View Bid Results For Air Sampling Pump Tenders

We found 213 Bid Results related to air sampling pump tenders. You can find Contractor details who won air sampling pump tenders along with contract details in Bid awards announcements section.

Indian Tenders
6
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
158
39
16
Tender Publishing Platform
37
176
State / UT
30
36
25
19
17
17
15
12
9
9
8
8
5
4
4
3
3
3
2
2
2
1
1
1
1
1
1
1
1
1
1
Contract Value
65
30
73
41
Publish Date
0
0
0
0
0
Sector
21
57
35
23
20
12
11
9
7
6
6
5
4
4
3
3
2
2
1
1
1
1
Ownership
5
124
43
26
17
3
Within keyword
Active filters:
Showing 1–5 of 213 tenders matching your filters
1.
Health and Family Welfare #11430568 Technical Bid
Tender for Pruchase Of Surgical And Sutures Items At Govt Hospital Bundi , Surgical And Sutures , Absorbable Gelatin Sponge Ip 66, Size 80(+-10) Mm X 50 Mm X 10 Mm Should Be Sterlized. , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set / Blood Transfusion Set • Sharp And Easy Piercing Spike Suitable For Blood Bags And Standard Blood Containers • Transparent Cylindrical Drip Chamber With Filter.Filter Size Should Be 200+20 Micrometer. • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Transfusion Rate • Should Conform To Is 9824(Part 3):1996 , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powdered,,Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards , Suction Catheter, Sterile. Size: Fg 5 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 6 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 8 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 10 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 12 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 14 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 16 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 18 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 20 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 22 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 8 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size10 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size16 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size18 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size20 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size22 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 24 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Infant Feeding Tube Size:10Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:8Fg, Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:5Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Sterile Disposable Perfusion Set With Airway And Needle (Adult Use) • For Gravity Feed Only • Sharp And Easy Piercing Spike With Air Vent • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Self Sealing Latex Bulb Which Will Also Act As An Port For Extra Medication • Efficient Roller Clamp To Control And Adjust The Fluid Rate • 21 G Needle • Should Conform To Is 12655 -4 Standard , Sterile Disposable Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use) • Burette Type Measured Volume Chamber Of 100 Ml • Drop Size Of Approx 60 Drops Per Ml • Injection Port,Latexfree, For Intermittent Medication. • Floating Auto Shut Off Valve (Latex Free) In Burette. • Soft And Kink Resistant Pvc Tubing. • Roller Controller For Flow Control • Tube Length 150 Cm • 23G Needle • Should Conform To Iso 8536-5 , Sterile Disposable Infusion Set With Microdrip (I.V.) • Microdrip Infusion Set With Drop Size Reduced To Approx 60 Drops Per Ml • Sharp And Easy Piercing Spike • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Fluid Rate • Should Conform To Is 12655 - 4 Standard , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conform To Is 12227 , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 16G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 20G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 22G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port. Size 24G • Suitable For Paediatric & Neonatal Use • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Mucus Extractor Sterile • Clear Transparent Container • Antibacterial Filter • Soft, Kink Resistant Pvc Tubing • Tube Size 10 Fg; Length 40 Cm (Min.) • Capacity 25 Ml , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Adult) • Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Pediatrics) • Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Paper Adhesive Plaster 1 X 9.0 Mts (With Cutter) • Non Woven. • Non Allergic & Strong Adhesive But Gentle To Skin. • Painless Removal. • Porous And Breathable. Paper Adhesive Plaster Should Conform To The Standards And Test Prescribed In Applicable Is And Bp Standard. , Paper Adhesive Plaster 2 X 9.0 Mts (With Cutter) • Non Woven. • Non Allergic & Strong Adhesive But Gentle To Skin. • Painless Removal. • Porous And Breathable. Paper Adhesive Plaster Should Conform To The Standards And Test Prescribed In Applicable Is And Bp Standard. , Paper Adhesive Plaster 3 X 9.0 Mts (With Cutter) • Non Woven. • Non Allergic & Strong Adhesive But Gentle To Skin. • Painless Removal. • Porous And Breathable. Paper Adhesive Plaster Should Conform To The Standards And Test Prescribed In Applicable Is And Bp Standard. , Plaster Of Paris Bandages 15Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Plaster Of Paris Bandages 10Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 10 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 12 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 14 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 16 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 18 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Scalp Vein Set (Disposable): Size 18G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 20G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 22G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 24G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 2 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 5 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 10 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 20 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Surgical Blade Sterile, Size 11 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 15 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 22 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Disposable Spinal Needle For Single Use 22G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Sterile Disposable Spinal Needle For Single Use 25G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Urine Collecting Bag, Disposable 2000 Ml • Transparent Sheet • Kink Resistant Flexible Tubing Not Less Than 90 Cm In Length • Should Have Non-Return Valve • Top Drainage Outlet • Graduated Bag • Moulded Handle For Easy Handling , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Endotracheal Tube, Plain - Size 2.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain With Radio-Opaque Line, Sterile, Single Use - Size 6Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 6.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Cuffed - Size 4Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 4.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 9 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Tracheostomy Tube (Pvc), Plain, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line , Tracheostomy Tube (Pvc), Cuffed, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line • Balloon With Non Return Valve , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 24) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 28) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 32) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.5 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Sterilised Umbilical Cotton Tape Width 3 Mm, Length 75 Cm Should Conform To Schedule F(Iii) Of Drug And Cosmetic Act 1940 , Bone Wax Sterilised , Skin Graft Knife Blade (Sterile) (Disposable ) Skin Grafting Knife Blade (Sterile) Made Of Carbon Steel Or Stainless Steel Material 158 Mm Long Individually Wrapped In Wrapper Corrosion Inhibitor Paper In Single Packet,.In Packs Of 10. The Edge Must Be Sharp Enough To Cut The Skin In A Single Shave And Should Snugly Fit In The Handle Should Conform To Is 3759. 2. Skin Grafting Knife Handle (Watson Modification Of HumbyS Knife ) Stainless Steel, Ce Certified, In Which The Blade Specified In (A) Above Should Fit Snugly. Should Conform To 7980-1976. , K Wire, Length 375 Mm; 1Mm Length Of Wire Should Be Mentioned With Specification. Should Conform To Is 8261 , K Wire, Length 375 Mm;1.6Mm • Length Of Wire Should Be Mentioned With Specification. • Should Conform To Is 8261 , K Wire, Length 375 Mm; Size 1.8Mm • Length Of Wire Should Be Mentioned With Specification. •Should Conform To Is 8261 , Face Mask, Disposable • Should Be Manufactured From Non Woven Poly Prop Fabric • Should Be 3 Ply Construction • Should Have High Bacterial Filtration Efficiency • Should Be Heat Sealed To Keep 3 Layers Together • Standard Size 17.5 X9 Cm • Color Green/Blue • There Should Be A String Each At All Four Corners,Length Of String Should Be 40Cm • Nose Clip Should Be There • No Elastic Band. , Surgical Cap, Disposable (For Surgeons) • Should Be Manufactured From Non Woven Fabric. • Strip For Tying The Cap Stitched On The Back For Proper Grip On The Forhead. • Green Colour • Ultrasonically Stitched • Air Permeable/Breathable • Should Retain Skin And Hair Particle. • Strip For Tying The Cap , Surgical Cap, Disposable ( For Nurses) • Should Be Manufactured From Non Woven Fabric • Blue / Green Colour • Round Upon Wearing, With Elastic • Air Permeable / Breathable • Should Retain Skin And Hair Particles , Foldable Intra Ocular Lense With Injector (Size + 11 D To +17.5 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 11 D To +17.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 18 D To + 24 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 18 D To + 24 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 24.5 D To + 28.5 D ) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 11 D To +17.5 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 11 D To +17.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 18 D To + 24 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 18 D To + 24 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 24.5 D To + 28.5 D ) 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Bioconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powdered,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powder Free,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Extra Small. Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Small Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Medium Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Large Should Conform To Is 15354 , Pressure Monitoring Line / High Pressure Extension Line • Suitable For High Pressure Monitoring And For Connection Between Syringe Infusion Pump And Patient • Male Luer Lock At One End And Female Luer Lock At Other End ; Should Fit All Standard Equipment. Luer Lock Connectors Should Provide Secure Fitting. • Pressure Upto 800 Psi • Length 200 Cm • Sterile , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml • Should Have Suitability For Both Male And Female Patients • Should Be Provided With Adhesive For Fixation And Good Grip With Minimal Risk Of Allergy And Injury • Capacity 100 Ml • Sterile , Umbilical Catheter (For New Born) All Sizes • Radio Opaque Line • With Female Flexible Mount • Colour Coded Connector • Open Tip Should Be Soft, Rounded, Atraumatic • Length 40 Cm , Umbilical Cord Clamp • Suitable For Clamping Umbilical Cord Of New Born • Security Lock To Prevent Accidental Opening After Clamping • Grooved Clamping Area , Absorbable Oxidized Regenerated Cellulose Net Size 2X 3 With Surgical Sponge Topical Absorbable Haemostatic Bactericidal Property , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And YConnector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 16 Fg , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And YConnector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 18 Fg , Bone Cement With Antibiotics,Fast And Slow Setting , Sanitary Napkin, Beltless 1. Covering - Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler - The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc. 3. Back Strip - A Back Strip For Sticking The Sanitary Napkin Onto The Underwear Should Be There Using Good Quality Adhesive Material. 4. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Total Pad Length 210 +_ 10 230 +_ 10 Width 60 To 75 70 To 85 Thickness 8 +_ 2 5. Weight : Not More Than 10 Gm . . Instruction For Usage Should Be Mentioned On Every Packet , Sanitary Napkin, Belttype 1. Covering - Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler - The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc 3. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Pad Length 220 +_ 10 Width 70 +_ 5 Thickness 17 +_ 3 4. Weight : 12 +_ 3 Gm 5. Pack - Six Napkins In A Pack. 6. Elastic Belt With Loops Shall Be Provided In Each Pack. 7. Absorbency: The Napkin Should Be Able To Absorb Not Less Than 30 Ml Of Normal Saline Or Coloured Water Or Test Fluid When Poured On To The Centre Of The Napkin At The Rate Of 15 Ml Per Minute. .Instruction For Usage Should Be Mentioned On Every Packet. , Oxygen Mask (Adult) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. , Oxygen Mask (Paediatric) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. • Mask Connector 4M , Sterile Catheter, Single Use, For Urinary Drainage(Foley Baloon Catheter), 2 Way, Size 14 • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For A Traumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30+- 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Ballon Capacity Should Be Mentioned As Per Is 11497 • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 , Nelaton - Catheter Size 14 Fg Distal End Is Close And Proximal End Has Female Colour Code Connector • Soft, Kink Resistant Medical Grade Pvc Tube • Length:40 Cm • Individually Packed In Poly And Sterile , Ecg Electrode •Reliable Trace, •High Conductivity,• Easy To Handle , Surgical Blade Sterile, Size 23 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Urethral Catheter 90 (Fg-14), Made Up Of Medical Grade Pvc , Urethral Catheter 91 (Fg-10), Made Up Of Medical Grade Pvc , Vaccum Suction Set, 2.5 Meter Length, •Suction Handle With Suction Tube •Sterile,• Pyrogenic Free, •Latex Free,• Single Use , Epidural Minipack 18G, 90 Mm, Metal Stylet For Single Use Only, •Sterile, •Epidural Catheter 20G, L 90 Cm, •6 Lateral Holes Closed End, •Borst Adapter •Epidural Catheter Flat Filter 0.2 Micro Meter •Thread Assist Guide•Lor (Loss Of Resistance) Plastic Syringe 6 Ml , Vascular Catheter 16G/5Fr, Double Lumen Length 40Cm.Usfda/ Four Digit Notified Ce Approved, Should Have Two Guide Wire 45Cm & 80Cm Or More (Logline Iv.) Peel-Away Sheath Glide Thru 5Fr*10 Cm, Guide Wire Nitinol 80 Cm, Guide Wire Nitinol 45 Cm Introducer Needle 21 G *7 Cm, Syringe - 10 Ml Tuer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape, 5 Fr Pressure Injectable Picc Line With Blue Flex Tip 40 Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter With Metal Guide Wire, 4Fr Single Lumen, Distalvalve, Saline Flush Only Size 45Cm Or More Usfda/ Four Digit Notified Ce Approved (Logline Iv.) Internal Stylet, Statlock Stabilization Device (Suture Less), Introducer Needle, Micro Introducer With Vessel Dilator, Guide Wire- 50 Cm Nitinol, Safety Scalpel,Suture Wing, End Cap , Vascular Catheter With Metal Guide Wire 3Fr Single Lumen,Micro Introducer,Contrast Media Compatible, Size 45Cm Or More (Logline Iv.) Usfda/ Four Digit Notified Ce Approved Syringe 12 Ml,Internal Stylet,Measuring Tape,Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G, Micro Introducer With Vessel Dilator,Guide Wire-50 Cm Nitinol,Needle Introducer 21 G, Safety Scalpel, End Cap , Vascular Catheter 7Fr-16 Cm With Chlorhexidine, Silver Sulfadiazine Coated Triple Lumen Usfda/Bis With Testing Standard. Introducer Needle 18 G., Spring Guide Wire 45 Cm J Tip, Dilator 8.5 Fr., Raulerson Spring Introduction Syringe 5 Ml , Vascular Catheter 5Fr/16G, Double Lumen Length 50Cm.Usfda/Four Digit Notified Ce Approved. Should Have Two Guide Wire 45 Cm & 80Cm Or More(Logline Iv.) Peel-Away Sheath Glide Thru 5Fr *10 Cm, Guide Wire Nitinol 80 Cm, Guide Wire Nitinol 45 Cm, Introducer Needle 21 G *7 Cm, Syringe-10 Ml Luer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape,5 Fr Pressure Injectable Picc Line With Blue Flex Tip 50 Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter 5Fr/16G, Double Lumen Length 55Cm.Usfda/ Four Digit Notified Ce Approved, Should Have Two Guide Wire 45Cm & 80Cm Or More (Logline Iv.) Peel-Away Sheath Glide Thru 5Fr *10 Cm,Guide Wire Nitinol 80 Cm,Guide Wire Nitinol 45 Cm,Introducer Needle 21 G*7 Cm, Syringe-10 Ml Luer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape,5 Fr Pressure Injectable Picc Line With Blue Flex Tip 55Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter With Metal Guide Wire 5Fr Double Lumen, Introducer Safety Piv Catheter20g, 45Cm Or More (Logline Iv.) Usfda/ Four Digit Notified Ce Approved Syringe 12 Ml, Internal Stylet, Measuring Tape, Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G,Micro Introducer With Vessel Dilator,Guide Wire-50 Cm Nitinol,Needle Introducer 21 G,Safety Scalpel, End Cap , Vascular Catheter With Metal Guide Wire,5Fr Triple Lumen, Size Range 55Cm Or More (Logline Iv:) Usfda/Four Digit Notified Ce Approved Syringe 12 Ml, Internal Stylet, Measuring Tape, Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G,Micro Introducer With Vessel Dilator, Guide Wire-50 Cm Nitinol, Needle Introducer 21 G, Safety Scalpel,End Cap , 3 Way Stop Cock , Non Pyrogenic & Single Use, Should Be Leak Proof, With Smooth Movements , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 10 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 50 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 100 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 150 Cm (Non Pyrogenic & Single Use) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) • Graduated Bag, • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube , Elastic Adhesive Bandage Bp 1M X 10Cm Adhesive Material Should Have Good Quality Sticking Property, Non-Allergic , Sterile Disposable (Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G · Should Be Packed In Transparent Single Blister Pack · Should Confirm To Is 10555 Standard · (Neonatal Iv Cannula Size 26) , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Paediatric · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads In Small Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear · Should Be Single Use With Bronchoscopy And Co2 &O2 Port With Chin Support · Non Allergic, Leak Proof, Contour Should Be Maintained , Nebulization Mask Adult , Nebulization Mask Paediatric , Chemotherapy Port &Non-Coring Needles(Adult) · Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Port With Small Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 8Fr With Silicon Material With Peel Apart Percutaneous Introducer System. · Chemo Port Huber Needle 20G And 22G. , Chemotherapy Port &Non-Coring Needles(Pediatric) Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Power Port With Large Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 6Fr With Silicon Material With Peel Apart Percutaneous Introducer System Chemo Port Huber Needle 20G And 22G. , Core Biopsy Instrument With Compatible Co-Axial Needle (Automatic Disposable) , Bone Marrow Biospy Needle , Eyelid Occlusion Dressings Use For Eyelid , Eye Pressure Shield , Nonabsorbable Polypropylene Light Weight Macroporous Mesh. Usfda/Ce Certificate With Nnotified Body. , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body , Absorbable 5 Mm Hernia Mesh Fixation Device 30 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm. Circular Usfda/Ce Certificate With Notified Body , Absorbable 5 Mm Hernia Mesh Fixation Device 15 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm.Circular Usfda/Ce Certificate With Notified Body , Non Absorbable 5 Mm Hernia Mesh Fixation Device With 30 Helical Shaped Titanium Tacks 3.96 Mm Width And 0.61 Mm Diameter Usfda/Ce Certificate With Notified Body. , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Linear Cutter 55Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Linear Cutter 75Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Universal Linear Cutter Cartridge 75Mm Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 75Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology. , Universal Linear Cutter Cartridge 55-60 Mm For Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 55-60 Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3- D Staple Technology. , Curved Cutter Stapler 40 Mm Linear Cutter Or Curved Shaped Radial Stapler Cartridge For Simultaneous Cutting And Stapling , Curved Green Cartridge Having Close Staple Height Of 2.0 Mm, Tactile Feedback On Completion Of Firing Sequence, New Anvil, Knife With Every Catridge , Circular Stapler 33Mm With Controlled Tissue Compression With Adjustable Staple Hight (1.5-2.2 Mm) For Controlled Tissue Compression Longer Staple Leg 5.2 Mm To 5.5Mm , & Non Slip Grip Surface , Laparoscopic Cartridge For Stapler 60 Mm Blue, 1.5 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Laparoscopic Cartridge For Stapler 60 Mm Green, 2.0 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Procedure For Prolapse And Hemorrhoids Stapler 33Mm - Hemorrhoidal Stapler Kit Consists Of 33Mm Hemorrhoidal Circular Stapler (With Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm - 1.5 Mm, Staple Open Leg Length Of 4.0Mm - 5.5 Mm), Suture Threade, Circular Anal Dilator, Purse-String Suture Anoscope, Suture For Purse String. , Optically Guided Bladeless Trocar 12Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Optically Guided Bladeless Trocar 12 Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer Length 100Mm. , Facial Closure Device Contain - Optical Bladeless Trocar With Facial Closure Device Comaptible With Clear Cannula Have Two Side Opening Meant For Uniform Port Closure , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Varied Staple Height Reloads/Cartridges For 80 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 60 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 60 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Eea Circular Stapler Purple Colour Medium Thick , Triple Row With Tristaple Technology (Three Row Of Staple Inner To Outer Row 3.0,3.5 And 4.0 Mm With Sloped Cartridges Face In One Stapler) Diameter 31Mm , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 80 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 80 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Wound Protector With Double Ring In Medium 5-9 Cm , Endo Catch Specimen Removal Kit:With Continuous Ring ,Polyurethane Pouch With 34.5 Cm Shaft Length , 10Mm With Leakproof And Impervious Material To Cancer Cells Of 0.5 Microns/ Pretied Purse String On Pouch Usfda Approved , Disposable Laparoscopic Clip Applier Preloaded With 15/16 Clips, 5Mm Diameter With Clip Logic Technology/Over Load Mechanism And Digital Display/Clip Indicator Titanium Alloy Clips- U Shaped. , Laparoscopic Liner Cutter Without Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 45Mm Capable Of Loading All Length Cartridges On Same Gun Only , Laparoscopic Liner Cutter With Or Without Integrated/ Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 60Mm, Capable Of Loading All Colour Coding 60Mm Cartridges On Same Gun. , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,9Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Up To And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip- Focus 9 , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,17Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Upto And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip - Focus 17 , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 35 Cm Shaft Length With 5 Mm Wide Straight Jaw Design With Seal Length Of 20Mm And Cut Length Of 16Mm,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy And Having A Temperature Controlled Mechanism Within The Jaw And Having Articulation Of 110 Degree(55 Degrees On Both Sides) And Capable Of 360 Degrees Rotation , Advanced Bipolar Tissue Sealer 37 Cms, With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm Jaw Aperture Designed For Use In Laproscopic Surgical Procedures With Curved And Tapered Tip And Uses An Advanced Algorithm For Intelligent And Efficient Energy Delivery. Device To Have Intuitive Design With Separate Seal And Cut Button And 360 Degree Continuous Shaft Rotation , Laparoscopic Shears 5Mm Diameter,36Cm Long, 18Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting,Sealing,Grasping And Coagulating Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, Advance Hemostasis Hand Activation Mode For Sealing Vessels Upto 7Mm In Diameter ,Ergonomic Handle Compatible With Ultrasonic Energy Source, Capable Of Hand And Foot Activation With An Integrated Hand Piece And Transducer. , Connecting Cable For Ultrasonic Harmonic Scalpel For Open Energy Probes Compatible With Focus Plus Shear- Hp Blue , Connecting Cable For Ultrasonic Harmonic Scalpel For Lap Energy Probes Compatible With Ace Plus Shear Hp054 , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (2*2 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*2) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*1 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (1.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (3 Mm) Diameter Drill Bit Machine With Insertion Tools , Speech Prosthesis For Laryngectomy 22.5Fr (6 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (8 Mm) , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 2.0,2.5 And 3.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Tan Colour Code For Vascular Applications , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 3.0,3.5 And 4.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Purpule Colour Code For Medium To Thick Tissue , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Black Varied Staple Height Of 4, 4.5 And 5Mm Leg Length , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 2*4Cm Or Size 2-3*5- 6Cm , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 5*10Cm Or Size 5-7*7- 11Cm Or Size 4*8Cm , Disposable 10 Mm Endoscopic Clip Applier With Facility Of Loading Clips Independent Of The Firing Mechanism: Medium/Large Size , Disposable Clip Applier Preloaded With 20 Clips, Superinterlock Security With Clip Design Technology Medium , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Urine Collecting Bag, Disposable 2000 Ml With Uroflow Meter , Central Neck Line - Double Lumen (Antimicrobial Coated/ Chlorhexidine , Silver Sulfadiazine Coated) Central Lumen Catheter, Double Lumen) 7 Fr Usfda/Bis With Testing Standard. , Microcatheter For Aneurysm, Two Tip, Outer Diameter-2.1 To 2.4 & 1.7 Fr. Inner Diameter- 0.017 To 0.015. Nitinol Brading, Straight Tip Compatible With 0.014Microwire. It Should Have Radio Opaque Tip & Hydrophilic Coating. , Straight Tip Microcatheter With Four Transtion Zone Proximal Stainless Steel Triple Braid, Distal Segment Stainless Steel With Soft Distal Segment Of 6 Or 10 Cm, Outer Layer Pebax,Inner Layer Of Stainess Steel Braid Coil, Ptfe & Polyolefin Elastomer With Proximal &Distal For Deploying Intracranial Device: Stent Deployment0.027.Id , Straight Tip Microcatheter With Four Transtion Zone Proximal Stainless Steel Triple Braid, Distal Segment Stainless Steel With Soft Distal Segment Of 6 Or 10 Cm, Outer Layer Pebax,Inner Layer Of Stainess Steel Braid Coil, Ptfe & Polyolefin Elastomer With Proximal &Distal For Deploying Flow Divertor Delivery With Single Tip Markar 0.027 Id , Flow Guided Microcatheter Extruded Construction Proximal Size 2.7 F Middle Size 2.4 F Distal Size 1.2 To 1.8 F Working Length 155 To 180. Catheter Endo Hole Diameter 0.009 To 0.13. Compatible With 0.007 To 0.010, It Should Have Radio Opaque Tip & Hydrophilic Coating Compatible With Dmso. , Stinless Steel Hydrophilic Coated 0.14 Neuro Guide Wire With Twister Technology, Microridge Design, Optimized Core Wire Profile 205Cm In Length & Coil Length 5Cm , Aortic Punch 4 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 4.5 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 3.6 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Laproscopic Port With Trocar 5Mm Optically Guided Bladeless Trocar 5Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. 14G X 11Cm To 20Cm , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode- Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. (Size 18Gx11cm Or Above) , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode- Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. (Size 18Gx15cm Or Above) , • Incise Drape Made Up Of Polyester Film With An Acryllc Adhesive That Contains A Complex Of Lodoform (N- Vinyl 2 Pyrrolldine) With A Lodine Concentration Of 0.092 Mg Lodine/Cm2. • Film Should Be Breathable And Conformable To Skin, Compatible With Povidone And Chg Skin Preps. • Lodine From The Drape Should Be Present In The Deepest Skin Layers (1000 Microns Depth) Where Hair Follces Exist Apart From Killing Microbes On Skin Layer. • Produst Should Be Registered As A Class ‘D Medical Devise With Cdsco India Since ItS A Antimicroblal Product. • It Should Be Gamma Sterile And Us-Fda Approved. Size Should Be 56Cm 45Cm (Adhoslve Area) , Rem (Return Electrode Monitoring) Single Use, Corded Patient Return Electrodes Conductive Adhesive Hydrogel With Usfda , Surgical Gloves 6.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Ionic Silver Highly Absorbent Multilayer Foam Dressing With Broad Spectrum Antimicrobial , Bactericidal Efficacies And Having A Soft Siliconadhesive Wound Contact Layer , Providing Sustain Release Of Silver Upto 7 Days. Size: 10 Cms X 10 Cms And More , Self-Adherent Moist Wound Foam Dressing Made Up Of Multilayer Matrix With Soft Silicon Adhesive Layer For Pressure Ulcers/Bed Sores At Sacrum 16 Cms X 20 Cms And More , Double/Single Wall Resuscitator With Peep Valve In Adult (Double Wall Resuscitator With Peep Valve In Adult It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable/Eto Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult Bag Volume: Mark Iv (1300 Ml Or More) Weight: Adult (415 G) And More It Should Be Us-Fda, Ce & Iso Certified Adult , Double Wall Resuscitator With Peep Valve In Paediatrics It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult & Peadiatric It Should Have Provision To Attach Manometer For Paediatrics Ambu Bag Bag Volume: Mark Iv Baby (300 Ml) Weight: Baby (190 G) It Should Be Us-Fda, Ce & Iso Certified , Single Patient Use Sebs Resuscitator (With Peep Valve In Neonatal 220-300Ml) • It Should Be Single Use Resuscitator Made To Sebs Material Not Pvc. • It Should Have Unique Single-Shutter Valve System For Reliable Functionality & Swivel Between Valve And Mask Permits 360° Positioning In Relation To The Patient • It Should Have Thin-Walled Compression Bag With Hand Strip. • Resuscitator Volume: Neonate(220-300Ml) • (Including Reservoir And Mask) • It Should Be Ce/Iso/ Us Fda Certified. Or As Per Who Specification. , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Offset Connector Cardio Sensor Electrodes • It Should Have High Conductive Wet Gel To Ensure Reliable Traces. • It Should Be Design With Offset Connector To Prevent Artefacts From Disrupting The Readouts • It Should Have High Quality Ag/Agcl Sensor To Ensure Excellent Trace Quality • It Should Have Size Not More Than 72 X 68 Mm • • Sizes -Adult , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Ultrasorbs Ap Disposable Drypads, Dry Pad For Moisture Management, 58.4X90cm, With Breathable Layer, Super Absorbent Core, Aqua Shield Film And Air Permeable Back Sheet, Absorbency Of 1800-2300Gm, Usfda/Ce/Bis Compliant, Iso13485 Compliant , Over-The-Ear Nasal Cannula Over-The-Ear Nasal Cannula With Star Lumen, 50 Tubing, Must Be Flexible Contoured Lip Tab Provides A High Level Of Stability And Patient Comfort. Over-The-Ear Design For A Comfortable And Secure Fit, Crush- And Kink-Resistant Tubing. Usfda/Bis With Testing Standard. , Pediatric Nasal Cannula Pediatric Nasal Cannula Softech With Universal Oxygen Connector, 7 Star-Lumen Tubing Lightweight, Flexible Nasal Cannula With Standard Over-The-Ear Designed That Optimizes Fit And Stability, Soft Nasal Prongs Help Maximize Patient Comfort. Individually Packaged For Convenience And Sterility. Manufacturer Must Be Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K & Ce Certification. , Volumetric Incentive Spirometer (Adult) Volumetric Incentive Spirometer (Adult) 4000 Ml And Above With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification , Volumetric Incentive Spirometer (Pediatric) Volumetric Incentive Spirometer (Pediatric) 2500 Ml With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Mask For Tracheostomy Adult Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Pardiatric Mask For Tracheostomy Pediatric Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Elongated Aerosol Mask Adult Elongated Aerosol Mask Adult With Under-The-Chin Design For Excellent Fit On Wide Range Of Face Sizes Must Be Clear, Soft Vinyl For Patient Comfort; Adjustable Nose Clip Assures Comfortable Fit; Specifically Designed For Aerosol Therapy; Must Be With Supplied With 6Ft -7Ft. Corr A Flex Corrugated Tubing, Featuring Cuttable Sections Every 6 In. Usfda/Bis With Testing Standard. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Limb Portable Adult Ventilator Circuit With Universal Single Limb. Must Be Complete Kit With Main Circuit Hose, Exhalation Valve Manifold, Aerosol Hose, Patient Elbow Connector, Proximal Airway Pressure Line, Exhalation Valve Line, And Humidifier Limb. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 70-72 Inch. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us- Fda/ Eu Ce Four Digit Notify/ Iso , Infant Prong Cpap Cannula Infant Prong Cpap Cannula Nasal Size 0 With Designed To Reduce Trauma Associated With Delivery Of Infant Nasal Cpap. Must Be Soft Siliconised, Anatomically Curved Prongs To Enhance Fit. Luer Fitting On Expiratory Connector To Allow Proximal Airway Pressure Monitoring. Each Set To Include, Soft Siliconised Cannula; Inspiratory & Expiratory Elbow Connector; Knit Cap; Two 6 In. Hook And Loop Fastener Sections; Two 10 To 7.5 Mm Adaptors. Manufacturer Must Be Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K & Ce Certification. , Fhme Heat And Moisture Exchangers With Bacteria Viral Filters Bacterial Filtration Efficiency≫ 99.99 % And Viral Filtration Efficiency ≫ 99.9999% . Filter Membrane Should Be Of A Hydrophobic Non-Woven Polypropylene Material. Should Be Tailored To Meet The Specific Needs Of Both Anaesthesia And Intensive Care. , Tracheostomy Hme: 1 Heat And Moisture Exchangers For Spontaneously Breathing Tracheotomy Patients. 2 Should Have In Built Oxygen Port. 3 Should Be Compact & Light Wt. 4 Should Be Suitable For Ambulatory Patients, Sampling And Suctioning Can Be Done Without Removing It. 5 The System Should Have Kink Resisting Oxygen Tubing , Double Lumen Endobronchial Tube Left: Size-37Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left: Size-39Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Manifold Manifolds In 2, 3, 5 Port With Configuration Of Left-Right Orientation, On-Off Handle, Full-Half Body, 200 Psi-500 Psi Rating And Wide Port Spacing. Should Have Clear Polycarbonate Body To Provide Durability And Visibility, Airless Rotator And Large Bore Inner Lumen Throughout Including Rotator Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard. , High Pressure Tube High Pressure Tubing In 25Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard. , High Pressure Tube High Pressure Tubing In 51Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard , High Pressure Tube High Pressure Tubing In 76Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard , High Pressure Tube High Pressure Tubing In 122,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi Usfda/Bis With Testing Standard , High Pressure Tube High Pressure Tubing In 183Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard , Torque Device Torque Device For .014 To .038 Standard And Hydrophilic Guide Wires With Squeeze-Load- Release Mechanism.Usfda Approved , Radial Band Radial Hemostatis Band In 24 Cm . Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Radial Band Radial Hemostatis Band In 29 Cm. Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Angiography Needle Angiography Needle In 18G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Needle Angiography Needle In 20G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Wire Ptfe Guidewire In .035, .038, In Regular Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coating For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , Angiography Wire Long Length Ptfe Guidewire In .035, .038, With Exchange Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coatting For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , H10ydrophilic Wire Long Length Hrophilic Guidewire Of .018, .025, .035, .038 In 150-180Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Approved. , Hydrophilic Wire Long Length Hydrophilic Guidewire Of .018, .025, .035, .038 In 220-260Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Approved. , Hydrophillic Braided Sheath Hydrophilic Braided Sheath Introducer In 4F To 7F, Length: 7Cm, 10-11Cm, 15-16Cm, 23-25Cm Or 7-25 Cm With The Option Of .018, .021, .025 Plastic Jacketed And Spring Coil Guidewire. Should Have Ultra-Thin Wall And Flat Wire Braiding Technology To Provide Support And Low Profile.Usfda Approved , Femoral Sheath With Needle Femoral Sheath In 5F To 8F, Length: 11-25Cm With Puncher Needle Of 18G And Guidewire Of .035, .038. Should Have Rotating Suture Ring, Snap-Fit Dilator To Prevent Slipping During Insertion And Holster Pack. Should Be Available In Polypropylene. Usfda Approved , Angiography Radial Catheters Diagnostic Radial Catheter With Radial Ultimate Curve In 4-6F. Lenght Of 100Cm, 110Cm, 125Cm. Should Have Four Type Of Radial Ultimate Curves. Should Have Flat Wire Braiding, Nylon Material, Thin Wall Design For Higher Flow Rates, Radio-Opaque Tip, Strain Relief And Winged Polycarbonate Hub. Us Fda Approved , One Loop & Triple Loop Snare Snare Kit(2-35Mm Diameter, 90-Degree Nitinol & Gold-Plated Tungsten Loop) And Multiloop Snare Kit(2-45Mm Diameter, Three Interlaced Nitinol Loops) For Foreign Body Retrieval, Should Come With Flexible, Reinforced, Strain Relief Hub To Reduce Buckling And Unique Peel Away Insertion Tool. Usfda Approved , Ptca Kit (1) Three Port Manifold With Knobs To TurnRight When Open (2) One Pressure Line, (3) Fluid Connecting Line, (4) Contrast Connecting Line, (5) One Three Way Stop Cock, (6) One Y-Connector Hemoststic Valve With Spring Type Push And Release Mechanism, (7) One Inflation Device With Manometer Upto 30 Atm (Easy To Operate With Luminescent Dial), (8) One Luer Lock Controlled Syringe Of 10 Ml With Finger Grip, (9) Insertion Needle, (10) Torque Device.Usfda Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes Are 5Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 6Fr , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 7Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 8Fr. Usfda/ Notified Ce Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.S Eparate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes Are 10Fr. Usfda/ Notified Ce Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 12Fr. Usfda/ Notified Ce Approved , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3.5Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 5.5Mm , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. T Size 13Fr . , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. Sizes 16Fr. , Catheter Mount Double Swivel Connector, It Should Have Bronchoscopy Port . It Sholud Be Approved By Us Fda , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism, Radiopaque Stripe, Gamma Sterilized Size - 20Fr Length (0.8 - 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism, Radiopaque Stripe, Gamma Sterilized Size - 24Fr Length (0.8 - 5.0) , Percutaneous Endoscopic Gastrostomy (Peg) 24Fr Percutaneous Endoscopic Gastrostomy (Peg) Medical Grade Silicone Construction.External Retention Ring .Universal And Bolus Feeding Port Connectors,Medication Port.Collapsible Internal Retention Bumper.Radiopaque Stripe And Bumper.Tubing Clamp.Eto Sterilized.Sizes - 24Fr , Anti Microbial Gloves 6 , Anti Microbial Gloves 6.5 , Anti Microbial Gloves 7 , Anti Microbial Gloves 7.5 , Anti Microbial Gloves 8 , Anterior Chamber Iol Pmma Material, Single Piece Kelman Multiflex Design5-6 Mm Optic Size With 12-13 Mm Overall Size Biconvex Power Range +12 To +24Should Be Iso Or Ce Certified. , Capsular Tension Ring Standard Capsular Tension Ringpmma Material With One Eyelet Each At Each End 10 Mm To 12 Mm Overall Diameter Sterile Should Be Iso/Ce Certified Mfg. , Neonatal High Flow Nasal Cannula Having 8 Litre Flow. Should Have Soft Tip . , Pur-Xro Catheter 20 Cm, 28G/1Fr Picc Line With Stylet, Splitting Needle With Securing Wings With 8 Cm Extension Tubing (Flow Rate 0.7Ml/Min) , Pur-Xro Catheter 30 Cm, 24G/2Fr Picc Line With Split Cannula And 10Cm Extension Tubing Over Catheter (Flow Rate 4.5Ml/Min) , Long Introducer Sheath (20-30 Cm Long) (Size 5Fr..) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 6Fr.) Us Fda + Ce/ Dgci Approved·· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 7Fr.) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 4F Us Fda + Ce/ Dgci Approved·Sizes 4 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 5F Us Fda + Ce/ Dgci Approved·Sizes 5 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 6F Us Fda + Ce/ Dgci Approved· Sizes 6 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Ptfe Coated Diagnostic Guide Wire - (Exchange Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In , 0.035 Inches Size· Should Be 240-300 Cm Long· Should Be Available As Straight Or J-Shaped Tip· Should Be Available Fixed As Well As Movable Core. , Hydrophilic Diagnostic Guide Wire - Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved·Should Be Available In 0.032 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Hydrophilic Diagnostic Guide Wire - Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Radiofocus Miniplastic Guidewire (, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Sould Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 150-180 Cm Long , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Multipurpose Catheter Us Fda + Ce/ Dgci Approved Multipurpose Catheters In Various Standard Curves And Lengths. , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , Nternal Mammary Catheter 7Fr Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , By-Pass Graft Catheter 5Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths , By-Pass Graft Catheter 6Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths , By-Pass Graft Catheter 7Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved · , Introducer Sheaths For Pediatric Use (Size 5 Fr.) With J Tip/Straight Introducer Wire Us Fda + Ce/ Dgci Approved· Between 5.5-7.5 Cm Long· 0.021 Inch Straight Introducer Guide Wire· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3- Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant· With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· Should Have Smooth And Resistance Free Insertion , Arterial Pressure Monitor Lines (100 Cm Long) Us Fda + Ce/ Dgci Approved·Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (150 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (200 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Angio.Kit/Ptca Kit (3 Port Many Fold With Attached Tubing One Pressure Line + Two Iv Set Connecting Tube And Two Leurlock Syringe ) Us Fda / Ce/ Approved , Venaseal Closure System For Varicose Veins Usa/Fda Approved N Butyl Based Adhesive Formation 50/90/105/120 Cm 145 Cm(3/4/6/8 F ,014/0.35 Compatible , Bone Marrow Biopsy Needle Size 8G 4 & 6 With Diamond Bevel Tip & Tapered Distal Canula. Disposable Bone Marrow Biopsy Needle Should Have Ergonomic T- Handle Design With Seprate Handle Cap. Should Have Trocar/Diamond Tip For Easy Coring Of Bone. Should Have Triple Crown Cannula Tip With 6 Facets.Should Be Available With Narrow Acquition Cardle With Sample Size Verfication Marking Should Be Available In 8,11,13 Gauze Usfda/Four Digit Ce Approved , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter(18Fr, 2-Way) • Made From 100% Medical-Grade Silicone. • Biocompatible And Non-Reactive, Ideal For Long-Term Catheterization. • 2-Way Foley Catheter (Typically Available); • Smooth, Non-Stick Surface For Easy Insertion And Removal. • Integrated Silicone Balloon For Retention In The Bladder. • Radiopaque Stripe Throughout The Catheter Length For X-Ray Visibility. • Standard (Rounded) Tip. • Available In Sizes Ranging From: 18 Fr). • Follows International Color-Coded System To Identify French Sizes. • Large Symmetrical Drainage Eyes For Effective Urine Flow. • Latex-Free - Suitable For Patients With Latex Allergies. • Universal Funnel-Shaped Connector For Drainage Bag Attachment. , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Having Maryland Jaw Sealer And Divider With Wide Jaw Aperture 13Mm And Cut Length 18.5Mm With Shaft Rotation Of 350 Degrees And With One Step Sealing Mechanism. Should Have The Manual Cutting Mechanism. And It Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting & Coagulations Device With Tissue Fusion Ligature Technology Have Small Jaw Tissue Sealing System For Open Procedures Vessel Sealing Instrument With Cut Length Of 14.7 Mm, Seal Length Of 16.5Mm, Jaw Angle 28 Degrees. Should Have The Manual Cutting Mechanism.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligature Technology Laparoscopic Blunt Tipped Vessel Sealer And Divider 37 Cm Long 5Mm Instrument. Wide Jaw Aperture 14.5 Mm With Shaft Rotation Of 180 Degrees ; Multifunctional Laparoscopic Device For Tissue Fusion.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting & Coagulations Device With Tissue Fusion Vessel Sealing Technology Instrument For Open Surgeries With Instrument Length Between 21-23Cm And Electrode Length Between 17-21Cm Having 22 Degree Curved Jaw With Contoured Tip Activation Both Through Hand Activation And Foot Activation With A Manually Controlled Cutting Mechanism. , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Have 36Mm Jaw Length, 180 Degree Rotatable Instrument With Curved Blade For Large Volume Tissue. Should Have The Manual Cutting Mechanism. , Cutting & Coagulations Device With Tissue Fusion Vessel Sealing Technology Have Vessel Sealing Instrument For Open Surgeries With Reusable Clamp Length Between 16-23Cm, With 12-40 Degree With Straight / Curved Jaw And Its Should Have Including 7Mm Cutting And Coag With Usfda. , Double Lumen Catheter Size- 12 Frx16 Cm Double Lumen Catheter Size- 12 Frx16 Cm (Double Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot)Size- 12 Frx16 Cm With Us Fda / Iso Ce Certified , Double Lumen Catheter Size- 12 Frx13 Cmdouble Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot Size- 12 Frx13 Cm Usfda Along With Iso Ce Certified , Long Term Double Lumen Dialysis Catheter Size- 15 Fr X 27 Cm Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided Catheter, Pull Apart Sheath, Dialator, Tunnelling Stylet, Guide Wire J/S, With Disppenser And Injection Caps, Symmetrical Tip Retrograde And Antigrade Size- 15 Fr X 27 Cm Usfda Certification Along With Iso, Ce. , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Transperant Surgical Wound Dressing Size- 5X 5.72 Cm Tranparent Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidal Protection And Anti Microbial Property. Provide A Waterproof Sterile Barrier To External Contaminating Including Liquids, Bacteria Anf Viruses , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Proteciton And Anti Microbial Property , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property , Multi-Vent Mask Pediatric, Multi-Vent Mask Pediatric, Air Entrainment Masks, Must Be Safe, Simple Delivery Of Variable Oxygen Concentrations. Each Mask To Includes Color-Coded Diluters: Green For Low Concentration, White For Medium Concentration. Locking Ring To Secure Flow Setting. Must Include Adaptor For High Humidity Entrainment. Complete Kit With 7-Ft Oxygen Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane Material, Catheter Has Zigzag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. Size 12-Fr Product Should Be Usfda Approved , Closed Suction Catheter Mdi Port Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip With Mdi Port.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. , Closed Suction Catheter Has Isolated Cleaning Chamber 12 Fr. Closed Suction Catheter Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip.Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material,Catheter Has Zig-Zag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version.Can Be Used For 72Hr. Size 12 Fr. , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane Material, Catheter Has Zigzag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. Size 14-Fr Product Should Be Usfda Approved. , Multifocal Iol Multifocal Iol (Multifocal Iol Biconvex, Single Piece Optic Size 6 Mm, Overall 12-13 Mm Haptics Hydrophobic Single Loop Or Hydrophilic Double Loop Uv Blocking 360 Degrees Square Edge, Sterile Packing Disposable Sterile Injector For Sub 2.8 Mm Incision Power +16 To + 25 D Diffractive Multifocal Design With Near Add +3 To +4 D Iso Or Ce Approved Samples Required For Approval , Glaucoma Drainage Implant (Valved) With Silicon Tube Adult , Glaucoma Drainage Implant (Valved) With Silicon Tube Paediatric , Scleral Fixiated Intraoccular Lense Single Piece Pmma: Optic6-6.5Mm, Overall13.5Mm Haptic With Hole For Suture Fixation , Central Line With Triple Lumen With Y Needle With Syringe And Guide Wire 7Fr To 8.5Fr With 15 Cm To 20 Cm Catheter With Tecoflex/ Polyurathane Material With Usfda Approved. , Post Operative Surgical Cover Dressings Hydrofiber/Foam Dressings With 1.2% W/W Impregnated Ionic Silver & Tripple Hydrocolloid Matrix Dressings With Broad Spectrum Bactricidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , Post Operative Surgical Cover Dressings Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver & Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactericidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , 2 Pcs Flat Base Ostomy Body Fit 60 Mm Kit 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm, Elastic Tape In Semi-Circular Shape With Hydrocolloid Adhesive For Extra Security Of Base Plate. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm), Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks , 2 Pcs Convex Base Ostomy Body Fit 60 Mm Kit Two- Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm)Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks , 1 Pcs Trasnparent Colostomy Body Fit 60Mm Kit One- Piece Colostomy Bag- Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.34 N/Mm), Bag Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. One Side Transparent For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm) , 2 Pcs Flat Base Ostomy Body Fit Bag 60 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. Window On Bag For Inspection 60Mm . With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic. , 2 Pcs Flat Base Ostomy Body Fit Bag 70 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. One Side Transparent For Inspection. 70Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic , 2 Pcs Convex Base Ostomy Body Fit Bag 60 Mm Two-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material. Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. . Window On Bag For Inspection 60Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic , Antimicrobial Transperant Provides Immediate And Continuous Antimicrobial Protection With Integrated Chlorhexidine Gluconate (Chg) Gel Pad, Proven To Reduce Crbsi And Vascular Catheter Colonization, Size 11.5Cm To 8.5Cm, Breathable Film Coating Provides A Barrier To Microbes* And External Contaminants Size 11.5Cm To 8.5Cm, , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad, A Superabsorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. Size 13X13 Cm And More , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad, A Superabsorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. Size 10X25 Cm , Polysiloxane Or Silicone Gel Sheet For Scar Management. Size 10 * 10 Cm Or 10X18cm , Polysiloxane And Silicone Gel Sheet For Scar Management Size 5 X5 Cm , Triple Layer Antimicrobal Form Dressing For Burn Wound With Silver Sulphate, Silver Content 1.2 Mg/Cm 2 With Active Release Of Silver Upto 7 Days With Soft Silicon Atraumatic Wound Contact Layer For Painless Dressing Change. Product Should Be Ce/Usfda Certified Size 20X20 Cm (45Mm) + 15% Deviation Insize Will Be Acceptable. , Triple Hydrocolloid Skin Barrier Where No Cutting Is Required Comprised Of Pectin, Gelatin And Sodium Carboxy Methyl Cellulose,Elastomeric Polymers Extending Turtlenecking Effect And Rebounding Memory Technology With Audible Click And Flexible Tape Collar. , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved 10Mm , Nasal Haemostatic Sponge Pack With Out Airway 8Cm , Nasal Haemostatic Sponge Pack With Out Airway 10Cm , Nasal Haemostatic Sponge Pack (With Airway) 8Cm , Flexomatlic Tube 3-8.5 With Stylet Reinforce Et Tube With Wiring From Tip To End. It Should Be Usfda/Ce/Bis/Is. , Disposable Transducers For Invasive Pressure Monitoring Compatible With Available System In Cath Lab In Smsh Us Fda + Ce/ Dgci Approved· Disposable Transducers For Invasive Pressure Monitoring· Should Be Compatible With Available System In Cath Lab (Iabp - Data Scope & Cath Lab Transducer) And Iccu At Smsh· Should Meet Highest Medical Industrial Standards· Quality Certification Should Be Provided Form Authorized Agencies , Dialyzer Size 1.3 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.4 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.6 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.8 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Padiatric Dialyzer Size 0 .6 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Padiatric Dialyzer Size 0.8 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (3/8 Cir Rb Needle 40Mm Length 76 Cm)Size 1/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 20Mm Length 76 Cm) Size 3/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) Size 2/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) Size 1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 40Mm Length 76 Cm)Size 1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (3/8 Rb Needle 30Mm Length 76 Cm) Size 2/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size 1 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle 20Mm Length 70 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length 90 Cm Size 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length75- 90 Cm Size 1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Tapercut Needle (Heavy) 35- 40Mm Length 75-90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle40mm Length 90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Conventional 25Mm Length 90 Cm)Undyed Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 20Mm Length 70 Cm) Size 4/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide ) (1/2 Cir Rb Needle 40Mm Length 90 Cm Size 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 40Mm Length 90 Cm) Size 1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting Needle 22Mm Length 45 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting 16Mm Needle, Suture Length 70Cm Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (1/2 Cir Rb Needle 20Mm, Length 76 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) Size 8/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 16 Mm Length 70 Cm)Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.)Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 40-45Mm Length 60-70 Cm.)Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.)Size 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Armsize 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16Mm Needle,Length 90 Cm) Size 6/0 , Non Absorbable Surgical Suture,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb Double 8Mm Needle, Length 60 Cm)Size 7/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16 Mm Needle, Length 70 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm Length 90 Cm) Size 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy Needle 40- 45Mm Length 75-100 Cm) Size 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle Cutting Size 16-17Mm Length 70-90 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle 17Mm Length 70-90 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Armsize 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue Usp(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm)Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Armsize Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 16 Mm Length 70 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Cutting Needle 25Mm Length 45 Cm)Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) Size 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (L/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) Size 1 , Non Absorbable Surgical Suture, ,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) Size 8/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut 13Mm Double Needle 70Cm)Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle cement concrete 13Mm Needle, Suture Length Of 70Cm) Double Arm Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Armsize 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green/ Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm)Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided White (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green / Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) 1/2 Circle Taper Cut , 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm Size 2/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) *With 1/2 Circle Taper Cut , 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With 1/2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm Size 3/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglecaprone, Monofilament Sutures (1/2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm)Size 2/0 , Absorbable Surgical Sutures Polyglecaprone, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 26Mm, Suture Length 70Cm) Size 3/0 , Absorbable Surgical Sutures Monofilament Sutures Polyglecaprone /Polyglyconate (L/2 Circle Cutting 16Mm Needle,Suture Length 70Cm)Size 4/0 , Absorbable Surgical Sutures Polyglecaprone / Polyglyconate, Monofilament Sutures (3/8 Circle Cutting24- 26Mm Needle, Suture Length Of 70-90Cm)Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Reverse Cutting 40- 50 Mm Length 70- 90Cm) Size 1 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 31Mm Needle, Length 70Cm) Size 2/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 30Mm Needle, Length 70Cm) Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm/ Size 1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm/ Size 2/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm/ Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet) 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cmsize 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm Size 10/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 16Mm, Length 76 Cm) Size 5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Cutting Needle 8Mm, Length 35 Cm) Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 20Mm, Length 76 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 16Mm, Size 5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 16-19Mm Length 76 Cm) Size 4/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglyconate, Monofilament Sutures (1/2 Circle Oval Rb Needle 26-30Mm Needle, Suture Length Of 70Cm) Size 2/0 , Absorbable Surgical Suture Polyglyconate, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 20-26M M, Suture Length 70Cm) Size 3/0 , Braided E Caprolactone Coated Lactomer 1, 90Cm Gs-25,37-40Mm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 2-0 90Cm Gs-25,3Omm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 1 90Cm Gs-25,37-40Mm1/2 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Taper Point, 90 Cm , Braided E-Caprolactone Coated Lactomer 3-0 75Cm C-14 , Undyed 24Mm 3/8 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,30Mm Needle, Size 2-0, 1/2 Circle Taper Point, 90 Cm , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Reverse Cutting Os Needle, 90Cm , Braided E-Caprolactone Coated Lactomer 0 90Cm Gs-24 , Violet 40Mm 1/2 Circle Taper Point , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,20Mm Needle, Size 3-0, 1/2 Circle Taper Point, 70 Cm , Braided E-Caprolactone Coated Lactomer 1-0 90Cm Gs-25 , Dyed/Undyed 37- 40Mm 1/2 Circle Reverse Cutting , Polyglactin 910 Violet Braided, 1, 35 Cm 1/2 Circle Reverse Cutting (Heavy) 23 Mm -25 Mm Needle , Polyglactin 5-0 Rb Oval ½ Circle 16 Mm 45 Cm , Polyglactin 5-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure Mp, Purest Form Of Triclosan, 26Mm Needle, Size 2-0, 3/8 Circle Cutting, 90 Cm , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% & Above, Violet 1/2 Circle Taper Point, 17-20Mm Needle, Length 70Cm Size 3-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% & Above, Violet 1/2 Circle Taper Point Rb-1, 17 Mm Needle, Length 70Cm Size 4-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 1/2 Circle Taper Point Rb-2, Double Needle, 13 Mm Needle, Length 70Cm Size 5-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 3/8 Circle Taper Point, Bb Single Armed Needle 17 Mm Needle, Length 70Cm Size 5-0 , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Single Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm , Monofilament Polyglyconate 1 150Cm Gs-25 Loop, Green 48Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 2-0, 75Cm Green 26-30Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 3-0, 75Cm Green 20-26Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 4-0, 75Cm Green 17-20Mm 1/2 Circle Taper Point , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 3-0,70 Cm,1/2 Circle Rb,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 4-0,70 Cm,1/2 Circle Rb,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 5-0,70 Cm,1/2Circle R.B.,13 Mm , Monofilament Glycomer 1 90Cm Gs-21 , Violet 37Mm 1/2 Circle Taper Pont , Monofilament Glycomer 2-0 90Cm Gs-21 , Violet 37Mm 1/2 Circle Taper Pont , Non Absorbable Surgical Suture, Sterilized Surgical Needled Black Braided Silk With Needle 1/2 Circle Round Body 30 Mm Needle , Length 70 Cm Size 2-0 , Braided Coated Non Absorbable Suture Usp 1-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 2-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 3-0 75 Cm X 2 , Silk Reel 4-0 , Braided Polyester Caoted With Silicon 2, 26Mm 1/2 Circle Rc 75Cm , Braided Polyester Caoted With Silicon 5, 55Mm 1/2 Circle Rc 75Cm , Polypropylene Blue Monofilament, 2-0, 90 Cm 1/2 Circle Round Body Double Needle26 Mm , Polypropylene Blue Monofilament Usp 3/0,2,90 Cm,1/2 Circle Taper Point (Double Armed),26 Mm , Polypropylene Blue Monofilament, 4-0, 75 Cm 1/2 Circle Round Body Double Needle 17 Mm , Polypropylene Blue Monofilament Usp 5/0,1,90 Cm,1/2 Circle Taper Point (Double Armed),18 Mm , Polypropylene Blue Monofilament, 6-0, 75 Cm 3/8 Circle Round Body (380 Microns) Double Needle (Cutting) 13 Mm , Non Absorbable Polypropylene Surgical Sutures Size:7-0,3/8 Circle C1 Taper Point Cv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,8 Mm,60 Cm , Monofilament Polybuetester Coated With Polytribiolate 6-0 75Cm 2Xcv-1X36 , Blue 9Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 4-0 90Cm 2Xcv-23X36 , Blue 17Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 7-0 60Cm 2Xmv-175-8 , Blue 8Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 2-0 90Cm 2Xv-20X 36 , Blue 26Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 3-0 90Cm 2Xv-20X36 , Blue 26Mm 1/2 Circle Taper Point , Non-Absorbable Synthetic Unidrectional Dual Cut Angle Barb With Welded Loop Or Tab End Made Up With Polybeutester Size 1, 37Mm, 30Cm, 1/2 Circle, Taper Point , Synthetic Nonabsorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polybeutester Blue Size 2-0, 1/2 Circle, 37Mm, 30Cm Taper Point , Absorbable Synthetic Unidirectional Dual Cut Angle Barbed With Welded Loop Or Tab End Made Up With Polyglyconate 2-0 26-30 Mm 30 Cm 1/2 Circle Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 1-0, 1/2 Circle, 37Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 2-0, 1/2 Circle, 26Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 3-0, 1/2 Circle, 26Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Glycomer Blue Size 2-0, 1/2 Circle, 24Mm, 30-45Cm Rc , Polyester Ethylene Terephthalate Nonabsorbable Surgical Braided, Sterile, Surgical Suture Composed Of Poly (Ethylene Terephthalate.) Long-Chain, Linear Polyesters 1 /2 Circle Tapercut 2 X V-5 Double Needle 26 Mm 90 Cm Green Color Size 2-0 , Laproscopic Knotless Pga -Pcl Bidirectional Taper Point Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Bidirectional Taper Point 17 Mm & 32Cm , Absorbable Antibacterial Polydiaxonone Monofilament Taper Point Surgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Violet Monofilament 1/2 Circle Taper Point Ct-1 40 Mm Needle 90 Cm Suture Size 1 , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 1-0,90 Cm,1/2 Circle R.B.,30 Mm , Non-Absorbable Surgical Suture Black Braided Silk 1-0 Rc 3/8 Circle 45 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 5-0 Rc 3/8 Circle 12 Mm 76 Cm , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 5-0,76 Cm,3/8 Circle R.B,12 Mm , Non-Absorbable Surgical Suture Black Braided Silk 6-0 Rc Mp 3/8 Circle 8 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 2-0, 1/2 Circle Taperpoint, 36 Mm,100 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 6-0 Rb Micro Point ¼ Circle 8 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 4-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 3-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 5-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 5-0 Rb Oval 1/2 Circle 16 Mm 45 Cm , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 26Mm Length 70Cm3-0 , Non Absorbable Surgical Suture Sterilized Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm4-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm 5-0 , Non Absorbable Polypropylene Surgical Sutures Size:6-0,3/8 Circle 175-6 Taper Point /Rc Bv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,9.3 Mm,60 Cm 13 Mm , Non Absorbable Polypropylene Surgical Sutures Size:7-0, Compound Curve ( 1/2 & 3/8 Circle) Circle 175-6 Taper Point Blackmatte Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,9.3 Mm,60 Cm , Monofilament Synthetic Absorbable Suture Poliglecaprone 25 - Undyed Ep 3-0,70 Cm,1/2 Circle Oval R.B. J.B. Needle,26 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 3-0, 3/8 Circle Reverse Cutting,Ps Prime 24 Mm,75 Cm , Gauze Than 120Cm X 9 Mtr (Jk47) , Absorbent Cotton Wool Ip 500 Gm , Cotton 200 Gm (Jk153) , Cotton Bandage 4Inch (4.0419) (10Cm X 9 Mtr ) , Cotton Bandage 6Inch (4.042) (15Cm X 9 Mtr ) , Baby Diaper Small (Pba001) , Disposable Appron / Plastic Appron , Shoe Cover (Jk201) , Disposable Needle 22No , Disposable Needle 23No , Disposable Needle 24 No , Disposable Needle 26 No , Infant Feeding Tube 6G (4.0747) , Spinal Needle With Pencil Point Tip Having Tranparent Grooved Hub And Introducer Needle Size 27G X 3.5Inch (4.1315) , Opthalmic Micro Surgical Crecent Blade , Opthalmic Micro Surgical Knife(Keratom) , Ear Buds , Medical Body Protector Premium , Pure Type 1, Triple Helical, Porous Collagen In Particle Form (Fish Origin) With Mupirocin Usp 2% W/W And Metronidazole Ip 1% W/W, Size- 10Ml , Super Oxidized Solution With Neutral Ph Containing Hypochlorous Acid (0.003%) And Sodium Hypochlorite (0.004%) For Wound Treatment In Spray Bottle Of 500Ml , Advanced Fluid Administration System With Air Stop & Prime Stop With Integrated Back Check Valve Bacterial Retention Air Vent, Transparent Spike Designed In Accordance With Iso 8536-4, Transparent Drip Chamber (Double), 15Micron Fuild Filter In The Chamber Medical Grade , Porus Resorbable Collagen (Pure Type-1) Sheet In Nylon Mesh-Dry Form (Fish Origin)-Size- 10X10cm , Non-Occulusive Wound Contact Layer Consists Of Silver Healing Matrix Made Ofp Polyester Mesh Impregnated With Hydrocolloid Particles( Cmc), Petroleum Jelly, Polymers And Silver Salts With Demonstrated In Vitro Antibacterial Activity Upto 7 Days, Using Lipido- Colloid Technology (Tlc) , Size-10X12cm , Pure Poly Siloxane Based Silicone Scar Management Product In Sheet Form(100% Poly Siloxane And Nylon Polyamide Mesh) -Size- 10X10cm, , G Dress 10.5*25Cm , G Dress 8.5*6.5Cm , Amorphous Hydrogel In Applipak Composing Of 2.3% Carboxymethylcellulose,20.0% Propylene Glycol & Purified Water, Promotes Rapid But Gentle Debridement Of Necrotic Tissue. Size 25Gm , Triple Chambered Nutrition(3 In One) For Periperal Iv Emlusions 1800Ml-2100Ml With 80% Olive /20% Soya Lipid,Amino Acids,Glucose & Electrolytes. Tpn 1Ltr Triple Chamber Bag Should Contain Protein 20-45 Gm/L Lipid 20-40Gm/L Glucose 80-160 Gm/L , Non-Leadradiationprotectiongloves - Bis Certified , Latex Free Disposable Pencil Point Spinal Needle 27G , 127.5 Mm With Grooved Transparent Hub With Centering Protective Plastic Sleeve, Touhy Needle With Black Eye - 18 G (1.3 X 88 Mm). Protrusion Of Spinal Needle Through The Back Eye Of The Epidural Needle. With Epidural Catheter, Filter, Loss Of Resistance Syringe And Separate Locking Device - Docking System. , Electrolysed Non-Toxic, Non-Irritant And Non-Corrosive, Ready To Use Disinfectant Solution With Neutral Ph Containing Sodium Chloride (Na Cl)- )0.023%, Sodium Hypochlorite (Naocl)- 0.005%, Hypo Chlorous Acid (Hocl)- 0.004%, Electrolysed Water- 99.97% In Jerricane Of 5 Litre
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Rajasthan View Result →
2.
Power #11360834 AOC
Bids Are invited for Colorimeter Assembly Of Silica Analyzer - Colorimeter Assembly Of Hach Make Silica Analyzer Series 5500 , Ckt Bd Assy Intrconnct Ac Dc Prcss Analyzer - Ckt Bd Assy Interconnect Ac Dc For Hach Make Silica And Phosphate Analyzer Series 5500 , 3 Way Pinch Vv With Cable Assy For Analyzer - 3Way Pinch Valve With Cable Assy For Hach Make Silica And Phosphate Analyzer Series 5500 , Ckt Bd Assy Analytical Process For Analyzer - Analytical Process Ckt Board Assembly For Hach Make Silica And Phosphate Analyzer Series 5500 , Cable Assy With Air Compressor For Analyzer - Cable Assembly With Air Compressor For Hach Make Silica And Phosphate Analyzer Series 5500 , Cable Assy With 2Way Pinch Valve For Analyzer - Cable Assy With 2Way Pinch Valve For Hach Make Silica And Phosphate Analyzer Series 5500 , Colorimeter Assembly Of Phosphate Analyzer - Colorimeter Assembly For Hach Make Phosphate Analyzer Series 5500 , Keypad Membrane For Analyzer - Keypad Membrane For Hach Make Silica And Phosphate Analyzer Series 5500 , Maintenance Kit For Analyser - Maintenance Kit For Hach Make Silica And Phosphate Analyzer Series 5500 , 5Point7 Inch Lcd Color Display For Analyzer - 5Point7 Inch Lcd Color Display For Hach Make Silica And Phosphate Analyzer Series 5500 , Power Supply Card 120To240v 12Vdc 65W - Power Supply Card 120To240v 12Vdc 65W For Hach Make Silica And Phosphate Analyzer Series 5500 , Reagent Valve For Analyzer - Reagent Valve For Hach Make Silica And Phosphate Analyzer Series 5500 , Cable Assy With Thermistor And Htr For Analyzer - Cable Assy With Thermistor And Htr For Hach Make Si And Pi Analyzer Series 5500 , 1 Yr Maintenance Kit For Sodium Analyzer - 1 Yr Maintenance Kit For Hach Make Sodium Analyzer Series 9245 , 3 To 2Way Sampling Sov Nps Point8 And Point2 To 6 Bar - 3 To 2 Way Sampling Sov Nps Point8 And Point2 To 6 Bars For Hach Make Sodium Analyzer Series 9245 , 24Vdc Membrane Pump Point1l Per Mn 924X Flush Pmp - 24Vdc Membrane Pump Point1l Per Mn 924
Contract Date: Ref. Documents Contract Value : ₹ 53.20 Lakh
Boards / Undertakings / PSU No of Bidders 1
West Bengal View Result →
3.
Health and Family Welfare #11344733 Technical Bid
Tender For Supply Of Miscellaneous Item-- 1 Misclanious Item 2 Dental Consumable- Alginate 3 Dental Consumable- Amalgam Squeezer 4 Dental Consumable- Anesthetic Spray 5 Dental Consumable- Arch Bar 6 Dental Consumable- Articulating Paper 7 Dental Consumable- Base Plate 8 Dental Consumable- Bleaching Material 9 Dental Consumable- Broaches 10 Dental Consumable- Calcium Hydroxide Paste 11 Dental Consumable- Calcium Hydroxide Paste 12 Dental Consumable- Calcium Hydroxide Powder 13 Dental Consumable- Cold Mould Seal 14 Dental Consumable- Composite Finishing Kit 15 Dental Consumable- Composite Material 16 Dental Consumable- Copper Amalgam 17 Dental Consumable- Crown Preparation Kit 18 Dental Consumable- Developer 19 Dental Consumable- Devitalizer 20 Dental Consumable- Diamond Burs (Airotor) 21 Dental Consumable- Diamond Burs (Micro Motor) 22 Dental Consumable- Die Stone (Pkt Of 02 Kg) 23 Dental Consumable- Edta 24 Dental Consumable- Eugenol 110Ml 25 Dental Consumable- Fixer 26 Dental Consumable- Flowable Composite 27 Dental Consumable- Formcresol 28 Dental Consumable- G.P.Points 15-40 , 45-80 29 Dental Consumable- G.P.Points Proteper 30 Dental Consumable- G.P.Solvent 31 Dental Consumable- Gates Drill 32 Dental Consumable- Glass Ionomer Cement 33 Dental Consumable- Green Stick 34 Dental Consumable- H-File 35 Dental Consumable- Impression Compound 36 Dental Consumable- Impression Material (Rubber Base) 37 Dental Consumable- Impression Paste 38 Dental Consumable- K-File 39 Dental Consumable- Lubricant Spray 40 Dental Consumable- Luting Cement 41 Dental Consumable- Matrix Band No. 01 42 Dental Consumable- Matrix Band No. 08 43 Dental Consumable- Matrix Strips 44 Dental Consumable- Mercury 225 Gms 45 Dental Consumable- Metal Trimmer 46 Dental Consumable- Modeling Wax 47 Dental Consumable- Niti Files 48 Dental Consumable- Paper Points 15-40 49 Dental Consumable- Peso Reamer 50 Dental Consumable- Plaster Of Paris (Pkt Of 03 Kg) 51 Dental Consumable- Pluggers 52 Dental Consumable- Polishing Bursh 53 Dental Consumable- Polishing Cup 54 Dental Consumable- Polishing Paste 55 Dental Consumable- Poly Carboxylate Cement 56 Dental Consumable- Posterior Glass Ionomer Cement 57 Dental Consumable- Proteper 58 Dental Consumable- Pumice Powder 59 Dental Consumable- R.R. Liquid 110Ml 60 Dental Consumable- R.R. Powder 110 Gms (Pink) 61 Dental Consumable- Reamers 62 Dental Consumable- Root Canal Sealer 63 Dental Consumable- Screw Post Metal 64 Dental Consumable- Scrwe Post Fibre 65 Dental Consumable- Silver Amalgam 66 Dental Consumable- Sodium Hypochlorite 67 Dental Consumable- Spreader 68 Dental Consumable- Sticky Wax 69 Dental Consumable- Stone Plaster (Pkt Of 01 Kg) 70 Dental Consumable- Stone Trimmer 71 Dental Consumable- Straight Carbide Bur 72 Dental Consumable- Suction Tip 73 Dental Consumable- Teeth Set 74 Dental Consumable- Temporary Filling Material 75 Dental Consumable- Tooth Stain Remover 76 Dental Consumable- Varnish 77 Dental Consumable- Wire No. 21,23,25 78 Dental Consumable- X- Rays Film 79 Dental Consumable- X- Rays Film (Pedo) 80 Dental Consumable- Zinc Oxide Powder 81 Dental Consumable- Zinc Phosphate Cement 82 Dental Equipment- Air Motor 83 Dental Equipment- Air Polisher 84 Dental Equipment- Airotor H/P 85 Dental Equipment- Amalgamator 86 Dental Equipment- Apex Locator 87 Dental Equipment- Autoclave (Front Loading) 88 Dental Equipment- Autoclave (Top Loading) 89 Dental Equipment- Automatic Developer 90 Dental Equipment- Bleaching Machine 91 Dental Equipment- Copmressor 92 Dental Equipment- Dental Chair 93 Dental Equipment- Endo Motor 94 Dental Equipment- Glass Bead Sterilizer 95 Dental Equipment- Intra Oral Camera 96 Dental Equipment- Light Cure 97 Dental Equipment- Micro Motor 98 Dental Equipment- Micro Motor Contra H/P 99 Dental Equipment- Micro Motor Lab. 100 Dental Equipment- Micro Motor Straight H/P 101 Dental Equipment- Motorized Suction 102 Dental Equipment- Needle Burner Cum Syringe Cutter 103 Dental Equipment- Pulp Tester 104 Dental Equipment- Rvg 105 Dental Equipment- Spot Welder 106 Dental Equipment- Ultra Sonic Cleaner 107 Dental Equipment- Ultra Sonic Scaler 108 Dental Equipment- Ultraviolet Cabinet 109 Dental Equipment- Water Distiller 110 Dental Equipment- X-Rays Machine 111 Dental Equipment- X-Rays Reader 112 Dental Instrument- Amalgam Carrier 113 Dental Instrument- Artery Forceps 114 Dental Instrument- B.P. Handle 115 Dental Instrument- Ball Burnisher 116 Dental Instrument- Bone Chisel 117 Dental Instrument- Bone Curette 118 Dental Instrument- Bone File 119 Dental Instrument- Bone Rounger 120 Dental Instrument- Castivigo Scissor 121 Dental Instrument- Cement Spatula 122 Dental Instrument- Chital Forceps 123 Dental Instrument- Crown Remover 124 Dental Instrument- Diamond Carver 125 Dental Instrument- Elevator 126 Dental Instrument- Elevator Cross Bar 127 Dental Instrument- Ellis Tissue Forceps 128 Dental Instrument- Enamel Chisel 129 Dental Instrument- Enamel Hatcgets 130 Dental Instrument- Enamel Hoe 131 Dental Instrument- Explorer 132 Dental Instrument- Extraction Forceps 133 Dental Instrument- Extraction Forceps (Pedo) 134 Dental Instrument- G.M.T. Distal 135 Dental Instrument- G.M.T. Missal 136 Dental Instrument- Gracy Curettes 137 Dental Instrument- Hand Scaler 138 Dental Instrument- Hollen Back Carver 139 Dental Instrument- Impression Tray Dentulous 140 Dental Instrument- Impression Tray Edentulous 141 Dental Instrument- Lecorn Carver 142 Dental Instrument- Meltet 143 Dental Instrument- Moons Probe 144 Dental Instrument- Mouth Gag 145 Dental Instrument- Mouth Mirror With Handle 146 Dental Instrument- Needle Holder 147 Dental Instrument- Needle Holder With Cutter 148 Dental Instrument- Parallelogram Condenser 149 Dental Instrument- Periostal Elevator 150 Dental Instrument- Plaster Knife 151 Dental Instrument- Plaster Spatula (Curved) 152 Dental Instrument- Plaster Spatula (Straight) 153 Dental Instrument- Plastic Filling Instrument 154 Dental Instrument- Plier 155 Dental Instrument- Probe 156 Dental Instrument- Round Condenser 157 Dental Instrument- Scissors 158 Dental Instrument- Spoon Excavator 159 Dental Instrument- Suture Cutting Scissors 160 Dental Instrument- Tissue Holding Forceps (Non Tooth) 161 Dental Instrument- Tissue Holding Forceps (Tooth) 162 Dental Instrument- Toffilmar Ratenier 163 Dental Instrument- Tweezers 164 Dental Instrument- Tweezers (Locking) 165 Dental Instrument- Wards Carver 166 Dental Instrument- Wax Carver 167 Dental Instrument- Wax Knife 168 Dental Instrument- Willium Probe 169 Dental Non Consumable- Agate Spatula 170 Dental Non Consumable- Amalgam Carrier (Plastic) 171 Dental Non Consumable- Articulator 3 Points 172 Dental Non Consumable- Articulator Hinge 173 Dental Non Consumable- Blow Torch 174 Dental Non Consumable- Bur Box 175 Dental Non Consumable- Cheek Retractor 176 Dental Non Consumable- Chip Syringe 177 Dental Non Consumable- Clamp 178 Dental Non Consumable- Cotton Holder 179 Dental Non Consumable- Dappen Dish 180 Dental Non Consumable- Developer Box 181 Dental Non Consumable- Endo Box 182 Dental Non Consumable- Endo Gauge 183 Dental Non Consumable- File Full Round 184 Dental Non Consumable- File Half Round 185 Dental Non Consumable- Flask 186 Dental Non Consumable- Fox Plate (Plastic) 187 Dental Non Consumable- Gas Burner 188 Dental Non Consumable- Glass Slab (Large) 189 Dental Non Consumable- Glass Slab (Small) 190 Dental Non Consumable- Hot Plate 191 Dental Non Consumable- Impression Tray (Plastic) 192 Dental Non Consumable- Instrument Tray (Plastic) Large 193 Dental Non Consumable- Instrument Tray (Plastic) Small 194 Dental Non Consumable- Mackintosh Sheet 195 Dental Non Consumable- Mandrill 196 Dental Non Consumable- Matrix Retainer No. 01 197 Dental Non Consumable- Matrix Retainer No. 08 198 Dental Non Consumable- Mortal Pastle 199 Dental Non Consumable- Mouth Prop 200 Dental Non Consumable- Patient Drape 201 Dental Non Consumable- Porceline Jar 202 Dental Non Consumable- Rubber Bowls (Large) 203 Dental Non Consumable- Rubber Bowls (Small) 204 Dental Non Consumable- Shade Guide 205 Dental Non Consumable- Sprit Lamp 206 Dental Non Consumable- Towel Clip 207 Dental Non Consumable- Utility Tray 208 Dental Non Consumable- Waste Receiver 209 Dental Non Consumable- Water Filter 210 Dental Non Consumable- Wire Cutter 211 Dental Non Consumable- X-Rays Clip 212 Dental Non Consumable- X-Rays Holder 213 Equipment- Refrigerator 165 Ltr 214 Equipment- Refrigerator 220 Ltr 215 Equipment- Refrigerator 280 Ltr 216 Furniture- Office Chair With Cusion Steel Fraim 217 Furniture- Wooden Table With One Drawer And Cabinet Both Side Size 5X3 Feet 218 Furniture- Wooden Table With One Drawer And Cabinet Both Side Size 5X3 Feet 219 Hospita; Fowler With Matress 220 Hospital Furn- Gi Stapler – Disposable Linear Cutter 221 Hospital Furn- Glass Door Cabinet 6*3 222 Hospital Furn- Hospital Bed With Matress 223 Hospital Furn- Labour Table Manual With Matress 224 Hospital Furn- Linen Box 3X4 225 Hospital Furn- Linen Box 3X6 Galwnised 226 Hospital Furn- Medicine Trolly 227 Hospital Furn- Office Almirah Big 228 Hospital Furn- Office Almirah Small 229 Hospital Furn- Patient Stool Fixed 230 Hospital Furn- Patient Stool Revolving 231 Hospital Furn- Patient Trolly Ss Squire Pipe Havy Duty 232 Hospital Furn- Semi Fowler With Matress 233 Hospital Furn- Shoe Rack Steel 3X3 With 4 Selve 234 Hospital Furn- Side Reling Ss For Hosspital Bed 235 Hospital Furn- Bed Side Locker Ss Top 236 Hospital Furn- Bed Side Screen Ss, 3 Fold With Curtain 237 Hospital Furn- Biowaste Bucket 25 Kg Foot Operated All Colour 238 Hospital Furn- Bmw Bucket Stand Steel Fraim For Three Bucket 239 Hospital Furn- Examination Chair 240 Hospital Furn- Examination Light Moovable With Stand 241 Hospital Furn- Examination Table 242 Hospital Furn- Double Step Stool 243 Hospital Furn- Dressing Trolly Ss 244 Hospital Furn- Examination Couch With Matress And Double Step Stool 245 Hospital Furn- Crash Cart 246 Hospital Furn- Ecg Monitor Trolly 247 Hospital Furn- Linen Trolly 248 Hospital Furn- Mayo Instrument Trolly Ss 249 Instrument- Bed Pan Ss 250 Instrument- Bp Machine Diamond Analoge 251 Instrument- Bp Model 1320 Omron 252 Instrument- Dressing Drum Ss Haevy 11X11 253 Instrument- Dressing Drum Ss Haevy 12X12 254 Instrument- Dressing Drum Ss Haevy 9X11 255 Instrument- Dressing Drum Ss Haevy 9X9 256 Instrument- Forcep Artery 257 Instrument- Humidification Chamber (Hfnc) 258 Instrument- Kidney Tray Ss Big 259 Instrument- Kidney Tray Ss Medium 260 Instrument- Kidney Tray Ss Small 261 Instrument- Larriango Scope 2 Blade 262 Instrument- Larriango Scope 3 Blade 263 Instrument- Larriango Scope 4 Blade 264 Instrument- Nebulizer 265 Instrument- Paediatric Stethoscope 266 Instrument- Stadiometer 267 Instrument- Stethoscope Isi 268 Instrument- Tailor Scissor Big With Brass Handle 269 Instrument- Temperature Probe – Oral/Axillary (Disposable Cover) 270 Instrument- Thermameter Refrigeratore 271 Instrument- Thermameter Room 272 Instrument- Urine Pot Ss For Female 273 Instrument- Urine Pot Ss For Male 274 Instrument- Weight Machine Adult Electronics 275 Instrument- Weight Machine Child Electronics 276 Instrument- Weight Machine Neonatal Electronics With Tray 277 Instrument- B P Aparatus Omron Model No Hbp 9030 278 Instrument- Digital Thaermameter 279 Instrument- Slow Suction Apparatus Electric 280 Instrument- Bone Hook 281 Instrument- Enema Syringe 282 Instrument- Forcep Allis Tissue Large 283 Instrument- Forcep Allis Tissue Medium 284 Instrument- Forcep Allis Tissue Small 285 Instrument- Forcep Artery Curved Small 286 Instrument- Forcep Artery Curved Large 287 Instrument- Forcep Artery Curved Medium 288 Instrument- Forcep Artery Kocker 289 Instrument- Forcep Artery Straight Small 290 Instrument- Forcep Artery Straight Large 291 Instrument- Forcep Artery Straight Medium 292 Instrument- Forcep Babcock Large 293 Instrument- Forcep Babcock Medium 294 Instrument- Forcep Babcock Small 295 Instrument- Forcep Chittels Large 296 Instrument- Forcep Chittels Medium 297 Instrument- Forcep Chittels Small 298 Instrument- Forcep Littlewood 299 Instrument- Forcep Mosquito Curved 300 Instrument- Forcep Mosquito Staight 301 Instrument- Forcep Needle Holder Large 302 Instrument- Forcep Needle Holder Medium 303 Instrument- Forcep Needle Holder Small 304 Instrument- Forcep Spencser Wall 305 Instrument- Forcep Sponge Large 306 Instrument- Forcep Sponge Medium 307 Instrument- Forcep Sponge Small 308 Instrument- Forcep Tissue Grasping 309 Instrument- Forcep Tissue Teeth 310 Instrument- Forcep Tonsil Holding 311 Instrument- Forcep Towel Holder Big 312 Instrument- Forcep Towel Holder Medium 313 Instrument- Forcep Towel Holder Small 314 Instrument- Forcep Valsullum 315 Instrument- Instument Tray Ss With Lid 12X12 316 Instrument- Instument Tray Ss With Lid 12X8 317 Instrument- Instument Tray Ss With Lid 18X12 318 Instrument- Instument Tray Ss With Lid 6 X12 319 Instrument- Instument Tray Ss With Lid 8X6 320 Instrument- Measuring Jug 2000Ltr 321 Instrument- Plaster Sprader 322 Instrument- Pneumatic Torniquet 323 Instrument- Reflex Hammer 324 Instrument- Sciessor Stich Cutting 325 Instrument- Scissor Episotamy 326 Instrument- Scissor Episotamy 327 Instrument- Scissor Episotamy 328 Instrument- Scissor Mayo 329 Instrument- Scissor Mayo Dressing 330 Instrument- Slide Rack 331 Instrument- Splint Cockup 332 Instrument- Splint Kendrick 333 Instrument- Splint Padded 334 Instrument- Splint Traction 335 Instrument- Vaginal Spacullum Grave 336 Instrument- Vaginal Spacullum Sims 337 Material- Abdominal Mop With Radio-Opaque Line 338 Material- Abdominal Peritoneal Irrigation Set 339 Material- Abdominal Wound Closure Strips (Steri-Strip Type) 340 Material- Absorbable Haemostatic Gelatin Sponge 341 Material- Acetic Acid 3–5% For Via/Colposcopy 342 Material- Adhesive Zinc Oxide Tape 343 Material- Alcohol Swab 344 Material- Alluminium Foil Roll 345 Material- Anaesthesia Breathing Circuit (Disposable) 346 Material- Anaesthesia Breathing Circuit (Reusable) 347 Material- Anaesthesia Face Mask (Silicon, Reusable) 348 Material- Anterior Nasal Pack (Merocel) 349 Material- Antibiotic Tulle Dressing – 10 × 10 Cm 350 Material- Antibiotic Tulle Dressing – 10 × 30 Cm 351 Material- Autoclave Heating Element 4000 Wt 352 Material- Autoclave Heating Element 6000 Wt 353 Material- Autoclave Pouches (Self-Sealing) 354 Material- Bakari Baloon 355 Material- Bed Sheet – Hospital Grade White 356 Material- Beeker Glass 100 Ml 357 Material- Beeker Glass 1000 Ml 358 Material- Beeker Glass 500 Ml 359 Material- Bp Machine Bulb 360 Material- Bp Machine Culff 361 Material- Bulb Syringe / Neonatal Suction Bulb 362 Material- Burn Dressing – Framycetin 1% Impregnated Tulle 363 Material- Capnography Sampling Line (Sidestream) 364 Material- Catgut Chromic 1 No 365 Material- Catgut Chromic 1-0 366 Material- Catgut Chromic 2-0 367 Material- Catgut Chromic Size 1 368 Material- Catgut Chromic Size 2 369 Material- Catgut Chromic2 No 370 Material- Cervical Collar – Hard 371 Material- Cervical Collar – Soft 372 Material- Chest Compression Board / Backboard 373 Material- Chest Drainege Catheter 374 Material- Chest Electrode Disposable 375 Material- Close Wound Suction 10 No 376 Material- Close Wound Suction 12 No 377 Material- Close Wound Suction 8 No 378 Material- Clossed Circuit Tubing 379 Material- Collagen Sheet (Wound Dressing) 380 Material- Condom Catheter Uterine Balloon (Low-Cost Pph Kit) 381 Material- Confrence Mike And Receiver Set 382 Material- Conical Flask 500Ml 383 Material- Consumable- X Ray Lead Letter Number 384 Material- Cotton Crepe Bandage – 10 Cm × 4 M 385 Material- Cotton Crepe Bandage – 6 Cm × 4 M 386 Material- Cotton Pad Cast For Plaster 387 Material- Cpap Nasal Prongs/Mask (Neonatal) 388 Material- Cresol With Soap Solution 50% 389 Material- C-Section Ot Drape Set – Sterile Disposable 390 Material- Ctg Paper Roll 391 Material- Defibrillator Gel / Pads 392 Material- Defibrillator Pads (Adult – Adhesive) 393 Material- Defibrillator Pads (Paediatric – Adhesive) 394 Material- Diathermy Return Electrode (Grounding Pad) 395 Material- Disposable Biopsy Needle (Trucut) 396 Material- Disposable CuscoS Speculum (Vaginal) 397 Material- Disposable Electrosurgical Pencil 398 Material- Disposable Laryngoscope Blade – Adult 399 Material- Disposable Laryngoscope Blade – Paediatric 400 Material- Disposable Plastic Apron 401 Material- Disposable Pricking Needle 402 Material- Disposable Shoe Cover 403 Material- Disposable Skin Stapler 404 Material- Disposable Surgeon Cap 405 Material- Disposable Surgeon Gown 406 Material- Disposable Under-Pad 407 Material- Disposable Ventilator Circuit (Adult) 408 Material- Disposable Ventilator Circuit (Neonatal/Paediatric) 409 Material- Double Lumen Central Venous Catheter Kit 410 Material- Drain Bag (Closed Wound Suction) 411 Material- Draip Sheet 412 Material- Ear Wick (Merocel / Pope Wick) 413 Material- Elastic Adhesive Bandage 414 Material- Elastic Adhesive Bandage 415 Material- Epidural Kit 16 No 416 Material- Epidural Kit 18 No 417 Material- Exchange Transfusion Set 418 Material- Falope Ring (Silastic) With Applicator – Ltt 419 Material- Filshie Clip With Applicator – Female Sterilisation 420 Material- Glutaraldehyde / Formaldehyde Fogging Solution 421 Material- Glutaraldehyde Solution 2% 422 Material- Green Armytage Clamp – Disposable (C-Section) 423 Material- Grommet (Tympanostomy Tube) 424 Material- Haemoglobin Measuring Strip/Cuvette 425 Material- Haemostatic Gauze (Chitosan-Based) 426 Material- Hand Wash 500Ml With Dispancer 427 Material- Hand Wash Solution 5 Lt 428 Material- Head Immobiliser / Cervical Immobilisation Blocks (Disposable) 429 Material- Heated Breathing Circuit 430 Material- Hernia Polypropylene Mesh – 10×15 Cm 431 Material- Hernia Polypropylene Mesh – 6×11 Cm 432 Material- Iccu Bed With Matress 433 Material- Icd (Intercostal Drainage) Kit 434 Material- Indicator Tape 435 Material- Infant Mucus Extractor 436 Material- Infant Urethral Catheter (Feeding Tube Type) 437 Material- Insulin Syringe 438 Material- Insulin Syringe (40 Iu) 439 Material- Insuline Pen 440 Material- Insuline Pen Needle 30 No 441 Material- Intraosseous Needle 442 Material- Intrauterine Balloon Tamponade – Pph 443 Material- Iud Insertion Kit (Disposable) 444 Material- J-J Stent (Double-J Ureteric Stent) 445 Material- Kelly Pad (Mackintosh With Cotton Cover) 446 Material- Kellys Pad 447 Material- Labour Table Matress 448 Material- Laparoscopic Specimen Retrieval Bag 449 Material- Laparoscopic Trocar – Disposable 450 Material- Laryngeal Mask Airway (Lma) 451 Material- Leep Loop Electrode (Disposable) 452 Material- Long Line Silicone Catheter 453 Material- Malecot Catheter – Self-Retaining 454 Material- Matress For Hospital Bed Raxine Cover 455 Material- Mattress Cover (Waterproof) 456 Material- Measuring Cylinder Glass 100 Ml 457 Material- Measuring Cylinder Glass 1000 Ml 458 Material- Measuring Cylinder Glass 500 Ml 459 Material- Micro Glass Slide 75X25Mm Packet Of 50 Slide 460 Material- Micropipette Tips 1000Ul 461 Material- Micropipette Tips 100Ul 462 Material- Micropippette Fixed 1000Ul 463 Material- Micropippette Fixed 100Ul 464 Material- Micropippette Fixed 10Ul 465 Material- Micropippette Tips 10 To 100 Micron Microlitre 466 Material- Micropippette Variable 467 Material- Microporous Paper Surgical Tape – 1.25 Cm × 9.1 M 468 Material- Microporous Paper Surgical Tape – 2.5 Cm × 5 M 469 Material- Nasopharyngeal Airway 470 Material- Nebulization Kit – Adult 471 Material- Nebulization Kit – Paediatric 472 Material- Negative Pressure Wound Therapy (Npwt) Kit 473 Material- Neonatal Spo₂ Probe (Wrap-Type) 474 Material- Nibp Cuff – Adult (Reusable) 475 Material- Nibp Cuff – Paediatric 476 Material- Ophthalmic Cautery – Disposable Battery 477 Material- Oropharyngeal Airway (Guedel) 478 Material- Ot Table Sheet (Cotton, Sterile) 479 Material- Paraffin Gauze – Non-Medicated Tulle 480 Material- Pelvic Floor / Perineal Irrigation Set 481 Material- Perinium Sheet 482 Material- Pillow – Hospital Grade 483 Material- Plaster Of Paris Bandage – 10 Cm × 2.7 M 484 Material- Plaster Of Paris Bandage – 15 Cm × 2.7 M 485 Material- Posterior Nasal Balloon Tampon 486 Material- Povidone-Iodine Solution 5% 487 Material- Povidone-Iodine Surgical Scrub 7.5% 488 Material- Pregnancy Test Card (Hcg Dip-Strip) 489 Material- Pressure Infusion Bag 490 Material- Puncture Proof Container White 5 Ltr 2 Ltr 491 Material- Puncture Proof Container 5 Ltr, Blue 492 Material- Puncture Proof Continer 5 Ltr Blue 493 Material- Puncture Proof Continer 5 Ltr White 494 Material- Radiant Warmer Probe (Skin) 495 Material- Readymade Door Curtain 7X4 496 Material- Resuscitation Kit 497 Material- Reusable Autoclavable Laryngoscope Handle 498 Material- Rubber Sheet (Mackintosh) 499 Material- Simple Oxygen Face Mask – Adult 500 Material- Simple Oxygen Face Mask – Paediatric 501 Material- Soap Dispancer Manual 502 Material- Soap Dispancer Non Touch 503 Material- Soda Lime Granules / Co₂ Absorbent 504 Material- Sodium Hypochlorite 5% Solution 505 Material- Soft Roll (Orthopaedic Padding) 506 Material- Spo₂ Probe – Adult (Reusable) 507 Material- Spo₂ Probe – Paediatric (Disposable) 508 Material- Steam Sterilization Indicator Strip (Class V) 509 Material- Sterile Burn Sheet / Large Burn Dressing 510 Material- Sterile Fenestrated Drape (Minor Procedures) 511 Material- Sterile Laparotomy Drape Set (Disposable) 512 Material- Sterile Medicated Cotton Swab 513 Material- Sterile Skin Prep Razor (Disposable) 514 Material- Sterilized Medicated Gauze Piece 515 Material- Suction Catheter – Neonatal 516 Material- Suction Catheter – Paediatric/Adult 517 Material- Suction Catheter Extension Tubing 518 Material- Surgical Hernia Mesh (Laparoscopic) – Composite 519 Material- Surgical Incise Drape (Antimicrobial) 520 Material- Surgical Spirit 521 Material- Suture Needle 522 Material- Synthetic Splint (Fibreglass Casting Tape) 523 Material- Syringe Infusion Pump Tubing Set 524 Material- Tissue Paper Roll 525 Material- Titanium Laparoscopic Clip Applicator 526 Material- Towel – Hospital Grade Patient Use 527 Material- T-Piece Resuscitator (Neopuff) 528 Material- Tracheostomy Tube (Cuffed, Pvc) 529 Material- Tracheostomy Tube (Uncuffed, Pvc) 530 Material- Traction Weight Set 531 Material- Transparent Film Dressing 532 Material- Triple Lumen Central Venous Catheter Kit 533 Material- Triway Extension Canula 534 Material- Urethral Dilator Bougie Set 535 Material- Urine Drainage Bag 536 Material- Urine Drainage Bag (Paediatric) 537 Material- Venturi Mask – Adult 538 Material- Volumetric Infusion Pump Iv Set 539 Material- Yankauer Suction Catheter 540 Material- Baby Bed Sheet Coloured 541 Material- Baby Bed Sheet White 542 Material- Cast Padding Soft Roll 200 Gm-Surgical 543 Material- Cast Padding Soft Roll 400 Gm-Surgical 544 Material- Disposable Bed Sheet 545 Material- Disposable Sterile Gloves 6 No Per Pair Isi Mark-Surgical 546 Material- Disposable Sterile Gloves 6.5 No Per Pair Isi Mark-Surgical 547 Material- Disposable Sterile Gloves 7 No Per Pair Isi Mark-Surgical 548 Material- Disposable Sterile Gloves 7.5 No Per Pair Isi Mark-Surgical 549 Material- Follyes Baloon Catheter 14 Fr-Surgical 550 Material- Gel Matrix Blood Grouping Card 48 Test-Lab Item 551 Material- Gel Matrix Cross Match Card 148 Test-Lab Item 552 Material- Gel Matrix Lyse 250 Ml 01 No-Lab Item 553 Material- Intravenus Set Adlut With Airway -Surgical 554 Material- Intravenus Set Child With Airway -Surgical 555 Material- Mother & Baby Identification Wrist Band Pair 556 Material- P O P Powder Per Kg 557 Material- Spinal Needle 23 No-Surgical 558 Material- Spinal Needle 24 No-Surgical 559 Material- Sterile Gauze Swab 10X10 8 Ply 560 Material- Usg Thermal Paper 110X20 561 Material- Epidural Catheter 16, 18 562 Material- Romo Adk 563 Material- Surgical Blade 11 No 564 Medicine- Cabergolin 0.5Mg Tab 565 Medicine- Chlorhexidine Digluconate 7.1% Gel (Cord Care) 566 Medicine- Lignocaine Hcl Jelly 5% W/W 567 Medicine- Lignocaine Spray 10% 568 Medicine- LugolS Iodine 5% (For Vili Screening) 569 Medicine- Tab Letrozole 2.5 570 Medicine- Tab Palbociclip 75 Mg 571 Medicine- Anti Cold Drop 15 Ml 572 Medicine- Arginine Sachet-Medicine 573 Medicine- Bupivacaine Hcl5 Mg Dextrose 5%-Medicine 574 Medicine- Di Sodium Hydrogen Citrate 100 Ml 575 Medicine- Dicyclamin Drop 15 Ml 576 Medicine- Halothane Inhalation-Medicine 577 Medicine- Hepatitis B Imunoglobin 578 Medicine- Hydroxy Uria 200 Mg Tab/Cap 579 Medicine- I.V. Amino Acids And Sorbitol 500Ml (L-Isoleucine, L-Leucine, L-Lysine Hcl, L-Methionine, L-Phenylalanine, L-Theonine, L-Tryptophan, L-Valine, L-Arginine, L-Histidine, Glycine, L-Alamine, L-Glutamic Acid, L-Asparic Acid, L-Proline, L-Seine, L-Tyrosine, L-Cystine & Sorbitol)-Medicine 580 Medicine- I.V. Amino Acids With Electrolytes 500Ml (L-Isoleucine, L-Leucine, L-Lysine Hcl, L-Methionine, L-Phenylalanine, L-Threonine, L-Tryptophan, L-Valine, L-Arginine, L-Histidine, Glycine, L-Alamine, L-Glutamic Acid, L-Aspartic Acid, L-Asparagine, L-Cyestine, L-Glutamic Acid, L=Ornithine, L-Seine, L-Tyrosine, Acetyltyrosine, L-Malic Acid, Sodium Acetate, Potassium Acetate,Magnesium Acetate,Sdoium Dihydrogen Phosphate)(Electrolytes Na+, K+, Mg+,Acetate, H2Po4,L-Malate, Total Amino Acids)-Medicine 581 Medicine- Iron With Multivitamin Syp 200 Ml 582 Medicine- Levosalbutamole Ipratropium Respule 583 Medicine- Multi Vitamin With Proteen Syp 200 Ml 584 Medicine- Multivitamin Drop 15 Ml 585 Medicine- Paracetamol Drop 15 Ml 586 Medicine- Sporolac Sachets 587 Medicine- Tuberculin P.P.D. 2Tu/0.1Ml (Mantoux Test) Each-Medicine 588 Medicine- Activated Charcol 589 Medicine- Spironolactone 50 Mg 590 Physiotherapy- Hand Exerciser 591 Physiotherapy- Parafin Wax Bath 592 Physiotherapy- Physio Ball 593 Physiotherapy- Short Wave Diathermy 594 Physiotherapy- Static Cycle Exerciser 595 Physiotherapy- Tens Machine 596 Physiotherapy- Ultrasonic Therapy Unit 597 Physiotherapy- Walky Crulches 598 Radiology- X Ray Film Cassettes 599 Radiology- X Ray Lead Appron 600 Radiology- X Ray Lead Gloves 601 Radiology- X Ray View Box 2 Tube Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Madhya Pradesh View Result →
4.
Power #11242531 Price Bid
Tender for Jharkhand Urja Sancharan Nigam Limited Tender Inviting Authority :- General Manager, Transmission Zone-Vi, Deoghar Price Part-Ii E-Nit No. 141/Pr/Jusnl/2026-27 Name Of Work Annual Maintenance Work Of 132/33 Kv Grid Sub Station, Kundhit For The Period From 01.06.2026 To 31.03.2027 (I.E. 10 Months) For F.Y. 2026-27. Name Of The Bidder S/N Description Unit Qty Months Qty. Unit Rate Amount , Supply Of Manpower For Preventative / Routine Maintenance Of Grid Substation As Per Schedule Provided By Engineer In-Charge: - A Skilled ( Electrician / Technician) Mandays 2.0 10.0 20.0 18075.05 361501.0 B Un-Skilled Helper Mandays 2.0 10.0 20.0 13088.1 261762.0 , Supply Of Manpower For Regular Cleaning/ Sweeping Of Control Room Building, Bathrooms, Offices, Stores, Battery Room, Approach Road And Surrounding Areas Etc As Per Direction Of Engineer In-Charge A Un-Skilled Labour Mandays 1.0 10.0 10.0 13088.1 130881.0 , Break Down/Shutdown Maintenance Of Grid Sub-Station :- A Supply Of Emergency Gang With T&P For Work Like Conductor Snapping Of Main Bus Etc. Per Gang 1.0 - 1.0 30286.81 30286.81 30286.81 , Erection, Connection, Testing And Commissioning Of Following Equipments With Crane/Derrick At Site Including Handling The Material/Equipments Carefully At Site Including Labour Charges For All Incidental And Operational Items Of Work (Excluding Cost Of Transportation Charges From Store To Site.) I Erection, Testing And Commissioning Of 33Kv Ct Or Pt Nos. 2.0 - 2.0 2476.86 4953.72 2476.86 Ii Erection, Testing And Commissioning Of 33Kv La Nos. 2.0 - 2.0 1415.52 2831.04 1415.52 Iii Erection Of 33 Kv Vacuum Circuit Breaker Including Cable Termination Nos. 1.0 - 1.0 16511.62 16511.62 16511.62 Iv Erection Of 132 Kv Ct Or Pt Or Cvt Including Cable Termination Nos. 2.0 - 2.0 7549.0 15098.0 7549.0 V Erection Of 132 Kv La Including Cable Termination Nos. 2.0 - 2.0 3302.08 6604.16 3302.08 , Dismantling Of Following Equipments With Crane/Derrick At Site Including Handling The Material/Equipments Carefully At Site Including Labour Charges For All Incidental And Operational Items Of Work (Excluding Cost Of Transportation Charges From Store To Site.) I Dismantling Of 33Kv Ct Or Pt Nos. 2.0 - 2.0 1040.2812 2080.56 1040.2812 Ii Dismantling Of 33Kv La Nos. 2.0 - 2.0 594.5183999999999 1189.04 594.5183999999999 Iii Dismantling Of 33 Kv Vacuum Circuit Breaker Including Cable Termination Nos. 1.0 - 1.0 6934.880399999999 6934.88 6934.880399999999 Iv Dismantling Of 132 Kv Ct Or Pt. Nos. 2.0 - 2.0 3170.5799999999995 6341.16 3170.5799999999995 V Dismantling Of 132 Kv La Nos. 2.0 - 2.0 1386.8735999999997 2773.75 1386.8735999999997 , Supply Of Hydra / Crane (Upto 08 Mt Capacity) As Per Requirement. Add. Hrs. 4.0 - 4.0 1160.0 4640.0 1160.0 , Engagement Of Hydraulic Excavator (Jcb) As Per Requirement & Direction Of E/I , Complete Overhauling Of Cooling Fans Of 50 Mva/ 20 Mva Power Transformer With Supply Of All Materials If Required Any. , Transportation Of Transformer Accessories/ Fittings, Other Gss Equipment, Through Truck / Pickup From Transmission Central Store Deoghar & Other Gss/Sites To Gss Kundhit Including Loading, Unloading Of The Equipment/Materials In Proper Packing (Before Loading) & (After Loading) Upto 3 Mt (I) Upto First 50 Km Trip 2.0 - 2.0 4992.0 9984.0 4992.0 (Ii) 50 Km Distance 500 Km (Rate Per Km) Km 100.0 - 100.0 27.0 2700.0 27.0 , Repair And Overhauling Of 3 Ph Submersible Pump Set Including Cost Of Materials, Lifting & Lay Down Of Submersible Pump From Borewell, Repair Of Water Supply Pipe All Complete Job And Transportation Construction , Testing Transformer Oil By Recognized Laboratory Including Supply Of Sampling Bottle. (These Tests Are Mandatory And Must Be Completed By The End Of December, 2026) :- (I) Bdv Nos. 2.0 - 2.0 1420.0 2840.0 1420.0 (Ii) Dga Nos. 2.0 - 2.0 6930.0 13860.0 6930.0 (Iii) Water Content Ppm Nos. 2.0 - 2.0 1740.0 3480.0 1740.0 (Iv) Contingency (Including Sampling Bottle, Dd Cost To & Fro Charges With Fooding & Lodging) Nos. 1.0 - 1.0 3559.5 3559.5 3559.5 , Supply Of Consumables Viz. Markin Cloth, Cotton Waste, Joute, Distilled Water, Brush, Ht Nuts & Bolts, Patrollium Jelly, Grease, Kerosine, Petrol, Mobil, Wd-40 Rust Remover,... Etc Whatever Required Time To Time For O&M Work Of G/S/S. , Maintenance Of 100Kva Dg Set (Replacement Of Air & Fuel Filter, Gasket Valve Cover, Engine Tube Oil Etc.) , Provision Of Diesel Fuel For 100 Kva Dg Set For Running Of Dg Set. , Air Condition Annual Maintenance Charge With All Spares At 132/33Kv Gss Kundhit By Manufactured Service Engineer A Gas Filling Charge Nos. 4.0 - 4.0 4000.0 16000.0 4000.0 B Annual Maintenance With All Spares Nos. 12.0 - 12.0 8000.0 96000.0 8000.0 , Assessment Of Defects In Battery Chargers And Minor Repairing Sub-Total (A) For Sl. No.- 1, 2 & 3 754144.0 Approximate Increase In Vda During A Year @10% On Sub Total (A) 75414.40000000001 Sub-Total (B) 829558.4 Sub-Total (C) For Sl. No. 3 To 16 394471.94 For S.N. 03 To 16, Rate To Be Quoted By Bidder In % (Percentage) Select Criteria From Below Put Rate In Case Of Above Or Below Select Any One From Criteria : Above/ Below/Estimated Construction Estimated Cost 0.0 Overhead Expenditure For T&P Etc. @ 03% On Sub-Total (B) 24886.75 Contractor Profit On Total (B) @ (To Be Quoted By Bidder In Digit Only Upto Two Decimal Places Only) (Note-Maximum 10% And Not Below Than 0%) 0.0 0.0 Epf Contribution Of Employer@12% On Sub Total (B) 99547.01 Esic Contribution Of Employer @ 3.25% On Sub Total (B) 26960.65 Administrative Charges @ 0.5% On Sub Total (B) 4147.79 Edli (@ 0.5% Of Wages For The Wages Below Than Rs. 15000/- And Maximum To Rs. 75/- For The Wages Above Than Rs. 15000/- Per Manpower Per Month) On Sl. No.- 1, 2 & 3 3659.54 Sub Total (D) 1383232.08 Cgst @ 9% On Sub-Total (D) 124490.89 Sgst @ 9% On Sub-Total (D) 124490.89 Total 1632213.8599999999 Labour Cess @ 1% 16322.14 Gross Total 1648535.9999999998 Say 1648536.0 Amount In Words Note: Bidder Will Fill Their Name And Quote Percentage In Given Format.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Jharkhand View Result →
5.
Health and Family Welfare #11114831 Technical Bid
Procurement Of Disposable And Implants Items For Ctvs Department Rgssh , Part-01 , Oxygenatormembrane(Adult) With Hard Shell Reservoir: 1. Shouldhaveamicroporoushollowfibre Membrane Oxygenator 2. Should Have Open Circuit Configuration 3. Should Have Hard Shell Venous Reservoir Of Capacity More Than 4000Ml. With Built Of Cardiotomy Reservoir With 30? Filter Capacity. 4. Shouldhavebloodflowrange0.5Ltrto7 Ltr/Min. 5. Should Have Priming Volume Less Than 220Ml 6. Should Have High Efficiency Heat Exchanger. 7. Venous Return Port ½” With Rotating Facility. 8. Should Have An Auto Vent Facility. 9. Port Size : Arterial Outlet, Venous Outlet 3/8” Venous Inlet ½” 10. Should Have Sampling Port. , Oxygenator Membrane (Semi-Adult) With Hard Shell Reservoir: 1. Shouldhaveamicroporoushollowfiber Membrane Oxygenator 2. Should Have Open Circuit Configuration 3. Should Have Hard Shell Venous Reservoir Of Capacity More Than 3000Ml. With Built Of Cardiotomy Reservoir With 30? Filter Capacity. 4. Should Have Blood Flow Range 0.5 Ltr To 3.5 Ltr/Min. 5. Should Have Priming Volume Less Than 180Ml 6. Should Have High Efficiency Heat Exchanger 7. Venous Return Port 3/8” With Rotating Facility. 8. Should Have An Auto Vent Facility. 9. Port Size : Arterial Outlet, Venous Outlet 3/8” Venous Inlet 3/8” 10. Should Have Sampling Port. , Oxygenator Membrane (Paed.) With Hard Shell Reservoir: 1. Should Have A Microporus Hollow Fiber Membrane Oxygenator 2. Should Have Open Circuit Configuration 3. Should Have Hard Shell Venous Reservoir Of Capacity More Than 1000Ml. With Built Of Cardiotomy Reservoir With 30? Filter Capacity. 4. Should Have Blood Flow Upto 2.8 Ltr/Min. 5. Should Have Priming Volume Less Than 140Ml 6. Should Have High Efficiency Heat Exchanger. 7. Venous Return Port 3/8” With Rotating Facility And Redurs 8. Should Have An Auto Vent Facility. 9. Port Size : Arterial Outlet 1/4”, Venous Inlet 3/8” With Redurs , Oxygenator Membrane (Neonatal): 1. Should Have Venous Inlet ¼”. 2. Arterial Outlet Port ¼” Tubing Size. 3. It Should Have Least Priming Volume Less Than 70Ml. 4. Arterial Flow Upto 1.2 Ltr/Minute. 5. Approximate Reservoir Capacity Should Not Be 600Ml. 6. Should Have Redurs. 7. Blood Inlet And Outlet Port Size ¼” Redu Able To 3/16”. , Pre-Connected Tubing Pack Adult With Arterial Line Filter: 1. Circuit Diagram Attached. 2. Tubing Should Have Transparent, Medical Implant Grade Pvc Of Class Vi Usp, Marked. , Pre-Connected Tubing Pack Paed. With Arterial Line Filter: 1. Circuit Diagram Attached 2. Tubing Should Have Transparent ,Medical Implant Grade Pvc Of Class Vi Usp, Marked , Pre-Connected Tubing Pack Paediatric Small. With Arterial Line Filter: 1. Circuit Diagram Attached 2. Tubing Should Have Transparent ,Medical Implant Grade Pvc Of Class Vi Usp, Marked , Pre-Connected Tubing Pack Neonatal. With Arterial Line Filter: 1. Circuit Diagram Attached. 2. It Should Have A Good Quality Arterial Filter Pore Size Should Have 35-40 Micron. 3. Tubing Should Have Transparent Medical Implant Grade Pvc Of Class Vi Usp,Marked. , Onlineblood Cardioplegia Delivery System: 1. Should Have In Built High Efficiency Heat Exchanger Of Metallic For Fast Cooling & Re- Warming. 2. Should Have Priming Volume Less Than 80Ml. 3. Should Have Max Flow Rate 1 Ltr/Min 4. Should Have Pressure Drop Not More Than 13Mmhg 500Ml/Min 5. Should Have Blood To Crystalloid Ratio Of 4:1 With Bride Connection Facilities And Interchangeable Tubing Ratio. 6. Should Have Auto-Vent Line System On Accidental Bock Of Cardioplegia Deliver Liner. 7. Pvc Tubing Should Have Medical Implant Grade Of Class Vi ,Usp,Marked. , Ante- Grade Root Cardioplegia Cannula With Side Arm: 1. Should Have Size 12Fr,14 Fr. & 16 Fr. 2. Should Have Regular Tip Stilate With Side Arm For Vent With Flange 3. Selection Strictly On Quality Basis. , Ante- Grade Root Cardioplegia Cannula Without Side Arm: 1. Should Have Size 12Fr, 14 Fr. & 16 Fr. 2. Should Have Regular Tip Stilate With Flange 3. Selection Strictly On Quality Basis. 4. Iso Certification , Coronary Ostial Cannula: 1. Should Have Malleable Shaft, Female Luer Lock, Radio Opaque Flower Tip Selection Strictly On Quality Basis. 2. Size 14, Fr ,12 Fr & 10 Fr , Coronary Ostial Cannula: 1. Should Have Flexible Silicon Pvc Tubing, Female Luer Lock, Radio Opaque Ball Tip Selection Strictly On Quality Basis. 2. Size 12Fr To 20Fr, 14, Fr ,10 Fr 3. Iso Certification , Retrogradecardioplegia Cannula: 1. It Should Auto Inflatable Balloon. 2. Itshouldhavepressuremeasuringline With 3 Way Connector. 3. It Should With Malleable Stilate. 4. Iso Certification , Vent Catheter (Adult): 1. Shouldhaveflexiblewithmalleablestilateand Multiple Side Hole At The Tip Of Cannula 2. The Proximal Part Should Have Memory For Easy Insertion 3. Iso Certification , Ventcatheter (Pead.): 1. Shouldhaveflexiblewithmalleablestilateand Multiple Side Hole At The Tip Of Cannula 2. The Proximal Part Should Have Memory For Easy Insertion 3. Size – 10,13,15, 16 Fr 4. Iso Certification , Rightanglevenouscannula With Wire Re-In-Ford: 1. Shouldhaveflexiblewiringreinforwith Plastic/Metallic Angled Tip. 2. Should Have Depth Marking Assist With Positing. 3. Iso Certification 4. Size : 10,12,14,16,18,20,22,24,26,28,30 Fr. , Singlestagevenouscannula With Wire Re-In-Ford: 1. Should Have Flexible Wire Reinfor, Multiple Side Hole With Smooth Tip. 2. Should Have Depth Marking Assist With Positing. 3. Iso Certification 4. Size : 10,12,14,16,18,20,22,24,26,28,30,32,34, 36 Fr , Two Stage Singlevenous Cannula With Wire Re-In-Ford: 1. Should Have Flexible Wire Reinfor, Multiple Side Hole With Smooth Tip With Side Hole And Stilate. 2. Should Have Depth Marking Assist With Positing. 3. Iso Certification 4. Size 51 X 36Fr, 32 X 40 Fr,34 X 46 Fr, Etc. , Two Stage Single Venous Cannula Flat With Wire Re-In- Ford: 1. Shouldhaveflexiblewirereinfor,Multipleside Hole With Smooth Tip With Side Hole And Stilate. 2. Should Have Flat In Middle 3. Should Have Depth Marking Assist With Positing. 4. Iso Certification 5. Size 51 X 36Fr, 32 X 40 Fr,34 X 46 Fr, Etc. , Clear View Blower: 1. Should Have Malleable Tip With Air Filter 2. Iso Certification , Intra Coronaryshunt: 1. Should Be Flexible. 2. Size 1, 1.25, 1.5, 1.75, 2.0 , 2.25, 2.5Mm 3. Iso Certification , Intra Carotid Shunts: A. Flexible All Sizes 1. It Should Have Inflatable Balloon In Both Ends Of The Lumen (Shunts) 2. Iso Certification , Coronary Artery Epicardial Retraction Clip.: 1. It Should Have Malleable Wire For Better Exposure. 2. Size- 3Mm ,4Mm,5Mm. , Connectors Straight: 1. It Should Be Sterile And Transparent 2. Size Required: ½X ½” , ½ X 3/8” , 3/8 X 3/8” , 3/8 X ¼” . ¼ X ¼” , Connector With Luer Lock: 1. It Should Be Sterile And Transparent 2. Sizes - ½ X ½” , 3/8 X 3/8” 3. Sizes-1/4X14. 3/8X38. 1/4X1/4X1/4 , Y- Connectors: 1. It Should Be Sterile And Transparent. 2. Size : ½X 3/8 X 3/8 , 3/8 X 3/8 X 3/8 ,3/8 X3/8X¼ ,¼X ¼ X 3/8;¼ X ¼ X ¼ , Femoral Venous (Perfusion) Cannula: 1. Should Have Flexible With Wire-Re-In Fordbuilt In Connector With Dilator. 2. Size-10,12,14,16, 18,20,22 & 24 Fr 3. Should Have Iso Certification , Femoral Arterio- Venous (Perfusion) Cannula Kit For Percutaneous Insertion: 1. Arterio -Venous Kit With Dilator And Insertion Kit For Minimal Invasive Cardiac Surgery. 2. All Sizes 3. Kit Should Have Two Seldinger Style Needles. Four Dilators To Guide Wire Length More Than 140Cm Scalpel Blade. 4. Should Have Iso Certification , Femoral-Arterial(Perfusion) Cannula: 1. Should Have Flexible With Wire-Re-In Ford Built In Connector With Dilators. 2. Size- 10,12,14,16,18,20,22 & 24 Fr 3. Iso Approved. , Tieband: Nil , Aortic Cannula With Curve Tip: Should Have Wire Reinford, Side Flange With Curved Tip Size: 16,18, 20, 22, 24 Fr , Aortic Cannula With Curve Tip: Should Have Wire Transparent Reinford, Side Flange With Curvedtip Size: 16,18, 20, 22, 24 Fr , Aortic Cannula With Straight Tip: 1. Size: 10,12,14,16,18,20,22,24 Fr. 2. Shouldhavestraighttipwithsideflangefor Fixation With Auto Venting Facilities. , Paediatric Aortic Cannula.: 1. Should Have Wire Reinford Built In Connector Straight Tip With Movable Auto Venting Stilate For Easy Cannulation. 2. It Should Have / Certification. Size : 8,10,12,14,16 Fr , Arterial Filterpaediatric: 1. Priming Volume Should Not More Than 70Ml Filter Size Should Be 35 To 40? 2. Attached 3/8” Dia. Tubing Loop 3. It Should Have Approved , Sterile Packing Tubing Pvc: 1. Size: (A)½” Dia. Of 10 Feet Length Tubing. (B)3/8” Dia. Of 10 Feet Length Tubing. (C) ¼”Dia. Of 10Feet Length Tubing. 2. Tubing Should Have Medical Implant Grade Of Class Vi Pvc, Usp,Marked. , Cardioplegia Cannula Paed.: 1. Should Be With Stilate And Side Flange For Fixation. 2. Size 18 G Length Of Approx. 6.5Cm , Cardioplegia Cannula Paed.: 1. Should Be With Stilate And Side Flange For Fixation. 2. Size 18 G Length Of Approx. 16Cm , Cononary Ostial Cannula Of Silicon Or Pvc With Side Bulb: 1. Paed & Neonatal With All Sizes , Artriotomy Cannula: 1. Should Have A Polyurethane Tube With Bulb With Female Luer Lock 2. Sizes 2Mm To 6Mm Tip , Ima Cannula With Ball Tip: All Sizes , Double Lumen Venous (Perfusion Cannula): 1. For Veno- Venous Ecmo Support. 2. Shouldhavebloodinletandoutletportwith Connector Certified. 3. All Sizes , Haemoconcentrator Adult: A. It Should Have High Efficiency Haemoconcentrator With Material Of Polysulphone / Polypropylene B. It Should Have Membrane Surfa Area Of 1.0M2 Or Variable To ± 1. C. Primary Volume Of Should Be Less Than 90Ml D. Transmembrane Pressure Should Have Not More Than 500 Mmhg. E. It Should Bewith Tubing Attached/Separate For In And Out Port & Bag. , Haemoconcentrator Peadiatric: A. It Should Have High Efficiency Haemoconcentrator With Material Of Polysulphone / Polypropylene. B. It Should Have Membrane Surfaarea Of 0.7 M2 Or Variable To ± 1. C. Primary Volume Of Should Be Less Than 70Ml. D. Tran Membrane Pressure Should Not Be More Than 500 Mmhg. E.It Should Be Withtubing Attached/Separate For In, Outport& Bag , Haemoconcentrator Neonatal: A. It Should Have High Efficiency Haemoconcentrator With Material Of Polysulphone / Polypropylene. B. It Should Have Membrane Surfa Area Of 0.2 M2 Or Variable To ± 1. C. Primary Volumeshould Not Be More Than 30Ml D. Transmembrane Pressure Should Not Be More Than 500 Mmhg. E. It Should Be With Tubing Attached/Separate For In And Out Port & Bag. , Adult Cardiac Sucker: 1. It Should Be Plastic Bullet Tip With Handle Compatible In ¼”Tubing. 2. Tip Size-5Cm ± 0.5Cm , Paediatric Cardiac Sucker: 1. Itshouldsmallinsize,Plasticbullettipwith Handle Compatible In ¼”Tubing 2. Tip Size-2.5Cm ± 0.5Cm , Pericardial/ Intracardial Sumps: 1. Shouldhaveflutedtipencasedstainlesssteel Sprig. 2. Tip Is Attached To Soft Flexible Tubing Ending With Connector. 3. Sizes 12 Fr To 20 Fr. , Disposable Pressure Transducer Kit.: 1. Kit Should Bewith Disposable Transdur 2 Three Way Stop Cock. 2. Test Port Provision 3. Gold Plated Connector Wires 4. Shouldbecompatiblewiththepresentsetof Monitors. 5. Should Have Integrated Flushing Devi. 6. Shouldhavedifferentcolorcodingforarterial ,Cvp And Pa. 7. Requireinbothsingletransdurkitpackand Double Transdur Kit Pack. 8. Put Arm Strap Provision , Pressure Transducer Kit For Close Blood Sampling.: 1. Kit Should Bewith Disposable Transdur Setwith All Acssory And Cable. 2. Shouldbecompatiblewiththepresentsetof Monitors. 3. Should Have Plated Connected Wires & Provision For Arm Strap 4. Should Have Auto Flushing Devi With Reservoir . 5. It Should Have Self Iling Test Port For Close Blood Sampling To Prevent Blood Loss And Infection. 6. It Should Be Certified. , Leukocyte Reducing Arterial Blood Filter For Extracorporeal Servi.: A. Should Have The Following Specification. B. Leukocyte Reducing 40Micron Surfa Modified Polyster Media To Remove Activated Neutrophils. C. 220 Ml Prime Volume And Flow Rate Of 6L/Min. D. Automatic Air Venting With Dedicated Air Vent E.Marked With 3/8 Inch Barbed Inlet And Outlet Ports And With Bypass Loop. , Bloodcardioplegia Filter With Leukocyte Reduction: A. Should Have The Following Specification. B. Leukocyte Reducing 40Micron Surfa Modified Polyster Media To Remove Activated Neutrophils C. 95Ml Prime Volume And Flow Rate Upto 350Ml/Min D.Marked With 1/4 Inch Connectors. , Pre-Bypassfilterforcbp Circuit: A. 0.2Micron Filter For Priming And Should Have The Following Specification. B. Recirculation Phase. C. Removes Particulate Debris And Microbial Contaminants From Extracorporeal Circuit. D.Markedwith3/8In.Inletand½in.Outlet Ports. E. 220Ml Prime Volume. , Arterial Line Filter For Paediatric Use: A. Should Have The Following Specification. B. 40Micron Lock Woven Polyster Screen. C. Prime Volume Less Then 30Ml With Upto 3L/Min Of Flow Rate. D. Port Design To Allow ¼ Inch. Tubing. , Leukocyteremovalfilterfor Red Blood Transfusion: 1. Should Have The Following Specification. 2. High Efficiency Leucocyte Removal Filter, Polyster Media, For One Unit Of Whole Blood Or Packed Ll. 3. Filter Hold Up Volume Of 20Ml After Recovery And Leucocyte Residual Averaging Less Than 2X 105/Unit. 4. Primes Directly With Red Lls And With Self Levelling Drip Chamber. 5. Marked. , Microaggregatefilter(B.T. Filter): A. Should Have The Following Specification. B. 40Micronfiltertoremovemicroaggregate, Debris And Clots From Stored Or Salvaged Blood. C. Hold Up Volume Of 20Ml. D. Gravity Prime. , Disposable Centrifugal Pump. Adult And Paediatric.: 1. Compatiblewith Sarns Centrifugal Pump. 2. Should Have Iso Certification. , Disposable Centrifugal Pump. Adult And Paediatric: 1. Compatible With Medtronic Centrifugal Pump Adult And Paediatric. 2. Should Have Iso Certification. , Disposable Flow Connector/Sensor For Centrifugal Pump: 1. For3/8”Tubingand¼”Tubingcompatibleto Medtronic Flow Probe. 2. Should Have Iso Certification. , Aortic Punch: 1. Size -3,3.5,4,4.5, 5 Mm 2. Should Have Iso Certification. , Cautryplate Withcordand Connector For Compatibility.: Patented Safety Ring Technology With Cord For Adult And Paediatric As Universal Size ,Disposable Grounding Plates For Electro Surgical Use, With Thin Conformable, Tear Resistant, Fluid Resistant, Occlusive, Polypropylene Backing, Coated With Thick And Soft Hydrophilic Conductive Adhesive Gel. Plate Design To Have Handling Tabs. , Neonatal Triple Lumen: Neonatal Tripple Lumen Radio Opaque Polyurathane Tripple Lumen Catheter 20, 23, 23G, Dilator 5 Fr, Introdur Needle 21G Kit For Injecting Orinfusingdifferentsolutionandmedications. Ntimetermarkingfrom5to12cmguidewire Should Be Nitinol (Kink-Resistant J Guide Wire.) Size- 4.5 Fr- Length-8Cm, 10Cm. Us / Rtified. , Four Lumen Catheter: Pur Four Lumen Intravenous Catheter Trey Presentation Should Contain Only 4 Lumen Catheter 8.5 Fr , 16, 20Cm Length With Lumen Size 16,14,18. 18G Introdur , 1Graduated J Guide Wire , 1 Dilator 1 Secondary Fixation Wing 3 Injection Caps And 1 Scalpel . , Femoralarterialcannula (Adult): Femoral Arterial Cannula (Adult) Seldinger Technique Polyethylene With Radio Opaque Line And Anti-Kink Collar And Wing Hub For Skin Fixation. Size- 1. 20G- Length 8Cm. One Transparent Catheter (Polyethylene), One Introdur Needle, Should One Straight Guide Wire With Flexible Tip. Size- 2. 18G- Length 10Cm. One Transparent Catheter (Polyethylene), One Introdur Needle, Should One Straight Guide Wire With Flexible Tip. Size- 3. 16G- Length 15 & 20Cm. One Polyurethane With 5 To 20 Cm Marking On Catheter, One Introdur Needle, J Guide Wire- Advanr. Us Approved , Femoralarterialcannula (Paed): Femoral Arterial Cannula (Paed) Polyurathane With Radio Opaque Line Introdud By Seldinger Technique With Integral Polyurathane Extension Tube Length 4.5Cm With Fixation Wing. Presented In A Peel-Pack. One Polyurathane Catheter, One Introdurneedle, One Straight Guide Wire With Flexible Tip, One 50 X 50 Cm Drape Sheet. Size- 22G- Length 4, 6, 8, 20Cm. Usapproved , Spirallacto(Polyethylene) Tubing: 1. Spirallycoiledtubing(Polyethylene)Fordrug Infusion. 2. Size- 100, 150, 200, 300 & 400Cm Us/ Rtified , Polyethylene Pressure Extension Tube: 1. Polyethylene High Pressure Extension Tube 2. Size- 11, 30, 50, 100, 150 & 200Cm. Us / Rtified , Anti-Microbial Impregnated Triple Lumen Catheter: 1. Impregnated With Anti-Microbial Agents With Nitinol Kink-Resistant J Guide Wire. A. Adult Size- 7.5 Fr- Length 16 & 20Cm B. Paedsize-4.5Fr-Length6&12.5Cmus Approved , Pur Iv Acss Devi: 1. Polyurathane Iv Acss Devi 2. Size- 16G, 18G, 20G & 22G , Dressing(Film): A. Ultraresistant Thick Drape Used In Under The Retractor, Ultra Absorbent Pad Keeps Surgical Site Dry, Containing Modified Llulose For Good Hemostatic Action, Bactericide Action With Total Incision Covering. Size : 50X50cm, 38.15.10, 38.30.15, 38.45.45, 38.45.60, 3591, 6X7cm Sizes Variable To ± 5Cm B. Absorbent Clear Acrylic Dressings - Transparent Wound Dressing Consisting Of A Clear, Conformable, Absorbent Pad With A Acrylic Polymer Pad Technology Enclosed Between An Outer Low Friction, Breathable, Waterproof, Viral & Bacterial Barrier Film . Perforated Wound Contact Layer Coated With Moist Skin Adhesive .Pad Size Should Be Slightly Short Then The Dressing Size Variable To ± 2Cm 1. Dressing Size: 6 Cm X 5 Cm, 2. Dressing Size: 9Cm X 6.5Cm, 3. Dressing Size: 7.5Cm X 9.5Cm, 4. Dressing Size: 11 Cm X 12.5Cm, 5. Dressing Size: 15Cm X 15Cm, 6. Dressing Size: 14.5Cm X 15.5Cm, 7. Dressing Size 8.5Cm X 10.7Cm, 8. Dressing Size: 20Cm X 10Cm, 9. Dressing Size: 17Cm X 19Cm , Surgical Brush And Povidone Iodine: With Sponge Impregnated 12% Povidone – Iodine In A 15Ml Solution Of Teepol, P.E.G. And Water Supplied With Nail Cleaner , Surgical Brush And Chlorohexidine: With Sponge Impregnated 20% Chlorohexidine – Iodine In A 15Ml Solution Of Iso Propyle- Alcohol And Water Supplied With Nail Cleaner. Us Approved , Polyurathane Long Cannula: Size- 16G, 18G, 20G, 22G & 24G Us Approved , Anti Uav Extension Line: 1. Anti Uav Extension Line For Light Sensitive Drugs 2. Size- 100, 150, 200Cm 3. Us Approved , Thermodilution Catheter 5 Lumen With Insertion Kit: 1. Catheter Should Have Five Lumen 2. Percutaneous Insertion Kit Separately With All Acssory 3. Iso Certification , Triple Lumen Cvp Kit Paed.: 1. Lumen Size- 18/20/18 G 2. Material Polyurathine, J Type Preferable Nitinol Guide Wire For Anti Kink. Needle Dilator . 5Ml Syringe Inside The Kit 3. It Should Be Approved Size-5.5 Fr. 8Cm , Etoandplasmasterilizer Indicator.: Nil , Chest Drainage Catheter: (Iso/): 1. Thoracic Drainage Catheter. 2. Extra Soft Catheter Is Gentle To The Body Tissues & Most Suitable For Thoracic Drainage. 3. Distalendisopenwithsupersmoothlarge Eyes To Maximize The Drainage From The Chest. 4. Proximal End Is Fitted With Specially Designed Tapered Tongue To Provide Exllent Forpsgrip And Non- Traumatic Insertion. 5. Catheters Are Marked At Every 2Cm From The Last Eye To Asrtain The Depth Of Plament. 6. Sterile, Double Packed In Peelable Pouch Pack. 7. Should Be /Iso Approved , Angled Chest Drainage Catheter: (Iso/): 1. Thoracic Drainage Catheter With Angle. 2. Extra Soft Catheter Is Gentle To The Body Tissues & Most Suitable For Thoracic Drainage. 3. Distalendisopenwithsupersmoothlarge Eyes To Maximize The Drainage From The Chest. 4. Proximal End Is Fitted With Specially Designed Tapered Tonguetoprovide Exllentforpsgrip And Non- Traumatic Insertion. 5. Catheters Are Marked At Every 2Cm From The Last Eye To Asrtain The Depth Of Plament. 6. Sterile, Double Packed In Peelable Pouch Pack. All Sizes 7.Should Be /Iso Approved , Under Water Seal Bottle (Chest Drainage Bottle). (Iso/): 1. Double Chamber Compact Unit Has2ltr Capacity Making It Suitable For All Cardiac And Thoracic Produres. 2. Easy To Read Graduation Help To Determine The Drainage Volume Precisely. 3. Clearly Marked Initial Level Ensures The Under Water Seal. 4. Separate Suction Port Is Providedfor Connection With Suction Unit. 5. Kink Resistant Large Bore Tubing Facilitates Unrestricted Flow. 6. Unit Is Provided With Metal Hangers And Floor Stand. , Snugger Set: Adult And Paediatric , Embolectomycatheter: Size 4,5,6 Fr Usa / Rtified , Tenckhoff Catheter Adult: For Peritoneal Dialysis Should Have Usa / Rtified Size Adult , Tenckhoff Catheter Pediatric: For Peritoneal Dialysis Should Have Usa / Rtified Size Pead , Tenckhoff Catheter Neonatal: For Peritoneal Dialysis Should Have Usa / Rtified Size Neonatal , Graft Embolectomycatheter: Size 4,5,6,7 Fr , Anti Microbial Incise Drape Size 34X35 Cm, 56X45 Cm: 1. Incise Drape Comprise Of Polyester, Thin, Breathable Low Memory Idophor, Impregnated Film. 2. Drape Should Be Coated With Pressure Sensitive Acrylate Adhesive , Antimicrobial Drape For Minimally Invasive Surgery Size 26X20 Cm: Polyester Film Idophor Coated With Hypo Allergic Adhesive Incise Drape Differentiated By A Frame Delivery System For One Person Application. , Reinford Disposable Gown: Made Non-Woven Fabric With 100% Polyester Cuffs, Latex Free, Sleeves And Set-In-Sleeves Seams Are Ultrasonic Welded, Double Layered With Reinforment Layer On Chest And Forehand Area, Fluid Repellant, Fire Resistant, Eto Sterilized,Packed With 2 Hand Towel. , Sterile Disp. Drape Kit For Open Heart Surgery: A. Cabg Pack - Sterile Wrap Size : 115Cm X 115Cm, Back Table Cover, Reinford 152Cm X 230Cm-1Pc, Tape Strips 10Cm X 55Cm -2Pcs, Suture Bags-2Pcs, Back Table Cover, Reinford 140Cm X 190Cm- 1Pc, Utility Drape With Tape 75Cm X 75Cm-1Pc, Perineal Drape 188Cm X 242Cm With Split 45Cm X 95Cm & Positioning Tape &Control Plus Fabric Reinforment- 1Pc, Cv Split Drape 320Cm X 224Cm X 295Cm With Positioning Tape & Control Plus Fabric Reinforment -1Pc. Bar Drape 193Cm X 239Cm With Positioning Tape & Tube Holders & Control Plus Fabricreinforment- 1Pc. Size Variable To ± 2Cm. It Should Have / Rtified. B. Valve Replament Drape - Drape With Size 264Cm X 364Cm X 194Cm, Size Variable To ± 2Cm With Pouches Control Plus Fabric Reinforment, Tube Holders With One Utility Drape Sheet. It Should Have Iso Certification C. Cardiac Produre Drape With Adhesive Incise Area On Chest & Legs - One Drapewith Armboard Covers 108 Inch. X 80 Inch. X 126 Inch, 12 Inch. X 15 Inch. Chest Adhesive Incise Area, 22 Inch. X 38 Inch. Leg Adhesive Incise Area, Heavy Duty Fabric, Control Plus Fabric Reinforment, Longitudinal Flaps, Tube Holders. It Should Have / Approved , Act Tubes: Compatible With Actalyte Act Machine , Act Cartridge: Compatible Withmedtronic Act Machine , Vascular Graft Eptee: Size 3, 3.5, 4, 4.5 ,5 ,6, 8 Mm X 10Cm Size 6,7,8Mm X 30,40,50,60,70,80,90Cm Should Have/ Rtified , Vascular Graft Eptee With Thin Wall: Size 3, 3.5, 4, 4.5 ,5 ,6, 8 Mm X 10Cm Size 6,7,8Mm X 30,40,50,60,70,80,90Cm Should Have/ Rtified , Vascular Graft Eptee With Thin Wall And Carbon Coated: Size 3, 3.5, 4, 4.5 ,5 ,6, 8 Mm X 10Cm Should Have/ Rtified , Vascular Graft Eptfe: Size 16,18,19,20,22 Mm X 20,30,40 Cm Length Should Have/ Rtified , Dacron Swage Graft: Size 7Mm An8 Mm Length 10Cm Or More , Soft Cloth Reinforment Dressing: A. Central Venous Catheter Dressing With Effective Antimicrobial Action. Polyurethane Film With Reinforment Of Soft Cloth 8.5Cm X 11.5Cm & Size: 7 Cm X 8.5Cm . Single, Sterile, Transparent, Semi-Permeable, Water And Bacteria Proof, Thin Conformable Polyurethane Film With One Half Laminated With Soft Cloth Breathable Backing For Enhand Grip On Challenging And Cvc Applications. Has A Long Slit To Conform Around The Civ And & Micro- Porous Label. Has Two Extra Secural Tape For Added Strength & Better Securement. With Unique Paper Window Frame Delivery Design. B. Iv Kit With Transparentdressingfor Peripheral Inserted Catheters : Single Pack Single, Sterile, Transparent, Semi-Permeable, Water And Bacteria Proof, Thin Conformable Polyurethane Film With One Half Laminated With Soft Cloth Breathable Backing For Enhand Grip On Challenging And Cvc Applications. Has A Long Slit To Conform Around The Piv And & Micro-Porous Label. Has Two Extra Secural Tape For Added Strength & Better Securement. With Unique Paper Window Frame Delivery Design Wipe Impregnated With 2% Chlorhexidine Gluconate And 70% Isopropyl Achohol, Synthetic Polyisoprene Based Textured Surfa Material Oftourniquet (Latexfree) Sterile Gauze Pie. , Transparentdressingforpost Opp.: Single Sterile Non-Adherent Absorbent Pad (Compressed Rayon Fiber) Bonded To A Larger Soft Cloth Macro-Porous, Stretchable, Rounded Corners Backing, Coated With A Border Of Hypoallergenic, Water-Resistant Pressure Sensitive Hypo-Allergic Adhesive. 6X8cm, 9X15cm, 9X20cm, 9X25cm, 9X30cm Size Variable To ± 2Cm. , Transparent / Soft Cloth Dress. With Abs. Pad: Single, Sterile,Transparent,Semi-Permeable, Water And Bacteria Proof, Thin Conformable, Polyurethane Film Coated With Water Repellant Acrylate Hypoallergenic Adhesive With Paper Window Frame Delivery And Having A Non Adherent Absorbent Pad (Compressed Rayon Fiber) For Very Good Absorbent And Strike Through Effect. 5X7cm, 8X10cm,9X15cm, 9X25cm, 9X35cm Size Variable To ± 2Cm. , On Line Cardiac Output Monitoring Transdur & Kit: Compatible With Edward Monitor. , Eptfe Cardiovascular Patch: Thickness – 0.6 Mm/0.4 Mm Size-Inches 50 X 75 Mm , Eptfe Cardiovascular Membrane: Thickness – 0.1 Mm Size-Inches 50 X 75 Mm , Eptfe Felt Soft & Hard: Sizes-5 X 7.5Cm & 4” X 4” , Dacron Cardiovascular Patch.: 4 X 4 “ , Dacron Cardiovascular Patch.: 2 X 2 Inches , Closed Circuit Suction Set: Nil , Multi Vessel Perfusion Adaptor: Should Have Four Arm With Pinch Clamp , Disposable Tubing Organizer.: Should Have Port For Multi Sized Perfusion Tubing. E.G. 3/16, ¼, 3/8,1/2,Inch Tubing. , Double Lumen Endobronchial Tube: All Sizes Both Side (Rt. & Lt) Usa / Rtified. Should Have With Endobronchial Blocker , Bifurcated Rapid Priming Set: Should Have 1/4” Bifurcated With “Y” Connector Should Have Spike In Both Ends , Pressure Dome P 20 Red: Should Have Sterile With Male Luer Lock. , Linear Cutter 75Mm Tlc 75 (Ref): Should Have Sterile. , Linear Stapler: Should Have Sterile. , Blade Sternalsaw: Compatible For Sarns Sterna Saw , Monopolar Hand Cautery Pencil (Disposable): It Should Have Universal Three Pin Connector For All Kinds Of Major Cautery Machines. , Tip Cleaner (Disposable) For Monopolar Hand Cautery Pencil: Tipcleanershouldbeintheseparatesterile Packing. , Monopolar Hand Cautery Pencil (Disposable) Cautery With Pencil Tip Cleaner (Disposable): It Should Be Sterile And Supplied In Sterile Packing With Cautery Pencil Tip Cleaner. , Cautery Switch With Polyurethane Coated Surgical Tip: Button Switch Pencil With Polytetrafluoroethylene Coated Electrosurgical Tip. , Cautery Tip: Polytetrafluoroethylene Coated Electrosurgical Ball Tip, Size – 5 Cm , Male To Male Connector: It Should Have Male Luer Lock In Both Ends. It Should Have Iso Certification , Vial Adapter: For Withdrawal Of Sterile Solution From Sterile Vial To Maintain Sterility It Should Have Iso Certification , Eye Shield Fog Free Mask With Visor: 1. It Should Be Consisted Fog-Free Multilayer With Visor. 2. It Should Be Made Of Pleat-Styple With Ties. 3. It Should Have High Fuild Resistan Capability. 4. It Should Have Particular Filtration Efficiency More Than 99%. 5. It Should Have Baterial Filtration Efficiency More Than 99%. 6. It Should Have Iso Certification. , Fluid Shield Fog Free Mask: 1. It Should Be Consisted Fog-Free Multilayer. 2. It Should Be Made Of Pleat-Styple With Ties. 3. It Should Have High Fuild Resistan Capability. 4. It Should Have Particular Filtration Efficiency More Than 99%. 5. It Should Have Baterial Filtration Efficiency More Than 99%. 6. It Should Have Iso Certification. , Microbial Sealant: 1. It Should Have Antibacterial Properties. 2. It Should Be Made Of Cyanoacrylate Technology. 3. Itshouldbecapabletosealand Immobilizes Dangerous Pathogens/Mrsa. 4. Itshouldbeeasy-To-Useapplicator, Polymerized In Less Time. Size:(A) Approximatecoverage:25Cmx 25Cm, (B) Approximate Coverage: 25Cm X 50Cm 5. It Should Have Iso Certification. , Long Cardiopleagia Cannula (Forminimal Invasive Surgical Produres): 1. It Should Have A Length Of More Than 30Cm With Luer Connection. 2. It Should Be Supplied With A Stainless Steel Introdur Needle. 3. It Should Be In Following Sizes 12 Ga/9Fr. 12Ga/9Fr. 4. It Should Have Iso Certification , Disposable Soft Tissue Retractor(Protector) For Minimal Invasive Cardiac Surgery: 1. It Should Be Mode Of Latex Free Silicone Rubber 2. It Should Have High Flexibility For Easy Insert In Situ. 3. It Should Be Capable For Self Holding, For Incision From 7 To 12Cm. 4. It Should Have Iso Certification. , Disposable Coronary Arteriotomy Knife: 1. It Should Be Sterile With, In Builthandle. 2. It Should Have Straight Sharp Pointed Tip For Arteriotomy. 3. Tip Size Should Not Be More Than 1Mm. 4. Shouldbeabletomakeaclearincised Arteriotomy Of Arteries <1Mm In Size. 5. Should Have / Approved. , Disposable Vascular Clamp Inserts: Forbetter Grip And Minimizing Trauma , Suture Organiser Disposable For Valve Surgery: 1. Shouldbe Ableto Stabilizesuturesforvalve Surgery. 2. Should Not Damage The Sutures. 3. Suture Should Not Get Entangled. 4. Capable Of Holding 10-20 Sutures 5. Should Have Sticking In The Bottom So It Adheres To Drapes , Compression Adhesive Bandage For Leg/Arms: 1. It Should Have Medical Grade Bio- Compatible, Pressure Sensitive And Trauma Free Adhesive. 2. It Should Be Breathable Latex Free. 3. It Should Have Maximum Pressure Compression For Legs Or Arms Of Harvested Veins And Arteries For Coronary Grafting. Sizes Variable To ± 1 Meter Long A. 10 Cm X 4,5,6 Meter Long. B.05 Cm X 4,5,6 Meter Long , Silver Mesh Dressing: 1.It Should Have Antimicrobial Cotton, Non Woven Gauze. 2.It Should Have Soft Comfortable Impregnated With Silver Sulphate. 3.It Should Have Various Sizes And Sizes Variable To± 02 Cm. Sizes Variable To ± 1 Meter Long A. 10 Cm X 10Cm B.05 Cm X 05 Cm C. 10Cmx 20Cm D 20Cm X 20 Cm , Vsd Ring: Cloth Bases , Sterile, 2 Circular Cloth With Ntral Hole , The Lower Cloth Should Be Bigger Than The Upper One, 2 Cloths Stitched At 12,3,6 And 9O Clock Positions , Part-02 , Intra Aortic Balloon Catheter.: 1. Should Have Membrane For Improved Abrasion Resistan. 2. Should Have A Small Profile Of7 Fr To 7.5 Fr. 3. Should Be Available In Volume Of 34Cc, 40Cc & 50Cc. 4. Balloon Diameter At 2Psi Should Be 15Mm. 5. Insertable Length Should Not Exed 725Mm. 6. Insertion Kit Should Be Provided Separately. 7. It Should Have Isoapproved. Sizes 34, 40 , 50 Cc Catheter Compatible With Datascope Iabp , Annuloplastyring,Rigidfor Mitral Valve: 1. Constructed Of Titanium Alloy With A Silicone Rubber Sewing Ring. 2. Closed Ring For Stable Remodelling. 3. Restores The Natural Size(3:4) & Shape In Systolic Position Ratio. 4. Marking Sutures For Accurate Plament. 5. Preferable Saddle Shaped. 6.Iso Approved. Sizes : Even No.24Mm To 34Mm. Oddno. 25Mm To35mm. , Annuloplasty Ring, Mitral Valve For Ischemic Mr: ?Rigid Ring For Durable Repair ? Complete Ring For Stable Remodelling ?Asymmetrical Designfor Asymmetrical Dilation P2-P3 Region ?Increased Sewing Ring Margin In P2-P3 Region. ?Dippedp3regiontoaccommodate Stress From Downward Lv Displament ?Iso Approved ? Sizes : Even No.24Mm To 34Mm. ?Odd No. 25Mm To35mm. , Annuloplastyring,Semi Flexible For Mitral Valve: Three Dimensional Design To Suit The Annulus Normal Of The Mitral Valve. Semi Flexible In Nature. Isoapproved. Sizes : Even No.24Mm To 34Mm. Oddno. 25Mm To35mm. , Annuloplasty Ring, Flexible For Mitral Valve: Barium Impregnated Silicone Strip With Polyester Fabric For X-Ray Visibility. Flexible Design To Allow Dynamic Motion . Isoapproved. Sizes : Even No.24Mm To 34Mm. Oddno. 25Mm To35mm. , Annuloplastyringsemirigid With Double Saddle Shape: 1. For The Use Of Mitral Valve Repair 2. It Should Be Semi Rigid Double Saddle Shaped Ring Design Specially For Mitral Position For Helping Stable Remodelling. 3. It Should Havespeciallycraftedsewingcuff Has Visible Ledge That Permits Plament Of Sutures. 4. Iso Approved. 5. Sizes : Even No.24Mm To 40Mm. , Annuloplastyrings3drigid For Tricuspid Valve: Annuloplasty Ring With Three Dimensional Shapes With Incomplete Ring Shape To Avoid The Sensitive Conduction System Anatomy And Downward Angle In Septal Region To Help Redu The Stress On Sutures And The Risk Of Ring Dehisn. Iso Approved Sizes : Even No.24Mm To 34Mm. Oddno. 25Mm To35mm , Annuloplasty Ring, Flexible For Tricuspid Valve: 1. Flexible Design To Allow Dynamic Annular Motion. 2. Open At Annuloseptal Commissure To Avoid Conduction System. 3.Iso Approved , Annuloplastyringsemi Flexible For Tricuspid Valve: 1.Semiflexibledesigntoallowdynamic Annular Motion. 2. Open At Annuloseptal Commissure To Avoid Conduction Syatem. 3.Iso Approved. , Prosthetic Heart Valve Bileaflet Mitral: 1. Bileaflet Pyrolytic Carbon Disc Valve 2. Radioopaque Disc To Be Visualized On X- Ray & Fluoroscopy And Disc Should Be Mri Compatible. 3. Should Be Of Lowprofile& Thromboresistan Characteristics. 4. Opening Angle Should Be 800-900 5. Wide Range Of Sizes For Mitral 23 To 35 Mm. 6. Easy Torque Rotation And Intraoperative Adjustment Should Be Possible. 7. Sewing Cuff Should Contain Suture Marker For Accurate Plament. 8. Valve To Be &Iso Approved. , Prosthetic Heart Valve Bileaflet Aortic & Mitral Valve.: 1. Bileaflet Pyrolytic Carbon Disc Valve 2. Radioopaque Disc To Be Visualized On X- Ray & Fluoroscopy And Disc Should Be Mri Compatible. 3. Should Be Of Low Profile & Thromboresistan Characteristics. 4. Opening Angle Should Be 800-900 5. Wide Range Of Sizes For Aortic 17 To 31 Mm. 6. Easytorquerotationandintraoperative Adjustment Should Be Possible. 7. Sewing Cuff Should Contain Suture Marker For Accurate Plament. 8. Valve To Be &Iso Approved. , Prostheticheartvalvemono Leaflet Mitral & Aortic: 1. It Should Superior Hemodynamic. 2. It Should Be Rotatable Within The Swing Ring. 3. It Should Have Rigid Tilting Disc Single Leaflet Heart Valve. 4. It Should Have In Various Sizes From 17Mm To 25 Mm For Aortic Position And Size 23Mm To 31Mm For Mitral Position. 5. Should Have Approval For Imported Valve. No / Approval Require For Indigenous Made Heart Valve. Indigenous Valve Doesn’T Require /Approval , Prostheticheart Valve Bileaflet Aortic With Conduit: 1. Bileaflet Pyrolytic Carbon Disc Valve 2. Radioopaque Disc To Be Visualized On X- Ray & Fluoroscopy And Disc Should Be Mri Compatible. 3. Should Be Of Low Profile & Thromboresistan Characteristics. 4. Opening Angle Should Be 800-900 5. Wide Range Of Sizes For Aoritc 19 To31 Mm. 6. Easytorquerotationandintra-Operative Adjustment Should Be Possible. 7. Sewing Cuff Should Contain Suture Marker For Accurate Plament. 8. Valve To Be & Approved. 9. Valveshouldbeattachedwithknittedlow Porosity Coated Graft. All Size.Should Have Iso Approved , Low Profile Prostheticheart Valve Bileaflet Aortic: 1. Bileaflet Pyrolytic Carbon Disc Valve 2. Radio-Opaque Disc To Be Visualized On X- Ray & Fluoroscopyanddiscshouldbemri Compatible. 3. Should Be Of Low Profile & Thromboresistan Characteristics. 4. Opening Angle Should Be 800-900 5. Easytorquerotationandintra-Operative Adjustment Should Be Possible. 6. Sewing Cuff Should Contain Suture Marker For Accurate Plament. 7. Valve To Be & Approved. 8. Sewingringshouldbethinnerandmore Pliable 9. Should Provide Extra Eoa Than Standard Valves 10. 17Mm To 23 Mm 11. Should Have Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral: Specification , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Stent–Less Porcine Tissue Aortic Valve): A. All The Sizes Should Be Available B. Should Be In Clinical Use With Long Term Good Results C. Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Stent-Less Pericardial Tissue Aortic Valve): A. All The Sizes Should Be Available B. Should Be In Clinical Use With Long Term Good Results C. Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Pericardial Stented Tissue Mitral Valve): A. All The Sizes Should Be Available B. Second Generation Valve With Xenologix Treatment C. Should Have Long Term Good Results Available In Literature And More Than 15 Years Durability In Vivo D. Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Pericardial Stented Tissue Mitral Valve): A. All The Sizes Should Be Available B. Low Profile Third Generation Valve With Thermafix Fixation C. Should Have Long Term Good Results Available In Literature D. Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Pericardial Stented Tissue Aortic Valve): A. All The Sizes Should Be Available B. Second Generation With Xenologix Treatment C. Should Have Long Term Good Results Available In Literature And More Than 15 Years Durability In Vivo D. Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Pericardial Stented Tissue Aortic Valve [Low Profile With Grater Eoa]): A. All The Sizes Should Be Available B. Low Profile Third Generation With Thermafix Treatment C. Should Have Long Term Good Results Available In Literature D. Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Pericardial Stented Tissue Aortic Valve With Pericardial Covered Stent): A. All The Sizes Should Be Available B. Third Generation Pericardial Stented Valve With Stunts Covered With Pericardium And Treated With Links Technology C. Should Have Good Long Term In Vitro Results Available In Literature. D. Us Andappoved E. Aortic Valve Delivered Larger Eoas, Exllent Hemodynamic With Single- Digit Pressure Gradients F. Elimination Of Tacking Suture At Loupe Of Commissure Redud Risk Of Tearing G. High Strength Titanium Stunts Andquick Click In Handle Attachment , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Porcinebioprostheticlow Profile Mitral And Aortic Valves): A. Second Generation With Anti Calcification Treatment By Linx Technology B. Low Pressure Fixation C. Results Studied In Acss Of More Than 20 Years D. Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Porcine Bioprosthetic Low Profile And Aortic Valves): A. Second Generation With Anti Calcification Treatment By Linx Technology B. Low Pressure Fixation C. Results Studied In Acss Of More Than 20 Years D. Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Porcinebioprostheticlow Profile Mitral And Aortic Valves): A. Third Generation With Amino- Olic Acid Anti Calcification Treatment With Covalent Bonding With Glutraldehyde . B. Physiologic Pressure Fixation C. Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Bovinejugularvein Pulmonary Valve Conduit): (All Sizes ) Isoapproved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Pulmonary Bioprosthesis Conduit): (All Sizes ) Isoapproved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Bovine Pericardium): Pericardium Patch Iso Approved , Bioprostheticheartvalve& Pericardium Aortic & Mitral (Bioprostheticaortic Valve (Suture Less)): Trated Valve To Redu Calcification. Shouls Have Self Expending And Elastic Alloy Stent. Should Have Covered With Film Of Carbofilm For Biocompatibility . Isoapproved , Heart Stabilizing System: 1. Tissue Stabilizing System With Malleable Pods For Better Grip And Anastomosis. 2. It Should Be Compatible With Various Cardiothoracic Retractors. 3. It Should Be Suction Based. 4. Should Be Trislot Design Of Pods For Better Visualization 5. Pods Should Have Low Profile Design For Easy Acss To Any Visibility Of Surgical Field With 1800 C Rotations. 6. It Should Have Iso Certification. , Heart Stabilizing System (Fortheuseofminimal Invasive Cardiac Produre).: 1. It Should Have Low Profile Pods. 2. It Should Have Iso Certification. 3. Suitalbe For Minimally Invasive Cardiac Surgery. , Heart Positioner (Cup Shaped) Archin Variety: 1. Should Be Suction Based. 2. It Should Be Based Low Profile Suction Cup 3. It Should Be Compatible With Various Vogue Cardiothoracic Retractors. 4. It Should Have Low Profile Arm Designed For Better Visualization. 5. It Should Have Iso Certification. , Heart Positioner Starfish Variety: 1. Should Be On Suction Based. 2. It Should Be Based Low Profile 3. It Should Be Compatible With Various Vogue Cardiothoracic Retractors. 4. It Should Have Low Profile Arm Designed For Better Visualization. 5. It Should Have Iso Certification. , Heart Positioner (Fortheuseofminimal Invasive Cardiac Produre).: 1. It Should Be Suction Based 2. It Should Have Low Profile Arm Designed For Better Visualization Micas. 3. It Should Have Iso Certification. , Vascular Graft For Aortic Arch Gelatin / Collagen Coated: 1. It Should Be Coatedwithgelatinor Collagen With Multiple Branches For Arch And Perfusion. 2. Graft Material Should Have Low Porosity Dacron (Fabric) 3. Should Be Provided With Various Sizes 4. It Should Have Iso Certification , Vascular Graft Y Type Gelatin / Collagen Coated: 1. Itshouldbecoatedwithgelatinor Collagen. 2. Graft Material Should Have Low Porosity Dacron (Fabric) 3. Should Be Provided In Sizes Of 16X8mm & 14X7mm. , Vascular Graft Straight Woven: 1. Itshouldbecoatedwithgelatinor Collagen. 2. Graft Material Should Have Low Porosity Dacron (Fabric). 3. Should Be Provided In Various Sizes And Lengths. , Axilo Femoral Ring Graftptfe: 1.Material Should Have Eptfe. 2.It Should Have Rings Forkink Resistan. 3Size-6,7,8Mmx20cm,To 90 Cm , Axilo Femoral Ring Graft Ptfe, Thin Wall.: 1. It Should Be In Various Sizes And Length. 2. Material Should Have Thin Wall Ptfe. 3. It Should Have Rings Forkink Resistan. , Axilo Femoral Ring Graft Ptfe,Thin Wall Coated With Carbon.: 1. It Should Be In Various Sizes And Length. 2. Material Should Have Thin Wall With Carbon Coated Ptfe. 3. It Should Have Rings Forkink Resistan. , Disposable Arrhythmia Ablation Kit: 1. Should Be Based On Radio Frequency 2. It Should Have Separate Pack For Monopolar Pen And Bipolar Devi 3. It Should Have/ Approved , Right Angled Venous Cannula: Singlestagecannulawith90degreeplastictub With Side Holes Size 12-28 Fr , E Ptfesuture Cv0,Cv (2-7) , Fibrin Glue: 2- Polyethylene Glycol Synthetic Sealent 2Ml , Asepto Syringe , Tmouth Piece With Tubing And Chamber: , La Line Central Catheter Size 7.5 Fr Length , Teflon Felt Size 2”*2” , E-Ptfecardiovascularpatch (10*5*0.6) , Double Pressure Transdur: 2 Disposable Pressure Transdur With 2 Flush Devis With Stop Cock With 48”+12” Pressure Tubings
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 12
Delhi View Result →
6.
