View Bid Results For Metal Products Tenders

We found 2142 Bid Results related to metal products tenders. You can find Contractor details who won metal products tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–43 of 2142 tenders matching your filters

Defence #11478095 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 8

Punjab View Result →

Educational and Research Institute #11474153 AOC

Contract Date: Ref. Documents Contract Value : ₹ 8.80 Lakh

Boards / Undertakings / PSU No of Bidders 6

Madhya Pradesh View Result →

Railways #11461933 AOC

Supply Of self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coated with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm +/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capable of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertical position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tape and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the tape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place while paint applications inside the painting booth where automated spray painting operations are carried out using high pressure spray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condition 2) ten numbers shall be supplied as s le for conducting suitability tests. , self-adhesive masking tape 25mm width x 30 meters length backed by special grade of crepe paper & coat ed with rubber thermoset adhesive with following qualities. 1) the thickness of the crepe paper tape should be 0.145 mm +/- 10% tolerance. 2) it shall peel off easily from the roll and not tear while doing so and at the same time, it shall be capa ble of being cut-off easily to the required length. 3) it shall hold the 80 gsm kraft masking paper of 700mm width in vertic al position over the coach till it is removed from the surface. 4) adhesion property of the tape over bare metal, tape to tap e and paper to tape shall be good enough to hold the paper during the spray painting operations. 5) during application of painting, it shall not allow the paint to penetrate through it to the substrate. 6) while removing the tape after drying, the t ape shall not peel off the paint or leave any stain over the painted surface. 7) should hold the masking paper in place while paint applications inside the painting booth where automated spray painting operations are carried out using high pressure spray painting equipment. note: 1) the product shelf life should be 12months from the date of manufacture special condi tion 2) ten numbers shall be supplied as sample for conducting suitability tests. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Contract Date: Jul 03, 2026 Contract Value : ₹ 40,020

Government Departments No of Bidders 1

Tamil Nadu View Result →

Educational and Research Institute #11453496 AOC

Bids Are invited for Customized Amc/Cmc For Pre-Owned Products - Supply Of Interactive Digital Panel As Per Required Demand; Supply Of Interactive Digital Panel As Per Required Demand; Comprehensive Maintenance Contract (Cmc); Supply Of Interactive Digital Panel As Per R.. , Customized Amc/Cmc For Pre-Owned Products - Supply Of Metal Enclosure For 75 Inch Panel Safety Sliding Board As Per Required Demand; Supply Of Metal Enclosure For 75 Inch Panel Safety Sliding Board As Per Required Demand; Comprehensive Maintenance Co.. , Customized Amc/Cmc For Pre-Owned Products - Supply Of Mfm Printer As Per Required Demand; Supply Of Mfm Printer As Per Required Demand; Comprehensive Maintenance Contract (Cmc); Supply Of Mfm Printer As Per Required Demand; No , Customized Amc/Cmc For Pre- Owned Products - Supply Of Ups As Per Required Demand; Supply Of Ups As Per Required Demand; Comprehensive Maintenance Contract (Cmc); Supply Of Ups As Per Required Demand; No

Contract Date: Ref. Documents Contract Value : ₹ 4.64 Lakh

Local Bodies No of Bidders 4

Madhya Pradesh View Result →

Educational and Research Institute #11441943 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

West Bengal View Result →

Health and Family Welfare #11430568 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 7

Rajasthan View Result →

Public Administrative Department #11428089 Technical Bid

Tender for For Rate Finalizations And Supply Of Fishery Inputs, Fishing Gears & Crafts, Fish Seeds & Prawn Seeds, Medicine For Prophylactic Measures, Probiotics, Natural Zeolite, Ducklings, Poultry Birds, Piglets, Calves, Fishery Materials, Saplings, Etc. Through Tafcs Ltd. For The Year, 2026-27. , Animals & Birds Feed , Duck Feed Pre-Starter Ration , Duck Feed Starter Ration , Duck Feed Grower Ration , Duck Feed Pre-Breeder Ration , Duck Feed Breeder / Finisher Ration , Poultry Feedpoultry Pre-Starter Ration , Poultry Feed Poultry Starter Ration , Poultry Feed Poultry Grower Ration , Poultry Feed Poultry Pre-Breeder Ration , Poultry Feed Poultry Breeder / Finisher Ration , Pig Feed Pig Starter Ration , Pig Feed Pig Grower Ration , Pig Feed Pig Breeder Ration , Pig Feed Pig Finisher Ration , Cattle Feed Adult Ration , Ground Nut Oil Cake (Do), Gnoc - (De-Oiled - Do) , Ground Nut Cake (Crushed) , Wheat , Wheat Grain (Broken) , Wheat Bran , Soya Bean , Soya Bean Cake , Soya Bean Meal (Do) , Mustard Oil Cake (Do) , Yellow Maize , Maize (Broken) , Bengal Gram (Whole) , Gram Chuni (Crushed) , Oyester Shell Grit , Jowar , Bajra , Rice Polish , Paddy Husk , Paddy Straw , Atta - Flour , Dry Fish , Spawn Feed (Dust - 42 Cp) , Sinking Fish Feed , Floating Fish Feed , Pabda Fish Feed , Tilapia Fish Feed Dust - 38 % Cp , Tilapia Fish Feed Floating - 30 % Cp (2 Mm Size) , Prawn Feed Sinking - 32 % Cp, 2.5 Mm Size , Cat Fish Feed (Singhi) , Cat Fish Feed (Magur) , Cat Fish Feed (Pangasius) , Anabus Fish Feed , Mustard Oil Cake (Moc) , Moc (Dust) , Ground Nut Oil Cake (Gnoc) , Soya Bean Oil Cake , Rice Bran , Quick Lime , Fish Meal , Feed For Asian Sea Bass (Bhetki) , Nylon Cast Net (Complete) , Nylon Cast Net (Complete) , Handmade (---Do---) , Nylon Plastic Drag Net(Chat Jal) , Nylon Plastic Drag Net(Chat Jal) , Nylon Drag Net , Nylon Drag Net , Nylon Fingerling Drag Net , Nylon Fingerling Drag Net , Nylon Plankton Net (Complete) , Breeding Hapa / Happa (Complete) , Breeding Hapa / Happa (Complete) , Motorised Boat , Advanced Tech. (Motorized Boat - 22Hp) , Non Motorised Boat (Traditional) , Paddle Wheel Aerator (Complete) , Indian Major Carp (Imc) - Catla, Rohu & Mrigal , Catla Catla , Mixed Rohu & Mrigal Species , Cyprinus Carpio Species , Ompok Bimaculatus (Pabda) , Heteropneustes Fossilis (Singhi) , Clarias Species (Magur) , Tilapia Species , Anabas Species (Vietnamese Koi) , Pangasius Pangasius , Mystus Species (Tengra) , Lates Calcarifer (Asian Sea Bass) - Barramundi (Bhetki) , Prawn Seeds & Fish Seeds (Size :- 7 Cm) , Juvenile Of Giant Prawn (Macrobrachium Rosenbergii) , Imc - Mixed (Catla, Rohu & Mrigal) , Catla Species , Mixed - Rohu & Mrigal Species , Cyprinus Carpio Species , Ompok Bimaculatus (Pabda) , Heteropneutes Species (Singhi) , Clarias Species (Magur) , Tilapia Species , Anabus Species (Vietnamese Koi) , Pangasius Species , Mystus Species (Tengra) , Labeo Bata (Bata) , Wallagu Attu (Boal) , Lates Calcarifer (Asian Sea Bass) - Barramundi (Bhetki) , Osteobrama Belangeri (Pengba) , Snakehead Channa Punctatus (Taki) , Channa Striatus (Shhol) , Channa Marulius (Gojar) , Channa Barca (Tila Shhol) , Channa Orientalis (Cheng) , Advance Fish Fingerlings (Size : 10 Cm & Above) , Mixed Imc (Catla, Rohu & Mrigal) , Catla Catla , Mixed Fish Fingerlings Of Silver Carp, Rohu, Mrigal & Common Carp , Pangasius Pangasius , Lates Calcarifer (Asian Sea Bass) - Barramundi (Bhola Bhetki) , Wallago Attu (Boal) , Osteobrama Belangeri (Pengba) , Live Brood Fishes , Giant Prawn (Macrobrachium Rosenbergii) , Ompok Bimaculatus (Pabda) , Heteropneustes Fossilis (Singhi) , Clarias Species (Magur) , Tilapia Species , Anabus Species (Vietnamese Koi) , Mystus Species (Tengra) , Puntius Species (Puti) , Pangasius Pangasius , Imc (Catla) , Imc (Rohu) , Imc (Mrigala) , Osteobrama Belangeri (Pengba) , Siblings Of Birds / Animals , Ducklings Local Species , Ducklings Exotic Species (Khaki Campbell) , Piglets Exotic Species , Piglets Hybrids Species , Native Cattle (Heifer) Above 2-5 Yrs (Av. Wt.-150 Kg) , Fishery Materials , Aluminium Container (Hundy) 16 , Aluminium Container (Hundy) 17 , Aluminium Container (Hundy) 18 , Aluminium Container (Hundy) 20 , Aluminium Container (Hundy) 22 , Aluminium Container (Hundy) 24 , Dry Fish For Fermented Fish Product Preparation , Puntius Species (Puti) Grade - I , Puntius Species (Puti)Grade - Ii , Puntius Species (Puti) Grade - Iii , Phasa Species (Setipinna Phasa) Grade - I , Phasa Species (Setipinna Phasa) Grade - Ii , Insulated Ice Box 100 Litres , Insulated Ice Box 75 Litres , Insulated Ice Box 50 Litres , Insulated Ice Box 48 Litres , Insulated Ice Box 30 Litres , Frp Carp Hatchery (Complete Set) , Aquariums With Coloured Metal Stand (& With All Accessories In Complete Shape) , Rectangle Shape Size :- 36X18X24 With 8 Mm Glass (See Bid Document) , Rectangle Shape Size :- 72X24X24 With 12 Mm Glass (See Bid Document) , miscellaneous (Agri - Allied For Integrated Fish Culture) , Acrecanut Sapling , Coconut Sapling , Vermi - Compost

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Cooperative No of Bidders 35

Tripura View Result →

Public Administrative Department #11418578 AOC

Contract Date: Feb 28, 2026 Contract Value : ₹ 20.86 Lakh

Local Bodies No of Bidders 6

Maharashtra View Result →

Public Administrative Department #11417771 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 8

Maharashtra View Result →

10.

Educational and Research Institute #11408306 AOC

Contract Date: Ref. Documents Contract Value : ₹ 42.59 Lakh

Government Departments No of Bidders 5

Delhi View Result →

11.

Petroleum and Natural Gas #11408126 AOC

Bids Are invited for Customized Amc/Cmc For Pre-Owned Products - Amc For Fire And Safety Equipment And System Under Gail Ncr As Per Sow And Sor; Amc For Fire And Safety Equipment And System Under Gail Ncr As Per Sow And Sor; Comprehensive Maintenance Contract (Cmc); .. - Providing Services For Refilling, Replacement & Maintenance Of Fire Fighting Equipments /Installations For Ncr F&S , Hydro-Testing & Painting Of Fm200 Cylinders (With Fm200 Recovery) , Hydro-Testing & Painting Of 45 Kg. Capacity Co2 Cylinders , Hydro-Testing & Painting Of 6.8 Kg. / 4.5 Kg. / 2 Kg. Capacity Co2 Cylinders. , Hydro-Testing & Painting Of 9 Kg. Stored Pressure Dcp Fire-Extinguishers. , Hydro-Testing & Painting Of 75 Kg. / 50 Kg. Dcp Fire-Extinguishers. , Refilling & Pressurisation Of Fm200 Cylinders With N2, Incl. Cylinder-Removal & Re-Fitting In The System At Site [Cylinder Of 45/80/120 Ltrs., Wc, Tp-340] Transportation Charges Shall Be As Per Separate Sor Line Item. (Assumed Refilling Capacity 30Kg / 52.8 / 80Kg). , Refilling Of 45 Kg. Capacity Co2 Cylinders, Co2 Cylinder-Removal & Connection In The System At Site , Refilling Of 75Kg / 50 Kg. Abc-Type Fire-Extinguishers, With Map Powder In Kgs. , Refilling Of 6.8 Kg. / 4.5 Kg. Capacity Co2 Cylinders. , Refilling Of 2 Kg. Capacity Co2 Cylinders , Refilling Of 9 Kg. Capacity Co2 Cylinders , Refilling Of 9 Kg. Stored Pressure Abc-Type Fire-Extinguishers, With Map Powder , Pressurisation With N2 And Replacement Of O-Ring Of 9 Kg. Stored Pressure Abc-Type Fire-Extinguishers Due To Pressure Drop , Without Dcp , Replacement Of Isi-Marked / Vti Or Equivalent Co2 Cylinder-Valve Of Co2 45 Kg Cylinder , Replacement Of Isi-Marked / Vanaz-Make Or Equavalent Co2 Cylinder-Valve (Pilot Cylinder Valve With Sov) Of Co2 45 Kg Cylinder , Replacement Of Valve Assembly Of Fm 200 Cylinder Of Flooding System Isi Marked/Ul Listed And Compatible With Existing System , Replacement Of Electric Control Head Of Fm 200 Cylinder Of Flooding System Isi Marked , Replacement Of Discharge Hose With Fittings At Site For Fm 200 Flooding System Isi Marked/Ul Listed , Replacement Of Fm 200 Cylinder Pressure Gauge , Replacement Of Discharge Hose With Fittings At Site For Co2 Flooding System Isi Marked , Replacement Of Interconnecting Hose With Fittings At Site For Co2 Flooding System Isi Marked , Supply & Fitting Of Nrv 15 Mm For Valve-Connection With System , Replacement Of Safety Valve Disc Brass , Refilling Of Ba Set Cylinder 300Bar, 06 Lts Water Capacity Cylinder , Hydro Testing Of Ba Set Cylinder 300Bar, 06Lts Water Capacity , Replacement Of Delivery Hose Permaline Dia 38Mm, 63Mm Coupling, Length 15Mts Isi-Marked , Replacement Of Delivery Hose Permaline Dia 63Mm, 63Mm Coupling, Length 15Mts Isi-Marked , Installation / Replacement Of Hose Box Acrylic (Capacity Of Two Hoses) , Replacement Of Hose Box Glass [Acrylic/Glass], 4 Mm Thick Sheet , Replacement Of Hose Box Rubber Bidding Per Hose Box , Replacement Of Landing Valve, Gm/Ss , Replacement Of Co2 Cylinder Connecting High Pressure Tube Isi Mark For Dcp 75 Kg. / 50 Kg Trolley Fire-Extinguishers. , Replacement Of Pressure Gauge For Abc-Type 9 Kg Fire-Extinguishers , Replacement Of Valve Assembly For Abc-Type 6Kg/ 9 Kg. / 10 Kg. Fire-Extinguishers Including Pressure Gauge , Replacement Of Safety Pin For Dcp / Co2 Fire-Extinguishers. , Replacement Of Discharge Horn (Without Tube) For Co2 Fire-Extinguishers, Isi-Marked , Replacement Of Discharge Horn With 1 Mtr. Tube For Co2 Fire-Extinguishers, Isi-Marked , Replacement Of Discharge Tube (Complete) For 9 Kg. Abc-Type Stored Pressure Dcp Fire-Extinguishers, Isi-Marked , Replacement Of Discharge Tube, 5 Mtrs. (With Metal Nozzle) For 50/75 Dcp Fire-Extinguishers, Isi-Marked , Replacement Of Pressure Gauge For 50 / 75 Dcp Trolley Fire-Extinguishers, Isi-Marked. , Replacement Of Operating Instruction-Sticker For All Types Of Dcp / Co2 Fire-Extinguishers , Replacement Of Printed Both Sides With Box File Eye Holder Fire-Extinguisher Maint. Cards, Acrylic, 2 Mm Thick Sheet , Replacement / Installation Of Wind Socks Stand , Replacement Of Wind Socks Cloth , Installation / Replacement Of Safety Board (Printed Sun Board) , Painting Of Extinguisher Trolley, Stand, Hose Box Etc Per Trolley , Ccoe Approved Spark Arrestor For Light Motor Vehicle 2 / 2.5 , Ccoe Approved Spark Arrestor For Heavy Motor Vehicle 3 / 4 , Valve Refurbishing / Repairing Kit For Fm200 Cylinder/Argonite Cylinders Before Refilling , Transportation Charges Per Trip For Pick Up & Drop Of For Fire Extinguishers / Fm 200 System Cylinders- Co2 Flooding System Cylinders / Argonite Sytem Cylinders From Site Including Loading & Unloading (1 Lot) , Supply & Installation Of Fm-200 / Co₂ Fitting Of 25 Mm Nrv For Valve Connection With The System. , Supply & Installation Of Fm-200 / Co₂ Fitting Of 20 Mm Nrv For Valve Connection With The System. , Supply & Installation Of Co2 Extinguisher Valve For 2/4.5/6.5/9 Kg Extinguisher , Supply & Installation Of Carrying Handle For 3.2/4.5 Kg Co2 Extinguisher , Supply & Installation Of Rubber Grip For Carrying Handle Of 3.2/4.5 Kg Co2 Extinguisher , Supply & Installation Of Carrying Handle For 6.5/9 Kg Co2 Extinguisher , Replacement Of Wheel With Stand For 6.5/9 Kg Co2 Extinguisher , Replacement Of 75 Kg Dcp Extinguisher Wheel , Replacement Of 75 Kg Dcp Extinguisher Cap Assembly , Replacement Of Extinguisher Box (Ms) , Co2 4.5 Kg Extinguisher Stand (Ms) , Replacement Of Co2 Extinguisher Valve Wheel , Hydrant Post With Double Landing Valves , Hanging Neck Ring For 45 Kg / 60 Kg Capacity Co2 Cylinders , Replacement Of Isi-Marked Argonite Cylinder-Valve , Refilling Of Argonite Cylinders Wc Capacity 80 L(Ig-55) With 380Bar Pressure , Hydro-Testing & Painting Of Argonite Cylinders , Replacement Of Argonite Cylinder Pressure Gauge With Low Pressure Alarm Signal Facility , Refilling Of 6 Kg. Abc-Type Fire-Extinguishers, With Map Powder

Contract Date: Ref. Documents Contract Value : ₹ 1.48 Crore

Boards / Undertakings / PSU No of Bidders 5

Uttar Pradesh View Result →

12.

