View Bid Results For Lump Crusher Tenders

We found 36 Bid Results related to lump crusher tenders. You can find Contractor details who won lump crusher tenders along with contract details in Bid awards announcements section.

Indian Tenders
1
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
20
13
3
Tender Publishing Platform
11
25
State / UT
6
18
6
6
2
2
2
Contract Value
16
5
10
5
Publish Date
0
0
0
0
0
Sector
8
17
8
3
2
2
2
1
1
Ownership
3
17
11
8
Within keyword
Active filters:
Showing 1–1 of 36 tenders matching your filters
1.
Public Administrative Department #10773573 Price Bid
Tender For Atal Knowledge Center Library Construction Work Rajera - Excavation of soil up to 1.5 m depth in foundation, trench, drain, compaction of the bottom, pouring water, grooming the sides, taking out the excavated soil, filling the empty spaces with soil again after filling the foundation and disposal of the remaining soil up to a distance of 50 meters.2 In hard, clayey, gravelly soil, 40 mm nominal size stone aggregate (crusher broken)/brick soil should be put in cement concrete foundation or floor in the ratio of 1 cement: 4 sand: 8 aggregate in cement-sand mixture and compaction, including leveling. If 40 mm crusher broken stone aggregate is used along with stone aggregate (crusher broken), the same quantity will be payable but there will be a 30% reduction in the rate of aggregate. 3 Foundation and plinth first class brickwork in cement-gravel 1:6 or 1:8 mortar, including side crack filling and grouting. Cement mortar 1:64 Pouring and supply of reinforced cement concrete of 1:2:4/1:1.5:3 mix, including burying, grouting and leveling of roof slabs, eaves, beams, lintels, etc., including scaffolding, but cost of steel and shuttering separately. Ratio 1:1.5:35 Foundation and plinth first class brickwork in cement-gravel 1:6 or 1:8 mortar, including side crack filling and grouting. Cement mortar 1:6 Additional amount for masonry work in superstructure up to a height of 4.5 meters from plinth level.6 Cutting, bending, fitting and fastening of iron for RCC work with supply. 7. Centering (shuttering) for RCC roofs, slabs, balconies, lintels, etc. up to 4.5 meters in height and removal as per specifications. Shuttering Steel8. Cement concrete bars (1 part cement, 3 parts gravel, 6 parts 12 mm measured aggregate) of 90 mm average thickness, including tamping and compaction. (i) The bars should be laid in such a way that a slope of 1:50 is achieved in the desired direction, with 6 mm diameter bars placed at 25 cm centers in both directions, with concrete in the center of the grid, as per specifications. (ii) In case of trenching less than the specified thickness, a deduction of 10 percent of the total cost will be made for every inch of thickness less than the prescribed thickness.9. S & F Glazed tiles on roof10. Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095-Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm center to center one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm center to center to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mmcentre to center shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long(PWD BSR -2022)11 Cement plaster on the wall by mixing cement-gravel in 1:6 ratio including scraping the joints and regular leveling for 14 days. 20mm12 Providing and applying white cement based putty overplasteredsurfaceto preparethesurfaceevenandsmooth complete(PWD-2022-Less - 10%)13 Applying one coat of cement primer of approved brand and manufacture on wall surface including all scaffolding: (PWD-2022-Less - 10%)14 Wall painting with plastic emulsion paint of required shade including all scaffolding.New work (Two or more coat includingbasecoatofwaterproofing cement paint) -PWD BSR-2022 Item no. 12.40.115 Supply and installation of stone door and window frames using 1:4 cement mortar. Analysis for a double-layered 125 x 75 mm door frame measuring 8 meters.16 Supply and installation of a factory-made solid core, single-pane 30 mm door with commercial ply on both sides, with beading bolts, two latches, and two handles, using three enamelled hinges. Analysis for a 1 x 2 square meter door.17 S & F Section window18 Supply and installation of 14 mesh, 24 gauge iron window mesh, using 20 x 3 mm beading and screwing. Analysis 1.2 For a window of 0.60 m x 0.72 m19 Iron work in grills/gates, including cutting, mounting, and fitting flat corners, T-pieces, and channels.20 S & F Aluminum door21 Applying enamel paint in three layers to give an even shade. Creating an even surface on new/old work.22 S & F Channel door23 Earthwork in filling, digging a quarry on the roadside, lifting 1.5 m of soil and transporting it to 50 m, breaking lumps, laying it in 25 cm layers, tamping, leveling, and cambering. Ordinary soil24 Carriage of earth-lead two km25 Cement concrete foundation using 40 mm nominal size stone aggregate (crusher) broken/brick aggregate cement sand mortar 1 cement : 6 sand : 12 aggregate ratio Mixing, pouring, and crushing, including compaction. (As per IS Code 7272 and 10067) If hand-broken gravel is used instead of 40 mm crusher-broken gravel, the same quantity will be payable, but the rate of gravel will be reduced by 30%.26 Supply of white glazed China clay tiles and plastering with cement slurry and white cement in the joints (price of plaster not included). Glazed tiles size 30 x 45 cm27 Furniture and others28 Computer, Scanner, Printer, Inverter, etc.29 Water cooler, R.O., Electric fittings + Water fittings, etc.30 Planning board & Contengency charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
2.
Public Administrative Department #10421077 Price Bid
Tender For Library Room Construction Work In Pipalheda Village - Excavation of soil upto 1.5 depth in foundation, trench, drain, tamping the bottom, pouring water, beautifying the sides, taking out the excavated soil, filling the empty spaces with soil again after filling the foundation and disposal of the remaining soil upto a distance of 50 meters.2 In cement concrete foundation or floor, put 40 mm nominal size stone aggregate (crusher broken)/brick soil in cement-sand mixture in the ratio of 1 cement : 4 sand : 8 aggregate and tamping, including tamping.3 Laying of stone in foundation and plinth in cement-gravel mixture, including closing the side gap and tamping etc. 4 Centering/Shuttering (Platform and Casting) for laying RCC roof, slab, balcony, lintel etc. upto 4.5 m height and removal etc. as per specifications.5 Supply and casting of reinforced cement concrete of cement concrete 1:2:4/1:1.5:3 mix, pressing, tamping and levelling of surface with 1:3 cement mortar etc. in roof slab, balcony, beam, lintel etc. including scaffolding but cost of steel and shuttering separately.6 Cutting, bending and fixing of iron for RCC work and fastening work including supply.7 Foundation and plinth first class brick masonry in cement-gravel 1:6 or 1:8 mortar including closing of side cracks and tamping.8 Cement Supply and casting of reinforced cement concrete of 1:2:4/1:1.5:3 mix, pressing, plastering and leveling of surface with 1:3 cement mortar etc. in roof slabs, balcony, beams, lintels etc. including scaffolding but cost of steel and shuttering separately.9 Iron work in grills/gates etc. including cutting, mounting and fixing of flat cones, T and channel etc.10 Supply and fixing of double pane window of 22 gauge plain sheet in 25X25X3 mm frame of angle iron along with 10 mm grill, 3 mm glass and fitting of argal sliding bolts, latches and catch strips etc.11 22 gauge plain GI Window made of sheet in which the entire door frame is of 25 X 25 X 3 mm iron cone, 10 mm grill with armel, 2 latches and 4 strips are to be supplied.12 steel door and window13 Fitting and supplying 14 mesh, 24 gauge iron mesh in iron window and fixing it with 20 X 3 mm beading and tightening it with screws. Analysis for 0.72 square meter for a window of size 1.2 X 0.60 meter14 Cement plaster on the wall by mixing cement-gravel in 1:6 ratio, scraping the joints and regular watering for 14 days. 15 celing palster16 In earth work, digging a pit on the side of the road and lifting the earth 1.5 m and taking it upto 50 m, breaking the lumps and laying it in 25 cm layers and pressing and leveling and making camber. with taraasanpot17 Supply of 15 cm high stones for dry trench under the floor and complete work of laying trench.18 Polished Kota stone flooring over 1:4 cement gravel mixture of 20 mm thickness, laying and grinding of skirting (minimum 3 times) and joining the joints by filling them with cement slurry etc.19 Laying of 40 mm concrete in cement concrete foundation or floor. Stone aggregate of nominal size (crusher broken) / brick aggregate, cement-sand mixture, mixing in the ratio of 1 cement: 5 sand: 10 soil and ramming, including tamping.20 ditemersing21 Applying enamel paint in 3 layers to give even shade. Making even surface on new work / old work.22 Contigencies 2%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
3.
Public Administrative Department #10414506 Price Bid
Tender For Construction Of Cc Road For Water Drainage From Bhagisthas House Towards Rajusinghs House Bamboo; 1 Soil work in filling, digging a pit on the side of the road and lifting the soil 1.5 m and taking it up to 50 m, breaking the lumps and laying them in 25 cm layers and pressing and leveling and making camber. 2 Transportation of soil for different distances including lifting, unloading and stacking of material. (The length of transportation will be calculated from the nearest route and not by road) 3 Laying cement concrete for the foundation of the road and running needle and surface vibrating machine and mixing broken ballast with 40 mm crusher, and preparing it in desired grade, camber and super elevation. 4 Mixing and pouring controlled concrete on the upper surface of cement concrete road and running needle and surface vibrating machine (vibrator) and preparing it in desired grade, camber and super elevation for a non-slippery surface! 5 Photos and Board
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
4.
Public Administrative Department #10364670 Price Bid
Tender For Garbage Collection Center Construction Work Basda Brahman Padla - For foundation, trench and drain etc. digging of soil upto 1.5 m depth, tamping the bottom, pouring water, grooming the sides, taking out the excavated soil, filling the foundation with soil again, empty spaces and disposal of the remaining soil upto a distance of 50 m.2 In cement concrete foundation or floor, put 40 mm nominal size stone aggregate (Crusher Broken)/ brick aggregate in cement-sand mixture in the ratio of 1 cement: 4 sand: 8 aggregate and tamping, including tamping. With stone aggregate (Crusher Broken)3 In foundation and plinth, stone layer-fill in cement-gravel mixture, closing the side cracks and tamping etc. Cement gravel 1:64 Masonry of superstructure to be completed in cement mortar 1:6. Masonry of foundation and plinth first class bricks in cement gravel 1:6 or 1:8 mortar including closing of side cracks and wetting.5 Masonry work of 112 mm and 75 mm width of first class bricks in foundation superstructure in cement gravel mortar 1:4 including wetting.6 Soil work in filling by digging a pit on the side of the road and lifting 1.5 meter of soil and taking it upto 50 meter, breaking lumps and laying in 25 cm layers and pressing and leveling and making camber.7 Cement plaster on the wall by mixing cement gravel in 1:6 ratio, scraping joints and regular wetting for 14 days. Supply and fixing of 22 gauge iron steel corrugated sheet 20 mm8 0.80 mm thickness with J or L hooks and 8 mm dia bolts and nuts bitumen wire (complete work) Cost of scissors and purlins is not included. Analysis Shade size 18.3 m x 0.9 m For 184 sqm, 0.54 nos. of sheet size 2.5x0.9 m (121.5 sqm) and 54 nos. of sheet size 2.8x0.9 m (136.08 sqm) = 257.58 sqm9 Cement concrete 1:2:4 mixture of 50 mm thickness, consisting of 1 cement, 2 gravel, 4 stone or bricks mixed with ballast of 12 m, including pouring, ramming, pressing and leveling etc.10 Iron work in grill/gate etc. including cutting, mounting and fixing of flat cones, T and corrugated (channel) etc.11 Supply of 15 cm high stones for dry trench under the floor and complete work of trenching12 Display Board and Photo Contingency
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
5.
Public Administrative Department #10362972 Price Bid
Tender For Construction Work Of Inter Block In Village Kharda - Earthwork in filling, digging a pit on the side of the road and lifting the soil 1.5 m and taking it upto 50 m, breaking the lumps and laying them in 25 cm layers and pressing and leveling and making camber. Ordinary soil2 Transportation of soil for different distances including lifting, unloading and staking of material. (Length of transportation will be calculated from the nearest route and not by road) 2 Km.3 Laying cement concrete for road foundation and running needle and surface vibrating machine and mixing broken ballast from 40 mm crusher, making it in desired grade, camber and super elevation. 1:4:84 Foundation and plinth first class brick masonry in cement-gravel 1:6 or 1:8 mortar, including closing the side cracks and tamping. Cement mortar 1:65 Mixing and pouring controlled concrete on the top surface of cement concrete road and operating needle and surface vibration machines (vibrators) and preparing it to desired grade, camber and super elevation for non-slippery surface! 1:1.5:36 CC Block7 Lumpsum
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
6.
Public Administrative Department #10362574 Price Bid
Tender For Public Meeting Hall Construction Work Near Mahadev Temple, Village Guda Devdan Medtiyan. - Excavation of soil up to 1.5 m depth in foundation, trench, drain, compaction of the bottom, pouring water, grooming the sides, taking out the excavated soil, filling the empty spaces with soil again after filling the foundation and disposal of the remaining soil up to a distance of 50 meters. In hard, clayey, gravelly soil,2 In cement concrete foundation or floor, 40 mm nominal size stone aggregate (crusher broken) / brick aggregate, cement-sand mixture, mixed in the ratio of 1 cement: 5 sand: 10 soil, and compaction, including leveling. 3. Laying of stone in the foundation and plinth in cement-gravel mortar, including filling of side cracks and leveling, etc. Cement-gravel 1:84. Masonry of first-class brickwork in cement-gravel 1:6 or 1:8 mortar, including filling of side cracks and leveling, etc. Cement-gravel 1:6SUPER STRUCTURE5. Pouring and supply of reinforced cement concrete of 1:1.5:3 mixture, including burying of roof slabs, eaves, beams, lintels, etc., burying, leveling, and leveling of the surface in 1:3 cement mortar, etc., including footings, but the cost of steel and shuttering is separate.6. Cutting, bending, setting, and fastening of iron for RCC work, including supply. 7 Cement plastering of a 1:6 cement-gravel mixture on a wall, including scraping the joints and regular watering for 14 days.8 Supply and supply of a 20/25 mm thick cement 1:6 plaster directly on the pavement or on the RCC roof, including watering.9 Cement concrete 1:2:4 mixture of 1 cement, 2 gravel, 4 stone or brick aggregates of 12 m in thickness, mixing with pouring, tamping, compacting, and watering, etc., of 50 mm thickness, including filling, tamping, compacting, and watering.10 Earthworks in filling, digging a pit on the roadside, lifting soil up to 1.5 m and transporting it up to 50 m, breaking lumps, laying them in 25 cm layers, tamping, leveling, and cambering.11 Transportation of soil for various distances, including loading, unloading, and staking of material. (Transportation length will be calculated from the nearest route and not by road)12 Iron work in grills/gates etc. including cutting, mounting and fixing of flat cornices, T and channel.13 Supply and installation of 24 gauge iron mesh in iron windows with 14 mesh and 20 x 3 mm beading and screwing.14 Supply and installation of 22 gauge plain GI sheet double-leaf doors in 25 x 25 x 3 mm angle iron frame in 40 x 40 x 3 mm angle iron frame along with fittings like horizontal sliding bolts, latches and locking strips etc.15 22 gauge plain GI sheet Supply of sheet made window in which the entire frame is made of 25 X 25 X 3 mm iron conical, 10 mm grill with Argal, 2 nos. latches and 4 nos.16 Fixing of steel doors and windows to the wall in which the lugs are to be fixed in cement concrete 1:3:6 (cost of windows and doors is not included).17 Coating of enamel paint in 3 layers to give even shade. Making even surface on new work/old work.18 Additional amount for masonry work in superstructure up to 4.5 meters height from plinth level. 19. Centering/Shuttering (Takhta and Moulding) for RCC ceilings, slabs, balconies, lintels, etc. up to 4.5 meters height and removal as per specifications.20. Supply and installation of Rajnagar II Quality Marble, cutting and laying of marble in 20 mm 1:4 mortar, joining of edges with white cement, grinding (minimum 3 times), including polishing.21. Distemper as per plaster22. Lumpsum for light fitting etc.23. Contigency and others if any
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
7.
Public Administrative Department #10362437 Price Bid
Tender For Construction Of Cc Block Khadanja With Chowk From Lichhamanram/Bhairaram Jats House Towards Panchayat Bhawan, Completion Of The Incomplete Mundsar - Earthwork involves digging a trench along the roadside, lifting soil up to 1.5 meters and transporting it up to 50 meters, breaking lumps, laying them in 25 cm layers, tamping, leveling, and cambering.2. Transportation of soil for various distances, including loading, unloading, and stacking of material. (Transport length will be calculated from the nearest route, not by road.)3. For cement concrete foundations or floors, use 40 mm nominal size stone aggregate (crusher broken) / brick aggregate in a cement-sand mixture, mixing in the ratio of 1 cement: 5 sand: 10 soil, and compacting, including compaction. 4. Construction of floor/road using interlocking cement concrete blocks (Grade M-30, manufactured from a fully computerized automatic stationary hydraulic vibropressed machine and batching plant of class A as per BS 6717:2001) including supply and installation of edge blocks. In case of non-application of edge blocks, a deduction of 0.08 cubic meter/running meter should be made at the rate of 1:1.5:3 cement concrete for 80 mm thickness.5. P & F curb stone6. Material testing and others
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
8.
Public Administrative Department #10362436 Price Bid
Tender For Cc Block Road Construction Work From Asphalt Road Towards Mataji Temple, Completion Of Incomplete Work, Mundsar - Earthwork involves digging a trench along the roadside, lifting soil up to 1.5 meters and transporting it up to 50 meters, breaking lumps, laying them in 25 cm layers, tamping, leveling, and cambering.2. Transportation of soil for various distances, including loading, unloading, and stacking of material. (Transport length will be calculated from the nearest route, not by road.)3. For cement concrete foundations or floors, use 40 mm nominal size stone aggregate (crusher broken) / brick aggregate in a cement-sand mixture, mixing in the ratio of 1 cement: 5 sand: 10 soil, and compacting, including compaction. 4. Construction of floor/road using interlocking cement concrete blocks (Grade M-30, manufactured from a fully computerized automatic stationary hydraulic vibropressed machine and batching plant of class A as per BS 6717:2001) including supply and installation of edge blocks. In case of non-application of edge blocks, a deduction of 0.08 cubic meter/running meter should be made at the rate of 1:1.5:3 cement concrete for 80 mm thickness.5. P & F curb stone6. Material testing and others
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
9.
