View Bid Results For Load Monitoring Tenders

We found 726 Bid Results related to load monitoring tenders. You can find Contractor details who won load monitoring tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–15 of 726 tenders matching your filters

Educational and Research Institute #11483466 AOC

Arc For Electrical Protective Devices , Electrical Protective Devices( L & T / Legrand / Indoasian) , Mcb Single Pole , A) 1 A , B) 2A , C) 3A , D) 6A , E) 10 A , F) 16 A , G) 20A , H) 25 A , I) 32A , J) 40A , K) 63A , Mcbdouble Pole , A) 1 A , B) 2A , C) 3A , D) 6A , E) 10 A , F) 16 A , G) 20A , H) 25 A , I) 32A , J) 40A , K) 63A , Mcb Tpn – , A) 10 Amp , B) 16 Amp , C) 20 Amp , D) 25 Amp , E) 32 Amp , F) 40 Amp , G) 63 Amp , Mcb Triple Pole Three Phase , A) 10 Amp , B) 16 Amp , C) 20 Amp , D) 25 Amp , E) 32 Amp , F) 40 Amp , G) 63 Amp , Mcb Single Pole Iron Box(Mds/L&T/Indo Asian/Havel’S/Siemens/Legrand) , Mcb D.P. Iron Box (Mds/L&T/Indo Asian/Havel’S/ Siemens/Legrand)) , Mcb Tp Iron Box , Mcb Four Pole Iron Box , Mcb 6 Way Box (Mds/L&T/Indo Asian) , Mcb 8 Way Box (Mds/L&T/Indo Asian) , Mcb 12 Way Box (Mds/L&T/Indo Asian/ Siemns) , Mcb Tpn Db 12 Way Box (Mds/L&T/Indo Asian) , Icdp Main Switch 16 Amp. Fuse Type , Icdp Main Switch 32 Amp. Fuse Type , Ictp Main Switch 32 Amp. Fuse Type , Ictp Main Switch 63 Amp. Fuse Type , Ictp Main Switch 100 Amp. Fuse Type , Ictp Main Switch 200 Amp. Fuse Type , Kit-Kat 15 Amp. 250 Volt , Kit-Kat 30 Amp. 440 Volt , Kit-Kat 63 Amp. 440 Volt , Kit-Kat 100 Amp. 440 Volt , Kit-Kat 200 Amp. 440 Volt , Motor Protection Circuit Breaker . As Per Is/Iec :60947-4-1 (L&T/Indo Asian/Siemens/Legrand) , A) 0.4 To 0.63 Amp , B) 0.63 To 1.6 Amp , C) 1.6 To 2.5 Amp , D) 2.5 To 4 Amp , E) 4 To 6 Amp , F) 5.5 To 8 Amp , G) 7 To 10 Amp , H) 10 To 13 Amp , I) 13 To 18 Amp , 1) Star Delta Starter 10 H.P. (L&T/ Siemens) , 2) Dol Starter(0.5 Hp To 5Hp) , 3) 4 Pole Contactors 16 Amp , 4) 4 Pole Contactor25 Amp , 5) 4 Pole Contactor 40 Amp , 6) 4 Pole Contactor 95 Amp , 7) 4 Pole Contactor 125 Amp , 8) Contactors For 10 Hp Motors (Mk) , 9) On Delay Timer (Eletx) , 10) Off Delay Timer (Eletx) , 11) Timer (3-10 Sec) , A) C - Channel For Mountingmcb & Contactor Within Panel , B) D – Rail Channel For Mounting Mcb, Mpcb & Contactors, Relay Within Panel. , Hrc Fuse , A) 4A , B) 6 A , C) 10 A , D) 16 A , E) 20 A , F) 25 A , G) 32 A , H) 40 A , I) 63 A , J) 100 A , K) 200 A , M) 400 A , Fuse Wires , A) 5 A; , B) 10 A; , C) 16 A; , D) 25 A; , E) 32 A; , F) 63 A; , Over Load Relay As Per Is/ Iec : 60947-4-1( L& T, Siemens, Legrand, Indoasian) , A) 0.4 To 0.63 Amp , B) 0.63 To 1.6 Amp , C) 1.6 To 2.5 Amp , D) 2.5 To 4 Amp , E) 4 To 6 Amp , F) 5.5 To 8 Amp , G) 7 To 10 Amp , H) 10 To 13 Amp , I) 13 To 18 Amp , Mccb Four Pole( L& T, Siemens, Legrand, Indoasian) , A) 32 Amp , B) 40 Amp , C)63 Amp , D) 100Amp , E) 125Amp , F) 200 Amp , G) 250 Amp , H) 400 Amp , Elcb ( L& T, Siemens, Legrand, Indoasian) , A) Dp 16 Amp , B) Dp 25 Amp , C) Dp 40 Amp , D) Fp 16 Amp , E) Fp 25 Amp , F) Fp 40 Amp , G) Fp 63 Amp , H) Fp 125 Amp , Rccb Conforms To Is : 12640 & Iec 61008-1,Degree Of Protection : Ip 20,Sensitivity Rating : 30Ma / 100Ma / 300Ma Short Circuit With Stand Capacity Of 10Ka With Scpdon-Off Indication,Test Button T Is Provided For Periodic Check Up , A) Dp 25 Amp , B) Dp 40 Amp , C) Dp 63 Amp , D) Fp 25 Amp , E) Fp 40 Amp , F) Fp 63 Amp , Switch Fuse Unitthree Phase, Hrc Type (L & T, Indoasian, Siemns) , A) 125 Amp , B) 200 Amp , C) 400 Amp , Level Cotroller (L & T, Siemens, Gic, ) , A) For Single Tanks Control , B) For Two Tanks Control , Level Sensing Probes (Ss) , Level Monitoring Switches , Floating Switch With Two Contacts (No+ Nc) , Magnetic Level Sensing Probe , Electronic Timer Chrono (Radix, Gic, Siemens, Schnider) , Electronic Timer Astrological (Radix, Gic, Siemens, Schnider) , Vertical Tpndb With Provision For Mccb Upto 125 Aas Incomer (Indoasian /Havells/Siemens) , A) 4 Way , B) 6 Way , C) 8 Way , Earthing Plate , 1) Copper 300X300x3 , 2) Copper 600X600x3 , 3) G.I. Plate 600X600 , 4)G.I. Bare Conductor , 5)Copper Bare Conductor (10Swg) , 6)G.I. Strip , 7)Copper Strip

Contract Date: Jul 01, 2026 Contract Value : ₹ 3.96 Lakh

Government Departments No of Bidders 3

Maharashtra View Result →

Public Administrative Department #11453099 AOC

Procurement Of Telemadicinal Equipments To Urban Wellness Centers In Madhugiri Town Limits - Online Ups Kva With 60 Minutes Battery Backup,Up S Type-3Kva Online Ups On Running Load,Bastery Backup-60 Mimites Or Higher On Running Load,Sony Whult900n/Bzin Bluetooth Headset (Black, On The Ear),The Product Should Provide One Year Warrenty With Good Quality Material Which Includes All Gst,Frieght,Transportation Etc Chages,Study Engineered Wood Office Table (Free Standing, Finish Color - Wenge And White, Knock Down),Primary Material-Engineered Wood,Primary Material Subtype-Particle Board,Study Engineered Wood Office Table,High-Speed, On Internet Via Technologies Like Fiber, Dsl, Cable, Wireless, And Satellite, With Options From Providers Like Jio And Airtel, Providing Various Speed Tiers,Advanced Audio Configuration Presenting A Versatile 4.1 Channel Setup, The Sw-0152 Offers An Enhanced Audio Experience For Your Music, Movies, And Gaming Sessions, Powerful Sound Output Experience A Speaker Output Of 70W,High-Performance Webcam, Full Hd Webcam Is An Excellent Choice. It Allows You To Present Your Work And Your Profile In An Ideal Manner. And, You Can Conveniently Change Its Angle And Talk To Your Coworkers From A Proper Angle,Printer-Recommended Monthly Print-Volume-Recommended Monthly Print Volume,Desktop All In One Core With Processor-X86 Based Processor Intel Core I5 12Th Gen Or Amd Ryzen 5 5000 Series, Hexacore 3.3Ghz. 16 Mb Cache Or Latest Generation,Diagnostic Complete Set With Ophthalmoscope The Primary Toolsets That Any Physician Will Need At The Most Basic Level Are The Diagnostic Sets. These Are Of Utmost Importance To Conduct Any Comprehensive Physical Test. It Generally Contains Tools To Attend To Your Ent Needs, Like A Bent Arm Illuminator, Nasal Speculum,Instant S Glucometer Is A Trusted, Easy-To-Use Blood Glucose Monitoring System Designed For Home Users And Healthcare Facilities. Accu Chek Instant S Exceeds Iso 15197 2013 Standards. With Lcd Display, Single-Button Operation, And Intuitive Target Range Indicator, System Supports Caregivers In Delivering Reliable, Fast, And Confident Glycemic Assessment At Bedside Or Home,The Magna Multi-Parameter Monitor Is An Advanced Medical Device Designed To Monitor And Record Essential Patient Vitals, Including Ecg, Spo2and Nibp.It Features A 7 Color Tft Lcd Screen With Led Backlight,The Waterproof Premium Digital Thermometer (Dmt-4326) Is A High-Precision Thermometer Designed For Quick And Easy Temperature Measurement Across Clinical And Home Settings. Its Waterproof Design Ensures Superior Hygiene And Easy Cleaning, While The Digital Display Provides Fast, Accurate Readings. The Dmt-4326 Is Ideal For Oral, Rectal, And Underarm Use, With A User-Friendly Design That Guarantees Comfort And Reliability,The 3M Littmann Core Digital Stethoscope With A High Polish Matte Mirror Finish Chestpiece And Black Tube (Model 8480) Integrates Cutting-Edge Digital Technology With An Elegant, Professional Design. This Advanced Stethoscope Is Engineered For Precision In Auscultation, Offering A Seamless Blend Of Digital And Acoustic Performance

Contract Date: Ref. Documents Contract Value : ₹ 9.85 Lakh

Local Bodies No of Bidders 1

Karnataka View Result →

Communications and Information Technology #11432475 Technical Bid

Tender for Server Type 1 , Server Type 2 , Server Type 3 , Server Type 4 , Server Type 5 , Server Type 6 , Access Switches For Gpu , Access Switches For Servers , Core Switches , Oob Switches , Object Storage (5Pib Usable) , Network Firewall Type-1 , Network Firewall Type-2 , Load Balancers , Web Application Firewalls , Network Monitoring System , Packet Broker , Network Tap (Multi Mode) , Network Tap (Single Mode) Cost Of Onsite Manpower Item Description Server Administrator Senior Server Administrator Storage Administrator Security Administrator Senior Server Administrator Network Engineer Technical Support Engineer Ict Infrastructure Assistant Total Cost For Supplying And Maintaining Ict Components For Log Management Analytics(Lumpsum Cost Of Service In Totality)-Including Gst

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 1

Delhi View Result →

Health and Family Welfare #11430568 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 7

Rajasthan View Result →

Housing Urban and Rular Development #11415087 Technical Bid

Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Indian Cables Ltd./ Polycab / repair renovation Cables / Finolex / Havells Cables. 35 Sqmm Size , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , -Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 105 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , -Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Clear Water Pump: Supplying, Erection, Testing And Commissioning Of Horizontal Motor Pumping Set For Clear Water Having Head As Per The Indicated Requirements Of Discharge In Lpm And Power Capacity In Bhp As Per Is Marked 8400 Lpm X 30.00 M Head (At Mbs) , Ns Item -Design, Construction, Erection And Commissioning Of 1 Ranneywell (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 30 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 1.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Haryana View Result →

Defence #11408076 AOC

Bids Are invited for Cleanroom Equipment And Electrostatic Discharge Protection Solutions Ultra-Pure Nitrogen Distribution And Energy Optimization System For Controlled Environments , Contamination-Controlled Garment Storage And Suspension System , Esd-Compliant Ergonomic Seating System With Integrated Armrests For Controlled Environments , Static Dissipative Work Surface Assembly With Bench-Mounted Ionization Module , Integrated Electrostatic Discharge Control And Measurement System For Cleanroom Applications , Controlled Environment Particulate Extraction And Air Displacement Unit , Portable Particle Quantification Unit For Controlled Environments , Cleanroom-Compatible Portable Particle Monitoring System , Lightweight Maintenance And Access Platforms For Controlled Environments , Industrial Weighing And Load Measurement Systems - Platform And Suspended Crane Type , Static Dissipative Storage Container And Bin System For Subsystem Protection And Organization , Air-Tight Cleanroom Access Door With Overhead Closure And Controlled Airflow Interface , Controlled Cleanroom Utility System, Transport, And Cleaning Assembly With Esd Safe , Controlled Environment Protective Wear And Static Dissipative Consumables For Personnel Safety , Electrostatic Discharge Control Accessories And Cleanroom Contamination Control Materials , Footwear Organization And Storage Assembly With Self-Closing Access Mechanism For Cleanroom Applications , Cleanroom Monitoring And Access Control System With Environmental Display , Esd-Safe Cleanroom Consumables For Surface Cleaning, Particle Removal, And Static-Protected Packaging , Electrostatic Discharge Safe Precision Handling And Assembly Tool Kit For Electronic Component , Integrated Differential Pressure Measurement With Silicone-Free Sealing System For Cleanroom Applications , Cleanroom-Compatible Waste Collection Bins With Liner Provision Total Quantity : 2066

Contract Date: Ref. Documents Contract Value : ₹ 4.24 Crore

Government Departments No of Bidders 8

Telangana View Result →

Petroleum and Natural Gas #11360289 AOC

Bids Are invited for Spares For Kosan Carousel And Allied Equipment At Pune Bp Load Cell Module Mkiv 1Loadcell - Part No 128405 , Pcb Cuc Mkiii Hmi-Ctrl - Part No 113936 , Pt Pd Transmitter New Type - Part No 131507 , Travelling Wheel - Part No 714903 , Pcb, Cuc Mkiv Hmi-Ctrl - Part No 134362 , Data Monitoring System For Vision Upgradation Cpu - Part No Kpot0654 , Service Kit For Gas Stop - Part No 961148 , Main Bell - Part No 110656 Total Quantity : 25

Contract Date: Ref. Documents Contract Value : ₹ 10.08 Lakh

Boards / Undertakings / PSU No of Bidders 1

Maharashtra View Result →

Defence #11337048 AOC

Bids Are invited for 40 Kva Ups To Be Supplied With 01 X Bty Banks Each To Provide 1.5-Hour Backup Battery 150Ah 12V X 32 Nos , Automatic Transfer Switch Ats 3 Source With 5 Nos Of 3 Phase Balanced Output Power Distr For Instln Of Power Supply Equipment Configuration Of Power Control Systems , Dual Source Ups Ats Panel 40 Kva , Active Harmonic Filter For 100 Kva Load , Automatic Phase Sequence Corrector 100 Kva , Digital Earthing System For Power Management. , Aluminium 3.5 Core 135 Sqmm Aluminium Cable Armoured , Aluminium 2 Core 50 Sqmm Ua Cable , Copper Cable 6 Sqmm Flame , Copper Cable 35 Sqmm Flame Resistant , Controller Unit And Professional Scada Supervisory Control And Data Acquisition Software , Ac Protection Module 1 Plus 1 Hot Wire 40 Kva , 60 Kva Digital Static Voltage Regulator. 170 To 470 , Integration Of Power Generation Room Including Spares Tool Kits And Cable Trays Ducts Etc Only For Power Room Area , High Low Voltage Disconnector Three Phase , Earth Distribution Bar Cu 200 X 100 X 3 Mm With 10 Terminals , Central Heating, Ventilation And Air Conditioning Hvac System , Environmental Monitoring System With Ambient Sensors For Temp And Humidity. , Lt Panal , Antistatic Mat Floor , Installation And Commissioning Charges Total Quantity : 1917

Contract Date: Ref. Documents Contract Value : ₹ 69.91 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 12

Ladakh View Result →

Agriculture #11336082 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Kerala View Result →

10.

Power #11332962 Technical Bid

Tender for Procurement Of M/S Avery India Ltd. Make Mandatory Spare Of In-Motion Rail Weigh Bridge (Imwb-I) As Per Rdso Specification No-Wd-29Misc-19 Rev-1 System Installed At Sstpp, Mppgcl, Dongalia. (As Per Tender Schedule) , Pair Of Weigh Rail 5.5M Weigh Bridge , Indicator Rl01 , Pc Add-On Dio Card (Pci-7248 / Sys Aids) , Distribution Box Assy. , Load Cell Sensor Wire , Wim Controller Assy. (Mootek) , Power Supply 24V, 2A Dc , Opto Isolator Card - 24 Line , Unmanaged Switch 8 Port 10/100Mbps , Be12 Wit, Claas D Type 3, Model Bxt Ml4 , Be24 Wit Claas D Type 3, Model Bxt Ml4 , Condition Monitoring System ,Drc - Mcm , Mod Drm 2P 30Fm Din35 Rai, Claas D, Type 3 , Mod Drm 2P 255Fm Din35 Ra, Claas D Type 3 , Arrester, Class D Type 3 , Base Part For Bxtml4, Model Bxt Bas , Cvt 2Kva 230Vac For 52Pl 140T

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Madhya Pradesh View Result →

11.

Educational and Research Institute #11326531 Technical Bid

Tender for Purchase Of Equipments For Mechanical Department , Purchase Of Equipments For Mechanical Department , Tail Stock Assembly ● Medium-Duty Tailstock Assembly For Dismantling & Assembly ● Quill Stroke: Minimum 75 Mm ● Taper: Mt-3 (Preferred Standard) ● Feed: Hand Wheel Operated ● Features: Set-Over Screws For Taper Turning ● Spindle Locking Arrangement ● Body: Cast Iron (Fg 260) ● Spindle: Hardened Steel , Working Model Of Fuel Supply System - Petrol Mpfi Type ● Petrol Multi Point Fuel Injection (Mpfi) System For Dismantling And Assembly Practice ● System Type: Non-Working / Cut-Section Model For Study Of Internal Construction ●Construction: Actual Automotive Components Or Equivalent Training Model Mounted On Frame ● Includes Throttle Body (Sectioned), Fuel Injectors, Fuel Rail, Intake Manifold ● Includes Fuel Pump, Fuel Tank (Dummy), Fuel Filter, Pressure Regulator ● Includes Ignition System Components: Ignition Coil, Spark Plug, Distributor (If Applicable) ● Ecu Module (Dummy/Display Type) With Wiring Layout Representation ● All Components Cut-Open, Painted, And Clearly Labelled ● Provision For Manual Demonstration Of Flow Path And Component Interaction ● Mounted On Rigid Ms Powder-Coated Frame ● Designed For Repeated Dismantling, Assembly, And Component Identification , Hydraulic Cylinder Bore Diameter: 50 Mm ● Stroke Length: 250 Mm ● Working Pressure: 160 Bar ● Cylinder Tube: Honed Steel ● Piston Rod: Hard Chrome Plated ● Seals: Standard Industrial Seals ● End Caps: Steel Supply: ● Mounted On Training Base ● Suitable For Dismantling And Inspection , Hydraulic Operated Directional Control Valves (Dcv) ● Type: Manual Spool Type Dc Valve ● Configuration: 4/2 Way ● Size: Ng06 (Cetop 3) ● Rated Pressure: 210 Bar ● Flow Capacity: 20-40 Lpm ● Body: Hardened Steel / Cast Steel ● Spool: Ground And Hardened ● Ports: Clearly Marked (P, A, B, T) Supply: ● Mounted On Training Plate ● Suitable For Dismantling And Study , Bearing With Shaft Assembly ● Type: Dismantling And Assembly Teaching Unit ● Shaft Diameter: 30 Mm ● Shaft Material: En8 Steel ● Bearings: Deep Groove Ball Bearing (6205 / 6206) ● Housing: Cast Iron ● Locking Arrangement: ● Circlips ● End Covers Mounting: ● Bench-Mounted / Frame Mounted Unit , Coupling Unit Using Driving And Driven Shafts Using Plummer Block Bearing Unit ● The Plummer Block Housing Material: Cast Iron (Grade Fg 200 Or Equivalent). Type: Sng Or Snl Series (Split-Type Housing). Sealing: Felt Seals Or V-Ring Seals (To Demonstrate Lubrication Retention). Lubrication: Provided With A Grease Nipple At The Top Center For Manual Lubrication Practice. ● The Bearing Type: Self-Aligning Ball Bearing (1200 Series) Or Spherical Roller Bearing (22200 Series). Bore Diameter: Standard 25Mm Or 30 Mm. ● Shafting And Coupling Shaft Material: Ground Carbon Steel (En8 Or En9) For High Surface Finish. ● Coupling Type: Flexible Coupling: To Demonstrate The Bearings Ability To Handle Slight Misalignment. ● Rigid Flange Coupling: To Demonstrate Traditional Direct Connection. ● Driving/Driven Setup: One Shaft Connected To A Small Electric Motor (Driving) And The Other To A Brake Drum Or Load (Driven). , 3D Printing Machine ● Build Volume(Wxdxh) 256 X 256 X 256 Mm³ ● Shell Enclosed (Plastic & Glass) Hot End All-Metal ● Nozzle 0.4 Mm Stainless Steel Included ● Max Hot End Temperature 300 ℃ ● Nozzle Diameter 0.4 Mm (Included) 0.2 Mm, 0.6 Mm, 0.8 Mm ● Build Plate Compatibility Textured Pei Plate, Cool Plate, Engineering Plate, High Temperature Plate ● Max Build Plate Temperature 100℃ ● Max Speed Of Tool Head 500 Mm/S ● Max Acceleration Of Tool Head 20 M/S² ● Supported Filament Pla, Petg, Tpu, Pva, Pet, Abs, Asa ● Chamber Monitoring Camera Low ● Rate Camera 1280 X 720/0.5Fps ● Time Lapse Supported ● Filament Run Out Sensor :Yes ● Control Board Fan Closed Loop Control ● Auxiliary Part Cooling Fan Closed Loop Control ● Air Filter Activated Carbon Filter

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Tamil Nadu View Result →

12.