Tourism #11346896 AOC

Bids Are Invited For 1 Headwall /Endwall Platform For Podium, Those Platform Suitable For Swimming Pool With Water Recirculation In Four Sides. It Is Composed Of An Aisi 304 Stainless Steel Frame And Plastic Grating, Grating Should Be Made Of Polypropylene Composite To Resist Uv Rays And Chemical Products Present In The Water, The Grating Should Have Free Space Of Over 45% To Facilitate Water Recirculation, Platform Can Be Used As Turning Panel And Iy Should Include Anchors For Mounting And For Starting Blocks, Width - 2.5 M. Make - Aqvastar / Astralpool/ Anti 2 Starting Blocks With Mounting Frames And Foundation Bolts - The Starting Block Is Manufactured Using Aisi-316L Painted With Epoxy Resins Or Polished And Dip Of Plate Size 500 X 700 Mm. Hight Density Polyethylene With No-Slip Machining Top Platform, Adjustablem Angle Of Diving Platform Surface Max 10°. Double Handle Horizontal And Vertical For Backstroke Start. The Starting Block Is Provided To Numbers Standard In 4 Sides. Made In According With Fina Regulation In Force. Make - Aqvastar / Depatech/ Anti 3 Float Lane - 150 Mm Dia. Anti Wave Breaker Lane Ropes Made Made In Polyethylene With Anti-Acid And Anti Uva Treatments With Special Feature For Eliminate Wave Movement. Complete With Spring Tensioner All In Stainless Steel 316L And Cover In Silicon, In According With En 13451-5 And Fina Regulation In Force. Suitable For High Level Competitions Including Ss 316L Float Line Fixing Post Anchored On The Deck. Make - Aqvastar / Depatech/ Anti 4 S.S. Float Lane Storage Designed To Transport And Store The Float Line After Use In The Swimming Pool. Easy To Use And Aesthetically Discreet. The Float Line Roller Is Manufactured Using Aisi-304 Stainless Steel And Includes A Pvc Bag For Collecting Excess Water From The Float Lines. BagS Lower Outlets, It Is Emptied In A Controlled Manner With No Water Spillage. The Cart Has Four Rotating Wheels For Maximum Mobility. Two Of These Have A Brake. Suitable For Storage Of 1 No. Of 50 M Long 150 Mm Dia. Float Lane. Make - Aqvastar / Depatech/ Anti 5 False Start Indicator Post- Comprising Of 2 Nos. Stainless Steel 316L Posts Each Of 48 Mm Dia And 1.8 M Height Provided On Either Side Of The Racing Pool Properly Anchored In A Suitable Anchoring Socket On The Deck At Specified Location Including One Post Provided With Pulley And Quick Cord Fixing And Loosening Device And Including False Start Line Comprising Of Polyester Cord And A Float. As Per Fina. Make - Aqvastar / Depatech/ Anti 6 D) Back Stroke Turn Indicator Post - Comprising Of 2 No Stainless Steel Ss 316L Posts Each Of 48 Mm Dia And 1.8 M Height Provided On Either Side Of The Racing Pool Properly Anchored In A Suitable Anchoring Socket On The Deck At Specified Location And Shall Span Across The Sides Including Set Of Flags As Per Specifications As Per Fina. Make - Aqvastar / Depatech/ Anti 7 Water Polo Goal Post, The Water Polo Goal Post Should Be Lightweight, Floating And Very Resistant. It Is Built Entirely From Aluminium And Is Ovenpainted White. Manufacturing And Measurements In Accordance With Fina International Swimming Federation Standards, Floating: Polyurethane Foam-Filled Aluminium Floats, Goal Frame: Aluminium Tube, Net Fastening: Stainless Steel Round Rod, Net Side Pipe: Stainless Steel Round Pipe With Fastening In Frame And Float, Fastening For Goal Lines, Nets Included. Made In According With Fina Regulation In Force. Make - Aqvastar / Depatech/ Anti 8 Maxiflex B Diving Spring Board: The 16’ Maxi-B Is Basically A Onepiece Ribbed Extrusion Of Aluminum Alloy 6070-T6, Heat Treated For Yield Strength Of 50,000 Psi. It Has A Torsion-Box Extrusion, An Anchor Angle, And Tip End Cap Riveted To The Basic Section. It Is Tapered From The Fulcrum Area To The Diving Tip, And It Is Tapered From The Fulcrum Area To The Anchor End. The Double-Taper Allows The Whole Board To Arc While Flexing, Giving It Approximately 15% More Lift Than The 16’ Duraflex. The Anchor Bolts Are Reinforced Underneath By U Shaped Aluminum Pieces: Maxi-Bolting Extrusions. What Distinguishes The Maxi-B From The Other Models Is That The Diving Tip Has 189 Slots In The Metal Of The Top “Skin” Which Reduces The Weight Of The Tip-End. Make - Duraflex 9 Diving Board Short Stand Without Handrail: The Diving Stand Anchor And Fulcrum Assembly Shall Be Durafirm, Short Stand Designed For Mounting On A Concrete, Steel, Or Other Field-Fabricated Diving Platform. The Diving Stand Shall Consist Of Heavy Aluminum Castings Coated With Epoxy. The Roller Tube And Tracks Shall Be Heat Treated Extruded Aluminum, Hard Anodized. The Bearings For The Roller Tube And Slide Shall Be Nylon With Grease Path. The Diving Board Anchor Hinges Shall Be Heat Treated Aluminum Forgings With A Design Tensile Strength Of 35,000 Psi And Shall Be Hard Anodized. The Diving Board Anchor Bolts Shall Be 5/8 Diameter By 3 1/2 Long Silicon Bronze. The Diving Stand Shall Be Supplied (Without Guard Rails), (With Top And Intermediate Guard Rails On Two Sides), Top Guard Rail Only On Two Sides), (Top Guard Rail On One Side Only). The Diving Stand Guard Rails Shall Be Stainless Steel Tubing, Firmly Attached To The Guard Rail Supports With Stainless Steel Band Fasteners. The Rails Shall Be Extended To The Edge Of The Swimming Pool And The Rail Ends Shall Be Fitted With Safety Tips. The Stand Shall Be Designed For Mounting On New Concrete Platforms With The Use Of Six Durafirm, Catalog #70-231-900 Bronze Deck Anchors. Make - Duraflex Total Quantity : 88

Contract Date: Ref. Documents Contract Value : ₹ 1.74 Crore

Government Departments No of Bidders 3

Goa View Result →

13.

Metro Rail #11346602 AOC

Bids Are invited for Hiring Of Third-Party Inspection Agency - Metals Fabricated Metal Products; As Per Atc; Nabcb

Contract Date: Ref. Documents Contract Value : ₹ 6.79 Lakh

Government Departments No of Bidders 4

Kerala View Result →

14.

Housing Urban and Rular Development #11346479 Technical Bid

Tender for Construction Of Modular Ot Eye Under Old Sadar Hospital At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling Â€Œby Passâ€ Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame Â€ Aluminium. Type Â€ Flange Type. Media Â€ Micro Fiber Glass . Se Aling Of Media Â€ By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. Â€ 50 Mm Wg. Separators Â€ Concealed Al. Or Hot Melt G Lue. Capacity Â€ 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) Â€¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish Â€¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.Â€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.Â€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.Â€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.Â€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .Â€¢ All Units Should Have Reduced Anti- Splash Fronts. Â€¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

15.

Housing Urban and Rular Development #11346477 Technical Bid

Tender for Construction Of Modular Ot (Eye) Under Sub Divisional Hospital At Madhupur Dist Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling Â€Œby Passâ€ Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame Â€ Aluminium. Type Â€ Flange Type. Media Â€ Micro Fiber Glass . Se Aling Of Media Â€ By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. Â€ 50 Mm Wg. Separators Â€ Concealed Al. Or Hot Melt G Lue. Capacity Â€ 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) Â€¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish Â€¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.Â€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.Â€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.Â€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.Â€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .Â€¢ All Units Should Have Reduced Anti- Splash Fronts. Â€¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

16.

Housing Urban and Rular Development #11346476 Technical Bid

Tender for Construction Of Modular Ot (General & Gynae) At Chc Under Sarwan Block At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling Â€Œby Passâ€ Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame Â€ Aluminium. Type Â€ Flange Type. Media Â€ Micro Fiber Glass . Se Aling Of Media Â€ By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. Â€ 50 Mm Wg. Separators Â€ Concealed Al. Or Hot Melt G Lue. Capacity Â€ 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) Â€¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish Â€¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.Â€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.Â€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.Â€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.Â€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .Â€¢ All Units Should Have Reduced Anti- Splash Fronts. Â€¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Multi Purpose Ot Table With C - Arm Compitable , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro-Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

17.

Petroleum and Natural Gas #11346013 AOC

Bids Are invited for Hiring Of Third-Party Inspection Agency - Telecom, Electrical Electronic Products, Metals Fabricated Metal Products; To Be Entered By Buyer As Per Domain; Nabcb

Contract Date: Ref. Documents Contract Value : ₹ 4.54 Lakh

Boards / Undertakings / PSU No of Bidders 8

Gujarat View Result →

18.

Public Administrative Department #11341496 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 39

Maharashtra View Result →

19.

Housing Urban and Rular Development #11335412 AOC

Replacement Of Roofing And Misc.Works At Barrack No.13 At Old Hydrabad House , Nagpur (Only For Society) (2Nd Call).- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material uptoa distance of 50m.beyond the building area and stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 2 Providing soling using80mm sizetrapmetalin15cm.layerincludingfilling voidswith Crushed sand/grit, ramming, watering etc. complete. 3 Providing and laying Castinsitu/Ready Mix cement concrete inM-10oftrap/granite/ quartzite/gneiss metal for foundation and bedding including bailing outwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishing if required and curing complete,with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 4 Dismantlingbrickmasonryinlimeorcementmortarandstackingthematerilsasdirected with all leads, lifts etc. 5 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials,stacking the same as and where directed in the compound including scaffolding etc. complete. 6 Removing rafters from roof including the materials asdirectedwithallleads ,liftsetc. complete. 7 Removing purlins from roof including stacking as directed with all leads , lifts etc. complete. 8 Providing second class Burnt Brick masonry with conventional/I.S.type bricks in cement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 9 Providing and laying Castinsitu/Ready Mix cement concreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 11 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing,gussetplatesetc.asperdetaileddesignsanddrawingsoras directedincluding cutting,fabricating,hoisting,erectingfixinginposition, Makingriveted/bolted/welded connectionandone coat of anticorrosive paint andover it 2 coats of oil painting approved quality and shade etc. complete. 12 Providing Gas or Electrical welding for structural steel section, plates as per detailed drawing. For less than 10 mm thick section. 13 Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 14 Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( withinorganic pigment). The paint shallhave atotal coating thickness ofnominal 35mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center.Theendribshallbedesignedforanti-capacitygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)600 mm girth (Surface Width). 15 Providing internal cement plaster 20mm thick in a single coat using Ready to use wall plasterto concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete.a) cement ratio 1:5 With Prior Approval of Concerned S.E. 16 Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete.a) cement ratio 1:5 With Prior Approval of Concerned S.E. 17 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 18 Providing and laying Vitrified MATT finishhaving decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical andconfirmingtoIS15622-2006(GroupBla)ofapprovedmakeshadeandpatternfor flooringinrequiredpositionlaidonabedofbondingchemicalfillingjointscuringand cleaning etc .complete. 19 Supply & Fixing ofRock / Stone Finished outdoor vitrified flooring Tiles 16 mm thick and required width wide in plain pattern includingCement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. 20 PRIVIDING AND FIXING ANTIMICROBIAL ACOUSTICAL FALSE CEILING: Bioguard Mineral Fibre Acoustical Suspended Ceiling System with 19mm thick Acoustics Microlook 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth bright laminated visual with Humidity Resistance (RH) of 99%, NRC 0.7 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 41db as per ASTM E1414, Light Reflectance ≥87% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of Class 0/1 as per BS 476 Part6/7 and Class A as per ASTM E 84with 19mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm./ 600x1200mm. The scrim on the face of the tile shall be cleanable, washable up to 500 cycle as per ASTM D-4828 and resistant to disinfectants. The tile shall be treated with Anti Microbial coating on the face of the tile to achieve cleanroom classification of class 5 (Class 100) as per ISO 14644-1 and suitable forzone 4 area having partical emission under normal conditions of ISO 5, Decontamination Class of CP10 and Bacteriological Cleanliness Class B1 for specific strains as per NF S 90-35:2003 The tile shall have a rating of 8 or above (face) for tests conducted for Resistance to growth of Mold in accordance to ASTM D3273. It shall be suitable for Green Building application, with Recycled content of 35% having VOC and Formaldehyde emission rate less than 0.1mg/m2/hr. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. 21 Transportation of material obtained from debris of various sorts excavated stuff including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed.( Beyond 10 Km. ) 22 Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction material for which royalty is necessary. Natural Sand 23 Testing Charges for Conducting BASIC TEST OF CEMENT.Standard ConsistancyFineness, Specific Gravity,Setting Time ( Initial & Final ), CompressiveStrength, Soundness etc. complete. 24 Testing Charges for Conducting BASIC TEST OF FINE AGGREGATES. Fineness Modulus ( Sieve Analysis ),Silt & Clay Content 25 Testing Charges for Conducting BASIC TEST OF BRICKS Water Absorption (Set of 5 Bricks), CompressiveStrength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). 26 Testing Charges for Conducting BASIC TEST OfSTEEL BAR TESTING Upto 16 mm(Set of 3 Bars)

Contract Date: Jun 22, 2026 Contract Value : ₹ 18.51 Lakh

Government Departments No of Bidders 2

Maharashtra View Result →

20.

Rural Development #11335277 AOC

Tender for Supplying, Delivery And Commissioning Of Trolley For Tractor Agriculture Tractor Trailer Of Solid Waste Management Department Under Bidhannagar Municipal Corporation. (Fund: 15Th Fc) , Supplying, Delivery And Commissioning Of Trolley For Tractor Agriculture Tractor Trailer Of Solid Waste Management Department Under Bidhannagar Municipal Corporation. Specification:- Supplying, Commissioning And Delivery Of Trolley For Tractor Agriculture Tractor Trailer And Should Be Approved From The Ministry Of Agriculture, Arai Certified. 2 Wheel Trailer Of 5 Ton Capacity, One / Three Side Tipping, 2 Mm Side And 3 Mm Base Mild Steel Sheet Metal, Unladen Weight Of 1200-1500 Kgs, Registered Laden Weight Of 5000 Kgs, Gross 16 periodical renewal Of Ply Rating Of Tyre, Length 3050 Mm X 1830 Mm X 530 Mm Height, 300 Mm Ground Clearance. Trolley Must Be Made Compatible With The Existing Tractors Of Bmc. Requirement : 12 Nos. N.B. : - I) Rate To Be Quoted Including Of Gst & Other Charges. Ii) Applicant Must Submit Cataloge Of Products During Submission Of Bids.

Contract Date: Jun 22, 2026 Contract Value : ₹ 19.02 Lakh

Local Bodies No of Bidders 4

West Bengal View Result →

21.