Public Administrative Department #10362435 Price Bid
Tender For Cc Block Road Construction Work From Panchayat Bhawan Towards Mataji Temple, Mundsar To Complete The Incomplete Work - Earthwork involves digging a trench along the roadside, lifting soil up to 1.5 meters and transporting it up to 50 meters, breaking lumps, laying them in 25 cm layers, tamping, leveling, and cambering.2. Transportation of soil for various distances, including loading, unloading, and stacking of material. (Transport length will be calculated from the nearest route, not by road.)3. For cement concrete foundations or floors, use 40 mm nominal size stone aggregate (crusher broken) / brick aggregate in a cement-sand mixture, mixing in the ratio of 1 cement: 5 sand: 10 soil, and compacting, including compaction. 4. Construction of floor/road using interlocking cement concrete blocks (Grade M-30, manufactured from a fully computerized automatic stationary hydraulic vibropressed machine and batching plant of class A as per BS 6717:2001) including supply and installation of edge blocks. In case of non-application of edge blocks, a deduction of 0.08 cubic meter/running meter should be made at the rate of 1:1.5:3 cement concrete for 80 mm thickness.5. P & F curb stone6. Material testing and others
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
10.
Public Administrative Department #10362420 Price Bid
Tender For Atal Gyan Kendra Library Construction Work In Village Ramasar. - Excavation of soil up to 1.5 m depth in foundation, trench, drain, compaction of the bottom, pouring water, grooming the sides, taking out the excavated soil, filling the empty spaces with soil again after filling the foundation and disposal of the remaining soil up to a distance of 50 meters.2 In hard, clayey, gravelly soil, 40 mm nominal size stone aggregate (crusher broken)/brick soil should be put in cement concrete foundation or floor in the ratio of 1 cement: 4 sand: 8 aggregate in cement-sand mixture and compaction, including leveling. If 40 mm crusher broken stone aggregate is used along with stone aggregate (crusher broken), the same quantity will be payable but there will be a 30% reduction in the rate of aggregate. 3 Foundation and plinth first class brickwork in cement-gravel 1:6 or 1:8 mortar, including side crack filling and grouting. Cement mortar 1:64 Pouring and supply of reinforced cement concrete of 1:2:4/1:1.5:3 mix, including burying, grouting and leveling of roof slabs, eaves, beams, lintels, etc., including scaffolding, but cost of steel and shuttering separately. Ratio 1:1.5:35 Foundation and plinth first class brickwork in cement-gravel 1:6 or 1:8 mortar, including side crack filling and grouting. Cement mortar 1:6 Additional amount for masonry work in superstructure up to a height of 4.5 meters from plinth level.6 Cutting, bending, fitting and fastening of iron for RCC work with supply. 7. Centering (shuttering) for RCC roofs, slabs, balconies, lintels, etc. up to 4.5 meters in height and removal as per specifications. Shuttering Steel8. Cement concrete bars (1 part cement, 3 parts gravel, 6 parts 12 mm measured aggregate) of 90 mm average thickness, including tamping and compaction. (i) The bars should be laid in such a way that a slope of 1:50 is achieved in the desired direction, with 6 mm diameter bars placed at 25 cm centers in both directions, with concrete in the center of the grid, as per specifications. (ii) In case of trenching less than the specified thickness, a deduction of 10 percent of the total cost will be made for every inch of thickness less than the prescribed thickness.9. S & F Glazed tiles on roof10. Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm center to center one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm center to center to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm center to center shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long(PWD BSR -2022)11 Cement plaster on the wall by mixing cement-gravel in 1:6 ratio including scraping the joints and regular leveling for 14 days. 20 mm12 Providing and applying white cement basedputty overplasteredsurfaceto preparethesurfaceevenandsmoothcomplete(PWD-2022-Less - 10%)13 Applying one coat of cement primer of approved brand and manufacture on wall surface including all scaffolding: (PWD-2022-Less - 10%)14 Wall painting with plastic emulsion paint of required shade including all scaffolding.New work (Two or more coat includingbasecoatofwaterproofing cement paint) -PWD BSR-2022 Item no. 12.40.115 Supply and installation of stone door and window frames using 1:4 cement mortar. Analysis for a double-layered 125 x 75 mm door frame of 8 meters.16 Supply and installation of a factory-made solid core, single-pane 30 mm door with commercial ply on both sides, with beading bolts, two latches, and two handles, using three enamelled hinges. Analysis for a 1 x 2 square meter door.17 S & F Section window18 Supply and installation of 14 mesh, 24 gauge iron window mesh for an iron window, using 20 x 3 mm beading and screwing. Analysis 1.2 X For a 0.60 meter window, for 0.72 square meters19 Iron work in grills/gates, etc., including cutting, mounting, and fitting flat corners, T-pieces, and channels.20 S & F Aluminum door21 Applying enamel paint in three layers to give an even shade. Creating an even surface on new/old work.22 S & F Channel door23 Earthwork in filling, digging a quarry on the roadside, lifting 1.5 meters of soil and transporting it to 50 meters, breaking lumps, laying them in 25 cm layers, tamping, leveling, and cambering. Ordinary soil24 Carriage of earth-lead two kilometers25 Laying 40 mm nominal size stone aggregate (crusher broken)/bricks in cement concrete foundation Aggregate Cement Sand Masala 1 Cement : 6 Sand :12 aggregate ratio, mixing, pouring, and tamping, including compaction. (As per IS Code 7272 and 10067) If hand-broken gravel is used instead of 40 mm crusher-broken stone aggregate, the same quantity will be payable, but the rate of aggregate will be reduced by 30%.26 Supply of white glazed china clay tiles and plastering with cement slurry and white cement in the joints (price of plaster not included). Glazed tiles size 30 x 45 cm27 Furniture and others28 Computer, Scanner, Printer, Inverter, etc.29 Water cooler, R.O., Electric fittings + Water fittings, etc.30 Planning board & Contengency charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
11.
Public Administrative Department #10293017 Price Bid
Tender For Construction Of Rest House At Bhojusar, The Cremation Ground Of Brahmins; 1. Excavation of soil to a depth of 1.5 m for foundations, trenches, or drains, compacting the bottom, watering, tamping the sides, removing the excavated soil, filling the voids with soil after filling the foundation, and disposing of the remaining soil up to a distance of 50 m. In hard, clayey, or gravelly soils, 2. For cement concrete foundations or floors, use 40 mm nominal size stone aggregate (crusher broken)/brick clay in a cement-sand mixture in the ratio of 1: cement: 5: sand: 10: clay, and compacting, including compaction. 3. Foundation and plinth: First-grade brickwork in a cement-gravel mixture of 1:6 or 1:8, including filling and compacting the side cracks. (Cement mortar 1:6) 4. Supply and pouring of reinforced cement concrete of 1:2:4/1:1.5:3 mix, including scaffolding, tamping, and leveling of the surface with 1:3 cement mortar for roof slabs, balconies, beams, lintels, etc., but the cost of steel and shuttering is separate. DPC IN RCC & Lintal 5. Additional amount for masonry work in superstructure up to 4.5 meters height from plinth level. 6. Cutting, bending, fixing and fastening of iron for ACC work, including supply. 7. Centering-installation of shuttering for laying RCC roof slabs, beams, balconies, lintels, etc. up to 4.5 meters height and removal as per specifications. 8. Laying of premium quality stone slab roof, filling the joints at the top and bottom with cement mortar in a 1:4 ratio along with stone arches. 9. Filling of cement mortar in a 1:4 ratio in burnt brick pieces or small stone slabs, supplying the top and sides of the slab roof. 10. Supply of white glazed china clay tiles and applying cement slurry over the plaster and applying white cement in the joints (price of plaster not included). Glazed Tile 30 X 45 CM 11. Applying cement plaster to the wall using a cement-gravel mixture in a 1:6 ratio, scraping the joints and regularly watering for 14 days to a thickness of 20 mm. Thickness 12 Whitewashing in 3 months to give an even shade on new/old works 13 Whitewashing in 3 layers to give an even shade on new/old works, including rubbing, surfacing, etc., with complete scaffolding. 14 Earthworks in filling, digging a pit along the road, lifting 1.5 meters of earth and transporting it up to 50 meters, breaking lumps and laying it in 25 cm layers, tamping, leveling, and cambering. 15 Transportation of earth for various distances, including loading, unloading, and stacking of material (transport length will be calculated from the nearest route, not by road) 1 KM 16 Cement concrete foundation or floor with 40 mm thickness. Stone aggregate (crusher broken) / brick aggregate of nominal size, cement-sand mixture, mixing in the ratio of 1 cement: 6 sand: 12 soil, pouring and tamping, including leveling. 17 Polished Kota stone flooring of 20 mm thickness over 1:4 cement gravel mixture, applying and grinding of skirting (minimum 3 times) and joining the joints by filling them with cement solution etc. 18 Contigency Charges and others
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
12.
Public Administrative Department #10186796 Price Bid
Tender For Shri Jai Hari Guru Jagram Das Gaushala has four stores and single brick wall in shed bamboo - 1 Excavation of soil upto 1.5 m depth in foundation, trench, drain, tamping the bottom, pouring water, beautifying the sides, taking out the excavated soil, filling the empty spaces with soil again after filling the foundation and disposal of the remaining soil upto a distance of 50 meters.2 In cement concrete foundation or floor, put 40 mm nominal size stone aggregate (crusher broken)/brick soil in cement-sand mixture in the ratio of 1 cement : 4 sand : 8 aggregate and tamping, including tamping.3 Laying of stone in foundation and plinth in cement-gravel mixture, including closing the side gap and tamping etc. 4 Soil work in filling, digging a pit on the side of the road and lifting the soil 1.5 m and taking it upto 50 m, breaking the lumps and laying it in 25 cm layers and pressing and leveling and making camber.5 Transportation of soil for different distances including loading, unloading and stacking of material. (The length of transportation will be calculated from the nearest route and not by road)6 Cement concrete 1:2:4 mixture of 1 cement 2 gravel 4 stone or brick in 50 mm thickness mixed with 12 m ballast including pouring, tamping, pressing and tamping etc.7 Cement plaster on wall by mixing cement-gravel in 1:6 ratio including scraping the joints and regular tamping for 14 days.8 Whitewashing work in 3 layers to give even shade on new/old work. 9 Iron work in grills/gates etc. including cutting, mounting and fitting of flat cones, T and corrugated (channel) etc.10 Supply and fitting of steel corrugated sheets of 0.80 mm thickness (22 gauge) fitted with steel J or L hooks and 8 mm diameter bolts and nuts, bitumen washers (complete work). Cost of scissors and purlin is not included. Analysis For shed size 18.3 m x 9.1 m = 184 sq.m., 54 nos. of sheet size 2.5 X 0.9 m (121.5 sq.m.) and 54 nos. of sheet size 2.8 X 0.9 m (136.08 sq.m.) = 257.58 sq.m.5411 photo and borda
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
13.
Public Administrative Department #10175008 Price Bid
Tender For CC block construction work in ward number 8, Khalyawali Bud ki Dhani, Begas - Side cleaning, uprooting of roots, stems of plants, shrubs, trees and saplings with 15 cm long stems and removal of debris! 3 Earthwork filling, digging a pit on the side of the road, lifting the soil up to 1.5 m and taking it up to 50 m, breaking the lumps and laying them in 25 cm layers and pressing and leveling them.4 Supply of road construction material after cutting.5 Spreading gravel, pebbles, kerosene, rubble and coarse aggregate in 15 cm (without crushing) thickness even in less thickness on the desired camber and grade of the road and pressing with 8-10 tonne external roller, filling and filling all the lead including water charges and hire of tools, machines and machinery.6 Transport of murrum, building debris, lime, gravel, stone soil up to 40 mm nominal size for different distances including lifting and unloading, stacking (length of transportation will be calculated from the nearest road and not by road)7 Laying cement concrete for the road surface and running the surface vibrating machine and meeting the machine at 40 cm to the desired grade camber and Preparation in super elevation. If hand broken gravel is used in place of 40 mm crusher broken stone soil in 1:4:8 then the same quantity will be payable but the rate will be reduced by 30%.8 Mixing and pouring controlled concrete on the upper surface of cement concrete road and running needle vibration machine (vibrator) and preparation in desired grade camber and super elevation for non-slip surface (in 1:2:4)9 Laying of 25 mm thick bitumen expansion joint with shalitax board in 150 mm depth / Cutting of consrution joint / longitudinal joint 4 to 6 mm.wide using mechanical concrete cutter including cost of diamond bit cutting wheel and filling of bitumen sealing compound in groove including cost of sealing compound cutting of crove 50 mm depth10 For. Contagency 2%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Rajasthan View Result →
14.
Petroleum and Natural Gas #9129799 Technical Bid
Contract Of Services For Urea Lumps Segregration / Crushing By Manual / Mechanical Crusher At Hurl, Gorakhpur
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Uttar Pradesh View Result →
15.
Public Administrative Department #9127411 Technical Bid
Tender For Purchase of equipment for sports and physical fitness increased - Surfing Board:- Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly.The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 1. (The cement concrete and excavation work shall be paid separately).3 CROSS TRAINER -Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Widux1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.1. pipe minimum of 80N C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The footrests shall be made of size not less than 130mmX5mm thick. High tensile steel. and bolts shall be used for assembly.[3:32 pm, 25/02/2022] Prasoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in-charge to fullfill. (The cement concrete and excavation work shall be paid separately).4 THAI-CHISPINNER (2 WHEEL):-Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mm (Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shall be made from G.1. pipe minimum of 80NB C class welded with M.S. round base plate at least Ø250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assembly. The powder coating shall be done with pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 3. (The cement concrete and excavation work shall be paid separately).5 Seated Puller Providing and fixing of Seated Puller of size not less than 1900mm (Length) x 740mm (Width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. The main structure frame shall be made from G.1. pipe minimum of 80NB C class welded with MS. round base plate at least 250 mm & 10mm thick. The handle frame shall be minimum of 32NB C class GL. pipe. The seat frame minimum of 32NB C class G.1. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The cement concrete and excavation work shall be paid separately)6 LEG PRESS Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.l. pipe minimum of 80NB C class welded with M.S. round base plate at least Ø250 mm & 10mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to completel the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately).7 DOUBLE STANDING TWISTER Providing and fixing of Double Twister Standing of size not less than 1500mm (Length) x 600mm (Width) x 1300mm. (Height), to enhance flexibility of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame is minimum of 25NB shall be made from C class G.L. pipe. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 0300mm and 10mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 9. (The cement concrete and excavation work shall be paid separately)8 SIT UP BOARD DOUBLE Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from C class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately).9 CHEST PRESS Providing and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 250 mm & 10mm thick. The handle frame shall be made up from at least 32NB C class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S. Sheet of size not less than 330mm Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately).10 POMMEL HORSE Providing and fixing of Pommel Horse of size not less than 2150mm (Length) x 800mm (Width) x 800mm. (Height), to enhance the flexibility of lower limbs, waist and abdomen. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame be minimum of 32NB shall be made from C Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 8. (The cement concrete and excavation work shall be paid separately).11 CHEST CUM SHOULDER PRESSProviding and fixing of Chest Press Cum Seated Puller of size not less than 2000mm Length) x 710mm (Width) x 2200mm (Height), to enhance the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S. Sheet of size 330 mm Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts& bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 11. (The cement concrete and excavation work shall be paid separately).12 PUSH UP BARS - Providing and fixing of Push Up Bars of size not less than 1220mm (Length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body. The main structure frame shall be made from G.I. pipe minimum of 80NB C class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made from C Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfill the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately).13 FOR SEATER MRG Providing and fixing of For Seater MRG swingof size 4/5 Feet (Diameter), 3 Feet (Height) fabricated with a Center Pipe/ Frame of50NBshall be made from “C” Class G.I. pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, color (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).14 CIRCULAR SWING FOUR SEATERProviding and fixing ofCIRCULAR SWING FOUR SEATER of size 6.0 X 5.25 Pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 65 NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, color (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately).15 HORSE / DUCK / RABET SPRINGRIDER Providing and fixing ofHORSE SPRINGRIDER of size 3.0 X 2.5 Feet fabricated with a Center Pipe/ Frame of40NB shall be made from “C” Class G.I. material andFRP Material The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 40NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, color (of metal, seat and pedal), and fixing of equipment etc. (The16 FOUR SEATER SEE SAW Providing and fixing of FOUR SEATER SEE SAWof size 5.5 X 6.25 material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from “C” class G.I. pipe. The handle frame of 25NB shall be made from “C” class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50NB”C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately)17 In earth filling work, making a mine on the side of the road and lifting the soil 1.5 meter and carrying it upto 50 meters, breaking the lumps and laying it in 25 cm layers and pressing and leveling it and making a camber. 134 A18 In earthwork, digging a pit on the side of the road and lifting the soil 1.5 m and taking it upto 50 m, breaking the lumps and laying it in 25 cm layers and pressing and leveling and making camber. 134 A19 Laying cement concrete for road foundation and running needle and surface vibrating machine and mixing broken ballast with 40 mm crusher, preparing it in desired grade, camber and super elevation. 141 A20 Under edge block of 80 mm thickness, cement concrete made of 1:1.5:3 or stone block whose thickness will be 20 cm, height 40 cm and the top edge of the block will be rounded. In place of block, a block of same size made on the spot will also be acceptable. In case edge block is not laid on the spot, 0.08 cubic meter per running meter will be required. There should be a deduction in the rate of cement concrete. 146 B
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
16.