Educational and Research Institute #11323155 Technical Bid

Tender for Supply Of Equipment For Electronics And Cmmunication Engineering Department: (As Per Specification And Nit) , Supply Of Equipment For Electronics And Cmmunication Engineering Department , 8051 Micro Controller Kit : Specification : • Operating Voltage: +5 V Dc. • Flash Memory: 4 Kb (At89c51) / 8 Kb (At89s52). • Ram: 128 Bytes Internal Ram. • 16 × 2 Alphanumeric Lcd Display .• Push Buttons / Tactile Switches. • Dip Switches For Digital Input .• Inbuilt Adc Interface: Ldr, Potentiometer. • Inbuilt Dac Interface .• Inbuilt Stepper Motor Driver With Stepper Motor .• Inbuilt Dc Motor Driver With Dc Motor. • 1 × 4 Led Array, 1 × 4 Keypad, 1 × Relay. • 1 × Buzzer, 16 × 2 Lcd Display, 1 × Pwm Driver. • 1 × Hardware Interrupt Key, Inbuilt Rtc. • Inbuilt Eeprom And Uart Module. • 4 × 7-Segment Display. • Supports Both Assembly And C Language Programming. • Pc Interfaceable. , Temperaturemeasurementkitspecification : • Sensors: Rtd (Pt-100), Thermocouple (Fe-K/J-Type), And/Or Thermistor (Ntc). • Display: 3½ Digit Led/Lcd Digital Display (Typically 200 Mv Fsd). • Temperature Source: Portable Water Kettle Or Heater Block. • Signal Conditioning: On-Board Circuitry For Amplification, Linearization, And Cold Junction Compensation. • Test Points: Multiple 2 Mm / 4 Mm Banana Sockets For Monitoring Input/Output Signals. • Power Supply: 230 V Ac, 50 Hz, Single-Phase. • Accessories: Glass Thermometer, 10 K Ntc Thermistor Probe, K-Type Thermocouple Probe, Patch Cords And User Manual. , Ask Modulationanddemodulation Kit: Specification : • Message Signal1: 8-Bit Variable Data,Amplitude 5V. • Message Signal 2: Debounced Data, Amplitude Low (0) And High (5 V). • Message Signal 3: Fixed Data 25 Khz, 12.5 Khz, 6.25 Khz, 3.12 Khz, Amplitude 5 V. • Carrier Signal: Sine Wave, Frequency 200 Khz, Amplitude 5 V. • Modulator Type: Switching Modulator Using Analog Switch / Transistor Switching Ic. • Demodulator: Envelope Detector And Lpf. • Comparator: Lm311 Based. • Supply Voltage (Board): +12 V, +5 V Dc. • Supply Current: 100 Ma Minimum. • Input Voltage: 230 V Ac, 50 Hz. • Interface Connectors: 2 Mm Banana Socket. , Dth Trainer Kit: Specification :Power Supply:• 200 V To 240 V Ac, 50 Hz.Dish Antenna: • 1.5 Ft Aluminium Steerable Dish Antenna.Lnb (Low Noise Block Down Converter): • Input Frequency: Ku-Band.• Output Frequency: 950 Mhz To 1450 Mhz. • Conversion Gain: 65 Db.• Noise Temperature: 35 K (Max).Set-Top Box Receiver In Trainer Form:• If Frequency: 70 Mhz.• Video Bandwidth: 50 Hz To 5 Mhz. • Video Output Level: 1 Vpp At 75 Ω Load. • Video Polarity: Normal/Inverted, Switch Selectable. • Audio Subcarrier Frequency:Tunable From 5.0 Mhz To 8.0 Mhz.• Remote Control Provided.• Hdmi Cable: 10 M. Controls:• Channel Selection.• Volume Control. Fault Simulation:• Five Built-In Simulated Faults For Troubleshootingexperiments.• If Signal Disconnected.• Video Output Fault.• Audio Mute Fault.• Tuner Misalignment.• Rf Output Interruption.Pcb Size: • 15 × 12 With Multicolour Section-Wise Block Diagram.Standard Accessories:• 1.5 Ft Dish Antenna.• Lnb.• Trainer Pcb.• Dish Connecting Wire.• Audio-Video Cable.• User Manual.• Acrylic Cover.• Hardware Materials For Assembly Of Dish Antenna.Additional Features:• Dth Subscription Connection Withdoordarshanfree Channels. • Free-To-Air Channel Demonstration. , Fpga Trainer Kit: Specification : • Must Use Industry-Standard Mid-Range Fpga Device • Usb-Jtag Programmable, Compatible With Vivado Ise (Webpack). • Power Supply: 5 V Dc Through Usb Or External Adapter. • On-Board Peripherals: Leds, Switches, Push Buttons, 7-Segment Display,Clock Source, Gpio / Pmod Expansion Ports, Uart, Vga / Hdmi, Usbuart Bridge, Usb Cable. •User Manual.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 9

Tamil Nadu View Result →

13.

Housing Urban and Rular Development #11319892 AOC

Contract Date: Jun 19, 2026 Contract Value : ₹ 1.28 Crore

Government Departments No of Bidders 3

Maharashtra View Result →

14.

Railways #11303718 AOC

Contract Date: Ref. Documents Contract Value : ₹ 45.54 Lakh

Government Departments No of Bidders 2

Assam View Result →

15.

Educational and Research Institute #11294681 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

Tamil Nadu View Result →

16.

Housing Urban and Rular Development #11294593 Technical Bid

Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Ns Item - Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (35 Sqmm Size) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 200 Kva (As Per Parameters Of Cpcb 4) 200 Kva (As Per Parameters Of Cpcb 4) , Supplying, Erection, Testing And Commissioning Of Horizontal Centrifugal Clear Water Pumping Set Capacity 2780 Lpm X 50 M Head, 45 Bhp Motor, Complete With Installation At Mbs Near Yamuna River. , Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 45 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Design, Construction, Erection And Commissioning Of 2 No. Ranneywell 1 At Machhrola And 1 At Jajjal (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 32 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 2.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Haryana View Result →

17.

Defence #11281747 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 5

Rajasthan View Result →

18.

Educational and Research Institute #11277941 Technical Bid

Tender For Purchase Of Lab Equipments-- 1 Purchase Of Lab Equipments 2 Acidity Test Kitspecifications:Ethyl Alcohol Sodium Carbonate Solution Universal Indicator Solution Laboratory-Grade Test Tubes Droppers Colour Comparison Chart For Test Result Comparison Chemicals Supplied In Labelled Containers With Safety Instructions Suitable For Laboratory Educational And Testing Applications 3 Single Phase Resistive Loadspecifications:Type: Single Phase Loading Rheostat Power Rating: 5 Kw Supply: 230 V Ac, Single Phase, 50 Hz Total Number Of Load Steps: 8 Approximate Dimensions: 18 × 18 × 22 Inches (L × B × H) Comprising Electrical Load Resistors Suitable For Laboratory Loading Applications Resistors Shall Be Special Cement-Insulated Type Mounted On Powder-Coated Ms Panel/Enclosure Individual On/Off Rotary Switches Provided For Load Selection Mounted On Rubber Wheels/Casters For Portability 4 Three Phase Resistive Load Specifications:Rating: 5.25 Kw Supply: 415 V Ac, 3-Phase, 50 Hz Total Number Of Load Steps: 6 Main Switch To Be Provided Approximate Dimensions: 18 × 18 × 22 Inches (L × B × H) Comprising Special Cement-Insulated Electrical Load Resistors Mounted On Powder-Coated Ms Panel/Enclosure Individual On/Off Rotary Switches For Load Selection Mounted On Rubber Wheels/Casters For Portability Suitable For Laboratory Load Testing Applications Proper Insulation, Ventilation, And Earthing Arrangement To Be Provided 5 Three Phase Capacitor Bank Specifications: 3-Phase Capacitor Bank Rating: 2 Kvar Voltage: 440 V Ac Frequency: 50 Hz Heavy Duty Self-Healing Capacitor Units Powder Coated Ms Enclosure Compact Panel Mounted/Floor Mounted Construction Proper Ventilation Arrangement To Be Provided Capacitor Duty Contactor/Switch To Be Provided Fuse/Mcb Protection To Be Provided Discharge Resistors To Be Provided For Safety Proper Earthing Arrangement Provided 6 3 Phase Auto Transformer Starter Specifications: 3-Phase Variable Autotransformer Input: 415 V Output: 0–470 V Ac (Continuous) Current: 15 A Copper Wound, Carbon Brush Type Heavy Duty Toroidal/Core Construction Mounted In Powder Coated Ms/Crca Enclosure Front Panel Mounted Voltage Control Knob With Scale Indication Proper Insulated Terminals Provided Floor/Bench Mounted Type Suitable For Laboratory Use Input / Output Terminal Arrangement Provided Mcb/Fuse Protection Provided Proper Earthing Terminal Provided Ventilation Arrangement For Heat Dissipation 7 3 Floor Lift Interfacing Model Specifications: Type: Table-Top Lift Model Floors: 3 Levels Structure: Transparent Acrylic / Ms Frame Cabin: Moving Lift Car With Guide Rails Drive: Dc Geared Motor / Stepper Motor Motion: Up/Down Movement, Floor Indication Leds (1, 2, 3) Direction Indicators (Up/Down), Start & Stop Atevery Stage, Over Load Limit Control Three-Floor Lift Operation Plc Interfacing And Programming Floor Selection Logic Automatic Stopping At Floors Direction Indication System Educational Demonstration Of Elevator Automation 8 Mcb Elcb Trainer Kit Specifications: 1 Phase/3 Phase, 2/3/4 Pole, 3A-16A Single Pole Mcb 2-5Amps Two Pole Elcb 30Ma Lamp Load Single Phase 5Amps Panel Enclosure And Terminal Outlets 9 Signal Generator Specifications: Frequency Range: 0.1 Hz To 5 Mhz. Display: 4 To 6 Digit Led Display Output Waveforms: Sine, Triangle, Square, ± Pulse, ± Ramp. Amplitude: 0 – 20 Vp-P. Rise Time: 10 Dso Specifications: Bandwidth: 50 - 100 Mhz. Sampling Rate: 1Gs/S. Channels: 2 (Minimum) Power Supply: 100V–240V Ac, 50-60 Hz Automatic Measurement: Vpp, Vavg,Rms, Frequency, Period, Vmax, Vmin, Rise Time, Fall Time, + Width, - Width, +Duty, - Duty Etc., Horizontal Scale: 5 Ns/Div – 50 S/Div Or Equivalent Vertical Resolution: 8 Bits (2 Channels Simultaneously) Vertical Sensitivity: 1 Mv/Div – 10 V/Div (At Input) Waveform Math: +, -, X , ÷, Invert, Fft Etc., Waveform Storage: 16 Waveforms Or Equivalent Communication Interface: Usb Host, Usb Interface. 7-Inch Color Display Or Equivalent Input Impedance - 1 Mω ±2%, // 20 Pf 2 × Passive Probes (1X/10X) 11 Pwm Based Step Down Dc Chopper Using Mosfet/Igbt Kit Specifications: Pwm Based Step-Down Dc Chopper (Buck Converter) Power Device : Power Mosfet / Igbt Based Switching Circuit Input Supply : 24 V Dc To 110 V Dc Or Derived From 230 V Ac Mains Through Rectifier Unit Output Voltage :(0 To Vin) Variable Dc Output Current : Up To 5 A Dc Maximum With Suitable Load Resistor (R Load) Pwm Duty Cycle Control Provided Pwm Generation And Control Circuit Inbuilt Gate Driver Circuit Provided 12 Dual Output Regulated Dc Variable Power Supplyspecifications: • Input Voltage: 230V/50 Hz Ac. • Output Voltage: (0–30)V Dc. • Output Current: (0–2)A Dc. • Protection Circuit: Over Voltage, Over Current, And Short-Circuit Protection. • High Efficiency: Greater Than 85%. • Low Ripple And Noise: Less Than 50 Mv. • Digital Display. 13 8051 Micro Controller Kit Specifications: • Operating Voltage: +5 V Dc. • Flash Memory: 4 Kb (At89C51) / 8 Kb (At89S52). • Ram: 128 Bytes Internal Ram. • 16 × 2 Alphanumeric Lcd Display. • Push Buttons / Tactile Switches. • Dip Switches For Digital Input. • Inbuilt Adc Interface: Ldr, Potentiometer. • Inbuilt Dac Interface. • Inbuilt Stepper Motor Driver With Stepper Motor. • Inbuilt Dc Motor Driver With Dc Motor. • 1 × 4 Led Array, 1 × 4 Keypad, 1 × Relay. • 1 × Buzzer, 16 × 2 Lcd Display, 1 × Pwm Driver. • 1 × Hardware Interrupt Key, Inbuilt Rtc. • Inbuilt Eeprom And Uart Module. • 4 × 7-Segment Display. • Supports Both Assembly And C Language Programming. • Pc Interfaceable. 14 Stepper Motor Drive Kit Specifications: Working Model 8051 Micro Controller Kit Capable For Stepper Motor Drive Kit 15 Digital Trainer Kit Specifications: 5V Dc, 1A Regulated Power Supply ±12V Dc / ±15V, 200 Ma Regulated Power Supply Solderless Breadboard To Accommodate 8 × 16-Pin Ics, Zif (Zero Insertion Force) Ic Sockets Logic Input And Output Leds For Output Monitoring 16 Buffered Led Outputs 16 Debounced Switch Inputs Variable Clock Generator: 0.5 Hz To 50 Hz Single Pulse Output: 100 Ms (Buffered, Positive And Negative Outputs) One Seven-Segment Display With 4 Bcd Inputs Built-In Logic Probes Built-In Logic Switches Manual Clock: Debounced Push Button (One Pulse Per Press) 16 8 Bit Adc/Dac Interface Boardspecifications: • Thermistor / Lm35 Input In One Channel. • Variable Input (0–5) V In Another Channel. • 8 Leds For Digital Output Indication.• Necessary Control Signals Provided For Adc0809. • 8-Bit Dac Using Dac0808. • 8-Bit Digital Input From Controller. • Single-Channel Dac Output:(0–10) V. • Power Supply:±12 V Or ±15 V For Analog Circuitry Please Enable Macros To View Boq Information = Limited

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Tamil Nadu View Result →

19.

Educational and Research Institute #11269503 Price Bid

Tender For Purchase Of Equipments For Ece Department-- 1 Function Generator • Frequency Range: 0.1 Hz To 5 Mhz• Display: 4 To 6 Digit Led Display• Output Waveforms: Sine, Triangle, Square, ± Pulse, ± Ramp.• Amplitude: 0–20 Vpp.• Rise Time: 2 Strain Gauge Trainer Kit•Ac Mains Power Supply: 230 V ±10%, 50 Hz• Metal Foil Strain Gauge Mounted Onbeam/Cantilever.• Strain Measurement Under Applied Load.• Wheatstone Bridge Arrangement.• Signal Conditioning And Amplification Circuit.• Instrumentation Amplifiers With 3½ Digit Display For Strain / Output Voltage.• Zero And Gain Adjustment Controls.• Provision For Applying Calibrated Loads.• Table-Top Trainer With Labelled Panel.• Test Points For Signal Measurement.• Built-In Dc Power Supplies And Wooden Closed Cabinet.• Supplied With Patch Cords And User Manual. 3 Temperature Measurement Kit• Sensors:Rtd (Pt-100), Thermocouple (Fe-K/J-Type), And/Or Thermistor (Ntc).• Display: 3½ Digit Led/Lcd Digital Display(Typically 200 Mv Fsd).• Temperature Source: Portable Water Kettle Orheater Block.• Signal Conditioning: On-Board Circuitry Foramplification, Linearization, And Cold Junctioncompensation.• Test Points: Multiple 2 Mm / 4 Mm Banana Sockets For Monitoring Input/Output Signals.• Power Supply: 230 V Ac, 50 Hz, Single-Phase.• Accessories: Glass Thermometer, 10 K Ntcthermistor Probe, K-Type Thermocouple Probe,Patch Cords And User Manual. 4 Cathode Ray Oscilloscopebandwidth: Dc To 30 Mhz (-3 Db)- Sensitivity: 1 Mv/Div To 5 V/Div- Display Modes: Ch1, Ch2, Dual(Chop/Alt), Add, Sub- Timebase: 0.2 Μs/Div To 0.5 S/Div(Essential For Slow Bio-Signals)- Magnification: X 10 Sweep Magnifier- Triggering: Alt Triggering, Auto, Norm, - Tv-V/H With Source Selection (Ch1, Ch2, Line, Ext).- Input Impedance: 1 Mohm || 25Pf- Included Accessories: Two 60 Mhzpassive Probes, Power Cord, Anduser Manual Please Enable Macros To View Boq Information = Limited

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Tamil Nadu View Result →

20.

