View Bid Results For Manufacturing Services Tenders

We found 1813 Bid Results related to manufacturing services tenders. You can find Contractor details who won manufacturing services tenders along with contract details in Bid awards announcements section.

Filters
Stage
1558
170
85
Tender Publishing Platform
943
870
State / UT
32
538
244
148
111
77
73
64
59
45
45
42
41
41
38
33
32
32
27
21
19
14
13
12
11
11
8
6
3
2
1
1
1
Contract Value
363
527
627
291
Publish Date
6
0
0
0
0
Sector
30
494
186
170
162
150
126
98
88
83
45
41
24
21
19
16
14
14
13
13
11
7
4
4
3
2
1
1
1
1
1
Ownership
7
827
396
395
153
34
6
2
Within keyword
Active filters:
Showing 1–37 of 1813 tenders matching your filters
Contract Date: Ref. Documents Contract Value : 8.58 Lakh
Boards / Undertakings / PSU No of Bidders 4
Contract Date: Ref. Documents Contract Value : 44.30 Lakh
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 12.79 Lakh
Boards / Undertakings / PSU No of Bidders 4
Contract Date: Ref. Documents Contract Value : 3.18 Lakh
Government Departments No of Bidders 3
Contract Date: Ref. Documents Contract Value : 55.81 Lakh
Boards / Undertakings / PSU No of Bidders 3
Contract Date: Ref. Documents Contract Value : 1.49 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
13.
Railways #11404973 AOC
Supply Of Eot Crane 50/10 Ton Capacityeot Crane 50/10 Ton Capacity,Cost Of Electric Over Head Travelling Crane Capacity -50/10 Ton With Remote Control And Ds L Length Of 140 Mts And All Spares And Accessories As Per Detailed Technical Specification Enclosed. [ Wa Rranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessories Treated As Concomitant Accessories. ] , Camc Charges For 5 Years After Completion Of Warranty Period. Refer Respective Bid Docume Nt. [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/Els/Ajj, Sr Tamil Nadu 1.00 Numbers 4 6579Ns02 Essential Non Stock --- Yes Tpi Agency Inr (Grp1) Spares (Y) Cost Of Dsl (Type And Length Of Dsl As Specified In Schedule-L) ] Consignee Sse/Els/Ajj, Sr Tamil Nadu 1.00 Set Inspection Details Stage Inspection Not Required Page 1 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 5 6579Ns03 Essential Non Stock --- Yes Tpi Agency Inr (Grp1) Spares (Y) Cost Of Spares As Per Schedule-Iv & Additional Spares And Items As Specified In Schedule-I. ] Consignee Sse/Els/Ajj, Sr Tamil Nadu 1.00 Set Inspection Details Stage Inspection Not Required 6 6579Ns04 Essential Non Stock --- Yes Tpi Agency Inr (Grp1) Spares (Y) Cost Of Maintenance Tools As Per Schedule-V ] Consignee Sse/Els/Ajj, Sr Tamil Nadu 1.00 Set Inspection Details Stage Inspection Not Required 7 6579Ser1 Essential Non Stock --- Yes Consignee Inr (Grp1) Services (Y) Cost Of Installation & Commissioning Of Crane And Dsl (Length Of Dsl As Specified In Schedule -L). ] At (Location) Sse/Els/Ajj, Sr Tamil Nadu 1.00 Numbers 8 6579Ser2 Essential Non Stock --- Yes Consignee Inr (Grp1) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/Els/Ajj, Sr Tamil Nadu 1.00 Numbers 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 4 Months Of Issue Of Contract, However, Delivery Completion : Within 6 Months Thereafter Period Shall Not Exceed No. Of Days As Mentioned In Delivery Schedule Chart Of Para 7 Of Section Iv Of Respective Bid Document Part Ii. However, The Delivery Period Indicated Being Tentative, May Vary At The Time Of Placement Of Order. Payment Terms S.No Description Payment Terms 1 1) 60% Payment: Upon Receipt Of The M&P, Duly Pre-Inspected By A Third -Party Inspection (Tpi) Agency, Receipted At The Site By The Consignee In Good Condition And Submission Of A Joint Receipt Note. 2) 20% Intermediate Payment: After Successful Installation And Commissioning And Submission Of A Joint Commissioning Note. 3) Final 20% Payment: After Commissioning Of The M&P At The Consignees End For A Minimum Period Of 30 Days, Upon Submission Of A 10% Warranty Bank Guarantee And A Proving Test Certificate Statutory Variation Clause S.No Description Page 2 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassiï¬Cation By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 The Bidder Agrees To Supply The Tendered Stores At The Rates Quoted By Him In Accordance With The Latest Version Of Irs Conditions Of Contract (Attached As Irs Conditions Of Contract To This Tender Document For Ready Reference) And Southern Railway Tender Conditions (Attached As Sr Tender Conditions To This Tender Document For Ready Reference). 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Supply To Be Strictly As Per Speciï¬Cations Normal Applicable To Yes Yes Not Allowed Documents Uploaded With This Tender. All Bidders Please Refer Bid Document Part Ii. 2 The Bidder / Manufacturer Should Have Normal Applicable To Yes Yes Allowed Supplied At Least 3 (Three) Eot Cranes All Bidders (Mandatory) During The Last 5 (ϬVe) Years (Reckoned From The Original Closing Date Of The Tender) In The Contracts Concluded By Railways / Cofmow. 3 Preferably Manufacturers Should Normal Applicable To Yes Yes Allowed Participate. Participating Traders/Agents All Bidders (Optional) Must Attach Authorization Letter Issued By The Oem Or Oem Authorized Stockiest Along With Their OffEr. Authorization Letter Should Preferably Be Tender Speciï¬C. In Case Of General Authorization Letter, It Must Clearly Indicate The Validity Period/Expiry Date. OffErs With General Authorization Letter Silent On Validity Period/Expiry Date Will Not Be Considered For Placement Of Order And That OffEr Is Liable To Be Ignored. (Please Refer Para 3.4 Of Part B Of Sr Tender Conditions). 4 Procurement Of The Item Is Restricted To Normal Applicable To Yes Yes Not Allowed Local Suppliers With Minimum Local All Bidders Content Of 20% (Class-I Or Class-Ii Local Supplier As Deï¬Ned In Railway Board Letter No.2020/Rs(G)/779/2/Pt.1 Dated 25.09.2020 With Latest Amendments, If Any) Only And The Vendors Who Do Not Qualify To Be Local Suppliers (I.E.), Non- Local Suppliers With Local Content Less Than 20%) Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Local Supplier For The Tendered Item Participates In The Tender, It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. OffEr Of The ϬRm Shall Be Summarily Rejected In Case Of Non-Compliance Of Above Declaration. For More Details, The Tenderer Shall Refer Para 16.0 Of Part B Of Sr Tender Conditions Attached To This Tender Document. Page 3 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 5 Earnest Money Deposit (Emd) Shall Be Normal Applicable To Yes Yes Not Allowed Deposited By All Vendors For Tenders With All Bidders Estimated Value Above Rs.25 Lakhs Subject To The Applicable Exemptions. The Para 2.1 Of The Part A Of Sr Tender Conditions With Regard To Emd Exemption Is Superseded As Below And The Conditions Mentioned Here Below Will Prevail Over That Of In Para 2.1 Of The Part A Of Sr Tender Conditions Attached To This Tender Document: Emd Amount Shall Be Mentioned In All Tenders Irrespective Of The Nature Of Tender As Per The Emd Amount Mentioned In Clause 2.3 Of Part A Of Sr Tender Conditions Or As Decided By The Purchaser Under The Policy. There Shall Be No Exemption From Submission Of Emd For Any Tender Or By Any Tenderer Subject To Provisions Under Clause 10.4.3 Of Part A Of Sr Tender Conditions Except Following : (I) Emd Shall Normally Not Be Called Against Tenders With Estimated Value Up To Rs.25 Lakhs (Including Single Tenders, Global Limited Tenders) Except Cases Where Competent Authority Incorporates The Condition To Call For Emd. Ii) Public Sector Undertakings (Psus) A. Psus Owned By Ministry Of Railways And B. Psus For The Group Of Items That Are Manufactured By Them. Iii) Mses Registered Under Udyam Registration Shall Be Eligible For Exemption From Payment Of Emd Irrespective Of Relevance Of Product Category For Which They Are Registered With Udyam. However, Traders/Distributors/Sole Agent/Works Contract Are Not Exempted From Payment Of Emd As They Are Excluded From The Purview Of The Policy. Iv) Other Railways, Indian Ordinance Factories And Govt. Departments. V) In Exceptional Cases, Where Emd Exemption Is Speciï¬Cally Incorporated In Tender Conditions. Vi) Vendors Registered With Southern Railway For The Trade Group/Trade Groups Of The Tendered Item . Vii) Regular And Development Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus/ Core Etc., For Those Speciï¬C Item For Which They Are On The Approved List, Subject To Approval Status Being Valid On The Date Of Tender Closing. Viii) Vendors Registered With Railways For Supply Of Medicine, Medical Equipments And Consumables Shall Be Exempted From Submission Of Emd For These Items. Ix) In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued Shall Be Exempted From Submitting Emd. Kvic And Acash Shall Be Exempted From Emd For Items Supplied By Them. In Case Of Submission Of Earnest Money Deposit In The Form Of Bank Guarantee, Please Refer Annexure- 6 Of Sr Tender Conditions For The Proforma For Bg. Page 4 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 6 All The Tenderers Shall Have To Submit Normal Applicable To Yes Yes Allowed Clause-Wise Compliance Of Speciï¬Cation All Bidders (Mandatory) Mentioned In Bid Document Part I & Part Ii (A&B) And Drawings Enclosed Along With This Tender Or Product Catalogue For The Make And Model OffEred Should Be Submitted By The Tenderer, Spelling Out Deviations, If Any, To Ascertain Technical Suitability. An OffEr, Whose Technical Suitability Cannot Be Ascertained, May Be Liable To Be Ignored. 7 Inter - Se Position Of Offers Would Normal Applicable To Yes Yes Not Allowed Be Determined Based On The Sum Of All Bidders Basic Cost Of The Equipment, Cost Of Any Other Accessories Treated As Concomitant Accessory, Cost Of Dsl, Cost Of Spares As Per Schedule - Iv Of And Additional Spares And Items As Specified In Section I, Cost Of Maintenance Tools As Per Schedule V, Cost Of Installation & Commissioning Of Crane And Dsl,Cost Of Preventive Maintenance For 2 Years And Camc Charges For 5 Years After Completion Of Warranty Period. 8 Firms Have To Quote All The Line Items. It Is Normal Applicable To Yes Yes Not Allowed Mandatory To Submit OffErs Against All All Bidders These Items, Otherwise OffEr Will Not Be Considered For Inter-Se Ranking. However, Please Note That Cost Of Optional Accessories Shall Not Be Included In The Basic Price Of The Machine For Inter-Se Ranking. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Quoted Cost Of Basic Machine, Normal Applicable To No No Not Allowed Concomitant Accessories/Equipment, All Bidders Essential Spares, Optional Accessories,Essential Services, Amc Service, Training Etc. It Is Mandatory To Submit OffErs Against All These Items, Otherwise OffEr Will Not Be Considered For Inter-Se Ranking. 2 Have You Attached Documents To Prove Normal Applicable To No No Not Allowed Your Eligibility And Past Performance As All Bidders Per Tender Requirement? 3 Have You Attached Certiï¬Cation Of Local Normal Applicable To No No Not Allowed Content From Statutory Auditor/ Cost All Bidders Accountant? 4 Have You Quoted Warranty Oblications As Normal Applicable To No No Not Allowed Per Tender Requirement? All Bidders 5 Have You Quoted Delivery Period Correctly Normal Applicable To No No Not Allowed And Precisely? All Bidders 6 Have You Uploaded Annexure A As In Normal Applicable To No No Not Allowed Section Vi And Other Required Documents, All Bidders Complete In All Respect? 7 Have You Submitted All Supporting Normal Applicable To No No Not Allowed Documents Required? All Bidders Page 5 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 8 Have You Read The Security Deposit (Sd) Normal Applicable To No No Not Allowed Condition At Para 10 Of Part A Of Sr All Bidders Tender Conditions Attached With This Tender Document And Uploaded Relevant Document For Seeking Exemption From Submission Of Sd? If Not, Are You Ready To Pay Security Deposit? 9 Are You Coming Under Mse Status Given Normal Applicable To No No Not Allowed As Per Guidelines Issued By Railway Board All Bidders For Purchase Preference Vide Letter No. 2010-Rs [G] -363-1 Dt. 05.07.2012 Or Latest. If Yes,Have You Attached Valid Documents (Udyam Registration Certificate) Towards Being Mse? 10 Have You Furnished The Statement Of Normal Applicable To No No Not Allowed Deviations?[Preferably Nil] All Bidders 11 Have You Quoted The Discount If Any In The Normal Applicable To No No Not Allowed Specified Column Only In Ireps? All Bidders 12 Have You Furnished Bank Account Details Normal Applicable To No No Not Allowed Such As Name Of The Bank And Address, All Bidders Account No., Micr, Ifsc Code And Type Of Account To Facilitate Eft Payment? 13 Please Check Our Website Before Normal Applicable To No No Not Allowed Submitting OffEr, Whether Any All Bidders Corrigendum To The Tender Has Been Issued Or Not. 14 Firm To Indicate Make-Model-Brand Normal Applicable To No No Not Allowed Offered, If Any. All Bidders 15 Have You Kept Your OffEr Valid For 120 Normal Applicable To No No Not Allowed Days? All Bidders Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 In Case Of Road Delivery, The Date Of Normal Applicable To Yes Yes Not Allowed Delivery At Destination [Consignees End] All Bidders Shall Only Be Treated As Delivery Date Irrespective Of F.O.R. / F.O.T. Condition Mentioned Elsewhere In The Contract / Tender. 2 Tenderers May Note That Their OffEred Normal Applicable To Yes Yes Not Allowed Delivery Schedule Should Clearly Indicate All Bidders The Starting Time, Quarterly Rate Of Supply And ϬNishing Time. For OffErs With Vague Delivery Schedule Like -02 To 12 Months- Or Like -06 To 10 Months-, Delivery Period Shall Be Given As Per The Requirement Best Suited To This Oï¬Ƒce Within The Quoted Range. 3 The Bidder Conï¬Rms That Rates And Other Normal Applicable To Yes Yes Not Allowed ϬNancial Terms Quoted In Relevant All Bidders Columns Of ϬNancial Bid Will Only Be Ruling Terms For Acceptance, And Such Terms Quoted Anywhere Else Should Be Ignored. However, Break Up Of Cost Of Individual Items As Per Schedule- Iv And Additional Spares And Items As Speciï¬Ed In Schedule- L Is To Be Attached Separately. If Break-Up Of Cost List Is Not Uploaded, Whole Offer Will Be Ignored. Page 6 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 4 Whenever Tender Is Ϭ‚Oated With Purchase Normal Applicable To Yes Yes Not Allowed Restriction From Sources Approved By All Bidders Nominated Authorities And There Exists A Suspected Cartel Situation By Approved Sources Or The Rates Available From Approved Source/Sources Are Adjudged Unreasonably High, Despite Fair EffOrts As Permissible, The Purchaser Reserves The Right To Place Orders On ϬRm(S) Outside The Approved Vendor List, Without Any Restrictions.(Please Refer Para 4.0 Of Part B Of Sr Tender Conditions Document Attached To This Tender Document For Further Details.) 5 Hsn Code 8426 Normal Applicable To Yes Yes Not Allowed [A] All The Bidders/Tenderers Should Ensure All Bidders That They Are Gst Compliant And Their Quoted Tax Structure/Rates Are As Per The Gst Law. Firms Must Indicate Its Gst Registration Number Along With Their Offer. [B] In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Igst /Utgst/Sgst Act, The Railway Shall Deduct The Applicable Gst From His/Their Bills Under Reverse Charge Mechanism (Rcm) And Deposit The Same To The Concerned Tax Authority. [C] The ϬRm Should Indicate The Tariff Code (Hsn Code) For Claiming Gst For The Tendered Item. [D] The OffEr Shall Be Evaluated Based On The Gst Rate As Quoted By Each Bidder And Same Will Be Used For Determining The Inter-Se Ranking. While Submitting OffEr, It Shall Be The Responsibility Of The Bidder To Ensure That They Quote Correct Gst Rate And Hsn Number. [E] It Shall Be The Responsibility Of The Bidders To Quote Correct Hsn Number And Corresponding Gst Rate. The Purchaser Shall Not Be Responsible For Any Misclassiï¬Cation Of Hsn Number Or Incorrect Gst Rate, If Quoted By The Bidder. [F] Wherever, The Successful Bidder Invoices The Goods At Gst Rate Or Hsn Number Which Is DiffErent From That Incorporated In The Purchase Order, Payment Shall Be Made As Per Gst Rate Which Is Lower Of The Gst Rate Incorporated In The Purchase Order Or Billed. [G] Vendor Is Informed That She/He Would Be Required To Adjust Her/His Basic Price To The Extent Required By Higher Tax Bill As Per Invoice To Match The All Inclusive Price As Mentioned In The Purchase Order. [H] Any Amendment To Gst Rate Or Hsn Number In The Contract Shall Be As Per The Contractual Conditions And Statutory Amendments In The Quoted Gst Rate And Hsn Number, Under Svc. 6 Please Refer Para 15.0 Of Part - B Of Sr Normal Applicable To Yes Yes Not Allowed Tender Conditions Attached With This All Bidders Tender Document For Details Regarding Benefits Of Mse As Per Public Procurement Policy. 7 For Public Procurement (Preference To Normal Applicable To Yes Yes Not Allowed Make In India) Policy, Please Refer Para All Bidders 16.0 Of Part- B Of Sr Tender Conditions Attached To This Tender Document. Page 7 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 8 Bidder Shall Accept The Following Normal Applicable To Yes Yes Allowed Declaration [Land Border Condition] By All Bidders (Mandatory) Quoting Yes Against Conf. Allowed Or Complied Column For Compliance Of Oï¬Ƒce Memorandum Of Department Of Expenditure, Ministry Of Finance Om No. F.No.6/18/2019-Ppd Dated 23.07.2020. If Such Certiï¬Cate Given By A Bidder Whose Bid Is Accepted Is Found To Be False, This Would Be A Ground For Immediate Termination And Further Legal Action In Accordance With Law. I/We Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India. I/We Certify That This Bidder Is Not From Such A Country Or , If From Such A Country, Has Been Registered With The Competent Authority. I/We Hereby Certify That This Bidder, Fulfills All Requirements In This Regard, And Is Eligible To Be Considered. (Where Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached.) 9 1) Bidders Are Instructed Not To Indulge In Normal Applicable To Yes Yes Not Allowed Any Anti-Competitive Practices. As Per The All Bidders Provisions Of Competition Act,2002, Railways Can Make A Reference To The Competition Commission Of India For Making An Enquiry In Case Of Suspected Anti Competitive Behavior By The Bidders. 2) Collusive Bidding, Bid Rotation, Bid Suppression, Complementary Bidding, Market Allocation And Sub-Contracting Arrangements Fall Under The Purview Of Bid Rigging Which Would Cause Appreciable Adverse EffEct On Competition. 3) Competition Commission Of India Can Impose Heavy Penalties Such As: Penalty Upto 10% Of The Average Turnover For The Last Three Preceding ϬNancial Years Upon Each Of Such Enterprises Which Are Parties To Bid-Rigging And Can Even Order The Parties To Cease And Desist. 10 A) For : Destination. By Road. Normal Applicable To Yes Yes Not Allowed Accordingly, The ϬRms Are Advised To All Bidders Quote On For Destination Basis By Road And Offers With Deviations Are Liable To Be Ignored. B) Door Delivery Shall Be Made To The Consignees Along With Delivery Challan Postal Address Of The Consignee Is: Electric Loco Shed, Arakkonam, Southern Railway Chennai: 631001. Tamilnadu. Southern Railway Gst No. 33Aaagm0289c1zq. Page 8 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 11 Failure Consequences: In Case The ϬRm Normal Applicable To Yes Yes Not Allowed Fails To Execute The Contract Within The All Bidders Original Delivery Period, The Purchaser Will Be Entitled To Impose Liquidated Damages For Extension Of Delivery Period. For Any Reason, If The Supplier Fails To Supply Goods And/Or Service As Per The Conditions Of Contract, As Amended From Time To Time, Purchaser Shall Have The Right To Levy Damages From The Supplier For Failing To Comply With The Contractual Conditions, Not By The Way Of Penalty, An Amount Equal To Security Deposit Of The Defaulted Order Amount. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 12 Tenderers To Acknowledge Having Read Normal Applicable To Yes Yes Not Allowed And Also Accept The Irs Conditions Of All Bidders Contract, Sr Tender Conditions, Special And Other Conditions Speciï¬Ed In This Tender Document/Attached To This Tender Document. Page 9 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 13 Security Deposit Shall Be Taken From All Normal Applicable To Yes Yes Not Allowed Vendors For Contract Value Above Rs.25 All Bidders Lakhs. Security Deposit Is 5% Of Total Value Of Contract Subject To Max Rs. 50 Lakhs For Contract Value Above 25 Lakhs And Up To Rs.50 Crore. Subject To The Applicable Exemptions. Security Deposit From Successful Tenderers Should Be Received In Purchase Oï¬Ƒce Within 21 Days From The Date Of Communication Of Acceptance With Respect To The Purchaser. There Shall Be No Exemption From Submission Of Security Deposit For Any Tender Or By Any Tenderer Except Following: A) The Store Contract Cases Of Value Upto Rs.25 (Twenty Five) Lakh, B) Other Railways And Government Departments In Terms Of Railway Boards Letter No. 2004/Rs(G)/779/11 Dated 24.07.2007 C) Indian Ordinance Factories In Terms Of Railway Boards Letter No.92/Rss(G)/363/1 Dated 08.04.1993 D) Psus Owned By Ministry Of Railways And Psus For The Group Of Items That Are Manufactured By Them In Terms Of Railway Boards Letter No.2003/Rs(G)/779/5 Dated 10.09.2004 E) In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued Shall Be Exempted From Submitting Sd. Kvic And Acash Shall Be Exempted From Sd For Items Supplied By Them. F) Vendors Registered With Railways For The Trade Group Of The Item Tendered Shall Be Exempted From Sd For Orders Valued Up To Their Monetary Limit Of Registration. G) Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus Core Subject To Approval Status Being Valid On The Date Of Tender Closing H) Vendors Registered With Railway For Supply Of Medicine, Medical Equipments And Consumables Shall Be Exempted From Submission Of Sd For These Items. (Please Refer Para 10.0 Of Part A Of Sr Tender Conditions Enclosed To This Tender Document For Further Details On This Clause). Page 10 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 14 (A) Free Delivery To Consignee. Supply Of Normal Applicable To Yes Yes Not Allowed Machine Shall Be Made As Per The All Bidders Milestone Chart Given In Sl .No.7 (Delivery Schedule Chart) Of Technical Speciï¬Cation Enclosed. (B) Bill Payment: After Successful Completion Of Purchase Order, ϬRm Has To Submit The Bill On-Line Through Ireps Portal Only For Payment. In This Regard, The Following Documents Have To Be Uploaded Based On The Crn (R-Note) Issued By Railway (A) Invoice, Gst Declaration( I.E.Self Declaration Regarding Aggregate Annual Turnover In A ϬNancial Year: Less (Or) More Than 50 Crores / Less(Or) More Than 100 Crores/Less (Or) More Than 500 Crores. If More Than 500 Crores, E-Invoice Is Required To Be Uploaded.), Rnote, Neft Mandatory. (B) Warranty/Guarantee Certiï¬Cate, Rites Certiï¬Cate, Test Report, Dealership Certiï¬Cate (Or) Proof Of Purchase From Authorized Dealer, Calibration Certiï¬Cate, Commissioning Report Whichever Is Applicable. 15 Packing Instructions: Use Re-Usable Steel Normal Applicable To Yes Yes Not Allowed Cage (Or) Wooden Box (Or) Gunny Bags All Bidders (Jute Bags) (Or) Carton Box (Or) Polythene Bags>50 Micron Only And Use Railway Parcel Transportation. Please Refer Para 1400 Of Section I Of Bid Document Part I. 16 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Railway Is Not Bound To Accept The Lowest Normal Applicable To No No Not Allowed Or Any Tender Or To Assign Any Reason For All Bidders Doing So And Railway Reserves The Right To Accept/Cancel Any Tender In Respect Of The Whole Or Any Portion Of The Items Specified In The Schedule Annexed (Or Tender Schedule) And The Contractor Shall Be Required To Supply The Same At The Rate Quoted. 2 1. For Any Queries Against This Tender, Normal Applicable To No No Not Allowed Please Contact Dycmm/Ic/Sr At All Bidders 9003060762. 2. Any Technical Clariï¬Cation Regarding Drawing/Speciï¬Cation Can Be Obtained From The Oï¬Ƒce Of The Pcme/Sr/Mas. Dy.Cme/Planning/Mas Mobile No. 9003060403 And Mail Id [email protected]. Drawing (S) / Speciï¬Cation (S) Can Also Be Obtained From The Above Oï¬Ƒce After Payment Requisite Cost. Page 11 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 3 Vendors May Please Note That Giving Normal Applicable To No No Not Allowed Intimation Regarding The Tender In Open All Bidders Tender Cases Or Giving Limited Tender Enquiry Does Not Guarantee The Suitability Of OffEr For Placement Of Purchase Order. Railway Reserve The Right To Place Purchase Order Subject To Fulï¬Lment Of Technical/Commercial Eligibility Conditions/Tender Conditions. 4 All Other Terms & Conditions As Per Irs Normal Applicable To No No Not Allowed Condition And Gcc All Bidders Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 A) Inspection By Tpi (Third Party Normal Applicable To No No Not Allowed Inspection Agency). Firm To Indicate All Bidders Complete Works Address Where Inspection Will Be Conducted. The Tenderer Shall Refer Annexure 13 Of Sr Tender Conditions For Further Details Regarding Tpi Clause. Please Note That OffErs With Inspection/Visual Inspection By Tpi Against Test Certiï¬Cate/Guarantee Certiï¬Cate /Work Test Certiï¬Cate Is Liable To Be Ignored. For Further Details Regarding Tpi Clause, The Tenderer Shall Refer Annexure 13 Of Sr Tender Conditions Attached To This Tender Document. Alternatively, Tenderers May Please Refer The Attachment Tpi Conditions Enclosed To This Tender Document For Ready Reference Of Bidders Regarding Tpi Clause. B) Bidder Shall Indicate Place Of Inspection For Pre-Dispatch Inspection Duly Enclosing The Documentary Evidence. Note:- Any Request For Change In Place Of Inspection Shall Only Be Entertained With Documentary Evidence. 2 No. Of Stages Of Inspection: 3; Description Normal Applicable To No No Not Allowed Of Stage-1 Inspection: Raw Material All Bidders Inspection As Per Tender Schedule (As 100% Of Po Qty.), Description Of Stage-2 Inspection: Manufacturing And Fabrication Inspection As Per Tender Schedule (As 100% Of Po Qty.), Description Of Stage-3 Inspection: Final Product Inspection At Firms Premises As Per Tender Schedule (As 100% Of Po Qty.), However, Final Inspection By Consignee At Consignees Premises As Per Clause 9 Of Bid Document Part Ii. 3 Marking : Manufacturer To Mark Their Normal Applicable To Yes Yes Not Allowed Name And Month Of Manufacture As Per All Bidders Drawing, Wherever Indicated, Or At A Location Where It May Not Get Obliterated In Service On The Item Being Supplied By Them Against The Purchase Order. Supplies Received Without This Are Liable To Be Rejected By Consignee. 4 I/We Agree To Supply The Tendered Stores Normal Applicable To Yes Yes Not Allowed At The Rates Quoted By Me/Us In All Bidders Accordance With The Irs Conditions Of Contract, Sr Tender Conditions, Special And Other Conditions Speciï¬Ed In This Tender Document/ Attached With This Tender Document. Page 12 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 5 Machine Should Have Warranty Of 24 Normal Applicable To Yes Yes Not Allowed Months From Date Of Successful All Bidders Commissioning. 6 No Developmental Order Will Be Placed For Normal Applicable To Yes Yes Not Allowed The Tendered Item. All Bidders 7 Post Warranty Camc Will Be Concluded By Normal Applicable To Yes Yes Not Allowed End-User Consignee At Their End After All Bidders Warranty Period, If Required. 8 Sd Bank Guarantee Is To Be In Favour Of Normal Applicable To Yes Yes Not Allowed Sr.Dfm/Mas. Format For Bank Guarantee All Bidders Is Available In Uploaded Document Conditions For Electronic Tenders . Contract Will Be Executed By President Of India Acting Through Principal Chief Materials Manager. Signature, Name And Address Of Two Witnesses Is Mandatory. 9 In Case Of Any Contradiction Between The Normal Applicable To Yes Yes Not Allowed Conditions Specified In The Main All Bidders Tender Document/Nit/Electronic Sor & Appended Annexures, The Condition Of Main Tender Document/Nit/Electronic Sor Will Supersede The Condition Specified In The Annexure. Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Normal Applicable To No No Not Allowed Other Charges Column Against The All Bidders Particular Items. No Separate Line Has Been Provided For Insurance Charges. 2 Either Along With The Third Party Normal Applicable To No No Not Allowed Inspection Or Separately, The Complete All Bidders Crane Assembly And All Its Accessories Such As Chains, Lifting Tackles As Mentioned In Schedule I Of Section V Should Be Inspected By A Competent Person Certiï¬Ed By The Director Of Industrial Safety And Health Of The Manufacturer S State. The Certiï¬Cates For The Entire Crane Assembly And The Accessories As Mentioned Above As Issued By The Competent Person In The Appropriate Format Should Be Sent To The Consignee Along With The Crane. The Validity Of Such Certiï¬Cates Should Not Have Expired At The Time Of Supply. These Certiï¬Cates Should Be Accompanied By The Credentials Of The Competent Person Also. The Validity Of His Or Her Certiï¬Cation Should Be Current On The Date Of Issue Of Certiï¬Cates By Him Or Her. Only The ϬRst Time Inspection And Certiï¬Cates Are To Be Arranged By The Supplier. Subsequent Inspections And Issue Of Certiï¬Cates Will Be Arranged By The Consignee. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 13 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 1 Bidders Must Submit Their Technical Bids Normal Applicable To Yes Yes Allowed As Per Format Annexure A. Tenderers Are All Bidders (Mandatory) Required To Submit Complete Details Including Values, Write-Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical OffEr Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 2 In The Bid Documents, Normal Applicable To Yes No Not Allowed (I) Is 3177:1999(Or Latest)And Duty Class All Bidders Iv Is To Be Read As Is 3177:2020 Duty Class M8: And (Ii) Is 807:2006 Is Be Read As Is 807:2006(Amendment -1,Oct-2014& Amendment - 2 Of Nov.2020). In Case Any Of These Speciï¬Cations Is Revised Or Upgraded Then The Latest Version Shall Take Precedence. 3 All Mechanical Equipment ( Gear Normal Applicable To Yes Yes Not Allowed Shaft, Couplers, Wheels) Drawings, All Bidders Drive Manuals, Operating Instruction And Maintenance Manual, Cable Index To Be Provided At The Time Of Supply. 6. Documents Attached With Tender S.No. Document Name Document Description 1 5380219.Pdf Leadingparametersfor50_10Toneotcrane_1.Pdf 2 5380252.Pdf Eotcranespec_1_Part1.Pdf 3 5380253.Pdf Eot Crancspec1-Part2 4 5381175.Pdf Tpi Guidelines 5 5381173.Pdf Irs Conditions 6 5401870.Pdf Sr Tender Conditions 7 5380242.Pdf Eotcranespec_2_2.Pdf 7. Responsiveness S.No. Description I/We Have Carefully Gone Through The Irs Conditions Of Contract (Included And Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Sister Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director/Promoter/Owner/Holding Company Decision Control Etc.) Have Participated In This Tender Which Can Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The 1 OffErs Of All Such Sister Concerns Including Ours Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General, With Speciï¬C Reference To ConflIct Of Interest [Para 2502 (E)], Anti Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected, At Any Stage. 2 Validity Of Offer:-120 Days, No Deviation From The Offer Validity Period Stipulated In The Tender Is Permitted. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Page 14 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly Tender Document Tender No 16255008 Closing Date/Time 30/06/2025 14:30 Digitally Signed By Cmm/M ( Baba Tulajaram Lalge ) , Cost Of Dsl (Type And Length Of Dsl As Specified In Schedule-L) ] , Cost Of Spares As Per Schedule-Iv & Additional Spares And Items As Specified In Schedule-I. ] , Cost Of Maintenance Tools As Per Schedule-V ] , Cost Of Installation & Commissioning Of Crane And Dsl (Length Of Dsl As Specified In Schedule -L). ] At (Location) Sse/Els/Ajj, Sr Tamil Nadu 1.00 Numbers 8 6579Ser2 Essential Non Stock --- Yes Consignee Inr (Grp1) Services (Y) Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/Els/Ajj, Sr Tamil Nadu 1.00 Numbers 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 4 Months Of Issue Of Contract, However, Delivery Completion : Within 6 Months Thereafter Period Shall Not Exceed No. Of Days As Mentioned In Delivery Schedule Chart Of Para 7 Of Section Iv Of Respective Bid Document Part Ii. However, The Delivery Period Indicated Being Tentative, May Vary At The Time Of Placement Of Order. Payment Terms S.No Description Payment Terms 1 1) 60% Payment: Upon Receipt Of The M&P, Duly Pre-Inspected By A Third -Party Inspection (Tpi) Agency, Receipted At The Site By The Consignee In Good Condition And Submission Of A Joint Receipt Note. 2) 20% Intermediate Payment: After Successful Installation And Commissioning And Submission Of A Joint Commissioning Note. 3) Final 20% Payment: After Commissioning Of The M&P At The Consignees End For A Minimum Period Of 30 Days, Upon Submission Of A 10% Warranty Bank Guarantee And A Proving Test Certificate Statutory Variation Clause S.No Description Page 2 Of 15 Run Date/Time: 27/05/2025 11:07:29Stores/Southern Rly , Cost Of Preventive Maintenance During 1St & 2Nd Year Of Warranty Period ] At (Location) Sse/Els/Ajj, Sr Tamil Nadu 1.00 Numbers
Contract Date: Jun 29, 2026 Contract Value : 95.30 Lakh
Government Departments No of Bidders 1
14.