Health and Family Welfare #11335238 AOC

E-Tender For Procurement Of Stationary And Miscellaneous Items Under Table-A, For Two Years From The Date Of Aoc. , Attendance Register 50 Pages , Binding Register100 Pages (4 No) , Binding Register200 Pages (8 No) , Binding Register300 Pages (12 No ) , Binding Register400 Pages (16 No) , Binding Register500 Pages (20 No) , Issue Register 300 Pages , Stock Register 300 Pages , Index Register (500 Pages) , Cash Book300 Pages , Exercise Book 50 Pages , Service Book (West Bengal Form No. 2620) , Note Sheet Pad With Line (100 Sheets Per Pad) , Note Sheet Pad With Out Line (100 Sheets Per Pad) , Carbon Paper (100 Sheets) , Legal Paper (A3) , Paper A4 Size , Executive Bond Paper (A4) (100 Sheets) , Arch File , Printed File (Two Fold) , Printed File (Four Fold) , File Flap , Tag , Plastic Chanel File (Transparent ) Size-A4 , Envelop Ordinary 24 Cm X 11 Cm , Envelop Medium Size 30 Cm X 15 Cm , Envelop Big Size 40 Cm X 30 Cm , Envelop Cotton Coated Size 16 Cm X 12Cm , Envelop Widow Size 24 Cm X 12 Cm , Correction Pen (Whitener) , Jel Pen (Green) , Ball Pen (Blue) , Ball Pen (Black) , Ball Pen (Red) , Marker Pen (Permanent) , Marker Pen (Board) , Cd Marker Pen , Highlighter Pen (Different Colour ) , Ink For Marker Pen , Ink For Stamp Pad , Wood Pencil , Sharpener , Eraser , Page Marker (Sticky Notes) - 3 Colour [150 No. Sheets - 50 Each] , Bot Kin , Alpin , Gems Clip 30Mm , Gems Clip 35Mm , Metal Binder Clip 32Mm , Metal Binder Clip 25Mm , Metal Binder Clip 19Mm , Metal Binder Clip 51Mm , Pin Cushion , Spong (Water) , Paper Weight , Punching Machine (Single Whole) No. 376224 , Punching Machine (Double Whole) Dp480 , Stapler Machine (24/6) , Stapler Machine 10M , Jumbo Stapler Machine - 45P , Stapler Pin(24/6) (1000 Staples) , Stapler Pin (10 No) (1000 Staples) , Calculator , Plastic Scale 6 Inch. , Plastic Scale 1 Ft. , Plastic Scale 1.5 Ft. , Glue , Glue Stick , Waste Paper Busket 10 X 8 , Plastic Bucket - 10 Ltr , Plastic Bucket - 20 Ltr , Plasticdrum - 30 Ltr , Rubberwiper , Swab , Poly Bag (Assortedsize) , Mug (1 Ltr) , Washing Powder , Floor Cleaner5lt Jar , Bleaching Powder , Hand Wash Pouch[Magic Powder-To-Liquid Handwash Makes 200Ml Per Refill] , Soap 75G. , Hand Wash Small , Wash Basin Cleaner , Rubber Gloves For Sweeping (Assorted Size) , Mop , Muriatic Acid , Naptholene Ball 500Gm Pkt , Phool Jharoo , Jute , Kala Hit (200Ml) , Candle Stick (Assortedsize) , Cartoon Box [3Ft. X 2 Ft.] , Rubber Band (Elastic High Quality) , Table Glass , Table Cover , Magnifying Glass 75 Mm , Elastic Band For Chair , Cotton Duster [18 X 18] , Towel [4Ft X 3Ft] , Knief -4 , Scissor -185 Mm , Torch - Double Battery , Battery (Cell 1050) , Battery ( Pencil) - Aa , Battery (Aaa) , Lock & Key 6 Liver , Lock & Key 6 Liver , Brown Tape 2” - 50Mtr. , Cello Tape 1” - 50 Mtr , Thread Ball (White) -200 G. , Thread Ball ( Red & White) - 100 G. , Plastic Thread Ball - 1 Kg. , Metal Stamp With Date , Polymer Stamp , Stamp Pad , Name Plate Fiver , Calling Bell , Peon Bag [18 X 12] , Wall Clock [10 X 12] , Computer Cover , Key Bag , Comparable Printer Cartridge (Model : 005) , Comparable Printer Cartridge (Model : 925) , Comparable Printer Cartridge (Model : 88A) , Comparable Printer Cartridge (Model : 78A) , Comparable Printer Cartridge (Model : W1660a) , Extension Cord(10M) (Including 15 Amp. Port) , Battery For Mother Board (Good Quality) , Tonner For Xerox Machine , Mouse , Mouse Pad , Key Board , Anti Virus For Computer (3 Users, 3 Years ) , Ssd Card 240 Gb , Pen Drive 32 Gb , External Hard Drive(1Tb) , Compatible Ram For Pre Installed Computers 8Gb , Compatible Ram For Pre Installed Computers 4Gb , Ups For Computer 230-V, 3 Pin , Cat – 6 Cable For Internet , Rj-45 , Important Note: 1. All Prospective Bidders Are Requested To Quote The Rate In Boq As Per Accounting Unit & Item Specification As Mentioned In The Table-A. Wrong Quoting Of The Rate In Boq Will Be Dealt With As Per Penal Provisions Of The T&C Of The Tender. 2. Quality Of The Product Supplied, May Be Ascertained By Testing / Physical Examination By The Experts At Any Stage Of The Tender Period. 3. Tendered Quantity Is Just A Tentative Quantity And Should Not Be Treated As Final. It May Increase Or Decrease, As Per Need Of The State. Keeping This In Mind, The Supplier Is Not Allowed To Seek Termination Of The Rate Contract After Finishing Supply Of Tendered Quantity.

Contract Date: Jun 23, 2026 Contract Value : ₹ 3

Government Departments No of Bidders 4

West Bengal View Result →

22.

Housing Urban and Rular Development #11319892 AOC

Contract Date: Jun 19, 2026 Contract Value : ₹ 1.28 Crore

Government Departments No of Bidders 3

Maharashtra View Result →

23.

Chemicals and Fertilizers #11318155 AOC

Contract Date: Ref. Documents Contract Value : ₹ 22.38 Lakh

Boards / Undertakings / PSU No of Bidders 3

Maharashtra View Result →

24.

Educational and Research Institute #11316829 AOC

Contract Date: Ref. Documents Contract Value : ₹ 39.65 Lakh

Boards / Undertakings / PSU No of Bidders 3

Delhi View Result →

25.

Defence #11316050 AOC

Bids Are invited for Customized Amc/Cmc For Pre-Owned Products - Camc Of Metal Shredder Machine; Rssd; Comprehensive Maintenance Contract (Cmc); Monthly; No

Contract Date: Ref. Documents Contract Value : ₹ 6.36 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 4

Madhya Pradesh View Result →

26.

Rural Development #11314838 AOC

Contract Date: Jun 18, 2026 Contract Value : ₹ 23.97 Lakh

Government Departments No of Bidders 6

Odisha View Result →

27.

Environment and Forests #11310520 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

Madhya Pradesh View Result →

28.

Civil Aviation #11310481 AOC

Contract Date: Ref. Documents Contract Value : ₹ 6.74 Lakh

Boards / Undertakings / PSU No of Bidders 5

Tamil Nadu View Result →

29.

Educational and Research Institute #11309731 AOC

Bids Are invited for Raw Material White Board Marker - Whiteboard Markers Black, Blue, Red And Green 4.43 Mm Bullet Tip Non-Toxic Smooth Writing Easy Wipe , Cleaning Liquid 50Ml - Liquid Cleaning Kit For Laptop For Laptops Computers, Gamingm, Mobiles , Photo Copy Paper A4 - Copier Paper A4 Size 70 Gsm 500 Sheets White Paper, 1 Ream For Laserjet Inkjet Printer Fast Drying Both Side Print Eco Friendly Color , Rj 45 Connector - Rj45 Connector Module Plugs , Mouse Usb Product - Comfort Wired Usb Mouse 3 Button 1000 Dpi Optical Sensor Plug And Play For Windows Mac Black , Keyboard Usb Product - Wired Usb Keyboard Plug Play 105 Button Mouse 1000 Dpi High Precision Advanced Optical Sensor , Cat 6 Cable 305Meter - Colour Gray Connector Gender Male To Male Item Weight 10570 Grams Item Length 305Meter , Stapler 10No Small - Staples Combo Standard Stapler With Quick Loading Mechanism Sturdy Durable For Long Time Use Color May Vary Pack Of 1 , Remote Battery Aaa - Aaa Battery Duracell Devices Clock Toy Remote , Battery Clock Aa - Aa Battery Duracell Devices Clock Toy Remote , Cd - A Compact Disc Cd Is A Digital Optical Disc Data Storage , Dvd - A Compact Disc Dvd Is A Digital Optical Disc Data Storage , Usb-Hub Bus - Ultra Slim Multiport Type C Hub To 1Xusb 3.0 And 3Xusb 2.0 Ports , Vga Cable 1 To 2 - Cable 1 Male Vga To 2 Female Vga Splitter Cable For Laptop, Television, Personal Computer , Curtains - Size 4X6 Silky Cloth , M.S.Flat 50X12mm - Ms Flat Rectangular Ms Flat, For Industrial 50X12mm , M.S.Flat 100X10mm - Ms Flat Rectangular Ms Flat, For Industrial 100X10mm , M.S.Flat 50X8mm - Ms Flat Rectangular Ms Flat, For Industrial 50X8mm , M.S. Electrode 2.5Mm - Welding Rod E6013 2.5 X 350Mm (Mse011) Isi Grade Mild Steel Electrode Rutile Coated Arc Welding Rods For Ac/Dc Easy Strike, Smooth Bead, Low Spatter General Fabrication And Repair , M.S Sheet 3 X 8 X 2.5Mm - Ms Sheet 2.5 Mm Rectangular Mild Sheet For Industrial , M.S Sheet 4 X 8 X 3Mm - Ms Sheet 3 Mm Rectangular Mild Sheet For Industrial , Welding Machine Output Copper Leads 35Mm - Isi Welding Cable 35 Sq.Mm Flexible Isi Certified Copper Welding Cable For Workshop And Fabrication Use , Pvc Gang Box 4X8 Modular - Modular Surface Gang Box, White 4X8 , Pvc Gang Box 4X10 Modular - Modular Surface Gang Box, White 4X10 , Multistandard Copper Wire 4Mm - Pvc Copper Wire 4Mm Pro Fr Electrical Wire, 90 Meter Fire Resistant Single Core Pvc Insulated Pure Copper Wire, Anti Rodent Anti Termite Flexible Wire For Connections Black , Multistandard Copper Wire 4Mm - Pvc Copper Wire 4Mm Pro Fr Electrical Wire, 90 Meter Fire Resistant Single Core Pvc Insulated Pure Copper Wire, Anti Rodent Anti Termite Flexible Wire For Connections Red , Bar Magnet - Enhancing Efficiency And Precision In Manufacturing Processes 4 Inch , Carbon Resitor 01 K - Tolerance 1K Mr Ohm Mf Through Hole Resistors Axial Lead , Diode 1N 4007 - Diode In4007 Passive, Two Terminal Electrical Components That Limit Or Regulate The Flow Of Electric Current In A Circuit , Mcb 63 Tpn With Box - Mcb Single Pole 63 Triple Pole Mcb With Box Isi Marked , Steel Screw 15Mm 100Nos - Screw 15Mm Steel Screw Paster Boards Solid Stainless , Pvc Rawal Plug 3.5Mm - Rawl Plug Heavy Duty Plastic Rawl Plugs Durable Expansion Anchors For Plasterboard, Masonry, Brick And Concrete Wall Fixings For Screws , Wooden Screw 75Mm 100Nos - Screw 75Mm Fixing Wood, Plywood, Paster Boards Solid Stainless , Pvc Cable Clip 6Mm - Pvc White Cable Clip 6Mm , Pvc Cable Clip 10Mm , Pvc Cable Clip 20Mm , 4 Core 2.5Mm Armoured Cable - 4 Core 2.5Mm Armoured Cable Lt Power Cable Insulation Material Xlpe Conductor Material Aluminum Number Of Cores 4 Core Application Power Cable Voltage 1100 V Current Rating 34 To 418 , Pvc Casing Caping 1 Inch 6Ft Length - Pvc Casing N Caping, For Electric Wire Installation 3M , Sand Paper Zero Number - Sanding Paper Emery Paper Sand Paper , Led Bulb 18W - Led Bulb 18W Electric High Glo Led Bulb 18W, B22d Cap, 6500K , Solar Torch - Solar Torch Electric High Glo Led Bulb 18W, B22d Cap, 6500K , Seek Jadhu - Jhadu Seek Jhadu Plastic Wet And Dry Brush (White) , Table Cloth Size 5X3 - Machine Washable Rectangle Tablecover For Office Table , Kachra Bag - Leak Proof And Tear Resistant Trash Bags For Kitchen Home And Commercial Use Dustbin Bags For Dry And Wet Waste With Free Check Duster Cloth -Black , Register 2 Quire - Register 2 Quire, Pages C Ruled Single Line Register For Office Record Keeping , Register 4 Quire - Register 4 Quire, Pages C Ruled Single Line Register For Office Record Keeping , Chalk White - Chalk White A Soft, Porous, Sedimentary Carbonate Rock Primarily Made Of Calcium Carbonate , Duster - Wooden Duster For White Boards, Glass Boards And Chalk Boards , Stepler 24X6 Big - Staples Combo Standard Stapler With Quick Loading Mechanism Sturdy Durable For Long Time Use Color May Vary , Marker Ink 15 Ml - White Board Marker Ink - 15 Ml Suitable For White Board Surface School Stationery Easily Refill Bold Color Smudge Proof Quick Drying , Bill Register - Bill Register 70 Gsm Paper With Hard Binding Cover For Long Durability , Batten Holder 05 - Batten Type, White, Isi Certified, Ideal For Ceiling/Wall Use With Standard , Angle Holder 05 - Angle L Holder Fancy Type 240V White , Pendent Holder 05 - Pendant Bulb Holder For Wall, B22 Batten L Holder For Led/Electric Bulb For Home (White) , Pvc Aluminium Wire 2.5 Mm Single Strand - Aluminium Wire Electric Cable Heavy Duty 2.5Mm 2 Core Aluminium Cable For Electrical Fittings , Kit - Kat Fuse 100A - 100A 415 Volt Ac Porcelain Fuse Units (Kitkat Fuse) , Winding Wire Copper 32 Swg - Enameled Copper Wire - 32 Gauge (0.27 Mm Diameter) - 99.9% Pure Copper Wire - Winding Wire , Winding Wire Copper 35 Swg - Enameled Copper Wire - 35 Gauge (0.27 Mm Diameter) - 99.9% Pure Copper Wire - Winding Wire , Winding Wire Copper 36 Swg - Enameled Copper Wire - 36 Gauge (0.27 Mm Diameter) - 99.9% Pure Copper Wire - Winding Wire , Cotton Winding Tape - Cotton Tape For Winding Insulation And Multipurpose Use , Winding Sleev Umpire 01 No - Fiberglass Insulation Sleeve 1Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 02 No - Fiberglass Insulation Sleeve 2Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 03 No - Fiberglass Insulation Sleeve 3Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 04 No - Fiberglass Insulation Sleeve 4Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 05 No - Fiberglass Insulation Sleeve 5Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Sand Paper 00 To 01 No - Sandpaper, 9 X 11 Inches, Silicon Carbide, Ultra Fine Grit 60, Foam Backed, Compatible With Sanding Block, Suitable For Metal, Wood, Plastic , Winding Paper Millinex Paper - Insulation Paper Sheet Class F 155Degree C Electrical Insulation Paper Flame Resistant High Dielectric Aramid Sheet For Motor And Transformer , Lock 55Mm - Lock 55Mm Combinations Steel Body Hardened Shackle 8 Brass Levers Made In India Padlock 3 Silver Keys , Coolent - Hybrid Tech Antifreeze Coolant For Bikes Ready To Use Radiator Fluid, Prevents Overheating Corrosion, Long-Lasting Engine Protection , Gardening Pipe 1Inch - Gardening Pipe 1Inch Heavy Duty 3 Layered Braided Pipe 30 Meter Long Water Hose Pipe Pvc Braided Pipe Green Garden Outdoors Pipes With Hose Connector , Saddle Patti - Plastic Saddle Cl 25Mm , Metal Mcb Channel Patti - Mounting Rail 35Mm X 7.5Mm Slotted Galvanized Steel Channel For Electrical Panels, Terminal Blocks, And Mcb Mounting , Pvc Clip 6Mm - Pvc White Cable Clip 6Mm , Pvc Flexible Coper Wire 4Mm - Pvc Flexible Coper Wire 4 Sqmm 90 Meter Copper Wire Hrfr Heat Resistant Flame Retardant Lead-Free Cable Low Smoke Halogen-Free Wire For Home And Industrial Electrical Wiring , Pvc Flexible Coper Wire 1.5Mm - Pvc Flexible Coper Wire 1.5Mm Electrical Wire, 90 Meter Fire Resistant Single Core Pvc Insulated Pure Copper Wire, Anti Rodent Anti Termite Flexible Wire For Connections (Black , Screw 4Inch - Ms Screw 6 X 100 Mm (4 Inch) , Soldering Iron 65Watt - Heavy-Duty 65 Watts Soldering Iron With Pvc Wire And Copper Tip , Upvc Pipe 3X4inch - Upvc Water Pipe Of Size 3X4inch , Upvc Elbow 3X4inch - Upvc Elbow 3X4inch Fittings Elbow 90 Degree 3Inch White , Upvc Tee 3X4inch - Plain Upvc Tee For Plumbing Pipe 3X4 Inch , Upvc Solvent 200Grm - Pvc Heavy Body Solvent For Pvc Larger Dia Pipes And Fittings , Taflon Tape - Plumbing Gas And Thread Sealing Ptfe Leak-Proof, Multi-Purpose Sealant Tape , Pvc Cl Pipe 3X4inch - Pvc U Shaped Pipe Cl S With Flat Nail Ivory Wire And Tube Holder Durable Pipe Clip , Upvc Union 3X4inch - Upvc Union Pipe Fitting, 1.9 Cm 3X4 Inch, White , Upvc Socket Adapter 3X4inch - Upvc Reducing Socket 3X4 Inch To 1X2 Inch White , Upvc Reducing Adapter 1Inch To 3X4inch - Upvc Reducing Socket 3X4 Inch To 1X2 Inch White , Upvc Brass Elbow 3X4inch To 1X2inch - Upvc Brass Elbow For Pipe Fitting 3X4 X 1X2 Inch , Upvc Ball Valve 3X4inch - Upvc Compact Ball Valve 3X4inch 25Mm , Upvc Tank Adapter 3X4inch - Upvc Socket Tank Connector 3X4inch , Steel Tap 1X2inch - Stainless Steel Long Body Taps For Bathroom And Kitchen Taps With Chrome Finish And Quarter Turn Fitting , Water Tank 2000Lit 6 Layer - Water Tank 2000 Lit Six Layer Water Tank 2000 Liter Capacity Blow Mould Tanks Food Grade Antibacterial, Uv And Heat Resistant Tank Hdpe Material White Color , Water Tank 1000Lit 6Layer - Water Tank 1000 Lit Six Layer Water Tank 1000 Liter Capacity Blow Mould Tanks Food Grade Antibacterial, Uv And Heat Resistant Tank Hdpe Material White Color , Upvc Pipe 1Inch - Upvc Water Pipe 1 Inch , Upvc Elbow 1Inch , Upvc Tee 1Inch , Upvc Socket Adapter 1Inch , Upvc Union 1Inch , Pvc Cl Pipe 1Inch , Upvc Tank Adapter 1Inch , Upvc Ball Valve 1Inch , White Board 4X6 - Whiteboard Drywipe Magnetic With Pen Tray And Aluminium Trim, 4 Ft X 6Ft , Casing Patti 2Inch - Cassing Patti 2Inch Designed For Surface-Mounting Electrical Wires , Big Bucket - Big Bucket Industries Unbreakable Strong Plastic Bathroom Bucket 12 Ltr , Wooden Beat 3X4inch Half Round - Half Round Wooden Moulding Beat Patti For Furniture Rack Side Fitting , Nails 1Inch - 1Inch Steel Concrete Nails , Ms Round Bar 30Mm - Ms Round Bar 30 Mm Black Mild Steel Round Bar , Ms Round Bar 40Mm - Ms Round Bar 40 Mm Black Mild Steel Round Bar , Ms Round Bar 45Mm - Ms Round Bar 45 Mm Black Mild Steel Round Bar , Ms Round Bar 50Mm - Ms Round Bar 50 Mm Black Mild Steel Round Bar , Ms Round Bar 60Mm - Ms Round Bar 60 Mm Black Mild Steel Round Bar , Ms Round Bar 65Mm - Ms Round Bar 65 Mm Black Mild Steel Round Bar , Mobile Oil 40No. - Mobile Oil 40No. Engine Oil For Diesel Engine , Cutting Oil - Cutting Oil Water Soluble Cutting Oil , Power Saw Blade 1Inxh X 14Inch - Power Hexa Blade (14Inchx1inchx0.050Inch) Hss Bimetal Power Hacksaw Blade , Hand Hacksaw Blade 1X2x12inch - Hand Hexa Blade 1X2inchx1x2inchx0.050Inch Hss , Emery Paper 80No. - Emery Paper 80No. Coarse Brown Sandpaper For Wood, Metal, Walls And Diy Finishing Medium Size, Emery Material, Paper Backing , Emery Paper 100No. - Emery Paper 100No. Coarse Brown Sandpaper For Wood, Metal, Walls And Diy Finishing Medium Size, Emery Material, Paper Backing , Wire Bursh 4Inch - Steel Wire Brush With Plastic Handle, 5 Rows , Chalk Clolour - Color Chalks Limestone Slate Pencils Chalk Piece Full , Grease - Grease Long Lasting Lubricant For Cars, Buses, Trucks, 2 Wheeler, 3 Wheeler, Agriculture And Construction) , File Card - Abrasive File Card With Wooden Handle , Engine Oil - Engine Oil 20/40No. Engine Oil For Diesel Engine , Service Cable 3 Core 4Mm Flat , Weight Machine 500Kg. Platform Size 2X2 - Electronic Platform Weighing Scale 600X600mm Mild Steel 500Kg Capacity, 50G Accuracy Oiml R76 Compliant, Iso Certified Digital Weight Machine For Shop, Warehouse, Industrial Use , Ladder 20Ft Foldable Type - Aluminum Wall Support Extension Ladder , Router 4G Lte Wireless Dongle , Switch 8 Port 1000Mbps Gigabit - 1000Mbps Full Duplex 8 Port Gigabit Switch Hub Lan Gigabit Ethernet Desktop Network Switches Black Total Quantity : 4361