Educational and Research Institute #11260426 Price Bid

Tender For Ece Lab Items Dept Use - 1 Eliminator Transformer (Step-Down) Kitinput - 220V - 240V Ac, 50 Hz, Output-2V To 12V Dc, 0-2 A Ripple: 2 Strain Gauge Trainer Kitmetal Foil Strain Gauge Mounted On Beam/Cantilever Strain Measurement Under Applied Load Wheatstone Bridge Arrangementsignal Conditioning And Amplification Circuitinstrumentation Amplifiers, 3½ Digit Display Of Strain / Output Voltage Zero And Gain Adjustment Controlsprovision For Applying Calibrated Loads Regulated Power Supply, 230 V Ac, 50 Hz Table-Top Trainer With Labeled Paneltest Points To Measure The Signalsbuilt In Power Supplies And Wooden Closed Cabinet Supplied With Patch Cords And Experiment Manual 3 Temperature Measurement Kitsensors: Rtd (Pt-100), Thermocouple (Fe-K/J-Type), And/Or Thermistor (Ntc).Display: 3½ Digit Led/Lcd Digital Display (Typically 200Mv Fsd). Temperature Source: Portable Water Kettle Or Heater Block.Signal Conditioning: On-Board Circuitry For Amplification, Linearization, And Cold Junction Compensation.Test Points: Multiple 2Mm/4Mm Banana Sockets For Monitoring Input/Output Signals.Power Supply: 230V Ac, 50Hz, Single-Phase.Accessories: Includes A Glass Thermometer, Ntc Thermistor Probe 10K, K-Type Thermocouple Probe, Patch Cords, And Instruction Manual. 4 Sim Reader Trainer Kitsim Compatibility Supports 2G 3G 4G Lte Sim Cards,Sim Reader Mode: Reading Writing Gsm Sim Card Data, Imsi, Ki Codes, Phonebook Interface Usb 2.0 Or Rs 232 Serial Port For Pc Communication.Clock Frequencies: Selectable Frequencies 3.579 Mhz, 7.159 Mhz, 14.318 Mhz For Sim Card Operation.Power Supply: Onboard Smps 12V 2A Or 5V Dc With Overload Protection. Hardware Components:6-Pin Or 8 Pin Sim Card Socket.Led Indicators For Power, Sim Reset, And Data Activity.Optional Lcd 128X64 And Keypad 20 Keys For Standalone Operation. Software Tools Support For At Commands Gsm Etsi 07.0707.05, Sim Manager Utilities, And Data Logger Functionality. Common Trainer Kit Featuresfault Simulation Ability To Create Faults E.G., Sim Not Detected, Vcc Failure For Troubleshooting.Test Points: Multiple Test Points E.G., 55 Nos For Observing Signals Sim Rst, Clk, I O Via Oscilloscope.Construction Tested Glass Epoxy Pcb, Often Housed In A Study Educational Case. = Limited

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Tamil Nadu View Result →

21.

Heavy Industries and Public Enterprises #11255514 AOC

Bids Are Invited For 094100031Transformer For Fault Current Monitoring, 80Mm 751031 , 095000346 Over Voltage Protection Dehn Venci, Typ1 Plus 2, 230V Ac, Remote 646293 , 091700350 Load-Break Switch Intermediate Installation, 3Pol., 40...1 666318 , 091700351 Main Switch Kit Grey For 3Va20,21,22 666326 , 091700352 Terminal Cover For 3Va20,21,22 666329 , 094500153 Motor Protection 3Rv2 7-10A Without Help Switch, Cagecl Amp 580810 , 094500154 Motor Protection Helpswitch 1N0 Plus 1Nc, Cageclahp 580818 , 094500155 3 Phase Busbar For 3 X 3Rv2, Extension, Cageclamp 582939 , 094500156 Connector For 3Rv2, S00, Cageclamp 582942 , 094500157 Motor Pr0tection 3Rv2 1, 4-2A Without Helpswitch, Cageclamp 580803 , 094500158 Wire Protection 5Sy4 Typ C, 6A With0ut Helpswitch 507085 , 094500159 Wire Protection Helpswitch For 5Sy4 433799 , 095000347 Current Protection Fuse 2-Pin., C2a, 230V, 30Ma 697828 , 094500160 Trafo Protection 3Rv24 5,5-8,0A Without Helpswitch, Cageclamp 580816 , 094200076 Transformer 2500Va, Pri 208-550 Vac, Sec 115-230 Vac 700414 , 092800394 System Lamp, 530Mm, 24V Dc, Led 594023 , 092800395 Connection For System Lighting Led 3M, Door Contact Switch 587884 , 091900048 Earthing Contact S0cket, Grey, Push-In, Germany 657183 , 094500161 Motor Protection 3Rv2 2,2-3,2 A Without Helpswitch, Cageclamp 580805 , 094500162 3 Phase Busbar For 2X 3Rv2, Infeed Left, Cageclanp 582938 , 313000345 Power Supply Sitop 3X320-575Vac-24 Vdc-40A 562833 , 094500163 Motor Protection 3Rv2 5,5 8A Without Helpswitch, Cageclamp 580809 , 094900070 Emergency Stop Butt0n, Signum 22Mm, Illuminated 641327 , 094900071 Holder Metal, Sirius Act 22Mm 641350 , 094900072 Switch Block, Sirius Act 22Mm, 1Nc, Front Mounting, Cagecl 641352 , 094900073 Switch Block, Sirius Act 22Mm, 1No, Front Mounting, Cagecl 641351 , 092800396 Led Module White, Sirius Act 22Mm, 24 Vdc, Frontmount, Cage 641360 , 092800397 Yellow Underlay Label For Emergenc, Sirius Act, Empty, 75M 641372 , 091600364 Workinghour Counter Ts Rail, 7 Digit Lcd, Without Reset, 2 628678 , 093600278 Fault Current Monitoring 0,03 40A, 2W, Cageclamp 751030 , 091700353 Power Relay 3Rt2-S00 5,5Kw, 3H, 1N0, 24 Vdc, Cageclamp 580669 , 091700354 Power Relay 3Rt2-S00 3Kw, 3H, 1N0, 24 Vdc, Cageclahp 580664 , 096600108 Screening Link Varist0r Without Led, 3Rt2- S00, 24-70 Vdc 580691 - 096600108 Screening Link Varist0r Without Led, 3Rt2-S00, 24-70 Vdc 580691 , 313000339 Opto Coupler 1No, 24 Vdc, 3A, Cage Clamp 527148 , 313000340 Patch Cable Ethernet Cat 6, 1 Meter 597005 , 094500167 Wire Protection 5Sy4 Typ C, 4A With0ut Helpswitch 433804 , 313000344 Power Supply Sitop Ac 120-230-500V-24 Vdc-5A 507285 , 094100032 System P0wer Supply Ps 25W, 24 Vdc, S7 1500 714676 , 313000341 Micro Memory Card S7-1500, 12Mbyte 595494 , 313000342 Front Plug 40-Pin S7 1500, Cage Clamp 599640 , 313000343 Fl Switch Sf 4Tx-1Fx Sc Ethernet 10-100 Rj45 24 Vdc Autocr 597854 , 094500164 Emv Flat Belt Earth Connection, Mb, 16Mm2, 200Mm, 10 Pcs. 597117 , 094500165 Putzmeister 550Cm, Ral 9005 695787 , 094500166 Skintop M32 Seal Insert For 1X Ethernet 6,5Mm 597606 , 472200016 Thermoelectric Cooler, 80W, 24 Vdc 750918 , 092800398 Led Module Blue, Sirius Act 22Mm, 24 Vdc, Frontmount, Cage 641359 , 092800399 Led Module Red, Sirius Act 22Mm, 24 Vdc, Frontmount, Cage 641356 , 313000335 Pressure Compensator M12x1,5 Stainless Steel 636016 , 091700355 Inspection Window Stainless Steel 600X522x38mm 559454 , 313000336 Operator Panel Tp6156 731587 , 313000337 Patch Cable Ethernet Cat 6, 3 Meter 597006 , 313000338 Fl Switch Sf 8Tx-1Fx Sc Ethernet 10-100 Rj45 24 Vdc Autocr 749636 , 091700356 Coupling Relay 859 1W, 24 Vdc, Cage Clamp 507804 Total Quantity : 153

Contract Date: Ref. Documents Contract Value : ₹ 37.97 Lakh

Boards / Undertakings / PSU No of Bidders 1

Madhya Pradesh View Result →

22.

Rural Development #11250007 AOC

Contract Date: Jun 08, 2026 Contract Value : ₹ 14.78 Lakh

Government Departments No of Bidders 3

Maharashtra View Result →

23.

Defence #11240952 AOC

Bids Are Invited For 1 Bulb Zero Watt Red Color 2 Bulb Zero Watt Green Color 3 LED Bulb 5 W 4 LED Bulb 12 W 5 LED Bulb 15 W 6 LED Bulb 18 W 7 LED Bulb 20 W 8 LED Bulb 23 W 9 LED Bulb 85 W 10 LED Tune light 4 feet Complete Assy 24 or 25 W 11 LED Tube Light 2 feet Complete Assy 12 LED Tube light 20 Watt 13 Main Switch 32A 3 Phase 14 Multipin plug 16 A Make 15 Multipin plug 10 A Make 16 Multipin Socket 16 Amp 17 Multipin Socket 10 Amp 18 2 Pin Socket 6 Amp 19 Modular Board 4 inch x 4 inch PVC 20 Modular Board 4 inch x 6 inch PVC 21 Modular Board 6 inch x 8 inch PVC 22 Modular Board 8 inch x 10 inch PVC 23 Modular Board 10 inch x 12 inch PVC 24 Automatic Voltage Stabilizer Cap 2KV Brand Bluebird Product Category StabilizersCapacity 2 kVAWinding Copper WoundWorking Range v 170 to 270 VOutput Voltage 195 to 245 VSuitable For Deep Freezer Microwave Ovens Washing Machine Water Coolers upto 75H.P.Package Contents 1 Stabilizer Manual Warranty CardWarranty 1 Year against manufacturing defects 25 Flexible wire Roll of 90 Mtrs 0.75 Sqm 26 Inverter 5 KVA with battery CVT 5 KVVA Rating 5KVA No. of Batteries Supported 4Maximum Panel Capacity 4000WpNominal Battery bank voltage 48VApplication Area Commercial Applications, Homes and Small ShopsProduct Category HybridInput Voltage Range 65V-165VFeatures Maximum Power Point Tracking User selectable priority settings Real time remote monitoring Export excess power generated & also get backup In-built Zero Export FunctionWarranty 36 Months 27 Battery 150 Amp for inverter Battery Capacity 150 AhBattery Type Tubular TypeType Tubular BatteryWarranty 2 YearModel ECProtection From Battery Deep Discharge 28 Washing Machine Heavy Duty fully auto with Dryer 16 Kg Capacity 15 KilogramsColour Middle BlackProduct Dimensions 77 D x 64.5W x 94H CentimetersSpecial Feature Inverter Auto Restart Child Lock Adjustable Leveling Legs LED DisplayCycle Options Active Steam Tub Clean Baby Wear Cotton AllergenVoltage 230 VoltsControls Type RemoteMaximum Rotational Speed 1400 RPMAccess Location Top Load 29 Water Pump 1.5 HP MONOBLOCK 30 Water Pump 1.0 HP MONOBLOCK 31 Electric Heater Liquid filled 2000W 32 Caseling Caping size 32 x 13 mm 33 Power Socket with Switch 16 AMP 34 Modular Switch 06 AMP 35 Switch Piano 06 AMP 36 Switch Socket Combined 6 AMP 37 Angle Holder 6 Amp 38 Pendent Holder 39 Button Holder 40 MCB 6A 41 MCB 10A 42 MCB 16A 43 MCB 15A 44 MCB 32A 3 Phase 45 MCB 3 Phase 63 AMP 4 pole 46 MCB Box 20 Watt 47 MCB Box 4 Way 48 Automatic Voltage Stabilizer Cao 2 KVA 49 Change over switch 100 AMP 50 Change over Switch 63 AMP 51 Insulation Tape steel Grip 1 inch 52 Electric Gyser 3000 watt 25 Ltr Cap 53 Fuse wire 16A 200 gms Roll 54 Inverter 1100 VA12V 55 Tall Tabular battery inverter 220 Ah 56 Ceiling Rose 57 Wall mounted Fan 58 Casing Caping 3 obliq 4 inch x 6 feet long 59 Water heating Plant Electricall and SK oil Operator Hamam 500 ltr 60 Tube light Square BoxCeling Light

Contract Date: Ref. Documents Contract Value : ₹ 30.67 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 4

Arunachal Pradesh View Result →

24.

Educational and Research Institute #11230155 AOC

Supply, Fixing And Commissioning Of 4 Nos. 1.9Tr Ac Machines (Split Type) Including Necessary Upgradation Of Electrical Network And Fixing Of Timer Switches At Central Library, Medical Centre And Cctv Monitoring Room Within Nbu Main Campus , Supply, Fixing And Commissioning Of4 Nos. 1.9Tr Ac Machines (Split Type) Including Necessary Upgradation Of Electrical Network And Fixing Of Timer Switches At Central Library, Medical Centre And Cctv Monitoring Room Within Nbu Main Campus. , Supply & Fixing 240 V, 25A Modular Starter (Brand Approved By Eic) On Existing Gi Modular Type Switch Board With Top Cover Plate And Making Necy. Connections With Pvc Cu Wire And Earth Continuity Wire Etc. , Supplying & Fixing Gi Modular Switch Board Of The Following Sizes Complete With Top Cover Plate Flushed In Wall For Housing The Board After Cutting The Brick Wall Incl. Making Earthing Attachment, Painting And Mending Good Damages To Building Worksa) 2 Module , Distribution Wiring In 1.1Kv Single Core Stranded Fr Pvc Insulated & Unsheathed Copper Wire (Brand Approved By Eic)In 20Mm Size Pvc Rigid Conduit Fr(Precision Make)Incl Necy. Fittings As Required. A) 2X4sqmm+1X2.5Sqmm. , Finishing Of The Pvc Insulated Wire Ends By Socketing With Pin/Ring Type Copper Sockets And Insulated Tapes Etc.Including Supplying Sockets. A) 2.5 Sq Mm. , B) 4.0 Sq Mm. , Supply & Fixing Of 20/25A Plug Top With Necesaary Connection , Supplying And Fixing Double-Door Spn Mcb Distribution Board With Ip-42/43 Protection, Concealed In Wall After Cutting The Wall & Mending Good The Damages To Original Finish Incl. Inter Connection With Suitable Size Of Copper Wire And Neutral Link & Provision For Earthing Attachment.2+6 Way (Make-L&T Or Equivalent) , Supplying And Fixing 240/415 V Mcb Of Breaking Capacity 10Ka & C Characteristics On Din Rail Of Existing Dbs And Necessary Connection.6-32A Dp Mcb , Supply And Fixing Of 25A Power Contactors 2 Pole, Type- Mnx, Make- L&T, Coil Volatge- 240/415 Vac, Power Rating (Ac3)- 11Kw At 415V, Operationg Frequency- 50Hz, Ambient Temperature Range--5 Deg To +55 Deg, Is/Iec 60947-4-1 & Iec 60947-4-1 , Supply And Fixing Of 25A Power Contactors 3 Pole, Type- Mnx, Make- L&T,Coil Voltage- 240/415 Vac, Power Rating (Ac3)- 11Kw At 415V, Operationg Frequency- 50Hz, Is/Iec 60947-4-1 & Iec 60947-4-1 , Supply, Fixing And Commisioning Ofdigital Timer Having Supply Voltage 110 To 240Vac, Power Consumption (Max)-4Va, Operating Frequency-50Hz, Battery Backup- Approx 6Years Running Resrve Of 20 Degree © Ambient Temp, 3 Line Twxt Lcd Display, No. Of Programs-25 On/Off, Hour Setting- 00-23 For 24H Clock & 00-12 For 12H Clock Mode, Clock Resolution (Medium)- 1 Min, Resets All Programs And Clock Feature, Clock Accuarcy +/- 2S/Day Max Over The Operating Temp Range, Contact Rating- 16A(No) & 5A(Nc) @ 240Vac/24Vdc (Resisteve), Minimum Switching Load- 40Ma At 24Vdc(Make- L&T Crono (67Ddt0) Or Equivalent As Approved By The Eic) , Dismantling The Existing Window / Split Type Rac Machine Carefully From Its Original Locationand Covering This Exsisting Position By Acp/Eboard & Including Carying& Deposited To Store As Instructed By The Eic , Supplying And Fixing Of Copper Pipe (1/2 & 3/4 Inch) Including 4C X 2.5 Cable With Insulation Tube And Rapping Tape For Necessary Connection Of Indoor Unit To Outdoor Unit Ac Machine , Supplying And Fixing Of 3C X 2.5 Cable For Necessary Connection Of Indoor Unit To Power Plug , Supply & Laying Hard/Soft Drain Piping Work Out Of Pvc/Hdpe Hard Pipes Of Following Size Including Fitting, Accessories Upto Ground Level. A) 19Mm Dia , Supply And Fitting The Outdoor Bracket Including Labour, Tools, Tackles, Scaffoldong Etc As Required To Complete The Work In All Respect Withn The Main Campus Of University Of North Bengal. , Supply, Fitting, Fixing And Commissioning Of Single Phase 230V, 50 Hz A.Csplittype Room Air Conditioner1.9 Tr Capacityfitted With Rotary/ Reciprocating Compressor And Copper Pipe With Insulation (Liquid & Suction Line), Copper Cooling Coil, Rated Capacity 6.6Kw, Operating Current (Amps)- 8.2, Volume Of Air (Cfm)- 777 Or Above, Eer (W/W)- 3.57 Or Higher, Star Rating – 2-3 Rated Energy Efficient, Refrigerant Use - 410A, Incl.Remote Etc.Complete With Outdoor Bracket As Per Direction Of Eic(Make:Mitsubishi Electric Or Equivalent As Approved By Eic).Including Labour, Tools, Tackles, Scaffolding Etc. As Required To Complete The Work In All Respect Within The Main Campus Of University Of North Bengal.

Contract Date: Nov 05, 2025 Contract Value : ₹ 3.21 Lakh

Boards / Undertakings / PSU No of Bidders 4

West Bengal View Result →

25.

Housing Urban and Rular Development #11221881 AOC

Contract Date: Sep 23, 2025 Contract Value : ₹ 37.85 Lakh

Government Departments No of Bidders 2

Maharashtra View Result →

26.

Defence #11192596 AOC

Contract Date: May 29, 2026 Contract Value : ₹ 5.74 Crore

Statutory Bodies & Commissions/Committees No of Bidders 3

Ladakh View Result →

27.