Public Administrative Department #9080143 Technical Bid
Tender For Interlock Block Cc Road Construction Work Sub Health Center Hapana Tal Gram Ramdevra Gram Panchayat Dhani Swamiyan; 1 Earthwork in filling, digging a pit on the side of the road and lifting the soil 1.5 m and taking it upto 50 m, breaking the lumps and laying them in 25 cm layers and pressing and leveling and making camber. 2 Transportation of soil for various distances including lifting, unloading and stacking of material. (The length of transportation will be calculated from the nearest route and not by road) 3 Laying cement concrete for road foundation and running needle and surface vibrating machine and mixing broken ballast from 40 mm crusher, and preparing it in desired grade, camber and super elevation. 4 Under edge block of 80 mm thickness, cement concrete made of 1:1.5:3 or stone block whose thickness will be 20 cm, height 40 cm and the top edge of the block will be rounded. In place of block, a block made on the spot of the same size will also be acceptable. In case edge block is not placed on the spot, 0.08 cubic meter of cement concrete should be deducted per running meter. 5 Mixing and pouring controlled concrete on the upper surface of cement concrete road and running needle and surface vibration machine (vibrator) and preparing it in desired grade, camber and super elevation for a non-slippery surface! 6 photo and Borda
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
17.
Agriculture #7918840 AOC
Tender For Construction Of Godown 1080 Mt - Construction Of Warehouse 1080 Mt - CIVIL WORK 2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 3 Excavation for foundation in earth, soils of all types, sand, gravel and soft-murrum, including removing the excavated material up to a distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means 4 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand-packing and compacting etc. complete. 5 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer in-charge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 6 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc.) 7 Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchionsetc. including bailing out water,Steel centring formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc.) 9 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centring, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). With fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 10 Providing andlaying Castin situ/Ready Mix cement concrete M-20 of trap/ granite /quartzite/gneiss metalforR.C.C. slabsand landings as perdetailed designsand drawingsincludingsteelcentering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surfaceorrougheningifspecialfinishistobe providedandcuringetc.complete,(Excluding reinforcementandstructuralsteel).withfullyautomatic microprocessorbasedPLCwithSCADAenabled reversibleDrum Typemixer/concreteBatchmixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). 11 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centring, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 12 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 13 Providing and fixing in position HCRM / CRS (CorrosionResistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 14 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. 15 Providing Second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in Superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. 16 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete 17 Providing External cement plaster 15 mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positionsincluding scaffolding and curingetc. Complete. 18 Providing and laying in situ Tremix Cement Concrete M-20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20 mm deep with necessary refilling with bitumen etc. complete. 19 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sq.m as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. 20 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. 21 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 22 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. 23 Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete 24 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and topsection 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self-locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc., complete. With colour anodising without box 25 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 26 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litres 27 PEB WORK 28 Supplying,Fabricating,erecting & fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe 490) conforming to IS :2062 -2006. Rate shall be include cost of cutting,welding,splice plates,& packing plates,transporting,straighting ,cleaning,fabricating,& erecting in position weled /bolted structrural steel work in columns,beams,trusses,purlins,platforms,ladder,momorails,staircass ,supports,strenghting of steel members,etc.at site to line & level,supply of approvedbolts/nuts/washers etc.complete as per drawing including painting as per G/4,G/5,G/6 before erection& all material & labour chargesetc.complete& including sand blasting & painted withone coats og enamel paint (Berger EPILUX SG-HHI 664002) of 35-50 micron each coat with air less spary gun over a coat of zinc chromate primer-35-35 micron etc. complete as shownin drawings as per specifications and as directed by Enginner- in-charge (The Rate quoted shall include cost of bolts, nuts,washers,welding & electrodes required fot complete work). 29 Supplying,Fabricating,erectingof Cold Formed Light GaugestructuralSteel members conforming to IS:801/IS: 811 hot dip galvanised to IS:4759-96 including cutting,welding or bolting,splice plates , transporting,straghtnening,cleaning,fabricating & erececting in position 30 Supplying & Fixing ofPPGI Sheets ot 0.5 mm thick as shown in drawingor as directed by engineer in charge.( Essar Make) 31 Supplying & Fixing of 0.5 mm thk PPGL roof accessories as per drawingor as directed by engineer in charge. 32 Supplying & fabricating & erecting in position PPGI Eaves Gutter of required size with stop ends, all fixing accessories, dtop ends,etc. all elevations levels & heights incluiding, alinging,leveling,providing& fixing nut bolts,washers etc.as directed by engineer in charge. 33 Providing & Fixing of the rain water down take pipes Of PPGI , the sectional area of rain water down take pipe provided shallbe generally at the rate of 1 Sq.cm/ 70 to 80 Sq. decimetre of roof area drained. No Spout shall be less than 80 mm in diameter. The spacing of spouts shallbe arranged to suit the position of opening in the wall including all materials & labours charges etc. as per drawing or as directed by engineer in charge. 34 Turbo Ventilator 24 : Providing and fixing wind operated turbo ventilator system of various sizes over the existing roof including cutting CGI sheet, proper fixing in position to true line and level with all fixtures and fastenings includign etc. complete. 35 ELECTRIFICATION 36 Supplying,erecting&terminatingXLPEarmouredcable3 core6sq.mm.copperconductorcontinuous5.48sq.mm. (12SWG)G.I.earthwirecompleteerectedwithglands& lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 37 Makingtrenchofsuitablewidthanddepthinhardmurum/ tar roadfor layingprovided LTcable upto andincluding 16 sq. mm complete as per specification no. CW-EXNCTR 38 Makingtrenchofsuitablewidthanddepthinsoftsoilfor layingprovidedLTcableuptoandincluding16sq.mm complete as per specification no. CW-EXN-CTR 39 Supplying & erecting mains PVC unarmoured cable 1100Volt 40 Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrialtwopinplugsocket10Aand3pinplugtop10A with top cover necessary connection etc complete with approved make. 41 ProvidingpointwiringforstreetlightwithPVCunarmoured cable1100VoltgradeISImark3core1.5sqmmstranded/ solid copper erected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidly grouted in the wall with the help of plated 42 Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. 43 Supplying and erecting LED street light fitting suitable for20 to25W,withPF>0.95classIP65andabovehousingof pressurediecastaluminiumalloyandheatsinkextruded aluminium complete as per specification No FG-ODF/FLS 44 SupplyinganderectingstreetlightWallbracketmadefrom 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB 45 Providing earthingwith galvanizediron earthplate size60 x 60x 0.6cmcompletewithallmaterials,testing&recording the results as per specification no. EA-EP 46 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP 47 Supplying, erecting & marking DPMCB 6A to 32A,C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB 48 Supplying,erecting&markingSPMCB6Ato 32A,B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB 49 SupplyinganderectingGIsheet1.6mm(16SWG)tobe usedforfabricationofboxespanelboardsetc.including cutting,bending,drilling,welding,rivetingetc.andpainting with one coat of red lead paint and 2 coats of enamel paint. 50 Supplying and erecting marine plywood 18/19 mm thick fixed towall or onprovided panel board withnecessary materials such as screws, wall fasteners, supports, nut bolts etc. 51 Supplyinganderectingtriplepoleandneutraldistribution board(TPNDB)surface/flushmountedsuitableforSPMCB of 12 ways on iron / GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB 52 Supplying&erectingG.I.pipe‘A’ class25mmdia.erected forenclosing XLPE armoured cable onwall/pole asper specification no. CB-CE 53 Supplying & erecting G.I. pipe ‘A’ class 40 mmdia. erected forenclosing XLPE armoured cable onwall/pole asper specification no. CB-CE 54 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosingcable below ground/road surface, to required depth complete. 55 Supplying&erecting18guageM.S.Boxpowdercoated (4x4) 3 way for mains connection. 56 Supplying & erecting Siemens type brass cable glands for 3 to4core6sq.mm./2to4core10sq.mm.forXLPE armoured cable as per specification No. CB-GL 57 Supplying shockproof type hand lamp with lamp holder, bulb/ lamp100Wguardedglass and30 mtr.3 corePVC flexible 58 Point wiring for independent plug in 20 mm ISI markedHMS PVCconduitwith1.5sq.mm(2+1E)FRLSHgrade copper wire, flush type switch, earthing and requiredaccessories as per specification No: WG-PW/SW 59 SupplyinganderectingStreetlightbracketmadefrom25 mm. dia ‗B‘ class G.I. Pipe, 0.6 min length along with pole capof300mmlengthand80mmdiadulyweldedwith provided leads as per specification no. FG-BKT/BPC 60 Supplying&erectingmainswith2x2.5Sq.mmstranded copper PVC insulated wire with 2 x 1.5Sq.mmcopper PVC wire in PVC casing - caping20 mm on wall / ceiling. 61 Supplying&erectingmainwith2x4.00Sq.mmstranded copper PVC insulated wire with 2 x 1.5Sq.mmcopper PVC wire in PVC casing - capingon wall / ceiling. 62 Supplying and erecting double pole switch surface type/ flush type240V,32Awithindicator lamp&fuseas per specification no. SW-SWR/BDP. 63 Supplying and erecting double pole metal clad switch withHC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP .. 64 Supplying&erecting3W,230VintegraltypeLEDLamp suitable for B-22/E-27 base. 65 Supplying and erecting T8 Fluorescent tube day light 1200mm 36 W 66 Supplying&erectingreadytouseRetrofitT8LED18/20 tubelightwithpolycarbonatebody,heatsink,integratedHF electronicdrivercomplete&compatibletoT8/T12LED luminaire by disconnecting starter & ballast if necessary. 67 Supplying and erecting regular/ standard model ceiling fan of 900/1050mm.sweepcompleteerectedinpositionasper specification no. FG-FN/CF 68 Supplying and fixing wiremesh (Jali) cover suitable for fitting / fanorforanypurpose,completewithnecessarymaterials. The jali cover shall be made from good quality G.I. wire mesh 69 Supplyinganderectingdingdong/electronicmusicaltype call bell with heavy duty coil suitable to operate on 230V A.C. supplyerectedonpolisheddoublewoodenblock/sunmica block of suitable size 70 SupplyinganderectingstreetlightWallbracketmadefrom 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB 71 Supplying & erecting CRCA sheet metal one wayenclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete. 72 Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board complete. 73 APPROACH BITUMIN ROAD 74 Trimming of grass, shurbs andweeds from the roadway shoulders/berms and disposing off the same to suitable locations etc. complete As Directed by Engineer In Charge 75 Excavationfor roadway inearth, soilofall sorts, sand,gravel or soft murum including dressing section to the required grade, camber and sideslopesandconveying theexcavated materialswithall lifts up to alead of 50m. and spreading for embankment or stacking as directed 76 Excavation for roadway in hard murum and boulder including dressing section to the cum required grade, camberand side slopes and conveying the excavated materials withall lifts up to alead of 50m. And spreading for embankment or stacking as directed. 77 Providingsolingusing80mmsizetrapmetal in15cm. layer including filling void with cum Crushed sand/grit, ramming, watering etc. complete. 78 Supplying trapstonemetal of required size by bringing the boulders/Rubbleat the road side breaking them to required gradation including conveying the boulders/ Rubble and stacking thebrokenmetal etc. complete. (Prior approval of samplestackofbrokenmetalbytheEx.Engineer isnecessary thedateofapprovalwill formpartof themeasurements)a) 80 mm Metal ,By breaking rubble obtained by blasting. (Hand broken). with prior approval of concerned Superitending Engineer. 79 Supplying trapstonemetal of required sizebybringing the boulders/Rubbleat the road side breaking them to required gradation including conveying the boulders/ Rubble and stacking the broken metal etc. complete. (Prior approval of sample stack of broken metal by the Ex .Engineer isnecessary thedate of approval will form part of theme asurements)a)40 mm Metal, By breaking rubble obtained by blasting. (Hand broken). with prior approval of concerned Superitending Enginee 80 Spreading80mmmetal for road work including sectiononget complete as directed by Engineer in charge 81 Spreading 40 mm metal for road work including sectiononget complete as directed by Engineer in charge . 82 Supplying hardmurum/ kankar at the road site, including conveying and stacking complete. 83 Spreadinghardmurum/ softmurrum/ gravel or kankar for side width complete 84 Compacting the subgrade/ gravel/ oversizemetal (200 mm loose) layers for all width withVibratory roll erhaving weight 8 to10MT. includingnecessary, labour, materials and artificial wateringcomplete 85 Compacting thehardmurumsidewidths including laying in layers on each sidewith vibratory roller including artificial watering etc. complete. MORTH 408 86 Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kilogram/Square Metre, spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desireddegree of compactionas per Technical Specification Clause 506 etc. complete. (VG-30 bulk bitumen ) 87 Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footedin bitumen boller onB.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) MORTH 503 88 Open Graded Premix Surfacing-Providing and Laying OGC20 mm thickness composed of 13.2 mm to5.6 mm aggregates premixed with bituminousbin dertransported to site with VTS, laid over a previously prepared surface, finished to the requiredgrade, level, alignment, and rolling toachieve the desired compaction but excluding prime/ tackand Seal coat. For Bitumen of specifiedgrade--USING drum mix type hotmix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface)(VG-30 bulk bitumenrates are considered to arriveat rates) MORTH 511 89 9MM SEAL COAT: Providing and laying of Type A9 mm premix seal coat with HMP of Sq mapropriate capacity crushed stone chiping 6.7mmsize and penetration bitumen of specified grade @ 1.2 kg/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, bystatic roller havingweight 8 to10MTetc. complete. (VG-30bulk bitumen rates are considered to arrive at rates) 90 Providing & fixing R. C. C. 1:2:4 guard stones as per type design including painting numbering fixing in std. Size C. C. 1:4:8 block complete 91 ROYALTY CHARGES 92 Sand 93 Murun 94 MATERIAL LAB TESTING 95 Sand- Site test, Gradation, fineness modulus, silt and clay content 96 Aggregate/Crush material a) Carrying out water absorption 97 b)Specific gravity 98 c) Inpact Gravitygravity 99 d) crushing vlaue 100 Cement- Cement- Stabdard Consistency fineness, Specific gravity, Setting Time Initial And Final compressive strenght 101 Cement Concrete- Compressive Strength set of 3 cubes per 1 test 102 Mix Design M20 103 TMT steel bars- Steel - Tensile strength,Yield stress, ultimate tensile stress,%elongation, weight per running meter, Bend/Rebend test.(Set of 3 Bars) upto 16 mm (set of 3 bar) 104 TMT steel bars- Steel - Tensile strength,Yield stress, ultimate tensile stress, % elongation, weight per running meter, Bend/Rebend test.(Set of 3 Bars) Above 16 mm (set of 3 bar) 105 Bricks: Crushing value Water aborption,Specific gravity 106 ESHS 107 ESHS (Environment Safty and Health ManagementLabour Facilities (Lump- Sum Amount )
Contract Date: Sep 09, 2025 Contract Value : ₹ 1.26 Crore
Government Departments No of Bidders 4
Maharashtra View Result →
Chhattisgarh View Result →
19.
Heavy Industries and Public Enterprises #7733965 AOC
Bids Are invited for 220V Smps Based Float-Cum-Boost Charger For Chp Mcc-1 Nr Crusher House As Per Technical Specification. Rating Shall Be 80A Or As Per Load Cycle Min Rating Of 220Ahwhichever Is Higher. - Bc1 , Ni-Cd Battery Health Monitoring System For Chp Mcc-01 Near Crusher House , One For Each Set Of Battery As Per Technical Specification - Bc2 , 220V Smps Based Float-Cum-Boost Charger For Chp Mcc-2 Nr Bunker Mcc As Per Specification.Rating Shall Be 40A Or As Per Load Cyclemin Rating Of 120Ah Whichever Is Higher. - Bc3 , Ni-Cd Battery Health Monitoring System For Chp Mcc-2 Nr Bunker Mccone For Each Set Of Battery As Per Technical Specification - Bc4 , 220V Smps Based Float-Cum-Boost Charger For Ahp Mcc-1 Nr Main Plant As Per Specification.Rating Shall Be 60A Or As Per Load Cyclemin Rating Of 150Ah Whichever Is Higher. - Bc5 , Ni-Cd Battery Health Monitoring System For Ahp Mcc-1 Nr Main Plant One For Each Set Of Battery As Per Technical Specification. - Bc6 , Battery Fuse Box For Chpmcc1 Area Minimum 50A As Per Boq In Technical Specification - Bc7 , Battery Fuse Box For Chpmcc2 Area Minimum 25A As Per Boq In Technical Specification - Bc8 , Battery Fuse Box For Ahpmcc1 Area Minimum 40A As Per Boq In Technical Specification - Bc9 , Discharge Resistor For Chp Mcc-1 Area With Shunt Suitable For 5 Hour Discharge Rate Suitable For 220Ah Nicad Battery - Bc10 , Discharge Resistor For Chp Mcc-2 Area With Shunt Suitable For 5 Hour Discharge Rate Suitable For 120Ah Nicad Battery - Bc11 , Discharge Resistor For Ahp Mcc-1 Area With Shunt Suitable For 5 Hour Discharge Rate Suitable For 150Ah Nicad Battery - Bc12 , Mandatory Spares For Float Cum Boost Charger As Per Annexure-Iii - Bc13 , Commissioning Spares For Float Cum Boost Charger As Per Annexure-Ii - Bc14 , Lump Sum Charges Per Visit For Engineer , Except Daily Charges - Bc15 , Lump Sum Daily Charges For Engineer - Bc16 Total Quantity : 65
Contract Date: Ref. Documents Contract Value : ₹ 58.59 Lakh
Government Departments No of Bidders 4
Tamil Nadu View Result →
20.
Heavy Industries and Public Enterprises #7673174 AOC
Bids Are Invited For Ni Cd Battery And Accessories For Ennore Project Battery For Ahp Mcc-01 Near Compressor House Ni-Cd Battery Mandatory Spares As Per Annexure-Iv , 220V Dc Ni-Cd Battery For Ahp Mcc-01 Near Compressor House Ni-Cd Battery Commissioning Spares As Per Annexure- V , Ni-Cd Battery Supervision Of E And C Lump Sum Charges Per Visit For Engineer Except Daily Charges , Ni-Cd Battery Supervision Of E And C Lump Sum Daily Charges For Engineer , Type Test For Chp Mcc-01 Near Crusher House Test For Discharge Performance At Low Temperature , Type Test For Chp Mcc-01 Near Crusher House Ampere Hour Capacity , Type Test For Chp Mcc-01 Near Crusher House Retention Of Cahrge , Type Test For Chp Mcc-01 Near Crusher House Life Cycle Test , Type Test For Chp Mcc-02 Near Bunker Area Test For Discharge Performance At Low Temperature , Type Test For Chp Mcc- 02 Near Bunker Area Ampere Hour Capacity , Type Test For Chp Mcc-02 Near Bunker Area Retention Of Cahrge , Type Test For Chp Mcc-02 Near Bunker Area Life Cycle Test , Type Test For Ahp Mcc-01 Near Compressor House Test For Discharge Performance At Low Temperature , Type Test For Ahp Mcc-01 Near Compressor House Ampere Hour Capacity , Type Test For Ahp Mcc-01 Near Compressor House Retention Of Cahrge , Type Test For Ahp Mcc-01 Near Compressor House Life Cycle Test , Stationary Lead Acid Batteries (With Tubular Positive Plates) In Monobloc Containers As Per Is 13369 Total Quantity : 84
Contract Date: Ref. Documents Contract Value : ₹ 88.54 Lakh
Government Departments No of Bidders 2
Tamil Nadu View Result →
21.
