View Bid Results For Lead Scrap Tenders

We found 340 Bid Results related to lead scrap tenders. You can find Contractor details who won lead scrap tenders along with contract details in Bid awards announcements section.

Indian Tenders
369
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
150
111
79
Tender Publishing Platform
7
333
State / UT
21
113
50
38
37
16
15
10
10
9
8
7
6
6
3
3
2
2
2
1
1
1
Contract Value
194
39
81
25
Publish Date
2
0
0
0
0
Sector
25
120
80
27
19
15
15
10
10
7
7
5
4
4
3
2
2
2
1
1
1
1
1
1
1
1
Ownership
5
120
94
94
27
5
Within keyword
Active filters:
Showing 1–7 of 340 tenders matching your filters
1.
Power #11435117 AOC
Bids Are invited for Supply, Installation And Commissioning Of 200Ah 250V Dc 116 Cells Plante Type Lead Acid As Per Spec - Supply, Installation And Commissioning Of 200Ah 250V Dc 116 Cells Plante Type Lead Acid Storage Type Battery Bank Along With Spares And Buyback Of Existing Batteries After Deinstallation As Per The Technical Specification And Complete Details Refer Table - A Attached Under Atc. , New Battery : Supply Of 200Ah, 250V Dc, 116 Cells, Plante Type, Lead Acid Storage Type Battery Bank With All Accessories As Per The Technical Specification Attached (Buyback Value Of Old Battery Bank Is Deducted From Supply Value) , Spares: Supply Of List Of Spares Mentioned In Technical Specifications Required For Battery Bank Maintenance After Installation And Commissioning. , Deinstallation And Installation And Commisioning Of New Battery Bank: Removal Of Old Batteries And Shifting To Scrap Yard, Installation Of New Battery Bank, Initial Charging And Conducting Commissioning Tests C10 And Hrd Test As Per Is And Handing Over As Per Attached Technical Specification , Buyback Of Existing /Deinstallated Battery Bank : Buy Back Of 200Ah 250V Dc 116 Cells Plante Type Lead Acid Storage Type Battery Bank Including Connectors. Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 31.63 Lakh
Boards / Undertakings / PSU No of Bidders 1
Tamil Nadu View Result →
2.
Public Administrative Department #11325175 AOC
Tender for Providing And Laying In Position Cment Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering- All Work Up To Plinth Level: (Dsr No. 4.1) , 1:2:4 (1 Cement: 2 Coarse Sand (Zone-Iii) Derived From Natural Sources: 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) (Dsr No. 4.1.3) , 6 Mm Cement Plaster 1:3 (1 Cement : 3 Fine Sand) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of Reinforced Cement Concrete Slabs And Beams (Dsr No. 13.17) , Dismantling Of Flushing Cistern Of All Types (C.I./Pvc/Victirous China) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Meters Lead. (Dsr No.15.52) , Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials Including Malba All Complete As Per Directions Of Engineer-In-Charge (Dsr No. 14.82) , Providing And Fixing Grab Rail Of Stainless Steel Pipe 1-1/4 And Fitting Of Grade Aisi 304 As Per Jis Standard 3448 Including Fitting And Fixing Of Pipe With Clamps At 1.00 M Spacing Including Cutting And Making Good The Walls Complete As Per Direction Of Engineer-In-Charge. (Nsi) , Providing And Fixing Flat Pressed Three Layer Particle Or Graded Plain Wood Board Medium Density Exterior Grade (Grade I) Fpt-I, Conforming And Marked To Frame, Backing Or Studding With Screws Etc. Complete (Frames, Backing Or Studding To Be Paid Separatley. (Dsr No. 9.17) , 12 Mm Thick (Dsr No. 9.17.1) , Providing And Fixing P.V.C. Low Level Flushign Cisern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete (Dsr No. 17.18) , 10 Litre Capacity - White (Dsr No. 17.81.1) , Providing And Fixing Solid Plastic Seat With Lid For Pedestal Type W.C. Pan Complete: (Dsr No. 17.20) , White Solid Plastic Seat With Lid (Dsr No. 17.20.1) , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. (Dsr No. 17.28) , Flexible Pipe (Dsr No. 17.28.2) , 32 Mm Dia (Dsr No. 17.28.2.1) , Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Swashers Complete. (Dsr No. 17.31) , Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is:8931: (Dsr No. 18.49) , 15 Mm Nominal Bore (Dsr No. 18.49.1) , Providing And Fixing C.P. Brass Long Body Bid Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. (Dsr No. 18.51) , 15 Mm Nominal Bore (Dsr No. 18.51.1) , Providing And Fixing C.P. Brass Angle Valve For Basin Mixer Ad Geyser Points Of Approved Quality Conforming To Is: 8931 (Dsr No. 18.53) , 15 Mm Nominal Bore (Dsr No. 18.53.1) , Providing And Fixing C.P. Brass Extension Nipple (Size 15 Mm X 50 Mm) Of Approved Make And Quality Make And Quality As Per Direction Of Engineer-In-Charge (Dsr No. 18.53 A) , Providing And Placing On Terrace (At All Floor Levels) Polythylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangements And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank.(Dsr No. 18.48) , Providing And Fixing Ptmt Pillar Cock Of Approved Quality And Colour. (Dsr No. 18.56) , 15 Mm Nominal Bore, 125 Mm Long Foam Flow, Weighing Not Less Tha 120 Gms. (Dsr No. 18.56.2) , Providing And Fixing 8 Mm Dia C.P./ S.S. Jet With Flexible Tube Upto 1 Meter Long With S..S. Triangular Plate To Eureopean Type W.C. Of Quality And Make As Approved By Engineer- In-Charge (Dsr No. 17.16A) , Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions: (Dsr No. 18.21) , 45 Cm Length (Dsr No. 18.21.2) , 15 Mm Nominal Bore (Dsr No. 18.21.2.1) , Regarding Terracing Of Mud Phaska Covered With Tiles Or Brick, In Cement Mortar By Dismantling Tiles Or Bricks, Removing Mud Plaster, Preparing The Surface Of Mud Phaska To Proper Slope, Relaying Mud Plaster Gobri Leaping And Tiles Or Bricks, Grouted In Cement Mortar 1:3 (1 Cement: 3 Fine Sand), Including Replacing Unserviceable Tiles Or Bricks With New Ones And Disposal Of Unserviceable Material To The Dumping Ground (The Cost Of The New Tiles Or Brick Excluded), All Complete As Per Direction Of Engineer-In-Charge. (Dsr No. 14.13) , Making Khurras 45 X 45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over P.V.C. Sheet 1M X 1M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement, Rounding The Edges And Making And Finishing The Outlet Complete (Dsr No. 12.22) , Providing And Fixing Led Tubelight Complete In All Respects. Make: Havells/Phillips/Usha (Nsi) , Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacturer Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour (Dsr No. 13.81) , Old Work (One Or More Coats (Dsr No. 13.81.1) , Finishing Walls With Acrylic Smooth Exerior Paint Of Required Shade: (Dsr No. 13.111) , Old Work (Two Or More Coat Applied @ 1.67 Ltr/ 10 Sqm) On Existing Cement Paint Surface (Dsr No. 13.111.1) , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. (Dsr No. 18.12) , 25 Mm Dia Nominal Bore (Dsr No. 18.12.3) , Providing And Fixing Gun Metal Gate Valve C.I. Wheel Of Approved Quality (Screwed End) : (Dsr No. 18.17) , 25 Mm Nominal Bore (Dsr No. 18.17.1) , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Andic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete: (Dsr No. 9.97) , 200X10mm (Dsr No. 9.97.3) , Providing And Fixing And Installation Of Ventilation Ms Exhaust Fan 300 Mm With Frame, Nut, Bolt Etc Make Khaitan, Havells/Crompton/Gec Complete In All Respect As Per The Satisfaction Of Engineer In Charge (Nsi) , Providing And Fixing The Louvers Complete With Frame For Exhaust Fan Of 12 Diameter (Nsi) , Providing And Fixing And Installation Of Double Ball Bearing Ceilig Fan 48 Make Kahitan, Havells, Orient, Crompton Complete In All Respects As Per The Satisfaction Of Engineer-In-Charge (Nsi) , Replacement And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New York): (Dsr No. 18.46) , 15 Mm Nominal Bore (Dsr No. 18.46.1) , Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete (Dsr No. 13.88) , Providing And Applying White Cement Bases Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. (Dsr No. 13.80) , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Includig Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: (Nsi Based Dsr No. 17.1) , White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests (Nsi Based Dsr No. 17.1.1) , Providing And Fixing White Vitreous China Pedestal Type Water Closed (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required (Nsi Based Dsr No. 17.2) , W.C. Pan With Isi Marked White Solid Plastic Seat And Lid (Nsi Based Dsr No. 17.2.1) , Providing And Fixing Of Pvc Pipe Including Specials Labour For Fixing Treching Refilling Pvc Solvent And Testing As Per Satisfaction Of Eic (Nsi) , 2 Dia, Pvc Pipe, Make: Prince/Diplast/Supreme/Finolex (Nsi) , Providing And Fixing Pv Fitting Including Labour And Refilling Pvc Solvent And Testing As Per Satisfaction Of Eic (Nsi) , Single Tee Size 50X50x50 Mm (Nsi) , Bend 87.5 Degree Size 50 Mm Bend (Nsi) , Providing And Fixing Ptmt Grating Of Approved Quality And Colour (Dsr No. 18.58) , Circular Type (Dsr No. 18.58.1) , 125 Mm Nominal Dia With 25 Mm Waste Hole (Dsr No. 18.58..1.2) , Providing And Fixing 50 Watt Led Flood Light With Bracket Outside On The Wall Complete In All Respects (Nsi) , Wiring For Light Point/Fan Point/ Exhaust Fan Point/Call Bell Point With 1.5 Sq. Mm Frls Pvc Insulated Coppre Condctor Single Core Cable In Surface/Recessed Medium Class Pvc Conduit, With Modular Weith, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Counductor Single Core Cabe Etc. As Required. (Dsr Elec. No. 1.3.1) , Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate & Switch Box Including Connections Excluding Modular Plate Etc. As Required. (Dsr Elec No. 1.24) , 15/16 A Socket Outlet (Dsr Elec No. 1.24.3) , 6 Pin 15/16 A Socket Outlet (Dsr Elec. No. 1.24.5) , Providing And Fixing In Position Pre-Cast Reinforced Cement Concrete Manhole Cover And Frame Of Required Shape And Approved Quality (Dsr No. 19.19) , Hd- 20 (Dsr No. 19.19.2) , Square Shape 450 Mm Internal Dimension (Dsr No. 19.19.2.1) , Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete: (Dsr No. 18.18) , 20 Mm Nominal Bore (Dsr No. 18.18.2) , Providing And Fixing Cp Flange Isi Marked 15 Mm Complete In All Respects (Nsi) , Providing And Fixing Ptmt. Push Cock Of Approved Quality And Colour (Dsr No. 18.57) , 15 Mm Nominal Bore, 98 Mm Long, Weighing Not Less Than 110 Gms. (Dsr No. 18.57.1) , Providing And Fixing Ptmt 15 Mm Urinal Spreader Size 95X69x100 Mm With 1/2 Bsp Thread And Shapes, Weighing Not Less Than 60 Gms. (Dsr No. 17.75) , Providing And Fixing Of 32 Mm C.P. Brass Waste Of Standard Pattern Complete In All Respect (Nsi) , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is : 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom, And Sides Wih Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing/ Panellig, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Panelling And Dash Fasteners To Be Paid For Separately) : (Dsr No. 21.1) , For Fixed Portion (Dsr No. 21.1.1) , Anodised Aluminum (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Aodic Coating Of Grade Ac 15) (Dsr No. 21.1.1.1) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pipe, Spreaders With Unions And Clamps (All In C.P. Brass) With Waste Fitting As Per Is : 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Wherever Required: (Dsr No. 17.5) , Single Half Stall Urinal With 5 Litre P.V.C. Automatic Flushing Cistern (Dsr No. 17.5.1) , Providing And Fixing Of Sub Boards Of Various Sizes With Remark Printing, Lamination Etc. Complete In All Respects (Nsi) , Sun Board Printing With Lamination 5 Mm Sun Bouard Size 12 X 12 (Nsi) , Sun Board Printing With Lamination 5 Mm Sun Bouard Size 12 X 18 (Nsi) , Sun Board Printing With Lamination 5 Mm Sun Bouard Size 72 X 24 (Nsi) , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete (Dsr No. 13.91) , Providing And Fixing Sanitary Napkin Vending Machine, Incinerator, Battery And Happy Days Pad Complete In All Respects (Heavy Duty, Superior Quality, Isi Marked) (Nsi) , Note: Credit Against Old Material To Be Taken As Per Actual I.E. (I) Old Plastic @ Rs. 20/Kg (Ii) Old Ms Scrap @ Rs. 35/Kg (Iii) Old Aluminium Doors & Windows @ Rs. 200/Kg
Contract Date: Jun 22, 2026 Contract Value : ₹ 2.52 Lakh
Local Bodies No of Bidders 4
Chandigarh View Result →
3.
Power #11312590 Price Bid
Tender for Providing/Supply And Erection Of The Following Decentralised Material By Contractor With All The Accessories To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms), , Holding Clamp With Bolt & Nut , Stone Pad , Grouting Of Pole , Natural Water Level Earthing , Plinth With Fancing For 250 Kva T/F , Earthing Complete , Ms Channal Top , Ms Channal Dropper , Ms Angle T/F Base , Suspension Clamp With I Hook , Dead End Clamp With I Hook , Lt Piercing Connector 120/95/70 Sqmm , F-Bracket , Safe Carriage And Proper Erection/ Installation/Fabrication/Laying/Fixing/Binding Etc. Of The Following Centralised Material With All The Accessories From Esc Bijnor/Dhampur To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms) , Plain Cement Concrete Pole 8.5 Mtr Long , 11 Kv Disc Insulator With Fitting , 11 Kv Pin Insulator With Pin , 11 Kv Fuse Set , 25 Kva T/F , Acsr Weasel Conductor , Tf 11/0.4 Kv 250 Kva , 1X240 Sqmm Xlpe Cable , Connecting Lead 1*16 Sqmm , Lt Distribution Box , Lt Abc 3*50+1*35+1*16 Sq Mm , Lt Abc 3*120+1*95+1*16 Sq Mm , Lt Xlpe Cable 3.5X70 Sqmm , Lt Abc 3*95+1*70+1*16 Sq Mm , Connecting Lead Abc Cable 1*25+1*16 Sqmm , Dismantling Of Structures/ Line And Received Back Of The Scrap Material From Site To Esc Bijnor/ Dhampur With Loading & Unloading At Both Ends Respectively (As Per Resspo Norms) , 10 Kva Tf , 100 Kva T/F
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Uttar Pradesh View Result →
4.
Power #11312586 Price Bid
Tender for Providing/Supply And Erection Of The Following Decentralised Material By Contractor With All The Accessories To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms), , Natural Water Lavel Earthing (Vcb & Others) , Wti/Oti , Spring Charging Motor Suitable For 33Kv Vcb , 11 Kv Control Realy As Per The Sample Provided By The Concern Engineer , Relay As Per The Sample Provided By The Concern Engineer , Control Cable 4X2.5Sqmm , Plinth , Fencing , Dropper Channel , Top Channel , Clamp , T-Off Channel , Danger Board With Clamp , Stay Complete , Earthing Complete , Providing, Fabrication And Fixing Of Henley Type Tailless Units With Frame Of Size 2.5Mx60cmx2.5M Made Of Ms Angle 50Mmx3mm With Fixing Of 02 Nos. Henley Type Tailless Units For Double Circuit Containing 06+06 No. Incoming/ Outgoing Studs Of 500 Amp/630 Volts, Made Out Of Copper And Rod Made Of Brass Along With 01 Neutral Made Of Brass & 03 +03 Back Entry Made Of Brass & Having 07 +07 Lt Porcelain Insulator Fixed In Holding Clamp Made Of M.S Strip. Both Tailless Unit Should Be Connected With Copper Bus Bar Of Size 400Mmx50mmx 10 Mm (As Per Site Requirement & As Per Drawing).Grouting Tailless Frame With Cement And Concrete On The Plinth Of 160 Kva T/F & Above With Making The Connection At T/F And Line Side With Suitable Size Aluminum Crimping Lugs 400 Sqmm For Completing The Work All Material Shall Be Provided By The Contractor. Only Cable/Lead For Connection Will Be Provided By The Department (With Cartage And Laying Of Lt Xlpe/Pvc Cable From Esc Bijnor/Dhampur With Loading And Unloading To The Site By The Contractor) (Work And Items Should Be As Per The Respo Norms). Earthing Of M.S. Angle Frame Structure And Tailless Unit With M.S. Earthing Rod Complete In All Respect (Earthing Rod And Grouting Of Earthing Will Be Provided By Contractor). Providing & Fixing Of Tin-Copper Fuses Strip/Wire Of Different Swg Size Suitable For Tailless Unit In All Phases In All Respect.Note:- (Above Wiil Be Assumed As One Unit) , Safe Carriage And Proper Erection/ Installation/Fabrication/Laying/Fixing/Binding Etc. Of The Following Centralised Material With All The Accessories From Esc Bijnor/Dhampur To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms) , 11 Kv Vcb Incoming , 11 Kv Vcb Outgoing , 33 Kv Vcb 1250 A , 33 Kv Ct 400/200/1-1-1A , 33 Kv Pt Outdoor 33Kv/110V , 33 Kv Control Pannel For Double T/F , 11 Kv Bus Coupler , 33 Kv La , 24 Volt Battry Set , Battry Charger , 33 Kv Control Pannel For Single Feeder , 33 Kv Fuse Set , 33 Kv Line Isolator , 33 Kv Bus Isolator , 3X95 Sqmm Ab Cable , Acsr Weasel Conductor , Disc Insulator With Fitting , Pin Insulator With Nut Pin , Plain Cement Concrete Pole 8.5 Mtr Long , Lt Xlpe 1X1000 Sqmm Cable At Desired Place As Per The Instruction Of Concern Engineer. , Lt Xlpe Cable Al. 1X240 Sq.Mm , Lt Xlpe Cable Al. 1X400 Sq.Mm , Dismantling Of Structures/ Line And Received Back Of The Scrap Material From Site To Esc Bijnor/ Dhampur With Loading & Unloading At Both Ends Respectively (As Per Resspo Norms) , 11 Kv Vcb Incoming/Outgoing (Shabby)/ Iran Scrap Vcb , Damage 33 Kv Vcb , Damage 33 Kv Ct 400/200/1-1-1A , Damage 33 Kv Control Pannel For Double T/F , Battry Set , Damage 33 Kv Control Pannel For Single Feeder , Relay , 33 Kv Fuse Set , 33 Kv Line & Bus Isolator , Battery Charger 20 Volt , Damage Lt Xlpe Cable
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
5.
Power #11312585 Price Bid
Tender for Providing/Supply And Erection Of The Following Decentralised Material By Contractor With All The Accessories To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms), , Stone Pad , Concreating Of Pole , Suspension Clamp , Dead And Clamp , Lt Peircing Connector For 95 Sqmm , Earthing Complete , Clamp For Lt T-Off With Bolts & Nuts , Suspension Clamp With I Hook , Lt Peircing Connector For 120/95/50 Sqmm , Dead End Clamp With I Hook , Clamp For D-Box , Safe Carriage And Proper Erection/ Installation/Fabrication/Laying/Fixing/Binding Etc. Of The Following Centralised Material With All The Accessories From Esc Bijnor/Dhampur To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms) , Plain Cement Concrete Pole 8.5 Mtr Long , Connecting Lead 1X16 Sqmm , Lt Distribution Box , Lt Abc 3X120+1X95+1X16 Sqmm , Lt Abc 3X95+1X70+1X16 Sqmm , Lt Abc 3X50+1X35+1X16 Sqmm , Connecting Lead Ab Cable 1X25+1X16 Sqmm , Dismantling Of Structures/ Line And Received Back Of The Scrap Material From Site To Esc Bijnor/ Dhampur With Loading & Unloading At Both Ends Respectively (As Per Resspo Norms) , Scrap Acsr Weasel Conductor , Abc Conductor Scrap
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Uttar Pradesh View Result →
6.
Power #11312582 Price Bid
Tender for Providing/Supply And Erection Of The Following Decentralised Material By Contractor With All The Accessories To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms), , Holding Clamp With Bolt & Nut , Clamp With Bolt & Nut , Danger Board With Clamp , Stone Pad , Grouting Of Pole , Natural Water Level Earthing , Plinth With Fancing For 250 Kva T/F , Copper L Piece 62X225x12 , Al Lug , Earthing Complete , Stay Set Complete , Ms Channal Top , Ms Channal Dropper , Ms Angle T/F Base , Ms T-Off Channel , Suspension Clamp With I Hook , Dead End Clamp With I Hook , Lt Piercing Connector 50 Sqmm , Pipe Earthing , Clamp , Nut & Bolt , Dead End Clamp , Lt Piercing Connector 120/95/70 Sqmm , Abc Hook , Lt Xlpe 1X35 Sqmm Cable , Providing, Fabrication And Fixing Of Henley Type Tailless Units With Frame Of Size 2.5Mx60cmx2.5M Made Of Ms Angle 50Mmx3mm With Fixing Of 02 Nos. Henley Type Tailless Units For Double Circuit Containing 06+06 No. Incoming/ Outgoing Studs Of 500 Amp/630 Volts, Made Out Of Copper And Rod Made Of Brass Along With 01 Neutral Made Of Brass & 03 +03 Back Entry Made Of Brass & Having 07 +07 Lt Porcelain Insulator Fixed In Holding Clamp Made Of M.S Strip. Both Tailless Unit Should Be Connected With Copper Bus Bar Of Size 400Mmx50mmx 10 Mm (As Per Site Requirement & As Per Drawing).Grouting Tailless Frame With Cement And Concrete On The Plinth Of 160 Kva T/F & Above With Making The Connection At T/F And Line Side With Suitable Size Aluminum Crimping Lugs 400 Sqmm For Completing The Work All Material Shall Be Provided By The Contractor. Only Cable/Lead For Connection Will Be Provided By The Department (With Cartage And Laying Of Lt Xlpe/Pvc Cable From Esc Bijnor/Dhampur With Loading And Unloading To The Site By The Contractor) (Work And Items Should Be As Per The Respo Norms). Earthing Of M.S. Angle Frame Structure And Tailless Unit With M.S. Earthing Rod Complete In All Respect (Earthing Rod And Grouting Of Earthing Will Be Provided By Contractor). Providing & Fixing Of Tin-Copper Fuses Strip/Wire Of Different Swg Size Suitable For Tailless Unit In All Phases In All Respect.Note:- (Above Wiil Be Assumed As One Unit) , Safe Carriage And Proper Erection/ Installation/Fabrication/Laying/Fixing/Binding Etc. Of The Following Centralised Material With All The Accessories From Esc Bijnor/Dhampur To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms) , Plain Cement Concrete Pole 8.5 Mtr Long , 11 Kv Disc Insulator With Fitting , 11 Kv Pin Insulator With Pin , 11 Kv Fuse Set , 25 Kva T/F , Acsr Weasel Conductor , Tf 11/0.4 Kv 250 Kva , Lt Pvc Cable Al 1X240 Sqmm , Lt Distribution Box , Lt Abc 3*50+1*35+1*16 Sq Mm , Lt Abc 3*120+1*95+1*16 Sq Mm , Lt Xlpe Cable Al. 1X120 Sq.Mm , Lt Xlpe Cable Al. 1X240 Sq.Mm , Lt Xlpe Cable Al. 1X400 Sq.Mm , Dismantling Of Structures/ Line And Received Back Of The Scrap Material From Site To Esc Bijnor/ Dhampur With Loading & Unloading At Both Ends Respectively (As Per Resspo Norms) , 10 Kva Tf , 100 Kva T/F , 160 Kva T/F
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Uttar Pradesh View Result →
7.
Power #11307709 Price Bid
Tender for Work Of Installation Of 100 Kva New T/F On Double Pole With All Accessories As Per Resspo Norms. With Cartage From Store To Site Loading & Unloading , Work Of Installation Of 250 Kva New T/F On Plinth With All Accessories As Per Resspo Norms. With Cartage From Store To Site With Loading & Unloading From Both Side , Work Of Installation Of 250 Kva T/F In Place Of 100 Kva T/F On Plinth With All Accessories As Per Resspo Norms. With Cartage From Store To Site With Loading & Unloading From Both Side , Work Of Installation Of 400 Kva T/F In Place Of 250 Kva T/F With All Accessories As Per Respo Norms. With Cartage From Store To Site With Loading & Unloading From Both Side , Work Of Installation Of 11 Kv Vcb I/C Ctr 600/300/5A, 350Mva, 24 Volt & O/G Ctr 200/100/5A, 350 Mva, 1250 annual periodical maintenance & 11 Kv Bus Cupler With All Accessories As Per Respo Norms. With Cartage From Store To Site With Loading & Unloading From Both Side , Erection Of Single Pole With 8.5/9 Mtr Long. Plain Cement Concrete Pole By Digging Suitable Pits In Hard/Soft Soil/ Rock And Its Back Filling Including Concreting And Grouting Of Pols And Fixing Of All Accessories . Work Shall Be Done As Per Respo Specification. Grouting Meterial To Be Provided By Bidder With Cartage From Store To Site. , Erection Of Single Pole With 11 Mtr Long. Plain Cement Concrete Pole By Digging Suitable Pits In Hard/Soft Soil/ Rock And Its Back Filling Including Concreting And Grouting Of Pols And Fixing Of All Accessories . Work Shall Be Done As Per Respo Specification. Grouting Meterial To Be Provided By Bidder With Cartage From Store To Site. , Erection Of Single Pole With 13 Mtr Long Stp Pole By Digging Suitable Pits In Hard/Soft Soil/ Rock And Its Back Filling Including Concreting And Grouting Of Pols And Fixing Of All Accessories . Work Shall Be Done As Per Respo Specification. Grouting Meterial To Be Provided By Bidder With Cartage From Store To Site. , Fixing Of 11 Kv Do Fuse Set With Cartage From Store To Site. , Providing & Fixing Of Top Channel With Cartage From Store To Site. , Providing & Fixing Of Dropper Channel With Cartage From Store To Site. , Fixing Of Battery Charger 24 Volt & Battery Set 12X2 Volt 200 Ah With Cartage From Store To Site. , Providing & Fixing Of Chemical Earthing For T/F ( Netural & Body) Though Gi Connecting Strip (50X6mm) As Per Site Requirement. , Providing & Construction Of New Plinth For New Transformer With Sand, Raw Material Etc (Size 2X2x1.5 M) , Providing & Fixing Of Fencing For New Transformer With All Material Required Material. (Size 4X3x3 M) , Providing & Construction Of New Plinth On Existing Transformer With Sand, Raw Material Etc (Size 2X2x1.5 M) With Dismantelling Of Exist T/F And Supply Resume By Trolly Transformer Which Take Away From Naipura/ Dlf S/S To Site. After Comp[Letion Of Work Re Installment Of T/F With Connecting All Previsouly Used Accesories And Trolly Transformer Sent Back To S/S Naipura / Dlf. With Required Machines (Hydra/Crane) , Providing & Construction Of New Fencing On Existing Transformer With All Material Etc (Size 4X3x3m) , Providing & Installation Of Henely Type Tailess Units 500 annual periodical maintenance 650 Volt Consisting Of 06 Nos. Brass Back Entry, 06 Nos U-Type Spring Contact Made Of Copper, Brass Coupling With Porcelain Fitted On The G.I. Sheet 16 Swg With Arrangement Of 01 Nos Neutral. The Tailess Fuse Unit Frame Made Of 65X65x6mm M.S Angle/Painted With Fixing Of All Above Things. The Tailess Frame On The Plinth 160/250/400/500/630 Kv T/F With Making The Connection Of T/F And Line Side Completed Work All Material Shall Be Provided By The Contactor. The Frame Of The Tailess Unit Is To Be Grouted Are Depth Of 2 Feet Below The Ground Level & There Should Be A Gap Of 1 Feet Between The Ground Surface & The Main Tsiless Unit. (1 Tailess Unit Means Avg. 3 Circuits At 1 T/F) , Providing & Fixing Of Pg Clamp For Connecting New Dt With Existing 11Kv Line And Also For 11Kv Line Sth. & 33 Kv Line Sth. For Jumpering As Per Site Requirement. , Fixing Of 11 Kv Disc Insulator T & C Type 45 Kn With Disc Fitting With Cartage From Store To Site. , Fixing Of 33 Kv Disc Insulator B & C Type 70 Kn With Disc Fitting With Cartage From Store To Site. , Fixing Of 33 Kv Pin Insulator With Fitting With Cartage From Store To Site. , Fixing Of 11 Kv Pin Insulator With Pin With Cartage From Store To Site. , Fixing Of 3 Phase Distribustion Box With Cartage From Store To Site. , Fixing Of 11 Kv & 33 Kv Stay Set With Cartage From Store To Site. , Fixing Of 33 Kv Control Pannel For Single T/F With All Required Material As Per Respo Norms.& Cartage From Store To Site , Fixing Of 33 Kv Line/Bus Isolator With Cartage From Store To Site. , Providing & Fixing Of Lt Al. Crimping Lug All Size With Cartage , Providing & Fixing Of Clamps With Nut& Bolt All Type With Cartage , Providing & Fixing Of Suspension Clamp With J Hook With Cartage , Providing & Fixing Of Concerting Of Stay Set With Cartage , Providing & Fixing Of Lt Piercing Connector With Cartage , Providing & Fixing Of Ms Nut & Bolt Off Size With Cartage , Providing & Fixing Of Dead And Clamp With I Hook With Cartage , Providing & Fixing Of Copper L-Piece 50X225x10 Mm With All Required Material As Per Respo Norms. , Providing & Fixing Of Barbed Wire Gi With All Required Material As Per Respo Norms. , Providing & Fixing Of Danger Board With All Required Material As Per Respo Norms. , Providing & Fixing Of Cable Route Marker With All Required Material As Per Respo Norms. , Providing & Fixing Of Lt Pvc Cable 1X16 Sqmm With All Required Material As Per Respo Norms. , Providing & Fixing Of Metal Frame For Battery Set With All Required Material As Per Respo Norms. , Providing & Fixing Of T-Off Channel (125X65x130 Mm) With Cartage , Laying Of 1X400 Xlpe Cable With Cartage From Store To Site. , Laying Of 1X630 Xlpe Cable With Cartage From Store To Site. , Laying Of 1X240 Xlpe Cable With Cartage From Store To Site. , Laying Of 1X120 Xlpe Cable With Cartage From Store To Site. , Laying Of Armoured Control Cable 4X2.5 Sqmm & Proper Termination From T/F To Control Panel With Cartage From Store To Site. , Laying Of Armoured Control Cable 2X2.5 Sqmm & Proper Termination From T/F To Control Panel With Cartage From Store To Site. , Providing And Commissioning Maintenance Free Water Level Earthing Set Including Electrode, Earth Pit Chamber, Backfill Compound, Watering Pipe And Earth Lead Complete As Required. , Providing & Fixing Of Gi Pipe 6 Dia With Cartage. , Providing & Fixing Of Hdpe Pipe Pn-6, Pe-80, 140 Mm With Cartage , Providing & Fixing Of 11 Kv F-Bracket With All Required Material As Per Respo Norms With Cartage , Providing & Fixing Of 33 Kv F-Bracket With All Required Material As Per Respo Norms With Cartage , Laying Of Lt Abc 3X95+1X70+1X16sqmm With Cartage From Store To Site. , Laying Of Lt Abc 3X120+1X95+1X16sqmm With Cartage From Store To Site. , Cartage Of 3X185 Sqmm 11 Kv Xlpe Cable From Store To Site. , Cartage Of 3X300 Sqmm 11 Kv Xlpe Cable From Store To Site. , Cartage Of 3X300 Sqmm 33 Kv Xlpe Cable From Store To Site. , Laying Of 3X185 Sqmm 11 Kv Xlpe Cable , Fixing Of I/D & O/D Jointing Kit Suitable For 33 Kv 3X185 Sqmm Xlpe Cable With Cartage From Store To Site. , Laying Of 3X300 Sqmm 33 Kv Xlpe Cable. , Fixing Of O/D Jointing Kit Suitable For 33 Kv 3X300 Sqmm Xlpe With Cartage From Store To Site. , Laying Of 3X300 Sqmm 11 Kv Xlpe Cable With Cartage From Store To Site. , Fixing Of O/D Jointing Kit Suitable For 11 Kv 3X300 Sqmm Xlpe With Cartage From Store To Site. , Fixing Of I/D Jointing Kit Suitable For 11 Kv 3X300 Sqmm Xlpe With Cartage From Store To Site. , Providing & Laying Gi 6Swg Wire For Earthing Complete In All Respect , Laying Of 3X185 Sqmm 11 Kv Xlpe Cable By Hdd (Horizontal Directional Drilling) Method Including Pilot Drilling, Reaming, Along With 140 Mm Pe80 Pn-6 Hdpe Pipe Insertion, Cable Pulling, Pit Excavation And Restoration Complete. , Laying Of 3X185 Sqmm 33 Kv Xlpe Cable By Hdd (Horizontal Directional Drilling) Method Including Pilot Drilling, Reaming, Along With 140 Mm Pe80 Pn-6 Hdpe Pipe Insertion, Cable Pulling, Pit Excavation And Restoration Complete. , Fixing Of 11 Kv V Type Cross Arm With Cartage From Store To Site. , Fixing Of 33 Kv V Type Cross Arm With Cartage From Store To Site. , Providing & Fixing Of T/F Base Angle (75X75x2028 Mm) With Cartage , Laying, Binding , Sagging And Jumpring Etc. Of Acsr Weasel Conductor On The Pole As Per Resspo Specification And As Per Direction Of Engineer In Charge It Includes Cost Of Labour, T & P Carrier Etc. Required For Proper Completion Of Work With Cartage From Store To Site. , Laying, Binding , Sagging And Jumpring Etc. Of Acsr Rabbit Conductor On The Pole As Per Resspo Specification And As Per Direction Of Engineer In Charge It Includes Cost Of Labour, T & P Carrier Etc. Required For Proper Completion Of Work With Cartage From Store To Site. , Laying, Binding , Sagging And Jumpring Etc. Of Acsr Dog Conductor On The Pole As Per Resspo Specification And As Per Direction Of Engineer In Charge It Includes Cost Of Labour, T & P Carrier Etc. Required For Proper Completion Of Work With Cartage From Store To Site. , Dismentling Old & Used Conductor & Re-Sagging From Old Pole To New Pole On Site With All Previsiouly Used Accessories. Due To Replacement Of Old & Used Pole For Increasing Height Of Existing Line Above The Gorund As Per Respo Noms. , Dismentling & Cartage Of Scrap Material Like Conductor, Pole, Ab Cable, X Arm, Bus Isolator Etc Loading & Unloading At Both End Received Back From Site To Central Store. , Dismenthing & Cartage Of Damage 11 Kv Vcb, 33 Kv Vcb & 33 Kv Control Pannel With Loading & Unloading At Both End Received Back From Site To Central Store Ghaziabad. , Dismentling & Cartage Of Old And Used 100/250 Kva T/F Due To Incr. / Add. T/Fs With Loading & Unloading At Both End Received Back From Site To Central Store. , Dismentling Of Old Plain Cement Concrete Pole
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
8.
Water Resources and Irrigation #11301526 Technical Bid
Tender for Replacement Gs Sheet Shed Of Bml Down & Hansi Main Branch Headgates & Gearing System At Anta Complex In W/S Mech. Sub Division Jind. , Works Details , Providing &Jixing Or Corrugated G.S. Sheet Roofing Including Vertical/Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts. And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Tilled With White Lead Including A Coat Of Approved Steel Primer And Two Coats Of Apptovcd Paint On Overlapping Of Sheetq Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaced ) As Per Hsr Item No. 9.22.2 (0.80 Mm Thick With Zinc Coating Not Less Than 275 Gm/Square M) , Credit Old Scrap.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Haryana View Result →
9.