Contract Date: Ref. Documents Contract Value : ₹ 11.85 Lakh

Boards / Undertakings / PSU No of Bidders 4

Madhya Pradesh View Result →

30.

Environment and Forests #11307952 Price Bid

Tender for Purchase For Computer, Printer And Other Computer Accessories , Content Name , Computer Desktop All-In-One, 13Th Gen Intel Core I5-1334U (16Gb Ddr4, 1Tb Ssd) Ips, Three-Sided, Micro-Edge, Anti-Glare, Fhd, 27 (68.6 Cm), Win 11 Home, Office 24, Fhd Camera, , Computer Desktop Processor: I3 13Th Generation • 16 Gb Ram • 1Tb Ssd • Keyboard & Mouse. • Intel Uhd Graphics 730 • Display 22 Inch Fhd. • Windows 11 Home. • Ms Office • Only Branded Products Will Be Entertained. • Warranty 1 Year , Computer Desktop Processor: I5 13Th Generation • 16 Gb Ram • 1Tb Ssd • Keyboard & Mouse. • Intel Uhd Graphics 730 • Display 22 Inch Fhd. • Windows 11 Home. • Ms Office • Only Branded Products Will Be Entertained. • Warranty 1 Year. , Computer Desktop Processor: I7 13Th Generation • 16 Gb Ram • 1Tb Ssd • Keyboard & Mouse. • Intel Uhd Graphics 730 • Display 22 Inch Fhd. • Windows 11 Home. • Ms Office • Only Branded Products Will Be Entertained. • Warranty 1 Year. , All In One Printer Automatic Duplex Laser Printer With 30 Pages Per Minute Print Speed, Multifunction (Print Scan Copy) 2 In 1 (Id) Copy Button, Lcd Display, 32 Mb Memory, 250 Sheet Paper Tray, Usb , Canon Eos 200D Ii Dslr Camera Ef-S 18 - 55 Mm Is Stm And 55 - 250 Mm Is Stm Black , Led Tv • Product: Led Tv • Display: 1.38 M • Resolution: 4K (3840 X2160) • Set Weight: 13.7 Kg • Design: Slim Look • Connectivity: Bluetooth, Hdmi, Usb. • Operating System: Tizen Smart Tv, • Adaptive Sound • Sound Output: 20 Watt • 4K Upscaling • 55 Inch Display. • Picture Engine: Crystal Processor 4K • Only Branded Products Will Be Entertained.(Samsung, Sony & Lg).Entertained.(Samsung, Sony & Lg). , Led Tv • Product: Led Tv • Display: 1.38 M • Resolution: 4K (3840 X2160) • Set Weight: 13.7 Kg • Design: Slim Look • Connectivity: Bluetooth, Hdmi, Usb. • Operating System: Tizen Smart Tv, • Adaptive Sound • Sound Output: 20 Watt • 4K Upscaling • 40 Inch Display. • Picture Engine: Crystal Processor 4K • Only Branded Products Will Be Entertained.(Samsung, Sony & Lg). , Projector Epson Home Tw750 3Lcd Full Hd With 1080P , Lg Ultrawide 24 Inch Ips Fhd, 2560X1080 Pixels, Color Calibrated, 100Hz, 7W X 2 Inbuilt Speaker, Usb-C, Display Port, Hdmi, White Color-29Wq600 , Lg Ultrawide 27 Inch Ips Fhd, 2560X1080 Pixels, Color Calibrated, 100Hz, 7W X 2 Inbuilt Speaker, Usb-C, Display Port, Hdmi, White Color-29Wq600 , Photocopy-Kyocera Ecosys Ma4000x Boundary Wall All-In-One Wireless Laser Printer. Copy, Print, Scan Up To 42Ppm. Dual Scan Document Processor And Free Ocr, Cloud & Mobile Utilities , Laptop-13Th Generation Intel® Core™ I5 Processor Windows 11 Home 40.6 Cm (16) Diagonal 2K Ips Display Intel® Iris® 128Gb Storage, 16Mp Rear + 8Mp Front Camera,Wi-Fi + 4G Lte(Calling), Android 14,Bt 5.2, Slim Metal Body , Tab With Stylus Pen 11.45 Ips Display, G99-8781 Processor, 8Gb Ram + 256Gb Storage, 16Mp Rear+8Mp Front Camera,Wi-Fi + 4G Lte(Calling), Android 14,Bt 5.2, Slim Metal Body, 5G Mobile (Moonlight Silver, 8Gb Ram, 128Gb Storage) | 50Mp Ois Triple Camera | Gorilla Glass Victus Ip54 | 6Th Gen Os Upgrades Ai | Gemini Live | Lag-Free Gaming | , Qr Code Scanner Machine Wireless , Apple 2026 Macbook Neo 13 Laptop With A18 Pro Chip: Built For Ai And Apple Intelligence, Liquid Retina Display, 8Gb Unified Memory, 512Gb Ssd Storage, 1080P Facetime Hd Camera, Touch Id; Citrus , Hp Printer Caritrdge 88A , Hp Printer Caritrdge 12A , Hp Printer Caritrdge 110A , Hp Printer Caritrdge 166A , Compatible Caritrdge 88A , Compatible Caritrdge 12A , Compatible Caritrdge 110A , Compatible Caritrdge 166A , Printer Coritridge Reffiling 88A, 12A, 110A, 166A , Pcr Road , Blade , Kyocera Photocopy Toner Caritridge Tk 4109 , Canon Scanner Lide 400 , Canon Laserjet Printer 2900B , Microtek Ups Legend 650 650Va/360W Micro Processer Based Line Interactive Ups System Power Backup , Hp 64 Gb Usb 3.2 Flash Drive Silver Metal , Hp 128 Gb Usb 3.2 Flash Drive Silver Metal , Hp Usb Keyboard & Mouse , Hp Wifi Keyboard & Mouse , Computer Speaker 3 , D-Link Internet Lan Cable , Wifi Router Extender 300 Mbps , Vga Cable , Computer Power Cable , Mother Board H 61 , Smps Mini , Ram Ddr 3 8Gb , Hdd 1 Tb , Hdd 2 Tb , Shd 128Gb , Shd 256 Gb , Shd 500 Gb , Hp Smart Tank 589 All-In-One Wifi Color Printer Up To 4000 Black & 6000 Color Prints I Print,Scan & Copy For Home/Office , Hp Web Camera , Extension Board 4 Port , Network Switch 10 Port , Dsc Singing+Incription 3 Year , Antivirus Vvau Total Security 1 Year , Antivirus Vvau Total Security 3 Year

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

Madhya Pradesh View Result →

31.

Educational and Research Institute #11307155 AOC

Tender For Term Contract For Civil Maintenance And Repair Works Of Aiims Raipur Residential Complex; 1. Acid/Alkali Resistant Tile Somany/ Nitco/ Kajariya/ Bell 2. Premium Acrylic Emulsion Paint: Interior Asian (Royale)/ ICI (Velvet)/ Berger (Silk Glamour)/ Nerolac Impression 3. Admixures& Epoxy FOSROC/ Aquomix/ BALENDURA/ROFF/Dr.Fixit/CICO/SIKA/BASF 4. Aluminium Composite Panel Alpolic/ Aluco Bond/ Reynobond/ Euro bond/ Alstrong/Aludewr 5. Aluminium Extrusions/ Sections Hindalco/ Indalco/ Jindal/Indian Aluminium Co. 6. P.T.M.T. Accessories Prayag, PRAKASH, SHURYA/Supreme/Kingston 7. Annealed Float Glass Saint Gobain/ Modi Guard/ Hindustan Pilkington/TATA 8. Centrifugally Cast Iron Pipe & Fittings Neco/ RIF/ Kapilansh/ BIC/SKF/Electrosteel 9. Ceramic Tiles Kajaria/ Somany/ Nitco/ Orient Bell/ Johnson/Varmora/AGL/OASIS/Marbito 10. Cement Concrete Chequrred tiles Raj-Tiles/ Bharat/ Rigid Tiles/Advance/Ultra Tiles/NITCO 11. CP Bottle Trap Parryware / Hindware/ Jaquar/ GRAFDOER by VMS BathwarePvt. Ltd./Prayag 12. CP Brass Bibcock/ Pillarcock/ Stopcock/ Angle Valve/ Concealed Stop Cock & CP fittings (Normal Range) Marc(oriental series)/ Parko/ Jaquar (Continental series)/SPRING COLLECTION OF PRIMA /GEM/ESS/Plumber/ GRAFDOER by VMS BathwarePvt. Ltd. /L&K Metro/Vardhman/’Coral’ series of parryware/’JOY’ & ‘VINTAGE’ series of KEROVIT by Kajaria /Prayag 13. CP Waste Coupling Mark/ GRAFDOER by VMS BathwarePvt. Ltd./ Parko or equivalent /Prayag 14. Curtain Carrier Vista levlor or equivalent. 15. Dash fastener/ Expansion Bolt/Stone Cladding Clamp M/s DevAshish/HILTI/Fischer/Bosch/Wurth/Trixel. 16. Door closer/ floor springs Dorma/ Haffle/ Falcon/Godrej/Dorset/Kich/Sandhu/Hardwyn 17. Drapery Rod Vista Levlor or equivalent. 18. Flushing cistern (single/Dual Flush) as per IS: 7231 Sleek Dual flush PVC cistern of Hindware / ‘Slimline’ofParryware /Prayag 19. EPDM Gasket AnandLescuyer or equivalent. 20. Epoxy Primer & Paints Berger/ Pidilite/ CICO/ BASF/ SIKA/Asian/Nerolac/ICI Kansai Akzo Nobel. 21. Fibre Glass Shelf Kamal/ Bath King or equivalent. 22. Float/Clear/Frosted/Toughened /Refractive Glass Modi Float/ Saint Gobain/ Asahi/AIS/Modiguard. 23. Flush Doors / Shutters as per IS: 2202 Kutty flush door/ Anchor/ Century/ Kitlam/Archid/JAYNA/Ashiyana Brand by Evergreen Industries/ Bhimsaria Door/ Century/ Greenply /Archid/Kitply/Selected Products Company/Jain Doors pvt. ltd./Duro/Durian 24. Flush Valve Aquel/ Marc/ Parryware/ Jaquar /Prayag 25. FRP Shutters/frame Fibre Glass Engineers/ Raipur/ Aashoo Model or equivalent/JAYNA/ Selected Products Company. 26. Galvanized/Stainless Steel Anchor Fasteners Shakti/ Arrow/ Hilti/ Fischer 27. GI fitting Tata/ Jindal/ Zenith/UNIK/AVR/Zoloto. 28. GI Pipe Tata/ Zenith/ Jindal (HISAR)/Prakash Surya. 29. Glass Mosaic Tile Bissazza/ Saon or equivalent. 30. Gun Metal Gate Valve Zoloto/ Leader/ SAINT 31. False Ceiling system Boral Gypsum / India Gypsum/ Laffarge/ St. Gobain(Gyproc)/ Armstrong/Hunter Dougals/Aearolite/Gridsquare/Interarch 32. Hardner Hard crete of Snowcem India/ MC Deritop F.H. 33. Jet Assembly for EWC Parryware/ Jaquar/ Grohe/ Kohler 34. Laminate Marino/ Greenlam/ Decolam/ Century/ Formica/ Kitlam/Action TESA/Sunmica/Durian 35. Low Level PVC Cistern Single flush Sleek model Cistern of PVC of Hindware or ‘Slimline’ model of Parryware, JINDAL /Prayag 36. Melamine Polish Melamine Gold of Asian Paint/Wudfinof pidilite/Timbertone of ICI Dullex/ Beegel. 37. Metal False Ceiling Nittobo / Armstrong / Trac / Durlum / Huntordonglas/Aerolite 38. Mineral Fibre/Calcium silicate Ceiling Armstrong / Nitobo / Daiken / Hunter Douglas/ Aerolite 39. Modular SS Railing System Metallica India / Stark steel Fabricator / D-line International Denmark / Mobel Hardware. 40. M.S .Pipe (Railing) Jindal / Prakash Surya/ Tata/ RINIL 41. Marine Plywood / BWP Ply Kitply / Duro / Century/ Greenlam/ Durian 42. Non asbestos high impact polypropelene reinforced Cement sheet Everest or equivalent 43. Oil Bound Distemper/Dry Distemper Asian (Professional Acrylic Distemper)/Maxilite of ICI / Bisan of Berger/Nerolac (Beauty Acrylic Distemper) 44. Water closet (Orissa Pan/Indian type) & fittings, accessories as per IS : 2556 Parryware / Hindware /’KEROVIT’ by Kajaria/ESSCO by Jaquar. 45. PE-AL-PE Composite pipes Jindal or equivalent. 46. Plastic Connection Pipe Parryware/Kamal Delux or equivalent. 47. Plywood/Veneer Archid/ Kitply/ Green ply/ Century/JAYNA/Green Ply/Merino/Duro/Durian

Contract Date: Jun 18, 2026 Contract Value : ₹ 58.17 Lakh

Government Departments No of Bidders 3

Chhattisgarh View Result →

32.

Public Administrative Department #11306281 AOC

Contract Date: Jun 19, 2026 Contract Value : ₹ 33.26 Lakh

Local Bodies No of Bidders 3

Maharashtra View Result →

33.

Public Administrative Department #11306280 AOC

Contract Date: Jun 22, 2026 Contract Value : ₹ 49.64 Lakh

Local Bodies No of Bidders 3

Maharashtra View Result →

34.

Housing Urban and Rular Development #11300693 AOC

Contract Date: Jun 17, 2026 Contract Value : ₹ 1.20 Crore

Statutory Bodies & Commissions/Committees No of Bidders 2

Goa View Result →

35.

Educational and Research Institute #11299551 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Tamil Nadu View Result →

36.

