisting erecting, fixig in position, making riverted / / bolted/ welded conections & one coat of anticorrosire paint over it two coats of oil painting etc. complet. Item No.12:- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Item No.13 :- Providing & fixing M.S. chaquerred plate flooring of following thikness suported on M.S.angles (25x25x8 mm size) including Welding, cutting & fabricating the plate to the required square or rounding shape making holes in the plates inclu. providing & applying three coats of anticorrosive paint, etc.complete as directed by Engineer-in- charge Item No.14 :- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) Item No.15 :- Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) Item No. 16 :- Providing sand faced plaster externally in cement mortar usingapproved screened sand, in all positions including base coat of 15 mmthick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete Item No.17 :- Providing & fixing in position C.I. Dapuri steps or 22 mm dia M.S. bar step with proper anchorage, etc. and providing and applying 3 caots of ant-corrosive paint, etc. complete as directed by Engineer-in-charge. Item No.18 :- Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Item No.19 :- Providing and fixing in position copper lightenig conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long with a knob at end and with conical spike at top, copper tape cond- uctor 20 x 3 mm size, copper earth plate of 3mm thick and 0.81 sqm in area, clams at 1 M center to center including necessary excanation, laying and fixing the conductor, providing and fixing 40 mm G.I.pipe upto 3 M hight from ground and 0.5 M below ground including making all connection, filling the earthing pit with charcoal, salt etc.and refilling and watering, etc.complete as per speci-fication laid down in relevent I.S. codes. Item No.20 :- Refilling the trenches with available excavated stuff with soft and hard material in 15 cm layers with all leads and lifts including consolidation surcharging etc. complete., Item No.21 :- Providing, erecting and commissioning single girderElectrically Operated Rectangular Over head Travelling Crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendant control block.10 Ton Capacity Item No.22 :- Providing ,Lowering,laying & jointing ISI standard R.C.C. pipes in standard lengths of following class & dia.Suitable for either collers joints or rubber ring joints including all taxes (Central & local) inspectioncharges transport to departmental stores/site unloading & stacking etc. complete. Item No.1 :- Excavation for deep trenches for laying rising main in Earth, Soil of all types, sand, gravel and soft murum including trimming to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same up to a distance of 15 metres and All leads as directed, preparing the bed for foundation and necessary safety precautions , keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications. (Payable measurements with vertical excavation) Item No.2:- Excavation for deep trenches for laying rising main in Hard murum, soft bhisa, hard man and boulder including trimming to correct line and level and to specified width, including removing the excavated material and stacking or spreading the same up to All Leads and lifts as directed, preparing the bed for foundation and necessary safety precautions , keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications.(Payable measurements with vertical excavation) Item No.3 :- Excavation for deep trenches for laying rising main in Soft Rock by crow bar and shavel including trimming to correct line and level and specified width including trimming and levelling the bed by chiselling, removing the excavated material and stacking the same up to All Leads and lifts as directed and safety precautions to keep the trench undisturbed pipe laying & fixing necessary specials etc complete as per detailed specifications.(Payable measurements with vertical excavation) Item No.4 :- Excavation for deep trenches for laying rising main in Hard Rock of any toughness by blasting to correct line and level and to specified width including trimming and levelling the bed as directed, removing the excavated material and sorting, stacking the same up to All Leads and lifts of directed, preparing the bed for foundation and keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications. (Payable measurements with vertical excavation) Item No.5 :- Backfilling the trenches in layers not exceeding 300 mm, each layer shall be consolidated by watering and ramming without disturbing the pipe line with excavated stuff as directed including breaking of clods of soil etc complete. (The backfilling on the two sides of the pipeline should be carried out simultaneously) Item No.6 :-Murum bedding in trenches with murum of approved quality in layers not exceeding 150 mm to 200 mm, each layer shall be consolidated by watering and ramming as directed etc complete. Item No 7 :- Providing & Erecting M.S. pipes made out of MS plate conforming to IS 2062:1992 including procurement of plates,gas cutting to required size, rolling, tack welding, assembling in suitable length s to form pipes on automatic welding machine and transportation up to 500m. The welding Shall be ERW/SAW using electrode shaving weld mark E7018 (Low Hydro genelectrodes) and forming V edge on both ends of pipes, Including third party inspection charges, lowering and laying to correct position on prepared bedding or on pedastals or chairs, field hydraulic testing at specified test pressure as per IS 5822:1994 sec11, field welding to join pipes after laying, Radiographic (5%) and ultrasonic (10%) testing of welds including all equipments submitting report, expert personnel required for testing, interpreting and submitting report along with developed film where applicable all incidental charges etc complete as per IS-3589:2001 and as per specifications Item No.8 :- Lowering, laying in position to correct line & level including M.S. pipes with / without any outcoating on prepared bedding or on pedaetals or chairs or upon prepared formation including loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation up to 500 m etc. completed as specified with all lead & lift etc. complete including field hydraulic testing at specified pressure and as per procedure mentioned in section 11 of IS 5822: 1994. (item to be used only in situations where pipes are already procured) Item No. 9 :- Providing & applying Liquid epoxy coating system to the interior surface of Rising Main Pipes as per Annex - B of IS 3589:2001, preferably by airless spray with one coat of Zinc rich epoxy primer (90% zink DFT 40 micron , coverage 9 Sqm / lit) and three coats of coal tar epoxy paint (DFT 120 X 3 micron coverage 5 Sqm/Lit/coat) including cleaning the surface to the satisfaction of Engineer in charge by sand blasting / chemical cleaning / scraping removing oil, grease, other foreign materials including all necessary material, labour with all leads and lifts etc. complete. Item No.10 :- Providing, supplying & erecting of approved make CI D/F reflux valves (non-returnvalves) of following dia with technical specifications as below i.Design,manfacturing & testing standard IS 5312 Part 1 Including transportation,inspection,unloding,loading,stacking excluding GST levied by GOI & GO Minall respectetc.complete.Reflux valves as per I.S.5312 Part I 1984)C.I.Sluice Valve MM Dia NRV 200 MM Dia NRV 250 MM Dia Item No.11 :- Providing, supplying & erecting of Kinetic Double Orifice type Air Valves confirming to IS 14845 & as per standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including transportation, inspection, unloding, loading, stacking excluding GST levied by GOI & GOM in all respect etc. complete C.I.Kinetic air Valve 50 MM dia Item No.12:- Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzit e/ graded metal for RCC works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls, road slabs trough ( Box Culvert ) trough for aqueduct, wearing coat,etc..with Batching Plant and Transitmixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed Item No.1 :- Excavation for deep trenches for laying rising main in earth, soil of all types, sand, graval and soft murum including trimming to correct line level and to specified widths including removing the excavated material and stacking or spreading the same up to distance All Leads. and all lifts as directed. preparing the bed for foundation and including necessary shoring and strutting to keep the trench undisturbed till pipe laying and fixing necessary specials etc. complete as per detailed specification. Item No.2:- Excavation for deep trenches for laying rising main in hard murum, soft bhisa, hard man and boulder including trimming to correct line level and to specified widths including removing the excavated material and stacking or spreading the same up to distance All Leads. and all lifts as directed preparing the bed for foundation and including necessary shoring and strutting to keep the trench undisturbed till pipe laying and fixing necessary specials etc. complete as per detailed specification. Item No.3 :- Excavation for deep trenches for laying rising main in soft rock by crow bar and shavel including trimming to correct line level and to specified widths including trimming and levelling the bed by chiselling. removing the excavated material and stacking or spreading the same up to distance All Leads. and all lifts as directed. preparing the bed for foundation and including necessary shoring and strutting to keep the trench undisturbed till pipe laying and fixing necessary specials etc. complete as per detailed specification. Item No.4 :- Excavation for deep trenches for laying rising main in Hard rock of any toughness by braker to correct line level and to specified widths including trimming and levelling the bed as directed . removing the excavated material and stacking or spreading the same up to distance All Leads. and all lifts as directed. preparing the bed for foundation and including necessary shoring and strutting to keep the trench undisturbed till pipe laying and fixing necessary specials etc. complete as per detailed specification. Item No.5 :- Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for foundation and bedding by Batching Plant & Transit Mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed Item No.6 :- Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzit e/ graded metal for RCC works of abutment, wing walls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls, road slabs trough ( Box Culvert ) trough for aqueduct, wearing coat,etc..with Batching Plant and Transitmixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed Item No.7 :- Providing and fixing in position TMT-FE- 500 bar reinforcement of various diameters for R.C.C.pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detail ed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tac k welding and supporting as required complete as directed. Item No.8 :- Providing B.B. masonary with conventional I.S. type bricks for super structure including striking joints, watering, centering, scaffolding with lift up to 1.50 m, including cost of material etc. complete as directed. Item No. 9 :- Providing sand faced plaster externally in cement mortar using Kharsalia / Kasaba or similar type of sand,in all positions including base coat of 15mm thick inC.M. 1:4 using waterproofing compound at1kg.per cement bagcuring the same for not less than 2 days and keeping thesurface of the base coat rough to receive the sand facedtreatment 6 to 8mm thick in C.M. 1:4finishing the surface bytaking out grains and curing forfourteen days scaffoldingetc.complete. Item No.10 :- Providing structural steel work in single stanch- ions composed of RSJ,channel,etc.with caps, bases, mild steel plates,angles,brackets, cleats, gusset plates, anchor bolts, etc.as per detailed design & drawing or as directed by Engineer-in- charge including cutting, fabrication, hoisting erecting, fixig in position, making riverted / / bolted/ welded conections & one coat of anticorrosire paint over it two coats of oil painting etc. complet. Item No.1 :- Excavation for deep trenches for laying rising main in Earth, Soil of all types, sand, gravel and soft murum including trimming to correct line, level and to specified widths including removing the excavated material and stacking or spreading the same up to a distance All Leads and lifts of as directed, preparing the bed for foundation and necessary safety precautions , keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications. (Payable measurements with vertical excavation) Item No.2:- Excavation for deep trenches for laying rising main in Hard murum, soft bhisa, hard man and boulder including trimming to correct line and level and to specified width, including removing the excavated material and stacking or spreading the same up to distance All Leads and lifts of directed, preparing the bed for foundation and necessary safety precautions , keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications.(Payable measurements with vertical excavation) Item No.3 :- Excavation for deep trenches for laying rising main in Soft Rock by crow bar and shavel including trimming to correct line and level and to specified width including trimming and levelling the bed by chiselling, removing the excavated material and stacking the same up to distance All Leads and all lifts of directed and safety precautions to keep the trench undisturbed till pipe laying & fixing necessary specials etc complete as per detailed specifications.(Payable measurements with vertical excavation) Item No.4 :- Excavation for deep trenches for laying rising main in Hard Rock of any toughness by blasting to correct line and level to specified width including trimming and levelling the bed as directed, removing the excavated material and sorting, stacking the same up to a distance of All Leads and lifts of as directed, preparing the bed for foundation and keep the trench undisturbed pipe laying & fixing necessary specials etc complete as per detailed specifications. (Payable measurements with vertical excavation) Item No.5 :- Backfilling the trenches in layers not exceeding 300 mm, each layer shall be consolidated by watering and ramming without disturbing the pipe line with excavated stuff as directed including breaking of clods of soil etc complete. (The backfilling on two sides of the pipeline should be carried out simultaneously) Item No.6 :-Murum bedding in trenches with murum of approved quality in layers not exceeding 150 mm to 200 mm, each layer shall be consolidated by watering and ramming as directed etc complete. Item No 7 :- Providing and supplying in standard lengths ISI mark rigid unplastised PVC for potable water with rubber ring joints including cost of rubber ring as per IS-4985-1998, excluding GST levied by GOI and GOM in all respect, including transportation,freight charges, transit insurance, inspection charges,loading, unloading, conveyance to store and stacking the same in closed shed duly protected from rays and rains, etc. complete Working Preassure PVC 110 MM 4 Kg/Cm2 PVC 140 MM 4 Kg/Cm2 PVC 160 MM 4 Kg/Cm2 Item No 8 :Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointingmaterial like echanical connector i. e thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete Working Preassure 315 MM HDPE 6 Kg Item No 9 :-Providing, supplying & erecting of CI double flange sluice valve confirming for IS-14846 including worm gear arrangement as per test pressure stainless steel spindle,caps Including transportation, inspection, unloding, loading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 100 MM 150 MM 300 MM Item No.10 :- Providing, supplying & erecting of Kinetic Double Orifice type Air Valves confirming to IS 14845 & as per standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including transportation, inspection, unloding, loading, stacking excluding GST levied by GOI & GOM in all respect etc. complete C.I.Kinetic air Valve 50 MM dia Item No. 11 :- Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M- 250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) For Thrust Block Item No 1 :- Excavation for catch / side water gutter in Hard murum strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.By Mechanical Means Item No 2 :- Providing earth work in embankment with approved materials obtained from departmental land or other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm.thickness breaking clods, dressing to the required lines, curves,grades & section, watering and compaction with Power roller to achieve not less than 97 % of standard proctor density etc.Complete Item No 3 :- Providing earth work in embankment with approved materials obtained from departmental land or other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm.thickness breaking clods, dressing to the required lines, curves,grades & section, watering and compaction with Power roller to achieve not less than 97 % of standard proctor density etc.Complete Item No 4 ;- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting ?with Intelligent Compactor with compaction analyzer and VSat attachment.to the required density. By Mechanical Means Grading I (Using Screening Type B (11.2 mm) Aggregate) Item No 5 :- Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Item No 6 :- Spreading hard murum for side width etc. complete Item No 7 :- Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
Maharashtra View Result →
15.
Defence #9961893 AOC
Tender For Provision Of Amenities For Drivers And Visitors To Office Complex Astride Parade Road Under Ge (P) Br Thal Sena Bhawan Delhi Cantt - Surface Excavation Not Exceeding 30Cm Deep And Averaging 15Cm Deep And Getting Out In Soft / Loose Soil Complete All As Specified And Directed By Engineer-In-Charge. M&L For Excavating In Trenches, N.Exc 1.5 M Wide And N.Exc 1.5 M In Depth For Foundation Etc Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N.Exc 10 Sqm On Plan And Getting Out In Soft/Loose Soil Complete All As Specified And Directed By Engineer-In-Charge. Returning, Filling In. Including Spreading, Leveling, Watering And Well Ramming In Layers N.Exc 25Cm In Soft / Loose Soil Complete All As Specified And Directed By Engineer-In-Charge. Removing Excavated Material (Soils) At A Distance N.Exc. 50 M Where Directed And Depositing At A Level N.Exc 1.5M Above The Starting Point Complete All As Specified And Directed By Engineer-In-Charge. M&L For Sand Filling Under Floors Or In Foundations, Cushioning To Interlocking Pavers /Tiles /Ug Cables Including, Leveling, Watering And Consolidation As Required Complete All As Specified And Directed By Engineer-In-Charge. M&L For Moorum /Red Bajri Filling In Floors Or Paving, Laid In Layers N.Exc 15Cm Thick, Spread, Levelled And Rammed Including Watering Complete All As Specified And Directed By Engineer-In-Charge. M&L For Plain Cement Concrete (1:4:8) Type D2 (Using 40 Mm Graded Stone Aggregate) As In Foundation, Filling And Mass Concrete Complete All As Specified And Directed By Engineer-In-Charge. M&L For Rcc M-30, Design Mix (Using 20 Mm Graded Crushed Stone Aggregate) As In Foundation Including Rafts, Footings, Foundation Beams, Plinth Beams, Bases For Columns Etc, Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed By Engineer-In-Charge. M&L For Rcc M-30, Design Mix (Using 20 Mm Graded Crushed Stone Aggregate) As In Columns, Pillars, Posts And The Like Complete All As Specified And Directed By Engineer-In-Charge. M&L For Rcc M-30, Design Mix (Using 20 Mm Graded Crushed Stone Aggregate) As In Chajjas, Roof Projections Etc Complete All As Specified And Directed By Engineer-In-Charge. M&L For Rcc M-30, Design Mix (Using 20 Mm Graded Crushed Stone Aggregate) As In Beams, Cantilever, Bressumer, Lintles Over 1.5 M Span Complete All As Specified And Directed By Engineer-In-Charge. M&L For Rcc M-30, Design Mix (Using 20 Mm Graded Crushed Stone Aggregate) As In Slab Supported On Walls, Beams And Columns In Floors, Roof, Landings, Balconies, Canopies, Deck Slabs, Shelves And The Like Complete All As Specified And Directed By Engineer-In-Charge. M&L For Cleaning Concrete Surfaces Of Any Description And In Any Position And Applying Two Coats Of Blown Grade Hot Bitumen At The Rate Of 1.50 Kg/Sqm Each Coat Complete All As Specified And Directed By Engineer-In-Charge. M&L For Mild Steel Tmt Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.90 Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engineer-In-Charge. M&L For Mild Steel Tmt Bars 5 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking Bending Spirally For Hooping For Columns, Hooking Ends And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.90 Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engineer-In-Charge. Use & Waste Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation, Plinth Beams And Similar Work, Vertical Or To Batter For Rough Finished Flat Concrete Surfaces Complete All As Specified And Directed By Engineer-In-Charge. Use & Waste Formwork To Sides Of Columns, Pillars, Posts, Stanchions And The Like For Rough Finished Flat Concrete Surfaces Complete All As Specified And Directed By Engineer-In-Charge. Use & Waste Formwork To Soffit Of Suspended Slab Such As Roof Slabs, Floor Slabs, Landings And Similar Works (Sides Of Beam, Lintels), N.Exc 200Mm Thick (Horizontal Or Sloping) For Rough Finished Flat Concrete Surfaces Complete All As Specified And Directed By Engineer-In-Charge. Use & Waste Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc Also Splays Between Floors And Beam, Etc For Fair Finished Flat Concrete Surfaces Complete All As Specified And Directed By Engineer-In-Charge. Use & Waste Formwork To Chullah Hoods, Chajjas, Troughs And Similar Items Including Edges For Fair Finished Flat Concrete Surfaces Complete All As Specified And Directed By Engineer-In-Charge. Use & Waste Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors, Window Cills, Concrete Railings, Openings In Concrete Walls, Floor And Roofs N.Exc 20 Cm Wide And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10Cm But N.Exc 20Cm Wide For Rough Finished Flat Concrete Surfaces Complete All As Specified And Directed By Engineer-In-Charge. M&L For Brick Work With Old Size Sub Class ‘B’ Bricks, Built In Cement Mortar (1:6), Straight Or Curved On Plan Exc 6M Mean Radius Complete All As Specified And Directed By Engineer-In-Charge. M&L For Hardcore Of Broken Stone Or Boulders Gauge N.Exc 63Mm, Deposited, Spread, Levelled In Layers N.Exc 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And Directed By Engineer-In-Charge. M&L For 75 Mm Thick Plain Cement Concrete (1:3:6), Type C2 (Using 40Mm Graded Stone Aggregate) As In Sub Base In Floor And The Like Complete All As Specified And Directed By Engineer-In-Charge. M&L For Vitrified Light Shade Ceramic Tiles 10Mm Thick (Square/Rectangular), Area Of Each Tile N.Exc 0.36 Sqm, Laid In Vertical Surfaces Such As Skirting & Dados Over & Including 10Mm Thick Rendering Coat In Cement Mortar (1:3), Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface Complete All As Specified And Directed By Engineer-In-Charge. M&L For Vitrified Light Shade Ceramic Tiles 10Mm Thick (Square/Rectangular), Area Of Each Tile N.Exc 0.36 Sqm, Laid In Flooring Over & Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:6), Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engineer-In-Charge. M&L For Non-Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square/Rectangular), Area Of Each Tile Exc 0.11 But N.Exc 0.18 Sqm, Laid In Flooring Over & Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:6), Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engineer-In-Charge. M&L For Glazed Ceramic Tiles Of Size 350X250X7Mm / 450X350X7Mm Thick, Laid In Vertical Surfaces Such As Skirting & Dados Over & Including 10Mm Thick Rendering Coat In Cement Mortar (1:3), Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface Complete All As Specified And Directed By Engineer-In-Charge. M&L For Granite (Of Any Type) Tiles 20Mm Thick, Machine Cut, Laid In Any Situation Over & Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:4), Set And Jointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Grinding And Polishing Complete All As Specified And Directed By Engineer-In-Charge. M&L For Rounding Of Exposed Edges Of Stone Slabs / Tiles As In Steps, Cooking Platforms And Other Similar Situations Complete All As Specified And Directed By Engineer-In-Charge. M&L For 50Mm Thick Plain Cement Concrete (1:2:4) Type B-2 (Using 40Mm Graded Stone Aggregate) As In Sub Base, Floor, Coping, Paving Plinth Protection, Finished Even And Fair Without Using Extra Cement Complete All As Specified And Directed By Engineer-In-Charge. S&F Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door/ Window/ Ceosetory Windows & Other Frames/ Chowkhat Of Size 45 X 70 Mm Comprising Of Virgin Pvc Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic, Fixed In Position With Ms Hold Fast / Lugs / Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In-Charge. Note: For Wpc Solid Door/Window Frames, Minus 5Mm Tolerance In Dimension I.E. Depth And Width Of Profile Shall Be Acceptable. Variation In Profile Dimensions On Plus Side Shall Be Acceptable But No Extra Payment On This Account. Frame Shall Be Made Of Non-Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/ Cum, Screw Withdrawal Strength Of 2200 N (Face) & 1100 N (Edge), Minimum Compressive Strength Of 58 N/Mm2, Modules Of Elasticity 900 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/ Moisture Proof And Fire Retardant. S&F Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Decorative Type Flush Door Shutter Of Size 30Mm Thick, Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non-Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/Cum And Screw Withdrawal Strength Of 1800 N (Face) & 900 N (Edge), Minimum Compressive Strength 50 N/Mm2, Modulus Of Elasticity 850 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant. Wpc To Be Laminated With Pvc Foil Of Minimum 14 Microns Thick Of Approved Design Pasted With Hot Melt Adhesive On Both Faces Of Shutter And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws, Complete All As Specified And Directed By Engineer-In-Charge. Note: Stainless Steel Butt Hinges Shall Be Paid Separately Under Respective Item Of Schedule A / Boq S&F Aluminium Sections Powder Coated (Minimum Thickness Of Powder Coating 50 Micron) As In Frames For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc Complete All As Specified And Directed By Engineer-In-Charge. S&F Aluminium Powder Coated Of Any Colour (Thickness Of Powder Coating Not Less Than 50 Micron) Window And Ventilator Glazed Shutters Without Sash Bars, Having Stile And Rails Of Size 44.60X30.00X3.18 Mm Thick With Triangular Aluminium Beading Of 15 Mm Size, Aluminium Sections Weighing 0.55 Kg/M, Side Hung Type, With & Including 4Mm Thick Plain Glass With Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws, Anodised Aluminium Fittings To Each Leaf Such As Peg Stays 150Mm Long (1 No.). Hinges Type B-21 100Mm Long (2 Nos), Suitable Handle (1 No.) Complete All As Specified And Directed By Engineer-In-Charge. S&F Anodised Aluminium Snap Grid Frame Work Of Size 605X605 Mm For False Ceiling With & Including 12 Mm Thick Perforated Particle Board Or Tiles For Insulation And Acoustic Porposes Of Size 595X595Mm Including Hangers 6 Mm Dia G.I. (Upto 1200Mm Length) Adjusting Level Fixed To Roof Slabs By Means Of Ceilling Cleats Made Out Of G.I. Flat 40 X 3 Mm Size 60Mm Long And Expansion Hold Fasteners 12.5Mm Dia 40Mm Long Complete All As Specified And Directed By Engineer-In-Charge. S&F 250Mm Long Mild Steel Sliding Door Bolts, Clip Type, Stove Enamelled Black With Bright Bolt Not Less Than 12Mm Dia With And Including A Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate And Fixed Complete All As Specified And Directed By Engineer-In-Charge. S&F 200 Mm Long Mild Steel Barrel Tower Bolts, Stove Enamelled Black With Bright Bolt Complete All As Specified And Directed By Engineer-In-Charge. S&F 100 Mm Long Mild Steel Cold Rolled Butt Hinges, Medium Weight, Fixed To Frame Complete All As Specified And Directed By Engineer-In-Charge. S&F Door Closer Hydraulically Regulated, Designation No. 2, Universal Type, Suitable For Door Shutters Of 701 To 850 Mm In Width And Of Weight Between 36 To 60 Kg And Fixed In Position Complete All As Specified And Directed By Engineer-In-Charge. S&F 150Mm Size Mild Steel Pressed Handle, Oval Type, Stove Enamelled Black Complete All As Specified And Directed By Engineer-In-Charge. S&F 20 Mm Outer Dia Of Cpvc Pipe Sdr 11 & Plain Cpvc Sdr 11 Fittings On Walls / Ceiling Or Laying In Floors Including Brass Cpvc Fitting (Elbow, Tee, Mta/Mbta, Fta/Fbta, Tank Adaptor, Union, Etc Sutable For 15Mm Bore Bath Fitting) Complete All As Specified And Directed By Engineer-In-Charge. Note:- Length Of Pipe Shall Be Measured With & Including All Fittings For Payment Purpose, Nothing Extra To Be Made For Fittings. S&F 500 Ltrs Capacity Rotational Moulded Polyethylene Water Storage Tank (Cylindrical Vertical With Closed Top), Isi Marked, Double Layered, Horisted And Fixed In Position Complete All As Specified And Directed By Engineer-In-Charge. S&F 20Mm Gun-Metal, Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And Directed By Engineer-In-Charge. S&F 20Mm Dia Bore Ball Valve, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & High Density Plastic Ball, Screwed For Iron Pipe And Fixed. (Minimum Weight 15Mm-142Gms/ 20Mm-210Gms./ 25Mm-455Gms/ 40Mm - 690 Gms) Complete All As Specified And Directed By Engineer-In-Charge. S&F 150X100 Mm Size Salt-Glazed Stoneware Gully Trap, Square Or Round Mouthed, Tvpe P With Ci Grating Including Jointing With Solvent Cement, Set In Cement Concrete (1:2:4) Type B1 (Using 20 Mm Graded Stone Aggregate) Complete All As Specified And Directed By Engineer-In-Charge. S&F 75 Mm Dia Bore Pvc (Swr) Pipes, Single Socketed, Fixed In Any Length With Rubber Ring Joints, Laid In Trenches Or In Floors Complete All As Specified And Directed By Engineer-In-Charge. S&F 75Mm Dia Bore Pvc (Swr) Bend, Any Radius Complete All As Specified And Directed By Engineer-In-Charge. S&F 75Mm Pvc (Swr) Vent Cowl Complete All As Specified And Directed By Engineer-In-Charge. S&F Beveled Edge Looking Mirror Of Size 600Mmx450Mm Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed By Engineer-In-Charge. S&F Stainless Steel Soap Dish Of Any Type, Fixed To Wall With Plug & Chromium Plated Brass Screws Complete All As Specified And Directed By Engineer-In-Charge. S&F Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And Directed By Engineer-In-Charge. S&F 75 Mm Size Pvc (Swr) Floor Trap, Plain With Grating Including Jointing With Solvent Cement, Set In Cement Concrete (1:2:4) Type B1 (Using 20 Mm Graded Stone Aggregete) Complete All As Specified And Directed By Engineer-In-Charge. S&F Tubular Towel Rail, 20Mm Dia, D Type, 60Cm Long Between Flange, Fixed To Wall With Plugs And Chromium Plated Brass Screws Complete All As Specified And Directed By Engineer-In-Charge. S&F 15Mm Dia Bore Stop Valve, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Fancy Type, Chromium Plated With Long Shank And Cup (Concealed Type), Screwed Both Ends For Iron Pipe Or For Unions Complete All As Specified And Directed By Engineer-In-Charge. S&F 15Mm Dia Bore Bib Tap, Cast Copper Alloy, Chromium Plated With Crutch Or Butterfly Handle, Fency Type, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And Directed By Engineer-In-Charge. S&F 10 Litres Pvc Valveless, Syphonic Action Type, Flushing Cistern, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets And 32Mm Dia Flush Pipe Of Polyethylene Of Low Or High Density Or Pvc For Low Level Cistern Complete All As Specified And Directed By Engineer-In-Charge. S&F 15Mm Size 450Mm Long Pvc Connection With Ptmt Nuts At Both Ends With Rubber Washer Complete All As Specified And Directed By Engineer-In-Charge. S&F Vitreous China Wash Down Water Closet Pan Pedestal Pattern, White (Excluding Fixing Bolt, Flushing Cistern And Flush Pipe) Complete All As Specified And Directed By Engineer-In-Charge. S&F Vitreous China Wash Down Water Closet Pan Pedestal Pattern, White (Excluding Fixing Bolts,Flushing Cistern And Flush Pipe) With & Including Health Faucet (Abs Body) With 15Mm Dia 1.20M Long Mild Steel Chromium Plated Flexible Tube And Abs Wall Hook, Making All Connections And Fixed In Position Complete All As Specified And Directed By Engineer-In-Charge. S&F Stainless Steel Toilet Paper Holder With Flat Recessed Type Complete All As Specified And Directed By Engineer-In-Charge. S&F Vitreous China Wash Basins, White, Angle Back Type Of Size 550X400Mm Including Brackets And Pedestal, Cutting For And Pinning The Ends Of Brackets Or Erecting Stands Including 32Mm Dia Bore Waste Coupling Of Ptmt (Half Or Full Threaded) With 32 Mm High Density Polyethylene Waste Pipe (Hdpe) Of Pressure Rating 6Kgf/Cm², Fixed To Walls Complete All As Specified And Directed By Engineer-In-Charge. S&F 15Mm Dia Bore Pillar Tap, Fany Type, Cast Copper Alloy With Capstan Head, Chromium Plated, Screwed Down, High Pressure With Or Without Lettered Hot Or Cold With Long Screwed Shank & Fly-Nut, Screwed For Iron Pipe And Fixed Complete All As Specified And Directed By Engineer-In-Charge. S&F Vitreous China Urinal Half Stall Bowl, Flat Back Large Of Size 420X395X635Mm, White With Grating And Union For Discharge Pipe Complete Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar (1:2), Securing Urinal To Plugs With And Including 60 Mm Long Brass Screws, Pointing Around Urinal Back In Cement Complete All As Specified And Directed By Engineer-In-Charge. M&L For 15 Mm Thick Rendering On Other Than Fair Face Of Brick-Work Or On One Side Of Lathing, Applied In Two Layers, 1St Layer 10 Mm Thick In Cement Mortar (1:6) And 2Nd (Top) Layer 5 Mm In Cement Mortar (1:4) Mixed With Water Proofing Compound (Wpc) As Per ManufacturerS Instructions, Finished Even And Fair Complete All As Specified And Directed By Engineer-In-Charge. Note:- Wpc Shall Be Measured And Paid For Separately At Supply Only Rates. M&L For 10 Mm Thick Rendering On Fair Faces Of Concrete Surfaces Of Celing In Cement Mortar (1:4), Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed By Engineer-In-Charge. M&L For 15 Mm Thick Rendering On Fair Faces Of Brick Work Or Concrete Surfaces Of Internal Wall In Cement Mortar (1:4), Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed By Engineer-In-Charge. M&L For Preparation Of Newly Plastered Surfaces Of Walls And Finishing With Acrylic Smooth Exterior Paint Of Required Shade: New Work (Two Or More Coats Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm Complete All As Specified And Directed By Engineer-In-Charge. M&L For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Priming Chalk Whiting Complete All As Specified And Directed By Engineer-In-Charge. M&L For Preparation Of Newly Plastered Surfaces Of Ceiling And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Priming Chalk Whiting Complete All As Specified And Directed By Engineer-In-Charge. M&L For Water Proofing Treatment To Rcc Roof Slab, Walls, Chhajjas Etc Complete All As Specified Here-In-Below And As Directed By Engineer-In-Charge:- (A) Providing 15Mm Thick Plaster Screed Bed Layer In Cement Mortar (1:3) Mixed With Water Proofing Compound As Per ManufacturerS Instructions On Concrete Surfaces, Finished Even And Fair Complete All As Specified. (B) Preparing Plastered Surfaces Of Roof Slab, Walls, Chhajjas Etc By Brooming With Broom, Sweeping Free From Dirt, Dust Etc And Evenly Applying A Coat Of Approved Water Based Bituminous Primer @ 0.30 Kg/Sqm Of Area Complete All As Specified. (C) Supply And Laying App Polymer Modified Approved Membrane, Non-Woven, Polyester, Weighing Not Less Than 3.0 Kg/Sqm With Side / End Overlaps As Specified And Joints Sealed By Torch Application Method All As Specified. (D) Carrying Out Test For Leakage / Seepage By Flooding Water For 24 Hrs And Rectifying The Defects, If Any Observed During Flooding Test To The Entire Satisfaction Of Ge. (E) Finally Applying A Coat Of Solar Reflective Bituminous Aluminium Paint @ 0.15 Ltr/Sqm On The Top Of Membrane Surfaces Complete All As Specified And Directed By Engr-In-Charge. Notes Applicable To Srl Item No. 71 : (I) Wpc Shall Be Measured An Paid For Separately At Supply Only Rates. (Ii) A Template Of Size 450 X 450 Mm To Each Bldg Where Roof Treatment Is Carried Out With Neatly Engraved Ca No, Date Of Completion Of Wpt, Expiry Date Of Wpt, Etc To Provided And The Cost Of The Same To Be Treated As Included In The Quoted Rate. (Iii) The Work Of Wpt Shall Be Carried Out By Authorised Manufacturer / Applicator M&L For 100 Mm Thick M-50 Grade Factory Made Rubber Moulded Coloured Machine Pressed Precast Concrete Interlocking Paver Block In Approved Design And Colour Confirming To Is 15658-2006 With Grey Cement And Pigment As Approved, Laid Over 40 Mm Thick Sand Cushion And Joints Filled With Sand Complete All As Specified And Directed By Engineer-In-Charge. Note:- Sand For Cushioning Shall Be Measured And Paid Under Respective Item Of Schedule A / Boq M&L For Mild Steel, Plain, Black Sheet In Wall Cladding, Steel Gates And Similar Work, Cut To Size, Holes Punched; Including Round Headed Screws, Clout Nails Or Rivets And Fixed To Wood Or Steel Framing With Plain 40 Mm Lap Joints With Riveted Or Welded Seams Including Bending Or Turning Up, Mitred Angles, Etc As Required Complete All As Specified And Directed By Engineer-In-Charge. M&L For Mild Stee Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) And Hanging; Also Fastening And Fixing Complete Confirming To Grade Fe-410 W (Gde-E-250) Quality-B Complete All As Specified And Directed By Engineer-In-Charge. M&L For Mild Steel Stairs (Framed) Including Stringers, Treades, Landings, Balusters, Hand Rails Etc Including Cleats, Brackets, Etc Complete, Confirming To Grade Fe-410 W (Gde-E-250) Quality-B.Complete All As Specified And Directed By Engineer-In-Charge. M&L For Preparation Of New Steel & Iron Surfaces Of Any Description Over 10 Cm In Width Or Grith, Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed By Engineer-In-Charge. M&L For Reinforcement Concrete Pipes, 300Mm Dia Class Np4, Laid And Jointed Complete With Collars Complete All As Specified And Directed. M&L For Cement Concrete Aggregate Bed To Drain Pipe 300 Mm Dia Including Packing Under And Haunching Against The Sides Of Pipe After They Are Laid And Tested In Cement Concrete 1:4:8 Type D-2 Using 40 Mm Graded Stone Aggregate Complete All As Specified And Directed. M&L For 15 Mm Thick Rendering On Fiar Faces Of Brick Work Or Concrete Surfaces Of Walls In Cement Mortar (1:4), Mixed With Water Proofing Compound, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed By Engineer-In-Charge. Note:- Wpc Shall Be Measured And Paid For Separately At Supply Only Rates. Supply Only Integral Water Proofing Compound Complete All As Specified And Directed. M&L For Cutting Into Existing Manholes For Connecting 150 Mm Dia Of Pipe To New Drain, Making Good To Pipe And Rendering, Cutting Out Existing Benching For And Forming Branch Channel (1/2 Round Or 3/4 Section) In Cement (1:2:4) Type B-1 (Using 20Mm Graded Stone Aggregate), Smooth Finished And Reforming Benching As Required Complete All As Specified And Directed By Engineer-In-Charge. S&F Sfrc Manhole Covers With And Including Frame Medium Duty Of Required Size Factory Made And Test Load 10 Tonnes (Md-10), Strength As Per Is-12592 (2002), Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. M&L For Plain Cement Concrete (1:2:4) Type B (Using 20 Mm Graded Stone Aggregate) As In Lintels Upto 1.5M Clear Span, Cills, Coping, Steps, Seismic And Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Upto 60 Cm In Height, Kneelers, Apex Stones, Bed Plates, Kerbs Not Provided For, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating, Complete All As Specified And Directed By Engineer-In-Charge. M&L For Point Wiring With 1.5 Sqmm Nominal Cross Sectional Area, Single Core, 1100 Volts Grade, Multi-Stranded, Pvc Insulated, Unsheathed Frls Copper Conductor Cable With And Including Continuous Earth Wire Of Size 1.5 Sqmm Nominal Cross Sectional Area, Single Core, 1100 Volts Grade, Multi-Stranded, Pvc Insulated, Unsheathed, Frls Copper Conductor Cable And Connected To Common Earth And Earth Dolly With Suitable Copper Lugs And Drawing Into And Including Rigid Non-Metallic Pvc Conduit Of 20Mm Dia Or Higher, Medium Grade With And Including All Pvc Conduit Accessories Concealed Into Wall By Cutting Chases And Modular Metal Flush Box, Modular White Cover Plate With Frame, Blanking Plate Etc Suitable For Mylinc / Coral / Sleek Model Accessories Etc And Making Good To Disturbed Surfaces To Match The Existing Complete All As Specified And Directed For The Following:- One Light Point Controlled By One, One-Way Switch 06 Amps. One Ceiling / Exhaust Fan Point Controlled By One, One Way Switch 06 Amps. One 3 Pin, 06 Amps Socket Outlet Point On Independent Board Controlled By One, One Way 06 Amps Switch. One 3 Pin, 06 Amps Socket Outlet Point On Same Board Controlled By One, One Way 06 Amps Switch. All As Per Srl Item Item No. 84.00 Above But Point Wiring With 2.5 Sqmm Single Core Frls Cables And Earth Continuity Wire Of 1.5 Sqmm Single Core Frls Cable For One 3 Pin 15 Amps Socket Out Let Point Controlled By One, One Way Switch On Independent Board Complete All As Specified And Directed By Engineer-In-Charge. S&F Modular Switch, 06 Amps, Single Pole, One Way, 230 Volts, One Module And Ip 20 Protection Complete All As Specified And Directed By Engineer-In-Charge. S&F Modular Switch, With Indicator, 16 Amps, Single Pole, One Way, 230 Volts, One Module Complete All As Specified And Directed By Engineer-In-Charge. S&F Modular Socket Outlet 05 Pin, 06 Amps, 02 Module With Shutter Complete All As Specified And Directed By Engineer-In-Charge. S&F Modular Socket Outlet 02 In 01, 03 Pin, 06 Amps & 16 Amps, 02 Module With Shutter Complete All As Specified And Directed By Engineer-In-Charge. S&F Ceiling Rose, 6 Amps, 3 Terminal Including Connection Complete All As Specified And Directed By Engineer-In-Charge. S&F Modular Ceiling Fan Regulator, 02 Module, Ac, 230 Volts, 120 Watts, Duly Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. S&F 10 / 12 Watt Led Tube Light Fitting (2 Ft) Attractive Wall Mounted Type Suitable For Mirror Fittings, All Accessories Pre-Wired Including Fixing On Wall / Ceiling And Connecting Up With Twin Core Flat Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed By Engineer-In-Charge. S&F Led Batten Lighting Fixture 20 Watts Led 5700K (4), With Extruded Aluminium Heat Sink, Integrated Electronic Driver And All Accessories Pre-Wired Including Fixing On Wall / Ceiling And Connecting Up With Twin Core Flat Flexible Copper Conductor Cable Of Suitable Size With Connector Block Complete All As Specified And Directed By Engineer-In-Charge. S&F Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, 220 V Ac Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Fixing In Position And Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed By Engineer-In-Charge. S&F Exhaust Fan, Steel Body Ac Single Phase, 230Volt Of Size 300M Sweep With Blades, Frame And Louvers Including Cutting Hole In Wall, Making Of Wooden Frame For Mounting Of Fan And Making Good The Disturbed Surfaces Etc Complete All As Specified And Directed By Engineer-In-Charge. S&F Electric Water Heater, Storage Type 25 Ltrs Capacity, Bee Star Rated, Vertical Type With Suitable Size Of Fastner And Provision & Connecting Up Of Ss Braided Pipe With Adapter For Inlet And Outlet Water Connection Alongwith Nrv Cast Copper Alloy And 15Mm Dia Bore Stop Valve, Copper Element Corrosion Resistance Anti-Scaling Magnesium Anode Having Adjustable Knobe For Temperature Control And Inner Tank Material Of Superior Glass Lined Tank And Outer Body Material Abs With High Pressure With Standing Capacity Upto 8 Bar Pressure Having Heating Element 2 Kw And Minimum Two Year Warranty On Product & Minimum Three Years On Heating Element Complete All As Specified And Directed By Engr-In-Charge. M&L For Sub Main Wiring With 4 Sqmm Nominal Cross Sectional Area, Two Single-Core, 1100 Volts Grade, Multi-Stranded, Pvc Insulated, Unsheathed, Frlsh Copper Conductor Cable With And Including Continuous Earth Wire Of Size 2.5 Sqmm Nominal Cross Sectional Area, Single Core, 1100 Volts Grade, Multi-Stranded, Pvc Insulated, Unsheathed, Frlsh Copper Conductor Cable Drawing Into And Including Rigid Non-Metallic Pvc Concealed Conduit Of 25 Mm Dia, Medium Grade With All Conduit Accessories And Connected To Common Earth Dolly With Suitable Copper Lugs Including All Cutting / Chases Etc In Walls And Making Good To The Disturbed Surfaces To Match The Existing Complete All As Specified And Directed By Engr-In-Charge. All As Per Srl Item No. 97.00 Here-In-Before But Sub Main Wiring With 6 Sqmm Nominal Cross Sectional Area Frlsh Copper Conductor Cable With And Including Continuous Earth Wire Of Size 6 Sqmm Nominal Cross Sectional Area Frlsh Copper Conductor Cable. All As Per Srl Item No. 97.00 Here-In-Before But Sub Main Wiring With 10 Sqmm Nominal Cross Sectional Area Frlsh Copper Conductor Cable With And Including Continuous Earth Wire Of Size 6 Sqmm Nominal Cross Sectional Area Frlsh Copper Conductor Cable. S&F Industrial Type Spn Enclosure With A Two Pin And Earth Plug And Socket Complete With And Including Mcb, Sp, 20 Amps, Ac, 230 Volts C Curve, 10 Ka Breaking Capacity And Flush To Wall Including All Cuttings & Chases Etc In Wall And Making Good To The Disturbed Surfaces To Match The Existing Complete All As Specified And Directed By Engr-In-Charge. S&F Led Street Light Fitting 35 Watt 230 Volts, Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete All As Specified And Directed By Engr-In-Charge. M&L For Street Light Bracket Made Out Of Gi Pipe Light Grade 32 Mm Dia Bore 1.20 M Long, Bent To Shape And Reduced To Required Size At Top Upto 1.00 M Length By Cutting, Welding And Well Finishing Including 2 Nos Ms Clamps Of Flat Iron Of Size 25X5Mm Of Suitable Length With Drilling Hole, Fixing With Nuts, Bolts & Washters Including Painting With Two Coats Of Aluminium Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed By Engr-In-Charge. S&F Sheet Metal Enclosure Distribution Board Triple Pole And Neutral (Vtpn), Ac, 415 Volts, 04 Ways With 200 Amps Rated Copper Bus Bar And Metal Double Door Suitable For Mccb 125 Amps As Incomer And Mcb Sp As Outgoing Along With Cable End Box For Above Db And Flush To Wall Including All Cutting Etc In Wall And Making Good To The Disturbed Surfaces To Match The Existing Complete All As Specified And Directed By Engr-In-Charge. Note : Mccb & Mcb Shall Be Measured Separately S&F Mccb 100 Amps, 4 Pole, 415 Volt, Ac, Fixed Type With Breaking Capacity 16 Ka Suitable For Load Line / Vtpn Db Including Connecting By Using Suitable Copper Lugs, Testing And Commissioning Complete All As Specified And Directed By Engineer-In-Charge. S&F Mcb Single Pole (Sp) 6 To 32 Amps Rating 240V, 10 Ka C Curve, Fixed In Mcb Db Including Connecting By Using Suitable Copper Lugs, Testing And Commissioning Complete All As Specified And Directed By Engineer-In-Charge. S&F Mcb Single Pole & Neutral (Spn) 40 To 63 Amps Rating 240V, 10 Ka C Curve, Fixed In Mcb Db Including Connecting By Using Suitable Copper Lugs, Testing And Commissioning Complete All As Specified And Directed By Engineer-In-Charge. S&F Mcb Sp 40 Amps Rating, 240 Volt, B Curve, 10 Ka Rupturing Capacity Including Necessary Connection In Mcb Db Using Suitable Copper Lugs, Testing And Commissioning Complete All As Specified And Directed By Engr-In-Charge. S&F Sheet Metal Enclosure For 8 Way Distribution Boards (DbS), Double Door, Single Pole & Neutral With 200 Amps Rated Bus Bar, Ip-20 Protection Suitable For Fixing McbS/Isolators And Fixed In Position Complete All As Specified And Directed By Engr-In-Charge. Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep. Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos Blades, 30 Cm Long Down Rod, 2 Nos Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 220 Cmm, 350 Rpm (Tolerance As Per Is: 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut & Bolts, Washers, Temperature Rise ≈75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 Volts, 50 Hz, Single Phase Ac Supply, Earthing Etc Complete As Required Including Connecting Up With Twin Core Flat Flexible Copper Conductor Cable Of Suitable Size With Connector Block To Ceiling Rose Complete All As Specified And Directed By Engr-In-Charge. S&F Desert Cooler Of Steel Body Size 25X25X32, Made Out Of Corrosion Resistant, 18 Swg Gi Sheet Duly Powder Coated Paint With 500 Mm Sweep Copper Wound Fan Motor Kit Of Not Less Than 180 Watt With Metallic Blade, Isi Marked, 1400 Rpm, 230 Volts, Ac, Having Nominal Air Flow Capacity 4000 Cum Per Hour (Or Nearest Size), Water Tank Capacity Not Less Than 100 Ltr, Including Plastic Submersible Pumps, Electronic Fan Regulator With Piano Type Switch, Cooler Stand Of Suitable Size As Directed And Fixing The Desert Cooler To Existing Window Including Covering The Remaining Window Portion With 6 Mm Thick Plywood As Required Size At Site Complete All As Specified And Directed By Engr-In-Charge. Supply, Installation, Testing And Commissioning Of Water Cooler Fully Stainless Steel, Electric Driven Single Phase Having Approx Storage Capacity 40 Ltr And Nominal Cooling Capacity 40 Ltr Complete All As Specified And Directed By Engr-In-Charge. Supply, Installation, Testing & Commissioning Of Ro Plant 50 Ltr/Per Hr, Wall Mounted, Having Capacity To Treat The Raw Water Having Tds 1200 Ppm. The Treated Water Should Have Tds Less Than 60 Ppm And Hardness Less Than 10 Ppm Or As Per Who Standards. The Operating Voltage To 230 Volt, Ac + 10%, Alongwith Required Capacity High Pressure Pump And Solenoid Valves, Dry Run Protection Of Pump, Automatic Tank Level Control, Inbuilt Auto Flush Timer For Periodic Flushing Of Membranes, Over Voltage And Over Current Protection With Switch Mode Power Supply System Complete In All Respects Including Installation Fittings. Potable Water System Components Shall Comply With Safe Drinking Water Act Amendments, The 1988 Lead Contamination Control Act And Shall Conform To Ansi/Nsf 61 Section 9. Contractor Will Submit Required Test Report Post Installation Of Ro Plant And Cost Shall Be Inclusive Of 01 Day Training To User Staff Complete All As Specified And Directed By Engr-In-Charge. M&L For Earthing With Galvanized Steel Earth Plate Electrode Of Size 60Cmx60Cmx6Mm Thick, Buried Directly In Ground Vertically At A Depth Not Less Than 2.25 M Below Normal Ground Level (Ngl) With Top Edge Of Earth Plate At A Depth Not Less Than 1.5 M Below Normal Ground Level, Earth Plate Surrounded From All Sides By 15Cm Thick Packed Layer Of Charcoal Dust And Common Salt Filling In Alternate Layers And Electrode Connections By Using Gi Wire Of Size 4Mm Dia As Earthing Lead (Upto The Body Of The Equipment) By Means Of Gi Bolts, Nuts, Check Nuts, Washers And Thimbles And Protected By Light Grade 40Mm Dia Gi Pipe Connected To Main Switch Board Or Main Control Board And Gi Pipe Medium Grade 20Mm Bore For Watering Including Funnel, Wire Mesh, Rcc Pit Cover And Pcc Chamber Pit With Pcc (1:3:6) Type C-2 (Using 40Mm Graded Stone Aggregate), Including Excavation And Earth Work In Any Type Of Soil, Returning, Filling In Approved Soil And Disposal Of Surplus Soil To A Distance N.Exc 50M All As Specified And Shown In Electrical Plate No. 5 Of Ssr (Part-I) Complete All As Specified And Directed By Engr-In-Charge. All As Per Srl Item No. 113.00 Here-In-Before But Using Galvanized Iron Strip 25 X 4 Mm As Earthing Lead . S&F Garden Light Fitting 10 Watts, Ip65 Rated Led Bollard Light Including Necessary Brick/Pcc Work Complete All As Specified And Directed By Engr-In-Charge. Supply, Laying And Testing 35 Sqmm 3.5 Core Cable Xlpe Lnsulated, Screened, Pvc Bedded, Galvanized Steel Strip Or Wire Armoured, Electric Power Cables (Heavy Duty) 1100 Volts Grade With Stranded Aluminium Conductor Of Following Sizes And All Fixing & Connecting Accessories Such As Cable Lugs, Cable Glands, Nut, Bolts, Complete Complete All As Specified And Directed By Engr-In-Charge. All As Per Srl Item No. 116 Above But 10 Sqmm 4 Core Cable All As Per Srl Item No. 116 Above But 10 Sqmm 2 Core Cable Supply & Laying Well Burnt Old Size Sub Class B Bricks Of Nominal Size 230X115X75 Mm Abutting Each Other For Mechanical Protection Of Cable With Width Equal To Lenght Of Brick Complete All As Specified And Directed By Engr-In-Charge. Supply & Laying 40Mm Dia Bore Gi Tubing, Light Grade With All Necessary Fittings, Laid In Trenches/Under Road Crossing/Fixed On Pole/Wall Of Laid Under Flooring Including Suitable Mild Steel Fi Clamps Of Required Size Complete All As Specified And Directed By Engr-In-Charge. S&F Steel Tabular Swaged Poles, Type 410 Sp-31 (9 Meters Long) With Ci Base Plate, Bolts, Nuts & Screws Including The Following Works Complete All As Specified And Directed By Engineer-In -Charge :- (A) Excavation In Post Hole / Trenches Not Exc 1.5 M Wide & 2 M Deep For Pole Foundation & Getting Out In Soil Loose Soil, Returning, Filling In With Excavated Soil After Fixing The Pole In Foundation, Ramming Earth Around In Layers N.Exc 25 Cm Thick And Disposal Of Surplus Soil To A Distance N.Exc 50 M. (B) M&L For Pcc (1:3:6) Type C2 (Using 40 Mm Graded Stone Aggregate) For Plinth Block/Collar Above Gl, 300 Mm High And 450 Mm Dia (C) M&L For Painting Of Pole Externally With One Coat Of Black Bituminous Paint (Upto Planting Depth) And Above Plinth Block / Concrete Collar With Two Coats Of Aluminium Paint Over A Coat Of Red Oxide Primer Including Preparation Of Surfaces And Painting 30 Cm Wide Black Bands/Strips 3 Nos With Synthetic Enamel Paint In Alternate Layers Upto The Height Of 1.5 M Above Coping Level Complete All As Specified And Directed By Engr-In-Charge. M&L For Circuit/Submain Wiring Alongwith Earth Wire With Fr Pvc Insulated Copper Conductor, Single Core Cable With 2 X 1.5 Sqmm Earth Wire In Steel Conduit Surface/Recessed As Required For Street Light Poles Complete All As Specified And Directed By Engr-In-Charge. S&F Street Light Pole Junction Box Of Size 200 X 160 X 98Mm, Made Of High Quality Thermosetting Plastic Polyasterene, Dust And Jet Water Proof, Chemical / Acid Corrosion Resistant Impact And Shock Proof Ip 65 With Internally Imbedded Gasket (Pur) Including 1 No. Sp Mcb 6 Amps Alongwith Door Arrangement And Pre-Mouthed Knock Out All The Sides Including Back Of The Base. The Box Must Be Fitted With 10 Sqmm Stud Type Terminal 04 Nos Including Elmex Stud Type Tb 04 Nos Including Connection Using Cable Lugs / Glands Complete All As Specified And Directed By Engr-In-Charge. Note: - Cost Of Incoming And Outgoing Cable Lugs & Glands Of Suitable Size Deemed To Be Included In The Quoted Rate Fabrication And Supply, Errection, Testing Complete Lt Panel Board Outdoor Type Made Out Of 3.15 Mm Thick Ms Sheet Vermin Proof And Water Proof With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer. Lt Panel Shall Be Fixed To Angle Iron Frame Of Size 40 X 40X 6 Mm (Length Of Angle Iron Legs 60 Cm From Lt Panel Including All Pcc Works For Fixing The Frame Complete) And Suitable Size Of Cable Glands Chromium Plated Complete, Including Bus Bar Chamber With Bus Bar Capacity Of 200 Amps And Phase Indication Colour Sleeving Bus Bar Strips With 3 Phase And Natural Voltmeter And Amp Meter, Ct And Consisting Of The Following : - (A) Volt Meter With Selector Switch 0 To 500 Volts –01 No. (B) Amp Meter With Ct 0 To 200 Amps – 01 No. (C) Phase Indicator Lamp Red Green & Yellow (Rgy) - 03 Nos (D) Mccb 160 Amps Three Pole, 50 Hz, 415 Volts With Rupturing Capacity 35 Ka- 01 No. (Incoming) (E) Mccb 63 Amps Three Pole, 50 Hz, 415 Volts With Rupturing Capacity 25 Ka - 03 Nos Supply & Laying 40Mm Dia Bore Gi Tubing, Medium Grade, Isi Marked Including All Fittings, Laid In Trenches / Fixed To Walls Or Laid In Floors Including Making Good The Disturbed Surfaces Complete All As Specified And Directed By Engr-In-Charge. Note: Excavation & Earth Work Shall Be Measured And Paid For Separately. All As Per Srl Item No. 125.00 Above But 25Mm Dia Bore Gi Pipe S&F 40Mm Dia Bore Gun Metal Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And Directed By Engr-In-Charge. S&&F 25Mm Dia Bore Stop Valve, Cast Copper Alloy, Screwed Down, High Pressure With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or Union And Fixed Complete All As Specified And Directed By Engr-In-Charge. Cutting The Existing Ci / Gi Water Supply Pipeline Up To 200 Mm Dia For Inserting Suitable Size Gi Tee And Socket Of Size Upto 40Mm Dia For Taking Branch Connection For Potable Water Including Necessary Excavation And Making Good The Disturbed Area Complete All As Specified And Directed By Engr-In-Charge. Boring Holes Upto 80Mm Bore Under Road Pavement By Bocky Manually In Any Type Of Soil Complete All As Specified And Directed By Engr-In-Charge.
Contract Date: May 11, 2026 Contract Value : 41.41 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
16.
Defence #9952015 AOC
Tender For Special Repair To Building No T-90 At Signal Vihar Of 172 Inf Bn (Ta) Madras, Brichgunj Mil Stn, Sri Vijaya Puram.; 1 Taking down chowkats or frame with shutters area n.exc 1.5 Sqm (without taking of shutter from frame) including cutting holes to facilitate the taking down etc complete all as directed. 2 All as per item no 1 above but area exc 1.5 and n.exc 4 Sqm Each 3 Dismantling floor hearth or wall tiling of any description, size and thickness including cement mortor bedding (but not backing), removing rubbish off the premises etc complete all as directed. 4 Taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as directed. 5 Taking up or down 20mm bore of pipe GIsteel tubing and connections, including cleaning for refixing or removal outside MD land etc complete all as directed. 6 All as per item No 5 above but 25 or 32 mm dia 7 All as per item No 5 above but 40 or 50 mm dia 8 Demolition of Precast Concrete Block work built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. 9 Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor etc complete all as directed. 10 Demolition of PCC unreinforced in ground floor and paving above or below any thickness etc complete all as directed. 11 Demolition of reinforced cement concrete in roofs, floors (other than ground floor), beams, staircase, landing, chajjas and other similar suspended works etc complete all as specified and directed. 12 Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed. 13 Dismantling plain or corrugated steel sheeting any gauge, thickness, in roof coverings etc complete all as specified. 14 Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc completeall as directed. 15 M&L RCC M-30 (design mix) using 20 mm graded stone aggregateas in Chajjas complete all as specified and directed. 16 Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges for flat fair finished surfaces complete all as specified and directed. 17 M&L TMT mild steel bars 6 to8 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming tocomplete all as specified and directed 18 M&Lprecast RCC (1:2:4) type B1 (20 mm graded crushed stone aggregate) as in cover slabs and similar articles with plain faces set in CM (1:4) complete all as directed. 19 M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified. 20 Cutting chases in brick/ block masonry walls built in cement mortor for concealed water tubing or concealed conduit wiring, etc., and making good in CM 1:3, cutting not exc 10 cm girth etc complete all as directed. 21 M&L for Granite (of any type) work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, window cills, cooking platforms, vertical surfaces/wall lining and like including 15mm thick bedding in CM 1:6and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as directed. 22 Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed. 23 S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. 24 S&F factory made wire gauge panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 5mm thick & 15mm wide stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes fitted in frame welded / sealed to the stiles & rails with suitable decorative PVC beading of 10mm x 10mm (90degree), and joined together with solvent cement. The wire gauge shall be stretched to tighten firmly 25 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 26 All as per item no 25 above but size of size 50x100mm 27 S&F 150 mm size aluminium anodised barrel tower bolts of extruded sections, with cast or sheet barrel and rolled or cast bolts etc complete all as directed. 28 S&F aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, length of bolt 300 mm etc complete all as directed. 29 S&F 100mm size butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed etc complete all as directed. 30 S&F incontinuous piano type hinges mild steel bright finish or electro galvanised width of flap 30 mm (when opened) complete all as directed 31 S&F 150 mm size extruded aluminium handles fabricated type, anodised and polished etc complete all as directed. 32 S&F 100 mm size extruded aluminium handles fabricated type, anodised and polished etc complete all as directed. 33 S&F magnetic catch of approved design and pattern and fixed as directed etc complete all as directed. 34 S&F in repairs anodised aluminium alloy curtain rails 20mm dia with brackets fixed to required lengths etc complete all as directed. 35 S&F Aluminium (extruded section) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg andfixed etc complete all as directed 36 S&F floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor overall length of cover plate 150mm etc complete all as directed. 37 S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed 38 S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. 39 S&F powder coated of any colour(minimum thickness of powder coating 50 micron)aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed 40 S&F powder coated of any colour(minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (2 no.) complete all as specified and as directed. 41 S&F aluminium composite panel sheet of 3 to 4 mm thick as in cup board, wall cladding and false ceiling fixed onaluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10 to 30 mm, applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant, The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. 42 M&L for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick etc complete all as specified and directed 43 M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15mm thick screed bed in CM 1:6 all as specified and as directed. 44 All as per item no 43 above but prepolished kota stone in riser of steps, skirtings, dado and pillar with and including 10mm thick CM 1:4 backing coat 45 All as per item no 43 above but single piece prepolished stones in Treads with full round nosing and two nos 6mm wide and 3mm deep grooves along the exposed length. 46 M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed. 47 M&L PCC 1:3:6 type C1 using 20mm graded aggregate of 75 mm thick as in Plinth Protection complete all as specified and directed. 48 M&L cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate) all as specified and as directed. 49 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete all as specified and as directed. 50 M&L for glazed ceramic coloured tiles on vertical surface 300x 450X 7mm thick with and including 10mm thick CM 1:3 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed. 51 M&L forNon - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.with and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. 52 M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed. 53 All as per item No. 52 above but in vertical surfaces such as skirting and dado, laid over and including 10 mm thick rendering in CM 1:4.complete all as specified and as directed. 54 M&L for water proofing treatment to sunken surfaces of the slab in following sequences:- 55 Slope correction by using 1:2:4(Nominal Mix) concrete minimum 25mm thickness at one end and a slope of 1:20 by using 12.5 mm graded stone aggregate with integral water proofing Chemical PIDI PROOF-LW mixed in proporation 200ml /50 Kgcementof DR Fixit of Pidilite Industries Ltd or STP No 1 (liquid) of STP Ltd in proporation 200ml / 50 Kg cement or equivalentas per manufacturer instructions complete. 56 PCC padding with cement concrete 1:1.5: 3 type A0 (using 12.5 mm graded stone aggregate) 25mm thick with integral water proofing compound Dr Fixit manufactured by M/S Bouchemic or equivalent as per manufacturer instructions complete incl providing spout pipe of 50 mm as required. 57 Vertical sides plastered in CM 1:4, 15mm thick with WPC @ 3 % by wt of cement and sunken portion to be filled(ponded) with water and tested for 7 days after required period of curing to observe leakages/seepages, if any, shall be arrested by pressure grouting and retested till leakages/seepages are completely stopped.(Note :-WPC Measured Separately) 58 After ponding test the surface shall be dried and sides of sunken slab shall be treated with two coats proof coats black manufactured by M/S Dr fixit or equivalent as per manufacturer instructions all over and testing again for water tightness by ponding of water for 72 hours complete. 59 Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. 60 Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. 61 M&L for 25 mm thick PCC 1:3:6 type C2 using 40mm graded aggregate as in Mass concrete in sunken treatment. 62 M&L for 50 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate as in top surface after sunken treatment. The joints in CI/GI/PVC pipes, Nahani traps,WC, P/S traps shall be made leak proof. The gap around pipes in walls/beams shall be properly filled and sealed with water proof joint fillers. 63 M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in Mass concrete in sunken treatment. 64 M & L for water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:-(i)Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii)Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm.(iii)Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm.Note :- Water proofing compound shall be measured and paid separately. 65 M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. 66 M&L for 15mm thick rendering in two layers of 10mm thick backing coat in CM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement. (Note : Water proofing compound shall be measured and paid seperately) 67 M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces as in Ceiling Surface, soffits of slab/chhajasin CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed. 68 Supply only liquid integral water proofing chemicals complete all as specified and directed. [Make; Dr.Fixit Pidiproof LW+ of M/s Pidilite Industries or STP No. 1 (liquid) of M/s STP Ltd] (3% by wt of cement). 69 M&L for application of high build polymer cement sand mortar 1:2.5 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 20mm thick in two layers over slurry priming coat of 1 volume Nito bond SBRto 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing to match with the existing complete all as specified and as directed.[ Note : Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or equivalent chemicals of MC Bouchemics/Beck] 70 M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper etc complete all as specificed and as per directed. 71 M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper etc complete all as specificed and as per directed. 72 M&L for preparation of newly plastered surfaces of walland applying two coats of Oil Bound distemper over a coat of primer etc complete all as specified and directed. 73 M&L for preparation of newly plastered surfaces of ceilingand applying two coats of Oil Bound distemper over a coat of primer etc complete all as specified and directed. 74 M&L for preparation of newly plastered surfaces of wall and applying twocoat ofweather proofexterior acrylic emulsion paint with anti fungal property over a coat of exterior primer complete all as specified and directed. 75 M&L for preparation of old plastered surfaces of wall and applying twocoat ofweather proofexterior acrylic emulsion paint with anti fungal property etc complete all as specified and directed. 76 M&L for applying 1mm thick wall care putty on newly plastered surfaces of wall etc complete all as specified and directed. 77 M&L for writing letters/fiqures/numbers (Block. Roman, Italic or Indian) etc. n.exc. 30 cm high over and including black synthentic enamel painted surface all as specified and directed. 78 S&F 4.00 mm thick sheet glass ordinary quality n.exc 0.5 sqm etc complete all as directed. 79 S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws etc complete all as specified and as directed. 80 S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws etc complete all as specified and as directed. 81 S&F MS works as in wind ties for roof incl securing bolts etc complete all as specified and as directed. 82 S&F Roof Trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or Flat section) including distance pieces, cleats etc conforming to Fe-410-W grade E 250 Quality B complete all as specified and directed. 83 M&L for preparation of new steel and iron surfacesexc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of red oxide, zinc chrome primer etc complete all as directed. 84 M&L for preparation of old painted steel surfaces over 10 cm in width or girth andapplying one coat of synthetic enamel paint etc complete all as specified and directed. 85 S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and as directed. 86 All as per item No. 76 above but 25 mm dia 87 All as per item No. 76 above but 40 mm dia 88 S&F in repair 40mm bore gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe etc completeall as specified and directed. 89 S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed. 90 S&F in repairs 15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed. 91 S&F in repairs 15mm size fancy type Bib taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed. 92 S&F in repairs 15mm size fancy type chromum plated Stop valves/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedetc complete all as directed. 93 S&F in repairs chromium plated two way bib cock 15 mm bore complete all as specified and as directed by Engineer-in-Charge. 94 S&F in repairs 15mm sizefancy type brass chromium platedwall mixer for mixing cold and hot water with necessary fittings, screwed down for iron pipe and fixed etc complete all as directed. 95 S&F in repairs glass shelf of size 600x120mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats etc complete all as directed. 96 S&F in repairs soap dish fixed with chromium plated brass screws and wooden/plastic cleats etc complete all as directed. 97 S&F in repairs Brass chromium plated tubular towel rail, 600mm long between flanges fixed with screws and wooden/plastic cleats etc complete all as directed. 98 S&FPVC connections 15mm size with PTMT nuts of length 450mm etc complete all as directed. 99 Taking down PVC waste ,vent,rain water pipes incl fittings in any position 100 S&F 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as directed. 101 All as per item no 91 above but 110mm dia 102 S&F 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls etc complete all as directed. 103 All as per item no 93 above but 110mm dia 104 S&F 75mm bore of pipe PVC (SWR) bends any radius with access door etc complete all as directed. 105 All as per item no 95 above but 110mm dia 106 S&F 110 mm bore of pipe PVC (SWR) plain bends any radius etc complete all as directed. 107 S&F in repairs 75mm bore of pipe PVC (SWR) vent cowletc complete all as directed. 108 S&F in repairs 110mm bore of pipe PVC (SWR) vent cowletc complete all as directed. 109 S&FStack clamps out of 50mm by 5 mm flat ironand 16mm dia roundiron stays, includingbolts and nuts andsecuring ends of stays towall or rooffor 75 mm dia pipecomplete all as specified and as directed 110 S&FStack clamps out of 50mm by 5 mm flat ironand 16mm dia roundiron stays, includingbolts and nuts andsecuring ends of stays towall or rooffor 100 mm dia pipecomplete all as specified and as directed 111 S&F in repairs Cast iron Nahani trap with diameter of outlet 75mmwith grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed. 112 S&Fin repairs 75mm dia outlet PVC (SWR) PVC (SWR) floor trap with grating including jointing with solvent cement 113 S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm with and including CI brackets, PVC waste pipe, 32 mm bore brass CP waste couplings with long screwed shanks and fly nuts etc complete all as specified and as directed. 114 S&F in repairs glazed earthen ware viterous china wash down water closet (pedestal pattern) white coloured with and including seat cover, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device and flushing pipe including connection to trap and to flushing pipe, anti syphonage pipe etc complete all as directed. 115 S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. 116 S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engineer-in-Charge. 117 S&F in repair looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thickAC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed 118 S&F in repair chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook, complete all as specified and as directed by Engineer-in-Charge. 119 S&F in repair stainless steel grade 304, 0.50mm thick, glossy finish, wall mounted kitchen plate rack assembeled set of 750 x 600 x 250mm and fixed with screws complete all as specified and directed 120 Taking down carefully aluminium point wiring(light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed. 121 M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated andunsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets,fan regulators etc., all as specified and as directed for the following:- 122 One light point controlled by one switch 123 One exhaust fan point controlled by one switch 124 One bell point controlled by one switch 125 One fan point controlled by one switch and one regulator 126 One 3 pin switch socket outlet point 5 amps on same board with other switches 127 One 3 pin switch socket outlet point 5 amps on independent board 128 One light point controlled by two 2-way switches, with cables 1.5 sqmm size 129 All as per item No 112 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed. 130 Supply and fixswitch piano flush button single pole oneway 5 amp complete all as specified and as directed. 131 Supply and fix switch piano flush button single pole two way 5 amp complete all as specified and as directed. 132 Supply and fix switch socket combination 3 & 2 pin (multi pin) 5 amp flush type complete all as specified and as directed. 133 Supply and fixsocket outlet multipurpose 3 & 2 pin5 amp flush type complete all as specified and as directed. 134 Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed. 135 Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed. 136 Supply and fix lamp holder(angle type) PVC body with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge. 137 Supply and fix B-22 LED lamp of 9/10 watt all as speciifed and dircted 138 Supply and fix of bell push single phase, 240 Volts, 50 Hz, complete all as specified and as directed by Engineer-In-Charge. 139 Supply and fixbell Ding Dong 240 Volts 50 Hz complete all as specified and directed by Engr-in-Charge. 140 Supply and fixfan speed regulator, electronic suitable socket typefor single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge 141 S & F Single pole and neutral metal enclosure with 2 pin and earth plug and socket and top plug complete with 20 Amps MCB SP , 240 Volt all as specifiedand as directd 142 Taking down serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers, safety wire of size not less than 1.00mm & bolts including cotter pin for complete all as directed. 143 Taking down serviceable exhaust 300 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades complete and refixing back at site with new clamps, nuts, washers & bolts complete all as directed. 144 Supply and fix in repairs exhaustfan suitable for on working of AC 230 V ,50 Hz380 mm sweep 1200 RPM,with steel metal body ,incl louvers depositing old fan in MES storecomplete all as specified 145 Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed.Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc 146 Supply and fix in repair sheet metal enclosure Loadline distribution vertical DB, MCCB as incomer 4 ways 415 volts, with 200 amps rated bus bar double door suitable for mounting MCCB 100 A TPN as incomer and MCBs as outgoing, Triple pole as incoming complete all as specified and directed including taking down old MCB DBs complete.Thye Rate shall be included the incomer MCCB TPN of 100 AmpsNote-: Incoming & outgoing connections from yhe DB shall be provided with proper lugs/ thimbles etc 147 Supply and fix in repair MCB single pole240 volts, 6 to 32 amps B series complete all as specified and as directed by Engineer-in-Charge 148 Supply and fix in repair single pole and netural 240 Volts 32 amps complete all as specified and as directed by Engineer-in-Charge 149 Supply and fixing in repair of aluminium housing LED Smart bright batten 22 /20 Watt mounted battenfitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours includinglamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. 150 Supply and fixingin repair of aluminium housing LED Smart bright batten 10Watt mounted battenfitting 2 ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours includinglamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. 151 S&F in repair of 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. 152 M & Lin repairs for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessoriesfixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLSsingle core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre. 153 All as per item sr no 136.00 above but of size 4 sqmm complete all as specidied and as directed. 154 M&Lin repairfor earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I 155 supply & Lay in repairXLPEinsulated,heavy duty 1100 volt grade electricarmoured LT UG cable with aluminium conductorof size 25 Sqmm 3.5 Core in trenches/along the wall/including making all connections, saddles, spacers complete with aluminium lugs as required at site and as directed by Engr-in-Charge 156 Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil 157 Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cmsoil / hard dense soil. 158 Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.Soft Soil / hard dense soil 159 Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed. 160 Disconnecting the electric connection ,taking down theexisting Electric Energy meter of any type and size care fully , refix the same incl electric aconnection to the meter at existing / new location other repairs of building all as specified and as directed. 161 S& F in repairs steel water tubeslight grade (ISI marked) galvanised with all fittings supportingfor ceiling fans in ceilings of size 50 mm bore pipe, complete, all as specified and as directed by Engr-in-Charge.
Contract Date: Mar 02, 2026 Contract Value : 49.24 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 15
Andaman And Nicobar Islands View Result →
17.
Defence #9929203 AOC
Day To Day Maintenance Incl Certain Other Misc Works At Md, Otm, Mes Area At West Side Of Lehal Marg Under Ge(S) Binnaguri As Per Tender Docus- 1 Hacking out of old broken glass any thickness size quality or description from metal (Aluminium/steel) frame including punching or drilling out old glazing pins complete all as specified 2 S&F 4mm thick sheet glass, ordinary quality and glazing with and including aluminium beading in square exc 0.5 sqm in each pane as per existing required at site for completion of work complete all as specified 3 S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including steel pin. 4 S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane including steel pin. 5 Taking down steel wire mesh door shutter area exc 1 Sqm but n.exc 2 Sqm each and refixing in the same opening after repairing, resucring, easing, adjusting by cutting / welding of hinges (03 hinges in each shutter) to suit the raising of floors etc, including replacement of wornout wire mesh, handle, tower bolt, sliding bolt, guard bars, rat tail spring etc as per existing at site complete all as specified 6 Taking down steel wire mesh shutters of any description area exc 1 Sqm and n. exc 2 Sqm each and removal from site complete all as specified 7 M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified Note: (i) Steel wire mesh door shutters prepared strictly as per existing at site including complete accessories like handle, tower bolt, sliding bolt, hinges, rate tail spring etc. Nothing extra shall be admissible on this account.(ii) Wire cloth shall be measured and paid separately under respective item as supply only. 8 Supply only galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed to steel door shutter as per existing complete all as specified 9 M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified 10 Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified 11 M&L for providing machine cut polished Kota stone slab 18-20mm thick over and including 15mm thick cement screed bed in CM (1:6) and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified 12 All as per item No 11 but in narrow width of vertical surfaces like riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering/backing coat in cement mortar (1:3). 13 M&L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thickrendering/ backing coat in (1:4) including rounding the exposed surfaces of granite complete all as specified 14 All as per item No 13 here in before but as in skirting (12 to 15 mm thick) but on 10 mm thick rendering/ backing coat in CM (1:3) complete all as specified 15 Providing holes to cooking platform of 25 mm dia size for inserting cooking gas pipe in suitable place complete all as specified 16 Demolition of brick work or stone/boulder masonry/ precast concrete block built in cement mortar including all quoins, arches, pillars etc complete all as specified 17 M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified 18 M&L for brickwork with flyash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified 19 M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work mixed with water proofing compound @ 200 ml per beg of cement or as per manufacturers instructions finishing the surface fair and even without using extra cement complete all as specified Note: Water proofing compound shall be measured and paid separately under relevant item of schedule A. 20 Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified . 21 M&L for 15mm thick rendering in cement mortar 1:6 on fair face/other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified 22 Demolition of cement concrete (Unreinforced) Concrete of any description and in any position not otherwise specifically provided complete all as specified 23 M&L for Plain Cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone agg)in foundations, filling and mass concrete complete all as specified 24 M&L for providing plain cement concrete (1:3:6) type C-1, (using 20 mm graded crushed stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating including necessary form work as required complete all as specified 25 M&L for hard core of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified 26 M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, finishing cement concrete surface even & fair without using extra cement including filling the joints with bitumen & sand in 2:1 proportion etc complete all as specified 27 M&Lfor 75 mm thickcement concrete 1:3:6type C-2 (using 40 mm graded crushed stone aggregate) as in path /steps/ sub base laid with and incl use and waste of form workand finishing the surface even and rough to receivethe topping layer ortiling complete all as specified. 28 M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone agg) 25 mm thick (average) stone aggregate as in roof padding, levelling course including cleaning of existing surface complete all as specified 29 M&L for joint freenon-skid ceramic tiles any selectedcolour (600x600x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified 30 All as item No 29 here-in before but on vertical surfaces fixed over and including 10mm thick rendering/ backing coat in CM (1:4) complete.(Size =600x100mm) 31 M&L for preparation of newly plastered or unplastered wall surfaces and applying two coats of Exterior acrylic emulsion paint of standard quality and make, over a coat of white primer complete all as specified 32 M&L for preparation of the surface and applying 1.00mm thick (average thickness) wall care putty on wall complete all as specified. 33 M&L for two coats of acrylic distemper over a coat of primer on new wall surface including preparation of the surface all asspecified. 34 Dismantling wrought iron or mild steel work of any description not otherwise provided for grills, rails etc and removal from site. 35 M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters;verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified 36 M&L for rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe - 410 (Gde E-250) complete all as specified 37 S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 16 to 20 mm 38 S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm & n exc 10cm long dia of shank 16 to 20 mm 39 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified 40 S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with self tapping screw complete all as specified 41 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified 42 S&F aluminium anodised snap grid false ceiling to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including hanging proper hanging arrangement with 4 mm dia anodized galvanised iron wire and adjuster complete all as specified 43 S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as specified 44 Taking down chowkats or frames area exc 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutter from the frames) and removal from site including cutting holes for taking out hold fast or dismantling brick work/ stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without extra cost to the Govt) complete all as specified. 45 Taking down chowkats or frames area n.exc 1.5 Sqm each with shutters (without taking off shutter from the frames) and removal from site including cutting holes for taking out hold fast or dismantling brick work/ stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without extra cost to the Govt) complete all as specified. 46 Taking down shutters of any description area exc 1 Sqm and n. exc 2 Sqm each and removal from site complete all as specified 47 S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm 48 S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm 49 Resecuring or easing & adjusting without taking down shutters of any description area exc 1 Sqm and n. exc 2 Sqm each complete all as specified 50 Taking down shutters of any description and refixing in the same opening after resecuring or easing & adjusting area exc 1 Sqm and n. exc 2 Sqm each complete all as specified 51 S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated with second class hard wood rail and styles, complete all as specified 52 M&L for 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified 53 S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified 54 S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/ frame to match complete all as specified 55 M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified 56 S&F 150 mm size aluminium handles cast type anodised complete all specified 57 S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all specified 58 S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all specified 59 S&F 140mm (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 60 S&F 300mm size, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete 61 S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified 62 S&F in repairs 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified 63 S&F Powder coatedaluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified 64 S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading, screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified 65 M&L for fabrication and fixing of anodised powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2 mm and section of bottom and top rail of section 114 mm x 44.45 mm x 2mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ frosted float glass, and with anodised aluminium snap beading of size 18.20 mm x 16.66 mm scred for fixing fully including all necessaryfittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 No heavy duty 200 mm long aluminium tower bolt per shutter and 3 Nos 125 mm long stainless steel butt hinges per shutter including taking down old one complete all as specified 66 Taking down aluminium door/ window shutters any size and refixing in the same opening after repair/replacement of defective accessories/any part like handle, hinges, tower bolt, beading, rubber packing, lock, any aluminium shutter part, screws, door stopper, glass etc. upto the complete all as specifiedNotes:(i) Glass shall be measured and paid separately under relevant item as supply only.(ii) The quoted rates shall be inclusive cost of handle, hinges, tower bolt, beading, rubber packing, lock, any aluminium shutter part, screws, door stopper and nothing extra shall be admissible on this account. 67 Supply only 5.5 mm thicksheet glass, ordinary quality in square exceeding 0.5 Sqm in each pane, complete all as specified 68 S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified 69 S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified 70 S&F factory made solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified. 71 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement & fixing in the frame at site as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified. 72 S&F 75mm size stainless steel butt hinges with mild steel hinge pin complete all specified 73 S&F 100 mm size aluminium handles cast type anodised complete all specified 74 S&F aluminium anodised barrel tower bolt of extruded section 100 mm long complete all specified 75 S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified 76 M&L for Plain Cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone agg)in foundations, filling and mass concrete complete all as specified 77 M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication) 78 Demolition of Reinforced cement concrete of roofs, floors (other than ground floors), beams, staircase, landings, chajjas, facia and similar suspended work complete all as specified 79 M&L forreinforced cement concrete (nominal mix) type A1 1:1.5:3(using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified.Note: Reinforcement and formwork shall be measured and paid for separately. 80 M&L forreinforced cement concrete (nominal mix) type A1 1:1.5:3(using 20mm graded crushed stone aggregate) as in chajjas etc complete all as specified.Note: Reinforcement and formwork shall be measured and paid for separately. 81 M&L forreinforced cement concrete (nominal mix) type A1 1:1.5:3(using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified.Note: Reinforcement and formwork shall be measured and paid for separately. 82 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified 83 Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished surfaces of concrete complete all as specified 84 Use and waste of formwork to Formwork to chullah hoods, chajjas, troughs and similar items including edges, etc. for flat rough finished surfaces of concrete complete all as specified 85 Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide for rough finished surfaces of concrete complete all as specified 86 S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified 87 M&L for TMT bar 10 mm dia and over cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified 88 M&L for TMT bar 5 mm dia and over, cut to length, bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in binders, stirrups etc complete all as specified 89 M&L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing and conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified . 90 Taking down cement plaster on wall & ceiling of any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified 91 M&L for 5mm thick rendering in CM 1:3 on ceiling surfaces finishing the surfaces even and smooth without using extra cement complete all as specified 92 M&L for applyingthree coat of white washing including preparation of new or previously untreated ceiling surfaces. 93 M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper over applying necessary layer of putty where ever required for filling of holes and depressions complete all as specified 94 Material & labour forpreparing old surfacesof wall and applying one coat of oil bound distemper over applying necessary layer of putty where ever required for filling of holes and depressions complete all as specified 95 M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying two coats of exterior acrylic emulsion paint all as per manufacturers specification and as specified. 96 M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying one coat of exterior acrylic emulsion paint all as per manufacturers specification and as specified. 97 M&L for applying onecoat of cement base paint of standard quality and make including preparation of new /old wall surfaces complete all as specified 98 Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified 99 M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cementto match with shade of tile in floors laid over and including 15mm thick screed bed in CM (1:6) complete all as specified 100 M&L for glazed ceramic coloured tiles (450x300x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match with shade of tile fixed over and including 10mm thick rendering/ backing in CM(1:4) complete all as specified 101 M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including 15mm thick screed bed in CM(1:6) complete all as specified 102 All as per item No 101.00 but as in skirting fixed over and including 10mm thick rendering/ backing in CM(1:4) complete all as specified 103 Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified 104 Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified 105 S&F 15mm bore steel water tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) complete all as specified Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. 106 S&F 20mm bore steel water tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) complete all as specified Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. 107 S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. 108 S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. 109 S&F 110mm bore PVC (SWR) bends any radius complete all as specified. 110 S&F 75mm bore PVC (SWR) bends any radius complete all as specified. 111 S&F in repairs 75mm bore PVC (SWR) floor/ nahani/ multi floor trap with CP grating any type including jointing with solvent cement complete all as specified. 112 S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with polythene foam insulation as intermediate layer and closed top) double layer ISI marked (IS: 12701 : 1996), hoisted and fixed in position all as specified in SSR Part I including inlet, outlet and over flow connections etc including dismantling existing tank complete as specified 113 S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete as specified 114 S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified 115 S&F in repair 15mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified 116 S& in repair vitreous China Urinal, Half stall type, white (including flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified 117 S&F in repair urinal spreader of CP brass for fixing with 15 mm dia pipe complete all as specified 118 S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including PVC seat cover of same make complete all as specified 119 S&F in repair vitreous China one piece EWC white including duroplast soft close seat cover complete all as specified Make: Cera Cat No. A1014110 & 11 or technocommerically equivalent make/model in Jaquar/ Plumber/ Nycer as approved by GE. 120 S&F in repairWater Closet (squatt pattern) of vitreous china squatting pan of pattern ORRISA pattern size 580 x 440 mm white with integral foot rests (including flush pipe) including PVC P or S trap and connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified 121 S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour including PVC connection, PVC flush pipe of required length complete all as specified 122 S&F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified 123 S&F in repairs Bib taps fancy type, brass chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified . 124 S&F in repairs Health faucet brass chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and CP wall hook including making connections and fixed in position complete all as specified 125 S&F in repair 15 mm bore fancy type bib taps long body (two in one) brass material, 15 mm bore single handle and wall flange with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified Make:- CERA Cat part No. F-1015163 or of Techno commercially equivalent model in other approved make. 126 S&F in repair brass chromium plated shower rose 125 mm size with shower arm 150 mm long with swivel joints for fixing with 15 mm bore GI pipe complete all as specified 127 S&F in repair 15 mm bore angle/ stop cock CP brass with flange complete all as specified 128 S&F in repairs stop valves fancy type, brass chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union complete all as specified 129 S&F in repairs bevelled edge mirror of size 600 x 450 mm, mounted on 6 mm thick AC plain building board or PVC board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers complete all as specified 130 S&F in repair stainless steel curtain rod of 25 mm dia and thickness not less than 0.75 mm fixed with curtain rod holder and finials etc. complete all as specified 131 S&F in repairs wash hand basin vitreous China, white, flat back (550x400mm) including cutting for and pinning ends of brackets and waste coupling of Bass CPfor basin etc with long screwed shanks and fly nuts, full threaded flange embedded in white cement incl PVC waste pipe required length complete all as specified 132 S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified 133 S&F in repair fancy type swan neck pillar taps, brass with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified 134 S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore and fixed complete all as specified 135 Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified 136 M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for applying roof treatment work finished even and smooth without using extra cement complete all as specified Note: Water proofing compound shall be measured and paid separately under relevant item of schedule A. 137 Material and labour for water proofing treatment with following application over roofs surface complete all as specified: -(i) Applying bituminous primer at the rate of 0.4 Litres/Sqm on prepared surfaces of roof. Surface shall be kept free, till the primer is impregnated and the solvent oil in the primer get evaporated.(ii) Applying one coat of blown type bitumen of grade 85/25 as binding material at the rate of 1.2 Kg/Sqm.(iii) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.0 Kg/Sqm, black finish reinforced with non woven polyester matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instruction including preparation of surface.(iv) Top of membrane shall be provide with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.Note :- (a) The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009).(b) After completion of roof treatment work ponding test for 48 hrs shall be carried out by the contractor and cost for the same shall be. 138 M&L for coated pre-polished coloured chequered cement concrete tiles made with grey cement and pigments of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over in pavement / footpath / floors over incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified
Contract Date: Mar 30, 2026 Contract Value : 46.96 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
West Bengal View Result →
18.
Defence #9895050 AOC
Tender For Provision Of 1 Toilet With 20 Iwc At A Coy Of No 4 Trg Bn Catr Of Asc Centre South Under Ge Central Bangalore.; 1 Excavation in trenches in hard / dense soil not exc 1.50m wide and notexc 1.50m in depth and getting out complete all as specified & directed. 2 Surface excavation not exc 30 cm deep and averaging 15cmdeep and getting out in hard / dense soil complete all as specified & directed. 3 Removal of excavated soilto a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified & directed. 4 Returning, filling in, including spereading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified & directed. 5 M&L for PlainCement Concrete(1:4:8) type D-2 using 40mm graded stone aggregate as. in foundation fillingand mass concrete complete all as specified & directed. 6 M&L forPre cast Cement Concrete (1:3:6)type C-1using 20 mm graded stone aggregateas in solid block masonaryexceeding 10 cm in width and setting in cement mortar (1:6) complete all as specified & directed. 7 M&L forPre cast Cement Concrete (1:3:6)type C-1using 20 mm graded stone aggregateas in solid block masonary notexceeding 10 cm in width and setting in cement mortar (1:4) complete all as specified & directed. 8 M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wallin cement mortar (1:6) finishing the surfaceseven & smooth without using extra cement complete all as specified & directed. 9 M&L forRendering 15 mm thickon brick work or concrete surfaces of wallin cement mortar (1:4) finishing the surfaceseven & smooth without using extra cement complete all as specified & directed. 10 M&L for Rendering 10mm thick on fair faces ofconcrete ceilingsurfaces in cement mortar (1:3)finishing the surfaces even & smooth withoutusing extra cement complete all as specified & directed. 11 M&L forReinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregatesas in foundations, including rafts, footings, foundation beams, plinth beams, bsaes of columns etc basement slabs, under-reamed piles and mass concrete all as specified & directed. 12 M&Lfor Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors all as specified & directed. 13 M&L for Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in columns, pillars, piers,posts and struts all as specified & directed. 14 M&L for Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in beams, chajja, cantilevers,bressummers, lintels over 1.5 mtr span all as specified & directed. 15 M&L for Formworkto sides of concrete foundations,footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for fair finished flat surfaces complete all as specified & directed. 16 M&L forForm work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide for fair finished flat surfaces of concrete complete all as specified & directed. 17 M&L forForm work to sides of pillars, posts, struts, piers, columns and stanchionsfor rough finished flat surfaces of concrete complete all as specified & directed. 18 M&L forForm work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick rough finished flat surfaces all as specified & directed. 19 M
Contract Date: Mar 27, 2026 Contract Value : 32.37 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
19.