Tourism #11286759 AOC
Tender for Civil Works , Earth Work In Excavation Over Areas Of All Type Strata Comprising Of All Type Of Strata Comprising Of Any Type Of Material Such As Soil,Silt,Clay,Sand,Gravel,Murum Of All Varieties, Shingles, Pebbles, All Type Of Congolmerates,Latrite Rock,Soft Rock,Ordinary Rocks,Disintegrated Rocks,Fissued/Shattered Rocks,Decomposed Rocks,Weathered Rocks And All Such Materials Either In Full Or Part As The Case May Be Adopting Any Method/Methods As May Be Conveninet Or Permitted ( Blasting Provibhited ) Including Chiselling ,Wedging,Etc , In All Conditions Such As Dry , Moist ,Foul, Saturated , Submerged ,Etc. , As Directed By The Engineer Etc., All Complete Including Dressing Of Side Ramming Of Bottom Including All Leads And Lifts Including Getting Out Excaveted Soil As Directed . Including Pumping And Bailing Out Water ,Baricading,Danger Lightening ,Guarding As Directed . , Earthwork In Excavation In Trenches For All Leads & Lifts In All Type Of Strata Comprising Of Any Type Of Materials Either In Full Or Part As The Case May Be Adopting Any Method/Methods As May Be Convenient As Permitted Excluding Blasting In All Conditions Such As Dry, Moist, Foul, Saturated, Submerged, Etc,. Including Dressing Of Sides, Planking & Strutting, Timbering ,Ramming Of Bottom ,Pumping And Bailing Out Water ,Barricading Danger Lighting Guarding And Carting Away Excess Excavated Earth At The Site Identified By The Contractor And Obtaining All Statutory Approvals, As Directed By Engineer For All Leads & Lifts Etc. Complete , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading
Contract Date: Jun 15, 2026 Contract Value : ₹ 6.09 Crore
Government Departments No of Bidders 2
Goa View Result →
10.
Power #11266823 Price Bid
Tender For Transformer Increasing Work Under Edd Chandausi And Sambhal= 1 For Edd Chandausi And Sambhal 2 Safe Carriage Of The Following Centralised Material From Store Centre To Site /Je Store With Loading & Unloading At Both Ends Respectively. 3 11 Kv Fuse Set 4 11 Kv Pin Insulator (Polymeric) 5 11 Kv Pin With Nut(Polymeric) 6 11 Kv Tpmo 7 11/0.4 Kv T/F 63 Kva 8 11/0.4 Kv T/F 100 Kva 9 11/0.4 Kv T/F 250 Kva 10 Abc Cable 3*120+1*95+1*16Mm Sq. (5% Sag+ 1 %Connection) 11 Acsr Wesal Insulated Conductor 11 Kv 12 Earthing Of Pole By Ms Earthing Rod Of 20X2500Mm & 6 Swg Earthing Wire Etc 13 Lt Xlpe Cable Al 1X400 Sq Mm 14 Pcc Poles 8.5 Mtr. Long 15 Stay Set Complete 16X1800 16 Stay Wire 7/8 Swg 17 Proper Installation/Fabrication/Laying/Fixing/Binding Etc. Of The Following Material With All The Accessories (As Per Resspo Norms) 18 11 Kv Fuse Set 19 11 Kv Pin Insulator (Polymeric) 20 11 Kv Pin With Nut(Polymeric) 21 11 Kv Tpmo 22 11/0.4 Kv T/F 63 Kva 23 11/0.4 Kv T/F 100 Kva 24 11/0.4 Kv T/F 250 Kva 25 Abc Cable 3*120+1*95+1*16Mm Sq. (5% Sag+ 1 %Connection) 26 Acsr Wesal Insulated Conductor 11 Kv 27 Earthing Of Pole By Ms Earthing Rod Of 20X2500Mm & 6 Swg Earthing Wire Etc 28 Lt Xlpe Cable Al 1X400 Sq Mm 29 Pcc Poles 8.5 Mtr. Long 30 Stay Set Complete 16X1800 31 Stay Wire 7/8 Swg 32 Provinding And Installation/Fixing Of The Following Decentralised Material With All The Accessories (As Per Resspo Norms) 33 Abc Suspension Clamps With I-Hook 34 Al Leg Long Barrel Off Size (Ls) 35 Concreting Of Stay 36 Copper L-Piece 62X225X12 Mm (Ls) 37 Cost Of Earthing For G.I. Pipe Bore Earthing 100 Feet Deep Clamp Dia 40 Mm Including Accessories & Fitting For T/F One No Neutral One No Body. As Per Standard 38 Dead End Clamp With I-Hook 39 Fancing 40 Henley Type Tailless Unit Protection Cubical Panel 500 A, 650 V For 250 Kva Dt 41 Providing & Installation Aluminum Crimping Lug 50 Sqmm 42 Providing & Installation Pg Clamp Weasel To Weasel. 43 Providing And Fixing Of Lt Lead 12 Sqmm 44 Providing & Installation Of Lt Fuse Strip 400 Kva T/F 3Mm 45 Piercing Clamp 46 Plinth For Size 2X2X1.5M 47 Providing And Fixing Earting Of 100 Kva Tf 48 Dismantling And Received Back Of The Scrap Material From Site To Esc Chandausi With Loading & Unloading At Both Ends Respectively (As Per Resspo Norms)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
11.
Coal and Mines #11250443 AOC
Tender for (A) Repairing And Rewinding Of 20 Hp, 550V, 1450 Rpm Kirloskar Make Squirrel Cage Induction Motor Job No. 1190, (B) Repairing And Rewinding Of 20 Hp, 550V, 1440Rpm Crompton Greaves Make Squirrel Cage Induction Motor Job No. 1191 And (C) Repairing And Rewinding Of 20 Hp, 550V, 1440Rpm Kirloskar Make Squirrel Cage Induction Motor Job No. 1192 At Water Treatment Plant, Area Workshop. , Dismantaling & Cleaning Of Burnt Motor , Decarbonization & Cleaning Of Core Slots Of Motor Starter , supply erection Copper Wire Of Required Guage , Insulatimg Materials.@20% Of The Cost Of Copper Wire , Wooden Frame For Coil Making , Cost Of Fiber Wages, Glass Lead, Socket Etc. , Cost Of Formation Of New Coils & Rewinding Of The Motor Starter , Both Side Motor Cover, Bearing Housing Worn-Out Protin Repairing By Rebuilding And Machining In St Bearing Size , De & Nde Bearing (Provided By Company) Fitting , Missing Bolt, Nuts Supply And Painting Of The Motor With Painting Materials , Heating Assembling And Testing Of The Motor , Transporting On Both Side , O/H And miscellaneous Supervision Charge , Less: Deduction Of Copper Scrap Value , D) Repairing/ Rewinding Of 60 Hp, 550V, 1480Rpm Crompton Greaves Make Squirrel Cage Induction Motor Job No. 1106 At Water Treatment Plant, Area Workshop , Dismantling Of The Burnt Motor By Un-Mounting Bolts-Nuts, Covers, Rotor Bearing Housing Etc. Taken Out And Cleaning Of The Same. , De-Carbonization And Cleaning Of Core Slots Of Motor Stator After Removal Of Burnt Coils. , Cost Of Wooden Frame For Coil Making , Cost Of supply erection Copper Wire Of Required Gaug , Cost Of Insulating Materials @20% Of The Cost Of Wire , Cost Of Glass Lead, Lugs, Sockets, Fiber Wedges Etc. , Cost Of Formation Of Coil & Complete Rewinding Of Motor Stator , Mechanical Job Like Worn-Out, Dalla Cover, Rotor Strip Welding & Machining In Std. Size , Work-Out Bearing Portion Of Rotter Shaft Rebuilding /Machining In Std/. Bearing Size And Fitting New D & Nde Bearing Wi
Contract Date: Jun 09, 2026 Contract Value : ₹ 1.92 Lakh
Boards / Undertakings / PSU No of Bidders 3
West Bengal View Result →
12.
Defence #11200251 Technical Bid
Tender For Provision Of Certain Sanctioned Works Under Ge South Bathinda At Bathinda Mil Stn.- 1 Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out And Getting Out In Soft / Loose Soil Complete All As Specified & Directed. 2 Removing Excavated Material Exc 1.50 Km N Exc. 5 Km And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Complete All As Specified And As Directed. 3 Excavation In Trenches Not Exceeding 1.5 Meter Wide And Not Exceeding 1.5 Meter Depth For Foundation Etc Or For Shafts , Wells, Cesspits, Manholes , Septic Tank, For Laying Of Cables , Laying Of Pipes Not Exceeding 10 Sqm On Plan And Not Exc 1.5 Meter Depth And Getting Out In Soft/Loose Soil Etc Complete All As Specified And As Directed By Engineer-In- Charge. 4 Material And Labour For Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 5 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 6 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 7 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Beams, Cantilevers, Bressummers, Lintels Over 1.5 M Span And The Like Etc Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 8 Material And Labour For Rcc M-25 (Design Mix) Using 20Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors,Roofs, Landings, Balconies,Canopies, Deck Slabs And In Shelves And The Like Complete All As Specified And As Directed By Engineer-In-Charge.Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 9 Material And Labour For Formwork Of Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 10 Material And Labour For Formwork In Square,Reactangular Or Polygonal On Rough Finished Surface Of Concrete To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And As Directed By Engineer-In-Charge. 11 Material And Labour For Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 12 Material And Labour For Formwork To Soffits Of Suspended Slabs Such As Roof Slab, Floor Slabs, Landings And Similar Work Not Exceeding 200 Mm Thick (Horizontal Or Sloping) On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 13 Material And Labour For Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors,Window Cills, Concrete Rail Ings, Openings In Concrete Walls, Floor And Roofs Not Exceeding 20Cm Wide And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exceeding 10 Cm But Not Exceeding 20Cm Wide On Rough Finished Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 14 Material And Labour For Mild Steel Tmt Bars 10Mm Dia And Over Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 15 Material And Labour For Mild Steel Tmt Bars 6Mm To 8Mm Dia Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 16 Demolition Of Brick Work Or Stone / Boulder Masonry, Built In Cement Mortar Or Cement Lime Mortar Including All Quoins, Arches, Pillars, Etc, In Any Description Complete All As Specified And As Directed By Engineer-In-Charge. 17 Material And Labour For Brick Work With Sub Class ‘B’ Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 18 Material And Labour For Brick Work With Fly Ash Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 19 Material And Labour Brick Work With Sub Class ‘B’ Old Size Burnt Clay Bricks Straight Or Curved On Plan Exceeding 6 Metre Mean Radius Built In Cement Mortar 1:6, Complete All As Specified And As Directed By Engineer-In-Charge . 20 Material And Labour For Brick Work With Fly Ash Old Size Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Walls Built In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In-Charge. 21 Demolition Of Cement Concrete (Unreinforced) In Ground Floor And Paving Not Exceeding 15Cm Thickness Below Or Above Ground Level Of Any Description And In Any Position Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge 22 Material & Labour For Cement Concrete 1:3:6 Type C-2 Using 40 Mm Graded Stone Aggregate For Foundations, Fillings & Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 23 Material And Labour For Cement Concrete (1:5:10), Type E-2 Using 40 Mm Graded Stone Aggregate As In Filling Of Sunken Floors Complete All As Specified And As Directed By Engineer-In-Charge. 24 Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided Complete All As Specified And Directed. 25 Material And Labour For Waterproofing Treatment To Sunken Floor Using Acrylic Based Multipurpose Polymer. The Treatment Shall Be Carried Out As Per Manufactures Specification. The Treatment Shall Be Include Of The Following Elements Also: 1. Surface Preparation Of Substrate By Removing All Traces Of Contaminates, Loose And Friable Particles, Cement Laitance Oils And Grease, Water Repellent Coatings Etc2. Injection Grouting Using Cementitious Grout If Required. The Payment For Injection Grouting Shall Be Made Separately Etc3. Repair To The Substrate, Filling Of Blow Holes/Voids And Surface Leveling Using Appropriate Products Specified By The Manufacture.4. All Intersections Of Horizontal And Vertical Surface Should Be Profiled With A Mortar Fillet Of Minimum 25Mm X 25Mm.5. The Moisture Content Of The Substrate Shall Be Checked Before Application Of First Coat At Water Proof Coating At The Rate Of 200 G/M2 Followed Brush Topping At 450G/M2 Per Mm. The Second Coat Shall Be Reinforced With Glass Fabric Between The First And Second Coat.6. The Treatment Shall Be Protected By Application Of Polymer Modified Cement Mortar Of Thickness 10Mm Applied At The Rate Of 50G Per Mm.7. Tech Specification : Tensile Adhesion Strength 0.5N/Sqmm (As Bonding Slurry). 26 Material And Labour For Aerated Autoclaved Concrete (Aac) Blocks Work According To Indian Standard Specification Is:2185(Part-3)-1984 And Latest Revision Built In Cement And Sand Mortar 1:6 With Aerated Autoclaved Concrete (Aac) Blocks Straight Or Curver On Plan Exceeding 6Mtr Mean Radius As In Sunken Floor Complete All As Specified And And As Directed By Engineer-In-Charge. 27 Supply Only Integral Water Proofing Compound. 28 Removing Excavated Material As In All Kind Of Soils Not Exceeding 50M And Depositing Where Directed At A Level Not Exceeding 1.5M Above The Starting Point Complete All As Specified And As Directed By Engineer-In- Charge. 29 Returning Filling In Any Type Of Soil, Including Spreading, Levelling,Watering And Well Ramming In Layer Not Exceeding 25 Cm In Each Layer, Complete All As Specified And As Directed By Engineer-In- Charge. 30 Material And Labour For Sand Filling Under Floor Or In Foundation Including Spreading Levelling, Watering And Well Ramming In Layers Not Exc 25 Cmetc Complete All As Specified And As Directed By Engineer-In- Charge. Note: Sand Shall Be Approved By Ge. 31 Material And Labour For Hard Core Using Broken Stone Aggregate Of Gauge Not Exc. 63Mm, Deposited Spread And Leveled In Layers Not Exc. 150 Mm Thick, Watered And Rammed To A True Surface Complete All As Specified And As Directed By Engineer-In- Charge. 32 Material And Labour For 75 Mm Thick Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Sub Base Of Floor. Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 33 Material And Labour For Rendering 10 Mm Thick In Cement Mortar 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Of Walls And Finishing The Surface Even & Fair Faces Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 34 Material And Labour For Rendering 5 Mm Thick In Cement Mortar In (1:3) On Ceiling And Finishing The Surface Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. 35 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 36 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Fair & Even Mixed With Liquid Water Proofing Compound As Per ManufacturerS Instructions But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. Note :- Liquid Water Proofing Compound Shall Be Measured And Paid Separately. 37 Supply And Fixing Chicken Wire Mesh ( Murga Jali ) In Cement Plaster Or Over Joints Of R.C.C And Brickwork Or As Per Site Requirement Of 24 Gauge & 12 Mm Mesh And 300 Mm Width For Construction Joints And Chasing In Brick Work For Electrical Conduits Or Water Supply Pipes And Pegs/Nails With Nailing Machine As Required Before Rendering / Plastering Etc. Complete As Per Site Requirement Complete All As Specified And As Directed By Engineer-In- Charge.Note: Rendering / Plastering Shall Be Measured And Paid Seperately Under Serial Item No. 5.00 Of ScheduleA Boq Here-In- Before. Nothing Shall Be Paid Extra On Account Of Rendering / Plastering In This Item. 38 Material And Labour For Applying Acrylic Wall Care Putty On Internal Surfaces And External Surfaces Of Walls/Ceilings/Soffits (Thickness Vary From 1.5 To 2.5 Mm As Required For Desired Smoothness And Leveling Of Surfaces In Two Or More Layers) By Using Ready Made Acrylic Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc Complete All As Specified And Directed By Engineer-In- Charge.Make Of Acrylic Wall Care Putty : As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After.Notes : (I) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. (Ii)The Make Of Acrylic Wall Care Putty Shall Be As Per The Recommendation Of Manufacturer Of Paint. 39 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 40 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying 01 Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Existing Shade @ 10 Sqm/Litre/1 Coat By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits ( Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc, Over Including A Coat Of Exterior Wall Primer @ 10 Sqm/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Including Removing The Vegetation Of Any Type And Description The Making The Surface Good Complete All As Specified And Directed. 41 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 42 M&L For Preparing Existing Treated Surfaces Of Ceiling Including Cornices And Applying Two Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And As Directed By Engineer-In-Charge. 43 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 44 Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Interior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Including A Coat Of Exterior Wall Primer @ 11 Sq.M/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed. 45 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 46 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying One Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Approved Shade @ 5 Sqm/Litre/2 Coats By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer @ 11 Sqm/Litre/1 Coat Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits (Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed.Note For Item No 5 To 8 :- (A) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. 47 Material And Labour For For Preparing New Plastered Surfaces Of Ceilings And Applying Three Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The Last Two Coats Of White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And Directed By Engineer-In- Charge. 48 Material And Labour For Applying Three Coats Of White Wash On Newly Plastered Or Unplastered Ceiling Surfaces Including Preparation Of Surfaces, Complete All As Specified And Directed 49 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exc 1.5 Sqm Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 50 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4 Sqm Each Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 51 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat Of Size 45Mm X 70 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 52 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat With Double Rebate Of Size 65Mm X 125 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 53 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 54 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Decorative Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 55 Supply & Fixing Factory Made 30Mm Thick Solid Wpc ( Wood Polymer Composite ) Wiremesh Door Shutter Of Required Size Comprising Of Virgin Pvc Resin Of K Value 57-60 ( Suspension Rade ), Calcium Carbonate And Natural Fibers ( Wood Powders/ Rice Husk/ Wheat Husk ) And Non Toxic Additives, Made From Extrusion Process Wpc Foam Sheet Single Extruded ( Inner ) With Having Minimum Density Not Less Than 650 Kg/Cum , Having Good Screw Holding Capacity ( Screw Withdrawal Strength Of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Of 50 N/Mm2, Modulus Of Elasticity 850N/Mm2 And Resistance Of Spread Of Flame Of Class A Category With Property Of Being Termite/ Borer Free.Water/ Moisture Proof And Fire Retardant. Pvc Foil Of Minimum 14 Microns Thick Of Approved Design Pasted On Both Faces Of Shutter For Fixing Mosquito Mesh And Xtn Aluminium Mesh Together On Panel Area Of Door Except Stiles And Rails To Be Panelled With And Including Mesh With Self Tapping Round Headed Scresws At Required Distance, Screws And Edges Covered With Feathered Pvc Edge Beading All Around Of Mesh And Fixing Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws With And Including 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01 No. Of Helical Door Spring Of 300 Mm Length Complete All As Specified And As Directed By Engineer-In-Charge. Note: 1. Material Test Certificate Of All The Items And Authentication Should Be Compulsory Provided By The Manufacturing Company 2. The Rate Of 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01No. Of Helical Door Spring Of 300 Mm Length Is Inclusive In This Item And Nothing Shall Be Paid Extra On This Item..3. The Rate Of Mosquito Mesh And Xtn Aluminium Mesh Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 56 Supply And Fixing Factory Made Upvc White Colour Casement (Openable) Window (Area Exceeding 1.00 Sqm But Not Exceeding 2.00 Sqm Each) Made Of Extruded Profiles With Wall Thickness Of 2.3Mm ( + – 0.2Mm). Window Profile With Hollow Section With Multi Chamber, Frame (60Mm X 58Mm), Sash (60Mm X 73Mm), T Profile (One Vertical Length In Between Two Shutters) (60Mm X 74Mm), Glazing Bead (35Mm X 20Mm) Will Be Mitered Cut And Fusion Welded At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc., Making Arrangement For Fixing Of Hardware. Epdm Gasket 1.2 +– 0.2Mm Thick, Galvanized Steel Frame (28Mm X 21.5Mm), Sash (31Mm X 27.5Mm). T Profile (27Mm X 17Mm) To Be Inserted In Required Profile, Frame Will Be Fixed To The Wall With 8 Mm X 100Mm Long Fasteners. Hardware: [Casement Handle Made Of Zinc Alloyed (White Powder Coated), But Hinges OfZinc Alloyed (White Powder Coated), Transmission Gear Made Of Mild Steel With Multi Point Locking System] And 5Mm Thick Glazing With Selected Quality Glass.(Note: The Unit Rate Quoted By Contractor Excludes Cost Of Glass And Includes All Other Connected Accessories. Net Opening Will Be Measured For Payment Purpose.) 57 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-1 Using 20 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 58 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-2 Using 40 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 59 Demolition And Breaking Up Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete)Of Any Dia Set In Cement Laid In Trenches Incl All Fittings & Accessorises Complete All As Specified And As Directed By Engineer-In- Charge. 60 Supply & Fixing For 4 Mm Thick, Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square Not Exceeding 0.5 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 61 Supply & Fixing 4.0 Mm Thick Figured Glass Pin Head Type And Glazing With Oil Putty In Square N.Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed 62 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Not Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 63 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 64 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles, Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accourdingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (V)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill . 65 Supply & Fixing Stainless Steel Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Stainless Steel Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 66 Supply & Fixing Galvanised Ms Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Galvanised Ms Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 67 Material And Labour For Providing And Laying Premium (1St Quality) Straight Edge,Stain Free, Glooss Finish, Square Marbonite Double Charged Vitrified Tiles Size In 600Mm X 600Mm X 9Mm To 10Mm Thick As In Floors Etc. Shade As Approved By Ge , Set And Jointed With Using Spacer And Approved High Polymer Modified, Grey Cement-Based Tile Adhesive Suitable For Fixing Medium Format Tile/Stone In Walls/Floor Conforms To Is 15477 : 2019 Type 2T “Adhesives For Use With Ceramic, Mosaic And Stone Tiles” Conforms To En 12004: 2017 And Is A Normal Cementitious Adhesives (C1) With Slip Resistance (T) Of Class C1 And Necessary Grouting As Per Manufacturer’S Instruction, Completed All As Specified And Directed By Engineer-In-Charge. 68 Supply And Fixing Anodised Aluminium Snap Grid Frame Work For False Ceiling 605Mm X 605 Mm Etc Complete All As Specified And As Directed By Engineer-In-Charge. 69 Supply And Fixing False Ceiling At All Heights With Grg (Glass Fibre With Reinforced Gypsum) False Ceiling Tiles Of Size 595 X 595 Mm Of Approved Tecture Design And Patterns Having Moisture Content Less Than 2% Humidity Resistance Of 99%, Nrc 0.50 To 0.75 As Per Is 8225:1987, Noncombustible As Per Bs 476 (Part 4)- 1970 And Light Reflectance Of 85%D (Minimum) To Be Laid In True Horizontal Level Suspended On Inter Locking Metal T-Grid Of Hot Dipped Galvanisezed Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 15 X 32 Mm Of Length 3000 Mm, Cross-T Of Size 15 X 32Mm Of Length 1200Mm And Secondary Intermediate Cross T Of Size 15 X 32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L Shape Level Adjuster Of Size 85 X 25 X 2Mm. Galvanized Iron Perimeter Wall Angle Of Size 24 X 24 X 0.40Mm Of Length 3000 Mm To Be Fixed On Periphery Wall I Partition With Help Of Plastic Rawl Plugs At 450 Tiles Fully Center To Center And 40Mm Long Dry Wall Wodd Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge. 70 Material And Labour Anodised Aluminium Frame For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Omplete All As Specified And As Directed By Engineer-In-Charge. 71 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accordingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Powder Coated Butt Hinges, Aluminium Handles, Aluminium Tower Bolts & Aluminium Peg Stays Shall Be Measured And Paid Seperately Under Respective Itmes Of ScheduleA Boq.(V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (Vi)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill 72 Material And Labour Anodised Aluminium Grill (Anodised Transparent Of Dyed To Required Shade According To Is: 1868 With Minimum Anodic Coating Of Grade Ac 15) Of Approved Design/Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass/Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Opening, All Complete As Per Requirement And Direction Of Engineer-In-Charge. 73 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 15Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 74 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 20Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 75 Supply And Fixing 16 Mm Bore Cpvc Pipe Sdr 11 With And Including Cpvc Sdr 11 Fittings And Fixed To Walls & Ceilings Or Laid In Floors, Complete Complete All As Specified And As Directed By Engineer-In-Charge 76 Supply And Fixing 20 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 77 Supply And Fixing 25 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 78 Material And Labour For Cutting Chases In Brick Wall , Pinning In. Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 Or Pcc 1:2:4 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Exc 10 Cm But Not Exc 20 Cm Girth Complete All As Specified And As Directed By Engineer-In- Charge.. 79 Supply And Fixing In Repair Brass Chromium Plated Wall Mixer For Mixing Hot & Cold Water Screwed Down, Screwed For 15Mm Bore Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 80 Supply And Fixing In Repair Bib Taps Cost Copper Alloy With Crutch Or Butterfly Handle , Screwed Down , Chromium Plated Screwed For Iron Pipe Or Brass Ferrul For 15Mm Bore Dia Pipe Complete All As Specified And Director. 81 Supply And Fixing In Reapir 15Mm Bore Bib Tap, Long Body, Fancy Type, Chromium Plated, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 82 Supply And Fixing In Repair 15Mm Bore Stop Valves, Fancy Type, Chromium Plated With Long Shank And Cup (Concealed Type) Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed For Iron Pipe Or For Brass Ferrule Complete All As Specified & Directed By Engineer-In-Charge. 83 Supply And Fixing In Repair Angular Stop Cock With Wall Flange, Fency Type Chromium Plated Cast Copper Alloy Screwed Down, High Pressure, Screwed One Ends For 15Mm Bore Of Iron Pipe Or For Union And Fixed In Position Complete All As Specified & Directed By Engineer-In-Charge. 84 Supply And Fixing In Repair Vitreous China Wash Hand Basin, White, Flat Back, Size 450Mm X 300 Mm Including Cast Iron Cantilever Bracket With And Including 32 Mm Dia Brass Waste Coupling And With And Including Fixing Of Waste Fitting And Union Complete All As Specified And As Directed By Engineer-In-Charge. 85 Supply And Fixing In Repair Ptmt Mirror Cabinet Of Size 380Mm X 450Mm Best Quality Confirming Ot Sample Kept In GeS Office Complete All As Specified And Directed By Engineer-In-Charge. 86 Supply And Fixing In Replacement Sink With Drainage Board Made Of Stainless Steel 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X460Mm Bowl Size 410Mm X330Mm X160Mm Complete All As Specified And As Directed By Engineer-In-Charge. 87 Supply & Fixing In Replacement Brass Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe And Fixed For Iron Pipe 15Mm Bore Complete All As Specified And As Directed By Engineer-In-Charge. 88 Supply And Fixing In Repair Stainless Steel Plate Rack Of Size 900Mm X 600Mm X 250Mm And Thickness Of Stainless Steel Strip Of 1Mm Fixed On Wall Etc. Complete All As Specified And Directed . 89 Material And Labour For Cutting Holes In Brick Walls Built In Cement Mortar (Not Exceeding Half Brick) For Inserting Hold Fast And Making Good Dismantled Portion In Cm 1:3 Or Cement Concrete 1 : 2 : 4 , Type B1 As Required , Depth Of Embedded Portion Exceeding Half Brick Walls And Not Exceeding One Brick Of Hold Fast Or Lugs Measured From The Face Of The Jamb Into Walls Complete All As Specified And As Directed By Engineer-In- Charge. 90 Material And Labour For In Repair Vitreous China Wash Down Water Closet Pan Wall Hanging Single Piece (With And Including Flushing Cistern Ewc) P Trap, With And Including White Coloured Closed Pattern Plastic Seat Cover, Hand Faucet , With And Including Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And As Directed By Engineer-In- Charge. 91 S & F In Repairs Cp Stainless Steel Grating (With Or Without Waste Hole), 125Mm Size, Fixed On Floor/Nahani Gully Trap Traps Etc Complete All As Specified And Directed. 92 S&F In Repair 25Mm Dia And 1Mm Thick Stainless Steel Drapery Rod Including With Bracket / Wall And Other Side Fancy Knobs At Both Ends As Approved By Engineer-In-Charge/Ge Including Taking Down Old Existing Rod/Pelmet With Accessories Complete All As Specified. 93 Supply And Fixing Cp Brass Fancy Type Corner Glass Shelf (25Cm/30Cm ) With Cp Brass Bracket & Railing Etc. Complete All As Specified And As Directed By Engineer-In- Charge. 94 Supply And Fixing In Repair Stainless Steel, Chromium Plated, Decorative Type, Soap Dish Holder Of Approximate Size 160Mm X 160Mm X 90 Mm Fixed To Wall With Rubber Plugs Complete All As Specified And As Directed By Engineer-In-Charge. 95 Supply & Fixing In Replacement Brass Chromium Plated Tubular Towel Rail 20Mm Dia D Type, 600Mm Long Between Flanges Fixed To Plug , Bracket With Chromium Plated Brass Screws Complete All As Specified And Directed By Engineer-In-Charge. 96 Supply And Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Pipes Single Socket 6 Kg/Sq Cm In Any Length With Stack Clamps Made Out Of 50Mm By 5 Mm Flat Iron And 16Mm Dia Round Iron Stays, Including Bolts And Nuts And Securing Ends Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge. Including Taking Down Old Ac Eaves Gutters And Rainwater Pipes ( Of Any Size And Pattern), Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 97 Supply & Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Ring Fit Pipes Single Socket In Any Length With Stack Clamps As Shown In Btd Drg No. 916 Sheet 1/4 To 4/4 And Btd-917 Sheet Sheet 1/1 Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge Including Taking Down Old Ac Eaves Gutters And Rain Water Pipes ( Of Any Size And Pattern) Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 98 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 100 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 99 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 75 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 100 Supply And Fixing 110 Mm Bore, Pvc (Swr) Fittings Type -B Such As Bends, Tee, Shoe Etc; Fixed To Pvc Pipes, Compete All As Specified And As Directed By Engineer - In-Charge. 101 Supply & Fixing 110Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Complete All As Specified And As Directed By Engineer-In- Charge. 102 S&F 110 Mm Bore Of Pvc (Swr) Bends And Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 103 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Single Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 104 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Double Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 105 S&F 75 Mm Bore Of Pvc (Swr) Bends & Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 106 S&F In Repairs Pvc (Swr) Gully Trap Of Size 150 X 150 Mm, Square Or Round Mouthed, Type P Setting And Jointing With Solvent Cement Complete All As Specified And Directed. 107 Supply And Fixing In Repair Pvc (Swr) Type -B Floor Trap Any Type (Q, S, P), 110/75Mm Dia With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Stone Aggregate Complete All As Specified And Directed By Engineer-In- Charge. 108 Supply And Fixing In Replacement 10 Litres Capacity Pvc Valveless Syphonic Action Type Low Level Flushing Cistern White With Inlet, Ball Valve, Float, Handle Including Brackets And 32Mm Dia Pvc Flush Pipe Complete All As Specified And Directed By Engineer-In-Charge. 109 S&F In Repair Vitreous China Wash Basin, White, Oval Type , Size 450 Mm X 300 Mm Fixed On And Including Cast Iron Cantilever Bracket, 32 Mm Dia Brass Waste Coupling And Including Fixing Of Tap, Waste Fitting And Union Complete All As Specified And Directed. 110 Supply & Fixing In Repair Chromium Plated Square Shower Rose 200Mm X 200Mm Size, With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union For 15Mm Bore Of Pipe Complete All As Specified And As Directed By Engineer-In-Charge. 111 Supply & Fixing In Repair Pvc Connections 15Mm Size With Brass Nuts Of Length 450Mm Complete All As Specified And As Directed By Engineer-In-Charge. 112 Supply & Fixing In Repair Pvc Waste Pipe With Socket Suitable For Connection To Waste Fittings Of 32/40Mm Dia, And Of Length Minimum 75 Cm Complete All As Specified And As Directed By Engineer-In-Charge. 113 Supply And Fixing In Replacement Three Layers 500 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 114 Supply And Fixing In Replacement Three Layers 1000 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 115 Supply And Fixing In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Of Size 20 Mm Bore (Minimum Weight 20Mm-210 Gram) Complete All As Specified And As Directed By Engineer-In- Charge. 116 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 20Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 117 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 25Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 118 Supply And Fixing In Replacement Bevelled Edge Mirror Selected Quality 5Mm Thick Glass Mounted And Fixed To With Chromium Plated Brass Screws And Cup Washers, With And Including Pvc Frame Around Made Of Pvc Channel, Complete All As Specified And Directed By Engineer-In-Charge. 119 Supply And Fixing In Repairs Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And As Directed By Engineer-In- Charge. 120 Roughening Surfaces Of Old Concrete Floor By Picking, Sweeping Clean And Washing Down With Water To Remove Dust, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 121 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Permises Etc. Complete All As Specified And Directed By Engineer-In-Charge. 122 M&L For Pcc (1:2:4) Type B-1, Using 20 Mm Graded Stone Aggregate As In Floor Surface Finished Fair 30 Mm Thick Below Tiles Complete All As Specified And Directed. . 123 M & L Non-Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over & Including 15Mm Thick Screed In Cm 1:6 Complete All As Specified And Directed. 124 Material And Labour 25Mm Thick Cement Concrete Type B-1, 1:2:4 (12.5 Mm Graded Stone Aggregate) As Floors, Sub-Floors Etc And Finishing Surfaces Of Concrete Topping As Even & Fair Or Even & Rough To Receive The Topping Layer Complete All As Specified And Directed By Engineer-In-Charge. 125 Material And Labour For Double Charge Vitrified Ceramic Tiles ,Stain Free, Having Size Not Less Than 600X300Mm And 8 Mm Thick, Premium (1St Quality) Straight Edge, Colour As Approved By Ge , As In Vertical Surfaces Such As Skirting , Set And Jointed In Neat Cement Slurry And Laid Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In- Charge. 126 Material And Labour Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Pillars,Win Dow-Cills, Cooking Platforms And Like In Laid Over And Including 15 Mm Thick Screed In Cement Mortar (1:4) And Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Marble Shade And Roundening To The Edge Of Stone Slabs On Edges Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 127 Dismantling Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc Laid Dry Or Bedded And Pointed In Any Mortar Complete All As Specified And As Directed By Engineer-In-Charge. 128 Demolition Of Cement Concrete Reinforced Of Any Discription And In Any Position, Including Reinforcement Cut As Required To Facilitate And Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge. Note:The Weight Of Scrap Iron For Schedule Of Credit Shall Be Ascertain By Boo As Ordered By Ge.The Copy Of Boo Duly Countersinged By Ge Shall Be Enclosed With Final Bill. 129 Material And Labour For Reinforced Cement Concrete, Nominal Mix,1:2:4, Type-B1, Using 20 Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Including Proper Compaction By Using Mechanical Viberator Complete All As Specified And Directed. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 130 Supply And Fixing Pvc (Hdpe) Swr, 110 Mm Bore, Single Socketed In Any Length With Rubber Ring Joints Using Solvent As Per Manufacture Instruction, Fixed To Walls Complete All As Specified Including Fixing Of Pipe To Wall With Flat Irons Clamps Of Size 25 X 3 Mm, Bolts, Washers, Nuts, Nails Etc, After Taking Down Existing Damaged Rain Water Pipe Complete All As Specified And Directed 131 Material & Labour For In Repair 75 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 132 Material & Labour For 100 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 133 Material And Labour For Water Proofing Tratment To Roof / Terrace (Material Of Water Proof Treatment As Approved By Ge) Single Component, Acrylic Based, Flexible, Micro Fibre Reinforced Waterproofing And Heat Reflective Coating System. The Treatment Shall Be Carried Out As Per The Manufacturers Instructions And Shall Include The Followings:(A) Preparation Of Substrate And Cleaning It Off All Loose And Triable By Mechanical Means(B) Open The Cracks Lines To Form , V Grooves With Cutter/Hammer/Chisel Up To 5-10Mm And Filling With Crack Filler And Pu Sealant.(C) Application Of Primer Coat @ 0.2 To 0.3 Kg/ Sqm Followed By The First Coat @ 0.75Kg/ Sqm.(D) The Second Coat Shall Be Applied @ 0.75 Kg / Sqm And Reinforced With Fabric Re-Inforcement Between The First And Second Coat.(E) The Top Coat Of Primer Shall Be Applied After The Second Coat Dries Off @ 0.05-0.08 Kg Per Sqm.(F) The Material Shall Adhere To Following Specification. Technical Specification Of Materialtensile Strength 1.5 Mpa Astm D412Elongation At Break > 200% Astm D412Adhesion In Peel > 1.5 Mpa (On Concrete Substrate) En 1542Crack Bridging Ability Passes Upto 3.2Mm Width Astm C1305Permeability To Water Vapour Passes Is 2645Water Vapour Transimission ~ 23 G/M²/24Hr Astm E96Water Absorption 134 Material And Labour For 40Mm Average Thick Pcc Padding In 1:2:4 Type B-1 (Using 20Mm Graded Stone Aggregates) As In Roof Slab Finishing The Surface Even And Fair Using Liquid Water Proofing Compound Complete All As Specified And Directed. Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 135 Material And Labour For Making Benching With Pcc 1:2:4 Type- B0, Using 12.5Mm Graded Stone Aggregates Using With Liquid Water Proof Compound As Per ManufacturerS Instruction Along Side Wall Adjoining To Roof In Concave Shape Complete All As Specified And Directed. Note : Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 136 Material And Labour For Cement Concrete 1:2:4 , Type B-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 137 Material And Labour For Water Proofing Compound Complete All As Specified And Directed. 138 Supply And Laying Dwcpe (Sn 8) Drain Pipes 150 Mm Nominal Dia As Per Is-16098 (Part-Ii), Laid In Trenches On Bed Including All Accessories/ Fittings/ Jointed Ring, Jointing And Testing Complete All As Specified And As Directed By Engineer-In- Charge.Note:- Excavation , Earth Work, Bedding And Pedestal / Anchorage If Required Shall Be Measured And Paid Separately Under Appropriate Item Of Boq/ Sch A 139 Material And Labour For Pcc (1:3:6) Type C-2 Using 40 Mm Graded Stone Aggregates As In Concrete Bed Of Sgsw Drain Pipes Of 150 Mm Bore, Laid To Required Slope Including Packing Under And Haunching Against The Sides Of Pipes After They Are Laid And Tested Complete All As Specified And As Directed By Engineer-In-Charge. Note :- (I) Thickness Of Concrete Bed Below The Barrel Of Pipe Shall Be 10 Cm. (Ii) Width Of Concrete Bed Shall Be Outer Diameter Of Drain Pipes (Not Of Sockets / Collar) Plus 30Cm. 140 Material & Labour For Antitermite Treatment Along The External Wall Below Concrete Or Masonry Apron Using Chemical Emulsion @ 2.25 Litres Per Linear Metre Including Drilling And Plugging Holes Etc. In Apron/Plinth Etc., Complete All As Specified And As Directed By The Engineer-In-Charge. 141 Material And Labour For Att At Points Of Contact Of Wood Work By Chemical Emulsion (In Oil Or Kerosene Based Solution) @ 0.5 Litre/Hole By Drilling 6Mm Dia Holes At A Downward Angle Of 45 Degree At 150Mm Centre To Centre And Sealing The Same Complete All Sepecified And Directed By Engineer-In-Charge. 142 Material And Labour For Att Of Soil Under Existing Floors Using Emulsion @ One Liter Per Hole, 300Mm Apart Including Drilling And Plugging 12Mm Dia Holes With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To Match The Existing Floors Complete All Sepecified And Directed By Engineer-In-Charge. 143 Material And Labour For Writing Letters Or Figures (Block,Roman, Italic Ot Indian) Of Any Description, Not Exceeding 30Cm High With Paint Complete All Sepecified And Directed By Engineer-In-Charge. 144 Material And Labour For Cutting Into Existing Manholes For Connecting New Drains, Making Good To Pipe And Rendering, Cutting Out Existing Benching For And Forming Branch Channel (1/2 Round Or 3/4 Section) In Cement Concrete 1:2:4 Type B-L Smooth Finished, And Reforming Benching As Required For Internal Dia Of Pipe In 150 Mm Complete All As Specified And As Directed By Engineer-In-Charge. 145 Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 146 Material And Labour For 15Mm Thick Rendering In Cm (1:6) (Internal Surface) On Other Than Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Even & Smooth But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 147 Material And Labour For Factory Made,Machine Pressed Precast Interlocking Paver Block 60 Mm Thick With Grey Cement And No Pigment, Any Shape And Size, Conforming To Is 15658-2006, Made Out Of M-35 Grade Concrete Laid Over Sand Cushioning Complete All As Specified And As Directed By Engineer-In- Charge. Note: The R Sand Cushioning Shall Be Measured And Paid Seperately Under Appropriate Item Of Schedule A Boq. 148 Dismantling Of Brick Tiles Or Terracing Tiles Single Layer On Roof & Disposal Of Retrieved Material Upto A Distance N.Exc 100M Where Directed, Complete All As Specified And Directed By Engineer-In- Charge. 149 Demolition Of Mud In Roofs, Any Thickness, Including Plastering And Leeping (Whether Full Thickness Removed Or Only A Part Thereof Disposal Off Rubbish Upto A Distance Not Exceedomg 500.00Mtr Where Directed ) Complete All As Specified And Directed By Engineer-In- Charge. 150 Material And Labour For 15Mm Thick Screed Bed Or Bedding Layear In Cement Mortar 1:4 On Roof Surfaces, Parapet Or Vertical Beam Surface (Horizontal Or Vertical) Finishing The Surfaces Even And Fair Complete All As Specified And Directed By Engineer-In-Charge. 151 Supply And Fixing Anodised Aluminium Handle, Fabricated Type 150Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 152 Supply And Fixing Aluminium Anodised Barrel Tower Bolt Of Extruded Section, 200Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 153 Supply & Fixing Aluminium Anodised Sliding Door Bolts 300Mm Long, With Hasp And Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Complete All As Specified & Directed By Engineer-In- Charge. 154 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer Without Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 155 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer With Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 156 Supply Only 3.00 Mm Thick Sheet Glass Ordinary Quality ,Fixing With Oil Putty To Wooden Or Steel Surface N.Exc 0.5 Sqm Each Complete All As Specified And Directed 157 Material & Labour For Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm, In Soft / Loose Soil Complete All As Specified And Directed By Engineer-In- Charge. Complete All As Specified And Directed By Engr-In-Charge. 158 Supply And Fixing For Mild Steel Screw Bolts 5Mm To 10Mm Dia Of Neck (Machine Made) With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut, Length Of Bolt Exc 5Cm But N Exc 10Cm Long Complete All As Specified And Directed By Engr-In-Charge. 159 Supply And Fixing For Pre -Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thickness Of Any Colour Having Atensile Strength Of 550 Mpa As In Roof Covering Fixed With L Type Or J Type Or Cranked Hook Bolts All As Specified And Directed By Engineer-In-Charge. 160 Material And Labour For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Complete All As Specified And Directed By Engr-In-Charge. 161 Material And Labour For Steel Work In Tubular Post 100Mm Dia Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161- 1979 Grade St.-240 Including Rolled Mild Steel Joist, Channel, Angle, Or Tee Sections, Fixed Independently, Without Connecting Plates, Etc. (Cut To Ordinary Lengths I.E. Within 20Mm Of The Length Indicated Of Gde Fe 410 -S, Complete All As Specified And Directed By Engr-In-Charge. 162 Supply And Fixing In Repairs Magic Eye For Flush/Panelled Door Shutter Etc Complete All As Specified And As Directed By Engineer-In-Charge. 163 Supply And Fixing Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) Andhanging; Also Fastening And Fixing Complete Complete All As Specified And Directed By Engineer-In -Charge. 164 Material And Labour For Preparation Of New Steel Surfaces Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over With And Including One Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified And As Directed By Engineer-In-Charge. 165 Material And Labour For Preparing Old Steel Surfaces Of Any Description Over 10 Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And As Directed By Engineer-In- Charge. 166 Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And As Directed By Engineer-In- Charge. 167 Supply & Fixing 18Mm Thick Hdhmr Board Uv Coating, Exterior Grade As Approved By Ge, With And Including Acrylic High Gloss Sheet Of Min 1Mm Thick Over Hdhmr Board, Anti Fungal, Moisture Resistance, Anti Borer, As Per Is 14587 For Frame And Shutter For Kitchen Cabinets / Cupboards (Such As Side Wall, Shutter, Partition Back Side Of Etc. Of Cupboard And Cabinets). Complete All As Specified And Directed By Engg-In-Charge. 168 Supply & Fixing In Repairs Of Stainless Steel Cabinet / Drawers Handle Having A Length Of 250Mm And Shape Complete All As Specified And Directed. 169 Supply & Fixing In Repairs Of Partial Overlay / Fully Overlay Hydraulic Self Closing Concealed Hinges Having Size 103Mm X 64Mm Finish Of Nickel/Silver As Approved By Ge Complete All As Specified And Directed By Engg-In-Charge. 170 M&L For 40Mm Gi Pipe Medium Grade Made To Shape As In Spout Pipe As In Sunken /Verandah/ Balconey Complete All As Specified And As Directed. 171 Supply And Laying Or Fixing Or Laid In Trenches/ Ducts/ Through Pipes/ In Floors / Under Roads/ Hard Standing /Along Poles And Testing Lt Cable Xlpe, Pvc Insulated Screened, Bedded, Galvanised Steel Strip Or Wire Armourd Cable (Heavy Duty) 1100 Volt Grade With Aluminium Conductor Having Cross Sectional Area 70 Sqmm X 3.50 Core Conforming To Is-7098 (Part-I -1988) Complete All As Specified And As Directed By Engineer-In-Charge. (Excavation And Earth Work, Sand Cushioning & Gi Pipe Shall Be Measured And Paid For Separately) 172 Taking Down Carefully Copper /Aluminium Point Wiring (Light, Fan, Socket Or Power Point ) Complete Including Fitting Such As Hylem , Sheet Switches, Ceiling Rose, Pendent Holder , Sockets, Fan Regulator , Bell Push, Electronic Bell , Sunken Box Except Concealed Conduit Etc. Complete All As Specified And Directed By Engineer-In-Charge. Notes:(I) The Weight Of Aluminium Scrap , Copper Scrap And Iron Scrap Shall Be Ascertained By Boo As Ordered By Ge And Same Duly Countersinged By Ge Shall Be Enclosed With Final Bill. (Ii) The Rate Of Cutting Chases (As Required) And Making Good Surfaces To Match With Adjoining Surface Shall Be Measured And Paid Seperately Under Serial Item No. 173.00, 174.00, 175.00, 176.00, 177.00, 178.00, 179.00, 180.00, 181.00, 182.00, 183.00, & 184.00 Of Boq. 173 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps One Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 174 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps Two Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 175 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Same Board Complete All As Specified And As Directed By Engineer-In- Charge. 176 All As Per Item No 17400 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 177 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 5/15 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 178 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Bell/Buzzer Point Controlled By One Push Button On Independent Board But Not Below The Switch Board, Complete All As Specified And Directed By Engineer-In-Charge. 179 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Socket Outlet 3 Pin 6 Amp On Independent Board Complete All As Specified And Directed By Engineer-In-Charge. 180 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For 15/16 Amp Socket Out Let By Using 2.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 181 Material And Labour For Point Wiring For One Light / Fan Point Controlled By One Switch With 1.5 Sqmm (Nominal Area) Pvc Insulated Unshealthed Multi Stranded Copper Conductor Cable Fr-Lsh In Existing Conduit And Provision Sunken Boxes But Inclyding 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point Controlled By One Switch And Fan Regulator Including Pvc Insulated Unshealthed 1.5 Sqmm Copper Conductor Cable Fr-Lsh Connected To Common Earth Dolly Complete All As Specified And Directed 182 All As Per Srl Item No 181.00 (Here-In-Before) But Socket 3 Pin 5 Amp 230 Volt Flush Type On Same Board 183 All As Per Srl Item No 181.00 (Here-In-Before) But For One Socket Point Outlet 3 Pin 5 Amp In Incdependent Board 184 All As Per Serial Item No 181.00 Of Boq Here-In-Before But For 15 Amp Socket Out Let By Using 1.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 185 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 5 Amp Complete All As Specified 186 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 15 Amp Complete All As Specified 187 Supply And Fixing Socket Outlet 3 Pin, 5 Amp Flush Type All As Specified 188 Supply And Fixing 2 In 1, 3 Pin, 5 And 15 Amp Flush Type Complete All As Specified 189 Supply And Fixing Modular Switch One Way , 6Amp/10Amp ,1 Module, Single Pole, 250 Volts ,Ac Supply, Isi Marked , Complete All As Specified And Directed By Engineer-In-Charge 190 Supply And Fixing Modular Socket Outlet , 6 Amp-2/3 Pin Combined 2 Module , 230 Volts , Multipurpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 191 Supply And Fixing Modular Switch One Way 16 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 192 Supply And Fixing Modular Switch Two Way 6 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 193 Supply And Fixing Modular Bell Push Switch 6A 1 Module , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge.Note: (I) Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 194 Supply And Fixing Modular Socket Outlet 6Amp/16Amp-2/3 Pin Combined,2 Module ,230 Volts ,Multi Purpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 195 Supply And Fixing Fan Regulator, Modular Type, 5 Step, High Speed, Two Module Complete All As Specified And Directed By Engineer-In-Charge. 196 Supply And Fixing Ceiling Rose 3 Terminal Flush Type 6 Amp 250V ,Isi Marked ,Ac Supply, Topline Series With Polycarbonate 20Mm X 50 Mm Two To Three Terminal, Complete All As Specified And Directed By Engineer-In-Charge. 197 Supply And Fixing Electric / Electronic Bell, Ding Dong Type 230 Volt Ac Supply,Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 198 Supply And Fixing Wall Mounted Extruded Aluminium/Polycarbonate Led Batten Fixture T8(G13 Holder) 1.2 M Including One Led Retrofit Tube 20(±10) Watt. 1.2 M T8 6500 Efficacy Not Less Than 90 Lumen/Watt Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete Including Making Connection Complete All As Specified And Directed 199 Supply And Fixing Lamp Holder ,Isi Marked Of Pvc/Polycarbonate Type With Back Plate Suitable For Batten Fitting With And Including 9Watt Led Retrofit Lamp (Base B-22) Complete All As Specified And Directed By Engineer-In-Charge. 200 Supply And Fixing Lamp Holder Pvc/ Polycarbonate Type With Back Plate Suitable For Batten Fitting With Led Bulb 5 Watt Lamp Base- B-22 Complete All As Specified And As Directed By Engineer-In- Charge.Note: Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 201 Supply Only Led Bulb 9 W (Suitable For B22 Base), 250V Ac, Green/Red/ Clear Day Light ( Cdl) In Colour Complete All As Specified And Directed By Engineer-In-Charge.As Per Direction Of Engineer-In-Charge Colour Of Led Luminiure Cdl/Warm White Shall Be Provided By The Contractor As Per Site Requirment And Nothing Shall Be Paid Extra On This Account.Notes:(A) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Led Bulb Complete Including Lamp/ Strip From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led Bulb . (B) All Led Bulbs Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (C) Scope Of Work Shall Include To Fix Led Bulb Walls/Ceiling Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account.(D) Old Unservicable Retrieved Material Shall Be Deposited In The Store Yard Of Age E/M Ge (North) Bathinda By The Contractor His Own Arrangements And Nothing Shall Be Paid Extra On This Account. (E) The Rate Of Electric Connection Connecting With Using Flexible Copper Wire Twin Core Upto Ceiling Rose/Connector Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 202 Supply And Fixing In Replacement Led Panel Light Fitting Recessed Mounted,Square Shaped Of Size 600Mm X 600Mm , 36 (±10%) Watt, Efficacy Not Less Than 100 Lumen/Watt , Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete As Per ManufacturerS Instructions With And Including Connection With Flexible Twin Core Copper Cable Of Size 23/.00076 From Ceiling Rose To Fitting Complete All As Specified And As Directed By Engineer-In- Charge. 203 Material And Labour In Replacement Sub Main Wiring Complete With Two Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh With And Including Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh For Earth Wire In Existing Pvc Concealed Conduit (Colour Code Phase-Red, Neutral-Black And Earth As Green) Complete All As Specified And Directed By Engineer-In-Charge. Notes:-(A) Three Single Core 6 Sqmm Frlsh Pvc Insulated Unsheathed With Multistranded Copper Conductor Cable 1100 Volts Grade Shall Be Measured As One Length. 204 Supply And Fixing In Replacement Mcb 40Amp -63 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 205 Supply And Fixing In Replacement Mcb 6Amp -32 Amp Sp ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 206 Supply And Fixing In Replacement Mcb 32 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 207 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 8 Way 240 Volt, Ip -54, 200 Amps Rated Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 208 Supply And Fixing Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 12 Way 240 Volt, 200 Amps Rated Copper Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 209 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Ip-54 Protection, Flush Mounted For Metal Door, Powder Coated Db Tpn 4 Way, 415 V Ac With 63 Amps Rated Bus Bar, Double Door, Dust And Vermin Proof Suitable For Incorporation Of Incoming Mccb And Outgoing Mcb Sp/Tp And Earth & Neutral Bus Bar Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 210 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 20 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 211 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 25 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 212 Supply And Fixing Led Batten Fitting 1X10 Watt, 6500K, 2 Ft Complete With Decorative Ultra Slim Square Profile Led Lighting Fixture With Extruded Polycarbonate Environment Friendly, Energy Efficient Complete With All Light Connection All As Specified And Directed 213 Supply And Fixing In Repair Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminium Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Complete With Ip 65/66 Protection Including Fixing With Gi/Ms Bracket Made Out Of Suitable Size Of Light Grade Tube Upto 1.2 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Iron With Suitable Bolt And Nuts Complete With Making Connection Complete All As Specified And Directed 214 Supply & Fixing Building Security Led Light Of 35 Watt , Ip 66 , Luminaire With High Power With Toughened Glass Complete As Per ManufacturerS Instructions With And Including Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt ,Nuts And Washers Complete And Fixing To Wall / Column With And Including Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size And Testing Complete All As Specified And Directed By Engineer-In-Charge. Notes:(A) The Rate Of Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt And Nuts And Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (B) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Security Led Light Fittings Complete Including Lamps From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led /Luminaries. (C) All Security Led Light Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (D) Scope Of Work Shall Include To Fix Security Led Light Fittings Walls/Building Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account. 215 Supply And Fixing Jointing Of Double Walled Corrugated Pipe (Dwc) As Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 216 Supply And Fixing Jointing Of Snap Fit Coupler For Double Walled Corrugated Pipe (Dwc) Of Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 217 Supply And Fixing Mccb With Adjustable Type, 4 Pole, 63 Amps, 415 Volts, 50 Hz, 25 Ka And Including Sheet Metal Enclosure Out Door Type Made Out Of 3.15 Mm Thick Crca Sheet Mounted On Angle Iron Padesta Including Grouting Complete All As Specified And Directed By Engineer-In-Charge. 218 Material And Labour For Earthing Complete With Galvanised Steel Earth Plate Electrode 600Mm X 600Mm X 6 Mm Thick Burried Directly In Ground To Depth Of Pit Not Less Than 2.25 M Below Normal Ground Level With Top Edge Of The Plate Not Less Than 1.5 M Below Normal Ground Level Surrounded From All Sides By 15 Cm Thick Packed Layer Of Charcoal / Coal Dust And Common Salt Filling In Alternate Layers And Connected To Galvanised Earth Lead Wire 4 Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Gi Or Steel Including Gi Protection Pipe 15Mm Dia Light Grade Upto The Extent Of 7.5 Metre And Connecting To Earthing Test Point, Main Switch Board Including Gi Pipe 20 Mm Dia Light Grade For Watering, Ms Funnel And Bringing Out The Watering Pipe Upto 30 Cm Above The Normal Ground Level Plugged At Top Including All Fitting Including Pcc Earth Pit With Pcc 1:2:4 Type B-1 Using 20Mm Graded Stone Aggregate And Rcc Pit Cover Including Necessary Earthwork And Excavation In Any Type Of Soil Complete All As Specified As Shown In Electrical Plate No 3 Of Ssr Part-I And Testing On Completion. Note:- (I) Earth Continuity Of Gi Wire 4 Mm Including Protection Pipe Up To 7.5 Mtrs From Earth Electrode Will Be Included In Unit Rate, Complete All As Specified And Directed. (Ii) The Rate Of Earth Work In Soft/Loose Soil I.E. Excavation, Returing Filling And Removal, Form Work Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) Pcc Chamber Shall Be Constructed At Least 1.5 Metre Away From The Earth Electrode And Pipe For Watering Shall Be Provided In Slanting Manner. (Iv) The Earth Testing Arrangement Should Be Done By The Contractor As Per Direction Of Engineer-In-Charge. 219 Supply And Fixing 1100 Volts Grade Heavy Duty Cable Pvc Insulated Aluminium Strandred Conductor 6Sqmm, Served With Inner Sheathing Of Pvc Tape And Overall Pvc Sheathed In Service Connections Suspended By Insulating Hangers Not More Than 1 Mtr Apart Including 4Mm Suspenstion Wire, One Twin Core Cable Flat All As Specified And Directed 220 Supply And Fixing In Replacement Exhaust Fan 300Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 221 Supply And Fixing Exhaust Fan 250Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 222 Taking Down Unserviceable Complete Ceiling Fan Along With Blades And Deposited To Age E/M Store Yard Of Ge (South Bathinda) Complete All As Specified And Directed By Engr-In- Charge. 223 Supply & Fixing Ceiling Fan Of 1200Mm Sweep Complete With Blades, Down Rods, With And Including Remote Control, Single Phase, 50 Hz, Min Air Delivery 210 Cfm With Service Value 6.00 Bee. Five Star Rated With Brushless Direct Current (Bldc) Motor Connecting Up Complete With And Including Three Core Flexible Pvc Insulated Multi Stranded Copper Conductor Cable Of Suitable Size From Ceiling Rose / Connector, Including Extra Gi / Ms Pipe Down Rod, As Per Site Requirement , With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 224 Dismantling And Taking Down Of Existing Energy Meter And Refixing The Same Complete All As Specified And Directed By Engineer-In- Charge, 225 Dismantling And Taking Down Existing Geyser And Deposit In The Safe Custody / Store Yard Of Age E/M Of Ge (S) Bathinda And Refixing The Same After Carring Out Repair Work/ Rewiring Accn )Complete All As Specified And Directed By Engineer-In- Charge,
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Punjab View Result →
13.
Drinking Water Supply and Sanitation #11191668 Technical Bid
Tender for E-Quotation For Seeking Firm Rates For Non-Schedule Items For Preparing Estimates. , 3 H.P. Submersible Set , Providing All Labour, Tools, Tackles And Technicians For Taking Out 3 H.P. Submersible Pump Set With Column Pipe From Bore Well , Cost Towards Rewinding And Repairing Of 3 H.P Submersible Motor With Supply/Fixing Suitable Winding Wire, Bronze Bush Etc. All Complete After The Deduction Of Cost Of Scrap Materials. , Cost Towards Repairing Of 3 H.P. Submersible Pump With Supply/Fixing Bronze Impeller As Per Size And Sample, Bush, Thrust Plate, Pump Shaft Etc. All Complete After The Deduction Of Cost Of Scrap Materials. , Cost Towards Supplying Fitting, Changing 40 Mm Dia. Upvc Column Pipe. , Cost Towards Supplying And Fitting (1) 40 Mm Dia G.M. Full Way Valve - 1 No (2) 40 Mm Dia Nr Valve - 1 No (3) 40 Mm Dia G.I. Bend 2 Nos. (4) 40 Mm Dia M.S. Clamp With Nut Bolt 2 Pair After The Deduction Of Cost Of Scrap Materials. , Transportation Charge Of Above P/Set From Work Site To Work Shop And Vice Versa Including Loading And Unloading Charge. , Supplying And Installation Suitable Size Panel Board For 3 H.P. Submersible Pump Including Fixing On Wall Comparising Of Following Points Such As (1) D.O.L Starter - 1 No. (2) Hrc Fuse - 3 No. (3) Volt Meter With Selector Witch -1 Set (4) Ammeter With Selection Switch - 1 Set (5) Indicating Neon Lamp - 3 No. Etc. All Complete. , Providing All Labour, Tools Tackles And Technicians For Lowering Of 3 H.P Submersible Pump Set With All Accessories In The Bore Well , 5 H.P. Submersible Set , Providing All Labour, Tools, Tackles And Technicians For Taking Out 5 H.P. Submersible Pump Set With Column Pipe From Bore Well . , Cost Towards For Rewinding And Repairing Of 5 Hp Submersible Motor With Supply/Fixing 1.0 Swg Round Copper Winding Wire 24 Slot, Gun Metal Bush, Thrust Plate, Thrust Bearing, Diapharm, Oil Seal, Etc With Lathe Work. All Complete. After The Deduction Of Cost Of Scrap Materials. , Cost Towards Repairing Of 5 Hp Submersible Pump With Supply/Fixing Noryl Impeller As Per Size And Sample, Diffuser, S.S. Shaft, S.S. Coupling, S.S. Sleeve, Nut, C.I Nrv Etc. All Complete After The Deduction Of Cost Of Scrap Materials. , Cost Towards Supplying Fitting, Changing 50 Mm Dia. Upvc Column Pipe. , Supplying And Installation Suitable Size Panel Board For 5 H.P. Submersible Pump Including Fixing On Wall Comparising Of Following Points Such As (1) D.O.L Starter - 1 No. (2) Hrc Fuse - 3 No. (3) Volt Meter With Selector Witch -1 Set (4) Ammeter With Selection Switch - 1 Set (5) Indicating Neon Lamp - 3 No. Etc. All Complete. , Transportation Charge Of Above P/Set From Work Site To Work Shop And Vice Versa Including Loading And Unloading Charge. , Providing All Labour, Tools Tackles And Technicians For Lowering Of 5 H.P. Submersible Pump Set With All Accessories In The Bore Well , 7.5 H.P. Submersible Set - , Providing All Labour, Tools, Tackles And Technicians For Taking Out 7.5 H.P. Submersible Pump Set With Column Pipe From Bore Well . , Cost Towards For Rewinding And Repairing Of 7.5 Hp Submersible Motor With Supply/Fixing 1.0 Swg Round Copper Winding Wire 24 Slot, Gun Metal Bush, Thrust Plate, Thrust Bearing, Diapharm, Oil Seal, Etc With Lathe Work. All Complete. After The Deduction Of Cost Of Scrap Materials. , Cost Towards Repairing Of 7.5 Hp Submersible Pump With Supply/Fixing Noryl Impeller As Per Size And Sample, Diffuser, S.S. Shaft, S.S. Coupling, S.S. Sleeve, Nut, C.I Nrv Etc. All Complete After The Deduction Of Cost Of Scrap Materials. , Providing All Labour, Tools Tackles And Technicians For Lowering Of 7.5 H.P. Submersible Pump Set With All Accessories In The Bore Well , Transportation Charge Of Above P/Set From Work Site To Work Shop And Vice Versa Including Loading And Unloading Charge. , Provision For Leakage Repairing Of Different Size Of Upvc Sch- 80 Pipe In Place Of Existing / Cracked And Damaged Pipe Of Isi Approved Make Or Equivalent Make Damaged Pipe In Trenches And Replacement Of Pipe And Fitting So As To Give 1 M Average Cover Over The Socket Of Pipes With Disposal Of Excavated Earth Within Initial Lead And Lift And Necessary Fitting And Earth Work In Backfilling And Cutting Pipe To Size Etc. All Complete As Per Specification And Direction Of E/I. , Leakage In 65 Mm Dia Upvc Pipe , Leakage In 50 Mm Dia Upvc Pipe , Leakage In 40 Mm Dia Upvc Pipe , Leakage In 32 Mm Dia Upvc Pipe , Provision For Leakage Repairing Of Different Size Of Upvc Sch- 80 Pipe In Place Of Existing / Cracked And Damaged Pipe With Red Lead And Yarn Of Following Nominal Bore Screwed And Socketed Joints On Wall, Ceiling And Floor Including Supplying And Fitting On Wall Hooks Or Pipe Clamp Wooden Plugs, Cutting Pipe To Size And Threading Ends Where Necessary Etc. All Complete As Per Specification And Direction Of E/I. , Leakage In 40 Mm Dia Upvc Pipe , Leakage In 32 Mm Dia Upvc Pipe , Leakage In 25 Mm Dia Upvc Pipe , Supplying Of Materials For C.P. Bathroom Fitting For Consumption Day To Day Work. , 15Mm Dia C.P. Bib Cock (Long Thread) , 15Mm Dia C.P. Bib Cock , 15Mm Dia C.P. Pillar Cock (Long Neck) , 15Mm Dia C.P. Angular Stop Cock (Long Thread) , Cp Wall Flange , 15Mm Dia Cp Nipple With Coupling(Short Pieces) , Cp Head Shower , 32Mm Dia Cp Waste , Commode Cover , Teflon Tape , Swr S/S Pipe , 110Mm Dia Pvc Swr S/S Pipe - , 75Mm Dia Pvc Swr S/S Pipe - , Supplying All Materials ,Labours, Tools And Equipment For Laying Upvc Pipes Of Approved Make In Trenches With Upvc Solvent Solution With Socket And Screw Joints And Cutting Pipe As Per Size Etc. All Complete As Per Specification And Direction Of E/I. (In Trenches) , 50Mm Dia. Upvc Schedule 80 Pipe- (In Trenches) [Make-Supreme/Ashirwad/Paras] , 50Mm Dia. Upvc Schedule 80 Pipe- (In Wall) [Make-Supreme/Ashirwad/Paras] , 40Mm Dia. Upvc Schedule 80 Pipe- (In Trenches) [Make-Supreme/Ashirwad/Paras] , 40Mm Dia. Upvc Schedule 80 Pipe- (In Wall) [Make-Supreme/Ashirwad/Paras] , 32Mm Dia. Upvc Schedule 80 Pipe- (In Trenches) [Make-Supreme/Ashirwad/Paras] , 32Mm Dia. Upvc Schedule 80 Pipe- (In Wall) [Make-Supreme/Ashirwad/Paras] , 25Mm Dia. Upvc Schedule 80 Pipe- (In Wall & Overground) [Make-Supreme/Ashirwad/Paras] , Supplying And Fixing Upvc Fittings Of Approved Make All Complete As Per Specification And Direction Of E/I. , A) Upvc Elbow (90 Degree) 50Mm Dia. Upvc , 40Mm Dia. Upvc , 32Mm Dia Upvc , 25Mm Dia. Upvc , B) Equal Tee 50Mm Dia. Upvc , 40Mm Dia. Upvc , 32Mm Dia Upvc , 25Mm Dia. Upvc , C) Upvc Socket 50Mm Dia. Upvc , 40Mm Dia. Upvc , 32Mm Dia Upvc , 25Mm Dia. Upvc , D) Union Socket 50Mm Dia. Upvc , 40Mm Dia Upvc , 32Mm Dia Upvc , 25Mm Dia. Upvc , E) Reducing Bush 50 Mm X 40 Mm Dia. Upvc. , 50 Mm X 32 Mm Dia. Upvc. , 40 Mm X 32 Mm Dia. Upvc , 40 Mm X 25 Mm Dia. Upvc , 32 Mm X 25 Mm Dia. Upvc , E) Brass Fta 50Mm Dia. Upvc , 40 Mm Dia. Upvc , 32 Mm Dia. Upvc , 25Mm Dia. Upvc , 20Mm Dia. Upvc , F) Brass Mta 50Mm Dia. Upvc , 40 Mm Dia. Upvc , 32 Mm Dia. Upvc , 25Mm Dia. Upvc , 20Mm Dia. Upvc , 32Mm Dia. Pvc Waste Pipe , Pvc Connection Pipe , Supplying And Fixing U-Pvc Ball Valve Of Approved Make All Complete As Per Direction Of E/I.. , 50 Mm Dia U-Pvc Ball Valve , 40 Mm Dia U-Pvc Ball Valve , 32 Mm Dia U-Pvc Ball Valve , 25 Mm Dia U-Pvc Ball Valve , 20 Mm Dia U-Pvc Ball Valve , Supplying All Materials Tools And Equipment For Fixing Hdpe Water Storage Tank Triple Layer Gangotri/Himgiri/Hippo Or Any Other Approved Equivalent Make Conforming To Is 12701, 1996 Fixing On The Above Plateform Including, Cutting 3 Nos., Hole In Tank For Rising, Overflow, Delivery And Washout Including Supplying Full Thread Nipple With Jamnut And Fixing Connection Etc. And Supplying Fitting & Fixing Brass Ball Cock Of Required Size As Per Specification And Direction Of E/I. 2000 Litrs Capacity Water Tank. , Providing All Labour Tools And Matenals To Make Platform For 2000 L Hdpe Water Storage Tank 410 Dia X 6 Height By Doing Sand Filling, Brick Flat Soiling, Plaster & Net Cement Of Approved Quality All Complete As Per Direction Of E/I. , Supply, Installation Testing & Commissioning Of Water Chiller With In-Built 5-7 Stage Water Purification System Having Stainless Steel Storage Tank, Ss Pipings And Taps With 100 - 150 Liters. Storage Capacity And 100-120 Liters Per Hour Chilled & Purified Water Supply Of Reputed Make Like Voltas/Eureka Forbes/Blue Star/Usha Etc. With All Accessories Such As Voltage Stabilizer, Piping, Electrical Wiring Etc. And 1 Year Warranty Included. , Providing All Labour Tools And Materials To Make Platform For Water Chillers 3 X 2½ X 1½ By Doing Earth Excavation, Sand Filling, Brick Flat Solling, Plain Cement Concrete Plaster & Fitting Tiles Of Approved Quality All Complete As Per Direction Of E/I , Supplying & Laying 25 Mm Dia Upvc Pipe ( Apprx - 10 M ) For Connection Of Water Chiller And Drainage Of Wastage Water With All Fittings And Fixing Etc. All Complete. , Supplying & Fitting 32A Main Switch On The Wall Of A.D. Wall With All Materials, Labour & Tools Required. , Supplying Material And Labour For Construction Of Rcc(1:2:4) Protection Chamber For Hydt Bore Well Having Internal Size 0.6X0.6 Meter And Wakk Thicknessof 0.2 Meter With Required Depth As Per Site Condition Including 12Mm Thick C.P(1:4) Or Exposed Surface, Reinforced Cement Concrete Slab Cover And Fixing On Reinforced Cement Concrete Wall, Apply Two Coats Of Anti-Corrosion Paint Including The Cost Of Reinforcement, Carriage Of Materials All Taxes Earth Work Etc. , Supplying Materials And Construction Single Mounted Reinforced Cement Concrete 1:2:4 Stand Post As Per Approved Design Drawing & Specification Including Supplying & Fixing 15Mm Dia Brass Bib Cock Of Approved Make And Weight Not Less Then 350Gms. & 2 Mtr. : 15Mm Dia Gi Pipe Properly Embedded Including Fixing & Supplying Of Elbows, Nipple, Socket As Required But Excluding The Cost Of Platform And As Per Specification And Direction Of E/I. , Cost Towards Supplying And Installation Of Three Phase Submersible Pump Having Required Stages With Noryl Impeller Operating On 415 V ±15%, 50 Hz, 2900 Rpm Having Discharge 3000 To 4000 Lph Against A Total Head Of 120 Meters Coupled With Water Cooled Motor Including All Accessories Such As :- 50 Mm Dia Pvc Heavy Duty Pipe 120 Meters (Ii) 2.5 Mm² X 3 Core Flat Copper Cable-120 Meters Up To The Clamp (Iii) G.M Gate Valve-1 No. , G.M. Reflex Valve-1 No. On Delivery Pipe Line, Including All Fittings Bend Nipple Having Suitable Panel Board Having Suitable Starter, Main Switch Pilot Lamp, Voltmeter, Ampere Meter,Including ½ Dia Rope For Lifting And 2 Pair Ms Clamp Etc. Allcomplete. Including Digging Earth And Laying Cable Under 1.5Dia Black Pvc Pipe For Protection As Per Direction Of E/I. , Cost Towards Supplying And Installation Of Three Phase Submersible Pump Having Required Stages With Noryl Impeller Operating On 415 V ±15%, 50 Hz, 2900 Rpm Having Discharge 5000 To 7000 Lph Against A Total Head Of 120 Meters Coupled With Water Cooled Motor Including All Accessories Such As :- 50 Mm Dia Pvc Heavy Duty Pipe 120 Meters (Ii) 4.0 Mm² X 3 Core Flat Copper Cable-120 Meters Up To The Clamp (Iii) G.M Gate Valve-1 No. , G.M. Reflex Valve-1 No. On Delivery Pipe Line, Including All Fittings Bend Nipple Having Suitable Panel Board Having Suitable Starter, Main Switch Pilot Lamp, Voltmeter, Ampere Meter,Including ½ Dia Rope For Lifting And 2 Pair Ms Clamp Etc. All Complete Including Digging Earth And Laying Cable Under 1.5Dia Black Pvc Pipe For Protection As Per Direction Of E/I. , Providing All Material, Equipment And Wash Out And Cleaning Of 2000/1000 Litre Pvc Water Storage Tank Including Rubbing The Wall Of Tank By The Help Of Coconut, Rushi And Bleaching Powder And Washing By Clean Water All Complete As Per Direction Of E/I.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Jharkhand View Result →
14.