Petroleum and Natural Gas #11378042 Technical Bid
Tender For Design, Engineering, Manufacturing, Procurement Of Materials And Bought Out Components, Fabrication, Including Start-Up / Commissioning Spares (If Applicable / Recommended By Vendor), Assembly At Shop, Inspection By Tpia, Testing At Manufacturers Works, Packing, Supply Of High Pressure Cl Seal Ring Connectors (Special) To Be Installed At Numaligarh Refinery Limited(Nrl), As Per The Enclosed Tender Standard Specifications, Job Specification, Data Sheets Etc. And Other Codes And Standards Attached Or Referred As Per Material Requisition For Numaligarh Refinery Limited, Golaghat, Assam, India. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) Normal Metal Seated Ball Valve , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) Normal Metal Seated Ball Valve , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-04 (Spec G42G), , 1.5 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-04 (Spec G42G), , 3 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-04 (Spec G42G), , 6 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A351 Gr.Cf8M, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-01 (Spec G42M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-01 (Spec G42M), , 1.5 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-01 (Spec G42M), , 2 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-01 (Spec G42M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-02 (Spec G44M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-02 (Spec G44M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , 1.5 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , 3 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , 4 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-05 (Spec G46M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-05 (Spec G46M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-06 (Spec G47M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-06 (Spec G47M), , 3 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-06 (Spec G47M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-08 (Spec G43M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-08 (Spec G43M), , 1.5 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-08 (Spec G43M), , 4 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-08 (Spec G43M), , 1 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 1.5 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 2 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 6 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 1 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-05 (Spec G46M), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-04 (Spec G42G), , 1.5 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-04 (Spec G42G), , 3 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-04 (Spec G42G), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 1.5 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 2 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 6 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , .75 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-02 (Spec G44M), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-02 (Spec G44M), , .75 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , 1 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , 1.5 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , 3 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , 4 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , .75 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-08 (Spec G43M), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-08 (Spec G43M), , 1.5 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-08 (Spec G43M), , .75 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-06 (Spec G47M), , 1 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-06 (Spec G47M), , 3 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-06 (Spec G47M), , 4 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-06 (Spec G47M), , .75 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-05 (Spec G46M), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-05 (Spec G46M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-01 (Spec G42M), , 1.5 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-01 (Spec G42M), , 2 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-01 (Spec G42M), , 6 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-01 (Spec G42M), , .75 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-02 (Spec G44M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-02 (Spec G44M), , .75 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 1 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 1.5 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 3 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 4 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-04 (Spec G42G), , 1.5 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-04 (Spec G42G), , 2 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-04 (Spec G42G), , 3 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-04 (Spec G42G), , .75 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-05 (Spec G46M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-05 (Spec G46M), , 1.5 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-05 (Spec G46M), , .75 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-06 (Spec G47M), , 1 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-06 (Spec G47M), , 3 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-06 (Spec G47M), , .75 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-08 (Spec G43M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-08 (Spec G43M), , 1.5 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-08 (Spec G43M), , 4 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-08 (Spec G43M), , 1 In Paddle Spacer Hub High Pressure Type, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub High Pressure Ends, -, -, -, Refer To Ds-03 (Spec G45M), , 1 In Paddle Blind Hub High Pressure Type, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub High Pressure Ends, -, -, -, Refer To Ds-03 (Spec G45M), , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-060005 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2221001A , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2221001B , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-222106 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2222001A , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2222001B , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2222006 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2222007 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-225607 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-263101 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-263102 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-263108 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-275603 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-275604 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-275605 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-280003 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-280006 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-280008 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-280019 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2803A01 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2803B01 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-890002 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-890004 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-890005 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-890031 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-8935A01 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-8935B01 , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) Normal Metal Seated Ball Valve , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) Normal Metal Seated Ball Valve , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , High Pressure Clamp Connectors(Special) For Detailed Description, Refer Datasheet Tp-1P30A-Pi-Dts-0072. , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-04 (Spec G42G), , 1.5 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-04 (Spec G42G), , 3 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-04 (Spec G42G), , 6 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A351 Gr.Cf8M, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-01 (Spec G42M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-01 (Spec G42M), , 1.5 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-01 (Spec G42M), , 2 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-01 (Spec G42M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-02 (Spec G44M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-02 (Spec G44M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , 1.5 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , 3 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , 4 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-03 (Spec G45M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-05 (Spec G46M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-05 (Spec G46M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-06 (Spec G47M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-06 (Spec G47M), , 3 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-06 (Spec G47M), , .75 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-08 (Spec G43M), , 1 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-08 (Spec G43M), , 1.5 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-08 (Spec G43M), , 4 In Clamp Assembly For High Pressure Hub, Mnf Std, Astm A182 Gr.F304, 2500 Lbs, For Hub High Pressure Ends, As Per Mnf Std, Refer To Ds-08 (Spec G43M), , 1 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 1.5 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 2 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 6 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 1 In Blind Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-05 (Spec G46M), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-04 (Spec G42G), , 1.5 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-04 (Spec G42G), , 3 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F9, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-04 (Spec G42G), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 1.5 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 2 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , 6 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-01 (Spec G42M), , .75 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-02 (Spec G44M), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-02 (Spec G44M), , .75 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , 1 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , 1.5 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , 3 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , 4 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-03 (Spec G45M), , .75 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-08 (Spec G43M), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-08 (Spec G43M), , 1.5 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-08 (Spec G43M), , .75 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-06 (Spec G47M), , 1 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-06 (Spec G47M), , 3 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-06 (Spec G47M), , 4 In X S-Xxs Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-06 (Spec G47M), , .75 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-05 (Spec G46M), , 1 In X S-160 Hub High Pressure Type, -, Mnf Std, Astm A182 Gr.F347 + Sour Service, 2500 Lbs, Hub Hp Ends, -, Refer To Ds-05 (Spec G46M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-01 (Spec G42M), , 1.5 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-01 (Spec G42M), , 2 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-01 (Spec G42M), , 6 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-01 (Spec G42M), , .75 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-02 (Spec G44M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-02 (Spec G44M), , .75 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 1 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 1.5 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 3 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 4 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-03 (Spec G45M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-04 (Spec G42G), , 1.5 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-04 (Spec G42G), , 2 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-04 (Spec G42G), , 3 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-04 (Spec G42G), , .75 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-05 (Spec G46M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-05 (Spec G46M), , 1.5 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-05 (Spec G46M), , .75 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-06 (Spec G47M), , 1 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-06 (Spec G47M), , 3 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-06 (Spec G47M), , .75 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-08 (Spec G43M), , 1 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-08 (Spec G43M), , 1.5 In X S-160 Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-08 (Spec G43M), , 4 In X S-Xxs Seal Ring, -, Mnf Std, Uns S66286, For Hub High Pressure, 2500 Lbs, -, Refer To Ds-08 (Spec G43M), , 1 In Paddle Spacer Hub High Pressure Type, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub High Pressure Ends, -, -, -, Refer To Ds-03 (Spec G45M), , 1 In Paddle Blind Hub High Pressure Type, Mnf Std, Astm A182 Gr.F321 + Sour Service, 2500 Lbs, Hub High Pressure Ends, -, -, -, Refer To Ds-03 (Spec G45M), , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-060005 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2221001A , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2221001B , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-222106 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2222001A , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2222001B , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2222006 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2222007 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-225607 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-263101 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-263102 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-263108 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-275603 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-275604 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-275605 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-280003 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-280006 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-280008 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-280019 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2803A01 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-2803B01 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-890002 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-890004 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-890005 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-890031 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-8935A01 , Thermowell Along With Clamp Connector Assemblyl . Refer Datasheet For Detailed Description Tp-1P30A-Pi-Dat-0071 1P30-Tw-8935B01
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 1
15.
Petroleum and Natural Gas #11347516 Technical Bid
Supply Of For Continuous Purging System For Severe-Service Metal-Seated Valves And Critical Measuring Instruments Design, Engineering, Manufacturing, Procurement Of Materials And Bought Out Components, For Purging System As Per Material Requisition For Numaligarh Refinery Limited, Golaghat, Assam, India , Supply Of Hp/Mp/Lp Continuous Purge System With All Required Hardware Including Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Items/Components, Assembly At Shop, Internal Testing, Inspection, Factory Testing And Acceptance (Fat), Packing Etc. Including Supply Of Mandatory And Commissioning Spares, Transportation As Per Mr , Mandatory Spares For Sr No 1.1 : Lumpsum Cost Of Mandatory Spares , Scope As Per Material Requisition. , Transportation: For Indegenious Bidders : Inland Transportation Charges By Road Of All Supplies From Vendor’S Works / Shop To Project Site, Numaligarh Refinery, Golaghat, Asaam/ Rail Transportation Up To Nmgs/Numaligarh Refinery Project Siding. , Unit Rate For Site Supervision (For Installation And Commissioning / Sat) And Training To Client Personnel At Site By The Expert Of Oem/ Oem’S Representative Shall Be Considered For The Entire Scope Subject To Successful Commissioning For Complete Package, Which Shall Also Be Considered For Commercial Evaluation-Per Diem Charges Upto 8 Hrs On Normal Working Days. ( Bidders To Quoteunit Rate For Diem Charges ) , Per Diem Unit Rate Forsupervision Sevices Of Erection And Commissioning / Performance Testing As Per Details Mentioned In Material Requisition For Quoted Items As Per Enclosed Instructions To Vendor Overtime Rate Per Hour (Beyond Normal 8 Hours On Normal Working Days). ( Bidders To Quote Over Timerate Per Hour ) , Per Diem Unit Rate Forsupervision Sevices Of Erection And Commissioning / Performance Testing As Per Details Mentioned In Material Requisition For Quoted Items As Per Enclosed Instructions To Vendor Overtime Rate Per Hour For Work On Weekly Off Days / Holidays (As Applicable To Refinery Site). ( Bidders To Quote Over Timerate Per Hour )
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 4
17.
Agriculture #11336082 Technical Bid
Tender for Supply, Installation, Erection, Testing, And Commissioning Of Pumpsets And Allied Works At Punchavayal, Manikkuni, Kolembetta, Valiyavattam, And Padiyeripumphousesunder The Scheme Ridf Xxviii Lift Irrigation Projects In Various Padashekharams Of Wayanad District. , Supply, Installation, Erection, Testing, And Commissioning Of Pumpsets And Allied Works , 1.01 Supply, Installation, Erection, Testing, Commissioning And Fitting Charges For All Accessories Of Horizontally Mounted Submerged Centrifugal Non Clog Pump Set Of Compact Unitary Mono-Block Submerged Single/Multi Stage, Volute Type Casing With Suitable Radial Type Impellers On Common Shaft For Pump And Motor ,Anti Friction Bearing With Life Time Greasing, Protection Features With Sensors To Monitor Temperature, Mechanical Seal Leakage ,Etc.(The Pump Should Be Confirming To His/Is Standards).The Moc Of Pump, Casing-Cast Iron, Impeller -Ss Cf8m,Shaft-Ss-316,Suction Strainer -Ss And Other As Per Is Standard. The Motor Should Be Suitable For 3 Phase,415V /-10%,50Hz /- 5%,Ac Supply Submersible Motor Having Class F /H Insulation, Air Filled And Ip-68Protection Confirming To Is 325 Or Latest Standards Suitable For Day Night Operation. The Pump Discharge Capacity Of 200 Cubic Metre /Hour Against Duty Point Head Of 48 Mtrs, Working Head Range 22 - 56M, Speed 1450Rpm(N) Or Nearer ,With 10Meters Of Copper Power Cable And Control Cable, Railing Arrangement. The Pump Should Be Painted With Three Coats Of Suitable Anti Corrosive Paint Over Priming Coat. The Electrical Works For The Pumpset Should Be Completed As Per Kseb Rules And Regulations And The Contractor Is Responsible For Arranging Permissions And Certificates From The Electrical Inspectorate. The Suction Side Of The Pumpset Should Be Provided With An Additional Steel Grill For Preventing Foreign Particles Inside The Inlet Side Of The Pump Casing. - 1 Nos, 1.02 Supply And Erection Of 60Hp Auto Transformer Starter (Ats) With Suitable Incomer And Contactors Including 24 Kvar Capacitor With Required Indications ,Metering And Protections For Single Phasing ,Overload, Pump Monitoring Unit To Protect From Ingress, High Temperature Level Etc Enclosed In A Closed Panel Board - 1 Nos, 1.03 Supply And Laying Additional Termination Cable Of 1.1Kv 3.5 Core 95Sqmm Aluminium Conductor Xlpe Insulated ;Steel Armoured Ug Cable As Per Relevant Is 7098 With Support For Cable - 40 Metre, 1.04 Providing Earthing As Per The Isi Specification With Earth Electrode Of 2.10M Class Be Gi Pipe Of Dia Not Less Than 40Mm With Necessary Funnelling Arrangement With Necessary Masonry Work And 38Mm Reinforced Cement Concrete Cover Slab For Brick Masonry - 4 Each, 1.05 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. - 2462.37 Kg, Supported With Suitable Concrete Foundation. 1.06 Providing And Fixing C.I. Non Return Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 250 Mm Diameter Class Ii - 1 Nos, 1.07 Providing And Fixing C.I. Non Return Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 200 Mm Diameter Class Ii - 1 Nos, 1.08 Ms Pipes 200Mm - Manufacturing Supplying And Fitting 200Mm Dia Ms Pipe Of Various Length With Shell Thickness 8Mm Including Painting With 2 Coats Of Red Oxide Primer, Laying The Same To Line And Level As Directed By Departmental Officers At Site. - 30 Metre, 1.09 Ms Flanges For 200Mm Pipe - Manufacturing Supplying And Fitting 200 Mm Dia Ms Flange Having Shell Thickness 10Mm Depth 60Mm With Suitable Bolt Holes Fixing The Flange In Position With Required Welding Around The Flange Pipe Joint Grinding For Smoothing The Welded Portion, Including Painting With Red Oxide Primer Etc. Complete As Directed By Departments Officers. - 16 Joint, 1.10 Providing And Fixing C.I. Sluice Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 200 Mm Diameter Class Ii - 1 Nos, 1.11 Supplying And Fixing Pressure Gauge 0-16 Kg/Cm2 With Psi 160Mm Dia, Bottom Mounting, 1/2 Bsp, Case: Ss With Case Vent, Window: Safety Glass, Dial: White Aluminium, Pointer: Black Aluminium, Dry Case, Accuracy: 1 % Of Fs.Units/Pkg: 1 To The Delivery Line Of Pumpsets - 1 Nos, 1.12 Providing And Fixing Ms Bolts Including Nuts And Washers With Two Coats Of Priming Coat Complete . - 69 Kg, 1.13 Supplying 2 Ton Chain Pully Unit For Lifting Submersible Motor Pumpset - 1 Nos, 1.14 Supplying 20Mm Steel Rope For Lifting Pumpset - 30 Metre, 1.15 Painting With Black Anti- Corrosive Bitumastic Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work - 102.259 Sqm, 1.16 Suitable Mobi Start Arrangement For Pumpset- 1 Nos, 1.17 Kseb Service Connection Charges To Punchavayal Pump House - 1 Nos , 2.01 Supply, Installation, Erection, Testing, Commissioning And Fitting Charges For All Accessories Of Horizontzlly Mounted Submerged Centrifugal Non Clog Pump Set Of Compact Unitary Mono-Block Submerged Single/Multi Stage, Volute Type Casing With Suitable Radial Type Impellers On Common Shaft For Pump And Motor ,Anti Friction Bearing With Life Time Greasing, Protection Features With Sensors To Monitor Temperature, Mechanical Seal Leakage ,Etc.(The Pump Should Be Confirming To His/Is Standards).The Moc Of Pump, Casing-Cast Iron, Impeller -Ss Cf8m,Shaft-Ss-316,Suction Strainer -Ss And Other As Per Is Standard. The Motor Should Be Suitable For 3 Phase,415V /-10%,50Hz /- 5%,Ac Supply Submersible Motor Having Class F /H Insulation, Air Filled And Ip-68Protection Confirming To Is 325 Or Latest Standards Suitable For Day Night Operation. The Pump Discharge Capacity Of 160 Cubic Metre /Hour Against Duty Point Head Of 40 Mtrs, Working Head Range 22 - 47M, Speed 1450 Rpm(N) Or Nearer ,With 10Meters Of Copper Power Cable And Control Cable, Railing Arrangement. The Pump Should Be Painted With Three Coats Of Suitable Anti Corrosive Paint Over Priming Coat. The Electrical Works For The Pumpset Should Be Completed As Per Kseb Rules And Regulations And The Contractor Is Responsible For Arranging Permissions And Certificates From The Electrical Inspectorate. The Suction Side Of The Pumpset Should Be Provided With An Additional Steel Grill For Preventing Foreign Particles Inside The Inlet Side Of The Pump Casing. - 1 Nos, 2.02 Supply And Erection Of 40Hp Auto Transformer Starter (Ats) With Suitable Incomer And Contactors Including 16 Kvar Capacitor With Required Indications ,Metering And Protections For Single Phasing ,Over Load, Pump Monitoring Unit To Protect From Ingress, High Temperature Level Etc Enclosed In A Closed Panel Board - 1 Nos, 2.03 Supply And Laying Additional Termination Cable Of 1.1Kv 3.5 Core 70Sqmm Aluminium Conductor Xlpe Insulated ;Steel Armoured Ug Cable As Per Relevant Is 7098 With Support For Cable - 60 Metre, 2.04 Providing Earthing As Per The Isi Specification With Earth Electrode Of 2.10M Class Be Gi Pipe Of Dia Not Less Than 40Mm With Necessary Funnelling Arrangement With Necessary Masonry Work And 38Mm Reinforced Cement Concrete Cover Slab For Brick Masonry - 4 Each, 2.05 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. - 984.95 Kg, Supported With Suitable Concrete Foundation. 2.06 Providing And Fixing C.I. Non Return Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 250 Mm Diameter Class Ii - 1 Nos, 2.07 Providing And Fixing C.I. Non Return Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 200 Mm Diameter Class Ii - 1 Nos, 2.08 Ms Pipes 150Mm - Manufacturing Supplying And Fitting 150Mm Dia Ms Pipe Of Various Length With Shell Thickness 6Mm Including Painting With 2 Coats Of Red Oxide Primer, Laying The Same To Line And Level As Directed By Departmental Officers At Site. - 20 Metre, 2.09 Ms Flanges For 150Mm Pipe - Manufacturing Supplying And Fitting 150Mm Dia Ms Flange Having Shell Thickness 10Mm Depth 75Mm With Suitable Bolt, Holes, Fixing The Flange In Position With Required Welding Around The Flange, Pipe Joint Grinding For Smoothing The Welded Portion Including Painting With Red Oxide Primer Etc. Complete As Directed By Departments Officers. - 16 Joint, 2.10 Providing And Fixing C.I. Sluice Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 150 Mm Diameter Class Ii - 1 Nos, 2.11 Supplying And Fixing Pressure Gauge 0-16 Kg/Cm2 With Psi 160Mm Dia, Bottom Mounting, 1/2 Bsp, Case: Ss With Case Vent, Window: Safety Glass, Dial: White Aluminium, Pointer: Black Aluminium, Dry Case, Accuracy: 1 % Of Fs.Units/Pkg: 1 To The Delivery Line Of Pumpsets - 1 Nos, 2.12 Providing And Fixing Ms Bolts Including Nuts And Washers With Two Coats Of Priming Coat Complete . - 46 Kg, 2.13 Supplying 2 Ton Chain Pully Unit For Lifting Submersible Motor Pumpset - 1 Nos, 2.14 Supplying 20Mm Steel Rope For Lifting Pumpset - 20 Metre, 2.15 Painting With Black Anti- Corrosive Bitumastic Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work - 40.903 Sqm, 2.16 Suitable Mobi Start Arrangement For Pumpset- 1 Nos, 2.17 Kseb Service Connection Charges To Manikkuni Pump House - 1 Nos , 3.01 Supply, Installation, Erection, Testing, Commissioning And Fitting Charges For All Accessories Of Horizontally Mounted Submerged Centrifugal Non Clog Pump Set Of Compact Unitary Mono-Block Submerged Single/Multi Stage, Volute Type Casing With Suitable Radial Type Impellers On Common Shaft For Pump And Motor ,Anti Friction Bearing With Life Time Greasing, Protection Features With Sensors To Monitor Temperature, Mechanical Seal Leakage ,Etc.(The Pump Should Be Confirming To His/Is Standards).The Moc Of Pump, Casing-Cast Iron, Impeller -Ss Cf8m,Shaft-Ss-316,Suction Strainer -Ss And Other As Per Is Standard. The Motor Should Be Suitable For 3 Phase,415V /-10%,50Hz /- 5%,Ac Supply Submersible Motor Having Class9;F39;/H Insulation, Air Filled And Ip-68Protection Confirming To Is 325 Or Latest Standards Suitable For Day Night Operation. The Pump Discharge Capacity Of 185 Cubic Metre /Hour Against Duty Point Head Of 24 Mtrs, Working Head Range 18 - 34M, Speed 1450Rpm(N) Or Nearer ,With 10Meters Of Copper Power Cable And Control Cable, Railing Arrangement. The Pump Should Be Painted With Three Coats Of Suitable Anti Corrosive Paint Over Priming Coat. The Electrical Works For The Pumpset Should Be Completed As Per Kseb Rules And Regulations And The Contractor Is Responsible For Arranging Permissions And Certificates From The Electrical Inspectorate. The Suction Side Of The Pumpset Should Be Provided With An Additional Steel Grill For Preventing Foreign Particles Inside The Inlet Side Of The Pump Casing. - 1 Nos, 3.02 Supply And Erection Of 30Hp Auto Transformer Starter (Ats) With Suitable Incomer And Contactors Including 12.5 Kva Capacitor With Required Indications ,Metering And Protections For Single Phasing ,Over Load, Pump Monitoring Unit To Protect From Ingress, High Temperature Level Etc Enclosed In A Closed Panel Board - 1 Nos, 3.03 Supply And Laying Additional Termination Cable Of 1.1Kv 3.5 Core 50Sqmm Aluminium Conductor Xlpe Insulated ;Steel Armoured Ug Cable As Per Relevant Is 7098 With Support For Cable - 40 Metre, 3.04 Providing Earthing As Per The Isi Specification With Earth Electrode Of 2.10M Class Be Gi Pipe Of Dia Not Less Than 40Mm With Necessary Funnelling Arrangement With Necessary Masonry Work And 38Mm Reinforced Cement Concrete Cover Slab For Brick Masonry - 4 Each, 3.05 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. - 2462.37 Kg, Supported With Suitable Concrete Foundation. 