Rural Development #11297176 Price Bid

Tender for Supply And Installation Of Children Park Equipment Items For Gram Panchayat Rangat , Name Of Items & Product Diamensions , Multi Play (Age Group 6-12 Year) Size: L32 X W13.5 X H13 Safe Area Size: L38 X W19.5 X H16 • Spiral Slide Junior - 1 No • Wave Slide With Arch - 1 No • Straight Slide - 1 No • Metal Bridge - 1 No • Metal Ladder - 1 No Specifications: Made Of Heavy Duty Gi Structure Of 76Mm Main Pipes, 60Mm, 50Mm,31Mm And 25Mm Od Pipes Etc. Welded And Grinded For The Smooth Finish, Applied With 1 Coat Of Red-Oxide Primer And 2 Coats Of Spray Painted Automative Paint And Fiberglass Parts Are Made Up With Hand Lay-Up Process Starting With Preparing Of Molds Polishing And Applying Releaser And Minimum 2 Coats Of Isc Gel Coat Mixed With Pigments (10%) Hand Layup Fiberglass (Csm) Impregnated With Polyester Resin Final Part Produced Is Then Finished By Cutting Off Extra Edges And Sanded To Ensure Smooth Edges. Reinforcement Is Embedded Wherever Required. , Park Swing 2 Seater (Frp Bucket Seat) (Age Group 6-12 Year) Size: L10 X W5 X H6.75 Safe Area Size: L13 X W8 X H10 Height: 8.0 Ft Leg Support: 40 Nb Gi Pipe 2-3.5Mm Top Bar: 40Nb Gi Pipe 2-3.5Mm Frame: 32 Nb Gi Pipe 2-3.5Mm Seat Capacity: 2 Children Specifications: Made Of Heavy Duty Gi . Welded And Grinded For The Smooth Finish, Applied With 1 Coat Of Red-Oxide Primer And 2 Coats Of Spray Painted Automative Paint And Fiberglass Parts Are Made Up With Hand Lay-Up Process Starting With Preparing Of Molds Polishing And Applying Releaser And Minimum 2 Coats Of Isc Gel Coat Mixed With Pigments (10%) Hand Layup Fiberglass (Csm) Impregnated With Polyester Resin Final Part Produced Is Then Finished By Cutting Off Extra Edges And Sanded To Ensure Smooth Edges. Reinforcement Is Embedded Wherever Required. , Circular Swing (Age Group 3-14 Year) Size: L5 X W5 X H6.75 Safe Area Size: L8 X W8 X H10 Height: 8.0 Ft Leg Support: 40 Nb Gl Pipe 2-3.5Mm Top Bar: 40Nb Gl Pipe 2-3.5Mm Circular Frame: 32 Nb Gi Pipe 2-3.5Mm Seat: 4Mm Frp Seat Capacity: 4 Children Specifications: Made Of Heavy Duty Gi . Welded And Grinded For The Smooth Finish, Applied With 1 Coat Of Red-Oxide Primer And 2 Coats Of Spray Paint Final Part Produced Is Then Finished By Cutting Off Extra Edges And Sanded To Ensure Smooth Edges. Reinforcement Is Embedded Wherever Required. , Frp Duck Merry Go Round (Age Group 3-14 Years) Size: L6 X W6 X H3 Safe Area Size: L9 X W9 X H5 Leg Support: 40 Nb Gl Pipe 2-3.5Mm Top Bar: 40Nb Gl Pipe 2-3.5Mm Circular Frame: 32 Nb Gi Pipe 2-3.5Mm Seat: 4Mm Frp Seat Capacity: 4 Children Specifications: Made Of Heavy Duty Gi . Welded And Grinded For The Smooth Finish, Applied With 1 Coat Of Red-Oxide Primer And 2 Coats Of Spray Paint Final Part Produced Is Then Finished By Cutting Off Extra Edges And Sanded To Ensure Smooth Edges. Reinforcement Is Embedded Wherever Required. , Kiddies Safe Roter (Age Group 3-14 Years) Size: L5 X W5 X H3.25 Safe Area Size: L8 X W8 X H6.25 Leg Support: 40 Nb Gl Pipe 2-3.5Mm Frame: 32 Nb Gi Pipe 2-3.5Mm Seat: 4Mm Frp Seat Capacity: 6 Children Specifications: Made Of Heavy Duty Gi . Welded And Grinded For The Smooth Finish, Applied With 1 Coat Of Red-Oxide Primer And 2 Coats Of Spray Paint Final Part Produced Is Then Finished By Cutting Off Extra Edges And Sanded To Ensure Smooth Edges. Reinforcement Is Embedded Wherever Required. , 4 Seater Seesaw (Age Group 3-14 Years) Size: L8.75 X W5 X H3 Safe Area Size: L11.75 X W8 X H6 Leg Support: 40 Nb Gl Pipe 2-3.5Mm Frame: 32 Nb Gi Pipe 2-3.5Mm Seat: 4Mm Frp Seat Capacity: 4 Children Specifications: Made Of Heavy Duty Gi . Welded And Grinded For The Smooth Finish, Applied With 1 Coat Of Red-Oxide Primer And 2 Coats Of Spray Paint Final Part Produced Is Then Finished By Cutting Off Extra Edges And Sanded To Ensure Smooth Edges. Reinforcement Is Embedded Wherever Required. , Frp Park Bench (Age Group 3-14 Years) Size: L5 X W2 X H3 Safe Area Size: L8 X W5.5 X H6 Specifications: Made Of Heavy Duty Gi Structure Of 76Mm Construction Of Main Pipes, 60Mm, 50Mm,31Mm And 25Mm Od Pipes Etc. Welded And Grinded For The Smooth Finish, Applied With 1 Coat Of Red-Oxide Primer And 2 Coats Of Spray Painted Automative Paint And Fiberglass Parts Are Made Up With Hand Lay-Up Process Starting With Preparing Of Molds Polishing And Applying Releaser And Minimum 2 Coats Of Isc Gel Coat Mixed With Pigments (10%) Hand Layup Fiberglass (Csm) Impregnated With Polyester Resin Final Part Produced Is Then Finished By Cutting Off Extra Edges And Sanded To Ensure Smooth Edges. Reinforcement Is Embedded Wherever , Multiplay Station (Age Group 5 -12 Years) Size: L21 X W21 X H16 Safe Area Size: L27 X W27 X H19 • Wave Slide With Arch - 1 No • Spiral Slide Junior - 1 No • Frp Polygon Roof - 1 No • Polygon Bed - 1 No • Ladder - 1 No • Flag - 1 No Specifications: Made Of Heavy Duty Gi Structure Of 76Mm Construction Of Main Pipes, 60Mm, 50Mm,31Mm And 25Mm Od Pipes Etc. Welded And Grinded For The Smooth Finish, Applied With 1 Coat Of Red-Oxide Primer And 2 Coats Of Spray Painted Automative Paint And Fiberglass Parts Are Made Up With Hand Lay-Up Process Starting With Preparing Of Molds Polishing And Applying Releaser And Minimum 2 Coats Of Isc Gel Coat Mixed With Pigments (10%) Hand Layup Fiberglass (Csm) Impregnated With Polyester Resin Final Part Produced Is Then Finished By Cutting Off Extra Edges And Sanded To Ensure Smooth Edges. Reinforcement Is Embedded Wherever Required. , Multiplay (Age Group 5-12 Years) Size: L11 X W8 X H10.5 Safe Area Size: L17 X W14 X H13.5 • Curve Slide With Bed - 1 No • Ladder- 1 No • Squire Roof - 1 No Specifications: Made Of Heavy Duty Gi Structure Of 76Mm Construction Of Main Pipes, 60Mm, 50Mm,31Mm And 25Mm Od Pipes Etc. Welded And Grinded For The Smooth Finish, Applied With 1 Coat Of Red-Oxide Primer And 2 Coats Of Spray Painted Automative Paint And Fiberglass Parts Are Made Up With Hand Lay-Up Process Starting With Preparing Of Molds Polishing And Applying Releaser And Minimum 2 Coats Of Isc Gel Coat Mixed With Pigments (10%) Hand Layup Fiberglass (Csm) Impregnated With Polyester Resin Final Part Produced Is Then Finished By Cutting Off Extra Edges And Sanded To Ensure Smooth Edges. Reinforcement Is Embedded Wherever Required.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 6

Andaman And Nicobar Islands View Result →

37.

Petroleum and Natural Gas #11297004 AOC

Bids Are invited for Hiring Of Third-Party Inspection Agency - Metals Fabricated Metal Products, Oil And Gas; Pressure Vessel; As Per Tender Document

Contract Date: Ref. Documents Contract Value : ₹ 3.12 Lakh

Boards / Undertakings / PSU No of Bidders 3

Andhra Pradesh View Result →

38.

Public Administrative Department #11294800 Technical Bid

Tender For Supply Of Construction Material-2 Ghadla / Kankar / Jhajhra 3 Mud Mortar / Mud Masala 4 Kiln-Burnt Lime For Lime Masonry Work 5 Cement 6 Ppc (Portland Pozzolana Cement) 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Fly Ash 12 Surkhi (Brick Dust) 13 Stone Dust (For Masonry Work) 14 Stone / Brick Ballast (For Purposes Other Than Road Work) 15 Stone Grit, 40Mm Size (Hand-Broken) (Deduct 1/11 For Voids) 16 Stone Grit, 40Mm Size (Crusher-Broken) (Deduct 1/11 For Voids) 17 Stone Grit, 20Mm Size (Crusher-Broken) 18 Stone Grit, 12/10/6Mm Size (Crusher-Broken) 19 Brick Ballast 20 Materials For Road Work (Including 5 Km Lead) 21 Stone Ballast, 63-40 Mm (Crusher-Broken) (Deduct 1/11 For Voids) 22 Stone Ballast, 63-40 Mm (Hand-Broken) (Deduct 1/11 For Voids) 23 90-45 Mm Hand-Broken Stone Aggregate (Deduct Voids 1/11) 24 Quarry Rubble (Deduct Voids 1/6) 25 Gravel (Deduct Voids 1/6) 26 Kankar (Deduct Voids 1/6) 27 Binding Material (Pi 4-6) (Deduct Voids 1/6) 28 Brick (22.5 X 11 X 7.50 Cm) 29 First Class (I Class) 30 Second Class (Ii Class) 31 Soling / Paving / Masonry Stone 32 Rubble Masonry (Rr) 33 Coursed Rubble Masonry (Cr) 34 Paving Soling (For Flooring Works Up To 15 Cm Height) 35 Paving Soling (For Road/Paving Works Up To 23 Cm Height) 36 Jodhpur-Type Stone Slabs / Arches / Fragments (Length 2-3 Ft, Width 10-12 In, Thickness 2.5-3.5 In) 37 Stone Chips (Flaky Material) (3-4 In Thick; Length And Width 1-2 In) 38 Sandstone (Dpc, Sill, Coping, Lintel, Shelf, Almirah, Etc.) 39 Up To 25 Mm Thickness 40 Up To 25-40 Mm Thickness 41 Up To 40-50 Mm Thickness 42 Up To 50-75 Mm Thickness 43 Up To 75-100 Mm Thickness 44 Up To 100-150 Mm Thickness 45 Flooring / Paving Stone Slabs 46 Flooring Slabs Up To 35 Mm Thick (Min.) Area Of 3 Sq. Ft. Or More 47 Stone Slabs (Katla) For Paving — 60-75 Mm Thickness; Min. Area Of 3 Sq. Ft. Or More 48 Unpolished (Rough) Kota Stone 49 Up To 900 Sq. Cm 50 From 901 To 2300 Sq. Cm 51 Greater Than 2300 Sq. Cm 52 Polished Kota Stone (Polished On One Side) 53 Up To 900 Sq. Cm 54 From 901 To 2300 Sq. Cm 55 Greater Than 2300 Sq. Cm 56 Marble Stone (Makrana Adanga — 20 Mm Thick) 57 Up To 900 Sq. Cm 58 From 901 To 2300 Sq. Cm 59 Greater Than 2300 Sq. Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone (Rajsamand — Ii Quality / Local; 20 Mm Thick) 63 Up To 900 Sq. Cm 64 From 901 To 2300 Sq. Cm 65 Greater Than 2300 Sq. Cm 66 Stone Door Frame 67 Single Rebate — Size: 100 X 75 Mm 68 Double Rebate — Size: 125 X 75 Mm 69 Stone Slabs 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5 M To 2.40 M Length, Minimum 50Mm Thick 72 2.4 M To 3.0 M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles/Brick/Block For Road Work 79 Cement Interlocking Block M-30 Grade, 60Mm Thick 80 Cement Interlocking Block M-30 Grade, 80Mm Thick 81 Cement Interlocking Block M-30 Grade, 100Mm Thick 82 Frpvc Insulated Copper Conductor Single Core Cable (Isi Marked) 83 1.50 Sq. Mm 84 2.50 Sq. Mm 85 0.50 Sq. Mm 86 1.00 Sq. Mm 87 4.00 Sq. Mm 88 6.00 Sq. Mm 89 Local Timber (Including Fittings—For Doors, Windows, And Furniture) 90 Factory-Made Doors (30 Mm Thick, Solid Core, Single Leaf) 91 Structural Steel 92 Iron (Tor Steel Fe 415/500 For Reinforcement) 93 Binding Wire (18 Gauge) 94 Iron Girders 95 Angle Iron / Square Bars / Flat Strips 96 Barbed Iron Wire (Size: 12 Gauge Wire & 12 Gauge Strand / 12 Gauge Wire & 14 Gauge Strand / 14 Gauge) 97 Iron Wire Mesh (24 Gauge, 14 Mesh) 98 Cement Concrete Jali (Lattice) — 40 Mm Thick 99 Glass 100 Glass (3 Mm Thick) 101 Paints / Colors 102 Enamel Paint 103 Distemper (Water-Bound) 104 Lime — For Whitewashing (Aras / Kali) 105 Primer (For Iron / Wood) 106 Petroleum Products 107 Diesel (Hsd) 108 Mobil Oil 109 Bitumen Shalitex Board (25 Mm Thick) 110 Plain Sheet (Flat Metal Sheet) 111 G.I. Sheet (22 Gauge / 0.80 Mm) 112 G.I. Sheet (24 Gauge / 0.63 Mm) 113 M.S. Sheet (22 Gauge / 0.80 Mm) 114 M.S. Sheet 24 Gauge (0.63 Mm) 115 Corrugated Sheet 116 G.I. Sheet 1 Mm Thick 117 G.I. Sheet 22 Gauge (0.80 Mm) 118 Asbestos Cement Sheet 6 Mm (2.5/2.75 X 1 M) 119 Other Sheets 120 Pvc Sheet 1 Mm Thick (Colored/Plain) 121 Literoof Expo Sheet (Green/Yellow) (183 X 90) 122 G.I. 15 Mm Diameter (B Class) 123 G.I. 20 Mm Diameter (B Class) 124 G.I. 25 Mm Diameter (B Class) 125 A.C. 75 Mm Diameter 126 A.C. 100 Mm Diameter 127 Pvc 90 Mm Diameter (With Ring) 128 Pvc 110 Mm Diameter (With Ring) 129 Pvc 140 Mm Diameter (With Ring) 130 Pvc 110 Mm (2.5 Kg/Sq. Cm) With Coupler 131 Sanitary 132 Indian W.C. 133 Orissa W.C. 134 European W.C. 135 Foot Rest 136 Vitreous China Lip-Type Urinal 430 X 350 X 300 Mm (With Coupling, Bracket, And Pvc) Waste Pipe 137 Wash Basin (450 X 300 Mm) Complete With Coupling, Brackets, And Pvc Waste Pipe 138 Stone Ware (S.W.) Pipe, 100 Mm Diameter, 0.6 M Length 139 C.P. Pillar Cock (15 Mm Dia) (Is Marked) 140 C.P. Bib Cock (15 Mm Dia) (Is Marked) 141 C.P. Grating (Jali), 125 Mm Diameter 142 Rcc Np3 Hume Pipe With Collar 143 1200 Mm Diameter 144 1000 Mm Diameter 145 750 Mm Diameter 146 600 Mm Diameter 147 450 Mm Diameter 148 300 Mm Diameter 149 Steel Conduit (Isi Marked) 150 20 Mm Diameter 151 25 Mm Diameter182 40.00 Mm Diameter 183 Copper Wire 8 Swg (4.00 Mm Diameter) (0.117 Kg/M) 184 Ci/Ms Cover Plate, Attached To The Locking Mechanism Frame 185 Fuel (Including Pol And Operator) 186 Diesel Road Roller (8 To 10 Ton) 187 Sheep Foot Roller 188 Truck (9 Ton) 189 Tractor (25-40 Hp) 190 Tractor With Trolley 191 Tractor With Water Tanker (Capacity: 4000 Liters) 192 Cement Concrete Mixer (5-7 Cubic Feet) 193 Pumping Set (15 Hp) 194 Needle/Plate Vibrator (With Operator) 195 Camel Cart / Bullock Cart (With Driver) 196 Grinding Machine (Large, Motorized) — With Operator 197 Compressor 198 Hydraulic Excavator / Jcb (Bucket Capacity: 0.4 Cu.M) 199 Dumper 200 Tractor With Scraper 201 Shuttering (Wooden Planks) — Including Props And Other Materials 202 Shuttering (Plywood) — Including Props And Other Materials 203 Shuttering (Iron Plates) — Including Props And Other Materials 204 Water And Pumping Charges (For Filling/Curing) 205 Grinding Machine (Small, Hand-Operated) — With Operator 206 Iron Formwork For Well (Dia: 3M, Height: 75Cm) — Including T&P, Installation At Site, And Removal After The Specified Period 207 Cultivator

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Rajasthan View Result →

39.