Public Administrative Department #7054542 AOC
Tender For CC road construction work from school to Kasams house in village Khedlikaji gap Mungsaka(pas. hill) - In soil filling work, digging a pit on the side of the road and lifting soil 1-5 meters and carrying it up to 50 meters, breaking lumps and laying it in 25 cm layers and pressing and leveling it and making a camber. 2 Transportation of soil for various distances including loading, unloading and stacking of material (length of transportation will be calculated from nearest route and not by road)3 Supply of road construction material after cutting voids. Gravel (cut voids 1/64 Transportation of Murum, Building rubble, Lime, Gravel, Stone aggregate less than 40mm nominal size for various distances including loading, unloading and stacking of material (length of transportation will be calculated from nearest route and not by road)5 Extra per kilometer for distances above 20 km6 Laying, spreading and pressing of gravel, kankar, quarry rubble and coarse aggregate in thickness less than 15 cm (without crushing) on ​​the specified camber and grade of the road, tamping and tamping with roller of 8-10 ton load and all costs of water and tools, machinery along with lead Including rent.7 Laying cement concrete for road foundation and operating needle and surface vibrating machine and mixing broken ballast with 40 mm crusher, and preparing it in desired grade, camber and super elevation.8 Mixing and pouring controlled concrete on the upper surface of cement concrete road and operating needle and surface vibrating machine (vibrator) and preparing it in desired grade, camber and super elevation for non-slippery surface.9 Mixing cement concrete 1:2:4 mixture of 1 cement 2 gravel 4 stone or brick in 50 mm thickness with 12 m nominal ballast, pouring, tamping, pressing and tamping etc.
Contract Date: Mar 12, 2025 Contract Value : ₹ 9.99 Lakh
Local Bodies No of Bidders 1
Rajasthan View Result →
Maharashtra View Result →
Uttar Pradesh View Result →
Maharashtra View Result →
25.
Public Administrative Department #5992799 AOC
Tender For Construction A Room Construction A Room At Ggss School Dabli Vas Moulavi Chak 1 Dbl-A - Tender For One Time Construction Work In R.B.U.M.V. Dabli Melchi Chak 1 Dbl-A - Excavation of soil upto 1.5 m depth in foundation, trench, drain, tamping the bottom, pouring water, beautifying the sides, taking out the excavated soil, filling the empty spaces with soil again after filling the foundation and disposal of the remaining soil upto a distance of 50 meters.2 In cement concrete foundation or floor, put 40 mm nominal size stone aggregate (crusher broken) / brick aggregate in cement-sand mixture in the ratio of 1 cement: 5 sand: 10 soil and tamping, including tamping.3 Foundation and plinth first class brick masonry in cement-gravel mixture of 1:6 or 1:8, including closing the side cracks and tamping.4 Foundation and plinth first class brick masonry in cement-gravel 1:6 or 1:8 mortar, including closing of side cracks and leveling.5 Extra amount for making square or rectangular brick pillars, maximum length upto 1.2 m in superstructure. 6 Centering/Shuttering (planks and sills) for RCC roof, slabs, balcony, lintel etc. upto 4.5 m height and removal etc. as per specifications.7 Supply and casting of reinforced cement concrete of cement concrete 1:2:4/1:1.5:3 mixture, pressing, tamping and levelling of surface with 1:3 cement mortar etc. including scaffolding but cost of steel and shuttering separately.8 Cement plaster on wall using cement-gravel in 1:6 ratio including scraping of joints and regular tamping for 14 days.9 Cutting, bending and fixing of iron at position and fastening work for RCC work including supply.10 Angle Iron Supply and installation of 2 pane door of 22 gauge plain GI sheet in 40X40X3 mm outer frame of angle iron (iron) in 25X25X3 mm conical iron frame with fittings like argal sliding bolt, latches and holding strips etc.11 Supply and installation of 2 pane window of 22 gauge plain sheet in 25X25X3 mm conical iron frame with fittings like 10 mm grill, 3 mm glass and argal sliding bolt, latches and holding strips etc.12 Supply and installation of 14 mesh, 24 gauge iron mesh in iron window and installation with 20 X 3 mm beading and tightening with screws. 13 Laying of first class dry slab brick flooring on 12mm thick mud mortar in Karnakar and filling mud in joints and then filling flat tip cement 1:3 on top.14 providing & appling wall putty (jk/birla or equivalent ) or pop filling complete to achive fine finish(one or more coat)15 wall plastic emulsion paint or approved brand and manufactureto give an evaen shed16 Applying enamel paint in 3 layers to give even shade. Making even surface on new/old work.17 In filling of soil, making a pit on the side of the road and lifting soil 1.5 meters and taking it upto 50 meters, breaking lumps and laying it in 25 cm layers and pressing and leveling and making camber. 18 Transportation from 1 km distance19 Polished Kota stone flooring over 1:4 cement gravel mortar of 20 mm thickness, application of scutting and grinding (minimum 3 times) and jointing by filling the joints with cement slurry etc. (more than 2300 sq. cm)20 P&F rigid PVC Pipe (IS : 4985 mark) class II (4 Kg. / Cm2) approved quality / make including jointing the pipe with solvent cement rubber ring and lubricant : 110 mm dia21 Name plate & photograph22 light fitting
Contract Date: Dec 19, 2024 Contract Value : ₹ 7.95 Lakh
Local Bodies No of Bidders 2
Rajasthan View Result →
Madhya Pradesh View Result →
Maharashtra View Result →
Chhattisgarh View Result →
Maharashtra View Result →
30.
Power #4399069 AOC
Bids Are Invited For Custom Bid For Services - Operation And Maintenance Of Lhp And Pdc In Mines - SCOPE OF WORK FOR LIGNTE HANDLING PLANT AND POWER DISTRIBUTION CENTER 1.0 Regular Operation and Maintenance of Lignite Handling Plant and Power Distribution Centre of Barsingsar Mines for a period of 3 (Three) Years from date of commencement of GeM Contract. The commencement of contract will be start after 7 days from the date of issue of GeM Order. 1.1 Maintenance of the complete equipment’s (both mechanical and Electrical) mainly includes the following: 1.1.1 Maintenance of the complete system, both Mechanical and Electrical to the NLC’s satisfaction. 1.1.2 Attending all the regular and preventive maintenance works, breakdowns, replacement/repair/reconditioning of components/parts. 1.1.3 Supply of all consumables/consumable spares for conveyor system and PDC as per the list enclosed. 1.1.4 Execution of all works with required tools and tackles (as per the list enclosed), labour, supervision and transportation of men, materials etc. to the work spot from yard and vice versa. 1.1.5 Complete inspection of all components and condition monitoring, wherever applicable. The inspection report should be submitted to Purchaser as per PMC (Periodical Maintenance Chart). 1.1.6 For the components/parts and any other material, which are replaced during the maintenance contract period, necessary Test Certificates should be furnished. 1.1.7 Carrying out cold patching/minor hot repair of belt damages and vulcanizing joints, with required chemicals and other materials. 1.1.8 Correction of lining out of the belts, due to any reason. 1.1.9 Belt damages should be avoided during operation and during handling. If there is any substantial damage to the belt, which is attributable to the system/contractor, decision of the Purchaser will be final and binding on both sides. 1.1.10 Balancing and vibration analysis/mitigation of the Double roll Crushers to be carried out as and when required, otherwise suitable penalty will be recovered. In this regard, the decision of the Purchaser will final. 1.1.11 Providing Backhoe cum Loader with operator and fuel, in case of any breakdown of Lump Breakers or for any other allied works of LHP as per the directions of NLCIL executives. The back hoe cum loader engaged for the work shall not be more than 5 years old and shall be equipped with the suitable fire extinguisher. 1.1.12 Arranging services of OEM for equipment repair work/ calibration of belt weigher etc. as and when required. 1.1.13 Lubrication (manual greasing) of all required points, including conveyor drum bearings, snub pulleys, heavy duty rollers, sheave pulleys, take up guide path, pins, etc and applying Cardium compound to all winch ropes and other ropes, as per OEM recommendations. 1.1.14 Topping up/complete changing of oil and other lubricants for all the equipments as per OEM recommendations. 1.1.15 Cleaning of all equipments, components, parts materials etc. (both Mechanical and Electrical) of the conveyor system for trouble free operation and cleaning of complete conveyor system in case of spillage/choking to the satisfaction of Purchaser. 1.1.16 Transportation of all required equipments/ components/parts/materials of mechanical and electrical from yard to site and vice versa. 1.1.17 Attending any other work for smooth running of the conveyor, which are not specifically mentioned and all other related and coincidence works, as required by the Purchaser, then and there. 1.1.18 Safety & security of all the conveyor equipments, men and other materials. 1.1.19 Periodical maintenance of Transformers, LT panels, VCBs, isolators, cables, streetlights, Energy management system etc., 1.1.20 Cleaning & checking of all (Transformer, HT breakers, LT panel and the connected equipments, etc. Shall be minimum of 4 times per year) according to site requirement. 1.1.21 Necessary testing equipments, duly calibrated at any Government approved laboratory shall be used for testing. 1.1.22 LT Cable faults shall be located and also be attended to, by providing suitable joints. 1.1.23 The earth pits shall be of treated earth then and there. 1.1.24 Up keeping of the Electrical equipments and necessary caution board is to be provided and maintained. 1.1.25 Supply of safety appliances as Mines Safety Rules to all the engineers, supervisors and workers engaged by the contractor and compliance of all statutory requirements. 1.1.26 Adhering to all statutory requirements and safety norms applicable as per Mines Act, Coal Mines Regulations Act and Indian Electricity Rules 1.1.27 Providing sufficient manpower for the operation and maintenance of the conveyor equipments and power distribution center, in all three shifts, to the satisfaction of the Purchaser: a) Shift Timings: I shift- 6:00 Hrs. to 14:00Hrs II shift-14:00 Hrs to 22:00 Hrs III shift-22:00 Hrs to 6:00 Hrs General Shift- 09:00 Hrs to 17:00 Hrs b) Rate of wage of all workmen (including site engineers and site manager) is applicable for a period of 26 days only i.e. a particular workman (irrespective of labour, site engineers or site manager) shall not be engaged for more than 26/27 days per month as the case may be in concurrence with the labour law. c) Since operation is carried out in all three shifts, site engineers/ supervisors/workmen must be available at site 24/7 considering safe operation. Hence, the contractor has to arrange substitute/reliever site engineers/workmen (for both mechanical and electrical) for weekly off’s, leave, PH and absenteeism failing which penalty shall be imposed as per Clause 9.0.3 and 9.0.4 of “Special Conditions”. Provision is made for Supervisory Charges for the same in Price Schedule-II. 1.1.28 Providing Qualified manpower 1.1.29 Induction of manpower is subjected to verification of documents and oral interview by NLCIL officials which shall be final and binding (i.e. even though workmen possess required eligibility and are not competent enough as decided by NLCIL officials then those workmen won’t be inducted considering mechanical and electrical safety) 1.1.30 The Electrical contractor/ Sub Contractor should also be in possession of valid Electrical Contractor’s License of Grade ESA/EA issued by competent authority. 1.1.31 Supply of safety appliances should be as per Mines Safety Rules to all the engineers, supervisors and workers engaged by the contractor and compliance of all statutory requirements. 1.1.32 Adhering to all statutory requirements and safety norms applicable as per Mines Act, Coal Mines Regulations Act and Indian Electricity Rules. 1.1.33 Clearing of all materials, Leveling, Ground Preparation, Fencing and construction of temporary sheds for Contractor’s Maintenance Site Office, Stores rooms and Workshops, safety of Men and Material at the above places and arrangement of power and water supply from the locations shown by the Purchaser. 1.1.34 Facilitation and carrying out all other works connected with the contract, which are not covered under Sl. no. 1.3 “Responsibilities of the Purchaser during O&M Contract Period”, will be the scope of the contractor.Total Quantity :
Contract Date: Ref. Documents Contract Value : ₹ 6.49 Crore
Government Departments No of Bidders 1
Rajasthan View Result →
Madhya Pradesh View Result →
Chhattisgarh View Result →
Chhattisgarh View Result →
Chhattisgarh View Result →
Chhattisgarh View Result →
36.