3.06 Providing And Fixing C.I. Non Return Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 150 Mm Diameter Class Ii - 1 Nos, 3.07 Ms Pipes 150Mm - Manufacturing Supplying And Fitting 150Mm Dia Ms Pipe Of Various Length With Shell Thickness 6Mm Including Painting With 2 Coats Of Red Oxide Primer, Laying The Same To Line And Level As Directed By Departmental Officers At Site. - 35 Metre, 1.26 Ms Flanges For 150Mm Pipe - Manufacturing Supplying And Fitting 150Mm Dia Ms Flange Having Shell Thickness 10Mm Depth 75Mm With Suitable Bolt, Holes, Fixing The Flange In Position With Required Welding Around The Flange, Pipe Joint Grinding For Smoothing The Welded Portion Including Painting With Red Oxide Primer Etc. Complete As Directed By Departments Officers. - 18 Joint, 1.29 Providing And Fixing C.I. Sluice Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 150 Mm Diameter Class Ii - 1 Nos, 3.08 Supplying And Fixing Pressure Gauge 0-16 Kg/Cm2 With Psi 160Mm Dia, Bottom Mounting, 1/2 Bsp, Case: Ss With Case Vent, Window: Safety Glass, Dial: White Aluminium, Pointer: Black Aluminium, Dry Case, Accuracy: 1 % Of Fs.Units/Pkg: 1 To The Delivery Line Of Pumpsets - 1 Nos, 3.09 Providing And Fixing Ms Bolts Including Nuts And Washers With Two Coats Of Priming Coat Complete . - 34 Kg, 3.10 Supplying 2 Ton Chain Pully Unit For Lifting Submersible Motor Pumpset - 1 Nos, 3.11 Supplying 20Mm Steel Rope For Lifting Pumpset - 30 Metre, 3.12 Painting With Black Anti- Corrosive Bitumastic Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work - 102.258 Sqm, 3.13 Suitable Mobi Start Arrangement For Pumpset- 1 Nos, 3.14 Kseb Service Connection Charges To Kolembetta Pump House - 1 Nos , 4.01 Supply, Installation, Erection, Testing, Commissioning And Fitting Charges For All Accessories Of Horizontally Mounted Submerged Centrifugal Non Clog Pump Set Of Compact Unitary Mono-Block Submerged Single/Multi Stage, Volute Type Casing With Suitable Radial Type Impellers On Common Shaft For Pump And Motor ,Anti Friction Bearing With Life Time Greasing, Protection Features With Sensors To Monitor Temperature, Mechanical Seal Leakage ,Etc.(The Pump Should Be Confirming To His/Is Standards).The Moc Of Pump, Casing-Cast Iron, Impeller -Ss Cf8m,Shaft-Ss-316,Suction Strainer -Ss And Other As Per Is Standard. The Motor Should Be Suitable For 3 Phase,415V /-10%,50Hz /- 5%,Ac Supply Submersible Motor Having Class F /H Insulation, Air Filled And Ip-68Protection Confirming To Is 325 Or Latest Standards Suitable For Day Night Operation. The Pump Discharge Capacity Of 155 Cubic Metre /Hour Against Duty Point Head Of 22 Mtrs, Working Head Range 13 - 27M, Speed 1450 Rpm(N) Or Nearer, With 10Meters Of Copper Power Cable And Control Cable, Railing Arrangement. The Pump Should Be Painted With Three Coats Of Suitable Anti Corrosive Paint Over Priming Coat. The Electrical Works For The Pumpset Should Be Completed As Per Kseb Rules And Regulations And The Contractor Is Responsible For Arranging Permissions And Certificates From The Electrical Inspectorate. The Suction Side Of The Pumpset Should Be Provided With An Additional Steel Grill For Preventing Foreign Particles Inside The Inlet Side Of The Pump Casing. - 1 Nos, 4.02 Supply And Erection Of 25Hp Auto Transformer Starter (Ats) With Suitable Incomer And Contactors Including 10 Kvar Capacitor With Required Indications ,Metering And Protections For Single Phasing ,Over Load, Pump Monitoring Unit To Protect From Ingress, High Temperature Level Etc Enclosed In A Closed Panel Board - 1 Nos, 4.03 Supply And Laying Additional Termination Cable Of 1.1Kv 3.5 Core 35Sqmm Aluminium Conductor Xlpe Insulated ;Steel Armoured Ug Cable As Per Relevant Is 7098 With Support For Cable - 20 Metre, 4.04 Providing Earthing As Per The Isi Specification With Earth Electrode Of 2.10M Class Be Gi Pipe Of Dia Not Less Than 40Mm With Necessary Funnelling Arrangement With Necessary Masonry Work And 38Mm Reinforced Cement Concrete Cover Slab For Brick Masonry - 4 Each, 4.05 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. - 344.73 Kg, Supported With Suitable Concrete Foundation. 4.06 Providing And Fixing C.I. Non Return Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 150 Mm Diameter Class Ii - 1 Nos, 4.07 Providing And Fixing C.I. Non Return Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 125 Mm Diameter Class Ii - 1 Nos, 4.08 Ms Pipes 125Mm - Manufacturing Supplying And Fitting 125Mm Dia Ms Pipe Of Various Length With Shell Thickness 6Mm Including Painting With 2 Coats Of Red Oxide Primer, Laying The Same To Line And Level As Directed By Departmental Officers At Site - 15 Metre, 4.09 Ms Flanges For 125Mm Pipe - Manufacturing Supplying And Fitting 125 Mm Dia Ms Flange Having Shell Thickness 10Mm Depth 60Mm With Suitable Bolt Holes Fixing The Flange In Position With Required Welding Around The Flange Pipe Joint Grinding For Smoothing The Welded Portion, Including Painting With Red Oxide Primer Etc. Complete As Directed By Departments Officers. - 16 Joint, 4.10 Providing And Fixing C.I. Sluice Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 125 Mm Diameter Class Ii - 1 Nos, 4.11 Supplying And Fixing Pressure Gauge 0-16 Kg/Cm2 With Psi 160Mm Dia, Bottom Mounting, 1/2 Bsp, Case: Ss With Case Vent, Window: Safety Glass, Dial: White Aluminium, Pointer: Black Aluminium, Dry Case, Accuracy: 1 % Of Fs.Units/Pkg: 1 To The Delivery Line Of Pumpsets - 1 Nos, 4.12 Providing And Fixing Ms Bolts Including Nuts And Washers With Two Coats Of Priming Coat Complete . - 29 Kg, 4.13 Supplying 2 Ton Chain Pully Unit For Lifting Submersible Motor Pumpset - 1 Nos, 4.14 Supplying 20Mm Steel Rope For Lifting Pumpset - 10 Metre, 4.15 Painting With Black Anti- Corrosive Bitumastic Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work - 14.316 Sqm, 4.16 Suitable Mobi Start Arrangement For Pumpset- 1 Nos, 4.17 Kseb Service Connection Charges To Valiyavattam Pump House - 1 Nos , 5.01 Supply, Installation, Erection, Testing, Commissioning And Fitting Charges For All Accessories Of Horizontally Mounted Submerged Centrifugal Non Clog Pump Set Of Compact Unitary Mono-Block Submerged Single/Multi Stage, Volute Type Casing With Suitable Radial Type Impellers On Common Shaft For Pump And Motor ,Anti Friction Bearing With Life Time Greasing, Protection Features With Sensors To Monitor Temperature, Mechanical Seal Leakage ,Etc.(The Pump Should Be Confirming To His/Is Standards).The Moc Of Pump, Casing-Cast Iron, Impeller -Ss Cf8m,Shaft-Ss-316,Suction Strainer -Ss And Other As Per Is Standard. The Motor Should Be Suitable For 3 Phase,415V /-10%,50Hz /- 5%,Ac Supply Submersible Motor Having Class F /H Insulation, Air Filled And Ip-68Protection Confirming To Is 325 Or Latest Standards Suitable For Day Night Operation. The Pump Discharge Capacity Of 125 Cubic Metre /Hour Against Duty Point Head Of 26 Mtrs, Working Head Range 16 - 32M, Speed 1450 Rpm(N) Or Nearer ,With 10Meters Of Copper Power Cable And Control Cable, Railing Arrangement. The Pump Should Be Painted With Three Coats Of Suitable Anti Corrosive Paint Over Priming Coat. The Electrical Works For The Pumpset Should Be Completed As Per Kseb Rules And Regulations And The Contractor Is Responsible For Arranging Permissions And Certificates From The Electrical Inspectorate. The Suction Side Of The Pumpset Should Be Provided With An Additional Steel Grill For Preventing Foreign Particles Inside The Inlet Side Of The Pump Casing. - 1 Nos, 5.02 Supply And Erection Of 20Hp Auto Transformer Starter (Ats) With Suitable Incomer And Contactors Including 8 Kvar Capacitor With Required Indications ,Metering And Protections For Single Phasing ,Over Load, Pump Monitoring Unit To Protect From Ingress, High Temperature Level Etc Enclosed In A Closed Panel Board - 1 Nos, 5.03 Supply And Laying Additional Termination Cable Of 1.1Kv 3.5 Core 35 Sqmm Aluminium Conductor Xlpe Insulated ;Steel Armoured Ug Cable As Per Relevant Is 7098 With Support For Cable - 50 Metre, 5.04 Providing Earthing As Per The Isi Specification With Earth Electrode Of 2.10M Class Be Gi Pipe Of Dia Not Less Than 40Mm With Necessary Funnelling Arrangement With Necessary Masonry Work And 38Mm Reinforced Cement Concrete Cover Slab For Brick Masonry - 4 Each, 5.05 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. - 344.73 Kg, Supported With Suitable Concrete Foundation. 5.06 Providing And Fixing C.I. Non Return Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 200 Mm Diameter Class Ii - 1 Nos, 5.07 Providing And Fixing C.I. Non Return Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 125 Mm Diameter Class Ii - 1 Nos, 5.08 Ms Pipes 125Mm - Manufacturing Supplying And Fitting 125Mm Dia Ms Pipe Of Various Length With Shell Thickness 6Mm Including Painting With 2 Coats Of Red Oxide Primer, Laying The Same To Line And Level As Directed By Departmental Officers At Site - 15 Metre, 5.09 Ms Flanges For 125Mm Pipe - Manufacturing Supplying And Fitting 125 Mm Dia Ms Flange Having Shell Thickness 10Mm Depth 60Mm With Suitable Bolt Holes Fixing The Flange In Position With Required Welding Around The Flange Pipe Joint Grinding For Smoothing The Welded Portion, Including Painting With Red Oxide Primer Etc. Complete As Directed By Departments Officers. - 18 Joint, 5.10 Providing And Fixing C.I. Sluice Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertion Etc. (The Tail Pieces If Required Will Be Paid Separately): 125 Mm Diameter Class Ii - 1 Nos, 5.11 Supplying And Fixing Pressure Gauge 0-16 Kg/Cm2 With Psi 160Mm Dia, Bottom Mounting, 1/2 Bsp, Case: Ss With Case Vent, Window: Safety Glass, Dial: White Aluminium, Pointer: Black Aluminium, Dry Case, Accuracy: 1 % Of Fs.Units/Pkg: 1 To The Delivery Line Of Pumpsets - 1 Nos, 5.12 Providing And Fixing Ms Bolts Including Nuts And Washers With Two Coats Of Priming Coat Complete . - 23 Kg, 5.13 Supplying 2 Ton Chain Pully Unit For Lifting Submersible Motor Pumpset - 1 Nos, 5.14 Supplying 20Mm Steel Rope For Lifting Pumpset - 10 Metre, 5.15 Painting With Black Anti- Corrosive Bitumastic Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work - 14.316 Sqm, 5.16 Suitable Mobi Start Arrangement For Pumpset- 1 Nos, 5.17 Kseb Service Connection Charges To Padiyeri Pump House - 1 Nos
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Contract Date: Ref. Documents Contract Value : 62.15 Lakh
Government Departments No of Bidders 8
19.
Tourism #11320518 Technical Bid
Tender For Tourism Development Work Of Shri Ramjanaki Temple, Kotawari In Shahjahanpur District.-1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. All Kinds Of Soil Dsr-2.6.1 170.25 Cum 133.12 127.80 21757.52 In All Kind Of Soil Upto 1.5M To 3.0M. Depth 2.6.1+2.26.1 18.74 Cum 228.22 219.09 4106.24 In All Kind Of Soil Upto 3.0M To 4.5M. Depth 2.6.1+(2.26.1* 2) 6.37 Cum 323.31 310.38 1977.88 2 Excavation Of Foundation In Ordinary Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 Meter And Including Filling, Watering And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Sur-Plus Earth As Directed By The Engineer Incharge Up To A Distance Of 30 Meters From The Foundation Trenches. Dsr-2.1.1 35.61 Cum 97.38 93.49 3329.14 3 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lift. Dsr-2.25 8.70 Cum 147.00 141.12 1227.84 4 Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete Dsr-2.25(A) 55.60 Cum 525.36 504.34 28041.40 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) Dsr-4.1.8 70.78 Cum 5108.83 4904.47 347162.56 6 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. Dsr-2.27 26.31 Cum 1592.76 1529.05 40229.27 7 Diluting And Injecting Chemical Emulsion For Postonstructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration Dsr-2.35.3.1 194.47 Sqm 232.53 223.23 43411.24 8 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). Dsr-5.3 82.66 Cum 8628.83 8283.68 684729.10 9 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) Footing Dsr-5.1.2 21.98 Cum 6784.08 6512.72 143149.60 10 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Dsr-5.2.2 22.97 Cum 8139.44 7813.86 179484.39 Abstract Of Cost Delhi Schedule Of Rate Effective From 12/07/2023 X (0.735X106/107X1.03) Has Been Followed. Proposed Tourism Development Of Ramjanki Temple At Kotawari, Tilhar, Sahjahanpur, U.P. 11 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers Dsr-5.9.5 257.49 Sqm 552.28 530.19 136518.66 12 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform Dsr-5.9.3 407.10 Sqm 695.41 667.60 271778.96 13 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete Dsr-5.9.1 63.96 Sqm 294.10 282.34 18058.37 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts Dsr-5.9.6 208.86 Sqm 720.95 692.11 144554.66 15 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Dsr-6.1.1 16.84 Cum 5527.80 5306.69 89341.45 16 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.1.2 51.30 Cum 5349.01 5135.05 263427.92 17 Providing And Laying Damp-Proof Course 50Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20Mm Nominal Size Derived From Natural Sources). Dsr-4.11 2.14 Sqm 371.80 356.93 763.83 18 Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Of Vg-10 Of Approved Quality Using 1.7Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With A Piece Of Cloth Lightly Soaked In Kerosene Oil. Dsr-4.13 44.55 Sqm 109.61 105.22 4687.75 19 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.4.2 80.04 Cum 6829.23 6556.06 524747.32 20 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Dsr-6.13.2 60.18 Sqm 842.82 809.11 48692.17 21 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More Dsr-5.22A.6 186.64 Qtl 8088.48 7764.94 1449250.34 22 15 Mm Cement Plaster On Plinth Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Coarse Sand) Dsr-13.5.1 65.74 Sqm 308.80 296.45 19488.62 23 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.5.2 252.10 Sqm 296.50 284.64 71758.35 24 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.4.2 609.85 Sqm 257.73 247.42 150888.63 25 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To R.C.C. Projections. Dsr-5.30 315.01 Rm 58.80 56.45 17781.09 26 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Dsr-11.3.1 29.40 Sqm 460.63 442.21 13000.95 27 Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement.18 Mm Thick Dsr-11.6.1 3.35 Sqm 496.52 476.66 1596.81 26 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm Dsr-11.41.2 137.75 Sqm 1165.05 1118.45 154065.99 27 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To |.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm Dsr-11.46.2 10.17 Sqm 1217.25 1168.56 11884.22 28 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Dsr-11.37A 148.53 Sqm 812.00 779.52 115781.77 29 Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Dsr-11.39 4.40 Sqm 997.47 957.57 4213.30 30 Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Ordinary Cement Without Any Pigment 11.20.4 6.12 Sqm 792.24 760.55 4654.54 31 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 35 Mm Thick Dsr-9.5.1.1 6.30 Sqm 3083.86 2960.50 18651.18 32 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 30 Mm Thick Dsr-9.5.1.2 83.22 Sqm 2810.38 2697.97 224524.67 33 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws Dsr-9.21.1 15.33 Sqm 1794.43 1722.65 26408.23 34 Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30X10X15Cm 1:3:6 Mix (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). Dsr-9.53 128.00 Nos 171.63 164.77 21090.11 35 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding Dsr-9.48.1 937.05 Kg 164.32 157.75 147816.54 36 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10X10 Cm Of C.C. 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). Dsr-10.13.1 100.80 Kg 106.27 102.02 10283.67 37 Providing And Fixing Angle Iron Frames For Doors, Windows And Ventilators Of Mild Steel Angle Sections Of Size 35X35X5 Mm, Joints Mitred And Welded By Angle Iron 35X35X5 Mm Or 35X 5 Mm Flat Pieces To The Existing T-Iron Frame Or To The Wall With Dash Fastener, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer, All Complete As Per The Direction Of Engineer-In-Charge. Dsr-10.31 125.00 Kg 97.87 93.96 11744.60 38 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-Incharge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Dsr 10.28 133.33 Kg 579.28 556.11 74146.05 39 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).(Sal Wood) Dsr-9.1.2 1.61 Cum 87387.28 83891.79 135065.79 40 Fixing Of Door, Windows/Ventilators Chaukhats In Position. (A) Door Chaukhats Above 1.5 Sqm To 5.0Sqm Mr 19.00 Nos 150.00 144.00 2736.00 (B) Window Chaukhats Above 1.5 Sqm 12.00 Nos 100.00 96.00 1152.00 (C) Ventilator Chaukhats 7.00 Nos 50.00 48.00 336.00 41 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: New Work (Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) Dsr-13.47.1 407.00 Sqm 128.32 123.19 50137.46 42 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Dsr-13.41.1 434.15 Sqm 139.23 133.66 58030.01 43 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Dsr-13.80 841.15 Sqm 117.03 112.35 94505.07 44 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete :250X16 Mm Dsr-9.62.2 11.00 Nos 145.27 139.46 1534.05 45 Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete : 250X10 Mm Dsr-9.63.1 21.00 Nos 62.92 60.41 1268.53 200X10 Mm Dsr-9.63.2 65.00 Nos 52.05 49.97 3247.81 46 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete :100 Mm Dsr-9.66.2 54.00 Nos 24.41 23.44 1265.50 47 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete Dsr-9.82 1.00 Nos 91.23 87.59 87.59 48 Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc Consisting Of Following Operations: (A) Applying A Slurry Coat Of Neat Cement Using 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is. 2645 And Approved By Engineer-In-Charge Over The Rcc Slab Including Adjoining Walls Upto 300 Mm Height Including Cleaning The Surface Before Treatment. (B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 25 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge. (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix 1:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep. (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.“All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge : With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65 Mm Dsr-22.7.1 198.55 Sqm 1263.41 1212.87 240815.58 49 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture Dsr-13.48.3 144.65 Sqm 128.02 122.90 17777.47 50 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture Dsr-13.48.2 209.70 Sqm 132.18 126.90 26610.03 51 Providing & Fixing Panes Of Glass With Equal Or Equivalent I.S.I Marked Quality Putty. Brads And Springs And Including Supply Of All Materials And Labour Etc Complete . 3.8 To 4.7 Mm Thick Dsr-10.30.1 44.76 Sqm 805.96 773.72 34631.80 52 Supply And Fixing Of Drop Down Rail / Grab Bars Mr 4.00 Nos. 4400.00 4224.00 16896.00 53 Providing, Driving With Hydraulic Piling Rigs With Power Units And Installing Driven Cast-In-Situ Reinforced Cement Concrete Piles Of Grade M-25 Of Specified Diameter And Length Below The Pile Cap, To Carry Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Shoe And The Length Of Pile To Be Embedded In The Pile Cap Etc. All Complete. (Length Of Pile For Payment Shall Be Measured From Top Of Shoe To The Bottom Of Pile Cap) : 400 Mm Dia Piles Dsr-20.1.1 48.00 Rm 2075.18 1992.17 95624.30 54 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : 30 Mm Thick Dsr-8.14.1.5 50.74 Sqm 3971.79 3812.92 193478.98 55 Stone Work In Plain Ashlar In Super Structure Upto Floor Five Level In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Including Pointing With Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade Both Face Dressed Red Sand Stone Dsr-7.12.1.1 3.56 Cum 51218.78 49170.03 175241.97 56 Extra For Stone Work Ashlar Sunk Or Moulded Or Sunk And Moulded Or Carved In : Triangular Or Square Or Rectangular Pillars Dsr-7.21.1 3.56 Cum 2834.15 2720.79 9696.89 57 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required. Dsr-8.15 99.58 Kg. 535.78 514.35 51219.04 58 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 50Mm Dsr 8.14.1.3 37.80 Sqm. 4342.28 4168.59 157572.62 59 Providing And Fixing Copper Pins 7.5 Cm Long 6 Mm Diameter For Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases. Dsr 8.16 30.00 Nos. 32.92 31.61 948.21 60 Providing And Fixing Stone Jali 40 Mm Thick Throughout In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc. Red Sand Stone Dsr 7.33.1 4.50 Sqm. 11198.29 10750.35 48376.59 61 Stone Work, Plain In Copings, Cornices, String Courses And Plinth Courses, Upto 75 Mm Thick In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand), Including Pointing With White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade.: Red Sand Stone Dsr 7.32.1 0.47 Cum. 70303.46 67491.32 31720.92 62 Carving & Engraving Work On Red Sand Stone (Labour Only) M.R. 9.73 Sqm. 15615.00 14990.40 145856.59 63 Manufacturing, Supplying And Fixing Retro Reflective Overhead Signage Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity And Encapsulated Lens Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iii Of Astm-D-4956-01 As Approved By Engineer-In-Charge, Letters, Borders Etc. As Per Irc : 67-2001 In Silver White With Blue Colour Back Ground And With High Intensity Grade, Pasted On Substrate By Pressure Sensitive Adhesive Backing Which Shall Be Activated By Applying Pressure Conforming To Class Ii Of Astm-D-4956-01 And Fixing The Same To The Plate Of Structural Frame Work By Means Of Suitable Sized Aluminium Alloys, Rivets Or Bolts & Nuts @ 300 Mm Centre To Centre All Along The Periphery As Well As In Two Vertical Rows Along With Theft Resistant Measures, Including The Cost Of Painting With Two Or More Coats Of Epoxy Paint In Grey Colour On The Back Side Of Aluminium Sheet Including Appropriate Priming Coat. The Rate Includes The Cost Of Rounding Off The Corners, Lowering Down The Structural Frame Work From The Gantry, Fixing And Erecting The Same In Position All Complete As Per Drawings, Specification And Direction Of The Engineerincharge.( Structural Frame Work Including M.S. Plate To Be Provided Separately. Rectangular Area Of The Sheet Only Shall Be Measured For Payment). Overhead Informatory Road Signage Dsr 16.60.1 8.64 Sqm. 4409.78 4233.39 36576.45 64 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Dsr 8.2.2.2 34.45 Sqm 3852.10 3698.01 127396.50 65 Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. Dsr-4.17 6.00 Sqm 561.96 539.48 3236.87 66 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50 Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineer-In-Charge.80 Mm Thick C.C. Paver Block Of M-35 Grade With Approved Colour Design And Pattern Dsr-16.91.2 207.07 Sqm 818.60 785.85 162723.31 1 Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fitting And Fixtures Completed Including Cutting And Making Good The Walls And Floors Wherever Required.White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 17.1.1 2.00 Nos. 5075.38 4872.36 9744.73 2 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Isi Marked White Solid Plastic Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required. W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 17.2.1 3.00 Nos. 4886.50 4691.04 14073.11 3 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require A) White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.7.4 4.00 Nos. 1409.35 1352.98 5411.91 4 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260X350 Mm And 340X410X265 Mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required A) One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern 17.4.1 3.00 Nos. 4918.90 4722.14 14166.42 5 Providing And Fixing Flexible P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc Waste Fittings Complete. Flexible Pipe 17.28.2 A) 32Mm Dia 17.28.2.1 4.00 Nos. 89.66 86.07 344.29 B) 40Mm Dia 17.28.2.2 2.00 Nos. 89.66 86.07 172.15 6 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 17.31 4.00 No. 1205.92 1157.69 4630.74 7 Providing And Fixing Cp Brass Single Lever Lelephonic Wall Mixture Of Quality & Make And As Per Thedirection Of Enginer-Incharge. A) 15Mm Dia Nominal Dia. 17.22B 2.00 Each 5205.39 4997.17 9994.34 8 Providing And Fixing 8 Mm Dia C.P./S.S. Jet With Flexible Tube Upto 1 Meter Long With S.S. Triangular Plate For Eureopean Type W.C. Of Quality And Make As Approved By Engineer-In-Charge. 15Mm Nominal Bore 17.16A 2.00 Each 261.85 251.38 502.76 Sanitary Fixtures & Accessories : I 9 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms. Dsr-17.73.2 1.00 Each 531.69 510.43 510.43 10 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements, Weighing Not Less Than 106 Gms. Dsr-18.65 1.00 Each 83.58 80.24 80.24 11 Providing And Fixing C.P. Brass Ablution Health Faucet Assembly With 1.0 M Long Braided Pvc Hose With Mounting Bracket Fixed On Wall Complete.[For Ewc]-Make-Jaquar Ald565 Mr 2.00 Each 1705.00 1636.80 3273.60 12 Providing And Fixing C.P. Brass Two-Way Angle Valve For Ewc Points & For Fixing Ablution Health Faucet Of Approved Quality Conforming To Is:8931. 15 Mm Nominal Bore-Essco Sqt 526A Mr 2.00 Each 1335.00 1281.60 2563.20 1 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion . (I) Single Socketed Pipes. A) 110Mm Diameter 12.41.2 31.30 Mtr 283.04 271.72 8504.80 2 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over Pvc Sheet 1M X 1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement,Punning,Rounding The Edges And Making And Finishing The Outlet Complete. A) 110Mm 12.22 7.00 Nos. 223.68 214.73 1503.13 3 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50X50Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. A) 110Mm 12.43.2 20.00 Nos. 278.47 267.33 5346.54 4 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I)Single Socketed Pipes. 110 Mm Diameter 12.41.2 Rm. 283.04 271.72 5 Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Cast Iron Grating 15 Cm Diameter And Weighing Not Less Than 440 Grams. Dsr-12.44 8.00 Nos. 41.02 39.38 315.06 6 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Nsr 20.00 Rm. 485.00 465.60 9312.00 B) 90Mm Dia P.V.C. Pipe Nsr 25.00 Rm. 390.00 374.40 9360.00 6 Providing & Fixing Upvc Floor Trap Of Self Cleansing Design With Cp Jali Complete In All Respects. (Make : Supreme / Finolex / Prince) P-Trap Type Floor Trap 110 X 90 Mm Nsr 12.00 No. 195.00 187.20 2246.40 7 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/Accessories For Unplasticised Rigid Pvc Pipes Including Jointing With Seal Ring Leaving 10 Mm Gap For Thermal Expansion.. (Make : Supreme / Finolex / Prince) Door Tee 110X110X110 Mm Nsr 2.00 No. 280.00 268.80 537.60 110X110X90 Mm Nsr 2.00 No. 200.00 192.00 384.00 Bend 110 Mm Nsr 2.00 No. 170.00 163.20 326.40 Soil Waste & Vent Pipes And Fittings - Ii 90 Mm Nsr 2.00 No. 160.00 153.60 307.20 1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.Lls Etc. (Internal Work) I) Exposed On Wall A) 32Mm Nominal Dia Pipe 18.9.4 30.00 Rm. 328.94 315.78 9473.44 3 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Outer Dia Pipes 18.7.3 20.00 Rm. 301.15 289.11 5782.13 4 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testiang Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work Including Cutting Chases And Making Good The Walls Etc. A) 15Mm Dia Nominal Outer Dia Pipes 18.8.1 70.00 Rm. 373.34 358.40 25088.28 B) 20Mm Dia Nominal Outer Dia Pipes 18.8.2 20.00 Rm. 403.19 387.06 7741.18 C) 25Mm Dia Nominal Outer Dia Pipes 18.8.3 Rm. 470.42 451.60 5 Providing & Fixing G.I. Pipes Complete With G.I. Fittings & Clamps Including Cutting & Making Good The Walls Etc. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Bore (Medium Duty) Dsr-18.10.3 20.00 Rm. 413.76 397.21 7944.21 Ii) Concealed Pipe Including Painting With Anticorrosive Bitumatic Paint, Cutting Chases And Making Good The Wall. A) 15Mm Dia Nominal Bore Dsr-18.11.1 15.00 Rm. 435.32 417.91 6268.65 2 Painting G.I. Pipes And Fittings With Synthetic Enamel White Paint Over A Ready Mixed Priming Coat, Both Of Approved Quality For New Work. A) 15Mm Dia Nominal Bore. Dsr-18.38.1 15.00 Rm. 14.55 13.97 209.51 B) 25Mm Dia Nominal Bore. Dsr-18.38.3 10.00 Rm. 22.69 21.78 217.79 2 Providing And Fixing 45 Cm Long Unplasticised Pvc Connection Pipe With Brass Unions. A) 15Mm Nominal Bore Dsr18.21.2.1 4.00 Nos. 73.31 70.38 281.51 5 Providing & Fixing Cp Brass Bib Cock Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.49.1 7.00 Nos. 380.09 364.88 2554.19 6 Providing & Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. A) 15Mm Nominal Bore 18.51.1 7.00 Nos. 599.19 575.22 4026.57 7 Providing & Fixing C.P. Brass Angle Valve For Basin Mixer And Gyser Points Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.53.1 14.00 Nos. 430.71 413.48 5788.75 8 Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality. A) 25Mm Dia Nominal Bore 18.17.1 2.00 Each 466.78 448.11 896.23 B) 32Mm Dia Nominal Bore 18.17.2 1.00 Each 517.18 496.50 496.50 C) 50Mm Dia Nominal Bore 18.17.4 Each 769.96 739.16 Water Supply Pipes And Fittings - Iii 9 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete 20Mm Dia Nominal Bore 18.18.2 1.00 Each 346.86 332.99 332.99 A) 25 Mm Nominal Bore 18.18.3 2.00 Nos. 348.03 334.10 668.21 10 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Of Approved Brand And Manufacture With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 18.48 A) Circular Tank 18.48 2500.00 Ltrs 8.25 7.92 19799.33 11 Providing And Fixing Stone Slab Table Rubbed, Edges Rounded And Polished Of Size 75X50Cm Deep And 1.8Cm Thick Fixed In Urinal Partitions By Cutting A Chase Of Appropriate Width With Chase Cutter And Embedding The Stone In The Chase With Epoxy Grout Or With Cement Concrete 1:2:4 (1Cement: 2Coarse Sand: 4Graded Stone Aggregate 6Mm Nominal Size) As Per Direction Of Engineerin-Charge And Finished Smooth. 