Housing Urban and Rular Development #11053840 AOC
Tender For Annual Repair Special Repair /Mow Works In Various Rb/Nrb Under Section No.7, Jail Sub Division No.1, Bhopal- 1 Ar/Sr/Mow Works In Various Rb/Nrb Under Section No.7, Jail Sub Division No.1, Bhopal 1St Call P.A.C. 40.00 Lakh,As Per Building Sor Wef 01-01-2024 Schedule Attached Complition Period 180 Days Please Enable Macros To View Boq Information Ar/Sr/Mow Works In Various Rb/Nrb Under Section No.7, Jail Sub Division No.1, Bhopal Building Sor Wef 01.01.2024 Probable Amount Of Contract - Rs. 40.00 Lakh S.No Description Qty. Unit Rate Amount 2 2.1 All Kinds Of Soil. 100 Sqm 803.0 3 2.6 All Kinds Of Soil Cum. 147.0 4 2.7 2.7.1 Ordinary Rock Cum. 287.0 2.7.2 Hard Rock (Requiring Blasting) Cum. 519.0 2.7.3 Hard Rock (Blasting Prohibited) Cum. 828.0 5 2.25 2.25.1 All Kinds Of Soil. Cum 30.0 2.25.2 Ordinary Or Hard Rock. Cum 53.0 6 2.27 2.27.1 With Hard Muram Having Cbr >12 % At Under Floors Including Watering, Ramming And Compacting (Minimum Compaction 95% Of Mdd) In Layers Not Exceeding 20Cm In Thickness And Dressing Complete. (Note:- Maximum Thickness Of This Layer To Be Provided Shall Be 30Cm) Cum 393.0 2.27.2 Supplying And Filing In Plinth With Soil (Other Then Bc Soil ) Having Mdd Not Less Than 1.85 T/M3 Under Floors Including Watering, Ramming And Compacting (Minimum Compaction 95% Of Mdd) In Layers Not Exceeding 15Cm Depth And Dressing Complete. Cum 331.0 7 4.1 4.1.1 With 20Mm Nominal Size Graded Stone Aggregate. 4.1.1.1 M-25 – Grade Concrete Cum 6338.0 4.1.1.2 M-20 – Grade Concrete Cum 4933.0 4.1.1.3 M-15 – Grade Concrete Cum 4471.0 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 Sand : 6 Graded Stone Aggregate ) Cum 3890.0 4.1.2 With 40Mm Nominal Size Graded Stone Aggregate. 4.1.2.1 M-15 - Grade Concrete Cum 4403.0 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate) Cum 3808.0 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 Sand : 8 Graded Stone Aggregate Cum 3474.0 4.1.3 With Fly Ash. 4.1.3.1 1:2½:4:11 (1 Ordinary Portland Cement : 2½ Fly Ash : 4 Sand : 11 Graded Stone Aggregate 40 Mm Nominal Size) Cum 3459.0 4.1.3.2 1:2½:4:11 (1 Ordinary Portland Cement : 2½ Fly Ash : 4 Sand : 11 Graded Stone Aggregate 40 Mm Nominal Size) Cum 3150.0 Note: No Fly Ash Is To Be Added To Portland Pozzolona Cement In Any Case Which Itself Contains Fly Ash. 8 4.2 4.2.1 With 20Mm Nominal Size Graded Stone Aggregate 4.2.1.1 M-25 – Grade Concrete Cum 6582.0 4.2.1.2 M 20 – Grade Concrete Cum 5177.0 4.2.1.3 M 15 – Grade Concrete Cum 4714.0 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate Cum 4134.0 4.2.2 With 40Mm Nominal Size Graded Stone Aggregate 4.2.2.1 M-15 - Grade Concrete Cum 4647.0 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate Cum 4052.0 9 4.3 4.3.1 Upto Plinth: Foundations, Footings, Bases For Columns, Plinth Beams, Curtain Walls, Columns Below Plinth. Sqm 169.0 4.3.2 Above Plinth: Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Buttresses, And String Courses Fillets Etc. Sqm 267.0 4.3.3 Above Plinth: Columns, Pillars, Posts And Struts. Sqm 356.0 10 4.4 4.4.1 M-15 (With 20Mm Nominal Size Graded Stone Aggregate) Cum 4471.0 4.4.2 M-10 (With 20Mm Nominal Size Graded Stone Aggregate) Nominal Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate Cum 3890.0 11 4.6 4.6.1 M-25 (With 20Mm Nominal Size Graded Stone Aggregate) Cum 5095.0 4.6.2 M-20 (With 20Mm Nominal Size Graded Stone Aggregate) Cum 5558.0 4.6.3 M-15 (With 20Mm Nominal Size Graded Stone Aggregate) Cum 5095.0 4.6.4 M-10 (With 20Mm Nominal Size Graded Stone Aggregate) Nominal Mix -1 Cement: 3 Sand: 6 Graded Stone Aggregate. Cum 4515.0 12 4.7 4.7.1 M-15 (With 20Mm Nominal Size Graded Stone Aggregate) Cum 7057. 00 4.7.2 M-10 (M 10) (With 20Mm Nominal Size Graded Stone Aggregate) Nominal Mix -1 Cement : 3 Sand : 6 Graded Stone Aggregate Cum 6477.0 13 4.15 Note For Item No. 4.15:- The Quantity Will Be Calculated By Multiplying The Depth Measured From The Sub-Soil Water Level Upto Centre Of Gravity Of Concrete Under Sub-Soil Water Level With Quantity Of Concrete In Cum Executed Under Sub-Soil Water. The Depth Of Centre Of Gravity Shall Be Reckoned Correct To 0.1M. 0.05M Or More Shall Be Taken As 0.1M And Less Than 0.05M Ignored. Cum 109.0 14 5.1.1 5.1.2 M-15 Grade Concrete Cum 5397.0 5.2 Reinforced Cement Concrete Work (With 20 Mm Nominal Size Graded Stone Aggregate) In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Posts And Struts Etc. Above Plinth Level And Upto Floor Two Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement: 15 5.2.1 5.3 Reinforced Cement Concrete Work (With 20 Mm Nominal Size Graded Stone Aggregate) In Beams, Suspended Floors, Roofs Having Slope Of Any Degree Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Staircases Above Plinth Level And Upto Floor Two Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement In Concrete Grade. 16 5.3.1 5.4 Providing And Laying Upto Floor Two Level Reinforced Cement Concrete (With20 Mm Nominal Size Graded Stone Aggregate) In Kerbs, Steps And The Like Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With Concrete Grade. 5.4.1 M-20 Grade Concrete Cum 5542.0 17 5.9 5.9.1 Foundations, Footings, Bases Of Columns, Etc. For Concrete Upto Plinth Level Sqm 190.6 5.9.2 Walls (Any Thickness) In Cluding Attached Pilasters Butter Esses, Plinth Beams And String Courses Etc. 5.9.2.1 Uptoplinthlevel. Sqm 219.0 5.9.2.2 Above Plinth Upto 3.6 M Height From Plinth Level Sqm 330.0 5.9.2.3 Extra For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De-Shuttering And Decentering At All Levels, Over A Height Of 3.6 M, For Every Additional Height Of 1 Metre Or Part Thereof. Sqm 40.0 5.9.3 Suspended Floors, Roofs, Landings, Balconies And Access Platform. Sqm 439.6 5.9.4 Shelves(Cast In Situ) Sqm 290.0 5.9.5 Lintels, Beams, Girders, Bressumers And Cantilevers Sqm 356.0 5.9.6 Columns, Pillers , Piers, Abutments, Sqm 471.2 Posts And Struts. 5.9.7 Stairs, (Excluding Landings) Except Spiral- Staircases. Sqm 435.7 5.9.8 Spiral Staircases (Including Landing). Sqm 450.0 5.9.9 Arches, Domes,Vaults Upto 6M Span Sqm 1141.6 5.9.10 Extra For Arches, Domes, Vaults Exceeding 6 M Span Sqm 451.3 5.9.11 Chimneys And Shafts Sqm 294.0 5.9.12 Coffer/Waffle Slab Of Any Size Or Shape As Shown In The Drawing. Sqm 1481.0 5.9.13 Well Steining Sqm 264.0 5.9.14 Vertical And Horizontal Fins Individually Or Forming Box Louvers Band, Facias And Eaves Boards. Sqm 643.4 5.9.15 Extra For Shuttering In Circular Work Or Any Other Geometrical Shape (20% Of Respective Centering And Shuttering Items). Sqm 0.2 5.9.16 Small Lintels Not Exceeding 1.5M Clear Span, Mouldingas Incornices, Window, Sills, Courses, Bands, Copings, Bed Plates, Anchor Blocks And The Like. Sqm 191.0 5.9.17 Cornices And Mouldings Sqm 565.0 5.9.18 Small Surfaces Such As Cantilever Ends, Brackets And Ends Of Steps, Caps And Bases To Pilasters And Columns And The Like. Sqm 529.6 5.9.19 Weather Shade, Chajjas, Corbels Etc., Including Edges. Sqm 534.2 5.9.20 Suspended Floors, Roofs, Landings, Balconies And Access Platform. With Water Proof Ply 12 Mm Thick. (Item To Be Executed With Prior Permission Of S.E. In Case Of B & R Works And From Additional Project Director In Case Of Piu Works) Sqm 575.35 5.9.21 Lintels, Beams, Columns, Girders, Bressumers And Cantilevers With Waterproof Ply 12 Mm Thick (Item To Be Executed With Prior Permission Of S.E. In Case Of B&R Works And From Additional Project Director In Case Of Piu Works) Sqm 521.2 18 5.1 5.10.1 Suspended Floors, Roofs, Landing, Beams And Balconies (Plan Area To Be Measured). Sqm 212.0 19 5.12 5.12.1 50 Mm Thick Sqm 790.0 5.12.2 40 Mm Thick Sqm 689.0 5.12.3 25 Mm Thick Sqm 598.0 20 5.16 (Note:- (1). Spacer Bars (Chairs) Shall Be Paid Separately As Shown In The Drawing And As Per Direction Of Engineer In Charge. (2). No Extra Payment Shall Be Done For Overlaps And/Or Couplers. (3). Couplers Shall Be Conforming To Is Code On “Reinforcement Couplers For Mechanical Splices Of Bars For Concrete Reinforcement - Specification”) 5.16.1 Mild Steel And Medium Tensile Steel Bars. Kg 78.0 5.16.2 Hard Drawn Steel Wire Kg 75.0 5.16.3 Cold Twisted Bars (Ctd) Kg 81.0 5.16.4 Hot Rolled Deformed Bars Kg 81.0 5.16.5 Hard Drawn Steel Wire Fabric Kg 76.0 5.16.6 Thermo-Mechanically Treated Bars. (Tmt/Tmx) Fe 500 Or More Conforming To Is 1786 Kg 80.0 21 5.22 5. 22.1 12 Mm Thick Sqm 402.0 5. 22.2 25 Mm Thick Sqm 574.0 5. 22.3 50 Mm Thick Sqm 674.0 22 5.23 5. 23.1 Non-Asbestos Fibre Cement Board 6 Mm Thick As Per Is: 14862. 5. 23.1.1 150Mm Wide. Rm 102.0 5. 23.1.2 200Mm Wide. Rm 137.0 5. 23.1.3 250Mm Wide. Rm 153.0 5. 23.2 Aluminium Fluted Strips 3.15Mm Thick. Rm 483.0 5. 23.2.1 150 Mm Wide. Rm 646.0 5. 23.2.2 200 Mm Wide. Rm 725.0 5. 23.2.3 250 Mm Wide. 5. 23.3 Stainless Steel Grade 304 Plate-1.0 Mm Thick 5. 23.3.1 150 Mm Wide. Rm 367.0 5. 23.3.2 200 Mm Wide. Rm 443.0 5. 23.3.3 250 Mm Wide. Rm 555.0 23 5.25 Note- For Item No. 5.25:-The Quantity Will Be Calculated By Multiplying The Depth Measured From The Subsoil Water Level Up To The Centre Of Gravity Of The R.C.C. Under Ubsoil Water With The Quantity Of R.C.C. In Cubic Metre Executed Under Subsoil Water. The Depth Of Centre Of Gravity Shall Be Reckoned Correct To 0.1 M. 0.05 M Or More Shall Be Taken As 0.1 M And Less Than 0.05 M Ignored. No Extra Payment Shall Be Made For Placing Reinforcement Or Centering & Shuttering Under Sub – Soil Water Condition 24 5.33 5. 33.1. Frame 125 Mmx 60 Mm (Double Rebate) Rm 366.0 5. 33.2. Frame 100Mmx 60 Mm (Single Rebate) Rm 339.0 5. 33.3 Frame 85Mmx 60 Mm (Single Rebate) Rm 325.0 25 6.1 6.1.1 Cement Mortar 1:4 (1 Cement : 4 Sand) Cum 5818.0 6.1.2 Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 5626.0 26 6.2 6.2.1 Cement Mortar 1:4 (1 Cement : 4 Sand) Cum 6012.0 6.2.2 Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 5821.0 27 6.3 6.3.1 Cement Mortar 1:4 (1 Cement : 4 Sand) Cum 5252.0 6.3.2 Cement Mortar 1:6 (1 Cement:6 Sand). Cum 5061.0 28 6.4 6.4.1 Cement Mortar 1:4 (1 Cement : 4 Sand) Cum 5446.0 6.4.2 Cement Mortar 1:6 (1 Cement:6 Sand). Cum 5255.0 29 6.5 6.5.1 Cement Mortar 1:4 (1 Cement : 4 Sand) Cum 4347.0 6.5.2 Cement Mortar 1:6 (1 Cement: 6 Sand). Cum 4155.0 30 6.6 6.6.1 Cement Mortar 1:4 (1 Cement : 4 Sand) Cum 4541.0 6.6.2 Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 4350.0 31 6.7 6.7.1 Having 100 Kg / Cm2 Average Compressive Strength. 6.7.1.1 Cement Mortar 1:4 (1 Cement : 4 Sand) Cum 5384.0 6.7.1.2 Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 5162.0 6.7.2 Having 75 Kg / Cm2 Average Compressive Strength. 6.7.2.1 Cement Mortar 1:4 (1 Cement : 4 Sand) Cum 5271.0 6.7.2.2 Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 5049.0 6.7.3 Having 50 Kg / Cm2 Average Compressive Strength. 6.7.3.1 Cement Mortar 1:4 (1 Cement : 4 Sand) Cum 5158.0 6.7.3.2 Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 4936.0 32 6.11 Providing Half Brick Masonry With Well Burnt Chimney Bricks In Bull Patent Trench Kiln Manufactured By Ghol Process Crushing Strength Not Less Than 40 Kg /Cm2 And Water Absorption Not More Than 15% In Superstructure Above Plinth Level And Up To Floor Two Level. 6.12.1 Cement Mortar 1:3 (1 Cement : 3 Sand) Sqm 697.0 6.12.2 Cement Mortar 1:4 (1 Cement : 4 Sand) Sqm 673.0 33 6.13 6.13.1 Cement Mortar 1:3 (1 Cement : 3 Sand) Sqm 639.0 6.13.2 Cement Mortar 1:4 (1 Cement : 4 Sand) Sqm 615.0 34 6.14 6.14.1 Cement Mortar 1:3 (1 Cement : 3 Sand) Sqm 546.0 6.14.2 Cement Mortar 1:4 (1 Cement : 4 Sand) Sqm 522.0 35 6.15 6.15.1 Having 100 Kg/Cm2 Average Compressive Strength. 6.15.1.1 Cement Mortar 1 : 3 (1 Cement : 3 Sand) Sqm 570.0 6.15.1.2 Cement Mortar 1 : 4 (1 Cement : 4 Sand) Sqm 551.0 6.15.2 Having 75 Kg/Cm2 Average Compressive Strength. 6.15.2.1 Cement Mortar 1 : 3 (1 Cement : 3 Sand) Sqm 524.0 6.15.2.2 Cement Mortar 1 : 4 (1 Cement : 4 Sand) Sqm 505.0 6.15.3 Having 50 Kg/Cm2 Average Compressive Strength. 6.15.3.1 Cement Mortar 1 : 3 (1 Cement : 3 Sand) Sqm 479.0 6.15.3.2 Cement Mortar 1 : 4 (1 Cement : 4 Sand) Sqm 459.0 36 6.24 Note: - The Quantity Will Be Calculated By Multiplying The Depth Measured From Sub - Soil Water Level Up To The Centre Of Gravity Of Brick Work Under Sub - Water With The Quantity Of Brick Work In Cum Executed Under The Sub - Soil Water. The Depth Of Centre Of Gravity Shall Be Reckoned Correct To 0.1 M. 0.05 M Or More Shall Be Taken As 0.1 M And Less Than 0.05 M Ignored. 37 6.27 6.27.1 Aac Masonry In Polymer Modified Mortar Cum 5052.0 38 6.29 Of Minimum 80 Mmwidth And Depth Equal To Slab/Panel Thickness Running At Center Of Load Bearing Wall/ Beam/ Supports And On Other Support As Well To Achieve Diaphragm Action As Per Is 1893:2000. The Peripheral Bond Beam Shall Have Minimum 2 Bars Of 12 Mm Dia As Longitudinal Bars Which Shall Be Held Down By Hook Made In 12 Mm Dia Vertical Bars Coming Out From Structural Beam. However Concrete In Groove And Bond Beam Shall Not Be Paid Separately But Shall Be Measured With Aac Reinforced Slab. Precast Or Lintel And Chhajja Shall Be Jointed With Cm 1:6 Or 2 To 3 Mm Thick Polymer Modified Cement Mortar As Per Astmc 1660-09 To Aac Block Masonry. Structural Steel If Used For Providing Support To The Lintels (Such As Cleat Of Angle Iron, C-Section Anchored/Hold Fasted To Column) At Column End Towards (Where Door / Window Opening Is Adjacent To The Column) Shall Not Be Paid Separately. Rate Includes All Handling, Transportation, Hire Charges Of Machineries Scaffolding And Anti- Corrosive Protective Coating On Reinforcement Inside Aac Slab / Lintel/Chhajja Etc. Complete Up To Floor Two Levels. All Reinforcement Of Peripheral Bond Beam, Grooves And Inside Aac Slab, Lintel, And Chhajja Shall Be Paid @ Sor Rate (Including Tender Percentage) Separately. Quantity Of Reinforcement Steel Provided Inside Aac Slab, Lintel And Chhajja Shall Be Ascertained On The Basis Of Manufacturer’S Certificate And Also By Random Destructive Testing Done By Engineer-In-Charge Or His Representative For Which Cost Of Samples And Testing Charges Shall Be Borne By The Contractor. Deflection & Ultimate Load Test For Aac Reinforced Roof Slab And Lintel Shall Be As Per Annex. B Of Is: 6073 -2006 And Criteria For Conformity And Sampling Shall Be As Per Clause-13 Of Is: 6073 -2006. 39 7.1 7.1.1 Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 4147.0 40 7.2 7.2.1 Cement Mortar 1:6 (1Cement: 6 Sand). Cum 4351.0 41 7.4 7.4.1 Square Or Rectangular Pillars Cum 213.0 7.4.2 Circular Pillars. Cum 894.0 42 7.6 7.6.1 Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 4603.0 7.6.2 Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 4342.0 43 7.7 7.7.1 Masonry Work (First Sort) In Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 4803.0 7.7.2 Masonry Work (Second Sort) , In Cement Mortar 1:6 (1 Cement : 6 Sand) Cum 4541.0 44 7.9 7.9.1 Square Or Rectangular Pillars Cum 235.0 7.9.2 Circular Pillars. Cum 1003.0 7.9.3 Extra For Coursed Rubble Masonry With Hard Stone (First Or Second Sort) Curved On Plan For A Mean Radius Not Exceeding 6 M. Cum 384.0 45 7.26 7.26.1 Red Sand Stone: With Common Burnt Clay Bricks Of 25 Kg/Cm2 Compressive Strength. Sqm 1196.0 7.26.2 White Sand Stone With Common Burnt Clay Bricks Of 25 Kg/Cm2 Compressive Strength. Sqm 1196.0 46 7.27 7.27.1 Red Sand Stone Sqm 744.0 7.27.2 White Sand Stone Sqm 744.0 47 7.32 Note: - The Quantity Will Be Calculated By Multiplying The Depth Measured From Sub - Soil Water Level Up To The Centre Of Gravity Of Stone Work Under Sub - Water With The Quantity Of Stone Work In Cum Executed Under The Sub - Soil Water. The Depth Of Centre Of Gravity Shall Be Reckoned Correct To 0.1 M. 0.05 M Or More Shall Be Taken As 0.1 M And Less Than 0.05 M Ignored. 48 8.2 (A) Structural Analysis And Design And Preparation Of Shop Drawings For The Specified Design Loads Conforming To Is 875 Part Iii (The System Must Passed The Proof Test At 1.5 Times Design Wind Pressure Without Any Failure), Including Functional Design Of The Aluminum Sections For Fixing Glazing Panels Of Various Thicknesses, Aluminium Cleats, Sleeves And Splice Plates Etc. Gaskets, Screws, Toggles, Nuts, Bolts, Clamps Etc., Structural And Weather Silicone Sealants, Flashings, Fire Stop (Barrier)-Cum-Smoke Seals, Microwave Cured Epdm Gaskets For Water Tightness, Pressure Equalisation And Drainage And Protection Against Fire Hazard Including: (B) Fabricating And Supplying Serrated M.S. Hot Dip Galvanised / Aluminium Alloy Of 6005 T5 Brackets Of Required Sizes, Sections And Profiles Etc. To Accommodate 3 Dimentional Movement For Achieving Perfect Verticality And Fixing Structural Glazing System Rigidly To The Rcc/ Masonry/Structural Steel Framework Of Building Structure Using Stainless Steel Anchor Fasteners/ Bolts, Nylon Seperator To Prevent Bimetallic Contacts With Nuts And Washers Etc. Of Stainless Steel Grade 316, Of The Required Capacity And In Required Numbers. (C) Providing And Filling, Two Part Pump Filled, Structural Silicone Sealant And One Part Weather Silicone Sealant Compatible With The Structural Silicone Sealant Of Required Bite Size In A Clean And Controlled Factory / Work Shop Environment, Including Double Sided Spacer Tape, Setting Blocks And Backer Rod, All Of Approved Grade, Brand And Manufacture, As Per The Approved Sealant Design, Within And All Around The Perimeter For Holding Glass. (D) Providing And Fixing In Position Flashings Of Solid Aluminium Sheet 1 Mm Thick And Of Sizes, Shapes And Profiles, As Required As Per The Site Conditions, To Seal The Gap Between The Building Structure And All Its Interfaces With Curtain Glazing To Make It Watertight. (E) Making Provision For Drainage Of Moisture/ Water That Enters The Curtain Glazing System To Make It Watertight, By Incorporating Principles Of Pressure Equalization, Providing Suitable Gutter Profiles At Bottom (If Required), Making Necessary Holes Of Required Sizes And Of Required Numbers Etc. Complete. This Item Includes Cost Of All Inputs Of Designing, Labour For Fabricating And Installation Of Aluminium Grid, Installation Of Glazed Units, Tandp, Scaffolding And Other Incidental Charges Including Wastages Etc., Enabling Temporary Structures And Services, Cranes Or Cradles Etc. As Described Above And As Specified. The Item Includes The Cost Of Getting All The Structural And Functional Design Including Shop Drawings Checked By A Structural Designer, Dully Approved By Engineer-In-Charge. The Item Also Includes The Cost Of All Mock Ups At Site, Cost Of All Samples Of The Individual Components For Testing In An Approved Laboratory, Field Tests On The Assembled Working Structural Glazing As Specified, Cleaning And Protection Till The Handing Over Of The Building For Occupation. In The End, The Contractor Shall Provide A Water Tight Structural Glazing Having All The Performance Characteristics Etc. All Complete As Required, As Per The Architectural Drawings, As Per Item Description, As Specified, As Per The Approved Shop Drawings And As Directed By The Engineerin- Charge. Note: - 1. The Cost Of Providing Extruded Aluminium Frames, Shadow Boxes, Extruded Aluminium Section Capping For Fixing In The Grooves Of The Curtain Glazing And Vermin Proof Stainless Steel Wire Mesh Shall Be Paid For Separately Under Relevant Items Under This Sub- Head. However, For The Purpose Of Payment, Only The Actual Area Of Structural Glazing (Including Width Of Grooves) On The External Face Shall Be Measured In Sqm. Upto Two Decimal Places.Note: 2. The Following Performance Test Are To Be Conducted On Structural Glazing System If Area Of Structural Glazing Exceeds 2500 Sqm From The Certified Laboratories Accreditated By Nabl (National Accreditation Board For Testing And Calibration Laboratories), Department Of Science And Technologies, India. Cost Of Testing Is Inclusive In The Rates. Performance Testing Of Structural Glazing System Tests To Be Conducted In The Nabl Certified Laboratories(1) Performance Laboratory Test For Air Leakage Test (-50Pa To – 300Pa) And (+50Pa To +300Pa) As Per Astm E-283-04 Testing Method For A Range Of Testing Limit 1 To 200 Mvhr”(2) Static Water Penetration Test. (50Pa To 1500Pa) As Per Astme- 331-09 Testing Method For A Range Upto 2000 Ml.”(3) Dynamic Water Penetration (50Pa To 1500Pa) As Per Aama 501.01-05 Testing Method For A Range Upto 2000 Ml”(4) Structural Performance Deflection And Deformation By Static Air Pressure Test (1.5 Times Design Wind Pressure Without Any Failure) As Per Astme-330-10 Testing Method For A Range Upto 50 Mm”(5) Seismic Movement Test (Upto 30 Mm) As Per Aama 501.4-09 Testing Method For Qualitative Test” Tests To Be Conducted On Site (6) Onsite Test For Water Leakage For A Pressure Range 50 Kpa To 240 Kpa (35Psi) Upto 2000Ml” 49 8.3 (I) Coloured Tinted Float Glass 6Mm Thick Substrate With Reflective Soft Coating On Face # 2, + 12Mm Airgap + 6Mm Heat Strengthened Clear Glass Of Approved Make Having Properties As Visible Light Transmittance (Vlt) Of 25 To 35 %, Light Reflection Internal 10 To 15%, Light Reflection External 10 To 20 %, Shading Coefficient (0.25- 0.28) And U Value Of 3.0 To 3.3 W/M2 Degree K Etc. The Properties Of Performance Glass Shall Be Decided By Technical Sanctioning Authority As Per The Site Requirement. 50 8.5 The Insulation Layer Shall Have Facing (Factory Bonded On Surface # 1 Of The Fibre Glass Insulation Layer), Of Black Non- Woven Fibre Glass Tissue Of Nominal Thickness 0.5 Mm And Nominal Mass Not Less Than 60 Gm/Sqm, Made Of Randomly Oriented Glass Fibres Distributed In A Binder By A Wet-Lay Process Including Fixing 1.5 Mm Thick Solid Aluminum Sheet Backing Using, 6 Mm Thick Cement Board Including Ss Rivets, Nuts, Bolts,Washers Etc Complete. 51 8.6 %, Light Reflection Internal 10 To 15%, Light Reflection External 10 To 20 %, Shading Coefficient (0.25- 0.28) And U Value Of 3.0 To 3.3 W/M2 Degree K Etc. The Properties Of Performance Glass Shall Be Decided By Technical Sanctioning Authority As Per The Site Requirement. 52 8.7 A) Structural Analysis And Design And Preparation Of Shop Drawings For Pressure Equalisation Or Rain Screen Principle As Required, Proper Drainage Of Water To Make It Watertight Including Checking Of All The Structural And Functional Design. B) Providing, Fabricating And Supplying And Fixing Panels Of Aluminium Composite Panel Cladding In Pan Shape In Metalic Colour Of Approved Shades.The Aluminium Composite Panel Cladding Sheet Shall Be Coil Coated, With Kynar 500 Based Pvdf / Fluoropolymer Resin Coating Of Approved Colour And Shade On Face # 1 And Polymer (Service) Coating On Face # 2 As Specified Using Stainless Steel Screws, Nuts, Bolts, Washers, Cleats, Weather Silicone Sealant, Backer Rods Etc. C) The Fastening Brackets Of Aluminium Alloy 6005 T5 / Ms With Hot Dip Galvanised With Serrations And Serrated Washers To Arrest The Wind Load Movement, Fasteners, Ss 316 Pins And Anchor Bolts Of Approved Make In Ss 316, Nylon Separators To Prevent Bi-Metallic Contacts All Complete Required To Perform As Per Specification And Drawing The Item Includes Cost Of All Material And Labour Component, The Cost Of All Mock Ups At Site, Cost Of All Samples Of The Individual Components For Testing In An Approved Laboratory, Field Tests On The Assembled Working Curtain Wall With Aluminium Composite Panel Cladding, Cleaning And Protection Of The Curtain Wall With Aluminium Composite Panel Cladding Till The Handing Over Of The Building For Occupation. Base Frame Work For Acp Cladding Is Payable Under The Relevant Aluminium Items. The Contractor Shall Provide Curtain Wall With Aluminium Composite Panel Cladding, Having All The Performance Characteristics All Complete, As Per The Architectural Drawings, As Per Item Description, As Specified, As Per The Approved Shop Drawings And As Directed By The Engineer- In-Charge. However, For The Purpose Of Payment, Only The Actual Area On The External Face Of The Curtain Wall With Aluminum Composite Panel Cladding (Including Width Of Groove) Shall Be Measured In Sqm. Upto Two Decimal Places. 4 Mm Thick Alumminium Composite Pannel Material Consisting Of 3 Mm Thick Fr Grade Mineral Core Sandwiched Between Two Alumminium Sheets (Each 0.5Mm Thick) Sqm 3800.0 4 Mm Thick Alumminium Composite Pannel Material Consisting Of 3.5 Mm Thick Fr Grade Mineral Core Sandwiched Between Two Alumminium Sheets (Each 0.25Mm Thick) Sqm 3556.0 3 Mm Thick Alumminium Composite Pannel Material Consisting Of 2.5 Mm Thick Fr Grade Mineral Core Sandwiched Between Two Alumminium Sheets (Each 0.25Mm Thick) Sqm 3312.0 53 9.1 9.1.1 Second Class Teak Wood Cum 90618.0 9.1.2 Sal Wood Cum 71309.0 9.1.3 Kiln Head Wood Seasoned And Chemically Treated Hard Wood (Haldu, Kail, Bija Wood.) Cum 72744.0 9.1.4 Factory Made Kiln Seasoned, Chemically Treated, Finger Jointed At Spacing Not Closer Than 50 Cm, 2Nd Class Hard Wood 9.1.4.1 Frame Of Size 100Mmx60Mm Single Or Double Rebate Meter 389.0 9.1.4.2 Frame Of Size 120Mmx60Mm Double Rebate. Meter 457.0 54 9.3 9.3.1 Sal Wood Cum 76229.0 9.3.2 Kiln Seasoned And Chemically Treated Hardwood Haldu, Kail, Bija Wood. Cum 77538.0 9.3.3 Factory Made Kiln Seasoned, Chemically Treated, Finger Jointed At Spacing Not Closer Than 50 Cm, 2Nd Class Hard Wood. Cum 64833.0 55 9.5 9.5.1 Second Class Teak Wood 9.5.1.1 35 Mm Thick Shutters Sqm 2776.0 9.5.1.2 30 Mm Thick Shutters Sqm 2448.0 9.5.2 Kiln Seasoned And Chemically Treated Hardwood Haldu, Kail, Bija Wood. 9.5.2.1 35 Mm Thick Shutters Sqm 2205.0 9.5.2.2 30 Mm Thick Shutters Sqm 1956.0 9.5.3 Kiln Seasoned Selected Planks Of Sheesham Wood. 9.5.3.1 35 Mm Thick Shutters Sqm 2060.0 9.5.3.2 30 Mm Thick Shutters Sqm 1816.0 9.5.4 Factory Made Kiln Seasoned Chemically Treated And Finger Jointed At Spacing Not Closer Than 50Cm, 2Nd Class Hard Wood Shutters 9.5.4.1 35 Mm Thick Sqm 1089.0 9.5.4.2 30 Mm Thick Sqm 969.0 56 9.6 9.6.1 Second Class Teak Wood Sqm 2215.0 9.6.2 Kiln Seasoned And Chemically Treated Hardwood Haldu, Kail, Bija Wood. Sqm 1763.0 9.6.3 15Mm Thick Factory Made Kiln Seasoned, Chemically Treated And Finger Jointed At Spacing Not Closer Than 50Cm, 2Nd Class Hard Wood. Sqm 971.0 9.6.4 Ply Wood 5 Ply, 9 Mm Thick : 9.6.4.1 Decorative Plywood Both Side Decorative Veneer (Type - I) Conforming To Is 1328 Bwr Type. Sqm 1439.0 9.6.4.2 Decorative Plywood One Side Decorative Veneer And Commercial Veneer On Other Face (Type 1) Conforming To Is 1328 Bwr Type Sqm 1369.0 9.6.5 Ply Wood 7 Ply, 9 Mm Thick : 9.6.5.1 Decorative Plywood Both Side Decorative Veneer (Type - I) Conforming To Is 1328 Bwr Type. Sqm 1861.0 9.6.5.2 Decorative Plywood One Side Decorative Veneer And Commercial Veneer On Other Face (Type 1) Conforming To Is 1328 Bwr Type Sqm 1650.0 9.6.6 Particle Board 12 Mm Thick 9.6.6.1 Plain Particle Board Flat Pressed, 3 Layer Or Graded Wood Particle Board Medium Density Grade I, Is: 3087 Marked. Sqm 791.0 9.6.6.2 Veneered Flat Pressed Three Layer Or Graded Wood Particle Board With Commercial Veneering On Both Sides Conforming To Is: 3097, Grade I. Sqm 1087.0 9.6.6.3 Pre-Laminated Particle Board With Sqm 1333.0 Decorative Lamination On One Side And Balancing Lamination On Other Side, Grade I, Type Ii Is: 12823 Marked. 9.6.6.4 Pre-Laminated Particle Board With Decorative Lamination On Both Sides, Grade I, Type Ii, Is: 12823 Marked. Sqm 1390.0 9.6.6.5 Coir Veneer Board (Conforming To Is 14842) 12 Mm Thick Sqm 1298.0 9.6.7 Float Glass Panes 9.6.7.1 4 Mm Thick Glass Pane (Weight Not Less Than 10 Kg/Sqm) Sqm 973.0 9.6.7.2 5 Mm Thick Glass Pane (Weight Not Less Than 12.5 Kg/Sqm) Sqm 1046.0 9.6.8 Fly Proof Stainless Steel Grade 304 Wire Gauge With 0.5 Mm Dia. Wire And 1.4 Mm Wide Aperture With Matching Wood Beading Sqm 1532.0 9.6.8.1 4Mm To 5Mm Thick Integral Pvc Form Sheet With Celluka Finish Surface On Both Side With Density Not Less Than 600 Kg/Cum Sqm 580.0 9.6.8.2 4Mm To 5Mm Thick Laminated Pvc Form Sheet With Density Not Less Than 600 Kg/Cum, Laminated On Both Sides By 0.12 Mm Thick Laminated Sheet With Density Not Less Than 1400 Kg/Cum Sqm 754.0 57 9.7 9.7.1 12Mm Thick Plain Grade - 1, Medium Density Flat Pressed Three Layer Particle Board Fpt - I Or Graded Wood Particle Board Fpt - I Is : 3087 Marked Bonded With Bwp Type Synthetic Resin Adhesive As Per Is : 848 : Sqm 2717.0 9.7.2 12 Mm Thick Pre-Laminated Particle Board (Decorative Lamination On Both Sides) Grade - 1, Medium Density Flat Pressed, Three Layer Particle Board Fpt - I Or Graded Wood Particle Board Fpt - I, Conforming To Is : 3087 Bonded With Bwp Type Synthetic Resin Adhesive As Per Is : 848 And Pre- Lamination Conforming To Is : 12823 Grade 1, Type - Ii Marked: Sqm 2868.0 9.7.3 12 Mm Thick One Side Pre-Laminated Particle Board (Decorative Lamination On One Side And Other Sides Balancing Lamination) Grade - 1 Medium Density Flat Pressed, Three Layer Particle Board Fpt - I Or Graded Wood Particle Board Fpt-1 Conforming To Is : 3087 Bonded With Bwp Type Synthetic Resin Adhesive As Per Is : 848 And Prelamination Conforming To Is : 12823 Grade -1, Type Ii Marked: Sqm 2775.0 58 9.8 9.8.1 Second Class Teak Wood 9.8.1.1 35 Mm Thick Sqm 3408.0 9.8.1.2 30 Mm Thick Sqm 3033.0 9.8.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood 9.8.2.1 35 Mm Thick Sqm 2758.0 9.8.2.2 30 Mm Thick Sqm 2474.0 9.8.3 Kiln Seasoned Selected Planks Of Sheesham Wood. 9.8.3.1 35 Mm Thick Sqm 2594.0 9.8.3.2 30 Mm Thick Sqm 2331.0 9.8.4 Factory Made Kiln Seasoned Chemically Treated And Finger Jointed At Spacing Not Closer Than 50Cm, 2Nd Class Hard Wood Shutters 9. 8.4.1 30 Mm Thick Shutters Sqm 1469.0 9. 8.4.2 35 Mm Thick Shutters Sqm 1589.0 59 9.1 9.10.1 5 Mm Thick Instead Of 4 Mm Thick. Sqm 73.0 9.10.2 10 To 12 Mm Float Glass Sqm 132.0 9.10.3 5.5 Mm Safety Glass Sqm 400.0 9.10.4 10-12Mm Safety Glass Sqm 960.0 60 9.13 Deduct For Not Providing Hinges In Doors, Windows Or Clerestory Window Shutters With : 9.14.1 Stainless Steel Butt Hinges With Stainless Steel Screws For 2Nd Class Teak Wood And Other Class Of Wood Shutters. Sqm 170.0 9.14.2 Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size For 2Nd Class Teak Wood And Other Class Of Wood Shutters. Sqm 53.0 61 9.15 9.15.1 Panelled Or Panelled And Glazed Shutters : 9.15.1.1 Using Isi Marked Anodised Aluminium Butt Hinges With Necessary Screws. Sqm 2736.0 9.15.1.2 Using Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. Sqm 2753.0 9.15.2 Glazed Shutters : 9.15.2.1 Second Class Teak Wood Including Isi Marked Anodised Aluminium Butt Hinges With Necessary Screws. Sqm 2815.0 9.15.2. 2Nd Class Teak Wood Including Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. Sqm 2759.0 62 9.16 9.16.1 12 Mm Thick Sqm 555.0 9.16.2 18 Mm Thick Sqm 654.0 63 9.17 9.17.1 18 Mm Thick Sqm 1270.0 9.17.2 25 Mm Thick Sqm 1383.0 64 9.18 9.18.1 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. Sqm 2600.0 9.18.2 30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. Sqm 2370.0 9.18.3 25 Mm Thick (For Cupboard) Including Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges Is: 3818 Marked With Necessary Screws. Sqm 2119.0 65 9.19 9.19.1 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws. Sqm 1622.0 9.19.2 30 Mm Thick Including Isi Marked Sqm 1564.0 Stainless Steel Butt Hinges With Necessary Screws. 9.19.3 25Mm Thick (For Cupboard) Including Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. Sqm 1533.0 66 9.22 9.22.1 Rectangular Or Square. Sqm 157.0 9.22.2 Circular. Sqm 244.0 67 9.25 9.25.1 35 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. 9.25.1.1 Second Class Teak Wood. Sqm 3174.0 9.25.1.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. Sqm 2599.0 9.25.1.3 Kiln Seasoned Selected Class Of Sheesham Wood. Sqm 2452.0 9.25.2 35 Mm Thick Shutters With Isi Marked Stainless Steel Butt Hinges Of Required Size. 9.25.2.1 Second Class Teak Wood. Sqm 3291.0 9.25.2.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. Sqm 2716.0 9.25.2.3 Kiln Seasoned Selected Class Of Sheesham Wood. Sqm 2569.0 9.25.3 30 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. 9.25.3.1 Second Class Teak Wood. Sqm 2797.0 9.25.3.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. Sqm 2306.0 9.25.3.3 Kiln Seasoned Selected Class Of Sheesham Wood. Sqm 2179.0 9.25.4 30 Mm Thick Shutters With Isi Marked Stainless Steel Butt Hinges Of Required Size. 9.25.4.1 Second Class Teak Wood. Sqm 2914.0 9.25.4.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. Sqm 2423.0 9.25.4.3 Kiln Seasoned Selected Class Of Sheesham Wood. Sqm 2296.0 68 9.26 9.26.1 35 Mm Thick Shutters Sqm 2427.0 9.26.2 30 Mm Thick Shutters Sqm 2102.0 69 9.28 9.28.1 25 Mm Long Each 16.0 9.28.2 32 Mm Long Each 18.0 9.28.3 40 Mm Long Each 21.0 9.28.4 50 Mm Long Each 25.0 9.28.5 60 Mm Long Each 28.0 70 9.29 9.29.1 40 Mm Thick. Sqm 5407.0 9.29.2 25 Mm Thick. Sqm 3469.0 9.29.3 20 Mm Thick Sqm 2802.0 9.29.4 12 Mm Thick Sqm 1768.0 71 9.3 9.30.1 12 Mm Thick Sqm 1174.0 9.30.2 18 Mm Thick Sqm 1410.0 9.30.3 25 Mm Thick Sqm 1525.0 72 .9.32 73 9.34 9.34.1 18 Mm Thick Sqm 1626.0 9.34.2 25 Mm Thick Sqm 1741.0 74 9.35 9.35.1 2Nd Class Teak Wood 9.35.1.1 50X12 Mm Metre 102.0 9.35.1.2 50 X 20 Mm Metre 147.0 9.35.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. 9.35.2.1 50X12 Mm Metre 85.0 9.35.2.2 50X20 Mm Metre 119.0 75 9.39 9.39.1 Non Decorative Veneer On Both Sides. Metre 34.0 9.39.2 Particle Board With Decorative Veneering On Both Sides. Metre 102.0 76 9.41 9.41.1 12 Mm Dia. Metre 289.0 9.41.2 20 Mm Dia. Metre 377.0 9.41.3 25 Mm Dia. Metre 382.0 77 9.42 9.42.1 20 Mm Dia (Heavy Type) Metre 127.0 9.42.2 25 Mm Dia (Heavy Type) Metre 141.0 78 9.43 9.43.1 Fixed To Steel Windows By Welding. Kg 91.0 9.43.2 Fixed To Openings /Wooden Frames With Rawl Plugs Screws Etc. Kg 100.0 79 9.46 9.46.1 With 2Nd Class Teak Wood Beading 62X19 Mm. Sqm 1000.0 9.46.2 With 12 Mm Mild Steel U Beading. Sqm 681.0 80 9.5 9.50.1 125X65X2.12 Mm Each 30.0 9.50.2 100X58X1.90 Mm Each 23.0 9.50.3 75X47X1.70 Mm Each 18.0 9.50.4 50X37X1.50 Mm Each 10.0 81 9.51 9.51.1 125X90X4.00 Mm Each 53.0 9.51.2 100X75X3.50 Mm Each 35.0 9.51.3 75X60X3.10 Mm Each 21.0 9.51.4 50X40X2.50 Mm Each 13.0 82 9.52 9.52.1 125X65X2.12 Mm Each 32.0 9.52.2 100X58X1.90 Mm Each 23.0 9.52.3 75X47X1.70 Mm Each 17.0 9.52.4 50X37X1.50 Mm Each 10.0 83 9.53 9.53.1 150X125X27X2.80 Mm Each 58.0 9.53.2 125X125X27X2.80 Mm Each 55.0 9.53.3 100X125X27X2.80 Mm Each 46.0 9.53.4 75X100X20X2.24 Mm Each 39.0 84 9.54 9.54.1 150 Mm Each 169.0 9.54.2 125 Mm Each 163.0 9.54.3 100 Mm Each 131.0 85 9.55 9.55.1 150 Mm Each 174.0 9.55.2 125 Mm Each 163.0 9.55.3 100 Mm Each 137.0 86 9.56 9.56.1 Overall Width 35 Mm. Metre 133.0 9.56.2 Overall Width 50 Mm. Metre 138.0 9.56.3 Overall Width 65 Mm. Metre 141.0 87 9.57 9.57.1 300X16 Mm Each 170.0 9.57.2 250X16 Mm Each 157.0 88 9.58 9.58.1 250X10 Mm Each 68.0 9.58.2 200X10 Mm Each 60.0 9.58.3 150X10 Mm Each 42.0 9.58.4 100X10 Mm Each 35.0 89 0.6 9.60.1 300X20X6 Mm Each 72.0 9.60.2 250X20X6 Mm Each 67.0 90 9.61 9.61.1 125 Mm Each 27.0 9.61.2 100 Mm Each 25.0 9.61.3 75 Mm Each 24.0 91 9.62 9.62.1 150 Mm Each 23.0 9.62.2 115 Mm Each 20.0 9.62.3 90 Mm Each 17.0 92 9.63 9.63.1 300 Mm Weighing Not Less Than 200 Gms. Each 40.0 9.63.2 250 Mm Weighing Not Less Than 150 Gms. Each 34.0 9.63.3 200 Mm Weighing Not Less Than 120 Gms. Each 28.0 93 9.65 9.65.1 300X16 Mm Each 389.0 9.65.2 250X16 Mm Each 326.0 94 9.66 9.66.1 250X10 Mm Each 148.0 9.66.2 200X10 Mm Each 93.0 9.66.3 150X10 Mm Each 71.0 9.66.4 100X10 Mm Each 50.0 95 9.68 9.68.1 300X20X6 Mm Each 211.0 9.68.2 250X20X6 Mm Each 173.0 96 9.69 9.69.1 125 Mm Each 60.0 9.69.2 100 Mm Each 54.0 9.69.3 75 Mm Each 48.0 97 9.7 9.70.1 150 Mm Each 37.0 9.70.2 115 Mm Each 33.0 9.70.3 90 Mm Each 26.0 98 9.71 9.71.1 300 Mm Weighing Not Less Than 200 Gms. Each 79.0 9.71.2 250 Mm Weighing Not Less Than 150 Gms. Each 61.0 9.71.3 200 Mm Weighing Not Less Than 120 Gms. Each 49.0 99 9.73 9.73.1 125X64X1.90 Mm Each 67.0 9.73.2 100X58X1.90 Mm Each 59.0 9.73.3 75X47X1.80 Mm Each 39.0 9.73.4 50X37X1.50 Mm Each 25.0 100 9.74 9.74.1 125X64X2.50 Mm Each 76.0 9.74.2 100X60X2.50 Mm Each 60.0 9.74.3 75X50X2.50 Mm Each 46.0 101 9.77 9.77.1 125X85X5.5 Mm (Heavy Type) Each 456.0 9.77.2 125X70X4 Mm (Ordinary Type) Each 148.0 9.77.3 100X85X5.5 Mm (Heavy Type) Each 387.0 9.77.4 100X70X4 Mm (Ordinary Type) Each 117.0 9.77.5 75X65X4 Mm (Heavy Type) Each 145.0 9.77.6 75X40X2.5 Mm (Ordinary Type) Each 74.0 9.77.7 50X40X2.5 Mm (Ordinary Type) Each 32.0 102 9.78 9.78.1 150X125X27X5 Mm Each 385.0 9.78.2 125X125X27X5 Mm Each 345.0 9.78.3 100X125X27X5 Mm Each 304.0 9.78.4 75X100X20X3.2 Mm Each 239.0 103 9.79 9.79.1 400X10 Mm Each 400.0 9.79.2 250X10 Mm Each 329.0 9.79.3 200X10 Mm Each 261.0 9.79.4 150X10 Mm Each 221.0 9.79.5 100X10 Mm Each 142.0 104 9.8 9.80.1 300X16X5 Mm Each 237.0 9.80.2 250X16X5 Mm Each 225.0 105 9.81 9.81.1 125 Mm Each 205.0 9.81.2 100 Mm Each 181.0 9.81.3 75 Mm Each 141.0 106 9.82 9.82.1 300X16Mm Each 407.0 9.82.2 250X16Mm Each 374.0 107 9.87 9.87.1 40 Mm Each 144.0 9.87.2 50 Mm Each 150.0 9.87.3 65 Mm Each 162.0 9.87.4 75 Mm Each 185.0 108 9.39 9.91.1 300 Mm Weighing Not Less Than 330 Gms Each 184.0 9.91.2 250 Mm Weighing Not Less Than 280 Gms Each 147.0 9.91.3 200 Mm Weighing Not Less Than 240 Gms Each 136.0 109 9.92 9.92.1 150 Mm Each 115.0 9.92.2 115 Mm Each 94.0 9.92.3 90 Mm Each 80.0 110 9.99 9.99.1 Size 40 Mm Each 144.0 9.99.2 Size 50 Mm Each 156.0 9.99.3 Size 65 Mm Each 167.0 9.99.4 Size 75 Mm Each 196.0 111 9.101 9.101.1 300X16Mm Each 268.0 9.101.2 250X16Mm Each 245.0 112 9.102 9.102.1 400X10Mm Each 260.0 9.102.2 300X10Mm Each 198.0 9.102.3 250X10Mm Each 164.0 9.102.4 200X10 Mm Each 113.0 9.102.5 150X10 Mm Each 91.0 9.102.6 100X10 Mm Each 73.0 113 9.1 9.103.1 300X16X5Mm Each 255.0 9.103.2 250X16X5Mm Each 243.0 114 9.104 115 9.105 9.105.1 125 Mm Each 241.0 9.105.2 100 Mm Each 206.0 9.105.3 75 Mm Each 182.0 116 9.106 117 9.107 9.107.1 300 Mm Weighing Not Less Than 330 Gms Each 207.0 9.107.2 250 Mm Weighing Not Less Than 280 Gms Each 178.0 9.107.3 200 Mm Weighing Not Less Than 240 Gms Each 149.0 118 9.108 Note:- Aluminum Hinges Shall Not Be Used In Wooden Shutters. 9.108.1 125X75X4 Mm Each 115.0 9.108.2 125X63X4 Mm Each 108.0 9.108.3 100X75X4 Mm Each 95.0 9.108.4 100X63X4 Mm Each 93.0 9.108.5 100X63X3.2 Mm Each 90.0 9.108.6 75X63X4 Mm Each 77.0 9.108.7 75X63X3.2 Mm Each 75.0 9.108.8 75X45X3.2 Mm Each 67.0 119 9.109 9.109.1 300X16 Mm Each 241.0 9.109.2 250X16 Mm Each 195.0 120 9.11 9.110.1 400X10Mm Each 123.0 9.110.2 300X10 Mm Each 114.0 9.110.3 250X10 Mm Each 102.0 9.110.4 200X10 Mm Each 82.0 9.110.5 150X10 Mm Each 69.0 9.110.6 100X10 Mm Each 55.0 121 9.111 122 9.112 123 9.113 9.113.1 125 Mm Each 75.0 9.113.2 100 Mm Each 55.0 9.113.3 75 Mm Each 46.0 124 9.114 9.114.1 Single Rubber Stopper Each 35.0 9.114.2 Twin Rubber Stopper Each 86.0 125 9.115 126 9.116 127 9.117 128 9.118 9.118.1 125X34X24 Mm Weighing Not Less Than 23 Gms. Each 44.0 9.118.2 150X34X24 Mm Weighing Not Less Than 26 Gms. Each 48.0 129 9.119 9.119.1 75X60X10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms. Each 62.0 9.119.2 100X75X10 Mm Fitted With 5.5 Mm Dia Ms Bright Bar Rod Weighing Not Less Than 53 Gms. Each 82.0 130 9.12 9.120.1 152X42X18 Mm Weighing Not Less Than 60 Gms. Each 87.0 9.120.2 202X42X18 Mm Weighing Not Less Than 78 Gms. Each 106.0 131 9.121 132 9.122 133 9.123 9.123.1 35 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. 9.123.1.1 Second Class Teak Wood. Sqm 3583.0 9.123.1.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. Sqm 3008.0 9.123.1.3 Kiln Seasoned Selected Class Of Sheesham Wood. Sqm 2862.0 9.123.2 35 Mm Thick Shutters With Isi Marked Stainless Steel Butt Hinges Of Required Size. 9.123.2.1 Second Class Teak Wood. Sqm 3700.0 9.123.2.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. Sqm 3125.0 9.123.2.3 Kiln Seasoned Selected Class Of Sheesham Wood. Sqm 2979.0 9.123.3 30 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. 9.123.3.1 Second Class Teak Wood. Sqm 3206.0 9.123.3.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. Sqm 2715.0 9.123.3.3 Kiln Seasoned Selected Class Of Sheesham Wood. Sqm 2589.0 9.123.4 30 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. 9.123.4.1 Second Class Teak Wood. Sqm 3323.0 9.123.4.2 Kiln Seasoned And Chemically Treated Haldu, Kail, Bija Wood. Sqm 2832.0 9.123.4.3 Kiln Seasoned Selected Class Of Sheesham Wood. Sqm 2706.0 134 9.124 9.124.1 With 2Nd Class Teak Wood Beading 62X19 Mm. Sqm 1689.0 9.124.2 With 12 Mm Mild Steel U Beading. Sqm 1370.0 135 9.126 136 9.127 137 9.128 138 9.129 9.129.1 Triple Strip Vertical Type. Each 28.0 9.129.2 Double Strip (Horizontal Type). Each 23.0 139 9.131 9.131.1 300Mm Long Each Set 209.0 9.131.2 450Mm Long Each Set 256.0 9.131.3 500Mm Long Each Set 302.0 140 9.132 141 9.133 9.133.1 Marine Plywood Conforming To Is: 710 Sqm 1591.0 9.133.2 Fire Retardant Plywood Conforming To Is: 5509 Sqm 1660.0 142 9.134 9.134.1 1.5 Mm Thick. Sqm 851.0 9.134.2 1.0 Mm Thick. Sqm 691.0 143 9.135 144 9.136 9.136.1 With Decorative Veneering On One Side And Commercial Veneering On Other Side. Sqm 1433.0 9.136.2 With Non Decorative Veneering On Both Sides. Sqm 1322.0 145 9.137 146 9.138 9.138.1 12 Mm Thick. Sqm 919.0 9.138.2 18 Mm Thick. Sqm 1161.0 9.138.3 25 Mm Thick. Sqm 1230.0 147 9.139 148 9.14 9.140.1 18 Mm Thick Sqm 1493.0 9.140.2 25 Mm Thick Sqm 2017.0 149 9.143 25Mm To 40Mm Thick: Pre-Laminated With Decorative Lamination On Both Side Exterior Grade - I Mdf Board 12 Mm Thick Confirming To Is:14587 150 9.145 9.145.1 Board 12 Mm Thick Sqm 811.0 9.145.2 Board 18 Mm Thick Sqm 943.0 151 9.146 9.146.1 18 Mm Thick Sqm 1055.0 9.146.2 25 Mm Thick Sqm 1420.0 152 9.158 9.158.1 Extruded Section Profile Size 48X40 Mm. Metre 203.0 9.158.2 Extruded Section Profile Size 42X50 Mm. Metre 208.0 153 9.159 154 9.161 155 9.165 156 9.166 9.166.1 Plain Pvc Door Shutters. Sqm 2026.0 9.166.2 Pre Laminated Pvc Door Shutters. Sqm 2490.0 157 9.167 158 9.168 Non Decorative Finish. Sqm 2026.0 Decorative Finish (Both Side Wood Grained Finish). Sqm 2432.0 159 9.175 160 9.176 9.176.1 Non Decorative Finish (Matt Finish). Sqm 2037.0 9.176.2 Decorative Finish (Wood Grained Finish). Sqm 2142.0 161 9.177 162 9.182 163 9.183 164 9.184 165 9.185 166 9.186 167 9.187 9.187.1 Casement Window (Outward/Inward Opening) With Hinge System. 9.187.1.1 Frame (50 Mm X 50Mm) Metre 422.0 9.187.1.2 Sash (Style And Rail) (62 Mm X 34 Mm) Metre 403.0 9.187.1.3 Mullion (Intermediate Section) (66Mm X 50 Mm) Metre 434.0 9.187.1.4 ‘T Profile (One Vertical Length In Between Two Shutters) (24Mm X 34.5Mm) Metre 99.0 9.187.1.5 Glazing Bead (12Mm X 18Mm) Metre 130.0 9.187.2 Casement Window (With Friction Hinge And Outward Opening) 9.187.2.1 Casement Frame (67Mm X 62Mm) Metre 495.0 9.187.2.2 Casement Window Sash/Mullion (67Mm X75Mm) (Style, Rail And Intermediate Section) Metre 519.0 9.187.2.3 Casement Glazing Bead (35Mm X 18 Mm) Metre 178.0 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67Mm X 52Mm) Metre 9.187.3.2 Sliding Window Sash (60Mm X 44Mm) Metre 529.0 9.187.3.3 Sliding Interlock For Window (One Vertical Length In Each Shutter)(45.5 Mm X 28 Mm) Metre 139.0 9.187.3.4 Sliding Glazing Bead (35 Mm X 18 Mm) Metre 178.0 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67Mm X 52Mm) Metre 539.0 9.187.4.2 Sliding Door Sash (80Mm X 44Mm) Metre 653.0 9.187.4.3 Sliding Interlock For Door (One Vertical Length In Each Shutter) (45.5 Mm X 28 Mm) Metre 139.0 9.187.4.4 Sliding Glazing Bead (35 Mm X 18 Mm) Metre 178.0 168 9.188 9.188.1 200 X 19 X 1.9 Mm Each 321.0 9.188.2 250 X 19 X 1.9 Mm Each 369.0 9.188.3 300 X 19 X 1.9 Mm Each 462.0 9.188.4 350 X 19 X 1.9 Mm Each 526.0 9.188.5 400 X 19 X 1.9 Mm Each 636.0 169 9.189 170 9.191 171 9.192 172 9.193 173 9.194 Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Required Size And Of Approved Quality, All Complete As Per Approved Drawing & Direction Of Engineer-In-Charge. (Single / Double Glass Panes And Silicon Sealant Shall Be Paid Separately) Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5% Tolerancein Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 0.75 Sqm.) 9.193.1 Casement Window Single Panel With S.S. Friction Hinges (300 X 19 X 1.9 Mm), Made Of (Small Series) Frame 47 X 50 Mm & Sash 47 X 68 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glass Pane Glazing Bead Of Appropriate Dimension. (Area Of Window Upto 0.75 Sqm.) Sqm 6798.0 9.193.2 Casement Window Double Panels With S.S. Friction Hinges (300 X 19 X 1.9 Mm) Made Of (Small Series) Frame 47 X 50 Mm, Sash 47 X 68 Mm & Mullion 47 X 68 Mm All Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. (Area Of Window Above 0.75 Sqm Upto 1.50 Sqm). Sqm 6221.0 9.193.3 Casement Window Double Panels With Top Fixed With S.S. Friction Hinges (350 X 19 X 1.9 Mm) Made Of (Small Series) Frame 47 X 50 Mm, Sash 47 X 68 Mm & Mullion 47 X 68 Mm All Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. (Area Of Window Upto 2.50 Sqm). Sqm 4842.0 9.193.4 Casement Window Single Panel With S.S. Friction Hinges (400 X 19 X 1.9 Mm) Made Of (Big Series) Frame 67 X 60 Mm & Sash 67 X 80 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Sqm 6681.0 9.193.5 Casement Window Duble Panel With S.S. Friction Hinges (400 X 19 X 1.9 Mm) Made Of (Big Series) Frame 67 X 60 Mm & Sash 67 X 80 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 1.50 Sqm.) Sqm 6942.0 9.193.6 Casement Cum Fixed Panel Window Having Both And Single Casement Panel, Middle Fixed Panels And At Top Completely Fixed Ventilator With S.S. Friction Hinges (350 X 19 X 1.9 Mm) Made Of (Big Series) Frame 67 X 60 Mm & Sash 67 X 80 Mm & Mullion 67 X 80 All Having Wall Thickness Of 2.3 ±0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 3.00 Sqm. Upto 5.00 Sqm.) Sqm 5290.0 174 9.0 194.1 Fixed Window / Ventilator Made Of (Small Series) Frame 47 X 50 Mm & Mullion 47 X 68 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. (Area Upto 0.75 Sqm.) Sqm 4860.0 175 9.195 9.195.1 Casement Door With 3D Hinges Made Of (Big Series) Frame 67 X 64 Mm & Sash 67 X 110 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Door Upto 2.00 Sqm). 9.195.2 Casement Door With Top Hung Ventilator With 3D And S.S. Friction Hinges (400 X 19 X 1.9 Mm) Made Of (Big Series) Frame 67 X 64 Mm, Sash 67 X 110 Mm & Mullion 67 X 80 Mm All Having Wall Thickness Of 2.3 ±.0.2 Mm And Single Glazing Bead /Double Glazing Bead Of Appropriate Dimension. (Area Of Door Upto 2.50 Sqm). 176 9.196 Note: - For Upvc Frame, Sash And Mullion Extruede Profiles Minus 5% Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. 9.196.1 Two Track Two Panels Sliding Window Made Of Frame 52 X 44 Mm &Sash 32 X 60Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension. (Area Of Window Upto 1.75 Sqm) Sqm 5060.0 9.196.2 Three Track Three Panels Sliding Window With Fly Proof Ss Wire Mesh (Two Nos. Glazed & One No. Wire Mesh Panels) Made Of Frame 92 X 44 Mm & Sash 32 X 60 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension (Area Of Window Upto 1.75 Sqm). Sqm 6880.0 9.196.3 Two Track Two Panels Sliding Window Made Of Frame 67 X 50 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension (Area Of Window Above 1.75 Sqm Upto 2.50 Sqm). Sqm 5134.0 9.196.4 Three Track Three Panels Sliding Window With Fly Proof Ss Wire Mesh (Two Nos. Glazed & One No. Wire Mesh Panels) Made Of Frame 92 X 44 Mm & Sash 32 X 60 Mm Both Having Wall Thickness Of 1.9 ± 0.2 Mm And Single Glazing Bead Of Appropriate Dimension (Area Of Glazed & One No. Wire Mesh Panels) Made Of Frame 116 X 45 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead/Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 1.75 Sqm). Sqm 6371.0 9.196.5 Three Track Three Panels Sliding Window Made Of Frame 116 X 45 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 1.75 Sqm) Sqm 5913.0 177 9.197 Note: - For Upvc Frame, Sash And Mullion Extruede Profiles Minus 5% Tolerance In Dimension I.E. In Depth & Width Of Profile Shall Be Acceptable. Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. 9.197.1 Two Track Two Panels Sliding Window Made Of Frame 67 X 50 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 2.50 Sqm Upto 4.00 Sqm). Sqm 4332.0 9.197.2 Two Track Four Panels Sliding Window Made Of Frame 67 X 50 Mm & Sash 46 X 62 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Window Above 4.00 Sqm Upto 8.00 Sqm). Sqm 3532.0 178 9.198 9.198.1 Two Track Two Panels Sliding Door Made Of Frame 67 X 50 Mm & Sash 46 X 82 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Door Above 2.00 Sqm Upto 10.00 Sqm). Sqm 3676.0 9.198.2 Two Track Four Panels Sliding Door Made Of Frame 67 X 50 Mm & Sash 46 X 82 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Door Above 8.00 Sqm Upto10.00 Sqm). Sqm 3810.0 9.198.3 Three Track Three Panels Sliding Door Made Of Frame 116 X 45 Mm & Sash 46 X 82 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead/ Double Glazing Bead Of Appropriate Dimension. (Area Of Door Above 5.00 Sqm) Sqm 4361.0 9.198.4 Three Track Three Panels Sliding Door With Fly Proof S.S Wire Mesh (Two Nos. Glazed & One No. Wire Mesh Panels) Made Of Frame 116 X 45 Mm & Sash 46 X 82 Mm Both Having Wall Thickness Of 2.3 ± 0.2 Mm And Single Glazing Bead / Double Glazing Bead Of Appropriate Dimension. (Area Of Door Above 2.00 Sqm Upto 5.00 Sqm) Sqm 5617.0 179 9.199 180 9.2 9.200.1 24 To 25 Mm Thick Plain Solid Pvc Flush Door Shutter 9.200.2 28 To 30 Mm Thick Plain Solid Pvc Flush Door Shutter 181 9.201 9.201.1 1Mm Thick Laminated Sheet Sqm 3693.0 9.201.2 0.12 Mm Thick Laminated Sheet Sqm 3461.0 182 9.202 9.202.1 35Mm Thick Including 4 Nos. 100Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws. Sqm 3339.0 9.202.2 35Mm Thick Including 3 Nos. 100Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws. Sqm 3171.0 9.202.3 25Mm Thick (For Cupboard) Including 3 Nos. 75Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. Sqm 3005.0 183 9.203 9.203.1 35Mm Thick Including 4 Nos. 100Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary. Sqm 1953.0 9.203.2 30Mm Thick Including 3 Nos. 100Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws. Sqm 1772.0 25Mm Thick Including 3 Nos. 100Mm Long, Screws. Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws. Sqm 1532.0 184 9.204 185 9.213 9.213.1 35 Mm Thick Including 4 Nos. 100 Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws. Sqm 2775.0 9.213.2 30 Mm Thick Including 3 Nos. 100 Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws. Sqm 2675.0 9.213.3 25Mm Thick (For Cupboard) Including 3 Nos. 75 Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. Sqm 2575.0 186 9.214 9.214.1 35 Mm Thick Including 4 Nos. 100 Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws. Sqm 3650.0 9.214.2 30 Mm Thick Including 3 Nos. 100 Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws.Screws. Sqm 3550.0 9.214.3 25Mm Thick (For Cupboard) Including 3 Nos. 75 Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. Sqm 3450.0 187 9.215 9.215.1 35 Mm Thick Including 4 Nos. 100 Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws. Sqm 3121.0 9.215.2 30 Mm Thick Including 3 Nos. 100 Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Stainless Steel Butt Hinges With Necessary Screws. Sqm 3021.0 9.215.3 25Mm Thick (For Cupboard) Including 3 Nos. 75 Mm Long, Isi Marked Heavy Weight (2.5Mm Thick) Nickel Plated Bright Finished M.S. Piano Hinges With Necessary Screws. Sqm 2921.0
Contract Date: Jun 24, 2026 Contract Value : ₹ 20.40 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
7.
Educational and Research Institute #10908628 AOC
Notice Inviting E-Tender For Laboratory Setup For Vtcs Of Jhargram And Paschim Medinipur Districts Including Supply, Installation And Commissioning Of Tools/Equipment/Instruments Etc. For Implementation Of Vocational Education In West Bengal- 1 Hot air oven 2 Seed drill 3 Sealing machine 4 Soil Auger 5 BOD incubator 6 Sowing machine 7 Soil testing kit 8 Sprayer 9 Compound Microscope 10 Pressure cooker 11 Wheel hoe 12 EC meter 13 Measuring tape 14 Sleeve trier/Nobbe trier 15 Heater 16 Hose pipe 17 Spade 18 Hand leveller 19 Watering can 20 Moisture box 21 Sickle 22 Sickle 23 Grinding machine 24 Germinator 25 Four stroke petrol engine with CNG setup- working condition 26 Power tiller 27 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 28 Riffle type divider 29 Model Tractor 30 Processing / Oil extraction machine ( Soxhlet Apparatus) 31 Dibbler 32 Sprayer 33 General Balance 34 Soil testing kit 35 Foot Sprayer 36 Wheel hoe 37 Measuring tape 38 Pruning shear 39 Hose pipe 40 Heater 41 Forester’s shear 42 Hand fork 43 Spade 44 Hedge shear 45 Crow-bar 46 Grass shear 47 Hand leveler 48 Pruning saw 49 Axe 50 Hand cultivator 51 Drainage hoe 52 Pruning knife 53 Garden trowel 54 Watering can 55 Sickle 56 Digging fork 57 Garden hand rake 58 Kurpi-Varvari 59 Iron peg , Field board 60 Grinding machine ( turmeric powder and seed spices powder) 61 Aluminium oil extraction unit large ( for lemon grass & citronella) 62 Pouch sealing machine 63 Pilfer proof cap sealing machine 64 Hand refractometer 65 Weeder 66 Soil testing kit 67 Moisture meter 68 General Balance 69 Foot Sprayer 70 Salometer 71 Brix hydrometer 72 Electrically operated mixer cum grinder 73 Measuring tape 74 Knife Set 75 Heater 76 Hose pipe 77 Vegetable slicer, Potato slicer, Pineapple slicer 78 Spade 79 Hand leveler 80 Axe (Local made) 81 Pruning Secateur 82 Watering can 83 Fruit Tree Picking Pole with Basket 84 Sickle 85 Pulper 86 Cabinet dryer 87 Crusher 88 Autoclave (Laboratory type) 89 Spiral or screw type juice extractor. 90 Can sealer or double seamer 91 Water distillation unit 92 Wheelbarrow 93 Can vacuum testing gauge 94 Hand operated metal grinder 95 Washing machine 96 AC Motor Trainer Kit 97 Mixer cum grinder 98 Soldering & De-soldering Station 99 Megger 100 Geyser 101 ½ HP Induction motor Three Phase 102 Wooden Panel board with following accessories 103 Electric Power Drill 104 Clamp On Meter 105 Vacuum cleaner 106 Multimeter 107 ¼ HP Induction motor Single Phase 108 TPIC with Neutral main switch 109 Hand Drill Machine Electric with Hammer Action 110 Single phase Energy meter 111 Sodium vapour lamp 112 Mercury vapour lamp 113 Steam iron automatic 114 Electric rice cooker 115 DOL starter 116 Adjustable wrench 117 Screw driver set 118 M.C.B 119 Bench Vice 120 Wooden Board for wiring 121 Insulated Combination Plier (Heavy Duty ) 122 DPIC main switch 123 Spanner set 124 Cable cutting pliers 125 Analog multi-meter 126 DOL starter 127 Cutting pliers 128 Tools maker vice 129 Soldering iron 130 Crimping tool(pliers) 131 Ring Spanner 132 Screw driver set 133 Precision set of screwdrivers 134 M.C.B 135 Adjustable wrench 136 Hacksaw frame adjustable 137 De-soldering pump electrical heated, manual operators 138 Insulated combination pliers 139 Insulated side cutting pliers 140 Insulated screw driver 141 Insulated Combination Plier (Heavy Duty ) 142 Earthing rod with chain, Fish Wire 143 Electric bell 144 File flat second cut 145 Distribution box 4-way 146 File flat bastard 147 Handsaw 450mm 148 Soldering Iron Changeable bits 149 Ball Pin Hammer 150 Spirit level 151 3-pin 16A wall socket, flush type 152 Plier-Flat Nose 153 File flat smooth 154 3-pin 16A wall socket, mounting type 155 Ceiling rose 6A, 250V 2plate 156 Chisel-Cold-Flat 157 Fuse 158 Hammer ball pen 159 Fan regulator 160 3-pin 6A wall socket, flush type 161 Continuity tester 162 Hacksaw with frame adjustable 163 Wooden saw 164 Combined LED or fluorescent tube 165 Fuse 166 Standard wire gauge 167 I.C.T.P. switch16A 400V 168 S.P. switch 6A, 250 V mounting type two-way 169 S.P. switch flush type two way 170 3-pin 6A wall socket ,mounting type 171 2-pin 6A wall socket, flush type 172 I.C.D.P. switch16A250V 173 I.C. cut out 16A, 250V 174 Intermediate switch 6A, 250V 175 2-pin 6A mounting type 176 S.P. switch 6A, 250V mounting type single way 177 Kit-kat fuse 178 Kit-kat fuse 179 S.P. switch flush type, single way 180 3-pin16A 250V plug 181 Bell-Push/switch 6A, 250V mounting type 182 HRC Fuse-16A 183 PVC Cu wire 184 Terminal plate 16A 250 V3-way 185 Bell-Push / switch 6A, 250V flush type 186 GI junction box-1,2,3&4way square type 187 Bakelite pendent-holder 188 3-pin 6A 250V plug 189 Toggle switch 6A 190 Neutral link 16a mps 191 GI conduit pipe 192 PVC Channel 193 PVC pipe coupling 194 PVC junction box-1,2,3 and 4 way 195 PVC bend 196 PVC Elbow 197 PVC Tee 198 GI conduit coupler & Inspection Coupler 199 GI Elbow & Inspection Elbow 200 Tees & Inspection Tee 201 PVC Casing for wiring 202 PVC conduit pipe 203 Solar Photo-voltaic Cell : Solar power generation 204 Storage Battery 205 Complete set up of Single crystalline silicon PV Cell 206 Pyranometer 207 Solar street lighting 208 Solar home lighting system with all necessary components for student demonstration 209 Data logger 210 Concentrated solar collector 211 Flat type solar collector 212 Solar cooker 213 PVC / XLPE low tension cable jointing kit 214 D.C shunt Motor 215 Three phase Energy meter 216 Voltage Stabilizer 217 Room Heater 218 4-point starter 219 Tools makers vice 220 Tubular box spanner 221 Magneto spanner set 222 LED lamp 223 Allenkey set (Hexagonal set of 9) 224 Insulator model a) Pin type 225 Insulator model b) Strain type 226 Insulator model c) Disc type 227 Round Nose pliers 100mm 228 Round Nose pliers 2no. of set 229 Connecting screwdriver 100mm 230 Steel rule graduated both in Metric and English Unit 300mm 231 Long Nose pliers8 232 Micrometer 233 Steel measuring tape 3 meters 234 Hammer ball pen 500 grams 235 Neon tester 500V 236 PVC cable & XLPE cable 4 core, 3 & ½ core in m 237 Iron connector-5A, 250V 238 Digital compression testing machine 239 Theodolite transit latest model with all accessories 240 Aggregate impact tester with cylindrical cup and measuring cylinder 241 Auto level latest model with all accessories 242 Hand GPS-latest version 243 Mortar cube vibrator 244 Aggregate Crushing Value Apparatus 245 Concrete mixer 246 Dumpy level 247 Manual bar bending machine of suitable size 248 Bulk density apparatus (Cylindrical measure for fine aggregate and coarse aggregate ) 249 Turbidity Test Kit 250 Power cutter of suitable size 251 Box sextant 252 Planimeter Digital 253 Plane table with stand, accessories & water proofing Cover 254 Weighing plateform digital 255 Vicat apparatus with plunger, needles and mould 256 Standard IS sand 257 Oven Small Size 258 Electronic balance 259 Tile cutter 260 Bar bending table 261 Drill and bit set 262 Ratchet rack : with post and clamp flat 5 drill 6 to 35 mm by 0.2 mm. 263 Mortar board : 2000x2000 264 Metal cross staff- box type 265 Telescopic alidade 266 Slump test apparatus with temping rod 267 Water testing kit – for ph value 268 Thickness and length gauges (Elongation and Flakiness Index) 269 Plumbers metal melting pot 270 Metal cross staff- open type 271 Ratchet pipe die : 15 mm to 32 mm 272 Tap and die set to cut BSP Thread 273 Height indicators 274 Metric chain : 30 m & 20 m 275 Prismatic compass with stand and all accessories 276 Chain pipe wrenches : 90 mm-650 mm 277 Engineers chain 278 Sieve for sand in adjustable stand : 1mm, 100cm x 60cm fixed in steel frame 279 Optical square 280 Mortar board : 2 mtx2 mt. 281 Slump Cone 282 IS Brass sieves - set 283 Stillson pattern pipe wrenches : 450 mm to take pipe up to 52 mm dia. 284 Pipe vice to grip pipes up to : 77mm 285 Drawing Board : 1000mmx700mm 286 Brushes for painting 287 Leveling st-4M 288 Ranging rod Steel-2M 289 Offset rod : 2M 290 Measuring cylinder : set of 100 ml., 500 m., 1000 ml. 291 Pick axe 292 Pyconometer for specific gravity 293 Pickaxe. 294 Le Chatelier Mould (for soundness test of cement) 295 Survey plotting scale : 8 scales with offset scale in box 296 Mason square : 30x60 cm 297 Tenon saw, dovetail saw 298 Le Chateliers flask (For specific gravity test of cement) 299 Monkey Plier (gas pliers) 300 Aluminum float 301 Tool caulking 302 Flat Smithy tong. 303 Saw plumber : 300mm 304 Stop watch Digital 305 Screw driver Set 306 Land measuring steel tape 30 Meter long 307 Brick hammer with handle 308 Crow bar : 30mm dia. 1.5 m long of mild steel 309 Cube mould : 150mm Size 310 Spanner monkey up to 50 mm 311 Stilson wrench : 200 & 350 mm 312 Land measuring plastic tape : 30 mt long 313 Shovel 314 Spade 315 Telescopic pipes / props 316 Mason plumb rule with spirit Level 317 Trowel : 25 cmx10cm 318 Plumb rule and Bob 319 Non porous plate 320 Graduated cylinder 321 Adjustable spanner : A375 322 Double face hammers 323 Hacksaw frame adjustable : 250 to 300 mm 324 Level spirit wooden : 300mm 325 M.S pan : 45CM Dia. 326 Bucket G.i. : 35 CM Dia. 327 Sprit level : 30cm long 328 Bolster 329 Bevel 330 Wooden mallet 331 Gauging trowel 332 Sampling scoops : 2kg and 5 kg 333 Plumbers ladle 334 Trowel 125 335 Farma of mild steel for measuring aggregate : Heaving volume 0.03472 cm 336 Masonry grinder 337 Cutter, pipe wheel type : 6 mm to 25 mm 338 Caliper outside : 150mm 339 Steel tapes : 5 Meter long 340 Hammer ball peen : 800gms. 341 Cutting pliers 342 Inside caliper : 150mm 343 pointing Trowel : 6 344 Steel float 345 Measuring tape : 15 Meter long (Steel) 346 Bar bending lever (suitable diameter and length) : In m 347 Float wooden 348 Chisel : different sizes 349 Plumb bob : 50gms. 350 Bending pipes (suitable diameter and length) : In M 351 Line pin corner block 352 Wire brushes 353 Bending pipes : suitable dia& length in m 354 Total station latest model with all accessories 355 DGPS-latest version 356 Motorised sieve shaker 357 Floor polishing machine 358 Concrete vibrator : pin type & plate type 359 Electric drilling machine : 6 to 35 mm by 0.2 mm. for drilling 360 Power operated cutting machine 361 Vibrating machine : 12000 ± 400 rpm 362 Portable hand bender of suitable size 363 Spray painting machine 364 Drums : 200 liters capacity 365 Polishing machine 366 Abney level 367 Electric heater 368 Computing scales five hectares 369 Gunters chain 370 Offset scale for cadastral survey 371 Computing scales two hectares 372 Indian pattern clinometers 373 Telescopic/ adjustable spans 374 Straight edge 375 Steel / plywood shuttering plates 376 Hammer 5 kg 377 Water tube : 6m 378 Hammer 1 kg 379 Magnifying glass 380 Marking rope & thread : 15m 381 Chisel cold flat : 20 x 250 mm 382 File flat rough : 300mm 383 Four stroke petrol engine with CNG setup-working Condition 384 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 385 Disk brake in working condition with caliper assembly with all parts 386 Drum brake assembly in Working Condition 387 Cut section working model of automatic transmission Gear box 388 Radiator cut section-cross flow 389 Cut section working model of Single plate clutch Assembly 390 Cut section of cross ply and radial tyres 391 Tyre pressure gauge with holding nipple 392 Vernier caliper : 0-300 mm with least count 0.02mm 393 Different type of piston model : 3 Different Types on board 394 Spanner, ring set of 12 : 6 to 32 mm. (metric) 395 Philips Screw Driver set of 5 pieces : 100 mm to 300 mm 396 Fuel feed pump for Diesel : Hand operated Plunger Type 397 Piston ring compressor 398 Piston Ring expander and remover. 399 Outside micrometer : 0-25mm 400 Automotive oil pump for dismantling and assembling 401 Valve Lifter 402 Carburetor – Solex : Solex for dismantling and assembling 403 Caliper inside with spring : 15cm 404 Calipers outside with spring : 15cm 405 Pliers combination : 20cm 406 Gasket Cutter : 5-35mm 407 Circlip pliers Expanding and contracting : 15cm 408 Dividers with spring : 15cm 409 Hammer Ball Peen : 0.75kg 410 Hammer Mallet 411 Hammer Plastic 412 Feeler gauge 20 blades (metric) 413 Hydraulic jack HI-LIFT type : 3 Ton Capacity 414 Two wheeler (refurbished) 415 Demonstration board of MPFI system : With injectors, rail, inlet manifold, throttle body, distributor, ECU, purge valve, sensor, crank pulley, fuel tank module. 416 Work bench : 250 x 120 x 60 cm with 4 vices 12cm Jaw 417 Torque wrenches set : 5-35 Nm, 12-68 Nm & 50-225 Nm 418 Battery –charger : Capable to charge batteries from 5AH – 150AH. 419 Battery –charger : Capable to charge batteries from 5AH – 150AH. 420 Spanners socket with speed handle, T-bar, ratchet and universal set of 28 pieces with box : up to 32 mm 421 Spanner D.E. set of 12 pieces : 6mm to 32mm 422 Steel tool box with lock and key (folding type) : 400x200x150 mm 423 Allen Key set of 12 pieces : 2mm to 14mm 424 Grease Gun 425 Electric Soldering Iron : 230 V 60 watts – 230 V 25 watts 426 Hacksaw frame adjustable : 20-30 cm 427 Hammer ball peen with handle : 0.5kg. 428 Electrician Screw Driver : 250mm 429 Flat File , second cut 25cm 430 File flat , bastard : 20cm 431 Hands file for Second cut flat : 20cm 432 Spanner, adjustable : 15cm 433 Scriber : 15cm 434 Test Jig box : PCB Jig Box, 220V, Dimension: 1.5x1x1 Feet 435 Different models of Water purifier, Microwave oven : set 436 Inverter set with stabilizer, battery charger, step down transformer : set. 437 Bonding machine 438 Different models of LED and LCD TV receiver 439 LCD Tester 440 SMD rework station 441 Soldering Station : Temp range: 200~480degC, Temp stability: +-2degC,Max power: 60W, Tip Compatibility: 900M Series, Inputvoltage: AC220V / 50 Hz 442 Battery tester : 2Ah-220Ah Internal Resistance Tester Accurate Digital Auto Battery Analyzer Digital Battery Tester 443 Bench power supply 444 Screwdriver set, tweezers, nose pliers, wire cutters etc. : in set. 445 PPM meter 446 Digital Multimeter (Black 2000 Counts) 447 SMD tester 448 Hot air gun 449 TDS meter 450 Soldering Iron : Soldering Iron 60W, Soldering Gun Solder Weld Welding Iron Tool 160-240 V 451 De soldering pump, 452 Dual CRO 30 MHz 453 Micro wave power meter 454 LED Magnifying Lamp, 220-240V 455 Electrical drill machine 456 BIOS programmer 457 Antistatic Mat (ESD Mat) : Electromark Esd Mat 6.5 X 2 Feet, Blue for static charge Dissipation 458 Hot air blower : 1500W Heat Gun cum Hot Air Blower with Dual Temperature Control 459 Back light Tester 460 Battery Booster : 12 volt dc adapter, 12V, Adapter, adaptor, battery booster 461 PTC heating element 462 Setter Hatcher Machine 463 Wt. Balance 464 Simple microscope 465 Chaff cutter 466 Vaccines as- RD, GD, IBD, Fowl Pox etc.Vaccinator, & First aid kit etc. 467 Rake, Fan, Litter material 468 Trevis/Crate 469 Milking machine 470 Sprayer 471 Poultry feeder, Drinker, water Heater 472 Postmortem set 473 Brooder, Brooder Guard & Hover 474 Mixer Grinder 475 veterinarians stethoscope 476 Thermometer 477 Haemometer 478 Setter Hatcher Machine 479 Aerator 480 Vaccines as- RD, GD, IBD, Fowl Pox etc. Vaccinator, & First aid kit etc.
Contract Date: Jan 16, 2026 Contract Value : ₹ 1.02 Crore
Government Departments No of Bidders 6
West Bengal View Result →
8.
Rural Development #10775743 Price Bid
Tender For Rahera Village Retrofitting Water Supply Schemetq. Motala Dist Buldana - Trial Bore 2 Taking Trial Bore (Core Bore Sampling) by Calyxe machine with TCT/NX bits together undisturbed strata samples for investigation in all types of strata soft soil, murum, hard murum with boulders, soft rock hard rock & quartizite etc. The item includes all Hire & running cost of Callyx Machine conveying all materials to site of work excluding conveyance of callyx, machine and back sampling all over burden strata in glass jar and core samples serially numbered at site in a wooden Core Box, Samples to be taken at 1.0 m interval and conveying to the place as directed by Engineer-in-charge, The diameter of bore in overburden shall be 100 mm and of NX size (50mm) in other strata. The item shall also include M.S. casing pipe of 2.5 mm thick plate in overburdern only and shall be 1.0 m above GL with cap over it. 3 In Overbuden 4 In Weathered Rock with Boulder 5 In Weathered Rock/ Soft Rock 6 In Hard Rock other than quartzite 7 Supply Well 6.0 x 15.0 Mtr Deep 8 Excavation in general in Soft material comprising ofsoft soil ,hard murum with boulders etc as required in wet or dry condition for head worksincluding removing the excavated material upto a distance of 50m beyond area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling etc complete. 9 Lift0.00to 1.50 m 10 Lift1.50to 3.00 m 11 Lift3.00to 4.50 m 12 In the Submergence of Dam 13 Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock etc by blasting / controlled blasting, chiselling as required in wet or dry condition for Head works i.e. Intake well connecting pipe, Jack well, Pump House, supply well etc. for lift 0 to 1.5 and lead of 150 m including baricating, quarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge excluding refilling. 14 In the Submergence of Dam 15 Lift4.50to 6.00 M. 16 Lift6.00to 7.50 M. 17 Lift7.50to 9.00 M. 18 Lift9.00to 10.50 M. 19 Lift 10.50 to 12.00 M. 20 Lift 12.00 to 13.50 M. 21 Lift 13.50 to 15.00 M. 22 Providing and laying in situ 1:2:4 (M-150) grade of C.C. of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including dewatering from work, compacting and curing, finishing etc. complete with initial lift of 1.50m below / above ground level. 23 P.C.C M150 For Foundation 24 Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) 25 Footing in M300 26 Lift 5.00 to 10.00 27 Providing and casting in situ C.C. of trap/ granite/ quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, from work, compaction, finishing the formed surface with CM 1:3 of sufficient minimum thickness to necessary or roughening if special finish is tobe provided and curing etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use for L&T, ACC, Ambuja, Birla Gold, Manikgad, Rajashree etc. cement is permitted excluding M.S. or Tor reinforcement)For RCC M-300 grade slabs / Landings / Vertical Walls/ Waist Slabs / Steps for Staircase. 28 Walling ( Lift 0.00 to 5.00 m.) 29 Walling ( Lift 5.00 to 10.00 m.) 30 Beam(Lift 0.00 to 5.00 m.) 31 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15cm layers with all leads and lifts including consolidation, surcharging etc. complete. 32 Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing of water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel ) etc. complete. 33 Providing and fixing in position steel bar reinforcement of various diameter for RCC pipes, caps, foootings, foundation, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardies, copings, fins, arches, etc as per detailed designs, drawing and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. ( including cost of binding wire ) Tor steel. 34 Lift 0.00 to 5.00 35 Lift 5.00 to 10.00 36 Providing structural steel work in single stanchions composed of RSJ, channel etc with caps, bases, mild steel plates, angles, brackets cleats, gusset plates, anchor bolts, etc as per detaild design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/ bolted/ wided connections and one coats of anticorrosive paint and over it two coats of oil painting etc complete. 37 Carrying out recuparation / Yield test for ascertaining the discharge of constructed well / excavated profile as directed by Engineer - In - Charge. The test carried out by drawing down water from the well / profile below normal / subsoil water level upto full depth rise is recorded. The normal water level / subsoil water level / subsoil water level in the well / profile as well as strainer / suction level at pump as per design of W.S. Scheme shall be recorded prior to the test including cost of all materials, overload, labours etc. complete as directed. 38 Switch room 2.50 x 2.50 x 3.0 Mtr 39 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed forfoundation and excluding backfilling, etc. complete. 40 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. roadremoving the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-incharge, normal dewatreing, preparing the bed forfoundation and excluding backfilling, etc. complete. 41 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road by all means including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. 42 Providing dry trap/granite/gnesis/quartizite Rubble stone soling 15 cm to 20 cm thick including hand packing etc complete 43 Providing and laying in situ following grades of Plain Cement concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including normal dewatering, form work, compaction and curing, etc, complete. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) etc complete. 44 Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, plywood form work, bully/steel propups, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) 45 A) For RCC Foundation 46 B) RCC Column 47 C) RCC Beam 48 D) RCC Chajjas 49 F) Top Slab 50 Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire). 51 Lift 0.00 to 5.00 M 52 Providing second class Burn brick Masonary with convential/Indian standard brick in cm 1:6 in superstructure including striking joints, racking out joints ,watering and scaffolding complete. 53 providing and fixing steel frame of angle50 x50 x 6 mm size for Door And Windows with 16 mm with mild steel bars horizontally at 10 cm/c/c for ventilator portion and at 15 cm c/c for remaining portion etc complete. 54 Providing and Fix Steel windows of Various sizes as per detailed drawing without hot dip zinc coating,ventilators,including fabricating/ glazing with pain/obscured glass panels etc Completd. 55 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm to 20cm layers including watering and compaction complete. 56 Providing internal cement plaster 12 mm thick in single coat in CM 1:4 without neeru finish to concrete or brick surfaces, in all position etc completed 57 Providing internal cement plaster 20 mm thick in single coat in CM 1:4 without neeru finish to concrete or brick surfaces, in all position etc completed 58 providing and applying water proofing treatment using Acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid(2:1) by weight covering 9 to 10 Sqm/Kg etc complete. 59 Providing and laying Polished Shahabad Stone flooring 25 mm to 30 mm thick and required width wide inplain/diamond pattern on a bed of 1:6 C.M.including cement float,filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete. 60 Providing and applying Two Coatsof Water proof cement paints of approved colour and shed to new surfaces in two coats included scaffolding and preparing the surface (Excluding primer coat) etc Completed 61 providing and applying Washable Oil Bound Distemper in two coats in old/newplastered or masonary surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and blooming down complete. 62 Providing and applying Two Coats of lead/zinc base Oil Paint bituminious paint of approved to new structural steel work and iron work in building including scaffolding if necessary ,cleaning and preparing the surfaces. 63 Swith room electrification (2TL + 1 Plug ) 64 Pure Water Pumping Machinery 7.5 HP &Head 48M 65 Providing, errecting and giving test of submersible Pump set confirming to I.S. 8034 and motor confirming to I.S. 9283 with water proof wiring, pump shall be suitable for 64m delivery head and discharge of 4.90 LPS with stainless steel shaft, motor suitable for working 415V(+/-) 10%, 3 Phase, 50 Hz AC supply with cable guard, thrust carbon bearing to withstand entire hydraulic thrust. The pump shall be suitable for direct coupling with suitable suction, straining pump should have suitable discharge outlet as per manufacturers design. Stream lined non return valve shall be provided with pump, 3m submersible copper conductor cable and 2 pair of erection clamps, 65mm width, 150mm Dia thick shall be provided with each pump. 66 7.50HP Submerssible Pumpset 67 17562LPH Discharge 68 48Head in M. 150 MM Dia. 69 Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004. 70 100mm Dia. G.I. Pipe ( Heavy ) 71 Lowering, laying and jointing G. I. pipes and specialsof following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directedby Engineer-in-charge. 72 100mm Dia. G.I. Pipe ( Heavy ) 73 Providing and Fixing ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Reflux valves as per I.S.5312 Part I (1984) 74 100 mm dia Non return valve PN -1.60 75 Providing & fixing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 76 100mm dia sluicevalve PN -1.60 77 Providing & fabricating of suitable size base frame for submerssible pump sets. 78 Supplying errecting G.I. pipes A grade errected for enclosing armoured cable 25 mm diafor underground and above ground cable with etc. complete to cover the cable all over. 79 25 MM Dia G.I.Pipe 80 Making trench in soft soil of suitable width & depth for laying provided L.T cable up to 10 sq.mm complete.As per specification No. CW-EXN-CTR 81 Providing and fixing L.T. Panel comprising of ameter, voltmeter switches capacitor, water level guard etc. 82 7.5HP Pump 83 Providing & fixing electric cable ( flat ) 25 mm² for submerssible pump complete. 84 3 Core 10 Sqmm 85 Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. 86 EARTHINGSupplying & errecting galvanised cast iron earth plate size 60 x 60 x .6 cm complete with all materials , testing as per specification No.EA-EP 87 Providing & making flanged joints to flanged C.I pipes of all classes/specials etc including cost of all jointing materials ( rubber packing,nut bolts etc),labour,hydraulic testing etc complete. 88 100mm dia 89 Providing & fixing 100 mm dia. Pressure gauge. 90 Iyeze mobile Auto pro to monitor Pump. 91 Rising Main 110mm dia PVC 6 kg/cm2 ,L-2565 Mtr 92 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvemt cement, etc. complete (selffit type to be jointed with cement solvent). 93 110 mm dia 6kg/sq.cm 94 Providing ISI mark GI Pipe of followin classand dia excluding GST levied by GOI GOM in all respect, inspection charges,transportation to stores,etc completed as per IS-1239/2004 Note:One coupler Shall be provided with each full length of pipe cost of which is included in rates below 95 100 mm dia (M) 96 Providing and supplying Air Valves as per IS-14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance,third party inspection charges, loading, loading, transportation upto departmental stores, excluding 97 50mm dia Double BallAir Valve 98 Providing and supplying PVC/C.I / G.I. Specials as directed by Engineer in charge etc complete 99 (As Per General Note ) 100 Excavation for foundation / Pipe Trenches inall types of strata including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. ( Average Strata) 101 Lowering laying and jointing with P.V.C. pipes and spcials of Class and diameter including cost of conveyance from stores to site of work including cost of all labour, material except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete. (with cement solvent joint / ring fit joint), 102 110 mm dia 6 kg/sq.cm 103 Lowering ,laying and jointing G.I Pipes and specials of following class and dia including conveyance from store to site of works ,all labour etc complete.Complete either underground or in vertical position,as directed by Engineer in Charges. 104 100 mm dia (M) 105 Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting , placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments,labour,operation charges etc required for testing. the rateunder this item shall also include cost of retesting,if necessary and reinstalling to original position etc complete. 106 110 mm dia 6 kg/sq.cm 107 Hydraulic testing of G.I pipe line to specified pressure including cost of all materials and labour and water for testing for specified length upto 1Km using reciprocating type pumpswhich should be able to provide specified test pressure gauges andother necessary equipment,labour operation charges etc.required for testing, The rates under this item shall also include cost of retesting if necessary and reinstallingto origineal position. 108 100 mm dia (H) 109 Refilling the trenches with available excavated stuff with soft material first over pipelines and then hard material in 15cm layers with all leads and lifts including consolidation surcharging etc complete. 110 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee,providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc.complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) 111 Up To 150 mm 112 Replacing & Extended Existing Distribution System 113 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvemt cement, etc. complete (selffit type to be jointed with cement solvent). 114 110 mm dia 4kg/sq.cm 115 90 mm dia 4kg/sq.cm 116 Providing and supplying ISI mark G.I pipes of following class and dia.exclusing GST levied by GOI and GOM in all respect including inspection charges,transportation to stores etc complete as per IS-1239/2004 117 80mm Dia GI Pipe Medium class 118 Providing double flangessluice valve confirming for IS-14846 including worn gear arrangements as per testpressure, stainless stell spindle,caps including inspection charges, treansporation upto departemental store, undloading, stacking excluding GST levied by GOI GOM in all respect etccompletd. 119 65 mm dia CIDF Sluice valve 120 80 mm dia CIDF Sluice valve 121 100 mm dia CIDF Sluice valve 122 Providing and supplying PVC/C.I / G.I. Specials as directed by Engineer in charge etc complete 123 (As Per General Note ) 124 Excavation for foundation / Pipe Trenches inall types of strata including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. ( Average Strata) 125 Lowering laying and jointing with P.V.C. pipes and spcials of Class and 90mm diameter including cost of conveyance from stores to site of work including cost of all labour, material except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete. (with cement solvent joint / ring fit joint), Working Pressure 4 Kg./Sqm 126 110 mm dia 4kg/sq.cm 127 90 mm dia 4kg/sq.cm 128 Loweing and Laying and joiting with pvc Pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour,material except cement solvent, rubber ring giving satisfactory hydraulic testing as per IS Code etc complete (with cement solvent joint/ ring fit joint working pressure 4Kg/cm2) 129 80mm Dia GI Pipe Medium class 130 Hydraullic testing ofPVC pipe line to specified pressure including cost of all material and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipements, labour,operation charges, etc required for testing. The rate under this item shall also include cost of retesting, if necessary and retesting to original position 131 110 mm dia 4kg/sq.cm 132 90 mm dia 4kg/sq.cm 133 Hydraulic testing of G.I pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1KM using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipment, labour,operation charges etc. required for testing. The rates under this item shall also include cost of retesting 134 80mm Dia GI Pipe Medium class 135 Lowerin,Laying and jointing valves and specials of following class and diameter including conveyance from stores to site ofworks,all labour.giving satisfactory hydraulic test etc complete either underground or in vertical position as directed by Engineer- in -charges 136 65mm dia CIDF Sluice Valve 137 80mm dia CIDF Sluice Valve 138 100mm dia CIDF Sluice Valve 139 Providing and fixing C.I.Road Box Including loading unloading and carting to site of work including all necessary excavation in all types ofstrata and fixing in murum packing etc complete 140 100mm x 225mm (20KG/NO) 141 Refilling the trenches with available excavated stuff with soft material first over pipelines and then hard material in 15cm layers with all leads and lifts including consolidation surcharging etc complete. 142 Trial And Run 143 Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP/ Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-inchargea) For single village Without WTP 144 Note:Required chemicals to be supplied byDepartment free of cost and electricity bill willalso be paid by the Depertmen 145 a) For single village Without WTP 146 Miscellaneous Works 147 Providing and erecting chainlink fencing 1.6M .height with G.I. chainlink of size 50x50mm,8 gauge thick and fixed 75 mm above ground level on vertical M.S.Angles of 40x40x6 mm size, includind excavating pits for foundation and embedded in C.C.block of 1:4:8 mix of size 450x450x670mm. at 1.75M.c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angle sattopand bottom of 25x25x5 mm size and vertical M.S .flat 35x5mm and 25x5 mm horizontal including crosss upport of 40x40x6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450x450x670 mm including 3 coats of oil painting etc. complete 148 Providing and fixing M.S. gate 2.5 M wide for compound with 40 mm dia M.S.black pipe medium class, approved grill work, RCC M - 150 side pillars of 25 cm x 40 cm x 2.5 M height, its foundation, finishing, painting etc. complete
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Maharashtra View Result →
9.
Educational and Research Institute #10734365 AOC
Notice Inviting Etender For Procurement Of Equipment, Instruments, Machineries, Tools Charts Etc. Related To Laboratories And Workshop Of Engineering Institute For Junior Executives, Dalalpukur, Howrah-711104-1 Dead Weight Pressure Gauge Tester • Bourdon Tube Pressure Gauge As Manometer • Manometer With Transparent Scale • Manufactured From Corrosion Resistant Materials • Components Arranged On Base Plate. • Set Of Weights • Medium For Transmitting Pressure: Hydraulic • Capacity Of 25Kg / Cm2 • The System Is Nickel Chrome • The Weights Are Zink Iron ) 2 Cut Section Model Of Hermetically Sealed Compressor 3 Universal Bevel Protractor ( Accuracy: 0.01 Mm Material: Stainless Steel Diameter: 70 Mm Size: 300 Mm Type: Analog Graduation 5 Min Straightness .00016+ ( .00005Xl / 2 ) ) 4 Cut Section Model Of Lamont Boiler 5 Slip Gauge Set; Special Set ( M87 ) , Grade I, High Grade Steel, 9 Mm Wide & 30-35 Mm Long Cross Section. 6 Utm Machine ( Material:Ms Voltage:220 V Phase: Single Phase Capacity: 10 To 100 Ton Cross Travel: Up To 1000 Mm Weight: 1500 Kg ) 7 Mollier Chart Flex ( 40 × 30 ) 8 Teak Wood; Wood For Pattern Shop Size: 2×1×6 9 Thermal Conductivity Of Metal Rod; • Frame: Made Of M.S. Square Tubes & Sheets, Welded & Powder Coated • Optional Accessories: Rotameter For Water Flow Measurement • Electric Heater : Clamp Heater, Capacity 200 W, Supply 230 V Ac • Insulation Jacket: Made Of Mild Steel, Mild Steel Rod Is Insulated By Asbestos Powder • Diameter Of Metal Rod 25 Mm, Length Of Rod 300 Mm 10 Cut Section Model Of Screw Type Rotary Air Compressor 11.01 Chart Of Velox Boiler With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.02 Chart Of Mollier Diagram With Labelling ( Size: 23’’ X 36’’, Material: Pvc, With Roller ) 11.03 Chart Of T-T-T Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.04 Chart Of Utm Machine & Sample With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.05 Chart Of Torsion Testing Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.06 Chart Of Iron-Carbon Equilibrium Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.07 Chart Of Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.08 Chart Of Vernier Height Gauge With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.09 Chart Of Thread Measurement With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.10 Chart Of Gear Tooth Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.11 Chart Of Hermetically Sealed Compressor With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.12 Chart Of Domestic Refrigerator With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.13 Chart Of Full Pressure Engine Lubricating System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.14 Chart Of Constant Mesh Gear Box With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.15 Chart Of Synchromesh Gear Box With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.16 Chart Of Components Of A Chasis With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.17 Chart Of Knuckel Joint With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.18 Chart Of Intersection Of A Prism And Cone ( Size:30× 40, Material: Pvc, With Roller ) 11.19 Chart Of Projection Of A Straight Line In Different Quadrants ( Size:30× 40, Material: Pvc, With Roller ) 11.20 Chart Of Plummer Block - Details And Arrangement ( Size:30× 40, Material: Pvc, With Roller ) 11.21 Chart Of Centrifugal Pump With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.22 Chart Of Balanced Type Vane Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.23 Chart Of Bent Axis Piston Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.24 Chart Of Lathe Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.25 Chart Of Single Point Cutting Tool Geometry With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.26 Chart Of Screw Jack Assembly With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.27 Chart Of Cotter Joint Assembly And Design With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.28 Chart Of Vertical Drilling Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.29 Chart Of Shaper Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.30 Chart Of Safety On A Lathe Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.31 Chart Of Safety On A Milling Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.32 Chart Of Safety On A Shaper Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.33 Chart Of Safety In Carpentry Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.34 Chart Of Safety In Fitting Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.35 Chart Of General Precaution In Workshop ( Size:30× 40, Material: Pvc, With Roller ) 11.36 Chart Of Cnc Turning With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.37 Chart Of Elements Of Jigs ( Drill Bushes ) With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.38 Chart Of Tig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.39 Chart Of Mig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.40 Chart Of Engine Cooling System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 12 Digital Lab Trainer ( Bread Board Model ) ( Built-In Dc Regulated Power Supply; At Least 8 Logic Input Switches; At Least8 Output Led; Pulse Generator For Clock Frequency ; Patch Chords ) 13 Arduino Uno Board ( Atmega328 ) 14 Experimental Kit To Study Pam, Pwm And Ppm Modulation And Demodulation ( Pulse Generator With Variable Frequency And Amplitude, Pam Modulator And Demodulator, Pwm Modulator And Demodulator, Ppm Modulator And Demodulator ) 15 Ujt Trainer Kit With P.S. & Patch Cord 16 Led Colour Tv Demonstration Kit ( Display Type: Led, Hd: Screen Size: 24: Connectivity: Usb, Hdmi, Av: Test Points To Be Present Minimum 10 Nos.: Switched Faults To Be Provided: Product Tutorial Should Be Present ) 17 Microwave Oven Demonstration Trainer Kit ( Type: Solo: Capacity: 17 Ltr.: Control Type:Mechanical: All Circuits & Panels To Be Mounted On-Board: Test Points To Be Provided To Analyze Signals: Instruction Manual To Be Provided ) 18 Washing Machine Demonstration Trainer Kit ( Application: Lab Experiment: Semi-Automatic: Tank Capacity: 6.5 Kg: Block Diagram & Circuit Diagram To Be Mounted On The Lid: Test Points To Be Provided ) 19 Mobile Communication Trainer Kit To Study Various Signalling And Fault Insertion Techniques ( Gsm Handset Trainer Kit.  Operate Both On Windows And Linux Platform  Usb Interface For Communication  Best Suitable For Iot Gateway Application  External Connector To Interface With Any Microcontroller  Easy Understanding Of At Commands  Real Time Operation  Built In Network Status Led  Audio Interface Connector  Simple / Easy Operation  External Antenna  Application Module Relay Interface For Ac Device ( Optional ) ) 20 Trainer Kit For Mobilephone Set To Study Transmitter And Receiver Sections In Mobile Handset And Measure Frequency Band Signal ( Real Time Mobile Operation # Full Understanding Of Mobile Phone Working # Frequency Measurement And Band Verification # Provides Study Of All Sections In Mobile Phone # Tx / Rx Frequency Measurement # 3G / 4G Technology And Gmsk Signals # Gsm Data Rate # Detail Study Of User Interface Control Signals # Detail Study Of Sim Operation # Battery Identification And Charging Study  Switched Faults 21 Consumable ( 9V Battery, Cro Probe, Digital Ics ) 22 Cro ( 20 Mhz , Dual Trace, Dual Channel ) 23 Trainer Kit For Mobile Phone ( Features : The Experimental Kit Will Be Capable I ) To Study General Block Diagram Of A Mobile Phone. Ii ) To Study Mobile Transmission Section. Iii ) To Study Mobile Reception Section. Iv ) To Study Different Nos. Of Faults Provided With The Trainer. V ) To Study & Observe Voltages / Waveforms Of Each Test Points. Vi ) To Study Mobile Charging Circuits. Vii ) To Use Mobile Phone As Modem For Using At Commands As Given; A ) Sending Text Messages, Read / Delete Massages Etc. B ) Calling To A No, Reject / Accept The Incoming Calls Etc. C ) Gprs Related Commands. Study Of Bluetooth Technology & Connection With Other Bt Devices. Bluetooth Profiles : Bip, Bpp, Dunp, Ftp, Hid, Opp , Sap, A2dp, Pbap, Spp Etc. To Study General Idea Of Sim Card. ( Local Sim Card Must Be Inserted By The User At The Time Of Experiment ) . ) 24 Salt Bath Furnace For Heat Treatment ( • Resistance Heating ( Element ) • Operating Temp.: Up To 1200°C • Digital Temp. Controller ( Pid ) • Chamber Size : 450Mm X 300 Mm X 300 Mm • Furnace Uniformity + / - 2°C • Temp Recorder With 2 Channel Placed At Opposite Sides • Salt For Use With Two Times Top Up • Spare Heating Element 2Pc ) 25 In-Situ Metallography Kit ( • Items: Portable Grinder / Polisher, Grinding Discs, Lapping Cloths, Diamond Pastes, Aerosol Spray, Replication Film, Paste, Reflector And Gumming Tape For Excellent Contrast Or Transparent Replica - Film Thickness - 125 Microns, 30 Microns, Replica Liquid, Glass Slides ) 26 Automatic Electrolytic Polishing Machine ( • Function: Fully Automatic Electrolytic Polishing And Etching With Automatic Scanning Function • Preparation Time: Within 30 Sec • Electrolyte For Low / High Alloyed Steels & Aluminium • Pump And Magnetic Stirrer • Integrated Cooling System ) 27 Micro-Hardness Tester ( • Test Load : 10, 25, 50, 100, 200, 300, 500, 1000 Gm • Scale: Knoop & Vickers • Dwell Time: 5-90 Seconds Settable • Objectives : 10X, 20X, 40X, 60X • Loading And Unloading : Motorized • Measurement – Automatic And Or With Manual Micrometer Eyepiece. • Traverse: Automatic And Or Manual With Micrometer. • Focusing - Motorized Focusing With Manual Over-Ride • Computerized Imaging Attachment, Dedicated Software To Measure Hardness On Computer With Report Generation Facility • Accessories: Sheet Holder, Wire Holder, Hardness Test Block, Bulb, Indenter. ) 28 Cracked Aluminum Test Block ( For Penetrant Sensitivity Checking In Dpt ) ( Aluminum Test Piece That Measures 3 X 2 X 3 / 8 With A 1 / 8 Wide With A Milled Notch That Separates The Blocks Two Sides To Facilitate Side-By-Side Penetrant Comparison. The Test Block Is Used To Check The Strength Of “In-Use” Penetrants. This Is Done By Processing One Half Of The Block With “Used” Penetrant, And The Other Half With Fresh Penetrant. Can Be Used To Compare Sensitivity Of Different Penetrants Or Sensitivity Of New And Old Penetrants. Complies With Astm E165 And Asme Boiler And Pressure Vessel Code Section V & Iii, And Mil-I-23135-C. ) 29 Pie Gauge / Magnetic Flux Indicator ( To Be Made From Eight Ferrous Segments, Braised Into A Single Piece, Providing A Star Pattern Of Nonferrous Discontinuities. Eight Linear Discontinuities To Provide Indications In All Directions Non-Ferrous Handle With Pivot. Specification Compliance • Mil-Std-271 • Astm E709 ) 30 20Mhz Analog Cro ( Dual Trace ) , Bandwidth:- Dc ~ 20Mhz ( -3Db ) Y Deflection:- 5Mv / Div ~ 10V / Div. Rise Time:- <18Ns，Mag _70Ns ：17.5Ns. Max Input:- 400V ( Dc+Acp-P ) 31 50Mhz Digital Storage Oscilloscope, Bandwidth 50Mhzreal-Time Sampling Rate 500 Msa / S, Equivalent Sampling Rate 50Gsa / S.Memory Depth: 32Kptstrigger Types: Edge, Pulse Width, Video, Slope, Alternativeunique Digital Filter Function And Waveform Recorder Function, Max Input:- 400V ( Dc+Acp-P ) 32 3D Model Showing Different Parts Of A Coal Fired Thermal Power Station 33 3D Model Showing Different Parts Of A Gas Fired Thermal Power Station 34 3D Model Showing Different Parts Of A Diesel Power Station 35 3D Model Showing Different Parts Of A Nuclear Power Station 36 3D Model Showing Different Parts Of A Hydro-Electric Power Station 37 3D Model Of Boiler Showing Its Different Parts Used In Coal Fired Thermal Power Station 38 3D Model Of Boiler Showing Its Different Parts Used In Nuclear Power Station 39 3D Model Of Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant 40.1 Colour Flex Chart Describing Different Parts Of A Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.2 Colour Flex Chart Describing Different Parts Of A Gas Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.3 Colour Flex Chart Describing Different Parts Of A Diesel Power Station Size:30× 40, Material: Pvc, With Roller 40.4 Colour Flex Chart Describing Different Parts Of A Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.5 Colour Flex Chart Describing Different Parts Of A Hydro-Electric Power Station Size:30× 40, Material: Pvc, With Roller 40.6 Colour Flex Chart Describing Different Parts Of Boiler, Used In Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.7 Colour Flex Chart Describing Different Parts Of Boiler, Used In Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.8 Colour Flex Chart Describing Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant Size:30× 40, Material: Pvc, With Roller 41 3-Phase Induction Motor Speed Control Using Pwm Inverter For Interpreting Speed-Torque Characteristics Using Vvvf Drive 42 Ups Trainer Kit ( 1Kva ) Output Voltage : 230 V Ac Nominal, Input Voltage : +12V Dc Battery. Capacity : 1Kva, Output Frequency : 50 Hz Accuracy : + 5%. Switching : Automatic. 43 Smps Trainer Kit Incl. ±5V, ±12V Input Voltage: Ac 100 – 264V 50 / 60Hz Output Voltage: 12V Dc, 0-5A Output Voltage: Adjustment Range: ±20% Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal Ac Input / Full Range 100% Full Load Burn-In Test Cooling By Free Air Convection High Quality And High Performance Led Power Supply With A Metal Body For Hidden Installation For Led Lighting Design With Built-In Emi Filter, Improve Signal Precision. Certifications: Ce & Rohs No Minimum Load. Compact Size Light Weight. High Efficiency, Reliabiltiy & Low Energy Consumption Controller: Satandard 44 Commutation Kit Of Scr ( Class A To F ) Completely Self – Contained Stand – Alone Unit. Demonstrates The Principle And Various Methods Of Forced Commutation Of Scr. 1. Self-Commutation By Resonating Load ( Class “A” Method ) . 2. Self-Commutation By An L C Circuit ( Class “B” Method ) . 3. Complimentary Commutation ( Class “C” Method ) . 4. Auxiliary Commutation ( Class “D” Method ) . 5. External Pulse Commutation ( Class “E” Method ) . * Supply Required 230V, 50Hz Ac. * Built-In Ic Based Dc Regulated Supply And Led Indication For Supply “On”. * Built-In Load Facility In The Form Of Led’S. * Connecting Each Circuit Separately And Verifying Its Principle. * Multicoloured Test Points Are Provided To Observe The Waveform And Voltages. * Set Of Required Number Of Patch Cords. * Housed In An Elegant Cabinet With A Well Spread Intelligently Designed Circuit Layout Engraved On The Front Panel. * Strongly Supported By A Comprehensive Instruction Manual Complete With Theory And Operating Details. 45 Colour Flex Chart Describing Single Line Diagram Of A Given Distribution System ( Lt & Ht ) Size:30× 40, Material: Pvc, With Roller 46 Colour Flex Chart Describing Short Transmission Line ( 220Kv ) Size:30× 40, Material: Pvc, With Roller 47 Colour Flex Chart Describing Medium Transmission Line ( 220Kv ) ( Both T & Π-Model ) Size:30× 40, Material: Pvc, With Roller 48 Power Factor Improvement Kit Using Static Condenser Including Load R-L Load Of At Least 2Kva With Appropriate Capacitor Bank. 49 Setup For Load Test On 1-Ph Induction Motor: Load Test Kit Of 1-Ph Induction Motor ( 1Hp, 230V, 50Hz ) 50 Loading Test Kit Of 3-Phase Alternator: ( 2Kw, 415V, 50Hz ) With 3-Ph R-L Load Box Coupled To A Dc Motor; Capable To Perform As Synchronous Motor Test With Dc Generator Load; Integrated With All Required Measuring Instruments 51 Speed Control Kit Of Stepper Motor Including Reversing Arrangement With 8051 Microcontroller: Stepper Motor Of Appropriate Capacity To Be Served By 8051Μc 52 Speed Control Kit Of Ac Servo Motor: Motor Spec: 3000Rpm, 200W, 0-240V, Control Torque: Standard With All Needed Accessories 53 Speed Control Kit Of Dc Servo Motor: •Voltmeter Vdc 3.5 Digit. 200Mv •Rpm Indicator For Speed Measurement •Voltmeter Vdc 3.5 Digit 20V Power Supply: •Ic Regulation In Controller Circuit Power Supplies •Operated On Mains Power 230V, 50Hz +10% Features: •Position Control Of A 12 Volt, 1 Amp Dc Geared Pm Motor ( 50 / 60 Rpm ) •Calibrated Dials With 1 Degree Resolution For Reference And Output Position •Two 360 Degree Servo-Potentiometers •Built In Step Signal •Built In Waveform Capture / Display Card For Study Dynamic •Electronic Techogenerator For Feedback •Non-Contact Eddy Current Break For Load •Speed Control Of 12V, 4W, Permanent Magnet Dc Motor •Speed Range Up To 3000 Rpm ( Typical 54 Mcb Test Kit For Performing Load Test: Kit Should Be Able To Perform Short-Circuit, Over Load, Thermal Trip Test For Mcb With Rating Upto 30A 55 Dismantled Elcb & Rccb Kit For Demonstration Purpose: Elcb: Single Phase 2 Pole Elcb, Rccb, Isi Marked 32A Mcb With High Voltage, Overload Protection, Current 3 To 30 Ma Rccb: Breaking Capacity 10 Ka, Frequency, 50 Hz, Number Of Poles 2P, Operating Characteristics: Ac Rated Current 40 A, Sensitivity 30 Ma, Standard, Is 12640-1 & Iec 61008-4, Test Button Yes 56 Testing Kit For Percentage Differential Protection Of Transformer Using Transformer Differential Relay ( Electromagnetic / Μp Based / Static ) : Standard For Laboratory Purpose 57 Colour Flex Chart Describing Different Parts Of Acb & Vcb ( 33Kv, 15Mva ) : Size:30× 40, Material: Pvc, With Roller 58 Experiment Kit To Measure Solar Radiation Using Pyranometer On Tilted Surface At Different Angle Inclination: Standard For Laboratory Purpose 59 Colour Flex Chart Describing Different Parts Of Solar Flat Plate Collector & Solar Concentrating Collector & Trough Collector: Size:30× 40, Material: Pvc, With Roller 60 Experiment Kit To Measure Thermal Performance Of Solar Water Heating System: Standard For Laboratory Purpose 61 3D Model Describing Different Parts Of ( I ) Solar Street Lighting System & ( Ii ) 1Kw Small Wind Turbine ( Swt ) : 3D Model For Laboratory Purpose 62 Setup Of 250Wp Solar Pv Plant Including All Accessories: Solar Panel Specifications:Peak Power: 250W; Maximum Power Voltage: 20.2V; Maximum Power Current: 12.38A; Open Circuit Voltage: 23.9V; Short Circuit Current: 13.12A; Power Allowance Range: + / - 3% Hybrid Inverter Specifications: Nominal Battery Voltage: 12V; Continuous Power Output: 1000W / 1000Va; Surge Power: 2000Va Output Voltage: 230V Ac; Output Frequency: 50Hz / 60 Hz; Output Waveform: Pure Sine Wave; Maximum Solar Input Power: 600W; Maximum Open Circuit Solar Input Voltage: 55V; Maximum Solar Charging Current: 50A; Maximum Mains Ac Charging Current: 20A; Maximum Combined Charging Current: 50A; Peak Efficiency: 93% Battery Specifications ( Per Battery ) : Nominal Voltage: 12V; Nominal Capacity: 50Ah ( 10H Rate ) / 55Ah ( 20H Rate ) ; Maximum Charging Current: 25A; Self-Discharging Rate: <3% Per Month; Cycle Lifetime At 30% D.O.D.: 1000-1100 Pressure Control: Safety Valve Installed Terminal Type: F13 ( Bolts And Washers Included ) Operating Temperature: From +10C To +40C 63 Setup Of Small Wind Turbine Plant Including All Accessories: Standard For Laboratory Purpose 64 Study Kit Of Assembling And Dismantling Of Csp Plant Using Parabolic Trough Or Disc: Standard For Laboratory Purpose 65 Study Kit For Assembling Vertical Axis Or Horizontal Axis Swt: Standard For Laboratory Purpose 66 Digital Lcr Multimeter: Digital Lcr Meter ( Battery Operated ) , Model: 4070 Range: 0.1Μh To 20H, 0.1Pf To 2000Μf, 0.1Ohm To 20Mohm Accuracy: 2Mh, Resolution: 1Uh, Accuracy: 20Mh, Resolution: 10Uh, Accuracy: 200Mh, Resolution: 100Uh Accuracy: 2Nf, Resolution: 1Pf, Accuracy: 20Nf, Resolution: 10Pf, Accuracy: 200Nf, Resolution: 100Pf, Accuracy: 2Uf, Resolution: 1Nf, Accuracy: 200, Resolution: ± ( 0.8 Percent+5 ) 0.1, Accuracy: 2K, Resolution: 1, Accuracy: 20K, Resolution: 10, Accuracy: 200K ( Make: Metravi ) 67 Handheld Power Meter Or Power Analyzer With Socket: Voltage: 85V-265V, Current; 0.002A~20A, 50Hz, 1-Ph 68 Analog Power Factor Meter ( 1-Ph & 3-Ph ) : Standard For Laboratory Purpose 69 Multimeter With Clamp Meter Arrangement With Hfe Lcr: Standard For Laboratory Purpose ( Make: Metravi ) 70 Three Phase Power Measurement Kit ( Y & Δ Load R-L Load ) Incl. 3-Ph Wattmeter With 2Kw Range: Standard For Laboratory Purpose 71 Kit For Troubleshooting Single Phase Electronic Energy Meter: 230V, 1-Ph, 50Hz 72 Three Phase Trivector Meter: Salient Features Class 0.5S As Per Relevant Is And Iec Standards 5A Current Rating 3 Phase 4 Wire 4 Quadrant Measurement Anti-Tamper Features Self-Diagnostic Capability Multiple Tariff / Time Of Day Feature Bidirectional Energy Recording Up To 4 Maximum Demand Registers Load Survey ( Interval Data ) Features Up To 12 Reset Backups Optical Port / Rs 232 / Rs 485 / Ir / Irda / Rf ( 2.4 Ghz / 865-867 Mhz ) ( Optional ) ( Make: L&T ) 73 Brake Test Kit Of Dc Series Motor: 220V Dc, 2Hp With Allied Required Accessories 74 Back-To-Back Test Kit Of Single Phase Transformer: 1-Ph, 240V, 50Hz, 1Kva ( 2 Nos. ) Identical Transformers With Other Standard Accessories 75 Isolation Transformer Kit: 230V; 230V / 10Amp 230V; 230V / 5Amp 76 Pulse Transformer Kit: Dc Supply: Two 5V & 12V, Pulse Generator: Two Selectable Frequency & Variable Pulse Width, Mains: 230V / 50Hz, Adequate For Cro Observations, Optocoupler: One, One Ferrite Wired 1:1 77 Colour Flex Chart Describing Different Vector Groups Of Theree Phase Transformer: Size:30× 40, Material: Pvc, With Roller 78 Full-Wave Fully Controlled Bridge Rectifier Kit With & Witout Filter Arrangement: Standard For Laboratory Purpose 79 Kit To Find The Characteristics Of Zener Diode: Standard For Laboratory Purpose 80 Kit To Find The Characteristics Of Mosfet: Standard For Laboratory Purpose 81 Ujt Relaxation Oscillator Trainer Kit: Standard For Laboratory Purpose 82 Singlestatge Transistor Trainer Kit ( Ce-Mode ) : Standard For Laboratory Purpose 83 Trainer Kit For Sr, D, Jk & T – Flip-Flop: Standard For Laboratory Purpose 84 Trainer Kit For Realization Of Encoder And Decoder Circuit: Standard For Laboratory Purpose 85 Trainer Kit For Realization Of Multiplexer And Demultiplexer Circuit: Standard For Laboratory Purpose 86 Trainer Kit For Implementing Dac & Adc: Standard For Laboratory Purpose 87 Connector Cables For Ade Lab. Of Different Types: Standard For Laboratory Purpose 88 Arduino Uno R3 Board With Lcd1602, Servo Motor, Relayes, Processing And C Code, Beginner Starter Kit With Mannual And Allied Accessories: Standard For Laboratory Purpose 89 Trainer Kit For 8051 Μc Programming: Trainer Kit For 8051 Μc Programming With Keypad To Write Program 90 Trainer Kit Using 8051 Μc For Measurement Of Ac Voltage, Current, Frequency & Phase Angle Using Suitable Ct, Pt, Zcd, Adc, Etc. 91 Demonstration Kit For Identifying Pvc, Xlpe, Vir, Catenary, Frls, Frlsh Cables / Wires Of Different Current Rattings: Standard For Laboratory Purpose 92 Megger: Insulation Tester ( 500V ) With Hand-Driven Gen.: 500V, 2500 Mega Ohms 93 Megger: Insulation Tester ( 2500V ) With Hand-Driven Gen. 2.5Kv, 2500 Mega Ohms 94 3-Ph Smart Energy Meter For Lt Power Measurement, 3-Ph, 415V, 4-Wire, Kwh Meter, Current: 10-60A, Class 1.0 Accuracy As Per Relevant Is And Iec Standards, With Lcd Display [ Make: L&T ] 95 Trainer Kit For Dc Chopper Drive With Resistive Load & Dc Separately Excited Motor. 1 / 8 Hp, 200Vdc Operation, Current Limit Protection, Speed Control Using Frequency And Duty Cycle Variation, Jones Chopper Based Control, Motor Loading Arrangement Can Be Provided / Resistive Load May Be Connected, Other Variety Of Controllers With Converter Control With Closed Loop Controller 96 Trainer Kit For Controlling The Speed Of Separately Excited Dc Motor By Changing The Firing Angle Of Scr Using 1-Ph Full Converter. Power Supplies: • Power Supply +15Vat 150Ma • Isolated Supply 0-220V At 5A. • Operated On Mains Power 230V, 50Hz +10% Digital Meters: • Voltmeter 2000V Ac • Voltmeter 2000V Dc • Ammeter 2A Dc Components Are Mounted On The Panels Are: • Scr Tyn604 ( 2 Nos. ) • Diode 1N5408 ( 2Nos. ) • Diode Ba159 • Ac Phase Control By Gate Control Firing Circuit. • Snubber Circuit. Load: • 1 / 2Hp Dc Shunt Motor. • Inductor As Load 230V, 1A • Lamp Load 230V, 60W 97 Μcontroller Based 3-Ph Syn. Motor Drive: Trainer Kit For Controlling The Speed Of Synchronous Motor ( 1Kva ) Drive Using Μc. 98 Demonstartion Kit Showing Different Types Of Power Semiconductor Devices With Heat Shink E.G. Scr, Igbt, Gto, Mosfet, Standard For Laboratory Purpose. 99 Kit For Magnetic Control Of Im: Control And Power Circuit For ( I ) Forward And Reverse Rotation Of Squirrel Cage Im Using Contactor, ( Ii ) Automatic Star-Delta Starter Of Squirrel Cage Im, ( Iii ) Dynamic Braking Of Squirrel Cage Im, Standard For Laboratory Purpose. 100 Screw Driver Set, Standard For Laboratory Purpose. 101 6” Slide Range, Standard For Laboratory Purpose. 102 Wire Stripper, Standard For Laboratory Purpose. 103 Crimping Tool ( 1 Sq. Mm. To 6 Sq. Mm. ) . 104 2.5 Sq. Mm. Stranded Pvc Copper Wire 105 1.5 Sq. Mm. Stranded Pvc Copper Wire 106 1 Sq. Mm. Stranded Pvc Copper Wire 107 Soldering Kit: 20W With Solder Material 108 Contact Type Tachometer ( Range: 0-10, 000 Rpm ) 109 Set-Up With Different Type Tl Lamps ( Conventional & Led ) With Fittings Containing Electrimagnetic Ballast / Electronic Ballast Etc.: Tl Fittings With: 1. Electronic & Electromagnetic Ballast For ( I ) Single 40W, 240V, 50Hz Tl, ( Ii ) 2X40w, 240V, 50Hz Tl, 2. 20W Led Tl With Fittings Incl. 110 3-Ph Capacitor Bank Of 2-4Kva For Correcting Power Factor Of 415V, 50Hz, 1500 Rpm, 2Hp, 3-Ph Squirrel Cage Im With Facility To Connect The Stator Of The 3-Ph Im Both In Star & Delta Mode And A Tri-Vector Meter Having Facility To Measure Kw, Kva, Kwh, Kvarh, Pf. 111 Transformer Oil Breakdown Strength Kit: Breakdown Strength Kit With 5 Ltr. Fresh Transformer Oil, Standard For Laboratory Purpose. 112 Chart For Demonstration Of Different Fire Extinguishers: Colour Flex Chart Describing Different Types Of Fire Extinguishers ( 4 X 3 ) , Material: Pvc, With Roller 113 Chart For Demonstration Of Artificial Respiration ( Cpr ) And Prepare A Report.: Colour Flex Chart Describing Different Types Of Artificial Respiration ( Cpr ) ( 4 X 3 ) , Material: Pvc, With Roller.
Contract Date: Dec 10, 2024 Contract Value : ₹ 11.21 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
10.
Educational and Research Institute #10680797 Price Bid
supply of tool machinery goods- 1 Connecting screw driver 2 Neon tester 3 Insulated combination pliers 4 Electrician knife 5 Soldering Iron Changeable bits 6 De- soldering pump 7 Soldering Iron 8 Optical Drives 9 Post error debugging card 10 PCI slot Testing tool 11 Network Management Software 12 Wireless Network Adapter 13 Router 14 LAN Cards 15 WI-FI LAN Card 16 Power Meter 17 Media Convertor 18 24 port UTP jack panel 19 NVR 20 POE adapters kit 21 IP Camera Outdoor 22 Analog camera with dvr 23 SMPS 24 Blu-Ray driveand player Dell/ hp/ toshiba 25 Digital Camera 26 Network storage 27 Card Reader 28 SMPS Trainer kit 29 Foot rule steel tape 30 Steel Measuring Scale 31 MARKING KNIFE 32 Try Square 33 Bevel Square 34 Carpenter marking gauge 35 Carpenter mortise gauge 36 Hand Saw 37 Metal smoothing plane Anant 38 Screw driver 39 Contraction measuring scale 40 Wi Fi Router 41 Switch 42 DVD or Blu-Ray Writer 43 Network Rack 44 Screw Driver Set 45 Mini Dongle for Bluetooth devicesConnection 46 Patch Panel 47 Punching Tool 48 Tally 49 Box drawing instrument 50 Protractor celluloid 51 Scales plotting box wood 6 metric scales 52 Set square transparent 53 Set square celluloid 54 T-Square 55 Template- Architects and builders 56 Telescopic Alidade 57 Levelling staff straight pieces 58 Transit Theodolite with stand with all accessories 59 Digital theodolite 60 Instrument for total station 61 DLP projector 62 First aid box 63 Screen for projector 64 Air conditioner 65 Document Camera Visualiser 66 Smart board-inter active board 67 Measuring Steel Tape 68 Combination Plier Insulated 69 Screw Driver Insulated 6mm X 150 mm 70 Electrician screw driver thin stem insulated handle 4mm X 100 mm 71 Heavy Duty Screw Driver insulated 72 Electrician Screw Driver thin stem insulated handle 73 Punch Centre 74 Knife Double Bladed Electrician 75 Neon Tester 76 Steel Rule Graduated both in Metric and English Unit 77 Hammer cross peen with handle 78 Connecting screwdriver 79 Neon tester 500 V. 80 Screw Driver Set 81 Soldering iron 82 Electrician knife 83 Tweezers 84 Digital Multimeter 85 Soldering Iron Changeable bits 86 De- soldering pump electrical heated manual operators 87 Precision set of screw drivers 88 Precision set of screw drivers 89 Precision set of screw drivers 90 Tweezers Bend tip 91 Steel measuring tape 92 Tools maker vice 93 Crimping tool pliers 94 Magneto spanner set 95 File flat second cut 96 File flat smooth 97 Plier - Flat Nose 98 Round Nose pliers 99 Hammer ball pen 100 Allen key set Hexagonal set of9 101 Tubular box spanner set of 6Nos 102 Magnifying lenses 103 Continuity tester 104 Hacksaw frame adjustable 105 Chisel Cold Flat 106 Hand Drill Machine Electric with Hammer Action 107 Bench Vice 108 Bench Vice 50 mm 109 DC Regulated Variable Programmable DC Power Supply 110 LCR meter Digital Handheld 111 Analog multimeter 112 Clamp meter 113 Dimmer starter 114 Autotransformer 115 Milli Ammeter AC 116 Op Amp trainer 117 Digital IC Trainer 118 Digital IC Tester 119 Digital and Analog Bread Board Trainer 120 POWER ELECTRONICS TRAINER with at least 6 nos of onboard applications 121 Electronic circuit simulation software with 6 user licenses 122 Different types of electronic and electrical cables connectors sockets terminations. 123 DSO colour 124 PAM PPM PWM trainer kit 125 AMFM Commercial radio receivers 126 Sensor trainer kit containing Various sensors like Thermocouple RTD Thermocouple  load cell strain gauge LVDT smoke sensors speed sensor Limit Switch Photo sensors Optocouplor Proximity Sensor 127 Fiber optic communication trainer 128 Seven segment DPM 129 LCD based DPM 130 SMPS of different make 131 UPS trainer 132 Mobile phone Trainer 133 Cell phone power source with charger chords for different cell phones 134 LCD TV Trainer kit 135 LCD TV 136 LED TV Trainer kit 137 LED TV 138 Home theatre system 139 Solar Training Kit Simulator 140 LED lighting system 141 Trammel 142 Steel Rule with metric British graduation 143 Compressor unit 144 Try Square 145 Pocker. 146 Caliper inside spring type 147 Mallet. 148 Caliper hermaphrodite spring type 149 Carrier for mounting components such as PB relay boxes. 150 Caliper outside spring type 151 Aviation Snips straight Cut 152 Cut section model for pneumatic components 153 Divider spring type 154 Planishing hammer. 155 Scriber 156 Centre Punch 157 Screw driver 158 Depthmicrometer. 0-25 mm 159 Stake grooving. 160 Hammer ball peen With handle 161 Comparators Gauge - Dial Indication with Stand and Bracket 162 Hammer ball peen With handle. 163 File flat - second cut 164 Engineer s try square knife- edge 165 File flat smooth 166 File half round second cut 150 mm 167 Vernier Bevel protector 168 Carbide Wear Block 169 Carbide Wear Block 170 Dot punch 171 Spirit Level metal Type - 2 172 Arm strong type tool bit holder 173 Combination Set 174 Arm strong type tool bit holder 175 Arm strong type tool bit holder 176 Stillson wrenches 177 Micrometer inside with extension rods 178 Vernier caliper 179 Adjustable pipe chain tonge to take pipes 180 Adjustable spanner 181 Screw pitch gauge Metric 182 Surface plateC.IGranite with Stand and Cover 183 Marking table Mild steel 184 Universal scribing block 185 V-Block pair with clamps 186 Punch letter set 187 Portable hand drill Electric 188 File knife edge smooth 189 File feather edge smooth 190 File triangular smooth 191 File round second cut 192 File square second cut 193 File flat second cut safe edge 194 File half round second cut 195 File round bastard. 196 File hand second cut 197 File card 198 Oil Can 199 Wooden handle forged Soldering Iron copper bit 200 Blow Lamp 0.50 liters. 201 Spanner adjustable 202 Double Ended tubular Box spanner set with Tommy bar 203 Glass magnifying 204 Clamp C 205 Hand Reamer set Tapar pin straight flute 206 Machine Reamer parallel Helical flute 207 Scraper flat 208 Scraper triangular 209 Scraper half round 210 Pipe wrench 211 Adjustable pipe die set BSP 212 Machine vice - Swivel Base 213 Machine vice - Swivel Base. 214 Sleeve drill Morse 215 Vice bench 216 Wing compass 217 Power tools for fastening 218 Different Profile gauges Plate type - For demonstration 219 Knurling tool Diamond 220 Knurling tool straight 221 Knurling tool Diagonal 222 Indexable boring bar with inserts 223 Machine maintenance mannual for Lathe Pedestal grinder Drill machine Power saw 224 Temperature gauge 225 Dowel pin straight 226 Standard Tap screws 227 Lapping plate 228 Caps screws 229 Drill gauges 230 Cast Iron Globe Valve Flanged type 231 C.I. Sluice Gate valve flanged type 232 Stop cock 233 Slip-on Forged steel Flange 234 Pipe threading die with handle 235 Pulleys for V-belt or Flat belt 236 V-belt and Flat belt 237 Packing gasket 238 Washer clutch keys jib cotter circlip 239 Bearing different types 240 Lifting sling 241 Bearing extractor 242 Pulley extractor 243 File half round bastard 244 REFRIGERATOR ( 365 LTR ) DOUBLE DOOR 245 GAS TANDOOR WITH SKEWER ROTI SET ( 12 SKEWERS ) COMMERCIAL 246 BAIN MARIE 2 PAN WELL 55.5 X 70 X 20 CM 247 CHINESE GAS BURNER DURA STEEL 60 X 24 X 30 248 SALAMANDER AVON REFRIGERATION 600 X 510 X 550 MM 249 ELECTRONIC GEYSER 25 LTR( HAVELLS, ADONIA )DIGITAL TYPE 250 DOUGH KNEADING MACHINE ( 5KG CAP )1000 WATT, STAND MIXER 251 WATER BOILER ( ELECTRICAL 15 LTR)2000 WATTS 252 MIXER CUM GRINDER FOOD PROCESSOR 1 NOX 1000 WATT,WITH 7 ACCESSORIES 253 WOK CHINESE KADAI 16 DIA METER 254 PRESSURE COOKER ( 5 LTR ) CAP 255 EGG CUTTER STAINLESS STEEL 256 STEAK HAMMER ALUMINUM 257 MS CUPBOARD INTERIO 2 DOOR WITH 3 SELVES 7 X 3 X 3 258 HAND BLENDER 250 WATT 259 SIZZLER PLATES ( 17-18 DIA) HEAVY FINE QUALITY 260 COFFEE URNS , ( 40 CUP CAPACITY) 261 CHINESE CHOPPER 262 MS CHOPPER 600WATT 263 KITCHEN KNIFE, BIG CARTINI 8 BLADE 264 VEGETABLE KNIFE 13 CM BLADE, MEYER CERAMIC KNIFE 265 BREAD KNIFE 8 BLADE 266 PASTA MACHINE , 150 WATT 267 WATER PURIFIER REVERSE OSMOSIS 6.5 LTS UV + UF 268 SODA MAKER MACHINE HEAVY DUTY INDUSTRIAL MODEL KVR - 8 FLAVOR 269 ESPRESSO MACHINE COFFEE GRINDER 1300 WATT 270 MINIBAR FRIDGE 271 LED 42” HD DISPLAY 272 MUSIC SYSTEM WITH DVD PLAYERS CONCEALED SPEAKER, 5.1 CHANNEL 273 ELECTRIC OVEN 20 LTRS (IFB, WONDER CHEF,HAVELLS) 274 DISPLAY FOOD CABINET OSHAM SLIDING DOOR ,814X 641 X 831 MM W X D X H 275 ROOM SERVICE TROLLEY HOME CENTRE MONTOYA TYPE 276 CARAFE BOROSIL SMALL WITH STRAINERS, 350 ML 277 CARAFE BOROSIL LARGE WITH STRAINERS , 700ML 278 SOUP FLASK TERMOSTEEL ( 500 ML ) 279 WATER FLASK THERMOSTEEL FLIP LID FLASK 1000ML SILVER 280 PASTA TROLLEY GOLDEN LINE 4 CASTOR WHEEL 281 EPABX SYSTEM + AVS MACHINE S- TECH CS432, 4 MAIN TRUNK LINES & 32 EXTENSION 282 SAFE DEPOSIT LOCKER / FORTE 40 BIOMETRIC SAFE 283 UMBRELLAS , CITIZEN 3 FOLD 284 STEEL CUPBOARD WITH UNBREAKABLE GLASS , INTERIO 4 SHELVES 7.5 X 3 X 2.5 285 FRIDGE WITH CABINET 275 LTR 286 VACUUM CLEANER WET & DRY 287 WASHING MACHINE 8KG FULLY AUTOMATIC 5 X 1400 RPM , INBUILT HEATER 288 WATER HEATER 25 LTRS HSE-SES , 2000 WATT 289 CARPET EXTRACTOR, CARPET CLEANER MACHINE 1100 , W PRO E X 25 290 HIGH PRESSURE JET CLEANER , KK PWIN 165 1800 WATT , 165 BAR 291 LUGGAGE RACK MINT WOOD H 27.5 X W 28.5 X D 12.8 292 HEAVY BOTTOM PAN 10 LTR NON STICK CANEROLI 40 CM 293 COOKER ( 2 LTR ) CLASSICS 2L ALUMINUM 294 MANDOLIN GRATER ADJUSTABLE SS 4 BLADES WITH HANDLE 295 PROBE THERMOMETER ( 75 - 100 DEGREE CELCIUS ) ST 9283B LCD , DIGITAL MULTISTEM THERMOMETER 296 CAKE STAND ( SS ) 13 TOP 297 HEAT PROOF GLOVES GRIPWELL KELVES PALM LEATHER HEAT RESISTANT GLOVES 298 GRINDING STONE FINE GRINDER STONE 10 299 PIZZA CUTTER STAINLESS STEEL 300 COOKIE CUTTER ( 5 SHAPES ) ALLAMWAR 12 PCS STAINLESS STEEL CUTTER SET 301 SANDWICH GRILLER / TOASTER SW X 400 700 WATT ( 302 JUICER MACHINE PHILIPS HR 1863/20 , 2 LTR 303 ROLLING BASE WOODEN 10 304 FRYING PAN NON STICK GRANITE FRY PAN ( 280 MM) BLACK 305 FRYING PAN LARGE NON STICK FRY PAN 240 MM0 306 CLEVER STAINLESS STEEL 2 IN 1 VEGETABLE SCISSORS 307 Steel rule 308 Outside spring caliper 309 Inside spring caliper 310 Hermaphrodite caliper 311 Divider spring 312 Centre Punch 313 Hammer 314 Cold chisel flat 315 File flat bastard 316 File flat 317 File flat smooth 318 Screw Driver 319 Scribing blockuniversal 320 Screw driver heavy duty 321 Spindle blade screw driver 322 Solid parallels in pairs different sizes in Metric 323 Oil stone 324 Punch letter set 325 Punch number set 326 Drill Chuck 327 File Half round 328 File triangular smooth 329 Reamer 330 Reamer adjustable 331 Tool bits holder Armstrong R.H. 332 Table chuck 333 Machine vice 334 Compound angle vice standard sine 335 Universal Machine Vice 336 Shaper tool holder turret type to suit the machine 337 Base chuck forslotter to suit the machine 338 Milling Cutter Side and face cutter 339 Milling Cutter Side and face cutter Adison 340 Milling Cutter Adison 341 Milling Cutter -Side and face cutter adison 342 Milling Cutter - Double Angle Unequal. adison 343 Milling Cutter - Double Angle Unequal. adison 344 Milling Cutter - Single Angle.. adison 345 Milling Cutter - Slitting Saw Cutter adison 346 Milling Cutter - Slitting Saw Cutter. adison 347 Milling Cutter - Shell End Mill.Parallel Shank end mills adison 348 Milling Cutter - Parallel Shank end mills. adison 349 Milling Cutter -mills. Parallel Shank end mills.. adison 350 Milling Cutter - Parallel Shank end mills… adison 351 Milling Cutter - Parallel Shank end mills.... adison 352 Milling Cutter - T Slot Cutter with Parallel Shank adison 353 Micrometer outside. 354 Micrometer depth gauge 355 Digital micrometer 356 Vernier Caliper 357 Direct reading vernier caliper 358 Combination set 359 Vernier bevel protractor 360 Telescopic gauge 361 Centre punch 362 Divider spring joint 363 Caliper odd leg spring joint 364 Wrench adjustable 365 Spanner double ended 366 Pipe wrench 367 Plumbing hammer weight 368 Four way reversible valve 369 Tape measuringgraduation in mm 370 Voltmeter ACDC portable precision grade Digital Panel board type 371 Rule steel 372 Drawing Board 373 Easel a Type stand 374 Hack Saw with Frame 375 Chisel Knife 376 Chisel Knife- 8mm 377 Chisel Knife- 10mm 378 Chisel Knife 20mm 379 Chisel Knife- 30mm 380 Diamond Glazier Knife 381 Paint Tin Opener 382 Shave Huck Knife 383 Glider Knife 384 Paint Burner Acetylene Gas 385 Screw Driver 386 Mild Steel Panels 387 Sink Stainless steel 388 Suction feed spray gun with accessories 389 Infra red lamp 390 Pneumatic Polishing Machine with Pads 391 Pipe vice 392 Pipe wranch 10 393 Pipe wranch 16 394 flat file- smooth finish 395 Circuler cut file 396 Raft cut 397 Pipe dai set metric Inches 398 Gun Spray with Gravity Feed Cup with Complete accessories with Complete accessories 13ltr 399 Gun Spray with Gravity Feed Cup with Complete accessories.. 400 Conventional Spray Gun For Pressure Feed 401 Pencil Hardness Tester 402 Air Compressor single Phase 1 HP 403 File - Flat - Bastard 404 File - Flat - Safe Edge 405 Cooling tower 406 File flat roughdouble cut 407 File half round fine double cut 408 File round finedouble cut 409 File flat fine double cut 410 File square finedouble cut 411 File triangular fine double cut 412 Try square 413 Divider spring joint 414 Caliper spring joint in side 415 Caliper odd legspring joint 416 Hammer ball pane 417 Cold Chisel flat and cross cut 418 Engineers rule 419 Tape measuring 420 Pliers flat nose 421 Line tester 422 Tweezers 423 Oil can 424 Surface Gauge universal 425 Bench vice 426 Hack saw tubular metal frame adjustable 427 Snip sheet metal straight nose 428 Snip sheet metal curved nose 429 Wooden mallet Nylon mallet 430 Round Punch 6mm 431 Round Punch 432 Round Punch 4mm 433 Screw driver plastic handle 434 Screw driver plastic handle Flat tip 435 Philips screw driver 436 Soldering ironexchangeable copper tip 437 Knife foldedstainless steel - 438 Tenon saw 439 Firmer chisel 440 Fire buckets 441 Quick couplesprocess tube adopter 442 Flaring tool set single type for tube. 443 Swaging tool punch type set of size for tube. external type for copper tube 444 Pipe cutter miniature for copper tube 445 Pinch of tool for copper tube 446 Ratchet spanner 447 Capillary plug gauge 448 Piercing pliers 449 Spanner double ended 450 Wrench adjustable 451 Wrench adjustable length 250mm 452 Valve key handleTreated as consumable 453 Hollo Punch hole for cutting gasket 454 Scissor gasketcutting stainless steel 455 L-Allen key 456 T-Allen key set 457 Pipe cutter withbuilt in reamer and space cutter for copper tube 458 Lapping plate 459 Hammer ball peen 460 Tap set withmatching drills 461 Tap set withmatching drills V to 462 Piercing Valve 463 Feeler gauge 464 Tape measuringgraduation in mm 465 Ammeter ACDCportable precision grade Digital Panel board type 466 Multi meter digital type 467 C.R.O Single beam 468 C.R.O Dual trace Double beam 469 A.F.O Oscillators 470 Pressure gauge 471 Compound gauge Digital type 472 Electronic leak detector 473 Sling psychro meter mounted on aluminum back 474 Stop watch 475 Multi meter 476 Sensor thermometer digital 477 filler guage 478 Wire gauge 479 Dial thermometer 480 Compressors testers for small hermetic compressors 481 Precision set of T5 T6 T7 screwdrivers- 482 Jacket stripper Coring tool for 500 series cable 483 Center conductor cleaner 484 Universal drop trimmer for RG 6/11 cables 485 F - connector tool for RG 6/11 cables 486 F connector compression tool for RG 6/11 cables 487 Solar Training Kit Simulator With built in meters for DCV DCA AC Multifunction Meter for ACI ACV Power Frequency Protection Circuits BS-10 terminals formaking the connection Single Dual axis tracking system Charge Controller PWM based MPPT Charging Stage Bulk Absorptions and Float 488 LED lighting system Measurement of Power Voltage Current Power Factor and Light output performance of different lighting products like LED CFL at variable inputvoltages 0 to 245V variable AC 489 PLC Systems with digital IP OP modules and software 6 Digital Inputs 24V DC. 4 Digital Outputs 24V DC 2K Words of memory 256 words of register. Powerful features like built in Floating Point Sub Routines etc.One RS232 C communication facility for PC interface. Three channels can be configured as follows Pulse width modulation output or Pulse train outputor High speed counter input. 490 Electronic Pneumatics Trainer kit 491 CRO dual trace 20 MHZ ( Component testing facilities ) 492 Steel wire Brush 50mmx150mm 493 carborundum 15 x 5 x 4 cm smooth 494 Straight edge gauge 2 ft. 495 Straight edge gauge 4 ft. 496 Surface gauge with dial test indicator plunger type i.e. 0.01 mm 497 Tachometer Counting type 498 Taps and Dies complete sets 5 types 499 Taps and wrenches - Metric 500 Temperature gauge 0- 100 deg c 501 Thread pitch gauge metric BSW 502 Timing lighter 503 Universal puller for removing pulleys bearings 504 V Block 75 x 38 mm pair with Clamps 505 Vacuum gauge to read 0 to 760 mm of Hg 506 Valve Lifter 507 Valve spring compressor universal 508 vernier caliper 0-300 mm with least count 0.02mm 509 Vice grip pliers 510 Voltmeter 50VDC 511 Hand Shear Universal 250mm 512 Solid Parallels in pairs Different size in Metric 513 Spanner Clyburn 15 514 Spanner T. flocks for 515 Spark lighter 516 Spark plug spanner 14mm x 18mm x Size 517 Spirit level 2V 250 05 518 Spring tension tester 519 Stake grooving. 520 Spanners socket with speed handle T-bar ratchet and universal upto 32 mm set of 28 pieces with box 521 Steel tool box with lock and key folding type 400x200x150 mm 522 Wire cutter and stripper 523 Car Jet washer with standard accessories 524 Chaser hard WV 9 to 40 T.P.I. set of 11 external. 525 Chaser hand WW 9 to 40 T.P.I. set of 11 internal. 526 Chisel 10 cm flat 527 Chisels cross cut 200 mm X 6mm 528 Circlip pliers Expanding and contracting type 15cm and 20cm each 529 Clamps C 100mm 530 Clamps C 150mm 531 Clamps C 200mm 532 Compression testing gauge suitable for diesel Engine 533 Connecting rod alignment fixture 534 Copper bit soldering iron 0.25 Kg 535 Cylinder bore gauge capacity 20 to 160 mm 536 DC Ohmmeter 0 to 300 Ohms mid scales at 20 Ohms 537 Depth micrometer 0- 25mm 538 Dial gauge type 1 Gr. A complete with clamping devices and stand 539 Dividers 15 cm Spring 540 Drift Punch Copper 15 Cm 541 Drift copper 10 x 15 12 mm 542 Drill point angle gauge 543 Drill twist 1.5 mm to 15 mm various sizes by 0.5 mm 544 230 V 25 watts Electric Soldering Iron 230 V 60 watts 545 Electric testing screw driver 546 Engineers square 15 cm. Blade 547 Engineers stethoscope 548 Equipment puncture in box 549 File flat 20 cm bastard 550 File half round 20 cm second cut 551 File Square 20 cm second cut 552 Files assorted sizes and types including safe edge file 20 Nos 553 Glow plug tester 554 Granite surface plate 1600 x 1000 with stand and cover 555 Grease Gun 556 Grover- 34mm. 557 6mm Grover 558 Growler 559 Hacksaw frame adjustable 20-30 cm 560 Hammer Chipping 0.25 Kg 561 Hammer copper 1 Kg with handle 562 Hammer Mallet 563 Hammer Plastic 564 Hand operated crimping tool i for crimping up to 4mm and ii for crimping up to 10mm 565 Hand reamers adjustable 10.5 to 11.25 mm 11.25 to 12.75 mm 12.75 to 14.25 mm and 14.25 to 15.75 mm 566 Hand vice 37 mm 567 High rate discharge tester cell tester 568 Left cut snips 250mm 569 Magneto spanner set with 8 spanners 570 Magnifying glass 75mm 571 Marking out table 90X60X90 cm 572 Multi Scan Tool 573 Multimeter digital 574 Oil Stone 15 cm x 5 cm x 2.5 cm 575 Oscilloscope 20MHz 576 Outside micrometer 0 to 25 mm 577 Outside micrometer 25 to 50 mm 578 Pat melting 579 Philips Screw Driver set of 5 pieces 100 mm to 300 mm 580 Pipe cutting tool 581 Pipe flaring tool 582 Piston Ring groove cleaner 583 Pliers side cutting 15 cm 584 Poker 585 Portable oil monitoring Indicator 586 Power Supply 0-12 v lamp 587 Radiator pressure cap 588 Rear axle assembly- gear box steering box assembly of the diesel engine 589 Right cut snips 250mm 590 Rivet sets snap and Dolly combined 3mm 4mm 6mm 591 Scriber 15 cm 592 Scriber with scribing black universal 593 Set of stock and dies - UNC UNF and metric 594 Shear Tin Mans 450 mm x 600mm 595 Sheet Metal Gauge 596 Soldering Copper Hatchet type 500gms 597 Sher Tinmans 300mm 598 Shovel 599 Ammeter 300A 60A DC with external shunt 600 Angle plate adjustable 250x150x175 601 Angle plate size 200x100x200mm 602 Arbor press hand operated 2 ton capacity 603 Auto Electrical test bench 604 Battery charger 605 Belt Tensioner gauge 606 Spanner ring set of 12 metric sizes 6 to 32 mm. 607 Blow Lamp 1 litre 608 AC alternator slip ring puller 609 Allen Key set of 12 2mm to 14mm pieces 610 Air blow gun with standard accessories 611 Alternator for tractor different type Mico , Bosch, tux 612 Hands file 20 cm. Second cut flat 613 Caliper outside spring joint 614 Caliper inside spring joint 615 Caliper odd-leg firm joint 616 Steel Rule 617 Scriber 618 Hammer ball peen 619 Centre punch 620 Prick punch 621 Divider spring joint 622 Safety goggles clear glass Good quality 623 Marking table CI 624 Bench vice 125 mm jaw 625 V - Block 626 Pliers flat nose 627 Micrometer Outside 628 Micrometer Inside 629 Vernier Bevel Protractor 630 Vernier Micrometer 631 Universal Dial Test Indicator - Plunger Type 632 Vernier Height Gauge 633 Plain Ring and Plug Gauge 634 Drill Twist Set 635 Reamer machine 636 Combination Drill Centre Drill 637 Tool Bit assorted sizes on holder 638 Chalk Board on mobile stand 639 Desk 640 Hand Chaser 641 Hand Chaser 642 Revolving Centrer to suit Lathe tailstock 643 Tool Cemented carbide assorted shaped External for steel turning 644 Machine Chase 645 Coventry Die head 646 Lathe Mandrels Diff. Types 647 Coventry Type Die Head Self opening 648 Stainless steel rule 649 Hack saw frame 650 File half round 651 File flat 652 Try square 653 Earth clamp 654 Electrode holder ESAB 655 Oxygen Gas Pressure regulator double stage ESAB 656 Acetylene Gas Pressure ESAB 657 CO2 Gas pressure regulator with flow meter ESAB 658 Argon Gas pressure regulator ESAB 659 First Aid box ESAB 660 Flash back arrester torch mounted ESAB 661 Flash back arrester cylinder mounted ESAB 662 Screw Driver 663 Screw Driver 664 Terminal screw Driver 665 Hammer Ball peen 666 Neon tester pencil bit type 667 Small crimping tools assorted 668 Spanner set DE 669 Screw driver set set of 5 670 File half round 2nd cut 671 File round 2nd cut 672 Soldering iron TONY 673 Neon tester 674 Spade 675 Sickle 676 Khurpa 677 Kasola 678 Trifali 679 Zindra 680 Dori (Nylon rope) 681 Wheel hand hoe 682 pH meter 683 Electrical conductivity meter 684 Flame photometer 685 Spectrophotometer 686 Atomic absorption spectrophotometer 687 Shaking apparatus 688 Distillation unit 689 Ammonia distillation unit (with heaters) 690 Gas connection 691 Sampling tools (augers) 692 Refrigerator 693 Gas cylinders with regulators 694 Gas cylinders with regulators 695 Gas cylinders with regulators 696 Incubator (with temperature control) 697 Infrared soil moisture estimation unit 698 Electric oven 699 Soil cores 700 Soil infiltratormeter 701 GPS system with mobile phone 702 Table top centrifuge 703 Auto Titrator 704 Battery charger
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Haryana View Result →
11.
Educational and Research Institute #10625357 Price Bid
Supply Of Instruments / Equipments=1.00 Flow Meter 1.01 Size : 40- 100 Mm 1.02 Flow Range : 25- 250Ml / Mnt 1.03 Volume Per Revolution : 0.309L 1.04 Greatest Pressure : 2.5 Mpa 1.05 Accuracy : ±0.2% 1.06 Repeatability : ≤0.05% 1.07 Standard Unit : Rise 2.00 Co2 Probe 2.01 Exact Application : Measurement Of Dissolved Co2 In Microalgae Culture 2.02 Measurement Range : 10 To 1000 Mbar Co2 2.03 Accuracy : ± ( 10 % Of The Reading + 10 Mbar ) 2.04 Operating Temperature :0 To 60 °C ( 32 To 140 °F ) 2.05 Mechanical Temperature Resistance : – 20 To 130°C ( – 4 To 266 °F ) 2.06 Operating Pressure : 0.2 To 2 Bar ( 3 To 30 Psia ) 2.07 Mechanical Pressure Resistance Max. : 3 Bar ( 42 Psia ) At 25 °C ( 77 °F ) 2.08 Response Time T90 : At 25 °C ( 77 °F ) < 120S 2.09 Steam Sterilizable And Autoclavable : Yes 2.10 Cable Connection : Ak 9 2.11 O2 Selective Membrane Material : Ptfe / Silicone 2.12 Shaft Diameter : 12 Mm 2.13 Available Lengths : 220- 320 Mm 2.14 Distance Between Sensor And Transmitter : 40Mm 2.15 Blind Transmitter : Ok 3.00 Palletizer Machine 3.01 Body Material : Hardened Mild Steel 3.02 Output Capacity : 20 To 50 Kg / Hr 3.03 Pallete Size Die : 8Mm To 10Mm 3.04 Motor Power Capacity : 3 To 5 Hp 3.05 Roller : 1 Set 3.06 Palletizer Mill Weight : 90 Kg 3.07 Palletizer Mill Size ( H X L X W ) : 36 X 48 X 24 3.08 Movement Of Palletizer Mill : Trolley On Wheels 3.09 Shape Of Hopper : Round 4.00 Shredder Machine 4.01 Cutting Mechanism : Twin Shaft 4.02 Shred Chamber ( Mm ) : 310×310 4.03 Shred Size ( Mm ) : 8×50-100 4.04 Shred Capacity : 200-300 Kg / Hr 4.05 Voltage : 415V 4.06 Power : 3 Hp 4.07 Hopper Volume ( Liters ) : 60 L 4.08 Waste Volume ( Liters ) : 180 L 4.09 Weight : 275 Kg 4.10 Running Cycle : Continuous 5.00 Soxhlet Appratus 5.01 Automatic Pc Compatible Solvent Extraction System ( Digital ) 5.02 • Fully Automatic Programmable Six Place Auto Sequencing Pc Compatible Solvent Extraction System 5.03 • Tft Graphic Touch Screen Display With Unique Wireless Mouse To Operate Directly Without Connecting To Pc. 5.04 • Icons To Represent Output Of Heating Process In Touch Screen Display 5.05 • Selectable Programs ( Customizable ) : Integrated Auto Sequencing Features With Intelligent Memory Programs Minimum 50 Programme With 10 Sequencing Steps With Inbuilt Datagger With User Id, Channel Name, Scan Rate, File Browse Feature To Download Stored Data With Inbuilt Software For Usable Csv And Excel Format 5.06 • Data Logger With Real Time Clock With Memory Stick For Data Storage With Separate Port In Mother Board Apart From Pc Port 5.07 • The Advanced Superior Pc Chart Software Performs Live Graphical Representation Of Time / Temperature Gradient On Touch Screen Display Directly. 5.08 • Temperature Range: 35°C ( Ambient ) To 300°C, Temperature Accuracy / Precision : + 0.5° C 5.09 • Temperature Controller Should Be Isolated Separately In A Control Tower To Protect Electronics From Solvent Area & Heat Zone For Safe Operation 5.10 • Measuring Range: 0.1 To 100% Fat / Oil 5.11 • Repeatability: + 1% Or Better 5.12 • Speed Of Extraction: 40 To 60 Minutes Depending On Application 5.13 • Auto Phase Change Of Extraction Includes Boiling, Condensation, Rinsing, Solvent Recovery & Predrying 5.14 • Inbuilt Airpump, Ss Manifold, Automatic Collection Of Recovered Solvent, Versatile Sizes Of Thimble ( Extra Thimble Should Be Provided ) 5.15 • Upgradeable Remote Control Module For Wireless Data Monitoring, Control And Transfer To Pc At A Distance Of 5-10 Feet. The Entire Display Screen Of Controller Should Wirelessly Appear In The Pc / Laptop Of User, To Monitor & Control From His Work Table. 5.16 • Electrical Requirement:230V / 50Hz. Ac Mains. 5.17 Refrigerated Water Cooling Circulating System 5.18 • Refrigerated Water Cooling Circulating System With Digital Display Of Temperature, 5.19 • Microprocessor Based Pid Temp. Controller, Temperature Range: 10°Cto 20ºc. 5.20 • Inbuilt Safety Features With Ce Certification To Fulfil All Statutory Requirement Of Good Laboratory Practice. Auto Over Temperature Protection / Auto Error Indication / Auto Sensor Break Protection, Over Load Protection. 5.21 • Ss Tank, Submergible Pump For Recirculation, Ms Powder Coating Housing 5.22 • The Instrument Should Be Approved Registered Brand & Shall Strictly Confirm To The Specifications With Relevant Brochure & Photograph As Per Specification. 6.00 Recirculating Chiller 6.01 Temperature Range: -10~100ºc 6.02 Precision:±0.2 6.03 Cooling Capacity At 20°C -800W 6.04 Interior Dimensions:150X160x150mm 6.05 Chamber Volume:4.5L 6.06 Electrical Requirement:220V 50Hz 6.07 Pump Flux:8L / Min 6.08 Power Consumption : 2300W 6.09 Microprocessor Temperature Controller 6.10 Audible And Visible Alarm For Temperature And Water Level 6.11 R134a Refrigerant, Imported Compressor With Interface To External Water Bath 6.12 Rs485 Connector To Connect Computer To Record The Parameters And The Variations Of Temperature. 7.00 Portable Gas Analyser ( Syn-Gas ) 7.01 Method Of Detection : Ndir Infrared Sensor For Co, Co2 And Ch4 Electrochemical Sensor For O2 & H2 7.02 Ranges Available O2 0-25.0%, 0-50.0%, 0-100.0% Co 0-10.0%, 0-50.0%, 0-100.0% Co2 0-10.0%, 0-50.0%, 0-100.0% Ch4 0-50.0%, 0-100.0% H2 0-5.0% 7.03 Resolution : 0.1% For All Gases 7.04 Accuracy & Repeatability : ± 2% Of Reading For All Gases 7.05 Drift : Less Than 2% Of Full Scale Per Month 7.06 Response Time ( T-90 ) : 20-30 Seconds To 90% Step Change 7.07 Ambient Temperature Range : 4 To 50°C 7.08 Power : 12V / 24V Dc Adaptor 7.09 Output Options : Rs 232 Interface For Data Logging 8.00 Sieve Shaker With Sieve 8.01 Heavy Duty ( Improved Model ) For 8 Inch Test Sieve 8.02 The Sieve Shaker Is Durable Constructed And Is Run By ¼ H.P. Electric Motor 220 Volts A.C. Through Reduction Gear. 8.03 Designed To Carry Upto 6 / 7 Test Sieve Of 200Mm Dia ( 8 Inch ) With One Set Lid & Pan. 8.04 It Produces Circular And Hammering Motion Is Given At Top. 8.05 It Reproduce Circular ( Revolution Approx.: 280 To 320 R.P.M And Tapping Approx.: 140 To 160 R.P.M. 8.06 No Foundation Required. 8.07 7 Nos. Of Test Sieve ( Dia 8 Inch ) Made-Up Of Brass With Different Sizes Such As 106 Μm, 150 Μm, 212 Μm, 250 Μm, 300 Μm, 500 Μm, 850Μm. 8.09 One Set Lid And Pan With Above Specification. 9.00 Moisture Analyser 9.01 Max. Capacity : 50 G 9.02 Readability ( Weight ) : 0.1 Mg 9.03 Readability Moisture : 0.0001% 9.04 Repeatability ( Sample 2G ) ( Sd ) : 0.05% 9.05 Repeatability ( Sample 10G ) ( Sd ) : 0.02% 9.06 Units Of Measurements : %M, %D, %R ( Ratio ) , Gm / Lt, %M Atro, %D Atro 9.07 Statistics : Method Wise For Each Individual 40 Methods Or Batch Wise For Each Individual 100 Batches For Last 999 Results 9.08 Technology : Infra Red Halogen 9.09 Temperature Range : Max. To 175°C ( Optional To 250ºc ) 9.10 Temperature Increment : Interval 1ºc 9.11 Heating Profile : Standard, Gentle, Rapid, Steps, High Temperature 9.12 Switch Off Criteria : Auto, Manual 9.13 Auto Method Development : Intelligent 9.14 Method Memory : 40 And Batch Memory : 100 9.15 Method Designation : Alpha Numeric 9.16 Serial Number : Yes 9.17 Compile : Yes ( Method Linking ) 9.18 Operating Temperature : 15ºc To 35ºc 9.19 Display : Graphical Lcd Display With Led Backlite 10.00 Filter Vacuum Pump 10.01 Wetted Parts 304 Stainless Steel, Free Air Capacity ( Lpm ) ≥28 Max Flow Rate ( Cfm ) ≥ 0.99 Max Flow Rate ( Litters / Min ) ≥28 Max Pressure ( Psi ) ≥ 60 Max Pressure ( Bar ) ≥4.14 Max Vacuum ( Mbar ) ≥ 500 Noise Level ( Db ) ≥ 68 Port Size ¼ Npt ( F ) 3 / 4 Hose Barb On Gauges Noise Level : 50.00 Db 10.02 Filtration Unit 10.03 Material Type: Glass Diameter: 50Mm Capacity: Upper Chamber-500 Ml, 1000Ml, Lower Chamber-500Ml Sintered Crucible Nylon 66 Membrane & Filter, Filterpaper Nontoxic, Unbreakable Polysulfone Funnel Is Used In Microbial And Particulate Analysis. Funnels Do Not Leak After Repeated Autoclaving Removal Membrane Support Plate Is Designed To Provide Maximum Flow Rate And Through Put. Filtration Assembly Made Of Borosilicate Glass With Fritted Glass Filter Base The Base Design Has An Integral Vacuum Connection Located Above The Filtrate Drip To Prevent Contamination Of The Vacuum Line From Droplets The Filtration Base Has A Silicon Stopper, Anodized Aluminum Spring Clamp Facilitates Analysis Of Particulate Or Biological Contamination Of Vacuum Filtering Liquid The Scaled Funnels Simplify Dosing And Analysis 11.00 Lambda 365 Double Beam Uv Spectrophotometer Compatible Accessories Kit 11.01 50 Mm Trans / Reflect Sphere High Sens Used For Measuring The Diffuse Reflectance ( Sce ) , Total Transmittance, Diffuse Transmittance And Performing Color Analysis. It Has A Spectral Range Of 230-1100 Nm ( Uv And Visible ) . Its Port Size Is 10.00 Mm And The Spectral Bandwidth Is 20Nm. 11.02 Powder Sampling Kit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 9
Odisha View Result →
12.
Housing Urban and Rular Development #10578094 Price Bid
Tender For Providing Bore Well At Radha Nagar In Kumaramangalam Parangipettai Block In Cuddalore District.; 1 Geo Phyesical Survey Cherge For Fieldsurvey 2 Drillingand Errection Of 150 Mm Dia Bore Wellsedimentary Rock Using Rotary Rigup To0-60M Depth From G L 3 From 60M To 90Mbellow G L 4 From 90M To 120Mbellow G L 5 From 120M To 150M Bellow G L 6 From 150M To 180 M Bellow G L 7 From 180M To 210 M Bellow G L 8 From 210 M Upto 240M Bellow G L 9 Reaming Cherge Use Reverse Rottaryrig150mm -300Mm Up To0-60M Depth From G L 10 From 60M To 90Mbellow G L 11 From 90M To 120Mbellow G L 12 From 120M To 150M Bellow G L 13 From 150M To 180 M Bellow G L 14 From 180M To 210 M Bellow G L 15 From 210 M Upto 240M Bellow G L 16 Reaming 300 Mm Dia Pilot Bore To 400Mm / 450Mm Dia Bore As Directed By The Twad Board Officer. Upto 60 M Depth Ending Below Ground Level 17 From 60 M Depth And Upto 90 M Depth Ending Below Ground Level 18 From 90 M Upto 120 M Depth Ending Below Ground Level 19 From 120 M Upto 150 M Depth Ending Below Ground Level 20 From 150 M Upto 180 M Depth Ending Below Ground Level 21 From 180 M Upto 210 M Depth Ending Below Ground Level 22 From 210 M Upto 240M Bellow G L 23 Electrical Logging Arrangement 24 Supply Of 200Mm Od D W Cp V C Pipe Of 6Ksc For Plain Mediumd Wcasing Pipe ( 1797 D / F 12% Gst ) 25 Supply Of 200Mm Od D W Cp V C Pipe Of 6Ksc For Slottedmedium Casing Pipe C M ( 2314 D / F 12% Gst ) 26 Supply Of 200Mm Od P V C Pipe Bottam Dummyof 6Ksc ( End Cap ) 27 Supply Of 200 Mm Od P V C Pipe Top Coverof 6Ksc ( Coupler ) 28 Labour Charge For Errection Pipe P V C Pipe Of 6Ksc 29 Charge For Developing The Bore Well Use 600Cfm Air Compressor 30 Towards Cost Of Water Sampling 31 Supply Delivery And Erection Of The Submersible Pump Setduty 75X225 Lpm 7.50 H P 32 Supply Delivery And Erectionpannel Board Dol Starter5.00 Hp-7.50Hp 33 18Mmmain Wireing Board 34 Earth Pipe 35 4Sq Mm Flat Sub Cable 36 Wooden Board 2X4 37 Labour Charge For Errection Submersible Pump Set And Accessories 38 50Mm M S Clamp Set 39 Supply Anddelivery50mm Hdpe Pipe 40 Supply Anddelivery50mm Non Return Valve 41 Supply Anddelivery50mm Elbow 42 Gst Amount For Providing Service To Government Contract Works For The Above Construction Works. { Gst Amount Is The Total Gst Amount For Total Overall Quoted Amount Above This Row In Column Bb For All Works In This Package }
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
13.
Public Administrative Department #10574182 Price Bid
Supply Of Tools And Plants For Sub Division Supply Of Small Tools And Plants For Workshop Sub Division Vi , Non-Contact Type Tachometer Uses The Cpu Technique, Photo-Electrical Technique, And Junction Laser Technique For One Instrument Combined Photo Tachometer (Rpm & Rev).Rpm Test Range:2 To 99,9999 Rpm Count Range:1 To 99,9999 Accuracy:±0.05% ±1 Digit Resolution:0.1 Rpm Up To 1000Rpm Else 1 Rpm Sampling Time:0.5 Seconds (Over 120 Rpm) Detecting Distance:50Mm To 500Mm Equivalent To Make:- Metravimodel :- Nctm-1000 Non-Contact Tachometer , Small Angle Grinder 4 Disc Diameter :-100 Mm,No Load Speed:- 11,000 Rpm, Spindle Diameter M10, Power Input :- 800W Equivalent To Make Bosch Model Gws 800 Professional , Rotary Hammer 1-2 Kg Drilling Machine Drilling Diameter Concrete, Hammer Drill Bits 4-22 Mm, Max Drilling Diameter In (Metal/ Wood/ Concrete), Impact Energy - 2J, Impact Rate At Rated Speed 0-4800 Rpm. Rated Input Power :- 720W Equivalent To Make Bosch Model Rotary Hammer (1-2 Kg) Gbh 220 Professional , Ac/Dc Clamp Meter 3-4/5 Digits 6000 Counts, Lcd, Data Hold, T-Rms, 30Mm Jaw Size, Ac/Dc Voltage, Ac/Dc Current Up To 1000A, Resistance, Capacitance, Frequency And Temperture & Continuity Test Equivalent To Make Matravi Model Dt- 3690 Digital Trms Ac/Dc Clamp Meter , Digital Type Insulation Tester (Meggar) 3 1/2 Digits 1999 Counts, 0.00M Ohms - 11.0 G Ohms At 250V/ 500V/1000V, Accuracy +- 3%+5Dgt, With Dc Open Circuit Voltage, Short Circuit Current, Rated Test Current, Ac Voltage Test, Pi, Dar And Automatic Dischargeequivalent To Make Metravi Model Dit - 911 Digital Insulation Tester , Analog Insulation Tester (Meggar) Test Voltage : 1000V, Insulation Resistance Range : 0-2000 M Ega Ohms, Ac Voltage Test Facility Equivalent To Make Metravi Model It-1000 Analogue Insulation Tester , Impact Wrench (Cordless 18V) Max. Declared Torque 400 Nm, No Load Speed 0-2500 Rpm, Head Length 172 Mm, Square Drive 1/2 Inch, Battery Voltage : 18V Equivalent To Make Bosch Model Gds 18V-400 Professional Part No 06019K00f0 , Socket Sets - 12.7Mm (1/2) Square Drive Blow Moulding Box Including (Bihexagonal) Sockets Of 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 28, 29, 30 & 32 With Accessories 1753, 1763, 1773, 1733, 1715 Equivalent To Make: Taparia Model Bms14mxl Bihexagonal Socket Set (22 Sockets + 5 Accessories) , Single Phase Arc Welding Machine (Igbt) Rated Voltage : 220V±15%, 50/60Hzinput Capacity : 7.2 Kva; Input Current : 33 Ano Load Voltage : 45 V; Max Current : 220 Ausable Electrodes : 1 To 5 Mm; Generator Required : 5.8 Kwprotection Class : Ip21s , 15 Ton Hydralic Gear Puller Max Capacity: 15 Tons / 33069 Lbs, Jaws: 2 Or 3 Changeable,Axis Travel: 2 / 50 Mm, Min/Max Reach: 0 - 7 / 0 - 180 Mm,Min/Max Spread: 4 - 12 / 100 - 300 Mm Equivalent To Makevoltz Toolsmodel Vz-Hp-15Ton N Hydralic Pullers , Hydraulic Crimping Tools Crimping Range 16-300 Sqmm, Crimping Force : 16T, Crimping Type : Hexagon Crimping, Stroke 22Mm Including Dies Equivalent To Make Bracomodel Tyqk-300. , Ring Spanner Sets 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22, 21X23, 24X27, 25X28, 30X32 Equivalent To Make Taparia Product No :- 1812 , Double End Spanner Set 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22, 21X23, 24X27, 25X28, 30X32 Equivalent To Make Taparia Product No :- Dep 12 , Cantilever Tool Box 5 Compartment Type Having Size H X W X L (205 X 200 X 450)Equivalent To Make Taparia Model Ctb 1805 , Blower Input Power: 620W, No Load Speed 16000 Rpm, Volumatric Flow Rate 3.5 M3/Min Equivalent To Make Bosch Model Blower Gbl 620 Professional , Heat Gun Power Input 1800W, Max Temprature 60/350/550 C, Air Flow Rate 350/350/550 Ipm, Over Heat Protection Equivalent To Make Bosch Model Heat Gun Ghg 180 Professional , Y-Access Frp (Fiberglass) Single Sided Self-Supporting Ladder ( 6 Step 1.82 Metre) Non-Conductive Fiberglass Stiles Are Ideal For Working Around Electricity, High-Performance Holster Top, With Specially Designed Paint, Tool And Equipment Holders , Easy-To-Operate External Spreaders, Slip-Resistant Treads, Heavy Duty Bracing For Enhanced Bracing Strength To Protect Rail Against Damage, Approved To The Latest En131 Standard , Bucket Grease Pump 5 Kg With Trolley Equivalent To Taparia Bucket Grease Pump Model Bgpt 5.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Andaman And Nicobar Islands View Result →
14.
Public Administrative Department #10499862 Price Bid
Tender For Repair Maintenance Of Central Laboratory. Sub Work :- Supply Installation And Commissioning Of Scientific / Civil Engineering Lab Equipments. -Providing, Supplying, Commissioning And Demonstration Of Gi Frame Test Sieves 18” Dia Size:Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 2 50 Mm 3 25 Mm 4 31.5 Mm 5 16.0 Mm 6 12.5 Mm 7 10.0 Mm 8 6.3 Mm 9 Lid & Pan 10 Providing, Supplying, Commissioning And Demonstration Of Brass Frame Test Sieves 200Mm Dia. Size: 90 Mic. Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 11 Providing, Supplying, Commissioning And Demonstration Of Brass Frame Test Sieves 200Mm Dia. Size: 500 Mic Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 12 Providing, Supplying, Commissioning And Demonstration Of Shrinkage Bar Mould Single Gang Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 13 Providing, Supplying, Commissioning And Demonstration Of Le Chatelier Mould, ( Set Of 6Pc ) Standards:Is 269, 712, 5514, 1727 , 2645, 6932 ( Part Ix ) Bs 6463Specification: It Consists Of A Small Split Cylinder Forming A Mould. On Either Side Of The Split Cylinder. Two Parallel Indicating Arms With Pointed Ends Are Attached. Supplied Complete With Two Glass Plates And A Lead Weight. Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 14 Providing, Supplying, Commissioning And Demonstration Of Le Chatelier Water Bath Double Walled Inner Chamber In Stainless Steel Outer Chamber In Mild Steel Temperature Range Ambient To 100°C Controlled By Capillary Thermostat. Accuracy ± 1°C Operated On 230V A.C. Single Phase. These Baths Are Suitable For Washing Marshall Specimen. Lid Is Made Up Of Stainless Steel With A Hole For Glass Thermometer To Penetrate. Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 15 Providing, Supplying, Commissioning And Demonstration Of Vicat Needle Apparatus With Dashpot With Mtcspecification:The Apparatus Consists Of A Metallic Frame Bearing A Freely Movable And With A Cap At Top, One Vicat Mould And Glass Base Plate And One Set Of Needles One Each Initial Needle, Final Needle And Consistency Plunger. It Comes With A Dashpot Which Facilities Gentle Lowering Of The Needles. Accessories : Mild Steel Base Plate 5 Inches X 5 Inches. Fulcrum Mould , Brass , 80 Mm I.D. Base Dia X 70 Mm I.D. Top Dia , 40 Mm Height. Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 16 Providing, Supplying, Commissioning And Demonstration Of Specific Gravity And Water Absorption Of Aggregates Model With Nablcalibration Certificate Standards: Is 2386 ( Part Iii ) & Bs 812Specification: The Buoyancy Balance System Consists Of A Rigid Support Frame, Incorporating A Water Tank Mounted On A Platform. A Mechanical Lifting Device Is Used To Raise The Water Tank Through The Frame Height Immersing The Specimen Suspended Below The Balance. The Balance Supplied May Also Be Used As A Standard Weighing Device, Thus Providing A Versatile And Comprehensive Weighing System In The Laboratoryspecification:The Outfit Comprises Of• Electronic Balance, Capacity 15 Kg. Least Count 0.5Gm, Provision Is Made In This Balance To Suspend Density Basket Under Material Pan. This Balance Is Mounted On An Angle Iron Frame Stand. 1 No• Density Basket. 1 No• Air Tight Container To Suspend Density Basket. 1 No• Gi Tray Of Area Not Less Than 650 Cm Sq. 1 No.• Absorbent Cloths 75Cm X 45Cm. 2 Nos. Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 17 Providing, Supplying, Commissioning And Demonstration Oflos Angeles Abrasion Testing Machine With Nablcalibration Certificate Standards: Is 2386 ( Part Iv ) Astm C 131, Aashto T-96Specification:The Machine Consists Of A Hollow Cylinder Mounted Horizontally On A Study Frame On Ball Bearings. There Is An Opening Which Can Be Closed With A Dust Tight Cover To Facilitate Charging And Discharging The Drum With The Material Under Test. A Detachable Shelf Which Extends Throughout The Inside Length Of The Drum Which Catches The Abrasive Charge And Does Not Allow It To Fall On The Cover. The Drum Is Rotated By An Electric Motor Through A Heavy Reduction Gear At A Speed Of 30-33 R.P.M. A Revolution Counter Is Fitted To The Frame. A Tray Is Supplied For Collection Of The Material At The End Of The Test. Complete With Abrasive Charge Consisting Of A Set Of Twelve Hardened Steel Balls, Approximately 48Mm Dia. Suitable For Operation On 440 V, 3 Phase, 50 Cycles, A.C. Supply Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 18 Providing, Supplying, Commissioning And Demonstration Of Electrical Oven Doublewall For Soil Inside Chamber In Ss Outside Mild Steel With Digital Temperaturecontroller Along Withblower With Circulation The Airambient Temperature With Two Tray 2500Csize: 18”X18”X18” With Nablcalibrationmake Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 19 Providing, Supplying, Commissioning And Demonstration Of Digital Double Door Oven Zi Model No : 9014225 Liter Cap. , Temp. Amb. To 250 Degree C Or Equivallent Specificationthis Range Of Ovens Is Designed For Drying Large Quantities Of Soil And Aggregate Samples And Maintains Temperature In Accordance With Most B.S. And Astm Requirements.The 225 Lts. Are Economy Models Constructed With Coated Mild Steel Exterior And Stainless Steel Coated Interior Chamber, Which Is Both Durable And Corrosion Resistant.These Units Meet The Requirements Of Bs 1377 And Are Ideal For On-Site Laboratories And General Soil And Aggregate Testing. Options And Accessories:• Dial Thermometer With Collar Fixing For Door• Heavy Duty Shelves ( On Request At An Extra Price ) • Color Of The Oven ( Only On Qty. Greater Than 3 Units ) Specifications:• The Larger Soil Drying Ovens Are Constructed With Mild Steel And Powder Coated Exterior And Stainless Steel Coated Chamber Which Is Both Durable And Corrosion Resistant.• All Sizes Of Oven Are Fitted With A ( Pid Controller ) Having A Microprocessor Digital Control As Standard.• All Units Comes With Mcb Tripping Device In Cases Of Any Short Circuit, Overloading Of Voltage And Low Voltage Cut Off. Wiring Of Heaters Can Be Connected / Dis-Connected Removing The Side Panels Of The Oven. 20 • Caster Wheels With Locking Arrangement Are Fitted Below The Oven For Easy Movability Of The Unit From One Place To Another. Door Locking Arrangement Is Very Easy Convenient With Lever To Lock Unlock With Half Turn Lever• A Safety Thermostat Is Fitted Inside The Oven For Safety Purpose. Incase Of The Failure Of The Pid Controller The Safety Thermostat Will Serve As The Temperature Controller.• A High / Low Switch Is Fitted On The Panel Of The Oven For Heaters. This Feature Allows Heaters To Burn All Together Or Half Of Them.• The Least Count Division For Viewing / Setting The Temperature Is 0.1º C Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 21 Providing, Supplying, Commissioning And Demonstration Of Standard Compaction Test ( Is ) Standards: Is 2720 ( Part-Vii ) Specification: Instrument Consists The Apparatus Consists One Each Of Compaction Mould Mild Steel, 100 Mm I.D. X 127.3Mm Height X 1000 Cc Volume, Complete With Collar And Base Plate.Compaction Rammer Is 2.6 Kgs In Weight X 310Mm Controlledfall Make Aimil / Lawrence & Mayo / Lynx / Enkay / Zeal International Enterprises. 22 Providing, Supplying, Commissioning And Demonstration Of Heavy Compaction Test ( Is ) Standards: Is 2720 ( Part-Viii Specification:Instrument Consists One Each Of Compaction Mould Mild Steel 150 Mm I.D. X 127.3Mm Height Volume 225°C. Complete With Collar And Base Plate. Compaction Rammer Is 4.89 Kgs. In Weight X 450 Mm Controlled Fall. Note : Instead Of Steel Moulds, Gunmetal Mould Are Also Available Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 23 Providing, Supplying, Commissioning And Demonstration Of Sand Pouring Cylinder – Is, Standards: Is 2720 ( Part Xxviii ) 1966Specification: This Apparatus Is Used For The In Place Determination Of The Dry Density Of Compact, Line And Medium Grained Soils And For Layers Not Exceeding 500Mm Thickness. The Complete Apparatus Consists One Each Of Small Sand Pouring Cylinder, 3 Litre Capacity Fitted With Conical Funnel And Shutter. Cylindercalibrating Container, Internal Dia 100Mm And 150Mm Height.Accessories:Metal Tray, 300Mm Square And 40Mm Deep With Hole Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 24 Providing, Supplying, Commissioning And Demonstration Of Liquid Limit Apparatus Hand Operated With Mtcspecification:Casagrande Method In Mechanical Form Is Known As Liquid Limit Method And Has Been In Use For Soil Mechanics For A Number Of Decades. The Liquid Limit Data Of Soils Is Useful To Correlate Mechanical Properties Of Soil, Such As Compressibility And Lower Shear Strength. Liquid Limit Is The Water Content At Which Soil Passes From Zero Strength To An Infinite Strength, Hence The True Value Of Liquid Limit Cannot Be Determined. For Determination Purpose Liquid Limit Is That Water Content At Which A Part Of Soil, Cut By A Groove Of Standard Dimensions, Will Flow Together For A Distance Of 1.25Cm Under An Impact Of 25 Blows In A Standard Liquid Limit Apparatus. The Soil At The Water Content Has Some Strength Which Is About0.17N / Cm. Sq. ( 17Gms / Sq.Cm. ) . At This Water Content Soil Just Passes From Liquid State To Plastic State.It Consists On A Brass Cup Held On An Adjustable Bracket.The Cup Can Be Adjusted For A Fall Of 1 Cm And Can Be Raised An Dropped On A Rubber Base Of Standard Hardness By Cam Action. Complete With One Casagrande Grooving Tool, One Astm Grooving Tool And A Height Gauge Block. A Counter To Register The Number Of Blows.Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 25 Providing, Supplying, Commissioning And Demonstration Of Aggregate Impact Test Machine With Counter, Mould And Steel Rod 16 Mm Dia. 26 Providing, Supplying, Commissioning And Demonstration Of Plastic Limit Set Model Is 2720 ( Part-Vii ) Astmd-42, Bs 1377 Aashto T 90Moisture Contents At Which Soil Has Smallest Plasticity Is Called Limit. For Determination Purpose Plastic Limit Is Defined As The Water Content At Which A Soil Will Just Begin To Crumble When Rolled In To A Thread Of 3Mm Dia.Specification:The Complete Set Consists Of One Each :1. Glass Plate 20Cm X 15Cm Having Round Ends2. Brass Or Stainless Steel Rod 3Mm Dia X 150Mm Long3. Flexible Spatula 15 Cm4. Set Of 6 Moisture Containers5. Porcelain Basin 150Mm Dia6. Plastic Wash Bottle 500Ml Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 27 Providing, Supplying, Commissioning And Demonstration Of Digital California Bearing Ratio Test Apparatus ( Cbr ) Standards: Is 9669, Is: 2720 ( Part Xvi ) With Nablcalibration Certificate The Lab Test Is Designed For Performing Laboratory Evaluation Of The Cbr Value Of Highway Sub Bases And Sub Grade And For The Determination Of Strength Of Cohesive Materials Which Have Maximum Particle Sizes Less Than 19 Mm ( 3 / 4” ) . The Machine Is Designed To Be Mounted On A Suitable Bench And Comprises Of A Robust And Compact Two Column Frame With Adjustable Upper Cross Beam. The Frame Is 50 Kn Capacity. Three Test Speeds Are Provided 1.25 Mm / Min, 1.50 Mm / Min & 2.5 Mm / Min Tests. This Main Feature Allows The User To Perform Tests. Laboratory California Bearing Ratio Apparatus With Software & Pc Interface. Zi 3066A Three Speed Load Frame, 50Kn ( 5000 Kgf ) Capacityzi 3066B Mould 150Mm Id X 175Mm Highzi 3066C Perforated Base Plate For Zi3074- 2 Mouldzi 3066D Extension Collar, 150Mm Id X 50Mm Highzi 3066E Penetration Piston, 50Mm Face Diazi 3066F Adjustable Bracket, For Penetration Dial Gaugezi 3066G Circular Metal Spacer Disc. With Detachable Handle 148 Mm Dia X 47.7 Mm High Time.Zi 3066H Annular Metal Weight, 2.5Kg, 147Mm Dia With 53 Mm Dia Central Hole 28 Zi 3066I Perforated Metal Weight 2.5 Kg. 147Mm Dia, With 53Mm Dia Softzi 3066J Perforated Plate, 148Mm Dia, With Adjustable Stem And Lock Nutzi 3066K Metal Tripod For Dial Gaugezi 3066L Cutting Collarzi 3066O S Type Load Cellcapacity 50 Knzi 3066P Lvdt, 25 Mm Travel, 0.01Mm Least Count Optional Extras:Salient Features:-• No Need Of Separate Observation On Dial Gauge And Proving Ring.• Facility To Readout Rate Of Loading In Mm / Minute.• Tare System To Nullify Initial Load The Digital Lcd Display Will Retain The Peak Value Until It Is Cleared.• Flow Value And Load On A Single Screen.• Flow Value With A Least Count Of 0.01 Mm With Accuracy Of 1%.• Load Value With A Least Count Of 0.1 Kg / 0.001 Kn With Accuracy Of 1%.• Back Light Facility To Observe The Readings Even In The Dark.• Two Line Readout Showing Load, Flow, And Speed.• Software Interface To Pc And Plot Live Graph. Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises 29 Providing, Supplying, Commissioning And Demonstration Of Shrinkage Limit Set Standards:Is 2720 ( Part-V ) Astm D 427, Bs 1377, Aashto T 92.Specification:Shrinkage Limit Is The Maximum Water Content At Which A Reduction In Water Content Does Not Cause An Appreciable Reduction In Volume Of The Soil Mass. At Shrinkage Limit, On Further Reduction In Water, Air Enters In To The Voids Of Soils And Thus Keeps The Volume Constant.The Apparatus Can Be Used To Determine Shrinkage Limit And To Calculate Other Shrinkage Ratio, Shrinkage Index And Volumetric Shrinkageset Consists Of One Each:1.Porcelain Evaporating Dish2.Shrinkage Dish3.Glass Cup4.Perspex Plate With Three Metal Prongs5.Flexible Spatula 100Mm6.Glass Cylinder7.25Ml X 1Ml, Supplied Without Mercury8.Plastic Wash Bottle 500Mlmake Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 30 Providing, Supplying, Commissioning And Demonstration Of Enamel Tray Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 31 Enamel Tray 10 X12” 32 Enamel Tray 12” X18” 33 Enamel Tray 18” X24” 34 Providing, Supplying, Commissioning And Demonstration Of Triaxial Test Apparatus Electrical With 10 Kn Load Cell And 25 Mm X 0.01 Lvdt , 2 Channel Data Acquisition System And Software Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. ( Rates Included Sub Head A To D ) 35 Providing, Supplying, Commissioning And Demonstration Of Load Frame, Motorised, 3 Speeds With Dial Gauge Features: · Two Pillar Type ·Detachable Frame ·Enclosed Motor And Gear System · Jewel Lamps Indicating Direction Of Motion · Operational Ease · Useful For Triaxial And Cbr Tests The Load Frame Consists Of A Cabinet Which Houses The Gear System And Motor With Sturdy Angle Iron Frame. The Loading Is Done Through The Bottom Loading Platen, Which Is Carried On A Lead Screw, Which Advances Upwards. The Top Load Bracket, Which Slides Over Two Upright Pillars, Can Be Positioned At Any Desired Height And Locked. It Carries A Screw Adapter For Standard Proving Rings And Load Cells. The Loading Part Of The Unit Is Detachable From The Main Unit For Ease Of Transport And To Avoid Damage To The Tension Rods. Rates Of Strain: 6 Fixed Speeds 1.25, 1.50, 2.50 Mm / Min. Suitable For Operation On 230 V, 50 Hz, Single Phase, Ac Supply Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 36 Providing, Supplying, Commissioning And Demonstration Of Lateral Pressure Assembly 10Kg / Cm² It Is Designed For Application Of Cell Pressure Upto 10Kg / Cm2 On A Triaxial Specimen In The Triaxial Cell. The Unit Is Mostly Used In Routine Tests Which Last For About 10 To 15 Minutes Wherein The Variations Of Cell Pressure Can Be Tolerated.Specification :The Apparatus Consists Of A Pressure Chamber Which Has A Flanged Top Cap Fitted With A 10 Kg / Cm2. Pressure Gauge And A Valve For Pumping In Air. Water Inlet And Drain Cock Are Fitted To The Chamber. The Foot Pump Supplied Easily Develops A Pressure Of 10 Kg / Cm2 Complete With Connecting Pressure Hose.Note: Also Available 20Kg / Cm2 Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 37 Providing, Supplying, Commissioning And Demonstration Of Triaxial Cell For 38 Mm Dia The Accessories & Foot Pump Specification:The Cell Is Useful For Testing 38Mm Dia X 76Mm High Soil Specimen. Transparent Perspex Chamber With Anvil And Loading Plunger, The Cell Is Easily Opened By Releasing Four Nuts Of The Tie Rods. It Is Leak Proof Up To 10Kg / Cm.Sq. Fluid Pressure. An Oil Plug Which Can Also Be Used As An Air Vent Is Provided For Introducing A Thin Layer Of Oil Over Water. This Provides Effective Sealing At The Plunger For Long Duration Tests. The Cell Is Fitted With Four Sleeve Packed Valves Of No Volume Change Type On The Base. These Valves Are Used For Cell Pressure, Pore Water Pressure, Drainage Or Back Pressure. The Loading Plunger Of The Cell Has Dial Gauge Rest.•Loading Pad Made Of Perspex For 38Mm Dia Specimens.•Pair Of Plain Discs Made Of Perspex 38Mm Dia 6Mm Thick.•Pair Of Porous Stones 38Mm Dia Specimen.•Split Sand Former For 38Mm Dia Specimen.•Sheath Stretcher For 38Mm Dia Specimen.•One Dozen Rubber Sheaths For 38Mm Dia Samples.•For Synthetic Rubber ‘O’ Rings For 38Mm Dia Specimen.•One Plastic Drainage Tube. Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 38 Providing, Supplying, Commissioning And Demonstration Of Pore Pressure Apparatus 10 Kg / Cm² Specification: The Apparatus Consists Of A Panel For Wall Mounting On Which Are Fitted 1.0 To 10Kgmanom / Cm Sq X 0.1Kg Cm. Sq. A Pressure Gauge, Bourdon Tube Type 15 Cm Diameter: Glass U-Tube Manometer For Measuring Low Positive Pore Pressures Negative Pore Measures And Checking Zero Error Of Pressure Gauge. It Is Provided With A Mercury Trap ( Mercury Supplied At Extra Cost. ) Null Indicator Made Out Of Clear Transparent Perspex With Mercury Trap And Cursor To Indicate The Mercury Level. Burette: 50Ml Burette For Measuring The Volume Change In The Soil Specimen. Pressure Pump Fitted With Four Sleeve Packed Valves, Operated By Means Of A Hand Wheel On The End Of The Piston Rod Which Is Threaded Through The Pump Cap And Gives A Smooth, Fine Adjustment Of Pressure. Copper Coil And Water Reservoir Is Fitted On Board With Complete Stand Assembly. The Unit Is Tested Against Leaks Up To 10Kg / Cm Sq.Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 39 Providing, Supplying, Commissioning And Demonstration Of Ring & Ball Apparatus ( Semi Automatic ) Model No. Zi 4003Ref. Standards - Is:1205, Astm D 36, E 28, Ip 198, Ip 58, Aashto T53, Bs:2000, En 1427 With Nablcalibration Certificate For Determining The Temperature At Which A Sample Of Bituminous Material Loaded By A 9.5 Mm Dia Steel Ball, Drops A Specified Distance When Heated Under Specified Conditions.Ring And Ball Apparatusthe New Design Of Ring And Ball Apparatus Is Compact User Friendly And Has Better Aesthetics. It Has Magnetic Stirrer With Heating Facility And Digital Display Of Temperature, The Heating Can Be Adjusted Through Knob.Suitable For Operation On 220 V, 50 Hz, Single Phase, Ac Supply. Each Unit Is Supplied With A Bath Of Heat Resistant Glass And Thefollowing:Zi 4003-A Tapered Rings 2 Nos.Zi 4003-B Ball Centering Guide 2 Nos.Zi 4003-C Steel Balls Of 9.5 Mm Dia 2 Nos.Zi 4003-D Ring Holder 1 No.Zi 4003-E Electric Heater ( Hot Plate ) 1 Nos. Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 40 Providing, Supplying, Commissioning And Demonstration Of Marshall Stability Test Apapratus Model No : Zi – 4022 Or Equivalentastm : D 1559 T-62 Bs 598-107 With Nablcalibration Certificate Marshall Apparatus Consists Of:• Robust Construction• 50Kn Capacity• Rate Of Travel 50.8Mm / Min• Safety Cut-Off Switchit Consists Of Body Housing, A Geared Screw Jack And Motor Drive Mechanism Suitable For Operation On 230 V, 50Hz, Single Phase, A.C. Supply.Zi 4022-A Marshall Load Frame 1 No.Zi 4022-B Breaking Head Stability Mould, 100Mm Mm With A Dial Gauge ( Having 25Mm Travel And 0.01Mmleast Count ) , For Flow Measurement 1 No.Zi 4022-C Compaction Mould, Steel Cylindrical 100Mm3 Nos.Zi 4022-D Base Plate 3 Nos.Zi 4022-E Extension Collar 3 Nos.Zi 4022-F Compaction Pedestal, 100Mmmanual Operation, Comprising A Steel Plate Capped On A Wooden Post. A Mould Clamp Is Fitted To The Top Of The Plate . 1 No.Zi 4022-G Compaction Hammer, 100Mmsatisfies Bs 598. The Hammer Has A 4535 G Sliding Weight With A Free Fall Of 457 Mm 2 Nos.Zi 4022-H Load Transfer Bar 1 No.Zi 4022-I Paper Discs, Non Absorbent, 11 Cm Diameter Pack Of 100 No. 1 Pkt.Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 41 Providing, Supplying, Commissioning And Demonstration Of Marshall Mould Complete With Collar & Base Plate 100Mm Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 42 Providing, Supplying, Commissioning And Demonstration Of Centrifuge Extractor Motorised, Zi 4014 Or Equivalentstandards:Astm D2172 Aashto T-58, T-164Specification:Centrifuge Extractor, Electrical Operation, Capacity 1500G, With A Dimmer Stat For Speed Control From 2, 400 To 3, 600 Rpm. Suitable For Operation On 230 V, 50 Hz, Single Phase, A.C. Supply Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 43 Providing, Supplying, Commissioning And Demonstration Of Ductility Testing Apparatusdigital Aimil Type Model No. Zi – 4025Or Equivalent With Nabl Calibration Certificatestandards:Is 1208-1058, Astm D 113, Ip32, 55, Aashto T 51Specification:Designed To Test Three Specimens Simultaneously. The Machine Consists Of A Carriage Moving Over A Lead Screw. An Electric Motor Driven Reduction Gear Unit Ensures Smooth Constant Speed And Continuous Operation. The Entire Assembly Is Mounted With A Stainless Steel Lined Water Bath Completely Encased In Metal Bound Hardwood. It Is Equipped With An Electric Pump Circulator And Heater. The Temperature Is Controlled Thermostatically. Two Rates Of Travel I.E. 50 Mm / Min And 10 Mm / Min Are Provided. Suitable For Operation On 230 V, 50 Hz, Single Phase, A.C. Supply. Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 44 Providing, Supplying, Commissioning And Demonstration Of Standard Digital Penetrometer ( Made In Italy ) Used To Determine The Consistency Of A Bituminous Sample Under Fixed Conditions Of Load, Time And Temperature. The Penetration Is Expressed In Distance Of Tenths Of Millimeters Vertically Penetrated By A Standard Needle. The Standard Penetrometer Is Ruggedly Constructed, With An Aluminium Base Table With Levelling Screws, Platedvertical Rod, “Micrometric Vertical Adjustment Device”.The Slider Is Brass Made With Free Fall.The Digital Readout Of The Penetration Values Has Readings In Mm And Inch, With 0.01 Mm Resolution, Lcd 5 Digits Display, With Zero Set In Any Position.Power: 1.5V Battery.The Penetrometer Is Supplied With Stop And Release Push Button, Automatic Zero Set, Micrometer Adjustment, Set Of Weights 50 And 100 G Penetration Needle, Brass Sample Cups Diameter 55X35 Mm And 70X45 Mm.Dimensions: 220X170x410 Mmweight: 11 Kg Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 45 Providing, Supplying, Commissioning And Demonstration Of Digital Penetrometer Zi 4008 Or Equvalentstandards: Is 310, 1203, 1448, Ip 60, 49, 50 Astm D5, 217, D637, Bs 2000-49Specification: Same As Zi 4007 But The Unit Is Compact With Timer To Control Duration Of Penetration. The Instrument Is Provided With Lead Screw Gear Arrangement, Leveling Screws, Spirit Level And A Digital Preset Timer Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 46 Providing, Supplying, Commissioning And Demonstration Ofstripping Value Apparatus, Zi 4012 Or Equivalent Make With Standards: Specification:A Circular Tray Rotates In A Vertical Plane At A Rate Of Approximately 100 R.P.M. By An Electrical Geared Motor. 4 Bottles Of Approximately 400 Cc Are Mounted On This Circular Tray At An Angle Of 900. To Each Other With Their Mouth Towards Center Of The Tray. A Time Switch Is Provided. Suitable For Operation On 230 V A.C. Single Phase.Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 47 Providing, Supplying, Commissioning And Demonstration Of Core Cutting / Core Drilling Machine ( Petrol ) Model Nozi 6001 With 100Mm Core Bit Or Equivqlent Makespecification:Suitable To Cut / Drill Cores Of Concrete, Rocks, Stones, Tiles Or The Similar Materials. The Machine Is Suitable For Core Samples Of Size Upto 150Mm Diameter With The Help Of Thin Walled Diamond Bits Which Are At Extra Cost. The Machine Has Sturdy Base With Pillar Support In Which Rack And Pinion Is Provided For Adjustment In Height And Penetration Assembly. The Leveling Screws Are Provided At The Base. For Gripping The Sample In Position Suitable Grips Are Provided. A Suitable Petrol Engine Is Fitted In The Machine With Cooling Arrangement With Water. The Base Frame Is Also Fitted With Wheels For Ease Of Transportation.Dimension Approx, Are As Under:Height: 1300 Mmbase: 625 X 900 Mmhead Travel On Rack: 500Mmdrill Speeds : 900 R.P.M. For Soft Samples And 350 R.P.M. For Hard Sampleswater Swivel : Built In The Machines.Accessories: ( 1 ) Thin Wall Diamond Bits. ( 2 ) Core Barrel. ( 3 ) Petrol Engine Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 48 Providing & Supplying Core Bit 4 Made In Germany : Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 49 Providing & Supplying Core Bit 6 Made In Germany : Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 50 Providing, Supplying, Commissioning And Demonstration Of Absolute Viscometer Bath Zi 4017 Or Equivalentspecification:This Bath Is Designed And Developed Under The Strict Supervision Of Our Experienced Professionals In Accordance With The International Quality Standards. Our Offered Bath Is Thoroughly Checked On Various Parametersto Ensure Zero-Defect. This Bath Is Widely Used In National Laboratories And Pharmaceutical Industries.Features:•Intelligent Signal Sampling For Accurate Data Measuring And Parameter Reading•Accurate Viscometer For Improving Experimental Efficiency•High Precision Digital Display•Ideal For Controlling The Temperature Accuracy•Durable Glass Bath For Optimum Heat Preservation•Desktop Based All-In-One Design For Easy Operations And Portability•Electric Stirrer For Ensuring Uniform Temperature Of Bath•Easy Cleaning And Drying Of Viscometer Tubesother Information:The Accompanying Absolute Kinematic Viscosity Bath Are Utilized To Measure Supreme Thickness Of Consistency Reviewed Clearing Bitumen ( Is:73:2006 ) At 160°C As Per Is:1206 ( Part Ii ) ( Like Astm D 2171 ) , Which Utilizes A Vacuum Slender Viscometer. Complete Absolute Viscosity Testing Equipment Adjusting To Is: 1206 ( Part Ii ) Method For Testing Tar And Bitumen Materials: 51 Determination Of Absolute Viscosity With The Accompanying Segments:Consistent Temperature Bath – A Suitable Shower For Drenching Of No Less Than 2 Vacuum Fine Viscometer Tubes With A Computerized Temperature Controller. The Precision Of The Temperature In The Shower Will Be + 0.1Oc All Through The Showermake Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 52 Providing, Supplying, Viscosity Tube For Absolute Viscometer Bath With Calibration Certificate Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 53 Providing, Supplying, Commissioning And Demonstration Of Flash Point ( Closed ) Pensky-Martens Apparatusspecification:For Determining The Flash Point Of Fuels Oil And Lubricating Oil, Bitumen Other Than Cutback Bitumen And Suspension Of Solids In Liquids, Having A Flash Point Above 49ºc.Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 54 Providing, Supplying, Commissioning And Demonstration Of Standard Tar Viscometer Specification:For Determining The Viscosity Of Cut Back Bitumen And Road Oil. The Viscometer Consists Of A Chrome Plated Copper Bath, With A Drain Valve And A Central Tube To Receive The Test Cup And To Position The Stirrer, And Is Mounted On A Stand With Levelling Feet. Stirrer Has A Curved Shield And Is Provided With An Insulated Handle, Thermometer Socket And Swivel Support For The Valve Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 55 Providing, Supplying, Commissioning And Demonstration Of Temperature Controller With Nablcalibration Certificate Size : 16X12x10”Standards Specification:Double Walled Inner Chamber In Stainless Steel Outer Chamber In Mild Steel Temperature Range Ambient To 100° C Controlled By The Capillary Thermostat. Accuracy ± 2° C, Least Count ±0.1° C.& Fhp Motor Cum Stirrer. Operated On 230V A.C. Single Phase. Heaters Are Provided According To The Size Of The Chamber. A Control Panel In Which The Digital Controller, Switches For Mains, Fhp Stirrer, A Regulator For The Stirrer Is Fit Is By The Side. These Baths Are Suitable For Washing Marshall Specimen. The Lid Is Made Up Of Stainless Steel With A Hole For Glass Thermometer To Penetrate Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 56 Providing, Supplying, Commissioning And Demonstration Of Tile Abrasion Testing Machine Is 1237 This Is Used For Determination Of Resistance To Wear For Cement Concrete Flooring Tiles. Tiles Specimen Of Size 7.06 Cm X 7.06 Cm Is Pressed Face-Wise Under Specific Load On A Grinding Path And Abrasive Powder Is Evenly Spread On The Rotating Grinding Disc The Second Parallel Side Of The Tile Is Subjected To Wear For Similar Number Of Rotations. The Wear Of The Tile Is Measured On A Thickness Gauge Specifically Made For The Purpose. The Machine Consists Of A Disc Rotating At A Speed Of 30 R.P.M. In A Circular Tray. A Bracket Is Provided To Hold The Specimen. A Counter Balance Lever Loads The Specimen. Load Applied Is 30 Kgf. A Funnel Is Fitted To Evenly Spread Abrasive Powder On The Grinding Path. A Pre-Set Counter Automatically Stops The Machine After 22 Revolutions. This Counter Is Re-Adjustable. The Machine Works On 440 V A.C. Three Phase Electrical Supply. On Request Machine To Operate On 230 V A. C. Supply Can Also Be Suppliedmake Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 57 Providing, Supplying, Commissioning And Demonstration Of Hot Plate ( Rectangular ) Rectangular Hot Plate With Outer M.S. Sheet Body Duly Powder Coated Stove Painted To Work On 230 V Ac Supply. Useful For Continuous Heating Up To 300° C. Heavy Duty Cast Iron Top With Heat Resistant Paint. Hot Plate Size Rating 12 X 14 X 6Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 58 Providing, Supplying, Commissioning And Demonstration Of Digital Thermometer With Nablcalibration Certificate Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 59 Providing, Supplying, Commissioning And Demonstration Of Infrared Thermometer With Nablcalibration Certificate Make Aimil / Lawrence & Mayo / Lynx / En Kay / Zeal International Enterprises. 60 Providing, Supplying, Commissioning And Demonstration Of Electronic Balance Upto 600 Gm Capacity Accuracy 0.01 Gmdual Display Battery Cum Electrically Operated With Calibration Certificate. 61 Providing, Supplying, Commissioning And Demonstration Of Electronic Balance Upto 1000 Gm Capacity Accuracy 0.01 Gmdual Display Battery Cum Electrically Operated With Calibration Certificate. 62 Providing, Supplying, Commissioning And Demonstration Of Electronic Balance Upto 5 Kg Capacity Accuracy 0.1 Gm Dual Display Battery Cum Electrically Operated With Calibration Certificate. 63 Providing, Supplying, Commissioning And Demonstration Of Electronic Balance Upto 30 Kg Capacity Accuracy 2 Gm Dual Display Battery Cum Electrically Operated With Calibration Certificate . 64 Providing, Supplying, Commissioning And Demonstration Of Electronic Balance Upto 100 Kg Capacity Accuracy 10 Gm Dual Display Battery Cum Electrically Operated With Calibration Certificate. 65 Providing, Supplying, Zi 4014-A Filter Paper Discs, Set Of 25 66 Providing, Supplying, Commissioning And Demonstration Of Laboratory Cement Autoclave Zi 1016 Or Equivallentstandards:Is 4031-1968, Is 1624-1960 & Astm C 151, C 141Specification:The Autoclave Is Suitable For Conducting Accelerated Soundness Tests On Cements Or The Autoclave Expansion Test Requiring Constant Steam Pressure With The Correspondent Constant Pressure. It Consists Of A Stainless Steel Cylinder With A Welded Heat Insulated Metal Housing Attractively Finished. The Attached Control Unit Encloses A Sensitive Pressure Regulator And Pressure Gauge. Power Switches And Pilot Lights For Controlling The Electric Heating Units. Inside Chamber Dimensions 15.0 Cm Diameter X 40.5Cm Height Suitable For Operation On 230 V, 50 Hz Single Phase A. C. Supply. Supplied Complete With Test Bar Holder, Special Rack To Hold Specimens Above Water Level In The Autoclave And In A Vertical Position To Expose Them In The Same Manner. A Digital Pid Controller Is Fitted For Controlling The Desired Temperature. 67 Providing, Supplying, Auto Clave Mould 282 X25x25 Mm As Per Is Or Equviallent Make. 68 Providing, Supplying, Zi 2027A50 Mm Plastic Abs Cube Mould 69 Providing, Supplying, Zi 2027B70.6 Mm Plastic Abs Cube Mould 70 Providing, Supplying, Zi 2024B Cube Mould ( Cast Iron - For Mortar ) 50Mm, Three Gang As Per Is Or Equviallent Make. 71 Providing, Supplying, Zi 2024C Cube Mould ( Mild Steel - For Cement ) 70.6Mm, With Loose Base Plate As Per Is Or Equviallent Make. 72 Providing, Supplying, Commissioning And Demonstration Ofaccelerated Curing Tank With Cooling Arrangement Zi 2045B Or Equvallentstandards:Specification:Curing Tank Or Concrete Curing Tank Is Used For The Curing Of Concrete Samples For At Least 8 Hours. The Purpose Of Curing Is To Ensure That All Concrete Samples Are Similar With Regards To Quality And Strength.24 Hour Cycle From Time Of Mixing.Controlled 35° C Or 100° C ± 2° C Curing Temperature For Concrete.Controlled 27° C ± 2° C Curing Temperature For Grey Cement.This Curing Tank Has Been Designed To Accommodate 150Mm / 70.6Mm Cube Moulds And Upto 12 / 24Cube Mould Can Be Cured In One Go. The Tank Is Fully Insulated, Comes Complete With A Hinged Lid, Heater, Thermostat And Re-Circulated Pump. Provision Of Two Removable Racks Allows Free Circulation Of Water Around Each Mould. The Pump, Drain Valves And Electrical Equipment Are Housed In A Compartment Located At One End Of The Tank. The Tank Is Heated By An Immersion Heater Under Normal Conditions And Refrigeration System For Grey Cement The Temperature Is Controlled At 35° C Or 100° C ± 2° C / 27° C +2° C, Expect For The 15 Minutes After Immersion Of The Freshly Made Specimens. Accelerated Curing Tank With Cooling Arrangement Is Also Available. 73 Providing, Supplying, Commissioning Of Fridge 407L 3 Star Frost-Free Digital Inverter Double Door Refrigeratorconvertibleof Make Samsung / Lg / Whirlfool Etc 74 Carriage Of Materials From Chennai Port To Port Blair Central Lab ( As The Quottation Given By Zeal Internatiol Up To Chennai Port )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Andaman And Nicobar Islands View Result →
15.