Power #11177233 AOC
Tender For The Various Dcw Works And Improvement Works In O And M Perambalur Division; 1 Excavation of Pole Pits for poles upto 8.00m length by using JCB/Manual (1.25 X 0.6 X 1.5M) 2 Excavation of Pole Pits for pole above 8.00m length by using JCB/Manual (1.25x06x1.83M) 3 Excavation of Pole Pits in Hard Soil (common to all size of poles) 4 Excavation of Pole Pits in rocky area (common to all size of poles) by blasting / Manual 5 Excavation of Stay pit of 4.5 to 5 depth using JCB / Manual (0.95 X 0.6 X 1.2 M) 6 Excavation of Stay pit in Hard rock soil (0.95 X 0.6 X 1.2 M) 7 Erection of RCC, REC, PSC poles upto 8.00m length by using Crane / Manual 8 Erection of RCC, REC, PSC poles above 8.00m length by using Crane / Manual 9 Erection of metal supports above 9m / RSJ / Rail Pole/Tubular Poles 10 Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc. excluding stay pit excavation 11 Erection of additional Stay in the same stay rod, excluding excavation of stay pit and burial of stay rod. 12 Fixing of V cross arm 3.5feet 13 Fixing of V cross arm4.5 feet 14 Fixing ofV cross arm5.0 feet 15 Fixing of Fixing of LT S phase cross arm 16 Fixing of Fixing of LT 3 phase cross arm 17 Fixing of Fixing of HT / LT Ti fitting 18 Fixing of Fixing of HT PIN insulator with Pin 11 kv 19 Fixing of HT PIN insulator with Pin 22 kv 20 Fixing of HT PIN insulator with Pin 33 kv 21 Fixing of LT PIN insulator with pin 22 Fixing of HT strain disc 11 KV with Metal parts 23 Fixing of HT strain disc 22 KV with Metal parts 24 Fixing of HT strain disc 33 KV with Metal parts 25 Fixing of Tapping cross arm 26 Fixing of Two Tapping cross arm per cut point upto 33 KV line including fixing of Discs,insulators and Jumpering etc.. 27 Fixing of Top Channel 28 Fixing & erection of Cross bracing 29 Fixing of shackle with Metal parts 30 Fixing of Aluminium knob 31 Fixing of HT LAS (3 Nos.) 32 Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor 33 Paving and stringing of conductors ofabove7/2.59 mm ACSR or other equivalent conductor upto 7/3.35mm ACSR or other equivalent conductor 34 Paving and stringing of conductors of7/4.09mm ACSR or other equivalent conductor 35 Paving and stringing of conductors of7/4.72 mm Dog Conductor or other equivalent conductor 36 Releasing and reerection (resagging) of one run of all sizes of conductor 37 Complete Erection of Double Pole Distribution Transformer structureas per TNEB standard likepole pit excavation & erection, stay pit excavation and erection, feeders arrangement, Open type fuse unit,HT / LT LAS and jumpering, 3 Nos Earth pits with earth trough, concreting,coping, Colour washing of RCC poles, Painting of Structure Materials (including cost of paint(red oxide,Aluminium) and distember), Danger Board fixing etc.. (excludingerection of Distribution Transformer) 38 Erection of11 KV/22 KV single pole Structure includingerection of DT complete with centre support with pole pit excavation & erection, stay pit excavation and erection, feeders arrangement, Open type fuse unit, HT /LT LAS and jumpering, 3Nos earth pits with earth trough, structure earthing complete, concerting,coping, colour washing of RCC poles, painting of structure materials (including cost of paint (red oxide,aluminum)and distermber), danger board fixing etc..(exculding erection of distribution transformer) (Data as per Annexure III) 39 Erection of distribution transformer inculding loading of distribution transformer at stores and erection at structure or vice versa. Upto 25 KVA distribution transformer/metering set. 40 Erection of Distribution Transformer including loading of Distribution Transformer at stores and erection at structure or vice versa. Upto 25 KVA to 100 KVA 41 Failed DT replacement below 100 KVA 42 Failed DT replacement 100 KVA and above 43 Erection of DP structure with stay as per TNEB standard including fixing of top channel, cross bracing, HG Fuse Unit, concreting, painting, colour washing etc., With 11 KV AB switch using all types of poles of size 9.14 m and above length 44 Erection of DP structure with stay as per TNEB standard with 22/33 KV AB switch using all types of poles of size 9.14 m and above lenth including fixing of top channel, cross bracing, HG Fuse Unit, concreting, painting, colour washing etc., 45 Erection of single pole DP with completewith earthing 46 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Mass concreting of poles with coping 0.6MX 0.45MX1.25M 47 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Sleeveconcreting with coping 0.6MX 0.6MX0.3M 48 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Stay concreting with coping 0.3M dia and 0.75 long 49 Earthing of poles with GI wires 4 or 6 SWG by coil earthing 50 Provision of spike with earthing arrangement including material (other than clamps & GI wire ) and fabrication 51 Pipie earthing including excavation of earth pit and fixing earth pipe 3 m length 52 Replacing the corroded earth pipes of transformer structure and replacing the earth wire completely with aluminium lugs for termination 53 Replacement of corroded earth pipe 54 Erection of fourth Earth pipe including earthing 55 Loading& unloading of REC, RCC, PSC pole upto 8.00 m length 56 Loading& unloading of All REC, RCC pole above 8.00 m length 57 Loading of Conductor with ramp 58 Unloading of Conductor with ramp 59 Loading of Iron & Steel 60 Unloading of Iron & Steel 61 Loading of line materials (Including Stacking except conductor drum & scrap material) 62 Unloading of line materials (Including Stacking except conductor drum & scrap material) 63 Loading of 11 KV disc 64 Unloading of 11 KV disc 65 Loading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc., 66 Unloading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc., 67 Loading of scrap materials 68 Unloading of scrap materials 69 Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 1.0 KM 70 Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM 71 Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM of lead of every KM 72 Transporting of Distribution Transformer / Line materials from stores to office / site upto 10KM distance by engaging 1 Ton capacity Minidor (Lorry) 73 Transporting of Distribution Transformer / Line materials from stores to office / site Above 10 KM distance by engaging 1 Ton capacity Minidor (Lorry) 74 Provision of guarding with two numbers earth pits excluding stay set erection - gradle guarding including earthing and earth pit excavation without material 75 Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit 76 Dismantling of stay set complete including stay rod 77 Dismantling of conductor ofupto 7/3.35 including transporting the conductors to the nearest road side and stocking in coils 78 Dismantling of conductor ofabove 7/3.35 including transporting the conductors to the nearest road side and stocking in coils 79 Dismantling of Transformer structure materials complete set and transporting the same from the location to the road side 80 Releasing of LT S ph X Arm with all accessories 81 Relaasing of LT 3 ph X Arm with all accessories 82 Releasing of 3 - 6 V Cross Arm/Tapping channal/GuardingX Arm with all accessories 83 Releasing of 4 - 6 andV Cross Arm with all accessories 84 Releasing of5V Cross Arm with all accessories 85 Releasing of Distn.Tr. Only at field - Upto 25 KVA / Metering set 86 Releasing of Distn.Tr. Only at field- Above 25 KVA and upto 100KVA 87 Dismantling of structure poles 88 Painting of iron poles up to 36 ft length with double coats including cost of paint 89 Painting of iron poles up to 40 ft 200/100 length with double coats including cost of paint 90 Painting of structure materials distribution transformers with aluminium paint of structure poles and writing of transformer details (Paint to be supplied by Department) 91 Labour charges for alteration of back clamp 92 Labour charges for alteration of Stay clamp 93 Providing of holes all size angles/Channel upto 3/4 94 Providing of holes all size angles/Channel above 3/4 95 Clearing of tree branches of coconut tree 96 Clearing of tree branches of Neem, Tamarind, Country tree 97 Clearing of karruvelam 98 Converting pin point into cut point in HT Lines 99 Converting pin point into cut point in LT Lines (single / Three phase) 100 Resagging of lines for all sizes cut point location 101 Set right of leaning poles both HT & LT (Pin point ) 102 Set right of leaning poles both HT & LT ( Cutpoint) 103 Replacement of Guy Shackle only in Existing Stay 104 Replacement of 11KV Polymer Pin Insulator 105 Replacement of 22KV Polymer Pin Insulator 106 Replacement of 33KV Polymer Pin Insulator 107 Replacement of 11KV Disc 108 Replacement of 22KV Disc 109 Fencing of Distribution Transformer Structure at Road side- Fabrication and Erection including all materials (Chain link fencing)
Contract Date: May 26, 2026 Contract Value : ₹ 25.00 Lakh
Boards / Undertakings / PSU No of Bidders 2
Tamil Nadu View Result →
15.
Tourism #11175186 Price Bid
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation In Trenches For All Leads & Lifts In All Type Of Strata Comprising Of Any Type Of Materials Either In Full Or Part As The Case May Be Adopting Any Method/Methods As May Be Convenient As Permitted Excluding Blasting In All Conditions Such As Dry, Moist, Foul, Saturated, Submerged, Etc,. Including Dressing Of Sides, Planking & Strutting, Timbering ,Ramming Of Bottom ,Pumping And Bailing Out Water ,Barricading Danger Lighting Guarding, Getting Out Excavated Soil & Stacking As Directed By Engineer For All Leads & Lifts Etc. Complete , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Supplying And Filling In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. Moorum , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level. M-30 Grade Of Concrete , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Foundations, Footings, Bases For Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. I.Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc.String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 M Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing : In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Providing And Fixing Exposed Laterite Stone Of 100 Mm Thk For Dado ,Laid On Cement Mortar Paste 1:4 (1 Cement : 4 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Stone Including Rubbing Including Applying Acrylic Varnish Etc Complete. As Per Designs And The Directions Of The Engineer-In-Charge. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And And Laying Vitrified Floor Tiles In Different Sizes Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make In Colours And Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigment Etc., Complete. 600X 600 Mm Dark Shades , Providing And Laying Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Lakha Red , Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid . Plain White Makrana Slab 25Mm Thick , Marble Stone Flooring With 18 Mm Thick Marble Stone (Sample Of Marble Shall Be Approved By Engineer-In-Charge) Over 20Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement:4 Coarse ) Using : White Makrana Marble , Providing And Laying 300X350x160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete). , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 30 Cm Lx 40 Cm H X 15 Cm T , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Demolishing Reinforced Cement Concrete Work Including Stacking Of Steel Bars & Disposal Of Unserviceable Within 50 Steel Bars & Disposal Of Unserviceable Within 50 , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. 12 Mm Cement Plaster 1 :3 ( 1 Cement : 3 Sand) , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws, Plugs And Priming Coat On Unexposed Surfaces Etc. 50 X 12 Mm , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 250 X 16X 5Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Providing And Fixing 150 Mm. Bright Finished Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutter Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete , Providing And Applying Decorative Plastering For A Window Sorrounding, Using 1:4 Morter Mixture With Bricks Chips,Featuring A 300Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer. (The Job Involves Applying A Decorative Finish Over Underlying Structure, Incorporation Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Double Piller At The Corner (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center For Hall(Ht 2.10 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 200Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Arch Of Span Of 3Mt., Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Flowers At The Ceiling With Dia. 1.20Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering Ofr Cornice At Ceiling In Hall Of Ht 0.40Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Construction And Installation 6Mt Height Replica Of Shree Suptakoteswar Stumb Using Sadhahalli Grey Granite Stone With Intricate Carvings, Moulding As Per Drawing. The Structure Should Have 6Mt Ht. With 2.5 X2.5X0.70 Mt Ht At Base And Stumb Of 1.50X1.50X5.25 Mt Height At Top As Per Details Drawings And Direction By The Engineer. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Paduka For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A 150Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Padma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Kumuda For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Adhopadma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Big Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2100Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Karnakuta ), Using 1:4 Morter Mixture With Bricks Chips, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1500Mm Height ,750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Cornice ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 750Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1200Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Adhopadma For Sajja), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Cornice Above Adhopadma ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Yalli ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Electrical Works , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 1/2 Core 70Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 1.5 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 2.5 Sq.Mm , Supply Of 4 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core 2.5 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(A) In Soily Strata , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 70 Sq. Mm. , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator)(K) 12 Way (8+36), Double Door, Horizontal Type Cat B , Supplying And Fixing 40 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(E) Tpn, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C -- With Cat B Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.(C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.A) 20 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.B) 25 Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Requiredd) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Requireda) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredb) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(C) 6 Module (200Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredsitc Of Wall Fan,600 Mm Sweep, With All Accessories. , Supply Installation Testing And Commissioning Of 8-10 W Spot Light Cob Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supply Installation Testing And Commissioning Of W 80W Flood Light Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =600X1500(H),Lamp Base- G9, Wattage- 7X42w Max, Complete With All Accessories. , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =1200X1500(H),Lamp Base- G9, Wattage- 12X42w Max, Complete With All Accessories. , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark,Of Approved Brands, Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. With Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineerincharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe. G)Watering Arrangement(Plumbing Will Be Paid Seperately). , Supply Installation Testing and Commissioning of 12W Multi Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 12W, Cct : Rgbw, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 400Mm. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 80W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo Separate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of High Quality Multi Color Neon Flexible Light, Protection Rating : Ip65, Mounting Structure : Adjustable Wall Mount Ss Clips For Fixing The Lights. Power Consumption : 12W, Cct : Rgb/Rgbw, (As Per The Design Approval) Beam Angle : 120º, Control : Dmx512 Channel : 4 Ch, Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Time Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Epistar, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 50W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of Aluminium Profile For Neon Flex , Supply Installation Testing and Commissioning of Dc Power Driver For The Above Lights, Power : 200W, Input : Ac 110-240V Ac, 50Hz, Output : Dc 12/24V, Protection Rating, Ip67, Surge Protection : Ll 4Kv, Le 6Kv , Supply Installation Testing and Commissioning of High Quality Dmx Decoder, Power Input : Dc 24V , Supply Installation Testing and Commissioning of Pvc Insulated Multi Core Electrical Un Armoured Flexible 5C X 0.5Sq Mm Power Cable Having Less Electrical Losses. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 5 Core Dmx Cable Comprises Twisted Pairs With Shield Support For Carrying Of Data. Dmx512 Cable Is Used For Connecting All Light Consoles That Use Dmx 512 Standard Data Transmission. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete For Both Power And Dmx. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of Ip65 I Power Connectors Having 3/4 Pole Cable Connector, Chuck Type Strain Relief, Current Rating 20 A Rms Continuous, Easy And Extremely Precise Locking System Quick Lock High Impact Materials - Long-Lasting And Reliable , Supply Installation Testing and Commissioning of Ip65 I Dmx Connectors Having 3/5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Male Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Female Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of Power Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options. - 12 Nos Of 6/10A Sp Outgoing Mcbs. - 1No Of 32A Tpn Incoming Mcb. , Supply Installation Testing and Commissioning of Ip Driver Box Made Up Of Pvc / Upvc And Ivory Connectors For The Internal Terminations And External Outgoing Connecting Points, Fiber / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. , Supply Installation Testing and Commissioning of Dmx Isolator Or Splitter Provides Isolated Optical Dmx Splitter Provides 8 Outputs From A 1 Input And Input Voltage: Ac 110 To 220 V, 50 Hz, Product Features: Group 1 & Group 8 Dmx Signal Change. , Supply Installation Testing and Commissioning of Din Rail Mount Dmx Controller Can Be Used To Control A Wide Variety Of Different Dmx Systems- From Rgb/Rgbw To More Advanced Moving And Color Mixing Luminaires, Dmx Audio Players And Fountains. The Controller Comes With A Variety Of Features, Iphone/Ipad/Android Remote Control, Wi-Fi Facilities, Dry Contact Port Triggering And Flash Memory.Usb Connection • 1024 Dmx Channels Universe In Live Mode (Computer) • 8 Dry Contact Trigger Ports Via He10 Connector • Stand Alone Mode With 5 Area And 90+ Scenes, Mac Osx 10.6/10.7/10.8 - Windows Xp/Vista/Seven/8 32/64 Bits And Usb 2.0, Xlr3, Mini Usb, 1 He10, Power From 5V To 5.5V Dc (Ac/Dc Adapter In Option. , Supply Installation Testing and Commissioning of Programming Charges , Supply Installation Testing and Commissioning of Additional Accessories For Installing The Lights As Per The Final Drawing/Site Condition Consisting Of Clamps, Brackets, Angles, Conduits, Joints, Hardwares Like Fasteners, Nut & Bolts Etc., , Street Light Panel: Supply, Installation, Testing And Commissioning Of Lt Panel Ip- 67 Outdoor Type,Floor Mounted Panel, Shall Be Suitable For 415 V, 3 Phase, 4 Wire, 50Hz Supply System. With 3 Phase Energy Meter And 100A Tpn Mcb As Incommer And 11 Nos Of Tpn Mcb As Outgoing With 3 Numbers Of Microcontoller Based Programmable Digital Almac Timer As Directed By Engineer In-Charge
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Goa View Result →
16.
Power #11115938 Price Bid
Tender For Estimate For 11 Kv Baifarcation Dimabar (Khadgaon) Agr Dlf Feeder Dimabar S/S Under Ladkui D/C Of (Oandm) Dn. Bhairunda - 140 Kg.,8.0 Mtrs. long PCC pole 2 WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 3 IRON STEEL SCRAP 4 ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) 5 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 6 Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) 7 Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) 8 Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) 9 Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured) 10 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps 11 11 KV Single Phase PTs. (Resin Molded) 12 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel 13 11 KV control & relay panel with numerical static relay for double feeder protection 14 11 KV, ISOLATOR 800 AMP.(Turn and twist type) 15 11 KV AB Switch Porceline 400 Amp with Complete accessories. 16 11 KV Pin Insulator Polymer Composit (5 KN) 17 11 KV Strain hardware (T&C type) fittings 18 11 KV(45KN) Composite Polymer Disc Insulators 19 33 KV (45KN) Composite Polymer Disc Insulators 20 M S Channel 100X50x6 mm 21 M.S.Angle 50x50x6 mm 22 M S Angle 65X65X6 mm 23 G.I. Wire 3.15 mm. (10 SWG) 24 9 KV Gapless type(5 KA) polymer lightening arrestor 25 3 phase 4 wire 3x63.5 volts lb=5 amps Imax = 10 amp, HT trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible ) modems (For substation metering) 26 Red oxide paint 27 Aluminium paint 28 Back filling of poles with boulders. 29 M.S.Flat 50x6 mm 30 Carpet guarding 31 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 32 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 33 M.S.Nuts with Bolts 34 Danger Boards Enamelled 11 KV 35 Danger Boards Enamelled 33 KV 36 Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor 37 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 38 Aluminium Binding wire and tape 39 Stay Insulators 90X65mm 40 Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 41 MS strain plate 65x8mm 250mm long 42 STAY WIRE 7/3.15 MM.(7/10 SWG) 43 Stay set complete without Stay wire 16 mm. (Painted) 44 Stay set 20 mm. complete without Stay wire (Painted) 45 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 46 Stringing of Each 11 KV Bus-upper and lower bus including, drop jumpering and jointing with clamps,through outgoing VCB/ ME/ DP, upto station transformer 47 Erection of Plinth per VCB- 33KV or 11KV 48 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 49 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 50 Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth 51 Concreting of structures & foundation (1:3:6) 52 G.I.Pipe 40 mm Dia C grade type 53 G.I. STRIP 25X3 MM1 54 Galvanized nut & bolt with washer 55 Bentonite compound powder 56 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor 57 Marshelling box with 10 no. connectors 58 SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB 59 Stone Block/Pre cast block for base pedding(450X450X75MM) 60 T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG 61 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 62 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 63 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal 64 GST on Transportation @5% 65 GST on (Contractor side Material + Labour) @18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
17.
Power #11115937 Price Bid
Tender For Estimate For 11 Kv Baifarcation Sonthiya Agr (Neelkanth) Feeder Neelkanth S/S Under Bhairunda D/C Of (Oandm) Dn. Bhairunda - IRON STEEL SCRAP 2 140 Kg.,8.0 Mtrs. long PCC pole 3 WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 4 H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-13 mtr. Long = 482.3 kg 5 ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) 6 (v) ACSR Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.), (6/4.72 + 7/1.57 mm) 7 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 8 11 KV Under-Ground XLPE armoured Cable 3X300 Sq.mm. 9 Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) 10 Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) 11 Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) 12 Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured) 13 G.I. Wire 3.15 mm. (10 SWG) 14 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps 15 11 KV Single Phase PTs. (Resin Molded) 16 M S Channel 100X50x6 mm 17 M.S.Angle 50x50x6 mm 18 M S Angle 65X65X6 mm 19 M S FLAT 65X8 mm 20 11 KV, ISOLATOR 800 AMP.(Turn and twist type) 21 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel 22 11 KV control & relay panel with numerical static relay for double feeder protection 23 9 KV Gapless type(5 KA) polymer lightening arrestor 24 3 phase 4 wire 3x63.5 volts lb=5 amps Imax = 10 amp, HT trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible ) modems (For substation metering) 25 11 KV Strain hardware (T&C type) fittings 26 11 KV(45KN) Composite Polymer Disc Insulators 27 11 KV Pin Insulator Polymer Composit (5 KN) 28 33 KV (45KN) Composite Polymer Disc Insulators 29 SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB 30 Red oxide paint 31 Aluminium paint 32 M.S.Flat 50x6 mm 33 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 34 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 35 M.S.Nuts with Bolts 36 Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor 37 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 38 Aluminium Binding wire and tape 39 11 KV V cross arm 65X65X6 mm. angle type 40 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 41 Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 42 MS strain plate 65x8mm 250mm long 43 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 44 Danger Boards Enamelled 11 KV 45 Danger Boards Enamelled 33 KV 46 Stay Insulators 90X65mm 47 Back filling of poles with boulders. 48 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 49 Stay set complete without Stay wire 16 mm. (Painted) 50 Stay set 20 mm. complete without Stay wire (Painted) 51 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 52 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 53 Stringing of Each 11 KV Bus-upper and lower bus including, drop jumpering and jointing with clamps,through outgoing VCB/ ME/ DP, upto station transformer 54 Erection of Plinth per VCB- 33KV or 11KV 55 Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth 56 Concreting of structures & foundation (1:3:6) 57 G.I. STRIP 25X3 MM1 58 G.I.Pipe 40 mm Dia C grade type 59 Galvanized nut & bolt with washer 60 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor 61 Stone Block/Pre cast block for base pedding(450X450X75MM) 62 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 63 Marshelling box with 10 no. connectors 64 Bentonite compound powder 65 Outdoor heat shrinkable cable end jointing kit with lugs for 11 kV grade XLPE cable for 3 core 300 sq mm Latest applicable IS:13573/2011/Part-II with latest amendments 66 T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG 67 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 68 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal 69 GST on Transportation @5% 70 GST on (Contractor side Material + Labour) @18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
18.
Power #11115936 Price Bid
Tender For Estimate For 11 Kv Baifarcation Chhidgaon Agr Feeder Neelkanth S/S Under Bhairunda D/C Of (Oandm) Dn. Bhairunda - 140 Kg.,8.0 Mtrs. long PCC pole 2 WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 3 IRON STEEL SCRAP 4 ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) 5 (v) ACSR Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.), (6/4.72 + 7/1.57 mm) 6 AAAC Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.) 7 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 8 Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) 9 Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) 10 Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) 11 Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured) 12 G.I. Wire 3.15 mm. (10 SWG) 13 M S Channel 100X50x6 mm 14 M.S.Angle 50x50x6 mm 15 M S Angle 65X65X6 mm 16 M S FLAT 65X8 mm 17 11 KV Pin Insulator Polymer Composit (5 KN) 18 33 KV (45KN) Composite Polymer Disc Insulators 19 11 KV(45KN) Composite Polymer Disc Insulators 20 11 KV Strain hardware (T&C type) fittings 21 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps 22 11 KV Single Phase PTs. (Resin Molded) 23 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel 24 11 KV control & relay panel with numerical static relay for double feeder protection 25 9 KV Gapless type(5 KA) polymer lightening arrestor 26 3 phase 4 wire 3x63.5 volts lb=5 amps Imax = 10 amp, HT trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible ) modems (For substation metering) 27 D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel 28 Red oxide paint 29 Aluminium paint 30 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 31 M.S.Nuts with Bolts 32 Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor 33 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 34 Aluminium Binding wire and tape 35 Back filling of poles with boulders. 36 Carpet guarding 37 11 KV V cross arm 65X65X6 mm. angle type 38 11 KV Bridling cross arms 65x65x6mm 39 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 40 MS strain plate 65x8mm 250mm long 41 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 42 Stay set complete without Stay wire 16 mm. (Painted) 43 Stay set 20 mm. complete without Stay wire (Painted) 44 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 45 Danger Boards Enamelled 11 KV 46 Danger Boards Enamelled 33 KV 47 M.S.Flat 50x6 mm 48 Stay Insulators 90X65mm 49 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 50 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 51 Erection of Plinth per VCB- 33KV or 11KV 52 Stringing of Each 11 KV Bus-upper and lower bus including, drop jumpering and jointing with clamps,through outgoing VCB/ ME/ DP, upto station transformer 53 Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth 54 Concreting of structures & foundation (1:3:6) 55 SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB 56 11 KV Under-Ground XLPE armoured Cable 3X300 Sq.mm. 57 Outdoor heat shrinkable cable end jointing kit with lugs for 11 kV grade XLPE cable for 3 core 300 sq mm Latest applicable IS:13573/2011/Part-II with latest amendments 58 T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG 59 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 60 G.I.Pipe 40 mm Dia C grade type 61 G.I. STRIP 25X3 MM1 62 Galvanized nut & bolt with washer 63 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor 64 Stone Block/Pre cast block for base pedding(450X450X75MM) 65 Bentonite compound powder 66 Marshelling box with 10 no. connectors 67 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 68 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal 69 GST on Transportation @5% 70 GST on (Contractor side Material + Labour) @18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Madhya Pradesh View Result →
19.
Power #11115935 Price Bid
Tender For Estimate For 11 Kv Baifarcation Chhidgaon Agr Feeder Bhadakui S/S Under Ladkui D/C Of (Oandm) Dn. Bhairunda - WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 2 IRON STEEL SCRAP 3 140 Kg.,8.0 Mtrs. long PCC pole 4 ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) 5 AAAC Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.) 6 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 7 Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) 8 Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) 9 Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) 10 Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured) 11 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps 12 11 KV Single Phase PTs. (Resin Molded) 13 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel 14 11 KV control & relay panel with numerical static relay for double feeder protection 15 11 KV, ISOLATOR 800 AMP.(Turn and twist type) 16 9 KV Gapless type(5 KA) polymer lightening arrestor 17 3 phase 4 wire 3x63.5 volts lb=5 amps Imax = 10 amp, HT trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible ) modems (For substation metering) 18 M S Channel 100X50x6 mm 19 M.S.Angle 50x50x6 mm 20 M S Angle 65X65X6 mm 21 M S FLAT 65X8 mm 22 G.I. Wire 3.15 mm. (10 SWG) 23 11 KV Pin Insulator Polymer Composit (5 KN) 24 33 KV (45KN) Composite Polymer Disc Insulators 25 11 KV(45KN) Composite Polymer Disc Insulators 26 11 KV Strain hardware (T&C type) fittings 27 M.S.Flat 50x6 mm 28 Red oxide paint 29 Aluminium paint 30 Back filling of poles with boulders. 31 STAY WIRE 7/3.15 MM.(7/10 SWG) 32 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 33 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 34 M.S.Nuts with Bolts 35 Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor 36 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 37 Aluminium Binding wire and tape 38 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 39 Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 40 MS strain plate 65x8mm 250mm long 41 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 42 Danger Boards Enamelled 11 KV 43 Danger Boards Enamelled 33 KV 44 Stay Insulators 90X65mm 45 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 46 Stay set complete without Stay wire 16 mm. (Painted) 47 Stay set 20 mm. complete without Stay wire (Painted) 48 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 49 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 50 Concreting of structures & foundation (1:3:6) 51 Stringing of Each 11 KV Bus-upper and lower bus including, drop jumpering and jointing with clamps,through outgoing VCB/ ME/ DP, upto station transformer 52 Erection of Plinth per VCB- 33KV or 11KV 53 Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth 54 G.I. STRIP 25X3 MM1 55 G.I.Pipe 40 mm Dia C grade type 56 Galvanized nut & bolt with washer 57 Bentonite compound powder 58 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor 59 Carpet guarding 60 Marshelling box with 10 no. connectors 61 SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB 62 Stone Block/Pre cast block for base pedding(450X450X75MM) 63 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 64 T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG 65 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 66 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal 67 GST on Transportation @5% 68 GST on (Contractor side Material + Labour) @18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
20.
Power #11115929 Price Bid
Estimate For 11 Kv Bifurcation Tiladiya Agr Feeder Rala S/S Under Bhairunda D/C Under Bhairunda Dn. - WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 2 140 Kg.,8.0 Mtrs. long PCC pole 3 IRON STEEL SCRAP 4 ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) 5 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 6 AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 7 XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts 8 Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) 9 Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) 10 Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) 11 Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured) 12 G.I. Wire 3.15 mm. (10 SWG) 13 M S Channel 75X40x6 mm 14 M S Channel 100X50x6 mm 15 M.S.Angle 50x50x6 mm 16 M S Angle 65X65X6 mm 17 M S FLAT 65X8 mm 18 Stay Insulators 90X65mm 19 11 KV Pin Insulator Polymer Composit (5 KN) 20 33 KV (45KN) Composite Polymer Disc Insulators 21 11 KV(45KN) Composite Polymer Disc Insulators 22 11 KV Strain hardware (T&C type) fittings 23 11 KV Single Phase PTs. (Resin Molded) 24 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps 25 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel 26 11 KV control & relay panel with numerical static relay for double feeder protection 27 11 KV, ISOLATOR 800 AMP.(Turn and twist type) 28 11 KV AB Switch Porceline 400 Amp with Complete accessories. 29 9 KV Gapless type(5 KA) polymer lightening arrestor 30 9 KV Gapless type ( 5KA) Polymer for DTR 31 11 KV D.O. Fuse Unit Polymer type 32 D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel 33 D.O.Mounting Channel 75x40x6mm 34 Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box 35 3 phase 4 wire 3x63.5 volts lb=5 amps Imax = 10 amp, HT trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible ) modems (For substation metering) 36 Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC 37 Bi-metallic clamps Distribution Transformers Bushing 38 Red oxide paint 39 Aluminium paint 40 Back filling of poles with boulders. 41 M.S.Flat 50x6 mm 42 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 43 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 44 M.S.Nuts with Bolts 45 Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor 46 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 47 Aluminium Binding wire and tape 48 Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 49 Clamp for 140 Kg PCC Pole MS Flat 50x6 mm 50 MS strain plate 65x8mm 250mm long 51 STAY WIRE 7/3.15 MM.(7/10 SWG) 52 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 53 Stay set complete without Stay wire 16 mm. (Painted) 54 Stay set 20 mm. complete without Stay wire (Painted) 55 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 56 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 57 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 58 Danger Boards Enamelled 11 KV 59 Danger Boards Enamelled 33 KV 60 G.I. WIRES 4.0 MM. (8 SWG) 61 Carpet guarding 62 Erection of Plinth per VCB- 33KV or 11KV 63 Stringing of Each 11 KV Bus-upper and lower bus including, drop jumpering and jointing with clamps,through outgoing VCB/ ME/ DP, upto station transformer 64 Complete jumpering of DTR 65 Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth 66 Concreting of structures & foundation (1:3:6) 67 G.I. STRIP 25X3 MM1 68 G.I.Pipe 40 mm Dia C grade type 69 Bentonite compound powder 70 Galvanized nut & bolt with washer 71 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor 72 Stone Block/Pre cast block for base pedding(450X450X75MM) 73 Marshelling box with 10 no. connectors 74 SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB 75 Meter cum protection box for 25 KVA DTR 76 T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG 77 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 78 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 79 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal 80 GST on Transportation @5% 81 GST on (Contractor side Material + Labour) @18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
21.
Power #11115922 Price Bid
Tender For Estimate For 2 Km. 11 Kv Line Conductor Aug. Work Amon To Silgena Pump Under Baktara D/C Of (Oandm) Budni; 1 140 Kg.,8.0 Mtrs. long PCC pole 2 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 3 M S Angle 65X65X6 mm 4 M S Channel 100X50x6 mm 5 M S Channel 75X40x6 mm 6 11 KV Pin Insulator Polymer Composit (5 KN) 7 11 KV(45KN) Composite Polymer Disc Insulators 8 11 KV Strain hardware (T&C type) fittings 9 M.S.Flat 50x6 mm 10 Red oxide paint 11 Aluminium paint 12 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 13 Back filling of poles with boulders. 14 G.I. WIRES 4.0 MM. (8 SWG) 15 Danger Boards Enamelled 11 KV 16 Aluminium Binding wire and tape 17 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 18 M.S.Nuts with Bolts 19 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 20 Stone Block/Pre cast block for base pedding(450X450X75MM) 21 Additional Erection Charge 22 Dismentelling 23 CONDUCTOR ACSR SCRAP( Return material Side To Area Store BHOPAL ) 24 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 25 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal 26 GST on Transportation @5% 27 GST on (Contractor side Material + Labour) @18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Madhya Pradesh View Result →
22.
Power #11115917 Price Bid
Tender For Estimate For 8 Km. 11 Kv Line Cond. Augmantation Work Ramgara S/S To Ramgara Agr Under Rehti D/C Of (Oandm) Budni - 140 Kg.,8.0 Mtrs. long PCC pole 2 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 3 M S Angle 65X65X6 mm 4 M S Channel 100X50x6 mm 5 M S Channel 75X40x6 mm 6 11 KV Pin Insulator Polymer Composit (5 KN) 7 11 KV(45KN) Composite Polymer Disc Insulators 8 11 KV Strain hardware (T&C type) fittings 9 M.S.Flat 50x6 mm 10 Red oxide paint 11 Aluminium paint 12 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 13 Back filling of poles with boulders. 14 G.I. WIRES 4.0 MM. (8 SWG) 15 Danger Boards Enamelled 11 KV 16 Aluminium Binding wire and tape 17 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 18 M.S.Nuts with Bolts 19 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 20 Stone Block/Pre cast block for base pedding(450X450X75MM) 21 Additional Erection Charge 22 Dismentelling 23 CONDUCTOR ACSR SCRAP( Return material Side To Area Store BHOPAL ) 24 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 25 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal 26 GST on Transportation @5% 27 GST on (Contractor side Material + Labour) @18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
23.