8.10 Granite Stone Of Approved Shade Dsr-8.10.2 1.08 Sqm. 3038.79 2917.23 3150.61 1 Providing & Fixing Soil, Waste And Vent Pipes. A) 100Mm Dia Centrifugally Cast Iron S & S Pipe. Dsr17.35.1.2 6.00 Rm. 885.53 850.11 5100.67 2 Providing Lead Caulked Joints To Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes & Fitting Of Diameters. A) 100Mm Dsr-17.58.1 2.00 Each 466.86 448.18 896.37 3 Providing & Fixing M.S. Holder Bat Clamps Of Approved Design To Sand Cast Iron/Centrifugally Cast (Spun) Iron S & S Pipe Embeded In & Including Cement Concrete Blocks 10X10X10Cm. Of 1:2:4 Mix (1 Cement : 2 Coarse : 4 Graded Stone Aggregate 20Mm Nominal Size). Including Cost Of Cutting Holes & Making Good The Walls Etc. A) For 100Mm Dia Pipe. Dsr-17.37.1 2.00 Each 272.13 261.24 522.49 4 Providing & Fixing Cast Iron Trap Of Self Cleansing Design With Or Without Ventarm Complete, Including Cost Of Cutting & Making Good The Walls & Floors. A) 100Mm Inlet & 75Mm Outlet. Dsr17.60.2.1 1.00 No. 1481.31 1422.06 1422.06 5 Providing & Fixing Cast Iron Coller. A) 100Mm Dia. Dsr17.57.1.2 2.00 No. 384.85 369.46 738.91 6 Providing And Fixing Plain Cast Iron S & S Sanitary Bend. A) 100Mm Dsr17.39.1.2 2.00 Nos. 427.52 410.42 820.84 1 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Mr 7.50 M 485.00 465.60 3492.00 2 Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber With F.P.S. Bricks Of Class Designation 75 And Water Tight C.I. Cover With Frame Of 300 X 300Mm. Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design. A) 150 X 100 Mm. Size P Type With Sewer Bricks Conforming To Is : 4885 Dsr-19.4.2.1 1.00 Nos 2050.58 1968.56 1968.56 Soil Waste & Vent Pipes And Fittings - Ii Schedule Of Quantities For Internal Sewerage System - Iv 3 Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Rcc Top Slab With 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement :4 Coarse Sand :8 Graded Stone Aggregate 40Mm Nominal Size) Inside Plastering 12Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With Floating Coat Fo Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nminal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design 19.7 Inside Size 90X80Cms And 45Cms Deep Including Ci Cover With Frame (Light Duty) 455X610Mm Internal Diamensions Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15Kg). 19.7.1 With Fps Bricks Of Class Designation 150 Dsr-19.7.1.1 1.00 Each 9577.59 9194.49 9194.49 External Sewerage Works 1 Excavating Trenches In All Kind Of Soil Of Required Width For Pipes. Including Excavation For Sockets And Dressing Of Sides, Ramming Of Bottoms, Including Getting Out The Excavated Soil & Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth Including Consolidating Each Deposited Layer By Ramming, Watering, Etc & Disposing Of Surplus Excavated Soil As Directed Within A Lead Of 50M. Up To 1.50 M Depth Pipes 80 Mm To 300 Mm Diameter 2.10.1.2 20.00 Rm 264.10 253.54 5070.79 2 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. 160Mm Dia Under Floor (For External Sewer) Nsr 20.00 Metre 1190.00 1142.40 22848.00 3 Constructing Brick Masonry Manhole With F.P.S. Bricks In Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) Rcc Top Slab With 1 : 2 : 4 Mix (1 Cement : 2 Coarse Sand : 4 Grade Stone Aggregate 20Mm Nominal Size); Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1Cement 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1Cement : 2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size) Finishd With A Floating Coat Of Neat Cement Complete As Per Standard Design Inside Size 90 X 80 Cm & 45 Cm Deep Including Ci Cover With Frame (Light Duty) 455 X 610 Mm Internal Dimension Total Wt. Of Cover & Frame To Be Not Less Than 38 Kg (Wt. Of Cover 23 Kg And Wt. Of Frame 15 Kg) 19.7.1.1 3.00 Nos 9577.59 9194.49 27583.46 4 Extra For Depth For Manhole With F.P.S. Bricks Size 90 X 80 Cm 19.8.1.1 0.30 Rm 6618.83 6354.07 1906.22 5 Providing M.S. Foot Rests Including Fixing In Manholes With 20*20*10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design : With 20 X 20 Mm Square Bar 19.15.1 3.00 Nos 408.51 392.17 1176.51 6 Providing And Fixing Square Mouth S.W. Gully Trap Grade `A Complete With C.I. Grating Brick Masonry Chamber With F.P.S Bricks And Water Tight Ci Cover With Frame Of 300 X 300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design 180 X 150 Mm. Size P Type 19.4.3.1 2.00 Nos 2101.54 2017.48 4034.96 7 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 19.32.1 1.00 Nos 20145.75 19339.92 19339.92 8 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20X10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design With 20X20 Mm Square Bar Dsr-19.15.1 8.00 Nos. 408.51 392.17 3137.37 9 Providing And Fixing S.C.I. Tee 150 Mm At The Inlet And Outlet Of Septic Tank. Dsr-7087 2.00 Nos. 621.00 596.16 1192.32 10 Providing And Fixing Soil, Waste And Vent Pipes:75 Mm Diameter Sand Cast Iron S&S Pipe As Per Is: 1729 Dsr17.35.2.1 3.00 Rmt. 783.54 752.19 2256.58 11 Providing & Fixing Of 75Mm Dia Sand Cast Iron S&S As Per Is - 1729 Terminal Guard. Dsr17.56.2.1 2.00 Nos. 255.52 245.30 490.59 12 Providing & Fixing 75Mm Plane Sand Cast Iron S&S Bend Of Required Drgtee. Dsr17.39.2.1 2.00 Nos. 282.18 270.89 541.78 13 Providing Lead Caulked Joints To Sand Cast Iron/ Cetrifugally Cast (Squn) Irons Pipes & Fitting Of 50 Mm Dia Dsr-17.58.2 2.00 Nos. 394.67 378.89 757.77 14 Providing And Fixing In Position Precast Rcc Manhole Cover And Frame Of Required Shape And Approved Quality.M.D. -10- Circular Shape 500Mm Internal Diameter Dsr19.19.2.2 2.00 Nos. 879.42 844.24 1688.49 1 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.10.3 51.00 Each 1115.37 1070.76 54608.68 2 Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.11 4.00 Each 1187.60 1140.10 4560.39 3 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. Dsr 1.21.1 17.00 Metre 97.32 93.43 1588.26 4 Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls/Hffr Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire Dsr 1.14.1 650.00 Metre 177.15 170.07 110542.86 5 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire Dsr 1.14.2 188.00 Metre 285.12 273.71 51457.72 6 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire Dsr 1.14.3 202.00 Metre 253.94 243.79 49244.67 7 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire Dsr 1.14.4 105.00 Metre 333.78 320.42 33644.59 8 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 A Modular Socket Outlet And 15/16 A Modular Switch, Connections Etc. As Required Dsr 1.32 22.00 Each 445.54 427.72 9409.83 9 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required Dsr 1.34 15.00 Each 99.60 95.62 1434.25 Electrical Works 10 Installation ,Testing, Commissioning Of Wall Bracket /Ceiling Fittings Of All Sizes And Shapes Containing Upto Two Ls/Cfl/Led Lamps Per Fitting, Complete With All Accessories Including Connections Etc. As Required. Dsr 1.35 1.00 Each 90.48 86.86 86.86 11 Supplying, Installation, Testing & Commissioning Of Led Recessed/ Surface Down Lighter (Round/ Square/ Rectangular) Smd Type Of Following Body Material With Pmma And Prismatic Diffuser And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency >85%, Operating Voltage Ac 140-270 Volt, Frequency 50/60 Hz, Operating Temp Range -50C To 400C, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd < 10% , P. F.≥0.95, Ip20, Cri >80, Ugr (Unified Glare Rating) < 19, Flicker Free (Flicker Should Be Below 5%), Life Time (Led, Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends, Cct 3000°K /4000°K / 5700°K / 6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Colour Matching) <3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Confirming To Relevant Bis Standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing Complete In All Respect I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥105 And <120 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C) Powder Coated Die Cast /Extruded Aluminium Body Including Trim 18 Watt Mr 19.00 Each 700.00 672.00 12768.00 12 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required Dsr-5.4 3.00 Each 5681.03 5453.79 16361.37 13 Supplying And Laying 25 Mm X 5 Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) Dsr 5.9 55.00 Metre 109.48 105.11 5780.78 14 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) Single Pole Dsr-2.10.1 9.00 Each 194.64 186.85 1681.68 15 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 6 Way (4 + 12), Double Door Dsr-2.3.1 2.00 Each 1677.24 1610.15 3220.30 16 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 4 Way (4 + 12), Double Door Dsr-2.4.1 1.00 Each 3110.42 2986.01 2986.01 17 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Dsr-2.10.3 2.00 Each 498.76 478.81 957.62 16 Installation, Testing And Commissioning Of Ceiling Fan, Including Wiring The Down Rods Of Standard Length (Upto 30 Cm) With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable, Including Providing And Fixing Phenolic Laminated Sheet Cover On The Fan Box Etc. As Required Dsr 1.45 10.00 Each 257.74 247.43 2474.35 17 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Dsr 1.25 10.00 Each 280.55 269.33 2693.32 18 Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. Upto 450 Mm Sweep Dsr-1.50.1 7.00 Each 342.14 328.45 2299.17 19 Extra For Fixing The Louvers/ Shutters Complete With Frame For A Exhaust Fan Of All Sizes Dsr-1.51 7.00 Each 157.38 151.09 1057.62 20 Supply, Installation, Testing And Commissioning Of Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Metal( Aluminium Alloy) Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Steel/Al Body Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum As Below, 350 Rpm (Tolerance As Per Is : 374-2019), Thd (Total Harmonic Distortion) Less Than 10%, Suitable For Operation With Regulator For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 0C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Ceiling Fan Compliant To Is 374:2019 Fan I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. 9.2.3 10.00 Each 2075.64 1992.62 19926.18 21 Supplying And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cable 1100 Volts Grade At The Depth Of 750 Mm Bellow Ground Level Over A Cushion Of 75 Mm Thick Sand All Around And Protected With Burnt Bricks On Side And On Top .On Surface The Cable Run Shall Be Fixed On Ms Clamps Etc.Of Suitable Size Or As Directed By The Engineer-Incharge ,Complete In All Respect.The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. Following Size 10 Sqmm X 2 Core Mr 164.00 Rm 410.34 393.93 64603.77 22 Supply & Fixing Of 225/230Mm Sweep Ventilating (Light Duty) Exhaust Fan Complete With Metallic Blade (Steel Bird Guard Protector /Copper Motor For High Air Suction Performance /Capacitor Etc.), Noise Level : (45 - 50) Db, Power Consumption : 45 W, Rated Voltage : 230 V, Rated Frequency : 50 Hz, Motor Type : Normal Speed. Complete In All Respect. Mr 7.00 Each 1665.00 1598.40 11188.80 23 Cost For Murals Work 32.40 Sqm 5850.00 5616.00 181958.40 24 Cost For Solar Street Light With 7M Pole Complete 15.00 Nos 22600.00 21696.00 325440.00 25 Cost For C.C. Bench 12.00 Nos 10000.00 9600.00 115200.00 26 Cost For Dustbin 6.00 Nos 4500.00 4320.00 25920.00 1. Trenching In Ordinary Soil Up To A Depth Of 60 Cm Including Removal And Stacking Of Serviceable Materials And Then Disposing Of Surplus Soil, By Spreading And Neatly Levelling Within A Lead Of 50 M And Making Up The Trenched Area To Proper Levels By Filling With Earth Or Earth Mixed With Sludge Or / And Manure Before And After Flooding Trench With Water (Excluding Cost Of Imported Earth, Sludge Or Manure).. (Horti) 2.1 159.24 Cum 74.51 71.53 11389.98 2 Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 5 Km Lead Complete (Earth Measured In Stacks Will Be Reduced By 20% For Payment). (Horti) 2.2 79.62 Cum 491.88 472.21 37597.13 Horticulture 3 Supplying And Stacking At Site Dump Manure From Approved Source, Including Carriage Upto 5 Km Lead Complete (Manure Measured In Stacks Will Be Reduced By 8% For Payment) : Screened Through Sieve Of I.S. Designation 20 Mm (Horti) 2.4.1 106.16 Cum 242.46 232.76 24709.88 4 Spreading Of Sludge, Dump Manure And / Or Good Earth In Required Thickness As Per Direction Of Officer-In-Charge (Cost Of Sludge, Dump Manure And / Or Good Earth To Be Paid Separately). (Horti) 2.8 159.24 Cum 49.94 47.94 7634.64 5 Mixing Earth And Sludge Or Manure In The Required Proportion Specified Or Directed By The Officer-In-Charge (Horti) 2.9 159.24 Cum 34.87 33.47 5330.39 6 Grassing With Selection No.1 Grass Including Watering And Maintenance Of The Lawn For 30 Days Or More Till The Grass Forms A Thick Lawn, Free From Weeds And Fit For Mowing Including Supplying Good Earth, If Needed (The Good Earth Shall Be Paid For Separately). In Rows 5 Cm Apart In Both Directions. (Horti) 2.10.1 530.80 Sqm 16.89 16.21 8604.46 7 Providing And Displaying Of Aglaonema Silver Queen Having 30 Cm To 45 Cm. Ht. With 12 To 15 Leaves, Multi Suckers, Fresh And Healthy Leaves, Well Developed In 25 Cm Dia Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.8 60.00 Each 154.50 148.32 8899.22 (Horti) Dsr 3.8 8 Providing And Displaying Of Aglaonema Dove Variety Having Ht. 30 Cm To 45 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.4 75.00 Each 77.42 74.32 5574.03 (Horti) Dsr 3.4 9 Providing And Displaying Of Aglaonema Marentifolium Variety Having Ht. 23 Cm To 30 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy With Colorful Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.10 50.00 Each 64.54 61.96 3097.83 (Horti) Dsr 3.10 10 Providing And Displaying Of Chamaedorea Elegans Palm Having Ht. 60 Cm To 75 Cm, Well Developed With Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.26 50.00 Each 102.70 98.59 4929.51 (Horti) Dsr 3.26 11 Providing And Displaying Of Croton Baby Golden Variety Having Ht.30 Cm And Above, Well Developed With Full Of Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.28 150.00 Each 39.11 37.55 5632.42 (Horti) Dsr 3.28 12 Providing And Displaying Of Croton Golden (Broad Leaves) Having Ht. 60 Cm To 75 Cm With 3 To 4 Branches, Well Developed, Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.32 150.00 Each 53.81 51.65 7748.01 (Horti) Dsr 3.32 13 Providing And Displaying Of Dieffenbachia Tropic-Snow Having Ht. 60 Cm & Above With 8 - 10 Leaves, Well Developed, Fresh & Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.40 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.40 14 Providing And Displaying Of Dieffenbachia Mosaic Having Ht. 30Cm To 45 Cm With 10-12 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.41 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.41 15 Providing And Displaying Dianthus In Different Colour Well Developed With Fresh & Healthy Foliage 30 Cm Ht., In Full Bloom With Stacking In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.29 50.00 Each 51.79 49.72 2486.05 (Horti) Dsr 4.29 16 Providing And Displaying Gazania Hybrid In Different Colour Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-Incharge. (Horti) 4.31 150.00 Each 61.63 59.16 8874.49 (Horti) Dsr 4.31 17 Providing And Displaying Gaillardia Double Hybrid Variety Well Developed 30 To 45 Cm Ht 20 To 30 Fresh & Healthy Flower With Green Painted Bamboo Stick In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.75 120.00 Each 51.85 49.78 5973.11 (Horti) Dsr 4.75 18 Providing And Stacking Of Plant Mogra Of Height 25 To 30 Cm., 2 To 3 Branch In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.88 100.00 Each 44.03 42.27 4226.60 (Horti) Dsr 4.88 19 Providing And Stacking Of Plant Canna Dwarf Of Height 25 To 30 Cm., 2 To 3 Suckers In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.89 100.00 Each 34.25 32.88 3287.87 (Horti) Dsr 4.89 20 Bush Rose In Different Colour 2 To 3 Healthy Branch 30 Cm And Above Ht. Well Developed With 8 Or More Flowers / Flower Buds In 20 Cm Earthen Pot /Plastic Pot As Per Direction Of The Officer-Incharge. (Horti) 4.90 100.00 Each 24.47 23.49 2349.13 (Horti) Dsr 4.90 21 Providing And Displaying Budded Rose (H.T. Variety) 3 To 4 Healthy Branch 30 Cm And Above Ht. Well Developed With One And Above Flower Plant In 20 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.91 100.00 Each 31.29 30.04 3003.96 (Horti) Dsr 4.91 22 Providing And Displaying Standard Rose (H.T. Variety) 3 To 4 Healthy Branch 90 Cm And Above Ht. Well Developed With One And Above Flowers In 25 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.93 75.00 Each 143.77 138.02 10351.28 (Horti) Dsr 4.93 23 Providing And Stacking Of Plumeria Rubra Of Height 120-150 Cm. With 3-4 Branches And Thick Stem In Big Size Hdpe Bags As Per Direction Of The Officer-In-Charge. (Horti) 7.72 75.00 Each 381.60 366.34 27475.20 (Horti) Dsr 7.72 24 Providing And Stacking Of Polyalthia Longifolia (Ashok) Of Height 180-195 Cm. In Gunny Bag Of Size 30 Cm As Per Direction Of The Officer-Incharge. (Horti) 7.75 75.00 Each 95.40 91.58 6868.80 (Horti) Dsr 7.75 25 Providing And Stacking Of Saraca Indica (Sita Ashok) Of Height 105-120 Cm. In Big Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge. (Horti) 7.80 75.00 Each 76.32 73.27 5495.04 (Horti) Dsr 7.80 26 Providing And Stacking Of Terminalia Arjuna Of Height 150-165 Cm. In Big Polybags Of Size 25 Cm As Per Direction Of The Officerin-Charge. (Horti) 7.88 75.00 Each 57.24 54.95 4121.28 (Horti) Dsr 7.88 27 Providing And Stacking Of Calliandra, Emarginata Of Height 45-60 Cm. In Earthen Pot Of Size 20 Cm As Per Direction Of The Officer-Incharge. (Horti) 8.5 150.00 Each 33.39 32.05 4808.16 (Horti) Dsr 8.5 28 Providing And Stacking Of Nerium Oleander (Kaner) Of Height 60- 75 Cm. With 5-6 Branches In Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 36,885
Government Departments No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
22.
Educational and Research Institute #11309731 AOC
Bids Are invited for Raw Material White Board Marker - Whiteboard Markers Black, Blue, Red And Green 4.43 Mm Bullet Tip Non-Toxic Smooth Writing Easy Wipe , Cleaning Liquid 50Ml - Liquid Cleaning Kit For Laptop For Laptops Computers, Gamingm, Mobiles , Photo Copy Paper A4 - Copier Paper A4 Size 70 Gsm 500 Sheets White Paper, 1 Ream For Laserjet Inkjet Printer Fast Drying Both Side Print Eco Friendly Color , Rj 45 Connector - Rj45 Connector Module Plugs , Mouse Usb Product - Comfort Wired Usb Mouse 3 Button 1000 Dpi Optical Sensor Plug And Play For Windows Mac Black , Keyboard Usb Product - Wired Usb Keyboard Plug Play 105 Button Mouse 1000 Dpi High Precision Advanced Optical Sensor , Cat 6 Cable 305Meter - Colour Gray Connector Gender Male To Male Item Weight 10570 Grams Item Length 305Meter , Stapler 10No Small - Staples Combo Standard Stapler With Quick Loading Mechanism Sturdy Durable For Long Time Use Color May Vary Pack Of 1 , Remote Battery Aaa - Aaa Battery Duracell Devices Clock Toy Remote , Battery Clock Aa - Aa Battery Duracell Devices Clock Toy Remote , Cd - A Compact Disc Cd Is A Digital Optical Disc Data Storage , Dvd - A Compact Disc Dvd Is A Digital Optical Disc Data Storage , Usb-Hub Bus - Ultra Slim Multiport Type C Hub To 1Xusb 3.0 And 3Xusb 2.0 Ports , Vga Cable 1 To 2 - Cable 1 Male Vga To 2 Female Vga Splitter Cable For Laptop, Television, Personal Computer , Curtains - Size 4X6 Silky Cloth , M.S.Flat 50X12mm - Ms Flat Rectangular Ms Flat, For Industrial 50X12mm , M.S.Flat 100X10mm - Ms Flat Rectangular Ms Flat, For Industrial 100X10mm , M.S.Flat 50X8mm - Ms Flat Rectangular Ms Flat, For Industrial 50X8mm , M.S. Electrode 2.5Mm - Welding Rod E6013 2.5 X 350Mm (Mse011) Isi Grade Mild Steel Electrode Rutile Coated Arc Welding Rods For Ac/Dc Easy Strike, Smooth Bead, Low Spatter General Fabrication And Repair , M.S Sheet 3 X 8 X 2.5Mm - Ms Sheet 2.5 Mm Rectangular Mild Sheet For Industrial , M.S Sheet 4 X 8 X 3Mm - Ms Sheet 3 Mm Rectangular Mild Sheet For Industrial , Welding Machine Output Copper Leads 35Mm - Isi Welding Cable 35 Sq.Mm Flexible Isi Certified Copper Welding Cable For Workshop And Fabrication Use , Pvc Gang Box 4X8 Modular - Modular Surface Gang Box, White 4X8 , Pvc Gang Box 4X10 Modular - Modular Surface Gang Box, White 4X10 , Multistandard Copper Wire 4Mm - Pvc Copper Wire 4Mm Pro Fr Electrical Wire, 90 Meter Fire Resistant Single Core Pvc Insulated Pure Copper Wire, Anti Rodent Anti Termite Flexible Wire For Connections Black , Multistandard Copper Wire 4Mm - Pvc Copper Wire 4Mm Pro Fr Electrical Wire, 90 Meter Fire Resistant Single Core Pvc Insulated Pure Copper Wire, Anti Rodent Anti Termite Flexible Wire For Connections Red , Bar Magnet - Enhancing Efficiency And Precision In Manufacturing Processes 4 Inch , Carbon Resitor 01 K - Tolerance 1K Mr Ohm Mf Through Hole Resistors Axial Lead , Diode 1N 4007 - Diode In4007 Passive, Two Terminal Electrical Components That Limit Or Regulate The Flow Of Electric Current In A Circuit , Mcb 63 Tpn With Box - Mcb Single Pole 63 Triple Pole Mcb With Box Isi Marked , Steel Screw 15Mm 100Nos - Screw 15Mm Steel Screw Paster Boards Solid Stainless , Pvc Rawal Plug 3.5Mm - Rawl Plug Heavy Duty Plastic Rawl Plugs Durable Expansion Anchors For Plasterboard, Masonry, Brick And Concrete Wall Fixings For Screws , Wooden Screw 75Mm 100Nos - Screw 75Mm Fixing Wood, Plywood, Paster Boards Solid Stainless , Pvc Cable Clip 6Mm - Pvc White Cable Clip 6Mm , Pvc Cable Clip 10Mm , Pvc Cable Clip 20Mm , 4 Core 2.5Mm Armoured Cable - 4 Core 2.5Mm Armoured Cable Lt Power Cable Insulation Material Xlpe Conductor Material Aluminum Number Of Cores 4 Core Application Power Cable Voltage 1100 V Current Rating 34 To 418 , Pvc Casing Caping 1 Inch 6Ft Length - Pvc Casing N Caping, For Electric Wire Installation 3M , Sand Paper Zero Number - Sanding Paper Emery Paper Sand Paper , Led Bulb 18W - Led Bulb 18W Electric High Glo Led Bulb 18W, B22d Cap, 6500K , Solar Torch - Solar Torch Electric High Glo Led Bulb 18W, B22d Cap, 6500K , Seek Jadhu - Jhadu Seek Jhadu Plastic Wet And Dry Brush (White) , Table Cloth Size 5X3 - Machine Washable Rectangle Tablecover For Office Table , Kachra Bag - Leak Proof And Tear Resistant Trash Bags For Kitchen Home And Commercial Use Dustbin Bags For Dry And Wet Waste With Free Check Duster Cloth -Black , Register 2 Quire - Register 2 Quire, Pages C Ruled Single Line Register For Office Record Keeping , Register 4 Quire - Register 4 Quire, Pages C Ruled Single Line Register For Office Record Keeping , Chalk White - Chalk White A Soft, Porous, Sedimentary Carbonate Rock Primarily Made Of Calcium Carbonate , Duster - Wooden Duster For White Boards, Glass Boards And Chalk Boards , Stepler 24X6 Big - Staples Combo Standard Stapler With Quick Loading Mechanism Sturdy Durable For Long Time Use Color May Vary , Marker Ink 15 Ml - White Board Marker Ink - 15 Ml Suitable For White Board Surface School Stationery Easily Refill Bold Color Smudge Proof Quick Drying , Bill Register - Bill Register 70 Gsm Paper With Hard Binding Cover For Long Durability , Batten Holder 05 - Batten Type, White, Isi Certified, Ideal For Ceiling/Wall Use With Standard , Angle Holder 05 - Angle L Holder Fancy Type 240V White , Pendent Holder 05 - Pendant Bulb Holder For Wall, B22 Batten L Holder For Led/Electric Bulb For Home (White) , Pvc Aluminium Wire 2.5 Mm Single Strand - Aluminium Wire Electric Cable Heavy Duty 2.5Mm 2 Core Aluminium Cable For Electrical Fittings , Kit - Kat Fuse 100A - 100A 415 Volt Ac Porcelain Fuse Units (Kitkat Fuse) , Winding Wire Copper 32 Swg - Enameled Copper Wire - 32 Gauge (0.27 Mm Diameter) - 99.9% Pure Copper Wire - Winding Wire , Winding Wire Copper 35 Swg - Enameled Copper Wire - 35 Gauge (0.27 Mm Diameter) - 99.9% Pure Copper Wire - Winding Wire , Winding Wire Copper 36 Swg - Enameled Copper Wire - 36 Gauge (0.27 Mm Diameter) - 99.9% Pure Copper Wire - Winding Wire , Cotton Winding Tape - Cotton Tape For Winding Insulation And Multipurpose Use , Winding Sleev Umpire 01 No - Fiberglass Insulation Sleeve 1Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 02 No - Fiberglass Insulation Sleeve 2Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 03 No - Fiberglass Insulation Sleeve 3Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 04 No - Fiberglass Insulation Sleeve 4Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 05 No - Fiberglass Insulation Sleeve 5Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Sand Paper 00 To 01 No - Sandpaper, 9 X 11 Inches, Silicon Carbide, Ultra Fine Grit 60, Foam Backed, Compatible With Sanding Block, Suitable For Metal, Wood, Plastic , Winding Paper Millinex Paper - Insulation Paper Sheet Class F 155Degree C Electrical Insulation Paper Flame Resistant High Dielectric Aramid Sheet For Motor And Transformer , Lock 55Mm - Lock 55Mm Combinations Steel Body Hardened Shackle 8 Brass Levers Made In India Padlock 3 Silver Keys , Coolent - Hybrid Tech Antifreeze Coolant For Bikes Ready To Use Radiator Fluid, Prevents Overheating Corrosion, Long-Lasting Engine Protection , Gardening Pipe 1Inch - Gardening Pipe 1Inch Heavy Duty 3 Layered Braided Pipe 30 Meter Long Water Hose Pipe Pvc Braided Pipe Green Garden Outdoors Pipes With Hose Connector , Saddle Patti - Plastic Saddle Cl 25Mm , Metal Mcb Channel Patti - Mounting Rail 35Mm X 7.5Mm Slotted Galvanized Steel Channel For Electrical Panels, Terminal Blocks, And Mcb Mounting , Pvc Clip 6Mm - Pvc White Cable Clip 6Mm , Pvc Flexible Coper Wire 4Mm - Pvc Flexible Coper Wire 4 Sqmm 90 Meter Copper Wire Hrfr Heat Resistant Flame Retardant Lead-Free Cable Low Smoke Halogen-Free Wire For Home And Industrial Electrical Wiring , Pvc Flexible Coper Wire 1.5Mm - Pvc Flexible Coper Wire 1.5Mm Electrical Wire, 90 Meter Fire Resistant Single Core Pvc Insulated Pure Copper Wire, Anti Rodent Anti Termite Flexible Wire For Connections (Black , Screw 4Inch - Ms Screw 6 X 100 Mm (4 Inch) , Soldering Iron 65Watt - Heavy-Duty 65 Watts Soldering Iron With Pvc Wire And Copper Tip , Upvc Pipe 3X4inch - Upvc Water Pipe Of Size 3X4inch , Upvc Elbow 3X4inch - Upvc Elbow 3X4inch Fittings Elbow 90 Degree 3Inch White , Upvc Tee 3X4inch - Plain Upvc Tee For Plumbing Pipe 3X4 Inch , Upvc Solvent 200Grm - Pvc Heavy Body Solvent For Pvc Larger Dia Pipes And Fittings , Taflon Tape - Plumbing Gas And Thread Sealing Ptfe Leak-Proof, Multi-Purpose Sealant Tape , Pvc Cl Pipe 3X4inch - Pvc U Shaped Pipe Cl S With Flat Nail Ivory Wire And Tube Holder Durable Pipe Clip , Upvc Union 3X4inch - Upvc Union Pipe Fitting, 1.9 Cm 3X4 Inch, White , Upvc Socket Adapter 3X4inch - Upvc Reducing Socket 3X4 Inch To 1X2 Inch White , Upvc Reducing Adapter 1Inch To 3X4inch - Upvc Reducing Socket 3X4 Inch To 1X2 Inch White , Upvc Brass Elbow 3X4inch To 1X2inch - Upvc Brass Elbow For Pipe Fitting 3X4 X 1X2 Inch , Upvc Ball Valve 3X4inch - Upvc Compact Ball Valve 3X4inch 25Mm , Upvc Tank Adapter 3X4inch - Upvc Socket Tank Connector 3X4inch , Steel Tap 1X2inch - Stainless Steel Long Body Taps For Bathroom And Kitchen Taps With Chrome Finish And Quarter Turn Fitting , Water Tank 2000Lit 6 Layer - Water Tank 2000 Lit Six Layer Water Tank 2000 Liter Capacity Blow Mould Tanks Food Grade Antibacterial, Uv And Heat Resistant Tank Hdpe Material White Color , Water Tank 1000Lit 6Layer - Water Tank 1000 Lit Six Layer Water Tank 1000 Liter Capacity Blow Mould Tanks Food Grade Antibacterial, Uv And Heat Resistant Tank Hdpe Material White Color , Upvc Pipe 1Inch - Upvc Water Pipe 1 Inch , Upvc Elbow 1Inch , Upvc Tee 1Inch , Upvc Socket Adapter 1Inch , Upvc Union 1Inch , Pvc Cl Pipe 1Inch , Upvc Tank Adapter 1Inch , Upvc Ball Valve 1Inch , White Board 4X6 - Whiteboard Drywipe Magnetic With Pen Tray And Aluminium Trim, 4 Ft X 6Ft , Casing Patti 2Inch - Cassing Patti 2Inch Designed For Surface-Mounting Electrical Wires , Big Bucket - Big Bucket Industries Unbreakable Strong Plastic Bathroom Bucket 12 Ltr , Wooden Beat 3X4inch Half Round - Half Round Wooden Moulding Beat Patti For Furniture Rack Side Fitting , Nails 1Inch - 1Inch Steel Concrete Nails , Ms Round Bar 30Mm - Ms Round Bar 30 Mm Black Mild Steel Round Bar , Ms Round Bar 40Mm - Ms Round Bar 40 Mm Black Mild Steel Round Bar , Ms Round Bar 45Mm - Ms Round Bar 45 Mm Black Mild Steel Round Bar , Ms Round Bar 50Mm - Ms Round Bar 50 Mm Black Mild Steel Round Bar , Ms Round Bar 60Mm - Ms Round Bar 60 Mm Black Mild Steel Round Bar , Ms Round Bar 65Mm - Ms Round Bar 65 Mm Black Mild Steel Round Bar , Mobile Oil 40No. - Mobile Oil 40No. Engine Oil For Diesel Engine , Cutting Oil - Cutting Oil Water Soluble Cutting Oil , Power Saw Blade 1Inxh X 14Inch - Power Hexa Blade (14Inchx1inchx0.050Inch) Hss Bimetal Power Hacksaw Blade , Hand Hacksaw Blade 1X2x12inch - Hand Hexa Blade 1X2inchx1x2inchx0.050Inch Hss , Emery Paper 80No. - Emery Paper 80No. Coarse Brown Sandpaper For Wood, Metal, Walls And Diy Finishing Medium Size, Emery Material, Paper Backing , Emery Paper 100No. - Emery Paper 100No. Coarse Brown Sandpaper For Wood, Metal, Walls And Diy Finishing Medium Size, Emery Material, Paper Backing , Wire Bursh 4Inch - Steel Wire Brush With Plastic Handle, 5 Rows , Chalk Clolour - Color Chalks Limestone Slate Pencils Chalk Piece Full , Grease - Grease Long Lasting Lubricant For Cars, Buses, Trucks, 2 Wheeler, 3 Wheeler, Agriculture And Construction) , File Card - Abrasive File Card With Wooden Handle , Engine Oil - Engine Oil 20/40No. Engine Oil For Diesel Engine , Service Cable 3 Core 4Mm Flat , Weight Machine 500Kg. Platform Size 2X2 - Electronic Platform Weighing Scale 600X600mm Mild Steel 500Kg Capacity, 50G Accuracy Oiml R76 Compliant, Iso Certified Digital Weight Machine For Shop, Warehouse, Industrial Use , Ladder 20Ft Foldable Type - Aluminum Wall Support Extension Ladder , Router 4G Lte Wireless Dongle , Switch 8 Port 1000Mbps Gigabit - 1000Mbps Full Duplex 8 Port Gigabit Switch Hub Lan Gigabit Ethernet Desktop Network Switches Black Total Quantity : 4361
Contract Date: Ref. Documents Contract Value : 11.85 Lakh
Boards / Undertakings / PSU No of Bidders 4
Madhya Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 7.44 Crore
Boards / Undertakings / PSU No of Bidders 6
Uttar Pradesh View Result →
24.