Communications and Information Technology  #10457552 Price Bid
Supply Installation Testing Commissioning And Equipment For Gold Ornament Cluster Supply, Installation, Testing, Commissioning And Trail Run Of Machinery And Equipment For Gold Ornament Cluster Under Mse Cdp Scheme. , Gold Cluster Ornament , Supply And Installation Of Faceting And Milling Machine (Cnc Machine) For Bangles And Wedding Bands Double Head With Variable Speed Control, Computerizes Six Axis System. Specification: Number Of Head Horizontal & Vertical 02. Type Of Main Centre Universal 03. Number Of Axis (5+2) ‘X Longitude, ‘W D-Tilting, ‘Z Vertical For Depth, ‘R 360° Horizontal Rotary For Angular Position & Machining, ‘H Horizontal Spindle, ‘V Vertical Spindle, 04. Travel Of Axis ‘X Longitude 60 Mm, ? Rotating For Job - Continuous Rotary/Index, 2 To 400 Divisions, ‘W Tilting (Semi Rotary) Degree -40° To 90°, 05. Type Of Optional Accessories For Optimum Operation. Optional Accessories Can Be Fitted For Flat And Half Round Bangles And, Bands (Rings) 06 Milling Spindle Speed Horizontal (Servo Motor) Vertical (Hf Ac Built-In Motor With Pneumatic Tool Change Water Cooled Spindle). Min. 1000 Rpm To Max. 9000 Rpm, Min. 10,000 Rpm To Max. 60,000 Rpm ‘? Rotary,07. Spindle Motor Power Vertical, Horizontal, 1.5 Kw, 0.4 Kw,08. Electrical Supply 220V Ac / 50 Hz, 09. Total Required Electrical Load 3 Kva, 10. Air (Pneumatic) Supply Dry And Oil Free Air With 6 Bar / 87 Psi And 4 Cfm /120 Lpm Flow Rate, 11. Dimension (L X W X H) 94 X 97 X 156 Cm. 37 X 38 X 61 Inch.12 Floor Space Required (L X W X H) 155 X 161.5 X 156 Cm. 61 X 63.5 X 61 Inch,13 Net Weight With Standard Accessories 327 Kg Approx., 15 Shipping Dimension With Standard Accessories (L X W X H) Box-1 - 75 X 92 X 120 Cm. 29.5 X 36 X 47 Inch, Box-2 - 119 X 122 X 181 Cm. 47 X 48 X 71 Inch., Box-3 - 32 X 63 X 42 Cm. 12.5 X 25 X 16.5 Inch. To Include Additional Supporting Machine Tools And Materials. Fully Automatic And To Include Software Installation, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Udh - 701 Vekaria Make Or Its Equivalent. , Supply And Installation Of Bangle And Ring Turning Machine Specification: 1.5 To 3 Specification: Bangle Turning Machine (Without Any Accessories)- With Standard Inside Bangle Turning Socket - 1 Pc.- With Standard Outside Bangle Turning Mandrel - 1 Pc.- Bangle Turning Tool Holder - 1 Pc. Bangle Nylon Collets Set- Set Of 33 Inside Turning Collets (Size From 2” To 3”) And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries Or Its Equivalent. , Supply And Installation Of Bangle And Ring Profiling Machine 2 To 3 No.S 17 To No. 49 With Bangle Stretcher /Pep Tools. Specification: Combined Double Head (Horizontal And Vertical) *Simple To Calculate Divisions Up To 120 Parts*Robust Base With Mounting Holes For Hassle Free Operating*Dual Motor (1 For Each Head) (0.17 Hp/ 2800 Rpm)*Spindles (Rpm) - Horizontal – 5600 / Vertical – 6500* Motor 0.25 Hp* Machine Dimension 76X76x82 Cm, Bangle Nylon Collets With 1 Bangle Holder For Diamond Cut Faceting, Ring Nylon Collets With 1 Ring Holder For Diamond Cut Faceting, Ball Attachment, Half Ball Collets Set Of 6, Chain Attachment And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries Model Sku: 16.0701 (Bangle Ring Turning Machine) Or Its Equivalent. , Supply And Installation Of Laser Engraving Machine 12000Mm/Sec, Cooling Systemspecification: Platform - Safety Enclosure, Operating Mode - Mopa Pulse Fiber Laser, Wave Length - 1064 Nm, Pulse Frequency - Upto 2000 Khz, Output Power - 20 Watt Mopa Pulse Fibre Engine, Focusing Optics (Nm) - 100, 163, 254, Cooling Capacity - Fully Air Cooled, Heat Sink, Profile Laser (Optional) - Visible, Red Beam Pilot Laser, Laser Safety Compliance - Fda (Cdrh), Csa, Ce.With High Speed Fiber Laser Marking Technology Marking/Deep Engraving /Cutting On Precious Metals, With Dust / Fumes Collection Unit.Pulse Fiber Laser (Mopa Engines) And Including Cost And Conveyance Of All Material, Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: 3802 Series Laser Marker With Rotary & Laptop Of Laser Star Make From Italy Or Its Equivalent. , Supply And Installation Of Cnc Router Machine With 3D Printer With Supporting Printing Material Specification: Jewelers Engraving 3-4 Axis With Zczb Wax Printer/ Stablizer /Struller/ Chemical /Computer Set /Heater Cleaning Tools/Back Up Ups. Molding Method - Mjp, Molding Size - 294*211*144 Mm, Printing Mode - Xhd:1200*1200*1600 Dpi:16, Dimension Accuracy - + 0.04 Mm/20 Mm, Power Supply - Ac 220-240 V, 50 Hz, 3 Kw, Overall Size - 1415*790*1160 Mm, Overall, Weight - 380 Kg, Package Size - 1700 *1000*1400 Mm, Application Software - 3D Print Data Support Format - .Stl/.Slc, Operation Environment - 18-28 ° C / 30-70 % Humidity And Including Cost And Conveyance Of All Material, Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work. , Supply And Installation Of Digital Weighing Machine - Set Of 10 Machines With Calibration Set Up Specification: Weighing Capacity: 62 G, Resolution: 0.1 Mg, Calibration: External, Display Type: Clear Reverse Backlit Lcd Display, Standard Interface: Rs -232 C Repeatability: 0.1 Mg, Weighing Pan: Ø90 Mm And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: A&D Japan Or Its Equivalent. , Supply And Installation Of Ball Making Machine With Full Set Of Sheet Drawing Of Pipe Making, Soldering, Sheet Striping Machine, Hammering With All Standard Accessories Specification: Power: Single Phase, 220 V, Weight: 158 Kg, Dimensions: 45 X 76 X 106 Cm Suitable For Production Of Small To Large Sized Round, Long Oval, Long Barrel Shaped Balls From Strip Or Tube By Changing Dies, Size: 1.8Mm - 8 Mm, Ac Power 2 Hp Motor, 80-100 Balls Per Minute With Oil Pump, Weight 350Kg, Material Die Steel, Suitable For Production Of Balls Or Other Shapes Chain In Small Dimensions By Changing Dies From 0.60Mm Up To 2.00Mm, Ac Power 1 Hp Motor, 80-100 Links Per Minute With Oil Pump, Weight 300Kg. (Approx), High Grade Die Steel Material. With Separate Sheet Metal Drawing Machine Setup, To Manufacture Hallow And Solid Gold Ball Shapes, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Laser Welding Machine 130 Joule Capacity With 150 Joule Cap.Specification: Source Type - Nd: Yag (Flashlamp), Wavelength - 1064 Nm Output Power (Watts) - 60 W /80 W, Maximum Peak Power - 11 Kw, Pulse Frequency - 0.5 - 50 Hz, Beam Diameter - 0.05 - 2.00 Mm, Burst /Speed Welding - Optimized To Energy Values, Max Pulse Energy - 180 J, Pulse Performance Profile Technology - Exclusive Integrated Software, Soft Touch Resonator Technology - Beam Profile Technology (Optional), Supply Circuit - 120 V Or 230 V (+ 10 %)50/60 Hzfunctionality: 1. Automatic Energy Save Mode, 2. Integrated Preventive Maintenance Alerts, 3. Multi Language System Display, 4. 99 Memory Settings, 5. Preprogrammed Application Parameters Ceramic Cavity New Technology, 6. Inbuilt Cooling System Specially Designed For Jewelry Industry, And 7. Less Maintenance And More Efficient Power Supply Technology., And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Workmake/Model: Laser Star Brand Pedistal/Stablizer Or Its Equivalent , Supply Of Gold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes) Specification: Dies With Different Sizes And Its Supporting Consumable Materials For Die Punching Machine. 10 Mm (3/8 Inch) Letter & Number Punch Set (0 To 9) & 27 Letters, Type Of Product: Punch, Weight: 995 G, Size: 10 Mm, Material: Carbon Steel, Usage: Professional I.E., On Gold And Silverand Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries / Kravetto Or Its Equivalent , Supply Of Gold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes) Specification: Dies With Different Sizes And Its Supporting Consumable Materials For Die Punching Machine. Material Stainless Steel, Model Name/Number Devi: Embossing Dies, Weight 50 Gm Gross Weight 70 Gm, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/ Model: Eagle Industries/ Shree Ambika Tools Or Its Equivalent. , Supply Of Gold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes)Pattern Dimensions 3Mm - 50Mm, Material D2 D3, Usage/Application Bangle Ring Jewellery Making As Per Required Designs Quantity - 400 Pieces And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries/ Shree Ambika Tools Or Its Equivalent. , Supply Of Gold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes) Pattern Type: Round, Pattern Dimensions: As Per Requirements, Usage/Application: Coin Making, Material Stainless Steel, Customization: As Per Requirements, Diameter: 1Oo Mm, Finishing: High Chromium Double Polished, Hardness: Tempered And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries/ Shree Ambika Tools Or Its Equivalent. , Supply Ofgold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes) Pattern: Type Square, Pattern Dimensions: As Per Requirements, Usage /Application: Coin Making, Material: Bronze And Hard Ss, Customization: As Per Requirements, Diameter: 1Oo Mm, Finishing: High Chromium Double Polishedhardness: Tempered And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries/ Shree Ambika Tools Or Its Equivalent. , Supply And Installation Of Digital Vacuum Pressure Casting Gold Melting Machine Capacity: 2.4Kg, With Digital Display And Cooling System.Fully Automatic Casting Machine Brand/ Reiacetech Wax Mono Endura / Indigenous Furnace 6 To 8 Flask Capacity/Matrix Investment Mixer 5 Flask/ Steam Machine /Ultra / De-Waxing/Water Jet/Manual Wax Injector/ Tools /Materials For Casting/ Cylinders Powder / Stabilizer Set For All The Machine And Support Materials. Specification:Power: 11 .0 Kw, Frequency: 6 Khz, Ac Line, (50/60 Hz), 3 Phase:400 V + 10%, Melting Temperature (Max): 1300 ° C, Crucible Capacity: 3 Kg Au, Crucible Volume: 208 Cm3, Flask Size (Min): 87 Mm X 127 Mm, Flask Size (Max): 120 Mm X 300 Mm, Vacuum Pump: Included , Weight: 290 Kg (639.3 Lb), Dimensions: 70 Cm X 101 Cm X 135 Cm, Inlet Water Temperature: 35 ° Cfunctionality: Vacuum Casting Machine With Auto/Manual Technology Operating Process With High Pressure Vacuum Motor. Add On Machines For Pre Casting And Post Casting: Reiacetech Wax Injector From Italy Or Its Equivalent. Ingenious Furnace 6 To 8 Flask Capacity With 4 Side Heating Capacity. Indeginous Investment Mixer 5 Flask Capacity. Steam Machine For Gold Tree Cleaning, Manual Wax Injector Ultra Sonaic Machine, Steam De-Waxing Machine, Tool And Consumables For Casting Unit, Stabilizer Set, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Gold Melting Machine With Digital Display And Cooling System Capacity: 2Kg With Digital Display And Cooling System, Two Models With Chiller From 50 Gm To 2 Kg, Melting Capacity / Rio Grande Melting Machine With Digital Display With Graphite Crucible Sets And 50 Gm To 500 Gm Capacity (2 Or 3 Qty Required) Specification: With Ceramic Based Crucible With Digital Thermocouple Heating Sensor Display Screen, Power - 440 V 3 Phase, Water Cooler - 35 Littre (In Built), Weight - 120 Kg, Dimensions - 36 X 30 X 45 And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Gold Refinery Machine 2Kg Charged Up To 6 Kg Per Day With Digital Display And Cooling System Should Have Excellent Thermal Insulation To Prevent Loss. Specification: Gold Refining Unit, Power Supply: 400 V / 3 Phase, Power: 0.3 Kw, Dimension In Mm: 1200 X 670 X 1120, Weight: 80 Kgs. To Have Low Running Costs, Fully Automated Process With Process Control And With Fumes Filter & Exhaust Filter And Including Cost And Conveyance Of All Material, Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Koras Refining Unit With Auto Stirrer Set Up With Acrylic Material Or Its Equivalent. , Supply And Installation Of Hydraulic Die Cutting Machine: Capacity:25 Tons, 150Mm Stoke Cylinder, 20Mm/Sec Fast Forward Speed Specification: Hydraulic Die Cutting Machine: Capacity:25 Tons, 150Mm Stoke Cylinder, 20Mm/Sec Fast Forward Speed, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: High Pressure Hydraulic Die Cutting Machine From Hk Brand Or Its Equivalent. , Supply And Installation Of Mesh Chain Machine With Standard Accessories Specification: Material: Mild Steel, Power 4.0 Kw, 5.5 Kw, Voltage 380 V, Dimension (Lxwxh) 3800Mm X 3000Mm X 1400Mm, Different Shapes Of Box Chain Making Machine With Auto Setting And Manual Operation Process. Die Replacement Or Fixing Process To Be User Friendly And To Produce Higher Production In Short Time, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Modern Chain Machines / Vekaria Or Its Equivalent. , Supply And Installation Of Box Chain Making Machine With Standard Accessories Specification: Material: Mild Steel, Power 4.0 Kw, 5.5 Kw, Voltage 380 V, Dimension (Lxwxh) 3800Mm X 3000Mm X 1400Mm, Different Shapes Of Box Chain Making Machine With Auto Setting And Manual Operation Process. Die Replacement Or Fixing Process To Be User Friendly And To Produce Higher Production In Short Time, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Modern Chain Machines / Vekaria Or Its Equivalent. , Supply And Installation Of V-Chain Making Machine With Standard Accessories Specification: Motor: 0.50 Hp Pmdc Motor & Drive Speed Control Rpm 0 – 1500. 180 Wt. 1 Year All India Warranty. Table: Machine Cabinet Steel Mattel & Weight 49Kg. Electronic Panel: Dc Drive Full Electronic Panel• Sensor (Auto Cut)• Heater (37 Wt., Temperature 800O). Features: Automatic Machine For Venetian Chains, Variable Speed Controller, Forced Lubrications System With Oil Tank And Electronic Brake Sensor, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Best Indian Heavy Duty Machine/ Vekaria Brand Or Its Equivalent. , Supply And Installation Of 12 Pass Wire Drawing Machine With Full Set Of Standard Accessories Specification:Max. Wire Diameter (Guage/Mm) = 20/0.91 To 18/1.22.•Min. Wire Diameter (Guage/Mm) = 36/0.91 To 36/0.19.•Main Motor = 1.5 To 2 Hp.•Cooling Motor = 0.25 Hp.•Machine Weight =225 To 345 Kg. Heavy Duty Sturdy Metal Frame That Holds The Motor.•Transmission Drive.•Speed Control Drive.•Cooling Liquid Tank And Sprayer.•The Unwinding Reel.•The Motorized Winding Reel With Adjustable Clutch.•Steel Palermo For Longer Durability Of Machine. And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Hk Brand Or Its Equivalent. , Supply And Installation Of Sheet And Wire Drawing Machine With Standard Accessories With Heavy Duty Motor Capacity And Auto Stopper Technology Specification: Wire & Sheet Rolling Mill For Gold & Silver • Roller Length 200 Mm X 100 Mm. • Heavy Duty Machine • Bronze Bushings • 5 Hp Electric Motor • Three Phase Power Supply • Hardened Ground Steel • Roller Mouth Openness: 20 Mm. • Weight 800 Kg, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Hk Brand Or Its Equivalent , Supply And Installation Of Laser Marking Machine Specification: Karat Mark: Laser Marker (20 / 30 W Power) Specification: Laser Power: 20 W-30 W, Laser Wavelength: 1064 Nm, Frequency Range: 20 - 120 Khz 1-600 Khz, Beam Diamter: 7+1 7 + 0.5, Format Supported: All Vector Files And Image Files (Bmp, Jpg, Gif, Tga, Png, Tif, Ai, Dxf, Dst, Plt), Scan Field: 100 X 100 Mm Scan Speed <<7000 Mm/S, Power Regulating Range: 10 -100 %, Cooling Method: Air Cooling, Operating Environment - 0° C - 40 ° C (Non -Condensing), Electricity Demand - 220 V (110 V)/50 Hz (60 Hz), Size & Weight - Around 24 X 17 X 15 In, Gross Weight Around 22 Kgs, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make /Model: Alpha Laser Marker (20/30 W Power) , Supply And Installation Of Xrf Machinemistral Sdd, Item Note: Xrf Karat Meter (Sdd) Stabilizer / Support Specification:Intended Use: Energy Dispersive X-Ray Measuring Instrument (Edxrf) To Determine Thin Coatings, Trace Elements And Alloys. Element Range Aluminium (13) To Uranium U (92) - Up To 24 Elements Simultaneously. Designs Bench Top Unit With Upward Opening Hood, Measurement Direction: From Bottom To Top, X-Ray Source, X-Ray Tube Micro Focus Tube With Tungsten Target And Beryllium Window, High Voltage Three Steps: 10 Kv, 30 Kv, 50 Kv, Aperture (Collimator) 4X Changeable: 00.2 Mm (7,9 Mils), Ø 0.6 Mm (23.6 Mils), Ø1 Mm (39.4 Mils). Primary Filter: 6X Changeable: Ni, Free, Al 1000 ?M (39.4 Mils). Al 500 ?M (19.7 Mils). Al 100 ?M (3.9 Mils), Mylar 100 Um (3.9Mils)Measurement Spot Depending On The Measuring Distance And On The Aperture In Use, The Actual Measurement Spot Size Is Shown In The Video Image. Smallest Measurement Spot Approx. 0.3 Mm (11.8 Mils) And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Fisher Xrf Sdd Brand Or Its Equivalent. , Supply And Installation Of Assay Balance: 0.001 Mg Accuracy With Mettler Toledo Scale Je3002 G/M Gold Scale 3.200 With Digital Display. Specification: Weight Capacity - 6000 G Resolution - 1000 Mg Repeatability - 0.01 G Calibration - External And Internal Display Type - Vacuum Fluorescent Display (Vfd) Weighing Pan - Ø150 Mm Standard Interface - Rs -232 C And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Mettler Toledo Scale Or Its Equivalent. , Supply And Installation Of Sartorius Analytical Balance Machine With Digital Display With All Standard Accessories. Specification: Weight Capacity - 6000 G Resolution - 1000 Mg Repeatability - 0.01 G Calibration - External And Internal Display Type - Vacuum Fluorescent Display (Vfd) Weighing Pan - Ø150 Mm Standard Interface - Rs -232C And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Mettler Toledo Scale Or Its Equivalent. , Supply And Installation Of Sartorius Precision Balance Machine With Digital Display With All Standard Accessories. Specification:Weighing Capacity: 62 Gresolution: 0.1 Mgcalibration: Externaldisplay Type: Clear Reverse Backlit Lcd Displaystandard Interface: Rs -232 Crepeatability: 0.1 Mgweighing Pan: Ø90 Mm And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Mettler Toledo Scale Or Its Equivalent. , Supply And Installation Of 50Gm, 100Gm, 200Gm, E2 Class Wire Weight With Display Attachment Item Note: 50Mg. E-2 Class Wire Weight With Nabl Calibration Certificate. Specification: Calibration Units With Stainless Steel Measuring Exact Weight Standards For Weighing Machines Block. Weights Intended To Ensure Traceability Between National Mass Standards (With Values Derived From The International Prototype Of The Kilogram) And Weights Of Class E2 And Lower. Class E1 Weights Or Weight Sets Shall Be Accompanied By A Calibration Certificate, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Tools And Equipment For Sampling Balling Pliers, Couplers, Scraping Tools, Tongs, Forceps, Rolling Mill Etc. For Complete Assay Set Up Please The Link As Provided Below, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Furnaces, Scrubbers, Parting Tray Etc. Item Note: For Hallmarking Full Setup Center Required. (3 Phase Power, Pollution Clearance Certificate Bis Approval Fee, And All Things) Specification: Annealing Furnace With 220V / Single Phase Along With Supporting Materials. Assay Supplies: Assay Laboratory Spare Parts And Consumables, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work For Complete Assay Set Up Please The Link As Provided Above Against Item No. 29 , Supply And Installation Of Safety Equipment: As Per Project/Customer Requirements..I)Cctv Cameras With Night Vision2 Megapixel Ip Cameras With Motorized Verifocal& Pixel Zoom ; Progressive Scan Cmos 1/2.8 Or 1/3Format; Focal Length 2.8 To 12Mm; Zoom Range – 4.2X Varifocal; Multiple Simultaneous Stream; Streams First Stream : Full Hd, 1~30Fps; 1280X720, 1~30 Fps; 704X576, 1-30Fps, Second Stream 704X576, 1~30Fps; 352X288 10~30Fps; Video Compression 32 Kbps ~ 16 Mbps, Support Cbr/Vbr; H.264 Version 3, High Profile Encoding And Motion Jpeg Format Support; 1920(W) X 1080(H) Or Higher Active Pixels; Built-In Ir With 2 Or More Epled; Sw Supported Digital Wdr ; Auto Blc; Sd Memory Slot Upto 32Gb Class 10; Minimum Illumination Icr Colour 0.1 Lux (F1.2 Agc On) B/W 0.001 Lux (F2 Agc On); Shutter Speed 1/25-1/10,000S ; Multiple Resolution 4Cif(704X576), Cif (352X288); 12Vdc / 24Vac / Ieee802.3Af Poe (Rj-45) Support; Supporting All Network Protocols (List The Supporting Protocols); 10/100 Base-T, I/O Audio Support, Audio Compression G.711; Multi-Level User Access With Password Protection; Ip Address Filtering; Https Encrypted Data Transmission; Ieee 802.1X Port-Based Authentication For Network Protection; Ip Address Filtering Https Encrypted Data Transmission; Operating Temperature -10 Deg C To +55Deg C,Onvif Compliant, 36 Months Comprehensive Warranty. Ce, Fcc, Emc & Rohs Certification; And Ul Certification For Core Adaptor Are Mandatory; Onvif Complaint Make: Cp-Plus/Cp-Unc-Tb21zl6s-Vmds27125/Panasonic/Pi-Spw 201Dl/Bosch/ Nti 50022-A3s. Integration Of Cctv System To The Central Server Unified Command Centre Solution Platform (Uccs) At District Police Headquarters Command Center(Dphcc) In Coordination With The Police Department / Designated Agencyand Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of 32 Channel Network Video Recorder(Nvr) : Supply, Installation, Testing And Commissioning Of 32Ch Embedded 4K Nvr 4Sata Expandable Up To 40Tb, Audio Input & Output, Two Way Communication Supported, G7.11 Audio Format Support, 320Mb Recording Throughput, 16 Alarm Inputs & 4 Outputs, Rs485, Esata And Rs232 To Be Supported With Maximum 16 Users, Op. Temp -10 To 50 Deg. C, Ndaa Compliant, Ul/Ce/Fcc Certified, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Makes: Cp-Plus/Panasonic/Pi-Spw 201Dl/Bosch/ Octavision/Hikvision. , Supply And Installation Of Wallmounting Network Rack Supplyand Fixing Of 6 U Wallmounting Network Rack With Power Spike Including All Accessories Etc., Complete. And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make:Hcl / Vall , Supply And Installation Of 8Port Poe Switch Supply & Fixing Of Small Business 8 Port Gigabit Poe Managed Switch, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work. Make:Netgear/Dlink , Supply And Installation Of Safety Equipment: As Per Project/Customer Requirements. Specification: Lan Cable Cat -6 Utp Cable And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Makes : D Link / Amp / Molex / Legrand / Krone, , Supply And Installation Of Safety Equipment: As Per Project/Customer Requirements. Specification: Hard Disk 8 Tb And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Makes : Segate/ Sv-35/Toshiba. , Supply And Installation Of Air Conditioner A/C 2.0 Tonne A/C With Low Power Drive Module.Supply And Transportation Of Inverter Model Cool Type Split Ac Unitwith High Wall Mounted Single Split 100% Copper Indoor And Outdoor Condencing Unit Hermetically Sealed Compressor Suitable For Operation On 230V, 50Hz, 1Phase Ac Supply Capable Of Performing Heat Cool Dehumidifying Air Circulating And Filtering With Cooling And Condensing Units With 3.0 Mts Of Copper Piping, Insulation Kit And 4 Mts Of 4 Core Copper Flexible Chord (Voltage Range 160- 264 Volts) And Cordless Remote Control With Warranty Of Compressor For 5 Years And Comprehensive Maintenance For 2 Years2.0 / 1.8 Tr 5 Star Capable Of Delivering 21600 Btu/Hr And Above With Operating On Refrigerant R-32 / R-410 And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Makes: Daikin / Toshibha / Carrier / Blue Star / Hitachi Or Equivalent , Supply And Installation Of Computers: Core-I7 10Th Gen Processor, 8Gb Ram, 1Tb Hdd, Windows 10 Pro. Specification: General :Wired Usb Keyboard & Optical Scroll Mouse 1 X Ps/2 Combo Port 2 X Usb 3.2 Gen 1 Ports 6 X Usb2.0 Ports 1 X Rj-45 Port 1 X Hdmi Port 1 X Vga Port 1 X Audio Port (Line Out/Line In/Mic In) 1 X Pci Express X16 Gen 3.0 Slot 1 X Pci Express X1 Gen 2.0 Slot 1 X Audio Port (Line Out/Line In/Mic In) 450W 19V/0.84A 80Mm X 310Mm X 395Mm 510Mm X 360Mm X 182Mm 12.5 Kg (Total Pc) Ce, Rohs Table Top 3 Years Warranty Cpu, Monitor, Keyboard & Mouse, User Manual, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Standard Make , Supply And Installation Of Ups 10 Kva System (8 Kwatt ) Specification:Input Voltage 80 / 400 / 415 Vac; 3 Phase, Ninput Voltage Range ± 15%Input Frequency 50 / 60 Hzinput Frequency Range ± 10%Input Power Factor > 0,85Output Power Factor 0,8Output Voltage 380 / 400 / 415 Vac; 3 Phase, Noutput Frequency 50 Hz / 60 Hz (Selectable)Battery Type No Maintenance Batterybattery Unit 30Charge Voltage 405 Vdcbattery Charge Time 8 Hours To 90% Capacity After Deep Dischargebattery Test Automatic And Manuel Battery Test Systemover Load Capacity 100% ~ 125% Load 10 Minutes; 125% ~ 150% Load 1 Minute; > 150% Load On The Bypassdimension Wxhxd (Mm) 490 X 1200 X 680Weight ~ 240 Kg., And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Standard Make , Supply And Installation Of Generator (20Kva Dg Set) Specification: Power: 20 Kva (16Kw) Fuel Consumption (At 100% Load): 5.09 Ltrs/Hr Fuel Tank Capacity: 63 Ltrs Phase: 3 Phase Dry Weight (Kg): 720 Frequency: 50 Hz Engine: 2 Cylinder, In-Line 4 Stroke, Radiator Cooled Engine, Electrical Starter Motor With Soft Start Engagement Feature, Battery Charging Alternator. 1 X 12 V Dc Battery, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Standard Make
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Telangana View Result →
16.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Jharkhand View Result →
17.
Educational and Research Institute #10372706 Price Bid
Procurement Of Equipment, Instrument, Machineries, Tools Etc. Related To Laboratories Procurement Of Equipment Related To Laboratories And Workshops Of Mechanical Electrical Civil Chemical Engineering And Science Humanities Departments Of Hooghly Institute Of Technology Hooghly-Strain Gauge Trainer Kit - Gauge Factor : 2.1 Maximum Bearable Weight : 500 Gm, Cantilever Material : Stainless Steel, Bridge Configuration : Full Bridge Display : 3½ Or 4 Digit Ledwith User Manual 2 Measurement Of Temperature Using Thermocouple, Rtd, Thermistor, Ad950 - Transducers With Electronic Instrumentation Transducers : Thermocouple ( K - Type ) , Thermocouple ( J - Type ) , Thermistor ( Ntc ) , Rtd ( Pt 100 ) , Semiconductor Sensor ( Lm 335 ) And Semiconductor Sensor ( Ad 590 ) With User Manual 3 Bourdon Tube Type Pressure Gauge - Bourdon Tube Type Pressure Gauge, Pressure Range Upto 10, 000 Psi, Accuracy Upto + / -0.25%, With Pumping System 4 Flow Control System Using Mass Flow Meter, Single Loop Controller And Control Valve - Set Up Should Consist Of ---Mass Flow Meter, Single Loop Controller, Control Valve ( Glove ) , Transmitter Should Be Installed At The Upstream Of Control Valve, Controlling Facility By Controller, Continuous Water Recycling Facility, Table Mounted Set Up Preferable With User Manual 5 A / D & D / A Converter Trainer Kit - Analog To Digital Converter • 8-Bit Descrete Adc • On-Board Signal Generator With Adjustable Amplitude Levels • On-Board Led Bank To Observe Digital Outputs • Power Supply : +5V, ±12V Gnd • Interconnection Is Provided By 2Mm Connectors • Experimental Manual Digital To Analog Converter • 8-Bit Binary Weighted Resistors Dac • 8-Bit Ladder Type D To A Converter • Onboard Switches Are Provided For Digital Pattern Generation • 8-Bit Digital Inputs Ranges From 00 To Ff • Extensive Experimental Manual Is Provided With The Kit 6 8051 Based Advanced Microcontrollertrainer - 8051 Microcontroller Trainer Kit;Based On Intels 8051 Microcontroller 12Mhz With • On Board Power Supply • Rechargeable Ni-Cd Battery • Ascii Keyboard Interface • Programming Interface With Pc • Compiler And Cross Assemblers For Programming In C, • Lcd Display, 8051 Usb Programmer, 16*2 Lcd, Light Sensor Module ( Ldr ) , Tsop Sensor Module, 4*4 Matrix Keypad, Aa 6 Cell Holder, Burge Strip F-F Connectors, • 32 K Or Higheruser Ram. ( Expandable ) • Serial I / O Through 8251 Usart • Parallel I / O Lines Available Through Two 8255 Chips • 3 Channels Of 16 Bit Timer / Counters From 8253. 8254 • Adc & Dac Interface Module • Stepper Motor Interface • Square, Triangular, Staircase Wave Generator Interface Module • Dc Voltage, Current Measurement Interface Module • Zero Crossing Detectors Interface Module • Users’ Guide • Cd - Required Software, Usb Cable, Microcontroller & Its Interfacing Book With Application Projects, Cd - Required Software 7 Microcontroller Development Kit - 8051 Development Kit With Accessories And Software 8 Solar Photovoltaic Cell Characteristics Trainer Kit - 12V Solar Module With Suitable Arrangement Of Halogen Lamps 500W, Digital Dc Voltmeter And Ammeter, Lux Meter And Variable Resistive Loadwith User Manual 9 Flux Meter ( Magnetic ) - Integrating Type Digital Fluxmeter, With 3&Half Digit Digital Display, 4- Ranges Of Measurements Indicating Flux Values From 0.1 Kmt ( Kilo Maxwell Turns ) To 2*105 Kmt 10 Digital Storage Oscilloscope ( 70 Mhz ) Detailed Technical Specifications:- A ) No. Of Channels : 2 Or 4 B ) Bandwidth : 70 Mhz C ) Maximum Input : 400 V ( Peak ) D ) Sample Rate : 2 Gsa / Sec E ) Waveform Update Rate : 400 Waveforms / Sec F ) Memory Depth : 100 Kpts Standard ( Upgradable ) G ) Time Base : 5Nsec / Div. To 50 Sec. / Div H ) Waveform Update Rate: 50, 000 Waveforms / Sec I ) Display : 8.5 Inch Colour Wvga J ) Trigger Modes : Force, Edge, And Video, Pulse Width. K ) Built In Interface : Standard Usb 2.0 High Speed Device 11 Lcr Q Meter - Measuring Inductance ( L ) , Capacitance ( C ) , Resistance ( R ) , Quality Factor ( Q ) And Dissipation Factor ( D ) . With A Basic Accuracy Of 0.25% And Five Digit Display Resolution. 12 Diode And Zener Diode Characteristics Trainer - A Complete System To Study The Diode Characteristics Forward And Reverse Characteristics Experiment Can Be Performed On This Trainer Kit Silicon, Zener And Germanium Diode Are Provided With This System. Inbuilt Ammeter And Voltmeter. Digital Display For Displaying Voltage And Current. Different Test Points With User Manual 13 Experimental Kit For Input / Output Characteristics Of Bjt- One Fixed 12V Power Supply, One Variable Constant Voltage Source And One Constant Current Source For Output Characteristic Of The Transistor. Three Digital Meters On The Panel. One Fixed Frequency Of 1Khz With Variable Amplitude , Bread Board With User Manual 14 Training Kit To Study Of Opamp Characteristics - Specification: 2 No. Variable Dc Power Supply 0-3V / 30Ma, 1 No. Fixed Dc Power Supply 12V1 No. Operational Amplifier Ic 741 & Different Types Of Resistance, Capacitors And One Potentiometer With User Manual 15 Training Kit To Study Of Universal Logic Gates & Applications With Power Supply - • On Panel Gates : 4 Nand Gates ( 7400 ) , 4 Nor Gates ( 7402 ) , 4 And Gates ( 7408 ) , 4 Or Gates ( 7432 ) & 6 Not Gates ( 7404 ) • 5 Nos Of Extra 18 Pin Ic Base Mounted On Panel To Use Different Ics • 5 Logic Input Switches With Led • 5 Logic Output Led • On Panel 5 Sockets Each For +5 V & Gnd • Required Numbers Of Patch With User Manual 16 Training Kit For Study Of Kirchhoff’S Current & Voltage Law- Equipped With Necessary Resistors, Digital Voltmeters, Ammeter And Inbuilt Variable Power Supply 5V & 12V.On Board Test Points To Observe Signals, On Board Schematic Diagram, With User Manual 17 Analog Wattmeter - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Dynamometer Type Wattmeters I ) 5-10A, 150-300-600V, Ii ) 10-20A, 150-300-600V. 18 Series Parallel Resonance Of R-L-C Ckt - Kit For Series Parallel Resonance Of R-L-C Ckt: The Set-Up Consist Of Power Supply, Audio Oscillator With Digital Readout, Digital Rms Meters And Different Number Of Inductors ( Smoothly Variable ) , Capacitors, Potentiometer, Ammeter & Voltmeters With User Manual 19 Power Factor Meter ( Single Phase ) - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Power Factor Meter- Dynamometer Type Power Factor Meter , 1 Phase , Current Coil Range : 2.5 & 5.0 Amps. ( Dual Range ) , Pressure Coil Range: 150, 300 Volts ( Double Range ) . 20 Power Supply:Dc - • 2X30v-3A, 5V-3A • Constant Voltage & Constant Current Operation • Digital Displays For Voltage & Current • Adjustable Current Limiter • Protection Against Overload & Short Circuit 21 Training Kit For Verification Of A ) Superposition Theorem. B ) Thevenin’S Theorem. C ) Norton’S Theorem. D ) Maximum Power Transfer Theorem. Two Nos. Variable Dc Power Supply. Two Nos. Resistive Potentiometer ( Pot ) . Differnt Values Sets Of Resistances. Digital Dc Voltmeter, Dc Ammeter, Complete Operating Manual, Connecting Wires , Patch Cords, Etc. 22 Ac Distributor Simulator - Transmission Line Trainer Consist Of:- 100 Km X 3 Phase Tx Line Block At The End Of Each Block Short Is Possible All Digital Multifunctional Meters At The Sending & Receiving End, Loading Provision For Total 1Kva – Load Of Variable Separate Inductive, Capacitive & Resistive Load Bank. High Quality Patch Cord And User Manual. 23 Lux Meter - Sensitivity – 1 - 50, 000 Lux Error Percentage + 5%, 4 ½ Digit To 5 ½ Digit Detail Operating Manual Also To Be Supplied 24 Dielectric Strength Test Setup For Transformer Oil - Transformer Oil: Breakdown Voltage : 0-60Kv, Vertical Panel Mounted With Voltmeter, Glass Cover Encapsulated, Test Cup And Gap Measuring Gauge With 10 Liter Of Transformer Oil 25 Digital Insulation Tester , Digital Insulation Tester: 500V, 200Mohm, Portable Type 26 Half Wave & Full Wave Bridge Rectifier Trainer Kit, 1 / 2 Wave, Fullwave ( Centre Tapped & Bridge ) With Filter Ckt With User Manual 27 Experimental Kit For Characteristics Of Zener Diode, Complete Set Should Consist Of All Accessories To Perform The Experiment Using A Zener Diode Fitted On The Printed Boardwith User Manual 28 Experimental Kit For Input / Output Characteristics Of Bjt, Transistor Trainer Kit Consists Of One Fixed 12V Power Supply, Variable Constant Voltage Source And Constant Current Source For Output Characteristic Of The Transistor.Digital Meters On The Panelwith User Manual 29 Experimental Setup For Implementation Of Adder & Subtractor, With Adder ( Half & Full ) & Subtractor ( Half & Full ) Using Basic Gates. Must Have Onboard Input Supply, Display To Show Logic Outputwith User Manual 30 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer With Power Supply, Display Unit, Patch Cords, Necessary Ic And Manuals For Each. 31 A / D & D / A Converter Trainer Kit 8 Bit With Accessories And Manual. 32 Scr Single Phase Half Wave, Full Wave, Fully Controlled Bridge Rectifier / Converter With In-Built Meters And On-Board Power Supplywith User Manual 33 Training Kit For Study Of Vi Characteristic Of Scr, Igbt , With Separate Section For Scr And Igbt Characteristics With In-Built Meters And Led Indicationswith User Manual 34 Scr Firing Circuit, Power Requirement: 230 Vac +10%, 50Hzstandard Accessories:6 Volt / 1 / 4 W Lamp, Patch Chords & Instruction Manual 35 Training Kit For Study Of Vi Characteristic Of Diac, With Proper Heat Sink And Training Manual.Consists Of One No. Diac With Proper Heat Sink.All Components Should Mount On A Screen Printed Pcb Fixed On Acabinets 36 Scr Commutation Circuit, Scr Commutation Circuit Commutation Techniques Used . I ) Class A Ii ) Class B Iii ) Class C Iv ) Class D V ) Class E Vi ) Class F • In Built Ic Based Dc Regulated Fixed Power Supply +12Vdc & Acwith User Manual 37 Electronic Energy Meter, A.C. Single Phase, 2 Wire Solid State ( Static ) Fully Electronic Energy Meter, Accuracy Class 1.0 & Current Rating 5-30 Amp. With Backlit Lcd Display For 240 Volt System Fitted With Pilfer Proof Meter Box. 38 Trainer Kit For Measurement Of Medium Resistance By Wheat Stone Bridgekit Must Have Inbuilt Power Supply, Measurement Range 1 Ohm – 100 Ohm, Having Sensitive Galvanometer With User Manual 39 Trainer Kit For Measurement Of Low Resistance By Kelvins Double Bridge, With Power Supply, Range 1 Microohm -1 Kiloohm, Having Sensitive Galvanometerwith User Manual 40 Earth Tester, Insulation Reslstance Test: More Than 25 Megohms At 500 V Dc Between Electrical Circuit & Containing Case, Display: Led Or Lcd. Dual Ranges: 0 - 10 - 1000 Ohm ( B ) 0 - 5 - 500 Ohm 41 Trainer Kit For Measurement Of Inductance By Anderson Bridgekit Must Have Built In Power Supply, Inbuilt Signal Source, Application Bridge On Screen Printed Front Panel Display, Set Of Unknown Inductance Coil, Variable Resistance, Set Of Capacitance, Audio Null Detector, Patch Cords, Connecting Wires And Head Phone, Complete Operating Manual. 42 Trainer Kit For Measurement Of Capacitance By Schering Bridge Kit Must Have Input Supply 50 Hz Sine Wave, Two Ratio Dial P & Q, Each Having 1, 10, 100, 100 Ohm Coil, 3 Decade Dial, X 0.001 Microfarad, 0.01 Microfarad, 0.1 Microfarad. Having Sensitive Head Phonewith User Manual 43 Tri-Vector Meter 3Ph 4 Wire Lt Ct & 3Ph 3 / 4 Wire Ht Ct / Pt Operated Fully Static Amr Compatible Tri-Vector Energy Meters Dlms Compliant – Category C 44 Trainer Kit For Measurement Oflinear Displacement Bylinear Variable Differential Transformer ( Lvdt ) For Linear Displacement, Type: Spring Loaded Core Type, Configuration: Axial Type Lvdt Full, Actual Displacement: By Micrometer Arrangement Pitch: 1 Mm, Circuit: Ac Excitation Source, Phase Detector & Digital Display, Excitation Source: Sine Wave Of 2 Khz To 5 Khz Variable Frequency And 0 To 5 Or 12V Variable Amplitude, Readout: Digital Display To Measure 0 To + / - 10 Mm, Indicating, Displacement In Millimeters With Core In / Out Indicated By + Sign, Test Points: Instruction Manual 45 Measure Pressure Using Pressure Sensor Kit.Resistive Pressure Transducer With Pressure Of 0-300Mm Hg / 6Psi, Primary Excitation Voltage Of 5V Dc On Board Provided. On-Board 41 / 2 Digital Panel Meter Provided Using Ad7135. Pressure Generation And Monitor Using A Pressure Gauge. Onboard Instrumentation Amplifier Provided With User Manual. 46 Trainer Kit For Op-Amp As Inverter, Non-Inverting Modefront Panel Built With High Class Insulated Printed Circuit Board Sheet With Well Printed Circuits And Symbols. Fuse For Short Circuit Protection. Patch Cords. The Trainer Is Housed In Abs Plastic / Wooden Cabinet.Size Of The Trainer Set 12”X8”. Instruction Manual. 47 Trainer Kit For Op-Amp As Adder, Differentiator And Integrator Instrument Comprises Of Two Dc Regulated Power Supply 0-5V Dc, ±15V Dc, One Meters To Measure Input And Output Voltage & Combination Of Resistance, Capacitors Mounted On Front Panelwith User Manual 48 Convert Digital Data Into Analog Data By Using Analog To Digital Converters And Analog Data Into Digital Data By Digital To Analog Converter Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden Box, Proper Patch Cord With User Mannual.Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden / Metal Enclosure 49 Simulate Differential Protection Scheme For Transformer With Power System Simulation Kit-3-Phase, 415V, 50Hz, Ac Supply. Control Supply : 1-Phase, 230V, 50Hz, Ac Supply. Short Circuit Protection : Hrc Fuses & Mcb. 3-Phase, 3Kva, 415 / 240V, Delta / Star Connected Transformer With Tapings Primary : 0-10-20-100% Secondary - 0-10-20-100% On Each Phase Of Windings, Natural Air Cooled. • Protection Cts : Primary Side Cts 10 / 1A, 5 Va, Cl-1, Wound Primary Typesecondary Side Cts 20 / 0.67A, 5Va, Wound Primary Type. • Fault Simulating Switches : 32A, 2-Pole, On / Off Rotary Switches Are Provided For Creating A ) Line To Ground Fault, B ) Line To Line Fault, C ) Inter-Turn Faultprotective Relays. % Differential Relay Static Type-With Minimum Basic Setting Biased Feature 10%, 20%, 30%, 40%, 50% Setting For Current. Ct Rated 1A Definite Time Over Current Relay • Earth Fault Relay • Aux. Supply To Relay : 110 / 220 V Ac / Dc Educational Bench Model With Schematic Diagram Of The Test Circuit Printed On The Model Test Points & Measurement Points Brought Out & Connected To Terminals, Circuit Setup For Testing Through Interconnections Of Patch Chords With User Manual 50 D.C. Compound Motor ( Open Type ) - 2 Hp- Dc Compound Motor: 2H.P. 1500Rpm, 230V, Open Type For Assemble And Dismantling Of Different Parts Of Stator And Rotor, Commutator, Brush Etc. 51 D. C. Shunt Generator- For O.C.C. Test-Dc Motor:- 2Hp, 1500 Rpm., 220V Dc Generator:- 1Kw, 1500 Rpm, 220V. Necessary Panel To Set Up With Foundation, Voltmeter:0-300V, Ammeter: 0-5A, Ammeter:0-1A, 4-Point Dc Starter. 52 Dc Motor Speed Control System With Power Supply & Motor-Motor 0.5 Hp, Variable Dc ( 0-230V ) Source, Built In Techogenerator, Digital Panel Meter, Power Circuits Of 4 Scrs ( 1200V., 25 A ) I.E. Half Bridge, Facilities Of Studying Torque Speed Characteristics Of Dc Motor, Torque Measurement, Rpm Indicatorwith User Manual 53 Swinburns Test To Compute Efficiency Of Shunt Generator, 1Hp, 220V, 1500Rpm-D.C. Motor:- 2 Hp, 230V, 1500Rpm, Shunt Field. Suitable Panel Withvoltmeter ( 0-300V ) , And Ammeter: 0-1A, Ammeter:0-5A With User Manual & Proper Setup With Foundation 54 Determination Of Equivalent Circuit Parameters Of A Single Phase Transformer By O.C And S.C Test- Transformer: 1 Kva, 230 / 115V, Variac: 0-270V, Panel With Voltmeter: ( 0-50V ) , Voltmeter ( 0-300V ) , Ammeter: 0 -2A, Ammeter:0-10A, Wattmeter: 0-1200W. 55 Compute The Efficiency Of A Single Phase Transformer By Back To Back Test- Complete Set Upwith User Manual: Ac Power Supply 0-230V At 4A ( Optional ) • Operated On Mains Power 230V, 50Hz +10% Digital / Analog Meters: • Voltmeter 2 Nos. ( For Primary And Secondary ) • Ammeter 2Nos. ( For Primary And Secondary ) • Digital Wattmeter 2Nos. 56 Parallel Operation Of Two Single Phase Transformers To Determine The Sharing Of Load Current, Apparent Power And Real Power- Transformer ( 2 Numbers ) : 1 Kva, 230 / 115V, Panel With Voltmeter ( 0-300V / 150V ) , Ammeter: 0-10A, Variable Resistive Load 115V, 10A, Single Phase. 57 Three Phase Transformer With Provision For The Connection In All Vector Groups ( Stardelta, Delta-Star Etc ) - 3-Phase, 1Kva, 415V / 230V, Transformer With Provision For The External Connection Terminals To Perform All Vector Groups ( Star-Delta, Delta-Star Etc. ) . 58 Isolation Transformer - Single Phase, 1Kva , 3Phase , 415V / 230V Isolation Transformer With Provision To Show Its Function And Testing Of It. 59 Tachometer For Speed Measurement-Digital Photo Tachometer • No Contact Rpm Measurement, Wide Measuring Range From 0.5 To 100, 000 Rpm. , Resolution: 0.1 Rpm ( < 1000 Rpm ) . • The Last Value Can Be Stored Into The Memory Automatically & Be Obtained By Pressing Memory Call Button With User Manual 60 4 Point Starter-For Operational Upto 7.5 Hp Dc Motor, 230Vdc. 61 Ac Variac ( Closed Type ) - Single Phase 8A, 0-270V, Rotary Type 62 Clip On Meter-Clip On ( Digital Led Display ) Type Meter Suitable For Measurement Of ( I ) Ac / Dc Current 5 / 10 / 50Amp, With Zero Set Button ( Ii ) Voltage:600Vac / 500Vdc, ( Iii ) Resistance: 0-10Mohms. 63 The Three Phase Squirrel Cage Induction Motor Setup With Various Starters- Complete Panel With Dol, Star-Delta , Auto-Transformer Starter With 2Hp , 3Phase, 415V , 4Pole, 1500Rpm, Squirrel Cage Induction Motor With Suitable Foundation & User Manual 64 Three Phase Squirrel Cage Induction Motor For Direct Load Test To Plot The Various Characteristics-2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 65 Three Phase Squirrel Cage Induction Motor For No Load And Blocked Rotor Test- 2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 66 Three Phase Squirrel Cage Induction Motor For Speed Control-Applicable Methods: I ) Auto-Transformer, Ii ) Vvvf. Specification: 2Hp , 3Hp , 415V, 4Pole, 1500 Rpm Three Phase Squirrel Cage Induction Motor With Necessary Panel Meters And Equipments. 67 Three Phase Slip Ring Induction Motor With Necessary Panel, Proper Base Foundation - To Measure The Open Circuit Voltage Ratio Of The Three Phase Slip Ring Induction Motor.Specification: 2Hp , 3Ph , 415V, 4Pole, 1500 Rpm 68 Three Phase Alternator For Oc, Sc And Load Test-3 Kva, 415 V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With Dc Motor ( Shunt ) 5Hp, 220 V, 1500Rpm, 4-Point Dc Starter, 3-Phase Variable Resistive Load 220 ( L-L ) , 15A Per Phase, With Necessary Panel, Proper Base Foundation 69 Squirrel Cage 1 Hp, 400V I / M & Stroboscope To Measure Slip- I ) 1Hp, 415V, 3-Ph, 50Hz, 1440 Rpm Squirrel Cage Induction Motor With Loading Arrangement. Ii ) Stroboscope For Frequency 0-6Khz. 70 Three Phase Synchronous Motor-Synchronous Motor:3Hp, 415V, 1500 Rpm, Excitor 220V, Dc Through Slipring, Dc Shunt Generator, 1.5Kw, Rpm, 230V Dc, Regulator Control With Necessary Panel, Proper Base Foundation 71 Synchronization Of 3 Phase Alternators By Synchroscope & 3 Lamp Method-Synchronization Of 3 Phase Alternators: 2- Numbers Of 3 Kva, 415V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With 2-Numbers Of Dc Motors ( Shunt ) 5Hp, 230Vdc, 1500Rpm Alongwith Synchronisation Panel With Synchronoscope, 3-Lamps ( With Fuse ) For Lamp Method, Ammeters & Voltmeters For Dc Motors And Alternator, Digital Frequency Meter, Digital Rpm Meter For Dc Motors, 4-Point Dc Starters For Both Motors, 3-Phase Star Connected Variable Resistive Load, 4-Pole Mcb ( S ) & Variable Dc ( With 2-Pole Mcb ) Field Control For Both Alternators. The Whole Set-Up Needs To Be Equiped With Proper Electrical Protection, Base Foundation, Connector Cables, With User Manual, 72 Stepper Motor Controller Trainer-Stepper Motor Controller Trainer Stepper Motor : Motor Type :Unipolar, Torque : 6 Kg-Cm Phase Current : 0.8 Amp. , Stepping Angle : 1.8° / 0.9° Operating Voltage : 12 V Dc Input Pulse : 5V Ttl Compatible, Test Points :20 Gold Plated With User Manual 73 D.C. Servometer Speed Control -Trainer Kit-Kit For D.C. Servometer Speed Control- Position Control Of A 12V, 1A D.C.Gear Motor ( 50 Rpm ) Provision For Positive And Negative Tacho Generator Feedback Tacho Constant: 2V / 1000 Rpm Approximately Calibrated Dials For Reference And Output Position: Resolution 1° Servo-Potentiometers With Full 360°Rotation Microprocessor Based Waveform Capture / Display Card Built-In 3½Digit Dvm For Signal Measurements Built-In Step Signal And Ic Regulated Power Supplies For Electronic Circuits Separate Unit For Motor In A See-Through Cabinet 220V±10%, 50Hz Mains Operation With User Manual 74 Oil Hydraulic Circuit Trainer Unit: Hydraulic Circuit Trainer Unit Consisting Of Standard Components And Accessories For Carrying Out The Study Of Various Hydraulic Components And Hydraulic Circuits Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals 75 Pneumatic Trainer Kit With Compressor: Unit Is To Be Provided With Standard Mounting Board ( Modular Type ) With All Trainer Kits. All The Products Are To Be Provided With Suitable “One Touch Fittings / Push-In Fittings”.Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make , Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentionedalong With Delivery And Maintenance Kit & Manuals. 2 Hard Copies Of Operation Manual To Be Supplied; Installation, Demonstration And Training Of Faculties Are To Be Given. 76 Air Conditioning Trainer : Standard Specifications To Demonstrate The Basic Functioning Of Air-Conditioning. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manual. 77 Refrigeration Trainer: Standard Specifications To Demonstrate The Basic Functioning Of Vapour-Compression Cycle. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals. 78 Plug Gauge: Plug Gauge, Dimension: 25.4-0.5 Mm, Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned. 79 Refrigerator 190 Lit, Direct-Cool Single Door Refrigerator 80 Analog Rough Balance 0-2 Kg, Pan Shape Rectangle Weight Display Analog 81 Analog Rough Balance 0-5 Kg, Pan Shape Rectangle Weight Display Analog 82 Borosil Burette Fitted With Boroflow, 100Ml 83 Borosil Burette Fitted With Boroflow, 50Ml 84 Borosil Burette Fitted With Boroflow, 25 Ml 85 Borosil 3.3 Glass Beaker With Graduation Marks, 1000Ml 86 Borosil 3.3 Glass Beaker With Graduation Marks, 500Ml 87 Borosil 3.3 Glass Beaker With Graduation Marks, 250 Ml 88 Spylx Burette Stand With Clampboss Head And Rod, Burette Stand With Clampboss Head And Rod 89 Transparent Borosilicate Glass Volumetric Flask, 250 Ml 90 Transparent Borosilicate Glassvolumetric Flask, 500 Ml 91 Borosilglass Rod , Outer Diameter: 7Mm, Length: 205 Mm, Material: Polished 3.3 Borosilicate Glass 92 Test Tube Holder, Material: Wrought Iron, Length: 200 Mm, Maximum Opening: 20 To 25 Mm 93 Spherometer: Minimum Length Of Leg 25 Millimeter, Minimum Diameter Of Leg 4 Millimeter, Pitch Of The Screw 1 Millimeter, High Grade Tool Steel 94 Instrument To Observe The Effects Of Frictions Using Inclined Plane: Consisting Of A Wooden Plane 90X18cm Having Adjustment For Setting The Required Angle Precisely Complete With Frictionless Pulley Linear And Circular Scale Pan A Wheeled Trolley And A Set Of Eight Slide Draws Having Bottom Of Different Materials.Base Board Very Superior Quality Having Thick Teak Wood Base, Fittedwith Glass Plate, Complete With Brass Arc, Leveling Screws Pan , Pulley And Iron N.P Roller Export Quality. Heavy Pattern. 95 Stainless Steel Led Digital Vernier Calliper: Mitutoyo, Made In Japan, Length 6, Vernier Constant 0.01Cm , Made Of Stainless Steel, Measure Internal, External And Height Dimensions , Digital Display 96 Verification Of Kirchoffs Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance -1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 20V, Number Of Led Indicators Available To Indicate Power Input -1, Availability Of Dc Voltmeter Available On Board -Yes, Range Of Dcvoltmeter - 0-30Volt, Availability Of Dc Ammeter On Board- Yes, Range Of Dc Ammeter - 0-50 Ma, Number Of Test Points Provided Onboard To Observe Signals - 14, Necessary Patch Cords Available For Interconnection - Yes, Casing Material - Plastic. Two Round Analog Meters For Voltage & Current Measurement, Components Are Mounted Behind The Panel With Printed Circuit Diagram, Connections Are Brought With 4 Mm Banana Sockets, Instrument Fitted In Highly Shockproof Plastics Box, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Student Instruction Manual Will Be Provided With The Trainer Kit, 97 Instrument To Verify Inverse Square Law Of Radiation Using Photoelectric Effect: Type Of Display For On-Board Measurement- Digital, Availability Of Dc Voltmeter On Board - Yes, Range Of Dc Voltmeter - 0-20Volt, Availability Of Dc Ammeter On Board - Yes, Range Of Dc Ammeter - 0-100 Ma, Number Of Dc Regulated Power Supply With Short Circuit And Overload Protection-2, Voltage Range Of Continously Variable Dc Power Supply -20 Volt, Number Of Potentiometers Provided Onboard - 1, Number Of Test Points Provided In The Circuit To Observe Voltage And Current Signal - 5, On Board Schematic Diagram - Yes, Casing Material-Plastic, Number Of Led Indicators Available To Indicate Power Input - 1, Provision Of On-Board Knob For Adjusting The Voltage - Yes.Wooden Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter. On Board Analog Moving Coil Meters , Galvanometer : 30-0-30, Selenium Photocell Mounted In The Metal Box With Metal Base, Lamp Holder With 60-Watt Bulb With Metal Base, Weight : 1.0Kg Approx.Standard Accessories : Selenium Photocell Mounted In The Metal Box, Wooden Plank With Half-Meter Scale Fitted On It, Lamp Holder With Lamp, Patch Chords, Instruction Manual, 98 Conversion Of Galvanometer Into Ammeter Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 99 Conversion Of Galvanometer Into Voltmeter Kit:Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 100 Ohms Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance- 1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 5 Volt, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board -Yes, Availability Of Dc Ammeter On Board - Yes, Casing Material - Plastic.Ohms Law App: To Verify The Ohms Law: Fitted With Slidingrheostat.Onedcvoltmeter, Mo.65&Onedcammetermo-65, Mounted On The Same Base With Terminals, 4 Mm Patch Cords Are Provided With The Trainer Kit For Interconnections 101 Pn Junction Diode Characteristics Kit: Compleate Set With Inbuilt Power Supply & With Digital Voltmeter & Ammeter Compatible For Both Forward & Reverse Bias 102 Boyles Law Apparatus: Burrete Graduated In Cc ( Or Ml ) With 1.0 Cc / Div. Scale Graduated On Both Sides ( Left & Right ) With Same Marking. Both Open And Closed Tubes Can Be Slided Up And Down Over Aluminium Rod. High Quality Synthetic Tube ( 1.0 M Long ) . One Spare Synthetic Tube. ( Withextra 500Gm Mercury ) . Superiorquality, Open&Closedtypeonemeterlongteakwoodboard Onheavy Metal Base Fitted With Leveling Screws Without Mercury But Complete With Pressure Rubber Tubing & Glass Tubes, Routinequality, Doublerodwithopen& Closedendtubes&Pressuretubing. 103 Instrument To Determine The Moment Of Inertia Of A Flywheel About Its Own Axis Of Rotation: Good Quality Stainless Steel Full Setup.Csi Superiorquality Flywheel With Weights , Comprising Of Carefully Machined And Balanced Cast Iron Wheel And Steel Spindle Is Supported On Ball Bearings In Strong Iron Brackets, Thickness: 4.4 Cm, Diameter :20 Cm, Wall Type With Pointer, With Revolution Counter, Set Ofslotted Weights For Flywheel Complete With Weights Cord And Hook. 104 Instrument For Determination Of Spring Constant Of Horizontal & Vertical Spiral Spring Setup: Stand With Heavy Base, Transparent Scale With Mm Resolution, Horizontal Support For Spring, Brightly Colored Stretch Indicator, Three Springs With Identical Diameter And Length, But Different Spring Constants, Three Of Each Spring Included, For A Total Of Nine Springs: Spring Constants Are 5 N / M, 8 N / M, 70 N / M.Consisting Of 45Cm Long Mirrorscale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand, On Metal Stand With Mirror Scale, Superior On Heavy Base, About 50 Cm High For Taking More Readings, Complete With Weights, Helical Spring: Light Spiral Spring With Pointer, Easy To Work With 50 Gm.Weight Complete With Hook For Hanging 105 Stainless Steel Led Digital Outside Micrometer: Mitutoyo: Made In Japan, 0.25Mm-0.01Mm, Least Count 0.01Mm, Made Of Stainless Steel, Digital Display. 106 Linear Expansion Coefficient Apparatus:- Superiorquality , Height 50 Cm, With Brass Rod, Stainlesssteel Finish A 50 Cm Long Expansion Base With A Built-In Dial Gauge And Thermistor.Three Metal Tubes — Brass, Copper ( 99.5%Cu, 0.5% Te ) , And Aluminum ( 98.9% Al, 0.7% Mg, 0.4% Si ) : 6.4 Mm Outside Diameter. A Foam Insulator To Avoid Heat Loss At The Thermistor Connection Point.Thermoplastic Elastometer Tubing With 6.4 Mm I.D.A Source Of Steam Or Hot Water, Such As The Pasco Model Td-8556A Steam Generator.A Digital Ohmmeter Such As Pasco Model Se9589 To Measure The Thermistor Resistance. Leads Should Have Banana Plug Connectors, Such As Pasco Model Se-9750 Or Se-9751 Patch Cords 107 Gclamp-4 Inchirwin 4 Inch / 100 Mm Record H / D G-Clamp T1204 108 Post Office Box-Post Office Box Of Material-Brass And Coil Manganin, Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing 109 Muffle Furnace-Voltage ~230 V Ac, Insulating Maximum Temperatures 1000 C / 1200 C & Working Temperature 930 C / 1130 C Controlled By Digital Temperature Controller Cum Indicator 110 Digital Conductivity Meter-Electrode : Cell K = 1 – Pvc Sleeved Power Required: 230 V Ac 10%, 50 Hz, 5 Va Or 9 V Battery Standard Conductance: Conductance Of 1.000 M Stirrer Speed: 200 Rpm 111 Redwood Viscometer No.1-Material Stainless Steel Voltage 220 Volt Power Source Electric Frequency 50 Hz Phase Single Phase Accuracy + / - 3 °C Readability + / - 0. 5 Degree Capacity 50 Ml 112 Flash Point Apparatus With Stirrer-Voltage-115 V / 230 V, 50 Hz / 60 Hz Measuring Range- Up To 110 °C 113 Daniel Cell-Copper Vessel Complete With Porous Pot & Zinc Rod Diameter ~ 3.5- 4 Inch 114 Digital Voltmeter-Voltage -50-500 V Ac Accuracy ±10% 115 Arsenic Detection Kit-Reaction Time: 10 Minutes Test Type: Test Strip Colour Comparison Results Duration: Rapid 116 Digital Ph Meter-Resolution: 0.01 Ph Range: 0.0 To 14.0 Ph Temperature Controller Display 3 Digit 117 Cube Mould ( 70.6 Mm ) These Are Used For Casting Cement Mortar Test Specimens For Carrying Out Compressive Strength Test Of Cement As Per Is:516. These Moulds Are Manufactured As Per Is Specifications. The Faces Are Machined Flat Within ±0.02 Mm Tolerance And The Inside Dimensions Are Accurate Within ±0.2Mm. Each Mould Is Supplied With A Base Plate. Mould, Steel, For 70.6Mm Cube As Per Is: 10080-1982 Weight: Must Be 6.5 Kg Or More. Should Be Isi Mark. These Cube Moulds Are Made Of Steel. The Tolerance Between Faces Is Maintained At ±0.1 Mm And Plainness Is +0.03Mm. Cube Moulds Carry Isi Mark 118 Digital Rebound Hammer With Calibraton Anvil ( For Concrete Compressive Strength Analysis In The Field And Material Hardness Testing. ) Should Come With Rechargeable Batteries Including Charger. Capabality Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis. Should Conform To Astm C-805, En 12 504-2, Bs -1881- 202 And Other International Standards. Range:10 To 70N / Mm2 Impact Energy: 2.207 N-M Additionally The Following Minimum Specifications Must Be Met. Should Features 16 Character Digital Read Out And Provide Automatic Calculation Of Mean Rebound Number, Compressive Strength And The Median. Should Come With Rechargeable Batteries Including Charger. Capability Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis Is Required. The Necessary Software And The Required Cables For Connecting To The Computer Should Be Provided. A Calibration Anvil Should Be Provided 119 Ductility Testing Apparatus: Ductility Testing Machine Is: 1208 -1978 For Determining The Ductility Of Asphaltic Bitumen, Native Asphalt, Cut Back Bitumen And Blown Type Bitumen. It Consists Of Three Mould Assemblies On A Base Plate. A Separate Briquette Mould ( Total Length 75 ± 0.5 Mm, Distance Between Clips 30 ± 0.3 Mm, Width At Mount Of Slip 20 ± 0.2 Mm, Width At Minimum Cross Section 10 ± 0.1 Mm, Thickness Throughout 10 ± 0.1 Mm ) For Casting The Specimens Is Also Supplied. A Water Bath Of 10 Litres Capacity With A Perforated Shelf Not Less Than 50 Mm From The Bottom Of Bath And A Thermostat Controller For Heater. The Machine Has Two Standard Rates Of Travel Of 1 Cm / Mnt And 5 Cm / Mnt. The Movable Bracket Can Be Arrested Or Released Without Switching Off The Motor By A Clutch Arrangement. Suitable For Operation On 220V, 50 Hz, Single Phase Ac Supply. 120 Length Gauge Conforms To Is:2386 ( Part-I ) Used For Determination Of Elongation Index Of Aggregate. Length Gauge With Isi Certification Mark Is:2386 ( Part I ) , It Consists Of A Metal Plate On Which 8 Steel Pins Are Vertically Mounted With Specified Distances In Between. This Assembly Is Mounted On A Hardwood Base 121 Colorimeter ( Digital ) : Colorimeter, Equipped With Easy-To-Use Conventional Style Controls, Making It Ideal For Routine And Educational Use. Standard 10Mm Square Cuvettes, Semi-Micro Volume Cuvettes, Flowthrough Or Pour In / Suck Out Cells Can All Be Used With The Standard Sample Holder. Wavelength Range: 400 To 710Nm Wavelength Selection :: 8 In-Built Gelatin Filters: 430, 470, 490, 520, 540, 580, 600 And 710Nm Measurement Ranges:: 0-100%T, 0-1.50Abs, 0.1 To 1000 Concentration Bandwidth:Typically 40Nm Blank Drift:: 2% / Hr After 15 Minute Warm-Up Photometric Linearity :: 1%T Light Source :: Tungsten Filament Lamp Output:: Analogue, 10Mv Per Digit Power: 230V, 50Hz Size ( L X W X D ) :: 300 X 355 X 120Mm Weight:: 3Kg 122 Cod Test Apparatus: Cod Test Sample For Dry Bath Heating. Temperature 5+ 150 ◦C + / _ 1◦ C. Digital Controller With Heating Block. Sample Being Digested Within 2 Hours With Titration Method Bod Bottle Capacity : 300 Ml B.O.D. Incubators Has Been Designed Especially For Biological Oxygen Demand Determination & Other Applications Like General Incubators, Serum Studies & Enzyme Assays Test. We Can Also Customize The B.O.D. Incubators To Suit The Varied Requirement Of The Clients With In Stipulated Time Frame. Inner Chamber Made Of S.S.304 & Outer Chamber Made Of M. S. Powder Coated Full Length Inner Acrylic Door Permit Inspection Of Specimens Without Disturbing The Tem. Temp Controlled By Solid State Digital Controllers Housing All The Control With Pt-100 Sensor Illumination Light Are Provided For Viewing With Door Limit Switch. Cfc Free Hermetically Sealed Compressor Provide Temp. For Below Ambient Condition. Air Circulation Fan For Maintain Temp. Uniformity Throughout The Chamber. The Chamber Is Provided With Modular Removable Shelves Made Of S. S. For Complete Flexibility In Use. To Work On 230 Volts 50 H2. 123 Validation Protocols : Iq Oq & Pq Documentation With Calibration & Tradability Certificate Of Controller. Safety Features : Built In Temp Deviation Audio Visual Alarm, Safety Thermostat For Overshoot Temp. Cut Off System. Hrc Fuses For Compressor Heater & Mains Time Daily Circuit For Safety Of Compressor. This B.O.D. Incubator Is Available In Below Sizes: Size= 6Cu.Ft Inner Dimension W X D X H = ( 50 X 50 X 70 ) Cm Capacity= 175 Ltr No. Of Shelves= 2 124 Colony Counter: Working Temperature 5 To 50 ◦ C, 4 Digit Red Led Display, Petridish Holder, Fluorescent Lamp, Zero Reset Button, Dimension-30 ( W ) X33 ( D ) X10 ( H ) Cm, Net Weight 6.5 Kg. 125 Digital Nephelometer ( Turbidity Meter ) :Conformance:: Iso 7027 ( Ir Source ) Epa 180.1 ( Tungsten Lamp ) Measurement Range:: Auto-Ranging From 0 - 1000 Ntu Principle:: Nephelometric Non Ratio Accuracy:: + / - 2% Of Reading Plus 0.01 Ntu Resolution:: 0.01 Ntu ( 0 - 9.9 Ntu ) , 0.1 Ntu ( 10- 99 Ntu ) , 1 Ntu ( 100 - 1000Ntu ) . Response Time: < 6 Sec Display:Lcd , 3 Digit Light Source: Tungsten Filament Or Ir - Led ( 860Nm ) Power Supply: 120 - 240 Volts Ac Sample Cells: 30 M Shipping Dimensions :: 27.3X25.4X9.5Cm ( 10.7 X 10 X 3.75 ) Shipping Weight:: 1.92 Kg ( 2.9Lbs ) 126 High Volume Air Sampler: High Volume Sampler ( With Gaseous Attachment ) Technical Specifications :Flow Rate: - 0 To 1.8 M3 / Min Free Flowparticle Size: - Particles 0 To100 Microns & Below Collected On Filter Paper Holder. Spm Bigger Than 100 Microns Collected In A Separate Sampling Bottle Under The Cyclone. Sampling Time: - 24 Hours... 127 Low Volume Air Sampler: State Of The Art Microprocessor Electronics Flowrate And Volume Totalizations Displayed Are Temperature And Pressure ( 4 Options Available ) Classical Stp 0ºc, 760 Mmhg Normal T And P 20ºc, 760 Mmhg Modified Normal T And P 21.1ºc, 760 Mmhg Standard Ambient T And P 25ºc, 760 Mmhg Elapsed Time Meter Auto Zero Calibration Feature Of Flow Sensor Bright Led Display Flow Rate Accuracy Within ± 4% F.S. Rs-232 Communication Port W / Operator Selectable Download Frequency For Real-Time Data Auto Shut-Off On Time Or Volume 110 – 120 Vac, 50 / 60Hz; Single Phase 128 Hydraulic Bench: Top Tray: Size 1000 X 700 X 100 Mm ( Approx ) Water Circulation: 1 Hp Pump. Flow Measurement: Using Measuring Tank, Capacity 40L. Sump Tank: Capacity 100 Ltrs. Control Panel Comprises Of: Standard Make On / Off Switch, Mains Indicator, Etc The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure 129 Crushing Value Test Apparatus: Consists Of M.S.Cylindrical Container 150 Mm ±0.5Mm Dia X 130Mm To 140Mm High With Base Plate 200 To 230 Mm. / Sqr X 6Mm Thick. A Plinger Of 148Mm ± 0.5Mm Dia X 100 To 115Mm High. Supplied Complete With Tamping Rod, 16Mm Dia X 600Mm Long, One End Rounded. And 1 No. Metal Measure 115 ± 0.5Mm Dia X 180 0.5Mm High. Consists Of Both End Open Cylinder, Base Plate, A Plunger 130 Digital Ph Meter: Measuring Range Resolution Accuracy Ph Range 0 To 14 Ph ( Min. ) 0.001 Ph ± 0.002 Ph Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Rel. Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Temperature Mtc -10.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Atc -5.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Compensation :Automatic And Manual Temperature Compensation Display : It Should Have Thin Film Transistor ( Tft ) Display Of More Than 4 Inch Color ( Blue / Red / Green / Yellow ) Display For Better Vision Of Readings With Clear And Well Arranged Icons Of Parameters Like Ph, Temperature, Mv, Date & Time Etc. Ingress Protection Level : It Should Be Ip54 Complied Protection Level. Power Requirements : It Should Be Operable With 9 -12V / 10W Dc Adapter.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
18.
Public Administrative Department #10234709 Price Bid
Comprehensive In Situ Ecological Rejuvenation Of Shashtrinagar Pond Through Nature Based Solution Through Resurrection Of Native Ecology For Restoration Of Ecosystem Service- 1 Installation and Operation of fresh Water tank (1 x 2000 Liters) and arrangement of Fresh Water for amalgamation of Cownomics® herbal concentrate, inlet-outlet pipelines at the Lake site like to perform Resurrection, Restoration and Rejuvenation process. (Lumpsum) 2 Procurement of Equipment for collecting of MSW, floating particles in Waterbody including: Boats, Safety Jackets, Floating Waste Catchers, Dump Carts, Trapping Nets, Tullu pumps, Foliar Sprayers, Watering Pipe etc. During contract period (Lumpsum) 3 SOIL ECOLOGY RESURRECTION, NATURAL BEAUTIFICATION & PROTECTION:Excavation of solid waste and Construction & Strengthening of embankment of the pond, adhering to the basic ecological theme, without any cement or brick work. All material to be used should be green, natural and biodegradable.Naturally Applied Vegetation Products (Flat/Slope Area): •Native Species Plantation •Landscaping •Watering & Gardening (using pond Water only), Installation/Erecting/Augmentation of Pillars with Galvanized Wires at inner/outer periphery, Solar Poles with Lights, Cemented Benches, Entrance Gate and Ghats etc. (Lumpsum) •Hedge plantation (e.g. bamboos, vetivers, Acacia fernesiana, Plumeri, Euphorbia antiquorum (Tridhara), Lawsonia inermis (Henna/Mehandi), Bougainvillea spectabilis, Morpankhi (Thuja), Pedilanthus tithymaloides (Devil’s backbone), Hedera helix (English ivy), Duranta repens (Duranta), Clerodendrum inermis (Vilayti Mehendi), Lantana Camara species, Carissa carandas (Karonda), Hamelia patens (Firebush), Mussaenda Species, Jatropha curcas (Mogli Erand, Biodiesel), Tecoma (Trumpet bushes), Murraya paniculata (Kamini, Kunti) etc.) for creating a natural barricading of the Waterbodies for restricting human intervention activities like throwing of plastics and solid waste etc. The same can be used by the birds for nesting purposes and biodiversity conservation too. (Lumpsum) 4 Installation and Augmentation of Municipal Solid Waste (MSW) Filtration & Collection Channel System at the confluence of the Pond and Drains (Lumpsum) 5 Initial Six (6) months of Resurrection and Restoration of Native Ecology of Pond through In-Situ Ecological Technology: The Resurrection: the complete treatment process is focused upon resurrecting the native microbiota of the wetland / Waterbody. The phase lasts for a period of three (3) months, during this phase the foul smell & the mosquito population dwelling in the Waterbody gets eradicated. I laboratory reports, there’s a substantial improvement show in the TDS, TSS and COD values. The Water viscosity gets reduced, color becomes lighter and the transparency improves. Waves are back the still water in this phase itself.The Restoration: In this phase, because the native microbiota is already resurrected, the focus now shifts towards reestablishing the soil capillary link to aquifer through complete consumption of the sludge deposits. From the surface, the Water level appears to be lowering down or receding. Some people might take it as drying of Water, but that’s no the real process. The sludge deposited in the bottom, is getting consumed and digested due to the eco-dredging process and Water is reclaiming the space. Thus, the more sludge gets consumed, the deeper the waterbody will become. Basically, we can call it “Restoration of the Water holding capacity of the Waterbody. Again, the phase lasts for three (3) months. 6 12 months of Rejuvenation of Native Ecology of Pond and conservation of Bio-Diversity through In-Situ Ecological Technology: During Rejuvenation process Waterbody will perform and deliver following services:1- Waterbody will be perennial, free from foul smell and mosquitoes.2- Aquatic life will be reinstated along with aquatic food chain.3- Rain Water harvesting & aquifer recharge will get reestablished.4- Air pollution mitigation will restart naturally, which can be measured scientifically through equipment’s.5- Native ambient temperature in the vicinity shall be restored.Note: aftre 12 months of the treatment the Water Quality of the treated waterbody shall be equivalent to outdoor bathing quality standrads, i.e., DO above 5, BOD below 10, COD below 30, FC below 5, ORP with negative values, or the IS:2296 Class B, of ourdoor bathing quality. 7 Monthly Water Sampling & Testing for various parameters for initial and rejuvenation treatment period.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
19.
Science and Technology #10227634 Price Bid
Tender For Rate Contract Of Lab Consumables For Instruments - 2 Hplc Sample Vials 3 Hplc Column, Rp-18 / Ods 4 Auto Sampler Vials For Hplc Precast With Ptfe / Red Rubber / White Silicone Septa. 5 Deuterium ( D2 ) Lamp For Hplc ( Make : Thermo ) 6 Tungsten-Halogen Lamp For Hplc ( Make : Thermo ) 7 Micro Litre Syringe 8 Micro Litre Syringe 9 Syringe For Gc-Ms For Manual Injection On Spilt And Splitless Injectors / Liners 10 Syringe For Gc-Ms For Manual Injection On Spilt And Splitless Injectors / Liners 11 Syringe For Gc-Ms For Manual Injection On Spilt And Splitless Injectors / Liners 12 Syringe Gas Tight 13 Graphite Ferrules For Gc Capillary Column 14 Graphite Ferrules For Gc Capillary Column 15 Liners For Gc, Split Straight Liner 16 Liners For Gc, Split Straight Liner 17 Liners For Gc, Split Less Straight Liner. 18 Liners For Gc, Split Less Straight Liner 19 Graphite Sealing Ring For Inletliners 20 Septa Bto ( Low Bleed Silicone For Inj. Ssl ) Compatible With Thermoscientific Instrument ( Trace Gc And Ultra Gc ) 21 Head Space Crimp Vial 22 Aluminium Caps For 20Mm Hs Vials Headspace Cap , Locquvered With W / High Persepta 350 A H6 / 281Ads 23 Filament Assembly For Gc-Mass Spectrometer, Make: Thermo, Model: Dsq 24 Filament Assembly For Gc-Mass Spectrometer, Make: Agilent 25 Gc Capillary Column, Tg-5 Ms 26 Gc Capillary Column, Db-1 27 Gc Capillary Column, Hp-1 28 Gc Capillary Column, Db-5 29 Gc Capillary Column, Hp-5 30 Gc Capillary Column, Tr-35 31 Gc Capillary Column, Trace Tr 8095 ( Gc Column For Explosives ) 32 Gccapillary Column, Tr-5 Ms 33 Gc Capillary Column, Tr V1 34 Gc Capillary Column, Ec-5, Econo Cap 35 Gc Capillary Column, Ec-1, Econo Cap 36 Gc Capillary Column, At -1, Heliflex 37 Gc Capillary Column, Ec –Wax, Econo Cap 38 Gc Capillary Column, Bpx-5 39 Capillary Tube / Column Cutter 40 Trace Ssl 41 Trace Ssl 42 Trace Ssl 43 Trace Ssl 44 O.D. Liners Graphite Ring 45 Trace 46 Trace 47 Trace 48 Trace Ssl, Ms Side Ferrule 49 Trace Ssl, Ms Side Ferrule 50 Trace Ssl, Ms Side Ferrule 51 Split / Split Less Bto 52 Packed Bto 53 Large Volume Sl Bto 54 Transfer Line O-Ring 55 Sample Assay Cups For Dip ( Model Dsq Make Thermo Mass Spectrometer ) 56 S.S. Gas Tubing 57 S.S Nuts ( For Fitting Of Gas Tubing 1 / 8 Inches ) 58 Ss Retaining Ring ( Front & Back Ferrule ) For 1 / 8 Inches Gas Tubing 59 Microparticulate Filters For Helium 60 Microparticulate Filters For Hydrogen 61 Microparticulate Filters For Nitrogen 62 Microparticulate Filters For Air 63 Double Stage Gas Regulator For Helium / Air / Nitrogen 64 Double Stage Gas Regulator For Hydrogen 65 Gas Purification Panel For He, Air, Hydrogen And Nitrogen Gases 66 Manifold For Two Cylinders With Bracket 67 Pigtail 68 Vacuum Pump Oil 69 Gas Control Box For Helium Gas 70 Gc Column, Carbowax ( For Nucon Glc ) 71 Gc Column, Se 30 ( For Nucon Glc ) 72 Gc Column, Porapak-Q ( For Nucon Glc ) 73 Silicone Rubber Septum ( For Injector Port Of Packed Column Ofnucon Glc ) 74 Platinum Sensor For Fid Temperature 75 Platinum Sensor For Injector Temperature 76 Fid Control Module 77 Injector Cap For Gc 78 Fid Base Body Blocks S.S. With Jet And Gas Connection 79 Injector Liner For Packed Column 80 Gas Purifier / Filter Purifier / Moisture Trap 81 Oxy Trap 82 Gas Panel For Operating One Gc System 83 Gas Panel For Operating Two Gc System 84 Double Stage S.S. Diaphragm Chrome Plated Pressure Regulators 85 Graduated Glass Soap Bubble Flow Meter 86 Gas Connectingtubing: Copper 87 Gas Connectingtubing: Stainless Steel 88 Cuvette ( Quartz Make ) For Uv- Visible Spectrometer 89 Cuvette ( Glass Make ) For Uv- Visible Spectrometer 90 Deuterium Lamp For Uv- Visible Spectrometer ( Make : Lab India, Model 3092 ) 91 Filter Wheel For Uv- Visible Spectrometer ( Make : Lab India, Model 3092 ) 92 Tungsten Lamp For Uv- Visible Spectrometer ( Make : Lab India, Model 3092 ) 93 M 1 Lamp Mirrorfor Uv- Visible Spectrometer ( Make : Lab India, Model 3092 ) 94 Deuterium Lamp For Uv- Visible Spectrometer ( Make : Lab India, Model 3200 ) 95 Deuterium Lamp For Uv- Visible Spectrometer ( Make : Lab India, Model 3000+ ) 96 M 1 Lamp Mirrorfor Uv- Visible Spectrometer ( Make : Lab India, Model 3000+ ) 97 Filter Wheel For Uv- Visible Spectrometer ( Make : Lab India, Model 3000+ ) 98 Tungsten Lamp For Uv- Visible Spectrometer ( Make : Lab India, Model 3000+ ) 99 Microlitre Dosing Syringe For Hptlc 100 Microlitre Dosing Syringe For Hptlc 101 Microlitre Filling Syringe For Hptlc 102 Microlitre Filling Syringe For Hptlc 103 Deuterium Lamp For Hptlc 104 Tungsten Lamp For Hptlc 105 Mercury Lamp For Hptlc 106 Dessicant Cartridges For Ftir 107 Ss Die Set For Sampling In Ftir ( Kbr Pellet Formation ) 108 Gd / X Syringe Filters ( Three Layer Pre Filter ) For Hplc, Gc-Ms, Glc, Uv Etc. Sample Preparation. 109 Gd / X Syringe Filters ( Three Layer Pre Filter ) For Hplc, Gc-Ms, Glc, Uv Etc. Sample Preparation. 110 Gd / X Syringe Filters ( Three Layer Pre Filter ) For Sample Preparation For Hplc, Gc-Ms, Glc, Uv Etc. 111 Gd / X Syringe Filters ( Three Layer Pre Filter ) For Sample Preparation For Hplc, Gc-Ms, Glc, Uv Etc. 112 Gd / X Syringe Filters ( Three Layer Pre Filter ) For Sample Preparation For Hplc, Gc-Ms, Glc, Uv Etc. 113 Gd / X Syringe Filters ( Three Layer Pre Filter For Sample Preparation For Hplc, Gc-Ms, Glc, Uv Etc. 114 Gd / X Syringe Filters ( Three Layer Pre Filter ) For Sample Preparation For Hplc, Gc-Ms, Glc, Uv Etc. 115 Gd / X Syringe Filters ( Three Layer Pre Filter ) For Sample Preparation For Hplc, Gc-Ms, Glc, Uv Etc. 116 Gd / X Syringe Filters ( Three Layer Pre Filter ) For Sample Preparation For Hplc, Gc-Ms, Glc, Uv Etc. 117 Gd / X Syringe Filters ( Three Layer Pre Filter For Sample Preparation For Hplc, Gc-Ms, Glc, Uv Etc. 118 Syringe Less Filter ( Mini-Uni Prep ) 119 Syringe Less Filter ( Mini-Uni Prep ) 120 Syringe Less Filter ( Mini-Uni Prep ) 121 Syringe Less Filter ( Mini-Uni Prep ) 122 Syringe Less Filter ( Mini-Uni Prep ) 123 Syringe Less Filter ( Mini-Uni Prep ) 124 Membrane Filters 125 Membrane Filters 126 Membrane Filters 127 Membrane Filters 128 Tlc Developing Tank , Rectangular, Glass Tank With Lid 129 Dual Slot Tlc Developing Chamber For 20X20 Cm Plates 130 Tlc Spray Box 131 Spray Unit, Prival 132 Tlc Sprayer, 125 Ml 133 Flask Type Sprayer 250Ml, 134 Tlc Silica Gel 60 F254aluminum Sheet 135 Tlc Silica Gel 60 F254aluminium Sheet 136 Tlc Silica Gel 60 F254 Glassbacked Layer 137 Tlc Silica Gel 60 F254 Glassbacked Layer 138 Tlc Silica Gel 60 Aluminum Sheet 139 Tlc Silica Gel 60 Aluminum Sheet 140 Tlc Silica Gel 60 Glassbacked Layer 141 Tlc Silica Gel 60 Glassbacked Layer 142 Hptlcplates, Silica Gel 60 143 Hptlcplates, Silica Gel 60 144 Hptlcplates, Silica Gel 60 145 Hptlcplates, Silica Gel 60 146 Hptlcplates, Silica Gel 60 F254 147 Hptlcplates, Silica Gel 60 F254 148 Hptlcplates, Silica Gel 60 F254 149 Immersion Oil Forolympus Bx 50 Microscope [ Viscosity 135Mm 2 / S, Refractive Index Ne=1.518 ( 230C ) ] 150 Immersion Oil For Leica Dm 2500 Microscope [ Viscosity 825 Mm 2 / S At 230C, Optical Characteristics- Ne ( 546, 1 Nm ) -1, 5180, Iso 8036 ] 151 Immersion Oil For Microscopy [ Viscosity ( 20°C ) 1000- 2000 Mpa’S , Refractive Index N=1.515- 1.516 ( 200 / D ) ] 152 Ashless Filter Paper Circles 153 Ashless Filter Paper Circles 154 Ashlessfilter Paper Circles 155 Ashless Filter Paper Sheet 156 Ashless Filter Paper Sheet 157 Ashless Filter Paper Sheet 158 Filter Paper Circles 159 Stainless Steel Filter Holder 160 Stainless Steel Filter Holder 161 Glass Insert Oci / Liners 162 Glass Insert Spl2010 / Liners 163 Glass Insert Sless / Wvi / Liners 164 Polystyrene Vials ( For Alcohol Analyser ) 165 Caps For Polystyrene Vials Of 50 Ml Capacity ( For Alcohol Analyser ) 166 Jet Opener For Fid 167 Triple Filter ( O2 / H20 / Hc ) 168 Crimper 169 Piston Oil For Diesel Analyzer 170 Filling Membrane For Diesel Analyzer 171 Metallic Filter For Diesel Analyzer 172 Fid Collector Assy 173 Filamentassy 174 Igniter Assy Fpd 175 Glass Insert, Packed Gc- 2010 Plus 176 Nozzle Assy, Packed Gc-2010 Plus 177 O-Ring For Glass Insert ( 221-48886 ) Packed Gc-2010 Plus 178 Rubber Septum, Inj. Port 20 / Pkt 179 Deuterium ( D2 ) Lamp For Hplc 180 Split Glass Insert For Injector With Wool 181 Microliter Syringe 182 Filament D Assy 183 Injection Port Septa 184 Reversed -Phase ( Rp ) Modified Silica Tlc Plate- Rp-2 ( 20X20cm ) Aluminum Backed 185 Reversed -Phase ( Rp ) Modified Silica Tlc Plate- Rp-8 ( 20X20cm ) Aluminum Backed 186 Reversed -Phase ( Rp ) Modified Silica Tlc Plate- Rp-18 ( 20X20cm ) Aluminum Backed 187 Doa-1124, Urine Dip Cards—Multi-Drug One Step Screen Test Panel 188 Doa-174, Urine Dip Cards—Multi-Drug One Step Screen Test Panel 189 Etg Urine Test Drug Screen Cassette, Etg Rapid Test Cassette
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Rajasthan View Result →
20.
Health and Family Welfare #10220033 Price Bid
Supply Installation Of Machinery/ Equipment, Medical Gad Pipeline Work And Other Essential Items. , List Of Machine And Equipment , Vertical Blinds Providing And Fixing White, Semi-Transparent, Roller Blinds/ Vertical Blind 100 Mm, All Complete, With All Fixing Mechanisms, In Specified Color/Texture/Screen, As Per Attached List, All Complete With Installation& Testing , Dirty Linen Trolley • Heavy Steel Frame Mounted On Four 100 Mm Heavy • Duty Pu Swivel Castors; Two With Brakes. • Two Multipurpose Shelves With One Top Tray With Three Sides Safety Rails. • Provided With One Canvas Bag. • Size: 18 L X 18 W (Shelves) X 35 H + 18 L X 18 W (Canvas Bag). • Finish: Pre-Treated & Epoxy Powder Coated. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Floor Cleaning Trolley • Trolley Having 3 Bin • Capacity Of Each Bucket 25 Liter • Long Handle For Easy Handling. • With A Utility Bin And Mop Holder. • The Frame Of The Trolley Must Be Of Stainless Steel , Waste Bucket-Ss Small For Each Bed • Perforated Dustbin Without Lid • Material: Ss • Capacity :6 Liter • Size: 7 Inch X 10 Inch • Certification- Iso 13485:2016, Iso 14001 , Mayo Trolley • Specially Designed Instrument Trolley For Cross Over The Table. • Height Adjustable Manually Through Knob. • Complete Stainless-Steel Structure With Fixed Stainless • Steel Instrument Tray With Three Sides Safety Rails. • Mounted On Four 100 Mm Heavy Duty Moulded Pu Castors; Two With Brakes. • Size: 36 L X 24 W X 32-48 Height Adjustable. • Finish: Well-Polished Stainless Steel. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Refrigirator • Direct-Cool Refrigerator; 235Litres • Energy Rating: 5 Star • Warranty: 1 Year On Product, 10 Years On Compressor • Smart Inverter Compressor • The Revolutionary Smart Connect Technology In Lg Direct Cool Refrigerator Helps You Connect Your Refrigerator To Home Inverter In Case Of Power Cuts • Moist ‘N’ Fresh Is An Innovative Lattice-Patterned Box Cover Which Maintains The Moisture At The Optimal Level • Spill Proof Toughened Glass Shelves • Stabilizer Free 90V To 310V , Water Cooler Providing And Fixing 150 Litre/ Hr. Cooling And Storage Capacity, Fully Stainless Steel Electric Storage Type Water Cooler ( Blue Star Model No. Sdlx 15150 Or Equivalent) With Inlet Hose Connection Inbuilt Float Valve. 2 Nos. Outlet Faucet, Drain Tray With Waste And Pipe Up To Floor Trap Heavy Compressor And Wire Up To Socket, 3 Pin Plug Etc Complete In All Respect. , Track System • Strong Aluminum Track With Whit Powder Coated Finish • Curtain Of Polyster Fabrics Water Repellent And Stain Retardent • Curtain Size : 4 X 7 Feet • With All Other Accessories To Cover Each Bed , Iv Tree System • Heavy Duty 5 Bag Holder • Heavy Duty Self Locking Wheeled Trolleys • Five Point Telescopic Carrier Tree • Made Of Stainless Steel Ss304 And Aluminium With White Powder Coatint On It & Hook Are Of Ss304 • Strong Aluminum Track With Whit Powder Coated Finish • Track Suspended At Cubicle Track Height. • With All Other Accessories For Each Bed , Medical Gas Pipeline System Certification-Iso 9170-1:2008, Iso 10524-1:2006, Iso 7396-1:2016, Iso 5359:2014, Iec 60601-1-8:2006, Ce, Iso 80601-2-13:2022, Iso 15002:2008, Iso 21969:2009. , Fully Oxygen Mainfold (Without Cylinders) • Supply, Installation, Testing And Commissioning Of Fully Oxygen Manifold 8+8 , Fully Automatic Oxygen Control Panel For Main Fold • Supply, Installation Testing And Commissioning Of Fully Automatic Oxygen Control System, As Per Htm/ Iso7396/ Nfpa-99 Standard And Ce Certified Under Class Ii Medical Directive 93/42/Eec From Notified Body Or Ul/Atl Listed , Oxygen Emergency Mainfold System (Without Cylinders) • Supply, Installation, Testing And Commissioning Of Emergency Oxygen Supply System 2+2 , Oxygen Flow Meter With Humidifier Bottle • Supply Installation, Testing And Commissioning Of Oxygen Flow Meter With Humidifier Bottle 0-15Litres, And Cemarked Under Medical Directive 93/42/Eec , Gas Outlet For Oxygen • Supply, Installation, Testing And Commissioning Of Gas Outlet Points With Probe For Oxygen, Nitrous Oxide, Air, & Vacuum As Per Technical Specification As Per Htm/ Iso 7396 Standard And Ce Certified Under Class Ii , High Pressure Tubes Color Coded • Supply Installation Testing And Commissioning Of High Pressure Tubes Duly Colour Coded For Oxygen , Nitrous Oxide Compressed Air And Vacuum As Per Technical Specification And As Per Htm/ Iso 7396/ Nfpa-99 Standardand Ce Marked. , Medical Grade Copper Pipe Line • Supply,Installation Testing Commissioning Of Medical Gradecopper Piping Bsen : 13348 Lloyds Certified , 42Mm Odx1.2Mm Thick , 28Mmodx 0.9Mm Thick , 22Mmodx 0.9Mm Thick , 15Mm Odx0.9Mm Thick , 12Mm Odx0.7Mm Thick , Zonal Valve Box • Supply, Installation, Testing And Commissioning Of Zonevalves Boxesas Per Technical Specification. The Isolation Valves Used For The Shall Be Degreased For Oxygen Use 1 Gas Services , Medical Gas Alarm Panel • Supply, Installation, Testing And Commissioning Of Medical Gas Alarm Panel As Per Tender Specificationsas Per Htm/ Iso 7396/ Nfpa-99 Standard And Ce Certified Under Class Iimedical Directive 93/42/Eec From Notified Body Or Ul/ Atl Listed. , Master Alarm Panel , Area Alarm Panel , Line Isolation Valves • Isolation Valve , Degreased For Oxygen Use As Per Htm/ Iso 7396/Nfpa-99 Standardand Ce Certified Under Class Ii Medical Directive 93/42/Eec From Notified Body Or Ul/Atl Listed , 42Mm , 28Mm , 22Mm , 15Mm , 12Mm , Bio Medical Waste Trolley • Three Compartment Waste Segregation System. • Stainless Steel Trolley On Castors. •Foot Operating System For Opening Of Lid. •Bins Can Be Interchanged As And When Required. • For Bin Sizes 30 Ltrs , Bio Medical Colored Bin • Washable / Autoclavable • Lateral And Central Handles Tested For Twice The Max Weight. • Solidity & Resistance Against Shock At Both Low And High Temp. • High Penetration Resistance. • The Bins Comply Un And Nfx Standards Of Safety. • Bin Size 30 Ltrs , Bio Medical Colored Bags • Biodegreadable •Environment Friendly •Chlorine Free •Meets All Bmw Disposal Norms • Size As For 30 Ltrs Bin , Oxygen Concentrators • Flow Rate: 0-5/Min/0-10L/Min • Purity: 93+3% • Outlet Pressure: 0.04-0.07 • Sound Level: <- 50Db • Power:Ac230v, 50Hz (Ac220v/110+-10%, 50/60+-1Hz Are Available) • Power Consumption: <-480W • Lcd Display : Switch Times, Operating Pressure, Present Working Time, Accumulating Time, Presenting Time From 10Mins To 40 Hours • Alarm : Power Failure Alarm, High & Low Pressure Alarm • Net Weight : 25Kgs • Size (Mm):365X375x600 • Certification- Iso 13485, Ce , Fingure Tip Pulse Oximeter • Display Type : Led Display • Spo2 Measurement Range: 35-99% • Pulse Rate Measurement Range: 30-240 Bpm • Accuracy : +-1 Bpm • Operating Temperature : 0 Deg C – 40 Deg C • Product Dimension: 30X65x40mm • Certification- Ce, Iso13485 , Defibrillator D-Fab • Display: 7” Colour Tft • Display Area: 150Mmx 90Mm • Dimension: 14280 X W 330 Xd220mm (Max) Without Paddle • Alarm : 24 Hrs Graphical And Tabular Trend Of Ecg, Spo2, Nibp Esco2 Defib (External Paddles) • Operating Mode : Manual • Waveform: Biphasic Truncated Exponential • Energy : 2 To 200 Joules In 12 Steps Selection Heart Rate • Range: 10-250 Bpm • Accuracy : +- 2 Bpm • Resolution:1 Bpm • Alarm Limit Setting: 10-250 (Step Of 1) Ecg • Frequency Response : 0.5 Hz To 35 Hz • Lead Selection :Lead I,Ii And Iii • Gain Setting:0.5 1.0 And 2.0 • Cmrr :> 90 Db • Sweep Speed:12.5, 25.0, 50.0 Mm Sec Power Supply • Input:150-276 Vac, 50 Hz, I O • Battery :12V 4.5Ah, Rechargeable, (Sealed Lead Acid) • Back-Up Time: 3 Hours Min, On Full Charge In Ecg Mode 70-100 Shoeof 150 Joules Delive(Full Charge) • Power Consumption : 30 Watts (Max.) In Ecg Mode Aed Mode • Wave Form : Biphasic Truncated Exponential • Aed Shock Series:Energy Level 200J Environmental • Operating Temp : -5 Degree Celsius To +50 Degree Celsius • Humidity: Up To 95 % Non-Condensing • Certification- Iso 13485, Ce , Suction Apparatus – Foot • Portable And Lightweight Design For Easy Transport & Use In Various Settings. • Operates Using A Foot Pedal Instead Of Electricity, Making It Suitable For Use In Locations Without Access To Power Sources. • Can Generate Sufficient Suction Pressure For Medical Procedures Such As Wound Care, Tracheostomy Care & Airway Clearance. • Easy To Clean & Maintain, With Minimal Parts & Components That Require Servicing. • Durable Construction To Withstand Repeated Use In Clinical Environments. • Adjustable Suction Levels To Accommodate Different Patient Needs & Procedures. • Compatible With A Variety Of Suction Canisters And Tubing For Versatility In Use. • Cost-Effective Alternative To Electric Suction Machines, Particularly In Resource-Limited Settings. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Ecg Machine Features • 7 Inch Tft, Touch Screen, Led Back Light • Digital Information Technology And Signal Processing Solution, Digital Filter •Patient Management, Name Age And Id. Detail Analysis Report. •Built In Lithium Rechargeable Battery, Wide Thermal Printing System. • Usb And Lan Socket. • Memory: Built-In Memory Or Mini Sd Memory Card. Stores More Than 1000 Pieces Of Archive • Auto-Measurement, Auto-Analysis, And Auto-Interpretation. Technical Parameters • Lead: Standard 12 Leads • Patient Leak Current : < 10Ua • Input Impedance: >= 50M • Frequency Response: 0.05- 150 Hz(-3Db) • Time Constant : >3.28 • Cmrr: > 100Db • Dimension Of Recording Paper: 110Mmx20mtr • Paper Speed: 25Mm/S, 50Mm/S • Sensitivity Choice: 5, 10.20Mm/Mv • Measurement Parameters : Hr, P-R Interval, P-Qrs Duration, Q-T Duration Interval, Q-Tc, P Axis, Qrs Axis, R(V5), S(V1), R(V5)+S(V1) • Product Safety Type: Class I, Cf, Defibrillation, Pacing Protection. • Enduring Polarization Voltage: +/-300,Mv • Nosie Level: < 15Uvp-P • Dimension: 130Mm(L)+74Mm(W)+25Mm(H) • Net Weight : 2.3Kg • Certification- Iso 13485, Ce , Gulucometer • Assay Method- Electrochemistry. • Coding- Auto Coding. No Coding For Easy To Use. • Enzyme Compatibility - Gdh-Fad. • Test Time- 5 Seconds. • Sample Volume- 0.5 Ml. • Sample Type- Whole-Blood, Capillary, Venous, Neonatal. • Reference Type- Plasma Reference. • Memory- 500 Test With Date & Time. • Test Range- 10 To 600Mg/Dl. • Power- 3V Battery Cr 2032. • Universal Check Strips- Should Be Available With Every Meter. • Certification- Ec, Gmp, Iso 9001 (Nabcb) • Customer Care And Service Engineer Availability Is Mandatory. , Gluco Strip • Enzyme- Gdh-Fad. • Manual Coding Requirement- No. • Number Of Strips Packed In Each Container- 50*2 • Certification- Usfda, Iso15197:2015,Eu- Ce, Iso 13485:2016 • Electrode- Gold Layer. • Hct Range- 0 To 70%. • Strips Self Life Months – 24. After Opening Till Expiry Date (Print On Container). • Availability Of Test Report From Central Gov/Nabh/Ilac Accredited Lab. • Control Solution Should Be Available For Sample Testing, Service If Required. • Certification- Ec, Gmp, Iso 9001 (Nabcb) , Lancet • .Fine 30Gauge, Tri-Bevel Tip For Virtually Painless Sampling. • . Consistent Depth Penetration. • .Universal Design Should Be Fit For Most Lancing Device. • . Length - 1.2Mm Width -0.32Mm • .Gamma Radiation Sterilized For Hygiene. • Certification- Ce , Iso13485 , Ambu Bag Adult • Silicon Adult Resuscition Set With Ballow Capacity 1000Ml • Oxygen Reservoir Bag 2600Ml • Disposable O2 Tubing 2 Mtr • Silicon Mask – 2 Nos • In Zip Pouch • Certification- Ce, Iso13485 , Oxygen Cylinder (D Type) With Trolley • Cylinder Water Capacity : 46.7 Liter • Cylinder Oxygen Capacity : 7000 Liter • Weight Of Cylinder: 51 Kg (Approx) • Height Of Cylinder With Valve: 1445 Mm (Approx) • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Wheel Chair • Folding Wheel Chair With Fixed Arm And Foldable Footrest • Chrome Plated Ms Frame. • Superior Quality Wheels • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Weighing Scale Digital • Unit : Kg/Lb • Screen: 74X2.9Cm • Material : Tempered Glass + Abs Plastic • Battery:2Xaaa Batteries • Color :Customized Color • Pattern Type :Silk Print • Thickness Glass:6Mm • Glass Angle :Right Angle • Certification- Ce, Iso13485 , Clinical Thermometers (Digital) • Takes 60 Seconds To Measure Body Temperature. • Can Be Used In Oral Cavity, Rectal, Under The Armpit. • Easy To Read Lcd Display - Toggle To F And C • Beep Sound - Accuracy +- 2 Degree F • Range Of Measurement-89.6 Deg F To 109.2 Deg F • Certification- Ce, Iso13485 , Bp Appapratus (Digital) • Applicable Arm Circumference: 32Cm – 36Cm • Measurement Method : Oscillometric Method • Display Method : Lcd Digital Display • Measurement Range:Pressure 0 Mmhg – 280 Mmhg (0 Kpa -37.3 Kpa) Pulse : 40 Beats/Min -195 Beats/Min) • Accuracy : Pressure : +- 3Mmhg (+-0.4 Kpa) Pulse: Allowable Error +-5% • Power Supply : 4 Aaa Batteries (Dc 6V) • Storage & Transport Environment:Temperature -20 Deg C-55 Deg C • Normal Working Environment:Temperature -5 Deg C -40 Degc • Dimension (Approx.): 120Mm X 110Mm X65mm (L*W*H) • Components Included:Monitor, Arm Cuff, Storage Bag, User • Manual (Warranty Page) • Inflation/Deflation : Automatic • Screen Size/Type: 7.5Cm, 3 Colour Backlit & Pvc Pane • Certification- Ce, Iso13485 , Stethoscope • High Automatic Sensitivity • Soft Sealing Ear Knobs • Two Side Chest Piece • Quality Tubing • Imported Diaphragm • Certification- Ce, Iso13485 , Nebulizer • Power:230V Ac,50 Hz • Maximum Power :75W • Medication Capacity : 5Ml • Particle Size:0.4 To 8 Um • Mmad :4Um • On Time:30 Minutes • Sound Level:70 Dba (1 Meter) • Nebulization Rate:0.2 Ml/Min Or Above • Compressor Pressure Range:28 Psi • Operating Pressure Range:8 To 16 Psi • Compressor Air Output :10Lpm • Operating Temperature Range: 0 To 40 Deg C • Operating Humidity Range: 10 To 75 % Rh • Storage Humidity Range :90 % Rh (Max) • Certification- Ce, Iso13485 , Syringe Destroyer With Needle Cutter • High Temperature Incarnation Of Used Needles To Ensure Proper Disposal And Prevent Needle Reuse. • Easy To Use & Operate With Simple On/Off Switch. • Compact And Portable Design For Convenient Use In Medical Settings. • Built-In Safety Features To Prevent Accidental Burns Or Injuries. • Energy Efficient Operation For Cost Savings And Environmental Sustainability. • Durable Metal Body Construction For Long Lasting Use And Stability. • Sharp Cutting Blade For Precise And Efficient Syringe Cutting. • Compact And Lightweight Design For Easy Handling And Storage. • Easy To Assemble And Disassemble For Cleaning And Maintenance. • Cost Effective Solution For Safe Disposal Of Used Syringes In Healthcare Facilities. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Patient Trolley – Ms • Overall Size : 210L X 56W X 81H Cms • Frame Work Of Mild Steel, • Adjustable Back Rest. • Collapsible Safety Side Railings. • Cylinder Cage. • Removable Stretcher Top. • Pre Treated And Epoxy Powder Coated Finish • Wire Mesh Stretcher Platform. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Equipment Trolley • Strong And Precise Stainless-Steel Frame Made Of Rectangular S.S. Pipes Fixed With Six S.S. Shelves Fitted With S.S. Side Safety Rails On Three Sides Of Each Shelf. • Space Between Five Shelves Can Be Adjustable By One Inch Or Two Inches Or Shelves Can Be Detached As Per Space Required For Different Makes Of Laparoscopy/Endoscopy Equipments. • One Drawer Provided Under The Base Made Of Both Side Laminated Wooden Board With Large Stainless-Steel Handle. • Fitted With Electric Socket Strip Of Eleven Modular Sockets On The Rear Side Of Trolley. • Provided With Detachable S.S. Cylinder Cage At The Rear Side Of Trolley. • Trolley Moveable On Four 125 Mm Heavy Duty Moulded Pu Swivel Castors; Two With Brakes. • Finish: Well-Polished Stainless Steel. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Crash Cart • Crash Cart For Hospital Made With Stainless Steel, Completely Rust-Free Design. •6 Polystyrene Lockable Storage Drawers With Multi Colour Bins. •Available With Castors (Two Casters With Break) •Dimensions – 960Mm(L)X450mm(W)X1580mm(H) •The Inbuilt Oxygen Cylinder Holder And Inbuilt I.V Stand. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Patient Monitor • 12.1 Inch High Resolution Color Tft Lcd Screen. • Thinner And Lighter Design, Convenient And Portable For User, Pace-Maker Detection. • Freeze Instant Waveform For Real Time S-T Segment Analysis. • Real Time S-T Segment Analysis, Pace-Maker Detection. • 3-Level Audio Visual Alarming. • Efficient Resistance To Interference Of Defibrillator And Hf Knife. • Lasting Working Capacity With Built-In Rechargeable Lithium Battery. • 400 Groups Of Nibp List, 6000 Seconds Ecg Waveform Recall, 60 Alarm Events Recall, 7-Day Trend Chart In Storage. • Wire/Wireless Central Monitoring System Applicable To Icu/Ccu/Or. Standard Configuration: • Spo2, Pr/Hr, Nibp, Ecg, Resp, 2-Temp. • Certification- Iso 13485, Ce , Over Bed Table With Adjustable Mechanism • Abs Moulded Top Fitted On Heavy Steel Frame With Heavy Base Made Of • Crca Pipe Frame Mounted On Four 50 Mm Swivel Castors. •Fitted With Stainless Steel Pillar Height Adjustable With Pneumatic Pump • Operated By Clip Provided On Back Side Of Pillar. •Size: 32 L X 16 W X 32-42 H. •Finish: Pre-Treated & Epoxy Powder Coated Base With Stainless Steel Pillar. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Sanitizer Machine • Product Type : Fogger Machine • Voltage : 220V • Phase : Single Phase • Wattage : 1000 Watt • Rpm : 2000 Rpm • Discharge Capacity : 5-25 Ltr/Hour • Liquid Particle Size : 15-50Um • Spray Distance : 15M • Tank Capacity : 4 Litre • Cable Requirement : 3 Core Flexible Cable • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Jharkhand View Result →
21.
Power #10172978 AOC
Tender For Annual Maintenance Repair Of Md Dvvnl Office Vidyut Adhikari Colony At 220 Kv Sub Station, Sikandra, Agra - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: (DSR 2.1) All kinds of soil (DSR 2.1.1) 2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. (DSR 2.6) All kinds of soil (DSR 2.6.1) 3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(DSR 2.8) All kinds of soil. (DSR 2.8.1) 4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. (DSR )(DSR 2.25) 5 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. (DSR )(DSR 2.25(a)) 6 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. (DSR 2.26) All kinds of soil (DSR 2.26.1) 7 Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. (DSR )(DSR 2.27) 8 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (DSR 2.28) All kinds of soil (DSR 2.28.1) 9 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (DSR 2.29) All kinds of soil (DSR 2.29.1) 10 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (DSR 2.3) All kinds of soil (DSR 2.30.1) 11 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR )(DSR 2.31) 12 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR )(DSR 2.32) 13 Supplying chemical emulsion in sealed containers including delivery as specified. (DSR 2.34) Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (DSR 2.34.1) 14 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: 2.35.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration (DSR 2.35.1.1) 15 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: 2.35.2 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration (DSR 2.35.2.1) 16 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (DSR 2.35.3.1) 17 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : 2.35.4 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (DSR 2.35.4.1) 18 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : (DSR 2.35) Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. (DSR 2.35.5) 19 Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge. (DSR )(DSR 2.36) 20 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.2) 21 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.3) 22 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.8) 23 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.11) 24 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.2.2) 25 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.2.3) 26 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:2:4 (1 Cement : 2 coarse sand (zone-III)including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%)). (DSR 4.2.3A) 27 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). (DSR 4.2.8) 28 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Foundations, footings, bases for columns (DSR 4.3.1) 29 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. (DSR 4.3.2) 30 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Columns, piers, abutments, pillars, posts and struts (DSR 4.3.3) 31 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. (DSR 4.4) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.4.1) 32 Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. (DSR 4.5) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) (DSR 4.5.1) 33 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. (DSR 4.6) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.6.1) 34 Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : (DSR 4.7) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.7.1) 35 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources), including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. (DSR )(DSR 4.9) 36 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).(DSR )(DSR 4.11) 37 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification. (DSR )(DSR 4.12) 38 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (DSR 5.1) C (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.1.2) 39 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (DSR 5.2) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.2.2) 40 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.3) 41 Providing and laying reinforced cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.4) 42 Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.5) 43 Reinforced cement concrete work in chimneys, shafts, up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.6) 44 Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). (DSR )(DSR 5.8) 45 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Foundations, footings, bases of columns, etc. for mass concrete (DSR 5.9.1) 46 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (DSR 5.9.2) 47 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Suspended floors, roofs, landings, balconies and access platform (DSR 5.9.3) 48 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Shelves (Cast in situ) (DSR 5.9.4) 49 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Lintels, beams, plinth beams, girders, bressumers and cantilevers (DSR 5.9.5) 50 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Columns, Pillars, Piers, Abutments, Posts and Struts (DSR 5.9.6) 51 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Stairs, (excluding landings) except spiral-staircases (DSR 5.9.7) 52 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Chimneys and shafts (DSR 5.9.11) 53 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards(DSR 5.9.13) 54 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like (DSR 5.9.15) 55 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Edges of slabs and breaks in floors and walls 5.9.16 Under 20 cm wide (DSR 5.9.16.1) 56 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Weather shade, Chajjas, corbels etc., including edges (DSR 5.9.19) 57 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.12) 58 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.13) 59 Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR )(DSR 5.15) 60 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (DSR 5.22) Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22.6) 61 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (DSR 5.22A) Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22A.6) 62 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) 63 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.1.2) 64 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.4.1) 65 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.4.2) 66 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (DSR 6.13) Cement mortar 1:4 (1 cement :4 coarse sand) (DSR 6.13.2) 67 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab upto 0.50 sqm (DSR 8.2.1.1) 68 (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab over 0.50 sqm (DSR 8.2.1.2) 69 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Granite stone slab of colour black, Cherry/Ruby red 8.2.2 Area of slab upto 0.50 sqm (DSR 8.2.2.1) 70 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Granite stone slab of colour black, Cherry/Ruby red 8.2.2 Area of slab over 0.50 sqm (DSR 8.2.2.2) 71 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Granite stone slab of all colour and texture except black, Cherry/Ruby red 8.2.3 Area of slab over 0.50 sqm (DSR 8.2.3.2) 72 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (DSR 8.3) Granite work (DSR 8.3.2) 73 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (DSR )(DSR 8.4) 74 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (DSR )(DSR 8.5) 75 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. (DSR )(DSR 8.6) 76 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : (DSR 8.14) Red sand stone - exposed face fine dressed with rough backing. 8.14.1 30 mm thick (DSR 8.14.1.5) 77 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : (DSR 8.28) Decorative veneer facings of approved manufacture (DSR 8.28.1) 78 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 18 mm thick (DSR 8.30.1) 79 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 25 mm thick (DSR 8.30.2) 80 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR )(DSR 8.31) 81 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. (DSR )(DSR 8.32) 82 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (DSR 9.1) Sal wood (DSR 9.1.2) 83 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 35 mm thick shutters (DSR 9.5.1.1) 84 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 30 mm thick shutters (DSR 9.5.1.2) 85 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (DSR 9.7) Second class teak wood (DSR 9.7.1) 86 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 35 mm thick (DSR 9.9.1.1) 87 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 30 mm thick (DSR 9.9.1.2) 88 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) (DSR 9.11) 5.0 mm thick(weight not less than 12.50 kg per sqm) instead of 4 mm thick(weight not less than 10 kg per sqm). (DSR 9.11.1) 89 Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). (DSR )(DSR 9.12) 90 Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). (DSR )(DSR 9.14) 91 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Panelled or panelled & glazed shutters : 9.16.1 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.1.2) 92 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Glazed shutters : 9.16.2 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.2.2) 93 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 12 mm thick (DSR 9.17.1) 94 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 18 mm thick (DSR 9.17.2) 95 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). (DSR 9.18) 18 mm thick (DSR 9.18.1) 96 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). (DSR 9.18) 25 mm thick (DSR 9.18.2) 97 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DSR 9.2) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.20.1) 98 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DSR 9.2) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.20.2) 99 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (DSR 9.2) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws (DSR 9.20.3) 100 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.1) 101 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.2) 102 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.21.3) 103 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). (DSR 9.25) Decorative type door (DSR 9.25.1) 104 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). (DSR )(DSR 9.26) 105 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters (DSR 9.27.1) with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.1.1 Second class teak wood (DSR 9.27.1.1.1 ) 106 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters (DSR 9.27.1) With ISI marked stainless steel butt hinges of required size 9.27.1.2 Second class teak wood (DSR 9.27.1.2.1) 107 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutters (DSR 9.27.2) with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.2.1 Second class teak wood (DSR 9.27.2.1.1) 108 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutters (DSR 9.27.2) With ISI marked stainless steel butt hinges of required size 9.27.2.2 Second class teak wood (DSR 9.27.2.2.1) 109 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) 2nd class teak wood 9.40.1 50x12 mm (DSR 9.40.1.1) 110 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) 2nd class teak wood 9.40.1 50 x 20 mm (DSR 9.40.1.2) 111 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) Kiln seasoned and chemically treated hollock wood 9.40.2 50x12 mm (DSR 9.40.2.1) 112 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) Kiln seasoned and chemically treated hollock wood 9.40.2 50x20 mm (DSR 9.40.2.2) 113 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (DSR 9.47) 20 mm dia (heavy type) (DSR 9.47.1) 114 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (DSR 9.47) 25 mm dia (heavy type) (DSR 9.47.2) 115 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (DSR 9.48) Fixed to steel windows by welding (DSR 9.48.1) 116 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (DSR 9.48) Fixed to openings /wooden frames with rawl plugs screws etc. (DSR 9.48.2) 117 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : (DSR 9.56) 125x90x4.00 mm (DSR 9.56.1) 118 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : (DSR 9.56) 100x75x3.50 mm (DSR 9.56.2) 119 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : (DSR 9.56) 75x60x3.10 mm (DSR 9.56.3) 120 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 125x65x2.12 mm (DSR 9.57.1) 121 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 100x58x1.90 mm (DSR 9.57.2) 122 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 75x47x1.70 mm (DSR 9.57.3) 123 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.59) 150 mm (DSR 9.59.1) 124 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.59) 125 mm (DSR 9.59.2) 125 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.59) 100 mm (DSR 9.59.3) 126 Providing and fixingISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.6) 150 mm (DSR 9.60.1) 127 Providing and fixingISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.6) 125 mm (DSR 9.60.2) 128 Providing and fixingISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.6) 100 mm (DSR 9.60.3) 129 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.62) 300x16 mm (DSR 9.62.1) 130 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.62) 250x16 mm (DSR 9.62.2) 131 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 250x10 mm (DSR 9.63.1) 132 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 200x10 mm (DSR 9.63.2) 133 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 150x10 mm (DSR 9.63.3) 134 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 100x10 mm (DSR 9.63.4) 135 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378). (DSR )(DSR 9.64) 136 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.65) 300x20x6 mm (DSR 9.65.1) 137 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.65) 250x20x6 mm (DSR 9.65.2) 138 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 125 mm (DSR 9.66.1) 139 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 100 mm (DSR 9.66.2) 140 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 75 mm (DSR 9.66.3) 141 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.67) 150 mm (DSR 9.67.1) 142 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.67) 115 mm (DSR 9.67.2) 143 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.67) 90 mm (DSR 9.67.3) 144 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 125x64x1.90 mm (DSR 9.70.1) 145 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 100X58X1.90 mm (DSR 9.70.2) 146 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 75x47x1.80 mm (DSR 9.70.3) 147 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (DSR 9.7) 50x37x1.50 mm (DSR 9.70.4) 148 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : (DSR 9.71) 125x64x2.50 mm (DSR 9.71.1) 149 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : (DSR 9.71) 100x60x2.50 mm (DSR 9.71.2) 150 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : (DSR 9.71) 75x50x2.50 mm (DSR 9.71.3) 151 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 250x10 mm (DSR 9.74.1) 152 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 200x10 mm (DSR 9.74.2) 153 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 150x10 mm (DSR 9.74.3) 154 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (DSR 9.74) 100x10 mm (DSR 9.74.4) 155 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.76) 156 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.77) 157 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (DSR )(DSR 9.83) 158 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (DSR )(DSR 9.84) 159 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : (DSR 9.87) 150 mm (DSR 9.87.1) 160 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : (DSR 9.87) 115 mm (DSR 9.87.2) 161 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : (DSR 9.87) 90 mm (DSR 9.87.3) 162 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.88) 163 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. (DSR )(DSR 9.89) 164 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 40 mm (DSR 9.90.1) 165 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 50 mm (DSR 9.90.2) 166 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 65 mm (DSR 9.90.3) 167 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. (DSR 9.9) Size 75 mm (DSR 9.90.4) 168 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. (DSR )(DSR 9.91) 169 Providing and fixing chromium plated brass handles with necessary screws etc. complete: (DSR 9.92) 125 mm (DSR 9.92.1) 170 Providing and fixing chromium plated brass handles with necessary screws etc. complete: (DSR 9.92) 100 mm (DSR 9.92.2) 171 Providing and fixing chromium plated brass handles with necessary screws etc. complete: (DSR 9.92) 75 mm (DSR 9.92.3) 172 Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. (DSR )(DSR 9.93) 173 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR 9.95) 125x63x4 mm (DSR 9.95.2) 174 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR 9.95) 100x63x3.2 mm (DSR 9.95.5) 175 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR 9.95) 75x63x3.2 mm (DSR 9.95.7) 176 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (DSR 9.96) 300x16 mm (DSR 9.96.1) 177 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (DSR 9.96) 250x16 mm (DSR 9.96.2) 178 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 300x10 mm (DSR 9.97.1) 179 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 250x10 mm (DSR 9.97.2) 180 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 200x10 mm (DSR 9.97.3) 181 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 150x10 mm (DSR 9.97.4) 182 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.97) 100x10 mm (DSR 9.97.5) 183 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. (DSR )(DSR 9.98) 184 Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (DSR )(DSR 9.99) 185 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.1) 125 mm (DSR 9.100.1) 186 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.1) 100 mm (DSR 9.100.2) 187 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (DSR 9.1) 75 mm (DSR 9.100.3) 188 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR 9.101) Single rubber stopper (DSR 9.101.1) 189 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR 9.101) Twin rubber stopper (DSR 9.101.2) 190 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. (DSR )(DSR 9.103) 191 Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. (DSR )(DSR 9.104) 192 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. (DSR )(DSR 9.110) 193 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (DSR 9.114) Triple strip vertical type (DSR 9.114.1) 194 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (DSR 9.114) Double strip (horizontal type) (DSR 9.114.2) 195 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. (DSR )(DSR 9.115) 196 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) (DSR )(DSR 9.116) 197 Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. (DSR 9.126) Marine plywood conforming to IS: 710 (DSR 9.126.1) 198 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (DSR 9.127) 1.5 mm thick (DSR 9.127.1) 199 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (DSR 9.127) 1.0 mm thick (DSR 9.127.2) 200 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge (DSR )(DSR 9.129) 201 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :30 mm thick shutters (DSR 9.134.2) With ISI marked stainless steel butt hinges of required size 9.134.2.2 Second class teak wood (DSR 9.134.2.2.1 ) 202 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. (DSR 9.135) With 2nd class teak wood beading 62X19 mm (DSR 9.135.1) 203 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (DSR 9.165) 125 mm (DSR 9.165.1) 204 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (DSR 9.165) 100mm (DSR 9.165.2) 205 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (DSR 9.165) 75 mm (DSR 9.165.3) 206 Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). (DSR 9.166) 18 mm thick (DSR 9.166.1) 207 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. (DSR )(DSR 9.167) 208 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)(DSR )(DSR 9.168) 209 Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc.complete as per direction of Engineer-in-charge.(DSR )(DSR 9.169) 210 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. (DSR 9.17) 200 mm (DSR 9.170.1) 211 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 9.171) 212 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. (DSR )(DSR 9.172) 213 Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensilbasket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) (DSR )(DSR 9.173) 214 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. (DSR )(DSR 9.174) 215 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR )(DSR 10.1) 216 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR )(DSR 10.2) 217 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. (DSR 10.1) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (DSR 10.10.1) 218 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. (DSR 10.1) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (DSR 10.10.2) 219 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (DSR 10.15) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (DSR 10.15.1) 220 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (DSR 10.15) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (DSR 10.15.2) 221 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (DSR 10.16) Electric resistance or induction butt welded tubes (DSR 10.16.3) 222 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. (DSR )(DSR 10.17) 223 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. (DSR )(DSR 10.18) 224 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR 10.25) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete (DSR 10.25.1) 225 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR 10.25) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR 10.25.2) 226 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (DSR 10.26) M.S. tube (DSR 10.26.1) 227 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. (DSR 10.26) E.R.W. tubes (DSR 10.26.2) 228 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR )(DSR 10.28) 229 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. (DSR 10.29) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides (DSR 10.29.2) 230 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (DSR 10.3) 4.0 mm thick glass panes (DSR 10.30.1) 231 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (DSR )(DSR 10.31) 232 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: (DSR 11.1) 1:4 (1 cement : 4 coarse sand) (DSR 11.1.1) 233 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: (DSR 11.1) 1:6 (1cement : 6 coarse sand) (DSR 11.1.2) 234 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. (DSR )(DSR 11.2) 235 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (DSR 11.3) 40 mm thick with 20 mm nominal size stone aggregate (DSR 11.3.1) 236 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. (DSR 11.6) 18 mm thick (DSR 11.6.1) 237 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. (DSR )(DSR 11.7) 238 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. (DSR ) 40 mm wide and 4 mm thick (DSR 11.13.1) 239 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (DSR 11.2) Dark shade pigment using ordinary cement (DSR 11.20.3) 240 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (DSR 11.2) Ordinary cement without any pigment (DSR 11.20.4) 241 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (DSR 11.21) In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.1 Acid and alkali resistant tile (DSR 11.21.1.1) 242 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (DSR 11.21) In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) 11.21.2 Acid and alkali resistant tile (DSR 11.21.2.1) 243 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : (DSR 11.23) Udaipur green marble (DSR 11.23.5) 244 Extra for pre finished nosing to treads of steps of marble stone. (DSR )(DSR 11.24) 245 Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre. (DSR )(DSR 11.25) 246 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (DSR 11.26) 25 mm thick (DSR 11.26.1) 247 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR )(DSR 11.27) 248 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. (DSR 11.28) Red sand stone (DSR 11.28.1) 249 Extra for Kota stone/ sand stone in treads of steps and risers using single length above normal size up to 2.00 metre. (DSR )(DSR 11.32) 250 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (DSR )(DSR 11.37) 251 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (DSR )(DSR 11.37A) 252 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. (DSR )(DSR 11.38) 253 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. (DSR 11.41) Size of Tile 600x600 mm (DSR 11.41.2) 254 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (DSR 11.41A) Double charge vitrified tile polished finish of size 11.41A.1 Size of Tile 600 x 600 mm (DSR 11.41A.1.1) 255 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. (DSR )(DSR 11.45) 256 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (DSR 11.48) Size of Tile 600x600 mm (DSR 11.48.2) 257 Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.30 kg / sqm including grouting thejoints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only.Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400mm of all colours and shades.(DSR )(DSR 11.49A) 258 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. (DSR )(DSR 11.50) 259 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 75 mm (DSR 12.42.1.1) 260 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 110 mm (DSR 12.42.1.2) 261 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (DSR 12.45) 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) (DSR 12.45.1) 262 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. (DSR 12.47) 2 mm thick flat (DSR 12.47.2) 263 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (DSR 12.52) 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. (DSR 12.52.4) 264 Providing and fixing tiled false ceiling of specifiedmaterials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (DSR 12.58) 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. (DSR 12.58.1) 265 Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: (DSR 12.59) 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. (DSR 12.59.1) 266 Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloyIS designation31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). (DSR 12.64) 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. (DSR 12.64.1) 267 Providing and fixing of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : (DSR 12.66) Precoated/mill finish aluminium Ridges plain (500- 600mm) (DSR 12.66.1) 268 Providing and fixing of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : (DSR 12.66) Precoated/mill finish aluminium Crimp curve (DSR 12.66.5) 269 Providing and fixing of Pre-coated colour or mill finishAluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)]For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : (DSR 12.66) Precoated/mill finish aluminium Gutter (600 mm over all girth) (DSR 12.66.6) 270 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:4 (1 cement: 4 coarse sand) (DSR 13.4.1) 271 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:6 (1 cement: 6 coarse sand) (DSR 13.4.2) 272 12 mm cement plaster finished with a floating coat of neat cement of mix : (DSR 13.7) 1:4 (1 cement: 4 fine sand) (DSR 13.7.2) 273 6 mm cement plaster of mix : (DSR 13.16) 1:3 (1 cement : 3 fine sand) (DSR 13.16.1) 274 Neat cement punning. (DSR )(DSR 13.18) 275 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. (DSR )(DSR 13.21) 276 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : (DSR 13.41) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre (DSR 13.41.1) 277 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.46) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR 13.46.1) 278 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: (DSR 13.47) New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR 13.47.1) 279 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (DSR 13.48) Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm (DSR 13.48.1) 280 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (DSR 13.48) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (DSR 13.48.2) 281 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (DSR 13.48) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture (DSR 13.48.3) 282 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shadewith silicon additives. (DSR 13.48A) New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (DSR 13.48A.1) 283 Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar per sqm in the first coat and second coat respectively. (DSR )(DSR 13.59) 284 Lettering with black Japan paint of approved brand and manufacture (DSR )(DSR 13.71) 285 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR )(DSR 13.80) 286 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturerincluding applying additional coats wherever required to achieve even shade and colour(DSR 13.81) Old work (one or more coats) (DSR 13.81.1) 287 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (DSR 13.82) One coat (DSR 13.82.1) 288 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (DSR 13.82) Two coats (DSR 13.82.2) 289 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (DSR 13.83) One coat (DSR 13.83.1) 290 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (DSR 13.83) Two coats (DSR 13.83.2) 291 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. (DSR 13.85) With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre (DSR 13.85.1) 292 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. (DSR 13.85) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre (DSR 13.85.3) 293 White washing with lime to give an even shade : (DSR 13.87) Old work (two or more coats) (DSR 13.87.1) 294 White washing with lime to give an even shade : (DSR 13.87) Old work (one or more coats) (DSR 13.87.2) 295 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR )(DSR 13.88) 296 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR )(DSR 13.91) 297 Painting with oil type wood preservative of approved brand and manufacture: (DSR 13.97) Old work (one or more coats) (DSR 13.97.1) 298 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (DSR 13.99) One or more coats on old work (DSR 13.99.1) 299 Re-lettering with black Japan paint of approved brand and manufacture. (DSR )(DSR 13.105) 300 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. (DSR )(DSR 13.106) 301 Finishing walls with textured exterior paint of required shade : (DSR 13.11) Old work (One or more coats) applied @ 1.82 ltr/10 sqm. (DSR 13.110.2) 302 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (DSR 13.111.1) 303 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (One or more coat applied @ 0.90 ltr/10 sqm). (DSR 13.111.2) 304 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (DSR 13.112) Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface (DSR 13.112.1) 305 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (DSR 13.112) Old work (one or more coats applied @ 0.83 ltr/10 sqm). (DSR 13.112.2) 306 Varnishing with varnish of approved brand and manufacture: (DSR 13.113) One or more coats with copal varnish (DSR 13.113.1) 307 Melamine polishing on wood work (one or more coat). (DSR )(DSR 13.114) 308 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1.The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) (DSR )(DSR 13.116) 309 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.2) Door chowkhats (DSR 14.2.1) 310 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.2) Window chowkhats (DSR 14.2.2) 311 Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. (DSR )(DSR 14.3) 312 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. (DSR 14.4) For door/ window/ clerestory window (DSR 14.4.1) 313 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (DSR 14.5) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.5.1) 314 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (DSR 14.5) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (DSR 14.5.2) 315 Renewing glass panes and refixing existing wooden fillets: (DSR 14.7) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.7.1) 316 Renewing glass panes and refixing existing wooden fillets: (DSR 14.7) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) (DSR 14.7.2) 317 Supplying and fixing new wooden fillets wherever necessary: (DSR 14.8) Hollock wood fillets (DSR 14.8.2) 318 Renewal of old putty of glass panes (length) (DSR )(DSR 14.9) 319 Refixing old glass panes with putty and nails (DSR )(DSR 14.10) 320 Fixing old glass panes with wooden fillets (excluding cost of fillets) (DSR )(DSR 14.11) 321 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. (DSR )(DSR 14.12) 322 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR )(DSR 14.17) 323 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. (DSR 14.22) Wheel 50 mm dia and below (DSR 14.22.1) 324 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. (DSR 14.22) Wheel above 50 mm dia (DSR 14.22.2) 325 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. (DSR )(DSR 14.23) 326 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Panelled or panelled & glazed shutters : 14.26.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.1.1) 327 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Panelled or panelled & glazed shutters : 14.26.1 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.1.2) 328 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Glazed shutters : 14.26.2 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.2.1) 329 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 14.26) Glazed shutters : 14.26.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (DSR 14.26.2.2) 330 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. (DSR )(DSR 14.29) 331 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 125x70x4 mm (ordinary type) (DSR 14.40.1) 332 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 100x70x4 mm (ordinary type) (DSR 14.40.2) 333 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 75x65x4 mm (heavy type) (DSR 14.40.3) 334 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 75x40x2.5 mm (ordinary type) (DSR 14.40.4) 335 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. (DSR 14.4) 50x40x2.5 mm (ordinary type) (DSR 14.40.5) 336 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. (DSR )(DSR 14.41) 337 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) (DSR )(DSR 14.75A) 338 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. (DSR )(DSR 14.76) 339 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm(DSR )(DSR 14.77) 340 Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consistfollowing operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and otherdeposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. (DSR )(DSR 14.78) 341 Disconnecting damaged overhead/terrace PVC water storage tankof any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. (DSR )(DSR 14.79) 342 Providing & fixing White vitreous china water closet squatting pan (Indian type) along withS or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (DSR 14.8) Orissa pattern W.C Pan of size 580x440 mm (DSR 14.80.2) 343 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 14.81) 344 DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (DSR )(DSR 14.82) 345 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. (DSR )(DSR 14.83) 346 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall (DSR )(DSR 14.84) 347 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. (DSR )(DSR 14.85) 348 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (DSR 15.2) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) (DSR 15.2.2) 349 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (DSR )(DSR 15.3) 350 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 15.7) In cement mortar (DSR 15.7.4) 351 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): (DSR 15.8) From brick work in cement mortar (DSR 15.8.3) 352 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (DSR 15.12) Of area 3 sq. metres and below (DSR 15.12.1) 353 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (DSR 15.12) Of area beyond 3 sq. metres (DSR 15.12.2) 354 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : (DSR 15.13) Of area 3 sq. metres and below (DSR 15.13.1) 355 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : (DSR 15.13) Of area beyond 3 sq. metres (DSR 15.13.2) 356 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: (DSR 15.17) R.S. Joists (DSR 15.17.1) 357 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: (DSR 15.17) Channels, angles, tees and flats (DSR 15.17.2) 358 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. (DSR )(DSR 15.18) 359 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.19) 360 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : (DSR )(DSR 15.24) 361 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (DSR 15.28) G.S. Sheet (DSR 15.28.1) 362 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (DSR 15.28) Asbestos Cement sheet (DSR 15.28.2) 363 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. (DSR )(DSR 15.36) 364 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (DSR 15.44) 15 mm to 40 mm nominal bore (DSR 15.44.1) 365 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (DSR 15.44) Above 40 mm nominal bore (DSR 15.44.2) 366 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: (DSR 15.45) Up to 150 mm diameter (DSR 15.45.1) 367 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.48) 368 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.49) 369 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR )(DSR 15.52) 370 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres (DSR 15.53) Up to 150 mm diameter (DSR 15.53.1) 371 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. (DSR )(DSR 15.54) 372 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR )(DSR 15.56) 373 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. (DSR )(DSR 15.57) 374 Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. (DSR )(DSR 15.58) 375 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR )(DSR 15.60) 376 Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. (DSR 16.7) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 16.7.1) 377 Brick edging laid lengthwise with half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres : (DSR 16.8) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 16.8.1) 378 Supplying at site : (DSR 16.15) R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). (DSR 16.15.1) 379 Supplying at site : (DSR 16.15) Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). (DSR 16.15.2) 380 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. (DSR 16.17) With G.I. barbed wire (DSR 16.17.1) 381 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. (DSR 16.18) With G.I. barbed wire (DSR 16.18.1) 382 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (DSR )(DSR 16.19) 383 Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. (DSR 16.31) With medium setting bitumen emulsion 16.31.2 On bituminous surface @ 0.25kg/sqm (DSR 16.31.2.2) 384 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). (DSR 16.33) With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt (DSR 16.33.1) 385 Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. (DSR )(DSR 16.40) 386 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. (DSR )(DSR 16.42) 387 Extra for providing and mixing hardening compound of approved quality as per manufacturers specification in cement concrete. (DSR )(DSR 16.44) 388 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) (DSR )(DSR 16.45) 389 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) (DSR )(DSR 16.53) 390 Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 16.64) 391 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge. (DSR )(DSR 16.67) 392 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (DSR )(DSR 16.68) 393 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR )(DSR 16.69) 394 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (DSR 16.7) Made of G.I. wire of dia 4 mm (DSR 16.70.1) 395 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). (DSR )(DSR 16.75) 396 Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. (DSR )(DSR 16.76) 397 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. (DSR 16.78) With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 (DSR 16.78.2) 398 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. (DSR )(DSR 16.83) 399 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). (DSR )(DSR 16.84) 400 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (DSR )(DSR 16.89) 401 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. (DSR 16.91.1) 402 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. (DSR 16.91.2) 403 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (DSR 17.1) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR 17.1.1) 404 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (DSR 17.2) W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.2.1) 405 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (DSR 17.3) W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.3.1) 406 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (DSR 17.7.3) 407 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (DSR 17.7.4) 408 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked (DSR 17.7.9) 409 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR 17.7) Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap (DSR 17.7.11) 410 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a)White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (DSR )(DSR 17.7A) 411 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: (DSR 17.9) White glazed fire clay kitchen sink of size 600x450x 250 mm (DSR 17.9.1) 412 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (DSR 17.1) Kitchen sink with drain board510x1040 mm bowl depth 200 mm (DSR 17.10.1.3) 413 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (DSR 17.1) Kitchen sink without drain board 17.10.2 610x510 mm bowl depth 200 mm (DSR 17.10.2.1) 414 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. (DSR )(DSR 17.15) 415 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (DSR )(DSR 17.16A) 416 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (DSR 17.18) 10 litre capacity - White (DSR 17.18.1) 417 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : (DSR 17.2) White solid plastic seat with lid (DSR 17.20.1) 418 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (DSR )(DSR 17.22A) 419 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia (DSR )(DSR 17.22B) 420 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. (DSR )(DSR 17.23) 421 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. (DSR )(DSR 17.24) 422 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 630x450 mm (DSR 17.25.1) 423 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 550x400 mm (DSR 17.25.2) 424 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 450x300 mm (DSR 17.25.5) 425 Providing and fixing kitchen sink including making all connections excluding cost of fittings. (DSR 17.26) White glazed fire clay sink of size 600x450x250 mm (DSR 17.26.1) 426 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR 17.28) Semi rigid pipe 17.28.1 32 mm dia (DSR 17.28.1.1) 427 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR 17.28) Flexible pipe 17.28.2 32 mm dia (DSR 17.28.2.1) 428 Providing and fixing 100 mm sand cast Iron grating for gully trap. (DSR )(DSR 17.29) 429 Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. (DSR )(DSR 17.30) 430 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR )(DSR 17.31) 431 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. (DSR )(DSR 17.33) 432 Providing and fixing toilet paper holder : (DSR 17.34) C.P. brass (DSR 17.34.1) 433 Providing and fixing toilet paper holder : (DSR 17.34) Vitreous china (DSR 17.34.2) 434 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. (DSR 17.69) Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms (DSR 17.69.1) 435 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. (DSR 17.69) Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms (DSR 17.69.2) 436 Providing and fixing PTMT Bottle Trap for Wash basin and sink. (DSR 17.7) Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms (DSR 17.70.1) 437 Providing and fixing PTMT Bottle Trap for Wash basin and sink. (DSR 17.7) Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms (DSR 17.70.2) 438 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (DSR )(DSR 17.71) 439 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. (DSR )(DSR 17.72) 440 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (DSR 17.73) 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms (DSR 17.73.1) 441 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (DSR 17.73) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (DSR 17.73.2) 442 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. (DSR )(DSR 17.74) 443 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. (DSR )(DSR 17.75) 444 Providing and fixing PTMT urinal cock of approved quality and colour. (DSR 17.76) 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms (DSR 17.76.1) 445 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. (DSR 17.77) Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe) (DSR 17.77.1) 446 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (DSR )(DSR 17.78) 447 Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. (DSR )(DSR 17.79) 448 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (DSR )(DSR 17.80) 449 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (DSR )(DSR 17.81) 450 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work, including cutting chases and making good the walls etc.) (DSR 18.8) 20 mm nominal dia Pipes (DSR 18.8.2) 451 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work, including cutting chases and making good the walls etc.) (DSR 18.8) 25 mm nominal dia Pipes (DSR 18.8.3) 452 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 15 mm nominal dia Pipes (DSR 18.9.1) 453 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 20 mm nominal dia Pipes (DSR 18.9.2) 454 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 25 mm nominal dia Pipes (DSR 18.9.3) 455 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 32 mm nominal dia Pipes (DSR 18.9.4) 456 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 40 mm nominal dia Pipes (DSR 18.9.5) 457 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 50 mm nominal dia Pipes (DSR 18.9.6) 458 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 80 mm nominal dia Pipes (DSR 18.9.8) 459 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work (DSR 18.12) 80 mm dia nominal bore (DSR 18.12.8) 460 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : (DSR 18.13) 25 to 40 mm nominal bore (DSR 18.13.1) 461 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : (DSR 18.13) 50 to 80 mm nominal bore (DSR 18.13.2) 462 Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). (DSR )(DSR 18.14) 463 Providing and fixing brass bib cock of approved quality : (DSR 18.15) 15 mm nominal bore (DSR 18.15.1) 464 Providing and fixing brass bib cock of approved quality : (DSR 18.15) 20 mm nominal bore (DSR 18.15.2) 465 Providing and fixing brass stop cock of approved quality : (DSR 18.16) 15 mm nominal bore (DSR 18.16.1) 466 Providing and fixing brass stop cock of approved quality : (DSR 18.16) 20 mm nominal bore (DSR 18.16.2) 467 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 25 mm nominal bore (DSR 18.17.1) 468 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 20 mm nominal bore (DSR 18.17.1A) 469 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 32 mm nominal bore. (DSR 18.17.2) 470 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 40 mm nominal bore (DSR 18.17.3) 471 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 80 mm nominal bore (DSR 18.17.6) 472 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 25 mm nominal bore 18.19.1 Horizontal (DSR 18.19.1.1) 473 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 25 mm nominal bore 18.19.1 Vertical (DSR 18.19.1.2) 474 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 32 mm nominal bore 18.19.2 Horizontal (DSR 18.19.2.1) 475 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 32 mm nominal bore 18.19.2 Vertical (DSR 18.19.2.2) 476 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 40 mm nominal bore 18.19.3 Horizontal (DSR 18.19.3.1) 477 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 40 mm nominal bore 18.19.3 Vertical (DSR 18.19.3.2) 478 Providing and fixing gun metal non- return valve of approved quality (screwed end) : (DSR 18.19) 80 mm nominal bore 18.19.6 Vertical (DSR 18.19.6.2) 479 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 30 cm length 18.21.1 15 mm nominal bore (DSR 18.21.1.1) 480 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 30 cm length 18.21.1 20 mm nominal bore (DSR 18.21.1.2) 481 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 45 cm length 18.21.2 15 mm nominal bore (DSR 18.21.2.1) 482 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 45 cm length 18.21.2 20 mm nominal bore (DSR 18.21.2.2) 483 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (DSR 18.22) 100 mm diameter (DSR 18.22.1) 484 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (DSR 18.22) 150 mm diameter (DSR 18.22.2) 485 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : (DSR 18.27) 100 mm dia pipe (DSR 18.27.1) 486 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : (DSR 18.28) 100 mm diameter pipe (DSR 18.28.1) 487 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : (DSR 18.3) 80 mm diameter pipe (DSR 18.30.1) 488 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : (DSR 18.3) 100 mm diameter pipe (DSR 18.30.2) 489 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : (DSR 18.31) 100 mm diameter 18.31.1 Class I (DSR 18.31.1.1) 490 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : (DSR 18.31) 100 mm diameter 18.31.1 Class II (DSR 18.31.1.2) 491 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR )(DSR 18.48) 492 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (DSR 18.62) 20 mm nominal bore, 120 mm long, weighing not less than 198 gms (DSR 18.62.2) 493 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms (DSR )(DSR 18.63) 494 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms (DSR )(DSR 18.64) 495 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (DSR )(DSR 18.65) 496 Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. (DSR 18.84) 15 mm nominal bore (DSR 18.84.1) 497 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : (DSR 19.5) 100 mm diameter (DSR 19.5.1) 498 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : (DSR 19.6) 150 mm dia. R.C.C. pipe (DSR 19.6.2) 499 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : (DSR 19.6) 300 mm dia. R.C.C. pipe (DSR 19.6.4) 500 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. (DSR 19.32) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR 19.32.1) 501 Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. (DSR )(DSR 19.33) 502 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.1.1) 503 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.1.2) 504 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.1.3) 505 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.2.1) 506 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.2.2) 507 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.2.3) 508 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) (DSR 21.3.1) 509 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (DSR 21.3.2) 510 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) (DSR 21.3.3) 511 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With stainless steel cover plate minimum 1.25 mm thickness (DSR 21.4.1) 512 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With brass cover plate minimum 1.25 mm thickness (DSR 21.4.2) 513 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). (DSR )(DSR 21.5) 514 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge. (DSR )(DSR 21.6) 515 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. (DSR 21.8) Upto 5mm depth and 5 mm width (DSR 21.8.1) 516 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. (DSR 21.9) For fixed portion (DSR 21.9.1) 517 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. (DSR 21.9) For shutters of doors, windows & ventilators (DSR 21.9.2) 518 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). (DSR )(DSR 21.14) 519 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). (DSR )(DSR 21.17) 520 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (DSR )(DSR 21.18) 521 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11601 (DSR 21.19) Upto 5 mm depth and 5 mm width (DSR 21.19.1) 522 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11602 (DSR 21.19) Upto 10 mm depth and 10 mm width (DSR 21.19.2) 523 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) (DSR )(DSR 22.5) 524 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck ,using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturers specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (DSR )(DSR 22.22) 525 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. (DSR 23.1) All types of soil 23.1.1 300 mm dia (DSR 23.1.1.1) 526 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. (DSR 23.2) All types of soil 23.2.1 350 mm dia (DSR 23.2.1.2) 527 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. (DSR 23.3) 150 mm nominal size dia (DSR 23.3.2) 528 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (DSR 23.4) 150 mm nominal size dia (DSR 23.4.2) 529 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR )(DSR 23.5) 530 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR )(DSR 23.6) 531 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. (DSR )(DSR 23.7) 532 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (DSR )(DSR 23.8) 533 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (DSR )(DSR 23.12) 534 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: (DSR 23.13) 150 mm dia (DSR 23.13.2) 535 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. (DSR 23.14) 150 mm clamp (DSR 23.14.2) 536 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). (DSR 23.15) 150 mm dia (DSR 23.15.2) 537 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. (DSR )(DSR 25.1) 538 Providing and fixing factory madeKitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardenthaving necessary screw holding capacity.Shutter shall be fixed to frame usingapproved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. (DSR )(DSR 26.10) 539 Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete : (DSR )(DSR 26.11) 540 Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq mm frls pvc insulated copper conductor single core cable in surface /recessed medium class pvc conduit , with modular switch ,modular plate, suitable GI box and earething the pint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (DSR E&M 1.10)Group A (DSR E&M 1.10.1) 541 Wiring for light/power plug with 2x4 sq. mm FRLS PVC insulatted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (DSR E&M 1.12) 542 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x2.5sq. Mm + 1x2.5 sq. mm eartrh wire (DSR E&M 1.14.2) 543 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x4sq. Mm + 1x4 sq. mm eartrh wire (DSR E&M 1.14.3) 544 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (DSR E&M 1.21) 25mm (DSR E&M 1.21.2) 545 Supplying and fixing 6way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240V, on Surface/recess,complete with tinned copper bus bar, heutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But with MCB/RCCB/Isolator) (DSR E&M 2022 2.3.1) 546 Supplying and fixing 5 amps to 32 amps rating,Single pole, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR E&M 2022 2.10.1) 547 Supplying and fixing 63 amps, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(DSR E&M 2022 2.12.2) 548 Supplying and fixing 63 A, four pole, 415V, isolator in the existing MCB DB Complete with connections, testing and commissioning etc. as required. (DSR E&M 2022 2.13.2) 549 Earthing with G.I earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR E&M 2022 5.2) 550 Smoke Detector with built in LED, mounting base complete with all connection etc. (DSR E&M 2022 4102) 551 Manual call boxes of MS Type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. (DSR E&M 2022 4103) 552 Manual call boxes of ABS Type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. (DSR E&M 2022 4104) 553 Response indicator on surface/recessed MS Box having two LEDs metallic covers complete with all connections etc.(DSR E&M 2022 4105) 554 Fire alarm sounders (electronic) with facility to make announcement, mounted in M.S. Box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. (DSR E&M 2022 4106) 555 Fire alarm sounders (electronic) with facility to make announcement, mounted in A,B.S. Box with hinged cover plate & suitable for operation with amplifier l/c line matching ttransformer etc. (DSR E&M 2022 4107) 556 Talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. Knob & speaker/microphone enclosed in a M.S (16 SWG)/ABS.Box, break glass in front etc. (DSR E&M 2022 4108) 557 6 Zone fire alarm control panel as per IS: 2189 with backlit LCD (DSR E&M 2022 4110) 558 Cost of25 mm outer dia PVC/ABS Pipe with end caps including making air sampling operning of appropriate dia on appropriate interval. (DSR E&M 2022 4143) 559 Cost of fire survival armoured cable, fibre, fibre glass tape wrapped, ZH inner, outer sheath 2x1.5 sq. mm cable(DSR E&M 2022 4144) 560 Cost of fire alarm armoured FRLS cable 2 x 1.5 sqmm (DSR E&M 2022 4145) 561 Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required (DSR E&M 2022 19.1) 562 Concrete with 4cm gauge I class brick ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) 563 Concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 including cost of all labour, materials, T&P etc required for proper completion of work. (CSI No. 5.20) 564 Brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.18) 565 Brick work in Super structure with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.19) 566 S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . exept cost of M.S angle and flat. (CSI No. 9.22) 567 Providing and laying SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.29 c) 110 mm dia 568 Supply and Fixing of 3 blade wall fan of Havells platina 400 mm or equivalent including all material, T&P etc required for proper completion of work as approved by engineer in charge. (CSI No. 28.37) 569 Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.(CSI No. 28.38) 570 Supply & fixing steel tubular pole 7 Metre long designated 410 SP-2 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 2018 PWD 603 571 Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 2018 PWD 641 572 Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 2018 PWD 642 573 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 2018 PWD 1131 574 Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 2018 PWD 1131(A) 575 Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 2018 PWD 1132 576 Same as in item no. 1132 but of 6..5 kg. capacity 2018 PWD 1132 (A) 577 Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge 2018 PWD 1133 578 Supply and fixing of power plug with 15A/250 voltflushtype switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mmsize with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 2018 PWD 1139 579 Supply and fixing ofLED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. 2018 PWD 1413(A)CAT AA 580 Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. 2018 PWD 1421CAT AA 581 Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 175 to 200 Watt. Confirming to IP 66Protection complete in all respects.2018 PWD 1425(A)CAT AA 582 Supply and fixing of3 Watt LED Path / Walkover luminaire having powder cotated die cast aluminium body with drive set . Confirming to IP 65 Protection complete in all respect. 2018 PWD 1441CAT AAA 583 Supply and fixing of 3 Watt to 6 Watt LED Spot/Spike light luminaire Confirming to IP 66 Protection complete in all respect. 2018 PWD 1441 (A) CAT AAA 584 Supply and fixing ofdecorative 8 to 16 Watt LEDbollard luminaire with driver set confirming to IP 65 protection complete in all respect. 2018 PWD 1442CAT AAA 585 Supply and fixing ofdecorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and aboveprotection complete in all respect.2018 PWD 1443CAT AAA 586 Supply and fixing of 450mm size Exhaust fan of approved quality ISI mark (Bajaj/Havells/Usha/Crompton or equivalent make) complete with all respect as per sample approved by Engineer in charge including supply of all materials, labour and T&P etc requried for proper completion of the work as direction of E/I complete. (NSI ) 587 S/F of LED Bulb 9Watt bajaj or equivalent make as approved sample and make as per direction of Engineer in charge (NSI) 588 Supply and fixing of 200 mm Turbo ventilator Fan with ss Chimneycap & pipe of approved quality ISI mark (Bajaj/Havells/Usha/Crompton or equivalent make) complete with all respect as per sample approved by Engineer in charge including supply of all materials, labour and T&P etc requried for proper completion of the work as direction of E/I complete. (NSI ) 589 Providing and fixing 15 mm thick Industrial tiles size 600 x 600 mm to of Johnson Endura Meteor or approved make and colour using in different sizes (thickness to be specified by the manufacturer) conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(NSI) 590 20-25 mm thick fine dressed Red sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.(NSI) 591 Providing/Laying 20-25 mm thick fine dressed Red sand stone flooring including supply of all materials, labour and T&P required for proper completion of work as perdirection of the Engineer-in charge.(NSI) 592 Providing and fixing prefab structure of size which does not require any structural steel frame at all heights of the existing building with following specifications: Manufactured by Epack polymers pvt ltd /Pronto panels Or Equivalent make.Walls: Outer & Inner walls made of 50 mm thick PUF insulated panels cladded with 0.5 mm thick PCGI sheet zinc coating 120 grams per sqm as per IS: 277. The wall panels shall be connected to each other with Cam Locks @ 1.00 m C/C The walls shall be connected to the the base platform with 1mm thick channels & 100 to 150mm long dash fasteners. The walls & ceiling shall be connected to each other by 1mm thick flashing as per the manufacturer specifications. Any number of vertical partitions are to be provided in the structure as required at site & as per the directions of the E-in-C complete. All the inner / outer gaps, if any, are to be filled with silicon, rubber gasket or any material required complete & directions of the Engineer in charge.Ceiling: Made of 50 mm thick PUF insulated panels cladded with 0.5 mm thick PCGI sheet zinc coating 120 grams per sqm as per IS: 277. The ceiling shall be extended from the wall on all sides by not less than 450mm & not more than 600mm with neccessary slopes in wall as required at the site & directions of the Engineer in charge complete. The outer edges of the roof shall be covered with the channel of the same material as of puff panel.Doors: Made out of 50 mm thick PUF insulated panels inner/outer side cladded with 0.5 mm thick PCGI sheet zinc coating 120 grams per sqm as per IS: 277. complete with providing & fixing all accessories like locks, SS hinges, SS Tower Bolts,SS handles of required size not more than 300mm.Windows: The frame work shall be of aluminium work (Powder coated aluminium (minimum thickness of powder coating 50 micron)) for doors, windows(Sliding/Openable as required with requisite handles, tower bolts,20mm dia SS curtain rod & any other fitting required ), ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be of thickness not less than 14gauge, smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing with 5.50mm thick glass / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. The outer surface shall have fly proof stainless steel grade 304 wire gauge, using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete .Strengthing of door, window, ventilators & any other opening : Any opening provided will have the framework strengthened with 1mm thick MS Plate on all sides all complete & directions of the Engineer in charge.Measurements: Only the floor area of the pre fab outer structure will be measured for payment purpose.Conditions Rates include all lifts, leads, depths, material, labour, scaffolding, all heights for location, carriage, wastage, tools and plants and other all inputs for execution of the item. The colour of the panels for walls & ceiling should be got approved from the E-in-C prior to start of manufacturing of the structure. The Structure requires approx five partitions in the two structures besides two outer walls . Note: The zinc sheet of the puff panels can either be plain/corrugated on both sides or one side plain & one side corrugated upto any pitch in horizontal / verticals per the drawings & requirement at site. 593 Supply,Installation, testing & commissioning Battery 12 V 7 AH Exide or equivalent make for above fire alarm system. Complete as per direction of the Engineer-in charge. 594 Supply,Installation, testing & commissioning Response Indicator Agni Suraksha or equivalent make. Complete as per direction of the Engineer-in charge. 595 Supply,Installation, testing & commissioning Camera (3 MP) colour W Audio IP Dome Secureye or equivalent Indian make ,Lens-3.6mm. Complete as per direction of the Engineer-in charge. 596 Supply,Installation, testing & commissioning Camera (2 MP) IP Dome Falcon series Secureye or equivalent Indian make ,Lens-3.6mm. Complete as per direction of the Engineer-in charge. 597 Supply,Installation, testing & commissioning NVR 8 channelSecureye or equivalent Indian make, with 4TBHDD Hard Disk. Complete as per direction of the Engineer-in charge. 598 Supply,Installation, testing & commissioning Connector D link or equivalent make Complete as per direction of the Engineer-in charge. 599 Supply,Installation, testing & commissioning 8 Port POE Switch Secureye or equivalent Indian make Complete as per direction of the Engineer-in charge. 600 Supply,Installation, testing & commissioning Cable (CAT6) D link or equivalent make Complete as per direction of the Engineer-in charge. 601 Servicing of Air Conditioner (For Window/Split) by aurthorised service center complete in all respect including all labour and T&P. (CSI No. 20.30) 602 Servicing of Air Conditioner and filling of GAS (For Window/Split) by aurthorised service center complete in all respect including all labour and T&P. (CSI No. 20.31) 603 Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver setcomplete in all respect. 1401 PWD CAT AA 604 Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. 1402 PWD CAT AA 605 Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.1406 PWD CAT AA 606 P/F of 30 W orevo make or equivalent make LED light 30 Watt over Hoarding frame along boundary wall of MD DVVNL Campus, 220 KV S/S Sikandra , Agra with necessary materials , labour, T&P etc required for proper completion of the work as per direction of Engineer in charge. (NSI) 607 Providing and fixing of 20 W Philips make or equivalent make LED Tube light 20 Watt with necessary materials labour, T&P etc requried for proper completion of the work as per direction of Engineer in charge (NSI) 608 S/F of 07 Watt LED bulb Syska or other equivalent make including cost of labour, T&P etc required for proper completion of the work (NSI) 609 Supply and fixing of vertical blinds with hanging/sliding rod of aluminium (vista or equivalent make), vertical cord for operation of blinds, L-type hooks, screws, gullies etc. including all T&P, labour etc required for proper completion of the work in all respect. (NSI) 610 Printing name and designation of occupants and other information on residence block/office building including preparation of the base with best quality synthetic enamel paint as directed by E/I including cost of all materials, labour and T&P etc. required for proper completion of work. (NSI) 611 Providing and fixing of Name plate Acrylic/Glow sign Sheet per mm thick without letter as per approved shade and design as per direction of Engineer in charge (NSI) 612 Providing and Pasting of Name plate letter cutting words laser machine without name plate including cost of necessary all fittings such as nut, screws, labour T&P etc requried for proper completion of the work as per direction of Engineer in charge (NSI)
Contract Date: Apr 23, 2026 Contract Value : ₹ 21.94 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
22.