Power #11110319 Technical Bid
Tender for Rate Contract For Procurement Of Material That May Be Required During The Emergencies For The Year 2026-27 In Respect Of Ed-3Rd , Supply Of , 50 Mm² Ab (Ht) Cable (3X50 + 1X70 Mm²) Xlpe(11 Kv, 3C + Earth) , 70 Mm² Ab (Ht) Cable (3 X 70 + 95 Mm²) Xlpe(11 Kv, 3C + Earth) , 120 Mm² Ab (Ht) Cable (3X120 + 1X95 Mm²) Xlpe(11 Kv, 3C + Earth) , 150 Mm² Ab (Ht) Cable (3X150 + 1X95 Mm²) Xlpe(11 Kv, 3C + Earth) , 185 Mm² Ab (Ht) Cable (3X185 + 1X95 Mm²) Xlpe(11 Kv, 3C + Earth) , 11 Kv Heat Shrinkable Outdoor Cable Termination Kit Upto 50- 95 Sqmm ( 3 Core) , Heat Shrinkable Outdoor Cable Termination Kit Above 120 To 185 Sqmm ( 3 Core) , Mid Span Straight Through Jointing Kit For 11 Kv Abc 120 -185 Sqmm , 35 Mm² Ab (Lt) Cable ( 3 X 35 + 1 X 16 + 1 X 25 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 50 Mm² Ab (Lt) Cable ( 3 X 50 + 1 X 16 + 1 X 35 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 70 Mm² Ab (Lt) Cable ( 3 X 70 + 1 X 16 + 1 X 50 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 95 Mm² Ab (Lt) Cable ( 3 X 95 + 1 X 16 + 1 X 70 Mm²(Insulated Messenger)) Xlpe (1.1Kv, 3+1 C, Al) , 120 Mm² Ab (Lt) Cable ( 3 X 120 + 1 X 16 + 1 X 70 Mm²) Xlpe (1.1Kv, 3+1 C, Al) , Mid Span Straight Through Jointing Kit For 1.1 Kv Abc 95-150 Sqmm , Mid Span Straight Through Jointing Kit For 1.1 Kv Abc 35-70 Sqmm , 70 Mm² Single-Core Cable, 1.1Kv Grade, Xlpe Un-Armoured Frls Type , 95Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 120 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 150 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 185 Mm² Cable, 1.1Kv Grade, Xlpe Un Armoured Frls Type , 240 Mm² Single Phase Cable,1.1K V Grade, Xlpe Un Armoured Frls Type , 300 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 400 Mm² Single Phase Cable,1.1K V Grade, Xlpe Un Armoured Frls Type , 500 Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 630Mm² Xlpe Lt Cable Single Core, Un-Armoured, Frls , 10 Mm² Cable (2C), 1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 16 Mm² Cable (2C), 1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 10 Mm² Cable (4C), 1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 16 Mm² Cable (4C),1.1K V Grade, Armoured, Pvc Insulated Stranded Conductor Frls Type , 25 Mm² Xlpe Lt Cable 4 Core, Armoured, Frls , 35 Mm² Xlpe Lt Cable 4 Core, Armoured, Frls , Single Core 1 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 1.5 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 2.5 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 4 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , Single Core 6 Mm² Cable Copper Wire , 1.1 Kv Grade, Isi, Frls. , 11 Kv, 3- Core Xlpe 35 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 50 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 70 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 120 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 150 Mm² Round Wire Armoured, Frls Cable , 11Kv, Three Core 185 Mm2 Aluminium Round Wire Armoured Xlpe Cable , Frls , 11 Kv, 3- Core Xlpe 240 Mm² Round Wire Armoured, Frls Cable , 11 Kv, 3- Core Xlpe 400 Mm² Round Wire Armoured, Frls Cable , 11 Kv End Termination For 3C 120- 185 Mm² , 11 Kv End Termination For 3C 240 To 400 Mm² , 11 Kv Straight Through Jointing Kit Upto 50-95 Mm² , 11 Kv Straight Through Jointing Kit Upto 120-185 Mm² , 11 Kv Straight Through Jointing Kit Upto 240-300 Mm² , 11 Kv Straight Through Jointing Kit Upto 400 Mm² , Lt Distribution Box For 25 Kva Dtr With 40 annual periodical maintenance Mccb 3P 16 Ka For Incomer & 25 annual periodical maintenance Mccb 3P 16 Ka/10 Ka 1 No. Each (=2No.) For Outgoing Circuits . , Lt Distribution Box For 63 Kva Dtr With 100 annual periodical maintenance Mccb 3P 16 Ka For Incomer & 100 annual periodical maintenance Mccb 3P 16 Ka 1 No. And 63 annual periodical maintenance Mccb 3P 16 Ka 1 No.S For Outgoing Circuits , Lt Distribution Box For 100 Kva Dtr With 160 Mccb 3P 16 Ka For Incomer & 100 annual periodical maintenance Mccb 3P 16 Ka 2 No.S For Outgoing Circuits , Lt Distribution Box For 200 Kva Dtr With 315 annual periodical maintenance Mccb 3P 25 Ka For Incomer & 160 annual periodical maintenance Mccb 3P 16 Ka 3 No.S For Outgoing Circuits , Lt Distribution Box For 250 Kva Dtr With 400 annual periodical maintenance Mccb 3P 36 Ka For Incomer & 200 annual periodical maintenance Mccb 3P 16 Ka 1 No. And 160 annual periodical maintenance Mccb 3P 16 Ka 2 No.S For Outgoing Circuits , Lt Distribution Box For 400 Kva Dtr With 630 annual periodical maintenance Mccb 3P 36 Ka For Incomer & 200 annual periodical maintenance Mccb 3P 16 Ka 4 No.S For Outgoing Circuits , Lt Distribution Box For 400 Kva Dtr With 630 annual periodical maintenance Mccb 3P 36 Ka For Incomer & 200 annual periodical maintenance Mccb 3P 16 Ka 4 No.S For Outgoing Circuits , Temporary Lt Fuse Set For Distribution Transformers (Customised) As Per Kpdcl Drawing No. Ce/P&P/Drg/2023/Ltfs/001 (Enclosed) , 11Kv Polymeric Composite Disc Insulator 12Kv,Min Failing Load 45Kn, Lighting Impulse 75Kv Positive And 80Kv Negative, Creepage Distance 320Mm Nos , 11Kv Polymeric Composite Pin Insulator 12Kv, 5Kn, Lighting Impulse 75Kv Positive And 80Kv Negative, Creepage Distance 320Mm , 16 Kn Polymer Shackle Insulator , G.I Mukey For Shackle Insulators With Bolt Of (50X8)Mm , Gi U-Clamps For Shackle Insulator 50X8 Mm, (3.14 Kg/Mtr), 258 Mm , Gi U-Clamps For Shackle Insulator 50X8 Mm, (3.14 Kg/Mtr), 369 Mm , 11 Kv Link Set Heavy Duty With Copper Blade Size Of 14 Inch, 50 X 6 Mm, Female Contact Of Copper 6 Mm Thickness, With Post Insulator Of 10 Kn , 11 Kv Go, Ab Switch 3-Phase, 3-Pole,200 Amp, Vertical Type Set , 11 Kv Horn Gap Fuse Set 3 Phase 200A Set , Pg Clamps For 30 Mm² Acsr Conductor , Pg Clamps For 50 Mm² Acsr Conductor , Pg Clamps For 100 Mm² Acsr Conductor , Suspension/Tension Clamp With Eye Hook , Gi Pole Support Clamp Including Gi Nut And Bolts For 11 Mtr Pole With Size - 50X8x376 Mm , Gi Pole Support Clamp Including Gi Nut And Bolts For 9 Mtr Pole With Size - 50X8x376 Mm , Gi Pole Support Clamp Including Gi Nut And Bolts For 8 Mtr With Size 50X 8X 328 Mm , Gi Pole Support Clamp Including Gi Nut And Bolts For 8 Mtr Or 9 Mtr Plain Cement Concrete With Size 50X8x441mm , Cable Tie (Each Packet Contains 100 Nos.) , Cable End Caps , Insulating Piercing Connectors Of Sizes , 11 Kv Ipc (Insulation Piercing Conductors)For Bare To Cc(Covered Conductor) Connection , 11 Kv Ipc For Covered Conductor To Covered Conductor Connection , 33 Kv Tension Clamps With Bail And Ipc (Insulation Piercing Conductors) , 33 Kv Ipc (Insulation Piercing Conductors)For Bare To Cc(Covered Conductor) Connection , 33 Kv Ipc For cement concrete To cement concrete Connection , 33 Kv Ipc With Aluminium Bail For Earthing , Main Single Phase Service Distribution Box (Pole Db) Along With Mccb /Mcb As Per Rec Drawing. The Db Should Have Bottom Entery Of Cable With Proper Glands/Grommets-Safety Screws And Back Clamp Suitable For 11/9/8 Mtr St Pole Or 9/8 Mtr Plain Cement Concrete Poles With Nuts/Bolts , Main 3 Phase Distribution Box Ip 54 (Pole Db) Made From 20 Swg Crca Ms Sheet By Deep Drawn Method With Powder Coating. Internal Size Of The Box Shall Be 225Mm X 285Mm X 120Mm Used For Connection Through Abc Line And For Giving Connections To The Consumers 3Phase-1 Incoming 4 Outgoing I/C- 1, O/G-2-4 (200 A, 0.415 Kv) For Ryb Phase. The Db Should Have Bottom Entery Of Cable With Proper Glands/Grommets-Safety Screws And Back Clamp Suitable For 11/9/8 Mtr St Pole Or 9/8 Mtr Plain Cement Concrete Poles With Nuts/Bolts , Lt Line Spacers 3 P ,4 Wire , Lt Line Spacers 2 P ,3 Wire , Gapless Surge Arrestor,9 Kv ,10 Ka ,La With Polymer Housing, Stn. Type , 3-Ø, 4-Wire Trivector Meter (Prodigy ) With Suitable Ring Type Ct 200 annual periodical maintenance (Net Meter Enabled) , Single Phase Smart Energy Meter 5-30 Amp/ 10-60 Amp, Dlms Complaint Of Accuracy Class 1.0 , Three Phase Smart Energy Meter 20-80 Amp/, Dlms Complaint Of Accuracy Class 1.0 , Polypropylene Weather Proof Outdoor Type Meter Box For Single Phase Meter Along With Zinc Plated Clamps , Polypropylene Weather Proof Outdoor Type Meter Box For Three Phase Meter Along With Zinc Plated Clamps , Polypropylene Weather Proof Outdoor Type Meter Box For 4 Single Phase Meter Along With Zinc Plated Clamps , Gi Barbed Wire For Anti Climbing , Danger Plates With Clamps , Anti-Climbing Device With Clamps , Cemical Earthing Complete , Earthing Mat (Gi Flat 50 Mm X8 Mm)/(75 X10)Mm/(75X8)Mm , Gi Pipe 40 Mm 3 Mtr Long For Earthing , Earthing Electrode ( 3M Long) 20 Mm Dia. , Gi Strip 25X3 Mm , Galvanized Earthing Strips 50Mm X3mm. , Red Oxide , Aluminium Paint , Galvanized Nuts And Bolts , Galvanised Stay Set With 50X8mm Stay Clamp, Guy Insulator(2No..), Anchor Plate (200X 200 X 6 Mm), Nut-Bolts, 2 No. Turn-Buckles, 1.8M Long, 16 Mm Diameter Solid Gs Stay Rod & 7/3.15 Mm Dia Gi Stranded Wire Complete (11 Kv) , Galvanised Stay Set With 50X8mm Stay Clamp, Guy Insulator(2Nos.), Anchor Plate (300X 300 X 8 Mm), Nut-Bolts, 2 Nos Turn-Buckles, 1.8M Long, 16 Mm Diameter Solid Gs Stay Rod & 7/3.15 Mm Dia Gi Stranded Wire Complete (33 Kv) , Gi V Cross-Arm With Top Bracket Of Sizes , Gi Channel X-Arm And Braces Of Sizes , Gi Extension Riser Of Sizes , Gi Wire 6 Swg & 8 Swg , Guard Netting (For 52 Mtr Span) , Aluminium Jointing Sleeves 100 Sqmm , Aluminium Jointing Sleeves 50 Sqmm , Aluminium Jointing Sleeves 30 Sqmm , Suspension Fitting (2 Bolt) For 11 Kv Line , Tension Fitting (4 Bolt) For 11 Kv Line , Suspension/Tension Clamp With Eye Hook , Earth Wire 7/4 Sqmm , 1 Phase 2 Wire, 415V, 1Nos Of 100 Amps Incoming Sp Mccbs Fitted With Outgoing 04 No 32 Amps Sp Mcbs For Service Connections, Distribution Service Pillar Suitable For Outdoor Installation, Made Out Of Crca Sheet Painted Through 7-Tank Process With Pu Painted Busbars 2P, Aluminium With Heat Shrinkable Sleeves And Adequate Capacities Complete With All Accesories 4 Way Distribution Service Pillar. , 3 Phase, 415V, 1No Of 250 Amps Incoming 3 Tp Mccbs (Breaking 36Ka) Fitted Withoutgoing 03 No 100 Amps Sp Mccbs, 1No.100Amps 3 Pole Mccb For Outgoing Lt Cables, Distribution Feeder Pillar Suitable For Outdoor Installation , Made Out Of Crca Sheet Painted Through 7-Tank Process With Pu Painted Busbars 4P, Aluminium With Heat Shrinkable Sleeves And Adequate Capacities Complete With All Accesories 4 Way Distribution Feeder Pillar. , Fire Extingiusher Co₂ Type Of 4.5 Kg Capacity For Control Room , 3 Sand Bucket Fire Extingiusher , Gum Boots With Steel Toe Of Sizes , Winter Jacket- Coat Ecc Consists Of Three Independent Components That Is Wind Cheater ( Waterproof ), Insulating Layer And Waist Coat ( Sleeve Less ), Three Layer Waterproof Breathable Fabric, Dual Shade Og/ White, Material Of Insulating Layer- 1. Batting Polyester, 100 Gsm, 2. Fabric Nylon Knitted Aluminized, 3. Fabric Nylon 75 Gsm White, Material Of Waist Coat- Double Layer Bonded Polyester Fleece , Safety Vest - Reflective Luminous Garments - High Visibility Warning Garments With Synthetic Slide Fasteners, Fluorescent Yellow, Width Of Retro Reflective Material For All Types Of Garments (Minimum) 50 Millimeter , Non-Contact Voltage Detector, Upon Detection, Tip Glows And Beeper Sounds, Cat Iv 1000 V For Added Protection, Expanded Range: 90 V To 1000 V Ac Or 200 V To 1000 V Ac, Battery Cell Operated (2 Aaa Or Standard), Voltbeat Technology And Continuous Self-Test , Safety Helmet- Quality Of Shell High Quality, High Impact, Light Weight,Tough, Conformity To Specification- Is 2925:Latest ,En 397 Certified , Safety Rubber Gloves Up To 15 Kv As Per Iec Standard , Safety Belt/Harness With Shock Absorber , Safety Shoes Of Sizes -Personal Protective Equipment - Safety Footwear As Per Bis Specification No Is 15298 ( Part 2 ): 2016, Toe Cap- ( Steel ) Metallic, Insole, Classification- Class I ( Footwear Made From Leather And Other Materials, Excluding All-Rubber Or All-Polymeric Footwear ) With Different Sizes, Slip Resistant- As Per Clause 5.3.5.4 Of Is 15298 ( Part 2 )- Slip Resistance On Ceramic Tile Floor With Nals And On Steel Floor With Glycerine. , 11 Kv Earthing/Discharging Rod (Set Of 3 Rods) Set With Minimum 20 Sqmm Cable And U-Clamp , Battery Operated 12 Kv Voltage Detector (Cpri Tested) Complete Kit Including Hv Detector Probe, 20 Feet Frp Insulation Stick, Carrying Bag. The Detector Should Have Audio As Well As Visual Anunciation, Sensing Distance Of 1 Meter For 11Kv. Bright High Intensity Red Leds For Visual Annunciation Even In Unfavourable Daylight Conditions And A Buzzer To Produce Loud Beep Audible Even In Noisy Backgrounds , Alumunium Ladder 2*20 (Double Ladder) 3 Mm Thick Anti Corossion, Anodised, Bottom Rubber, Sliding Type With Rope And Pulley Arrangement , Alumunium Ladder 2*15 (Double Ladder) 3 Mm Thick Anti Corossion, Anodised, Bottom Rubber, Sliding Type With Rope And Pulley Arrangement , Aluminium Ladder 2*10 Ft Long, Anti Corossion, Anodised, Bottom Rubber, Sliding Type With Rope , Bamboo Ladder 18 Ft Long, Natural Bamboo Finish, Min Load Bearing Capacity Of 150 Kg , Bamboo Ladder 20 Ft Long, Natural Bamboo Finish, Min Load Bearing Capacity Of 150 Kg , Wart Free Budloo Wooden Ladder 17 Feet Long And Slightly Tappered Upwards The Steps Are To Be Fixed With Flat Galvinized Iron Strip With Galvinized Nails. The Foot Of The Ladder To Be Provided With Rubber Anti Skid Hold. , Wart Free Budloo Wooden Ladder 20 Feet Long And Slightly Tappered Upwards The Steps Are To Be Fixed With Flat Galvinized Iron Strip With Galvinized Nails. The Foot Of The Ladder To Be Provided With Rubber Anti Skid Hold. , Telescopic Ladder 20 Ft Long, 6063 T5 Grade Of Aluminium , 150 Kg Load Capacity, Self Locking Mechanism, Anti-Skid Foot Caps , Hand Held Search Light Led Lamp, 100 Watt With Lithium Ion 3.7 V, 3.5 Ah, 500 Lux/100 Mtr With Lamp Life -50000 Hours, Ip 65, 12 Months Warranty , Hdpe Pipe Outer Dia 180 Mm Inner Dia 152 Mm For Laying Of 11Kv Xlpe Cable From Power Transformer To Control Room , Mccb - 200 Amps,36Ka,4P Adjustable , Mccb - 40 Amps,36Ka,4P Adjustable , Mccb - 63 Amps,36Ka,4P Adjustable , Mccb - 100 Amps,36Ka,4P Adjustable , Mccb - 160 Amps,36Ka,4P Adjustable , Mccb - 250 Amps,36Ka,4P Adjustable , Mccb - 400 Amps,36Ka,4P Adjustable , Mccb - 630 Amps,36Ka,4P Adjustable , Mccb - 200 Amps,36Ka,3P Adjustable , Mccb - 100 Amps,36Ka,3P Adjustable , Mccb - 160 Amps,36Ka,3P Adjustable , Mccb - 250 Amps,36Ka,3P Adjustable , Mccb - 400 Amps,36Ka,3P Adjustable , Mccb - 630 Amps,36Ka,3P Adjustable , Bobin Insulators Clamps/Cliffs. , Epoxy Resin Cast Panel Insulators Upto 500Mm , 18 Feet Fiber Link Rod , 18 Feet Bamboo Link Rod , Al. Solderless Clamps Suitable For Transformer 1000 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 630 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 400/500 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 250 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 100 Kva As Per Relevant Is , Al. Solderless Clamps Suitable For Transformer 63 Kva As Per Relevant Is , Aluminium Thimbles 630 Mm2 As Per Relevant Is , Aluminium Thimbles 500 Mm2 As Per Relevant Is , Aluminium Thimbles 400 Mm2 As Per Relevant Is , Aluminium Thimbles 300 Mm2 As Per Relevant Is , Aluminium Thimbles 240 Mm2 As Per Relevant Is , Aluminium Thimbles 185 Mm2 As Per Relevant Is , Aluminium Thimbles 120 Mm2 As Per Relevant Is , Aluminium Thimbles 95 Mm2 As Per Relevant Is , Aluminium Thimbles 70 Mm2 As Per Relevant Is , Aluminium Thimbles 50 Mm2 As Per Relevant Is , Aluminium Thimbles 35 Mm2 As Per Relevant Is , Aluminium Thimbles 25 Mm2 As Per Relevant Is , Aluminium Thimbles 16 Mm2 As Per Relevant Is , Aluminium Thimbles 10 Mm2 As Per Relevant Is , Dpc Copper Winding Wire (Round) In Sizes 11 To 22 Swg Fresh. , Dcp Copper Strip Of Sizes For Lv Winding Of Distribution Transformers 250 Kva To 630 Kva Fresh. , Se Copper Winding Wire (Round) In Sizes 11 To 22 Swg. , Dpc Aluminium Winding Wire (Round) In Sizes From 12 To 20 Swg-Fresh , Dpc Aluminium Strip Of Sizes For Lv Winding Of Distribution Transformers 25 Kva To 630 Kva - Fresh , Se Aluminium Winding Wire (Round) In Sizes 12 To 20 Swg-Fresh , Dpc Copper Winding Wire (Round) In Sizes 12 To 20 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Dpc Copper Strip Of Sizes For Lv Winding Of Distribution Transformers 25 Kva To 630 Kva( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Se Copper Winding Wire (Round) In Sizes 11 To 22 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Dpc Aluminium Winding Wire (Round) In Sizes From 12 To 20 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Dpc Aluminium Strip Of Sizes For Lv Winding Of Distribution Transformers 25 Kva To 630 Kva ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Se Aluminium Winding Wire (Round) In Sizes 12 To 20 Swg ( In Exchange Of One Kg Of Scrap Of Salvaged Conductor) , Lv Brass Bush Rods 12 Mm , Lv Brass Bush Rods 19 Mm , Lv Brass Bush Rods 25 Mm , Lv Brass Bush Rods 32 Mm , Press Card Board Soft Calendared Solid 1Mm/2Mm/3Mm(As Per Sample) , Press Card Board Pre Compressed Solid 1Mm/2Mm/3Mm. , Ht Insulating Gum , Glass Wool Sleeves Of Sizes , Aluminium Brazing Rod (Standard Length) , Copper Brazing Rod (Standard Length) , Flexible Copper Strip (Shim) 75Mm X 0.5 Mm , Pvc Sheets 1 Mm Thick , Empire Tape 1 , Electrical Grade Kraft Paper, 4 Mil , Leatheroid Insulation Paper 20 Mil. , Hv Bushing , Lv Bushes Suitable For 63 To 100 Kva Dt , Lv Bushes Suitable For 200 To 250 Kva Dt , Lv Bushes Suitable For 400 To 630 Kva Dt , Epoxy Resin Cast 1.1 Kv Low Voltage Transformer Bushing With Busbar For 400/630 Kva Dt , Cotton Tape 1 (Size) 35 M Long. , Rubber Washers , Ht Paper , Cork Washer 12Mm Dia , Cork Washer20mm Dia , Cork Washer 25Mm/30Mm Dia , Plastic Metre Seals , Trifor (Tower Roller) , Transformer Oil Filitration Plant Filter Elements Of 1 Micron(60X250) Mm For Transformer Oil Filitration Plant , Heating Elements Of 2000 Watts For Transformer Oil Filtration Plant , Press Cardboard Cutter Having Bed=52X21 With Height Of Machine 45 With No. Of Tensile Springs 2 Nos. Complete In All Respects. , Angle Grinder, 800W Power, No-Load Speed Of 11000 Rpm, 100 Mm Disc , Welding Machine(Inverter Type) =5=10 Kva Rated Input Power, Maximum Welding Current At 60% Duty Cycle (In A) 150=250, Adjustable Hot Start,Anti-Stick Functions,Arc Force Control , Cordless Impact Drill/Drivers With 2 Batteries, Ideal For Driving Screws Into Wood And Drilling Into Masonry, Metal, And Wood , Pneumatic Air Impact Wrench With Sockets From 15 To 30 , Air Compressor 50 Ltr , Hand Held Brush Cutter , Hydraulic Crimping Tool , Pallet Truck 3 Ton , Hand Driven Insulation Resistance (Meggar) , Multimeter(Analog) , Multimeter(Digital) Voltage: Dc: 1000 Volts; Ac: 1000 Volts; Dc Accuracy: ± 0.5% + 3 Digit; Ac Accuracy: ± 1% + 3 Digit; Current: Dc: 10 Amps; Ac: 10 Amps; Dc Accuracy: ± 1.5% + 3 Digit; Ac Accuracy: ± 1.5% + 3 Digit; Resistance: 40 M Ohm; Resistance Accuracy: ± 1.5% + 3 Digit ; Capacitance: 1000 Μf; Capacitance Accuracy: ± 5% + 5 Digit Cat Iii 600 Volts Safety Rating , Pliers -Type Of Hand Tool-Combination Plier As Per Is 6149, Type Of Insulation-Rubber Insulation, Material-Carbon Steel , Nawara Tape 1 (Size) 35 M Long. , Rubberized Cork Sheet 4 Mm Thick 2Ftx3ft , Rubberized Cork Sheet 3Mm Thick 2Ftx3ft , Bakelite Tubes 12Mm Dia ( 1 Mtr Long) , Hv Bush Clamps (Ms) , Aluminium Clamping Member (Shoes) For Hv Bushing , Lv Cork Washers 12 Mm Dia , Lv Cork Washers 20Mm Dia , Lv Cork Washers 25 Mm/30 Mm Dia , Nuts & Bolts (M.S) Of Sizes. , M.S Flat Washers. , Hv Cork Washers 110 Mm O.D , Aluminium Welding Flux , Aluminium Flat 4/6/8/10 Mm Thick Of Required (Busbar) , Copper Flat 4/6/8/10 Mm Thick Of Required Width. (Busbar) , Ms Plug & Caps 1/2 ; 3/4; /1; 1.1/4; 1.1/2 , Oil Seal Rings (O-Rings) For Lv/Hv Bush Rods 12 Mm Dia. , Oil Seal Rings (O.Rings) For Lv/Hv Bush Rods 20 Mm Dia , Oil Seal Rings (O.Rings) For Lv/Hv Bush Rods 25 Mm Dia , Creep Tape 1 , Cotton Cloth , Empire Sleeves Of Sizes , Synthetic Enamel Paint Smoke Grey Colour , Paint Thinner , Steel Primer , Silica Gel , Transformer Oil As Per Is 335 And Amendments Thereof , Welding Rods 3.15 Mm/4Mm. (100 No. Per Packet) , Refilling Of Oxygen Gas For Brazing , Refilling Of Lpg Gas For Brazing , 12 Piece Tool Kit (1-Piece Screwdriver, 1-Piece Hammer, 7-Pieces Screwdriver Bits, 1-Piece Plier, 1-Piece Wrench(Adjustib And 1-Piece Measuring Tape) Bosch/Dewalt/Taparia , Clamp Meter, Conforms To Iec 61010, Cat Ii 600V Safety Rated, 600A Ac Current Measurement, Ac/Dc Voltage, Resistance, Continuity & Data Hold Function, 2 Years Manufacturer Warranty [Fluke/Digi Sense/ Motwane/Extech] , 12 Volts, 42 Ah Lead Acid Battery , 12V 7 Ah Rechargeable Sealed Maintenance Free Battery (Smf) For Ups , Battery Connector For 12 V Battery Bank (12 No. Both Ends Of Each Connector Should Be Properly Clamped With Nuts, Bolts, Washers) , Fabricated Gi Pollar Collar 50X6 Mm With Nuts And Bolts , Digital Weighing Scale Upto 1 Ton , Portable Professional Petrol Chainsaw,18 Inch Or Above, 2 Kw Or Above, Pitch Of 3/8 Or Above, Petrol Capacity 400 Ml Or Above. , Double Ply Polyester Webbing Slings, Load Capacity 6 Tonne , Dee Shackles Forged Shackles, Working Load 6.5 Tonne , Eyebolt With Recessed Collar With Maximum Axial Lifting Capacity Of 6 Tonne , Handheld Brush Cutter / Line Trimmer, With Nylon Feed Head Attachment Petrol Engine Low Vibration Centrifugal Clutch, Hardened Steel 2 Teeth Blade, Bump / Tap & Go Type, Shaft Length (Mm) 1425 To 1449, Circular Saw Attachment Inclusive In The Scope Of Supply , Portable Hydraulic Crimping Tool For 30 Sqmm To 400 Sqmm With All Attachments , Pre Fabricate Galvanized Single Way Top Bracket (1000 Mm Long With 48.3 Od Gi Pipe) To Be Fitted On Top Of Octogonal Pole For Holding Lighting Luminaries. , Dk Thermoplastic Cable Junction/ Termination T Boxes 8X10Of Class Ip55/Ip65 Fitted With Two 2-5 annual periodical maintenance Mcb Strip,4-Way Terminal Block / Connectors Incl. Copper Lugs, Clamps ,Nut & Bolts Washers Etc (Hansel Or Equivalent Make) Or Poles With Two Way Type Bracket To Be Fitted Properly Inside The Door Opened Gear Box Provided On Thebottom Side Of The Pole. , Surge Protector For The 120/190 Watt Led Type Lighting Fixture Complete. , Outdoor Type Lt Control Panel Size 900Mmx900mmx450mm Having Input Main Control Of 100 annual periodical maintenance Mccb With Tpn Bus Bar With 40 annual periodical maintenance Tpn Mcb 4Nos For Outgoing Circuits,Including Astronomical Switching With Contactor Of Required Capacity. The Panel Should Be Fitted With A Digital Composite Voltmeter/Ampermeter/Indicator Set With Selecter Switch And Backup Protection System, Thimbling And The Panel Shall Further Be Provided With Proper Openings On Front Side As Well As On Rear Side Including Its Locking Arrangement And Also With Required Glands And 4No. Angle Iron Legs For Grouting The Panel On Bed , The Panel Shall Also Be Provided With Powder Coat/Pu Paint. The Item Includes Its Thimble As Required At Taping Point For Incomming , Out Going And Internal Panel Wiring Complete Unit. , Dust/Rain/Snow-Proof Canopy Type Mini-Outdoor Lt Feeder Panel Of Size 450X300mm With Front Door Opening Duly Powdered Colour Coated With Inbuilt 2No Tpn 16-32 annual periodical maintenance Mccb,Tpn Busbars Of Same Capacity Installed On Cement Concrete Block With 4 Angle Iron Legs Grouted In The Cement Concrete Of Termination Of Main 25Sqmm Cable And Outgoing 25/16 Sqmm Cable Circuits. , 120 Watt Led Luminaries Of Ip 67 Protection. , 190 Watt Led Luminaries Of Ip 67 Protection. , 110 W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 70W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 50 W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 30W Led Light Fitting With /= 100 Lm/Watt Efficacy Ip 67 Ingress Protection (Ip Rating) As Per Is:10322 (Part 1):1982 Latest, 90 To 300 Volts Ac At 50 Hz+/-2 Input Voltage Range, 230 V Ac 50 Hz Rated Voltage, Poly Carbonate Lense, Smd Led Chip As Per Lm 80/Is16106, Ip 66 Protection Of The Entire Housing (Both Led Section And Driver Section) As Per Is:10322 (Part 1):1982 Latest , 6 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 1Pole With 1Pp, 240 V , 10 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range B, 1Pole With 1Pp, 240 V , 10 A Dp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 2 Pole With 2 Pp, 240 V , 16 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 1Pole With 1Pp, 240 V , 16 A Spn Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 2Pole With 1Pp, 415 V , 16 A Tp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 3Pole With 3Pp, 415 V , 32 A Tpn Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 4 Pole With 3 Pp, 415 V , 32 A Tp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 3 Pole With 3 Pp, 415 V , 32 A Dp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 2 Pole With 2 Pp, 415 V , 32 A Sp Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range B, 1 Pole With 1 Pp, 415 V , 63 A Tpn Mcb, 10 Ka Rated Short Circuit Capacity (Ampere), Instantaneous Tripping Range C, 4 Pole With 3 Pp, 415 V , Astronomical Timer For Street Light Control, 3 Phase, 18 Kw/43 A Each Phase, Ip 66, Manually Settable Timer With 12 Programmes Spreaded Over A Year As Defined Programme, 260 Volt +/- 5 Volt Over Voltage Protection Per Phase, 160 Volt +/- 5 Volt Under Voltage Protection Per Phase, Operating Temperature Range -10 To +50 Deg C, /=60 Seconds On/Off Timing Accuracy , Embossing Punch Die Tool For Dt Coding (A-Z And 0-9) , Battery Operated Engraving Machine , Hand Operated Oil Pump/Barrel Pump , Manilla Rope - 25 Mm , Nylon Rope- 20 Mm , 11Kv Pilfer Resistant Metering Cubicle For 3Phase 4 Wire Metering System Made Of Ms Sheet Steel Thickness Not Less Than 2Mm Duly Power Coat Painted Suitable For Indoor As Well As Outdoor As Per The Site Requirement. The Cubicle Shall Be Painted Through 7-Tank Process. The External Dimensions Should Be Adequate. Panel Having Two Compartments Upper Meter Compartment And Lower Ct/Pt Compartment. Provided With Synthetic Or Semi Synthetic Gasket Firmly Glued To The Sufrace, Dust, Weather And Vermin Proof And Shall Comply Degree Of Protection Ip 65 Both The Chambers Having One Sided Hinged Door Arrangments. The Metering Panel Shall Be Provided With Two No Ms Channels Of Size 100 X 50 Mm On The Front And Rear Sides Duly Welded And 4 No Of Lifting Hooks. It Should Be Possible To Take Meter Reading Manually, Through Cmri And Computer Without Opening The Lv Chamber Door. , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 2.5 /5 For 25Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 5/5 For 63Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 7.5/5 For 100Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 15/5 For 200Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 20/5 For 250Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 25/5 For 400 Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 50/5 For 630 Kva Dt , Single Phase, Single Core, Single Ratio, Epoxy Resin Cast Current Transformers Suitable For 11Kv, Copper Wound Primary Type With Rated Burden 5Va And Accuracy Class 0.5 Or Better And Conforming To Is2705 (Part-I & Ii) Amended Upto Date. Isf Shall Be Upto 5The Ct Ratio Shall Be 75/5 For 1 Mva Dt , 11Kv/ 110 V, Three Phase Epoxy Resin Cast Pt With Rated Burden 15Va Per Phase And Accuracy Class 0.5 Or Better And Conforming To Is:3156 (Part-I&Ii) Amended Upto Date With Proper Colour Coded Identification. Pts Shall Be Of Uniform Insulating And Withstand Separate Source 23Kv providing fixing For One Minute. , 3Ph, 3 Wire Ht Ct/Pt Operated Fully Static Smart Tri-Vector Energymeters Dlms Compliantcategory C With Rs232 Port For Modem Compatibility. 11Kv/110V, Ph-Ph (3P,3W) Metersfor Measurement Of Different Electrical Parameters Including Active Energy (Kwh/ Mwh), Reactive Energy (Kvarh/Mvarh), Apparent Energy (Kvah/ Mvah) Etc. (Make L&T, Secure,Abb) , Led String Light 15 Mtr Long Of Different Colours (Saffron/White/Green) With Controller. , 4 Socket Extension Boards With Each Compatible Sockets Of 16 annual periodical maintenance And 5 Mtr Long Cable And Plug Along Surge Protector And On/Off Controller.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Jammu And Kashmir View Result →
24.
Power #11108394 Price Bid
Tender For Estimate For Conductor Aug. Work At 33 Kv Godrej Feeder Originated From 132 Kv Ehv S/S Mandideep - WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 2 H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-15 mtr. Long =565.5 kg 3 ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) 4 M S Channel 75X40x6 mm 5 M S Channel 100X50x6 mm 6 33 KV Pin Insulator Polymer Composite (10 KN) 7 33 KV (45KN) Composite Polymer Disc Insulators 8 33 KV Strain hardware (T&C type) fittings 9 Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP 10 Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 5 ft(1.5 mtr) centre DP 11 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 12 MS strain plate 65x8mm 250mm long 13 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 14 Red oxide paint 15 Aluminium paint 16 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 17 M.S.Nuts with Bolts 18 Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor 19 Aluminium Binding wire and tape 20 Danger Boards Enamelled 33 KV 21 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 22 Stay set 20 mm. complete without Stay wire (Painted) 23 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 24 Concreting of structures & foundation (1:3:6) 25 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor 26 Single Suspension Strain Set for ACSR Panther Conductor 27 Stone Block/Pre cast block for base pedding(450X450X75MM) 28 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 29 Dismentelling 30 Additional Erection Charge 31 IRON STEEL SCRAP (Return Material Side to Area store Bhopal) 32 CONDUCTOR ACSR SCRAP(Return Material Side to Area store Bhopal) 33 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 34 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
25.