Railways #11305322 AOC
Supply Of set of drawer sliding channels , set of drawer sliding channels, one set consisting of 01 pair 16 inch and 01 pair 20 inch extr a heavy duty telescopic ball bearing drawer sliding channels, side mounted type, manufactured from pre mium quality high tensile crca steel with extra thick section and superior zinc plated/corrosion resistant fi nish. channel shall be industrial heavy duty grade with precision steel ball bearing mechanism ensuring sm ooth, silent, anti-jamming and jerk free full extension movement under continuous operation. the assembly shall be specially suitable for railway coach drawers, cabinets, modular furniture, tool boxes and heavy vibr ation service conditions. channel shall have reinforced body construction, high load carrying capacity, anti- sag performance, strong locking stability and long operational life. mounting holes shall be reinforced/slotte d type for rigid and secure installation. supply shall be complete in set consisting of lh & rh channels for e ach size i.e. 01 pair 16 inch and 01 pair 20 inch. suitable high tensile zinc plated/self-tapping mounting scre ws of required quantity and compatible size for complete installation of channels shall be supplied along wit h each set. material shall be free from sharp edges, burrs, rust and manufacturing defects. oem test certifi cate/quality certificate to be provided along with supply. warranty: 05 years from the date of supply/install ation against manufacturing defects, premature failure and performance issues. [ warranty period: 30 m onths after the date of delivery ] ]
Contract Date: Jun 18, 2026 Contract Value : 96,382
Government Departments No of Bidders 1
Madhya Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 72,100
Government Departments No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 92,040
Government Departments No of Bidders 4
Maharashtra View Result →
30.
Housing Urban and Rular Development #11286216 AOC
Tender For Construction Of New Primary Health Center (Phc New Bldg) At Perumalmalai H/O Adukkam, Kodaikanal Block.; 2 Clearing lightjungle vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 3 Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. 4 Supplying and filling in foundations and basement with fillingM sand in layers not exceeding 15 cm. thick, well watered ,rammed and consolidated etc. complete complying with standard specifications. 5 Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement. 6 Refilling the approved good quality earth in plinths, area development etc. wherever specified in layers is not exceeding 200 mm thick, with available earth at site. 7 Supplying and filling of good earth filling locally available earth transported from the outside including consolidation,leveling specifiedin layers of not exceeding 200 mm thick., etc. complete. 8 Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid). 9 Upto Basement 10 Ground Floor 11 First Floor 12 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement ratio with plasticizer using 20mm and down concrete structural elements under controlled water graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the depart- mental officers comple.-1m3 13 Foundation & Basement 14 Ground Floor 15 First Floor 16 Steel - Fe 500D : Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers. 17 Brick work in following Cement Mortar 1:5 using best quality Country bricks of size 83/4 x 41/4 X2 3/4 for foundation and basement including curing etc., complete complying with standard specification. Including scaffolding curing cost of reinforcement etc. all complete as per specifications and drawings as directed by the Engineer in-charge. 18 Foundation basement 19 Ground floor 20 First floor 21 Brick partition walls of 11.50cm thickness using best quality Country bricks of size 83/4 x 41/4 X2 3/4in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately). 22 Ground Floor 23 First Floor 24 PLASTERING WORK 25 Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing.The Surface shall then be allowed to dry for atleast 48 hours.It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface.Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete].The Putty shoule be got approved by the Executive Engineer before use on work. 26 Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and ThreeM.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers 27 Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface,chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent andas directed. 28 FLOORING AND DADOOING 29 Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved color, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same color pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works).Basic Cost-Rs.776/sq.m 30 Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works).Basic cost-Rs.464/sq.m 31 Dadooing the walls with colouredDadooing Ceramic tiles of size 150mm x 150mm x 6mm approved size , quality and colour set in CM 1 : 2 - 10 mm thk. And pointed with suitable cement including finishing the joint and pointing flesh with walls and tile surfacein all floors at the rate of 0.40 Kg /Sqm etc. complete. 32 Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works). 33 Providing, fabricating and fixing M.S. grillsWindows,and ventilator, gates, ladders, rail pipes, nosing angles, with M.S.lugs in staircase steps etc., made out of M.S rods, flats, angles, pipes, channels etc. including necessary fixtures complete as per drawings and specifications and as directed by the Engineer. 34 S.S Handrail 35 Manufacturing,supplying and fixing of stainless steel handrails for staircase using 50mm dia 304L grade stainless steel pipe of 1.6mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1mm thick as vertical at 900mm centre with 2 Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.6mm thick in between.The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance,electrical charges,ect.complete. 36 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete 37 Supply and Fabrication of UPVC doorincluding cost and conveyance of all charges etc complete. 38 Solid PVC door shutters Toilet door using 19 Gauge 19mm MS square tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings.The over all size of styles shall be 50mm x 30mm.The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. 39 UPVC Windowsupplying and fixing UPVC ( Un-PLASTICIZED Polyvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with g/1mm 125GSMand 100% corrosion free, the profiles are multi chambered sectionwith wall thick of 2mm. The EPDM rubber (black color) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power points locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed or plainglass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and shouldhave key lockable action, security protective hinges, strong lockingsystems and as per sizefor arrestingnoise and energy loss. 40 UPVC VENTILATOR: Supplying and fixing UPVC ( Un-PLASTICIZED Polyvinyl chloride)Louvered Ventilators of from the profile the size of outer frame 60x58mm and shutter profile the size of 60x78mm both profile size of 60x78mm both profiles are reinforced with GI/1MM 125GSMand 100% corrosion free , the profile are multi chambered sections withwall thick of 2mm. The EPDM rubber (black color) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiation pin headed glass 4mm thick should be fixed to the wall with 100% packing with screws and silicon packing all around the frame. The ventilator should be got approved from the Executive Engineer before use on work. 41 PAINTING WORK 42 Painting two coats of synthetic Enamel paint of approved colour and make over one coat of anti corrosive Zinchromite primerover new wood / steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filler etc. including cost of filler, primer, paint all complete as per drawings and specifications. 43 Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the wallssmooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification.(The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). 44 Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. 45 Weathering Course Concrete using best quality broken brick jelly of 20 mm uniform gauge in pure slaked lime ( NO Sand to be used ( over the RCC roof slab in the proportion of brick jelly to lime being 32 : 121/2 by volume laid over in single layer and consolidated to the required slope and finished thickness and beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime, jiggery water etc. complete complying with standard specifications and as directed 46 Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. 47 Plumbing Work 48 Supplying and fixing of Indus floor mounted white colour European water closet Parryware or equivalent, with seat cover and dual flush (3 & 6 lit) cistern having P trap withseat cover, supplyingnon corrosive hinges, CP bolts, nuts, washers, providing and fixing dash anchor fastners with bolts / L -brackets with anticorrosive paint cutting grooves in masonry or concrete surfaces, groutingwith cement concrete 1:2:4 mix, using 20mm size stone jelly,restoring the damaged portion to their original condition using required materials,fixing the water closet to perfect level,alignment,testingetc.complete. 49 Providing and keeping in stores, shifting to the place of installation, fixing,testing and commissioning ofwhite coloured vitreous china under counterRegular rectangular wash basin with brackets/ G.I. rag bolts and nuts painted,32mm dia brass C.P. waste coupling, (heavy) 32mm diabrassC.P.bottletrap,15mmdiabrassC.P.Anglestopcockwith flange, 15mm dia brass C.P. coldwater connecting pipe, etc., The work shall include,required extension nipples, cutting / chasing and making good the walls and floors- toilets. Wash Basin 50 Supply & Fixingat sitein position 15mm dia C.P brass BIB COCKS long body with wall flangeincludingcuttingandmakinggoodthe wallswhereverrequired 51 Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc.,complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). 52 Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks). 53 Supplying and fixing in positionC.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.(D) 54 Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition,including testing for any leakages,etc.,complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). 55 a) 40mm dia. 6kg class PVC pipes. 56 b) 50mm dia. 6kg class PVC pipes. 57 c) 75mm dia. 6kg class PVC pipes. 58 d) 110mm dia. 6kg class PVC pipes. 59 Supplying and fixing in position cost iron Nahini / Floor trap with Stainless steel grating / PVC nahini / Floor Trap with PVC Grating type of size 100 x 75 / 75 x 50 mm with best quality gratings of approved brand fixed over a bed of brick jelly lime concrete 1;2;5 (One lime two sand and five aggregate ) brick jelly 40mm and finishing with cm 1;3(One cement and three sand) including dismantling masonary wherever found necessary and making good to the original condition and giving connections to the cast iron pipe etc, complete complying with standard specififcation and as directed by the departmental Officers. 60 Supply and fixing in position best quality PVC IS 4985 - CLASS-II - 4 Kg/Sqcm -Rain water pipes of various size having ISI mark and providing leak proof joints with such asBend, Tee Junction, door etc.,of approved qualityincluding fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, wherever necessary and making chipping good to the original condition, complying with standard specification etc.,complete. 61 b).110mm dia. 4kg class pipes. 62 Supplying and fixing in position of the following dia PVC rain water gratings for rain water pipes ,of approved quality and varietyof various size confirming to ISS andincluding necessary cutting and fixing and giving connection to PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer. 63 110mm dia 64 Supplying and fixing in position of the following dia PVC specials such asPVC vent Cowl etc.,of approved quality and varietyof various size confirming to ISS amend providing leak proof joint etc., including necessary cutting and fixing and giving connection to PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer. 65 a)75mm Dia 66 b)110mm Dia 67 PART-C - EXTERNAL DRAINAGE 68 Soil/ Waste Pipes 69 Supply and fixing in position best quality PVC IS 4985 - CLASS- III - 6 Kg/Sqcm -Soil/ waste pipes of various size with approved quality and varietyof various size confirminghaving ISI mark and providing leak proof joints including erection of below groundwith excavation and refilling etc.,and making connection to Manholes /Gully trap,wherever necessary and making chipping good portion to the original condition,complying with standard specification etc., complete. 70 160mm dia. 6kg class III-pipes. 71 Supply, laying and erction of glazed stone ware gully trap (100 x 75 mm) with 100 mm dia, outlet including embedding trap in cement concrete 1:3:6 and constructing chamber of size 300 x 300 mm inside clear in brick masonry 230 mm thick, plaster with water proof cement mortar (1:3) 15 mm thick on both internal and external surfaces inside finished with floating coat of neat cement. The work including excavation to required depth of gully trap and refilling and making good in the surface withProviding and fixing SFRC frame and cover 400 x 400 mm (clear opening) complete complying with std.specification. 72 Supplying and Erection and construction of sewer chambers of required internal dimensions 600x600 upto 0.6 mtr.depth with 230mm brick masonry in C.M.1:5 thk of masonry over bed of1:2:4 R.C.C. 200 mm thk bove 100 mm thk P.C.C.1;3:6 Cement concrete foundations over sand bed of 100mm thk channelling in 1;2:4 cement concrete, plastering in 1:3 cement mortar for internal and external surface finished with floating coat of neat cement, the work including excavation for required depth of gully trap and refilling and making good in the surface with SFRC cover and frame 600x600mm (clear opening)complete complying with standard specifications etc., 73 Construction of rain water recharge well of 1200mm dia and depth upto 1500mm, in addition 110 dia special blue slotted pipe for bore well.pipe should be laid from bottom of ring well centre to below 1500mm as shown in the drawings,including all types of excavation, occur for pipe,filling of rain water harvesting materials with construction of R.C.C. ring and top 100mm RCC SLAB WITH 450X450mm perforated SFRC manhole and 230mm brick wall in 2height with below 300mm lengthx100mm thk P.C.C. as per the structural filling the filter media as per drawing. 74 Supplying and fixing of PVC water storage tank of best approved quality and make of super thick with lid ofcapacity of 2000 litres with accessories including giving necessary connection etc., complete as directed by the departmental officer. (The PVC water storage tank should be got approved by the Engineer before use on work)(TWAD- Pano:173) 75 provision for rainwater harvesting structure 76 Electrification 77 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) 78 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End 79 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End 80 Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.) 81 Supply and fixing of fancy glass shade and 7W / 9W LED bulb 82 Supply and fixing of single box type 440W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting 83 Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch 84 Supply and fixing of 1200mm (48) AC ceiling fan complete with stepped electronic 300W regulator with 300mm down 85 Supply and fixing of 300mm (12) sweep (light duty) AC exhaust fan complete without provision of hole in the wall 86 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End 87 Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End 88 Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earthconnection (For AC Plug) 89 Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End 90 Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End 91 Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipeconcealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of theconcealed portion with suitable colour 92 Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. 93 Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVCrigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitablecolour 94 Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 6 sq.mm copper wire with painting of suitablecolour 95 Supply and run of 1 of No.8 SWG GI wire for earth connection 96 Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earthconnection 97 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 40mm 98 Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2 x 1-1/2 x 1/4 rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1 x 1/4 with inter connection of EB meter tofuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Lower End) with suitable necessary connection with earth connection complete 99 Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only 100 Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing 101 Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection 102 Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection 103 Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 104 Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 105 Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good 106 Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 107 Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 108 Septic Tank 109 Earthwork for foundationsand depositing on bank with initial lead of 10 Mt. and initial lift of 2 Mt. in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soilincluding excavated earth. 110 Supplying and filling in foundation and basement with M sand in layers of not more than 10cm thick well watered, rammed and consolidated etc., complete as per standard specification. 111 Laying the Plain Cement concrete 1:4:8(One cement four sand and eight brokenMachine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.The rates inclusive of Centering , shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts and curing etc.. 112 Supplying and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) 113 REINFORCED CEMENT CONCRETE M25 1:1.5:3 mixusing 20mm machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 (One cement and three sand ) and Kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers. 114 Brick work in following Cement Mortar using best quality of Country Bricks of size 8-3/4 x 4-1/4 x 2-3/4 for foundation and basement including curing, etc., complete complying with standard specifiction. 115 Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally and externally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or champhering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface,chiseling the undulated surface wherever necessary and curing, etc., all materials and labour complete in all respects including all lead, lift and descent andas directed. 116 Supplying and fixing in position C.I.Manhole covers (heavy duty) mof various sizes of best approved quality and as per standard specificationsetc., complete.0.6X0.6M Size etc., complete. 117 Providing, machine mixing and laying on the P.C.C/ R.C.C. surface in approved panels of25 mm thick granolithic flooring in cement concrete mix of 1:2:4 (1 Cement: 2 Sand: 4 Aggregate 10 to 12 mm thick)well vibrated,compacted including 45 X 3 mm glass dividing strip, fixed to correct level and finished smooth and cured by keeping surfaces well-covered and protected against excess of an type. (The contractor to provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond and any curling, lifting or beybonding noticed shall be rectified by the contractor at his cost). 118 Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication. 119 Under Ground Sump 120 Earthwork for foundationsand depositing on bank with initial lead of 10 Mt. and initial lift of 2 Mt. in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soilincluding excavated earth. 121 Supplying and filling in foundation and basement with M sand in layers of not more than 10cm thick well watered, rammed and consolidated etc., complete as per standard specification. 122 Laying the Plain Cement concrete 1:4:8(One cement four sand and eight brokenMachine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.The rates inclusive of Centering , shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts and curing etc.. 123 Supplying and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) 124 Reinforced Cement Concrete 1:11/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers 125 Providing and applying 10 mm thick Cement plaster in Cement mortar 1:3 ( One part of Cement and Three parts of Sand ),to finishing the exposed surfaces of R.C.C. items of works such as Roof (or) floor slabs, beams,and Sun shades etc.to correct plane and l 126 Providing, machine mixing and laying on the P.C.C/ R.C.C. surface in approved panels of 25 mm thick granolithic flooring in cement concrete mix of 1:2:4 (1 Cement: 2 Sand: 4 Aggregate 10 to 12 mm thick)well vibrated,compacted including 45 X 3 mm glass dividing strip, fixed to correct level and finished smooth and cured by keeping surfaces well-covered and protected against excess of an type. (The contractor to provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond and any curling, lifting or beybonding noticed shall be rectified by the contractor at his cost) 127 Supplying and fixing in position C.I.Manhole covers (heavy duty) of various sizes of best approved quality and as per standard specificationsetc.,complete.0.6X0.6M Size etc., complete. 128 PVC mould CI steps for sump 129 Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication. 130 Aluminium ladder for maintenance over the Roof top 131 Provision for lab interior 132 Tactile Flooring and Braille Sign Board 133 Provision for Sitting bench and Cubboard Arrangements 134 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}
Contract Date: Jun 13, 2026 Contract Value : 1.68 Crore
Local Bodies No of Bidders 2
31.
Heavy Industries and Public Enterprises #11283915 Technical Bid
Tender for Manufacturing, Inspection, Testing, Painting, Packing, Transportation, Delivery In Flawless Condition Etc. Of Mandatory Spares For Cpu System And Water Treatment Packages At 3X660 Mw North Karanpura Super Thermal Power Project, Tandwa, Jharkhand.. , Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Pser Kolkata Name Of Work: Manufacturing, Inspection, Testing, Painting, Packing, Transportation, Delivery In Flawless Condition Etc. Of Mandatory Spares For Cpu System And Water Treatment Packages At 3X660 Mw North Karanpura Super Thermal Power Project, Tandwa, Jharkhand.. E-Tender No.: Pser:Pur:Pmx:498 :26 (Enq:26:Pp:0346:Pur:01) Date: 23/04/2026. Price Schedule (Rev-00) Name Of The Bidder/ Bidding Firm / Company : Note: 1) Taxes & Duties Shall Be As Per Scc. 2) Gst & Bocw Cess Shall Be Paid Extra, As Applicable. 3) Evaluation Of Bid Shall Be Based On Total Lump Sump Firm Price Inclusive Of All Prvailing Taxes ,Duties And Other Levies But Excluding Gst For Manufacturing ,Inspection,Testing,Painting,Packing,Transportation,Delivery In Flawless Condition Etc Of Mandatory Spares For Cpu System And Water Treatment Packages For The Total Scope Defined As Per Bhel Nit & Tender Technical Specification ,Amendement & Agreement Till Placement Of Order At 3X660 Mw North Karanpura Super Thermal Power Project,Tandwa, Jharkahnd (Total Price To Be Quoted For All Items Mentioned In Annexre-P Of Nit) . Item Wise Break-Up Of Total Final Price Of Mandatory Spares Mentioned In Annexure-P Of Nit Shall Be Obtained From L1 Bidder Before The Placement Of Order. 4) Any Other Document (If Uploaded By Bidder) In Price Bid/Schedule Apart From Tendered Price Schedule Shall Not Be Taken Into Cognizance For Evaluation Of Offer.Any Modification In Price Schedule In Any Way By Bidder Is Not Acceptable & Shall Be Considered As Tampering Of Tender Document. 5) Bidder To Quote Price In The Column Unit Lump Sum And Firm Price (In Inr) Including All Taxes & Duties, But Excluding Gst & Bocw Cess I.E.[Basic Charges + Freight 6. Bidders Quoted Rate/Price Shall Remain Firm For Offer Validity Period. 8. Bidder Shall Note That In Case Gst Credit Is Delayed/ Denied To Bhel Due To Delayed / Non Receipt Of Goods And /Or Tax Invoice Or Expiry Of The Timeline Prescribed In Gst Law For Availing Such Itc, Or Any Other Reasons Attributable To The Bidder, Gst Amount Shall Be Recoverable From The Bidder Along With Interest Levied / Leviable On Bhel, As The Case May Be. 9. Gst With Applicable Cess, Legally Leviable & Payable By The Successful Bidder As Per Gst Law, Shall Be Paid Extra By Bhel. Hence, Bidder Shall Not Include Gst With Applicable Cess In Their Quoted Price. 10.Transit Insurance Shall Be In The Bhel Scope. Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Description Of Work Item Code / Make Quantity Unit Of Measurement Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Unit Lump Sump Firm Price Inclusive Of All Prvailing Taxes ,Duties And Other Levies But Excluding Gst For Manufacturing ,Inspection,Testing,Painting,Packing,Transportation,Delivery In Flawless Condition Etc Of Mandatory Spares For Cpu System And Water Treatment Packages For The Total Scope Defined As Per Bhel Nit & Tender Technical Specification ,Amendement & Agreement Till Placement Of Order At 3X660 Mw North Karanpura Super Thermal Power Project,Tandwa, Jharkahnd (Total Price To Be Quoted For All Items Mentioned In Annexre-P Of Nit) (In Inr In Figures) Excise Duty Vat Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Lump Sump Firm Price Inclusive Of All Prvailing Taxes ,Duties And Other Levies But Excluding Gst For Manufacturing ,Inspection,Testing,Painting,Packing,Transportation,Delivery In Flawless Condition Etc Of Mandatory Spares For Cpu System And Water Treatment Packages For The Total Scope Defined As Per Bhel Nit & Tender Technical Specification ,Amendement & Agreement Till Placement Of Order At 3X660 Mw North Karanpura Super Thermal Power Project,Tandwa, Jharkahnd (Total Price To Be Quoted For All Items Mentioned In Annexre-P Of Nit) (In Inr In Figures) Total Amount Total Lump Sump Firm Price Inclusive Of All Prvailing Taxes ,Duties And Other Levies But Excluding Gst For Manufacturing ,Inspection,Testing,Painting,Packing,Transportation,Delivery In Flawless Condition Etc Of Mandatory Spares For Cpu System And Water Treatment Packages For The Total Scope Defined As Per Bhel Nit & Tender Technical Specification ,Amendement & Agreement Till Placement Of Order At 3X660 Mw North Karanpura Super Thermal Power Project,Tandwa, Jharkahnd (Total Price To Be Quoted For All Items Mentioned In Annexre-P Of Nit) (In Inr In Words) , Total Lump Sump Firm Price Inclusive Of All Prvailing Taxes ,Duties And Other Levies But Excluding Gst For Manufacturing ,Inspection,Testing,Painting,Packing,Transportation,Delivery In Flawless Condition Etc Of Mandatory Spares For Cpu System And Water Treatment Packages For The Total Scope Defined As Per Bhel Nit & Tender Technical Specification ,Amendement & Agreement Till Placement Of Order At 3X660 Mw North Karanpura Super Thermal Power Project,Tandwa, Jharkahnd (Total Price To Be Quoted For All Items Mentioned In Annexre-P Of Nit) Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 4
32.