Educational and Research Institute #10148425 Price Bid
Surgical Item Of Nrr And Nrs , Item Name , Nonabsorbable Polypropylene Light Weight Macroporous Mesh 30 X 30 Cm , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesivebarrier Visceral Side And Stay Suture In Parietal Side Along With Medial Medial 15 Cm Circular , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial Medial12 Cm Circular , Three Dimensional Monofilament Polyester Composite Mesh With With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial Medial20x15cm , Absorbable 5 Mm Hernia Mesh Fixation Device 30 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4.1 Mm Length Along With Flexible Shaft Up To 3 Cm. , Absorbable 5 Mm Hernia Mesh Fixation Device 15 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4.1 Mm Length Along With Flexible Shaft Up To 3 Cm. , Non Absorbable 5 Mm Hernia Mesh Fixation Device With 30 Helical Shaped Titanium Tacks 3.96Mm Width And 0.61 Mm Diameter , 5Mm Nonabsorbable Helical Fastener Made Up Of Medical Grade Stainless Steel Covered With Atraumatic Polymer (Peek) Cap To Avoid Metal Exposure With 15 Fasteners , 5Mm Nonabsorbable Helical Fastener Made Up Of Medical Grade Stainless Steel Covered With Atraumatic Polymer (Peek) Cap To Avoid Metal Exposure With 30 Fasteners , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shapesize Large Right 10.8*16Cm /15*10 Cm , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shapesize Large Right 10.8*16Cm /15*10 Cm , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shapesize Extra Large Left12.4Cm * 17.3 /16*12 Cm , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shapesize Extra Large Right 12.4Cm * 17.3/16*12 Cm , Battery Operated 60Mm Articulatingendo Cutter With A Disposable Battery Pack, For Enhanced Distal Tip Stability While Firing, Having Closed Channel In The Cartrdige Jaw For Better Stability During Firing, 360 Degree Rotation Shaft And One Handed Natural Articulation Up To 45 Degrees, Precision Machined Anvil To Deliver Initial, System Wide Compression, Wide Proximal To Distal Jaw Aperture (Proximal 8Mm , Distal 22Mm) , 3 Point Gap Control For Alignment And Calibration Throughout The 60 Mm Staple Line, Knife Direction/Reverse Control To Discontinue The Firing And Return The Knife, Interchangeable 6 Row Cartridge Options Of White, Blue ,Gold, Green And Black, All Fits Down To 12Mm Trocar Sleeve, 440 Mm Shaft Length -60 Mm Stapler , Linear Cutter 55Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Linear Cutter 75Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Universal Linear Cutter Cartridge 75Mm Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 75Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology. , Universal Linear Cutter Cartridge 55Mm For Open Linear Cuttercompatible With Selectable Staple Height Linear Cutter 55Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology. , Curved Cutter Stapler 40 Mm Linear Cutter Simultaneous Cutting And Stapling , Curved Green Cartridge Having Close Staple Height Of 2.0 Mm, Tactile Feedback On Completion Of Firing Sequence, New Anvil, Knife With Every Catridge , Powered Circular Stapler 29 Mm With 3D Staple And Not Slip Grip , Powered Circular Stapler 31Mm With 3D Staple And Not Slip Grip , Circular Stapler 33Mm With Controlled Tissue Compression With Adjustable Staple Height(1.0-2.5 Mm) For Controlled Tissue Compression, Longer Staple Leg 5.5Mm & Non Slip Grip Surface , Laparoscopic Cartridge For Stapler 60 Mm Blue, 1.5 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Ofendoscopic Linear Cutter 60Mm , Laparoscopic Cartridge For Stapler 60 Mm Green, 2.0 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Pph Stapler 33Mm - Hemorrhoidal Stapler Kit Consists Of 33Mm Hemorrhoidal Circular Stapler (With Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm – 1.5 Mm, Staple Open Leg Length Of 5.5 Mm), Suture Threader, Circular Anal Dilator, Purse-String Suture Anoscope, Suture For Purse String. , Optically Guided Bladeless Trocar 12Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Optically Guided Bladeless Trocar 12 Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer Length 100Mm. , Facial Closure Device Contain - Optical Bladeless Trocar With Facial Closure Device Comaptible With Clear Cannula Have Two Side Opening Meant For Uniform Port Closure , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Varied Staple Height Reloads/Cartridges For 80 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 60 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 60 Mm Open Linear Cutterreloads/Cartridges Purpule And Black , Eea Circular Stapler Purple Colour Medium Thick , Triple Row With Tristaple Technology (Three Row Of Staple Inner To Outer Row 3.0,3.5 And 4.0 Mm With Sloped Cartridges Face In One Stapler) Diameter 31Mm , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 80 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 80 Mm Open Linear Cutterreloads/Cartridges Purpule And Black , Wound Protector With Double Ring In Small 2.5-6 Cm Usfda Approved , Wound Protector With Double Ring Inmedium 5-9 Cm , Wound Protector With Double Ring In Large In Size 9-14 Cm Usfda Approved , Endo Catch Specimen Removal Kit:With Continuous Ring ,Polyurethane Pouch With 34.5 Cm Shaft Length , 10Mm With Leakproof And Impervious Material To Cancer Cells Of 0.5 Microns/ Pretied Purse String On Pouch Usfda Approved , Disposable Laparoscopic Clip Applier Preloaded With 16 Clips, 5Mm Diameter With Clip Logictechnology And Digital Display Titanium Clips- U Shaped , Laparoscopic Liner Cutterwithout Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 30Mmcapable Of Loading All Length Cartridges On Same Gun Only , Laparoscopic Liner Cutterwithout Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 45Mm Capable Of Loading All Length Cartridges On Same Gun Only , Laparoscopic Liner Cutterwithout Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 60Mm, Capable Of Loading All Length Cartridges On Same Gun Only , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,9Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Up To And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip- Focus 9 , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,17Cm Length,16Mm Curved Active Bladewith Adaptive Tissue Technologycapable Of Sealing Blood Vessels Upto And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip - Focus 17 , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 35 Cm Shaft Length With 5 Mm Wide Straight Jaw Design With Seal Length Of 20Mm And Cut Length Of 16Mm,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy And Having A Temperature Controlled Mechanism Within The Jaw And Having Articulation Of 110 Degree(55 Degrees On Both Sides) And Capable Of 360 Degrees Rotation , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 45 Cm Shaft Length With 5 Mm Wide Straight Jaw Design With Seal Length Of 20Mm And Cut Length Of 16Mm,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy And Having A Temperature Controlled Mechanism Within The Jaw And Having Articulation Of 110 Degree(55 Degrees On Both Sides) And Capable Of 360 Degrees Rotation , Advance Bipolar Hand Activated Probe For Open Surgery With 13Mm Shaft Diameter And 20 Cm Shaft Length, 6 Mm Wide Straight Jaw Design With Jaw Length Of 38 Mm ,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy , Having Separate Seal And Cut Buttons, Capable Of 360 Degrees Rotation , Laparoscopic Shears 5Mm Diameter,36Cm Long, 15Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting, Sealing, Grasping And Coagulating Blood Vessels Up To And Including 5Mm In Diameter, 360 Degrees Rotation, Ergonomic Handle Compatible With Ultrasonic Energy Source And Capable Of Hand And Foot Activation , Advanced Bipolar Tissue Sealer 25 Cms, With 5Mm Shaft Diameter,24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm Jaw Aperture Designed For Use In Open Surgical Procedures With Curved And Tapered Tip And Uses An Advanced Algorithm For Intelligent And Efficient Energy Delivery. Device To Have Intuitive Design With Separate Seal And Cut Button And 360 Degree Continuous Shaft Rotation , Advanced Bipolar Tissue Sealer 37 Cms, With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm Jaw Aperture Designed For Use In Laproscopic Surgical Procedures With Curved And Tapered Tip And Uses An Advanced Algorithm For Intelligent And Efficient Energy Delivery. Device To Have Intuitive Design With Separate Seal And Cut Button And 360 Degree Continuous Shaft Rotation , Advanced Bipolar Tissue Sealer 45 Cms With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm Jaw Aperture Designed For Use In Laproscopic Surgical Procedures With Curved And Tapered Tip And Uses An Advanced Algorithm For Intelligent And Efficient Energy Delivery. Device To Have Intuitive Design With Separate Seal And Cut Button And 360 Degree Continuous Shaft Rotation , Laparoscopic Shears 5Mm Diameter,36Cm Long, 18Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting,Sealing,Grasping And Coagulating Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, Advance Hemostasis Hand Activation Mode For Sealing Vessels Upto 7Mm In Diameter ,Ergonomic Handle Compatible With Ultrasonic Energy Source, Capable Of Hand And Foot Activation With An Integrated Hand Piece And Transducer. , Connecting Cable For Ultrasonic Harmonic Scalpel For Open Energy Probes Compatible With Focus Plus Shear- Hp Blue , Connecting Cable For Ultrasonic Harmonic Scalpel For Lap Energy Probes Compatible Withace Plus Shear Hp054 , Laparoscopic Shears 5Mm Diameter,45Cm Long, 15Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting,Sealing,Grasping And Coagulating Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, Advance Hemostasis Hand Activation Mode For Sealing Vessels Upto 7Mm In Diameter, Ergonomic Handle Compatible With Ultrasonic Energy Source And Capable Of Hand And Foot Activation , Nasal Haemostatic Sponge Pack (With Airway) 10Inch , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium)Plates - 2 Mm Thickness (2*2 ) Holedrill Bit Machine With Insertiontools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*2) Holedrill Bit Machine With Insertiontools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*1 ) Holedrill Bit Machine With Insertiontools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium)Screw- (2 Mm ) Diameter Drill Bit Machine With Insertiontools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (1.5 Mm ) Diameter Drill Bit Machine With Insertiontools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2.5 Mm ) Diameter Drill Bit Machine With Insertiontools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (3 Mm) Diameter Drill Bit Machine With Insertiontools , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 17Fr (4 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 17Fr (6 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 17Fr (8 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 17Fr (10 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 17Fr (12.5 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 20Fr (4 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 20Fr (6 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 20Fr (8 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 20Fr (10 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 20Fr (12.5 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 22.5Fr (6 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 22.5Fr (8 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 22.5Fr (10 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 22.5Fr (12.5 Mm) , Speech Prosthesis For Laryngectomy (Indwelling Lowresistance Silicon Voice Prosthesis Varied Diameter With Varied Length Should Have Blue Teflon Valve Seet For Primary And Secondary Insertion Along With Inserting Tools And Cleaning Accessories) 22.5Fr (4 Mm) , Block Used In Thyroplasty (Sialestic And Gortex) 70*50 Mm With 20 Mm Thickness , Disposable Needle 16G X 1 Inch , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 2.0,2.5 And 3.0 Mm Staple Heights Rowfor Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Tan Colour Code For Vascular Applications , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 3.0,3.5 And 4.0 Mm Staple Heights Rowfor Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Purpule Colour Code For Medium To Thick Tissue , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Black Varied Staple Height Of 4, 4.5 And 5Mm Leg Length , Disposable Laparoscopic Clip Applier Preloaded With 16 Clips, 5Mm Diameter With Clip Logictechnology And Digital Display Titanium Clips- U Shaped , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 2*4Cm , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 5*10Cm , Disposable 10 Mm Endoscopic Clip Applier With Facility Of Loading Clips Independent Of The Firing Mechanism: Medium/Large Size , Disposable 10 Mm Endoscopic Clip Applier With Facility Of Loading Clips Independent Of The Firing Mechanism Large Size , Endo Liner Cutterwithout Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 30Mm,Capable Of Loading All Length Cartridges On Same Gun Only , Endo Liner Cutterwithout Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of45mm Capable Of Loading All Length Cartridges On Same Gun Only , Endo Liner Cutterwithout Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 60Mm, Capable Of Loading All Length Cartridges On Same Gun Only , Disposable Clip Applier Preloaded With 20 Clips, Superinterlock Security With Clip Designtechnology Medium , Disposable Clip Applier Preloaded With 20 Clips, Superinterlock Security With Clip Designtechnology Small , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use -2 Ml , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use -5 Ml , Biological Glue With Thrombin & Aprotinin 1Ml , Biological Glue With Thrombin & Aprotinin 2Ml , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit)8 No , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit)No. 10 , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit)No. 14 , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit)No. 12 , Sterile Oxidized Regenerated Cellulose Hemostating Agentin Netform Fibrillar And In Thick Sheath As Per Ip , Urine Collecting Bag, Disposable 2000 Ml With Uroflow Meter , Central Neck Line- Double Lumen (3 Nobel Metal Coated (Gold, Silver, Palladium)Central Lumen Catheter, Double Lumen) , Microcatheter Selective Infusion Microcatheters For Intra Cranial Aneurysm Treatment With 2 Tip Markers , Microcatheter Selective Infusion Microcatheters For Deploying Intracranial Device: Stent Deployment , Microcatheter Selective Infusion Microcatheters For Flow Diverter Delivery With Single Tip Markers 0.027Inch , Microcatheterflow Dependent Super-Selective High Flow Infusion Microcatheters For Cerebral/Spinal Avms (Compatible With Dmso) , Micro Guide Wirefor Microcatheter Shapable Distal End And With Torque 0.014Inch , Bare Platinum Coil Complex Shape, Soft, Electrolytic Detachable Framing And Filling1 To 25Mm , Bare Platinum Coil Complex Shape, Soft, Mechanically Detachable Framing And Filling1 To 25Mm , Bare Platinum Coil Helical Shape, Soft, Electrolytic Detachable1 To 25Mm , Bare Platinum Coil Helical Shape, Soft, Mechanically Detachable1 To 25Mm , Aortic Punch 2.5 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 3Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 3.5Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 4 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 4.5 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 5 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 5.5Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 3.6Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Folleys Catheter Fixation Divice Foley Catheter Holder Universal Size Should Have Leg Band And Is Disposable Single Patiemnt Use Device Should Have Catheter Grip Of 18 To 24 Fr Catheter And Made Of Crobelt Or Any Other. , Tur Set Tur Irrigation Set Disposable Urology Instrument Urology Equipment Endosurgery, Mfg From Clinical Grade Non Toxic Medical Transparent Pvc Sheet, Y Shaped Connector With Pointed Spike To Easy Pierce Facilities Alternative Change Solution, Thumb Operated Clamp Smooth Chnage Of Bottle, Proximal End Fitted With Flexible Latest Tubing For Easy Connection To Endoscope, Eto Steril Individual Pack. Should Have Minium Lenght Of 260 Cm Or More. , Laproscopic Port With Trocar5mm Optically Guided Bladeless Trocar 5Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needleshould Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Patient Pre Operative Skin Prepration Solution 26 Ml In One Step Sterile Applicator Container For Single Use With 2% Chlorohexdine Gluconate (Chg) And 70% Ipa With Orange Tint Colour Or Easy Visulization, Us Fda Approved , Rem And Non-Remsingle Use, Corded Patient Return Electrodesconductive Adhesive Hydrogel With Usfda. , Chlorhexidine Impregnated Paraffin Gauze30x10cm , Chlorhexidine Impregnated Paraffin 15 Cm X 1 Roll , Surgical Gloves 6.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Ionic Silver Dressings With Broad Spectrum Antimicrobial, Bactericidal, Biofilm Destruction & Reformation Efficacies Recommended For Low To High Exuding Wounds5 Cms X 5 Cms , Ionic Silver Dressings With Broad Spectrum Antimicrobial, Bactericidal, Biofilm Destruction & Reformation Efficacies Recommended For Low To High Exuding Wounds10 Cms X 10 Cms , Self Adherent Moist Wound Dressing Made Up Of Triple Hydrocolloid Matrix,Elastomeric Polymer For Pressure Ulcers/Bed Sores 10 Cms X 10 Cms , Stich Bonded Hydrofiber Burns Dresssings With 1.2% Impregnated Ionic Silver With Sustained And On Demand Broad Spectrum Antimicrobial & Bactricidal Activity With High Exudate Management Capability With A Wear Time Of 21 Days & Locking In Edudates In Gel Form 23 X 100 Cms , Double Wall Resuscitator With Peep Valve In Adult. Itshould Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult Bag Volume: Mark Iv (1300 Ml) Weight: Adult (415 G) It Should Be Us-Fda, Ce & Iso Certified , Double Wall Resuscitator With Peep Valve In Paediatrics. It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve Forpeadiatric It Should Have Provision To Attach Manometer For Paediatrics Ambu Bag Bag Volume:Mark Iv Baby (300 Ml) Weight:Baby (190 G) It Should Be Us-Fda, Ce & Iso Certified , Single Patient Use Sebs Resuscitator (Spur Ii With Peep Valve In Adult) • It Should Be Single Use Resuscitator Made To Sebs Material Not Pvc. • It Should Have Unique Single-Shutter Valve System For Reliable Functionality & Swivel Between Valve And Mask Permits 360° Positioning In Relation To The Patient • It Should Have Thin-Walled Compression Bag With Hand Strip. • Resuscitator Volume: Adult (1475 Ml) • (Including Reservoir And Mask) • It Should Be Ce/Iso, Us Fda Certified. , Single Patient Use Sebs Resuscitator (Spur Ii With Peep Valve Inpaed) • It Should Be Single Use Resuscitator Made To Sebs Material Not Pvc. • It Should Have Unique Single-Shutter Valve System For Reliable Functionality & Swivel Between Valve And Mask Permits 360° Positioning In Relation To The Patient • It Should Have Thin-Walled Compression Bag With Hand Strip.It Should Have Provision To Attach Manometer For Paediatrics Ambu Bag. • Resuscitator Volume: Pediatric (635 Ml) • (Including Reservoir And Mask) • It Should Be Ce/Iso, Us Fda Certified. , Single Patient Use Sebs Resuscitator (Spur Ii With Peep Valve In Neonatal) • It Should Be Single Use Resuscitator Made To Sebs Material Not Pvc. • It Should Have Unique Single-Shutter Valve System For Reliable Functionality & Swivel Between Valve And Mask Permits 360° Positioning In Relation To The Patient • It Should Have Thin-Walled Compression Bag With Hand Strip. • Resuscitator Volume: Neonate(220Ml) • (Including Reservoir And Mask) • It Should Be Ce/Iso, Us Fda Certified. , Pre-Formed Sga With Gastric Access & Intubationsizes – 1 It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubation Sizes – 1.5It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubationsizes – 2 It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubationsizes – 2.5 It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubationsizes – 3It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubationsizes – 4 It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubationsizes – 5It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubation Sizes – 6 It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sgasizes – 1 • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga Sizes – 1.5 • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sgasizes – 2 • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga Sizes – 2.5 • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sgasizes – 3 • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sgasizes – 4 • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sgasizes – 5 • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sgasizes – 6 • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Cervical Collar With 12 Sizes Settings Sizes – 12 • It Should Be Latex Free Adjustable Collar With12 Size Setting In Paediatric Collar • It Should Have Standard Sizing Line For Easy And Accurate Sizing • It Should Be Ce/Iso, Us Fda Certified , Cervical Collar With 16 Sizes Settings • It Should Be Latex Free Adjustable Collar With 16 Size Setting In Adult Collar • It Should Have Standard Sizing Line For Easy And Accurate Sizing • It Should Be Ce/Iso, Us Fda Certified , Offset Connector Cardio Sensor Electrodessizes –Adult • It Should Have High Conductive Wet Gel To Ensure Reliable Traces. • It Should Be Design With Offset Connector To Prevent Artefacts From Disrupting The Readouts • It Should Have High Quality Ag/Agcl Sensor To Ensure Excellent Trace Quality • It Should Have Size Not More Than 72 X 68 Mm , Offset Connector Cardio Sensor Electrodessizes –Paediatrics • It Should Have High Conductive Wet Gel To Ensure Reliable Traces. • It Should Be Design With Offset Connector To Prevent Artefacts From Disrupting The Readouts • It Should Have High Quality Ag/Agcl Sensor To Ensure Excellent Trace Quality • It Should Have Size Not More Than 72 X 68 Mm , Offset Connector Cardio Sensor Electrodessizes –Neonatal • It Should Have High Conductive Wet Gel To Ensure Reliable Traces. • It Should Be Design With Offset Connector To Prevent Artefacts From Disrupting The Readouts • It Should Have High Quality Ag/Agcl Sensor To Ensure Excellent Trace Quality • It Should Have Size Not More Than 72 X 68 Mm , Anatomical Face Mask With Thumb Rest Silicone Sizes -0A •Thumb Rest For A Tight, Easy Seal, Made Up Of Silicone , Anatomical Face Mask With Thumb Rest Siliconesizes -0 •Thumb Rest For A Tight, Easy Seal, Made Up Of Silicone • Can Be Autoclaved Repeatedly At 134°C , Anatomical Face Mask With Thumb Rest Silicone Sizes -2 •Thumb Rest For A Tight, Easy Seal, Made Up Of Silicone • Can Be Autoclaved Repeatedly At 134°C , Anatomical Face Mask With Thumb Rest Silicone Sizes -3 •Thumb Rest For A Tight, Easy Seal, Made Up Of Silicone • Can Be Autoclaved Repeatedly At 134°C , Anatomical Face Mask With Thumb Rest Silicone Sizes -4 •Thumb Rest For A Tight, Easy Seal, Made Up Of Silicone • Can Be Autoclaved Repeatedly At 134°C , Anatomical Face Mask With Thumb Rest Siliconesizes -5 •Thumb Rest For A Tight, Easy Seal, Made Up Of Silicone • Can Be Autoclaved Repeatedly At 134°C , Anatomical Face Mask With Thumb Rest Silicone Sizes -6 •Thumb Rest For A Tight, Easy Seal, Made Up Of Silicone • Can Be Autoclaved Repeatedly At 134°C , Disposable Sga Anatomical Curve Sizes – 1 • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curvesizes – 1.5 • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curve Sizes – 2 • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curve Sizes – 2.5 • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curve Sizes – 3 • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curvesizes – 4 • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curvesizes – 5 • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curvesizes – 6 • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Rhinolaryngo Single Patient Use Slim Scope Insertion Tube Diameter : 3.0Mm. Working Length: 300 Mm Bending Range: 130 Degree Up & 130 Degree Down Field Of View: 85 Degree Or More Direction Of View : 0 Degree (Forward View) Depth Of Field : 6-50 Mm Or Better Complete System Should Be Us-Fda And European Ce Certified , Rhinolaryngo Single Patient Use Invtervention Scope Channel Width: 2.2Mm Insertion Tube Diameter: 5.0 Mm. Working Length : 350 Mm Bending Range:130 Degree Up & 130 Degree Down Field Of View : 85 Degree Or More Direction Of View: 0 Degree (Forward View) Depth Of Field: 6-50 Mm Or Better Complete System Should Be Us-Fda And European Ce Certified , Ultrasorbs Ap Disposable Drypads, Dry Pad For Moisture Management, 58.4X90cm,With Breathable Layer, Super Absorbent Core, Aqua Shield Film And Air Permeable Back Sheet, Absorbency Of 1800-2300Gm, Usfda/Ce/Bis Compliant, Iso13485 Compliant , Elastic Head Strap Cannulas Pediatric. Elastic Head Strap Cannulas Pediatric Must Be Soft Siliconised, Transparent Vinyl; Adjustable Elastic Band For Comfortable, Snug Fit Below The Ears; Complete Kit With 7-Ft Oxygen Supply Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Over-The-Ear Nasal Cannula. Over-The-Ear Nasal Cannula With Star Lumen, 50 Tubing, Must Be Flexible Contoured Lip Tab Provides A High Level Of Stability And Patient Comfort. Over-The-Ear Design For A Comfortable And Secure Fit, Crush- And Kink-Resistant Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Pediatric Nasal Cannula.Pediatric Nasal Cannula Softech With Universal Oxygen Connector, 7 Star-Lumen Tubing Lightweight, Flexible Nasal Cannula With Standard Over-The-Ear Designed That Optimizes Fit And Stability, Soft Nasal Prongs Help Maximize Patient Comfort. Individually Packaged For Convenience And Sterility. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Infant Nasal Cannula.Infant Nasal Cannula Softech With Universal Oxygen Connector, 7 Star-Lumen Tubing Lightweight, Flexible Nasal Cannula With Standard Over-The-Ear Designed That Optimizes Fit And Stability, Soft Nasal Prongs To Help Maximize Patient Comfort. Individually Packaged For Convenience And Sterility. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Volumetric Incentive Spirometer (Adult) . Volumetric Incentive Spirometer (Adult) 4000 Ml With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Volumetric Incentive Spirometer (Pediatric) .Volumetric Incentive Spirometer (Pediatric) 2500 Ml With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Inspiratory Exerciser With 3 Color-Coded Balls, 3 Chambers Inspiratory Exerciser With 3 Color-Coded Balls, 3 Chambers & Wide Flow Rate Range From 600 To 1200 Cc/Sec, With Minimum Flow Imprinted On Each Chamber. Must Be Compact Design And Made Of Break-Resistant Plastic. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Mask For Tracheostomy . Adult Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Pardiatric Mask For Tracheostomy. Pediatric Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Elongated Aerosol Mask Adult .Elongated Aerosol Mask Adult With Under-The-Chin Design For Excellent Fit On Wide Range Of Face Sizes Must Be Clear, Soft Vinyl For Patient Comfort; Adjustable Nose Clip Assures Comfortable Fit; Specifically Designed For Aerosol Therapy; Must Be With Supplied With 6 Ft. Corr A Flex Corrugated Tubing, Featuring Cuttable Sections Every 6 In. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Elongated Aerosol Mask Pediatric Elongated Aerosol Mask Pediatric With Under-The-Chin Design For Excellent Fit On Wide Range Of Face Sizes Must Be Clear, Soft Vinyl For Patient Comfort; Adjustable Nose Clip Assures Comfortable Fit; Specifically Designed For Aerosol Therapy; Must Be With Supplied With 6 Ft. Corr A Flex Corrugated Tubing, Featuring Cuttable Sections Every 6 In. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Elongated Three-In-One Adult Maskelongated Three-In-One Adult Mask Must Be Able To Use As A Medium-Concentration, High-Concentration Or Nonrebreathing Mask Which Includes Mask With Flapper Valve, Nonrebreathing Bag Assembly; Adjustable Nose Clip Assures Comfortable Fit; With 7 Ft. Star Lumen Oxygen Supply Tubing; 750 Ml Reservoir Bag. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Limb Portable Adult Ventilator Circuit With Universal Single Limb. Must Be Complete Kit With Main Circuit Hose, Exhalation Valve Manifold, Aerosol Hose, Patient Elbow Connector, Proximal Airway Pressure Line, Exhalation Valve Line, And Humidifier Limb. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Water Trapadult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Dual Limb Water Trap Adult Conventional Dual Limb Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Dual Limb Inspiratory & Expiratory Water Trap 22Mm Tubing,(For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Infant Prong Cpap Cannula Infant Prong Cpap Cannula Nasal Size 0 With Designed To Reduce Trauma Associated With Delivery Of Infant Nasal Cpap. Must Be Soft Siliconised, Anatomically Curved Prongs To Enhance Fit. Luer Fitting On Expiratory Connector To Allow Proximal Airway Pressure Monitoring. Each Set To Include, Soft Siliconised Cannula; Inspiratory & Expiratory Elbow Connector; Knit Cap; Two 6 In. Hook And Loop Fastener Sections; Two 10 To 7.5 Mm Adaptors. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Fhme Heat And Moisture Exchangers With Bacteria Viral Filters Bacterial Filtration Efficiency≫ 99.99 % And Viral Filtration Efficiency ≫ 99.9999% . Filter Membrane Should Be Of A Hydrophobic Non-Woven Polypropylene Material. Should Be Tailored To Meet The Specific Needs Of Both Anaesthesia And Intensive Care. , Tracheostomy Hme: 1 Heat And Moisture Exchangers For Spontaneously Breathing Tracheotomy Patients. 2 Should Have In Built Oxygen Port. 3 Should Be Compact & Light Wt. 4 Should Be Suitable For Ambulatory Patients, Sampling And Suctioning Can Be Done Without Removing It. 5 The System Should Have Kink Resisting Oxygen Tubing , Double Lumen Endobronchial Tube Left:Size-28Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left:Size-32Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left:Size-35Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left: Size-37Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left:Size-39Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left:Size-41Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Right: Size-35Fr Low Pressure Tracheal And Bronchial Cuffs To Minimize Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fibreoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Right: Size-37Fr Low Pressure Tracheal And Bronchial Cuffs To Minimize Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fibreoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Right: Size-39Fr Low Pressure Tracheal And Bronchial Cuffs To Minimize Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fibreoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Sub-Glottic Tube Taper Guard Evac: Sizes 6Mm The Tube Should Have An Additional Lumen Integrated Into The Wall Of The Tube To Allow Suctioning Of Subglottic Space. Should Have Cuff In Taper Size To Prevent Micro Aspiration Should Have Low Volume/Low Pressure Cuff. , Sub-Glottic Tube Taper Guard Evac: Sizes 6.5Mm The Tube Should Have An Additional Lumen Integrated Into The Wall Of The Tube To Allow Suctioning Of Subglottic Space. Should Have Cuff In Taper Size To Prevent Micro Aspiration Should Have Low Volume/Low Pressure Cuff. , Sub-Glottic Tube Taper Guard Evac: Sizes 7Mm The Tube Should Have An Additional Lumen Integrated Into The Wall Of The Tube To Allow Suctioning Of Subglottic Space. Should Have Cuff In Taper Size To Prevent Micro Aspiration Should Have Low Volume/Low Pressure Cuff. , Sub-Glottic Tube Taper Guard Evac: Sizes 7.5Mm The Tube Should Have An Additional Lumen Integrated Into The Wall Of The Tube To Allow Suctioning Of Subglottic Space. Should Have Cuff In Taper Size To Prevent Micro Aspiration Should Have Low Volume/Low Pressure Cuff. , Sub-Glottic Tube Taper Guard Evac: Sizes 8Mm The Tube Should Have An Additional Lumen Integrated Into The Wall Of The Tube To Allow Suctioning Of Subglottic Space. Should Have Cuff In Taper Size To Prevent Micro Aspiration Should Have Low Volume/Low Pressure Cuff. , Sub-Glottic Tube Taper Guard Evac: Sizes 8.5Mm The Tube Should Have An Additional Lumen Integrated Into The Wall Of The Tube To Allow Suctioning Of Subglottic Space. Should Have Cuff In Taper Size To Prevent Micro Aspiration Should Have Low Volume/Low Pressure Cuff. , Sub-Glottic Tube Taper Guard Evac: Sizes 9Mm The Tube Should Have An Additional Lumen Integrated Into The Wall Of The Tube To Allow Suctioning Of Subglottic Space. Should Have Cuff In Taper Size To Prevent Micro Aspiration Should Have Low Volume/Low Pressure Cuff. , Inflation Device Inflation Device In 30Atm & 20Ml With Clear Polycarbonate Barrel For Easy Visualisation Of Bubbles, Luminescent Dial, Airless Rotator, Lock Release Handle For Easy One-Handed Control And Primelok For Easy Preparation.Usfda Approved , Manifold Manifolds In 2, 3, 5 Port With Configuration Of Left-Right Orientation, On-Off Handle, Full-Half Body, 200 Psi-500 Psi Rating And Wide Port Spacing. Should Have Clear Polycarbonate Body To Provide Durability And Visibility, Airless Rotator And Large Bore Inner Lumen Throughout Including Rotator.Usfda Approved , High Pressure Tube. High Pressure Tubing In 25Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 51Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 76,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In122,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In183cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , Torque Device Torque Device For .014 To .038 Standard And Hydrophilic Guide Wires With Squeeze-Load-Release Mechanism.Usfda Approved , Radial Band Radial Hemostatis Band In 24 Cm . Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Radial Band Radial Hemostatis Band In 29 Cm. Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Angiography Needle Angiography Needle In 18G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Needle Angiography Needle In 19G,Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Needle Angiography Needle In 20G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Needle Angiography Needle In 21G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Wire Ptfe Guidewire In .035, .038, In Regular Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coating For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , Angiography Wire Long Length Ptfe Guidewire In .035, .038, With Exchange Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coating For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , Amplatz Wire Ptfe Amplatz Type Wire In .035 And .038, Length Of 75Cm, 145Cm, 180Cm. Should Be Available In Multiple Flexible Tip Length Of 1.0Cm, 3.5Cm, 4.0Cm, 6Cm, 7Cm And J 3.0Mm. Usfda Approved. , Hydrophilic Wire Hydrophilic Guidewire Of .018, .025, .035, .038 In 80Cm, 150Cm With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Approved , Hydrophilic Wire Long Length Hydrophilic Guidewire Of .018, .025, .035, .038 In 180Cm, 220Cm, 260Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Approved , Hydrophillic Braided Sheath Hydrophilic Braided Sheath Introducer In 4F To 7F, Length Of 7, 11, 16, 23Cm With The Option Of .018, .021, .025 Plastic Jacketed And Spring Coil Guidewire. Should Have Ultra-Thin Wall And Flat Wire Braiding Technology To Provide Support And Low Profile.Usfda Approved , Femoral Sheath With Needle Femoral Sheath In 5F To 8F, Length Of 11-23Cm With Puncher Needle Of 18G And Guidewire Of .035, .038. Should Have Rotating Suture Ring, Snap-Fit Dilator To Prevent Slipping During Insertion And Holster Pack. Should Be Available In Polypropylene. Usfda Approved , Angiography Catheter Diagnostic Catheter In 4F-6F, Length Of 70-110Cm & 125Cm , Should Come In Various Shapes & Curve Length Including Jl & Jr (1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 Cm), Al, Ar, Tig, Mp, Im, Sones, Pigtail (Straight, Angle, Radial). Should Have Flat Wire Braiding, Nylon Material, Thin Wall Design For Higher Flow Rates, Radio-Opaque Tip, Strain Relief And Winged Polycarbonate Hub. Should Be Available In Various Configurations- Braided, Non Braided, Short Tip, Bumper Tip, Sideholes As Applicable. Usfda Approved , Angiography Radial Catheters. Diagnostic Radial Catheter With Radial Ultimate Curve In 4-6F. Lenght Of 100Cm, 110Cm, 125Cm. Should Have Four Type Of Radial Ultimate Curves. Should Have Flat Wire Braiding, Nylon Material, Thin Wall Design For Higher Flow Rates, Radio-Opaque Tip, Strain Relief And Winged Polycarbonate Hub. Us Fda Approved , One Loop & Triple Loop Snare Snare Kit(2-35Mm Diameter, 90-Degree Nitinol & Gold-Plated Tungsten Loop) And Multiloop Snare Kit(2-45Mm Diameter, Three Interlaced Nitinol Loops) For Foreign Body Retrieval, Should Come With Flexible, Reinforced, Strain Relief Hub To Reduce Buckling And Unique Peel Away Insertion Tool. Usfda Approved , Ptca Kit (1) Three Port Manifold With Knobs To TurnRight When Open (2) One Pressure Line, (3) Fluid Connecting Line, (4) Contrast Connecting Line, (5) One Three Way Stop Cock,(6) One Y-Connector Hemoststic Valve With Spring Type Push And Release Mechanism, (7) One Inflation Device With Manometer Upto 30 Atm (Easy To Operate With Luminescent Dial), (8) One Luer Lock Controlled Syringe Of 10 Ml With Finger Grip, (9) Insertion Needle, (10) Torque Device.Usfda Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes Are 5Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 6Fr , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 7Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes8fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes Are10fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes 12Fr. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3.5Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 5.5Mm , Adult Endotracheal Tube Cuff Is Made Up Of Polyurethane.Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 20 Cmh2o.Burst Pressure Of Cuff Is 800Cmh2o.Cuff With Play Mode Function. Sizes 5.5Mm. , Adult Endotracheal Tube Cuff Is Made Up Of Polyurethane.Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 20 Cmh2o.Burst Pressure Of Cuff Is 800Cmh2o.Cuff With Play Mode Function. Sizes 10Mm. , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. T Size 13Fr . , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering.Sizes16fr. , Disposable Spo2 Sensor It Should Be Base On Original Nellcor Technology Withoriginaloximax Technology , Catheter Mount Double Swivel Connector, It Should Have Bronchoscopy Port . It Sholud Be Approved By Us Fda , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism,Radiopaque Stripe,Gamma Sterilized Size – 12,Length (0.8 – 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism,Radiopaque Stripe,Gamma Sterilizedsize – 14 Length (0.8 – 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism,Radiopaque Stripe,Gamma Sterilizedsize – 16 Length (0.8 – 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism,Radiopaque Stripe,Gamma Sterilizedsize – 18,Length (0.8 – 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism,Radiopaque Stripe,Gamma Sterilizedsize – 20 Length (0.8 – 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism,Radiopaque Stripe,Gamma Sterilized Size – 24Fr Length (0.8 – 5.0) , Percutaneous Endoscopic Gastrostomy (Peg) Medical Grade Silicone Construction.External Retention Ring .Universal And Bolus Feeding Port Connectors,Medication Port.Collapsible Internal Retention Bumper.Radiopaque Stripe And Bumper.Tubing Clamp.Eto Sterilized.Sizes – 14Fr , Percutaneous Endoscopic Gastrostomy (Peg) Medical Grade Silicone Construction.External Retention Ring .Universal And Bolus Feeding Port Connectors,Medication Port.Collapsible Internal Retention Bumper.Radiopaque Stripe And Bumper.Tubing Clamp.Eto Sterilized.Sizes –20Fr , Percutaneous Endoscopic Gastrostomy (Peg) Medical Grade Silicone Construction.External Retention Ring .Universal And Bolus Feeding Port Connectors,Medication Port.Collapsible Internal Retention Bumper.Radiopaque Stripe And Bumper.Tubing Clamp.Eto Sterilized.Sizes – 24Fr , Silk Protein Based Sterile Surgical Pu Foam Dressing Non Adhesive Biomodified, Silk Protein Based, Sterile, Soft, Conformable, Absorbent, Double Layered Polyurethene Foam Dressingcomprised Ofsilk Protein 8% And Asiaticoside Nlt 0.6%, With Super Fluid Handling Capacity, Decreases The Risk Of Maceration,Sterlization-Gamma Sterlized , Silk Protein & Antimicrobial Nanosilver Based Sterile Surgical Pu Foam Dressing Non Adhesivebiomodified, Silk Protein & Silver Impregnated, Soft, Conformable, Absorbent, Double Layered Polyurethene Foam Dressingcomprised Ofsilk Protein 8%, Asiaticoside Nlt 0.6% And Silver 1.2%, With Super Fluid Handling Capacity, Decreases The Risk Of Maceration,Sterlization-Gamma Sterlized , Silk Protein & Antimicrobial Silver Based Sterile Surgical Mesh Wound Dressing Biomodified, Bilaminated Silk Protein And Silver Wound Dressing With Mesh Pores To Facilitatethe Easy Drainage Of Exudates, Comprised Of Activated Silk Matrix 46% And Asiaticoside Nlt 0.6% And,Sterlization-Gamma Sterlizedsilver :1.2%. Non- Adhesive, Square / Rectangular In Shape,Sterlization-Gamma Sterlized , Silk Protein & Antimicrobial Nanosilver Based Sterile Surgical Wound Dressing Sheet Biomodified, Bilaminatedsilk Protein & Silver Based Surgical Wound Dressing Comprised Of Activatedsilk Matrix 46% And Asiaticoside 0.6% And Silver :1.2%. Non- Adhesive, Square / Rectangular In Shape,Sterlization-Gamma Sterlized , Silk Protein Derived Sterile Surgical Meshed Wound Dressing Biomodified, Bilaminated Silk Protein Wound Dressing With Mesh Pores To Facilitatethe Easy Drainage Of Exudates, Comprised Of Activatedsilk Matrix 46% And Asiaticoside Nlt 0.6%.Non- Adhesive Dressing, Square / Rectangular In Shape,Sterlization-Gamma Sterlized , Silk Protein Based Sterile Surgical Wound Dressing Sheet Biomodified, Bilaminated Silk Protein Wound Dressing Comprised Of Activatedsilk Matrix 46% And Asiaticoside Nlt 0.6%. Non- Adhesive Dressing, Square / Rectangular Shape,Sterlization-Gamma Sterlized , Silk Protein Based Antimicrobial Wound Healing Ointment Loaded With Asiaticoside And Silver Biomodified Silk Protein And Silver Based Wound Healing Ointment Comprised Of Silk Powder 8% , Asiaticoside Nlt 0.6% And Silver:1.2%,Sterlization-Gamma Sterlized , Silk Protein And Nanosilver Based Microbicidal Sterile Surgical Wound Dressing Sprinkling Powder Bottle Biomodified Silk Protein And Silver Based Microbicidal Sprinkling Powder,Comprised Of Silk Powder 8%, Asiaticoside Nlt 0.6% And Silver :1.2% . Conforms To Any Wound Shape And Size, Easy To Apply,Sterlization-Gamma Sterlized , Silk Protein Based Sterile Surgical Wound Dressing Sprinkling Powder Bottle Biomodified Silk Protein Based Wound Healing Sprinkling Powder,Comprised Of Silk Powder 8% And Asiaticoside Nlt 0.6% . Conforms To Any Wound Shape And Size, Easy To Apply,Sterlization-Gamma Sterlized , Centella Asiatica Extract Based Skin Moisturization And Antiscar Gel Centella Asiatica Extract Based Skin Moisturization And Antiscar Gel, Comprised Of Centella Asiatica Extract, Glycerol And Vitamin E.,Sterlization-Gamma Sterlized , Silk Protein Based Sterile Surgical Particle Wound Dressingbiomodified, Bioabsorbable Silk Protein And Collagen Containing Particle Wound Dressing, Comprised Of Silk Powder 8% , Asiaticoside 0.6% And Collagen ,Having Natural Moisturizing Factor(Nmf), Suitable For Cavity Wound And Any Kind Of Slow And Non- Healing Wound,Sterlization-Gamma Sterlized , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Particle Wound Dressing 5Mlbiomodified,Bioabsorbable Silk Protein, Collagen And Silver Containing Broadspectrum Antimicrobial Particle Wound Dressing ,Comprised Of Silk Powder 8%, Asiaticoside 0.6% ,Having Natural Moisturizing Factor(Nmf), Suitable For Deep, Tunneling Cavity Wound Or Any Kind Of Slow And Non- Healing Wound,Sterlization-Gamma Sterlized , Silk Protein And Antimicrobial Nanosilver Based Sterile Surgical Particle Wound Dressing10ml Biomodified,Bioabsorbable Silk Protein, Collagen And Silver Containing Broadspectrum Antimicrobial Particle Wound Dressing ,Comprised Of Silk Powder 8%, Asiaticoside 0.6% ,Having Natural Moisturizing Factor(Nmf), Suitable For Deep, Tunneling Cavity Wound Or Any Kind Of Slow And Non- Healing Wound,Sterlization-Gamma Sterlized , Silk Protein Based Non-Woven Backed With Pad & Self Adhesive Border, Water-Repellent Sterile Surgical Dressing 10*20Cm,Silk Protein And Nanocrystalline Silver Based Highly Conformable Sterile Antimicrobial Dressing With Adhesive Backing And Absorbent Layer ,Sterlization-Gamma Sterlized , Silk Protein Based Non-Woven Backed With Pad & Self Adhesive Border, Water-Repellent Sterile Surgical Dressing10*25Cm,Silk Protein And Nanocrystalline Silver Based Highly Conformable Sterile Antimicrobial Dressing With Adhesive Backing And Absorbent Layer ,Sterlization-Gamma Sterlized , Silk Protein Based Non-Woven Backed With Pad & Self Adhesive Border, Water-Repellent Sterile Surgical Dressing15*15Cm Silk Protein And Nanocrystalline Silver Based Highly Conformable Sterile Antimicrobial Dressing With Adhesive Backing And Absorbent Layer ,Sterlization-Gamma Sterlized , Silk Protein And Pu Foam Pad With Self Adhesive Border, Water-Proof Dressing For Post-Operative Scar Or Any Scar Management10*20Cm , Silk Protein Based Highly Conformable Sterile Pu Foam With Antiscarring Properties And Adhesive Backin,Sterlization-Gamma Sterlized , Silk Protein And Pu Foam Pad With Self Adhesive Border, Water-Proof Dressing For Post-Operative Scar Or Any Scar Management 10*25Cm ,Silk Protein Based Highly Conformable Sterile Pu Foam With Antiscarring Properties And Adhesive Backin,Sterlization-Gamma Sterlized , Silk Protein And Pu Foam Pad With Self Adhesive Border, Water-Proof Dressing For Post-Operative Scar Or Any Scar Management 10*21.5Cms Silk Protein Based Highly Conformable Sterile Pu Foam With Antiscarring Properties And Adhesive Backin,Sterlization-Gamma Sterlized , Silk Protein, Nanosilver And Asiaticoside Based Pu Film Backed With Pad & Self Adhesive Border, Water-Proof Sterile Surgical Dressing 9*21.5Cmsilk Protein, Nanocrystalline Silver & Asiaticoside Based Highly Conformable Sterile Antimicrobial Surgical And Scar Free Wound Healing Dressing With Adhesive Backing And Absorbent Layer,Sterlization-Gamma Sterlized , Silk Protein, Nanosilver And Asiaticoside Based Pu Film Backed With Pad & Self Adhesive Border, Water-Proof Sterile Surgical Dressing 10*25Cmsilk Protein, Nanocrystalline Silver & Asiaticoside Based Highly Conformable Sterile Antimicrobial Surgical And Scar Free Wound Healing Dressing With Adhesive Backing And Absorbent Layer,Sterlization-Gamma Sterlized , Silk Protein And Antimicrobial Nanosilver Impregnated Non-Adherent Leno Gauze Sterile Surgical Wound Dressing 10*10Cm . Silk Protein & Nanocrystalline Silver Based Sterile, Non-Adherent, Antimicrobial Gauze Dressing ,Sterlization-Gamma Sterlized , Silk Protein And Antimicrobial Nanosilver Impregnated Non-Adherent Leno Gauze Sterile Surgical Wound Dressing10*25Cm . Silk Protein & Nanocrystalline Silver Based Sterile, Non-Adherent, Antimicrobial Gauze Dressing ,Sterlization-Gamma Sterlized , Silk Protein Impregnated Non-Adherent Leno Gauze Sterile Primary Surgical Wound Dressing 10*10Cm Silk Protein Based Sterile, Non-Adherent, Antimicrobial Gauze Dressing ,Sterlization-Gamma Sterlized , Silk Protein Impregnated Non-Adherent Leno Gauze Sterile Primary Surgical Wound Dressing 10*25Cm . Silk Protein Based Sterile, Non-Adherent, Antimicrobial Gauze Dressing ,Sterlization-Gamma Sterlized , Papain-Urea & Silk Protein Based Wound Debriding Ointment And Cream 25Gm Papain-Urea Based Debriding Ointment And Cream For Removal Of Necrotic Tissue And Slough In Infected Wounds, Containing Papain Ip : >521700 Units And Urea Ip : 100Mg , Papain-Urea & Silk Protein Based Wound Debriding Ointment And Cream50gmpapain-Urea Based Debriding Ointment And Cream For Removal Of Necrotic Tissue And Slough In Infected Wounds, Containing Papain Ip : >521700 Units And Urea Ip : 100Mg , Silk Protein, Asiaticoside And Povidone Iodine Based Broad Spectrum Topical Antiseptic And Antimicrobial Wound Healing Ointment 25Gmbroad Spectrum Antiseptic And Antimicrobial Topical Ointment Containing Povidone Iodine Usp: 5% W/W, Silk Protein, Centella Asiatica For Prevention Of Skin And Wound Infections. , Silk Protein, Asiaticoside And Povidone Iodine Based Broad Spectrum Topical Antiseptic And Antimicrobial Wound Healing Ointment50gm Broad Spectrum Antiseptic And Antimicrobial Topical Ointment Containing Povidone Iodine Usp: 5% W/W, Silk Protein, Centella Asiatica For Prevention Of Skin And Wound Infections. , Anti Microbial Gloves Size-6 , Anti Microbial Gloves Size-6.5 , Anti Microbial Gloves Size-7 , Anti Microbial Gloves Size-7.5 , Anti Microbial Gloves Size-8 , Anterior Chamber Iol Pmma Material, Single Piecekelman Multiflex Design5-6 Mm Optic Size With 12-13 Mm Overall Size Biconvex Power Range +12 To +24Should Be Iso Or Ce Certified. Manufacturer Should Be Asked To Sample For Approval. , Capsular Tension Ring Standard Capsular Tension Ringpmma Material With One Eyelet Each At Each End 10 Mm To 12 Mm Overall Diameter Sterile Should Be Iso/Ce Certified Mfg. , Iris Hooks /Retractors Set Of Five Disposable Sterile Iris Hooks With Soft Silicon Stopper Sterile Peek Should Be Made Pmma Iso/Ce Certified Mfg. , Silicone Rod For Ptosis Repair Implantable Flexible Silicon Rod Attached To Malleable Sharp Needles With A Silicon Sleeve. Needlelength 60-70Mmdiameter 920 ?Length Of Silicone Rod 40Cm, Length Of Silicon Sleeve 0.7 Mm. , Reusable Anaesthetia Face Mask Of Siliconesize 0 Autocalvable & Pure Transparent. Us Fda Approved And Size Should Be Mentioned On Mask. , Reusable Anaesthetia Face Mask Of Silicone Size 1 Autocalvable & Pure Transparent. Us Fda Approved And Size Should Be Mentioned On Mask. , Reusable Anaesthetia Face Mask Of Siliconesize2 Autocalvable & Pure Transparent. Us Fda Approved And Size Should Be Mentioned On Mask. , Reusable Anaesthetia Face Mask Of Siliconesize 3 Autocalvable & Pure Transparent. Us Fda Approved And Size Should Be Mentioned On Mask. , Reusable Anaesthetia Face Mask Of Siliconesize 4 Autocalvable & Pure Transparent. Us Fda Approved And Size Should Be Mentioned On Mask. , Reusable Anaesthetia Face Mask Of Siliconesize 5 Autocalvable & Pure Transparent. Us Fda Approved And Size Should Be Mentioned On Mask. , Flow Regulator Extension Set Flow Rate 2Ml To 350Ml Per Hour , Sterile Disposable Hypodermic Needle No. 18X1½ , Sterile Disposable Hypodermic Needleno. 21X1½ , Sterile Disposable Hypodermic Needle No. 23X1½ , Neonatal Single Heated Wire Breathing Systemwith Autofill Humidification Chamber In Sterile Pack And Us Fda Approved. Should Be Compatible Every Humidifier. , Paed. Single Heated Wire Breathing Systemwith Autofill Humidification Chamber In Sterile Pack And Us Fda Approved. Should Be Compatible Every Humidifier. , Adult Single Heated Wire Breathing Systemwith Autofill Humidification Chamber In Sterile Pack And Us Fda Approved. Should Be Compatible Every Humidifier. , Neonatal High Flow Nasal Cannula Having8 Litre Flow. Should Have Soft Tip . , Pur-Xro Catheter 20 Cm, 28G/1Fr Picc Line With Stylet, Splitting Needle With Securing Wings With 8 Cm Extension Tubing (Flow Rate 1Ml/Min) , Pur-Xro Catheter 30 Cm, 24G/2Fr Picc Line With Split Cannula And 10Cm Extension Tubing Over Catheter (Flow Rate 0.2Ml/Min) , Dead Body Bag 7X3 Ft Size Leak Proof Material Pp Closed On All Other Sides And Zipped On Front Or On 3 Sides , Introducer Sheath With Puncture Needle For Adults(Size 4 Fr.)(Standard Length) Us Fda Approved· 10-11 Cm Long· Pack Must Include 18 G, 6-7.5 Cm Long Puncture Needle: 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Introducer Sheath With Puncture Needle For Adults (Size . 9Fr.)(Standard Length) Us Fda Approved· 10-11 Cm Long· Pack Must Include 18 G, 6-7.5 Cm Long Puncture Needle: 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Intoducer Sheath For Adults (Size 10 Fr..)(Standard Length) Us Fda Approved Us Fda + Ce/ Dgci Approved· 10-11 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eyefor Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertionus Fda + Ce/ Dgci Approved , Intoducer Sheath For Adults (Size 11 Fr.)(Standard Length) Us Fda Approved Us Fda + Ce/ Dgci Approved· 10-11 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertionus Fda + Ce/ Dgci Approved , Long Introducer Sheath (20-30 Cm Long) (Size 5Fr..) Us Fda + Ce/ Dgci Approved· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 6Fr.) Us Fda + Ce/ Dgci Approved· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 7Fr.) Us Fda + Ce/ Dgci Approved· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 8Fr) Us Fda + Ce/ Dgci Approved· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 9Fr.) Us Fda + Ce/ Dgci Approved· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long)(Size 10Fr..) Us Fda + Ce/ Dgci Approved· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long)(Size 11Fr.) Us Fda + Ce/ Dgci Approved· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 4F Us Fda + Ce/ Dgci Approved· Sizes 4 French 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 5F Us Fda + Ce/ Dgci Approved· Szes 5 French 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 6F Us Fda + Ce/ Dgci Approved· Sizes6 French 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Steerable Introducer Sheeths 5F Us Fda + Ce/ Dgci Approved· Sizes 5 F Size 55 To 90 Cms· To Provide Greater Access To Reaching Target With Ergonomic Handle Design·Movable Tip For Different Curves And Torquability To Ready Vessel , Steerable Introducer Sheeths 6Fr Us Fda + Ce/ Dgci Approved· Sizes 6 F Size 55 To 90 Cms· To Provide Greater Access To Reaching Target With Ergonomic Handle Design· Movable Tip For Different Curves And Torquability To Ready Vessel , Steerable Introducer Sheeths 7F Us Fda + Ce/ Dgci Approved· Sizes7f Size 55 To 90 Cms· To Provide Greater Access To Reaching Target With Ergonomic Handle Design· Movable Tip For Different Curves And Torquability To Ready Vessel , Steerable Introducer Sheeths 8Fus Fda + Ce/ Dgci Approved· Sizes 8F Size 55 To 90 Cms·To Provide Greater Access To Reaching Target With Ergonomic Handle Design· Movable Tip For Different Curves And Torquability To Ready Vessel , Steerable Introducer Sheeths 9F Us Fda + Ce/ Dgci Approved· Sizes 9F· Size 55 To 90 Cms· To Provide Greater Access To Reaching Target With Ergonomic Handle Design· Movable Tip For Different Curves And Torquability To Ready Vessel , Steerable Introducer Sheeths 10F Us Fda + Ce/ Dgci Approved· Sizes 10F Size 55 To 90 Cms· To Provide Greater Access To Reaching Target With Ergonomic Handle Design· Movable Tip For Different Curves And Torquability To Ready Vessel , Steerable Introducer Sheeths 11F Us Fda + Ce/ Dgci Approved· Sizes 11F Size 55 To 90 Cms· To Provide Greater Access To Reaching Target With Ergonomic Handle Design· Movable Tip For Different Curves And Torquability To Ready Vessel , Steerable Introducer Sheeths 12F Us Fda + Ce/ Dgci Approved· Sizes 12 F Size 55 To 90 Cms· To Provide Greater Access To Reaching Target With Ergonomic Handle Design· Movable Tip For Different Curves And Torquability To Ready Vessel , Long Braded Introducer Sheath – Us Fda Approved Us Fda + Ce/ Dgci Approved· Sizes 6 French Should Be 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant ·With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Braded Introducer Sheath – Us Fda Approved Us Fda + Ce/ Dgci Approved· Sizes 7 French Should Be 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Braded Introducer Sheath – Us Fda Approved Us Fda + Ce/ Dgci Approved· Sizes 8 French Should Be 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Braded Introducer Sheath – Us Fda Approved Us Fda + Ce/ Dgci Approved· Sizes 9 French Should Be 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Braded Contra Lateral Introducer Sheath Us Fda + Ce/ Dgci Approved· Sizes 6 French Should Be 20 - 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Braded Contra Lateral Introducer Sheath Us Fda + Ce/ Dgci Approved· Sizes 7 French Should Be 20 - 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Ins Ertion , Long Braded Contra Lateral Introducer Sheath Us Fda + Ce/ Dgci Approved· Sizes 8 French Should Be 20 - 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Braded Contra Lateral Introducer Sheath Us Fda + Ce/ Dgci Approved· Sizes 9 French Should Be 20 - 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Introducer Sheath (30-50 Cm Long) (Size 5Fr..) Us Fda + Ce/ Dgci Approved Between 30-50 Cm Long · 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (30-50 Cm Long) (Size 6 Fr..) Us Fda + Ce/ Dgci Approved· Between 30-50 Cm Long · 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (30-50 Cm Long) (Size 7Fr.) Us Fda + Ce/ Dgci Approved· Between 30-50 Cm Long · 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (30-50 Cm Long) (Size 8Fr.) Us Fda + Ce/ Dgci Approved· Between 30-50 Cm Long · 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (30-50 Cm Long) (Size 9Fr.) Us Fda + Ce/ Dgci Approved· Between 30-50 Cm Long · 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (30-50 Cm Long)(Size 10Fr..) Us Fda + Ce/ Dgci Approved· Between 30-50 Cm Long · 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (30-50 Cm Long)(Size 11Fr.) Us Fda + Ce/ Dgci Approved· Between 30-50 Cm Long · 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Size 4 French Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved·Size 5 French Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Size 6 French Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Size 7 French Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Us Fda + Ce/ Dgci Approved· Size 5 French Should Be 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Introducer Sheath Us Fda + Ce/ Dgci Approved· Size 6 French Should Be 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Introducer Sheath Us Fda + Ce/ Dgci Approved· Size 7 French Should Be 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Long Introducer Sheath Us Fda + Ce/ Dgci Approved· Size 8 French Should Be 90 Cm And Above· 0.021 Or 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion , Ptfe Coated Diagnostic Guide Wire – (Regular Length, Regular Stiffness)Us Fda + Ce/ Dgci Approved· Should Be Available In 0.025 Inches Size· Should Be Between 145-180 Cm Long· Should Be Available As Straight & J-Shaped Tip· Should Be Available In Variable Lengths Of Flexible/Floppy End· Should Be Available In Variable J Tip Sizes· Should Be Available Fixed As Well As Movable Core. , Ptfe Coated Diagnostic Guide Wire – (Regular Length, Regular Stiffness)Us Fda + Ce/ Dgci Approved· Should Be Available In0.032 Inches Size· Should Be Between 145-180 Cm Long· Should Be Available As Straight & J-Shaped Tip· Should Be Available In Variable Lengths Of Flexible/Floppy End· Should Be Available In Variable J Tip Sizes· Should Be Available Fixed As Well As Movable Core. , Ptfe Coated Diagnostic Guide Wire – (Regular Length, Regular Stiffness)Us Fda + Ce/ Dgci Approved· Should Be Available In 0.035Size· Should Be Between 145-180 Cm Long· Should Be Available As Straight & J-Shaped Tip· Should Be Available In Variable Lengths Of Flexible/Floppy End· Should Be Available In Variable J Tip Sizes· Should Be Available Fixed As Well As Movable Core. , Ptfe Coated Diagnostic Guide Wire – (Regular Length, Regular Stiffness)Us Fda + Ce/ Dgci Approved· Should Be Available In0.038 Inches Size· Should Be Between 145-180 Cm Long· Should Be Available As Straight & J-Shaped Tip· Should Be Available In Variable Lengths Of Flexible/Floppy End· Should Be Available In Variable J Tip Sizes· Should Be Available Fixed As Well As Movable Core. , Ptfe Coated Diagnostic Guide Wire – (Exchange Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.025 Inches Size· Should Be 240-300 Cm Long· Should Be Available As Straight Or J-Shaped Tip· Should Be Available Fixed As Well As Movable Core. , Ptfe Coated Diagnostic Guide Wire – (Exchange Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.032, Inches Size· Should Be 240-300 Cm Long· Should Be Available As Straight Or J-Shaped Tip· Should Be Available Fixed As Well As Movable Core. , Ptfe Coated Diagnostic Guide Wire – (Exchange Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In , 0.035 Inches Size· Should Be 240-300 Cm Long· Should Be Available As Straight Or J-Shaped Tip· Should Be Available Fixed As Well As Movable Core. , Ptfe Coated Diagnostic Guide Wire – (Exchange Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In0.038 Inches Size· Should Be 240-300 Cm Long· Should Be Available As Straight Or J-Shaped Tip· Should Be Available Fixed As Well As Movable Core. , Ptfe Coated Diagnostic 0.032 Inch Guide Wire – (Exchange Length, Extra Stiff Shaft Strength)-Amplatz Type Us Fda + Ce/ Dgci Approved· Should Be Available In 0.032 Inches Size· Should Be Between 240-300 Cm Long· Should Be Available As Straight & J-Shaped Tip , Ptfe Coated Diagnostic 0.032 Inch Guide Wire – (Exchange Length, Extra Stiff Shaft Strength)-Amplatz Type Us Fda + Ce/ Dgci Approved· Should Be Available In 0.035 Inches Size· Should Be Between 240-300 Cm Long· Should Be Available As Straight & J-Shaped Tip , Ptfe Coated Diagnostic 0.032 Inch Guide Wire – (Exchange Length, Extra Stiff Shaft Strength)-Amplatz Type Us Fda + Ce/ Dgci Approved· Should Be Available In 0.038 Inches Size· Should Be Between 240-300 Cm Long· Should Be Available As Straight & J-Shaped Tip , Hydrophilic Diagnostic Guide Wire – Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.025 Inches Size· Should Have Superelastic Alloy Core·Should Have Super Flexible Wire Tip·Should Be Available In Straight And Angled Tip·Should Be Between 120-300 Cm Long , Hydrophilic Diagnostic Guide Wire – Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.032 Inches Size·Should Have Superelastic Alloy Core·Should Have Super Flexible Wire Tip·Should Be Available In Straight And Angled Tip·Should Be Between 120-300 Cm Long , Hydrophilic Diagnostic Guide Wire – Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved·Should Be Available In0.035 Inches Size·Should Have Superelastic Alloy Core·Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Hydrophilic Diagnostic Guide Wire – Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In0.038 Inches Size·Should Have Superelastic Alloy Core·Should Have Super Flexible Wire Tip·Should Be Available In Straight And Angled Tip·Should Be Between 120-300 Cm Long , Radiofocus Miniplastic Guidewire (, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Sould Be Available In 0.025Inchessize· Should Have Superelastic Alloy Core·Should Have Super Flexible Wire Tip·Should Be Available In Straight And Angled Tip·Should Be Between 150-180 Cm Long , Radiofocus Miniplastic Guidewire (, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Sould Be Available In0.032, Inches Size· Should Have Superelastic Alloy Core·Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 150-180 Cm Long , Radiofocus Miniplastic Guidewire (, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Sould Be Available In0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip·Should Be Between 150-180 Cm Long , Radiofocus Miniplastic Guidewire (, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Sould Be Available In0.038 Inches Size·Should Have Superelastic Alloy Core·Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip·Should Be Between 150-180 Cm Long , Radiofocus Miniplastic Guidewire (Long Length) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.025,Inches Size· Should Have Superelastic Alloy Core·Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 260Cm, 300 Cm50-180 Cm Longus Fda + Ce/ Dgci Approved , Radiofocus Miniplastic Guidewire (Long Length) Us Fda + Ce/ Dgci Approved· Should Be Available In0.032 Inches Size· Should Have Superelastic Alloy Core·Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip·Should Be Between 260Cm, 300 Cm50-180 Cm Longus Fda + Ce/ Dgci Approved , Radiofocus Miniplastic Guidewire (Long Length) Us Fda + Ce/ Dgci Approved· Should Be Available In0.038 Inches Size·Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip·Should Be Available In Straight And Angled Tip·Should Be Between 260Cm, 300 Cm50-180 Cm Longus Fda + Ce/ Dgci Approved , Judkins Catheter (Jr)Right Judkins Catheters In Various Standard Curves And Lengths. Size -4 French , Judkins Catheter (Jr) Right Judkins Catheters In Various Standard Curves And Lengths. Size -5 French , Judkins Catheter (Jr) Right Judkins Catheters In Various Standard Curves And Lengths. Size -6 French , Judkins Catheter (Jr)Right Judkins Catheters In Various Standard Curves And Lengths. Size -7 French , Judkins Catheter (Jr) Right Judkins Catheters In Various Standard Curves And Lengths. Size -8 French , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Leftjudkins Catheters In Various Standard Curves And Lengths. Size -4 French , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Leftjudkins Catheters In Various Standard Curves And Lengths. Size -5 French , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Leftjudkins Catheters In Various Standard Curves And Lengths. Size -6 French , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Leftjudkins Catheters In Various Standard Curves And Lengths. Size -7 French , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Leftjudkins Catheters In Various Standard Curves And Lengths.Size 8 French , Judkins Catheter Pigtail Us Fda + Ce/ Dgci Approved Left And Right Judkins Catheters In Various Standard Curves And Lengths. Size -4 French , Judkins Catheter Pigtail Us Fda + Ce/ Dgci Approved Left And Right Judkins Catheters In Various Standard Curves And Lengths. Size -5 French , Judkins Catheter Pigtail Us Fda + Ce/ Dgci Approved Left And Right Judkins Catheters In Various Standard Curves And Lengths. Size -6 French , Judkins Catheter Pigtail Us Fda + Ce/ Dgci Approved Left And Right Judkins Catheters In Various Standard Curves And Lengths. Size -7 French , Judkins Catheter Pigtail Us Fda + Ce/ Dgci Approved Left And Right Judkins Catheters In Various Standard Curves And Lengths. Size -8 French , Multipurpose Catheterus Fda + Ce/ Dgci Approvedmultipurpose Catheters In Various Standard Curves And Lengths. Size -4 French , Multipurpose Catheterus Fda + Ce/ Dgci Approvedmultipurpose Catheters In Various Standard Curves And Lengths. Size -5 French , Multipurpose Catheterus Fda + Ce/ Dgci Approvedmultipurpose Catheters In Various Standard Curves And Lengths. Size -6 French , Multipurpose Catheterus Fda + Ce/ Dgci Approvedmultipurpose Catheters In Various Standard Curves And Lengths. Size -7 French , Multipurpose Catheterus Fda + Ce/ Dgci Approvedmultipurpose Catheters In Various Standard Curves And Lengths. Size -8 French , Amplatz Catheterus Fda + Ce/ Dgci Approved Amplatz Left (Al)Catheter In Various Standard Curves And Lengths. Size -4 French , Amplatz Catheterus Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. Size -5 French , Amplatz Catheterus Fda + Ce/ Dgci Approved Amplatz Left (Al)Catheter In Various Standard Curves And Lengths. Size -6 French , Amplatz Catheterus Fda + Ce/ Dgci Approved Amplatz Left (Al)Catheter In Various Standard Curves And Lengths. Size -7 French , Amplatz Catheterus Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. Size -8 French , Amplatz Catheterus Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. Size -4 French , Amplatz Catheterus Fda + Ce/ Dgci Approvedamplatz Right (Ar) Catheter In Various Standard Curves And Lengths. Size -5 French , Amplatz Catheterus Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. Size -6 French , Amplatz Catheterus Fda + Ce/ Dgci Approvedamplatz Right (Ar) Catheter In Various Standard Curves And Lengths. Size -7 French , Amplatz Catheterus Fda + Ce/ Dgci Approvedamplatz Right (Ar) Catheter In Various Standard Curves And Lengths. Size -8 French , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. Size -4 French , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. Size -5 French , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. Size -6 French , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. Size -7 French , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. Size -8 French , By-Pass Graft Catheterus Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. Size -4 French , By-Pass Graft Catheterus Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. Size -5 French , By-Pass Graft Catheterus Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. Size -6 French , By-Pass Graft Catheterus Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. Size -7 French , By-Pass Graft Catheterus Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. Size -8 French , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved . Size -4 French , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved. Size -5 French , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved. Size -6 French , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved. Size -7 French , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved. Size -8 French , Nih Catheterus Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths.4 French , Nih Catheterus Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths.5 French , Nih Catheterus Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths.6 French , Nih Catheterus Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths.7 French , Nih Catheterus Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths.8 French , Cournard Catheter Us Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths. 4 French , Cournard Catheter Us Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths. 5 French , Cournard Catheter Us Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths. 6 French , Cournard Catheter Us Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths. 7 French , Cournard Catheter Us Fda + Ce/ Dgci Approved ·In Various Standard Curves And Lengths. 8 French , Introducer Sheaths For Pediatric Use (Size 4 Fr.) With J Tip/Straight Introducer Wire Us Fda + Ce/ Dgci Approved· Between 5.5-7.5 Cm Long· 0.021 Inch Straight Introducer Guide Wire· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant· With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· Should Have Smooth And Resistance Free Insertion , Introducer Sheaths For Pediatric Use (Size 5 Fr.) With J Tip/Straight Introducer Wire Us Fda + Ce/ Dgci Approved· Between 5.5-7.5 Cm Long· 0.021 Inch Straight Introducer Guide Wire· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant· With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· Should Have Smooth And Resistance Free Insertion , Introducer Sheaths For Pediatric Use (Size 6 Fr.) With J Tip/Straight Introducer Wire Us Fda + Ce/ Dgci Approved· Between 5.5-7.5 Cm Long· 0.021 Inch Straight Introducer Guide Wire· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant· With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· Should Have Smooth And Resistance Free Insertion , Judkins Catheter (Pediatric) (Size 4 Fr.)Us Fda + Ce/ Dgci Approved·Left And Right Judkins Catheters In Various Standard Curves And Lengths· Must Be Fda Approved , Judkins Catheter (Pediatric) (Size 5 Fr.)Us Fda + Ce/ Dgci Approved·Left And Right Judkins Catheters In Various Standard Curves And Lengths· Must Be Fda Approved , Judkins Catheter (Pediatric) (Size 6 Fr.)Us Fda + Ce/ Dgci Approved·Left And Right Judkins Catheters In Various Standard Curves And Lengths· Must Be Fda Approved , Special Judkins Coronary Catheter With 2.5 Cm Curve (Pediatric) Us Fda + Ce/ Dgci Approved (Size 4 Fr.) , Special Judkins Coronary Catheter With 2.5 Cm Curve (Pediatric) Us Fda + Ce/ Dgci Approved (Size 5 Fr.) , Special Judkins Coronary Catheter With 2.5 Cm Curve (Pediatric) Us Fda + Ce/ Dgci Approved (Size 6 Fr.) , Angiographic Double Leumen Tracking Catheter Us Fda + Ce/ Dgci Approved (Size 4 Fr.) , Angiographic Double Leumen Tracking Catheter Us Fda + Ce/ Dgci Approved (Size 5 Fr.) , Angiographic Double Leumen Tracking Catheter Us Fda + Ce/ Dgci Approved (Size 6 Fr.) , 3- ‘French’ Diagnostic Catheters For Neonatal Use Us Fda + Ce/ Dgci Approved· Pigtail, Judkins, Multipurpose, Cobra And Other Diagnostic Catheters Of 3 Fr. Size·Varying Lengths And Shapes , Swan Ganz Catheter Us Fda + Ce/ Dgci Approved(Size 6 Fr.) , Swan Ganz Catheter Us Fda + Ce/ Dgci Approved(Size 7 Fr.) , Balloon Tipped Angiography Catheter Us Fda + Ce/ Dgci Approved (Size 5 Fr.) , Balloon Tipped Angiography Catheter Us Fda + Ce/ Dgci Approved (Size 6 Fr.) , Balloon Tipped Angiography Catheter Us Fda + Ce/ Dgci Approved (Size 7 Fr.) , Berman Catheter Us Fda + Ce/ Dgci Approved·(Size 4 Fr.) Sizes· Should Have 6-8 Holes Proximal To The Balloon For Dye Injection· Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter· 10 Cm Marking Along Catheter Body To Confirm Insertion Depth , Berman Catheter Us Fda + Ce/ Dgci Approved· (Size 5 Fr.) Should Have 6-8 Holes Proximal To The Balloon For Dye Injection·Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter·10 Cm Marking Along Catheter Body To Confirm Insertion Depth , Berman Catheter Us Fda + Ce/ Dgci Approved· (Size 6 Fr.) Should Have 6-8 Holes Proximal To The Balloon For Dye Injection·Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter·10 Cm Marking Along Catheter Body To Confirm Insertion Depth , Berman Catheter Us Fda + Ce/ Dgci Approved· (Size 7 Fr.) Should Have 6-8 Holes Proximal To The Balloon For Dye Injection· Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter· 10 Cm Marking Along Catheter Body To Confirm Insertion Depth , Reverse Berman Catheter Us Fda + Ce/ Dgci Approved· (Size 4 Fr.) Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter· Should Have Holes Proximal To The Balloon For Dye Injection· Should Have A Hole At The Proximal Tip To Allow The Passage Over The Wire , Reverse Berman Catheter Us Fda + Ce/ Dgci Approved· (Size 5 Fr.) Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter· Should Have Holes Proximal To The Balloon For Dye Injection· Should Have A Hole At The Proximal Tip To Allow The Passage Over The Wire , Reverse Berman Catheter Us Fda + Ce/ Dgci Approved· (Size 6 Fr.) Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter· Should Have Holes Proximal To The Balloon For Dye Injection· Should Have A Hole At The Proximal Tip To Allow The Passage Over The Wire , Reverse Berman Catheter Us Fda + Ce/ Dgci Approved· (Size 7 Fr.) Catheter Should Be Tapered At Tip To Ensure Uniform Diameter Of The Whole Catheter· Should Have Holes Proximal To The Balloon For Dye Injection· Should Have A Hole At The Proximal Tip To Allow The Passage Over The Wire , Arterial Pressure Monitor Lines (100 Cm Long)Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (150 Cm Long)Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (200 Cm Long)Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wireus Fda + Ce/ Dgci Approved· (Size 4 Fr.) 16 Cm And Above Long Length, With 0.035 Or 0.038 Inch Hydrophilic Mini Guide Wire .With Plastic Cannula For Arterial Puncture , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wireus Fda + Ce/ Dgci Approved· (Size 5 Fr.) 16 Cm And Above Long Length, With 0.035 Or 0.038 Inch Hydrophilic Mini Guide Wire .With Plastic Cannula For Arterial Puncture , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wireus Fda + Ce/ Dgci Approved·(Size6 Fr.) 16 Cm And Above Long Length,With 0.035 Or 0.038 Inch Hydrophilic Mini Guide Wire .With Plastic Cannula For Arterial Puncture , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wireus Fda + Ce/ Dgci Approved·(Size 7 Fr.)16 Cm And Above Long Length,With 0.035 Or 0.038 Inch Hydrophilic Mini Guide Wire .With Plastic Cannula For Arterial Puncture , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wireus Fda + Ce/ Dgci Approved· (Size 8 Fr.)16 Cm And Above Long Length, With 0.035 Or 0.038 Inch Hydrophilic Mini Guide Wire .With Plastic Cannula For Arterial Puncture , Straight Long Introducer Sheath With Hydrophilic Introducer Guide Wireus Fda + Ce/ Dgci Approved· (Size 9 Fr.)16 Cm And Above Long Length, With 0.035 Or 0.038 Inch Hydrophilic Mini Guide Wire .With Plastic Cannula For Arterial Puncture , Straight Reinforced Sheath With Hydrophilic Coating Us Fda + Ce/ Dgci Approved· (Size 6 Fr.) More Than60 Cm Long With Side Arm Port· With 0.035 Or 0.038 Inch Guide Wire Compatible·With Radio-Opaque Tip , Straight Reinforced Sheath With Hydrophilic Coating Us Fda + Ce/ Dgci Approved· (Size 7 Fr.) More Than60 Cm Long With Side Arm Port· With 0.035 Or 0.038 Inch Guide Wire Compatiblewith Radio-Opaque Tip , Straight Reinforced Sheath With Hydrophilic Coating Us Fda + Ce/ Dgci Approved (Size 8 Fr.) More Than60 Cm Long With Side Arm Port· With 0.035 Or 0.038 Inch Guide Wire Compatible· With Radio-Opaque Tip , Straight Reinforced Sheath With Hydrophilic Coating Us Fda + Ce/ Dgci Approved· (Size 9 Fr.) More Than60 Cm Long With Side Arm Port· With 0.035 Or 0.038 Inch Guide Wire Compatible·With Radio-Opaque Tip , Straight Reinforced Sheath With Hydrophilic Coating Us Fda + Ce/ Dgci Approved· (Size 10 Fr.) More Than60 Cm Long With Side Arm Port·With 0.035 Or 0.038 Inch Guide Wire Compatible·With Radio-Opaque Tip , Straight Reinforced Sheath With Hydrophilic Coating Us Fda + Ce/ Dgci Approved· (Size 11 Fr.) More Than60 Cm Long With Side Arm Port.With 0.035 Or 0.038 Inch Guide Wire Compatible· With Radio-Opaque Tip , Straight Reinforced Sheath With Hydrophilic Coating Us Fda + Ce/ Dgci Approved· (Size 12 Fr.) More Than60 Cm Long With Side Arm Port·With 0.035 Or 0.038 Inch Guide Wire Compatible With Radio-Opaque Tip , Long Sheath For Contra – Lateral Iliac/ Femoral Access Us Fda + Ce/ Dgci Approved· (Size 4 F) Should Be Kink Resistant With A Reinforcement Mechanism · Should Be Low Friction With Inner Coating To Allow Catheter Manipulation· Should Have Distal Radio-Opaque Tip For Enhanced Visibility On Fluoroscopy· Should Have Smooth Transition From Dilator To Seath· Should Have A Proximal Hemostasis Valve/ Provision For Tuohyborst Valve· Should Be Color Coded For Size Identification· Should Be Available In 4F Size With The Largest Id· Should Have Lengths Ranging From 40-110 Cm , Long Sheath For Contra – Lateral Iliac/ Femoral Access Us Fda + Ce/ Dgci Approved· (Size 5F) Should Be Kink Resistant With A Reinforcement Mechanism ·Should Be Low Friction With Inner Coating To Allow Catheter Manipulation· Should Have Distal Radio-Opaque Tip For Enhanced Visibility On Fluoroscopy·Should Have Smooth Transition From Dilator To Seath· Should Have A Proximal Hemostasis Valve/ Provision For Tuohyborst Valve· Should Be Color Coded For Size Identification· Should Be Available In 5F Size With The Largest Id· Should Have Lengths Ranging From 40-110 Cm , Long Sheath For Contra – Lateral Iliac/ Femoral Access Us Fda + Ce/ Dgci Approved· (Size 6 F) Should Be Kink Resistant With A Reinforcement Mechanism · Should Be Low Friction With Inner Coating To Allow Catheter Manipulation· Should Have Distal Radio-Opaque Tip For Enhanced Visibility On Fluoroscopy· Should Have Smooth Transition From Dilator To Seath·Should Have A Proximal Hemostasis Valve/ Provision For Tuohyborst Valve· Should Be Color Coded For Size Identification·Should Be Available In 6F Size With The Largest Id· Should Have Lengths Ranging From 40-110 Cm , Long Sheath For Contra – Lateral Iliac/ Femoral Access Us Fda + Ce/ Dgci Approved· (Size 7 F) Should Be Kink Resistant With A Reinforcement Mechanism · Should Be Low Friction With Inner Coating To Allow Catheter Manipulation·Should Have Distal Radio-Opaque Tip For Enhanced Visibility On Fluoroscopy·Should Have Smooth Transition From Dilator To Seath·Should Have A Proximal Hemostasis Valve/ Provision For Tuohyborst Valve· Should Be Color Coded For Size Identification· Should Be Available In 7 F Size With The Largest Id· Should Have Lengths Ranging From 40-110 Cm , Long Sheath For Contra – Lateral Iliac/ Femoral Access Us Fda + Ce/ Dgci Approved· (Size 8 F) Should Be Kink Resistant With A Reinforcement Mechanism ·Should Be Low Friction With Inner Coating To Allow Catheter Manipulation·Should Have Distal Radio-Opaque Tip For Enhanced Visibility On Fluoroscopy· Should Have Smooth Transition From Dilator To Seath·Should Have A Proximal Hemostasis Valve/ Provision For Tuohyborst Valve· Should Be Color Coded For Size Identification· Should Be Available In 8 F Size With The Largest Id· Should Have Lengths Ranging From 40-110 Cm , Long Sheath For Contra – Lateral Iliac/ Femoral Access Us Fda + Ce/ Dgci Approved· (Size 9 F) Should Be Kink Resistant With A Reinforcement Mechanism ·Should Be Low Friction With Inner Coating To Allow Catheter Manipulation· Should Have Distal Radio-Opaque Tip For Enhanced Visibility On Fluoroscopy· Should Have Smooth Transition From Dilator To Seath· Should Have A Proximal Hemostasis Valve/ Provision For Tuohyborst Valve· Should Be Color Coded For Size Identification· Should Be Available In9 F Size With The Largest Id· Should Have Lengths Ranging From 40-110 Cm , Mullin’S Sheath For Special Dilation Us Fda + Ce/ Dgci Approved (Size 6 F) Should Be In Septal Puncture Needle Should Be In -6Fseptal Puncture Needle , Angio.Kit/Ptca Kit (3 Port Many Fold With Attached Tubing One Pressure Line + Two Iv Set Connecting Tube And Two Leurlock Syringe ) Us Fda / Ce/ Approved , Micro Catheter For Super Selective Catherization Usfda/Ce Approved. 2.7 Fwith 130 Cm With 0. 021 Guide Wire , Micro Catheter For Super Selective Catherization Usfda/Ce Approved . 2.9 Fwith 130 Cm With 0. 021 Guide Wire , Micro Catheter For Super Selective Catherization Usfda/Ce Approved .2.7 F With 150 Cmwith 0. 021 Guide Wire , Micro Catheter For Super Selective Catherization Usfda/Ce Approved. 2.9 F With 150 Cmwith 0. 021 Guide Wire , Multi Side Port Catheter Infusion For Catheter Directed Thromobolysis Usa/Fda/Ce Approved. 5F /130 Cm ,15/20 Cm Holes Length,0.35 Compatible , Clot Retrieval Sheath Usa/Fda/Ce Approved Aspiration Catheter 16 Fincluding Flow Retriever Catheter 19-25 Mm,15-18Mm ,11-14 Mm , Clot Retrieval Sheath Usa/Fda/Ce Approved Aspiration Catheter 20 Fincluding Flow Retriever Catheter 19-25 Mm,15-18Mm ,11-14 Mm , Clot Retrieval Sheath Usa/Fda/Ce Approved Aspiration Catheter 24 Fincluding Flow Retriever Catheter 19-25 Mm,15-18Mm ,11-14 Mm , Loadable Microsphere For Embolisation Of Tumour Super Absobent Polymer Drug Eluting Microsphere For Tace (Trans Arterial Chemo Ambolization )Usa/Fda/Ce Approved. 30-60 Micorn , Loadable Microsphere For Embolisation Of Tumour Super Absobent Polymer Drug Eluting Microsphere For Tace (Trans Arterial Chemo Ambolization ) Usa/Fda/Ce Approved. 50-100Micron , Loadable Microsphere For Embolisation Of Tumoursuper Absobent Polymer Drug Eluting Microsphere For Tace (Trans Arterial Chemo Ambolization ) Usa/Fda/Ce Approved. 100-300 Micron , Pcd Set Puncture Needle 18G,0.035,J Stiff Stiff Wire 0.035/80 Cm ,Dilator Set ,Pig Tail /Malecot Catheter 8-24F , Ring Biliary Catheter Usa/Fda/Ce Approvedcatheter 8.5 F/10/3 Compatible 0.038 Length~40 Cm ,Catheter Side Ports -32 ,Side Port Segment Length 8 Cm ,Catheter Introducer, Stiffening Cannula ,Secured Device , Venaseal Closure System For Varicose Veins Usa/Fda Approved N Butyl Based Adhesive Formation 50/90/105/120 Cm 145 Cm(3/4/6/8 F ,014/0.35 Compatible , Liver Access And Biopsy Needle Set Usa/Fda Approved Usa/Fda Approved18g/60 Cm Biopsy Needle ,14 G Cannula /53.5 Cm Length Sheath 7F , Tran Jugular Intrahepatic Porto Sytemic Shunt (Tips Set )Intoducer 10F/40 Cm ,Toclar Diameter 0.038 Legth60 Cm ,Cannula 14 G/51.5 Cm , Percutaneous Gastrostomy Balloon Retention Tube Set Catheter -12-20 F,Length -10 Cm ,Balloon 5-20 Ml , Biopsy Guns(14G 10Cm) - Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Biopsy Guns(14G 16Cm) - Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Biopsy Guns(16G 10Cm) - Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Biopsy Guns(16G 16Cm)- Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Biopsy Guns(18G 10Cm)- Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Biopsy Guns(18G 16Cm)- Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Biopsy Guns (18G 20Cm)- Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Biopsy Guns (18G 25Cm )- Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Biopsy Guns(20G 10Cm)- Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Biopsy Guns (20G 16Cm)- Should Be Spring Loaded Disposable Automatic Biopsy Gun. Should Have One Handed Cocking Mechanism With Non-Roll Handle Design. Should Have Angled Deep Sample Notch For Enhanced Needle Action. Should Have Choice Of Two Firing Buttons/Dual Triger With Size Color Coding.Should Have Penetration Depth Of 22Mm.Should Have Sharp-Beveled Trocar.Should Have Round Ergonomic Handle With No-Fire Lock. Should Have Etched Needle Tip Is Grit Blasted. Should Be Available In Different Gauge Size 14,16,18,20 With Length Size Cm 10, 16,20, 25. Withcompatible Disposable Coaxial Needle:Should Be Available In All Sizes Compatible With Disposable Core Biopsy Instrument/Gun. Should Have Color Coded Depth Stopper That Indicate The Size And Match With Compatible Size Of Disposable Automatic Core Biopsy Gun/Instrument. Should Have Option Of Blunt Tip & Sharp Tip Trocar For Risk Free Penetration Option. Should Be Available In Gauze Size 13,15,17,19 With Different Length Size Cm 7.8, 13.8. Usfda/Ce Approved , Breast Localization Wire With Superior Migration Resistance - 20G N Length107mmshould Have Curved Locking Element That Provide Superior Migration Resistance. The Localization Wire Can Be Repositioned Or Removed After Placement If Required. Usfda/Ce Approved , Disposable Semi-Automatic Core Biopsy Instrument With Compatible Coaxial Needle. Should Be Available In Size Of 18 And 20 Gauges With Lengths Of 10, 16 And 20 Cm. Should Be Available With Dual Penetration Throw Of 10 And 20Mm In Single Instrument. Should Be Available With Fire Ready Indicator. Should Be Available With Compatible Coaxial Needle Set With A Blunt Tip Needle & Trocar Needle. Should Be Usfda Approved. , Ultra Clipdisposable Breast Tissue Marker Should Be Available In Coil Shape & Ribbon Shape. Should Have Color Coded Dual Triggers Identify Different Marker Shape. Should Be Visible In Ultrasound, Mri, Mammography Imaging. Should Be Available In Needle Size Of 17 Gauge 10 Cm. Should Be Available In Coil Shape And Ribbon Shape. , Bone Marrow Biopsy Needle With Diamond Bevel Tip & Tapered Distal Canula. Disposable Bone Marrow Biopsy Needle Should Have Ergonomic T- Handle Design With Seprate Handle Cap. Should Have Trocar/Diamond Tip For Easy Coring Of Bone. Should Have Triple Crown Cannula Tip With 6 Facets.Should Be Available With Narrow Acquition Cardle With Sample Size Verification Marking Should Be Available In 8G 4 & 6Usfda/Ce Approved , Bone Marrow Biopsy Needle With Diamond Bevel Tip & Tapered Distal Canula. Disposable Bone Marrow Biopsy Needle Should Have Ergonomic T- Handle Design With Seprate Handle Cap. Should Have Trocar/Diamond Tip For Easy Coring Of Bone. Should Have Triple Crown Cannula Tip With 6 Facets.Should Be Available With Narrow Acquition Cardle With Sample Size Verfication Marking Should Be Available In 11G 4 & 6Usfda/Ce Approved , Bone Marrow Biopsy Needle With Diamond Bevel Tip & Tapered Distal Canula. Disposable Bone Marrow Biopsy Needle Should Have Ergonomic T- Handle Design With Seprate Handle Cap. Should Have Trocar/Diamond Tip For Easy Coring Of Bone. Should Have Triple Crown Cannula Tip With 6 Facets.Should Be Available With Narrow Acquition Cardle With Sample Size Verfication Marking Should Be Available In 13G 3.5 Usfda/Ce Approved , Silicone Foleys Catheter (Sizes - 8Fr, 2-Way) With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter(Sizes - 10Fr, 2-Way)With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter(Sizes - 12Fr, 2-Way)With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter(Sizes - 14Fr, 2-Way)With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter(Sizes - 16Fr, 2-Way)With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter(Sizes - 18Fr, 2-Way)With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter(Sizes - 20Fr, 3-Way)With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Having Maryland Jaw Sealer And Divider With Wide Jaw Aperture 13Mm And Cut Length 18.5Mm With Shaft Rotation Of 350 Degrees And With One Step Sealing Mechanism. Should Have The Manual Cutting Mechanism.And It Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligature Technology Have Small Jaw Tissue Sealing System For Open Procedures Vessel Sealing Instrument With Cut Length Of 14.7 Mm, Seal Length Of 16.5Mm, Jaw Angle 28 Degrees. Should Have The Manual Cutting Mechanism.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligature Technology Laparoscopic Blunt Tipped Vessel Sealer And Divider 37 Cm Long 5Mm Instrument. Wide Jaw Aperture 14.5 Mm With Shaft Rotation Of 180 Degrees ; Multifunctional Laparoscopic Device For Tissue Fusion.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligasure Technology Instrument For Open Surgeries With Instrument Length Between 18-19Cm And Electrode Length Between 16-17Cm, Having 28 Degree Curved Jaw With Contoured Tip For Blunt Dissection And Having Activation Both Through Hand Activation And Foot Activation With A Manually Controlled Cutting Mechanism. , Cutting &Coagulations Device With Tissue Fusion Ligasuretechnologyhave36mm Jaw Length, 180 Degree Rotatable Instrument With Curved Blade For Large Volume Tissue. Should Have The Manual Cutting Mechanism. , Cutting &Coagulations Device With Tissue Fusion Ligasuretechnologyhave Vessel Sealing Instrument For Open Surgeries Withreusable Clamp Length Between 16-18Cm, With 12-14 Degree Jaw Curve.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Double Lumen Catheter (Size- 11.5 Frx13.5 Cm) With Kit Internal Juglar / Straight( Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot , Double Lumen Catheter (Size- 12 Frx13 Cm) With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot , Double Lumen Catheter (Size- 8 Frx9 Cm) With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot , Double Lumen Catheter (Size- 10 Frx12 Cm) With Kit Internal Juglar / Straight(Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot , Double Lumen Catheter (Size- 12 Frx16 Cm) With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot , Double Lumen Catheter (Size- 12 Frx13 Cm) With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot , Long Term Double Lumen Dialysis Catheter (Size- 14.5 Frx19 Cm) With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Long Term Double Lumen Dialysis Catheter (Size- 14.5 Frx23 Cm) With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Long Term Double Lumen Dialysis Catheter (Size- 15 Fr X 19 Cm) With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Long Term Double Lumen Dialysis Catheter (Size- 15 Fr X 23 Cm) With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Transperant Surgical Wound Dressing Wuth A Dimensional Hydrocellularpad Microbicidle Proteciton And Anti Microbial Property (Size- 6X 7) , Transperant Surgical Wound Dressing Wuth A Dimensional Hydrocellularpad Microbicidle Proteciton And Anti Microbial Property (Size- 10X15) , Transperant Surgical Wound Dressing Wuth A Dimensional Hydrocellularpad Microbicidle Proteciton And Anti Microbial Property (Size- 20X25) , Transperant Surgical Wound Dressing Wuth A Dimensional Hydrocellularpad Microbicidle Proteciton And Anti Microbial Property (Size- 10X30) , Transperant Surgical Wound Dressing Wuth A Dimensional Hydrocellularpad Microbicidle Proteciton And Anti Microbial Property (Size- 10X40) , Non-Fibre Optic Single Use Adult Scope Channel Width :2.2 Mm Insertion Tube Diameter:5.0Mm. Working Length:600 Mm Bending Range :180 Degree Up & 180 Degree Down Field Of View :85 Degree Or More Direction Of View : 0 Degree (Forward View) Depth Of Field :8-50 Mm Or Better Minimum Ett Inner Dia :6 Mm Illumination Method :Led Complete System Should Be Us-Fda And European Ce Certified , Multi-Vent Mask Pediatric, Multi-Vent Mask Pediatric, Air Entrainment Masks, Must Be Safe, Simple Delivery Of Variable Oxygen Concentrations. Each Mask To Includes Color-Coded Diluters: Green For Low Concentration, White For Medium Concentration. Locking Ring To Secure Flow Setting. Must Include Adaptor For High Humidity Entrainment. Complete Kit With 7-Ft Oxygen Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Incentive Spirometerincentive Spirometer With Wide Flow Range Between 200 Cc/Sec And 1200 Cc/Sec. Must Have Dual-Chamber Design To Help Create Constant Resistance That Lifts Ball When Patient Maintains Inspiration Equal To Selected Adjustable Flow Setting & Clearly Marked Flow Settings For Easy Monitoring. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification , Closed Suction Catheter Mdi Port 12 Fr. Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip With Mdi Port.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Zig-Zag Ports For Better Suctioning. Twin Peep Seals. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. , Closed Suction Catheter Mdi Port 14 Fr. Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip With Mdi Port.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Zig-Zag Ports For Better Suctioning. Twin Peep Seals. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. , Closed Suction Catheter 12 Fr.Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Zig-Zag Ports For Better Suctioning. Twin Peep Seals. Available In Both Endotracheal And Tracheostomy Version.Can Be Used For 72Hr. , Closed Suction Catheter 14 Fr.Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Zig-Zag Ports For Better Suctioning. Twin Peep Seals. Available In Both Endotracheal And Tracheostomy Version.Can Be Used For 72Hr. , Fenestrated Tracheostomy Tube Cuffed With 2 Inner Cannula, Inner Cannula Should Reduce The Id By 1Mm Of Tracheostomy Tube One Inner Cannula Is With Five Fenestration Holes And One Is Without Fenestration , Multifocal Iolbiconvex, Single Piece Designoptic Size 6 Mm, Overall 12-13 Mm Sizetwo Haptics, Modified Cuv Blocking Capability360 Degrees Square Edge, Sterile Packingfoldable Lens With Insertion Via Injector, Should Able To Insert In Sub 2.8 M.Msterile Disposable Injector With Cartridge Along With Each Iolinjector Should Be Of Good Quality With Smooth Injection Without Damaging Ioldiopters Required +16 To +25 Ddiffractive Multifocal Design With +3 To +4 Dioptre Additionshould Be Iso Or Ce Certifiedmanufacturer Should Be Asked To Supply Samples For Approval3 Piece Feldable 11-28 D , Glaucoma Drainage Implant (Valved) With Silicon Tubeadult (184Mm2) , Glaucoma Drainage Implant (Valved) With Silicon Tube Paediatric (96Mm2) , Eye Sphere Implantsimplantable Gradepmma Sphere For Enclueation And Evisceration Procedure (Pmma) Size / Sphere Diameter -14Mm, , Eye Sphere Implantsimplantable Gradepmma Sphere For Enclueation And Evisceration Procedure (Pmma) Size / Sphere Diameter -16Mm, , Eye Sphere Implantsimplantable Gradepmma Sphere For Enclueation And Evisceration Procedure (Pmma) Size / Sphere Diameter -18Mm, , Eye Sphere Implantsimplantable Grade Pmma Sphere For Enclueation And Evisceration Procedure (Pmma) Size / Sphere Diameter - 20Mm, , Eye Sphere Implantsimplantable Gradepmma Sphere For Enclueation And Evisceration Procedure (Pmma) Size / Sphere Diameter -22Mm, , Eye Sphere Implantsimplantable Grade Siliconesphere For Enclueation And Evisceration Procedure (Silicone) Size / Sphere Diameter -14Mm, , Eye Sphere Implantsimplantable Grade Siliconesphere For Enclueation And Evisceration Procedure (Silicone) Size / Sphere Diameter -16Mm, , Eye Sphere Implantsimplantable Grade Silicone Sphere For Enclueation And Evisceration Procedure (Silicone) Size / Sphere Diameter -18Mm, , Eye Sphere Implantsimplantable Grade Siliconesphere For Enclueation And Evisceration Procedure (Silicone) Size / Sphere Diameter -20Mm, , Eye Sphere Implantsimplantable Grade Siliconesphere For Enclueation And Evisceration Procedure (Silicone) Size / Sphere Diameter -22Mm, , Monocanalicular Self Retaining Silicone Stent For Canalicular Repair - Medical Graded Silicone Implant Forreconstructing Traumaticcanalicular Lacerations.Silicone Rod Length40mm, Silicone Rod Diameter 0.64 Mm , Lacrimal Intubation Set For Dcr Surgery – Bicanalicular Lacrimal Intubation Set Comprised Oftwo Flexible Stainless Steel Probes Attached Through A Hollow Medicaltube Which Is Used In Conventional Dcr Procedure. Probe Length Probe Diameter Silicon Tube Lengthsilicon Tube Idsilicon Tube Od - 11 Cm 0.60 Mm (23G)30 Cm0.30 Mm 0.64 Mm , Scleral Fixiated Intraoccular Lense Having Multifoccal Toric ,Three Piece Foldable Intraoccular Lense , Vibratory Pep Therapy Device For Pead . Patients , Deliver Airflow Vibrations To The Patients From 5-30 Hzexpiratory Resistance / Frequency Dial To Allow Therapy To Be Adjusted To Patientss Needs , Tracheostomy Tube Cuffed With Sub-Glotic Suction Line And With 2 Inner Cannula Kit, Inner Cannula Should Reduce The Id By 1Mm Of Tracheostomy Tube , Dry Lithium Heparin Pre Filled Abg Syringe With Airremoval Filter Cap 1Ml , Dry Lithium Heparin Pre Filled Abg Syringe With Airremoval Filter Cap 3Ml , Epidural And Spinal Needle Kit 16/18G- Should Have Needle To Needle Technique Without Backeye On Epidural Needle With Lenght Of 8Cm . Should Have Locking Mechanism With Graduation Marking On Hub Of Epidural Needle And Pencil Point Spinal Needle , Should Have The Marking On The Epidural Needle With 1 Cm Distance And Marking Should Starts From 3 Cm Distance From The Tip Of The Epidural Needle . , Epidural Kit With Epidural Needle Marking Starts From 3Cm From The Tip And Catheter Fixation Device With Locking Mechanism 16/18G , Central Line Triple Lumen With Y Needle And Nitinol Guide Wire 8.5 Fr With 16Cm / 20Cm Catheter With Tecoflex Material , Central Line Quadra Lumen With Y Needle And Nitinol Guide Wire 8.5 Fr With 15Cm / 20Cm Catheter With Tecoflex Material , Central Line Quadra Lumen With Straight Needle And Nitinol Guide Wire 8.5 Fr With 15Cm / 20Cm Catheter With Tecoflex Material , Peripherally Inserted Central Line For High Flow/ Power Injection Sterile Made Of Polyurethane Single 55 Cm Long, 4 French Single Lumen Made Of Polyutherane With Guide Wire & Microintroducer. Should Deliever Infusion At 5 Ml/Sec Rate And Have Reverse Taper Hub To Provide Kink Resitance. Introducer Needle Of 21 G. And Used For Power Injection & Monitoring Cvp . , Peripherally Inserted Central Line For High Flow/ Power Injection Sterile Made Of Polyurethane Single 55 Cm Long, 4 French Doublelumen Made Of Polyutherane With Guide Wire & Microintroducer. Should Deliever Infusion At 5 Ml/Sec Rate And Have Reverse Taper Hub To Provide Kink Resitance. Introducer Needle Of 21 G. And Used For Power Injection & Monitoring Cvp . , Peripherally Inserted Central Line For High Flow/ Power Injection Sterile Made Of Polyurethane Single 55 Cm Long, 5 French Singlelumen Made Of Polyutherane With Guide Wire & Microintroducer. Should Deliever Infusion At 5 Ml/Sec Rate And Have Reverse Taper Hub To Provide Kink Resitance. Introducer Needle Of 21 G. And Used For Power Injection & Monitoring Cvp . , Peripherally Inserted Central Line For High Flow/ Power Injection Sterile Made Of Polyurethane Single 55 Cm Long, 5 French Doublelumen Made Of Polyutherane With Guide Wire & Microintroducer. Should Deliever Infusion At 5 Ml/Sec Rate And Have Reverse Taper Hub To Provide Kink Resitance. Introducer Needle Of 21 G. And Used For Power Injection & Monitoring Cvp . , Peripherally Inserted Central Line For High Flow/ Power Injection Sterile Made Of Polyurethane Single 55 Cm Long, 5 French Triple Lumen Made Of Polyutherane With Guide Wire & Microintroducer. Should Deliever Infusion At 5 Ml/Sec Rate And Have Reverse Taper Hub To Provide Kink Resitance. Introducer Needle Of 21 G. And Used For Power Injection & Monitoring Cvp . , Latex Folley Balloon Catheter No. 6 , Latex Folley Balloon Catheter No. 12 , Ryle’S Tube No. 6 , Ryle’S Tube No. 8 , Post Operative Surgical Cover Dressings Hydrofiber Dressings(9X25 Cm) With 1.2% W/W Impregnated Ionic Silver & Tripple Hydrocolloid Matrix Dressings With Broad Spectrum Bactricidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , Post Operative Surgical Cover Dressings Hydrofiber Dressings (9X30cm) With 1.2% W/W Impregnated Ionic Silver & Tripple Hydrocolloid Matrix Dressings With Broad Spectrum Bactricidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , Post Operative Surgical Cover Dressingshydrofiber Dressings (9X35 Cm ) With 1.2% W/W Impregnated Ionic Silver & Tripple Hydrocolloid Matrix Dressings With Broad Spectrum Bactricidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , 2 Pcs Flat Base Ostomy Body Fit60 Mm Kit 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm, Elastic Tape In Semi-Circular Shape With Hydrocolloid Adhesive For Extra Security Of Base Plate. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm), Neutral Grey Colour Standerd Sizebelt Compatible For Bags Having 4 Ear Hooks , 2 Pcs Flat Base Ostomy Body Fit 70 Mm Kit 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. One Side Transparent For Inspection. 70Mm.Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm), Neutral Grey Colour Standerd Sizebelt Compatible For Bags Having 4 Ear Hooks , 2 Pcs Convex Base Ostomy Body Fit60 Mm Kit Two-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm.Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm)Neutral Grey Colour Standerd Sizebelt Compatible For Bags Having 4 Ear Hooks , 2 Pcs Convex Base Ostomybody Fit70 Mm Kittwo-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 70Mm.Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm), Neutral Grey Colour Standerd Sizebelt Compatible For Bags Having 4 Ear Hooks , 1 Pcs Trasnparent Colostomy Body Fit60mm Kit One-Piece Colostomy Bag- Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.34 N/Mm), Bag Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. One Side Transparent For Inspection 60Mm.Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm) , 2 Pcs Flat Base Ostomy Body Fit Bag 60 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm , 2 Pcs Flat Base Ostomy Body Fit Bag 70 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. One Side Transparent For Inspection. 70Mm. , 2 Pcs Convex Base Ostomy Body Fit Bag 60 Mm Two-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm. , 2 Pcs Convex Base Ostomybody Fit Bag 70 Mm Two-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 70Mm. , 1 Pcs Trasnparent Colostomy Body Fit Bag 60Mmone-Piece Colostomy Bag- Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.34 N/Mm), Bag Consists One Barrier Foil And A Oecotex Certifiedwater Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. One Side Transparent For Inspection 60Mm. , Non-Fibre Optic Single Use Large Scope Channel Width :2.8Mm Insertion Tube Diameter:5.8 Mm. Working Length:600 Mm Bending Range :180 Degree Up & 160 Degree Down Field Of View:85 Degree Or More Direction Of View :0 Degree (Forward View) Depth Of Field :8 -50 Mm Or Better Minimum Ett Inner Dia:7 Mm Illumination Method :Led Complete System Should Be Us-Fda And European Ce Certified. , Antimicrobial Silver Dresssing (Sizes:10X12cm,) Sterilenon-Occulusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles( Cmc) ,Petroleum Jelly, Polymers And Silver Salts With Demonstrated In Vitro Antibacterial Activity Upto 7 Days, Using Patented Lipido- Colloid Technology (Tlc) , Antimicrobial Silver Dresssing (Sizes:15 X 20Cm,) Sterilenon-Occulusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles( Cmc) ,Petroleum Jelly, Polymers And Silver Salts With Demonstrated In Vitro Antibacterial Activity Upto 7 Days, Using Patented Lipido- Colloid Technology (Tlc) , Non-Fibre Optic Single Use Cysto Scope For Djr & Diagnosticcystoscope It Should Be Capable Of Easy Navigation And Fast Identification Of Anatomical Landmarks The Scopes Should Be Sterile Packed One Cmos Camera And Two Led Light Source Should Be Integrated At The Distal End Minimum Length Of The Scope Should Be 380 - 400Mm Working Channel Should Be Of 6.5 - 6.6 Fr The Control Lever On Handle For The Movement Of Distal Tip Up & Down In A Single Plane With 210 Degree Up And 120 Degree Down , Non-Fibre Optic Single Use Paediatrics Scope Channel Width :1.2Mm Insertion Tube Diameter:3.8 Mm. Working Length :600 Mm Bending Range:180 Degree Up & 180 Degree Down Field Of View :85 Degree Or More Direction Of View:0 Degree (Forward View) Depth Of Field:8 -50 Mm Or Better Minimum Ett Inner Dia :5 Mm Illumination Method :Led Complete System Should Be Us-Fda And European Ce Certified. , Sterile Self Adherent With Lipido Colloid Technology (8X8cm)Sterile Self -Adherentpatented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer ,A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. , Sterile Self Adherent With Lipido Colloid Technology(13X13cm) Sterile Self -Adherentpatented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer ,A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. , Sterile Self Adherent With Lipido Colloid Technology (15X20cm)Sterile Self -Adherentpatented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer ,A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. , Sterile Self Adherent With Lipido Colloid Technology (20X20cm,)Sterile Self -Adherentpatented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer ,A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. , Sterile Self Adherent With Lipido Colloid Technology(6.5X10cm)Sterile Self -Adherentpatented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer ,A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. , Sterile Self Adherent With Lipido Colloid Technology(8X15cm) Sterile Self -Adherentpatented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer ,A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. , Sterile Self Adherent With Lipido Colloid Technology(10X25cm) Sterile Self -Adherentpatented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer ,A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. , 100% Polysiloxane Based Scar Management In Gel Form Pure Poly Siloxane Based Silicone Scar Management Product In Sheet Form(We Also Should Mention About The 100% Poly Siloxane And Nylon Polyamide Mesh) , Triple Hydrocolloid Skin Barrier (45Mm) Where No Cutting Is Required Comprised Of Pectin, Gelatin And Sodium Carboxy Methyl Cellulose,Elastomeric Polymers Extending Turtlenecking Effect And Rebounding Memory Technology With Audible Click And Flexible Tape Collar. , Triple Hydrocolloid Skin Barrier (57Mm) Where No Cutting Is Required Comprised Of Pectin, Gelatin And Sodium Carboxy Methyl Cellulose,Elastomeric Polymers Extending Turtlenecking Effect And Rebounding Memory Technology With Audible Click And Flexible Tape Collar. , Triple Hydrocolloid Skin Barrier (70Mm) Where No Cutting Is Required Comprised Of Pectin, Gelatin And Sodium Carboxy Methyl Cellulose,Elastomeric Polymers Extending Turtlenecking Effect And Rebounding Memory Technology With Audible Click And Flexible Tape Collar. , Drainable Pouch 12, With Filter Embeded & 2 Sided Hydrophobic Comfort Panel Standard, Opaque With Integrated Dotted Velcro Tail Closure 45 Mm. , Drainable Pouch 12, With Filter Embeded & 2 Sided Hydrophobic Comfort Panel Standard, Opaque With Integrated Dotted Velcro Tail Closure 57 Mm. , Drainable Pouch 12, With Filter Embeded & 2 Sided Hydrophobic Comfort Panel Standard, Opaque With Integrated Dotted Velcro Tail Closure 70Mm. , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge (8Mm) , Inbuilt Knife ,Size 60Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purplecolour Code, Usfda Approved , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge (10Mm ), Inbuilt Knife ,Size 60Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purplecolour Code, Usfda Approved , Titanium Total Ossocular Replacement Prosthesis (Torp) , Titanium Partial Ossocular Replacement Prosthesis (Porp) , Pistontitanium (0.4Mm ) Diameter,4.25 Mm Length , Pistontitanium (0.4Mm ) Diameter,4.5 Mm Length , Pistontitanium (0.4Mm) Diameter, 4.75 Mm Length , Pistontitanium (0.4Mm ) Diameter, 5 Mm Length , Pistontitanium (0.6Mm) Diameter,4.25 Mm Length , Pistontitanium (0.6Mm) Diameter, 4.5 Mm Length , Pistontitanium (0.6Mm) Diameter,4.75 Mm Length , Pistontitanium (0.6Mm) Diameter, 5 Mm Length , Piston Titanium - Teflon Mix (0.4Mm )Diameter, 4.25 Mm Length , Piston Titanium - Teflon Mix (0.4Mm )Diameter, 4.5 Mm Length , Piston Titanium - Teflon Mix (0.4Mm )Diameter, 4.75 Mm Length , Piston Titanium - Teflon Mix (0.4Mm )Diameter, 5 Mm Length , Piston Titanium - Teflon Mix (0.6Mm)Diameter, 4.25 Mm Length , Piston Titanium - Teflon Mix (0.6Mm)Diameter, 4.5 Mm Length , Piston Titanium - Teflon Mix (0.6Mm)Diameter, 4.75 Mm Length , Piston Titanium - Teflon Mix (0.6Mm)Diameter, 5 Mm Length , Piston Teflon (Ptfe) (0.4Mm ) Diameter, 4.25 Mm Length , Piston Teflon (Ptfe) (0.4Mm ) Diameter, 4.5 Mm Length , Piston Teflon (Ptfe) (0.4Mm) Diameter, 4.75 Mm Length , Piston Teflon (Ptfe) (0.4Mm ) Diameter, 5 Mm Length , Piston Teflon (Ptfe) (0.6Mm) Diameter, 4.25 Mm Length , Piston Teflon (Ptfe) (0.6Mm) Diameter, 4.5 Mm Length , Piston Teflon (Ptfe) (0.6Mm) Diameter, 4.75 Mm Length , Piston Teflon (Ptfe) (0.6Mm) Diameter, 5 Mm Length , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting 0.5 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting 0.6 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting /0.8 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting 1.6 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting 2.3 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting 2.8 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting 3 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting 3.5 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting 4 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Cutting 5 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond 0.5 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond 0.6 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond /0.8 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond 1.6 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond 2.3 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond 2.8 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond 3 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond 3.5 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond 4 Mm , Burr Tips (Tungeston Carbide Material) Round Tip (70 Mm Length) - Diamond 5 Mm , Burr Tips (Tungeston Carbide Material) Round Tip - Fissure Burr 70 Mm To 95 Mm Length 1 Mm , Burr Tips (Tungeston Carbide Material) Round Tip - Fissure Burr 70 Mm To 95 Mm Length 3, Mm , Burr Tips (Tungeston Carbide Material) Round Tip - Fissure Burr 70 Mm To 95 Mm Length 5 Mm , Sialestic Sheet 55*75 Mm And Thickness 0.5 Mm , Ear Pack/Wick (12*24 Mm Length) , T-Tube (Silicone) 9 Mm Length , Nasal Haemostatic Sponge Pack With Out Airway 8 Inch , Nasal Haemostatic Sponge Pack With Out Airway 10 Inch , Nasal Haemostatic Sponge Pack (With Airway)8 Inch , Tracheostomy Tube (Pvc Material)Double Lumen 3.5 -8Mm All Size , Tracheostomy Tube (Pvc Material) Fenestrated 3.5 -8Mm All Size , Femoral Sheath Including Pott’S Needle, J Tipped Wire, Dilator And Sheath All Sizes 5 Fr , Femoral Sheath Including Pott’S Needle, J Tipped Wire, Dilator And Sheath All Sizes 6 Fr , Femoral Sheath Including Pott’S Needle, J Tipped Wire, Dilator And Sheath All Sizes 7 Fr , Femoral Sheath Including Pott’S Needle, J Tipped Wire, Dilator And Sheath All Sizes 8 Fr , Femoral Sheath Including Pott’S Needle, J Tipped Wire, Dilator And Sheath All Sizes 9 Fr , Diagnostic Catheter Ar 1 Aka Amplatz Right 5 Fr , Diagnostic Catheter Ar 1 Aka Amplatz Right 6 Fr , Diagnostic Catheter Vert Angled Tip 125Cm 5 Fr , Diagnostic Catheter Sim 1 Aka Simmon’S 4 Fr , Diagnostic Catheter Sim 1 Aka Simmon’S 5Fr , Diagnostic Catheter Sim 2 Aka Simmon 5Fr , Diagnostic Catheter Sim 3 Aka Simmon 5Fr , Diagnostic Catheter H 1 Aka Headhunter 4Fr , Diagnostic Catheter Pigtail 5Fr , Guide Wire Hydrophilic Coated Angled Tip Soft Regular Standard 150-250Cm , Guide Wire Hydrophilic Coated Angled Tip Extra Stiff 150-250 Cm , Guiding Catheter Braided Guiding Catheter In Various Shapes 5 , Guiding Catheter Braided Guiding Catheter In Various Shapes 6 , Guiding Catheter Braided Guiding Catheter In Various Shapes 7 , Guiding Catheter Braided Guiding Catheter In Various Shapes 8 , Guiding Catheter Braided Guiding Catheter In Various Shapes 9 , Guiding Catheter Braided Guiding Catheter In Various Shapes 10 , Guiding Catheter Balloon Tipped Guiding Catheter Size 8 , Distal Access Catheter 5 , Distal Access Catheter 6 , Intracranial Support Catheter With Flat Soft Distal Segment 5 , Intracranial Support Catheter With Flat Soft Distal Segment 6 , Flexometlic Tube 3-8.5 With Stylet Reinforce Et Tube With Wiring From Tip To Endit Should Be Approved By *Us Fda , Act Tubesus Fda + Ce/ Dgci Approved· Disposable Act Tubes Compatible With Existing Medtronic Machines At Smsh· Should Meet Highest Medical Industrial Standards· Quality Certification Should Be Provided From Authorized Agencies. , High – Presure Injector Lines Us Fda + Ce/ Dgci Approved·Should Be Available In Various Lengths(100 Cm) Should Have Male And Female Luer Locks· Should Be Transparent And Kink Resistant· Should Be Able To Take High Pressure Of Angiographic Injections , High – Presure Injector Lines Us Fda + Ce/ Dgci Approved·Should Be Available In Various Lengths (150 Cm) Should Have Male And Female Luer Locks· Should Be Transparent And Kink Resistant· Should Be Able To Take High Pressure Of Angiographic Injections , High – Presure Injector Lines Us Fda + Ce/ Dgci Approved· Should Be Available In Various Lengths (200Cm) Should Have Male And Female Luer Locks· Should Be Transparent And Kink Resistant· Should Be Able To Take High Pressure Of Angiographic Injections , Disposable Transducers For Invasive Pressure Monitoring Compatible With Available System In Cath Lab In Smshus Fda + Ce/ Dgci Approved· Disposable Transducers For Invasive Pressure Monitoring· Should Be Compatible With Available System In Cath Lab (Iabp – Data Scope & Cath Lab Transducer) And Iccu At Smsh· Should Meet Highest Medical Industrial Standards· Quality Certification Should Be Provided Form Authorized Agencies , Renal Double Curve Catheter Us Fda + Ce/ Dgci Approved· , Simmons/ Sidewinder Catheter Us Fda + Ce/ Dgci Approved· , Vertebral Catheter , Coeliac Axis Catheter Us Fda + Ce/ Dgci Approved· , Shepherd’S Hook Catheter Us Fda + Ce/ Dgci Approved· , Vtk Diagnostic Catheter Us Fda + Ce/ Dgci Approved· , Angiographic Sizing Pigtail Catheter 5Fr Us Fda + Ce/ Dgci Approved , Angiographic Sizing Pigtail Catheter 6Fr Us Fda + Ce/ Dgci Approved , Angiographic Sizing Pigtail Catheter 7Fr Us Fda + Ce/ Dgci Approved , Balloon Inflation Catheter For Brtousa/Fda/Ce Approved 9/10 F 0.035 Compatible ,Length100/120 Cm ,Max Volume 30/40 Cc , Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Pediatric Dialyzer (Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Pediatric Dialyzer(Dialyzer Should Be Synthetic Membran(Poly Sulfon/Poly Ethresulfon) , Multirate Elastomeric Disposable Infusion Pump With Air Vent Blue End Cap For Air Bubble Removal And With Two Micro Iv Filters In 100 Ml & 275 Ml With Flow Rate From 1-7/Hr And 2- 14Ml/Hr , Single Rateelastomeric Disposable Infusion Pump With Air Vent Blue End Cap For Air Bubble Removal And With Two Micro Iv Filters In 100 Ml & 275 Ml With Flow Rate Of 2,5,8,10Ml/Hr , Pct Kit With Griggs Forceps And With Subglotic Suction Line Tracheostomy Tube With Usfda/European Ce , Pct Kit Without Griggs Forceps And With Subglotic Suction Line Tracheostomy Tube With Usfda/European Ce , Double Lumen Closed Suction Set For Et And Tt , With Mdi Adopter , Trach Wedge , Swiel Connector And With Reservoir , Et Tube With Yellow Subglotic Suction Line With Inverted And Soft Seal Cuff. With Usfda/European Ce , Tt Tube With Yellow Sub Glotic Suction Line With Inverted And Soft Seal Cuff. With Usfda/European Ce , Catheter Stabilization Device Sterile Latex Free Sutureless With Sliding Post , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm, 5 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm, 10 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm, 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm, 20 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm, 5 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm, 10 Hple , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm, 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm, 20 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm, 5 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm, 10 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm, 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm, 20 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm C Plate, 5 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm C Plate, 10 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm C Plate, 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 1.5 Mm C Plate, 20 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm L Plate Right And Left Side, 5 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm L Plate Right And Left Side, 10 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.5 Mm L Plate Right And Left Side, 15 Hole , Titanium Maxillofacial Fracture Fixation Miniplate 2.0 Mm L Plate Right And Left Side, 6 Hole , Titanium Maxillofacial Fracture Fixation Screws 1.5 Mm, 6 Hole , Titanium Maxillofacial Fracture Fixation Screws 2.0 Mm, 6 Mm , Titanium Maxillofacial Fracture Fixation Screws 2.0 Mm, 8 Mm , Titanium Maxillofacial Fracture Fixation Screws 2.5 Mm, 6Mm , Titanium Maxillofacial Fracture Fixation Screws 2.5 Mm, 8Mm , Titanium Maxillofacial Fracture Fixation Screws 2.5 Mm, 10Mm , Braided E Caprolactone Coated Lactomer 1, 90Cm Gs-25,37-40Mm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 2-0 90Cm Gs-25,3Omm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 1 90Cm Gs-25,37-40Mm1/2 Circle Reverse Cutting , Braided E-Caprolactone Coated Lactomer 1, 90Cm Gs-24 , Violet40mm1/2 Circletaper Point , Braided E-Caprolactone Coated Lactomer 3-0 75Cm C-14 , Undyed24mm3/8 Circlereverse Cutting , Braided E-Caprolactone Coated Lactomer 2-0 90Cm Gs-21 , Undyed30mm1/2 Circletaper Point , Braided E-Caprolactone Coated Lactomer 1 90Cm Gs-25 , Undyed37-40Mm1/2 Circlereverse Cutting , Braided E-Caprolactone Coated Lactomer 0 90Cm Gs-24 , Violet40mm1/2 Circletaper Point , Braided E-Caprolactone Coated Lactomer 3-0 75Cm Cv-25 , Violet20-22Mm1/2 Circletaper Point , Braided E-Caprolactone Coated Lactomer 1-0 90Cm Gs-25 , Undyed37-40Mm1/2 Circlereverse Cutting , Polyglactin 910 Violet Braided, 1, 35 Cm 1/2 Circle Reverse Cutting (Heavy) 23 Mm , Polyglactin 5-0 Rb Oval ½ Circle 16 Mm45 Cm , Polyglactin 5-0 Cc 3/8 Circle 16 Mm 45 Cm , Polyglactin 6-0 Micro Point ¼ Circle 8 Mm 45 Cm , Polyglactin-910, Braided Coated Withantibacterial 2/0, 70 Cm Undyed With ½ Circle 25 Mm Rb , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydiaxanone Violet 1/2 Circle Round Bodied 30 Mm Needle, Length 70Cmsize 3-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydiaxanone Violet 1/2 Circle Round Bodied 30 Mm Needle, Length 70Cmsize 4-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydiaxanone Violet 1/2 Circle Round Bodied 30 Mm Needle, Length 70Cmsize 5-0 , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Needled Suture Loopmonofilament Polydiaxanone Violet No 1 40Mm1/2 Circle Reverse Cutting Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Needled Suturemonofilament Polydiaxanone Violet 2-0 Rb 30 Mm Needle Length 75 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armedneedled Suturemonofilament Polydiaxanone Violet 6-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armedneedled Suturemonofilament Polydiaxanone Violet 6-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armedneedled Suturemonofilament Polydiaxanone Violet 5-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Singlearmedneedled Suturemonofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm , Monofilament Polyglyconate 1 150Cm Gs-25 Loop, Green48mm1/2 Circletaper Point , Monofilament Polyglyconate 2-0, 75Cm Green26-30Mm1/2 Circletaper Point , Monofilament Polyglyconate 3-0, 75Cm Green20-26Mm1/2 Circletaper Point , Monofilament Polyglyconate 4-0, 75Cm Green17-20Mm1/2 Circletaper Point , Polydioxanone Voilet Monofilament, 3-0, 70 Cm, 1/2 Circle Taper Point Rb-1, 17Mm, , Polydioxanone Voilet Monofilament, 4-0, 70 Cm, 1/2 Circle Taper Point Rb-1, 17Mm, , Polydioxanone Monofilament (Voilet), 5-0, 70 Cm 1/2 Circle Round Body Double Needle 13 Mm , Monofilament Glycomer 1, 90Cm Gs-21 , Volet37mm1/2 Crcletaper Pont , Monofilament Glycomer 2-0 90Cm Gs-21 , Volet37mm1/2 Crcletaper Pont , Non Absorbable Surgical Suture, Sterilized Surical Needledblack Braided Silk With Needle 1/2 Circle Round Bodied 30 Mm Needle , Length 70 Cm Size 2-0 , Silk Reel 1-0 , Silk Reel 2-0 , Silk Reel 3-0 , Silk Reel 4-0 , Braided Polyester Caoted With Silicon 2-0 8X75cm 2Xy-31 Plgt , Blue & White16mm1/2 Circletapercutting Oval Pledget , Braided Polyester Caoted With Silicon 2-0 10X75 2Xcv-305 Pgt , Blue & White25mm1/2 Circletaper Point Oval Pledget , Braided Polyester Caoted With Polybutylate 2-0 8X75cm 2X Plgt , Blue & White16mm1/2 Circletapercutting Oval Pledget , Braided Polyester Caoted With Polybutylate 2-0 10X752x Plgt, Blue & White25mm1/2 Circletaper Point Oval Pledget , Braided Polyester Caoted With Silicon 2,26Mm1/2 Circlerc 75Cm , Braided Polyester Caoted With Silicon 5,55Mm1/2 Circlerc 75Cm , Braided Polyester Caoted With Polybutylate 2,26Mm1/2 Circlerc 75Cm , Braided Polyester Caoted With Polybutylate 5,55Mm1/2 Circlerc 75Cm , Monofilament Polypropylene With Peg Additive 3-0 90Cm 2Xvf-20 , Blue26mm1/2 Circletaper Point , Monofilament Polypropylene With Peg Additive 2-0 90Cm 2Xv-20 , Blue30mm1/2 Circletaper Point , Monofilament Polypropylene With Peg Additive 4-0 90Cm 2Xcv-23 , Blue17mm1/2 Crcletaper Cut , Monofilament Polypropylene With Peg Additive 5-0 90Cm 2Xcv-23 , Blue17mm1/2 Crcletaper Pont , Monofilament Polypropylene With Peg Additive 6-0 75Cm 2Xcv-22 , Blue13mm1/2 Crcletaper Pont , Monofilament Polypropylene With Peg Additive 7-0 60Cm 2Xkv-1 , Blue9mm3/8 Crcletapercuttng , Polypropylene Blue Monofilament, 2-0, 90 Cm 1/2 Circle Round Body Double Needle 26 Mm , Polypropylene Blue Monofilament, 3-0, 90Cm 1/2 Circle Round Body Double Needle 26 Mm , Polypropylene Blue Monofilament, 4-0, 75Cm 1/2 Circle Round Body Double Needle 17 Mm , Polypropylene Blue Monofilament, 5-0, 90Cm 1/2 Circle Round Body Double Needle 17 Mm , Polypropylene Blue Monofilament, 6-0, 75 Cm 3/8 Circle Round Body(380 Microns) Double Needle 13 Mm , Polypropylene Blue Monofilament,No. 7-0, 60 Cm 3/8 Circle Round Body, Taper Pointdouble Needle 9 Mm , Monofilament Polybuetester Coated With Polytribiolate 6-0 75Cm 2Xcv-1X36 , Blue9mm3/8 Circletaper Point , Monofilament Polybuetester Coated With Polytribiolate 4-0 90Cm 2Xcv-23X36 , Blue17mm1/2 Circletaper Point , Monofilament Polybuetester Coated With Polytribiolate 7-0 60Cm 2Xmv-175-8 , Blue8mm3/8 Circletaper Point , Monofilament Polybuetester Coated With Polytribiolate 2-0 90Cm 2Xv-20X36 , Blue26mm1/2 Circletaper Point , Monofilament Polybuetester Coated With Polytribiolate 3-0 90Cm 2Xv-20X36 , Blue26mm1/2 Circletaper Point , Non-Absorbable Synthetic Unidrectional Dual Cut Angle Barb With Welded Loop End Made Up With Polybeutester Size 1, 37Mm, 30Cm, 1/2 Circle, Tp , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Polybeutester Blue Size 2-0, 1/2 Circle, 37Mm, 30Cm Tp, , Absorbable Synthetic Unidirectional Dual Cut Angle Barbed With Welded Loop End Made Up With Polyglyconate 2-026-30 Mm 30 Cm 1/2 Circle Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Polyglyconate Green Size 1-0, 1/2 Circle, 37Mm, 30Cm Tp , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Polyglyconate Green Size 2-0, 1/2 Circle, 26Mm, 30Cm Tp , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Polyglyconate Green Size 3-0, 1/2 Circle, 26Mm, 30Cm Tp , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Glycomer Blue Size 2-0, 1/2 Circle, 24Mm, 30-45Cm Rc , Laproscopic Knotless Pga -Pcl Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Unidirectional Taper Point 26 Mm & 20 Cm Size 2-0 , Polyester Ethylene Terephthalatenonabsorbablesurgical Suture Polyester Suture Is A Nonabsorbable, Braided, Sterile, Surgical Suture Composed Of Poly (Ethylene Terephthalate.) It Is Prepared From Fibers Of High Molecular Weight, Long-Chain, Linear Polyesters 1 /2 Circle Tapercut 2 X V-5 Double Needle 26 Mm 90 Cm Green Color Size 2-0 , Laproscopic Knotless Pga -Pcl Bidirectional Taper Point Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Bidirectional Taper Point 17 Mm & 32Cm , Absorbable Antibacterialpolydiaxonone Monofilamenttaper Point Surgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Voilet Monofilament 1/2 Circle Taper Point Ct-1 40 Mm Needle 90 Cm Suture Size 1 , Absorbable Antibacterialpolydiaxonone Monofilament Taper Pointsurgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Voilet Monofilament 1/2 Circle Taper Point Loop Ct Sgle Armed 65 Mm Needle 122 Cmsuture Size 1 , Laproscopic Knotless Polydiaxonone With Fixation Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Polydiaxonone With Fixation Tab Reverse Cutting 36 Mm & 45 Cm Suture Size 1 , Laproscopic Knotless Polydiaxonone With Fixation Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Polydiaxonone With Fixation Tab Taper Point 36 Mm & 45 Cm Suture Size 1-0 , Non-Absorbable Surgical Suture Black Braided Silk1-0 Rb ½ Circle 30 Mm 90 Cm , Non-Absorbable Surgical Suture Black Braided Silk1-0 Rc 3/8 Circle 45 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 5-0 Rc 3/8 Circle 12 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk5-0 Rb 3/8 Circle 16 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 6-0 Rc Mp 3/8 Circle 8 Mm , Non Absorbable Monofilament3-0 Reverse Cutting 24Mm Needle , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 2-0 Rb ½ Circle 30 Mm 70 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet6-0 Rb Micro Point ¼ Circle 8 Mm 45 Cm 2670 , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 4-0 Cc 3/8 Circle 16 Mm 45 Cm 2442 , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 3-0 Cc 3/8 Circle 16 Mm 45 Cm 2442 , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 6-0 Rc Micro Point ¼ Circle 8 Mm 45 Cm 2670 , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 5-0 Cc 3/8 Circle 16 Mm 45 Cm 2442 , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 5-0 Rb Oval 1/2 Circle 16 Mm 45 Cm , Endoloop Ligature Made With Polyglactin Suture Length18 Inch, Narrow At One End And Scored At Other , Non Absorbale Surgical Suturesterlised Surgical Needle Suturepolyamide Mono Filament Black (Nylon)(3/8 Cir Micropoint Royund Body 6Mm Length 38 Cm)9-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suturepolyamide Mono Filament Black (Nylon)(3/8 Cir Micropoint Royund Body 6Mm Length 38 Cm)10-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suturepolyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 6Mm Length 70Cm3-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suturepolyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 6Mm Length 70Cm4-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suturepolyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 6Mm Length 70Cm 5-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suture Monofilament Polypropylene Blue 1/2 Circle Round Body 13 Mm Needle Length 75 Cm6-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suture Monofilament Polypropylene Blue 1/2 Circle Round Body 13 Mm Needle Length 75 Cm7-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suture Polyglycaprone/ Polyglyconate Monofilament Sutures 1/2 Circle Oval Round Body Needle 26Mm Needle Length 70 Cm3-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suture Polyglycaprone/ Polyglyconate Monofilament Sutures 1/2 Circle Oval Round Body Needle 26Mm Needle Length 70 Cm4-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suture Polyglycaprone/ Polyglyconate Monofilament Sutures 1/2 Circle Oval Round Body Needle 26Mm Needle Length 70 Cm 5-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suture (Braided , Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40 Mm Gs Needle Suture Length 90 Cm 3-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suture (Braided , Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40 Mm Gs Needle Suture Length 90 Cm 4-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suture (Braided , Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40 Mm Gs Needle Suture Length 90 Cm 5-0 , Non Absorbale Surgical Suturesterlised Surgical Needle Suture (Braided , Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40 Mm Gs Needle Suture Length 90 Cm 6-0
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Rajasthan View Result →
23.
Environment and Forests #10074658 Price Bid
Supply , Installation And Commissioning Of Various Scientific Instruments / Equipments In Cpcb- 1 Digital Burette 2 Portable Combustion / Flue Gas Analyzer For O2, Co And With Data Recorder 3 Portable Toc / Hc Analyzer 4 Cod Analyzer ( Closed Reflux ) 5 Laboratory Glassware Washer & Dryer 6 Ion Chromatograph 7 Rotatory Evaporator With Vacuum Pump & Chiller 8 Water Purification System 9 Gas Chromatograph –High Resolution Mass Spectrometer ( Gc-Hrms ) 10 Gas Chromatograph -Ecd Fpo 11 Ultra High Perfomance Liquid Chromatograph ( Uhpld ) With Dad / Pda 12 Portable Ndir / Nduv And Chemiluminscence Analyzer With Sampling Probe Conditioning System 13 Gc-Ms-Atd 14 Ph Meter ( Bench Top ) Display Upto 3 Decimal Place 15 Multi Channel Aerosol Speciation Sampler 16 Low Flow Pump 17 Aerosol Monitor For Indoor Air Quality Measurement 18 Indoor Air Quality Measuring Instrument 19 Mass Flow Controllers With Control Unit ( 08 ) 20 Co / Hc Analyzer 21 Smoke Meter 22 Dispensers Of Different Range 23 Puf Sampler 24 Spe Unit With Accessories 25 Recirculating Chillers 26 Icp-Ms 27 Gc-Ms-Ecd 28 Digital Microscope Dslr Mounted 29 Tclp Extraction System 30 Handheld Geiger Counter 31 Gas Chromatograph ( Fid-Ecd ) 32 Atomic Absorption Spectrophotometer ( Aas ) - Gta / Vga 33 Compact Weather Station ( Portable Meteorology Station ) 34 Prefilled And Preconditioned Thermal Desorption Tubes For Voc 35 Sampling Assembly For Carbonyls Consisting Of Following Pump :- Pump Battery Charger, Twin Port Sampler, Cartridge Adaptor, Male Fitting, Female Fitting, Male Coupler, Female Coupler, Clips, Male Luer Plugs, Female Luer Plugs And Flow Calibrator ( 1-6000 Ml Per Minute ) With Charger 36 Portable Flow Meter 37 Mercury Analyzer 38 Toc Analyzer 39 Turbidity Meter 40 High Volume Sampler 41 Digital Thermo-Hygrometer 42 Platinum Crucible, 3 Ml 43 Cod Digestion System ( 30 Sample Position ) 44 Moisture Analyzer 45 Heating Assembly For Soxhlet Extraction 46 Vaccum Filtration Assembly 47 Laminar Flow System 48 Isokinetic Stack Sampling Assembly With Heated Prob ( Stack Monitoring Kit Suitable For Epa Method 5, 17, 23A, 29 Etc ) 49 Handheld Gps Receiver 50 Digital Barometer
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 35
Delhi View Result →
24.
Road Transport and Highways #9986733 AOC
Bids Are Invited For 1 Weigh Balances Electronic type 5-20 kg capacity accuracy 1 gm 2 Weigh Balances Electric type 500 capacity accuracy 0 point 01 gm 3 Weigh Balances Electronic 5 kg capacity accuracy 0 point 5 gm 4 Big Size Oven Electrically operated thermostatically controlled 5 Sieves 450 mm internal Dia of sieve sets as per BIS 6 Sieves 200 mm internal Dia consisting of sieve set of required sieve sizes 7 Sieve shaker capable of shaking 200 mm and 450 mm Dia sieves 8 Stop watches 1/5 sec accuracy 9 Comprising beakers (Capacity 1000 ml) (Glassware) 10 Pipettes (Capacity 50 ml) (Glassware) 11 Dishes (100 mm Dia) (Glassware) 12 Glass Measuring cylinders 200ml capacity 13 Glass Measuring cylinders 500ml capacity 14 Glass Measuring cylinders 1000ml capacity 15 Glass rods and funnels (200 mm & 200ml) 16 Glass thermometers range 0 C to 100 C (100 C) 17 Metallic thermometers range up to 300C (300C) 18 Hot plates 200 mm Dia (1500 watt) voltage 220v to 230v 19 Enamel Tray 600 mm x 450 mm x 50 mm 20 Enamel Tray 450 mm x 300 mm x 40 mm 21 Enamel Tray 300 mm x 250 mm x 40 mm 22 Enamel Tray 150mm x 150mm x 30 mm 23 Enamel Tray 200mm x 200mm x 30 mm 24 Enamel Tray 350mm x 300mm x 40mm 25 Circular plates of 250 mm Dia 26 Water Testing Kit 27 Density Hydrometer 700-750 gm/ml Capacity 28 Density Hydrometer 750-800 gm/ml Capacity 29 Density Hydrometer 800-850 gm/ml Capacity 30 Digital Vernier Calipers (accuracy 0 point 001 mm) 31 Standard pycnometer of 50 ml Capacity for Specific gravity 32 Sampling pipettes fitted with pressure and suction inlets 10 ml Capacity 33 Sampling tins with lids 100 mm Dia x 75 mm ht (Steel) 34 Unconfined Compression Test apparatus IS2720 Part 10 35 Rapid Moisture meter IS12175 1987 36 Direct shear strength Apparatus IS2720 PART 13 37 Constant temperature bath for accommodating bitumen test (Big Size) 38 Bitumen laboratory mixer including required accessories (20 ltrs) 39 Furol viscometer 40 Refrigerated ductility testing machine with processor based temperature 41 Distant reading thermometer 42 Automatic Asphalt content meter 43 Sand Equivalent test apparatus 44 Bitumen Digital Thermometers laser point gun 0 C to 300 C 45 Flash and Fire point apparatus 46 Water Still ( 20 ltr capacity) 47 150 mm x 300 mm ht Cylinder Moulds with caping component 48 High frequency mortar cube vibrator for cement testing 49 Concrete Mixer power driven Drum size-Dia 600 mm x 350 mm depth 50 Variable frequency and amplitude vibrating table size 1 m x 1 m 51 Los- Angeles abrasion test apparatus as per IS2386 (Part-4) 1963 52 Needle vibrator length 3m and 35mm Dia type pistol grip drill 53 0 point 5 Cft & cylinder for checking bulk density of aggregate with tamping rod 54 1 Cft & cylinder for checking bulk density of aggregate with tamping rod 55 Rebound concrete test hammer 56 Concrete thickness gauge 57 Ultrasonic pulse velocity tester 58 Electronic digital micrometer 59 Infrared type k thermometer 60 IS Sieve 50 mm 31 point 5mm 25mm 16mm 6 point 3mm each 3 nos 61 IS Sieve 450mic and 850 mic each 1 nos 62 Metal cylinder as per IS 2386 for Checking Bulk density (3 Ltr capacity) 63 Metal cylinder as per IS 2386 for Checking Bulk density (15 Ltr capacity) 64 Metal cylinder as per IS 2386 for Checking Bulk density (30 Ltr capacity) 65 Accelerated curing Tank having capacity to Accommodate 06/12/18 concrete cubes 66 Weight Machine 30 kg (Electronic Type) 67 Compressive Strength Testing Machine of 2000KN Capacity with additional Dial 68 Water Bath 69 Ring and Ball Apparatus 70 Ductility Apparatus 71 Casagrande Apparatus (Liquid Limit Device with ASTM Groving Tools) 72 Benzene 73 IS Sieves Brass 4 point 75 mm 2 point 36mm 1 point 18mm each 1 nos 74 IS Sieves Brass 600mic 425mic 180mic 90mic each 1 nos 75 IS Sieves Brass 150mic 75mic each 4 nos 76 Bitumen Extractor Electrically Operated 77 Weighing Machine 0 kg to 10 kgs 78 Weighing Machine 0 kg to 25 kgs 79 Atterberg apparatus 80 Oven Laboratory 81 CBR apparatus 82 G.I. Sieve 450mm Dia- 63 mm 50mm 25mm 20mm 16mm 12mm10mm 6 point 3mm each 3 nos 83 Brass Sieve 200 mm Dia- 13 point 2mm 11 point 2mm 9mm 4 point 75mm 2 point 36mm 1 point 18mm each 3 nos 84 Brass Sieve 200 mm Dia- 600mic 300mic 85 A/V Testing Apparatus complete set 86 Filter for binder content 87 Flakiness Apparatus 88 Elongation Apparatus 89 Density Testing Machine Complete Set (Bucket Method) 90 Marshal Stability Testing Machine Complete Set 91 Electric Water Baath Tub 92 Electric Oven with Maximum temperature 360C 93 Hammering rod 2ft long 94 Proctor mould with complete set (1000 cc) 95 Field density apparatus complete set (Sand replacement Method) 96 Lazer thermometer Gun 97 Mould (7 point 06cmx7point 06cmx7point 06cm) for Cement Testing 98 Mould (15cmx15cmx15cm) for Compressive strength of concrete 99 Le-Chatelier Apparatus 100 Vicat Apparatus 101 Trowel 102 Vibrating Machine/Platform 103 Electronic Compressive Strength Testing Machine for Concrete 104 Slump cone apparatus complete set 105 Nikon Dual Axis Optical Electronic Total Station 106 Bitumen Core Machine Cutting Petrol Operated 107 Blane Air Permeability Apparatus 108 Liquid Limit Apparatus 109 Pre-painted PGI Sheet Corrugated 2500mm 110 Rain Gauge 111 Plum Bob 112 Gurmala Steel 9inch with Plastic Handle 113 Mason Trowel 4inch steel with Handle 114 Mason Trowel 5inch steel with Handle 115 Mason Trowel 6inch steel with Handle 116 Mason Trowel 8inch steel with Handle 117 Mason Trowel 9inch steel with Handle 118 Chisel Mason Size 1/2inchX6inch 119 Chisel Carpenter 1inch 120 Chisel Carpenter 8inch 121 Shovel round Nose 2 point 3 Kg 122 Shovel round Nose 2 point 5 Kg 123 Pick Axes Chisel 03 Kg 124 Spade With Handle 1 point 8 Kgs excluding weight 125 Crowbar Tempered 1650 mm 126 Tape Steel 05 Mtr 127 Tape Steel 30 Mtr 128 Tape Metallic 15 Mtr 129 Tape Metallic 30 Mtr 130 Axes Felling 02 Kg 131 Hacksaw Frame 12 Inch 132 Double Faced Sledge Hammer 02 Kg 133 Dah Iron 17 Inch With Handle 134 Bitumen Heating Thermometer 135 Spirit Level 12ft Steel Body 136 Cutting Plier 06inch 137 Glass Cutter Diamond 138 Pan Motor 18inch 139 Hammer stone dressing 01 Kg 140 Hammer stone dressing 02 Kg 141 Hammer stone dressing 1/2 Kg 142 Steel Wheel Barrows with Two Wheels cap 100 ltrs 143 Racker 12 Prong MS 12inch long with Wooden Handle 144 Multimeter Digital 8 Digits 500 Volt 145 Insulated Combination Plier 165mm 146 Chisel Carpenter 1/2inch 147 Chisel Carpenter 3/4inch 148 Chisel Carpenter 1-1/2inch 149 Chisel Carpenter 2inch 150 File Triangular 08inch 151 File Triangular 06inch 152 Hack Saw blade 12inchX1/2inch with one side cutter 153 Hack Saw blade 12inchX1inch with one side cutter 154 Screw Driver Set of 05 Pcs 155 Screw Driver 8inch flat/star 156 Electric Line Tester 157 Pincer Carpenter 8inch 158 Handsaw 20inch ISI Mark 159 Carpenter Vice 8inch SG Iron Body Unbreakable 160 Water Tullu Pump Motor 161 Nose Plier 6inch-165 mm length 162 Racker 8 Prong MS 12inch long with Wooden Handle 163 Soldering Iron 60 watt 164 Concrete beat 6mm 165 Concrete beat 8mm 166 Basula with handle 1 Kgs excluding handle weight 167 M S Sheet Cutter drop forged (Snip) 12inch 168 Carpentry Try Square 12inch 90 Degree Angle 169 Earth Rammer 14 LBS With handle of seasoned 170 Mason Thread 171 Spirit Level Wooden Body 18inch 172 Blade for Jack Plain 1/2inch 173 Light Duty Drill Machine 174 Mason Square 18inchX9inch 175 Mason Square 24inchX12inch 176 Double Faced Sledge Hammer 01 Kg 177 Double Faced Sledge Hammer 05 Kg 178 Edge Carpenter 179 Chisel Masson Size 02inchX06inch 180 Spirit Level 8inch Steel Body 181 Spirit Level 24inch Steel Body 182 Shovel Snow remover 183 Bosh GBH 220 Rotary Hammer Machine 184 Claw Hammer 185 Steel Bolt Cutter 24inch 186 Steel Bolt Cutter 12inch 187 Cable Cutter Heavy Duty 18inch 188 Electric Planer 650W 189 Blade for Electric Planer 650W 190 Blade for Iron Cutter 355mmX2 point 8X25 point 4mm 191 Wood Craving Chisel Set for Carpenter 192 Craft Sharpening stone Double Side 193 Mortise Chisel Set 08 Piece 194 Cobbler Pincer Steel 195 Tin Cutter 18inch 196 Iron Jack Planer 18inch 197 Wood Drill Bit for Carpenter Total Quantity : 2701
Contract Date: Ref. Documents Contract Value : ₹ 1.58 Crore
Government Departments No of Bidders 4
Sikkim View Result →
25.
Defence #9966685 AOC
Tender For Provision Of Otm Accommodation At Saugor Under Ge Saugor.; 2 GENERAL SUMMARY 3 Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule ‘A’Part-I (Ref prepriced schedule attached seperately) 4 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART- II (INTERNAL WATER SUPPLY WORKS) as listed in Schedule ‘A’Part- II (Ref prepriced schedule attached seperately) 5 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART-III (INTERNAL ELECTRIFICATION WORKS ) as listed in Schedule ‘A’Part -III (Ref prepriced schedule attached seperately) 6 Lump sum price worked out by the contractor forSCHEDULE ‘A’ PART-IV (EXTERNAL ELECTRIC SUPPLY WORKS) as listed in Schedule ‘A’ Part-IV (Ref prepriced schedule attached seperately) 7 Lump sum price worked out by the contractor forSCHEDULE A PART-V (SEWAGE DISPOSAL WORKS) as listed in Schedule ‘A’Part-V (Ref prepriced schedule attached seperately) 8 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART-VI(ROAD, PATH AND CULVERT WORKS) as listed in Schedule ‘A’Part-VI(Ref prepriced schedule attached seperately) 9 Lump sum price worked out by the contractor forSCHEDULE A PART-VII (AREA DRAINAGE WORKS) as listed in Schedule ‘A’Part-VII(Ref prepriced schedule attached seperately) 10 Lump sum price worked out by the contractor for SCHEDULE A PART- VIII (COMPOUND WALL, FENCING AND GATE WORKS) as listed in Schedule ‘A’Part-VIII(Ref prepriced schedule attached seperately) 11 Lump sum price worked out by the contractor forSCHEDULE A PART-IX (RETAINING WALL WORKS) as listed in Schedule ‘A’Part-IX(Ref prepriced schedule attached seperately) 12 Lump sum price worked out by the contractor forSCHEDULE ‘A’ PART-X (CONDUIT FOR TV & TELEPHONE WIRING WORKS)as listed in Schedule ‘A’Part-X(Ref prepriced schedule attached seperately) 13 Lump sum price worked out by the contractor forSCHEDULE ‘A’ PART-XI (SOLAR ROOF TOP SYSTEM WORKS) as listed in Schedule ‘A’Part-XI(Ref prepriced schedule attached seperately) 14 Lump sum price worked out by the contractor forSCHEDULE ‘A’ PART-XII (EXTERNAL WATER SUPPLY WORKS)as listed in Schedule ‘A’Part-XII(Ref prepriced schedule attached seperately) 15 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART – XIII (EXCAVATION, EARTH WORK & SITE CLEARANCE WORKS) as listed in Schedule ‘A’Part- XIII (Ref prepriced schedule attached seperately) 16 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART – XIV ( DEMOLITION / DISMANTLINGWORKS) as listed in Schedule ‘A’Part- XIV (Ref prepriced schedule attached seperately) 17 SCH A Pt - XV (MISCELLANEOUS ITEMS) 18 Ext Electric Supply NOTE:- For items of Ext Electric Supply notes given at the beginning of Sch ‘A’ Part-IV ( Ext Electric Supply) shall also be applicable. 19 M&L for supply, installation, connecting and commissioning ofCPRI approved main LT distribution ACB, outdoor type, both side openable including locking arrangement with sliding door bolt, cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15mm thick MS sheet with anti-corrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4 Nos insulated bus bar each made of high conductivity aluminium of size not less than 1.25 times of main incomer, prewired with suitable size of copper cable/insulated copper strip including PCC work and iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following.(A) INCOMING(i) ACB, 4 Pole, 415V, 50HZ 800 Amps with rupturing capacity 36 KA-01Nos(B) OUTGOING(i) Digital Multifuction meter withselector switch and three current transformers of suitable ratio and capacity -01 Set(ii) LED type Phase indicator lamps for three phases set of three - 01 set(iii) Bus bar chamber having insulatedaluminium, each suitable for 800 Amps for three phases and neutral -01 set(iv) MCCB, 4 Pole,415V, 50HZ 400 Amps with rupturing capacity 36 KA-02 Nos(v) MCCB, 4 Pole,415V, 50HZ 63 Amps with rupturing capacity 10 KA-01Nos(vi) 3 phase street light timer of capacity5 KW at 415V = 01 20 M&L for supply, installation, connecting and commissioning ofCPRI approved main LT distribution panel, outdoor type, both side openable including locking arrangement with sliding door bolt, cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anti-corrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4 Nos insulated bus bar each made of high conductivity aluminium of size not less than 1.25 times of main incomer, prewired with suitable size of copper cable/insulated copper strip including PCC work and iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following.(A) INCOMING(i) MCCB, 4 Pole, 415V, 50HZ 300 Amps with rupturing capacity 36 KA-01Nos (B) OUTGOING(i) Digital Multifuction meter withselector switch and three current transformers of suitable ratio and capacity -01 Set(ii) LED type Phase indicator lamps for three phases set of three - 01 set(iii) Bus bar chamber having insulatedAluminium for three phases and neutral -01 set(iv) MCCB, 4 Pole,415V, 50HZ 100 Amps with rupturing capacity 16 KA-02 Nos(v) MCCB, 4 Pole,415V, 50HZ 63 Amps with rupturing capacity 10 KA-04Nos 21 M&L for supply, installation, connecting and commissioning ofCPRI approved main LT distribution panel, outdoor type, both side openable including locking arrangement with sliding door bolt, cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15mm thick MS sheet with anti-corrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4 Nos insulated bus bar each made of high conductivity aluminium of size not less than 1.25 times of main incomer, prewired with suitable size of copper cable/insulated copper strip including PCC work and iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following.(A) INCOMING(i) MCCB, 4 Pole, 415V, 50HZ 400 Amps with rupturing capacity 36 KA-01Nos (B) OUTGOING(i) Digital Multifuction meter withselector switch and three current transformers of suitable ratio and capacity -01 Set(ii) LED type Phase indicator lamps for three phases set of three - 01 set(iii) Busbar chamber having insulatedAluminium busbar, each suitable for 400 Amps for three phases and neutral -01 set(iv) MCCB, 4 Pole,415V, 50HZ 160 Amps with rupturing capacity 25 KA-01 Nos(v) MCCB, 4 Pole,415V, 50HZ 40 Amps with rupturing capacity 10 KA-04Nos(vi) MCB SPN 240V, 50HZ 40 Amps,10KA -08Nos(vii) MCB SPN 240V, 50HZ 63 Amps 10KA -01Nos 22 M&L for supply, installation, connecting and commissioning ofCPRI approved main LT distribution panel, outdoor type, both side openable including locking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15mm thick MS sheet with anti-corrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4 Nos insulated bus bar each made of high conductivity aluminium of size not less than 1.25 times of main incomer, prewired with suitable size of copper cable/insulated copper strip including PCC work and iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following. (A) INCOMING(i) MCCB, 4 Pole, 415V, 50HZ 100 Amps with rupturing capacity 25 KA-01Nos (B) OUTGOING(i) Digital Multifuction meter withselector switch and three current transformers of suitable ratio and capacity -01 Set(ii) LED type Phase indicator lamps for three phases set of three - 01 set(iii) Busbar chamber having insulated aluminium busbar, each suitable for 100 Amps for three phases and neutral -01 set(iv) MCCB, 4 Pole,415V, 50HZ 63 Amps with rupturing capacity 36 KA-01 Nos(v) MCCB, 4 Pole,415V, 50HZ 40 Amps with rupturing capacity 10 KA- 03Nos(vi) MCB SPN 240V, 50HZ 32 Amps, 10KA-01Nos(vii) MCB SPN 240V, 50HZ 40 Amps,10KA-01Nos 23 Supply & fix junction box single pole and neutral enclosure compression gland 2 with connector and clamp for pole mounting with two nos of nut bolt and washers and socket complete of size not less than 12 x 10 x4 complete all as specified and directed.Make : Sintex/ Hensel 24 S&F tubes galvanised 40mm bore light grade ISI Marked bent to shape of bracket 1.2 mtr in length for mounting of street light fitting and fixed to pole with clamps and nut bolt and washer with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 25 Taking down old existing transformer and shifting into MES substation yard complete all as specified and directed. 26 SEWAGE DISPOSAL NOTE:- For items of Sewage Disposal notes given at the beginning of Sch ‘A’ Part-V ( Sewage Disposal) shall also be applicable. 27 S&F HDPE double wall corrugated sewagepipe 150mm internal bore SN-8 ISI Mark as per IS: 6908 Part II 2013 laid in trenches joined and tested as per manufacturers instructions complete all as specified and directed. 28 Construction of RCC septic tank designed to carry sewage and sludge water including excavation and earth work in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 150 users (CONVENTIONAL pattern) complete all as specified and directed. 29 Construction RCC septic tank designed to carry sewage and sludge water including excavation and earth work in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 users (CONVENTIONAL pattern) complete all as specified and directed. 30 Construction RCC septic tank designed to carry sewage and sludge water including excavation and earth work in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, base slab, baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users (CONVENTIONAL pattern) complete all as specified and directed. 31 Construction of soakage wells including excavation and earth work in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 Design Mix concrete including intercepting chamber and screen chamber made ofbrick masonry in CM, RCC cover slab in M25/SFRC cover, inter-connecting pipes of RCC/DWC complete filled with brick bats2.40m x 3.00m effective depth complete all as specified and shown on drawing No TD NoCEBZ/TD/78/2011. 32 COMPOUND WALL, FENCING AND GATE WORKS NOTE:- For items of COMPOUND WALL, FENCING AND GATE WORKS notes given at the beginning of Sch ‘A’ Part-VIII ( COMPOUND WALL, FENCING AND GATE WORKS) shall also be applicable. 33 Provision of steel gate 5.50m wide in double leaf, including RCC (M-25) pillars, excavation and earth work, formwork, reinforcement bars, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, three coats of white wash over plastered surfaces of pillars complete all specified and shown on Drg No CEBZ/STD/104 of 2011. 34 Provision of steel gate 8.00m wide in double leaf, including RCC (M-25) pillars, excavation and earth work, formwork, reinforcement bars, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, three coats of white wash over plastered surfaces of pillars complete all specified and shown on Drg No CEBZ/STD/104 of 2011. 35 (CONDUIT FOR TV & TELEPHONE WIRING WORKS)NOTE:- For items of CONDUIT FOR TV & TELEPHONE WIRING WORKS notes given at the beginning of Sch ‘A’ Part-X ( CONDUIT FOR TV & TELEPHONE WIRING WORKS) shall also be applicable. 36 S&F RJ 11 telephone socket with shutter, 1 module including modular cover plate, metal flush box (16 gauge) concealed in wall/roof complete all as specified anddirected. 37 S&F RJ 45 computer jack with cat no 6 socket, 1 module including modular cover plate, metal flush box (16 gauge) concealled in wall/roof complete all as specified and directed. 38 SOLAR ROOF TOP SYSTEM)WORKS NOTE:- For items of SOLAR ROOF TOP SYSTEM)WORKS notes given at the beginning of Sch ‘A’ Part-XI ( SOLAR ROOF TOP SYSTEM)WORKS) shall also be applicable. 39 Design, supply, installation, testing and commissioning of ON Grid connected roof top solar generation system of capacity not less than 55 KWp AC capacity all as specified in PS and directed as per PS clause and specification as follows (for (For Adm Bldg):-(A) Supply, Installation, testing and commissioning of not less than 55 KWp SPV system comprising of latest specification DCR solar photo voltic modules/array of high efficiency made of mono crystalline silicon solar PV cells with supply and fix of terminal box on the module havingprovision for opening & replacing the cable etc.as per IEC. The general features of PV modules shall be as given below :- a) The module shell be made up mono crystalline silicon cells.b) The interconnected cells shall be laminatedin vacuum to withstand adverse environmental conditions. c) The module frame is made of corrosion resistant materials, preferably having aluminium anodized finish. d) The minimum clearance between the lower edge of the modules & the developed ground level shall be 300 mm.e) Surge arresting devices to be provided at junction box and module shall be provided with bypass diode.f) The SPV module must be IEC 61215, IEC 61730 part I & part II, IEC 61701 certified from any of the accredited certifying agencies.g) Each solar PV module must be warranted by manufacturer at least 90% rated power at the end of 10 years & 80% at the end of 25 years. Note: Qty of PV module shall be decided as per OEM recommendation, design and layout drawing submitted to department duly approved by GE. 40 Note :-(i) Makes of panel provided shall be as per MNRE specification/ standard and registered in ALMM. (ii) 5% spare qty of modules shall be provided by the contractor for repair / replacement purpose. (iii) Addln module shall be provided / installed by the contractor to meet specified power output incase if the same not achived during testing and commissioning without any extra cost.(iv) Each PV module used in any solar power project must use a RF identification tag. The following information must be mentioned in the RFID used on each module:-(v) Name of the manufacturer of PV Module(vi) Name of the Manufacturer of Solar cells(vii) Month and year of the manufacture for solar cells and the module(viii) Country of origin (Make in INDIA only)(ix) I-Vcurve for the module(x) Wattage, Im, Vm and FF for the module(xi) Unique Serial No and Model No of the module(xii) Date and year of obtaining IEC PV module qualification certificate(xiii) Name of the test lab issuing EC certificate(xiv) Other relevant information on traceability of solar cells & module. 41 (B) Module Mounting Structure (MMS) :-Supply & fixing of the anti-corrosive factory made Gl structure on the RCC Roof for fixing of PV modules by fixing of suitable size fastner, spring washer, nuts & bolt. The minimum thickness of galvanization & mounting steel structure shall be as per IS 47592 & IS 2061-1992 respectively withstand the wind load of 180 Km/hr. as per IS 875. The array structure shall be fixed properly using maintenance free earthing kit. Note:-(i)The total load for roof top SPV should be less than 60 Kg/m2.(ii) The design of module mounting structure complying load withstand as per relevant IS alongwith fixing arrangement on roof shall be submittedby the contractor duly vetted from IIT/NIT/Govt Engg college for approval by GE.(iii) The material shall be corrosion resistant and electrolyticaly compatible with material used in module frame. (iv)The fasteners should be of stainless steel and should allow easy replacement of any module.(v) The minimum clearance of the structure from the roof level should be 300 mm. 42 (C) Solar DC Cables:- (i) Supply & laying of 1.1kv single core multi strandedPVC FRLSH insulated & unsheathed copper wire/ copper cable for 3 ph supply in ISI marked PVC rigid conduit pipe by saddling as per IEC. (For Solar Array DC supply connection). Note : (i) The size of cable shall be as per design given by OEM & approved by GE.(ii)Cable should be passes through PVC rigid pipe and pipe should be fixed properly inside cable tray for easily maintenance, is included in quoted rate(D) DC Combine boxA DC combine box shall be used to combine the DC cables of the solar module array with DC fuse protection for the outgoing DC cables to the DC distribution box. 43 (E) Array junction boxes_-The number of junction boxes as per design given by OEM are to be provided in the PV array for termination of connecting cables. All wire/cables must be terminated through cable lugs. Copper busbar/terminated blocks housed in the junction box conforming to IP 65 degree of protection with EPDM rubber gasket to prevent water entry. Junction boxes shall be mounted on the MMS such that they are easily accessible and protected from direct sunlight & harsh weather. (F) On Grid Power Conditioning unit ( Inverter):-Supply & installation of 415V 3-ph, 50 Hz microprocessor DSP type grid connected Inverters which converts DC energy produce by the solar array to AC energy such that it synchronizes with the existing AC power source on site. Provisioning of power manager to get all parameter details. The Inverter shall have inbuilt MPPT (Maximum Power Point Tracker) feature so as to extract maximum power from PV modules & the MPPT units environmental testing should qualify IEC 60068-2 (1,2,14,30)/ Equivalent BIS standard. (The voltage variation of +/- 10% & frequency variation +/-3 Hz)Note :-(i) No of inverters shall be provisioned as per design given by OEM. (ii) Inverter should have internal protection arrangements against any sustainable fault in feeder line and against the lightning on feeder.(iii) Should have isolating transformer(iv) Inverter efficiency >93% with inbuilt galvanic isolation) (v) No load losses shall be less than 1% of rated power.(vi) The above quoted rate is inclusive of MS structure stand duly fixed and placing inverter. 44 (G) Solar meter & Net meter:-As per DISCOM requirement, to be provided at main MRS. Cost of Solar meter & Net meter, installation, connected accessories, necessory liasioning with DISCOM are included in quoted Rates. If DISCOM desires installation of above meters through deposit work including NOC if required, then cost of deposit shall be made by contractor and amount shall be included in quoted rates.(H) AC Distribution Board:-(i) Supply & installation of 415V 3-ph 50Hz AC distribution board control AC power from Inverter & provided by nacessary surge arrestors system and suitable capacity MCCBs.; Qty-01 No Note: ACDB shall be provided as per OEM design as approved by GE.(J) AC Cables:-(ii) Distribution wiring in 1.1kv single core multi stranded PVC FRLSH insulated & unsheathed copper wire fixed on wall on PVC batten or saddle(For AC power supply from Inverter to AC distribution board Panel).Note :- (i) The size of cable shall be as per design given by OEM & approved by GE. 45 (K) Protection:-The system shall be provided with all necessary protection like earthing, lightening & surge protection as per relevant standard.(L) Performance testing:-Ratio between the theoretical energy outputs of the SPV plant is termed as performance ratio and is measured in accordance with IEC 61724. Based on prevailing climatic and temperature conditions in India, a performance ratio of 75% is expected for crystalline modules. (M) Other Misc items:-As per requirement given by OEM and approved by GE to be provided.(N) Earthing:_As per MNRE specifications to be provided.(O) Lightening protection:-As per MNRE specifications to be provided.(P) Installation, Testing & Commissioning:-As per safety norms of SERC/CEA to be provided.(Q) O&M and Warranty:-5 years from the date of commissioning to be provided. 46 Note: The quoted rate is deemed to be inclusive also of the following:-(i) Transportation charges with Transportation Insurance for the all material of on grid solar roof top system including loading & unloading at site from workshop.(ii) Insurance for the complete system for the 5 years.(iii) AMC-Suraksha which include 24 Hour site maintenance visits, response time 2 hrs and turn around time 48 hrs, Monthly plant performance report. (iv) As per performance obligation, the contractor shall maintain minimum capacity utilization factor (CUF) of 13%. The report shall be submitted by the contractor to GE as per guidelines promulgated by SECI. (v) Satisfactorily testing and commissioning of the system is to be done by the contractor in presence of the rep of accepting officer and the report of the complete system is submitted to department.(vi) Guarantee and warranty of solar panel and connected devices is to be submitted to department. (vii) The report of generated unit of solar power on monthly basis is to be submitted to office. 47 (viii) The cost of appropriate civil structure (Hot Dip Galvanised Iron structure) shall be included in quoted rate. The Civil structure incorporating Solar PV modules (arrays) should withstand the gusts of wind /cyclonic wind upto 150 km/hr from backside of panel.(ix) PV modules will be guaranteed against any manufacturing defect for 10 Years.(x) The contractor shall submitt design vetted from National Institute of Solar Energy or by Govt Institute authorised by MNRE or NISE or any reputed institute/ agency authorised.(xi) The quoted rate shall be inclusive of all the components as specifed here-in-above as well as Particular Specification, unless otherwise specified.(xii). Suitable fastening arrangement such as grouting and calming should be provided to secure the installation against the specific wind speed. The Empanelled Agency shall be fully responsible for any damages to SPV System caused due to high wind velocity within guarantee period as per technical specification. 48 All as per the description of Serial Item No 39 here-in-before but of 35 kwp AC capacity (ONE for Single Living Accn & One for Cook House Cum Dining Hall ). 49 Supply and fixing heavy duty self priming monoblock pump for cleaning of Solar Panel through pressure and fitted on mild steel base plate, having discharge of 638 gallon/hour at a pressure head of 15-42m complete with standard accessories including 1-HP, single phse, 220V rating electric motor complete with DOL starter of suitable rating complete all as specified and directed. 50 Supply and fix flexible, anti-twist, weather resistant, UV resistant thick water hose PVC pipe of size 15mm nominal dia for optimal water flow with leak proof tap adapter compatible with delivery pipe of mono-block pump (as specified in above item) with suitable reducer/enlarger with clamp for cleaning and washing of solar panels complete all as specified and directed. Note :- Make or quality as approved by GE. 51 Supply and fix adjustable type water spray gun compatible with PVC hose size of 15mm nominal dia, built of high quality brass material, durable and rust-proof, solid brass structure to ensure quick connection and with durable accessories, can withstand uptoPSI water pressure, and without any leakage of water complete all as specified and directed.Note :- Make or quality as approved by GE. 52 EXT WATER SUPPLYWORKS NOTE:- For items of EXT WATER SUPPLYWORKS notes given at the beginning of Sch ‘A’ Part-XII (EXT WATER SUPPLYWORKS) shall also be applicable. 53 Supply, laying, connecting, jointing and testing Centrifugally cast (spun ) 150mm dia ductile iron pressure pipe ISI Marked conforming to IS-8329-2000 ( Reaffirmed -2005 Edition 4.1 ) of following size with socket spigot ends, suitable for Push on Joints ( Tyton Joint ) each standard working lengths supplied with rubber gaskets duly ISI marked for water supply, ClassK-9 with socket with cement mortar lining inside and metallic Zinc coating with finishing layer of bituminous paint on outside the pipe with out polythylene sleeves but including Push on Joint supplied with ISI Marked EPDM rubber gasket conforming to IS-5382-1985 ( reaffirmed-2003 ) laid in trenchescomplete all as specified and directed 54 Supply, laying, connecting, jointing and testing centrifugally cast ( Spun ) 80mm dia Ductile iron Pressure pipe ISI Marked confirming to IS-8329-2000 ( Reaffirmed -2005 Edition 4.1 ) of following size with socket spigot ends, suitable for Push on Joints (Tyton Joint ) each standard working lengths supplied with rubber gaskets duly ISI marked for water supply, ClassK-9 with socket with cement mortar lining inside and metallic Zinc coating with finishing layer of bituminous paint on outside the pipe with out polythylene sleeves but including Push on Joint supplied with ISI Marked EPDM rubber gasket conforming to IS-5382-1985 ( reaffirmed-2003 ) laid in trenches complete all as specified and directed. 55 M&L for bends (any type, radius and angle) tapers and y type, (straight, bends increasing, decreasingor double socket etc.( Tee pieces single branch, Y junction, double branch, cross (all socketed or socket and spigot) collars caps and plugs complete all as specified and directed. 56 S&F 300mm dia sluice valve CI body ISI marked class PN 1.6 heavy duty flanged ends cast iron wheel with brass spindle (ISI marked) conforming to IS:14786-2000, short body all as specified including nuts, bolt, washers and gasket complete all as specified and directed 57 M&L for construction of brick masonry valve pit chamber of size 1200 x 1200 x1000mm including necessory earth work, PCC, copping plastering on internal surfaces of valve pit. Framed work for the valve pit chamber cover made of MS sheet 3mm thick conforming to Fe410-o and Fe 310-o, angle of size 40 x 40 x 5mmincluding welding, cutting, hinges locking arrangement complete and applying two coats synthetic enamel paint over a coat of red oxide primer on the valve pit cover complete all specified and directed. 58 M&L for construction of brick masonry valve pit chamber of size 900 x 900 x 600mm including necessory earth work, PCC, copping, plastering on internal surface of valve pit. Framed work for the valve pit chamber cover made of MS sheet 3mm thick confirming to Fe410-o and Fe 310-o, angle of size 40 x 40 x 5mm including welding, cutting, hinges locking arrangement complete and applying two coats synthetic enamel paint over a coat of red oxide primer on the valve pit cover complete all specified and directed 59 SCHEDULE ‘A’ PART – XV ( DEMOLITION / DISMANTLINGWORKS) 60 Taking down main switch, DB box including MCBs of capacity complete all as specified and directed. 61 Taking down services connection including disconnecting from pole DG/main switch complete all as specified and directed. 62 SCHEDULE A PART - XIII (ARBORICULTURE WORKS) 63 Supply and planting of following species of well grown (4 to 5 feet height)trees sampling with good roots including excavating a pit of size 2 feet x 2 feet x 2 feet in any type of soil & fill with the pit with Jaivik manure & suitable earth, including watering & spraying pestisides, fungisides etc. tying with aproximate 6 feet bamboo for supporting the plant wherever necessary & also replacing the dead plant/ sampling & its regular watering & maintanance till completion of two years maintanance period including spraying fungicides as and when required complete all as specified and directed. 64 Bottle Palm 65 Fish Tail Palm 66 Fox Tail Palm 67 Gulmohar 68 Bougainvillea 69 Ashoka Tree 70 Golden Shower 71 Jacaranda 72 Rain Tree 73 Heges ( 0.50 feet height) 74 Musanda 75 Agave 76 Crape mytale 77 Supply and planting of lawn carpet for landscaping including watering of carpet andwherever necessary & also replacing the dead plant/sampling & its regular watering & maintanance till completion of two years maintanance period including spraying fungicides as and when required complete all as specified and directed 78 Supply and installation for watering the following accessories:- 79 Pump & Pump Accessories 80 Filter 81 Valve 82 Pressure gauge 83 Air Valve 84 Fartigation Unit 85 Sprinkler 86 Unioun 87 Sadal 88 Pipe 2 inche including fittings 89 Pipe 1.5 inche & fittigs 90 Drip laternal tube 91 Micro connector 92 Wire and other control system 93 Pipe attachment and fittings 94 Cost of trannsportation & installation of Trees 95 Cost of installation and maintanace (2 years after completion) of drip irrigationand connected to main water supply etc complete all as specified and directed. 96 Preparation & levelling ofground for lawn carpert grass and plants complete all as specified and directed. 97 Maintanance of all plants, shrubs, lawn grass, etc for a period of 02years after certified comletion of subject work by employing skilled gardners any number as required on site per day to ensure healing up, keep of watering plants, pour manure, carying out periodic tilling and use pestisides, cutting grass and removing unwanted grass & plants at work site complete all as specified and directed.
Contract Date: Jun 30, 2026 Contract Value : ₹ 35.68 Crore
Statutory Bodies & Commissions/Committees No of Bidders 9
Madhya Pradesh View Result →
26.