Tourism #11085444 Technical Bid
Tender For Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer. , Supplying And Filling Moorum In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry In Cement Mortar 1:3 (1Cement : 3 Coarse Sand) With Bricks Of Class Designation 75 Kg /Cm2. B. Upto Floor V Level. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs, Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Extra To Be Added For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De- Shuttering And De-Centering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1M Or Part Thereof. (Plan Area To Be Measured) Suspended Floors, Roofs, Landings, Beams And Balconies (Plan Area To Be Measured) , Providing Tmt Steel Reinforcement Bars Of Sail, Tata, Vizag Made Only (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. Minimum Grade Of Steel - Fe 500 , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4B Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint.In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories (Tata Make) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. , Providing & Fixing In Position Galvalume/Zincalume Flashings, Cappings, Ridges, Gutters Upto 600Mm/610Mm Girth And Min 3.00M In Length (Cold Rolled Steel 550 Mpa Yeild Stress Astm A 446 Grade E) With Hot-Dip Metallic Coating Of Aluminium-Zinc Alloy(Az 150 Galvalume) (150 Gms/Sqm Total Of Both Sides With Al-Zn Composition= 55% & 43.5% Resp. & 1.5% Si Conforming To Astm 792/ As 1397) 0.45 Mm Base Metal Thickness And 0.50Mm Total Coated Thickness, Factory Cut At All Heights For Roof, Side & Gable Cladding Complete In All Respects With Az 150 Gsm Smp Color Coated (20Mic Exterior Coat Of Silicon Modified Polyester Paint System Over 5 Mic Primer And 5 Mic Polyester Back Coat Over 5 Mic Primer) Incl. Fixing To Purlins With No 12X14X55Mm Mechanically Galvanised Hex Head Self Drilling Screws Of The Best Quality As Per As-3566 Class 3-4 Approved, Which Should Be Compatible To Be Used With Sheets. With Integral Washers And Epdm Seals Etc. Silicon Sealant Non-Hardening Neutral Cure Type Shall Be Applied At All End Laps, Complete As Directed. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. Plain Grill , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excludingfixingaccessoriessuchasnuts,Bolts, Fasteners Etc.). , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. Light Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Jet Black With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. ( Price Range 2000 To 2100 Rs Per Sq Mtr.) , Providing And Fixing Granite Stone Slabs (Mirror Polished) 18Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On Cement Paste And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. Jet Black , Providing And Laying Polished Granite Stone Flooring, Coping In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building, All Complete As Per The Architectural Drawings, With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade, Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. ( Price Range 1550 To 1600 Rs Per Sq Mtr.) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm .80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Fixing 18Mm Thick Polished Black Granite Machine Cut For Kitchen Platforms, Counters, Window Sills, Door Frame, Urinal Partitions , Fascia And Similar Locations Of Required Size Of Approved Shade, Colour And Texture Laid Over 20Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing,Moulding And Polishing To Edge To Give High Gloss Finish, Etc. Complete At All Levels.( Price Range Rs.1500 To Rs.1700 Per. Sq.M ) , Providing 25Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 60 Cm L X45 Cm H X 15 Cm T , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand). 20 Mm Thick. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 (1 Cement: 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , 12 Mm Thick Cement Plaster 1:4 (1 Cement:4 Fine Sand) , 6Mm Thick Cement Plaster To Ceiling With 1:3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer , Extra For Plastering Done On Moldings, Cornices, Or Arch It Raves Including Neat Finish To Line And Level. In One Coat , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws , Plugs And Priming Coat On Unexposed Surfaces Etc. 50X12Mm Size. , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 300X 16 X 5 Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Provided And Fixing 150 Mm Chromium Plated Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutters Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete. 200 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And Fixing Of Aluminium Window With 3 Tracks And 2 Shutters Sliding Window With Tobular Frame Ployster Powder If Thicness 75-80 Microns With Approved Standard Accessaries Such As Ball Beaing Rollers, Concealed Lock, 6Mm Thick Plain Clear Glass With Epdm Beading Etc. , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete. 10 Mm Dia , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete.12 Mm Dia , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead Extra For Dismantling Trusses, Rafters, Purlins Etc. Of Steel Work, For Every Additional Span Of One Meter Or Part Thereof Beyond 10 Mts. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Doors, Windows And Clearestory Windows (Steel Or Wood) Shutters Including Chowkhats Architrave Holdfast Etc. Complete And Staking Within 50 Mt. Lead. Of Area 3 Sq.M. And Below , Dismantling Wood Work Of Area Below 40 Sq.Cm. Wrought Framed And Fixed In Frames, Other Frames And Trusses Including Stacking Of Material Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Main Entrance Gate In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Mahadev Big Mural In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Nandi In Frp As Per Tender Drawing , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Laying 300X350X160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete) , Supplying And Stacking Of Good Earth ( Garden Soil) At Site Including Royalty And Carriage Upto 1 Km. (Earth Measured In Stacks Will Be Reduced By 20% For Payment). , Spreading Of Sludge, Dung Manure Or/And Good Earth (Garden Soil) In Required Thickness (Cost Of Sludge, Dung Manure Or/And Good Earth To Be Paid Separately). , Supply At Site Of Work/Store Deoiled Neem Cake Duly Packed In Used Gunny Bags As Per Mort & H Specification 308.2 , Supplying Of Sludge Duly Stacked At Site/Store As Per Mort & H Specification 308.2 , Filling Mixture Of Earth & Sludge Or Manure In The Desired Proportion In Trenches Flooding With Water And Leveling (Cost Of Supplying Earth And Sludge Or Manure And Mixing Excluded). , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Rubra , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Saraca Ashoka , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neem , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Nyctanthes , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Peltophorum Pterocarpum , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Bauhinia Purpurea , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Filliciam Decipiens , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cordia Dichotoma , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cassia Fistula , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Millingtonia Hortensis , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Jacaranda Mimosifolia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neolamarckia Cadamba , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Thevetia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Michelia Champaca , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Alba , Supplying & Planting Shrubs, Creepers, Ground Covers, As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. , Providing And Fixing White Vitreous China Type Water Closet Squatting Pan (European Type W.C. Pan) With Dual Flushing (Citren Nelson/ Similar)With Stop Cock Wall Flanges Flush Pipe Or Elbow And Vacuum Breaker Coupling Etc. Including Cutting Making Good The Walls And Floors Where Required. (Excluding Handicap Toilets) , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430 X 260 X 350 Mm And 340 X 430 X 265 Mm Sizes Respectively With Pvc Automatic Flushing Cistern With Fittings, R.S. Or C.I. Brackets, Standard Size Galvanized Steel Flush Pipe And Spreaders With Brass Unions & G.I. Clamps Complete, Including Painting Of Cistern And Fittings, Cutting And Making Good The Walls And Floors Where Required. (A)One Urinal Basin With 5 Liters P .V .C. Automatic Flushing Cistern. , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Including Cutting And Making Good The Walls Where Required. Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws. Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Wall Mixer With 3 In 1 System With 115Mm Long Bend Pipe For Connection To Over Head Shower Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing C.P. Brass Towel Rail Complete With C.P. Brass Brackets Fixed To Wooden Cleats With C. P. Brass Screws. 750X20 , Providing & Fixing Soap Dish Chromium Plated With Brackets Fixed To Wooden Cleats With Cp Brass Screw , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed .110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed. 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating.110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door :110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door :110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door 110Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door . 75Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Providing And Fixing R.P.V.C. Vent Cowl: 75Mm , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Cm2 In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar. , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:.B) 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 32Mm Outer Dia. , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 15Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 40 Mm Nominal Bore . , Providing And Fixing Non-Return Valve Of Approved Quality :40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality .25 Mm Nominal Bore , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 25 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 32 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 40 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 50 Mm , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701;1996. 1000 Lit. Capacity , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Of Concealed Type Step Light With 6W Led Lamp Die-Cast Aluminium Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs. At L70B50, Including Driver By Making Necessary Arrangement/Recess In Wall To Make It Flush With Surface ,Ip Rating : Ip 67 ,Ik10 Rated , Connecting Wire, Including Gear Box And Junction Box For Cable Connection Complete And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Wall Mounted Street Light Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length Complete. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Thd0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-15 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -6 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And 3 Phase Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (B) 10 To 40 A , Supply, Installation, Testing And Commissioning Of 3 Kva 1 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (C) 6 Way (8+18), Double Door, Horizontal Type Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. (E) Tpn, Cat A , Supplying And Fixing Following Rating Four Pole (Triple Pole And Neutral) 415 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm(Ground To Db) , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (C) 6 Module (200Mm X 75 Mm) Cat A , Supplying & Erecting Of Led 9 To 10W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying And Erecting Outdoor Square / Circular Max. 20 W Pendent Light With Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 2000 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd10%, P.F. 0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50 Including Driver, Having Mounting Arrangement With Board For Surface Type Or Suspended Accessories Complete. , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supply And Erecting Fan Hook Box ( 100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Gi Pipe Medium Class 25 Mm (Civil Gsr 1034 (F)(Iii))
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Goa View Result →
26.
Power #11055295 Price Bid
Tender For Estimate For Providing Lilo Arrangement At 33/11 Kv S/S Parwaliya Sadak Under Parwaliya Sadak D/C - WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 2 IRON STEEL SCRAP 3 ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) 4 (v) ACSR Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.), (6/4.72 + 7/1.57 mm) 5 Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) 6 Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) 7 Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) 8 33 KV CT Outdoor Oil immersed type, 3 Core, 200-100/5-5-1 Amp, Class 0.5 for differential protection 9 33 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel 10 33 KV control & relay panel with numerical static relay for Feeder protection 11 33 KV, ISOLATOR 600 AMP.(Turn and twist type) 12 M S Channel 100X50x6 mm 13 33 KV Pin Insulator Polymer Composite (10 KN) 14 33 KV (45KN) Composite Polymer Disc Insulators 15 33 KV Strain hardware (T&C type) fittings 16 33 KV Polymer Lightening arrestor Gapless type 17 M.S.Flat 50x6 mm 18 Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 5 ft(1.5 mtr) centre DP 19 Red oxide paint 20 Aluminium paint 21 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 22 M.S.Nuts with Bolts 23 MS strain plate 65x8mm 250mm long 24 Stay Wire 7/3.15 mm.(7/10 SWG) 25 Stay set 20 mm. complete without Stay wire (Painted) 26 Danger Boards Enamelled 33 KV 27 Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth 28 Concreting of structures & foundation (1:3:6) 29 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor 30 Marshelling box with 10 no. connectors 31 T -clamps for Panther 32 Stone Block/Pre cast block for base pedding(450X450X75MM) 33 G.I.Pipe 40 mm Dia C grade type 34 G.I. STRIP 25X3 MM1 35 Bentonite compound powder 36 Galvanized nut & bolt with washer 37 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 38 Erection of Plinth per VCB- 33KV or 11KV 39 Stringing of Each 33 KV Bus- upper and lower including drop jumpering, jointing with clamps, incoming DP/ ME to BUS 40 Additional Erection Charge 1 41 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 42 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Madhya Pradesh View Result →
27.
Water Resources and Irrigation #11029676 AOC
Tender for R & M Of Tubewells In Various Blocks Of District Ludhiana , Rewinding Of Submersible Motor Pump Set Of 15 Hp Including Suplly Of Finolex/Isi Marked Rewinding Wire, Gm Moter Bush, Rotor Sleeve, Ci Bowl, Wooden Sticks, Gm Neckring And Rotor Grinding Polishing And Balancing Including Cost Of Other miscellaneous Items And Labour After Deduction Scrap Value Of Material , Rewinding Of Submersible Motor Pump Set Of 25 Hp Including Suplly Of Finolex/Isi Marked Rewinding Wire, Gm Moter Bush, Rotor Sleeve, Ci Bowl, Wooden Sticks, Gm Neckring And Rotor Grinding Polishing And Balancing Including Cost Of Other miscellaneous Items And Labour After Deduction Scrap Value Of Material , Earth Work Excavation For Pipe Line In Trenches And Pits Up To 1.5 Meters Depth In Open Area Where Disposal Of Surplus Earth Is Done Alongwith Alignment, Including Trimming And Dressing Sides, Levelling Of Beds Of Trenches To Correct Grade, Cutting Joint Holes, Refilling; Consolidation And Watering Of Refill In 15Cm Layers And Restoration Of Unmetalled Or Unpaved Surface To Its Original Condition Excluding Cost Of Shoring And Timbering But Including The Cost Of Dewatering Of Rain Water, Diversion For Traffic, Night Signals, Providing & Fixing Caution Boards, Watching, Fencing Etc. Upto 1.5 Mtr Depth , Earth Work Excavation For Pipe Line In Trenches And Pits Up To 1.5 Meters Depth In Open Area Where Disposal Of Surplus Earth Is Done Alongwith Alignment, Including Trimming And Dressing Sides, Levelling Of Beds Of Trenches To Correct Grade, Cutting Joint Holes, Refilling; Consolidation And Watering Of Refill In 15Cm Layers And Restoration Of Unmetalled Or Unpaved Surface To Its Original Condition Excluding Cost Of Shoring And Timbering But Including The Cost Of Dewatering Of Rain Water, Diversion For Traffic, Night Signals, Providing & Fixing Caution Boards, Watching, Fencing Etc. From 1.5 To 2.25 Mtr Depth , Earth Work In Excavation In Foundations Trenches Etc. In All Kinds Of Soil Where Pick-Jumper Work Is Not Involved And Not Exceeding 2.0 Metres Depth Including Dressing Of Bottom And Sides Of Trenches, Stacking The Excavated Soil Clear From The Edge Of Excavation And Subsequent Filling Around Masonry In 15 Cm, Layers With Compaction Including Disposal Of All Surplus Soil As Directed Within Lead Of 30 Metres. , First Class Brick Masonary 229 Mm Thick Laid In Cement Sand Mortar 1.6 In Foundation And Plinth Including Supply Recarriage Of Bricks Cement . , 10Mm Thick Cement Plaster 1.4 On Sides Walls (-) Rs.1.25/- For Scaffolding. , 10Mm Thick Cement Plaster 1:4 On Bed And Top. , Reinforced Cement Concrete 1:2:4 Hand Mixed But Including Steel Reinforcement , Cement Conc.1:2:4 Including Supply, Carriage & With Stone Ballast Or Shingle , Cement Concrete 1:4:8 With Brick Ballast 40Mm Gauge , Lowering, Jointing And Cutting Of Reinforced Cement Concrete Np-2 Plain End Pipes 400Mm Dia With Reinforced Cement Concrete Collars And Laying Same To Correct Gradient And Alignment And Jointing Ends And Fixing Collars With Cement Mortar 1:2 As Per Is 458:2003 In All Depths Complete In All Respect , Lowering, Jointing And Cutting Of Reinforced Cement Concrete Np-2 Plain End Pipes 150 Mm Dia For Vent Pipe Into Trenches And Laying Same To Correct Alignment As Per Is 458:2003( @2.5 Metre / No) , Wrought Iron And Mild Steel Ladders, Framed Grills, Grating Etc. Complete Fixed In Position In D-Tank. , Providing & Fixing M.S. Foot Rests Made Of 23X25 Mm Square Bar Including Fixing In Manholes Complete With Cement Concrete 1:2:4 , Providing And Fixing Of Alfa Valve 400M Fitted On Riser Pipe To Act As Nakka (D-Regulators) , Centreing &Shuttering For Concerte Faces , Providing & Fixing Of Steel Shutter Gates Assembly In Main Pipeline Complete In All Respect (400 Mm Dia) , Dismentling Of Brick Work In Cement
Contract Date: May 13, 2026 Contract Value : ₹ 27.12 Lakh
Government Departments No of Bidders 2
Punjab View Result →
28.
Housing Urban and Rular Development #10958222 Technical Bid
Tender for Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. , Taking Out Doors, Windows And Clerestory Window Shutters (Steel Or Wood) Including Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles 10 Mm To 25 Mm , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of: G.S. Sheet , Dismantling Cement Asbestos Or Other Hard Board Ceiling Or Partition Walls Including Stacking Of Serviceable Materials And Disposal Of Unserviceable Materials Within 50 Metres Lead. , Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials Including Malba All Complete As Per Directions Of Engineer-In-Charge. , Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineerin-Charge. , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar , Providing And Fixing Partition Upto Ceiling Height Consisting Of G.I. Frame And Required Board, Including Providing And Fixing Of Frame Work Made Of Special Section Power Pressed! Roll Form G.I. Sheet With Zinc Coating Of 120 Gms/Sgm(Both Side Inclusive), Consisting Of Floor And Ceiling Channel 50 To Mm Wide Having Equal Flanges Of 32 Mm And 0.50 Mm Thick, Fixed The Floor And Ceiling At The Spacing Of 610 Mm Centre To Centre With Dash Fastener Of 12.5 Mm Dia Meter 50 Mm Length Or Suitable Anchor Fastener Or Metal Screws With Nylon Plugs And The Studs 48 Mm Wide Having One Flange Of 34 Mm And Other Flange 36 Mm And 0.50 Mm Thick Fixed Vertically Within Flanges Of Floor And Ceiling Channel And Placed At A Spacing Of 610 Mm Centre To Centre By 6 Mm Dia Bolts And Nuts, Including Fixing Of Studs Along Both Ends Of Partition Fixed Flush To Wall With Suitable Anchor Fastener Or Metal Screws With Nylon Plugs At Spacing Of 450 Mm Centre To Centre, And Fixing Of Boards To Both Side Of Frame Work By 25 Mm Long Dry Wall Screws On Studs, Floor And Ceiling Channels At The Spacing Of 300 Mm Centre To Centre. The Boards Are To Be Fixed To The Frame Work With Joints Staggered To Avoid Through Cracks, M.S. Fixing Channel Of 99 Mm Width (0.9 Mm Thick Having Two Flanges Of 9.5 Mm Each) To Be Provided At The Horizontal Joints Of Two Boards, Fixed To The Studs Using Metal To Metal Flat Head Screws, Including Jointing And Finishing To A Flush Finish With Recommended Jointing Compound, Jointing Tape, Angle Beads At Corners (25 Mm X 25 Mm X0.5 Mm), Joint Finisher And Two Coats Of Primer Suitable For Board As Per ManufactureS Specification And Direction Of Engineer In Charge All Complete. A)75 Mm Overall Thickness Partition With 12.5 Mm Thick Double Skin Fire Rated Glass Board Reinforced Gypsum (Grg) Plaster Conforming To Is: 2095: Part 3 (Board With Bis Certification Marks) , Mirror Polishing On Marble Work/Granite Work/Stone Work Where Ever Required To Give High Gloss Finish Complete. , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part 1) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : I) 250X16 Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : A) 200X10 Mm , Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To 1S:4992 With Necessary Screws Etc. Complete (Copper Oxidised As Per Is 1378): 125 Mm , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete. Twin Rubber Stopper , Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Si, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings And Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Dia Pipes , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: I) Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6 (1 Cement: 6 Coarse Sand) , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Finishing Walls With Textured Exterior Paint Of Required Shade : A) New Work (Two Or More Coats Applied @ 3.28 Ltr/10 Sqm) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg/10 Sqm , Providing And Laying Vitrified Tiles In Floor In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To 1S:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily. Glazed Vitrified Tiles Matt/Antiskid Finish Of Size Size Of Tile 600 X 600 Mm , Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix Of 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg), Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 600X600 Mm , Providing And Fixing False Ceiling At All Heights Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25 Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Also Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per ManufacturerS Specification And Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All In Complete As Per Drawings, Specification And Direction Of The Engineer Charge But Excluding The Costof Painting With : A) 12.5 Mm Thick Tapered Edge Gypsum Moisture Resistant Board , Providing And Fixing 15 Mm Thick Densified Tegular Edged Eco Friendly Light Weight Calcium Silicate False Ceiling Tiles Of Approved Texture Of Size 595 X 595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanised Steel Sections (Galvanising @ 120 Grams Per Sqm Including Both Side) Consisting Of Main ‘T Runner Suitably Spaced At Joints To Get Required Length And Of Size 24X38 Mm Made From 0.33 Mm Thick (Minimum) Sheet, Spaced 1200 Mm Centre To Centre, And Cross T Of Size 24X28 Mm Made Out Of 0.33 Mm (Minimum) Sheet, 1200 Mm Long Spaced Between Maintenance At 600 Mm Centre To Centre To Form A Grid Of 1200X600 Mm And Secondary Cross ‘T Of Length 600 Mm And Size 24 X28 Mm Made Of 0.33 Mm Thick (Minimum) Sheet To Be Inter Locked At Middle Of The 1200X 600 Mm Panel To From Grid Of Size 600X600 Mm, Resting On Periphery Walls Partitions On A Perimeter Wall Angle Pre-Coated Steel Of Size (24X24x3000 Mm Made Of 0.40 Mm Thick (Minimum) Sheet With The Help Of Rawl Plugs At 450 Mm Centre To Centre With 25 Mm Long Dry Wall Screws @ 230 Mm Interval And Laying 15 Mm Thick Densified Edges Calicum Silicate Ceiling Tiles Of Approved Texture In The Grid, Including, Cutting/ Making Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc., Wherever Required. Main ‘T Runners To Be Suspended From Ceiling Using G.I. Slotted Cleats Of Size 25X35x1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm G.|. Adjustable Rods With Galvanised Steel Level Clips Of Size 85 X 30 X 0.8 Mm, Spaced At 1200 Mm Centre To Centre Along Main ‘T. Bottom Exposed With 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyster Baked Paint, For All Heights, As Per Specifications, Drawings And As Directed By Engineer-In-Charge. Note :- Only Calcium Silicate False Ceiling Area Will Be Measured From Wall To Wall. No Deduction Shall Be Made For Exposed Frames/Opening (Cut Outs) Having Area Less Than 0.30 Sqm.The Calcium Silicate Ceiling Tile Shall Have Nrc Value Of 0.50 (Minimum), Light Reflection 85%, Non- Combustible As Per B.S. 476 Part Iv, 100% Humidity Resistance And Also Having Thermal Conductivity 0.043 W/Mk. , Providing And Fixing In Wall Lining Wpc Louvers With Approved Colour And Texture Including Priming Coat On Unexposed Arrangement And Screws Etc. Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing Zebra Vertical Roller Blinds Over The Existing Windows Of Approved Colour And Quality Or Design Etc. Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Fixing White Vitreous China Extended Wall Mounting Water Closet Of Size 780X370x690 Mm Of Approved Shape Including Providing & Fixing White Vitreous China Cistern With Dual Flush Fitting, Of Flushing Capacity 3 Litre/ 6 Litre (Adjustable To 4 Litre/ 8 Litres), Including Seat Cover, And Cistern Fittings, Nuts, Bolts And Gasket Etc Complete. , Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To Eureopean Type W.C. Of Quality And Make As Approved By Engineer - In - Charge. , Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Wash Basin Size 630X450 Mm With A Single 15 Mm C.P. Brass Pillar Taps , Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Providing And Fixing Toilet Paper Holder : A) C.P. Brass , Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete: 25 Mm Nominal Bore. , Providing And Fixing Ppr Unions Ppr Union 25Mm. , Making Connection Of Drain Or Sewer Line With Existing Manhole Including Breaking Into And Making Good The Walls, Floors With Cement Concrete 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Cement Plastered On Both Sides With Cement Mortar 1:3 (1Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement And Making Necessary Channels For The Drain Etc. Complete : For Pipes 100 To 250 Mm Diameter , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Excavating Holes More Than 0.10 Cum & Upto 0.5 Cum Including Getting Out The Excavated Soil, Then Returning The Soil As Required In Layers Not Exceeding 20Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering Etc, Disposing Of Surplus Excavated Soil, As Directed Within A Lead Of 50 M And Lift Upto 1.5 M. All Kinds Of Soil , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Lll) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Providing & Fixing Uv Stabilised Fiberglass Reinforced Plastic Sheet Roofing Up To Any Pitch, Including Fixing With Polymer Coated ‘J Or ‘L Hooks, Bolts & Of Nuts 8 Mm Dia. G.I Plain/Bitumen Washers Complete But Excluding The Cost Of Purlins, Rafters, Trusses Etc. The Sheets Shall Be Manufactured Out 2400 Tex Panel Rovigs Incorporating Minimum 0.3% Ultra-Violet Stabiliser In Resin System Under Approximately 2400 Psi And Hot Cured. They Shall Be Of Uniform Pigmentation And Thickness Without Air Pockets And Shall Conform To Is 10192 And Is 12866.The Sheets Shall Be Opaque Or Translucent, Clear Or Pigmented, Textured Or Smooth As Specified. 2Mm Thick Flat , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : (A) For Fixed Portion (I) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): (A) With Float Glass Panes Of 8 Mm Thickness (Weight Not Less Than 20 Kg/Sqm) , Providing And Fixing Machine Moulded Aluminium Covering Of Approved Pattern & Design, Made Out Of Machine Cut Aluminium Sheet And Machine Holed For Receiving Dash Fastener, Over Expansion Joints On Vertical Surfaces/Ceiling Floors, The Fixing On Plate In One Row On One Side Of Joint Only Shall Be Done With Stainless Steel Dash Fasteners Of 8 Mm Dia And 75 Mm Long Bolt Including Providing Aluminium Washers 2 Mm Thick & 15 Mm Dia , At A Staggered Pitch Of 200Mm Centre To Centre Including Drilling Holes In The Receiving Surface And Providing Expandable Plastic Sleeves In Holes Etc. Complete As Per Drawing And Direction Of Engineer- In -Charge.Powder Coated Aluminium Sheet 2.5Mm Thick (Minimum Thickness Of Powder Coating 50 Micron , Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete. Upto 5 Mm Depth And 5 Mm Width , Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I. Limpet And Bitumen Washers Complete. 0.80 Mm Thick With Zinc Coating Not Less Than 275 Gm/M² , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:5:10 (1 Cement : 5 Coarse Sand (Zone-Lll) Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : One Or More Coats On Old Work , Correction Factor On Dsr 2023 (Except Item No. 28 & 29) @0.973 A=9912657.27 , Add: Cost Index @ (-) 0.09% On A , Total (Including Item No. 28 & 29) =11978450.34 , Disposal Of Dismantled Material Of Steel Received From Demolition Programs And Wastage Of Old FurnitureS Not Serviceable /Scrap In Office Building As Per Direction Of Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 11
Delhi View Result →
29.
Power #10935091 Price Bid
Tender For Attending Of Emergency Breakdwon And Other Related Work In The Area Of Jurisdiction Of Edd, Babrala In Fy 2026-27=- 1 Removal Of Of Acsr Dog/Rabbit/Weasel Conductor From Both Side Spans Of Damaged Pole And Removal Of H.T/L.T Line Accessories From Damaged Pole. 2 Digging Of Pit Of Damaged Pole In Pakka Road (Hard Soil) With The Help Of Road Cutter/Digging Machine, Tractor Etc. For Dismantling The Pole. 3 Digging Of Pit Of Damaged Pole In Kachha Side Road (Soft Soil) For Dismantling The Damaged Pole. 4 Dismantling Of Damaged Single Support Pcc Pole/S.T Pole From Pit And S.T Pole Carriage From Work Site To J.ES Store And Damaged Pcc Pole Will Be Carriage From Wotk Site To Dumping Yard Including Loading & Unloading At Both Ends. Upto 60 KmS Distance 5 Carriage Of New Pcc Pole, Stp From Cetral Store, Chandausi/J.E Store To Work Site Including Safe Loading And Unloading At Both Ends. Upto 60 KmS Distance 6 Erection & Fabrication Of Following Supports Including Fitting Of All Reqired Accessories Of Ht/Lt Line As Per Respo Schedule. 7 Single Supports On St Pole 8 Single Support On Pcc Pole 9 Grouting, Concreting And Plinthing Of Single Support On St Pole With Cement, Stone Ballast & Coarse Sand In Ration Of 1:3:6 Complete In All Respect. 10 Laying And Sagging Of Acsr Dog/Rabbit/Weasel Conductor In Both Side Spans Of New Erected Pole In H.T/L.T Line. 11 For Attending 33 Kv/ 11 Kv Break Down Providing & Replacement Of Damged Disc/Insulators And Jointing Of Conductor And Replacement Of Jumpers Etc. 12 Fixing Of Disc Insulator As Per Site Requirement. 13 Fixing Of Pin Insulator As Per Site Requiement 14 Cutting/Chopping Tree Branches In The Way Of 33 Kv/11 Kv /L.T Lines. Per Km. 15 The Following Material Is Required To Supplied By The Contractor And Fixing Of Its Material On Poles As Required. 16 Stay Clamps 17 Stay Insulator 18 F-Brackets 19 X-Arm Holding Clamps 20 F Clamp 21 Earth Clamp 22 Bolt And Nuts Off Size 23 Acsr Weasel/Rabbit/Racoon/Dog Conductor Of Ht/Lt Lines In Different Sectors & Cartage Of Material From J.ES Store/Any Store Of Pvvnl Discom With Loading & Unloading At Both Ends. Upto 60 KmS Distance 24 H.T Line 25 L.T Line 26 Re-Laying Lifting, Stringing & Proper Sagging Of New Conductor In Place Of Old And Damaged Removed Conductor On H.T/L.T Line With Binding, Jumpering Etc.Including Cartage, Loading & Unloading From Central Store, Bijnor/J.E Store To Site Of Work. 27 Acsr Dog Conductor(H.T Line) 28 Acsr Weasel Conductor (L.T Line) 29 Re-Sagging Of Conductor Of Loose H.T/L.T Line Which Includes Opening Of Jumpers, Binding & Re Jumpering Etc. Complete In All Respect. Upto 60 KmS Distance 30 11 Kv(3Wire) Line At Various Places 31 Lt Line (4/5 Wire) At Various Places 32 Providing And Fixing Of Bamboo Phanti With The Binding Wire In L.T Lines At Different Places. 33 Carriage Of Ab Cable 25/50/95/120 Sqmm From Store Cente, Chandausi To Work Site Including Safe Loading And Unloading At Both Ends. 34 Laying, Lifting & Stringing Of Ab Cable Size 25/50/95/120 Sqmm In Place Of Dismentlalled Damaged Abc And Fixing Of All Types Clamps & Connection Complete In All Respect. 35 Carriage Of Distribution Box(Single Phase/Three Phase) From Store Center Chandausi To Work Site Including Safe Loading And Unloading At Both Ends. 36 Installation Of Single/Three Phase Distribution Box On Pole With Providing Suitable L.T Clamps And Making Lt Lead Connection Complete In All Respect. 37 Carriage Of Scrap Material From J.ES Store To Central Store Center, Chandausi Including Safe Loading And Unloading At Both Ends.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
30.
Power #10834501 Price Bid
Tender For Attending Of Emergency Breakdwon And Other Related Work In The Area Of Jurisdiction Of Edd, Chandausi In Fy 2026-27- 1 Removal Of Of Acsr Dog/Rabbit/Weasel Conductor From Both Side Spans Of Damaged Pole And Removal Of H.T/L.T Line Accessories From Damaged Pole. 2 Digging Of Pit Of Damaged Pole In Pakka Road (Hard Soil) With The Help Of Road Cutter/Digging Machine, Tractor Etc. For Dismantling The Pole. 3 Digging Of Pit Of Damaged Pole In Kachha Side Road (Soft Soil) For Dismantling The Damaged Pole. 4 Dismantling Of Damaged Single Support Pcc Pole/S.T Pole From Pit And S.T Pole Carriage From Work Site To J.ES Store And Damaged Pcc Pole Will Be Carriage From Wotk Site To Dumping Yard Including Loading & Unloading At Both Ends. Upto 60 KmS Distance 5 Carriage Of New Pcc Pole, Stp From Cetral Store, Chandausi/J.E Store To Work Site Including Safe Loading And Unloading At Both Ends. Upto 60 KmS Distance 6 Erection & Fabrication Of Following Supports Including Fitting Of All Reqired Accessories Of Ht/Lt Line As Per Respo Schedule. 7 Single Supports On St Pole 8 Single Support On Pcc Pole 9 Grouting, Concreting And Plinthing Of Single Support On St Pole With Cement, Stone Ballast & Coarse Sand In Ration Of 1:3:6 Complete In All Respect. 10 Laying And Sagging Of Acsr Dog/Rabbit/Weasel Conductor In Both Side Spans Of New Erected Pole In H.T/L.T Line. 11 For Attending 33 Kv/ 11 Kv Break Down Providing & Replacement Of Damged Disc/Insulators And Jointing Of Conductor And Replacement Of Jumpers Etc. 12 Fixing Of Disc Insulator As Per Site Requirement. 13 Fixing Of Pin Insulator As Per Site Requiement 14 Cutting/Chopping Tree Branches In The Way Of 33 Kv/11 Kv /L.T Lines. Per Km. 15 The Following Material Is Required To Supplied By The Contractor And Fixing Of Its Material On Poles As Required. 16 Stay Clamps 17 Stay Insulator 18 F-Brackets 19 X-Arm Holding Clamps 20 F Clamp 21 Earth Clamp 22 Bolt And Nuts Off Size 23 Acsr Weasel/Rabbit/Racoon/Dog Conductor Of Ht/Lt Lines In Different Sectors & Cartage Of Material From J.ES Store/Any Store Of Pvvnl Discom With Loading & Unloading At Both Ends. Upto 60 KmS Distance 24 H.T Line 25 L.T Line 26 Re-Laying Lifting, Stringing & Proper Sagging Of New Conductor In Place Of Old And Damaged Removed Conductor On H.T/L.T Line With Binding, Jumpering Etc.Including Cartage, Loading & Unloading From Central Store, Bijnor/J.E Store To Site Of Work. 27 Acsr Dog Conductor(H.T Line) 28 Acsr Weasel Conductor (L.T Line) 29 Re-Sagging Of Conductor Of Loose H.T/L.T Line Which Includes Opening Of Jumpers, Binding & Re Jumpering Etc. Complete In All Respect. Upto 60 KmS Distance 30 11 Kv(3Wire) Line At Various Places 31 Lt Line (4/5 Wire) At Various Places 32 Providing And Fixing Of Bamboo Phanti With The Binding Wire In L.T Lines At Different Places. 33 Carriage Of Ab Cable 25/50/95/120 Sqmm From Store Cente, Chandausi To Work Site Including Safe Loading And Unloading At Both Ends. 34 Laying, Lifting & Stringing Of Ab Cable Size 25/50/95/120 Sqmm In Place Of Dismentlalled Damaged Abc And Fixing Of All Types Clamps & Connection Complete In All Respect. 35 Carriage Of Distribution Box(Single Phase/Three Phase) From Store Center Chandausi To Work Site Including Safe Loading And Unloading At Both Ends. 36 Installation Of Single/Three Phase Distribution Box On Pole With Providing Suitable L.T Clamps And Making Lt Lead Connection Complete In All Respect. 37 Carriage Of Scrap Material From J.ES Store To Central Store Center, Chandausi Including Safe Loading And Unloading At Both Ends.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
31.