Defence #11281747 Technical Bid
Tender For Provision Of Defi Md Accommodation At Kota Mil Stn; 1 Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 2 Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 3 Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 4 Lump sum price worked out by the contractor for ROAD, PATH, CULVERT AND HARD STANDINGas listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 5 Lump sum price worked out by the contractor for SEWAGE DISPOSALas listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 6 Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 7 Lump sum price worked out by the contractor for FENCINGas listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 8 Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLYas listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 9 Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 10 Lump sum price worked out by the contractor for LIGHTING PROTECTION as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 11 Lump sum price worked out by the contractor for FIRE FIGHTINGas listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 12 Lump sum price worked out by the contractor for LIFT WORKas listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 13 Lump sum price worked out by the contractor for HOT WATER SUPPLYas listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 14 Lump sum price worked out by the contractor for DG SETSas listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 15 Lump sum price worked out by the contractor for SITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORKas listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 16 Sch A Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes:(i) This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XVSITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORK schedule). 17 INTERNAL WATER SUPPLYS&F for 15mm dia sink mixer (wall mounted) with 150mm long swivel spout,connecting legs and wall flangerswith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2014511 / Hindware Cat Part No F690058 / Parryware Cat Part No G3335A1 or equivalent make as mentioned in Appx B. 18 S&F for 15mm dia single lever center hole basin mixerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F1015451 / Hindware Cat Part No F690012 / Parryware Cat Part No G4863A1 or equivalent make as mentioned in Appx B. 19 S&F for 15mm dia wall mixture with bend pipe for overhead showerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2002401 / Hindware Cat Part No F330020 / Parryware Cat Part No G3316A1 or equivalent make as mentioned in Appx B. 20 INTERNAL ELECTRIFICATIONS&F ofmodular type 3 pin 20 A socket with SP MCB, conforming to IS 1293: 2005as specified in IS 732: 2019 etc complete all as specified and directed 21 S&F for modular type 1 module RJ-11 telephone socket with shutter etc complete all as specified and directed 22 S&F for modular type 1 module co-axial type TV socket etc complete all as specified and directed 23 S & F for 16 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 24 S & F for 25 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 25 S & F for 32 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 26 S & F for 40 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 27 S&F forSingle Phase Dual Source Pre Paid Meter, Class 1.0, RS485,10/60A Direct,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 28 S&F forThree Phase Dual Source Pre Paid Meter, Class 1.0, RS485, 5A CT operated,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 29 S&F of Sheet metal enclosure distribution board VTPN4 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 30 S&F of Sheet metal enclosure distribution board VTPN6 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 31 S&F of 160A, 4 pole moulded case circuit breaker (MCCB) with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% = Icu = 16 kA as per IEC 60947-2 and suitable for 3-Phase, 415 V, 50 Hz electric supply etc complete all as specified and directed by engineer-in-charge. 32 S&F for 12W LED Downlight having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed . 33 S&F for LED light fitting with high 10 watt 220 V AC decorative wall type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed . 34 S&F for 10W LED bulk head light having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed. 35 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 600 mm sweep. Min air delivery 115 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) etc complete all as specified and directed by engineer-in-charge. 36 Supply and fix Wall Mounting Fan, steel body AC single Phase, 230V,With Sweep Size, 200mm ; Motor Speed 84CMM, 3 blades, and frame and louvers etc complete all as specified and directed by engineer-in-charge. 37 Supply, installation, testing and commissioning of factory made, indoor cubical compartmental type BUILDING PANEL (TTA) of suitable size for short circuit, temperature rise, protective earth short circuit test and dielectric tests of required ratings, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 42 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enameled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed by engineer-in-charge.The BUILDING PANEL shall comprise of the following:(A) Bus bar Chamber(i) 01 Set (3L + N) of copper busbar of rated capacity 400A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connections. 38 (B) Incoming:- (i)320A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 01 No.(ii) Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 No.(iii) LED phase indicators (Red, Yellow, Blue)- 01 Set 39 (C) Outgoing:-(i)40A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, havingtrip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 08 Nos(ii) LED phase indicators (Red, Yellow, Blue)- 08 Sets 40 SEWAGE DISPOSALS&F for DWCPE (SN8) 180mm outer dia and 163 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8)with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 41 S&F for DWCPE (SN8) 200mm outer dia and 175 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 42 S&F for DWCPE (SN8) 300mm outer dia and 260 inner dia of pipe for depth 1.65mm to 2.3m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 43 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-7 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 44 S&F forNonclog submersible (sewage disposal), pump set, electric driven 415 Volts 3 Phase 50 Hz, supply comprising of pump with cast iron impellors, submersible motor of suitable capacity, coupling, at discharge 3360 to 480 LPM and minimum discharge should be less than 480 LPM at minimum head 14 m.including chain pully block of two MT capacity 01 Noandsuitable arrangement for hanging the motor through chain of requirement of delivery of pump connected to main pipe line by suitabe HDPE pipe of size 150mm Dia for required length with necessary connection etc all as specified and as directed. 45 Supply,installing, testingand commissioningout door type LT feeder piller box of suitable size 750X750X450 mm, pedestal mounted, CPRI type test totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, framing with 50 x50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and paintedto both internal and External surfaces with powder coating paint in heatprocess of sheet and suitable for 415 volts, 50 Hz, 3 phase 4 wire system and comprising with and includingfollowing accessories and mounted on PCC Platform made out of100 mm thick PCC (1:3:6),0.45 Mtr all round the panel board etc complete with the following items :- 46 Incoming:- (i) Copper bus bar made up of copper strip100 amps duly mounted on bakelite insulatorssleevings of standard colour code - 01 Set. (04 No strips for Phases & Neutral)(ii) MCCB TPN 415 Volts,63 Amps, 50 Hz, breaking capacity 25 KA with fixed thermal & magnetic setting ( For Incomming ) - 01 No.Outgoing:-(i) MCB TP 415 volts 32 Amps, breaking capacity 16 KA with fixed thermal & magnetic setting ( For FPB2 ) - 03 Nos(2 nos for pump 1 nos for spare). (ii) FASD Starter for 15 HP Motor with single phase preventer, OLP and dry run protector- 02 Nos 47 (iii) Analogue type modular volt meterof range 0-500 volts -01 No(iv)Volt meter selector switch-01 No.(v) Analogue typeAmmeter of range 0-200 Amp-01 No(vi) Ammeter selector switch-01 No(set of three)(vii) Indicator lamp with integral circuit (230/240 volt) and cluster LED (Red, Orange, Blue) - 01 set(viii) CT 200/5 Amps - 3 Nos 48 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 49 S&F forPVC insulated and sheathed 1100 volts grade flat type submersible 06 sqmm cable three core multi stranded conductor etc complete all as specified and directed . 50 M&L for Making drill hole by trenchless technologyof suitable size under road for laying pipe line of size150mm bore at 1 metre depth from the road level etc complete all as specified and directed.Note :- Drill hole (trenchless) shall be done without disturbing top surfaces of road by appropriate machine. 51 M&L for steel gate 5.45 m wide and 2.70 m height with RCC pillar including excavation in any type of soil, plastering, painting, etc complete all as specified and shown in TD/2008/101 sheet No 1/3 to 3/3 52 EXTERNAL WATER SUPPLY Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 100mm bore class K-9 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 53 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-9 IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 54 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 55 Supply and fix CI foot valve with leather washer, ofsize 100 mm , lift and swing, single door, IS 4038 marked one with each pump suction line complete all as specified and directed. 56 M&L for construction of valve chamber of brick masonry from the top of surface with MS covers 3.15 mm thick and 40x40x6 mm MS angle with hinges for locking arrangement including excavation and earth works PCC (1:3:6) type C2 for foundation PCC bed/coping in cement concrete (1:2:4) type B1, plastering in CM 1:3 painting with two coats of synthetic enamel paint over a coat of red oxide primerfor the size of chamber 1200 mm x 1200 mm x 1200 mm (internal dimention) complete all as specified and directed. 57 Supply, install,commissioning and testing of Horizontal split case cetrifugal pump set 1450 RPM having an output of minimum 1100 LPM at a head of 45 mtr coupled to 3 phase 415 volt squirel case induction motor of adequate capacity complete all as ditected by Engr-in-charge with and including following :-(a) Necessary cable for interconnection between starter panel & pump set with 1100 volt rated copperinsulated unarmoured cable of minium 10 sqmm 3 core cable(b) Single phase preventer (current sensing type)(c) Necessary light grade GI pipe protection for cabling from pump set to LT panel.(d) Bourden pressure gauge.(e) MS pipe flanged type class B of size 100 mm bore upto foot valve from suction end of pump.(f) PCC foundation in type B-2, 1:2:4 using 20mm graded aggregate, 20cm above ground level and 30cm below grond level including grouting of eye bolts nut etc. for pump set of adequate size or as per manufacturers recommendations.Note: All other items/material requiredfor fixing pumpset shall be included in cost quoted.(ii) Foundation drawing shall be approved by GE/ Eng-In- Charge before fixing the pump set. 58 Supply, installations, testing and commissioning of factory made LT Indoor cubical typepanel boardhaving 150 Amp rated copper bus bar with neoprene rubber gasket and locking arrangement, dust,weather and verminproof , free standing, floor mounting type self ventilation with wire mesh,totally enclosed busbar chamber fully comparted type, front openable hinged independent door for each compartment with locking arrangement and common openable hinged door from rear side of suitable size made out of 2mm thick CRCA sheet duly painted with seven tank process,415 V,TPN,50Hz both side properly welded MS angular supported with chanel frame of size 50mm,at all vertical corner grouted in PCC 1:3:6 (Type-C1 using 20mm graded stone aggregate) and connecting the incomming/outgoing feeder by providing brass cable glands and Lugs complete all as specified and directed comprising of followings accessories:- 59 Incoming:- (i) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with adjustable thermal Setting-01 No.Outgoing:-(i)MCCB 3 Pole 63 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with adjustable thermal Setting - 02 Nos (ii) Single phase preventor -02 Nos(iii) On load Change over switch 4 pole of current raring 63 A (open execution type) - 01 No(iv)MCB SPN 10 Amp C curve, 10 KA capacity - 01 No(v) fully automatic Star-delta starter 15 HP or recommended by manufacturer of motor -02 Nos(vi) LED Indicator lamp (R,Y,B)- Set of Three.(vii) Multifunctional meterDigital type showing V,A,F,Pf,KW,KWH inbuilt selector switch with CT coiles for three phase -0 1No. 60 M&L for construction of header of ERW pipe having size dia 300 mm and length 2.5 m with two inlet connection of size 100 mm & three otlet connection having size 150 mm complete monting on RCC base/plinth etc complete all as specified and as directed by Engr-in-charge. 61 EXTERNAL ELECTRIFICATIONBoring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying under ground pipe upto 100mm dia complete all as specified and directed.Note :- GI pipe shall be measured and paid separately. 62 Taking out existing HT XLPE U/G cables, 11000 V grade from trenches/ducts/ poles etc of size 120 Sq. mm 3 Core etccomplete all as specified and directed. 63 Dismantling and taking down existing transformer mounted on four pole structure and shifting to nearest suitable location including its fixing on newly constructed platform and making all connection, testing as per requirementetccomplete all as specified and directed. 64 Dismantling and taking down existing 4-pole structure etccomplete all as specified and directed. 65 Dismantling and taking down existing 03 Nos of LT Panels, refixing at specified locationincluding connecting etc complete all specified and directed. 66 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 240 Sq. mm 3.5 Core etc complete all as specified and directed. 67 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 185 Sq. mm 3.5 Core etc complete all as specified and directed. 68 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size upto 95 Sq. mm 3.5 Core etc complete all as specified and directed.Note For item No. 57 to 63 :- The old material obtained from site shall be deposite by contractor in MES store yard without any extra cost as directed by GE. 69 M&L for construction of plateform of size 3500 x 3500 x 1200mm with brick construction in cement mortar 1:4 PCC (M-10 nominal mix) in foundation, 100mm thick RCC M-25 grade slab, with 8mm MS TMT bars 120mm c/c on bothway, brick masonary steps on one side XPM Jali fixed on angle iron 40x 40x6 mm post upto height of 8 feet above ground level and openable gate with locking arrangment including making provision for entry and exit of HT/LT cables and steps made to access to the top of plateform including plastering to bricks masonary complete including painting with 2 coats of whitewash on plastered surface and painting steel surface with 2 coats of red oxide primeretc complete all as specified and directed. 70 Supply & fix HT 11 KV, outdoor type gang operated air-break switch suitable for horizontal or vertical mounting rotating type complee with drop out fuse having 12 insulators of rating upto 200 Amps etc complete all as specified and directed. 71 Supply and fixing lightning arrestor HT 11 KV, 10 KA station class etc complete all as specified and directed. 72 Supply & errect 2 pole structure on 11 mtr PCC pole consisting of pole with anti-climbing device, PCC foundation & cross arms (Bracings) etc for one incoming and one out going. etc complete all as specified and directed. 73 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station (CSS) ,315KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply .Package substation will have the following equipment :- 74 HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos 75 (vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 SetTRANSFORMER315 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 955W and Max Losses @ 100% Load 2750 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be conforming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 500 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)500 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB)(ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 76 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robust. 77 construction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 78 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station , (CSS) 400KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply.Package substation will have the following equipment :-HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the 79 RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos.(vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 Set 80 TRANSFORMER400 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 1150W and Max Losses @ 100% Load 3330 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be confirming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 630 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)630 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB) (ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 81 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robustconstruction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 82 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge(Panel 1 - Near mains transformer GTC Area):- 83 INCOMING :-(i) S&F ACB 4 Pole 630 amps ,415 Volt electrical drawout type of breaking capacity not less than50 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 750 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBsOUTGOING:-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of block )(ii) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(ivDigital volt meter 0-400 V with selector switch - 01 No.(v)LED Indicating Lamps R,Y,B - 01 Set of three 84 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2 - Near Chambal Vihar Main Tfr Panel):-INCOMING :-(a) S&F MCCB 4 Pole 500 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(b) Aluminium electrolite Busbar 600 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 85 OUTGOING:-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of blocks)(ii) S&F MCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Street light timer using Power contactor 32 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(iv)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(v)Digital volt meter 0-400 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 86 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1A - LT PANEL FOR 3 X BLOCKS GTC):-INCOMING :-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 87 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 04 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 88 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2A - LT PANEL FOR 2 X BLOCKS CHAMBAL VIHAR):-INCOMING :-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 89 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 03 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 90 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1B & 2B):-INCOMING :-(i) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range-01 No incoming.(ii) Aluminium Electrolite Busbar 300Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 91 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series. - 01 Nos (for PH Panel)(ii) MCCB 4 pole 40 Amp, 415 V, 16 KA, C-series- 02 Nos (sewage PH +spare).(iii) MCB TPN 25Amp, 230 V, 10 KA, C-series - 07 Nos (Lifts+fire fighting+Street lights)(iv)Street light timer using Power contactor 25 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(v) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(vi) Digital volt meter 0-500 V with selector switch - 01 No. (vii) On load Change over switch 4 pole of current raring 63-100 A (open execution type) - 01 No.(viii)LED Indicating Lamps R,Y,B - 01 Set of three 92 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel D - DOE Area):-INCOMING :-(i) S&F MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0)-01 No incoming.(ii) Aluminium Electrolite Busbar 150 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 93 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series - 02 Nos (for Bldg + Spare)(ii) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (Garages + Spare).(iii) MCB SPN 10 Amp, 230 V, 10 KA, C-series - 02 Nos (Security light + Spare)(iv) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(v) Digital volt meter 0-500 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 94 M&L for factory made busbar box 750 Amps rated Aluminium busbar, 3 phase, 4 wire, 415 Volt of size not less than 300mm x 200mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wal by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 95 M&L for factory made busbar box 600 Amps rated Aluminium busbar, 1 phase, 245 Volt, size not less than 200mm x 150mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wall by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 96 Supply and fixing poly carbonatejunction box , weather and vermin proof of size 250X250X160 including provn of 4 Nos aluminium strip 25x3.15 mm size bus bar single phase and neutral suitabely mounted on bus bar insulators ,including one No. MCB SP 6 Amps for light control,drilling of holes.Provn of suitable size of GI nuts, bolts, double washer and FI clamps ofsuitable sizefor taking connections and fixing on LT steel tubular poles complete with locking arrangementcomplete all as specified and directed. 97 Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5Sqmm 1100 Volt , draw through LT steel tubular polesfor connection to street light from junction boxetc complete all as specified & directed. 98 S&F for Cable route indicator, duly engraved with LT CABLE 1100 VOLT on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PCC 1:3:6 type C-1, block of suitable size etc complete all as specified & directed. 99 M&L for Precast PCC (1:2:4) type B-1 cable path indicators of size 300x100x500mm rounded top having engraved in capital letters HT Cable embedded in position in PCC(1:3:6) Type C-1, using necessary formwork and including provision of two coats of cement base paint on exposed concrete surface and writing HT Cable in black synthetic enamel paint etc complete all as specified & directed. 100 M&L fordecorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watts including LED lamp etc complete all as specified & directed. 101 M& L for shifting of 33 KV HT cable to a safe distance from proposed building, supply, laying, testing & commisioning of 33 KV cable in replacement with new as per estimate provided by State electricity deptetc etc complete all as specified & directed. 102 FIRE FIGHTINGS&F forAutomatic air release valve 50mm dia suitable for domestic water with 25mm gun metal stop valveetc complete all as specified & directed. 103 S&F forbranch pipe with nozzle of 20mm dia for hose reel conforming to IS 8090etc complete all as specified and directed. 104 S&F forfix Valve, stop, screwed, 25 mmdia pipeetc complete all as specified and directed. 105 S&F for6 kg capacity Multipurpose dry chemical powder (ABC) type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/charged .etc complete all as specified and directed. 106 S&F forCO2 type fire extinguisher of 3 Kgs capacity with steel cylinder with a discharge valve and confirming to IS : 15683.Extinguisher shall be painted with red enamel apint and fixed to wall with bracket etc complete all as specified and directed. 107 S&F for9 Ltr capacity Foam type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/chargedetc complete all as specified and directed. 108 S&F fortesting of Star-Delta starter Panel for fire fighting pump motor etc complete all as specified and directed. 109 Supply, installation, testing & commissioning ofFIRE SIGNAGES for indication/information of fire exit, alarm panel, fire extinguishers fire axe, hose reel, hydrents, lifts of size 300mmx100mm etc complete all as specified and directed. 110 DG SETSSupply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 180 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 111 (A) Engine (prime mover) : Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. 112 (C) Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate.(D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1No 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications.(F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - 113 (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running (iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- 114 AC voltmeter - 01NoVoltmeter selector switch OFF/RY/YB/BR - 01NoFrequency meter - 01NoAC voltmeter of suitable scale - 01NoAmmeter selector switch OFF/R/Y/B - 01NoCurrent transformers of suitable ratio - 01NoBattery charger consisting of - 01No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01NoMains supply voltage monitor - 01NoSet of DC control relays and timers - 01NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01No 115 01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 116 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 117 Supply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 125 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 118 (A) Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. (C)Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate. 119 (D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1Nos 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications. 120 (F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running(iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- AC voltmeter -01 NoVoltmeter selector switch OFF/RY/YB/BR - 01 No 121 Frequency meter - 01 NoAC voltmeter of suitable scale - 01 NoAmmeter selector switch OFF/R/Y/B - 01 NoCurrent transformers of suitable ratio - 01 NoBattery charger consisting of - 01 No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01 NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01 NoMains supply voltage monitor - 01 NoSet of DC control relays and timers - 01 NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01 No01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections. 122 KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 123 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 124 Supply, installations, testing of electric chimney of size 60cm havingsuction capacity of 1200 cum per hour with filterless technology sealed motor and insulationfor oil deposit and water vapour alongwith self autoclean feature after 30 cycles of operation and minimum 5 year warranty etc etc complete all as specified and directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
33.
Housing Urban and Rular Development #11280707 Price Bid
Tender for Construction Of Pds Shop (Type -I) Lalapet Head Of Lalapet Panchayat , Earth Work Excavation In All Classes Of Soils Except Hard Rock Requiring Blasting Depositing On Bank With Initial Lead Of 10M And Lift Of 2M Including All Labour Charges And Incidental Charges Such As Shoring, Strutting, Providing Coffer Dams, Bailing Out Of Water Etc., In Sdr Soil , Cement Concrete 1 : 4 : 8 Mix Using 40Mm Hbg Metal For Foundation Including Watering Wherever Necessary And Laid In Layers Of Not More Than 15Cm Thick., Compacting Etc., Complete Complying With Standard Specifications And As Directed. , Filling In Basement With Conveyed Earth In Layers Of Not More Than 15Cm. Thick Well Rammed, Watered And Consolidated Complying With Standard Specifications Etc., Complete. , Brick Work In Cm 1:5Mix Using Country Bricks Ground Molded Of Size 23 X 11 X 7Cm For The Following Including Curing Etc., Complete Complying With Standard Specifications. , Brick Work In Cm 1:5Mix Using Country Bricks Ground Molded Of Size 23 X 11 X 7Cm For The Following Including Curing Etc., Complete Complying With Standard Specifications. , Supplying And Fabricating And Placing In Position Ms Steel Or Ribbed For Steel For All Reinforced Cement Concrete Works As Per The Design Given Including Cost Of Steel And Binding Wire In All Floors Etc, Complete Complying With Standard Specification. , Supplying & Erecting Centering For Sides & Soffits Including Necessary Supports & Strutting Up To 3.29M Height For Plane Surfaces In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60Cm & 10 Gauge Stiffened, Welded With Steel Angle Of Size 25 X 25 X 3Mm For Boarding Laid Over Silver Oak Joists Country Wood) Of Size 10 X 6.5Cm Spaced @ About 90Cm C/C And Supported By Casuarinas Props Of 10 - 13Cm Dia. Spaced @ 75Cm C/C Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. Rate For 10M2.For The Following Items , Supplying & Erecting Centering For Sides & Soffits Including Necessary Supports & Strutting Up To 3.29M Height For Plane Surfaces In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60Cm & 10 Gauge Stiffened, Welded With Steel Angle Of Size 25 X 25 X 3Mm For Boarding Laid Over Silver Oak Joists Country Wood) Of Size 10 X 6.5Cm Spaced @ About 90Cm C/C And Supported By Casuarinas Props Of 10 - 13Cm Dia. Spaced @ 75Cm C/C Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. Rate For 10M2.For The Following Items , Cement Concrete 1:1.5:3 Using 20Mm Iss Hbg Metal For All Reinforced Cement Concrete Item Of Works Excluding Cost Of Rein Forcemeat And Fabricating Charges, Centering And Shuttering But Including Curing And Providing Fixtures Like Fan Clamps In The Reinforced Cement Concrete Floor Or Roof Slabs Wherever Necessary And Bearing Surfaces Of Walls , Sides And Bottom Of The Slabs, Beams Etc., Shall Be Finished Smooth With Cement Mortar 1:3, 12Mm Thick. And With Kraft Paper Without Claiming Extra As Directed By The Departmental Officers Complete Complying With Standard Specifications , Cement Concrete 1:1.5:3 Using 20Mm Iss Hbg Metal For All Reinforced Cement Concrete Item Of Works Excluding Cost Of Rein Forcemeat And Fabricating Charges, Centering And Shuttering But Including Curing And Providing Fixtures Like Fan Clamps In The Reinforced Cement Concrete Floor Or Roof Slabs Wherever Necessary And Bearing Surfaces Of Walls , Sides And Bottom Of The Slabs, Beams Etc., Shall Be Finished Smooth With Cement Mortar 1:3, 12Mm Thick. And With Kraft Paper Without Claiming Extra As Directed By The Departmental Officers Complete Complying With Standard Specifications , Finishing The Top Of The Roof With One Course Of Machine Pressed Tiles Of Size 20 Cm X 2 Cm Of Approved Quality Laid In Cement Mortar 1:3(One Cement And Three Sand) 12 Mm Thick Mixed With Water Proofing Compound Conforming To Iss By 2% Weight Of Cement Used And The Joint Pointed Neatly To Full Depth Of Tiles With The Same Water Proofing Compound Mixed With Cement Mortar, Red Oxide, Etc., Complete Complying With Standard Specification , Supply And Fixing Of Cuddapah Slab Including Cost And Supply Of Work Site Etc Complete. 50 Mm Thick , Supplying And Painting The Walls With Single Coat Of Jsw Wall Putty As Instructed By The Departmental Officers Including Preparation Of Surface Curing, Etc., Complete In All Floors Complying With Standard Specifications (The Wall Putty Shall Be Got Approved By The Executive Engineer Before Use Of Work) , Plastering With Cm 1:5,12Mm Thick. Over The Cement Concrete For Floor Finish Including Curing Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. , Granolithic Floor Finish 1:2:4 Mix Of 40Mm Thick Hbg Metal For Foundation Including Watering Wherever Necessary And Laid In Layers Of Not More Than 15Cm Thick., Compacting Etc., Complete Complying With Standard Specifications And As Directed. , Paving The Flooring With Special Type Of Flooring Tiles (Cement Based Hydraulically Pressed Anti Skid Tiles (20Mm Thick) In Cm 1:3, 20Mm Thick Complying With The Standard Specifications And As Directed By The Departmental Officers. , Dadooing Of Walls With Colour Printed Glazed Tiles Of Size 300X200x6 Mm Of Best Quality Including Cost And Conveyance Of All Materials To Site And All Labour Charges Etc Complete , Distempering Two Coats With Best Approved Oil Bound Distemper Including Cost Of Painting Priming Coat Over New Plastered Surface And Conveyance Of All Materials To Site And All Labor Charges , Exterior Emulsion Two Coats Over Priming Coat Including Cost And Conveyance Of All Materials And Labor Charges Etc Complete. , Painting Two Coats Over New Iron Works Such As Steel Doors, Windows, Ventilators, Window Bars, Balustrades Etc., With Best Approved Best Quality Of Synthetic Enamel Paint Of Approved Color Over The Existing Priming Coat Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. , Supplying And Fabrication Of The Following Rolling Shutters Including Cost And Conveyance And All Charges Etc Complete.(Manually Operated ) , Manufacturing Supplying And Fixing Of Steel Door With The Following Specification Ms Angels Of Size 40X40x6mm Are Used For The Outer Frames And M.S. Angles Of Size 35X35x6mm For The Shutter Frames Stiffeners With 32 X 6Mm M.S Flat Is Provided At Required Intervals In The Shutter Frame. 18-Gauge C.R. Sheet Laid As Panel In The Shutter And Welded Intact. M.S. Flat 18X5mm Is Welded Over The 32 X 6Mm M.S. Flat Sandwitching The C.R. Sheet In Between Additional Stiffeners With 18X5mm M.S. Flat Is Provided Diagonally At The Rear Side Of The Shutter, 3Nos. Of Hinges In Case Of Single Leaf And 6Nos. Of Hinges In Double Leaves Shutter To Be Provided 6Nos. Of Holdfasts 120 Mm In Length Made Of Angle Section Spliced At The Ends Are Welded To The Outer Frames Of The Door. Tower Bolts 2Nos. One At The Top And The Other At The Bottom Are Provided 1No. Aldrop Is Provided Incase Of Double Leaf Door At Lock Rail Section In The Door In Single Leaf Door, One More Aldrop Is Provided In The Inner Lock Rail Section Of The Door One Rotaing Locking Arrangements For The Inner Side Of The Door And Additional Provision For Locking Arrangements For Lock Is Provided On The Rear Side Of The Door At An Appropriate Place. Incase Of Double Leaf Door M.S.Flat 32 X 3Mm At 1.1Kg/M Is Provided On The One Shutter T Conceal The Gap Between The Two Shutters.At An Appropriate Place In The Door. A Tie Bar Is Provided At The Bottom Of The Frame To Prevent Twisting Of Frame During Transportation And Fixing. All Members Are Given A Coat Of Red Oxide Primer As Directed By The Departmental Officers. The Rate Includes Cost Of All Materials, Labour Charges, Transportation To Site Of Work, Loading, Un Loading And All Other Incidental Charges Etc., , Supplying And Fixing Pvc Sliding Door With Solid Pvc Door Shutters Using 19 Gauge 19Mm Ms Square Tubes For Styles And Outer Frames, 15Mm Ms Square Tubes For Top, Lock And Bottom Rails. The Steel Tubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets. Shutter Using 5Mm Thick Solid Pvc Sheets For Panelling Shall Rigidly Fixed In Position Including Necessary Furniture And Fittings. The Over All Size Of Styles Shall Be 50Mm X 30Mm. The Over All Size Of Top Rail, Lock Rail And Bottom Rail Shall Be 75Mm X 30Mm. The Over All Size Of Frames Shall Be 50Mm X 45Mm, With Suitable Rabate For Housing The Shutter Including Slidng Arrangements. , Fabricating, Supplying And Fixng In Position Of Steel Sheeted Windows ( Two Leaves) With The Following Specifications. Outer Frames Of Windows Made Of Z Section F7d Of Size 33 X 25 X 3Mm At 1.419 Kg/ M And Mullion J Section (F4b) Of Size 46X25x3mm At 2.28Kg/M And Shutter Section Of Made Of F7d Of 33X25x3mm At 1.419 Kg/M As Specified In Is 7452/1990. Each Openable Shutter Should Not Exceed A Width Of 600Mm To Enable Separate Operations And Easy Maintenance. The Panel Of The Shutters To Be Covered With 18 Gauge Cold Rolled Sheet Of Superior Quality And Welded Intact With Shutter Frames. Horizontal Stiffeners Using 18X5mm Ms Flat At 0.70Kg/M At 3 Nos. For Each Shutter And Additional Diagonal Stiffners Of The Same Ms Flats At All The Four Corners Of Each Shutters To The Suitable Length Welded To The Shutters, For Holding The Cr Sheets In Position Firmly.2 Numbers Of Sturdy Hinges And One Number Of Handle- Cum-Latch Of Special Type Made With 18X5mm Ms Flats Are Revetted To The Shutters At An Appropriate Height In Window. Suitable Opening Is Left For Its Easy Operation. A Stopper Square Rod For Handle Is Provided In The Mullion Section At Suitable Place To Catch The Window Handle. Each Window Shutter Having An Adustable Stay Made Out Of 18 X 5Mm At 0.70 Kg/ M Ms Flat Of Lenght 320Mm With Three Adjustable Position. A Matching Peg Is Provided In The Outer Frame Of The Window At Suitable Place. 4 Nos. Of Hold Fasts Of 120Mm Length Spliced At The Ends Are Welded To The Outer Frame Of The Window By Using Ms Flat Of 18X5mm At 0.70Kg/M, Welded To The Shutter At Two Place Equivalent From Each From Top And Bottom Of The Shutter. , Fabrication, Supply And Fixing In Position Of N Type Ventilators Using M.S. Angle Of Size 25 X 25 X5 Mm For Frame And M.S. Flat Of Size 20 X 3 Mm For Fixing The Weld Mesh And Using 25 X 22 X3 Mm T Section For Frame Glass. Special Type Of Hold Fast Welded To The Frame Of 45 Degree Inclined Towards Centre For Wall And Fxing The Weldmesh 25Mm Square Including Cost Of 3Mm Thick Pinheaded Glass Panes For All Panels And Fixing The Glass Panels With Necessary Clips & Putties With Required Bolts, Nuts And Washers And One Coat Of Red Oxide Primer Etc. Including Necessary Dismantling, Making Holes In Reinforced Cement Concrete Columns, Beams, Masonry Wherever Necessary With Power Drill To The Extend Required And Made Good To The Original Conditions After Fising As Directed By The Departmental Officers. , Supply And Fixing Of 15 A Aerial Fuse Unit (500A) Unsuitable 100 X 100 Teak Wood Board Concealed Box Using Clamps Sd-128 , Supply And Fixing Of 16 Amps Dpic Switch Of 500V Grade With Fuse And Neutral On Suitablet.W. Board With Painting Of Suitable Color With Pwd Earthling (Sd No.154) , Supply And Run Of 2 Of 6 Sq. Mm ( 84/0.30) Polythene Insulated And Pvc Unsheathed S.C. Alu Cable Of 1100 V On 7/20 Gi Bearer Wire For Service Connection Main - Sd.64 , Supply And Run Of 2 X1.5Sq. Mm(22/.3) Pvc Insulated Sc Unsheathed Cu. Conductor Of 1100Grade In 25Mm Dia Gi Pipe (GlassB)Suitably Bent At Both Ends With Necessary Angle Iron Upright And End Supports For Mains Sd 69 , Supplying And Fixing Of Cfl Including All Cost And Conveyance To Work Site Etc Complete , Supply And Fixing Of W.T. Bulk Head Fitting Complete With Guard Suitable For Lamp With 40 W Bulb With Pvc Unsheathed Leads From Terminal To The Fitting - Sd. 83 , Wiring With 2 X 2.5 Sq.Mm Pvc Unheated Sc Allocable Of 650V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With T.W. Switch Box In Flush With Wall, Covered With Nylon Sheet Of 3Mm Thick With Painting Of Suitable Color For Concealed Pvc Light Point / Fan Point Sd 18 , Wiring With 2 X 2.5 Sq.Mm Pvc Unheated Sc Allocable Of 650V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With 150 X 100 X 113Mm T.W. Switch Box In Flush With Wall, Covered With Nylon Sheet Of 3Mm Thick 5 Amps 3 Pin Non - Interlocking C.S. Plug Top With Painting Of Suitable Color For Open Pvc Plug Point.- Sd -36. , Supply And Fixing Of Ceiling Fan Including Cost And Conveyance Of All Materials And Labor Charges Etc Complete. Sd 106 , Wash Basin , Iwc For Toilet , Gst Amount For Providing Service To Government Contract Works For The Above Construction & Maintenance Works.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
35.