Defence #9929205 AOC
Tender For Augmentation Of Power Supply At Naval Area Visakhapatnam.; 1 Schedule A Part – I to Schedule A Part – VII:NOTE: Schedule A Part – I to Part –VII are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only 2 Lumpsum price worked out by the contractor for BUILDINGS & STRUCTURES,as listed in Schedule A Part – I 3 Lumpsum price worked out by the contractor for SITE CLEARANCE / AREA DEVELOPMENT/EARTH WORK/EXCAVATION,as listed in Schedule A Part – II 4 Lumpsum price worked out by the contractor for INTERNAL ELECTRIFICATION, as listed in Schedule A Part – III 5 Lumpsum price worked out by the contractor for INTERNAL WATER SUPPLY, as listed in Schedule A Part – IV 6 Lumpsum price worked out by the contractor for SEWAGE DISPOSAL,as listed in Schedule A Part – V 7 Lumpsum price worked out by the contractor for EXTERNAL ELECTRIFICATION, as listed in Schedule A Part – VI 8 Lumpsum price worked out by the contractor for LIGHTENING PROTECTION ,as listed in Schedule A Part – VII 9 Schedule A Part - VIII: (Miscellaneous Items) ( Internal Electrification, Internal water supply, External Electrification, Site clearance & Area development, Lightening Protection and AC & Ref) 10 Internal Electrification 11 M&L for Ponit wiring with 1.5 sqmmPVC insulated and unsheathed copper conductorcable multistranded 1100 Volts grade, FRLS, ISI marked drawn through and inculding non metallic PVC rigid concealed conduit and conduit accessories, medium grade, ISI marked, concealed to wall or surface mounted on pillars/columns including provn of box type switchboard consisting of pre fabricated pressed steel terminal box of suitable size made out of 1.2 mm thick sheets,for mounting modular brackets,with and including modular brackets and switch plates as required at site for fixing modular type switches, sockets etc inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable for earth continuity green in colour, connected to earth duly complete all as specified and directed forOne light/ exhaust fan/ fanpoint controlled by one switch :-Note: (a) The PVC conduit shall be concealed and switch boards shall be flush to wall. (b) On columns/ pillars the box type switchboards surface mounted with necessary PVC conduit upto ceiling/nearest junction tapping shall be surface type conduitand quoted rate deemed to be inclusive for the same.(c) The quoted rate inclsuive necessary modules any type as per requirement incl all accessories complete 12 All as per item No. 10 abovebut one light point controlled by two Nos of two way switch complete all as specefied and directed. 13 All as per item No.10 above but One3 pin socket outlet 05 amps socket on independent board with 1.5 sqmm FRLS PVC wire for phase and neutral and one run of 1.5 sqmm copper cable green in colourfor earth continuty conductor complete all as specefied and directed. 14 All as per item No.10 above but One3 pin socket outlet 15 amps socket on independent board with 2.5 sqmm FRLS PVC wire for phase and neutral and one run of 2.5 sqmm copper cable green in colourfor earth continuty conductor complete all as specefied and directed. 15 All as per item No. 10 above but for one geycer/AC point with 4.0 sqmm FRLS PVC wire for phase and neutral and one run of 4 sqmm copper cable green in colourfor earth continuty conductor complete all as specefied and directed. 16 S&Fexhaust fan, steel body AC single Phase. 230 V of size 450mm sweep with, blades, and frame and louvers fixed on wall making opening, fixing and making good the distrubed surfaces etccomplete with and inclussive of making necessary electric connection from ceiling rose to fan through 1 sqmm twin core flexible wire all as spcified and as directed. 17 S&FLED tube light fitting, batten type,poly carbonate body, 20Watt fitting with all accessories, internally prewired and connecting up with with twin core twisted copper conductor cable of suitable size including tube lamp complete all as specified and directed. 18 S&FLED light fitting, batten type,suspended LED aluminium profile lights cool white 36 watt length 1200mm including all connections, hanging strings complete all as specified and directed. 19 S&FLED bay light fitting 70 Watt 230V AC indoor type with thermal management in multiple optics and industrial type and corrosion resistant complete with driver and lamp complete all as specified and directed. 20 S&FLED flood light fitting 210 Watt 230V AC out door type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. 21 S&F LED bldg Security light fitting 35 Watt, 230AC out door type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 ptoction complete all accessories including 1.5sqmm weather proof 3 core FRLS grade copper conductor to fitting including 32mm dia medium grade1.5 m long GI pipe for fixing of street lights, bend to shape for fixing on wall/pole withsuitable MS brackets nuts and bolts etccompelte all as specified and as directred. 22 M&L for submain wiring complete with earth wire of PVC insulated multistranded copper conductor FRLS cable, ISI marked with and inclussive of suitable size PVC rigid counduit concealed to wall/roof, and PVC wire of size 2x2.5 sqmm for phase and neutral duly colour coded and 1x2.5 sqmm for earth continuity conductor green in colour complete all as specified and as directed.( for SPN DB to board and submain wiring of building security light)Note :(i) Two run of 2.5 Sqmm + one run of 2.5 Sqmm as a earth wire cable + one run of PVC conduitshall be measured as an one Unit. 23 M&L for submain wiring complete with earth wire of PVC insulated multistranded copper conductor FRLS cable, ISI marked with and inclussive of suitable size PVC rigid counduit concealed to wall/roof, and PVC wire of size 2x4 sqmm for phase and neutral duly colour coded and 1x4 sqmm for earth continuity conductor green in colour complete all as specified and as directed.Note :(i) Two run of 4 Sqmm + one run of 4 Sqmm as a earth wire cable + one run of PVC conduitshall be measured as an one Unit. 24 M&L for submain wiring complete with earth wire of PVC insulated multistranded copper conductor FRLS cable, ISI marked with and inclussive of suitable size PVC rigid counduit concealed to wall/roof, and PVC wire of size 4x10 sqmm for phase and neutral duly colour coded and 1x10 sqmm for earth continuity conductor green in colour complete all as specified and as directed.Note :(i) four run of 10 Sqmm + one run of 10 Sqmm as a earth wire cable + one run of PVC conduitshall be measured as an one Unit. 25 S&F VTPN MCCB DB 4 way 12 outgoing having powder coated sheet steel enclosure fitted with bus bar, DIN channel & neutral link & earth link complete all as specefied and directed. 26 S&F TPN DB 4 way 12 outgoing having powder coated sheet steel enclosure double door fitted with bus bar, DIN channel & neutral link & earth link complete all as specefied and directed. 27 M&L for earthing complete with GI steel plate electrode 600x600x6 mm, burried directly in ground (earth pit not less than 2.25 m deep below ground level)with top edge of the plate not less than 1.5 m below normal groundlevel, connected to GI wire 4 mm dia (upto 7.5M in length from earth plate) by means of bolts, nuts, check nuts and washers of GI all as shown in electrical plate No-3 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipelight grade for watering pipe and 32 mm bore GI light grade for earth lead protection pipe connected upto DBs, and suitable CI top cover with handle, funnel, strainer,charcoal, salt and testing on completion all as specified and directed. Note- Rate quoted deemed to be include excavation and earth work in any type of soil with PCC workcomplete all as specefied and directed.Note: GI earth wire upto 7.5 m shall be deemed to be included in the quoted lumpsum and beyond 7.5 m shall be measured and paid separately under relavent item. 28 Internal Water Supply 29 S&F Bib taps two way, cast copper alloy fancy typechromium plated with crutch or butterfly handle, screwed down for size of15 mm inner dia, suitable fo 16 mm outer dia CPVC pipes complete all as specified and as directed. Make:- Jaquar cat No. OPP-15041PM or equivalent 30 SITE CLEARANCE / AREA DEVELOPMENT/EARTH WORK/EXCAVATION 31 M&L for cleaning jungle incl uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm and removal of rubbish upto a distance of 50 m outside the pheiphery of the area cleared all as specified and as directed. 32 External Electrification 33 Supply, Installation, Testing and Commissioning of Copper wound Power transformer step down outdoor type 132/33 KV, capacity16 MVA(suitable for 10/16MVA cooling), ONAN/ONAF, Vector group Star/star (YNyn0) with on load tap changing gear (+) 5% to (-)15% in steps of 1.25% on HV side, with terminal arrangement of HV Outdoor Bushings/LV Bushing and all standard accessories as per IS 2026 and as specified in PS, including first fill of oil complete comprising the following accessories:-a)Conservator Tankb) Pressure Relief Devicec) Buchholz Relay & Oil Surge Relayd) NCT on EHV and HV sidee) Oil Temperature Indicator (OTI)f) Winding Temperature Indicator (WTI)g) Oil Sealingh) Breatherj) Aircell in conservator tankk) Radiators and control valvesl) Each radiator tank shall have its own cooling fans, shut off valves at the top and bottomm) motor operated OLTC shall be n) On load tap changing with RTCC panelo) Marshalling boxp) Thermosphyn filter 34 q) Terminal Connectorsr) Direct solid earthing both HV side and LV sides) Name Plate (Rating, Diagram and Valve Plates)t) Metallic enclosed NGR as per OEMu) NIFPS to be installed by OEMTransformer rating plate shall contain the information as given in IS-2026 (Part-I).Makes: Bharat Bijlee/Crompton Greaves / Schneider / Siemens 35 Note : a) PCC foundation and mounting rails, all civil work, etc and general works which are required as per site/technically required to achieve optimum efficency of the transformer are to be supplied by the contractor for which rate is deemed to be included in the unit rate quoted.b)Size of plinth, PCC, Rail size etc shall be as per OEM recommendation.c) Technical drgs of the transformer alongwith NIFPS submitted by the contractor is required to be approved by the accepting officer before taking procurement action and the Transformer to be inspected by the rep of accepting officer at various stages at Factory premises as per IS before despatch.d) pre-commissioning inspection of Transformer shall be carried out by Senior Electrical Inspector / Electrical Inspector.e) Manufacturer shall possess NABL accredited test lab for electrical testing(Routine test, type test and special test) 36 f)Full Type Test Reports of at least the followings must be submitted: -1. 132/33 kV Power Transformer for same capacity or higher2. Tap Changer3. Buchholz Relay4. Pressure Relief valve5. Oil Surge Relay6. Temperature rise test7. Impulse test 8. Load and No load loss 37 Supply, install, test and commission lightning arrestor single pole made of polymer , heavy duty station class, gapless, zinc oxide type (non linear) fitted with pressure relief device, arc diverting ports, grading/corona rings, discharge counter with ammeter, mounting insulator complete all as specified and as per IS 3070 (Part I) and with following parameters:- Nominal system voltage : 132 KVNormal discharge current rating : 10 KA .Note- The cost of Galvanised Iron lattice structure including foundation (as Per OEM) is deemed to be included in the Quoted rate 38 Supply, Installation, Testing and Commissioning of cable XLPE insulated, armoured, 132 KV grade (E) copper conductor UG cable, laid in trenches/on structures/in cable duct horizontally or in tier formation as per site condition complete all as per IS specifications of size. 1 C x 630 sqmm. The cable shall be of EHV grade single core, armoured stranded compacted circular Copper conductor of cross section 630 sq.mm, core screening by a layer of semiconducting tape followed by a layer of semiconducting compound, cross linked polyethylene (XLPE) dry cured insulation, insulation screening with semiconducting compound extruded directly over the insulation, longitudinal sealing by a layer of non woven tape with water swellable absorbent over insulation screen, followed by radial sealing of corrugated & seamless or seam welded aluminum with asphalt coating & overall PE sheathed & graphite coated/semi conducting layer and conforming to the technical particulars of specification.IS 7098 part 3 shall be followed for manufacturing of cable along with technical specification. Makes: Universal/ KEI /RPG/CCI.Note- Technical details of the cable submitted by the contractor is required to be approved by the accepting officer before taking procurement action and the cable to be inspected by the rep of accepting officer at Factory premises as per IS before despatch. 39 Supply, lay, connect, test and commission multi core copper conductor cables, PVC insulated, LT 1100 volts grade GI strip/wire armoured in ducts/on structuresincluding clamps, terminations on both ends with glands and connecting up to the equipment all as specified and of following sizes:- 40 4 core 1.5 sqmm 41 4 core 2.5 sqmm 42 6 core 2.5 sqmm 43 6 core 4 sqmm 44 Supply and fix GI cable tray perforated on walls/MS angle iron supportsof depth 100mm following widths including bends, coupler plates complete all as specified.Note: Angle iron used for fixing cable trays will be measued and paid separately. 45 200 mm width 46 300 mm width 47 Material and labour for provision of earthmat laid in trenches/ ducts/ walls made of following sizes of GI strips including jointing by means of brazing complete all as specified :- 48 GI 100 x 10 mm 49 GI 75 x 10 mm 50 GI 50 x 6 mm 51 GI 32 x 6 mm 52 Supply and fix earth strip following sizes laid in trench/ floor/ walls including jointing by means of brazing complete all as specified :- 53 100 x 10 mm copper strip 54 50 x 6 mm copper strip 55 32 x 6 mm copper strip 56 Supply, installing, testing and commissioning of CPRI approved LT panel board, cubical indoor type, fabricated out of 2.00 mm thick CRCA sheet with angle iron frame made of 50 x 50 x 6mm at vertical corners & medium channel at base of panel board floor mounted, dust and vermin proof, with busbar 200 Amps suitable for voltage 415 V 3 phase 4 wire weather proof, with separate hinge door for each compartment with locking arrangement, with back door common openable (screwed), groutedin PCC 1:2:4 complete incl painting the steel surfaces with two coats of zinc chromate primer & two coats of epxoy paint suitable for installation in coastal areas and incl of suitable size aluminium busbar (TPN), suitable cable glands, LED Indicating lamps and incl provn of the following:- 57 (i) 4 Pole MCCB 25 KA 100 A - 1 Nos (I/C)(ii) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA - 03 No (iii) 4 Pole MCCB 40 Amp, 50 Hz, 415 V with rupturing capacity 25 KA - 02 No (iv) 4 Pole MCCB 25Amp, 50 Hz, 415 V with rupturing capacity 25 KA - 02 No (v) Digital voltmeter with selector switch - 1 No (vi) Digital ammeter with CTs & selector switch - 1 No (vii) LED indicating lamps - 8 sets (3 lamps/set) 58 Supply and lay in trenches HDPE pipe Double wall corrugated 200 mm dia with integral socketsfor cable protection including necessary collars, earth work and sealing at both ends with bitumen compound complete all as specified. 59 Supply, lay, connect, test and commission cable LT 1100 volts heavy duty XLPE insulated armoured aluminium conductors, in trenches/ ducts on angle iron supports including glanding, crimping and connecting up complete all as specified and of following sizes:- 60 3.5 Core x 95 sqmm 61 4 Core x 25 sqmm 62 Supply, Installation, Testing and Commissioning Earthing complete with Galvanised Iron plate electrode 600x600x6 mm thick buried directly in ground(earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI earth strip 32 x 6 mm by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part I including Charcoal and rock salt with necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber Hinged to CI frame with MS bar 6mm dia 150mm c/c reinforcement, watering funnel with 15 mm dia medium grade for watering and for protection of earth electrode 40 mm dia light grade GI pipe all as specified and directed and tested on completion. 63 Supply, Installation, Testing and Commissioning Earthing complete with copper earth plate electrode 600x600x3 mm thick buried directly in ground(earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to copper earth strip 25 x 3 mm by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part I including Charcoal and rock salt with necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber Hinged to CI frame with MS bar 6mm dia 150mm c/c reinforcement, watering funnel with 15 mm dia medium grade for watering and for protection of earth electrode 32 mm dia light grade GI pipe all as specified and directed and tested on completion. 64 Boring of holes under road, pavement, hard standing by trenches by trenchless technologyas per site conditions using ultra sound technique and necessary machinery complete all as specified 65 depth of trench varying between 2 to 4 meters 66 depth of trench varying between 4 to 7 meters 67 Supply, Installation, Testing and commissioning ofindoor, metal enclosed corrosion proof aluminium alloy gas insulated switchgear 145 KV 3Phase 50 HZ, 2500 Amps, Three phase encapsulated consisting of2 nos outgoing transformer bay in either side of the existing GIS (Siemens) including installation tools, spares, refill kits all as specified. Makes: ABB/CG/GE/SIEMENS 68 Each Transformer feeder bay consists of the following: 2Nosa) Circuit breaker SF6 insulated 145 KV 2500 A 3 pole with short circuit current with stand capacity of 40 KA for 3 sec - 1 No.b) Disconnector cum earthing switch SF6 insulated, 145 KV 2500 A 3 pole motor operated - 2 sets.1 set on Bus side and 1 set on line side.c) Fast acting earth switch SF6 insulated 145 KV motor operated - 1 sets. d) Current transformer 145 KV 300-150/5+5+5 with Core 1:class 0.2, 15 VA , Core 2 : 5P20, Core 3 : PS class, 15 VA respectively - 1 Set (Three Nos).e) Three phase Voltage transformer 0.2 class accuracy, 10 VA burden,145 KV, 132 KV/√3/110V/√3 - 1 set.f) Lightning arrestor gapless type metal zinc oxide type 120 KV rms 10 KA including discharge counter and leakage current meter.g) Bus bars 145 KV 2500 Amps 3Ø - required as per scheme.h) Cable end box suitable for 132 KV system - 1 No.j) Local control panel- 1 No. 69 Note : The GIS system offered by the bidder shall be designed, manufactured, assembled and tested in accordance with the IEC 62271-203 for switch gear and other relevant IEC andfor balance materials as mentioned in PS. The GIS Outgoing bays are to be installed with the existing GIS extension (Siemens Make ) interface in either sides of the setup. Bidder has to supply the following items along with GIS system and costis deemed to be included in GIS system. Civil foundation / mounting rails, all civil work, etc and general works which if required as per site/technically required to achieve optimum efficency are to be supplied by the contractor for which rate is deemed to be included in the unit rate quoted. Erection & commissioing shall be under OEM recommendation and supervision. The earth connection from GIS euipment to earth grid/matt as per OEM recomendation and the cost of same is deemed to be included in the unit price. Technical drgs of the GIS module submitted by the contractor is required to be approved by the accepting officer before taking procurement action and the GIS module to be inspected by the rep of accepting officer at Factory premises as per IS before despatch. Pre-commissioning inspection of GIS module shall be carried out by Senior Electrical Inspector / Electrical Inspector. 70 a) Local control cubicles.b) Gas handling equipment for draining and refilling of each compartment of GIS including filtration and purification equipment and vacuum pump. c) SF6 gas sufficient for first filling of entire switch gear including usual losses during commissioning.d)1 Bottles (40 Kg each) of SF6 gas in non returnable vessels. e)Gas leakage detectors.f) Gas Purity Tester for air content and moisture content in SF6 gas. g)Special tool and tackles for erection operation and maintenance of GIS h)Mandatory spares and tools ( Aux contact ( for CB, Busbar disconnector), Motor for CB drive (DS-ES drive), Bursting Disc, Adsorber, Density Monitor for CB, Tripping coil, Closing Coil. - 01 set Each.(i) Bay control unit. 71 Supply, Installation, Testing and Commissioning of control and relay simplex type panel with front swing & front perplex glass door RAL7035 natural IP 32 ventilation for 132/33 KV transformers protection consisting of the following: 72 a) Numerical Transformer Differential Protection Relay Make- ABB/Siemens – 1nob) Numerical Backup Protection Relay of Make - ABB/Siemens – 1noc) Tri Vector Meter - Secure make Premier 300 or Equivalent- with ABT & RS485 (modbus) port, RJ 45 port Accuracy class 0.2S- 2nod) Auxiliary Relay - with self-reset contacts. Operating time<20ms. (4 Contacts) of Make ABB/Siemens – 5nose) DC/ACSupply Supervision-200ms 73 Supply, Installation, Testing and Commissioning of 145KV 630A 40KAOil filled outdoor termination with composite insulator, solid rod connector bolt and support insulators for cables with XLPE insulation. The termination base plate and the cables metallic sheath shall be electrically insulated from the supporting structure by means of self-supporting stand-off insulators or any other self-supporting means designed to withstand both mechanical and electrical stresses in services. The stress cone shall inhibit possible mechanical stress and deformation of the cable insulation surface during operation and also shall be capable of accommodating minor radial and longitudinal movement without determent to the dielectric stress in the insulation shield. The termination shall be within polymeric or porcelain hollow insulator in brown or grey colour as perstandard practice of manufacturing in addition upon, arcing horn and shield ring shall have to be supplied wherever required. The termination shall be filled with an insulating compound up to a level where the electric field is substantially reduced and shall be offered. Oil filled termination should have silicon oil as di-electric medium. Silicon oil should not be subject to any heating at site prior to filling. The outdoor terminal should be suitable for very heavily polluted atmospheric conditions with total creepage distance of 31 mm/ kV and protected creepage distance of not more than 50% of the total Creepage distance. The cable end terminals for terminating the cables shall be fully compatible with the cables to be supplied. Civil foundation / Supporting Strcuture etc and general works which are required as per site/technically required to achieve optimum efficency are to be supplied by the contractor for which rate is deemed to be included in the unit rate quoted. 74 Supply, Installation, Testing and Commissioning of 145kV Dry type GIS termination suitable for XLPE 132 KV IC x 630 sqmm including necessary accessories , fixtures and fittings of complete installation etc complete all a specified and directed.Indoor Termination at GIS SF6 Housing It shall be dry type without insulating oil. There shall be mechanical devices to maintain the interface pressure if requires. It shall be based on the EPR (Ethylene-Propylene Rubber)- based or silicon based stress relief cone. Termination shall be dry type without insulating oil. Stress relief cone and mechanical devices shall be designed to fit with controlled interference over the cable insulation and shall follow the cables diameter variations still guaranteeing under any service condition a sufficient positive pressure to control the electric field concentration. Plug-in type leading conductors shall be supplied though at the time of detailed engineering confirmation shall be given for selection of normal type, blind type or plug-in type. Design and scope of delivery shall be fully complying with IEC-60859, IEC-62271-209 and possibly adjusted the various needs of project. The main insulation components shall be fully examined and tested in the factory.For cable Termination purpose only certified (certification from cable accessories manufacturer ) personnel shall be employed. Make: Raychem or Equivalent 75 Supply, Installation, testing & commissioning ofHT 33KV VCB line up of Six panels switchboard consisting of 1250A, VCB 33 KV - 2Nos as incomer with Bus coupler cum Bus Riser 1250A VCB 33 KV-1 No with 1250A VCB 33 KV- 3Nos as outgoing.VCB panel indoortype totally enclosed, free standing floor mounting type, compartment based with truck mounted vacuum circuit breaker spring operated electrically and manually charged operating mechanism suitable for horizontalisolation, horizontal draw out type VCBs with copper bus bars, Self supported Insulated Busbar with full voltage rated should be used. Complete VCB panel confirming to IEC 62271-200 standards and IP 4X class of protection comprising necessary bus-bars extension and connections and following protective and control devices as specified below. Circuit Breaker shall be suitable for E2, M2 & C2 duty. Vacuum Interrupters of the circuit breakers shall be completely encapsulated in epoxy housing. The manufacturer of circuit breaker & Panel shall also be the manufacturer of the Vacuum Interrupter, Relay. The switchgear and control gear panels shall be of the fully arc proof for 25 kA for 1Sec AFLR complete all as specified and as directed.Make: ABB /CG / Schneider / Siemens. 76 A. INCOMER-2 Nos ( Each consisting of )33kVIndoorSwitchgear Panel consisting of Breaker-1250A, 25kA draw out type having following accessories :-a. 230VAC Spring Charge Motor.b.110VDC Closing Coil.c.110VDC Shunt Trip Coil.d. Current Transformer Indoor Single Phase Resin Cast Ratio: 400-200/5+5+5 A Core-1: 15VA Class 0.5, Core -2 5P20, Core -3: Class PS - 3nos.e. Potential Transformer Draw out TypeResin cast Ratio : 33KV/√3/110V/√350VA, CLASS: 0.5-3 Nos.f.12 Window Annunciatorg.Digital Ammeter with ASS.h.Digital Voltmeter with VSS.i.Multifunction Load Manager Class 0.5 with RS485 & Ethernet communication.j.Master Trip Relay, TCS Relay , TNC Lockable Type, Manual/Remote Selector Swithc etc.,k. Numerical Protection IEC 61850 Draw out Relay with Graphical display- 1nowith Three Phase O/C & E/F (50, 51, 50N, 51N, 50G, 51G),Three Phase Directional O/C & E/F (67/67N), Negative Phase Sequence O/C (46) ,Inrush Detection (68), Circuit Breaker Failure Protection (50BF), Broken Conductor (46BC), Three Phase O/V, U/V & NDR (27, 59, 59N) ,Thermal Overload (49),Negative Sequence Overvoltage (47) ,Reverse Power (32),Over Frequency (81O), Under Frequency (81U), CT Supervision (60 CTS) ,VT Fuse Failure (60 VTS), 87C (differential P) and 64 (Restricted earth fault) .Relay shall have 8 DI and 8 DO. Makes: ABB/CG/Schneider/Siemens. 77 B. OUTGOING - 3 Nos ( Each consisting of )33kVIndoorSwitchgear Panel consisting of Breaker-1250A, 25kA draw out type having following accessories for Transformer Outgoing.a. 230VAC Spring Charge Motorb.110VDC Closing Coil.c.110VDC Shunt Trip Coil.d. Current Transformer Indoor Single Phase Resin Cast Ratio: 400-200/5+5A Core-1: 15VA Class 0.5, Core -2 5P20, Core-3 : PS class- 3 nos.e.12 Window Annunciator.f.Digital Ammeter with ASS.g. Digital Voltmeter with VSS.h. Multifunction Load Manager Class 0.5 with RS485 & Ethernet communication i. Master Trip Relay, TCS Relay , TNC Lockable Type, Manual/Remote Selector Swithc etc.,j. Numerical Protection IEC 61850 Draw out Relay with Graphical display- 1nowith Three Phase O/C & E/F (50, 51, 50N, 51N, 50G, 51G),Three Phase Directional O/C & E/F (67/67N), Negative Phase Sequence O/C (46) ,Inrush Detection (68), Circuit Breaker Failure Protection (50BF), Broken Conductor (46BC), Three Phase O/V, U/V & NDR (27, 59, 59N) ,Thermal Overload (49),Negative Sequence Overvoltage (47) ,Reverse Power (32),Over Frequency (81O), Under Frequency (81U), CT Supervision (60 CTS) ,VT Fuse Failure (60 VTS), 64 (Restricted earth fault).Relay shall have 8 DI and 8 DO. Makes: ABB/CG/Schneider/Siemens. 78 C. BUS COUPLER- 1 Nos ( Each consisting of )33kVIndoorSwitchgear Panel consisting of Breaker-1250A, 25kA draw out type having following accessories for Transformer Outgoing.a. 230VAC Spring Charge Motor.b.110VDC Closing Coil.c.110VDC Shunt Trip Coil.d. Master Trip Relay, TCS Relay , TNC Lockable Type, Manual/Remote Selector Swithc etc.,e. Electrical & Mechanical Interlocking.f. Numerical Protection Relay with all protection.g. ABT scheme with Manual Option.Note:The above said panelsEarthing truck -01 nos. Earthing truck shall be so designed that it is impossible to earth alive. It shall be provided with capacitive voltage detection with audio visual annunciation. Technical drgs of the VCB panel submitted by the contractor is required to be approved by the accepting officer before taking procurement action and the VCB panel to be inspected by the rep of accepting officer at Factory premises as per IS before despatch. Pre-commissioning inspection of VCB panel shall be carried out by Senior Electrical Inspector / Electrical Inspector. The VCB panel should be GSM based SCADA compatible. 79 Supply, Installation, Testing and Commissioning of Three Phase 4Wire 110V/50A FCBC Thristor based with in-built DCDB and RS485 communicationsuitable for 110V/200AH VRLA battery with 55 Cellsin complete as specified and directed. Make: Amararaja/Exide 80 Supply, installation, testing and commissioning of cable 3 Core 300 Sq.mm 33KV(E) XLPE cable grade cable of size suitable for earthed system having compacted circular stranded aluminium conductor shielded with semi-conducting compound extruded layer XLPE insulated dry cured core shielded with semi-conducting compound extruded layer followed by metallic copper foil, screened inner sheath of extruded PVC, galvanized single flat steel strip armoured and PVC sheathed overall conforming to IS: 7098/Part-II/1985, as amended upto date with ISI marked of following sizes in VCV manufacturing process.Note- Technical details of the cable submitted by the contractor is required to be approved by the accepting officer before taking procurement action and the cable to be inspected by the rep of accepting officer at Factory premises as per IS before despatch 81 S&F of Cable jointing kit for 33 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 300 Sqmm 3 core complete all as specified and directed. 82 S&F of Cable jointing kit for3 Core 300 Sq.mm 33 KV grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable complete all as specified and directed. 83 S&F of Cable jointing kit for 3 Core 300 Sq.mm 33 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable complete all as specified and directed. 84 Supply, laying & testing of 11KV(E)XLPE insulated cable of following sizes suitable for earthed system having compacted circular stranded aluminium conductor shielded with semi-conducting compound extruded layer XLPE insulated dry cured core shielded with semi-conducting compound extruded layer followed by metallic copper foil, screened inner sheath of extruded PVC, galvanized single flat steel strip armoured and PVC sheathed overall conforming to IS: 7098/Part-II/1985, asamended upto date with ISI marked of following sizes in VCV manufacturing process. 85 3 Core 240 Sq.mm 86 3 Core 400 Sq.mm 87 Supply, laying & testing of 11KV(E)XLPE insulated cable of following sizes suitable for earthed system having compacted circular stranded copper conductor 1 core 1000 sqmm shielded with semi-conducting compound extruded layer XLPE insulated dry cured core shielded with semi-conducting compound extruded layer followed by metallic copper foil, screened inner sheath of extruded PVC, galvanized single flat steel strip armoured and PVC sheathed overall conforming to IS: 7098/Part-II/1985, asamended upto date with ISI marked of VCV manufacturing process. 88 S&F for Cable jointing kit for 11 KV grade cable for Outdoor End termination kit heat shrink type joint complete with jointing material and accessories suitable for 1 core 1000 sqmm XLPE armoured copper conductor cable sqmm etc complete all as specified and directed. 89 S&F for Cable jointing kit for 11 KV grade cable for Indoor End termination kit heat shrink type joint complete with jointing material and accessories suitable for 1 core 1000 sqmm XLPE armoured copper conductor cable sqmm etc complete all as specified and directed. 90 S&F for Cable jointing kit for 11 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm etc complete all as specified and directed. 91 S&F of Cable jointing kit for 11 KV grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of following sizes etc. complete all as specified and directed. 92 3 Core 240 Sq.mm 93 3 Core 400 Sq.mm 94 Design, Supply, Installation, Testing and Commissioning of GSM based energy management system/ substation automation system with suitable software capable of taking care of complete data monitoring, data logging and control functions at 132 MRS consisting of 2 Nos 132 KV GIS, 6 Nos HT 33 KV VCBs at MRS , 7 Nos 33 KV VCBs at NSB Substation, 8 Nos 11 KV VCBs at NSB and other allied switchgears at 33/11 KV substation at DH complete with servers, work stations, desk top computers, operating system, communication products and object softwares assembled from industry standard products all as specified 95 a) BCU suitable for substation automation.b) Integration with Existing Scada server.c) Fibre/Eithernet switch (for station level & bay level) -8 sets.d) RTU (with redundant RTU , Power Supply & Hot Swappable IO configuration) - 2 set.e) SCADA software.f) Suitable Modems & ALUs.h) Integration with Existing central SCADA software- 1 set.Note- a) The SCADA system is GSM based and to be integrated with existing SCADA server. b) The cost of Connecting cable (e.g-Optical fibre cable Network, CAT 6 cable Armoured/unarmoured etc) and accessories for integration of IED, Ethernet and RTU, ALU, IED (Relay) as required at site is deemed to be included in the unit price. c) Technical drgs of the SCADA submitted by the contractor is required to be approved by the accepting officer before taking procurement action . 96 Supply and fixing in position Retardant/ extinguishing electric insulated synthetic mat2.5 mm (+/-) 10% thick conforming to BIS -DOC No ET-02 (540) dt 30/04/2004, meeting requirements of IS- 3043, IS-5216 (Part-1, 2 & 3), IS-15652:2006 and IEC 479 Pub-I tested having minimum width of 1000 mm (+/-) 20 mm. All allied materials such as PU-Resin Chemical bond (hardener), special PVC adhesive liquid primer and qty required to complete the job as per site requirement suitable for all voltages not exceeding 33/11 KV system complete all as specified. 97 M&L for RCC cable route indicator semi-circular shape on top of size 600x450x100 mm casted in PCC 1:3:6with TMT bar of size 10 mm dia and foundation base casted in RCC 1:2:4, grouted in earth upto 550 mm duly engraved the following letters HT UG CABLEwith two coats of antifungal weather coat paint, etc all as specified and directed. 98 S & F for Display chart (set of 2 nos) of size 6 x 4 duly made on white polyvinyl sheet exactly showing the locations of the yard and the machineries and equipments installed in the sub-station duly marked properly with legends etc, and a separate chart showing the details of machineries installed with nos, capacity/ rating and make with computer cutting letters of approved size on poly vinyl sheet all as specified and directed. 99 S&F for Display chart (set of 2 nos) of size 4 x 5 duly made on white polyvinyl sheet exactly showing the lay out of transmission and distribution of HT UG cable routes, locations of the HT Joints, drawn on autocad, etc duly marked properly with legends, with computer cutting letters of approved size on poly vinyl sheet, all as specified and directed. 100 S & F for shock treatment chartof size 1.5 m x 1.5 m x 0.025 m duly laminated with wooden frame (tick wood)enclosure all as specified and fixed in position as directed by Engineer-in-charge. 101 S & F First aid GI box containing prescribed medicines for first aid box as per standard quality and quantity each as required to provide first aid treatment in an emergency complete all as specified 102 Supply, Installation, Testing and Commissioning of Power transformer step down outdoor type 33/11 KV, capacity 16 MVA (suitable for 10/16MVA cooling), ONAN/ONAF, Vector group Delta/star (Dyn11) with on load tap changing gear (+) 5% to (-)15% in steps of 1.25% on HV side, with HV/LV Cable Box and all standard accessories as per IS 2026 and as specified in PS, including first fill of oil complete comprising the following accessories:-a)Conservator Tankb) Pressure Relief Devicec) Buchholz Relayd) Oil Surge Relaye) Oil Temperature Indicator (OTI)f) Winding Temperature Indicator (WTI)g) Oil Preservation Equipment likeh) Oil Sealingj) Breatherk) Aircell in conservator tankl) Radiators and control valvesm) Each radiator tank shall have its own cooling fans, shut off valves at the top and bottomn) motor operated OLTC shall be o) On load tap changing with RTCC panelp) Marshalling boxq) Thermosphyn filterr) NIFPS to be installed By OEM 103 Note- i) Technical drgs of the Transformer alongwith NIFPS submitted by the contractor is required to be approved by the accepting officer before taking procurement action and the Transformer to be inspected by the rep of accepting officer at various stages at Factory premises as per IS before despatch. Pre-commissioning inspection of Transformer shall be carried out by Senior Electrical Inspector / Electrical Inspector.ii) The rate quoted is deemed to include the cost of PCC / Brick Masonry Foundation / Platform of transformer as per OEM recommendations and finishing the top surface even and smooth.iii) Manufacturer shall possess NABL accredited test lab for electrical testing(Routine test, type test and special test.iv) Type test reports of33/11 KV Transformer of same capacity or higher Such as Temperature rise, Impulse test, Short circuit test , Vacuum Tests of Tank & Radiator, No Load & Load Loss test and tap changer to be submitted by the bidder during Drawing approval 104 Supplying, Installing, Connecting, Commissioning and Testing of Transformer, Step Down, Outdoor Type, Floor or Platform Mounted complete with standard fittings, 33 KV / 433 V [at No load], AC, 3 Phase, 50 Hz, of 100 KVA capacity, Double Copper Wound, K class Natural Ester Oil immersed, CRGO Core type Naturally cooled, Built-up with class A insulation, having Primary Voltage [HT] 33 KV and Secondary Voltage [LT] of 433 Volts, Delta connected on 33 KV Side & Star connected on 433 Volts side, designed & constructed with particular reference to Tropical Condition, conforming to IS – 1180-2014, including PCC / Brick Masonry Foundation / Platform as per IE Rules, fixing HT / LT Busbar and Cables etc. complete all as specified and as directed andcomprising of the following Specification and Fittings:Continuous Rating: 100 KVANo-Load Voltage Ratio : 33 KV / 433 V Tapping on HV[%]: ± 7.5, ± 5, ± 2.5Phase & Frequency : 3 Phase & 50 HzConnection: Delta StarVector Group : DYN 11Cooling : KNANType: OutdoorNote: The rate quoted is deemed to include the cost of PCC / Brick Masonry Foundation / Platform as per OEM recommendations and finishing the top surface even and smooth complete all as per manufacturer’s recommendations, as specified and as directed. 105 Fittings:[a] Externally hand operated Off–Circuit Tap Switch with position indicator and locking device.[b] Conservator with Oil Gauge, filling hole with plug & drain hole with plug[c] Undercarriage with four plain rollers[d] Oil filling hole cum air release plug[e] Drain Valve cum Sampling Valve[f] Top Filter Valve with Plug[g] Rating Plate with Diagram Plate[h] Lifting lugs for Transformer[j] Lifting lugs for Core[k] Earthing Terminals[l] Thermometer Pockets[m] Silica Gel Breather[n] Explosion Vent[o] Marshalling Box with Double Window[p] OCTC.Note- Technical drgs of the Transformer submitted by the contractor is required to be approved by the accepting officer before taking procurement action and the Transformer to be inspected by the rep of accepting officer at Factory premises as per IS before despatch. Pre-commissioning inspection of Transformer shall be carried out by Senior Electrical Inspector / Electrical Inspector. 106 Supply, Installation, testing & commissioning ofHT 33KV VCB line up Seven panels switchboard consisting of 1250A, VCB 33 KV - 2Nos as incomer with Bus coupler cum Bus Riser 1250A VCB 33 KV-1 No with 1250A VCB 33 KV- 4Nos as outgoing.VCB panel indoortype totally enclosed, free standing floor mounting type, compartment based with truck mounted vacuum circuit breaker spring operated electrically and manually charged operating mechanism suitable for horizontalisolation, horizontal draw out type VCBs with copper bus bars, Self supported Insulated Busbar with full voltage rated should be used. Complete VCB panel confirming to IEC 62271-200 standards and IP 4X class of protection comprising necessary bus-bars extension and connections and following protective and control devices as specified below. Circuit Breaker shall be suitable for E2, M2 & C2 duty. Vacuum Interrupters of the circuit breakers shall be completely encapsulated in epoxy housing. The manufacturer of circuit breaker & Panel shall also be the manufacturer of the Vacuum Interrupter, Relay. The switchgear and control gear panels shall be of the fully arc proof for 25 kA for 1Sec AFLR complete all as specified and as directed.Make: ABB /CG / Schneider / Siemens. 107 A INCOMER-2 Nos ( Each consisting of )33kVIndoorSwitchgear Panel consisting of Breaker-1250A, 25kA draw out type having following accessories .a. 230VAC Spring Charge Motor.b.110VDC Closing Coil.c.110VDC Shunt Trip Coil.d. Current Transformer Indoor Single Phase Resin Cast Ratio: 400-200/5+5 Core-1: 15VA Class 0.5, Core -2 5P20 - 3nos.e. Potential Transformer Draw out Type Resin cast Ratio : 33KV/√3/110V/√3100VA, CLASS: 0.5-3 Nos.f.12 Window Annunciator.g.Digital Ammeter with ASS.h.Digital Voltmeter with VSS.i.Multifunction Load Manager Class 0.5 with RS485 & Ethernet communication.j.Master Trip Relay, TCS Relay , TNC Lockable Type, Manual/Remote Selector Swithc etc.,k. Numerical Protection IEC 61850 Draw out Relay with Graphical display- 1nowith Three Phase O/C & E/F (50, 51, 50N, 51N, 50G, 51G),Three Phase Directional O/C & E/F (67/67N), Negative Phase Sequence O/C (46) ,Inrush Detection (68), Circuit Breaker Failure Protection (50BF), Broken Conductor (46BC), Three Phase O/V, U/V & NDR (27, 59, 59N) ,Thermal Overload (49),Negative Sequence Overvoltage (47) ,Reverse Power (32),Over Frequency (81O), Under Frequency (81U), CT Supervision (60 CTS) ,VT Fuse Failure (60 VTS) and 64 (Restricted earth fault) Relay shall have 8 DI and 8 DO. Makes: ABB/CG/Schneider/Siemens. 108 B. OUTGOING - 4 Nos ( Each consisting of )33kVIndoorSwitchgear Panel consisting of Breaker-1250A, 25kA draw out type having following accessories for Transformer Outgoing.a. 230VAC Spring Charge Motor.b.110VDC Closing Coil.c.110VDC Shunt Trip Coil.d. Current Transformer Indoor Single Phase Resin Cast Ratio: 400-200/5+5+5A Core-1: 15VA Class 0.5, Core -2 5P20, Core -3: Class PS - 3nos.e.12 Window Annunciator.f.Digital Ammeter with ASS.g. Digital Voltmeter with VSS.h. Multifunction Load Manager Class 0.5 with RS485 & Ethernet communication.i. Master Trip Relay, TCS Relay , TNC Lockable Type, Manual/Remote Selector Swithc etc.,j. Numerical Protection IEC 61850 Draw out Relay with Graphical display- 1nowith Three Phase O/C & E/F (50, 51, 50N, 51N, 50G, 51G),Three Phase Directional O/C & E/F (67/67N), Negative Phase Sequence O/C (46) ,Inrush Detection (68), Circuit Breaker Failure Protection (50BF), Broken Conductor (46BC), Three Phase O/V, U/V & NDR (27, 59, 59N) ,Thermal Overload (49),Negative Sequence Overvoltage (47) ,Reverse Power (32),Over Frequency (81O), Under Frequency (81U), CT Supervision (60 CTS) ,VT Fuse Failure (60 VTS),Transformer Differential Protecton (except Stn Transformer )64 (Restricted earth fault) Relay shall have 8 DI and 8 DO. Makes: ABB/CG/Schneider/Siemens. 109 C. BUSCOUPLER- 1 Nos ( Each consisting of )33kVIndoorSwitchgear Panel consisting of Breaker-1250A, 25kA draw out type having following accessories for Transformer Outgoing.a. 230VAC Spring Charge Motor.b.110VDC Closing Coil.c.110VDC Shunt Trip Coil.d. Master Trip Relay, TCS Relay , TNC Lockable Type, Manual/Remote Selector Swithc etc.,e. Electrical & Mechanical Interlocking.f. Numerical Protection Relay.g. ABT scheme with Manual Option.Note:The above said panelsEarthing truck -01 nos. Separate earthing truckfor bus earthing & cable earthing. Earthing truck shall be so designed that it is impossible to earth alive. It shall be provided with capacitive voltage detection with audio visual annunciation.Technical drgs of the VCB panel submitted by the contractor is required to be approved by the accepting officer before taking procurement action and the VCB panel to be inspected by the rep of accepting officer at Factory premises as per IS before despatch. Pre-commissioning inspection of VCB panel shall be carried out by Senior Electrical Inspector / Electrical Inspector. The VCB panel should be GSM based SCADA compatible. 110 Supply, Installation, testing & commissioning ofHT 11KV, 25 kA, VCB line of Nine panels switchboard consisting of 1250 Amps, VCB 11 KV - 02 Nos as Incomer, Bus coupler 1250Amps VCB 11 KV -1Nos , Outoing 1250AVCB 11 KV- 6 Nos.VCB panel indoortype totally enclosed, free standing floor mounting type, compartment based with truck mounted vacuum circuit breaker spring operated electrically and manually charged operating mechanism suitable for horizontalisolation, horizontal draw out type VCBs with copper bus bars, Self supported Insulated Busbar with full voltage rated should be used. The switchgear panel shall be of sheet steel constructionnot less than 2.5mm thickness for load bearing section and not less than 2 mm thickness for non-load bearing and shall totally dust and vermin proof. Complete VCB panel confirming to IEC 62271-200 standards and IP 4X class of protection comprising necessary bus-bars extension and connections and following protective and control devices as specified below. Circuit Breaker shall be suitable for E2, M2, C2duty. The manufacturer of circuit breaker & Panel shall also be the manufacturer of the Vacuum Interrupter, Relay. The switchgear and control gear panels shall be of the fully arc proof for 25 kA for 1Sec AFLR complete Make: ABB /CG / Schneider / Siemens. 111 A. INCOMER-2 Nos ( Each consisting of )11kVIndoorSwitchgear Panel consisting of Breaker-1250A, 25kA draw out type having following accessories:-a. 230VAC Spring Charge Motor.b.110VDC Closing Coil.c.110VDC Shunt Trip Coil.d. Current Transformer Indoor Single Phase Resin Cast Ratio: 800-600-400/5+5+5A Core-1: 15VA Class 0.5, Core -2 5P20, Core -3: Class PS - 3nos.e. Potential Transformer Draw out Type Resin cast Ratio : 11KV/√3/110V/√3100VA, CLASS: 0.5-3 Nos.f.12 Window Annunciator.g.Digital Ammeter with ASS.h.Digital Voltmeter with VSS.i.Multifunction Load Manager Class 0.5 with RS485 & Ethernet communication.j.Master Trip Relay, TCS Relay , TNC Lockable Type, Manual/Remote Selector Swithc etc.,l. Numerical Protection IEC 61850 Draw out Relay with Graphical display- 1nowith Three Phase O/C & E/F (50, 51, 50N, 51N, 50G, 51G),Three Phase Directional O/C & E/F (67/67N), Negative Phase Sequence O/C (46) ,Inrush Detection (68), Circuit Breaker Failure Protection (50BF), Broken Conductor (46BC), Three Phase O/V, U/V & NDR (27, 59, 59N) ,Thermal Overload (49),Negative Sequence Overvoltage (47) ,Reverse Power (32),Over Frequency (81O), Under Frequency (81U), CT Supervision (60 CTS) ,VT Fuse Failure (60 VTS),Relay shall have 8 DI and 8 DO. Makes: ABB/CG/Schneider/Siemens. 112 B. OUTGOING - 6 Nos ( Each consisting of )11kVIndoorSwitchgear Panel consisting of Breaker-1250A, 25kA draw out type having following accessories for Transformer Outgoing.a. 230VAC Spring Charge Motor.b.110VDC Closing Coil.c.110VDC Shunt Trip Coil.d. Current Transformer Indoor Single Phase Resin Cast Ratio: 400-300-200/5-5A Core-1: 15VA Class 0.5, Core -2 5P20 - 3 nos.e.12 Window Annunciator.f.Digital Ammeter with ASS.g. Digital Voltmeter with VSS.h. Multifunction Load Manager Class 0.5 with RS485 & Ethernet communication.i. Master Trip Relay, TCS Relay , TNC Lockable Type, Manual/Remote Selector Swithc etc.,j. Numerical Protection IEC 61850 Draw out Relay with Graphical display- 1nowith Three Phase O/C & E/F (50, 51, 50N, 51N, 50G, 51G),Three Phase Directional O/C & E/F (67/67N), Negative Phase Sequence O/C (46) ,Inrush Detection (68), Circuit Breaker Failure Protection (50BF), Broken Conductor (46BC), Three Phase O/V, U/V & NDR (27, 59, 59N) ,Thermal Overload (49),Negative Sequence Overvoltage (47) ,Reverse Power (32),Over Frequency (81O), Under Frequency (81U), CT Supervision (60 CTS) ,VT Fuse Failure (60 VTS).Relay shall have 8 DI and 8 DO. Makes: ABB/CG/Schneider/Siemens. 113 C. BUSCOUPLER- 1 Nos ( Each consisting of )11kVIndoorSwitchgear Panel consisting of Breaker-1250A, 25kA draw out type having following accessories for Transformer Outgoing.a. 230VAC Spring Charge Motor.b.110VDC Closing Coil.c.110VDC Shunt Trip Coil.d. Master Trip Relay, TCS Relay , TNC Lockable Type, Manual/Remote Selector Swithc etc.,e. Electrical & Mechanical Interlocking, ABT scheme with Manual option.Note: The above said panelsEarthing truck -02 nos. Separate earthing truckfor bus earthing & cable earthing. Earthing truck shall be so designed that it is impossible to earth alive. It shall be provided with capacitive voltage detection with audio visual annunciation. Technical drgs of the VCB panel submitted by the contractor is required to be approved by the accepting officer before taking procurement action and the VCB panelto be inspected by rep of the accepting officer at Factory premises as per IS before despatch. Pre-commissioning inspection of VCB panelshall be carried out by Senior Electrical Inspector / Electrical Inspector. The VCB panel should be GSM based SCADA compatible. 114 Supply, install, test and commission of APFC panel indoor type 1500 KVAR 12.1 KV, complete Make : CG / Shreem /Siemens /BCH.Capacitor panel consisting of below:-83.33 KVAR, 6.98 KV, externally fused capacitor unit for 250K @12.1KV (207K 11KV) step - 12nos.166.67 KVAR, 6.98 KV, externally fused capacitor unit for 500K @12.11 KV (413K 11KV) step - 3nos.11 KV, Air core dry type, class F aluminium wound, 1Ph, 0.2%, series reactor (STC shall be 16.6 times rated current for 2 sec) - 15nos.11KV, 400A, 10KA for 1 Sec, 3 phase vacuum contactor - 15nos.11 KV/110V-190V, 50-50VA, 3Ф resin cast RVT - 1no.11 KV HT HRC fuses of suitable current rating- 15nos.11 KV, 630Amp, 25KA for 1 sec, off load type isolator- 1no.3PH, RC surge suppressor- 1no.APFC relay (RS485/232 communication port)- 1no.Control cable, space heater, timer, thermostat, CFL lamp, LED indication, push button, selector switch, terminal connectors, gasket, limit switch, name plate, hardware - 1 set. 115 S& F spring loaded aluminium clamps suitable for HV & EHV cables of following sizes inculding all necessary items to fix such as nuts, bolts, washers etc. and all fixing arrangements as required at site. 116 Single core 630 Sqmm 132 KV Al cable 117 Three core 300 Sqmm 33 KV Al cable 118 M & L for survey, site inspection, layout design and location identification for complete earthing/earth mat layouting for best result depending on the soil condition at the site of 132KV and 33 KV yard all complete as specified and directed. Survey report alongwith layout drawing in A3 size properly verified by a Engineer to be submitted in triplicate for approval of Engr in charge/GE 119 Material and labour for brick massonary in cement mortar 1:4 of internal size 1000 x 1000 x 800mm for man hole in contol/power cable routes including plastering with cement mortar 1:6 10MM thick internally and externally 150mm below the G.L. with 1:6 cement mortar 15mm thick,PCC 1:4:8type D2 by using 40mm gradded aggregate foundation of size 1550x1550 mm of 150mm thick and PCC 1:3:6 for coping of 50mm thick and covering the chamber with 40X40X4 mm thick angle iron frame and 10mm thick RCC slab with type B0 1:2:4 concrete with 12.5mm graded aggregate as cover with handles made out of MS round bar 10 mm dia for lifting slabs including painting to the angle iron with two coats of synthetic enamel paint over a coat of redoxide primer and white wash for the man hole complete all as directed by Engineer-in-charge. 120 Material and labour for brick massonary in cement mortar 1:4 of internal size 1500 x 1500 x 1400mm for man hole in control cable routes including plastering with cement mortar 1:6 10MM thick internally and externally 150mm below the G.L. with 1:6 cement mortar 15mm thick,PCC 1:4:8type D2 by using 40mm gradded aggregate foundation of size 1550x1550 mm of 150mm thick and PCC 1:3:6 for coping of 50mm thick and covering the chamber with 40X40X4 mm thick angle iron frame and 10mm thick RCC slab with type B0 1:2:4 concrete with 12.5mm graded aggregate as cover with handles made out of MS round bar 10 mm dia for lifting slabs including painting to the angle iron with two coats of synthetic enamel paint over a coat of redoxide primer and white wash for the man hole complete all as directed by Engineer-in-charge. 121 M&L for Providing precastreinforced cement concrete slabs 12.5 cm thick M-30 including reinforcementand 12 mm dia MS handle (with plain or interlocking joints as directed setting in mortar 1:6 of size of slab 1.20x1.20M. 122 LIGHTENING PROTECTION 123 M & L for single pointed Air termination Aluminium Rod 12 mm dia 500 mm long with Aluminium base plate of size 125 x 125 x 10mm fixed over hylam sheet of size 175 x 175 x 10mm and fixed on 1.5 Meter GI pipe 25mm Medium grade on roof all specified and as directed. 124 M & L Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth strip 32 x 6 mm as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge.Note: 1.The above quoted rate shall include cost of main earthing lead of 32 x 6mm GI earth strip, charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia medium grade GIwater pipe including GI protection pipe 40mm dia light grade for earth strip etc., 2. The cost of earth pit is deemed to be included in the unit rate. 125 AC & REF 126 Supply and install split AC units indoor/outdoorof capacity 2 TR, 3 star , Inverter type, single phase complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with copper condenser complete all as specified and directed 127 S& F Voltage Stabiliser 5 KVA, operating voltage range 130-290 Volt, Single phase complete all as specified and directed. 128 SCHEDULE A PART-IXPHASE -II Outsourcing for sub station for the First 11 Monthsduring Defect Liability Period . 129 Outsourcing for manning and operationof HT/LT Electrical sub station at 33/11 KV substation at NSB along with connected equipments installed round the clock (in 03 shifts) of each shift of 08 hours per day including Sunday and holidays complete all as specified and as directed. 130 One skilled operator in each shift 131 One semi skilled operator in each shift 132 SCHEDULE A PART-XPHASE -III Outsourcing for sub station for the Second 11 Monthsduring Defect Liability Period . 133 Outsourcing for manning and operationof HT/LT Electrical sub station at 33/11 KV substation at NSB along with connected equipments installed round the clock (in 03 shifts) of each shift of 08 hours per day including Sunday and holidays complete all as specified and as directed. 134 One skilled operator in each shift 135 One semi skilled operator in each shift 136 SCHEDULE A PART-XIPHASE -IV Outsourcing for sub station for the balance 02 Months after 22 months during Defect Liability Period . 137 Outsourcing for manning and operationof HT/LT Electrical sub station at 33/11 KV substation at NSB along with connected equipments installed round the clock (in 03 shifts) of each shift of 08 hours per day including Sunday and holidays complete all as specified and as directed. 138 One skilled operator in each shift 139 One semi skilled operator in each shift 140 Note for Item No. 127 to 138:-The rate shall include the following[i] For operation of all out door and indoor structures in the same area.[ii] Contractor shall laise with Dolphin hill sub station in case of major breakdown for early restoration of supply.[iii] In case any problem occurs which seems not under thecontrol of the operator, the same shall be immediately intimated to JE/ AGE E/M.[iv] Any additional man power required for early restoration of supply in case of emergency shall be provided by the contractor.[v] The contractor shall abide by the latest labour rules and minimum wages Act. Wages paid by the contractor to the emplopyed persons shall not be less than minimum wages fixed by the state/ central Govt from time to time whichever is higher.[vi] The contractor shall also insure the workmen employed on th job.[vii] The contractor is responsible for insurance, EPF, ESI, labour welfare cess etc., as applicable and shall be paid to the workmen as per existing Rules/ Acts/ regulations etc., and quoted is deemed to include the same. 141 SCHEDULE A PART-XIIPHASE -VOutsourcing for SCADA system for the First Year after Defect Liability Period . 142 Operation and comprehensive maintenace without manning of SCADA system including cost of spares post defect liability period operation including payment of bills by telecom service provider (Contractor to provide monthwise break down details of the same) complete all as specified and as directed. 143 SCHEDULE A PART-XIIIPHASE -VIOutsourcing for SCADA system for the Second Year after Defect Liability Period . 144 Operation and comprehensive maintenace without manning of SCADA system including cost of spares post defect liability period operation including payment of bills by telecom service provider (Contractor to provide monthwise break down details of the same) complete all as specified and as directed. 145 SCHEDULE A PART-XIVPHASE -VIIOutsourcing for SCADA system for the Third Year after Defect Liability Period . 146 Operation and comprehensive maintenace without manning of SCADA system including cost of spares post defect liability period operation including payment of bills by telecom service provider (Contractor to provide monthwise break down details of the same) complete all as specified and as directed. 147 SCHEDULE A PART-XVPHASE -VIIIOutsourcing for SCADA system for the Fourth Year after Defect Liability Period . 148 Operation and comprehensive maintenace without manning of SCADA system including cost of spares post defect liability period operation including payment of bills by telecom service provider (Contractor to provide monthwise break down details of the same) complete all as specified and as directed. 149 SCHEDULE A PART-XVIPHASE -IXOutsourcing for SCADA system for the Fifth year after Defect Liability Period . 150 Operation and comprehensive maintenace without manning of SCADA system including cost of spares post defect liability period operation including payment of bills by telecom service provider (Contractor to provide monthwise break down details of the same) complete all as specified and as directed. 151 SCHEDULE A PART-XVIIPHASE -XOutsourcing for SCADA system for the Sixth year after Defect Liability Period . 152 Operation and comprehensive maintenace without manning of SCADA system including cost of spares post defect liability period operation including payment of bills by telecom service provider (Contractor to provide monthwise break down details of the same) complete all as specified and as directed. 153 SCHEDULE A PART-XVIIIPHASE -XIOutsourcing for SCADA system for the Seventh year after Defect Liability Period . 154 Operation and comprehensive maintenace without manning of SCADA system including cost of spares post defect liability period operation including payment of bills by telecom service provider (Contractor to provide monthwise break down details of the same) complete all as specified and as directed. 155 SCHEDULE A PART-XIXPHASE -XIIOutsourcing for SCADA system for the Eighth year after Defect Liability Period . 156 Operation and comprehensive maintenace without manning of SCADA system including cost of spares post defect liability period operation including payment of bills by telecom service provider (Contractor to provide monthwise break down details of the same) complete all as specified and as directed. 157 Note for Item No. 140 to 155 [i] Cost of all minor spares/ components including OFC cables, Ethernet switches, connectors etc., is deemed to be included in quoted rate and any type of extra charge will not be made by Dept.[ii] All major defective spares shall be replaced by contractor on exchange basis which is deemed to be included in the unit price.[iii] All periodical tests of all safety devices in accordance with relavant safety standards with full oad testing will be borne by the contractor.[iv] Systematically examine & repair all the components such as software, monitors, servers etc., if any defect found,[v] All required special tools to be arranged by the contractor.[vi] Contractor shall be responsible for maintaining adequate lighting, cooling and moisture control, ventilation as required all at site complete.[vii] All safety measures/ directions and required tests for safety devices annually shall be borne by contractor.[viii] All periodical visits and all breakdown calls related to stoppage, malfunction, special services should be attended compulsory during all days including sundays & holidays.[ix] The contractor shall be liable to pay the telecom bill provided by the service provider.
Contract Date: Jan 06, 2026 Contract Value : ₹ 23.55 Crore
Statutory Bodies & Commissions/Committees No of Bidders 7
Andhra Pradesh View Result →
27.
Health and Family Welfare #9793770 AOC
tender for Machinery and furniture required for the training of second-year MBBS students in the newly established Government Medical College.” 1. Govt. Medical College, Bhandara (Machinery and Furniture)2. Govt. Medical College, Jalna (Machinery and Furniture)3. Govt. Medical College, Buldhana (Machinery)4. Govt. Medical College, Hingoli (Machinery)5. Govt. Medical College, Washim (Machinery and Furniture)6. Govt. Medical College, Nashik (Machinery and Furniture)7. Govt. Medical College, Amravati (Machinery)8. Govt. Medical College, Gadchiroli (Machinery)-1 Office Tabel OT 6 (size 6X2X2.75) 2 Revolving Executive chair 3 Visitore Chair 4 Store well Cupboard ( size : 6.5X2.75X1.5) 5 Computer table (size: 5x2) 6 Wating bench 3 seter SS(Size L54W20H18) 7 Horizontal Book case ( Size : 6 X2.5X1.5) 8 Office Tabel Executive (Size 5X2X2.75) 9 Revolving Executive chair 10 Visitor Chair 11 Store well cupboard ( Size : 6.5X2.75X1.5) 12 Horizontal Book case ( Size : 6 X2.5X1.5) 13 Office Tabel Executive (size 5X2X2.75) 14 Revolving Executive chair 15 Visitor Chair 16 Store well Cupboard ( Size : 6.5X2.75X1.5) 17 Office Tabel Executive (size 5X2X2.75) 18 Visitor Chair 1+9 6 shelves Specimen rack ( Size : 6 X2.75X1.5) 20 Library study table Size(6x5) 21 Libirary book rak 22 Visitor Chair 23 Book case ( Size:6 X2.5X1.5) 24 Executive Table (size 4X2X2.75) 25 Visitor Chair 26 Store Well cupboard ( Size : 6.5X2.75X1.5) 27 Computer Table (size 5x2) 28 Study chair writing pad 29 Executive Table (size 4X2X2.75) 30 Visitor Chair 31 Podium (size 4.5x2.5) SN Name Of Furniture Item 1 Office Tabel OT 6 (size 6X2X2.75) 2 Revolving Executive chair 3 Visitor Chair 4 Office cupboard ( size : 6X2.75X1.5) 5 Computer table (size: 5x2) 6 Wating bench 3 seter SS (Size L54W20H18) 7 Office Tabel Executive (Size 5X2X2.75) 8 Revolving Executive chair 9 Visitor Chair 10 Store well Cupboard ( Size : 6.5X2.75X1.5) 11 Vertical Book case ( Size : 6 X2.5X1.5) 12 Office Tabel Executive (size 5X2X2.75) 13 Revolving Executive chair 14 Visitor Chair 15 Office cupboard (Size 6X2.75X1.5) 16 Office Tabel Executive (size 5X2X2.75) 17 Visitor Chair 18 Office cupboard ( Size : 6X2.75X1.5) 19 6 shelves Specimen rack ( Size : 6 X2.75X1.5) 20 Library study table Size(6x5) 21 Library book rack 22 Visitor Chair 23 Vertical Book case ( Size:6 X2.5X1.5) 24 Executive Table (size 4X2X2.75) 25 Visitor Chair 26 Store well Cupboard ( Size : 6.5X2.75X1.5) 27 Computer Table (size 5x2) 28 Student chair with cushion writing pad 29 Executive Table (size 4X2X2.75) 30 Visitor Chair 31 Podium (size 4.5x2.5) 32 Laboratory table with Shink size :-10x3.5x30 33 Table Laboratory with Shink Size :- 9x3.5x30 34 Revolving Stool (Size :L20 W24H18- 25) 35 Executive Table (size 4X2X2.75) 36 Visitor Chair 37 Office cupboard ( Size : 6X2.75X1.5) 38 Square stool SS (Size L14 W14H18) 39 Executive Table (size 4X2X2.75) 40 Visitor Chair 41 6 sheleves Specimen rack (Size :-6x3x1.4) 42 Store well cupboard ( Size : 6.5X2.75X1.5) 43 Square stool SS (Size L14 W14H18) 44 Executive Table (size 4X2X2.75) 45 Visitor Chair 46 6 shelves Specimen rack (Size :-6x3x1.4) 47 Store well cupboard ( Size : 6.5X2.75X1.5) 48 Square stool SS (Size L14 W14H18) 49 Executive Table (size 4X2X2.75) 50 Visitor Chair 51 6 shelves Specimen rack (Size :-6x3x1.4) SN Name Of Furniture Item 1 Office Tabel OT 6 (size 6X2X2.75) 2 Super Executive chair 3 S Type Chair 4 Store well cupboard (size : 6.5X2.75X1.5) 5 Computer table (size: 5x2) 6 Waiting bench 3 seter SS (Size L54W20H18) 7 Vertical Book case ( Size : 6 X2.5X1.5) 8 Office Tabel Executive (Size 5X2X2.75) 9 Super Executive chair 10 S Type Chair 11 Store well cupboard ( Size : 6.5X2.75X1.5) 12 Vertical Book case ( Size : 6 X2.5X1.5 13 Office Tabel Executive (size 5X2X2.75) 14 Super Exectuive chair 15 S Type Chair 16 Store well cupboard ( Size : 6.5X2.75X1.5) 17 Office Tabel Exectuive (size 5X2X2.75) 18 S Type Chair 19 Glass door cupboard Size (5*3) 20 Small Box Trey with Glass Top 21 6 sheleves Specimen rack (Size : 6 X2.75X1.5) 22 Library study table Size(6x5) 23 Libirary book rak 24 S Type Chair 25 Horizontal Book case ( Size:6 X2.5X1.5) 26 Executive Table (size 4X2X2.75) 27 S Type Chair 28 Store well cupboard ( Size : 6.5X2.75X1.5 29 Computer Table (size 5x2) 30 Student chair writing pad 31 Executive Table (size 4X2X2.75) 32 S Type Chair 33 Podium (size 4.5x2.5) 34 Table Laboratory with Shink 35 Square spring stool size( L20 W24H18-25) 36 Executive table (Size 5X2X2.75) 37 Visitors chairs 38 Office cupboard ( Size : 6.5X2.75X1.5) 39 Square stool size( L20 W24H18-25) 40 Executive table (Size 5X2X2.75) 41 Visitors chairs 42 Office cupboard ( Size : 6.5X2.75X1.5) 43 Square stool size( L20 W24H18-25) 44 Executive table (Size 4X2X2.75) 45 Visitors chairs SN Name Of Furniture Item 1 Office Tabel OT6 (size 6X2X2.75) 2 Super Exectuive chair 3 S Type Chair 4 Office cupboard ( size : 6X2.75X1.5) 5 Computer table (size: 5x2) 6 Wating bench 3 seter SS (Size L54W20H18) 7 Office Tabel Exectuive (Size 5X2X2.75) 8 Super Executive chair 9 S Type Chair10 Office cupboard ( Size : 6X2.75X1.5) 11 Horizontal Book case ( Size : 6 X2.5X1.5) 12 Office Tabel Exectuive (size 5X2X2.75) 13 Super Exectuive chair 14 S Type Chair 15 Office cupboard ( Size : 6X2.75X1.5) 16 Office Tabel Exectuive (size 5X2X2.75) 17 S Type Chair 18 Glass door cupboard Size (5*3) 19 Small Box Trey with Glass Top 20 6 sheleves Specimen rack ( Size : 6 X2.75X1.5) 21 Library study table Size(6x5) 22 Library book rack 23 S Type Chair 24 Horizontal Book case ( Size:6 X2.5X1.5) 25 Executive Table (size 4X2X2.75) 26 S Type Chair 27 Office cupboard ( Size : 6.5X2.75X1.5) 28 Computer Table (size 5x2) 29 Chair with cushion writing pad 30 Executive Table (size 4X2X2.75) 31 S Type Chair 32 Podium (size 4.5x2.5) 33 Lab work station Table with shink 34 Revolving Stool (Size :L20 W24H18- 25) 35 Lab Work Station table with shink 36 Height adjustable top round Lab Chair 1 Office Tabel OT6 (size 6X2X2.75) 2 Super Exectuive chair 3 Steel Tubular S type Chair 4 Office cupboard ( size : 6X2.75X1.5) 5 Computer table (size: 5x2) 6 Wating bench 3 seter SS (Size L54W20H18) 7 Office Tabel Exectuive (Size 5X2X2.75) 8 Super Executive chair 9 Steel Tubular S type Chair 10 Office cupboard ( Size : 6X2.75X1.5) 11 Horizontal Book case ( Size : 6 X2.5X1.5) 12 Office Tabel Exectuive (size 5X2X2.75) 13 Super Executive chair 14 Steel Tubular S type Chair 15 Office cupboard ( Size : 6X2.75X1.5) 16 Office Tabel Exectuive (size 5X2X2.75) 17 Steel Tubular S type chair 18 Glass door cupboard Size (5*3) 19 6 sheleves Specimen rack ( Size : 6 X2.75X1.5) 20 Library study table Size(6x5) 21 Library book rack 22 Steel Tubular S type Chair 23 Horizontal Book case ( Size:6 X2.5X1.5) 24 Office Table executive (size 4X2X2.75) 25 Steel Tubular S type Chair 26 Office cupboard ( Size : 6X2.75X1.5) 27 Computer Table (size 5x2) 28 Writing Pad chair 29 Executive Table (size 4X2X2.75) 30 Steel Tubular S type Chair 31 Podium (size 4.5x2.5) 1 Hydrometers, milk 2 Electric Incubator 3 Balance for weighting food stuff 4 Clinical Centrifuge 5 Weighing machine adult 6 Salters baby weighing machine 7 Harpenden calipers (for skinfold thickness) 8 Harpenden calipers (for skinfold thickness) 9 Height measuring stand 10 Refrigerator 1 cubic feet 11 Iced Lined Refrigerator 12 Smart TV 13 Multimedia Projector with screen 14 Public Address system for field based activities and one each for RHTC &UHTC 15 Chloroscope 16 Horrock’s Apparatus 17 MUAC tapes 18 Hemoglobin meter 19 BP Apparatus (Digital) 20 Stethoscope 21 Sound level meter 22 Water sampling bottle 23 Needle Shredder 24 Vaccine carrier 25 Craft water testing kit 26 Treatment kits as per national health programs 27 Iodine testing kit 28 Glucometer 29 Mosquito catching kit 30 Clinical Thermometer 31 First Aid Kit 32 Otoscope 33 Computer with printer, scanner and photocopier and internet facility 34 Maglite white board size(3x4) 35 Maglite white board size(4x5) 36 Interactive board 37 Public addresses system speaker SN Name Of the Instrument 1 Special Drug Delivery systems like Metered Dose Inhalers, Spacers, Rota halers, Nasal sprays, Transdermal patches, Insulin infusion pumps, Insulin pen etc. 2 Manikins for demonstration of intravenous injection, enema, local, intramuscular injections, intracardiac injection and other routes of drug administration (10 sets) 3 Computer assisted Learning Laboratory for Pharmacology. 3 Computer with printer 4 Projector led SN Name Of Furniture Item 1 Anthropometric Set including 2 Digital pH Meter 3 Digital Spectrophotometer 4 Chemical Balance 5 Distillation Plant 6 Refrigerator 7 Centrifuge 8 Slide Warming Table 9 Hot Plate 10 Spectroscopic Lens With Adjustable Slit 11 Dissection Set Complete 12 Digital BP Instrument 13 Stethoscope 14 Cold Storage For Dead Bodies 15 Weighing Machine For Dead Bodies 16 Autopsy Tables 17 Stryker Type Autopsy Saw With Accessories 18 Weighing Machine For Organs 19 Weighing Machine For Fetus 20 Brain Knife 21 Hack Saw 22 Rib Shear Left & Right 23 Measuring Tape( Steel Tape Roll) 24 Magnifying Lens 25 X- Ray View Box (4 In 1) 26 Tooth Extractor Left & Right 27 Hand Set Heat Sealer 28 Instrument Trolley 29 Rectal Thermometer 30 Portable X-ray Machine (can be shared with Radiology Department) 31 Computer 32 Printer 33 Video Conferencing Room (In the Department to give evidence in the court of law to meet requirement of Digital India) 1 CYTOSPIN 2 For Student- LED Binocular 3 Stop Watch Reading at 1/5 Second 4 Haemo-Cytometers with red and white Pipettes 5 Staining Jars for Slides 6 Urinometers (Mercury based Instruments to be replaced with other alternatives) 7 Centrifuge Tube Graduated 8 Graduated Cylinders for various capacities ranging from 100cc to 1000cc (for Student) 9 Pipettes of various size with disposal tips. (For Student) 10 Reagent Bottles (For Student) 11 Dropping Bottles (For Student) 12 Manual Rotary Microtome 13 Automated Rotary Microtome 14 Cryostat 15 Hot plate 16 Paraffin embedding bath 17 Heated Paraffin Embedding Module 18 Automated Tissue Processor –Histokinette 19 Autoclave 20 Ultrapure water solutions - Distilled water plant 21 Water bath 22 Centrifuge machine 23 Digital SLR at least 20 megapixel with micro, macro, wide angle zoom lenses, Flash and other accessories 24 Digital Automatic camera > 5 megapixel 25 Fully Automated high throughput Multi-Stainer- Workstation 26 Fully Automated Embedding System (Heated embedding module & cold plate) 27 Stand alone cold plate 28 Single Pan Digital Balance, Chemical 29 Balance, chemical with weights 30 RESEARCH MICROSCOPE 31 Grossing Station - Stainless steel, with Control panel, air filtration system, computer arm with articulation, LED lights Alongwith Computer 32 Five part Fully Automated Cell Counter 33 Three Part Fully Automated Cell Counter 34 Coagulometer (Fully Automated) 35 Coagulometer (semi ) 36 Magnetic board with stand 3x4 37 Magnetic board with stand 4x5 38 Computer printer 39 LED Screen 65 inch 40 Sprint lamp 41 A L I S A Reader and washer 42 Nadel destroyer 43 Mosquito catching kit low and 44 Lap top 45 Hot air oven pathology SN Name Of instrument Item 1 Microscope Binocular (Students)2 Culture Plates/Petri Dishes 3 Glass wear 4 Facility for Heating Slides (Slide Warming Table) 5 Anaerobic apparatus 6 Autoclave 7 Balance Electronic Digital 8 Biosafety Cabinet Type - 2A 9 BOD Incubator 10 Centrifuge 11 CO2 Incubator/Candle Jar 12 Candle Jar 13 Computer Unit 14 Deep Freeze -20° C & Deep Freezer 15 Distilled water Plant 16 Elisa Reader 17 Elisa Washer 18 Hot Air Oven 19 Incubator 20 Lab Refrigerator (minimum 400 litres) 21 Laminar flow 22 Micrometre eye pieces 23 Micrometre stage 24 Microscope Binocular 25 Microscope with universal condenser containing oil immersion, Bright field, Phase 26 pH determination apparatus 27 Serum inspissators 28 VDRL shaker 29 Vortex Mixer 30 Water bath with variable temperature 31 Oil-immersion lens for student microscope 32 Colony Counter 33 Micropipettes – Multi channel & Single channel 34 Digital Thermometers of different temperatures 35 -80°C deep freezer with UPS 36 Real-time PCR machine calibrated for the fluorophore dyes with UPS (2 nos., 2KVA each, with hours back-up) 37 Micro centrifuge / Refrigerated Centrifuge 38 (a) Personal protective equipment (PPE) 39 Magnifying Glass with metal Handle 40 Phase Contact Microscopes 41 VORTEX SHAKER 42 Electronic Balance 43 TRINOCULAR FLOURESCENT MICROSCOPE 44 LCD PROJECTER 45 Laptop 46 Slide box 100 packet 47 Converse slip18x18 48 Cavite Salid box 49 Test tube 18x150mm 50 Test tube 15x125mm 51 Test tube 12x125mm 52 Discarding glass jar 53 Microbiology museum models 54 Microbiology chart for museum 55 Sprit Lamp 56 Colony Counter 57 Magnetic board with stand (3x4) 1 Office Tabel OT 6 (size 6X2X2.75) 2 Revolving Executive chair 3 Visitore Chair 4 Store well Cupboard ( size : 6.5X2.75X1.5) 5 Computer table (size: 5x2) 6 Wating bench 3 seter SS(Size L54W20H18) 7 Horizontal Book case ( Size : 6 X2.5X1.5) 8 Office TabelExectuive (Size 5X2X2.75) 9 Revolving Executive chair 10 Visitor Chair 11 Store well cupboard ( Size : 6.5X2.75X1.5) 12 Horizontal Book case ( Size : 6 X2.5X1.5) 13 Office Tabel Executive (size 5X2X2.75) 14 Revolving Executive chair 15 Visitor Chair 16 Store well Cupboard ( Size : 6.5X2.75X1.5) 17 Office TabelExectuive (size 5X2X2.75) 18 Visitor Chair 19 6 sheleves Specimen rack ( Size : 6 X2.75X1.5) 20 Library study table Size(6x5) 21 Libirary book rak 22 Visitor Chair 23 Book case ( Size:6 X2.5X1.5) 24 Office Table executive (size 4X2X2.75) 25 Visitor Chair 26 Store Well cupboard ( Size : 6.5X2.75X1.5) 27 Computer Table (size 5x2) 28 Study chair writing pad 29 Executive Table (size 4X2X2.75) 30 Visitor Chair 31 Podium (size 4.5x2.5) 32 Laboratory table with shink 33 Table Laboratory with Shink 34 Modular table 35 Lab display table 36 Display table 37 Display stand 38 Sqare spring stool 39 Executive table Size (4x2x2.5) 40 Visitors chairs SN Name Of Furniture Item 1 Office Tabel OT 6 (size 6X2X2.75) 2 Revolving Executive chair 3 Visitor Chair 4 Office cupboard ( size : 6X2.75X1.5) 5 Computer table (size: 5x2) 6 Wating bench 3 seter SS (Size L54W20H18) 7 Office Tabel Executive (Size 5X2X2.75) 8 Revolving Executive chair 9 Visitor Chair 10 Store well Cupboard ( Size : 6.5X2.75X1.5) 11 Vertical Book case ( Size : 6 X2.5X1.5) 12 Office Tabel Executive (size 5X2X2.75) 13 Revolving Executive chair 14 Visitor Chair 15 Office cupboard (Size : 6X2.75X1.5) 16 Office Tabel Executive (size 5X2X2.75) 17 Visitor Chair 18 Office cupboard ( Size : 6X2.75X1.5) 19 6 shelves Specimen rack ( Size : 6 X2.75X1.5) 20 Library study table Size(6x5) 21 Library book rack 22 Visitor Chair 23 Vertical Book case ( Size:6 X2.5X1.5) 24 Executive Table (size 4X2X2.75) 25 Visitor Chair 26 Store well Cupboard ( Size : 6.5X2.75X1.5) 27 Computer Table (size 5x2) 28 Student chair with cushion writing pad 29 Executive Table (size 4X2X2.75) 30 Visitor Chair 31 Podium (size 4.5x2.5) 32 Laboratory table with Shink size :-10x3.5x30 33 Table Laboratory with Shink Size :- 9x3.5x30 34 With shink table lab 35 Square spring Stool (Size :L20 W24H18-25) 36 Executive Table (size 4X2X2.75) 37 Visitor Chair 38 Office cupboard ( Size : 6X2.75X1.5) 39 Square stool SS (Size L14 W14H18) 40 Executive Table (size 4X2X2.75) 41 Visitor Chair 42 6 sheleves Specimen rack (Size :-6x3x1.4) 43 Office cupboard ( Size : 6.5X2.75X1.5) 44 Square stool SS (Size L14 W14H18) 45 Executive Table (size 4X2X2.75) 46 Visitor Chair 47 6 shelves Specimen rack (Size :-6x3x1.4) 48 Store well cupboard ( Size : 6.5X2.75X1.5) 49 Square stool SS (Size L14 W14H18) 50 Executive Table (size 4X2X2.75) 51 Visitor Chair 52 6 shelves Specimen rack (Size :-6x3x1.4) SN Name Of Furniture Item 1 Office Tabel OT 6 (size 6X2X2.75) 2 Super Executive chair 3 S Type Chair 4 Store well cupboard (size : 6.5X2.75X1.5) 5 Computer table (size: 5x2) 6 Waiting bench 3 seter SS (Size L54W20H18) 7 Vertical Book case ( Size:6 X2.5X1.5) 8 Office Tabel Executive (Size 5X2X2.75) 9 Super Executive chair 10 S Type Chair 11 Store well cupboard ( Size : 6.5X2.75X1.5) 12 Vertical Book case ( Size : 6 X2.5X1.5 13 Office Tabel Executive (size 5X2X2.75) 14 Super Exectuive chair 15 S Type Chair 16 Store well cupboard ( Size : 6.5X2.75X1.5) 17 Office Tabel Exectuive (size 5X2X2.75) 18 S Type Chair 19 Glass door cupboard Size (5*3) 20 Small box tray with glass top table (5x3 21 6 shelves Specimen rack ( Size : 6 X2.75X1.5) 22 Library study table Size(6x5) 23 Library book rack 24 S Type Chair 25 Horizontal Book case ( Size:6 X2.5X1.5) 26 Executive Table (size 4X2X2.75) 27 S Type Chair 28 Store well cupboard ( Size : 6.5X2.75X1.5 29 Computer Table (size 5x2) 30 Student chair writing pad 31 Executive Table (size 4X2X2.75) 32 S Type Chair 33 Podium (size 4.5x2.5) 34 Table Laboratory with Shink 35 Square stool 36 Executive table (Size 5X2X2.75) 37 Visitors chairs 38 Office cupboard ( Size : 6.5X2.75X1.5) 39 Square stool 40 Executive table (Size 5X2X2.75) 41 Visitors chairs 42 Table with Shink Size (9x2.5) 43 Office cupboard ( Size : 6.5X2.75X1.5) 44 Square stool 45 Executive table (Size 4X2X2.75) 46 Visitors chairs 47 Table with Shink Size (9x2.5) 48 Office cupboard ( Size : 6.5X2.75X1.5) 49 Square stool 50 Executive table (Size 4X2X2.75) 51 Visitors chairs 52 Table with Shink Size (9x2.5) 1 Office Tabel OT6 (size 6X2X2.75) 2 Super Exectuive chair 3 S Type Chair 4 Office cupboard ( size : 6X2.75X1.5) 5 Computer table (size: 5x2) 6 Wating bench 3 seter SS (Size L54W20H18) 7 Office Tabel Exectuive (Size 5X2X2.75) 8 Super Executive chair 9 S Type Chair 10 Office cupboard ( Size : 6X2.75X1.5) 11 Horizontal Book case ( Size : 6 X2.5X1.5) 12 Office Tabel Exectuive (size 5X2X2.75) 13 Super Exectuive chair 14 S Type Chair 15 Office cupboard ( Size : 6X2.75X1.5) 16 Office Tabel Exectuive (size 5X2X2.75) 17 S Type Chair 18 Glass door cupboard Size (5*3) 19 Small Box Trey with Glass Top 20 6 sheleves Specimen rack ( Size : 6 X2.75X1.5) 21 Library study table Size(6x5) 22 Library book rack 23 S Type Chair 24 Horizontal Book case ( Size:6 X2.5X1.5) 25 Executive Table (size 4X2X2.75) 26 S Type Chair 27 Office cupboard ( Size : 6.5X2.75X1.5) 28 Computer Table (size 5x2) 29 Chair with cushion writing pad 30 Executive Table (size 4X2X2.75) 31 S Type Chair 32 Podium (size 4.5x2.5) 33 Lab work station Table with shink 34 Revolving Stool (Size :L20 W24H18- 25) 35 Lab Work Station table with shink 36 Height adjustable top round Lab Chair SN Name Of Furniture Item 1 Office Tabel OT6 (size 6X2X2.75) 2 Super Exectuive chair 3 Steel Tubular S type Chair 4 Office cupboard ( size : 6X2.75X1.5) 5 Computer table (size: 5x2) 6 Wating bench 3 seter SS (Size L54W20H18) 7 Office Tabel Exectuive (Size 5X2X2.75) 8 Super Executive chair 9 Steel Tubular S type Chair 10 Office cupboard ( Size : 6X2.75X1.5) 11 Horizontal Book case ( Size : 6 X2.5X1.5) 12 Office Tabel Exectuive (size 5X2X2.75) 13 Super Executive chair 14 Steel Tubular S type Chair 15 Office cupboard ( Size : 6X2.75X1.5) 16 Office Tabel Exectuive (size 5X2X2.75) 17 Steel Tubular S type chair 18 Glass door cupboard Size (5*3) 19 6 sheleves Specimen rack ( Size : 6 X2.75X1.5) 20 Library study table Size(6x5) 21 Library book rack 22 Steel Tubular S type Chair 23 Horizontal Book case ( Size:6 X2.5X1.5) 24 Office Table executive (size 4X2X2.75) 25 Steel Tubular S type Chair 26 Office cupboard ( Size : 6X2.75X1.5) 27 Computer Table (size 5x2) 28 Writing Pad chair 29 Executive Table (size 4X2X2.75) 30 Steel Tubular S type Chair 31 Podium (size 4.5x2.5) Government 1 CYTOSPIN 2 For Student- LED Binocular 3 Stop Watch Reading at 1/5 Second 4 Haemo-Cytometers with red and white Pipettes 5 Staining Jars for Slides Clinical 6 Urinometers (Mercury based Instruments to be replaced with other alternatives) 7 Centrifuge Tube Graduated 8 Graduated Cylinders for various capacities ranging from 100cc to 1000cc (for Student) 9 Pipettes of various size with disposal tips. (For Student) 10 Reagent Bottles (For Student) 11 Dropping Bottles (For Student) 12 Manual Rotary Microtome 13 Automated Rotary Microtome 14 Cryostat 15 Hot plate 16 Paraffin embedding bath 17 Heated Paraffin Embedding Module 18 Cold Plate for Modular Tissue Embedding System 19 Automated Tissue Processor –Histokinette 20 Autoclave 21 Ultrapure water solutions - Distilled water plant 22 Water bath 23 Centrifuge machine 24 Digital SLR at least 20 megapixel with micro, macro, wide angle zoom lenses, Flash and other accessories 25 Digital Automatic camera > 5 megapixel 26 Fully Automated high throughput Multi- Stainer-Workstation 27 Fully Automated Embedding System (Heated embedding module & cold plate) 28 Standalone paraffin dispensing module cold plate holding more than 100 cassettes 29 Stand alone cold plate 30 Single Pan Digital Balance, Chemical 31 Balance, chemical with weights 32 For Students – LED Binocular with Scanner, 10X, 40X, & Oil immersion lenses with Battery Backup 33 Grossing Station - Stainless steel, with Control panel, air filtration system, computer arm with articulation, LED lights Alongwith Computer 34 Five part Fully Automated Cell Counter 35 Three Part Fully Automated Cell Counter 36 Coagulometer (Fully Automated) 1 Anthropometric Set including 2 Digital pH Meter 3 Digital Spectrophotometer 4 Chemical Balance 5 Distillation Plant 6 Refrigerator 7 Centrifuge 8 Slide Warming Table 9 Hot Plate 10 Spectroscopic Lens With Adjustable Slit 11 Dissection Set Complete 12 Digital BP Instrument 13 Stethoscope 14 Cold Storage For Dead Bodies 15 Weighing Machine For Dead Bodies 16 Autopsy Tables 17 Stryker Type Autopsy Saw With Accessories 18 Weighing Machine For Organs 19 Weighing Machine For Fetus 20 Brain Knife 21 Hack Saw 22 Rib Shear Left & Right 23 Measuring Tape( Steel Tape Roll) 24 Magnifying Lens 25 X- Ray View Box (4 In 1) 26 Tooth Extractor Left & Right 27 Hand Set Heat Sealer 28 Instrument Trolley 29 Rectal Thermometer 30 Portable X-ray Machine (can be shared with Radiology Department) 31 Computer 32 Printer 33 Video Conferencing Room (In the Department to give evidence in the court of law to meet requirement of Digital India) 1 Microscope Binocular (Students) 2 Culture Plates/Petri Dishes 3 Glass Wares Including Pasteur Pipettes 4 Facility for Heating Slides (Slide Warming Table) 5 Anaerobic apparatus 6 Autoclave 7 Balance Electronic Digital 8 Biosafety Cabinet Type - 2A 9 BOD Incubator 10 Centrifuge 11 CO2 Incubator/Candle 12 Computer Unit 13 Deep Freeze -20° C & Deep Freezer 14 Distilled water Plant 15 Elisa Reader 16 Elisa Washer 17 Hot Air Oven 18 Incubator 19 Lab Refrigerator (minimum 400 litres) 20 Laminar flow 21 Micrometer eye pieces 22 Micrometer stage 23 Microscope Binocular 24 Microscope with universal condenser containing oil immersion, Bright field, Phase 25 pH determination apparatus 26 Serum inspissators 27 VDRL shaker 28 Vortex Mixer 29 Water bath with variable temperature 30 Oil-immersion lens for student microscope 31 Colony Counter Consumables 32 Antibiotic zone scale 33 Micropipettes – Multi channel & Single channel 34 Digital Thermometers of different temperatures 35 -80°C deep freezer with UPS 36 Real-time PCR machine calibrated for the fluorophore dyes with UPS (2 nos., 2KVA each, with hours back-up) 37 Micro centrifuge / Refrigerated Centrifuge 38 (b) Personal protective equipment (PPE) 39 Magnifying Glass with metal Handle 40 Metal Mincing Machine 41 Postmortem instrument Set Complete 42 Suction Pumps 43 Filtration Apparatus Seitz 44 Filter and Millipore Filtereach 45 Desiccators 46 Vacuum Desiccators 47 Apron plastic for postmortem 48 Apron rubber for postmortem 49 Lyophilizer 50 Thermal cycler 51 U.V Trans illuminator with photography 52 Colony counter 53 Cold Storage for dead Bodies 54 Phase Contact Microscopes 55 VORTEX SHAKER 56 Electronic Balance 57 Microfuge 58 TRINOCULAR FLOURESCENT MICROSCOPE 1 Hydrometres, milk 2 Electric Incubator 3 Balance for weighting food stuff 4 Clinical Centrifuge 5 Weighing machine adult 6 Baby weighing machine 7 Salters baby weighing machine 8 Harpenden calipers (for skinfold thickness) 9 Height measuring stand 10 Refrigerator 1 cubic feet 11 Iced Lined Refrigerator 12 Smart TV 13 Multimedia Projector with screen 14 Public Address system for field based activities and one each for RHTC &UHTC 15 Chloroscope 16 Horrock’s Apparatus 17 MUAC tapes 18 Hemoglobin meter 19 BP Apparatus (Digital) 20 Stethoscope 21 Sound level meter 22 Water sampling bottle 23 Needle Shredder 24 Vaccine carrier 25 Craft water testing kit 26 Treatment kits as per national health programs 27 Iodine testing kit 28 Glucometer 29 Mosquito catching kit 30 Clinical Thermometer 31 First Aid Kit 32 Otoscope 1 Microscope Binocular (Students) Culture Plates/Petri Dishes Glass Wares Including Pasteur Pipettes 4 Facility for Heating Slides (Slide Warming Table) 5 Anaerobic apparatus 6 Autoclave 7 Balance Electronic Digital 8 Biosafety Cabinet Type - 2A 9 BOD Incubator 10 Centrifuge 11 CO2 Incubator/Candle Jar 12 Computer Unit 13 Deep Freeze -20° C & Deep Freezer 14 Distilled water Plant 15 Elisa Reader 16 Elisa Washer 17 Hot Air Oven 18 Incubator 19 Lab Refrigerator (minimum 400 litres) 20 Laminar flow 21 Micrometer eye pieces 22 Micrometer stage 23 Microscope Binocular 24 Microscope with universal condenser containing oil immersion, Bright field, Phase 25 pH determination apparatus 26 Serum inspissators 27 VDRL shaker 28 Vortex Mixer 29 Water bath with variable temperature 30 Oil-immersion lens for student microscope 31 Colony Counter Consumables 32 Antibiotic zone scale 33 Micropipettes – Multi channel & Single channel 34 Digital Thermometers of different temperatures 35 -80°C deep freezer with UPS 36 Real-time PCR machine calibrated for the fluorophore dyes with UPS (2 nos., 2KVA each, with hours back-up) 37 Micro centrifuge / Refrigerated Centrifuge 38 (c) Personal protective 39 Magnifying Glass with metal Handle 40 Metal Mincing Machine 41 Postmortem instrument Set Complete 42 Suction Pumps 43 Filtration Apparatus Seitz 44 Filter and Millipore Filtereach 45 Desiccators 46 Vacuum Desiccators 47 Apron plastic for postmortem 48 Apron rubber for postmortem 49 Lyophilizer 50 Thermal cycler 51 U.V Trans illuminator with photography 52 Colony counter 53 Cold Storage for dead Bodies 54 Phase Contact Microscopes 55 VORTEX SHAKER 56 Electronic Balance 57 Microfuge 58 TRINOCULAR FLOURESCENT MICROSCOPE S.No NAME OF THE INSTRUMENTS 1 Special Drug Delivery systems like Metered Dose Inhalers, Spacers, Rota halers, Nasal sprays, Transdermal patches, Insulin infusion pumps, Insulin pen etc. 2 Samples of dosage formulations of various types including rational and irrational FDC, Essential medicines 3 Computer assisted Learning Laboratory for Pharmacology. 1 Anthropometric Set including 2 Digital pH Meter 3 Digital Spectrophotometer 4 Chemical Balance 5 Distillation Plant 6 Refrigerator 7 Centrifuge 8 Slide Warming Table 9 Hot Plate 10 Spectroscopic Lens With Adjustable Slit 11 Dissection Set Complete 12 Digital BP Instrument 13 Stethoscope 14 Cold Storage For Dead Bodies 15 Weighing Machine For Dead Bodies 16 Autopsy Tables 17 Stryker Type Autopsy Saw With Accessories 18 Weighing Machine For Organs 19 Weighing Machine For Fetus 20 Brain Knife 21 Hack Saw 22 Rib Shear Left & Right 23 Measuring Tape( Steel Tape Roll) 24 Magnifying Lens 25 X- Ray View Box (4 In 1) 26 Tooth Extractor Left & Right 27 Hand Set Heat Sealer 28 Instrument Trolley 29 Rectal Thermometer 30 Portable X-ray Machine (can be shared with Radiology Department) 31 Computer 32 Printer 33 Video Conferencing Room (In the Department to give evidence in the court of law to meet requirement of Digital India) S.No NAME OF THE INSTRUMENTS 1 CYTOSPIN 2 For Student- LED Binocular 3 Stop Watch Reading at 1/5 Second 4 Haemo-Cytometers with red and white Pipettes 5 Staining Jars for Slides 6 Urinometers (Mercury based Instruments to be replaced with other alternatives) 7 Centrifuge Tube Graduated 8 Graduated Cylinders for various capacities ranging from 100cc to 1000cc (for Student) 9 Pipettes of various size with disposal tips. (For Student) 10 Reagent Bottles (For Student) 11 Dropping Bottles (For Student) Morbid 12 Manual Rotary Microtome 13 Automated Rotary Microtome 14 Cryostat 15 Hot plate 16 Paraffin embedding bath 17 Heated Paraffin Embedding Module 18 Cold Plate for Modular Tissue Embedding System 19 Automated Tissue Processor –Histokinette 20 Autoclave 21 Ultrapure water solutions - Distilled water plant 22 Water bath 23 Centrifuge machine 24 Digital SLR at least 20 megapixel with micro, macro, wide angle zoom lenses, Flash and other accessories 25 Digital Automatic camera > 5 megapixel 26 Fully Automated high throughput Multi- Stainer-Workstation 27 Fully Automated Embedding System (Heated embedding module & cold plate) 28 Standalone paraffin dispensing module cold plate holding more than 100 cassettes 29 Stand alone cold plate 30 Single Pan Digital Balance, Chemical 31 Balance, chemical with weights 32 For Students – LED Binocular with Scanner, 10X, 40X, & Oil immersion lenses with Battery Backup 33 Grossing Station - Stainless steel, with Control panel, air filtration system, computer arm with articulation, LED lights Alongwith Computer 34 Five part Fully Automated Cell Counter 35 Three Part Fully Automated Cell Counter 36 Coagulometer (Fully Automated) 1 Hydrometres, milk 2 Electric Incubator 3 Balance for weighting food stuff 4 Clinical Centrifuge 5 Weighing machine adult 6 Baby weighing machine 7 Salters baby weighing machine 8 Harpenden calipers (for skinfold thickness) 9 Height measuring stand 10 Refrigerator 1 cubic feet 11 Iced Lined Refrigerator 12 Smart TV 13 Multimedia Projector with screen 14 Public Address system for field based activities and one each for RHTC &UHTC 15 Chloroscope 16 Horrock’s Apparatus 17 MUAC tapes 18 Hemoglobin meter 19 BP Apparatus (Digital) 20 Stethoscope 21 Sound level meter 22 Water sampling bottle 23 Needle Shredder 24 Vaccine carrier 25 Craft water testing kit 26 Treatment kits as per national health programs 27 Iodine testing kit 28 Glucometer 29 Mosquito catching kit 30 Clinical Thermometer 31 First Aid Kit 32 Otoscope 1 Desk top computer with Printer 2 Cabinet For Slides 3 Fully Automated Embedding System (Heated embedding module & cold plate) 4 Water bath 5 TRINOCULAR FLOURESCENT MICROSCOPE 6 Binocular microscope 7 Penta head Microscope 8 Deca head Microscope 9 Five part Fully Automated Cell Counter 10 Balance, chemical with weights 11 Slide Box 12 X-ray View Box 13 P-H Meter Electric 14 LCD PROJECTOR 15 Three Part Fully Automated Cell Counter 16 Automated urine analyser 17 Specific gravity measures 18 incubator 19 Haemocytometer 20 Automated Haematology Slide Stainer 21 Digital Pan Balance 22 Fully automated Cover slipping station 23 Fully automated immunohistochemistry Set up 24 High speed slide scanner 25 Saw wayer for cutting bones S.No NAME OF THE INSTRUMENTS 1 Drill For Boring Glass 2 Museum jar 3 Surgical instrument for grasping 4 Cold Storage For Dead Bodies 5 Weighing Machine For Organs S.No NAME OF THE INSTRUMENTS 1 Microscope Binocular (Students) 2 Multimedia projector 3 Laptop 4 Desk top computer with printer 5 Vitek 2 compact 6 Autoclave 7 Biosafety cabinet type 2 A 8 Centrifuge 9 Candle Jar 10 Lab Refrigerator 11 Vortex Mixer S.No . NAME OF THE INSTRUMENTS 1 Harmonic scalpel S.No . NAME OF THE INSTRUMENTS 1 Iced Lined Refrigerator 2 Multimedia projector with screen 3 Otoscope 4 sling psychrometer 5 Aneroid barometer 1 Microscope Binocular (Students) 2 Culture Plates/Petri Dishes 3 Glass Wares Including Pasteur Pipettes 4 Facility for Heating Slides (Slide Warming Table) 5 Anaerobic apparatus 6 Autoclave 7 Balance Electronic Digital 8 Biosafety Cabinet Type - 2A 9 BOD Incubator 10 Centrifuge 11 CO2 Incubator/Candle Jar 12 Computer Unit 13 Deep Freeze -20° C & Deep Freezer 14 Distilled water Plant 15 Elisa Reader 16 Elisa Washer 17 Hot Air Oven 18 Incubator 19 Lab Refrigerator (minimum 400 litres) 20 Laminar flow 21 Micrometer eye pieces 22 Micrometer stage 23 Microscope Binocular 24 Microscope with universal condenser containing oil immersion, Bright field, Phase 25 pH determination apparatus 26 Serum inspissators 27 VDRL shaker 29 Water bath with variable temperature 30 Oil-immersion lens for student microscope 31 Colony Counter Consumables 32 Antibiotic zone scale 33 Micropipettes – Multi channel & Single channel 34 Digital Thermometers of different temperatures S.No . NAME OF THE INSTRUMENTS 1 Special Drug Delivery systems like Metered Dose Inhalers, Spacers, Rota halers, Nasal sprays, Transdermal patches, Insulin infusion pumps, Insulin pen etc. 2 Samples of dosage formulations of various types including rational and irrational FDC, Essential medicines 3 Computer assisted Learning Laboratory for Pharmacology. 1 Anthropometric Set including 2 Digital pH Meter 3 Digital Spectrophotometer 4 Chemical Balance 5 Distillation Plant 6 Refrigerator 7 Centrifuge 8 Slide Warming Table 9 Hot Plate 10 Spectroscopic Lens With Adjustable Slit 11 Dissection Set Complete 12 Digital BP Instrument 13 Stethoscope 14 Cold Storage For Dead Bodies 15 Weighing Machine For Dead Bodies 16 Autopsy Tables 17 Stryker Type Autopsy Saw With Accessories 18 Weighing Machine For Organs 19 Weighing Machine For Fetus 20 Brain Knife 21 Hack Saw 22 Rib Shear Left & Right 23 Measuring Tape( Steel Tape Roll) 24 Magnifying Lens 25 X- Ray View Box (4 In 1) 26 Tooth Extractor Left & Right 27 Hand Set Heat Sealer 28 Instrument Trolley 29 Rectal Thermometer 30 Portable X-ray Machine (can be shared with Radiology Department) 31 Computer 32 Printer 33 Video Conferencing Room (In the Department to give evidence in the court of law to meet requirement of Digital India) S.No NAME OF THE INSTRUMENTS 1 CYTOSPIN 2 For Student- LED Binocular 3 Stop Watch Reading 1/5 Second 4 Haemo-Cytometers with red and white Pipettes 5 Staining Jars for Slides 6 Urinometers (Mercury based Instruments to be replaced with other alternatives) 7 Centrifuge Tube Graduated 8 Graduated Cylinders for various capacities ranging from 100cc to 1000cc (for Student) 9 Pipettes of various size with disposal tips. (For Student) 10 Reagent Bottles (For Student) 11 Dropping Bottles (For Student) Morbid 12 Manual Rotary Microtome 13 Automated Rotary Microtome 14 Cryostat 15 Hot plate 16 Paraffin embedding bath 17 Heated Paraffin Embedding Module 18 Cold Plate for Modular Tissue Embedding System 19 Automated Tissue Processor –Histokinette 20 Autoclave 21 Ultrapure water solutions - Distilled water plant 22 Water bath 23 Centrifuge machine 24 Digital SLR at least 20 megapixel with micro, macro, wide angle zoom lenses, Flash and other accessories 25 Digital Automatic camera > 5 megapixel 26 Fully Automated high throughput Multi- Stainer-Workstation 27 Fully Automated Embedding System (Heated embedding module & cold plate) 28 Standalone paraffin dispensing module cold plate holding more than 100 cassettes 29 Stand alone cold plate 30 Single Pan Digital Balance, Chemical 31 Balance, chemical with weights 32 For Students – LED Binocular with Scanner, 10X, 40X, & Oil immersion lenses with Battery Backup 33 Grossing Station - Stainless steel, with Control panel, air filtration system, computer arm with articulation, LED lights Alongwith Computer Five part Fully Automated Cell Counter 35 Three Part Fully Automated Cell Counter 36 Coagulometer (Fully Automated) 1 Hydrometres, milk 2 Electric Incubator 3 Balance for weighting food stuff 4 Clinical Centrifuge 5 Weighing machine adult 6 Baby weighing machine 7 Salters baby weighing machine 8 Harpenden calipers (for skinfold thickness) 9 Height measuring stand 10 Refrigerator 1 cubic feet 11 Iced Lined Refrigerator 12 Smart TV 13 Multimedia Projector with screen 14 Public Address system for field based activities and one each for RHTC &UHTC 15 Chloroscope 16 Horrock’s Apparatus 17 MUAC tapes 18 Hemoglobin meter 19 BP Apparatus (Digital) 20 Stethoscope 21 Sound level meter 22 Water sampling bottle 23 Needle Shredder 24 Vaccine carrier 25 Craft water testing kit 26 Treatment kits as per national health programs 27 Iodine testing kit 28 Glucometer 29 Mosquito catching kit 30 Clinical Thermometer 31 First Aid Kit 32 Otoscope 1 Hostel bed medium size (L72” W32” H18”) 2 M S Hostel bed size (L72” W36” H18”) 3 Hostel bed mattress 4 Student table size (L48” W24” H30”) 5 Tubular chair cushion 6 Students Hostel room cupboard size (6.5X5.75X1.5) 7 Hostel Room cupboard 8 Dining table plain 6 seater 9 Student chair 10 Dining chair 11 Library study table 12 Library student chair 1 Skill Lab on a Turnkey Basis 2 3D Human Body Education system 1 Executive revolving chair 2 Executive Table 3 Computer Table 4 Computer Chair 5 Office Table with Darwer 6 Office Chair 7 Executive Chair 8 Matel Cupboard 9 Glass Cupboard 10 Student Locker 11 Matel Rack 5 sheleves 12 Table For Office 13 Round Stool 14 Podium 15 Lcd Projector 16 Screen 17 Refrigerator 230 liter 18 White Board with Stand 19 Student Chair With Cushion 20 Computer With Ups 21 Printer with scanner 22 laptop 23 Matel Call bell 24 stop watch 25 Dubaal face libirary rack with Adjuest safe with book stopper Reding Table Marine Ply SN Name Of Furniture Item Hi Speed internet desktop Laser black and white printer Colour Ink jet Printer Scanner Xerox Machine Std telephone Fax machine Residency hi speed internet desk top laptop office table big office table small office Chair Museum cupboard Study Table library cupboard cupboard store room rack Cot hangers Laboratory Bench with Cupboard rack for regent bottle Table for office Round Stool Podium LCD Projector Screen Refrigerator 230 liter 25 White Board with Stand 26 Student Chair with Cushion SN Name Of Furniture Item 1 Hi Speed internet desktop 2 Laser black and white printer 3 Color Ink jet Printer 4 Scanner 5 Xerox Machine 6 Std telephone 7 Fax machine 8 Residency hi speed internet desk top laptop 9 office table big 10 office table small 11 office Chair 12 Museum cupboard 13 Study Table 14 library cupboard 15 cupboard 16 store room rack 17 Cot hangers 18 Liborty Bench with Cupboard rack for regent bottel 19 Table for office 20 Round Stool 21 Podium 22 LCD Projector 23 Screen 24 Refrigerator 230 liter 25 White Board with Stand 26 Student Chair With Cushion SN Name Of Furniture Item 1 Office Table Executive 6x2.5x2.75 2 Office Table Executive 5x2.5x2.75 3 Office Table 4x2.5x2.75 4 Composite Lather Chair 5 Super Executive Chair 6 Super Executive Chair 7 Super Executive Chair 8 Executive Chair 9 Spring stool (size:L20W24H18-25) 10 Laboratory Bottle rack 11 Office Cupboard size :6x2.75x1.5 1 Hi Speed internet desktop 2 Laser black and white printer 3 Color Ink jet Printer 4 Scanner 5 Xerox Machine 6 Std telephone 7 Fax machine 8 Residency hi speed internet desk top laptop 9 office Chair 10 Museum cupboard 11 Study Table 12 library cupboard 13 cupboard 14 store room rack 15 Cot hangers 16 Laboratory Bench with Cupboard rack for regent bottle SN Name Of Furniture Item Office Table Executive 6x2.5x2.75 Office Table Executive 5x2.5x2.75 Office Table 4x2.5x2.75 Composit Lather Chair Super Executive Chair Executive Chair Spring stool (size:L20W24H18-25) Matel Rack 5 sheleves Matel Cupboard 10 Glass Cupboard 11 Podium 12 White Board with Stand 13 Student Chair With Cushion 14 Computer With Ups 15 Printer with scanner 16 laptop 17 Matel Call bell 18 stop watch 19 Reading table marine ply Uhtc 20 Office Table Executive 5x2.5x2.75 21 Super Executive Chair 22 Office Table 4x2.5x2.75 23 Executive Chair 24 Office Cupboard 25 Computer With Ups 26 Printer with scanner Rhtc 27 Office Table Executive 5x2.5x2.75 28 Super Executive Chair 29 Office Table 4x2.5x2.75 30 Executive Chair 31 Office Cupboard 32 Computer With Ups 33 Printer with scanner Government S.No NAME OF THE INSTRUMENTS 1 Microscope Binocular (Students) 2 Culture Plates/Petri Dishes 3 Glass Wares Including Pasteur Pipettes 4 Facility for Heating Slides (Slide Warming Table) 5 Anaerobic apparatus 6 Autoclave 7 Balance Electronic Digital 8 Biosafety Cabinet Type - 2A 9 BOD Incubator 10 Centrifuge 11 CO2 Incubator/Candle Jar 12 Computer Unit 13 Deep Freeze -20° C & Deep Freezer 14 Distilled water Plant 15 Elisa Reader 16 Elisa Washer 17 Hot Air Oven 18 Incubator 19 Lab Refrigerator (minimum 400 litres) 20 Laminar flow 21 Micrometer eye pieces 22 Micrometer stage 23 Microscope Binocular 24 Microscope with universal condenser containing oil immersion, Bright field, Phase 25 pH determination apparatus 26 Serum inspissators 27 VDRL shaker 28 Vortex Mixer 29 Water bath with variable temperature 30 Oil-immersion lens for student microscope 31 Colony Counter 32 Antibiotic zone scale 33 Micropipettes – Multi channel & Single channel 34 Digital Thermometers of different temperatures 35 -80°C deep freezer with UPS 36 Real-time PCR machine calibrated for the fluorophore dyes with UPS (2 nos., 2KVA each, with 2 hours back-up) 37 Micro centrifuge / Refrigerated Centrifuge 38 (d) Personal protective equipment (PPE) 39 Magnifying Glass with metal Handle 40 Metal Mincing Machine 41 Postmortem instrument Set Complete 42 Suction Pumps 43 Filtration Apparatus Seitz 44 Filter and Millipore Filtereach 45 Desiccators 46 Vacuum Desiccators 47 Apron plastic for postmortem 48 Apron rubber for postmortem 49 Lyophilizer 50 Thermal cycler 51 U.V Trans illuminator with photography 52 Colony counter 53 Cold Storage for dead Bodies 54 Phase Contact Microscopes 55 VORTEX SHAKER 56 Electronic Balance 57 Microfuge 58 TRINOCULAR FLOURESCENT MICROSCOPE 1 Special Drug Delivery systems like Metered Dose Inhalers, Spacers, Rota halers, Nasal sprays, Transdermal 2 Samples of dosage formulations of various types including rational and irrational FDC, Essential medicines 3 Computer assisted Learning Laboratory for Pharmacology. 1 Anthropometric Set including 2 Digital pH Meter 3 Digital Spectrophotometer 4 Chemical Balance 5 Distillation Plant 6 Refrigerator 7 Centrifuge 8 Slide Warming Table 9 Hot Plate 10 Spectroscopic Lens With Adjustable Slit 11 Dissection Set Complete 12 Digital BP Instrument 13 Stethoscope 14 Cold Storage For Dead Bodies 15 Weighing Machine For Dead Bodies 16 Autopsy Tables 17 Stryker Type Autopsy Saw With Accessories 18 Weighing Machine For Organs 19 Weighing Machine For Fetus 20 Brain Knife 21 Hack Saw 22 Rib Shear Left & Right 23 Measuring Tape( Steel Tape Roll) 24 Magnifying Lens 25 X- Ray View Box (4 In 1) 26 Tooth Extractor Left & Right 27 Hand Set Heat Sealer 28 Instrument Trolley 29 Rectal Thermometer 30 Portable X-ray Machine (can be shared with Radiology Department) 31 Computer 32 Printer 33 Video Conferencing Room (In the Department to give evidence in the court of law to meet requirement of Digital India) S.No NAME OF THE INSTRUMENTS 1 CYTOSPIN 2 For Student- LED Binocular 3 Stop Watch Reading at 1/5 Second 4 Haemo-Cytometers with red and white Pipettes 5 Staining Jars for Slides Clinical 6 Urinometers (Mercury based Instruments to be replaced with other alternatives) 7 Centrifuge Tube Graduated 8 Graduated Cylinders for various capacities ranging from 100cc to 1000cc (for Student) 9 Pipettes of various size with disposal tips. (For Student) 10 Reagent Bottles (For Student) 11 Dropping Bottles (For Student) Morbid 12 Manual Rotary Microtome 13 Automated Rotary Microtome 14 Cryostat 15 Hot plate 16 Paraffin embedding bath 17 Heated Paraffin Embedding Module 18 Cold Plate for Modular Tissue Embedding System 19 Automated Tissue Processor –Histokinette 20 Autoclave 21 Ultrapure water solutions - Distilled water plant 22 Water bath 23 Centrifuge machine 24 Digital SLR at least 20 megapixel with micro, macro, wide angle zoom lenses, Flash and other accessories 25 Digital Automatic camera > 5 megapixel 26 Fully Automated high throughput Multi- Stainer-Workstation 27 Fully Automated Embedding System (Heated embedding module & cold plate) 28 Standalone paraffin dispensing module cold plate holding more than 100 cassettes 29 Stand alone cold plate 30 Single Pan Digital Balance, Chemical 31 Balance, chemical with weights 32 For Students – LED Binocular with Scanner, 10X, 40X, & Oil immersion lenses with Battery Backup 33 Grossing Station - Stainless steel, with Control panel, air filtration system, computer arm with articulation, LED lights Alongwith Computer 34 Five part Fully Automated Cell Counter 35 Three Part Fully Automated Cell Counter 36 Coagulometer (Fully Automated) 1 Microscope Binocular (Students) 2 Culture Plates/Petri Dishes 3 Glass Wares Including Pasteur Pipettes 4 Facility for Heating Slides (Slide Warming Table) 5 Anaerobic apparatus 6 Autoclave 7 Balance Electronic Digital 8 Biosafety Cabinet Type - 2A 9 BOD Incubator 10 Centrifuge 11 CO2 Incubator/Candle Jar 12 Computer Unit 13 Deep Freeze -20° C & Deep Freezer 14 Distilled water Plant 15 Elisa Reader 16 Elisa Washer 17 Hot Air Oven 18 Incubator 19 Lab Refrigerator (minimum 400 litres) 20 Laminar flow 21 Micrometer eye pieces 22 Micrometer stage 23 Microscope Binocular 24 Microscope with universal condenser containing oil immersion, Bright field, Phase 25 pH determination apparatus 26 Serum inspissators 27 VDRL shaker 28 Vortex Mixer 29 Water bath with variable temperature 30 Oil-immersion lens for student microscope 31 Colony Counter Consumables 32 Antibiotic zone scale 33 Micropipettes – Multi channel & Single channel 34 Digital Thermometers of different temperatures 35 -80°C deep freezer with UPS 36 Real-time PCR machine calibrated for the fluorophore dyes with UPS (2 nos., 2KVA each, with hours back-up) 37 Micro centrifuge / Refrigerated Centrifuge 38 (e) Personal protective equipment (PPE) 39 Magnifying Glass with metal Handle 40 Metal Mincing Machine 41 Postmortem instrument Set Complete 42 Suction Pumps 43 Filtration Apparatus Seitz 44 Filter and Millipore Filtereach 45 Desiccators 46 Vacuum Desiccators 47 Apron plastic for postmortem 48 Apron rubber for postmortem 49 Lyophilizer 50 Thermal cycler 51 U.V Trans illuminator with photography 52 Colony counter 53 Cold Storage for dead Bodies 54 Phase Contact Microscopes 55 VORTEX SHAKER 56 Electronic Balance 57 Microfuge 58 TRINOCULAR FLOURESCENT MICROSCOPE 1 Special Drug Delivery systems like Metered Dose Inhalers, Spacers, Rota halers, Nasal sprays, Transdermal patches, Insulin infusion pumps, Insulin pen etc. 2 Samples of dosage formulations of various types including rational and irrational FDC, Essential medicines 3 Computer assisted Learning Laboratory for Pharmacology. 1 Anthropometric Set including 2 Digital pH Meter 3 Digital Spectrophotometer 4 Chemical Balance 5 Distillation Plant 6 Refrigerator 7 Centrifuge 8 Slide Warming Table 9 Hot Plate 10 Spectroscopic Lens With Adjustable Slit 11 Dissection Set Complete 12 Digital BP Instrument 13 Stethoscope 14 Cold Storage For Dead Bodies 15 Weighing Machine For Dead Bodies 16 Autopsy Tables 17 Stryker Type Autopsy Saw With Accessories 18 Weighing Machine For Organs 19 Weighing Machine For Fetus 20 Brain Knife 21 Hack Saw 22 Rib Shear Left & Right 23 Measuring Tape( Steel Tape Roll) 24 Magnifying Lens 25 X- Ray View Box (4 In 1) 26 Tooth Extractor Left & Right 27 Hand Set Heat Sealer 28 Instrument Trolley 29 Rectal Thermometer 30 Portable X-ray Machine (can be shared with Radiology Department) 31 Computer 32 Printer 33 Video Conferencing Room (In the Department to give evidence in the court of law to requirement of Digital India) S.No . NAME OF THE INSTRUMENTS 1 CYTOSPIN 2 For Student- LED Binocular 3 Stop Watch Reading at 1/5 Second 4 Haemo-Cytometers with red and white Pipettes 5 Staining Jars for Slides Clinical 6 Urinometers (Mercury based Instruments to be replaced with other alternatives) 7 Centrifuge Tube Graduated 8 Graduated Cylinders for various capacities ranging from 100cc to 1000cc (for Student) 9 Pipettes of various size with disposal tips. (For Student) 10 Reagent Bottles (For Student) 11 Dropping Bottles (For Student) Morbid 12 Manual Rotary Microtome 13 Automated Rotary Microtome 14 Cryostat 15 Hot plate 16 Paraffin embedding bath 17 Heated Paraffin Embedding Module 18 Cold Plate for Modular Tissue Embedding System 19 Automated Tissue Processor –Histokinette 20 Autoclave 21 Ultrapure water solutions - Distilled water plant 22 Water bath 23 Centrifuge machine 24 Digital SLR at least 20 megapixel with micro, macro, wide angle zoom lenses, Flash and other accessories 25 Digital Automatic camera > 5 megapixel 26 Fully Automated high throughput Multi- Stainer-Workstation 27 Fully Automated Embedding System (Heated embedding module & cold plate) 28 Standalone paraffin dispensing module cold plate holding more than 100 cassettes 29 Stand alone cold plate 30 Single Pan Digital Balance, Chemical 31 Balance, chemical with weights 32 For Students – LED Binocular with Scanner, 10X, 40X, & Oil immersion lenses with Battery Backup 33 Grossing Station - Stainless steel, with Control panel, air filtration system, computer arm with articulation, LED lights Alongwith Computer 34 Five part Fully Automated Cell Counter 35 Three Part Fully Automated Cell Counter 36 Coagulometer (Fully Automated) 1 Hydrometres, milk 2 Electric Incubator 3 Balance for weighting food stuff 4 Clinical Centrifuge 5 Weighing machine adult 6 Baby weighing machine 7 Salters baby weighing machine 8 Harpenden calipers (for skinfold thickness) 9 Height measuring stand 10 Refrigerator 1 cubic feet 11 Iced Lined Refrigerator 12 Smart TV 13 Multimedia Projector with screen 14 Public Address system for field based activities and one each for RHTC &UHTC 15 Chloroscope 16 Horrock’s Apparatus 17 MUAC tapes 18 Hemoglobin meter 19 BP Apparatus (Digital) 20 Stethoscope 21 Sound level meter 22 Water sampling bottle 23 Needle Shredder 24 Vaccine carrier 25 Craft water testing kit 26 Treatment kits as per national health programs 27 Iodine testing kit 28 Glucometer 29 Mosquito catching kit 30 Clinical Thermometer 31 First Aid Kit 32 Otoscope Government 1 Hydrometres, milk 2 Electric Incubator 3 Balance for weighting food stuff 4 Clinical Centrifuge 5 Weighing machine adult 6 Baby weighing machine 7 Salters baby weighing machine 8 Harpenden calipers (for skinfold thickness) 9 Height measuring stand 10 Refrigerator 1 cubic feet 11 Iced Lined Refrigerator 12 Smart TV 13 Multimedia Projector with screen 14 Public Address system for field based activities and one each for RHTC &UHTC 15 Chloroscope 16 Horrock’s Apparatus 17 MUAC tapes 18 Hemoglobin meter 19 BP Apparatus (Digital) 20 Stethoscope 21 Sound level meter 22 Water sampling bottle 23 Needle Shredder 24 Vaccine carrier 25 Craft water testing kit 26 Treatment kits as per national health programs 27 Iodine testing kit 28 Glucometer 29 Mosquito catching kit 30 Clinical Thermometer 31 First Aid Kit 32 Otoscope S.No . NAME OF THE INSTRUMENTS 1 Microscope Binocular (Students) 2 Culture Plates/Petri Dishes 3 Glass Wares Including Pasteur Pipettes 4 Facility for Heating Slides (Slide Warming Table) 5 Anaerobic apparatus 6 Autoclave 7 Balance Electronic Digital 8 Biosafety Cabinet Type - 2A 9 BOD Incubator 10 Centrifuge 11 CO2 Incubator/Candle Jar 12 Computer Unit 13 Deep Freeze -20° C & Deep Freezer 14 Distilled water Plant 15 Elisa Reader 16 Elisa Washer 17 Hot Air Oven 18 Incubator 19 Lab Refrigerator (minimum 400 litres) 20 Laminar flow 21 Micrometer eye pieces 22 Micrometer stage 23 Microscope Binocular 24 Microscope with universal condenser containing oil immersion, Bright field, Phase 25 pH determination apparatus 26 Serum inspissators 27 VDRL shaker 28 Vortex Mixer 29 Water bath with variable temperature 30 Oil-immersion lens for student microscope 31 Colony Counter Consumables 32 Antibiotic zone scale 33 Micropipettes – Multi channel & Single channel 34 Digital Thermometers of different temperatures 35 -80°C deep freezer with UPS 36 Real-time PCR machine calibrated for the fluorophore dyes with UPS (2 nos., 2KVA each, with hours back-up) 37 Micro centrifuge / Refrigerated Centrifuge 38 (f) Personal protective equipment (PPE) 39 Magnifying Glass with metal Handle 40 Metal Mincing Machine 41 Postmortem instrument Set Complete 42 Suction Pumps 43 Filtration Apparatus Seitz 44 Filter and Millipore Filtereach 45 Desiccators 46 Vacuum Desiccators 47 Apron plastic for postmortem 48 Apron rubber for postmortem 49 Lyophilizer 50 Thermal cycler 51 U.V Trans illuminator with photography 52 Colony counter 53 Cold Storage for dead Bodies 54 Phase Contact Microscopes 55 VORTEX SHAKER 56 Electronic Balance 57 Microfuge 58 TRINOCULAR FLOURESCENT MICROSCOPE CYTOSPIN 2 For Student- LED Binocular 3 Stop Watch Reading at 1/5 Second 4 Haemo-Cytometers with red and white Pipettes 5 Staining Jars for Slides Clinical 6 Urinometers (Mercury based Instruments to be replaced with other alternatives) 7 Centrifuge Tube Graduated 8 Graduated Cylinders for various capacities ranging from 100cc to 1000cc (for Student) 9 Pipettes of various size with disposal tips. (For Student) 10 Reagent Bottles (For Student) 11 Dropping Bottles (For Student) Morbid 12 Manual Rotary Microtome 13 Automated Rotary Microtome 14 Cryostat 15 Hot plate 16 Paraffin embedding bath 17 Heated Paraffin Embedding Module 18 Cold Plate for Modular Tissue Embedding System 19 Automated Tissue Processor –Histokinette 20 Autoclave 21 Ultrapure water solutions - Distilled water plant 22 Water bath 23 Centrifuge machine 24 Digital SLR at least 20 megapixel with micro, macro, wide angle zoom lenses, Flash and other accessories 25 Digital Automatic camera > 5 megapixel 26 Fully Automated high throughput Multi- Stainer-Workstation 27 Fully Automated Embedding System (Heated embedding module & cold plate) 28 Standalone paraffin dispensing module cold plate holding more than 100 cassettes 29 Stand alone cold plate 30 Single Pan Digital Balance, Chemical 31 Balance, chemical with weights 32 For Students – LED Binocular with Scanner, 10X, 40X, & Oil immersion lenses with Battery Backup 33 Grossing Station - Stainless steel, with Control panel, air filtration system, computer arm with articulation, LED lights Alongwith Computer 34 Five part Fully Automated Cell Counter 35 Three Part Fully Automated Cell Counter 36 Coagulometer (Fully Automated) 1 Special Drug Delivery systems like Metered Dose Inhalers, Spacers, Rota halers, Nasal sprays, Transdermal patches, Insulin infusion pumps, Insulin pen etc. 2 Samples of dosage formulations of various types including rational and irrational FDC, Essential medicines 3 Computer assisted Learning Laboratory for Pharmacology. 1 Anthropometric Set including 2 Digital pH Meter 3 Digital Spectrophotometer 4 Chemical Balance 5 Distillation Plant 6 Refrigerator 7 Centrifuge 8 Slide Warming Table 9 Hot Plate 10 Spectroscopic Lens With Adjustable Slit 11 Dissection Set Complete 12 Digital BP Instrument 13 Stethoscope B) Medico legal work 14 Cold Storage For Dead Bodies 15 Weighing Machine For Dead Bodies 16 Autopsy Tables 17 Stryker Type Autopsy Saw With Accessories 18 Weighing Machine For Organs 19 Weighing Machine For Fetus 20 Brain Knife 21 Hack Saw 22 Rib Shear Left & Right 23 Measuring Tape( Steel Tape Roll) 24 Magnifying Lens 25 X- Ray View Box (4 In 1) 26 Tooth Extractor Left & Right 27 Hand Set Heat Sealer 28 Instrument Trolley 29 Rectal Thermometer 30 Portable X-ray Machine (can be shared with Radiology Department) 31 Computer 32 Printer 33 Video Conferencing Room (In the Department to give evidence
Contract Date: Nov 21, 2025 Contract Value : ₹ 91.01 Crore
Government Departments No of Bidders 5
Maharashtra View Result →
28.
Housing Urban and Rular Development #9786076 Price Bid
Tender For Mow/Deposit Work Under Jail-3 Sub Dn, Pwd Bhopal-1 1.2 Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. 1.2.1 Lime, moorum, building rubbish 1.2.2 Earth 1.2.3 Manure or sludge 1.2.4 Excavated rock 1.2.5 Sand, stone aggregate below 40mm nominal size 1.2.6 Stone aggregate 40mm nominal size and above 1.2.7 Stone soling 1.2.8 Bricks 1.2.9 S.W. Pipes 1.2.9.1 100 mm dia 1.2.9.2 150 mm dia 1.2.9.3 200 mm dia 1.2.9.4 250 mm dia 1.2.9.5 300 mm dia 1.2.9.6 350 mm dia 1.2.9.7 400 mm dia 1.2.9.8 450 mm dia 1.2.9.9 500 mm dia 1.2.9.10 600 mm dia 1.2.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 1.2.10.1 100 mm dia 1.2.10.2 125 mm dia 1.2.10.3 150 mm dia 1.2.10.4 200 mm dia 1.2.10.5 250 mm dia 1.2.10.6 300 mm dia 1.2.10.7 350 mm dia 1.2.10.8 400 mm dia 1.2.10.9 450 and 500 mm dia 1.2.10.10 600, 700, 750 and 800 mm dia 2 1.3 Add extra for every additional lead of 50 metre or part thereof. 1.3.1 Lime, moorum, building rubbish 1.3.2 Earth 1.3.3 Manure or sludge 1.3.4 Excavated rock 1.3.5 Sand, stone aggregate below 40mm nominal size 1.3.6 Stone aggregate 40mm nominal size and above 1.3.7 Stone soling 1.3.8 Bricks 1.3.9 S.W. Pipes 1.3.9.1 100 mm dia 1.3.9.2 150 mm dia 1.3.9.3 200 mm dia 1.3.9.4 250 mm dia 1.3.9.5 300 mm dia 1.3.9.6 350 mm dia 1.3.9.7 400 mm dia 1.3.9.8 450 mm dia 1.3.9.9 500 mm dia 1.3.9.10 600 mm dia 1.3.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 1.3.10.1 100 mm dia 1.3.10.2 125 mm dia 1.3.10.3 150 mm dia 1.3.10.4 200 mm dia 1.3.10.5 250 mm dia 1.3.10.6 300 mm dia 1.3.10.7 350 mm dia 1.3.10.8 400 mm dia 1.3.10.9 450 and 500 mm dia 1.3.10.10 600, 700, 750 and 800 mm dia 3 2.1 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. 2 2.2 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 5 2.3 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 6 2.4 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.4.1 beyond 30 cm girth up to and including 60 cm girth 2.4.2 beyond 60 cm girth up to and including 120 cm girth 2.4.3 beyond 120 cm girth up to and including 240 cm girth 2.4.4 above 240 cm girth 7 2.5 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil 8 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil 9 2.7 Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.7.1 Ordinary rock 2.7.2 Hard rock (requiring blasting) 2.7.3 Hard rock (blasting prohibited) 10 2.8 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day 2.8.1 Ordinary rock 2.8.2 Hard rock (requiring blasting) 2.8.3 Hard rock (blasting prohibited) 11 2.9 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil 2.9.1 Pipes, cables etc., not exceeding 80 mm dia. 2.9.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.9.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. 12 2.10 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). 13 2.11 Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 14 2.12 Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : 2.12.1 Ordinary rock : 2.12.1.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. 2.12.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia 2.12.2 Hard rock (requiring blasting) 2.12.2.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia 2.12.3 Hard rock (blasting prohibited) 2.12.3.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.3.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.3.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. 15 2.13 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 16 2.14 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 17 2.15 Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). 2.15.1 Depth not exceeding 1.5 m. 2.15.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.15.3 Depth exceeding 3 m but not exceeding 4.5 m. 18 2.16 Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). 2.16.1 Depth not exceeding 1.5 m. 2.16.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.16.3 Depth exceeding 3 m but not exceeding 4.5 m. 19 2.17 Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : 2.17.1 Depth not exceeding 1.5 m. 2.17.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.17.3 Depth exceeding 3 m but not exceeding 4.5 m. 20 2.18 Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). 21 2.23 Extra rates for quantities of works, executed: 2.23.1 In or under water and/or liquid mud, including pumping out water as required. 2.23.2 In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. 22 2.24 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 23 2.25 Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) 2.25.1 All kinds of soil. 2.25.2 Ordinary or hard rock. 24 2.26 Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. 25 2.27 Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. 2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. 26 2.28 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. 2.28.1 All kinds of soil. 2.28.2 Ordinary rock 2.28.3 Hard rock (requiring blasting) 2.28.4 Hard rock (blasting prohibited) 27 2.29 Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) 28 2.30 Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.30.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. 29 2.31 Deduct for disposed soil not levelled and neatly dressed. 30 2.32 Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. 31 2.33 Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). 32 2.34 Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. 33 2.35 Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. 34 2.36 Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. 35 2.37 Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. 36 2.38 Deduct for not watering with the excavated earth for bankingfilling 37 2.39 Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. 2.39.1 Permanent piping system with Junction boxes 2.39.2 Anti-termite chemical injected area 38 2.40 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) 39 3.1 Cement mortar 1:1 (1 cement: 1 sand) 40 3.2 Cement mortar 1:2 (1 cement: 2 sand). 41 3.3 Cement mortar 1:3 (1 cement: 3 sand). 42 3.4 Cement mortar 1:4 (1 cement: 4 sand). 43 3.5 Cement mortar 1:5 (1 cement: 5 sand). 44 3.6 Cement mortar 1:6 (1 cement: 6 sand). 45 3.7 Cement mortar 1:2 (1 cement: 2 stone dust). 46 3.8 Cement mortar 1:2 (1 cement: 2 marble dust). 47 3.9 White cement mortar 1:2 (1 white cement: 2 marble dust). 48 3.10 Cement mortar 1:5 (1 cement: 5 marble dust). 49 3.11 White cement mortar 1:3 (1 white cement: 3 marble dust). 50 3.12 White cement mortar 1:5 (1 white cement: 5 marble dust). 51 3.13 Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 52 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 4.1.1 With 20mm nominal size graded stone aggregate. 4.1.1.1 M-25 – Grade concrete 4.1.1.2 M-20 – Grade concrete 4.1.1.3 M-15 – Grade concrete 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.1 M-15 - Grade concrete 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 4.1.3 With fly ash. 4.1.3.1 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 4.1.3.2 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. 53 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : 4.2.1 With 20mm nominal size graded stone aggregate 4.2.1.1 M-25 – Grade concrete 4.2.1.2 M 20 – Grade concrete 4.2.1.3 M 15 – Grade concrete 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 4.2.2 With 40mm nominal size graded stone aggregate 4.2.2.1 M-15 - Grade concrete 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 54 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for : 4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. 4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. 4.3.3 Above plinth: Columns, pillars, posts and struts. 55 4.4 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . 4.4.1 M-15 (With 20mm nominal size graded stone aggregate) 4.4.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 56 4.5 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) 57 4.6 Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. 4.6.1 M-25 (With 20mm nominal size graded stone aggregate) 4.6.2 M-20 (With 20mm nominal size graded stone aggregate) 4.6.3 M-15 (With 20mm nominal size graded stone aggregate) 4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 58 4.7 Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : 4.7.1 M-15 (With 20mm nominal size graded stone aggregate) 4.7.2 M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 59 4.8 Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. 4.8.1 M-15 (With 20mm nominal size graded stone aggregate) 4.8.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 60 4.9 Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of 61 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). 62 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). 63 4.12 Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. 64 4.13 Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 65 4.14 Extra for concrete work in superstructure above floor two level for each floors or part thereof 66 4.15 Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. 67 4.16 Extra for laying concrete in or under foul positions. 68 4.17 Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) 69 4.18 Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. 70 4.19 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. 71 4.20 Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 72 4.21 Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 73 4.22 Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 74 4.23 Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. 4.23.1 All works up to plinth level: 4.23.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.23.2 All works above plinth and upto floor two level 4.23.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 75 4.24 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. 4.24.1 All works up to plinth level: 4.24.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.24.2 All works above plinth and upto floor two level 4.24.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 76 4.25 Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. 77 4.26 Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering 78 5.1 Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 M-20 Grade Concrete 5.1.2 M-15 Grade Concrete 79 5.2 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: 5.2.1 M-20 Grade Concrete 80 5.3 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. 5.3.1 M-20 Grade Concrete 81 5.4 Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. 5.4.1 M-20 Grade Concrete 82 5.5 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. 5.5.1 M-20 Grade Concrete 83 5.6 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with 5.6.1 M-20 Grade Concrete 88 5.7 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with 5.7.1 M-20 Grade Concrete 84 5.8 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete 85 5.9 Centering and shuttering in cluding strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level 5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 Uptoplinthlevel. 5.9.2.2 Above plinth upto 3.6 m height from plinth level 5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. 5.9.3 Suspended floors, roofs, landings, balconies and access platform. 5.9.4 Shelves(Cast in situ) 5.9.5 Lintels, beams, girders, bressumers and cantilevers 5.9.6 Columns, P i l l a r s , Piers, Abutments, Posts and Struts. 5.9.7 Stairs, (excluding landings) except spiral- Staircases. 5.9.8 Spiral staircases (including landing). 5.9.9 Arches, domes,vaults upto 6m span 5.9.10 Extra for arches, domes, vaults exceeding 6 m span 5.9.11 Chimneys and shafts 5.9.12 Coffer/waffle slab of any size or shape as shown in the drawing. 5.9.13 Well steining 5.9.14 Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. 5.9.15 Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). 5.9.16 Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. 5.9.17 Cornices and mouldings 5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. 5.9.19 Weather shade, Chajjas, corbels etc., including Edges. 5.9.20 Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) 5.9.21 Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) 86 5.10 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) 5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). 87 5.11 Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. 88 5.12 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 5.12.1 50 mm thick 5.12.2 40 mm thick 5.12.3 25 mm thick 89 5.13 Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. 80 5.14 Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. 91 5.15 Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. 92 5.16 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) 5.16.1 Mild steel and Medium Tensile steel bars. 5.16.2 Hard drawn steel wire 5.16.3 Cold twisted bars (CTD) 5.16.4 Hot rolled deformed bars 5.16.5 Hard drawn steel wire fabric 5.16.6 Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 93 5.17 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. 94 5.18 Providing and fixing in position copper plate as per design for expansion joints. 95 5.19 Providing and filling in position, blown bitumen in expansion joints. 96 5.20 Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. 97 5.21 Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. 98 5.22 Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 5. 22.1 12 mm thick 5. 22.2 25 mm thick 5. 22.3 50 mm thick 99 5.23 Providing and fixing sheet covering over expansion joints with iron screws as per design. 5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 5. 23.1.1 150mm wide. 5. 23.1.2 200mm wide. 5. 23.1.3 250mm wide. 5. 23.2 Aluminium fluted strips 3.15mm thick. 5. 23.2.1 150 mm wide. 5. 23.2.2 200 mm wide. 5. 23.2.3 250 mm wide. 5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick 5. 23.3.1 150 mm wide. 5. 23.3.2 200 mm wide. 5. 23.3.3 250 mm wide. 100 5.24 Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 101 5.25 Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition 102 5.26 Extra for laying reinforced cement concrete in or under foul positions. 103 5.27 Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. 5.27.1 All works upto plinth level. 5.27.2 All works above plinth level and upto floor five level. 5.27.3 Add extra for each floor for all works above floor five level. 104 5.28 Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) 5. 28.1 Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) 5. 28.2 Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) 5. 28.3 Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) 5. 28.4 Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) 105 5.29 Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. 106 5.30 Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) 5.30.1 All works upto plinth level. 5.30.2 All works above plinth level and upto floor V level. 5.30.3 Extra for each additional floor for all works above floor five level 107 5.31 Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) 108 5.32 Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. 5.32.1 Non pigmented wet curing compound 5.32.2 Pigmented wet curing compound. 109 5.33 Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. 5. 33.1. Frame 125 mmx 60 mm (double rebate) 5. 33.2. Frame 100mmx 60 mm (Single rebate) 5. 33.3 Frame 85mmx 60 mm (Single rebate) 110 5.34 Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). 111 5.35 Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 5. 35.1 12 mm thick 5. 35.2 25 mm thick. 5. 35.3 50 mm thick. 112 5.36 Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. 113 5.37 Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 5.37.1 150mm wide 5.37.2 200mm wide 5.37.3 250mm wide 114 5.38 Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. 115 5.39 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). 5. 39.1 Floor Joint of 100 mm gap 5. 39.2 Floor Joint of 150 mm gap 5. 39.3 Floor Joint of 200 mm gap 116 5.40 Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 5. 40.1 Wall Joint of 100 mm gap 5. 40.2 Wall Joint of 150 mm gap 5. 40.3 Wall Joint of 200 mm gap 117 5.41 Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) 5.41.1 Roof Joint for 100 mm gap 5.41.2 Roof Joint for 150 mm gap 5.41.3 Roof Joint for 200 mm gap 118 5.42 Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) 119 6.1 Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. 6.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) 120 6.2 Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. 6.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.2.2 Cement mortar 1:6 (1 cement : 6 sand) 121 6.3 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.3.2 Cement Mortar 1:6 (1 cement:6 sand). 122 6.4 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.4.1 Cement mortar 1:4 (1 cement : 4 sand) 6.4.2 Cement Mortar 1:6 (1 cement:6 sand). 123 6.5 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.5.1 Cement mortar 1:4 (1 cement : 4 sand) 6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). 124 6.6 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.6.1 Cement mortar 1:4 (1 cement : 4 sand) 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) 125 6.7 Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : 6.7.1 Having 100 kg / cm2 average compressive strength. 6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.3 Having 50 kg / cm2 average compressive strength. 6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) 126 6.8 Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : 6.8.1 Cement mortar 1:4 (1 cement : 4 sand) 6.8.2 Cement mortar 1:6 (1 cement : 6 sand) 127 6.9 Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) 128 6.10 Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). 129 6.11 Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. 130 6.12 Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. 6.12.1 Cement mortar 1:3 (1 cement : 3 sand) 6.12.2 Cement mortar 1:4 (1 cement : 4 sand) 131 6.13 Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. 6.13.1 Cement mortar 1:3 (1 cement : 3 sand) 6.13.2 Cement mortar 1:4 (1 cement : 4 sand) 132 6.14 Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level 6.14.1 Cement mortar 1:3 (1 cement : 3 sand) 6.14.2 Cement mortar 1:4 (1 cement : 4 sand) 133 6.15 Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. 6.15.1 Having 100 kg/cm2 average compressive strength. 6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.2 Having 75 kg/cm2 average compressive strength. 6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.3 Having 50 kg/cm2 average compressive strength. 6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) 134 6.16 Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. 135 6.17 Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. 136 6.18 Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). 137 6.19 Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design 138 6.20 Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). 139 6.21 Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% 140 6.22 Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. 141 6.23 Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 142 6.24 Extra for laying brick work in or under foul position. 143 6.25 Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. 144 6.26 Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. 6.26.1 AAC Masonry in polymer modified mortar 145 6.27 Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof 146 6.28 Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. 147 6.29 Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. 148 6.30 Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. 149 6.32 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) 6.32.1 From ground level upto plinth level 6.32.2 Above plinth level upto floor II level 150 6.33 Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) 6.33.1 From ground level upto plinth level 6.33.2 Above plinth level upto floor II level 151 6.34 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 152 6.35 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. 153 7.1 Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 sand) 154 7.2 Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. 7.2.1 Cement mortar 1:6 (1cement: 6 sand). 155 7.3 Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof 156 7.4 Extra for random rubble masonry with hard stone in : 7.4.1 Square or rectangular pillars 7.4.2 Circular pillars. 157 7.5 Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. 158 7.6 Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. 7.6.1 Cement mortar 1:6 (1 cement : 6 sand) 7.6.2 Cement mortar 1:6 (1 cement : 6 sand) 159 7.7 Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. 7.7.1 Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) 7.7.2 Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) 160 7.8 Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof 161 7.9 Extra for coursed rubble masonry with hard stone (first or second sort) in : 7.9.1 Square or rectangular pillars 7.9.2 Circular pillars. 7.9.3 Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. 162 7.10 Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : 7.10.1 One face dressed. 7.10.1.1 Red sand stone 7.10.1.2 White sand stone 7.10.2 Both face dressed. 7.10.2.1 Red sand stone. 7.11.2.2 White sand stone 163 7.11 Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.11.1 One face dressed. 7.11.1.1 Red sand stone 7.11.1.2 White sand stone 7.11.2 Both face dressed. 7.11.2.1 Red sand stone. 7.11.2.2 White sand stone 164 7.12 Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.12.1 One face dressed 7.12.1.1 Red sand stone 7.12.1.2 White sand stone 7.12.2 Both face dressed. 7.12.2.1 Red sand stone. 7.12.2.2 White sand stone. 165 7.13 Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.13.1 Red sand stone one face punched. 7.13.2 Red sand stone both face punched 7.13.3 White sand stone one face punched. 7.13.4 White sand stone double face punched 166 7.14 Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. 167 7.15 Extra for plain ashlar or ashlar punched in : 7.15.1 Square or rectangular pillars 168 7.16 Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. 169 7.17 Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). 170 7.18 Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : 7.18.1 Red sand stone 7.18.2 White sand stone 171 7.19 Extra for stone work sunk or moulded or sunk and moulded or carved in : 7.19.1 Triangular or Square or rectangular pillars 7.19.2 Circular or polygonal pillars 172 7.20 Extra for stone work sunk or moulded in cornices. 173 7.21 Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): 7.21.1 Red sand stone - exposed face fine dressed with rough backing. 7.21.1.1 70 mm thick. 7.21.1.2 60 mm thick. 7.21.1.3 50 mm thick 7.21.1.4 40 mm thick. 7.21.1.5 30 mm thick. 7.21.2 Red sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.2.1 70 mm thick. 7.21.2.2 60 mm thick. 7.21.2.3 50 mm thick 7.21.2.4 40 mm thick. 7.21.2.5 30 mm thick. 7.21.3 White sand stone - exposed face fine dressed with rough backing. 7.21.3.1 70 mm thick. 7.21.3.2 60 mm thick. 7.21.3.3 50 mm thick 7.21.3.4 40 mm thick. 7.21.3.5 30 mm thick. 7.21.4 White sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.4.1 70 mm thick. 7.21.4.2 60 mm thick. 7.21.4.3 50 mm thick 7.21.4.4 40 mm thick. 7.21.4.5 30 mm thick. 174 7.22 Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. 175 7.23 Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. 176 7.24 Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases 177 7.25 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. 178 7.26 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: 7.26.1 Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 7.26.2 White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 179 7.27 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: 7.27.1 Red sand stone 7.27.2 White sand stone 180 7.28 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. 181 7.29 Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. 182 7.30 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.30.1 Red sand stone 7.30.2 White sand stone 183 7.31 Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. 7.31.1 Red sand stone 7.31.2 White sand stone 184 7.32 Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 185 7.33 Extra for laying stone work in or under foul position. 186 7.34 Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. 187 7.35 Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 7.35.1 25mm thick Kota stone slabs exposed face dressed and rubbed. 7.35.2 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 7.35.3 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 7.35.4 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. 188 7.36 Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. 7.36.1 Granite stone of any colour and shade 7.36.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble 189 7.37 Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 190 7.38 Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) 7.38.1 Red sand stone. 7.38.2 White sand stone 191 7.39 Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) 192 7.40 Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame 193 8.1 Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). 194 8.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary 195 8.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. 196 8.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. 197 8.5 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. 198 8.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 199 8.7 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 8.7.1 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 8.7.2 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 8.7.3 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 200 8.8 Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., 201 8.9 Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. 202 8.10 Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. 203 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood 9.1.2 Sal wood 9.1.3 Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) 9.1.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 9.1.4.1 Frame of size 100mmX60mm single or double rebate 9.1.4.2 Frame of size 120mmX60mm double rebate. 205 9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). 206 9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) 9.3.1 Sal wood 9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 207 9.4 Extra for additional labour wood work in circular shape, such as in frames of fan light : 9.4.1 Second class teak wood 9.4.2 Sal wood 9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 208 9.5 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters 9.5.1.2 30 mm thick shutters 9.5.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.5.2.1 35 mm thick shutters 9.5.2.2 30 mm thick shutters 9.5.3 Kiln seasoned selected planks of sheesham wood. 9.5.3.1 35 mm thick shutters 9.5.3.2 30 mm thick shutters 9.5.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 9.5.4.1 35 mm thick 9.5.4.2 30 mm thick 209 9.6 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: 9.6.1 Second class teak wood 9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. 9.6.4 Ply wood 5 ply, 9 mm thick : 9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. 9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type 9.6.5 Ply wood 7 ply, 9 mm thick : 9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. 9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type 9.6.6 Particle Board 12 mm thick 9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. 9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. 9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. 9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. 9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick 9.6.7 Float glass panes 9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) 9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) 9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum 210 9.7 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 9.7.1 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 9.7.2 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 9.7.3 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: 211 9.8 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 9.8.1 Second class teak wood 9.8.1.1 35 mm thick 9.8.1.2 30 mm thick 9.8.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.8.2.1 35 mm thick 9.8.2.2 30 mm thick 9.8.3 Kiln seasoned selected planks of sheesham wood. 9.8.3.1 35 mm thick 9.8.3.2 30 mm thick 9.8.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 9. 8.4.1 30 mm thick shutters 9. 8.4.2 35 mm thick shutters 212 9.9 Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. 213 9.10 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 9.10.1 5 mm thick instead of 4 mm thick. 9.10.2 10 to 12 mm float glass 9.10.3 5.5 mm safety glass 9.10.4 10-12mm safety glass 214 9.11 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 215 9.12 Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). 216 9.13 Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). 217 9.14 Deduct for not providing hinges in doors, windows or clerestory window shutters with : 9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. 9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. 218 9.15 Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : 9.15.1 Panelled or panelled and glazed shutters : 9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. 9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 9.15.2 Glazed shutters : 9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 9.15.2. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 219 9.16 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 9.16.1 12 mm thick 9.16.2 18 mm thick 220 9.17 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 9.17.1 18 mm thick 9.17.2 25 mm thick 221 9.18 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. 222 9.19 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 223 9.20 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. 224 9.21 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 225 9.22 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : 9.22.1 Rectangular or square. 9.22.2 Circular. 226 9.23 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). 227 9.24 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). 228 9.25 Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.1.1 Second class teak wood. 9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.1.3 Kiln seasoned selected class of sheesham wood. 9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.2.1 Second class teak wood. 9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.2.3 Kiln seasoned selected class of sheesham wood. 9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.3.1 Second class teak wood. 9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.3.3 Kiln seasoned selected class of sheesham wood. 9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.4.1 Second class teak wood. 9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.4.3 Kiln seasoned selected class of sheesham wood. 229 9.26 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 9.26.1 35 mm thick shutters 9.26.2 30 mm thick shutters 230 9.27 Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. 231 9.28 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 9.28.1 25 mm long 9.28.2 32 mm long 9.28.3 40 mm long 9.28.4 50 mm long 9.28.5 60 mm long 232 9.29 Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 9.29.1 40 mm thick. 9.29.2 25 mm thick. 9.29.3 20 mm thick 9.29.4 12 mm thick 233 9.30 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 9.30.1 12 mm thick 9.30.2 18 mm thick 9.30.3 25 mm thick 234 9.31 Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 235 9.32 Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. 236 9.33 Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. 237 9.34 Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 9.34.1 18 mm thick 9.34.2 25 mm thick 238 9.35 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 9.35.1 2nd class teak wood 9.35.1.1 50x12 mm 9.35.1.2 50 x 20 mm 9.35.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.35.2.1 50x12 mm 9.35.2.2 50x20 mm 239 9.36 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. 240 9.37 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 241 9.38 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 242 9.39 Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. 9.39.1 Non decorative veneer on both sides. 9.39.2 Particle board with decorative veneering on both sides. 243 9.40 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. 244 9.41 Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 9.41.1 12 mm dia. 9.41.2 20 mm dia. 9.41.3 25 mm dia. 245 9.42 Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 9.42.1 20 mm dia (heavy type) 9.42.2 25 mm dia (heavy type) 246 9.43 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.43.1 Fixed to steel windows by welding. 9.43.2 Fixed to openings /wooden frames with rawl plugs screws etc. 247 9.44 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. 248 9.45 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. 249 9.46 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. 9.46.1 With 2nd class teak wood beading 62x19 mm. 9.46.2 With 12 mm mild steel U beading. 250 9.47 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. 251 9.48 Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) 252 9.49 Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : 9.49.1 Sal wood. 9.49.2 Haldu, Kail, Bija wood. 253 9.50 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 9.50.1 125x65x2.12 mm 9.50.2 100x58x1.90 mm 9.50.3 75x47x1.70 mm 9.50.4 50x37x1.50 mm 254 9.51 Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 9.51.1 125x90x4.00 mm 9.51.2 100x75x3.50 mm 9.51.3 75x60x3.10 mm 9.51.4 50x40x2.50 mm 255 9.52 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 9.52.1 125x65x2.12 mm 9.52.2 100x58x1.90 mm 9.52.3 75x47x1.70 mm 9.52.4 50x37x1.50 mm 256 9.53 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 9.53.1 150x125x27x2.80 mm 9.53.2 125x125x27x2.80 mm 9.53.3 100x125x27x2.80 mm 9.53.4 75x100x20x2.24 mm 257 9.54 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 9.54.1 150 mm 9.54.2 125 mm 9.54.3 100 mm 258 9.55 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 9.55.1 150 mm 9.55.2 125 mm 9.55.3 100 mm 259 9.56 Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. 9.56.1 Overall width 35 mm. 9.56.2 Overall width 50 mm. 9.56.3 Overall width 65 mm. 260 9.57 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 9.57.1 300x16 mm 9.57.2 250x16 mm 261 9.58 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.58.1 250x10 mm 9.58.2 200x10 mm 9.58.3 150x10 mm 9.58.4 100x10 mm 262 9.59 Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete 263 9.60 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 9.60.1 300x20x6 mm 9.60.2 250x20x6 mm 264 9.61 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 9.61.1 125 mm 9.61.2 100 mm 9.61.3 75 mm 265 9.62 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 9.62.1 150 mm 9.62.2 115 mm 9.62.3 90 mm 266 9.63 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 9.63.1 300 mm weighing not less than 200 gms. 9.63.2 250 mm weighing not less than 150 gms. 9.63.3 200 mm weighing not less than 120 gms. 267 9.64 Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) 268 9.65 Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 9.65.1 300x16 mm 9.65.2 250x16 mm 269 9.66 Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.66.1 250x10 mm 9.66.2 200x10 mm 9.66.3 150x10 mm 9.66.4 100x10 mm 270 9.67 Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. 271 9.68 Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 9.68.1 300x20x6 mm 9.68.2 250x20x6 mm 272 9.69 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 9.69.1 125 mm 9.69.2 100 mm 9.69.3 75 mm 273 9.70 Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 9.70.1 150 mm 9.70.2 115 mm 9.70.3 90 mm 274 9.71 Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 9.71.1 300 mm weighing not less than 200 gms. 9.71.2 250 mm weighing not less than 150 gms. 9.71.3 200 mm weighing not less than 120 gms. 275 9.72 Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) 276 9.73 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 9.73.1 125x64x1.90 mm 9.73.2 100X58X1.90 mm 9.73.3 75x47x1.80 mm 9.73.4 50x37x1.50 mm 277 9.74 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 9.74.1 125x64x2.50 mm 9.74.2 100x60x2.50 mm 9.74.3 75x50x2.50 mm 278 9.75 Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) 279 9.76 Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. 280 9.77 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 9.77.1 125x85x5.5 mm (heavy type) 9.77.2 125x70x4 mm (ordinary type) 9.77.3 100x85x5.5 mm (heavy type) 9.77.4 100x70x4 mm (ordinary type) 9.77.5 75x65x4 mm (heavy type) 9.77.6 75x40x2.5 mm (ordinary type) 9.77.7 50x40x2.5 mm (ordinary type) 281 9.78 Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 9.78.1 150x125x27x5 mm 9.78.2 125x125x27x5 mm 9.78.3 100x125x27x5 mm 9.78.4 75x100x20x3.2 mm 282 9.79 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.79.1 400x10 mm 9.79.2 250x10 mm 9.79.3 200x10 mm 9.79.4 150x10 mm 9.79.5 100x10 mm 283 9.80 Providing and fixing bright finished brass door latch with necessary screws etc. complete. 9.80.1 300x16x5 mm 9.80.2 250x16x5 mm 284 9.81 Providing and fixing bright finished brass handles with necessary screws etc. complete. 9.81.1 125 mm 9.81.2 100 mm 9.81.3 75 mm 285 9.82 Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 9.82.1 300x16mm 9.82.2 250x16mm 286 9.83 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 287 9.84 Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). 288 9.85 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 289 9.86 Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). 290 9.87 Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 9.87.1 40 mm 9.87.2 50 mm 9.87.3 65 mm 9.87.4 75 mm 291 9.88 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) 292 9.89 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 293 9.90 Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. 294 9.91 Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 9.91.1 300 mm weighing not less than 330 gms 9.91.2 250 mm weighing not less than 280 gms 9.91.3 200 mm weighing not less than 240 gms 295 9.92 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 9.92.1 150 mm 9.92.2 115 mm 9.92.3 90 mm 296 9.93 Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. 297 9.94 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. 298 9.95 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. 299 9.96 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 300 9.97 Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 301 9.98 Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). 302 9.99 Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : 9.99.1 Size 40 mm 9.99.2 Size 50 mm 9.99.3 Size 65 mm 9.99.4 Size 75 mm 303 9.100 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. 304 9.101 Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 9.101.1 300x16mm 9.101.2 250x16mm 305 9.102 Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 9.102.1 400X10mm 9.102.2 300x10mm 9.102.3 250x10mm 9.102.4 200x10 mm 9.102.5 150x10 mm 9.102.6 100x10 mm 306 9.103 Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 9.103.1 300x16x5mm 9.103.2 250x16x5mm 307 9.104 Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. 308 9.105 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 9.105.1 125 mm 9.105.2 100 mm 9.105.3 75 mm 309 9.106 Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. 310 9.107 Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 9.107.1 300 mm weighing not less than 330 gms 9.107.2 250 mm weighing not less than 280 gms 9.107.3 200 mm weighing not less than 240 gms 311 9.108 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 9.108.1 125x75x4 mm 9.108.2 125x63x4 mm 9.108.3 100x75x4 mm 9.108.4 100x63x4 mm 9.108.5 100x63x3.2 mm 9.108.6 75x63x4 mm 9.108.7 75x63x3.2 mm 9.108.8 75x45x3.2 mm 312 9.109 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 9.109.1 300x16 mm 9.109.2 250x16 mm 313 9.110 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.110.1 400X10mm 9.110.2 300x10 mm 9.110.3 250x10 mm 9.110.4 200x10 mm 9.110.5 150x10 mm 9.110.6 100x10 mm 314 9.111 Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. 315 9.112 Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 316 9.113 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.113.1 125 mm 9.113.2 100 mm 9.113.3 75 mm 317 9.114 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 9.114.1 Single rubber stopper 9.114.2 Twin rubber stopper 318 9.115 Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 319 9.116 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 9.117 Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. 321 9.118 Providing and fixing PTMT handles with necessary screws etc. complete. 9.118.1 125x34x24 mm weighing not less than 23 gms. 9.118.2 150x34x24 mm weighing not less than 26 gms. 322 9.119 Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 9.119.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 9.119.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. 323 9.120 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 9.120.1 152x42x18 mm weighing not less than 60 gms. 9.120.2 202x42x18 mm weighing not less than 78 gms. 324 9.121 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. 325 9.122 Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. 326 9.123 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 9.123.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.1.1 Second class teak wood. 9.123.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.1.3 Kiln seasoned selected class of sheesham wood. 9.123.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.2.1 Second class teak wood. 9.123.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.2.3 Kiln seasoned selected class of sheesham wood. 9.123.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.3.1 Second class teak wood. 9.123.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.3.3 Kiln seasoned selected class of sheesham wood. 9.123.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.4.1 Second class teak wood. 9.123.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.4.3 Kiln seasoned selected class of sheesham wood. 327 9.124 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 9.124.1 With 2nd class teak wood beading 62x19 mm. 9.124.2 With 12 mm mild steel U beading. 328 9.125 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. 329 9.126 Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). 330 9.127 Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. 331 9.128 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 332 9.129 Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). 9.129.1 Triple strip vertical type. 9.129.2 Double strip (horizontal type). 333 9.130 Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). 334 9.131 Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 9.131.1 300mm long 9.131.2 450mm long 9.131.3 500mm long 335 9.132 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) 336 9.133 Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. 9.133.1 Marine plywood conforming to IS: 710 9.133.2 Fire retardant plywood conforming to IS: 5509. 337 9.134 Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 9.134.1 1.5 mm thick. 9.134.2 1.0 mm thick. 338 9.135 Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. 339 9.136 Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. 9.136.1 With decorative veneering on one side and commercial veneering on other side. 9.136.2 With non decorative veneering on both sides. 340 9.137 Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). 341 9.138 Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 9.138.1 12 mm thick. 9.138.2 18 mm thick. 9.138.3 25 mm thick. 342 9.139 Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete 343 9.140 Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 9.140.1 18 mm thick 9.140.2 25 mm thick 344 9.141 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 9.141.1 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 9.141.2 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 9.141.3 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 9.141.4 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 9.141.5 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 9.141.6 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 345 9.142 Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 9.142.1 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 9.142.2 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 9.142.3 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 9.142.4 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9.142.5 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. 346 9.143 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. 347 9.144 Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 348 9.145 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). 9.145.1 Board 12 mm thick 9.145.2 Board 18 mm thick 349 9.146 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 9.146.1 18 mm thick 9.146.2 25 mm thick 350 9.147 Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. 351 9.148 Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. 352 9.149 Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. 9.149.1 Wt. 8.20 kg/m2 9.149.2 Wt. 4.2 kg/m2 353 9.150 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 9.150.1 12mm thick commercial ply conforming to IS: 1328 BWR type. 9.150.2 18mm thick commercial ply conforming to IS: 1328 BWR type. 354 9.151 Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. 355 9.152 Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. 356 9.153 Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. 357 9.154 Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. 358 9.155 Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. 9.155.1 Using 8mm thick magnesia block 9.155.2 Using10mm thick magnesia block 9.155.3 Using12mm thick magnesia block 9.155.4 Using12mm thick magnesia block 359 9.156 Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. 360 9.157 Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. 361 9.158 Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: 9.158.1 Extruded section Profile size 48x40 mm. 9.158.2 Extruded section Profile size 42x50 mm. 362 9.159 Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 363 9.160 Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. 364 9.161 Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. 365 9.162 Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. 366 9.163 Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. 367 9.164 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. 368 9.165 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. 369 9.166 Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. 9.166.1 Plain PVC door shutters. 9.166.2 Pre laminated PVC door shutters. 370 9.167 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. 371 9.168 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: 9.168.1 Non decorative finish. 9.168.2 Decorative finish (both side wood grained finish). 372 9.169 Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) 9.169.1 Single rebate (75 mm X 50 mm) 9.169.2 Single rebate (100 mm X50 mm) 9.169.3 Single or double rebate (125 mm X 65 mm) 373 9.170 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter 374 9.171 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 9.171.1 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 9.171.2 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 375 9.172 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 9.172.1 18 mm thick 9.172.2 25 mm thick 376 9.173 Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 9.173.1 6 mm thick 9.173.2 12 mm thick 377 9.174 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. 378 9.175 Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 379 9.176 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. 9.176.1 Non decorative finish (matt finish). 9.176.2 Decorative finish (wood grained finish). 380 9.177 Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. 381 9.178 Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided 382 9.179 Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. 383 9.180 Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 384 9.181 Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. 385 9.182 Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). 386 9.183 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). 387 9.184 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. 388 9.185 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 389 9.186 Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. 390 9.187 Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) 9.187.1 Casement Window (Outward/Inward opening) with hinge System. 9.187.1.1 Frame (50 mm x 50mm) 9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) 9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) 9.187.1.4 ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) 9.187.1.5 Glazing bead (12mm x 18mm) 9.187.2 Casement Window (With friction hinge and outward opening) 9.187.2.1 Casement Frame (67mm x 62mm) 9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) 9.187.2.3 Casement Glazing bead (35mm x 18 mm) 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67mm x 52mm) 9.187.3.2 Sliding window Sash (60mm x 44mm) 9.187.3.3 Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) 9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67mm x 52mm) 9.187.4.2 Sliding Door Sash (80mm x 44mm) 9.187.4.3 Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) 9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) 391 9.188 Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 9.188.1 200 x 19 x 1.9 mm 9.188.2 250 x 19 x 1.9 mm 9.188.3 300 x 19 x 1.9 mm 9.188.4 350 x 19 x 1.9 mm 9.188.5 400 x 19 x 1.9 mm 392 9.189 Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. 393 9.190 Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. 394 9.191 Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. 395 9.192 Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. 396 9.193 Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. 397 9.194 Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) 9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). 9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). 9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) 9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) 9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) 398 9.195 Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) 399 9.196 Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). 9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). 400 9.197 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). 9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) 401 9.198 Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). 9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). 402 9.199 Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). 9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). 9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) 9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) 403 9.200 Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. 404 9.201 Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 9.201.1 24 to 25 mm thick plain solid PVC flush door shutter 9.201.2 28 to 30 mm thick plain solid PVC flush door shutter 405 9.202 Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 9.202.1 1mm thick laminated sheet 9.202.2 0.12 mm thick laminated sheet 406 9.203 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 9.203.