Housing Urban and Rular Development #11162283 AOC

Providing the manpower for electrical preventive and breakdown maintenance Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033for the period of 12 months.- 1 Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033 2 Skill Electrician: 03 Nos per day 3 Semi-Skill Electrician: 03 Nos per day 4 Un-Skill Electrician: 02 Nos. per day 5 Semi-Skill (Lift Operatror cum Attendent): 02 Nos. per day 6 SCOPE OF WORK:-1. The Scope of maintenance of electrical installation includes Routine, Preventive and Corrective Maintenance of L.T. Distribution lines to each floor of all the buildings/ blocks, entire wirings, BDB, PDB, VTPN, LT panels, Feeder Pillar Box, power & distribution cables, fittings & fixtures, Switch Boards, Power and Computer Points, Power outlet of all sorts of Air-conditioning Systems,resetting/ Switching off of Fire detection system during normal operation/ malfunctioning etc., Operation, configuration & repair / replacement of Timers for AC / Compound light, Compound Lighting including high mast, all glow sign and metal sign boards in the campus, Electrical Installations/ distribution up to Switch Board/ Panel of Lift Machine Room & Pump Room and / or Kiosk of Pump for Water Supply system, in the premises of above mentioned site. 7 2. Cleaning & checking of all the fittings & fixtures, Panels, TPN & SPN DBs, SFUs & other Electrical Installations, as well as the Compound Light installations in a regular interval to keep them in a tip-top condition at the cost of the agency and the same must be recorded in log book.3. The checking & repairing of the different types of light fittings, ceiling fans, exhaust fans etc. has to be done by the agency at his own cost (except rewinding of ceiling fans and exhaust fans) including dismantling and re-fixing of the same. (Major materials to be supplied by department). Especially, all the ceiling fans of entire worksite are to be inspected, at least once in 3(three) Months, in respect of Split Pin, Jam nut etc. to prevent unwanted falling of Ceiling Fans, failing which responsibility will be fixed up upon the agency. Split Pin, once taken out from the installation should not be re-used under any circumstances. Required number of Split Pin and Jam nut should be provided by the agency at their own cost. Building wise Fan register should be maintained as per Performa provided by the department, wherein each and every details of checking, replacement of spares, repairing etc. should be recorded against individual fan and every record should be signed by the attending Electrician / responsible person of the agency, duly countersigned by the concerned J.E. and A.E. 8 4. Measuring of various electrical parameters e.g. Current, Voltage, Temperature of different L.T. panel board, BDBs, Main switches etc., test of Insulation Resistance, Earth Resistance etc. are to be carried out every month and test results are to be recorded in Log book (preventive maintenance). Thermal Imaging Scanner should be used for measuring temperature of electrical equipment regularly to find out any abnormalities and printout of thermal image with date and time stamp should be provided to the concerned J.E. and A.E. In case, any abnormal reading is noticed, the same should be rectified/set right immediately by taking prompt, appropriate & effective measures/actions in consultation with concerned AE&JE. Thermal image should also be taken after rectification. The engaged agency will supervision overall maintenance works and examine Logbooks for any abnormality and sign the Logbook accordingly5. Switching On/Off of the common service lighting e.g. compound, corridors, staircases etc. and AC machines, Light, Fan etc in closed room like Library, Store, OPD, OT or these are not run beyond Office hours or off day will be the responsibility of the agency. 6.Cleaning of Sub-station rooms,LT Panel rooms,operation of HT switch gear & resetting the protective rekeys in case of any fault occurred will be the responsoibilty by the agency . 9 7. Operation of DG sets & checking and maintenance of AMF panel, Checking of Battery, checking of fuel level of DG Set, Lubricating oil etc, carrying & pouring of Fuel if necessary and maintaining separate log book for DG Set as per given Proforma. For Operation of DG Sets, experienced and skilled operator should be provided8.Llift operation cum attendent including regular cleaning of lifts etc as per direction of EIC.9. Regular dusting and cleaning of fire detection sensors and others parts including reset of fire alarms. 10 TERMS & CONDITIONS:-1. The agency has to depute manpower as directed by the EIC carrying out the maintenance work smoothly with due regard to the safety.Category of Staff:- i) Skilled Electrician --03 (Three) Nos per day ii) Semi-Skill Electrician--03(Three) Nos. per day iii) Un-Skill Electrician: 02 Nos. per dayiv) Semi-Skill (Lift Operatror cum Attendent): 02 Nos per day 11 2. The Maintenance Personnel, deputed by the agency havingvalid Voter Identity/ Adhaar Card and should possess valid Workman Permit/ License, as mentioned below, issued by Directorate of Electricity, Govt. of West Bengal.Category of Maintenance Personnel Mandatory Requirementa. Skilled Electrician Having Electrical/ Workman Permit i(b), ii & iv issued by Directorate of Electricity, West Bengal.b. Semi-Skilled Electrician Workman Permit i(b) and (ii) issued by Directorate of Electricity, West Bengal.c. Un-skilled Personnel/ Helper Basic knowledge of Electrical works.Also the Superviser of the company should have valid SCC Parts 1,2,3,4,5,6A,7A,7B ,9,11,12. 12 3. Agency must have to submit mandatorily the list of staff mentioning their Name, contact Mobile No., category, along with photo copy Valid Workman Permit, proper identity and address proof etc, in writing to the concerned JE & AE before commencing the work. All the photocopy should be attested and authenticated by the Agency.4) The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the Maintenance Staffs deployed including substitutes.They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE.5) The agency will maintain shift wise attendance register at call center to record the attendance of the staffs on duty which will be authenticated/ verified by the concerned Junior Engineer/ Officer- in-charge. 13 6) The agency shall have to prepare a Duty Roster of the Maintenance Staffs at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE and one copy should be available at the call centre.7)The agency will have to provide proper uniform for his maintenance staff at his own cost and clour of the dress will be decided by the EIC. No staff will be allowed for performing duty without proper uniform. 8) The agency, and all the electricians deputed at worksite must have Mobile Nos. and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay. 14 9) The agency has to provide one GPS activated smart phone dedicated for call center. The cost of the handset and running cost i.e. phone bills have to be borne by the agency. No claim of payment against any telephone bill will be entertained by this department.10) The agency should have a close watch on the attendance of the Maintenance Staffs. In case of absence of any Maintenance Staffs, the agency shall have to arrange for suitable alternative within an Hour, failing which, the charges for that day will be deducted from the bill of the agency on pro-rata basis.The Executive Engineer,Electrical Constrution Division ,P.W.D. reserves the right to terminate the contract in case of absence of Maintenance Staffs for more than three consecutive days, without showing further reason. 15 11) In case of any Accident and or physical illness of the staffs of the agency, while on duty, no claim will be entertained by this department and all responsibilities thereof should be shouldered by the agency only. Minimum wages as per existing Labor Act should be paid to the Electrician(s) and Helper(s)12) The agency shall have to provide 500V Megger, Digital Multi meter, Earth tester and all other requisite tools and tackles sufficient for checking, testing and recording of health of all electrical installations. Other tools & tackles e.g. Crimping Machine, Line Tester, Screw Driver, Pliers, Stripper, Sockets of some common sizes etc. should also be available at site, in sufficient quantities, free of cost, under disposal of their maintenance staff.Deployed employee by the agency should have sufficient knowledge to operate The Thermal imaging Scanner or to be used by the direction of Assistant Engineer/ Junior Engineer.13) The space for sitting accommodation for the staffs of the agency inside worksite premises will be provided by the competent authority. 16 14) All the maintenance staff of the contractor should have proper & constant vigilance and check that, there is no sign of heating-up, burning smell, discoloration or sparking at any of BDBs, panel boards, rising main etc. due to overloading or loose termination. Care should be taken to check any highly unbalance in loading at any point.15) In case of power failure or development of any unfavorable situation the agency will have to communicate with the concerned Power Supply Company authority and extend help or cooperation to said authority in restoration of power supply. Meanwhile the agency will have to operate the switching mechanisms of interconnections among available sources at suitable locations to maintain power supplies at important locations by monitoring and/ or restricting electrical loads in consultation with the concerned Junior Engineers & Assistant Engineer.16) Routine checking and preventive maintenance and breakdown maintenanceof the electrical installations has to be carried out by the agency maintaining a register under signature of respective Junior Engineer and Assistant Engineer with a view to ensure uninterrupted power supply within worksite campus. 17 17) Materials required as replacement during maintenance of electrical installations e.g. Lamps, SFUs, SPNDB, TPNDB, Cables etc. will be supplied by the Department for which requisition of Materials, signed by the authorized representative of the agency, should be submitted to the concerned JE (Electrical) well in advance. A separate material stock register should be maintained by the agency where entries related to Issue, Consumption & present stock position of Materials should be made. However auxiliary items like fuse wires, screws, nuts, bolts, washers, insulating tape, Split pins of Ceiling Fans, dusters etc. will have to be supplied by the agency at his/ their own expense.18) The agency shall have to deposit all dismantled unserviceable materials such as fused lamps, defective condensers, starters, and timers, MCBs etc. to the concerned Section Office or any other locations within worksite premises by the agency by its own laborers / arrangements / tools and tackles as per the direction of the Assistant Engineer/ JE concerned. Fresh materials will be issued against respective defective materials. No materials should be taken out of the maintenance site without the permission and necessary challan of the site-in-charge/JE 18 19) Any major shut down or fault should be brought to the notice of JE/AE immediately in writing and over telephone for further course of action. The agency will also have to attend emergency calls immediately at the site with staff, tools etc. on demand. 19 20) In case of any breakdown caused by cable fault etc., if situation demands the agency will have to restore the power supply temporarily either with the materials available with this department or arranging the same temporarily and safely at his own cost till completion of original restoration work.21) Building wise Log book is to be maintained for Preventive Maintenance & Cleaning and Corrective Maintenance of Electrical equipment except Fan as per direction of E.I.C. Separate Building wise Register is to be maintained for Ceiling Fans. The daily record of the Log book is to be signed by the responsible person and verified & signed by concerned JE & AE and photocopy of the same should be sent to the Executive Engineer concerned through proper channel at the time of submission of bills. The Logbooks should be available at Call center and should be produced on demand. 20 21) The agency should be responsible for any damage in the installation due to mishandling or mal- operation by its staff and shall be liable for rectification / replacement, as the case may be, of the damaged installation/ equipment within time frame to be fixed by concerned A.E., failing which the said rectification/ replacement of affected equipment/ installation would be executed by external agency and the cost thereof would be recovered from the bill and the accused staff should be replaced immediately.22) Bills should be submitted quarterly with the certification of satisfactory performance of the concerned JE and AE. Photocopy of Logbook and Attendance Register should also accompany the Bill. Payment should be made as per PWD norms. 21 23) Any fault of electrical installations starting from LT supply end (except the installations of Power Supply Company) to light, fan, call bell, plug points etc. i.e. LT cables and all sub-panels, distribution boards, main switches, earthing attachments, compound lights etc. has to be detected, attended and restored by the agency by its own man power with the help of the materials(cables, main switches, DBs, wires, HRC fuses etc.) available from this department or as per the terms & conditions of this contract. 24) If any kind of incapability & negligence are noticed in observing all the above-said terms & conditions causing inconveniences to public service, is subject to unilateral penalty, be it detected on the spot or thereafter (even after payment). This Department also reserves the right to deduct the cost from the bills of the contractor on pro-rate basis as determined by the Engineer –In-Charge for any shortfall in observing above T&C. In that case, the above- said contract may be terminated without issuing any notice and Stringent & punishable action may be taken against the contractor. 22 25) The technitian of the agency should capable of Casing -caping /rigid conduit wiring to overcome the emergent situation .25) The contract may be terminated with one months’ notice on either side (both agency and tender awarding authority) . 26) At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .27) Any upcoming / Ongoing project, which will be completed within stipulated period of Maintenance contract, automatically will come under maintenance contract .28) All the log-books should be available at the call center and to be produced to the Office of the AE/ JE on demand. 29) This Maintenance contract covers all the buildings, blocks, outdoor electrical gadgets within the premises ofTechnician Studio, Kolkata-700033 23 TERMS & CONDITIONS FOR OPERATION OF LIFTS:- 24 1. The agency has to depute manpower as directed by the EIC carrying out the lift operation smoothly with due regard to the safety.Category of Staff:- Semi-Skill (Lift Operatror cum Attendent): 02 Nos. 25 2. Day to day Attendent -cum -operation of passenger lift foras directed by the EIC.3. The lift operator/attendant should have a sound knowledge with valid lift operator license issued by the Licensing Board, Govt. of West Bengal.4. The operator/attendant should be obliging dutiful and polite to all while on duty. In case any irregularities of duty or complain against the operator/attendant if noticed, would be withdrawn forthwith and shall be replaced by new operator.5. The report is to be submitted periodically about the working of lift incl. all safety devices and Governor to the concerned JE/AE. 26 6. Agency must have to produce the list of the staff mentioning their Name, contact Mobile No.in writing with proper identity and address proof & their Valid lift operator license issued by the Licensing Board, Govt. of West Bengal along with photo copy to the concerned JE & AE before commencing the work. This should be treated as mandatory.7. The agency will have to provide proper dress for his staff and color of the dress will be decided by this department. No staff will be allowed for performing duty without proper dress.8. The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the operation Staffs deployed including substitutes. They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE 27 9. The agency shall have to prepare a Duty Roster of the operation Staff at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE.10. The agency must have separate contact telephone numbers with Mobile Nos. for his office and Supervisor deputed at worksite so that the agency may be communicated in case of any urgency and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay.11. The lift enclosure to be kept clean (not sweepers works) regularly by the operator 28 12. The operational work of the lift is to be supervised directly under the supervision of technical staff of the contractors under the direct control of JE/AE concerned. The contractor shall be responsible for any damage to the lift due to mishandling; loss will be recovered from the contractors bill as per direction of EIC.13. The Log Book recording regarding functioning and breakdown of the lift is to be maintained at site by the contractor under supervisions of JE concerned. If any kind of trouble arises, it should be brought to the notice of JE, AE concerned immediately. The JE/AE would put their signature on log book making note on performance. 29 14. In case of any absence of operator, the lift is to be made operative within 2 hours by placing the new operator. In case of absence prorate deduction will be made from the contractors bill and the contract may be terminated if it exceeds 3 (three) days. In this respect Executive Engineer’s decision will be final.15. This department would not be held responsibility for any accident of the liftman on duty for any reasons. The contractor or their lift operators on duty would not claim any compensation in any shape from this department for such accident. 30 16. The Executive Engineer,Electrical ConstructionDivision, P.W.Dte. would have sole authority to cancel the contract without assigning any reason with a notice of one month only.17. Any conditional quotation offered would not be accepted.18. Any quotation offered with price variation clause would not be accepted.19. The payment will be made monthly/quarterly on submission of bill in triplicate by the agency with satisfactory report regarding performance by the concerned JE/AE. Copy of log book has to be enclosed with the bill. 31 20. Persons entrusted by the agency for operation of lift should wear photo Identity Card during duty hours.21. Documentary evidence in support of payment of minimum wages as per Labour Act to be produced to the Principal Employer i.e. Executive Engineer, Electrical Construction Division, P.W.Dte. in-charge of works.22. Rescue operation is in the scope of agency in case of exigency arises out of lifts getting stopped in between landing floors with passengers inside cage.23. No claim towards cost of uniform, PPE e.g. Hand Gloves, Mask, Goggles, protective body- ware etc. for the maintenance staffs should be entertained by this department. However, if any such equipment/ dress is available from the Hospital Authority for their statutory requirement, the same would be provided. BUT IN NO CASE IT SHOULD BE ENTERTAINED AS MANDATORY CLAIM.24.At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .

Contract Date: Mar 09, 2026 Contract Value : ₹ 14.46 Lakh

Government Departments No of Bidders 4

West Bengal View Result →

28.

Public Administrative Department #11144771 Technical Bid

Tender for Supplying Backhoe With Bucket And Front Loader Machine At Nagar Parishad Manasa , Backhoe With Bucket And Front Loader Machine At Nagar Parishad Manasa: Hdt Bs- V Performance Values Dump Height 2.91 Mtr. Load Over Height 3.37 Mtr. Max. Reach At Full 1. Mtr. Reach At Ground 1.58 Mtr. Reach At Full Height - 0.90 Mtr. Pay Load Capacity 1650Kgf Pin Forward Reach 0.41 Mtr Rollback At Ground 43 Degrees Dump Angle 41 Degrees Bucket Capacity 1.0Cum(Multi Functional) Excavator Specification Dig Depth 5.05 Mtr. Load Over Height 4.35 Mtr. Working Height 6.01 Mtr. Overall Width 2.39 Mtr. Overall Height 3.90 Mtr. Operating Weight 8010Kg Wheelbase 2.24 Mtr. Bucket Tear Out Force 5959 Kgf Dipper Tear Out Force 3257 Kgf Bucket Capacity 0.30Cum Bucket Width 0.82 Mtr. Generic Specification Hp Category Crdi 55Kw Stage 5 Engine, 4 Cylinder, Water Cooled,Turbocharged With Egr And Aftertreatment System Doc And Dpf. Hp At Rated (74 Hp) @ 00 Rpm Type Bs V Crdi Engine No. Of Cylinder 4 Aspiration Natural Displacement 3.0 L Transmission & 4Wd Max Torque(Nm) 440 Nm Main Brake Dry Disc Brake/Oil Parking Brake Hand Operated Disc Steering Type Power Steering Hydraulic- Pump Capacity 114Lpm Battery 12V,130Ah Electricals Ip 69 Certified Dust Front Tyre 12.5 X 18 - Rear Tyre 14X25 -20Pr Wheel Base (Mm) 2.24 Mtr Overall Length 6.10 Mtr Overall Width 2.23 Minimum Ground 260 Milimeter Fuel Tank/Type 128 Lts. Air Filter Auto Cleaning High Change Engine Lube/Filters Live Link Advance Telematics Monitoring System That Enables You To Monitor And Manage Your Machines Remotely By Providing Information On Service, Operation & Attachment Options Machine Has Attachment Facility Of 15 Plus

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 1

Madhya Pradesh View Result →

29.

Health and Family Welfare #11109582 AOC

Contract Date: May 19, 2026 Contract Value : ₹ 3.76 Crore

Boards / Undertakings / PSU No of Bidders 27

Kerala View Result →

30.

Defence #11097521 AOC

Contract Date: Jun 20, 2026 Contract Value : ₹ 6.14 Crore

Statutory Bodies & Commissions/Committees No of Bidders 9

Ladakh View Result →

31.

Educational and Research Institute #11093693 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 4

Rajasthan View Result →

32.

Public Administrative Department #11047153 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Trust & NGO No of Bidders 2

Maharashtra View Result →

33.