Power #10810908 Price Bid
Tender For To provide smooth power supply to the consumers in the jurisdiction of Electricity Distribution Section, Kiratpur, the work of attending to emergency breakdowns occurring in 33 KV/11 KV/LT lines of sudden nature at a fast pace and getting other necessary works done through external agencies.- 1 Removal of of ACSR Dog/RABBIT/WEASEL conductor from both side spans of damaged pole and removal of H.T/L.T line accessories from damaged pole. 2 Digging of pit of damaged pole in Pakka road (Hard soil) with the help of road cutter/digging machine, Tractor etc. for dismantling the pole. 3 Digging of pit of damaged pole in Kachha side road (soft soil) for dismantling the damaged pole. 4 Dismantling of damaged single support PCC Pole/S.T Pole from pit and S.T Pole carriage from work site to J.Es store and damaged PCC Pole will be carriage from wotk site to dumping yard including loading & unloading at both ends. 5 Carriage of new 8.5mt. Long PCC pole, 11 mtr. Long STP from Cetral Store, Bijnor/J.E Store to work site including safe loading and unloading at both ends. 6 Erection & fabrication of following supports including fitting of all reqired accessories of HT/LT line as per RESPO schedule. 7 Single supports on ST Pole of 11 Mtr. Long 8 Single support on PCC Pole 9 Grouting, concreting and plinthing of single support on ST pole of 11 mt. long with cement, stone ballast & coarse sand in ration of 1:3:6 complete in all respect. 10 Laying and Sagging of ACSR Dog/RABBIT/WEASEL conductor in both side spans of new erected pole in H.T/L.T line. 11 For attending 33 KV/ 11 KV Break down providing & replacement of damged Disc/Insulators and jointing of conductor and replacement of Jumpers etc. 12 Fixing of Disc Insulator as per Site requirement. 13 Fixing of Pin Insulator as per site requirement 14 Cutting/chopping tree branches in the way of 33 KV/11 KV /L.T lines. PER KM. 15 The following material is required to supplied by the contractor and Fixing of its material on Poles as required. 16 Stay Clamps 17 stay Insulator 18 F-Brackets 19 X-Arm Holding Clamps 20 F Clamp 21 Earth Clamp 22 Bolt and Nuts off Size 23 ACSR Weasel/Rabbit/Racoon/Dog conductor of HT/LT lines in different sectors & cartage of material from J.Es Store/Any Store of PVVNL Discom with loading & unloading at both ends. 24 H.T line 25 L.T line 26 Re-laying lifting, stringing & proper sagging of new conductor in place of old and damaged removed conductor on H.T/L.T line with binding, jumpering etc.including cartage, loading & unloading from Central store, Bijnor/J.E Store to site of work. 27 ACSR Dog Conductor(H.T line) 28 ACSR Weasel conductor (L.T line) 29 Re-sagging of conductor of loose H.T/L.T line which includes opening of jumpers, binding & re jumpering etc. complete in all respect. 30 11 KV(3wire) line at various places 31 LT line (4/5 wire) at various places 32 Providing and fixing of Bamboo Phanti with the binding wire in L.T lines at different places. 33 Carriage of AB cable 95/120 Sqmm from Store Cente, Bijnor to work site including safe loading and unloading at both ends. 34 Laying, lifting & Stringing of AB cable size 95/120 sqmm in place of dismentlalled damaged ABC and fixing of all types clamps & connection complete in all respect. 35 Carriage of Distribution box(Single Phase/Three Phase) from Store Center Bijnor to work site including safe loading and unloading at both ends. 36 Installation of single/Three Phase Distribution box on pole with providing suitable L.T clamps and making LT lead connection complete in all respect. 37 Overhauling & maintenance of UG XLPE cable /cable box for 70/120/185/300 MM 2 HT XLPE cable(including 33KV/11KV) 38 Utilisation of fault loactor for fault detection 39 Excavating the pinpointed fault area 40 Performing a cable joint on the damaged section through cable jointing kit 41 Fixing the damaged cable box for 70/120/185/300 MM 2 HT XLPE cable (including 33KV/11KV) 42 Carriage of scrap material from J.Es store to Central Store Center, Bijnor including safe loading and unloading at both ends. Please Enable Macros to View BoQ information
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
32.
Power #10810896 Price Bid
Tender For provide smooth power supply to the consumers in the jurisdiction of Electricity Distribution Section, Chandpur, the work of attending to emergency breakdowns occurring in 33 KV/11 KV/LT lines of sudden nature at a fast pace and getting other necessary works done through external agencies.- 1 Removal of of ACSR Dog/RABBIT/WEASEL conductor from both side spans of damaged pole and removal of H.T/L.T line accessories from damaged pole. 2 Digging of pit of damaged pole in Pakka road (Hard soil) with the help of road cutter/digging machine, Tractor etc. for dismantling the pole. 3 Digging of pit of damaged pole in Kachha side road (soft soil) for dismantling the damaged pole. 4 Dismantling of damaged single support PCC Pole/S.T Pole from pit and S.T Pole carriage from work site to J.Es store and damaged PCC Pole will be carriage from wotk site to dumping yard including loading & unloading at both ends. 5 Carriage of new 8.5mt. Long PCC pole, 11 mtr. Long STP from Cetral Store, Bijnor/J.E Store to work site including safe loading and unloading at both ends. 6 Erection & fabrication of following supports including fitting of all reqired accessories of HT/LT line as per RESPO schedule. 7 Single supports on ST Pole of 11 Mtr. Long 8 Single support on PCC Pole 9 Grouting, concreting and plinthing of single support on ST pole of 11 mt. long with cement, stone ballast & coarse sand in ration of 1:3:6 complete in all respect. 10 Laying and Sagging of ACSR Dog/RABBIT/WEASEL conductor in both side spans of new erected pole in H.T/L.T line. 11 For attending 33 KV/ 11 KV Break down providing & replacement of damged Disc/Insulators and jointing of conductor and replacement of Jumpers etc. 12 Fixing of Disc Insulator as per Site requirement. 13 Fixing of Pin Insulator as per site requirement 14 Cutting/chopping tree branches in the way of 33 KV/11 KV /L.T lines. PER KM. 15 The following material is required to supplied by the contractor and Fixing of its material on Poles as required. 16 Stay Clamps 17 stay Insulator 18 F-Brackets 19 X-Arm Holding Clamps 20 F Clamp 21 Earth Clamp 22 Bolt and Nuts off Size 23 ACSR Weasel/Rabbit/Racoon/Dog conductor of HT/LT lines in different sectors & cartage of material from J.Es Store/Any Store of PVVNL Discom with loading & unloading at both ends. 24 H.T line 25 L.T line 26 Re-laying lifting, stringing & proper sagging of new conductor in place of old and damaged removed conductor on H.T/L.T line with binding, jumpering etc.including cartage, loading & unloading from Central store, Bijnor/J.E Store to site of work. 27 ACSR Dog Conductor(H.T line) 28 ACSR Weasel conductor (L.T line) 29 Re-sagging of conductor of loose H.T/L.T line which includes opening of jumpers, binding & re jumpering etc. complete in all respect. 30 11 KV(3wire) line at various places 31 LT line (4/5 wire) at various places 32 Providing and fixing of Bamboo Phanti with the binding wire in L.T lines at different places. 33 Carriage of AB cable 95/120 Sqmm from Store Cente, Bijnor to work site including safe loading and unloading at both ends. 34 Laying, lifting & Stringing of AB cable size 95/120 sqmm in place of dismentlalled damaged ABC and fixing of all types clamps & connection complete in all respect. 35 Carriage of Distribution box(Single Phase/Three Phase) from Store Center Bijnor to work site including safe loading and unloading at both ends. 36 Installation of single/Three Phase Distribution box on pole with providing suitable L.T clamps and making LT lead connection complete in all respect. 37 Overhauling & maintenance of UG XLPE cable /cable box for 70/120/185/300 MM 2 HT XLPE cable(including 33KV/11KV) 38 Utilisation of fault loactor for fault detection 39 Excavating the pinpointed fault area 40 Performing a cable joint on the damaged section through cable jointing kit 41 Fixing the damaged cable box for 70/120/185/300 MM 2 HT XLPE cable (including 33KV/11KV) 42 Carriage of scrap material from J.Es store to Central Store Center, Bijnor including safe loading and unloading at both ends. Please Enable Macros to View BoQ information
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
33.
Public Administrative Department #10769999 Price Bid
Tender For Mg Narega Material Supply Tender Fy 2023-24 For Gram Panchayat Bhalni Ps Bagoda-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
34.
Public Administrative Department #10750524 Price Bid
Construction Material Supply And Providing Equipment For Sundry Construction Works Under Mgnrega And Other Scheme In Gram Panchayat Bhiyad-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
35.
Public Administrative Department #10702499 Price Bid
Gram Panchyat 2 Sdmaterial Purchase And Hiring Of Equipments-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
36.
Public Administrative Department #10702492 Price Bid
Gram Panchyat 2Apmaterial Purchege And Hiring Of Equipments-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
37.
Public Administrative Department #10702486 Price Bid
Gram Panchyat Jankidaswalamaterial Purchege And Hiring Of Equipments-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
38.
Public Administrative Department #10702481 Price Bid
Gram Panchyat Bhagwansarmaterial Purchege And Hiring Of Equipments-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
39.
Public Administrative Department #10702474 Price Bid
Gram Panchyat Rayanwali Material Purchase And Hiring Of Equipments-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
40.
Public Administrative Department #10702464 Price Bid
Tender For Gram Panchyat Kardoomaterial Purchege And Hiring Of Equipments-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Rajasthan View Result →
41.
Public Administrative Department #10702458 Price Bid
Gram Panchyat Nirwanamaterial Purchase And Hiring Of Equipments-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
42.
Public Administrative Department #10702412 Price Bid
Gram Panchyat Sangharmaterial Purchege And Hiring Of Equipments-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Rajasthan View Result →
43.
Public Administrative Department #10702300 Price Bid
Supply Of Material In Gram Panchayat Bhana Panchayat Samiti Rajsamand Dist. Rajsamand-2 Ghadla / Kankar / Jhajhra 3 Gara-Mitti / Mud Masala 4 Lime Kiln Lime For Masonry Work 5 Cement 6 P.P.C. 7 White Cement 8 Fine Aggregate 9 Sand / Gravel 10 Gravel - Local 11 Rakhi ( Fly Ash ) 12 Surkhi 13 Stone Powder ( Stone Dust, In Masonry Work ) 14 Ballast Stone / Brick ( For Other Than Road Work ) 15 Stone Measuring 40Mm ( Hand-Broken Grit ) ( Cut Voids 1 / 11 ) 16 Stone 40Mm Grit ( Crushed With Crusher ) ( Cut Voids 1 / 11 ) 20Mm Grit Of 17 Stone ( Crushed ) 18 Stone 12 / 10 / 6Mm Grit ( Crushed ) 19 Brick Ballast Material For 20 Road Works ( Including 5 Km Lead ) 21 63-40 Mm Crusher Broken Stone Aggregate ( Cut Voids 1 / 11 ) 22 63-40 Mm Hand-Broken Stone Aggregate ( Cut Voids 1 / 11 ) 23 90-45 Mm. Hand-Broken Stone Block ( Cut Voids 1 / 11 ) 24 Query Rubbish ( Cut Voids 1 / 6 ) 25 Gravel ( Cut Voids 1 / 6 ) 26 Shanker ( Cut Voids 1 / 6 ) 27 Bidding Material ( Pi 4-6 ) ( Cut Voids 1 / 6 ) 28 Bricks ( 22.5 X 11 X 7.50 Cm ) 29 First Class 30 Second Class ( Ii Class ) 31 Soling / Kharanja / Masonry Stone 32 Masonry Berdda ( Rr ) 33 Masonry Scrap ( Cr ) 34 Kharanja Soling ( For Floor Work Up To 15Cm Height ) 35 Kharanja Soling ( 23Cm Height For Road / Kharanja Work ) 36 Jodhpuri Type Stone Slabs / Chaaps / Cut Pieces ( Length 2-3, Width 10-12, Thickness 2.5-3.5 ) 37 Flaky Material ) ( 3-4 Thick & Length And Width 1-2 ) 38 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc ) 39 Up To 25Mm Thickness 40 Up To 25-40Mm Thickness 41 Up To 40-50Mm Thickness 42 Up To 50-75Mm Thickness 43 Up To 75-100Mm Thickness 44 Up To 100-150Mm Thickness 45 Floor / Patti Patan Katla Stone 46 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More Area 47 Patti Pattan Katla 60-75Mm Thickness, Min. 3 Sqft Or More Area 48 Unpolished Rough Kota Stone Up To 49 900 Sq Cm From 50 901 To 2300 Sq. Cm 51 More Than 2300 Sq Cm 52 Polished Kota Stones ( One Side Polished ) Up To 53 900 Sq Cm 54 From 901 To 2300 Sq. Cm 55 More Than 2300 Sq Cm 56 Marble Stone ( Makrana Adanga 20Mm Thick ) 57 From 901 To 2300 Sq. Cm Up To 58 900 Sq Cm 59 More Than 2300 Sq.Cm 60 Marble Chips 61 Marble Powder 62 Marble Stone ( Rajnagar Ii Quality / Local 20Mm Thick ) 63 From 901 To 2300 Sq. Cm Up To 64 900 Sq Cm 65 More Than 2300 Sq Cm 66 Stone Threshold 67 Single Paitam Size 100 X 75 Mm. 68 Double Paytam Size 125 X 75 Mm. 69 Stone Tablets 70 Up To 1.5 M Length, Minimum 40Mm Thick 71 1.5M To 2.40M Length, Minimum 50Mm Thick 72 2.4M To 3.0M Length, Minimum 65Mm Thick 73 Above 3.0 M Length, Minimum 75Mm Thick 74 Precast Tiles / Blocks 75 Glazed Size-30X45 Cm 76 Mosaic Size-40Mm Thick 77 Vitrified Size-60X60 Cm 78 Interlock Tiles / Brick / Block For Road Work 79 Cement Interlocking Block M-30Grade, 60Mm Thick 80 Cement Interlocking Block M-30Grade, 80Mm Thick 81 Cement Interlocking Block M-30Grade, 100Mm Thick 82 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 83 1.50 Sq Mm 84 2.50 Sq Mm 85 0.50 Sq Mm 86 1.00 Sq.Mm 87 4.00 Sq.Mm 88 6.00 Sq.Mm 89 Local Wooden Fittings ( For Doors, Windows And Furniture ) 90 Mangoes 91 Acacia 92 Others 93 Factory-Made Doors ( 30 Mm Thick, Solid Core Single Leaf ) 94 Structural Steel 95 Iron ( For Tor Steel Fe 415 / 500 Reinforcement ) 96 Wiring Wire 18 Gauge 97 Iron Guard 98 Koniya Loha / Chokor Sariya / Patti / Angle Iron 99 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 100 Mesh 101 Iron Jali ( 24 Gauge, 14 Mesh ) 102 Cement Concrete Jali Akash Patal 40Mm Thick 103 Glass 104 3 Mm Thick Glass 105 Paint 106 Enamel Paint 107 Distemper ( Water Bound ) 108 Lime - For Painting ( Aaras / Kali ) 109 Primer ( For Iron / Wood ) 110 Petroleum Products 111 Diesel Hsd 112 Movil Oil 113 Bitumen Shalitex Board ( 25 Mm Thick ) 114 Plain Sheet 115 G.I. Chaddar 22 Gauge ( 0.80 Mm ) 116 G.I. Sheet 24 Gauge ( 0.63 Mm ) 117 Ms Sheet 22 Gauge ( 0.80 Mm ) 118 Ms Sheet 24 Gauge ( 0.63 Mm ) 119 Corrugated Sheet 120 G.I. Sheet 1 Mm Fat 121 G.I.Sheet 22 Gauge ( 0.80 M.M. ) 122 Asbestos Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 123 Other Sheets 124 P.V.C. Chaddar 1 Mm Thick ( Coloured / Plain ) 125 Green Yellow Color Literoof Expo Cover ( 183X90 ) 126 Pipe 127 G.I. 15 Mm Diameter ( B Class ) 128 G.I. 20 Mm Diameter ( B Class ) 129 G.I. 25 Mm Diameter ( B Class ) 130 Ac 75 Mm Diameter 131 Ac 100 Mm Diameter 132 P.V.C. 90 Mm Diameter ( With Ring ) 133 P.V.C. 110 Mm Diameter ( With Ring ) 134 P.V.C. 140 Mm Diameter ( With Ring ) 135 P.V.C. 110 Mm ( 2.5Kg / Sq.Cm ) With Coupler 136 Sanitary 137 Indian W.C. 138 Orrisa W.C. 139 European W.C. 140 Foot Rest 141 Porcelain Lipped Urinal 430*350*300Mm With Coupler, Bracket And P.V.C. Waste Pipe 142 Wash-Basin 450*300Mm With Couplin, Bracket And P.V.C. Waste Pipe 143 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M.Long 144 C.P.Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 145 C.P.Bib Cock ( Dia 15 Mm ) ( Is Mark ) 146 125 Mm Diameter Cp Grating 147 R.C.C. Np3 Smoke Pipe With Collar 148 1200Mm Diameter 149 1000Mm Diameter 150 750Mm Diameter 151 600Mm Diameter 152 450Mm Diameter 153 300Mm Diameter 154 Steel Conduit Isi Marked 155 20 Mm Diameter 156 25 Mm Diameter 157 Charcoal 158 P.V.C. Water Tank With Cover ( ( As Per Is:12701-1989 ) 159 13 / 0.20 Mm Twin Core Pvc Sheathed Flat Flexible Copper Cable 160 Steel Fasteners 6Mm X 75Mm 161 Pvc Conduit Isi Marked 162 25 Mm Diameter 163 20 Mm Diameter 164 Junction Box 165 20 Mm Two Way 166 20 Mm, One Way 167 25 Mm Two Way 168 20 Mm One Way ( Pvc ) 169 Module Gi Box 170 For 3 Modules 171 For 2 Modules 172 Module Base & Cover Plate 173 For 2 Modules 174 For 3 Modules 175 Modular Switch One Way, Isi Marked 176 Sp 15 / 16 Ampere 177 Sp 5 / 6 Ampere 178 Modular Socket Outlet, Isi Marked 179 3 Pin 5 / 6 Ampere 180 6 Pin 15 / 16 Ampere 181 Mcb Db 182 2+2 Way, Spn, Single Door 183 2+4 Way Spn Single Door 184 2+6 Way, Spn, Single Door 185 Gi Pipe ( Medium Grade ) 186 15.00 Mm Diameter 187 40.00 Mm Diameter 188 Copper Wire 8 Swg ( 4.00 Mm Diameter ) ( 0.117 Kg / M ) 189 Ci / Ms Cover Plate Attached To Frame Of Locking Arrangement 190 Equipment ( With Pol And Driver ) 191 Diesel Road Roller 8 To 10 Ton 192 Sheeps Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Liters Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 H.P. 199 Niddle / Plate Vibrator With Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydraulic Excavator / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Tp With Wooden Shutters, Bali And Other Material, Installation On Site, Removal After Stipulated Period 207 Tp With Shuttering Ply, Bat And Other Material, Installation On Site, Removal After Prescribed Period 208 Shuttering Tp With Iron Plate, Baluster And Other Materials, Installation On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) Iron Form For 211 Wells ( Diameter 3M, Height 75Cm ) With Tp, Installation On Site, Removal After Stipulated Period 212 Cultivator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Rajasthan View Result →
44.
Power #10662734 Price Bid
Estimate For Augmentation (Conversion) Of 80 Sq Mm Bare Conductor Into 99 Sq Mm Covered Conductor On 33 Kv Bhopal-1And2 Feeder (Dcds) From Sanvariya Factory 4P To Single Pole Cut Point (Near Kheda Pati Mata Madir Mandideep) Under Htm Kolar. - H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-15 mtr. Long =565.5 kg 2 33 KV (45KN) Composite Polymer Disc Insulators 3 33 KV Strain hardware (T&C type) fittings 4 33 KV Pin Insulator Polymer Composite (10 KN) 5 M S ANGLE 75X75X6 mm 6 M S Channel 100X50x6 mm 7 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 8 Aluminium Binding wire and tape 9 Danger Boards Enamelled 33 KV 10 33KV(104.98 SQMM )AL-59 ACS XLPE Covered Conductors as per EN:50397,P-1:2020, SS 4240813,SS 4240814,IEC 1232 WITH 95⁰C CONTINUOUS OPERATINGTEMPERATURE of ACS class 20S A /Grade A extruded seme conducting Material,with MVCC Accessories (1KM Cond.) 11 Red oxide paint 12 Aluminium paint 13 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 14 Stay set 20 mm. complete without Stay wire (Painted) 15 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 16 Concreting of structures & foundation (1:3:6) 17 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 18 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 19 Stone Block/Pre cast block for base pedding(450X450X75MM) 20 CONDUCTOR ACSR SCRAP (Return From Side To Area Store Bhopal) 21 Labour Charges 22 Transportation Charges for All Material & Equipments 23 GST on Transportation @5% 24 GST on (Contractor side Material + Labour) @18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
45.
Power #10657180 Price Bid
Tender For Attending Of Emergency Breakdwon And Other Related Work In The Area Of Jurisdiction Of Edd, Bijnor. - Removal of of ACSR Dog conductor from both side spans of damaged pole and removal of H.T/L.T line accessories from damaged pole. 2 Diggingof pit of damaged pole in Pakka road (Hard soil) with the help of road cutter/digging machine, Tractor etc. for dismantling the pole. 3 Diggingof pit of damaged pole in Kachha side road(soft soil) for dismantling the damaged pole. 4 Dismantling of damaged single supportPCC Pole/S.T Polefrom pitandS.T Pole carriage from work site to J.Es store and damaged PCC Pole will be carriage from wotk site to dumping yard including loading & unloading at both ends. 5 Carriage ofnew 8.5mt. Long PCC pole, 11 mtr. Long STP from Cetral Store, Bijnor/J.E Store to work site including safe loading and unloading at both ends. 6 Erection & fabrication of following supports including fitting of all reqired accessories of HT/LT line as per RESPO schedule. 7 Single supports on ST Pole of 11 Mtr. Long 8 Single support on PCC Pole 9 Grouting, concreting and plinthing of single support on ST pole of 11 mt. long with cement, stone ballast & coarse sand in ration of 1:3:6 complete in all respect. 10 Laying and Sagging of ACSR Dog conductor in both side spans of new erected pole in H.T/L.T line. 11 For attending 33 KV/ 11 KV Break down providing & replacement of damged Disc/Insulators and jointing of conductor and replacement of Jumpers etc. 12 Fixing of Disc Insulator as per Site requirement. 13 Fixing of Pin Insulator as per site requiement 14 Cutting/chopping tree branches in the way of 33 KV/11 KV /L.T lines. 15 The following material is requiredto supplied by the contractor and Fixing of its material on Poles as required. 16 Stay Clamps 17 stay Insulator 18 F-Brackets 19 X-Arm Holding Clamps 20 F Clamp 21 Earth Clamp 22 Bolt and Nuts off Size 23 Laying and Sagging of Weasel/Rabbit/Racoon/Dog conductor ofHT/LT lines in different sectors& cartage of material from J.Es Store/Any Store of PVVNL Discom with loading & unloading at both ends. 24 H.T line 25 L.T line 26 Re-laying lifting, stringing & proper sagging of new conductor in place of old and damagedremoved conductor on H.T/L.T line with binding, jumpering etc.including cartage, loading & unloading from Central store, Bijnor/J.E Store to site of work. 27 ACSR Dog Conductor(H.T line) 28 ACSR Weasel conductor (L.T line) 29 Re-sagging of conductor of loose H.T/L.T line which includes opening of jumpers, binding & re jumpering etc. complete in all respect. 30 11 KV(3wire) line at various places 31 LT line (4/5 wire) at various places 32 Providing and fixing of Bamboo Phanti with the binding wire in L.T lines at different places. 33 Carriage of scrap material from J.Es store to Central Store Center, Bijnor including safe loading and unloading at both ends. 34 Carriage of AB cable 95/120 Sqmm from Store Cente, Bijnor to work site including safe loading and unloading at both ends. 35 Laying, lifting & Stringing of AB cable size 95/120 sqmm in place of dismentlalled damaged ABC and fixing of all types clamps & connection complete in all respect. 36 Carriage of Distribution box(Single Phase/Three Phase) from Store Center Bijnor to work site including safe loading and unloading at both ends. 37 Installation of single/Three Phase Distribution box on pole with providing suitable L.T clamps and making LT lead connection complete in all respect.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
46.
Power #10657178 Price Bid
Tender For Attending Of Emergency Breakdwon And Other Related Work In The Area Of Jurisdiction Of Edd, Kiratpur. - Removal of of ACSR Dog conductor from both side spans of damaged pole and removal of H.T/L.T line accessories from damaged pole. 2 Diggingof pit of damaged pole in Pakka road (Hard soil) with the help of road cutter/digging machine, Tractor etc. for dismantling the pole. 3 Diggingof pit of damaged pole in Kachha side road(soft soil) for dismantling the damaged pole. 4 Dismantling of damaged single supportPCC Pole/S.T Polefrom pitandS.T Pole carriage from work site to J.Es store and damaged PCC Pole will be carriage from wotk site to dumping yard including loading & unloading at both ends. 5 Carriage ofnew 8.5mt. Long PCC pole, 11 mtr. Long STP from Cetral Store, Bijnor/J.E Store to work site including safe loading and unloading at both ends. 6 Erection & fabrication of following supports including fitting of all reqired accessories of HT/LT line as per RESPO schedule. 7 Single supports on ST Pole of 11 Mtr. Long 8 Single support on PCC Pole 9 Grouting, concreting and plinthing of single support on ST pole of 11 mt. long with cement, stone ballast & coarse sand in ration of 1:3:6 complete in all respect. 10 Laying and Sagging of ACSR Dog conductor in both side spans of new erected pole in H.T/L.T line. 11 For attending 33 KV/ 11 KV Break down providing & replacement of damged Disc/Insulators and jointing of conductor and replacement of Jumpers etc. 12 Fixing of Disc Insulator as per Site requirement. 13 Fixing of Pin Insulator as per site requiement 14 Cutting/chopping tree branches in the way of 33 KV/11 KV /L.T lines. 15 The following material is requiredto supplied by the contractor and Fixing of its material on Poles as required. 16 Stay Clamps 17 stay Insulator 18 F-Brackets 19 X-Arm Holding Clamps 20 F Clamp 21 Earth Clamp 22 Bolt and Nuts off Size 23 Laying and Sagging of Weasel/Rabbit/Racoon/Dog conductor ofHT/LT lines in different sectors& cartage of material from J.Es Store/Any Store of PVVNL Discom with loading & unloading at both ends. 24 H.T line 25 L.T line 26 Re-laying lifting, stringing & proper sagging of new conductor in place of old and damagedremoved conductor on H.T/L.T line with binding, jumpering etc.including cartage, loading & unloading from Central store, Bijnor/J.E Store to site of work. 27 ACSR Dog Conductor(H.T line) 28 ACSR Weasel conductor (L.T line) 29 Re-sagging of conductor of loose H.T/L.T line which includes opening of jumpers, binding & re jumpering etc. complete in all respect. 30 11 KV(3wire) line at various places 31 LT line (4/5 wire) at various places 32 Providing and fixing of Bamboo Phanti with the binding wire in L.T lines at different places. 33 Carriage of scrap material from J.Es store to Central Store Center, Bijnor including safe loading and unloading at both ends. 34 Carriage of AB cable 95/120 Sqmm from Store Cente, Bijnor to work site including safe loading and unloading at both ends. 35 Laying, lifting & Stringing of AB cable size 95/120 sqmm in place of dismentlalled damaged ABC and fixing of all types clamps & connection complete in all respect. 36 Carriage of Distribution box(Single Phase/Three Phase) from Store Center Bijnor to work site including safe loading and unloading at both ends. 37 Installation of single/Three Phase Distribution box on pole with providing suitable L.T clamps and making LT lead connection complete in all respect.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
47.
Public Administrative Department #10441821 Price Bid
Rate Contract For Material Supply For Fy 2021-22 Gp Khakhwali .-1 Ghadla / Kankar / Jhajra 2 Mud Masala / Mud Masala 3 Lime 4 Cement 5 Ppc 6 White Cement 7 Fine Aggregate 8 Sand / Gravel 9 Gravel - Local 10. Fly Ash 11 Surkhi 12 Stone Powder ( Stone Dust, In Masonry Work ) 13 Ballast Stone / Brick Key ( For Other Than Road Work ) 14 Stone ( Hand-Broken Grit ) Measuring 40Mm ( Cut The Voids 1 / 11 ) 15 Stone 40Mm Grit ( Crusher Broken ) ( Cuts Voids 1 / 11 ) 16 Stones 20Mm Grit ( Broken With A Crusher ) 17 Stones 12 / 10 / 6Mm Grit ( Broken By Crusher ) 18 Brick Ballast 19 Materials For Road Work ( Including 5 Km Lead ) 20 63-40 Mm Hand-Broken Stone Block ( Cut The Voids 1 / 11 ) 21 90-45 Mm. Hand Broken Stone Block ( Cut The Voids 1 / 11 ) 22 Query Rubbish ( Cut The Voids 1 / 6 ) 23 Gravel ( Cut The Voids 1 / 6 ) 24 Kankar ( Cut The Voids 1 / 6 ) 25 Bidding Material ( Pi 4-6 ) ( Cut The Voids 1 / 6 ) 26 Bricks ( 22.5 X 11 X 7.50 Cm ) 27 First Class ( I St Class ) 28 Second Class 29 Solling / Kharja / Masonry Stone 30 Masonry Berdah ( Rr ) 31 Masonry Scrap ( Cr ) 32 Kharja Soling ( For Floor Work Up To 15Cm Height ) 33 Kharja Soling ( 23Cm Height For Road / Kharja Work ) 34 Stone Arch ( Width 10-12, Length 2-3, Thickness 2.5-3.5 ) 35 Flaky Material ( 3-4 Thick & Length, 1-2 Width ) 36 Sandstone ( Dpc, Sill, Coping, Lintel, Tand, Almirha Etc. ) 37 Up To 25Mm Thickness 38 Up To 25-40Mm Thickness 39 Up To 40-50Mm Thickness 40 Up To 50-75Mm Thickness 41 Up To 75-100Mm Thickness 42 Up To 100-150Mm Thickness 43 Floors / Patti Patan Katala Stone 44 Floor Planks Upto 35Mm Thick, Min. 3 Sqft Or More 45 Patti For Patti Katla 60-75Mm Thickness, Min. 3 Sqft Or More 46 Unpolished Rough Kota Stone 47 Up To 900 Sq Cm 48 From 901 To 2300 Sq. Cm 49 Over 2300 Sq Cm 50 Polished Kota Stones ( One Side Polished ) 51 Up To 900 Sq Cm 52 From 901 To 2300 Sq Cm 53 Over 2300 Sq Cm 54 Marble Stones ( Makrana Adanga 20Mm Thick ) 55 From 901 To 2300 Sq Cm 56 Up To 900 Sq Cm 57 Over 2300 Sq Cm 58 Marble Chips 59 Marble Powder 60 Marble Stones ( Rajnagar Ii Quality / Local 20Mm Thick ) 61 From 901 To 2300 Sq. Cm 62 Up To 900 Sq Cm 63 Over 2300 Sq Cm 64 Stone Bar 65 Single Paytom Size 100 X 75 Mm. 66 Double Paytom Size 125 X 75 Mm. 67 Stone Strips 68 Up To 1.5 M Length, Minimum 40Mm Thick 69 1.5 M To 2.40 M Length, Minimum 50Mm Thick 70 2.4 M To 3.0 M Length, Minimum 65Mm Thick 71 Above 3.0 M Length, Minimum 75Mm Thick 72 Precast Tiles / Blocks 73 Glazed Size-30X45 Cm 74 Mosaic Size-40Mm Thick 75 Vitrified Size-60X60 Cm 76 Interlock Tiles / Brick / Block For Road Work 77 Cement Interlocking Block M-30Grade, 60Mm Thick 78 Cement Interlocking Block M-30Grade, 80Mm Thick 79 Cement Interlocking Block M-30Grade, 100Mm Thick 80 Local Wood Fittings ( For Doors, Windows And Furniture ) 81 Mango 82 Acacia 83 Others 84 Factory Made Doors ( 30 Mm Thick, Solid Core Single Pallet ) 85 Structural Steel 86 Iron ( Tor Steel Fe 415 / 500 For Reinforcement ) 87 Winding Wire 18 Gauge 88 Iron Guard 89 Koniya Iron / Square Bar / Leaf / Angle Iron 90 Barbed Iron Wire ( Size 12 Guage Wire And 12 Guage Strad / 12 Guage Wire And 14 Guage Strad / 14 Guage 91 Forged 92 Iron Mesh ( 24 Gauge, 14 Mesh ) 93 Cement Concrete Jali Akash Patal 40Mm Thick 94 Glasses 95 3 Mm Thick Glass 96 Paint 97 Enamel Paint 98 Distemper ( Water Bound ) 99 Lime - For Painting ( Aaras / Bud ) 100 Primer ( For Iron / Wood ) 101 Petroleum Products 102 Diesel Hsd 103 Movil Oil 104 Bitumen Shellitax Board ( 25 Mm Thick ) 105 Plain Sheet 106 G.I. Sheet 22 Gauge ( 0.80 Mm ) 107 G.I. Sheet 24 Gauge ( 0.63 Mm ) 108 Ms. Sheet 22 Gauge ( 0.80 Mm ) 109 Ms Sheet 24 Gauge ( 0.63 Mm ) 110 Corrugated Sheet 111 Gi Sheet 1 Mm Fat 112 Gi Sheet 22 Gauge ( 0.80 M.M. ) 113 Asvestus Cement Sheet 6Mm ( 2.5 / 2.75X1m ) 114 Other Sheets 115 Pvc Sheet 1 Mm Thick ( Colour / Plain ) 116 Green Yellow Literoof Expo Sheet ( 183X90 ) 117 Pipe 118 Gi 15 Mm Diameter ( B Class ) 119 Gi 20 Mm Diameter ( B Class ) 120 Gi 25 Mm Diameter ( B Class ) 121 Ac 75 Mm Diameter 122 A.C. 100 Mm Diameter 123 Pvc 90 Mm Diameter ( Including Ring ) 124 Pvc 110 Mm Diameter ( Including Ring ) 125 Pvc 140 Mm Diameter ( Including Ring ) 126 Pvc 110Mm ( 2.5Kg / Sq.Cm ) My Coupler 127 Sanitary 128 Indian W.C. 129 Orrisa W.C. 130 European W.C. 131 Foot Rest 132 Porcelain Urinal 430*350*300Mm With Cuplin, Bracket & Pvc Waste Pipe 133 Hand Washing Utensil ( Wash-Basin ) 450*300Mm With Cuplin, Bracket And Pvc. Waste Pipe 134 Stone Screw ( S.W. ) Pipe 100 M.M. Diameter, 0.6 M Long 135 Cp Pillar Cock ( Dia 15 Mm ) ( Is Mark ) 136 Cpbib Cock ( Dia 15 Mm ) ( Is Mark ) 137 125 Mm Diameter Cp Grating 138 Rcc Np3 Hume Pipe My Collar 139 1200Mm Diameter 140 1000Mm Diameter 141 750Mm Diameter 142 600Mm Diameter 143 450Mm Diameter 144 300Mm Diameter 145 Fr Pvc Insulated Copper Conductor Single Core Cable Isi Marked 146 1.50 Sq Mm 147 2.50 Sq Mm 148 4.00 Sq Mm 149 6.00 Sq Mm 150 0.50 Sq Mm 151 1.00 Sq Mm 152 13 / 0.20 Mm Twin Core Pvc Shelled, Flat Flexible Copper Cable 153 Steel Conduit Isi Marked 154 20 Mm Diameter 155 25 Mm Diameter 156 Pvc Conduit Isi Marked 157 20 Mm Diameter 158 25 Mm Diameter 159 Junction Box 160 20 Mm, One Way 161 20 Mm Two Way 162 25 Mm Two Way 163 20 Mm One Way ( Pvc ) 164 Module Gi Box 165 For 2 Modules 166 For 3 Modules 167 Module Base & Cover Plate 168 For 2 Modules 169 For 3 Modules 170 Modular Switch One Way, Isi Marked 171 Sp 5 / 6 Ampere 172 Sp 15 / 16 Ampere 173 Modular Socket Outlet, Isi Marked 174 3 Pin 5 / 6 Ampere 175 6 Pin 15 / 16 Ampere 176 Steel Fastener 6Mm X 75Mm 177 Mcb Db 178 2+2 Way, Spn, Single Door 179 2+4 Way, Spn, Single Door 180 2+6 Way, Spn, Single Door 181 Gi Pipe ( Medium Rated ) 182 15.00 Mm Diameter 183 40.00 Mm Diameter 184 Copper Wire 8 Swg ( 4.00 Mm Dia ) ( 0.117 Kg / M ) 185 Ci / Ms Cover Plate Attached To The Frame Of The Locking Arrangement 186 Charcoal 187 Pvc Water Tank May Cover ( ( As Per Is:12701-1989 ) 500 Liters 188 500 Yhvj 189 1000 Yhvj 190 2000 Yhvj 191 Diesel Road Roller 8 To 10 Ton 192 Sheep Foot Roller 193 Truck 9 Ton 194 Tractors ( 25-40 Hp ) 195 Tractor Trolley 196 Tractor Water Tanker Capacity 4000 Ltrs Water 197 Cement Concrete Mixer 5-7 Cubic Feet 198 Pumping Set 15 Hp 199 Niddle / Plate Vibrator May Operator 200 Camel Cart / Bullock Cart With Driver 201 Grinding Machine With Operator ( Large, Motorized ) 202 Compressor 203 Hydrolic Excavater / Jcb ( Bucket Capacity 0.4Cum ) 204 Dumper 205 Scraper 206 Shuttering Of Wooden Beams, Beams And Other Material With Tp, Installation On Site, Removal After Prescribed Period 207 Shuttering Ply Seam, Bat And Other Material With Tp, On Site, Removal After Stipulated Period 208 Shuttering Of Iron Plate, Tp And Other Material With Tp, On Site, Removal After Stipulated Period 209 Water And Pumping Expenses ( Stuffing ) 210 Grinding Machine With Operator ( Small, Hand Operated ) 211 Iron Forming For Well ( Dia 3M, Height 75Cm ) With Tp, On Site, Removal After Stipulated Period 212 Cultivators More About This Source Textsource Text Required For Additional Translation Information
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
48.