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.2 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.3 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 407 9.204 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 9.204.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 9.204.2 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.204.3 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 408 9.205 Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. 409 9.206 Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. 9.206.1 Acrylic Solid Surface sheet – Glacier white designer white 9.206.1.1 6 mm thick sheet 9.206.1.2 12 mm thick sheet 9.206.2 Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 9.206.2.1 6 mm thick sheet 9.206.2.2 12 mm thick sheet 9.206.3 Acrylic Solid Surface sheet - Any other 9.206.3.1 6 mm thick sheet 9.206.3.2 12 mm thick sheet 410 9.207 Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). 411 9.208 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.208.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 412 9.209 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.209.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.209.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 9.209.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 413 9.210 Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.210.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.210.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 414 9.211 HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.211.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.211.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 415 9.212 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.212.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.2 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. 416 9.213 Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 9.213.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 417 9.214 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 9.214.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 418 9.215 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 9.215.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.3 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 419 9.216 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 9.216.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 420 9.217 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. 421 9.218 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. 422 10.1 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 423 10.2 Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 424 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. 425 10.4 Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. 426 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angels 40x40x6mm for diagonal braces 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece. 427 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. 10.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 10.6.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover. 428 10.7 Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. 10.7.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area. 10.7.2 Exceeding 16.80 sqm in area. 429 10.8 Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). 430 10.9 Providing and fixing ball bearing for rolling shutters. 431 10.10 Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). 10.10.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.10.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.10.3 Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. 432 10.11 Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.11.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 433 10.12 Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: 10.12.1 Profile B of 1.60mm thick single rebate of size 80mmx50mm 10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.2 Profile C of 1.60mm thick single rebate of size 100mmx50mm 10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.3 Profile E of 1.60mm thick double rebate of size 115mmx50mm 10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.4 Profile B of 1.25mm thick single rebate of size 80mmx50mm 10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.5 Profile C of 1.25mm thick single rebate of size 100mmx50mm 10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.6 Profile E of 1.25mm thick double rebate of size 115mmx50mm 10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 434 10.13 Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. 10.13.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.13.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 435 10.14 Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.14.1 Hot finished welded type tubes 10.14.2 Hot finished seamless type tubes 10.14.3 Electric resistance or induction butt welded tubes. 436 10.15 Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. 437 10.16 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. 438 10.17 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. 439 10.18 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. 440 10.19 Providing and fixing bolts including nuts and washers complete. 441 10.20 Providing and fixing M.S. rivets of sizes in position. 442 10.21 Welding by gas or electric plant including transportation of plant at site etc. complete. 443 10.22 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. 10.22.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 444 10.23 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. 10.23.1 M.S. tube. 10.23.2 E.R.W. tubes. 445 10.24 Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10.24.1 10x60 mm 10.24.2 10x80 mm 10.24.3 10x120 mm 10.24.4 10x140 mm 10.24.5 10x160mm 446 10.25 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 447 10.26 Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. 10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides 10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 448 10.27 Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. 10.27.1 With 4.0 mm thick glass panes 10.27.2 With 5.50 mm thick glass panes 10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. 10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. 10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. 10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 449 10.28 Add extra for providing and fixing froasted glass instead of float glass. 10.28.1 With 4.0 mm thick glass panes. 10.28.2 With 5.5 mm thick glass panes. 450 10.29 Supplying at site: 10.29.1 R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). 10.29.2 Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) 10.29.3 Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). 451 10.30 Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). 452 10.31 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. 453 10.32 Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. 454 10.33 Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). 455 10.34 Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) 10.34.1 Made of G.I. wire. 10.34.2 Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. 456 10.35 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) 457 10.36 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). 458 10.37 Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer 459 10.38 Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 10.38.1 Openable window 10.38.2 Fixed windows 460 10.39 Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. 10.39.1 Openable single rebate window 10.39.2 Fixed single rebate window 461 10.40 Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. 10.40.1 Openable double rebate window 10.40.2 Fixed double rebate window 462 10.41 Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) 463 10.42 Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 464 10.43 Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 465 11.1 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 466 11.2 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 467 11.3 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 468 11.4 Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. 469 11.5 Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. 470 11.6 Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 471 11.7 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.7.1 Dark shade pigment with ordinary cement. 11.7.2 Light shade pigment with white cement. 11.7.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.7.4 White cement without any pigment. 11.7.5 Light shade pigment with ordinary cement. 11.7.6 Ordinary cement without any pigment. 472 11.8 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) 11.8.1 Dark shade pigment with Ordinary cement. 11.8.2 Light shade pigment with white cement. 11.8.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.8.4 White cement without any pigment. 11.8.5 Light shade pigment with ordinary cement. 11.8.6 Ordinary cement without any pigment. 473 11.9 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.9.1 Dark shade pigment with ordinary cement. 11.9.2 Light shade pigment with white cement. 11.9.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.9.4 White cement without any pigment. 11.9.5 Light shade pigment with ordinary cement. 11.9.6 Ordinary cement without any pigment. 474 11.10 Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : 11.10.1 Dark shade pigment with ordinary cement. 11.10.2 Light shade pigment with white cement. 11.10.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.10.4 White cement without any pigment. 11.10.5 Light shade pigment with ordinary cement. 11.10.6 Ordinary cement without any pigment. 475 11.11 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. 476 11.12 Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 477 11.13 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . 478 11.14 Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.14.1 Light shade using white cement. 11.14.2 Medium shade using 50%white cement and 50% ordinary cement. 11.14.3 Dark shade using ordinary cement. 11.14.4 Ordinary cement without any pigment. 479 11.15 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. 480 11.16 Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : 11.16.1 Light shade pigment using white cement. 11.16.2 Medium shades pigment using 50% white cement and 50% ordinary cement. 11.16.3 Dark shade pigment using ordinary cement. 11.16.4 Ordinary cement without any pigment. 481 11.17 Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.17.1 Light shade pigment using white cement. 11.17.2 Medium shade pigment using 50% white cement, 50% ordinary cement. 11.17.3 Dark shade pigment using ordinary cement. 11.17.4 Ordinary cement without any pigment. 482 11.18 Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. 11.18.1 Light shade pigment using white cement. 11.18.2 Medium shade pigment using 50% white cement 50% Grey cement. 11.18.3 Dark shade pigment using ordinary cement. 11.18.4 Ordinary cement without any pigment. 483 11.19 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) 11.19.1 Makrana white second quality. 11.19.2 Raj Nagar plain. 11.19.3 Agaria White/Morgarh 11.19.4 Katni marble 11.19.5 Black Zebra. 11.19.6 Udaipur / Baroda green marble 11.19.7 Pink plain marble. 11.19.8 Jaisalmer Yellow 484 11.20 Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) 11.20.1 Makrana white second quality. 11.20.2 Raj Nagar plain. 11.20.3 Agaria White/Morgarh 11.20.4 Katni marble 11.20.5 Black Zebra. 11.20.6 Udaipur / Baroda green marble 11.20.7 Pink plain marble. 11.20.8 Jaisalmer Yellow 485 11.21 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) 11.21.1 Makrana white second quality. 11.21.2 Raj Nagar plain. 11.21.3 Agaria White/Morgarh 11.21.4 Katni marble 11.21.5 Black Zebra. 11.21.6 Udaipur / Baroda green marble 11.21.7 Pink plain marble. 11.21.8 Jaisalmer Yellow 486 11.22 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. 11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black 11.22.2.1 Granite fine grained dark crystal of other colours and various patterns 11.22.2.2 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns 11.22.2.3 Granite grey/pink/brown with various patterns 11.22.3 Cuddpah stone 487 11.23 Extra for prefinished nosing to treads of steps of marble stone. 488 11.24 Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. 489 11.25 Extra for prefinished grooves to treads of steps of granite stone 490 11.26 Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 491 11.27 Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 492 11.28 Italian marble flooring in required design and patterns 11.28.1 Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. 493 11.29 Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). 111.29.1 Area of slab over 0.50 sqm 11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.3 Gray/Pink/Brown or equivalent with various patterns 11.29.2 Area of slab upto 0.50 sqm 11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.3 Gray/Pink/Brown or equivalent with various patterns 494 11.30 Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11.30.1 Area of slab over 0.50 sqm 11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.3 Gray/Pink/Brown or equivalent with various patterns 11.90.2 Area of slab upto 0.50 sqm 11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.3 Gray/Pink/Brown or equivalent with various patterns 492 11.31 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) 11.31.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.3 Gray/Pink/Brown or equivalent with various patterns 495 11.32 Deduct for not polishing granite flooring (item no 11.29 & 11.30) 496 11.33 Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, 11.33.1 Flamed Finish Polish 11.33.2 Leather Finish Polish 497 11.34 Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. 498 11.35 Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. 499 11.36 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) 500 11.37 Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 501 11.38 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 502 11.38.1 10-12 mm thick 11.38.2 20 mm thick 503 11.39 Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) 504 11.40 Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 11.40.1 Marble work 11.40.2 Granite work. 505 11.41 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. 506 11.42 Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 507 11.43 Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. 508 11.44 Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. 11.44.1 Red sand stone 11.44.2 White sand stone 11.44.3 Grey lime stone 11.44.4 Kota stone 509 11.45 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. 11.45.1 Red sand stone 11.45.2 White sand stone 510 11.46 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar 11.46.1 Red sand stone 11.46.2 White sand stone 511 11.47 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 512 11.48 Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. 513 11.49 Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 514 11.50 Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. 515 11.51 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. 516 11.52 Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. 517 11.53 Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. 518 11.54 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. 519 11.55 Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. 520 11.56 Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. 521 11.57 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 522 11.58 Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: 523 11.59 Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. 524 11.60 Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. 525 11.60.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. 526 11.60.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 527 11.61 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 11.61.1 Marble tiles (polished) Raj Nagar. 11.61.2 Granite tile of any colour /shade 528 11.62 Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). 11.62.1 Gunmetal cramps. 11.62.2 Stainless steel cramps. 529 11.63 Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 11.63.1 Fastener with threaded dia 6 mm. 11.63.2 Fastener with threaded dia 10 mm. 11.63.3 Fastener with threaded dia 12 mm. 530 11.64 Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. 11.64.1 White Agaria Marble Stone. 11.64.2 Granite Stone of approved shade. 531 11.65 Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 11.65.1 300 mm Finished Floor Height (FFH) 11.65.2 450 mm Finished Floor Height (FFH). 532 11.66 Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. 533 11.67 Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 11.67.1 1 mm thick 11.67.2 2 mm thick 11.67.3 3 mm thick 534 11.68 Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. 535 11.69 Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. 536 11.70 Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. 537 11.71 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 11.71.1 100 mm thick 11.71.2 200mm thick 538 11.72 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 11.72.1 80 mm thick C.C. paver block of M-35 grade 11.72.2 60 mm thick C.C. paver block of M-35 grade 11.72.3 60 mm thick C.C. paver block of M-30 grade 539 11.73 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). 540 11.74 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. 541 11.75 Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. 11.75.1 Granite Door frame for 100mm thick wall Thickness. 11.75.2 Granite Door frame for 200mm thick wall Thickness. 542 11.76 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11.76.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11.76.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 543 11.77 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 77.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11. 77.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 544 11.78 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 78.1 In light shade glossy/ rustic /stain finished 11. 78.1.1 Size 600X600 mm thickness 9-10 mm 11. 78.1.2 Size 800X800mm thickness 11-12mm 11. 78.1.3 Size 800X1200 mm thickness 11-12mm 11. 78.2 In dark shade glossy/ rustic /stain finished 11. 78.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 78.2.2 (b) Size 800X800mm thickness 11-12mm 11. 78.2.3 (c) Size 800X1200 mm thickness 11-12mm 545 11.79 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 79.1 In light shade glossy/ rustic /stain finished 11. 79.1.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.1.2 (b) Size 800X800mm thickness 11-12mm 11. 79.1.3 (c) Size 800X1200 mm thickness 11-12mm 11. 79.2 In dark shade glossy/rustic/stain finished 11. 79.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.2.2 (b) Size 800X800mm thickness 11-12mm 11. 79.2.3 (c) Size 800X1200 mm thickness 11-12mm 546 11.80 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 80.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 80.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.1.2 (b) Size 600X600mm thickness 9-10mm 11. 80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 11. 80.2 In dark colour and shade etc. 11. 80.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.2.2 (b) Size 600X600mm thickness 9-10mm 11. 80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 547 11.81 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 81.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.1.2 (b) Size 600X600mm thickness 9-10mm 11. 81.2 In dark colour and shades etc. 11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.2.2 (b) Size 600X600mm thickness 9-10mm 548 11.82 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete 11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 Size 600X600 mm thickness 9-10 mm 11. 82.1.2 Size 800X800mm thickness 11-12mm 11.82.1.3 Size 800X1600 mm thickness 11-12mm 11.82.1.4 Size 1000X1000 mm thickness 11-12mm 11. 82.1.5 Size 600X1200 mm thickness 11-12mm 11. 82.1.6 Size 800X1200 mm thickness 11-12mm 11. 82.1.7 Size 1200X1200 mm thickness 11-12mm 11.82.1.8 Size 1200X1800 mm thickness 11-12mm 11.82.1.9 Size 1200X2400 mm thickness 11-12mm 11. 82.2 For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm 11. 82.3 For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm 549 11.83 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete 11. 83.1 For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades 11. 83.1.1 Size 600X600 mm thickness 9-10 mm 11. 83.1.2 Size 800X800mm thickness 11-12mm 11. 83.1.3 Size 600X1200 mm thickness 11-12mm 11. 83.1.4 Size 800X1200 mm thickness 11-12mm 550 11.84 Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). 11. 84.1 Area of tiles not less 0.18 sqm 11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 84.1.3 Gray/Pink/Brown with various patterns 551 11.85 Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11. 85.1 Area of tiles not less 0.18 sqm 11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 85.1.3 Gray/Pink/Brown with various patterns 552 11. 86 Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. 11. 86.1 Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. 11. 86.2 Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. 553 11.87 Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. 554 11.88 Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. 555 11.89 Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. 556 11.90 Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. 557 11.91 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 11. 91.1 300x300mm 11. 91.2 400x400mm 11. 91.3 600x600mm 558 11.92 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. 559 12.1 Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00mm thick with zinc coating not less than 275gm/m² 12.1.2 0.80mm thick with zinc coating not less than 275gm/m² 12.1.3 0.63 mm thick with zinc coating not less than 275gm/m² 560 12.2 Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. 561 12.3 Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : 562 12.4 Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 12.4.1 0.80mm thick with zinc coating not less than 275gm/m² 12.4.2 0.63mm thick with zinc coating not less than 275gm/m² 563 12.5 Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² 564 12.6 Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² 565 12.7 Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 12.7.1 0.80mm thick with zinc coating not less than 275gm/m² 12.7.2 0.63mm thick with zinc coating not less than 275gm/m² 566 12.8 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. 567 12.9 Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. 568 12.10 Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. 569 12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. 570 12.12 Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. 12.12.1 Corrugated serrated adjustable ridges 12.12.2 Plain wing adjustable ridges 12.12.3 Close fitting adjustable ridges 12.12.4 Unserrated adjustable hips 571 12.13 Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: 12.13.1 Corrugated apron pieces 12.13.2 Eaves filler pieces 12.13.3 North light curves 12.13.4 ventilator curves 12.13.5 Barge boards 12.13.6 Ridge finials 12.13.7 Special north light curves 12.13.8 S type louvers 572 12.14 Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. 573 12.15 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 574 12.16 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : 12.16.1 Ridges plain (500 - 600mm). 12.16.2 Flashings/ Aprons.( Upto 600 mm) 12.16.3 North light curves. 12.16.4 Barge board (Upto 300 mm) 12.16.5 Crimp curve 12.16.6 Gutter. (600 mm over all girth) 575 12.17 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.17.1 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 12.17.2 2mm thick flat. 576 12.18 Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 12.18.1 10mm thick 12.18.2 16mm thick 577 12.19 Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : 12.19.1 Red sand stone slab 12.19.2 White sand stone slab : 578 12.20 Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 579 12.21 Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. 580 12.22 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 581 12.23 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. 582 12.24 Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) 583 12.25 Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) 584 12.26 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase 585 12.27 Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. 586 12.28 Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 12.28.1 100 mm diameter 12.28.2 150 mm diameter 587 12.29 Providing and fixing ISI marked sand cast iron rain water pipes. 12.29.1 100 mm dia minimum wall thickness 5mm 12.29.2 150 mm dia minimum wall thickness 5mm 588 12.30 Providing lead caulked joints to sand cast iron rain water pipes and fittings : 12.30.1 100 mm dia. Pipe 12.30.2 150 mm dia. Pipe 589 12.31 Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : 12.31.1 Sand cast iron bend : 12.31.1.1 100 mm diameter 12.31.1.2 150 mm diameter 12.31.2 Sand cast iron plain shoes : 12.31.2.1 100 mm diameter 12.31.2.2 150 mm diameter 590 12.32 Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) 591 12.33 Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.33.1 Coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) 12.33.1.2 110 mm (minimum wall thickness 2.2mm) 12.33.2 Single push fit Coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) 12.33.2.2 110 mm (minimum wall thickness 2.2mm) 12.33.3 Single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.4 Single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.5 Bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) 12.33.6 Shoe (Plain) 12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) 12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) 592 12.34 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.34.1 75 mm (minimum wall thickness 1.8mm) 12.34.2 110 mm (minimum wall thickness 2.2mm) 593 12.35 Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. 594 12.36 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. 595 12.37 Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) 12.37.1 Stone ware spout 12.37.2 Upvc spout (Pipe dia.110 mm) 596 12.38 Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. 12.38.1 Base metal thickness 0.8mm up to span 15 meter 12.38.2 Base metal thickness 0.9mm , up to span 18 meter 12.38.3 Base metal thickness 1.0 mm, up to span 21 meter 12.38.4 Base metal thickness 1.1 mm, up to span 23 meter 12.38.5 Base metal thickness 1.2mm, up to span 25meter 12.38.6 Base metal thickness 1.3 mm, up to span 27 meter 12.38.7 Base metal thickness 1.4mm, up to span 29meter 12.38.8 Base metal thickness 1.5 mm, up to span 31 meter 12.38.9 Base metal thickness 1.6 mm, up to span 33 meter 12.38.10 Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. 12.38.11 Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 12.38.12 Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 597 12.39 Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. 598 12.40 Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). 599 12.41 Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. 600 12.42 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 601 12.43 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. 602 12.44 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : 603 12.44.1 With Type N - Normal 50 mm thick 604 12.44.2 With Type SE - Self Extinguishing type 50 mm thick. 605 12.45 Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. 606 12.46 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. 607 12.47 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 608 12.48 Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. 609 12.49 Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. 610 12.50 Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 611 12.51 Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 612 12.52 Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 613 12.53 Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 614 12.54 Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 615 12.55 Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. 12.55.1 Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. 12.55.2 Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. 12.55.3 Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. 616 12.56 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. 617 12.57 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 618 12.58 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.58.1 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board 12.58.1.1 Flat surfaces 12.58.1.2 Curved surfaces 12.58.1.3 Sunk or raised mouldings 12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.58.2 12.5 mm thick tapered edge gypsum board 12.58.2.1 Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). 12.58.2.2 Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) 12.58.2.3 Gypsum moisture resistant board. 12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. 619 12.59 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.59.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.59.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.59.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.59.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. 12.59.5 Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 12.59.6 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 12.59.7 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. 620 12.60 Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with 12.60.1 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.60.2 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. 621 12.61 Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). 622 12.62 Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12.62.1 12mm thick insulating board 12.62.1.1 Natural colour insulating board 12.62.1.2 White face insulating board 12.62.1.3 Flame retardant face insulating board 12.62.2 Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 12.62.3 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 12.62.4 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 12.62.5 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns 623 12.63 Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. 624 12.64 Extra for providing and fixing ceiling to curved surfaces in narrow widths 625 12.65 Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). 626 12.66 Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape 627 12.67 Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. 628 12.68 Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : 12.68.1 With Type N - Normal 50 mm thick 12.68.2 With Type SE - Self Extinguishing type 50 mm thick 629 12.69 Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). 12.69.1 costing upto 70/- per metre, 12.69.2 Rs 70- 150 per meter 12.69.3 Upto 200 per meter 630 12.70 Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.70.1 With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick 12.70.2 With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick 12.70.3 With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick 631 12.71 Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 632 12.72 Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. 12.72.1 Standard White / Natural Satin Shade 12.72.2 Wooden Finish 633 12.73 Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.73.1 Tile of 600 mm wide ,600 mm long and 0.5 mm thick 12.73.2 Plank of 600mm wide ,1200 mm long and 0.6mm thick 634 12.74 Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 635 12.75 Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 636 12.76 Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 637 12.77 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) 638 12.78 Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 639 12.79 Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 640 12.80 Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. 641 12.81 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 12.81.1 With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. 12.81.2 With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. 642 12.82 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 643 12.83 Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . 644 12.84 Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) 645 12.85 Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric 12.85.1 With precontraint tensile membrane 1050 GSM (20 years Warranty) 12.85.2 With precontraint tensile membrane 1050 GSM (15 Years warranty) 646 13.1 12 mm cement plaster of mix : 13.1.1 1:4 (1 cement : 4 sand) 13.1.2 1:6 (1 cement : 6 sand) 647 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix 13.2.1 1:4 (1 cement : 4 sand) 13.2.2 1:6 (1 cement : 6 sand) 648 13.3 20 mm cement plaster of mix : 13.3.1 1:4 (1 cement : 4 sand) 13.3.2 1:6 (1 cement : 6 sand) 649 13.4 12 mm cement plaster finished with a floating coat of neat cement of mix : 13.4.1 1:3 (1 cement : 3 sand) 13.4.2 1:4 (1 cement : 4 sand) 650 13.5 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 13.5.1 1:3 (1 cement : 3 sand) 13.5.2 1:4 (1 cement : 4 sand) 651 13.6 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 652 13.7 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 653 13.8 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 654 13.9 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 655 13.10 Neat cement punning 656 13.11 Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. 657 13.12 Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. 658 13.13 Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. 659 13.14 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 660 13.15 Extra for plastering 13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof 13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof 661 13.16 Extra for plastering on circular work not exceeding 6 m in radius: 13.16.1 In one coat 13.16.2 In two coats 662 13.17 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: 13.17.1 In one coat 13.17.2 In two coats 663 13.18 Extra for plastering Spherical, Groined ceiling, Flewing soffits. 13.18.1 Spherical ceiling 13.18.2 Groined ceiling 13.18.3 Flewing soffits 664 13.19 Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). 665 13.20 Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 666 13.21 Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. 667 13.22 Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). 668 13.23 Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 669 13.24 Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. 670 13.25 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. 671 13.26 Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. 672 13.27 Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete 673 13.27.1 G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. 13.27.2 Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 674 13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : 13.28.1 Flush Band 13.28.2 Sunk Band 13.28.3 Raised Band 13.28.4 Moulded Band 675 13.29 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): 13. 29.1 Flush Band 13. 29.2 Sunk Band 13. 29.3 Raised Band 13. 29.4 Moulded Band 676 13.30 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). 677 13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : 13.31.1 Flush / Ruled/ Struck or weathered pointing. 13.31.2 Raised and cut pointing 13.31.3 Sunk pointing 678 13.32 Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). 13.32.1 Flush/ Ruled pointing 13.32.2 Raised and cut pointing 679 13.33 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) 680 13.34 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing 681 13.35 Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. 682 13.36 Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. 683 13.37 Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. 13.37.1 size 1200mmx1800mm 13.37.2 size 1200mmx2400mm 13.37.3 size 1200mmx3000mm 684 13.38 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 685 13.39 Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. 686 13.40 Extra for lining out plaster to imitate stone or concrete blocks walling. 687 13.41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 688 13.42 Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. 689 13.43 White washing with lime to give an even shade: New work (three or more coats) 690 13.44 Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. 691 13.45 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. 692 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 693 13.47 Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.47.1 One coat. 13.47.2 Two coats. 694 13.48 Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.48.1 One coat. 13.48.2 Two coats. 695 13.49 Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. 696 13.50 Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). 697 13.51 Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. 698 13.52 Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface 699 13.53 Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) 700 13.54 Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.54.1 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture 13.54.2 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. 13.54.3 Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. 701 13.55 Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: 13.55.1 One coat 13.55.2 Two coats 702 13.56 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. 13.56.1 On steel work 13.56.2 On concrete work 703 13.57 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. 704 13.58 Applying a coat of mordant solution on G.S. sheet : 13.58.1 With a solution of 38 gms of copper acetate in a litre of soft water 13.58.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. 705 13.59 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 13.59.1 75 mm diameter pipes 13.59.2 100 mm diameter pipes 13.59.3 150 mm diameter pipes 706 13.60 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 13.60.1 75 mm diameter pipes 13.60.2 100 mm diameter pipes 13.60.3 150 mm diameter pipes 707 13.61 Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) 708 13.62 Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 709 13.63 Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. 710 13.64 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 711 13.65 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 712 13.66 Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.66.1 One coat. 13.66.2 Two coats. 713 13.67 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.67.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 13.67.2 With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. 13.67.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. 714 13.68 Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. 715 13.69 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. 716 13.70 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 717 13.71 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work 718 13.72 Varnishing with varnish of approved brand and manufacture: 13.72.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. 13.72.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. 719 13.73 French spirit polishing: Two or more coats on new works including a coat of wood filler. 720 13.74 Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. 721 13.75 Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. 722 13.76 Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. 723 13.77 Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. 724 13.78 Lettering with black Japan paint of approved brand and manufacture. 725 13.79 Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. 726 13.80 Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 13.80.1 0.8-1.2mm thickness 13.80.2 2.0-2.5mm thickness 727 13.81 Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. 728 13.82 Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 13.82.1 6 mm thick plaster for internal walls 13.82.2 8 mm thick plaster for external walls exposed to weather. 729 13.83 Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) 13.83.1 ACP sheet 2mm thick 13.83.2 ACP sheet 3mm thick 13.83.3 ACP sheet 4mm thick 730 13.84 Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) 13.84.1 PVC foam sheet 3.0 mm thick 13.84.2 PVC foam sheet 5.0 mm thick 13.84.3 PVC foam sheet 8.0 mm thick 731 13.85 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 732 13.86 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. 733 13.87 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 734 13.88 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 735 13.89 Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. 736 13.90 Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. 737 13.91 Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. 738 13.92 Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. 739 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). 740 14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : 14.2.1 Door chowkhats 14.2.2 Window chowkhats 14.2.3 Clerestory window chowkhats 741 14.3 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. 742 14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. 743 14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.1 Float glass panes of thickness 4 mm 14.5.2 Float glass panes of thickness 5.5 mm 744 14.6 Renewing glass panes with now wooden fillets wherever necessary: 14.6.1 Float glass panes of thickness 4 mm 14.6.2 Float glass panes of thickness 5.5 mm 745 14.7 Renewing glass panes and refixing existing wooden fillets: 14.7.1 Float glass panes of thickness 4 mm 14.7.2 Float glass panes of thickness 5.5 mm 746 14.8 Supplying and fixing new wooden fillets wherever necessary: 14.8.1 2nd class teak wood fillets 14.8.2 Haldu/Bija/Kail wood fillets. 747 14.9 Renewal of old putty of glass panes (length). 748 14.10 Refixing old glass panes with putty and nails. 749 14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets). 750 14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 751 14.13 Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : 14.13.1 Red/ white sand stone slabs 30 to 50 mm thick. 752 14.14 Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.14.1 Sal wood battens. 753 14.15 Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.15.1 Not exceeding 4.00 metres in length. 14.15.1.1 Sal wood beams 14.15.1.2 Haldu/Bija/Kail wood fillets. 14.15.2 Above 4.00 metres and upto 5.00 metres length. 14.15.2.1 Sal wood beams 14.15.2.2 Haldu/Bija/Kail wood fillets. 754 14.16 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. 755 14.17 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. 756 14.18 Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. 757 14.19 Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. 758 14.20 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. 14.20.1 Wheel 50 mm dia. and below. 14.20.2 Wheel above 50 mm dia. 759 14.21 Providing and fixing 25 mm thick shutters for cupboard etc. : 14.21.1 Panelled or panelled and glazed shutters : 14.21.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2 Glazed shutters : 14.21.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 760 14.22 Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: 14.22.1 Second class teak wood. 14.22.2 Hard wood, finger jointed 761 14.23 Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.23.1 20 mm diameter. 14.23.2 25 mm diameter. 762 14.24 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. 763 14.25 Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: 14.25.1 Sal wood. 14.25.2 Haldu/Bija/Kail wood. 764 14.26 White washing with lime old work to give an even shade : 14.26.1 two or more coats 14.26.2 one or more coats 765 14.27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 766 14.28 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. 767 14.29 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). 768 14.30 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 769 14.31 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). 770 14.32 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 14.32.1 75 mm diameter pipes 14.32.2 100 mm diameter pipes 14.32.3 150 mm diameter pipes 771 14.33 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 14.33.1 75 mm diameter pipes 14.33.2 100 mm diameter pipes 14.33.3 150 mm diameter pipes 772 14.34 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 14.34.1 75 mm diameter pipes 14.34.2 100 mm diameter pipes 14.34.3 150 mm diameter pipes 773 14.35 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 774 14.36 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. 775 14.37 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 776 14.38 Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. 777 14.39 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 778 14.40 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. 779 14.41 French spirit polishing: One or more coats on old work. 780 14.42 Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. 781 14.43 Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor 14.43.1 One or more coats on old work. 782 14.44 Polishing on wood work with readymade wax polish of approved brand and manufacture : 14.44.1 Old work 783 14.45 Re-lettering with black Japan paint of approved brand and manufacture. 784 14.46 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 785 14.47 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 14.47.1 32 mm dia 14.47.2 40 mm dia 786 14.48 Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. 787 14.49 Finishing walls with water proofing cement paint of required shade : 14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. 14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. 788 14.50 Finishing walls with textured exterior paint of required shade : 14.50.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 14.50.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 789 14.51 Finishing walls with Acrylic Smooth exterior paint of required shade : 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). 14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). 790 14.52 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). 791 14.53 Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. 14.53.2 Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm 14.53.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. 792 14.54 Varnishing with varnish of approved brand and manufacture: 14.54.1 One or more coats with copal varnish. 14.54.2 One or more coats with spar varnish. 793 14.55 Melamine polishing on wood work (one or more coat). Old work 794 14.56 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 795 14.57 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 796 14.58 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. 14.58.1 Rough chiseled dressed stone 14.58.2 Fine dressed stone 797 14.59 Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) 798 14.60 Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 799 14.61 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). 800 14.62 Colour washing with lime to give an even shade: 14.62.1 (one or more coats) 14.62.2 (two or more coats) 801 14.63 Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. 802 14.64 Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. 803 14.70 Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 14.70.1 8 mm dia bar 10 mm dia hole 14.70.2 10 mm dia bar 12 mm dia hole 14.70.3 12 mm dia bar 16 mm dia hole 14.70.4 16 mm dia bar 20 mm dia hole 14.70.5 20 mm dia bar 25 mm dia hole 14.70.6 25 mm dia bar 32 mm dia hole 14.70.7 32 mm dia bar 40 mm dia hole 804 14.71 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 14.71.1 125x70x4 mm (ordinary type) 14.71.2 100x70x4 mm (ordinary type) 14.71.3 75x65x4 mm (heavy type) 14.71.4 75x40x2.5 mm (ordinary type) 14.71.5 50x40x2.5 mm (ordinary type) 805 14.72 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. 806 14.73 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. 807 14.74 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 808 14.75 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. 809 14.77 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 14.77.1 Bars upto 12 mm diameter 14.77.2 Bars above 12 mm diameter 810 14.78 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. 14.78.1 Upto and including 12mm dia 811 14.83 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) 14.83.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work 14.83.2 Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. 14.83.3 Epoxy injection grout in concrete/RCC work of approved make 812 14.85 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 813 14.88 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. 814 15.1 Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. 815 15.2 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). 816 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 817 15.4 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. 818 15.5 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. 819 15.6 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 820 15.6.1 In lime mortar with old mughal bricks. 15.6.2 In lime mortar. 15.6.3 In cement mortar. 821 15.7 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : 15.7.1 From brick work in lime mortar. 15.7.2 From brick work in cement mortar. 822 15.8 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: 15.8.1 In lime mortar. 15.8.2 In cement mortar. 823 15.9 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: 15.9.1 In lime mortar. 15.9.2 In cement mortar. 824 15.10 Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : 15.10.1 In lime mortar. 15.10.2 In cement mortar. 825 15.11 Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. 15.11.1 For thickness of tiles 10 mm to 25 mm. 15.11.2 For thickness of tiles above 25 mm and upto 40 mm. 826 15.12 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 827 15.13 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 828 15.14 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.14.1 Of area 3 sq. metres and below. 15.14.2 Of area beyond 3 sq. metres. 829 15.15 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 15.15.1 Of area 3 sq. metres and below. 15.15.2 Of area beyond 3 sq. metres. 830 15.16 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: 15.16.1 Of sectional area below 40 square centimetres. 15.16.2 Of sectional area 40 square centimetres and above. 831 15.17 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : 15.17.1 Of sectional area below 40 square centimetres. 15.17.2 Of sectional area 40 square centimetres and above. 832 15.18 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : 15.18.2 Of sectional area below 40 square centimetres. 15.18.1 Of sectional area 40 square centimetres and above. 833 15.19 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: 15.19.1 R.S. Joists 15.19.2 Channels, angles, tees and flats 834 15.20 Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. 835 15.21 Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. 836 15.22 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres 837 15.23 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. 838 15.24 Extra for marking of structural steel work required to be re- erected. 839 15.25 Removal of old Tarfelt i/c disposal as directed by Engineer in charge. 840 15.26 Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 841 15.27 Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: 15.27.1 G.S. Sheet 15.27.2 Asbestos/ Non asbestors sheet 842 15.28 Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 843 15.29 Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 844 15.30 Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. 845 15.31 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : 15.31.1 T’ or ‘L’ iron or pipe 15.31.2 R.C.C. 846 15.32 Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. 847 15.33 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 848 15.34 Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. 849 15.35 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. 850 15.36 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 15.36.1 Upto 10 mm thick 15.36.2 Thickness above 10 mm upto 25 mm 15.36.3 Thickness above 25 mm upto 40 mm 851 15.37 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: 15.37.1 Thickness upto 40 mm 15.37.2 Thickness above 40 mm upto 75 mm 852 15.38 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 853 15.39 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 15.39.1 75 to 80 mm dia pipe. 15.39.2 100 mm dia pipe 15.39.3 150 mm dia pipe 854 15.40 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15.40.1 15 mm to 40 mm nominal bore 15.40.2 Above 40 mm nominal bore 855 15.41 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: 15.41.1 Upto 150 mm diameter 15.41.2 Above 150 mm dia upto 300 mm dia. 15.41.3 Above 300 mm diameter 856 15.42 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 857 15.43 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 858 15.44 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 859 15.45 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 860 15.46 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 15.46.1 Upto 150 mm diameter 15.46.2 Above 150 mm diameter 861 15.47 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 862 15.48 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 863 15.49 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. 864 15.50 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 15.50.1 100 mm diameter 15.50.2 150 mm diameter 15.50.3 200 mm diameter 15.50.4 250 mm diameter 15.50.5 300 mm diameter 15.50.6 350 mm diameter 15.50.7 400 mm diameter 15.50.8 440 mm diameter 865 15.51 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : 15.51.1 Rectangular manhole 90x80 cm and 45 cm deep 15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. 15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. 15.51.4 Circular manhole 122 cm diameter and 1.68 m deep 866 15.52 Extra for depth of manholes dismantled: 15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. 15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. 15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). 15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). 867 15.53 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. 868 15.54 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : 869 15.55 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 870 15.56 Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 871 15.57 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. 872 15.58 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : 15.58.1 Water bound macadam road 15.58.2 Bituminous road 873 15.59 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : 15.59.1 Up to 600 mm diameter 15.59.2 Above 600 mm diameter 874 15.60 Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge 15.60.1 Up to 150 mm diameter 15.60.2 Above 150 mm diameter 875 15.61 Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. 876 15.62 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 15.62.1 120 x 120 cm (outside to outside) 15.62.2 210 x 120 cm (outside to outside) 877 15.63 Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. 878 15.64 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 879 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. 880 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid 17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. 881 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. 882 17.4 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. 883 17.5 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 884 17.6 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.6.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 17.6.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. 17.6.3 Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. 17.6.4 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. 885 17.7 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require 17.7.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. 17.7.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. 17.7.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. 17.7.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. 886 17.8 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.8.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern. 17.8.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. 17.8.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. 17.8.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. 887 17.9 Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. 888 17.10 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. 889 17.11 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 17.11.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. 17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. 17.11.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. 17.11.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. 17.11.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. 17.11.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. 17.11.10 Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). 17.11.11 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap 17.11.12 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. 890 17.12 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 891 17.13 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. 892 17.14 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 17.14.1 Kitchen sink with drain board 17.14.1.1 510x1040 mm bowl depth 250mm. 17.14.1.2 510x1040 mm bowl depth 225mm. 17.14.1.3 510x1040 mm bowl depth 200mm. 17.14.1.4 510x1040 mm bowl depth 178mm. 17.14.2 Kitchen sink without drain board 17.14.2.1 610x510 mm bowl depth 200 mm. 17.14.2.2 610x460 mm bowl depth 200 mm. 17.14.2.3 470x420 mm bowl depth 178 mm. 893 17.15 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : 17.15.1 Size450x300x150mm 17.15.2 Size600x450x200mm 894 17.16 Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. 895 17.17 Providing and fixing white vitreous china water closet squatting pan (Indian type) 17.17.1 Long pattern W.C. pan of size 580 mm 17.17.2 Orissa pattern W.C. pan of size 580x440 mm 896 17.18 Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm 897 17.19 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 898 17.20 Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. 899 17.21 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 17.21.1 250x130x30 mm 17.21.2 250x125x25 mm 900 17.22 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity 17.22.1 White 17.22.2 coloured 901 17.23 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) 17.23.1 White 17.23.2 Coloured 902 17.24 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.24.1 White 17.24.2 Black 17.24.3 Coloured (other than black and white) 903 17.25 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 904 17.26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. 905 17.27 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. 906 17.28 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 907 17.29 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 17.29.1 Flat back wash basin of size 630x450mm. 17.29.2 Flat back wash basin of size 550x400mm. 17.29.3 Angle back wash basin of size 600x480mm. 17.29.4 Angle back wash basin of size 400x400mm. 17.29.5 Flat back wash basin of size 450x300mm. 17.29.6 Surgeon type wash basin of size 660x460mm. 908 17.30 Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. 909 17.31 Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: 17.31.1 Size 450x300x150 mm. 17.31.2 Size 600x450x200 mm. 910 17.32 Providing and fixing soil, waste and vent pipes: 17.32.1 Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 17.32.1.1 75 mm dia with wall thickness of 5 mm 17.32.1.2 100 mm dia with wall thickness of 5 mm 17.32.2 Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 17.32.2.1 75 mm dia with wall thickness of 3.5 mm 17.32.2.2 100 mm dia with wall thickness of 4 mm 17.32.2.3 150mm dia with wall thickness of 5mm 17.32.3 Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 17.32.3.1 75 mm dia with wall thickness of 3.5 mm 17.32.3.2 100 mm dia with wall thickness of 3.5mm 17.32.3.3 150mm dia with wall thickness of 4 mm 911 17.33 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 17.33.1 75 mm dia pipe 17.33.2 100 mm dia pipe 912 17.34 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : 17.34.1 For 75 mm dia pipe 17.34.2 For 100 mm dia pipe 17.34.3 For 150 mm dia pipe 913 17.35 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.35.1 150 mm dia 17.35.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.35.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.35.2 100 mm dia 17.35.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.35.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.35.3 75 mm dia 17.35.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm 17.35.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.35.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 914 17.36 Providing and fixing plain bend of required degree. 17.36.1 150 mm dia 17.36.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.36.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.36.2 100 mm dia 17.36.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.36.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.36.3 75 mm dia 17.36.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.36.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 915 17.37 Providing and fixing heel rest sanitary bend 17.37.1 100 mm dia 17.37.1.1 Sand cast iron as per IS - 1729 17.37.1.2 Spun cast iron as per IS - 3989 17.37.2 75 mm dia 17.37.2.1 Sand cast iron as per IS - 1729 17.37.2.2 Spun cast iron as per IS - 3989 916 17.38 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 17.38.1.1 150X150X150X150 17.38.1.2 Sand cast iron as per IS - 3989 17.38.2 100x100x100x100mm 17.38.2.1 Sand cast iron as per IS - 1729 17.38.2.2 Spun cast iron as per IS - 3989 17.38.3 75x75x75x75mm 17.38.3.1 Sand cast iron as per IS - 1729 17.38.3.2 Spun cast iron as per IS - 3989 917 17.39 Providing and fixing double equal plain junction of required degree. 17.39.1 150X150X150X150 mm 17.39.1.1 Sand cast iron as per IS - 3989 17.39.2 100x100x100x100mm 17.39.2.1 Sand cast iron as per IS – 1729 17.39.2.2 Spun cast iron as per IS – 3989 17.39.2.3 Hubless cast(spun) iron as per IS- 15905 17.39.3 75x75x75x75 mm 17.39.3.1 Sand cast iron as per IS – 1729 17.39.3.2 Spun cast iron as per IS – 3989 17.39.3.3 Hubless cast(spun) iron as per IS- 15905 918 17.40 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.40.1 150X150X150 mm 17.40.1.1 Spun cast iron as per IS - 3989 17.40.2 100x100x100 mm 17.40.2.1 Sand cast iron as per IS - 1729 17.40.2.2 Spun cast iron as per IS - 3989 17.40.3 75x75x75 mm 17.40.3.1 Sand cast iron as per IS - 1729 17.40.3.2 Spun cast iron as per IS - 3989 919 17.41 Providing and fixing single equal plain junction of required degree : 17.41.1 150X150X150 mm 17.41.1.1 Spun cast iron as per IS - 3989 17.41.2 100x100x100 mm 17.41.2.1 Sand cast iron as per IS – 1729 17.41.2.2 Spun cast iron as per IS – 3989 17.41.2.3 Hubless cast(spun) iron as per IS- 15905 17.41.3 75x75x75 mm 17.41.3.1 Sand cast iron as per IS – 1729 17.41.3.2 Spun cast iron as per IS – 3989 17.41.3.3 Hubless cast(spun) iron as per IS- 15905 920 17.42 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm 17.42.1 Sand cast iron as per IS - 1729 17.42.2 Spun cast iron as per IS - 3989 921 17.43 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm 17.43.1.1 Sand cast iron as per IS – 1729 17.43.1.2 Spun cast iron as per IS – 3989 17.43.1.3 Hubless cast(spun) iron as per IS- 15905 922 17.44 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm 17.44.1 Sand cast iron as per IS - 1729 17.44.2 Spun cast iron as per IS - 3989 923 17.45 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm 17.45.1 Sand cast iron as per IS – 1729 17.45.2 Spun cast iron as per IS – 3989 17.45.3 Hubless cast(spun) iron as per IS- 15905 924 17.46 Providing and fixing double equal plain invert branch of required degree: 17.46.1 100x100x100x100 mm 17.46.1.1 Sand cast iron as per IS - 1729 17.46.1.2 Sand cast iron as per IS - 3989 17.46.1.3 Hubless cast(spun) iron as per IS- 15905 17.46.2 75x75x75x75 mm 17.46.2.1 Sand cast iron as per IS - 1729 17.46.2.2 Spun cast iron as per IS - 3989 925 17.47 Providing and fixing single equal plain invert branch of required degree: 17.47.1 100x100x100 mm 17.47.1.1 Sand cast iron as per IS - 1729 17.47.1.2 Sand cast iron as per IS - 3989 17.47.1.3 Hubless cast(spun) iron as per IS- 15905 17.47.2 75x75x75 mm 17.47.2.1 Sand cast iron as per IS - 1729 17.47.2.2 Sand cast iron as per IS - 3989 17.47.2.3 Hubless cast(spun) iron as per IS- 15905 926 17.48 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm 17.48.1 Sand cast iron as per IS - 1729 17.48.2 Spun cast iron as per IS - 3989 927 17.49 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm 17.49.1 Sand cast iron as per IS - 1729 17.49.2 Spun cast iron as per IS - 3989 17.49.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 928 17.50 Providing and fixing sand cast iron S&S off sets as per IS: 1729 17.50.1 76 mm off sets 17.50.1.1 With 75 mm dia pipe 17.50.1.2 With 100 mm dia pipe 17.50.2 114 mm off sets 17.50.2.1 With 75 mm dia pipe 17.50.2.2 With 100 mm dia pipe 17.50.3 152 mm off sets 17.50.3.1 With 75 mm dia pipe 17.50.3.2 With 100 mm dia pipe 929 17.51 Providing and fixing sand cast iron S&S off sets as per IS: 3989. 17.51.1 75 mm off sets 17.51.1.1 With 75 mm dia pipe 17.51.1.2 With 100 mm dia pipe 17.51.1.3 With 150 mm dia pipe 17.51.2 150 mm off sets 17.51.2.1 With 75 mm dia pipe 17.51.2.2 With 100 mm dia pipe 17.51.2.3 With 150 mm dia pipe 930 17.52 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 17.52.1 100 mm 17.52.1.1 Sand cast iron as per IS - 1729 17.52.1.2 Spun cast iron as per IS - 3989 17.52.2 75 mm 17.52.2.1 Sand cast iron as per IS - 1729 17.52.2.2 Spun cast iron as per IS - 3989 931 17.53 Providing and fixing terminal guard: 17.53.1 150mm 17.53.1.1 Sand cast iron as per IS - 1729 17.53.1.2 Spun cast iron as per IS - 3989 17.53.1.3 Hubless cast(spun) iron as per IS- 15905 17.53.2 100 mm 17.53.2.1 Sand cast iron as per IS - 1729 17.53.2.2 Spun cast iron as per IS - 3989 17.35.2.3 Hubless cast(spun) iron as per IS-15905 17.53.3 75 mm 17.53.3.1 Sand cast iron as per IS - 1729 17.53.3.2 Spun cast iron as per IS - 3989 17.53.3.3 Hubless cast(spun) iron as per IS- 15905 932 17.54 Providing and fixing collar: 17.54.1 100 mm 17.54.1.1 Sand cast iron S & S as per IS - 1729 17.54.1.2 Sand cast iron S & S as per IS - 3989 17.54.2 75 mm 17.54.2.1 Sand cast iron S & S as per IS - 1729 17.54.2.2 Sand cast iron S & S as per IS- 3989 933 17.55 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 17.55.1 150mm 17.55.2 100 mm 17.55.3 75 mm 934 17.56 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 17.56.1 100 mm dia 17.56.2 75 mm dia 935 17.57 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.57.1 100 mm inlet and 100 mm outlet 17.57.1.1 Spun cast iron S & S as per IS: 3989. 17.57.1.2 Sand Cast iron S & S as per IS: 1729. 17.57.1.3 Hubless cast(spun) iron as per IS-15905 17.57.2 100 mm inlet and 75 mm outlet 17.57.2.1 Sand cast iron S & S as per IS - 3989 17.57.2.2 Spun Cast iron S & S as per IS- 1729. 17.57.2.3 Hubless cast(spun) iron as per IS- 15905 936 17.58 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 17.58.1 75 mm diameter 17.58.2 110 mm diameter 937 17.59 Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 17.59.1 Coupler 17.59.1.1 75 mm 17.59.1.2 110 mm 17.59.2 Single pushfit Coupler 17.59.2.1 75 mm 17.59.2.2 110 mm 17.59.3 Single tee with door 17.59.3.1 75x75x75 mm 17.59.3.2 110x110x110 mm 17.59.4 Single tee without door 17.59.4.1 75x75x75 mm 17.59.4.2 110x110x110 mm 17.59.5 Bend 87.50 17.59.5.1 75 mm bend 17.59.5.2 110 mm bend 938 17.60 Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 17.60.1 75 mm 17.60.2 110 mm 939 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet 940 17.62 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. 17.62.1 Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). 17.62.2 Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). 17.62.3 Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). 941 17.63 Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 17.63.1 100 mm dia 17.63.2 75 mm dia 17.63.3 50 mm dia 942 17.64 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.64.1 Semi rigid pipe 17.64.1.1 32 mm dia 17.64.1.2 40 mm dia 17.64.2 Flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia 17.64.2.2 40 mm dia 943 17.65 Providing and fixing 100 mm sand cast Iron grating for gully trap. 944 17.66 Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. 945 17.67 Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 946 17.68 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing 17.68.1 Circular shape 450mm dia. 17.68.2 Rectangular shape 453x357mm 17.68.3 Oval shape 450x350mm (outer dimensions) 17.68.4 Rectangular shape 1500x450 mm 947 17.69 Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 948 17.70 Providing and fixing toilet paper holder: 17.70.1 C.P. brass 17.70.2 Vitreous china 949 17.71 Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. 17.71.1 Waste coupling 31mm of 79mm length and 62mm breadth 17.71.2 Waste coupling 38mm of 83mm length and 77mm breadth 950 17.72 Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. 951 17.73 Providing and fixing CP brass towel rail of approved quality and make 17.73.1 600x20mm 17.73.2 450x20mm 952 17.74 Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring 953 17.75 Providing and fixing CP brass soap dish of approved quality and make 954 17.76 Providing and fixing CP brass Urinal spreader of approved quality and make 955 17.77 Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. 956 17.78 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 17.78.1 100 mm dia. 957 17.79 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.79.1 Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. 17.79.2 Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. 958 17.80 Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.80.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. 17.80.2 Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. 959 17.81 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. 960 17.82 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 961 17.83 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 17.83.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 17.83.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. 962 17.84 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. 963 17.85 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 964 17.86 Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. 965 17.87 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 966 17.88 Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. 967 17.89 Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. 968 17.90 Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. 969 17.91 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 17.91.1 75 mm diameter pipe 17.91.2 100 mm diameter pipe 17.91.3 150 mm diameter pipe 970 17.92 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 17.92.1 75 mm diameter pipe 17.92.2 100 mm diameter pipe 17.92.3 150 mm diameter pipe 971 17.93 Repainting bath tub of size 1700x730x430mm with enamel paint. 972 17.94 Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 17.94.1 100 mm dia half round pipe 17.94.2 150 mm dia half round pipe 17.94.3 200mm dia half round pipe 973 17.99 Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 17.99.1 For ground floor buildings. 17.99.2 For Ground floor & Ist floor buildings. 17.99.3 Add extra for every additional floor above Ist floor. 974 17.95 Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) 975 18.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 18.6.1 Internal work - Exposed on wall 18.6.1.1 15 mm nominal outer dia Pipes. 18.6.1.2 20 mm nominal outer dia .Pipes. 18.6.1.3 25 mm nominal outer dia .Pipes. 18.6.1.4 32 mm nominal outer dia Pipes. 18.6.1.5 40 mm nominal outer dia Pipes. 18.6.1.6 50 mm nominal outer dia .Pipes. 18.6.2 Concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .Pipes. 18.6.2.2 20 mm nominal outer dia .Pipes. 18.6.2.3 25 mm nominal outer dia Pipes. 18.6.2.4 32 mm nominal outer dia Pipes. 976 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 18.7.1 15 mm nominal outer dia Pipes. 18.7.2 20 mm nominal outer dia .Pipes. 18.7.3 25 mm nominal outer dia Pipes. 18.7.4 32 mm nominal outer dia .Pipes. 18.7.5 40 mm nominal outer dia Pipes. 18.7.6 50 mm nominal outer dia .Pipes. 18.7.7 62.50 mm nominal inner dia Pipes. 18.7.8 75 mm nominal inner dia .Pipes. 18.7.9 100mm nominal inner dia .Pipes. 18.7.10 150 mm nominal inner dia Pipes. 977 18.8 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 18.8.1 Internal work - Exposed on wall 18.8.1.1 15 mm dia. nominal bore 18.8.1.2 20 mm dia. nominal bore 18.8.1.3 25 mm dia. nominal bore 18.8.1.4 32 mm dia. nominal bore 18.8.1.5 40 mm dia. nominal bore 18.8.1.6 50 mm dia. nominal bore 18.8.2 Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 18.8.2.1 15 mm dia nominal bore 18.8.2.2 20 mm dia nominal bore 18.8.3 External work : including trenching and refilling etc. 18.8.3.1 15 mm dia. nominal bore 18.8.3.2 20 mm dia. nominal bore 18.8.3.3 25 mm dia. nominal bore 18.8.3.4 32 mm dia. nominal bore 18.8.3.5 40 mm dia. nominal bore 18.8.3.6 50 mm dia. nominal bore 18.8.3.7 65 mm dia. nominal bore 18.8.3.8 80 mm dia. nominal bore 978 18.9 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) 18.9.1 Internal work - Exposed on wall 18.9.1.1 15.88 mm outer diapipe 18.9. 1.2 22.22 mm outer diapipe 18.9.1.3 28.58 mm outer diapipe 18.9.1.4 34.00 mm outer dia Pipe 18.9.1.5 42.70 mm outer dia Pipe 18.9.1.6 48.60 mm outer dia Pipe 18.9.2 Internal work - Concealed Pipe 18.9.2.1 15.88 mm outer dia .Pipes. 18.9.2.2 22.22 mm Outer diaPipes 979 18.12 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.12.1 With C.I. wheel of approved quality (screwed end) 18.12.1.1 25 mm nominal bore 18.12.1.2 32 mm nominal bore. 18.12.1.3 40 mm nominal bore 18.12.1.4 50 mm nominal bore 18.12.1.5 65 mm nominal bore 18.12.1.6 80 mm nominal bore 18.12.2 With brass lever handle of approved quality. 18.12.2.1 25 mm nominal bore 18.12.2.2 32 mm nominal bore. 18.12.2.3 40 mm nominal bore 18.12.2.4 50 mm nominal bore 980 18.13 Providing and fixing CPVC gate valve with knob of approved quality. 18.13.1 25 mm nominal bore 18.13.2 32 mm nominal bore. 18.13.3 40 mm nominal bore 18.13.4 50 mm nominal bore 981 18.14 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.14.1 15 mm nominal bore 18.14.2 20 mm nominal bore 18.14 3 25 mm nominal bore 982 18.15 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 18.15.1 25 mm nominal bore 18.15.1.1 Horizontal 18.15.1.2 Vertical 18.15.2 32 mm nominal bore 18.15.2.1 Horizontal 18.15.2.2 Vertical 18.15.3 40 mm nominal bore 18.15.3.1 Horizontal 18.15.3.2 Vertical 18.15.4 50 mm nominal bore 18.15.4.1 Horizontal 18.15.4.2 Vertical 18.15.5 65 mm nominal bore 18.15.5.1 Horizontal 18.15.5.2 Vertical 18.15.6 80 mm nominal bore 18.15.6.1 Horizontal 18.15.6.2 Vertical 983 18.16 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 18.16.1 15 mm nominal bore 18.16.2 20 mm nominal bore 18.16.3 25 mm nominal bore 984 18.17 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.17.1 30 cm length 18.17.1.1 15 mm nominal bore 18.17.1.2 20 mm nominal bore 18.17.2 45 cm length 18.17.2.1 15 mm nominal bore 18.17.2.2 20 mm nominal bore 985 18.18 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- 18.18.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.18.2 With well burnt flyash bricks of 50 kg/sqm compressive strength. 986 18.19 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design 18.19.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.19.2 With flyash bricks of 50 kg/cm2 strength 987 18.20 Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.20.1 With common burnt clay bricks of 25 kg/cm2 compressive strength. 18.20.2 With flyash bricks of 50kg/cm2 strength. 988 18.21 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.21.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.21.2 With flyash bricks of 50kg/sqm compressive strength. 989 18.22 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 18.22.1 15 mm diameter pipe. 18.22.2 20 mm diameter pipe. 18.22.3 25 mm diameter pipe. 18.22.4 32 mm diameter pipe. 18.22.5 40 mm diameter pipe. 18.22.6 50 mm diameter pipe. 990 18.23 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 18.23.1 15 mm diameter pipe. 18.23.2 20 mm diameter pipe. 18.23.3 25 mm diameter pipe 18.23.4 32 mm diameter pipe 18.23.5 40 mm diameter pipe 18.23.6 50 mm diameter pipe 991 18.24 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 18.24.1 15 mm diameter pipe 18.24.2 20 mm diameter pipe 18.24.3 25 mm diameter pipe 18.24.4 32 mm diameter pipe 18.24.5 40 mm diameter pipe 18.24.6 50 mm diameter pipe 18.24.7 65 mm diameter pipe 18.24.8 80 mm diameter pipe 992 18.25 Providing and filling sand all-round the G.I. pipes in external work. 18.25.1 15 mm diameter pipe 18.25.2 20 mm diameter pipe 18.25.3 25 mm diameter pipe 18.25.4 32 mm diameter pipe 18.25.5 40 mm diameter pipe 18.25.6 50 mm diameter pipe 18.25.7 65 mm diameter pipe 18.25.8 80 mm diameter pipe 993 18.26 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 18.26.1 15 mm nominal bore 18.26.2 20 mm nominal bore 18.26.3 25 mm nominal bore 18.26.4 32 mm nominal bore 18.26.5 40 mm nominal bore 18.26.6 50mm nominal bore 18.26.7 65mm nominal bore 18.26.8 80 mm nominal bore 994 18.27 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.27.1 15 mm nominal bore. 18.27.2 20 mm nominal bore. 18.27.3 25 mm nominal bore. 18.27.4 32 mm nominal bore. 18.27.5 40 mm nominal bore. 18.27.6 50 mm nominal bore. 18.27.7 65 mm nominal bore. 18.27.8 80 mm nominal bore. 995 18.28 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 996 18.29 Providing and fixing brass bib cock of approved quality 18.29.1 15 mm nominal bore 18.29.2 20 mm nominal bore 997 18.30 Providing and fixing brass stop cock of approved quality : 18.30.1 15 mm nominal bore 18.30.2 20 mm nominal bore 998 18.31 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. 999 18.32 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. 1000 18.33 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore 1001 18.34 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. 1002 18.35 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore 1003 18.36 Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. 1004 18.37 Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. 1005 18.38 Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. 1006 18.39 Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1007 18.40 Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1008 18.41 Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1009 18.42 Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1010 18.43 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.43.1 100 mm diameter 18.43.2 150 mm diameter 18.43.3 200 mm diameter 1011 18.44 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 18.44.1 86 mm long weighing not less than 88 gm 18.44.2 122 mm long weighing not less than 99 gm 18.44.3 165mm long weighing not less than 110 gm 18.44.4 90mm long weighing not less than 93 gm 1012 18.45 Providing and fixing PTMT stop cock of approved quality and colour. 18.45.1 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 18.45.2 20mm nominal bore, 89mm long. Weighing not less than 88 gms. 18.45.3 Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. 1013 18.46 Providing and fixing PTMT pillar cock of approved quality and colour. 18.46.1 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 18.46.2 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. 1014 18.47 Providing and fixing PTMT, push cock of approved quality and colour. 18.47.1 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 18.47.2 15 mm nominal bore, 80mm long weighing not less than 46 gms. 1015 18.48 Providing and fixing PTMT grating of approved quality and colour. 18.48.1 Circular type. 18.48.1.1 100 mm nominal dia. 18.48.1.2 125 mm nominal dia with 25 mm waste hole. 18.48.2 Rectangular type with openable circular lid. 18.48.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating. 1016 18.49 Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. 1017 18.50 Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. 1018 18.51 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.51.1 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 18.51.2 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 18.51.3 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 18.51.4 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 18.51.5 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. 1019 18.52 Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 18.52.1 30cm length. 18.52.2 45 cm length. 1020 18.53 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 18.53.1 15 mm nominal bore.Weighing not less than 32 gms. 18.53.2 20mm nominal bore.Weighing not less than 40gms. 18.53.3 25mm nominal bore.Weighing not less than 62 gms. 1021 18.54 Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 18.54.1 80 mm nominal bore 18.54.2 100 mm nominal bore 18.54.3 150 mm nominal bore 18.54.4 200 mm nominal bore 1022 18.55 Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 18.55.1 80 mm nominal bore 18.55.2 100 mm nominal bore 18.55.3 150 mm nominal bore 18.55.4 200 mm nominal bore 1023 18.56 Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. 1024 18.57 Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. 1025 18.58 Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 1026 18.59 Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. 1027 18.60 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.60.1 25 to 40 mm nominal bore 18.60.2 50 to 80 mm nominal bore 1028 18.61 Providing and fixing CP jet assembly to including connection etc complete. 1029 18.62 Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. 1030 18.63 Add extra for additional floor lift beyond 5.0M.height. 1031 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.1.1 100 mm diameter 19.1.2 150 mm diameter 19.1.3 200 mm diameter 19.1.4 230 mm diameter 19.1.5 250 mm diameter 19.1.6 300 mm diameter 1032 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 19.2.1 100 mm diameter S.W. pipe 19.2.2 150 mm diameter S.W. pipe 19.2.3 200 mm diameter S.W. pipe 19.2.4 230 mm diameter S.W. pipe 19.2.5 250 mm diameter S.W. pipe 19.2.6 300 mm diameter S.W. pipe 1033 19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 19.3.1 100 mm diameter S.W. pipe 19.3.2 150 mm diameter S.W. pipe 19.3.3 200 mm diameter S.W. pipe 19.3.4 230 mm diameter S.W. pipe 19.3.5 250 mm diameter S.W. pipe 19.3.6 300 mm diameter S.W. pipe 1034 19.4 Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 19.4.1 110 mm diameter OD (min. wall thickness 3.2mm) 19.4.2 160 mm diameter OD (min. wall thickness 4.0mm) 19.4.3 200 mm diameter OD (min. wall thickness 4.9mm) 19.4.4 250 mm diameter OD (min. wall thickness 6.2mm) 19.4.5 300 mm diameter OD (min. wall thickness 7.7mm) 1035 19.5 Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 19.5.1 110 mm diameter PVC. pipe 19.5.2 160 mm diameter PVC. pipe 19.5.3 200 mm diameter PVC. pipe 19.5.4 250 mm diameter PVC. pipe 19.5.5 300 mm diameter PVC pipe 1036 19.6 Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 19.6.1 110 mm diameter PVC. pipe 19.6.2 160 mm diameter PVC. pipe 19.6.3 200 mm diameter PVC. pipe 19.6.4 250 mm diameter PVC. Pipe 19.6.5 300 mm diameter PVC pipe 1037 19.7 Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 19.7.1 100x100 mm size P type 19.7.1.1 With well burnt bricks 19.7.1.2 With Sewer bricks conforming to IS : 4885 19.7.2 150 x 100 mm size P type. 19.7.2.1 With well burnt bricks 19.7.2.2 With sewer bricks conforming to IS : 4885 19.7.3 180x150 mm size P type 19.7.3.1 With well burnt bricks 19.7.3.2 With Sewer bricks conforming to IS : 4885 1038 19.8 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 19.8.1 100 mm dia. R.C.C. pipe 19.8.2 150 mm dia. R.C.C. pipe 19.8.3 250 mm dia. R.C.C. pipe 19.8.4 300 mm dia. R.C.C. pipe 19.8.5 450 mm dia. R.C.C. pipe 19.8.6 500 mm dia. R.C.C. pipe 19.8.7 600 mm dia. R.C.C. pipe 1039 19.9 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design 19.9.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 With well burnt bricks 19.9.1.2 With Sewer bricks conforming to IS : 4885 19.9.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 19.9.2.1 With well burnt bricks 19.9.2.2 With Sewer bricks conforming to IS : 4885 19.9.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : 19.9.3.1 With well burnt bricks 19.9.3.2 With Sewer bricks conforming to IS : 4885 1040 19.10 Extra for depth for manholes 19.10.1 Size 90x80 cm 19.10.1.1 With well burnt bricks 19.10.1.2 With Sewer bricks conforming to IS : 4885 19.10.2 Size 120x90 cm 19.10.2.1 With well burnt bricks 19.10.2.2 With Sewer bricks conforming to IS : 4885 1041 19.11 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 19.11.1 With well burnt bricks 19.11.2 With Sewer bricks conforming to IS : 4885 1042 19.12 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m 19.12.1 With well burnt bricks 19.12.2 With Sewer bricks conforming IS : 4885 1043 19.13 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) 19.13.1 With well burnt bricks 19.13.2 With Sewer bricks conforming IS : 4885 1044 19.14 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : 19.14.1 With well burnt bricks 19.14.2 With Sewer bricks conforming IS : 4885 1045 19.15 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.15.1 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 19.15.1.1 With well burnt bricks 19.15.1.2 With Sewer bricks conforming IS : 4885 1046 19.16 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : 19.16.1 With well burnt bricks 19.16.2 With Sewer bricks conforming IS : 4885 1047 19.17 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 19.17.1 With 20x20 mm square bar 19.17.2 With 20 mm diameter round bar 1048 19.18 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 1049 19.19 Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): 19.19.1 With 20x20 mm square bar 19.19.2 With 20 mm diameter round bar 1050 19.20 Supplying and fixing C.I. cover without frame for manholes : 19.20.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 19.20.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 19.20.3 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. 1051 19.21 Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality 19.21.1 Light duty D- 2.5 19.21.1.1 Rectangular shape 600x450mm internal dimensions 19.21.1.2 Square shape 450mm internal dimensions 19.21.1.3 Circular shape 450mm internal diameter 19.21.2 Medium duty - 10 19.21.2.1 Square shape 450mm internal dimension 19.21.2.2 Circular shape 500mm internal diameter 19.21.3 Heavy duty D - 20 19.21.3.1 Circular shape 560 mm internal diameter 19.21.4 Extra Heavy Duty - 35 19.21.4.1 Circular shape 560 mm internal dia. 1052 19.22 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. 1053 19.23 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 19.23.1 For pipes 100 to 230 mm diameter 19.23.2 For pipes 250 to 300 mm diameter 19.23.3 For pipes 350 to 450 mm diameter 1054 19.24 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 19.24.1 100 mm dia. sand cast iron drop connection 19.24.2 150 mm dia. sand cast iron drop connection 1055 19.25 Extra for depths beyond 60 cm of sand cast iron drop connection complete : 19.25.1 For 100 mm dia. sand cast iron drop connection 19.25.2 For 150 mm dia. sand cast iron drop connection 1056 19.26 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : 19.26.1 Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 19.26.2 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 19.26.3 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 19.26.4 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 1057 19.27 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With well burnt bricks 19.27.2 With fly ash bricks 100 key/cm2 strangth 1058 19.28 Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : 19.28.1 With well burnt bricks 19.28.2 With fly ash bricks 100 kg/cm2 strength 1059 19.29 Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : 19.29.1 With well burnt bricks 19.29.2 With fly ash bricks 100 kg/cm2 strength 1060 19.30 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.30.1 With well burnt bricks 1061 19.31 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. 1062 19.32 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 19.32.1 100 mm dia 19.32.2 150 mm dia 1063 19.33 Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.33.1 100 mm dia 19.33.2 150 mm dia 19.33.3 200 mm dia 19.33.4 230 mm dia 19.33.5 250 mm dia 19.33.6 300 mm dia 1064 19.34 Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.34.1 100 mm dia. Half round R.C.C. pipe 19.34.2 150 mm dia. Half round R.C.C. pipe 19.34.3 250 mm dia. Half round R.C.C. pipe 19.34.4 300 mm dia. Half round R.C.C. pipe 1065 19.35.1 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 19.35.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 19.35.3 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 1066 19.36 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1067 19.37 Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1068 19.38 Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. 1069 19.39 Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1070 19.40 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1071 19.41 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1072 19.42 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1073 19.43 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1074 19.44 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1075 19.45 Deduct for not providing and installing FRP/GRP manhole cover size 19.45.1 900mmx450mm (weight of cover 43.76kg ± 10%) 19.45.2 450mmx600mm (weight of cover 14.2kg ± 10%) 19.45.3 300mmx300mm (weight of cover 4.1kg ± 10%) 19.45.4 600mm (weight of cover 41.78kg ± 10%) 19.45.5 500mm (weight of cover 43.1kg ± 10%) 1076 19.46 Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 19.46.1 100 mm dia to 110 mm dia 19.46.2 150 mm dia to 160 mm dia 19.46.3 200 mm dia 19.46.4 250 mm dia 19.46.5 300 mm dia 1077 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.3 Deduct for not providing EDPM rubber/neoprene gasket all around. 1078 21.2 Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 21.2.2 Pre-laminated particle board with decorative lamination on both sides. 1079 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.3.2 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1080 21.4 Add extra for providing and fixing froasted glass instead of float glass 21.4.1 With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.4.2 With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.4.3 With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1081 21.5 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : 21.5.1 With stainless steel cover plate - minimum 1.25 mm thickness 21.5.2 With brass cover plate - minimum 1.25 mm thickness. 1082 21.6 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). 1083 21.7 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. 1084 21.8 Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : 21.8.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.8.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) 1085 21.9 Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width 1086 21.10 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators 1087 21.11 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. 1088 21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. 21.12.1 Anodized (AC 15 ) aluminium tubular handle bar 21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar. 21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. 1089 21.13 Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 1090 21.14 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). 1091 21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. 21.15.1 Anodized (AC15) aluminium 21.15.2 Powder coated minimum thickness 50 micron aluminium. 21.15.3 Polyester powder coated minimum thickness 50 micron aluminium. 1092 21.16 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge 21.16.1 Anodized (AC15 ) aluminium 21.16.2 Powder coated minimum thickness 50 micron aluminium 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. 1093 21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). 1094 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). 1095 21.19 Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1096 21.20 Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1097 21.21 Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. 1098 21.22 Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. 1099 21.24 Extra for froasted glass (with eching film) in item No. 21.22 1100 22.1 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. 1101 22.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. 1102 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) 1103 22.4 Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) 22.4.1 Serrated with central bulb (225mm wide, 8- 11mm thick). 22.4.2 Dumb bell with central bulb (180mm wide, 8mm thick). 22.4.3 Kickers (320mm wide, 5mm thick). 1104 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 1105 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. 1106 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. 1107 22.8 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. 1108 22.9 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). 1109 22.10 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). 1110 22.11 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) 1111 22.12 Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. 1112 22.13 Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. 1113 22.14 Grading roof for receiving water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) 22.14.2 Cement mortar 1:3 (1 cement : 3 sand) 22.14.3 Cement mortar 1:4 (1cement : 4 sand) 1114 22.15 Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) 1115 22.16 Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). 1116 22.17 Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). 1117 22.18 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). 1118 22.19 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) 1119 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). 1120 22.21 Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] 1121 22.22 Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) 1122 22.23 Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. 1123 22.24 Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. 1124 22.25 Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. 1125 22.26 Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. 1126 22.27 Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). 1127 22.28 Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. 1128 22.29 Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. 1129 22.30 Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge 1130 22.31 Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. 22.31.1 For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 22.31.2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 1131 22.32 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1132 22.33 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.33.1 For vertical surface two coats @ 0.70 kg per sqm 22.33.2 For horizontal surface one coat @1.10 kg per sqm. 1133 22.34 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. 1134 22.35 Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. 22.35.1 For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. 22.35.2 For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) 1135 22.36 Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1136 22.37 Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. 1137 23.11 Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. 1138 23.12 Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. 1139 23.13 Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. 1140 23.14 Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc 1141 23.15 Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. 1142 24.8 Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. 1143 24.9 Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. 24.9.1 Providing and fixing insulation with resin bonded Glass wool 24.9.2 Providing and fixing insulation with resin bonded Rock wool 1144 24.11 Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1145 24.12 Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : 24.12.1 Ridges plain (500 - 600mm). 24.12.2 Flashings/ Aprons.( Upto 600 mm) 24.12.3 North light curves. 24.12.4 Barge board (Upto 300 mm). 24.12.5 Crimp curve 24.12.6 Gutter. (600 mm over all girth). 1146 25.1 Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.1.1 White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) 25.1.2 White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) 1147 25.2 Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.2.1 Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.2.2 Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 1148 25.3 Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.3.1 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.3.2 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.3 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.4 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) 1149 25.4 Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . 25.4.1 Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.2 Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.3 Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.4 Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 1150 25.5 Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.5.1 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.2 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.3 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.4 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 1151 25.6 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.6.1 Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.6.2 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) 1152 25.7 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.7.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 1153 25.8 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.8.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 25.8.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) 1154 25.9 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.9.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) 25.9.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) 1155 25.10 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.10.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) 25.10.2 White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) 1156 25.11 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . 25.11.1 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) 25.11.2 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) 25.11.3 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) 1157 25.12 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.12.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) 25.12.2 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) 1158 25.13 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.13.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) 1159 25.14 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. 25.14.1 White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) 25.14.2 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) 1160 25.15 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) 1161 25.16 Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) 1162 25.17 Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) 1163 25.18 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) 1164 25.19 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) 1165 25.20 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) 1166 25.21 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) 1167 25.22 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) 1168 25.23 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) 1169 25.24 Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) 1170 25.25 Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1171 25.26 Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) 1172 25.27 Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1173 25.28 Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1174 25.29 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1175 25.30 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) 1176 25.31 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) 1177 25.32 Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) 1178 25.33 Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1179 25.34 Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) 1180 25.35 Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1181 25.36 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) 1182 25.37 Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) 1183 25.38 Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) 1184 25.39 Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) 1185 25.40 Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) 1186 25.41 Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) 1187 25.42 Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) 1188 25.43 Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1189 25.44 Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1190 25.45 Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) 1191 25.46 Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) 1192 25.47 Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) 1193 25.48 Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) 1194 25.49 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) 1195 25.50 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) 1196 25.51 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) 1197 25.52 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) 1198 25.53 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) 1199 25.54 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) 1200 25.55 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) 1201 25.56 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) 1202 25.57 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) 1203 25.58 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) 1204 25.59 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) 1205 25.60 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) 1206 25.61 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) 1207 25.62 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) 1208 25.63 Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) 25.63.2 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) 25.63.3 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) 25.63.4 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) 25.63.5 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) 1209 25.64 Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.64.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) 1210 25.65 Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1211 25.66 Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1212 25.67 Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.67.1 Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) 25.67.2 Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) 25.67.3 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1213 25.68 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1214 25.69 providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. 1215 25.70 Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1216 25.71 Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) 1217 25.72 Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1218 25.73 Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1219 25.74 Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1220 25.75 Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1221 25.76 Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1222 25.77 Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) 1223 25.78 Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1224 25.79 Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1225 25.80 Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1226 25.81 Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1227 25.82 Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) 1228 27.4 Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1229 27.5 Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1230 27.6 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. 1231 27.7 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. 1232 27.8 Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. 1233 27.10 Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. 1234 27.11 Extra for every additional height of 0.3 m up to height of wall 3 m 1235 28.35 Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. 1236 28.36 Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. 1237 28.37 Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. 1238 28.38 Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. 1239 29.1 Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) 29. 1.1 Upto 1 Hectare 29.1.2 1 Hectare to 2 Hectare 29.1.3 Add extra for each additional one Hectare or part there off 29.1.4 Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. 1240 29.2 Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. 1241 29.3 Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. 1242 29.4 Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). 1243 29.5 Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) 1244 29.6 Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. 29.6.1 Up to 100km (both way) 29.6.2 Add extra for distance beyond 100km and upto 150km. (both way) 29.6.3 Add extra for every additional km beyond 150km (both way) 1245 29.7 Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. 1246 29.8 Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. 1247 29.9 Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. 29.9.1 First time design work 29.9.1.1 Built up area upto 500 sqm 29.9.1.2 Built up area more than 500 sqm and upto 3000 sqm 29.9.1.3 Built up area more than 3000 sqm. 29.9.2 Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) 29.9.2.1 Plinth area upto 500 sqm 29.9.2.2 Plinth area more than 500 sqm and upto 3000 sqm 29.9.2.3 Plinth area more than 3000 sqm 1248 29.10 Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). 1249 29.11 Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Madhya Pradesh View Result →
29.
Educational and Research Institute #9775477 AOC
Tender For Purchase Of Equipments , Purchase Of Equipment , Bench Top Glass Insitu Airlift Photo Bioreactor 1. Vessel Capacity: 3 Liter Borosilicate Glass (Working Volume: Two To Three Liters Maximum), Vessel Hxd Ratio 4:1 (400X100mm) 2. Head Plate & Bottom Plate Moc: Ss 316L 3. Ports In Top Plate: Ph Sensor; Dissolved Oxygen (Do) Sensor; Pressure Sensor; Air In And Draft Tube; Air Out; Acid/Base; Sampling; And Addition Port. 4. Mixing Method: Ring Sparger To Create Airlift Circulation Inside The Reactor For Uniform Mixing And Better Aeration. 5. Holders For Sensor /Adapter / Blind Stoppers In Head Plate: Ph Sensor Holder; Media Double Inlet For Acid/Base Dosing; Air Sparger - Ring Type For Airlift Application Without Stirring, Air Out With Exhaust Filter And Open/Close Valve; Pressure Sensor Holder; Sampling Pipe; Blind Stopper For Un Used Port; Unique Suitable Ss Puncturing Needles For Sampling, Air In, Air Out, Inoculum, Feed Addition. 6. Ports In Bottom Plate With Stand: Port For Temperature Sensor; Heating Finger U-Tube Heat Exchanger; Drain. 7. Holders For Sensor / Adapter / Blind Stoppers In Bottom Plate: Holder For Temperature Sensor, Heating Finger, U-Tube Heat Exchanger. 8. Sensors: Temperature, Gel Filled Sterilizable Ph Sensor, & Pressure Sensor. 9. Controls And Display: Modular Independent System Of Ph, Temperature, Pressure With Touch Screen Graphical Display & Control; Two Set Point Control Of Ph With Three-Point Buffer Auto Calibration; Aeration By Flow Meter 0-5Lpm With Air Pump; Sterilization Controls Up To 121? Without Steam Generator Along With Pressure Safety Mechanism By Independent Pressure Sensor And Digital Display & Control; Automatic Digital Pressure Safety And Over Temperature Safety Cutoff And Alarm; Upgradable Control System For Future Prospective As Cstr Reactor & Dissolved Oxygen (Do). 10. Measurement And Control Range: Ph: 2-14; Process Temperature: 20? To 60?; Sterilization Temperature: Up To 121?; And Pressure Up To 15 Psi. 11. Fixed Speed Peristaltic Pump: For Acid/Base Dosing With Teflon Non Spring Head. (2 Nos) 12. Cooling System: Chiller Cum Circulator. Chiller Temperature Range 4? To 40?, Bath Capacity 5L To Cool Down The Reactor After Sterilization And To Work Process Temperature Below Ambient Condition. 13. Illumination System: Two Illumination Assembly With Variable Intensity Control (1000-3000 Lux) Around The Reactor With Independent Control Switch For Photobioreactor, Or Other Application And Easy Detachable If Not In Use. 14. Essential Accessories : Silicon Tubing For Acid/Base Addition (10M); Air In And Sampling (10M); Water Circulation (5M); Air Vent Filters 0.2 Micron Sterilizable (6Nos); And Silicon Septum (25Nos) 15. Starter Kit: Spare Silicon-O-Rings For Head Plate, Bottom Plate (1No Each), All Other Ports (5Nos Each), Alen Key. 16. Warranty: One Year 17. Support (Must): Unconditional Onsite Technical Support Shall Be Provided As And When Needed. The Supplier Must Provide Complete Installation And Hands-On Demonstration Of The Equipment At The User Site Upon Delivery. 18. The Vendor Should Have A Registered Presence In India With An Authorized Local Service Provider In Tamil Nadu.
Contract Date: Mar 10, 2026 Contract Value : ₹ 9.27 Lakh
Local Bodies No of Bidders 2
Tamil Nadu View Result →
30.
Housing Urban and Rular Development #9773765 AOC
Tender For 1.Renovation Of The Lpg Crematon At Kattupakkam Burial Ground In Kattupakkam Panchayat. , Design, Supply A Construction Of Cremacion Chamber Having The Innrr Dimensions Of 940Mm X I I50mm X 2350Mm And Outer Dimention Will Be I900mm X 3000Mm X 2100Mm Fabricated Out Ofheavy Duty Material & Proc Idcd With Necessary Openings For Gasous Fual Firing Through Burners And Feeding Body. The Prime Chamber Shall B¢ Constructed With 3 Layers Inner Most Will Br 1 I5mm 15-8 Quality Fire Bricks Tdalmia Stake Only ) 2Nd Layer Will Be I I Smm Hot Fécc Insulation Bricks Rajestan Make Ord Layer Will Bc75mm Cold Fsce Insulation Brick And Outer Will Be Mild Sccel Sh¢Cts Provission To With Stand Temperature And Insulation Bricks To Ensure Minimum Heat Loss. The Furnace Shall Have Ash Collection Chamber With Door Size Of 400Rnm X 3S0mm & Provision For Periodic Ash Removal. The Fñmaee Shall Have Ceramic Tiles Finishing On Che Outer Side. The Front Side Of Furnace Will Be Covered By Moving Ms Fabricated Door Lined With Insulation Bricks. Door Operation Will Be The Mororised /Manual. The Furnace Will Have The 7 Nos Of Body Resisting Cast Iron Solid Shapped Bricks. , Design Supply End Construmion Of Seconcdary Chamber For The Re-Incineration Flue Gas Haviny The Innor Sixe Of 400Mmx I 800Mmx400mm. The Secondary Chamber Shall Be Constructed With .R Lgyers Inner Most Will Be I I Smm 15-8 Quality Fire Bricks (Dalmia Make Only ) 2Nd Layer Will Be I Hmm Hot Face Insulation Bricks Rajostan Make .3Rd Layer Will Bc75mm Cold Face Insulation Brick And Outw Will B¢ Mild Stc•L Sheets Provission Tn Wi‹H Stand Iemperacurc And Insulation Bricks To Cnsurr Minimum Heat Loss. High Alumina Firt Briclcs Backked With Insulation Bricks And The Ouner Sixc Of I 400Mmx2 I00mmx700mm And The Providing Of Flue Gas Entry And Outlet , Design. Supply, Deliver And Erection Of Chimney Shall Bo Fabricated Out Of Ms Material Ol° Thick 108 Mm V Ing Loom Bonom To Top With Bonom DiarnEr Shall Noi Be Less Than I000mm And Top Diameter 324 Mm To A Height Of .30 M (Min). Deisgn Shall Conform To Is 6533 Norm And Chimney Shall Br Provided Rich Accessories Such As Ladder / Platform, Sampling Nozzle, Lightning Arrestor, Drain Plug, Bottom Door Ecc.. And Not Restricted To Only These Complete Systcm Compiving To Std Norms. 6Himn Jointing Flanee Gasket Shall Be Provided B§ Asbestos Gasket Instead Of Rubber Flange Gasket Including Testing And Commissioning Etc.. Complete.The Base Segment *Ii I The I 000Mm To 8O0mm Cone, Second Segment Will The 800Mm To 600Mm Cone. Third Scgment »‘Iil Be 600Mm To 400Mm Done. Forth Segment Will Be The 400Mm To L25mm Cone. The Final Segment Will Be The 32Smm Straight Pipe. All The Segments Length Will Be The 6000Mm. .All The Chimney Flanges Shall Be I *Mm Thick. The Base Plate Of The Chimne; Shall B 25Mm Thick Plate. , Duct Line From Cremation Chamber To Scrubbing Unit With Insulating C Refractory Cement The Outer Duot Will Be Made Out Of Mind Steel End The Inner Will Be Lined With Refractory Cement Wich The Thickness Of Fi0mm.The Outer Dia Will Be 400Mm , Supply Deli Veg And Fising Of Centrifugal Fan Should Be The 5 Hp Plot Or Of Suitable Raiing For Sucking Of Fumes From The Fumcc And Letout To Chc Chimney In Cerms Of Oiumetric Flow Kate & Pressure Hmd De Elopment. The Impeller Should Be The Stainless Steel 55-304 Grade And The 6Asiny Should Be The Stainless Steel 2 Mm Thickness.The Mob Shall Be 1S/Ss Bs Dictated By The Incinerator System Operation. , Duct Line From Scrubber To Id Fan Blower And Id Fan Blower And To The Chimney. The Duct Will Be Fvladc Out Of Mild Steel Conscruction With Flanges Of 280Rnm To S2smm Dia. , Electrical Panel Board. Back, Electrical Cables. Iring Etc.. As Directed By The Departmenul Officers.The Panel Board Will Be Capable For The Door Operation, Blower And Pump On/Off Controls, And Burner Control Operations. The Total No. Of 4 Burners Will Have Individual Control Switch For Ignition And The Common Switch For The Blower Controls.The Control Panel Will Be Death Wired With Idieny‘ Marked Umbers And The Cables For The Door Will Be The I .5 Sq Mm 1 Core Wire For Ihe Suitable Length From The Control Panel O Motor. The 4 Nos Burner Table Will The I .5 Sq.Mm 3 Core Suitable Length Ftom The Control Panel Construction Of Burners And The Motor Will Control The Limit With Limit Switches. The Fume Duct Id Blower Cable U‘Iii Be The 4Sq.Mm 3 Core Cable From Controlpanel To Fv1otor. The Control Panel Should Have The Msb. Indicating Lamps. Push Buttons. Of Off Switches, Contactors. Temperature Control Ter. Over Load Relays And Thermocouple Etc.. , Lpg Burner Seis Ufiltech/Reputed Make With Lpg Bank And Control Panel Supply Of 4Hos Of Burners With Blower And Fully Auto Control System. Lpg Fired Ignition. Flame Sensor And Auto Cut Oft Imcorgorated In A Separace Controller Equivalent To Imported Control System For Air And Lpg Ilh Auto Ignition System And Supply Of 10 Cy Linder Bank Wi‹H Pipeline Frt›M Kpg Cylinder Bacl Upto Each Burner End B Using Tata: C Class Grade Material , Supply And Fixing Of 2Hp Hiyh Presume Pump Fcr The Ficruhbiny S›Stem Uith Ater Line Connections U The Scrubbing Unit And Drain Connections To The Tank , Hi*H Pressure Enturi 6 Ct Scrubber For Entrainment Of Particulate Markers. Remoal Al Ul Soluble Emissions And Sudden Quench The Emissions. Fabricated Out Of Mild Steel. The Emissions Enier In To The Scrubber Hair Ing High- Pressure »Ater Spray, There H* EnRained Particulate Matier Is Vashed Donn Ith ^ Attr Ith The Removal Of Soluble Emissions And Also Helping In The Reduction Of Ihe Emiss Ion Temperature. This Sj Stem Is Proc Ided Uirhin Built Rfp Masons *Ater Storage Cum Circulaticin Tank. Fiecessan Po Erful Central Pump Tor 0Irculaticn Of Water A Ill Be Proided Hith Pipe! Ine , Demol Ishiny Nt Uamayed Chim Ne› . Gasi Fier Limit. Secrubber Limit. Line And C Remation Hambcr Etc... , Gst Amount For Providing Service To Government Contract Works For The Above Construction & Maintenance Works. { Gst Amount Is The Total Gst Amount For Overall Quoted Amount (Both Construction And Maintenance) Above This Row In Column Bb For All Works In This Package} (Refer Clause 13.2 & 13.3 Of Section 2 Of Instruction To Bidders (Itb) Of Sbd)
Contract Date: Mar 11, 2026 Contract Value : ₹ 51.66 Lakh
Local Bodies No of Bidders 3
Tamil Nadu View Result →
31.
Science and Technology #9769275 AOC
Bids Are Invited For Low Volume Air Sampling Pump Total Quantity : 3
Contract Date: Ref. Documents Contract Value : ₹ 5.27 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
West Bengal View Result →
Tamil Nadu View Result →
33.
Health and Family Welfare #9717516 AOC
Bids Are Invited For Supply Of Equipment And Items For Phc Kachrana Total Quantity : 2; 1 Electrical SucƟon machine with baƩery backup Housing Abs (Plastic) With Ss Back Jars 1000ml Polycarbonate Overflow Protection Mechanical Type Tubing Non-Collapsible Suction Tubing Vacuum Gauge 2.0 Inch, 0-760 Mmhg Filter Bacterial Filter Autoclavable/Reuseable Pump Type Oil Free Rocker Piston Pump Capacity 650mm Hg ± 10 At 25-30 Lpm Noise Level <50 Db A ± 3almost Whispers Motor Pmdc Power 220/230v Ac/12v Dc Backup 4 Hours Warranty 1 Year 2 Stretcher (Type-2) 1 Stretcher made of SS sheet of 1.2 mm thickness supported by tubular frame. 2 1.6 mm(16G) or better & horizontal tubes of SS 25 Outer Diameter, 1.6 mm(16G) 3 Stretcher trolley made up of vertical tubes of SS 32 Outer diameter and thickness 1.6 mm(16G) or better & horizontal tubes of SS 25 Outer Diameter, 1.6 mm(16G) 4 It shall have a pair of Stainless steel tuck down type railings made of 19 mm dia x 18G tube fitted with M.S. brackets. 5 All stainless Steel material must be 202 grades. 6 Stretcher trolley mounted on 150mm non rusting imported swiveling castor, two equipped with brakes. 7 Wheel centre having precision ball bearing to run smoothly. 8 S.S. saline rod with 12 mm dia S.S. rod shall telescope in SS socket tube. 9 Size in mm: 2030 (L) x 560 (W) x 820 (H) Approx. & Tolerance in Dimensions: +/- 10mm 10 High density PU foam mattress ILD 48 -58 (lbs/50sq.) which can be fixed to the trolley by Velcro similar mechanism. 11 Thickness- 2”(inch) 14 Provision for carrying oxygen cylinder. 15 1 Year Warranty 3 ECG Machine 1 Fully automatic, microprocessor controlled mains & battery operated. 2 Built-in 8 inch or more color LCD. 3 Built-in Ethernet port/ USB Port for data transfer. 4 Built-in wi-fi option for data transfer. 5 Resting ECG software with 12 simultaneous leads 6 Preview of 12 lead ECG prior to printout 7 ECG measurement software , incl. average complexes, measurement markers and detailed measurement results table 8 Unit should have advisory software for placement of leads 9 Unit should give lead quality assessment as to whether properly connected or improper connection 10 Unit should have Pacemaker detection 11 Unit should have sampling rate of at least 30,000 H13 Unit should have frequency range 0 Hz - 250 Hz 12 Unit Should be able to print Right precordial lead with notation 13 Should be able to print left posterior leads 14 Unit should have high-resolution A4 size thermal printer 15 Alphanumeric keyboard with rubber keys 16 Rechargeable Battery backup for at least 2 hrs 17 Built in Memory of 250 patient ECG or more 18 Unit should store at least 10 minute or more continuous ECG 19 Should have QT correction by Bazett, Fredericia, Fremingham or Hodges 20 Should be upgradeable to Culprit Artery criteria to detect probable site of occlusion. 21 ECG data transmitted to HIS. 22 Accessories to be supplied with each machine: 23 10 lead patient cable with banana plugs – 1 no. 24 Clamp & Chest Electrodes – 1 set 25 Standards/Certificate & Warranty: 26 Quoted item should be USFDA/European CE from 4 digit notified body/CE/CE Declaration of 27 conformity/BIS approved 28 Manufacturer should be ISO 13485 approved. 29 Warranty:1year 4 Fingertip Pulse Oximeter 1 inch or more in size Screen with color display to ensure easy visibility in all ambient light variation. 2 SpO2 measurement range: 30-99 %. 3 Accuracy of SpO2 measurement +/-1 for the range of 30-70% and +/- 3 for the range of 70- 99%. 4 Detection of Pulse rate range 30-240 per minute with accuracy of +/-2 pm. 5 Plethysmograph display. 6 Signal strength/ quality should be displayed on screen. 7 Audio-visual alarms fora High/low Pulse rate. A High/low SpO2. B Sensor disconnect/ failure. C Low battery. D Power failure. 8 Should have min 24 hours trend memory for PR and SpO2. 9 1 Year Warranty 5 Vertical Autoclave Chamber Type Double Wall, Single Chamber Material Inner Chamber, Outer Wall & Lid made of 202-grade Stainless Steel (Jindal Sheet) Knob Type V-Knob Brass Finish Mirror Finish Stainless Steel Valves Safety Valve, Steam Release Valve, Vacuum Release Valve Additional Components Rubber Gasket, Inner Tripod Stand, Mild Steel Legs Capacity 40 Litres Drum Size Double Drum - 9x9-2 / 11x9-2 Pressure Range 15 to 20 PSI Temperature 121°C (Standard Sterilization Temperature) Sterilization Time 15 to 30 Minutes Timer Included No Pressure Gauge Shiva Sheet Thickness Inner Sheet 0.50 mm Heating Element 2 kW Warranty 1 Year 6 Digital Thermometer Detect Method: Touchless Detect Range: 32º TO 43º C (89.6º F to 109.2ºF Basic Accuracy: ± 0.3ºC (± 0.6º F ) Optimum Measuring distance: 5cms to 10cms Response Time : < 3S Max.tolerance: 34º to 43º C ± 0.2ºC Display resolution: 0.1ºC Detect environment: 0º C to 40º C humidity ≤85% Back Light: Green and Red Auto shut down: < 7 seconds Unit Conversion (ºC/ ºF) Yes Data Hold: Yes(Memory) Low Battery Indication Yes High Temperature alarm: Yes Warranty- 1year 7 Wheel Chair 1 Foot rest Material PVC 2 Range of Seat height adjustment Fixed 3 Density of Cushion material of armrest, seat and backrest 32 kg/m3 4 Overall width in unfolded condition of wheel chair 460mm 5 Front castor 125 dia mm 6 Foldable yes 7 Overall Length 1030mm 8 Rear wheel rim material metal sheet 9 Type of braking system manual 10 Foldable yes 11 Warranty 1 Year 8 Bed Side Screen 1 Size : H 168 xW244 cms. 2 Frame work made of ERW tubular pipe 3 Supplied with spring wire and curtains 4 Pre-treated and epoxy powder coated 5 Knockdown construction 6 Warranty 1 Year 9 Examination Table with mattress and foot step Is It Portable Portable Height 830 mm Material Mild Steel Length 1920 mm Width 650 mm Seat Material Leather Foot Step with Single Foot Step Warranty 1 Year 10 Bed Side Stool Description Revolving Stool should be provided with round and pressed stainless Steel top 300 mm Dia of 18-gauge thickness. The SS top is welded on MS sheet & frame which is to be further welded on the height adjustment screw. Frame & Construction Body made from CRCA Mild Steel Frame constructed using CRCA MS pipes Pipe Size: Suitable for stool construction Pipe Thickness: 20 gauge Four-leg rigid welded construction for stability Top Material: Mild Steel (MS) Top Sheet Thickness: 24 gauge Square top design Smooth finished edges for safety Surface Finish Pre-treatment: Anti-rust chemical pre-treatment Coating: Powder coated Colour: Ivory Durable hospital-grade finish Dimensions (Converted to mm) Top Size: 12 inches × 12 inches = 305 mm × 305 mm Overall Height: 21 inches = 535 mm Design & Safety Four-leg fixed design for better balance Smooth corners to prevent injury Easy to clean and maintain Warranty 1 Year 11 Hospital Bed SS with mattress 1 Plain bed uniformly perforated 2 Easily detachable Stainless Steel Head and Foot end bows 3 Urine hooks below the bed on either sides 4 I.V. position at all the four corners of the Bed. 5 with mattress 6 1 Year Warranty 12 Bed Side Locker SS 1 Metallic, with design features for easy cleaning and disinfection. 2 Availability of drawer and a lockable compartment. 3 Height: 22.44 in. (57 cm), Overall Width : 40 cm, Depth: 40 cm Approx 4 1 Year Warranty 13 Dressing trolley SS 1 SS minimum 202 grade to be used for tubular framework & SS shelves of trolley with buff finish. 2 Size: Verticles of 31.7mmOD x 18G tube approx., Horizontal; stays of 19mmOD x18G tube approx. on all 4 sides to support SS Shelves 20 G cover with 10mm dia SS railings on all 4 sides. 3 Size: Approx 18inchLx24inch. 4 Should have Two Shelves Shelf size Approx: 750mmLx 500 mm W. It should be mounted on 125mm dia non rusting castor wheels with 2 with brakes. 5 1 Year Warranty 14 Emergency Drug Trolley/Crash Cart 1 No. Of Wheels 4 2 No. Of Drawers 3 3 Frame Material Stainless Steel 4 Number of Shelves 2 5 Surface Finish Powder Coated 6 Overall Size98(W) x 54(D) x 150(H) cm 7 Stainless Steel tubular frame work on four 12.5 cms dia. Swivel castors, two with brake, with safety buffers. 8 Three wide lockable drawers with SS front panel. 9 Six poly handout removable coloured bins. 10 Two SS shelves with guard rails and one overhead stainless steel shelf. 11 Provided with cardiac message board, Propelling handle, SS IV Pole, 5/15 AMP plug with switch, electrostatic powder coated cabinet and oxycage. 12 1 Year Warranty 15 Dressing Drum Big Type Seamless Dressing Drum, Super Deluxe Heavy Size approx 12 Diameter x 5 Height Premium Quality Medical Grade Stainless steel Usage Hospital, Clinic, Laboratory, Nursing Home Finishing Smooth & Mirror Finish Quality Compatible Size & easy to use Package Content Dressing Drum 14 x 9 Seamless in pack of 1 Warranty 1 Year 16 Dressing Drum small Type Seamless Dressing Drum, Super Deluxe Heavy Size approx 11 Diameter x 9 Height Premium Quality Medical Grade Stainless steel Usage Hospital, Clinic, Laboratory, Nursing Home Finishing Smooth & Mirror Finish Quality Compatible Size & easy to use Package Content Dressing Drum 14 x 9 Seamless in pack of 1 Warranty 1 Year 17 Instrument Trolley Frame & Construction Frame made from Stainless Steel square pipes Pipe Size: 25 mm × 25 mm (1 × 1) Thickness: 18 gauge Fully welded rigid construction for long-term hospital use Top & Shelves Shelf Material: Stainless Steel 202 Grade Sheet Thickness: 22 gauge Smooth, easy-to-clean surface with folded edges for safety Instrument Accessories Instrument Tray: Stainless Steel 202 Grade Size: 8 inches × 6 inches Detachable type with proper mounting attachment Instrument Bowl: Stainless Steel 202 Grade Diameter: 8 inches Mounted with secure SS attachment Surface Finish Fine SS finish suitable for hospital environment Corrosion-resistant and easy to maintain Castors / Wheels Castors Size: 3 inches Type: IMP (Injection Moulded Polypropylene) wheels Smooth movement with low noise operation Dimensions (Converted to mm) Overall Width: 24 inches = 610 mm Overall Depth: 18 inches = 460 mm Overall Height: 30 inches (including wheels) = 760 mm Design & Safety Rounded edges for user safety Stable structure with balanced load distribution Suitable for sterile and non-sterile areas Warranty 1 Year 18 BP Instrument 1 Power Source Battery Powered 2 Use for Arm 3 pper Arm BP Monitor Device.Features data averaging function and body movement 4 detection 5 60 Memories 6 Averaging of 3 Readings 7 Comfort Inflation Technology 8 1 Years Warranty 19 Nebulizer 1 aporizing/Misting Technology Vibrating Mesh Technology 2 Air Flow in Liter Per Minute (LPM) 5 3 Noise level (db) ≤60 4 Light Weight, Portable and Compact Yes 5 The particle size should have an MMAD (Mean Mass Aerodynamic Diameter) ≤5 6 Micrometer 7 Nebulizing Rate (ml/minute) 0.2 to 1.0 8 Minimum Pressure (Bar) for electro compressor type 1 to 1.5 9 Check Valve Yes Power Input 220-240V, 50Hz Warranty in Years (Option of 10 comprehensive warranty is available through bidding only, which if opted will 11 supersede normal warranty in the catalogue) 1 year 12 1 Years Warranty 20 Stethoscope 1 For Adult Use 2 Isi/Iso/Ce 3 1 Years Warranty 21 Examination Light 1 Brightness: 100000 2 Lux,Light Source Type: LED 3 Usage/Application: Hospital 4 Body Material: Mild Steel, 5 Light Color: White 6 No Of Leds: 18 LED 7 1 Years Warranty 22 LED Torch Special Feature Rechargeable, Colour Black Power Source Battery Powered Light Source Type LED Material Aluminium 1 Years Warranty 23 Tuning fork (256) 1 Made Up Of Mild S.S. 2 Size- Universal 3 Warranty- One Year 24 Percussion hammer 1 Made Up Of Mild S.S. 2 Size- Universal 3 Warranty- One Year 25 X-ray View Box 1 Item Weight 5 kg 2 Product Dimensions 40 x 29 x 22 cm; 5 kg 3 Item part number AEI-RK172 4 Item Height 22 Centimeters 5 Item Width 29 Centimeters 6 1 year warranty 26 Wall mounted height Measuring scale 1 Package Dimensions 66.4 x 37.2 x 12.4 cm; 2.97 k 2 tem Weight 2 kg 970 g Height Measuring Scale is a plastic body floor model without weighing scale 3 This particular measuring scale has the range of 20 - 210 cm with 1mm graduation 4 1 year warranty 27 Revolving Chair Design Adjustable Seat Height Type Adjustable Usage/Application Hospital Color Black No of Legs 5 Warranty- 1year 28 Office Table Material Type of Table Understructure: Metal Frame in combination with wooden understructure Material of Table Understructure :Mild Steel with MDF Board Availability of modesty panel :No Type of Executive Table :Executive Table Table Top Material Type: MDF Board Table Top Thickness (Tolerance ±5 mm) 25 mm Length of Table Top (Tolerance ±50 mm) 1200 mm Depth of Table Top (Tolerance ±20 mm) 600 mm Height of Table Top Adjustable :No Material Type of ERU MDF Board Width of ERU (Extended Return Unit) (Tolerance ±20 mm) 900 mm Depth of ERU (Extended Return Unit) (Tolerance ±20 mm) 450 mm Material of Door in ERU: Particle Board Availability of Keyboard Tray :No Warranty period (in number of months): 12 month 29 Office Chair Chair type Non-revolving and non-tilting chair with armrest Chair understructure type Cantilever Understructure material ERW tube conforming to IS 1161 latest The shape of tubular section of understructure Round Section Size (Diameter/Sides) of understructure 19 mm Understructure wall thickness (mm): 1.2 Castor No Seat material PU foam Warranty- 1year 30 BMW Dustbin 1 Material: Plastic 2 Color: Red, Yellow, Blue 3 Structure: Foot Pedal 4 Usage/Application: Hospital and Clinc 5 Capacity: 30 Liter 6 1 year warranty 31 Visitor Chair 1 hair Confirguration Seat only 2 Number of Seats 3 3 Availability of Armrest Yes 4 Availability of Backrest Yes 5 Seat and backrest configuration Combined seat and back Overall Length (minimum) 6 (Length indicates end-to-end measurement, including armrest, if available) 1650 mm 7 Overall Height (minimum)(floor to backrest top) 850 mm 8 Floor to Seat Height (measured from ground to front of seat) (minimum) 400 mm 9 Depth of the seat (minimum) 400 mm 10 Width of the Seat (minimum) 450 mm 11 1 year warranty
Contract Date: Ref. Documents Contract Value : ₹ 9.28 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
34.
Educational and Research Institute #9667981 AOC
Bids Are Invited For File Flat Rough Double Cut - Length 200Mm With Wooden Handle Types Of Engineers Is Files Flat Types Of Cuts Is Double Cut Grades Of Cuts Is Second , File Half Round Fine Double Cut - Length 150Mm With Wooden Handle, Types Of Engineers Files Half Round Types Of Cuts Double Cut Grades Of Cuts Second , File Round Fine Double Cut - Length 150Mm, With Wooden Handle Material Alloy Steel Types Of Engineers Files Round,Types Of Cuts Double Cut Grades Of Cuts Smooth , File Flat Fine Double Cut - Length 150Mm, With Wooden Handle Grades Of Cuts Smooth, Types Of Cuts Double Cut , File Square Fine Double Cut - Length 150Mm, With Wooden Handle Types Of Engineers Files Square , File Triangular Fine Double Cut - Length 150Mm, With Wooden Handletypes Of Cuts Double Cut, Grades Of Cuts Smooth , Scriber - Double End Scriber With Knurled Body Length 175Mm Material Iron Point Type Bold , Centre Punch - High Grade Chrome Steel Center Punch With Knurled Body Length Mm 100 , Try Square - Blade Material Stainless Steel Length Of Blade Of In Mm 150 Width Of Blade Of In Mm With Plus Minus 2 Mm Tolerance 30 , Divider Spring Joint - Length 150Mm, Material High Grade Steel Which Imparts High Strength And Corrosion Resistance Properties Wear Resistant Tip Divider Points Are Hardened 50-55 Hrc To Prevent Wear And Tear During Frequent Use , Caliper Spring Joint In-Side - Length 150Mm, Material High Grade Steel Which Imparts High Strength And Corrosion Resistance Properties , Caliper Odd Leg Spring Joint - Length 150Mm Material High Grade Steel Stainless Steel , Ball Peen Hammer - Nominal Mass Grams 220 Type Of Hammers Ball Pein Hammer , Cold Chisel Flat And Cross Cut - Length 150Mm, Types Of Coldchisel Flat Material Carbon Steel , Measuring Tape - 10M Graduation In Mm, Material Fiberglass Leathette , Engineers Rule - 300Mm Long, Stainless Steel, Heavy Duty , Pliers Combination Insulated - Combination Plier Insulated With Thick C.A. Sleeve Length 210Mm , Pliers Long Nose - Pliers Long Nose With Thick C.A. Sleeve Length 205Mm , Pliers Flat Nose - Pliers Long Nose With Thick C.A. Sleeve Length165mm , Line Tester - 500 V Heavy Duty, Overall Length 130Mm Handle Yellow , Tweezers - 10 Cm, Material Stainless-Non-Magnetic Precision , Surface Plate - 45X45 Cm, Material Granite, With Ms Stand , Oil Can - Capacity Of Oil Can In Cc 500 , Bench Vice - Jaw Width 125 , Types Of Bench Vices Fixed Base Type Of Construction Cast , Hack Saw Tubular Metal Frame Adjustable - Tubular Frame Length 12 Inch, Handle Material Plastic, Material Unhardened Steel , Snip Sheet Metal Straight Nose - Length Of Hand Tool In Mm 305Mm Type Of Insulation Plastic Insulation, Shape Of Handles Straight Handle, Shape Of Nose Straight, Material Alloy Steel , Snip Sheet Metal Curved Nose - Length 200 Mm, Material Alloy Steel, Shape Of Nose Curved , Anvil - Material Cast Steel Weight 53.3Kgs 118 Lbs. , Stakes - Types Common Square Stake, Blow Horn Stake, Beak Horn Stake, Funnel Stake, Hatchet Stake, Round Bottom Stake Size 100Mm , Wooden Mallet - 500 Gm Good Finish, Head Material Wood Handle Material Wood Item Dimensions Lxwxh 28.5 X 10 X 3 Centimeters Grip Type Non-Slip, Double Faced Hammer 30 Mm Lightweight Double Faced Hammer , Round Punch - To Punch Holeof Dia. 3Mm,4Mm,6Mm In Sheet Metal, Sent Of 3 Nos., Length Of Punch 100Mm , Electrical Drill Portable Drill With Chuck And Key - Power Source Corded Electric Maximum Rotational Speed 3000 Rpm Voltage 240V Chuck Capacity Min. Max. 1.5 To 13 Mm Included Components Drill Attachment Special Feature Forward Reverse Rotation, Variable Speed And Double Insulation. Product Dimensions 28L X 7.2W X 27.5H Centimeters Material Metal , Screw Driver Plastic Handle Flat Tip - Tip 6Mm Length 150Mm With Insulated Handle & Sleeve , Screw Driver Plastic Handle Flat Tip - Insulated Handle Tip 10Mm, Length 200Mm & 250Mm With Insulated Handle & Sleeve , Philips Screw Driver - - Screw Driver Set- It Comprises Of 6.0X0.8, 3.5X0.5, Philips 0, Square Poker, Philips 1 & Philips 2 No. Of Blades 5 , Screw Driver Plastic Handle Flat Tip - Insulated Handle Tip 3Mm, Length 100Mm To 250Mm With Insulated Handle & Sleeve , Soldering Iron Exchangeable Copper Tip - Power Source Corded Electric, Wattage 60W, 220V Powered With Ceramic Heater Core, Fast Heating 2 Minutes About . Thermostat Range 200 Degree Celc -450 Degree Celc . Thermal Soldering Iron, Adjustable Soldering Iron For Electronics Repairing With Extra 5 Iron Bits , Knife Folded Stainless Steel - Length 150Mm, Material Of Blade Hss Length Of Blade In Mm 45 Millimeter Width Of Blade In Mm 10 Millimeter Thickness Of Blades In Mm 0.4 Millimeter , Tong Tester Clamp On Multi Meter - 3-5 6 Digit, 6000 Count, Backlight Lcd T Rms Auto Ranging Ncv Flashlight For Accessing Dark Areas Data Hold Ac Voltage 0-6 60 600 750V Dc Voltage 0-6 60 600 1000V Ac Current 0-60 600A Dc Current 0-60 600A Resistance 0-600 6K 60K 600K 6M 40M Ohms Capacitance 60Nf 600Nf 6Uf 60Uf 600Uf 6Mf 30Mf Frequency 0-10 100 1K 10K 100K 1M 10Mhz Temperature -20Deg Celcius To 1000 Deg Celcius Diode & Continuity Test , Tenon Saw - 250 Mm , Firmer Chisel - 6,12,25Mm , Rawal Plug Tool - 6 Mm , D.E Spanner - Chromium Plated Size 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22, 21X23, 24X27, 25X28, 30X32 A Total Of 12 De Spanners, Material High Grade Steel Treatment Hardened And Tempered To Give Long Trouble Free Service , Ring Spanner - Chromium Plated Size 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22, 21X23, 24X27, 25X28, 30X32 A Total Of 12 De Spanners, Material High Grade Steel Treatment Hardened And Tempered To Give Long Trouble Free Service , Quick Couples Process Tube Adopter - Process Tube Adapter Kit, Adapts 4.76 Mm, 6.35 Mm, 7.94 Mm And 9.53 Mm Tubing Copper Tubing To Charging Hose. R134a Quick Couple, Easy To Operate R134a Quick Adapters 6.35 Mm Corrosion Proof For Air Conditioning Magnetic Type Quick Coupler , Tong Close Mouth And Pick - Weight 771 G Blacksmith Close Mouth Tongs, Material Steel Size 45.01 X 5.79 X 4.9 Cm , Welding Table For Gas And Arc - Table Size 1200X760, With 10Nos. Solid Refractory Blocks. Materials Ms Angle 3Inx3in Legs 4Nos., Top Plate 5Mm To 6Mm Thick , Flaring Tool Set Single Type For Tube. - Hole Size 1 2 , 7 16 , 5 16 , 1 4 , 3 16 , 3 8 , 5 8 Easy To Use Rotating Angle 45 Tilt Angle 45 Material Alloy Steel , Bending Spring External Type For Copper Tube - 3Mm To 16Mm Dia Spring Tube Bender Set, Convenient 4.76 Mm, 6.35 Mm, 7.94 Mm, 9.53 Mm, 12.7 Mm, 15.88Mm With 5Pcs Bender Springs For Soft Copper Brass Aluminum And Thin Wall Steel Tubing. Material Spring Steel, Which Is Heat Resistant, Corrosion Resistant, And Has Good Relaxation Resistance. , Pipe Cutter Miniature For Copper Tube - Small Body Suitable For Use Of Tube Dia 3Mm To 16Mm Dia -Polished Roller For Easy Rotation -Material For Body Made Of High Quality Alloy Steel -Material For Blade High Speed Steel Blade , Pinch Off Tool For Copper Tube - 6Mm To 18Mm Dia Weight 300Grams Material Stainless Steel , Ratchet Spanner - Chromium Plated Material Alloy Steel 6.4 Sq.Mm Reversible Forward And Reverse Ratchet Mechanism 1 4 X 3 16 Square X 3 8 X 5 16 Square , Capillary Plug Gauge - Capillary Gauge For Hvac , Piercing Pliers And Reversing Valve With Access Fitting - 6-18Mm, Material Alloy Steel Weight 0.44Kg Refrigerant Recovery Refrigeration Tube Locking Plier , Wrench Adjustable - Length 155Mm Least Max. Opening 19Mm Chrome Plated , Wrench Adjustable - Length 205Mm Least Max. Opening 26Mm Chrome Plated , Wrench Adjustable - Length 255Mm Least Max. Opening 30Mm Chrome Plated , Valve Key - Two-In-One Valve Key, Gas Cylinder Key 6.35Mm And 7.94Mm For Oxygen & Nitrogen Cylinders , Scissor Gasket Cutting Stainless Steel - Heavy Duty Hard High Carbon Steel Scissors With Brass Handle Length 225Mm , L-Allen Key - Allen Key Sets 9 Pcs. Set 1 .5, 2, 2.5, 3, 4, 5, 6, 8,10 , T-Allen Key Set - Size 5/32 In To 1/8 In , Pipe Cutter With Built In Reamer And Space Cutter For Copper Tube - Suitable For Copper Pipe Of Od - 3Mm To 32Mm Blade Type Tube Cutter For 9.53 Mm - 2-15.88Mm Od -The Wide-Body Has Long Rollers For Holding Pipes And A Crimp Cutting Groove, Heavy Duty , Spanner Double Ended - Chromium Plated Size In Mm 19X22, 20X22, 21X23, 24X26, 24X27, 25X28, 30X32 , Pipe Wrench - Length 350Mm Least Max Opening 48Mm , Hammer Ball Pein - Weight-450Grams, With Wooden Handle , Puller 3 Legged With Flexible Arm - Size300mm, 3 Legged With Flexible Arm , Hand Blower Portable Complete - Power Source Corded Electric Voltage 230 Volts Ac Power 620W And Airflow Of 3.5M 3 Min Anti-Vibration System Yes. -Easy To Service And Change Carbon Brush Design -Lock On Button For Constant On Convenience , Spirit Level Precision Metallic - Length 300Mm Accuracy In Mm 0.5 Mm With Magnet Material Of Bubble Tube Glass Thickness Of The Tube In Mm 1.5 Mm Name Of The Liquid Filled In The Tubeethyl Ether , Drill Twist - 1Mm To 13Mm By 1Mm, Parallel Shank, Material High Speed Steel, Set Of 25 Pieces , Taps And Dies Complete Sets 5 Types - Five Types Of Threads Are 1. Bsw Tap & Die Set 28Pc Split Dies Imperial Bsw 2. Bsf Tap And Die Set 20Pc British Standard Fine 4.76Mm To 12.7Mm Whitworth 3. Metric 40 Pcs Tap And Die Set Metric Wrench Cut M3-M12 4. Sae 40-Piece Tap And Die Set - Sae Inch Sizes 5. Bristish Association Set Of 47 Pcs Tool Steel Tap Dies From 0 To 10 Ba British Association Thread, Supplied In Wooden Box , Plumbing Hammer Weight - Plumb Bobs, Weight 200Grams , Piercing Valve - Piering Valve Diameter 6.35Mm , 7.95Mm, 9.53Mm Inlet Connection Type Flange Outlet Connection Type Flange , Measuring Tape - Tape Measuring Graduation In Mm Length 2 Metres, Tape To Be Calibrated Plastic Tape Measuring Accuracyplus Minus 0.1 , Voltmeter Ac And Dc Portable Precision Grade Digital Panel Board Type - 0 To 500 Volts,Usage Application Industrial, Ac Dc, Panel Mountable, Digital , Ammeter Ac And Dc Portable Precision Grade Digital Panel Board Type - 0 To 30 Amp, Usage Industrial, Ac Dc, Digital, Panel Mountable , Megger - Hand Driven Generator Type Insulation Tester,Megger 1000V, 2000 Mega Ohms, Metal Body , Wattmeter Multi-Range Up - 1 Kw , Multi Meter Digital Type - Fully Protected Dmm Display 3- Digits 4000 Counts Backlit Lcd Dc Voltage 0 - 400Mv 4V 40V 400V 1000V Ac Voltage 0 - 400Mv 4V 40V 400V 1000V Dc Current 0 - 400Ua 4000Ua 40Ma 400Ma 20A Dc Current 0 - 400Ua 4000Ua 40Ma 400Ma 20A Resistance 0 - 400Ohm 4Kohm 40Kohm 400Kohm 4Mohm 40Mohm Capacitance 0 - 4Nf 40Nf400nf 4Uf 40Uf 200Uf Frequency 0 - 9.999Hz 99.99Hz 999.9Hz 9.999Khz 99.99Khz 999.9Khz 9.999Mhz Diode Test And Audible Continuity Test Confirms To Cat-Iii 1000V, Cat Iv 600V, , K.W. Meter - Size 96X96mm Power Rating 100Kw , Pressure Gauge Digital Type - Measuring Range 0 To 400 Bar Case Size 2.5Inches 63Mm Case Material Abs Ip 64 Rubber Boot Silicone Rubber Ip 65 Operating Storage Temperature 14 Deg F To 122 Deg F Minus 10 Deg C To 50 Deg C Minus 4 Deg F To 167 Deg F Minus 20Deg C To 75Deg C Operation Life 1 Million Cycles Power Supply 2 X Aaa Battery 1.5V Battery Life 2 Years Auto Shut Off Mode , Compound Gauge Digital Type - Diameter 63Mm, With Recalibration Set Screw, Scale Vacuum 760Mm. Pressure 15 Kg Sq.Cm , Service Man Thermometer In Metal Case - Minus 30 Deg C To Plus110 Deg Pocket Liquid In Glass Thermometer Closed Metal Case , Gas Leak Detector For Halogen Gas - -Refrigerant Gas Leak Detection Of Cfcs, Hfcs, Hcfcs And Blends From 100 Ppm To 3000 Ppm -Visual And Audible Alarms Increase With The Refrigerant Gas Concentration , Stop Watch - Digital Type Colour Red,Black Human Interface Input Buttons Material Plastic , Vernier Caliper - Vernier Caliper With Fine Adjustment, For External, Internal & Depth Measurement, Body Material High Quality Alloy Steel Prescise Measurement Range Mm 0-250 Depth Bar Blade , Micrometer Outside - Range 0-25Mm Accuracy Plus -2 Usage Application Used For Measuring The Thickness Or Outside Diameter Of Small Parts. , Multi Meter Analogue Type - Hand Held Multimeter Dc Voltage 0 - 2.5V 10V 50V 250V 1000V Ac Voltage 0 - 10V 50V 250V 1000V Dc Current 0 - 2.5Ma 25Ma 250Ma 10A Resistance 0 - 2K 20K 2M 20Mohm Db Test -10Db To Plus62db Transistor Polarity Test And Audible Continuity Test Fuse Protection Confirms To Iec 61010, Cat-Iii 600V , Tachometer Digital Multi Range - Display Backlit Lcd Detecting Distance 50 To 500 Mm Power Source Battery Operated Battery Type Alkaline Battery Size 9V Type Of Laser Pointer Laser Pointer Data Hold Data Hold Range 1 Rpm To 99,999 Rpm Contact Test Range 2 To 20000 Rpm Non-Contact Test Range 200,000 Rpm , Micron Vacuum Gauge - Measuring Range 0-25000 Micron Vacuum Port Fitting 6.35Mm Male Flare Vacuum Accuracy 5Percentage Of Reading Response Time Instant Maximum Overpressure 500 Psi Battery Life Up To 100 Hours Power 2 Aaa Batteries Warm-Up Time Instant Operating Temperature -12 C To 50 C Self Calibration Check Yes High-Visibility Backlit Lcd Display , Sensor Thermometer Digital - Gun Type Infrared Thermometer Laser Pointer Indication To Indicate The Target Under Test. Data Hold And Auto Power Off Max Min Temperature Display Backlit Lcd Display Over Range Indication Measuring Range -50Deg Celsius To 550Deg Celsius -58Degree Fahre To 1022Degree Fahre Resolution 0.1Deg Celsius Deg Fah Accuracy Plus Or Minus2.0Perce Plus Or Minus2deg Celsius Distance To Sighting 121 Emissivity 0.95 Fixed Value Spectral Response 8 To 14Um , Fin Straightened Or Fin Comb - Coil Material Plastic Material Plastic Product Type Manual Size Standard Service Mode Manual -Special Tool For Straightening Fin Of Air Conditioner. -Sizes 8, 9, 10, 12, 14, 15 Fins Per Inch. , Feeler Gauge - 0.05 Mm - 1 Mm, Consists Of 25 Precision Blades , Wire Gauge Metric And British - Steel Plate Embossing Converse Of British & Metric , Dial Thermometer Remote Control Armored Capillary Dial - Two Stage, Remote Control, Armored Capillary Dial 75 Mm -.50 Deg. C To Plus 50Deg. C, 2 1 2 With Sensor Bulbs , Anemometer For Hvac Works - Digital Anemometer 2000 Counts Display With Backlight M S 0.4 - 30.0, Accuracy Plus Or Minus2.0 Percentage Km H 1.4 - 108.0, Accuracy Plus Or Minus2.0 Percentage Ft S 2 - 98.5, Accuracy Plus Or Minus2.0 Percentage Knots 0.8 - 58.3, Accuracy Plus Or Minus2.0 Percentage Sampling Time Approx. 0.4 Seconds , Compressors Testers For Small Hermetic Compressors - For Small Hermetic Compressors Complete With Dimmer Stat, Volt Meter, Ampere Meter, Flow Meter, Solenoid Valves Etc All Fitted On A Panel Board & Mounted On A Tubular Frame Trainer Model 240V, 50Hz,Fixed With Electrical Input Output Indicating Facilities. , Digital Thermometer - Thermometer With High And Low Alarms Built-In 110Mm Stainless Steel Sensor 1 Second Normal Temperature Sensing Time Low Battery Indication Data Hold Function Temperature Can Be Measured In Deg Celsius And Deg Fahre Range -50 To 300 -58 To 572 Resolution 0.1 To 0.2 Deg Fahre Low Battery Indication , Temperature Recorder And Humidity Capacity To Record 24 Hrs Record - Temperature And Humidity Meter With Non Contact Infra Red Thermometer Display Dual Large Backlit Lcd Built In Laser Pointer For Non Contact Temperature Measurement Switchable Between Deg Celsius Degree Fahreunits With Max And Hold Function Auto Power Off Humidity Range 5 Percentage To 95Percentage Rh Temperature Range -20 To 60Deg Celsius And -4 To 140 Degree Fahre For Non Contact Infra Red Thermometer Mode Range -50 To 500Deg Celsius -58 To 932 Degree Fahre , Instrumentation Screw Driver Set - Length -100Mm 42-Pcs Precision Screwdriver Set Repair Tool Kit For Precision Instrument , Digital Weighing Machine - Electronic Weighing Scale Rated Load Capacity Kg 100 Kg Resolution Gms 10 G Display Led Number Of Display Single Speed Of Measurement 5 Second Battery Type Rechargeable , Ac 3 Phase Motor 400V And 50 Hz - Mains Supply Three Phase Voltage 415 V Plus -10 %, 50 Hz Type Squirrel Cage Rating 1 Hp Rpm 1410 No Load Dimensions 350 W 600 D 450 H Panel 250 W 400 D 600 H Motor Mm Trainer Practically Expertises You In Exercises Like Running And Reversing, No Load Test, Block Rotor Test, Slip Measurement Etc. , Star Delta Starter Trainer Kit - Plc Based Star-Delta Starter Trainer Battery Charging Voltage 12 To 24 Vdc Power Source Electric Operating Temperature -20 To 100 Degree C Phase Single Additional Features 1. Three Phase R, Y, B Phase Voltages Are Detected By Voltage Transformers With Ground Isolation 2. All The Components Are Mounted In A Powder Coated Metal Platform , Auto Transformer Starter Trainer Kit - Power Single Phas Electric Phase Single Phase Voltage 250 Current 230 Cooling Type Air Cooling Display Analog , Direct On-Line Starter D.O.L Trainer Kit - Direct Online Motor Starter Trainer Phase Three Phase Power 2.5W Voltage 440V Current 2Amps Starter Type Dol Body Material Aluminium Ip Rating Ip65 Horse Power 4Hp , Portable Air-Lpg Brazing Kit - 2 Kg. Lpg Cylinder, Torches, Houses, Stand Weight 400G Color Black Dimensions 34.00 X 6.00 X 8.00 Cm Type Of Product Lpg Flamethrower Gun Burner 5 Nos. , Three Or Four Door Refrigerator Inverter Type - Specifications Net Total 484Litres Net Weight 97.5 Kg Cooling Type Twin Cooling Plus Capacity Net Total Liter 484 Cooling Feature No Frost Yes Cooling Type Twin Cooling Plus Freezer Feature Interior Led Light Yes Number Of Drawer 2 Ea General Feature Refrigerant R600a Compressor Digital Inverter Compressor , Core Drill Machine - Power Source Corded Electric Voltage 220 Volts Included Components Integrated Sleeve Speed 450 Rpm Item Weight 11 Kilograms Maximum Power 900 Watts Magnet Force Kgf 1350 Core Cutter Diameter Mm 12 - 38 Core Cutting Depth Mm 50 Twist Drill Diameter Mm 20 Stroke Mm 215 , Grinding Machine General Purpose D.E. Pedestal With 250 Mm - Size 10 Inch Material Cast Iron Voltage 220-240V Type Of Product Motorised Bench Grinder Power 1 Hp , Evacuating And Refrigerant Charging Station - Station Consist Of A Rotary Two Stage Vacuum Pump And Motor With Gas Ballast And Anti-Such Back B Manifold With Gauges And Valves And Capable Of Pulling Vacuum Up To 50 Microns Of Hg And With Provision Of Connecting To A Microns Level Vacuum Gauge B Graduated Charging Cylinder With Provision For Temperature Correction And All Necessary Isolating Valves , Two Stage Vacuum Pump - Double Stage, Rotary, Copper Winding Coil Voltage . 230V 50 - 60Hz. Body Material Aluminium Alloy Or Metal Max Flow Rate 283 L Min Type Monoblock Number Of Stages Double Stage Power 1 Hp Usage Application All Type Of Refrigerant Phase Single Material Copper Mounting Portable Capacity 12 Cfm Voltage 240 V Head 1 4Inches And 3 8Inches Oil Tank Capacity 700 Ml , Window Air Conditioner - Cooling Capacity1 Ton With R-22 Blend Reciprocating Compressor Condenser & Evaporator Coils Must Be Made Of Copper Compressor Winding Copper , Split Air Conditioner - 1.5 Ton With R-22 Reciprocating Compressor. Power1880 W Voltage Rating 250V Frequency 50Hz Phase Single Inverter Technology No Cooling Capacity 18000 Btu Refrigerant R22 Condenser Copper Condeneser Connecting Pipe Type Copper Connecting Pipe Length 20 M Energy Efficiency Star Rating 3 Star Main Product 1 U Indoor Unit And Outdoor Unit Accessories Remote Connecting Pipe. , Duct Able Split Air Conditioner 1.5 Ton - Power Supply 220-240V, 50Hz, 1 Ph Inverter Model Tonnage 1.5Tr Full Load Capacity 5276 Watts Full Load Power Input 1850 Watts Outdoor Compressor Type Hermetically Sealed Scroll Type Dc Inverter Rotary Motor Output 1.1 Kw Refrigerant R32 Heat Insulation Both Liquid And Gas , Recovery Unit With Cylinders - 1 Portable Self Contained Refrigerant Recovery 2 Suitable For Three Separate Recovery Unit For Cfc R12 , Hfc R134a & Hcfc R22 Refrigerants Respectively. Capacity 1 2 Hp Weight 15.5 Kg Suitable Refrigerant Category Iii, Iv , V Refrigerant R22, R134a, R404, R410a, R32 And Many More Material Plastic Body, Light Weight Type Oil-Less Compressor , Decibel Meter - Measurement Of Mechanical Noise 35 To 130 Db Resolution 0.1 Db Accuracy Plus Or Minus1.5 Db Ref 94Db 1Khz Display 0.1 Db Steps On 4-Digit Lcd Screen Microphone 0.5-Inch Electric Condenser Microphone Frequency Response From 31.5 Hz To 8 Khz , Cassette Air Conditioner - Power Supply 230V 50Hz 1 Ph Inverter Model Cooling Capacity 4500 Kcal Hr 5Kw Iseer Stars 5.2 Indoor Color Galvanised Steel Plate Airflow Rate H Hm M Ml L In Cfm 812 742 653 565 477 Sound Level H Hm M Ml L In Db 37 34.5 32 29.5 27.5 Unit Wt 22Kg Panel Wt 5.5Kg Outdoor Compressor Type Hermetically Sealed Swing Type Refrigerant R32 Refrigerant Charge 1.09 Kg Pipe Connection Liquid Flare In Mm 9.52Mm Suction Flare In Mm 15.88Mm Drain In Mm Dia 26Mm Max. Inter Unit Piping Length 30M Max. Installation Level Difference 20M , Gauge Manifold With Gauges - Different Size Of Hoses For R 134A,R22 And R 410. , Display Cabinet - 2 Ton Capacity -R-134A Eco Friendly Refrigerant -Auto Defrost Cycle In Case Of Forced Draft Cooling -Digital Temperature Control -Stainless Steel Shelves -Sliding Glass Doors -Warm Yellow Illumination -Front Toughened Glass , Water Cooler Storage Type - Refrigerant-R134a Storage Capacity-20 Litres Material Stainless Steel Weight Kg 30 Cooling Capacity L Hrs 20 Current 2 Amp Supply 240V, 50Hz, 1Ph , Water Dispenser Bubble Type Hot And Cold - 2.5 To 3Ltr. Delivery Capacity Per Hour , Ice Candy Plant - -Ice Candy Plant Test Rig -2 Ton With Capacity To Make 32 Ice Candy At A Time With Forma Tray, Stainless Steel Tank On Trolley - Agitator Motor Arrgangement For Brine Solution Circulation , Storage Type Water Cooler Hot And Cold - Type Floor Standing Function Hot, Cold And Normal Normal Water Storage Capacity In Liters Greater Than15less Thanequal To20 Cold Water Storage Capacity In Liters Greater Than5less Thanequal To10 Hot Water Storage Capacity In Liter Greater Thanequal To0.5Less Thanequal To3 Cooling Capacity In Lph Greater Than10less Thanequal To15 Heating Capacity In Lph Greater Thanequal To1less Thanequal To5 Normal Water Flow Rate In Lph 20 Water Inlet Type Plumbed In Minimum Cooling Temperature Level In Degree Celsius Greater Than15less Thanequal To18 Specify Minimum Cooling Temperature Level 15 Degree Celsius Maximum Heating Temperature Level In Degree Celsius Greater Than90less Thanequal To100 Refrigerant Type R134a Child Lock For Hot Water Faucet No Overheat Protection Yes Hot And Cold Water Ready Indicators Yes Number Of Faucets 3 Power Supply 230 V Single Phase 50 Hz Cooling Power Consumption 90 Watt Heating Power Consumption 500 Watt Main Body Material Of Dispenser Stainless Steel Material Of Cooling Water Chamber Stainless Steel Material Of Heating Chamber Stainless Steel , Visi Cooler - Gross Volume In Ltr. 220L Product Dimension Wxhxd 535 X 670 X 1390 In Mm No Of Doors 1 Refrigerant Type R134a Basket Shelves 3 Temperature Range 0Deg Celsius To 7Deg Celsius Puf Thickness 45Mm Led Light Yes Energy Efficient Compressor , Vrf Or Vrv Training Set - Vrf Air Conditioning Training Set Measurement Of Electrical Paramaters Such As Power, Voltage And Current Etc Measurements Pressure Measurements At Different Points Digital Temperature And Relative Humidity Measurements At Different Points Fault Simulator Multiple Indoor Units 3 Units Mini Heat Pump Outdoor Units 4 Hp 11,2 Kw Single Phase Floor Standing Indoor Units 5,6 Kw Wall Mounting Type Indoor Unit 3,6 Kw Ceiling Type Indoor Units 3,6 Kw On-Off Central Control Unit Up To 16 Indoor Units Multiple Remote Control , Vapour Absorption Refrigeration System - Working Medium Ammonia-Water Solution Auxiliary Gas Hydrogen Electric Heater 125W Evaporator Heater, Adjustable 50W Temperature 4X -80 Deg C To 180 Deg C Power 150W Required For Operation 230V, 50Hz, 1 Phase Total Quantity : 416
Contract Date: Ref. Documents Contract Value : ₹ 16.47 Lakh
Government Departments No of Bidders 2
Andaman And Nicobar Islands View Result →
35.
Defence #9632528 AOC
Bids Are Invited For Hp Pump Inlet Manifold - 206431 Or 100200131071 , Processor Control Unit - 102403 , Abs Service Kit - 203005A Or 132900202008 , Hp Pump Valve Kit - 206402 , Hp Pump Seal Kit - 206401 , Flow Meter - 104103 , Solenoid Valve 1 Inch F No - 100902101009 , Solenoid Valve 1 Inch Pvc 2 Way 230V - 100902111006 , Valve Plug 70 Kg - 206450 , Brine R Or W Hp Elexible Hose Xl - 101800504003 , Solenoid Valve Ve 82 Or 83 - 101014 , Solenoid Valve Ve83 - 100902101003 , Prefilter Or Filter Pump Shaft Seal - 100100103032 , O-Ring For Head Distributor Assembly - 100400101503 , Prefilter Or Filter Pump Shft Seal - 202601 , Shaft Seal Or Mechanical Seal - 100100202031 , Brine R Or W Hp Flexible Hose Xl - 702134 , Pressure Switch - 101101 , Pressure Switch - 131200351001 , E-Spare Kit Ro 1530 - 102302 , Compressed Air Regulator - 104401 , Split Pin - 202637 , Lip Seal Dt Module - 604041 , Victaulic Couplings - 204911 , Lip Seal Dt Module - 100601711001 , Rubber Hose From C Or F Outlet To Hp Pump Inlet - 702201 Or 131700701001 , Victaulic Couplings - 100803116001 , Pump Hose - 702212 , High Pressure Hose Module Inlet Or Outlet - 101800204001 , High Pressure Hose Module Inlet Or Outlet - 702112 , High Pressure Pump Driving Belt Set - 705003 , Wick Long Tab Or Wick - 206425 , Rubber Hose Fm Craft Outlet To Hp P Or P Inlet - 702221 , Hp Hose To Pt 60 - 702102 , Hp Hose Module To Smcv Or Pt 60 - 101800104001 , End Connection Hose 1 Or Lp Hose Brine And Permeate - 702224 , Cartridge Filter Element - 301016 , Seat Ring Charging Plug Or Seal Ring Charging - 100210106033 , Pre Or Filter Pump Motor Bearing Set Or Ball Bearing For Filter Pump - 131900401901 , Module Bypass Nozzle - 502261 , A Or V Mount For Hp Pump Trolly - 703212 , Vitaulic Coupler Pk 20 - 706002 , 1Or 4 F X Pu 4 Elbow Connector - 208008 , Membrane Cleaner 33 - 401103 , Membrane Solution 44 - 401104 Or 112300201001 , Membrane Cleaner 11 - 112300101001 , Membrane Cleaner 11 - 401101 , Membrane Cleaner 22 - 401102 , 1 Or 4 Mx Pu 4 Elbow Connector - 208009 , Coupler For Victaulic Coupling 1 - 706001 , Hp Pump Crank Case Oil - 402101 Or 102200201002 , Coupler For Victaulic Coupling 1 Inch - 100803116501 , Flexible Tube Pu 4 - 100802114101 , Flexible Tube Pu 9 - 100802114201 , Pu 9 Hose - 503113 , Permeate Male Elbow - 100805214201 , Pu 4 Tee - 208006 , Pu4 Hose - 503111 , Straight Connector 3 8 Inch - 100805414003 , Ss Jubliee Clip Or S Or S Jubilee Clips 1 X 30 Mm To 40 Mm - 501005 , Jubilee Clip Or S S Jubilee Clips 2 X 45 60 Mm - 501006 Or 100805314101 , Anode Plugs Zinc Anode - 206497 , O Ring For Cartridge Filter Hsg - 100400401502 Or 701111 , O Ring For Distributor Assembly Filter Head - 701101 , Dolomite - 102550108001 , O Ring Connector Or Inch O Inch Ring Hp Connection - 100601611007 , 3 Or 8M X Pu9 Elbow - 208004 , Anode Plug - 100200131501 , Dt Hp Connector - 204197 , Level Switch - 101200502011 , Mechanical Seal Pre Filter Pump Shaft Seal - 202801 , Pulsation Damper - 100210204001 , Pvc Service Kit 205 Or 305 Ro 1530 - 203005 , Seal Kit - 100200131901 , Valve Kit - 100200131902 , Conductivity Meter With Sensor Electrode Cis80 - 101200602001 , Flow Rate Transmitter - D25dn20 Epdm , Cartridge Filter Housing - 100400401001 , Hp Hose 1 Inch 1Dxvicx1500l - 101800502004 , Solenoid Valve 2 Or 2 Way 3 Or 4 Inch - 100902111005 , Pressure Switch - 101200351001 , Hp Hose 3 Or 8 Inch 1Dx1 Or 2 Inch Umfmx580l 35136 - 101800202005 , Tee 6 Mm U Nef Duplex 2205 - 100800508001 , Hp Pump Driving Belt - 131900401903 , Reducer Duplex 2205 1 Or 2 Inch Bspf X 6Mm Od Pipe - 100801106041 , Elbow Ss 316 3 Or 8 Inch Nptm X 1 Or 2 Inch Nptm - 100800302037 , Cartridge Filter - 10040101002101 , St Connector Ss 316 1 Or 2 Inch Nptm - 100801702042 , Membrane Cleaner 33 - 112300103001 , Membrane Cleaner 22 - 112300102001 , Flexible Tube - 147727 , Pvc Solvent Cement 500Ml - 102505308005 , Cartridge Filter - 100401021 , Coupling - 100100103088 , Hp Pump Inlet Hose - 10042Z9 , Hp Pump Pulley - Spa 250X3 Or 101900102126 , Lp Hose 40 Mm Bare Hose - 101700701001 , Manifold Discharge - 100200131085 , Mechanical Seal - 100100102077 , Motor Pulley - Spa112x3 Or 101900102117 , Neck Ring - 100100103036 , Oil Filler Cap - 100200131042 , Over Or Under Voltage Relay - Sm 501 Or Gic Make L And T , Pressure Gauge 0 10 Bar - 101200102001 , Pressure Guage 0 10 Bar - 101200102003 , Product Water Hose - 131700501001 , Repair Kit - 132900101003 , Repair Kit - 100100103033 , Sampling Cock Type 2 Way Size 1 Or 4 Inch Nftf With Locknut - 100920001002 , Seal Ring Charging Screw - 100210206033 , Shaft - 100100000000 , Sleeve Gasket Or O Ring - 100100103038 , Solenoid Valve Ve 83 3 Or 4 Inch - 100903111005 , Thermister Relay Ptct - 101100615201 , Dt Module New 601160 - 601169 Or 601216 Or 601216 , Valve Kit - 100200136902 , Seal Kit Or Hp Pump Seal Kit - 100200139501 , Spacer With Coil Sparing Or Spacer With Coil Springs - 100200136088 , Cable For Panel Mounted Cond Meter - 104302 , Head Dist Nozzle Set Or Nozzle Set For Frp Filter 1354 - 302602 Or 132900901007 , Level Switch - 101202 , Female Adaptor Or Hp Pump Female Adapter - 206435 , Plunger Rod - 206419 , Thermometer - 104501 , Ss Connector Pk 30 Or Connector 1 1 Or 4 Bsp M X 1 1 Or 4Vivt - 204200 , Ball Bearing - 205304 , Quick Acting Coupling - 204901 , Oil Seal Plunger Rod - 206422 , Pu4 Pvc Hose Pu4 Pipe Or Pl 4 Hose - 503114 , Neck Ring P 45 - 100100202025 Or 100100202035 , 3 Or 8 M X Pu 8 Straight Connector - 208003 , 1 Or 2 Jubilee Clips - 501002 , Support Gravel 3 0 5 0 Mm Or Sand Coarse 3 0 5 0 Mm - 302913 , Support Gravel 2 0 3 0Mm Or Sand Medium 1 5 3 0Mm Support Gravel - 302912 , Support Gravel 0 3 0 7 Mm Or Sand Fine 0 75 1 5 Mm Support Gravel - 302911 , Over Load Relay - 3Vu1340 1Mm00 Or 102542 Or 131100103102 , Spare Part Kit P32 Abs Or Abs Spare Kit D32 For Ro 1530 - 203003A Or 132900201003 , Dt Module Tool Kit - 902003 , Filter Pump Shaft Seal - 202601 , Pressure Guage 0 10 Bar 63 Dia 1 Or 4 Inch - 0-10Kg Or 104285 Or 101200102001 , V Belt Or Driving Belt Set 03 Belts In One Set - Spa1332 Or 705003 Or 131900401903 , Cartridge Filter Element - 301016 , Module Bypass Nozzle - 502261 Or 100802302002 , Membrane Cleaner 44 - 401104 , Hp Pump Crank Case Oil - 402101 , Membrane Cleaner 22 - 401102 , Membrane Cleaner 33 - 401103 , Lip Seal - 604041 , Pu 8 Or 9 Hose - 503112 Or 3 , Membrane Cleaner 11 - 401101 , Dolomite - 302921 , Hp Pump Seal Kit - 206401 , Field Mount Transmitter - Gf Signet 3 9900 1 , Flexible Pipe - Pu 8 Or 9 Total Quantity : 3984
Contract Date: Ref. Documents Contract Value : ₹ 1.68 Crore
Government Departments No of Bidders 1
Maharashtra View Result →
36.
Health and Family Welfare #9622951 Technical Bid