Petroleum and Natural Gas #11273660 Technical Bid
Tender for Procurement Of Domestic Natural Gas Meter For Cgd Project At Six Geographical Areas (Gas) , Supply Of Domestic Natural Gas Meters G1.6 Design, Detailed Engineering, Fabrication/ Manufacturing, Assembly, Inspection (As Defined In Bid Document) For Supply Of Domestic Natural Gas Meters Including Packaging, Insurance, Handling, Transportation, Loading / Unloading At Sites/ Designated Store, Documentation Etc. And Providing All Related Services Conforming To Respective Data Sheets Enclosed With Tender. The Above Requirements Are For Cgd Project Of Gail. Note: The Delivery Location Are Bhubaneswar, Cuttack, Ranchi And Jamshedpur Ga , Domestic Natural Gas Meters (Lhs) (Type G 1.6 : Flow Rate 2.5 M3/Hr (Actual)) For Domestic Consumers (All The Work As Defined Above & As Per Particular Job Specification And Data Sheets) [Excluding Scope Of Transportation Charges For This Item, Which Is To Be Quoted Separately At Item. No. A.1.A Below] , Inland Transportaion Upto Delivery Locations And Other Costs Incidental To Delivery Of Goods For Item Code A.1 (Domestic Natural Gas Meter). Note : 1) The Actual Delivery Location Will Be Mentioned At The Time Of The Dispatch Order/ Released Order/P.O. , Domestic Natural Gas Meters (Rhs) (Type G 1.6 : Flow Rate 2.5 M3/Hr (Actual)) For Domestic Consumers (All The Work As Defined Above & As Per Particular Job Specification And Data Sheets) [Excluding Scope Of Transportation Charges For This Item, Which Is To Be Quoted Separately At Item. No. A.2.A Below] , Inland Transportaion Upto Delivery Locations And Other Costs Incidental To Delivery Of Goods For Item Code A.2 (Domestic Natural Gas Meter). Note : 1) The Actual Delivery Location Will Be Mentioned At The Time Of The Dispatch Order/ Released Order/P.O.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Contract Date: Ref. Documents Contract Value : 1.05 Lakh
Cooperative No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Andhra Pradesh View Result →
41.
Chemicals and Fertilizers #11264669 AOC
Bids Are invited for Complete Gear Box Between Benfield Circulation Hp And Lp Pump Including Charges For Tpi Agency - Design Manufacturing Inspection Testing Supply Of Complete Gear Box Between Benfield Circulation Hp And Lp Pump Including Charges For Tpi Agency Other Technical Specifciation Is As Per Item Specification Document , Complete Set Of Bearings For Low Speed Shaft - Complete Set Of Bearings For Low Speed Shaft Other Technical Specifciation Is As Per Item Specification Document , Complete Set Of Bearings For High Speed Shaft - Complete Set Of Bearings For High Speed Shaft Other Technical Specifciation Is As Per Item Specification Document , Complete Matched Set Of Spare Gear Internals - Complete Matched Set Of Spare Gear Internals Inclusive Of Pinion Item No 5 Wheel Gear Item No 6 And Shaft Item No 7 Of Drawing No 51Vm121 Other Technical Specifciation Is As Per Item Specification Document , Complete Set Of Oil Seals Of Gearbox Unit - Complete Set Of Oil Seals Of Gearbox Unit Other Technical Specifciation Is As Per Item Specification Document , Charges For Service Engineer Normal 10 Hours Working - Charges For Service Engineer Normal 10 Hours Working Between 9 Am To 8 Pm With Lunch Break Of 1 Hour From 12 Noon To 1 Pm On All Week Days That Is From Monday To Friday Saturday Sunday And Holidays Charges Are Inclusive Of Lodging Boarding And Local Transportation , Charges For Service Engineer For Overtime Working Hours - Charges For Service Engineer For Overtime Working Hours That Is For Working Beyond Timing 9 Am To 8 Pm On All Week Days That Is From Monday To Friday Saturday Sunday And Holidays Total Quantity : 33
Contract Date: Ref. Documents Contract Value : 43.55 Lakh
Boards / Undertakings / PSU No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 3.95 Lakh
Boards / Undertakings / PSU No of Bidders 8
Maharashtra View Result →
45.
Chemicals and Fertilizers #11255117 AOC
Bids Are invited for GLASS PIPING 300155386 MANUFACTURING AND SUPPLY OF COMPLETE COUPLING FOR GLASS PIPING AS PER THE FOLLOWING SPECIFICATION : A) SPECIFICATION: 1) SIZE: DN 300 AS PER ISO 3587 OR EQUIVALANT STD, 2) SET OF 1 COUPLING COMPRISES OF 2 NO OF BACKING FLANGE , HAVING PCD = 405 MM , M10 x 12 NO OF HOLE , ONE PAIR OF BACKING INSERT(SPLIT TYPE) & 12 NOS OF FASTENER/SPRINGS 3) TYPE : X-STRONG TYPE END CONNECTION HAVING BOTH FLANGES ARE OF SPLIT TYPE. 4) MOC - FLANGE - SILUMIN AS PER A 356 , INSERTS- SILUMIN BACKED PTFE , FASTENER /SPRING : SS304 5) SERVICE: ACID (HNO3 &H2SO4 ) NOTES: 1) VENDOR SHALL SUBMIT THE MATERIAL .TEST CERTIFICATE FROM NABL OR GOVT APPROVED LAB FOR THE MECHANICAL AND THERMAL PROPERTIES. 2) VENDOR MAY VISIT & SUBMIT THE DRAWING TO RCF FOR APPROVAL 3) VENDOR SHALL SUBMIT ONE SAMPLE FOR CHECKING AND APPROVAL FROM RCF BEFORE THE START OF COMPLETE LOT OF MANUFACTURING. 4) DESIGN SHALL HAVE MINIUMUM MATERIAL TO HAVE LIGHTER SELF WEIGHT ON THE GLASS PIPING. As per Tender ST 2 300014228 MANUFACTURING AND SUPPLY OF COMPLETE COUPLING FOR GLASS PIPING AS PER THE FOLLOWING SPECIFICATION : A) SPECIFICATION: 1) SIZE: DN 200 AS PER ISO 3587 OR EQUIVALANT STD, 2) SET OF 1 COUPLING COMPRISES OF 2 NO OF BACKING FLANGE , HAVING PCD = 296 MM , M10 x 8 NO OF HOLE , ONE PAIR OF BACKING INSERT(SPLIT TYPE) & 08 NOS OF FASTENER/SPRINGS 3) TYPE : X-STRONG TYPE END CONNECTION HAVING BOTH FLANGES ARE OF SPLIT TYPE. B) MOC - FLANGE - SILUMIN AS PER A 356 , INSERTS- SILUMIN BACKED PTFE , FASTENER /SPRING : SS304 C) SERVICE: ACID (HNO3 &H2SO4 ) NOTES: 1) VENDOR SHALL SUBMIT THE MATERIAL .TEST CERTIFICATE FROM NABL OR GOVT APPROVED LAB FOR THE MECHANICAL AND THERMAL PROPERTIES. 2) VENDOR MAY VISIT & SUBMIT THE DRAWING TO RCF FOR APPROVAL 3) VENDOR SHALL SUBMIT ONE SAMPLE FOR CHECKING AND APPROVAL FROM RCF BEFORE THE START OF COM Total Quantity : 170
Contract Date: Ref. Documents Contract Value : 25.89 Lakh
Boards / Undertakings / PSU No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 19,800
Statutory Bodies & Commissions/Committees No of Bidders 6
Maharashtra View Result →
48.
Health and Family Welfare #11248604 Technical Bid
supply of stationery articles , as per listed in the annexure along with requisite specifications, for the central / college store of nbmc , alpin (t - pin){t shape, ss} , arch file{top pvc coated 70 mm spine and double mechanism } , adhesive tape (brown){3 inch, 60 mtr} , adhesive tape (brown){5 inch, 60 mtr} , adhesive tape (transparent){2 inch, 60 mtr} , adhesive tape (transparent){3 inch, 60 mtr} , adhesive tape (transparent){5 inch, 60 mtr} , attendance register{small/ for faculty} , board{14 ft x 7 ft, fiber board.to be fix/ installed at demanded dept./ ward without any other extra cost.} , binder clip{25 mm, box of 12 pcs} , binder clip{31 mm, box of 12 pcs} , binder clip{41 mm, box of 12 pcs} , binder clip{51 mm, box of 12 pcs} , binding register no.08{each no. should contain 10 leaf, total leaf 80,160 page. 75 gsm, hard board binding, page numbering, institute name & address should print on top of the register} , binding register no.12{each no. should contain 10 leaf, total leaf 80,160 page. 75 gsm, hard board binding, page numbering, institute name & address should print on top of the register} , binding register no.16{each no. should contain 10 leaf, total leaf 80,160 page. 75 gsm, hard board binding, page numbering, institute name & address should print on top of the register} , binding register no.20{each no. should contain 10 leaf, total leaf 80,160 page. 75 gsm, hard board binding, page numbering, institute name & address should print on top of the register} , binding register no.24{each no. should contain 10 leaf, total leaf 80,160 page. 75 gsm, hard board binding, page numbering, institute name & address should print on top of the register} , board pin / push pin{metal or any best quality} , calculator{12 digit, dual power. casio/ citizen} , carbon paper{box of 100 sheets kores sapphire, camlin impress. the manufacturing date must not be more than 6 months old at the time of supply.} , cello tape{transparent, 1 inch} , cello tape{transparent, 2 inch} , cello tape{transparent, 3 inch} , clip board (exam board){pvc, mechanical clip} , correction pen (whitener) {9 grm/ ml faber castle/ camel the manufacturing date must not be more than 3 months old at the time of supply.} , cloths duster{small size} , cover file(4 folder){10 x15 inch, four fold, strong pasting, best quality board paper. ( institute name & address should be printed on top)} , date rubber stamp{10 years} , envelope (institute name & address must be print on the envelope){11x5, brown pack of 50 pcs.} , envelope (institute name & address must be print on the envelope){11x5, white pack of 50 pcs.} , envelope (institute name & address must be print on the envelope){9x4, brown pack of 50 pcs.} , envelope (institute name & address must be print on the envelope){9x4, white pack of 50 pcs.} , envelope (institute name & address must be print on the envelope){20x15, clothline, for service book pack of 50 pcs.} , envelope (institute name & address must be print on the envelope){5x9, custom print, large window pack of 50 pcs.} , answer sheet (each set (8- page set) of answer sheet shall be comprised of 4 leafs, after being folded in the middle, with name of the college printed on the top of first page. # each page (must be above 70 gsm) shall measure 13.5x 8.6){best quality} , loose sheet (each set (4- page set) of answer sheet shall be comprised of 2 leafs, after being folded in the middle, with name of the college printed on the top of first page. # each page (must be above 70 gsm) shall measure 13.5x 8.6){best quality} , eraser {white, soft apsara/ faber castle/ doms} , paper flag/ sticky note{multi colour, packet of four colour} , flex{to be fix/ installed at demanded dept./ ward without any other extra cost. colour/multi colour/ black & white.} , flex board{flex on strong iron frame. to be fix/ installed at demanded dept./ ward without any other extra cost. colour/multi colour/ black & white.} , glue stick{22 - 30 gram, which will be available. pedilite / camlin the manufacturing date must not be more than 6 months old at the time of supply.} , gems clip/ u clip{plastic coated, pack/ box of 100 pcs.} , high lighter pen{assorted colour, luxor/faber castle/ camlin the manufacturing date must not be more than 6 months old at the time of supply.} , marker pen ( permanent marker) bullet tip fine tip{assorted colour. luxor/faber castle/ camlin the manufacturing date must not be more than 3 months old at the time of supply.} , marker pen (cd marker){assorted colour. luxor/faber castle/ camlin the manufacturing date must not be more than 3 months old at the time of supply.} , lock & key{best quality} , note sheet{best quality} , notice board{board with frame & hanging facility. soft cousin board. size : 3x5 ft to be fix/ installed at demanded dept. / ward without any other extra cost.} , pen{use & throw assorted colour linc/doms/agni the manufacturing date must not be more than 3 months old at the time of supply.} , pen{gel, executive, green mrp between rs. 27-30.linc/ renold/ uniball/luxor the manufacturing date must not be more than 3 months old at the time of supply.} , paper cutting knife{heavy duty s.s, bq} , paper cutting scissor{heavy duty paper cutting scissor soft grip, 6 blade} , perforator{best quality} , punching machine with hole{2 hole kangaroo/ kores} , punching machine with hole{1 hole kangaroo/ kores} , paper weight{glass, transparent, flat} , peon book{best quality} , plastic transparent file{best quality} , rubber stamp{polymer non sharp edge fine computerized print, matter visible on top} , rubber stamp{self ink removable cartridge fine computerized print, matter visible on top} , despatch register{500 pages} , stamp pad{big size (110x70mm) faber castle/ camelthe manufacturing date must not be more than 3 months old at the time of supply.} , stamp pad{extra large (5x7 inch) faber castle/ soni/ tiger/ kores the manufacturing date must not be more than 3 months old at the time of supply.} , stamp pad ink{assorted colour100 ml bottol faber castle/ camlin the manufacturing date must not be more than 3 months old at the time of supply.} , student attendance register{for individual department} , stock register {500 pages} , ruler/ scale 12{plastic camlin/ doms/ natraj} , ruler/ scale 12{wooden/ metallic best quality} , sealing wax{box of 10 sticks best quality} , sealing wax{box of 12 sticks best quality} , sealing wax{box of 16 sticks best quality} , sharpener for pencil{apsara/ faber castle/ doms} , stapler machine{no. 24/06 kangaroo} , stapler machine pin{no. 24/06 kangaroo} , stapler machine{no. 10 kangaroo} , stapler machine pin{no. 10 kangaroo} , stapler machine remover{best quality} , tag file (institute name & address must be print on top of the file){9x15 inch, two fold, best quality board paper. custom print} , table tray{table top plastic paper tray with paper holding clip. best quality} , table top glass{white, 8mm, edge & side polished. the size of the table should be measured and delivered to the concerned department/ward by the approved vendor.} , tag bundle {pack of 100 pcs} , thread ball{best quality} , wall clock{analog, 12x12 ajanta/ orpat/ samay} , waste paper bin/ basket{plastic, 15 ltr capacity, best quality non - ventilated} , waste paper bin/ basket{plastic, 15 ltr capacity, best quality ventilated} , white board (signage){pvc board board with frame & hanging facility. custom size print. to be fix/ installed at demanded dept. / ward without any other extra cost.} , xerox paper a3{75 gsm ,pack of 500 sheets jk copier/ 3m} , receive register{500 pages} , white board {writing board pvc board board with frame & hanging facility. 5x3 sq ft to be fix/ installed at demanded dept. / ward without any other extra cost.} , white board pen{assorted colour luxor/ faber castle/ camlin} , wooden pencil{extra dark 2b pencil apsara/ faber castle/ doms} , wooden duster{bq} , white board duster{best quality} , xerox paper a4{75 gsm pack of 500 sheets jk copier/ 3m} , cotton twine thread {best quality} , broom stick/ jharu{best quality} , phenyl/ floor cleaner {5 litre bottle} , mop stick for floor cleaning{best quality} , mosquito and fly killer spray{200 ml bottle hit/ mortein/ baygon} , mosquito coil{best quality} , air freshner/ room freshner{200-250 ml bottle odonil/ godrej/ pour home} , air freshner bathroom blocks{50 gms packet odonil/ godrej} , surface and glass cleaner{500 ml bottle colin/ mr. muscle} , battery (aa){best quality} , battery (aaa){best quality}
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
West Bengal View Result →
49.
Railways #11248362 AOC
Supply Of Emergency Brake Accelerator Eb3 S/L With Bracket For Disc Brake System Of Lhbemergency Brake Accelerator Eb3 S/L With Bracket For Disc Brake System Of Lhb,Emergency Brake Accelerator Eb3 S/L With Bracket For Disc Brake System Of Lhb Coache S Part No. : - M/S Knorr-Bremse Part No. I 89368 Or - Brake Pipe Accelerator Valve (With Bracket) For Disc Brake System Of Lhb Coaches. Part No.:- M/S Faiveley Part No.072001000 Or Descript Ion : - Brake Pipe Accelerator Valve (With Bracket) For Disc Brake System Of Lhb Coaches. Part No. -M/S Escorts Part No. 1J11201006402eba [ Warranty Period: 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] Capital Store Depot/Anvt, Delhi 162.00 Numbers Nr Consignee Dy.Cmmamv/Lko, Nr Uttar Pradesh 36.00 Numbers Dy.Chief Material Haryana 121.00 Numbers Manager/Judw, Nr Inspection Stage Inspection Not Required Details 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply Page 1 Of 9 Run Date/Time: 23/12/2025 15:22:40Stores/Northern Rly Tender Document Tender No 07250472 Closing Date/Time 23/03/2026 11:00 For All Items Completion : Within 9 Months 50 % In 03 Month From Po And Balance Qty To Commence In Subsequent 4 Months And Complete In 2 Months Thereafter. Payment Terms S.No Description Payment Terms 1 95% Payment Will Be Made Against Receipted Challan Certiï¬Ed By Gazatted Oï¬Ƒcers Of The Consignee An Inspection Certificate And Balance 5% Payment Will Be Made Against Receipt Note. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 Option Clause As Per Nr Itt Rev.1.21_April_2024 Para 7.2 With Amendments Is Applicable To This Tender. Standard Governing Conditions S.No Description 1 The Contract Shall Be Governed By Latest Version (Along With All Correction Slips) Of Irs Conditions Of Contract, And All Other Terms And Conditions Incorporated In The Tender Documents. In Case Of Any ConflIct Between The Irs Conditions And Tendered Terms And Conditions, Tendered Terms And Conditions Shall Prevail. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 I) Bulk Order Will Be Placed On The Normal Applicable To No No Allowed Manufacturer Or Its Authorized All Bidders (Optional) Agent. The Manufacturer ϬRm Must Have Satisfactorily Executed At Least One Single Purchase Order For A Minimum Of 20 Percent Of The Total Tender Quantity Or Multiple Orders Totaling To 20% Or More Of The Tender Quantity Of Zonal Railways/ Pus/ Core For The Items Having Same Description, But Of DiffErent Sizes/ Ratings/Capacities During 5 Previous ϬNancial Years And Current ϬNancial Year Up To Date Of Tender Closing. Purchase Oï¬Ƒcers Can Consider Such ϬRms For Bulk Order Duly Keeping In View The Overall Performance Of The Firm (Ii) All Other OffErs, Who Are Otherwise Not Eligible For Regular Bulk Order(S) Due To Their Not Meeting With The Eligibility Conditions Mentioned In Above And Provided Page 2 Of 9 Run Date/Time: 23/12/2025 15:22:40Stores/Northern Rly Tender Document Tender No 07250472 Closing Date/Time 23/03/2026 11:00 Mentioned In Above And Provided They Are Able To Demonstrate Their Capacity-Cum Capability To Manufacture The Tendered Item, Can Be Considered Only For Developmental Order Up To 20 Percent Of The Net Procurable Quantity. For This Purpose, They Should Submit Along With Their OffEr, Documented Past Performance Reports Of Same Or Similar Items Of Equivalent Rating Or Equivalent Performance Parameters, Details Of M&P,Testing Facilities, Qap (If Available), Technical Manpower Available With Them, Registration For Same/Similar Item(S) With Other Government Agencies Or Psus Etc. Or Any Other Details As May Be Warranted As Per The Technical Speciï¬Cation And Drawing. Such Tenderers Are To Note That Non Submission Of Such Documents Shall Be Taken As Their Not Having Any Such Past Performance And/Or Capacity, And Their Offer Shall Be Considered Further As Per Extant Rules And No Back Reference In This Regard Will Be Made To Them. (Iii) The Onus Of Submission Of Requisite Documents (Such As Copies Of Receipt Note/Ic For Stock Items, Or Receipt & Acceptance/Ic For Non- Stock Items, Or Capacity & Capability Credential, M&P Required For Manufacturing Tendered Item, T&P, Technical Manpower, In House Testing Facilities, Mse Credentials Etc.) Along With Their E-OffEr Regarding Bulk Order Or Developmental Order Lies With The Tenderers. In Case The Tenderers Do Not Submit The Requisite Documents As Detailed Above Along With Their EoffEr, Nr Reserves The Right To Decide The Tender On The Basis Of Their Past Supply Performance Records Of Nr, As Per Immis History Sheet Of Nr, For The Tendered Item, In Case Of Stock Items, For The Purchase Orders Placed By Nr During Preceding ϬVe Years From The Date Of Tender Closing. In Case Of Non-Stock Items, Nr Reserves The Right To Decide The Tender On The Basis Of Nr Vendor Performance Available In Immis For The Tendered Item For The Purchase Orders Placed By Nr During Preceding ϬVe Years From The Date Of Tender Closing. No Back Reference In This Regard Will Be Made With The Bidder. Page 3 Of 9 Run Date/Time: 23/12/2025 15:22:40Stores/Northern Rly Tender Document Tender No 07250472 Closing Date/Time 23/03/2026 11:00 2 V. Where There Are Not More Than Normal Applicable To No No Allowed Three Indian Suppliers Categorized As All Bidders (Optional) Approved Vendor For The Tendered Item, Developmental Vendors Without Any Conditional Approval Can Be Considered For Placement Of Bulk Order Without Any Quantity Restrictions. (Iv) Only Manufacture Or Their Authorized Dealers/ Distributors Need To Quote With Tender Speciï¬C Authorization From The Manufacturers Failing Which OffEr Will Be Summarily Rejected. (V ) In Case Tenderers Participate As An Authorized Agent, Then The Performance As Required Above Shall Be That Of The Principal, Authorizing The Agent. It May So Happen That The Agent Has Credentials Of Past Supply For A DiffErent Principal But This Will Not Be Considered As Performance For Placing Bulk Order In Case Of Change Of Principal. 5. Compliance Conditions Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 9 Run Date/Time: 23/12/2025 15:22:40Stores/Northern Rly Tender Document Tender No 07250472 Closing Date/Time 23/03/2026 11:00 1 In Cases Of Contracts/Pos For A Value Normal Applicable To No No Allowed In Excess Of Rs 10 Crores, The All Bidders (Optional) Contractor Shall Be Required To Provide A Certiï¬Cate From The Statutory Auditor Or Cost Auditor Of The Company (In The Case Of Companies) Or From A Practicing Cost Accountant Or Practicing Chartered Accountant (In Respect Of Suppliers Other Than Companies) Giving The Percentage Of Local Content. Such Certiï¬Cates Shall Be Required To Be Submitted By The Contractor Along With Their Each Online Bill In Ireps. The Supplier Must Include Po Number & Po Date, Name Of Item, Name Of ϬRm, Local Content Percentage, And Details Of The Location(S) At Which The Local Value Addition Is Made, In The Certificate. In Case The Contractor/Supplier Does Not Meet The Stipulated Local Content Requirement And The Category Of The Supplier Changes From Class-I To Class-Ii/Non-Local Or From Class-Ii To Non-Local, A Penalty In The Form Of Deduction Of 10% Of The Contract Value Shall Be Imposed. For Severable Contracts Or In Case Of Part Supply, A Penalty In The Form Of Deduction Of 10% Of The Value Shall Be Imposed Commensurate To That Lot Only. This Penalty Of 10% On The Contract Value Will Be Over And Above The Liquidated Damages & Other Deductions/Penalties If Any Applicable In The Contract. However, Contract Once Awarded Shall Not Be Terminated On This Account. 2 In Keeping With The Public Normal Applicable To Yes Yes Allowed Procurement (Preference To Make In All Bidders (Optional) India) Order, 2017 As Amended And In Terms Of Clause 2.4.5 Of Instructions To Tenderers For E- Tender, Nr Itt_Rev_1.21_April_2024 & Its Applicable Correction_Slips. Public Procurement Of This Item Is Restricted To Class-I & Class Ii Local Suppliers Only. At The Time Of Tender Bidding The Bidders Shall Be Required To Indicate Percentage Of Local Content. The Bidders Should Mandatorily Indicate Percentage Of Local Content In Their Offer In Ireps. Page 5 Of 9 Run Date/Time: 23/12/2025 15:22:40Stores/Northern Rly Tender Document Tender No 07250472 Closing Date/Time 23/03/2026 11:00 3 (I) In Terms Of Clause 4.0 Of The Normal Applicable To No No Allowed Instructions To Tenderers For All Bidders (Optional) E.Tenders, Nr Itt_Rev_1.21_April_2024 & Its Applicable Correction_Slips, Bidders Not Failing In The Exempt Category For Furnishing Emd, Are Required To Mandatorily Furnish The Requisite Emd Along With Their OffEr, Failing Which Their OffEr Will Be Summarily Rejected. (Ii) In Terms Of Clause 12.0 For E.Tenders, Itt_Rev_1.21_April_2024 & Its Applicable Correction_Slips Successful Bidders Unless Failing In The Exempt Category For Submission Of S.D. Are Mandatorily Required To Submit Security Deposit At 5% Of The Value Of Contact Value. 4 Bidders Are Required To Submit A Duly Normal Applicable To Yes Yes Allowed Signed Certiï¬Cate As Per Clause 2.4.3 All Bidders (Mandatory) Of Nr Itt_Rev_1.21_April_2024 & Its Applicable Correction_Slips For Compliance To The Conditions Regarding Restrictions On Procurement From Bidders From Countries Sharing Land Borders With India. The Format Of Certiï¬Cate Is Mentioned Below For Ready Reference Of Bidders. I Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India; (A) I Certify That I Am Not From Such A Country; Or (B) I Am From Such A Country And Have Been Registered With The Competent Authority I Hereby Certify That I Fulï¬L All The Requirements In This Regard And Eligible To Be Considered. Evidence Of Valid Registration By The Competent Authority Is Attached. Note1: Bidder Is Requested To Please Strike Out Clause(A) Or Clause(B) Whichever Is Not Applicable To Bidder While Submitting Above Duly Signed Certificate . Note2. Bidders , Who Are Not From Such A Country Which Shares Land Border With India, Should Select Yes In The Complied Column. However, In Case, The Bidder Is From A Country Sharing Land Border With India, Should Select No In The Complied Column. Page 6 Of 9 Run Date/Time: 23/12/2025 15:22:40Stores/Northern Rly Tender Document Tender No 07250472 Closing Date/Time 23/03/2026 11:00 5 The Tenderers In Their Bids Shall Normal Applicable To Yes Yes Allowed Indicate The Details Of Their All Bidders (Mandatory) Jurisdictional Assessing Oï¬Ƒcers (Designation, Address & Email Id). Also Tenderers Are Required To Furnish The Correct Hsn Code For The OffEred Item Along With Their Bid. 6 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being Offered. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Bank Account Details For The Purpose Normal Applicable To No No Not Allowed Of Payment Shall Be Taken As All Bidders Appearing In The Profile Of The Vendor In Ireps. In Case, There Is Any Change In The Bank Account Details, Vendors Are Advised To Update Their Bank Account Details In Their Ireps Profile. 2 (Details Of Bank Account Of Normal Applicable To No No Not Allowed Pfa/Sab/Nr For Submission Of S.D. Is All Bidders State Bank Of India, New Delhi, Account No. 30788224089,Name Of The Branch-New Delhi Main Branch ( 00691 ), Name Of The Account Holder: Northern Railway ( Hq ) ( Re C E I P T Account), Ifsc Code- Sbin0000691 Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Vendor Name/Identiï¬Cation Marks As Normal Applicable To No No Not Allowed Well As Month And Year Of All Bidders Manufacture Must Be Inscribed/Engraved/Screen- Printed/Embossed On Item Supplied To Northern Railway As Per The Relevant Drawing/Specification/Description. 2 Pre-Decided Split Ordering Conditions Normal Applicable To No No Not Allowed As Per Clause 7.3.2 Of Instructions To All Bidders Tenderes For E- Tenders, Rev.1.21 Of April 2024 & Its Applicable Correction_Slips Will Be Applicable To This Tender. 3 Warranty For 36 Months From The Normal Applicable To No No Not Allowed Date Of Placement In Service Or 48 All Bidders Months From The Date Of Delivery Whichever Is Earlier. Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 7 Of 9 Run Date/Time: 23/12/2025 15:22:40Stores/Northern Rly Tender Document Tender No 07250472 Closing Date/Time 23/03/2026 11:00 1 Instructions To Tenderers For Normal Applicable To No No Not Allowed Electronic Tenders Revision Nr All Bidders Itt_Rev_1.21_April_2024 & Its Applicable Correction_Slips Has Been Uploaded On Ireps Website [Ireps.Gov.In] And Can Be Accessed After Logging In Using The Allotted User Name, Password And Digital Signature Through The Link Northern Rly/Stores Documents Available In The Documents Section On The Ireps Home Page. Tenderers Are Advised To Go Through These Instructions Before Submission Of Their Offers. The Tender Will Be Governed By Instruction To Tenderers For Electronic Tenders Nr_Itt_Rev_1.21_April_2024 & Its Applicable Correction_Slips. 2 Special Attention Of The Normal Applicable To No No Not Allowed Bidders/Tenderers Is Drawn Towards All Bidders Para 16.0 Of Instructions To Tenderers For Electronic Tenders Nr Itt_Rev_1.21_April_2024 & Its Applicable Correction_Slips, Regarding Action In Case Of Default Of The Firm In Execution Of Contract. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Inspection By Tpi Agency Without Normal Applicable To No No Not Allowed Stage Inspection. All Bidders 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration 3 To The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are 6 Fully Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department 7 Of Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided 8 In The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time 9 After The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With 10 The Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender Page 8 Of 9 Run Date/Time: 23/12/2025 15:22:40Stores/Northern Rly Tender Document Tender No 07250472 Closing Date/Time 23/03/2026 11:00 S.No. Document Name Document Description No Document Attached 7. Responsiveness S.No. Description 1 Mode Of Despatch: By Road Transport On Freight Pre-Paid And Door Delivery Basis. For : Destination, OffErs For Delivery Of Consignment Of One Consignee At Premises Of Another 2 Consignee Shall Be Treated As Commercially Unresponsive And Such OffErs Shall Be Summarily Rejected. 3 Validity Of Offer: No Deviation From The Offer Validity Period Stipulated In The Tender Is Permitted. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/M ( Akash Singh ) , - Brake Pipe Accelerator Valve (With Bracket) For Disc Brake System Of Lhb Coaches. Part No.:- M/S Faiveley Part No.072001000 Or Descript Ion : - Brake Pipe Accelerator Valve (With Bracket) For Disc Brake System Of Lhb Coaches. Part No. -M/S Escorts Part No. 1J11201006402eba [ Warranty Period: 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] Capital Store Depot/Anvt, Delhi 162.00 Numbers
Contract Date: Jun 09, 2026 Contract Value : 87.68 Lakh
Government Departments No of Bidders 1
Uttar Pradesh View Result →
50.