Communications and Information Technology  #10431546 Price Bid
Tender For Misc Civil Repair Works In Qtr. No. T 20/3 At Atul Grove Road, New Delhi.; 1. Acrylic Emulsion Paint Asian (Royale), ICI (Velvet), Berger (Luxol Silk), Nerolac (Allscapes) 2. Premium Acrylic Smooth Exterior Paint Apex Ultima of Asian paints, Weather Coat All Guard of Berger Paint or equivalent. 3. Aluminium Composite Panel Alpolic, Aluco Bond, Reynobond, Euro bond, Al-stone, Aludecor. 4. Aluminium Extrusions Hindalco, Indalco, Jindal. 5. Aluminum Sections Hindalco, Indalco, Jindal. 6. Board & Plywood Duro, Green, Century. 7. Ceramic/Rectified Tiles Premium double charge tiles of: -Kajaria, RAK, HR Johnsons 8. CP fittings Hindware, Johnson, Marc, Cera. 9. CPVC Pipes Astral, Flowguard, Ashirvad, finolex, supreme 10. Designer coloured cement concrete floor tiles for external used / Concrete paver blocks. Ultra, Nitco, or Equivalent (mandatory tests to be performed before execution). 11. Epoxy Primer & Paints Berger, Pidilite, SIKO, Asian. 12. Float Glass Modi Float, Saint Gobain, Tata. 13. Flush Doors (ISI Mark only) Green, Duro, Century or Equivalent (mandatory tests to be performed before execution). 14. Galvanized/Stainless Steel Anchor Fasteners Arrow, Hilti, Fischer, Hatticth 15. Gun Metal Gate Valve Zoloto, Leader, SAINT 16. Gypsum Board False Ceiling Boral Gypsum, Gypsum India Limited, USG, St. Gobain (Gyproc) 17. Hardner Hard crete of Snowcem India, MC Deritop F.H. 18. Hydraulic Door Closer Hardwyn, Godrej, Dorma, Sandhu. 19. Hydraulic Floor spring Hardwyn, Godrej, Dorma, Sandhu. 20. Laminate Greenlam, Decolam, Century, Formica. 21. Melamine Polish Melamine Gold of Asian Paint, Wudfin of pidilite, Timbertone of ICI Dulux. 22. M. S. Pipe Electro Steel, Apollo (ISI), Jindal, Tata 23. Marine Plywood / BWP Ply Century, Green, Duro 24. Oil Bound Distemper Asian (Tractor), ICI (Maxi lite), Berger (Bison) Nerolac (NAD) 25. Sanitary fittings Parryware, Hindware, Cera, Johnson. 26. Plastic Connection Pipe Parryware, Kamal Delux. 27. Ply Wood Duroply, Green ply, Centurypoy 28. Pre-coated GI sheet for roofing Jindal Saw, Tata Blue Scope. 29. Polymer Modified Cementitious grout Bal-Endura, Pidilite, Ceco. 30. Pre-laminated Particle Board IS : 12823 (Gr-I, Type-II) Action TESA, Kitlam, Archid Ply, Asis, Green Lam 31. Primer Asian, ICI DuLux, Nerolac 32. PVC Rain Water Pipe & Fitting IS:13592 Type A Finolax, Supreme, Plasto. 33. PVC Shutter Rajshri, Sintex, Akal America. 34. PVC Tank (ISI Marked) Sintex, Star, Lotus, Plasto, Supreme. 35. R. C. C. Pipes (NP-2) ISI Make 36. Solid Plastic Seat Cover for EWC EWC standard seat cover white of Perryware/Hindware/ Neycer, Cera. 37. Stainless Steel Jindal Stainless Steel, Salem Steel 38. Stainless steel Sink with or without Draining board. Nirali, Hindware, Frankee, Cobra 39. Structural Silicon Sealant Dow Corning, Wacker, GE. 40. Structural steel section TATA, SAIL, RINL, Jindal. 41. Synthetic Enamel Paints ICI(Dulux), Asian (Apcolite), Berger (Luxol), Nerolac (NST) 42. Textured Exterior wall paint Snowcem, ICI dulux, Asian. 43. Towel Ring/Towel Rod/Towel Rack. Marc, Jaquar, 44. Tubular Section Windows M/S classic Engineers & Fabricator, Raipur, M/s JK Enterprises, Jaipur. 45. TMT Bars As per criteria laid down in Para 4.3 of Part-B 46. Vitrified Tiles First quality full body tiles of Orient Bell, Kajaria, RAK Ceramics, Johnson, NITCO, RESTILE. 47. Waste Pipe Kamal with brass checknut, Viking 48. Water Proofing Compound (Liquid) Pidiproof Ltd., Sico, Impermo 49. Wire mesh Sterling, Trimurty welded mesh. 50. White Cement JK, Birla etc 51. Wall Putty JK, BIRLA, Asian 52. Work Stations/ Modular Furniture Godrej, Wipro 53. Stoneware pipe and Gully Trap Perfect or equivalent 54. PVC flushing System Parryware, Johnson, Commander 55. Tactile Tiles Johnson or equivalent 56. Plastic Emulsion Paint Asian, ICI, Berger, Nerolac 1 By Mechanical Transport including loading, unloading and stacking 1.1 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - Item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. 15 cum 494.10 7412.00 2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 2.1 1:2:4 (1 Cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 1 cum 9895.20 9895.00 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 3.1 Cement mortar 1:6(1 cement : 6 coarse sand) 0.3 cum 9105.95 2732.00 4 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : 4.1 Red sand stone 3 sqm 1833.25 5500.00 5 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 5.1 Granite stone slab of colour black, Cherry/Ruby red 5.1.1 Area of slab over 0.50 sqm 2.1 sqm 5136.30 10786.00 6 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. 3.5 metre 568.55 1990.00 7 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 7.1 Wedge expansion type 7.1.1 Fastener with threaded dia 10 mm 20 each 40.00 800.00 8 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 40 sqm 1267.95 50718.00 9 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.1 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 5 sqm 2172.10 10861.00 9.2 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws 10 sqm 2093.70 20937.00 10 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 10.1 Fixed to steel windows by welding 100 kg 219.10 21910.00 11 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 11.1 300x16 mm 6 each 216.55 1299.00 12 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 12.1 200x10 mm 6 each 69.40 416.00 13 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 13.1 125 mm 6 each 39.95 240.00 14 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 14.1 1.0 mm thick 30 sqm 897.30 26919.00 15 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 60 kg 117.35 7041.00 16 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Assistant Engineer Contractor Page 42 of 47 16.1 Using flats 30x6 mm for diagonal bracbraces and central cross piece 2.2 sqm 5563.75 12240.00 17 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 17.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 60 kg 141.70 8502.00 18 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ LType sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 18.1 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 80 kg 181.25 14500.00 19 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. 19.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides 4 sqm 844.70 3379.00 20 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 20.1 4.0 mm thick glass panes 4 sqm 1064.65 4259.00 21 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 45 sqm 1330.00 59850.00 22 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 22.1 110 mm diameter 12 metre 377.40 4529.00 23 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. 23.1 Single tee without door 23.1.1 110x110x110 mm 4 each 221.35 885.00 23.2 Bend 87.5° 23.2.1 110 mm bend 4 each 150.35 601.00 24 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 100 sqm 156.05 15605.00 25 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 25.1 One or more coats on old work 100 sqm 102.80 10280.00 26 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 26.1 With cement mortar 1:4 (1cement: 4 coarse sand) 10 sqm 560.50 5605.00 27 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 27.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 1.5 sqm 1090.65 1636.00 28 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. 1 each 134.10 134.00 29 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 29.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 1 cum 2434.25 2434.00 30 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 30.1 Of area 3 sq. metres and below 4 each 367.20 1469.00 31 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 2.2 sqm 266.45 586.00 32 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 40 sqm 54.65 2186.00 33 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 33.1 W.C. pan with ISI marked white solid plastic seat and lid 1 each 6515.55 6516.00 34 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: 34.1 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 1 each 1879.20 1879.00 35 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 35.1 Kitchen sink without drain board 35.1.1 610x510 mm bowl depth 200 mm 1 each 4940.80 4941.00 36 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 1 each 349.15 349.00 37 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 37.1 Flexible pipe 37.1.1 32 mm dia 2 each 119.55 239.00 38 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 1 each 1607.95 1608.00 39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 39.1 20 mm nominal dia Pipes 15 metre 335.00 5025.00 40 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 40.1 20 mm nominal dia Pipes 25 metre 537.60 13440.00 41 Providing and fixing uplasticised PVC connection pipe with brass unions : 41.1 45 cm length 41.1.1 15 mm nominal bore 3 each 97.75 293.00 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 500 per litre 11.00 5500.00 43 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 43.1 15 mm nominal bore 4 each 798.95 3196.00 44 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 44.1 15 mm nominal bore 6 each 574.30 3446.00 45 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 45.1 15 mm nominal bore, 105 mm long, weighing not less than 138 gms 1 each 182.10 182.00 46 Strengthening of damaged RCC celing after removing the loose concrete & clean the surface with water and wire brush after that applying a thick layer of cement slurry and providing PCC 1:1.5:3 (1 cement :1.5 coarse sand : 3 stone aggregate of 12.5 mm nominal size)in two layers each of 25 mm average thickness by applying a coat of neat cement slurry before each layer of cement concrete with a suitable time gap for proper setting/hardening and finally finish with 12 mm thick cement plaster of 1:3 ( 1 cement : 3 fine sand) etc all complete as per direction of Engineer in Charge. 4 sqm 1449.64 5799.00 47 Credit of material received from dismantling old damaged wooden door 4 each -249.93 -1000.00 48 Credit of material received from dismantling Steel scrap 20 kg -24.99 -500.00 49 Uprooting & removal of wild growth of vegetation on terrace, walls, drainage system and water supply system with proper treatment with chemicals i/c repairing of walls i/c charges of labour ,T&P and material I/C scaffolding system all height etc complete as per direction of Engineer in charge. 4 each 431.82 1727.00 50 Providing and fixing GI tank nipple of 15mm nominal dia of approved quality all complete as per Engineer in Charge. 2 each 321.59 643.00 51 Repair of steel doors, windows or clerestory windows by welding i.e. necessary hinges , flats etc where ever complete and making them functional by scrapping plaster, oiling, greasing, welding of broken hinges, upto five floors as per direction of Engineer in charge. 4 each 383.97 1536.00 52 Providing & fixing door interlock on MS door by welding all complete as per direction of Engineer in charge. 1 each 1238.12 1238.00 53 Providing and fixing 1mm thick aluminium sheet on the back side of door to prevent the door from seepage including fixing nails etc as per direction of EIC. 2 sqm 412.14 824.00 54 Credit of material received from dismantling old damaged water tank of capacity upto 1000ltrs. 1 each -126.28 -126.00 55 Providing and fixing stainless steel grating round of 100mm dia of approved quality all complete as per Engineer in Charge. 2 each 184.94 370.00 56 Providing and fixing 110 mm diameter unplasticised Rigid PVC (working pressure 6 kg/ cm 2) soil, waste and vent pipes water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 4 metre 557.85 2231.00 57 Providing and fixing 110 mm unplasticised PVC moulded bend (working pressure 6 kg/ cm2) soil, waste and vent pipes water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 2 each 377.77 756.00 58 Providing and fixing CPVC Union 20 mm nominal bore of approved quality & make and as per the direction of Engineer-in-charge. 6 each 211.10 1267.00 59 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Two or more coats old work 250 sqm 113.02 28255.00
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Delhi View Result →
49.
Communications and Information Technology  #10431457 Price Bid
Misc. Civil Works And Internal Finishing In Qtr. No. C-107, Vevik Vihar, Delhi.; 1. Acrylic Emulsion Paint Asian (Royale), ICI (Velvet), Berger (Luxol Silk), Nerolac (Allscapes) 2. Premium Acrylic Smooth Exterior Paint Apex Ultima of Asian paints, Weather Coat All Guard of Berger Paint or equivalent. 3. Aluminium Composite Panel Alpolic, Aluco Bond,Reynobond, Euro bond, Al-stone, Aludecor. 4. Aluminium Extrusions Hindalco, Indalco, Jindal. 5. Aluminum Sections Hindalco, Indalco, Jindal. 6. Board & Plywood Duro, Green, Century. 7. Ceramic/Rectified Tiles Premium double charge tiles of :-Kajaria, RAK, HR Johnsons 8. CP fittings Hindware, Johnson, Marc, Cera. 9. CPVC Pipes Astral,Flowguard, Ashirvad, finolex,supreme 10. Designer coloured cement concrete floor tiles for external used / Concrete paver blocks. Ultra, Nitco, or Equivalent(mandatory tests to be performed before execution). 11. Epoxy Primer & Paints Berger, Pidilite, SIKO, Asian. 12. Float Glass Modi Float, Saint Gobain, Tata. 13. Flush Doors (ISI Mark only) Green, Duro, Century or Equivalent (mandatory tests to be performed before execution). 14. Galvanized/Stainless Steel Anchor Fasteners Arrow, Hilti, Fischer, Hatticth 15. Gun Metal Gate Valve Zoloto, Leader, SAINT 16. Gypsum Board False Ceiling Boral Gypsum, Gypsum India Limited, USG, St. Gobain(Gyproc) 17. Hardner Hard crete of Snowcem India, MC Deritop F.H. 18. Hydraulic Door Closer Hardwyn, Godrej, Dorma, Sandhu. 19. Hydraulic Floor spring Hardwyn, Godrej, Dorma, Sandhu. 20. Laminate Greenlam, Decolam, Century, Formica. 21. Melamine Polish Melamine Gold of Asian Paint, Wudfin of pidilite, Timbertone of ICI Dulux. 22. M. S. Pipe Electro Steel, Apollo (ISI), Jindal, Tata 23. Marine Plywood / BWP Ply Century, Green, Duro 24. Oil Bound Distemper Asian (Tractor), ICI (Maxi lite), Berger(Bison), Nerolac (NAD) 25. Sanitary fittings Parryware, Hindware, Cera, Johnson. 26. Plastic Connection Pipe Parryware, Kamal Delux . 27. Ply Wood Duroply, Green ply, Centurypoy 28. Pre-coated GI sheet for roofing Jindal Saw, Tata Blue Scope. 29. Polymer Modified Cementitious grout Bal-Endura, Pidilite, Ceco. 30. Pre-laminated Particle Board IS : 12823 (Gr-I, Type-II) Action TESA, Kitlam, Archid Ply, Asis, Green Lam 31. Primer Asian, ICI DuLux, Nerolac 32. PVC Rain Water Pipe & Fitting IS:13592 Type A Finolax, Supreme, Plasto. 33. PVC Shutter Rajshri, Sintex, Akal America. 34. PVC Tank (ISI Marked) Sintex, Star, Lotus, Plasto, Supreme. 35. R. C. C. Pipes (NP-2) ISI Make 36. Solid Plastic Seat Cover for EWC EWC standard seat cover white of Perryware/Hindware/ Neycer, Cera. 37. Stainless Steel Jindal Stainless Steel, Salem Steel 38. Stainless steel Sink with or without Draining board. Nirali, Hindware, Frankee, Cobra 39. Structural Silicon Sealant Dow Corning, Wacker, GE. 40. Structural steel section TATA, SAIL, RINL, Jindal. 41. Synthetic Enamel Paints ICI(Dulux),Asian (Apcolite),Berger (Luxol),Nerolac (NST) 42. Textured Exterior wall paint Snowcem, ICI dulux, Asian. 43. Towel Ring/Towel Rod/Towel Rack. Marc, Jaquar, 44. Tubular Section Windows M/S classic Engineers & Fabricator, Raipur, M/s JK Enterprises, Jaipur. 45. TMT Bars As per criteria laid down in Para 4.3 of Part-B 46. Vitrified Tiles First quality full body tiles of Orient Bell, Kajaria, RAK Ceramics, Johnson, NITCO, RES TILE. 47. Waste Pipe Kamal with brass checknut,Viking 48. Water Proofing Compound (Liquid) Pidiproof Ltd., Sico, Impermo 49. Wire mesh Sterling, Trimurty welded mesh. 50. White Cement JK, Birla etc 51. Wall Putty JK, BIRLA, Asian 52. Work Stations/ Modular Furniture Godrej, Wipro 53. Stoneware pipe and Gully Trap Perfect or equivalent 54. PVC flushing System Parryware, Johnson, Commander 55. Tactile Tiles Johnson or equivalent 56. Plastic Emulsion Paint Asian, ICI, Berger, Nerolac 1 By Mechanical Transport including loading,unloading and stacking (a) Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 2.83 cum 494.10 1398.00 2 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : (a) 30 mm thick shutters (a.1) 9.27.2.2 With ISI marked stainless steel butt hinges of required size 3 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (a) 250x16 mm 2 each 260.60 521.00 4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (a) 150x10 mm 4 each 82.55 330.00 5 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (a) 100 mm 4 each 59.55 238.00 6 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 9 metre 570.95 5139.00 7 Providing and fixing to existing door frames. (a) 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. 3 sqm 3720.75 11162.00 8 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (a) Hot finished welded type tubes 24.5 kg 194.40 4763.00 9 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 41.8 kg 172.60 7215.00 10 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. (a) Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides 1.89 sqm 844.70 1596.00 11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 4.98 sqm 1096.55 5461.00 12 Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (a) Double charge vitrified tile polished finish of size (a.1) Size of Tile 600 x 600 mm 19.8 sqm 1453.65 28782.00 13 Providing and laying Vitrified tiles in diferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (a) Size of Tile 600x600 mm 3.78 sqm 1623.05 6135.00 14 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (a) 110 mm diameter 3.5 metre 377.40 1321.00 15 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. (a) Single tee with door (a.1) 110x110x110 mm 2 each 234.15 468.00 (b) Bend 87.5° (b.1) 110 mm bend 2 each 150.35 301.00 16 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (a) 110 mm 2 each 371.30 743.00 17 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : (a) Two or more coats on new work 4.8 sqm 155.90 748.00 18 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 50 sqm 156.05 7803.00 19 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (a) Two coats 200 sqm 137.45 27490.00 20 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 50 sqm 25.15 1258.00 21 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (a) One or more coats on old work 60 sqm 102.80 6168.00 22 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (a) With cement mortar 1:4 (1cement: 4 coarse sand) 11.25 sqm 560.50 6306.00 23 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 1.35 sqm 1090.65 1472.00 24 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : (a) Of area 3 sq. metres and below 2 each 143.50 287.00 25 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (a) For thickness of tiles 10 mm to 25 mm 20.4 sqm 73.40 1497.00 26 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required: (a) White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests 1 each 6767.40 6767.00 27 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require: (a) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 1 each 1879.20 1879.00 28 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink asper IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making goodthe walls wherever required : (a) Kitchen sink without drain board (a.1) 610x460 mm bowl depth 200 mm 1 each 3873.80 3874.00 29 Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. (a) Semi rigid pipe (a.1) 32 mm dia 1 each 103.90 104.00 30 Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete. 1 each 1607.95 1608.00 31 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (a) 20 mm nominal dia Pipes 12 metre 335.00 4020.00 32 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls (a) 20 mm nominal dia Pipes 10 metre 537.60 5376.00 33 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (a) 15 mm nominal bore 1 each 406.85 407.00 34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 500 per litre 11.00 5500.00 35 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : (a) 15 mm nominal bore 2 each 506.80 1014.00 36 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (a) 15 mm nominal bore 2 each 798.95 1598.00 37 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (a) 15mm nominal bore 5 each 574.30 2872.00 38 Providing and fixing PTMT grating of approved quality and colour. (a) Circular type (a.1) 100 mm nominal dia 3 each 37.60 113.00 39 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. (a) 15 mm nominal bore with 45 cm length 2 each 121.90 244.00 40 Credit to unservicable materials recevied from dismantling: a)Old damaged unserviceable door with frame i/c fittings. 2 each -288.96 -578.00 41 Credit for unserviceable Material obtained at site after dismantling /demolishing. (a) Old MS/GI steel/CI/ Steel scraps. etc. 70 kg -25.28 -1770.00
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Delhi View Result →
50.
Drinking Water Supply and Sanitation #10286078 Price Bid
Fixing Of Rate Contract For Repairs / Replacement To Electrical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Pampore ( District Pulwama ) For The Financial Year 2021-22- 1 Providing, fitting and testing of Copper thimbles at site 2 1. 10 Sq. mm 3 2. 16 Sq. mm 4 3. 25 Sq. mm 5 4. 50 Sq. mm 6 5. 90 Sq. mm 7 6. 120 Sq. mm 8 7. 150 Sq. mm 9 Providing, fitting and testing of Aluminum thimbles at site 10 1. 10 Sq. mm 11 2. 16 Sq. mm 12 3. 25 Sq. mm 13 4. 50 Sq. mm 14 5. 90 Sq. mm 15 6. 120 Sq. mm 16 7. 150 Sq. mm 17 Providing, fitting of below mentioned item for repairs to 25KVA to 50 KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 18 Copper wire of specific gauge for fabrication of primary / secondary coil 19 Bush rod with porcelain insulator and packing 20 Rewinding/Re-taping /re-insulation of coils 21 T-Oil 22 Copper strip 23 Filtration / dehydration of T-oil 24 Cost of scrap copper dismattled windings 25 Cost of damaged lamination 26 Providing, fitting of below mentioned item for repairs to 50KVA -100 KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 27 Copper wire of specific gauge for fabrication of primary / secondary coil 28 Bush rod with porcelain insulator and packing 29 Rewinding/Re-taping /re-insulation of coils 30 T-Oil 31 Copper strip 32 Filtration / dehydration of T-oil 33 Cost of scrap copper dismattled windings 34 Cost of damaged lamination 35 Providing, fitting of below mentioned item for repairs to 100 KVA - below 150 KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 36 Copper wire of specific gauge for fabrication of primary / secondary coil 37 Bush rod with porcelain insulator and packing 38 Rewinding/Re-taping /re-insulation of coils 39 T-Oil 40 Copper strip 41 Filtration / dehydration of T-oil 42 Cost of scrap copper dismattled windings 43 Cost of damaged lamination 44 Providing, fitting of below mentioned item for repairs to 150 KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 45 Copper wire of specific gauge for fabrication of primary / secondary coil 46 Bush rod with porcelain insulator and packing 47 Rewinding/Re-taping /re-insulation of coils 48 T-Oil 49 Copper strip 50 Filtration / dehydration of T-oil 51 Cost of scrap copper dismattled windings 52 Cost of damaged lamination 53 Providing, fitting of below mentioned item for repairs to 200KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 54 Copper wire of specific gauge for fabrication of primary / secondary coil 55 Bush rod with porcelain insulator and packing 56 Rewinding/Re-taping /re-insulation of coils 57 T-Oil 58 Copper strip 59 Filtration / dehydration of T-oil 60 Cost of scrap copper dismattled windings 61 Cost of damaged lamination 62 Providing, fitting of below mentioned item for repairs to 250KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 63 Copper wire of specific gauge for fabrication of primary / secondary coil 64 Bush rod with porcelain insulator and packing 65 Rewinding/Re-taping /re-insulation of coils 66 T-Oil 67 Copper strip 68 Filtration / dehydration of T-oil 69 Cost of scrap copper dismattled windings 70 Cost of damaged lamination 71 Providing, fitting of below mentioned item for repairs to Voltage regulator (plate type switch) including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 72 1. 150mmx150mm 73 2. 225mm x 225mm 74 3. 200mm x 200mm 75 4. 250mm x 250mm 76 1. 300mmx300mm 77 2. 350mm x 350mm 78 3. 400mm x 400mm 79 4. 450mm x 450mm 80 Providing, fitting of below mentioned item for repairs to Voltage regulator (drum type switch) including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 81 1. 32A 82 2. 63A 83 3. 100A 84 4. 200A 85 Providing, fitting and testing of Voltmeters at site 86 Analog 0-200V 87 Analog 0-500V 88 Digital 0-500V 89 Providing, fitting and testing of Ammeters at site 90 1. 0-50A with CT ratio of 5/50 Analog 91 2. 0-100A with CT ratio of 5/100 Analog 92 3. 0-150A with CT ratio of 5/150 Analog 93 4. 0-200A with CT ratio of 5/200 Analog 94 0-200A Digital 95 Providing, fitting and testing of post type drop out set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 96 Suitable for 25KVA SS 97 Suitable for 63KVA SS 98 Suitable for 100KVA SS 99 Suitable for 250KVA SS 100 Suitable for 400KVA SS 101 Providing, fitting and testing of link set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 102 Suitable for 25KVA SS 103 Suitable for 63KVA SS 104 Suitable for 100KVA SS 105 Suitable for 250KVA SS 106 Suitable for 400KVA SS 107 Providing, fitting and testing of submersible copper cables of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 108 1. 10 sq mm 109 2. 16 sq mm 110 3. 25 sq mm 111 3. 35 sq mm 112 Providing, fitting and testing of copper cables of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 113 1. 19/0.0064 114 2. 37/0.083 115 3. 61/0.093 116 4. 19/0.044 117 7/16.00 118 Providing, fitting and testing of 3.5 core XLPE aluminum conductor of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 119 1. 35 Sq. mm 120 2. 50 Sq. mm 121 3. 70 Sq. mm 122 3. 95 Sq. mm 123 4. 120 Sq. mm 124 5. 185 Sq. mm 125 Providing, fitting and testing of 11KV post type lightening arrestor including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 126 Providing, fitting and testing of G.O.D set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 127 Providing, fitting and testing of Cross arms including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 128 1. Channels 75x40 AND Channels 100 x 50 129 2. Angle iron support 130 3. F-top 131 4. U Clamps 132 5. Guy-wire with turn buckle 133 6. Guy-Insulator 134 Providing, fitting and testing of ACSR Conductor including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 135 1. 0.03 136 2. 0.05 137 Providing, fitting and testing of MCCBs (04 Pole) including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 138 63 Amps 139 100 Amps 140 125 Amps 141 160 Amps 142 200 Amps 143 250 Amps 144 320 Amps 145 400 Amps 146 630 Amps 147 Providing, fitting and testing of MCCBs (03 Pole) including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 148 63amps 149 100amps 150 125amps 151 160amps 152 200Amps 153 Providing, fitting and testing of Change over switch including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site. 154 63 A 155 100 A 156 200 A 157 300 A 158 400 A 159 630 A 160 Providing, fitting and testing of Combined volt-ammeter for MU-G starters 161 30A 162 60A 163 75A 164 100A 165 125A 166 Providing, fitting and testing of 415V Indicating lamps 167 Red/Yellow/Green 168 Providing, fitting and testing of 415V Single phase preventor 169 Providing, fitting and testing of ML contactors for starters 170 ML 1.5 171 ML 2 172 ML 3 173 ML 4 174 ML 6 175 ML 10 176 ML 12 177 Providing, fitting and testing of Power contactors for FASD starters 178 LCIF 400 179 LCIF 650 180 LCIF 350 181 CK 95 BE-300 182 MNX 185 183 MNX 325 184 AC3-25A 185 AC3-32A 186 AC3-40A 187 AC3-50A 188 MC X 70 189 AC3- 60A 190 AC3- 63A 191 AC3- 80A 192 AC3- 100A 193 AC3- 115A 194 AC3- 125A 195 AC3- 150A 196 AC3- 185A 197 AC3- 200A 198 Providing, fitting and testing of ML relays 199 ML1 range 4-6.5 200 ML1 range 6-10 201 ML1 range 10-16 202 ML2/ML3 9-14 203 ML2/ML3 13-21 204 ML2/ML3 20-32 205 ML2/ML3 28-42 206 Providing, fitting and testing of FASD Panel accessories 207 Electronic timer 0- 30Sec 208 Electronic timer 0- 60Sec 209 Single Phase Preventer(Three phase type ) 210 Overload relay 4A-6A 211 Overload relay 5A-8A 212 Overload relay 6A-9A 213 Overload relay 7A-10A 214 Overload relay 9A-13A 215 Overload relay 12A-16A 216 Overload relay 14A-22A 217 Overload relay 17A-25A 218 Overload relay 23A-32A 219 Overload relay 30A-40A 220 Overload relay 37A-50A 221 Overload relay 48A-65A 222 Overload relay 55A-70A 223 Overload relay 63A-80A 224 Overload relay 80A-93A 225 Overload relay 85A- 105A 226 Overload relay 80A- 115A 227 Overload relay 125A- 200A 228 Overload relay 160A- 250A 229 Overload relay 200A- 315A 230 Replacement of damaged 1 Sq mm copper power wiring 231 Providing, fitting and testing of ATS star Delta starter 232 Pneumatic timer (on delay/off delay) 233 Electromagnetic power contactor assembly (10A-250A) 234 Providing, fitting and testing of Contact points for star/delta starters 235 20HP 236 30HP 237 40HP 238 50HP 239 Providing, fitting and testing of Terminal block 240 30A-5 way 241 60A-3way 242 60A-6 way 243 100A-3 way 244 120A-3 way 245 Providing, fitting and testing of Power contactor for MU-G starters 246 MU-G10 247 MU-G15 248 MU-G20 249 MU-G30 250 MU-G40 251 MU-G50 252 MU-G75 253 Providing, fitting and testing of Overload relay/under voltage relay/single phase preventer/Timer for MU-G starters 254 MU-G10 255 MU-G15 256 MU-G20 257 MU-G30 258 MU-G40 259 MU-G50 260 MU-G75 261 Providing, fitting and testing of single phase preventer/Timer for MU-G starters 262 MU-G10 263 MU-G15 264 MU-G20 265 MU-G30 266 MU-G40 267 MU-G50 268 MU-G75 269 Providing and fitting of Air Circuit breaker 800 amp Manual Draw out type 270 Providing and fitting of Multi-Function Meter Square Dial type 271 Providing, fitting and testing of Motor protection circuit breakers with thermal adjustable ranges from 0-100 amp 272 0-32 Amp (16 steps) 273 28-63 Amp (03 steps) 274 55-100 Amp (03 steps) 275 Nuts and bolts of different size 276 Selector Switch 277 Providing, fitting of below mentioned item for repairs to 10KVA to 50KVA Servo Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 278 Copper wire of specific gauge for fabrication of primary / secondary coil 279 Bush rod with porcelain insulator and packing 280 Rewinding/Re-taping /re-insulation of coils 281 T-Oil 282 Copper strip 283 Filtration / dehydration of T-oil 284 Cost of scrap copper dismattled windings 285 Replacement of digital micro controlled processor based control card 286 Replacement of AC syncronous servo motor 287 Replacement of copper wound motorized auto transformer 288 Replacement of buck and boost series transformer 289 Providing, fitting of below mentioned item for repairs to 50KVA to 100KVA Servo Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site. 290 Copper wire of specific gauge for fabrication of primary / secondary coil 291 Bush rod with porcelain insulator and packing 292 Rewinding/Re-taping /re-insulation of coils 293 T-Oil 294 Copper strip 295 Filtration / dehydration of T-oil 296 Cost of scrap copper dismattled windings 297 Replacement of digital micro controlled processor based control card 298 Replacement of AC syncronous servo motor 299 Replacement of copper wound motorized auto transformer 300 Providing, fitting of Outdoor type LED Lamp 301 25Watt 302 45Watt 303 48Watt 304 50Watt 305 60Watt 306 90Watt 307 100Watt 308 120Watt 309 Repairs to LED lights at site by way of replacing strips 310 25Watt 311 45Watt 312 48Watt 313 50Watt 314 60Watt 315 90Watt 316 100Watt 317 120Watt 318 Erection of MS tubular 9m/11m tilted pole by way of excavation of new trench and concrete bottoming including fitting/fixing of Departmental ACSR conductor on the insulators 319 Repairs to VT Motor with rating above 50HP to 150HP)Dismantling of the VT motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 320 Copper wire used in rewinding the motor. 321 Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. 322 Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc 323 Cost of scrap copper dismanttled windings 324 Repairs to horizontal Motor with rating from 5HP to 50HPDismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 325 Copper wire used in rewinding the motor. 326 Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. 327 Providing/fitting of connection platefor Horizontal motors from 05HP to 50 HP 328 Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc 329 Cost of scrap copper dismanttled windings 330 Repairs to horizontal Motor with rating above 50HP to 100HP)Dismantling of the horiontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 331 Copper wire used in rewinding the motor. 332 Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. 333 Providing/fitting of connection platefor Horizontal motors from 05HP to 50 HP 334 Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc 335 Cost of scrap copper dismanttled windings 336 Repairs to borewell submersible Motor with rating from and above 5HP to 25HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 337 Copper wire used in rewinding the motor. 338 Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. 339 Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc 340 Cost of scrap copper dismanttled windings 341 Cost for replacement of thrust bearing Racer Ratchet 342 Cost on account of replacement of gun metal bushes 343 Repairs to borewell submersible Motor with rating from and above 25HP to 50HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 344 Copper wire used in rewinding the motor. 345 Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. 346 Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc 347 Cost of scrap copper dismanttled windings 348 Cost for replacement of thrust bearing Racer Ratchet 349 Cost on account of replacement of gun metal bushes 350 Repairs to borewell submersible Motor with rating from and above 50HP to 75HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 351 Copper wire used in rewinding the motor. 352 Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. 353 Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc 354 Cost of scrap copper dismanttled windings 355 Cost for replacement of thrust bearing Racer Ratchet 356 Cost on account of replacement of gun metal bushes 357 Repairs to open well submersible Motor with rating from and above 5HP to 25HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 358 Copper wire used in rewinding the motor. 359 Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. 360 Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc 361 Cost of scrap copper dismanttled windings 362 Cost for replacement of thrust bearing Racer Ratchet/ Mechanical Seal 363 Cost on account of replacement of gun metal bushes/Bearings 364 Cost of Cooling Oil 365 Repairs to open well submersible Motor with rating from and above 25HP to 50HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 366 Copper wire used in rewinding the motor. 367 Rewinding,Skilled labor, insulated paper and sleeves used during rewinding and testing of motor at site. 368 Cost on account of associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc 369 Cost of scrap copper dismanttled windings 370 Cost for replacement of thrust bearing Racer Ratchet/ Mechanical Seal 371 Cost on account of replacement of gun metal bushes/Bearings 372 Cost of Cooling Oil 373 Replacing of damages illumination single core multistranded copper wiring 374 Providing/fitting of AVR Relayto DG set as per sample (25 KVA to 62.5KVA) 375 Providing/fitting of AVR Relay to DG set as per sample (62.5 KVA to 162.5KVA) 376 Repair and rewinding of DG set cooling fan 377 Minor Repair to wiring of DG Set 378 Providing/fitting of Battery connection leads with copper connectors 379 Replacing of damages illumination single core multistranded copper wiring 380 Replacement of damaged electrification and electrification of pump house including cost of channels/conduits, fitting charges, transportation and testing on load at site 381 Lighting points in 1.0mm2 copper wire including 5W LED lamp 382 Heating points in 2.5 mm2 copper wire including 16Amp SS combined 383 Providing of 5W/7W LED lamp 384 Providing/fitting of Steel coupling for submersible motors from 05HP to 50 HP including cotter 385 Repairs to the rotor/body, fan, shield of Horizontal motor 386 Repairs to self / Dynamo of DG set
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Jammu And Kashmir View Result →
TenderDetail
Loading tenders