Tender For supply of Medicine And Other Items - 1. Anaesthetics , 1.1 General Anaesthetics And Oxygen , Halothane (6) , Isoflurane , Ketamine Injection 50 Mg/Ml , Propofol Injection 10 Mg/Ml , Thiopentone Injection 0.5 G , Sevoflurane , Liquid Medical Oxygen (Lmo) , 1.2 Local Anaesthetics , Lignocaine Ointment 5% , Lignocaine Gel Ip 2% , Lignocaine Injection 2% , Lignocaine And Adrenaline Injection 20Mg + 0.01Mg , Bupivacaine Hydrochloride In Dextrose Injection 5Mg + 80 Mg Per Ml , Bupivacaine Injection 0.50% , 1.3 Pre-Operative Medication , Atropine Sulphate Injection 0.6 Mg/Ml , Midazolam Injection Ip 1 Mg/Ml , 2. Analgesic, Antipyretic & Anti-Inflammatory Drugs , 2.1 Opioid Analgesics , Morphine Sulphate Injection Ip 10 Mg/Ml , Tramadol Capsule 50 Mg , Tramadol Injection 50 Mg/Ml , Pentazocine Injection 30 Mg/Ml , Fentanyl Citrate Injection 50 Mcg/Ml , Fentanyl Citrate Injection 50 Mcg/Ml , Naproxen Tablet Ip 500 Mg , Naproxen Tablet Ip 250 Mg , 2.2 Non-Steroidal Anti Inflammatory Drugs & Antipyretics , Aspirin Tablet Ip (Gastro-Resistant) 150 Mg , Aceclofenac And Paracetamol Tablet 100 Mg + 325 Mg , Diclofenac Gel: Diclofenac Diethylamine , Methyl Salicylate , Linseed Oil And Menthol 1.16%+10%+3%+ 5% , Diclofenac Sodium And Paracetamol Tablet 50 + 325 Mg , Diclofenac Sodium Injection - For Im And Iv 25 Mg/Ml , Diclofenac Sodium Tablet 50 Mg , Diclofenac Tablet (Sr) 100 Mg , Etoricoxib Tablet 90 Mg , Etoricoxib Tablet Ip 120 Mg , Ibuprofen And Paracetamol Tablet 400 Mg + 325 Mg , Ibuprofen Tablet 200 Mg , Ibuprofen Tablet 400 Mg , Ibuprofen Oral Suspension 100 Mg/5Ml , Indomethacin Capsule 25 Mg , Mefenamic Acid Tablet 500 Mg , Paracetamol Drops 150 Mg/Ml , Paracetamol Syrup Ip 125 Mg/5Ml , Paracetamol Tablet 500 Mg , Paracetamol Injection 150 Mg/Ml , Inj Diclofenac Sodium Aqueous 75Mg/Ml 1Ml Size, Iv & Im Use , Paracetamol Infusion Ip 1% W/V 100Ml Size , Tab. Ketorolac 10 Mg , 2.3 Muscle Relaxants , Chlorzoxazone, Diclofenac Sodium & Paracetamol Tablet 250Mg+50Mg+325 Mg , Tab Baclofen Ip 10 Mg (Each Uncoated Tablet Contains Baclofen Ip 10 Mg ) , Tab Tizanidine Hydrochloride Ip 2 Mg (Each Uncoated Tablet Contains Tizanidine Hydrochloride Ip 2 Mg) , 3. Drugs For Gout & Rheumatoid Arthritis , Allopurinol Tablet 100 Mg , Hydroxychloroquine Sulphate Tablet 200 Mg , Leflunomide Phosphate Tablet 10 Mg , Leflunomide Phosphate Tablet 20 Mg , Sulfasalazine Delayed Release Tablet 500 Mg , 4. Antiallergics & Drugs Used In Anaphylaxis , 4.1 Corticosteroids , Betamethasone Tablet 0.5 Mg , Betamethasone Sodium Phosphate Injection 4 Mg/Ml , Dexamethasone Injection 8 Mg/2Ml , Dexamethasone Tablet 0.5 Mg , Hydrocortisone Sodium Succinate Injection 100 Mg Base / Vial , Methyl Prednisolone Sodium Succinate For Injection 500 Mg , Prednisolone Tablet 5 Mg , Prednisolone Tablet 10 Mg , Prednisolone Tablet 20 Mg , Tab Dexamethasone Ip 4 Mg (Each Uncoated Tablet Contains Dexamethasone Ip 4 Mg) , 4.2 Antihistaminics & Drugs Used In Anaphylaxis , Adrenaline Injection 1 Mg/Ml , Chlorpheniramine Maleate Tablet 4 Mg , Hydroxyzine Tablet 25 Mg , Pheniramine Injection 22.75 Mg/Ml , Promethazine Syrup Ip 5 Mg/ 5Ml , Promethazine Injection 25 Mg/Ml , Promethazine Tablet 25 Mg , Anticold Syrup: Phenylephrine Hcl , Chlorpheniramine Maleate, And Paracetamol 2.5 Mg+ 1 Mg+125 Mg/5Ml , Cetirizine Syrup 5 Mg/Ml , Levoceitrizine Tablet 5Mg , Montelukast 10 Mg + Levocetrizine 5Mg Tablet , 5. Antidotes And Other Substances Used In Poisoning , Naloxone Injection Ip 0.4 Mg/Ml , Pralidoxime Chloride Injection 25 Mg/Ml , N- Acetylcystine Injection 200 Mg/Ml , 6. Anti Epileptic Drugs , Carbamazepine Tablet 200 Mg , Carbamazepine Tablet Ip 100 Mg , Carbamazepine Oral Suspension Usp 100 Mg/5 Ml , Phenobarbitone Tablet 30 Mg , Phenobarbitone Injection Ip 200 Mg/Ml , Phenytoin Injection 50 Mg/Ml , Phenytoin Oral Suspension 25 Mg/Ml , Phenytoin Tablet 100 Mg , Pregabalin Capsule Ip 75 Mg , Sodium Valproate Tablet 200 Mg , Sodium Valproate Oral Solution Ip 200 Mg/ 5 Ml , Sodium Valproate(Gastro-Resistant) Ip Tablet 500 Mg , Clobazam Tablet/Capsule 5 Mg , Clobazam Tablet/Capsule 10 Mg , Levetiracetam Tablet 500 Mg , Levetiracetam Oral Solution Suspension 100 Mg/Ml , Levetiracetam Injection 500 Mg/5Ml , Gabapentine Tablet/Capsule 100 Mg , Gabapentine Tablet/Capsule 300 Mg , Tab Lamotrigine Ip 50 Mg (Each Sustained Releasetablet Contains Lamotrigine Ip 50 Mg) , Tab Divalproex Extended Release Ip 250 Mg (Each Extended Release Film Coated Tablet Contains Divalproex Sodium Ip Equivalent To Valproic Acid 250 Mg) , Tab Oxcarbazepine Ip 150 Mg (Each Film Coated Tablet Contains Oxcarbazepine Ip 150 Mg) , Tab Lacosamide 100 Mg (Each Film Coated Tablet Contains Lacosamide 100 Mg) , Tab Topiramate Ip 25 Mg (Each Film Coated Tablet Contains Topiramate Ip 25 Mg ) , 7. Anti- Infective Drugs , 7.1 Antibacterials , 7.1.1 Aminoglycosides , Amikacin Injection 100 Mg , Amikacin Injection 250 Mg , Amikacin Injection 500 Mg , Gentamycin Injection 80 Mg/2Ml , 7.1.2 Betalactam , 7.1.2.1 Penicillins , Amoxycillin Capsule 250 Mg , Amoxycillin Capsule 500 Mg , Amoxycillin Trihydrate Dispersible Tablet 125 Mg , Amoxycillin Oral Suspension (Dry Syrup) 125 Mg/5Ml , Amoxycillin And Cloxacillin Capsule 250 Mg + 250 Mg , Amoxycillin And Potassium Clavulanate Tabs 500 Mg + 125 Mg , Amoxicillin And Clavulanic Acid Injection 600 Mg , Amoxicillin And Potassium Clavulanate Injection 1.2 Gm , Amoxycillin & Clavulanic Acid Syrup 200 Mg + 28.5 Mg / 5 Ml , Ampicillin Capsule 500 Mg , Ampicillin Injection Ip 500 Mg , Benzathine Benzylpenicillin Injection Ip12 Lac Units , Benzathine Benzylpenicillin Injection 6 Lac Units , Cloxacillin Sodium Injection 500 Mg , Piperacillin And Tazobactum For Injection 4 Gm + 500 Mg , Tab. Amoxycillin 250 Mg+Calvulanic Acid 125 Mg Ip Each Film Coated Tab Conatin Amoxycillin Trihydrate Ip 250 Mg & Potassium Clavulanate Ip 125 Mg , Inj Piperacillin 2 Gm + Tazobactom 250Mg Usp , 7.1.2.2 Cephalosporins , Cefepime Injection 500 Mg , Cefixime Tablet 100 Mg , Cefixime Tablet 200 Mg , Cefixime Oral Susp (Drops) 25 Mg/Ml , Cefoperazone And Sulbactum For Injection 1 G + 0.5 G , Cefotaxime Injection 1 G , Cefotaxime Injection 250 Mg , Cefpodoxime Dispersible Tablet 50 Mg , Ceftazidime Injection 1 G , Ceftazidime Injection 250 Mg , Ceftazidime Injection 500 Mg , Ceftriaxone Injection Ip 1 G/Vial , Ceftriaxone Injection 250 Mg , Ceftriaxone Injection Ip 500 Mg/Vial , Cefuroxime Tablet 250 Mg , Cephalexin Capsule 250 Mg , Cephalexin Capsule Ip 500 Mg , Cephalexin Oral Suspension ( Cephalexin Dry Syrup) 125 Mg/ 5Ml , Cephalexin Tablet (Dt) 125 Mg , Inj. Ceftriaxone 1 Gm + Tazobactum 125 Mg , Tab.Cefadroxil 250 Mg , Tab.Cefadroxil 500 Mg , 7.1.3 Macrolides , Azithromycin Tablet (Dt) 100 Mg , Azithromycin Tablet Ip 250 Mg , Azithromycin Tablet 500 Mg , 7.1.4 Quinolones , Ciprofloxacin Injection 200 Mg/ 100 Ml , Ciprofloxacin Tablet 250 Mg , Ciprofloxacin Tablet 500 Mg , Levofloxacin Tablet 250 Mg , Norfloxacin Tablet 400 Mg , Ofloxacin Tablet 200 Mg , Ofloxacin Suspension 50 Mg/5 Ml , Ofloxacin Injection 200Mg / 100 Ml , Ofloxacin And Ornidazole Tablet 200 Mg + 500 Mg , Ofloxacin Oral Suspension Ip (Each 5Ml Contains Ofloxacin Ip 100 Mg) 30 Ml Size , Tab. Levofloxacin Ip 500 Mg (Each Film Coated Tablet Contains Levofloxacin Hemihydrate Ip 500 Mg) , 7.1.5 Other Anti Bacterials , Aztreonam Injection 500 Mg , Clindamycin Capsule 150 Mg , Clindamycin Capsule 300 Mg , Co-Trimoxazole Oral Suspension 40 Mg + 200 Mg Per 5Ml , Co-Trimoxazole Tablet 40 Mg + 200 Mg , Co-Trimoxazole Tablet 160 Mg + 800 Mg , Doxycycline Capsule 100 Mg , Linezolid Tablet Ip 600 Mg , Linezolid Injection 200 Mg/100 Ml , Meropenem Injection 500 Mg , Meropenem Injection 1 G , Nitrofurantoin Tablet 100 Mg , Vancomycin Injection 500 Mg , Vancomycin For Intravenous Infusion Ip 1 Gm , Aztreonam 1Gm Injection , Framycetin Sulphate Cream 1% , Framycetin Sulphate Cream 1% , Tab. Faropenem Sodium 200 Mg (Each Film Tablet Contains Faropenem Sodium Equivalent To Faropenem Sodium 200 Mg) , Inj Clindamycin Phosphate Ip 300 Mg , Inj Imipenem + Cilastatin 500Mg/500Mg Ip Powder For Solution , Inj. Polymixin Sulphate B Usp 5 Lac I.U. , Inj Meropenem Ip 250 Mg , Inj Colistimethate Ip 1M Iu Powder For Solution , 7.2 Anti Amoebic , Metronidazole Injection 500 Mg/ 100 Ml , Metronidazole Benzoate Oral Suspension 100 Mg/ 5 Ml , Metronidazole Tablet 200 Mg , Metronidazole Tablet 400 Mg , Tinidazole Tablet Ip 300 Mg (Film Coated) , Tinidazole Tablet Ip 500 Mg (Film Coated) , 7.3 Anthelmintics , Albendazole Oral Suspension 400 Mg/ 10 Ml , Albendazole Tablet Ip 400 Mg , Diethylcarbamazine Tablets Ip 100 Mg , 7.4 Anti Fungals , Clotrimazole Cream Ip 2% W/W , Clotrimazole Vaginal Tablet 500 Mg , Fluconazole Tablet 150 Mg , Griseofulvin Tablets 125 Mg , Itraconazole Capsule 100 Mg , Amphotericin B Injection 50 Mg , Inj. Liposomol Amphotericine B 50 Mg , Inj. Voriconazole 200Mg/Vial , Tab. Terbinafine Hydrochloride 250 Mg , 7.5 Anti Malarials , Artisunate Injection 60 Mg (Combo Pack With 1 Ml Ampoule Of 5% Sodium Bicarbonate Injection And 5 Ml Ampoule Of 0.9% Sodium Chloride Injection) , Chloroquine Phosphate Injection 40 Mg/Ml , Chloroquine Phosphate Tablet 250Mg (=155 Mg Of Chloroquine Base) , Chloroquine Phosphate Suspension 50 Mg/ 5Ml , Mefloquine Tablet 250 Mg , Primaquine Tablet 2.5 Mg , Primaquine Tablet 7.5 Mg , Quinine Dihydrochloride Injection 300 Mg/Ml , Quinine Sulphate Tablet 300 Mg , Act Kit Containing 3 Tablet Of Artesunate (Each Tablet Of Artesunate 25Mg Strength) And 1 Tablet Of Sulphadoxine Pyremethamine (250 Mg+ 12.5 Mg) , Act Kit Containing 3 Tablet Of Artesunate (50Mg Each) And 1Tablet Of Sulphadoxine Pyremethamine (500+25) Mg , Act Kit Containing 3 Tablet Of Artesunate (100 Mg Each) And 1 Tablet Of Sulphadoxine , Pyremethamine (750 + 37.5) Mg , Act Kit Containing 3 Tablet Of Artesunate 150 Mg And 2 Tablet Of Sulphadoxine Pyremethamine (500 Mg+ 25 Mg) , Act Kit Containing 3 Tablet Of Artesunate (Each 200 Mg) And 2 Tablet Of Sulphadoxine Pyremethamine (750 + 37.5) Mg Each Or 3 Tablet Sulphadoxine Pyremethamine (500+25) Mg Each , Artemether + Leumefantrine Tablet (40 Mg And 240 Mg) , Artemether + Leumefantrine Tablet (80 Mg And 480 Mg) , 7.6 Anti Viral , Acyclovir Tablet 200 Mg , Acyclovir Tablet 800 Mg , Acyclovir Suspension 400 Mg/ 5Ml , Acyclovir Injection 250 Mg , Acyclovir Injection 500 Mg , Tab. Valganciclovir 450 Mg , Tab. Entecavir Ip 0.5 Mg (Each Film Coated Tablet Conatins Entecavir Ip 0.5 Mg) , Inj. Ganciclovir Sodium 500Mg (Lyophilized Powder For Reconstitution) , 8. Anti Neoplastic And Immuno Suppressant Drugs , Azathioprine Tablet Ip 50 Mg , Bleomycin Injection 15 Units , Chlorambucil Tablet 5 Mg , Cisplatin Injection 50 Mg/ 50 Ml , Cyclophosphamide Injection 200 Mg , Cyclophosphamide Injection Ip 500 Mg , Cyclosporin Capsule Ip 50 Mg , Cytarabine Injection 100 Mg/5 Ml , Danazol Capsule Ip 50 Mg , Daunorubicin Injection 20 Mg , Doxorubicin Injection 50 Mg/ 25 Ml , Etoposide Injection 100 Mg/ 5 Ml , Fluorouracil Injection 250 Mg/ 5 Ml , L-Asparaginase Injection 10000 Iu , Leucovorin Calcium Injection 10 Mg/Ml , Melphalan Tablet 5 Mg , Mercaptopurine Tablet Ip 50 Mg , Methotrexate Injection 50 Mg/2 Ml , Methotrexate Tablet 2.5 Mg , Paclitaxel Injection 260 Mg , Paclitaxel Injection 100 Mg , Tamoxifen Tablet 10 Mg , Vinblastine Injection 10 Mg/10 Ml , Vincristine Injection 1 Mg/Ml , Alpha Interferon Injection 3 Million Unit , Carboplatin Injection 150Mg , Carboplatin Injection 450Mg , Cisplatin Injection 10 Mg/10 Ml , Dacarbazine Injection 500 Mg Ip , Filgrastim Injection 300Mcg/Ml , Gemcitabine Injection 200 Mg , Gemcitabine Injection 1Gm , Ifosfamide Injection Ip 1Gm , Imatinib Tablet 400 Mg , Methotrexate Tablet Ip 10 Mg , Oxaliplatin Injection 50 Mg , Inj Bendamustine 100 Mg , Tab Capecitabine Ip 500 Mg (Each Film Coated Tablet Contains Capecitabine Ip 500 Mg) , Tab Letrozole Usp 2.5 Mg (Each Film Coated Tablet Contains Letrozole Usp 2.5 Mg) , Capsule Temozolomide Ip 100 Mg (Each Hard Gelatin Capsule Contains Temozolomide Ip 100Mg) , Inj. Bortezomib 2Mg , Tab Abiraterone Acetate Ip 250 Mg (Each Uncoated Tablet Contains Abiraterone Acetate Ip 250 Mg) , Cap Thalidomide Usp 100 Mg (Each Hard Gelatin Capsule Contains Thalidomide Usp 100 Mg) , Inj. Bevacizumab 400 Mg , Inj. Bevacizumab 100 Mg , Tab Cyclophosphamide Ip 50 Mg (Each Sugar Coated Tablet Contains Cyclophosphamide Ip 53.5 Mg Equivalent To Anhydrous Cyclophosphamide 50 Mg) , Tab Gefitinib Ip 250 Mg (Each Film Coated Tablet Contains Gefitinib Ip 250 Mg) , Capsule Mycophenolate Mofetil Usp 250 Mg (Each Capsule Conatin Mycophenolate Mofetil Usp 250 Mg) , Capsule Tacrolimus Ip 0.5 Mg (Each Hard Gealtin Capsule Tacrolimus Ip 0.5 Mg) , Tab. Mycophenolate Sodium 360 Mg (Each Enteric Coated Tablet Conatin Mycophenolate Sodium 360 Mg) , Tab. Bicalutamide Usp 50 Mg (Each Film Tablet Contains Bicalutamide Usp 50 Mg) , Tab. 6 Thioguanine Usp 40 Mg (Each Uncoated Tablet Contains 6 Thioguanine Usp 40 Mg) , Inj Zoledronic Acid Ip 4Mg Vial , Tab Dasatinib 100 Mg , 9. Anti Parkinsonism Drugs , Bromocriptine Mesylate Tablet 2.5 Mg , Levodopa And Carbidopa Tablet 100 Mg + 10 Mg , Levodopa And Carbidopa Tablet 250 Mg + 25Mg , Trihexyphenidyl Hydrochloride Tablet 2 Mg , 10. Drugs Affecting Blood , 10.1 Anticoagulant , Acenocoumarol Tablet 2 Mg , Enoxaparin Sodium Injection 60 Mg , Heparin Sodium Injection 5000 Iu/Ml , Warfarin Sod. Tablet 5 Mg , 10.2 Haemostatic , Ethamsylate Injection 250 Mg/ 2Ml , Tranexamic Acid Tablet 500 Mg , Vitamin K Injection 10 Mg/Ml , Tab Ethamsylate Bp 500 Mg (Each Uncoated Coated Tablet Contains Ethamsylate Bp 500 Mg) , Feracrylum 1% W/W Sterile Solution 100 Ml , Inj Tranexamic Acid Ip 100Mg/Ml 5Ml Size , 10.3 Drugs Used In Haemophilia , Dried Factor Viii Fraction (Iv Use) 250 Iu , Dried Factor Viii Fraction (Iv Use) 500 Iu , Dried Factor Viii Fraction (Iv Use) 1000 Iu , Factor - Ix Concentrate 600 Iu , Anti- Inhibitor Coagulation Complex [Human Plasma Protein With A Factor Viii Inhibitor Bypassing Activity Of 500 I.U. Per Vial 500 Iu] , Recombinant Coagulation Factor Viia - 1 Mg , Recombinant Coagulation Factor Viia - 2 Mg , Recombinant F Ix 500 Iu With Diluent , 3Rd Generation Recombinant F Viii 250 Iu With Diluent , 3Rd Generation Recombinant F Viii 1000 Iu With Diluent , 10.4 Drugs Used In Thalassaemia , Deferasirox Tablet 100 Mg , Deferasirox Tablet 500 Mg , Deferiprone Capsule 250 Mg , Deferiprone Capsule 500 Mg , Desferrioxamine Injection (For I.M. Inj And I.V., S.C. Infusion) 500 Mg , 10.5 Erythropoetins , Rh-Erythropoetin Injection 10000 Iu , Rh-Erythropoetin Injection 2000 Iu , Rh-Erythropoetin Injection 4000 Iu , 10.6 Plasma Expanders , Human Albumin Solution 20% , Hydroxyethyl Starch (130/4) 6% W/V With Sodium Chloride 0.9% W/V Intravenous Infusion , Polygeline 3.5% Solution With Electrolytes For I.V. Infusion , 11. Cardio Vascular Drugs , 11.1 Antiarrhythmic , Adenosine Injection 6 Mg/2Ml , Amiodarone Tablet 100 Mg , Amiodarone Tablet 200 Mg , Amiodarone Hydrochloride Injection 50 Mg/Ml , Verapamil Tablets Ip 40 Mg , 11.2 Thrombolytic , Streptokinase Injection 15 Lac Units , Urokinase Injection 5 Lac Unit , 11.3 Antiplatelet , Aspirin Delayed Release Tablet (Enteric Coated) 75 Mg , Clopidogrel Tablet Ip 75 Mg , Clopidogrel And Aspirin Tablet 75 Mg + 75 Mg , 11.4 Antihypertensive , Amlodipine Tablet Ip 2.5 Mg , Amlodipine Tablet 5 Mg , Atenolol Tablet 50 Mg , Atenolol Tablet 25 Mg , Diltiazem Tablet 30 Mg , Enalapril Maleate Tablet 10 Mg , Enalapril Maleate Tablet 5 Mg , Enalapril Maleate Tablet 2.5 Mg , Labetalol Tablet 100 Mg , Labetalol Hydrochloride Injection 20 Mg/ 4Ml , Lisinopril Tablet 2.5 Mg , Lisinopril Tablet 5 Mg , Lisinopril Tablet 10 Mg , Losartan Tablet 25 Mg , Losartan Tablet 50 Mg , Amlodipine And Enalapril Maleate Tablet 5 Mg +5Mg , Losartan Potassium & Amlodipine Tablet 50 Mg + 5Mg , Losartan Potassium & Hydrochlorothiazide Tablet 50 Mg + 12.5Mg , Amlodipine And Lisinopril Tablet 5Mg +5 Mg , Amlodipine And Atenolol Tablet 5 Mg +50 Mg , Methyldopa Tablet 250 Mg , Metoprolol Tablet Ip 25 Mg , Metoprolol Suscinate Tablet (Extended Release) Usp 50 Mg , Nifedipine Capsule 5 Mg , Nifedipine Tablet (Sustained Release) 10 Mg , Prazosin Tablet (Extended Release) 2.5 Mg , Propranolol Tablet 40 Mg , Ramipril Tablet / Capsule 2.5 Mg , Telmisartan Tablet Ip 40 Mg , Tab. Clonidine Hydrochloride Usp 0.1 Mg (Each Tablet Contains Clonidine Hydrochloride Usp 0.1 Mg) , Tab. Sotalol Hydrochloride Usp/Bp 40Mg (Each Film Coated Tablet Contains Sotalol Hydrochloride Usp/Bp 40Mg) , Inj. Esmolol Hydrochloride 10Mg/Ml 10Ml Size , Inj. Sodium Nitroprusside 25Mg/Ml 2Ml Size , Tab. Carvedilol 3.125 Mg , 11.5 Antianginal , Glyceryl Trinitrate Tablet 2.6 Mg , Isosorbide Dinitrate Tablet 5 Mg , Isosorbide Mononitrate Tablet 20 Mg , Nitroglycerin Injection 5 Mg/Ml , 11.6 Lipid Lowering , Atorvastatin Tablet 10 Mg , Atorvastatin Tablet 40 Mg , Fenofibrate Capsule 200 Mg , Tab Rosuvastatin Ip 20 Mg (Each Film Coated Tablet Contains Rosuvastatin Calcium Ip Equivalent To Rosuvastatin 20 Mg) , Tab Rosuvastatin 10 Mg , 11.7 Drugs Used In Heart Failure , Digoxin Injection 0.25 Mg/Ml , Digoxin Tablet 0.25 Mg , Dobutamine Injection 50 Mg/Ml , Dopamine Hydrochloride Injection 40 Mg/Ml , Isoprenaline Injection 2Mg / Ml , Tab. Sacubitril 24 Mg And Valsartan 26 Mg , 11.8 Miscellaneous , Noradrenaline Injection 2 Mg/Ml , Magnesium Sulphate Injection (50% ) 500 Mg/Ml , 12. Dental Drugs , Chlorhexidine Mouthwash Bp 0.20% , Dental Gel: Choline Salicylate + Benzalkonium + Lignocaine 8.75% , Desensitizing Tooth Gel With Sodium Mono Fluoro Phosphate & Pot. Nitrate 0.7%+ 5 % , Gum Paint Containing Tannic Acid , Cetrimide , Zinc Chloride 2%+0.1%+1% , Metronidazole And Chlorhexidine Gel 1%+ 0.25% , 13. Dermatological Drugs , 13.1 Antifungal , Miconazole Nitrate Cream 2% , Clotrimazole Mouth Paint (Clotrimazole 1% W/V) 1% , Ketoconazole Cream 2% , Powder Clotrimazole 1% W/W 30 Gm , Oint. Terbinafine 1%W/W (10 Gm Tube) , 13.2 Anti-Infective , Beclomethasone, Neomycin And Clotrimazole Cream 0.025% + 0.5% + 1% , Clindamycin Phosphate Gel Usp 1% , Fusidic Acid Cream 2% , Neomycin, Bacitracin With Sulphacetamide Powder 5Mg + 250Units + 60Mg , Olopatadine Hydrochloride Ophthalmic Solution 0.1% W/V Usp (E/D) 5Ml Size , Cream Mupirocin Usp 2% (Each Gram Contains 21.5 Mg Mupirocin Calcium Usp In A Mineral Oil Cream Base) 15 Gm Size , 13.3 Topical Steroids , Betamethasone Dipropionate Cream 0.05% , Betamethasone Lotion 0.05% , Clobetasol Cream 0.05% , 13.4 Antiviral , Acyclovir Cream 5% , 13.5 Scabicides & Pediculocides , Gamma Benzene Hexachloride Lotion(Lindane Lotion Usp) 1% , Permethrin Cream 5% , Permethrin Lotion 5% , Coal Tar 6% & Salicylic Acid 3% Onitment , 13.6 Others , Glycerin Ip 100 Ml , Glycerin Ip 400 Gm , Calamine Lotion Ip , Compound Benzoic Acid Ointment Ip Benzoic Acid 6%+ Salicylic Acid 3% , Tretenoin Cream 0.03% , 14. Reagents & Diagnostic Agents , 14.1 Blood Grouping , Anti A Blood Grouping Serum/Reagent Ip (Anti A Monoclonal Serum/Reagent) , Anti B Blood Grouping Serum/Reagent Ip (Anti B Monoclonal Serum/Reagent) , Anti D (Rh) Blood Grouping Serum/Reagent Ip (Anti D (Igm) Monoclonal Serum/Reagent) , 14.2 Dyes & Contrast Media , Diatrizoate Meglumine And Diatrizoate Sodium Inj Usp 60% (Iodine Concrete 292 Mg/Ml) 60% , Diatrizoate Meglumine And Diatrizoate Sodium Inj Usp 76%W/V (Iodine Concrete 370 Mg/Ml) 76% , Gadodiamide Injection 0.5 Mmol/Ml , Iohexol Usp (Solution For Injection) Non Ionic Contrast Medium In Sterile Aqueous Solution 350 Mg Iodine/Ml. , Iohexol ( Non Ionic Contrast Medium In Sterile Aqueous Solution) 300 Mg Iodine/Ml. , 14.3 Diagnostic , Multistix Test Strip , Vdrl Antigen (With +Ve And -Ve Control) / Rpr Slide Kit , 15. Disinfectants & Antiseptics , Cetrimide Cream Ip 0.50% , Chlorhexidine Gluconate Solution 5% , Compound Benzoin Tincture Ip , Formaldehyde Solution (34.5% - 38%) , Gentian Violet Topical Solution Usp 1% , Glutaraldehyde Solution 2% , Hydrogen Peroxide Solution 6% , Lysol (Cresol With Soap Solution) (Cresol 50% + Soap 50%) , Povidone Iodine Solution 5% , Povidone Iodine Solution 5% , Povidone Iodine Solution 10% , Povidone Iodine Scrub Solution / Cleansing Solution 7.5% W/V Povidone Iodine 7.5% , Povidone Iodine Ointment 5% , Povidone Iodine Ointment 5% , Silver Sulphadiazine Cream 1% , Silver Sulphadiazine Cream Ip 1% , Surgical Spirit Bp , Surgical Spirit Bp , 16. Diuretics , Acetazolamide Tablet 250 Mg , Furosemide Tablet 40 Mg , Furosemide Injection 10 Mg/Ml , Hydrochlorthiazide Tablet 12.5 Mg , Hydrochlorthiazide Tablet 25 Mg , Mannitol Injection 20% , Spironolactone Tablet 25 Mg , Spironolactone Tablet 50 Mg , Torsemide Tablet 10 Mg , 17. Drugs For Ear Ailments , Ciprofloxacin And Dexamethasone Ear Drops 0.3% + 0.1% , Clotrimazole 1% With Beclomethasone Dipropionate 0.025% Ear Drops , Neomycin, Polymixin B & Hydrocortisone Ear Drops/Otic Solution Usp (Neomycin Sulphate 3400 Iu, Polymixin B Sulphate 10000 Iu And Hydrocortisone 10 Mg Per Ml) , Wax Dissolving Ear Drops: Paradichlorobenzene , Benzocaine , Chlorobutanol , Turpentine Oil 2% + 2.7% + 5% + 15% , 18. Gastro Intestinal Drugs , 18.1 Antacid , Antacid Tablet , Antacid Liquid , 18.2 Anti-Ulcer , Omeprazole Capsule 20 Mg , Pantoprazole Injection 40 Mg , Pantoprazole & Domperidone Special Repair Capsule 40 Mg+ 30 Mg , Ranitidine Hcl Injection 50 Mg/2Ml , Ranitidine Tablet 150 Mg , Ranitidine Tablet 300 Mg , 18.3 Abdominal Colic & Antispasmodic , Dicyclomine Tablet 10 Mg , Dicyclomine Injection 10 Mg/Ml , Dicyclomine Hydrochloride Oral Solution Ip10 Mg/5Ml , Dicyclomine Hydrochloride And Activated Dimethicone Suspension 10Mg + 40Mg Per Ml , Dicyclomine And Paracetamol Tablet 20Mg + 325Mg , Drotaverine Tablet 40 Mg , Drotaverine Hydrochloride Injection 40 Mg/2Ml , Drotaverine & Mefenamic Acid Tablet 80 Mg + 250 Mg , Hyoscine Butylbromide Tablet 10 Mg , Hyoscine Butylbromide Injection Ip 20 Mg/Ml , 18.4 Antiemetic , Metoclopramide Injection 10 Mg/2Ml , Metoclopramide Tablet 10 Mg , Metoclopramide Syrup 5 Mg/ 5Ml , Domperidone Tablet 10 Mg , Domperidone Oral Drops Ip 10 Mg/ Ml , Domperidone Suspension 5 Mg/ 5Ml , Ondansetron Orally Disintegrating Md Tablet 4 Mg , Ondansetron Injection 2 Mg/Ml , Tab Doxylamine Succinate 20 Mg & Pyridoxine Hydrochloride 20 Mg (Each Enteric Coated Tablet Contains Doxylamine Succinate Usp 20 Mg & Pyridoxine Hydrochloride Ip 20 Mg ) , 18.5 Drugs For Constipation, Diarrhoea, Piles , Bisacodyl Tablet 5 Mg , Lactic Acid Bacillus Tablet 60 Million Spores , Lactulose Solution 10Gm/15Ml , Liquid Paraffin Ip , Liquid Paraffin Ip , Loperamide Tablet Ip 2 Mg , Ors Powder , Ointment Containing : Lidocaine 3%, Zinc Oxide 5% , Hydrocortisone 0.25%, Allantoin 0.5% , Sodium Phosphates Enema Bp , Probiotic Sachets 1 Gm Size (Each Gram Sachet Contains Saccharomyces Boulardii 250Mg & Lactic Acid Bacillus 150 Million Spores) , 18.6 Drugs For Gall Stones , Ursodeoxycholic Acid Tablet 300 Mg , 18.7 Drugs For Ulcerative Colitis , Tab. Mesalamine Usp 1.2 Gm Enteric Coated (Each Enteric Coated Prolonged Release Tablet Conatin Mesalamine Usp 1.2 Gm) , 19. Hormones, Other Endocrine Drugs , 19.1 Antidiabetics , Biphasic Isophane Insulin Injection 30 / 70 (30% Soluble Insulin & 70% Isophane Insulin) 40 Iu / Ml , Isophane Insulin Injection 40 Iu / Ml , Soluble Insulin Injection 40 Iu / Ml , Glibenclamide Tablet 5 Mg , Gliclazide Tablets Ip 40 Mg , Glimepiride Tablet 2 Mg , Glimepiride Tablet 1 Mg , Glipizide Tablet Ip 5 Mg , Metformin Tablet 500 Mg , Pioglitazone Tablet Ip 15 Mg , Metformin Hydrochloride Special Repair Tablet 1000 Mg , Glipizide And Metformin Hydrochloride Tablet 5 Mg + 500 Mg , Glibenclamide And Metformin Hydrochloride (Sr) Tablet 5 Mg + 500 Mg , Metformin Hydrochloride (Sr) And Glimepiride Tablet 500 Mg + 1 Mg , Metformin Hydrochloride (Sustained Release) And Glimepiride Tablet 500 Mg + 2 Mg , Glimepiride, Pioglitazone And Metformin Hydrochloride (Sr) Tablet 2Mg + 15Mg + 500Mg , Gliclazide And Metformin Tablet 80 Mg + 500 Mg , Insulin Glargine 100 Iu/Ml With 15 Insulin Syringes And Needles/Cartridge 100 Iu/Ml With 15 Needles And 1 Pen Per 20 Cartridges , Insulin Glargine 100 Iu/Ml With 30 Insulin Syringes With Needle , Tenaligliptin Tablet 20 Mg , 19.2 Female Hormonal Preparations , Carboprost Tromethamine Injection 0.25 Mg/Ml , Clomiphene Tablet Ip 25 Mg , Clomiphene Tablet 50 Mg , Conjugated Estrogen Tablet 0.625 Mg , Dinoprostone Cream 0.5 Mg , Ethinyloestradiol Tablet Ip 50 Mcg , Hydroxyprogesterone Injection 250 Mg/Ml , Norethisterone Tablet 5 Mg , Progesterone Injection 200 Mg /2Ml , Medroxyprogesterone Acetate Tablet Ip 10 Mg , 19.3 Thyroid & Anti-Thyroid , Carbimazole Tablet 5 Mg , Thyroxine Sodium Tablet 100 Mcg , Thyroxine Sodium Tablets Ip 50 Mcg , 19.4 Others , Glucagon For Injection Usp 1 Mg , Octreotide Injection 50 Mcg/Ml , 20. Immunologicals , 20.1 Anti D Immunoglobulin , Human Anti D Immunoglobulin Injection (Im Use) 300 Mcg , Human Anti D Immunoglobulin 150 Mcg , 20.2 Anti Rabies & Anti Snake Venum , Human Rabies Immunoglobulin Injection 150 Iu/Ml , Rabies Vaccine Human (Cell Culture) (Intradermal) 2.5 Iu , Rabies Vaccine Human (Cell Culture) (Intramuscular) 2.5 Iu/ Dose , Rabies Antiserum Ip (Equine) (I.M./Sc Use) 300 Units / Ml , Snake Venom Anti Serum (Polyvalent Anti Snake Venom) Lyophillized , 20.3 Others , Normal Human Intravenous Immunoglobulin 5G/100Ml , Tetanus Immunoglobulin 250 Iu , Tetanus Vaccine (Adsorbed) Ip , Diphtheria Antitoxin 10,000 Iu , Inj. Hepatitis B Immunologlobin Ip 200 I.U , Inj. Human Immunologlobin 12%Igm, 12%Iga &76% Igg 10 Ml(0.5 Gm) , 21. Neuromuscular Blockers & Cholinesterase Inhibitors , Atracurium Injection 10 Mg/Ml , Glycopyrrolate Injection 0.2 Mg/Ml , Neostigmine Injection Ip 0.5 Mg/Ml , Neostigmine Injection 2.5 Mg/5Ml , Succinylcholine Injection 50 Mg/Ml , Valethamate Bromide Injection 8 Mg/Ml , Vecuronium Bromide For Injection 4 Mg (Freeze Dried) , Inj. Cis Atracurium Besylate 2 Mg/Ml In 5 Ml Vial , 22. Ophthalmological Preparations , 22.1 Anti Fungal , Fluconazole Eye Drops 0.3% , Acyclovir Eye Ointment Ip 3% W/W 5Gm Size , 22.2 Anti Inflammatory , Flurbiprofen Sodium Ophthalmic Solution 0.03% , 22.3 Anti Glaucoma , Betaxolol Eye Drops 0.50% , Brimonidine Tartrate And Timolol Eye Drops 0.15% + 0.5% , Timolol Eye Drops 0.50% , Travoprost Ophthalmic Solution 0.004% , 22.4 Pupillary Dialators/Constrictors , Atropine Eye Ointment 1% , Atropine Sulphate Ophthalmic Solution Usp 1% , Homatropine Eye Drops 2% , Tropicamide Eye Drops 1% , 22.5 Antibiotic , Chloramphenicol Eye Drops 0.05% , Ciprofloxacin Eye Drops 0.30% , Ciprofloxacin Ophthalmic Ointment 0.30% , Tobramycin And Dexamethasone Ophthalmic Suspension 0.30%+0.10% , Tobramycin Eye Drops 0.30% , Tobramycin Ophthalmic Ointment 0.30% , Eye Drop Moxifloxacin 0.5% W/V Ophthalmic Solution Ip 5Ml Size , Chloramphenicol 1% W/W Eye Ointment Ip, 3Gm Size , 22.6 Local Anaesthetic , Lidocaine Hydrochloride Topical Solution Usp 4% , 22.7 Others , Carboxymethylcellulose Sodium Lubricant Eye Drops 0.50% , Hyaluronidase Injection 1500 Iu , Hydroxypropylmethyl Cellulose Solution With Prefilled Glass Syringe With Cannula 20 Mg/Ml , 23. Drugs Acting On Uterus , Isoxsuprine Injection 5 Mg/Ml , Isoxsuprine Tablet 20 Mg , Methylergometrine Injection 0.2 Mg/Ml , Methylergometrine Tablet Ip 0.125 Mg , Misoprostol Tablet 200 Mcg , Mifepristone Tablet 200 Mg , Oxytocin Injection 5 Iu/Ml , Natural Micronised Progesteron Soft Gelatin Capsule 200 Mg (Each Soft Gelatin Capsule Contains Progesteron Ip 200 Mg) , Tab Cabergoline Ip 0.5Mg (Each Uncoated Coated Tablet Contains Cabergoline Ip 0.5Mg) , Inj Human Chorionic Gonadotropin Ip 5000 I.U. , Leurprolide Acetate Depot 3.75 Mg , Leurprolide Acetate Depot 11.25 Mg , 24. Psychotropic Drugs , 24.1 Anti Psychotics , Chloridazepoxide Tablets Ip 10 Mg , Chlorpromazine Tablets Ip 100 Mg , Chlorpromazine Tablets Ip 25 Mg , Chlorpromazine Tablets Ip 50 Mg , Haloperidol Injection 5 Mg/Ml , Haloperidol Tablet 1.5 Mg , Haloperidol Tablet 5 Mg , Olanzapine Tablet 5 Mg , Risperidone Tablet 2 Mg , Risperidone Tablet 1 Mg , Trifluperazine Tablets Ip 5 Mg , Quetiapine Tablet Ip 50 Mg , Quetiapine Tablet Ip 25 Mg , Tab. Levosulpiride 25 Mg (Each Uncoated Tablet Contains Levosulpiride 25 Mg) , 24.2 Anti Depressants , Amitriptyline Tablets Ip 25 Mg , Escitalopram Tablets Ip 10 Mg , Fluoxetine Capsule Ip 20 Mg , Imipramine Tablet 25 Mg , Imipramine Tablet 75 Mg , Lithium Carbonate Tablet 300 Mg , Sertraline Tablet 50 Mg , 24.3 Sedatives & Tranquilizers , Alprazolam Tablet 0.25 Mg , Alprazolam Tablet 0.5 Mg , Clonazepam Tablet 0.5 Mg , Diazepam Injection 10 Mg/ 2Ml , Diazepam Tablet 5 Mg , Lorazepam Injection 2 Mg/Ml , Tab. Lorazepam Ip 2 Mg (Each Uncoated Tablet Contains Lorazepam Ip 2 Mg ) , Tab. Zolpidem 5 Mg , 25. Drugs Acting On The Respiratory Tract , 25.1 Anti Asthmatic , Aminophylline Injection 25 Mg/Ml , Beclomethasone Inhalation 200 Mcg/ Dose , Budesonide Nebulizer Suspension 0.25 Mg/Ml , Budesonide Rotacap 200 Mcg , Ipratropium Bromide Nebulizer Solution 250 Mcg/Ml , Ipratropium Rotacap 40 Mcg , Salbutamol Tablet 4 Mg , Salbutamol Inhalation 100 Mcg/ Dose , Salbutamol Nebuliser Solution 5 Mg/Ml , Salbutamol Tablet 2 Mg , Salbutamol Syrup Ip 2 Mg/5Ml , Terbutaline Sulphate Tablet Ip 2.5 Mg , Theophylline And Etophylline Injection 50.6Mg + 169.4Mg , Theophylline And Etophylline Tablet Ip (Theophylline Ip 23Mg + Etophylline Ip Mg) , Theophylline Tablet (Sr) 400 Mg , Formoterol & Budesonide Rotacap 6 Mcg+ 200 Mcg , Tab. Acebrophylline 100 Mg , 25.2 Antitussives , Dextromethorphan Hydrobromide Syrup 13.5 Mg/ 5Ml , Cough Syrup/ Expectorant (Ambroxol Hydrochloride Ip 15 Mg, Terbutaline Sulphate Ip 1.5 Mg, Guaiphenesin Ip 50 Mg, Menthol Ip 1 Mg , 25.3 Local Decongestant , Saline Nasal Solution (Drops) 0.65% , Xylometazoline Nasal Drops 0.1% , 26. Solutions Correcting Water, Electrolyte & Acid Base Disturbance , Compound Sodium Lactate Injection , Dextrose Injection 25% , Dextrose Injection 10% , Dextrose Injection 5% , Multiple Electrolytes & Dextrose Injection Type I Ip (Electrolyte P Injection ) , Multiple Electrolytes & Dextrose Injection Type Iii Ip (Electrolyte M Injection) , Potassium Chloride Inj. Ip 0.15 Gm/Ml , Potassium Chloride Oral Solution Usp 500 Mg/ 5Ml , Sodium Chloride And Dextrose Injection 0.9 % + 5 % , Sodium Chloride Injection , Sodium Chloride Injection , Ringer Acetate Infusion 500 Ml , Sodium Chloride 0.45% W/V Polypack 500 Ml , 27.Drugs For Urology , Finasteride Tablet 5 Mg , Tamsulosin Hcl Tablet 0.4 Mg , Flavoxate Tablet 200 Mg , Tab Savelamer Carbonate 400 Mg (Each Film Coated Tablet Contains Savelamer Carbonate 400 Mg) , Tab Sodium Bicarbonate Usp 1 Gm (Each Film Coated Tablet Contains Sodium Bicarbonate Usp 1 Gm) , Tab Levamisol Hydrochloride Ip 50 Mg (Each Uncoated Tablet Conatin Levamisol Hydrochloride Ip 50 Mg) , Tab. Dutasteride 0.5 Mg , Syrup/Solution Alkylizer 1.4 Gm-1.53 Gm Per 5 Ml (Disodium Hydrogen Citrate) , 28.Antivertigo , Betahistine Tablet Ip 8 Mg , Betahistine Tablet Ip 16 Mg , Cinnarizine Tablet Ip 25 Mg , Cinnarizine Tablet Ip 75 Mg , 29. Vitamins & Minerals , Ascorbic Acid Tablet 500 Mg , Calcium Gluconate Injection 10% , Calcium & Vitamin D3 Tablet 500 Mg + 250 Iu , Calcium & Vitamin D3 Suspension(Each 5 Ml Contains Calcium Carbonate Equivalentvto Elemental Calcium 250 Mg + Vitamin D3 -125 Iu) , Calcitriol Capsule 0.25 Mcg , Cholecalciferol Granules 60,000 Iu /1Gm , Ferrous Sulphate And Folic Acid Tablet 100 Mg + 0.5 Mg , Ferrous Sulphate With Folic Acid Tab.(Paediatric) 20 Mg + 0.1 Mg , Folic Acid Tablet Ip 5 Mg , Iron And Folic Acid Flavoured Syrup Ip Each 5 Ml Of Syrup Contains Ferrous Sulphate Ip Equivalent To Elemental Ferrous Iron 20 Mg, Folic Acid Ip 0.1Mg With Any Flavour , Iron Sucrose Injection 20 Mg/Ml Usp/Bp 20 Mg/Ml (For Iv Use) Each Ml Contain : Ferric Hydroxide In Comples With Sucrose Equivalent To Elemental Iron 20 Mg , Mecobalamin Injection 500 Mcg/Ml , Multivitamin Drops Each Ml Contains Vit-A-3000 Iu, Vit D3- 300Iu, Vit-B 1-1Mg, Riboflavine Phosphate Sodium- 2 Mg, D- Pantenol- 2.5 Mg, Niacinamide - 10 Mg, Pyridoxine Hcl - 1 Mg, Cyanocobalamin 1 Mcg, Lysine Hcl 10 Mg , Multivitamin Tablets Nfi Formula Sugar Coated.Vit A 2500 Iu , Pyridoxine Tablet 40 Mg , Thiamine Tablet 100 Mg , Vitamin A Solution 1 Lac Iu/Ml , Vitamin B Complex Tablet Nfi (Prophylactic) , Vitamin B Complex Injection Nfi , Zinc Sulphate Dispersible Ip Elemental Tablet 10 Mg , Methylcobalmin Tablet 500 Mcg , Methylcobalmin Tablet 1500 Mcg , Methylcobalmin Tablet 1500 Mcg , Inj. Ferric Carboxymaltose 50 Mg/Ml 10 Ml Size , Multi Vitamin Syrup (Each 5Ml Contains :- Vitamin A 400 Mcg, Vitamin B1 0.7 Mg, Vitamin B2 0.75 Mg, Vitamin B3 7.5 Mg, Vitamin B5 1.25 Mg, Vitamin B6 0.5 Mg, Vitamin B12 0.5Mcg, Vitamin D/ Vitamin D2/ Vitamin D3 100 Iu, Vitamin E 2.25 Mg) , 30. Miscellaneous Drugs , Flunarizine Tablet 5 Mg , Black Disinfectant Fluid (Phenyl) , (As Per Schedule O Grade - Iii , Concentrated Solution For Haemodialysis B.P Acetate Concentrate In 10 Litre Cans , Concentrated Solution For Hameodialysis Bp Sodium Hydrogen Carbonate Concentrate , Peritonial Dialysis Solution Ip , Sodium Bicarbonate Injection Ip 7.5% , Water For Injection Ip , Alendronate Sodium Tablets Usp/Bp 35 Mg , Mannitol With Glycerin Injection 10% + 10% , Surfactant For Intratrecheal Instillation(Natural Bovine Lung Surfactant) , Oseltamivir 75 Mg Capsule (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 75 Mg ) , Oseltamivir 45 Mg Capsule (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 45 Mg ) , Oseltamivir 30 Mg Capsule (Each Capsule Contains Oseltamivir Phosphate Equivalent To Oseltamivir 30 Mg ) , Oseltamivir Syrup Oseltamivir Phosphate For Oral Suspension 12 Mg/Ml. (Each Ml Contains 12 Mg Oseltamivir Base After Reconstitution) , Vitamin K-1 (Phytomenadione) 1 Mg/0.5Ml Injection , Intravenous Fat Emulsion 20% W/V (Pl/Tg Ratio 0.06) 250Ml , Tab Pyridostigmine Usp 60 Mg (Each Tablet Contains Pyridostigmine Usp 60 Mg ) , Inj. Caffeine Citrate Usp 20Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml) 3Ml Size , Inj. Amino Acid 10% 100Ml Size , Vitamin E Soft Gelatin 400 Mg Capsule , Inj Poractant Alpha 80 Mg/Ml In Pack Of 1.5 Ml , Essential Surgicals List , Absorbable Gelatin Sponge Ip 66, Size 80(+-10) Mm X 50 Mm X 10 Mm Should Be Sterlized. , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set / Blood Transfusion Set • Sharp And Easy Piercing Spike Suitable For Blood Bags And Standard Blood Containers • Transparent Cylindrical Drip Chamber With Filter.Filter Size Should Be 200+20 Micrometer. • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Transfusion Rate • Should Conform To Is 9824(Part 3):1996 , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powdered,,Without Tear, Properly Folded In A Paper • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards , Suction Catheter, Sterile. Size: Fg 5 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 6 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 8 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 10 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 12 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 14 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 16 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 18 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 20 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 22 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 8 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497.• Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size10 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size16 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size18 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497.• Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size20 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size22 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 24 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Infant Feeding Tube Size:10Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:8Fg, Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:5Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Sterile Disposable Perfusion Set With Airway And Needle (Adult Use) • For Gravity Feed Only • Sharp And Easy Piercing Spike With Air Vent • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Self Sealing Latex Bulb Which Will Also Act As An Port For Extra Medication • Efficient Roller Clamp To Control And Adjust The Fluid Rate • 21 G Needle • Should Conform To Is 12655 -4 Standard , Sterile Disposable Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use) • Burette Type Measured Volume Chamber Of 100 Ml • Drop Size Of Approx 60 Drops Per Ml • Injection Port,Latexfree, For Intermittent Medication. • Floating Auto Shut Off Valve (Latex Free) In Burette. • Soft And Kink Resistant Pvc Tubing. • Roller Controller For Flow Control • Tube Length 150 Cm • 23G Needle • Should Conform To Iso 8536-5 , Sterile Disposable Infusion Set With Microdrip (I.V.) • Microdrip Infusion Set With Drop Size Reduced To Approx 60 Drops Per Ml • Sharp And Easy Piercing Spike • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Fluid Rate • Should Conform To Is 12655 - 4 Standard , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conform To Is 12227 , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 16G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 20G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 22G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port. Size 24G • Suitable For Paediatric & Neonatal Use • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Mucus Extractor Sterile • Clear Transparent Container • Antibacterial Filter • Soft, Kink Resistant Pvc Tubing • Tube Size 10 Fg; Length 40 Cm (Min.) • Capacity 25 Ml , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Adult)• Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Pediatrics) • Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Adhesive Surgical Paper Tape (With Cutter) Size 1 X 9.0 Mts • Breathable, Hypo-Allergenic, Latex Free, Non-Woven And Micro- Porous Backing Material. • High Quality Water Soluble Adhesive For Gentle Bonding, Holds Well On Damp Skin And Clean Removal With Minimal Residue. • Should Conform To The Standard And Test Prescribed In Applicable Is (14944) And Bp Standard. , Adhesive Surgical Paper Tape (With Cutter) Size 2 X 9.0 Mts • Breathable, Hypo-Allergenic, Latex Free, Non-Woven And Micro- Porous Backing Material. • High Quality Water Soluble Adhesive For Gentle Bonding, Holds Well On Damp Skin And Clean Removal With Minimal Residue. • Should Conform To The Standard And Test Prescribed In Applicable Is (14944) And Bp Standard. , Adhesive Surgical Paper Tape (With Cutter) Size 3 X 9.0 Mts • Breathable, Hypo-Allergenic, Latex Free, Non-Woven And Micro- Porous Backing Material. • High Quality Water Soluble Adhesive For Gentle Bonding, Holds Well On Damp Skin And Clean Removal With Minimal Residue. • Should Conform To The Standard And Test Prescribed In Applicable Is (14944) And Bp Standard. , Plaster Of Paris Bandages 15Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Plaster Of Paris Bandages 10Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 10 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 12 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 14 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 16 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 18 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Scalp Vein Set (Disposable): Size 18G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 20G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 22G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 24G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 2 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 5 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 10 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 20 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Surgical Blade Sterile, Size 11 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 15 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 22 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Disposable Spinal Needle For Single Use 22G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Sterile Disposable Spinal Needle For Single Use 25G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Urine Collecting Bag, Disposable 2000 Ml • Transparent Sheet • Kink Resistant Flexible Tubing Not Less Than 90 Cm In Length • Should Have Non-Return Valve • Top Drainage Outlet • Graduated Bag • Moulded Handle For Easy Handling , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Endotracheal Tube, Plain - Size 2.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain With Radio-Opaque Line, Sterile, Single Use - Size 6Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 6.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Cuffed - Size 4Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 4.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Produc , Endotracheal Tube, Cuff - Size 7Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 9 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Tracheostomy Tube (Pvc), Plain, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line , Tracheostomy Tube (Pvc), Cuffed, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line • Balloon With Non Return Valve , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 24) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 28) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 32) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.5 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Sterilised Umbilical Cotton Tape Width 3 Mm, Length 75 Cm Should Conform To Schedule F(Iii) Of Drug And Cosmetic Act 1940 , Bone Wax Sterilised , Skin Graft Knife Blade (Sterile) (Disposable ) Skin Grafting Knife Blade (Sterile) Made Of Carbon Steel Or Stainless Steel Material 158 Mm Long Individually Wrapped In Wrapper Corrosion Inhibitor Paper In Single Packet,.In Packs Of 10. The Edge Must Be Sharp Enough To Cut The Skin In A Single Shave And Should Snugly Fit In The Handle Should Conform To Is 3759. 2. Skin Grafting Knife Handle (Watson Modification Of Humbys Knife ) Stainless Steel, Ce Certified, In Which The Blade Specified In (A) Above Should Fit Snugly. Should Conform To 7980-1976. , K Wire, Length 375 Mm; 1Mm Length Of Wire Should Be Mentioned With Specification. Should Conform To Is 8261 , K Wire, Length 375 Mm;1.6Mm • Length Of Wire Should Be Mentioned With Specification. • Should Conform To Is 8261 , K Wire, Length 375 Mm; Size 1.8Mm • Length Of Wire Should Be Mentioned With Specification. •Should Conform To Is 8261 , Face Mask, Disposable • Should Be Manufactured From Non Woven Poly Prop Fabric • Should Be 3 Ply Construction • Should Have High Bacterial Filtration Efficiency • Should Be Heat Sealed To Keep 3 Layers Together • Standard Size 17.5 X9 Cm • Color Green/Blue • There Should Be A String Each At All Four Corners,Length Of String Should Be 40Cm • Nose Clip Should Be There • No Elastic Band. , Surgical Cap, Disposable (For Surgeons) • Should Be Manufactured From Non Woven Fabric. • Strip For Tying The Cap Stitched On The Back For Proper Grip On The Forhead. • Green Colour • Ultrasonically Stitched • Air Permeable/Breathable • Should Retain Skin And Hair Particle. • Strip For Tying The Cap , Surgical Cap, Disposable ( For Nurses) • Should Be Manufactured From Non Woven Fabric • Blue / Green Colour • Round Upon Wearing, With Elastic • Air Permeable / Breathable • Should Retain Skin And Hair Particles , Foldable Intra Ocular Lense With Injector (Size + 11 D To +17.5 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics ( 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 11 D To +17.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 18 D To + 24 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 18 D To + 24 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 24.5 D To + 28.5 D ) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 11 D To +17.5 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 11 D To +17.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 18 D To + 24 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 18 D To + 24 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 24.5 D To + 28.5 D ) 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Bioconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powdered,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powder Free,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Extra Small. Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Small Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Medium Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Large Should Conform To Is 15354 , Pressure Monitoring Line / High Pressure Extension Line • Suitable For High Pressure Monitoring And For Connection Between Syringe Infusion Pump And Patient • Male Luer Lock At One End And Female Luer Lock At Other End ; Should Fit All Standard Equipment. Luer Lock Connectors Should Provide Secure Fitting. • Pressure Upto 800 Psi • Length 200 Cm • Sterile , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml • Should Have Suitability For Both Male And Female Patients • Should Be Provided With Adhesive For Fixation And Good Grip With Minimal Risk Of Allergy And Injury • Capacity 100 Ml • Sterile , Umbilical Catheter (For New Born) All Sizes • Radio Opaque Line • With Female Flexible Mount • Colour Coded Connector • Open Tip Should Be Soft, Rounded, Atraumatic • Length 40 Cm , Umbilical Cord Clamp • Suitable For Clamping Umbilical Cord Of New Born • Security Lock To Prevent Accidental Opening After Clamping • Grooved Clamping Area , Absorbable Oxidized Regenerated Cellulose Net Size 2X 3 With Surgical Sponge Topical Absorbable Haemostatic Bactericidal Property , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And Yconnector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 16 Fg , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And Yconnector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 18 Fg , Bone Cement With Antibiotics,Fast And Slow Setting , Sanitary Napkin, Beltless 1. Covering - Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler - The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc. 3. Back Strip - A Back Strip For Sticking The Sanitary Napkin Onto The Underwear Should Be There Using Good Quality Adhesive Material. 4. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Total Pad Length 210 +_ 10 230 +_ 10 Width 60 To 75 70 To 85 Thickness 8 +_ 2 5. Weight : Not More Than 10 Gm . . Instruction For Usage Should Be Mentioned On Every Packet , Sanitary Napkin, Belttype 1. Covering - Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler - The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc 3. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Pad Length 220 +_ 10 Width 70 +_ 5 Thickness 17 +_ 3 4. Weight : 12 +_ 3 Gm 5. Pack - Six Napkins In A Pack. 6. Elastic Belt With Loops Shall Be Provided In Each Pack. 7. Absorbency: The Napkin Should Be Able To Absorb Not Less Than 30 Ml Of Normal Saline Or Coloured Water Or Test Fluid When Poured On To The Centre Of The Napkin At The Rate Of 15 Ml Per Minute. .Instruction For Usage Should Be Mentioned On Every Packet. , Belt-Less Sanitary Napkin With Wings 1. Covering (Absorbing Top Sheet Corrector)-Good Quality Knitted Sleeve Or Non Woven Fabric Of Rash Free,Non Irritant And Soft To Touch Material Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet Absorbency Requirements.The Napkins Shall Have A Non Absorbent Barrier On One Side With Adhesive Covered By A Differently Identifiable Paper 2.Overall Length (Mm) 230 ± 5 3.Core Length 220 Mm± 10 4.Fluff Core/Pad Length 220 Mm± 10 5. Over All Width With Wings 160Mm+_5 6.Fluff Core/Pad Width 70 Mm± 5 7.Thickness Of A Single Pad 9-10Mm 8. Weight Of A Single Pad : 8-10 Gm 9. Pack Six Napkins In A Pack. 10Type.- Belt-Less Sanitary Napkin With Wings 11. Minimum Absorbency: 50Ml 12.Ph Value Of Absorbent Material 6-8.5 B. Disposable Individual Pouch Or Wrapper For Each Sanitary Napkin(As Per Ministry Of Environment,Forest And Climate Change Dated 08.04.2016) Pouch/Wrapper Specifications :- 1. Pouch/Wrapper Should Be Of The Size Of Sanitary Napkin Being Supplied. 2. It Should Have Adhesive To Seal The Sanitary Napkins Within. 3. Pouch/Wrapper Should Not Be Transparent. Note : Instructions For Use Of Disposable Pouch/Wrapper Mst Be Written In Hindi On Disposable Pouch/Wrapper. Blrseky Fd;S Gq;S Lsusvjh Usifdu Dks Eksm Dj Disposable Pouch/Wrapper Esa Mkys ,Oa Disposable Pouch/Wrapper Dks Xksan Yxh Iv~Vh Ls Cun Dj Lqjf{Kr Rjhds Ls Dwmsnku Esa Mkysaa , Oxygen Mask (Adult) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. , Oxygen Mask (Paediatric) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. • Mask Connector 4M , Sterile Catheter, Single Use, For Urinary Drainage(Foley Baloon Catheter), 2 Way, Size 14 • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For A Traumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30+- 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Ballon Capacity Should Be Mentioned As Per Is 11497 • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 , Nelaton - Catheter Size 14 Fg Distal End Is Close And Proximal End Has Female Colour Code Connector • Soft, Kink Resistant Medical Grade Pvc Tube • Length:40 Cm • Individually Packed In Poly And Sterile , Ecg Electrode •Reliable Trace, •High Conductivity,• Easy To Handle , Surgical Blade Sterile, Size 23 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Urethral Catheter 90 (Fg-14), Made Up Of Medical Grade Pvc , Urethral Catheter 91 (Fg-10), Made Up Of Medical Grade Pvc , Vaccum Suction Set, 2.5 Meter Length, •Suction Handle With Suction Tube •Sterile,• Pyrogenic Free, •Latex Free,• Single Use , Epidural Minipack 18G, 90 Mm, Metal Stylet For Single Use Only, •Sterile, •Epidural Catheter 20G, L 90 Cm, •6 Lateral Holes Closed End, •Borst Adapter •Epidural Catheter Flat Filter 0.2 Micro Meter •Thread Assist Guide•Lor (Loss Of Resistance) Plastic Syringe 6 Ml , Vascular Catheter 16G/5Fr, Double Lumen Length 40Cm.Usfda/ Four Digit Notified Ce Approved, Should Have Two Guide Wire 45Cm & 80Cm Or More (Logline Iv.) Peel-Away Sheath Glide Thru 5Fr*10 Cm, Guide Wire Nitinol 80 Cm, Guide Wire Nitinol 45 Cm Introducer Needle 21 G *7 Cm, Syringe - 10 Ml Tuer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape, 5 Fr Pressure Injectable Picc Line With Blue Flex Tip 40 Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter With Metal Guide Wire, 4Fr Single Lumen, Distalvalve, Saline Flush Only Size 45Cm Or More Usfda/ Four Digit Notified Ce Approved (Logline Iv.) Internal Stylet, Statlock Stabilization Device (Suture Less), Introducer Needle, Micro Introducer With Vessel Dilator, Guide Wire- 50 Cm Nitinol, Safety Scalpel,Suture Wing, End Cap , Vascular Catheter With Metal Guide Wire 3Fr Single Lumen,Micro Introducer,Contrast Media Compatible, Size 45Cm Or More (Logline Iv.) Usfda/ Four Digit Notified Ce Approved Syringe 12 Ml,Internal Stylet,Measuring Tape,Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G, Micro Introducer With Vessel Dilator,Guide Wire-50 Cm Nitinol,Needle Introducer 21 G, Safety Scalpel, End Cap , Vascular Catheter 7Fr-16 Cm With Chlorhexidine, Silver Sulfadiazine Coated Triple Lumen Usfda/Four Digit Notified Ce Approved. Introducer Needle 18 G., Spring Guide Wire 45 Cm J Tip, Dilator 8.5 Fr., Raulerson Spring Introduction Syringe 5 Ml , Vascular Catheter 5Fr/16G, Double Lumen Length 50Cm.Usfda/Four Digit Notified Ce Approved. Should Have Two Guide Wire 45 Cm & 80Cm Or More(Logline Iv.) Peel-Away Sheath Glide Thru 5Fr *10 Cm, Guide Wire Nitinol 80 Cm, Guide Wire Nitinol 45 Cm, Introducer Needle 21 G *7 Cm, Syringe-10 Ml Luer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape,5 Fr Pressure Injectable Picc Line With Blue Flex Tip 50 Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter 5Fr/16G, Double Lumen Length 55Cm.Usfda/ Four Digit Notified Ce Approved, Should Have Two Guide Wire 45Cm & 80Cm Or More (Logline Iv.) Peel-Away Sheath Glide Thru 5Fr *10 Cm,Guide Wire Nitinol 80 Cm,Guide Wire Nitinol 45 Cm,Introducer Needle 21 G*7 Cm, Syringe-10 Ml Luer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape,5 Fr Pressure Injectable Picc Line With Blue Flex Tip 55Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter With Metal Guide Wire 5Fr Double Lumen, Introducer Safety Piv Catheter20g, 45Cm Or More (Logline Iv.) Usfda/ Four Digit Notified Ce Approved Syringe 12 Ml, Internal Stylet, Measuring Tape, Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G,Micro Introducer With Vessel Dilator,Guide Wire-50 Cm Nitinol,Needle Introducer 21 G,Safety Scalpel, End Cap , Vascular Catheter With Metal Guide Wire,5Fr Triple Lumen, Size Range 55Cm Or More (Logline Iv:) Usfda/Four Digit Notified Ce Approved Syringe 12 Ml, Internal Stylet, Measuring Tape, Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G,Micro Introducer With Vessel Dilator, Guide Wire-50 Cm Nitinol, Needle Introducer 21 G, Safety Scalpel,End Cap , 3 Way Stop Cock , Non Pyrogenic & Single Use, Should Be Leak Proof, With Smooth Movements , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 10 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 50 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 100 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 150 Cm (Non Pyrogenic & Single Use) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) • Graduated Bag, • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube , Elastic Adhesive Bandage Bp 1M X 10Cm Adhesive Material Should Have Good Quality Sticking Property, Non-Allergic , Sterile Disposable (Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G · Should Be Packed In Transparent Single Blister Pack · Should Confirm To Is 10555 Standard · (Neonatal Iv Cannula Size 26) , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In La· Non Allergic, Leak Proof, Contour Should Be Maintainedrge Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent , Niv Mask (Noninvasive Ventilation Mask) Adult Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Paediatric · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads In Small Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear · Should Be Single Use With Bronchoscopy And Co2 &O2 Port With Chin Support Non Allergic, Leak Proof, Contour Should Be Maintained , Nebulization Mask Adult , Nebulization Mask Paediatric , Chemotherapy Port &Non-Coring Needles(Adult) Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Port With Small Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 8Fr With Silicon Material With Peel Apart Percutaneous Introducer System. · Chemo Port Huber Needle 20G And 22G. , Chemotherapy Port &Non-Coring Needles(Pediatric) Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Power Port With Large Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 6Fr With Silicon Material With Peel Apart Percutaneous Introducer System Chemo Port Huber Needle 20G And 22G. , Core Biopsy Instrument With Compatible Co-Axial Needle (Automatic Disposable) , Bone Marrow Biospy Needle , Eyelid Occlusion Dressings Use For Eyelid , Eye Pressure Shield , Sanitary Napkin Medium Size (Belt-Less Sanitary Napkin With Wings/6 Pieces Per Pkt) Overall Length (Mm)- 280±5 Core Length-265 Mm ± 10 Pad Length-265 Mm ± 10 (Thin Pads) Overall Width With Wings-160 Mm ± 5 Sap Sheet/Pad Width-70 Mm ± 5 Thickness Of Single Pad-2-3 Mm (Thin Pads) Weight Of Single Pad (Gm)- 7-8 Gm Minimum Absorbency (Ml)- 80Ml Ph Value Of Absorbent Material-6-8.5 Blrsrky Fd;S Gq;S Lsusvjh Usifdu Dks Eksm Dj Disposable Pouch/Wrapper Esa Mkys ,Oa Disposable Pouch/Wrapper Dks Xksan Yxh Iv~Vh Ls Cun Dj Lqjf{Kr Rjhds Ls Dwmsnku Esa Mkysaa , Essential Sutures List , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (3/8 Cir Rb Needle 40Mm Length 76 Cm) , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 20Mm Length 76 Cm) , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 40Mm Length 76 Cm) , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (3/8 Rb Needle 30Mm Length 76 Cm) , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (1/2 Cir Rb Needle 45 Mm Length 100 Cm) , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle 20Mm Length 70 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length75- 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Tapercut Needle (Heavy) 35- 40Mm Length 75-90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle40mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Conventional 25Mm Length 90 Cm)Undyed , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 20Mm Length 70 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide ) (1/2 Cir Rb Needle 40Mm Length 90 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 40Mm Length 90 Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting Needle 22Mm Length 45 Cm , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting 16Mm Needle, Suture Length 70Cm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (1/2 Cir Rb Needle 20Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 16 Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 40-45Mm Length 60-70 Cm.) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16Mm Needle,Length 90 Cm) , Non Absorbable Surgical Suture,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb Double 8Mm Needle, Length 60 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16 Mm Needle, Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy Needle 40-45Mm Length 75-90 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle Cutting Size 16-17Mm Length 70-90 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle 17Mm Length 70-90 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue Usp(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 16 Mm Length 70 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Cutting Needle 25Mm Length 45 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (L/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) , Non Absorbable Surgical Suture, ,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut 13Mm Double Needle 70Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Cement Concrete 13Mm Needle, Suture Length Of 70Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green/ Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided White (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green / Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) 1/2 Circle Taper Cut , 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) *With 1/2 Circle Taper Cut , 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With 1/2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglecaprone, Monofilament Sutures (1/2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm) , Absorbable Surgical Sutures Polyglecaprone, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 26Mm, Suture Length 70Cm) , Absorbable Surgical Sutures Monofilament Sutures Polyglecaprone /Polyglyconate (L/2 Circle Cutting 16Mm Needle,Suture Length 70Cm) , Absorbable Surgical Sutures Polyglecaprone / Polyglyconate, Monofilament Sutures (3/8 Circle Cutting24- 26Mm Needle, Suture Length Of 70-90Cm) , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Reverse Cutting 40-50 Mm Length 70- 90Cm) , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 31Mm Needle, Length 70Cm) , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 30Mm Needle, Length 70Cm) , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm/ , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm/ , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm/ , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet) 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 16Mm, Length 76 Cm) , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Cutting Needle 8Mm, Length 35 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 20Mm, Length 76 Cm) , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 16Mm, Length 76 Cm) , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 19Mm Length 76 Cm) , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglyconate, Monofilament Sutures (1/2 Circle Oval Rb Needle 26-30Mm Needle, Suture Length Of 70Cm) , Absorbable Surgical Suture Polyglyconate, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 20-26Mm, Suture Length 70Cm) , Nirogi Rajasthan Drug List , Anti-Infective Drugs , Cap. Minocycline 100 Mg , Inj. Artesunate Injection 120 Mg [Each Combo Pack Contains Artesunate Inj 120 Mg Vial, Sodium Bicarbonate Inj Ip 5% (2Ml Amp), Sodium Chloride Inj Ip 0.9% (10Ml Amp)] , Inj. Azithromycin 10 Ml Vial Equaivelent To 500 Mg , Inj. Caspofungin 50 Mg , Inj. Caspofungin 70 Mg , Inj. Cefipime 1000 Mg + Tazobactum 125 Mg , Inj. Cefoperazone 1Gm+Tazobactum 125 Mg , Inj. Cefoperazone 500 Mg Ip , Inj. Ceftazidime 1Gm+Sulbactam 500 Mg , Inj. Ceftazidime+ Avibactum 2 Gm+500 Mg , Inj. Ceftriaxone Ip 125 Mg Ip , Inj. Ceftriaxone 1000 Mg + Salbactum 500 Mg + Disodium Edetate 37 Mg , Inj. Ceftriaxone 1000 Mg + Sulbactam 500 Mg , Inj. Cefuroxime Sodium 750Mg , Inj. Clarithromycin 500 Mg Bp , Inj. Clindamycin 600 Mg/4Ml Inj. Ip In 4 Ml Vial , Inj. Doxycycline 100 Mg Usp , Inj. Ertapenem Sodium 1Gm = Ertapenem 1.046 Gm , Inj. Fluconazole 200 Mg , Inj. Levofloxacine 500 Mg/100 Ml Inj. Ip , Inj. Moxifloxin 400 Mg/100 Ml , Inj. Netilmycin 300 Mg/3 Ml Inj. Ip , Inj. Piperacillin 1 Gm + Tazobactum 125 Mg Ip , Inj. Streptomycin 500Mg / Vial , Inj. Teicoplanin 200 Mg Ip , Inj. Teicoplanin 400 Mg Ip , Inj. Tigecycline 50 Mg Usp , Inj. Tobaramycin 80 Mg Ip , Dolutegravir 50 Mg, Each Film Coated Tablet Contains Dolutegravir Sodium 50 Mg , Nevirapine 200 Each Tablet Contain Nevirapine 200 Mg , Sachet Fosfomycin 3Gm , Atazanavir300+Ritonavir100, Each Tablet Contain Atazanavir Sulphate Ip 300 Mg+Ritonavir Ip100 Mg , Syp. Cefaclor : Each 5 Ml Contain Cefaclor 125 Mg Ip , Cefixime 50 Mg Oral Suspension/Dry Syrup Each 5 Ml Contain Cefixime 50 Mg , Cefixime 100Mg Oral Suspension/Dry Syrup Each 5 Ml Contain Cefixime 100Mg , Cefpodoxime 50 Mg Oral Suspension/Syrup Each 5 Ml Contain Cefpodoxime Proxetil 50 Mg I.P. , Cefpodoxime 100Mg Oral Suspension/Syrup Each 5 Ml Contain Cefpodoxime Proxetil 100Mg I.P. , Syrup Cefuroxime Axetil Oral Suspension 125 Mg/5Ml Bp , Syrup Clarithromycin 125 Mg/5Ml In 30 Ml , Inj. Cefoperazone 1Gm , Syrup/Solution Levofloxacin 125Mg/5Ml , Syrup Linezolid 100 Mg/5Ml In 30Ml , Syrup Nitrofurantoin 25 Mg/5Ml In 100 Ml Bp , Syrup/Susp. Azithromycin 100 Mg/5Ml , Syrup/Susp. Azithromycin 200 Mg/5Ml , Tab. Cefixime + Potassium Clavulanate 200+125Mg , Tab. Cefpodoxime 100Mg , Tab. Cefpodoxime 200Mg I.P. , Tab. Cefpodoxime Cv 325 , Tab. Clarithromycin 250 Mg I.P. , Tab. Clarithromycin 500 Mg I.P. , Tab. Co-Trimoxazole Tablet Ip 480 Mg (Trimethoprim 80Mg+Sulphamethoxazole 400 Mg) , Tab. Cefuroxime 500 Mg. I.P. , Tab. Ivermectin 6 Mg + Albendazole 400 Mg , Tab. Ivermectin 6 Mg I.P. , Tab. Ivermectin 12 Mg I.P. , Tab. Ketaconazole 200 Mg Ip , Tab. Levofloxacin 750 Mg I.P. , Tab. Lopinavir 200 Mg+Ritonavir 50 Mg I.P. , Tab. Moxifloxacin 400 Mg B.P. , Tab. Nitazoxanide 500 Mg , Tab. Rifampicin 450 Mg , Tab. Rifampicin 600 Mg , Tab. Rifaximin 200 Mg B.P. , Tab. Rifaximin 550 Mg B.P. , Tab. Sofosbuvir 400 Mg+ Velpatasvir 100 Mg , Tab. Tenofovir 300 Mg , Tab. Voriconazole 200 Mg I.P. , Abacavir 300 Mg - Each Tablet Contain Abacavir 300 Mg Ip , Lamivudine 100Mg - Each Tablet Contain Lamivudine 100 Mg , Zideovudine 60 Mg+ Lamivudine 30Mg - Each Tablet Contain Zideovudine 60 Mg+ Lamivudine 30 Mg , Entecavir 1Mg Tab./Cap - Each Film Coated Tab./Cap. Contains Entecavir 1Mg , Dugs Acting On Respiratory Tract , Formetrol 12 Mcg + Budesonide 400 Mcg. Powder For Inhalation , Cap. Indacaterol And Glycopyronium Inhalation Powder 110/50 Mcg , Dpi Salmetrol 50 Mcg+Fluticasone 500 Mcg Ip , Dpi Budesonide 400 Mcg Ip , Dpi Levosalbutamol 100 Mcg+ Ipratropium Bromide 40 Mcg , Inj.Caffeine Cirate 20 Mg/Ml 1Ml Vial , Inj. Ephedrine 30 Mg/Ml Inj. Bp In 1Ml Ampoule , Inj. Omalizumab 150 Mg Vial , Mdi Formoterol 6 Mcg. + Budesonide 400 Mcg. , Mdi Leosalbutamol 50 Mcg.+ Ipratopium 40Mcg. , Mdi Levosalbutamol 50 Mcg , Nasal Spray Fluticasone Propionate Ip 50 Mcg , Resp. Formeterol 20 Mcg +Budesonide 0.5Mg , Resp. Levosalbutamol 1.25 Mg And Ipratropium 500 Mcg Respirator Solution 2.5Ml , Budesonide 0.5 Mg/Ml Respiratory Solution , Glycopyrronium Inhalation Solution 25 Mcg 2 Ml , Respules Tiotropium Bromide Dry Powder 30/Pack (Tiotropium Bromide Powder For Inhalation 18Mcg) , Syrup Dextromethorphan Hbr + Chlorpheniramine Each 5Ml Contains Dextromethorphan Hbr 10Mg + Chlorpheniramine 2Mg) , Syrup Montelucast +Levocetrizine (Each 5Ml Contains Montelucast 4Mg +Levocetrizine 2.5 Mg ) , Tab. Acebrophylline Special Repair 200 Mg , Tab. Bilastin 20 Mg , Tab. Fexofenadine 120 Mg I.P. , Tab. Fexofenadine 180 Mg I.P. , Tab. Loratidine 10 Mg I.P. , Tab. Montelukast 4 Mg I.P. , Tab. Montelukast 5 Mg I.P. , Tab. Montelukast 10 Mg I.P. , Tab. N-Acetylecystine Effervescent Form, Orange Flavour, 600 Mg , Tab. Pheniramine 25 Mg I.P. , Tab. Pirfenidone 200 Mg I.P. , Tab. Pirfenidone 400 Mg I.P. , Tab. Posacozazole 100Gm , Syp. Posacozazole 40 Mg/Ml , Inhalation Tiotropium 9Mcg (200Mdi) , Drugs Acting On Gi Tract , Cap. Racecadotril 100 Mg Ip , Drop Diastase, Pepsin With Simethicone 15Ml Drop Each Ml Contains Diastase (1:1200) 33.33Mg, Pepsin (1:3000) 5Mg & Simethicone Emulsion 40Mg , Enema Lactulose 20% , Hepato Protective Tablet: Each Film Coated Tablet Contains: Matadoxine 500 Mg,Silymarin 140 Mg L- Ornitine, L-Aspartate 150 Mg,Pyridoxime Hydrochloride 3 Mg, Folic Acid 1.5 Mg , Mefenamic Acid 250 Mg+ Dicyclomine Hydrochloride10 Mg Each Tablet Contain Mefenamic Acid 250 Mg+ Dicyclomine Hydrochloride10mg , Inj. Ornidazole 500 Mg Ip , Inj. Palonosetron 0.25 Mg , L-Ornithine L-Aspartate (150 Mg) + Pancreatin (100 Mg) Capsule / Tablet , Bacillus Clausii Spores Suspension 2 Billion/5Ml , Sachet Racecadotril 10 Mg , Syrup Cyproheptadine Hcl 2Mg/5Ml Ip 200 Ml , Syrup Drotavarine Hcl 20Mg/5Ml , Syrup Liquid Paraffin & Milk Of Magnesia Each 15 Ml Contains: Milk Of Magnesia 11.25 Ml + Liquid Paraffin 3.75 Ml 170 Ml , Syrup Enzyme (Each 5 Ml Contains Diatase 50 Mg & Pepsin 10 Mg) 100 Ml , Syrup Ondansetron 2Mg/5Ml , Syrup Potassium Magnesium Citrate (Ach 5Ml Contians Potassium Citrate 1100Mg + Magnesium Citrate 375 Mg) , Syrup Ranitidine 5 Mg /5Ml Oral Suspension/Solution /Syrup I.P. , Syrup Sodium Picosulphate 5Mg/5Ml , Syrup Sorbitol + Tricholine Citrate (Each 10Ml Contains Sorbitol (70%) 7.15Gm & Tricholine Citrate (66%) 0.55Gm) , Syrup Sucralphate (Each 5Ml Contains Sucralphate 500Mg) , Tab. Cyproheptadine 4 Mg I.P. , Tab. Esomperazole 40 Mg I.P. , Tab. Pantaprazole 20 Mg I.P. , Cardiovascular Drugs , Cap. Ramipril Ip 5 Mg , Inj. Metroprolol 1Mg/Ml 5Ml Vial , Inj. Enalaprilat Injection 1.25Mg/Ml In 1Ml Ampoule , Inj. Fondaparinux 2.5 Mg Usp , Telmisartan 40 Mg + Hydroclorothiazide12.5 Mg, I.P. Each Tablet Contain Telmisartan 40 Mg + Hydroclorithiazide12.5 Mg , Inj. Hydralazine 20 Mg/Ml Inj. Ip , Inj. Enoxaparin Sodium Injection (Low Molecular Wt. Heparin) 40 Mg/0.4Ml In 0.4Ml Injection In Prefilled Syringe , Inj. Mephentermine 30Mg/Ml Injection 10Ml Vial , Inj. Nimodipine Infusion 10Mg/50 Ml Inj. Bp In 50Ml , Inj. Reteplase 18 Mg , Inj. Tenecteplase 20 Mg , Inj. Tenecteplase 40 Mg , Inj. T-Pa 20 Mg Alteplase For Injection , Inj. T-Pa 50 Mg Alteplase For Injection , Syrup Amlodipine Bp 1 Mg/Ml , Tab. Midodrine 5 Mg , Tab. Apixaban 2.5 Mg , Tab. Apixaban 5 Mg , Tab. Bosentan 62.5 Mg I.P. , Tab. Chlordiazsepoxide 5 Mg + Clidinium 2.5 Mg , Tab. Chlorthalidone 6.25 Mg I.P. , Tab. Cilostazol 50 Mg I.P. , Tab. Cilostazol 100 Mg I.P. , Tab. Clinidipine 5 Mg I.P. , Tab. Clinidipine10 Mg I.P. , Tab. Clinidipine 20 Mg I.P. , Tab. Dabigatran 150 Mg , Tab. Dabigatran 110 Mg , Tab./Cap Diltiazem Cr/Prolonged Released Tablet 90 Mg , Tab. Ivabradine 5 Mg , Tab. Moxonidine 0.2 Mg B.P. , Tab. Moxonidine 0.3 Mg B.P. , Tab. Nebivolol 5 Mg I.P. , Tab. Nebivolol 10 Mg I.P. , Tab. Nicorandil 5Mg I.P. , Tab. Nicumalone 1 Mg I.P. , Tab. Nicumalone 3 Mg I.P. , Tab. Nicumalone 4 Mg I.P. , Tab. Nifedipine Capsule 10 Mg , Tab. Nifedipine 20 Mg Special Repair I.P. , Tab. Olmesartan 20 Mg I.P. , Tab. Prasugrel 10 Mg , Tab. Prazosin 5 Mg Er/Pr/Cr , Tab. Propranolol 10 Mg , Tab. Propranolol 40 Mg Special Repair , Tab. Ranolazine 500 Mg Er/Cr/Pr , Tab. Rivaroxaban 10 Mg B.P. , Tab. Rivaroxaban 15 Mg B.P. , Tab. Rivaroxaban 20 Mg B.P. , Tab. Rosuvastatin 10 Mg + Finofibrate160 Mg I.P. , Tab. Ticagrelor 90 Mg , Tab. Tolvapatan 15Mg , Tab. Trimetazidine Hcl Modified Release Tablet 35 Mg , Tab. Trimetazidine Hydrochloride Modified Release (Cr/Sr/Pr) 60 Mg , Tab. Verapamil Hydrochloride Suntained Release 120Mg (Each Tablet Contains 120Mg Special Repair Of Verapamil Hydrochloside) , Tab. Warfarin 1Mg I.P. , Tab. Warfarin 2 Mg I.P. , Tab. Warfarin 3 Mg I.P. , Tab. Chlorthalidone 12.5 Mg , Tab. Chlorthalidone 25 Mg , Antineoplastic & Immunosuppressant Drugs , Cap.Alectinib 150 Mg , Capsule Kit Aprepitant 125 / 80 Mg (Each Kit Contains 1 Tab Of 125 Mg & 2 Tab Of 80Mg) , Cap. Ceritinib Capsule 150 Mg , Cap. Cyclosporine 100 Mg , Cap. Dacarbazine 200 Mg , Cap. Mycophenolate Mofetil 500 Mg , Cap. Rucaparib 200 Mg , Cap. Rucaparib 300 Mg , Cap. Temozolamide 250 Mg Ip , Inj. Docetaxel 80 Mg/4Ml , Inj. Adalimumab 40 Mg , Inj. Avelumab 200 Mg , Inj. Azacitidine 100Mg , Inj. Bortezomib 2.5 Mg , Inj. Cabazitaxel Injection 60 Mg , Inj. Carfilzomib 60 Mg , Inj. Carmustine 100 Mg Ip , Inj. Cetuximab 100 Mg , Inj. Cetuximab 500 Mg , Inj. Cladrabine 10 Mg , Inj. Cytarabine 1000 Mg Ip , Inj. Daratumumab 100 Mg. , Inj. Daratumumab 400 Mg. , Inj. Darbepoietin Alfa 100 Mcg , Inj. Darbepoietin Alfa 200 Mcg , Inj. Darbepoietin Alfa 500 Mcg , Inj. Decitabine 50 Mg , Inj. Degarelix 80 Mg , Inj. Degarelix 120 Mg , Inj. Denosumab 120 Mg , Inj. Docetaxel 120 Mg Ip , Inj. Durvalumab 120 Mg . , Inj. Durvalumab 500 Mg . , Inj. Eribulin 0.5 Mg , Inj. Eribulin 1 Mg , Inj. Fludarabine Phosphate 100 Mg Ip , Inj. Fludarabine Phosphate 50 Mg Ip , Inj. Fulvestrant 250 Mg , Inj. Goserelin Acetate 3.6 Mg Bp , Inj. Horse -Atg(Anti Thymocyte Globulin) 250 Mg , Inj. Interferon Beta 1-A Injection 30 Mcg , Inj. Irinotecan Injection 40 Mg/2Ml , Inj. Irinotecan 100 Mg/5Ml Inj. Ip In , Inj. Liposomal Doxorubicin Hydrochloride 20 Mg /10Ml Injection In 10Ml Vial/Ampoule , Inj. Liposomal Doxorubicin Hydrochloride 50 Mg /25Ml Injection In 25Ml Vial/Ampoule , Inj. Mesna 200 Mg/2Ml (Sod. Mercaptoethane Sulphate) In 2 Ml Ampoule , Inj. Methotrexate 250 Mg , Inj. Methotrexate 1000 Mg , Inj. Methotrexate 15Mg/Ml , Inj. Mitomycin 2 Mg Ip , Inj. Mitomycin 40 Mg Ip , Inj. Nabpaclitaxel / Paclitaxel Nano Particle Injection 100 Mg , Inj. Natalizumab 300 Mg , Inj. Nimotuzumab 50 Mg , Inj. Octreotide-Lar (Long Acting Release) 30 Mg , Inj. Peg Asparaginase 3750 Iu 5 Ml , Inj. Peg Filgrastim 6 Mg , Inj. Pemetrexed 100Mg Ip , Inj. Pemetrexed 500 Mg Ip , Inj. Plerixafor 24 Mg , Inj. Ranibizumab Injection (10 Mg/Ml) 2.3Mg/0.23Ml Per Vial , Inj. Rasburicase 1.5 Mg , Inj. Rituximab 100 Mg , Inj. Rituximab 500 Mg , Inj. Topotecan 2.5 Mg Ip , Inj. Topotecan 4 Mg Ip , Inj. Trabectedin 1 Mg , Inj. Trastuzumab 440 Mg , Inj. Trastuzumab150 Mg , Inj. Vinorelbine 10Mg Ip , Inj. Vinorelbine 50Mg , Syrup Cyclosporine 100Mg/Ml In 50 Ml Ip , Inj. Rabbit-Atg (Anti Thymocyte Globulin) 25 Mg , Tab. /Cap. Hydroxyurea 500Mg I.P. , Tab. /Cap. Everolimus 5Mg , Tab. /Cap. Everolimus 10Mg , Tab. /Cap. Tacrolimus 0.25 I.P. , Tab. /Cap.Nintedanib 150Mg , Tab. 6-Mercaptopurine 20 Mg , Tab. Afatinib 20 Mg , Tab. Afatinib 30 Mg , Tab. Afatinib 40 Mg , Tab. Alpelisib 150 Mg , Tab. Alpelisib 250 Mg , Tab. Axitinib 5 Mg , Tab. Capmatinib 200 Mg , Tab/Cap Dabrafenib 50 Mg , Tab. Dacomitinib 15 Mg , Tab. Eltrombopag 25Mg , Tab. Eltrombopag 50Mg , Tab. Erlotinib 150 Mg I.P. , Tab. Erlotinib 100Mg I.P. , Tab. Enzalutamide 40Mg , Tab. Ibrutinib 140Mg , Tab. Lapatinib 250Mg , Tab. Lenalidomide 25Mg , Tab. Lenalidomide 10 Mg , Tab. Lenvatinib 4 Mg , Tab. Lenvatinib 10 Mg , Tab. Melphalan 2Mg I.P. , Tab. Nilotinib 150 Mg . , Tab. Nilotinib 200 Mg . , Tab. Olaparib Tablet 100 Mg , Tab. Olaparib 150 Mg . , Tab. Osimertinib 80 Mg . , Tab. Pazopanib 200Mg , Tab. Pazopanib 400Mg , Tab. Pomalidomide 2 Mg , Tab. Pomalidomide 4 Mg , Tab. Regorafinib 40 Mg , Tab. Ribociclib 200 Mg . , Tab. Ruxolitinib 5 Mg , Tab. Ruxolitinib 15 Mg , Tab. Ruxolitinib 20 Mg , Tab. Sorafinib 200 Mg I.P. , Cap. Sunitinib 12.5 Mg , Cap. Sunitinib 25 Mg , Cap. Sunitinib 50 Mg , Tab. Tacrolimus 1Mg , Cap. Tegafur 100 Mg And Uracil 224 Mg , Tab. Tofacitinib 5 Mg , Dermatological Drugs , Cap.Acitretin 10 Mg , Cap.Acitretin 25 Mg , Cap. Isotretinoin 10 Mg Ip , Cap. Isotretinoin 20 Mg Ip , Cream Amorolfine 0.25% , Cream Azelaic Acid 20% , Gel Benzoyl Peroxide 2.5 % Ip , Cream Desonide 0.05% , Cream Glycolic Acid 6% , Cream Hydrocortisone 1% Ip , Cream Hydroquinone 2% Usp , Cream Luliconazole W/W 1% Ip , Cream Mometasone 0.1 % Ip , Cream Neomycin Sulphate 0.5% , Gel Adaplene (0.1% W/W) , Inj. Secukinumab 150 Mg , Lotion Clotriamazole 1%+Beclomethasone 0.025% , Lotion Ketaconazole 2% , Minoxidil Topical Solution 5% , Lotion Sunscreen Lotion Spf 30 (Octinoxate 7.5%, Avobenzone 2%, Oxybenzone 3%, Octocrylene 3% And Zinc Oxide 2%) 50Ml , Lozenses (Clotrimazole) 10 Mg , Neomycin Sulphate And Bacitracin Ointment Usp 5 Mg + 500 Iu/Gm , Ointment Neomycin, Polymyxin B And Bacitracin Zinc Ophthalmic 5 Gm (Each Gram Contains Polymyxin B Sulfate Usp 5000 Units, Bacitracin 400 Units ,Neomycin Sulphate And Zinc Oxide In Ointment Base ) , Ointment Tacrolimus 0 .03% , Ointment Tacrolimus 0 .1% , Diuretics , Tab. Furosemide 20 Mg + Spironolactone 50Mg , Tab. Torsemide 20 Mg I.P. , Hormones ,Other Endocrine Drugs , Inj. Prostaglandin 500 Mcg /Ml In 1 Ml Vial , Inj. Progesterone Injection 50 Mg Inj. Bp , Inj. Degludec Insulin 100 Iu/Ml Injection 3Ml , Inj. Detemir Insuline 100 Iu/Ml Injection 3Ml , Inj. Fsh 75 Iu , Inj. Hp-Hmg (Highly Human Menopausal Parodied Gonadotropin)150 Iu Ip , Inj. Insulin Aspart 100 Iu/Ml Injection , Inj. Insulin Glulisine (Monocomponent Insulin Glulisine) 100 Iu/Ml Injection , Inj. Insulin Lispro Inj. 3 Ml In 100Iu/Ml , Inj. Invert Sugar Injection Ip 10% W/V , Inj. Triptorelin 3.75 Mg , Inj. Triptorelin 11.25 Mg , Inj. Insulin Glargine 300 Iu Per Ml Inj. Ip In 1 Prefilled Pen Of 1.5Ml , Tab. Carbimazole 10 Mg I.P. , Tab. Cyproterone Acetate 2 Mg +Ethynil Estradiol. 0.035 Mg Tab Bp , Tab. Dapagliflozin 5Mg , Tab. Dapagliflozin 10Mg I.P. , Tab. Levothyroxine Sodium 25 Mcg I.P. , Tab. Levothyroxine Sodium 75 Mcg I.P. , Tab. Linaglipitin 5 Mg , Tab. Magestral Acetate 160 Mg I.P. , Tab. Melatonin 3 Mg , Tab. Methimazole 5 Mg Usp , Tab. Methimazole 10 Mg Usp , Tab. Repaglinamide 1 Mg , Tab. Sitagliptin + Metformin (50/500) , Tab. Vildagliptin 50 Mg I.P. , Tab. Voglibose 0.2 Mg I.P. , Tab. Voglibose 0.3 Mg I.P. , Immunologicals , Inj. Tetanus Vaccine (Adsorbed) Ip In 0.5 Ml Per Vial Inj. , Ophthalmological Preprations , Eye Drop Natamycin 5% , Eye Drop Olapatadine 0.1% And Ketorolac 0.4% Ophthalmic Solution , Brinozolamide 1% W/V And Brimonidine Tartrate 0.2% W/V Ophthalmic Suspension , Eye Drop Cyclopentolate 1% Ip , Eye Drop Dorzolamide 2% Ip , Eye Drop Fluromethalone 0.1% , Gatifloxacin 0.30% And Prednisolone Acetate 1% Ophthalmic Suspension , Eye Drop Hpmc 0.3% , Eye Drop Itraconazole 1% , Eye Drop Moxifloxacin 0.5%+Ketorolac Tromethamine 0.5% , Eye Drops Moxifloxacin 0.5% And Dexamethasone 0.1% , Eye Drops Moxifloxacin 0.5% And Prednisolone 1% Ophthalmic Solution , Eye Drop Nepafenac 0.1% , Eye Drop Proparacaine 0.5% W/V Usp , Eye Drop Sodium Chloride 5 % Bp , Eye Drops Travapost 0.004% And Timolol 0.5% Eye Drops Ip , Eye Drop Tropicamide 0.8% W/V+Phenylepherine Hcl 5% W/V , Eye Drop Voriconazole 1% W/V (Lyophilized 30Mg) , Eye Ointment Azithromycin 1% , Eye Ointment Chloramphenicol 1%, Polymyxin-B Sulphate (10000 Units) And Dexamethasone 0.1% Sodium Phosphate , Eye Ointment Itraconazole 1% , Eye Ointment Moxifloxacin 0.5% , Eye Ointment Sodium Chloride 6% Usp , Gatifloxacin Eye Drops 0.3% , Gnaecolocical & Obstetric Drugs , Cap. Danazol 100 Mg Ip , Inj. Cetrorelix Acetate 0.25 Mg , Combikit Of (Tab Fluconazole150 Mg + Azithromycin 1Gm & Secnidazole1gm) Each Kit Contain 1Tab Fluconazole150 Mg + 1 Tab.Azithromycin 1Gm & 2 Tab.Secnidazole1gm . , Inj. Recombinant Fsh 150 Iu , Inj. Recombinant Fsh 300 Iu , Inj. Recombinant Lh 75Iu , Tab. Dyhdrogesterone 10 Mg I.P. , Tab. Estradiol Valerate 2 Mg , Tab. Ethynil Estradiol 0.02 Mg And Desogestral 0.15Mg , Tab. Desogestrel 0.075 Mg , Tab. Ulipristal 5 Mg , Psychotropic Drugs , Cap. Clomipramine Ip 25 Mg , Inj. Haloperidol (Long Acting) 50Mg/Ml Ampoule Inj. Ip , Inj. Levosulpride 12.5 Mg/Ml Injection 2Ml , Inj. Risperidone Prolonged Released Depot/Suspension 25 Mg Injection , Inj. Risperidone Prolonged Released Depot/Suspension 50 Mg Injection , Syrup Triclophos 500 Mg/ 5Ml In 30Ml I.P. , Tab. Amisulpride 50 Mg I.P. , Tab. Aripiprazole 10 Mg I.P. , Tab. Aripiprazole 5 Mg I.P. , Tab. Chlordiazepoxide 25 Mg I.P. , Tab. Clonazepam 0.25 Mg I.P. , Tab. Clonazepam 1Mg I.P. , Tab. Clozapine 25 Mg I.P. , Tab. Clozapine 50 Mg I.P. , Tab. Clozapine 100 Mg I.P. , Tab. Desvenlafaxine 50 Mg Cr/Pr/Sr/Er/ , Tab. Duloxitine 20 Mg I.P. , Tab. Duloxitine 30 Mg I.P. , Tab. Etizolam 0.5 Mg I.P. , Tab. Fluovoxamine 100 Mg I.P. , Tab. Fluovoxamine 50 Mg I.P. , Tab. Mirtazapine 7.5 Mg I.P. , Tab. Mirtazapine 15 Mg I.P. , Tab. Nitrazepam 5 Mg I.P. , Tab. Nitrazepam 10 Mg I.P. , Tab. Oxazepam 15 Mg I.P. , Tab. Paroxetine 12.5Mg , Tab. Paroxetine 25 Mg , Tab. Zolpidem 10 Mg I.P. , Solutions Correcting Water, Electrolyte &Acid- , Inj. Sodium Chloride 3% 100 Ml Ip , Inj. Sodium Chloride 0.9% 500 Ml Glass Bottle Inj. Ip , Inj. Sodium Chloride 0.9% 1000 Ml Glass Bottle Inj. Ip , Vitamins & Minerals , Cap. Calcium Dobesilate 500 Mg , Cap. Anti-Oxidants (Beta Carotene-10 Mg, Vit-E 25 Mg, Vit-C 100 Mg,Copper 1.5 Mg, Managanese 1.5 Mg, Zinc 7.5 Mg,Selenium 150 Microgram) , Cap. Vitamin A 25000 Iu Ip , Drop Ferrous Ascorbate & Folic Acid Drops 15Ml (Each Ml Contains Ferrous Ascorbate 10Mg And Folic Acid 100 Mcg) , Drop Vitamin - E 50 Mg/Ml Drops 15Ml , Drop Vitamin D3 400 Iu/Ml , Drop Vitamin D3 800 Iu/Ml , Folic Acid Cynocobalamine And Nicotinamide Inj.(Each Ml Contains Folic Acid 15Mg/Ml Cynocobalmine 500Mcg/Ml And Nicotinamide 200Mg/Ml) In 10 Ml Inj. Pack , Inj. Vitamin D3 (600000 Iu) Ip , L-Arginine 3Gm And Proanthocynadine 75 Mg Granules , Syrup Calcium Phosphate 200 Ml (Each 10Ml Contain Elemental Calcium 300Mg Elemental Phosphorus 150Mg Elemental Magnesium 75Mg Elemental Zinc 4Mg Vitamin D3 200-300Iu.) , Syrup L-Carnitine 500 Mg/5Ml In 30 Ml Usp , Syrup Zinc 20 Mg/5Ml 100 Ml , Tab. Zinc 50 Mg , Analgesics, Antipyretics & Anti-Inflammatory , Fentanyl Transdermal Patch 25 Mcg/Hour (Each Patch Deliver Fentanyl 25Mcg/Hour) , Fentanyl Transdermal Patch 50 Mcg/Hour (Each Patch Deliver Fentanyl 50Mcg/Hour) , Inj. Paracetamol Infusion 500 Mg With Both Temper Evident Caps , Syrup Codiene Phosphate And Tripolidine (Each 5Ml Contains Codiene Phosphate 10Mg And Tripolidine 1.25Mg) 60Ml , Syrup Paracetamol And Ibuprofen (Each 5Ml Contains Paracetamol 162.5Mg + Ibuprofen 100 Mg) 60Ml , Syrup Mefenamic Acid 100 Mg/5Ml , Tab. Aceclofenac 100Mg + Thiocolchicoside 4Mg , Tab. Aceclofenac Special Repair 200 Mg , Tab. Aceclofenac+Paracetamol+ Serratiopeptidase (100+325+15 Mg) , Tab. Buprinorphine Tablet 2 Mg , Tab. Diclofenac & Paracetamol & Serratiopeptidase (Diclofenac Sodium 50Mg+Paracetamol 325Mg+Serratiopeptidase 10Mg Table) , Tab. Etoricoxib+Thiocolchicoside(60+8 Mg) , Tab. Indomethacin 75 Mg Special Repair , Tab. Morphine 10 Mg I.P. , Tab. Paracetamol 650 Mg I.P. , Tab. Piroxicam Dt 20 Mg I.P. , Tab. Serratiopeptidase 10 Mg I.P. , Tab. Serratiopeptidase 20 Mg I.P. , Tab. Tapentadol 50 Mg , Tab. Tramadol 37.5 Mg + Paracetamol 325 Mg , Tab. Trypsin 48Mg + Rutoside 100Mg+Bromelain 90Mg , Tab. Trypsin Chymotripsin Each Enteric Coated Tablet Contains 1 Lacks Unit Of Enzymetic Activity) , Antiallergics & Drugs Used In Anaphylaxis , Drop Hydroxyzine Hydrochloride Oral Solution/Drop 60Mg/Ml , Drop Ambroxol 7.5 Mg/Ml 15 Ml , Drop Anticold (Each Ml Contains Paracetamol 125 Mg, Chlorpheniramine Maleate 1Mg & Phenylepherine Hydrochloride 2.5 Mg) 15 Ml , Inj. Methylprednisolone Acetate 40 Mg Ip , Inj. Methylprednisolone Succinate 125 Mg Ip (Each Vial Contains Methylprednisolone Succinate 125 Mg) , Inj. Phenylephrine Hydrochloride 10 Mg/Ml Inj. Bp/Ip In 1Ml Vial , Tab. Deflazacort 6 Mg , Tab. Deflazacort 12 Mg , Tab. Methylprednisolone 4 Mg I.P. , Tab. Methylprednisolone 16 Mg I.P. , Tab. Methylprednisolone 8 Mg I.P. , Tab. Prednisolone Ip 40 Mg , Antiepileptics , Lacosamide Infusion 200 Mg , Inj. Piracetam 200 Mg , Syrup Phenobarbitone 20 Mg/5Ml In 100Ml , Syrup Piracetam 500 Mg/5Ml In 100Ml , Tab. Lacosamide 50 Mg B.P. , Tab. Lamotrigine 100 Mg I.P. , Tab. Levetiracetam I.P. 250 Mg , Tab. Levodopa+Carbidopa+Entacapone 100 Mg /25 Mg / 200 Mg , Tab. Oxacarbazepine 300 Mg I.P. , Tab. Oxacarbazepine 450 Mg I.P. , Tab. Topiramate 50 Mg I.P. , Tab. Zonisamide 50 Mg , Tab. Zonisamide 100 Mg , Antiparkinsonism & Alzheimers Drugs , Tab. Amantidine 100 Mg , Tab. Rasagiline1 Mg , Tab. Ropinirole 0.25 Mg I.P. , Tab. Selegiline 5 Mg I.P. , Drugs For Gout &Rheumatoid Arthritis , Inj. Nandrolone Decanoate 100 Mg Ip , Inj. Nandrolone Decanoate 50 Mg Ip , Tab. Alendronate Sodium 70 Mg I.P. , Tab. Cholchicine 0.5 Mg I.P. , Tab. Febuxostat 40 Mg , Tab. Febuxostat 80 Mg , Drugs For Urology , Cap. Silodosin 4 Mg , Cap. Silodosin 8 Mg , Tab. Alfuzosin 10Mg Ip , Tab. Calcium Acetate 667 Usp , Tab. Sevelamer Carbonate 800 Mg , Tab. Sildosin 8Mg + Dutasteride 0.5Mg , Tab. Solifenacin Succinate 10 Mg I.P. , Miscellaneous , Inj. Botulinum Toxin Type A For Injection 100 Iu , Inj. Botulinum Toxin Type A For Injection 50 Iu , Inj. Sildenafil Injection 0.8 Mg , Tab. Atomoxetine 10 Mg , Tab. Atomoxetine 18 Mg , Tab. Atomoxetine 25 Mg , Tab. Dapoxetine 30 Mg I.P. , Tab. Donepezil 5 Mg I.P. , Tab. Flunarizine 10 Mg , Tab. Rizatriptan 10Mg I.P. , Tab. Slidenafil 20 Mg I.P. , Tab. Tetrabenazine 25 Mg , Triamcinolone Oromucosal Paste Bp 0.1% W/W , Tab. Nicotine 2 Mg , Tab. Nicotine 4 Mg , Anesthetics , Desflurane,240 Ml Usp, 100% Desflurane. Liquid For Inhalation , Inj. Lignocaine (Preservative Free) (Each Ml Contains Lignocaine Ip 21.3 Mg Sodium Chloride Ip 6.0 Mg 50 Ml Vial) , Inj. Lignocaine Hydrochloride 2% Ip 50Ml Vial , Inj. Midazolam 5Mg/Ml Injection 10 Ml Vial , Inj. Rocuronium 100Mg/10Ml Inj. In 10 Ml Vial , Inj. Ropivacaine 0.75% Ip , Inj. Ropivacaine 0.75% 20 Ml Ampule/Vial , Antiseptic & Disinfectants , Gargle Povidone Iodine 0.5% W/V , Drugs Affecting Blood , Inj. Romiplostim 250 Mcg , Inj. Romiplostim 500 Mcg , Inj. Human Albumin 20% In , Glycopegylated Extended Half Life Nonacog Beta Pegol F Ix 500 Iu , Glycopegylated Extended Half Life Nonacog Beta Pegol F Ix 1000 Iu , Glycopegylated Extended Half Life Factor Viii 500 Iu , Glycopegylated Extended Half Life Factor Viii 1000 Iu , Reagents & Diagnostic Agents , Inj. Trypan Blue 0.6% W/V , Antidotes , Tab. Disulfiram Tablet 500 Mg , Tab. Disulfiram 250 Mg I.P. , Tab. Naltroxone 50 Mg I.P. , Nonabsorbable Polypropylene Light Weight Macroporous Mesh , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial Medial , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial Medial , Absorbable 5 Mm Hernia Mesh Fixation Device 30 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4.1 Mm Length Along With Flexible Shaft Up To 3 Cm. , Absorbable 5 Mm Hernia Mesh Fixation Device 15 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4.1 Mm Length Along With Flexible Shaft Up To 3 Cm. , Non Absorbable 5 Mm Hernia Mesh Fixation Device With 30 Helical Shaped Titanium Tacks 3.96Mm Width And 0.61 Mm Diameter , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Linear Cutter 55Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Linear Cutter 75Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Universal Linear Cutter Cartridge 75Mm Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 75Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology. , Universal Linear Cutter Cartridge 55Mm For Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 55Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology. , Curved Cutter Stapler 40 Mm Linear Cutter Or Curved Shaped Radial Stapler Cartridge For Simultaneous Cutting And Stapling , Curved Green Cartridge Having Close Staple Height Of 2.0 Mm, Tactile Feedback On Completion Of Firing Sequence, New Anvil, Knife With Every Catridge , Circular Stapler 33Mm With Controlled Tissue Compression Or Dst Technology With, Longer Staple Leg 4.5 Mm To 5.5Mm , Fixed Or Tilt Top Anvil ,Available In Various Shaft Sizes Std. Or Xl For Deeper Access , Usfada Approved , Laparoscopic Cartridge For Stapler 60 Mm Blue, 1.5 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Laparoscopic Cartridge For Stapler 60 Mm Green, 2.0 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Pph Stapler 33Mm - Hemorrhoidal Stapler Kit Consists Of 33Mm Hemorrhoidal Circular Stapler (With Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm - 1.5 Mm, Staple Open Leg Length Of 5.5 Mm), Suture Threader, Circular Anal Dilator, Purse-String Suture Anoscope, Suture For Purse String. , Optically Guided Bladeless Trocar 12Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Optically Guided Bladeless Trocar 12 Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer Length 100Mm. , Facial Closure Device Contain - Optical Bladeless Trocar With Facial Closure Device Comaptible With Clear Cannula Have Two Side Opening Meant For Uniform Port Closure , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Varied Staple Height Reloads/Cartridges For 80 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 60 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 60 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Eea Circular Stapler Purple Colour Medium Thick , Triple Row With Tristaple Technology (Three Row Of Staple Inner To Outer Row 3.0,3.5 And 4.0 Mm With Sloped Cartridges Face In One Stapler) Diameter 31Mm , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 80 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 80 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Wound Protector With Double Ring In Medium 5-9 Cm , Endo Catch Specimen Removal Kit:With Continuous Ring ,Polyurethane Pouch With 34.5 Cm Shaft Length , 10Mm With Leakproof And Impervious Material To Cancer Cells Of 0.5 Microns/ Pretied Purse String On Pouch Usfda Approved , Disposable Laparoscopic Clip Applier Preloaded With 15/16 Clips, 5Mm Diameter With Clip Logic Technology And Digital Display Titanium Clips- U Shaped , Laparoscopic Liner Cutter Without Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 45Mm Capable Of Loading All Length Cartridges On Same Gun Only , Laparoscopic Liner Cutter Without Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 60Mm, Capable Of Loading All Length Cartridges On Same Gun Only , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,9Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Up To And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip- Focus 9 , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,17Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Upto And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip - Focus 17 , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 35 Cm Shaft Length With 5 Mm Wide Straight Jaw Design With Seal Length Of 20Mm And Cut Length Of 16Mm,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy And Having A Temperature Controlled Mechanism Within The Jaw And Having Articulation Of 110 Degree(55 Degrees On Both Sides) And Capable Of 360 Degrees Rotation , Advanced Bipolar Tissue Sealer 37 Cms, With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm Jaw Aperture Designed For Use In Laproscopic Surgical Procedures With Curved And Tapered Tip And Uses An Advanced Algorithm For Intelligent And Efficient Energy Delivery. Device To Have Intuitive Design With Separate Seal And Cut Button And 360 Degree Continuous Shaft Rotation , Laparoscopic Shears 5Mm Diameter,36Cm Long, 18Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting,Sealing,Grasping And Coagulating Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, Advance Hemostasis Hand Activation Mode For Sealing Vessels Upto 7Mm In Diameter ,Ergonomic Handle Compatible With Ultrasonic Energy Source, Capable Of Hand And Foot Activation With An Integrated Hand Piece And Transducer. , Connecting Cable For Ultrasonic Harmonic Scalpel For Open Energy Probes Compatible With Focus Plus Shear- Hp Blue , Connecting Cable For Ultrasonic Harmonic Scalpel For Lap Energy Probes Compatible With Ace Plus Shear Hp054 , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (2*2 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*2) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*1 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (1.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (3 Mm) Diameter Drill Bit Machine With Insertion Tools , Speech Prosthesis For Laryngectomy 22.5Fr (6 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (8 Mm) , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 2.0,2.5 And 3.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Tan Colour Code For Vascular Applications , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 3.0,3.5 And 4.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Purpule Colour Code For Medium To Thick Tissue , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Black Varied Staple Height Of 4, 4.5 And 5Mm Leg Length , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 2*4Cm Or Size 2-3*5-6Cm , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 5*10Cm Or Size 5-7*7- 11Cm Or 4*8Cm , Disposable 10 Mm Endoscopic Clip Applier With Facility Of Loading Clips Independent Of The Firing Mechanism: Medium/Large Size , Disposable Clip Applier Preloaded With 20 Clips, Superinterlock Security With Clip Design Technology Medium , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Urine Collecting Bag, Disposable 2000 Ml With Uroflow Meter , Central Neck Line - Double Lumen (Antimicrobial Coated/ Chlorhexidine , Silver Sulfadiazine Coated) Central Lumen Catheter, Double Lumen) 7 Fr Usfda/Ce Certificate With Notified Body , Microcatheter Selective Infusion Microcatheters For Intra Cranial Aneurysm Treatment With 2 Tip Markers , Straight Tip Microcatheter With Four Transtion Zone Proximal Stainless Steel Triple Braid, Distal Segment Stainless Steel With Soft Distal Segment Of 6 Or 10 Cm, Outer Layer Pebax,Inner Layer Of Stainess Steel Braid Coil, Ptfe & Polyolefin Elastomer With Proximal &Distal For Deploying Intracranial Device: Stent Deployment0.027.Id , Straight Tip Microcatheter With Four Transtion Zone Proximal Stainless Steel Triple Braid, Distal Segment Stainless Steel With Soft Distal Segment Of 6 Or 10 Cm, Outer Layer Pebax,Inner Layer Of Stainess Steel Braid Coil, Ptfe & Polyolefin Elastomer With Proximal &Distal For Deploying Flow Divertor Delivery With Single Tip Markar 0.027 Id , Microcatheter Flow Dependent Super-Selective High Flow Infusion Microcatheters For Cerebral/Spinal Avms (Compatible With Dmso) , Stinless Steel Hydrophilic Coated 0.14 Neuro Guide Wire With Twister Technology, Microridge Design, Optimized Core Wire Profile 205Cm In Length & Coil Length 5Cm , Aortic Punch 4 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 4.5 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 3.6 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Laproscopic Port With Trocar 5Mm Optically Guided Bladeless Trocar 5Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. 14G X 11Cm To 20Cm , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode- Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. (Size 18Gx11cm Or Above) , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode- Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. (Size 18Gx15cm Or Above) , • Incise Drape Made Up Of Polyester Film With An Acryllc Adhesive That Contains A Complex Of Lodoform (N- Vinyl 2 Pyrrolldine) With A Lodine Concentration Of 0.092 Mg Lodine/Cm2. • Film Should Be Breathable And Conformable To Skin, Compatible With Povidone And Chg Skin Preps. • Lodine From The Drape Should Be Present In The Deepest Skin Layers (1000 Microns Depth) Where Hair Follces Exist Apart From Killing Microbes On Skin Layer. • Produst Should Be Registered As A Class ‘D Medical Devise With Cdsco India Since Its A Antimicroblal Product. • It Should Be Gamma Sterile And Us-Fda Approved. Size Should Be 56Cm 45Cm (Adhoslve Area) , Rem (Return Electrode Monitoring) Single Use, Corded Patient Return Electrodes Conductive Adhesive Hydrogel With Usfda , Surgical Gloves 6.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Ionic Silver Highly Absorbent Multilayer Foam Dressing With Broad Spectrum Antimicrobial , Bactericidal Efficacies And Having A Soft Siliconadhesive Wound Contact Layer , Providing Sustain Release Of Silver Upto 7 Days. Size: 10 Cms X 10 Cms And More , Self-Adherent Moist Wound Foam Dressing Made Up Of Multilayer Matrix With Soft Silicon Adhesive Layer For Pressure Ulcers/Bed Sores At Sacrum 16 Cms X 20 Cms And More , Double/Single Wall Resuscitator With Peep Valve In Adult (Double Wall Resuscitator With Peep Valve In Adult It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable/Eto Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult Bag Volume: Mark Iv (1300 Ml Or More) Weight: Adult (415 G) And More It Should Be Us-Fda, Ce & Iso Certified Adult , Double Wall Resuscitator With Peep Valve In Paediatrics It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult & Peadiatric It Should Have Provision To Attach Manometer For Paediatrics Ambu Bag Bag Volume: Mark Iv Baby (300 Ml) Weight: Baby (190 G) It Should Be Us-Fda, Ce & Iso Certified , Single Patient Use Sebs Resuscitator (Spur Ii With Peep Valve In Neonatal) • It Should Be Single Use Resuscitator Made To Sebs Material Not Pvc. • It Should Have Unique Single-Shutter Valve System For Reliable Functionality & Swivel Between Valve A Nd Mask Permits 360° Positioning In Relation To The Patient • It Should Have Thin-Walled Compression Bag With Hand Strip. • Resuscitator Volume: Neonate(220Ml) • (Including Reservoir And Mask) • It Should Be Ce/Iso, Us Fda Certified. , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Offset Connector Cardio Sensor Electrodes • It Should Have High Conductive Wet Gel To Ensure Reliable Traces. • It Should Be Design With Offset Connector To Prevent Artefacts From Disrupting The Readouts • It Should Have High Quality Ag/Agcl Sensor To Ensure Excellent Trace Quality • It Should Have Size Not More Than 72 X 68 Mm • • Sizes -Adult , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Ultrasorbs Ap Disposable Drypads, Dry Pad For Moisture Management, 58.4X90cm, With Breathable Layer, Super Absorbent Core, Aqua Shield Film And Air Permeable Back Sheet, Absorbency Of 1800-2300Gm, Usfda/Ce/Bis Compliant, Iso13485 Compliant , Over-The-Ear Nasal Cannula Over-The-Ear Nasal Cannula With Star Lumen, 50 Tubing, Must Be Flexible Contoured Lip Tab Provides A High Level Of Stability And Patient Comfort. Over-The-Ear Design For A Comfortable And Secure Fit, Crush- And Kink-Resistant Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Pediatric Nasal Cannula Pediatric Nasal Cannula Softech With Universal Oxygen Connector, 7 Star-Lumen Tubing Lightweight, Flexible Nasal Cannula With Standard Over-The-Ear Designed That Optimizes Fit And Stability, Soft Nasal Prongs Help Maximize Patient Comfort. Individually Packaged For Convenience And Sterility. Manufacturer Must Be Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K & Ce Certification. , Volumetric Incentive Spirometer (Adult) Volumetric Incentive Spirometer (Adult) 4000 Ml And Above With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification , Volumetric Incentive Spirometer (Pediatric) Volumetric Incentive Spirometer (Pediatric) 2500 Ml With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Mask For Tracheostomy Adult Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Pardiatric Mask For Tracheostomy Pediatric Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Elongated Aerosol Mask Adult Elongated Aerosol Mask Adult With Under-The-Chin Design For Excellent Fit On Wide Range Of Face Sizes Must Be Clear, Soft Vinyl For Patient Comfort; Adjustable Nose Clip Assures Comfortable Fit; Specifically Designed For Aerosol Therapy; Must Be With Supplied With 6Ft -7Ft. Corr A Flex Corrugated Tubing, Featuring Cuttable Sections Every 6 In. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Limb Portable Adult Ventilator Circuit With Universal Single Limb. Must Be Complete Kit With Main Circuit Hose, Exhalation Valve Manifold, Aerosol Hose, Patient Elbow Connector, Proximal Airway Pressure Line, Exhalation Valve Line, And Humidifier Limb. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilayor Circuit Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 70-72 Inch. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Infant Prong Cpap Cannula Infant Prong Cpap Cannula Nasal Size 0 With Designed To Reduce Trauma Associated With Delivery Of Infant Nasal Cpap. Must Be Soft Siliconised, Anatomically Curved Prongs To Enhance Fit. Luer Fitting On Expiratory Connector To Allow Proximal Airway Pressure Monitoring. Each Set To Include, Soft Siliconised Cannula; Inspiratory & Expiratory Elbow Connector; Knit Cap; Two 6 In. Hook And Loop Fastener Sections; Two 10 To 7.5 Mm Adaptors. Manufacturer Must Be Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K & Ce Certification. , Fhme Heat And Moisture Exchangers With Bacteria Viral Filters Bacterial Filtration Efficiency≫ 99.99 % And Viral Filtration Efficiency ≫ 99.9999% . Filter Membrane Should Be Of A Hydrophobic Non-Woven Polypropylene Material. Should Be Tailored To Meet The Specific Needs Of Both Anaesthesia And Intensive Care. , Tracheostomy Hme: 1 Heat And Moisture Exchangers For Spontaneously Breathing Tracheotomy Patients. 2 Should Have In Built Oxygen Port. 3 Should Be Compact & Light Wt. 4 Should Be Suitable For Ambulatory Patients, Sampling And Suctioning Can Be Done Without Removing It. 5 The System Should Have Kink Resisting Oxygen Tubing , Double Lumen Endobronchial Tube Left: Size-37Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left: Size-39Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Manifold Manifolds In 2, 3, 5 Port With Configuration Of Left-Right Orientation, On-Off Handle, Full-Half Body, 200 Psi-500 Psi Rating And Wide Port Spacing. Should Have Clear Polycarbonate Body To Provide Durability And Visibility, Airless Rotator And Large Bore Inner Lumen Throughout Including Rotator.Usfda Approved , High Pressure Tube High Pressure Tubing In 25Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 51Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 76,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 122,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 183Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , Torque Device Torque Device For .014 To .038 Standard And Hydrophilic Guide Wires With Squeeze-Load- Release Mechanism.Usfda Approved , Radial Band Radial Hemostatis Band In 24 Cm . Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Radial Band Radial Hemostatis Band In 29 Cm. Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Angiography Needle Angiography Needle In 18G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Needle Angiography Needle In 20G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Wire Ptfe Guidewire In .035, .038, In Regular Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coating For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , Angiography Wire Long Length Ptfe Guidewire In .035, .038, With Exchange Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coatting For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , H10ydrophilic Wire Long Length Hrophilic Guidewire Of .018, .025, .035, .038 In 150-180Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Ce Approved. , Hydrophilic Wire Long Length Hydrophilic Guidewire Of .018, .025, .035, .038 In 220-260Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Ce Approved. , Hydrophillic Braided Sheath Hydrophilic Braided Sheath Introducer In 4F To 7F, Length: 7Cm, 10-11Cm, 15-16Cm, 23-25Cm Or 7-25 Cm With The Option Of .018, .021, .025 Plastic Jacketed And Spring Coil Guidewire. Should Have Ultra-Thin Wall And Flat Wire Braiding Technology To Provide Support And Low Profile.Usfda Approved , Femoral Sheath With Needle Femoral Sheath In 5F To 8F, Length: 11-25Cm With Puncher Needle Of 18G And Guidewire Of .035, .038. Should Have Rotating Suture Ring, Snap-Fit Dilator To Prevent Slipping During Insertion And Holster Pack. Should Be Available In Polypropylene. Usfda Approved , Angiography Radial Catheters Diagnostic Radial Catheter With Radial Ultimate Curve In 4-6F. Lenght Of 100Cm, 110Cm, 125Cm. Should Have Four Type Of Radial Ultimate Curves. Should Have Flat Wire Braiding, Nylon Material, Thin Wall Design For Higher Flow Rates, Radio-Opaque Tip, Strain Relief And Winged Polycarbonate Hub. Us Fda Approved , One Loop & Triple Loop Snare Snare Kit(2-35Mm Diameter, 90-Degree Nitinol & Gold-Plated Tungsten Loop) And Multiloop Snare Kit(2- 45Mm Diameter, Three Interlaced Nitinol Loops) For Foreign Body Retrieval, Should Come With Flexible, Reinforced, Strain Relief Hub To Reduce Buckling And Unique Peel Away Insertion Tool. Usfda Approved , Ptca Kit (1) Three Port Manifold With Knobs To Turnright When Open (2) One Pressure Line, (3) Fluid Connecting Line, (4) Contrast Connecting Line, (5) One Three Way Stop Cock, (6) One Y-Connector Hemoststic Valve With Spring Type Push And Release Mechanism, (7) One Inflation Device With Manometer Upto 30 Atm (Easy To Operate With Luminescent Dial), (8) One Luer Lock Controlled Syringe Of 10 Ml With Finger Grip, (9) Insertion Needle, (10) Torque Device.Usfda Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes Are 5Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 6Fr , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 7Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 8Fr. Usfda/ Notified Ce Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.S Eparate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes Are 10Fr. Usfda/ Notified Ce Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 12Fr. Usfda/ Notified Ce Approved , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3.5Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 5.5Mm , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. T Size 13Fr . , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. Sizes 16Fr. , Catheter Mount Double Swivel Connector, It Should Have Bronchoscopy Port . It Sholud Be Approved By Us Fda , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism, Radiopaque Stripe, Gamma Sterilized Size - 20Fr Length (0.8 - 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism, Radiopaque Stripe, Gamma Sterilized Size - 24Fr Length (0.8 - 5.0) , Percutaneous Endoscopic Gastrostomy (Peg) 24Fr Percutaneous Endoscopic Gastrostomy (Peg) Medical Grade Silicone Construction.External Retention Ring .Universal And Bolus Feeding Port Connectors,Medication Port.Collapsible Internal Retention Bumper.Radiopaque Stripe And Bumper.Tubing Clamp.Eto Sterilized.Sizes - 24Fr , Anti Microbial Gloves , Anti Microbial Gloves , Anti Microbial Gloves , Anti Microbial Gloves , Anti Microbial Gloves , Anterior Chamber Iol Pmma Material, Single Piece Kelman Multiflex Design5-6 Mm Optic Size With 12-13 Mm Overall Size Biconvex Power Range +12 To +24Should Be Iso Or Ce Certified. , Capsular Tension Ring Standard Capsular Tension Ringpmma Material With One Eyelet Each At Each End 10 Mm To 12 Mm Overall Diameter Sterile Should Be Iso/Ce Certified Mfg. , Neonatal High Flow Nasal Cannula Having 8 Litre Flow. Should Have Soft Tip . , Pur-Xro Catheter 20 Cm, 28G/1Fr Picc Line With Stylet, Splitting Needle With Securing Wings With 8 Cm Extension Tubing (Flow Rate 0.7Ml/Min) , Pur-Xro Catheter 30 Cm, 24G/2Fr Picc Line With Split Cannula And 10Cm Extension Tubing Over Catheter (Flow Rate 4.5Ml/Min) , Long Introducer Sheath (20-30 Cm Long) (Size 5Fr..) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 6Fr.) Us Fda + Ce/ Dgci Approved·· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 7Fr.) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 4F Us Fda + Ce/ Dgci Approved·Sizes 4 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 5F Us Fda + Ce/ Dgci Approved·Sizes 5 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 6F Us Fda + Ce/ Dgci Approved· Sizes 6 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Ptfe Coated Diagnostic Guide Wire - (Exchange Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In , 0.035 Inches Size· Should Be 240-300 Cm Long· Should Be Available As Straight Or J-Shaped Tip· Should Be Available Fixed As Well As Movable Core. , Hydrophilic Diagnostic Guide Wire - Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved·Should Be Available In 0.032 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Hydrophilic Diagnostic Guide Wire - Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Radiofocus Miniplastic Guidewire (, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Sould Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 150-180 Cm Long , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Multipurpose Catheter Us Fda + Ce/ Dgci Approved Multipurpose Catheters In Various Standard Curves And Lengths. , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , Nternal Mammary Catheter 7Fr Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , By-Pass Graft Catheter 5Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths , By-Pass Graft Catheter 6Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths , By-Pass Graft Catheter 7Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved · , Introducer Sheaths For Pediatric Use (Size 5 Fr.) With J Tip/Straight Introducer Wire Us Fda + Ce/ Dgci Approved· Between 5.5-7.5 Cm Long· 0.021 Inch Straight Introducer Guide Wire· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant· With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· Should Have Smooth And Resistance Free Insertion , Arterial Pressure Monitor Lines (100 Cm Long) Us Fda + Ce/ Dgci Approved·Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (150 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (200 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements·Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Angio.Kit/Ptca Kit (3 Port Many Fold With Attached Tubing One Pressure Line + Two Iv Set Connecting Tube And Two Leurlock Syringe ) Us Fda / Ce/ Approved , Venaseal Closure System For Varicose Veins Usa/Fda Approved N Butyl Based Adhesive Formation 50/90/105/120 Cm 145 Cm(3/4/6/8 F ,014/0.35 Compatible , Bone Marrow Biopsy Needle Size 8G 4 & 6 With Diamond Bevel Tip & Tapered Distal Canula. Disposable Bone Marrow Biopsy Needle Should Have Ergonomic T- Handle Design With Seprate Handle Cap. Should Have Trocar/Diamond Tip For Easy Coring Of Bone. Should Have Triple Crown Cannula Tip With 6 Facets.Should Be Available With Narrow Acquition Cardle With Sample Size Verfication Marking Should Be Available In 8,11,13 Gauze Usfda/Four Digit Ce Approved , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Having Maryland Jaw Sealer And Divider With Wide Jaw Aperture 13Mm And Cut Length 18.5Mm With Shaft Rotation Of 350 Degrees And With One Step Sealing Mechanism. Should Have The Manual Cutting Mechanism. And It Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting & Coagulations Device With Tissue Fusion Ligature Technology Have Small Jaw Tissue Sealing System For Open Procedures Vessel Sealing Instrument With Cut Length Of 14.7 Mm, Seal Length Of 16.5Mm, Jaw Angle 28 Degrees. Should Have The Manual Cutting Mechanism.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligature Technology Laparoscopic Blunt Tipped Vessel Sealer And Divider 37 Cm Long 5Mm Instrument. Wide Jaw Aperture 14.5 Mm With Shaft Rotation Of 180 Degrees ; Multifunctional Laparoscopic Device For Tissue Fusion.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligasure Technology Instrument For Open Surgeries With Instrument Length Between 21-23 Cm And Electrode Length Between 17-21 Cm Having 22 Degree Curved Zow With Contoure Tip Activation Both Though Hand Activation And Foot Activation With A Manually Controlled Cutting Mechanisn , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Have 36Mm Jaw Length, 180 Degree Rotatable Instrument With Curved Blade For Large Volume Tissue. Should Have The Manual Cutting Mechanism. , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Have Vessel Sealing Instrument For Open Surgeries With Reusable Clamp Length Between 16-23Cm With 12-40 Degree With Straight/Curved Jaw And Its Should Have Including 7Mm Cutting And Coag With Usfda. , Double Lumen Catheter Size- 12 Frx16 Cm Double Lumen Catheter Size- 12 Frx16 Cm (Double Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot)Size- 12 Frx16 Cm With Us Fda / Iso Ce Certified , Double Lumen Catheter Size- 12 Frx13 Cmdouble Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot Size- 12 Frx13 Cm Usfda Along With Iso Ce Certified , Long Term Double Lumen Dialysis Catheter Size- 15 Fr X 27 Cm Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided Catheter, Pull Apart Sheath, Dialator, Tunnelling Stylet, Guide Wire J/S, With Disppenser And Injection Caps, Symmetrical Tip Retrograde And Antigrade Size- 15 Fr X 27 Cm Usfda Certification Along With Iso, Ce. , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Transperant Surgical Wound Dressing Size- 5X 5.72 Cm Tranparent Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidal Protection And Anti Microbial Property. Provide A Waterproof Sterile Barrier To External Contaminating Including Liquids, Bacteria Anf Viruses , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Proteciton And Anti Microbial Property , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property , Multi-Vent Mask Pediatric, Multi-Vent Mask Pediatric, Air Entrainment Masks, Must Be Safe, Simple Delivery Of Variable Oxygen Concentrations. Each Mask To Includes Color-Coded Diluters: Green For Low Concentration, White For Medium Concentration. Locking Ring To Secure Flow Setting. Must Include Adaptor For High Humidity Entrainment. Complete Kit With 7-Ft Oxygen Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane Material, Catheter Has Zigzag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. Size 12-Fr Product Should Be Usfda Approved , Closed Suction Catheter Mdi Port Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Material Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane,Catheter Has Zig-Zag Ports For Better Suctioning. Turbo/ Twin Peep Seals. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. Usfda/Eu Ce Notified , Closed Suction Catheter Has Isolated Cleaning Chamber 12 Fr. Closed Suction Catheter Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip.Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material,Catheter Has Zig-Zag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version.Can Be Used For 72Hr. Size 12 Fr. , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane Material, Catheter Has Zigzag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. Size 14-Fr Product Should Be Usfda Approved. , Multifocal Iol Multifocal Iol (Multifocal Iol Biconvex, Single Piece Optic Size 6 Mm, Overall 12-13 Mm Haptics Hydrophobic Single Loop Or Hydrophilic Double Loop Uv Blocking 360 Degrees Square Edge, Sterile Packing Disposable Sterile Injector For Sub 2.8 Mm Incision Power +16 To + 25 D Diffractive Multifocal Design With Near Add +3 To +4 D Iso Or Ce Approved Samples Required For Approval , Glaucoma Drainage Implant (Valved) With Silicon Tube Adult , Glaucoma Drainage Implant (Valved) With Silicon Tube Paediatric , Scleral Fixiated Intraoccular Lense Single Piece Pmma: Optic6-6.5Mm, Overall13.5Mm Haptic With Hole For Suture Fixation , Central Line With Triple Lumen With Y Needle With Syringe And Guide Wire 7Fr To 8.5Fr With 15 Cm To 20 Cm Catheter With Tecoflex/ Polyurathane Material With Usfda Approved. , Post Operative Surgical Cover Dressings Hydrofiber/Foam Dressings With 1.2% W/W Impregnated Ionic Silver & Tripple Hydrocolloid Matrix Dressings With Broad Spectrum Bactricidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , Post Operative Surgical Cover Dressings Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver & Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactericidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , 2 Pcs Flat Base Ostomy Body Fit 60 Mm Kit 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm, Elastic Tape In Semi- Circular Shape With Hydrocolloid Adhesive For Extra Security Of Base Plate. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm), Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks , 2 Pcs Convex Base Ostomy Body Fit 60 Mm Kit Two- Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm)Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks , 1 Pcs Trasnparent Colostomy Body Fit 60Mm Kit One- Piece Colostomy Bag- Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.34 N/Mm), Bag Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. One Side Transparent For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm) , 2 Pcs Flat Base Ostomy Body Fit Bag 60 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. Window On Bag For Inspection 60Mm . With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic. , 2 Pcs Flat Base Ostomy Body Fit Bag 70 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. One Side Transparent For Inspection. 70Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic , 2 Pcs Convex Base Ostomy Body Fit Bag 60 Mm Two-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material. Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. . Window On Bag For Inspection 60Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic , Antimicrobial Transperant Provides Immediate And Continuous Antimicrobial Protection With Integrated Chlorhexidine Gluconate (Chg) Gel Pad, Proven To Reduce Crbsi And Vascular Catheter Colonization, Size 11.5Cm To 8.5Cm, Breathable Film Coating Provides A Barrier To Microbes* And External Contaminants Size 11.5Cm To 8.5Cm, , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad, A Superabsorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. Size 13X13 Cm And More , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad, A Superabsorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. Size 10X25 Cm , Polysiloxane Or Silicone Gel Sheet For Scar Management. Size 10 * 10 Cm Or 10X18cm , Polysiloxane And Silicone Gel Sheet For Scar Management Size 5 X5 Cm , Triple Layer Antimicrobal Form Dressing For Burn Wound With Silver Sulphate, Silver Content 1.2 Mg/Cm 2 With Active Release Of Silver Upto 7 Days With Soft Silicon Atraumatic Wound Contact Layer For Painless Dressing Change. Product Should Be Ce/Usfda Certified Size 20X20 Cm (45Mm) + 15% Deviation Insize Will Be Acceptable. , Triple Hydrocolloid Skin Barrier Where No Cutting Is Required Comprised Of Pectin, Gelatin And Sodium Carboxy Methyl Cellulose,Elastomeric Polymers Extending Turtlenecking Effect And Rebounding Memory Technology With Audible Click And Flexible Tape Collar. , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved 10Mm , Nasal Haemostatic Sponge Pack With Out Airway 8Cm , Nasal Haemostatic Sponge Pack With Out Airway 10Cm , Nasal Haemostatic Sponge Pack (With Airway) 8Cm , Flexomatlic Tube 3-8.5 With Stylet Reinforce Et Tube With Wiring From Tip To End. It Should Be Usfda/Ce/Bis/Is. , Disposable Transducers For Invasive Pressure Monitoring Compatible With Available System In Cath Lab In Smsh Us Fda + Ce/ Dgci Approved· Disposable Transducers For Invasive Pressure Monitoring· Should Be Compatible With Available System In Cath Lab (Iabp - Data Scope & Cath Lab Transducer) And Iccu At Smsh· Should Meet Highest Medical Industrial Standards· Quality Certification Should Be Provided Form Authorized Agencies , Dialyzer Size 1.3 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.4 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.6 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tu Bing Set Must Be Same Company. , Dialyzer Size 1.8 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Padiatric Dialyzer Size 0 .6 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Padiatric Dialyzer Size 0.8 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Nirogi Rajasthan Sutures List , Braided E Caprolactone Coated Lactomer 1, 90Cm Gs-25,37-40Mm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 2-0 90Cm Gs-25,3Omm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 1 90Cm Gs-25,37-40Mm1/2 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest , Braided E-Caprolactone Coated Lactomer 3-0 75Cm C-14 , Undyed 24Mm 3/8 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest , Braided E-Caprolactone Coated Lactomer 0 90Cm Gs-24 , Violet 40Mm 1/2 Circle Taper Point , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest , Braided E-Caprolactone Coated Lactomer 1-0 90Cm Gs-25 , Dyed/Undyed 37- 40Mm 1/2 Circle Reverse Cutting , Polyglactin 910 Violet Braided, 1, 35 Cm 1/2 Circle Reverse Cutting (Heavy) 23 Mm - 25 Mm Needle , Polyglactin 5-0 Rb Oval ½ Circle 16 Mm 45 Cm , Polyglactin 5-0 Cement Concrete 3/8 Circle 16 Mm 45 Cm , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure Mp, Purest Form Of Triclosan, , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% & Above, Violet 1/2 Circle , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% & Above, Violet 1/2 Circle , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 1/2 Circle Taper Point Rb-2, Double Needle, 13 Mm Needle, , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 3/8 Circle Taper Point, Bb Single Armed Needle 17 Mm Needle, , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Single Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm , Monofilament Polyglyconate 1 150Cm Gs-25 Loop, Green 48Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 2-0, 75Cm Green 26-30Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 3-0, 75Cm Green 20-26Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 4-0, 75Cm Green 17-20Mm 1/2 Circle Taper Point , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 3-0,70 Cm,1/2 Circle R.B.,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 4-0,70 Cm,1/2 Circle R.B.,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 5-0,70 Cm,1/2 Circle R.B.,13 Mm , Monofilament Glycomer 1 90Cm Gs-21 , Volet 37Mm 1/2 Crcle Taper Pont , Monofilament Glycomer 2-0 90Cm Gs-21 , Volet 37Mm 1/2 Crcle Taper Pont , Non Absorbable Surgical Suture, Sterilized Surical Needled Black Braided Silk With Needle 1/2 Circle Round Bodied 30 Mm Needle , Length 70 Cm Size 2-0 , Braided Coated Non Absorbable Suture Usp 1-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 2-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 3-0 75 Cm X 2 , Silk Reel 4-0 , Braided Polyester Caoted With Silicon 2, 26Mm 1/2 Circle Rc 75Cm , Braided Polyester Caoted With Silicon 5, 55Mm 1/2 Circle Rc 75Cm , Polypropylene Blue Monofilament, 2-0, 90 Cm 1/2 Circle Round Body Double Needle 26 Mm , Polypropylene Blue Monofilament Usp 3/0,2,90 Cm,1/2 Circle Taper Point (Double Armed),26 Mm , Polypropylene Blue Monofilament, 4-0, 75 Cm 1/2 Circle Round Body Double Needle 17 Mm , Polypropylene Blue Monofilament Usp 5/0,1,90 Cm,1/2 Circle Taper Point (Double Armed),18 Mm , Polypropylene Blue Monofilament, 6-0, 75 Cm 3/8 Circle Round Body (380 Microns) Double Needle (Cutting) 13 Mm , Non Absorbable Polypropylene Surgical Sutures Size:7-0,3/8 Circle C1 Taper Point Cv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon , Monofilament Polybuetester Coated With Polytribiolate 6-0 75Cm 2Xcv-1X36 , Blue 9Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 4-0 90Cm 2Xcv-23X36 , Blue 17Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 7-0 60Cm 2Xmv-175-8 , Blue 8Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 2-0 90Cm 2Xv-20X36 , Blue 26Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 3-0 90Cm 2Xv-20X36 , Blue 26Mm 1/2 Circle Taper Point , Non-Absorbable Synthetic Unidrectional Dual Cut Angle Barb With Welded Loop Or Tab End Made Up With Polybeutester Size 1, 37Mm, 30Cm, 1/2 Circle, Taper Point , Synthetic Nonabsorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polybeutester Blue Size 2-0, 1/2 Circle, 37Mm, , Absorbable Synthetic Unidirectional Dual Cut Angle Barbed With Welded Loop Or Tab End Made Up With Polyglyconate 2-0 26-30 Mm 30 Cm 1/2 Circle Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 1-0, 1/2 Circle, 37Mm, 30Cm , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 2-0, 1/2 Circle, 26Mm, 30Cm , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 3-0, 1/2 Circle, 26Mm, 30Cm , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Glycomer Blue Size 2-0, 1/2 Circle, 24Mm, 30-45Cm Rc , Polyester Ethylene Terephthalate Nonabsorbable Surgical Braided, Sterile, Surgical Suture Composed Of Poly (Ethylene Terephthalate.) Long-Chain, Linear Polyesters 1 /2 , Laproscopic Knotless Pga -Pcl Bidirectional Taper Point Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Bidirectional Taper , Absorbable Antibacterial Polydiaxonone Monofilament Taper Point Surgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Voilet , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 1-0,90 Cm,1/2 Circle R.B.,30 Mm , Non-Absorbable Surgical Suture Black Braided Silk 1-0 Rc 3/8 Circle 45 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 5-0 Rc 3/8 Circle 12 Mm 76 Cm , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 5-0,76 Cm,3/8 Circle R.B,12 Mm , Non-Absorbable Surgical Suture Black Braided Silk 6-0 Rc Mp 3/8 Circle 8 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 2-0, 1/2 Circle Taperpoint, 36 Mm,100 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 6-0 Rb Micro Point ¼ Circle 8 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 4-0 Cement Concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 3-0 Cement Concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 5-0 Cement Concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 5-0 Rb Oval 1/2 Circle 16 Mm 45 Cm , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 26Mm Length 70Cm3-0 , Non Absorbable Surgical Suture Sterilized Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm4-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm 5-0 , Non Absorbable Polypropylene Surgical Sutures Size:6-0,3/8 Circle 175-6 Taper Point /Rc Bv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer , Non Absorbable Polypropylene Surgical Sutures Size:7-0, Compound Curve ( 1/2 & 3/8 Circle) Circle 175-6 Taper Point Blackmatte Needle Made Of Tungsten - Rhenium , Monofilament Synthetic Absorbable Suture Poliglecaprone 25 - Undyed Ep 3-0,70 Cm,1/2 Circle Oval R.B. J.B. Needle,26 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 3-0, 3/8 Circle Reverse Cutting,Ps Prime 24 Mm,75 Cm , Other Items , Nasal Merocele 8Cm , Nasal Merocele 10Cm , Lignocaine Spray 10 % , Inj. Lignocaine 4 % , E.T. Tube 5.5 Cuff , Inj. Amioderone , Inj. Mephentermine , Inj. Ephedrine , Inj. Nitro Glycerin , Inj. Xylo Card (Loxicard) , Inj. Clonidine Hcl , Inj. Butorphanol , Inj. Etomidate Vial , Inj. Dexmedetomidine , Inj. Sodium Valproate , Inj. N/2 For D.M. , Inj. Sodium Chloride 3 % For Nebulization , Baby Diaper For Neonatal , Sanitizer 500 Ml , Tegaderm , Inj. Carbetocin 100 Mcg , Lappad All Size , High Flow Mask Paed , High Flow Mask Adult , Epidural Kit , Sanatary Pad (For Delivery Use) 10 Pcs , Trypan Blue Solution (Blue Dye) , Lens Blade (Side Pot) , Keratone , Tunnel Blade (Crescent) , Eye Drop Pilocarpine 2% , Inj. Pilocarpine , B.K. Traction , Inj. R.L. Glass Bottle 500Ml , Trochar Catheter (Chest Tube) , Caffeine Citrate Oral Solution 3 Ml Vial , Mct Oil 100 Ml , Hmf Sachet 1Gm , Safety Cup Goggles (Black) , Johnson Buds , Simco Eye Cannula 23 G , Diaper (Adult) , Bain Circuit , Et Stilate All Types , Shoe Cover , Electric Coutery Pencil , Baby Identification Tag , Cannula Fixer , Supra Pubic Catheter (Adult) , Syp. Zidovudine , Syp. Nevirapine , Dbs Card (Dried Blood Spot) , Electric Coutery Plate , Nib Cuff For Multi Para Monitor , Sodium Fluoride 500 Gm , Ambu Bag (Paed) Silicone , Ambu Bag (Adult) Silicone , Mackintosh , Gudels Airway All Size , Anti Septic Solution (Dettol Or Savlon Liquid) , Infant Nasal C-Pap Size 0 And 1 , Bougie , Disposable Needle Size No. 22, 23, 24, 26 , Laryngoscope Bulb , Laryngoscope Battery Holder , Weighing Machine (Digital ) Up To 200 Kg , Vicryl No. 8.0 Size Absorable Surgical Suture , Nylon No. 10.0 Sized Non Absorable Surgical Suture
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
37.
Defence #9578160 AOC
Tender For Provision Of Otm Accommodation (Phase -I) At Bagrakote Under Ge Sevoke; 1 BUILDINGS & STRUCTURE (Sch A PART-I) 2 Lump sum price worked out by the Contractor for “BUILDINGS & STRUCTURE”as listed in Schedule ‘A’ Part-I.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 36,31,20,000.00 inserted by the MES in Schedule ‘A’ Part-I. 3 EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT (Sch A PART-II) 4 Lump sum price worked out by the Contractor for “EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT”as listed in Schedule ‘A’ Part-II.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 52,49,260.89 inserted by the MES in Schedule ‘A’ Part-II. 5 INTERNAL WATER SUPPLY (Sch A PART-III) 6 Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY”as listed in Schedule ‘A’ Part-III.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 46,308.98inserted by the MES in Schedule ‘A’ Part-III. 7 INTERNAL ELECTRIFICATION (Sch A PART-IV) 8 Lump sum price worked out by the Contractor for “(INTERNAL ELECTRIFICATION)”as listed in Schedule ‘A’ Part-IV.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 96,32,540.67 inserted by the MES in Schedule ‘A’ Part-IV. 9 ROAD, PATH & CULVERT (Sch A PART-V) 10 Lump sum price worked out by the Contractor for “ROAD, PATH & CULVERT)”as listed in Schedule ‘A’ Part-V.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 86,86,643.57 inserted by the MES in Schedule ‘A’ Part-V. 11 SEWAGE DISPOSAL (Sch A PART-VI) 12 Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL”as listed in Schedule ‘A’ Part-VI.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 23,70,861.02inserted by the MES in Schedule ‘A’ Part-VI. 13 AREA DRAINAGE(Sch A Part-VII) 14 Lump sum price worked out by the Contractor for “(AREA DRAINAGE)”as listed in Schedule ‘A’ Part-VII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 64,06,702.01 inserted by the MES in Schedule ‘A’ Part-VII. 15 CHAIN LINK FENCING AND GATE (Sch A PART-VIII) 16 Lump sum price worked out by the Contractor for “(CHAIN LINK FENCING AND GATE )”as listed in Schedule ‘A’ Part-VIII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 16,99,635.84 inserted by the MES in Schedule ‘A’ Part-VIII. 17 EXTERNAL WATER SUPPLY (Sch A PART-IX) 18 Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY”as listed in Schedule ‘A’ Part-IX.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 4,04,432.28inserted by the MES in Schedule ‘A’ Part-IX. 19 EXTERNAL ELECTRIFICATION (Sch A PART-X) 20 Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIFICATION)”as listed in Schedule ‘A’ Part-X.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 66,58,717.06 inserted by the MES in Schedule ‘A’ Part-X. 21 FIRE FIGHTING & FIRE ALARM SYSTEM (Sch A PART-XI) 22 Lump sum price worked out by the Contractor for “FIRE FIGHTING & FIRE ALARM SYSTEM”as listed in Schedule ‘A’ Part-XI.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 32,30,010.00inserted by the MES in Schedule ‘A’ Part-XI. 23 HOT WATER SUPPLY (Sch A PART-XII) 24 Lump sum price worked out by the Contractor for “HOT WATER SUPPLY”as listed in Schedule ‘A’ Part-XII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 6,63,253.28 inserted by the MES in Schedule ‘A’ Part-XII. 25 LIGHTNING PROTECTION (Sch A PART-XIII) 26 Lump sum price worked out by the Contractor for “LIGHTNING PROTECTION”as listed in Schedule ‘A’ Part-XIII.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 29,821.10 inserted by the MES in Schedule ‘A’ Part-XIII. 27 COOLING APPLIANCES (Sch A PART-XIV) 28 Lump sum price worked out by the Contractor for “COOLING APPLIANCES”as listed in Schedule ‘A’ Part-XIV.Representing ** ___ % ______ percent *Above / Below the lump sum price ofRs. 4,24,714.16 inserted by the MES in Schedule ‘A’ Part-XIV. 29 DEMOLITION & DISMANTLING (Sch A PART-XV) 30 Lump sum price worked out by the Contractor for “DEMOLITION & DISMANTLING”as listed in Schedule ‘A’ Part-XV.Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 12,25,480.08 inserted by the MES in Schedule ‘A’ Part-XV. 31 MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (Sch A Part-XVI) 32 INTERNAL WATER SUPPLYS&F ofGun-metal, globe or gate valve, 65 mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 33 S&F ofGun-metal, globe or gate valves, 80 mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 34 S&F 15 mmbore brass CP mixer for hot & cold water screwed down for iron / CPVC pipe and fixed (3-in-1) complete all as specified and directed. 35 S&F 15 mm bore fancy type, chromium plated basin inlet connection (angle valve), cast copper alloy, screwed down, high pressure, screwed both ends for iron / CPVC pipe for unions and fixed complete all as specified and directed. 36 S&F two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron / CPVC pipe 15 mm borecomplete all as specified and directed. 37 S&F health faucet with stainless steeltube and wall hook suitable for 15 mm dia pipe with 1 meter long flexible tube including making connections and fixed in pipe etccomplete all as specified and directed. 38 INTERNAL ELECTRIFICATIONS & F modular type 3 pin 20 A socket with SP MCB, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed.(AC& GYSER POINT) 39 S & F MCB 25A, 230 V, 50 Hz, 2P MCB (C curve) conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified in IS 732: 2019 and directed. 40 All as per Srl Item No. 16.08 here-in-above but for 16A, 230 V, 50 Hz, 2P MCB (C curve) complete all as specified and directed. 41 S&F load line distribution board TPN vertical, 6 way double door type, fixed on wall semi flush with incoming MCCB 4 poles and, busbars , neutral link, blanking plates complete with all accessories all as specified and as directed. NOTE : Outgoing MCBs shall be measured and paid separately. 42 S & F of 125A, 4 pole moulded case circuit breaker (MCCB) with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% = Icu = 16 kA as per IEC 60947-2 and suitable for 3-Phase, 415 V, 50 Hz electric supply complete all as specified and directed. 43 S & F 40 W surface / wall mountedLED batten capable of delivering minimum 2000 lumen, having PC diffuser, luminous efficacy of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K,independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. 44 S & F 9W LED Study light having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz complete all as specified and directed. 45 S & F surface mound Flame proof LED Batten, 20W, CRI > 70, suitable for Hazardous area group IIA and IIB and zone 1 & 2, IP 65 Protection with 100 lumens/watt with Die Cast Aluminium Housing, THD < 15% complete all as specified and directed. 46 SEWAGE DISPOSALConstruction of Septic tank (for 10 Users) conventional type, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Brick wall RCC M-25 in Roof Slabetc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.30 meter complete all as shown on TD drawings No CESZ/2019/TD-115 Sheets 1/4 to 4/4 and directed.NOTE : Necessary Earthwork shall be included in the quoted rate. 47 Construction of Soakage wells excavation, in any type of soil, walls of honey combed masonry, RCC cover slab in M25, bat filling interconnecting pipes of DWC complete filled with brick bats of size 1.20 M dia X 3.00 M effective depth complete all as shown on TD drawings No SZ/TD-14 Sheets 1/1 and directed.NOTE : Necessary Earthwork shall be included in the quoted rate. 48 M&L for 200 mm (inner dia) DWCPE (SN-8) pipe as per IS:16098 (Part-I) with all fittings and laid in trenches and jointed complete all as specified and directed. 49 EXTERNAL WATER SUPPLYSupply, laying and testing of 150 mm bore ductile iron pressure pipe socket and spigot end, class K-7, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for push - on- joint with inside cement mortar lining, internal metallic zinc coationg and external black bitumen coating laid in trenches etc complete all as specified and directed. 50 Supply, laying and testing of 100 mm bore ductile iron pressure pipe socket and spigot end, class K-9, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for push - on- joint with inside cement mortar lining, internal metallic zinc coationg and external black bitumen coating laid in trenches etc complete all as specified and directed. 51 M&L for construction of brick masonary valves pit of internal dimensions 900mm x 900 mm x 900 mm complete and fabrication of 3.0 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as shown TD Drawing all as specified and directed. 52 S& F Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Water supply mains of size 150 mm dia complete all as specified and directed. 53 Supply and fix valve, reflux with by pass arrangement 150 mm (6) dia complete all as specified and as directed. 54 M & L for Trial bore of 200 mm dia below ground level in any kind of soil strata including hard stone/ boulder by deploying direct/reverse or universal method to achieve desired depth including cost of consumable stores like fuel,lubricants, bentonite mud, material and transportation of machinery etc., complete all as specified and as directed..NOTE : -(a) Erection and dismantling of boring plant including all arrangement for the transportation of boring equipment to site of work from the store of contractor at site and back are to be made by contractor at his own cost. All rates should be quoted for supplying the material at site of work.Pits for collection of water and water for drilling tubewell will be arranged by the firm/contractor at site his own cost.(b) Borewell to be done subject to permission by CGWB. 55 M & L for electro logging for identification of aquafier zone with report enterpretation, including fabrication of strata chart in wooden glass frame and strata box of size 1000x600x100mm made by woodshisham and 3mm glass in front of box for display in pump house complete all as specified and directed. 56 Reaming up to 350 mm dia for depth upto 60 mtr from ground level complete all as specified and directed. 57 Reaming up to 300 mm dia for depth from 60mtr from ground level to 110 mtr complete all as specified and directed. 58 S & F of including lowering in borewell ERW/ MS casing pipe electric resistant welded pipe with socket confirming to IS:3589 of 250mm dia and thickness 8mm including two coats of anti corrosive bituminous paint of approved brand complete all as specified and directed. 59 S & F of including lowering in borewell ERW/ MS casing pipe electric resistant welded pipe with socket confirming to IS:3589 of 200mm dia and thickness 8mm including two coats of anti corrosive bituminous paint of approved brand complete all as specified and directed. 60 All as per Srl Item No. 16.41 here-in-above but slotted pipe as per IS: 8110 strainer complete all as specified and directed. 61 S & F of end cap of for 200mm dia MS pipe, complete all as specified and directed. 62 S & F of MS reducer socket of 250x200 mm dia to be fabricated out of 12 mm sheet plate with the housing pipe of 250 mm dia for fixing 250 mm dia MS pipe to 200 mm dia MS pipe, complete all as specified and directed. 63 S & F of well cap of for 250mm dia MS pipe complete all as specified and directed. 64 S & F of clamp of size 150mmx10mm of length 1.5mtr including MS nut bolts of 10mm dia and washer etc for supporting casing pipe complete all as specified and directed. 65 S & F of clamp of size 150mmx10mm of length 1.0 mtr including MS nut bolts of 10mm dia with washer etc for supporting column pipe complete all as specified and directed. 66 S & F Steel wire rope, PVC insulated of size 10 mm dia of suitable size/ length as directed with clamps, nuts & boltsand washers etc for holdingcolumn pipes/GI pipes of submersible pump set, complete all as specified and directed. 67 S & F of cage fabricated from strips of size 25x4suitable for protection of submerssible pump set with two coat of anti corrosive black bituminous paint, complete all as specified and directed. 68 S & F of flat submersible cable 3 coremulti stranded copper conductor of size 6 sqmm ISI marked, complete all as specified and directed. 69 Supply and filling pebels of size 6 to 10mm around the casing pipe of borewell including all lead and lifts free from dust dirt or vegetation manure, complete all as specified and directed. 70 Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water of borewell using air compressor of 350psi , 600cfm pressure for required number of hours including fuel etc.,complete all as specified and directed. 71 Conducting following tests for the bore well to determine safe water pumping from government approved laboratory including submitting the report to the department, complete all as specified and directed :-(i) Yield Test(ii) bacteriological Test(iii) chemical test (systematic analysis) 72 S & F of FASD submerssible motor panel starter of capacity 7.5 HPincl overload,single phasing prevention, complete all as specified and directed. 73 Design, supply, installation, testing and commissioning Iron Removal/ water treatment Plant of capacity 40 Cum/Hr (8000 GPH) complete to achive the permissible parameters of of treated waterconsisting of 01 set multi grade filter, 01 set Oxidation Chamber, 01 Set of Chemical Dosing System for Soda Ash, 01 Set ofChemical Dosing System for Sodium Hypo-chloride. The plant incld allinterconnecting piping valves & other accessories incld necessary internal cabling, termination support stays, clamps, inlet & outlet pipe connection for filtration and back wash etc confirming to relevant IS, foundationworks as per OEM. The plant to be painted with 2 coats of non-toxic anti-corrossive epoxy paint (suitable for drinking water quality) inside and 2 coats of synthetic enamel over a coat of red oxide primer complete comprising of the followings :- Item Continued as 16.43 to 16.46 74 (a)Oxidation Chamber, vertical cylindrical type, fabricated vessel of suitable size as per IS-2062, incld pipe line 100 mm dia, butterfly valve of suitable size incld 2 nos. pressure gauge ,sampling cocks filled with Oxidation Chamber. Theshell thickness shall be of 6 mm and dished end having 6mm and bed plate under drain collecting system will be strainer on bed plate. Diameter of vessel shall be - 900MM and Height on Straight - 750MM. (Necessary Civil work, foundation, PCC, RCC, excavation , returning and filling etc shall be deemed included in the quoted rate). - 01 Set 75 (b)Multi Grade Filter, vertical cylindrical type , MS fabricated vessel of suitable size as per IS-2062, incld pipeline 150 mm dia, butterfly valve of suitable size incld 2 nos. pressure gauge, sampling cocks filled with Sand media having 915 mm media depth. The shell thickness shall be of 6mm and dished end having 6mm with header and lateral collecting system. Multi Grade filter should have Epoxy paint from inside and outside red oxide paint. The shell shall also be provided with adequate size of air ventline with valve etc. Diameter of vesselof MGF shall be - 2000 MM and Height on Straight - 1875MM. (Necessary Civil work, foundation, PCC, RCC, excavation , returning and filling etc shall be deemed included in the quoted rate). - 01 Set 76 (c) Chemical Dosing System (CDS-4 with High Speed Agitator ) for Soda Ash at raw water collection tank with electromagnetic metering run on 220 V AC for 100% accurate dosing with all electrical connections with 200 ltrs PVC tank- 1 No. (Necessary Civil work, foundation, PCC, RCC, excavation , returning and filling etc shall be deemed included in the quoted rate).- 01 Set(d) Chemical Dosing System (CDS-4 with High Speed Agitator) for Sodium Hypo-chloride after iron Removal Plant with electromagnetic metering pump run on 220 V AC for 100% accuratedosing with all accessories with 200 ltrs PVC tank- 2 Nos. (Necessary Civil work, foundation, PCC, RCC, excavation , returning and filling etc shall be deemed included in the quoted rate).- 01 Set 77 Note :- (i)Minimum working pressure of the plant shall be- 2 Kgs/Sqcm Maximum working pressure of the plant shall be - 3.5Kgs/Sqcm(ii) Backwashing shall be 30 minutes at an interval of 8 hrs.(i) Contractor has to carry out necessary water testing and design of the plant accordingly. Chemical / bacteriogical test of water has to be recorded and submitted by the contractor before & after filteration. (ii)All necessary pipes, flange, fittings, valves for bypass pipe line connection, and inter connetion the plantdeemed to be included to the quoted rate. 78 Supply, installation, testing and commissioning multi stage submersible pump setwith bronze impeller, directly coupled with motor, suitable for 200/250 mm bore well water lubricated against minimum total head 45 meter and discharge min 600 LPM operated on AC 3 phase, voltage range 200V-440V, 50 Hz. The motor casing shall be of stainless steel, pump shaft/ motor shaft shall be of stainless steel, pump bowls shall be of high graded cast iron all as specified and directed. The pump and motor shall comply to all the requirements of relevant IS. NOTE :The pump size, i.e head and discharge mentioned is minimum required at site, however, the actual size shall be arrived after doing necessary yield test. 79 Supply,installation, testing and commissioning open well Submersible pump of capacity 10 HP,electric driven 415 V, TPand completeinclusive ofsubmersible cable and starter including dry run preventor and single phasing preventor complete all as specified and directed. 80 M&L for DI fittings for spigot and socket pipes of size 80 mm to 350 bore such as bends(any type,radius and angle) tapers any type (straight, bend, increasing,decreasing or double socket etc)Tee pieces single branch, Yjunction, double branch, cross(all sockets or socket and spigot) collars caps and plugs complete all as specified and directed. 81 FIRE FIGHTING & FIRE ALARM SYSTEMSupply, installation, testing, and commissioning of Fully automatic DOL starter, suitable for the booster pump, complete with contactors, push button, LED type indicators, auto/manual selector switch, overload protection, current sensing type single phase preventer complete with all accessories and wiring etc.with ncomplete all as specified and directed. 82 M & L for 2 core, 2.5 sqmm (for instrumentation)low smoke zero halogen (LS0H) flame retardant Fire alarm cable, conforming to BS 7629-1, BS 6387 & BS EN 50200 and rated for 500 V, drawn through concealed PVC conduit and having plain annealed stranded copper conductor with primary insulation of glass mica Fire resistant tape and secondary insulation of high performance silicone rubber, earth/drain wire of annealed tinned copper, electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655, suitable for operating temperature range -30 ˚C to +70 ˚C and minimum bending radius being 6 times the overall cable diameter, RED in colour, including laying, termination and ferruling complete all as specified and directed. 83 M & L for 3 core, 2.5 sqmm (for auto start/stop panel)low smoke zero halogen (LS0H) flame retardant Fire alarm cable, conforming to BS 7629-1, BS 6387 & BS EN 50200 and rated for 500 V, drawn through concealed PVC conduit and having plain annealed stranded copper conductor with primary insulation of glass mica Fire resistant tape and secondary insulation of high performance silicone rubber, earth/drain wire of annealed tinned copper, electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655, suitable for operating temperature range -30 ˚C to +70 ˚C and minimum bending radius being 6 times the overall cable diameter, RED in colour, including laying, termination and ferruling complete all as specified and directed. 84 S & F of orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete all as specified and directed. 85 S & F ofCL 150 # rated ball valve25 mm NB, designed & manufactured as per IS 9890: 1981 and tested as per BS 6755-1, having floating type three piece design, CS body, SS- 304 ball, PTFE seal / packing / gasket, CS fastners and lever and screwed / socket weld end connection, etc. with accessories complete all as specified and directed. 86 S & F ofCL 150 # rated ball valve80 mm NB, designed & manufactured as per IS 9890: 1981 and tested as per BS 6755-1, having floating type three piece design, CS body, SS- 304 ball, PTFE seal / packing / gasket, CS fastners and lever and screwed / socket weld end connection, etc. with accessories complete all as specified and directed. 87 M & L for FM approved and UL listed, PN 1.6 rated lever operated, wafer type CI butterfly valve, 100 mm NB, conforming to IS 13095: 1991,fitted with visual indicator & temper switch, having Cast iron (CI) body with ductile iron EPDM coated disc, SS431 stub shaft, PTFE bushing, flange drilling standard end connection conforming to IS: 1538- 1993 along with necessary accessories complete as specified and directed by the engineer-in-charge (for Zone control valve assembly). 88 M & L for FM approved and UL listed 25 mm NB compact 3 position ball valve with drain orifice (Test and drain valve) to test and drain water flow through sprinkler systems having OFF-TEST-DRAIN position, integral sight glass, rated pressure 300 psi, orifice size 15 mm and K factor 5.6, conforming to NFPA 13, along with necessary accessories complete as specified and directed. 89 S & F 6 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed by the engineer-in-charge. NOTES: [i] Operating temperature :-300C to + 550C[ii] Performance criteria : Discharge time not less than 45 sec , throw not less than 4 meters[iii] Hydro test and burst pressure test : Shall pass hydro test pressure of 35 bars 2.5 minutes and with stand a burst pressure of 55 bar 90 S & F of the following type of signages made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners as specified and directed:-Item Continued as 16.60 & 16.61 91 Sign of size 250 mm X 300 mm reading IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE in 12.5 mm block letters in red and white background, properly spaced to provide good legibility located directly above the call-button and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level. 92 Sign of size 150 mm X 600 mm, posted and maintained at each lift landing and on the side of the stairway door from which egress is to be made on every floor, indicating the lift / lift bank / stairway by an alphabetical letter in bold type and at 75 mm high letters in red and white background, securely attached to the side of the stairway door from which egress is to be made in a way that the bottom of the sign is not above 1.5 m from the finished floor level. 93 S & F Galvanised Iron Fire bucket 9 ltr Red in colourheavy duty all as specified and as directed 94 EXTERNAL ELECTRIFICATIONS & L 50 mm outside dia double corrugated pipe(DWC) ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed. 95 S & L 75 mm outside dia double corrugated pipe(DWC) ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed. 96 S & L 90 mm outside dia double corrugated pipe(DWC) ISI marked for enclosing cable below ground/road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement etc complete all as specified and directed. 97 Design, Manufacturing, Supply, Installation, Testing and Commissioning of 3 way 12 kV rated Ring Main Unit ofand LT Fault Level 21KA , consisiting of 630A12 kV rated , 1 nos load break switchesas incomers &2 nos motorized type VCB as outgoings with metering modules along with necessary Earth Switches,battery and battery charger for shunt trip arrangement andMotor and other auxiliary circuit operation, HT CopperBus bar as per detailed description as follows:- Item Continued as 16.67 to 16.74 98 RMU Construction: The switchgear and busbar shall all be contained in a stainless steel enclosure filled with SF6 at 0.3 bar (300 hPa) relative pressure to ensure the insulation and breaking functions. Sealed for life, the enclosure shall meet the sealed pressure system criterion in accordance with the IEC 62271-1 standard (§ 3.6.5.4): a volume for which no further gas processing is required during its entire expected life”. In addition, manufacturer shall confirm that maximum leakage rate is lower than 0,1 % / year. It shall provide full insulation, making the switchgear insensitive to the environment (temporary flooding, high humidity...), IP67 degrees of protection in accordance with recommendation IEC 60529 § 14.2.7. Thus assembled, the active parts of the switchgear shall be maintenance-free and the switchboard shall be low-maintenance. The switchboards drives shall have an IP2X protection index. The tank shall be made of at least 2mm unpainted stainless steel.SF6 gas is the preferred dielectric medium for MV RMUs. Oil filled switchgear will not be considered.SF6 gas used for the filling of the RMU shall be in accordance with IEC 60376.Any accidental overpressure inside the sealed chamber will be limited by the opening of a pressure limiting device in the lower part of the enclosure. Gas will be released to the rear or the bottom of the switchboard away from the operator. Number of mechanical operations of Circuit breaker 2000 O/C , Number of electrical operations at full loop current for LBS: 100 O/C , Number of electrical operations at full loop current for CB: 2000 O/C,. Manufacturer shall provide type test report to prove compliance with IEC 62271-200 Annex A, Internal arc classification class AFL with 21kA 1s for the SF6 enclosure. Make of the RMU, vaccum intrtupter , relay & meter shall be of same OEM. All the test certificate shall be in the name of the OEM only . If there is any name change / acquisition by other OEM happened for the RMU then test cerificates shall contain the new OEM name only. 99 HT system : 3 phase -3 wire , HT Fault level21 kA, Power System earthing - solindly earthed at up stream source, HT Copper Bus with Short Time Curent rating 21 kA for 1 Sec ( 3Sec), Continuous current rating at least 630 A. Enclosure of RMU must be IAC rated for 21 kA for 1 Sec. Design ambient to be considered as 40 Deg C.HT Circuit Breaker : i) There shall be 1nos.load break switches as incomings and 2 nos 12 kV rated VCBas outgoing ( total 3 nos.) . The circuit breakers shall behorizontal isolation - horinzontal draw out type. All of the switchgear shall be capable of withstanding this current without any damage being caused, in accordance with the recommendations IEC 62271-1 and IEC 62271-200.Loss of service continuity class: LSC2Aii) The Circuit Breaker must be rated for 12 kV ( nominal Voltage), 28 kV/75 kVp ,3 Phase, 50 Hz, Short Circuit Fault Level of 21 kA for 1 secs. Iii) No. Of Close Coils - 01 no. operable at 24 V DC (85% - 110%) , No. of Trip Coils - 02 nos. ,operabale at 24 V DC ( 70% - 110%) for shunt trip Feature forseries trip shall also be enabled. iv) Provision for supervision of the two indepandent Trip Circuits for the two Trip Coils to be provided. v)Switchgear classification: PM classvi) Loss of service continuity class: LSC2A 100 vii) Duty Cycle : O – 0.3sec – CO – 3min – CO, Vacuum Circuit breaker shall be of M2, E2, C2 duty and capable for minimum 100 short circuit breaking operation at full short circuit level.viii) STC rating 21 kA for 1 Sec (for Vacuum Interrupter).ix)Vacuum Interrupter must be hermetically sealed and must comply IEC 60056 ( along with latest amendments). x)Circuit Breaker to be equipped with Suitable tripping arrangement with push button, Mechanical counter to assess the total number of operations of the breaker, Mechanical ON / OFF indicator, Auxiliary switches, Auxiliary Contacts( at least 2 NO + 2 NC of Class 2 category), Emergency trip push button.xi) The Operating mechanism shall be spring charged motor operated type with Spring Charge Universal motor operable on 24 V DC / 230 V AC.xii)Suitable monitoring of Circuit Breaker status ( ON, OFF, Trip, CB Spring Charged), Trip Circuit Healthy / Unhealthy, DC healthy/unhealthyto be provided using IoT based online monitoring system using microprocessor / digital RTU with historical data saving, capable of updating status and sending alarm signal on IoT monitoring unit, GSM and GPRS platform through which live monitoring status and equipment reading and fault related history can be accessed by user remotely. 101 xiii) Voltage Presence Indicator shall be provided against each HT circuit ( against each VCB) on line side for knowing the presence of line enerzisation status.xiv)Number of Mechanical operations at full rated current for breaker: 2000 O/CHT CT /PT i) One set of 03 nos. ( for 3 phases) dual core Cast Resin CTs for Eachincomer VCBcomplying with IEC:60185 & IS 2705 ( along with latest amendments) , Core -1 - 400-200/1 A , 15 VA, Cl 0.5 for metering ; Core-2 - 400-200/1 A, 15 VA , 5P10 for Protection.ii) 01 no. of 03 phase Dual Core PT forHT bus ( 11 kV)with protection HRC fuseCore 1- 11kV-6 kV /√3 / 110V/√3, Cl 0.2s, 100VACore 2- 11kV- 6 kV /√3 / 110V/3, Cl 3P, 50VA 102 Multifunction Meteriii) 2 Nos. 3 phaseDigital Multifunction Meter6400NGwith Voltage, Amps, kWh, kW, P.F., Active, reactive, apparent energy , disturbance direction detection, Individual harmonic up to the 63rd harmonic. at least 256 samples/cyclewith ethernet Port with inbuilt webserver and complying to IEC 61557-12, IEC 62053-22 certified by third party laboratory.for each VCB panel ( 96 mm x 96 mm) , Flush mounted, Class 1 conforming to IEC 62053-22 ( along with latest amendments) .Protection Relayi) 2 Nos. of Numerical Type IDMT Relay (50/51, 50N/5IN) with two elements for overcurrent and earth fault having settings 50% to 200% for overcurrent and 20% to 80% for earth fault in equal steps with time and current settings and high set instantaneous unit. Additionally, condition monitoring CB wear, condition monitoring CT supervision, disturbance recorder, undervoltage & over voltage protection, trip circuit supervisioncan be measured through the relay. The device shall support webserver/web HMI through which we can monitor and control the relays over a ethernet Lan network. Licenses for theprogramming software shall be provided free of cost.The numerical relay shall have large mimic-based LCD screen display . .The relay shall have 8 Digital inputs and 8 Digital Outputs and one additional watchdog ouput.The device has to aloe controlling of min. six objects (circuit breakers, disconnectors and grounding switches). Controlling has to be done by “select-execute” or “direct control” principle. Controlling has to be possible by: through local HMI, remote communication, via digital input or via function key. Events has to be readable to SCADA systems, front panel or by setting software.The sample rate of the recording has to settable to 32samples/cycle.The devices shall provide storage up to events 2000 based on the resolution.The device shall support following communication protocols: Native IEC 61850 ed1 & ed2, Modbus TCP. The IEC 61850 communication has to support peer to peer communication (GOOSE) if requiredThe IEC 61850 interface must be able to configure through setting software. Also the same setting software has to be able to generate ICD filesThe device shall have KEMA IEC61850 edition 2 certificates. 103 ii) Master Trip Relay :High Impedance and High speed relay flush mounted having coil cut-off contact with at least 4NO and 4NC contact and electrical reset facility capable to make, carry and break trip coil current of Circuit Breaker and capable for future integration with SCADA.iii) Each VCB must have separate Anti Pumping Relay.Fault Passageindicator: 104 The FPI shall facilitate quick detection of faulty section of line. The fault indication may be on the basis of monitoring fault current flow through the device. The FPI should be self-powered and should have internal lithium battery for external indication and setting of FPI in the absence of current.The FPIs shall include:Fault detection - Phase to phase and Phase to earth faults.One potential-free output contacts for hardwiring to RTUs. On this basis, the SCADA/DMS will be able to monitor phase / earth fault condition.Local fault indications - LCD display on FPI front panel along with LED indication on front panel of RMU enclosure.Multiple reset option –End of time delay (Adjustable from 2 to 16 Hrs)Remote reset (Via potential free input contact of FPI)Manual reset (Reset button on front panel of FPI)Automatic reset on current restoration.The characteristics of the FPIs shall include:Phase fault thresholds configurable from at least 100 to 800 AEarth fault thresholds configurable from at least 20 to 200 AMultiple number of steps for adjusting phase and earth fault thresholds.Fault current duration range configurable from at least 40 ms to 100 ms in 20 ms steps and further 100 ms to 300 ms in 50 ms steps. Variations with respect to these characteristics may be acceptable as long as they prove applicable and provide the same or better flexibility. 105 Earthing The cables shall be earthed by an earthing switch with short-circuit making capacity, in compliance with IEC 62271-102 standard. The earthing switch can only be operated when the switch is open. The switch and earthing switch operating mechanism shall have a mechanical endurance of at least 1000 operations.Separate line side Earth switches shall be provided in each HT Circuit ( against each VCB)RMU Bushing & Cable termination:It is preferable to have all bushings accessible from the front of the RMU. Bushings along the sides or the rear of the RMU are not acceptable.For each cable compartment, the bushing shall be at the same height in order to facilitate a possible reversal of the cablesThe bushing should be conveniently located for working with cables specified and allow for the termination of these cables: -630 A M16 bolted connectors for switch-disconnectors and vacuum circuit breakers functions.The profiles of the cable connection bushings shall be in compliance with IEC-60137 standard.Cable clamps:A cable clamp arrangement must be provided for all network cables terminated on the RMU. Provision for Cable Entry: There shall be suitable provsion for Cable entry from bottom through 3 mm thick CRCA steel thick detachable gland plate along with provision for termination of 2 runs of 3 c X 400 Sq mm 11 kV (E ) , XLPE insulated Aluminium Cables ( for HT side) and at LT side runs of cables matching with outgoing MCCB current rating. 106 S&F 8.0 Mtr Long Hot Dip Galvanised Street Light Octagonal Pole with Foundation type Base Plate and Foundation Bolts and additional structural steel as reqd, dimentions of Pole as Top Diameter - 70 mm, Bottom Diameter- 130 mm, Section Length - 8000 mm, Thickness - 3 mm, Foundation type Base Plate (200 x 200 x 16 mm), Foundation Bolts - 4 Nos 20 mm dia, pitch circle dia 200 mm, bolt length 600 mm, projects bolt length 100 mm , with Single type arm bracket 1500 mm long , top dia 70 mm , suitable for LED Street Light fitting. The Pole shaft shall have octagonal cross section and continuously tapered with single longitudinal welding all as specified and as directed. 107 M&L for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings, complete all as specified and directed. 108 S&F factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque street light junction box of size 260 mm x 210 mm x 116mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact(IK 08) totally insulatedmade of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal , MCB SP 6 Amps rating 10 KA with locking arrangement and 2 Nos M40 size cable glandand one M32 size gland suitable up to 35 Sqmm cable etc complete all as specified and directed. . 109 S&F HT/LT made up of PCC block (1:3:6) type. C-1 using 20mm graded stone aggregated of size 900 mm x 300mm x 100 mm thick (45 Cm burried in ground) and properly painted as per approved colour Brown/Blue (HT/LT) and written both side with signed red colour paint( HT cable 11 KV orLT cable 1100 Volts) on Cable route marker including necessary excavation and earthwork complete all as specified and directed. 110 Supply, installation, testing and commissioning outdoor type stainless steel (SS 304) cubical enclosure compartmentalizedexterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shallbe made of 2 mm thickSS 304 sheet. The fixing of doubledoors shall be on SS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 304.Sliding handle and locking arrangement front and rear both side . Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. IP-55 class protection and mounted on channel 75 mm welded with panel of SS 304 with 04 Nos foundation bolt of size not less than20mm dia and 300mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked,1100 volts grade of appropriate size (but not less than 2.5 sqmm).Incoming :-(i) Aluminium busbar rating 600 Amps rating 4 Nos. (ii) MCCB 400 Amps 4 pole breaking capacity 36 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuitpro-tection having double insulation & positive insulation-01 No.Outgoing :-(i) MCCB 400 Amp 4 pole 01 Nos breaking capacity 36 KA , MCCB 63 Amp 4 pole 02 Nos breaking capacity 16 KA,, thermal magnetic release with Icu = 100% & rated impulse with stand volta.(Vimp) 8 KV with over current & short circuit protec-tion having double insulation & positive insulation featers. MCB SPN 32 Amp02 Nos. Item Continued as 16.80 111 (ii) Current transformer 100/5Amps class-1 15 VA - 1 Nos, Digital Ammeter with inbuilt selector switch -01 No, Digital Voltmeter with in built selector switch -01 No and Modular Indication lamp for main incomer LED type RYB (set of 3)-1 Set All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands.The various feeders shall be indicated by font size not less than 20 mmletters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape.Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class B, old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel.The platform shall be such that it is of a height 45 cm above the nearest road level. 112 Supply, installation, testing and commissioning outdoor type stainless steel (SS 304) cubical enclosure compartmentalizedexterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shallbe made of 2 mm thickSS 304 sheet. The fixing of doubledoors shall be on SS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 304.Sliding handle and locking arrangement front and rear both side . Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. IP-55 class protection and mounted on channel 75 mm welded with panel of SS 304 with 04 Nos foundation bolt of size not less than20mm dia and 300mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked,1100 volts grade of appropriate size (but not less than 2.5 sqmm).Incoming :- (i) Aluminium busbar rating 600 Amps rating 4 Nos. (ii) MCCB 400 Amps 4 pole breaking capacity 36 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuitpro-tection having double insulation & positive insulation-01 No.Outgoing :-(i) MCCB 100 Amp 4 pole 03 Nos, MCCB 63 Amp 4 pole 02 Nos breaking capacity 16 KA, MCCB 40 Amp 4 pole 01 Nos breaking capacity 16 KA thermal magnetic release with Icu = 100% & rated impulse with stand volta.(Vimp) 8 KV with over current & short circuit protec-tion having double insulation & positive insulation featers. (ii) Current transformer 100/5Amps class-1 15 VA - 1 Nos, Digital Ammeter with inbuilt selector switch -01 No, Digital Voltmeter with in built selector switch -01 No and Modular Indication lamp for main incomer LED type RYB (set of 3)-1 Set Item Continued as 16.82 113 All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands.The various feeders shall be indicated by font size not less than 20 mmletters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape.Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class B, old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel.The platform shall be such that it is of a height 45 cm above the nearest road level. 114 Supply, installation, testing and commissioning indoor type stainless steel (SS 316) cubical enclosure compartmentalizedexterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc. The enclosure shallbe made of 2 mm thickSS 316 sheet. All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 316. Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. IP-55 class protection and mounted on channel 75 mm welded with panel of SS 316 with 04 Nos foundation bolt of size not less than20mm dia and 300mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked,1100 volts grade of appropriate size (but not less than 2.5 sqmm).Incoming :- (i) Aluminium busbar rating 150 Amps rating 4 Nos. (ii) MCCB 63 Amps 4 pole breaking capacity 16 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuitpro-tection having double insulation & positive insulation-02 No ( for incomer mains and incomer DG supply) (iii) Onload change over switch 63Amps modular type - 01 nos(Note: Busbar will be connected at changeover output)Outgoing :-(i) MCCB 32 Amp 4 pole 03 Nos breaking capacity 16 KA thermal mag protection with Icu = 100% & rated impulse with stand voltage (Vimp) 8 KV with over current & short circuitpro-tection having double insulation & positive insulation, MCB TPN 40Amps - 02 Nos, 3 Phase timer switch 40 Amps- 1 Nos(ii) Current transformer 100/5Amps class-1 15 VA - 2 Nos, Digital Ammeter with inbuilt selector switch -02 No, Digital Voltmeter with in built selector switch -02 No and Modular Indication lamp for main incomer LED type RYB (set of 3)-2 Set (at both incomer MCCB)Item Continued as 16.84 115 All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947-II/IS 13947-II (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer. All out going feeder shall be connected by cable through suitable size gland plate / glands.The various feeders shall be indicated by font size not less than 20 mmletters using Acrylic sheet. The minimums clearance of bus bar shall be 32mm phase –phase and 26mm for phase to earth. The bus bar shall have colour coding with insulating tape.Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class B, old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel.The platform shall be such that it is of a height 45 cm above the nearest road level. 116 SEWAGE TREATMENT PLANT (STP)Design, Supply, Installation, testing & commissioning of PACKAGED Sewage Treatment Plant(NBF Model)of capacity 50,000 Ltrs per Day with FRP Intermediate Cum Treated Water Tank of 20 KL capacity and tertiary treatment based on principle of aerobic attached growth non clogging randomly Moving Bed Bio-reactor (MBBR) complete with Recirculation Pump(Non clog submersible type of capacity 9 m3/Hr, Motor-1HP, Head- 8m) - 01 No,Air Blowers twin lobe type of capacity 3.0 HP - 02 Nos, Filter feed pump (Non clog submersible type of capacity 18.0 m3/Hr, Motor-1 HP, Head- 15 m) - 2 Nos ,Pressure Sand Filter FRP based complete with connection pipes (capacity-3.0 m3/Hr, Max Pressure- 10 PSI)- 1 NosActivated Carbon Filter FRP based complete with connection pipes (capacity-3.0 m3/Hr, Max Pressure- 10 PSI)- 1 NosChlorine Dosing Pump of capacity 0-6 LPH- 1 NosMCC Control Panel ,FRP tank accessories , including all connecting PVC pipes and all others accessories and necessary civil works for installation as per recommendation of OEM.Note:-(a)The minimum life of STP shall be 15 years. A certificate from manufacturer shall be provided by the contractor.(b)The RCC Collection Sump of suitable capacity before STP and necessary pumping arrangement (as required) is deemed to be included in the rate quoted by the contractor.(c)All accessories required to achieve the outlet parameter shall be included in the quoted rate.(d)Necessary arrangements to accomodate the inlet sewer Pipe line as per invert level deemed to be included in the quoted rate.(e)The contractor has to get the design and other parameters for complete sewage system including STP approved from GE before placing of order for procurement 117 COOLING APPLIANCESSupply , installation, testing & commissioning of refrigerator, ISI marked electric driven , single phase having capaciy 360 ltrs or nearest higher size , frost -free smoothflow type seprate chill compartment with plastic shelves, Ice maker unit, vegetable/fruit drawer, body colour as approved with suitable lighting arrangement working with non-CFC refrigerant & 3 star rated including electric connection complete all as specified and directed. 118 Supply , installation, testing & commissioning of refrigerator, ISI marked electric driven , single phase having capaciy 310 ltrs or nearest higher size , frost -free smoothflow type seprate chill compartment with plastic shelves, Ice maker unit, vegetable/fruit drawer, body colour as approved with suitable lighting arrangement working with non-CFC refrigerant & 5 star rated including electric connection complete all as specified and directed. 119 Supply,Installation, testing and commissioning of copper wound volatge stablizer , ISI marked for automaticoperation , single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stablization at 230 V with accuracy of +/- 2.5% with high & low voltage cut out & time delay & of capacity 01 KVA incl electric connection complete all as specified and directed. 120 Supply,Installation, testing and commissioning of copper wound volatge stablizer , ISI marked for automaticoperation , single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stablization at 230 V with accuracy of +/- 2.5% with high & low voltage cut out & time delay & of capacity 02 KVA incl electric connection complete all as specified and as directed 121 DG SETSupply, installation, testing and commissioning totally enclosed (silent operation with canopy, CPCB-IV+ complaint), static type deidel engine driven, liquied cooled, generating set of 30 KVA, 24KW capacity accommodated with accoustic encloser (at 0.8 lagging P.F), 415V,50Hz, 3 phase system & for 0.85 load factor , base plinth as per manufacturer recommendation, (A) Disel Engine:- Diesel engine shall be 4 stroke liquid cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at ambient temp of 50 dgree celcius, 50% RH & 1000m above MSL, electronic governer, confroms to BS:5514/ISO 3046, BS 649,IS 10000 with capacity of 10% overload for one hour in every 12 hours of continuous operation. The engine shall have noise limit of 75 dB(A The OEM shall undertake type approval and conformity of production certificate for emission standard for engine from agencies approved by GoI. Copy of the same shall be produced,(A1) Air intake system(i) Air intake manifold,(ii) Dry type air cleaner(A2) Exhaust system(i) Dry exhaust manifold with residental silencer and catalytic converter(A3) Cooling system(i) Engine water pump(ii) Radiator with fan(iii) coolant additive concertrate(A4) Lubricant system (i) Oil pan(ii) Engine mounted lube Oil pump (iii) Lube oil filter(A5) Starting System,(i) 12/24 V DC starter motor, voltage regulatorsItem Continued as 16.91 to 16.94 122 (ii) 12/24 V DC alternator for battery charging, (iii) 12/24 V suitable maintenance free battery of suitable capacity(A6) Engine mounted microprocesser based (perferably) instrument panel with digital display for the following:-(i) LED indicating lamps-for Genret running, remote start, shutdown, warning, manual, auto and stop(ii) Data Logs-engine run time and controller on time(iii) Start/Stop switch with key(iv) Indication/Display of for water temp, lub oil pressure, lub oil temp, battery charging,RPM, over speed, low lub oil trip, Engine hours(v) Engine and alternator data - startingf batter voltage, Engine running hours, engine temp, engine oil pressure, alternator voltage, current, KVA, frequency, KWH shall be displayed.(B) protection to Genret, (i) Low lube oil pressure warning/shutdown, (ii) High engine temp warning/shutdown,(iii) Low coolant temp warning, (iv) Sensor failure indication,(v) Low/High battery voltage warning,(vi) weak battery warning, (vii) fail to start shutdown,(viii) Cranking lockout, 123 (ix)High/Low AC voltage shutdown,(x) under/over frequency shutdown,(xi) loss of sencing voltage shutdown.(C) Others(i) AVM Pads, (ii) First fill of lubricating oils(iii) flywheel with housing(iv) Residental silencer,(D) Alternator synchronous alternator copper wounded rated 30 KVA, 415 volts, 1500 RPM,3 phase,50Hz,AC supply with 0.8 lagging power factor at 50 degree c, 50% RH and at 500 MSL, brushless type, self exicited, SPDP encl , contineous duty, voltage regulated through AVR conforming to IS:4722 with class F/H insulation. The sailent feature are as under: (a) Permanent lubricating beraing (b) Permissible overloading of 10% for one hour in every 12 hrs of contineous operation (c) permissible unbalancing capability minimum 25% per phase .(E) ACCOUSTIC ENCLOSER FOR DG SET :-S & F accustic enclosers suitable for 30 KVA capacity diesel generator set duly fabricated of channel and CRCA sheet 2 mm of required size having doors , insulation sides and top by minral rock wool confirming to IS-8183 of adequate thickness accoustic louvers / outlet ventilation system etc. complete as per manufacturers instruction with wiring and lighting arrangments duky painted of three coats of delux gloss synthetic enamelled paint over a primer coat or as directed of suitable size all as requried at site and comprising of the following:- (i) Base: MS channel fabricate MS channel made out of 5 mm thick MS sheet of ISMC suitable section, (ii) Structure heavy duty rectangular MS box channel , (iii) Doors fabricated from MS CRCA 2 mm thick air tight with neoprene rubber gasket and gun metal heavy duty spring loaded locks, 124 (iv) Out side cover : Made out of 2 mm thick ,(v) Accoustic insulation(side & top) sound proffing mineral rock wool slab thickness 100 mm of density 96Kg/m3 confriming to IS 8183 , covered by fire resistant fiber tissue as per manufacturer recommendation. Test report from original manufacturer to be submitted before incorporation in the work authenticity of material, (vi) Inspection port : Aluminium frame with double walled glass fixed type sealed with neoprene rubber gasket for viewing instrument panel. (F) FOUNDATION :- PCC Foundation M 20 ( or as per manufacturere design ) , 450 mm overall height , 300 mm above floor level and 150 mm below floor level of requried size. The price of foundation of DG Set is included in quoted rate. (G) FUEL TANK:- One no of sheet metal steel tank made out of 3.0 mm thick MS sheet of suitable capacity of hold diesel sufficient for 12 hours running at full load , tank shall be fitted with incanopy as per manufacturers design including the following:- (i) Level indicator to indicate level of diesel in tank,(ii) Drain plug with 2.0 mtrs pipe for drain oil, (iii) fuel strainer, (iv) pipe for fuel,(v) air vent. 125 NOTE:- (a) Generating set will be placed on suitable foundation as recommended by manufacturer and cost thereof shall be included on the prices quoted. (b) Tools shall be supplied as per manufacturers instruction and cost therof shall be included in the price quoted. (c) DG Set shall be placved at the site directyed by Engr-in-Charge. (d) Testing of DG Set shall be done as per relivant IS clause or min 10 hour running with 01 hour with no load, 02 hr with 25% load, 02 hrs with 50% load, 02 hrs with 75% load, 02 hrs with 100% load, 01 hr with 110% load. The required Fuel and artificial load/tools, etc to be included in quoted rate. 126 DEMOLITION & DISMANTLINGTaking down carefully old unserviciable DB including of any size/way complete including MCBs for keeping in safe custody or for taking credit all as directed. 127 Taking down carefully old unserviciable service cable of any size for keeping in safe custody or for taking credit all as directed. 128 Taking up or down from any position existing CI water tubing and connections carefully or for taking credit complete all as specified and as directed for 100 mm size 129 Taking up or down from any position existing CI water tubing and connections carefully or for taking credit complete all as specified and as directed for 100 mm size 130 Taking down carefully old unserviciable sluice valve 100 mm for keeping in safe custody or for taking credit all as directed. 131 Taking down carefully old unserviciable sluice valve 150 mm for keeping in safe custody or for taking credit all as directed. 132 Taking down carefully old unserviciable gate valve 25 mm for keeping in safe custody or for taking credit all as directed.
Contract Date: Feb 12, 2026 Contract Value : ₹ 39.08 Crore
Statutory Bodies & Commissions/Committees No of Bidders 9
West Bengal View Result →
38.