Health and Family Welfare #11036404 AOC

NOTICE INVITING RE E-TENDER FOR PROCUREMENT OF SOME CONSUMABLE ITEMS FOR TWO YEARS FROM THE DATE OF AWARD OF CONTRACT (AOC) Group-I Re E-Tender For Procurement Of Some Consumable Items For Two Years From The Date Of Award Of Contract (Aoc) , Cardiac Catheter Introducer Sheath With Needle ( Radial)- 4Fr/5Fr/6Fr, Sheath Length -7.0Cm. Sheath Wire-0.025Cm * 45Cm , Cto Coronary Angioplasty (Ptca)Guide Wire Wires: Subcategories With Different Tip Loads: Hydrophobic/Hydrophilic , Hydrophilic Guide Wire, Nitinol Core With Hydrophilic Coated, Standard Exchange Length-260 Cm, Straight Tip & “J”, Dia-0.18 “ To 0.38” , Transvenous Temporary Pacing Catheter. Size : 5,6 & 7Fr. • Should Be Wovan Dacron Constructed Catheter. • Platinum Tip Electrode Lead. , Plasma Filter For Plasmapheresis , Epidural Kit For Paediatric : Complete Epidural Kit Wit Epidural Catheter 72Cm/90Cm & 24G/22G Made Of Polyamide + Plyurethane Having 3/6 Lateral Eyes, 3 Embedded Line For X Ray Visibility, Tuhey Needles, 0.2 Micron Filter, Lor Syringe And Pin Pad. , Catheter Double Lumen Internal Jugular Curved/Straight 10Fr. , Catheter. Umbilical Catheter { For New Born } All Size,With Female Flexible Mount ,Open Tip Should Be Soft, Rounded,Atraumatic ,Length 40 Cm , Dialyzer High Flux (F60s/Hf80s/Hdf100s) For Hdf Specification : 1. Surface Area-1.3M2 To 1.8M2 2.Blood Priming Volume-80 Ml To 110 Ml. 3. Uf-Co-Efficient-40Ml/Hr/Mmhg To 55Ml/Hr/Mmhg 4. Maximum Tmp-500 Mm/Hg To 600 Mm/Hg 5. Dialyser Membrane-Polysulfone 6. Sterilization Method-Inline Serilization , Dialyzer Single Use For Sero Positive (Low Flux Dialyzer) Specification : 1. Surface Area-1.3M2 To 1.6M2 2.Blood Priming Volume-64 Ml To 90 Ml. 3. Uf-Co-Efficient-12Ml/Hrs/Mm Hg To 16Ml/Hrs/Mmhg 4. Maximum Tmp-500 Mm/Hg To 600 Mm/Hg 5. Dialyser Membrane-Polysulfone 6. Sterilization Method-Inline Steam Sterilization , Ventriculo Peritoneal Shunt (Medium Pressure) In Sterile Pack , Knitted Polyester Fabric Patch, Size – 4” X 4”. *Thickness Should Be - 0.61Mm,*This Metarial Patch Graft, Endarterectomy Procedures And Asd / Vsd Repair. , Mouth Mirror Small Head , Hand Scaler Set Of 5 Piece , Tweezer Dental (Sizes No. 2) , Pediatric Extraction Lower Incisors & Canine Forcep , Plaster Spatula , Root Canal Explorer Stainless Steel (Cow Horn Design) , Spirit Lamp , Upper Canine Extraction Forcep English Pattern , Upper Incisor Extraction Forcep English Pattern , Upper Molar Extraction Forcep English Pattern , Warwick James Elevators , Surgical Elevators- Cryer’S Pattern , Mouth Mirror With Handle , Renal Stent -4,5,6 & 7Mm.• Stent Base Should Be Cobalt Chromium.• Should Be Rapid Exchange Delivery System (0.014” / 0.36Mm)• Should Be Shaft Size 80 & 120 Cm. , Silver Ion Impregnated Or Hydrophilic And Benzalkonium Chloride Impregnated Triple Lumen Central Venous Catheter : Triple Lumen Pur Catheter, Polymerized With Biguanide Materials Having Antimicrobial Efficacy, Nitinol Guidewire, Valve Needle & Safesite Connector For Needle Free Injection. , Microscope, Binocular, Complete With 2 Eye Pieces And 3 Or 4 (Scanner) Objectives Including Oil Immersion Is: 4381 Along With Is:15269, Is: 8725 And Is: 15268 , Disposable Suction Pod Stabilisation System For Cabg, The Pod Should Rotate 3600 , Basic Set – Procedure Pack Contains Essential Items Needed For A Number Of Common Procedures Including Lumber Puncture, Spinal Anaesthesia, Epidural Anaethesia, Liver Biopsy, Paediatric Surgery, Oncology Etc. (Also Offers Custom Made Service) I. Tray Ii. Syringe Luerslip Iii. Aperture Drape Iv. Galipot V. Prep Forceps Vi. 4 Ball Swab (Small) Vii. 2 Ball Swab (Large) Viii. 1 Filter Needles 5 Um Ix. 3 Hypodermic Needles 18G, 21G & 25G X. 1 Outer Wrap 75 X 70 Cm Xi. Absorbent Towel 33 X 38 Cm , Disposable Fluid Warmer Tubing, * Blood And Iv Fluid Warmer Set With Injection Port. , Ear Speculas Specification : A. Troeltschs Ear Specula, Adult Size, Set Of 3. B. Troeltschs Ear Specula, Infant Size, Set Of 3. , Mono Leaflet Mechanical Prosthetic Mitral / Aortic Valve With Elevated Pivot Guards • Mono Leaflet Rotatable Or Tilting Disc Rotatable • Swing Ring Hence-25 Alloy • Disc Made Of Uhmpe • Swing Ring Made Of Polyester , Pin Index Valve For O2 And N2o For Anaesthetic Apparatus , Positive Airway Pressure System : 1. 22Mm Od Patient End To Accommodate Mounthpiece. 2. Scalloped Ambient Air Inlet With Gaps To Resist Occlusion. 3. Pressure Port With White Sealing Cap, To Allow Connection To A Gauge For Easy Monitoring. 4. Gas Inlet Port To Allow Connection To O2 Source With A Flow Meter. 5. Can Be Used In Conjunction With Aerosol Medication (E.G Nebulizer) Via 22Mm Connection. 6. Available With A Disposable Manometer. 7. Transparent Design For Visual Monitoring Of Contaminants. , Ultrasound Therapy Unit (Two Heads) Technical Specification : Frequency Of 1 & 3 Mhz Intensity Of 0-3 W/Cm2 With Display Of Output Parameters Along With Timer And Two Water Proof Treatment Heads, One Large To 5 Cm Second Small Up To 1.0 Cm System Configuration Accessories Spares And Consumables : - All Standard Accessories Desired For Proper Functioning Of The Machine Jelly As Per Requirement. , Cannula, Femoral Venous Cannula : Kink Resistance Thin Wall, Radio Opaque Bodies With Multiple Side Holes. Depth Markings Permit Precise Positioning Of The Cannula With A Tapered Tip Dilator Which Facilitates Insertion Over 0.038 In. ( 0.1 Cm ) Guide Wire. Size : Assorted, 21 In. (53.3 Cm) Overall Length 25.5 In. (64.8 Cm) Overall Length. , Corrugated Rubber Sheath Drain , Disposable Ventilator Heated Wire Circuit With Water Chamber. Should Be Tidel Volume Range From 200 Ml To 1500 Ml. Should Be Minimal Deade Space 55 Ml. Medical Grade Pe. Connector 15/22 Mm M/F For Y Piece, Connector 15/22 Mm M/F For Ett & Mask. Standard Length. 6Ft. Or Expandable Length. , Oximetry Cable For Cco Monitor (Reusable) , Supraglottic Airway Device 2Nd Generation Specification : 1. Cuff-Should Be Made From Soft Gel Like Material ( Medical Grade Thermoplastic Elastomer) That Should Create A Non-Inflatable, Anatomical Seal Of The Pharyngeal, Laryngeal And Perilaryngeal Structures. 2. 15 Mm Connector. 3. Position Guide 4. Gastric Channel / Drainage Port. 5. Bite Block 6. Buccal Cavity Stabilizer 7. Epiglottis Blocker 8. Display Of Size – For Quick, Easy Reference And Weight Guidance. 9. Can Be Used As A Conduit For Intubation. 10. Size 1,1.5,2,2.5,3,4,5. , Platinum Chromium Coronary Stent System , Important Note: 1. All Prospective Bidders Are Requested To Quote The Rate In Boq As Per Accounting Unit (Au) Repeat As Per Accounting Unit (Au) & Item Specifications As Mentioned In The Table-1. Wrong Quoting Of The Rate In Boq Will Be Dealt With As Per Penal Provisions Of The T&C Of The Tender. 2. Quality Of The Product Supplied, May Be Ascertained By Testing / Physical Examination By The Experts At Any Stage Of The Tender Period. 3. The Equipment Should Be Us Fda/ Ce/ Bis/ Cdsco Approved (Us Fda/ Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/ Cdsco Is Not Available). 4. The Prospective Bidders Of The Said Tender Are Requested To Make A Declaration In Affidavit Under Annexure Vi(B)In Case Of Sole Manufacturer/Importer (I.E. Proprietary In Nature). 5. If The Item(S) Under Sole Manufacturer / Importer Is (Are) Proprietary In Nature, Quarterly Intimation Is Solicited From The Approved Bidders Positively Regarding The Status Of Their Item(S) Proprietary In Nature, Otherwise Their Item(S) Will Be Blocked In The Smis. 6. In Case Of Tie Bid, Decision Will Be Taken By The Tia As Per G.O. No. 2320-F(Y), Dated 07.06.2022 Issued From Finance Department Audit Branch (Group T).

Contract Date: May 08, 2026 Contract Value : ₹ 14

Government Departments No of Bidders 25

West Bengal View Result →

34.

Health and Family Welfare #10973438 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 12

Himachal Pradesh View Result →

35.

Educational and Research Institute #10967168 AOC

Contract Date: May 05, 2026 Contract Value : ₹ 7.71 Crore

Government Departments No of Bidders 1

Assam View Result →

36.

Educational and Research Institute #10910485 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Kerala View Result →

37.

Chemicals and Fertilizers #10904912 AOC

Contract Date: Ref. Documents Contract Value : ₹ 58.63 Lakh

Government Departments No of Bidders 4

West Bengal View Result →

38.

Housing Urban and Rular Development #10897894 AOC

Tender for Annual Maintenance Estimate Of 5 Mld Stp At Narnaul, Providing Online Water Quality Monitoring System (Extractivetype)Cpcb Approved | Tuv Certifiedmulti-Parameter Analyzer For Ph, Bod, Cod, Tss, Flow Detailed Specification:• Sample Flow: Recommended 0 - 5 L/Min Ensuring Stable And Continuous Sample Supply For Accuratemonitoring. • Optical Technology: Uv254 Spectroscopy With Advanced Double-Beam Full Spectrum Analysis Forprecise Detection Of Organic Load. • System Designed For Continuous, Real-Time Monitoring To Comply With Pollution Control Normsand Online Portal Connectivity. • Analyzer Ensures High Accuracy, Long-Term Stability,And Minimal Manual Intervention With Automatedcleaning Mechanism. Etc At Stp Narnaul And All Other Works Contingent Thereto

Contract Date: Apr 28, 2026 Contract Value : ₹ 4.05 Lakh

Local Bodies No of Bidders 3

Haryana View Result →

39.

Housing Urban and Rular Development #10889945 AOC

Contract Date: Ref. Documents Contract Value : ₹ 38.05 Lakh

Government Departments No of Bidders 4

Delhi View Result →

40.

New and Renewable Energy #10888928 AOC

Bids Are Invited For Ffd1 Aac Input Fuse Fail Detector Circuit, Mt 111, 415V12v Dc , Con101 A 3 Pole Ac Input Mains Contactor, Mnx 70 Cs97076booo,63A,230V Ac70a , Tr2a Control Transformerclass B Insulation With Temperature Rise Class A 415240V Ac, 500Va , Converter 1A,2A Ac To Dc Converter,Lrs 100 48 , Ip230vac, Op 48V Dc2.3A , Tr1a Three Phase, Double Wound, Impregnated Naturally Air Cooled, Mains Transformer Class H Insulation And Temperature Rise Limited To Class F, Input Power Transformer,32.15 Kva, 45670V, 70V , Ipt 1Ainter Phase Transformer,0.65Kva , Ffd2a 3A, Rectifier Fuse Fail Detector Circuit Modified For Latching Facility Using One Extra Relay And Pb Mounted On Same Pcb Card Used For Trip Function, Mt 111,70V Ac, Aux. Supply 12V Dc , Mr1a 2A3 Phase, Full Controlled, Full Wave Rectifier Bridge Comprising Of Scr With Heat Sink And Surge Suppression Networkt250e160,Scr170a1600 Piv, 250A1600 Piv , Df A Free Wheeling Diode,150Nd160,150A1600piv , Ffd5a Free Wheeling Diode Fuse Fail Detector Circuit Modified For Latching Facility Using One Extra Relayand Pb Mounted On Same Pcb. Card Used For Trip Functionmt 111,48V Ac, Aux Supply 12V Dc , Rc Pcb,Mt 116 , Ch1a, Filter Chokedc Choke , 48325A , Ffd 4A, Filter Capacitor Fuse Fail Detector Circuit Modified For Latching Facility Using One Extra Relayand Pb Mounted On Same Pcb. Card Used For Trip Functionmt 111,48V Ac, Aux Supply 12V Dc , Cpc1a 2A,3 Phase Full Controlled Card With Green Connector6 Pulse ,Mt 103,48Vcv Cc , Hvandpfpsr Card 1A 2A,High Voltage And Phase Failphase Reversal Circuit With Control Transformer 456V18 0 18V, 50Va,Mt 105,415V Ac , Dc Ov 1A,Charger Dc Over Voltage Circuit Of Solid State Sensing Type With External Rl Card Including 1K Ohm50w Resistor,Mt 106 Actuating Voltage 54.5V , Resettingvoltage53v , Dc Ov 2A,Charger Dc Over Voltage Circuit Of Solid State Sensing Type With External Rl Card Including 1K Ohm50w Resistor,Mt 106 Actuating Voltage66.5V ,Resettingvoltage 65V , Mr3a,Charger Silicon Blocker Diode2nos. In Parallel ,250Ng160,250A1600 Piv , Cb 901A3 Pole Moulded Case Circuit Breakermccbfor Dc Output Including Aux Switch For Cb901a And Shunt Trip Coil Du400ncm98402ooro ,400A, 15Ka 50Ka ,Suitable Range 0.81 , Clc 1Abattery Current Limiting Circuitmt 110,240V Ac, Act 45A , Load On Batt1a,Battery Current Sensing Circuit For Battery On Load Alarmmt 110,12 V Dc, Act 8A - Load On Batt1a,Battery Current Sensing Circuit For Battery On Load Alarmmt 110,+12 V Dc, Act 8A , Load On Batt2a,Battery Current Sensing Circuit For Battery On Load Trip Function,Mt 156, 12 V Dc, Act 10A - Load On Batt2a,Battery Current Sensing Circuit For Battery On Load Trip Function,Mt 156,+12 V Dc, Act 10A , 12V Ps 3 4A12v Power Supply For 12V Control Supplyurb4812ld 30Wr3a4s,Ip 18 75Vdc Op 12Vdc2500ma , Mcu1001a1 1A,Monitoring And Controlling Unitmcu ,20 80V Dc , Annunciator 1A,12 Window Annunciator With Labels,Ae48260vacdcdw04sw08rs485,Aux. Sup 48V Dc ,With Rs485 Output , Batt Uv 1Abattery Under Voltage Circuit Of Solid State Sensing Type Including 1 K Ohm 50W Resistor ,Mt 106 Actuating Voltage43.7 V,Resettingvoltage 45 V , 24V Ps 1C 2C,24V Power Supply For Con 901 902Of Standby Charger ,Lrs 150 24,24V Dc , Con 901, 901N, 1 Pole Dc Contactor With 1 No Aux.Evd400g1da4 ,400A, 12 36 V Dc Coil , Ol 1A, Thermal Over Load Relay For Contactor, Range 30 50Amnx 50 Ss94136oogo Mn5 Total Quantity : 79

Contract Date: Ref. Documents Contract Value : ₹ 13.48 Lakh

Government Departments No of Bidders 1

Tamil Nadu View Result →

41.

Health and Family Welfare #10835720 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Rajasthan View Result →

42.

Information and Broadcasting #10811892 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Tamil Nadu View Result →

43.

Educational and Research Institute #10771122 Price Bid

Supply Of Drone With Multi Spectral Sensor Under Dst Fist Fund For Agronomy Department , Drone With Camera And Accessories For Crop Monitoring Studies , Quad Copter Drone A) Vehicle Mass: 1.5-2.5 Kg (Including Pay Load) B) Texture Of Material: Carbon Fiber Frame C) Max Flight Time: 40-50 Minutes D) Launch & Recovery: Vertical Take-Off And Landing E) Flight Speed: 40Km/H F) Max Control Radius: 5 Km G) Rtk Positioning Accuracy: 1Centimeter + 1 Point Per Minute Horizontal & 1.5 1Centimeter+ 1 Point Per Minute Vertical H) Intelligent Flight Battery: 5800-6000 Mah, I) Max Altitude: 2000M Above The Departure Point J) Operating Temperature: -20°C To 45°C K) Two Additional 5800-6000 Mah Batteries Should Be Supplied , Rgb, Multispectral Cameras A) Resolution Of 2 Cm At 60M. B) Minimum Five Spectral Bands (Blue, Green, Red, Near-Infrared (Nir), And Red-Edge Bands) For Multiple Vegetation Indices And Composites. C) New Professional Removable Storage Standard In Cf Express, D) Enabling Up To Three Captures Per Second For Faster Flight Speeds For Cutting Down On The Time Required To Map An Area. E) Electrical And Mechanical Interfaces Compatible With Existing Installations With A Connector Upgrade

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Puducherry View Result →

44.

Educational and Research Institute #10766469 Price Bid

Supply Of Wifi Instruments Items , Wifi Items , Tp-Link (Eap110-Outdoor) Omada N300 Outdoor Wireless N Access Point 300Mbps Wi-Fi Waterproof, Dustproof, Lightening Protection, Passive Poe, Free Managing Software Ideal For Outdoor Environment: Ip65 Weatherproof Enclosure For Outdoor Wi-Fi Applications, Fast Wi-Fi: Up To 300Mbps Wi-Fi With 2×2 Mimo. Long- Range Coverage: Dedicated High-Power Amplifier And Professional Antennas 200Mts. Integrated Into Omada Sdn: Centralized Cloud Management And Intelligent Monitoring. Centralized Management: Cloud Access And Omada App For Ultra Convenience And Easy Management. Poe Support: Supports Passive Poe (Poe Adapter Included) For Convenient Deployment. Secure Guest Network: Along With Multiple Authentication Options (Sms/Facebook Wi-Fi/ Voucher, Etc.) And Abundant Wireless Security Technologies. Concurrent Clients: 100+*** , Tp-Link Er605 (Tl-R605) | Multi-Wan Wired Single Band 1000 Mbps Vpn Router, Integrated Into Omada Sdn: Zero-Touch Provisioning (Ztp), Centralized Cloud Management, And Intelligent Monitoring. Centralized Management: Cloud Access And Omada App For Ultra Convenience And Easy Management. Five Gigabit Ports: High-Speed Wired Connectivity. Up To 4 Wan Ports: 1 Gigabit Wan Port And 3 Gigabit Wan/Lan Ports With Load Balance Raise The Utilization Rate Of Multi-Line Broadband.Highly Secure Vpn: Supports Up To 20× Lan-To-Lan Ipsec, 16× Open Vpn, 16× L2tp, , Tp-Link Tl-Sg1218mp 16 Port Gigabit Poe Switch 16 Poe+ Ports @250W, W/ 2 Uplink Gigabit Ports + 2 Combo Sfp Slots Plug & Play Sturdy Metal Rack- Mountable, The Tp-Link Tl-Sg1218mp Is A Robust 16- Port Gigabit Poe+ Switch Designed For Demanding Network Environments. It Offers 16 Gigabit Ethernet Ports, All Supporting Poe+ (802.3At) With A Substantial 250W Total Power Budget, Making It Ideal For Powering Numerous High-Power Poe Devices Such As Ip Cameras, Wireless Access Points, And Voip Phones. Additionally, It Features 2 Gigabit Uplink Ports And 2 Combo Sfp Slots, Enabling High-Speed Connections To Core Network Devices Or Fiber Optic Backbones. Its Plug-And-Play Design Simplifies Installation, While The Sturdy Metal Rack-Mountable Casing Ensures Durability And Easy Integration Into Standard Network Racks. This Switch Is , Outdoor Cat 6 Cable, Conduct Type - Solid Bare Electrolytic Grade Copper, Nominal Conductor Diameter - 24 Awg, Insulation - Polyethylene (Hdpe), Resistance Unbalance- 5% Max, Conductor Resistance- 93.8O/1000 Mtr @20°C Max Mutual Capacitance- 5.6Nf/100Mtr. Max, Impedance- 100±15% Owith , Rack 9U 550X450mm Rack With Pdu 6 Socket, 10 Tray (2 Nos), Cable Organiser 1U Closed, 2 Fan & , Tp-Link Oc200 Omada Hardware Controller Router 2.4 Ghz 300 Mbps Wifi Speed Single Band Internal Antenna Ethernet (Cable Broadband) (Black), Centralized Management: Up To 100 Omada Access Points, 20 Jetstream Switches, And 10 Omada Routers.Free Cloud Access: Manage And Monitor With The Omada App Or Web Ui From Anywhere, Anytime.On-Premises Management: Locally Monitor And Manage Devices With The Ultimate Security And Stability.Industry-Leading Hardware Design: A Powerful Chipset, Durable Metal Casing, Usb 2.0 Port For Auto Backup, And Two Fast Ethernet Ports.Flexible Power Supply: 802.3Af/At Poe Or Micro Usb (Dc 5V/Minimum 1A) For Flexible Installation.Easy , Power Cable With Pvc Pipes, Accessories And Installation , Rj45 Connectors Modular 8 Pin Network Cable Plugs , Network Rack/Cctv Box Cabinet With Lock And Keys/Server Rack With Power Socket - 3U+, (White) , Eap100-Bridge Kit Omada 2.4Ghz 300Mbp Indoor/Outdoor Wireless Bridge, Up To 1640 Ft (500 M) Wi-Fi Transmission* Equipped , Omada Smartbridging: Our Unique Design For The Most => Limited

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

Tamil Nadu View Result →

45.