Defence #9889677 AOC
Tender For Provision Of Soakage Pits At Fd Hosp Nimu And Provn Of Veh Washing Point For Inf Bn At Nimu Under Age (I) Nimu; 1 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/dense soil complete all as specified and directed by Engr-in-charge. 2 All as per item No 1 above but exc 1.5M and n.exc 3.0M depth 3 All as per item No 1 above but exc 3.0M and n.exc 4.5M depth 4 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables, erecting street light polesetc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge. 5 Excavation in trenches additional 1.5m or part thereof in depth beyond 1.5m for taking out pipe line etc for repairs / laying cables, erecting street light polesetc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge. 6 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting in Hard/dense soil out complete all as specified and directed by Engr-in-charge. 7 Returning, fillingin any type of soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed by Engr-in-charge.. 8 Removing excavated material (soils) to a distance exceeding 50mtr but n.exc 100m and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and directed. 9 Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-charge. 10 M & L for cement concrete type D-2 1:4:8 (using 40mm aggregate) as in foundations, filling and mass concrete incl foundations of poles complete all as directed. 11 Stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge. 12 Stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, laid dry, complete all as specified and directed by Engr-in-Charge. 13 RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge. 14 Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge. 15 M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe complete all as specified and directed by Engr-in-charge. 16 M & L Concrete bed to drain pipes 110mm including packing under, and completelysurrounding pipes with concrete after they are laid and tested; in complete all as specified and directed by Engr-in-charge. 17 M & L Cement concrete Type B2, 1:2:4 (40 mm graded aggregate) in foundations, filling and mass concrete for erecting poles etc complete all as specified and directed by Engr-in-charge. 18 M&L for Precast cememt concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed. 19 M&L 15mm plaster in one layer in CM 1:4 on stone masonary surfaces or other than fair faces ofbrick work and finished the surfaces even & smooth without using extra cement complete all as specified. 20 M & L Rendering 15mm thick in cement mortar 1 : 4 on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr-in-charge. 21 M & L Providing, cement concrete Type B1, 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings , kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 of SSR Part-II, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directedcomplete all as specified and directed by Engr-in-charge. 22 M&L Precast RCC 1:2:4 Type B1 using 20mm graded stone aggregate, in Man Hole cover slab, with & including necessary use & waste of form work for fair finished surface of concrete, set in CM 1:4, complete all as specified.. 23 Supply and fixing mild steel TMT bars 10 mm dia and over,cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed. 24 M&L TMT reinforcement bars 6mm to 8mm dia including all cutting bending binding cranking placing & binding with MS wire (ann ealed) not less than 0.9mm dia,complete all as specified. 25 Supply only Liquid water proofing compound 26 M & L Sand filling under floors or in foundations including watering and consolidationcomplete all as specified and directed by Engr-in-charge. 27 M & L Hard core Broken stone/ boulders, broken to gauge n exc 63 mm complete all as specified and directed by Engr-in-charge. 28 M & L Cement concrete 100mm type B- 2,1:2:4 (40mm graded aggregate complete all as specified and directed by Engr-in-charge. 29 M & L Cement concrete 75mm type B- 2,1:2:4 (40mm graded aggregate complete all as specified and directed by Engr-in-charge. 30 M & L Cement concreteType B2 1:2:4 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed by Engr-in-charge. 31 M&L for PCC Cement concrete 1:3:6 type B-2 using 40mm gradestone aggregate including use and waste of form work /any description complete for foundations filling of Pole all as specified and directed as Engr in charge. (for Street light Pole) 32 M & L Cement concrete Type C-2, 1:3:6 (40 mm graded aggregate)insurface channels and drains complete all as specified and directed by Engr-in-charge. 33 M&LExtra for forming fair finished drain or channel 65 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed by Engr-in-charge. 34 M & L Cement concreteType B2 1:2:4 (40 mm graded aggregate) in walls orretaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed by Engr-in-charge. 35 M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat and fair finished surfaces of concretecomplete all as specified and directed by Engr-in-charge. 36 M&L for preparation ofnewly plastered or unplastered surfaces of wall and applying two coats ofcement base paint after Priming plasteredwith alkaliresistant priming paint complete all as specified and directed. 37 S&F 2000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified and directed. 38 S & F 25mm dianipple suitable for water tank complete all as specified and directed. 39 M &L 25mm outer dia of (3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. 40 S&F 25mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 41 S&F20mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 42 Supply, laying, testing and commissioning LT Cable XLPE insulated, galvanised steel strip armoured,1100 volts grade, multistranded aluminium conductor cable of cross sectional area 25 sqmm; 3.5 core conforming to IS:7098 part-I with latest amendments upto date and making cable connections by providing suitable aluminium lugs with proper crimping and steel glands and laid in trenches / ducts / floors / roofs or through pipes with saddles and fixing screws etc complete all as specified and directed . Note for item No 42 to 45 :- (Excavation, Concrete cable protection cover and Clear Sand for cushioning will be measured and paid separately).(b) Cost of glands, aluminium cable lugs (eye lid/barrel/bottle neck type/ring type or any shape) new nut, bolt and washers of required size/description are deemed to include in this rate. 43 Ditto all as per item No 42 here in before but of size 2 core 16 sqmm (for SPNDB for street lighting ) 44 Ditto all as per item No 42 here in before but of size 4 core 16 sqmm (for TPNDB for Pressure washer) 45 Ditto all as per item No 42 here in before but of size 2 core 10 sqmm (for Street Light loop) 46 Supply and fix LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completepecified and directed by Engr in charge. 47 M&L for GI bracket not less then 1.5 mtr long made out of GI pipe 40mm dia bend to suitable radius incl pole clamps( 2 no.) made out of 30x5mm flat for fixing GI pipe bracket andnuts bolts washers and 15mm GI LG for controle cable from bottom of light fitting bracket to top of SMC boxincl painting with aluminum paint etc complete all as specified and directed by Engr in charge. 48 Supply and erect steel Tubular swaged pole complete with cast iron base plate , finial taper plug , bolts , nuts & screws as specified type 410 SP - 31 , 9 Meter long all including two coat of aluminium paint over a coat of red oxide and two coat of bituminous paint inside and outside of bottom portion up to 1.8 mtr lenghtall as specified and directed . Note :Earth work and PCC fdn will be measure and paid separetely. 49 Supply and fixSMC/PVC street light junction boxes IP 65 protection of size 0.200 x 0.250 x 0.155 m complete with 1 Nos MCB SP 10 Amp & 4 way industrial connector including clamp made out of MS flat 30x5mm connection from SMC street light junction box to street light fitting with PVC conduit 20 mm dia complete all as specified and directed by Engr-in charge. Make :- SPELS BERG/RITTAL/Sintex/Hensal or equivalent. 50 Material and labour for un reinforced pre cast concrete cable cover class LV type I, flat size 250 mm x 150 mm x 40 mm complete all as specified and as directed by the Engineer - in - Charge. 51 Sand cushioning to under ground cable complete all as specified in clause 19.75 of SSR Part - I complete all as specified and as directed by the Engineer - in - Charge. 52 Excavation in trenches by cutting of Road crossing / PCC hard standing under boundary wall for laying of Pipe/Cable including making good the existing surface with same finish to match the original finish complete all as specified and directed by Engr-in Charge. 53 Supply and fix or laying in trenches/on wall/ poles/ structures as in repairs GI tubeing light grade 50 mm dia for road crossing/ for cable protection / fixing of pigmi lights etc, of the folling size including necessary provision for cable entry if reqd in pigmi lights pole fixinf screws / clmp complete as required complete all as specified and directed by Engr in Charge. 54 M&L for Busbar chambers sheet metal powder coated IP-44 & IP67 wheather proof415 Volt 3 phasewith 4 aluminium busbar strip of rating 400 Amp 6 wayfixed on GI iron angle of size 40mm x 40mm x 5mmcomplete all as specified and directed by Engr in Charge. 55 M&L Sheet metal powder coated versatile Double door IP-44 & IP67 wheather proof415 Volt 3 phase industrial plug 5 PIN and 5 PIN socket panel with suitable MCB(2 X 415V 3 Phase 32Amp Industrial Plug) and (2 X 415V 3 Phase 32Amp Socket) with (2 X 32Amp TPNMCB) , Indicator and supporter Mild steel Powder coated withGI iron angle standsuitable for use on 415 Volt, 3 Phase ,50Hz with all accessories complete all as per specified and as directed by Engr-in-Charge. 56 S&Fsheet metal powder coated versatile Double door TPN distribution board,8 way suitable for MCBs fitted with copper bus bar rated 200 Amps, neutrallink , earth bar and din rail suitable for use on 415 Volt, 50Hz with all accessories complete all as per specified and as directed by Engr-in-Charge. 57 S&Fsheet metal powder coated versatile Double door SPN distribution board,4 way suitable for MCBs fitted with copper bus bar rated 200 Amps, neutrallink , earth bar and din rail suitable for use on 240 Volt, 50Hz with all accessories complete all as per specified and as directed by Engr-in-Charge. 58 M&L for MCB TPN 4pole 63 Amp 415V 10KA C curve Miniature circuit breaker (MCB) in distribution boardswith all accessories complete all as per specified and as directed by Engr-in-Charge. 59 M&L for MCB SPN 63 Amp, 240V with 10KA breaking capacity of C series in distribution boardswith all accessories complete all as per specified and as directed by Engr-in-Charge. 60 S&Fto MCB SP 6-32 Amp with 10KA breaking capacity of C series in distribution boardswith all accessories complete all as per specified and as directed by Engr-in-Charge. 61 M&L for Earthing complete with galvanised steel earth plate electrode (60cm×60cm× 6mm )thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not Lessthan 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completionall as per specified and as directed by Engr-in-Charge. 62 Supply, testing and commissioning heavy-duty high-pressure washer suitable for industrial and outdoor cleaning applications, equipped with a high-pressure water jet nozzle, a flexible hose pipe of approximately 15 meters or more in length, and operating at a pressure of 150 bar or above with a minimum water flow rate of 13 litres per minute. The unit operates on a 400 Volts, 3-phase power supply or higher and shall be supplied complete with all standard accessories such asVariably adjustable fan jet spray lance (Stainless steel) Functions Integrated cleaning tank Detergent adjustment Hose reel Auto Stop Self-priming function Accessories: Pressure gauge (built-in) Variably adjustable fan jet spray lance Water filter (built-in) Handgun 15 meter hose reel (built-in) complete all as specified and directed by Engr in Charge. (Make Bosch Model No.- High-pressure Washer GHP 8-15 XD or Equivalent of same specificiation & Specification sheet of product has been attached )
Contract Date: Mar 26, 2026 Contract Value : 34.86 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu And Kashmir View Result →
20.
Public Administrative Department #9864998 AOC
Proposed Auditorium Chair, Audio Video, Stage Lighting And Drapery For The Auditorium Of Sangeetsurya Keshavrao Bhosale Natyagruha , Supply,Installtion,Testing & Commissioning Of 200W Led Parcan Light With Latest Rdm Technology For User Friendly Operation With Below Specifications: • Light Source : 200W Single Cob Led Source • Power Factor : >0.95 @ 230V Ac 50Hz • Color Temperature : 3200K With Cri & Tlci Value > 90 • Minimum 3 Internal Fan Operation Mode With Fan Speed Control Option. • Power Cable: 3 Core 1 Sq. Mm. Copper Pvc Insulated • Channels: 1/2 Dmx-512 Channel Modes • Beam Angle: 9°/15°/20°/25°/30° Manually Selectable • Control Mode: Rdm, Dmx512 & Manual, Master/Slave, Auto Run • Fully Rdm Compliant In Dmx Mode For The Lighting Console Mentioned In This Project. • Lux @ 2M: > 40,000 @ 9° Beam Angle • Flickering Rate : More Than 10000 Fps • Dimming: 0 - 100% Electronic Dimming • Function: Strobe, Dimming •Housing:Spunaluminiumhousingwithblackepoxypolysterpowder Coated Finish. •Accessoryslotforgelframeandbarndoorshouldbeavailableorelse Fixture Will Be Rejected. • Power And Dmx: Loop In And Loop Out Compulsary • Dmx In & Out Through : 5 Pin Xlr Connectors • Certification: Ce / Bis , Supply,Installtion,Testing & Commissioning Of4 X 100W Led Blinder Effect Lightwithlatestrdmtechnologyforuserfriendlyoperationwithbelow Specifications: • Light Source : Quad Led Cob Source • Power Factor : >0.95 @ 230V Ac 50Hz • Color Temerature : 3200K, Cri & Tlci Value > 95 • R9 Value > 94 • Minimum 3 Internal Fan Operation Mode With Fan Speed Control Option. • Power Cable: 3 Core 1 Sq. Mm. Copper Pvc Insulated • Channels: 4/8 Dmx-512 Channel Modes • Beam Angle : 40° • Control Mode: Rdm, Dmx512 & Manual, Master/Slave, Auto Run •Accessoryslotforgelframeandbarndoorshouldbeavailableorelse Fixture Will Be Rejected. • Fully Rdm Compliant In Dmx Mode For The Lighting Console Mentioned In This Project. • Lux Output At 2 Mtr : > 10,000 Lux@ 40° • Flickering Rate : More Than 10000 Fps • Dimming: 0 - 100% Electronic Dimming • Power And Dmx: Loop In And Loop Out Compulsary • Dmx In & Out Through : 5 Pin Xlr Connectors • Certification: Ce / Bis , Supply,Installtion,Testing & Commissioning Of54 X 3W Led Par Light With Latest Rdm Technology For User Friendly Operation With Below Specifications: • Base Color Rgbw Color Mixing • Led Configuration : Multiple Nos Individual Rgbw Led Configuartion • Power Cable: 3 Core 1 Sq. Mm. Copper Pvc Insulated • Minimum 3 Internal Fan Operation Mode With Fan Speed Control Option. • Channels: 8 Dmx-512 • Beam Angle: 15° •Controlmode:Rdm, Dmx512&Manual,Master/Slave, Autorun,Sound Active • Fully Rdm Compliant In Dmx Mode For The Lighting Console Mentioned In This Project. • Lux @ 2M: >10,500 @ 15° Beam Angle • Dimming: 0 - 100% Electronic Dimming • Function: Strobe, Dimming, Sound Active And Master Slave. •Housing:Diecastedaluminiumormetalhousingwithblackepoxy Polyster Powder Coated Finish. •Accessoryslotforgelframeandbarndoorshouldbeavailableorelse Fixture Will Be Rejected. • Power And Dmx: Loop In And Loop Out Compulsary • Dmx In & Out Through : 5 Pin Xlr Connectors • Certification: Ce / Bis , Supply,Installtion,Testing & Commissioning Of300w Led Profile Spot Light With Latest Rdm Technology For User Friendly Operation With Below Specifications: • Light Source : Single Led Cob Source • Power Factor : >0.95 @ 230V Ac 50Hz • Color Temerature : 3200K, Cri & Tlci Value > 95 • R9 Value > 94 • Minimum 3 Internal Fan Operation Mode With Fan Speed Control Option. • Power Cable: 3 Core 1 Sq. Mm. Copper Pvc Insulated • Channels: 1/2/3 Dmx-512 Channel Modes • Beam Angle : 19° Or 15° • Control Mode: Rdm, Dmx512 & Manual, Master/Slave, Auto Run • Fully Rdm Compliant In Dmx Mode For The Lighting Console Mentioned In This Project. • Lux Output At 2 Mtr : > 27,500 Lux@ 19° Or 15° • Flickering Rate : More Than 10000 Fps • Dimming: 0 - 100% Electronic Dimming • 4 Beam Shaping Shutters •Accessoryslotforgoboandgoboholder,Iris &Colorframeshouldbe Available Or Else Fixture Will Be Rejected. • Housing: Metal Housing With Black Epoxy Polyster Powder Coated Finish Or Pvc Body With Matt Black Finish • Power And Dmx: Loop In And Loop Out Compulsary • Dmx In & Out Through : 5 Pin Xlr Connectors • Certification: Ce / Bis , Supply,Installtion,Testing & Commissioning Of 200W Fresnel Spot Light With Minimum Following Technical Specifications ? Light Source : Single Led Cob Source ? Color Temerature : 3200K ? Cri & Tlci : > 95 ? Beam Angle : 9° - 52° Manual Zoom ? Focusing Mechanism Of Lights Should Be Ss/Brass Lead Screw Type For Step Less Smooth Zooming. Sliding Type Focusing Mechanism Shall Not Be Acceptable. ? Fresnel Lens Dia Should Not Lesser Than 200Mm ? Zooming Function Of Fresnel Should Be Through Pole Operated Yoke (Pos). ? Lux Output At 2 Mtr : > 38,500 Lux @ 9° &> 2,100 Lux @ 52° ? Power Supply Driver : Ip65 Or Higher Grade With Pf >0.96 @ 230V ? Flickering Rate : More Than 20000 Fps ? Accessory Slot For Gel Frame And Gel Filter Frame Should Be Available Or Else Fixture Will Be Rejected. ? Control Protocol : Dmx & Manual ? Fully Rdm Compliant In Dmx Mode ?Manualcontrol Viatouch Pad.Tactile Switchformanualcontrolfixture Will Be Rejected. , Supply,Installtion,Testing & Commissioning Of 400W Fresnel Spot Light With Minimum Following Technical Specifications ? Light Source : Single Led Cob Source ? Color Temerature : 3200K ? Cri & Tlci : > 95 ? Beam Angle : 9° - 52° Manual Zoom ? Focusing Mechanism Of Lights Should Be Ss/Brass Lead Screw Type For Step Less Smooth Zooming. Sliding Type Focusing Mechanism Shall Not Be Acceptable. ? Fresnel Lens Dia Should Not Lesser Than 300Mm ? Zooming Function Of Fresnel Should Be Through Pole Operated Yoke (Pos). ? Lux Output At 2 Mtr : > 70,500 Lux @ 9° &> 4,100 Lux @ 52° ? Power Supply Driver : Ip65 Or Higher Grade With Pf >0.96 @ 230V ? Flickering Rate : More Than 20000 Fps ? Accessory Slot For Gel Frame And Gel Filter Frame Should Be Available Or Else Fixture Will Be Rejected. ? Control Protocol : Dmx & Manual ? Fully Rdm Compliant In Dmx Mode ?Manualcontrol Viatouch Pad.Tactile Switchformanualcontrolfixture Will Be Rejected. , Supply,Installtion,Testing&Commissioningof200wledpcspotlight, Color Temperature3200k With Motorised Zoomlatest Rdm Technology For User Friendly Operation With Below Specifications: • Lamp Source : 200W, 3200K Led • Power Factor : >0.95 @ 230V Ac 50Hz, • Cri & Tlci Value > 95, R9 Value > 94, • Minimum 3 Internal Fan Operation Mode With Fan Speed Control Option Or Else Fixture Will Be Rejected. • Channels: 2/3/5 Dmx-512 Channel Modes, • Beam Angle : 22° To 50° Motorised Zoom, • Control Mode: Rdm, Dmx512 & Manual • Fully Rdm Compliant In Dmx Mode For The Lighting Console Mentioned In This Project. • Lux Output At 2 Mtr : > 4,500 Lux@ 22° And > 1,000 Lux@ 50° • Flickering Rate : More Than 10000 Fps, • Dimming: 0 - 100% Electronic Dimming, •Dualaccessoryslotforinsertingaccessories Shouldbe Availableorelse Fixture Will Be Rejected. • Housing:Engineered Pastic Housing With Matt Black Finish, • Power And Dmx: Loop In And Loop Out Compulsary, • Dmx In & Out Through : 5 Pin Xlr Connectors, • Certification: Bis , Supply,Installtion,Testing & Commissioning Of Cecertified Led Rgbw Cycloramawashlightwithrdmprotocolandlasercutaluminiumbody Dulyepoxypolyesterpowdercoatedinblackmatttexturefinishwith Following Specifications - •Led:480X0.5Wrgbwled(120R+120G+120B+120W)Nichiaor Lumiled Make Led • Beam Angle : 96° • Detachable Assymmetric Reflector With 64°, 62° For Uniform Wash. • Light Out Put : 3000 Lux At 1 Mtrs Without Assymmetric Reflector. •Userinterface:4Noshighprecisiontactiletypeselectorswitchwith Seven Segment Display • Fully Rdm Compliant When In Dmx Mode • Dimming : 0 To 100% 8 Bit Linear Dimming • Dmx Data In / Out: 5 Pin Locking Xlr • Natural Cooling System. No Fan, No Noise. • 2.5 M Power In + 0.5 M Power Out Or 3 Mtr 3Core 1Mm² Frls & Isi Mark Cable With 3Pin Iec Male Plug • 3 Mtr Dmx Loop Cable With Cable Mount 5 Pin Locking Xlr • Lm 79 & Lm 80 Certificates Should Be Provided • Ce Certificate Should Be Enclosed To Ensure The Required Quality And Safety Of The Products. , Supply,Installtion,Testing & Commissioning Of 300W Led Beam, Spot, Wash Moving Light, Cmy + Cto Color Wheel To Achieve Desired Color With Rdm Protocol And Hi Grade Plastic Body Black Color With Following Specifications - • Zoom Angle : 7°~31° Motorised Zoom • Pan Angle 540° & Tilt Angle 270° • Light Out Put : >30,000 Lux At 2 Mtrs, • Color Wheel : 3 Cmy + 1 Cto Color Wheel + Minimum 7 Colors And Open Or More, • Fixed Gobo Wheel : Minimum 10 Fixed Gobos Or More • Rotating Gobo Wheel : Minimum 6 Rotating Gobos Or More • User Interface : 4 Nos High Precision Membrane Type Selector Switch With Lcd Display, • Fully Rdm Compliant When In Dmx Mode, • Dmx Data In / Out: 5 Pin Locking Xlr, • 3 Mtr Dmx Loop Cable With Cable Mount 5 Pin Locking Xlr, • Certification: Bis , Supply,Installtion,Testing & Commissioning Of 1500W Haze Machine, Warm Uptime30seconds,Wire,Remote,Smokeoutput20000cuft/Minat5mtr, 3.5L Tank Capacity. Output : 20000Cu.Ft/Min. , Supply,Installtion,Testing & Commissioning Of Die Cast Aluminium C - Clamp With Safety Chain Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish And Safe Working Load Of 100Kg With Below Specifications. • Lock - Ms Threaded Galvanized Lock Key, • Plastic Glass Filled Nylon Moulded M6 Key. • Receptacle - 28Mm Standard Tv Spigot. • Safety - Ms Galvanized Chain With Pin. • Finish - Pretreated And Black Epoxy Polyester Powder Coated. • Self-Weight - 0.54Kg , Supply,Installtion,Testing & Commissioning Of Safety Bond With Lock Clip 1.5 Mtr Long Made With Twisted Pair Of Gi Wire Rope, 2Mm Or 3Mm Thickness With Sleeve To Be Fixed Around The Grid To Avoid Fall Of The Material In Case If The C Clamp Is Not Locked Properly. Swl 150Kgs. , Supply,Installtion,Testing&Commissioningof79mmroundidentification Name Plate Duly Epoxy Polyester Powder Coated In Matt Texture Finish. , Supply,Installtion,Testing&Commissioningofmsctrackofsize50x40 Mm Size With 3Mm Thickness Or Higher Size, Self-Weight 3.3Kg Per Mtr. All The Materials Under Gone Through 7 Tank Process With Various Chemical Treatmenttokeepthemrustfreewithanddulyepoxypolyesterpowder Coated In Black Matt Texture Finish. , Supply,Installtion,Testing & Commissioning Of Customized Ms Suspenders Made Up Of • Ms Fish Plate 150 X 150 X 6 Mm With Hardware’S If Required As Per Site Condition • Ms Angle 40 X 40 X 5 Mm Or Higher Size Required Length As Per Site Condition To Hold The C Track Rigidly Held With Swl Of 200Kg. (As Per Site Requirement). • Height Adjustable M12 Stud Of Suitable Length As Per Site Requirement Along With Suitable Hardware’S With Pipe Coupler Clamp. (As Per Site Requirement). • All The Materials Under Gone Through 7 Tank Process With Various Chemical Treatment To Keep Them Rust Free With And Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish. , Supply,Installtion,Testing & Commissioning Of Ce Certified Motorised Stage Lightbarsuitablelength12mtrsaspersiterequiremnents,Suitable Capacity3phaseacmotorwithdcbrake&Gearboxwithblackepoxy Polyester Powder Coated With Following Specifications - • 40Nb, 48Mm Od Dual Barrel Dual Construction Arrangement With 75X6mm Ms Flat In Every 2 M And With 40X75 Cable Trunking With Lid. • Frill Bar Attachement. •Msfabricatedcableretractormadeupofcrcamssheet20swg 1300Mm Each Length With Hinge Rod • Specially Designed Compact 80:1 Worm Reduction Gear Box, B5 Flange. • Double Cam Type Upper And Lower Limit Controller 5Mm, 6X19 Gi Wire Rope Preformed For Lifting The Light Bar • Pile Winding Type Winch With Ms Circular Plates For Rope Winding • Safe Working Load 180 Kg , Supply,Installtion,Testing&Commissioningoffrontofhouselightbar, Length 13 Mtrs Made Using Ms 40Nbpipe Dual Barrel Construction Arrangement Undergone Through Various Chemical Treatment To Keep Them Rustfreeanddulyepoxypolyesterpowdercoatedinblackmatttexture Finish With Below Specifications: • Dual Barrel Light Bar Equipped With 40X75x40 Cable Trenching Arrangement With Lid For Better Aesthetic Look And Cable Safety. • Dual Barrel Pipe Construction Welded With Ms Flat In Every 1 Mtr For Better Strength • With Suitable Suspenders To Fix The Light Bar With Every 2Mtr Pitch. , Supply,Installtion,Testing & Commissioning Of Ce Certified Motorised Stage Utility / Props Barsuitablelength 12Mtrs, Suitablecapacity 3Phase Ac Motor With Dc Brake. & Gear Box With Black Epoxy Polyester Powder Coated With Following Specifications - • 40Nb, 48Mm Od Dual Barrel Dual Construction Arrangement With 75X6mm Ms Flat In Every 2 M. • Specially Designed Compact 80:1 Worm Reduction Gear Box, B5 Flange. • Double Cam Type Upper And Lower Limit Controller 5Mm, 6X19 Gi Wire Rope Preformed For Lifting The Light Bar • Pile Winding Type Winch With Ms Circular Plates For Rope Winding • Safe Working Load 180 Kg , Supply,Installtion,Testing & Commissioning Of Ce Certified Motorised Stage Frill Bar Suitable Length 12 Mtrs, Suitable Capacity 3 Phase Ac Motor With Dcbrake.&Gearboxwithblackepoxypolyesterpowdercoatedwith Following Specifications - • 40Nb, 48Mm Od Dual Barrel Dual Construction Arrangement With 75X6mm Ms Flat In Every 2 M. • Specially Designed Compact 80:1 Worm Reduction Gear Box, B5 Flange. • Double Cam Type Upper And Lower Limit Controller 5Mm, 6X19 Gi Wire Rope Preformed For Lifting The Light Bar • Pile Winding Type Winch With Ms Circular Plates For Rope Winding • Safe Working Load 180 Kg , Supply,Installtion,Testing&Commissioningofmssidelightingladderof Suitable Length And Width (Min 2400 Mm Height & 600 Mm Width) • Made Using 40Nb, 48Mm Od, 2Mm Thickness Ms Pipe • Suitable Suspender And Clamps Made With Ms Angle Of Size 40X40x5 Mm Thick Or Higher Size • Inverted 4-Wheeler Trolley With Flexi Adaptor Clamp, • Heavy Duty Ladder Track To Be Laid Throughout The Depth Of The Stage. • 360° Rotatable And Can Move In Unidirectional • All The Materials Under Gone Through 7 Tank Process With Various Chemical Treatmenttokeepthemrustfreewithanddulyepoxypolyesterpowder Coated In Black Matt Texture Finish. , Supply,Installtion,Testing&Commissioningof3/4Th Ms Fohside Lighting Ladder / Gallery Lighting Ladder Of Suitable Length And Width (Min 1500 Mm Height&600Mmwidth)Allthematerialsundergonethrough7tank Processwithvariouschemicaltreatmenttokeepthemrustfreewith And Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish. , Supply,Installtion,Testing&Commissioningofmsfabricated4way10a, 250Va.C,Iec,Lightingjunctionboxmadeupof22swgcrcaforled Lighting Fixtures With Pipe Clamp Arrangement For Fixing On Pipe Grid Or Raul Plugarrangementforwall/Floorfixing,Dulyblackepoxypolyesterpowder Coated Texture Finish. , Supply,Installtion,Testing&Commissioningofmsfabricated2way10a, 250V A.C, Iec,Junction Box Made Up Of 22Swg Crca With Rocker Switch To Power Up Splitter And Console With Pipe Clamp On Pipe Grid Arrangement For Fixingorraulplugarrangementforwall/Floorfixing,Dulyblackepoxy Polyester Powder Coated Texture Finish. , Supply,Installtion,Testing&Commissioningofmsfabricated5pindmx Signalinjunctionboxfittedwith5pindmxmalesocket,Junctionbox Madeupof22swgcrca,Withpipeclamponpipegridarrangementfor Fixing Or Raul Plug Arrangement For Wall/Floor Fixing, Black Epoxy Polyester Powder Coated, Duly Black Epoxy Polyester Powder Coated Texture Finish. , Supply,Installtion,Testing&Commissioningofmsfabricated5pindmx Signal Out Junction Box Fitted With 5 Pin Dmx Female Socket, Junction Box Madeupof22swgcrca,Withpipeclamponpipegridarrangementfor Fixing Or Raul Plug Arrangement For Wall/Floor Fixing, Black Epoxy Polyester Powder Coated, Duly Black Epoxy Polyester Powder Coated Texture Finish. , Supply,Installtion,Testing & Commissioning Of Fabricated 5 Pin Dmx Signal Loop Junction Box Fitted With 5 Pin Dmx Male & Female Socket With 0.3 Mtr Dmx Loop Cable Fitted With 5 Pin Dmx Cable Mount Plug, Junction Boxmade Up Of 22Swg Crca, With Pipe Clamp On Pipe Grid Arrangement For Fixing Or Raulplugarrangement Forwall/Floorfixing,Black Epoxypolyesterpowder Coated, Duly Black Epoxy Polyester Powder Coated Texture Finish. , Supply,Installtion,Testing & Commissioning Of Well Designed And Engineered Rack Mount Chocolate Brown Epoxy Polyester Coated Type Power Distribution Centrepanelwithnecessarymeteringlikevoltmeterammeter,Selector Switch,Indicators,Outgoingfeedersandmainincomer100amccband Emergencytriparrangementwithshuntreleaseand42waymcbpanel Rackmount, Internallywiredtocontrolindividualdirectlightpointswith Suitablemcbswithproperearthingandsuitablebrassglandsforouting Power Cables With Rack. , Supply,Installtion,Testing & Commissioning Of Auxiliary Marshalling Box For Power And Signal Cable Termination In Grid Level And In Motorised Light Bar • Ce Marked Fc/Pg Cable Entry Gland Required Nos As Per Cable Entry. •Mschannelarrangingtofixterminalconnector,Requirednoswith Separation Plate And Each End Is Completed With Adding End Plate With End Cap. • Grey Terminal Connector With Each Line Having P, N, E Indication For Each Line Incoming And Out Going Cable Connectors. • Box Door Must Be Made With Hingeable Door With Screw Lock. • Made Up Of 20Swg Crca Sheet Undergone Through 7 Tank Process With Variouschemicaltreatmenttokeepthemrustfree,Dulyepoxypolyester Powder Coated With Matt Black Texture Finish. , Supply,Installtion,Testing&Commissioningofpowermarshallingboxfor Power Cable Termination In Grid Level. • Ce Marked Fc/Pg Cable Entry Gland Required Nos As Per Cable Entry. •Mschannelarrangingtofixterminalconnector,Requirednoswith Separation Plate And Each End Is Completed With Adding End Plate With End Cap. • Grey Terminal Connector With Each Line Having P, N, E Indication For Each Line Incoming And Out Going Cable Connectors. • Box Door Must Be Made With Hingeable Door With Screw Lock. • Made Up Of 20Swg Crca Sheet Undergone Through 7 Tank Process With Variouschemicaltreatmenttokeepthemrustfree,Dulyepoxypolyester Powder Coated With Matt Black Texture Finish. , Supply,Installtion,Testing & Commissioning Of Motor Cable Termination Box For Power Cable Termination At Grid Level. • Ce Certified Fc/Pg 11 & 13.5 Cable Entry Gland Required Nos As Per Cable Entry. •Mschannelarrangingtofixgreyterminalconnector,Requirednoswith Separation Plate And Each End Is Completed With Adding End Plate With End Cap. •Greyterminalconnectorwitheachlinehavingl1,L2,L3,E,6,2,4 Indication For Each Line Incoming And Outgoing Cable Connectors (L1, L2, L3, E For Power Supply & 6 , 2 , 4 For Limit Switch Connection) • Box Door Must Be Made With Hingeable Door With Screw Lock. •Gridmountfixingarrangementforfixingongridoranchorfastenerfor Wall/Floor Fixing •Msboxemadeupof20swgcrcasheetundergonethrough7tank Process With Various Chemical Treatment To Keep Them Rust Free, Duly Epoxy Polyester Powder Coated With Matt Black Texture Finish. , Supply,Installtion,Testing&Commissioningofmsfabricatedcombined6 Way Motor Control Center Panel Cum Remote Controlpanel For Light Bar, Frillbarandutilitybarsystemmadeupof14swg/16Swg/18Swg Crcasheetundergonethrough7tankprocesswithvariouschemical Treatment To Keep Them Rust Free, Duly Epoxy Polyester Powder Coated With Matt Seaman’S Grey Texture Finish With Following Specifications. • 16A Tp Or Tpn Incomer. • Main Contactor Of 9A 240V 4 Pole Contactor With 04 -06A Over Load Relay For Safety • 24V 4 Pole Low Voltage Contactors • 240V / 24 V Step-Down Transformer For Low Voltage Contactors • All The Frls Pvc Isi Marking Cables Inside The Panel Routed Through Pvc Gray Color Cable Trough. • Red Color Mushroom Head Push Button For Emergency Stop • Yellow Color Reset Push Button • Master Sector Actuator Switch With 3 Position Up, Down & Off • Spring Return Selector Switchfor Each Hoist With Up & Down Indication. • All The Cables Inside The Panel Routed Through Pvc Gray Color Cable Trough. • Panel Including Wiring With Proper Earthing. , Supply,Installtion,Testing & Commissioning Of Rdm Compatible Dmx Splitter Unit With Minimum Following Specifications. ? 1 Nos 5 Pin Dmx In Socket And 8 Nos 5 Pin Dmx Out Socket ? In And Out Signal Optically Isolated ? Led Indicator For Check The Signal Flow In Output. ?Suitable For Standard 19” Cabinet ? Duly Black Epoxy Polyester Powder Coated Texture Finish. , Supply,Installtion,Testing&Commissioningof2048channel4universe Lighting Controller With ? Builtin Artnet & Wifi, ? 40 Multifunction Fixture Faders ? 10 Playback Faders With 9.7 Touch Screen, ? Fixture Library & Fx Generator, ? 10 Cue-Stacks & 10 Chases, ? Offline Software And App Control , Supply,Installtion,Testing&Commissioningof5pinxlrmale/Female Connectorsofmadeupofextrahightemperatureresistantinsulator Material, Larger Solder Contacts For Easier Termination. , Supply,Installtion,Testing&Commissioningof5pinxlrterminationplug Madeupofextrahightemperatureresistantinsulatormaterial,Larger Solder Contacts For Easier Termination With 120 Ohm Resister With 0.25Watt For Signal Termination. , Supply,Installtion,Testing&Commissioningofpvccopperunarmoured Flexiblefrlsinsulatedmulticorecable1100vgradeconfirmingtois694 Size 3Cx1.5 Sq Mm. , Supply,Installtion,Testing&Commissioningofpvccopperunarmoured Flexiblefrlsinsulatedmulticorecable1100vgradeconfirmingtois694 Size 12Cx1.5 Sq Mm. , Supply,Installtion,Testing&Commissioningofpvccopperunarmoured Flexiblefrlsinsulatedmulticorecable1100vgradeconfirmingtois694 Size 4Cx 4 Sq Mm. , Supply,Installtion,Testing&Commissioningofpvccopperunarmoured Flexiblefrlsinsulatedmulticorecable1100vgradeconfirmingtois694 Size 7Cx1.5 Sq Mm. , Supply,Installtion,Testing & Commissioning Of Fr Grade Dmx Signal 4 Core + Ground Shieldingcable With Ce Mark For The Signal Network. , Supply,Installtion,Testing & Commissioning Of Ms Perforated Tray Of Size 40 X 75 X 40Mm & 1.6 Mm Thickness Undergone Through 7 Tank Process With Variouschemicaltreatmenttokeepthemrustfree,Dulyepoxypolyester Powder Coated With Matt Black Texture Finish Along With Clamping Arrangement. , Supply,Installtion,Testing & Commissioning Of Ms Perforated Tray Of Size 40 X 150 X 40Mm & 1.6 Mm Thickness Undergone Through 7 Tank Process With Variouschemicaltreatmenttokeepthemrustfree,Dulyepoxypolyester Powder Coated With Matt Black Texture Finish Along With Clamping Arrangement. , Supply,Installtion,Testing & Commissioning Of Internal Earthing Copper Bare Conductor Of Size 14 Swg For Power Network Related To Work Coming Under Our Scope. , Drappery Works , Supply,Installtion,Testing & Commissioning Of Main Valance Bar, Length 15 Mtrs Made Using 40Nb, 48Mm Od Construction Arrangement 2Mm Thickness Undergone Through Various Chemical Treatment To Keep Them Rust Free And Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish With Suitable Suspenders. , Supply,Installtion,Testing & Commissioning Of Main Curtain Track System 15 Mtrs Long, Center Parting With Overlap Of 0.9Mtr Arrangement Undergone Through Various Chemical Treatment To Keep Them Rust Free And Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish With Below Specifications: • Heavy Duty Curtain Track Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish. • 1.5 Hp Motor, 3 Phase Motor. • Gi Wire Ropes With Steel Core At Center. • Curtain Holding Trolliesplaced Uniformly At Specific Interval Of 200Mm /250 Mm Throughout The Track. • Diverter Pulley • Ms Yellow Passivized Routing Pulleys With Ball Bearing For Smoother Noiseless Movement 165Mm For Outer Diameter, 145Mm Diameter At Groove Base With 12Mm Pulley Thickness. • All The Materials Under Gone Through 7 Tank Process With Various Chemical Treatment To Keep Them Rust Free With And Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish. , Supply,Installtion,Testing & Commissioning Of Mid & Rear Curtain Track System 15 Mtrs Long, Center Parting With Overlap Of 0.9Mtr Arrangement Undergone Through Various Chemical Treatment To Keep Them Rust Free And Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish With Below Specifications: • Heavy Duty Curtain Track Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish. • 1.5 Hp Motor, 3 Phase Motor. • Gi Wire Ropes With Steel Core At Center. • Curtain Holding Trolliesplaced Uniformly At Specific Interval Of 200Mm /250 Mm Throughout The Track. • Diverter Pulley • Ms Yellow Passivized Routing Pulleys With Ball Bearing For Smoother Noiseless Movement 165Mm For Outer Diameter, 145Mm Diameter At Groove Base With 12Mm Pulley Thickness. • All The Materials Under Gone Through 7 Tank Process With Various Chemical Treatment To Keep Them Rust Free With And Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish. , Supply,Installtion,Testing & Commissioning Of Ms, Wing Frame Made Out Of 25X25mm Or Higher Size Made Of Ms Square Pipe With 2Mm In Thickness Undergone Through Various Chemical Treatment To Keep Them Rust Free And Duly Powder Coated In Black Matt Texture Finish With Below Specifications: • Wing Frame Size 5.5 X 1.5Mtr • 1.5Meter Wing Track Of 48X84mm With Grid Mount Brackets Made Of40x50x40mm C Track, • Pivotable 4 Wheeled Suspension Trolley, • Adjustable Floor Locking Screw Jacks With Rubber Grips, • Inverted 4-Wheeler Trolley With Flexi Adaptor Clamp, • Heavy Duty Wing Track To Be Laid For Minimum Length Of 1.5Mtr, Along The Width Of The Stage. • 360° Rotatable And Can Move In Unidirectional • All The Materials Under Gone Through 7 Tank Process With Various Chemical Treatment To Keep Them Rust Free With And Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish. , Supply,Installtion,Testing & Commissioning Of Cyclorama Frame Arrangement Of Size 12 Mtr X 5 Mtr Undergone Through Various Chemical Treatment To Keep Them Rust Free And Duly Powder Coated In Black Matt Texture Finish With Below Specifications: • Heavy Duty Cyclorama Track Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish To Use As Straight Cyclorama Track • Ms Fabricated Grid/Wall Mount Bracket Constructed Of C Track Of Dimension 40X50x40mm Duly Powder Coated To Hold The Cyclorama Track, • Ms Fabricated Tie Down Railing Cut Length 3 Mtr Duly Powder Coated To Keep The Cyclorama In Drum Tight Arrangement, • 2 Wheeler Trolley Placed Uniformly At Specific Interval Of 200Mm/250Mm Throughout The Track To Hold The Cyclorama Screen • Ms Powder Coated Leading Edge Pipe Of 25Nb, 33.4Mm Od, 2Mm Thickness To Keep The Cyclorama In Drum Tight Arrangement. • All The Ms Materials Under Gone Through 7 Tank Process With Various Chemical Treatment To Keep Them Rust Free With And Duly Epoxy Polyester Powder Coated In Black Matt Texture Finish. , Supply,Installtion,Testing & Commissioning Of Motor Cable Termination Box For Power Cable Termination At Grid Level. • Ce Certified Fc/Pg 11 & 13.5 Cable Entry Gland Required Nos As Per Cable Entry. • Ms Channel Arranging To Fix Grey Terminal Connector, Required Nos With Separation Plate And Each End Is Completed With Adding End Plate With End Cap. • Grey Terminal Connector With Each Line Having L1, L2, L3, E, 6 , 2 , 4 Indication For Each Line Incoming And Outgoing Cable Connectors (L1, L2, L3, E For Power Supply & 6 , 2 , 4 For Limit Switch Connection) • Box Door Must Be Made With Hingeable Door With Screw Lock. • Grid Mount Fixing Arrangement For Fixing On Grid Or Anchor Fastener For Wall/Floor Fixing • Ms Boxe Made Up Of 20Swg Crca Sheet Undergone Through 7 Tank Process With Various Chemical Treatment To Keep Them Rust Free, Duly Epoxy Polyester Powder Coated With Matt Black Texture Finish. , Supply,Installtion,Testing & Commissioning Of Ms Fabricated Combined 3 Way Motor Control Center Panel Cum Remote Control Panel For Curtain System Made Up Of 14Swg / 16Swg / 18 Swg Crca Sheet Undergone Through 7 Tank Process With Various Chemical Treatment To Keep Them Rust Free, Duly Epoxy Polyester Powder Coated With Matt Seaman’S Grey Texture Finish With Following Specifications. • 16A Tp Or Tpn Incomer. • Main Contactor Of 9A 240V 4 Pole Contactor With 04 -06A Over Load Relay For Safety • 24V 4 Pole Low Voltage Contactors • 240V / 24 V Step-Down Transformer For Low Voltage Contactors • All The Frls Pvc Isi Marking Cables Inside The Panel Routed Through Pvc Gray Color Cable Trough. • Red Color Mushroom Head Push Button For Emergency Stop • Yellow Color Reset Push Button • Master Sector Actuator Switch With 3 Position Up, Down & Off • Spring Return Selector Switchfor Each Hoist With Up & Down Indication. • All The Cables Inside The Panel Routed Through Pvc Gray Color Cable Trough. • Panel Including Wiring With Proper Earthing. , Main Valance Fabric : Supply,Installtion,Testing & Commissioning Of Fire Retardant Velvette Fabric100% (2 Times Of The Finished Dimension) Gathering As Per The Approved Patern And Colour, Not Less Than 300 Gsm, Duly Stitched Along Witheyelets. Size : 15 X 1.3 Meter , Main Curtain Fabric : Supply,Installtion,Testing & Commissioning Of Fire Retardant Velvette Fabric With Lining 100% (2 Times Of The Finished Dimension) Gathering As Per The Approved Patern And Colour, Not Less Than 300 Gsm, Duly Stitched Along Witheyelets. Size : 16 X 6 Meter , Rear Curtain Fabric : Supply,Installtion,Testing & Commissioning Of Fire Retardant Cotton Fabric 50% Gathering For As Per The Approved Patern And Colour, Not Less Than 250 Gsm, Duly Stitched Along With Eyelets. Size : 16 X 6 Meter , Frill Fabric :Supply,Installtion,Testing & Commissioning Of Fire Retardant Cotton Fabric 50% Gathering For As Per The Approved Patern And Colour, Not Less Than 250 Gsm, Duly Stitched Along With Eyelets. Size : 12 X 1.3 Meter , Wing Fabric :Supply,Installtion,Testing & Commissioning Of Fire Retardant Cotton Fabric 0% Gathering For As Per The Approved Patern And Colour, Not Less Than 250 Gsm, Duly Stitched Along With Eyelets. Size : 5.5 X 3.1 Meter , Cyclorama :Supply,Installtion,Testing & Commissioning Of Perforated Plastic Cyclorama Screen With Zero Gain, Off White, With Eyelets Along All Four Sides, Perforated Plastic Screen With Eyelets.Size : 12 X 5 Meter , Supply,Installtion,Testing & Commissioning Of Pvc Copper Unarmoured Flexible Frls Insulated Multicore Cable 1100V Grade Confirming To Is694 Size 4Cx 4 Sq Mm. , Supply,Installtion,Testing & Commissioning Ofpvc Copper Unarmoured Flexible Frls Insulated Multicore Cable 1100V Grade Confirming To Is694 Size 7Cx1.5 Sq Mm. , Audio Video , Supply , Installation , Testing And Commissioning Of Projector Laser Projetor 10000 Lumens With Suitable Lens & Ceiling Mount With Edge Blending Image Stiching Software , Supply , Installation , Testing And Commissioning Ofprojection Screen -Matte White 1.0 Gain . Approx Size 30 Ft X 12 Ft With Required Support Structure For Mounting. , Audio , Supply Of Front-Of- House Left And Right Clusters With A 14 Lf Driver Or Better And Multiple Mf/Hf Drivers (More Than 4), Biamplified 2 Or 3 Way Array Loudspeaker System; With Individual Module Free Field Frequency Range (-10Db) Of 55Hz - 18Khz Or Better & Continuous Power Handling Of >= 750W Lf + 150W Mf/Hf. The Loudspeaker Module Shall Have A Max. Spl (Peak) Of Mf/Hf>= 130 Or Better. It Should Have Horizontal Near Dispersion Pattern Of 70º Or Better, Vertical Dispersion Of The Array Shall Be 80 Degrees Or Better. , Supply Of Front-Of- House Left And Right Clusters With A 14 Lf Driver Or Better And Multiple Mf/Hf Drivers (More Than 4), Biamplified 2 Or 3 Way Array Loudspeaker System; With Individual Module Free Field Frequency Range (-10Db) Of 55Hz - 18Khz Or Better & Continuous Power Handling Of >= 750W Lf + 150W Mf/Hf. The Loudspeaker Module Shall Have A Max. Spl (Peak) Of Mf/Hf>= 130 Or Better. It Should Have Horizontal Near Dispersion Pattern Of 70º Or Better, Vertical Dispersion Of The Array Shall Be 80 Degrees Or Better. , Supply, Installation, Testing & Commissioning Of Oem Array Frames/ Hanging/ Mounting Arrangement For Suspension Of Upto 8-10 Array Modules Offered Above, Shall Offer Multiple Rigging Points For Achieving Desired Pitch Settings. , Supply , Installation , Testing And Commissioning Of Oem Couling Plate For Array Modules Offered Above. , Supply , Installation , Testing And Commissioning Of A Single 18 Subwoofer. The Louspeaker Shall Meet The Following Performance Criteria: Frequency Range (-10 Db) Of 29Hz - 300Hz. It Should Have An Ground Stack Position Sensitivity Of > = 98Db (1W/1M) Or More Delivering A Ground Position Max. Calculated Spl(Peak) Of >=133 Db; Nominal Impedance Of 4Ohm Or Higher And Continuous Power Handling Of 750W Or More.The Loudspeaker System Shall Be Comprised Of Abaltic Birch Plywood Enclosure With Standard Array Rigging Hardware For Cardioid As Well As Stacked Position. , Supply , Installation , Testing And Commissioning Of Custom Supsension For Subwoofers , Supply, Installation, Testing And Commissioning Of Two-Way 5.25-Inch Or Better High Spl Ip55 Rated Surface Mount Loudspeaker.The Louspeaker Shall Meet The Following Performance Criteria: Frequency Range (-10 Db) Of90hz - 18 Khz Or Better; Nominal Dispersion : 90°H X 80°V Or Better; Power Handling Of 400W Peak Or More; Sensitivity : 86 Db Or Better And The Max Spl: 116Db Peak Or More With Anominal Impedence Of 8 Ohms And Integral Multi-Tap Transformer With Selectable Tap Settings Of 10/20/40/80W@70V & 100V; Standard Wall Mount Brackets Shall Be Included , Supply, Installation, Testing And Commissioning Of Two-Way A Single 8-Inch Or Better High Spl Ip55 Rated Surface Mount Loudspeaker. The Louspeaker Shall Meet The Following Performance Criteria:Frequency Range (-10 Db) Of80hz - 18Khz Or Better; Nominal Dispersion : 90°H X 60°V Or Better; Power Handling Of 800W Peak Or More; Sensitivity : 92Db Or Better; Max Spl : 116Db Peak Or More With A Nominal Impedence Of 8 Ohms And Integral Multi-Tap Transformer With Selectable Tap Settings Of 10/20/40/80W@70V & 100V Standard Wall Mount Brackets Shall Be Included , Supply, Installation, Testing & Comissioning Ofpassive Coaxial Two-Way Point Source Loudspeaker With A Single 8-12 Lf Driver And Compression Driver With 1.7 Or Better Voice Coil. Frequency Range (-10Db) Of 75Hz - 20Khzor Better & Long Term Continuous Power Handling Of 150W Or Better. The Loudspeaker Module Shall Have A Max. Spl (Peak) Of 128 Or Better. It Should Have Horizontal Dispersion Pattern Of 110º Or Better, Vertical Dispersion Of The Loudspeaker Shall Be 60 Degrees Or Better. The Loudspeaker Shall Be Enclosed In A Multi Angle Baltic Birch Plywood Enclosure With Perforated Steel Grille And Monitor Tilt Back Angle Of 35 Degrees. , Sitc Of Digital Audio Conferencing Processor With At Least 12 Mic/Line Inputs & 8 Analog Outputs, 24 Bit A-D And D-A Convertors; Sampling Rate : 48 Khz;Thd : < 0.002 % ; Channel Separation (Crosstalk) : < 108 Db ; Frequency Response 20 Hz - 20 Khz ; Signal-To-Noise Ratio 90 Db ;Dynamic Range > 115 Db; 5 Control Inputs And Outputs; Rs-232 And Ethernet Port For Third Party Control And Monitoring; 32X32 Or More Bidirectional Audio Networking Ports, Shall Include Usb Audio As Standard Feature. Inbuilt Dsp Features Like Conference Room Routers,Input Equalizers, Router, Band Pass Filter, Output Equalizer, Delay, Limiters, Gates , Source Selectors Etc. Shall Support At Least 15 Remote Zone Controllers , Supply, Installation, Testing & Commissioning Of Programmable Audio Dsp Controller With Display And Programmable Encoder Knobs. Multiple Programmable Settings Configurable Over Ethernet. Source Selection And Volume Controls ; Supports Upto 256 Programmable Functions Shall Include Any Accessory To Make The System Functional. , Supply , Installation , Testing And Commissioning Of Digital Amplifier With Max Output Power Of 4X1200w@4-8Ohms, 70V Or 100V Or Bridged Mode Output Power Of 2X3000w@4Ohms. Frequency Response Of 20 Hz - 20 Khz, Snr Of >110 Db(A And Thd+N < 0.1%. With Multiple Channel Metering Ledand Attenuation Controls. Peq, Band Pass, Spkr Eq, Limiter, Delay. Maximum Input Level 20 Dbu. 4 Digital Channels Via Oem, With Euroblock, 8-Pin Connectors For Analog Outputs. Software And Hardware Controlled. Sample Rate 24-Bit, 44.1 Khz – 192 Khz. , Supply , Installation , Testing And Commissioning Ofclass D Configurable Amplifier With Total 2 X 600W Output Power Or Better Across 2 Outputs, 4/8Ohms, 70/100 Voltor Mixed Use Operation; Frequency Response : 20Hz - 20Khz For Lz Mode ;Thd <0.04% At Rated Output , Supply , Installation , Testing And Commissioning Of Class D Configurable Amplifier With Total 2 X 1000W Output Power Or Better Across 2 Outputs, 4/8Ohms, 70/100 Voltor Mixed Use Operation; Frequency Response : 20Hz - 20Khz For Lz Mode ;Thd <0.04% At Rated Output , Supply , Installation , Testing And Commissioning Of Of Class D Configurable Amplifier With Total 4 X 300W / 2 X 600W Output Power Or Better @ 4/8Ohms, 70/100 Voltor Mixed Use Operation; Frequency Response : 20Hz - 20Khz For Lz Mode ;Thd <0.04% At Rated Output Complete With Standard Accessories As Required. , Supply , Installation , Testing And Commissioning Of Wired Handheld Microphone Vocalcomplete With Standard Accessoriesas Per The Tender Specifications Sennheiser E845 Or Equivalent Ofshure/Akg , Supply , Installation , Testing And Commissioning Of Wired Instrumental Microphone Complete With Standard Accessoriesas Per The Tender Specifications Sennheiser E604 Or Equivalent Ofshure/Akg , Supply , Installation , Testing And Commissioning Of Wireless Uhf Handheld Microphone Setcomplete With Standard Accessories As Per The Tender Specifications Sennheiser Ew-100-G4-835 Or Equivalent Of Shure/ Akg , Supply , Installation , Testing And Commissioning Of Wireless Uhflapel/ Head Gear Microphone Set Complete With Standard Accessoriesas Per The Tender Specifications Sennheiser Ew-100-G4-Me2 Or Equivalent Of Shure/ Akg , Supply , Installation , Testing And Commissioning Of Gooseneck Microphone With On/Off Complete With Standard Accessories As Per The Tender Specifications Sennheiser Meg14- 40B+Mat 133S Or Equivalent Ofshure/ Akg , Supply , Installation , Testing And Commissioning Of Hanging Microphone Complete With Standard Accessories As Per The Tender Specifications Akg Chm99 Or Equivalent Of Sennheiser/ Shure , Supply , Installation , Testing And Commissioning Of Boundry Microphonecomplete With Standard Accessories As Per The Tender Specifications Akg Or Equivalent Of Sennheiser/ Shure , Supply , Installation , Testing And Commissioning Of Antenna System Complete With Standard Accessories As Per The Tender Specifications Sennheiser/ Shure / Akg , Supply, Installation, Testing & Commissioning Of Digital Audio Mixer With Oem Interface. , Supply, Installation, Testing & Commissioning Of Io Stage Box Compatible With Digital Audio Mixer. , Supply Of Xlr Floor Box Complete With All Standard Accessories , Supply, Installation, Testing & Commissioning Of Full Range Ip55 Rated Indoor/Outdoor Surface Mounted Music And Pa Loudspeaker. The Loudspeaker Shall Meet The Following Performance Criteria: Usable Frequency Range (-10Db) Of 83Hz To 19Khz; Power Handling Of 64 Watt Peak; Nominaldispersion Of 130°(H) × 130°(V); Sensitivityof 85 Db Spl And Max Spl Of 103 Db Spl Peak; Nominal Impedance Of 16 Ohms And Integral Multi-Tap Transformer With Selectable Tap Settings Of 2/4/8/16W@70V & 100V.The Loudspeaker System Shall Be Comprised Of A 2.25-Inch Woofer; Enclosed In Engineered- Plastics And A Powder-Coated Tamper- Resistant Steel Grille. Ul-1480 Rated And En54-24 Compliant For Life Safety/Va Applications. Shall Be Packed In Pairs. , Supply, Installation, Testing And Commissioning Of Intregrated Stereo Class D Amplifier With Output Of 2 X 50 W @ 4 Ohms, 2 X 25 @ 8 Ohms; Frequency Response Of 40Hz To 20Khz; Thd <0.3%; Shall Include Priority Override And Fire Alarm Interface And Necessary Loudspeaker Eqs. , Supply, Installation, Testing & Commissioning Of Full Range Ip55 Rated Indoor/Outdoor Surface Mounted Music And Pa Loudspeaker. The Loudspeaker Shall Meet The Following Performance Criteria: Usable Frequency Range (-10Db) Of 83Hz To 19Khz; Power Handling Of 64 Watt Peak; Nominaldispersion Of 130°(H) × 130°(V); Sensitivityof 85 Db Spl And Max Spl Of 103 Db Spl Peak; Nominal Impedance Of 16 Ohms And Integral Multi-Tap Transformer With Selectable Tap Settings Of 2/4/8/16W@70V & 100V.The Loudspeaker System Shall Be Comprised Of A 2.25-Inch Woofer; Enclosed In Engineered- Plastics And A Powder-Coated Tamper- Resistant Steel Grille. Ul-1480 Rated And En54-24 Compliant For Life Safety/Va Applications. Shall Be Packed In Pairs. , Supply , Installation , Testing And Commissioning Of Of Class D Configurable Amplifier With Total 2 X 600W Output Power Or Better Across 2 Outputs, 4/8Ohms, 70/100 Voltor Mixed Use Operation; Frequency Response : 20Hz - 20Khz For Lz Mode ;Thd <0.04% At Rated Output , Supply , Installation , Testing And Commissioning Of 100 Volt Line Analog Volume Controllers. , Control , Supply , Installation , Testing And Commissioning Of Control Processor , Supply , Installation , Testing And Commissioning Of 48 Port 1 Gig Poe+ Network Switch , Supply , Installation , Testing And Commissioning Of Ipad / Tablet , Supply , Installation , Testing And Commissioning Of Of Universal Hdmi Adapter Ring With * 1 Apple Certified Adapter Lightning (M) To Hdmi (F) And Lightning (F) To Power Device (Md826am/A) * 1 Apple Certified Adapter Usb C To Hdmi W/Usb A Port (Mj1k2am/A) * 2 Security Clamp To Attach Apple Adapters To Dl-Ar System (Dl- Ap) * 1 Base Security Clamp, Cable And Hardware For Dl-Ar System (Dl-Cl) , Supply, Installation, Testing & Commissioning Of 2 Core 16 Awg/1.5 Sq Mm, Twisted, Unshielded Speaker Cable With Stranded Annealed Bare Copper Conductors, Semi-Rigid Pvc Insulation, Nec Cl3r, Cec Cmg, Rohs Compliant , Supply, Installation, Testing & Commissioning Of 2 Core 14 Awg/2.5 Sq Mm, Twisted, Unshielded Speaker Cable With Stranded Annealed Bare Copper Conductors, Semi-Rigid Pvc Insulation, Nec Cl3r, Cec Cmg,Rohs Compliant , Supply, Installation, Testing & Commissioning Of 2 Core 12 Awg/4 Sq Mm, Twisted, Unshielded Speaker Cable With Stranded Annealed Bare Copper Conductors, Semi-Rigid Pvc Insulation, Nec Cl3r, Cec Cmg, Rohs Compliant , Supply , Installation , Testing And Commissioning Of Of 4 Pair Shielded/Foiled Tia/Eia-568-C Category 6A Cable With 23Awg Or Better Solid Annealed Bare Copper Conductors, High-Density Polyethylene Insulation, Flame Rated Pvc Jacket, Overall Aluminum/Poly Foil Shield With Drain, Nec Cmr, Cec Cmr Ft4, Rohs Compliant. , Supply , Installation , Testing And Commissioning Of Of 2 Core Twisted, Shielded Balanced Audio And Control Cable With 22Awg Or Better 7 Strand Annealed Bare Copper Conductors, Semi-Rigid Pvc Insulation, Riser Rated Pvc Jacket. Ul 444, Ul 13 Cmr Rated , Supply , Installation , Testing And Commissioning Of Of 15 High Speed Hdmi With Ethernet Cable For 3D, 4K, Deep Color Applications And Installations, 18.0Gbps Bandwidth To Support 4K60 4:4:4, Shall Support Arc,And All Hdcp Levels, Hdr Certified By Hdmi Atc,Rohs, Reach, And Taa Compliant, , Supply , Installation , Testing And Commissioning Of De15 Male Plug To De15 Male Plug Video Connectivity 3.5Mm Male Plug To 3.5Mm Male Plug Stereo Audio Video And Sync On 26 Awg High Resolution Coaxial Cables Id Bit Communications And Edid Pin 9 On 22 Awg Cabling Full 15-Pin Vesa Edid And Id/Ddc Compliance Double Shielded Foil And Braid Overall Shield Thumbscrew For Ease Of Installation And Retention 22 Inch Audio Leads For Routing Ease And Convenience Nec Cl2, Csa Type Awm I/Ii A/B Ft4, Rohs Compliant. , Supply , Installation , Testing And Commissioning Ofof 6 High Speed Hdmi With Ethernet Cable For 3D, 4K, Deep Color Applications And Installations, 18.0Gbps Bandwidth To Support 4K60 4:4:4, Shall Support Arc,And All Hdcp Levels, Hdr Certified By Hdmi Atc,Rohs, Reach, And Taa Compliant, , Supply , Installation , Testing And Commissioning Of Various Types Of Cables & Connectrs Packages , Supply , Installation , Testing And Commissioning Of 12 U Rack , Chair , Chair(Comfort) Supply,Installation,Testing & Commissioning Of Auditorium Ecoustic Chairs, Fixed As Per Drawing And Site Condition With Fixed Back And Tip-Up Mechanism And With Clients Approved Colour Selective Fabric (Fabric Shall Be Fire Retardent) As Per Chair Sample Submited. Complete With All Accessories And Fixing With Four Number Anchor Fasteners Of Hilti/Fischer Make. Seating To Be Fixed As Per Layout In Design Drawing. Complete As Per Specifications, Sample Chair Approved As Per Comfort And Fabric Color By The Architect And Client. Size Options : 510 Mm Ctc. M.S. Tubular Structure With U Channel. 3 Mm Foam Laminated Fabric. Moulded Pu Foam 48 To 50 Density. Ppcp With Cup Holder Handle With Cushion Same Colour Fabric. Ppcp Tray Cover For Seat & Back. Black Powder Coating Surface.All Completed Upholstery Units Shall Be Made Fire Reteardent To Local Fire Regulation Standards.Performance Of Flameproof Materials For Clothing &Other Purposes.Pull Load Test To Be Performed. Front Two Rows Shall Be Vip Seats With Cushionsand Bigger Size As Per Architect Specs. , Annual Maintenance Contract For 10 Years From Completion Of Defect Liability Period For Stage Lighting, Audio Video, Drapery & Chairs, Etc.
Contract Date: Mar 24, 2026 Contract Value : 7.19 Crore
Local Bodies No of Bidders 3
Maharashtra View Result →
21.
Defence #9864939 AOC
Tender For special Repair To Bldg No. P-18/01 To 07 (Jcos Md Accn) In Zone-I Area Under Ge Jaipur At Jaipur Mil Stn-- 1 Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed 2 Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses walls or to stone on edge in floors etc built in cement or lime mortar& removing rubbish outside MoD land complete all as specified and directed 3 Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thickness (below or above ground level) complete all as specified and as directed 4 M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses inCM 1:4 on stonemasonry surfaces complete all as specified and directed. 5 M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface of wall finished even and smooth without using extra cement complete all as specified and directed. 6 M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. 7 M&L rendering 15mm thick in CM 1:4 on stone masonry surfaces or on surface other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed. 8 M&L for rendering 15 mm thick in two layers, 1st layer 10 mm thick in CM 1:4 and IInd layer 5 mm thick in CM 1:4 incl mixing of WPC as per manufacturers instruction, on stone masonry surfaces or on surface other than fair faces of brick masonary, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.Note : WPC shall be measured and paid seperately 9 M&L rendering 5 mm thick in CM 1:3 as on concerete surface of ceilings finished even and smooth without using extra cement complete all as specified and directed . 10 M&L Dubbing out average 10 mm thick on irregular face of walls/ceiling floating/ setting coat in CM 1:4 all as specified and as directed 11 M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge. 12 M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge. 13 M&L for preparation of new plastered surfaces of walls and applying two coats of premium exterior emulsion weather proof paint (ready mix) of approve shade and tint using hand roller over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge. 14 M&L for complete removal of existing treatment on walls and applying two coats of premium exterior emulsion weather proof paint (ready mix) of approve shade and tint using hand roller over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge. 15 M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper over 2 mm thick of wall putty complete all as specified and directed. 16 M&L for complete removal of existing treatment on ceiling and applying two coat of oil bound distemper after application of 2 mm putty and one coat of primer complete as specified and directed. 17 M&L for prepartion of keyed pointing to random or polygonal rubble and applying two coats of premium exterior emulsion weather proof paint (ready mix) of approve shade and tint using hand roller over one coat of primer complete all as specified and directed. 18 Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed. 19 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed 20 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 21 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 10 mm thick wall plaster in CM 1:4 complete all as specified and directed 22 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. 23 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 10 mm thick wall plaster in CM 1:4 complete all as specified and directed 24 M&L for coloured Glazed ceramic tiles 300 x 450 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc,. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed . 25 Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid beded and pointed in any mortar complete all as specified and directed . 26 M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15mm thick screed bed in CM 1:4 complete all as specified and directed. 27 M&L 18-20 mm thick kesaria Green marble (table rubbed & polished) in cooking platforms & edges in and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed . 28 M&L for 20mm marble slab (machined polished) as in verticalpartitions, below kitchen cooking plat form and raised platform of kitchen complete all as specified and directed . 29 M & L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floors complete all as specified and directed. 30 M&L 15 mm thick screed bed or bedding layer in cement mortar 1:6for laying floor finishes /tiles /kota stone etc complete all as specified and directed. 31 M&L for machine cut kota stone slab flooring 20-25mm thick of size 550 x 550 mm in floor over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing complete all as specified and directed . 32 M & L Machine cut kota stone slab flooring 20-25mm thick in single piece fixed in cupboard partion including rubbing and polishing complete all as specified and directed. 33 M & L machine cut kota stone slab 20-25mm thick on vertical surface of wall, riser, steps, skirting, dado and pillar etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10 mm thick cement plaster in CM 1:4 including rubbing and polishing complete all as specified and directed 34 M&L for Rounding to edges of stones slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. 35 S & F in repair 18 mm thick WPC board one side white laminate and other side decorative as in kitchen cabinetsfixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick of matching colour on exposed surfaces of board fixed with polymaster adhessiveincluding trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified and directed. 36 S & F in repair 8 mm thick WPCboard one side white laminate and other side undecorative as in back of kitchen cabinets complete all as specified and directed. 37 S & F kitchen plain baskets of stainless steel size 17 x20 x 4 of grade SS-304 complete all as specified & directed.Make : Godrej, Hettich, KAFF 38 S & Fkitchen prerforated cutlery baskets ofstainless steel size 17 x20 x 4 of grade SS-304 complete all as specified & directed.Make : Godrej, Hettich, KAFF 39 S & Fkitchen cup & saucer baskets of stainless steel size 17 x20 x 4of grade SS-304complete all as specified & directed.Make : Godrej, Hettich, KAFF 40 S & Fkitchen plate baskets of stainless steel size 17 x20 x 6 of grade SS-304 complete all as specified & directed.Make : Godrej, Hettich, KAFF 41 S & Fkitchen grain baskets of stainless steel size 17 x20 x10 of grade SS-304 complete all as specified & directed.Make : Godrej, Hettich, KAFF 42 S & F stainless steel basket guide channels suitable for running basket as mentioned in items above of grade SS-304 complete all as specified & directed.Make : Godrej, Hindware, Lifetime, Hettich 43 S & F auto close hinges, stainless steel of grade SS-304, bright finish fixed complete all as specified.Make : Godrej, Hindware, Lifetime or equivalent 44 S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed.Make : Godrej, Hindware, Lifetime or equivalent 45 S&F in repair sinks made of stainless steel 18 guage of grade SS-304, kitchen or labortory with plugs, washers and wastes pipe and coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to ipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 46 Taking up or down 15mm steel tubing and connections including cleaning and refixing old steel tubing and connections in new or old positions (walls, ceiling and floor etc) incl new fittings complete all as specified and directed. 47 Taking up or down 20mm steel tubing and connections including cleaning and refixing old steel tubing and connections in new or old positions (walls, ceiling and floor etc)incl new fittings complete all as specified and directed. 48 S&F in repair 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old complete all as specified and directed. 49 S&F in repair 20 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or laid in floor including taking down old complete all as specified and directed. 50 S&F in repairs 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with cruth or butter fly handle, long body, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 51 Supply only pillar taps 15mm bore swan neck cast coper alloy CPfancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. 52 S&F in repair brass CP towel rail 20mm dia, D type 60 cm long between flanges complete all as specified and directed. 53 S&F in repair double soap dish, CP brass R typefixed to plugs with chromium plated brass screws complete all as specified and directed.. 54 S&F in repair brass chromium plated shower rose 125mm x 125 mmsize with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. 55 S&F in repair 15mm bore stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed. 56 S&F in repair PVC Connections 15mm size, 450mm long with PTMT nuts complete all as specified and as directed. 57 S&F in repair 20mm bore gun metal gate valve, screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed. 58 S & F in repair 15mm bore wall mixer, brass, chromium plated, fancy type, 3-in-1 for mixing hot & cold water, with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipeand plugging complete all as specified and directed. 59 S & F in repair 250 mm corner glass shelf with brass brackets incl chromium plated brass screws complete all as specified & directed. 60 S & F in repair vitreous china squatting pan, Orissa pattern, size 580 mm X 440 mm white with ‘P’ or ‘S trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed. 61 S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. incl trap set in cement concrete complete all as specified and directed. 62 S&F in repairs PVC valveless, syphonic action type flushing cistern, low level, 10 ltr capacity, white, with intel, ball valve, float and handle including brakects, 32 mm dia polyethylene of low or high density or PVC flushing pipe and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified & as directed. 63 S&F as in repair 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 64 S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. 65 S&F in repairs vitreous china wash hand basin white flat back of size 550 x 400 mm excluding taps, waste pipe, chain & plug and porcelene stopper but including brackets /fastners, 32mm dia brass chromium plated waste coupling with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, cutting for and pinning in ends of brackets, including fixing of pillar tap complete all as specified and directed. 66 S& F 32 mm bore PVC waste pipe 75 cm long of approved make with 32mm dia connector suitable for WHB/sink complete all as specified and directed. 67 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. 68 M&L for brick work with sub-class B bricks (old size), straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed 69 M&L for brickwork with subclass ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed. 70 M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. 71 Dismantling of 100mm bore cast iron soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or fromtrenches, if required complete all as specified and directed. Note : The length shall be measured along the centre line including fittings and accessories). 72 Dismantling of 75mm bore cast iron soil / waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or fromtrenches, if required complete all as specified and directed. Note : The length shall be measured along the centre line including fittings and accessories). 73 S&F 110 mm UPVC(SWR) ventilation and rain water pipes (type A conforming to IS-13592) single socketed, in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed. 74 S&F 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed. 75 S&F 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified & directed. 76 S&F 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified & directed. 77 S&F 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed. 78 S&F 110 mm dia UPVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified and directed. 79 S&F 110 mm dia UPVC (SWR) bends any radius with access door complete all as specified and directed. 80 S&F 75mm dia UPVC (SWR) junction single (Single Tee with access door)equal or unequal complete all as specified and directed. 81 S&F 75mm dia UPVC (SWR)bends any radius complete all as specified and directed. 82 S&F 75 mm UPVC (SWR) vent cowl complete all as specified and directed. 83 S&F 110 mm UPVC (SWR) vent cowl complete all as specified and directed. 84 S&F in repair PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement complete all as specified and directed. 85 S& F in repair PVC (SWR) gully traps of size 125/110 setting and jointing with solvent cement complete all as specified and directed. 86 S & F in repair MS CP Grating doom 100 mm dia with or without waste hole complete all as specified and directed. 87 S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl 20mm dia ball valve high pressure of PTMT with polythene flynut and aluminium rodincl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. 88 Taking down shutters of any description exceeding 1 sqm and n.exc 2 sqm each and refixing after easying in the same opening complete as directed and specified. 89 Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. 90 Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. 91 Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. 92 S&F 100x75mm, rebated, karoli stone chowkats with exposed faces close picked dressed, including 4 bolt holes `per upright, erected in position and bedded and pointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified & directed. 93 S&F 125x75mm, rebated, karoli stone chowkats with exposed faces close picked dressed, including 4 bolt holes `per upright, erected in position and bedded and pointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified & directed. 94 S & F for Solid wood grain printed PVC sheetdoor frame of size 50mm x 95mm made by joining 3nos. Heat bent PVC Sheet `C Channel of 5mm thickness of sizes 35mm x 30mm x 25mm & 40mm x 35mm x40mm & 25mm x 30mm x 35mm using solvent cement. The two side `C Channel shall be reinforced with M.S. tube of size 19mm x 19mm. All the three `C channel Shall be fixed to flat base of 5mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and joined by inserting 4nos. 150mm long brackets of 15x15mm M.S. Square tube inside the 19mm x 19mm square tubes & remain each of then with four screws as indicated in the drawing. 95 S&F for 35 mm thick Factory made solid EPS core PVC Moulded Door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design, consisting of frame made out ofMS tube 20 mm x 40 mm. The core panel shall consist of 25 mm thick high density EPS routed with design, sandwitched in between front side moulded prelam 2 mm thick Moulded PVC sheet on one face and 2 mm PVC sheet on other side. The shutter on all edges to be sealed with lipping of 10 mm (5mm x 2) thick x 25 mm wide PVC sheet on other side & 60 mmwide PVC sheet for lock lock rail side . the lipping shall be bonded to the 2 mm moulded / plain PVC sheet with solvant cement asas specified and shown in SSRand Particular specification & as directed. Note :- .(i) The PVC doors shall be fixed as per manufacturers instructionsand as directed 96 S & F 35mm thick flush shutters solid core construction with block board and plywood face panels,fixedwith approved adhessive incl lipping all round the edges of door as per manufacturers instructionscomplete all as specified and directed. 97 M&L for decorative laminate type-I, 0.9 mm thick, colour and pattern as approved fixed as in door shutters complete all as specified and directed. 98 S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash barsany numbers ,fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :-Glass/gauge shall be measured and paid for separately 99 S & F 35mm thick factory made partly gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Supply of glass/gauge shall be measured and paid for separately 100 S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window or door complete all as specified and as directed. 101 S &F Framed work such as door frame, grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165complete all as specified and directed. 102 S & F SS(SS-304) butt hinges 150 mm size heavy weight and fixed complete fixed in stone choukats all as specified and directed. 103 S & F MS butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed. 104 S & F 250 mm long SS sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate complete all as specified and directed. 105 S & F 150mm size SS (grade-304) handles, cast moulded type fixed with screws complete all as specified and directed. 106 S & F SS (grade-304) barrel tower bolts not less than 12 mm dia of extruded section, 200mm long complete all as specified and directed. 107 S & F 75 mm long door stopper of stainless steel body with two number rubber shoes complete all as specified and directed. 108 S & F MS Helical door spring 150mm long including roller and roller plate complete fixed to angle iron chowkats as directed and specified. 109 S & F in repair pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3.15 mm thick and 100 mm long steel hinges, godrej patern locking arrangement incl 12 mm dia vertical rod incl spray painting in factory in wood finish pattern complete all as specified and directed 110 S&F in repair 25 mm dia SS (grade 304) drapery/curtain rod medium weight incl taking down old one with finials, brackets etc complete all as specified and directed 111 S&F SS (grade-304)brackets/ end brackets for holding 25mm dia drapery rod complete all as specified and as directed. 112 S&F SS (grade-304) Finials, fancy type of approved make and pattern suitable for 25mm drapery rod complete all as specified and directed. 113 M&L for prearation of new or previously untreated steel and iron surface of any description, over 10cm in width and girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide (zinc chrome) primer complete all as specified and directed. 114 M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 115 M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. 116 M&L providing cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) in lintels up to 1.5m clear span, cills, bed plates,coping, kerbs water trough & the like including weathering, slightly rounded or chamfered angles & throating complete as specified and directed 117 Demolition existing water proofing treatment includingPCC in roof covering/padding kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type upto mother slab of roof complete as specified and directed.incl removal all rubbish material outside of MoD Land 118 M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying average 40mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate)finished even & fair to cover negative slope complete as specified and directed 119 M&L screed plaster 10mm thick in cement mortar (1:4) on concrete surfaces of roof to receive water proofing treatment and finished the surface even and fair incl mixing of WPC as per manufacturers instruction complete all as specified and directed.Note:- water proofing compound paid seperately as supply only 120 Supply only integral water proofing compund ISI marked complete all as specified and directed. 121 Supply and laying water-based, single component UV resistant, elastomeric PU liquid water proofing coating, having SRI >109 with an elongation of >400% and tensile strength of 1.4 MPa as per ASTM D 412, 80 % Solid Content, shore A Hardness of min. 50 as per ASTM D 2240 using roller in four layer (Primer coat,First coat, Fibre reinforce mesh & final coat) providing 1.2 mm DFT as per manufacturers specifications and instruction complete all as specified and directed. Application:- (a) Surface to be treated shall be free from loose particle etc then apply first coat of liquid water proofing as a primer on the surface with diluting as per manufacture instruction and allow the surface to dry for min 10-12 Hr time period. (b) Apply Second coat of Liquid water proofing without dilution on the primed surface and allow time to dry the surface for min 10-12 hr. (c) Apply Fibre reinforce mesh as per manufacturers instruction (iii) Applying third coat of liquid water proofing without dilution over the fibre rei coat and Allow minimum 48 hours before subjecting the painted surface to service.Note : (i) Work shall be carried out through authorized applicator of manufacturers only(ii) Material shall be used as per technical data / instruction of manufacturer after written approval of garrison engineer before execution at site and contractor shall submit guarantee of roof treatment work for TEN years Make:- Asian Paint : PU Aqua, M/s STP LTD-Shaliurethane BTD, Berger : Elastoseal BTD, Fosroc : Nito proof as approved by GE 122 M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length.Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. 123 M&L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 124 S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less,firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. 125 S & F in repair stainless steel kitchen plate rack of approved quality of overall minimum size 750 x 600 x 250mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws complete all as specified and directed. 126 M&L Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 127 ,---ditto--- all as per item No. 126 above but TMT bar 10 mm dia & over complete all as specified and directed . 128 M & L for providing precast cement concrete type B1 1:2:4 (using 20mm graded aggregate) in landing, cover slab (for man hole etc) chullah hood, chajjas, water troughs, mangers, shelves and similar articles with plain faces incl form work set in cement mortar 1:6 complete all as specified and directed. 129 Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description andin any positionnot otherwisespecifically provided for complete all as specified and directed. 130 M&L form work to chullah hoods, chajjas, troughs and similar items including edges finish with rough finish surface complete all as specified and directed. 131 M&L for RCC (nominal mix) 1:1.5:3 Type A1(using 20 mm graded stone aggregate ) as in Chhaja, roof projections etc.complete all as specified & directed.Note :- Reinforcement shall be measured and paid for separately. 132 Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness complete all as specified and directed. 133 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. 134 S & F steel work in tubular trusses incl special shaped washer etc, complete using ERW or induction butt welded tubes conforiming to IS 1161-1979 graded St-240 complete all as specified and as directed. 135 S&F Mild Steel work in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E-250) qulaity A including fabrication, erraction and fixing complete all as specified and directed. 136 S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers complete all as specified and directed. 137 M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed. 138 M & L rubber moulded machine pressed precast concrete interlocking paver block, coloured, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with coloured cement and pigment laid over and incl 25mm thick sand cushion layer complete all as specified and as directed.Note : Sand for cushioning shall be included under quoted rates. 139 M&L for precast cement concrete 1:3:6, type C1 (using 20mm graded stone aggregate) solid blocks, exc 10 cm in width as in kerb stones and setting in cement mortar 1:4 incl necessary earthwork complete all as specified and as directed. 140 M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators, Partition section with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 141 S&F Powder coated anodised aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge 142 S&F Galvanised mild steel cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples in window or door complete all as specified and as directed. 143 S &F 4.8mm thick tinted glass ordinary quality and fixed in aluminium beads in sqaures not exc 0.5 sqm in each pane complete all as specified and directed. 144 S&F powder coated (thickness not less than 50 micron) aluminum grill 6-8 mm thick of approved design aperture size 50mmx50mm of standard sections including F type aluminium snap beading screw complete fitted to aluminium frame section complete all as specified and directed. 145 Excavation in trenches not exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shaft , wells, cesspits, manholes, pier holes, etc n. exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed. 146 ,---ditto--- all as per item No. 145 above but depth exc 1.5m but not exc 3m complete all as specified and directed. 147 Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/ loose soil complete all as specified and directed. 148 Removing excavated material n.exc 50m & depositing where directed at a level n.exc 1.50m above the starting point in soil complete all as specified and directed. 149 Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150mm dia set in cement mortar complete all as specified and directed. 150 Supply & laying DWC pipe (Double wall corrugated ) of class SN-4, IS-16098 (Part –II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler, bend, Tee, reducer etc complete all as specified & directed .Note :Earth work shall be measured and paid seperately 151 Taking down carefully surface aluminum /copperpoint wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed. 152 Taking down MCB distribution board with incoming and outgoing controls any make and capacity after disconnecting complete all as specified and directed. 153 Taking down light fittings of any type any make any capacity complete all as specified and directed. 154 Taking down carefully sub main wiring with PVC casing capping / PVC surface conduit and making good disturbed surfaces complete all as specified and directed. 155 M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable, single core, 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade of size not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories concealed in wall/ roof/floor incl modular sunken GI metal boxes not less than 1.0mm thick moulding in wall and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc as required for one light /fan point controlled by one, one way switch 6 Amp complete all as specified and directed. 156 ,---ditto--- all as per item No. 155 above but for one bell point controlled by one bell push complete all as specified and directed. 157 ,---ditto--- all as per item No. 155 above but for one light point controlled by two, two way switch complete all as specified and directed. 158 ,---ditto--- all as per item No. 155 above but for one 3 pin 5 Amp socket outlet controlled by one switch on same board complete all as specified and directed. 159 ,---ditto--- all as per item No. 155 above but for one 3 pin 5 Amp socket outlet controlled by one switch on indepdendent board complete all as specified and directed. 160 M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable single core, 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade of size not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories concealed in wall/ roof/floor incl modular sunken GI metal boxes not less than 1.0mm thick moulding in wall and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc as required for one 3 pin, 15amp socket outlet on independent board complete all as specified and directed. 161 S&F modular switch,6 Amps, one way, 240 volts, 1 module complete all as specified and directed. 162 S&F modular switch, 6 Amp, two way, 1 module AC 240 volts complete all as specified and directed. 163 S&F modular switch 16 Amps, one way, 240 volts, 1 module complete all as specified and directed. 164 S&F modular bell push, 6 Amp, 1 module complete all as specified and directed. 165 S&F modular socket, 6 Amps, 2/3 pin combined, 2 module AC 240 volts complete all as specified and directed. 166 S&F modular socket, 6/16 Amps, 2/3pin combined, 2 module AC 240 volts complete all as specified and directed. 167 S&F modular hum free electronic step fan regulator 120-280 volts of 120 watts capacity (socket type) including connecting up complete all as specified and directed. 168 S&F ceiling rose PVC polycarbonate isolated body, 3 terminals 230 Volt complete all as specified and directed. 169 S&F ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with BLDC fan motor, Min air delivery 210 CFM with service value 6.00 BEE, incl blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required complete all as specified and directed. 170 M&L for sub main wiring with four run of 10 Sqmm single core, PVC insulated, unsheathed, FRLSH multistranded copper conductor cable alongwith one run of 10 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non-metallic PVC conduit of 20mm dia, ISI marked, ivory colour with fitting / fixing accessories of suitable size as required including making connection as required complete all as specified and directed. NOTE - Four run of 10 sq.mm phase and neutral wire, One run of 10 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length. 171 M&L for sub main wiring with two run of 6 Sqmm single core, PVC insulated, unsheathed, FRLSH multistranded copper conductor cable alongwith one run of 6 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non-metallic PVC conduit of 20mm dia, ISI marked, ivory colour with fitting / fixing accessories of suitable size as required including making connection as required complete all as specified and directed. NOTE - Two run of 6 sq.mm phase and neutral wire, One run of 6 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length. 172 S&F MCBs Distribution board SPN, 8 ways, powder coated CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 240V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs incl taking down old U/S DB complete all as specified and directed.Note : MCBs and MCB DB shall be of the same make. 173 S&F MCBs of B curve, single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked, 240Voltsincluding required wiring connections with copper lugs of suitable size provided in MCB DBs incl connection testing and commissioning complete all as specified and directed. 174 S&F MCBs of B curve, Double pole 10 to 32 Amps having breaking capacity 10 KA, ISI marked, 240Voltsincluding required wiring connections with copper lugs of suitable size provided in MCB DBs incl connection testing and commissioning complete all as specified and directed. 175 S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 105 lumen per watt and total power consumption not more than 20 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed.Make - Philips Cat part BN308C LED20S-6500 L120 PSU WH, Crompton Cat part CIS-305-40-57-SL-DP-NWH, Havells Cat no STOUTPLUS600BS20WLED840SPCWH. 176 S&F LED batten (0.6m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 900 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 10 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. 177 S&F LED bulk head light fitting 9 watt IP 66 & IK 09 with with pressure die cast aluminium housing & polycarbonate diffuser duly prewired connection with 0.75sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified & directed. 178 M & L Sand cushioning to under ground cable with screened and washed sand (non cohessive), 8 cm before laying cable and 15cm after laying and punned to 18cm after laying of cable complete all as specified and directed by Engineer-in-Charge.Note : Punned thickness shall be considered for payment purpose. 179 M&L for factory made unreinforced pre-cast concrete cable protection cover LV class type-I with size 250mm X 150mm X 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning complete all as specified and directed. 180 S & F in repair 50 mm bore GI tubing light grade with all fittings, fixed to wall/ pole with suitable size MS clamp, nut, bolt, washer etc or laid under road crossing etc as reqd for protection of cable incl painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.Note : Cost of MS clamp, nut bolt, washer and GI fittings etc shall be inclusive in the quoted rates. 181 Dismantling and taking out UG cable any size and fixed in any position and removal from site complete all as specified and directed. 182 Supply, laying, jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC sheathed, galvanised steel strips or wire armoured, heavy duty electric cable with multi stranded aluminium conductor, 1100 volts grade cross sectional area 16sqmm, 2core confirming to IS:7098 (part-I), laid in trenches, ducts, pipes or fixed on poles or walls including all necessary clamps, nut, bolt, washers, saddle etc complete all as specfied and directed.Note : The cost of AI thimbles / lugs and cable gland etc is included in quoted raes. 183 M&L for earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6.0mm buried directly in ground, vertically to depth not less than 2.25mtr below normal ground level with top edge of the earth plate at depth not less than 1.5 metre below ground level surrounded from all sides with alternate layers of charcoal and common salt and connected to GI lead wire 4.0mm dia by means of GI bolts, nuts washers & check nuts electrode connected to main switch board or main control board or on poles or on transformer and GI pipe medium grade 20mm bore for watering, 40mm bore GI pipe medium grade for protection of GI wire upto test point including providing funnel and wire mesh GI frame and 10cm thick suitably reinforced RCC pit cover, PCC chamber pit with PCC (1:3:6) type C2 using 40mm graded stone aggregates complete including excavation and earth work in any type of strata, disposal of surplus soil to a distance not exceeding 50 mtr, all as specified ans shown in Electrical plate No. 3 of SSR Part-1, PCC pit shall be provided at least 50 cm away from the earth pit and not just on earth pit including testing on completion complete.(Note - GI lead wire size 4.0mm upto 7.5 m included in the item). 184 S&F in replacement fresh air fan of sweep 200 mm, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, copper winding incl making connections complete all as specified and directed. Note : Old U/S plastic fresh air fan shall be deposited to MES store yard 185 Taking down carefully exhaust fan 300mm sweep, metal body with louvers, fan motor and accessories complete and including minor repair and refixing the same after repairing at new or old location complete all as specified and directed. 186 Taking down carefully storage type water heater (geyser) 25 ltr capacity, any make, from clamp/bolts including disconnecting water and electric connection and re fixing the same and connecting up after cleaning of geyser and minor repair and replacement of damaged PVC connection, plug top etc complete all as specified and directed. 187 S & F in repair 20amp, single pole and neutral socket outlet, with 2 pole and earth, metal enclosed plug top in powder coated CRCA steel sheet enclosure recess mounted with chained matel cover for socket out let with and incl one single pole B curve MCB 20 Amps complete all as specified and directed. 188 M&L for clamp and back plates fabricated from steel sections conforming to Gde Fe 410-O or Fe 310-O including nuts, bolts, washer, drilling holes for bolts in any shape or size for fixing ceiling fan complete all as specified and directed. 189 M&L for taking out ceiling fan 1200/1400mm sweep 50Hz AC 230 volts, dismantling fan blade and refixing the same including minor repair and replacement of fan blade, down rod, nut, bolt and washer including 0.5sqmm thre core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling as required and writing MES No. on fan body complete all as specified and directed.Note :Material reqd for repairing shall be paid seperately as supply only 190 M&L for rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete all as specified and directed. 191 Supply only ball bearing no- 6201 to 6204 for ceiling / exhaust fan etc. of any size and make as required with alignment of shaft and testing complete all as specified and directed. 192 Supply only AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete all as specified and directed. 193 Supply only shaft of approved quality for ceiling fan / exhaust fan any make any type & size as required complete all as specified and directed. 194 M&L for painting of ceiling fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc complete all as specified and directed. 195 Supply only rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required complete all as specified and directed. 196 Supply only PVC canopy suitable for ceiling fan of any size and make as required complete all as specified and directed. 197 Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule A/BOQ
Contract Date: Mar 19, 2026 Contract Value : 41.52 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
22.