Petroleum and Natural Gas #1252892 AOC
The System Design Manufacturing Testing Supply Installation And Commissioning Of Plant And Machinery Equipment Electrical And Other Related Works For Setting Up Of Proposed Site Mixed Bulk Explosives Plant At Umrer Dist Nagpur Mh . - 2 Supply Of Ss Hold Tank For Storage Of An / Cn Melt Of 103 Kl Capacity, Moc: Ss-304 L ( Bottom 8 Mm, Shell 6 Mm And Top 5 Mm Thick ) , Size - 4500 Mm Dia X 6750 Mm Height, Tank Will Be Vertical, Cylindrical Flat Bottom & Conical Self-Supported Roof With Proper Sand Leveling, Grouting Along With Electrical Work And Piping Work With Necessary Fittings, Accessories. The Specifications And Requirement Of The Hold Tank And Accessories Will Be As Per The Details Mentioned In Brief Scope Of Work. Piston Valve- 50 Nb-1 No, Solenoid Actuated Valve -50 Nb- 3 Nos, Ball Float Steam Trap -25 Nb-4 Nos, Globe Valve-25 Nb-4 Nos, 2 Way Ball Valve 65 Nb- 2Nos, 3 Way Actuator Operated Ball Valve 40 Nb- 2Nos, 2 Way Ball Valve 40 Nb- 1 No, 2 Way Ball Valve 25 Nb- 2Nos And Suitable Centrifugal Pump-1 No. 3 Supply Of Electrical Work – Laying Of Cable And Electrical Fixtures 4 Supply Of Ss Piping Of 50 Nb Dia Long With Necessary Bends And Fittings For Process Piping With Heat Tracing And Insulation 5 Supply Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Suitable For Ss Piping & Flexible Chemical Hose 6 Supply Of Ss304 Flanges 50 Nb Size For Process Piping 7 Supply Of Ss304 Valves 50 Nb Size For Process Piping 8 Supply Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From One Point To Hold Tanks 9 Supply Of 50Nb Valves For Steam Piping 10 Con. Reducer 50 X 40 Nb, Ss-304L, #150 11 Supply Of Float Type 25 Nb Steam Traps 12 Supply Of 80 Kl Storage Tank For Oxidizer Phase ( Op ) Of 4500 Mm Dia X 5000 Mm Straight Height. Material Of Construction - Ss304, Plate Thickness - Shell 6 Mm, Top Cover 5 Mm And Bottom Plate 8 Mm. Vertical, Cylindrical, Flat Bottom, Conical Flanged Top With Supports Welded With 75X75 X8 Mm Angle Ring, The Tank Will Be Complete With 125 Mtrs, 40 Nb Sch 40Spiral Ss304 Coil, In Two Parts For Necessary Steam Heating. It Will Also Be Completed With All Necessary Nozzle, Drain, Vent, Support Lugs, Heat Exchangers, Insulated, Liquid Level Transmitter Having Lcd Display And Suitable Ms Ladder With Railing At The Top And Sampling Point Having An Arrangement Of Two Valves For Drawl Of One Liter Of Sample. Piston Valve 50 Nb-2 Nos, Solenoid Actuated Valve 50 Nb-4 Nos, Solenoid Actuated Valve 50 Nb-4 Nos, Globe Valve -25 Nb-6 Nos, 3 Way Actuator Operated Ball Valve 40 Nb- 1No, 2 Way Ball Valve 25 Nb- 2Nos, 2 Way Ball Valve 80 Nb- 2Nos, 3 Way Ball Valve 40 Nb- 2Nos, 3 Actuator Operated Ball Valve 40 Nb- 2Nos And Suitable Centrifugal Pump-1 No. 13 Supply Of Electrical Work – Laying Of Cable And Electrical Fixtures 14 Supply Of Ss Piping Of 50 Nb Dia Long With Necessary Bends And Fittings For Process Piping With Heat Tracing And Insulation 15 Supply Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Suitable For Ss Piping & Flexible Chemical Hose 16 Supply Of Ss304 Flanges 50 Nb Size For Process Piping 17 Supply Of Ss304 Valves 50 Nb Size For Process Piping 18 Supply Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From One Point To Hold Tanks 19 Supply Of 50Nb Valves For Steam Piping 20 Con. Reducer 50 X 40 Nb, Ss-304L, #150 21 Supply Of Float Type 25 Nb Steam Traps 22 Supply Of 24 Kl Storage & Blending Tank For Oxidizer Phase ( Op ) Of Id Of Tank: 3580Mm, Tank Wall Thickness 6Mm Plus 50Mm Space For Insulation Material All Around The Tank, Thus Total Od Of Tank Shall Be Approx. 3692Mm X Height Of Tank Wall: 2600Mm, Plus Channel Support Of 200Mm At The Tank Base & Top, Thus Total Height Of Tank From Floor Level Shall Be 3000Mm Straight Height. Tank Material Of Construction - Ss304, Plate Thickness - Shell 6 Mm, Flanged Flat Top 4 Mm, Flat Bottom 8 Mm With Ms Channel Support, The Blend Tank Will Be Vertical, Cylindrical, Flat Bottom, Flat Flanged Top, Complete With 90 M, 40 Nb Sch 40 Spiral Ss304 Coil In Two Parts, 90 Mm Dia Shaft Along With 02 Numbers Of Pitch Blade Top Entry Turbine Agitator At Different Depth, 65-70 Rpm With Supports, All Necessary Nozzle, Drain, Vent, Support Lugs And Ms Platform With Railing And Suitable Ladder And 20 Hp, Ip 55, Tefc Motor With Suitable Electrical Power Switch, Gear Box Along With Insulation Of Tank By 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg. Height Of Manhole Collar To Be Max 200 Mm So That It Is Within The Height Of Channel Support At The Top Of Tank And It Does Not Interfere During Placement Of Tank. Manhole Size Required Minimum 600 Mm Id At The Top Of Tank For Feeding Of An & Cleaning Of Tank. Providing Feed Hopper To Be Fitted On Manhole Having Square Shape ( Approx. 1M X1m ) At Top And With Bottom Dia Equivalent To Manhole Dia With Fixing Arrangement With Nut & Bolts Of Ss Is Required For All Tanks. Other Details Are Mentioned In Scope Of Work. 23 Supply Of Ss304 Flanges 50Nb For Above Process Piping 24 Supply Of Ss304 Valves 50 Nb Size For Above Process Piping 25 Supply Of Electrical Work – Laying Of Cable - Approx. 3Ø Power Supply To Electrical Fixtures Attached To Blend Tanks, Pumps And Boilers 26 Supply Of Flexible Chemical Hose For Oxidizer Phase Unloading And Transfer Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 27 Supply Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Flexible Chemical Hose - Of Bj Corporation Make Or Equivalent 28 Supply Of Insulated Steam Transfer Piping Of 40Nb Ms Pipe With Flanges And Pipe Fittings Form Supply Line To The Proposed Blend Tanks 29 Supply Of Insulated Steam Transfer Piping Of 25Nb Ms Ibr Seamless Pipe With Flanges And Pipe Fittings For Recovery Of Condensates 30 Supply Of 40Nb Valves For Steam Piping 31 Supply Of 25Nb Valves For Steam Piping 32 Supply Of Float Type 25 Nb Steam Traps 33 Supply Of Storage Tank ( Moc-Ms ) Of 40 Kl Capacity With Additional Provision For 5% Air Space , Moc-Is 2062, Size-3600 Mm Dia X 4000 St. Ht. . The Tank Will Be Vertical, Cylindrical, Flat Bottom And Conical Top To Be Fabricated From Is 2062 Quality Plates. Shell & Top Will Be From 6 Mm Thk Plates And Bottom Will Be 8 Mm Thick. Complete With Steam Heating Coil Of Approx. 80 Mtrs. Of 25 Nb Sch 10 Ms Pipe Coil. The Tank Will Be Completed With Necessary Drain, Vent Etc. The Tank Will Be Insulated By 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg Along With Suitable Ladder & Railing With Ms Structure With Anticorrosive Paint Along With Walkway Over The Tanks By Gratings / Chequered Plate. Walkway Of Both Tanks Will Be Interconnected. 2 Nos. Lightning Arrester With 2 Nos. Earth Pit And Suitable Foundation. Piston Valve 50 Nb-2 Nos, Solenoid Actuated Valve 50 Nb-4 Nos, Thermo Dynamic Steam Trap 25 Nb-4 Nos, Globe Valve 25 Nb-4 Nos, 3 Way Actuator Operated Ball Valve 50 Nb- 1 No, 2 Way Ball Valve 50 Nb- 2Nos 34 Supply Of Oil Pipe - 80 Nb Dia, Ms Pipe Along With Necessary Valves And Fitting And Strainers For Unloading Of Furnace Oil Tankers 35 Supply Of Gear Pump Of Capacity 300 Lpm With Flame Proof Motor With Suction And Discharge Port Of 2 36 Supply Of Oil Pipe- 2 Dia, Ms Along With 04Nos. Valves And Fitting With Heat Tracing And Insulation 37 Supply Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings 38 Supply Of 50Nb Valves For Steam Piping 39 Supply Of Insulated Steam Transfer Piping Of 25Nb Ms Pipe With Flanges And Pipe Fittings For Condensate 40 Supply Of 25Nb Valves For Steam Piping 41 Supply Of Float Type 25 Nb Steam Traps 42 Motor Starter Panel / Box ( 3-Ph, 50Hz, 415V, Rated Current 20A, S.C Current 50Ka, 1 Sec Mcc With Ip54 Protection, Starter Rating 10Hp Dol, Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Start / Stop Pb, 1No. Mcb As Per Type -2 Co Ordination Selection ) ( Specification: Wall / Structure Mounting, Non-Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Powder Coated Panting Shade: Ral 7035 ) - L&T / Siemens / Standard Make And Will Be Feed From Existing Electrical Panel. 43 Cable 1100V Grade Multi Strand Armoured Cable As Per Is:7098 ( Part-1 ) / 1988 Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement - 4Cx16 Sq Mm. Al. Xlpe Cable 44 Supply Of Fuel Phase ( Fp ) Blend Tank, 2.5 Kl Capacity, 1350 Mm Dia X 1800 Mm Height, Material Of Construction - Is 2062, Plate Thickness - Shell And Top 5 Mm, Bottom Dish 6 Mm, The Blend Tank Will Be Vertical, Cylindrical, Dished Bottom, Flat Flanged Top, Complete With 20 M, 25 Nb Sch 40 Spiral Coil, 50 Mm Dia Shaft Along With Pitch Blade Turbine Agitator, With All Necessary Nozzle Drain, Vent, Support Legs & Ladder And 2 Hp Tefc, Ip 55 Motor And Suitable Gear Box For Driving Turbine Agitator And Load Cell With Least Count Of 1 Kg And Max Net Weight Carrying Capacity Of 3000 Kg. Supply Of Temperature Controller With Suitable Arrangement To Maintain Temperature Of Fuel Phase In The Range Of 40-60° C. Piston Valve 25 Nb-2 Nos, Solenoid Actuated Valve 25 Nb-2 Nos, Thermo Dynamic Steam Trap 20 Nb-2 Nos, Globe Valve 20 Nb-2 Nos, 2 Way Ball Valve 25 Nb- 2Nos, 3 Way Ball Valve 20 Nb- 2Nos, Disc Check Valve20 Nb- 2Nos 45 Supply Of Basket Strainer For Oxidiser Phase, 75 Ltrs Capacity, Make Of Construction - Vessel Ss 304 And Jacket Is 2062, Vessel Shell 5 Mm, Bottom Dish 6 Mm, Top Plate 6 Mm, Jacket Shell 5 Mm, Dish 6 Mm, The Strainer Will Be Vertical, Cylindrical, Dished Bottom, Flat Flanged Top Jacketed Vessel Complete With Perforated Strainer With 18 Mesh Ss Filter Cloth, Inlet / Outlet Nozzle, Drain Etc. 46 Supply Of Basket Strainer For Fuel Phase - 50 Ltrs Capacity, Material Of Construction Ss 304, Plate Thickness - Vessel Shell 5 Mm, Bottom Dish 6 Mm, Top Plate 6 Mm, Jacket Shell 5 Mm, Dish 6 Mm, The Strainer Will Be Vertical, Cylindrical, Dish Bottom, Flat Flanged Top, Jacketed Vessel Complete With Perforated Strainer With 18Mesh Ss Filter Cloth, Inlet / Outlet Nozzle, Drain Etc. 47 Supply Of Screw Pump, Rmab 601 Of Make Roto Pumps Ltd Or Any Other Suitable Better Make For Transferring Oxidizer Phase To Blender And 7.5 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate 48 Supply Of Screw Pump, Rdaa 492 Of Make Roto Pumps Ltd Or Any Other Suitable Better Make / Gear Pump For Transferring Fuel Phase To Blender And 2.0 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate. 49 Supply Of Emulsion Blender Of 150 Kg / Min Capacity, 208 Mm O / D X 458 Mm Long, Material Of Construction - Body Of Aluminium 8 Mm, Rod 9.5 Mm, Rotating Shaft Ss 410, 28.5 Mm Dia, Blades Ss 410, 5 Mm Thick, Blender Will Be Horizontal Cylindrical Complete With Series Of Pin And Rotating Shaft Complete With Shear Blades, End Bearing With Seals And 25 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling Base Plate 50 Supply Of Control Panel Comprising Of Variable Frequency Drive ( Vfd ) Panel Consisting Of Danfoss Or Equivalent Make Frequency Converter Suitable For Three Phase 415 Volts Motor Of Following Capacity A ) 7.5 Hp, B ) 2.0 Hp, C ) 25 Hp, D ) 7.5 Hp Along With Rpm Indicators 51 Supply Of Inline Magnetic Flow Meter / Mass Flow Meter For Ob Ss 304, Range 60 - 150 Lpm Of Ie Or Equivalent Make. 52 Supply Of Inline Magnetic Flow Meter / Mass Flow Meter For Fp Ss 304 Range 5 - 20 Lpm Of Ie Or Equivalent Make 53 Supply Of Screw Pump- Wmaa 602 Of Roto Pumps Ltd Or Any Other Suitable Better Make For Transfer Of Emulsion Matrix From Product Pump To Silo And 7.5 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate 54 Supply Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 55 Supply Of Flexible Chemical Hose For Oxidizer Phase Unloading And Transfer Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 56 Supply Of Furnace Oil / Hsd Unloading And Transfer Line With Suction Line Of 50 Nb & Delivery Line Of 40 Nb, Sch 10, Material Of Construction Ms As Per Site Requirement 57 Supply Of Oxidizer Phase -Filter - Screw Pump - Flow Meter Line With Suction Line 65 Nb & Delivery Line Of 50 Nb, Sch 10, Material Of Construction Ss 304 As Per Site Requirement 58 Supply Of Flexible Chemical Hose For Oxidizer Phase - Flow Meter - Blender Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 59 Supply Of Fuel Phase ( Fp ) - Filter - Pump - Flow Meter Line With Suction Line 50 Nb & Delivery Line 25 Nb, Moc Ss 304 60 Supply Of Fuel Phase - Flow Meter - Blender - 1.0 Inch Flexible Hose Of Gates Make Or Equivalent With Both Ends Fitted With Quick Coupler Of Bj Or Any Other Suitable Better Make 61 Supply Of Emulsion Matrix Transfer Line From Blender To Silo - 65 Nb Sch 10 Ss 304 62 Supply Of Quick Release Coupling Set ( Male And Female ) For Fixing 50 Mm Id Transfer Hoses With Blend Tank Outlet - Of Bj Corporation Make Or Equivalent 63 Supply Of Ss 304 Three Way Ball Valve 65 Mm Between Emulsion Matrix Transfer Line From Blender To Silo 64 Supply Of Gear Pump Of Capacity 300 Lpm With Flame Proof Motor With Suction And Discharge Port Of 2 For Preparation Of Fuel Phase, Base Plate, Suitable Hopper, Starter / Panel ( As Per Site Condition ) 65 Supply Of Silo For Storage Of Emulsion Matrix Of 24 Kl ( 30T ) Capacity, Moc-Is 2062, Size-3000 Mm Dia X 3000 Mm Height X 750 Mm Conical Height, Silo Will Be Vertical, Cylindrical, Conical Bottom And Top Complete With All Necessary Nozzle, Vent, Support Bracket, With Suitable Platform With Ladder To Access The Various Inlets / Outlets At The Top Of The Silo Along With Insulation Of 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg With Epoxy Paint Inside Silo. 3 Way Ball Valve 125 Nb- 2Nos, Butterfly Valve Actuator Operated 65 Nb- 1Nos 66 Supply Of Digital Load Cells ( Mettler Toledo Make ) For Silo 67 Supply Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 68 Supply Of 2.5 Inch Id Flexible Hose Of Gates Make Or Equivalent With Both Ends Fitted With Quick Coupler Of Bj Make 69 Supply Of Emulsion Matrix Transfer Line From Hopper Of Screw Pump To Pump Trucks And Emulsion Tanker To Silo - 65 Nb Sch 10 Ss 304. 70 Supply Of Ss 304 Flanges For Above Process Piping 71 Supply Of Ss 304 Valves For Above Process Piping 72 Supply Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Flexible Chemical Hose - Of Bj Corporation Make Or Equivalent Along With Suitable 1 No. Dust Cap 73 Supply Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 74 Supply Of Rotary Gear Pump With Impeller Nitrile Rubber With Electric Motor And Suitable Gear Box Make: Napco Or Equivalent Capacity :3’’ -400 Lpm, Discharge :10 Bar 75 Design & Supply Of Single Roll Crusher Of Capacity 15-16 Mt / Hr For Crushing High Density Ammonium Nitrate Lumps ( Bag Size ) 750 Mm X 500 Mm X 250 Mm With Opening Of The Crusher 900 Mm ( Approx ) X 550 Mm ( Approx ) And Output Size 40 Mm Approx Along With Suitable Drive And Motor And Starting Panel And Supply Cable And Necessary Safety Features Including Providing Of Suitable Civil & Structural Foundation And Suitable Placement Of Tail End Of The Conveyor And Support System Along With Charge Hopper Above The Crusher Opening And Platform For Keeping Pallets Of Hdan And Space For Manual Charging Of Bags In To Crusher As Per The Details Mentioned In Brief Scope Of Work. 76 Design & Supply Of High Density Ammonium Nitrate Conveying System Through A Belt Conveyor Of Width 800-1000 Mm & Cd Of Approx 35-40 M Along With Skirting Arrangement On Both Edges Of The Conveyor And Suitable Drive, Motor, Starting Panel And Supply Cable And Necessary Safety Features Along With 4 Nos. Discharge Points / Ploughs For Feeding 4 Nos. Blend Tanks Falling In The Discharge Zone Of Around 20M. ( The Tanks Are Of Dia 3692 Mm-Od With A Centre To Centre Gap Of 5000 Mm Between The Tanks ) With Total Lift Requirement Of Around 3M From Tail End To Discharge Zone Including Providing Of Suitable Civil & Structural Foundation For Supporting The Conveyor System Along With Side Walk Ways As Per The Details Mentioned In Brief Scope Of Work. 77 Supply Of Fo Fired Boiler Unit Rxd-850 ( 850 Kg / Hr ) Working Pressure Of 10.54 Kg / Cm2 With Economizer Of Thermax Make Only 78 Supply Of Softner Ez30 Of Thermax Make Only 79 Supply Of Filter Ez40 Fdm Of Thermax Make Only 80 Supply Of Oxidation Chamber- E Z200c Of Thermax Make Only 81 Supply Of Mild Steel Chimney ( Self Supported ) Of 300 Mm Top Diameter And 18 Mtrs Height ( Approx ) Along With Flue Gas Duct With Supporting Structure, Sampling Collection Point, Platform For Collection & Spiral Ladder Up To Collection Point And Ladder From Collection Point To Top - To Cater 2 Nos Of 850 Kg / Hr Boilers Including Duct Piping From Boilers To Chimney, Lightning Arrester And Light Indicator Over Chimney With 2 Nos. Earth Pit And Suitable Foundation 82 Supply Of Pressure Reducing Station, Range- In Let Pressure 10.54 Kg / Cm2, Out Let Pressure 3.5 Kg / Cm2 Max, Steam Flow-Max. 3000 Kg / Hr, Body-C.S, Inlet Size-80Mm, Outlet-100Mm With Cast Steel Valve Prv Size 50Mm Flange Class Asa 150 83 Supply Of Ms Day Tank For Fo - 3 Kl Capacity ( Round Tank With 5 Mm Plate ) With Level Indicator, 2 Nos Of 6Kw Heaters Along With Temp. Controller And Cut Off Switch Along With Ms Piping From Day Tank To Boilers 84 Supply Of 4 Nos Of Hdpe Day Tanks For Soft Water Of 3 Kl Capacity Each, Along With Ms Piping From Day Tank To Boilers 85 Supply Of Insulated