Agriculture #10759745 Price Bid

1 Supply, installation, testingand commissioning of 30 KVA, 3 Phase, 415 V AC, 50 Hz, 0.8 PF (lag), Silent DG Set (CPCB IV+) comprising of Engine coupled with alternatormounted on a common base frame. The DG set shall comprising of following; 1) The Engine (confirming to IS 10002) developing minimum 42 BHP at 1500 RPM, liquid cooled with radiator and fan, Turbo charged, powered by minimum four (4) strokes, multi cylinder, shall be automatic electric starting by 12 V DC starter motor system (battery capactity 90 Ah) and fitted with Electronic Governor (confirming to IS 10000) 2) DG set is capable of delivering an output of 10% in excess of rated KVA for a period of 1 hr in any period of 12 hrs continous running.3) The alternator (confirming to IS 4722) shall be brushless type, self-excited and self-regulated. The alternator must be provided with IP 23 protection with class-H insulation.Alternator efficiency at 100% load (0.8 pf) is not less than 88% and maximum voltage dip at full load (0.8 pf lag) is less than 20%.4) Instrument Control Panel shall be furnished for the engine and shall be comprising of Push Button, Water temperature gauge, Hour meter with RPM indicator, Lube oil pressure gauge.5) DG set complete with Acoustic enclosure shall be made of Pre-treated and Powder coated CRCA Sheet with vermin proof. Along with Residential Silencer and noise level less than or equal to 75 db at a distance of 1 m from of Acoustic enclosure (confirming toIS 8528- 10). DG accoustic enclosure shall have inbuilt fuel tank of minimum 70 litres capacity and fuel piping (between fuel tank and diesel engine), valves, level indications, oil filter and allstandard accessories. MS pipes, heavy class of suitable dia shall be used for fuel piping . Glass window on acoustic enclosure in front of the control panel and emergency stop switch outside the acoustic enclosure.6) DG set should be provided with remote monitoring system to share real time genset information and can be acceseed via mobile device or desktop.7) AVM Pads as per engine manufacturer standard shall be provided for DG set.8) Standard set of tools consisting of a set of 3 spanners, one screw driver, one standard plier and one nose plier of appropriate size shall be provided.9) Type Approval Certicate (as per CPCB IV norms) for the specified rating of the Power Generator from any of the designated agency authorized by CPCB,Type test report for Alternator latest to conform the specications. Company warranty certificate for 2 years on complete DG set shall be provided. 2 Fabrication, Supplying, Installation, Testing & Commissioning of AMF control panel. The Panel shall be free standing, floor mounted, metal clad cubicle type in construction, to form a compact assembly in dust / damp and vermin proof type, equivalent to IP-53. The thickness of sheet steel members shall not be less than 1.6 mm for cold rolled steel. AMF panel shall be complete with all accessories such as changeover Contactors/MCCBs having sufficient rating, AMF relays etc. for auto changeover of supply from Grid to DG set and vice-versa. Electrical Protections shall be provided through Numerical relays. Required CTs & PTs for metering and protection shall be included. All necessary control and supervisory equipment for the automatic operation of the set shall be included in the panel. Suitable rating of MCCB with over-load and short-circuit protection shall be mounted in the Control Panel for the isolation of loads. MCBs shall be provided for the isolation / protection of control circuit. AMF panel shall be equipped with meters displaying the parameters like Voltage,current , frequency, speed, KVA, KW, Power Factor, fuel Level, Engine running hour counter,Lube Oil Pressure and Engine temperature, etc. 3 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. 4 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of2.7 metre long etc. with charcoal/ coke and salt as required. 5 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 6 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 7 Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. 8 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. 9 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 10 All kinds of soil 11 Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 13 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 14 Centering and shuttering including strutting, propping etc. and removal of form for 15 Foundations, footings, bases of columns, etc. for mass concrete. 16 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. 17 Thermo-Mechanically Treated bars of grade Fe-500D or more. 18 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 19 Cement mortar 1:4 (1 cement : 4 coarse sand) 20 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 21 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 22 6 mm cement plaster of mix : 23 1:3 (1 cement : 3 fine sand) 24 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 25 Hot finished welded type tubes. 26 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 27 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. 28 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 29 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 30 Supplying ofXLPE Armoured cable with aluminium conductor of 1.1 KV grade confirming to IS:7098 (Part- I) 1988 with up to date ammendments of the following sizeas required. 31 3.5 x 50 sq. mm 32 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 33 3½ X 50 sq. mm (35mm) 34 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. 35 Above 35 sq. mm and upto 95 sq. mm 36 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 37 Above 35 sq. mm and upto 95 sq. mm 38 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 39 Above 35 sq. mm and upto 95 sq. mm 40 Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 7

Jharkhand View Result →

46.

Public Administrative Department #10714170 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 1

Rajasthan View Result →

47.

Defence #10702565 Price Bid

Procurement Of Medical Stores Procurment Of Medical Stores , Drugs , Judkins Left Angiography Catherer - Assorted Sizes , Judkins Right Angiography Catherer - Assorted Sizes , Percutaneous Catherer Introducer Sheath Set, 11 Cm - Assorted Sizes , Ptfe Angiography Guide Wire 0.035 X 260Cm J Tip , Coronary Guide Wire - Nitinol / Stainless Steel Core - Polymer Tipped , Standard Back Table Cover ( Usfda Approved ) , Doc Wire 0.014 Guide Wire Extension, , Thin Triple Layered Self Adherent Bordered Soft Silicon Dressing With Safetac Layer Thin Flexible Non Woven Layer Of Viscose And Poluyester And Backing Polyureathane Film Size 5*12.5Cm , Compression System For Pacemaker / Icd Implantation Aftercare, To Prevent Pocket Haematoma , Coronary Guide Wire- Silicone Coated Radiopacity 4 Cm, Tip Load 0.7 Gm ( Extra Support Wire ) , Pressure Monitoring Line 200 Cms In Length , Balloon Tipped Temporary Pacemaker Lead , Coronary Guide Wire- Sion Tec Techonology, Dual Core , Twist Wire, Actone Technology Tip Load 0.5Gm, 1.5Cm Silicone Coating, 18.5 Cm Hydrophilic Coating. , Coronary Guide Wire Tip Load 0.8 Gm, Hydrophilic Coating With Polymer Sleeve 20Cm, Tip Radiopacity 3 Cm , Goose Neck Microsnare Kit => Limited

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 14

West Bengal View Result →

48.

Educational and Research Institute #10680797 Price Bid

supply of tool machinery goods- 1 Connecting screw driver 2 Neon tester 3 Insulated combination pliers 4 Electrician knife 5 Soldering Iron Changeable bits 6 De- soldering pump 7 Soldering Iron 8 Optical Drives 9 Post error debugging card 10 PCI slot Testing tool 11 Network Management Software 12 Wireless Network Adapter 13 Router 14 LAN Cards 15 WI-FI LAN Card 16 Power Meter 17 Media Convertor 18 24 port UTP jack panel 19 NVR 20 POE adapters kit 21 IP Camera Outdoor 22 Analog camera with dvr 23 SMPS 24 Blu-Ray driveand player Dell/ hp/ toshiba 25 Digital Camera 26 Network storage 27 Card Reader 28 SMPS Trainer kit 29 Foot rule steel tape 30 Steel Measuring Scale 31 MARKING KNIFE 32 Try Square 33 Bevel Square 34 Carpenter marking gauge 35 Carpenter mortise gauge 36 Hand Saw 37 Metal smoothing plane Anant 38 Screw driver 39 Contraction measuring scale 40 Wi Fi Router 41 Switch 42 DVD or Blu-Ray Writer 43 Network Rack 44 Screw Driver Set 45 Mini Dongle for Bluetooth devicesConnection 46 Patch Panel 47 Punching Tool 48 Tally 49 Box drawing instrument 50 Protractor celluloid 51 Scales plotting box wood 6 metric scales 52 Set square transparent 53 Set square celluloid 54 T-Square 55 Template- Architects and builders 56 Telescopic Alidade 57 Levelling staff straight pieces 58 Transit Theodolite with stand with all accessories 59 Digital theodolite 60 Instrument for total station 61 DLP projector 62 First aid box 63 Screen for projector 64 Air conditioner 65 Document Camera Visualiser 66 Smart board-inter active board 67 Measuring Steel Tape 68 Combination Plier Insulated 69 Screw Driver Insulated 6mm X 150 mm 70 Electrician screw driver thin stem insulated handle 4mm X 100 mm 71 Heavy Duty Screw Driver insulated 72 Electrician Screw Driver thin stem insulated handle 73 Punch Centre 74 Knife Double Bladed Electrician 75 Neon Tester 76 Steel Rule Graduated both in Metric and English Unit 77 Hammer cross peen with handle 78 Connecting screwdriver 79 Neon tester 500 V. 80 Screw Driver Set 81 Soldering iron 82 Electrician knife 83 Tweezers 84 Digital Multimeter 85 Soldering Iron Changeable bits 86 De- soldering pump electrical heated manual operators 87 Precision set of screw drivers 88 Precision set of screw drivers 89 Precision set of screw drivers 90 Tweezers Bend tip 91 Steel measuring tape 92 Tools maker vice 93 Crimping tool pliers 94 Magneto spanner set 95 File flat second cut 96 File flat smooth 97 Plier - Flat Nose 98 Round Nose pliers 99 Hammer ball pen 100 Allen key set Hexagonal set of9 101 Tubular box spanner set of 6Nos 102 Magnifying lenses 103 Continuity tester 104 Hacksaw frame adjustable 105 Chisel Cold Flat 106 Hand Drill Machine Electric with Hammer Action 107 Bench Vice 108 Bench Vice 50 mm 109 DC Regulated Variable Programmable DC Power Supply 110 LCR meter Digital Handheld 111 Analog multimeter 112 Clamp meter 113 Dimmer starter 114 Autotransformer 115 Milli Ammeter AC 116 Op Amp trainer 117 Digital IC Trainer 118 Digital IC Tester 119 Digital and Analog Bread Board Trainer 120 POWER ELECTRONICS TRAINER with at least 6 nos of onboard applications 121 Electronic circuit simulation software with 6 user licenses 122 Different types of electronic and electrical cables connectors sockets terminations. 123 DSO colour 124 PAM PPM PWM trainer kit 125 AMFM Commercial radio receivers 126 Sensor trainer kit containing Various sensors like Thermocouple RTD Thermocouple load cell strain gauge LVDT smoke sensors speed sensor Limit Switch Photo sensors Optocouplor Proximity Sensor 127 Fiber optic communication trainer 128 Seven segment DPM 129 LCD based DPM 130 SMPS of different make 131 UPS trainer 132 Mobile phone Trainer 133 Cell phone power source with charger chords for different cell phones 134 LCD TV Trainer kit 135 LCD TV 136 LED TV Trainer kit 137 LED TV 138 Home theatre system 139 Solar Training Kit Simulator 140 LED lighting system 141 Trammel 142 Steel Rule with metric British graduation 143 Compressor unit 144 Try Square 145 Pocker. 146 Caliper inside spring type 147 Mallet. 148 Caliper hermaphrodite spring type 149 Carrier for mounting components such as PB relay boxes. 150 Caliper outside spring type 151 Aviation Snips straight Cut 152 Cut section model for pneumatic components 153 Divider spring type 154 Planishing hammer. 155 Scriber 156 Centre Punch 157 Screw driver 158 Depthmicrometer. 0-25 mm 159 Stake grooving. 160 Hammer ball peen With handle 161 Comparators Gauge - Dial Indication with Stand and Bracket 162 Hammer ball peen With handle. 163 File flat - second cut 164 Engineer s try square knife- edge 165 File flat smooth 166 File half round second cut 150 mm 167 Vernier Bevel protector 168 Carbide Wear Block 169 Carbide Wear Block 170 Dot punch 171 Spirit Level metal Type - 2 172 Arm strong type tool bit holder 173 Combination Set 174 Arm strong type tool bit holder 175 Arm strong type tool bit holder 176 Stillson wrenches 177 Micrometer inside with extension rods 178 Vernier caliper 179 Adjustable pipe chain tonge to take pipes 180 Adjustable spanner 181 Screw pitch gauge Metric 182 Surface plateC.IGranite with Stand and Cover 183 Marking table Mild steel 184 Universal scribing block 185 V-Block pair with clamps 186 Punch letter set 187 Portable hand drill Electric 188 File knife edge smooth 189 File feather edge smooth 190 File triangular smooth 191 File round second cut 192 File square second cut 193 File flat second cut safe edge 194 File half round second cut 195 File round bastard. 196 File hand second cut 197 File card 198 Oil Can 199 Wooden handle forged Soldering Iron copper bit 200 Blow Lamp 0.50 liters. 