Defence #9843690 AOC
Tender For Completion Of Incomplete Work Of Provision Of Gymnasiums (Cl Ii) At Grrc, Lansdowne.; 1 M&L for 100 mm thick PCC (1:4:8) type D2, (Using 40 mm graded stone agg) as in sub base/sub base of floorcomplete all as specified and directed. 2 M&L for moorum / red bajri filling in, floor or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. 3 M&L for modular brick work with FLYASH bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. 4 M&L for brick work with SUB CLASS B old sizebricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. 5 M&L for brick work with SUB CLASS B old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. 6 M&L for 20 mm thick granite slab as approved by the GE (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. 7 M&L for 10 mm thick plastering on fair faces of bricksurface in CM (1:4) surface finished even and fair complete all as specified and directed. 8 M&L for 20 mm thick granite slab as approved by the GE (table rubbed and polished) inwall lining (Veneering to wall) in12 mm thickin CM (1:3) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 9 M&L for 10 mm thick plastering on fair faces of bricksurface in CM (1:6) surface finished even and fair complete all as specified and directed. 10 M&L for preparation of new plastered surfaces of walland chalk whitening and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specificationover a coat of primer of approved make complete all as specified. 11 M&L Providing Granite slab edge moulding to 20mm thick stone of counters vanities ,cooking plateform,step etc.including machine polishing to edge to give high gloss finish etc. complete all as specified. 12 Returning, filling in any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed. 13 M&L for PCC (1:4:8) Type D2 (Using 40 mm gradedstone aggre-gate) 200 mm thickas in floor/paving complete all as specified and directed. 14 M & L 20 to 25mm thick Kota Stone (Mirror Polished) with marble strip all as specified and as directed over 20mm thick screed bed in CM 1:6 complete all as specified and directed. 15 M & L 20 to 25 mm thick Kota Stone (Mirror Polished) 100 mmwidth as in skirting over 10 mm thick cement mortar 1:4complete all as specified and directed. 16 S & F Rubber tile for floor thickness not less than 25 mm thick(tough rubber flooring made upto 40% black recycled rubber & 20% colour EPDM(Ethlyene propylene-Diene-monomer rubber granules & adhesive with V-groove,interlocking & paper cut as directed by EIC plane rubber matting shall have a checker plat surface pattern & a flat revers side. The non directional checker plat patterns gives this matting a non slip surface that is still easy to mop/clean of desired colour.Adhesive -SR 505 or SR 998 as per manufacturers instruction or styrene butadiene copolymer (SBX) latex synthetic rubber adhesive. complete all as specified and as directed. 17 S & F Rubber tile for wall cladding not less than 15 mm thick(tough rubber made upto 40% black recycled rubber & 20% colour EPDM(Ethlyene propylene-Diene-monomer rubber granules & adhesive with V-groove,interlocking & paper cut as directed by EIC plane rubber matting shall have a checker plat surface pattern & a flat revers side. The non directional checker plat patterns gives this matting a non slip surface that is still easy to mop/clean of desired colour.Adhesive -SR 505 or SR 998 as per manufacturers instruction or styrene butadiene copolymer (SBX) latex synthetic rubber adhesive. complete all as specified and as directed. 18 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed inany mortar and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 19 M&L for granitetiles 20mm thick machine cut as approved by GE, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 20 mm thick screed bed (1:6) complete all as specified and as directed. 20 Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed. 21 M&L for 20mm thick Granitetiles machine cut as approved by GE, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10 mm thich rendering (1:4) complete 22 M&L for hard core of broken boulders/stone of gauge n exc. 63 mm, deposited, spreading, leveling watering and well ramming to true surface in layers not exceeding 15 cm thick each layer complete all as specified and directed. 23 M&L for PCC (1:3:6) type C-1, using 20 mm graded stone aggregate as in surface channel and drainetc complete all as specified and directed. 24 M&L for extra for forming fair finished drain, or channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed. 25 Mirror polishing on marble/ granite/Kota stone/ stone work where everrequired to give high gloss finishcomplete all as specified and directed. 26 Excavating in trenches nexc 1.5 m width and nexc 1.5 m in depth for foundation or for shafts, well cesspits, manholes etc / for laying of cable/ pipe etc nexc 10 sqm on plan and nexc 1.5 m in depth and getting out in soft/disintegrated rock complete all as specified and directed. 27 M&L for PCC (1:4:8 Type D2 (using 40 mm graded stone aggre-gate) as in foundations, filling and mass-concrete complete all as specified and directed. 28 M&L for 15mm thick plastering on brick or concrete surfaces in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and directed. 29 M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 30 M&L for 100 mm thick PCC (1:2:4) type B2, (using 40 mm graded stone agg) as in sub base of floor complete all as specified and directed. 31 M&L for preparation of newly plastered surface of external wall all as prescribed by manufacturer of paint and applying two coats of exterior anti fungal acrylic emulsion paint of make as approved by GEover one coat of primer complete all as directed. 32 M&L forstainlesssteel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessarystainless steel nuts and bolts complete, includingfixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor orthe side of waist slab with suitable arrangement complete all as specified and directed. 33 M&L Plain, Aluminiumsheeting,Alloy 31000 H4in ridges, hips, valleygutter, drip and straightflashing (length andgirth as fixed) with powder coating of any colour (thickness of powder coating not less than 50 micron complete all as specified and directed. 34 M&L for pre-formed filler board 25 mm thick for crumple joints complete all as specified and directed. 35 M&L for mild steel screw bolts (machine made) dia of neck length 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, nexc 5cm long complete all as specified and directed. 36 M&L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application over 15 mm thick cement screedbed (1:4) complete all as specified and directed. 37 S& F 1.25 mm Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;gear operated type with bevel gear box and crank handle erected in position as indicated including MS Spring for rolling shutter, size of spring 300mm long inner dia not less than 65mm and MS wire 6mm dia complete all as specified and as directed. 38 Supply only Ball bearing for rolling shutters complete all as specified and directed. 39 M&L for twocoats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed. 40 M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or PCC (1:2:4) type B1 to match with existing surfaceof following superficial area complete all as specified and as directed :- 41 Superficial area exc 150 sqcm but not exc 400 sqcm 42 M&L bands, straps, supports or stays for rainwater (stack clamp), ventilating pipes, including bolts, if required, hooks (stays), heavy for large gates, hooks and pintle hinges large hasps and staples, hand made sliding bolts, clamps, hold fasts, wall ties, hooksforhanging fans plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts two way and three ways straps, plate washers and similar articles conforming to Fe-290(Gde-E-165) complete all as specified and directed. 43 S&F Powder Coated ofcolour as approved by GE/AGE(I)(minimum thickness of powder coating 50 micron), aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 44 S&F Powder coated ofcolour as approved by GE/AGE(I) (minimum thickness of powder coating 50 micron), aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminium snap beading, screws etc. complete all as specified and directed. 45 S&F Powder coated ofcolour as approved by GE/AGE(I) (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. 46 S&F Powder coated of colour as approved by GE/AGE(I) (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. 47 S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden/ PVC/ aluminium beading, in square n. exc 0.5 sqm in each pane complete all as specified and as directed. 48 S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden or aluminium or PVC beads in square in each pane of following size complete all as specified and as directed :- 49 Exc 0.5 sqm in each pane 50 S&F 2nd class hardwood ( sal ) Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 51 S&F 35mm thick factory made plain framed, panelled door shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified. 52 S&F extruded aluminium alloy handles, fabricated type, anodised (ISI marked) of following size complete all as directed and specified:- 53 150 mm long 54 S&F anodised aluminium barrel tower bolts (ISI marked) of extruded section of following size complete all as directed and specified:- 55 150 mm long 56 S&F anodised aluminium sliding door bolt (ISI marked) with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of following size complete all as specified and directed:- 57 300mm long 58 S&F floor doorstopper (ISI Marked) of aluminium alloy body andtongue anodised, with hard drawn steel spring, fixed in floor of following size complete all as specified and directed :- 59 140mm long (overall length of cover plate) 60 S&F MS butt hinge, medium weight, cold rolled and fixed of following size complete all as specified and directed:- 61 100 mm long 62 M&L for twocoats of synthetic enamel paint over a coat of pink primer including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed. 63 S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete as all as specified and directed. 64 S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed. 65 S&F 125 mm long anodised aluminium barrel tower bolts (ISI marked) of extruded sectioncomplete all as directed and specified 66 S&F vitreous china urinal half stall type urinal white complete including providing and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with & including 60 mm brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe and urinal spreader complete all as specified and directed. 67 S&F 5mm thick bevelled edge best quality looking mirror of size 600x450 mm with 30mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 6mm thick AC bldg board, complete all as specified and directed. 68 S & Fvitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified and as directed . 69 S&FPVC valveless, syphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed. 70 S&F vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., completeall as specified and directed. 71 S&Ftoilet paper holder of brass, chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. 72 S&F Liquid soap container of PTMT fixed withand including Chromium plated brassscrews and wooden/plastic cleats. (Minimum weight 105gms) completeall as specified and directed. 73 S&F towel rail 600mm long of PTMT fixed with and including CP brass screws and wooden cleats having min weight 190 gms complete all as specified and directed. 74 S&F rotational moulded polyethylene water storage tank, white in colour triple layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia Ball valves highpressure of PTMTwithepoxy coatedAluminiumrod&highdensity plastic ballscrewed for iron pipeand fixed.(Minimumweight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms),20 mm GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of following capacity of tank completeall as specified and as directed:- 75 Capacity 1000 Ltrs 76 S&Fof hat pegs, aluminium solid body, 125mm to 175 mm complete all as specified and directed. 77 Returning, filling in ,soft/ disintegrated rock including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed. 78 Removal of excavated materialto a distance nexc. 50 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 79 Removal of surplus soft/disintegrated rocks to a distance nexc. 50 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 80 Removal of surplus soil to a distance exc. 250 Mtr nexc. 500 Mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 81 Spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required complete all as spd 82 M&L concrete bed to drain pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for 150 mmbore sewer pipe line complete all as specified and directed. 83 M&L for 15mm thick plastering on fair faces of brick wall in two layers, Ist layer 10mm thick CM (1:6), and IInd layer 5mm thick CM (1:4), surface finished even and fair mixed withWPC (liquid type) as per manufacturer instruction complete all as specified and directed.Note :- WPC (Liquid type) shall be measured and paid separately as supply only. 84 Supply only WPC integral water proofing compound (Liquid type) complete all as specified and directed. 85 M&L for precast RCC (1:2:4) type B1, (using 20mm graded stone aggregates) as in cover slab (for manholes) and set in CM (1:4) including necessary fair finish formwork complete all as specified and directed. 86 M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 87 S&F cast iron (Spun pipe) soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor for following bore of pipes complete all as specified and directed:- 88 100mm bore (spun pipe) 89 M & L for PCC type C2 (1:3:6) (using 40mm graded stone agg ) as in surface channel or drain or benching in manhole complete incl. necessary form work all as specified and directed. 90 S& F powder coated mild steel Personel locker unit of size 1140x450x380mm of size and thickness of 0.8mm including lebel holder,HDPE plastic handle, and 04 Nos levelling screws/stands with complete all as specified and directed. 91 S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. 92 S & F Brass knobs 35-40mm dia complete specified and directed. 93 M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves complete all as specified and directed. 94 M&L Formwork to edges of concreteflats, treads, breaks in floors,window cills, concrete rail ings, openings in concretewalls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similarwork exc 10cm but n exc 20cm widecomplete all as specified and directed. 95 M&L for formworkfor rough finish to soffits of suspended slabs such as roof slabs, floor slabs, landing slab and similar work, not exceeding 200mm thick complete all as specified and directed. 96 M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed. 97 M&L for 19 mm thick prelaminated particle board, interior grade, ISI marked, pre laminated one side with decorative choice lamination and other side balancing white laminationsuitable fixed with screws to timber frame workcomplete all as specified and as directed. 98 M&L for 10 mm thick plastering on other than fair faces of bricksurface in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and directed. 99 S&F continuous (piano) brass hinges, width of flaps (when open) 30mm complete all as specified and directed. 100 S&F 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screwscomplete all as specified and directed. . 101 M&L for preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying one coat of oil emulsion distemper complete all as specified and as directed. 102 M&L for preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying one coat of plastic emulsion distemper complete all as specified and as directed. 103 M&L for preparing newly plastered surfaces of wall and applying/ finishing walls with Acrylic Smooth exterior paint of required shade with Twocoat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturer instruction complete all as specified and directed. 104 S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 105 S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and as directed. 106 S & F Aluminium section frame work in ACP Cladding complete all as specified and as directed 107 S&F rolled mild steel section for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W(Gde-E-250) quality-Acomplete all as specified and as directed.Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete. 108 S & F Plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. 109 Erection Fixing only (Retrieved Material will be reused) of roof trusses (framed), trussed, purlins, and fastenings and heavy framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Note : Erection fixing with old section and making the surface smooth as per its original 110 Erection Fixing only (Retrieved Material will be reused) Plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. Note : Erection fixing with old section and making the surface smooth as per its original 111 M & L preperation of old steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified 112 S & Fin Repair of20-22mm dia of neck MS Screw bolts(Machine made ) with hexagonal or square heads at one end and screwed at other end or both end, and screwed end to be fitted with washer and one hexagonal or square exc 30cm long etc complete all as specified anddirected. 113 M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed. 114 M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in Chajjas complete all as specified and directed. 115 M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in floor/ roof beam, cantilevers, lintel over 1.5m span complete all as specified and directed. 116 M&L for formwork for rough finish to sides of pillars, posts, struts, piers, columns and stanchionscomplete all as specified and directed. 117 M&L for formwork for rough finish to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. 118 M&L for formwork for rough finish to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etccomplete all as specified and directed. 119 M&L for mild steel TMT bars 5 to 10mm dia bars as in stirrups cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 120 M & L for preperation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as specified and directed. 121 M&L of water proofing treatment to non-accessibleroof slabwith APP based modified polymeric membrane as per manufacturer’s instructionswith following course of description below :- (a)Applying a priming coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m, till the surface is properly impregnated.(b) Providing APP based 5 layer polymeric membrane minimum weighing 3 .0Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturers instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer(c) Apply two coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membranceNote : 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor 2. The work is required to be carried out at non-accessibleroof slab for double storeyed.The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.) 122 S & F for Anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. 123 M & L for Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified. 124 Fixing for Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid seperately) complete all as specifiedNote : Board obtained from dismantling are 60% reused 125 Aluminium panel (Total 4 mm) shall be composed of non combustible polyethylene core (3 mm) laminated and sandwitched between two fine aluminium sheets (0.5mm). The external aluminium surface shall be coated with superior quality PVDF resin coating (22 to 28 micron) to ensure durability, stability, corrosion and weather resistance. The inside aluminium surface shall be polyster coated ensuring smooth surface as per manufaturers instruction, using 2 x 1plain rectangular tube. Depending upon site condition and as approved by GE colour will be selected, 3M Adhesive tape, weathering sealent and quality hardware.Panel of 1220mm x 3660mm and 1220 x 3050mm Frame work shall be made, matching to the elevation and rigidly fixed to the building by means 3M tape. all the joints of the ACP sheet shall be finished with weatherproofing DOWCORNING 789 sealant as per manufaturers instructions. 126 M & L for Non skid white ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed 127 S&F galvanised steel water tubing (GI pipe), medium grade with all fittings (ISI Marked) and fixed to wall, floor and ceiling or laid in trenches of following bore complete all as specified and as directed :- 128 15mm bore 129 20mm bore 130 25mm bore 131 50mm bore 132 S&F stop valve, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed:- 133 15mm bore 134 20mm bore 135 S&F 15 mm bore bib taps, cast copper alloy CP with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 136 S&Fshower rose 125 mm size chromium plated with or without swivel joints, any size, including fixing to15mm GI pipe or union complete all as specified and directed. 137 S&F15 mm bore hot & coldbasin mixer, cast copperalloy, with capstan heads, chromium plated, Fancy type screwed down for pipe,high pressure, screwed for iron pipe complete all as specified and directed. 138 S&F PVC connection 15 mm size with PTMT nut of following length complete all as specified and directed :- 139 450mm 140 S&F gun metal globe or gate valves, (ISI marked), with iron wheel head, screwed both ends for iron pipe and fixed, for following bore complete all as specified and directed:- 141 15 mm Bore 142 25 mm Bore 143 50 mm Bore 144 Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil comlete all as specified and directed. 145 Excavating over areas, n exc 1.5m deep and gettingout in soft/ loose soil complete all as specified and directed. 146 Excavating over areas, in following depth and gettingout in soft/ disintegrated rock complete all as specified and directed :- 147 Depth not exc 1.5m deep 148 Excavating in trenches nexc 1.5 m width and nexc 1.5 m in depth for foundation etc / for laying of cable/ pipe etc nexc 10 sqm on plan and nexc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. 149 Excavating in trenches nexc 1.5 m width and nexc 1.5 m in depth for foundation or for shafts, well cesspits, manholes etc / for laying of cable/ pipe etc nexc 10 sqm on plan and nexc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. 150 M & L for cement concrete work in pavement/hard-standing of flexural strength 40kg/ per square centimeter in field using 400 kg of cement per cubic meter, thickness of concrete 25 cm or less complete all as specified and directed. 151 M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and directed. 152 M&L for spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. 153 M&L for continuous brick edging; with burnt clay bricks of sub class B with width equal to the depth of the brick; laid dry on end vertically in groundincl all earth work complete all as specified and directed. 154 M&L for 75 mm thick PCC (1:4:8) type D2, (40 mm graded stone agg) as in sub base of hardstanding/ footpath complete all as specified and directed. 155 M & L for 80 mm thick rubber moulded machine pressed precast concrete interlocking paver block with grey cement & no pigment any shape and size confirming to IS-15658-2006 of M-40 Grade as in floor etc, complete all as specified and directed. 156 M&L concrete bed to drain pipes in PCC (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for 150 mmbore sewer pipe line complete all as specified and directed. 157 S & F of 150 mm bore reinforced concrete pipe class NP3 laid, jointed with collar with and including one coller for each length of pipe complete all as specified and directed. 158 M & L for brickwork with fly ash bricks, straight or curved on plan exc. 6.00 m mean radius, built in cement mortar 1:6 complete all as specified and directed. 159 M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb/ benching/ coping, bed plates, for fixing of hold fast,water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. 160 M & L for 15 mm thick rendering in cement mortar 1: 4 using WPC @ 3 % by weight of cement on fair faces of bricks walls including finishing the surface even and smooth without using extra cement complete all as specified and directed. (NOTE: - WPC shall be measured and paid separately under respective item as Supply only.) 161 M & L for 15 mm thick rendering on other than fair faces of brick work or stone masonry surfaces with cement mortar 1:6 finished even and fair complete all as specified and directed. 162 Supply only WPC integral water proofing compound complete all as specified and directed. 163 Construction of 50 users septic tanks including excavation in soft/loose soil, PCC 1:2:4 in foundation, brick work in CM 1:4, RCC M-30 slab cover including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforcement cover with angle iron frame vent shaft and sludge chambers etc. complete all as specified and directed, (Ref TD-217 Sh 1/7 to 7/7). 164 Construction of soakage well 1.2m dia and 3.0m deep, excavation and earth work in soft/loose soil, PCC (1:3:6) using 40 mm graded stone aggregate in foundation, honey comb brick work in CM (1:4), RCC M-25 as in slab, complete all as specified and directed (Ref TD-309 Sh 1/4 to 4/4). 165 M&L for PCC (1:3:6) type C1 (Using 20 mm graded stone aggregate) as in coping, roof kerb, cill, bed block, block for insertion of hold fast of door and window with and including formwork complete all as specified and directed. 166 M & L for 10 mm thick rendering in cement mortar 1:4 on fair faces of bricks walls including finishing the surface even and smooth without using extra cement complete all as specified and directed. 167 M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of bricks walls including finishing the surface even and smooth without using extra cement complete all as specified and directed. 168 M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted, stone masonary work built in CM (1:6) complete all as specified and as directed. Note :- Only quantity of PCC bond stone to be deducted from quantity of random rubble masonary. 169 M&L for Precast PCC (1:3:6) type C-1, using 20mm graded crushed stone aggregate as in bond stones in lieu of stone bond stones, set in cement mortar (1:6), complete all as specified and directed. 170 M&L for stone boulder or broken stone hand packing (Any thickness)at back of wall over arches etc and raising (or lowering) to the required level, complete all as specified and as directed. 171 M&L for raised pointing in cement mortar (1:4) to random rubble masonary uncoursed or brought upto course complete all as specified and directed. 172 Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surfacae not exceeding 40mm to face stone for Lime or sand stone and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto course complet all as specified and directed. 173 S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floor of following size complete all as specified and as directed :- 174 110 mm bore 175 M & L for concrete bed in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in bedding for drain pipes including packing under and completely surrounding pipes with concrete after they are laid & tested in for 110 mm bore pipe complete all as specified and directed. 176 S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and fixed to wall of following size complete all as specified and as directed :- 177 110 mm bore 178 Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. 179 M&L for RCC (design mix) M-25 (20mm graded aggregates) as in walls, retaining wall, basement wall etc.complete all as specified and directed. 180 M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of bricks walls including finishing the surface even and smooth without using extra cement complete all as specified and directed. 181 M & L for black bituminous paint to surfaces of any description wood, steel, Iron, concrete, brick, stone etc., exceeding 10 cm in width or girth complete all as specified and directed. 182 M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed. 183 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 184 Dismantling structural steel work including doors, gates, ladder and framed work of watch tower etc complete all as specified and directed. 185 Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings complete all as specified and directed. 186 Demolition of PCC in ground floorand pavings not exc 15 cm thickness below or above ground levelincluding removal of rubbish out side MOD land complete all as specified and directed. 187 Demolition of RCC n exc 15cm thick (below or above grong level) including cutting of reinforcement to facilitate demolition complete all as specified and directed. Note : Reinforcement obtained from demolition will be considered credit Sch as scrap iron. 188 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:- 189 Area not exc 1.5 sqm each 190 Area exc 1.5 sqm but not exc 4 sqm each 191 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 192 Dismantling of wall and ceilingboards ( fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed. 193 Demolition of reinforced cement concretein Valley Gutter,Column etc andremoving unserviceable material out side cantt area complete all as specified and directed.. 194 Dismantling of ACP Sheet complete all as specified and as directed. 195 S&F connecting & testing distribution board of sheet metal enclosures double door, IP-43, 240V, for using MCBs / MCB isolators with having tinted copper bus bars suitable for 200 Amps ratinghaving following capacity complete all as specifiedanddirected 196 DB SPN, 12 way 197 DB SPN, 8 way 198 S&F MCB single pole with thermal over load as well as magnetic short circuit tripping device with quick break trip free mechanism, robust design and terminals having heat resistant moulding suitable for single phase circuit of 240 volts and 6 to 32 Amps current rating , B Series, 10 KA complete all as specifed and directed. 199 S&F MCB Single pole and Neutral with thermal over load as well as magnetic short circuit tripping device with quick break trip free mechanism, robust design and terminals having heat resistant moulding suitable for single phase circuit of 240 volts and 6 to 32 Amps current rating , C Series, 10 KA complete all as specifed and directed. 200 S&F MCCB three pole and Neutral with thermal over load as well as magnetic short circuit tripping device with quick break trip free mechanism, fix type suitable for three phase circuit of 430 volts of current rating 63/100 Amps, C Series, 16 KA breaking capacity suitable for TPN DB 4/6/8/12 way complete all as specifed and directed. 201 S&F LED fitting 18/20 Watt, 230V,1200 mm long, Surface mounting, withintegrated electronic driver high transcluent frosted diffuser, bipin holders, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 202 Dismantling / taking down and S&F LED 2x2 feet squarefitting 2x18 Watt, 230V,false ceiling mounting, withintegrated electronic driver high transcluent frosted diffuser, bipin holders, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 203 Supply & Fixing Lamp holder/Batten holder with PVC/Polycarbonate body angular/straight fixed on plastic laminated sheet cover round shape 3 mm thick including 01 No LED 10 W suitable for 230 V complete all as specified and directed. 204 S&F Exhaust fan 250 mm sweep PVC bodywith louver shutter complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/0.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed. 205 S&F heavy duty Exhaust fan 450 mm sweep metal body, double ball bearing with louver shutter complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/0.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed. (Note:- Exhaust fan to be connected by submain wiring 1.5 sqmm catered in separate item of the schedule). complete all as specified and directed. 206 S&F LED linear mirror light Aesthetically designed, Provided with a high output PMMA diffuser for glare free light 7 watt. Dimension: 300 mm. incl lamp etc. complete with all accessories in and including connecting up with twin core twisted flexible copper conductor cable with suitable size copper wire complete all as specified and directed. 207 M&L Sub main wiring with 2 single core 1.5 sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit,25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 1x1.0 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. Note :- Two run of 1.5 sqmm & one run of 1.0 sqmm copper cablemeasured as one unit.Note:- Two light points will be controlled by one way switch 5 Amp in false ceiling of 7 mtr height in hall. 208 M&L Sub main wiring with 2 single core 4 sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit,25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 2.5 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. Note :- Two run of 4.0 sqmm & one run of 2.5 sqmm copper cablemeasured as one unit.complete all as specified and directed. 209 Sub main wiring with 2 single core 6 sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit,25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 4 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. Note :- Two run of 6.0 sqmm & one run of 4.0 sqmm copper cablemeasured as one unit. 210 Supply & fix LED street light 48 watt made up of pressure die cast aluminium housing with toughned glass and individual high power LEDs with secondary optics with IP 66 protection, impact resistance of IK07 & 10 KV external SPDincluding cost of GI pipe, bracket, clamps, nut & bolts etc required for fixing of fittings complete all as specified and directed. 211 S&F blanking plate complete all as specifed and directed. 212 M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground levelat any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4mm GI Wirecheck nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI strip upto 7.5 mtrs long with 15 mm dia medium grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items. 213 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete. 214 Fixing only LED 2x2 feet squarefitting 2x18 Watt, 230V,false ceiling mounting, withintegrated electronic driver high transcluent frosted diffuser, bipin holders, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 215 Dismantling and taking down u/s sub-main wiring/service wire of any size including wooden batten / PVC Conduit etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified & as directed. 216 S & F switch Modular single pole,one way 6 Amps , 1 module,230 volts, 50 hzcomplete all as specified and directed. 217 S&F ceiling rose 65 mm 3 terminal / PVC/ polycarbonate, isolated body complete all as speccified and directed 218 M&L for sand cushioning with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cablecomplete all as specified and directed.Note:- Punned thickness shall be considered for payment purpose. 219 Supply and laying cable protection bricks, common burnt clay sub class B designation 75 for protection of UG cable laid in trenches with axis of the bricks perpendicular to the axis of the cable complete all as specified and directed. 220 Supply laying, testing and commissioning of 1100 volts grade XLPE insulated PVC sheathed steel armoured alluminium stranded conductor LT UG cable (conforming to IS 1554) in trenches /ducts /through RCC pipes under roads of size 4 core 25 sqmm complete all as specified and directed.
Contract Date: Mar 20, 2026 Contract Value : 1.46 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttarakhand View Result →
23.
Defence #9800956 AOC
Tender For Provision Of Toilet Block At Stn Hq Devlali And Ceratin Lbw Works Under The Aor Of Ge Devlali; 1 Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm ind cutting holes and making good read shape for hold fast block for new frame complete all as specified and directed. 2 Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 3 S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door window Ceosetory windows & other Frames Chowkhat of size 50 x 75 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder rice husk wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miller joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum Compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length as per direction of Engineer-in-Charge.(Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width for profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make: ECHON/Sintex/Rajshree/Navaratan. 4 S&F 30 mm thick moulded Prelaminated both side WPC factory made 100% solid door (conforming as per per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture both side with density not less than 600 Kg/cum. Manufactured by an ISO 9001-2015 certified company The door should be water proof, termite proof, fire retardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/mm2, modulus of elastic of elasticity 850N/MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fuing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note: Stainless steel butt hinges and necessary SS screws shall be paid separately) 5 S&F 100 mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed 6 SS & F Aluminum Anodised 150mm size barrel tower bolt with bright bolt complete all as specified and as directed. 7 S & F 150mm size aluminum adodised handles complete all as specified and as directed. 8 S & F for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast Each or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed 9 S & F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. 10 M&L for Glazed ceramic tiles of size 300mmx450mmx7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10 mm thick backing coat in CM(1:4) and pointed in coloured cement to match the colour of tile complete all as specified and directed. 11 M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular)size of tile 300mmx300mm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. 12 M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and likeincl 10mm thick rendering in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and mouldingcomplete all as specified and as directed . 13 Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. 14 M & L for Brick work with sub class B bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified. 15 M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed. 16 M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified. 17 M & L rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed. 18 M&L for preparing new plastered or unplastered surfacesputty prepared surfaces of walls, fins/facia/concrete surfaces and applying a coat of interior primer over two coats of oil emulsion distemperingcomplete all as specified and directed. 19 M & L for preparation of new plastered surface of wall,fins/facia/chajjas etc and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over a coat of exterior primer, exterior weather proof offer anti alge high performance exterior wall finish any colour/ tint complete all as specified and directed. Make: Asian (Apex Ultima), Berger (Weather coat). Nerolac (Excel Total) 20 Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. 21 M & L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and as directed. 22 Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 23 Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 24 Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 25 S & F 16mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and celings with adequate nos of clamps or laid in floors including cutting chases in stone concrete block or slab block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASS fittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fttings required for fixing of sanitary plumbing items complete all as specified and as directed. (Note: No extra payment shall be made for cutting chases & CPVC & BRASS fittings) 26 S & F 20mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and celings with adequate nos of clamps or laid in floors including cutting chases in stone concrete block or slab block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASS fittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fttings required for fixing of sanitary plumbing items complete all as specified and as directed. (Note: No extra payment shall be made for cutting chases & CPVC & BRASS fittings) 27 S & F 25mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and celings with adequate nos of clamps or laid in floors including cutting chases in stone concrete block or slab block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASS fittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fttings required for fixing of sanitary plumbing items complete all as specified and as directed. (Note: No extra payment shall be made for cutting chases & CPVC & BRASS fittings) 28 S & F in repairs 20mm bore CPVC gate valves screwd both ends for CPVC pipes complete all as specified and directed. 29 S & F in repairs 25mm bore CPVC gate valves screwd both ends for CPVC pipes complete all as specified and directed. 30 S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. 31 S&F in repairs Vitreous China Urinal, Half stall type, white complete including providing and fixing plus, bedding urinal against wal in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement, including waste pipe, CP urinal spreader complete all as specified and as directed. 32 S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) S Trap/P Trap including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed. 33 S & F in repairs vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests and trap (excluding flushingcistem and flush pipe) including provn of cement concrete bedding complete as fixed. 34 S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed 35 S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. 36 S&F in repairs wash hand basins, vitreous china, of size 550x400mm with padestal (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of foxing of supply and waste pipe etc complete all as specified and as directed. 37 S&F in repairs CP wall mixer with provision for overhead shower with 115 mm Long Bend Pipe on upper side connecting Legs & wall flange Make Jaquar continental series or equivalent Cera, Marc or Parryware complete all as specified. 38 S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed. 39 S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. 40 S&F in repair 15mm bore Bib cock chromium plated Make Jaquar continental series or equivalent Cera, Marc or Paryware complete all as specified and directed. 41 S&F in repair 15mm bore angular stop cock chromium plated with wall flange of Make Jaquar continental series or equivalent Cera, Marc or Parryware complete all as specified and directed. 42 S&F in repair stainless steel soap dish, complete all as specified and as directed. 43 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) 44 S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including fixing stac clamps complete all as specified and as directed. 45 S&F for 75mm bore of PVC (SWR) pipes single socketed in any leggth with rubber ring joints laid in trenches or in floors including. fixing stac clamps complete all as specified and as directed. 46 S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed. 47 S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. 48 S&F PVC (SWR) bend any radius 75mm complete all as specified and directed 49 S&F PVC (SWR) bend any radius 110mm complete all as specified and directed. 50 S & F in repair PVC (SWR) floor trap 75 mm bore plain with grating including jointing with solvent cement and fitting complete Each as spd and directed. 51 M&L for Coloured chequered cement concrete tiles 30cmx30cmx20-22 mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment over 15 mm thick screed bed in CM (1:6) including dismantling of existing chequered tiles of any type complete all as specified and as directed 52 M&L for coloured machine pressed precast cement concrete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and pigment laid in floor/path incl dismantling complete all as specified and directed. 53 M&L for 75 mm thick Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring or in any position complete all as specified and directed. 54 Dismantling of posts or struts (wood, steel or R.C.C) any section embedded in concrete, including taking out embedded portion and making good disturbed ground all as specified and as directed. 55 Excavation in post holes(or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to distance not exc 50mand making good surfaces, complete all as specified and as directed. 56 M &L for PCC 1:4:8 type- D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and as directed. 57 S&F for MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars, barred iron doors, ladders; framed balusters, walk ways, railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed. 58 M & L for Mild steel rolled sections Fe-410-W (Gde-E-250) as in Compound girders and stanchions, lattice girders, aerial masts. hollow pipes any sec for shed etc, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed. 59 M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified 60 S & F painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC Sheet, including Nainital or similar pattern roof coverings complete all as specified and as directed. 61 S&F Pre-painted galvalume aluminium zinc coating Gi based plain steel sheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl filling of gaps between wall and sheet with PCC 1:2:4 (20 mm graded agg)/ brick work CM 1:4 and plastering the surfaces with CM 1:4 on both side where required cost of the same shall be deemed to be included in quoted rate complete all as specified and as directed. 62 Surface excavation n. exc 30 cm deep and averaging 15 cm deep getting out in soft and loose soil all as per specified and directed 63 Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed. 64 Returing filling in inci spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed 65 Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed. 66 Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and remqyal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed 67 M & L for 150 mm dia (internal dia) RCC hume pipe class NP-2 laid and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed. 68 M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 150 mm bore ind forming cradles complete all as specified and directed. 69 MSL for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed. 70 Taking down carefully existing unserviceable bitumen felt/ APP membrane including plaster/padding (any number of layers of any thickness of plaster or padding) etc and removing of the rubbish to a distance not exceeding 500m from the building and depositing complete all as specified and directed. 71 M&L for rendering 10mm thick CM (1:4) on RCC/ concrete roof/terrace surfaces mixed with water proofing liquid complete all as specified and as directed. Note: Water Proofing liquid shall be measured and paid separately. 72 Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. 73 M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under:-(a) Apply a uniform coat of primer at 0.70 kg/sqm over cement plaster.(b) 3 mm thick and weighing not less than 3.6 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen-based prefabricated five layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary of surface complete as per manufacturers instructions(c) Apply two coats of bitumastic-alminium paint over the membrane over non assesible roof surfaces complete all as per manufacturers instructions and as directed 74 M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6) complete all as specified and directed by engineer in charge. 75 M & L for TMT steel bars 10mm dia and over, cut to le ngth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all specified and directed. 76 All as per item above but Ms tie bars 8mm dia and over upto and including 8mm dia as in stirrups, spacers and binders complete all as specified and as directed. 77 M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed. 78 M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished complete all as specified. 79 M & L for precast cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for man holes etc.)chullah hoods,chajjas, water troughs, mangers, shelves and similar articles with plain facesand setting in morter complete with joints to match complete all as specified and directed. 80 Supply and laying of Reinforced concrete pipes, 200mm dia class NP 3 with one collar per length of pipe complete all as specified and directed. 81 M&L for concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200 mm & bore pipe, complete all as specified and directed. 82 M & L for RCC septic tank, design to carry sewage and sullage water, excavation in any type of soil PCC 1:4:8 below foundation, RCC M-30 Design mix in walls base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc, complete for 150 users all as per Drawing No. STD/S/2023/01 Sheet No. 1/2 to 2/2 date 11 OCT 2023 83 M & L for Sokage wells exc, in any type of soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including intersepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonary/ filling with brick bats, complete of size 3.00M dia X 3.00 m deep for 150 users all as per Drawing No. CEPZ/2019/TD/03 Sheet No. 1/2 to 2/2 date 30.04.2019 84 M & L broken stone hard core of guage n.exc 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surfaces complete. 85 M & L for 100mm thick Cement concrete 1:2:4 Type B-2 (using 40mm graded agg) as in sub base complete all as specified and as directed. 86 M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and similar work; vertical or to batter complete all as specified and directed. 87 M & L for Formwork to sides of pillars, posts, struts, piers,columns and stanchions square or rectangular rough finished surfaces of concrete laid flat complete all as directed. 88 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. 89 M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough toreceive plaster all as specified and directed. 90 M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete. 91 M & L for RCC Type B-1 (1:2:4) using 20mm graded agg as in footings, plinth beamand bases of columns complete all as specified and as directed. 92 M & L for RCC Type B-1 (1:2:4) using 20mm graded agg as in beams,lintle/plinthbands cantilevers, bressumers, lintelover 1.5m clear span supported on walls complete all as specified and as directed. 93 M & L for RCCType B-1 (1:2:4) using 20mm graded agg as in columns , piers postsand struts complete all as specified and as directed. 94 M & L for RCC Type B-1 (1:2:4) using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed. 95 M & L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint after one coat of white primer complete all as specified and directed by engineer in charge. 96 M & L for preparing newly plastered surfaces of ceiling incl preparation of surfaces and applying three coats of white wash complete as spd and directed. 97 M & L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified. 98 S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x1005mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan 99 M & L for rolled mild steel work angle ironas in door frame (Chowkhats) confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. 100 M & L for Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed. 101 M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to newsteel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. 102 S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete. 103 S & F vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete asfixed complete all as specified. 104 S & F vitreous china wash down water closet pan (pedestal pattern), EWC white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified. 105 S & F 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified. 106 S & F 15 mm dia CP Stop valves/angle valve, cast copper alloy, screwed down, high pressure,fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified. 107 S & F 15 mm dia CP bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified. 108 S&F CP wall mixer with provision for overhead shower with 115 mm Long Bend Pipe on upper side connecting Legs & wall flange Cat Pot No FLR-5273UPR of Jaquar or equivalent in kohlar, grohe and Roca complete all as specified and directed. 109 S&F Centre hole basin mixer with Popup Waste System with 450 mm Long Braided Hoses 20 mm cartridge size mm dia, Cat Pot No FLR-5167NB of Jaquar or equivalent in kohlar, grohe and Roca completeall as specified. 110 S&Fchromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs. 111 M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6, complete all as specified and as directed. 112 M & L for glazed ceramic tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed. 113 S & F PVC (SWR) floor trap 75 mm boreplain with grating including jointing with solvent cement and fitting complete all as spd and directed. 114 S&F vitreous china wash hand basin counter oval type size 600x425x195mmunder granite slab with all fitting and fixturescomplete all as specified and as directed. 115 S & F for 32mm Bottle trap of CP having minimum water seal of 25mm .(Minimum weight complete all as specified and as directed. 116 S&F Vitreous China Urinal, Half stall type, white, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, sprinkler etc pointing around urinal back in cement, including waste pipe, CP urinal spreader complete all as specified and as directed. 117 S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including fixing stac clamps complete all as specified and as directed. 118 S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. 119 S&F for 110mm PVC (SWR) vent cowl complete all as specified and as directed. 120 M&L for rendering 10mm thick CM (1:4) on roof slab top and sides finished even and smooth without using extra cement, mixed with water proofing liquid complete all as specified. 121 M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :-i) Apply one coat of oil bound bituminous primer @ 0.70 kg/Sqm.ii) Providing and laying3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturers.iii)Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturers instructions and as directed . 122 M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded glossy finish with coloured cementandpigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. 123 Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittingsand making good disturbed surfaces of walls, floor etc.complete all as directed. 124 M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cableand one single core 1.5 sqmmsizecopper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters etc.fixed in recess of wall with brass chromium plated screws and cap washer complete for 125 One light point controlled by one switch 126 One 5 pin socket outlet. 5 Amps on the same board. 127 One 5 pin socket outlet. 5 Amps on the independent. board 128 One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire. 129 Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied . 130 Supply and fix switch socket combination 3 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed. 131 Supply and fix switch socketcombination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed. 132 Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed. 133 Supply and fix in repair sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed ofsize 8 Ways 134 Supply and fixing amp rating 240V,10KAC curve MCBand current carrying capacity in the MCB DB complete with connection testing and commissioning of SP 6 to32 Amp complete all as specified and directed. 135 Supply and fixing amp rating 240V,10KAC curve MCBand current carrying capacity in the MCB DB complete with connection testing and commissioning of SPN32 Amp complete all as specified and directed. 136 S&F wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten doubleside connection type complete all as specified anddirected. 137 S&F wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed. 138 Supply and fixMCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCBSPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete. 139 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, air delivery > 800 CMH , 5 number of blades voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m with louvre for fixing of exhaust fan complete fixed with suitable size ply by cutting into suitable size as required complete. 140 Supply and fixing building LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. 141 M&L for sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 4 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed. 142 S&F in sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed. 143 S & F Geyser 25 Ltrs, vertical mount, 5 star rated, glass line coated tank with adjustable thermostat, suitable for ,230 volt, 2 kw , 50 Hz electric supply . 144 Supply, Laying , jointing and testing in replacement of LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizesand aluminium lugs for connection complete all as specified and directed of size 16 Sqmm 2 core. 145 M&L forXLPEinsulatedarmoured heavy duty electric cable with aluminium conductor, 1100V grade, cross sectional area as given th size of 10 Sqmm 2 Core 146 Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable, water pipe and getting out in soft/loose soil complete all as specified and directed. 147 Returning, filling in excavated soil in trenches including spreading, leveling, watering and well rammingin layers n. exc. 25 cm thick complete all as specified and directed 148 Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 149 Supply & lay in trenches double walled corugated HDPE pipe 50 mm diafor protection of under ground cables( Note: pipe couplers with seal, bends, end coversetc are deemed to be included in rate quoted) 150 S&F LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCAsheet with snap on installer sutable fordouble side connection LED tube in and including batten and tube etc complete in all respect. 151 S&F 25 Watt New generation energy saving and environmental friendly long life LED Security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07. 152 M & L for bracket made out of GI tubing 40 mm dia,light grade 0.75 mtr long including fixing withMS clamps -2 Nos made out of 25 mm wide 4 mm thick flat iron with M.S. nuts, bolts/screw-4 Nos & flat washer01 No. for each including preparation of steel surfaces and painting with two coats of paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed. 153 M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground all as specified and directed (earth pit not less than 2.25m below normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to GI wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanized iron all as shown in Electrical Plate No. 3 connected to earth test point all as specified or indicated and testing on completion including necessary excavation and earth work in any type of strata, PCC pit and RCC cover, GI protection pipe 15mm bore light grade , watering pipe, wire mesh etc. all as specified and directed by Engineer-in-Charge. 154 Supply and lay 40 mm bore GI tubinglight grade, ISI marked, for cable protectionatroad crossing/floor/wall/ on poles or at any indicated situation etc duly sealed at both end after drawing cable including necessary clamps,saddels etc complete all asspecified and as directed. 155 Supply , lay, connect and test GI tubing 25 mm bore medium grade ISI marked with all fittings laid intrenches etc complete all as specified and as directed. 156 Supply and fixing gun metal globe or gate valve with iron wheel head screwed both end for iron pipe and fixed of 25 mm bore complete all as specified and as directed. 157 Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20 mm complete all as specified and as directed. 158 Note: Amount of sch of credit of Rs.25,671/-will be deducted from total amount of BOQ.
Contract Date: Feb 04, 2026 Contract Value : 30.38 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Maharashtra View Result →
24.
Defence #9749478 AOC
Tender For Provision Of Guard Room Along With Toilet At Dca Colony And Offers Mess Of 116 Engr Regt And Provn Of Hard Standing Near Security Post Barries No 1 Under Ge (West) Bareilly; 1 Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. 2 Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loosesoil complete all as specified and directed. 3 Excavation in trenches exc 1.5 m & n.exc 3 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 3 m in depth and getting out in soft/loosesoil complete all as specified and directed. 4 M&L for cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) etc in foundations, filling and mass concrete complete all as specified and directed. 5 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 6 M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter for rough finish surface of concrete complete all as specified and directed. 7 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)as incolumns, pillars, pierrs, posts & struts etc complete all as specified and directed. 8 M&L for form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape all complete all as specified and directed. 9 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)as in beams cantilevers bressumers, lintels over 1.5m span etc complete all as specified and directed. 10 M&L flat form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed. 11 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc complete all as specified and directed. 12 M&L for form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc flat rough finished surfacescomplete all as specified and directed. 13 M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in chajjas complete all as specified and directed. 14 M&L for formwork to rough finished surfaces of contrete ofchullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. 15 M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. 16 M&L for mild steel TMT bars 8mmto 10mm dia as in stirrups, spaces and binder, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. 17 M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. 18 M&L for 20 mm thick damp proof course in cement motar 1:2 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. 19 M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and directed. 20 Supply only liquid Water proofing compound complete all as specified and directed. 21 M&L for rendering 12 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. 22 M&L for rendering 15 mm thick in CM 1:4 using WPC on fair faces of brick work or concrete surfaces of wall of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.Note:- WPC shall be measured and paid and separately. 23 M&L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar 1:3 newly surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed. 24 M&L for 15 mm thick rendering in cement mortar 1:3 on roof top using water proofing compound on RCC roof surfaces complete all as specified and directed. 25 M&L for applying two coat of distemper oil emulsion(with airless electric spayer) white or tinted over 1 mm thick wall care putty on newly decorated or undecorated wall surface including preparation ofsurfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. 26 M&L for applying two coat of distemper oil emulsion(with airless electric spayer) white or tinted on 1 mm thick wall care puttynewly decorated or undecorated ceiling, soffits of slab surfaces including preparation ofsurfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed. 27 M&L for two coats ofweather proof paint over two coats of exterior primer on 1 mm thick putty complete all as specified and directed. 28 M&L for ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm andnot exceeding 0.38 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed. 29 M&L for ceramic tiles light shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exec 0.16 sqm andnot exceeding 0.36 sqm as in vertical surfaces and screed bed / rendering and provn of rendering 10 mm thickin cement mortar 1:4, as in backing layer complete all as specified and directed. 30 M&L for Glazed (plain /coloured) ceramic tiles wall 300x600x7mm thick on vertical faces of walls including 10mm thick renderingin CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. 31 M&L for non- skid ceremic colouredtiles7 to 8 mm thick(Square / rectangular) areaof each tile exceeding0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to match and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. 32 S&F 18-20 mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing complete as in riser & steps, cills, wHB platforms and like jointed in cement mortar 1:4including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed . 33 M&L for broken stone or boulders or hard core gauge n.exc 63mm , deposited spread and levelled in layers n exc 15cm thickness and rammed to a true surfaces complete all as specified and directed. 34 M&L for sand filling under Interlocking paver block including watering, consolidation and compaction with plate vibrator complete all as specified and directed. 35 M&L for 100 mm thick PCC 1:4:8 type D 2 (using 40 mm graded stone aggregate) as in sub base under floors complete all as specified and directed. 36 M&L for 50 mm thick PCC 1:2:4type B1 (using 20 mm graded aggregate) as in flooring & finifshed with matalic hardner complete all as specified and as directed. 37 M&L for 75 mm thick PCC 1:3:6 type C 2 (using 40 mm garded aggregate) as in plinth protection complete all as specified and directed. 38 M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. 39 M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. 40 M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. 41 M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. 42 M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. 43 S&F for 30 mm thickflush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side complete all as specified and directed. 44 S&F 105x60mmx2mm thick pressed steel, frames for door with one or more rebates including filing andinner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surface complete all as specified and directed. 45 S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions complete all as specified and directed. 46 S&F factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions complete all as specified and directed. 47 S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three trackswith stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick figured glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clipsa, frame made with aluminium section as appended below-(i) Window frame :92 x38 mm X 1.15 mm thick for three tracks. 68.4x38mm X 1.15 mm thick fortwo tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. 48 S&F for 100mm long stainless steel butt hinges complete all as specified and directed. 49 S&F for 200 mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 50 S&F for 200mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 51 S&F 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed mild steel complete all as specified and directed. 52 S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 complete all as specified and directed. 53 M&L for cement concrete Type B-1 1:2:4 (20mm graded agg) as in coping, window cills, water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. 54 S&F vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with Por S trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed. 55 S&FPVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. 56 S&F fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. 57 S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed. 58 S&F 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed. 59 S&F 20 mm bore CPVC water tubing with all fittings medium grade and fixed complete to wall and ceiling or laid in floors incl taking down of existing pipe line of any description complete all as specified and directed. 60 S&F 25 mm bore CPVC water tubing with all fittings medium grade and fixed complete to wall and ceiling or laid in floorsincl taking down of existing pipe line of any description complete all as specified and directed. 61 S&F 100mmx100mm stainless steel grating fixed complete all as specified and directed. 62 S&F fancy type stainless steel towel rail size 600mm long including a pair of brass bracket complete all as specified and directed. 63 S&F vitreous chinaware coloured wash hand basin with padestal of size 55X40X82cm complete including CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinning in walls & making good complete all as specifed and directed. 64 S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. 65 S&F designed looking mirror area exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers, complete all as specified and directed. 66 S&F of PVC corner set of three of size (12X12 ,9X9 and6 X6 ) with railling and complete all as specified and directed. 67 S&F fancy type 15 mm bore brass chromium plated pillar tap for WHB screwed down for iron pipe and fixed to WHB complete all as specified and directed. 68 S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specified and directed. 69 S&F stainles steel Curtain Rod 25 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod complete all as specified and directed. 70 S&F 1000 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position and any description all as specified in SSR Part I complete all as specified and directed. 71 S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified and directed. 72 S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 73 S&F Mild steel OHT cage, bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed. 74 S&F PVC (SWR) 110 mm diasoil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed. 75 S&FPVC (SWR) 110 mmbore bends all as specified or as directed. 76 S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed. 77 S&F spun iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified 78 S&F 100mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door 79 S&F 75 mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door 80 S&F 75 mm bore PVC cowl complete all as specified. 81 S&F stainlesssteel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed. 82 S&F for computerised reflective letter / bldg number on ACP sheet (size 45mm x 45mm) and fixing with 04 nos of screw, rawal plug etc on wall in front of building complete all as specified and directed. 83 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed. 84 Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed n. exc 1.50 M above the starting point in soil complete all as specified and directed. 85 M&L for providing interlocking tiles path over 25 mm sand layer over 75 mm thcik PCC , type C2 (using 40 mm graded stone aggregate) as in floors complete all as specified and directed. 86 M&L for PCC kerb stone outer coloured surface machine pressed factory made of size 350 mm long , 300mm wide, 150mm thick and 350 mm in deepusing as in PCC (1:2:4) type B1 (using 20 mm graded stone agg) including form work weathering, slightly rounded or chamfered angles and throating all as specifed and directed 87 M&L for plain cement concrete 1:3:6 type C2 (Nominal Mix) using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed 88 M&L for plain cement concrete 1:2:4 type B1 (Nominal Mix) using 20 mm gaded stone aggregate as in surface channel & drain complete all as specified and directed 89 M&L for brick work with sub class b bricks class designation 75, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:4 complete all as specified and directed. 90 M&L for rendering 15 mm in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth using extra cement complete all as specified and directed. 91 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. 92 Add or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete complete all as specified and directed. 93 Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level n. exc 1.50 m above the starting point completeall as specified and as directed. 94 Surface dressing n.exc. 15 cm deep in soft/ loose soil including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth roots, and trees complete all as specified and directed. 95 M&L precast cement concrete block masonry with solid blocks of plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed. 96 M&L for Hardcore of broken stone or boulders of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed. 97 M&L for PCC, 1:1.5:3 (using 20 mm graded stone aggregates) in foundations, flling, base of hard standing and mass concrete etc. complete all as specified and directed. 98 M&L for forming Contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound Gared B complete all as specified and directed. 99 M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade B, thickness of concrete slab 200mm complete all as specified and directed. 100 M&L for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI markednot less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered withmodular plateand cover of suitable size with new brass screwsfor mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with strandedcopper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for the following:-(a) One light / fan/ exhaust fan point controlled by one switch. 101 All as per item No. 100 here in before but for one 5 pin 5 Amp switch socket out let point on an independent board. 102 All as per item No. 100 here in before but for one 3 pin socket outlet 5 Amps on the same board 103 All as per item No. 100 here in before but for one 15 Amp 6 Pin switch socket out let independent with2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistrandedincl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified. 104 S&F modular switch one way 6 A, 1 Module complete all as specified and directed 105 S&F modular switch one way 16 A, 1 Module complete all as specified and directed 106 S&F modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed. 107 S&F modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed 108 S&F modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed. 109 S&F ceiling rose PVC/ Poly carbonate,Isolated body, threeterminal AC 230 volts complete all as specified and directed. 110 M&L for lamp holder, PVC / Poly carbonate, insulated bodymodular type with back plate batten/angle type for batten fittings complete all as specified and directed. 111 S&F LED mirror light fitting of 1 x 10 wattLED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection complete all as specified and directed. 112 S&F LED mirror light fitting of 1 x 20 wattLED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection complete all as specified and directed. 113 S&F LED lamp 12 Watt, 230 V, AC integrated circuit complete all as specified and directed. 114 S&F LED Bldg Street light fitting 35 - 36W, IP 65 made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection, roadway luminaire with high powerLED as light source 1 x 35/36 Watt, LED 6000K, complete with all accessories internally pre-wired complete all as specified and as directed. 115 S&Fceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 116 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. 117 S&F MCB SPN 40 Amp 240 volt complete all as specified and directed. 118 S&F MCB single pole 6 to 32 Amp 240 Volt B curve 10 KA complete all as specified and directed. 119 S&F flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar, earth bar and neutral links complete complete all as specified and directed. 120 M&L for earthing complete with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased inand including 15 mm dia GI light grade pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe light grade as water pipe from earth chamber andincluding excavation and earth work, PCC 1:3:6 typeC1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as specified and directed. 121 Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm, 2 core complete all as specified and directed. 122 M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as specified and directed. 123 M&L for old size bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 complete all as specified and directed. 124 S&F GI tubes light grade of dia 80 mm bore dia with all fitting and fixed complete for protection of LT UG Cables laidto walls or in floors or along with poles etc complete all as specified and directed.
Contract Date: Mar 06, 2026 Contract Value : 47.56 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Uttar Pradesh View Result →
25.
Defence #9749466 AOC
Tender For Provision Of Bathroom/Toilets For Ors Single Living Accommodation In Gr Unit Under Ge (W) Pathankot.; 1 Surface dressing in loose / soft soil n exc 15 cm deep complete all as specified and as directed. 2 Surface excavation in any type of soiln.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out 3 Excavating in any type of soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out 4 Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed. 5 Removing excavated materials( soil) obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed. 6 M&L for Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed. 7 M&L for Hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cmrammed to a true surface complete all as specified and directe. 8 M&L for 75 mm thick Cement concrete type D-1, 1:4:8 (20mm graded crushed stone aggregate) as in sub floor, Sub bases, floors and pavings etc complete all as specified and as directed. 9 M&L for 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded crushed stone aggregate) as in sub floor, Sub bases, floors and pavings etc complete all as specified and as directed. 10 M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in sub floor, Sub bases, floors and pavings etc to receive the tile complete all as specified and as directed. 11 M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade including 25mm thick compacted bed of coarse sand cushion , compacting and proper embedding/ layingof inter locking paver blocks into the sand bedding layer , filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.all as specified and as directed by Engr-in-Charge. 12 M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges o, in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directed 13 Formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed. 14 Formwork to Square, rectangular or polygonal sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. 15 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. 16 Formwork to sides and soffits offloor or roof beams, beam haunch ings, girders, bressummers,lintels, cantilevers, shelvesincluding sup- ports, overhangs, etc. also splays between floors andbeams, etc.complete all as specified and as directed. 17 M&L for TMT bars 6mm to 8 mm cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. 18 M&L for TMT bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge. 19 M&L for Reinforce cement concrete M-25 (Design mix) Foundations, including rafts, footings, basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. 20 M&L for Reinforce cement concrete M-25(Design mix)as in Slabs supported on walls, beams and columns in floors, roof slab, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. 21 M&L for Reinforce cement concrete M-25(Design mix)as in Beams,Plinth/Roof beam cantilevers, bressummers,lintels over1.5m span complete all as specified and as directed. 22 M&L for Reinforce cement concrete M-25(Design mix)as in Columns,pillars, piers, posts and struts complete all as specified and as directed. 23 M&L for brick work with sub class B Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and as directed. 24 M&L for Brickwork withsub class B Bricks old size brick, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed. 25 M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces wall in cm 1:6 to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed. 26 M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cm 1:4 to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed. 27 M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in cm 1:3 to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed. 28 Supply only `Liquid Water Proofing Compound complete all as specified and directed by Engr-in-charge. 29 M&L for preparation of newly plaster surfaces of walls and applying two coats of oil bound distemper over a priming coat of chalk whiting, on plastered surfaces, preparatory to distempringcomplete all as specified. 30 M&L for preparation of newly plaster surfaces of walls and applying two coats of cement base paint over a priming coat of alkalies resistance priming paintcomplete all as specified. 31 M&L for preparation of newly plaster surfaces of walls and applying three coats of white wash over ceiling complete all as specified and as directed. 32 S&F Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20 mm thick screed bed in CM 1:6 complete all as specified. 33 S&F Coloures Glazed ceramic tiles in vertical surface 350x 250x 7-8 mm/ 450X 350X 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendring of10mm thick cement plaster in CM 1:3 on fair faces of brick work or concrete surfaces complete 34 S&F 20 mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as specified and as directed. 35 S&F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as specified and as directed. 36 M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed 37 S&F vitreous china wash down water closet pan (Pedestal Pattern ) white including fixing bolts, plastic water closet seat, white, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete and including making good to floor to match with adjoining surfaces complete all as specified and as directed 38 S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding, making good to floor and all fittings (excluding flushing cistern and flush pipe) complete all as specified and as directed. 39 S&F vitreous china under counter wash basin with fixing accessories, ovalshape snow white of size 560 x 400 x 205 mm, incl 32mm dia brass chromium plated waste coupling and including waste pipe complete all as specified and as directed.Make: Oval Cat no. S2030103 of Jaquaror equivalent in any of the make mentioned in list of product. 40 S&F Viterous China urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and waste coupling fit to urinal and including 60mm long brass screws,with urinal waste pipe pointing around urinal back in cementincluding waste / Urinal pipe complete all as specified and as directed. 41 S&FUrinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed. 42 S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed. 43 S&F brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and as directed. 44 S&F PVC10 ltrs capacity valveless syphonic action type low level flushing cistern including flush pipe, cantilever brackets incluiding taking down existing cistern etc complete all as specified and as directed. 45 S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. 46 S&F Pillar taps fancy type cast copper alloy chromium platedwith capstan head without letter Hot or Cold waterscrewed down for 15 mm diairon pipe complete all as specified and as directed. 47 S&F 15mm bore dia of pipe bib taps cast copper alloy, fancy type chromium plated, with capstan head screwed down, high pressure screwed for iron pipe or brass ferrule complete all as specified and as directed. 48 S&F stop valve / angle cockfancy type cast copper alloy chromium plated with long shank and cup(concealed type) capstan head serewed down, high pressure for 15 mm dia iron pipe complete all as specified and as directed. 49 S&Fbrass chromium plated health faucet with 1m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe or2 in one tap complete all as specified and as directed. Make: ALD -563 Jaquar orequivalent in any of the make mentioned in list of product complete all as specified and as directed. 50 S&F brass chromium plated toilet roll holder with flap complete all as specified and as directed. Make : AKP - 35753P of Jaquar orequivalent in any of the make mentioned in list of product. 51 S&F CP Grating with hole /with out hole of dia 125 mm complete all as specified and as directed. 52 S&FGun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe 53 S&F looking mirror bevelled edges of selected quality glass mounted on 6mm commerical ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and as directed. 54 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be coucred with heat moulded wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side as gap insert for top rail bottom rail panelling of wood grain printed PVC sheetto be fited in the MS frame welded/seald to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixed in the framed site as per specification & drawing complete all as specified and as directed. 55 S&F PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet reiforced withMS squre tubeas perspecification and drawing complete all as specified and as directed. 56 M&L for Powder coated (of approved color) aluminium sections as in frame & shutter of windows, ventilators as in sliding / openable / louvers / fixed/hangtype with and including necessary rolling for smooth moving & locking arrangement, etc. fixed to wall including, preparation of disturbed portion both sides (internal & external surfaceof wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-in-charge. 57 S&F 250mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 58 S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed. 59 S&F 150mm size,extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. 60 S&F 100 mm sizeSS butt hinges with galvanised mild steel hinges complete all as specified and as directed. 61 S&F 110 mm bore PVC (SWR) pipes single socketedin any length with rubber ring joints fixed to walls complete all as directed. 62 S&F 110 mm bore PVC (SWR) pipes single socketedin any length with rubber ring joints laid in trenches complete all as directed. 63 S&F 110 mm bore PVC (SWR) bends complete all as specified and as directed.. 64 S&F 75/100mm PVC(SWR) floor trap plain withgrating incl jointing with solventcement complete all as specified and as directed. 65 S&F 110 mm bore PVC (SWR) cowl complete all as specified and as directed.. 66 S&F 110 mm bore PVC (SWR) accessible door bends complete all as specified and as directed.. 67 S&F 5 mm thickplainglass sheet, pin head type or-dinary quality and glazing with oil putty / beading in square n exc 0.5 sq. m in each pane, complete all as specified and as directed. 68 S&F 3 mm thick tinted/frosted sheet glass figured, pin head type or-dinary quality and glazing with rubber neoprene packing for aluminium door/windows in square n exc 0.5 sq. m in each pane, complete all as specified and as directed. 69 S&Fstainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed. 70 M&L for 16-18mm thick Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cementmortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to matchwith shade of granite complete all as specified and as directed. 71 S&FRotational moulded polyethlene water storage tanks white in colourthree layers of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mmBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and including inlet and outlet tank nipple of 20 mm boreand fixed. (Minimum weight 20mm-210 gms complete all as specified and as directed. 72 M&L liquid water proofing treatment to RCC roof slabin following procedure : (a) Prepare the surface by cleanining with concrete surface grinder/ wire brush and a high pressure water jet and ensure that it is free of dust, oil and loose particles. Damaged portions, hollow area must be repaired with epoxy mortar and repair cracks of old concrete by cutting V groove, corners and joints of drain pipes, channels etc. treated with epoxy mortar prepared with epoxy primer (as per manufacturers instructions).(b) Laying 10mm thick rendering in Cement mortar 1:3 with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of concreteroof surfaces, finished even and fair to receive treatment on roof Complete (c ) Applying three coats of polyurea waterproofing coating as per manufacturers instructions for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx. 500% ± 50% and tensile strength at 14 days of 5MPa.(d)The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge / Consultant. (Note:- minimum 6 hrs interval between two coat shall be maintained)(d) All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system.Note:- (i) Work to be carried out by authorized applicator and as per manufacturer’s instructions.(ii) Providing test with filling of water for continuous 48 hours if there is any leakage than entire treatment will be done again by contractor without any additional cost.(iii) The rate includes for filling cracks in existing roof with epoxy cement mortar using suitable bonding agent before laying cement plaster. 73 M&L for 150mm bore Reinforced concrete pipes(ISI marked), class NP3, laid and jointed in cement mortar complete with collars, laid in trenches and testedcomplete all as specified and directed by Engr-in-Charge. 74 M&L for Concrete bed type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) to150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;complete all as specified and as directed. 75 M&L for Providing factory precastce- ment concrete type B1 1:2:4 (20 mm graded aggrgate) as in but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces 76 Sch A Part-I E/M Portion:-M&L for point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H 1100 volte grade cable, withand including PVC rigid concealed conduit (ISI marked) with all fittings including sheet steel/CI terminal box of adequate size including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable as earth continuity conductor connected to comman earth dolly, complete all as specified and directed.Note:- 1. connection of cable with MCBs/switch sockets shall be done through proper size copper /brass thimbles.2.Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible. 3.Proper colour coud will be used for wiring as per the electrical rule and as directed. 77 All as per Srl item No 76 here-in-before but for 5 pin 5 amps socket outlet on the independent board controlled by one switch SP, one way 5 Amp, 240 Volts. complete all as specified and directed. 78 All as per Srl item No 76 here-in-before but for 5 pin 5 amps socket outlet on the sameboard with other switch complete all as specified and directed. 79 M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable with in and including PVC concealed conduit heavy duty with all fittings including anodise pressed steel sunken box with bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface tomatch with the existingsurface complete all as specified and directed. 80 M&L for point wiring with 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable with in and including PVC concealed conduit heavy duty with all fittings including anodise pressed steel sunken box with bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface tomatch with the existingsurface complete all as specified and directed. 81 S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed. 82 S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed. 83 S&F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed. 84 S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed. 85 S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specifiedand directed. 86 S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed. 87 S&F CFLs with LEDLamp, B22type ,12 watt,complete all as specified and directed. 88 S&F energy saving decorative LED boxtype 20 W, 6500K,cool white, Lumen efficiency 110 lumen/watt, light fitting PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and making connections with twisted flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge. 89 M&L for providing/ cutting the round/ square hole of required size in wall finishing thedistrubed surfaces as per existing finishes complete all as spd and S&Fing MS ventilating fansSingle phase, 230 volts 300 mm or 12” H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable suitable size from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. 90 S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed. 91 S&F MCB SP 240 volts any rating from 6 to 40 amps, B cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. 92 S&F MCB SPN 240 volts any rating from 6 to 40 amps,B cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. 93 S&F energy saving , surface mounted, bulk head luminaire 10 watt with PDC aluminium housing and polycorbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible suitable size copper conductor cable complete all as specified and directed by Engr-in-Charge. 94 S&F bldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length not less than 0.9 mtr fixing with clamp etc and making connections using suitable size copper cable from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. 95 S&F sheet metal encloser with MCB DB single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp 240 volt complete with one single pole MCB 20 Amp C curve complete all as specified and directed 96 Supply and installation of the electric water storage heater of ABS body type, 25 ltr capacity with rated power 2KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangements and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and as directed. 97 M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)withtop edge of the platenot less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precastPCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth workin any type of soil , removal of surplus soil to a distancen.exc 50m and connecting , testing on completion completeall as shown on electricplate No 05 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted). 98 Supply, laying and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 2 core complete all as specified 99 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed. 100 Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified. 101 Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 102 M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified(Note:-Punned thickness shall be measured and paid) 103 M&L for brick covering equal to length of bricks as mechanical protection to cable with well burnet sub class ‘B’ bricks laid as directed by the Engr-in-Charge. 104 S&F GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall/Pole including fittings /clamp complete all as specified and directed. 105 M&L for galvanised steel tubing medium grade,25 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor all as specified 106 S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipes of 25 mm bore all as specified and as directed. 107 M&L for cutting/drilling of 50/80mm GI pipe for connection of 20mm GI pipe including all required accessories and earth work if required complete allas specified and as directed by Engr-in-Charge.
Contract Date: Mar 10, 2026 Contract Value : 24.23 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
26.
Defence #9749462 AOC
Tender For Special Repair To Md Accommodation Building No. Np-28/1 To 06 At 12 Fd Area Of Gr Unit Under Ge (W) Pathankot.; 1 Sch A Part-I B/R Portion:-Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed. 2 M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)complete all as specified and directed. 3 All as per item No 02 here-in-before but except bricks.NOTE: Old burnt clay bricks retrieved from demolition shall be used. 4 M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. 5 Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed . 6 Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris outside from defence landcomplete all as specified and directed . 7 Surface dressing n exc 15 cm deep in any type of soil complete all as specified and directed by Engr-in-Charge. 8 M&L for hard core of broken stones or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed 9 M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base finishing surfaces of concrete to be even and rough to receive the topping layer complete all as specified and as directed. 10 M&L for 60mm thick M-40 Grade, rubber moulded glossy finish Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 with grey cement and pigment (50% red and 50% yellow) including 25mm thick sand cushioning bed complete all as secified and directed. 11 M&L for precast cement concrete block masonry (kerb stone), 1:2:4 type B-1 using 20 mm graded crushed stone aggregate with solid block, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed. 12 M&L for PCC in foundations, filling and mass-concrete type D-2 (1:4:8) using 40 mm gradedcrushed stone aggregate complete all as specified and directed. 13 M&L for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as inlandings, cover slabs (for manholes/septic tank etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:4) complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately). 14 M&L for cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25 complete all as specified. 15 M&L for25mm thick Cement concrete in sub base for receiving floor tiles and mass concrete using Type B-1,1:2:4 (using 20 mm graded crushed stone aggregate) complete all as specified and directed.Note:- Finishing surfaces of concrete to be even and rough to receive the topping layer or floor tiles etc 16 M&L for PCC 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) mixed with water proofing compound as per manufacturer’s instructions as in padding on roof, surface finished even and smooth without using extra cement all as specified and as directed.(Note:- WPC shall be measured and paid separately) 17 M&L liquid water proofing treatment to RCC roof slabin following procedure :(a) M&L forliquid water proofing treatment to RCC roof slab incl dismantling of existing water proofing treatment with existingAPP sheet ,plaster , mud fuskas,brick tiles etc of any description in following procedure:-(b) Prepare the surface by cleanining with concrete surface grinder/ wire brush and a high pressure water jet and ensure that it is free of dust, oil and loose particles. Damaged portions, hollow area must be repaired with epoxy mortar and repair cracks of old concrete by cutting V groove, corners and joints of drain pipes, channels etc. treated with epoxy mortar prepared with epoxy primer (as per manufacturers instructions).(c) Laying 10mm thick rendering in Cement mortar 1:3 with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of concreteroof surfaces, finished even and fair to receive treatment on roof Complete (d) Applying three coats of polyurea waterproofing coating as per manufacturers instructions for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx. 500% ± 50% and tensile strength at 14 days of 5MPa.(e)The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge / Consultant. (Note:- minimum 6 hrs interval between two coat shall be maintained)(f) All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system.Note:- (i) Work to be carried out by authorized applicator and as per manufacturer’s instructions.(ii) Providing test with filling of water for continuous 48 hours if there is any leakage than entire treatment will be done again by contractor without any additional cost.(iii) The rate includes for filling cracks in existing roof with epoxy cement mortar using suitable bonding agent before laying cement plaster. 18 Dismantlingfloor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed . 19 M&L for 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layerin cement mortar 1:6etc complete all as specified and directed.Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. 20 M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE 21 S&F joint free non skid coloured Ceramic tiles 07mm to 08mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. 22 S&F joint free non skid coloured Ceramic tiles 07-08 mm thick (square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. 23 S&F joint free non skid Ceramic tiles, coloured 7mm to 8mm thick (square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in vertical/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 10mm thick backing coat/redering in cement mortar 1:4 for fixing of tiles complete all as specified and as directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE 24 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.& Brushing neat cement slurry with 3.0kg of cement per sqmetrecomplete all as specified and directed. 25 M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE 26 Demolition of Roofs, floors (other than ground floors), beams staircases, landing, cooking platform ,chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed.Note:- Demolition will be done only by mechanical cutter only . 27 M&L for RCC type B-1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately). 28 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed 29 M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. 30 Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etcincluding necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed. 31 M&L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cementincluding necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.(Note:- WPC shall be measured and paid separately) 32 M&L for preparation of newly plastered external surfaces of wall andapplying Two or more coats of 100%Acrylic smooth exterior paint (Weather coat),Premium quality having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.79 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm(weather proof/weather coat) without any brush marks on the surface in any colour over and including 1 to1.5mm thick water proof cement based wall care putty and necessary scaffolding up to three storeys height of bldgs, Shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. 33 M&L for complete removal of existing treatment on external surfaces of wallandapplying Two or more coats of 100%Acrylic smooth exterior paint (Weather coat),Premium quality having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.79 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm(weather proof/weather coat) without any brush marks on the surface in any colour over and including 1 to1.5mm thick water proof cement based wall care putty and necessary scaffolding up to three storeys height of bldgs, Shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. 34 M&L for rendering 15 mm thick in cm 1:6 on other than fair faces of brick work , concrete surfaces of wall,finishing surfaces even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed. 35 M&L for preparation of newly plastered internally surfaces of wall and applying min 1.5 mm thick wall care putty on the surfaces & making the surface absolutely smooth surface and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgsif required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. 36 M&L for complete removal of existing treatment internally surface of wall and applying min 1.5 mmthick wall care putty on the surfaces and making surface absolutely smooth and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,complete all as specified and as directed. 37 M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed. 38 M&Lfor preparation of newly plastered surfaces of ceiling and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgsif required complete all as specified and as directed. 39 M&L for complete removal of existing treatment from ceiling surface and applying three coat of white wash on undecorated surfaces without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed. 40 M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed. 41 M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying three coat white wash evenly complete all as specified. 42 M&L for preparation of old painted steel and iron surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surface including necessary scaffoldingcomplete all as specified and as directed. 43 M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed. 44 M&L for writing letters or figures (block, Roman, Italic or Indian) exceeding 15 centimeter high but not exceeding 30 centimeter high etc with synthetic enamel paint including necessary scaffolding up to four storeys height of bldgsif requiredcomplete all as specified and as directed. 45 M&L for cutting down plants / trees of girth not exc 15 cm & surface are not exc 0.36 Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-O or cement mortar 1:2 complete all as per manufacturer instructions and as specified. NOTE: Any CI/GI/PVCpipes and fittings damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc ,hoisting, lowering and protective measures etc up to four storeys height of bldgs and removing of debris out of MoD land complete all as specified and as directed. 46 Supply only `Liquid Water Proofing Compound. complete all as specified and as directed . 47 Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the freme) complete all as specified and directed. 48 Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site. 49 Taking down shutters of any description exc 1 sqm but not exc 2 sqm eachand removingfrom site complete all as specified and directed. 50 Taking down shutters of any description exc 1 sqm and n exc 2 sqm and refixing in same opening after easing, adjusting and replacement of minor nails etc, complete all as specified and directed. 51 S&F pressed steel frames door 105 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plateincluding one shop coat of primer complete all as spd and directed 52 S&F pressed steel frames door 165 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plateincluding one shop coat of primer complete all as spd and directed 53 M&L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling ofhollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed. 54 S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, confirming to IS- 2202(Part-I-1999) , ISI Marked complete all as specified and directed 55 S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats Note:wire cloth shall be measured separately 56 S&Fstainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed. 57 M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. 58 M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paintall as specified. 59 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet ,reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. 60 S&FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet PVC ‘C’ channel having a plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 61 S&FSteel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill10 mm sq bar includingtwo coat of synthetic enamel paint overonecoat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast , includingplain/figured glass and wire mesh complete all as per details shown in drawing No CEPZ/TD-245/01 sheet No 1/1 and CEPZ/TD-246/01 sheet No 1/2 & 2/2including taking down existing spoiled and unserviceablewindows/ventilators of any type ( wooden/steel) complete all as specified and directed 62 M&Lfor 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white including 3mm thick lipping and equal to thickness of board as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. 63 S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. 64 S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed 65 S&F hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100complete all as specified and directed. 66 S&FContinuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed 67 S&F stainless steel butt hinges of size 100mmlong for fixing of pvc door shutter etc complete all as specified and directed. 68 S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed 69 S&F Aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed. 70 S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified. 71 S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed. 72 S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames.complete. 73 S&F in repair 25mm outer dia stainless steel decorative drapery rod ( Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets ( Model:- SS 25 BR, Vista) near to ends with stainless steel finials ( Model:- SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings) 74 S&F peg set of 4, brass chromium plated, fancy type, superior quality and fixed with screws complete all as specified and directed. 75 S&F brass door magic eye: as given specification material resin lens +zinc alloy,top diameter: 31.2mm, botom diameter approx 24mm, pipe diameter approx 16mm total length approx 50mm, inner height approx 36mm application 35 to 60mm thick viewing angle 200 degree of surrounding without opening the door unique design ultra clear view and superior finish, wide angle best in class lens for all round visibility the outsider cannot hide any ware, the back cover protects you from the outsider observing any movements inside easy to instal with inbuilt screw over a wide range of door thickness from 35 mm to 60mm etc requiredat site complete as directed by Engr-in-charge 76 Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. 77 S&F 15mm bore Steel water tubing medium grade, galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. 78 Fixing only 15mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings) 79 Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. 80 S&F 20mm bore Steel water tubing medium grade, galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. 81 Fixing only 20mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings) 82 Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed. 83 S&F in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe 84 S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe 85 S&FRotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity white in colourISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) including Dismantling of old brocken water tanks, outlet & over flow pipe including tank nipple etc complete all as specified and as directed. 86 S&F in repair 15 mm borelong body CP Bib taps castcopper alloy fancy type with capstan heads (chromium plated),and cupscrewed down , high pressure for iron pipe mpete all as spd & directed. 87 S&F in repair 15 mm bore Stop valves, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and as directed. 88 S&F in repair stop valves (ISI marked),15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup (concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. 89 S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot or `Cold with long screwed shankS&Fly-nuts, screwed for iron pipe complete all as specified and directed. 90 S&F in repairs Brass CP shower rose 125mm size including fixing to steel pipe or unioncomplete all as specified and directed. 91 S&Fin CP brass towel ring 20mm dia, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed. Make : ACN-CHR-1121BN of JAQUAR or equivalent in any of the make mentioned in list of products. 92 S&Fin Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia D type Brass Chromium plated inclbrackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. 93 S&F in repair PVC Coloured bathroom cabinet looking mirror divided into shelf overall size 622mm x 432mm complete all as specified and as directed by Engr-in-Charge. Make: Nilkamal/ Prayag/ Polytuf 94 S&Fin repair 5mm thick looking mirror of size 600x450mmof selected quality glass mounted on 6mm thick AC building board or commercial plywood and aluminium angle beading around mirrior fixed onwall PVC plug and screwsetc complete allas specified and directed 95 S&F in repair soap dish of stainless steel fixed to wall with aluminium screw,complete all as specified and directed. Make Jaquar CAT No. ACN-CHR-1131N or equivalent in any of the make metnioned in list of product. 96 S&Finin repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm longfixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. 97 S&F in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed by Engineer-in-charge Make : ACN-CHR-1173 of JAQUAR or equivalent in any of the make mentioned in list of products. 98 S&F in repair viterous China squatting pan, `Orrisa pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed. 99 S&Fin repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed. 100 S&Fin repairs Viterous China wash basin, white, flat back, size 550x400mmexcluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but including waste coupling of fixing of supply and waste pipe complete all as specfied and as directed. 101 S&F in repair sink made of stainless steel 1 mm thick kitchen or laboratory sink with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 495 mm x420 mmand bowl size 410mmx330mmx 160mm including 40mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed. 102 S&F in repair32/40 mm bore PVC waste pipe flexible with minimum length 800mm complete all as specified and directed. 103 S&F in repairStainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed. 104 S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both endsscrewed both endfor iron pipes. 105 Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 150MM/200mm 106 S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. 107 S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. 108 Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipeincluding all fittings ,heads shoes, bends etc including removal to store ,Internal dia of pipe in 75MM/110mm complete all as specified and directed.all as specified and directed. 109 S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed. 110 S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.(ISI MARKED) 111 S&F PVC (SWR) bends any radius 75mm dia all as specified and directed.(ISI MARKED) 112 S&F PVC (SWR) Single T any radius 110mm dia all as specified and directed.(ISI MARKED) 113 S&F PVC (SWR) SingleTradius 75mm dia all as specified and directed.(ISI MARKED) 114 S&F PVC (SWR) bends any radius 110mm dia all as specified and directed.(ISI MARKED) 115 S&F in repairs 75mm PVC floor trap, ISI marked withcp grating with/without waste pipe hole incl jointing to waste pipe fixed with solventcement complete all as specified and as directed. 116 Removing of iron gate and re fixing of gate and including increase height of gate with hold fast as directed by Engr-in-charge. 117 Cutting holes in brick wallsbuilt in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required,Depth of embedded portion of holddfasts or lugs measured from the face of the jamb into the wall exc Half brick but not exc one brick complete all as specified and directed. 118 M&L for framed work as in door or gates of angle or other section complete drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging with and including hooks or hinges and hanging also fastening and fixing complete all as specified and directed 119 S&F mild steel plain black sheet 1.00mm thick as in covering to doors shutters etc cut to size edges beaded holes punched, including rounded scraws or rrivets and fixed to wooden steel memberes etc with plain 40mm lap joints or walds/reavated inlcluding b 120 Cutting channels, grooves or rebates in brick/concrete wall n. exc 15 cm girth, and trimming surface complete all as specified and directed 121 Cutting holes into or through brick walls/stone walls built in cement mortar; superficial area exc 150 Sqcm but n. exc 400 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required brick/concrete wall n. exc 15 cm girth, and trimming surface complete all as specified and directed 122 M&L for plaincement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. 123 M&L for post construction ATT treatment to points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and directed 124 M&L for providing and injecting chemical emulsion for post constructional anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling 12mmdia upto 300mm deep and 300mm centre to centre and plugging holes etc in apron /plinth protection allas specified in IS Code 6313 Part-3:2001 and as directed. 125 M&L for post construction ATT treatmentof soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors all as specified and directed 126 Excavating in post holes (or similar holes) each n exc 0.5 cu. m,etting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,soft/loose soil. 127 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. 128 S&F mild roof structural steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlines and fastening including distance pieces etc. complete all as specified and directed. 129 M&L for PCC in foundations, filling and mass-concrete type C-2 (1:3:6) using 40 mm gradedcrushed stone aggregate for post complete all as specified and directed. 130 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose of soil. Note:-(1) The excavation work will be carried out by mannualy or mechanical meansin any location/ areaas directed by engr-in- charge. (2) Any dammage occur to water supply pipe line/ electric cable/existing drain/sewage line during excavation workwill be make good up to satisfaction of Engr- in-charge. 131 All as per item No 130 here-in-before but depth exc 1.50 m but n. exc 3.00 m 132 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with any type of soilcomplete all as specified anddirected. 133 Removing excavated Soils material exc. 250m but n exc. 500 m and depositing where directed 134 M&L for 150mm Reinforced concrete pipes, class NP-3, laid and jointed complete with collarsthickincluding demolition and breaking up drain pipes in cement mortar including demolition of PCC bedding and hunching complete all as specified and directed 135 M&L Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate for Bore of pipe in 150mm complete all as specified and directed 136 M&L for 200mm Reinforced concrete pipes, class NP-3, laid and jointed complete with collarsthickincluding demolition and breaking up drain pipes in cement mortar including demolition of PCC bedding and hunching complete all as specified and directed 137 M&L Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate for Bore of pipe in 200mm complete all as specified and directed 138 M&LPCC 1:2:4 type B-1 (using 20mmgraded aggr) as insurface channels & drains,benching of manholes complete allas spd and directed. 139 Sch A Part-I E/M Portion:-Taking down old unserviceablecopper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators andsocketsby unscrewing carefully from boards etcand making good disturbed surfaces of walls, as per existing finishescomplete all as spd and directed. 140 M&L for point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H 1100 volte grade cable, withand including PVC rigid concealed conduit (ISI marked) with all fittings including sheet steel/CI terminal box of adequate size including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable as earth continuity conductor connected to comman earth dolly, complete all as specified and directed.Note:- 1. connection of cable with MCBs/switch sockets shall be done through proper size copper /brass thimbles.2.Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible. 3.Proper colour coud will be used for wiring as per the electrical rule and as directed. 141 All as per Srl item No 140 here-in-before but for 5 pin 5 amps socket outlet on the independent board controlled by one switch SP, one way 5 Amp, 240 Volts. complete all as specified and directed. 142 All as per Srl item No 140 here-in-before but for 5 pin 5 amps socket outlet on the sameboard with other switch complete all as specified and directed. 143 All as per Srl item No 140 here-in-before but for call bell point complete all as specified and directed. 144 M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable with in and including PVC concealed conduit heavy duty with all fittings including anodise pressed steel sunken box with bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface tomatch with the existingsurface complete all as specified and directed. 145 S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed. 146 S&F switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge.. 147 S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed. 148 S&F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed. 149 S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed. 150 S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specifiedand directed. 151 S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed. 152 S&F ceiling fanregulator electronicsocket type 5 stage speed variation ISI marked complete all as specifiedanddirected. 153 S&F Bell AC, 230 Volts, single pole complete all as specifiedanddirected. 154 S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed. 155 S&F in replacement CFLs with LEDLamp, B22type ,14 watt,complete all as specified and directed. 156 S&F in replacement energy saving decorative LED boxtype 20 W, 6500K,cool white, Lumen efficiency 110 lumen/watt, light fitting PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and making connections with twisted flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge. 157 S&F energy saving , surface mounted, bulk head luminaire 10 watt with PDC aluminium housing and polycorbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible suitable size copper conductor cable complete all as specified and directed by Engr-in-Charge. 158 Taking down carefully ceiling fan from the hook including dismantling the blades and minor repair such as replacement of locking pin, reel insulators, bolts, nuts etc and painting one coat of synthetic enamel paint of existing colour including rehanging the same at existing position after cleaning, greasing and connecting up with PVC insulated copper flexiblewire of suitable size from ceiling rose to connector of fan complete all as specified and directed by Engr-in-Charge . 159 M&L for providing/ cutting the round/ square hole of required size in wall finishing thedistrubed surfaces as per existing finishes complete all as spd and S&Fing MS ventilating fansSingle phase, 230 volts 225 mm or 9” H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable suitable size from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. 160 M&L for providing/ cutting the round/ square hole of required size in wall finishing thedistrubed surfaces as per existing finishes complete all as spd and S&Fing MS ventilating fansSingle phase, 230 volts 300 mm or 12” H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated copper cable suitable size from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. 161 S&F and testing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connecting with flexible copper conductor of suitable size, 3 core and including writing of MES No with black paint complete all as specified and as directed. 162 S&F in repair sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed. 163 S&F in repair MCB SP 240 volts any rating from 6 to 40 amps, B cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. 164 S&F in repair MCB SPN 240 volts any rating from 6 to 40 amps,B cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. 165 S&F inreplacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps C curve complete all as specified and directed . 166 S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS-H flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS-H flexible copper conductor cable of size 6 sqmm(green colour)as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete andmaking good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed. 167 S & F in replacement of old unsvsheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprisingthree phase four wire copper strip bus bar of appropriate capacitycomplete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 63 AMPS AC415 VOLTS16 KA=01 NOas incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note :-(i) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(ii)connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped.(iii)all the vacant holes of the DB shall be provided with blank plates of appropriate size. (iv) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (v)MCCBs andMCBs should have a same make as of DB. 168 S&F in repair bldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length not less than 0.9 mtr fixing with clamp etc and making connections using suitable size copper cable from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. 169 M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)withtop edge of the platenot less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precastPCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth workin any type of soil , removal of surplus soil to a distancen.exc 50m and connecting , testing on completion completeall as shown on electricplate No 05 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted). 170 Taking down single phase electric meter by disconnecting existing electric connection and re-fixing of the same electric meter at new location as directed by Engg-in-charge including connection with 3 core 4 Sqmm copper wire from DB to meter complete all as specified and as directed. 171 Supply, laying and testing in replacement LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 4 core complete all as specified 172 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed. 173 Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified. 174 Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 175 M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified(Note:-Punned thickness shall be measured and paid) 176 M&L for brick covering equal to length of bricks as mechanical protection to cable with well burnet sub class ‘B’ bricks laid as directed by the Engr-in-Charge. 177 S&F GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall/Pole including fittings /clamp complete all as specified and directed.