Steam Header Piping 6 Ms Ibr Seamless Pipe Thickness 8Mm With Airvent, Pressure Relief, Safety Valve, Pressure Gauge And Draining Of Steam Condensate Through Steam Trap, 2 Nos Outlet For 2 Nos Prs With Provision Of Suitable Length With Flanges And Pipe Fittings Along With Nrv 4 Nos In Between Boiler Output And Steam Header With Necessary Bend And Fittings For Catering Steam Output From 2 Nos Boilers 850 Kg / Hr Each And 5 Nos More Points For Future Expansion In Same Header ( With A Provision For Up Gradation To 6000 Kg / Hr ) 86 Supply Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From Boiler Outlet / Steam Header To Prs To Blend Tanks 87 Supply Of Insulated Steam Transfer Piping Of 80Nb Ms Pipe With Flanges And Pipe Fittings For Recovery Of Condensate From Blend Tanks To Condensate Recovery Tank 88 Supply Of Insulated Steam Transfer Piping Of 25Nb Ms Pipe With Flanges And Pipe Fittings For Steam Supply / Condensate Collection 89 Supply Of 50Nb Valves For Steam Piping 90 Supply Of 25Nb Valves For Steam Piping 91 Supply Of Float Type 25 Nb Steam Traps 92 Supply Of Water Line - 2 Dia, Gi, Class B Along With Necessary Valves And Fittings As Per Site Requirement 93 Supply Of Water Line - 1 Dia, Gi, Class B Along With Necessary Valves And Fittings As Per Site Requirement 94 Supply Of Furnace Oil - 1.5 Dia, Ms Along With Necessary Valves, And Fitting With Heat Tracing And Insulation 95 Supply Of Furnace Oil - 1 Dia, Ms Along With Necessary Valves, And Fitting With Heat Tracing And Insulation 96 Supply Of Monoblock Pump 2Hp, Connection Size 2 For Delivery Up To Height Approx 40 Feet - Reputed Make Like Kirloskar / Ksb Or Equivalent 97 Supply Of Boiler Area Mcc Panel ( 3-Ph, 50Hz, 415V, Rated Current 250A, S.C Current 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Ammeter, Voltmeter With S / S, Ct, R / Y / B & On / Off Indication And O / G With On / Off Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay { As Per Type 2 Coordination } , On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No. Mcb ) ( L&T, Siemens / Equivalent ) ( The Panel Will Be Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, Ip:54 With Powder Coated Panting Shade: Ral 7035 ) ( Make Of Mccb / Mpcb, Contactor, O / L Relay, Mcb : L&T / Siemens / Equivalent, Led Indication Lamp / Pb / Ss : Siemens / Teknic / Kaycee / Equivalent, Mfm : Schneider / Equivalent, Ameter / Voltmeter : Ae / Rishabh / Equivalent ) N ( I ) Incoming Feeders - 250 A Tp + N, Mccb With O / C, S / C Protection, Extended Rotary Handle, Aux. Contact - 1 No. ( Make-L&T / Siemens / Equivalent ) . N ( Ii ) Outgoing Feeders - ( A ) 32A Tpn Mcb For New Boiler Fo Fired 850Kg / Hr Boiler - 4 Nos. ( B ) 6Kw Heater Feeder ( 32A Tp Mcb, Contactor And Temperature Controller For Heater For Fo Pre-Heating - 4 Nos. ( C ) 2Hp Dol Motor Starter Feeder For Mono-Block Pump - 4 Nos. ( D ) Lighting Feeder ( Consisting Of - 6Nos. 16A Dp Mcb ) - 1No. ( Make-L&T / Siemens / Equivalent ) N ( Iii ) Supply Of Separate 1 No. 250A Mccb For Main Mcc Panel 98 Supply Of 3.5 Core 120 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement 99 Supply Of 4 Core 10 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement 100 Supply Of 3 Core 2.5 Sq Mm Pvc Insulated & Pvc Sheathed Copper Conductor Unarmoured Submersible Flat Power Cable Of 1100 V Grade Conforming To Is 8130 Along With Cable End Termination And Cable Lug ( Copper ) As Per Site Requirement 101 Design, Procurement, Manufacturing, Testing & Supply Of 50 Kl Ms Tank 3500 Mm Dia X 5250 Mm Height With Accessories 102 Supply Of Diesel Operated Pump Set Complete In All Respect I.E. Comprising Pump, Motor Of 1450 Rpm, Pin Bush Type Coupling, Coupling Guard, Common Base Frame, Cushy Foot Mounting, And Foundation. Na ) Fire Pump Of Capacity 2280 Lpm – ( 137 M3 / Hr ) ( Make-Kirloskar / Ksb / Greaves ) 103 Supply Of Pump Set Complete In All Respect I.E. Comprising Pump, Motor Of 1450 Rpm, Pin Bush Type Coupling, Coupling Guard, Common Base Frame, Cushy Foot Mounting, And Foundation. Nb ) Jockey Pump Of Capacity 180 Lpm. ( Make-Kirloskar / Ksb / Greaves ) 104 Supply Of Pressure Switch With Guide Valve And Pressure Damper Including Necessary Fitting. 105 Supply Of Combined Starting Panel For Above Four Nos. Pump Set, With Star-Delta Type Starter For Fire Pump & D.O.L. Type Starter For Jockey Pump. 106 Supply Of Pressure Gauge ( 100Mm Dia & 0 To 15 Kg / Sq.Cm ) With Guide Valve And Pressure Damper Including Necessary Fittings. 107 Supply Of Single Headed Oblique Type Hydrant Valve ( Alloy Steel ) As Per Is: 5290 With Pvc Blank Cap. 108 Supply Of 63Mm X 15 Mtr. Long Hose As Per Is: 8423, Bounded With Pair Of Steel Coupling As Per Is: 903. 109 Supply Of Front Glassed Single Door Powder Coated M.S.Hose Box ( 16 X 18 Swg ) Of Standard Design To Accommodate One Branch Pipe With Nozzle And 2 Lengths Of 63Mm X 15 Mtr. Long Hose. 110 Supply Of C.I. Flanged Gate Valve As Per Is: 14846, Pn 1.6 Of 100Mm Nb 111 Supply Of C.I. Flanged Non Return Valve As Per Is: 5312, Pn 1.6 Of 100Mm Nb 112 Supply Of Aboveground / Underground M.S. Piping Conforming To Is: 1239 / 3589 With Fitting, Support, Clamp And Treatment On Outer Surface By One Coat Of Primer & Two Coats Of Synthetic Enamel Red Paint For 100Mm Nb, M.S., Medium ( Schedule 40 ) 113 Supply Of Aluminium Armoured Cable For Supply To Panel ( Size – 3C X 95 Sq. Mm. ) 114 Supply Of Aluminium Armoured Cable For Supply Panel To Motor ( Size – 3C X 50 Sq. Mm. ) 115 Supply Of Mono Block Pump Set To Fill The Water Tank ( Pump Rating – 1 Hp, 2900 Rpm, Single Phase, 220 V ) 116 Supply Of Gi Pipe For Water Tank Inlet Pipeline 1” 117 Supply Of Earthing Material I.E. Gi Pipe, Charcoal, Aluminium Strip, Salt Etc. 118 Supply Of 300 Ltr. Ss Kettle With Agitator With 2 Way Ball Valve 40 Nb- 2Nos, 2 Way Ball Valve 25 Nb- 2Nos 119 Supply Of Screw Pump, Rdaa 492 Of Make Roto Pumps Ltd Or Suitable Centrifugal Pump For Transferring Kettel To Tank And 2.0 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate. 120 Supply Of 25 Nb Pipe, Moc Ss 304 Necessary Nozzel, Bend , Valve Etc 121 Supply Of Hdpe Day Tanks Of 3 Kl Capacity 122 3-Ph, 50Hz, 415V, Rated Current 800A, S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc ( Main Mcc In Mcc Room ( Panel 1 ) With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , C / T, Mfm, R / Y / B & On / Off Indication And O / G With On / Off / Trip Indication ) ( L&T / Siemens / Equivalnt ) ( Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Powder Coated Panting Shade : Ral 7035 ) A ) Incoming Feeders - 800A, 4P 50Ka Mdo Acb With Microprossor Based Released - 2 No. ( I / C From 315Kva Transformer & I / C From D.G Set ) . B ) Bus Coupler Feeders - 800A, 4P, 50Ka Mdo Acb With Microprossor Based Released - 1No., C ) Outgoing Feeders - 630A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 2 Nos, & 400A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 3 Nos, & 160A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 3 Nos & 100A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 1 No. & 63A Tp, Mccb With O / C, S / C Protection ( Microprossor ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 2 Nos. & 32A Tp, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. & Trip Alarm Contact- 1 No. 123 3-Ph, 50Hz, 440V, 260 Kvar Capacitor Panel ( Panel 8 ) In Mcc Room With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, ( L&T / Siemens / Equivalnt ) ( Floor Mounting, Free Standing Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Powder Coated Panting Shade : Ral 7035 ) A ) Incoming Feeders - 630A, Tp 50Ka Mccb With Extended Rotary Handle - 1 No. B ) Outgoing Feeders - 50Kvar - 4 Nos, 25Kvar- 1 No., 15Kvar - 1 No., 10Kvar - 1 No., 5Kvar - 1 No. ( The Capacitor Panel Will Be With 7 Stage Automatic Power Factor Correction Relay And Auto / Manual Provision And Each Bank Feeder Consist With Suitable Rated Fuse, Capacitor Duty Contactor, Push Button, Led Indication Lamp, Timer Etc. 124 Boiler Area Mcc ( Panel 2 ) ( 3-Ph, 50Hz, 415V, Rated Current 160A, S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter, Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No. Mcb ) ( L&T, Siemens / Equivalent ) ( Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panting Shade: Ral 7035 ) A ) Incoming Feeders - 160A 50 Ka 4 Pole, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact- 1 No, B ) Outgoing Feeders - 16A 50 Ka 4 Pole, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact- 6 Nos & 32A 50 Ka 3 Pole, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact- 6 Nos For Lighting Feeder. 125 Process Area - I Mcc ( Panel 3 ) ( 3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 400A, 4P, Mccb With O / C, S / C Protection ( Microprocessor ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders- 15 Kw Star / Dalta Motor Starter Feeder - 6 Nos. & 7.5 Kw Star / Delta Motor Starter Feeder - 9 Nos., 125 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos. & 32 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos For Lighting Feeder. 126 Process Area - 2 Mcc ( Panel 4 ) ( 3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 400A, 4P, Mccb With O / C, S / C Protection ( Microprocessor ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders- 7.5 Kw Star / Dalta Motor Starter Feeder - 9 Nos., 5.5 Kw Dol Motor Starter Feeder - 3 Nos., 3.7 Kw Dol Motor Starter Feeder - 7 Nos., 2.2 Kw Dol Motor Starter Feeder - 4 Nos., 1.5 Kw Dol Motor Starter Feeder - 9 Nos., 100 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 3 Nos. & 32 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 5 Nos For Lighting Feeder. 127 Fire Pump And Repair Shop Panel Mcc ( Panel 5 ) ( 3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Wall / Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 160A, 4P, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders- 37 Kw Star / Dalta Motor Starter Feeder - 2 Nos., 5.5 Kw Dol Motor Starter Feeder - 3 Nos., 125 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos. & 6 A Spmcb- 2 Nos For Lighting Feeder. 128 Office Area Utility Panel ( Panel 6 ) ( 3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Wall / Floor Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 100A, 50 Ka, 4P, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders- 63 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos. & 32 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 2 Nos. For Lighting Feeder. 129 Repair Shop Panel ( Panel 7 ) ( 3-Ph, 50Hz, 415V, Rated Current 63A S.C. Current 16 / 25 / 50Ka, 1 Sec Mcc With Ip54 Protection With Aluminium Bus Bar Consisting Of Following Feeders, Mcc / Pdb ( I / C Feeders Are Consisting Of Digital Ammeter, Digital Voltmeter , Ct, R / Y / B & On / Off / Trip Indication And O / G With On / Off / Trip Indication, All Motor Feeders Consisting With Mccb / Mpcb, Contactor, O / L Relay, On / Off / Trip Indication, Local / Remote S / S, Start / Stop Pb, 1No Mcb ) ( L&T, Siemens / Equivalent ) ( Floor / Wall Mounting, Free Standing, Compartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Power Coated Panring Shade: Ral 7035 ) A ) Incoming Feeders - 63A, 50 Ka, 4P, Mccb With O / C, S / C Protection ( Thermal Magnetic ) , Extended Rotary Handle, Aux. Contact - 1No. B ) Outgoing Feeders - 32 A 3 Pole 50 Ka Mccb With Thermal Magnetic Realease- 5 Nos., 2.2 Kw Dol Motor Starter Feeder - 2 Nos. & 1.5 Kw Dol Motor Starter Feeder - 2 Nos. 130 Supplying And Fixing Of Following Ways Surface / Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs ( But Without Mcbs And Incomer ) As Required . ( Note: Vertical Type Mcb Tpdb Is Normally Used Where 3 Phase Outlets Are Required. ) A ) 8 Way ( 4 + 24 ) , Double Door 131 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) A ) 4 Way ( 4 + 12 ) , Double Door 132 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) B ) 6 Way ( 4 + 18 ) , Double Door 133 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A ) 63 A 4 Pole 10 Ka Mcb 134 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. B ) 32 A 4 Pole 10 Ka Mcb 135 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. C ) 16 A 3 Pole 10 Ka Mcb 136 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. D ) 16 A Single Pole 10 Ka Mcb 137 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. E ) 10 A Single Pole 10 Ka Mcb 138 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. F ) 6 A Single Pole 10 Ka Mcb 139 Supply Of D.P. Structure Using 2 Nos. 11 Mtr. Long ( 200 Mm X 100 Mm X 5.7 Mm Thick ) M.S. Joist / Beam As Vertical Members Including Their Cross Arms Made Up From M.S. Channel ( 75 Mm X 40 Mm X 4.8 Mm Thick ) And Supplying The Following Accessories As Required. A ) Supplying Of Three Piece Nonlinear Resistor Type Lightning Arrestor Suitable For 3 Wire, 11 Kv Overhead Lines With Rated Voltage 9 Kv ( Rms ) With A Nominal Discharge Current Rating Of 5 Ka And Complete With Galvanised Clamping Arrangement, G.I. Bolts, Nuts, Washers Etc. As Required. B ) 11 Kv, 400 Amp. A.B. Switch ( 3 Posts, Vertical Type ) - 1 Set C ) 400 Amps Rated Horn Gap Fuse ( 3 Nos ) - 1 Set D ) Pin Insulator E ) Acsr Wire 140 Supplying Of 3 X 120 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 11 Kv Grade ( E ) Conforming To Is 7098 ( Part-Ii ) As Required. 141 Supplying Of Cable End Termination With Heat Shrinkable Jointing Kit Complete With All Accessories Including Lugs Suitable For Following Size Of Xlpe Aluminium Conductor Cable Of 11 Kv Grade As Required. A ) Outdoor Type For 3 X 120 Sq Mm 142 Supplying Of Cable End Termination With Heat Shrinkable Jointing Kit Complete With All Accessories Including Lugs Suitable For Following Size Of Xlpe Aluminium Conductor Cable Of 11 Kv Grade As Required. B ) Indoor Type For 3 X 120 Sq Mm 143 Supplying Of 3.5 Core 185 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 144 Supplying Of 3.5 Core 150 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 145 Supplying Of 3.5 Core 120 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 146 Supplying Of 3.5 Core 70 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 147 Supplying Of 3.5 Core 50 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 148 Supplying Of 3.5 Core 35 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 149 Supplying Of 3.5 Core 25 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 150 Supplying Of 3 Core 35 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 151 Supplying Of 3 Core 16 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 152 Supplying Of 3 Core 4 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 153 Supplying Of 4 Core 10 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 154 Supplying Of 4 Core 6 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement. 155 Supplying Of 3 Core 2.5 Sq Mm Pvc Insulated & Pvc Sheathed Aluminium / Copper Conductor Unarmoured Submerssiable Flat Power Cable Of 1100 V Grade Conforming To Is 8130 Along With Cable End Termination And Cable Lug ( Copper ) As Per Site Requirement. 156 Supplying Of 3 Core 1.5 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium / Copper Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Copper ) As Per Site Requirement. 157 Supplying Of 4 Core 1.5 Sq Mm Xlpe Insulated & Pvc Sheathed Aluminium / Copper Conductor Armoured U.G. Power Cable Of 1100 V Grade Conforming To Is 7098 ( Part-I ) Along With Cable Gland Double Compression Type And Cable Lug ( Copper ) As Per Site Requirement. 158 Local Push Button Control Station ( Wall / Structure Mounting, Non-Copartmentalizing Type, Constructed With 2 / 1.6Mm Thick Crca Sheet, With Powder Coated Panting Shade : Ral 7035 ) - Start Pb With 2No Contact - 1 No. & Stop Pb With 1No+1Nc Contact - 1 No. & 2.5Sq. Mm. Control Terminal - 6 Nos. 159 Supply Of 6 Dia Gi Pipe ( Medium Isi Mark ) For Cable Protection 160 Earthing Material - 40X6 Mm G.I Earth Flat 161 Earthing Material - 8 Swg G.I Wire 162 Earthing Material - 3 Dia 3Mtr. Gi Pipe With Wire Mesh & Clamp 163 Earthing Material - 600 Mm X 600 Mm X 5 Mm Thick Copper Plate As Per Is 3043 : 1987. 164 Lightning Protection - 45Degree G.I Air Terminal With 25 Mm Gi Pipe As Per Requirement. 165 Lightning Protection - 25X3 Mm G.I Down Conductor 166 Materials For Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Fr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Fr Pvc Insulated Copper Conductor Single Core Cable Etc As Required. 167 Materials For Wiring For Twin Control Light Point With 1.5 Sq.Mm Fr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Fr Pvc Insulated Copper Conductor Single Core Cable Etc As Required. 168 Materials For Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Fr Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Steel Conduit As Required A ) 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire 169 Materials For Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Fr Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Steel Conduit As Required B ) 4 X 1.5 Sq. Mm + 2 X 1.5 Sq. Mm Earth Wire 170 Materials For Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Fr Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Steel Conduit As Required C ) 6 X 1.5 Sq. Mm + 3 X 1.5 Sq. Mm Earth Wire 171 Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 172 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5 / 6 Amps Modular Socket Outlet And 5 / 6 Amps Modular Switch, Connection Etc. As Required. ( For Light Plugs To Be Used In Non Residential Buildings ) . 