Public Administrative Department #11294790 Technical Bid

=Tender For Supply Of Construction Material=-2 Ghadla / Kankar / Jhajhra 3 Mud Mortar / Mud Masala 4 Kiln-Burnt Lime For Lime Masonry Work 5 Cement 6 Ppc (Portland Pozzolana Cement) 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Fly Ash 12 Surkhi (Brick Dust) 13 Stone Dust (For Masonry Work) 14 Stone / Brick Ballast (For Purposes Other Than Road Work) 15 Stone Grit, 40Mm Size (Hand-Broken) (Deduct 1/11 For Voids) 16 Stone Grit, 40Mm Size (Crusher-Broken) (Deduct 1/11 For Voids) 17 Stone Grit, 20Mm Size (Crusher-Broken) 18 Stone Grit, 12/10/6Mm Size (Crusher-Broken) 19 Brick Ballast 20 Materials For Road Work (Including 5 Km Lead) 21 Stone Ballast, 63-40 Mm (Crusher-Broken) (Deduct 1/11 For Voids) 22 Stone Ballast, 63-40 Mm (Hand-Broken) (Deduct 1/11 For Voids) 23 90-45 Mm Hand-Broken Stone Aggregate (Deduct Voids 1/11) 24 Quarry Rubble (Deduct Voids 1/6) 25 Gravel (Deduct Voids 1/6) 26 Kankar (Deduct Voids 1/6) 27 Binding Material (Pi 4-6) (Deduct Voids 1/6) 28 Brick (22.5 X 11 X 7.50 Cm) 29 First Class (I Class) 30 Second Class (Ii Class) 31 Soling / Paving / Masonry Stone 32 Rubble Masonry (Rr) 33 Coursed Rubble Masonry (Cr) 34 Paving Soling (For Flooring Works Up To 15 Cm Height) 35 Paving Soling (For Road/Paving Works Up To 23 Cm Height) 36 Jodhpur-Type Stone Slabs / Arches / Fragments (Length 2-3 Ft, Width 10-12 In, Thickness 2.5-3.5 In) 37 Stone Chips (Flaky Material) (3-4 In Thick; Length And Width 1-2 In) 38 Sandstone (Dpc, Sill, Coping, Lintel, Shelf, Almirah, Etc.) 39 Up To 25 Mm Thickness 40 Up To 25-40 Mm Thickness 41 Up To 40-50 Mm Thickness 42 Up To 50-75 Mm Thickness 43 Up To 75-100 Mm Thickness 44 Up To 100-150 Mm Thickness 45 Flooring / Paving Stone Slabs 46 Flooring Slabs Up To 35 Mm Thick (Min.) Area Of 3 Sq. Ft. Or More 47 Stone Slabs (Katla) For Paving — 60-75 Mm Thickness; Min. Area Of 3 Sq. Ft. Or More 48 Unpolished (Rough) Kota Stone 49 Up To 900 Sq. Cm 50 From 901 To 2300 Sq. Cm 51 Greater Than 2300 Sq. Cm 52 Polished Kota Stone (Polished On One Side) 53 Up To 900 Sq. Cm 54 From 901 To 2300 Sq. Cm 55 Greater Than 2300 Sq. Cm 56 Marble Stone (Makrana Adanga — 20 Mm Thick) 57 Up To 900 Sq. Cm 58 From 901 To 2300 Sq. Cm 59 Greater Than 2300 Sq. Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone (Rajsamand — Ii Quality / Local; 20 Mm Thick) 63 Up To 900 Sq. Cm 64 From 901 To 2300 Sq. Cm 65 Greater Than 2300 Sq. Cm 66 Stone Door Frame 67 Single Rebate — Size: 100 X 75 Mm 68 Double Rebate — Size: 125 X 75 Mm 69 Stone Slabs 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5 M To 2.40 M Length, Minimum 50Mm Thick 72 2.4 M To 3.0 M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles/Brick/Block For Road Work 79 Cement Interlocking Block M-30 Grade, 60Mm Thick 80 Cement Interlocking Block M-30 Grade, 80Mm Thick 81 Cement Interlocking Block M-30 Grade, 100Mm Thick 82 Frpvc Insulated Copper Conductor Single Core Cable (Isi Marked) 83 1.50 Sq. Mm 84 2.50 Sq. Mm 85 0.50 Sq. Mm 86 1.00 Sq. Mm 87 4.00 Sq. Mm 88 6.00 Sq. Mm 89 Local Timber (Including Fittings—For Doors, Windows, And Furniture) 90 Factory-Made Doors (30 Mm Thick, Solid Core, Single Leaf) 91 Structural Steel 92 Iron (Tor Steel Fe 415/500 For Reinforcement) 93 Binding Wire (18 Gauge) 94 Iron Girders 95 Angle Iron / Square Bars / Flat Strips 96 Barbed Iron Wire (Size: 12 Gauge Wire & 12 Gauge Strand / 12 Gauge Wire & 14 Gauge Strand / 14 Gauge) 97 Iron Wire Mesh (24 Gauge, 14 Mesh) 98 Cement Concrete Jali (Lattice) — 40 Mm Thick 99 Glass 100 Glass (3 Mm Thick) 101 Paints / Colors 102 Enamel Paint 103 Distemper (Water-Bound) 104 Lime — For Whitewashing (Aras / Kali) 105 Primer (For Iron / Wood) 106 Petroleum Products 107 Diesel (Hsd) 108 Mobil Oil 109 Bitumen Shalitex Board (25 Mm Thick) 110 Plain Sheet (Flat Metal Sheet) 111 G.I. Sheet (22 Gauge / 0.80 Mm) 112 G.I. Sheet (24 Gauge / 0.63 Mm) 113 M.S. Sheet (22 Gauge / 0.80 Mm) 114 M.S. Sheet 24 Gauge (0.63 Mm) 115 Corrugated Sheet 116 G.I. Sheet 1 Mm Thick 117 G.I. Sheet 22 Gauge (0.80 Mm) 118 Asbestos Cement Sheet 6 Mm (2.5/2.75 X 1 M) 119 Other Sheets 120 Pvc Sheet 1 Mm Thick (Colored/Plain) 121 Literoof Expo Sheet (Green/Yellow) (183 X 90) 122 G.I. 15 Mm Diameter (B Class) 123 G.I. 20 Mm Diameter (B Class) 124 G.I. 25 Mm Diameter (B Class) 125 A.C. 75 Mm Diameter 126 A.C. 100 Mm Diameter 127 Pvc 90 Mm Diameter (With Ring) 128 Pvc 110 Mm Diameter (With Ring) 129 Pvc 140 Mm Diameter (With Ring) 130 Pvc 110 Mm (2.5 Kg/Sq. Cm) With Coupler 131 Sanitary 132 Indian W.C. 133 Orissa W.C. 134 European W.C. 135 Foot Rest 136 Vitreous China Lip-Type Urinal 430 X 350 X 300 Mm (With Coupling, Bracket, And Pvc) Waste Pipe 137 Wash Basin (450 X 300 Mm) Complete With Coupling, Brackets, And Pvc Waste Pipe 138 Stone Ware (S.W.) Pipe, 100 Mm Diameter, 0.6 M Length 139 C.P. Pillar Cock (15 Mm Dia) (Is Marked) 140 C.P. Bib Cock (15 Mm Dia) (Is Marked) 141 C.P. Grating (Jali), 125 Mm Diameter 142 Rcc Np3 Hume Pipe With Collar 143 1200 Mm Diameter 144 1000 Mm Diameter 145 750 Mm Diameter 146 600 Mm Diameter 147 450 Mm Diameter 148 300 Mm Diameter 149 Steel Conduit (Isi Marked) 150 20 Mm Diameter 151 25 Mm Diameter182 40.00 Mm Diameter 183 Copper Wire 8 Swg (4.00 Mm Diameter) (0.117 Kg/M) 184 Ci/Ms Cover Plate, Attached To The Locking Mechanism Frame 185 Fuel (Including Pol And Operator) 186 Diesel Road Roller (8 To 10 Ton) 187 Sheep Foot Roller 188 Truck (9 Ton) 189 Tractor (25-40 Hp) 190 Tractor With Trolley 191 Tractor With Water Tanker (Capacity: 4000 Liters) 192 Cement Concrete Mixer (5-7 Cubic Feet) 193 Pumping Set (15 Hp) 194 Needle/Plate Vibrator (With Operator) 195 Camel Cart / Bullock Cart (With Driver) 196 Grinding Machine (Large, Motorized) — With Operator 197 Compressor 198 Hydraulic Excavator / Jcb (Bucket Capacity: 0.4 Cu.M) 199 Dumper 200 Tractor With Scraper 201 Shuttering (Wooden Planks) — Including Props And Other Materials 202 Shuttering (Plywood) — Including Props And Other Materials 203 Shuttering (Iron Plates) — Including Props And Other Materials 204 Water And Pumping Charges (For Filling/Curing) 205 Grinding Machine (Small, Hand-Operated) — With Operator 206 Iron Formwork For Well (Dia: 3M, Height: 75Cm) — Including T&P, Installation At Site, And Removal After The Specified Period 207 Cultivator

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Rajasthan View Result →

40.

Public Administrative Department #11294773 Technical Bid

Tender For Supply Of Construction Material Gp Bhakundi-02 Ghadla / Kankar / Jhajhra 3 Mud Mortar / Mud Masala 4 Kiln-Burnt Lime For Lime Masonry Work 5 Cement 6 Ppc (Portland Pozzolana Cement) 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Fly Ash 12 Surkhi (Brick Dust) 13 Stone Dust (For Masonry Work) 14 Stone / Brick Ballast (For Purposes Other Than Road Work) 15 Stone Grit, 40Mm Size (Hand-Broken) (Deduct 1/11 For Voids) 16 Stone Grit, 40Mm Size (Crusher-Broken) (Deduct 1/11 For Voids) 17 Stone Grit, 20Mm Size (Crusher-Broken) 18 Stone Grit, 12/10/6Mm Size (Crusher-Broken) 19 Brick Ballast 20 Materials For Road Work (Including 5 Km Lead) 21 Stone Ballast, 63-40 Mm (Crusher-Broken) (Deduct 1/11 For Voids) 22 Stone Ballast, 63-40 Mm (Hand-Broken) (Deduct 1/11 For Voids) 23 90-45 Mm Hand-Broken Stone Aggregate (Deduct Voids 1/11) 24 Quarry Rubble (Deduct Voids 1/6) 25 Gravel (Deduct Voids 1/6) 26 Kankar (Deduct Voids 1/6) 27 Binding Material (Pi 4-6) (Deduct Voids 1/6) 28 Brick (22.5 X 11 X 7.50 Cm) 29 First Class (I Class) 30 Second Class (Ii Class) 31 Soling / Paving / Masonry Stone 32 Rubble Masonry (Rr) 33 Coursed Rubble Masonry (Cr) 34 Paving Soling (For Flooring Works Up To 15 Cm Height) 35 Paving Soling (For Road/Paving Works Up To 23 Cm Height) 36 Jodhpur-Type Stone Slabs / Arches / Fragments (Length 2-3 Ft, Width 10-12 In, Thickness 2.5-3.5 In) 37 Stone Chips (Flaky Material) (3-4 In Thick; Length And Width 1-2 In) 38 Sandstone (Dpc, Sill, Coping, Lintel, Shelf, Almirah, Etc.) 39 Up To 25 Mm Thickness 40 Up To 25-40 Mm Thickness 41 Up To 40-50 Mm Thickness 42 Up To 50-75 Mm Thickness 43 Up To 75-100 Mm Thickness 44 Up To 100-150 Mm Thickness 45 Flooring / Paving Stone Slabs 46 Flooring Slabs Up To 35 Mm Thick (Min.) Area Of 3 Sq. Ft. Or More 47 Stone Slabs (Katla) For Paving — 60-75 Mm Thickness; Min. Area Of 3 Sq. Ft. Or More 48 Unpolished (Rough) Kota Stone 49 Up To 900 Sq. Cm 50 From 901 To 2300 Sq. Cm 51 Greater Than 2300 Sq. Cm 52 Polished Kota Stone (Polished On One Side) 53 Up To 900 Sq. Cm 54 From 901 To 2300 Sq. Cm 55 Greater Than 2300 Sq. Cm 56 Marble Stone (Makrana Adanga — 20 Mm Thick) 57 Up To 900 Sq. Cm 58 From 901 To 2300 Sq. Cm 59 Greater Than 2300 Sq. Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone (Rajsamand — Ii Quality / Local; 20 Mm Thick) 63 Up To 900 Sq. Cm 64 From 901 To 2300 Sq. Cm 65 Greater Than 2300 Sq. Cm 66 Stone Door Frame 67 Single Rebate — Size: 100 X 75 Mm 68 Double Rebate — Size: 125 X 75 Mm 69 Stone Slabs 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5 M To 2.40 M Length, Minimum 50Mm Thick 72 2.4 M To 3.0 M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles/Brick/Block For Road Work 79 Cement Interlocking Block M-30 Grade, 60Mm Thick 80 Cement Interlocking Block M-30 Grade, 80Mm Thick 81 Cement Interlocking Block M-30 Grade, 100Mm Thick 82 Frpvc Insulated Copper Conductor Single Core Cable (Isi Marked) 83 1.50 Sq. Mm 84 2.50 Sq. Mm 85 0.50 Sq. Mm 86 1.00 Sq. Mm 87 4.00 Sq. Mm 88 6.00 Sq. Mm 89 Local Timber (Including Fittings—For Doors, Windows, And Furniture) 90 Factory-Made Doors (30 Mm Thick, Solid Core, Single Leaf) 91 Structural Steel 92 Iron (Tor Steel Fe 415/500 For Reinforcement) 93 Binding Wire (18 Gauge) 94 Iron Girders 95 Angle Iron / Square Bars / Flat Strips 96 Barbed Iron Wire (Size: 12 Gauge Wire & 12 Gauge Strand / 12 Gauge Wire & 14 Gauge Strand / 14 Gauge) 97 Iron Wire Mesh (24 Gauge, 14 Mesh) 98 Cement Concrete Jali (Lattice) — 40 Mm Thick 99 Glass 100 Glass (3 Mm Thick) 101 Paints / Colors 102 Enamel Paint 103 Distemper (Water-Bound) 104 Lime — For Whitewashing (Aras / Kali) 105 Primer (For Iron / Wood) 106 Petroleum Products 107 Diesel (Hsd) 108 Mobil Oil 109 Bitumen Shalitex Board (25 Mm Thick) 110 Plain Sheet (Flat Metal Sheet) 111 G.I. Sheet (22 Gauge / 0.80 Mm) 112 G.I. Sheet (24 Gauge / 0.63 Mm) 113 M.S. Sheet (22 Gauge / 0.80 Mm) 114 M.S. Sheet 24 Gauge (0.63 Mm) 115 Corrugated Sheet 116 G.I. Sheet 1 Mm Thick 117 G.I. Sheet 22 Gauge (0.80 Mm) 118 Asbestos Cement Sheet 6 Mm (2.5/2.75 X 1 M) 119 Other Sheets 120 Pvc Sheet 1 Mm Thick (Colored/Plain) 121 Literoof Expo Sheet (Green/Yellow) (183 X 90) 122 G.I. 15 Mm Diameter (B Class) 123 G.I. 20 Mm Diameter (B Class) 124 G.I. 25 Mm Diameter (B Class) 125 A.C. 75 Mm Diameter 126 A.C. 100 Mm Diameter 127 Pvc 90 Mm Diameter (With Ring) 128 Pvc 110 Mm Diameter (With Ring) 129 Pvc 140 Mm Diameter (With Ring) 130 Pvc 110 Mm (2.5 Kg/Sq. Cm) With Coupler 131 Sanitary 132 Indian W.C. 133 Orissa W.C. 134 European W.C. 135 Foot Rest 136 Vitreous China Lip-Type Urinal 430 X 350 X 300 Mm (With Coupling, Bracket, And Pvc) Waste Pipe 137 Wash Basin (450 X 300 Mm) Complete With Coupling, Brackets, And Pvc Waste Pipe 138 Stone Ware (S.W.) Pipe, 100 Mm Diameter, 0.6 M Length 139 C.P. Pillar Cock (15 Mm Dia) (Is Marked) 140 C.P. Bib Cock (15 Mm Dia) (Is Marked) 141 C.P. Grating (Jali), 125 Mm Diameter 142 Rcc Np3 Hume Pipe With Collar 143 1200 Mm Diameter 144 1000 Mm Diameter 145 750 Mm Diameter 146 600 Mm Diameter 147 450 Mm Diameter 148 300 Mm Diameter 149 Steel Conduit (Isi Marked) 150 20 Mm Diameter 151 25 Mm Diameter182 40.00 Mm Diameter 183 Copper Wire 8 Swg (4.00 Mm Diameter) (0.117 Kg/M) 184 Ci/Ms Cover Plate, Attached To The Locking Mechanism Frame 185 Fuel (Including Pol And Operator) 186 Diesel Road Roller (8 To 10 Ton) 187 Sheep Foot Roller 188 Truck (9 Ton) 189 Tractor (25-40 Hp) 190 Tractor With Trolley 191 Tractor With Water Tanker (Capacity: 4000 Liters) 192 Cement Concrete Mixer (5-7 Cubic Feet) 193 Pumping Set (15 Hp) 194 Needle/Plate Vibrator (With Operator) 195 Camel Cart / Bullock Cart (With Driver) 196 Grinding Machine (Large, Motorized) — With Operator 197 Compressor 198 Hydraulic Excavator / Jcb (Bucket Capacity: 0.4 Cu.M) 199 Dumper 200 Tractor With Scraper 201 Shuttering (Wooden Planks) — Including Props And Other Materials 202 Shuttering (Plywood) — Including Props And Other Materials 203 Shuttering (Iron Plates) — Including Props And Other Materials 204 Water And Pumping Charges (For Filling/Curing) 205 Grinding Machine (Small, Hand-Operated) — With Operator 206 Iron Formwork For Well (Dia: 3M, Height: 75Cm) — Including T&P, Installation At Site, And Removal After The Specified Period 207 Cultivator

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 1

Rajasthan View Result →

41.