Contract Date: Mar 10, 2026 Contract Value : 21.61 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
27.
Defence #9749237 AOC
Repairs To B R Works In Mes Installation At Lrde Cair And Mes Complex Under Age B R I Of Ge I R And D West Bengaluru=1.00 Demolition of brick work or stone/ boulder masonry, PCC block masonry built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100metre and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100metre, complete all as specified and directed. 2.00 Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land, complete all as specified and directed. 3.00 Demolition of PCC (unreinforced) of any description & in any position not otherwise specifically provided, complete all as specified and directed. 4.00 Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100metre and disposal of unserviceable materials, debris and rubbish to outside MD land, complete all as specified and directed. 5.00 Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 kilometre out side MD land, complete all as specified and directed. 6.00 Taking down chowkat or frames with shutters (with out taking off syhutters from the frame) n. exc 1.50 sqm each and removing from site, complete all as specified and directed. 7.00 Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to and from store etc, complete all as specified and directed. 8.00 Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. 9.00 Dismantling structural steel work including doors, gates but excluding framed truss etc.,complete all as specified and directed. 10.00 Dismantling of fencing wire mesh, any type, complete all as specified and directed. 11.00 Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed. 12.00 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. 13.00 Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removal of debris outside MD land etc., complete all as specified and directed. 14.00 Dismantling plain corrugated steel sheeting any gauage thick ness including Nainital and similar pattern, complete all as specifed and directed. 15.00 M&Lfor Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. 16.00 M&L for PCC 1:4:8 type D-2 (Using 40 mm graded stone aggregates)as in foundation filling and mass concrete,sub base etc, complete all as specifed and directed. 17.00 M&L for 100mm thick PCC 1:2:4 type B1(using 20mm graded stone aggregate) as in flooring/ hardstanding etc finished surfaces even and smooth without using extra cement etc, complete all as specified and directed. 18.00 M&L for providing 75 mm thick cement concrete in 1:3:6 type C-1,(using 20 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection, complete all as specified and directed. 19.00 M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish, complete all as specifed and directed. 20.00 M&L for Non - Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in CM(1:4), complete all as specified and directed. 21.00 M&L for Non Skid coloured ceramic coloured tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:4), complete all as specified and directed. 22.00 M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/ 450 x 350 x 7mm to 8mm in vertical surface as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with colour of tiles over and including 10 mm thick rendering in cement motor 1:4, complete all as specified and directed. 23.00 M&L for glazed ceramic coloured tiles vertical surface of size 200 x 300 x 7mm thick set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with colour of tiles over and including 10 mm thick rendering in cement motor 1:4, complete all as specified and directed. 24.00 M&L for 18-20mm thick granite slab on steps, jambs, pillars, window-cills, cooking platforms including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM 1:4. including grinding and polishing, complete all as specified and directed. 25.00 M&L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment including 15mm thick Screed bed or bedding layer of cement mortar 1:4 for laying floor finishes, complete all as specified and directed. 26.00 M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finish the surface even and smooth including mixing of WPC, complete all as specified and as directed.Note: WPC shall be measured and paid seperately 27.00 M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work etc., complete all as specified and directed. 28.00 M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. 29.00 M&L for Rendering 5mm thick in CM 1:3 in ceiling on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. 30.00 Supplying only liquid water proofing compound, complete all as specified and directed. 31.00 M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer including necessary scaffholding, complete all as specified and directed. 32.00 M&L for 1mm thick wall care putty on wall, complete all as specified and directed. 33.00 M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer including necessary scaffholding complete all as specified and directed. 34.00 M&L for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper on wall including necessary scaffholding complete all as specified and directed. 35.00 M&L for preparation of old surfaces and applying one coat of cement based paint on wall including necessary scaffolding complete all as specified and directed. 36.00 M&L for preparation of new plastered surfaces of ceiling and applying three coats of White wash in including necessary scaffholding complete all as specified and directed. 37.00 M&L for preparation of old plastered surfaces of ceiling and applying two coats of White wash including necessary scaffholding complete all as specified and directed. 38.00 M&L for preparation of old surface of any description over 10 cm width or grith not otherwise described and applying two coats of Chlorinated rubber paint over a coat of chlorinated high build MIO paint using cradle system at high towers adhering all safety measures complete as specified and directed. 39.00 M&L for preparation of old surface of any description over 10 cm width or grith not otherwise described and applying two coats of Chlorinated rubber paint over a coat of chlorinated high build MIO paint adhering all safety measures complete as specified and directed. NOTE:- Quoted rates shall deemed to be inclusive of the cost of scaffholding required for painting. 40.00 S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 41.00 S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening complete all as specified and directed . 42.00 S&F for factory made solid PVC door shutter 30mm thick (style) considering of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheets for top rails and bottom rail on side and on gap insert for top rail and bottom rail panelling of plain colour PVC shutter to be fitted in MS frame welded/sealed to the stile, rails with suitable PVC sheet beading and jointed to gether with solvent cement complete all as specified and directed. 43.00 S&F for mild steel butt hinges medium weight of size 100 mm complete all as specified and directed. 44.00 S&F for Aluminium anodised barrel tower bolts of extruded section, 150 mm long all specified and directed. 45.00 S&F for Aluminium anodised cast type handles 150mm long all as specified and directed. 46.00 S&F for aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and directed. 47.00 S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed. 48.00 S&F Mild steel plates, Fe 410-W (Gde-E-250) quality plain or chequered, 5mm thick or over in thickness in available sizes etc complete all as specified and directed. 49.00 S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe 410 -W (Gde- E- 250) quality- A-complete all as specified and directed. 50.00 S&F for Steel work in tubular trusses,frame work,grills etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc complete all as specified and directed. 51.00 S&F for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed. 52.00 Supply only Chain link MS galvanised fencing any size or type (The max. size of mesh does not exc 100mm x 100mm and dia of wire n.exc 3.15mm.) complete all as specified and directed. 53.00 Fixing only Chain link fencing including line wires,any mesh, size and type to any standards,rails straining bolts, etc. including provision of binding wire complete all as specified and directed. 54.00 S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 55.00 M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 etc complete all as specified and directed.Note : Reinforcement shall be measured and paid separately. 56.00 M&L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality etc complete all as specified and directed. 57.00 S&F for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. 58.00 S&F for 1.25mm thick Rolling shutterSteel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. 59.00 M&L for preparation of new steel surface of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer. 60.00 M&L for preparation of old steel surface of any description, over 10cm in width or girth not otherwise described and applying one coats of synthetic enamel paint . 61.00 M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed. 62.00 M&L for preparation of old painted wood Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary paint) complete all as specified and directed. 63.00 S&F for powder coated aluminium frame and shutters for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 64.00 M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters / aluminium partions etc..complete all as specified and directed. 65.00 S&F for 4.8 mm thick sheet glass ordinary quality fixed in aluminium framenot exc 0.50 Sqm each in each pane complete all as specified and directed. 66.00 Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and directed. 67.00 S&F in repairs for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. 68.00 S&F in repairs for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. 69.00 S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed. 70.00 S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white complete all as specified and directed. 71.00 S&F in repairs Vitreous China squatting pan of orissa pattern size 580mm 440 mm white with `P or `S trap, front or back inlet & integrated foot rests, including provision of cement concrete bedding complete all as specified and directed. 72.00 S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) etc complete all as specified and directed. 73.00 S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed. 74.00 S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed. 75.00 S&F in repairs CP Bib taps fancy type 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. 76.00 S&F in repair Stop valves/Angle cock 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. 77.00 S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot or `Cold with long screwed shanks & fly-nuts, screwed for iron pipe etc complete all as specified and directed. 78.00 S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. 79.00 S&F for 15 mm bore Urinal spreader , cast copper alloy with crtuch screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 80.00 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers complete all as specified and directed. 81.00 S&F for 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and directed. 82.00 S&F for rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 500 Ltrs capacity including taking down old one including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 210 gms) complete all as specified and directed. 83.00 S&F for rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 1000 Ltrs capacity including taking down old one including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 210 gms) complete all as specified and directed. 84.00 S&F for 75 mm dia bore uPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and directed. 85.00 S&F for 110 mm dia bore uPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and directed. 86.00 S&F for uPVC (SWR) bends any radius 75 mm dia of bore,all as specified and directed. 87.00 S&F for uPVC (SWR) bends any radius 110 mm dia of bore, all as specified and directed. 88.00 S&F for 75mm dia outlet PVC multi floor trap with grating including dismantling the damaged trap all as specified and directed. 89.00 Cutting of tree branches of girth not less 10 cm falling over the building roof top upto a height of 15m from ground floor and cleaning the roof surface viz., leaves, tree branches etc incl removing of branches, leaves out of MD land all as specified and as directed by Engr-in-charge. 90.00 Cleaning of foliage on accessible / non accessible upto six storeyed roof top, mud cakes, rain water pipe outlets to ensure to pass the water through RWP with out any stagnation, etc including proper arrangement of ladder, scaffolding if required and cleaning with water and removal of debris out of MD land complete all as specified and directed by Engr-in-charge. 91.00 Supply only aggregate of broken stone boulders for loose filling of gauge 40mm to 80mm etc, complete all as specified and directed.
Contract Date: Mar 05, 2026 Contract Value : 24.77 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
28.
Defence #9699170 AOC
Tender For Special Repairs To Bldg No P-16, P-17 And P-199 At Pao Quarters, S Of A, Under Ge Devlali; 1 Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. 2 M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. 3 All as per item No.02 above but except burnt bricks. 4 Taking down cement plaster any description on brick or stone cement concrete surfeaces/walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. 5 M & L 10 mm thick rendering in cement mortar 1:6 on brick work or stone masonry/concrete /RCC surfaces rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. 6 M&L for 1.5mm thick wall care putty on wall complete all as specified and as directed incl sanding rubbing for smoothness of surfaces. 7 M&L for rendering 15mm thick in cement mortar 1:4on brick work or stone masonry/concrete /RCC surfaces rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. 8 M&L for rendering 5mm thick in cement mortor 1 :3 as in ceilingplaster on concrete surfaces,rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. complete all as specified and as directed. 9 M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. 10 M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed. 11 M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distemper over a coat of interior wall primer complete all as specified and directed. 12 Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. 13 M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 600X7 to 8 mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to matchetc complete all as directed and specified. 14 M&L Vitrified tiles 8- 9 mm thick (square/rectangular) polished, area of each tilesexceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors including screed bed 15mm thick in cement mortar 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 15 All as per Sl item No 14 above but in skirting over 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed. 16 M&L for non skidjoint free ceramic tiles (of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.18 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. 17 M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing completeincluding screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed. 18 All as per item No 17 above,but as in skirtingover 10mm thick backing coat in CM (1:4). 19 M&L machine cut cudappa stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. 20 M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed. 21 M&L for Machine cut kota stone slab on steps as inriser/tradein single piece of any size 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed. 22 M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed by Engineer-in-charge. 23 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. 24 M&L for chequered cement concrete tiles 30cm x30cmx 20mm thick Rubber moulded with grey cementandpigment, over and including 15mm thick screed in cement mortar (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. 25 M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. 26 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. 27 M&L for 30mm thick PCC (1:2:4) Type B1 with 20mm graded stone aggregate as in levelling course as in floor complete all as specified and as directed. 28 M&L for cement concrete (1:4:8) type D 2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. 29 M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and and corner finished even and fair and laid in alternate bays complete all as specified and directed. 30 Taking down carefully existingunserviceable bitumen felt/ APP membrane including plaster (any number of layers ofanythickness) etc and removing of the rubbish to a distance not exceeding500m from the building and depositing where directed complete all as spd and directed. 31 M&L for rendering 10 mm thick cementplaster in cement mortar 1:4 on RCC/concreteroof/terrace surfaces mixed with water proofing liquid complete all as specified and as directed. Note: Water Proofing liquid shall be measured and paid separately. 32 M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions, padding concrete below roof treatment etcslightly rounded or chamfered on edges wherever required includingnecessary form work/moulds etcincluding applying cement slurry on surface area @2.50 Kg/Sqm completeall as specified andas directed . 33 M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :-i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sqm.ii) Providing and laying3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturers.iii)Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturers instructions and as directed . 34 Demolition of RCC cement concrete (reinforced) in roofs, floors(other than ground floors), beams staircases, landing, chajjas, and similar suspended work. 35 M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas. 36 Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete 37 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. 38 All as per item No. 37 above but 6mm to 8mm dia. 39 Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed. 40 Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed. 41 S&F for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeMake : ECHON/Sintex/Rajshree/Navaratan Note : Rate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . 42 S&F for 35mm thickfactory made flush door shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. 43 S&F 2nd class H.W. glazed & skeletonshutter 35mm thick factory madeopen rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed. 44 Supply for Pipe Supporting Clamping - Single Pipe of PVC dia 75 mm (3) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance100 mm (4):Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 100 mm (4) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Continuous Slotted C Channel with ribs to be used of size 250 mm (10) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm.(Contd/...) 45 Item No 44 Contd/...3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3) - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10) - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3)PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2) - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make: Shaivi or equivalent as approved by GE. 46 Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed 47 M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 48 M&L for preparation of new untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 49 S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be pincl in quoted rate).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/NavaratanRate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . 50 S&F 30 mm thick moulded Prelaminatedboth side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on front side with wood grain texture on front and plain on back side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) . 51 M & Lfor fabrication & fixing tohorizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc forModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved qualityincluding paste to all exposed edge byedge Binding Tape to match the colour of boardincluding provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) 52 M & Lfor Fabrication & fixing to front side /all exposed sides ofModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR UV, glossy/maat finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) 53 S&F powder coated sliding window, three trackshutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass of 4mm thick black tinted and stainless steel wire loth 0.36mm nominal dia of wire andaverage width of aperature 1.40mm, size ofside rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37complete all as specified and as directed. 54 S&F for powder coated aluminium ventilator shutters with frame not less than 0.55Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frostedglass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. 55 S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0all as specified and as directed. 56 S&F stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed. 57 S&F hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size. 58 S&F for door/shutter ball catches with 8 mm dia steel ball and brass body and striking plate incl magnetic with striking plate for WPCcabinets, cupboard shutters complete all as specified. 59 S&F 100mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed. 60 S&F 140 mm aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and as directed. 61 S&F 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed. 62 S&F continuous (piano) hinges, stainlesssteel, bright finishedwith 30 mm flaps handle complete all as specified and as directed. 63 S&F 150mm size aluminium anodized handle complete all as specified and as directed. 64 M&L for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. 65 S&F in repair 25 mm dia and 1 to 1.50 mm thick stainless steel curtain rodincluding stainless steel brackets, stops, end knobs/ side globe, wall to wall bracket ect. complete all as specified and directed by Engr-in-charge. 66 S&F in repair PVC cabinet 450x600mm overall size with looking mirror of selected qality 5mm thick glass mounted over PVC framingcomplete all as specified of Make Prayag/Polytuf/Somany 67 Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. 68 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. 69 S&F in repairs stainless steel plate rackof size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified. 70 S&F in repairs glazed earthen ware viterous china wash down water closet (pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etccomplete all as directed. Make somany Cat Part No. SMART EWC P or Equivelent in Cera/Hindware/Parryware. 71 S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete asfixed complete all as specified. 72 S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings, 32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed. 73 S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca 74 S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part NoFLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca 75 S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.. 76 S&Fin repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca 77 S & F in repair CP, soap dishcomplete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca 78 S&F in repair fancy type Toilet paper holder, steel chromium plated approximate size 140X140X50mm complete all as specified and as directed. 79 S&F in repair Overhead Shower 120mm round shape, Single Flow (Face Plate Stainless Steel and ABS body with Chrome Finish) with Rubit Cleaning System including shower arm of size 190mm long flat shape for wall mounted shower with flenge complete all as specified and directed. Make Jaquar Cat Part No. OHS-1663 & SHA483 or equivalent in kohar, grohe and Roca. 80 S&F sheet glass corner wall mounted shelf assembly consisting of 8mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. 81 S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. 82 S&F in repairs 15mm bore CP Sink mixer with regular swinging spout (Wall mounted model) with connecting legs and wall flenge complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5309N or equivalent in kohar, grohe and Roca. 83 S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12or equivalent in kohlar, grohe and Roca. 84 S&F in repair 15mm dia brass chromium plated two waybib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR 5041 Nor equivalent in kohlar, grohe and Roca . 85 S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. 86 Dismantling/Disconnectingof water tanks (RCC hume Pipe/PVC)including disconnecting all connections etc 1000 ltrs capacity. complete for following capacity of tanks . 87 Refixing the old rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks. 88 S&Fnew rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks. 89 Dismantling/Disconnecting of water tanks (RCC hume Pipe/PVC)including disconnecting all connections exc 250 and n exc 500 ltrs capacity. complete for following capacity of tanks . 90 S&Fnew rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks 91 S & F 16mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) 92 S & F 25mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) 93 Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. 94 Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. 95 Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. 96 S&F in repairs 25mm bore CPVC gate valves screwd both ends for CPVC pipescomplete all as specified and directed. 97 Taking down of PVC Pipes with fittings upto 75mm to 110mm dia/eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc.,complete all as specified and as directed. 98 S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall with clamp complete all as specified and as directed. 99 All as per item No 97 but except pipe complete all as specified and directed. 100 S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall with clamp complete all as specified and as directed. 101 All as per item No 99 but except pipe complete all as specified and directed 102 S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. 103 S&F PVC (SWR) bend any radius 110mmcomplete all as specified and directed. 104 S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. 105 S&F PVC (SWR) bendany radius 75mm complete all as specified and directed. 106 S&F forn110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 107 S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 108 S&F 110 mm PVC (SWR) junction single T equal or unequal complete all asspecified and directed . 109 S&F 75 mm PVC (SWR) junction single T equal or unequal complete all asspecified and directed . 110 S&F 75 mm PVC (SWR) vent cowl complete all asspecified and directed . 111 S&F 100 mm PVC (SWR) vent cowl complete all asspecified and directed . 112 S&F in repairs 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. 113 Complete removal of existing treatment and applying three coats of white wash on surfaces of ceiling, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed. 114 Complete removal of existing treatment and applying two coats of white wash on surfaces of walls, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed. 115 Complete removal of existing treatment and applying two coats of oil emulsion distempering over a coat of interior wall primer over 1.5mm thick wall care putty, including removal of unnecessary nails and filling of holes/cracks by crack filler on surfaces of walls, complete all as specified and directed. 116 M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately). 117 S & F and Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using aluminium U channel of size 15 mm x 15 mm and 1.40 mm thick and fixed on wall , with screw to the under layer , repair to the edges of panels and finishing the aluminium U channel while cement is green complete all as per specifications and direction of the Engineer-in-charge. 118 Supply for Pipe Supporting Clamping - Single Pipe of dia 20 mm (3/4) down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt Rubber Sleeve mounted system running vertically with wall distance 100 mm (4):Pipe Support Clamping made of: 1. Mono Bracket for 20 mm (3/4) pipe having Wall Distance 100 mm (4) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs.2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 20 mm (3/4) pipe, Wall distance 75 mm (3) - 1 Nos. 2. U Bol Rubber Sleeve mounted for 20 mm (3/4) GI / UPVC/ CPVC pipe Dia. - 1 nos and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2) - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make : Shaivi or equivalent as approved by GE. 119 Supply of Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt System for Five Pipelines (110mm + 75mm + 25mm + 20mm + 15mm) running Vertical Fixed line with wall distance 4 (100 mm):Pipe Support Clamping made of:1. Profile Bracket Wall Distance 100 mm (4) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Slotted C Channel B3 Type to be used of size 712mm (28) (Continuous Slotted C Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. (Contd/...) 120 Item No 118 Contd/...3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 Hotdip Galvanizing: As per x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated.Material Grade: IS 1079 used as per MTC IS 2629 (1985)-610 grams/m2 (>85 microns). confirms to EN 10204 3.1.Material Quantity for one unit: 1. Profile Bracket of Wall distance 3 (75 mm)-2 Nos. 2. Slotted C Channel of Size 28(712mm) - 1 No.; 3. U Bolt Rubber mounted for 4 (110 mm) Pvc pipe Dia. -1 nos. ; 4. U Bolt Rubber mounted for 3/4 (20mm) Pvc Pipe Dia -1 nos.; U Bolt Rubber mounted for 1/2(15mm) Pvc Pipe Dia -1 nos.; U Bolt Rubber mounted for 3(75mm) Pvc Pipe Dia -1 nos. ; U Bolt Rubber mounted for 1(25mm) Pvc Pipe Dia -1 nos. ;5. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2) Zn coated-4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make: Shaivi or equivalent as approved by GE. 121 Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika 122 M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap of PVC SWR 100 mm boreand applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat@1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed withWPC Conplast - 421, area offloor/kitchen/toilet/bathupto 3..00 Sqm complete all as specified and as directed. 123 S&F LDPE pipe 40mmbore fixed to wall/ceiling with bends/elbow complete all as specified. 124 S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed. 125 M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to 150mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe including demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement concrete mortar complete all as specified and as directed. 126 M&L for 150 mm bore PVC SWR drain pipe laid in floor or in trenches incl connecting with solvent cement and jointing complete with socket , complete all as specified and as directed. 127 M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly)all as specified and directed. 128 Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil. 129 Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm. 130 Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. 131 S&F Stainless steel Z type hinges 75 mm longmedium weight fixed with SS star headed screw complete all as spd and directed as in Kitchen cabinet cupboardshutters all as spd and directed. 132 S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele 133 S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele 134 S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.Make :Hettich, Hafele, Butterfly 135 S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly 136 S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer-in–charge. Make :Hettich, Hafele, Butterfly 137 S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make : Hettich, Hafele, Butterfly 138 S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304with necessary slidingchannel frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in - charge. Make : Hettich, Hafele, Butterfly 139 Supply chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding channel frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.” Make : Hettich, Hafele, Butterfly 140 S&F in repairs 15mm bore CP central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm Cartridge size complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5167NB or equivalent in kohar, grohe and Roca. 141 S&F 100 mm long extruded brass handles, fabricated type polished for modular kitchen as specified and directed. 142 Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. 143 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steelsheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screwscomplete all as specified and as directed. 144 S&F Pre-painted galvalume aluminium zinc coating GI based plain steelsheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screwscomplete all as specified and as directed. 145 S&F steel work (tubular/hollow) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed. 146 M&L for providing and fixing in repair Stainless steel (Grade 304)railing made of hollow tubes, channels, plates etc. , including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemnet and its components including levelling, grouting, providing holes as required for services etc. complete all as specified and direction of Engineer-in-Charge. 147 S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India 148 S&F 4.80 mm thick black tinted glassof any size in each pane complete all as specified and directed 149 Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. 150 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth 151 M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cableand one single core 1.5 sqmmsizecopper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters etc.fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-(a) 152 One light point/ exhaust fan point controlled by one switch 153 One fan point controlled by one switch 154 One 5 pin socket outlet. 5 Amps on the same board. 155 One 5 pin socket outlet. 5 Amps on the independent. board 156 One bell/ buzzer point controlled by one push button 157 One light point controlled by two two way switches. 158 All as per item No- 149 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire. 159 Supply and fix switch piano modularsingle pole one way 6 Amps one module complete all as specied . 160 Supply and fix switch piano modularsingle pole one way 16 Amps one module complete all as specied . 161 Supply and fix Modular switch 2 way 6A, 1 modulee complete all as specied . 162 Supply and fix Modular Bell push 6A 1 module complete all as specified . 163 Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed. 164 Supply and fixmodular socket outlet6A - 2/3 pin combined 2 module (multi purpose ) complete all as specified and as directed. 165 Supply and fix modular socket outlet6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed. 166 Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed. 167 S & F in replacement oflampangle/batten holderBakelite complete all as specified and as directed. 168 S & F Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.. Make Havels, model- LHDL06160099 (CITY 3) 169 S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCAsheet with snap on installer sutable fordouble side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model-Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj 170 S &F New E-Lite LED Pride Plus Neo. Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack With 10watt LED tube 171 Supply and fix fan step regulator, 120W - 2 module for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc completeall as specified and as directed. 172 Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed of 12 Ways 173 Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed of 4 Ways 174 Supply and fix in replacement MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed. 175 Supply and fix in replacement MCB SPN32Amps, 240 volts complete all as specified and as directed. 176 Supply and fix MCB SPN 40 Amps, 240 volts complete all as specified and as directed. 177 M & L sub main wiring with 2 single core, 10 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRcable 1100 Volts grade incl 10 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSas continuous earth wire and connecting to common earth terminals completeall as specified and directed in PVC conduitsNote :-(i) Two run of copper cable and one run of earth wire and PVC conduit shall be measured as one length. 178 Ditto all as per item No - 169 above but with 2 runs of 4 Sqmm cable with one run of 4.0 Sqmm cable for earthing. 179 S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed. 180 Supply,install, testing & commissioning of factory made LT panel wall mounted board made outof CRCA sheet 2 mm thick indoor type toltally enclosed weather,dust and vermin proof compartment type with front hinged door and locking arrengement mounted on M S flat iron clamp welded to panel body duly grouted on wall 415 V, 3 phase, 4 wire AC, 50 Hz having aluminium bus bar 160 Amps for pfase-03 Nos & neutral- 01 No with 02 Nos Earth Terminals. insulated with PVC sleeves, space for fixing single phse KWH Emergy meter 04 Nos 40x40x6 mm size angle iron hold fast, fastener bolts, copper lugs, spacers channels,rubber gaskets, locking knob, hylem sheet piece,PVC shrinkable sleeves, nut and bolts, washers etc suitable single core copper wire connectors, suitable compartments and epoxy power spray paint with primer complete all as specified including the following accessoriesincluding taking down old unservicable LT panel boardINCOMING- a) MCCB 415 V 4 POLE 25 KA breaking capacity of 63 Amps- 01 No b) R-Y-B phase LED indicating lamp-03 NosOUTGOING-a) MCB SPN 40 Amps, 230V, 10 KA, C curve - 05 Nosb) Providing space for and refixing existing single phase KWHelectric enery meter-04 Nos c) Copper wire 10 Sqmm wire and open terminals for all meters totaly pre wired. d) Glass windows for all meter for taking meter readingNote:-1. Cost of taking down electric meters from old unserviceable penel board keeping in safe custody, and refixing the same electric meters in new panel is deemed to be includede in rate quoted. 181 Taking down old unserviceable Exhaust fans, depositing to AGE E/M store & Supply and fix new exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm. (cutting hole in wall for instalation of exhaust fan is deemed to be included in rate quoted) 182 Taking down old unserviceable ceiling fans, depositing to AGE E/M store & supply and fixingnew ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) 183 Taking down old unserviceable storage type water heater, depositing to AGE E/M store & supply and fixingnew electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc 184 M&L earthing GI4mm GI wire complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI wire 4 mm size by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and includingnecessary excavation and earth work in any type of strata, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc., complete all as specified.
Contract Date: Feb 27, 2026 Contract Value : 1.00 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
29.
Public Administrative Department #9686261 Technical Bid
Tender For Renovation Of Auditorium At Nac Barpali- 1 Earth work in excavation of foundation trenches in all type of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge. 2 Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. 3 Supplying of filling sand in foundation and plinth including watering,ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-Charge. 4 Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone agregate 40mm nominal size) as levelling course in floor and plinth including tempering, curring, shuttering etc. complete all depth and height including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. 5 Fly ash Brick masonry using bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.GROUND FLOOR 6 Providing and laying plain cement concrete 1:2:4 (1 cement: 2 sand: 4 stone aggregate 12mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc.complete all depth and height including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. 7 Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. 8 First Floor 9 Column 10 Roof Beam 11 Roof Slab 12 Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. 13 First Floor 14 Fly Ash. brick masonry of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge 15 First Floor 16 12mm cement plaster to out side of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. 17 Ground floor 18 First floor 19 16mm cement plaster to inside of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. 20 Ground floor 21 First floor 22 6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. 23 Ground floor 24 Supplying, fitting & fixing of 8-25 mm thick & size of 600x600 mm vertified floor tile of matt finish with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) 25 Ground floor 26 Supplying, fitting & fixing of 8-25 mm thick and size of 600x600 mm vertified wall tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. 27 Ground floor 28 Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures in all respect including cost of materials, conveyance, loading & unloading and taxes of all materials and cost of all labour, sundries, T & P etc. required for all the work complete as per the directions of Engineer -in-charge. 29 Ground Floor 30 Providing and fixing seasoned sal wood work in frames at any locations including doors, windows,cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing / specification, at all floors and all heights. 31 Ground floor 32 32mm piasal wood or local Teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect 33 Ground floor 34 Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge 35 Ground floor 36 Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. 37 Ground floor 38 First floor 39 Painting two coats with approved anti-fungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge. 40 Ground floor 41 First floor 42 Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. 43 Ground floor 44 First floor 45 Painting two coats with approved plastic emulsion paint over a coat of wall primer of make Dulux / Berger / Asian to inside surface of walls finished with Acrylic Wall putty (water based) of make (Birla / JK) and finished smooth & even surface to receive painting using roller to the final coat including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge. Note :- Sample of Paint & Primer shall be approved before procurement and use. 46 Ground floor 47 First floor 48 Painting two coat with approved synthetic enamel paint to new iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. 49 Ground floor 50 Painting two coat with approved synthetic enamel paint to new wood work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. 51 Ground floor 52 Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect. 53 Ground floor 54 Preparation of fabrication drawing (shop drawing approved by EIC) and supply ,fabrication , erection,testing & commissioning of structural steel work in built up tubular(round,square,rectangular hollow tubes etc.) trusses etc. inlcuding cutting,hoisting,fixing in position and painting with one coat of red oxide primer and two coats of enamel paint,including cost of all material,labours, all consumables,all required plants & machinery,conveyance, loading and unloading, all taxes (excluding GST) etc all complete as per the direction of Engineer-in-charge. 55 Providing & Fixing of prefabricated insulated roofing consisting of 0.5mm TCT colour coated trough galvalume sheet (AZ-150) on exposed side, 0.5mm TCT colour coated plain galvalume sheet (AZ-150) with light groove on the inner side with Rockwool Slab of 100Kg/M3 density converted to lamellar as the core material. Rockwool Slab is bonded to steel sheet with industrial grade adhesive, having thickness of 50mm (at the valley position between outer and inner sheets) including fixing of ridge,flashing and gutter complete in all respect as per shop drawing submitted by contractor and approved by EIC including the cost of all labours, materials, conveyance, loading and unloading, all taxes (excluding GST) and sundries and T&P etc all complete as per direction of the Engineer -in-charge. 56 MAIN GATE WITH COMPOUNT WALL RAISING 57 Earth work in excavation of foundation trenches in all type of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge. 58 Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. 59 Supplying of filling sand in foundation and plinth including watering,ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-Charge. 60 Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone agregate 40mm nominal size) as levelling course in floor and plinth including tempering, curring, shuttering etc. complete all depth and height including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. 61 Providing and laying plain cement concrete 1:2:4 (1 cement: 2 sand: 4 stone aggregate 12mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc.complete all depth and height including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. 62 First class Fly ash Brick masonry using bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. 63 Fly Ash. brick masonry of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge 64 RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centring and shuttering and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position as per direction of the Engineer in charge 65 Footing: - 66 Column up to Plinth: - 67 Plinth Beam: - 68 Column up to First Floor: - 69 Beam: - 70 Roof Slab: - 71 Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. 72 Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. 73 12mm cement plaster to out side of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. 74 Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. 75 Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. 76 Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. 77 Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. 78 Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. 79 Painting two coat with approved synthetic enamel paint to new iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. 80 PAVER BLOCK 81 Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. 82 Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. 83 Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. 84 Sand filling as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision). 85 Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone agregate 40mm nominal size) as levelling course in floor and plinth including tempering, curring, shuttering etc. complete all depth and height including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. 86 Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. 87 Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MOSRT&H Specifications for Road & Bridge works (4th Revision) 88 Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. 89 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. 90 DRAIN 91 Earth work in excavation of foundation trenches in all type of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge. 92 Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. 93 Supplying of filling sand in foundation and plinth including watering,ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-Charge. 94 Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone agregate 40mm nominal size) as levelling course in floor and plinth including tempering, curring, shuttering etc. complete all depth and height including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. 95 RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centring and shuttering and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position as per direction of the Engineer in charge 96 Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. 97 Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. 98 INTERNAL AND EXTERNAL P.H, SANITARY WORKS 99 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 100 20mm dia C - PVC pipe 101 25mm dia C - PVC pipe 102 32mm dia C - PVC pipe 103 40mm dia C - PVC pipe 104 Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 105 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) 106 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) 107 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) 108 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) 109 25mm dia brass full way valve (Shakti make) 110 32mm dia brass full way valve (Shakti make) 111 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) 112 15mm CP Extension piece 113 125mm CP grating 114 15mm size C.P. flange 115 Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 116 1000 liters capacity PVC water storage tank 117 2000 liters capacity PVC water storage tank 118 supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. 119 Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge 120 Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. 121 Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 122 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) 123 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) 124 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) 125 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) 126 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) 127 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) 128 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) 129 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) 130 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) 131 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) 132 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) 133 Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 134 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) 135 Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal 136 Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 137 European water closet with p trap plain(Hindware/Parryware/Neycer make) 138 One piece commod(Hindware)ELEMENT Cat No.92084. 139 Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 140 Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink 141 Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 142 Towel ring 143 Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 144 600mmx125mm plate glass shelf with CP/NP guard rails. 145 Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 146 600mmx450mm size B.E mirror (swivelled type) 147 Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 148 CP soap holder 149 Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge 150 Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge 151 Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge 152 Inside size 76cmx76cmx46cm with 18” dia RCC MH cover 153 Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge 154 Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge38.48 x 0.10 155 Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 38.48 x 0.10 156 Supplying all materials, labour, T&P and providing and fixing Vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge ) 157 Kajaria/Somany/Johnson tile 60cmx60cm 158 Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. 159 Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) 160 Kajaria/Somany/Johnson tile 60cmx30cm 161 Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centres standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. of make Rajshri Plastiwood/ Alstone/Aramstrong or euivalant as per direction of Engineer-in-charge. 9 x 0.76 x 2.10 162 Factory made Solid WPC door frame of size 90mmx45mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification. of make Rajshri Plastiwood/ Alstone/ Aramstrong or euivalant as per direction of Engineer-in-charge. 9 x 4.96 163 Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liters along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge 164 Aqua guard pure Chill 80 PSS UV 165 Ext. S/D Portion 166 Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufactures specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 167 100mm dia P.V.C. pipe 168 150mm dia P.V.C. pipe 169 Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. 170 MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) 171 Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. 172 1 no 30 Users Septic tank 173 Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. 174 4.09mx2.09mx1.50m= 175 Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. 176 4.09mx2.09mx0.63m= 177 Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 178 4.09mx2.09mx0.08m= 179 Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 180 Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. 181 3.66mx1.66mx0.10m= 182 Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. 183 Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge 184 RCC floor, roof slab chhaja up to 4.430 m height 185 Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. 186 Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. 187 Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 188 Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. 189 Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. 190 Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. 191 1 no 10 Users Septic tank 192 Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. 193 Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. 194 Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. 195 Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 196 Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 197 Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. 198 Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. 199 Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge 200 Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. 201 Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. 202 Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge 203 Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. 204 Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. 205 Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories 206 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only 207 Drilling of 200mm dia bore 208 00 mtr to 30mtr 209 30 mtr to 45mtr 210 Drilling of 150mm dia bore 211 45 mtr to 215.00mtr 212 Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 213 Lowering of 200mm dia P.V.C casing pipes 214 00 mtr to 30 mtrs 215 30 mtr to 60mtr 216 Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber O ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 217 200mm dia PVC (sch-80) pipe 218 Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) 219 Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge 220 By DTH Rig 221 Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: 222 Rocky terrain with boulder formation for 300m depth 223 Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 224 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) 225 DOL Control panel 226 40mm dia steel short piece 227 Well cap 228 50mm size CI bracket 229 2.50sqmm flat cable 230 20mm dia rigid UPVC pipes 231 Steel rope with cover 232 Labour charges for lowering including transportation 233 Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 234 32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 1
30.
Defence #9663794 AOC
Tender For Special Repair To Ors Block At Zorawar Enclave And 02 X Bathroom Portion Of Building No P-06 Under Age B/R-I Of Ge (N) Mamun.; 1 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed. 2 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. 3 Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. 4 S&F pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed. 5 S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed. 6 S&F 35mm thick factory made plain framed panelled shutters of2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply.The size of rail and stile as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed. 7 S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per section 8 clause 8.20 (a) of SSR Part-Icomplete all as specified and directed 8 M & L preparation of new wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint over a coat of pink primer complete all as specified & directed. 9 S&Ffor 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9kg per sqmas in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. 10 Repair to old steel window not exc 1 sqm including replacement of unserviceable/ damagedhinges, all handles, necessarywelding to shutters and chowkhat for making window in serviceable condition, all members grinding to smooth surface and applying redoxide primer to grinded surface, complete all as specified and directed. 11 M&L Soild PVC door frame of size 50mm x 95mm (suitable for moulded door) made out of 5mm wood grain colour PVC sheets & edges will be painted to match printed sheet as reinforced with 19 mm square MS tube and fixing in opening as specifiecation & drawing complete all as specified and as directed. 12 S&F Solid PVC door frame of size 50 x 47 mm made out of 5mm wood grain printedPVC sheet used instead plain colour PVC sheet & edges shall be painted to matchwith printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. 13 S&F Factory Made Solid PVC Moulded door Shutter With wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. 14 S&F Box type Steel windows and ventilators comprised of tubular frameand shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg staydovetailedor welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. 15 M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paintcomplete all as specified and as directed. 16 S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed. 17 S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed. 18 S&F 3 mm thick pinhead glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed. 19 S&F stainless steel butt hinges 100 mm,medium weight,complete all as specified & directed. 20 S&F 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed. 21 S&F aluminiumanodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed. 22 S&F 150 mm size aluminium alloy handles, febricated type extruded section(as per sample), complete all as specified and directed. 23 S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 24 S&F 100mm hasp and staples, safety type (as per sample), of alumium anodised complete all as specified and directed. 25 S&F in repair25mm bore mild steel powder coated, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed. 26 Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc and removal of debris/rubbish off the premises etc complete all as specified and directed. 27 M&L for Brick work with, sub classB bricksstraight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & directed. 28 Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan exc 6 mtr mean radius built in CM 1:4complete all as specified and directed. 29 M&L Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan to any radius in half thick walls,built in CM 1:4complete all as specified and directed. 30 M&L Brick work with fly ash bricks straight or curved on plan to any radius in half thick walls,built in CM 1:4complete all as specified and directed. 31 Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. 32 M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. 33 M&L for Rendering 5mm thick cement plaster on fair faces of brick work, concrete sruface in cement mortar (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and directed. 34 M&L for 15mm thick plaster in two layers (10+5mm) in cemet mortar 1:4 external layer of plaster shall be mixed with liquid water proofing compound as per manufacturers instructions on brick work or concrete surfaces or in chajjas/parapet walls etc, surface finished even and smooth with using extra cement complete all as specified and as directed.Note: WPC shall be measured and paid for separately. 35 M&L for rendering or plastering 15 mm thick cemet plster on fair faces of brick work or concrte surfacesin CM 1:4 in two layers(5mm finishing layer over 10mm base layer) finished even and surface without using extra cemen with WPC over finishing layercomplete all as specified and directed.Note: WPC shall be measured and paid seperately) 36 M&L for rendering or plastering 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas,roof projections, drainge etc, making the edges in line, in true shape and finishing the surface without using extra cement complete all as specified and directed. 37 M&L for cleaning, breaking, loose concrete, changingofcorressive reinforcement with new reinforcement (if required) and filling plain cement concrete 1:1 1/2 :3 type B0 using 12.5mm graded aggregate using approved bonding chamical(from Fosroc/STP/Sikka/ Dr. Fixit) at places like chajja, sunchades, roof projection, fascia, etc beams, columns etc including necessary scafolding, formwork (upto G+2 floor) etccomplete all as specified and directed. Note :- The cost of scafoldings, formwork, reinforcement etc shall deemed to be included in the quoted rate of item. Reinforcement shall be measured and paid for seperately. 38 M&L for preparation of new plastered surface of external wall and chajjas,making surface smooth using sand paper, priming the surface with alkali resistance primer paintfor external surface, applying two coats of cement base paint including curing complete all as specified & directed. 39 M&L for preparation of old wall surface, making surface clean, dry, free from any loose paint film, dirt, chalk, grease, fungus and algae etc and applying one coat of antifungal acrylic emulsion exterior weather proof paint complete all as specified and directed. 40 M&L two coats of distemper oil enulsion over primer coat after application of average 2mm thick wall care putty including prepartion of new plastered wall surface complete all as specified & as directed. 41 M&L for three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and as directed. 42 M&L for three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed. 43 M&L two coats of distemper oil enulsion overprimer coat after application of average 2mm thick wall care putty including prepartion of oldwall surface complete all as specified & as directed. 44 M&L two caot of white wash on surface of wall including preparation of old plastered surface of wallscomplete all as specified & directed 45 M&L two caot of white wash on surface of wall including preparation of old plastered surface of ceiling complete all as specified & directed 46 M&L for complete removal of old existing treatment including preparation of plaster/unplaster surfaces ofwalls, chajja, fascia etc and applying two coat of exteior emulsion paint (weather coat) over a coa of primer any shade or colour complete all as specified and directed. 47 M&L for preparation of old plastered surface of external wall and chajjas,making surface smooth using sand paper, priming the surface with alkali resistance primer paintfor external surface, applying two coats of cement base paint including curing complete all as specified & directed. 48 Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed. 49 M&L for cement concrete type C-1, 1:3:6 (using 20mm graded crushedstone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. 50 Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing),rubish off the premises complete all as specified and directed. 51 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqmin skirting/dado or verticle surface etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 10mm thick screed bed or bedding layer of mortar in CM 1:4 inculidng taking down plaster, rubish off the premisescomplete all as specified and directed. 52 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.38 sqm as in floor v etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:4complete all as specified and directed. 53 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqmin floor, skirting/dado or verticle surface etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:4complete all as specified and directed. 54 M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed . 55 M&L for green/black marble (Bhaislana Zerba) work 15-16 mm thick (table rubbed and polished) in cooking plateform,window cill, steps, stair case trade & riser etc in cement mortar (1:4), pointed in white cement (1:2) using marble dust with admixture of pigment to match with marble shade ofincluding demolition of old stones/tiles and rubbish off the premises complete all as specified and directed. 56 M&L green Marble work 12-15mm thick (table rubbed and polished) in cooking plateform,window cill, steps, stair case trade & riser etc in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra complete all as specified & directed. 57 M&L for Round chamfering to the edgesof marble/granite slabs not exc 15 mm wide complete all as specified and directed. 58 Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore dia all as specified and directed. 59 All as per item No 58 here above but 15 mm bore 60 S&F15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. 61 Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed. 62 M&L for cutting chases, pinning in brick work,making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed. 63 S&F20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. 64 Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed. 65 S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed. 66 S&Fkitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers , PVC waste pipefixed in repair including waste copling; bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 67 S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm of approved make with mild steel screw complete all as specified and directed. 68 S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch lever handle screwed both ends for iron pipe 15mm bore dia fixed in repair, complete all as specified and directed. 69 S&F in repair15mm bore dia Bib taps long body, cast copper alloy, chromium plated fancy typeISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed. 70 S&F in repairVitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting standincluding 32 mm diawaste pipe complete all as specified and directed. 71 S&F in repair 15mm bore pillar tap capstan head cast copper alloy, chromium plated, screwed down high pressure with or without letters HOT or COLD with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed. 72 S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick complete all as specified and directed. 73 S & F brass CP Shower rose with or without swivel joints,(any size) including fixing to steel pipe or union complete all as specified & directed. 74 S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed. 75 S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. 76 S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern(including fixingofflush pipe) including provision of cement concrete bedding, in repair complete all as specified & directed. 77 Chromium plated peg stay 6 hook as per sample approved by Engr-in-charge, complete all as specified and directed. 78 S&F in repair Vitreous china bowl urinal half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe including providing and fixing of PTMT urinal spreader with 15mm dia pipe, complete all as specified and directed. 79 PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete (sunken floors etc) complete all as specified. 80 Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately. 81 S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC,complete all as specified and directed. 82 S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 83 Rotational moulded polyethlene water storage tanks of capacity exc 500 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tANK of any capacity complete all as specified & directed. 84 Rotational moulded polyethlene water storage tanks of capacity exc 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tANK of any capacity complete all as specified & directed. 85 S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixedcast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed. 86 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etccomplete all as specified and directed. 87 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. 88 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls with clamps, complete all as specified and directed. 89 110mm bore dia PVC (SWR) reducers, complete all as specified and directed. 90 110mm bore dia PVC (SWR) branch piece, single (single Y) equal or unequal with parrallel branches fitted with oval access doors, fixed in repairs complete all as specified and directed. 91 110mm bore dia PVC (SWR) bends,any radius (larger bore measured), complete all as specified and directed. 92 75mm bore dia PVC (SWR) bends, fixed in repair, complete all as specified and directed. 93 S&F in repair cast iron 75mm bore Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors, fixed in repair complete all as specified and directed. 94 75mm bore pipe PVC (SWR) vent cowl, fixed in repair, complete all as specified and directed. 95 S&F in PVC floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed. 96 S&F Mild steelTMT bars bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. 97 All asper srl item No 96 above but6 to 8mm dia. 98 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, as in floor with all fittings complete all as specified and directed 99 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed 100 S&F in repairs 100mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured)complete all as specified and directed. 101 S&F in repairs 100mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access doorcomplete all as specified and directed. 102 S&F in repair cast iron 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors complete all as specified and directed. 103 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, as in floor with all fittings complete all as specified and directed 104 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed 105 S&F in repair Cast iron soil, waste and vent pipes, sand cast, 50mm bore in any length with or without ears with cement joints, fixed to walls with all fittings complete all as specified and directed 106 S&F in repairs 75mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured)complete all as specified and directed. 107 S&F in repairs 75mm diaCast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access doorcomplete all as specified and directed. 108 S&F in repair cast iron 75mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doorsfixed in repiars complete all as specified and directed. 109 S&F in repair Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed. 110 S&F in repair Cast iron cowl of 50mm bore complete all as specified and directed. 111 S&F in repair Cast iron Swan necks (or offsets) upto 152mm projection for 100mm to 50mm pipe complete all as specified and directed. 112 M&L forcement concrete 1:2:4 Type B1 (using 20 mm graded crushedstone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings upto 60 cm in height,water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and directed 113 M&L 10 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) 114 M&L 20 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) 115 M&L for preparation of surfaces and apply first coat fiber reinforced elastomatic liquid water proofing membrane formulated with PU hybrid ploymersand reinfoecing acrylic fibers with sun reflective index(SRI) of 100-110 having maximumelongation of 350% tensile strength od 2.9 Mpa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic presure and reduce surface temprerature upto 10 degree celsius with 33% ditution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 grm/sqm and pastinf it properly with overlaping of 50mm and allow it to dry, Apply second coat of undiluted coat @ 0.45 ltr/ Sqm . Apply third and final coat undiluted @ 0.45 ltr/sqm complete application to be done by the manufacture of authorised applicator complete all as specified and directed. 116 Note for item No 115 :-(a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface.(b) Conduct ponding test after 7 days, continnue curing of 14 days.(c) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (d) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be includedthis fact into account and no extra payment shall be made on this account. (e) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted.(f) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material. 117 Supply only liquid water proofing compoundcomplete all as specified and directed. 118 M&L PCC 1:2:4 type B1 (using 20mm graded crushedstone aggregate) as in surface channel and drains, benching of manholes complete all as specified and directed 119 Cutting into existing manholes for connecting new drains for ineternal dia of pipe 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. 120 M&L for Providing, precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), as in cover slabs (for septic tanks, manholes and the like) and similar articles including necessary moulds/fromwork etc, set and jointed in cement mortar (1:6) complete all as specified and directed. 121 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixturesuch as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc with cement moratr and finishers to match existing surface complete all as specified and directed. 122 M&L for point wiringusing 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.2mm thick GI/MS pressed steel sunken boxes of adequate size,3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. Note: 1) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible. 123 All as per Ser item No 121 but for one light point controlled bytwo 2 way switch. 124 All as per item no 121 One bell/ buzzer point controlled by one bell push 5/6 Amp AC 240 Volt etc complete all as specified and directed. 125 All as per Ser item No 121 but for one5/6 Amp socket outlet point on same board controlled by one switch. 126 All as per Ser item No 121 but for one5/6 Amp socket outlet points on independentboard controlled by one switch. 127 All as per Srl item No 121 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. 128 S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed. 129 S&F socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type with shutters, 240 volts complete all as specified and as directed. 130 S&F socket outlet 2 in 1, 3 pin, 5/15 Amp flush type, 240 volts complete all as specified and as directed. 131 S&F socket outlet 2 in 1, 6 pin, 6/16 Amp flush type, 240 volts complete all as specified and as directed. 132 S&F switch 15/16 Amps, flush type, 240 volts complete all as specified and as directed. 133 S&F switch piano flush button single pole two way 5 Amp 240 volts complete all as specified and as directed. 134 S&FBell push, flush type, 5/6 Amp AC 230 Volt etc complete all as specified and directed. 135 S&F Bell Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed. 136 S&F switch flush button single pole two way 5 Amp complete all as specified and as directed. 137 S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals. 138 S&F stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed. 139 S&FLamp holder jumbo modular type, PVC/Polycarbonate type with back plate complete all as specified. 140 M & L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 20mm dia 1.5mm thickwith all accessories incl cutting chases on wall andmaking good to the disturbed surface of wall/floor with cement mortar 1:4 and finishes to match existing surface complete all as specified and directed. 141 M&L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 4 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 25mm dia 1.5mm thickwith all accessories, fixed to surface/recessed including taking down existing submain with old unsv PVC conduit complete all as specified and directed. 142 S&F in replacement Triple pole and neutral DB 4 waysheet metal enclosures double door 415 V AC,50 Hz AC with IP-54 1K-09 rating having fully insulated copper bus bar of rating not less than 200 Amps , insulated neutral bar, earth bar and cable ties of cable mangement including ployuthrene gasket making good disturbed surface to match with existing wall, painting the plastered surface with same colour complete all as specified and directed. 143 MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wallincluding cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. 144 S&F MCB SP 240V, 50Hz of rating6 to 32 Amp, B curve using suitable size copper thimbles complete all as specified and directed. 145 All as per Ser item No 143 but for size 32 Amps MCB SPN. 146 S&FMCB, TPN 40 to 100 Amps, 415 volts, C curve, 50Hz, 10 KAcomplete all as specified & directed. 147 S&F in replacement MCB, SPN, 240 volts, 50Hz, 10 KA of rating 32 Amps,C series complete all as specified & directed. 148 S&F in replacement MCB, SP, 240 volts, 50Hz, 10 KA of rating 5 to 32 Amps,C series complete all as specified & directed. 149 S&Fsurface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protectioncomplete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. 150 S&F in repalcement of intenso LXS LED Batten 20 watt of size not less than 37, 6500 K, 230 volts, PF-0.95, CRI-80, life 25000 burning hours, wall mounted complete with all accessories internely pre wired and including connecting up with 3 core twisted flexible copper conductor cable of suitable size complete all as specified and directed. 151 S&F 20W surface / wall mounted box type batten LED fitting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. 152 All as per ser item No 150 but for 10 W LED batten fitting 2 feet long. 153 S&F LED wall security lights of 35 Watthaving pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W,IP65 protection, IK07 rating,inbuilt electronic driver withPF>0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. 154 Taking out carefully seviceable single phase energy meters from meter box after disconnecting electrically and keeping aside for refixing and dismantling old/unsv meter box and removing to store for keeping in safe custody for taking credit and making good to disturbed surfaces of wall, floor, etc complete all as specified and directed. 155 S&F sheet moulded compund (SMC) meter box fire retardant type of sixe not less than 600x500x150mmto enclose 04 Nos single phase electric meters with hinged type front operated door having transparent acrylic sheet & proper locking arrangement and flush mounting in wall including refixing the serviceable electirc meters dismantled under item nO 30 & making electirc connections inluding cleaning of disturbed area and making good the disturbed surface and matching with existing specification complete all as specified and directed. 156 S&FLED Building light 60 Watt, 230 volts with surge protection not less than 4 KV and 10 KV separate in the lighting housing, IP 65, Energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LEDs as light source and electronic driver fixed on pole/wall along with service bracket as per sample, clamps, nuts, bolts, and washers including making electric connection with 1.5 Sqmm multistranded 3 core aluminium conductor cable PVC insulated complete all as specified and directed. 157 Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 4 core, including taking down old, complete, all as specified and directed.Note : All the cable entires should be through proper metallic cable gland. 158 Excavation in trenches in any type of soil not exceeding 1.5 m wide and n.exc. 1.5 m deep and getting out for laying of cables complete all as specified and directed. 159 Returning filling, in including spreading , levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed. 160 Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. 161 M&L for sand filling in trenches dry and clean san dunwashed including punning around cble for protection of under ground cable complete all as specified and directed. 162 40mm dia GI tubing, light grade with all fitting laid in trenches or fixed on wall or along pole complete for protection of electric cable/strip, complete all as specified and directed. 163 M&L for well burned bricks, laid flat (old size) sub class B designation 75 for cable protection complete all as specified and directed. 164 Earthing complete with galvanized steel earth plate electrode60cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of2009.Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmmin lieu of CI cover.
Contract Date: Feb 20, 2026 Contract Value : 34.27 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
31.
Defence #9640101 AOC
Special Repair To Certain Omqs (Phase-I) At Af Stn Barackpure- Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbingdown with water etc. and removing debrish from site complete all as specified and directed. 2 Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc.including removing of unserviceable material from site complete all as specified and directed. 3 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing of rubish from site complete all as specified and directed. 4 Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including reinforcement cut as required to facilitate demolition and removing debries from site of work completeall as specified and directed. 5 Dismantling of timber scantling 40 Sqcm and over in section, in any position in framed work and removing materials from site of work complete all as specified and directed. 6 Dismantling of wrought iron or mild steel work of any description not otherwise provided for and removing materials from site of work complete all as specified and directed. 7 Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises completeall as specified and directed. 8 Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. 9 Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and directed. 10 Taking down chowkats or frames with shutters exc. 1.50 sqm but n.exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and directed. 11 Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and directed. 12 Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each and refixing in the same opening complete all as specified and directed. 13 Taking down chowkhats with shutter (without taking of shutter from the frame) exc.1.5 Sqm but n.exc 4.0 Sqm each and refixing in same / other opening with using hold fast, minor cement concrete work and making good complete all as specified and directed. 14 Material and labourfor 15mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers, first layer of 10mm thick and top layer of 5mm thick with using liquid water proofing coumpound (WPC) @ 200ml/50Kg bag or as per manufacturers instructionand finish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. 15 Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) andfinish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed. 16 Material and labour for 5mm thick rendering onconcrete surfaces in cement mortar (1:3) andfinish the surfaceseven and smooth without using extra cementin ceiling complete all as specified anddirected. 17 Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed. 18 Supply only liquid water proofing compound (WPC) completeall as specified and directed. 19 Material and labour for preparation of new plastered surfaces of wall and applying three coat of white wash completeall as specified and directed. 20 Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying 1mm thick wall care putty complete all as specified and directed. 21 Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash completeall as specified and directed. 22 Materials and labour for complete removal of existing treatment of old decorated surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying2mm thick wall care putty including preperation of surface complete all as specified and directed. 23 Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. 24 Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. 25 Material and labour for preparation of old decoratedsurfaces of wall and applying one coat of white wash complete all as specified and directed. 26 Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed. 27 Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in coping, bed plate, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating, including necessaryformwork complete all as specified and as directed 28 Material and labour for brick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6)complete all as specified and directed. 29 Materials and labour for half brick thick brick work with sub class `B` bricks, old size, straight or curved on plan to any radius built in cement mortar(1:4) complete all as specified and directed. 30 Material and labour for well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 31 Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular insection, wrought, secured with nails or brads, sectional area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and directed. 32 Supply and fix 35mm thick 2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all asspecified and directed. 33 Supply and fix factory made 30mm thick second class hardwood plain framed panelled shutters (any numbers of panels) with panels of timber flat both sides (feather edged) or of veneered particle board medium density, wood particle with commercial face veneers including framing is moulded on solid (for each side) and fitted to chowkats complete all as specified and directed. 34 Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. 35 Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. 36 Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. 37 Supply and fix mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders, framed balusters, walk ways; railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 38 Supply and fix in repair solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/Aluminium frame complete all as specified and directed. 39 Material and labour for second class hard woodsmall fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n. exc 200 cu. cm each complete all as specified and directed. 40 Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. 41 Suplly and fix stainless steel 100mm size butt hinges, medium weight complete all as specified and directed. 42 Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. 43 Supply and fix 100mm size aluminium alloy handles, cast type, anodised complete all as specified and directed. 44 Suplly and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed. 45 Suplly and fix in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed. 46 Supply and fix in repair mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. 47 Supply and fix door catcher/door magnet for cabinet / cupboard / wardrobe / door closer magnet and the same magnets come with a magnetic force of 9 Kgs, which is ideal for keeping cabinet doors closing tightly complete all as specified and directed. 48 Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed. 49 Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed. 50 Supply and fix 4 mm thick figured glass pin head type and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed. 51 Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 52 Material and labour for RCC (1:2:4) type B-1 (using 20mmgraded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 53 Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. 54 Material and labour for mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. 55 Material and labour for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bres-summers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished flat surfaces of concrete complete all as specified and directed. 56 Supply and fix in repair kitchen stainless steel sink of steel grade-304, 1.00 mm thickwith plug, washers and wastes including bedding in cement mortar to dwarf wall or including cantilever cast iron brackets, connecting union etc., overall size 610 mm x 460 mm with bowl size 560mm x 406mm x 203mm including 32 mm bore waste coupling PTMT (minimum weight 45gms)and 32 mm dia PVC corrugated flexible waste pipe of 800 mm longcomplete all as specified and directed. 57 Material and labour for vitrified ceramic tiles (premium quality) 8 to 9mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed. 58 All as per item No 57.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:4) and -ditto-. 59 Material and labour for non-skid ceramic coloured tiles (premium quality) 7 to 8mmthick (square/rectangular) area of each tile exceeding 0.18sqm but not exc. 0.38sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6)complete all as specified and directed. 60 Material and labour for glazed ceramic tiles of size 600x1200x8-9 mm (premium quality) coloured in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:3) completeall as specified and directed. 61 Material and labour for glazed ceramic tiles of size 300x450x7-8 mm (premium quality) coloured in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:3) completeall as specified and directed. 62 Material and labour for 20mm thick jade black granite for top shelves (of any type) work (table rubbed and polished) in cupboard shelves, steps, jambs, window cills, cooking platforms and like in cement mortar (1:4) including pointing, grooving to wall etc with white cement using marble dust with admixture of pigment to match with shade of granite including moulding/nosing fixed independently complete all as specified and directed. 63 Material and labour for machine cut cudappah stoneslab 20-25mm thick as in shelf including rubbing and polishing complete including taking down existing shelf complete all as specified and directed. 64 Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations completeall as specified and directed. 65 Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed. 66 Material and labour for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’,thickness of concrete slab in 75mm complete all as specified and directed. 67 Taking up or down 15 mm bore steel tubing and connections complete all as specified and directed. 68 Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed. 69 Supply and fix 15 mm bore steel tubesmedium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floorscomplete all as specified and directed. 70 Supply and fix 20 mm bore steel tubesmedium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors complete all as specified and directed. 71 Material and labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed. 72 Supply and fix in repair 15mm bore stop valves, castcopper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed bothends for iron pipe or for unions complete all as specified and directed. 73 Supply and fix in repair 15mm bore fancy type, chromium plated, two way, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. 74 Supply and fix in repair 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. 75 Supply and fix in repair 15mm bore fancy type wall mixer chromium plated, brass, round headed single liver with extruded brass made spindle and housing with wall flange, screwed down high pressure with long screwed shanks, screwed for iron pipe complete all as specified and directed. 76 Supply and fix in repair 15mm bore fancy type sink tap chromium plated brass, round headed single liver with quarter turn option with areator, swan neck type wall mounted with extruded brass made spindle and housing with wall flange, screwed down high pressure with long screwed shanks, screwed for iron pipe complete all as specified and directed. 77 Supply and fix in repair 15mm bore angle cock fancy type, chromium plated, cast copper foriron pipe complete all as specified and directed. 78 Supply and fix in repairPVC connection pipe 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. 79 Supply and fix in repair brass chromium plated shower rose 125mm size with or without swivel joint complete all as specified and directed. 80 Supply and fix in repair 15mm bore fancy type pillar tap long body (swan neck type) cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. 81 Supply and fix in repair 125mm PTMT grating doom(minimum weight 40gms) complete all as specified and directed. 82 Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) white in colour (ISI marked) hoisted and fixed in position all as specified in SSR Part-I including dismantling of old unseviceable existing tank complete all as specified and directed. 83 Supply and fix in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. 84 Supply and fix in repair vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe including P or S trap fixed on floorcomplete all as specified and directed. 85 Supply and fix in repair plastic water closet seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminium hinging device complete all as specified and directed. 86 Supply and fix in repair vitreous china wash basin oval shaped counter sunk type of size 550 x 400mmincluding 32mm dia waste fittings, brass,chromium plated for glazed ware sinks, basin with long screws shanks and fly nutsend fixed complete all as specified and directed. 87 Supply and fix in repair vitreous china wash basin with pedestal type of size 550 x 400mm flange end bedded in red lead cement and other end fixed complete all as specified and directed. 88 Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 89 Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and direted. 90 Supply and fix in repair toilet paper holder, brass, chromium plated, fixed with stainless screw complete all as specified and directed 91 Supply and fix in repair brass CP basin mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. 92 Supply and fix in repair 40mm bore high density polyethylene pipes (HDPE) with all fittings of pressure rating 6 kgf/sqcm fixed to walls, ceilings or in floors etc. complete all as specified and directed. 93 Supply and fix in repair 25 mm dia aluminium powder coated decorative / fancy type dropery rodwith bracket complete all as specified and directed. 94 Supply and fix in repair looking mirror ofsize 600mm x 500mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and directed. 95 Dismantling of 110/100/75mm dia PVC/ cast iron or reinforced concrete drain pipes with all fittings, jointed in cement mortar and taking out of trenches/ from wall, if required complete all as specified and directed. 96 Supply and fix solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet plain colour reinforced with MS square tube as per specification and drawinggiven in SSR Part-II 2020 complete all as specified and directed. 97 Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification and drawinggiven in SSR Part-II 2020 complete all as specified and directed. 98 Supply and fix factory made PVC wire gauzed door shutters 30mmm thick (style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of wire gauzed shutter, the wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and jointed together with solvent cement as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed. 99 Supply and fix factory made 30mm thick flush shutters, solid core construction, with block board core both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and directed. 100 Material and labour for cutting holes into or through brick wall built in cementmortar of superficial area not exc 150 sqcm and making good in CM (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed. 101 Material and labour for cutting holes into or through brick wall built in cementmortar of superficial area exc 400 sqcm but n. exc 0.10 sqm and making good in CM (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed. 102 Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. 103 Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. 104 Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. 105 Fixing only 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. 106 Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. 107 Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. 108 Supply and fix 110mm bore PVC (SWR) juction single (singleT) equal or unequal with access door complete all as speified and directed 109 Supply and fix 110 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed. 110 Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specified and directed. 111 Supply and fix 75mm bore PVC (SWR) juction single (singleT) equal or unequal complete all as speified and directed. 112 Supply and fix in repair 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. 113 Supply and fix in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. 114 Supply and fix in repair 32mm bore PVC corrugated waste pipe 800mm long complete all as specified and directed. 115 Supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. 116 Supply and fix in repair towel ring, fancy type, chromium plated, cast copper alloy fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. 117 Supply and fix in repair 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 118 Supply and fix in repair 5mm thick glass corner shelf of size 300 x 300mm with stainless steel railing fixed with chromium plated screws complete all as specified and directed. 119 Supply and fix in repair stainless steel plate rack 0.85 mm thick of size 914x914x254mm of steel grade-204 complete all as specified and directed. 120 Supply and fix in repair soap dish, brass, chromium plated complete all as specified and directed. 121 Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed. 122 Material and labour for preparation of newly bitumen surfaces and applying two coats of bituminous aluminium paint @ 0.10 ltrs per sqm per coat complete all as specified and directed. 123 Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mmgraded stone aggregate) as in leveling course for laying floor/ roof finishes etc complete all as specified and directed. 124 Material and labour for pre-cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate)in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set incement mortar (1:4) complete all as specified and directed. 125 Material and labour for applying expoxy based protective coating over cleaned exposed reinforcement as well as new reinforcement provided for corrossion prevention and fresh plaster bonding to old concrete complete all as per manufacturers instructions complete all as specified and directed. Make : Nitobond EP of M/s Fosroc or equivalent brand of make M/s Asian Paints Ltd/ M/s STP Ltd. 126 Material and labour for anti-termite treatement for the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wallincluding making good disturbed surfaces complete all as specified and directed.Note :The work shall be executed only through authorised applicator as approved by GE. 127 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. .complete all as specified and directed. 128 Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store for keeping in safe custody for reuse complete all as specified and directed. 129 Material and labour for light/fan point wiring (concealed type) with single core PVCinsulated unsheathedmultistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid non metalic PVC conduit with accessories including modular flush metal boxeswith inner and outer modular cover plates for housingswitches, sockets and regulatorswith all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor as earth continuity wire and connected to earth dolly complete all as specified and directed.Note: (a) Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for Each individual circuit from the distribution board.(b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces to fix PVC conduit.(c) Modular cover plate with frame and modular flush metal box shall be measured and paid seperately under respective items. 130 All as per item No. 129.00 here-in-before but for bell/buzzer point controlled by one push button on independent board and -ditto-. 131 All as per item No. 129.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-. 132 All as per item No. 129.00 here-in-before but for one five pins 5 Ampssocket outlet point on same board and -ditto-. 133 All as per item No. 129.00 here-in-before but for 15 amps socket outlet on independent board with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dollyand -ditto-. 134 All as per item No. 129.00 here-in-before but for one light point controlled by two 2-way switches of 5 amps and -ditto-. 135 All as per item No. 129.00 here-in-before but for 3 pin industrial socket outlet with 4.00 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 4.00 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dollyand -ditto-. 136 Supply and fix modular switch 2 way 6 amps, 1 module complete all as specified and directed. 137 Supply and fix modular switch 1 way 6 amps, 1 module complete all as specified and directed. 138 Supply and fix modular switch 1 way 16 amps, 1 module complete all as specified and directed. 139 Supply and fix modular bell push 6 amps, 1 module complete all as specified and directed. 140 Supply and fix modular shuttered sockets 6 amps, 3/5 pin combined two module complete all as specified and directed. 141 Supply and fix modular shuttered sockets 6/16 amps, 3/5 pin combined two module complete all as specified and directed. 142 Supply and fix modular fan regulator step type 120W, 2 module complete all as specified and directed. 143 Supply and fix modular white cover plate with frame of 1/2 module complete all as specified and directed. 144 Supply and fix modular white cover plate with frame of 3 module complete all as specified and directed. 145 Supply and fix modular white cover plate with frame of 8 module complete all as specified and directed. 146 Supply and fix modular white cover plate with frame of 6 module complete all as specified and directed. 147 Supply and fix modular white cover plate with frame of 4 module complete all as specified and directed. 148 Supply and fix modular flush metal box 1/2 module complete all as specified and directed. 149 Supply and fix modular flush metal box 3 module complete all as specified and directed. 150 Supply and fix modular flush metal box 4 module complete all as specified and directed. 151 Supply and fix modular flush metal box 6 module complete all as specified and directed. 152 Supply and fix modular flush metal box 8 module complete all as specified and directed. 153 Supply and fix in repair modular type telephone socket 1 module complete all as specified and directed. 154 Supply and fix in repair modular type TV socket 1 module complete all as specified and directed. 155 Supply and fix bell ding dong AC, 230 Volts, single pole complete allas specified and directed. 156 Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete allas specified and directed. 157 Supply and fix ceiling rose, 3 terminals/ Phases, fabricated of PVC/Polycarbonate, isolated body complete all as specified and directed. 158 Supply and fix rigid non-metallic PVC conduitof 20mm dia including all fittings such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed. 159 Supply and fix in repair modular fan regulator step type 120W, 2 module complete all as specified and directed. 160 Material and labour for painting and hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fancomplete all as specified and directed.Note:- Item obtained from item No 128.00 shall be reused under this items. 161 Supply and fix in repair sheet metal enclouser VTPN DB 4 ways double door having facility to fix MCCB in incomer and MCBs in outgoing, IP-43 type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed. 162 Supply and fix in repair sheet metal enclosureTPN DB 4 waysdouble door having facility to fix MCB in incomer and MCBs in outgoing,metal door IP-43type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed. 163 Supply and fix in repair sheet metal enclosureSPN DB 8 waysdouble door having facility to fix MCB in incomer and MCBs in outgoing,metal door IP-43type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed. 164 Supply and fix in repair MCCB 100 Amps current capacity, 415V, 25 KA, 4 Pole, with adjustable thermal and magnetic release type complete all as specified and directed. 165 Supply and fix in repair MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity C series complete all as specified and directed. 166 Supply and fix in repair MCB SPN, 240 Volts, 40 amps, C series, breaking capacity 10 KA complete all as specified and directed. 167 Supply and fix in repair MCB TPN, 240 Volts, 63 amps,C series, breaking capacity 10 KA complete all as specified and directed. 168 Supply and fix in repair MCB TPN, 415 Volts, 100 amps,C series, breaking capacity 10 KA complete all as specified and directed. 169 Supply and fix in repair industrial plug and socket type DB (functional unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified and directed. 170 Supply and fix in repair LED tube cool day light fitting 1 x 20W (+/- 5%), 220V, AC with extruded strip in thermally conductive material & extruded housing in optically efficient material milky white with system lumen efficacy > 120 lumen per watt minimum system 2300 - 2400 and chip, Integrated electronic driver, SMD based LED constant current supply with double sided connection to avoid short circuit and surge protection greater than 2.5 KV, IP 20 protection and CRI>80, Power factor > 0.95, THD less than 15%, correlated Colour temperature (CCT) of 6500K, Operating Voltage of 140 V to 270 V, frequency of 50Hz burning hours 50000 hours with comprises of CRCA pre coated metal housing complete all as specified and directed. 171 Supply and fix in repair LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed. 172 Supply and fix 300mm sweep steel body exhaust fan AC single phase 230/240 volt. 1400 RPM, heavy duty, ISI marked, along with metal blade powder coated metalic finish with GI sheet louvers, low noise including necessary electric connection with and including cutting/making opening having dia of the hole for 300mm sweep exhaust fan inany type of walls of any description with nut, bolt, washer and making good distrubed surfaces complete all as specified and directed. 173 Supply installation testing and commissioning of Electric storage water heater (rust and shock proof body) with attractive looks and corrision resistance inner tank having capacity 25 litre, 5 star rated with multi function safety valve , heating element, indicating lamps etc all as per following specifications :-(a) Power / Input : 8.7 Amp, 230 V, 50 Hz (b) Rated Power input in KW : 2 KW(c) Maximum rated Pressure : 8 Bar (0.8 Mpa) (d) Storage Capacity : 25 litre (e) Installation type : Wall mounted Vertical(f) Mean Hot Water Outlet - 75 degree celcius (g) Mixing factor - 30 % maximum (h) Water Proof degree - IP x 4 (j) Class of appliance - Class I (k) Heating element : Incoloy glass coated heating element, superior heating performance with excellent resistance to both oxidation and carbonization at high temperature setting . Resists corrosion against extreme and hard water conditions with minimum energy loss. Contd... 174 (l) Inner container : It shall be Feroglass coating, made of ultra thick super cold rolled steel plates with superior corrosion resistance and anti-rust property.(m) Anode rod - The tank has an anode rod with a stainless steel core. (n) Insulation : CFC free thicker PUF insulation. (o) Star Rating : 5 Star from BEE complete all as specified and directed. Make : Jaquar& Company Pvt Ltd / USHA/ AO-Smith. 175 Material and labour forconcealed submain wiring comprising single core , 2 run of 4 sqmm nominal cross sectional area, FR-LSHmultistrandedcopper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1 run of 4 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earthwirecomplete including taking down old unserviceable sub main wiring complete allas specified anddirected.Note :-(a) Cost for extra length of cables / wire required for connection to MCBs/DBs shall be included in quoted rates.(b). Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates. 176 Material and labour forconcealed submain wiring comprising single core , 2 run of 6 sqmm nominal cross sectional area, FR-LSHmultistrandedcopper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1 run of 6 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earthwirecomplete including taking down old unserviceable sub main wiring complete allas specified anddirected.Note :-(a) Cost for extra length of cables / wire required for connection to MCBs/DBs shall be included in quoted rates.(b). Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates. 177 Material and labour forconcealed submain wiring comprising single core , 3 run of 10 sqmm nominal cross sectional area, FR-LSHmultistrandedcopper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1 run of 10 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earthwirecomplete including taking down old unserviceable sub main wiring complete allas specified anddirected.Note :-(a) Cost for extra length of cables / wire required for connection to MCBs/DBs shall be included in quoted rates.(b). Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates. 178 Material and labour for earthing complete with copper earthplate electrode of size 600 x 600 x 3.15mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to copper strip of size 20 x 3mm earth lead by means brazing after fixing of nuts, bolts, check nuts, washers of galvanised iron steel,protected by HDPE pipe 40mm dia of pressure rating 6 kgf/cm2allas directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 40 x 40 x 6cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel,wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion including taking down old existing unserviceable earthing set complete all as specified and directed.Note:- Strip upto 7.5m length including testing shall be included in quoted rates. 179 Material and labour for earthing continuity conductor or main earthing lead fixed to wall or recess or chases with20 x 3.15 mm copper strip fixed on porcelin insulator at distance 100 cm including nut bolt drilling hole etc ncluding taking down old existing unserviceable earthing strip complete all as specified and directed.Note : Joining of copper strip shall be made by brazing after fixing of nuts & bolts. 180 Supply and fix in repair LED street light fitting 35 Watt, 230 volts made with pressure die cast housing with toughened glass with high powered LED, IP-66 protection high power LED with secondary lenses and system efficiency should be minimum 110 lumen per watt. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection device, THD shall be <10%, power factor >.95, CCT 5700K and brand name should embossed/engraved on the LED fitting for traceability till life complete all as specified and directed. 181 Material and labour for taking down existing cable of 70/95/120 Sqmm size from the panel and reconnection of the same as per direction of Engineer-in-Charge complete all as specified and directed. 182 Supply and fix in repair street light bracket made of 1.5 RM length of GI pipe of light grade of 40 mm dia in proper shaped, bend, threadedand drilling holes for wire entry and MS clamps made of 40x5mm (02 Nos) with nut & bolts of suitable size in proper shape cmplete all as specified and directed. 183 Taking down electric meter from inside room and refixing the meter with necessary electrical connection near main door in proper mannar including thermoplastic polystrene of IP 65 single metering cover wall mounted of size 217x253x115 mm with transparent glass and necessary fixing nut bolt and clamp for intallation of single/three phase meter including connection & suitable writing of Qtr Number on meter Box by paint complete all as spcified anddirected 184 Material and labour for complete removal of existing treatement of old decorated steel surface (inner & outer surface) of existing indoor panel of size 1.50 x 1.00 x 0.30 meter and applying two coats synthetic enamel paint over one coat of red oxide zinc chrome primer by spray painting including preperation of surface complete all as specified and directed. 185 Taking down electric water heater from bathroom room and refixing the same after finishing of bathroom with fixing nut & bolt if required complete all as spcified anddirected.Note - Contractor kept the water heater in safe custody for reuse and if any damaged found contractor replaced with new one without any extra cost.
Contract Date: Mar 12, 2026 Contract Value : 1.49 Crore
Statutory Bodies & Commissions/Committees No of Bidders 7
West Bengal View Result →
32.
Defence #9639063 AOC
REPAIRS TO DRAINS, CULVERT, GRILL GRATING, MS RAILING AND OTHER PETTY REPAIRS AND REPAIRS TO PLUMBING SERVICES AND MISC SANITARY WORKS FOR PT/ TY BLDGS AT COMD HQ INCL ANC CAMP, INS JARAWA INCL MT, NDV, ODV, KUMARKHETI INCL INWTC AND ZEPHYR UNDER GE HADDO, SRI VIJAYA PURAM; 1 Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in hard/dense soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm onplan and getting out complete all as specified and directed 2 Returning filling in hard/dense soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed 3 Removing excavated material (any type of soil) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed 4 M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations or mass concrete complete all as specified and as directed 5 M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole including necessary formwork complete all as specified and directed 6 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stoppedends etc complete all as specified and directed 7 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed 8 M&L for nominal mix RCC 1:1.5:3 type A1 (using 20mm graded crushed stone aggregate) inslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajja/facia and the like complete all as specified and directed 9 M&L for nominal mix RCC 1:1.5:3 type A1 (using 20mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed 10 M&L for nominal mix RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) in Walls, retaining walls, basement walls, ballast walls and the like, any thickness; above top of footings, including attached pilaster and buttresses complete all as specified and directed 11 M&L formwork for rough finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed 12 M&L formwork for rough finished flat surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed 13 M&L formwork for rough finished flat surface to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter complete all as specified and directed 14 M&L formwork rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n. exc 10 cm wide complete all as specified and directed 15 M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed 16 M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed 17 Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed 18 S&Fframed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works like cooler stand conforming to Fe-290, Gde -E-165 19 S&F mild steel roof trusses (framed), trrussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A 20 S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed 21 M&L forapplying two coat of synthetic enamel paint over a coat of red oxide primer includingpreparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed 22 Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed 23 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed 24 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, fixed with self tapping screws all as specified and directed 25 Dismantling wood boarding, panels, beams or any description, fixed any position with nails 26 M&L for 18mm thick designed rubco hut rubber wood frame shutter for cupboard, WHB counter cupboard, wall with finish to match all adjoining surfaces including sanding and applying mixture offiller and NCD thinner (Sheenlac make), pasting chalk putty, applying sealer (Sheenlac make) and wall nut colour stainer and finally applying waxpol (Silicon make) complete all as specified and as directed 27 M&L for 30mm thick rubber wood superior quality, chemically pressure treated, egde glued, finger jointed, tongued, grooved as in door shutter and finished with two coats of melamine polish with asian sealer and wood filler over a coat of honey/natural colour wood filler putty for dust free surface etc including preparation and applying three types of sand papers and surface finish to a glossy/ mat finish to match with the adjoining surfacecomplete all as specified and as directed.Make of Rubber Wood members : RUBCO/ India Wood or equivalant 28 M&L for 18mm thick HDF boarding (Fire and water proof) as in cup boards/shutters/racks/shelves exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site complete all as specified and as directed by Engr-in-Charge. Make : bajaj/ Axis/Greenply/ Archidply or equivalent.Note : (i) Cutting edges of cupboard shutter/ shelves to be finished with adhesive edge binding tape all as directed 29 M&L for preparation of new/old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete all as specified and directed 30 S&F stainless steel auto closing hinges of standard size complete all as specified and directed 31 S&F stainless steel 150mm cupboard handles complete all as specified and directed 32 S&F stainless steel 100mm long tower bolts complete all as specified and directed 33 S&F Magnetic door catcher for cup board complete all as specified and directed 34 S&F telescopic ball bearing runners minimum length 400mm(KA 5632) full extension load capacity 45 Kg complete all as specified 35 Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed. 36 M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and settingin cement mortar 1:4 all as specified 37 Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed 38 M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified 39 M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth complete all as specified and directed 40 M&L for applying two coats of oil bound distemper over a coat of average 1mm thick wall care putty to make the surface smooth after complete removal of existing treatment complete all as specified and directed 41 M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of liquid water proofing compound @ 200ml per 50 Kg cement bag, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately) 42 M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed 43 M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed 44 M&L for 10mm thick plaster in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified 45 M&L for preparation of newly plastered ceiling surface and applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty complete all as specified and directed 46 M&L for applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty on ceiling after complete removal of existing treatment complete all as specified and directed 47 Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed 48 M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound all as specified and directed 49 M&L for 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed 50 M&L for chequered cement concrete tiles of size 30cm X 30cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed 51 S&F for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified 52 Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed 53 Taking down Chowkatsexc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed 54 Taking down shutter of any description n. exc 1 Sqm each complete all as specified and directed 55 Taking down shutter of any description exc 1 Sqm but n. exc2 sqm each complete all as specified and directed 56 Taking down shutter of any description n. exc 1 Sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongry complete all as specified and directed 57 Taking down shutter of any description exc 1 Sqm but n. exc2 sqm each and refixing in the same opening including resecuring or easing of door shutters for easy closing/ opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongrycomplete all as specified and directed 58 S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed 59 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded prelam PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheetfor top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing 60 S&F for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed 61 M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, holdfast, slightly rounded or chamfered angles and throatingcomplete all as specified and as directed 62 S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified Make : Green/Century ply 63 S&F 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkhats complete all as specified 64 S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified 65 S&F 100mm size stainless steel butt hinges medium weight complete all as specified 66 S&F 150mm aluminium, anodised, barrel tower bolts of extruded section all as specified 67 S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified 68 S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 69 S&F floor door stopper ofaluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate 70 S&F door seal bottom of width not less than 30mm and length (ranges 500mm to 1200mm) suitable according to door shutter width to protect entry of insects efficiently complete all as specified and directed 71 M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified 72 M&L for anodised aluminium frame for doors, windows, ventilators, partition, wind tie with one or more rebates including joining cleat for fixing etc complete as specified 73 M&L for anodised aluminium door shutters, aluminium section weighing not less than 1.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, tower bolts, anodised aluminium snap beading screws etc complete all as specifiedNote : Supply only floor spring, glass, SS friction hinges,particle board, wire gauze will be measured seperately 74 M&L for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified complete all as specifiedNote : Supply only glass, particle board, wire gauze will be measured seperately 75 M&L for anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/Imax hinges 01 No, hinges type B-21 100mm long 02 Nos suitable handle 01 No per shutter or as required etc complete all as specified Note : Supply only glass, particle board, wire gauze will be measured and paid seperately 76 S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed 77 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone or steel/ aluminium frame concrete or brick surrounds, glazed complete all as specified 78 Supply only figured glass, pin head type sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane 79 Supply only sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane 80 Supply only sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter exc 0.5 Sqm in each pane 81 Supply only sheet glass 5.5mm thick ordinary quality and glazing with aluminium glazing clip in aluminium door/window/ventilator shutter not exc 0.5 Sqm in each pane 82 Supply only 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified 83 Supply only aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples all as specified and directed 84 M&L for aluminium composite panel sheet of 3mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed over framemade up of aluminium hollow section of 25x50mm, 2.0mm thick, duly fixed to wall/ceiling with expansion fastener having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in columns, beams, walls etc complete all as specified and as directed.Note : Necessary scaffolding required for the work upto three storeyed Bldg shall be deemed to include in the unit rate quoted 85 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed 86 S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed 87 S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed 88 S&F in repair PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed 89 S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed 90 S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed 91 S&F in repair PVC (SWR) bend 75mm dia with access door, any radius as required and jointed with approved adhesive complete all as specified and directed 92 S&F in repair75mm outlet dia PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe complete all as directed 93 Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed 94 S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified 95 Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth 96 Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed 97 S&F of 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified 98 S&F in repair aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples all as specified and directed 99 S&F in repair stainless steel IMAX hinges for aluminium window shutters complete all as specified and directed 100 S&F in repair 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified 101 S&F in repair curtain rods 25mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified 102 S&F in repair door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified 103 S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed 104 S&F in repair vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified 105 S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified 106 S&F in repair vitreous china wash down closet pane (Pedestal pattern white) standard size with S or P trap and other connecting items approved brand including fix with white cement complete all as specified Make : Jaquar (Cat Part No : LYS WHT 0314) or equivalent 107 S&F vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified 108 S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed 109 S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections complete all as specified 110 S&F in repair Vitreous China Urinal, half stall type (back or corner wall type), white complete including providing and fixingplugs, bedding urinal against wall in cement mortar 1:2, securing urinal toplug with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed 111 S&F 15mm dia brass CP urinal spreader complete all as specified 112 S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified 113 S&F 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed 114 S&F in repair chromium plated brass shower roses with or without swivel joints square type 125mm size including shower arm complete all as specified 115 S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed 116 S&F in repair Toilet paper holder Make : Jaquar Code ACN-1153N or equivalent model inParryware /Prayag / Gem 117 S&F in repair towel ring round Make : Jaquar AQN -7721 or equivalent model in Parryware /Prayag / Gem 118 S&F in repair 20 mm dia brass stainless steel tubular towel rail D type600mm long complete all as specified 119 S&F in repair tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and as directed Make : Jaquar Cat Part No AQN-7711 120 S&F in repair chromium plated soap dish of size 120x80mm, fixed to plugs with chromium plated brass screws complete all as specified 121 S&F in repair 15mm dia cast copper alloy chromium plated long body bib tap fancy type with wall flange complete all as specified 122 S&F in repair bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed Make : Jaquar Cat Part No CON-107KN 123 S&F in repair two way bib cock, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified 124 S&F in repair 15mm dia cast copper alloy, chromium plated pillar tap long body swan neck type with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified 125 S&F in repair 15mm Stop valve angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified 126 S&F in repair angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions complete all as specified and as directedMake : Jaquar Cat Part No CON-053KN or equivalent in Prayag / Leader / ZOLOTO 127 S&F in repair 15mm concealed type angle cock cast copper alloy,fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified 128 S&F in repair WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed Make : Jaquar Cat Part No CON-167KNB equivalent in Prayag / Leader / ZOLOTO 129 S&F in repair CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg and wall flange complete all as directed. Make : Jaquar Cat Part No : CON-281KN or equivalent model in Parryware/Prayag / Gem 130 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified 131 S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified 132 S&F in repair 100mm size, 4 levers brass mortice lock, vertical type complete all as specified 133 Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed 134 M&L 14-16mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 135 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed 136 M&L for light shade vitrified ceramic tiles minimum 8mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed 137 M&L for light shade vitrified ceramic tiles minimum 8mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm (600x600mm) in vertical surfaces such as skirting, dados and riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3 complete all as specified and directed 138 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed 139 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.36 Sqm in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3 complete all as specified and directed 140 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed 141 M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed 142 M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and directed 143 Dismantling of wallandceilingboards(fibre, pulp, insulation etc) or insulationboards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed 144 M&L anodized aluminium snap grid framework incl 4 mm thick non asbestos fibre cement building boards 600x600mm incl two coats OBD and preparation of surfaces over boardinserted to framework with screws with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed 145 M & L for seamless gypsum board false ceiling 12mm thick including for any sunk or raised moulding with 25mm long self drilling/ tapping screws having philipshead with joining compound and 48mm wide fiber tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flangeof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm suspended from soffit at approx 900mm c/c with GI cleats and steel expansion fasteners with and incl ceiling section ( not exc 1.2m length) of 0.55mm thick having kurled web of 50mm an flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting across the intermediate channel at 457mm c/c incl hangers 6mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete and finally applying two coats of oil bound distember with roller finish over a coat of primer complete all as specified and directed.
Contract Date: Feb 06, 2026 Contract Value : 40.92 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 9
Andaman And Nicobar Islands View Result →
33.