173 2X20 / 22W Led Batten With Suitable Led Tube Light ( M / S Havells Model Regal Batten Or Cg / Philips / Bajaj / Wipro Make Ss Model ) 174 Supplying 1400 Mm Sweep Ceilling Fan W / O Regulator And With All Other Accessories Suitable For Operation On 220 V 50 Hz Single Phase Ac Supply. ( M / S Havells Make Model No. Pacer / Velocity Or S.S Model Of Bajaj / Crompton / Usha ) . 175 Supplying Of 400Mm Sweep Wall Mounted Exhaust Fan With All Other Accessories Suitable For Operation On 220 V 50 Hz Single Phase Ac Supply ( M / S M / S Havells / Comptron / Bajaj / Usha Make ) 176 Materials For Wiring For Ac / Power Plug With 2X4 Sq. Mm Fr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit Alongwith 1 No 4 Sq. Mm Fr Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 177 Supplying And Fixing 20 Amps, 240 Volts, Spn Industrial Type, Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 Amps C Curve, Sp, Mcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required. 178 Materials For Wiring For 3 Phase Power Plug With 4X4 Sq. Mm Fr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit Alongwith 2 Nos 4 Sq. Mm Fr Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 179 Supplying Of 32 Amps, 415 Volts, Tpn Industrial Type, Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 32 Amps C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required. 180 Supplying Following Size Of Perforated Pre-Painted M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. A ) 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 181 Supplying Following Size Of Perforated Pre-Painted M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. B ) 300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness 182 Supplying Of 165W Led Flood Complete Light Set Of Ip65 And Operating Voltage 140 - 270 V Ac ( Make : Philips ( Cat No. Bvp410 Led 165 Cw He Sy20 Fg S3 Xtfc ) / Cropmton / Bajaj / Equivalent ) 183 Supply Of 9 Litres Capacity Fire Buckets With Inscription Of? Fire? Signal Red Colour I / C Filling Of Sand , P / F Hooks, Clamps Etc Required. ( 1 Set = 3 Nos. ) 184 S / F 4.5 Kg Co2 Type Fire Extinguisher With Suitable Hose Pipe And Hook Etc As Required. ( Isi Marked ) 185 S / L Of 6 Mm Thick Rubber Mat Suitable For Mv / Hv Supply ( Class- B Category ) As Required. ( Isi Marked ) 186 Supply Of 250 Kva Diesel Generating Set With Required Accessories As Per The Detailed Specification In Annexure-A & Annexure-B Along With Necessary Multistrand Armoured Cable ( Approx 40 Mtrs. ) Suitable For Connecting Incoming Supply From Dg Set With Amf And Mcc Panel Along With Exhaust Gas Piping With Necessary Fittings And Accessories As Required 187 Supply Of Amf Panel ( Automatic Main Failure ) For Auto Start / Stop With Required Accessories Suiting To The Above Dg Set Mentioned In Annexure-A & Annexure-B 188 Earthing Material - 18 X 18 X 5 Mm Thick Copper Plate Of Electrolytic Grade As Per Is 3043 189 Earthing Material - 3 Dia 4 Mtr Gi Pipe With Fuunnel & Wire Mesh & Clamp For Earth Pit As Per Is 3043 190 Earthing Material - 50X6 Mm G.I Earth Flat. 191 Cable Protection Pipe - 3 Dia 3 Mtr. Gi Pipe For Protection Of Cables ( Tata / Equivalent ) . 192 Supply Of High Mast Tower ( 25 Mtr. Height ) Suitable For 12 Set Of 200 W Led Flood Light Fittings ( Design Standard I.L.E. Technical Support No. 7:2000, Material Equivalent To Bsen10025, Hot Deep Galvanization To Is: 4759 ) ( Make: Utkarsh / Bajaj ) With Power Feeder Box ( Outdoor Type ) Including Motor Timer & All Electrical And Electronics Materials, Interconnection Suitable For Power Feeder And Operation Of 25 Mtr. High Mast Tower And 12 Set Of 200 W Led Light ( Make: Crompton / Greaves ) 193 Cable 1100V Grade Multistrand Armoured Cable As Per Is: 7098 ( Part 1 ) / 1988 Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement – 3C X 6 Sqmm Al.Xlpe Cable ( Make: Havells ) 194 Cable 1100V Grade Multistrand Armoured Cable As Per Is: 7098 ( Part 1 ) / 1988 Along With Cable Gland Double Compression Type And Cable Lug ( Aluminium ) As Per Site Requirement – 4C X 10 Sqmm Al.Xlpe Cable ( Make: Havells ) 195 Earthing Material – 8 Swg Gi Wire 196 4Mp Ip Camera - 1 / 3# Cmos , H265 & H264 197 4K Ip Fixed Bullet Camera - 1.8 8Mp 198 4K Ip Motorized Bullet Camera 199 2Mp 30X Starlight Ir Ptz Network Camera 200 64 Ch Nvr - Intel Processor 201 64 Ch Nvr For Display In Gourd Room 202 Surveillance Hard Disk 8Tb 203 Led Tv Fhd 49 204 Led Tv Fhd 42 205 4 Port Giga Poe With 2 Uplink Gigalan 206 8 Port Giga Poe With 2 Uplink Sfp Port 207 Armourd Cat 6 Cable 208 1Kva Online Ups With 9Ah Battery 209 Ip 67 Enclosure Outdoor Box 210 Server Rack With Accessorise 211 Armoured 3 Core Cable 1.5 Sqmm 212 Hdpe Pipe 32Mm 213 Fabricated Gi Pole - Cctv 214 Chemical Earthing Pit 50Mm 2Mt. 215 Ethernet Lan Surge Protector Rj-45 216 Supply Of Air Compressor 3Hp 217 Supply Of Car Washer 218 Supply Of Pvc Overhead Tank 219 Supply Of Water Pump And Related Plumbing For Supply Of Water To Overhead Tank From Underground Tank 220 Providing Services Of Borewell Drilling And Supply Of Pump For Borewell. 221 Ph Meter: ( Like Toshniwal / Sisco Or Other Reputed Make ) 222 Water Bath: ( Reputed Make ) 223 Hotplate: ( Reputed Make ) 224 Flash Point Apparatus: ( Abel ) 225 Lab Stirrer: ( Reputed Make ) 226 Constant Rpm Stirrer With Following Attachments ( Reputed Make ) 227 The Procurement, Manufacturing, Testing & Supply Of Pit Less Type Electronic Weighbridge 60T Capacity, As Per Technical Specification Given In Brief Scope Of Work 228 Supply And Commissioning Of Diesel Forklift Truck 3000 Kg Capacity As Per Detail Nspecification Given In Brief Scope Of Work 229 Part - B N ( Installation & Commissioning ) 230 Installation & Commissioning Of Ss Hold Tank For Storage Of An / Cn Melt Of 103 Kl Capacity, Moc: Ss-304 L ( Bottom 8 Mm, Shell 6 Mm And Top 5 Mm Thick ) , Size - 4500 Mm Dia X 6750 Mm Height, Tank Will Be Vertical, Cylindrical Flat Bottom & Conical Self-Supported Roof With Proper Sand Leveling, Grouting Along With Electrical Work And Piping Work With Necessary Fittings, Accessories. The Specifications And Requirement Of The Hold Tank And Accessories Will Be As Per The Details Mentioned In Brief Scope Of Work. 231 I&C Of Electrical Work – Laying Of Cable And Electrical Fixtures 232 I&C Of Ss Piping Of 2 Dia Long With Necessary Bends And Fittings For Process Piping With Heat Tracing And Insulation 233 I&C Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Suitable For Ss Piping & Flexible Chemical Hose 234 I&C Of Ss304 Flanges 50 Nb Size For Process Piping 235 I&C Of Ss304 Valves 50 Nb Size For Process Piping 236 I&C Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From One Point To Hold Tanks 237 I&C Of 50Nb Valves For Steam Piping 238 I&C Con. Reducer 50 X 40 Nb, Ss-304L, #150 239 I&C Of Float Type 25 Nb Steam Traps 240 Installation Of 80 Kl Storage Tank For Oxidizer Phase ( Op ) Of 4500 Mm Dia X 5000 Mm Straight Height. Material Of Construction - Ss304, Plate Thickness - Shell 6 Mm, Top Cover 5 Mm And Bottom Plate 8 Mm. Vertical, Cylindrical, Flat Bottom, Conical Flanged Top With Supports Welded With 75X75 X8 Mm Angle Ring, The Tank Will Be Complete With 125 Mtrs, 40 Nb Sch 40Spiral Ss304 Coil, In Two Parts For Necessary Steam Heating. It Will Also Be Completed With All Necessary Nozzle, Drain, Vent, Support Lugs, Heat Exchangers, Insulated, Liquid Level Transmitter Having Lcd Display And Suitable Ms Ladder With Railing At The Top And Sampling Point Having An Arrangement Of Two Valves For Drawl Of One Liter Of Sample. 241 I&C Of Electrical Work – Laying Of Cable And Electrical Fixtures 242 I&C Of Ss Piping Of 2 Dia Long With Necessary Bends And Fittings For Process Piping With Heat Tracing And Insulation 243 I&C Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Suitable For Ss Piping & Flexible Chemical Hose 244 I&C Of Ss304 Flanges 50 Nb Size For Process Piping 245 I&C Of Ss304 Valves 50 Nb Size For Process Piping 246 I&C Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From One Point To Hold Tanks 247 I&C Of 50Nb Valves For Steam Piping 248 I&C Con. Reducer 50 X 40 Nb, Ss-304L, #150 249 I&C Of Float Type 25 Nb Steam Traps 250 Installation & Commissioning Of 24 Kl Storage & Blending Tank For Oxidizer Phase ( Op ) Of Id Of Tank: 3580Mm, Tank Wall Thickness 6Mm Plus 50Mm Space For Insulation Material All Around The Tank, Thus Total Od Of Tank Shall Be Approx. 3692Mm X Height Of Tank Wall: 2600Mm, Plus Channel Support Of 200Mm At The Tank Base & Top, Thus Total Height Of Tank From Floor Level Shall Be 3000Mm Straight Height. Tank Material Of Construction - Ss304, Plate Thickness - Shell 6 Mm, Flanged Flat Top 4 Mm, Flat Bottom 8 Mm With Ms Channel Support, The Blend Tank Will Be Vertical, Cylindrical, Flat Bottom, Flat Flanged Top, Complete With 90 M, 40 Nb Sch 40 Spiral Ss304 Coil In Two Parts, 90 Mm Dia Shaft Along With 02 Numbers Of Pitch Blade Top Entry Turbine Agitator At Different Depth, 65-70 Rpm With Supports, All Necessary Nozzle, Drain, Vent, Support Lugs And Ms Platform With Railing And Suitable Ladder And 20 Hp, Ip 55, Tefc Motor With Suitable Electrical Power Switch, Gear Box Along With Insulation Of Tank By 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg. Height Of Manhole Collar To Be Max 200 Mm So That It Is Within The Height Of Channel Support At The Top Of Tank And It Does Not Interfere During Placement Of Tank. Manhole Size Required Minimum 600 Mm Id At The Top Of Tank For Feeding Of An & Cleaning Of Tank. Providing Feed Hopper To Be Fitted On Manhole Having Square Shape ( Approx. 1M X1m ) At Top And With Bottom Dia Equivalent To Manhole Dia With Fixing Arrangement With Nut & Bolts Of Ss Is Required For All Tanks. 251 Installation & Commissioning Of Ss304 Flanges 50Nb For Above Process Piping 252 Installation & Commissioning Of Ss304 Valves 50 Nb Size For Above Process Piping 253 Installation & Commissioning Of Electrical Work – Laying Of Cable - Approx. 3Ø Power Supply To Electrical Fixtures Attached To Blend Tanks, Pumps And Boilers 254 Installation & Commissioning Of Flexible Chemical Hose For Oxidizer Phase Unloading And Transfer Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 255 Installation & Commissioning Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Flexible Chemical Hose - Of Bj Corporation Make Or Equivalent 256 Installation & Commissioning Of Insulated Steam Transfer Piping Of 40Nb Ms Pipe With Flanges And Pipe Fittings Form Supply Line To The Proposed Blend Tanks 257 Installation & Commissioning Of Insulated Steam Transfer Piping Of 25Nb Ms Ibr Seamless Pipe With Flanges And Pipe Fittings For Recovery Of Condensates 258 Installation & Commissioning Of 40Nb Valves For Steam Piping 259 Installation & Commissioning Of 25Nb Valves For Steam Piping 260 Installation & Commissioning Of Float Type 25 Nb Steam Traps 261 Installation & Commissioning Of Storage Tank ( Moc-Ms ) Of 40 Kl Capacity With Additional Provision For 5% Air Space , Moc-Is 2062, Size-3600 Mm Dia X 4000 St. Ht. . The Tank Will Be Vertical, Cylindrical, Flat Bottom And Conical Top To Be Fabricated From Is 2062 Quality Plates. Shell & Top Will Be From 6 Mm Thk Plates And Bottom Will Be 8 Mm Thick. Complete With Steam Heating Coil Of Approx. 80 Mtrs. Of 25 Nb Sch 10 Ms Pipe Coil. The Tank Will Be Completed With Necessary Drain, Vent Etc. The Tank Will Be Insulated By 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg Along With Suitable Ladder & Railing With Ms Structure With Anticorrosive Paint Along With Walkway Over The Tanks By Gratings / Chequered Plate. Walkway Of Both Tanks Will Be Interconnected. 2 Nos. Lightning Arrester With 2 Nos. Earth Pit And Suitable Foundation. I&C Of Motor Starter Panel / Box And Cable Laying Underground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Or On Cable Tray As Per Side Condition Including End Termination With Necessary Glands And Lugs For The Items Mentioned In Part-A Item No. 140 And 141. 262 Installation & Commissioning Of Oil Pipe - 80 Nb Dia, Ms Pipe Along With Necessary Valves And Fitting And Strainers For Unloading Of Furnace Oil Tankers Along With Necessary Supports, Hooks And Grouting Etc 263 Installation & Commissioning Of Gear Pump Of Capacity 300 Lpm With Flame Proof Motor With Suction And Discharge Port Of 2 Along With Base Frame And Suitable Foundation For The Pump 264 Installation & Commissioning Of Oil Pipe- 2 Dia, Ms Along With 04 Nos. Valves And Fitting With Heat Tracing And Insulation Along With Necessary Supports, Hooks And Grouting Etc 265 Installation & Commissioning Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings Along With Necessary Supports, Hooks And Grouting Etc 266 Installation & Commissioning Of 50Nb Valves For Steam Piping 267 Installation & Commissioning Of Insulated Steam Transfer Piping Of 25Nb Ms Pipe With Flanges And Pipe Fittings For Condensate Along With Necessary Supports, Hooks And Grouting And Underground Laying Etc 268 Installation & Commissioning Of 25Nb Valves For Steam Piping 269 Installation & Commissioning Of Float Type 25 Nb Steam Traps 270 Installation & Commissioning Of Fuel Phase ( Fp ) Blend Tank, 2.5 Kl Capacity, 1350 Mm Dia X 1800 Mm Height, Material Of Construction - Is 2062, Plate Thickness - Shell And Top 5 Mm, Bottom Dish 6 Mm, The Blend Tank Will Be Vertical, Cylindrical, Dished Bottom, Flat Flanged Top, Complete With 20 M, 25 Nb Sch 40 Spiral Coil, 50 Mm Dia Shaft Along With Pitch Blade Turbine Agitator, With All Necessary Nozzle Drain, Vent, Support Legs & Ladder And 2 Hp Tefc, Ip 55 Motor And Suitable Gear Box For Driving Turbine Agitator And Load Cell With Least Count Of 1 Kg And Max Net Weight Carrying Capacity Of 3000 Kg. Installation & Commissioning Of Temperature Controller With Suitable Arrangement To Maintain Temperature Of Fuel Phase In The Range Of 40-60° C. 271 Installation & Commissioning Of Basket Strainer For Oxidiser Phase , 75 Ltrs Capacity, Make Of Construction - Vessel Ss 304 And Jacket Is 2062, Vessel Shell 5 Mm, Bottom Dish 6 Mm, Top Plate 6 Mm, Jacket Shell 5 Mm, Dish 6 Mm, The Strainer Will Be Vertical, Cylindrical, Dished Bottom, Flat Flanged Top Jacketed Vessel Complete With Perforated Strainer With 18 Mesh Ss Filter Cloth, Inlet / Outlet Nozzle, Drain Etc. 272 Installation & Commissioning Of Basket Strainer For Fuel Phase - 50 Ltrs Capacity, Material Of Construction Ss 304, Plate Thickness - Vessel Shell 5 Mm, Bottom Dish 6 Mm, Top Plate 6 Mm, Jacket Shell 5 Mm, Dish 6 Mm, The Strainer Will Be Vertical, Cylindrical, Dish Bottom, Flat Flanged Top, Jacketed Vessel Complete With Perforated Strainer With 18Mesh Ss Filter Cloth, Inlet / Outlet Nozzle, Drain Etc. 273 Installation & Commissioning Of Screw Pump, Rmab 601 Of Make Roto Pumps Ltd Or Any Other Suitable Better Make For Transferring Oxidizer Phase To Blender And 7.5 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate Along With Suitable Foundation For The Pump 274 Installation & Commissioning Of Screw Pump, Rdaa 492 Of Make Roto Pumps Ltd Or Any Other Suitable Better Make / Gear Pump For Transferring Fuel Phase To Blender And 2.0 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate Along With Suitable Foundation For The Pump 275 Installation & Commissioning Of Emulsion Blender Of 150 Kg / Min Capacity, 208 Mm O / D X 458 Mm Long, Material Of Construction - Body Of Aluminium 8 Mm, Rod 9.5 Mm, Rotating Shaft Ss 410, 28.5 Mm Dia, Blades Ss 410, 5 Mm Thick, Blender Will Be Horizontal Cylindrical Complete With Series Of Pin And Rotating Shaft Complete With Shear Blades, End Bearing With Seals And 25 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling Base Plate 276 Installation & Commissioning Of Control Panel Comprising Of Variable Frequency Drive ( Vfd ) Panel Consisting Of Danfoss Or Equivalent Make Frequency Converter Suitable For Three Phase 415 Volts Motor Of Following Capacity A ) 7.5 Hp , B ) 2.0 Hp, C ) 25 Hp, D ) 7.5 Hp Along With Rpm Indicators 277 Installation & Commissioning Of Inline Magnetic Flow Meter / Mass Flow Meter For Ob Ss 304, Range 60 - 150 Lpm Of Ie Or Equivalent Make. 278 Installation & Commissioning Of Inline Magnetic Flow Meter / Mass Flow Meter For Fp Ss 304 Range 5 - 20 Lpm Of Ie Or Equivalent Make 279 Installation & Commissioning Of Screw Pump- Wmaa 602 Of Roto Pumps Ltd Or Any Other Suitable Better Make For Transfer Of Emulsion Matrix From Product Pump To Silo And 7.5 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate Along With Suitable Foundation For The Pump 280 Installation & Commissioning Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 281 Installation & Commissioning Of Flexible Chemical Hose For Oxidizer Phase Unloading And Transfer Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 282 Installation & Commissioning Of Furnace Oil / Hsd Unloading And Transfer Line With Suction Line Of 50 Nb & Delivery Line Of 40 Nb, Sch 10, Material Of Construction Ms As Per Site Requirement Along