201 Spanner adjustable 202 Double Ended tubular Box spanner set with Tommy bar 203 Glass magnifying 204 Clamp C 205 Hand Reamer set Tapar pin straight flute 206 Machine Reamer parallel Helical flute 207 Scraper flat 208 Scraper triangular 209 Scraper half round 210 Pipe wrench 211 Adjustable pipe die set BSP 212 Machine vice - Swivel Base 213 Machine vice - Swivel Base. 214 Sleeve drill Morse 215 Vice bench 216 Wing compass 217 Power tools for fastening 218 Different Profile gauges Plate type - For demonstration 219 Knurling tool Diamond 220 Knurling tool straight 221 Knurling tool Diagonal 222 Indexable boring bar with inserts 223 Machine maintenance mannual for Lathe Pedestal grinder Drill machine Power saw 224 Temperature gauge 225 Dowel pin straight 226 Standard Tap screws 227 Lapping plate 228 Caps screws 229 Drill gauges 230 Cast Iron Globe Valve Flanged type 231 C.I. Sluice Gate valve flanged type 232 Stop cock 233 Slip-on Forged steel Flange 234 Pipe threading die with handle 235 Pulleys for V-belt or Flat belt 236 V-belt and Flat belt 237 Packing gasket 238 Washer clutch keys jib cotter circlip 239 Bearing different types 240 Lifting sling 241 Bearing extractor 242 Pulley extractor 243 File half round bastard 244 REFRIGERATOR ( 365 LTR ) DOUBLE DOOR 245 GAS TANDOOR WITH SKEWER ROTI SET ( 12 SKEWERS ) COMMERCIAL 246 BAIN MARIE 2 PAN WELL 55.5 X 70 X 20 CM 247 CHINESE GAS BURNER DURA STEEL 60 X 24 X 30 248 SALAMANDER AVON REFRIGERATION 600 X 510 X 550 MM 249 ELECTRONIC GEYSER 25 LTR( HAVELLS, ADONIA )DIGITAL TYPE 250 DOUGH KNEADING MACHINE ( 5KG CAP )1000 WATT, STAND MIXER 251 WATER BOILER ( ELECTRICAL 15 LTR)2000 WATTS 252 MIXER CUM GRINDER FOOD PROCESSOR 1 NOX 1000 WATT,WITH 7 ACCESSORIES 253 WOK CHINESE KADAI 16 DIA METER 254 PRESSURE COOKER ( 5 LTR ) CAP 255 EGG CUTTER STAINLESS STEEL 256 STEAK HAMMER ALUMINUM 257 MS CUPBOARD INTERIO 2 DOOR WITH 3 SELVES 7 X 3 X 3 258 HAND BLENDER 250 WATT 259 SIZZLER PLATES ( 17-18 DIA) HEAVY FINE QUALITY 260 COFFEE URNS , ( 40 CUP CAPACITY) 261 CHINESE CHOPPER 262 MS CHOPPER 600WATT 263 KITCHEN KNIFE, BIG CARTINI 8 BLADE 264 VEGETABLE KNIFE 13 CM BLADE, MEYER CERAMIC KNIFE 265 BREAD KNIFE 8 BLADE 266 PASTA MACHINE , 150 WATT 267 WATER PURIFIER REVERSE OSMOSIS 6.5 LTS UV + UF 268 SODA MAKER MACHINE HEAVY DUTY INDUSTRIAL MODEL KVR - 8 FLAVOR 269 ESPRESSO MACHINE COFFEE GRINDER 1300 WATT 270 MINIBAR FRIDGE 271 LED 42” HD DISPLAY 272 MUSIC SYSTEM WITH DVD PLAYERS CONCEALED SPEAKER, 5.1 CHANNEL 273 ELECTRIC OVEN 20 LTRS (IFB, WONDER CHEF,HAVELLS) 274 DISPLAY FOOD CABINET OSHAM SLIDING DOOR ,814X 641 X 831 MM W X D X H 275 ROOM SERVICE TROLLEY HOME CENTRE MONTOYA TYPE 276 CARAFE BOROSIL SMALL WITH STRAINERS, 350 ML 277 CARAFE BOROSIL LARGE WITH STRAINERS , 700ML 278 SOUP FLASK TERMOSTEEL ( 500 ML ) 279 WATER FLASK THERMOSTEEL FLIP LID FLASK 1000ML SILVER 280 PASTA TROLLEY GOLDEN LINE 4 CASTOR WHEEL 281 EPABX SYSTEM + AVS MACHINE S- TECH CS432, 4 MAIN TRUNK LINES & 32 EXTENSION 282 SAFE DEPOSIT LOCKER / FORTE 40 BIOMETRIC SAFE 283 UMBRELLAS , CITIZEN 3 FOLD 284 STEEL CUPBOARD WITH UNBREAKABLE GLASS , INTERIO 4 SHELVES 7.5 X 3 X 2.5 285 FRIDGE WITH CABINET 275 LTR 286 VACUUM CLEANER WET & DRY 287 WASHING MACHINE 8KG FULLY AUTOMATIC 5 X 1400 RPM , INBUILT HEATER 288 WATER HEATER 25 LTRS HSE-SES , 2000 WATT 289 CARPET EXTRACTOR, CARPET CLEANER MACHINE 1100 , W PRO E X 25 290 HIGH PRESSURE JET CLEANER , KK PWIN 165 1800 WATT , 165 BAR 291 LUGGAGE RACK MINT WOOD H 27.5 X W 28.5 X D 12.8 292 HEAVY BOTTOM PAN 10 LTR NON STICK CANEROLI 40 CM 293 COOKER ( 2 LTR ) CLASSICS 2L ALUMINUM 294 MANDOLIN GRATER ADJUSTABLE SS 4 BLADES WITH HANDLE 295 PROBE THERMOMETER ( 75 - 100 DEGREE CELCIUS ) ST 9283B LCD , DIGITAL MULTISTEM THERMOMETER 296 CAKE STAND ( SS ) 13 TOP 297 HEAT PROOF GLOVES GRIPWELL KELVES PALM LEATHER HEAT RESISTANT GLOVES 298 GRINDING STONE FINE GRINDER STONE 10 299 PIZZA CUTTER STAINLESS STEEL 300 COOKIE CUTTER ( 5 SHAPES ) ALLAMWAR 12 PCS STAINLESS STEEL CUTTER SET 301 SANDWICH GRILLER / TOASTER SW X 400 700 WATT ( 302 JUICER MACHINE PHILIPS HR 1863/20 , 2 LTR 303 ROLLING BASE WOODEN 10 304 FRYING PAN NON STICK GRANITE FRY PAN ( 280 MM) BLACK 305 FRYING PAN LARGE NON STICK FRY PAN 240 MM0 306 CLEVER STAINLESS STEEL 2 IN 1 VEGETABLE SCISSORS 307 Steel rule 308 Outside spring caliper 309 Inside spring caliper 310 Hermaphrodite caliper 311 Divider spring 312 Centre Punch 313 Hammer 314 Cold chisel flat 315 File flat bastard 316 File flat 317 File flat smooth 318 Screw Driver 319 Scribing blockuniversal 320 Screw driver heavy duty 321 Spindle blade screw driver 322 Solid parallels in pairs different sizes in Metric 323 Oil stone 324 Punch letter set 325 Punch number set 326 Drill Chuck 327 File Half round 328 File triangular smooth 329 Reamer 330 Reamer adjustable 331 Tool bits holder Armstrong R.H. 332 Table chuck 333 Machine vice 334 Compound angle vice standard sine 335 Universal Machine Vice 336 Shaper tool holder turret type to suit the machine 337 Base chuck forslotter to suit the machine 338 Milling Cutter Side and face cutter 339 Milling Cutter Side and face cutter Adison 340 Milling Cutter Adison 341 Milling Cutter -Side and face cutter adison 342 Milling Cutter - Double Angle Unequal. adison 343 Milling Cutter - Double Angle Unequal. adison 344 Milling Cutter - Single Angle.. adison 345 Milling Cutter - Slitting Saw Cutter adison 346 Milling Cutter - Slitting Saw Cutter. adison 347 Milling Cutter - Shell End Mill.Parallel Shank end mills adison 348 Milling Cutter - Parallel Shank end mills. adison 349 Milling Cutter -mills. Parallel Shank end mills.. adison 350 Milling Cutter - Parallel Shank end mills… adison 351 Milling Cutter - Parallel Shank end mills.... adison 352 Milling Cutter - T Slot Cutter with Parallel Shank adison 353 Micrometer outside. 354 Micrometer depth gauge 355 Digital micrometer 356 Vernier Caliper 357 Direct reading vernier caliper 358 Combination set 359 Vernier bevel protractor 360 Telescopic gauge 361 Centre punch 362 Divider spring joint 363 Caliper odd leg spring joint 364 Wrench adjustable 365 Spanner double ended 366 Pipe wrench 367 Plumbing hammer weight 368 Four way reversible valve 369 Tape measuringgraduation in mm 370 Voltmeter ACDC portable precision grade Digital Panel board type 371 Rule steel 372 Drawing Board 373 Easel a Type stand 374 Hack Saw with Frame 375 Chisel Knife 376 Chisel Knife- 8mm 377 Chisel Knife- 10mm 378 Chisel Knife 20mm 379 Chisel Knife- 30mm 380 Diamond Glazier Knife 381 Paint Tin Opener 382 Shave Huck Knife 383 Glider Knife 384 Paint Burner Acetylene Gas 385 Screw Driver 386 Mild Steel Panels 387 Sink Stainless steel 388 Suction feed spray gun with accessories 389 Infra red lamp 390 Pneumatic Polishing Machine with Pads 391 Pipe vice 392 Pipe wranch 10 393 Pipe wranch 16 394 flat file- smooth finish 395 Circuler cut file 396 Raft cut 397 Pipe dai set metric Inches 398 Gun Spray with Gravity Feed Cup with Complete accessories with Complete accessories 13ltr 399 Gun Spray with Gravity Feed Cup with Complete accessories.. 400 Conventional Spray Gun For Pressure Feed 401 Pencil Hardness Tester 402 Air Compressor single Phase 1 HP 403 File - Flat - Bastard 404 File - Flat - Safe Edge 405 Cooling tower 406 File flat roughdouble cut 407 File half round fine double cut 408 File round finedouble cut 409 File flat fine double cut 410 File square finedouble cut 411 File triangular fine double cut 412 Try square 413 Divider spring joint 414 Caliper spring joint in side 415 Caliper odd legspring joint 416 Hammer ball pane 417 Cold Chisel flat and cross cut 418 Engineers rule 419 Tape measuring 420 Pliers flat nose 421 Line tester 422 Tweezers 423 Oil can 424 Surface Gauge universal 425 Bench vice 426 Hack saw tubular metal frame adjustable 427 Snip sheet metal straight nose 428 Snip sheet metal curved nose 429 Wooden mallet Nylon mallet 430 Round Punch 6mm 431 Round Punch 432 Round Punch 4mm 433 Screw driver plastic handle 434 Screw driver plastic handle Flat tip 435 Philips screw driver 436 Soldering ironexchangeable copper tip 437 Knife foldedstainless steel - 438 Tenon saw 439 Firmer chisel 440 Fire buckets 441 Quick couplesprocess tube adopter 442 Flaring tool set single type for tube. 443 Swaging tool punch type set of size for tube. external type for copper tube 444 Pipe cutter miniature for copper tube 445 Pinch of tool for copper tube 446 Ratchet spanner 447 Capillary plug gauge 448 Piercing pliers 449 Spanner double ended 450 Wrench adjustable 451 Wrench adjustable length 250mm 452 Valve key handleTreated as consumable 453 Hollo Punch hole for cutting gasket 454 Scissor gasketcutting stainless steel 455 L-Allen key 456 T-Allen key set 457 Pipe cutter withbuilt in reamer and space cutter for copper tube 458 Lapping plate 459 Hammer ball peen 460 Tap set withmatching drills 461 Tap set withmatching drills V to 462 Piercing Valve 463 Feeler gauge 464 Tape measuringgraduation in mm 465 Ammeter ACDCportable precision grade Digital Panel board type 466 Multi meter digital type 467 C.R.O Single beam 468 C.R.O Dual trace Double beam 469 A.F.O Oscillators 470 Pressure gauge 471 Compound gauge Digital type 472 Electronic leak detector 473 Sling psychro meter mounted on aluminum back 474 Stop watch 475 Multi meter 476 Sensor thermometer digital 477 filler guage 478 Wire gauge 479 Dial thermometer 480 Compressors testers for small hermetic compressors 481 Precision set of T5 T6 T7 screwdrivers- 482 Jacket stripper Coring tool for 500 series cable 483 Center conductor cleaner 484 Universal drop trimmer for RG 6/11 cables 485 F - connector tool for RG 6/11 cables 486 F connector compression tool for RG 6/11 cables 487 Solar Training Kit Simulator With built in meters for DCV DCA AC Multifunction Meter for ACI ACV Power Frequency Protection Circuits BS-10 terminals formaking the connection Single Dual axis tracking system Charge Controller PWM based MPPT Charging Stage Bulk Absorptions and Float 488 LED lighting system Measurement of Power Voltage Current Power Factor and Light output performance of different lighting products like LED CFL at variable inputvoltages 0 to 245V variable AC 489 PLC Systems with digital IP OP modules and software 6 Digital Inputs 24V DC. 4 Digital Outputs 24V DC 2K Words of memory 256 words of register. Powerful features like built in Floating Point Sub Routines etc.One RS232 C communication facility for PC interface. Three channels can be configured as follows Pulse width modulation output or Pulse train outputor High speed counter input. 490 Electronic Pneumatics Trainer kit 491 CRO dual trace 20 MHZ ( Component testing facilities ) 492 Steel wire Brush 50mmx150mm 493 carborundum 15 x 5 x 4 cm smooth 494 Straight edge gauge 2 ft. 495 Straight edge gauge 4 ft. 496 Surface gauge with dial test indicator plunger type i.e. 0.01 mm 497 Tachometer Counting type 498 Taps and Dies complete sets 5 types 499 Taps and wrenches - Metric 500 Temperature gauge 0- 100 deg c 501 Thread pitch gauge metric BSW 502 Timing lighter 503 Universal puller for removing pulleys bearings 504 V Block 75 x 38 mm pair with Clamps 505 Vacuum gauge to read 0 to 760 mm of Hg 506 Valve Lifter 507 Valve spring compressor universal 508 vernier caliper 0-300 mm with least count 0.02mm 509 Vice grip pliers 510 Voltmeter 50VDC 511 Hand Shear Universal 250mm 512 Solid Parallels in pairs Different size in Metric 513 Spanner Clyburn 15 514 Spanner T. flocks for 515 Spark lighter 516 Spark plug spanner 14mm x 18mm x Size 517 Spirit level 2V 250 05 518 Spring tension tester 519 Stake grooving. 520 Spanners socket with speed handle T-bar ratchet and universal upto 32 mm set of 28 pieces with box 521 Steel tool box with lock and key folding type 400x200x150 mm 522 Wire cutter and stripper 523 Car Jet washer with standard accessories 524 Chaser hard WV 9 to 40 T.P.I. set of 11 external. 525 Chaser hand WW 9 to 40 T.P.I. set of 11 internal. 526 Chisel 10 cm flat 527 Chisels cross cut 200 mm X 6mm 528 Circlip pliers Expanding and contracting type 15cm and 20cm each 529 Clamps C 100mm 530 Clamps C 150mm 531 Clamps C 200mm 532 Compression testing gauge suitable for diesel Engine 533 Connecting rod alignment fixture 534 Copper bit soldering iron 0.25 Kg 535 Cylinder bore gauge capacity 20 to 160 mm 536 DC Ohmmeter 0 to 300 Ohms mid scales at 20 Ohms 537 Depth micrometer 0- 25mm 538 Dial gauge type 1 Gr. A complete with clamping devices and stand 539 Dividers 15 cm Spring 540 Drift Punch Copper 15 Cm 541 Drift copper 10 x 15 12 mm 542 Drill point angle gauge 543 Drill twist 1.5 mm to 15 mm various sizes by 0.5 mm 544 230 V 25 watts Electric Soldering Iron 230 V 60 watts 545 Electric testing screw driver 546 Engineers square 15 cm. Blade 547 Engineers stethoscope 548 Equipment puncture in box 549 File flat 20 cm bastard 550 File half round 20 cm second cut 551 File Square 20 cm second cut 552 Files assorted sizes and types including safe edge file 20 Nos 553 Glow plug tester 554 Granite surface plate 1600 x 1000 with stand and cover 555 Grease Gun 556 Grover- 34mm. 557 6mm Grover 558 Growler 559 Hacksaw frame adjustable 20-30 cm 560 Hammer Chipping 0.25 Kg 561 Hammer copper 1 Kg with handle 562 Hammer Mallet 563 Hammer Plastic 564 Hand operated crimping tool i for crimping up to 4mm and ii for crimping up to 10mm 565 Hand reamers adjustable 10.5 to 11.25 mm 11.25 to 12.75 mm 12.75 to 14.25 mm and 14.25 to 15.75 mm 566 Hand vice 37 mm 567 High rate discharge tester cell tester 568 Left cut snips 250mm 569 Magneto spanner set with 8 spanners 570 Magnifying glass 75mm 571 Marking out table 90X60X90 cm 572 Multi Scan Tool 573 Multimeter digital 574 Oil Stone 15 cm x 5 cm x 2.5 cm 575 Oscilloscope 20MHz 576 Outside micrometer 0 to 25 mm 577 Outside micrometer 25 to 50 mm 578 Pat melting 579 Philips Screw Driver set of 5 pieces 100 mm to 300 mm 580 Pipe cutting tool 581 Pipe flaring tool 582 Piston Ring groove cleaner 583 Pliers side cutting 15 cm 584 Poker 585 Portable oil monitoring Indicator 586 Power Supply 0-12 v lamp 587 Radiator pressure cap 588 Rear axle assembly- gear box steering box assembly of the diesel engine 589 Right cut snips 250mm 590 Rivet sets snap and Dolly combined 3mm 4mm 6mm 591 Scriber 15 cm 592 Scriber with scribing black universal 593 Set of stock and dies - UNC UNF and metric 594 Shear Tin Mans 450 mm x 600mm 595 Sheet Metal Gauge 596 Soldering Copper Hatchet type 500gms 597 Sher Tinmans 300mm 598 Shovel 599 Ammeter 300A 60A DC with external shunt 600 Angle plate adjustable 250x150x175 601 Angle plate size 200x100x200mm 602 Arbor press hand operated 2 ton capacity 603 Auto Electrical test bench 604 Battery charger 605 Belt Tensioner gauge 606 Spanner ring set of 12 metric sizes 6 to 32 mm. 607 Blow Lamp 1 litre 608 AC alternator slip ring puller 609 Allen Key set of 12 2mm to 14mm pieces 610 Air blow gun with standard accessories 611 Alternator for tractor different type Mico , Bosch, tux 612 Hands file 20 cm. Second cut flat 613 Caliper outside spring joint 614 Caliper inside spring joint 615 Caliper odd-leg firm joint 616 Steel Rule 617 Scriber 618 Hammer ball peen 619 Centre punch 620 Prick punch 621 Divider spring joint 622 Safety goggles clear glass Good quality 623 Marking table CI 624 Bench vice 125 mm jaw 625 V - Block 626 Pliers flat nose 627 Micrometer Outside 628 Micrometer Inside 629 Vernier Bevel Protractor 630 Vernier Micrometer 631 Universal Dial Test Indicator - Plunger Type 632 Vernier Height Gauge 633 Plain Ring and Plug Gauge 634 Drill Twist Set 635 Reamer machine 636 Combination Drill Centre Drill 637 Tool Bit assorted sizes on holder 638 Chalk Board on mobile stand 639 Desk 640 Hand Chaser 641 Hand Chaser 642 Revolving Centrer to suit Lathe tailstock 643 Tool Cemented carbide assorted shaped External for steel turning 644 Machine Chase 645 Coventry Die head 646 Lathe Mandrels Diff. Types 647 Coventry Type Die Head Self opening 648 Stainless steel rule 649 Hack saw frame 650 File half round 651 File flat 652 Try square 653 Earth clamp 654 Electrode holder ESAB 655 Oxygen Gas Pressure regulator double stage ESAB 656 Acetylene Gas Pressure ESAB 657 CO2 Gas pressure regulator with flow meter ESAB 658 Argon Gas pressure regulator ESAB 659 First Aid box ESAB 660 Flash back arrester torch mounted ESAB 661 Flash back arrester cylinder mounted ESAB 662 Screw Driver 663 Screw Driver 664 Terminal screw Driver 665 Hammer Ball peen 666 Neon tester pencil bit type 667 Small crimping tools assorted 668 Spanner set DE 669 Screw driver set set of 5 670 File half round 2nd cut 671 File round 2nd cut 672 Soldering iron TONY 673 Neon tester 674 Spade 675 Sickle 676 Khurpa 677 Kasola 678 Trifali 679 Zindra 680 Dori (Nylon rope) 681 Wheel hand hoe 682 pH meter 683 Electrical conductivity meter 684 Flame photometer 685 Spectrophotometer 686 Atomic absorption spectrophotometer 687 Shaking apparatus 688 Distillation unit 689 Ammonia distillation unit (with heaters) 690 Gas connection 691 Sampling tools (augers) 692 Refrigerator 693 Gas cylinders with regulators 694 Gas cylinders with regulators 695 Gas cylinders with regulators 696 Incubator (with temperature control) 697 Infrared soil moisture estimation unit 698 Electric oven 699 Soil cores 700 Soil infiltratormeter 701 GPS system with mobile phone 702 Table top centrifuge 703 Auto Titrator 704 Battery charger