Defence #9629532 AOC
Tender For Special Repairs To Bldg No P-Xxiv At Igoe Under Ge Chennai; 2 Demolition of cement concrete (unreinforced) of any description and in any position, sunken floornot otherwise specifically provided complete all as specified and directed 3 M&L for PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate asinpadding on roof slab of requiredthicknessfor levelling the surface of roof slab, finished fair and even complete all as specified and directed. 4 M&L for complete removal of existing roof treatment of any description in patches viz. tarfelt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as specified byManufactures instruction and as directed:-(a) Applying Ist course of 15 mm thick cement screed in CM 1:4 over concrete surface including mixing with water proofing compound @ 200ml per bag of cement .(b)Applying 2nd course of bituminious primer confirming to IS-3384 @ 0.4 litre /sqm over the screed bed.(c)Applying 3rd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180degree and applied at the ate of @ 1.2 kg/sqm.(d) Applying 4th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weightnot less than 150 gms/sqm) laid with 75 mm side overlapand 100 mm overlap by forced / torch application as per Manufactures instructions. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree celiciousand applied @ 1.2 kg/sqm over APP membrane,(f) Applying 6th course of a one coat of solar reflective aluminium paint @ 0.10 Litre / sqm on wall surfacescomplete all as specified and directed.Note:- WPCshallbe measured and paid separately. 5 Taking down of existing the existing water proofing treatment on walls including cement /lime mortar renderingand clenaing the surface with water andapplying 10 mm thick rendering in cement mortar 1:3 mixed with liquid ater proofing compound @ 200 ml per 50kg of cement , cleaning and preparation of newly plastered wall surfaces and applying the following water proofing treatment all as specified by Manufactuers instruction and as directed (a)Applying 1st course of bituminious (oil based) primer confirming to IS-3384 @ 0.4 litre /sqm over the screed bed.(b)Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree celicious and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weightnot less than 150 gms/sqm) laid with 75 mm side overlapand 100 mm overlap by forced / torch application as per Manufactures instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree celeiciousand applied @ 1.2 kg/sqm over APP membrane, (e)Applying 5th course of a one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on wall surfaces complete all as specified and directed. Note:- WPC shallbe measured and paid separately. 6 Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by Engineer-in-charge 7 Dismantling of PGI / CGI / Galvalume sheets of any description asin roof coverings 8 S&F 0.50mm thick corrugated (including coated thickness) pre-colourpre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa asin roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. 9 S&Fmild steel framed brackets of angles or tees with web and flanges cut toshape, drilled and countersunk for screw, including bending andwelding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290 Gde-E-165complete all as specified and as directed 10 S&F Mild teel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410- W(Gde- E-250) quality-Ball as specified and as directed 11 M&L for cutting holes into or through brick / stonewalls but in cement mortar ofsuperficial area n.exc 150sqcm . and making good in cement mortar 1:3 or cement concrete 1:2:4 type Bl as required complete all as secified. 12 M&L for cutting chases, pinning in brick / stone wall not exceeding 10 cm girth for concealed water tubing or conduit wiring ,making good andpointing in cement mortar 1:3 complete all as specified and directed. 13 Supply and layingCPVC pipeSDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete with all pipe fittings including taking up or down the existing pipe line of any description completeall as specified for following sizes:- 14 20mm outer dia bore 15 25mm outer dia bore 16 32mm outer dia bore 17 S&F in repairs vitreous china wash down water closet pan, dual flush system cascade type selected colour with built in cistern floor /wall mounted type with Por S trap and matching seat cover including all fittings all as specified and directed by Engineer-in-Charge. 18 S&F in repairs vitreous chinawash basin of oval counter foul type including fitting inside granite platform, includingwaste coupling, waste pipe and brackets etc completeall as specified and directed.Note: The RCC slab and granite platform shallbe measured and paid separately under relevant item. 19 S&F in repairs 15mm diaBib taps cast fancy type, chromium platedwith crutch or butterfly handle, screwed for iron pipe or for brass ferrulefor fancy type Chromimum platedcomplete all as specified and directed.Make:Jaquar 20 S&F in repairstwo waybib tap 15 mm bore chromium plate with crtuch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union complete all as specified and directed. Make:Jaquar 21 S&F in repair 15mm dia CP bib cock nozzle with flange (washing machine tap) complete all as specified and as directed. Make:Jaquar 22 S&F in repairs 15 mm diapillar tap mixerfor both Hot and Coldlong neck with aerator fancy type cast copper alloy with crutch handle screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe or for brass ferrule etccomplete all as specified and as directed.Make:Jaquar 23 S&F in repair wall mixer 2-in-1 system with provision for over head showercomplete all as specifed and directed.Make:Jaquar 24 S&F in repairs health faucet , hand shower with 1 metreflexible tube with wall hookchromium platedcomplete all as specified and directed.Make:Jaquar 25 S&F in repair angular stop cock 15 mm dia brass chromim plated fancy type with long shank, screwed down high pressure with crutch or butter fly handle screwed down both ends for iron pipe or for unioncomplete all as specified and directed.Make:Jaquar 26 S&F in repair over head shower rose & shower arm with revolving joint of size100mmdia round shaped single flow, ABS body chromium plated complete all as specified .Make:Jaquar 27 S&F in repair toilet paper holder with flap recessed type matt chromium plate complete all as specified .Make:Jaquar 28 S&F in repair soap dish, matt finished chromium plated (MCH /Colour CP)complete all as specified Make:Jaquar 29 S&F in repair corner glass shelf 300mm, matt finished, chromium plated (MCH/Colour CP) with bracketcomplete all as specified and directed.Make:Jaquar 30 S&F in repair towel ring round with round flange chromium platedcomplete all as specified Make:Jaquar 31 S&F in repairs towel rail 600mm long with flanges, chromium plated complete all as specified Make:Jaquar 32 S&F in repair cabinet mirror of size 330 mm X 430 mm with shelfscomplete all as specified and directed.Make:Jaquar 33 S&F in repairs looking mirror of size 600mm x 450mm , bevelled edgeon selected quality mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and framed with aluminium channel all round etc., complete all as specified 34 S&F in repair tumbler holder chromium platedcomplete all as specified Make:Jaquar 35 S&Fin repairs Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs washers and wastes, including beading in cement mortar to dwarf wallincluding fixing cantilever brackets and connecting union to pipe overll size 915mmx460mm bowl size for 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete all as speciifed .Make : NIRALI/JAYNA/DIAMOND/ PARRYWARE 36 S&F in repair 15 mm bore sink cock with swinging spout wall mounted model with wall flange complete all as specified and directed. Make:Jaquar 37 S&F in repairs 15mm PVC connection 450mm long of superior quality as specified. 38 S&Fin repairs PVC waste pipe for wash hand basin of size 32mm dia , 800mm lengthcomplete all as speified and directedMake : Prayag 39 S&Fin repairs PVC waste pipe for Sink waste pipe of size 38/40mm dia,1150mmlength complete all as specified and directedMake : Prayag 40 S&F in repairCP cockroach trap (127mmx127mm) with waste hole/with out waste hole of Make Prayag all as specified and directed. 41 S&F in repair Stainless steel plate rack of size 24X36X10fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface complete all asspecified and directed. 42 S&F in repair Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 25 mm dia bore pipes 43 S&F in repairs rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position of 1000 litrescapacity including20 mm ball PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 44 S&F in repairsPVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to wallcomplete all as specified 45 S&F in repairs PVC (SWR) pipes 110mm diasingle socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified 46 S&F in repairs PVC (SWR) pipes 75mm diasingle socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified 47 S&F in repairsPVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to wallcomplete all as specified 48 S&F in repairs PVC (SWR)bend with access doorof any radius of 75mm dia 49 S&F in repairs PVC (SWR)bend with access doorof any radius of 110mm dia 50 S&F in repairs PVC (SWR ) vent cowlof 110mm bore 51 S&F in repairs PVC (SWR ) vent cowlof 75mm bore 52 S&F in repairs PVC (SWR) branch piece, double Y equal or unequal 110mm bore with access door 53 S&F in repairs PVC (SWR) branch piece, double Y equal or unequal 75mm bore with access door 54 S&F in repairs PVC (SWR) junction double,double T equal or unequal 110 mm bore with access door 55 S&F in repairs PVC (SWR) junction double,double T equal or unequal75 mm bore with access door 56 Dismantling floor, hearth or wall tiling including cement mortar bedding / existing backing coat andremoving serviceable tile to store and rubbish off the premises complete all as specified . 57 M&L for Virified ceramic light coloured double charged tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm of approved patternasin floors etc. set and jointed in neat cement slurry and pointed incoloured cement to match with the colour of tileover and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. 58 M&L for Virified ceramiclight coloured double charged tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm of approved pattern on vertical surfaces of wall such as dado,skirtingetc. set and jointed in neat cement slurry and pointed in coloured cement to matchwiththe colour of tileover and including backing coat in cement mortar 10mm thick 1:3 on fair faces of brick or concrete surfaces complete all as specified and as directed. 59 M&L for non skid ceramic coloured joint free tile 7mmto 8 mm thick concept tile, design as approved (sqaure or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqmin floors etcover and including 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed incoloured cement to match with colour of tile completeall as specified and as directed. 60 M&L for glazed coloured ceramic Concept designer tiles of7mm thick and area exceeding 0.11 sqm and not exceeding 0.18 Sqm as approved by GE,fixed in vertical surfaces such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and directed. 61 Demolition of stone slabs and tiles of any description or thickness ,laid bedded and pointed in cement morter as in floors, platforms, aprons etc.complete all as specified. 62 M&Lfor 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement mixed withadmixture of pigment to match the shade of granite stone including grinding and polishing of approved quality ofany sizeset and jointed in greycementslurry laid over and including 15 mm thick screed bed in CM (1:4) includingpolishing the granite stone by using mechanical grinder and moulding edges compete all as specified and as directed. 63 M&L for rounding to edges of stone slabs, such as insteps, cooking platform, and other similar situations. 64 M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified. 65 M&L for Machine cut kota stone slab flooring 20mm to 25mm thick over and including15mm thick cement screed in cement mortar1:4 including pointing, moulding the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of kota stone complete all as specified and directed 66 M&L for Kota stone slab 20mm to 25mm thick asin riser of steps, skirting, dado and pillar laid over and includingrendering 10mm thick in cement mrtar 1:3 including pointing, moulding the edges in white cement 1:2 using marble dust with admixture of pigment to match with shade of kote stone complete all as specified and directed. 67 Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specifed and directed. 68 M&L for 75 mm thick,plain cement concrete1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishingthe surface even and smooth without using extra cement i complete allas specified and directed.Note : concrete shall be laid at a stretch n.exc 3.0 m in length and every turning / corners. 69 Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided complete all as specified and directed 70 S&F Stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. 71 M&L forreinforcedcement concrete 1:2:4type B0using 12.5mm graded stone aggregateas in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves, filling in steel frames and the like complete all as specified and directed.Note:Reinforcement shall be measured and paid separately under relevant item. 72 M&L forMild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified 73 Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 74 Demolition of brick or stone masonry, built in cement mortarof any description including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. 75 M&Lfor brick work with fly ashold sizebricks straight or curved on plan exceeding6m mean radius, built in cement mortar 1:4 complete all as specified and directed 76 M&L for brick work with fly ash bricks stright or curved on plan to any radius, asin half brick thick wall built in cement mortar 1:4 complete all as specified and directed 77 S&F Gl wire netting 0.90mm dia & 12mm mesh in patches of lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting & waste complete all as specified 78 M&L for dubbing out average 15mm thick on irregular face of walls in patches incement mortar1:4complete all as specified and directed. 79 M&L for 15 mm thick renderingon fair faces of brick work or concrete surfaces of wallsin two layers ,first layer with10 mm thick im CM 1:6 and subsequently with5 mm thick inCM 1:4mixed withwater proofing compound as per Manufacturers instruction , finished the surfaces even and smooth without using extra cementcomplete all as specified and directed. Note : WPC shall be measured and paid separately under relevant item 80 M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. 81 M&L for rendering 5 mm thick in cement mortar 1:3 as inceiling surfaces in patches finished the surfaces even and smooth without using extra cement complete all as specified and as directed. 82 Supply only Liquid water proofing compound Make : SIKA / FOSROC / CHOKSEY 83 M&L for preparation of new plasteredsurfaces of wall and applying plaster of paris putty of 1 mm thickness over a coat of primer over newly plastered surface ,finished even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as per Manufacturers specification and as directed. 84 M&L for complete removal of existing treatment ofold surfaces of wall and applying plaster of paris putty of 1 mm thickness over coat of primer over the preparedsurface ,finished even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as per Manufacturers specification and as directed. 85 M&L for preparation of new plastered surfaces of ceiling and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of primer complete all as per Manufacturers specificationand directed. 86 M&L for complete removal of existing treatment of any description from surfaces of ceiling and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of primer complete all as per Manufacturers specificationand directed. 87 M&Lfor applying two or more coats of 100% premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls complete all as specified and as directed .Make: APEX ofAsian or other equivalent make of shalimar / Nerolac/ Berger. 88 M&L for complete removal of existing treatment of any description andapplying two or more coats of 100% premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces complete all as specified and as directed Make: APEX ofAsian or other equivalent make of shalimar / Nerolac/ Berger. 89 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc. complete all as specified 90 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc complkete all as specified 91 Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.4.0 sqm but not exc 7.5sqm each including separating guard bars/grills/wire mesh etc complete all as specified 92 Taking down shutters of any description exc. 1sqm but not exceeding 2sqmeach including builders hardware complete all as specified . 93 S&F second class hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed. 94 S&Fpressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. 95 S&F pressed steel frames of size 125mm x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. 96 M&L for plain cement concrete1:2:4 type B0 using12.5 mm graded crushed stone aggregates asinlintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throatingcomplete all as specified and directed. 97 S&F35mm thick second class hard woodglazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. withsash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats completeall as specified and as directed. 98 S&F plainframed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces ,second class hard wood rail & style of size all as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated completeall as specified and as directed. 99 S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metredcut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed. 100 S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed. 101 S&F Butt hinges, 100mmsize extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 102 S&F Butt hinges, 100mmsize medium weightcold rolled mild steel 103 S&F Aluminium anodisedbarrel tower bolts of extrudedsection 150mm long 104 S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm long 105 S&F Aluminiumhandlescast typeanodised 125 mm size 106 S&F Aluminiumhandlescast typeanodised 150 mm size 107 S&F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. 108 S&F mild steel 300 mm , ordinary rat rail rod pattern springs including rollar and rollar plate complete. 109 S&F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed infloor. 110 S&FAluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames all as specified 111 M&L forpreparation of new wooden surfaces of any description exc. 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primercomplete all as specified 112 M&L forpreparation of new steel surfaces of any description exc. 10 cm in width or girth andapplying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified. 113 S&F aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors / windows / ventilator / partition includingglassing clips with one or more tracks andjoining cleats for fixing and other accessoreies as requiredcomplete all as specified and directed by Engineer-in-Chage . 114 S&F aluminium powder coated sliding window (for width 1.00 above and openable for below 1.50 M width)using alumimium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters includingaluminium anodised snap beads, screws andfixed alongwith same sectionin three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wiremesh shutters etcincludingfixings of all builders hard ware such as wirmesh ,hinges, bow handles, locking arrangements etc complete all as specified and directed by Engineer-in-Charge. 115 S&F aluminium powder coatedventilators using alumimium section weighing not less than 0.48 Kg per RM for frame louversaluminium anodised snap beads, screws andfixed alongwith with 5mm thick frostes/pin headed glass fixed with glazing clips, and one for wiremesh shutter fixed on frame includingfixings of all builders hard ware such as wirmesh ,hinges, bow handles, locking arrangements etc complete all as specified and directed by Engineer-in-Charge. 116 S&Fmild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. 117 S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane fixing to aluminium frame work including hacking out old broken glass (any thickness, size, quality or description ) from Aluminium section fixed with beads/glazing clipscomplete all as specified 118 S&F in repairs 12mm thickplywood, grade BWR,fixed with screws to timber frame worktype BB with decoraive laminate type1 0.90mm thick of surface finish colour and pattern as approved and other side white lamination type 1 0.5mm thick fixed with approved adhesieve as per manufacturers instructions complete all as specified 119 S&F in repairs 18 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed. 120 S&F6mm thick external teak wood lipping over 18/19mm thickparticle board/plywood fixed with nails 121 S&F continous (piano)hinges mild steel,bright finish or electro galvanised width of flaps (when open) 30mm complete all as specified . 122 S&Fin repairsLocks, drawer, cupboard shutters grade I, size 75 mm,Brass4 levers complete all as specified 123 S&F in repairs stainless steelcabinethinges /self closing honges (Bombay Hinges) complete all as specified 124 S&F in repairs Magnet closures to cabinet cupboards complete all as specified 125 S&F in repairs stainless steel curtain rodswith L clamps and with suitable globe brackets and brass screws completeall as specified 126 M&L for small articles such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-290 Gde E-165 complete all as specified 127 M&L for preparing small articles such as hold fasts, end of posts etc. of area n.exc 0.1Sqm and treated with Cresote Oil/ black bituminous paintcomplete all as specified 128 M&L preparing of wood and wood based materials, steel, and iron work, new or old and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq m but n exc 0.5 sq m each and treated with tar or coat tar black paint 129 M&L for plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregatefor fixing of hold fast complete all as specified and directed. 130 M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate, as in floor,25mm average thickness , mixed with WPCat the rate of 200ml per bag of cement complete all as specified and directed.Note: Liquid Water proofing compound shall be measured and paid separately. 131 M&L for Plain Cement concrete 1:5:10 type E2 using 40mm graded stone aggregate in mass concrete in sunken floor, bed blcoks,and similar work complete all as specified and directed. 132 M&L for cleaning the surface (for sunken floor portion) with wire brush and washing with hydrocholoric acid to remove dust, dirt, oil grease, loose particle etc and applying a coat of water base acrylic polymer modified MIX GUARD AC or other equivalentmake appoved by GE@ 1kg per sqm as in part A (Powder) and Part B (liquid) in a ratio of 3:1 with and including 20mm thick rendering in CM 1:4 as in sunken floor slab, walls mixed with intergal water proofing compound and finished even and smooth complete all as per Manufactures instruction and all as directed by Engineer-in-Charge. 133 INTERNAL ELECTRIFICATION 134 Taking down carefully copper/aluminium point wiringlight, fan, socket or powercomplete with fittings such as switches, ceiling roses,regulators sockets etcand making good disturbed surfaces of walls, floors to match with the existing surfacecomplete all as specified 135 M&L for point wiring of size 1.5 sqmmwith PVC insulated unsheathed multistranded copper conductor cabel of 1100V grade drawn throughnon metallic rigid PVC conduit including accessories,concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for complete for :- 136 one light point controlled by one switch 137 one fan point controlled by one switch 138 one 3 pin socket outlet 5 amps on the same board controlled by one switch. 139 one 3 pin socket outlet 5 amps on independent board controlled by one switch. 140 one bell/buzzer point controlled by one bell push 141 One light point controlled by two 2-way switch 142 All as peritem No. 131 above butfor One 3 pin socket outlet15 Amps, independent, with 4.0 sqmm cablecomplete all as specified ( for Geyser & Ac) 143 Allas per itemNo 131but for one socket outlet three pin 15amps controlledby one switch, independent board with 2.5 sqmm sizecable complet all as specified 144 S&Fmodular cover plate with frame 1 module complete all as specified 145 S&Fmodular cover plate with frame 3 module complete all as specified 146 S&Fmodular cover plate with frame 4 module complete all as specified 147 S&F modular cover plate with frame 8 module complete all as specified 148 S&F modular switches suitable fortype AC 240V, 6 Amps 1 modulecomplete all as specified 149 S&F modular switches suitable fortype AC 240V, 6 Amps 1 module 2 way complete all as specified 150 S&F modular socketssuitable fortype AC 240V, 6 Amps 2 modulecomplete all as specified 151 S&F modular switches suitable fortype AC 240V, 16 Amps 1 modulecomplete all as specified 152 S&F modular power sockets suitable fortype AC 240V, 16 Amps 2 module complete all as specified 153 S&F modular bell switchsuitable fortype AC 240V, 6 Amps complete all as specified 154 S&F call bell of multi music type A/C 230 voltscomplete all as specified 155 S&F ceiling rose , polycarbonate, isolated bodywith 2 to 3 terminals 156 Taking down ceiling fan and removing blades from fan body and depositing to store yard ofAGE E/M includingconnecting rod, cotter pins and all accessories complete all as specified 157 S&F ceiling fans complete with blades, down rods, electronicregulator (2 Modular)and accessories, 230 V, 1200mm sweep five star rated with brushless direct current (BLDC)motor, complete all as specified and directed. 158 Taking down Exhaust fans and depositing to store yard ofAGE E/Mincludingall accessories complete all as directed 159 S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers ,complete all as specified 160 S&F20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directedMake : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or other equivalent make ofPhilips/Bajaj. 161 S&F 10 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directedMake : Havells Cat No. LUMILINEPLUSBS10WLED865SPCSSIND or other equivalent make ofPhilips/Bajaj. 162 S&F 15 Watts round ceiling COOL LIGHT is a functional range of aesthetically designed surface mounted downlights with aluminum housing and heat sink for better thermal performances, complete all as specified and as directedMake : Havells Cat No. INTEGRANXTRDDLRSURD15WLED865S or other equivalentmake ofPhilips/Bajaj. 163 S&F 10 Watts Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs, Complete all as specified and as directedMake : Havells Cat No. HEXAFT10WLED857SSYMBOPC or other equivalent make ofPhilips/Bajaj. 164 Taking down the existing geyser, refixing the same after all necessary plumbing and electric works done and make necessary repairs if any, complete all as specified and as directed 165 Taking down AC boxany type and any size complete after taking proper disconneting of electric supply properly andmaking good surfacecomplete all as specifided and directed 166 S&F MCB Power unit with 4 module steel box consisting of 3 pin 24 Amps socket with Plug top and MCB SP 25 Amps, suitable for operation of AC & Geysers etc. complete all as specified. Make :- Havells/Legrand/Anchor 167 Taking down sub main wiringany type and any size complete after taking proper disconneting of electric supply properly andmaking good surfacecomplete all as specifided and directed 168 S&F sub main wiringcomplete with two runs of 10 sqmmPVC insulatedunsheathed single core multistrand copper conductorcable (FRLSH) of 1100 volts grade drawnthrough intonon metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceilingwith one run of 10 sqmm PVC insulatedunsheathed copperconductorcable as earth continuity conductor all as specified and directedNote:- Two runs of PVCinsulatedcable 10 sqmmand one run 10 sqmmof earth wire and one run of conduit including accessories shall be measured as one unitlength. 169 Taking down MCBDB any type and any size complete after taking proper disconneting of electric supply properly andmaking good surfacecomplete all as specifided and directed 170 S&F MCB distribution board made of 1.2mm thick special grade CRCA sheet, powder coated with high quiality weather proofing paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 430 Volt 12 way MCB DB , SPN with 200 Amp rated bus bar shall conform to IP 38 protection incluidng taking down the old one complete all as specified and directed by Engineer-in-charge 171 S&F MCB distribution board made ofCRCA sheet, powder coatedpaint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection complete all as specified. 172 Taking down MCBs any type and any size complete after taking proper disconnecting electric supply properly and making good surface complete all as specified and directed. 173 S&F MCB of rating 240 Volts, SPN 63 Amps 174 S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts 175 M&L for earthing complete with galvanisedsteel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified inlcuding testing on completion. 176 S&F LED security light fitting 35 Wattsmade out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V includingbrackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete all as specified and as directed. 177 EXTERNAL WATER SUPPLY 178 M&L for cutting existing GI water tubing in position for insertion of Tee of 80 x 80 x 40 mm sizeto connectGIpipe80 mm dia including necessary earth work excavation complete all as specified and directed 179 Supply and lay galvanised steel water tubing 40mm bore medium grade with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., laid in trenches complete all as specified 180 Supply and lay galvanised steel water tubing 25mm bore medium grade with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc.,fixed complete to walls and ceilings or laid in floors complete all as specified . 181 S&F25mm bore Gun metal globe / Gate valve conforming to IS 778-1984 with iron wheel head, screwed both ends for GI pipe including all fittings/ fixutres like nipple, union etc, complete all as specified and directed. 182 Takingup or down steel tubing and connections of40mm dia from any position completeall as specified 183 Takingup or down steel tubing and connections of25mm dia from any position completeall as specified
Contract Date: Nov 24, 2025 Contract Value : 68.80 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
34.
Defence #9628602 AOC
Tender For Special Repair To Building No P-25 At Certain Location Of Saa Under Ge(S) Tezpur; Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards any thickness, including cover fillets all as directed. S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of truss Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of bed blocks for hold fasts. Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts. S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction. M & L for providing Plain Cement Concrete (1:2:4) type B0 using 12.5mm graded crushed stone aggregate as in copings, in lintels, cills, plinth courses, string courses,lacing courses, parapets water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and directed. Supply and fix, 35 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed Supply and fix 35 mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with sash bars any Number) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh) etc. fitted to chowkhats complete all as specified and directed. (Note : wire cloth wil be measured and paid separately). Taking down and Refixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed. Note: Shutters obtained from Item No 4 above shall be considered for refixing in same opening S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification. S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails,M.S. frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail& bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement,supply and fixing at site as per specifications. S&F Powder Coated aluminium frame (minimum thickness of powder coating 50 micron) (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified S&F Powder Coated aluminium window and ventilator shutters (Thickness or powder coating not less than 50 micron), sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc.complete all as specified. S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised. S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws. S&F extruded aluminium alloy handels fabricated type, anodised, 150 mm long and fixed with screws. S&F MS 200mm ordinary pattern door spring including roller and roller plate S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy. S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples S&F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including petty repairs material like screws/nails, plug, MS fillet etc in Steel windows etc. to make it functional complete all as specified and directed. (Note: Any items required to be replaced shall be paid under respective items). S& F 4.0 mm thick sheet glass plain ordinary quality and glazing with oil putty in squares n. exc 0.5 sq. m in each pane in squares. S& F 4.0 mm thick sheet figured/pin headed glass and glazing with oil putty in squares n. exc 0.5 sq. m in each pane in squares. Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed. M&L for 75 mm thick PCC 1: 3:6 type C2 using 20mm graded crushed stone agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with sealing compound grade A complete all as specifed and as directed. M & L for 25 mm thick B0 PCC 1:2:4 (12.5mm graded crushed stone aggregate) type 1as sub floor , sub base even and rough to recieve the topping layer on roof /floor all as specified and directed Demolition of reinforced cement conc of any description and in any position and removal rubbish off the premises complete all as specified and as directed. M&L for RCC type B1 1:2:4 (20 mm graded crushed stone agg) as slab supported on wall , beams columns in floor, roofs landing and the like M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including crankingbinding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips M&L for Formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) all as directed. Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed. M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed. Material and labour for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed. S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed and removal rubbish off the premises as specified and directed. Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair complete all as specified and directed. Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair complete all as specified and directed. M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed. M&L for three coats of white wash including preparation of new plaster surfaces as in ceiling complete all as specefied and directed. M&L fo one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall. M&L for one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down all as specified and directed M&L for Applying two coats of acrylic distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed. M&L for Applying one coat of Acrylic distemper to old wall surfaces of walls and cornices including preparation of old decorative surface and removal of smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed M&L for Applying two coats of acrylic distemper to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed. M&L for preparation of newly plaster surface and applying two coats of weather coat over 1 mm thick putty to make surface smooth and one coat of primer damp sheild over newely plastered wall complete all as specefied and directed. M&L for Old wall surface including properly preparation/removal of existing paint surface and fillings the cracks with exterior wall care putty and pigment and applying one coat of weather coat water proofing paints as in boundry wall, single , double and triple storey bldg, complete all as specified andas directed by Engineer-in-Charge. M&L for complete removal of existing treatment and applying two coats of weather coat over a coat of polymer (exterior grade) putty to make surface smooth and one coat of primer damp sheild over old plastered wall complete all as specefied and directed. Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed. Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of till laid over and included 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed M&L for Coloured Glazed ceramic tiles 450 x 300 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of till laid over and including 10mm screeding in Cement mortar 1:3 . M&L for 20 mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed. M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed. M&L for Glazed Ceramic tiles 8 to 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm,, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match the shade of till laid over and including 15mm thick screed bed in CM 1:4. All as per item No 56 above but in skirting over 10mm thick screeding in cement mortar 1:3 S & F in repair Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe S & F in repair Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe S & F in repair only 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed. S & F in repair, 15 mm bore bib taps, cast copper alloy,chromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. S & F in repair, stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions including dismantling wall tiles and fixing broken tiles with matching colour, area of wall tiles not exceeding 0.50 sqm. all as specified and directed. S&F in repair 15mm dia angle stop valve fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Supply and fix, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed. Supply and fix, CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including 610 mm long waste pipe etc complete all as specified and directed. Material and labour, in repair for 75/110 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed Supply & fix in repair stainless steel curtain rod of dia 25 mm with fixing brackets,etc. with two Nos of end knobs complete for doors/window opening all as specified and directed M&L for Taking down existing damaged water closet alongwith complete PCC and lime concrete from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and 3mm thick APP based Polymeric membrane with cold cut back adhessive.(iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness. M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. M&L for applying for preparation of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specefied and directed. M&L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint. Supply and fix, in repair, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed. Supply and fix, in repair, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed. Supply and fix, in repair, vitreous china wash basin, white, size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. Supply and fix, in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float 32 mm dia flush pipe and handle including brackets complete all as specified and directed. Supply and fix in repair, 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. Supply and fix, in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed. S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified. Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor incl dismantling all as specified and directed. Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor incl dismantling all as specified and directed. S&F PVC (SWR) with access door bend 110mm dia. S&F PVC (SWR) with access door bend 75 mm dia. S&F PVC(SWR) junction single (single T) equal or unequal 75 mm bore with access door . S&F PVC (SWR) junction single (single T) equal or unequal 110mm bore with access door . S&F PVC (SWR) junction double, (double T), equal or unequal 110mm bore. ISI marked S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed. S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. M&L in repair for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent S&F Solid PVC particle board consisting of 18-20 mm thick prelaminated PVC sheet inclusive of solvent cement and fixing at site all as spacified and directed Supply & Fix in repair CP shower rose 125 mm dia with revolving joints and fixed to15 mm GI pipe or unoin all as directed. S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed. S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed. S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed. M&L for pre cast RCC (1:2:4) type B1 using 20 mm graded crushed stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge. Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for sewage pipe line etc. and getting out in soft/loose soil all as specified and as directed by Engr-in-Charge. Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed. Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed. M&L for Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed. Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly and removal rubbish off the premises complete all as specified and directed M & L for 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm over solvent based bituminous primer @ 0.25 Lit/Sqm. Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capavity on same place with all required necessary fittings complete all as specified and as directed. Note:- The work shall be executed through authorised manufacturer of product. Supply & Fix in repairs Kitchen plate rack made of stainless steel sheet 0.60 mm thick of overall size 750mm X 600mm X 250mm with three shelf complete all as specified and directed. Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed. Taking down main switches and DBs of any type including MCB and make including wooden board / junction box. M&L for concealed point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated suken terminal box made out of MS sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside,(clear depth of the box not less than 60mm and this shall be increased suitably to accomadiate flush type regulators) concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed for the following :- All as per item No. 106 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed. All as per item No. 106 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed. All as per item No. 106 here - in - before but for 5 Amps socket point on the same board controlled by one switch complete all as specified and as directed. Ditto as per Item No 106 above but for one light point controlled by two way switches complete all as specified and as directed. S&F for switch piano (flush button type) single pole, one way, 5 Amps. S&F switch flush type, 5 Amps, SP, two way. Make Anchor S&F switch bell push flush type 5 Amps. Make Anchor S&F for switch socket Combination 2 in one, 5 Amps, 240 Volts flush type, all as specified. S&F for switch socket combination 2 in One , 3 pin 5 Amps & 16 Amps flush type, universal. Supply and fix fan regulator electronic, step type S&F call bell Dingdong type AC 230 Volts single pole. S&F ceiling rose surface backelite three terminals. Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection. All as item no 119 above but LED batten 9 watt 2 ft long S&F Decorative wall light fixture made out of polycarbonate, suitable with 7 watt LED Bulb complete all as specified and directed. S&F on wall security light luminaire for 1x25 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor all as specified. S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed. Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades refixing the fan in same position including all electrical connection and material and labour for replacement of two nos split pins, one connection block and one rubber seal all as specified and as directed. Material and labour for painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamell paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavaties with filler materials,and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc2 cm ) complete all as specified and as directed. Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 12 way with common bus bar at incomming end complete all as specified and directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. S & F MCB C series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed S & F MCB C series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed S & F MCB C series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed S&F metal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm flush to wall including complete electrical connection by proper size of copper lugs complete all as specified. Note- The cost of cutting wall and making good the disturbed surface by Putty and matching the colour of wall shall deemed to be included in the unit price. M&L in repair for sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed FRLSH copper conductor cable, 1100 Volt, and one run of copper earth wire 6 Sq mm drawn through PVC conduit and all accessories,including cutting chases of exsisting wall, making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. dito as item No-132 but 2 x 4 sqmm + 1 x 4 sqmm earth wire M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core. Note: 1. Excavation and earth work will be measured and paid seperately. M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. Supply and laying of well burnt bricks, sub class B laid flat in trenches for protection of cable complete all as specified and directed.
Contract Date: Feb 21, 2026 Contract Value : 32.64 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
35.
Defence #9628552 AOC
Tender For Provision Of Certain Sanctioned Work And Minor Works At Iamoe, Vayu Vihar, Iam Iaf Under Ge (Af) Marathahalli Bangalore- 1 Demolition of cement concrete (un-reinforced) of any description as in, existing roof treatmentconcrete tiles ,oldroofmembrane etc,.any type complete all as specified and directed 2 M & L for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) 40mm thickas in sub base/roof padding concrete in roof etccomplete all as specified and directed. 3 M & L forrendering 10mm thick in CM 1:3 finished even and smooth using extra cement with liquid water proofing compound slab treatment as in sunken slab plaster complete all as specified and directed. Note : Water proofing compound measured and paid seperately. 4 Supply only integralliquid water proofing compound . 5 Taking down cement plaster on brick work or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. 6 M & L for Rendering 15mm thick in CM 1:3 on concrete masonary or surfaces other than fair face of brick work with water proofing compound finished fair and even without using extra cement. ( water proofing compond shall be measured & paid seperately) 7 M & L for cement concrete tiles with grey cement & no pigment, size 25 cm x 25 cm x 22 mm thick machine pressed set jointed and pointed while laying the tiles, care should be taken to see that joints between tiles are kept minimum and joints are thoroughly filled with FOSROC Nitotile grout polymer based joint motor or equivalent products of Asian Paints/SIKA/Pidilite Dr Fixit/Thermax /STP applied as per manufacturers Instruction in floors and cut and polished with grey cement and no pigment over and including 15 mm thick screed bed or bedding layer in cement mortor 1 :4 complete all as specified and directed. 8 Providing and applying HS TPO membrane of 1.2mm thick over the layer of 200gsm Geo-Textile with overlap joints of 75 mm in both longitudinal and transverse direction of the TPO and sealed properly with hot air welding and terminate TPO at the top of parapet wall with terminatin strip and fix it by screw at 300 mm c/c and sealed with HS Jointseal PU on top including surface preparation like remove all loose gravels,dirt,oil,grease,and other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application and PCC / cementitious coving of 75 mm radius shall be provided at all junctions between vertical and horizontal faces before application of TPO completely as per specification and direction.( Note:- work to be carried out by authorities applicator of M/S Asian Paints /STP/SIKAor equivalent company.) 9 S & Fin repairs 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. 10 S&F in repairs32mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. 11 S&F in repairs40mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. 12 Removing of existing water pipe line of 20 mm diasetting aside or lowering if required , and refixing the same into new or exisiting position with suitable clamp or fixing arramgements complete all as specified and directed. 13 Removing of existing water pipe line of 25 to 32 mm diasetting aside or lowering if required , and refixing the same into new or exisiting position with suitable clamp or fixing arramgements complete all as specified and directed. 14 S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 1000litre capacity and fixed in position all as specified in SSR Part including dismantling old water tank1000 litre capacity and removing to store complete all as specified and directed. Make : SintexPolycon, Rotex 15 S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 500litre capacity and fixed in position all as specified in SSR Part including dismantling old water tank500 litre capacity and removing to store complete all as specified and directed. Make : SintexPolycon, Rotex 16 Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in exisiting/ newposition complete all as specified and directed. 17 S & F in repairs 40 mmouter diaball/gate valve screewd both ends for CPVC pipes and fixed complete all as specified and as directed 18 S&F in repairs 32 mmouter diaball /gate valve for , screewd both ends for CPVC pipes and fixed complete all as specified and as directed 19 S & F in repairs Ball valves high 25mm borepressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) 20 S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed. 21 S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilingscomplete all as specified and directed. 22 S&F in repairs PVC bends of 110 mm dia complete all as specified and directed. 23 S&F in repairs PVC bends of 75 mm dia complete all as specified and directed. 24 S&F in repairs PVC (SWR) floor trap, plainwith grating including jointing with solvent cement bends of 75 mm dia complete all as specified and directed. 25 M&L for Pre-cast cement concrete block masonry type C1, mix 1:3:6 (using 20 mm graded stone aggregates) with solid blocks, exc.10cm in width and setting in mortar including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directedcomplete in CM 1:6 all as specified and directed. 26 Demolition of Concrete of any description (reinforced) and in any position not otherwise specifically provided for all as specified. 27 M & L PCC Coping Type B0, mix 1:2:4 (using 12.5 mm graded stone aggregate )in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork, as directed 28 Material and Labour for rendering 15mm thickin CM 1:4 on brick or cement concrete surfaces & finished even and smooth without using extra cement complete all as specified and directed. 29 S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 30 M & L for preparation of newsteel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. 31 Excavating in trenches in Hard/dense soilnot exc 1.5 meter wide and not exc 1.5 meter depth for foundation etc and getting out complete all as specified and directed. 32 Returning, filling in, including spreading, levelling, watering & well ramming in layers n.exc 25cm in Hard/densesoil. 33 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point. 34 M&L for Hardcore of gauge n exc. 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 35 M & L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in Sub base forconcrete. 36 M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than .034 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:4 complete all as specified and directed . 37 M&L for Kota stone slab 20-25mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10 mm thick CM (1:3) to receive Kota Stone complete all as specified and directed 38 M & L Joist, channel, angle, tubes or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) ®c complete using EWR or inducton butt welded tubes conforming to Fe410-W (Gde- E-250) quality Acomplete all as specified and directed. 39 M & L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete ll as specified and directed 40 M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed. 41 S & F Welded steel wire fabric n exc 4 kg per sqmtrfixedto wood or steel members by welding or screwing by using clamps hooks, self tappinf screws all as specified and directed. 42 S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified and directed. Note:- The profile of sheet shall be as per sample kept in GEs office. 43 M&L for 1:3:6 type C1 with 20mm graded stone aggegate Pre-cast cement concrete block masonry with solid blocks, exc.10cm in width and setting in mortar 1:6 complete all as specified and directed. 44 M & L for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron )having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over wall surfacesover a coat of alkali resistant primer complete all as specified and as directed. 45 M & L Preparation of new plastered surface andapplying two or more coats of 100% premium acrylic emulsion paint ( 200 micron )having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over wall surfacesover a coat of alkali resistant primer complete all as specified and as directed. 46 M & L for Complete removal of existing treatment of wall surfacesincluding washing, rubbing down and stopping of distempered surfaces and applying two coat of oil bound distemperover 2 to 3mm thick wall care putty complete all as specified & directed. 47 M & L 50 mm thick precast cement concrete louvres and jallies,of any approvedpattren, design ,Type B0 (mix 1:2:4)using 12.50 mm graded stone agregates,set in CM 1:4 (measured solid), including all mouldings fixing with self adeshive cement , filling up joints with appropriate items to match existing surface, complete all as specified and directed. 48 Demolition of unreinforced cement concrete in ground floors etc and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed 49 M&L for 25mm thick (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as in level course of flooring complete all as specified and directed . 50 M & L vitrified ceramic tiles coloured pattern as required (Dark shade) 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and includinglaid over15 mm thick screed bed in CM 1:4 compete all as specified and directed . 51 All as per item No. 50 above but on skirting over 10 mm thick backing coat in CM 1:3including dismantling of tiles complete all as specified and directed . 52 S & F in repairs20 mm CPVC PipeSDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenchesor fixed to wall/Ceilingcomplete all as specified and as directed 53 S&F in repair 15 mm aerated bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. 54 S & F 12mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605 mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden/steel/concretesurface/ member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete with and including dismantling ceiling baords of any description of any thickness incl cover fillets complete all as specified and directed . 55 Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roofceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed. 56 M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC casing& caping of suitable size, complete with all PVC casing &caping accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc,including all cutting/chases etc in wallsand including continuousearth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:-(a)One light point controlled by one switch. 57 Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed 58 Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed. 59 M & L for18 to 20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado or cooking platform, similar worketclaid over cement screed bed 15 mm thick in CM 1 : 4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. 60 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations 61 Dismantling of floor hearth or wall tiling, terrazo tiles of anmy thickness including cement mortar bedding (but not backing) removingtilesand rubbish off the premises. 62 M & L for glazed ceramic coloured tiles with border tile pattern in vertical surfaces350 x 250x 7 mm / 450 x350 x7 mm / 300 x 450 x 7 mmthick , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10 mm thick cement plaster in 1:3 as backing coat complete all as specified and as directed. 63 M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick of size 300mmX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15 mm thick in 1:4 complete all as specified and as directe. 64 S & F in Repairs Vitreous China half stall urinals,(back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) 65 Taking down chowkhats or frames with shutters (without taking offshutter from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed . 66 S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. 67 S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. 68 Taking down steel windowscompletely of size not exc 1.00 Sqm each 69 S & F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 70 S & F Powder coatedAnodised aluminium window and ventilator shutters, fixed type three track windows two glass and one wire mesh shutterwithout sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified Note : Glass pane and SS wire mesh shall be measured and paid separatelyin supply only item. 71 Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed 72 Supply only4mm thick figured galss, pin head typeasin louvers, fixed glazing not exc 0.5 Sqm in each pane 73 S & F of 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed. 74 Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified 75 Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized all as specified 76 S & F PVCwaste pipe, 32 mm dia,750mm long, suitable for Kitchen sink,fixed in repairs all as specified and as directed. Make :Jaquar , Hindware. Cera, Parryware 77 S & F in repairsBib taps,CP brass, fancy type, long body with flange,screwed down, screwed for 15mm bore iron pipes or brass ferrule, fixed in repairs, all as specified and as directed. Make :Jaquar (CAT PartNo COP-107PM ), and equivalent of Hindware. Cera, Parryware 78 S&Fin repairs fancy type CP brass angle cock of brass chromium plated with ling shank screwed for pipe and fixed 15mm bore fixed to iron pipen all as specified Make :Jaquar (CAT Part No COP-057PM) and equilent of , Hindware. Cera, Parryware 79 S & F in repairsHealth faucet, CP,with 1.5 metre flexible tube with wall hook, (ABS body) 8 mm dia spirochrome flex tube & wll hook,all as specified and as directed. Make :Jaquar (CAT Part No ALD-587) or equivalent of , Hindware. Cera, Parryware 80 S & F in repairs CP brassAerator Pillar taps brass chromium plated, fancy type/swan neck typefoam flow,screwed down high pressure screwed for iron pipe 15mm bore, fixedall as specified and as directed.Make :Jaquar (CAT Part No COP-011PM) or equivalent ofHindware. Cera, Parryware 81 S & Fin repairs S/S Toilet paper holderwith flat recessed type complete all as specified. Make :Jaquar , Hindware. Cera, Parryware 82 S & Fin repairs brass chromium platedtubular towel rail 20mm dia D type60cm ling between flanges complete all as specified and directed.Make :Jaquar , Hindware. Cera, Parryware 83 S&F in repair CP towel Ring Square with Round Flange, Cat Part No-ACN-1121N, complete all as specified and directed . MAKE:- JAQUAR 84 S&F in repair CP Soap DishHolder, Cat Part No-AKP-35731P, complete all as specified and directedMAKE:- JAQUAR 85 S & Fin repairs Mirror cabinet 622x422mm all as specified and as directed.Make :Jaquar , Hindware. Cera, Parryware 86 S & F in repairssheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brakcet guard and railing 60cm long complete all as specified and directed. Make :Jaquar , Hindware. Cera, Parryware 87 S & Fvitreous china wall hung WHB with fixing accessories of size560x415x200mm Jaquar CAT Part No CNS-WHT-801)with CP brass waste coupling, Jaquar (CAT PART No ALD-705) , waste pipe andfull Pedestal(jaquar (CAT Part No -WHT-301 )all as specified and as directed. Make :Jaquar , or equient of Hindware. Cera, Parryware 88 S & F in repairs Vitreous china wash down water closet pan (pedestal pattern), white, complete with trap, fixed to floor with fixing bolts and seat cover,including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc., including making good to floorcomplete,including fixing of PVC flush tank and seat cover as specified and as directed. Make :Jaquar , Hindware. Cera, Parryware 89 Supply only Plastic water closet seat cover any colour, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed allas specified and as directed. (Note: Seat cover make should be same as of WC make)Make :Jaquar , Hindware. Cera, Parryware 90 Supply only PVC low level flushing cistern, 10 litres capacity,with chromium plated brass inlet and outlet connections including provision of PVC brackets, PVC flush pipe with bend 32 mm dia of suitable length and making necessary connections to water supply pipe line all as specified and as directed. Make :Jaquar , Hindware. Cera, Parryware. 91 S & F PVC connections 600 mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs,all as specified and as directed. 92 S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. 93 S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed. 94 S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and directed. 95 S&F in repairs PVC (SWR) junction(Double T) equal or unequal fixed to 75mm bore of pipes with access door all as specified and as directed. 96 S&F in repairs PVC (SWR) junction(Double T) equal or unequal fixed to 110mm bore of pipes with access door all as specified and as directed. 97 S & F Stainless steel gratings with frame, 100 mm dia,with/withouthole for waste pipe connection all as specified and as directed. 98 S&F in repairs PVC (SWR)vent cowl fixed to 110mm bore of pipes all as specified and as directed. 99 S&F in repairs PVC (SWR)vent cowl fixed to 75mm bore of pipes all as specified and as directed. 100 M&L for preperation of newly plastered surfaces of wallsand applying two coats of oil bound distemper on wall surfacesover a coat of alkali resistant primer over 3 mm thick wall care putty complete all as specified and directed. 101 S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers
Contract Date: Feb 21, 2026 Contract Value : 25.58 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
36.
Defence #9605508 AOC
Tender For Special Repair To Bldg No Bj/8, Bj/10 And Bh/1 At Albert Ekka Enclave Under Ge Panagarh; 2 Taking downcement plaster ofany description from brick wallsurfaces etc including racking out joints and hacking for key, scrubbing down with water etc., complete all as specified and directed. 3 M&L Rendering 10 mm thick cement plaster in Cement Mortar 1:6 on other than fair faces of brick/concrete work surfaces finished even and smooth (without using extra lime or cement) including taking down old unserviceable cement plaster, complete all as specified and directed. 4 M&L Rendering 15 mm thick cement plaster in Cement Mortar 1:4 onfair faces of brick/concrete surfaces with finished even and smooth without using extra cement and using water proofing compound admixture as per manufacturers instruction including taking down old unserviceable cement plaster, complete all as specified and directed.[Note : WPC will measuered and paid separatly under relevant item of schedule.] 5 M&L Rendering 10mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3finished even and smooth (without using extra lime or cement) with chicken wire mesh, complete all as specified and directed. 6 Supply only liquidwater proofing compound, complete all as specified and directed. 7 M&L TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed)not less than 0.90mm dia or securing with clip, complete all as specified and directed. 8 M&L TMT mild steel bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed)not less than 0.90mm dia or securing with clip, complete all as specified and directed. 9 M&L Reinforced Cement Concrete (design mix), M-25 (using 20mm graded stone aggregate) as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. including demolition of old unserviceable Reinforced Cement Concrete, complete all as specified and directed. 10 M&L Reinforced Cement Concrete (design mix), M-25 (20mm graded aggregate) for chajjas including demolition of old unserviceable Reinforced Cement Concrete, complete all as specified and directed. 11 Use and waste of Formwork to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works not exceeding 200mm thick (horizontal or sloping), surface of concrete flat for rough finished surface of concrete, complete all as specified and directed. 12 Use and waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges etc surface of concrete flat with fair finished surfaces, complete all as specified and directed. 13 M&L 75mm Plain Cement Concrete 1:3:6 type C1 (using 20mm graded stone aggregate) fininshed the as in plinth protection surfaces even and smooth without using extra cement, including demolition of old unserviceable Plain Cement Concrete, complete all as specified and directed. 14 M&L forming construction joint 30mm deep X 10mm wide with sealing compound grade A, complete all as specified and directed. 15 M&L in repairs providing plain cement concrete, type B0, 1:2:4 (using stone 12.5mm graded aggregate) as in coping to chajja tops and all other similar works, complete all as specified and directed. 16 M&L (a) providing and laying water proofing treatment of sunken portion of WCs, bathroom incl by taking out/demoliton/dismantling of old unserviceable peeled/leaking sunken floors etc & applying cement slurry with acrylic based modified cementitaous composite compound coating of make as approved in technical instruction 5/2003 (b) First layer of slurry of cement @ 0.5 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) second slurry of cement @ 0.500 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (d) 200 micron thick polythene film pasted with the help of bituminous adhesive shall be provided over treatment. (e). Plain Cement Concrete in 1:5:10 using brick aggregate as in filling of sunken floors, complete all as specified and directed. 17 S&F in repairs vitreous China squatting pan, Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including trap set in and including concrete, complete all as specified and directed. 18 S&F in repairs vitreous china wash down closet pan white, pedestal pattern pedestal pan and trap (excluding flushing cistern and flush pipe), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device including CP jet spray, complete all as specified and directed. 19 S&F in repairs vitreous China wash basin white, flat back,size 550X450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for pinning in ends of brackets or erecting stand including waste pipe, complete all as specified and directed. 20 S&F in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets), incl flush pipe of plyethene of low or high density of PVC 32mm dia for low level cistern, complete all as specified and directed. 21 S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. 22 S&F in repairs 15mm bore, fancy type, stop valve/angle cock (multiple) , chromium platedconcealed type cast copper alloy, screwed down , high pressure , with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. 23 S&F in repairs PVC connection 15mm size PTMT nuts of length 450mm, complete all as specified and directed. 24 S&F in repairs 15mm bore long neck pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred HOT or COLD with long screwed sunk and fly nuts, complete all as specified and directed. 25 S&F in repairs bib taps, cast copper alloy 15mm bore long neck body with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 26 S&F wall mixer chromium plated, 3 way including telephonic shower arrangement with connecting legs, wall flanges & wall bracket for hand shower, complete all as specified and directed. 27 S&F as in chromium plated grating, square with waste hole, 150mm size of PTMT(minimum 100 gms), complete all as specified and directed. 28 S&F in repairs 600X450 mm bevelled edge mirror of selected quality glass, mounted of 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup, complete all as specified and directed. 29 S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40mm dia PVC waste pipe, complete all as specified and directed. 30 S&F in repairs tubular towel rail brass chromium plated 20 mm dia `D type 60 cm long between flanges, complete all as specified and directed. 31 S&F in repairs chromium plated shower roses 125 mm longwith or without swivel joints, any size, including fixing fixing to steel pipe or union, complete all as specified and directed. 32 S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. 33 S&F in repairs glass corner shelf with SS guard and railing (size- 200mm x200mm) for bathroom, complete all as specified and directed. 34 S&F in repairs stainless steel kitchen plate rack made out of 0.65mm thick of approved make with plugs, washers, over all size 786mmx610mmx254mm, complete all as specified and directed. 35 M&L 25 mm thick Plain Cement Concrete 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes,including dismantling of old unserviceable Plain Cement Concrete complete all as specified and directed. 36 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:6, including dismantling of old unserviceable floor hearth & wall tiling, .complete all as specified and directed. 37 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqmon vertical surface such as skirtings etc. set and jointed in cement slurryover 10 mm thick rendering in Cement Mortar 1:3including dismantling of old unserviceable floor hearth & wall tiling, complete all as specified and directed. 38 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:4including dismantling of old unserviceable floor hearth & wall tiling, complete all as specified and directed. 39 M&L Glazed ceramic tiles Coloured 300x450mm 7 to 8 mm thick in wall/dado etc, set & jointedin neat cement slurry & pointed in white or coloured cement to match renderingover 10 mm thick in Cement Mortar 1:3 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfacesincluding dismantling of old unserviceable floor hearth & wall tiling, complete all as specified and directed. 40 M&L 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite of any type of workincluding dismantling of old unserviceable stone work, complete all as specified and directed. 41 M&L 18 to 20mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills,bathroom corners cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shadeincluding dismantling of old unserviceable stone work, complete all as specified and directed. 42 Rounding to edges of stone slabs exposededge, such as in steps, cooking platform and othersimilar situation, complete all as specified and directed. 43 M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete lad over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in Cement Mortar 1:6 for laying floor finishincluding dismantling of old unserviceable stone work, complete all as specified and directed. 44 M&L Kota stone slab 14-16mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 1.042 above over 10mm thick in cement mortar Cement Mortar 1:3 including dismantling of old unserviceable stone work, complete all as specified and directed. 45 Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed. 46 Taking down of chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from frames), complete all as specified and directed. 47 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.[Note : (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus side shall be acceptable but no extra payment on this account shall be made.] 48 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.[Note : (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus side shall be acceptable but no extra payment on this account shall be made.] 49 S&F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steelbutt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.[Note : Stainless steel butt hinges and necessary SS Screws shall be paid separately.] 50 S&F 35mm thick factory made single extruded WPC shutter (wood polymer composite) solid wire gauzed i.e. panel will be of wire gauze in lieu ofpanel. The comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steelbutt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.[Note : Stainless steel butt hinges and necessary SS Screws shall be paid separately.] 51 S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. 52 S&F MS flat iron as in hold fast clamps small articles conforming to FE-290 Gde-E-165, complete all as specified and directed. 53 M&L Plain Cement Concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in bed blocks for hold fast including necesssary formwork, complete all as specified and directed. 54 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. 55 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. 56 Dismantling wooden boarding, any description, fixed in any position with nails, complete all as specified and directed. 57 S&F 18/19mm thick prelaminated PVC plain solid board for shelves/wordrobes etc and fixed with screws to PVC frame workincl in this item rate, complete all as specified and directed. 58 S&F 18/19mm thick prelaminated PVC soild board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for shutters, fixed with angle frame work incl stainless steel hinges andf magnet catcher, complete all as specified and directed. 59 S&F Continuous (piano) hinges,width of flaps 40mm stainless steel, bright finish or electrogalvanised, complete all as specified and directed. 60 S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 122 x 54 mm & sash 47 x 64 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.[Note : (i) Glass or wiremesh shall be paid separately.(ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.] 61 M&L sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square n. exc 0.50 sqm in each pan, complete all as specified and directed. 62 M&L 4mm thick figured glass, pin head type and glazing with oil putty or with brass screws in square n.exc 0.50 sqm in each pan for bathrooms/toilets ventilators, complete all as specified and directed. 63 S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 , the grill shall be inserted in the wall surface including necessary drilling and grouting with cement etc, complete all as specified and directed. 64 S&F 100mm long butt hinges(ISI marked), extruded alluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed. 65 S&F 75mm long butt hinges (ISI marked), extruded alluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified and directed. 66 S&F aluminium anodised (ISI marked) 150 mm barrel tower bolts of extruded section, complete all as specified and directed. 67 S&F aluminium anodised (ISI marked) 100mm barrel tower bolts of extruded section, complete all as specified and directed. 68 S&F 150 mm long aluminium alloy handles (ISI marked),fabricated type, anodised, complete all as specified and directed. 69 S&F 100 mm long aluminium alloy handles (ISI marked), fabricated type, anodised, complete all as specified and directed. 70 S&F 300 mm long aluminium alloy (ISI marked), anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. 71 S&F 75 mm long hasp and staple (ISI marked), aluminium anodized with bolt to hinge plate and fixed with screws, complete all as specified and directed. 72 S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. 73 S&F 300 mm mild steel ordinary rat tail rod pattern spring including roller and sollar plates, complete all as specified and directed. 74 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required includingAluminium snap beading for glazing/ paneling,all complete as per architectural drawings and complete all as specified and directed. 75 S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and complete all as specified and directed. 76 S&F in repairs harrison curtain rails, mild steel,chromium plated with conical end balls suitable for fixing as end of curtain/dropery rods, complete all as specified and directed. 77 Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore, complete all as specified and directed. 78 Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore, complete all as specified and directed. 79 Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth, complete all as specified and directed. 80 S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed. 81 S&F 25 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed. 82 Dismantling of cast iron 100 mm dia pipes jointed in cement mortar, complete all as specified and directed. 83 S&F PVC SWR pipes 150 mm bore single socketed in any length with rubber ring joint fixed to wallwith steel clamps for rain water pipes, complete all as specified and directed. 84 S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wallwith steel clamps, complete all as specified and directed. 85 S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint , laid in trenches or in floors including dismantling of old unserviceable CI pipe, complete all as specified and directed. 86 S&F PVC SWR bends of 150 mm bore, complete all as specified and directed. 87 S&F PVC SWR bends of 110 mm bore, complete all as specified and directed. 88 S&F PVC SWR bends of 75 mm bore, complete all as specified and directed. 89 S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia, complete all as specified and directed. 90 S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia, complete all as specified and directed. 91 S&F PVC (SWR) vent cowl 110 mm bore, complete all as specified and directed. 92 M&L PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement, complete all as specified and directed. 93 S&F in repairs for Gun metal gate valve, 20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. 94 M&L old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in Cement Mortar 1:6 including dismantling of old unserviceable half brick work, complete all as specified and directed. 95 M&L brick work with half bricks thick fly ash bricks straight or curved on plan exc 6 m mean radius build in Cement Mortar 1:4 including dismantling of old unserviceable half brick work, complete all as specified and directed. 96 M&L prepration of newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of alkali resistanse primer over a coat of 1mm thick wall care putty, complete all as specified and directed. 97 M&L complete removal of old treatment on old plastered surfaces of wall and applying two coat of oil bound distemper over one coat of alkali resistanse primer over a coat of 1mm thick wall care putty, complete all as specified and directed. 98 M&L prepartion of newly plastered ceiling surfaces and applying three coat of white wash, complete all as specified and directed. 99 M&L complete removal of old treatment from old plastered ceiling surfaces and applyingthree coat of white wash, complete all as specified and directed. 100 M&L prepration of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.[Note : Min 5 (five) years guarantee certificate from manufacturer shall be submitted before issue of completion certificate.] 101 M&L complete removal of old treatment from old plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.[Note : Min 5 (five) years guarantee certificate from manufacturer shall be submitted before issue of completion certificate.] 102 M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description not otherwise described over 10cm width or girth, complete all as specified and directed. 103 M&L writing letters or figures (block, Roman, Italic or indian) n exc 30 cm, complete all as specified and directed. 104 S&F PVC waste pipe 32mm dia for wash basin 3.00 mtr complete all as specified and directed. 105 S&F PVC waste pipe 32mm dia for wash basin 3.00 mtr, complete all as specified and directed. 106 Roof treatment to be concluded in stages as mentioned below. complete all as specified and directed: -STAGE I:M&L 25 mm thick average Plain Cement Concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete on roof over two coat of high performance SBR based multipurpose polymer for water proofing, repair & bonding at the ratio of 1:3:8 (Latex :Water:Cement) in a criss cross way, including demolition of old unserviceable concrete treatment, rendering, old APP (in roof) & removing the same & cleaning thoroughly the base surface, complete all as specified and directed.[Note : (i) Second coat of latex is laid down minimum interval of 6-8 hours of first coat of latex and after second coat of latex immediate applied plaster work(ii) Make - Sika latex- power or similar make as mentioned in list of make in PS]STAGE II:M&L Plain Cement Concrete(1:2:4) type B-0 (using 20mm graded aggregate) as in roof kerbs or mud stop rounded including demolition of old unserviceable one. 107 Item No. 1.105 Contd….STAGE III:M&L in repairs rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:3 finished even and fair includingusing water proofing compound admixture as per manufacturers instructions, [Note : WPC will measured and paid separately under relevant item of schedule.]STAGE IVS&F & Providing water proofing treatment with a layer of APP based polymeric membrane 3mm thick minimum weighing 3.60 to 4.00 kg/sqm reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) shall be applied over one coat of cold bituminous primer @ 0.40 ltr/sqm (membrane shall be laid using butane torch sealing all joints etc and also include two coat of aluminium paint over APP based polymeric membrane complete all as specified and directed.[Note: The over lap shall be of minimum 75mm in longitudinal direction and 100mm on transverse direction] 108 Dismantling wrought iron or mild steel work of any description not otherwiseprovided for, complete all as specified and directed. 109 S&F Joist channel angle of tee section fixed independently without connecting plate as Fe 410 W (Gde-E-250 quality A), complete all as specified and directed. 110 M&L Plain Cement Concrete 1:3:6, type C2(using 40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. 111 M&L concrete bed to 150mm dia drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in Plain Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) including demolition & breaking up 150mm dia old unserviceable drain pipes, complete all as specified and directed. 112 Supplying and laying UPVC Eco drain Hi-tech pipe drainage sewer system pipe bearing 160mm dia minimum 4mm thick including jointing with coupler, bend tee as per site requirement complete laid in trenches or floors, complete all as specified and directed. 113 M&L precast cement concrete cover Type B-1,1:1.5:3(using 20mm graded crushed stone aggregates) set in cm 1:4 as in mahhole cover etc., complete all as specified and directed. 114 SCH A PART-II : INTERNAL ELECTRIFICATION 115 Taking down carefully aluminium conductor point wiring (light,fan,socket or power) completeincluding fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing(except those to be reused shall be kept in safe custodyat the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing, complete all as specified and directed. 116 M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one wayswitch using1.5 sqmm nominal cross sectional areamultistrandedcopper conductor ,PVC insulated unsheathedFRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked)fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSHPVC insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc., complete all as specified and directed. 117 All as per item No. 2.02 above but 5 Amp socket on same boardwith other switches, complete all as specified and directed. 118 All as per item No 2.02 above but 5 Amp socket on Independent boardwith other switches, complete all as specified and directed. 119 All as per item No. 2.02 above but 5 Amp Calling bell point with other switches, complete all as specified and directed. 120 All as per item No. 2.02 above but 5 Amp Two way point with other switches, complete all as specified and directed. 121 M&L wiring for socket outlet 3 pin, 15 ampson independent Boardscontrolled by one, one wayswitch using4.0 sqmm nominal cross sectional area multistrandedcopper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, includingpressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked)fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor, PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly andbrass screws, washers etc., complete all as specified and directed. 122 S&F in repairs switch piano flush type, single pole, 5/6 Amps, one way, complete all as specified and directed. 123 S&F in repairs Bell switch piano flush type, single pole, 5/6 Amps, one way, complete all as specified and directed. 124 S&F in repairs switch piano flush type, single pole, 6/16 Amps, Two way, complete all as specified and directed. 125 S&F in repairs socket outlet 2 in 1 multipurpose5 pin, (6 Amps) flush typecontrolled by one switch duly marked, complete all as specified and directed. 126 S&F in repairs switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch, complete all as specified and directed. 127 S&F in repairs switch socket combination 3 pin, (16 Amps) flush typecontrolled by one switch, complete all as specified and directed. 128 S&F in repairs Bell multi music type, AC 230 Volts, single pole 230 volts, complete all as specified and directed. 129 S&F in repairs ceiling rose surface bakelite 45 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps, complete all as specified and directed. 130 S&F in repairs stepped type electronic (min 5 steps) fan regulator flush type 240 Volts ISI marked, complete all as specified and directed. 131 S&F in repairs lamp holder, polycarbonatebody with back plate straight or angular suitable for batten fittings, complete all as specified and directed. 132 S&F in repairs submain two single core, 6 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including nd including suitable sizePVC conduit (ISI marked),concealed, including 6 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire, complete all as specified and directed.[Note : (i) Colour code for cable must be followed as per IS standards(ii) 2 run of 6.00sqm main wire one run of 6.00 Sqm earth wire & necessary PVC conduit withfittings, shall be considered as one run.] 133 S&F in repairs wall security light fittings 35 watts 230V, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection completewith all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size, complete all as specified and directed. 134 S&F in repairs 10 W LED light fitting mirror type 2, 220volt AC lighting fixture with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. 135 S&F in repairs LED light fitting 1x 20 W LED surface mounting general purpose ultra slim economical LED Battens in extruded PC housing and square to suit variety of application areas connedting up with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed. 136 S&F in repairs Decorative wall light, fixture made up of polycarbonate suitable for 9W LED lamp B22 base, complete all as specified and directed. 137 S&F in repairs 12 watt surface mounted square LED Down light Colour (CW) aesthetically designed made by aluminium P-die-cast enclousers, with separate replaceable constant current driver 12 watts for grid ceilling including electrical connection, complete all as specified and directed. 138 S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote after taking down/ dismantling of existing ceiling fan from ceiling & depositing in the MES store room , complete all as specified and directed.[Note : Old existing fan to be deposited in MES store & necessary RV & ledger No. to be obtained] 139 S&F exhaust ventilation fan with louvers of sweep 250mm, 230 volts 1200 Rpm, with blade and frame and louvers sturdy engineering plastic complete with suitable size of hole, ISI marked after taking down/ dismantling of existing ceiling fan from ceiling & depositing in the store room, complete all as specified and directed.[Note : Old existing fan to be deposited in MES store & necessary RV & ledger No. to be obtained] 140 S&F exhaust ventilation fan with louvers of sweep 225mm, 230 volts 1200 Rpm, with blade and frame and louvers metal body complete with suitable size of hole, ISI marked, after taking down/ dismantling of existing ceiling fan from ceiling & depositing in the store room, complete all as specified and directed.[Note : Old existing fan to be deposited in MES store & necessary RV & ledger No. to be obtained] 141 S&F electric water heater (Geyser) storage type steel body with copper inner tank and heating element upto 2KW capacity 25 Litres, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc after taking down/ dismantling of existing geyser & depositing in the store room, complete all as specified and directed.[Note : Old existing fan to be deposited in MES store & necessary RV & ledger No. to be obtained] 142 S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact, complete all as specified and directed.[Note : Cable fixed with suitable size Lux and blanker fill with blanker.] 143 S&F in repairs epoxy powder coated sheet metal enclosure for DBs, Double door (when MCBs to be used), tripple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact, complete all as specified and directed.[Note : Cable fixed with suitable size Lux and blanker fill with blanker.] 144 S&F in repairs 240V, 10 KA C curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed. 145 S&F in repairs MCB SPN 32 Amps, C series 10kA, 240 Volts and to be housed in DBs complete including necessry connection, complete all as specified and directed.[Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.] 146 S&F in repairs MCB TPN 25-63 Amps, C series 10kA, 415 Volts and to be housed in DBs complete including necessry connection, complete all as specified and directed.[Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.] 147 S&F in repairs 63 Amp MCCB 4 pole, 3 phase, 415 volt of capacityAmp, 16 KA complete with proper copper thimbles, copper reducer etc., with fixed thermal & magnetic setting complete all as specified and directed.[Note : cable fixed with suitable size Lux and blanker fill with blanker.] 148 M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased inand including 40 mm dia GI lightgrade pipe from upper end of earth plate upto equipments,20 dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe andPlain Cement Concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and Reinforced Cement Concrete pit cover 50mm thick precast Reinforced Cement Concrete 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in Electrical Plate No-3 of SSR Part-I complete all as specified and directed and testing on completion.[Note : Ifthe desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.] 149 S&F in repairs of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythene ball screwed for irom pipe 25 mm bore dia with fly nut, complete all as specified and directed. 150 S&F in repairs 25mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings including taking down old unseviceable pipe, complete all as specified and directed. 151 S&F in repairs 40mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings including taking down old unseviceable pipe, complete all as specified and directed. 152 S&F in repairs 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes, complete all as specified and directed. 153 S&F 40 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes, complete all as specified and directed. 154 S&F in repairs capacity 500 Ltrs rotational moulded polyethylene water storage tanks 3 layered, white, anti bacterial, UV resistant, Threaded lid, anti microbial, 100% virgin food grade plastic, prevent algae growth, anti viral/ bacterial/ fungal/ algae properties, (Cylindrical, vertical with closed top) complete including provision of all inlet outlet overflow and drain pipe fittingincluding taking down unserviceable tank, complete all as specified and directed. 155 M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmmx4core laying properly in trench including dismantling old unserviceable cable, complete all as specified and directed. 156 Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil, complete all as specified and directed. 157 Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil, complete all as specified and directed. 158 Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. 159 Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying, complete all as specified and directed.[Note : Punned thickness shall be measured.] 160 M&L sub class B fly ash bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable, complete all as specified and directed. 161 S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc., complete all as specified and directed.
Contract Date: Feb 18, 2026 Contract Value : 79.17 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
West Bengal View Result →
37.
Defence #9588954 AOC
Tender For Special Repair To Building No P-162 (Sncos Billet) At Darjipura At Af Station Vadodara.; 1 Taking down chowkats or frame exc 1.5 Sqm and n exc 4.0 Sqm each (without taking off shutter from the fram) all as speified and as directed. 2 Taking down chowkats or frame nexc 1.5 Sqm each (without taking off shutter from the fram) all as speified and as directed. 3 Taking down shutter only of any description exc 1.0 Sqm n exc 2.0 Sqm and removing all as speified and as directed. 4 M&L 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc(without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed 5 M&L Factory made flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in shutter all as specified and as directed. 6 Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and choppedmat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. 7 Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate forpanels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. 8 S&F 75mm long SS Heavy weightbutt hinges and fixed to frame with scrwewd or welding comlete. 9 S&F 100mm long SS Heavy weightbutt hinges and fixed to frame with scrwewd or welding comlete. 10 S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 200mm. 11 S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed. 12 S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed 13 S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm. 14 S&F for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. 15 S&F for 100mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. 16 S&F in repair door stopper of aluminum alloy body and tongue double legged anodized with hard draw steel spring over all length of cover plate 150mm fixed in floor all as specified (ISI Marked). 17 S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples. 18 S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. 19 S&F 4mm thick figured glass, pin headed type and glazing with oil puttyin square n exc 0.5 sq. m in each pane incl taking down existing broken glass from metal frames complete all as specified 20 S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified 21 S&F Powder coated aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified 22 M&L Pressed steel frames(125 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified, 23 M&L Pressed steel frames(105 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed 24 M&L PCC 1:2:4 Type B-0 using 12.5mm graded aggregate for filling of pressed steel door frame complete all as specified and directed by Engineer-in-Charge. 25 M&L Preparation of new or old wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer. 26 M&L for special treatment to sunken portion (including necessary dismantling of tiles and PCC of any description and thickness alongwith) with 10mm thick plaster in CM 1:4 mixed with and including WPC liquid complast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering again 10 thick plastered in CM 1:4 mixed with and including complast 421 in sunken portion of WC and CI pipe joint shall be fitted inc filling of lean concrete 1:5:10 type E2 complete all as specified and directed 27 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. 28 M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular)area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.incl screed bed 15 mm thick in CM 1:4 as bedding layer for floor finishes. 29 M&L Glazed ceramic tile coloured tile in verticle surface such as dado /skirting etc 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white and coloured cement to match over and including 10 mm thick rendering in CM 1:4 as backing coat complete all as specified. 30 Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. 31 M&L for 75 mm thick Cement concrete Type D21:4:8 (40 mm graded gradedaggregate) as in sub bases,floor finishes and pavings. 32 Demolition of stone slabs and tiles of any description or any thickness, laid bedded and pointed in any mortar. 33 M&LMachine cut Pre polishedkota stone slab flooring 20-25 mm thick over and incl 15mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece as in window cill, stairscase and Kitchen platform etc. 34 S&F in repair vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. 35 S&F EWC vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flush pipe anti syphonage pipe etc and with plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed. 36 S&F PVC low level flushing cistern 10 Ltrs capacity with all internal accessories and fixed to wall including provision of pvsc flush pipe 32mm dia 90 cm long fixed properly to inlet of EWC/IWC etc complete all as specified and as directed. 37 S & F PVC (SWR) P trap of 110mm. 38 S & F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75 mm dia. 39 S & F Bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for union pipe of BF tails complete and fixed to 15mm dia pipe all as directed. 40 S & F in repair vitrous China wash basin (WHB), white, bowl type, size 550mm x 400mm (approx) excluding supply of E/F taps, but including waste pipe, 1m length anti-siphon brass chromium plated for glazed basins etc. with long screwed shackles and fit nuts, flange end embedded in red lead or similar compound fixed, chain and plug and porcelain stopper, steel brackets including casting for wall pinning in ends of brackets or erecting steel wall making connections to waste and supply pipes and complete all as specified and directed. 41 S & F Vitreous China urinal, half stall type white including Urinal spreader of CP, PVC waste fittings 32mm size PVC connection of 15mm size with PTMT nuts of length 450mm long including bracket complete all as specified and directed by Engineer-in-Charge. 42 S & F Vitreous China urinal partition white of size 310x700mm complete all as specified. 43 S & F in repairs 600x450 mm bevelled edge mirror of selected quality glass mounted on PVC sheet / Commercial ply / AC sheet with PVC moulded all around beading and fixed to wooden plugs with chromium plated brass screws and cup washers. 44 S & F tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges complete all as specified and as directed. 45 & F CPVC Pipe, 32mm bore of pipe, of pressure rating 6 Kgf/sqcm with polyethylene thread union and check nuts, fixed to walls or in waste pipe for wash basin and urinal complete all as specified and as directed. 46 S & F Soap dish, SS approximately size 100x100x 50mm complete all as specified and as directed. 47 S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube SS and ABS wall hook including making connections and fixed in position complete in all respect as specified 48 S & F pillar taps swan neck type cast copper alloy with capstan heads, chromium plated screwed down high pressure with BF or without lettered Hot or cold with long screwed shanks and flynuts, screwed for union pipe and fixed to 15mm dia pipe. 49 S & F PVC connections 15mm size with PTMT nuts of length 450mm. 50 S & F in repair Brass chromium plated shower rose 125mm size swivel type. 51 S & F in repair 15mm dia angle valves cast corper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. 52 S & F in repairs Concealed type Stop valves, fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, screwed bothends for iron pipe or for unions and fixed to 15mm bore pipe complete all as directed. 53 Taking up or down steel tubing and connections for 15mm bore, including cleaning for refixing or removal to store 54 Taking up or down steel tubing and connections for 20 mm bore, including cleaning for refixing or removal to store 55 S&F 15mm bore GI tubes medium grade including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls,ceiling or in floors etc complete to walls and ceiling or laid in floors, etc complete and making good the area vto match with existing surface complete all as specified and directed 56 S&F 20mm bore GI tubes medium grade including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls,ceiling or in floors etc complete to walls and ceiling or laid in floors, etc complete and making good the area vto match with existing surface complete all as specified and directed 57 Taking down rainwater pipes (any size or pattern), including all fittings,heads,shoes,bends,swan-necks, etc. including cleaing or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) 58 Demolition and breaking up drain pipes (CIdrain pipes /PVC/ AC or Reinforced concrete) set in cement mortar (100mm dia), if required complete all as specified and directed. 59 S&F 110 mm bore PVC (SWR) pipes Double/single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor incl neccesary fixing arrangement all as specified and directed. 60 S&F 75 mm bore PVC (SWR) Rain water pipes Double/Single socketed in any length with rubber ring joints fixed to wall or in trenches or in floor including neccesary fixing arrangements all as spd and directed all as specified and directed 61 S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequalall as specified and directed. 62 S&F 110 mm bore PVC (SWR) junction single,(single T) equal or unequal provided with access door all as specified and directed 63 S&F 110 mm bore PVC (SWR) bends any radius with access door all as specified and directed 64 S&F 110 mm bore PVC (SWR) reducers all as specified and directed 65 S&F 110 mm bore PVC (SWR) couplers all as specified and directed 66 S&F 75 mm bore PVC (SWR) junction single,(single T) equal or unequal provided with access door all as specified and directed 67 S&F 75 mm bore PVC (SWR) bends any radius with access door all as specified and directed 68 Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed 69 S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified 70 S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming Fe 410-W (Gde-E-250) quality-Acomplete all as spd and directed. 71 S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut. exc 30 cm long dia of neck exc 12mm n exc 20 mm complete all as specified and as directed by Engr-in-Charge. 72 M&L Preperation of new steel surfaces and applying with 2 coat synthetic enamel paint of any description over 10 cm in width or girth ,not otherwise described over a red oxide primer complete all as specified 73 Demolition of reinforced concrete any description and in ant position not otherwise specifically provided for all as specified and directed. 74 Separating, scraping and cleaning ofreinforcement (Demolition of concrete measured separately) 75 M&L cement concrete type B0 1:2:4 (12.5 mm graded aggregate)as in copings and other similar bands, plinth courses, string courses, lacing courses,parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified 76 Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified 77 M&L Brick work with sub class B bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified 78 M&L for grouting 40mm thick under stanchion bases or grillage,etc. including any temporary shuttering to edges with cement mortar 1:2 complete all as specified and as directed. 79 Repaires to plaster of existing railings of thickness 12 mm to 20mm in patches of area 2.5 Sqm and including cutting the patch in proper shape, racking out joints and preparing and plastering the surface of wall complete including disposal or rubbish to the dumping ground within 50m lead with cement mortar 1:4 complete all as specified and directed 80 Taking dawn cementplaster any description on brick or stone wall/ celling including raking out joint, haking for key scrubing with water etc. 81 M & L 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finishedeven and smooth with thin layer of sagol. 82 M & L 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 using water proofing compound on faces of brick masonry wall, finished even and fair etc complete. 83 Supply only integral water proofing compound (ISI Marked) 84 M&L Rendering 5mm thick on concrete surface of ceiling CM 1:3 finishing the surface fair and even complete all as specified and directed. 85 M&L Preparation of new plastered surface of wall and applyingtwo coats of exterior acrylic emulsion paint over a coat primer complete all as specified and directed. 86 M&L Preparation of new surfaces of wallrubbing down andapplying two coats of oil bound distemper over application of chalk whiteningcompleteall as specified as directed 87 M&L Preaparation of new plastered wall surface and applying three coats of white wash on ceiling surface complete all as specified and directed 88 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. 89 Taking out existing serviceable LED tubelight fitting 20W / 10 W from wall/ ceiling &Fixing onlyLED tubelight fitting 20W / 10 W and connecting up including provision of cable from ceiling rose/connector to fan complete. 90 Taking out existing serviceable Exast fan 300 mm sweep from wall & Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan Complete. 91 Taking down existing serviceable Geyser from site and depositedat store and refixing the same serviceable geyser after complete servicing at sitecomplete all as specified & directed. 92 Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of metal flush box, white cover plate with frame, blanking plate etcand making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/fan point controlled by one, one way switch 06 Amps. 93 All as per srl item No here-in-before but one fan point controlled by one, one way switch 06 Amps. 94 All as per srl item No here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch. 95 All as per Serial Item Noabove but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. 96 Supply and fixing Switch Piano, Flush Type,05 Amps, single pole, one way, 250 volts, complete all as specified & directed. 97 Supply and fixingswitch Piano flush type 15 Amps, single pole, one way, 250 volts,complete all as specified & directed. 98 Supply and fixing socket outlet. 2 in 1, 3 pin 5 Amp flush type complete all as specified & directed. 99 Supply and fixing socket outlet 02 in 01, 03 pin, 05 Amps and 15 Amps, flush type complete all as specified & directed. 100 Supply and fixingceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm sizecomplete all as specified & directed. 101 Supply and Fixing in repair 10W LED T5 TL fitting (300mm) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed. 102 Supply and fixing on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed. 103 Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed. 104 Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, C curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. 105 Supply and fixing in repair sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed. 106 Supply and fixing in repair MCB, SP, AC, 240 volts of 06 to 32 Amps capacity C curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. 107 Supply and fixing in repair MCB, DP, AC, 240 volts of 32 Amps capacity C curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. 108 Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long) complete with CI base plate and finial taper including foundation and coping 109 Supply and fixing LED flood light 250 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant and fixing on 50x50 mm angle iron support with brazingcomplete all as specified and as directed. 110 Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying/taking out of cables,CI/GI pipe lines and getting out in sooft/loose soil all as specified and directed. 111 Returning, filling in trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cms insoil all as specified and directed by Engineer-in-Charge. 112 Removal of excavated material and deposited where directed at a distance not more than 50M from starting point and not more than 1.5Mabove ground level. 113 Taking out unserviceable/GI water main from trenches including fittings / fixtures like bend, Tee, Union, Elbow etc with flanged endsall as specified and as directed by Engineer-in-Charge..Note: Excavation and earthwork will be measured and paid separately under appropriate items. 114 50 mm bore GI pipe 115 25mm bore GI pipe 116 Supply and fixing of 50 mm bore steel water Tubes, medium grade,galvanised,with all fitting complete to laid in trenchesincluding taking down existing unserviceable pipes with smooth finished and make embosed on pipe complete all as specified and directed . 117 Supply and fixing of 50 mm bore steel water Tubes, medium gradegalvanised,with all fitting and fixed complete to walls and ceilings or laid in floorsincluding taking down existing unserviceable pipes with smooth finished and make embosed on pipe complete all as specified and directed . 118 Supply and fixing of 25 mm bore steel water Tubes, medium gradegalvanised,with all fitting and fixed complete to walls and ceilings or laid in floorsincluding taking down existing unserviceable pipes with smooth finished and make embosed on pipe complete all as specified and directed . 119 Dismantling / Taking down unserviceable Gun metal globe/gate valve and supply and fix new Gun metal globe / gate valve, screwed down high pressure with iron wheel head, screwedboth ends for GI pipe including all fittings / fixtures like nipple, union etc complete for following sizesall as specified and ass directed by theEngineer-in-Charge. 120 50 mm bore size 121 25 mm bore size
Contract Date: Feb 17, 2026 Contract Value : 40.80 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
38.