With Necessary Supports, Hooks And Grouting Etc 283 Installation & Commissioning Of Oxidizer Phase -Filter - Screw Pump - Flow Meter Line With Suction Line 65 Nb & Delivery Line Of 50 Nb, Sch 10, Material Of Construction Ss 304 As Per Site Requirement Along With Necessary Supports, Hooks And Grouting Etc 284 Installation & Commissioning Of Flexible Chemical Hose For Oxidizer Phase - Flow Meter - Blender Line - 50 Mm Id, Is:7654 Type1 With Quick Release End Fittings Of Bj Or Any Other Suitable Better Make 285 Installation & Commissioning Of Fuel Phase ( Fp ) - Filter - Pump - Flow Meter Line With Suction Line 50 Nb & Delivery Line 25 Nb, Moc Ss 304 Along With Necessary Supports, Hooks And Grouting Etc 286 Installation & Commissioning Of Fuel Phase - Flow Meter - Blender - 1.0 Inch Flexible Hose Of Gates Make Or Equivalent With Both Ends Fitted With Quick Coupler Of Bj Or Any Other Suitable Better Make Along With Necessary Supports, Hooks And Grouting Etc 287 Installation & Commissioning Of Emulsion Matrix Transfer Line From Blender To Silo - 65 Nb Sch 10 Ss 304 Along With Necessary Supports, Hooks And Grouting Etc 288 Installation & Commissioning Of Quick Release Coupling Set ( Male And Female ) For Fixing 50 Mm Id Transfer Hoses With Blend Tank Outlet - Of Bj Corporation Make Or Equivalent 289 Installation & Commissioning Of Ss 304 Three Way Ball Valve 65 Mm Between Emulsion Matrix Transfer Line From Blender To Silo 290 Installation & Commissioning Of Gear Pump Of Capacity 300 Lpm With Flame Proof Motor With Suction And Discharge Port Of 2 Along With Base Frame And Suitable Foundation For The Pump 291 Installation & Commissioning Of Silo For Storage Of Emulsion Matrix Of 24 Kl ( 30T ) Capacity, Moc-Is 2062, Size-3000 Mm Dia X 3000 Mm Height X 750 Mm Conical Height, Silo Will Be Vertical, Cylindrical, Conical Bottom And Top Complete With All Necessary Nozzle, Vent, Support Bracket, With Suitable Platform With Ladder To Access The Various Inlets / Outlets At The Top Of The Silo Along With Insulation Of 50 Mm Thick Glass Wool Pad, Chicken Mesh And Cladding With Aluminium Sheet Of 22 Swg And Concrete Foundation 292 Installation & Commissioning Of Digital Load Cells ( Mettler Toledo Make ) For Silo 293 Installation & Commissioning Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 294 Installation & Commissioning Of 2.5 Inch Id Flexible Hose Of Gates Make Or Equivalent With Both Ends Fitted With Quick Coupler Of Bj Make 295 Installation & Commissioning Of Emulsion Matrix Transfer Line From Hopper Of Screw Pump To Pump Trucks And Emulsion Tanker To Silo - 65 Nb Sch 10 Ss 304. 296 Installation & Commissioning Of Ss 304 Flanges For Above Process Piping 297 Installation & Commissioning Of Ss 304 Valves For Above Process Piping 298 Installation & Commissioning Of Quick Release Coupling Set ( Male And Female ) For 50 Mm Id Flexible Chemical Hose - Of Bj Corporation Make Or Equivalent Along With Suitable 1 No. Dust Cap 299 Installation & Commissioning Of Control Panel Along With Safety Device Units ( High Pressure, Low Pressure Switches, High Temperature Cut-Off Switch & Pressure Gauge, Rupture Disc ) For Emulsion Transfer Pump 300 Installation & Commissioning Of Rotary Gear Pump With Impeller Nitrile Rubber With Electric Motor And Suitable Gear Box Make: Napco Or Equivalent Capacity :3’’ -400 Lpm, Discharge :10 Bar 301 Installation & Commissioning Of Single Roll Crusher Of Capacity 15-16 Mt / Hr For Crushing High Density Ammonium Nitrate Lumps ( Bag Size ) 750 Mm X 500 Mm X 250 Mm With Opening Of The Crusher 900 Mm ( Approx ) X 550 Mm ( Approx ) And Output Size 40 Mm Approx Along With Suitable Drive And Motor And Starting Panel And Supply Cable And Necessary Safety Features Including Providing Of Suitable Civil & Structural Foundation And Suitable Placement Of Tail End Of The Conveyor And Support System Along With Charge Hopper Above The Crusher Opening And Platform For Keeping Pallets Of Hdan And Space For Manual Charging Of Bags In To Crusher As Per The Details Mentioned In Brief Scope Of Work. 302 Installation & Commissioning Of High Density Ammonium Nitrate Conveying System Through A Belt Conveyor Of Width 800-1000 Mm & Cd Of Approx 35-40 M Along With Skirting Arrangement On Both Edges Of The Conveyor And Suitable Drive, Motor, Starting Panel And Supply Cable And Necessary Safety Features Along With 4 Nos. Discharge Points / Ploughs For Feeding 4 Nos. Blend Tanks Falling In The Discharge Zone Of Around 25M. ( The Tanks Are Of Dia 3692 Mm-Od With A Centre To Centre Gap Of 5000 Mm Between The Tanks ) With Total Lift Requirement Of Around 3M From Tail End To Discharge Zone Including Providing Of Suitable Civil & Structural Foundation For Supporting The Conveyor System Along With Side Walk Ways As Per The Details Mentioned In Brief Scope Of Work. 303 Installation And Commissioning Of Fo Fired Boiler Unit Rxd-850 ( 850 Kg / Hr ) Working Pressure Of 10.54 Kg / Cm2 With Economizer Of Thermax Make Only Along With Necessary Electrical Items Supply And Installation 304 Installation And Commissioning Of Softner Ez30 Of Thermax Make Only 305 Installation And Commissioning Of Filter Ez40 Fdm Of Thermax Make Only 306 Installation And Commissioning Of Oxidation Chamber- E Z200c Of Thermax Make Only 307 Installation And Commissioning Of Mild Steel Chimney ( Self Supported ) Of 300 Mm Top Diameter And 18 Mtrs Height ( Approx ) Along With Flue Gas Duct With Supporting Nstructure, Sampling Collection Point, Platform For Collection & Spiral Ladder Up Nto Collection Point And Ladder From Collection Point To Top - To Cater 2 Nos Of 850 Kg / Hr Boilers Including Appropriate Civil Foundation For The Chimney To Withstand The Load And Necessary Supports Including Duct Piping From Boilers To Chimney, Lightning Arrester And Light Indicator Over Chimney With 2 Nos. Earth Pit And Suitable Foundation 308 Installation And Commissioning Of Pressure Reducing Station, Range- In Let Pressure 10.54 Kg / Cm2, Out Let Pressure 3.5 Kg / Cm2 Max, Steam Flow-Max. 3000 Kg / Hr, Body-C.S, Inlet Size-80Mm, Outlet-100Mm With Cast Steel Valve Prv Size 50Mm Flange Class Asa 150 As Per Site Requirement Along With Necessary Supports, Hooks & Grouting Etc 309 Installation And Commissioning Of Ms Day Tank For Fo - 3 Kl Capacity ( Round Tank With 5 Mm Plate ) With Level Indicator, 2 Nos Of 6Kw Heaters Along With Temp. Controller And Cut Off Switch, Necessary Electrical Supply & Connection Along With Ms Piping From Day Tank To Boilers Along With Necessary Ms Overhead Platform With Foundation Of Suitable Size And Height With Ladder As Necessary For Housing Of Fo Tank As Per Site Requirement 310 Installation And Commissioning Of 4 Nos Of Hdpe Day Tanks For Soft Water Of 3 Kl Capacity Each, Along With Ms Piping From Day Tank To Boilers Along With Necessary Ms Overhead Platform With Foundation Of Suitable Size And Height With Ladder As Necessary For Housing Of Hdpe Tank As Per Site Requirement 311 Installation And Commissioning Of Insulated Steam Header Piping 6 Ms Ibr Seamless Pipe Thickness 8Mm With Air Vent, Pressure Relief, Safety Valve, Pressure Gauge And Draining Of Steam Condensate Through Steam Trap, 2 Nos Outlet For 2 Nos Prs With Provision Of Suitable Length With Flanges And Pipe Fittings Along With Nrv 4 Nos In Between Boiler Output And Steam Header With Necessary Bend And Fittings For Catering Steam Output From 4 Nos Boilers 850 Kg / Hr Each And 3 Nos More Points For Future Expansion In Same Header ( With A Provision For Up Gradation To 6000 Kg / Hr ) 312 Installation And Commissioning Of Steam Transfer Piping Of 50 Nb Ms Ibr Seamless Pipe With Insulation And With Necessary Flanges And Pipe Fittings From Boiler Outlet / Steam Header To Prs To Blend Tanks Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 313 Installation And Commissioning Of Insulated Steam Transfer Piping Of 80Nb Ms Pipe With Flanges And Pipe Fittings For Recovery Of Condensate From Blend Tanks To Condensate Recovery Tank Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 314 Installation And Commissioning Of Insulated Steam Transfer Piping Of 25Nb Ms Pipe With Flanges And Pipe Fittings For Steam Supply / Condensate Collection Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 315 Installation And Commissioning Of 50Nb Valves For Steam Piping 316 Installation And Commissioning Of 25Nb Valves For Steam Piping 317 Installation And Commissioning Of Float Type 25 Nb Steam Traps 318 Installation And Commissioning Of Water Line - 2 Dia, Gi, Class B Along With Necessary Valves And Fittings As Per Site Requirement Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 319 Installation And Commissioning Of Water Line - 1 Dia, Gi, Class B Along With Necessary Valves And Fittings As Per Site Requirement Along With Necessary Supports, Hooks And Grouting Overhead / Underground Laying Etc 320 Installation And Commissioning Of Furnace Oil - 1.5 Dia, Ms Along With Necessary Valves, And Fitting With Heat Tracing And Insulation Along With Necessary Support Post And Structure To Run Overhead / Arrangement To Run Underground 321 Installation And Commissioning Of Furnace Oil - 1 Dia, Ms Along With Necessary Valves, And Fitting With Heat Tracing And Insulation Along With Necessary Support Post And Structure To Run Overhead / Arrangement To Run Underground 322 Installation And Commissioning Of Monoblock Pump 2Hp, Connection Size 2 For Delivery Up To Height Approx 40 Feet - Reputed Make Like Kirloskar / Ksb Or Equivalent 323 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through “A” Or “B” Class Electrical Competency Holder Or From Concerned Authority As Applicable, From Concerned Authorities ( If Applicable ) ( Applicable Statutory Fees Shall Be Payable By Iocl ) And Installation & Commissioning Of Items Mentioned At Sl. No. 1.195 Of Part-A With Necessary Support Base And Structures Etc 324 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Above 35 Sq. Mm And Upto 185 Sq. Mm. Sl. No. 1.196 325 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Upto 35 Sq. Mm. Sl. No. 1.197 & 1.198 326 Installation, Testing & Commissioning Of Diesel Operated Pump Set Complete In All Respect I.E. Comprising Pump, Motor Of 1450 Rpm, Pin Bush Type Coupling, Coupling Guard, Common Base Frame, Cushy Foot Mounting, And Foundation. Na ) Fire Pump Of Capacity 2280 Lpm – ( 137 M3 / Hr ) ( Make-Kirloskar / Ksb / Greaves ) 327 Installation, Testing & Commissioning Of Pump Set Complete In All Respect I.E. Comprising Pump, Motor Of 1450 Rpm, Pin Bush Type Coupling, Coupling Guard, Common Base Frame, Cushy Foot Mounting, And Foundation. Nb ) Jockey Pump Of Capacity 180 Lpm. ( Make-Kirloskar / Ksb / Greaves ) 328 Installation & Commissioning Of Pressure Switch With Guide Valve And Pressure Damper Including Necessary Fitting. 329 Installation & Commissioning Of Combined Starting Panel For Above Four Nos. Pump Set, With Star-Delta Type Starter For Fire Pump & D.O.L. Type Starter For Jockey Pump. 330 Installation & Commissioning Of Pressure Gauge ( 100Mm Dia & 0 To 15 Kg / Sq.Cm ) With Guide Valve And Pressure Damper Including Necessary Fittings. 331 Installation & Commissioning Of Single Headed Oblique Type Hydrant Valve ( Alloy Steel ) As Per Is: 5290 With Pvc Blank Cap. 332 Installation & Commissioning Of 63Mm X 15 Mtr. Long Hose As Per Is: 8423, Bounded With Pair Of Steel Coupling As Per Is: 903. 333 Installation & Commissioning Of Front Glassed Single Door Powder Coated M.S. Hose Box ( 16 X 18 Swg ) Of Standard Design To Accommodate One Branch Pipe With Nozzle And 2 Lengths Of 63Mm X 15 Mtr. Long Hose. 334 Installation & Commissioning Of C.I. Flanged Gate Valve As Per Is: 14846, Pn 1.6 Of 100Mm Nb 335 Installation & Commissioning Of C.I. Flanged Non Return Valve As Per Is: 5312, Pn 1.6 Of 100Mm Nb 336 Installation & Commissioning Of Aboveground / Underground M.S. Piping Conforming To Is: 1239 / 3589 With Fitting, Support, Clamp And Treatment On Outer Surface By One Coat Of Primer & Two Coats Of Synthetic Enamel Red Paint For 100Mm Nb, M.S., Medium ( Schedule 40 ) 337 Installation & Commissioning Of Mono Block Pump Including Base Frame And Protection Shed, Gi Pipe, Earth Pit Etc. 338 Construction Of Shed Consisting Iron Channel Fitted Iron Profile Sheet Size: 4 Mtr X 2.5 Mtr. Including Rcc Foundation Of Pump Base 339 I&C Of 300 Ltr. Ss Kettle With Agitator With 2 Way Ball Valve 40 Nb- 2Nos, 2 Way Ball Valve 25 Nb- 2Nos 340 I&C Of Screw Pump, Rdaa 492 Of Make Roto Pumps Ltd Or Suitable Centrifugal Pump For Transferring Kettel To Tank And 2.0 Hp Tefc, Ip 55 Motor With Suitable Gear Box And Coupling And Base Plate. 341 I&C Of 25 Nb Pipe, Moc Ss 304 Necessary Nozzel, Bend , Valve Etc 342 I&C Of Hdpe Day Tanks Of 3 Kl Capacity 343 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through A Or B Class Electrical Competency Holder, From Concerned Authorities ( Applicable Statutory Fees Shall Be Payable By Iocl ) Installation & Commissioning Of Items Mentioned At Sl. No. 1.220 To 1.236 Of Part-A ( Boq1 ) With Necessary Support Base And Structures Etc 344 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through A Class Electrical Competency Holder, From Concerned Authorities ( Applicable Statutory Fees Shall Be Payable By Iocl ) Installation & Commissioning Of Items Mentioned At Sl. No. 1.237 Of Part-A ( Boq1 ) With Necessary Support Base And Structures Etc 345 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Upto 35 Sq. Mm 346 Laying Of One Number Additional Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Upto 35 Sq. Mm 347 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Above 35 Sq. Mm And Upto 185 Sq. Mm 348 Laying Of One Number Additional Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Above 35 Sq. Mm And Upto 185 Sq. Mm 349 Laying And Connection Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering And Refilling The Trench Etc As Required Including End Termination With Necessary Glands And Lugs On Cable Tray / In The Existing Masonry Open Duct / On Wall Surface As Required. A ) Upto 185 Sq. Mm 350 Installation & Commissioning Of Items Mentioned At Sl. No. 1.258 To 1.263 Of Part-A ( Boq1 ) And Testing & Commissioning Of Earth Pit Complete In All Respects Like Earthing Plate, Gi Pipe, Aluminium Strip, Charcoal & Salt Etc And Laying & Connections Of Earth Flat / Gi Wire And Lightning Protection And Fixing Of Lighting Poles And Connections Testing Etc. 351 Installation & Commissioning Of Items Mentioned At Sl. No. 1.264 To 1.277 And 1.280 Of Part-A ( Boq1 ) All Wiring For Light & Sockets Including Necessary Civil Modification And Grouting Etc. 352 Installation & Commissioning Of Items Mentioned At Sl. No. 1.278 And 1.279 Of Part-A ( Boq1 ) Ms Cable Tray Including Necessary Civil Foundation, Grouting And Welding With Iron Angle Supports. 353 Erection, Testing & Commissioning Of Outdoor, Silent Type 250 Kva Diesel Generating Set As Per Technical Specification Of Oem Or Manufacturer Of Dg Set Along With Amf And Exhaust Gas Piping With Necessary Fittings And Accessories As Required And Installation Of Suitable Cable ( Approx 40 Mtrs. ) For Connecting Incoming Supply From Dg Set With Amf And Mcc Panel Including Arrangement Of Load Testing ( Diesel Required For Load Testing Will Be Supplied By Iocl ) 354 Civil Works For Construction Of Base Platform For Housing The Dg Set Outdoor Nearby The Main Mcc Panel Room 355 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through A Or B Class Electrical Competency Holder As Applicable, From Concerned Authorities ( Applicable Statutory Fees Shall Be Payable By Iocl ) And Installation & Commissioning Of Items Mentioned At Sl. No. 1.286 To 1.289 Of Part-A ( Boq1 ) Along With Lying Of Cables By Making Suitable Trenches / Through Piping At Road Crossing / Critical Areas For Underground Cable Laying And Cable Connections With Necessary Glands And Lugs And End Connections To Synchronize The Dg Supply With Mcc Panel And Making Of Earth Pits ( 4 Nos. As Mentioned In Boq1 ) Complete In All Respects Like Earthing Plate, Gi Pipe, Gi Strip, Charcoal & Salt Etc Including Earth Pit Resistance Testing & Certification And Lying & Connections Of Earth Flat / Gi Wire Etc. 356 Preparation, Approval Of Necessary Drawings / Layout Plans & Liaison For Obtaining Statutory Permissions, Through A Or B Class Electrical Competency Holder As Applicable, From Concerned Authorities ( Applicable Statutory Fees Shall Be Payable By Iocl ) Installation & Commissioning Of Items Mentioned At Sl. No. 1.290 To 1.293 Of Part-A ( Boq1 ) Along With Construction Of Civil Foundation & Grouting For High Mast Tower. 357 I&C Of All Cctv Items I.E. Sl. No. 1.294 To 1.313 358 I&C Of Misc Items Mentioned In Sl. No. 1.314 To 1.318 359 I&C Of All Lab Equipments Mentioned In Sl. No. 1.319 To 1.324 360 Installation & Commissioning And Stamping Charges Of Pit Less Type Electronic Weighbridge 60T Capacity, As Per Technical Specification Given In Brief Scope Of Work 361 Construction Of Civil Foundation And Ramp For 60 Mt Weigh Bridge
Contract Date: Nov 11, 2021 Contract Value : ₹ 8.47 Crore
Boards / Undertakings / PSU No of Bidders 5
Maharashtra View Result →
TenderDetail
Loading tenders