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 6

Haryana View Result →

49.

Power #10656217 Price Bid

Augmentation / Renovation And Modernization Of 33 / 11 Kv Receiving Station Sunjwan From 2X1.5 Mva To 2X3.15 Mva Along With, Erection Of New 33 Kv Line ( 2Nd Source ) From 33 / 11 Kv, 3X10 Mva, Receiving Station Channi Himmat To Receiving Station Sunjwan, Stabilization / Strengthening Of Existing 33 Kv Line ( 1St Source ) And Other Allied Works Relating To Receving Station Mes Sunjwan, Jammu On Turnkey Basis- 1 Substation Main Equipment 2 33 Kv Transformer Bay & Single Bus 33 Kv Line Bay 3 33 Kv Vcb ( 36 Kv, 1250A, 26.2 Ka, Outdoor Type ) 4 33 Kv Isolator Without Earthing Blade ( 36Kv, 1250A, Outdoor, 3 Poles, 25 Ka ) 5 33 Kv Current Transformer ( 33 Kv, 1F, Multi Ratio Multi Core, Outdoor ) ( 1 No. Per F ) 6 33 Kv Voltage Transformer ( 33 Kv / 110 V, 1F, Multi-Core, Outdoor ) , ( 1No. Per F ) 7 33 Kv Lightening Arrestors ( 30 Kv, 10Ka, Station Class, Zno, Polymer ) Gap Less 8 33 Kv Polymer Post Insulator36kv, 170Kv Impulse, Creepage Distance 1224M 9 33Kv C&R Panel Along Witho / C, E / F Relays, Diffrential Relay, Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows With Annunciation Relays, 3-Phase Tri-Vector Meter -5 Amps With Rs-485 Port, Dlms Compliant With Rs-485 Port ( For Power Transformers ) 10 33Kv C&R Panel Along Witho / C, E / F Relays, Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows With Annunciation Relays, 3-Phase Tri-Vector Meter -5 Amps With Rs-485 Port, Dlms Compliant With Rs-485 Port 11 Steel Structures 12 Galvanised Steel Structures 13 Galvanised Nuts & Bolts 14 Conductor And Hardware 15 200 Mm² Acsr Panther Conductor 16 T Clamps 17 Tension Fitting Suitable For 200 Mm Sq Conductor. 18 33 Kv Polymer Composite Disc Insulators 36 Kv, Min Falling Load 70 Kn, Lightening Impulse 170 Kv Positive And 180 Kv Negative, Creepage Distance 900 Mm. 19 Earth Wire 7 / 3.15 Mm Sq. 20 Gi Flat For Earthing 50X6mm & 25X3 Mm 21 3.15 Mva , 33 / 11 Kv Power Transformer 22 33 / 11Kv, 3.15 Mva Onan, Copper Wound, Out-Door Type, Conventional Power Transformer, Oil Filled With Oltc And All Accessories Including Ht And Lt Terminal Connections 23 Power Control Cables And Accessories 24 12 Core, 2.5 Mm Sq. 25 6 Core, 2.5 Mm Sq. 26 4 Core, 2.5 Mm Sq. 27 2 Core, 2.5 Mm Sq. 28 Lugs, Ferrules Etc. 29 Laying Of 33 Kv Line ( Approximately 1.9 Km ) 30 13 Mtr. Long St Poles ( St-410Sp69 ) 31 G.I Channel ( 100X50x6 ) Mm Sq, G.I Angle ( 65X65x6 ) Mm, G.I Angle ( 50X50x6 ) Mm Sq. Sq., G.I Flat ( 50X6 ) Mm Sq. 32 200 Mm2acsr Panther Conductor 33 P.G. Clamp For 200 Mm2 Acsr Panther Conductor 34 33 Kv Pin Insulators Polymer Type ( 10Kn ) 35 33 Kv Polymer Composite Disc Insulators 36 Kv, Min Falling Load 70 Kn, Lightening Impulse 170 Kv Positive And 180 Kv Negative, Creepage Distance 900 Mm. 36 Tension Fitting Suitable For 200 Mm Sq Conductor. 37 Galvanised Nuts And Bolts With Washers 38 33 Kv Danger Plates With Clamps 39 Anti-Climbing Device With Clamps 40 Earthing Complete ( Gi Pipe 40 Mm Or Gi Rod 20 Mm, 2.5 Mtr Long With Gi Strip ) 41 33 Kv Isolatorwithout Earthing Blade 42 Red Oxide Paint 43 Aluminum Paint. 44 Cement Bottoming ( 1:2:4 Mix As Per Rec Standards, 6 Cum / Pole ) 45 Aluminium Jointing Sleeevs 46 Insertion Of 11 Mtr St Poles In Existing 33Kv Line 47 11 Mtr. Long St Poles ( St-410Sp56 ) 48 G.I Channel ( 100X50x6 ) Mm Sq, G.I Angle ( 65X65x6 ) Mm, G.I Angle ( 50X50x6 ) Mm Sq. Sq., G.I Flat ( 50X6 ) Mm Sq. 49 200 Mm2acsr Panther Conductor 50 P.G. Clamp For 200 Mm2 Acsr Panther Conductor 51 33 Kv Pin Insulators Polymer Type ( 10Kn ) 52 33 Kv Polymer Composite Disc Insulators 36 Kv, Min Falling Load 70 Kn, Lightening Impulse 170 Kv Positive And 180 Kv Negative, Creepage Distance 900 Mm. 53 Tension Fitting Suitable For 200 Mm Sq Conductor. 54 Galvanised Nuts And Bolts With Washers 55 33 Kv Danger Plates With Clamps 56 Anti-Climbing Device With Clamps 57 Earthing Complete ( Gi Pipe 40 Mm Or Gi Rod 20 Mm, 2.5 Mtr Long With Gi Strip ) 58 Red Oxide Paint 59 Aluminum Paint. 60 Cement Bottoming ( 1:2:4 Mix As Per Rec Standards, 6 Cum / Pole ) 61 Aluminium Jointing Sleeevs 62 Guard Netting Of 33 Kv Lines 63 Guys For 33 Kv Lines 64 Galvanised Stay Set With 50X8 Mm Stay Clamp, Guy Insulators ( 2 Nos ) , Anchor Plate ( 300X300x8mm ) , Nut Bolts, 2 Nos Turn Buckles, 1.8 M Long, 20 Mm Diameter Solid Gs Stay Rod & 7 / 4.00 Mm Dia Gi Standard Wire Complete. 65 Common Miscellaneous Works 66 Development Of Land 67 Chain Link Fencing Of 33Kv Yard Of Substation By Way Of Mass Concreting In Foundations And Chain Link Fencing Of 6Ft. Height 68 33 / 11Kv Transformer Foundation 69 33Kv Equipment Foundation ( Breakers, Cts / Pts, Isolators, Las ) 70 Earthing Mat ( Gi Flat 50Mm X 8Mm ) 71 33Kv Yard Concreting / Metalling And Laying Of Gravels 20Mm ( Complete Bays ) 72 Yard Lightening ( Complete ) With 4 No. 9 Mtr Long St Poles ( St-410 ) , Sp-33, Fitted With 2 No. 60 W Led Lights On Each Pole, Complete With Control Gear Box, Earthing And Bottoming Of Poles. 73 Rcc Cable Trench ( 1:2:4 ) For Laying Of 11 Kv Xlpe Power Cables And Control Cables From Various Equipments To Control Room & From Control Room To Outgoing Structures Alongwith Rcc Duct Covers. 74 Earthing Electrode ( 3M Long 40Mm Dia Gi Pipe ) Through Gi Strip 75 Common Miscellaneous Equipments 33 / 11Kv Substations 76 A ) . Battery Bank 30 V, 100 Ah , Of 15 No. Cells Of 2 V Each, Sealed Maintenance Free Vrla Type, High Impact Polyprophelenecopolymer Container, Flame Retardant. B ) . 30V, 100 Ah , Float-Cum-Boost Charger With Full Wave Rectification For 220 V, 1Phase, 50 Hz Ac Input Supply . 77 Distribution Panel ( 30 V, Dc ) Made Of Crca Thickness Not Less Than 2Mm. Powder Coated, Degree Of Protection Ip43 For 2 No Battery Incoming Supply With 2 No 63 Amps Dp Mcbs For Incoming Supply Doublebusbar Of Adequate Size, 12 No Dp Dc Mcb ( 0-32A ) Including Indication Lamps And Cables And Other Accessories 78 Distribution Panel ( 415 V, Ac ) Made Of Crca Thickness Not Less Than 2Mm. Powder Coated, Degree Of Protection Ip43. 200 Amps Switch Fuse Disconnector For Incoming Supply And 5 No Tpn McbS ( 16-125 Amps ) And 5 No Dp Mcbs ( 0-32A ) , Rectangular Busbar Suitable For 200 Amps Continuous Supply Including Indication Lamps And Cables And Other Accessories 79 Rubber Mat 1Mx2m 3 Mm Thick For 33 Kv 80 Fire Extingiusherco2type Of 4.5 Kg Capacity For Control Room 81 3Sand Bucket Fire Extingiusher 82 Helmet 83 Rubber Gloves For 33 Kv Level 84 Rubber Gloves For 11Kv Level 85 Safety Belt 86 Safety Shoes 87 Hv Detectors For 33 Kv 88 Earthing Rod ( Set Of 3 Rods ) 89 Rmu Along With Out Going Cable 90 33 Kv Ring Main Unit : 3 Way Out Poor Type Rmu, Sf6 Insulated, Extensible Type, At 33 Kv System Voltage And Breaking Capacity 25 Ka For One Second, With Sf6 Circuit Breaker / Vcb Self Powered With O / C+ E / F Relay System Comprsing Of A ) One Nos 33 Kv, 630 Amp. Motorized Isolators Including Earthing Switches With Making Capacity 62.5 Ka, Having Mechnical On / Offb ) Two Nos 33 Kv, 200 Amp Motorized, Spring Operated, Circuit Breakers With Earthing Switchesc ) Cu Bus-Bar Of 630 Amp. Ratingd ) One No Numerical Aux. Self Powered Relay Having Non Directional O / C And E / F Protection ( For Each Circuit Breaker Feeder ) , Relay Should Have Minimum 7-Di & 8-Do. The Relay Shall Also Interface Via An Rs 232 / 485 Port In Orde O Send, As A Minimum, Real Time Readings Using The Modbus Protocol.E ) Incoming Isolators Shall Have Fpi With Electrical Reset Contact / Facility.F ) All Necessary Potential-Free Contacts For Indications Relevent To Rmu Monitoring And Control.G ) Capacitor Voltage Dividers Serving Live-Line Cable Indicators In Each Breaker & Isolator. 91 33 Kv 3 Phase Indoor Terminating Kit To Be Used With Cables-185Mm Sq. 92 33 Kv 3 Phase Out Door Terminating Kit To Be Used With Cables-185Mm Sq. 93 Cable Route Markers 94 Excavation In Any Type Of Soil Including Hard Laterit Soil 95 Refilling Of Excavated Soil 96 Sand For Cushioning Of The Cables In The Trench 97 Cement Tiles Of Size 300 Mm Lengthx 250 Mm Widthx 37 Mm Thick As A Protective Cover For Underground Cables 98 Earthing Of Rmu- Excavation Of Earth Pit Of Dia 650 Mm & Depth 3000 Mm, Installation Of Earthing Pipe Of 40 Mm Nominal Bore & 4 Mm Wall Thickness & Length 2.5 Mtr Long As Per Is 1239. Gi Strip For Neutral Earthing Of Size 75 Mmx10mm & 50 Mm X 6 Mm For Connection Of Rmu Body As Per Is 2629 / 85, Gi Nuts And Bolts, Refilled With Earth Enhancement Materials And Earth Chamber Made Of Brick Masonary With Rcc Slab Cover. 99 Cement Concrete 1:2:4 ( 1 Cement, 2 Coarse Sand, 4 Graded Graniticor Basaltic Stoe Aggregated 40 M Nominal Size Of Foundation ) 100 Centering And Shuttering Including Struttings, Propping Etc. & Removal Of Form Work 101 15 Mm Cement Plaster 1:4 For Foundations. 102 Wire Mesh Boundary Fencing Around The Rmu 103 33 Kv, 3 Core Xlpe Cable Armoured, 185 Mm2 104 Installation Of Capacitor Bank 105 12 Kv, 1.2 Mvar, Capacitor Bank With Vcb Panel With Complete Arrangement For Conection With 11 Kv Incomer Panel , Series Reactor, Isolator, Rvt, Surge Arrestors, Ht Cable With Termination Kits, Control Cables, Crca Cubicle Panel Etc With Structure, Foundation & Accessories. 106 33 Kv Ct / Pt 107 33Kv Ct / Pt Combined Unit, With Ct Ratio 100 / 5 & Ptr 33 Kv / 110 V / V3 , 3-Phase, 50 Hz, Onan Cooled, Outdoor Type. The Combined Unit, Cts And Pts Shall Be As Per Below Specifications.The Rated Burden Of Ct Shall Be 7 Vathe Rated Burden Of Pt Shall Be 20Va Per Phase With Proper Colour Coded Identification. Pts Shall Be Of Uniform Insulating And One Minute Power Frequency Dry Withstand Voltage 70Kv 108 Metering Cubicle For 3Phase 4 Wire Metering System Suitable For 3 Phase, Ht, Tri-Vector Meter With Sealing And Locking Facility Made Of Ms Sheet Steel Thickness Not Less Than 2Mm Duly Power Coat Painted Suitable For Indoor As Well As Outdoor As Per The Site Requirement. The Cubicle Shall Be Painted Through 7-Tank Process. The External Dimensions Should Be Adequate. Provided With Synthetic Or Semi Synthetic Gasket Firmly Glued To The Surface, Dust, Weather Andvermin Proof And Shall Comply Degree Of Protection Ip 65 Both The Chambers Having One Sided Hinged Door Arrangements. The Panel Shall Be Provided With Two No Ms Channels Of Size 100 X 50 Mm On The Front And Rear Sides Duly Welded And 4 No Of Lifting Hooks. It Should Be Possible To Take Meter Reading Manually, Through Cmri And Computer Without Opening Door. Including Supply And Fixing Of 75Mm Gi Pipe Between Ct / Pt Combined Unit And Metering Cubicle For Ct / Pt Wiring To Tri-Vector Meter. 109 Gichannel & Angle For Mounting Ct Pt Combined Units With Nuts And Bolts ( Size 100 X 50 X 5 Mm ) 110 3Ph4 Wire Ht Ct / Pt Operated Fully Static Smart Tri-Vector Energy Meters Dlms Compliant Category C With Rs232 Port . 33Kv / V3 / 110V / V3, Ph-N ( 3P, 4W ) Meters For Measurement Of Different Electrical Parameters Including Active Energy ( Kwh / Mwh ) , Reactive Energy ( Kvarh / Mvarh ) , Apparent Energy ( Kvah / Mvah ) Etc. ( Make L&T, Secure Or Abb ) . 111 Pvc Copper Wire Flexible Multi-Strand Of Required Size For Secondary Connections For Ct Wiring The Minimum Wire Size Shall Be 4 Mm2 ( Ryb ) And For Pt Wiring Minimum Wire Size Shall Be 2.5 Mm2 ( Ryb ) . 112 Copper Lugs Preferably Ring Type Duly Crimped For Termination Of Wires And Tapes 113 Acsr Jumpers With Hardware Fittings Like Acsr To Ct / Pt Unit Bush Clamp, Other Hardwares As Per Site Requirement 114 Earthing 40 Mm Gi Pipe Or 20 Mm Gi Rod, 2.5 Mtr For Ct / Pt Combination Unit. Earthing Of Metering Cubicle Through Two No 25 X 5 Mm Flat Iron. 115 11 Kv Indoor Switchgear 116 11 Kv Vcb Panel Board ( 12 Kv, 1250A, 25 Ka, Outdoor ) With O / C, E / F Relays ( Iec61850 ) , Mimic Diagram, Voltmeter, Ammeter, Annunciation Windows With Annunciation Relays, 3-Phase Tri-Vector Meter -5 Amps, Dlms Compliant With Rs-485 Port ( 1 Incomer & 3 Outgoing ) 117 11 Kv Bus Coupler Along With Adaptor Panel 118 11Kv, Gapless Surge Arrestor, 9 Kv , 10 Ka , La With Polymer Housing, Stn. Type ( 4 / 5 / 6 Sets ) 119 100 Kva, 11 / 0.433Kv, 3-Phase Distribution Transformers With Bimetallic Terminal Connectors Energy Level-2, ( Aluminium Wound ) 120 11 Kv Isolater, Double Break, 3-Pole, 600 Amp, Horizental Mounting Type With Earth Switch 121 11Kv Horn Gap, 3-Phase, 3-Pole, 200 Amp 122 Pvc Armoured Cable ( Lt ) , 120Mm2 ( 3.5 Core ) 123 St Poles ( St-410 ) , Sp-33, 9 Mtrs.Long ( For 4 No. O / G Structures And 2 No. Aux Sub Station ) 124 Cement Bottoming 1:2:4 Mix As Per Rec Standards 0.5Cum Per Pole 125 Earthing Complete By Gi Pipe 40 Mm Or Gi Rod 20Mm 2.5 Mtr Long Through Gi Strip 126 Mccb-200 Amp With Enclosure 127 Galvanisedironoff Sorts 128 Earthing Of 100Kva Substation --Excavation Ofearth Pit Of Dia650 Mm & Depth 3000 Mm, Installation Ofearthing Pipe Of 40 Mm Nominal Bore & 4Mm Wall Thickness & Length 2.5 Mtr Long As Per Is 1239.Gi Strip For Neutral Earthing Of Size 75 Mm X10 Mm& 50 Mm X 6 Mmfor Connection Of Transformer Body, G.O Set & Lightening Arrestor As Per Is 2629 / 85, Gi Nuts & Bolts, Refilled With Earth Enhancement Materials And Earth Chamber Made Of Brick Masonary With Rcc Slab Cover. 129 11 Kv Xple Power Cables 130 11 Kv, 630 Mm² Single Core Xlpe Armoured, Frls. ( With One Spare Length ) 131 11 Kv, 3- Core, Xlpe 185 Mm² Armoured, Frls, 132 11 Kv Indoor Heat Shrinkabler Cable Termination Kits For 630 Mm Sq. Single Core Cable. Id / Od 133 11 Kv Outdoor Heat Shrinkabler Cable Termination Kits For 185 Mm Sq. Three Core Cable. Id / Od

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

Jammu And Kashmir View Result →

50.

Drinking Water Supply and Sanitation #10653248 Price Bid

Supply Of Laptop & Other Equipment Under National Hydrology Project ( Nhp ) .- 1 Photocopier Multi Function Machine- Automatic Document Feeder / Radf, Warm Up Time: 18Sec. Or Less, Paper Capacity: 500*2 Trays ( Minimum 50 Sheet Bypass Tray ) , Counter: 5 Digit Digital, Power: Ac 230+10% Volts 50Hz, Tonner Capacity: 20000 Or Higher, Minimum Numbers Of Copies Taken Per Month: 100000, Copy Paper Size: A3 To A6, Continuous Copy Speed: A4 Paper 1-999, Zoom: 25% To 400% In 1% Step, Copying Resolution: Upto 600X600 Dpi, Copy Mode: Text, Text / Photo, Photo / Color Document, Output: Duplex, Duplex Printing: Automatic / Manual, Printing Speed Upto 32 Ppm A4 Size & 17 Ppm A3 Size Paper, Run Time, First Copy Out Time: Approx 3-5 Sec., Original Size: Maximum A3, Print Resolution: Upto 1200*1200 Dpi, Print Cartridge: Black, Print Technology: Monochrome Laser, Ram: 2Gb, Hard Disk: 320 Gb, Wifi Yes, Drum Life: 600000 Or Higher. 2 Multi Function Machine :Color, Multifunctional System -Minimum Numbers Of Copies Taken Per Month: 100000, Print / Scan / Copy / Optional Fax, Pages Per Minute : Color And Black-Printing Speed Upto 25 Ppm A4 Size & 12 Ppm A3 Size Paper, Warm Up Time : 18 Sec. Or Less, First Page Out:Copy 6.4 Sec. Black & 8.5 Sec. Color, Print: 7.0 Sec. Black & 9.2 Sec. Color, Paper Size: A3 To A6, Display: 10.1 Color Touch Screen Control Panel, Resolution: 1200X1200 Dpi, Ram: 4Gb, Hard Disk Drive: 320 Hdd Standard, Ssd: 8 Gb, Duplex : Standard Stack Less, Continuous Copy Speed: A4 Paper 1-999, Duplex Support Statement, Standard Output Tray: 500 Sheet, Electrical Requirement: 120V., 60 Hz, 12A: 220-240V, 50 Hz, 7.2A, Dimension: 23.7W X 26.2 Dx31.1 H, Compatibility:Window 7 Or Higher, Zoom : 25%-400% In 1% Step Increments, Resolution: 600X600dpi. 3 Laptop- 10Th Gen Intel Core-I7 Processor 15.6” Fhd Laptop ( I7-10750H / 8Gb / Itb, Ssd / Window 10 Pro / Nvidia Gtx 1650 Ti 4 Gb / Shadow Black / 2.36 Kg ) , 15-Ek0018txwith Quick Heal Total Security Antivirus With Three Year Pack * Laptop Of Hewlett, Packard / Dell / Lenovo / Brands Only 4 Firewall Hardware 250 User. Performance : Firewall Throughput ( Mbps ) - Should Be 12, 000 Or Above, Antivirus Throughput ( Mbps ) - Should Be 1, 540 Or Above, Ipsec Vpn Throughput ( Mbps ) - Should Be 7, 100 Or Above, Ssl Vpn Throughput ( Mbps ) - Should Be 700 Or Above, Utm Throughput ( Mbps ) - Should Be 1, 530 Or Above, Interfaces- Should Be Minimum 12 Gbe Or Above, I / O Interfaces - Should Be Minimum 2 Usb Ports Or Above, Concurrent Sessions - Should Be 90, 00, 000 Or Above, Console Port, Branch Office Vpn ( Ipsec / Ssl ) - Should Be Unrestricted, Mobile User Vpn ( Pptp / Ssl ) -Should Be Unrestricted.Product Updates: Supports Regular Product Updates For Bug Fixes, And Small Enhancements, Signature Updates For Antivirus, Ids / Ips, Web Security, Support For Online And Offline ( Manual ) . Backup / Restore: Configuration Backup / Restore, Scheduler For Configuration Backup, Factory Reset. Authentication Server Support: Multiple Authentication Servers Support ( Except Vpn ) , Local, Active Directory, Ldap, Guest Profile And Expiration Feature For Local User And Guest, Support Captive Portal Authentication. Routing: Static Routing, Policy Based Routing On User, Bgp Support, Ospf Support. Firewall: State Ful Firewall, Default Policy / Rules For 40+ Well Know Services With Provision To On / Off., Provision For Custom Rules, Ip / Icmp / Tcp-Related Attack Prevention, Dos &Ddos Attack Prevention, Multiple Zone Support For Security - Lan, Wan, Dmz, Vpn, Firewall, Nat Traversal ( H.323, Sip, Sccp, Mgcp ) - Protocol To Provide Voice And Video Services Over Ip Networks ( Nat 64, Dns 64, Static Nat, Advanced Nat, Dynamic Nat, Pat, And Dhcp V6 ) , Ipv6 Support, Flow Based And Dns Based Web Filtering Inspection Mode, Traffic Logging, Layer8 - User Identity Firewall, Unrestricted User Support. 5 5.1 Split Ac ( Inverter Model ) :- Supply, Installation, Testing And Commissioning Of Split Type Wall Mounted Air Conditioning Unit Of Following Capacity Including Indoor, Outdoor Unit Fitted With Inverter Based Rotary Compressor, Copper Condenser And First Charge Refrigerant R410a. The Condensing Unit Working Range Should Be Capable For Providing Cooling Between + / -5 Deg. C To 50 Deg. C & Heating Within 0 Deg. C To 15 Deg. C Including Connection Of Copper Pipe Of Required Size Upto 3 Mtr., Insulation, Cordless Remote Control, Auto Air Swing Louvers, Wall Stand For Outdoor Unit, Connection Copper Lead Wire, Condensed Water Outlet Pipe 2 Mtr. Complete Etc As Required. Outdoor / Indoor Units Should Be Of Same Make ( Brand ) . 1.5 Tr Star Rating 5 Star 1.8 / 2 Tr Star Rating 5 Star 6 5.2Split Ac ( Inverter Model ) :- Supply, Installation, Testing And Commissioning Of Split Type Wall Mounted Air Conditioning Unit Of Following Capacity Including Indoor, Outdoor Unit Fitted With Inverter Based Rotary Compressor, Copper Condenser And First Charge Refrigerant R410a. The Condensing Unit Working Range Should Be Capable For Providing Cooling Between + / -5 Deg. C To 50 Deg. C & Heating Within 0 Deg. C To 15 Deg. C Including Connection Of Copper Pipe Of Required Size Upto 3 Mtr., Insulation, Cordless Remote Control, Auto Air Swing Louvers, Wall Stand For Outdoor Unit, Connection Copper Lead Wire, Condensed Water Outlet Pipe 2 Mtr. Complete Etc As Required. Outdoor / Indoor Units Should Be Of Same Make ( Brand ) . 1.5 Tr Star Rating 5 Star 1.5Tr Star Rating 5 Star 7 Supply, Installation, Testing And Commissioning Of Ups With Isolation Transformer & Battery For Backup, Minimum Load Power Factor 0.8, Power Factor 0.99, Having Ovcd ( Over Voltage Cut-Off Device ) , Having Cvcf ( Constant Voltage Constant Frequency, Bypass Parameters Configurable, 2 Stage Charging ( Constant Current / Float Charge ) , Having Temperature Compensated Charger, Fan Speed Control, Digital Signal Processor Controller, Total Harmonic Distortion ( Current ) - Thdi ( <10%@50% R Load, Input 1 Phase Voltage 230V, Voltage Range 110-300V, Output Voltage ( 220Ac / 230Ac / 240Ac ± 1% ) , Total Harmonic Distortion Voltage ( Thdv- <3% Linear Load, <5% Nonlinear Load, 90 % Ac / Ac Efficiency, Over Load Capacity ( 105-110%: 3Min, 111-130%: 30Sec ) , Operating Temperature With Full Load 0-40°C, Communication Features ( Rs232, Usb Com Port, Intelligent Slot ( Optional ) . Ups Installation With All Required Material Arrangements As Required As Per Is Specification For 5 Kva ( 1 Phase Input And 1 Phase Output ) 60 Minute Backup, Min. 8000 Vah For E-Tendering And Edp Cell 8 Revolving Chair Heavy Duty, Arm Material: Pu Foam Bonded Chrome Coated, Seat Material Pu Foam Covered With Pure Leather ( Branded ) ( For Edp Cell ) . Material Of Back Cover And Fabric Of Seat: Pure Leather. 9 Printer Multifunction Auto Duplex Laser Printing Speed Upto 20 Ppm, Upto 5000 Pages Per Month, Copy Speed Up To 14 Ppm For Director Hydrometeorology / Data Centre Bhopal For Rtdas / Scada Monitoring Hall & Deputy Director, H / M Dn. No. 3, Rewa.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Madhya Pradesh View Result →

TenderDetail

Loading tenders