Defence #9578055 AOC
Tender For Special Repair To Building No P/139 And P/140 At Batra Enclave Under Ge Panagarh; 1 SCH A PART-I : B/R PORTION 2 M&L Rendering 10 mm thick cement plaster in Cement Mortar 1:6 onfair faces of brick/concrete work surfaces finished even and smooth (without using extra lime or cement) including taking down old/ unserviceable cement plaster, complete all as specified and directed. 3 M&LRendering 15 mm thick cement plaster in Cement Mortar 1:4 onother than fair faces of brick/concrete surfaces finished and smooth without useing extra cement and using water proofing compound as per manufacturers instruction by weight of cement content including taking down old/ unserviceable cement plaster, complete all as specified and directed.[Note : WPC will measuered and paid separatly under relevant item of schedule.] 4 M&L Rendering 5 mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3finished even and smooth (without using extra lime or cement) including taking down old/ unserviceable cement plaster, complete all as specified and directed. 5 Supply only liquid water proofing compound, complete all as specified and directed. 6 M&L TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to, complete all as specified and directed. 7 M&L TMT mild steel bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to, complete all as specified and directed. 8 M&L Reinforced Cement Concrete M-25 grade (nominal mix) using 20 mm graded stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc., including demolition of old/unserviceable reinforced cement concrete, complete all as specified and directed. 9 M&L Reinforced Cement Concrete M-25 grade (using 20mm graded stone aggregate) for chajjas and the like including demolition of old/unserviceable reinforced cement concrete, complete all as specified and directed. 10 Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and semilar works not exceeding 200mm thick (horizontal or sloping), surface of concrete flat for rough finished surface of concrete, complete all as specified and directed. 11 Use and waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges etc surface of concrete flat for rough finished surface of concrete, complete all as specified and directed. 12 M&L Welding MS wire mess weighing not less than 1 kg/sqm and primed withcorrosion resistan, two component, zinc rich epoxy primer, fixing to the prepared concrete surface through proper fixing arrangements and applying 40 mm thick avg cement mortar with guniting and shot gun at a pressure not less than 4 kg/sqm in ratio 1:2 mixed with liquid water proofing compound chemical not less than 5% by weight of cement including tapping of new reinforcement to the rusted portion all as manufactures instructions and carried out the work as per procedure, complete all as specified and directed. 13 M&L 75 mm thick Plain Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) fininshed as in plinth protection surfaces even and smooth without using extra cement including demolition of old unserviceable plain cement concrete, complete all as specified and directed. 14 M&L providing plain cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in coping to chajja tops and all other similar works, including demolition of old unserviceble plain cement concrete, complete all as specified and directed. 15 M&L taking down old unserviceable sunken floor concrete & WCs and applying (a) providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry with acrylic based modified cementitaous composite compound coating of make as approved in technical instruction 5/2003 (b) First layer of slurry of cement @ 0.5 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) second slurry of cement @ 0.500 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (d) 200 micron thick polythene film pasted with the help of bituminous adhesive shall be provided over treatment. (e) Plain Cement 1:5:10 using brick aggregate for sunken filling shall be provided, complete all as specified and directed.[Note : Only plain area considered for measurement] 16 S&F as in repairs closet vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed. 17 S&F as in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl pvc seat cover with hinging devices, complete all as specified and directed. 18 S&F in repairs vitreous China wash basin white, flat back,size 550X450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed. 19 S&F in repairs 10 litre capacity PVC low level flushing cistern, whitewith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets), complete all as specified and directed. 20 S&F in repairs 15mm bore fancy type stop valve, chromium platedconcealed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. 21 S&F in repairs PVC connection 15mm size PTMT nuts of length 600mm complete all as specified. 22 S&F in repairs 15mm bore pillar taps cast copper alloy,with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred HOT or COLD with long screwed sunk and fly nuts, complete all as specified and directed. 23 S&F as in repairs bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 24 S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in positions, complete all as specified and directed. 25 S&F in repairs 15 mm bore brass CP Mixer for mixing hot and cold water screwed down for iron pipe and fixed, complete all as specified and directed. 26 S&F in repairs toilet paper holder with flat recessed type stainless steel arm fixed to walls with chromium plated berass screws, complete all as specified and directed. 27 S&F in repairs waste coupling of PTMT (half or full threaded) 32mm bore dia (min weight 45gm) of discharge pipe, complete all as specified and directed. 28 S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. 29 S&F as in repairs grating square 150mm size of PTMT (minimum 100 gms), complete all as specified and directed. 30 S&F as in repairs grating square with waste hole 150mm size of PTMT (minimum 100 gms), complete all as specified and directed. 31 S&F in repairs 600 X 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board for commercial plywood fixed to wooden plugs with chromium plated brass screws and cups, complete all as specified and directed. 32 S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. 33 S&F as in repairs tubular towel rail brass chromium plated 20 mm dia `D type 60 cm long between flanges, complete all as specified and directed. 34 S&F as in repairs chromium plated shower roses 125 mm longwith or without swivel joints, any size, including fixing fixing to steel pipe or union, complete all as specified and directed. 35 S&F in repairs stainless steel kitchen plate rack made out of 0.65 mm thick of approved make with plugs, washers, over all size 786mmx610mmx254mm, complete all as specified and directed. 36 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:6 including dismantling old unserviceable tiles, complete all as specified and directed. 37 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqmon vertical surface such as skirtings etc. set and jointed in cement slurryover 10 mm thick rendering in Cement Mortar 1:3 including dismantling old unserviceable tiles, complete all as specified and directed. 38 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:6 including dismantling old unserviceable tiles, complete all as specified and directed. 39 M&L Glazed ceramic tiles Coloured 450 x 350mm 7 to 8 mm thick in wall/dado etc, set & jointedin neat cement slurry & pointed in white or coloured cement to match renderingover 10 mm thick in CM 1:3 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces including dismantling old unserviceable tiles, complete all as specified and directed. 40 M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite of any type of work including dismantling old unserviceable stone slabs, complete all as specified and directed. 41 M&L 18 to 20 mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills,bathroom corners cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade including dismantling old unserviceable stone slabs, complete all as specified and directed. 42 Rounding to edges of stone slabs exposededge, such as in steps, cooking platform and other similar situation, complete all as specified and directed. 43 M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete lad over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in Cement Mortar 1:6 for laying floor finish including dismantling old unserviceable stone slabs, complete all as specified and directed. 44 M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 36 over 10mm thick in cement mortar Cement Mortar 1:3 including dismantling old unserviceable stone slabs, complete all as specified and directed. 45 Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed. 46 Taking down of chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from frames), complete all as specified and directed. 47 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.[Note : (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus sideshall be acceptable but no extra payment on this account shall be made.] 48 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.[Note : (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus sideshall be acceptable but no extra payment on this account shall be made.] 49 S&F Factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steelbutt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. 50 S&F 30mm thick factory made single extruded WPC shutter (wood polymer composite) solid wire gauzed i.e. panel will be of wire gauze in lieu ofpanel. The comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steelbutt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.[Note : Stainless steel heavy duty butt hinges with necessary SS Screws shall be paid separately.] 51 S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. 52 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. 53 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. 54 S&F in repairs 18/19 mm thick prelaminated PVC plain solid ply for shelf andfixed with screws to PVC frame work etc., complete all as specified and directed. 55 S&F in repairs 18/19 mm thick prelaminated PVC solid board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for shutter, fixed with angle frame work including Stainless steel hinges and magnet catcher, complete all as specified and directed. 56 Supply Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings, complete all as specified and directed. 57 Supply Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, locking arrangement ,C.P. brass/ stainless steel screws all complete as per architectural drawings, complete all as specified and directed. 58 S&F Factory made UPVC white colour Three track three panels sliding window / ventilator with fly proof S.S wire mesh (Two nos. glazed and one no.wire mesh panels) upto 1.50m height made of (big series) frame 122 x 54 mm & sash 47 x 64 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of UPVC multichambered frame, with inbuilt roller track & sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of uPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.[Note : (i) Glass or wiremesh shall be paid separately.(ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.] 59 S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, the grill shall be inserted in the wall surface including necessary drilling and grouting with cement etc., complete all as specified and directed. 60 S&F 4.80 mm thick sheet glass, ordinary quality and glazing with rubber gasket & aluminium beading in square exc 0.5 Sqm in each pane, complete all as specified and directed. 61 S&F 5 mm thick figured glass, pin head type and glazing with rubber gasket in squares n exc 0.5 sqm in each pane, complete all as specified and directed. 62 S&F 100 mm long heavy duty butt hinges, extruded alluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed. 63 S&F 75 mm long butt hinges, extruded alluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed. 64 S&F aluminium anodised 150 mm barrel tower bolts of extruded section, complete all as specified and directed. 65 S&F aluminium anodised 100 mm barrel tower bolts of extruded section, complete all as specified and directed. 66 S&F 150 mm long aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. 67 S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. 68 S&F 75 mm long hasp and staple, aluminium anodized with bolt to hinge plate and fixed with screws, complete all as specified and directed. 69 S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. 70 S&F in repairs MS drapery rods of 25 mm dia of PVC coated as in curtain rods, complete all as specified and directed. 71 S&F MS PVC sheeted / power coated bracket size 150 mm made to shape suitable for holding curtain/drapery of rod of 25mm dia fixed with PVC rawl plugs and MS steel screws, complete all as specified and directed. 72 Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n.exc. 10cm girth, complete all as specified and directed. 73 S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11with all fittings (plane and brass threaded) and fixed complete to walls and ceiling or laid in floors including taking down of old unserviceable pipes of 15mm bore, complete all as specified and directed. 74 S&F 25 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11with all fittings (plane and brass threaded) and fixed complete to walls and ceiling or laid in floors including taking down of old unserviceable pipes of 20mm bore, complete all as specified and directed. 75 S&F PVC SWR pipes 160 mm of nominal outer dia of pipe single socketed in any length with rubber ring joint fixed to wall with steel clamps for rain water pipes, complete all as specified and directed. 76 S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall with steel clamps including dismantling of old unserviceable cast iron pipe, complete all as specified and directed. 77 S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint, laid in trenches or in floors including dismantling of old unserviceable cast iron pipe, complete all as specified and directed. 78 S&F PVC SWR bends of 160 mm size, complete all as specified and directed. 79 S&F PVC SWR bends of 110 mm bore, complete all as specified and directed. 80 S&F PVC SWR bends of 75 mm bore, complete all as specified and directed. 81 S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia, complete all as specified and directed. 82 S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia, complete all as specified and directed. 83 S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia, complete all as specified and directed. 84 S&F PVC (SWR) vent cowl 110 mm bore, complete all as specified and directed. 85 S&F in repairs for Gun metal gate valve, 20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. 86 Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr, complete all as specified and directed. 87 M&L old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in Cement Mortar 1:6 including demolition of old unserviceable brickwork, complete all as specified and directed. 88 M&L brick work with half bricks thick fly ash bricks straight or curved on plan exc 6 m mean radius build in Cement Mortar 1:6 including demolition of old unserviceable brickwork, complete all as specified and directed. 89 M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of wood and wood based primer of any description not otherwise described over 10cm width or girth, complete all as specified and directed. 90 M&L preparation of newly plastered surfaces of wall to prepare the surface even and smooth by applying two coat of oil bound distemper over one coat of alkali resistantprimerincl 1mm wall putty for complete smooth surfaces, complete all as specified and directed. 91 M&L preparation of newly plastered ceiling surfaces and preparing the surface even and smooth by applying two coat of oil bound distemper over one coat of alkali resistantprimer incl 1mm wall putty for complete smooth surfaces, complete all as specified and directed. 92 M&L complete removal of old treatment from ceiling surfaces and applying two coat of oil bound distemper for smooth surfaces, complete all as specified and directed. 93 M&L preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified and directed. 94 M&L complete removal of existing treatment by means of mechanical scrubing and dust collector machine and by hand where mechanically cannot reach and washing down with water and applying exterior wall putty on the surface to bring the surface smooth and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as specified and directed. 95 M&L complete removal of old treatment of old plastered surfaces of walls andapplying wall putty of 1 mm thick over plastered surface to prepare the surface even and smooth and applying two coat of oil bound distemper over one coat of alkali resistantprimer, complete all as specified and directed. 96 M&L 40 mm thick Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof, finished fair including demolition of old unserviceable concrete/ treatment, complete all as specified and directed. 97 M&L Rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:3 finished even and fair, complete all as specified and directed. 98 M&L Preparation new surfaces on roof and applying two coats of polyurethene (PU) water proofing liquid compound over & including one coat of self priming @ one litre per 10 sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/seepage from roof /wall, complete all as specified and directed.[Note : (i) As per description of these item minimum two coats of polyurethene (PU) water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made. If as per manufacturer instructions more coats of polyurethene (PU) water proofing liquid compound& primer are required for roof treatment.(ii) Quoted rate shall be deemed to be included for work in building /structure of any height.] 99 Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. 100 S&F rolled mild steel in Roof trusses (framed) of steel work in tubular trusses including special shape washers etc., complete using ERW or induction or butt welded tubes conforming to IS:1161-1979 grade St-240, complete all as specified and directed. 101 M&L Plain Cement concrete 1:3:6, type C-1(using 20mm graded stone aggregate) in surface channels and drains and Manholes including demolition of old unserviceable one, complete all as specified and directed. 102 M&L Extra for forming 30 cm inner girth fair finished drains or channels i.e. exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc., complete all as specified and directed. 103 M&L in repairs 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed. 104 M&L 75 mm thick cement concrete type C2, for Plain Cement Concrete (1:3:6) using 40 mm graded aggregate used as in sub base, sub floor/pavings and finishing cement concrete surface without using extra cement including demolition the old unserviceable one, complete all as specified and directed. 105 S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old one, complete all as specified and directed. 106 SCH A PART-II : INTERNAL ELECTRIFICATION 107 Taking down carefully aluminium conductor point wiring (light,fan,socket or power) completeincluding fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing(except those to be reused shall be kept in safe custodyat the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing, complete all as specified and directed. 108 M&L Point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one wayswitch using1.5 sqmm nominal cross sectional areamultistrandedcopper conductor ,PVC insulated unsheathedFRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSHPVC insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc., complete all as specified and directed. 109 All as per item No. 2.02 above but5 Amp socket on same boardwith other switches, complete all as specified and directed. 110 All as per item No. 2.02 above but 5 Amp socket on Independent boardwith other switches, complete all as specified and directed. 111 All as per item No. 2.02 above but 5 Amp Calling bell point with other switches, complete all as specified and directed. 112 All as per item No.2.02 above but 5 Amp Two way point with other switches, complete all as specified and directed. 113 M&L Point Wiring for socket outlet 3 pin, 15 amps on independent Boardscontrolled by one, one wayswitch using4.0 sqmm nominal cross sectional areamultistrandedcopper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, includingpressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked)fitted with Chromium plated brass screws & washersand 4.0 sqmm nominal cross sectioanl area multistranded copper conductor, PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly andbrass screws, washers etc., complete all as specified and directed. 114 S&F switch piano flush type, single pole, 5/6 Amps, one way, complete all as specified and directed. 115 S&F Bell switch piano flush type, single pole, 5/6 Amps, one way, complete all as specified and directed. 116 S&F switch piano flush type, single pole, 6/16 Amps, Two way, complete all as specified and directed. 117 S&F socket outlet 2 in 1 multipurpose5 pin, (6 Amps) flush typecontrolled by one switch duly marked, complete all as specified and directed. 118 S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps flush type controlled by one switch, complete all as specified and directed. 119 S&F switch socket combination 3 pin, (16 Amps) flush type controlled by one switch, complete all as specified and directed. 120 S&F Bell multi music type, AC 230 Volts, single pole 230 volts, complete all as specified and directed. 121 S&F ceiling rose surface bakelite 45 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps, complete all as specified and directed. 122 S&F stepped type electronic fan regulator (min 5 no step) flush type 240 Volts ISI marked, complete all as specified and directed. 123 S&F lamp holder, polycarbonate body with back plate straight or angular suitable for batten fittings, complete all as specified and directed. 124 S&F in repairs submain two single core, 6 sqmm nominal cross sectional areamultistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire, complete all as specified and directed.[Note : 2 Nos. 6.00 Sqm main wire, one No. 6.00 Sqm earth wire & necessary PVC conduit & fittings shall be measured as one run] 125 S&F in repairs wall security light fittings 35 watts 230V, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size, complete all as specified and directed. 126 S&F in repairs 10 W LED light fitting mirror type 2, 220volt AC lighting fixture with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed. 127 S&F in repairs LED light fitting 1x 20 W LED batten AC decorative box type with driver, holder including LED tube light conneting up with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed. 128 S&F Decorative wall light, fixture made up of polycarbonate suitable for 9W LED lamp B22 base, complete all as specified and directed. 129 S&F in repairs 1x9 W LED Inverter bulb, 220volt AC lighting fixture with complete all accessories and connection with twin core twisted flexible copper conductor cable with suitable size and earthing complete,, complete all as specified and directed. 130 S&F in repairs 12 watt surface mounted square LED Down light Colour (CW) aesthetically designed made by aluminium P-die-cast enclousers, with separate replaceable constant current driver 12 watts for grid ceilling including electrical connection, complete all as specified and directed. 131 S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote including taking down old existing ceiling fan & deposited to store, complete all as specified and directed.[Note : Old unserviceable ceiling fan shall be deposited to MES store & necessary receipt voucher & ledger receipt No. be obtained] 132 S&F exhaust ventilation fan with louvers of sweep 225mm, 230 volts 1200 Rpm, with blade and frame and louvers sturdy engineering plastic complete with suitable size of hole, ISI marked including taking down old existing ceiling fan & deposited to store, complete all as specified and directed.[Note : Old unserviceable ventilation fan shall be deposited to MES store & necessary receipt voucher & ledger receipt No. be obtained] 133 S&F exhaust ventilation fan with louvers of sweep 250mm, 230 volts 1200 Rpm, with blade and frame and louvers sturdy engineering plastic complete with suitable size of hole, ISI marked including taking down old existing ventilation fan & deposited to store, complete all as specified and directed.[Note : Old unserviceable ventilation fan shall be deposited to MES store & necessary receipt voucher & ledger receipt No. be obtained] 134 S&F electric water heater (Geyser) storage type steel body with copper inner tank and heating element upto 2KW capacity 25 Litres, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc., including taking down old existing electric water heater (Geyser) & deposited to store complete all as specified and directed.[Note : Old unserviceable water heater shall be deposited to MES store & necessary receipt voucher & ledger receipt No. be obtained] 135 S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door(when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact, complete all as specified and directed.[Note : Cable fixed with suitable size Lux and blanker fill with blanker.] 136 S&F in repairs epoxy powder coated sheet metal enclosure for DBs, Double door (when MCBs to be used), tripple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact, complete all as specified and directed.[Note : Cable fixed with suitable size Lux and blanker fill with blanker.] 137 S&F in repairs 240V, 10 KA C curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed. 138 S&F in repairs MCB SPN 32 Amps, C series 10kA, 240 Volts and to be housed in DBs complete including necessary connection, complete all as specified and directed.[Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.] 139 S&F in repairs MCB TPN 25-63 Amps, C series 10kA, 415 Volts and to be housed in DBscomplete including necessry connection, complete all as specified and directed.[Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.] 140 S&F in repairs 63 Amp MCCB 4 pole, 3 phase, 415 volt of capacity Amp, 16 KA fixed magnetic & thermal setting complete with proper copper thimbles, copper reducer etc, complete all as specified and directed.[Note : Cable fixed with suitable size Lux and blanker fill with blanker.] 141 M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased inand including 40 mm dia GI lightgrade pipe from upper end of earth plate upto equipments,20 dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe andPlain Cement Concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and Reinforced Cement Concrete pit cover 50mm thick precast Reinforced Cement Concrete 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in Electrical Plate No.3 of SSR Part I complete all as specified and directed and testing on completion.[Note : If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.] 142 S&F in repairs of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythene ball screwed for irom pipe 25 mm bore dia with fly nut, complete all as specified and directed. 143 S&F in repairs 25mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings, complete all as specified and directed including taking down old unseviceable pipe. 144 S&F in repairs 40mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings, complete all as specified and directed including taking down old unseviceable pipe. 145 S&F in repairs 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes, complete all as specified and directed. 146 S&F 40 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes, complete all as specified and directed. 147 S&F in repairs capacity 500 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top) 3 layered, white, anti-virus, anti-bacteria, anti-fungal, anti-algae, threaded lid with UV protection, anti microbial, complete including provision of all inlet outlet overflow and drain pipe fittingincluding taking down unserviceable tank, complete all as specified and directed. 148 M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmm x 4core laying properly in treanche, complete all as specified and directed. 149 Excavation in trenches not exceeding 1.5m wide and not exc.1.5m depth and getting out in soft/loose soil, complete all as specified and directed. 150 Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil, complete all as specified and directed. 151 Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. 152 Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying, complete all as specified and directed.[Note : Punned thickness shall be measured.] 153 M&L Sub class B fly ash bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete, complete all as specified and directed. 154 S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc., complete all as specified and directed.
Contract Date: Feb 12, 2026 Contract Value : 89.14 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
West Bengal View Result →
39.
Defence #9578046 AOC
Tender For Provn Of Toilet Near Bldg No. P-3 And Spl Rep To Dronacharya Hall, Street Light In Aop Area, Internal Wiring Bldg No.P-2 And 150 Hp Pump At Waldevi Under Ge Nasik Road Camp; 1 Surface excavation n. exc 30cm deep and averaging 15 cm deep & getting out in soft/loose soil all as specified and as directed. 2 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed. 3 Excavating in trenches, n exc 1.5 m wide andexc 1.5 m to n exc 3.00 in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on planand getting out in hard/densesoil complete all as specified and as directed. 4 M and L for Cement concrete type D2 (1:4:8) using 40mm graded stone aggregates as in foundation lean concrete complete all as specified and as directed. 5 M and L for brick work fly ash brick with old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. 6 M and L brick work fly ash brick with old size brick straight or curved on plan to any radius in half brick thick walls, built in 1:4 complete all as specified and as directed. 7 S&F Damp proof course 20 mm thick in cm (1:2) mix with integral water proofing compound over a coat of blown bitumen of1.5 kg per sqm blended with clean sand@ 0.05 cum per sqm. 8 M&L for rendering 15mm thick in cement mortar(1:6) on Stone masonry surfaces, concrete surfaces orfair faces of brick workand finishing even and smooth 9 M&L for preparation of plastered surfaces of walls and applying two coat of oil bound distemper over a coat chalk whitening primer with 3mm thick of wall care putty prepatory to distemper on walls.Make: Asian tractor UNO/Berger bison acrylic distemper/Nerolac beauty. (Note- preparation on wall putty with grit sandpaper (120) for initial sanding and thereafter switching to fine grit sandpaper (180-220) for finishing touch, sanded machine will be applied on internal walls wherever directed by Engineer-in-Charge) 10 M&L rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement 11 M&L forpreparation of newly plastered surfaces of wallsand applying two coats of Acrylic weather proofexterior paint over water based primer complete all as specified and directed Make:Berger weather coat long life 10/ Asian apex ultima/Nerolac excel no dust 12 Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed 13 M and L moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed. 14 M and L for hardcore of gauge n.exc 63mm deposited, spread in layers n.exc 15 cm thick,watered and rammed to a true surface complete all as specified and as directed. 15 M and L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base floorfinised etc complete all as specified and as directed. 16 M & L for mild steel TMT bars 10mm dia and over cut to length bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality coinforming to IS complete all as specified and as directed. 17 M & L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirupps,spacers and binders complete all as specified and as directed. 18 M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm grade stone aggregate as in plinth protection finished even andsmooth without using extra cement complete all as specified and as directed. 19 M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors over 15mm thick cement screed bed in cm 1:6 set and jointed in neet cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed. 20 M & L for glazed coloured ceramic tiles 600x300x7 mm thick as in verticle surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 cm thick plaster incm 1:4 complete all as specified and as directed. 21 S&F for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeMake : ECHON/Sintex/Rajshree/Navaratan Note : Rate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . 22 S&F 30 mm thick moulded Prelaminatedboth side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on front side with wood grain texture on front and plain on back side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) . 23 S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed by Engr-in-charge 24 Material & Labour for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of new steel surfaces all as specified and directed by Engr-in-charge 25 M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width n exc 10cm all as specified and directed by Engr-in-charge 26 S&F 100 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed. approved by Engineer-in-Charge 27 S&F stainless steeltower bolt 150 mm long complete all as specified and directed approved by Engineer-in-Charge. 28 S&F 150 mm stainless steelhandels pull type complete all as specified and directed approved by Engineer-in-Charge. 29 S&F stainless steelsliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed 30 S and F rotational moulded three layers polyethylene water storage tank capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. 31 S and F 20mm bore ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed. 32 S and F 20mm bore Gun-metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. 33 M and L cutting existing steel tubing for alterations or addtions (Each cut measured) for 20mm bore of pipe all as specified and as directed. 34 S and F of 15mm bore steel tube medium grade galvanised, with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. 35 S and F of 20mm bore steel tube medium grade galvanised, with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. 36 S and F of 25mm bore steel tube medium grade galvanised, with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. 37 S and F bib taps, cast copper alloy 15mm bore, screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. (Cat No. Cera QT F2006151 or equivalent in kohlar, grohe and Roca ) 38 S&F in repair 15mm dia brass chromium plated two waybib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make : Jaguar Cat Part No: FLR 5041 Nor equivalent in kohlar, grohe and Roca . 39 S & F15 mm size chromium plated swan neck typePillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed Make : Cera Cat No F2014104 or equivalent in kohlar, grohe and Roca . 40 S & F stop valves, cast copper alloy 15mm bore, screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 41 S and F vitreous china water closet squating pan Orissa pattern 580 X 440mm white with integral foot restand P/S trap complete including lime concrete bedding complete all as specified and as directed.Make : Cera Cat No S3010110) or equivalent in kohlar, grohe and Roca . 42 S & Fvitreous china counter type oval shape wash basin, snow white, size 560 X 470x190 mm or equivalentincluding cutting for and pinning in for bracket and 32mm dia CP waste coupling with wall mount stainless steel chrome finish 450mmbottle trap set with waste outlet pipeand connection to drain pipe complete all as specified and as directed.(Cat No. Cera S2030104_13 or equivalent in kohlar, grohe and Roca . 43 S & F Vitreous china wash down water closet (pedestal pattern) of size 520x360x390mm , snow white including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel choromium plated or aluminium hinging device complete fixed. Make : Cera Cat No. S1053101 S trap or equivalent in kohlar, grohe and Roca . 44 S & F CP health faucet ABS body suitable for 15mm bore with 1.00m SS braided flexible connection pipeand wall hookcomplete all as specified and as directed. 45 Supply and fixing PVC valveless, syphonic action type, flushing cistern, lowlevel of 10 ltr capacity, SNOW white with inlet, ball valve, float and handle including brackets the exposed surfaces of brakets shall be painted with two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed. Make:Cera Cat No. B1010109 46 S & F 75mm PVC (SWR) vent cowl all as specified and as directed. 47 S & F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and as directed. 48 S&F5mm thick mirrors with fixed with stainless steel bolt & nut and fixed to brick/stone masonry walls built in cement mortor etc complete all as directed. 49 S&F brass chromium plated SS single towel rail 600mm long Cat Part No. CAN-1111SM of Jaquar or or equivalent in kohlar, grohe and Roca. 50 S & F PVC Connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. 51 S & F 75mm bore PVC (SWR) pipes single socketed,in any length with rubber ring joint and fixing adhessive with all fittings, including allfixed to walls complete all as specified and as directed. 52 S & F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors with all fittings complete all as specified and as directed. 53 S & F 110mm bore PVC (SWR) bends complete all as specified and as directed. 54 S & F 75mm bore PVC (SWR) bends complete all as specified and as directed. 55 S & F 75mm bore with access door complete all as specified and as directed. 56 S andF 110mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed. 57 S andF 75mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed. 58 S andF75mm PVC (SWR) couplercomplete all as specified and as directed. 59 S andF110 mm PVC (SWR) couplercomplete all as specified and as directed. 60 S andF110 mm PVC (SWR) vent cowlcomplete all as specified and as directed. 61 S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 62 S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 63 S & FCP soap dishcomplete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca 64 M & L machine cut cudappa stone slab 20-25 mm thick in urinal partition and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specifiedand directed. 65 M&L granite (of any type)work (table rubbed and polished) 20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granitecomplete all as specified and as directed. 66 M&L for Kota stone slab 10-15mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with gray cement slurry with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 67 M&L Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed 68 Rounding to edges of stone slabs one edge such as insteps cooking platform and other similar workcomplete all as specified and as directed. 69 S&F powder coated of powder coating 50 micron sliding window, three trackshutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass of 4mm thick black tinted and stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperature 1.40mm, size ofside rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37complete all as specified and as directed. 70 S&F for powder coated of powder coating 50 micron aluminium ventilator shutters with frame not less than 0.45Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frostedglass and outer side fixed with stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperature 1.40mm, shutters aluminium sections weighing 0.45 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. 71 Supply only liquid water proofing. 72 S & F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated of approved profile steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specfied and as directed. 73 S & F pre-painted galvalume aluminium zinc coating AZ-150 grade GI based plain steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specfied and as directed. (Make -JSW Colouron + or Tata) 74 S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 75 S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, or M S tubular sectionsetc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge 76 S&F rolled mild steel plain angle cleats and plate for securing purlins to ragfter and similar small articals confirming to Fe-410-0 or Fe -310-0 complete all as specified and directed 77 Providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) in manhole cover slabplaced complete all as specified and as directed. 78 M andL for plain cement concrete 1:2:4 type B1 using 40 mm graded stone aggregate as in benching and surface channel of manhole complete all as specified and as directed. 79 M and L for extra for forming fair finished drain or channel using extra cement up to 30 cm inner girth complete all as specified and as directed. 80 M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed 81 M&L for Machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 55 to 60 mm thickness M-30 grade laid over and including 30 mm thick stone dust cushioncomplete all as specified & directed. 82 S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors all as specified and directed by Engr-in-charge 83 Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified and directed 84 Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for incl cutting of reinforced steelcomplete all as specified and directed 85 Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed. 86 S & F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated of approved profile steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws with washercomplete all as specified and directed 87 S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed 88 M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed 89 Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc. all as specified and directed by Engr-in-charge 90 S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. all as specified and directed by Engr-in-charge 91 S& F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde E- 250) quality A all as specified and directed by Engr-in-charge 92 Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortarincluding all quoins, arches, pillers etc but includingashlar facings, dressed stone work and precast concrete articles all as specified and directed by Engr-in-charge 93 M&L for Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6complete all as specifed and directed 94 M&L rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement complete all as specifed and directed 95 M&L for preparating newly plastered surfaces of wallsand applying two coats of Acrylic weather proofexterior paint over water based primer including prepare of surface complete all as specified and directed 96 Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work all as specified and directed by Engr-in-charge 97 M&L for complete removal of existing wall surfaces including preparation (i.e. brooming down on plastered / unplastered surfaces complete) and applying two coat of Acrylic weather proofexterior paint over water based primer(Make: APEX of Asian Paint or equivalent) complete all as specified and directed. 98 Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land 99 M&L for rendering 15 mm thick (1: 6) on fair faces of brick/stone work or concrete surfaces finished even and smooth without using extra cement 100 M&L for preparating newly plastered surfaces of walls and applying two coats of OBD over one coat of chalk whitning, prepatory to distempering complete all as specified and directed. 101 Dismantling wall and ceiling boards (Fibre, pulp, insulation etc) orinsulation boards any thickness including cover fillets and framework complete all as specified & directed. 102 Supplying and Fixing acoustic ceiling board of size 600x600X15 mmhas excellent noise absorption upto 0.90 NRC as per ISO can be installed on T-24 grid system of 0.6mm thick Main ‘T’ length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross ‘T’ of length 600mm web minimum 35mm inter locked, 4mm dia GI Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, Specially designed for Acoustic Vibration management and long life complete all as specified & directed. (Cat No. Armstrong Optra FG pebble G600W060615 or G600W060615MLS) 103 S& F NAVRTAN SPECIALITY CHEMICALS LLP, GIZA BRAND PVC sheet wall panelling of thickness 5mm prelam PVC sheet consisting of panels having size 1220x2440mm stuck on inner frame work of 50mm wide strips of 5mm thick PVC sheet. The strips should have in their centre a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10 between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panel for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places whrere two panels are joined, using solvent complete all as specified & directed. 104 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge. 105 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge. 106 Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge. 107 M&L for dismantling of existing octagonal pole 7 mtr height including street light fittings, bracket arm and shifting of pole to baundary wall near by post no 8 complete with excavation, RCC foundation of as per drawing (Bajaj Make), anchor bolts, nuts and washers complete all as specified and directed.Note : Rate for RCC foundation as per drawing, Excavation, returning filling, 7mtr pole, bracket, foundation anchor bolts and nuts included in this item rate. 108 Supply, fixing, install and testing of 7 mtr height, top outer dia 105 mm, bottom outer dia 215 mm, translucent conical pole glass fibre reinforced with polymer matrix combination of fibre glass and resin making it a strong having a highest technology has filament winding by using CNC method, glass content of 65 to 70 %, specific garvity 1.42g/CC, dieleectric strength 40 KV/mm, tensile strength 225Mpa, water absorption 0.3% flexural strength 269mpa, Izod impact strength of 80 k/Jm², barcol hardness of 45 BHU, Tensile module of 9000Mpa, Surface resistivity of 1.6x1016Ω, tensile modules of elasticity 22918 N/mm² complete including shockproof, maintenance free, Non conductive, light in weight, wind speed sustainability is 150 KM/H, base plate is made in GFRP material with customized LOGO and LED strips (LED strip colour specified by Engineer in Charge) complet all as specified and directed.Note : Rate for LED strips, RCC foundation as per drawing provided by OEM, Excavation, returning filling, 7mtr pole, decorative arm 1 mtr long, junction box, foundation bolts and nuts included in this item rate. 109 M&L for dismantling of existing steel poles/ struts, any size. 110 Supply and fixing in replacement of 10 Sqmm, 1100 volts grade, heavy duty, stranded conductor, 2 core cable PVC insulated aluminium conductor served with inner sheathing of PVC sheathed in service connections complete all as specified and directed. 111 Supply and fixingtimelite distribution board digital time switch 32 Amp, 3 pole 230 volts cat ref TL032DB0 of IndoAsian or equivalent complete including Contactor and Digital type time switchcomplete all as specified and as directed. 112 Supply and fixing in replacement ofEnergy efficient LED Street/ Roadway with PDC housing luminaire, high PF, 60W, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, clear toughned glass, IP 66 protection, 4KV inbuilt surge protection, 240 Volts, 120 lumens/watt, colour temp. 5700K, of Cat Part No ENXT P72L WH PO PC SD MT of make Bajaj or equivalent complete all as specified and directed. 113 Supply, fixing and laying in replacement of in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 4 core 16 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire and overall sheathedincluding cablegland, lugs, jointingmaterialetc,jointing, connecting,testingandcommissioning allasspecified and directed. 114 Material and labour for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mmincluding 90 degree bends with coupler and rubber ringlaid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmmcablecomplete all as specified and directed. 115 Demolition of PCC of any description above/below ground level exceeding 15cm complete all as specified and directed by Engr-in-Charge. 116 Suuply and fixing in replacement of machine pressed precast interlocking paver block any size and shape of 60 mm thickness M-40 grade confirming to IS: 15658-2006 with grey cement and pigment and vibrated with mechanical vibrator, with 30mm thick crushed sand for cushioning all as directed.Note :- (i) Rate include for dismantling of existing interlocking paver block including PCC work. 117 M&LforPCC 1:2:4 type C1 using 20mmgradedaggregateforpaver block includingnecessaryform workandfair finishingofexposedsurface of concrete allasspecified and directed. 118 M&L for dismantling of existing kerb stone and Supply and Fixing of LED Kerb stone of size 500 MM x 150 MM x 200 MM made of PE Engineered plastic with LED PCB strip mounted with 2835 SMD and 100 R resistor soldered on PCB with male and female connectors of IP 68 rating for interconnection between two Kerb stones and one power supply of 240V AC, 36V-DC of meanwell make. The Kerb stone should be integrated with M10 inserts in the kerbs leg supports for easily fixing in the ground using M10 anchor fasteners duly drilling in the ground and fixing with required cement mixture /epoxy as per direction of Engineer in charge. Warranty of minium 1 year, having adequate number of connectors and power supply kit for necessary connection including wire and other material as required at site as per manufacturers instructions including necessary excavation and cement concrete. The rate includes of required components for connection from the main electric supply. The product should be ISO 9001:2015 certificate for quality checks. Seller should have manufacturers authoriasation. Load bearing capacity should be miniumun 850/Kg Sq inch. Note : Items required for connections to main electric supply from near by electric sources to be included in the quoted rates complete all as specified and directed.Make : Shriyas Electricals and Power Solutions or Signkraft or equivalent. 119 Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets, main switchesmaterials to store & making good of disturb surfaces of wall/floors etc as specified & directed. 120 Point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:- Note :-Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc. 121 (a) One light point/ fan point controlled by one, one way switch. 122 (b) One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified. 123 (c) All as per ser item No. 120.01 herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes. 124 (d) All as per ser item No. 120.01 here in before but on independent board. 125 Point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) of adequate size and its accessories with PVC boxes of adequate size, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominalarea) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:- 126 (a)One light point and one fan point controlled by one, one way swtich. 127 (b) All as per ser item No. 121.01 herein before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals includingFibre insulation boards, treated on one face only of adequate size for mounting purposes. 128 Supply and fixingswitch modular type 6 Amps one way, 1 module,AC 230 Volts, shrouded terminal, ISI marked complete all as specified and directed. 129 Supply and fixingmodular type socket 6 Amps 3 pin round socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed. 130 Supply and fixing switch modular type 16 Amps one way, 1 module,AC 230 Volts, LED based indicator, shrouded terminal, ISI marked complete all as specified and directed. 131 Supply and fixing modular type socket 6 Amps/ 16 Amp 3 pin socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed. 132 Supply and fixing invertor LED bulkhead 10 watt 220 volts AC with IP 65 protection with inbuilt battery back-up complete with drivers, clamps and accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. 133 Supply and fix ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. Make - Havells /Anchor / Legrand. 134 Supply and fixing modular type fan 8 step regulator, 100 watt, AC 230 Volts, 2module, laser marking complete all as specified and directed. . 135 Supply and fixing LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed type fittings, IP 20 with epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. 136 M&L for safely disconnecting of existing LED panel light fittings 36 watt and kept aside for re-fixing after completion of B/R nature ceiling work complete replacement of 3 core copper conductor wire from ceiling rose to light fittings all as specified and directed by Engineer in Charge. 137 Supply and fixing30 Watt LED security light fitting luminaire, 130lumens/watt, power factor more than 0.95, surge protection 4KV, energy saving and environmental friendly long life LED street light made up of PDC housing with IP 66 ingress protection and Impact protection IK 08, complete includingfixing arrangement in existing pipe and connecting up with 2/3 core flexible coppper conductor cable and all as specified by Engr-in-Charge. 138 Supply and fixing LED 20 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and as directed. 139 Supply and fixingLED round shape 15 watt 220 volts AC recessed /Surface mounted type with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps and suitable size as per ground requirement complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizecomplete all as specified and as directed. 140 Supply and fixingsheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP)complete all as specified. Make- L&T/ ABB/ Legrand/ Schenider. 141 S&F in replacement of On Load change over switch of capacity 125 Amp, 4 pole, 415 volts, in sheet steel enclosure with extended handle complete all as specified and directed.. 142 Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty concealed conduit including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. 143 Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty concealed conduit including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. 144 Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 16 Sqmm drawn through in and including PVC heavy duty concealed conduit including 16 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. 145 Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty concealed conduit including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. 146 Material and labour for in replacement of MS box of size 180x120x30 cm depth, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of MCCB, DBs, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealled and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box with MCCB DBs and electric meters and refixing the same MCCB, DBs and electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing completed all as directed by Engr-in-Charge. 147 Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 4 way with 200 Amps rated busbar all as specified and directed. 148 Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 8 way with 200 Amps rated busbar all as specified and directed. 149 Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCBs 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed. 150 Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCBs 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed. Make - Hager CP No VYS08D or Legrand/ ABB. 151 Supply and fixing in replacement 4 Pole MCCB 125 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 25 KA. Make - Hager CP No HHA126U or Schnider/ Legrand. 152 Supply and fix in replacement MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KAMake - Hager of CP No NBN463N or Legrand /ABB. 153 Supply and fixing in replacement of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA.Make - Hager CP No NBN232N or Legrand/ ABB. 154 Supply and fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA.Make - Hager CP No NBN132N or Legrand/ ABB. 155 Material & Labour in replacement of Earthing complete withgalvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPMweightnot less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm,excavation and earth work in anytype of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete allto as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion. 156 Supply and fixing of LED 10 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose. 157 Supply and fixinf in replacement of LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with battery backup and tri-colour CCT with remote control, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. 158 Supply and fixing in replacement of sheet metal enclosureswith plug socket triple pole and earth enclosure with three pin and earth plug with socket, 415 volts complete with one MCB of 32 Amps (TP)complete all as specified. Make- L&T/ ABB/ Legrand/ Schenider. 159 Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty surface casing caping including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.Note :- (i)Four runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii)PVC casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc. 160 Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.Note for Srl item No 12 & 13 :- (i)Four runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii)PVC casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc. 161 Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. 162 Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.Note for Srl item No 14 & 15 herein before :- (i)Two runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii)PVC casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc. 163 Supply and fixing in replacement MCCB 63 Amp TP,415 volts 16KA. Make - Hager CP No HDA063U or Schnider/ Legrand. 164 Supply and fixing in replacement of 35 Watt LED Security light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with bracket of adequate size complte IP66 protection and impact resistance of IK08.E68 , including coneecting up with 2/3 core flexible coppper conductor cable, compete all as specified and directed by Engr-in-Charge. 165 Supply and fixing in replacement of metal box MS enclosure made out of CRCA sheet 3.00mm thick of size 500mm x 500mm x 300mm depth complete with three phase and neutral aluminium bus bar of capacity 200 Amps and fixing of 3P, 100A MCCB for incoming and MCB SPN 20 Amp - 6 Nos for outgoing mounted on epoxy insulators, fixing arrangement with suitable MS Clamps of size 32 x 6 mm thick all as specified and directed.Note : Rate for MCCB 100 Amp, MCB SPN 20 Amp 6 Nos, Aluminium Busbar 3 pole and 1 neutral of 200 Amp, epoxy insulators and MS clamps of size 32 x 6mm included in this item rate. 166 Material and labour for in replacement of MS box of size 160x120x30 cm depth, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of MCCB, DBs, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealled and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box with MCCB DBs and electric meters and refixing the same MCCB, DBs and electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing completed all as directed by Engr-in-Charge. 167 Supply and fixing in replacement of Mild Steel 3 Meter Decorative Garden Light Poles double bracket for gardens including borage NX series decorative luminaire 60 watt, 3000K with die cast aluminium with UV stabilized clear PC diffuser with decorative crown complete with excavation work and PCC foundation work 1:2:4 of adequate size for installation of mast pole complete all as specified and directed by Engr in Charge. 168 S & F in replacement of PVCweather proof, hinged door, junction box with 200A Aluminium bus bar, 415V, Neutral link and 1No MCB SP of 6 Amps, necessary fixing arrangement such as clamps, nut, bolts, etc including dismantling old unservieable junction box allasspecified and directed. Make : Sintex, Cat No. GSJB 2014 or Hensel. 169 Supply, fixing and laying in replacement of in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 3.5 core50 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire and overall sheathedincluding cablegland, lugs, jointingmaterialetc,jointing, connecting,testingandcommissioning allasspecified and directed. 170 Supply and fixing Galvanised Steel water tubing, (ISI Marked) medium grade of 25 mm bore with and including all fittings and fixtures such as GI bends, tee, union etc, in trenches/on wall complete and connecting to water supply pipe line and testing all as specified and as directed by the Engineer-in-Charge. 171 Supply and fixing Gun metal, globe or gate valves, (ISI marked ) suitable for 25mm dia pipe with iron wheel head screwed both end for iron pipe and fixed for (externally threaded) complete all as specified and directed. 172 M & L for drilling and tapping existing CI/GI pipe line upto 150 mm dia for taking branch connections of 25mm dia pipe including all necessary GI fittings, jointing material, earth work, etc.complete all as specified and directed. 173 M & L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure. 174 Supply, laying and jointing, LT under ground cable, 10 sqmm 2 core, 1100 volts grade, XLPE insulated, armoured with galvanised round steel wire, electric power cables heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts, fixed on poles/walls with proper size saddles and clamp laid under roads/path/drain/culverts complete all as specified and directed. 175 M & L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure. 176 M & LEarthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4.0 mm dia, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 15 mm, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh andearth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”. 177 Supply and fixing of distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCBs 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed. 178 Supply and fixing of MCB DP/SPN 32 Amps, 430 Volts, 50 Hz with 10 KA. 179 Supply and fixing of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA.Make - Hager CP No NBN132N or Legrand/ ABB. 180 Supply and fixing of 35 Watt LED security light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with bracket of adequate size complte IP66 protection and impact resistance of IK08.E68 , including coneecting up with 2/3 core flexible coppper conductor cable, compete all as specified and directed by Engr-in-Charge. 181 Supply and fixing exhaust fan 300mm sweep, 1400RPM, single phase, heavy duty including fixing of mounting frame in the round hole cutting in wall and making good the disturbed surfaces, fixing by means of rugged bolts, nuts and washers etc on the round hole cut in wall, including three core copper conductor flexible cord of 1.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of exhaust fan suitable on working AC, SP 230 V electric supply including GI louver shutters complete all as specified and as directed. 182 Taking out unserviceable Centrifugal pump and Induction Motor 150 HP from its foundation by dismantling cables,earthing connection ,nut bolts etc from waldevi pump house and shifting the C/F by using T & P (Vech,Cranes etc) to MES Yard complete all as directedNote :-Quotated rates includes all T & Prequired for the shifting of Centrifugal pump including induction motor 183 Taking out unserviceableStarter pnel from its foundation by dismantling cables,earthing connection ,nut bolts etc from waldevi pump house complete all as directed Note :-Quotated rates includes all T & Prequired for dismantling Starter panel 184 Supply and Install of 150HP KirloskarHorizontal Split Case Corrocoated Energy Efficiency pumpset DSM 150x45with energy efficienct motor, Casing CI ,Impeller-Bronze,Shaft-CS40C8,Shaft Sleeves-Bronzewith Special Corrocoating to pump with internals of rotating assly Impeller andinsert,top and bottom Casing should be Corrocoated with special coat as per the std of pump and efficiency & protection against corrosion protection and complete acessories at Waldevi pumping Station with following contions:- 185 Kirloskar make Horizontal Split Case,Pumpset Assembly in Special construction suitable to Discharge 30,000 GPH at 80 to 100 mtr Head Pumpset Consist of:- 1. Complete pump Assembly 2. 3 ph, 415V,Squarril Cage Induction motor 3. Fabricated base frame/Plate for installation of pump & Motor4. Flexible Coupling5 Coupling Guard/Foundation boltsCorrocoat Specification: 1. Coating and thickness internal: corroglass 600 series+Fluiglide system ( Corrocoat EA+ Corrocoat EB base coat & Flugilde E as top coat) total system thickness 1.5 mm DFT2. The coating material shall be suitable for efficiency improvement and corrosion protection3.Surface preparation: by abrasive blastingas per Sa2.5/Sa3.0 186 Supply,installation, testing and commissioning (CPRI Approved) factory fabricated,indoor type,LT panel board made out of 2.00 mm thick CRCA Sheet CRCA Sheet with dust and vermin proof double door with front side openable,including noprene rubber gasket ,suitable for 440 volts 3 phase 4 wire system ,including Danger plate,Earthing Strippoint and ventilation louvers at rear side,bottom detachable gland plate complete with suitable size zinc chromium plated nuts,bolts and washers etc and embadded with 50 x 50 x 6 mm mild steel angle iron frame and 600 mm above tne normal ground level complete with PCC foundation in cement concrete 1:3:6 (20mm graded aggregate) and testing after installation including complete all as specified and comprising of 150 HP Soft starter panel with incommer MCCB 400A, TP, Thermal Maganatic 36 KA,RYB, ON off Trip indicator,MFM,RPM meter, contactor and Panel power coated Ral 7032complete all as specified and comprising of following:- Suitable for 150HP fully automatic star delta starter 187 INCOMING:-(i)Bus bar chamber comparising 4 Nos Aluminium Strip bus bar air insulated and PVC sheathed Capacity 800 Amps with colour coding in separate sheet enclsure(ii) MCCB with thermal based release 4 pole ,400 Amps ,50 Hz 36 KA-01 No (I/C) (iii) Digital multi function panel mounted meter for energy monitoring to display Voltage ,Current,Active power,reactive power,apperent power,power factor,frequency and all other paramater including necessary CTs,PTs and fuses and wiring-01 No(iv) LED type /neon type indicating lamp panel mounted type RYB-03 Nos(v) Single Phase preventer-01 Nos 188 OUTGOING(i) MNX 140 (CS94138) -03 Nos(ii) ADD ON Block 2NO=2NC -03 Nos(iii) Relay (90-150) (SS94138OOMO)-01 Nos (iv) Timer S/D (12SDTO)-01 Nos (v) Control Transformer-Control MCB 2P,6A(vi) Internal distrubtion -with suitable size bus bar As Reqd(vii) Copper bus bar of suitable capacity (viii) MS Stand -400 mm 189 Material and labour for earthing complete with galvanised steel plate electrodes of size 600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised32x 6 mmearth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 40 mm bore (Medium grade) allas directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar,including funnel, wire mesh and 20 mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all as specified and directed. 190 Supply and fixgalvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment completefixed on pocelain insulator every 1 meter interval all as specified and as directed. 191 Supply, laying,testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded Copper conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/MDB in building etc to suit the cableincluding material and labour for all jointing/connecting material as requiredsize, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall complete of50 Sqmm Single Core 192 Material and Labour for DWC pipe of outer dia 77mm and inner dia 63 mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50mm suitable for cable protection complete all as specified and direct.
Contract Date: Feb 12, 2026 Contract Value : 76.76 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Maharashtra View Result →
40.
Defence #9578018 AOC
Tender For Special Repair To Bldg No T-01 To T-04 Of Camble House Under Ge Clement Town Dehradun; 1 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 2 M&L for brick work with old size full bricksubclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. 3 M&L for Rubber moulded coloured glossy finish chequered cement concrete tiles, ISI Marked, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15 mm thick screed bed in cement mortar (1:4) including demolition of old PCC/chequered for following size of tile complete all as specified and as directed:- 4 30cm x 30cm x 20mm thick 5 M&L for 75 mm thick PCC (1:4:8) type D2, (using 40 mm graded stone agg) as in sub base of floor/ hardstanding/ footpath laid in panel finished even and fair without using extra cement complete all as specified and directed. 6 Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises from MoD land complete all as specified and as directed. 7 M&L for 25 mm thick PCC (1:2:4) type B0(using 12.5 mm graded stone agg) as in sub base of floor complete all as specified and directed. 8 M&L for non skid, joint free, coloured endura tiles7-8mm thick (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match thetiles laid with and including over 15mm thick screed bed in CM (1:6), area of each tiles shall be of following complete all as specified and directed :- 9 Area of each tile exc 0.06 Sqm but not exc 0.11 Sqm. 10 M&L for coloured vitrified tiles of any design and pattern, double charged, 9 to10 mm thick, as in floor etc incl 15 mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption less than 0.05%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects and area of each is as following complete all as specified and directed :-Note: Shade of the tiles including Colour, design and pattern shall be got approved by GE/ AGE(I). 11 Area of each tile notexc 0.36 sqm. 12 Description same all as per item No. 8 but as in riser of steps, skirting, dado and pillaretc with and includind over 10mm thick rendering in CM (1:4) complete all as specified and directed. 13 M&L for non skid, joint free, coloured ceramic tiles7-8mm thick (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:6), area of each tiles shall be of following complete all as specified and directed :- 14 Area of each tile exc 0.11 Sqm but not exc 0.18 Sqm. 15 M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8mmthick, as in dado etc including 10mm thick rendering in CM (1:4), set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed.Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) 16 M&L for 20 mm thick granite stone slab (of any type) work (table rubbed and mirror finish polished) with and including necessay notching, chamfering the edges in steps, jambs, pillars, window-cills, cooking platforms and like bedded over and including 15mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 17 Demolition of PCC in ground floorand pavings not exc 15 cm thickness below or above ground levelincluding removal of rubbish out side MOD land complete all as specified and directed. 18 M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interwal and corner complete all as specified and directed.Note : Joint to be provided at each interval of 3m and corner and cost of the same deemed included in quoted rate. 19 Dismantling of timber scantling 40 sqcm and over in section, in any position as in unframed work complete all as specified and as directed. 20 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 21 S&F mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 with and including one shop coat of zinc chrominium primer paint complete all as specified and as directed.Note : The rates quoted deemed included for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete. 22 M&L for twocoats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed. 23 M&L for PCC (1:4:8) Type D2 (using 40 mm graded stone aggre-gate) as in foundations, filling and mass-concretecomplete all as specified and directed. 24 Excavating in post holes (or similar holes) in soft/ loose soil, each n.exc 0.5 cum, getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed. 25 Dismantling of asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. 26 S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 27 S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ-150 as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 28 Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc. or for shafts, well, cesspits, manholes, Pier holes,etc. / for laying of cable/ pipe etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. 29 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed. 30 Removal of surplus soil to a distance n exc. 50 Mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. 31 M&L for PCC (1:2:4) type B-0, using 12.5mm graded stone aggregates, as in roof kerb/ benching/ coping, bed plates, for fixing of hold fast,water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. 32 Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed. 33 M&L for 15mm thick plastering on fair faces of brick wall in CM (1:6) surface finished even and smooth with out using extra cement complete all as specified and directed. 34 M&L for 15mm thick plastering on fair faces of brick wall in CM (1:4) surface finished even and fair complete all as specified and directed. 35 M&L for preparation of newly plastered surface of wall and applying two coatoil bound distemper over a coat of wall primer over and including 1 mm thick wall care putty on wallcomplete all as specified and directed. 36 M&L applying Two coat of exterior emulsionacrylicpaint ofshade as approved by GE/AGE(I) applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm on wall of newplaster surface including cornices, pilasters etc including preparation of surfaces smooth and evenall as specified and directed. 37 M&L applying Two coat of exterior emulsionacrylicpaint ofshade as approved by GE/AGE(I) applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm on wall of old plaster surface including complete removal of existing tretment including cornices, pilasters etc including preparation of surfaces smooth and evenall as specified and directed. 38 S&F in repair rotational moulded polyethylene water storage tank, white incolour triple layer , ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and20 mm dia Ball valves highpressure of PTMT withepoxy coatedAluminiumrod&high density plastic ballscrewed for iron pipeand fixed.(Minimumweight 15mm-142gms/20mm-210gms./ 25mm-455gms/ 40mm- 690 gms)including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings,including dismantling of old water storage tank and removing from site of following capacity of tank completeall as specified and as directed:- 39 Capacity 1000 Ltrs 40 Taking up or down steel water tubing (GI Pipe)/CPVC and connections of following bore complete all as specified and as directed :- 41 20mm bore 42 32mm bore 43 S&F of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed. 44 S&F of 32 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed. 45 S&F 32 mm outer dia CPVC PP-R gate valve complete all as specified and directed. 46 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:- 47 Area not exc 1.5 sqm each 48 Area exc 1.5 sqm but not exc 4 sqm each 49 M&L Solid (125mm x63 mm Double Rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed. 50 M&L Solid (100mm x63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity nd shall be fixed with 6 Nos 150mm long hole fasternerscomplete all as specified and directed. 51 M&L 30mm thick moulded plain WPC solid door shutter: providing (30mm thick) MOLDED WPC Brown Factory made 100% solid door (Conforming As per IS: 4020) made from 100% LEAD FREE single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/Cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water Water Proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed. 52 S&F 32mm thick brand factory made wire mesh solid WPC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mmx40mm for top, lock & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufactures, 20mmx40mm M.S. square tubes shall be covered with 6mm thick heat moulded WPC prelaminated C channel of size 30mm thickness, 140mm width out of which 125mm shall be flat and 15mm shall be bent in 90 degree on the either side forming stiles & 6mm thick 165mm wide WPC sheet out of which 150mm shall be flat and 15mm shall be bent in 90degree on the inner side to from top & bottom rail and 180mm wide WPC sheet out of which 150mm shall be flat and 15mm shall be bent in 90degree on both side to form lock rail, 12mm (6mm x 2) thick,, 20mm wide cross WPC sheet as gap insert for top rail & bottom rail, Pannel will be of stainless steel, wiremesh of 24 gauge to be fitted in by C channel of size 32mmx10mm on the either side in the stiles, the inner side C channel is fixed by 20mm x 40mm MS tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with 20mm x 40mm tube wiith stainless steel, wire mesh gauge interior at top, bottom & lock rail. 10mm x 20mm stainless steel pipe griill fix with MS frame for support wire mesh as per selected design an additional 6mm thick WPC strip of 22mm width is to be stuck on the interior side of the C channel using solvent cement adhesive etc, complete all as specified and directed. 53 Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes complete all as specified and directed. 54 Hacking out old broken glass (anythickness, size, quality or description)from wooden frames or stone, concreteor brick surrounds, glazed with puttyor fixed with beads complete all as specified and as directed. 55 S&F 4 mm thick sheet glass, ordinary quality and glazing with rubber beading as in door and partition of following size complete all as specified and as directed :- 56 nexc 0.75 sqm in each pane 57 Demolition of wall and ceilingboards ( fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed. 58 S&F Non asbestos fibre cement building boards 4mm thick fixed or laid/ inserted totimber/GI/Aluminium frame work with screws 10 mm thick in aluminium snap grid frame work for false ceiling and hanging with6mm dia GI (upto the 1200 mm length )adjusting level fixed to roof slab by means of ceiling cleats made out of GI flate 40X3mm size 60mm long and expansion hold fasteners 12.50mm dia.40mm dia long complete all as specified and directed 59 S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or wire staples complete all as specified and as directed. 60 M&L for preparation of old plastered surfaces on walland applying two coats of oil emulsion distemperon plastered surfaces over and including 1mm thick of Birla/ JK wall care putty for smooth finish of wall complete all as specified and directed. 61 M&L for preparation of old painted surface of steel material of any description over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed.
Contract Date: Feb 13, 2026 Contract Value : 12.67 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Uttarakhand View Result →
41.
Defence #9526510 AOC
Tender For Special Repair To Building No E-09 At 309 Fd Hosp, Addl/Altn To Parking Shed At Dads Office And Bldg No P-309 At 289 Fd Wksp Coy Under Age B/R-Iii And Age E/M-Ii Of Ge (South) Meerut Cantt.; 1 Demolition ofbrick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed. 2 M&L Brickwork with subclass `B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified & directed. 3 M&L Brickwork with subclass `B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed. 4 Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified & directed. 5 Demolition of cement concrete in ground floor n exc 15 cm in depthin any position nototherwise specifically provided for. 6 M&L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified & directed. 7 M&L coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over & including 15mm thick screed bedin CM 1:6 complete all as specified and directed. 8 Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. 9 M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified & directed. 10 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed. 11 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified & directed. 12 Supply & fixing pressed steel frames for doors with one or more rebates including necessary fittings like lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed. 13 Supply and fixing made plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle board with commercial veneering on both faces, the size of rail at stile as per IS: 1003 Pt-I kiln seasoned and chemically pressure treated complete all as specified 14 Supply and fixing for 35mm thick glazed and skeleton shutters of 2nd class hardwood open nebated and prepaired to receive glass gauge etc, (with sash bars) edgeg of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.20(a) complete all as specified and directed 15 Supply and fixing for stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed by Engr-in-charge. 16 S&F Box type steel window comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube with double side shutters wire gauged shutter & glass glazed shutter including wire cloth 0.36mm nominal dia of wire and avg aperture 1.40mm and 3mm hick glass, ordinary quality glazing with oil putty with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc as including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. 17 Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified & directed. 18 S&F GI snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm GI angles weight 0.36 kg fixed all along the wall at ends and with GI main and cross tee of size 36.50 mm x 25 mm x 1.4 mm width not less than 0.24 kg per RM including GI cleat bolts nuts and washers and 4mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including supply & fixing suitable non asbestos fibre cement boards in ceiling of size 600 mm x 600 mm complete as per approved make complete all as specified & directed. 19 Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed. 20 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. 21 Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. 22 Dismantling timber scantiling 40 Sqcm and over in section in any position complete all as specified and directed. 23 S&F structural steel work as in roof truss/purlin/rafter/post or simillar work, made of tubular/angular(equal/unequal angles/ISMB section/plates as per site requirement) including welding, special shaped washers etc. using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240 complete all as specified and directed. 24 M&L for Plates (plain or chequered) channels,squarecutor notched (ordinaryand countersunk) forming holes, Fe 410-W (Gde-E-250) quality A without any attachment complete all as specified and directed. 25 M&L PCC type B1 (1:2:4) using 20 mm graded aggregate as in hold fast, filling in pressed steel chawkhat,window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns,posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed. 26 S&F 1mm thick mild steel plain, black sheet in wall cladding, steel gates and similior work, cut to size, holes, punched, including round headed screws, eaves boards, clout nails or rivets and fixed to wood or steel framing witn plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed 27 M&L for 5-6mm dia GI wire, fixed with 10mm dia round MS bar,including suitable hooking & Nut/washers at either end, fixing/grounting/inserting in wall for fixing of mosquito net complete all as specified & directed. 28 S&F200mm long, extruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified & directed. 29 S&F 200mm long, aluminium anodised barrel tower bolts of extruded section complete all as specified & directed. 30 S&F 300mm, Mildsteel slidingbolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed 31 S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed. 32 M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and includinga coat of pink primer (by spraying) complete all as specified & directed. 33 M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) complete all as specified & directed. 34 Taking down of cementplaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed. 35 M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. 36 Preparation of old plastered or unplastered surfaces including sraping/removing of existing/old treatment of wall, applying 2mm thick wall care putty, making the surface smooth and applying two coat of oil emulsiondistemper using roller complete all as specified & directed. 37 Preparation of New plastered or unplastered surfaces of wall and applying applying 2mm thick wall care putty, making the surface smooth and applying two coat of oil emulsiondistemper using roller complete all as specified & directed. 38 M&L applying two coats of exterior emulson paint (weather proof) on plastered or unplastered surfaces, using roller over and including applying 2mm thick putty after preparation & scraping the wall surfaces complete all as specified and directed. 39 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed. 40 M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified & directed. 41 Supply and fixing for 20 mm dia mild steelpowder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends as fixed in repairs complete all as specified and directed. 42 S&F factory made 450x1200mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers (In repairs) complete all as specified & directed. 43 M&L for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed. 44 Surface excavation Nexc (not exceeding) 30cm deep and averaging 15cm deep and geeting out in soft/loose soil complete all as specified & directed. 45 M&L hardcore (broken stone or boulders) of gauge nexc 63mm, deposited, spread and levelled in layers nexc 15cm thick, watered and rammed to a true surface complete all as specified & directed. 46 M&L 100mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) as in sub-base complete all as specified & directed. 47 Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. 48 Providing, cement concrete type C-1, 1:3:6 (20mm graded agg)in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating complete all as specified & directed. 49 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified & directed. 50 M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate complete all as specified & directed. 51 Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed. 52 Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. 53 Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. 54 M & L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified & directed. 55 M & L Concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 150mm dia pipe complete all as specified & directed. 56 Material & labour brick work with fly ash bricks in CM 1;6 brickstraight or curved on plain exeeding 6m mean radius complete all as specified & directed. 57 Material & labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified and directed. 58 Material & labour for 10mm thick rendering on other than fair faces of brick work or concrete surfaces,inCM(1:4)surface finished even and smooth without using extra cement complete all as specified and directed. 59 Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfacesfinished even and smooth without using extra cement complete all as specified and directed. 60 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed. 61 M&L Non Skid ceramic tiles7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement joint free non skid tiles.to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed 62 Material & labour for glazed coloured ceramic tiles of size450x300x7-8mm thick,on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed. 63 M&L for preparation of new plastered surfaces of walls etcand applying two coats of cement base paint over a coat of primercomplete all as specified & directed. 64 Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20Kg/Sqm including cleaning surface complete all as specified and directed. 65 M&L for 20mm thick plaster as in padding in cement sand mortar (1:4) with and including liquid water proofing compound as manufactures instructions after and including completely removal of existing water proofing treatment complete all as specified & directed. 66 M&L for cleaning of plastered /concrete surfaces and applying priming coat using bituminous primer @ 0.30 Kg/Sqm. followed by evenly a tack coat @ 1.20 Kg/Sqm. using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.6 Kg/Sqm. unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed. 67 S&F flat iron hold fast 25mm x 6mm welded to angle iron door frame complete all as specified & directed. 68 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed. 69 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified & directed. 70 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made 71 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including stainless steel butt hinges 03 Nos size 100mm, tower bolt aluminium 02 Nos size 150mm long, aluminium alloy handles D type size 150mm 02 Nos for each door complete all as specified and directed. 72 S&F for 110 mm bore PVCfloor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed. 73 S&F20mm Gun-metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified & directed. 74 Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with and including all fittings like inlet/outlet and vent pipe, float valve, gate valve etc and dismantling existing water tanks complete all as specified & directed. 75 Supply & fixbib taps cast copper alloychromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed. 76 Supply & fix angle valve/concealed, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed. 77 Supply & fix invitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) including brackets suitable for 15mm dia pipe, 32mm waste pipe with coupling, Pillar tap swan neck fancy type cast copper alloy with capstan heads chomium platedcomplete all as specified & directed. 78 S&F in repair vitreous China squatting pan,‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) connectiong to trap and to flushing pipe, anti syphonic pipe, etc including making good to floor complete all as specified and directed. 79 Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe with S Trap complete all as specified and directed. 80 Supply & fix inPVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed. 81 Supply & fix invitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified. 82 Supply & fix inPVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. 83 S&F 600mmx750mm fancy type bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. 84 S&F chromium plated fancy shower rose with arm fancy type, 125mm size,complete all as specified & directed. 85 S&F Tubular towel rail 20mm dia, D type, 60cm long between flanges, complete all as specified & directed. 86 S&F 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. 87 S&F 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. 88 S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed. 89 S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed. 90 PVC (SWR), junction single, (Single T) equal or unequal any size mm bore complete all as specified & directed. 91 M&L Soakage wells excavation, of size 2.40mtr dia 3.00mtr effective depth in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete all asspecified in drg No TD-309 sheet 1/4 to 4/4 and as directed by engr-in-charge. 92 Provn of septic tanks, exc in ordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC Slab covers including RCC pre cost man hole cover having 6mm plate embeded all around/fire reinforced ever with angle iron frame vent shaft and sludge chambers etc of capacity 150 users complete all specified in drg No TD-217 sheet 1/7 to 7/7 and as directed by engr-in-charge. 93 S&F Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified & directed. 94 Taking down carefully any type of battens or conduit point wiringwith or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed. 95 Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including new PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for Onelight point controlled by one, one way switch 05 / 06 Amps. 96 All as per iten No 95.00 here-in-before but one fan point controlled by one, one way switch 05 / 06 Amps. 97 All as per iten No 95.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. 98 All as per iten No 95.00 here-in-before butOne 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. 99 All as per iten No 95.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. 100 Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 voltscomplete all as specified & directed. 101 Supply and fix in repair socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed. 102 Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. 103 Supply and fix in repair switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed. 104 Supply and fixing steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified & directed. 105 Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified & directed. 106 Supply and fix LED lamp 9/10 watt complete all as specified & directed. 107 Supply and fixing decorativeLED tube light fitting/warm as directed 1x20 wattsurfacemounting , intigratedwith opal diffusercomplete withallacessoriescomplete all as specified & directed. 108 Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existingand taking down the old unserviceable submain wiring of ant type complete all as specified & directed.Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length). complete all as specified & directed. 109 Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfacesand taking down the old distribution board of any type complete all as specified & directed. 110 Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison forfixing of 1 No MCCB of XT1160 frame suitableupto 160 Amp and 12 Nos MCBS inside of DB,including 100 Amps ,18 KA 4 pole MCCBwith metal door and flush to wall including grouting and cutting in existingwall and making good disturbed surfacewith two coats of white / colour washing / distempering etc to match the existing one complete all as specified & directed. 111 Supply and fixing MCB, SP, AC, 240 volts B series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. 112 Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps10kA and making connections complete all as specified & directed. 113 Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking downold unsv fan & will be deposited to AGE E/M-II (South)yard only 114 Taking down unsv cable ofany type/size and S&F (in repair) , laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. 115 M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed. 116 Material and labour for contineous brick edging withwidth equal to the depth of the brick of whole sub class B bricks laid on edge complete all as specified and directed. 117 Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing IP-66 comprising epoxy powder coated enclosed with glass coverembedded lensin frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed. 118 Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed. 119 Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified and directed.Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department .
Contract Date: Feb 11, 2026 Contract Value : 40.71 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttar Pradesh View Result →
42.
Defence #9526497 AOC
Tender For Special Repair To Smq P 101 At Af Stn Kasauli Under Ge Kasauli; 2 Demolition ofcement concrete (reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, and similar suspended workand removing rubbish/ demolished material outside defence land, complete all as specified and as directed . 3 Material and Labour for form work chulla hoods, chajjas, troughs and similar items including edges for fair finished surface of concrete, complete all as specified. 4 Material and Labour TMT steel bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and as directed. 5 Material and labour for providing reinforced cement concrete 1:2:4 type B0 (using 12.5mm graded mechanically crushed stone aggregate)as chajja, fins, louvers, roof projection ,beam and lintel after removing of all loose concrete andloose plaster, cleaning surface with wire brush to remove all dust/dirt/loose particles to expose old steel reinforcement, applying derusting chemical on exposed steel surfacesuch as Dr fixit rust remover or equivalent and welding additional main bars/distribution bars by insertingto adequate depth in beam, chajjas, etc. complete, all as specified and as directed.Note- 1.The work will be carried out at a height upto 9 metre and necessary scafolding required in the work included in the quoted rate under this item.2.Reinforcement will measured and pid separately. 6 Material and labour rendering 5 mm thick on fair faces of brick work or concrete ceiling or chajjassurfaces in cement mortar 1:3 andfinishedeven and smooth without using extra cement and applyingtwo coats of cement based paint after preparation of newly plastered surfaces of ceiling complete all as specified and as directed.Note- 1.The work will be carried out at a height upto 8 metre and necessary scafolding required in the work included in the quoted rate under this item. 7 Taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc , and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed. 8 Material and labour for rendering 15 mm thick on surface of any description of brick work or concrete wall surfaces in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement or as per manufacturers instruction and finished fair and even without using extra cement complete all as specified and as directed.( Note- The cost of providing WPC shall be included in quoted rate under this item). 9 Material andlabour for 10mm thick rendering in cement mortar (1:6)on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed. 10 Material and labour for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over a coat of chalk whiteningcomplete all as specified and as directed. 11 Material and labour for preparation of new/old (plastered or unplasterd) surfaces of walls, applying 1 mm thick wall care putty white cement basedin two or more coats to achive smooth surfacesand applying two coats of exterior acrylic emulsion, anti weather abd anti algae paint (1st quality), in multi colour or as in(camouflage, if any) as approved, over and including a coat of alkali resistant primer, complete all as specified and directed.Note (s):-(i) Pattern of camouflage if any shall be as approved by GE.(ii)The work will be carried out at a height upto 8 metre and necessary scafolding required in the work included in the quoted rate under this item.(iii) Contractor shall carried out the painting work from the manufacturer of paint or his authorised applicators andalso submit 05 years gurantee certificate against fadding/Peeling of painting work to the department from manufacturer. 12 Material andlabour for complete removal of existing treatment on surfaces of walls by using appropriate technique as approved by Engr-in-chargefor complete removal of all layers of old treatment and reaching upto old plastered surface including filling up all cracks with Shalimar tar plastic (STP) crack filler and also, make good to plastered surface for the area n. exc. 0.01Square metre , if any and applying two coats ofoil bound distemperwith painting rollerover 1mm thick wall care putty white cement based in two or more coats to achive smooth surface over prepared surface complete all as specified and as directed. 13 Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified 14 Material and labourbrick work with sub class B old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. 15 Supply andfixing for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, wind ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290-Gde E-165, complete all as specified and as directed. 16 Supply and fixing 1mm thick and 100mm dia angles (internal or external) or nozzle pieces (Out lets) complete all as specified and as directed. 17 Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat ofred oxide primer complete all as specified and as directed. 18 Supply and fixing 110mm diaUPVC, rain water drain pipe, type ‘A’ ,conforming toIS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified anddirected.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) 19 Supply and fixing 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified.(Note- UPVCbends shall be confirm to BS 4515 DIN 19531 and DIN 19534) 20 Supply and fixing for 110mm diaUPVC, soil waste drain pipe, type ‘B’ ,conforming toIS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified anddirected.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) 21 Supply and fixingin repair, 75mm diaUPVC, soil waste drain pipe, type ‘B’ ,conforming toIS 13592-1992, double socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wallincluding all fittings, heads, shoes, bends, swan necks, etc. complete all as specified anddirected.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) 22 Supply and fixing PVC (SWR) reducers complete all as specified and directed.(Note- UPVCbends shall be confirm to BS 4515 DIN 19531 and DIN 19534) 23 Taking down wooden chowkats or frames area exceeding 1.50 Square metre andnot exceeding 4.00 Square metre (w/o taking off shutters from frames) including iron mongries and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfaces to match with existing finish, complete all as specified and as directed. 24 Taking down wooden chowkats or frames areanot exceeding 1.50 Square metre(w/o taking off shutters from frames) including iron mongries and removing from site, including cutting holes for taking out existing hold fastsand making good the disturbed portion of jambs andadjoining surfaces to match with existing finish, complete all as specified and as directed. 25 Supply and fixing aluminium power coating of approved colour (Thickness or powder coating not less than 50 micron) in frame for doors, windows, ventilator shutters, aluminium with one or more rebates including necessary joining cleats, rubber packing, powder coated snap beading, glazing clips to recieve 5.5 mm thick tinted glass for glazing section, etc. complete all as specified complete all as specified and directedNote : The weight of Aluminium sectons shall not be less than 1.20Kg/Rm. 26 Supplying, fabricating and fixing of powder coated aluminium Windows, Triple Track having three sliding shutters(02 Glass and 01 Guazed) with followingpowder coated aluminium section with and including joining cleats, glazing clips, rubber packaging, snap beading and other necessary builders hardware as required, complete all as specified and as directed.[a] Top and side members for three track frame shall be of size 92.00 x 31.75 x 1.5 mm [b] Three track bottom rail of frame for sliding of shutter shall be of size 92.00 x 31.75 x 1.5 mm [c] Top and bottom rail of sliding shutter shall be of size 40 x 18 x 1.55 mm [d] Side rail of sliding shutter with handle and self locking arrangement section shall be of size 40 x 18 x 1.55 mm [e] Sliding shutter to be provided with 5.5mm thick Tinted Glass.[f] One shutter to be provided with stainless steel wire cloth 0.36mm dia and aperture 1.4mmNote :- (i) The weight of Aluminium sectons shall not be less than 1.2Kg/Rm. (ii) Thickness or powder coating shall not be less than 50 micron (iii) The door/window shall be as per drawings/directions of Engineer-in-charge and drawing may be reffered from GE office.(iv) The cost of Glass and wire mesh shall be included in the quoted rate against this item. 27 Supplying, fabricating and fixing Aluminium Windows, fourTrack, fabricated with powder coated aluminium sections with four sliding shutters(03 Glass and 01 Gazed) with following section including joining cleats, glazing clips, rubber packaging, snap beading and other necessary builders hardware as required all as directed by Engineer incharge : (Length of window more than 1.5M)[a] Top and side members for three track frame shall be of size 92.00 x 31.75 x 1.5 mm [b] Three track bottom rail of frame for sliding of shutter shall be of size 92.00 x 31.75 x 1.5 mm [c] Top and bottom rail of sliding shutter shall be of size 40 x 18 x 1.55 mm [d] Side rail of sliding shutter with handle and self locking arrangement section shall be of size 40 x 18 x 1.55 mm [e] Sliding shutter to be provided with 5.5mm thick Tinted Glass.[f] One shutter to be provided with stainless steel wire cloth 0.36mm dia and aperture 1.4mmNote :- (i) The weight of Aluminium sectons shall not be less than 1.20Kg/R,(ii) Thickness or powder coating shall not be less than 50 micron (iii) The door/window shall be as per drawings/directions of Engineer-in-charge and drawing may be reffered from GE office.(iv) The cost of Glass and wire mesh shall be included in the quoted rate against this item. 28 Supply and fixing Aluminium Powder Coated [Powder coating shall be 50 micron minimum thickness) Sections as in window and ventilator Shutters, Side hung type, without Sash Bar,including necessary Joining Cleats, Glazing Clips, Rubber Packing, powder coated snap beading, Screws, Aluminium fittings such as Peg Stays 150mm Long [1 No], Hinges, Type B-21 100mm Long [2 Nos], Suitable Handle [1 No] to each shutter complete all as specified and directed.Note : The weight of Aluminium sectons shall not be less than 1.20Kg/Rm. 29 Supply and fixing 5.5 mm thick, tinted glass exceeding 0.5 Square metre in each pane to aluminium door/window with glazing clips, rubber gasket etc complete all as specified and as directed. 30 Supply and fixing figured glass 5.5mm thick, pin head type, in square exceeding 0.5 Square metre in each panefixed in aluminium frame as in windows/ventilators, complete all as specified and directed. 31 Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. 32 Supply andfixing aluminium anodized grill 5.5mm thick weight not less than 2.5kg per square (in the shape of expanded metal aluminium xpmjalli) opening size length of expansion (60mm) and width expansion 45mm fixed in aluminium anodized windowwith ‘F’ channel of handle section with screw, complete all as specified and directed. 33 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and directed. 34 S&F,Metal suspended ceiling system OREO GI laid in plain 600X600X0.50 mm (tegular) edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. Note:(i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit at 1200mm maximum centre.The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600 mm mould.Cut cross tees longer than 600mm require independent support. 600X600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm,secured to walls at 450mm maximum centres. (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.50 mmx25/5 with soffit cleat made of galvanised steel of size 27x37x25x1.60mm & level clip in dimensions of 85x30x0.80 mm with 4mm GI wire complete all as specified & directed.Note- Ceiling tiles and ceiling grid shall be of the same make. 35 Dismantling plain or corrugated mild steel sheeting any gauge, thickness, including Nanital or similar pattern roof coveringcomplete, all as specified and directed. 36 Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.50mm thick, conforming to IS-15961 of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed.Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. 37 Supply and fixing ofPre-painted galvalume aluminuim zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed.Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. 38 Dismantling of wrought iron or mild steelwork of any description not otherwise specially providedcomplete all as specified and directed. 39 Supply andfixing mild steel, rolled sections as in main orcross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting platesconforming to grade Fe-410(Gde 250), complete all as specified and directed. 40 Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal the rubbish/ demolished material outside defence land, complete all as specified and directed. 41 Material and labour for applying water proofing treatment to sunken slab comprising of the following specifications complete all as specified.(i)Cleaning of roof surface with mechanical means i.e. wire brush/air blower etc. andremove all loose /unsound material,dirt,dust etc, (ii) 15mm thick cement plaster on concrete surfaces in cement mortar (1:3) using and including water proofing compound @3% by weight of cementfinished even andsmooth without using extra cement,.(iii)Providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry @ 1.3 kg/sqm mixed with acrylic based polymer modified cementitous composit compound coating of make as approved in Technical Instruction 5/2003(iii)First layer of cement slurry @ 0.488 Kg/Sqmmixed with acrylic based polymer modifiedcementitious composite compound @ 0.253 Kg/Sqm of approved make and allowed layer to air cure for 04 hours.(iv)Second layer of cement slurry @ 0.244 Kg/Sqmmixed with acrylic based polymer modifiedcementitious composite compound @ 0.126 Kg/Sqmand allowed layer to air cure for 04 hours followed with water curing for 48 hrs .(v) 200 micron thick polythene film pasted with the hepl of adhesive shall be provided over treatment . 42 item No. 40.00(contd....)Note :-(i)The slope of slab shall be 1:20 towards the corner of outer walls and GI pipe of 40mm dia ( Medium grade ) be inserted at corner projecting out side 20 cm . (ii) Joints of WC/Trap/Soil waste shall be properly sealed with sealing compound(iii) P/S traps and Nahani/Floor traps with long arm shall be provided as per latest instruction .(iv) Testing of all trap & joint and sunken slab shall be as per IS-1742 before filling and tilling of sunken slabs, including smoke test. (v) The water proofing treatment shall be carried out by the manufacturer or his authorised applicators and contractor shall also provide 07 yearsGuranttee forwater proofing treatment carried out in the work. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. 43 Material and labour for PCC 1:5:10 type E-2, using 40 mm graded crushed stone aggregate as in filling in sunken floor, rounded or chamfered on edges complete all as specified and directed . 44 Supply only integral water proofing compound complete all as specified.as directed . 45 Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern)including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device and brass chromium plated Jet spray with PVC pipe andcomplete accessories as in repair, complete all as specified and as directed. 46 Supplyand fixing (in repair) brass chromium plated jet sprayer suitable for water closet pedestal pattern including 90cm long Chromium plated flexible pipe fixed to angle valve 15mm bore, complete all as specified and directed . 47 Supply and fixing 75mm dia of outlet, PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified.(Note- UPVCfittings shall be conforming to BS 4515 DIN 19531 and DIN 19534) 48 Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as levelling course, finished even and fair to receive floor finishes, complete all as specified and directed. Note- This item shall not be executed in the location, where dismantling of tiles work have been done. 49 Supply and fixing 40 mm dia GI pipe , medium grade as in spout for sunken floor, fixed as in wall inside end fixed with wire netting and external bevelled edge at 45 degree, complete allas specified and directed. 50 Demolition ofcement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. 51 Material and labour providing 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection laid in alternatebays (not exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work complete all as specified and as directed. 52 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 53 Material and labour for screed bed or bedding layer of mortar, 15 mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and as directed. 54 Material andlabour for premium quality, joint free, non skid, coloured ceramic 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm tiles, as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over cement screed bed , complete all as specified and as directed. 55 Material and labour for glazed ceramic coloured/printed tiles 450mm x 350mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 10mm thick bedding layer in cement mortar (1:3), complete all as specified and directed. 56 Material andlabour for 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete, all as specified and directed. 57 Material and labour for 18/19mm thick pre laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination with 1st class hard wood 5mm thick teak wood edging all around, fixed with screws to timber framework and leaping treated with french polish suitable for cup board shutters, palmet box, etc.complete all as specified and as directed. 58 Supply and fixing, extruded aluminium alloy handles with plates, fabricated type, anodised 75mm size, ISI marked, complete all as specified and directed . 59 Supply and fixing in repairHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. 25 mm dia with brackets etc complete all as specified and directed . 60 Dismantling water tanks of capacity exc. 250 ltr and not exc. 500 ltrs and removing from site complete all as specified and as directed. 61 Supply and fixing water storage tank 500 ltr capacity HDPE triple layer, confirming to ISstandard, fixed andhoisted in position on staging or roof complete with locking arrangement including provn of over flow pipe, air lock pipe, brass valve high pressure with polythene float and flynut , ISI marked, screwed and suitable for iron pipe 20 mm bore, complete all as specified and directed 62 Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed . 63 Supply and fixing of 15mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed. 64 Refixingsteel water tubing of 15 mm bore in new or old position withall new fittings as required, laids in floor , wall and on ceiling, complete all as specifiedand directed. 65 Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed . 66 Supply and fixing of 20mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed. 67 Refixingsteel water tubing of 20 mm bore in new or old position withall new fittings as required, laids in floor , wall and on ceiling, complete all as specifiedand directed. 68 Taking down shutters of any description but not exceeding 1.00 Sq.m eachfrom chowkhat and removing from site complete all as specified. 69 Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each, from chowkhat and removing from site complete all as specified. 70 Material and Labour for plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops,lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair andeven, including necessary form work complete all as specified and directed. Note- If reinforced concrete, reinforcement shall be measured and paid for separately. 71 Supplyand fixing factory made flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified. 72 Supply and fixing 35 mm thick, 2nd class hard wood, partly or fully glazed and skelton shutter open rebatedand prepared to receive glass ,gauge etcdivided into squares with plain, chamfered or rounded, mitred beads, rebated sash bars any numbers for securing glass, etc or partly with panels of 9mm BWP commercial ply etc with size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a) or to match with existing shutters etc complete all as specified and as directed. 73 Suppling and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification complete all as specified and as directed. 74 Suppling and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing in the frame as per specification complete all as specified and as directed. 75 Taking down existing earthing continuity conductor, aluminium strip 25X3.15 mm ,and removing to store for keeping safe custody for refixing and makinggood to surface complete all as specified anddirected . 76 Taking down existingAir termination single pointed aluminuim Rod 12 mm dia 300 mm longremoving to store for keeping safe custody for refixing and refixing the same after completion of civil work complete all as specified anddirected . 77 Refixing of earthing continuity conductor aluminium strip 25 X 3.15 mm with saddles and screw, etc.drawn through conduit in trenches / under floor /on wall or on roof including insulator complete all as specified anddirected . 78 Supply andfixing mild steel butt hinge of 100mm length, cold rolled, medium weight, ISI marked complete all as specified and directed. 79 Supply and fixing mild steel, semi-barrel tower bolt 200 mm , open cover, with sheet pressed barrel, stove enamelled black with bright bolt complete all as specified and as directed. 80 Material and labour for preparing new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified anddirected . 81 Material and labour for preparation of old surface of wood and wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified anddirected . . 82 Material and labour for preparation of old steel surface of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge. 83 Dismantling of cast iron or reinforced concrete drain pipes of any size, jointed in cement mortar and taking out of trenches or from any position, complete all as specified and as directed. 84 Supply and fixing in repair, cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints, laid in trenches or in floors complete, all as specified and directed. 85 Supply and fixing in repair, cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints, fixed to wallcomplete, all as specified and directed. 86 Supply and fixing in repair, cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints, laid in trenches or in floors complete, all as specified and directed. 87 Supply and fixing in repair, cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints, fixed to wallcomplete, all as specified and directed. 88 Supply and fixing cast iron branch pieces, 100 mm dia, single (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches complete, all as specified and directed. 89 Supply and fixing cast iron bends (any radius) 100 mm dia diminishing pieces or tapers complete, all as specified and directed. 90 Supply and fixing cast iron bends (any radius) 75mm dia diminishing pieces or tapers complete, all as specified and directed. 91 Supply and fixing cast iron branch pieces, 75 mm dia, single (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches complete, all as specified and directed. 92 Supply and fixing vitreous china wash hand basin, white , flat back of size 550mmx400mmfixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling chromium plated and 32 mm dia PVC waste pipe including fixing ofwaste fitting, etc. as in repair complete all as specified and as directed. 93 Supply and fixing in repair,15mm bore pillar tap, chromium plated, cast copper alloy with capstan head, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ complete all as specified and directed. Make--PRIMA Cat No PPL-5309 or equivalent model in makes mentioned in Appendix B of tender document.Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment. 94 Supply and fixing in repair, stop valves, 15 mm dia pipe, chromium plated, fancy type, ISI marked, screwed down, high pressure with capstain head, (concealed type) with sliding flange, screwed both ends for 15mm bore pipes or for unions complete all as specified and directed.Make- PRIMA Cat NoPLF-6210or equivalent model in makes mentioned in Appendix B of tender document.Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment. 95 Supply and fixing in repair, bib tap, long body, screwed down, high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union complete all as specified and directed.Make- PRIMA Cat No PLF-6202 or equivalent model in makes mentioned in Appendix B of tender document.Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment. 96 Taking down bib tap, of any description removing to store for keeping safe custody for refixing and refixing the same complete all as specified anddirected . 97 Supply and fixing PVC connections 45cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified anddirected . 98 Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in hard/dense soil complete, all as specified and as directed. 99 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed. 100 Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed. 101 Demolition of SGSW drain pipe of any bore jointed in cement mortar including PCC bedding/hunching, and taking out of trenches with fittings complete all as specified and as directed. 102 Material and labour for concrete bed to drain pipes of 110mm dia including packing under and hanging against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type-D2 using 40mm graded mechanically crushed stone aggregate , complete all as specifiedand directed . 103 Supply andfixing in repair, for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L type or J type or cranked hook bolt in roof, wall etc. complete all as specified and as directed 104 Supply and fixing in repair 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connections & flush pipes for WC complete all as specified and as directed. 105 Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and making good distrubed surfaces of wall, floors, etc. complete all as specified and directed. 106 Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke and low halogen FRLSH, 1100 volt grade for phase (red) and neutral (black), with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceilingand incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke and low halogen FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of not less1.2 mm thick mild steel sheet metal conforming to IS with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existing for one ligh point controlled by one switch one way switch 6 Amp. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III. Note:- (All chases will be cut by chase cutter only). 107 Description all as per Srl item No.105 here in before but one ceiling fan/ exhaust fan point controlled by one way switch 5 Amp complete all as specified and as directed.. 108 Description all as per Srl item No.105 here in before but one bell point controlled by one bell push button complete all as specified and as directed.. 109 Description all as per Srl item No.105 here in before but one switch socket outlet 3 pin, 5 Amp on same board complete all as specified and as directed. 110 Description all as per Srl item No.105 here in before but one switch socket outlet 3 pin, 5 Amp on the independent board complete all as specified and as directed. 111 Description all as per Srl item No.105 here in before but one light point controlled by two way switch 5 Amp complete all as specified and as directed. 112 Description all as per Srl item No.105 here in before but 2.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed(FRLSH) cable 1100 voltsincuding 2.5 sqmm stranded copper conductor (FRLSH) PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for one 5 pin 16 Amp socket (Power point) on independent board complete all as specified and directed. 113 Description all as per Srl item No.105 here in before but 4.0 sqmm single core multi stranded copper conductor PVC insulated unsheathed(FRLSH) cable 1100 voltsincuding 4.0 sqmm stranded copper conductor (FRLSH) PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for one 5 pin 16 Amp socket (Power point) on independent board complete all as specified and directed. 114 Supply and fixing switch piano 6 Amps, flush type, single pole, one way,230 volt , AC supply,ISI Marked, complete all as specified and directed. 115 Supply and fixing switch piano 16 Amps, flush type, single pole, one way,230 volt , AC supply,ISI Marked, complete all as specified and directed. 116 Supply and fixing switch piano 6 Amps, flush type, single pole, one way,230 volt , AC supply,ISI Marked, complete all as specified and directed. 117 Supply and fixing switch piano 16 Amps, flush type, single pole, one way,230 volt , AC supply,ISI Marked, complete all as specified and directed. 118 Supply and fixingswitch piano, bell push, 6 Amps, flush type, 230V, 50 Hz supply, complete all as specified and directed. 119 Supply and fixing switch piano 6 Amps, flush type, single pole, two way,230 volt , AC supply,ISI Marked, complete all as specified and directed. 120 Supply and fixing PVC power unit modular box (DBOXx) with MCB protected socket with plug top of 25 Amp complete all as specified and directed. 121 Supply and fixingfan regulator electronic step type(Socket type), 120 watt, 230 Volts, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified. 122 Supply and fixing ceiling rose surface bakelite 65x50mm, type 2/3 terminal, isolated body complete all as specified and directed. 123 Supply and fixing for Bell, electric,Ding Dong type, AC, 230 volts, single pole complete all as specified and directed. 124 Supply and fixing lamp holder, PVC/polycarbonate angular type with back plate, complete all as specified and as directed. 125 Supply and fixing in replacement,LED lamp, 5 watt,threaded/pin end, warm/cool lamp type suitable for fixing onbatten/angular holders completeall as specified and directed. 126 Supply and fixingin replacement, LED lamp, 12 watt,threaded/pin end, warm/cool lamp type suitable for fixing onbatten/angular holders completeall as specified and directed. 127 Taking down carefully old unserviceable MCBs DBs any type including MCB SP/SPNand removing to store for keeping safe custody for taking credit and makinggood to surface completeall as specified and directed. 128 Supply and fixing sheet metal enclosures for distribution boardTPN, 4 ways, double door, 415 volts, with and including 200 amps rated bus bar, vertical type, with MCCB as incomer andMCBs as out going, conforms to IS:8623.III, IP:43 protection and making all type of connections with suitable size of gland for incomer LT cable complete , concealed on the wall surface, making good the disturbed portion withadjoining surfaces to match with existing finish complete all as specified and as directed. 129 Supply and fixing factory made sheet metal MCB distribution board, 12 way with 200 Amps rated bus bar, single pole and neutral withdouble door IP-42 fixed on wall duly grouted in wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces complete all as specified and as directed 130 Supply and fixing in replacement, MCCB 125A, 4 pole, 415 volts withbreaking capacity 16 kA and conforms to IEC 60947-2, complete all as specified & directed. 131 Supply and fixingin replacement, MCB,Single Pole and neutral, AC supply, 240 volts, 40-63 Amps,C series,10 kA rupturing capacityand making connections complete all as specified and as directed. 132 Supply and fixing in replacement, MCB,Single Pole, AC supply, 240 volts,06 to 32 Amps,C series,10 kA rupturing capacityand making connections complete all as specified and as directed. 133 Supply and fixing in replacement LED tube light batten fitting 20W (single side connection) including LED rod including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 134 Supply and fixing in replcementLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 135 Supply and fixing in replacementLED surface mounted bulk head luminaries 10 watt with min 800 lumen, industrial model, IP 65, PVC housing, surge protection including driver & LED lamp, etc. complete with all accessories, connecting with copper conductor flexible cablefrom ceiling rose to connector of the light , complete all as specified and as directed. 136 Supply and fixing in replacement LED light fitting 25 W outdoor type for new generation energy saving and environmental friendally long life LED building security light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom opening seperate driver compartment with IP66 protection and impact resistance of IK08 complete all specified and directed.Note : The quoted rateinclude the provn of PVC flexible pipewhere connection wire providedfor light fittings, ceiling fan/ exhaust fan, etc. 137 Disconnecting and taking downceiling fans with blades, exhast fans, metallic body of any make and model andfrom its locations and kept in safe custody and refixing the same in the same location or in other location after completion of complete wiring and civil works including spray painting the steel surface with synthetic enamel paint by spray gun machine complete all as specified and directed.Note : (i) Flexible PVC insulated multistranded copper conductor single core two runs from ceiling rose to fan is inclusive in the quoted rate. 138 Disconnecting of exhast fans (air circulators) PVC body of any make and model and taking down from its locations and kept in safe custody and refixing the same in the same location or in other location, after completion of complete wiring and civil work including cleaning the same before fixing complete all as specified and directed. 139 Disconnecting and taking down of serviceable geysers of any description, capacity and make with its accessories from its locations and kept in safe custody and refixing the same in the same location or in other location, after completion of complete wiring and civil work including cleaning the same before fixing complete all as specified and directed. 140 Supply and fixing in replacement of exhaust fan metallic body 300mm sweep, AC, 230V, single phase, 50 Hz complete all as specified and directed.Make-Standard, model-FSVRASTGRY12 or equivalent make/model mentioned in Appendix B of CA complete all as specified and directed. 141 Supply and fix in replacement of air circulators fan (exhaust fan) PVC body for fresh air having 200mm sweep AC, 230V, single phase, 50 Hz, complete all as specified and directed. Make-Standard, model-FSVRFDXOWH08 or equivalent make/model mentioned in Appendix B of CA complete all as specified and directed. 142 Material and labour for GI bracket, medium grade, 40mm dia, 1.20 m length bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts with two coats of synthetic enamel paint over one coat of red oxide paint complete all as specified and directed. 143 Taking down carefully unserviceable sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including existing PVC/Steel conduit/ casing caping etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed. 144 Material and labour for sub-main wiringwithsingle core PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC concealed conduit of required size not less than 25mm dia with all fittings and accessories alongwith one single core green colour PVC insulated sheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces etc, all as specified and directed. Note :-(i) Cutting/ Chasing of wall/ stair case etc. deemed to be included in the quoted rates of this item. (ii) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.(iii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. 145 Disconnecting of old earthing and replacement with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron earth lead 4mm wire upto test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1,precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel wire mesh and light grade GI wire protection pipe 15mm bore up to main board complete as shown in electrical plate No. 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unserviceable earthing complete all as specified and testing on completion complete all as specified and directed.Note - The units rate includes the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20mm GI pipe (medium grade) for watering 15mm GI pipe for protection of wire (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made. 146 Amount of credit of Rs. 45622.00for retrived old material as mentioned in Schedule A section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
Contract Date: Feb 10, 2026 Contract Value : 21.48 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Himachal Pradesh View Result →
43.