Railways #11247848 AOC
Supply Of Universal Axle Journal Turning And Burnishing Lathe(Ajtb)Universal Axle Journal Turning And Burnishing Lathe(Ajtb),Universal Axle Journal Turning And Burnishing Lathe(Ajtb) With Technical Specification As Per Bid Document Part 2 Attached. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Comprehensive Amc After Warranty Period As Per As Per Clause 17 Of Section - V [ Warr Anty Period: 2 Years, Amc Period: 5 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Numbers 3 6590Ns02 Concomitant Non Stock --- Yes Tpi Agency Inr Accessories (Y) Cost Of Concomitant Accessories As Per Tender Document(Refer Para 4.2 Of Part Ii) ] Consignee Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Set Inspection Details Stage Inspection Not Required 4 6590Ns06 Optional Non Stock --- No Tpi Agency Inr Spares (Y) Cost Of Optional Accessories With Price Break-Up Of Individual Items As Specified In Clause 4.3 Of Section Iv. ] Consignee Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Set Inspection Details Stage Inspection Not Required 5 6590Ns07 Optional Non Stock --- No Tpi Agency Inr Spares (Y) Cost Of Spares For 2 Years Normal Operation And Maintenance With Price Break-Up Of Individual It Ems ] Consignee Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Set Inspection Details Stage Inspection Not Required 6 6590Ns08 Optional Non Stock --- No Tpi Agency Inr Spares (Y) Page 1 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 Cost Of Consumables As Per Clause 6 Of Section V With Price Break-Up Of Individual Items As Appl Icable ] Consignee Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Set Inspection Details Stage Inspection Not Required 7 6590Ser03 Essential Non Stock --- Yes Consignee Inr Services (Y) Cost Of Turnkey Charges, Viz. Foundation, Installation & Commissioning, Etc. ] At (Location) Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Numbers 8 6590Ser04 Essential Non Stock --- Yes Consignee Inr Services (Y) Cost Of Preventive Maintenance During 1St And 2Nd Years Of Warranty Period. ] At (Location) Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Numbers 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 4 Months Of Issue Of Contract, However, Delivery Completion : Within 6 Months Thereafter Period Shall Not Exceed No. Of Days As Mentioned In Delivery Schedule Chart Of Para 7 Of Section Iv Of Bid Document Part Ii. However, The Delivery Period Indicated Being Tentative, May Vary At The The Time Of Placement Of Order. Payment Terms S.No Description Payment Terms 1 1) 60% Payment: Upon Receipt Of The M&P, Duly Pre-Inspected By A Third -Party Inspection (Tpi) Agency, Receipted At The Site By The Consignee In Good Condition And Submission Of A Joint Receipt Note. 2) 20% Intermediate Payment: After Successful Installation And Commissioning And Submission Of A Joint Commissioning Note. 3) Final 20% Payment: After Commissioning Of The M&P At The Consignees End For A Minimum Period Of 30 Days, Upon Submission Of A 10% Warranty Bank Guarantee And A Proving Test Certificate Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 The Bidder Agrees To Supply The Tendered Stores At The Rates Quoted By Him In Accordance With The Latest Version Of Irs Conditions Of Contract (Attached As Irs Conditions Of Contract To This Tender Document For Ready Reference) And Southern Railway Tender Conditions (Attached As Sr Tender Conditions To This Tender Document For Ready Reference). 4. Eligibility Conditions Special Eligibility Criteria Page 2 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Supply To Be Strictly As Per Speciï¬Cations Normal Applicable To Yes Yes Not Allowed Documents. All Bidders 2 As Per Clause 0501 To 0504 Of Section-I Of Normal Applicable To Yes Yes Allowed Bid Document Part I All Bidders (Mandatory) 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Quoted Cost Of Basic Machine, Normal Applicable To No No Not Allowed Concomitant Accessories/Equipment, All Bidders Essential Spares, Optional Accessories,Essential Services, Amc Service, Training Etc. It Is Mandatory To Submit OffErs Against All These Items, Otherwise OffEr Will Not Be Considered For Inter-Se Ranking. 2 Have You Attached Documents To Prove Your Normal Applicable To No No Not Allowed Eligibility And Past Performance As Per All Bidders Tender Requirement? 3 Have You Attached Certiï¬Cation Of Local Normal Applicable To No No Not Allowed Content From Statutory Auditor/ Cost All Bidders Accountant? 4 Have You Quoted Warranty Oblications As Per Normal Applicable To No No Not Allowed Tender Requirement? All Bidders 5 Have You Quoted Delivery Period Correctly Normal Applicable To No No Not Allowed And Precisely? All Bidders 6 Have You Uploaded Annexure A As In Section Normal Applicable To No No Not Allowed Vi, Complete In All Respect? All Bidders 7 Have You Submitted All Supporting Normal Applicable To No No Not Allowed Documents Required? All Bidders 8 Have You Read The Security Deposit (Sd) Normal Applicable To No No Not Allowed Condition At Para 10 Of Part A Of Sr Tender All Bidders Conditions Attached With This Tender Document And Uploaded Relevant Document For Seeking Exemption From Submission Of Sd? If Not, Are You Ready To Pay Security Deposit? 9 Are You Coming Under Mse Status Given As Normal Applicable To No No Not Allowed Per Guidelines Issued By Railway Board For All Bidders Purchase Preference Vide Letter No. 2010-Rs [G] -363-1 Dt. 05.07.2012 Or Latest. If Yes,Have You Attached Valid Documents (Udyam Registration Certiï¬Cate) Towards Being Mse? 10 Have You Furnished The Statement Of Normal Applicable To No No Not Allowed Deviations?[Preferably Nil] All Bidders 11 Have You Quoted The Discount If Any In The Normal Applicable To No No Not Allowed Specified Column Only In Ireps? All Bidders 12 Have You Furnished Bank Account Details Normal Applicable To No No Not Allowed Such As Name Of The Bank And Address, All Bidders Account No., Micr, Ifsc Code And Type Of Account To Facilitate Eft Payment? 13 Please Check Our Website Before Submitting Normal Applicable To No No Not Allowed OffEr, Whether Any Corrigendum To The All Bidders Tender Has Been Issued Or Not. 14 Firm To Indicate Make-Model-Brand OffEred, Normal Applicable To No No Not Allowed If Any. All Bidders 15 Have You Kept Your Offer Valid For 120 Days? Normal Applicable To No No Not Allowed All Bidders Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 3 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 1 In Case Of Road Delivery, The Date Of Delivery Normal Applicable To Yes Yes Not Allowed At Destination [Consignees End] Shall Only All Bidders Be Treated As Delivery Date Irrespective Of F.O.R. / F.O.T. Condition Mentioned Elsewhere In The Contract / Tender. 2 Tenderers May Note That Their OffEred Normal Applicable To Yes Yes Not Allowed Delivery Schedule Should Clearly Indicate The All Bidders Starting Time, Quarterly Rate Of Supply And ϬNishing Time. For OffErs With Vague Delivery Schedule Like -02 To 12 Months- Or Like -06 To 10 Months-, Delivery Period Shall Be Given As Per The Requirement Best Suited To This Office Within The Quoted Range. 3 The Bidder Conï¬Rms That Rates And Other Normal Applicable To Yes Yes Not Allowed Financial Terms Quoted In Relevant Columns Of All Bidders ϬNancial Bid Will Only Be Ruling Terms For Acceptance, And Such Terms Quoted Anywhere Else Should Be Ignored. 4 Whenever Tender Is Ϭ‚Oated With Purchase Normal Applicable To Yes Yes Not Allowed Restriction From Sources Approved By All Bidders Nominated Authorities And There Exists A Suspected Cartel Situation By Approved Sources Or The Rates Available From Approved Source/Sources Are Adjudged Unreasonably High, Despite Fair EffOrts As Permissible, The Purchaser Reserves The Right To Place Orders On ϬRm(S) Outside The Approved Vendor List, Without Any Restrictions.(Please Refer Para 4.0 Of Part B Of Sr Tender Conditions Document Attached To This Tender Document For Further Details.) Page 4 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 5 Hsn Code 8458 Normal Applicable To Yes Yes Not Allowed [A] All The Bidders/Tenderers Should Ensure All Bidders That They Are Gst Compliant And Their Quoted Tax Structure/Rates Are As Per The Gst Law. Firms Must Indicate Its Gst Registration Number Along With Their Offer. [B] In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Igst /Utgst/Sgst Act, The Railway Shall Deduct The Applicable Gst From His/Their Bills Under Reverse Charge Mechanism (Rcm) And Deposit The Same To The Concerned Tax Authority. [C] The ϬRm Should Indicate The Tariff Code (Hsn Code) For Claiming Gst For The Tendered Item. [D] The OffEr Shall Be Evaluated Based On The Gst Rate As Quoted By Each Bidder And Same Will Be Used For Determining The Inter-Se Ranking. While Submitting OffEr, It Shall Be The Responsibility Of The Bidder To Ensure That They Quote Correct Gst Rate And Hsn Number. [E] It Shall Be The Responsibility Of The Bidders To Quote Correct Hsn Number And Corresponding Gst Rate. The Purchaser Shall Not Be Responsible For Any Misclassiï¬Cation Of Hsn Number Or Incorrect Gst Rate, If Quoted By The Bidder. [F] Wherever, The Successful Bidder Invoices The Goods At Gst Rate Or Hsn Number Which Is DiffErent From That Incorporated In The Purchase Order, Payment Shall Be Made As Per Gst Rate Which Is Lower Of The Gst Rate Incorporated In The Purchase Order Or Billed. [G] Vendor Is Informed That She/He Would Be Required To Adjust Her/His Basic Price To The Extent Required By Higher Tax Bill As Per Invoice To Match The All Inclusive Price As Mentioned In The Purchase Order. [H] Any Amendment To Gst Rate Or Hsn Number In The Contract Shall Be As Per The Contractual Conditions And Statutory Amendments In The Quoted Gst Rate And Hsn Number, Under Svc. 6 Please Refer Para 15.0 Of Part - B Of Sr Normal Applicable To Yes Yes Not Allowed Tender Conditions Attached With This All Bidders Tender Document For Details Regarding Benefits Of Mse As Per Public Procurement Policy. 7 For Public Procurement (Preference To Make Normal Applicable To Yes Yes Not Allowed In India) Policy, Please Refer Para 16.0 Of All Bidders Part- B Of Sr Tender Conditions Attached To This Tender Document. Page 5 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 8 Bidder Shall Accept The Following Declaration Normal Applicable To Yes Yes Allowed [Land Border Condition] By Quoting Yes All Bidders (Mandatory) Against Conf. Allowed Or Complied Column For Compliance Of Oï¬Ƒce Memorandum Of Department Of Expenditure, Ministry Of Finance Om No. F.No.6/18/2019-Ppd Dated 23.07.2020. If Such Certiï¬Cate Given By A Bidder Whose Bid Is Accepted Is Found To Be False, This Would Be A Ground For Immediate Termination And Further Legal Action In Accordance With Law. I/We Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India. I/We Certify That This Bidder Is Not From Such A Country Or , If From Such A Country, Has Been Registered With The Competent Authority. I/We Hereby Certify That This Bidder, Fulfills All Requirements In This Regard, And Is Eligible To Be Considered. (Where Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached.) 9 1) Bidders Are Instructed Not To Indulge In Normal Applicable To Yes Yes Not Allowed Any Anti-Competitive Practices. As Per The All Bidders Provisions Of Competition Act,2002, Railways Can Make A Reference To The Competition Commission Of India For Making An Enquiry In Case Of Suspected Anti-Competitive Behavior By The Bidders. 2) Collusive Bidding, Bid Rotation, Bid Suppression, Complementary Bidding, Market Allocation And Sub-Contracting Arrangements Fall Under The Purview Of Bid Rigging Which Would Cause Appreciable Adverse Effect On Competition. 3) Competition Commission Of India Can Impose Heavy Penalties Such As: Penalty Upto 10% Of The Average Turnover For The Last Three Preceding ϬNancial Years Upon Each Of Such Enterprises Which Are Parties To Bid- Rigging And Can Even Order The Parties To Cease And Desist. 10 A) For : Destination. By Road. Normal Applicable To Yes Yes Not Allowed Accordingly, The ϬRms Are Advised To Quote All Bidders On For Destination Basis By Road And Offers With Deviations Are Liable To Be Ignored. B) Door Delivery Shall Be Made To The Consignees Along With Delivery Challan Postal Address Of The Consignees Is: Senior Section Engineer, Wheel/N/Tyre/Pwp, Loco Works, Perambur. Southern Railway Gst No. 33Aaagm0289c1zq. Page 6 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 11 Failure Consequences: In Case The ϬRm Fails Normal Applicable To Yes Yes Not Allowed To Execute The Contract Within The Original All Bidders Delivery Period, The Purchaser Will Be Entitled To Impose Liquidated Damages For Extension Of Delivery Period. For Any Reason, If The Supplier Fails To Supply Goods And/Or Service As Per The Conditions Of Contract, As Amended From Time To Time, Purchaser Shall Have The Right To Levy Damages From The Supplier For Failing To Comply With The Contractual Conditions, Not By The Way Of Penalty, An Amount Equal To Security Deposit Of The Defaulted Order Amount. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 12 Tenderers To Acknowledge Having Read And Normal Applicable To Yes Yes Not Allowed Also Accept The Irs Conditions Of All Bidders Contract, Sr Tender Conditions, Special And Other Conditions Speciï¬Ed In This Tender Document/Attached To This Tender Document. 13 (I) Security Deposit Shall Be 5 % Of Total Normal Applicable To Yes Yes Not Allowed Value Of Contract And Shall Be Taken From All All Bidders Vendors For Contract Value Above Rs. 25 Lakh Subject To The Applicable Exemptions. For Details Please Refer 10.0 Part A Of Sr Tender Conditions Enclosed To This Tender Document. In Case Of Submission Of Security Deposit In The Form Of Bank Guarantee, Please Refer Annexure 5 Of Part-B Of Southern Railway Tender Conditions. (Ii) Security Deposit Will Be Released After Completion Of Warranty Period Of 24 Months And Proof Of Submission Of 10% Bg For Camc To Consignee. 14 (A) Free Delivery To Consignee. Supply Of Normal Applicable To Yes Yes Not Allowed Machine Shall Be Made As Per The Milestone All Bidders Chart Given In Sl .No.7 (Delivery Schedule Chart) Of Technical Specification Enclosed. (B) Bill Payment: After Successful Completion Of Purchase Order, ϬRm Has To Submit The Bill On-Line Through Ireps Portal Only For Payment. In This Regard, The Following Documents Have To Be Uploaded Based On The Crn (R-Note) Issued By Railway (A) Invoice, Gst Declaration( I.E. Self Declaration Regarding Aggregate Annual Turnover In A ϬNancial Year: Less (Or) More Than 50 Crores / Less(Or) More Than 100 Crores/Less (Or) More Than 500 Crores. If More Than 500 Crores, E-Invoice Is Required To Be Uploaded.), Rnote, Neft Mandatory. (B) Warranty/Guarantee Certiï¬Cate, Rites Certiï¬Cate, Test Report, Dealership Certiï¬Cate (Or) Proof Of Purchase From Authorized Dealer, Calibration Certificate, Commissioning Report Whichever Is Applicable. 15 Packing Instructions: Use Re-Usable Steel Normal Applicable To Yes Yes Not Allowed Cage (Or) Wooden Box (Or) Gunny Bags (Jute All Bidders Bags) (Or) Carton Box (Or) Polythene Bags>50 Micron Only And Use Railway Parcel Transportation. Please Refer Para 1400 Of Section I Of Bid Document Part I. Page 7 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 16 Preferably Manufacturers Should Participate. Normal Applicable To Yes Yes Not Allowed Participating Traders/Agents Must Attach All Bidders Authorization Letter Issued By The Oem Or Oem Authorized Stockiest Along With Their OffEr. Authorization Letter Should Preferably Be Tender Speciï¬C. In Case Of General Authorization Letter, It Must Clearly Indicate The Validity Period/Expiry Date. OffErs With General Authorization Letter Silent On Validity Period/Expiry Date Will Not Be Considered For Placement Of Order And That OffEr Is Liable To Be Ignored. (Please Refer Para 3.4 Of Part B Of Sr Tender Conditions). 17 Procurement Of The Item Is Restricted To Normal Applicable To Yes Yes Not Allowed Local Suppliers With Minimum Local Content All Bidders Of 20% (Class-I Or Class-Ii Local Supplier As Deï¬Ned In Railway Board Letter No.2020/Rs(G)/779/2/Pt.1 Dated 25.09.2020 With Latest Amendments, If Any) Only And The Vendors Who Do Not Qualify To Be Local Suppliers (I.E.), Non-Local Suppliers With Local Content Less Than 20%) Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Local Supplier For The Tendered Item Participates In The Tender, It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. OffEr Of The ϬRm Shall Be Summarily Rejected In Case Of Non-Compliance Of Above Declaration. For More Details, The Tenderer Shall Refer Para 16.0 Of Part B Of Sr Tender Conditions Attached To This Tender Document. 18 Inter - Se Position Of Offers Would Be Normal Applicable To Yes Yes Not Allowed Determined Based On The Sum Of Cost All Bidders Of The Equipment, The Cost Towards Comprehensive Annual Maintenance Contract For 5 Years (With Npv Factor) Following Free Comprehensive Warranty For 2 Years, Cost Of Concomitant Accessories, Cost Of Preventive Maintenance For 2 Years, Cost Of Turnkey Charges Viz., Foundation, Installation & Commissioning Etc. (Excluding Cost Of Optional Accessories, Spares For Two Years Of Normal Maintenance And Consumables.) 19 Earnest Money Deposit (Emd) : Normal Applicable To Yes Yes Allowed 1)Emd Shall Be Deposited By All Vendors For All Bidders (Optional) Tenders With Estimated Value Above Rs.25 Lakhs Subject To The Applicable Exemptions. For The Exemptions And Other Details Please Refer Para 2.0 Part A Of Southern Railway Tender Conditions. 2)In Case Of Submission Of Earnest Money Deposit In The Form Of Bank Guarantee, Please Refer Annexure- 6 Of Part - B Of Southern Railway Tender Conditions. 20 All The Tenderers Shall Have To Submit Clause- Normal Applicable To Yes Yes Allowed Wise Compliance Of Speciï¬Cation Mentioned All Bidders (Mandatory) In Bid Documents Part I & Part Ii And Drawings Enclosed Along With This Tender Or Product Catalogue For The Make And Model OffEred Should Be Submitted By The Tenderer, Spelling Out Deviations, If Any, To Ascertain Technical Suitability. An OffEr, Whose Technical Suitability Cannot Be Ascertained, May Be Liable To Be Ignored. Page 8 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 21 Firms Have To Quote Cost Of Basic Machine, Normal Applicable To Yes Yes Not Allowed Concomitant Accessories/Equipment, All Bidders Essential Spares, Optional Accessories, Essential Services, Amc Service, Training Etc. It Is Mandatory To Submit OffErs Against All These Items, Otherwise OffEr Will Not Be Considered For Inter-Se Ranking. However, Please Note That Cost Of Optional Accessories Shall Not Be Included In The Basic Price Of The Machine For Inter-Se Ranking. 22 Clause No.3500 May Be Treated As Deleted Normal Applicable To No No Not Allowed All Bidders 23 Please Enter The Percentage Of Local Content Normal Applicable To No Yes Allowed In The Material Being OffEred. Please Enter 0 All Bidders (Optional) For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Railway Is Not Bound To Accept The Lowest Or Normal Applicable To No No Not Allowed Any Tender Or To Assign Any Reason For Doing All Bidders So And Railway Reserves The Right To Accept/Cancel Any Tender In Respect Of The Whole Or Any Portion Of The Items Speciï¬Ed In The Schedule Annexed (Or Tender Schedule) And The Contractor Shall Be Required To Supply The Same At The Rate Quoted. 2 1. For Any Queries Against This Tender, Normal Applicable To No No Not Allowed Please Contact Dy.Cmm/Tr/Sr Mobile No. All Bidders 9003060774 And Mail Id [email protected] 2. Any Technical Clariï¬Cation Regarding Drawing/Speciï¬Cation Can Be Obtained From The Oï¬Ƒce Of The Pcme/Sr/Mas. Dy.Cme/Plg Mobile No. 9003060403 And Mail Id [email protected]. Drawing (S) / Speciï¬Cation (S) Can Also Be Obtained From The Above Oï¬Ƒce After Payment Requisite Cost. 3 Vendors May Please Note That Giving Normal Applicable To No No Not Allowed Intimation Regarding The Tender In Open All Bidders Tender Cases Or Giving Limited Tender Enquiry Does Not Guarantee The Suitability Of OffEr For Placement Of Purchase Order. Railway Reserves The Right To Place Purchase Order Subject To Fulfilment Of Technical/Commercial Eligibility Conditions/Tender Conditions. 4 All Other Terms & Conditions As Per Irs Normal Applicable To No No Not Allowed Condition And Gcc All Bidders Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 9 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 1 A) Inspection By Tpi (Third Party Inspection Normal Applicable To No No Not Allowed Agency). Firm To Indicate Complete All Bidders Works Address Where Inspection Will Be Conducted. The Tenderer Shall Refer Annexure 13 Of Sr Tender Conditions For Further Details Regarding Tpi Clause. Please Note That OffErs With Inspection/Visual Inspection By Tpi Against Test Certiï¬Cate/Guarantee Certiï¬Cate /Work Test Certiï¬Cate Is Liable To Be Ignored. For Further Details Regarding Tpi Clause, The Tenderer Shall Refer Annexure 13 Of Sr Tender Conditions Attached To This Tender Document. B) Bidder Shall Indicate Place Of Inspection For Pre-Dispatch Inspection Duly Enclosing The Documentary Evidence. Note:- Any Request For Change In Place Of Inspection Shall Only Be Entertained With Documentary Evidence. 2 No. Of Stages Of Inspection: 2; Description Of Normal Applicable To No No Not Allowed Stage-1 Inspection: Raw Material Inspection All Bidders As Per Tender Schedule (As 100% Of Po Qty.), Description Of Stage-2 Inspection: Manufacturing And Fabrication Inspection As Per Tender Schedule (As 100% Of Po Qty.). This Is Excluding Final Product Inspection At Firms Premises As Per Tender Schedule (As 100% Of Po Qty.) 3 Marking : Manufacturer To Mark His Name Normal Applicable To Yes Yes Not Allowed And Month & Year Of Manufacture As Per All Bidders Drawing, Wherever Indicated, Or At A Location Where It May Not Get Obliterated In Service On The Item Being Supplied By Them Against The Purchase Order. Supplies Received Without This Are Liable To Be Rejected By Consignee. 4 I/We Agree To Supply The Tendered Stores At Normal Applicable To Yes Yes Not Allowed The Rates Quoted By Me/Us In Accordance All Bidders With The Irs Conditions Of Contract, Sr Tender Conditions, Special And Other Conditions Speciï¬Ed In This Tender Document/ Attached With This Tender Document. 5 Machine Should Have Warranty Of 24 Months Normal Applicable To Yes Yes Not Allowed From Date Of Successful Commissioning. All Bidders 6 No Developmental Order Will Be Placed For Normal Applicable To Yes Yes Not Allowed The Tendered Item. All Bidders 7 Post Warranty Camc Will Be Concluded By Normal Applicable To Yes Yes Not Allowed End-User Consignee At Their End After All Bidders Warranty Period, If Required. 8 Sd Should Be In Favour Of Dy.Fa & Normal Applicable To Yes Yes Not Allowed Cao/W/Per. Format For B.G Can Be All Bidders Downloaded In The Sr Tender Conditions (Annexure -5). Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Insurance Charges Should Be Quoted In Other Normal Applicable To No No Not Allowed Charges Column Against The Particular Items. All Bidders No Separate Line Has Been Provided For Insurance Charges. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 10 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 1 Bidders Must Submit Their Technical Bids As Normal Applicable To Yes Yes Allowed Per Format Annexure A. Tenderers Are All Bidders (Mandatory) Required To Submit Complete Details Including Values, Write-Up, Drawings, Sketch, Brochure Etc. As Per Requirement Speciï¬Ed In Respective Clauses Mentioned Therein. In Case Of Incomplete / Sketchy Information, The Technical OffEr Being Incomplete Is Liable To Be Rejected. Tenderers Should Clearly Indicate Compliance. 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To The Content 3 Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The Offer 5 And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of Govt. 7 Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In The Contract 8 Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After The 9 Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The Competent 10 Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description 1 5582578.Pdf Sr Tender Conditions Part-1 2 5582590.Pdf Sr Tender Conditions Part-2 3 5582666.Pdf Irs Conditions Part I 4 5582673.Pdf Irs Conditions Part Ii 5 5584578.Pdf Annexure For Bid Document Part 2 6 5584567.Pdf Bid Document Part 1 (Ii) 7 5584571.Pdf Bid Document Part 2 (I) 8 5584572.Pdf Bid Document Part 2 (Ii) 9 5584575.Pdf Bid Document Part 2 (Iii) 10 5584561.Pdf Bid Document Part 1 (I) 7. Responsiveness S.No. Description 1 Validity Of Offer:-120 Days, No Deviation From The Offer Validity Period Stipulated In The Tender Is Permitted. I/We Have Carefully Gone Through The Irs Conditions Of Contract (Included And Uploaded Along With The Bid Document) Particularly Para 20 Pertaining To Code Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That No Other Concerns Or Aï¬Ƒliates (Such As Having Common Partner/Director/ Promoter/ Owner/Holding Company Decision Control Etc.) Have Participated In This Tender Which Can Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Sister Concerns Including Ours 2 Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Conditions. I/We, Aï¬Ƒrm That We Shall Abide By The Code Of Integrity In General, With Speciï¬C Reference To ConflIct Of Interest, Anti Competitive Practices And Obligation To Proactive Disclosures. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected, At Any Stage. Page 11 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly Tender Document Tender No 16255018 Closing Date/Time 24/12/2025 14:30 3 Clause No.3500 Mentioned In The Attached Documents With This Tender Stands Deleted. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/Traction ( A N Veeraraghavan ) , Cost Of Concomitant Accessories As Per Tender Document(Refer Para 4.2 Of Part Ii) ] , Cost Of Optional Accessories With Price Break-Up Of Individual Items As Specified In Clause 4.3 Of Section Iv. ] , Cost Of Spares For 2 Years Normal Operation And Maintenance With Price Break-Up Of Individual It Ems ] , Cost Of Consumables As Per Clause 6 Of Section V With Price Break-Up Of Individual Items As Appl Icable ] , Cost Of Turnkey Charges, Viz. Foundation, Installation & Commissioning, Etc. ] At (Location) Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Numbers 8 6590Ser04 Essential Non Stock --- Yes Consignee Inr Services (Y) Cost Of Preventive Maintenance During 1St And 2Nd Years Of Warranty Period. ] At (Location) Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Numbers 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 4 Months Of Issue Of Contract, However, Delivery Completion : Within 6 Months Thereafter Period Shall Not Exceed No. Of Days As Mentioned In Delivery Schedule Chart Of Para 7 Of Section Iv Of Bid Document Part Ii. However, The Delivery Period Indicated Being Tentative, May Vary At The The Time Of Placement Of Order. Payment Terms S.No Description Payment Terms 1 1) 60% Payment: Upon Receipt Of The M&P, Duly Pre-Inspected By A Third -Party Inspection (Tpi) Agency, Receipted At The Site By The Consignee In Good Condition And Submission Of A Joint Receipt Note. 2) 20% Intermediate Payment: After Successful Installation And Commissioning And Submission Of A Joint Commissioning Note. 3) Final 20% Payment: After Commissioning Of The M&P At The Consignees End For A Minimum Period Of 30 Days, Upon Submission Of A 10% Warranty Bank Guarantee And A Proving Test Certificate Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 The Bidder Agrees To Supply The Tendered Stores At The Rates Quoted By Him In Accordance With The Latest Version Of Irs Conditions Of Contract (Attached As Irs Conditions Of Contract To This Tender Document For Ready Reference) And Southern Railway Tender Conditions (Attached As Sr Tender Conditions To This Tender Document For Ready Reference). 4. Eligibility Conditions Special Eligibility Criteria Page 2 Of 12 Run Date/Time: 24/11/2025 14:14:04Stores/Southern Rly , Cost Of Preventive Maintenance During 1St And 2Nd Years Of Warranty Period. ] At (Location) Sse/Wheel/N/Tyre/Pwp, Sr Tamil Nadu 1.00 Numbers
Contract Date: Jun 09, 2026 Contract Value : 2.34 Crore
Government Departments No of Bidders 1
TenderDetail
Loading tenders