Public Administrative Department #11294772 Technical Bid

Tender For Supply Of Construction Material Gp Chittodiya-2 Ghadla / Kankar / Jhajhra 3 Mud Mortar / Mud Masala 4 Kiln-Burnt Lime For Lime Masonry Work 5 Cement 6 Ppc (Portland Pozzolana Cement) 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Fly Ash 12 Surkhi (Brick Dust) 13 Stone Dust (For Masonry Work) 14 Stone / Brick Ballast (For Purposes Other Than Road Work) 15 Stone Grit, 40Mm Size (Hand-Broken) (Deduct 1/11 For Voids) 16 Stone Grit, 40Mm Size (Crusher-Broken) (Deduct 1/11 For Voids) 17 Stone Grit, 20Mm Size (Crusher-Broken) 18 Stone Grit, 12/10/6Mm Size (Crusher-Broken) 19 Brick Ballast 20 Materials For Road Work (Including 5 Km Lead) 21 Stone Ballast, 63-40 Mm (Crusher-Broken) (Deduct 1/11 For Voids) 22 Stone Ballast, 63-40 Mm (Hand-Broken) (Deduct 1/11 For Voids) 23 90-45 Mm Hand-Broken Stone Aggregate (Deduct Voids 1/11) 24 Quarry Rubble (Deduct Voids 1/6) 25 Gravel (Deduct Voids 1/6) 26 Kankar (Deduct Voids 1/6) 27 Binding Material (Pi 4-6) (Deduct Voids 1/6) 28 Brick (22.5 X 11 X 7.50 Cm) 29 First Class (I Class) 30 Second Class (Ii Class) 31 Soling / Paving / Masonry Stone 32 Rubble Masonry (Rr) 33 Coursed Rubble Masonry (Cr) 34 Paving Soling (For Flooring Works Up To 15 Cm Height) 35 Paving Soling (For Road/Paving Works Up To 23 Cm Height) 36 Jodhpur-Type Stone Slabs / Arches / Fragments (Length 2-3 Ft, Width 10-12 In, Thickness 2.5-3.5 In) 37 Stone Chips (Flaky Material) (3-4 In Thick; Length And Width 1-2 In) 38 Sandstone (Dpc, Sill, Coping, Lintel, Shelf, Almirah, Etc.) 39 Up To 25 Mm Thickness 40 Up To 25-40 Mm Thickness 41 Up To 40-50 Mm Thickness 42 Up To 50-75 Mm Thickness 43 Up To 75-100 Mm Thickness 44 Up To 100-150 Mm Thickness 45 Flooring / Paving Stone Slabs 46 Flooring Slabs Up To 35 Mm Thick (Min.) Area Of 3 Sq. Ft. Or More 47 Stone Slabs (Katla) For Paving — 60-75 Mm Thickness; Min. Area Of 3 Sq. Ft. Or More 48 Unpolished (Rough) Kota Stone 49 Up To 900 Sq. Cm 50 From 901 To 2300 Sq. Cm 51 Greater Than 2300 Sq. Cm 52 Polished Kota Stone (Polished On One Side) 53 Up To 900 Sq. Cm 54 From 901 To 2300 Sq. Cm 55 Greater Than 2300 Sq. Cm 56 Marble Stone (Makrana Adanga — 20 Mm Thick) 57 Up To 900 Sq. Cm 58 From 901 To 2300 Sq. Cm 59 Greater Than 2300 Sq. Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone (Rajsamand — Ii Quality / Local; 20 Mm Thick) 63 Up To 900 Sq. Cm 64 From 901 To 2300 Sq. Cm 65 Greater Than 2300 Sq. Cm 66 Stone Door Frame 67 Single Rebate — Size: 100 X 75 Mm 68 Double Rebate — Size: 125 X 75 Mm 69 Stone Slabs 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5 M To 2.40 M Length, Minimum 50Mm Thick 72 2.4 M To 3.0 M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles/Brick/Block For Road Work 79 Cement Interlocking Block M-30 Grade, 60Mm Thick 80 Cement Interlocking Block M-30 Grade, 80Mm Thick 81 Cement Interlocking Block M-30 Grade, 100Mm Thick 82 Frpvc Insulated Copper Conductor Single Core Cable (Isi Marked) 83 1.50 Sq. Mm 84 2.50 Sq. Mm 85 0.50 Sq. Mm 86 1.00 Sq. Mm 87 4.00 Sq. Mm 88 6.00 Sq. Mm 89 Local Timber (Including Fittings—For Doors, Windows, And Furniture) 90 Factory-Made Doors (30 Mm Thick, Solid Core, Single Leaf) 91 Structural Steel 92 Iron (Tor Steel Fe 415/500 For Reinforcement) 93 Binding Wire (18 Gauge) 94 Iron Girders 95 Angle Iron / Square Bars / Flat Strips 96 Barbed Iron Wire (Size: 12 Gauge Wire & 12 Gauge Strand / 12 Gauge Wire & 14 Gauge Strand / 14 Gauge) 97 Iron Wire Mesh (24 Gauge, 14 Mesh) 98 Cement Concrete Jali (Lattice) — 40 Mm Thick 99 Glass 100 Glass (3 Mm Thick) 101 Paints / Colors 102 Enamel Paint 103 Distemper (Water-Bound) 104 Lime — For Whitewashing (Aras / Kali) 105 Primer (For Iron / Wood) 106 Petroleum Products 107 Diesel (Hsd) 108 Mobil Oil 109 Bitumen Shalitex Board (25 Mm Thick) 110 Plain Sheet (Flat Metal Sheet) 111 G.I. Sheet (22 Gauge / 0.80 Mm) 112 G.I. Sheet (24 Gauge / 0.63 Mm) 113 M.S. Sheet (22 Gauge / 0.80 Mm) 114 M.S. Sheet 24 Gauge (0.63 Mm) 115 Corrugated Sheet 116 G.I. Sheet 1 Mm Thick 117 G.I. Sheet 22 Gauge (0.80 Mm) 118 Asbestos Cement Sheet 6 Mm (2.5/2.75 X 1 M) 119 Other Sheets 120 Pvc Sheet 1 Mm Thick (Colored/Plain) 121 Literoof Expo Sheet (Green/Yellow) (183 X 90) 122 G.I. 15 Mm Diameter (B Class) 123 G.I. 20 Mm Diameter (B Class) 124 G.I. 25 Mm Diameter (B Class) 125 A.C. 75 Mm Diameter 126 A.C. 100 Mm Diameter 127 Pvc 90 Mm Diameter (With Ring) 128 Pvc 110 Mm Diameter (With Ring) 129 Pvc 140 Mm Diameter (With Ring) 130 Pvc 110 Mm (2.5 Kg/Sq. Cm) With Coupler 131 Sanitary 132 Indian W.C. 133 Orissa W.C. 134 European W.C. 135 Foot Rest 136 Vitreous China Lip-Type Urinal 430 X 350 X 300 Mm (With Coupling, Bracket, And Pvc) Waste Pipe 137 Wash Basin (450 X 300 Mm) Complete With Coupling, Brackets, And Pvc Waste Pipe 138 Stone Ware (S.W.) Pipe, 100 Mm Diameter, 0.6 M Length 139 C.P. Pillar Cock (15 Mm Dia) (Is Marked) 140 C.P. Bib Cock (15 Mm Dia) (Is Marked) 141 C.P. Grating (Jali), 125 Mm Diameter 142 Rcc Np3 Hume Pipe With Collar 143 1200 Mm Diameter 144 1000 Mm Diameter 145 750 Mm Diameter 146 600 Mm Diameter 147 450 Mm Diameter 148 300 Mm Diameter 149 Steel Conduit (Isi Marked) 150 20 Mm Diameter 151 25 Mm Diameter182 40.00 Mm Diameter 183 Copper Wire 8 Swg (4.00 Mm Diameter) (0.117 Kg/M) 184 Ci/Ms Cover Plate, Attached To The Locking Mechanism Frame 185 Fuel (Including Pol And Operator) 186 Diesel Road Roller (8 To 10 Ton) 187 Sheep Foot Roller 188 Truck (9 Ton) 189 Tractor (25-40 Hp) 190 Tractor With Trolley 191 Tractor With Water Tanker (Capacity: 4000 Liters) 192 Cement Concrete Mixer (5-7 Cubic Feet) 193 Pumping Set (15 Hp) 194 Needle/Plate Vibrator (With Operator) 195 Camel Cart / Bullock Cart (With Driver) 196 Grinding Machine (Large, Motorized) — With Operator 197 Compressor 198 Hydraulic Excavator / Jcb (Bucket Capacity: 0.4 Cu.M) 199 Dumper 200 Tractor With Scraper 201 Shuttering (Wooden Planks) — Including Props And Other Materials 202 Shuttering (Plywood) — Including Props And Other Materials 203 Shuttering (Iron Plates) — Including Props And Other Materials 204 Water And Pumping Charges (For Filling/Curing) 205 Grinding Machine (Small, Hand-Operated) — With Operator 206 Iron Formwork For Well (Dia: 3M, Height: 75Cm) — Including T&P, Installation At Site, And Removal After The Specified Period 207 Cultivator

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Rajasthan View Result →

42.

Public Administrative Department #11294771 Technical Bid

Tender For Supply Of Construction Material Gp Gopalpura-2 Ghadla / Kankar / Jhajhra 3 Mud Mortar / Mud Masala 4 Kiln-Burnt Lime For Lime Masonry Work 5 Cement 6 Ppc (Portland Pozzolana Cement) 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Fly Ash 12 Surkhi (Brick Dust) 13 Stone Dust (For Masonry Work) 14 Stone / Brick Ballast (For Purposes Other Than Road Work) 15 Stone Grit, 40Mm Size (Hand-Broken) (Deduct 1/11 For Voids) 16 Stone Grit, 40Mm Size (Crusher-Broken) (Deduct 1/11 For Voids) 17 Stone Grit, 20Mm Size (Crusher-Broken) 18 Stone Grit, 12/10/6Mm Size (Crusher-Broken) 19 Brick Ballast 20 Materials For Road Work (Including 5 Km Lead) 21 Stone Ballast, 63-40 Mm (Crusher-Broken) (Deduct 1/11 For Voids) 22 Stone Ballast, 63-40 Mm (Hand-Broken) (Deduct 1/11 For Voids) 23 90-45 Mm Hand-Broken Stone Aggregate (Deduct Voids 1/11) 24 Quarry Rubble (Deduct Voids 1/6) 25 Gravel (Deduct Voids 1/6) 26 Kankar (Deduct Voids 1/6) 27 Binding Material (Pi 4-6) (Deduct Voids 1/6) 28 Brick (22.5 X 11 X 7.50 Cm) 29 First Class (I Class) 30 Second Class (Ii Class) 31 Soling / Paving / Masonry Stone 32 Rubble Masonry (Rr) 33 Coursed Rubble Masonry (Cr) 34 Paving Soling (For Flooring Works Up To 15 Cm Height) 35 Paving Soling (For Road/Paving Works Up To 23 Cm Height) 36 Jodhpur-Type Stone Slabs / Arches / Fragments (Length 2-3 Ft, Width 10-12 In, Thickness 2.5-3.5 In) 37 Stone Chips (Flaky Material) (3-4 In Thick; Length And Width 1-2 In) 38 Sandstone (Dpc, Sill, Coping, Lintel, Shelf, Almirah, Etc.) 39 Up To 25 Mm Thickness 40 Up To 25-40 Mm Thickness 41 Up To 40-50 Mm Thickness 42 Up To 50-75 Mm Thickness 43 Up To 75-100 Mm Thickness 44 Up To 100-150 Mm Thickness 45 Flooring / Paving Stone Slabs 46 Flooring Slabs Up To 35 Mm Thick (Min.) Area Of 3 Sq. Ft. Or More 47 Stone Slabs (Katla) For Paving — 60-75 Mm Thickness; Min. Area Of 3 Sq. Ft. Or More 48 Unpolished (Rough) Kota Stone 49 Up To 900 Sq. Cm 50 From 901 To 2300 Sq. Cm 51 Greater Than 2300 Sq. Cm 52 Polished Kota Stone (Polished On One Side) 53 Up To 900 Sq. Cm 54 From 901 To 2300 Sq. Cm 55 Greater Than 2300 Sq. Cm 56 Marble Stone (Makrana Adanga — 20 Mm Thick) 57 Up To 900 Sq. Cm 58 From 901 To 2300 Sq. Cm 59 Greater Than 2300 Sq. Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone (Rajsamand — Ii Quality / Local; 20 Mm Thick) 63 Up To 900 Sq. Cm 64 From 901 To 2300 Sq. Cm 65 Greater Than 2300 Sq. Cm 66 Stone Door Frame 67 Single Rebate — Size: 100 X 75 Mm 68 Double Rebate — Size: 125 X 75 Mm 69 Stone Slabs 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5 M To 2.40 M Length, Minimum 50Mm Thick 72 2.4 M To 3.0 M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles/Brick/Block For Road Work 79 Cement Interlocking Block M-30 Grade, 60Mm Thick 80 Cement Interlocking Block M-30 Grade, 80Mm Thick 81 Cement Interlocking Block M-30 Grade, 100Mm Thick 82 Frpvc Insulated Copper Conductor Single Core Cable (Isi Marked) 83 1.50 Sq. Mm 84 2.50 Sq. Mm 85 0.50 Sq. Mm 86 1.00 Sq. Mm 87 4.00 Sq. Mm 88 6.00 Sq. Mm 89 Local Timber (Including Fittings—For Doors, Windows, And Furniture) 90 Factory-Made Doors (30 Mm Thick, Solid Core, Single Leaf) 91 Structural Steel 92 Iron (Tor Steel Fe 415/500 For Reinforcement) 93 Binding Wire (18 Gauge) 94 Iron Girders 95 Angle Iron / Square Bars / Flat Strips 96 Barbed Iron Wire (Size: 12 Gauge Wire & 12 Gauge Strand / 12 Gauge Wire & 14 Gauge Strand / 14 Gauge) 97 Iron Wire Mesh (24 Gauge, 14 Mesh) 98 Cement Concrete Jali (Lattice) — 40 Mm Thick 99 Glass 100 Glass (3 Mm Thick) 101 Paints / Colors 102 Enamel Paint 103 Distemper (Water-Bound) 104 Lime — For Whitewashing (Aras / Kali) 105 Primer (For Iron / Wood) 106 Petroleum Products 107 Diesel (Hsd) 108 Mobil Oil 109 Bitumen Shalitex Board (25 Mm Thick) 110 Plain Sheet (Flat Metal Sheet) 111 G.I. Sheet (22 Gauge / 0.80 Mm) 112 G.I. Sheet (24 Gauge / 0.63 Mm) 113 M.S. Sheet (22 Gauge / 0.80 Mm) 114 M.S. Sheet 24 Gauge (0.63 Mm) 115 Corrugated Sheet 116 G.I. Sheet 1 Mm Thick 117 G.I. Sheet 22 Gauge (0.80 Mm) 118 Asbestos Cement Sheet 6 Mm (2.5/2.75 X 1 M) 119 Other Sheets 120 Pvc Sheet 1 Mm Thick (Colored/Plain) 121 Literoof Expo Sheet (Green/Yellow) (183 X 90) 122 G.I. 15 Mm Diameter (B Class) 123 G.I. 20 Mm Diameter (B Class) 124 G.I. 25 Mm Diameter (B Class) 125 A.C. 75 Mm Diameter 126 A.C. 100 Mm Diameter 127 Pvc 90 Mm Diameter (With Ring) 128 Pvc 110 Mm Diameter (With Ring) 129 Pvc 140 Mm Diameter (With Ring) 130 Pvc 110 Mm (2.5 Kg/Sq. Cm) With Coupler 131 Sanitary 132 Indian W.C. 133 Orissa W.C. 134 European W.C. 135 Foot Rest 136 Vitreous China Lip-Type Urinal 430 X 350 X 300 Mm (With Coupling, Bracket, And Pvc) Waste Pipe 137 Wash Basin (450 X 300 Mm) Complete With Coupling, Brackets, And Pvc Waste Pipe 138 Stone Ware (S.W.) Pipe, 100 Mm Diameter, 0.6 M Length 139 C.P. Pillar Cock (15 Mm Dia) (Is Marked) 140 C.P. Bib Cock (15 Mm Dia) (Is Marked) 141 C.P. Grating (Jali), 125 Mm Diameter 142 Rcc Np3 Hume Pipe With Collar 143 1200 Mm Diameter 144 1000 Mm Diameter 145 750 Mm Diameter 146 600 Mm Diameter 147 450 Mm Diameter 148 300 Mm Diameter 149 Steel Conduit (Isi Marked) 150 20 Mm Diameter 151 25 Mm Diameter182 40.00 Mm Diameter 183 Copper Wire 8 Swg (4.00 Mm Diameter) (0.117 Kg/M) 184 Ci/Ms Cover Plate, Attached To The Locking Mechanism Frame 185 Fuel (Including Pol And Operator) 186 Diesel Road Roller (8 To 10 Ton) 187 Sheep Foot Roller 188 Truck (9 Ton) 189 Tractor (25-40 Hp) 190 Tractor With Trolley 191 Tractor With Water Tanker (Capacity: 4000 Liters) 192 Cement Concrete Mixer (5-7 Cubic Feet) 193 Pumping Set (15 Hp) 194 Needle/Plate Vibrator (With Operator) 195 Camel Cart / Bullock Cart (With Driver) 196 Grinding Machine (Large, Motorized) — With Operator 197 Compressor 198 Hydraulic Excavator / Jcb (Bucket Capacity: 0.4 Cu.M) 199 Dumper 200 Tractor With Scraper 201 Shuttering (Wooden Planks) — Including Props And Other Materials 202 Shuttering (Plywood) — Including Props And Other Materials 203 Shuttering (Iron Plates) — Including Props And Other Materials 204 Water And Pumping Charges (For Filling/Curing) 205 Grinding Machine (Small, Hand-Operated) — With Operator 206 Iron Formwork For Well (Dia: 3M, Height: 75Cm) — Including T&P, Installation At Site, And Removal After The Specified Period 207 Cultivator

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 1

Rajasthan View Result →

43.