Defence #9519788 AOC
Tender For Special Repair To Bldg No 94, 103 And 282 At Ebs Babugarh And Provn Of 01 X Toilet Block With Washrooms At Hq Troops At E & Amfunder Age B/R-Ii And Age E/M-I Of Ge (North ) Meerut Cantt; 1 Demolition ofbrick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified & directed 2 M&L forbrick work with sub class B, bricksold size, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. 3 M&L for brickwork old sizewith subclass `B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed 4 Demolition of cement concrete of ground floor n exc 15 cm in depthin any position nototherwise specifically provided for complete all as specified & directed 5 Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed 6 M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone agg)25 mm thick for Sub base flooring complete all as specified & directed 7 M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with whiteor colour cemnt to match including 15 mm thscreed ded in cm 1:6 complete all as specified & directed 8 S&Fnon skidcoloured ceramic tiles coloured of7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed inneat cement slurry and pointed with whiteor coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed. 9 S&Fnon skidcoloured ceramic tiles coloured of7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqmas in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. 10 S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4)joint free with grout of matching shadecomplete all as specified & directed 11 Demolition of Stone slabs and tiles of any description or thickness in floors, apronslaid and pointed in any mortor etc complete all as specified & directed 12 M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointedwith grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. 13 M&L for 16-18mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointedwith grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. 14 M&L for machine cut prepolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing uptoGranite finish complete over 15mm thick screed bed in CM 1:6complete all as specified & directed 15 M&L for machine cut prepolished kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing uptoGranite finish complete factory made bull nosed as in riser of steps, skirting/dadolaid over10mm thick in cm 1:4 complete all as specified & directed 16 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed 17 Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified & directed 18 S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed Note:- (i) (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (ii)For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. 19 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directedNote:- (i)M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).(ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. 20 S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretchedto tighten firmly supplied and fitted to chowkats complete all as specified & directed 21 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directedNote: stainless steel butt hinges and necessary S S screws shall be paid separately) 22 S&F powder coated anodised aluminium windows slidingtype (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick plain glass complete all as specified and directed. 23 S&F powder coated anodised aluminium ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) inclstainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick frosted glass complete all as specified and directed. 24 M&L for 18/19mm thick Soild MDF board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to MDF frame work in cup boards, rebated or flat edged fancyhandle , Magnite lock complete all as specified and directed. 25 M&L for framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified & directed 26 M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) over one coat of primer complete all as specified & directed 27 S & F 30 mm flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanisedcomplete all as specified & directed 28 S & F 125mm size aluminium alloy handles cast type anodized complete all as specified & directed. 29 S & F 150mm size aluminium alloy handles cast type anodized complete all as specified & directed. 30 S&F aluminium anodised tower bolts 150mm long, of extruded section complete all as specified & directed. 31 S&F aluminium slidingbolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed 32 S&F heavy weight butt hinges 100mm in sizecomplete all as specified and directed. 33 S&Faluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified & directed 34 S&F 1.00 mm thick mild steel, plain, black sheetin hearths; covering to Manhole cover covering to door chowkats (frames); chullah hoods; water tanks; water troughs: ducts; urinal trought and funnels etc cut to size edges beads, holes punchedincluding round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seanes including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed. 35 S&F mild steel 150mm size helical door springincluding roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed. 36 Taking down of cementplaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed 37 M & Lfor applying 15 mm thick rendering using ready mix plaster bags on brick / concrete surfaces of external walls finished even and smooth as per manufacturer instructions, complete all as specified and directed :Note:- Water proofing compound shall be measured and paid sepratly 38 M&L for rendering 5 mm thickon fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed 39 M & Lfor applying 15 mm thick rendering using ready mix plaster bagson brick / concrete surfaces of internal walls finished even and fiar, using water proofing compound 200ml by weight of 50 kg cement bag or as per manufacturer instructions, complete all as specified and directed :Note:- Water proofing compound shall be measured and paid sepratly 40 M&L for 1 coat of prime using roller complete all as specified and directed. 41 M&L for Two coat of OBD and two coat putty using roller for painting complete all as specified and directed 42 M& L for preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified & directed 43 M & Lfor applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm andtwo coat putty using roller for paintingcomplete all as specified & directed 44 Demolition of reinforced concreteof any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified & directed 45 M&L for form work to sides and soffits of beams lintels etc finishedroughcomplete all as specified & directed 46 M & L for RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified & directed 47 M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified & directed 48 Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poiningein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified & directed 49 S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape requiredincluding cranking, bending spirally for hooping for columns, hooking ends and binding with and including MSwire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. 50 As per described Ser item No. 49here-in-before but 6 to 8 mm dia complete all as specified and directed. 51 Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified & directed 52 All as per described Srl Item No.51here-in-before but 20 mm bore pipe complete all as specified & directed. 53 Supplying and laying of 20mm bore galvanized iron tubes medium grade with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed 54 Supplying and laying of 25mm bore galvanized iron tubes medium grade with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed 55 Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified & directed 56 S&Ftriple layerwhite color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and including dismantling water tanks any type & removing complete all as specified & directed 57 S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed 58 S&F in repairs bib taps brass cromium plated 15 mm bore size screwed down screwedfor iron pipe or for brass ferrule complete all as specified & directed 59 S&F in repairsfloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed 60 S&F in repairs15 mm dia stop cock/angle cockcast copper alloy chromium plated screwed downhigh pressure with crutch or butterfly handle, flenchscrewed both ends for iron or for union complete all as specified & directed 61 S&F in repairs of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed. 62 S&F in repairs Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified. 63 S&F in repairs 10 litre capacityPVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed. 64 S&F in repairs ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement. 65 S & F in repairs PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. 66 S&F in repairs chromium plated shower rose 125mm size all as specified and directed 67 S&F in repairs CP soap dish complete all as specified & directed 68 S &Fin repairs CP grating doom 100mm diacomplete all as specified & directed 69 S & Fin repairs 75mm bore PVCPipes single socketed in any length with rubber ring joints, fixed to walls and floor etc.as in wasteand S&F powder coated aluminium frame and stainless steel ring to hold 110/75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified & directed 70 S & F in repairs 110mm borePVCPipes single socketed in any length with rubber ring joints, fixed to walls and floor etc.as in waste and rain water pipes and S&F powder coated aluminium frame and stainless steel ring to hold 110/75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified & directed 71 S & FPVC bends 75mm bore, any radius complete all as specified & directed. 72 S & FPVC bends 110 mm bore, any radius complete all as specified & directed. 73 S&F110mm PVC (SWR) vent cowl complete all as specified & directed 74 S&F 110 PVC (SWR) junction single, (Single T) equal or unequal all as specified 75 S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.complete all as specified & directed 76 S&F in repairsGun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia complete all as specified & directed 77 S&Fin repairs factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed 78 S&F in repairs 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered Hot or Cold ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed complete all as specified & directed 79 S&Fin repairs 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. 80 S& F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed 81 S&Fin repairs fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. 82 S&F in repairs chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed. 83 S & F in repairs waste pipe any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed 84 S & Fin repairs 25mm dia Stainless steeldecorated curtain rod with braket and ring complete all as specified and directed. 85 S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming toFe 29W(Gde-E-165) complete all as specified & directed 86 M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings CM 1:4 complete all as specified & directed 87 Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed. 88 M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wallcomplete all as specified & directedNote:-WPC will be measured and paid seperately as supply only rate). 89 Supply only liquid water proofing compound complete all as specified & directed 90 M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)land on primed surface conforming to IS-3384@ 0.30 ltr/sqm nd one coat of bonding material using blown type bitumen grade 85/25 @1.20kg/sqm by forced application and one coat of aluminium paint complete all as specified & directed 91 M & L for overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor complete all as specified & directed.Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance afterbinding of reinforcement for measurement otherwise no payment will be considered on this account. 92 M&L for pcc 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified & directed. 93 M&L for laying 75mm thick PCC 1:2:4 TYPE B-O (using 12.5mm graded crushed stone aggregate) as in floor to receive topping layer complete all as specified and directed 94 S &F in repairs for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified & directed. 95 Dismantiling timber scantlings 40 sqcm and overin cross section in any position framed/unframed work and posts similar works complete all as specified and directed 96 Dismantiling timber scantlings under 40 sqcmin fillets rails ,posts ,rafters, purlins etccomplete all as specified and directed 97 S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, MS pipes or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed. 98 Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed. 99 S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturers instructions and height of buildings upto 12mtr with out stair case all as specified and directed. 100 Supplied and fixed pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturers instructions and height of buildings upto 12mtr with out stair case all as specified and directed. 101 Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets.complete all as specified and directed. 102 S&F GI snap grid frame work for false ceiling of size of grid 605x605mm all as specified and Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to steel frame work complete all as specified and directed. 103 S&F fiber cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminum frame work with screws/clips complete all as per manufactures instructions and as complete all as specified and directed. 104 M&L for 15mm thick rendering on Brick masonary wall surfaces in CM 1:4 mixed with water proofing compound finised even and smooth with using extra cement complete all as specified & directed. 105 M&Lfor 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 150mm including demolition, removal from site upto 3.0 Km as directed by engineer in charge and breaking up drain pipe ( salt glazed stone ware) complete all as specified and directed. 106 M & L for PCC ( 1 : 4 : 8 ) Type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified & directed. 107 M & L for concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified & directed. 108 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement (forming channel shall be measured and paid for separately complete all as specified & directed. 109 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm pipe complete all as specified & directed. 110 M& L for preparing plastered new surfaces of wall and applying three coats of white wash on wall surface complete all as specified & directed. 111 M&L for 75 mm thick cement concrete 1:4:8 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified & directed. 112 M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. 113 Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground in concrete complete all as specified & directed. 114 Dismantling fencing wire mesh, anytypecomplete all as specified & directed. 115 S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0GDE Fe 165 complete all as specified & directed. 116 Supply only Chain link mild steel galvanized fencing made up into mattress or cages etc complete all as specified and directed. 117 Fixing only chain link fencing any mesh, size and type to any type of standard, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. 118 S&F mild steel bolts.Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end tobefittedwith washers and one hexagonalor squarenut.exc 30cm longand n .exc12mm dia complete all as specified and directed. 119 Supply only Mild steel bars 10mm dia round bar complete all as specified and directed. 120 M&L for preparation of new or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 121 M & L for cement concrete 1:3:6 type C2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified & directed. 122 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm 123 Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. 124 Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loosesoil complete all as specified & directed. 125 M&L for TMT bars 5mm dia & over upto 10mm dia in stirrups spacers & binders etc all complete all as specified and directed. 126 M&L for RCC M-25(20mm graded aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified & directed. 127 M&L RCC M-25(20mm graded aggregate) for columns, pillars, pierrs, posts & struts etc complete all as specified & directed. 128 M&L for RCC M-25(20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed. 129 M&L for RCC M-25(20mm graded aggregate)for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc complete all as specified & directed. 130 M&L for flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter complete all as specified & directed. 131 M&L for form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape complete all as specified & directed. 132 M&L for flat form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified & directed. 133 M&L for Flat fair finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etccomplete all as specified & directed. 134 M & L for brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. 135 M&L for broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surfaceetc complete all as specified & directed. 136 M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finsihed even and smooth without using extra cement complete all as specified & directed. 137 M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6, surface finsihed even and smooth without using extra cementcomplete all as specified & directed. 138 M&L for rendering 10mm thick in CM 1:4 on ceiling surface, surface finsihed even and smooth without using extra cementcomplete all as specified & directed. 139 M&L for applying two coats cement base paint on wall including preparing new plastered surfacecomplete all as specified & directed. 140 M&L preparation of new ceiling surface and applying three coat of white washall as specified & all as directed 141 M&L for preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over a coat of approved wall care putty as complete all as specified & directed. 142 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification complete all as specified & directed. 143 S&F Factory made solid panel pvc doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement complete all as specified & directed. 144 S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staplecomplete all as specified & directed. 145 S&F 3.00mm thick sheet figured glass, pin head type and glazing with oil putty in squares n exc. 0.5 sqm in each pane complete all as specified & directed. 146 Preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide over 10cm width or girthcomplete all as specified & directed. 147 S&F steel ventilator with to hung shutter incl hinges steel peg stay completeall as specified & all as directed 148 S&FSS chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flangesall as specified & all as directed 149 S&F 600 x 450 mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified & directed. 150 S&F bib taps cast copper alloy 15mm size, crutch or butterfly handle, screwed down, screwe for iron pipe chromium platedcomplete all as specified & directed. 151 S&F tubes, medium grade, 20mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors complete all as specified & directed. 152 S&F tubes, medium grade, 25mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors complete all as specified & directed. 153 Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poiningein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified & directed. 154 S&F brass chromium plated angle valve 15mm size complete all as specified & directed. 155 S&F 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle complete all as specified & directed. 156 S & F Vitreous China bowl urinal half stall flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe and spreader (excluding flushing cistern, flush pipe and waste pipe) complete all as specified & directed. 157 S&Fvitreous china ware EWC combined pattern complete with internal fittings complete all as specified & directed. 158 S&F, CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe Cat Part No.CERA F8030301 or equivalent in Parryware / Hindware complete all as specified & directed. 159 S&F of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed. 160 S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed. 161 S&F PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls complete including faixing clamps complete all as specified & directed. 162 S&F PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed. 163 S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete including faixing clamps complete all as specified & directed. 164 S&F PVC(SWR) junction single, (Single T) equal or unequal provided with access door110mm bore complete all as specified & directed. 165 S&F PVC(SWR) junction single, (Single T) equal or unequal provided with access door75mm bore complete all as specified & directed. 166 S&F PVC(SWR) bends 110mm bore any radius complete all as specified & directed. 167 S&F PVC(SWR) bends 75mm bore any radius complete all as specified & directed. 168 S&F PVC connections 15mm size, 450mm long with PTMT nuts complete all as specified & directed. 169 S&F, vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified & directed. 170 S&F PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified & directed. 171 S&F chromium plated shower rose 125mm size complete all as specified & directed. 172 S&F CP soap dish complete all as specified & directed. 173 S &FCP grating doom 100mm diacomplete all as specified & directed. 174 S&F for Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified & directed. 175 S&F for Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia complete all as specified & directed. 176 S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed. 177 S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered Hot or Cold ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed complete all as specified & directed. 178 S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. 179 S&Ffancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. 180 S&Fwaste pipe any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed 181 M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified & directed. 182 M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified & directed. 183 Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm in soft/loose soil complete all as specified & directed. 184 Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed. 185 M&L for 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed complete all as specified & directed. 186 M & L for concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified & directed. 187 M & L for precast RCC 1:2:4 type B-1(using 20mm graded stone aggregate)for manhole cover including placing and set in CM 1:6 complete all as specified & directed. 188 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement forming channel shall be measured and paid for separately complete all as specified & directed. 189 M& L for preparing plastered new surfaces of wall and applying three coats of white wash on wall surface complete all as specified & directed. 190 S&F 25 users LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete forcomplete all as specified and directed. 191 Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made ofBrick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size dia 2.4mtr X 4.5 mtr deep etc complete all as specified & directed. 192 M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. 193 M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as infloors, coping, bed block, kneels, apex stones etcincluding weathering slightly rounded or chamfered including form work complete all as specified and directed. 194 Taking down carefully any type of battens or conduit point wiringwith conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed. 195 M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulatedcopper conductor cable, sheathed and connected to common earth and earth dolly in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,suitable for modular fixtures including suitable modular box, base plateand outer plate including making good to walls, ceiling etc including white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. 196 All as described srl item no 195 here-in-before but One light/fan/exhaust fan/bell/buzzer point controlled by one, one way 6 Amps switch/bell push button, complete all as specified and directed. 197 All as described srl item no 195 here-in-before but One 3 pin 5/6 amps socket outlet point on Same board, controlled by one, one way 5/6 amp switch complete all as specified & directed. 198 All as described srl item no 195 here-in-before but One 3 pin 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 amp switch complete all as specified & directed. 199 M&L for concealed point wiring with 2.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulatedcopper conductor cable, sheathed and connected to common earth and earth dolly in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,suitable for modular fixtures including suitable modular box, base plateand outer plate including making good to walls, ceiling etc including white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. 200 All as described srl item no 199 here-in-before butOne 3 pin socket outlet, 16 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way 15 amp switch complete all as specified & directed. 201 M&L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable, drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing & including taking down old unservicable submain complete all as specified & directed. Note:-One meter of conduit along with 2x6 sq mm wire and one 6 sq mm earth shall be measured as one unit length complete all as specified & directed. 202 S&F Modular Switch, 1 Module, 6A, AC, 240V, one way complete all as specified & directed. 203 S&F Modular Socket, 2 Module, 6A, 2/3 pin combined, AC, 240V, one way complete all as specified & directed. 204 S&F Modular Switch, 1 Module, 16A, AC, 240V, one way complete all as specified & directed. 205 S&F Modular Socket, 2 Module, 6A / 16A, 2/3 pin combined, AC, 240V, one way complete all as specified & directed. 206 S&F ceiling rose, surface type, bakelite,65 x 25 mm, three terminal complete all as specified and directed. 207 S&F Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 08 protection, with provision of 125 Amps, 36 kA MCCB. Make- Legrand/Schneider/ABB/IndoAsian with the inbuilt provison forfixing of 1 No MCCB and 12 Nos MCBS inside of DB, with metal door and flush to wall including grouting and cutting in existingwall and making good disturbed surfacewith two coats of white / colour washing / distempering etc to match the existing one complete all as specified & directed. 208 S&FMCCB 4 pole,125 Amps 36 KA complete all as specified & directed. 209 S&F MCB, SP, AC, 240 volts B series capacity of 40 Amps, 10kA and making connections complete all as specified & directed. 210 S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified & directed. 211 S&F MCB, SP, AC, 240 volts B series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. 212 S&F in repairs Isolator DP, 63 A, AC, 240V, complete all as specified & directed. 213 S&Flamp holder (Angular / Straight), insulated body, with back plate complete all as specified & directed. 214 S&F Led lamp 9/10 watt complete all as specified & directed. 215 S&FLED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed. 216 S&F exhaust fan AC single phase 230/240,metallic body of size 250mm sweep with louver complete all as specified and directed. 217 S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed. 218 S&F in repairs Modular Step Fan Regulator, 2 Module, 120W, AC, 240V, one way complete all as specified & directed. 219 Supplying, laying or fixing, jointing and testing LT under ground electric power cableCrossed linked polyethylene ( XLPE Cable)insulated, galvanised steel strip or wire armoured,ISI-7098 marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of50 sqmm 3.5 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc, Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,clamps, nuts , bolts, washers andpipe shall be measured and paid separately under appropriate itemscomplete all as specified & directed. 220 Supplying, laying or fixing, jointing and testing LT under ground electric power cableCrossed linked polyethylene ( XLPE Cable)insulated, galvanised steel strip or wire armoured,ISI-7098 marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of16 sqmm 2 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc,Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,clamps, nuts , bolts, washers andpipe shall be measured and paid separately under appropriate items complete all as specified & directed. 221 M & L for Sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable complete all as specified & directed.Note :- Punned thickness only will be considered for payment. 222 M & L for bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other complete all as specified and directed. 223 S&F fan ceiling complete with blades, down rods, electronic regulator and accessories ,230V, 1200 mm sweep.BEE Five Star rated with Brushless direct current motor (BLDC) complete all as specified & directed. 224 S&F electric water heater, storage type steel body complete with inner tank and heating element upto 2 kW capacity, 25 litres, BEE 5 star rated, complete with all accessories such as safety valve, thermostat , NRV, connection piece, etc. complete all as specified & directed. 225 Supplying, installing, commissioning and testing of LT switchgear panel board ( Kiosk) of size not less than 600mmx600mmx500mm,IP-55 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) ,400 Amps coloured horizontal tinned Aluminium bus bars , factory made out of 3.15mm thick MS sheetstructure mounted onrigid mild steel angle iron frame of 50mmx50mmx6mm with 400mm long extended legs grouting in PCC 1:2:4 type B1 of size 150mmx150mmx250mm , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front double doorand back openable doors with proper locking arrangements for dust and vermin proof ,complete including adjustable thermal and fixed magnetic release MCCB 4 pole, 200 Amps, 415V,36 KA,50 hz-01 No (incoming),suitable size cable allay,lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cablecomplete all as specified & directed. 226 M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified and directed. 227 M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVCinsulated, unsheathed copper conductor, FR cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following:- 228 All as described srl item no 227 here-in-before but One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps complete all as specified & directed. 229 All as described srl itemnno 227 here-in-before but One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch complete all as specified & directed. 230 S & F Switch piano flush button single pole one way 5 amp complete all as specified and directed. 231 S & F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed. 232 S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed. 233 S & F lamp holder insulated body with back plate fix done anodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick backlite cover complete all as specified and directed. 234 M&L for Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed. 235 S&F Exhaust fan steel bodyAC single phase 230/240V size 300 mm sweep with blades, and louvers including hole and plastering complete all as specified and directed.. 236 S&F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified & directed. 237 S&F MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified & directed. 238 S&F MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB C series complete all as specified and as directed. 239 M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wite 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifiied or indicated including testing on complete all as specified & directed. 240 Supply ,laying commissioning ,testing of XLPE under ground LT cable 1100 volts grade of size 6 sqmm 2 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench ,fixing on wall ,under road crossing through proctection pipe etc including taking down old LT UG cable complete all as specified and directed. 241 Bore Cutting the existing road for cable crossing upto 6 mtr long from one side to other side complete all as specified & directed. 242 M & L for GI pipe in replacement ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including suitable size clamps complete of size 40mm bore,complete all as specified & directed. 243 Cutting the existing DI/CI/GI water supply pipe line upto 150mm dia and inserting clamp and all fitting complete all as specified & directed. 244 Bore Cutting the existing road for GI pipe crossing upto 6 mtr long from one side to other side complete all as specified & directed. 245 M&L for 25 mm bore , galvanised iron water tubing , medium grade (ISI marked) with all fittings such as bends, elbows, tees, connector , back nuts, diminishing pieces ,unions, short pieces, caps and plugs etclaid in trenches complete all as specified and directed. 246 S&F Gun metal gloveor gate valves,with iron wheel head,screwed both ends for iron pipe of size 25 mm dai pipe complete all as specified and directed. 247 Excavation in trenches in soft and lose soil n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of GI/CI pipe line & getting out including forming bottom surface complete all as specified & directed. 248 Returning filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick in any type soil complete all as specifiedand directed. 249 Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specifiedand directed.
Contract Date: Feb 09, 2026 Contract Value : 39.40 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Uttar Pradesh View Result →
44.
Defence #9484724 AOC
PROVN OF TOILET BLOCK AT EXAM HALL (VTF), PROVN OF MODULAR LABORATORY WORK STATION WHITE MARBLE TOP WITH WOODEN CABINETS AT BLDG NO E-45 (VTF), PROVN OF 01 X TOILET BLOCK WITH WASHROOMS AT EQTN TRG E&AMF AND PROVN OF 01 X TOILET BLOCK WITH WASHROOMS BEHIND SHOW OFFICE AT E&AMF AT RVC C&C MEERUT UNDER GE (NORTH) MEERUT CANTT; 1 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth & getting out in soft/loose soil complete all as specified and directed. 2 M&L for cement concrete PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) as in foundations, fillings and Mass concrete complete all as specified and directed. 3 M&L for RCC (Design mix) M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 4 M&L for RCC (Design mix) M-25 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 5 M&L for RCC(Design mix) M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. 6 M&L for RCC(Design mix) M-25 (using 20mm graded stone aggregate) as in roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. 7 M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 8 M&L for 75mm thick, PCC 1:3:6 type C-2(using 40 mm graded crushed stone aggregate) as in sub base of floorscomplete all as specified and directed. 9 Formwork for rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work; vertical or to batter complete all as specified and directed. 10 Formwork for rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. 11 Formwork for rough finished surfaces to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc also splays between floors and beams, etc. complete all as specified and directed. 12 Formwork for rough finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work complete all as specified and directed. 13 Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 10mm dia and over, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. 14 Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. 15 M&L brick work with fly ash old size bricks, straight or curved on plan exceeding6 cm mean radius built in cement mortar 1:6 complete all as specified and as directed. 16 M&L for Rendering 15mm thick in CM 1:6 on brick / concrete surfacesfinished even and smooth without using extra cement complete all as specified and directed. 17 M&L for rendering 15 mm thick on brick or concrete other than fair surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. 18 M&L for rendering 5mm thick on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed. 19 M&L for preparation of newly plastered surfaces and applying two coat of distemper oil emulsion white tinted over a coat of alkali resistant primer complete all as specified and directed. 20 M&L preparation of newly plaster surface and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed. 21 M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4,mixed with liquidwater proofing compound @ 200ml per 50kg cement, surface finsihed even and smooth without using extra cement complete all as specified and directed.Note :- WPC shall be measured and paid separately. 22 Supply only integral water proofing compound only complete all as specified and directed. 23 M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning the surfacescomplete all as specified and directed . 24 M&L for APP based polymeric membrane minimum weighing 3.50kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)laid on primed surface by forced application complete all as specified and directed. 25 M&L for Applying two coat of bituminous aluminium paint @ 0.20 Ltr/Sqm complete all as specified and directed. 26 S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.38Sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over & including 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed. 27 S&F coloured Glazed ceramic tiles in vertical surfaces (300x600x7mm thick) set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces over 10 mm thick swreed bed in CM 1:4 complete all as specified and directed. 28 M&L 75 mm thick PCC in plinth protection and paving 1:3:6 type C-1, (using 20mm gradded stone aggregate) finishing cement concrete evenand smooth in slope without using extra cement complete all as specified and directed. 29 M & L Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing exc 0.55 kg/ m including necessary cutting, joining cleats, glazing clips, ruber neoprene packing, 200mm long fancy handles 2 Nos in each door, heavy SS hinges-3 Nos, anodised aluminum snap beading screws, 200mm long tower bolt-2 Nos etc. and provision of mortic lock complete all as specified and directed. 30 S&F anodised powder coated aluminium window and ventilater shutters fixed/openable type with out sash bar of aluminium section weighing 0.55 kg/m including necessary joining cleat , glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed 31 S&F 4.8mm thick sheet glass, ordinary quality and glazing withbeading in square exc 0.5 sqm in each pane complete all as specified and directed. 32 S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thickaluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. 33 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 34 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. 35 S&F butt hinges 100mm long stainless steel complete all as specified and directed. 36 S&F 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. 37 S&F 15mm bore brass WHB CP mixer chromium plated fancy typefor mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 38 S&F CP angle valve 15mm bore cast copper alloy fency type, chromium plated with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 39 S&F CP bib tap long body 15mm bore cast fency type chromium plated copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 40 S&F 15mm bore medium grade GI tubes with all fittings and fixed complete to walls or laid in floor complete all as specified and directed. 41 S&F 20mm bore medium grade GI tubes with all fittings and fixed complete to walls or laid in floor complete all as specified and directed. 42 S&F Vitreous china wash hand basin (Oval shape) white including, waste coupling and waste pipe complete all as specified and directed. 43 S&F vitreous china wash down water closet pan (pedestal pattern), (excluding flushing cistern and flush pipe) including seat and cover and connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. 44 S&F PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed. 45 S&F PVC connection fibre reinforced 600mm long with brass check nuts and PVC washers at both ends complete all as specified and directed. 46 S&FPVC connection 15 mm size with PTMT nuts of length 600mmcomplete all as specified and directed. 47 S&F CP grating (with and without hole) of size 125mm complete all as specified and directed. 48 S&F CP Health faucets for EWC complete all as specified and directed. 49 S&F CP brass soap dish complete all as specified and directed. 50 S&F CP brass toilet paper holder complete all as specified and directed. 51 S&F single towel rail 600 mm long CP brass complete all as specified and directed. 52 S&F towel ring CP brass complete all as specified and directed. 53 S&Fwall mountedrectangular looking mirror 5MM thick of size 1000 mm x 600mm with double coat protection and longetivity, grounded edges for safety and silver plating on back side for better reflection and fixed to wooden plugs with chromium plated brass screws and cup screws complete all as specified and directed. 54 S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. 55 S&F Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including ball PTMT valve 20 mm bore, high pressure with polythene ball & float and inlet/outlet wasout pipe complete all as specified and directed. 56 S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 57 S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. 58 S&F 110mm bore PVC (SWR) vent cowland fixed, complete all as specified and directed. 59 M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 60 S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls/floor including clamps complete all as specified and directed. 61 M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and on plateform slab like vertical surfaces in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite including 10 mm thick rendering in CM 1:4 for receiving Granite work complete all as specified and directed. 62 S&Fvitreous china urinal half stall olymous star white including 32mm pvc waste pipe complete all as specified and directed. 63 Taking down wooden chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed. 64 Taking down steel window, ventilators of any description with all fittings of any size and shape complete all as specified and directed. 65 S&F 6mm thick ACP sheet interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work complete all as specified and directed. 66 S&F powder coated(minimum thickness of powder coating 50 micron) aluminium window, ventilator frame with shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including 04 mm thick glass, SS wire mesh necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no. in each shutter) tower bolt (2no. in each shutter) complete all as specified. Note : Providing Cooler opening with shutter where required and directed by Engr-in-charge. 67 S&F powder coated(minimum thickness of powder coating 50 micron) aluminium grill minimum thickness 6mmof approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approvedaluminium standard U-section around the opening, all complete as per requirement. Note : Providing Cooler opening & U-clip at end where required and directed by Engr-in-charge. 68 S&F 18/19mm thick Medium density fibre board having density between 700-800 kg/m3 , both side laminated exterior grade, fixed as in framework for cupboard and cupboard shutters including beading/side liping fancy type fixed with screws complete all as specified and directed 69 S&F 12mm thick Medium density fibre board having density between 700-800 kg/m3 , both side laminated exterior grade, fixed as in framework for cupboard and cupboard shutters including beading/side liping fancy type fixed with screws complete all as specified and directed 70 S&F Stainless steel heavy duty telescopic slider/drawer channel silver colour of length 400-600mm including screw, nuts and other necessary items complete all as specified and directed. 71 S&F self closing stainless steel hinges as used in cabinets complete all as specified and directed. 72 S&F 100mm long stainless steel barrel tower bolts fancy type of extruded section and fixed complete all as specified and directed. 73 S&F 100mm size stainless steel fancy type stylis handles complete all as specified and directed. 74 M/L for factory made 50 micron powder coated aluminiumthree way track sliding windows of frame size 92mm x 31.75mmx 1.5mm thickness and of shutter size 40mmx 18 ( with 9.00mm interlocking legs) x 1.45mm thick( two shutter glazed, covering half of span of opening each and one shutter skelton covering half of span of opening) incl provn for making windows air tight, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45mm normal dia of wire and average width of aperature 1.4mm and fixed with steel wire staples and 5mm thick plain glass including necessary fitting and fixtures/ aluminium snap beading complete all as specified Note:- (a) measurement shall be taken for clear opening ie. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be include in the above rates and no extra shall be paid. 75 M&L brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. Note: considered height upto 12m from FFL of Ground Floor. 76 Complete removal of existing treatment of wall,ceiling fins, chajja etc by scrapping with electric machine having vacuum machanism RPM not less than 1500, sanding pad of 80 grit of dia 7/9 to make surface free from smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots and removing debris/ malba to low line area out side MoD landcomplete all as specified and directed. 77 M&L for applying 2mm thick wall care putty making smooth surface complete all as specified and directed. 78 M&L for applying two coat of oil bound distemper incl one coat primer by using with fully automatic airless spray technology max pressure 3300 PSI with single spray gun on walls including preparation of old wall surfaces complete all as specified and as directed. 79 M&L for applying two coat of oil bound distemper incl one coat primer by using with fully automatic airless spray technology max pressure 3300 PSI with single spray gun in ceiling including preparation of ceiling surfaces complete all as specified and as directed. 80 Demolition of tiles including bedding/screed/backing plaster of any description, multiple layers or thickness in floors, walls, aprons etc laid, bedded or pointed in cement mortor complete all as specified and directed. 81 M&L forvitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm in floors etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 including pointing in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed. 82 All as per item Srl item No23here-in-before but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as specified and directed. 83 M&L forvitrified ceramic tiles dark shade double charged 10 mm thick (square/rectangular) area of eac including cutting of proper shape & sizetiles exceeding 0.36 sqm but not exc 0.42 sqm in floors as highlighter etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 including pointing in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed. 84 Dismantling wall boards(fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets any thickness, including cover fillets complete all as specified and directed. 85 S&F 5mm thick Prelam colour solid PVC wall panel/louvers sheet incl strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions including 32x5mm thick fillet, Solvent Cement and fixing at site including screw, nails complete all as specified and directed. 86 S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including hangers ofG.I. (upto 1200mm length) fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as per manufactures instructions and as directed. 87 S&F Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including sqr/rectangular/circular shape cutting for fixing of ceiling lights complete all as specified and directed. Note:-Frame work for ceiling shall be measured and paid separately. 88 Providing, cement concrete 1:2:4, type B1 (20mm graded stone agg) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. 89 S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0mm-210gms) complete all as specified and directed. 90 S&F 20 mm/15 mm tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm[1]45gms ) complete all as specified and directed. 91 S&F 15 mm PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 92 S&F 32 mm dia solid waste pipe for wash basin/ sink/ urinal etc complete all as specified and directed. 93 S&F laboratory sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 460mm x 400mm x 200mm complete all as specified and directed. 94 S&F fancy type double layer sliding roller blind of high quality fabric including all necessary fittings/fixture as approved by GE/user at site complete all as specified and directed. 95 S&F Harrison rails, stainless steel, chromium plated with fixing brackets, stops, rollers including finial at end etc. complete all as specified and directed. 96 M&L for 18mm thick Nano-Granite in pure white colour (of any type) work (table rubbed and polished) for table top surfaces (double layer where required) fixed in 15mm cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 97 S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. 98 S&F 75mm PVC (SWR) bends any radius complete all as specified and directed. 99 Providing edge moulding half/fullto 18-20mm thick Granite stone any description stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. 100 Cutting holes in half/full brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed. 101 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth & getting out in soft soil complete all as specified and directed. 102 M&L for cement concrete PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) as in foundations, fillings and Mass concrete complete all as specified and directed. 103 S&F 25 users LLDPE septic tank designed to carry sewage and suldge water, excavation in any type of soil, PCC 1:4:8 below foundatioin, vent shaft, connection etc complete for all as specified and directed. 104 S&F 30 users LLDPE septic tank designed to carry sewage and suldge water, excavation in any type of soil, PCC 1:4:8 below foundatioin, vent shaft, connection etc complete for all as specified and directed. 105 M&L for Precast RCC 1:2:4, Type B–1 (using 20mm graded stone aggregate) as in landings, cover slabs [for manholes etc], chullah hoods, Chajjas, water troughs, mangers, Shelves and similar articles with plain faces including formwork, set in cement mortar 1:4 complete all as specified and as directed. 106 Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 10mm dia and over, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. 107 M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. 108 M&L for Rendering 15mm thick in CM 1:4 on brick / concrete fair faces finished even and smooth without using extra cement complete all as specified and directed. 109 Supply only integral water proofing compound only complete all as specified and directed. 110 M&L for PE, DWC (double wall corrugated) pipe confirming to IS 16098 Part-2 2013 pertaining structure wall plastics pining system for sewage 150 mm bore and above bore pipe SN-8 and all necessary fittings and fixturescomplete all as specified and directed. 111 M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping /bed blocks incl. weathering rounded or chamfered angles and throating incl. necessary form work req. complete all as specified and directed. 112 Extra for forming fair finishing drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds mitred/stopped ends etc complete all as specified and directed. 113 Demolition of reinforced concreteof any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed. 114 M&L for providing PCC 1:2:4 type B-0 (using 12.50mm garded crushed stone aggregate) as in benching, surface channel of drain complete all as specified and directed. 115 Construction of Soakage well of size 2.4m x 4.50m effective depth including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed. (Ref TD Drg No TD/309 Sheet 1/4 to 4/4 of HQ CE BZ). 116 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and directed.[Note : A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming). 117 Preparing new Plastered or unplastered surfaces of ceiling and applying three coat of white wash completed complete all as specified and directed. 118 Removal of excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. 119 Providing, cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. 120 M&L for 8-10mm thick heavy duty outdoor matte finished ceramic tiles in any colour, size & design etc for parking, footpath, pedestrian etc and similar location, of size 300x300, jointed and pointed in neat cement slurry complete all as specified and directed. 121 M&L for 20 mm thick screed bed or bedding layed for tiling work (parking tile, foothpath tile, chequered tile etc) in cement mortar 1:6 complete all as specified and directed. 122 M&L cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) of 75 mm thick in floors complete all as specified and directed. 123 Taking down copper/Aluminium point wiring (light, fan, socket or power) complete,including fixtures and fittings such as switches, ceiling rose, pendent, regulators sockets, light fittiings, etc. removing materials to store forkeeping in safe custody or for taking creditand making good the disturbed surafces on wall/floors etc. 124 M/L for point Wiring with PVC insulated multistranded copper conductor cable ,1100 Volt grade FRLS of size 1.5sqmm drawn in and including PVC Rigid conduit of size not less than 20mm dia with acessories (concealed) with modular metal flush box of adequate size with 3mm thick modular white plastic plate with frame (same make of switch and socket) includingh continuous 1.5 sqmm copper conductor (multistranded) PVC insulated and unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified conforming to IS-694.Work including plastering after providing sunk boxes and colour/white wash/Distemper with matching colour as per original specification. 125 One tube light/Bulb/ Bldg security light/fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. 126 one 3 pin 5 Amp switch sockets out let point on independent board complete all as specified and directed. 127 one 3 pin 5 Amps switch sockets out let on the same board complete all as specified and directed. 128 All as per serial item No 124.01 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed. 129 All as per item No 124.01 abovebut 4 sqmm FRLScable for wiring and 4 sqmm cable as earth conductor for one 15 amps switch socket out let independent board complete all as specified and directed. 130 S&F switch 6/10 A One way SP modular type complete all as specified and directed. 131 S&F Moduler socket shuttered 6A, 5 Pincombined 2 module controlled by one switch complete all as specified and directed. 132 S&F Switch 16 A one way SP modular type complete all as specified and directed. 133 S&F Moduler socket shuttered 6/16 A6 Pincombined 3 module controlled by one switch complete all as specified and directed. 134 S&F electronic stepped typemoduler fan regulator, AC 230 Volt, 120W complete all as specified and directed. 135 Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 136 S&F metal exhaust fan, 450mm sweep with lovers, AC, 230V incl making hole and plastering complete all as specified and directed 137 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 138 Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed. 139 S&F Rigid non-metallic PVC concealed conduit 32mm inclusive of boxes (junction/terminal) all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed. 140 S&F in repairs 1 module SPN metallic enclosure with a two pin and earth plug and socket with one MCB SP 20 Amps complete all as specified and directed. 141 M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVCinsulated, unsheathed copper conductor, FRLS cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all concealed conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following:- 142 One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps complete all as specified and directed. 143 One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch complete all as specified and directed. 144 One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed. 145 All as per serial item No 136.01 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed. 146 S & F Switch piano flush button single pole one way 5 amp complete all as specified and directed. 147 S & F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed. 148 Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed 149 Supply and fix inswitch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge 150 S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed. 151 Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed. 152 Supply and fixing LED lamp 2 pin 9/10 watt. complete all as specified and directed. 153 Supply & fixingLED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed. 154 M&L for Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed. 155 S&F Exhaust fan steel bodyAC single phase 230/240V size 300 mm sweep with blades, and louvers including hole and plastering complete all as specified and directed. 156 Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. 157 Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and directed. 158 Supply and fix MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB C series complete all as specified and as directed. 159 M/L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wite 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifiied or indicated including testing on completion complete all as specified and directed. 160 Supply only ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CMM with min service value 6 BEE 5 star rating,with brushless direct current motor (BLDC) complete all as specified and directed. 161 Supply and install Ceiling mounted cassette type 2Ton Hot and cold AC units indoor/outdoor, rotary compressor, single phase units 220V - 240V, 50 Hz complete with cordless remote control, copper pipes indoor unit to outdoor unit , outdoor unit stand &Iron full threaded Tie rods, nut bolts for fixing of indoor Ac unitcomplete all as specified and directed. 162 Supply and fix automatic electronic voltage stabilizer of capacity 5.0 KVA having feautre such as intelligent time delay system, low and high voltage cut-off protection, latest IC technology to protect from power fluctuations, Thermal over load protection, wide input variation between 170V to 250V with output voltage stabilized at 220 to 240V with accuracy of +/- 2.5% complete all as specified and directed. 163 Supply ,laying commissioning ,testing of XLPE under ground LT cable 1100 volts grade of size 10 sqmm 4 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench ,fixing on wall ,under road crossing through proctection pipe etc including taking down old LT UG cable complete all as specified and directed. 164 Supply ,laying commissioning ,testing of XLPE under ground LT cable 1100 volts grade of size 6 sqmm 2 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench ,fixing on wall ,under road crossing through proctection pipe etc including taking down old LT UG cable complete all as specified and directed. 165 Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out including foming of bottom surface for laying of cable / pipe etc in soft/loose soil complete all as specified and directed. 166 Returning filling in including spreading levelling, watering and well ramming in layers not exceeding25 cm complete all as specified and directed. 167 Removing surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exc 1.5M above the starting point complete all as specified and directed. 168 M&L for sand cushioning, spreading & levelling, watering and well ramming in layers 8 cm thick before laying the cable and 15 cm after laying the cable and then punned. After punning the thickness of sand cushioning should be 18 cm thick. Note :- Only punned thickness shall be measured for payment purpose only. 169 Supplying & laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and directed. 170 GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed. 171 Cutting existing GI/CI/DI water supply pipe line upto 150mm dia and inserting clamp and all fitting for alterations or additions complete all as specified and directed. 172 Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia with all fitting laid in trenches complete all as specified and directed. 173 S&F in repairs gun metal or globe or gate valves 25 mm dia with iron wheel scewed both ends complete all as specified and directed 174 Supply and lay pipe galvanized, “Medium class”, including fittings 15 mm dia with all fitting laid in trenches complete all as specified and directed. 175 S&F in repairs gun metal or globe or gate valves 15 mm dia with iron wheel scewed both ends complete all as specified and directed.
Contract Date: Feb 07, 2026 Contract Value : 39.70 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttar Pradesh View Result →
45.
Defence #9484720 AOC
Tender For Additional / Alternator To Certain Omqs At Af Stn Bhisiana; 2 Taking down cement or cement lime plaster of any description and any thickness on brick, concrete or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer in Charge. 3 M&L for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc, complete all as specified and directed by Engineer in Charge. 4 M&L for rendering 12 mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc, complete all as specified and directed by Engineer in Charge. 5 M&L for rendering 5 mm thick cement plaster in CM (1:3) on fair faces ofconcrete surfaces in ceiling, complete all as specified and directed by Engineer in Charge. 6 M&L for rough cast plaster on brick wall consisting under coat of cement and sand mortar (1:4) not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even, complete all as specified and directed by Engineer in Charge. 7 M&L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engineer in Charge. 8 M&L for Complete removal of existing treatment and preparation of old plastered / unplastered surfaces of walls/parapats andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed by Engineer in Charge. 9 M&L for preparation of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling, complete all as specified and directed by Engineer in Charge. 10 M&L for preparation of old plastered surfaces of Ceiling and applying two coats of white wash on Ceiling, complete all as specified and directed by Engineer in Charge. 11 M&L for preparation of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed by Engineer in Charge. 12 M&L for preparation of old plastered surfaces of walls and applying two coats of white wash, complete all as specified and directed by Engineer in Charge. 13 M&L for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic/distemper oil emulsion acrylic, white or tinted over a coat ofprimer of same make, complete all as specified and directed by Engineer in Charge. 14 M&L for Complete removal of existing treatment andpreparation of old plastered surfaces of walls and applying two coats of Oil bound distemper acrylic /distemper oil emulsion acrylic, white or tinted over a priming coat of same make on wall surfaces, complete all as specified and directed by Engineer in Charge. 15 M&L applying 1-2 mm thick wall care putty (JK/Birla/berger) on walls, including making surface even and smooth using sand paper before applying Priming coat, complete all as specified and directed by Engineer in Charge. 16 Demolition of reinforced cement concrete of any description and in any position, cut as required to facilitate demolition, complete all as specified and directed by Engineer in Charge. 17 M&L for reinforced cement concrete 1:2:4, Type-B-1 (Using 20mm graded stone aggregate) in roofs, floors, kitchen platform, beams, lintels, Columns, shelves, staircase, landing,parapets and railings and with similar suspended works including necessary form work required at site and applying a coat of cement slurry over old surfaces of concrete to make perfect binding, complete all as specified and directed by Engineer in Charge. 18 M&L for reinforced cement concrete 1:2:4, Type-B-1 (Using 20mm graded stone aggregate) in chhajjas including necessary form work required at site and applying a coat of cement slurry over old surfaces of concrete to make perfect binding, complete all as specified and directed by Engineer in Charge. 19 M&L for Formwork to chullah hoods, shelves, chajjas, troughs and similar items in flats including edges, complete all as specified and directed by Engineer in Charge. 20 M&L for repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcherwith cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes, complete all as specified and directed by Engineer in Charge.Note:- The Extra area of 300mm around the actual affected area will be checked and repaired and only repaired portion will be taken for measurement. 21 M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 10 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide for rough finished concrete surface, complete all as specified and directed by Engineer in Charge. 22 M&L for mild steel TMTbars 8 to 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer in Charge. 23 M&L for mild steel TMTbars 6 to 8mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer in Charge. 24 S&F chicken wire mesh / hard drawn wire fabric of weight not exc 4 kg per sqm, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engineer in Charge. 25 Demolition of cement concrete unreinforcedof any description in any position not exceeding 150 mm thick (below or above ground level), complete all as specified and directed by Engineer in Charge. 26 M&L for 75 mm thick Plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) in plinth protectionfinishing cement concrete surface even and fair without using extra cement, including making construction joint at a interval not exceeding 3.00 m and at each corner and filled with sealing compound with grade A (normal) in 25/30, complete all as specified and directed by Engineer in Charge. 27 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer in Charge. 28 M&L for 25 mm thick cement concrete 1:2:4, Type B1 (Using 20 mm graded stone aggregate), as in sub base of floor, complete all as specified and directed by Engineer in Charge. 29 M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) for laying floor finishes, complete all as specified and directed by Engineer in Charge. 30 M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles, complete all as specified and directed by Engineer in Charge. 31 M&L for vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes, complete all as specified and directed by Engineer in Charge. 32 M&L for vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles, complete all as specified and directed by Engineer in Charge. 33 M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x350x7mm thick including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed by Engineer in Charge. 34 Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed by Engineer in Charge. 35 M&L for Granite (of any Type) worktable rubbed and polished 20 mm thick machine cut, in steps, jams, pillars, window cills, cooking platforms and like laid and bedded over 15 mm thick cement mortar in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed by Engineer in Charge. 36 M&L for 12-15mm thick green marble slab flooring including 15mm thick screed bed in CM (1:4)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab one side bullnosed etc, complete all as specified and directed by Engineer in Charge.Note: Cost of Screed Bed will deem to be included in the Quoted Unit Rate. 37 M&L for 12-15mm thick green marble in riser of steps, skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive kota stone and jointedrubbing and polishing, complete all as specified and directed by Engineer in Charge.Note: Cost of cement plaster deem to be included in the Quoted Unit Rate. 38 Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation, complete all as specified and directed by Engineer in Charge. 39 Demolition of cement concrete (unreinforced) exc 15 cm thickness but above ground floor, sunkan floor, complete all as specified and directed by Engineer in Charge. 40 M&L for 15 mm thick rendering in cement mortar (1:3) as in sunken portion walls and floor, mixed with water proofing compound 3%by weightof cement, finishing surfaces even & smooth without using extra cement, complete all as specified and directed by Engineer in Charge.Note :- water proofing compound shall be measured and paid under appropriate item of this Sch ‘A’ 41 Supplying only integral water proofing compound, mixed as per instruction given over it, complete all as specified and directed by Engineer in Charge. 42 M&L for bitumen hot blown any grade, applied hot, intwo coats to concrete surfaces at the rate of 1.5 Kg per Sqm per coat, including cleaning of surfaces, complete all as specified and directed by Engineer in Charge. 43 M&L for laying 50 micron polyethylene film, black in floors of sunkan, complete all as specified and directed by Engineer in Charge. 44 M&L for Plain cement concrete 1:5:10, type E-2 (using 40mm graded stone aggregate) in fillingof sunken floorand mass concrete, complete all as specified and directed by Engineer in Charge. 45 M&L for 50 mm diaGI sought pipefixed in sunken floors by means of cutting holes in wall/ taking down old u/s pipe, fixed andbeded in cement mortar/ PCC (1:2:4)and making good the disturbed portion of wall, complete all as specified and directed by Engineer in Charge. 46 Dismantling cast iron or reinforced concrete pipes, floor/walls up to 100 mm bore jointed in cement mortar and taking out, complete all as specified and directed by Engineer in Charge. 47 S&F of 110 mm bore PVC (SWR) pipes (Medium duty) single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts including dismantling of old outlet pipe etc, complete all as specified and directed by Engineer in Charge. 48 S&F of 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed by Engineer in Charge. 49 S&F of 110mm PVC (SWR) branch piece, single (single Y/T) equal or unequal, complete all as specified and directed by Engineer in Charge. 50 S&F of 75 mm bore PVC (SWR) pipes (Medium duty) single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts including dismantling of old outlet pipe etc, complete all as specified and directed by Engineer in Charge. 51 S&F 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed by Engineer in Charge. 52 S&F 75mm PVC (SWR) branch piece, single (single Y/T) equal or unequal, complete all as specified and directed by Engineer in Charge. 53 S&F in repair PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed by Engineer in Charge. 54 S&F in repair stack clamp for 75 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay including bolt and nuts and securing ends of stay to walls or roof, complete all as specified and directed by Engineer in Charge. 55 S&F in repair stack clamp for 100 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay including bolt and nuts and securing ends of stay to walls or roof, complete all as specified and directed by Engineer in Charge. 56 M&L for providing precast cement concrete cover slabs using cement concrete 1:2:4, Type B1 (Using 20 mm graded stone aggregate)(for manholes etc) and similar works, complete all as specified and directed by Engineer in Charge. 57 Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed by Engineer in Charge. 58 M&L 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engineer in Charge. 59 Fixing only 15 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required, complete all as specified and directed by Engineer in Charge. 60 Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed by Engineer in Charge. 61 M&L 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engineer in Charge. 62 Fixing only 20 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required, complete all as specified and directed by Engineer in Charge. 63 Cutting chases, pining in making good to facing where required and pointing incement mortar 1:3 for concealed water tubing, cutting not exc 10 cm girth, complete all as specified and directed by Engineer in Charge. 64 Dismantling PVCwater tanksExc 250 Ltr and n exc 500 Ltr and removing to store, complete all as specified and directed by Engineer in Charge. 65 M&L for three layered white colourRotational moulded polyethylene water storage tanks of 500 ltrCapacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer in Charge. 66 Dismantling PVCwater tanksExc 500 Ltr and n exc 1000 Ltr and removing to store, complete all as specified and directed by Engineer in Charge. 67 M&L for three layered white colourRotational moulded polyethylene water storage tanks of 1000 ltrCapacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer in Charge. 68 M&L for 20mm Ballvalves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed as in repairs, complete all as specified and directed by Engineer in Charge. 69 M&L for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Screwed both ends for iron pipes or for union and fixed in repairto 20mm dia of pipe, complete all as specified and directed by Engineer in Charge. 70 M&L for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Screwed both ends for iron pipes or for union and fixed in repair to 15 mm dia of pipe, complete all as specified and directed by Engineer in Charge. 71 M&L for Vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests complete including provision of lime concrete bedding fixed as in repairs, complete all as specified and directed by Engineer in Charge. 72 Supply only PVC (SWR) P’ trap 100 mm bore, complete all as specified and directed by Engineer in Charge. 73 S&F in repair china wash down water closet pedestal pattern white excluding flush and fix to position, including seat cover and connection to drain etc, complete all as specified and directed by Engineer in Charge. 74 S&F of Health faucet fixing in pipe etc, complete all as specified and directed by Engineer in Charge. 75 S&F of Toilet paper holder of stainless steel fixed to walls, complete all as specified and directed by Engineer in Charge. 76 S&F of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass corner shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed by Engineer in Charge. 77 M&L for PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, complete with flush pipe of polyethylene of low or high density or PVC 32 mm dia, including brackets/ fastening assesoriesof 10 litres capacity, fixed in repair, complete all as specified and directed by Engineer in Charge. 78 S&F in repair for mirror cabinet ofmin size 430x330 mm with operable door shutteras approved by GE, complete all as specified and directed by Engineer in Charge. 79 M&L for Vitreous China wash basin, white, flat back, size 550x400mm fixed on brackets or stands, including 32 mm waste coupling CP Brass, fixed in repair, complete all as specified and directed by Engineer in Charge. 80 S&F of CP Brass chromium plated bottle traps 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, complete all as specified and directed by Engineer in Charge. 81 S&F in repair wash hand basinBrass CP mixture 15mm bore for mixing hot and cold water screwed down for 15 mm iron pipe and fixed, complete all as specified and directed by Engineer in Charge. 82 S&F in repair 15 mm dia bore CP angular stop cock/Angle valve with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer in Charge. 83 S&F in repair15 mm dia bore CP concealed stop cockcast copper alloy chromium plated with long sahnk, fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer in Charge. 84 S&F in repair PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engineer in Charge. 85 S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and directed by Engineer in Charge. 86 S&F in repair, 15 mm diaBib taps,fancy type Chromium plated, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engineer in Charge. 87 S&F in repair, brass CP Wall mixer, 15 mm bore, for mixing hot and cold water , screwed down for iron pipe and fixed, complete all as specified and directed by Engineer in Charge. 88 S&F of wall mounted goose neck sink mixer (Hot and Cold)with provision of swivel arm, connecting legs and wall flanges, complete all as specified and directed by Engineer in Charge. 89 S&F in repair, Brass Chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed by Engineer in Charge. 90 S&F in repair stainless steel soap dish, complete all as specified and directed by Engineer in Charge. 91 S&F in repair Brass CP tubular towel rail of 20 mm dia, D type ,60 CM long between flange, complete all as specified and directed by Engineer in Charge. 92 S&F of stainless steel towel ring round/square with cap, with fixing screws, complete all as specified and directed by Engineer in Charge. 93 S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 600mm x 450mm, including 40 mm bore dia CP waste coupling (half/full threaded with 900 mm and PVC waste pipe min 900 mm long, complete all as specified and directed by Engineer in Charge. 94 S&F in repair, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including 40 mm bore dia CP waste coupling (half/full threaded with 900 mm and PVC waste pipe min 900 mm long, complete all as specified and directed by Engineer in Charge. 95 S&F in repair Kitchen Plate rack withof size 750x900x250mm of stainless steel, complete all as specified and directed by Engineer in Charge. 96 S&F of coat hooks of six pegs made out of stainless steel 45 cm long (as per sample), complete all as specified and directed by Engineer in Charge. 97 Dismantling of boarding in any position and in any description fixed with nail, complete all as specified and directed by Engineer in Charge. 98 S&F of 18 mm thick PVC ply of Plain colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as perspecifications, complete all as specified and directed by Engineer in Charge. 99 S&F of 18 mm thick PVC ply of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet Shutter/ drawer Front shutters, complete all as specified and directed by Engineer in Charge. 100 S&F of 5 mm thick PVC ply of plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base, complete all as specified and directed by Engineer in Charge. 101 S&F for 20mm wide & 1mm thick PVC edge bedding of PVC pested on edges with suitable adhesive, complete all as specified and directed by Engineer in Charge. 102 S&F of auto closing hinges operable at 0 degree for kitchen cabinet shutters, complete all as specified and directed by Engineer in Charge. 103 S&F of Ball bearing runners 45 mm Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs, complete all as specified and directed by Engineer in Charge. 104 S&F of stainless steel handles 100 mm size for kitchen cabinet shutters, complete all as specified and directed by Engineer in Charge. 105 S&F of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 486 x 500 mm with necessary fixing clips etc, complete all as specified and directed by Engineer in Charge. 106 S&F of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary fixing clips etc, complete all as specified and directed by Engineer in Charge. 107 S&F of chrome plated stainless steel wire basket (Jar basket) pull out type, size 536 x 500 mm with necessary fixing clips etc, complete all as specified and directed by Engineer in Charge. 108 S&F of chrome plated stainless steel wire basket (Thali basket) pull out type, size 380 x 500 mm with necessary fixing clips etc, complete all as specified and directed by Engineer in Charge. 109 S&F of chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 mm with necessary fixing clips etc, complete all as specified and directed by Engineer in Charge. 110 S&F of chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 mm with necessary sliding frame structure, fixing clips etc, complete all as specified and directed by Engineer in Charge. 111 S&F of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc, complete all as specified and directed by Engineer in Charge. 112 S&F of chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary sliding frame structure, fixing clips etc, complete all as specified and directed by Engineer in Charge. 113 M&L Continuous piano hingesstainless steel, bright finish width of flaps when open 40 mm, complete all as specified and directed by Engineer in Charge. 114 S&F of Hasp and staple safety type aluminium powder coated with mild steel pin including bolt to hinge plate and fix with screws 150 mm size of hasps and staples, complete all as specified and directed by Engineer in Charge. 115 S&F of Magnetic catcherfor cupboards, complete all as specified and directed by Engineer in Charge. 116 S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod/curtain rod 1 to 2mm thick with finals decorative, including fixing of brackets and both ends decorative nobs, complete all as specified and directed by Engineer in Charge. 117 S&F in repair MS powder coated Curtain Rods 18 to20 mm boreover doors and windows , with fixing MS powder coated brackets, including screws,rawal plug ,and PVC powder coated fineals/ fancy type end bulbs at each end of curtains rod, any colour etc, complete all as specified and directed by Engineer in Charge. 118 Taking down Chowkhats or frames (door/window) of any type not exc 1.5 Sqm each(without taking off shutters from the frames), complete all as specified and directed by Engineer in Charge. 119 Taking down shutter of area exc 1 sqm but n exc 2 sqm each, complete all as specified and directed by Engineer in Charge. 120 S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed by Engineer in Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made 121 S&F of Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed by Engineer in Charge. 122 S&F of 100 mm sizeButt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed by Engineer in Charge. 123 S&F of 125 mm size Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engineer in Charge. 124 S&F of 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engineer in Charge. 125 S&F of Anodised aluminium frame for doors, windows ventilators (Powder Coated)with one or more rebates including joining cleat for fixing etc, complete all as specified and directed by Engineer in Charge. 126 S&F of Powder coated Anodised aluminium side hung /sliding type window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, locks, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed by Engineer in Charge. 127 M&L for sheet glass ordinary quality 5.5mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc 0.5 sqm each pane all corner of glass to be fixed with silicon, complete all as specified and directed by Engineer in Charge. 128 S&F of Stainless steelwire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple, complete all as specified and directed by Engineer in Charge. 129 S&F of Powder coated aluminium decorative grill of size of mesh 75mm fixed with doors, window for safety of glass etc, complete all as specified and directed by Engineer in Charge. 130 S&F of steel window/ventilator of box section having 1.25 mm thick CRC sheetframe with double shutterinside gauged shutter and outsideglazed shutterwith one nos steel handle in each shutter, one nospeg stay in each shutter, complete with glazing bars and 08 Nos of 10 x 10 mm square guard bars in equal spacing, devoited or welded as per sample incl one coat of red oxide primer, The rates includes 4 mm thick plain sheet glass and galvanized mild steelwire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and 2 coat of synthetic enamel paint over a coat of zinc chrome primer), complete all as specified and directed by Engineer in Charge.Note : The design of window to be facilitated by cooler fixing provision where ever reqd) 131 Taking down chowkats & shutters without taking offshutters from the frame, size of openingexc. 1.50 sqm but not exc 4 sqmeach, complete all as specified and directed by Engineer in Charge. 132 S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed by Engineer in Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made 133 S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and directed by Engineer in Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 134 S&F of Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed by Engineer in Charge. 135 M&L for Cement Concrete 1:2:4, type B2 (using 20 mm graded stone aggregate) in hold fast of steel chowkhat/ frames etc, complete all as specified and directed by Engineer in Charge. 136 S&F of factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer in Charge. 137 S&F of factory made PVC Prelam wire mesh solid door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mm x 15mm for top, lock & bottom rail. M.S. frame shall have a coat of metal primer of approved make and manufacturer. 19mm x 19mm M.S. square tube shall be covered with heat moulded prelam sheet C channel made from 5mm (+ 0.25) thick PVC sheet of Density 600 kg/Cbm Manufactured by an ISO-9001-2015 certified company, of size 30mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90 degree angle on either side forming stiles, one of the 90 degree bend edge is cut from stiles as well as rails to nails from inner side of door to hide wiremesh fixing steel screws. 5mm (+25) thick 140mm wide PVC sheet out of which 125 mm shall be flat and 15mm shall be 90 degree on the inner side to form top and bottom rail and 155mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90 degree on both side to form lock rail. An additional 5mm (+25) thick PVC strip of 20mm width is to be stuck on the interior side of the CChannel using PVC solvent cement adhesive. Panel will be of GI/SS wire mesh of 24 gauge to be fitted inside area of stiles & rails. The wire mesh in top, bottoM&Lock rail is sealed with 15mm x 15mm tube with steel screw of size 13/6mm, 10mm (5mm x 2 nos) thick PVC strip of 25 mm width is to be stuck & nails on both side of G.I wire mesh interior at the top, bottoM&Lock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top & bottom rail Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screw drilled suitable to pass through both the walls of the M.S. tube. Other hardwares should be fixed with 19x6mm size steel screw etc, complete all as specified and directed by Engineer in Charge. 138 S&F of Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framedbalusters walk ways railings framework of water tanks, cooler stands and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed by Engineer in Charge. 139 Taking down shutter of any description exc 1.00 sqm but not exc 2.0 sqm each and refixing in same opening after easing and adjusting (Chowkat/frame changed) etc, complete all as specified and directed by Engineer in Charge. 140 S&F of 200 mm stainless steel barrel tower bolts of extruded section, complete all as specified and directed by Engineer in Charge. 141 S&F of 300 mm stainless steel decorative sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet , extruded sections and fixing bolts and sliding bolts of extruded section, complete all as specified and directed by Engineer in Charge. 142 S&F of 150 mm stainless steel alloy handles, anodised, complete all as specified and directed by Engineer in Charge. 143 S&F of floor door stopper of size 140 mmof aluminium ally body and tongue, anodised, with hard drawn steel spring ficed in floors, complete all as specified and directed by Engineer in Charge. 144 S&F of mild steel300mm ordinary rat tail rod pattern springs, including roller and roller plate fixed in repairs, complete all as specified and directed by Engineer in Charge. 145 S&F of Aluminium body door cill upto 1mtr length at bottom part of door to stop entry of insect inside the room, complete all as specified and directed by Engineer in Charge. 146 S&F in repairs galvanized mild steelwire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staple, complete all as specified and directed by Engineer in Charge. 147 M&L for Preparation of old wooden surface and applying two coat of synthetic enamel paint, complete all as specified and directed by Engineer in Charge. 148 M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces, complete all as specified and directed by Engineer in Charge. 149 M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint over, complete all as specified and directed by Engineer in Charge. 150 M&L for 75 mm thick Plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) in a sub base for floors/ path, hard standing etc, complete all as specified and directed by Engineer in Charge. 151 M&L for machine pressed precast concrete inter locking paver block any shape and size conforming to IS 15658-2006 of 40 mm thickness M-35 grade with grey cement and pigment, complete all as specified and directed by Engineer in Charge. 152 M&L for Sand filling under floors 20mm thick or in foundations including watering and consolidation, complete all as specified and directed by Engineer in Charge. 153 M&L for cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in kerbs or mud stops or on edges, complete all as specified and directed by Engineer in Charge. 154 Dismantling brick tiles or terracing tiles single layers on roof, complete all as specified and directed by Engineer in Charge. 155 Demolition of mud in roofs, any thickness including plastering/pcc padding and leaping (where full thickness removed or only a part there of), complete all as specified and directed by Engineer in Charge. 156 M&L for Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc including dismantling existing membrane, complete all as specified and directed by Engineer in Charge. 157 M&L for Brushing neat cement slurry with 3.0 kg of cement per sqm, complete all as specified and directed by Engineer in Charge. 158 M&L for providing cement concrete 1:2:4, type BO (Using12.5 mm graded stone aggregate) for providing slope, maintain level, roof kerbs or mud stops rounded or chamfered edges, complete all as specified and directed by Engineer in Charge. 159 M&L for 10 mm thick cement screed bed or bedding layer/ plaster in cement (1:4) mixed with water proofing compound on concrete roof surface, complete all as specified and directed by Engineer in Charge. 160 M&L for UV stable single component fibre reinforced elastomeric liquid applied waterproofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in three coats. The vital physical and chemical parameters shall be as under. Min elongation at break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be applied with brush or roller, complete all as specified and directed by Engineer in Charge. Also, proper surface preparation along with covingat corners is must. Note: The work shall be executed by the authorized applicator of the manufacturer only. 161 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar, complete all as specified and directed by Engineer in Charge. 162 M&L for brick work with subclass B bricks, straight or curved on plan exc 6 m mean radius, buit in cement mortar (1:6), complete all as specified and directed by Engineer in Charge. 163 M&L for brick work with subclass B bricks, straight or curved on plan to anybradius in half brick thick wall, built in cement mortar (1:4), complete all as specified and directed by Engineer in Charge. 164 SCH A PART - I (BUILDING WORK E/M PORTION) 165 Taking down carefully copper/ aluminium point wiring (light fan socket or power) complete along with fittings such as switches, ceiling roses, Pendants regulators Tube fittings and other Kit & Fittings/conduitfromsurface /wall Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location, complete all as specified and directed by Engineer in Charge.Note :- Serviceable fitting / fixtures will be reused in the work. 166 Taking down un-serviceable main switch, DB’s insulators, DB for MCB etc of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ), complete all as specified and directed by Engineer in Charge. 167 Taking down ceiling fan of any descriptions, servicing and repairs of fans as required, fixing back, connecting and testing the fanfor its satisfactory functionincluding making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ), complete all as specified and directed by Engineer in Charge. 168 Taking down exhaustfan of any descriptions, servicing and repairs of fans as required, fixing back, connecting and testing the fanfor its satisfactory functionincluding making good the disturbed surface and matching the colour of wall with the existing colour wash/paint/distemper wherever required (as per the existing ), complete all as specified and directed by Engineer in Charge. 169 S&F of exhaust fans steel body AC single phase 230/ 240 V ,50 Hz of size 300 mm sweep with louver, complete all as specified and directed by Engineer in Charge. 170 Taking down elect water heater of any descriptions, servicing and repairs (Including replacement of old pvc connection hot & cold2 Nos & 4 Nos fasteners) of geyseras required, fixing back, connecting and testing the geyser for its satisfactory functionincluding making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ), complete all as specified and directed by Engineer in Charge. 171 M&L for point wiringwith FRLSPVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawninand including rigid non metallic concealed PVC Conduit of suitable size (not less than 20 mm) on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes(Terminal boxes) with earth dolly, duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLSPVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable as earth continuity conductor to common earth and connected to earth dolly, complete all as specified and directed by Engineer in Charge.Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. 172 All as per description item no 2.07 but One light/fan point controlled by one 1-way switch 173 All as per description item no 2.07 but One light/fan point controlled by two 2-way switch 174 All as per description item no 2.07 but One3/5 pin socket outlet, 5 Amp on independent board 175 All as per description item no 2.07 but One3/5 pin socket outlet, 5 Amp on same board 176 All as per description item no 2.07 but One bell /buzzerpoint controlledby one push button on independent board 177 M&L for point wiring with FRLSPVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area) single core cable 1100 Volt grade drawninand including rigid non metallic concealed PVC Conduit on wall, surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes(Terminal boxes) with earth dolly, duly galvanised, with white shade frame & cover plate of suitable module for modular switch/ sockets including FRLSPVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable as earth continuity conductor to common earth and connected to earth dolly, complete all as specified and directed by Engineer in Charge.Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item. 178 Dismantling/ Taking down existing unserviceable sub main wiring from batten/ conduit of any size all as directed. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface/ location, complete all as specified and directed by Engineer in Charge. 179 M&L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 6 Sqmm single core through concealed rigid non-metallicPVC conduit of suitable size (Not less than25mm dia)inwall and surface of ceiling including 6 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly includingmakinggoodthedisturbedpotionofwall, complete all as specified and directed by Engineer in Charge. Note:- Two run of 6 Sqmm copper cable one run of 6 Sqmm copper cable and PVC conduit will be measured as a single length) 180 S&F of Switch Modular type, 6 Amp, 240 Volts , one way, complete all as specified and directed by Engineer in Charge. 181 S&F of Switch Modular type,6 Amp, 240 Volts , Two way, complete all as specified and directed by Engineer in Charge. 182 S&F of Switch Modular type, 16 Amp,240 Volts , one way, complete all as specified and directed by Engineer in Charge. 183 S&F of Socket outlet, Modular type, 6 Amp, complete all as specified and directed by Engineer in Charge. 184 S&F of Socket outlet, Modular type, 6&16 Amp, complete all as specified and directed by Engineer in Charge. 185 S&F of Bell Push, Modular type, 6 Amp, complete all as specified and directed by Engineer in Charge. 186 S&F of Fan regulator, modular type electronic step type, complete all as specified and directed by Engineer in Charge. 187 S&F of ceiling rose surface Bakelite two to three terminal 65x50 mm, complete all as specified and directed by Engineer in Charge. 188 S&F in replacement Tube light fittings LED type 1x20 Watt4 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable, complete all as specified and directed by Engineer in Charge. 189 S&F in replacement Tube light fittings LED type 1X10 Watt, 2 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable, complete all as specified and directed by Engineer in Charge. 190 S&F of LED bulk head,10 W, complete all as specified and directed by Engineer in Charge. 191 S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed by Engineer in Charge. 192 S&F of LED Bulb 9 watt 230 volt, 50 Hz retrofit type, complete all as specified and directed by Engineer in Charge. 193 S&F of bellding dong operating on AC 230 volt,50 HZ single phase, complete all as specified and directed by Engineer in Charge. 194 S&F of MCBDB SPN8 Waywith acrylic double door, complete all as specified and directed by Engineer in Charge. 195 S&F including flushing in wallMCB distribution board verticalTPN 4 way 415 Volts AC double door type sheet steel phosphotised powder painted with bus bar neutral earth barincluding provision of MCB TPN, FP 100 Ampconforming to IP 43as incomer, complete all as specified and directed by Engineer in Charge. 196 S&F of MCCB 4 pole100Amp 415 voltwith breaking capacity of 16 KA, complete all as specified and directed by Engineer in Charge. 197 S&F of MCB SPN 240V 40 Amps C series 10 KA, complete all as specified and directed by Engineer in Charge. 198 S&F of MCB SP 240V 6 to 32 Amps C series 10 KA, complete all as specified and directed by Engineer in Charge. 199 Taking Down the KWH meteralong with wooden board/DB after removingall electricalconnection, complete all as specified and directed by Engineer in Charge. 200 Refixing & connecting the same or newserviceableKWH energy meterafter wiring, complete all as specified and directed by Engineer in Charge. 201 S&F of Sheet metal enclosure factory made of size 20cm x 25cm x 12.5 cm deep box made out of 3.15mm thick ms sheet with double door with locking arrangement, epoxy power coated holes drilled for cable entries suitable for accommodating electric energy meterincluding brick/cement works as per site requirementincludiing flushing the box in walll and making good the disturbed portion of wall/ surface, complete all as specified and directed by Engineer in Charge. 202 Taking down old U/S LT UG cable of any size from trenches/ pipe/ floor/ walls, complete all as specified and directed by Engineer in Charge. 203 Supply,laying & jointing cable XLPEinsulatedPVC sheathedstrip wire armoured1100 volt4 core 25 sqmm multi stranded aluminiumconductor laid in trenches/wall/ducts etcincluding necessary fixing arrangement such as cable lugs glands etc completeafter removing/taking out extg unsvcable to the entire satisfaction, complete all as specified and directed by Engineer in Charge. 204 Excavation in trenches n.exc 1.5 mtr deep and n.exc 1.5 mtr wide getting out soil, complete all as specified and directed by Engineer in Charge. 205 Returning filling in including spreading levelling, watering and well ramming in layers, complete all as specified and directed by Engineer in Charge. 206 Removing excavated soil to a distance not exc. 50 mtr and depositing where directed, complete all as specified and directed by Engineer in Charge. 207 Supply and spreading dry sand in trenches for cushioning of cable, complete all as specified and directed by Engineer in Charge. 208 Supply and laying reinforced precast concrete cable cover Class LV, Type I, flat, size 250mm x 150mm x 40mm, complete all as specified and directed by Engineer in Charge. 209 S&F of HDPE pipe of size50mmdia, complete all as specified and directed by Engineer in Charge. 210 M&L for earthing complete withgalvanisedsteel earth plateelectrode 600x600x6mm thick burieddirectlyin ground(earth pitnot less than2 mtr deep belowground levelwith top edgwof the platenot less than 1.4 mtr belownormal ground level, connected earth wire 4 sqmm by means ofbolts nutscheck nutsand washersof galvanisediron or steelall as shownin electrical plateNo 5 connectedto earthingtest pointall as specifiedor indicated includingPCC pitin PCC (1:3:6) type C-1 cast ironframe50mm thickpre castRCC (1: 1 1/2:3)nominal mixcover slabreinforced with 8 mmdia mild steeldeformed bar15cc and suitable handleof 10 mm Diaround barincluding necessary excavationearth workin soft/loose soiland disposalof spoilto a distancen.exc 50m and funnelwithwatering pipewire meshcopper lugsetc GI protectionpipe of size 15 mm boreincluding testing, complete all as specified and directed by Engineer in Charge. 211 M&L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 4 Sqmm single core through concealed rigid non-metallicPVC conduit of suitable size (Not less than25mm dia)inwall and surface of ceiling including 4 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly includingmakinggoodthedisturbedpotionofwall, complete all as specified and directed by Engineer in Charge.Note:- Two run of 4 Sqmm copper cable one run of 4 Sqmm copper cable and PVC conduit will be measured as a single length 212 S&F of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp,240V, complete all as specified and directed by Engineer in Charge.
Contract Date: Jan 30, 2026 Contract Value : 33.93 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
46.
Defence #9450136 AOC
Provn Of 02 X Capital, Revenue And Minor Works In The Area Of Age B/R And E/M (Bhdc) Under Ge (East) Delhi Cantt-10; 1 Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. 2 Dismantling floor, hearth or wall tiling including cement mortar bedding and including disposal of all debris out side MoD land Complete. 3 M&L forvitrified ceramic light shade tiles10 mm thick (square /rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick Screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. ( Make: Kajaria, Somany, Johnsion) 4 BLANK 5 Taking down chowkats or frame(W/o taking off shutters from the frames) not exc 1.50 sqm each . 6 Description all as per item No 5 above but exc 1.5 Sqm but not exc 4 Sqm. 7 Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 8 S&F in position Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. 9 S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/valley gutter, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. 10 S&F mild steel plate (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/ connections etc. including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed. 11 S&F steel work in tubular column, purline, rafter etc using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed. 12 M&L for preparation of new or previously untreated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paints over and including one coat of red oxide primer complete all as specified and as directed. 13 Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and directed. 14 M&L for Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation/ laying/ taking up/ taking down of cables/ GI/ CI/ PPR Pipes etc and getting out in soft/loose soil complete all as specified & directed. 15 M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm on soft/loose soil complete all as specified and directed. 16 M&L for Removing surplus excavated material to a dist not exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified & directed. 17 M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate)as in foundation filling and mass concrete complete all as specified and directed. 18 M&L for 40 mm thick DPC in cement concretye (1:2:4) type B-0 (12.5 mm graded aggregates) incl integral water proofing compound as per manufacturers instruction, to horizontal & vertical surface incl necessary formwork complete all as specified and directed. 19 M&L for polythene film 50 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm on DPC complete all as specified and directed. 20 M&L for Brick work with sub-class `B bricks, straight or curved on plan exceeding6 M mean radius built in cement mortar (1:6) complete all as specified and directed. 21 M&L for reinforced cement concrete (Nominal Mix) type B-1 1:2:4 (using 20 mm graded stone aggregates) for Beams, Cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. 22 M&L for use and waste of Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc forrough finished surfaces of flat concrete surface complete all as specified and directed. 23 M&L for reinforced cement concrete (Nominal Mix) type B-1 1:2:4 using 20 mm graded aggregates for Chajjas complete all as specified and directed. 24 M&L for Form work to chullahhoods, chajjas, troughs and similar items incl edges forrough finished surfaces of flat concrete surface complete all as specified and directed. 25 M&L for reinforced cement concrete (Nominal Mix) type B-1 1:2:4 (using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like complete all as specified and directed. 26 M&L for use and waste of Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick Horizontal or sloping surface for rough finished surfaces of flat concrete complete all as specified. 27 M&L for Form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide ans sides of RCC/ PCCbands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide for rough finished surfaces of concrete complete all as specified. 28 M&L MS TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clipsall as directed by Engr-in-Charge. 29 M&L MS TMT bars5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clipsall as directed by Engr-in-Charge. 30 M&L 15 mm thick cement plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and fair complete all as specified. (incl new brick work) 31 M&L 15 mm thick cement plaster in CM (1:6) on fair face of brick or concrete surfaces of walls finished even and fair complete all as specified. 32 M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick putty complete all as specified and directed. 33 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over incl applying 1.50 mm (average thickness) wall care putty onnew surfaces of walls to bring the surface even and fair complete all as specified and directed. 34 M&L rendering 10 mm thick cement plaster in CM (1:3) on fair face of brick or concrete surfaces on ceiling finished even and fair complete all as specified and directed. 35 M&L Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00 mm thick putty complete all as specified and directed. 36 M&L Granite (of any type) tiles 20mm thick (approved colour) machine cut,bedded with 15 mm screed bed in cement mortar 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. 37 M&L 20 mm thick granite (of any type) (approved colour) machine cut as in vertical surfaces and skirting/ dado over including 15 mm thick rendering in CM 1:4 jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing complete all as specified. 38 M&L 75 mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base of floor complete all as specified and directed. 39 M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as insub bsae floor complete all as specified and directed. 40 M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stones aggregates) with integral water proofing compound, as in padding concrete to maintain proper slope as required complete all as specified and directed. 41 M&L for treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness in four layer(100micron each layer) having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371 , respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 00 as per IS: 101 (P-7/Sec-3) 1990 having VOC less than f g/ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure for 7days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along WIth water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25 - 40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P -8/Sec6)1993 and also should pass Impact test as per IS: 101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes cleaning the surface with wire brush and washing cleaning to remove all dust, fungus, etc.The work will be done under the supervision of the Engineer-in-charge.The coating thickness and the methodology of application shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by the Engineer-incharge. The manufacturer shall give a warranty for the peformance& durability for 10 years.Make : Dr Fixit / Starshield / SIKA 42 M&L for Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) 43 M&L for Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 44 Supply only 5.5 mm selected quality plain / frosted glasses of required size complete all as specified and directed 45 M&L Hard core of broken stones or boulders of gauge not exe 63mm, deposited spread, levelled in layers n exe 15 cm thick watered and rammed to a true surface, complete all as specified and directed by Engr-in-charge. 46 M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded aggregates) as in plinth protection laid to slope 1 in 12 and finishing cement concrete surface even and fair with and incl all necessary form work to divide the area in panels, finishing exposed edges rough or rounding or chemferring where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by wt.) complete all specified and directed. 47 M & L Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in charge. (approved by EIC) Make :- Somany or equivalent in Kajaria/Johnsion 48 M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:4 on wall complete in all respect as specified. Colour and pattern approved by EIC) Make :- Somany or equivalent in Kajaria/Johnsion 49 S and F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tubeusedas per specifications and drawings incl fasteners and make good the damage portion complete all as specified and directed. 50 Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelamMoulded PVC Sheet on the front face 2mmthick plainPVC sheet on back face to be fixed onframe at site as per specification & drawing complete all as specified and directed. 51 S&F200 mm Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. 52 S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed. 53 S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. 54 Supply and fixedFloor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, 55 M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. 56 M & L for providing & fixing semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 57 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 in brick wall to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. 58 S&F 15 mm bore ofmedium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as directed. Make : TATA / Jindal / Oswal 59 S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified and directed.Make : TATA / Jindal / Oswal 60 S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece/ Tank Nipple etc complete all as specified and directed. Make : Prayag/ Sintex/Vectus 61 S & F ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed. 62 S&F 20 mm boregun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixedcomplete in all respect as specified and directed. 63 S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Make:-Finolex / Supreme/ Vectus 64 S & F 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Make:-Finolex / Supreme / Vectus 65 S&F 75 mm dia PVC (SWR) floor trap, plain with CP grating 125 mm dia round including jointing with solvent cement fixed with cement mortar including necessary cutting etc complete all as directed 66 S & F 110 mm PVC (SWR) bends any radius complete all as specified and directed. 67 S & F 75 mm PVC (SWR) bends any radius complete all as specified and directed. 68 S & F 110 mm PVC (SWR) reducers complete all as specified and directed. 69 S & F 110 mm PVC (SWR) WC Connector bend type complete all as specified and directed. 70 M&L for Cutting in to existing man holes for connecting new drains for internal dia of pipe 100 mm, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1 : 2 :4 type B1 smooth finished and reforming benching as required,complete all as directed and specified. 71 S & F in repair Vitreous China wash down water closet pan (S-Trap) 1st quality (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified. MAKE : Parryware / Hindware /Jaquar 72 S and F in repairs PVC valveless, syphonic action type, flushing cistern of 10 lit capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CPFlush pipe of Low level cistern complete all as specified. MAKE : Parryware / Hindware / Jaquar 73 S & F PVC connections 15mm size with PTMT steelnuts of length 450mm Make : Prayag 74 S&F Health Faucet (ABS Body) CP Brass suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook incl making connections and fixed in position complete all as specified and directed. (F8035101RG) 75 S&F CP Brass 1st quality Soap Dispenser with glass bottle with complete in all respect complete as specified and directed by Engr-in-Charge. (F5001111RG) 76 S&F Toilet paper holder of CP brass with stainless steel flap fixed to walls with CP brass screws complete in all respect complete as specified and directed by Engr-in-Charge. (F5014110RG) 77 S&F CP BrassTubular towel rail, 20 mm dia, D type,600 mm long fixed to walls with CP brass screws complete in all respect complete as specified and directed by Engr-in-Charge. (F5014103RG) 78 S&F CP Brass 15mm bore dia anglular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect as specified and directed by Engr-in-Charge. (F1021201RG) 79 S&F CP Brass 15mm bore dia 2 way bib cock with wall flange withincluding cover plate complete in all respect as specified and directed by Engr-in-Charge. (KUP-BGP-35041PM) 80 S&F Thin Rim Table top basin of size: 450x400x160 mm (S2020101RG) in white colour, 32 mm waste copling with pop up push type (F8050351RG), incl fixing on plateform with all required accessories/ fixtures complete in all respect as specified and directed. 81 S&F corner shelf (set of 03) 200mm to 300mm size5.5 mm thick toughened glass with CP Brass bracket and railing complete all as specified and directed. make :- Paryag Cat no BEA 48 82 S & F CP Brass Double Soap Dish with tumber holder complete all as specified and directed. (F5014106RG) 83 S&F 32mm bore dia CP finish copper alloy bottle trap heavy complete in all respect as specified and directed by Engr-in-Charge. (ALD-BGP-769L300x190) 84 S&F CP Wall mixer (wall mounted model ) 2-1 system (F1021401RG)with bend pipe for overhead shower, Over headshower 300 mm dia with 450 mm shower arm and wall flange ( 7010112RG) complete all as specified and directed. 85 S&F 712 mm dia round mirror mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete in all respect as specified and directed. (K-26050-BGL) 86 S&F 15mm bore dia Stainless steel finish deck mounted high neck sensor tap basin mixer round spout with popup Waste assemlywith 10mm dia , 450 mm long copper pipes complete in all respect as specified and directed by Engr-in-Charge. (F6010108RG) 87 S&F Solid PVC Wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of soclvent cement and fixing at site on PVC frame as per specifiecations and drawing, complete all as specified and directed. 88 S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fizxing on to wall to nake PVC Frame as per specification and drawing, complete all as specified and directed. 89 S&F Aluminimun powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hings anodised aluminium snap beading screws etc, complete all as specified and directed. 90 S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no), hings type B-21, 100mm long (2 Nos) suitable handle (1 No), complete all as specified and directed. 91 S&F powder coated aluminium of various section as requited for frame of window/ ventilators etc with one or more rebates including jointing cleats for fixing etc, complete all as specified and directed. 92 S&F Aluminium powder coated decireative grill with 6.3mm thick aluminium section and 100 x 100mm openings, weighing not less than 1.75kg/Sqm and anodized aluminium U shape channel frame work around the grill and fixed with steel screws, complete all as specified and directed. 93 S&F CP Brass Robe Hook complete in all respect as specified and directed by Engr-in-Charge. (F5014108RG) 94 M&L for point wiring in casing capping type with 1.5 sq mm Nominal cross sectional area, single core, 1100 Volt grade, multi stranded, PVC insulated, unsheathed FRLS copper conductor cable and connected to common earth and earth dollywith suitable copper lugs and drawing into and including PVC Casing Capping complete with all accessories and modular PVC Box , modular white cover plate with frame, blanking plate etc suitable for upto required module etc completefor one light / bell / fan point controlled by one, one way switch 06 Amp, complete all as specified and as directed. 95 Description all as per item No. 94 here in before but for one three pin, 5 Amp, socket out let on same board completeall as specified and as directed. 96 Description all as per item No. 94here in before but point wiring with 2.5 Sqmm,multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor completeall as specified and as directed. 97 Descripton all as per item No. 94 here in before but point wiring with 4 Sqmm,multistranded, copper conductor cable,on independent board with 4 Sqmm size earth conductor completeall as specified and as directed. 98 S&F in repalacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed. 99 S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 modulecompleteall as specified and as directed. 100 S&F in replacement modular Switch, 1 way, 6 Amp, 1 Module, completeall as specified and as directed. 101 S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 modulecompleteall as specified and as directed. 102 S&F in replacement modular Switch, 1 way, 16 Amp, 1 Module, completeall as specified and as directed. 103 Supply, fixing and connecting in replacement recessed mounting Ultra slim Round LED Down light 15 watt designed white colour,with excellent thermally managed aluminum pressure die cast housing with heat - dissipating fins for large surface area finished in epoxy powder coated , deliver high efficacy lightcomplete with all accessories all as specified and as directed. 104 Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet FittingPolycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable forWhite Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to2.5KV . Total system Lumen of 20W Led should be2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. 105 Supply & fixing of Wall mounted fan(White colour) 230 V, 400 mm sweep,speed 1350 RPM , complete all as specified and directed by Enggr in charge. 106 Supply, Installation, Testing and Commissioning of Air Cooled inverter based Split AC unit with cooling function, Air Conditioner i.e electric driven single phase of capacity 2.0 TR, minimum 3 Star rating charged with Ecofriendly Refrigerent and comes with special health filter and all connected accessories and fixing of copper pipe & cable from indoor to outdoor with making suitable size of hole in any type of wall, including PVC drain pipe from indoor unit, Outdoor split AC hanging wall mounted/floor mounted stand and flxible PVC Casing pipe minimum 40 mm dia covered on all exposed copper insulated pipe line and PVC wire etc. complete all as specified and as directed by Engg-in-charge. 107 Supply and fix ofVoltage Stabilizerfor automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output Voltage stabilized at 230 Volt with accuracy of +2.5% and of capacity 5 KVA. 108 M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mmbore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upperedge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn ofPCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed. 109 S & F in replacement for distribution board double door type, SPN, 8 way,completeincluding 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. 110 S & F in replacement MCB DP, 240 Volts, 63 Amps complete all as specified and directed. 111 S & F in replacement MCB SP, 240 Volts, 10 Amps complete all as specified and directed. 112 S & F in replacement MCB SP, 240 Volts, 16 Amps complete all as specified and directed. 113 S & F in replacement MCB SP, 240 Volts, 20 Amps complete all as specified and directed. 114 Excavation in trenches not exc. 1.5 mtr width but additional to 1.5 m deep in soft loose soil for laying/taking up/taking down of cablesand getting out and excvation for Poles upto 1.5 m levelling of bottom surface to required level all as specified and directed by Engg-in-charge. 115 Material and labour for river washed and screened , dry sand for filling in trenches below and around underground cables for cushioning of cables etc complete all as specified and directed. 116 S&F sub class B bricks having minimum compressive strength 75 Kg/sqcm laid in trenches for cable protection etc complete all as directed by Engg-in-charge. 117 Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth strip 32 x 6 mm size upto a distance of 7.5 mtr long by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including execvation earth work drilling holes for electrode PCC Pit & Cover, Funnel, water pipe , lugs etc complete in all aspect as specified and as directed. 118 Supply, laying galvanised eatrh strip 32 x 6 mm size connected to earthing by means of bolt, nuts, check nuts and washers of galvanised iron or steel complete all as specified and as directed. 119 Supply, laying and testing of 3.5 core 95 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed. Make : Polycab / Havells / Finolex 120 Supply, laying and testing of 3.5 core 50 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed.Make : Polycab / Havells / Finolex 121 Supply, laying and testing of 3.5 core 35 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed.Make : Polycab / Havells / Finolex 122 Supply, laying and testing of 3.5 core10 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed.Make : Polycab / Havells / Finolex 123 M&L in replacement for sub main wiring with 2 runs of10 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 32mm medium grade as per ISS and one run of 6 sqmm sizeearth wire PVC insulated copper conductor complete all as specified and directed.(Note Two runs of 10 sqmm copper FRLS cable & one run of 10 sqmm copper cable in and including 32 mm PVC conduit medium grade will be measured as one unit. 124 Supply and Installation, testing , commissioning outdoor type feeder Piller Box made out of 3.15 mm thick CRCA sheet , 415 Volt, 3 Phase, 50Hz supply factory made & MS angle section 40 x 40 x 5 mm frame with front and back openable double door with provision of locking arrangement dust and vermin proof, gasket, Aluminium 400 Amp TP busbar & 200 Amp for neutral shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proff duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete allas specified and as directed. 1. INCOMMER 1.1 MCCB, 4 Pole , 35 KA , 400 Amp -01 No 2. OUTGOING 2.1 MCCB, 4 Pole , 35 KA , 160 Amp -02 No 2.2 MCCB, 4 Pole , 35 KA , 100 Amp -02 No 2.3 MCCB, 4 Pole , 16 KA ,63 Amp -01 No 2.4 SPARE 125 M&L Boring holes 2 m deep in soil for under-reamed piles and getting out and disposal of spoil to a distance of n exc. 50 m including HDPE pipe of 200 mm dia suitable for 0.4 mpa working pressure complete all as directed by Engg-in-charge. 126 Supply, Installation , Testing and Commissioning of Hybrid Type Solar integral AIO (All-in-One) street light with high pressure die-cast (LM6 Alloy) Aluminium housing, reliable & robust construction with IP65 & IK08 protection including galvanised ironpole (6 meter ) suitable for OD 50/60mm bracket, having Min 5000 system lumens, suitable for 24hrs (2 Nights) Autonomy. The luminaire should work on Hybrid mode with priority for solar, in case solar charging is not available then it should automatically switch to AC grid supply for reliable operation. Dimming Profile: From Dusk – First 04 hours full brightness level Next fixed at 30% Brightness level Lithium Pherrophosphate Battery capacity min 30Ah @ 12.8V or 256Wh Battery Temp range -10 to +50℃. Panel capacity min 60Wp, CRI >=70 SystemEfficacy >175lm/W System wattage should not be more than 30W ± 2% If wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. The fixture should have designed for street light application & should have flexible angle of mounting from 0-15 Degree for divers geographical condition. Life class of LED System 50000hrs @ L70 , charger efficiency >90% and standards IEC62109-1, IEC61547, CISPR15, IEC62093, IEC61347-2-13, EN50530, IEC62384 or equivalent BIS Standards. The PV module should be made up of crystalline silicon solar cells Mono-Crystalline and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730 1,2 IEC60598, Operating temp -10 Degree C to 50 Degree C, certifying above given parameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory. MAKE:-Phlips BRP111 Solar Gen 2 Solar HY Street Light or equivalent 127 Supply , Installation , testing and commissioning of factory made CPRI approved , outdoor type ,Timer Operated LT Panel3.15 mm thick totally enclosed dust proof duly painted with powder coated fully wired up and ready to connect load & control line in comprising the followings. 1.Incoming MCB 63 Amp 10 KAPole C Curve 2.Analog QT Timer 16 A 240 V AC 3.Power Contractor 32 A 3 Pole 4. Power Contractor 9 Amp 3 Pole (Up and Down) 5. Auto Manual Selector switch 6 Amp 2 Pole 6.Push Button 7.Indicating Light 8. Protection MCB 6 Amp SP 9. Outgoing terminal 3 and 4 way 128 Supply & Installation of Street light SMC junction box (Sintex make) with C-Channel & terminal connector with glass fuse complete in all aspect all as specified and as directed. 129 M&L PCC 1:3:6 type C1 using 20 mm graded stone aggragate as in coping of pole all as directed. 130 S&F in repair load line, distribution board, double door type, TPN, vertical, 8 way,suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. 131 S & F in replacement MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed. 132 S & F in replacement MCB SP, 240 Volts, 63 Amps complete all as specified and directed. 133 S&F of desert cooler ofsize ≥ 26x26X40 inch, 5000 CuM/Hr, fabricated full body part with GI sheet of thickness 18 SWG, GI sheet having suitable door handle fitted with cooler, heavy duty exhaust type fan motor in three speed mode (Low, medium and high) having ≥ 1400 RPM, Exh type fan blade of 18 size sweep (4 leaves), material of fan blade & hub should be metal type, honeycomb cooling pads , front grill with louvers also should be metal type, heavy dutyISI marked submersibile pump having output head 1m height, fan motor are made copper winding, GI wire mesh with pad set size 1x1 should be made of ≥12 SWG, Whole body should be painted with double coated red oxide paint of good quality, tank capacity should ≥ 150 ltrs complete all as specified and directed by engr in charge. Motor & pump make : Khaitan/ Crompton greaves/ usha or equvilent 134 Supply and fixed prefabricated MS desert cooler stand for desert cooler of size 26x 26x 35 made out of MS angle iron frame of size 25 x 25 x 4 mm in cubical shape and MS flat iron strip of size 20 mm width and 3 mm thickness to hold the legs of cooler stand at the bottom including welding and duly painted with two coat of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. 135 Supply and fixed of Modular Switch 1 way 6 Amp complete.Make : Anchor/ Phillips/ Legrand. 136 Supply and fixed of Modular Socket 6A, 2/3 Pin combined 2 module , Make :- Make : Anchor/ Phillips/ Legrand. 137 Supply and fixed of Module cover plate with frame for 3 module Make :- Make : Anchor/ Phillips/ Legrand. 138 Supply and fixed of Moduler metal Flush box for 3 moudle Make :- Make : Anchor/ Phillips/ Legrand. 139 Supply and fixed of Moduler plug top of 6 Amps. Make :-Make : Anchor/ Phillips/ Legrand. 140 Supply ,installation ,testing and commissioning ofwater cooler , having storage capacity of 150 litres/Hr and nominal cooling capacity of 150 Litres/Hrs, electric driven, single phase, stainless steel type body, ecofriendly R134a refrigerant complete all as specified and directed. Make : Usha/ Voltas/ Sidhwal 141 Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA . (Make: V-guard/Bluebird/Volina) 142 M&L for sub main wiring with 2 runs of1.5 sqmm single core, PVC insulated & unsheathed (FR) cable 1100 Volts grade with multi stranded, copper conductor drawn through casing caping concealed conduit including PVC rigid conduit medium grade as per ISS and one run of 1.5 sqmm size PVC insulated copper conductor complete all as specified and directed.(Note. Two run of cable and earth conductorshall be measured as one length) Make :Make-Havells/Finolex/Polycab. 143 Supply, laying, connecting and testing ductile iron (DI) pipe, 100 mm bore, with spigot and socket ends, conforming to IS: 8329/2000 classification, medium grade (K7class),with screwed and socketed joints, suitable for push-on-joint (Rubber gasket-D jointing) with cement mortar lining inside the pipes and outside zinc coating with bituminous finish coat as per IA 8329/2000 including EPDM rubber joints conforming IS: 5382 of 1985, laid in trenches or laid in floor,including making good the disturbed surfaceincluding taking out old rusted/ unserviceable GI/CI/DI pipe 100 mm inner dia by unscrewing and cutting complete all as specified and as directed. 144 Supplylaying, connecting and testing, 3 layer PPR (Polypropylene random co polymer) pipes40 mm bore,SDR 7.4 & SDR 11, UV stabilized and antimicrobial welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings, fixed complete to walls, ceiling or in floors or laid in trenches etc. including complete fitting and making good the disturbed surface complete all as specified and as directed. 145 S & F PP-R Ball valve, suitable for 40 mm bore pipe, (brass insert) as per site requirementcomplete all as specified and as directed. 146 Supply, laying and testing GI water tubing 80 mm bore, medium grade with all fittings with screwed and socketed joints and fixed in trenches and making good the disturbed surface complete all as specified and directed. 147 Supply,laying and testing GI water tubing 50 mm bore, medium grade with all fittings with screwed and socketed joints and fixed in trenches and making good the disturbed surface complete all as specified and directed. 148 Supply,laying and testing GI water tubing 40 mm bore, medium grade with all fittings with screwed and socketed joints and fixed in trenches and making good the disturbed surface complete all as specified and directed. 149 S&F ductile iron fittings for pipe i.e. bends (any type, radius and angle), tapers any type (straight, bends, increasing, decreasing or double socket etc) tee pieces, single branch, Y junction, double branch, collars, caps, plugs etc for spigot and socket/flanged ends suitable for upto 150 mm bore pipe, conforming to IS specificationcomplete all as specified and as directed. 150 Demolishing the old unsv valve chamber and M&Lfor construction of valve chamber of size 1050mm x 1050mm x 1500mm in CM 1:6, depth of the chamber to be reckoned from the top of the PCC to top of the MS cover as 1.5 Mtr including MS sheet cover fabricated from 3mm thick MS sheet and frame of angle iron 40mm x 40mm x 6mm with all fixing and locking arrangement and painting two coats of synthetic enamel paint over a coat of red oxide on MS cover & frame including necessary excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distrance n.exc 50m, including 15mm thick plaster in CM 1:4 (both internally & externally) complete all as specified and directed by Engr-in-Charge. 151 BLANK 152 Supply, laying, jointing and testing of 3 core 95 sqmm size XLPE insulated, armoured heavy duty electric HT cable with aluminium conductor, 11000 volts grade complete all as specified and as directed. Make : Polycab / Havells / Finolex 153 S&F for cable jointing kit for 11 KV earthen grade cable for straight through joint Heat Sink type joint complete with jointing kit & accessories suitable 3 core XLPE armoured Aluminium conductor cable of size 95 sqmm all as specified and as directed. 154 Supply, laying, jointing and testing of 3.5 core 185 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed. Make : Polycab / Havells / Finolex 155 Supply, laying, jointing and testing of 3.5 core 25 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed. Make : Polycab / Havells / Finolex 156 Supply, laying ,jointing and testing of 3.5 core 240 sqmm size XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade complete all as specified and as directed. Make : Polycab / Havells / Finolex 157 Supply and Installation, testing , commissioning outdoor type feeder Piller Box made out of 3.15 mm thick CRCA sheet , 415 Volt, 3 Phase, 50Hz supply factory made & MS angle section 40 x 40 x 5 mm frame with front and back openable double door with provision of locking arrangement dust and vermin proof, gasket, Aluminium 400 Amp TP busbar & 200 Amp for neutral shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proff duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete allas specified and as directed. 1. INCOMMER 1.1 MCCB, 4 Pole , 35 KA , 630 Amp -01 No 2. OUTGOING 2.1 MCCB, 4 Pole , 35 KA , 250 Amp -04 No 2.2 MCCB, 4 Pole , 16 KA , 125 Amp -02 No 158 Supply and installation of air cooled inverter based split AC unit with heating and cooling functions, Air conditioner is electric driven single phase of capacity 1.5 TR, minimum 3 star rating with charged with Eco friendly Refrigerent and comes with special health filter and all connected accessories and fixing of copper pipe from indoor to outdoor, connection of cable indoor to outdoor unit, and making of hole in any type of wall,including PVC drain pipe from indoor unit, Outdoor split AC hanging wall mounted/ floor mounted stand and flexible PVC casing pipe minimum 40mm dia covered on all exposed copper insulated pipe line and PVC wire etc complete all as specified and directed by eng-in-charge. Make : Hitachi/Voltas/LG/ Blue star/Camipro/ carrier or equivalent 159 Description all as item No. 158 above but capacity 2.0 TR, complete all as specified and directed. 160 Supply and fix Copper pipe of size 14 with nitrile rubber insulation complete all as specified and directed. 161 Supply and fix Copper pipe of size 12 with nitrile rubber insulation complete all as specified and directed. 162 Supply and fix Drain pipe of suitable size as per requirement complete all as specified and directed. 163 Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA .Make: V-guard/Bluebird/Volina or equivalent 164 Supply and fixed floor mounted water dispenser unit of storage capacity 3 Ltr, cooling capacity 2.5 Ltr/Hr, heating capacity 5 Ltr /Hr,hot & cold function, ecofriendly refrigerent,electric driven and single phase complete all as specified and directed. Make : Voltas/ Bluestar or equivalent 1 Old u/s material obtained from srl item No 5 of BoQ Each 3.00 315.00 945.00 2 Old u/s material obtained from srl item No 6 of BoQ Each 1.00 263.00 263.00 3 Old u/s material obtained from srl item No 7 of BoQ Sqm 45.00 84.00 3780.00 4 Old u/s material obtained from srl item No 72 of BoQ Each 1.00 32.00 32.00 5 Old u/s material obtained from srl item No 92 of BoQ Each 2.00 12.00 24.00 6 Old u/s material obtained from srl item No 93 to 96 of BoQ Each 36.00 3.00 108.00 7 Old u/s material obtained from srl item No 97 of BoQ Each 18.00 10.00 180.00 8 Old u/s material obtained from srl item No 98 of BoQ Each 6.00 12.00 72.00 9 Old u/s material obtained from srl item No 103 of BoQ Each 2.00 15.00 30.00 10 Old u/s material obtained from srl item No 104 & 126 of BoQ Each 50.00 14.00 700.00 11 Old u/s material obtained from srl item No 105 to 107 of BoQ Each 12.00 5.00 60.00 12 Old u/s material obtained from srl item No 117 of BoQ RM 400.00 20.00 8000.00 13 Old u/s material obtained from srl item No 124 of BoQ Each 2.00 35.00 70.00 14 Old u/s material obtained from srl item No 125 of BoQ Each 2.00 25.00 50.00
Contract Date: Feb 04, 2026 Contract Value : 39.71 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
47.
Defence #9393348 AOC
Tender For Repair And Renovation Of 12 Nos Type Iii Qtrs At Arc Sarsawa; 1 Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified& directed. 2 Material and labour for brick work with sub class B, burnt clay bricks of old size, designation 100, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:6 complete all as specified & directed. 3 Material and labour for brick work with sub class B, burnt clay bricks of old size, designation 100 straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed. 4 Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. 5 Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified. 6 Material and labour for rendering 15mm thick in two layer in CM 1:4 with water proof compound on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cementcomplete all as specified.Note : Water proofing compound shall be measured and paid for seperately. 7 Material and labour for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified. 8 Material and labour for preparation of new plastered surfaces of walls apply two or more coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specificationincluding priming coat a primer applied @ 0.90 litre/ 10 sqmon the surface complete incuding necessary scaffolding all as specified and directed at any height . Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make -Asian Paints Royal(10 years product warranty) orNerolac(10 years product warranty)/Berger(10 years product warranty) at any height incuding necessary scaffolding. 9 Material and labour for preparation of complete removal of existing surfaces of walls apply two or more coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specificationat any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make -Asian Paints Royal(10 years product warranty) orNerolac(10 years product warranty)/Berger(10 years product warranty) at any height incuding necessary scaffolding. 10 Material and labour for preparation of new plastered surfaces of Ceiling apply twocoat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specificationincluding priming coat a primer applied @ 0.90 litre/ 10 sqmon the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make -Asian Paints Royal(10 years product warranty) orNerolac(10 years product warranty)/Berger(10 years product warranty) at any height incuding necessary scaffolding. 11 Material & Labour for preparation of new plaster surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces.Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paintapplication).Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding. 12 Material and labour for preparation of Old plastered/complete removal of existing surfaces of Ceilingapply distempering two or more coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmshould be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make -Asian Paints Royal(10 years product warranty) orNerolac(10 years product warranty)/ Asian Paints Royal(10 years product warranty)/ Berger(10 years product warranty) at any height incuding necessary scaffolding. 13 Material and labour for exterior or interior waterproof/weather proof cement based1 mm thick putty @ 1 Kg(undiluted) per sq mtr. onnew plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. 14 Taking down shutter of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed. 15 Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including cutting holes required fortaking out existing hold fast etc. complete all as specified and as directed. 16 Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre and not exceeding 04 Square Metre each , removing from the site including cutting holes required fortaking out existing hold fast etc. complete all as specified and as directed. 17 Material and labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam sheet instead ofWood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. 18 Supply and fixinging Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam both side PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, stile & rails feathered at edges, suppling & fixing in the frame at site as per specification & drawing. 19 Supply and fixinging 35 mm thick IInd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.Note : Door shutter width not exc 0.85mwith single shutter each door but door shutter width exc 0.85m two panel shutter each doorwithout any extra cost. 20 Material and labour for Flush shutters 32 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge. 21 Material and labour for for preparing of newuntreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer complete all as specified. 22 Material and labour rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixingconforming to Fe-410(Gde E-250) quality A complete all as specified and as directed by the Engineer-in-Charge. 23 Material and labour for rolled mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified & directed. 24 Supply and fixinging for 18/19mm thick High Density High Moisture Resistant board (HDHMR) Prelaminated both sides as in Controllers Desk ,palmed boxes,showcase,shutters of Cup Boards etc including 6mm designing teak wood beading on edges complete all as specified and as directed by Engr-in-Charge. 25 Supply and fixinging 75mm extruded brass handles, fabricated type polished complete all as specified & directed by Engr-in-Charge. 26 S & F Width of flaps (when open) 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed by Engr-in-Charge. 27 Supply and fixinging FAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for for Wadrobe, Cupboard and Almirah Door. (SS MAT)with Mounting Screw complete all as specified 28 Material and labour for forclamps , hold fasts; wall ties, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts plate washers and similar small articles conforming to Fe-290 Gde-E-165 ® as directed by Engr-in-Charge. 29 S & F IInd class hard wood plain solid straight chowkat and frame wrought framed rebatted on the solid rounded or chamfered put together with glue pinned at joint complete all as specified. 30 Supply and fixinging stainless steelhinges 100mm long medium weightto pressed steel/angle iron frames by welding/screws all as specified. 31 Supply and fixinging aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed 32 Supply and fixinging aluminium anodised barrel tower bolt 200mm size extruded section, ISI marked & fixed 33 Supply and fixinging extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked. 34 Supply and fixinging 300mm Aluminium alloy, anodised, sliding door bolt with hasp ,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. 35 Supply and fixinging anodized aluminium frame with power coating (minimumthickness 50 micron) and other sections for doors, windows, ventilators, partitions,with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. 36 Supply and fixinging anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimumthickness 50 micron)including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. 37 Supply only 5mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each paneall as specified and directed by Engr-in-Charge 38 Supply only 5mm thick Froasted glass in squares n exc 0.5 sq. m each pane all as specified and directed by Engr-in-Charge 39 Supply only5mm thickTinted Coloured glass fixed to metal frame complete all as specified and directed. 40 Supply and fixinging Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed 41 Supply and fixinginganodized aluminium grill with power coating (minimumthickness 50 micron) of approved pattern and fixed to the existing window/ventilatorframe with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening sizefor fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement & directed by Engr-in-Charge. 42 Supply and fixinging in repair DOOR SEAL BOTTOM, DOOR AIR GAP RUBBER SHIELD (Best Quality) Anti Rust , Brown/white/balck colour, Black Rubber Complete all as specified Make : Sealplus or Equivalent 43 Taking down cement plaster or other existing treatment from sunken floors, cleaning the surface with wire brushes, brooms etc and finally washing down the area to be treated. Material and labour for for treating the sunken floors and adjoining vertical surfaces as under: (a) Plastering 15 mm in CM 1:3 mixed with liquid type water proofing compound to sunken floors and adjoining vertical surfaces. Surface shall be cured & allowed to dry.(b) Applying Ist layer of cement slurry by brush@ 0.488 Kg per Sqm mixed with acrylic based polymer modified cementeous compound of Adhesive@ 0.253 Kg per Sqm complete as per manufacture instructions.(c) Applying 2nd layer of cement slurry by brush@ 0.488 Kg per Sqm mixed with acrylic based polymer modified cementeous compound of Adhesive @ 0.253 Kd per Sqm complete as per manufacture instructions. (c) Testing the sunken floor for water tightness by ponding water for 72 Hours. (d) Fixing of 32mm dia GI pipe medium grade spout projecting 43 cm beyond wall, one number in each sunken portion. complete all as specified and directed . 44 Supply and fixinging 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including removing the old pipes and making good the disturbed surface as per existing complete all as specified & directed. 45 Supply and fixinging 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/under floor including removing the old pipes and making good the disturbed surface as per existing complete all as specified & directed. 46 Supply and fixinging in repair80 mm bore PVC (SWR) single junction (single T ) equal or unequalprovided with access door complete all as specified. 47 Supply and fixinging in repair 80mm bore PVC (SWR) bends any radius complete all as specified. 48 Supply and fixingingPVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls/spout pipes including removing the old pipes and making good the disturbed surface as per existing complete all as specified & directed. 49 Supply and fixinging PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches/under floor including removing the old pipes and making good the disturbed surface as per existing complete all as specified & directed. 50 Supply and fixinging in repair 110 mm bore PVC (SWR) bends any radius complete all as specified. 51 Supply and fixinging in repair 110 mm bore PVC (SWR) vent cowl complete all as specified. 52 Supply and fixinging in repair 110 mm bore PVC (SWR) single junction (single T ) equal or unequalprovided with access door complete all as specified. 53 Supply and fixinging in repairs CI spun pipe 75 mm bore fixed to walls or laid in floors complete including jointing all as specified. 54 Supply and fixinging in repairs CI spun pipe 100 mm bore fixed to walls or laid in floors complete including jointing all as specified. 55 Supply and fixinging in repairs CI junction for 100mm bore CI pipe including jointingcomplete all as specified and directed . 56 Supply and fixinging in repairs CI junction for 75mm bore CI pipe including jointing complete all as specified and directed . 57 Supply and fixinging CI bend for 100mm pipe including jointing complete all as specified. 58 Supply and fixinging CI bend for 75mm pipe including jointing complete all as specified. 59 Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed . 60 Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed . 61 Supply and fixinging galvanised iron tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge. 62 Supply and fixinging galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge. 63 Supply and fixinging as in repairvitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. 64 Supply and fixinging as in repair vitreous china squatting pan of orrisa pattern long pan size 580mm white (ISI marked) with P or S trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed. 65 Supply and fixinging in repairs vitreous china wash basin white, flat back, size 550x400mm including pillar tap brass CP 15mm bore with long screwed shanks and fly nuts waste coupling brass CP 32mm bore, flange end bedded in red lead cement and other end fixed and PVC connection 450mm long 15mm bore with 2 Nos nuts and washes CI brackets complete all as specified and directed. 66 Supply and fixinging in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete all as specified and directed. 67 Supply and fixinging in repairs PVC connection of 15mm bore with2 Nos. PTMT nuts, 60m long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. 68 Supply and fixinging in repair towel rails of 20mm dia tubular brass chromium plated 60cm long D type fixed to all as directed by Engr-in-charge. 69 Supply and fixinging in repairs MS grating CP 100mm dia, with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed. 70 Supply and fixinging in repairs brass chromium plated shower rose 125mmx125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified. 71 Supply and fixinging in repairs looking mirror 600x450mm bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washeres and as directed. 72 Supply and fixinging in repair15 mm fancy type, chromium plated, bib tap cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by the Engineer-in-Charge. 73 Supply and fixinging in repair 15 mm fancy type angle valves, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed by Engr-in-Charge. 74 Supply and fixinging in repair15 mm Angle Stop valves, cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unionssuitable for 15 mm bore tubes, complete all as specified. 75 Supply and fixinging in repair 20mm bore Stop valves, cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions fixedcomplete all as specified. 76 Supply and fixingingin repair chromium plated Brasshealth faucet for EWC with including PVC Connection 1m long suitable for 15mm borewith all connected fittings complete all as specified. 77 Supply and fixinging32/40mm dia PVC flexible waste pipe 80cm long withsocket for union, for WHB/urinal/sink complete all as specified. 78 Supply and fixinging in repairs ofsize 600mm x 100mm with SS railing glassshelf rectangular typecomplete all as specified & as directed. 79 Supply and fixinging in repairs of 300 mm dia with SS railing glass corner shelf complete all as specified & as directed. 80 Supply and fixinging in repair 15 mm2-in-1 CP bib cock complete all as specified and directed by Engr-in-Charge. 81 Supply and fixinging in repair 15 mm 2 wayCP angle cock completeall as specified and directed by Engr-in-Charge. 82 Supply and fixinging in repair Brass CP Soap Dispenser with Glass Bottle complete all as specified. 83 Dismantling water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified & directed by Engr-in-Charge. 84 Supply and fixinging 500 Litre capacity Rotational moulded polyethylene water storage tanks Triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc.complete as specified. 85 Supply and fixinging ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm diacomplete all as specified & directed by Engr-in-Charge 86 Supply and fixinging Mirror Cabinet PVC frame of size 400x500mm fixed to wall with rawl plug & stainless steel suitable size scrweds complete all as specified and directed. 87 Dismentling floor , hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 88 Material and labour for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as inlevelling coarse for tiles complete all as specified and directed. 89 Material and labour for 100 mm thick PCC 1:4:8 type D -2 using 40 mm graded stone aggregate as in sub basecomplete all as specified& directed by Engr-in-Charge. 90 Material and labour for for double charged vitrified ceramic tiles 8mm to 9mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. 91 Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. 92 Material and labour for for double charge vitrified ceramic tiles8 to 9mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed. 93 Material and labour for Glazed ceramic coloured tiles in vertical surface450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge. 94 Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeincl 15mm thick screed bed in CM 1:4 complete all as specified and directed. 95 Material and labour for machine cut kota stone slab flooring 20mm - 25mm thick (size not less than 550mm x 550mm) as in flooring, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish laid over & including screed bed / bedding layer of 15mm thick in cement mortar 1:4, complete all as specified & directed 96 Material and labour for machine cut kota stone slab 20mm - 25mm thick (size compatible to floor) as in vertical surfaces (skirting, dado, riser, steps), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish laid over & including rendering plaster or backing coat of 15mm thick cement mortar 1:4, complete all as specified & directed. 97 Demolition of cement concrete (un-renforced) in ground floor and paving. exc. 15 cm thickness(below or above ground level.) & removal of rubbish material complete all as directed by Engineer-in-charge and all as specified. 98 Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed. 99 Material and labour for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as inplinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. 100 Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of)etcin all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge. 101 Material and labour for screed laid 10mm thick in CM 1:4with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified& directed by Engr-in-Charge. 102 Supply only integral liquid water proofing compound (ISI marked). 103 Material and labour for Atactic Polypropylene (APP) polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.0 kg per sqm, black finish reinforced with non-woven polyster matt (Weight not less than 150 gram per Sqm), with properties of high penetration and centre core consisting of 90 micron, high molecular high density polyethylene (HMHDPE) film consisting of five layers with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 litre per Sqm, torching over laps with a propane orbutane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per Sqm below APP including applying one coat of heat repellant bitumen aluminum paint @ 0.10 litre per sqm on top of the treated surface of roof complete all as specified & directed .Notes: (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing.(ii) Contractor shall submit Security deposit as a guarantee against Water proofing treatment as specified. 104 Material and labour for providing cement concrete intype B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in roof padding,laid to(consolidated thickness 65mm or less) as leveling course, laid and compacted inmin slope 1:30 over roof complete all as specified& directed by Engr-in-Charge. 105 DismantlingPlain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. 106 Material and labour for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed. 107 Material and labour for for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in-Charge. 108 Material and labour for for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed by Engr-in-Charge. 109 Supply and fixinging in repairs brass chromiumfor 2 in 1 wall mixer & screwed down for iron pipe of 15mm bore all as specified and as directed. 110 Demolition and breaking up drain pipes 150 mm dia (salt glazed ware AC or reinforcement concrete set in cement mortar. 111 Material and labour for 150 mm Salt glazed stonware pipelaid and jointed complete with collars complete all as specified and directed by Engr-in-Charge. 112 Material and labour for 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed by Engr-in-Charge. 113 Material and labour for for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed by Engr-in-Charge. 114 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose soil complete all as specified and directed by Engr-in-Charge. 115 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m but not exc 3.00 m in depth and getting out soft/ loose soil complete all as specified and directed by Engr-in-Charge. 116 Material and labour for cement conc. 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified. 117 Returning, filling in, including spreading, levlling ,watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer-in-Charge. 118 Removing surplus excavated material to a distance exc 250m but n.exc 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge. 119 Material and labour for for 150mm dia Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engr-in-Charge. 120 Demolition ofreinforced cement concrete as in cover/slab of drain/culvert/septic tank/soakage wellall a specified & directed by Engineer-in-Charge. 121 Material and labour for for precast RCC 1:2:4type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed.Note :- Reinforcement shall be measured and paid for separately. 122 Material and labour for Mild steelTMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to TMT bar complete all as specified and directed by Engr-in-Charge. 123 Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators,socket outlet but excludingtube light fittings, calling bell etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etccomplete all as specified and as directed by the Engineer-in-Charge. 124 Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 25 mm dia with accessories, concealed on wall surfaces and on surface on ceiling surfacesand incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new covered plate over sunken box for housing themodular switches , modular socket outlets,modularfan regulators etc. and making smooth the disturbed surfaces as per existingfor one light/fan/exhaust fan point controlledby one way switch,complete all as specified and as directedby Engineer-in-Charge. Note :-a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid forseparately . 125 Description same all as per item No. 124here-in-abovebut for One 3 pin, 5 Amps, socket outlet controlled by one switch on independent board,complete all as specified and as directedby Engineer-in-Charge. 126 Description same allas per item No.124 here-in-abovebut for One 3 pin 5 Amps socket outlet controlled by one switch on same board,complete all as specified and as directedby Engineer-in-Charge. 127 Description same allas per item No.124 here-in-abovebut for bell/buzzer point,controlled by one bell switch complete all as specified and as directedby Engineer-in-Charge. 128 Description same allas per item No.124 here-in-abovebut for two way point,controlled by two way switch complete all as specified and as directedby Engineer-in-Charge. 129 Description same all as per srl item No 124 here-in-before but for one socket outlet 15 Amp with 2.5 sqmm PVC insulated, unsheathedcable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.5 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copperwire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge. 130 Supply and fixingmodular socket outlet2/3 pin, 6 Amp, one way, two module, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. 131 Supply and fixingmodular socket outlet2/3 pin, 16 Amp, one way, two module, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. 132 Supply and fixing modular switch 1 module, single pole, one way 6 Amps flush type, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. 133 Supply and fixing modular switch 1 module, single pole, one way 16 Amps flush type, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. 134 Supply and fixingmodular bell push 6 Amp, one way, one module, 230 voltscomplete all as specified and as directed by the Engineer-in-Charge. 135 Supply and fixingmodular switch 1 module, single pole, two way 6 Amps flush type, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. 136 Supply and fixingcalling bell ding dong 230 voltcomplete all as specified and as directed by the Engr-in-charge. 137 Supply and fixinglamp holder, PVC/polycarbonate type, with back plate for angular batten fittings complete all as specified and as directed by the Engineer-in-Charge. 138 Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminalcomplete all as specified and as directedby Engineer-in-Charge. 139 Supply & layingsub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI markedmulti stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall and surface on ceiling in PVC conduit medium gradeISI marked of adequate size for housing the wirescomplete including taking down old sub main wiring all as specified. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.(ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. 140 Supply & layingsub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI markedmulti stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall and surface on ceiling in PVC conduit medium gradeISI marked of adequate size for housing the wirescomplete including taking down old sub main wiring all as specified. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.(ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. 141 Supply and fixing sheet metal MCB DBs 12 way with 200 Amps rated bus bar single pole and neutralIP-43 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surface after removing old Unserviceable MCB DB complete all as specified and as directed by the Engineer-in-Charge. 142 Supply and fix sheet metal enclosureVertical triple pole & neutral (VTPN) with TPN MCCB 100 Amp for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and includinglugs/thimbles duly crimped for connection, necessary PCC work and making smooth the disturbedcomplete all as specified and as directed by the Engineer-in-Charge. 143 Supply and fixing MCB single pole, 240 volt, 6 to 32 amps, 10 KA C curvecomplete all as specified and as directedby Engineer-in-Charge. 144 Supply and fixing MCB SPN, 240 volt, 6 to 40 amps, 12 KA C curvecomplete all as specified and as directedby Engineer-in-Charge. 145 Supply and fixing electronic Fan step regulator modular 110 watt, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed by the Engineer-in-Charge. 146 Supply and fixing modular blanking plate, 1 module complete all as specified and as directed by the Engineer-in-Charge. 147 Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised iron wireearth lead of 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron, earth wire protected by GI pipe 15mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion . 148 Supply and fixingearth continuity conductor nor main earthing lead of 4.00 mm galvanised iron wire, burried in ground or fixed on wall in and including 15 mm bore GI pipe medium grade fro protection of earth wire complete all as specified and as directed by the Engineer-in-Charge. 149 Supply and fixingLED surface mounted bulk head luminaries 1x8-10 W with min 800 lumen, industrial model, IP 65, Aluminum housing, surge protection including driver & LED lampetc complete with all accessories connecting with three core copper conductor flexible cablefrom ceiling rose to connector of the lightas in repair complete all as specified and as directed by the Engineer-in-Charge. 150 Supply and fixing indoor decorative LED tube light fitting Batten type 1x18/20 Wwith opal diffuser, high efficient aluminium housing body in CRCA body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz and including 1x18/20 W LED tube rod luminaries (Warm/Cool as per site requirement) environment friendly, high efficient, T8 with aluminium extrusion heat sinkconnecting with copper conductor flexible cablefrom ceiling rose to connector of the lightcomplete all as specified and as directed by the Engineer-in-Charge. 151 Supply and fixing LED batten fitting 10-12 watt, 2 feet, 6500Kaluminium housing and integrated electronic driver including tube rod cool/warm typeindustrial model completeconnecting with copper conductor flexible cablefrom ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. 152 Supply & fixing single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA C curve as in repair complete all as specified and as directed by the Engr-in-charge. 153 S&F designer wall bracket having wooden base of brown colour and V shape designer glass matching with wooden basealongwith9 watt LED bulb with B-22 base as in repair complete all as specified and as directed by the Engineer-in-Charge. 154 Supply and fixingPVC, round shape junction box cover of suitable sizecomplete all as specified and as directed by the Engineer-in-Charge. 155 Taking down old UNSV DBs including old MCB/MCCBs of any size from any locationcomplete all as specified and as directed by the Engineer-in-Charge. 156 Supply and fixing plastic body ventilation fan 250 mm sweep, 1250 RPM, 50HZ,240 volts complete with cooper wound motor including all fixing accessories and including making the electrical connection by using three core wire with colour code complete all as specified and as directedby Engineer-in-Charge. 157 Shifting of existing electric energy meter with box to other location as directed complete all as specified and as directedby Engineer-in-Charge. 158 Supply and fixing Energy meter box, flame retardant, polycarbonate body including all fixing arrangenment like DIN rails, mounting plate, connection boxes, fastning screw protection plate etc. suitable to accomodate single phase energy meter with locking arrangementcomplete all as specified and directed. 159 Supply and fixing 09 watt LED bulb with B22 base cap, 1200 lumens, colour rating index 80, colour, temp F 6500K, startup time less that 2 second, in built surge 3.0 kv, voltage range 140V to 270V, lamp life 15000 hours complete all as specified and as directed. 160 Supply and fixing as in replacement, enviorment freindly,indoor decorative LED polycarbonate body, tube light fitting Batten type, 5/6 Wwith opal diffuser, operating voltage range 14 V to 270 V, driver effciency 88%, lumen effceincy = 100 Im/watt, THD≤80, colour temperature 6500 K, inbuilt surge protection = 2.5 KV, isolation = 3.75 and with zero merucry content including all accessariesall as specified and directed as directed by the Engineer-in-Charge. 161 Supply and fix exhaust fan 300 mm sweep, anti corrsive metal body, sturdy metal bird guard copper wounded, double ball bearing, five star rating,1320 RPM,50HZ, 240 volts complete with dynamically balanced blade for vibration free rotation, split pin, clamp and fixing at site on and includingMS fabricated base frame using flexible wire after making hole in wall as required at site andmaking goodthe disturbed surfaces and including making the electrical connection by using three core wire with colour code complete all as specified and as directedby Engineer-in-Charge. 162 Supply & fixing electric water heater(Geyser), storage type, steel body with copper inner tank, heating element of 2KW, storage capacity 25 litre, electrically operated, BEE 5 Star rated with all accessories such as safety valve, thermostate, NRV, SS connection pipe, temperature control knob etc. including fixing lugs, bolts etc and installation on location by drilling holes and plug to fastners by bolts and rawl plug, including making connection with3 core flexible copper wire of size 2.5 Sqmm from geyserto metal plug & socket complete all as specified & directed. 163 Supply and fixing ceiling fan 1200 mm sweep, 240 volts complete with blades, down rod, electronic regulator and all accessories, having minimum air delivery 210 CFM, BEE five star rates with brushless direct current motor (BLDC) complete including making the electrical connection by using three core wire with colour code complete all as specified and as directedby Engineer-in-Charge. 164 Taking down Ceiling fan/Exhaust fan/Geyser by disconnecting electric connection, and deposited to MES store yard before execution of work and refixing the same after completion of B/R repair after cleaning all dust etc.complete all as specified and as directed by the Engineer-in-Charge. 165 Taking down LT panel by disconnecting cable and sub main wiring properly complete all as specified and directed.Note : Meter shall be deposited in MES store yard. 166 Supply and fixing as in replacement metel flush box 4 module complete all as specified and directed. 167 Supply and fixing as in replacement metel flush box 6 module complete all as specified and directed. 168 Supply and fixing as in replacement white cover plate with frame suitable for 4 module box complete all as specified and directed. 169 Supply and fixing as in replacement white cover plate with frame suitable for 6 module box complete all as specified and directed. 170 Supply and fixing MCCB, 3 pole, 415 volts, adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed. 171 For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted in total quoted amount of BOQ to arrive contract sum.
Contract Date: Feb 06, 2026 Contract Value : 57.86 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttar Pradesh View Result →
48.
Defence #9393011 AOC
Tender For Special Repair To Bldg No T-57, Drainage Sys (Approx 200Rm), Internal Road And Certain Misc Works Under Ge Jhansi; 1 Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed. 2 M&L for 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and directed. 3 M&L for 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed.(Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.) 4 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. 5 M&L for Non skid ceramic colored tiles , 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqmas in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. 6 M&L for ceramic colour tiles in vertical surface of size 350 X 250 x 7/450x300x7 mm thick, , set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed. 7 M&L forNon-skid colour ceramic tile tiles8 to 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:6 over brushing neat cement slurry @ 3Kg/sqmetc complete all as speciefied and directed. 8 All as per item here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering (backing coat) in CM 1:4,complete all as specified and as directed. 9 Dismantling stone slabs and tiles of any description or thickness laid , bedded and pointed in any mortaras in floors, aprons etc. complete all as specified and directed. 10 M&L for factory made machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, , complete all as specified and directed. 11 M & L for machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10 mm thick backing coatin CM 1:4 complete all as specified and directed.Note: Kota stone in Step will be placed in single piece with groove lines at edge. 12 M&L 18-20 mm thick granite slab of any type , tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:3) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed. 13 Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed. 14 M& L for clean sawn 2nd class hard timber scantling in truss work , frame work etc, fixed with U hook with Nut bolt complete all as specified and dirceted. 15 M & L18/19 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including dismantling of old boarding, cupborad any description, fixed in any position including fittings, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately) 16 M & L25 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws,including dismantling of old boarding, cupborad any description, fixed in any position including fittings , all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately) 17 Providing and fixing 2mm thick 18 to 25 mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. 18 S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed 19 S & F drawer/shutter handles, projection drop (50mm to 65mm) on screwed platey complete all as specified and directed 20 Supply & Fixstainless steel magnetic catcher fancy type for kitchen cabinet / drawer complete all as specified and directed by Engineer-in-Charge. 21 Demolition of brick work built in cement mortar or lime mortar including all quoins, arches, pillars etc complete all as specified and directed. 22 M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. 23 M&L for brick work with old size burnt bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. 24 M&L for10 mm rendering thick in CM (1:6) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed. 25 M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC ) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed. Notes: WPC in 5 mm thick 2nd layerplaster measured and paid separately. 26 M&L for10 mm rendering thick in CM (1:6) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed. 27 M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note: WPC in 5 mm thick 2nd layer plaster measured and paid separately. 28 M&L for5 mm rendering thick in CM (1:3) on fair faces of concrete surfaces in ceiling finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed. 29 M&L for preparation of new plastered of wall surface and applying two coats of oil bound distemper, over a coat of chalk whitening primerover and incl a layer 3mm thick of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. 30 M&L forpreparation of surfaces of wallsand applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof)of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturers drums with seal intact. 31 M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceiling all as specified and directed. 32 M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitening primer, over a layer of (JK/Birla) 3.0 mm thick wall care putty to get smooth and level finish, complete all as specified and directed. 33 M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand paper rubbing and finally washing with wateringand applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof)of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturers drums with seal intact. 34 M&L for preparation of newly plastered surfaces surfaces of wall and applying two coats of white wash on wall all as specified and directed. 35 Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. 36 All as per item here-in-above but not exc 1.5 sqm each 37 Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed. 38 S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. 39 S & F Solid PVC Door Frame single side prelaminated pvc sheet or plain colour pvc sheet & edges willbe painte to match with printed sheetof size 50mm x 47mm made out of 5mm thick prelaminatedcolour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. 40 S&F Factory made single 35 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. 41 M&L 30mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fie again of the shall be as per manufacture instruction complete all as specified and complete all as specified and complete all as specified and directed. 42 S &F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelaminatedcolour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. 43 Supply and fixing of powder coated (Min thickness of powder coating 50 micron) anodised aluminiumframe section of door, windows, ventilation, partion wall, cup board with one or more rebates including joinging cleats for fixing etc. complte all as specified. 44 Providing and fixing powder coated anodised aluminium window and ventilator shutters, hung/sliding type without sashbars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading,screws, anodised aluminium fittingssuch as peg stays 150 mm long (1 No.) hinges type B-21 100 mm long (2 nos.) suitable handle (1 no.) etc all as specified and directed . 45 S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work fixed with holdfast or fastener if required conforming to Fe.290.Gde-E-165 complete all as specified and as directed. 46 Supply only 4.0 mm thick selected quality sheet glass plain/figured in squares n exc 0.50 sqm each pane complete all as pecified and directed. 47 S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed 48 S&F of aluminium alloy anodized sliding door bolt 300mm (aldrop bolt) length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all specified and directed 49 S&F of 125 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21anodized complete all specified and directed 50 S&F of 100 mm size butt hinges,extruded brass, with mild steel hinge pin, bright polishedand fixed, type B-11 complete all specified and directed 51 S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. 52 S&F of 150mm aluminum handle cast type anodized complete all specified and directed. 53 S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed 54 S&F of 140 mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed. 55 S&F Rubber bush (door seal) of 25mm wide fixedto door complete all as specified and directed 56 S & F in repair stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed. 57 S&F of ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. 58 S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors,including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. 59 S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and patterncomplete all as specified and directed. 60 S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. 61 S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. 62 S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. 63 S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed. 64 S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed. 65 S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed. 66 M & L for PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and directed. 67 S & F 15 mm bore Galvanized Steel tubes, medium gradefixed to walls and ceilings or laid in floors, concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed 68 S & F 20 mm bore Galvanized Steel tubes, medium gradefixed to walls and ceilings or laid in floors,concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed 69 M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed. 70 S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed. 71 S&F in repair20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. 72 S&F in repair20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. 73 S&F in repair 600x450mm size and 4mm thick beveled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and directed. 74 S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure,with long screwed shanks and fly-nuts, complete all specified and directed. 75 S&F in replacement of stop cock/anglecock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as specified and directed. 76 S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swivel type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type,complete all specified and directed. 77 S&F in replacement of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated,complete all specified and directed. 78 S&F in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all specified and directed. 79 S&F in repair SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all specified and directed. 80 S&F in replacement of towel rail 600 mm long D type between flange and wall bracket made of cast copper alloy, chromium plated, complete all specified and directed. 81 S&F in replacement of Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as directed. 82 S&F in replacement of PVC waste pipe 32 mm dia 750 mm long with for wash hand basin or for kitchen sink, complete all as specified and directed. 83 S&F in replacement of PVC connection 600 x 15mm dia PTMT (PVC), complete all as directed. 84 S&F in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed. 85 S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe, P Trap and connecting conebut exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed. 86 S&F in replacement of 1st quality vitreous china ware European type WC with P or S type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as directed. 87 S&F in replacement of 1st quality vitreous china wash hand basin, white flat/angle back or oval shape for countertype, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size,complete all as specified and directed. 88 S&F in replacement of corner glass shelf 300 mm with Chromium plated bracket guard and railing and fixing accessories, complete all as directed. 89 Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova 80 to 100mm thick mud phuska/cement concrete/lime coba /brick layer etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed. 90 M&L of water proofing treatment to non-accessibleroof slabwith APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3kg/Sqm as per manufacturer’s instructions laidwith torch application complete all as specified and directed by Engineer-in-Charge with following course of description below:-(a) 10 mm thick plaster in CM 1:4 with WPC (liquid water proofing compound @ 0.20 Ltr/bags(50 Kg Bag))will be applied over the roof slab (subjected to condition as mentioned in notes) . After the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/sqcm using cement based grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment. 91 (b) the surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimney stacks, etc. and other similar situation to ease up about corners.(c) Bitumious based primer confiorming to IS: 3384 @ 0.3 kg/Sqm to be applied on prepared surface, till the surface is propely impregnated. (d) After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturers instruction. The overlap while toching shall be 100mm in longitudinal direction and 100 mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer.(e) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.(f) after apllication of APP membrane one coat of aluminium paint @ 0.20 Kg/Sqm over APP membrance will be applied Note :The cost of all items i.e. from Sr No. (a) to Sr No.(f) are included in quoted rate and no separate payment will be done for the above except liquid WPC. 92 M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as inroof kerbs,tank staging etc complete all as specified and directed. 93 Supply only integral liquid water proofing compound LW++, mixed in CM as per manufacturer instruction,complete all as specified and directed. 94 Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of GI Pipe and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge. 95 Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in dedpth and getting out hard/dense soil complete all as specified and directed 96 Excavation in trenches in any type of soil n exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out excavated soil complete all as specified and directed. 97 M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm and getting in loose soil all as specified as directed. 98 M&L of removing excavated material nexc.50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as well as specified 99 M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bond stones, bed plates for hold fast and the like including weathering, slightly rounded or chamfered angles and throating,complete all as specified and directed. 100 M&L for reinforced concrete pipe Class NP-2, 150mm dia with coller laid jointed with CM 1:3incl breaking up any types of pipes complete all as specified and directed. 101 M&L for PCC 1:3:6 type C2 as in concrete bed to 150 mm bore drain pipe and over incl packing under haunching against the sides of pipes after pipe laid and tested complete all as specified & as directed. 102 S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. 103 S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. 104 M&L for structural steel Fe-410-W(Gde-E-250) quality A for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed. 105 S&F in repair the exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5 mm dia GI wire from roof/Slab/truss including wall/perimeter runner/channel of 15 mm size with and including 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm duly fixed in ceiling frame work complete all as specified and directed. 106 M & L in repairfor two coat of synthetic enamel paint over one coat of red oxide, zinc chromiume on steel surface including preparation of new steel surface width or girth exc 10cm all as specified and directed. 107 S&F in repair 5 mm thick beveled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and directed. 108 M&L for cement concrete in foundation, filling and mass concrete type D2 1:4:8(using 40 mm graded stone aggregate), complete all as specified and directed. 109 M&L for cement concrete insurface channels anddrains type B11:2:4(using 20 mm graded stone aggregate), complete all as specified and directed. 110 M&L forrendering 10 mm thickon fair faces of brick work orconcrete surfaces in CM 1:4finishing surface even and smooth (withoutusing extra cement), complete all as specified and directed. 111 M&L for forming fair finished drain or channel over 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed. 112 M&L for cement concrete type C1,1:3:6 (using 20 mm graded stone aggregates) as in roof kerbs or stops, lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. 113 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. but excluding Fan & Geysers and removing materials to storefor taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. 114 M&L for point wiring for modular fittings complete with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of modular cover plates with frames and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly all as specified and directed by Enrg-in-charge. (Note- rates of chasing/cutting & making goods shall be included in the unit rate) :- 115 One light point/ceiling fan/exhaust fan controlled by one switch 116 One 6A socket point controlled by one switch on independent board 117 One 6A socket point controlled by one switch on same board 118 All as per srl item No 113 here-in-before but with 2.5 sq mmFRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socketpoint controlled by one 16 Amp switchon independent board. 119 Taking down submain wiring of any size any type and in any position metalic/non metallic PVCconduit of wooden batten complete all as specified and directed. 120 M&L for submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit ISI Markedconforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc and directed by Engineer-in-Charge.Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length 121 All as per srl item No 116 here-in-before but2 runs X 4 Sqmm + 1 run X 4 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length 122 All as per srl item No 116 here-in-before but2 runs X 2.5 Sqmm + 1 run X 2.5 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length 123 S&F of Modularswitch1way6A,1 module 240V, 50Hz complete all as specified and directed. 124 S&F Fan step regulator, 120W - 2 module, 240V, 50Hz ISI marked with valid CML complete all as specified and directed. 125 S&F of Modular Socket,6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed. 126 S&F of Modularswitch1way16A,1 module 240V, 50Hz complete all as specified and directed. 127 S&F of Modular Socket6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed. 128 S&FCeiling rose, three terminals, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and directed. 129 Taking down light fitting of any capacity and any sizeand in any position complete all as specified and directed. 130 S&F decorative Stylo wall light of color Opal white PC Diffuser for Glare Free Light up to 14 Watt white LED retrofit lamp suitable for B-22 holder base with polycarbonate mounting on wall bracket IP 20 complete etc. 131 Supply and fixVentilataing fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50HZ, RPM 1200, Copper winding of sweep 250 mm including connection with 1.5 sqmm, three core copper wire from ceiling rose to exhaust fan upto 1 mtr length including fixing on ventilator complete all as specified and directed by Engr-In-Charge. 132 S&F LED Tube light fitting batten type 20W, 230W, efficiency 120 Lumens per watt, colour temperature6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP 20, THDv with in 5 % and THDi (8-10%) and integrated Electronic driver complete with al accessories internally Pre-wired and including connecting with 3 Core twisted flexible copper conductor cable of suitable size from celling rose all as specified and directed.Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. 133 Supply and fix in replacement of LED bulkhead luminaire 10W in die-cast aluminium alloy/ PVC body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 55 degree of protection complete all as specified and directed by Engineer-in-Charge. 134 Supply and fixLED building security light fitting 35 watts, Luman efficacy of LED 140 lm/W, PF>0.95 THD<10%, colour temperature 6500K CRI > 7, system luman not less then 2600 lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 65 protection and impact resistant of IK 07 etc and all accessories previewed complete including mounting bracket of GI Pipe 40mm inner dia light grade of reqd length and shape including bending, forging or welding etc and suitable bolts and nuts with washers, including connecting with PVC insulated multistandered cooper flexible cable of size 0.5sqmm 3 core form celling rose to fitting all as specified and directed. Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. 135 Supply and fix electric water heater, storage type steel body with Strainless Steel inner tank and heating element upto 2 KW Capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. 136 S&F of ceiling fans complete with blades, down rods, (with remote) and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value more than 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engineer-in-Charge. 137 Supply and fixof modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket boardall as specified and directed. 138 Taking down unserviceable VTPN/ TPN DB with MCBs of any make/ capacity complete all as specified and directed by Engr-in-Charge. 139 S&F of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surfacecomplete all as specified and directed.Note: MCCB / MCBs shall be measured and paid separately. 140 Taking down unserviceavle Sheet metal box & MCB DB SPN with MCBs of any make/capacity complete all as specified and directed by Engr-in-Charge. 141 Supply and fixof MCB distribution board, SPN, 8 way, 230 V, 1 phase, AC with MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. 142 Supply and fixof MCB distribution board, SPN, 4 way, 230 V, 1 phase, AC with MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. 143 S&F of MCCB, 63A, 16 KA, 4 Pole 415 V, 50 Hz with fixed thermal magnetic release complete all as specified and directed. 144 S&F MCB TPN 63 Amps, 10 KA, C Curve, 415 V, 50 Hz complete all as specified and directed. 145 S&F MCB SPN 40-63 Amps, 10 KA, C Curve, 230 V, 50 Hz complete as specified and directed. 146 S&F MCB SP 6 to 32 Amps, 230 V complete all as specified and directed. 147 Taking down old unserviceable of LT cable of any size complete all as specified and directed by Engr-in-Charge. 148 Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 16 sq mm 4 core ISI Marked as per IS 7098(Part 1) including connecting on LT panel based with suitable lugs, glands etc complete all as specified and directed. 149 Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 16 sq mm nominal cross section , 2 core in service connections as per IS 7098 (Part 1) including connecting on LT OH line / LT panel ? DB with suitable lugs, glands, binding wire etc. 150 Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. 151 M&L for earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connecting to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electrical plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed included taking down existing earthing complete.Note :- (i) The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh, protection pipe, earth wire up to 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. (ii)Contract must ensure earthing test result less than 5 Ohm and submitted test report to Engr-in-Charge. 152 Provision of composite rain water harvesting system including construction of underground water storage tank of 6000 Ltrcapacity built in brick masonry with following units(i) First flush system 01 Set(ii) Gravity Filter 01 PC(iii) Delivery pipes 25mm size -15 mtr (iv) Down take pipes 100mm size -15 mtr 153 Supply,laying and testing,galvanised iron pipe medium grade 25 mm diawith all fittings such as tee,bends,elbow,sockets, reducer,union etc of midium grade ISI marked fixed to walls/floorsceling in trenches including grove cutting for concealed plumbing and making good the dameged surfaces complete for the following bore :- Make Jindal/TATA/Prakash 154 Supply and fixing in replacement cast iron sluice valves both ends flanged, confirming to IS – 14846 of 2000 duly ISI marked, PN-1.6 complete with stainless steel spindle and gun metal nut including making 2 Nos flanged joints and also providingrubber gasket for GI pipe of bore 80 mm 155 Material and labour for brick masonry valves pit chamber (in non expansive soil) 1050mmx1050mmx1050mm including necessary excavation, PCC foundation / floors /coping, brick work, plastering andMS sheet cover of6 mm thick including and locking arrangement with two coats of enamel paint over a coat of redoxide primer all as directed 156 Sypply and fixing submersible open well electric driven 415 V , TP suitable for 50 mm dia and installed complete upto 5 WHP inclusive of 30 mtrs long submersible cable and starter. 157 Supply and fixing of gun metal globe/gate valves 25 mm diawith iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 158 Digging of holes in ordinary soil and refilling the same with excavated earth mixed with manure or sludge in the ratio of 2:1 by volume(2 part of stacked volume of earth after reduction by 20%, 1 part of stacked volume of manure after reduction by 8%) flooding with water ,dressing including removal of rubbish and surplus earth if any with all leads and lifts (cost of manure sludge or extra good earth if needed to be paid for separately Holes 0.60 m dia and 0.60 m deep. 159 Supplying and stacking of cowdung manure at site including royalty and carriage with all leads and lifts (manure measured in stack will be reduced by 8% for payment) 160 Supplying Chemical emulation in sealed container including delivery as specified.Chloropyriphose emulsifiable concentrate of 20% E.C 161 S and F mild steel frammed work as in tree guards complete including febrication, welding , revetting etc. 162 Plantation of plant name -BOUGAINVILLEA Ht. 4 insize Poly bags 163 All as above but plant nameKachnar (Bauhinia Variegata) 4’ in size Poly bags 164 All as above but plant name - Kaner (Thevetia Peruviana) in 4 size Poly bags 165 All as above plant name- Gardania (Cap Jasmine) 4 size Poly bags 166 All as above plant name - Gurhal (Hibiscus rosasinensis) Poly bags 167 Maintenance of space (other than the area where plantation is done) byde weeding, Grass/clearance,uprooting of vegetation jungles etc all completely without disturbing existing plants and disposal of the same on the low laying area in proper way as per EIC instructions (the cost of consumable, tools etc to be arranged by the Contractor) 168 Repair to pot holes any depth, not exc 1.0 sqm each includingsweeping free from dust and mud, or water, scoring sunken surfaces in roads , paths etc. cutting around edges to at least 25mm in depth making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm blinded with 0.09 cum of stone, chippings, 6.3 mm size and again rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed. 169 M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqmusingpaving bitumen VG-10complete all as specified and directed. 170 M&L forprovidingbituminous premixed asphaltic semi dense concrete (design mix) 30mm consolidated thickness using paving bitumen VG-30 @ 5.5% binder content by weight of total mix, laid/spread uniformly by means of mechanical pavers over primed black top surfaces rolled and compacted to required camber and gradient using 10 to 12 tonne power roller, complete all as specified and directed complete all as specified and as directed. 171 M& L, Premix bituminous, macadam with 4% binder content by wt of total mix usingpaving bitumen (VG-30) any penetrationlaid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) ),as level correction. complete all as specified and as derected by Engr-in-Charge. 172 S&F in repair cat eye solarreflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and directed. 173 S&F in repair solar stud cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with10,000 to 18,000 mcd completed as per manufactures instructions etc, complete all as specified and directed. 174 M & L for preparing bituminous surfaces of road and marking 2.5mm thick center or edge line, stop lines, dashes, arrows, etc and the like n exc 10 cm wide hot applied thermo plastic road marking paint (reflective type ) of uniform finishing with machine conforming to BS 3262 (Part-I) 1989 read with most specification of 803 clause 4.2.1 and 4.2.2 on bituminous surface in white / yellow/ red colour and super imposed with glass slam beats conforming to BS 6088 and most specification 803 clause 4.3.3 including cleaning of surface by removing all dust dirt oil grease etc including removing of existing marking with spirit / kerosene / gas burner or mechanically on bituminous surface complete all as specified and directed. 175 M&L for 100mm thick (spread thickness) moorum/red bajri brought from out side MD land, filling in layers not exceeding 10cm thick, spread watered , rolled and consolidated with 8 to 12 tonne power roller to required camber and gradient, complete all as specified and directed.
Contract Date: Feb 06, 2026 Contract Value : 1.01 Crore
Statutory Bodies & Commissions/Committees No of Bidders 9
Uttar Pradesh View Result →
49.
Defence #9357145 AOC
Tender For Addition Alterations Towo Status Smqs At Af Stn High Ground.; 1 Building Works 2 Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, with and including make good the diturbed surface wit PCC 1:2:4 B0 and CM 1:4 to make the surface and edges finished to recive the window/door chowkhats complete all as specified and directed 3 Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, with and including make good the diturbed surface wit PCC 1:2:4 B0 and CM 1:4 to make the surface and edges finished to recive the window/door chowkhats complete all as specified and directed 4 Taking down shutters of any description having area exc. 1sqm but not exc. 2sqm each &refixing the same opening after easing & adjusting 5 Taking down shutters of any description having area exc. 1sqm but not exc. 2sqm each and removing from site all as specified. 6 Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 125mmx60mm, made out of 1.25mmthick sheet,including necessary fixing lugs, hinges, lock strike plate, with and including 25mmx 50mm MS tube 2mm thick stopper welded to chowkhat, and including cement concrete 1:2:4 (type B0) with 12.50 mm graded stone aggregate in backfilling of chowkhats etc, complete all as specified and directed. 7 Supply and fix, factory made pressed steel frames for doors with one or more rebates, of size 105mmx60mm, made out of 1.25mmthick sheet,including necessary fixing lugs, hinges, lock strike plate, with and including cement concrete 1:2:4 (type B0)with 12.50 mm graded stone aggregate in backfilling of chowkhats etc, complete all as specified and directed. 8 M&L for plain cement concrete (1:3:6), type C-1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts,filling in pressed steel door frames , benching slightly rounded or chamfered angles & throating etc including necessary use & waste of form work complete all as specified and directed. 9 S & F Factory made single rebated extruded WPC (Wood Polymer Composite) solid door/ window/ S & F Ceosetory windows & other Frames/Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete as per direction of Engineer-in-Charge. 10 Cutting holes in brick walls exc half brick but n exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required 11 S&F rolled mild steel Fe-290 (Ged E-165) framed work as in door or gate of angle or other section with gusset plate, rail, braces etc, Complete drilled for fixing of steel sheeting or other coverings, doors, etc to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails, guides) and hanging also fastering & fixing complete all as specified and directed. 12 S&F Mild steelplain black sheet 1.00mm thick but in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, cloutnails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required 13 Supply and fix, factory made flush shutters 35 mm thick,solid core construction with block board core and plywood face panels commercial type on both sides, duly provided with 6mm thick Teakwood leeping on edges alround, fitted to chowkats, complete all as specified & directed. 14 S&F factory made Second class hardwood glazed and skeleton door shutters on35mm thick, in three equal penals open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete, complete all as specified. 15 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain door shutter of size 30 MM thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 16 S&F in repair18/19 mm thick Prelaminated particle, board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete alll as specified 17 S&F Factorymadeboxtypesteelwindow with pintlehinges&2Nos150mmmildsteeltower boltstoeachshutter,steelhandleandwithout glazingbars,includingflatiron12x3mmfor securingwiremesh,dovetailedorweldedand withoneshopcoatofzinc chromateprimer complete all as specified and shown on Drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2. 18 S&F Factorymadeboxtypesteelwindow with pintlehinges&1Nos150mmmildsteeltower boltstoeachshutter,steelhandleandwith glazing bars,dovetailed or welded and with one shopcoatofzincchromateprimercompleteall asspecifiedandshownonDrawingNo CEAF/STD-185-2012 Sheets 1/2 & 2/2. 19 Mild steel framed work such as grills, gratings, etc with ends ofbars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed. 20 S&F spring for doors 300 mm mild steel ordinary rat tail rod pattern spring including roller & roller plate, complete all as specified and directed. 21 Supply and fixing, stainless steel wire mesh IN REPAIR , 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and directed. 22 Supply and fixing, stainless steel wire mesh, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and directed. 23 S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with wooden beads having area not exc, 0.50sqm in each pane all as specified. 24 Hacking out old broken glass from metal frame or wooden frames incl punching or drilling out oldglazing pins/spring clips of any area. 25 S&F 100mm stainless steel butt hinges, with stainles steel hinge pin & fixed to WPC 30 mm thickdoor using stainless steel screws complete all as specified & as directed. Make Prayag Cat part No-PHW-38 26 Supply and fixing double leggedfloor door stopper of over all length of cover plate 140 mmof aluminium alloy body and tongue anodizedwith hard drawn steel springfixed in floorall as specified 27 Supply and fixing IN REPAIR double leggedfloor door stopper of over all length of cover plate 140 mmof aluminium alloy body and tongue anodizedwith hard drawn steel springfixed in floorall as specified 28 S&F 100mm size Stainless steel Hasp and staple, safety type for shutter, with mild steel hinge pin including bolt to hinge plate and fixed with screws. 29 Supply and fix 150mm sizealuminium handle cast type pressed handle Ovel type ISI marked, complete all as specified and directed. 30 Supply and fix 100mm sizealuminium handle cast type pressed handle Ovel type ISI marked, complete all as specified and directed. 31 S&F, 100mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed. 32 S&F, 150mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed. 33 S&F, 200mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed. 34 S&F contineous (piano hinges, mild steel, with width of flaps30 mm when open, bright finish or electrogalvanised 35 S&F 300 mm long stainless steel Heavy duty, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, ISI marked, complete all as specified and directed by Engr in charge. 36 S&F Door seal strip with plastic beading suitable for doors of all widths, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. 37 M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified. 38 M&L for preparation of new surfaces ofsteel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 39 S&F MS Chroumium plated curtain rod 25 mm diawith and incl MS Chromium plated decorative round funnals on either end and provide a visually balanced appearance incl MS Chromium plated brackets fixed to wall with 30mm wooden steel screws and PVC rawal plug anchors and installation as fised in repairs complete all as specified. 40 M&L for Welding in repairs not exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as hand rails and windows etc., complete all as specified and as directed. 41 M&L Brickwork with sub class Bbricks (EXCEPT BRICKS), straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), using old size bricks, and including demolition etc complete all as specified. 42 M&L Brickwork with sub class Bbricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), using old size bricks, and including demolition etc complete all as specified. 43 M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces in ceiling (such aschajja,beams, roof projection, balcony, mumty and staircase flight ceiling, roof slab etc.) finished even and fair without using extra cement, complete all as specified and directed by Engineer - in -Charge.NoteThe rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building. 44 M&L preparation of new plastered surfaces of walls and apply two coats of water based acrylic distemper over a coat of primer incl wall care putty of interior grade upto 1mm thick wall care putty to smoothening the surface by using sand paper, complete all as specified and directed. 45 Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc of any description and any position, including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge. 46 M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and fair without using extra cement, complete all as specified as per directed (Internal plaster). 47 M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified (External plaster).Note:- The rate quoted by contractor is deemed to be included necessary scaffolding and form work upto 12Mtr height or (G+2) storey building. 48 Material & Labour for applying of new plaster external surface of wall Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over 1mm thick wall care putty of new plaster and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered of any description 12M upto G+2 building, including necessary scaffolding, complete all as specified and directed. Note: Weather proof exterior emulsion paint and primer shall be of same manufacturer. 49 Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge. 50 Demolition of cement concrete as in roof pading ,anythickness andany descrition upto RCC roof slab ,cleaning the surface including flashings and junction of parapers, etc with wire brushes and water to the entire satisfaction of Engineer -in -Charge including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge. 51 M& L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm gradedstone aggregate) in plinth protections, finished even andwithout using extra cement including forming of construction joint @ 2.5 meter Centre to centre & corner & filled with bitumen (80/25) and sand in ratio of 1:6 etc Complete all as specified and directed. 52 Demolition stone slabs and tiles of any description or thickness in floors/ dado, aprons etc., laid bedded and pointed in any mortar, complete all as specified and directed. 53 Demolition floor, health or wall tilling including cement mortar bedding (but not backing removing survicabletiles to store and rubbish including removing the debris from the site to a designated point by the civil administration complete all as specified and directed by Engineer-in-Charge. 54 M & L forglazed ceramiccoloured tiles 450 X 300 X 7 to 8 mm thick on vertical surfaces/dado skirting joint free, set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 10mm thick cement mortar as in backing coat of tile in cement mortar 1:4, Complete all as specified and directed . 55 M & L for Granite (of any type ) 16 to 18 mm thick, work (table rubbed and polished) fine grained Z black/red incooking platforms/Jambsincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in CM 1:4, complete all as specified. 56 M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. 57 M&L First quality, Non skid ceramic coloured tiles laid in floors, (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11Sq.m, 7-8 mm thick with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cemen0t with pigment to match the shade of tiles, complete all as specified and directed. 58 M&L First quality, Non skid ceramic coloured tiles laid in floors, joint free (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.38Sq.m, 8 to 10mm thick with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cemen0t with pigment to match the shade of tiles, complete all as specified and directed. 59 M/L Machine cut Pre-polished Kota stone slab flooring 18-20mmthick as in floor, treads of stairs case over 15mm thick cement screed of cement mortar 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab complete.Note : (Kota stonefixed in staircase tread shall besingle piece having 03 Nos of grooves in tread of stair case as directed by Engineer-in-Charge). 60 M/L Machine cut Pre-polished Kota stone slab 18-20mm thick as in vertical surface, riser of stairs case over 10mm thick cement screed of cement mortar 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of slabas in risers of steps, skirting, dado etc complete.Note : (Kota stone to be fixed in staircase Riser shall be of single piece) 61 Providing precast cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) as in landings cover slabs underbracket manholes, chullah hood, chajja, water trough, shelves and similar atrticles etc. (of any section indicated), with plain fair faces, includingchamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete all asspecified and as directed. 62 Demotion cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided any thickness and any length etc 63 M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. all asspecified and as directed. 64 Demolition Brick/PCC tiles or terracing tiles, single layer on roofs, etc compelete all as specified and Directed 65 Taking down existing bitumen feltroof treatment,chiseling existing bituminous coating , roughning the surface completely, cleaning and washing down with water to remove dust and rubbish off the premises to a distance exceeding 150 meter and not exceeding 250 meter complete all as specified. 66 Material & labour cutting out cracks to effected portion mechanically of minimum width 5mm and depth equal to width in existing RCC roof parapet or terracing, cleaning out and apply Dr Fixit PU sealant (Make : Pidilite or Equivalent of make specified herev in after) complete all as specified. 67 M&L forcement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregateas padding in rooflaid to maintain the slopeproviding leveling bench mark at ridge level and up to edges with distances as directed by Engineer in Charge. 68 Supply, laying and fixing 2mm thick FOSROC proofex ORG over minimum 200 GSM TPO (Thermoplastic Polyolefin) waterprofing membrance on prepared surfaces of roof and upto 300mm on parapets and cumple joints including junction of roof and parapet of make Geotextile or Asian Paint or any fully compatible material of makes specified here-in-after. Note :-The work of water proofing to roof and sunken portions shall be executed by the manufacturers authorized trained/skilled applicator as per technical guidelines issued by the manufacturer. A MOU is to be executed between the contractor and manufacturer and the same will be got approved from the GE/AGE (I) before commencment of work.The Contractor will arrange to provide company back guarantee for the water proofing work for the period specified here-in-after. 69 S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete including taking down old unseviceable all as specified and directed. 70 S&F steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors,including taking down old unseviceable complete all as specified. 71 S&F 110 mm bore PVC (SWR) pipes of pressure rating 6 kgf / cm2 with, single socketed in any length with rubber ring joints fixed to wallincluding holding holder /clamps and making good the mouth of rain water/drainage pipe including taking down as directed complete all as specified. 72 S&F 110 mm bore PVC (SWR) pipes of pressure rating 6 kgf / cm2 with, single socketed in any length with rubber ring joints fixed in floorincluding holding holder /clamps and making good the mouth of rain water/drainage pipe including taking down as directed complete all as specified. 73 S&F PVC (SWR) pipes 75mm dia of pressure rating 4 kgf / cm2 ofdouble socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. 74 S&F PVC (SWR) pipes 75mm diaof pressure rating 4 kgf / cm2 ofdouble socketed, in any length with rubber ring joints, fixed in floors complete all as specified and as directed. 75 S&FPVC (SWR) bends 110mm dia any radius provided with access doorall as specified and directed. 76 S&F in repair 110mm bore PVC (SWR) Bends (any radius), diminishing pieces or tapers (larger bore measured) ISI marked,complete all as specified and directed by Engineer-in- Charge. 77 S&FPVC (SWR) bends 75mm dia any radius provided with access door as specified and directed. 78 S&F PVC (SWR) junction single, (single T)110mm dia any radius provided with access doorall as specified and directed. 79 S&F 75mm PVC Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchesfor fix in WC and floor trap 80 S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. 81 S & F in repair PVC floor trap 75m dia with grating (with/without hole as reqd) incl jointing with solvent cement,complete. 82 S&F in repairPVC gully Trap 125mm setting and jointing with solvent cement 83 S&F for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. 84 S&F in repairs wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste (PTMT Coupling) fittings, brass, chromium plated with long screwed shanks and fly nuts, over and including new bracketscomplete all as specified and directed. 85 S&F in repairs VitreousChina wash down water closet with plastic seat cover (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including 100mm certifugal cast iron (Spun)P & Strap and 100mm centrifula cast iron (spun)sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete all as specified and directed. 86 S&F in repairs Health faucet (ABS Body) stainless steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. 87 S & F 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed. 88 S&F in repairs 2-Way Bib Cock Double Handle with Wall Flange cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete all as specified. Make - PrayagCat No. 6512 or equivalent cat part of makes specified here-in-after. 89 S&F in repairs bib cock long body with flange, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete all as specified. 90 S&F in repairs 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. 91 S&F in repairs looking mirror 600 mm x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood with decorative type wooden frame and fixed to wooden plugs with steel screws, complete all as specified and directed. 92 S & F in repair, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® 18278 Complete all as specified and directed by Engineer-in-Charge. (Make: Prayag/Nirali) 93 M&L rotational moulded PVC, triple layered, white colour water storage tanks of capacity 500 litre (cylindrical vertical with closed theard pettern top cover), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc,including all valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore and dismantling unserviceable PVC water tank complete all as specified and directed. 94 M&L for complete removal of existing treatment from internal surfaces on walls by wire brushes and applying with one coat of 1mm average thick cement wall care putty to obtain smooth regular/even finish surfaces by using sand paper and applying two coats ofAcrylic Distemper, complete all as specified and directed. 95 M&L for preparation of plastered or un-plastered old decorated surfaces of ceiling,and applying one coat of white lime wash on ceiling complete all as specified and directed by Engineer-in-charge. 96 M&L for complete removal of existing treatment and preparing plastered or unplastered old surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with exterior wall care putty to rubbing down and stoping of surfaces using sand paper and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old surfaces of any description complete all as specified and directed. 97 M&L for preparation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed. 98 M&L for preparation of old painted surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed. 99 S&F in repair Brass chromium plated shower rose 125mm with shower arm 15mm size, 195mm long with bend of 45 degree with flange including fixing to steel pipe or union complete all as specified and directed. 100 S&F in repair Brass CP central hole wash basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold waterfor 15mm bore iron pipe and fixed as in repair, complete all as specified and directed by Engineer-in-Charge. Make- Prayag Cat Part-9350N or compatible model of makes specified here-in-after. 101 S&F Wall Mount Modern Kitchen Utensils Dish Rack Stainless Steel (31X30X10 Inches)as approved by Engr in chargeMake- Prayrag Cat Part No- PSP-5 or compatible model of makes specified here-in-after. 102 Preparation of newplastered surface in ceiling and applying three coats of white washcomplete all as specified and directed. 103 M&L for cement concrete (1:5:10), type E-2, using 40mm graded brick aggregate, as in sunken portion/sub base, complete all as specified and as directed. 104 Supply and fixing 25mm thick solid core construction with block board core and plywood face panels commercial on both side 105 M&L for water proofing treatment to sunken portions by clearing the sunken/lowered portion of RCC slab surface for full depth of sunken portion, chieseling out the sticked mortar and applying FOSROC Nitoproof 600 PF (minimum 0.8 mm dft) over a priming coat of Nitoproof WB Primer or equivalent product of makes specified here-in-after and applied to bottom and full vrtical sides as per manufacturers instructions.Note:- (a)All pipes passing through walls of sunken floor shall be laid before water proofing treatment is carried out. One No. 50mm dia, 35cm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken protion.(b)The sunken portion will be filled with water for dampness and seepage check. In case the slight indication of seepage/leakage is noticed, the same shall be rectified by injectting / grouting to seal all cracks withapplication of Plymer modified mortar FOSROC nitobond SBR orequivalent product of makes specified here-in-afterwith integral WPC or cementitious crysatlline waterproofing compound in the affecrted raea to seal all cracks and micro cracks at his own cost and nothing extra will be admissible on thgis ground. (c)An additonal coat of FOSROC Nitoproof 600PF or equivalent product of makes specified here-in-after shall be applied to all junction points of side walls where CI/GI pipes are passing and the same will be seeled with epoxy cement mortar. 106 S&F in repairs towel rail 600 mm long, 20 mm dia, ‘D’ type,chromium plated, fixed to walls with screws and plastic cleats, complete all as specified and directed. Make-Prayag SS Towel Rail Cubix Cat No. CPA-46 107 M& L for 25 mm average thick Cement concrete type B-0, 1:2:4 (using 12.5 mm gradedstone aggregate) levelling course finished even andwithout using extra cement etc Complete all as specified and directed. 108 S&F Steel water tubes, 50 mm bore, light grade, galvanized, as in spoutfor sunken floor, fixed in wall, inside end fixed with wire netting and external beveled edge at 45 degree, complete all as specified and directed by Engineer - in -Charge. 109 S&F in repair Wall mixer with L bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down for 15mm bore iron pipe, complete all as specified and directed. Make- Prayag Cat Part-7375N. and equivalent make. 110 S&F in repair PVC waste pipe flexible for Sink/ WHB of 32mm size complete all as specified and directed. 111 S&F Corner glass shelf of radius 300 mm including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs as approved by GE/Engineer in Charge, complete all as specified and directed. 112 S&F soap dish brass, chromium plated fancy type of standard size and specification as directed and fixed to plugs with chromium plated brass screws. 113 S&F angle cock cast copper alloy, chromium plated, fancy typr screwed down, high pressure with curtch or butterfly handles, screwed both ends for 15mm bore iron pipe or for brass ferrule fixed in repair/replacement complete all as specified. 114 Material and labour for 10mm thick rendering in CM 1:3 on surface (edges of chajjas roof, projections and similar work over 10mm thick dubbing out average on irregular face of walls) in two layers, finished the surface even and smooth without using extra cement, including taking down loose/damaged concerete from the surface.Note :- The cost of providing double scaffolding and necessary shuttering is deemed to be inluded in the unit rate quoted and nothing extra will be admissible. 115 S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm double rebated comprisesof glazed & gauged skelton shutter (required no of gauged shutter and glazed shutters) including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (Four Nos of each window) including following fitting welded to frame shutter:- Ref Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3(i)Hold fast,150mm long of MS flat iron 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (ISI Marked)(iii) MS Tower bolt 150mm long-02 Nos per leaf (ISI Marked)(iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per leaf(v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3 (vii) M S guard bar 8mm square bars @75mm C/C fixed horizontlly. Note : Glass,wiremess and painting shall be measured and paid separately. 116 M & L forfirst quality, non skid ceramiccoloured tiles of approved shade, 7 to 8 mm thick as in skirting set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. 117 INTERNAL ELECTRIFICATION 118 Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings, bell, security lights etc., removing materials from site and making good the disturbed surfaces of walls,ceilings etc. 119 M&L for Point wiring with 1.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding med grade, ISI marked PVC conduit not less than 20 mm dia with accessories concealed on wall/ceilingand incuding provision of 1.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including MS sunken box or pressed steel terminal boxes made out of 1.6 mm thick MS sheet with provision of new 3 mm thick plastic laminated sheet top cover over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers incl and making goodthe disturbed surfaces as per existing for for one light/fan point controlled by one switch complete all as per specified and directed. 120 All as per description of item No 119 here-in-after but for one socket outlet point5 Amps on same board complete all as specified. 121 All as per description of item No 119 here-in-afterbut for one socket outlet point5 Amps on independent board. 122 M&L for Point wiring with 2.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked PVC conduit not less than 20 mm dia with accessories concealed on wall/ceilingand incuding provision of 2.5 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including MS sunken boxes or pressed steel terminal boxes made out of 1.6 mm thick MS sheet with provision of new 3 mm thick plastic laminated sheet top cover over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers incl and making goodthe disturbed surfaces all as per existing for for one socket outlet point15 Amps on independent board complete all as per specified and directed. 123 All as per description of item No 119 here-in-after but for one light point controlled by two 2 - wayswitchs complete all as specified 124 All as per description of item No 119 here-in-afterbut for one bell point controlled by one bell push complete all as specified . 125 Supply and fix switch piano 6 Amps flushtype single pole one way 230 volt , AC supply complete all as specified. 126 Supply and fix switch piano 16 Amps flushtype single pole one way 230 volt , AC supply complete all as specified. 127 Supply and fix socket outlet 3 pin 6 amps 230 volt AC flush type complete all as specified. 128 Supply and fix socket outlet 2 in 1,3 pin 6/16 amps 230 volt. flush type complete all as specified. 129 Supply and fix bell push 5 Amps flushtype single pole one way 230 volt , AC supply complete all as specified. 130 Supply and fixing in replacement door bell electric , ding dong type, single phase 230 volts, complete all as specified. 131 Supply and fix ceiling rose3 phase/PVC/polycarbonate, isolated body complete all as specified. 132 Supply and fixing LED lights fitting 1x 20W, 220 V, ACwith driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 133 S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified 134 Supply and fixing, LED Decorative box type batten fitting 1x9 W, prewired suitable for retrofit LED tubes, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1. Sq. mm from ceiling rose to connector block, complete all as specified and directed by Engineer-in-Charge. 135 Supply and fixing in replacementLED bulb 9/10 watts complete a specified and directed. 136 Supply and fixing fan regulator electronicstep type (socket type), 250 volts, AC supply suitable for ceilling fan of any type/make/sweep 137 Supply and fix lamp holder PVC /polycarbonate type with back plate. 138 Supply and fix exhaust fan steel body complete with louvers shutter, voltage 230V, 50 Hz, single phase, Min. 1200 RPM, Copper winding of sweep 300m connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, incl making hole in wall and make good as existing incl dismantling and taking down old unsv completeall as specified and directed. Note: Old unsv exhaust fan will be diposited in MES store yard. 139 Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers.Old exhaust fan will be deposited to the MES. 140 Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat , NRV, connection piece etc. Note: Old unsv Geysers will be deposited in MES store yard. 141 Supply and fix RCBOs for earth leakage, overload and short circuit protection double pole 30 mA current rating 25/32 Amps 230 volts, 50Hz , breaking capacityall as specified and and as directed. 142 Supply and fix MCB TPN/FP 415 volts, 50Hz , breaking capacity 10KA, B curve 40A to 100 A, ISI marked all as specified and as directed. 143 Supply and fix MCB single pole 240 volts, 50Hz , breaking capacity 10KA, B curve 6A to 32A, ISI marked all as specified and as directed. 144 Supply and fix MCB SPN 240 volts, 50Hz , breaking capacity 10KA, B curve 32 A, ISI marked all as specified and as directed. 145 Supply and fixing Load line TPN vertical distribution board 4 Way double door dust protected powder coated inclusive of busbar, neutral link, blanking plates and having provision of MCCB/TPas incomer and MCBs SP/TP as outgoing as per IS - 01 No,having IP-43 protection, complete all as specified and directed. 146 Supply and fix sheet metal enclosures distribution board SPN 12 ways double door , IP 43 protection, 240 volts, with shrouded neutral bar & insulated bus bar and earth link, suitable forMCBs/RCBOs as incomer and out going complete dully grouted on the wall (flush) incl dismantling and taking down old unsv and making connections with suitable size of lugs and making good the disturbed surface matchig with existing surface all as specified and directed. 147 Material and labour for earthing complete with GI earth plate electrode of size 60mm x 60mm x 6mm thick burried directly in ground vertically (depth of pit not less than 2.25 m below normal ground level), with top edge of earth plate not less than 1.5 m below normal ground level, earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, electrode connections using earth lead wire 4 mm (upto body of equipment) by means of nuts, bolts, check nuts & GI washers, connected to main switch board or main control board or test point, protected by galvanized iron pipe light grade 15 mm bore, and watering pipe 20 mm bore GI light grade pipe with funnel & wire mesh,including all necessary excavation & earth work,PCC chamber in PCC (1:2:4) type B-1 & RCC cover, all as shown in electrical plate No 3 of MES Schedule Part-I (2009), testing on completion complete all as specified and as directed.Note(s) :-(i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm.(ii)PCC chamber shall be constructed 500 mm away from the edge of earth pit.(iii) Rate shall include GI strip and protection pipe of length 7.5m, GI pipe beyond 7.5m length required at site shall be measured and paid separately.(iv)Earth resistance should be less than 2 Ohm. In case the test results are not found below 1 Ohm, complete earthing will be redone without any extra cost to Govt. 148 Material and labour for sub main wiring with two single core PVC insulated ,unsheathed stranded copper conductor cable FRLSH 6 sqmm drawing in concealed conduit not less than 25 mm dia with accy and making good the disturbed surface incl one additional PVC insulated , strandedcopper conductor FRLSH of 6.0 sqmm, green colour for earth continuity conductor incl taking down of unsv sub main wiring complete. Note(s): (i) Two runs of 4 Sqmm main cable + one run of 4 Sqmm cable for earth continuity and PVCconduit shall be measured as one unit/one Running Metre. 149 Supply and fix in repair sheet metal enclosure single pole and neutral with a two pin socket and earth plug complete with one MCB single pole and 240V, 20 Amp ‘B’ curve, 10 kA,oe complete all as specified and directed . 150 Material and labour for Sub Main Wiring (in replacement) with two single core 4 Sqmm (nominal area) multi stranded copper conductor FRLSH PVC insulated and unsheathed colour code cables, drawn in and including PVC conduit of suitable size with and including one run of continuous multi stranded copper conductor 4 Sqmm (nominal area) FRLSH PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 4 Sqmm main cable + one run of 4 Sqmm cable for earth continuity and PVCconduit shall be measured as one unit/one Running Metre. 151 Taking down carefully ceiling fan of any size and hanging to same or other location after claening thoroughly complete all as specified. 152 EXTERNAL ELECTRIFICATION 153 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified 154 Disconnecting & taking out defective underground cableany size and any type from trenches, pole, pipe, floor, wall etccomplete all as specified and directed. 155 Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 25.0 sq mm 4.0 core incl thimbles/lugs and connection complete all as per specified and directed.Note: Earth work and HDPE pipe will be measured and paid separately under relevent items. 156 Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose soil and getting out for underground cable/erection of poles, stays , trench etc complete all as specified and as directed by Engineer-in-Charge. 157 Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge. 158 Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge. 159 Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) or road cutting, pole coping complete all as specified and as directed. 160 M&L for cement concrete (1:3:6) type C-1using 20mm graded stone aggregate cast-in-situas mass filling and coping of pole and strut, stayaround the pole , road cutting etc all as specified and directed. 161 Supply & fixing or laying in replacementHDPE (DWC) pipe of outer dia not less 50 mm fixing on poles, walls, under floors, road, drain crossing, laying on surface etcas reqd at site and as per direction of Engr-in-Charge..Note: All items and accessories , bend, joints, nut bolts, clamps etc are measured andpaid separately under relevent items.
Contract Date: Apr 28, 2026 Contract Value : 36.43 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
50.
Defence #9353941 AOC
Tender For Repair / Resurfacing Of Roads Including Connected Items At Ins Chilka; 1 Repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surface in roads, paths etc cutting around edges to least 25mm in depth, making good by applying tack coat at 5 Kg per ten sqm, putting in premixed bituminous macadam, well rammed and shield with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chipping) depth of pot holes exec 30mm complete all as specified and directed. 2 M&L Preparing existing black top road surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etcand applying evenly a priming / tack coat of cutback bitumen RC-70217 at a rate of application of 0.2-0.3 kg/sqm on bituminous as specified in table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified. 3 M&L for laying 40 mm consolidated thickness bituminous premix semi dense asphaltic concrete with 5.5% binder content with paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient by using hot mix plant and paver equipment complete all as specified and directed. 4 M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. 5 S & F in repairs Raised Pavement Markers of size 100 mm x 90 mm x17 mm made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with minimum reflective area of 13 sqcm on each side and fixing with twin polymer epoxy resin based adhesive as per manufacturers specification / instructions complete all as specified and as directed. 6 Demolition of Cement Concrete unreinforced of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer in Charge 7 Dismalting Stone slabs/paver block Laid dry Laid and pointed in any morters of any description or thickness in floors, aprons etc. 8 Material and labour for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed. 9 S&F for Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floorsPattern, size and shade pointed with grey cement and pigment over and including Screed bedor bedding layer of mortar 15mm thk for laying floor finish in CM 1:6includingdismantling of floor, hearth or wall tiling including cement mortar bedding removing of servicable tiles to store and rubbish off the premises all as specified and as directed 10 Material and labour for 60 mm thick machine pressed precast concrete interlocking paver block any shape and size with grey cement andpigmentconfirming to IS 15658-2006 complete all as specified and directed. 11 Material and labour for river sand cushioning under interlocking tiles complete all as specified and directed. 12 Material and labour for providing cement concrete (1:2:4) type B0 (Using 12.5mm graded broken stone aggregate) as in coping, benching to manholes, water troughs and like including weathering slightly rounded or chamfered angles and throathing and including necessary form work complete all as specified and directed. 13 M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. 14 Material and labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line,level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completewith joints to match all as specified and directed.
Contract Date: Mar 23, 2026 Contract Value : 50.82 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 9
TenderDetail
Loading tenders