Educational and Research Institute #11294668 Price Bid

Tender for Purchase Of Equipments ( S.No 1 To S.No 5 ) For Civil Department , Purchase Of EquipmentS , Sand Replacement Test Apparatus • Metal Tray / Base Platesquare Metal Tray With A Central Hole (E.G., 300 Mm × 300Mm With 100 Mm Hole). • Another Common Size: 450 Mm Square, 50 Mm Deep With 200 Mm Central Hole For Larger Kits Seamless Steel Cylinder With No Sharp Edges. • Common Size: 100 Mm Internal Diameter, 127-175 Mm Length (Varies By Kit). Mkpequipments.Com +1Wall Thickness ~3 Mm (Industrial Products) • Common Size: 100 Mm Internal Diameter, 127-175 Mm Length (Varies By Kit). � Mkpequipments.Com +1 Wall Thickness ~3 Mm (Industrial Products) , Core Cutter • Aim 161 Model Core Cutter: Seamless Steel Tube (Typically 100Mm Id, 130Mm Height, 3Mm Wall Thickness). • Steel Dolly: 25Mm High, 100Mm Id, To Prevent Damage While Driving. • Steel Rammer: For Driving The Cutter. • Tools: Spade, Straight Edge (Knife), Moisture Containers. , Slump Cone Apparatus • 300Mm Ht, Bottom Dia 200Mm, Top Dia 100Mm With Base Plate And Tamping Rod Material Make : Mild Steel , Jar Test Apparatus • Uniform Stirring Of Up To 6 Samples Simultaneously. Stirring Rods Should Be Adjusted Individually During Mixing • Digital Display Which Should Clearly Indicate The Speed Of Rotational Variable Speed 1-200Rpm. Heavy Duty 1/20Hp Motor With Gear Train Mounted On A Mild Steel Housing. • Stainless Steel Stirring Paddlers With Adjustable Height. Paddles To Be Driven By Electronically Controller Variable Speed. • Locking Collars Or Stirring Rods Permit Adjustment Height Of Paddle Height. • Spacing Of 6 (150Mm) Between Stirring Rods So As To Permit Use Up To 1000Ml Beaker. • The Digital Timer To Be Set To Count Down From 1 To 99 Minutes. • Housing Material: Crc / Ms Sheet Duly Powder Coated. • Power Consumption : 220/230V Ac Supply 50Hz Single Phase • Motor : 1/ 20Hp Motor Good Quality Illumination : Built In Illuminator • Beaker : 6 Nos 1000 Ml Beaker 1 , Compression Testing Machine 1000Kn Capacity • Capacity: 1000 Kn • Type: Hydraulic,Floor-Mounted • Accuracy: ±1% Of Indicated Load • Load Application:Smooth, Uniform, Controlled • Platens:Hardened Steel Platens, Suitable For Concrete Cubes/Cylinders • Safety:Overload Protection, Pressure Relief Valve, Emergency Stop, Safety Guard • Standards: Is 516 / Astm / Iso Compliant • Power Supply: 415 V, 3-Phase, 50 Hz • Accessories: Platens,Spacers, Pressure Gauge, Operating Manual • Calibration: Factory Calibrated With Certificate • Installation & Training: Included

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 9

Tamil Nadu View Result →

44.

Public Administrative Department #11290947 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 142

Uttar Pradesh View Result →

45.

Railways #11285375 AOC

Supply Of kit for dye penetrant. , kit for dye penetrant flaw detection in self spray aerosol cans conforming to is: 3658-19 99 (reaffirmed-2020) & is: 12889/2018 (ra-2024), rev 1 of dec. 2018, consisting of (i)cleaner :non-a queous, non-halogenated (ii)dye penetrant:visible dye (red colour), solvent removable (iii)developer: non-aqueous wet type note:- 1.ratio by volume for cleaner, dye penetrant and developer shall be 3:1 :2 2.one kit = cleaner - 3 containers, dye penetrant - 1 container, & developer - 2 containers of 500m capacity each with net content of 400ml. 3.product should be non-toxic, non-corrosive & chemically no n-active to all metals 4.should contain low halide & sulphate contents. 5.should detect surface flaws u pto 1 micron width x 30 micron depth on standard ni-cr test panel 6.products shall have shelf life of 2 years from the date of manufacture 7.firm should give extra guarantee coverage for the products ma nufactured more than two months prior to date of actual supply 8.rate shall be quoted per `kit` only. offers with rates for units other than `kit` will summarily be rejected is: 3658-1999 (reaffirmed-2020) & is: 12889/2018 (ra- 2024), rev 1 of dec. 2018 [ warranty period: 30 months after the date of deli very ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]

Contract Date: Jun 15, 2026 Contract Value : ₹ 1.98 Lakh

Government Departments No of Bidders 1

Tamil Nadu View Result →

46.

Educational and Research Institute #11273270 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Rajasthan View Result →

47.

Educational and Research Institute #11269588 Technical Bid

Tender For Civil Work At Mgsss, Sahawa Block Taranagar- 1 Part A Civil Work 2 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sum On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 3 P.C.C. In Foundation Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Complete In Spcified Grade Excluding The Cost Of Centering And Shuttering All Work Upto Plinth Level 1:4:8(1 Cement:4 Coarse Sand :8 Gradeed Stone Aggregate 40 Mm Nominal Size). 4 Brick Masonry With F.P.S. Bricks Of Class Designation 75 In Foundation And Plinth With Bricks Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) 5 Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways And Removal Of Formwork For Foundation, Footings, Strap Beam, Raft, Bases Of Columns Etc. 6 Providing And Laying In Position Specified Grade Of Cement Concrete For All Rcc Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement M20 Grade Nominal Mix / Design Mix 7 Brick Work With Clay Flyash F.P.S. Brick (Is 13757- 1993 ) Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor Five Level In : Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) 8 Half Brick Work With Mechanised Autoclaved Flyash Lime Bricks Conforming To Is: 12894 :2002 Of Class Designation 100 In Superstructure Above Plinth Level Upto Floor V Level In. C.M.1:4 9 Supplying And Fixing Stone Lintels/Bed Plates Of Approvedquarry Rough Dressed In Cement Mortar 1:4 Upto 15 Cm. Thick: 10 Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Props And Removal Of Formwork For Upto Floor Five Level For :Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping Bed Plates, Anchor Blocks, Sills, Chhajjas, Lintel, Beam, Plinth Beam Etc 11 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding (Including Cost Of Binding Wire) All Complete Up To Floor Five Level. 12 Providing And Laying In Position Specified Grade Of Cement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc.M20 Grade Nominal Mix / Design Mix 13 Stone Kharanja: Random Rubble Dry Stone Kharanja Under Floor 14 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M10 Grade Nominal Mix1: 3: 6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). 15 Providing & Fixing Ist Quality Standard White, Gray, Ivory,Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 And Is: 15622 Of Size 300Mm X 200Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of Tile Complete (Excluding The Cost Of Cement Plaster On Walls And Piller) 16 Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300Mm Confirming To Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4). 17 Door Frames : P & F T- Iron Frames For Doors , Windows And Ventilators Of Mild Steel , Tee Section Joints Mitred And Welded With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Blocks 15X10X10 Cm Of 1:3:6 (1 Cement:3 Fine Sand6 Graded Stone Aggregate 20 Mm Nominal Size:) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required Including Fixing Of Necessary Butt Hinged And Screws And Applying A Priming Coat Of Approved Steel Primer 18 Providing And Fixing M.S. Sheet 1Mm Thick Single Leaf Door Shutter Windows In Angle Iron Frame 35X35X5 Mm Suitabilly Diagonally Braced With 25X3Mm Flat Iron Above And Below Lock Rail Of Size 50X5Mm Beading Extra Including All Fittings, As Per Direction Of Engg. Incharge But Excluding Cost Of Chowkhats: Including Two Coats Of Anit-Corrosive Red Oxide Primer Paint 19 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 (1Cement : 3 - Fine Sand) 20 Internal Plaster :Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished : 12Mm Thick 21 External Plaster : Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished 20 Mm Thick 22 Grading Roof For Water Proofing Treatment Cement Concrete 1: 2: 4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate 20 Mm Nominal Size) 23 Providing And Fixing Steel Glazed Doors Windows Andventilator Shutters Of Standard Rolled Steel Section (Is 1038-1983) Joints Mitred And Welded With Steel Lugs 13X3Mm, 10Cm.Long Embedded In Cement Concrete Block 15X10X10Cm. Of1:3:6 (1Cement : 3 Coarse Sand : 6 Graded Stone Aggregate20Mm Nominal Size) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws With Fixing Clips Or With Bolts And Nuts Asrequired Including Providing And Fixing Of Plain Glass Panes 4Mm Thick With Cooper Glazing Clips And Special Metal Sashputty Of Approved Make Or Metal Beading With Screwscomplete Including Priming Coat Of Approval Steel Primer,Excluding The Cost Of Metal Beading And Other Fitting Exceptnecessary Hinges Of Pivots Steel Handles Peg Stay Etc. Asrequired Partly Fixed And Partly Openable [ Fixed Area Not To Exceed33%] 24 Supplying And Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gaugeto The Metal Frame Of Rolled Section By Metal Beading 20X3Mmwith Suitable Screw At Not Exceeding 150Mm Distance 25 Providing And Fixing Square Bars Or Other Flat Welded To Window, Ventilatiors Etc.12Mm Dia 26 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete 27 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding:New Work (Two Or More Coats) Over And Including Scrapping And Priming Coat With Cement Primer 28 Finishing Walls With Acrylic Smooth Exterior Paint Of Requiredshade Including All Scaffolding.New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Overand Including Base Coat Of Water Proofing Cement Paint Applied@ 2.20 Kg/ 10 Sqm ). 29 Panting On Doors & Windows :- Painting With Syntheitic Enamel Paint Of Approved Brand And Manufacture In All Shade To Give An Even Shade New Steel Work (2 Or More Coat On New Work). 30 Copping: Cement Concrete Flooring 1:2:4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate) Finishing With A Floating Coat Of Neat Cement Including Cement Slurry, Making Of Lines Or Groove Etc. Complete But Excluding The Cost Of Nosing Of Steps Etc. Complete : 40Mm Thick With 20Mm Thick Nominal Size Aggregate. 31 Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles Including Rubbing And Cleaning Etc. Complete On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Light Shade Using Shade Cement.P 32 Part B Sanetary Work 33 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Concealed Work Including Cutting Chases And Making Good The Walls Etc.,)20Mm Nominal Outer Dia Pipes 34 25 Mm Nominal Outer Dia Pipes 35 P & F Indian Type White Glazed Vitreous China 1St Quality W.C. Orissa Pan (Is :2556 Mark) With 100 Mm Vitreous China P Or S Trap Including Cutting And Making Good The Wall And Floor: Size 530*410Mm 36 Providing & Fixing Premium Qulaity Wvc Urinal With Pvc Waste Pipe, Dome Couplings, Concealed Iron Brackets Or Screws Etc. Complete Mini Stall Size 455*385*350 Mm. 37 P & F W.V.C. (Is: 2556 Mark) Squatting Urinal Of Standard Make Complete. Including Cutting & Making Good The Floor:. Size 450X350Mm 38 P & F Wvc Wash Basin (1St Quality, I.S. : 2556 Mark) Of Approved Make With C.I. Brackets Duly Painted, 1 No. 15 Mm C.P. Pillar Cock (Is : 8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make,25 Mm G.I. Waste Pipe Complete Including Cutting & Making Good The Wall.: 450 X 300 Mm 39 P & F Bib Cock (Is : 8931 Mark) Superior Quality Of Approved Make.C.P. Brass 400 Gm, 15 Mm Nominal Bore. 40 P & F Inlet Connection (Angle Valves) Superior Quality Of Approved Make C.P. Intel Connection 15 Mm Brass (Is : 8931) 41 P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia 42 P & F Low Level Flushing Cistern Of 10 Litres Capacity (Is : 2556Mark). Of Approved Make With Complete Fittings C.I. Brackets Duly Painted, Brass Ball Cock With Ball, (Is: 1703 Mark) Complete Including Cutting And Making Good The Wall:Pvc With Pvc Bend And Superior Internal Fittings As Per Is :7231 43 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Bend 87.5 110Mm Dia 44 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant Plain Floor Trap 110 Mm Dia 45 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant P-Trap 110 Mm Dia 46 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant Vent Cowel 110 Mm Dia 47 S/F Rcc Main Hole Covers With Frame Of Approved Make (Light Duty) Size 450X450 Mm 48 P/F Grating Of Approved Quality Stainiese Steet Sheet Size 125 Mm Dia 49 Construction Of Soakage Well In All Types Of Soil Of Approved Drawing , Top 90 Cm Portion In 450 Mm Thick With Cement Mortar 1:6 80 Mm Stone Slab Covering Jointing Of Slab In Cm 1 : 3, Ralthal, Kharanja, 40 Mm Thick M-15 Grade C.C. Flooring Earthwork Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr.Inner Dia 90 Cm & 10 To 12 M Deep 50 Construction Of Chamber In All Types Of Soil With 300 Mm Thick Masnory In Cm. 1 : 6, 100 Mm Thick C.C. 1 : 5 : 10 In Foundation , 20 Mm Thick Inside Plaster In Cm 1 : 6, Finished With Floating Neat Cement 50 Mm Thick M-15 Grade C.C. Flooring Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr.Inside Size 450 X 450 Mm Depth Upto 0.5 M & 5 Kg Ci Cover With Frame. 51 P & F Ball Cock (Is : 1703 Mark) With Rod & P.V.C. Ball Complete.Brass Wt. 300 Gm, 15 Mm 52 P & F 15 Mm Dia Connection Pipe Of Approved Quality Make Pvc Pipes With Nuts 450 Mm. 53 P & F Stop Cock (Is:8931 Mark),Superior Quality And Of Approved Mark: Brass 400 Gm. 15 Mm Nominal Bore 54 P & F Pvc Storage Tank Isi Marked ( Is : 12701) Indicating The Bis License No. Of Approved Make With Cover , 25Mm Dia 1 M Long G.I. Overflow Pipe & 25 Cm Long Wash Out Pipe With Plug & Socket Including Making Connection Etc. Complete Of Approved Design 500 Litres Capacity 55 Construction Of Septic Tank In All Types Of Soil With 40 Cm .Thick Masonry In Cm 1:6, 15 Cm Thick C.C Bed Of 1:5:10, M- 15 Grade C.C Floor & Rcc Slab Covering With M15 Grade C.C. Floor, 50 Mm Thick Stone Slab Partition Walls, 20 Mm Thickplaster In Cm 1:6 Finished With Neat Floating Cement, 4 Nos Foot Rests Of Approved Design ,Two No. 450 Mm Dia Eachferro Cement Cover With Frame, Earth Work Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earthwithin A Lead Of 50 Mtr:-Size 200X100X130 Cm.(For 10 Users) With 115 Mm Thick Rcc(M-20) Slab With Tor Steel Reinforcement 8Mm Φ @15 Cm C/Cbothways Including Shuttering Complete In All Respe 56 Part C Electrical Work 57 Wiring Of Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade (Is:694) And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & ItS All Accessories( J.B. , Bends Etc.) , Round Tiles,18 Swg Hot Dipped Galvanized Modular Box With Earth Terminal, 6 A Modular Switch, Modular Face Plate With Grid Plate, 3 Pin Ceiling Rose / Lamp Holder/ 3 Pin Connector , Screws Etc, Making Connections,All As Per Pre Approved By Engineer In Charge, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 . For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 58 Short Point (Up To 3 Mtr.) 59 Medium Point (Up To 6 Mtr) 60 Long Point (Up To 10 Mtr) 61 Wiring Of 3/5 Pin 6 Amp. Light Plug Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade (Is:694) And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & ItS All Accessories( J.B. , Bends Etc.) , Round Tiles,18 Swg G.I. Box With Earth Terminal Of Required Size, 6 A Switch, 3/5 Pin 6 A Socket, 3.0 Mm Thick Isi Marked Phenolic Laminated Sheet (Is : 2036 - 1995), Al. Alloy/ Cadmium Plated Iron Screws 20 Mm Cup Washers Etc. All As Per Pre Approved By Engineer In Charge, Making Connections, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 62 On Board 63 S&F Following Sizes (Dia.) Of Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit As Per Pwd Specification For Electrical Works Along With Its Accessories (Is: 3419 ) As Required In Recess Including Cutting The Wall, Covering Conduit And Making Good The Same As Required. All Relative And Latest Acceptance Tests Reports By Any Nabl Accredited Lab For The Conduit Shall Be Submitted Before Execution & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 64 25 Mm Dia 65 Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.99% Purity Copper, Class 5 Stranding In Acc. To Iec 60228 For Lower Watt Loss , Oxygen Free ( 66 2 X 1.5 Sq. Mm 67 2 X 2.5 Sq. Mm

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Rajasthan View Result →

48.

Tourism #11266721 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Goa View Result →

49.

Rural Development #11259071 AOC

Contract Date: Jun 10, 2026 Contract Value : ₹ 27.46 Lakh

Government Departments No of Bidders 7

Odisha View Result →

50.

Railways #11256024 AOC

Supply Of heavy compacted grease and carbon , heavy compacted grease and carbon aqueous cleaners metal safe and user friendly biodegra dable as per product no. z113 biogenic se372 of m/s. stanvac or 2702 stripex of m/s. super on or 297 big blue of m/s. corrium only. material to be procured directly from oem or their authorized dealer with tender specific authorization from oem. [ warranty period: 30 months after the date of delivery ] ]

Contract Date: Jun 10, 2026 Contract Value : ₹ 2.23 Lakh

Government Departments No of Bidders 1

Maharashtra View Result →

TenderDetail

Loading tenders