Petroleum and Natural Gas #9544088 Technical Bid
Tender For Composite Works For Ambient Air Heating System Project At Kll Dabhol; 1 PIPING-OFFSITES 2 PIPING (ABOVE GROUND) :-Transportation of all piping items from Owners storage point to work site/work shop; fabrication including cutting, edge preparation, (inclusive of grinding the edges of pipe, pipe spools, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating wherever required, welding, threading, and laying of pipes and pipe spools (spools along with supports) of all types and thickness over sleepers, overhead on racks and at all elevations, hook-ups with existing piping, connecting with equipment nozzles, strainers, steam traps, static mixers, sight flow indicators, thermal sleeve, orifice assemblies, spray nozzles, rotameters, tappings for pressure gauges, thermowells, sample connections, sample coolers, closed sample system cabinets etc. and fixing of gaskets, bolts, nuts including application of torque wherever requiredandall other inline instruments and fittings, like elbows, reducers, tees, flanges, spectacle blinds and spacer and blinds, piping specials such as mitres and fabricated fittings, vents, drains (but excluding reinforcingpads), SW valves upto 1.5 NB, Steam Supply/ Condensate Recovery stations(Cast/Fabricated), Supplyandwelding of Strip as per EIL Std 7-51-0112 to all pipes before hydro-testing at exit points of Units for earthing purpose; alignment, cleaningandflushing by water/compressed air,hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified draining, drying by compressed air, performing Positive Material Identification(PMI) using alloy analysers, completing all such works in all respects (including preparation of isometrics as mentioned in the Scope of Work for the job) as per the specifications, drawings and instructions of Engineer-in-Charge. PMI shall be performed by third party as defined in PMI spec.Rates for tubing (if any) shall include rates for valves, fittings, all in line instruments and testing etc. Carbon steel piping includes LTCS piping also. Erectionof all inline instruments like flow instrumentsandspecialty items like static mixers, sample coolers, thermal sleeve, air mixers, exhaust head, rupture disk, flow meters, venturi tube, flame arrestor, thermal flow switch etc. except valve shall be considered as part of piping and separate payment shall not be made on this account. Note : Contractor to refer to Instrumentation SOR for specific details and rates of Instrumentation items not covered herein. 3 CARBON STEEL PIPING (NON IBR); THK. <= 10MM 4 FABRICATION (BUTT WELD- MANUAL) 5 NB UPTO 1.5 INCH 6 NB 2 INCH - 6 INCH 7 NB 8 INCH - 14 INCH 8 NB 16 INCH - 24 INCH 9 NB 26 INCH - 36 INCH 10 FABRICATION (FILLET WELD) 11 NB UPTO 1.5 INCH 12 ERECTION (OTHER THAN SPOOL) 13 NB UPTO 1.5 INCH 14 NB 2 INCH - 6 INCH 15 NB 8 INCH - 14 INCH 16 NB 16 INCH - 24 INCH 17 NB 26 INCH - 36 INCH 18 CARBON STEEL PIPING (NON IBR); THK. > 10MM AND <= 20MM 19 FABRICATION (BUTT WELD- MANUAL) 20 NB 8 INCH - 14 INCH 21 NB 16 INCH - 24 INCH 22 NB 38 INCH - 48 INCH 23 ERECTION (OTHER THAN SPOOL) 24 NB 8 INCH - 14 INCH 25 NB 16 INCH - 24 INCH 26 NB 38 INCH - 48 INCH 27 STAINLESS STEEL PIPING (NON-IBR); THK. <= 10MM 28 FABRICATION (BUTT WELD- MANUAL) 29 NB UPTO 1.5 INCH 30 NB 2 INCH - 6 INCH 31 FABRICATION (FILLET WELD) 32 NB UPTO 1.5 INCH 33 ERECTION (OTHER THAN SPOOL) 34 NB UPTO 1.5 INCH 35 NB 2 INCH - 6 INCH 36 VALVES :- Transportation of all types of valves (Including special valves and motor operatedvalves) from Owners storage points to contractors stores/worksite and installation of valvesfor all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. Note : For PRDS, PSVs, TSVs, Control valves, On-Off/Shutdown valvesandSelf actuating valves all details and rates shall be as per Instrumentation SOR. 37 FLANGED/WAFER VALVES INCLUDING MOV (UPTO 600#) 38 NB2.000 INCHES 39 NB3.000 INCHES 40 NB4.000 INCHES 41 NB6.000 INCHES 42 NB8.000 INCHES 43 NB 10.000 INCHES 44 NB 12.000 INCHES 45 NB 20.000 INCHES 46 NB 24.000 INCHES 47 NB 42.000 INCHES 48 SPRING SUPPORT ASSEMBLIES :- Transportation of all types of spring support assemblies from Owners storage points to contractors stores/worksite and installation of spring support assemblies for all rating including assembly, if any, fixing of gaskets bolts/nuts, welding attachments wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. Contractor to ensure that travel stops are removed and spring is locked in cold load position for Hydrotest. It shall be ensured that locking devices are removed and springs are properly set at hot load position during commissioning. 49 SOR Sl. No.: 49 || PART NO: 0 || SOR NO: B861-000-16-43-PK-SOR-3001-0-0M ||ITEM NO: M21901000000 50 BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types of piping as called for in EIL Specification No.6-76-0002 on already erected system including supply of all materials, recording devices, instruments etc; Providing all normal and special equipment and gadgets, skilled / un skilled labour, specialist, supervisory staff and completing the work in all respects as per specifications and instructions of engineer-in-charge. some joints may require bolt tensioning more than once, but, payment for one joint shall be made only once. 51 150# JOINTS 52 NB 12.000 INCHES 53 NB 16.000 INCHES 54 NB 18.000 INCHES 55 NB 20.000 INCHES 56 NB 24.000 INCHES 57 NB 42.000 INCHES 58 300# JOINTS 59 NB 12.000 INCHES 60 NB 24.000 INCHES 61 REINFORCING PADS FOR PIPES :- Fabrication ofreinforcingpads for pipeconnection wherever required (from pipes only suppliedbytheOwner) and erection, fitup, weldingandtesting (including DP/MP) if required of the same and performing Positive Material Identification(PMI) using alloy analysers as per the specifications, drawings and instructions ofthe Engineer-in-Charge. Note: Sizes mentioned forReinforcing Pads are for branch pipe 62 C.S REINFORCING PADS 63 NB2.000 INCHES 64 NB3.000 INCHES 65 NB6.000INCHES 66 NB8.000 INCHES 67 NB 10.000INCHES 68 NB 12.000 INCHES 69 NB 18.000INCHES 70 NB 24.000 INCHES 71 NB 28.000 INCHES 72 RADIOGRAPHY :- Performance of radiographic inspection on piping of all typesandthicknesses including providing or hiring of all necessary equipment and whatever else even though not expressly mentioned but required to perform the work as per specificationsand instructions of Engineer-in-Charge. Radiographs shall be submitted to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on repaired joints due to Contractors fault and for additional radiography necessitated due to poor performance of contractors welders shall be done at contractors cost) Note: Unit for radiography quantity is Nos of circumferencial weld joints. 73 FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF JOB NDE SPECIFICATION) 74 NB0.750 INCHES 75 NB1.000 INCHES 76 NB1.500 INCHES 77 NB2.000 INCHES 78 NB3.000 INCHES 79 NB4.000 INCHES 80 NB6.000 INCHES 81 FOR JOINTS THK. <= 8MM (FOR CS AS PER CLASS lV OF JOB NDE SPECIFICATION/AS/SS) 82 NB2.000 INCHES 83 FOR JOINTS ABOVE THK. 8MM 84 NB8.000 INCHES 85 NB 12.000 INCHES 86 NB 18.000 INCHES 87 NB 24.000 INCHES 88 NB 42.000 INCHES 89 DYE PENETRATION/MAGNETIC PARTICLE TEST :- Performance of magnetic particle/ dye penetrant test including supply of all necessary materials, equipment and labour for carrying out the work as per specification and directions of Engineer-in-Charge. 90 DYE PENETRANT TEST 91 MAGNETIC PARTICLE TEST 92 PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY OWNER) :- Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method using die), turn buckles, saddles, guides,special supports, pads(including corrosion pads & protection shields), providing and welding of stiffeners as per drawings, T post etc. of all types including supply and application one coat of primer, all necessary equipments, consumables, labour,returning surplus materials and scrap etc to owners storage points and completing work as per drawings, specifications and instructions of Engineer-in-charge. Modifications/rectifications, if required; andadjustment/ alignment during precommisioning, commisioning as per the instructions ofEngineer-in-charge. Fabrication of extension of spindle for valves, provision of locking arrangement, etc. shall also be considered under this item. 93 DUMMY PIPE SUPPORTS FOR C.S (OWNER SUPPLIED) 94 DUMMY PIPE SUPPORTS FOR S.S (OWNER SUPPLIED) 95 PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY CONTRACTOR) :- Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method using die), turn buckles, saddles, guides,special supports, pads(including corrosion pads & protection shields), providing and welding of stiffeners as per drawings, T post etc. of all types including supply and application one coat of primer, all necessary equipments, consumables, labour, and completing work as per drawings, specifications and instructions of Engineer-in-charge. Modifications/rectifications, if required; andadjustment/ alignment during precommisioning, commisioning as per the instructions ofEngineer-in-charge. Fabrication of extension of spindle for valves, provision of locking arrangement, etc. shall also be considered under this item. 96 C.S STRUCTURAL STEEL (CONTRACTOR SUPPLIED) 97 S.S STRUCTURAL STEEL (CONTRACTOR SUPPLIED) 98 DUMMY PIPE SUPPORTS FOR C.S (CONTRACTOR SUPPLIED) 99 DUMMY PIPE SUPPORTS FOR S.S (CONTRACTOR SUPPLIED) 100 WOODEN/HIGH DENSITY PUF SUPPORTS FOR COLD LINES :- Supply, shaping, positioning and fixing of cold line supports as per EIL pipe support standard having the following specifications: Wood specification:Hard wood, chemically treated with creosote under pressure. Quality of wood to conform class-I durability as per IS-3629 & Grade-I timber of Group-A withpermissible compression strength of 70 Kg/cm2 perpendicular to grains as per IS-883. PUF specifications: Density for lines upto 6 NB : 240 kg/cm3 Density for lines above 6 NB : 320 kg/cm3 101 WOODEN BLOCKS 102 HIGH DENSITY (240 Kg/Cu.M) PUF BLOCKS 103 HIGH DENSITY (320 Kg/Cu.M) PUF BLOCKS 104 CHEMICAL CLEANING/PICKLING :- Cleaning and pickling of equipment/pipeline includng preparation of circulation loop, supply of temporary piping, pumps, heater coils, gaskets, thermometer, hydrometer, valve, test coupon, spares, laboratoryfacilities, with all accessories for conducting test, chemicals, safety accessories and also providing or hiring all necessary equipment and whatever else even though not expressly mentionedhereinandinspecificaions but required to perform the work as per specifications and instructions ofEngineer-in-Charge. 105 PASSIVATION OF COOLING WATER LINES 106 NB0.500 INCHES 107 NB0.750 INCHES 108 NB1.000 INCHES 109 NB1.500 INCHES 110 NB2.000 INCHES 111 NB3.000 INCHES 112 NB4.000 INCHES 113 NB6.000 INCHES 114 NB8.000 INCHES 115 NB 10.000 INCHES 116 NB 12.000 INCHES 117 NB 14.000 INCHES 118 NB 16.000 INCHES 119 NB 18.000 INCHES 120 NB 20.000 INCHES 121 NB 24.000 INCHES 122 NB 42.000 INCHES 123 FABRICATION & ERECTION OF BLINDS/SPECTACLE BLINDS/SPACER & BLINDS ETC. :- Transportation from owners storage point to work site, fabrication and erection of blinds, spectacle blinds, spacers & blinds of all ratings from plate material of all thicknesses supplied by owner as free issue; cutting, edge preparation, rolling, fit up, welding, cleaning, testing (hydrotesting, MP/DP, radiography), wherever required bolts nuts & gaskets including supply of necessary equipment, consumables, labour etc as per standards / specifications and directions of Engineer-in-charge 124 BLINDS 125 NB0.750 INCHES 126 NB1.000 INCHES 127 NB1.500 INCHES 128 NB2.000 INCHES 129 NB3.000 INCHES 130 NB4.000 INCHES 131 NB6.000 INCHES 132 NB8.000 INCHES 133 NB 12.000 INCHES 134 NB 24.000 INCHES 135 NB 42.000 INCHES 136 SPECTACLE BLINDS 137 NB2.000 INCHES 138 NB3.000 INCHES 139 SPACERS & BLINDS 140 NB 24.000 INCHES 141 NB 42.000 INCHES 142 SUPPLY OF STUDS ALONG WITH NUTS: Supply as per Technical Notes for Fasteners (6-44-0057) from Vendor enlisted in Project Master Supplier List of Studs along with two nutsfor diameter < 1 and 3 nuts for diamemter >= 1of nuts, as per the direction of Engineer in-charge. All Alloy steel fasteners used in SS Piping shall be Hot Dip Galvanized. 143 AS FASTENERS(ASTM A193 GR.B7/B7M/A194 GR.2H/2HM) 144 MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of different sizes of CS/AS/SS/Higher Alloy piping of all types and thicknessess in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owners storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour and supervision including attending repairs for completing the work as per the instruction of Engineer-in-charge. 145 FLAME CUTTING C.S PIPINGIBR/NON IBR 146 HACKSAW CUTTING C.S PIPINGIBR/NON IBR 147 BEVELLINGC.S PIPINGIBR/NON IBR 148 FITUP & WELDINGC.S PIPINGIBR/NON IBR 149 FLAME CUTTINGS.S PIPINGIBR/NON IBR 150 HACKSAW CUTTINGS.S PIPINGIBR/NON IBR 151 BEVELLINGS.S PIPINGIBR/NON IBR 152 FITUP & WELDINGS.S PIPINGIBR/NON IBR 153 REMOVAL ERECTED PIPING(ABOVE GROUND) :- Removal of piping existing/ erected including SW valves for modification as required as per Drawings/P and IDs/instructions of Engineer-in-charge at all elevations, including providing assistance to owner for draining, cleaning and purging of the lines to be removed , unbolting of flanged joints /cutting of pipe lines wherever required, installation of flanges and blind flanges, removal of insulation from insulated lines, removing supports, steam tracers, all fittings and flanges, instruments etc, cutting of pipes in appropriate length for transporting purposes, cleaning, flushing, drying and transporting all materials to storage point(within the complex battery limits) designated by Owner/EIL including stacking of material and disposing of waste etc as instructed by Engineer-in-charge. 154 C.S/A.S PIPING 155 S.S PIPING 156 REMOVAL OF ERECTED VALVES (ABOVE GROUND) :- Removal of all types and ratings of valves by unbolting, cutting etc. as required, cleaning by flushing with water/air etc. asrequiredand transportation of the same to Owners storage point (within thecomplex battery limits) and stacking as per instructions of Engineer-in-Charge. 157 VALVES OTHER THAN CONTROL VALVES 158 NB0.500 INCHES 159 NB0.750 INCHES 160 NB1.000 INCHES 161 NB1.500 INCHES 162 NB2.000 INCHES 163 NB3.000 INCHES 164 NB4.000 INCHES 165 NB6.000 INCHES 166 NB8.000 INCHES 167 NB 10.000 INCHES 168 NB 12.000 INCHES 169 NB 24.000 INCHES 170 NB 42.000 INCHES 171 LOW FRICTION PADS: Supply, fabrication and fixing of low friction pads with suitable bonding materials / fasteners, as specified in Drawings / Isometrics / Special support sketches. 172 TEFLON PAD WITH COMPRESSIVE STRENGTH (0.25 OFFSET) :1870 PSI 173 GRAPHITE PAD WITH COMPRESSIVE STRENGTH : 2877 PSI 174 PRE-COMMISSIONING / COMMISSIONING ASSISTANCE : Carrying out Pre-commissioning / Commissioning activities such as dropping the valves, control valves and spool pieces, air and water flushing and air-blasting, steam blowing, air drying, re-installing the valves, control valves and spool pieces, leak testing etc. as per pre-commissioning / commissioning specification/ procedure and instruction of Engineer-in-charge including supply of necessary hand tools, equipments/ machinery, consumables (electrodes, filler wire, gas, card board, target plate, scaffolding etc. wherever required) and with single point responsibility of Contractors supervision.Note : This manpower will be utilized forPre-commissioning & Commissioning requirement over and above that already described elsewhere in this SOR.One Man day is 12 hour duty. 175 SKILLED (WITH HAND TOOLS, EQUIPMENT/MACHINERY, CONSUMABLES) 176 SEMI SKILLED (WITH HAND TOOLS) 177 HELPER/ UNSKILLED 178 PIPE DAVITS :Supply, fabrication & erection of pipe davits as per EIL std. 7-12-023 for lowering of aircooler motors/safety valves from structural platforms, fixing the same to platforms, inspection as per specs., supply of all necessary materials, equipment, consumables, labour,supervision etc. The work shall be carried out as per the specifications, drawings & instruction of engineerincharge. 179 SOR Sl. No.: 179 || PART NO: 0 || SOR NO: B861-000-16-43-PK-SOR-3001-0-0M ||ITEM NO: M25201000000 180 SUPPLY OF BULK PIPING ITEMS :- Procurement andsupply of following bulk piping items to site/ownersstorage, transportation to work site/fabrication shop.Procurement shall be done as per EIL specifications andfrom Client/EIL approved suppliers.Contractor shall establish quantities from drawingsconsidering wastage, cutting allowance, escalation &spares required by Client 181 PIPES 182 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 0.5 INCH, S160 183 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 0.75 INCH, S160 184 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 1.0 INCH, XS 185 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 1.5 INCH, XS 186 PIPE, B-36.19, ASTM A 312 TP304, PE, SEAMLESS, 0.5 INCH, 80S 187 PIPE, B-36.19, ASTM A 312 TP304, PE, SEAMLESS, 0.75 INCH, 80S 188 PIPE, B-36.19, ASTM A 312 TP304L, PE, SEAMLESS, 0.75 INCH, 80S 189 FLANGES 190 FLNG.SW, B-16.5, ASTM A 105, 300, RF/125AARH, 1.0 INCH, XS 191 FLNG.SW, B-16.5, ASTM A 105, 300, RF/125AARH, 1.5 INCH, XS 192 FLNG.WN, B-16.5, ASTM A 105, 150, RF/125AARH, 0.75 INCH, S160 193 FLNG.WN, B-16.5, ASTM A 105, 150, RF/125AARH, 1.0 INCH, XS 194 FLNG.WN, B-16.5, ASTM A 105, 150, RF/125AARH, 1.5 INCH, XS 195 FLNG.WN, B-16.5, ASTM A 182 GR.F304, 150, RF/125AARH, 0.75 INCH, 80S 196 FLNG.BLIND, B-16.5, ASTM A 105, 150, RF/125AARH, 0.75 INCH 197 FLNG.BLIND, B-16.5, ASTM A 105, 150, RF/125AARH, 1.0 INCH 198 FLNG.BLIND, B-16.5, ASTM A 105, 150, RF/125AARH, 1.5 INCH 199 FLNG.BLIND, B-16.5, ASTM A 105, 300, RF/125AARH, 1.0 INCH 200 FLNG.BLIND, B-16.5, ASTM A 182 GR.F304, 150, RF/125AARH, 0.75 INCH 201 FITTINGS 202 ELBOW.90, B-16.11, ASTM A 105, SW, 3000, 1.0 INCH 203 ELBOW.90, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 204 ELBOW.90, B-16.11, ASTM A 105, SW, 6000, 0.75 INCH 205 ELBOW.90, B-16.11, ASTM A 182 GR.F304L, SW, 3000, 0.75 INCH 206 T.EQUAL, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 207 T.EQUAL, B-16.11, ASTM A 182 GR.F304L, SW, 3000, 0.75 INCH 208 T.RED, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH, 0.75 INCH 209 SWAGE.CONC, BS-3799, ASTM A 105, PBE, 0.75 INCH, S160, 0.5 INCH, S160 210 CPLNG.FULL, B-16.11, ASTM A 105, SW, 3000, 1.0 INCH 211 CPLNG.FULL, B-16.11, ASTM A 182 GR.F304L, SW, 3000, 0.75 INCH 212 CPLNG.HALF, B-16.11, ASTM A 105, SW, 3000, 1.0 INCH 213 CPLNG.HALF, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 214 CPLNG.HALF, B-16.11, ASTM A 105, SW, 6000, 0.75 INCH 215 CPLNG.HALF, B-16.11, ASTM A 182 GR.F304, SW, 3000, 0.75 INCH 216 CPLNG.LH, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 217 VALVES 218 VLV.GATE, SHEET 51001, 0.5 INCH 219 VLV.GATE, SHEET 51001, 0.75 INCH 220 VLV.GATE, SHEET 51001, 1.0 INCH, LOCK OPEN 221 VLV.GATE, SHEET 51001, 1.0 INCH 222 VLV.GATE, SHEET 51001, 1.5 INCH, LOCK OPEN 223 VLV.GATE, SHEET 51001, 1.5 INCH 224 VLV.GATE, SHEET 51007, 0.75 INCH 225 VLV.GATE, SHEET 51045, 0.5 INCH 226 VLV.GATE, SHEET 51045, 0.75 INCH 227 VLV.GLOBE, SHEET 52001, 1.0 INCH 228 VLV.GLOBE, SHEET 52007, 1.0 INCH 229 VLV.CHECK, SHEET 53001, 1.0 INCH 230 VLV.CHECK, SHEET 53007, 1.0 INCH 231 VLV.CHECK, SHEET 53050, 0.75 INCH 232 GASKETS 233 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 150, 0.75 INCH 234 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 150, 1.0 INCH 235 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 150, 1.5 INCH 236 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 300, 1.0 INCH 237 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 300, 1.5 INCH 238 FASTENERS 239 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.5 INCH X 2.5 INCH 240 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.5 INCH X 2.75 INCH 241 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.0 INCH 242 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.25 INCH 243 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.5 INCH 244 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.75 INCH 245 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 4.0 INCH 246 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.75 INCH X 3.5 INCH 247 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.75 INCH X 4.0 INCH 248 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.75 INCH X 4.25 INCH 249 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7(HDG), A194 GR.2H(HDG), 0.5 INCH X 2.5 INCH 250 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7(HDG), A194 GR.2H(HDG), 0.625 INCH X 3.25 INCH 251 CLOSE PROXIMITY RADIOGRAPHY:-Performance of radiographic inspection on piping of all types & thicknesses includingproviding or hiring of all necessary equipment and whatever else even though notexpressly mentioned but required to perform the work as per specification andinstructions of Engineer-in-Charge by using SELENIUM& IRIDIUM source basedradiography system. Radiography shall be submitted tothe Engineer-in-charge.(Repeat Radiography due todefective radiograph on reparired joints due toContractors fault and for additional radiographynecessitated due to poor performance of contractorswelders shall be done at contractors cost).Note: Unit for radiography quantity is Nos ofcircumferencial weld joints, and rates are also inclusive of scaffoldings wherverrequired. 252 FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF JOB NDE SPECIFICATION) 253 NB0.750 INCHES 254 NB1.000 INCHES 255 NB1.500 INCHES 256 NB2.000 INCHES 257 NB3.000 INCHES 258 NB4.000 INCHES 259 NB6.000 INCHES 260 FOR JOINTS THK. <= 8MM (FOR CS AS PER CLASS lV OF JOB NDE SPECIFICATION/AS/SS) 261 NB2.000 INCHES 262 FOR JOINTS ABOVE THK. 8MM 263 NB8.000 INCHES 264 NB 12.000 INCHES 265 NB 18.000 INCHES 266 NB 24.000 INCHES 267 Supply,fabrication and fixing of low friction pad (SS 304 mirror finish) with suitablebonding material/ fasteners as specified in drawing/documents/special supportsketches/isometrics/Gads etc. 268 STAINLESS STEEL 6 MM THK WITH MIRROR FINISH SS304 269 External Chemical Cleaning and Passivation of SSWelds:External chemical cleaning and pickling of SS welds as per latest approved pipingdrawings and as per Job Specification B861-000-06-42-CCS-011. Work shall includesupply of all chemicals, temporary facilities with all accessories for conducting test,safety accessories and also providing or hiring all necessary equipment and whateverelse even though not expressly mentioned herein and in specifications but required toperform the work as per specifications and instructions of Engineer-in-Charge.(Unit ofmeasurement- No. of Joints) 270 NB0.500 INCHES 271 NB0.750 INCHES 272 NB1.000 INCHES 273 NB1.500 INCHES 274 NB2.000 INCHES 275 PAINTING (OFFSITES) :- Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects as per EIL painting spec., drawings and direction of Engineer-in-Charge for all types of uninsulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate, F9) shall be done in fabrication yard prior to erection. For insulated piping wherever blast cleaning with no primer application is specified, in such cases finish paints shall also be applied inthe fabrication yard.The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabricationas well as erection joints) shall be left unpainted till hydrotesting. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines. 276 SURFACE PREP, PRIMER & FINISH COAT FOR CS, AS & LTCS BARE SURFACES FORENVIRONMENT AS PER JOB SPEC B861-000-06-42-PLS-01 277 DESIGN TEMP GROUP: -16 TO 80(DEG C)SURFACE PREPARATION:SSPC-SP-10;1coat of F-9 @ 65-75µ DFT/coat, PRIMER: 1 coat of P-6 @ 40µ DFT/coat, FINISH COAT: 2 coats of F-6B @ 100µ DFT/coat + 1 coat of F-2 @ 40µ DFT/coat (2x100 + 40= 240). Total DFT = 345-355. 278 PIPES 279 NB: .5Inches 280 NB: .75 Inches 281 NB: 1 Inches 282 NB: 1.5 Inches 283 NB: 2 Inches 284 NB: 3 Inches 285 NB: 4 Inches 286 NB: 6 Inches 287 NB: 8 Inches 288 NB: 12Inches 289 VALVES 290 NB: .5Inches 291 NB: .75 Inches 292 NB: 1 Inches 293 NB: 1.5 Inches 294 NB: 2 Inches 295 NB: 3 Inches 296 NB: 4 Inches 297 NB: 6 Inches 298 NB: 8 Inches 299 NB: 12Inches 300 SURFACE PREP, PRIMER &FINISH COAT FOR CS & LTCS INSULATED SURFACES FOR ALLENVIRONMENT AS PER JOB SPEC B861-000-06-42-PLS-01 301 DESIGN TEMP GROUP: -45 TO 125(DEG C)SURFACE PREPARATION: SSPC-SP-10;1 coat of F-15 @ 75µ DFT/coat, PRIMER: None, FINISH COAT: 2 coats of F-15 @ 75µ DFT/coat. Total DFT = 225 302 PIPES 303 NB: .5Inches 304 NB: .75 Inches 305 NB: 1 Inches 306 NB: 1.5 Inches 307 NB: 2 Inches 308 NB: 3 Inches 309 NB: 4 Inches 310 NB: 6 Inches 311 NB: 8 Inches 312 NB: 12Inches 313 NB: 18Inches 314 NB: 24Inches 315 NB: 28Inches 316 NB: 36Inches 317 NB: 42Inches 318 VALVES 319 NB: .5Inches 320 NB: .75 Inches 321 NB: 1 Inches 322 NB: 1.5 Inches 323 NB: 2 Inches 324 NB: 3 Inches 325 NB: 4 Inches 326 NB: 6 Inches 327 NB: 8 Inches 328 NB: 12Inches 329 NB: 18Inches 330 NB: 24Inches 331 NB: 42Inches 332 SURFACE PREP, PRIMER & FINISH COAT FOR CS, AS & LTCS BARE SURFACES FOR ENVIRONMENT AS PER JOB SPEC B861-000-06-42-PLS-01 333 DESIGN TEMP GROUP: -45 TO -15(DEG C)SURFACE PREPARATION:SSPC-SP-10; 1 coat of F-9 @ 65-75µ DFT/ coat. Total DFT = 65-75. 334 PIPES 335 NB0.50 INCHES 336 NB0.750 INCHES 337 NB1.000 INCHES 338 NB1.500 INCHES 339 NB2.000 INCHES 340 NB3.000 INCHES 341 NB4.000 INCHES 342 NB6.000 INCHES 343 NB12.000 INCHES 344 VALVES 345 NB0.50 INCHES 346 NB0.750 INCHES 347 NB1.000 INCHES 348 NB1.500 INCHES 349 NB2.000 INCHES 350 NB3.000 INCHES 351 NB4.000 INCHES 352 NB6.000 INCHES 353 NB12.000 INCHES 354 *************************************************************** LEGENDS / NOTES FOR INSULATION WORKS***************************************************************** Types of Insulation :CC =Cold Conservation Insulation SC =Surface Condensation InsulationH = Heat Conservation InsulationCPP =Cold Personal protectionHPP = Hot Personnel Protection Insulation** Basic Line Surface Materials:CS = Carbon Steel (Including LT Carbon Steel)AS = Alloy SteelSS = Stainless Steel ** Notes : 1. For Insulation specification, refer Job specification for Insulation of Piping and Equipment, B861-000-06-43-IL-S001*************************************************************** 355 COLD INSULATION (OFFSITES) Providing thermal insulation including supply of all insulating andancillary materials, Aluminium foil for SS surfaces, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required , including transportation of materials to work site, duly inspected by 3rd party inspector(Llyods/BV/DNV or any other Client approved party) at manufacturers shop & sample check/inspection at site by EIL Construction inspector,applying insulation on surfaces as specified including all preparatory works there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with cladding as per spec., providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. Providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions ofEngineer-in-charge. (Refer Legend for applicable EIL specification) 356 INSULATION MATERIAL : PREFORMED POLYISOCYANURATE RIGID FOAM(PIR) 357 INSULATION TYPE : CC; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C); INSULATION MATERIAL : PREFORMED POLYISOCYANURATE RIGID FOAM(PIR) 358 PIPES 359 NB 00.75 INCHES; THICKNESS25 MM 360 NB 01.00INCHES; THICKNESS25 MM 361 NB 01.50 INCHES; THICKNESS50 MM 362 NB 02.00 INCHES; THICKNESS50 MM 363 NB 06.00INCHES; THICKNESS50 MM 364 NB 08.00INCHES; THICKNESS50 MM 365 NB 012.000INCHES; THICKNESS60 MM 366 NB 018.000INCHES; THICKNESS60 MM 367 NB 24.00 INCHES; THICKNESS60 MM 368 NB 28.00 INCHES; THICKNESS60 MM 369 NB 42.00 INCHES; THICKNESS60 MM 370 FLANGE ASSEMBLIES 371 NB 00.75INCHES; THICKNESS25 MM 372 NB 01.00INCHES; THICKNESS25 MM 373 NB 01.50 INCHES; THICKNESS50 MM 374 NB 02.00INCHES; THICKNESS50 MM 375 NB 06.00INCHES; THICKNESS50 MM 376 NB 08.00INCHES; THICKNESS50 MM 377 NB 012.000INCHES; THICKNESS60 MM 378 NB 018.000INCHES; THICKNESS60 MM 379 NB 24.00 INCHES; THICKNESS60 MM 380 NB 42.00 INCHES; THICKNESS60 MM 381 BLIND FLANGE ASSEMBLIES 382 NB 00.75 INCHES; THICKNESS25 MM 383 NB 08.00 INCHES; THICKNESS50 MM 384 VALVE ASSEMBLIES 385 NB 00.75 INCHES; THICKNESS25 MM 386 NB 01.00INCHES; THICKNESS25 MM 387 NB 01.50INCHES; THICKNESS50 MM 388 NB 02.00 INCHES; THICKNESS50 MM 389 NB 06.00INCHES; THICKNESS50 MM 390 NB 08.00 INCHES; THICKNESS50 MM 391 NB 012.000INCHES; THICKNESS60 MM 392 NB 018.000INCHES; THICKNESS60 MM 393 NB 24.00 INCHES; THICKNESS60 MM 394 NB 42.00 INCHES; THICKNESS60 MM 395 INSULATION TYPE : SC; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C); INSULATION MATERIAL : PREFORMED POLYISOCYANURATE RIGID FOAM(PIR) 396 PIPES 397 NB 00.50 INCHES; THICKNESS25 MM 398 NB 00.75 INCHES; THICKNESS25 MM 399 NB 01.00 INCHES; THICKNESS25 MM 400 NB 01.50 INCHES; THICKNESS25 MM 401 NB 02.00 INCHES; THICKNESS25 MM 402 NB 03.00 INCHES; THICKNESS25 MM 403 NB 04.00 INCHES; THICKNESS40 MM 404 NB 06.00 INCHES; THICKNESS25 MM 405 NB 06.00 INCHES; THICKNESS40 MM 406 NB 08.00 INCHES; THICKNESS25 MM 407 NB 08.00 INCHES; THICKNESS40 MM 408 NB 12.00 INCHES; THICKNESS40 MM 409 NB 18.00 INCHES; THICKNESS40 MM 410 NB 24.00 INCHES; THICKNESS40 MM 411 NB 24.00 INCHES; THICKNESS50 MM 412 NB 28.00 INCHES; THICKNESS50 MM 413 NB 42.00 INCHES; THICKNESS50 MM 414 FLANGE ASSEMBLIES 415 NB 00.50INCHES; THICKNESS25 MM 416 NB 00.75INCHES; THICKNESS25 MM 417 NB 01.00INCHES; THICKNESS25 MM 418 NB 01.50 INCHES; THICKNESS25 MM 419 NB 02.00 INCHES; THICKNESS25 MM 420 NB 03.00INCHES; THICKNESS25 MM 421 NB 04.00INCHES; THICKNESS40 MM 422 NB 06.00 INCHES; THICKNESS25 MM 423 NB 06.00 INCHES; THICKNESS40 MM 424 NB 08.00INCHES; THICKNESS25 MM 425 NB 08.00INCHES; THICKNESS40 MM 426 NB 12.00 INCHES; THICKNESS40 MM 427 NB 018.000INCHES; THICKNESS40 MM 428 NB 24.00 INCHES; THICKNESS40 MM 429 NB 24.00 INCHES; THICKNESS50 MM 430 NB 42.00 INCHES; THICKNESS50 MM 431 BLIND FLANGE ASSEMBLIES 432 NB 00.75 INCHES; THICKNESS25 MM 433 NB 01.00 INCHES; THICKNESS25 MM 434 NB 01.50 INCHES; THICKNESS25 MM 435 NB 02.00 INCHES; THICKNESS25 MM 436 NB 08.00 INCHES; THICKNESS40 MM 437 NB 24.00 INCHES; THICKNESS50 MM 438 VALVE ASSEMBLIES 439 NB 00.50 INCHES; THICKNESS25 MM 440 NB 00.75 INCHES; THICKNESS25 MM 441 NB 01.00 INCHES; THICKNESS25 MM 442 NB 01.50 INCHES; THICKNESS25 MM 443 NB 02.00 INCHES; THICKNESS25 MM 444 NB 03.00 INCHES; THICKNESS25 MM 445 NB 04.00 INCHES; THICKNESS40 MM 446 NB 06.00INCHES; THICKNESS25 MM 447 NB 06.00INCHES; THICKNESS40 MM 448 NB 08.00 INCHES; THICKNESS25 MM 449 NB 08.00 INCHES; THICKNESS40 MM 450 NB 12.00 INCHES; THICKNESS40 MM 451 NB 018.000INCHES; THICKNESS40 MM 452 NB 24.00 INCHES; THICKNESS40 MM 453 NB 24.00 INCHES; THICKNESS50 MM 454 NB 42.00 INCHES; THICKNESS50 MM 455 ELECTRICAL WORKS 456 Design, detailed engineering, preparation of documents, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, preparation of graphics for the total microprocessor based analogue addressable type fire detection & alarm system including supply of required software, packing, delivery of the following, including supply of all commissioning spares & special tools and tackles, erection material & documentation as per the enclosed EIL standard specifications, scope of work/job specification, data sheets etc. and other codes and standards attached or referred. 457 8-loop microprocessor based DGFAP with HMI with battery &charger (refer block diagram) 458 Microprocessor based Repeater panel with battery and charger (refer block diagram) 459 Multi - sensor type addressable detectors with junction boxes for safe area 460 Intrinsically safeHeat Detector-addressable type 461 Addressable Linear Beam detectors with transmitter, receiver, reflector for safe area. 462 Zener barrier 463 Outdoor weather proof addressable Break Glass Unit (BGU)/Manual call point (IP-65)in safe area. 464 Indoor addressable Break Glass Unit (BGU) in safe area. 465 Addressable type electronic hooter with minimum 6W output 466 Wall mounting type one faced exit signs suitable for indoor location 467 Ceiling mounting type double faced exit signs suitable for indoor location 468 Weather proof (IP-65) Fault Isolating Modules for loops connecting outdoor break glass units 469 Fault Isolating Modules for loops connecting indoor break glass units/detectors/hooters etc. 470 Control modules with integral junction box installed within loop 471 Input Module with integral junction box installed within loop 472 Industrial type 5 km diametrical range siren with Siren control & starter panel 473 Response indicator for rooms and concealed area for Addressable Fire alarm system 474 Hooter acknowledge Box 475 Providing training for TWO Nos. OWNERs Engineers for a period of 4 days at manufacturer works for Fire Alarm system 476 Providing training for FIVE Nos. OWNERs Engineers at site for the complete fire alarm system 477 Mandatory spares for Fire Alarm system as perCl.6.1 (Mandatory spares), sr.no.15 of EDB document no. B861-000-16-50-EDB-1001 478 Supply, inspection at shop, delivery at site of safe area weatherproof/ indoor push button type desktop/ wallmounting type Analogue caller ID telephone handsets (corded landline phones) with numeric key pad and redialling facility complete with all accessories including all labour and materail. as per approved drawings, specifications of this tender and directions of Engineer-in-ChargeExisting exchange distribution boxes make is ADC Krone, UK 479 Supply, inspection at shop, delivery at site of safe area weatherproof/ indoor push button type desktop/ wall mounting type Analogue non caller ID telephone handsets complete with all accessories including all labour and materail. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.Existing exchange distribution boxes make is ADC Krone, UK 480 Installation, testing and commissioning of safe area weatherproof/ indoor push button type desktop/ wall mounting type telephone handsets complete with all accessories including all labour and materail. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 481 Design, detailed engineering, manufacture, preparation of documents, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, supply & delivery of plant communication system supply of all commissioning spares and special tools & tackles, erection & installation material & documentation as per the enclosed EIL specifications, Job specifications/scope of work, datasheets etc and other codes & standards attached or referred. 482 Desktop type Master Call Station (Central Control Unit withMain Master Control Controller with Gooseneck MIC and All Call & Inter-MCD Call facility) with 24 keys suitable for connection with existing 16 Way Microprocessor based Central Control Exchange of DD Electronic Equipment’s PVT Ltd make.Make & model no. of Desktop type Master call station shall be same/ similar make as that of existing.Existing make is DD Electronic Equipment’s PVT Ltd with Model No: LDD8950/20 483 480W BOOSTER AMPLIFIER UNIT including all accessories such as zonal relay cards, IOs, interconnection cables etc. suitable for integration with existing exchange of make DD equipments. Make & Model no. of Booster amplifier unit shall be same/similar make as that of existing.Existing make is BOSCH with Model No: LBD 1938 484 Weather proof IP-65 loud speaker 15/20 Watt suitable for integration with existing exchange of make DD equipments. Make & Model no. of Booster amplifier unit shall be same/similar make as that of existing. Existing make & model no. is Make – DNH ; Model - HS15T 485 Supply, installation and connection of CU earth plates ( 380x45x10) size, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge. 486 Unit Rates for UPS ACDB feeders/components 487 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU upto 32 A with Isolation Transformer 488 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 63 A with Isolation Transformer 489 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 100 A with Isolation Transformer 490 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU upto 32 A without Isolation Transformer 491 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 63 A without Isolation Transformer 492 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 100 A without Isolation Transformer 493 supply& connection of 300A, 230V ACDB Vertical Empty Panel along with bus bar 494 Supply, mounting & wiring of Fully equipped outgoing feeder (230V SFU 16 A with 230/240V step up transformer) 495 Supply, mounting & wiring of Fully equipped outgoing feeder (230V SFU 32 A with 230/240V step up transformer) 496 Supply, mounting & wiring of Fully equipped outgoing feeder (230V SFU 63 A with 230/240V step up transformer) 497 Supply, mounting & wiring of 100A switch 498 Supply, mounting & wiring of 63A switch 499 Supply, mounting & wiring of 32A switch 500 Supply, mounting & wiring of 100A semiconducting fuse 501 Supply, mounting & wiring of 63A semiconducting fuse 502 Supply, mounting & wiring of 32A semiconducting fuse 503 Supply, mounting & wiring of 100A HRC fuse 504 Supply, mounting & wiring of 63A HRC fuse 505 Supply, mounting & wiring of 32A HRC fuse 506 Supply, mounting & wiring of 6 kVA 230V/230V Isolating Transformer 507 Supply, mounting & wiring of 5 kVA 230V/230V Isolating Transformer 508 Supply, mounting & wiring of 4 kVA 230V/230V Isolating Transformer 509 Supply, mounting & wiring of 3 kVA 230V/230V Isolating Transformer 510 Supply, mounting & wiring of 2 kVA 230V/230V Isolating Transformer 511 Supply, mounting & wiring of 1 kVA 230V/230V Isolating Transformer 512 Unit rates for 110V DCDB feeders/components 513 supply& connection of 350A, 110V DCDB Vertical Empty Panel along with bus bar 514 Supply, mounting & wiring of 63A, 110V DC SFU fully equipped outgoing feeder 515 Supply, mounting & wiring of 32A, 110V DC SFU fully equipped outgoing feeder 516 Supply, mounting & wiring of 16A, 110V DC SFU fully equipped outgoing feeder 517 Supply, mounting & wiring of 32A, 110V DC SFC (switch fuse+ contactor) fully equipped outgoing feeder 518 Supply, mounting & wiring of 16A, 110V DC SFC (switch fuse+ contactor) fully equipped outgoing feeder 519 Supply, mounting & wiring of 100A, 110V DC Switch 520 Supply, mounting & wiring of 63A, 110V DC Switch 521 Supply, mounting & wiring of 32A, 110V DC Switch 522 Supply, mounting & wiring of 16A, 110V DC Switch 523 Supply, mounting & wiring of 100A, 110V DC fuse Link 524 Supply, mounting & wiring of 63A, 110V DC fuse Link 525 Supply, mounting & wiring of 32A, 110V DC fuse Link 526 Supply, mounting & wiring of 16A, 110V DC fuse Link 527 Supply, mounting & wiring of 100A, 110V DC contactor 528 Supply, mounting & wiring of 63A, 110V DC contactor 529 Supply, mounting & wiring of 32A, 110V DC contactor 530 Supply, mounting & wiring of 16A, 110V DC contactor 531 TRANSFORMERS 532 Installation of transformers of the following ratings excluding the construction of foundation, includingtransportation from store/yard to site at the place of installation, unpacking, positioning in place, site assembly of loosely furnished accessories, including connection of auxiliary circuits, topping up with oil and testing of oil with contractors own test equipment, including fixing of nuts and bolts etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 533 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV2.5 MV·A 534 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV1.6 MV·A 535 2 Winding ONAN/ONAF outdoor transformer with OLTC. 11 kV/ 6.9 kV6.3 MV·A 536 Filtration of transformer oil by stream line filter machine provided by the contractor for improving the insulation strength of oil to the required strength,including all labour and materials,specifications of this tender and directions of Engineer-in-Charge.(Excluding the supply of oil). 537 Filtration of transformer oil with dissolved gas analysis test. 538 Filtration of transformer oil without dissolved gas analysis test. 539 Supply of transformer oil conforming to IS-335 in non-returnable 220 litre drums for topping up various transformers. The oil shall be tested prior to filling up and improved by filtering, if required, including all labour and materials,specifications of this tender and directions of Engineer-in-Charge. 540 No. of Drums. 541 Supply of dry type transformers with accessories,including nuts and bolts etc., as per EIL standard specification No. 6-51-0042, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 542 2 Winding Dry type transformers. .415 kV/ .415 kV75 kV·A 543 2 Winding Dry type transformers. .415 kV/ .415 kV160 kV·A 544 Installation, testing and commissioning of dry transformer of following rating, including transportation from store/yard to site at the place of installation, unpacking, positioning in place, site assembly of loosely furnished accessories, connection of auxiliary circuits,including fixing of nuts and bolts etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 545 2 Winding Dry type transformers. .415 kV/ .415 kV75 kV·A 546 2 Winding Dry type transformers. .415 kV/ .415 kV160 kV·A 547 Testing and commissioning of transformers of the following rating including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge. 548 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV2.5 MV·A 549 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV1.6 MV·A 550 2 Winding ONAN/ONAF outdoor transformer with OLTC. 11 kV/ 6.9 kV6.3 MV·A 551 SWITCHBOARDS / UPS / VSD / BATTERY CHARGERS / PANELS 552 Installation, testing and commissioning of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc. electrical panels etc., including transportation from store/yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 553 Weight of the Unit upto 100 kg. 554 Weight of the Unit from 101 upto 500 kg. 555 Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc. electrical panels etc., including transportation from store/yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor etc., interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineers-in-Charge. 556 Weight of the Unit upto 100 kg. 557 Weight of the Unit from 101 upto 500 kg. 558 Installation, testing and commissioning of bus ducts of following ratings between transformer secondary and the switchgear incomer panel, including transportation from store/yard to site at the place of installation, unpacking, making connections and installation of bends, breaking of walls and making good of the same etc., (but excluding structural supports), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 559 Air Insulated/segregated bus ducts 415 V4000 A65 kAfor 1 second 560 Air Insulated/segregated bus ducts 415 V2500 A65 kAfor 1 second 561 Installation, testing and commissioning of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc .electrical panels etc., including transportation from store/yard to site at the place of installation, lifting the panels by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 562 Weight of the Unit upto 100 kg 563 Weight of the Unit from 101 upto 500 kg. 564 Weight of the Unit from 501 upto 1000 kg. 565 Weight of the Unit from 1001 upto 1500 kg. 566 Weight of the Unit from 1501 upto 3000 kg. 567 Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc .electrical panels etc., including transportation from store/yard to site at the place of installation, lifting the panels by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 568 Weight of the Unit upto 100 kg 569 Weight of the Unit from 101 upto 500 kg. 570 Weight of the Unit from 501 upto 1000 kg. 571 Weight of the Unit from 1001 upto 1500 kg. 572 Weight of the Unit from 1501 upto 3000 kg. 573 Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, delivery to site including all labour and materials along with supply of special tools & tackles for following Single Phase, 50 Hz UPS System along with associated accessories and AC Distribution Board complete with documentations as per approved drawings, specifications, data sheets and other codes & standards attached or referred with this tender and directions of Engineer-in-charge. 574 55KVA, 230V, 50 Hz, SPNParallel Redundant UPS withBypass as data sheet DS-440 575 1X100% NI-CD Battery Bank for 30 Min. backup along with all accessories & battery Isolator. 576 230V, 300 Amps, 50 Hz, AC Distribution Board as per Feeder Details listed in scope of work/job specification 577 Cell booster of adequate rating suitable for battery AH capacity. 578 Providing training to 2 nos. owners engineer at Vendor Works for a period of min. 3 days for 55KVA UPS system 579 Providing training to 5 nos. owners engineers at site for 55KVA UPS system 580 Mandatory spares for 230V, 55KVA UPS system as perCl.6.1 (Mandatory spares), sr.no.10 of EDB document no. B861-000-16-50-EDB-1001 581 MISCELLANEOUS CONTROL GEAR 582 Installation, testing and commissioning of miscellaneous surface mounted industrial/FLP control gear such as lighting/power panel, push button stations, motor starter, communication equipment, junction boxes, panels, plugs, sockets, including supply of necessary hardware, touch up painting including supply of paint, including transportation from store/yard to site at the place of installation, unpacking, (excluding fixing of cable glands and cable terminations),including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 583 Weight of the unit above 5 kg. but upto 20 kg. 584 Weight of the unit above 20 kg. but upto 100 kg. 585 Weight of the unit up to 5 kg. 586 Supply of Industrial, weather proof type Push Button stations as per EIL specification No. 6-51-0014, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 587 With stop (latching type) push button. 588 With stop (non-latching type) push button. 589 With start and stop (latching type) push buttons. 590 With start, stop push buttons and ammeter. 591 With start,stop push buttons and one Three position selector switch. 592 With start,stop push buttons, one Three position selector switch and ammeter. 593 With stop push button (Break Glass Type). 594 With start and stop (non-latching type) push buttons. 595 Supply of flameproof and weather proof type Push Button station as per EIL standard specification No. 6-51-0006 as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 596 With start, stop push buttons and one Three position selector switch and ammeter. 597 DC SYSTEM / BATTERY BANK 598 Supply of following ratings of Nickel-cadmium batteries, battery charger, distribution board alongwith accessories as per EIL specification No. 6-51-0019, 6-51-0047, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 599 160A (Min.) , dual redundant battery charger as per data sheet DS-430 600 110V, 1x500AH(Min.), Ni-Cd battery bank 601 110V, 350A DC distribution board as per feeder details listed in scope of work/job specification 602 3P MCCB / DC Circuit Breaker Battery isolator in weatherproof enclosure(IP-55)of adequate rating. 603 Mandatory spares for 110V Battery & Battery charger as per Cl.6.1 (Mandatory spares), sr.no.11 of EDB document no. B861-000-16-50-EDB-1001 604 Installation, testing and commissioning of stationary nickel-cadmium battery banks of the following ratings, including transportation from store/yard to site at the place of installation, filling with electrolyte, charging and dischargng of cells, including capacity test etc., aligning, levelling, grouting, assembly of battery racks, fixing of inter-cell connectors etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 605 Nickel-cadmium battery banks (including capacity test) rated for 110 V500 Ah 606 Supply of following rating of cell boosters as per EIL specification No. 6-51-0019, including all labour and materials, as per data sheets, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 607 Cell booster rated for 12 V50 A 608 PLUGS, SOCKETS AND JUNCTION BOXES 609 Supply of weatherproof metal clad 415V, TPN, industrial type socket and plug with heavy duty interlocking switch, with adequately sized cable adaptor box for incoming and outgoing cable terminations, including supply of double compression brass nickel plated cable glands, tinned copper lugs,including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 610 63 A, 415 V, 5 pin sockets along with associated 5 pin plugs. 611 240 V, 15 A, 3 pin sockets. 612 240 V, 15 A, 3 pin sockets along with associated 3 pin plugs. 613 24 V, 5 A, 3 pin sockets along with associated 3 pin plugs. WITH TRANSFORMER.(240/24V) 614 Supply, installation, cable termination, connection, testing and commissioning of following types of FLP andWP junction boxes, as per EIL specification No. 6-51-0061, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 615 WP JB (IP-65) with 15 A, 16 terminals suitable for 1 No. incoming and6 Nos. outgoing cable entries complete with cable glands for incoming and outgoing cables and 3 Nos. blocking plugs 616 WP 3 way JB (IP-65) complete with 3 Nos. cable glands and 1 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable. 617 WP 4 way JB with IP-65 degree of protection complete with 4 Nos. cable glands and 2 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable. 618 NEUTRAL GROUNDING RESISTOR 619 Supply of following rating of outdoor type neutral grounding resistor, as per EIL standard specification no.6-51-0043,including all labour and materials, as per approved drawings, specifications of this tnder and directions of Engineer-in-Charge. 620 NGR rated for 3.81 kV400 A 621 Installation, testing and commissioning of outdoor type following neutral grounding resistor consisting of cast iron/stainless steel grid resistor with/without neutral CT including connection of one end of resistor with transformer neutral and the other end of the resistor to the earthing grid, including transportation from store/yard to site at the place of installation, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 622 NGR rated for 3.81 kV400 A 623 CAPACITOR BANKS 624 Supply of following HV capacitor banks, series reactor and RVT, as per EIL standard specification NO. 6-51-0020, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 625 11kV, 3 Phase,indoor type APFC panel -1500kVAR 626 Mandatory spares for APFC as per Cl.6.1 (Mandatory spares), sr.no.20 of EDB document no. B861-000-16-50-EDB-1001 627 Installation of following H.V. capacitor banks,series reactor and RVT, including transportation from store/yard to site ofinstallation, unpacking, assembly of elevating structure, interconnection of loose parts supplied by equipment vendor, aligning, levelling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 628 HV capacitor banks rated for 1500 kVAR11 kV 629 Testing and commissioning of following H.V. capacitor banks,series reactor and RVT, including testing equipments, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 630 HV capacitor banks rated for 1500 kVAR11 kV 631 CANOPIES 632 Supply, fabrication and installation of FRP canopies for outdoor electrical miscellaneous equipments such as lighting/power panels and distribution junction boxes, local panels , PB stations etc. to render them weather proof including supply of necessary hardware for fixing and clamping with the equipment, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 633 Lighting Panel/Power panel/distribution junctions boxes. 634 Manual call points/field call stations. 635 Push button stations. 636 Supply, fabrication andinstallation of canopies for miscellaneous outdoor equipment like motors, fire alarm points, telephones, communication hand set stations etc. to render them weatherproof made out of 1.6 mm (16 gauge) sheet steel including supply of hardware and paint, painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 637 Supply, fabrication andinstallation of GI canopies for outdoor electrical motors of following frame sizes to render them weather proof including supply of necessary hardware for fixing and clamping with the motor foundation, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 638 Frame size upto 80. 639 Frame size more than 80 and upto 112. 640 Frame size more than 112 and upto 180. 641 Frame size more than 180 and upto 250. 642 Supply, fabrication and installation of GI canopies for outdoor electrical miscellaneous equipments such as lighting/power panels and distribution junction boxes, local panels , PB stations etc. to render them weather proof including supply of necessary hardware for fixing and clamping with the equipment, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 643 Lighting Panel/Power panel/distribution junctions boxes. 644 Manual call points/field call stations. 645 Push button stations. 646 FLP receptacles. 647 ANCHOR FASTENERS 648 Supply, drilling in RCC and fixing of metallic anchor fasteners for supporting of cable trays and miscellaneous electrical switchgear of following sizes, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 649 3/16 BSW. 650 5/16 BSW. 651 1/4 BSW. 652 3/8 BSW. 653 5/8 BSW. 654 1/2 BSW. 655 SAFETY EQUIPMENT 656 Supply and installation of the following, including the supply of necessary clamps, bolts, rawl plugs etc., breaking and making good of walls, if required, mounting, including all labour and materials, complete and as per applicable standards and CEA Guidelines and as per directions of Engineer-in-Charge. 657 Shock hazard charts complete with frame and glass. 658 First Aid Boxes. 659 4.5 kg capacity CO2 type fire extinguishers. 660 6.8 kg capacity CO2 type fire extinguishers. 661 9 kg capacity CO2 type fire extinguishers. 662 Sand buckets with stand (Each with at least 3 sand buckets). 663 Shock hazard charts - Laminated type 664 Gas Mask for use in substation during fire & smoke as per CEA guidelines 665 Supply and laying of 900 mm wide safety insulation mats complying to IS-15652, of following grades required for maintenance of electrical equipment in substation, including cutting to required shape in running length, including all labour and materials, as per applicable Indian or International standards and CEA Guidelines and as per directions of Engineer-in-Charge. 666 3.3 kV grade. 667 11 kV grade. 668 Supply of following items as per applicable Indian standards/CEA Guidelines. 669 Rubber hand gloves (11 kV grade). 670 Rubber hand gloves (33 kV grade). 671 Enamelled caution boards. 672 Discharge rod with earthing facility (upto 11 kV grade). 673 HV fuse puller handle. 674 Supply and application/installation of epoxy based insulation coating with breakdown voltage as per IS, suitable for system voltage as marked and shall be suitable for installation on concrete flooring of substation in airconditioned/non-airconditioned area, having smooth finish, including all labour and materials, complete as per approved drawings, job & standard specification attached with this tender and directions of the engineer-in- charge 675 For highest systen voltage of 12.1kV 676 SUPPLY OF SPARES / LAMPS 677 MV HRC Fuses 678 16 A. 679 32 A. 680 63 A. 681 100 A. 682 160 A. 683 250 A. 684 SUPPLY OF MV CABLES 685 Supply of 1100 V grade, Copper Conductor,XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 686 2 C x 10 sq. mm 687 2C x 16 sq. mm 688 2 C x 2.5 sq. mm 689 3 C x 6 sq. mm 690 2 C x 4 sq. mm 691 3 C x 4 sq. mm 692 3 C x 10 sq. mm 693 3 C x 2.5 sq. mm 694 Supply of 1100 V grade, Aluminium Conductor, XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 695 3 C x 25 sq. mm 696 3.5 C x 25 sq. mm 697 3 C x 35 sq. mm 698 2 C x 50 sq. mm 699 3 C x 95 sq. mm 700 3 C x 120 sq. mm 701 3.5 C x 185 sq. mm 702 3 C x 240 sq. mm 703 3 C x 50 sq. mm 704 3.5 C x 35 sq. mm 705 3.5 C x 95 sq. mm 706 3.5 C x 300 sq. mm 707 3.5 C x 50 sq. mm 708 3.5 C x 120 sq. mm 709 Supply of 1100 V grade, Copper Conductor, Individual pair shielded & Overall shielded, twisted pair/triad, XLPE insulated, Armored, FRLS outer-sheathed cables of following sizes as per EIL standard specification No. 6-51-0052, data sheets, specifications of this tender and directions of Engineer-in-Charge. 710 1 Pair x 2.5 sq. mm 711 2 Pair x 2.5 sq. mm 712 4 Pair x 2.5 sq. mm 713 6 Pair x 2.5 sq. mm 714 12 Pair x 2.5 sq. mm 715 SUPPLY OF HV CABLES (MULTI CORE) 716 Supply of 6.6 kV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 717 3 C x 240sq. mm, Al 718 Supply of 11 kV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured cables of following sizes as per EIL standardspecification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 719 3 C x 240 sq. mm, Al 720 3 C x 300 sq. mm, Al 721 SUPPLY OF HV CABLES (SINGLE CORE) 722 Supply of 6.6 KV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured single core cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 723 1 C x 630 sq. mm, Al 724 Supply of 11 KV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured single core cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 725 1 C x 630 sq. mm, Al 726 LAYING OF CABLES 727 Laying of cables of different voltage grade and types of the following overall diameters in ready trays/trenches/ supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 728 Cables with OD above 80 mm but upto 100 mm. 729 Cables with OD above 50 mm but upto 60 mm. 730 Cables with OD above 60 mm but upto 80 mm. 731 Cables with OD above 30 mm but upto 40 mm. 732 Cables with OD above 20 mm but upto 30 mm. 733 Cables with OD upto 20 mm. 734 Cables with OD above 40 mm but upto 50 mm. 735 Laying of cables (using cable pulling by motorized winch with torque limits) of different voltage grade and types of the following overall diameters in ready trays/trenches/supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 736 Cables with OD upto 20 mm. 737 Cables with OD above 20 mm but upto 30 mm. 738 Cables with OD above 30 mm but upto 40 mm. 739 Cables with OD above 40 mm but upto 50 mm. 740 Cables with OD above 50 mm but upto 60 mm. 741 Cables with OD above 60 mm but upto 80 mm. 742 Cables with OD above 80 mm but upto 100 mm. 743 END TERMINATIONS 744 Fire proofing of cables including supply of all fire proofing paint, including all labour and materials, as per IEC-60331, specifications of this tender and directions of Engineer-in- Charge. (Actual area of surface painted shall be measured). 745 Supply of Unearthed grade H.V. termination kits of (indoor/outdoor type) as per EIL standard specification No. 6-51-0051, excluding cable glands and lugs, as per approved drawings and as per specifications of this tender and directions of Engineer-in-Charge. 746 3 Core cable Indoor termination kit for 6.6 kV240 mm² 747 3 Core cable Outdoor termination kit for 6.6 kV240 mm² 748 3 Core cable Indoor termination kit for 6.6 kV300 mm² 749 3 Core cable Indoor termination kit for 11 kV300 mm² 750 3 Core cable Indoor termination kit for 11 kV240 mm² 751 1 Core cable Indoor termination kit for 6.6 kV630 mm² 752 1 Core cable Indoor termination kit for 11 kV630 mm² 753 Termination of Unearthed grade HV cables and connection of leads including fixing of cable glands,supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug onto the conductor, restoration of the insulation, clamping of cable cores and earthing of armour, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excluding supply of termination kits and cable glands). 754 3 Core cable termination kit for 6.6 kV300 mm² 755 3 Core cable termination kit for 6.6 kV240 mm² 756 3 Core cable termination kit for 11 kV300 mm² 757 3 Core cable termination kit for 11 kV240 mm² 758 1 Core cable termination kit for 6.6 kV630 mm² 759 1 Core cable termination kit for 11 kV630 mm² 760 Termination of XLPE insulated armoured power cables (up to 1100 V grade) and connection of leads excluding the supply of cable glands and lugs but includingfixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 761 Cables with OD above 60 mm but upto 80 mm. 762 Cables with OD above 40 mm but upto 50 mm. 763 Cables with OD above 30 mm but upto 40 mm. 764 Cables with OD above 50 mm but upto 60 mm. 765 Cables with OD upto 20 mm. 766 Cables with OD above 20 mm but upto 30 mm. 767 Termination of communication, fire alarm & control paired cables and connection of leads excluding the supply of cable glands and lugs but including fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations,cutting, stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable- cores, marking with wire number, ferrules etc., including all labour and materials,as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 768 All sizes from 1P to 4P and upto 2.5 sq. mm 769 All sizes from 5P to 10P and upto 2.5 sq. mm 770 All sizes from 11P to 15P and upto 2.5 sq. mm 771 STRAIGHT THROUGH JOINTS 772 Supply and Making of heat shrinkable type straight through joints for 1100 volt grade power cablesas per EIL standard specification No. 6-51-0051, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 773 Cables with OD above 30 mm but upto 40 mm. 774 Cables with OD above 50 mm but upto 60 mm. 775 Cables with OD above 60 mm but upto 80 mm. 776 Cables with OD upto 20 mm. 777 Cables with OD above 40 mm but upto 50 mm. 778 Cables with OD above 20 mm but upto 30 mm. 779 Supply of heat shrinkable type Straight through jointing kits for Unearthed grade H.V. cables of the following sizes,as per EIL standard specification No. 6-51-0051, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 780 3 Core cable Straight through jointing kits for 6.6 kV240 mm² 781 3 Core cable Straight through jointing kits for 11 kV300 mm² 782 1 Core cable Straight through jointing kits for 6.6 kV630 mm² 783 1 Core cable Straight through jointing kits for 11 kV630 mm² 784 Making of Straight through joints for H.V. cables of following sizes excluding supply of jointing kit and accessories, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 785 3 Core cable Straight through jointing kits for 6.6 kV240 mm² 786 3 Core cable Straight through jointing kits for 11 kV300 mm² 787 1 Core cable Straight through jointing kits for 6.6 kV630 mm² 788 1 Core cable Straight through jointing kits for 11 kV630 mm² 789 Supply and Making of heat shrinkable type straight through joints for communication, fire alarm & control paired cables, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 790 All sizes from 5P to 10P and upto 2.5 sq. mm 791 All sizes from 11P to 15P and upto 2.5 sq. mm 792 All sizes from 1P to 4P and upto 2.5 sq. mm 793 G.I. & PVC PIPES 794 Supply and laying of following sizes ofG.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 795 100 mm NB. 796 150 mm NB. 797 50 mm NB. 798 STRUCTURAL STEEL 799 Supply, fabrication, galvanising andinstallation of base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, cable and cable tray supports out of rolled MS sections, pipes, plates etc. including welding, bolting, rivetting, supply of necessary anchor bolts and grouting etc., including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Any item weighing up to 1 kg. or less shall neither be measured nor paid). 800 CABLE - TRAYS 801 Supply and installation of prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type with a rung as per std. 7-51-0333, of approved make and cable tray fittings, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 802 Reducers 750 - 450 RHS. 803 Reducers 750 - 600 RHS. 804 Reducers 750 - 600 LHS. 805 Horizontal bends for 450 mm wide tray with 1000 mm bending radius. 806 Horizontal bends for 600 mm wide tray with 1000 mm bending radius. 807 Vertical outside bends for 450 mm wide tray with 1000 mm bending radius. 808 Vertical outside bends for 600 mm wide tray with 1000 mm bending radius. 809 Vertical inside bends for 600 mm wide tray with 1000 mm bending radius. 810 Tee Joints for 450 mm wide tray with 1000 mm bending radius. 811 Tee Joints for 600 mm wide tray with 1000 mm bending radius. 812 Tee Joints for 750 mm wide tray with 1000 mm bending radius. 813 Cross Joints for 450 mm wide tray with 1000 mm bending radius. 814 Cross Joints for 750 mm wide tray with 1000 mm bending radius. 815 Vertical inside bends for 750 mm wide tray with 1000 mm bending radius. 816 300 mm wide Straight run cable tray. 817 Horizontal bends for 750 mm wide tray with 1000 mm bending radius. 818 Vertical outside bends for 750 mm wide tray with 1000 mm bending radius. 819 600 mm wide Straight run cable tray. 820 Reducers 750 - 300 RHS. 821 Reducers 600 - 300 RHS. 822 Horizontal bends for 300 mm wide tray with 1000 mm bending radius. 823 Vertical outside bends for 300 mm wide tray with 1000 mm bending radius 824 Vertical inside bends for 300 mm wide tray with 1000 mm bending radius 825 Tee Joints for 300 mm wide tray with 1000 mm bending radius. 826 450 mm wide Straight run cable tray. 827 750 mm wide Straight run cable tray. 828 Supply and installation of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 829 150 mm wide. 830 60 mm wide. 831 100 mm wide. 832 Supply, fabrication andinstallation of 0.91 mm (20 gauge) GI sheet covers for cable trays, including necessary hardwares, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 833 CABLE GLANDS 834 Supply of nickel-plated, flame proof IIA/IIB double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 835 Cables with OD above 50 mm but upto 60 mm. 836 Cables with OD above 30 mm but upto 40 mm. 837 Cables with OD above 40 mm but upto 50 mm. 838 Cables with OD above 60 mm but upto 80 mm. 839 Cables with OD above 20 mm but upto 30 mm. 840 Cables with OD upto 20 mm. 841 Supply of nickel plated brass double compression cable glands suitable for outdoor installations (WP) of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 842 Cables with OD upto 20 mm. 843 Cables with OD above 20 mm but upto 30 mm. 844 Cables with OD above 30 mm but upto 40 mm. 845 Cables with OD above 40 mm but upto 50 mm. 846 Cables with OD above 50 mm but upto 60 mm. 847 Cables with OD above 60 mm but upto 80 mm. 848 Supply of nickel plated brass single compression cable glands of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 849 Cables with OD upto 20 mm. 850 Cables with OD above 20 mm but upto 30 mm. 851 Cables with OD above 30 mm but upto 40 mm. 852 Cables with OD above 40 mm but upto 50 mm. 853 Cables with OD above 50 mm but upto 60 mm. 854 Cables with OD above 60 mm but upto 80 mm. 855 Cables with OD above 80 mm but upto 100 mm. 856 Supply and fixing of FLP(IIA/IIB) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 857 Cables with OD above 60 mm but upto 80 mm 858 Cables with OD above 30 mm but upto 40 mm 859 Cables with OD above 40 mm but upto 50 mm 860 Cables with OD above 50 mm but upto 60 mm 861 Cables with OD up to 20 mm 862 Cables with OD above 20 mm but upto 30 mm 863 MARKERS 864 Supply and installation of earth pit markers for directly buried GI pipe electrodes as per std. 7-51-0101 with 14 SWG enamelled steel plate engraved with white letters BURIED, EARTH ELECTRODE on JADE green background complete with support and foundation, including all labour and materials, as per approved drawings, specifications of this tender and direction of Engineer-in-Charge. 865 Supply and installation of cable markers as per std. 7-51-0301, for underground cable runs with 14 SWG enamelled steel plate with white lettering on jade green background inclusive of providing and fixing supports, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 866 CABLE LUGS 867 Supply of crimping type long barrel tinned copper lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 868 All sizes from 50 to 185 sq. mm 869 All sizes from 16 to 35 sq. mm 870 All sizes from 240 to 400 sq. mm 871 All sizes upto 10 sq. mm 872 All sizes from 500 to 1000 sq. mm 873 Supply of crimping type long barrel aluminium lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 874 All sizes upto 10 sq. mm 875 All sizes from 240 to 400 sq. mm 876 All sizes from 16 to 35 sq. mm 877 All sizes from 50 to 185 sq. mm 878 All sizes from 500 to 1000 sq. mm 879 Supply of crimping type long barrel Bimetallic lugs with Al barrel & tinned Cu palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 880 All sizes from 50 to 185 sq. mm 881 All sizes from 240 to 400 sq. mm 882 All sizes upto 10 sq. mm 883 All sizes from 16 to 35 sq. mm 884 All sizes from 500 to 1000 sq. mm 885 Supply of crimping type long barrel Bimetallic lugs with tinned Cu barrel & Al palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 886 All sizes upto 10 sq. mm 887 All sizes from 16 to 35 sq. mm 888 All sizes from 240 to 400 sq. mm 889 All sizes from 50 to 185 sq. mm 890 All sizes from 500 to 1000 sq. mm 891 FIRE PROOFING OF CABLES 892 Fire proofing of cables including supply of all fire proofing paint, including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge. (Actual area of surface painted shall be measured). 893 ADAPTORS / REDUCERS / NIPPLES ETC. 894 Supply and fixing nickel-plated brass adaptors/ reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 895 Eqpt. Thread 3/4 PF (J.I.S.)-E.T. Thread 3/4ET 896 Eqpt. Thread 1 PF (J.I.S.) - E.T. Thread 3/4ET 897 Eqpt. Thread 1 PF (J.I.S.) -E.T. Thread 1ET 898 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/4ET 899 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/2ET 900 Eqpt. Thread 2 PF (J.I.S.) -E.T. Thread 1-1/2ET 901 Supply and installation of GI reducers/enlargers of following sizes for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 902 Eqpt. Thread PG 13.5(DIN) - E.T. Thread 3/4 ET 903 Eqpt. Thread PG 16 (DIN) -E.T. Thread 3/4 ET 904 Eqpt. Thread PG 21 (DIN) -E.T. Thread 1ET 905 Eqpt. Thread PG 29 (DIN) -E.T. Thread 1-1/2 ET 906 Eqpt. Thread 1 ET (IS) -E.T. Thread 3/4 ET 907 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1 ET 908 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1-1/2 ET 909 Eqpt. Thread 2 ET (IS) -E.T. Thread 1-1/2 ET 910 Supply and fixing FLP(IIA/IIB), weatherproof, nickel-plated brass adaptors/reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 911 Eqpt. Thread 3/4 PF (J.I.S.)-E.T. Thread 3/4ET 912 Eqpt. Thread 1 PF (J.I.S.) -E.T. Thread 3/4ET 913 Eqpt. Thread 1 PF (J.I.S.) -E.T. Thread 1ET 914 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/4ET 915 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/2ET 916 Eqpt. Thread 2 PF (J.I.S.) -E.T. Thread 1-1/2ET 917 Supply and installation of FLP(IIA/IIB) GI reducers/ enlargers of following sizes for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 918 Eqpt. Thread PG 13.5(DIN) - E.T. Thread 3/4 ET 919 Eqpt. Thread PG 16 (DIN) -E.T. Thread 3/4 ET 920 Eqpt. Thread PG 21 (DIN) -E.T. Thread 1ET 921 Eqpt. Thread PG 29 (DIN) -E.T. Thread 1-1/2 ET 922 Eqpt. Thread 1 ET (IS) -E.T. Thread 3/4 ET 923 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1 ET 924 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1-1/2 ET 925 LIGHTING POLES 926 Supply and installation of Lighting Poles for floor mounting as per std. 7-51-0201, including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 927 Lighting poles including supply and connection of wires upto fixtures for safe areas. 928 Supply andinstallation of platform Lighting pole as per std. 7-51-0202,including all welding, structural works, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 929 Lighting poles including supply and connection of wires upto fixtures for safe areas. 930 Supply andinstallation of street lighting poles (single bracket/double bracket) including built in marshalling box andnecessary wire/cable running from marshalling box to the lighting fixture, cable termination and connection, fixing of cable glands and lugs,including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 931 Poles as per std. 7-51-0233 with MB as per 7-51-0208 for safe area 932 Poles as per std. 7-51-0234 sht. 2 of 2 (Single bracket) 933 HAZARDOUS AREA LIGHTING FIXTURES AND ACCESSORIES 934 Installation, connection, testing and commissioning of following types of flame proof/Div.2 lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 935 3-way, junction box. 936 4-way, junction box. 937 Well glass type pole mounting type for Ground Level. 938 Well glass type ceiling mounted. 939 Well glass type bracket mounted. 940 Well glass type pole mounting type for Platform. 941 Supply and installation of Type-`A clamps(for bracket mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamp as per EIL std.no.7-51-0221, including supply and fixing of anchor fasteners, nuts and bolts, washers etc. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 942 Supply and installation of adapters for Platform and ground pole mounted lighting fixtures as per EIL std.no.7-51-0221, approved drawings, specifications of this tender and directions of Engineer-in-Charge. 943 Supply and installation of Type-`B clamps(for ceiling mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamps per EIL std.no.7-51-0221, including supply and fixing of anchor fastners,nuts and bolts,washers as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 944 SAFE AREA LIGHTING FIXTURES 945 Supply, installation, testing and commissioning of following energy efficient lighting fixtures and connecting to wiring junction box/marshalling box complete with lamps and necessary control gear including supply of all connected materials like flexible conduit, clamps, supports, chains, anchor fastners, bolts, nuts and washers etc. as required, including supply and fixing of cable glands, lugs, including all labour and materials, as per approved drawings, data sheet for lighting fixture schedule, EIL installation standards, specifications of this tender and directions of Engineer-in-Charge. 946 Type LED SFD-12 Fixtures. 947 Type LED BK-3 Fixtures. 948 Type LED ST-10 Fixtures. 949 Type LED FD-1 Fixtures. 950 Type LED FD-2 Fixtures. 951 Type LED FD-3 Fixtures. 952 JUNCTION BOXES (OUTDOOR / INDOOR TYPE) 953 Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 954 3 way. 955 4 way. 956 LIGHTING / POWER PANELS AND DISTRIBUTION BOARDS 957 Supply, installation, connection, testing and commissioning offlame proof weather proof lighting/power panels(for gas group IIA/IIB) as per EIL std. spec. 6-51-0008, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 958 40 A, 4 pole incomer MCB isolator and 12 Nos. outgoingdouble poleMCBs with ELCB (upto 20 A). 959 40 A, 4 pole incomer MCB isolator and 6 Nos. outgoingdouble poleMCBs with ELCB (upto 20 A). 960 Supply, installation, connection, testing and commissioning of safe area lighting/power panels, surface/flush mounting type, wall mounting type in dust tight (with hinged cover) sheet steel enclosure having 4 pole incomer and single pole MCB (9 kA type) for outgoing circuit control with completewiring, including cable termination, connection and fixing of cable glands, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 961 40 A, 4 pole incomer MCB isolator and 6 Nos. outgoingdouble poleMCBs (upto 20 A) with RCCBs in each outgoing circuits suitable for outdoor location with IP-65 degree of protection 962 40 A, 4 pole incomer MCB isolator and 12 Nos. outgoingdouble poleMCBs (upto 20 A) with RCCBs in each outgoing circuits suitable for outdoor location with IP-65 degree of protection 963 63 A, 4 pole incomer MCB isolator and 18 Nos. outgoingdouble poleMCBs (upto 20 A) with RCCBs in each outgoing circuits suitable for outdoor location with IP-65 degree of protection 964 WIRING 965 Circuit wiring in non-hazardous areas using (size given below), copper conductor, PVC insulated, FRLS outer sleeve cables (third core for earthing),from lighting/powerpanel/distribution junction box, excluding the supply of cable, junction boxes and cable glands but including termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 966 3 C x 2.5 sq. mm 967 3 C x 4 sq. mm 968 Circuit wiring in hazardous areas using (sizes given below) copper conductor, XLPE insulated, FRLS outer sleeve armoured cables (third core for earthing) from lighting/power panel/distribution junction box onwards, excluding the supply of cables, junction boxes and cable glands but including fixing of cable glands, supply and fixing of clamps, cable terminations and connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 969 3 C x 2.5 sq. mm 970 EARTH ELECTRODES 971 Supply, installation, testing and commissioning of GI earth electrodes, complete with earth pit as per std. 7-51-0102 and all necessary materials including excavation of earth pit, filling with charcoal and salt, back filling, providing necessary brickwork, connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 972 GI earth electrode as per std. 7-51-0102. 973 COPPER EARTH ELECTRODES 974 Supply, installation, testing and commissioning of Cu earth electrodes complete with 38 mm outer dia x 3 mm thick Cu pipe in a depth of 25Mtr, 3mm Thick 4Inch X 12 Inch Copper plate, earth pit and all necessary materials including excavation of earth pit, filling with charcoal and salt, bentonite powder, back filling, providing necessary brickwork, connections, including all labour and materials, as per sketch B861-000-16-50-DS-4001, approved drawings, specifications of this tender and directions of Engineer-in-Charge 975 EARTH STRIPS 976 Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 977 100 X 12 mm 978 40 x 5 mm 979 25 x 3 mm 980 50 x 6 mm 981 Supply, installation and connection of following GI earthing strip buried individually at a depth of 500 mm including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, excavation and refilling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 982 100 X 12 mm 983 40 x 5 mm 984 25 x 3 mm 985 50 x 6 mm 986 EARTHING CONNECTION 987 Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 988 3/8 dia (10 mm) flexible rope. 989 5/8 dia (16 mm) flexible rope. 990 8 SWG GI Wire. 991 Supply and installation of 25 sq. mm (168/0.01772) copper flexibles of following length with copper lugs crimped on both sides for earthing of pipeline vessels, equipments (non electrical) as per std. 7- 51-0112, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 992 300 mm 993 500 mm 994 1500 mm 995 EARTH PLATES 996 Supply, installation and connection of GI earth plates as per std. 7-51-0103, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 997 GI earth plate as per std. 7-51-0103. 998 EARTHING CONNECTORS 999 Supply and installation of MS ear of width 50 mm and thickness 5 mm for earthing of process vessels, steel structures, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1000 Minimum 75mm to maximum 300 mm long 1001 Supply and installation of stainless steel ear of width 50 mm and thickness 5 mm for earthing of process vessels, steel structures, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1002 Minimum 75mm to maximum 300 mm long 1003 LIGHTNING RODS 1004 Supply and installation of GI lightning rod as per std. 7-51-0503 including supply of all hardware etc., including all labour and materials,as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1005 GI lightning rod as per std. 7-51-0503. 1006 LAYING OF COMMUNICATION / FIRE ALARM CABLES 1007 Horizontal and vertical laying/pulling through of communication/fire alarm cables of the following overall diameters in ready trays/trenches/conduits or supported on structures including supplying and fixing of GI saddle and saddle bars, stainless steel strip number tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 1008 Cables of overall dia. above 35 mm. 1009 Cables of overall dia. upto 35 mm. 1010 Laying of HDPE ducts for laying of optical fiber cables between various substations, pulling through pipes or supported on structures including supplying and fixing of GI saddle and saddle bars, including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 1011 HDPE duct with overall dia. Upto 60mm 1012 HDPE duct with overall dia. above 60mm 1013 Laying of optical fiber cables between various buildings in already laid HDPE conduits for plant communication and fire alarm data highway, feeder differential protection, etc., including supply of all hardware, splice connectors, accessories, pulling through pipes or supported on structures including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1014 Cables of overall dia. upto 40 mm. 1015 Cables of overall dia. above 40 mm. 1016 STRAIGHT THROUGH JOINTS COMMUNICATION / FIRE ALARM CABLES 1017 Making of straight through joints for polyethylene insulated armoured jelly filled/ non filled overall PVC jacketed, including supply of all necessary materials for the joint, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1018 For Non-Jelly filled cables of size .9 mm5 pair 1019 For Non-Jelly filled cables of size .9 mm20 pair 1020 For Non-Jelly filled cables of size .9 mm10 pair 1021 For Jelly filled cables of size .63 mm²20 pair 1022 For Non-Jelly filled cables of size 1.5 mm²2 pair 1023 Supply of straight through jointing kit for Mono mode, multitube/unitube, jelly filled, Optical fiber cable with non metallic armour with following number of fibers, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1024 6 Fiber 1025 Supply of straight through jointing kit for Multi mode, multitube/unitube, jelly filled, Optical fiber cable with non metallic armour with following number of fibers, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1026 6 Fiber 1027 Making of straight through jointing kit for Mono/Multi mode, multitube/unitube, jelly filled, Optical fiber cable with non metallic armour with following number of fibers, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1028 6 Fiber 1029 END TERMINATIONS FOR COMMUNICATION/FIRE ALARM CABLES. 1030 Termination of following polyethylene insulated armoured jelly filled/ non filled cables including cutting, stripping of cable insulation, sealing of jacket including supply of termination kit, hardware, including all labour and materials, as per approved drawings, specification of this tender and directions of Engineer-in-Charge. 1031 For Non-Jelly filled cables of size .9 mm5 pair 1032 For Non-Jelly filled cables of size .9 mm2 pair 1033 For Non-Jelly filled cables of size .9 mm50 pair 1034 For Non-Jelly filled cables of size .63 mm20 pair 1035 For Non-Jelly filled cables of size 1.5 mm2 pair 1036 For Non-Jelly filled cables of size 1.5 mm²2 pair 1037 Supply ,Installation, testing and commissioning of Fiber Optic Patch panel (LIU) for following type & number of fiber for OFCs including all accessories for terminating, pigtails with Connectors, patch cords with connectors, Splicing sleeves and splice tray including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge 1038 For 6 fiber Mono mode cable with LC pigtails and LC patch cords 1039 For 6 fiber Mono mode cable with SC pigtails and LC patch cords 1040 For 6 fiber Mono mode cable with ST pigtails and LC patch cords 1041 For 6 fiber Mono mode cable with LC pigtails and SC patch cords 1042 For 6 fiber Mono mode cable with LC pigtails and ST patch cords 1043 For 6 fiber Mono mode cable with SC pigtails and SC patch cords 1044 For 6 fiber Mono mode cable with SC pigtails and ST patch cords 1045 For 6 fiber Mono mode cable with ST pigtails and SC patch cords 1046 For 6 fiber Mono mode cable with ST pigtails and ST patch cords 1047 Termination of optical fiber cables for various systems including supply of all hardware, splice connectors, accessories, including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge 1048 6 Fiber 1049 SUPPLY OF COMMUNICATION / FIRE ALALRM CABLE / CONDUITS / DUCTS 1050 Supply of communication, fire alarm & control paired cables of following sizes as per EIL standard specification No.6-51-0052, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1051 Jelly filled cables of size .9 mm20 pair 1052 Jelly filled cables of size .9 mm10 pair 1053 Non-Jelly filled cables of size .9 mm5 pair 1054 Non-Jelly filled cables of size .9 mm2 pair 1055 Non-Jelly filled cables of size 1.5 mm2 pair 1056 Non-Jelly filled cables of size .9 mm50 pair 1057 Non-Jelly filled cables of size .63 mm2 pair 1058 Supply of Mono mode, jelly filled, Optical fiber cable with non metallic armour with following number of cores & construction, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1059 6 Fiber multitube construction 1060 Supply of Multi mode, jelly filled, Optical fiber cable with non metallic armour with following number of cores & construction, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1061 6 Fiber multitube construction 1062 Supply of HDPE ducts for laying of optical fiber cables between various substations, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 1063 HDPE duct with overall dia. Upto 60mm 1064 HDPE duct with overall dia. above 60mm 1065 CIVIL WORKS/M.S. CHEQUERED PLATE 1066 Making through and through cut outs in pockets of size 150 mm dia in the RCC floor/walls of trenches/buildings of thickness upto 200mm for facilitation cable entries using concrete cutting machines including all labour and materials as per approved drawings, specifications of this tender and directions of Engineer -in-charge 1067 Excavation and backfilling of trenches for cables and earth strip etc. , for a maximum depth of 1.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth up to a distance of 30 m, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excavated trench dimensions shall be measured). 1068 Excavation and backfilling of trenches in all types of soil including rock. 1069 Excavation and backfilling of trenches in all types of soil except rock. 1070 Supply and laying of 40 mm size gravel in one layer of 100/150 mm thick including dressing of soil surface and laying the aggregate in uniform layer and density, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge ( Aggregate will be measured in boxes of size 1.5 m x 1.5 m x 0.5 m which shall be taken as 1 cubic metre, the boxes are to be furnished by the contractor free of cost for measuring purposes). 1071 40 mm size gravel. 1072 Supply and spreading of approved fine river sand/stone dust in cable trenches, including all labour and materials, specifications of this tender and directions of Engineer-in-Charge. 1073 Fine river sand. 1074 Supply and spreading of approved FLY ASH BRICKS - TYPE-5 of 75 mm thickness in cable trenches for cable protection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Actual area of laid brick surfaces shall be measured). 1075 Bricks. 1076 Supply, fabrication and installation of 6 mm thick M.S. chequered plate for covering floor cut- outs/cable trenches etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1077 6 mm thick M.S. chequered plate. 1078 Making through and through cut outs in pockets of following shape and size in the RCC floor/ walls of trenches/ buildings of thickness above 200 mm and upto 400 mm for facilitating cable/ duct entries, using concrete cutting machines and making cut out good using plastering and painting including all material and labour as per approved drawings, specification of this tender and directions of Engineer-in-charge. 1079 Rectangular Cut Out of length 200 mmwidth 200 mm 1080 Circular Cut Out of diameter 150 mm 1081 LAN SYSTEMS 1082 Supply, installation, mounting, testing & commissioning of following Ethernet switches including performance warranty certification(for LAN) of 25 years through OEM, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-charge. 1083 Etherswitch Rack Type-I 1084 PAINTING & MARKING 1085 Letter painting and marking of all buses of switchboards, all incomers, bus couplers, outgoings with details of Tag No, feeder rating in KW/Amp, sending end source, in the front of the panels and bus bar, panel nos.etc. on the rear side of the panels for all switchboards, all other substation equipment viz.transformers, capacitors, neutral grounding resistors, VFD panels, other panels, etc for equipment housed in electrical substations including supply of all material such as stickers, enamel paints, stencil, etc including supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge. 1086 Each alphabet/character above 2 inch and Upto 4 inch in height/length 1087 Each alphabet/character upto 2 inch in height/length 1088 Each alphabet/character above 4 inch and Upto 8 inch in height/length 1089 Each alphabet/character above 8 inch and Upto 12 inch in height/length 1090 Letter painting of tag nos., applicable circuit nos. for identification with red/black/white paint for all outdoor equipment in safe and hazardous areas viz.light fittings, control gear boxes, lighting/power panels, welding receptacles, convenience receptacles, local control stations, fire alarm manual call points, fire alarm detectors, motors,field call stations, loud speakers, etc. including supply of enamel paint, all hardware as required,supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge. 1091 Each alphabet/character above 2 inch and Upto 4 inch in height/length 1092 Each alphabet/character upto 2 inch in height/length 1093 Each alphabet/character above 4 inch and Upto 8 inch in height/length 1094 Each alphabet/character above 8 inch and Upto 12 inch in height/length 1095 INSTRUMENTATION 1096 PRESSURE GAUGES AND ACCESSORIES (Incl. supply of Impulse pipe/Tubing material) 1097 Installation of Line mounted or Remote mounted or Local Gauge Board mounted Pressure gauge/ Pressure gauge with Pulsation Dampener/ Syphon/ Overrange Protector (direct/ surface mounted/ diaphragm seal type) inclusive of mounting of instrument, supply of piping and tubing materials such as valves, fittings, pipes, tubes, compression fittings, as per specification, supply and erection of supports, mounting on support, (if support required), laying of capillary on supports, fabrication and installation of manifolds/ impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument, Gauge Board, Yoke, and Calibration. 1098 In Carbon Steel as per Standard 7-52-1103 1099 In Carbon Steel as per Standard 7-52-4079. 1100 DIFFERENTIAL PRESSURE GAUGES (Incl. supply of Impulse pipe/Tubing materials) 1101 Installation of Differential Pressure gauge with/ without pulsation dampner/Syphon/ overrange protector including one side capillary type)/ Diaphragm seal type Differential Pressure gauge, surface/ yoke mounted inclusive of mounting of instrument, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, supply and erection of supports, mounting on support, laying of capillary on supports, fabrication and installation of manifolds/ impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument and Calibration 1102 In Carbon Steel as per Standard 7-52-4077. 1103 In Carbon Steel as per Standard 7-52-4078. 1104 PRESS.INSTRUMENTS (Incl. supply of Impulse pipe/Tubing material) 1105 Installation of Pressure Transmitters/ Pressure Switches (with or without Pulsation Dampener, Overrange Protector)/ Diaphragm seal type Pressure Transmitters/ Diaphragm seal type Pressure Switches including mounting on Yoke/ Surface, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, supply of supports for capillary, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per Standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instrument, all Electrical/ Pneumatic connections, Yoke and Calibration. 1106 In Carbon Steel as per Standard 7-52-1101 1107 In Carbon Steel as per Standard 7-52-1159 1108 In Carbon Steel as per Standard 7-52-1188 1109 In Carbon Steel as per Standard 7-52-1102 1110 In Carbon Steel as per Standard 7-52-1163 1111 In Stainless Steel as per Standard 7-52-1159 1112 DIFFERENTIAL PRESSURE INSTRUMENTS (Incl. supply of Impulse pipe/Tubing materials) 1113 Installation of Differential Pressure Transmitters (including one side capillary type)/ Differential Pressure Switch(including one side capillary type)/ Diaphragm seal type DP Transmitters/ Diaphragm seal type DP Switch including mounting on Yoke/ Surface, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, ,supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per Standard indicated below, supply and fabricating of supports for capillary, laying of capillary on supports, painting, installation of flushing connection, hydraulic testing of impulse lines as per standard indicated below but exclusive of Supply of Instrument, all Electrical/ Pneumatic connections, Yoke and Calibration. 1114 In Carbon Steel as per Standard 7-52-1140 1115 In Carbon Steel as per Standard 7-52-1192 1116 DIFFERENTIAL PRESSURE (FLOW) TRANSMITTERS (Incl. supply of Impulse pipe/Tubing material) 1117 Installation of Differential pressure(with or without integral manifold)/ Diaphragm Seal Type Differential Pressure flow instruments including Mounting on Yoke, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compressive fittings as per specifications enclosed,supply of supports for impulse lines/ manifolds/ capillary, fabrication and Installation of manifolds/ impulse lines with supports as per Standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instruments, all Electrical/ Pneumatic connections, Yoke and Calibration. 1118 In Carbon Steel as per Standard 7-52-3489. 1119 In Carbon Steel as per Standard 7-52-3490. 1120 In Carbon Steel as per Standard 7-52-3491. 1121 In Stainless Steel as per Standard 7-52-3490. 1122 ULTRASONIC FLOWMETER 1123 Installation of Transmitters/ Preamplifiers for ultrasonic flowmeters on yoke/ instrument (if required) including Straight length spool piece with pressure and temperature compensation loop including laying and termination of interconnection cable supports for cables as required, painting of supports but exclusive of supply of instrument, yoke and calibration. 1124 Installation of Transmitters/ Preamplifiers for Ultrasonic Flowmeters 1125 DIFFERENTIAL PRESSURE (LEVEL) TRANSMITTERS (Incl. supply of Impulse pipe/Tubing material) 1126 Installation of DP type/ Diaphragm Seal DP type Level Instrument including mounting on Yoke, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compressive fittings, as per specifications enclosed, supply of supports for impulse line/ capillary/ manifold, fabrication of manifolds and erection wherever required, laying of capillary on supports, fabrication and installation of impulse lines with support as per Standard indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument,all Electrical/ Pneumatic connections, Yoke and Calibration. 1127 In Carbon Steel as per Standard 7-52-1523. 1128 In Carbon Steel as per Standard 7-52-1524. 1129 LEVEL GAUGES (Incl. supply of Impulse pipe/Tubing material) 1130 Installation of Level Gauges on Vessel/ Piping/ Standpipes with minor modification wherever required, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings, as per specifications enclosed, fabrication of primary piping, fabrication and installation of drain valve/ vent valve assembly as per Standard indicated below, hydraulic testing of gauge, installation of illuminators/ non-frosting extension if required but exclusive of Supply of Gauges and Illuminators. 1131 In Carbon Steel as per Standard 7-52-1527 1132 SERVO TYPE TANK GAUGES 1133 Installation/ interconnection of Servo type Gauges with/ without Tank Farm Management (TFM) System components. Installation of Gauge, Isolation ball valve, Calibration chamber on flanged equipment nozzle, with or without still well, Junction boxes with barriers, power switch, all Electrical connections but exclusive of Supply of Instrument, still well and Calibration/ Setting of gauges. 1134 Servo Gauge Installation 1135 RADAR LEVEL INSTRUMENTS 1136 Installation of radar sensor and antenna, flanged type connection on equipment nozzle/ rail mounting with/without still well, but exclusive of supply of instruments. Installation of electronics units (total system for indication, transmission, marshalling etc. for one tank), including mounting on Yoke, supply of angle tray with supports, fabrication and erection of supports and laying of cable up to instrument/probe with clamps, termination of cables at both ends, but exclusive of supply of Instruments, supply of yokes and Calibration. 1137 Installation of Top Mounted Radar 1138 Installation of tank side indicator/electronic unit (total system for indication/ transmission/marshalling etc., as required for one tank) including mounting on yoke/support, fabrication and erection of supports, laying and termination of interconnecting cable up to instrument/ indicator with clamps, termination of cables at both ends, painting of supports but exclusive of supply of instruments, yoke, cables and calibration. 1139 Tank Side Indicator 1140 TEMPERATURE INSTRUMENTS 1141 Installation of Temperature Indicators/ Gauges (Filled system/ Bimetallic) RTD/ Thermocouple/ Temperature Switches/ Temperature transmitters with flanged thermowell inclusive of installation of machined/ built-up thermowells on the nozzle and installation of Instruments, Electrical/ Pneumatic connection but exclusive of Supply of Instruments/ Elements/ Thermowell, and Calibration. 1142 Temperature Indicator/ Gauges (Bimetallic Type) with thermowell on flanged wells 1143 TEMPERATURE TRANSMITTERS (REMOTE MOUNTED) 1144 Thermocouple/ RTD element with thermowell, along with Temperature Transmitter remote mounted. Installation of transmitter including mounting on yoke, fabrication and erection of supports with clamps and laying of extension/RTD cable upto thermocouple, termination of cables at both ends, painting of supports but exclusive of Supply of Instruments, Cable, Yoke and Calibration. 1145 Temperature transmitter and RTD. 1146 Temperature Transmitter and RTD with flanged well 1147 Multipoint temperature transmitter with Thermocouple / RTD 1148 MISCELLANEOUS ITEMS AND DEVICES 1149 Mounting of Miscellaneous instrument items as listed below on Yoke; fabrication and erection of Supports and including installation of instrument items,paintingofsupportsbutexclusiveofSupplyofInstrumentitems, Piping/ Tubing material / Calibration and supply and erection of Yoke support. 1150 ER probe assembly with accessories like flange, valve etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. 1151 Corrosion coupon assembly with accessories like flange, valve etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. 1152 Weather proof Push Button Station/ Selector Switches. 1153 Corrosion Transmitters 1154 CALIBRATION/ TESTING 1155 Cleaning, adjusting stroke/ positioner, stroke speed checking of Control and On-off (Shutdown) valves. Providing equipments, necessary test jig, Instrument Air, Nitrogen Cylinders, test reports, all consumable and loop testing. Excludes flow calibration 1156 Control Valves 1157 Self Actuated Pressure reducing valves 1158 Cleaning, set pressure tests of Pressure Relief and Thermal Relief Valves. Providing equipment, necessary test jig, Instrument Air, Nitrogen Cylinders, test reports, all consumable. Excludes flow calibration. 1159 Sizes upto 3/4 x 1 threaded 1160 Inlet Sizes upto 2 flanged, rating 150# to 2500# 1161 Cleaning, calibration of the instrumentslisted below including removal of instrumentfromreinstalledlocationslikepanels,enclosures,racks,field etc.,andfixingthembackinrespectiveplaces,providingequipments, necessarytestjig,InstrumentAir,NitrogenCylinders,testreports,all consumable, exceptforspecialimportedtestequipments for electronic instruments to be supplied by owner if available. 1162 Pressure gauges 1163 Pressure transmitters 1164 Differential Pressure Gauges 1165 Differential Pressure Transmitters for Flow, Level and D.P. 1166 Temperature gauges 1167 Temperature Transmitters 1168 Tank Level Instrument (Radar type) 1169 Servo Type Tank Gauges 1170 Electronic Local Indicator 1171 Cleaning, checking and functional tests for flowmeters. Providing equipments, necessary test jig, Instrument Air, test reports, all consumable, except for special imported test equipments for electronic instruments to be supplied by owner if available. Excludes flow calibration. 1172 Ultrasonic flowmeters 1173 LOOP CHECKING 1174 Loop checking (excluding calibration/ testing) of the instruments listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060. 1175 Pressure transmitters 1176 Differential Pressure Transmitters for Flow, Level and D.P. 1177 Temperature Transmitters 1178 Special Level Instruments/ Guided Wave / Ecclipse type Radar level instruments 1179 Tank Level Instruments (Radar type) 1180 Electronic Local Indicator 1181 Speed / Vibration Transmitter 1182 Push Button/Selector Switches/Lamps 1183 Control valve positioner 1184 Corrosion Transmitter 1185 Loop checking (excluding calibration/ testing) of the flowmeters listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060. 1186 Ultrasonic flowmeters 1187 SUPPLY ITEMS 1188 Supply of Instrument items as per specifications enclosed elsewhere in the Tender. 1189 24 Orifice plate as per Instrument data sheet no. B861-700-YF-DS-0001. 1190 2/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-700-YF-DS-0001. 1191 3/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-700-YF-DS-0001/B861-851-YF-DS-0001. 1192 4/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-851-YF-DS-0001. 1193 Magnetic Level Gauge as per Instrument data sheet no. B861-701-YL-DS-2900. 1194 Breather valve as per Instrument data sheet no. B861-701-YB-DS-3200. 1195 Retractor Tool for ER probes system & Corrosion coupon system as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1196 Tubular ER Probe system (Tag No. 701-CP-1701) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-1701), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3001 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1197 Tubular ER Probe system (Tag No. 701-CP-1801) with ER probe assembly,corrosion transmitter (Tag No. 701-CT-1801), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3002 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1198 Tubular ER Probe system (Tag No. 701-CP-1901) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-1901), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3003 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1199 Tubular ER Probe system (Tag No. 701-CP-2001) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-2001), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3004 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1200 Tubular ER Probe system (Tag No. 701-CP-2101) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-2101), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3005 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1201 Corrosion coupon system (Tag No. 701-CC-1701) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3001 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1202 Corrosion coupon system(Tag No. 701-CC-1801) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon locationas per data sheet no. B861-701-YI-DS- 3002 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1203 Corrosion coupon system(Tag No. 701-CC-1901) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3003 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1204 Corrosion coupon system(Tag No. 701-CC-2001) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3004 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1205 Corrosion coupon system(Tag No. 701-CC-2101) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3005 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1206 24 V DC loop powered spare corrosion Transmitter. 1207 Type: Non-contact type Radar Level Instrument (Tag No. 700-LT-1601)as per data sheet no.B861-700-YL-DS-2000 , Smart Transmitter with integral display , Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART / 1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1208 Type: Non-contact type Radar Level Instrument (Tag no. 700-LT-1602)as per data sheet no.B861-700-YL-DS-2001 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply,Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1209 Type: Non-contact type Radar Level Instrument (Tag No. 701-LT-2201) as per data sheet no.B861-701-YL-DS-2000 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 8 Flanged connection / Top mounted, Flange Material: SS316 , Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1210 Type: Non-contact type Radar Level Instrument (Tag No. 701-LT-2203) as per data sheet no.B861-701-YL-DS-2001 , Smart Transmitter with integral display, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1211 Type: Non-contact type Radar Level Instrument (Tag No. 701-LT-2204) as per data sheet no.B861-701-YL-DS-2002 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply.Gauge Head: 6 Flanged connection / Top mounted , Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1212 Type: Non-contact type Radar Level Instrument (Tag No. 851-LT-5501) as per data sheet no.B861-851-YL-DS-2000 , Smart Transmitter with integral display , Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 8 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART / 1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1213 Type: Non-contact type Radar Level Instrument (Tag No. 851-LT-5502) as per data sheet no.B861-851-YL-DS-2001 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply.Gauge Head: 8 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1214 Type: Servo Level Instrument (TagNo. 701-LT-2202) as per data sheet no.B861-701-YL-DS-2003 , Smart Transmitter with integral display , Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART/ 1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1215 Signal cableXLPE insulatedFRLS 2 QUAD X1.5 mm2 as per data sheet no.B861-000-YS-DS-7006. 1216 2/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-700-YF-DS-0002. 1217 Signal cableFR2 QUAD X1.5 mm2 as per data sheet no.B861-000-YS-DS-7009. 1218 Industrial grade 4 1/2 digit digital Multimeter including accessories like battery, connecting pin, carry bag. 1219 Industrial grade digital mA loop calibrator including accessories like battery, connecting pin, carry bag. 1220 Industrial grade Multifunction calibrator with low , high pressure pump including accessories like charger, connecting pin, carry bag. 1221 Universal hand-held HART communicators with accessories including charger, connecting pin, carry bag. 1222 Differential Pressure (Flow) Transmitter-HART as per data sheet no. B861-700-YI-DS-3150 & B861-851-YI-DS-3150. 1223 Differential Pressure (Flow) Transmitter-HART as per data sheet no. B861-700-YI-DS-3151. 1224 Differential Pressure Transmitter-HART as per data sheet no. B861-700-YI-DS-3200. 1225 Differential Pressure (Level) Transmitter-HART as per data sheet no. B861-701-YI-DS-3050. 1226 Pressure Transmitter-HART as per data sheet no. B861-700-YP-DS-3001,B861-700-YP-DS-3002, B861-700-YP-DS-3003 & B861-701-YP-DS-3001. 1227 Pressure Transmitter-HART as per data sheet no. B861-701-YP-DS-3002 & B861-851-YP-DS-3002. 1228 Pressure Transmitter-HART as per data sheet no. B861-701-YP-DS-3003 & B861-851-YP-DS-3001. 1229 Multipoint Temperature Elements - RTD with thermowell as per data sheet no. B861-701-YT-DS-4050. 1230 Temperature Elements - RTD with thermowell as per data sheet no. B861-700-YT-DS-4101, B861-701-YT-DS-4002, B861-851-YT-DS-4001. 1231 Temperature Transmitter-HART as per data sheet no. B861-700-YI-DS-3100, B861-701-YI-DS-3100, B861-701-YI-DS-3101, B861-701-YI-DS-3102 & B861-851-YI-DS-3100. 1232 Temperature Elements - RTD as per data sheet no. B861-701-YT-DS-4001. 1233 Signal cableFR 1PX1.5 mm2 as per data sheet no.B861-000-YS-DS-7008. 1234 Pressure Gauges as per data sheet no. B861-851-YP-DS-1100 & B861-700-YP-DS-1100, B861-701-YP-DS-1100. 1235 Temperature Gauges with thermowell as per data sheet no. B861-851-YT-DS-4100, B861-700-YT-DS-4105, B861-701-YT-DS-4100. 1236 Pressure Gauges as per data sheet no. B861-700-YP-DS-1101, B861-701-YP-DS-1101. 1237 Differential Pressure Gauges as per data sheet no. B861-700-YP-DS-1102, B861-701-YP-DS-1102. 1238 Temperature Gauges with thermowell as per data sheet no. B861-700-YT-DS-4104, B861-701-YT-DS-4101. 1239 Signal cableXLPE insulatedFRLS 12PX1.5 mm2 1240 Signal cableXLPE insulatedFRLS 1PX1.5 mm2 1241 Supply of Junction boxes of various types and specifications 1242 Junction Box, Weatherproof type for 12 Pair Cable 1243 Junction Box, Weatherproof type for 3 Way 1244 Supply of Cable glands ofvarioustypes and specifications 1245 Weatherproof double compression type Cable gland, SS 304 material with PVC shroud, 1/2 NPTM 1246 Weatherproof double compression type Cable gland, SS 304 material with PVC shroud, 1 1/2 NPTM 1247 Weatherproof double compression type Cable gland, SS 304 material with PVC shroud, 3/4 NPTM 1248 Supply of plugs for cable entries of varioustypes and specifications 1249 Plug ,weatherproof type, SS 304 material, 1/2 NPTM 1250 Plug ,weatherproof type, SS 304 material, 1 1/2 NPTM 1251 Plug ,weatherproof type, SS 304 material, 3/4 NPTM 1252 Supply of compression tube fittings in Stainless Steel of various types and specifications 1253 Male Connector: Material: SS-316 : Size: 1/2 NPTM X 1/2 OD 153 Bar 1254 Male Connector: Material: SS-316 : Size: 1/4 NPTM X 1/4 OD 153 Bar 1255 Male Connector: Material: SS-316 : Size: 1/2 NPTM X 1/4 OD 153 Bar 1256 SS 316 Ball Valve 1/2 TH 41 Bar. 1257 Tube Union: Material: SS-316 ; Size: 1/2 OD x 1/2 OD 153 Bar 1258 Tube Cap; Material: SS-316 ; Size : 1/2 OD 153 Bar 1259 6 Way Air Manifold SS316 1260 Supply of instrument tubes of different types and specifications 1261 SS316L tube 1/2 OD 153 Bar 1262 SS316L tube 1/4 OD 153 Bar 1263 Supply of pipe and pipe fittings 1264 SS316 Pipe 1 PL End, SCH. 40S 1265 10% of impulse piping / tubing material subject to minimum 1 number (1 meter for pipe / tube), whichever is higher, of each type, size, rating & material wise (such as valves, fittings, pipes, tubes, compression fittings as listed in the list of items of installation standard no. 7-52-3489, 7-52-3490, 7-52-3491, 7-52-1527, 7-52-1523, 7-52-1524, 7-52-4077, 7-52-4078, 7-52-1192, 7-52-1140, 7-52-1103, 7-52-4079 , 7-52-1101, 7-52-1102, 7-52-1159, 7-52-1188 & 7-52-1163) in the overall SOR quantity as per specification as a Mandatory spare. 1266 SS316 Nipple 1/2 TH x TH, SCH. 80S 1267 SS316 Nipple 1 TH x PL, SCH. 40S 1268 SS316 Nipple 1 PL x PL, SCH. 40S 1269 SS316 Equal Tee 1 SW, 3000# 1270 SS316 Elbow 1” SW, 3000# 1271 SS316 Cap 1/2” TH, 3000# 1272 SS316 Cap 1” TH, 3000# 1273 SS316 Coupling full 1” SW, 3000# 1274 SS316 Globe Valve 1 SW, body rating: 800#, end rating: 3000# 1275 JUNCTION BOX INSTALLATION 1276 Installation of weatherproof junction boxes including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG Copper wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings for cable size 12Px0.5/1.0/1.5/2.5 mm² Signal/Alarm/ Control. 1277 Installation of weatherproof three way junction boxes for Power including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG Copper wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings for cable size 2C x 2.5 mm² 1278 LAYING OF CABLES 1279 Laying of instrumentation cables for signal, alarm, shutdown, control and signal cable on ducts, main trays, perforated trays, angle trays, trenches (including opening of cable duct covers if requiredthrough IRCs {Instrument Road Crossings}) including clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire, providing and fixing identifying tags and megger testing but exclusive of supply of cables and erection of ducts, main tray, perforated tray/ angle trays and preparation of cable trench. 1280 Signal / Alarm / Control Cables of cable sizes 1P x 1.5 / 2.5 mm² 1281 Signal/ Alarm/ Control Cables of cable sizes 24C /12P x 1.5/ 2.5mm² 1282 Laying of power cables on ducts, main trays, perforated trays, angle trays, trenches (including through IRCs) including opening of cable duct covers if required clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire providing and fixing of identifying tags and megger testing but exclusive of supply of multi cables and erection of ducts, main tray, perforated tray/ angle tray and preparation of cable trench 1283 For cable size 2C x 2.5 mm² 1284 EARTHING 1285 Supply, laying and termination of both ends of earthing cables from earth grid pit to the DCS/ Local panels/ Barrier earth bus bars in trays/ conduits/ trenches as required. 1286 At both ends of earth grid/ Instruments of copper wire (12 AWG) in trays and conduits as required excluding earth-pit preparation and electrode installation. 1287 PIPING / TUBING / FABRICATION WORK 1288 Fabrication and erection of SS Air lines and fittings including supply/ fabrication/ erection of supports, installation of distribution, pneumatic testing and painting of supports but exclusive of supply of pipe and fittings as per standard 1289 For size 1 1290 Laying of Bare/ PVC covered copper tubes/ SS tubes on perforated trays including clamping, termination at both ends, providing identifying tags at both ends and Air testing, but exclusive of supply of copper/SS tubes, fitting and erection of perforated tray/ angle tray 1291 1/2 / 12 mm O.D . (for SS tubes) 1292 Erection of SS Air distribution manifold and fittingsincludingsupply/ fabrication/ erection of supports, pneumatic testing andpaintingofsupportsbutexclusiveofsupplyofSSAir distribution manifold and fittings 1293 Installation of 6-way Air Manifold (1/2) as per Standard 7-52-1905 1294 Tubing Hook-up of Control valves/ Pneumatic Transmitters etc. with air filter regulator / positioner / solenoid valves / Current to Pneumatic converters etc. as per Standards 1295 as per standard 7-52-3982. 1296 RADIOGRAPHY - CARBON STEEL WELD JOINTS 1297 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Gauges 1298 In Carbon Steel as per Standard 7-52-1103. 1299 In Carbon Steel as per Standard 7-52-4079. 1300 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differrential Pressure Gauge 1301 In Carbon Steel as per standard 7-52-4077. 1302 In Carbon Steel as per standard 7-52-4078. 1303 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Instruments installations 1304 In Carbon Steel as per Standard 7-52-1101. 1305 In Carbon Steel as per Standard 7-52-1159. 1306 In Carbon Steel as per Standard 7-52-1188. 1307 In Carbon Steel as per Standard 7-52-1102. 1308 In Carbon Steel as per Standard 7-52-1163. 1309 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure Instruments 1310 In Carbon Steel as per Standard 7-52-1140. 1311 In Carbon Steel as per Standard 7-52-1192. 1312 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Flow) Instruments 1313 In Carbon Steel as per Standard 7-52-3489. 1314 In Carbon Steel as per Standard 7-52-3490. 1315 In Carbon Steel as per Standard 7-52-3491. 1316 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Level) Instruments 1317 In Carbon Steel as per Standard 7-52-1523. 1318 In Carbon Steel as per Standard7-52-1524. 1319 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Magnetic Level Gauges 1320 In Carbon Steel as per Standard 7-52-1527. 1321 RADIOGRAPHY - CS SPECIAL, ALLOY STEEL, SS 1322 Radiography conforming to the requirements of the Piping Class for all weld joints in Piping of Instrument air supply distribution, In Stainless Steel as per Standard 7-52-1905. 1323 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Instruments installations 1324 In Stainless Steel as per Standard 7-52-1159. 1325 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Flow) Instruments 1326 In Stainless Steel as per Standard 7-52-3490. 1327 Fire protection of instrument cable duct/trays 1328 Supply and erection of fire protection material for instrument cable ducts as per specification enclosed elsewhere with tender 1329 Run of Duct 600mm(W) X 300mm(H) 1330 Supply and erection of fire protection of cable trays as per specification enclosed elsewhere with tender 1331 Run of Tray 100mm (W) X 30mm (H) 1332 Run of Tray 60 mm (W) X 20mm (H) 1333 Run of Tray 150 mm (W) X 75 mm (H) 1334 Run of Tray 300 mm (W) X 75 mm (H) 1335 STRUCTURAL 1336 Supply, Fabrication and erection of Galvanised Iron duct and its supports as per standard. Duct configurations include Duct Equal Tee, Duct Expander Tee, Duct Reducer Tee, Duct Offset Bend, Duct with Reducer, Vertical Plane Tee, Vertical Plane Elbow, Duct Bridge (jumpover), Sleeves. 1337 Run of Duct 1000mm (W) X 400mm (H) 1338 Run of Duct 600mm (W) X 300mm (H) 1339 Run of Duct 800mm (W) X 300mm (H) 1340 Supply and erection of prefabricated FRP perforated trays with covers as per specifications enclosed elsewhere in tenderdocument and its support including tees, bends and elbows 1341 tray of 60 mm (W) X 20 mm (H) 1342 tray of 150 mm (W) X 75 mm (H) 1343 tray of 300 mm (W) X 75 mm (H) 1344 tray of 100 mm (W) X 30 mm (H) 1345 CANOPY FOR INSTRUMENTS AND JUNCTION BOXES 1346 Supply of Prefabricated FRP canopies along with mounting accessories for local instruments, Transmitters, Junction Box etc. for mounting on the stanchion and alignment as per standard 7-52-0105 1347 FRP Canopy (All sides closed) - Field Instruments 1348 FRP Canopy (All Side Closed) - Temperature Transmitter and Loop Powered Indicator 1349 FRP Canopy For Junction Box - Front Side Open 1350 FRP Canopy (All Side Closed) - Guided Wave , Mass Flow Meter 1351 FRP Canopy for RTD / Thermocouple 1352 Erection of Prefabricated FRP canopies for local instruments, Transmitters, Junction Box etc. on the stanchion and alignmentas per standard 7-52-0105 1353 FRP Canopy (All sides closed) - Field Instruments 1354 FRP Canopy (All Side Closed) - Temperature Transmitter and Loop Powered Indicator 1355 FRP Canopy For Junction Box - Front Side Open 1356 FRP Canopy for RTD / Thermocouple 1357 FRP Canopy (All Side Closed) - Radar Level Instruments 1358 GENERAL SITE WORK 1359 Supply of Yoke supports for transmitters/ preamplifiers (wherever applicable) including supply, fabrication and erection of instrument yoke of all types and painting of yoke supports but exclusive of mounting of Instrument on supports. 1360 2 Yoke supports as per standard 7-52-0101 1361 Erection of 2 Yoke supports/ stanchions for Instruments but excluding supply and fabrication of Yoke support. 1362 Erection of2 Yoke supports for instruments excluding supply of Yoke 1363 Supply, fabrication and installation of structural supports with MS channel/angle/plates etc. for supports ofmiscellaneous instruments/cabinets/panels including cutting, welding , bolting, rivetting, groutingincluding supply and installation of installation hardware like anchor bolts/nuts etc., painting of supports including supply of paints as per specification, including all labours and materials and completion of jobs in all aspects as per drawings/directions of Engineer-in-Chargenor paid). 1364 Structural steel ISMC 100 1365 Identification of instrument items wherever required including supply of approved colour of paint/ paints (Fluorescent), painting of tag number (approx 25-50 mm high) on instrument item like transmitter, switches, level gauges, control valves etc. as specified by Engineer-in-Charge. 1366 Identification of instrument items 1367 Supply, Fabrication & Installation of Concrete Pedestal (RCC) for supporting JB/Yoke but exclusive of supply of JB/Yoke as per specifications/drawing attached 1368 Size 500 mm x 500 mm x 600 mm 1369 SITE ACTIVITIES BY MECHANICAL CONTRACTOR 1370 Supply & wrapping of single layer PIR Insulation (Cold conservation type insulation ) with thickness of 50mm for 1/2 impulse lineconsist of insulation blocks fixed with adhesives, joint sealants, protected from moisture/ water ingress by vapour barrier, vapour stop and covered with a weather protection jacket after cleaning the impulse lines of dust, rust, grease in line withJob specification for Insulation of piping & equipment ( B861-000-06-43-IL-S001 ) attached in the tender. The wrapping of the insulation around impulse line shall cover it completely without leaving any gap. Scope of supply & wrapping by Contractor includes all material, tools, tackles & labour etc. to complete the work in all respects. 1371 Supply & wrapping of single layer PIR Insulation (Surface condensation type insulation ) with thickness of 25mm for 1/2 impulse lineconsist of insulation blocks fixed with adhesives, joint sealants, protected from moisture/ water ingress by vapour barrier, vapour stop and covered with a weather protection jacket after cleaning the impulse lines of dust, rust, grease in line withJob specification for Insulation of piping & equipment ( B861-000-06-43-IL-S001 ) attached in the tender. The wrapping of the insulation around impulse line shall cover it completely without leaving any gap. Scope of supply & wrapping by Contractor includes all material, tools, tackles & labour etc. to complete the work in all respects. 1372 Transportation of all types of valves (Including Control Valves, Special Control Valves, Motor Operated Valves, PRDS, Control valves, On-Off/Shutdown valves, Self actuating valves) from Owners storage points to contractors stores/worksite and installation of valvesfor all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. 1373 Inlet Valve size - 12 , Rating - 300# 1374 Inlet Valve size - 1 , Rating - 300# 1375 Inlet Valve size - 1 1/2 , Rating - 300# 1376 Inlet Valve size - 3 , Rating - 300# 1377 Transportation of all types of Safety Valves, Pilot Operated Safety Valves from owners storage point to contractors store/worksite and installation of valves for all ratings including assembly of valves, accessories if any, at alllocations and fixing of gaskets, bolts/nuts wherever required as per drawings, specifications and as per the directions of engineer-in-charge. 1378 Inlet size - 1 , Rating - 150# 1379 Inlet size - 2 , Rating - 150# 1380 Inlet size - 4 , Rating - 150# 1381 Inlet size - 3/4 , Rating - NPT 1382 Impulse line painting (uninsulated) as per painting specification for project 1383 Instrumentation impulse line of size 1/2 for temp. (-)14 to 80 degC 1384 Impulse line painting (insulated) as per EIL painting specification for project. 1385 Impulse line size of 1/2 with material Carbon Steel for temp. (-)45 to 125 degC 1386 ENVIRONMENT 1387 Condensate Water Treatment Plant 1388 CONDENSATE WATER TREATMENT PLANT, WITH COMPLETE ACCESSORIES & AUXILLARIES (As per Document no. B861-000-17-42-SS-1001): The scope of work shall include design, engineering, procurement, fabrication, supply, transport, handling, storage at site, erection, civil, electrical, piping, painting, mechanical and instrumentation works, testing, pre-commissioning, commissioning, trial run and guarantee of condensate water treatment system and handing over of the same to the Owner. 1389 EQUIPMENT - PACKAGE 1390 Design, engineering, procurement of raw materials and bought out components, manufacture, assembly, inspection, testing, painting (both primer and finish coat) , erection, testing &commissioning of following Basket Strainers along with associated equipment/items complete in all respect for efficient & satisfactory operation as per enclosed Scope of Work (Doc no. B861-000-80-42-SOW-3001) & Process data sheets. 1391 BASKET STRAINERS, Tag Nos. 701-STR-1701/1702 1392 BASKET STRAINERS, Tag Nos. 701-STR-1801/1802 1393 BASKET STRAINERS, Tag Nos. 701-STR-1901/1902 1394 BASKET STRAINERS, Tag Nos. 701-STR-2001/2002 1395 BASKET STRAINERS, Tag Nos. 701-STR-2101/2102 1396 Supply and Installation of Wall mounted Split Air Conditioners for Store Officer cabin : Supply of single phase inverter controlled Split Air Conditioner with compatible stabilizer (copper winding) complete with all accessories and fittings, including supply of first fill of refrigerants (non-CFC and eco-friendly), remote control, transportation from vendors works to site, unloading at site, handling, transportation to contractors store and from contractors store to work site, storage at site, assembly at site, installation and other field works including civil-structural works complete in all respect, testing, painting, insulation, commissioning, handing over to client. Split unit shall have wall mounted indoor unit and outside located air cooled condenser (outdoor unit) with insulated refrigerant piping (considering approx 10 m length between indoor and outdoor unit), controls and accessories, electrical and civil works(e.g. civil work related to concealing of refrigerant piping, drain piping to the nearest drain, cabling (considering approx 10 m length between indoor and outdoor unit) of AC units) as required including the structural steel framework, pedestal/bracket to mount the indoor and outdoor units, supports & clamps for refrigerant piping/cables, stabilizer, hold down nuts & bolts, spares for commissioning and start up etc. as per the enclosed Job Specification and other documents referred therein and instruction of engineer-in-charge for each equipment including accessories. 1397 Inverter Type Split Air Conditioner of capacity 1.5 TR having star rating 5 (BEE 5 star rating or equivalent) 1398 EOT CRANE (SAFE AREA APPLICATION) FOR MATERIAL STORE/ WORKSHOP BUILDING :Radio Remote Control(1 Working+ 1 Stand by) Operated-Design, engineering, manufacture, procurement of raw materials and bought out components, supply, fabrication, assembly, shop painting (primer + finish coat), inspection, testing (at manufacturers shop), packing and supply of double girder type EOT Crane including supply of all commissioning spares, special tools and tackles as applicable, mandatory spares, first fill of lubricant, consumables,erection material & documentation, transportation from Vendors works to designated storage site, handling, loading, unloading and storage, complete site works including transportation from storage site to work site, storage & handling at work site, assembly at site, erection installation, testing, touch-up painting, pre commissioning, commissioning, performance guarantee test run including arrangement of test loads, completing thework in all respects and handling over to Client, as per drawing, specifications, scope of work and instructions of engineer in charge and other attachment included in Tender for following EOT Crane.NOTE 1: Span or/and travel length of crane may undergo minor changes of ±0.5 meter during detailed engineering, for which no price & time implication shall be entertained.NOTE 2: Height of lift may undergo minor changes by ±0.5 meter during detailed engineering, for which no price & time implication shall be entertained.NOTE-3: Contractor shall arrange/bring adequate certified test loads during testing at EOT crane location. To and Fro transportation of test loads with cage (including loading, handling, unloading etc.), including taking back of test load after successful performance test from worksite and supply of manpower shall be in scope of Contractor). 1399 1 No. Double Girder E.O.T Crane with Main hook SWL (Safe Working Load) 15 MT , Auxillary hook SWL 3 MT , Span -12.7 m, Long Travel - 30 m , Height of lift - 8 m, M5 duty along with rails, fixtures and other accessories.(Refer Scope of Work , Job Specification & Electrical specifications ) enclosed elsewhere with this tender document). 1400 UNIT RATES FOR E.O.T CRANE FOR ADDITION/DELETION PURPOSE 1401 Unit Rate (ADDITION / DELETION) for ±0.5m in HEIGHT OF LIFT (over & above 0.5 m from specified data) 1402 Unit Rate (ADDITION / DELETION) for ±0.5m in SPAN (over & above 0.5 m from specified data). 1403 Unit Rate (ADDITION / DELETION) for ±0.5m in LONG TRAVEL (over & above 0.5 m from specified data) including rail fixtures. 1404 EQUIPMENT - ROTATING 1405 Handling and transportation of Rotating Equipment & miscellaneous items of equipment package from Owners storage points to work site / contractors stores, assembly of sub-assemblies, field assembly (as applicable) placing the equipment on foundations,(including some amount of cutting, welding & field joints wherever required), levelling, aligning, fixation of foundation bolts, providing (including supply) packing / shim plates (as applicable), including chipping & dressing of foundations, grouting (including supply and application of grout material, equipment base frame filling as per vendor recommendation with specified grout), cleaning and flushing, draining and drying, purging of lines, and providing manpower and tools / equipmentforNDT, testing, carrying out trial and start-up runs and testing under supervision of manufactures / customer personnel, rectifying defects (if any), insulation (as applicable),precommissioning and commissioning (as applicable) and completing the work in all respects as per drawings, job specifications / scope of work and instructions of Engineer-in-charge for each equipment including drivers and accessories, as listed below.NOTE: Scope also includes erection, fabrication, insulation (as applicable), welding & field joints wherever required, installation & NDT of vendor supplied prefabricated spools / commercial length between various skids of an equipment package (payable at the rate provided against piping SOR items). 1406 Pump Packages (all types) with drivers, auxiliaries and accessories. 1407 All Types of Pumps (Electric Motor Driven) along with driver, auxiliaries and accessories (Single Skid). 1408 Chemical Dosing Packages 1409 Skid mounted chemical dosing packages along with all auxiliaries and accessories. 1410 Procurement of Rotating Equipment Packages by Contractor.Engineering and Procurement of Rotating Equipment, handling and transportation of Rotating Equipment & miscellaneous items of equipment package from Owners storage points to work site / contractors stores, assembly of sub-assemblies, field assembly (as applicable) placing the equipment on foundations,(including some amount of cutting, welding & field joints wherever required), levelling, aligning, fixation of foundation bolts, providing (including supply) packing / shim plates (as applicable), including chipping & dressing of foundations, grouting (including supply and application of grout material, equipment base frame filling as per vendor recommendation with specified grout), cleaning and flushing, draining and drying, purging of lines, and providing manpower and tools / equipmentforNDT, testing, carrying out trial and start-up runs and testing under supervision of manufactures / customer personnel, rectifying defects (if any), insulation (as applicable),precommissioning and commissioning (as applicable) and completing the work in all respects as per drawings, job specifications / scope of work and instructions of Engineer-in-charge for each equipment including drivers and accessories, as listed below.NOTE: Scope also includes erection, fabrication, insulation (as applicable), welding & field joints wherever required, installation & NDT of vendor supplied prefabricated spools / commercial length between various skids of an equipment package (payable at the rate provided against piping SOR items). 1411 Diesel Engine based Electric Generator Set Packages with auxiliaries and accessories. 1412 Equipment Tag No. 701-DG-001 as per Document No. B861-000-80-42-SOW-3001 1413 EQUIPMENT - STATIC 1414 STORAGE TANKS 1415 PLATE WORK 1416 Plate work for Fixed Roof Tanks (Cone and Dome roof tanks) and covered Floating Roof tanks except Floating Roof:Procurement of all plates as per specifications, transportation to work site, fabrication and erection of shell, bottom (Sketch plates and annular plates including backing strips), cone roof, Dome roof, compression ring/knuckle plate, plate fabricated wind girders, wind girder opening, bearing plates for pipe supports, datum plates, shell manhole- necks, bolting and cover flanges for shell-man-holes, reinforcement pads for shell manholes, nozzle reinforcing pads, roof manhole-necks, bolting and cover flanges for roof manholes, reinforcing pads for Roof manholes, clean-out door assembly (including davit assembly), gusset- support for wind girders, Sump for drain nozzle, pads for all appurtenances and attachments, fabrication and installation of all items as per drawing, conducting tests such as vacuum test, MP/DP test, pneumatic test, oil penetrant examination, Grouting work (including the supply of grouting material, as required for the tanks installed on ring wall foundation) underneath the Annular/ bottom plateas per the specifications attached, tank hydrotest, etc. for shell, bottom and roof as specified, radiography including supply of films, all heat treatment specified in drawings/ specifications/ codes, preparation of drawings as per specifications, standards and relevant codes and getting the same reviewed by Owner/EIL, providing all temporary structures, clamps, wedges, including arrangement of all materials, consumables, labour, equipment, machinery, tools, tackles etc. to complete the work in all respects as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge.All bolting, gaskets wherever required as per scope of supply and scope of work shall be supplied and installed by Contractor. Spares 10% bolting (min. 2 nos.) and 200% spare gaskets shall be included in Contractors scope. Any other (Commissioning etc.) spares as mentioned in tender specifications shall be also be included in Contractors scope.Quoted price shall be inclusive of supply of all bolts, nuts, gaskets including spares. 1417 IS 2062 Gr. E250 (A, BR, B0, C) 1418 SA 516 Gr. 60/ 70 1419 STRUCTURAL/PIPES 1420 STRUCTURAL/ PLATE WORK :Supply, fabrication, erection, inspection and testing of steel structure for cone roof/ dome roof supporting structure including curb angle, spiral stairway, cage ladder, handrail, top and intermediate platform, grating for stairway steps and platform, rolling ladder including track for floating roof, anchor chairs,name plates, earthing connections, ladder rungs for ladders in covered roof tanks, wind girder fabricated from rolled section, wind girder bracings/ support, external structural supports, supports for shell extension for foam nozzles in case of floating roof tanks, stiffeners for shell extension plate of stairway, ventilation slots and over flow slots for covered floating roof tank including SS wire mesh, preparation of drawings, getting the same reviewed/ approved by owner/ EIL, arrangement of all materials, consumables, labour, equipment/ machinery, tools and tackles required to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor. 1421 Roof structure as per Standard/Drg. 1422 SA 36 1423 IS 2062 1424 SA 516 Gr.60/70 1425 STILL WELLS/ DIP PIPES :Supply, fabrication, erection, inspection and testing ofstill well for gauge hatch, still well for level transmitter/ level switches, still well for temperature element including flanges on all still wells, dip pipes (process / instrumentation), pipe fittings, drilling of holes in still well/ dip pipes, arrangement of all materials, consumables, labour to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor. 1426 SA 333 GR6 1427 SA 106 Gr. B 1428 STRUCTURAL PIPES (CS GALVANISED):Supply, fabrication, erection, inspection and testing of pipe specification for pipe handrails (CS and galvanised), arrangement of all materials, consumables, labour to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor. 1429 PIPES(CS GALVANIZED) 1430 APPURTENANCES 1431 Supply, fabrication, installation, welding, radiography, heat treatment, inspection and testing as required for the following nozzles (reinforcing pads covered under plate work) pipe, nozzle flanges and blind / companion/matching flanges (including davit/ hinge assembly for Man way) wherever shown on drawings and standards along with gaskets and boltings including supply of mandatory spares, conducting air pressure test for reinforcing pads, preparation of drawings, getting the same reviewed by Owner/EIL, arrangement of all materials, consumables, labour to complete the work as per drawings, specifications , standards, codes, scope of work, scope of supply and instructions of Engineer-in- Charge. All internal bolting shall be SS 304 as a minimum and contractor shall include the same in his scope of supply and shall be included in nozzleassembly quoted price. Spare gaskets ( 2 nos.) and 10% spare bolting (minimum 2 nos.) shall be included in Contractors scope of supply and shall be included in nozzle assembly quoted price. 1432 Roof Nozzle 150 Class WNRF Type 1.5 InchSize SA 350 LF2 Material 1433 Roof Nozzle 150 Class WNRF Type 2 InchSize SA 105 Material 1434 Roof Nozzle 150 Class WNRF Type 8 InchSize SA 105 Material 1435 Shell Nozzle 150 Class WNRF Type 2 InchSize SA 105 Material 1436 Shell Nozzle 150 Class WNRF Type 4 InchSize SA 105 Material 1437 Shell Nozzle 150 Class WNRF Type 6 InchSize SA 105 Material 1438 Roof Nozzle 150 Class WNRF Type 2 InchSize SA 350 LF2 Material 1439 Roof Nozzle 150 Class WNRF Type 3 InchSize SA 350 LF2 Material 1440 Roof Nozzle 300 Class WNRF Type 3 InchSize SA 350 LF2 Material 1441 Roof Nozzle 150 Class WNRF Type 6 InchSize SA 350 LF2 Material 1442 Roof Nozzle 150 Class WNRF Type 8 InchSize SA 350 LF2 Material 1443 Shell Nozzle 150 Class WNRF Type 2 InchSize SA 350 LF2 Material 1444 Shell Nozzle 150 Class WNRF Type 3 InchSize SA 350 LF2 Material 1445 GOOSE NECK VENT WITH WIRE MESH:supply of materials,fabrication, installation,welding, radiography, heat treatment, inspection and testing as required for the (reinforcement pads covered under Plate work) goose neck vent with wire mesh (SS 304 as minimum) for the following vent materials. 1446 Size 2 InchMaterial SA 106 Gr. B 1447 INSTRUMENTS 1448 Transportation of following instruments from Owner/Storage yard/stores and installation of the same in position as per instructions of Engineer-in-Charge/Supplier. (Contractor shall take care so that no damage occurs while handling these instruments). 1449 Pressure Transmitter Instrument 1450 Level Transmitter Instrument 1451 Breather Valve Instrument 1452 Emergency Vent Instrument 1453 Temperature Gauge Instrument 1454 CALIBRATIONCarrying out calibration of tanks including supply of strapping tapes, scaffolding wherever required, arranging the visit of competent authority, all accessories, labour, preparation and submission of calibration charts duly approved by Competent authority etc. and complete the work in all respect as per Codes, specifications, standards and instructions of Engineer-in-Charge 1455 Diameter (Meters) : upto 10 Height (Meters) : upto10 1456 Diameter (Meters) : > 10 to 25 Height (Meters) : > 10 1457 DESIGN, SUPPLY & INSTALLATION OF EMERGENCY VENT (Lumpsum)Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, delivery, documentation as per the enclosed M/s EIL specification and installation of Emergency Vent etc. to the satisfaction of the Engineer- in Charge. 1458 DESIGN, SUPPLY & INSTALLATION OF BREATHER VALVE (Lumpsum):Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, delivery, documentation as per the enclosed EIL specification and installation of breather valves etc. to the satisfaction of the Engineer-in-charge. 1459 Gauge Hatch with Cover:Supply & installation of Gauge Hatch with Cover for the tankages mentioned in the data sheets/ drawings/ specifications as per the Specifications & Standards attached with the tender. Arrangement of machinery, tools & tackles, labour etc. to accomplish the installation of the same shall also be in the scope of Contractor. The following Gauge Hatch with cover are required. 1460 Material: CS 1461 PAINTING OF TANKS 1462 PAINTING FOR CARBON STEEL AND LOW ALLOY STEEL TANKS 1463 ExternalSurfaces (except underside of bottom plate): Surfacepreparation to SSPC-SP-10,applicationofprimerandpaint onallexternalsurfacesoftanksincluding insulatedtanks i.e.externalshell,windgirders,appurtenances,rooftops including top sideoffloatingroofofopentanksaswellascovered floatingrooftanks, external roof supporting structure,associatedstructuralsteelworks,ladders,walkways, platforms,handrails,spiralstairway,rollingladderandtrack, internal surface of shell above maximum liquid level exposed to atmosphere for open top or floating roof tanks asper painting system defined below and otherrequirementsasspecifiedinrespectiveEngg.datasheets, stencillingtankno., capacity, name of storedproduct,paintingEmblem aspertheattachedsample,includingsupply of metallicandnon-metallic materials,primerandpaintofapprovedquality,providingscaffolding, labour,equipment,consumables,etc.tocompletetheworkinall respect asperapplicable standard specifications,standardsattached elsewhere in the tender document andinstructionsofEngineer- in-Charge. All materials shall be supplied by Contractor. 1464 Design Temperature Range: (-) 14 °CTo 80 °CPrimer: 1coat of F-9 @ 65-75μ DFT/coat + 1coat of P-6 @ 40μ DFT/ coat Finish Paint: 2 coats of F-6B @ 100μ DFT /coat + 1 coat of F-2 @ 40μ DFT/ coat Remarks: Total DFT in Microns (minimum) = 345-355 1465 ExternalSurfaces (underside of bottom plate): Surfacepreparation to SSPC-SP-10,applicationofprimerandpaint onunderside of bottom plate (soil side) asper painting system defined below and otherrequirementsasspecifiedinrespectiveEngg.datasheets includingsupplyofmetallicandnon-metallic materials,primerandpaintofapprovedquality,labour,equipment,consumables,etc.tocompletetheworkinall respect,asperapplicable standard specifications,standardsattached elsewhere in the tender document andinstructionsofEngineer- in-Charge. All materials shall be supplied by Contractor. 1466 Design Temperature range (-) 14°C to 80°C, Primer : 1 coat of F-9@ 65-75µ DFT/coat,Finish Paint : 3 coats of F-7 @ 100µ DFT /coat. 1467 Design Temperature Range: -29 °CTo 400 °CPrimer: 1 coat of F-16 @125 micron Finish Paint: 1 coat of F-16 @125 micron Remarks: total DFT : 250-300 micron 1468 InternalSurfaces:Surfacepreparation to SSPC-SP-10,applicationofprimerandpaint oninternalsurfaceofbottomplate,shell full height,internal surfacesofcone/dome roof,roofstructure,oil side surfacesofpontoons & deck platesandoil side surfaces of doubledecks,internalladder,structuralsteel, internalsupportandinternalaccessories(exceptheatingcoil)asper painting system defined below and requirementsasgiven in the respective engg.datasheets. Supply of metallic and non-metallic materials, labour, primer andpaint of approved quality, equipment, consumables,etc. to complete the work in allrespect, as per applicable specifications, standardsattached elsewhere in the tender document and instructions of Engineer- in-Charge. All materials shall be supplied by Contractor. 1469 Design Temperature Range: -14 °CTo 60 °CPrimer: 1 Coat of F-6A@100 µ DFT/coat Finish Paint 2 Coats of F-6A@ 100µ DFT/Coat(2x100=200) Remarks: - 1470 Design Temperature Range: - °CTo - °CPrimer: - Finish Paint 3 coats of vinylchloride co- polymer @ 75µ/Coat; (3x75=225) Remarks: - 1471 EQUIPMENT ERECTION 1472 TOUCH-UP PAINT APPLICATION (UNINSULATED EQUIPMENT) FOR CS VESSEL 1473 Application of field primers and finish paint(Supply by Others) on C.S vessels, PHE and other equipment, including rubdown and touch up of shop primer (primer as per applicable specification) wherever required as per attached specification, providing scaffolding for all heights, labour, material, tools and tackles, consumables, supervision etc. to complete the work in all respect as per specifications, drawings, equipment details for painting and direction of Engineer in-Charge for all type of uninsulated equipment. The surface area is as per respective temperature ranges given in applicable specification. Note: Surface preparation, primer and finish paint already carried out by equipment supplier. 1474 EQUIPMENT ERECTION:Transportation of reactors, columns, vessels, silencers, heat exchangers (shell and tube, plate fin, plate) and electric heater etc. from owners storage point to work site, assembly of parts, subassemblies, erection at all elevations, aligning, verticality checking, grouting, tightening of foundation bolts, welding of washer on anchor chairs, erection of wooden pillow for cold equipments, stacking of multi-tier exchanger(which are stored in unstacked condition), arranging hooks for test ring/ test flanges in heat exchangers, installation of demister, internal gratings, distributor, pipe davit, installation of mixer/agitator,cleaning and flushing by water, draining, drying by compressed air, arranging all tools, tackles, machinery, consumables, transportation equipment, erection equipment, instruments, labour, ancillary, etc. to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. 1475 Equipment weighing less than 30 MT but 10 MT and above 1476 TOUCH-UP PAINT APPLICATION (INSULATED EQUIPMENT) FOR CS VESSEL 1477 Application of field primers and finish paint(Supply by Others) on C.S vessels, PHE and other equipment, including rubdown and touch up of shop primer (primer as per applicable specification) wherever required, as per attached specification, providing scaffolding for all heights, labour, materials, tools and tackles, consumables and supervision etc. to complete the work in all respect as per specifications, drawings, equipment details for painting and direction of Engineer in-Charge. The surface area is as per respective temperature ranges given in applicable specification. Note: Surface preparation, primer and finish paint shall be provided by equipment supplier. 1478 EQUIPMENT UNLOADING: Unloading of Equipment from trailer at designated receiving point, Transportation of the same and handling over to owner at designated storage point for the following as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. 1479 Equipment weighing less than 50 MT but 30 MT and Above 1480 Equipment weighing less than 30 MT but 10 MT and above 1481 LETTERING AND STENCILING:Surface preparation, supply and application of primer and paint on insulated and uninsulated equipment for lettering, stenciling on vessels, columns, drums, for the purposes of identification (Equipment Name, Equipment Number & Service Description) as per applicable painting specification enclosed elsewhere in the tender document, arranging scaffolding for all heights, labour, materials, tools, tackles, supervision etc. to complete the work as per specifications and instructions of Engineer-in- Charge. 1482 ERECTION OF DRESSED-UP EQUIPMENT:Transportation of columns and vessels from owners storage point to work site, dressing up of the column/vessel by contractor , assembly of parts, subassemblies, erection at all elevations, aligning, verticality checking, grouting, tightening of foundation bolts, welding of washer on anchor chairs,arranging all tools, tackles, machinery, consumables,erection of completely dressed-up equipment, & arranging allinstruments, labour, ancillary, etc to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge.Dressing up of column(As applicable as per the requirement of the tender): Supply/Application/installation of insulation, installation of ladders and platforms, installation of piping spool and support (wherever applicable), installation of demister, internal gratings, distributor, pipe davit etc on the Column/Vessel, cleaning and flushing by water, draining, drying by compressed air etc to complete the job in all respects as per the requirements of the specifications & standards attached else where in the tender. 1483 Equipment(Dressed-up) weighing less than 50 MT but 30 MT and Above 1484 ERECTION OF BURIED EQUIPMENT : Transportation of vessels from Owners storage point to worksite, repair/ touch up of finish paint, arrangement of all accessories, equipments, labour etc., placing/erection of vessel in trenches/pits including assembly of parts, subassemblies, aligning, verticality checking, grouting, tightening of foundation bolts,arranging all tools, tackles, machinery, consumables etc to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. 1485 Equipment weighing less than 30 MT but 10 MT and Above 1486 WELDING & NDT OF CUT NOZZLES / SUMP / BOOT OF BURRIED VESSELS:Assembly of cut nozzles/Sump/Boot(as shown in Respective Engg. Data Sheet), vertically checking, alignment, Welding of cut nozzles , NDT such as 100% radiography ,UT , surface preparation of the weld seam portion, application of primer, painting, arranging all tools and tackles, machinery. Consumables, transportation/handling of equipment, labour etc to complete the work in all respects as per drawings & instruction of Engineer-in charge. 1487 MOC : Carbon Steel ,Nozzle size : 2 1488 MOC : Carbon Steel ,Nozzle size : 3 1489 MOC : Carbon Steel ,Nozzle size : 6 1490 MOC : Carbon Steel ,Nozzle size : 8 1491 MOC : Carbon Steel ,Nozzle size : 20 1492 MOC : Carbon Steel ,Nozzle size : 24 1493 EQUIPMENT INSULATION 1494 COLD INSULATION: Providing cold insulation including supply of all insulating andanciliarymaterial,protectivecovering,consumablesand othernecessarymaterials,testingofthematerialasrequiredincluding transportationofthematerialstoworksites,applyinginsulationon surfacesasspecified,includingallpreparatoryworksthereon,allbinding, tying,lacing,stitchingand/orotherwisesecuring,providingvapour barrier,finishingwithplain/corrugatedsheetcladdingorasspecified, providingbolts,rivets,providing vapour stop etc.arranging necessaryscaffolding,alltoolsand tackles,equipment,apparatusetc.labourandsupervisionandcompleting theworkinallrespectatallheightsasperdrawings,specificationsand instructionsofEngineer-in-Charge. 1495 Shells of vertical vessels, columns, exchangers, reactors, silencers etc.Surface material:CS/AS. Insulation type:Ic (Polyurethane foam). Service: Other than LNG. 1496 Insulation Thickness: 50mm 1497 Shells and heads of horizontal vessels, columns, reactors, exchangers, silencers etc and heads of above mentioned vertical equipments. Surface material: CS/AS. Insulation type:Ic (Polyurethane foam). Service: Other than LNG. 1498 Insulation Thickness: 50mm 1499 STRUCTURAL 1500 EARTH WORK (REFER SPECIFICATION NO. 6-68-0003) 1501 Earthwork excavation in soil 1502 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1503 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 1.5m and upto and inclusive of 3.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1504 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 3.0m and upto & inclusive of 4.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1505 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 4.5m and upto & inclusive of 6.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1506 SHORING AND STRUTTING 1507 Providing and installing approved type of SHORING AND STRUTTING by open timbering method for all depths to retain earth including dismantling and removal of the same etc. from site after completion of work etc. all complete as directed. 1508 Providing and installing approved type of SHORING AND STRUTTING by close timbering method for all depths to retain earth including dismantling and removal of the same etc. from site after completion of work etc. all complete as directed. 1509 Backfilling after execution of work 1510 BACKFILLING after execution of the WORK to proper grade and level with selected materials from available excavated soil from spoil heaps within a LEAD OF 100M, including re- excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 Cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete. 1511 BACKFILLING after execution of the WORK to proper grade and level with selected materials from available excavated soil from spoil heaps beyond a LEAD OF 100M AND UPTO & INCLUSIVE OF 500M including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 Cms. watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete. 1512 Transporting & Disposing the SURPLUS EARTH ANDDEBRIS 1513 Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 100M AND UPTO 1KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids). 1514 Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 1.0KM AND UPTO & INCLUSIVE OF 3.0KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids). 1515 PLAIN & REINFORCED CEMENT CONCRETE: (REFER SPECIFICATION NO. 6-68-0004) 1516 PCC - Non FIM Items 1517 Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 Cement: 5 Coarse Sand: 10 Crushed Stone Aggregates/Gravels) with 40mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1518 Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M20 with 20mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1519 RCC Substrutures - Non FIM Items 1520 Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. foundations, raft, beams, slabs, pile caps, retaining walls, dyke walls, jambs, counterforts, buttresses, pedestals, pipe sleepers, columns, suspended floors, staircases, landings, steps, brackets etc., including equipment/ machine foundations & pedestals viz. compressors, ID & FD fans, pumps, generators, crushers, mills, etc., (including single pour concreting as specified on the drawing), applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1521 Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. trenches, culverts, manholes, pipe encasement, catchpits, drains, pits, etc., applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1522 RCC Superstructures - Non FIM Items 1523 Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, window sills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/ machine foundations, ramps etc. (including single pour concreting as specified on the drawing), providing cement wash (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING AND SPECIFIED ADMIXTURES) FOR ALL HEIGHTS UPTO & INCLUSIVE OF 20 m ABOVE PLINTH LEVEL in any shape, position, thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1524 HYD Bars / MS Bars - Non FIM Items 1525 Supplying and placing in position HIGH YEILD-STRENGTH DEFORMED STEEL BARS REINFORCEMENT of Grade Fe500D (TMT) conforming to IS:1786, for RCC work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with 18 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. 1526 Centering and Shuttering - Non FIM Items 1527 Providing and fixing CENTERING AND SHUTTERING in foundations, footings,raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/ silos/ shafts/ hoppers/liquid storage structures etc. for all depths below and upto & inclusive of plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1528 Providing and fixing CENTERING AND SHUTTERING in superstrctures in retaining walls, jambs, counter-forts, buttresses, equipment/ machine foundations, abutments,columns, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/ bunkers/ silos/ shafts/ hoppers/ liquid storage structures etc. for all heights above plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1529 Providing and fixing CENTERING AND SHUTTERING for CURVED SHUTTERING in foundations in all types of Structures such as Chimneys/ Shafts/ Silos/ tunnels/ bunkers/ hoppers/ liquid storage structures/ domes/ ring wall for tanks, etc. for all depths below and upto & inclusive of plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1530 Providing and fixing CENTERING AND SHUTTERING for CURVED SHUTTERING in superstructures in all types of Structures such as Chimneys/Shafts/Silos/ tunnels/bunkers/hoppers /liquid storage structures/ domes etc. for all heights above plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1531 Fixing Re-bars in already cast concrete - Non FIM Items 1532 Designing, supplying and fixing rebars in already cast concrete, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of approved make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. 16 mm & 20 mm of Grade Fe500D (conforming to IS:1786), DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturers recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE EXCLUDING REINFORCEMENT BARS. 1533 CONCRETE FOR LIQUID RETAINING/LEAK PROOF STRUCTURES (REFER SPECIFICATION NO.6-68-0005 1534 RCC- Non FIM Items 1535 Providing and laying Leak Proof Reinforced Cement Concrete of GRADE M-30 (minimum Cement content shall be as per EIL Specifications) with 20 mm and down size graded crushed stone aggregates/ gravel at all positions and in any shape and thickness, in SUB-STRUCTURE, leaving pockets, recesses, vibrating, tamping, curing, testing (for leak-proofness) and rendering (if required to give smooth and even surface) in foundations, walls , beams, buttresses, columns, piers, slabs, tunnels, basements, storage bins, reservoirs etc. including cement wash (if no other surface application is specified) but excluding the cost of Reinforcement, Shuttering and specified admixtures, all complete as specified and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR. 1536 Water Proofing Comp. - Non FIM Items 1537 Supplying and mixing of approved brand of integral WATER PROOFING COMPOUND in cement concrete, cement mortar etc. as per manufacturers specifications or 1% by weight of cement (whichever is minimum), to make it leak proof/ water tight etc. all complete as specified and directed. 1538 PVC Water bars - Non FIM Items 1539 Supplying and fixing in position 230mm wide x 5mm thick approved PVC WATER STOPS as per manufacturers specifications in R.C.C. Structures including cutting, fixing, jointing by vulcanising etc. all complete as shown specified and directed. 1540 Separation Layer - NonFIM Item 1541 Supplying and laying separating layer of approved polythylene sheet of mass 1 kg/sqm (minimum) in between base slab and the layer of lean concrete, including cleaning, preparing of surfaces, etc., all complete and as directed by the engineer-in-charge. 1542 STRUCTURAL STEEL WORKSSPEC NO. 6-68-0006 1543 General Steel Works - FIM Items 1544 Transporting from storage yard (or any other location as specified by engineer-in-charge), Storing, Assembling and Erecting in position and testing/ examining, bolted and/ or welded, already Fabricated STRUCTURAL STEEL (of any Grade)at all locations and levels UPTO & INCLUSIVE OF 20 m ABOVE HPP/ FGL, including all builtup sections/ compound sections made out of rolled/ hollow sections and/or plates/ bent plates in all types of structural frameworks, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified etc., all complete. ALREADY FABRICATED STRUCTURAL STEEL SHALL (WITH CONNECTION BOLTS) BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTORS SCOPE. 1545 General Steel Works - Non FIM Items 1546 Supplying, transporting, storing, fabricating & erecting in position and testing/ examining bolted and/ or welded STRUCTURAL STEEL WORKS of Grade E350BR / E350B0 (conforming to IS:2062) at all locations and levels UPTO & INCLUSIVE OF 20 m ABOVE HPP/ FGL, including all builtup sections/ compound sections made out of rolled sections and/ or plates/ bent plates in all types of structural frameworks, floor beams, stairs, or any other structural items or accessories to support equipments, piping, conveyor galleries, towers, masts, etc., but excluding silos, bunkers, hoppers, etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings, preparing the surface for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per jOb Specification No. B861-000-06-42-PLS-01 after fabrication etc., all complete. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. 1547 Painting - Non FIM Items 1548 Supplying and applying FIELD PAINT SYSTEM of approved quality and shade as per Sl. No. 5.2 of Table 5.0 of JOB Specification No. B861-000-06-42-PLS-01 over the coat of shop primer already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat as per Sl. No. 3.1 of Table 3.0 of JOB Specification No. B861-000-06-42-PLS-01 for steel structures (excluding ladders, spiral stairways & hand rails) at all location & levels, all complete as specified, in OFFISTE (COASTAL) areas as well as UNIT (INLAND & COASTAL) areas. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. (Unit rate based on Structural steel weight). 1549 Supplying and applying COATING (Post-erection/ Field) of approved quality and shade as per Sl. No. 4.1 of Table 4.0 of JOB Specification No. B861-000-06-42-PLS-01 for painting over the coat of shop primer & galvanization already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat, for LADDERS, SPIRAL STAIRWAYS & HAND RAILS at all location & levels, all complete as specified. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. (Unit rate based on weight of steel). 1550 STRUCTURAL STEEL WORKS (TUBULAR/HOLLOW SECTION) (REFER SPECIFICATION NO.6-68-0007) 1551 Yst310 IS 4923 1552 Supplying, transporting, storing, fabricating, erecting in position & testing/examining at all locations and levels, bolted and/or welded STRUCTURAL STEEL WORKS of all types using COLD FORMED (RECTANGULAR/SQUARE) HOLLOW SECTIONS conforming to IS: 4923, Grade Yst-310 of approved make in all type of trusses, purlins, girders, side rails, columns, runners, beams, ties, portals, framework, bracing, brackets, sag rods etc. including all handling straightening/ bending if required, cutting to required size & shape, edge preparation, welding & bolting of joints, providing and fixing end caps and plugging holes, fixing in line and level with necessary temporary staging and removal of the same after erection, grouting with Ordinary/ premix free flow Non- Shrink Grout as specified, preparation and submission of detailed fabrication drawings, preparing the exposed surfaces for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per Job Specification No. B861-000-06-42-PLS-01. all complete as specified and directed (SUPPLY OF ALL MATERIALS INCLUDING PLATES IN CONTRACTORS SCOPE) 1553 MISCELLANEOUS STEEL WORKS SPECIFICATIONS NO. 6-68-0008 1554 Anchor Bolts - Non FIM Items 1555 Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature including nuts, washers, anchor plates, pipe sleeves etc. in foundations, columns, pedestals, slabs, beams, walls etc. or any other place as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading, welding, providing necessary templates and auxiliary dummy structures, if any, necessary tying and welding with reinforcement, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as specified and directed.(SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1556 MS Metal Inserts - Non FIM Items 1557 Supplying, transporting, storing, fabricating and fixing in position M.S. METAL INSERT (with lugs) of any shape made out of flats, plates, rolled sections, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/ any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxiliary dummy structures to support the heavy inserts, painting exposed surfaces with a coat of primer as per EIL Specification No. 6-79-0020 (or as per Job Specification wherever applicable), etc. all complete for all depths and heights as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1558 GI Pipe Sleeves - Non FIM Items 1559 Supplying, fabricating and fixing in position G.I. PIPE SLEEVES of all diameters including providing necessary staging, cutting, straightening if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxiliary dummy structures to support heavy sleeves etc. all complete for all depths and heights as specified and directed. 1560 MS Chequered Plates - Non FIM Items 1561 Supplying, fabricating and erecting in position at all levels and locations bolted, screwed and/or welded M.S. CHEQUERED PLATES of any thickness in walkways, platforms, stair treads, any other place as directed etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting and applying shop primer as per EIL Specification No. 6-79-0020 (or Job Specification, wherever applicable) after fabrication etc. all complete as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1562 MS Grating Cat. A,B - Non FIM Items 1563 Transporting from storage yard (or any other location as specified by engineer-incharge), Storing, Assembling and Erecting in position and testing/ examining, bolted and/ or welded, already Fabricated Grating for platforms etc., including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening, making the edges smooth, removing the burrs (if required), fixing, tack welding, all complete as specified and directed ALREADY FABRICATED GRATING (WITH CONNECTION BOLTS/CLAMPS) SHALL BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTORS SCOPE). 1564 Supplying, fabricating and erecting in position at all levels and locations ELECTROFORGED HOT-DIP GALVANISED GRATING (purchased from approved manufacturer by the Contractor) conforming to EIL Standard No. 7-68-0697 (in walkways, platforms, stair treads etc.) including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing with manufacturers supplied Hot-dip galvanised clamps, preparation and submission of fabrication drawings, all complete as specified and directed. SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE. 1565 Making openings in galvanized grating for pipes / ducts etc., at all levels and at at all locations by cutting the existing grating and providing 50x6 galvanised flat as toe protection for the openings by welding and application of galvanized paint as per EIL Standard No. 7-68-0697, all complete. Payment shall be made as per number of openings. 1566 MS Rungs - Non FIM Items 1567 Supplying, fabricating, fixing and keeping in position M.S. RUNGS in R.C.C. works at all depths and heights including handling, transporting the steel to site workshop and site of work, straightening, if required, cutting, bending to shape, necessary tying and welding with reinforcement, adjustment of shuttering, cleaning, surface preparation, shop primer as per EIL Spec. 6-79-0020 (or Job Specification, wherever applicable)and two coats of anticorrosive paint of approved quality on the exposed portion of rungs etc. all complete as specified and directed (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1568 Hand Railing 1000mm - Non FIM Items 1569 Supplying, fabricating and fixing in position at all locations 1000mm high INCLINED HAND RAILING (for staircases) consisting of top rail, mid rail and vertical posts (Maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade M.S. Tubes conforming to IS:1239 including straightening if required, cutting, bending, welding, bolting, grouting with ordinary grout, cleaning, surface preparation, hot-dip galvanising (80-85 micron as per IS:4759, IS:2629, IS: 4736, IS:2633), shop primer (1 coat of P6 of 40 micron) as per Sl. No. 4.1 of Table 4.0 of JOB SPEC. B861-000-06-42-PLS-01 preparation and submission of fabrication drawings etc. all complete as specified, shown and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). (Complete handrail work shall be measured as length of top rail only and not length of each element fixed). 1570 Supplying, fabricating and fixing in position at all locations 1000mm high HORIZONTAL HAND RAILING (for platforms, walkways, etc. or any other location as directed) consisting of top rail, mid rail and vertical posts (Maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade MS Tubes conforming to IS:1239 and 100x5 MS Toe Plate confirming to IS:2062 (Grade A/B), including straightening if required, cutting, bending, welding, bolting, grouting with ordinary grout, cleaning, surface preparation, hot-dip galvanising (80-85 micron as per IS:4759, IS:2629, IS: 4736, IS:2633), shop primer (1 coat of P6 of 40 micron) as per Sl. No. 4.1 of Table 4.0 of JOB SPEC. B861-000-06-42-PLS-01, preparation and submission of fabrication drawings etc. all complete as specified, shown and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). (Complete handrail work shall be measured as length of top rail only and not length of each element fixed). 1571 Transporting from storage yard (or any other location as specified by engineer-incharge), Storing, Assembling and Erecting in position and testing/ examining, bolted and/ or welded, already Fabricated HAND RAILING for platforms etc. including straightening, cutting, bending (if required) welding, bolting, grouting with ordinary grout, all complete as specified and directed. ALREADY FABRICATED HANDRAILING (WITH CONNECTION BOLTS) SHALL BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTORS SCOPE. (Complete handrail workshall be measured as length of top rail only and not length of each element fixed) 1572 Mechanical Anchor fastners - Non FIM Items 1573 Supplying, handling, transporting to site of work and fixing approved MECHANICAL ANCHOR FASTENERS M.S. bolts of Grade 5.8 or more, GALVANIZED with minimum thickness of 5 microns (approved for use in cracked concrete), of 12mm dia at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush, and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1574 Supplying, handling, transporting to site of work and fixing approved MECHANICAL ANCHOR FASTENERS M.S. bolts of Grade 5.8 or more, GALVANIZED with minimum thickness of 5 microns (approved for use in cracked concrete), of 16mm dia at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush, and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1575 Chemical Anchor Fastner 1576 Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be usedwith the help of dispenser, of 12mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1577 Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be usedwith the help of dispenser, of 16mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size., testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1578 Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete),packed in flexible chemical foil or dual foil type, to be usedwith the help of dispenser, of 20mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size., testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1579 Threaded bolts for equipment fixing-Non FIM 1580 Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED BOLTS of Grade C property class 4.8 as per IS:1363 (part 2) of all diameters and length including nuts, washers for supporting equipment on steel structure as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading etc. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1581 BRICK MASONRY (REFER SPECIFICATION NO.6-68-0009) 1582 CLASS 5.0at all depths -Non FIM Items 1583 Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 5.0 in cement mortar 1:6 (1 Cement : 6 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all depths below plinth level including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1584 Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 5.0 in cement mortar 1:6 (1 Cement : 6 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all heights above plinth level including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1585 HALF BRICK MASONARYwith bricks of CLASS 5.0-Non FIM Items 1586 Providing and laying HALF BRICK MASONRY with bricks of CLASS 5.0 in cement mortar 1:4 (1 Cement : 4 Sand)in any shape, including the cost of materials, labour, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing openings of any shape & size, raking out the joints, supplying and placing 2 Nos. 6mm dia. M.S. Bars at every fourth course, sealing the gap between masonry and soffit of beam/slab, embedding the fittings and fixtures, curing etc. all complete as per specification. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR. 1587 DEMOLISHING AND DISMANTLING (REFER SPEC NO. 6-68-0012) 1588 Brickwork - Non FIM Items 1589 Demolishing BRICKWORK (taking all necessary safety precautions) for all depths below plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation & backfilling shall be paid separately under relevant items). 1590 Demolishing BRICKWORK (taking all necessary safety precautions) for all heights above plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. 1591 RCC - Non FIM Items 1592 Demolishing RCC WORK (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation & backfilling shall be paid separately under relevant items). 1593 Demolishing RCC WORK (taking all necessary safety precautions) for all heights above plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. 1594 Chipping of RCC WORK (taking all necessary safety precautions) by CHISELLING, upto & inclusive of 25mm thickness including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, lapping/welding of reinforcement bars as per drawings, disposal of the unserviceable material to spoil heaps anywhere within the plant boundary, all complete at all heights and depths, as specified and directed. (Excavation and backfilling shall be paid separately under relevant items). 1595 Cutting/ Dismantling RCC work in pavement, slabs, beams, columns, etc upto a depth of 450 mm by using vibration-less spark-free Diamond Saw Cutter of make HILTI (or equivalent) at all depths & heights, in hazardous areas within process units & offsite which are fire prone due to presence of hydrocarbon vapours etc. taking elaborate precautions for dismantling as per fire permit, clearance etc. and work is to be done with extreme caution. The work item includes cost of all necessary accessories, tools & tacklesincluding diamond saw cutter, disposal of RCC Debris upto lead of 100 m& for all lifts (taking all safety precautions) including cutting reinforcement bars, embedded structural steel members, with necessary scaffolding, propping and underpinning etc. for all elevations with all labour and materials, all complete as per drawings, specifications and directions of the Engineer-in-charge. Payment will be made per sq.m.of cross-sectional cut area. Contractor to submit dismantling plan prior to start of dismantling. Dismantling shall be planned in such a way that each cut piece shall weigh not less than 1.6 MT. 1596 Cutting/ Dismantling of RCC block foundations, raft foundations, pile caps, mass concrete, equipment foundations etc. by using vibration-less spark-free Diamond Wire Saw Cutter of make HILTI (or equivalent) at all depths & heights, in hazardous areas within process units & offsite which are fire prone due to presence of hydrocarbon vapours etc. taking elaborate precautions for dismantling as per fire permit, clearance etc. and work is to be done with extreme caution. The work item includes cost of all necessary accessories, tools & tacklesincluding diamond saw cutter , disposal of RCC Debris upto lead of 100 m& for all lifts (taking all safety precautions) including cutting reinforcement bars, embedded structural steel members, with necessary scaffolding, propping and underpinning etc. for all elevations with all labour and materials complete as per drawings, specificationsand directions of the Engineer-in-charge. Payment will be made per sq.m.of cross-sectional cut area. Contractor to submit dismantling plan prior to start of dismantling. Dismantling shall be planned in such a way that each cut piece shall weigh not less than 1.6 MT. 1597 Pockets - Non FIM Items 1598 Making POCKETS/HOLES of sizes upto & inclusive of 200 x200x500mm in RCC/PCC works (taking all necessary safety precautions) by chiselling/drilling, including supply of all tools & tackles, necessary scaffolding etc. cutting of reinforcement bars, cleaning the pockets of all debris, disposal of the unserviceable material to spoil heaps anywhere within the plant boundary all complete at all heights & depths as specified and directed. 1599 PCC _ Non FIM Items 1600 Demolishing PLAIN CEMENT CONCRETE work (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc. disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation and backfilling shall be paid separately under relevant items) 1601 Demolishing PLAIN CEMENT CONCRETE work (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc. stacking of all the demolished concrete material at a designated location within the complex limits, all complete as per specifications and directions of Engineer-in-Charge for further processing in mechanical crushers for generating RA/ RCA as per the specifications. (Excavation & backfilling shall be paid separately under relevant items). 1602 Steelwork - Non FIM Items 1603 Dismantling bolted/rivetted/welded STRUCTURAL STEEL WORK of all descriptions (taking all necessary safety precautions), including supply of all tools and tackles, consumables, necessary scaffolding etc., providing temporary bracings as required, cutting (by flame or saw) gusset plates, bolts, nuts, weldings etc., transporting and stacking of the serviceable materials, cleaning the site of work of all unserviceable materials for disposal to spoil heaps anywhere within the plant boundary, all complete at all depths and heights, as specified and directed. 1604 MISCELLANEOUS ITEMS (REFER SPECIFICATION NO. 6-68-0013) 1605 Anticorrosive - Non FIM Items 1606 Providing and laying 50mm thick ANTI-CORROSIVE LAYER under steel storage tanks with screened dry coarse sand mixed with A90 grade bitumen conforming to IS:73 including mixing in drum, heating to the required temperature, with 3% kerosene if required, tamping, dressing to the required slopes to form hard mass of specified compacted thickness etc. all complete as directed. 1607 Sand Filling - Non FIM Items 1608 Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts, including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm, watering, ramming, compacting with mechanical compactors and/or other equipment to the specified levels to achieve 85% relative density as per IS:2720 Part XIV, including preparation of subgrade to the required slope, providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge. The rates shall be inclusive of the cost of all labour, material, equipments etc. all complete . 1609 BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE 1610 Supplying and mixing of approved brand of BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE (confirming to EIL Specification No. 6-68-0017) in concrete as per manufacturers specification for protection of reinforcement against corrosion. Supply of admixture in Contractors scope. 1611 BONDING FRESH CONCRETE TO OLD CONCRETE BY EPOXY RESIN BONDING SYSTEM (REFER SPECIFICATION NO. 6-68-0056) 1612 Epoxy Resin - non FIM Items 1613 Providing and applying approved EPOXY RESIN (prepared as per manufacturers recommendation) for bonding of fresh concrete to old concrete in all types of structure at all depths and heights including cleaning of concrete surface, removing of all loose concrete pieces, making rough by chiselling, taking off the skin of concrete, application of Epoxy Resin System by spraying, necessary working platforms, props, scaffolding and other safety measures, removal of same after completion etc. all complete as specified and directed. (Excavation, backfilling, removal of surplus earth, keeping pit dry by pumping/bailing subsoil water shall be paid separately under relevant items). 1614 FIREPROOFING OF STEEL STRUCTURES (REF SPEC NO 6-68-0033) 1615 Concrete - Non FIM Items 1616 Supply and laying of concrete of grade M30 as per Type-I of EIL Standard Specification 6-68-0033 as fire proofing material with 10 mm and down size graded coarse and fine aggregates including admixture around structural steel members (viz. beams, columns, bracings etc.) all complete; cleaning the steel surfaces, supplying, placing and fixing in position cover plates conforming to IS:2062 and stiffeners for members exceeding 600 mm depth, supply and welding ofMS nuts on angle and box sections and cover blocks for other sections, supplying, placing and fixing in position galvanized expanded metal sheet with mesh size 4.5 mm x 13.5 mm conforming to IS:412 except on angle and box sections, hot dipped galvanized welded wire fabric reinforcement 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566, and tying the reinforcement to the cover blocks with galvanized 16 SWG tying wire, including cutting, straightening, cleaning, bending, vibrating, tamping, curing or providing a layer of approved membrane of curing compound, rendering with cement sand mortar (1:3) wherever required to achieve a smooth and even surface, providing L50x50x6 at corners or as specified in the drawing, applying primer on MS nuts, angles and affected surfaces, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions at all heights upto & including 10 m above pavement etc. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS INCLUDING CEMENT TO BE SUPPLIED BY THE CONTRACTOR). 1617 Vermiculite Concrete for Structural Steel - Non-FIM Items 1618 Supply and laying of vermiculite based lightweight cementitious concrete coating as per Type-II of EIL Standard Specification 6-68-0033 as fire proofing material of required thickness around structural steel members (viz. beams, columns, bracings etc.) for the required fire protection from reaching temperature 538 degree C; cleaning the steel surfaces and applying primer compatible to vermiculite material if required as per manufacturer specifications, supplying, placing and fixing in position cover plates conforming to IS:2062 and stiffeners for members exceeding 600 mm depth, supply and welding ofMS nuts on angle and box sections and cover blocks for other sections, supplying, placing and fixing in position galvanized expanded metal sheet with mesh size 4.5 mm x 13.5 mm conforming to IS:412 except on angle and box sections, hot dipped galvanized welded wire fabric reinforcement 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566, and tying the reinforcement to the cover blocks with galvanized 16 SWG tying wire, including cutting, straightening, cleaning, bending, applying primer on MS nuts and affected surfaces, curing or providing a layer of approved membrane of curing compound, patching of damaged portion wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions at all heights upto & including 10 m above pavement etc. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR). 1619 Supply and laying of vermiculite based lightweight cementitious concrete coating as per Type-II of EIL Standard Specification 6-68-0033 as fire proofing material of required thickness around structural steel members (viz. beams, columns, bracings etc.) for the required fire protection from reaching temperature 538 degree C; cleaning the steel surfaces and applying primer compatible to vermiculite material if required as per manufacturer specifications, supplying, placing and fixing in position cover plates conforming to IS:2062 and stiffeners for members exceeding 600 mm depth, supply and welding ofMS nuts on angle and box sections and cover blocks for other sections, supplying, placing and fixing in position galvanized expanded metal sheet with mesh size 4.5 mm x 13.5 mm conforming to IS:412 except on angle and box sections, hot dipped galvanized welded wire fabric reinforcement 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566, and tying the reinforcement to the cover blocks with galvanized 16 SWG tying wire, including cutting, straightening, cleaning, bending, applying primer on MS nuts and affected surfaces, curing or providing a layer of approved membrane of curing compound, patching of damaged portion wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions at all heights more than 10 m above pavement etc. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR). 1620 Vermiculite Concrete for Equipments - Non-FIM Items 1621 Supply and laying of vermiculite based lightweight cementitious concrete coating as per Type-III of EIL Standard Specification 6-68-0033 as fire proofing material of required thickness on equipment/ vessel skirts, saddles and supports for the required fire protection from reaching temperature 427 degree C; cleaning the steel surfaces and applying primer compatible to vermiculite material if required as per manufacturer specifications, supplying, placing and fixing in position cover plates conforming to IS:2062, hot dipped galvanized welded wire fabric reinforcement of 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566 and tying the reinforcement with the pre welded nuts by galvanized 16 SWG tying wire, including straightening, cutting, bending of the reinforcement, including supplying and welding of additional MS nuts if directed by the Engineer-in-charge, applying primer wherever required, curing or providing a layer of approved membrane of curing compound, patching of damaged portion wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR). 1622 Mechanical works 1623 Supplying, fabricating and erecting in position MS plates as per detailed drawings, conforming to grade A of IS:2062 on top of all RCC pedestals supporting the sliding saddles of equipments, including cutting, straightening where necessary, rounding rounding unfinished edges by grinding, machining the exposed top surface, making necessary bolt holes, providing and laying ready mixed free flow non-shrink grout below the base plate at all levels & locations, machining top surfaces etc. all complete and as shown and directed. 1624 SAFETY (REFER EIL SPECIFICATION) 1625 Safety Structures - Non FIM Items 1626 Supplying, Transporting, Storing, Fabricating & Erecting in position and testing/ examining bolted and/ or welded Structural Steel Works at all locations and levels in HANGER SCAFFOLDING below piperack, comprising of hangar channels, fabricated pen wen ladder beams, steel planks bent to shape and size and any other sections, if required, all as per sketches/ specifications and load tested for statisfactory performance, including cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, including preparation and submission of detailed fabrication drawings, preparing the surface for painting as per BIS codes after fabrication etc. all complete as specified and directed. All items shall be removed & carried back by Contractor as per instructions of Engineer-in-Charge after completion of works. (Supply of All Material In Contractors Scope). 1627 Providing and fixing double scaffolding system of any height made with 40 mm dia MS tube 1.5 m centre to centre, horizontal & vertical tubes joining with MS tubes, MS tube challies, MS clamps and MS staircase system in the scaffolding for working platform/ staircase etc., and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc., wherever required for inspection of work at required locations with essential safety features for the workmen etc., all complete as per directions and approval of Engineer-in-charge. (Height shall be measured from Floor/ platform from where scaffolding is erected) including providing Aluminium ladders for safe acess of workers. 1628 Supply of Safety Personnel 1629 Supply of HSE personnel SAFETY STEWARD over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1630 Supply of HSE personnel SAFETY SUPERVISOR over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1631 Supply of HSE personnel SAFETY OFFICER over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1632 Supply of HSE personnel HOUSE-KEEPING SUPERVISOR over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1633 GENERAL CIVIL 1634 TANK PADS 1635 PVC Liner 1636 Providing and laying of PVC LINER of thickness 30 MIL conforming to IS:15909 below tank pad foundations or any other placeat all heights & depths without any damage during subsequent activities including handling, transportation, unloading, storage, laying in position, jointing & overlapping as per manufacturers recommendations, including supply and providing Asphalt impregnated fiberboards for anchoring, etc., all complete as per drawings, specifications and directions of Engineer-in-charge. (All materials including consumables shall be in contractors scope of supply) 1637 Providing and laying in position 80mm dia. perforated uPVC pipes conforming to IS:9271 wrapped with 125mm thick layer of 40mm down size stone aggregates in Geotextile fabric, Terrum T 700 / equivalent, below tank pad foundations for all heights & depths complete as per drawings, specifications and directions of Engineer-in-Charge. (All materials including consumables shall be in contractors scope of supply) 1638 Providing and installation of uPVC leak detection well arrangement comprising of 80mm dia. uPVC pipe, tee, blind flange & threaded cap conforming to IS:13592 for leak detection purpose below tank pad foundations at all heights & depths including providing proper jointing as per code requirements or manufacturers recommendations for fitting in already installed uPVC pipes etc. all complete as per drawings, specifications & directions of Engineer-in charge. 1639 GENERAL CIVIL 1640 SITE GRADING & ROCK CUTTING FOR SITE GRADING 1641 Earthwork in excavation for general site grading, roads, embankments, etc. for all heights and depths in all types of soils except soft and hard rock, including clearing and stripping of the areas earmarked for excavation, removing shrubs, grass, bushes, vegetables growth and other objectionable materials, trees up to and inclusive of a girth of 30 cms. (girth measured at a height of one meter from ground level) including uprooting of roots, etc. taking spot levels, excavating to required depth, leveling, dressing and consolidating the excavated surface, sorting out the excavated soil into serviceable and unserviceable materials, transporting and stacking serviceable materials to demarcated areas anywhere inside plant boundary limitas per instructions of Engineer-in-Charge and disposal of unserviceable material anywhere inside plant boundary limit. All complete as per drawings, specifications and directions of Engineer-in-Charge. 1642 ROADS & FLEXIBLE PAVEMENT (UPTO WBM/WMM LAYER) 1643 Earthwork in filling with approved available earth for all heights and depths for road embankments, shoulders or any other place as directed to proper levels, slopes, grades and camber with selected earth (having CBR 8%) obtained from approved approved areas for all leads from Complex Limit including excavation of earth at approved areas, clearing and stripping at approved areas (if necessary) loading, unloading, transportation etc., clearing and stripping as per specifications, uprooting of vegetation, roots and disposal of the shrubs, bushes, roots etc., breaking clods, spreading in layers not exceeding 20 cm loose thickness, watering, ramming and compacting with road roller to give at least 97% of laboratory dry density with heavy compaction as perIS:2720 Part-VIII, providing testing apparatus and testing the degree of consolidation, dressing and leveling, etc. complete including disposal of allunserviceable materials if any within the boundary limit for all leads etc. as per drawings, specifications and directions of Engineer-in- Charge. 1644 Supplying and Laying of Wet Mix Macadam (WMM) in BASE COURSE (Section 406 of MORTH Specification of Road & Bridge works) using tough, clean, sound & durable stone aggregates including premixing the material (mixing in Plug Mill/ Pan Type Mixer), including transportation to site, laying & spreading in layers not exceeding 125 mm compacted thickness & rolling with vibratory roller 80-100 KN static weight or equivalent capacity to proper grade, camber & level with all leads & liftsetc. complete as per drawing, specifications (MORTH, EIL) & directions of Engineer-in-Charge. 1645 Supply of forged/ cast fittings 1646 Supplying the following forged fittings and flanges, conforming to piping material specifications of tender documents and delivering the same to Owners stores/workspot etc. all complete as per the directions of Engineer-in- Charge. 1647 Elbow 90 Degree for following Nominal Sizes and Piping Material Class 1648 Dia. 12 InchPipe Class A33A 1649 Dia. 3 InchPipe Class A91A 1650 Elbow 45 Degree for following Nominal Sizes and Piping Material Class 1651 Dia. 6 InchPipe Class A33A 1652 Dia. 8 InchPipe Class A33A 1653 Dia. 12 InchPipe Class A33A 1654 Dia. 3 InchPipe Class A91A 1655 Eccentric Reducer for following Nom. Dia. 1 x Nom. Dia. 2 and Piping Material Class 1656 Nom. Dia. 1 8 InchNom. Dia. 2 6 InchPipe Class A94A 1657 Equal Tees for following Nominal Sizes and Piping Material Class 1658 Dia. 12 InchPipe Class A33A 1659 Dia. 3 InchPipe Class A91A 1660 Flanges, complete with nuts, bolts, gasket etc., for following Nominal Sizes and Piping Material Class 1661 Dia. 3 InchPipe Class A91A 1662 Supplying the following spectacle blind assembly consisting of two number flanges, spectacle blind, nuts, bolts, gasket etc. complete conforming to piping material specifications of tender documents and all complete as per the directions of Engineer-in-charge. For following nominal size and piping material class 1663 Dia. 3 InchPipe Class A91A 1664 MISC. CIVIL AND STRUCTURAL WORKS FOR U/G PIPING AND OTHER CIVIL WORKS 1665 Providing and laying brick masonry with locally available bricks of specified class (Brick of class lower than specifiedshall not be accepted) in cement mortar 1:4 (1 cement : 4 Coarse sand) in one or more brick thickness and in any shape in foundation and plinth for valve pits, drains, circular/square maholes, wing walls, etc. including providing recesses, openings, etc. including curing, finishing the joints flush below ground level and raking out joints in plinth with all labour and material, etc. complete as per drawings, specifications and direction of Engineer-in-Charge.For following Brick Class. 1666 All materials including cement supplied by the Contractor and Following Brick Class 1667 Brick Class 5 1668 Providing 13mm thick average cement plaster in cement mortar 1:3 (1 cement: 3 sand) on brick walls/stone masonry/pitching or on concrete surfaces for manholes, valves pits, culverts, wing walls, etc. including cleaning and preparation of the surface, scaffolding, curing etc. for all depths and heights complete as per drawings specifications and direction of Engineer-in-Charge. 1669 All materials including cement supplied by the Contractor. 1670 MISCELLANEOUS ITEMS 1671 Supply and installation of combined safety shower and eyewash units as per spec. no.6-66-0038, including providing and fixing of necessary foundation bolts in foundations/ pavement etc. complete. Each safety shower shall have proper sign board with florescent letters showing their location, all complete as per specification, drawings and direction of Engineer-in-charge. 1672 Supplying & Laying 60mm thick interlocking Paver Blocks for footpaths and any other place etc. including providing 40 mm thick sand filling below Paver Blocks including compaction of sand layer, filling the joints by dry sand, providing precast kerb stone of PCC M 30 at edges and at every 6.0m across the foot path, including preparation of compacted base/ sub base etc. all complete as per drawing, standard, specificationand directions of Engineer-in-Charge. (All material including cement supplied by contractor, paver blocks shall confirm to category A as per IRC SP63. Colour and shape of paver block shall be as per Owner requirement.). 1673 Modification Works 1674 MODIFICATION AND EXTRA WORKS ( IF ANY ) Cuting,bevelling,fitup,welding of different sizes of CS piping of all thicknesses in shop ,in position, on ground and at all elevations, transportation of pipes,fittings,flanges etc. from owners storage point to work site/workshop,making necessary scaffolding,consumables,machinery,tools,tackles,labour and supervision including attending to repairs for completing the work as per instructions of Engineer -in -charge 1675 Flame cutting CS piping 1676 Beveling CS piping 1677 Fit-up and welding CS piping 1678 Removal and re-installation of fire hydrant 1679 Removal and re-installation of firefighting equipment (Fire Hydrant), including isolation valve and transporting the equipment, valve, flanges from removal point to work spot, and fixing of nuts, bolts, washers, gaskets as needed for fixing the equipment with matching flange etc. complete, including plugging the existing branch with blind flange as per specification, drawings and directions of Engineer-in-charge. (Pipes and fittings shall be supplied by owner as free issue material) 1680 NDT Testing 1681 RADIOGRAPHY :- Performance of radiographic inspection on piping of all types & thicknesses including providing or hiring of all necessary equipment and whatever else even though not expressly mentioned but required to perform the work as per specificationsand instructions of Engineer-in-Charge. Radiographs shall be submitted to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on repaired joints due to Contractors fault and for additional radiography necessitated due to poor performance of contractors welders shall be done at contractors cost) Note: Unit for radiography quantity is Nos of circumferential weld joints. 1682 FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF SPEC FOR NDT REQUIREMENT OF PIPING) 1683 Nominal Dia. 3 Inch 1684 Nominal Dia. 4 Inch 1685 Nominal Dia. 6 Inch 1686 Nominal Dia. 8 Inch 1687 Nominal Dia. 12 Inch 1688 Micrograding 1689 Micrograding of the area as directed to proper level, grade and camber including earthwork in excavation in all types of soils up to a maximum depth of 150mm, removing shrubs, vegetation bushes, grass etc., earth work in filling with select material from available earlier excavated soil and borrow earth (in case the select material from excavated soil is short for filling, filling shall be done with borrow earth, supply & transportation of borrow earth shall be paid separately under relevant item) up to a maximum compacted thickness of 150mm by spreading in layers not exceeding200mm loose thickness, watering, ramming & compacting with road roller or hand roller including hand ramming where road rollers or hand rollers are not accessible to give at least 90% of max. laboratory dry density as per IS:2720 part VII, including transportation, leveling, dressing, disposal of surplus earth, debris, etc. all complete as per specifications, drawings and direction of Engineer-in-charge. (Disposal areas shall be anywhere within the plant complex limit as identified by Engineer-in-Charge.) 1690 Dismantling works 1691 Removal of existing A/G piping 1692 Removal of existing A/G piping of all thickness including cutting, unbolting of flanged joints / cutting of pipe lines wherever required, removing supports, all fittings, flanges etc., cutting of pipes in appropriate lengths for transporting purpose, transporting all material to owners storage point within the complex as designated by Owner including stacking of material and disposing of waste etc. as instructed by Engineer - in - charge. 1693 For C.S. A/G Pipe of following nominal dia. 1694 Nominal Dia 8 Inch 1695 Nominal Dia 4 Inch 1696 Nominal Dia 6 Inch 1697 Nominal Dia 12 Inch 1698 Removal of existing U/G piping 1699 Removal of existing U/G piping including excavation in all types of soils except soft rock and hard rock, including supply of any additional material required so as to expose the pipes for removal / dismantling, taking all safety precautions, supporting existing U/G services, dewatering of surface / sub-surface water as required to facilitate dismantling of pipes, cutting of pipes in appropriate lengths for transporting purpose, removal of soft material from bottom of trench and compacting, backfilling with available selected earth including re-excavating the deposited soil excavated earlier, breaking clods, laying in thickness not exceeding 15cms, watering rolling and ramming by manual methods / mechanical Compactors to achieve 90% laboratory maximum dry density as per IS:2720 Part VII or 85% relative density as per IS:2720 part XIV as applicable, stacking of serviceable / unserviceable material, transporting and stacking of all piping material to Owners storage point, disposal of unserviceable material anywhere inside the complex etc. , all complete as per directions of Engineer-in-Charge. 1700 For CS Piping dismantling, Thickness <=10 mm , For following Nominal Sizes 1701 NB 2 inch - 6 inch 1702 NB 8 inch - 14 inch 1703 Portable/ trolley mounted Extinguishers 1704 Supply and installation of portable DCP ( Dry Chemical Powder Type) extinguisher including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification and directions of Engineer-in-Charge. 1705 Capacity in Kg 10 1706 Supply and installation of portable CO2 extinguishers including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification, data sheet and directions of Engineer-in-Charge. 1707 Capacity in Kg 4.5 1708 Capacity in Kg 2 1709 Painting of A/G pipes and valves 1710 Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects as per painting specification, drawings and direction of Engineer-in-Charge for all types of un insulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate, F9) shall be done in fabrication yard prior to erection. The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabrication as well as erection joints) shall be left unpainted till hydro testing. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines. 1711 Painting of uninsulated surfaces for Industrial marine environment as per painting specification for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following pipe sizes 1712 Nominal Dia. 12 Inch 1713 Nominal Dia. 4 Inch 1714 Nominal Dia. 3 Inch 1715 Nominal Dia. 6 Inch 1716 Nominal Dia. 8 Inch 1717 Painting of uninsulated surfaces for Industrial marine environment as per painting specification for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following valve sizes 1718 Dia. Of Valve 12 Inch 1719 Dia. Of Valve 4 Inch 1720 Dia. Of Valve 6 Inch 1721 Dia. Of Valve 3 Inch 1722 Dia. Of Valve 8 Inch 1723 Fabrication and Erection of piping (underground) 1724 FABRICATION AND ERECTION OF PIPING (SPEC. NO.6-65-0030 and 6-44-0012) : Laying and joining of Carbon Steel pipes and specials underground including transportation of all material from Owners storage point to worksite, earthwork in excavation in all types of soilEXCLUDING SOFT ROCK AND HARD ROCK for pipe trenches, saddles, etc. including dewatering of rain and /or sub soil water, shoring & strutting if required, dressing of sides, levelining, grading & ramming of bottom of trench, cutting of pipes if required, fitup, edge preparation, providing corrosion protection tape coating as per specification, on pipes and specials, laying the pipes in trenches to required alignment and levels, welding the same after laying, installation of flanges, blind flanges, tapping for pressure gauges, temperature gauges and all other online instruments and fittings like elbows, reducers, tees, flanges, spectacle blinds and spacer blinds etc., as per piping material specification, fixing of nuts, bolts, gaskets and washers, welding, corrosion protection coating of field joints, cutting of road wherever required and making good the same, testing for the corrosion protection coating as per specification, cleaning and flushing by water/ compressed air, hydrostatic/ pnuematic testing of the system, flushing, backfilling the trenches with select material from available excavated soil including re-excavating the deposited soil excavated earlier, breaking clods and laying in layers of 15 cm compacted thickness, watering, compacting with mechanical means like vibro rammers etc. to 90% of dry density as per IS:2720 Part-VII, disposal of surplus earth/ unserviceable material to demarcated area anywhere within the complex limit etc. complete as per drawings, specifications and instructions of Engineer-in-Charge including connecting the pipes to manhole, including return of all unused / scrap pipe to owners storage point (Pipes and fittings shall be supplied by owner as free issuematerial.) (Depth of excavation for pipe trench shall be upto 3.0m) 1725 Carbon SteelPiping (Non IBR), Thickness <=10 mm 1726 Fabrication, For the following nominal sizes 1727 NB 2 inch - 6 inch 1728 NB 8 inch - 14 inch 1729 Erection including corrosion protection coating, for Water System (Pressure Piping), Forfollowing Nominal Sizes 1730 NB 2 inch - 6 inch 1731 NB 8 inch - 14 inch 1732 Erection including corrosion protection coating, for Waste Water Collection System (Gravity Flow), for following Nominal Sizes 1733 NB 2 inch - 6 inch 1734 Fabrication and Erection of piping (Above ground) 1735 PIPING (ABOVE GROUND): Transportation of all piping items from owners storage point to work site/workshop, fabrication including cutting, edge preparation (including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required), fitup, bending, preheating wherever required, welding, threading, and laying of pipes of all type and thickness over pipe sleepers, overhead on racks and at all elevations, connectingwith equipment nozzles, strainers, orifice assemblies, tapping for pressure gauges etc., fixing of gaskets, bolts, nuts including application of torque wherever required and all other inline instruments and fitting like elbows, reducers, tees, vents, drains, SW valves upto 1.5 NB, alignment, cleaning & flushing by water/compressed air, hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified,draining, drying by compressed air completing all such works in all respects (including preparation of isometrics as mentioned in the scope of work for the job)as per drawings, specifications and instruction of Engineer-in-charge. (Pipes and fittings shall be supplied by owner as free issue material) 1736 Carbon SteelPiping (Non IBR), Thickness <=10 mm 1737 Fabrication, For the following nominal sizes 1738 NB 2 inch - 6 inch 1739 NB 8 inch -14 inch 1740 Erection , for Water System (Pressure Piping), Forfollowing Nominal Sizes 1741 NB 2 inch - 6 inch 1742 NB 8 inch -14 inch 1743 Supply of Carbon steel pipes 1744 Supply of Carbon steel pipes as per Piping material class including transportation of all material to owners store complete as per drawings, specifications and instruction of Engineer-in-Charge. For following nominal size and piping material class. 1745 Nominal Dia. 12 InchPiping Material Class A33A 1746 Nominal Dia. 4 InchPiping Material Class A33A 1747 Nominal Dia. 8 InchPiping Material Class A33A 1748 Nominal Dia. 6 InchPiping Material Class A33A 1749 Nominal Dia. 3 InchPiping Material Class A91A 1750 Supply and installation of valve assembly, flange assembly etc. 1751 Supply and installation of valve assembly consisting of valve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts & bolts per valve assembly, erection of valve in position including fixing of nuts, bolts, gaskets, washers etc. complete as per drawings, specifications and directions of Engineer-in-Charge. 1752 Gate valve assembly for following nominal sizes and piping material class 1753 Dia. 12 InchPMS A33A 1754 Dia. 8 InchPMS A33A 1755 Dia. 6 InchPMS A33A 1756 Dia. 3 InchPMS A91A 1757 Supply and installation of valve assembly consisting of valve, 1 no. flange, 2 no. gaskets and 2 sets of nuts & bolts per valve assembly, erection of valve in position including fixing of nuts, bolts, gaskets, washers etc. complete as per drawings, specifications and directions of Engineer-in-Charge. 1758 Dia. 4 InchPMS A33A 1759 Dia. 6 InchPMS A33A 1760 Globe valve assembly for following nominal sizes and piping material class 1761 Dia. 3 InchPMS A91A 1762 Supplying the flange assembly conforming to piping material specifications and delivering the same to owners stores/ work spot etc. Flange assembly shall consist of 2 no. flanges along with one no. matching gasket and one set of matching nuts &, bolts. All complete as per specifications and directions of Engineer-in-Charge. For following nominal size and piping material class 1763 Dia. 3 InchPMS A91A 1764 Supply, Fabrication and installation of strainers 1765 Supply, Fabrication and installation of strainers as per drawingsetc. complete as per specifications and directions of Engineer-in-Charge. 1766 T-type strainers for following nominal size and piping material class 1767 Dia. 3 InchPMS A91A 1768 fire fighting equipments 1769 Supply, installation, testing and commissioning of following firefighting equipment as per relevant specifications, data sheet, drawing, including transporting the equipment to worksite, fixing of nuts, bolts, washers, gaskets, welding needed for fixing the equipment with matching flange etc. all complete as per drawings, specifications, standards, data sheet and direction of Engineer-in-Charge. 1770 Double headed landing valve 1771 First Aid hose reel wall mounted type 1772 Hose box cabinet Type-II (Wall mounted type) including all inside accessories, including all civil works, fixing in position with anchor bolts in foundations or wall 1773 Hose box cabinet Type-II (self-supporting type) including all inside accessories, including all civil works, fixing in position with anchor bolts in foundations or wall 1774 Variable flow Water cum foam monitor of 500/750/1000 GPM capacity 1775 Stand Post Type Fire Hydrant without Pumper Connection 1776 Miscellaneous Items 1777 Miscellaneous 1778 Design, engineering, procurement, supply of all materials and equipment, machinery, civil, structural, electrical, mechanical, instrumentation, piping works including painting works, tape coating on U/G piping, commissioning spares and tools/tackles as per scope of work, specifications, drawings, data sheets etc. and as per directions of Engineer-in-Charge for Auto Actuated High Velocity Spray System on Transformers including taking approval of the complete system from agency appointed by insurance company /Client. Unloading at site, handling, transportation from store to work site, storage at site, fabrication, construction, assembly at site, supply of all labour, installation, field works including civil structural, electrical, mechanical, instrumentation, piping works and supports, testing, pre-commissioning, painting, commissioning and any other activity required to complete the works in all respects including performance guarantee run, handing over to client as per enclosed scope of work, drawings, specifications, instructions to vendors, data sheets and as per directions of Engineer in- Charge. Supply of mandatory spares as per specifications enclosed list/instructions to vendor as per scope of work and specification, drawings and documents as per attached vendor data requirement for all supplies and services etc. complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Delhi View Result →
39.
Public Administrative Department #9449825 Technical Bid
Tender for the work of auditorium landscaping, HVAC and PA system in the convention center under construction in sector-8 of Ram Ganga Awasiya Yojana, 1 WALL PANELING & FALSE CEILING Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete forall heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. Make: Armstrong/ Sant GobainD.S.R. Item No. 12.52.2 2 Providing and installation of acoustical wall panelling wood finish Slats made out of MDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless look, FR grade, of lineal dimension size 128mm x 2440mm x 16mm thick having density 1000Kg /m3, weight12.8Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centers. Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts both ways. Make. Armstrong / Sant GobainAs per Ref. BOQ Item No. 1.27 3 Providing and fixing in position Auditorium High Back chairs of inner side size width (W1)490X480X1020 with push back mechanism having seat assembly made of polyuret lane oam mou ded with M.S. tubular frame insert which is upholstered with fabric. The structural should be as per technical specification as mentioned below :- Back :- Back of chair shall be 470mmX730mmX130mm upholstered constructed with 19mm thick ply having proper curvature for lumber support with PIT. moulded foam having density 40±51:g/cum, upholstered chair back to have plastic back shall duly embossed, bend and Formed by ABS. The back of chair should have provision of seat number and same will be provided by the chair supplier. Seat Chair seat size to be 480X490 with thickness of minimum 130mm with 19mm plywood this should be covered with minimum 120mm in P.U. foam, fully upholstered with P.U. moulded foam having density 45±5kg/cum.Side panels :- All side panel to be of 12mm thick plywood covered with fabric and fused with 25mm thick loam, side panel to cover all exposed metal part. The end panel of row should have provision of row number indicator with LED light. Arm rest:- 2nd class teak wood melamine Polished arm rest of size 425X.65X40mm of approved design will be fixed above side panels. Fabric :- The Fabric shall be inherent Fire Resistant Fabric, 100% Polyester Stretchable Circular knit. Fabric, of approved make , shade and design of minimum 400 GSM, quilted with foam bonded fabric of 5.0mm thick. (The shade and quality is to be finalized by Engineer-in-charge as well as by the client department.)Push back :- (A) 1. A metal sheet mechanism duly embossed of size 450X440X1.6mm. 2. Block to be 2 triangular blocks duly embossed — 300X300mm with 4 of 9mm holes. . 3. Longitudinal tubes of size 40x20x490 mm of 1.6mm thickness- with 2 tubes each and 4 longitudinal tube of size 20x6 mm duly bent in shape to shape Riveted/Welded & approximately 350 mm long. 4. Seal back Bracket interconnected/Riveted/Welded and Back Bracket to be 200X60X1.6mm. 5. Seat Bracket to have stopper cup with 5 rivets and approximately 170X340X1.5mm — 2pairs for Seat/Back. 6. All rivets to be with nylon washers and pneumatic machine only. 7. Rollers to withstand temperatures up to 200 degree and oi sizes 22mm width & 38mm Dia, duly riveted and welded supported by metal sheet of size 30mmX120mm- I Pair. 8. All stopper material to be reinforced by nylon tubes of size 30mm. 9. Metal stand to be 300X300X3mm duly bent in 1 piece supported by 3 structures 20X40X270mm each. (B ) All exposed Metal parts shall be Powder Coated with 7 Tank process of minimum 50 Microns. Rigid PVC civic shall be used to hide all dashfasteners withy Nut bolts used in chair. The chair shall be installed using suitable anchor fasteners. The sample of chair shall be got approved from Engineer-incharge as well as by client department also before making mass production. (Nu additional time shall he given for this activity.) Any minor rectification/changes in above nomenclature of auditorium chair as required by Engineer-in-charge as well as client department, the same will be accepted and adopted for execution at site of work which includes in the rate of above item. Nothing extra will be paid on this account.acceptable Make : Godrej, Mars Slider High Back W/o Desklet with PU Armtop Azure Blue Main Chair Make: Godrej Interio Market Rate 4 Providing and fixing in Auditorium Flooring and Steps - Woven vinyl carpet floorings of vinyl woven series with roll dimensions of 1.8/2mtr meters width and length of 20 meters or Tiles size as per company standard should be approved by architect. 2.50-2.80 mm thickness to laid on hard, levelled, smooth and moisture free sub floor. Woven Vinyl flooring should have traffic classification 33 and weight of 2.7-3.5 kg/m2. Flooring should have caster chair EN-985 tested with color fastness of more than 6. It should be ASTME662 qualified on Smoke density test. Product must be fire rating of the product should be Bfl-S1. Any Joints in flooring rolls should be sealed with cold welding. This work will be inclusive of all Labour, Raw Material, Hardware, adhesive etc. complete. Carpet will be provided as per approved shade and colour in Approved Makes- Vibrant Floors/Armstrong Flooring/MAC ,as per the satisfaction of the Architect and Engg. Incharge.Market Rate 5 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.D.S.R electrical Item No. 1.35make:Schneider/Northwest 6 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. make:Schneider/NorthwestD.S.R electrical Item No. 1.49 7 Providing and fixing circular/Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3 mm dia round headed screwed, one loc at the conrners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.D.S.R electrical Item No. 14.15 8 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.D.S.R electrical Item No. 19.1make: Bajaj/Havells/Crompton 9 2 thick Slotted Wood Finish Wall Panel system on Masonry: Providing and fixing wall panelling on existing masonry with 50mm x 50mm Aluminium section framework of size 600mmx600mm grids and filled with acoustical insulation of 50 mm thickness 1000 gsm density from Star Insulation or Prime Insulation. The framework and acoustical infill is to be concealed behind the 15mm Slotted finish fire rated wood finish MDF panels from Topakustik, Wood Fit, Armstrong, Sound Slats, RPG or equivalent approved vendors. The perforated wood finish panels must have a minimum perforation area of 12% or higher and is to be supplied with black RP Tissue or equivalent of approved quality. This should be completed as per details and diagrams provided. Rate shall be inclusive of installation on the frame work arrangements. Works will be inclusive of scaffolding and staging at all levels. Rate shall include the preparation of detailed shop drawings as per site conditions, which shall be approved beforecommencement of worksMake : Armstrong/ Saint GobainAs per Ref. BOQ Item No. 1.26 10 ACOUSTIC DOOR WITH CHOWKHAT FOR DOOR OPENING SIZE 1.50M X 2.1M:Providing, Supplying, Installation, Testing and fixing in position a 65 mm thick acoustic door with chowkhat. Door should have a 150 mm x 300 mm vision panel of6.0 mm thick toughened glass. Both Shutters shall be made with 100mm x 50mm thick hardwood outer frame with 50 mm x 50 mm hardwood ribs at 500 mm c/cbothways. All woodwork shall be treated with anti-termite treatment. The door shutter shall have 6 mm thick BWP grade plywood fixed on its both sides. All the cavities inside the door shall be filled with high NRC acoustic insulation materials (rockwook of 60 kg/m3 density) Insides of the door will be lined with 3mm thick MLV Sheet of minimum 1700 kg/m3 density. Periphery of the the shutter shall be covered with 12mm thick teakwood lipping matching with the door frame. The external faces of the door shutter will be finished with 1mm thick laminate on both sides. Teakwood lipping will be melamine polished. Weather seal of Rehau make shall be fixed on the door frame to fill the gap of shutter and wooden frame. Drop down seal to be fixed in shutter to block the gap with floor when the door is closed. The cost shall include all hardware fittings like heavy duty SS Hinges ( 4inch long - 5 per door) , 1ft long D type SS 304 Handles of Godrej/Hettich/Dorma make ( both inside and outside).Make: GodrejAs per Ref. BOQ Item No. 1.19 11 Providing and fixing Godrej Kaditala 275 mm ChromeMake: GodrejAs per Ref. BOQ Item No. 1.20 12 Providing and fixing hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, for door weight upto 80 kg to 100 kg and door width from 750 mm to 900 mm), with double speed adjustment with necessary accessories and screws etc. complete.Make: GodrejAs per Ref. BOQ Item No. 1.21 13 Providing and Supplying factory made Podium table 8ft long x 2ft deep x 2.5ft high made with 25mm thick prelaminated HDF Board (all full round edges) with full Vanity panel on three sides and 3 internal vertical division panels of 1ft x 2.5ft for seating 3 persons on the TABLE. The design and color of the table will be as approved by the authorities.The table will have provision for fixing electrical points.The table will have provision for 8 Way LEGRAND POP-UP Box forDATA/HDMI/ELEC. points. Make : Legrand/SchneiderAs per Ref. BOQ Item No. 3.02 14 Providing and Supplying Podium Chairs ( Mid Back without wheels) of design and color approved by college authorities Make: Godrej/ Featherlite/ Geeken/ Durian MakeAs per Ref. BOQ Item No. 3.03 15 Providing and Fixing PVC Wall Paneling with all complete fitting Make : Armstrong/GyprocMarket Rate 16 Supplying of following LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF>0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required.SITC of Step light Colour: Anthracite grey Material Aluminum Dimensions 201 x 91 x 35 Lamp Base LED IntegratedWattage 5W ( (Equivalent to Philips Model No. B07LH1FXLR)As per Ref. BOQ Item No. 2.26 17 Supplying of following dimmable LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF>0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required. SITC of Recessed mounted 24 watt LED down lighter made up of high pressure die cast aluminium housing complete as required. (Equivalent to Lighting Technologies,MAke : Philips,Bajaj ) As per Ref. BOQ Item No. 2.25 18 Supplying of following LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF>0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required. Supply of 1200 mm long 20 watt LED luminiare (Make : Philips,Bajaj, Havelles LUMILINEPLUSBS20WLED865SPCSS)As per Ref. BOQ Item No. 2.27 19 Installation, Testing and Commissioning of BAJAJ single LED Signage BESL 03 LED SSD WBB GREEN above the exit doors of the auditorium including providing fixing neccassry base plate , point wiring, fitting fixture etc. complete.MAke : Philips/Bajaj As per Ref. BOQ Item No. 2.28 20 Supply installation testing of LEGRAND 8 WAY Conference Table POP UP BOX, with power , Lan , HDMI, Audio ,CGA & USB including all necessary associated hardware . Make : Legrand/SchneiderAs per Ref. BOQ Item No. 2.29 21 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).2.1 (dsr hort. 2020) 22 Supplying and stacking of good earth at site including royalty and carriageupto 5 km lead complete (earth measured in stacks will be reduced by20% for payment).2.2 (dsr hort. 2020) 23 Supplying and stacking sludge at site including royalty and carriage upto 5km lead complete (sludge measured in stacks will be reduced by 8% forpayment).2.3 (dsr hort. 2020) 24 Supplying and stacking at site dump manure from approved source,including carriage upto 5 km lead complete (manure measured in stackswill be reduced by 8% for payment) :2.4.1 (dsr hort. 2020) Screened through sieve of I.S. designation 20 mm 25 Supply & plantation of Trees upto 8ft to 10ft height well settled, all indigenous varieties (local) as per listed below, location and quantities shall be as per drawingMangifera Indica (Mango), Bacopa Monnieri (Brahmi), Terminalia Tomentosa (Asna), Azadirachta Indica (Neem) & Bambusa Bambos (Baans)Terminalia Arjuna (Arjun), Tectoria Grandis (Sagaun), Shorea Robusta (Saal), Stereospermum Tetragonum (Padal), Anogeissus Latifolia (Bakli), Madhuca Longifolia (Mahua) & Diospyros Malabarica (Gaub) Saraca asoca (ashok), Ficus religiosa (peepal), Ficus benghalensis (bargad), Aegle marmelos (bel) & Phyllanthus emblica (aonla) Pterocarpus Santalinus (rakta chandan), Butea monosperma (dhaak), Artocarpus altilis (kathal) & Santalum album (chandan) Saraca Asoka (Sita Ashok), True Cinnamon (Nag Kesar), Mangolia Champaca (Champa) & Mimusops Elengi (Maulsari) Saussurea Ggossypiphora (Mratyusanjeevani), Azadirachta Indiac (Neem) & Adiantum Venustum (Hansraj) 26 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted [email protected] litresolutionpersqmlawnorbedarea. (two application) i/c cost of chemical) and as per direction of officer-in-charge.and as per directionof officer-in-charge.2.56 (dsr hort. 2020) 27 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.2.33 (dsr hort. 2020) 28 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 2.13(dsr hort. 2020) 29 Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).2.25 (dsr hort. 2020) 30 Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 4.88(dsr hort. 2020) 31 Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. 4.91(dsr hort. 2020) 32 Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. 5.13(dsr hort. 2020) 33 Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge. 5.17(dsr hort. 2020) 34 Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge. 5.28(dsr hort. 2020) 35 Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.1 (dsr hort. 2020) 36 Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.3 (dsr hort. 2020) 37 Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.10 (dsr hort. 2020) 38 Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.6.14 (dsr hort. 2020) 39 Providing and stacking of Ophiopogon jaburan (variegated) ,full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 6.21 (dsr hort. 2020) 40 Providing and stacking of Alstonia scholaris of height 150-165 cm. in bagof size 25 cm as per direction of the officer-in-charge. 7.4 (dsr hort. 2020) 41 Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.8 (dsr hort. 2020) 42 Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.7.13 (dsr hort. 2020) 43 Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.17(dsr hort. 2020) 44 Providing and stacking of lotus flower of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. Mr 45 Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.2(dsr hort. 2020) 46 Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.8.7(dsr hort. 2020) 47 Providing and stacking of Cassia laevigata of height 45-60 cm. in earthenpots of size 20 cm as per direction of the officer-in-charge. 8.11(dsr hort. 2020) 48 Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.14(dsr hort. 2020) 49 Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. 8.54(dsr hort. 2020) 50 Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge. 9.2(dsr hort. 2020) 51 Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge.9.6(dsr hort. 2020) 52 Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 9.14(dsr hort. 2020) 53 Providing and Stacking of Anjeer of height 75-90 cm. in poly bagsof size 25 cm as perdirection of the officer-in-charge. 11.1(dsr hort. 2020) 54 Providing and Stacking of Satavari, well developed in earthen pot of size 20 cm as per direction of theofficer-in-charge. 11.6(dsr hort. 2020) 55 Providing and Stacking of Sarpgandha well developed in poly bag of size 20 cm as per direction of theofficer-in-charge.11.14(dsr hort. 2020) 56 Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-charge.11.17(dsr hort. 2020) 57 Providing and Stacking of Aprajita White well developed in poly bag of size 20 cm as per direction of the officer-in-charge.11.18(dsr hort. 2020) 58 IRRIGATION SYSTEMDRIP IRRIGATION SYSTEM FOR PLANTATION - ASYSTEM HEAD UNIT SNAD FILTER + BACKWASH ASSLY 2.5Make : Astral/FinolexP.S. 59 SCREEN FILTER 2.5Make : Astral/FinolexP.S. 60 ASSLY FOR FILTER 2.5Make : Astral/FinolexP.S. 61 PRESSURE GAUGE + STOP COCKMake : Astral/FinolexP.S. 62 PRV Make : Astral/FinolexP.S. 63 NRV Make : Astral/FinolexP.S. 64 NETWORK- FINOLEX HDPE & PVC PIPESMake : Astral/FinolexHDPE PIPE 75 MM PN4 (TANK TO PLOT)P.S. 65 PVC PIPE 75 MM 4KG/CM2Make : Astral/FinolexP.S. 66 PVC PIPE 63 MM 4KG/CM2Make : Astral/FinolexP.S. 67 EMITTING SYSTEMMake : Astral/FinolexFINOGOL PLAIN LATERAL 16 MMP.S. 68 DRIPPER 8 LPH Make : Astral/FinolexP.S. 69 START TO END SET FOR DRIP LINE 16 MMMake : Astral/FinolexP.S. 70 BARBED COUPLER 16 MMMake : Astral/FinolexP.S. 71 TEE 16 MMMake : Astral/FinolexP.S. 72 ELBOW 16 MMMake : Astral/FinolexP.S.. 73 ELBOW 16 MMMake : Astral/FinolexP.S.. 74 BALL VALVE 63 MMMake : Astral/FinolexP.S. 75 FLUSH VALVE 63 MMMake : Astral/FinolexP.S. 76 VALVE BOX 12Make : Astral/FinolexP.S. 77 Pump: Crompton Greaves 10.00 Hp pumpwith necessary accessories.(Market Rate) P.S. 78 Providing and fixing H.D.P. container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destinatin hoisting and fixing of accessories such as inlet,outlet over flow of all tanks capacity above 1000 to 20,000 litresMake : Astral/FinolexD.S.R. 18.48 79 Water tank platform& ShedExcavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.)D.S.R. Item No. 2.2.1) 80 Providing & laying cement concrete1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.8 81 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)D.S.R. 4.20.1.2 82 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)D.S.R.4.20.1.3 83 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.D.S.R. Item No. 5.22.1 84 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)D.S.R. 7.1.1 85 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)D.S.R. 7.2.1 86 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :13.33.1 Flush/ Ruled pointing sqm 87 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.SHS 60x60x3 Column (5.34Kg/mtr)ISA 40X40X3 (1.83 Kg/mtr)Cleat ( 35X35X3)Base Plate ( 200x200x6)(7850 Kg/Cum)Top Plate ( 200x200x6)D.S.R. 10.20 88 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),D.S.R. Item No. 12.1.1 89 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete asrequired. Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.1 (Electrical) 90 Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.2 (Electrical) 91 Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.3 (Electrical) 92 Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.4 (Electrical) 93 Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.5 (Electrical) 94 Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt ACsupply complete as required. Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.6 (Electrical) 95 Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required. Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.7 (Electrical) 96 Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required. Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.8 (Electrical) 97 Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.9 (Electrical) 98 Supply, installation, testing and commissioning of 25 mm Outer dia CPVC PIPE with end caps including making air sampling opening of appropriate dia on appropriate interval and all accessories as required,(rate for area protected in sqm).Make : Astral/FinolexD.S.R. Item No. 17.4.1 (Electrical) 99 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.D.S.R. Item No. 17.5.1 (Electrical) 100 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.D.S.R. Item No. 17.5.2 (Electrical) 101 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessedsteel conduit of following pairs, cores and size including connections and interconnections etc. as required.Speaker cable Single pair, 2-core, 1.5 sqmmD.S.R. Item No. 17.5.3.1 (Electrical) 102 Speaker cable Two pair, 2-core, 1.5 sqmmD.S.R. Item No. 17.5.3.2 (Electrical) 103 Speaker cable Three pair, 2-core, 1.5 sqmmD.S.R. Item No. 17.5.3.3 (Electrical) 104 Speaker cable Four pair, 2-core, 1.5 sqmmD.S.R. Item No. 17.5.3.4 (Electrical) 105 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupleretc. as required.D.S.R. Item No. 17.5.4 (Electrical) 106 AUDIO , VIDEO & LIGHTING WORKSSITC of Main FOH speaker having 12 inch woofer or better, min. 1.5-inch Compression driver ; Frequency Response : 82Hz-18kHz or better; Nominal Dispersion : 90° H x 60° V or better ; Power handling capacity : 250W or better; Nominal Impedance : 8O; Max SPL: 125 dB or better; Polyproylene enclosure, powder-coated finish; complete with all standard accessories as required.Make: Philips, Sony or JVRRate as per Ref. BOQ Item No. 6.01 107 SITC of Mounting/ Hanging arrangement of speaker complete with all standard accessories as required. Heavy duty Powder coated MS frame /Bracket fixed with SS Dash Fasteners of HILTI / FISHER MakeMake: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.02 108 SITC of Active Subwoofer having 18 single driver; Frequency Response : 47Hz- 105Hz or better; Max SPL (Peak) : 132dB or better; Power handing capacity : 1200W or better; complete with all standard accessories as requiredMake:Philips, Sony or JVRRate as per Ref. BOQ Item No. 6.03 109 SITC of Active Stage Monitor Speaker System having 12 single driver; Frequency Response : 65Hz - 18kHz orbetter; Max SPL (Peak) : 126dB or better; Power handingcapacity : 1000W or better; complete with all standardaccessories as required.Make: Philips, Sony or JVRRate as per Ref. BOQ Item No. 6.04 110 SITC of Dual-channel professional amplifier with 2 inputchannel, should have power output of 2x 350W @8O and2 x 660W @4O or better; Should have power outputBridged mode 2000W @4O Should have Frequencyresponse: 10Hz- 21kHz or better; Total harmonicdistortion (THD): =0.05% or better; Channelsperation(Crosstalk): = -80 dB or better, S/N ratio >104dB or better, Built-in DSP feature complete with allstandard accessories as required. (Dynacord/Bose/Powersoft)Make: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.05 111 SITC of Loudspeaker Management System 2 x 6 loudspeaker management system having 2x line inputs, 6x balanced outputs, input impedance > 50k O or better, CMRR: >45dB or better, Max. output level +22dBu or better, A/D performance Dynamic range >112dB Aweighted and D/A performance- Dynamic range 110dB Un- weighted or better complete with standard accessories as required.Make: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.06 112 SITC of 16 channel analog mixer with 8 mic/line input or better & 2 stereo output or better; 2 or better group buses; 3 or better AUX / FX send, Frequency response : 20Hz- 20kHz or better; Phantom power : 48V or better; THD : 0.03% or better; complete with all standard accessories.Make: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.07 113 SITC of Wireless Handheld microphone with Frequency response : 60Hz - 14kHz or better; Bandwidth: 24MHz; Total harmonic distortion (THD) : < 0.9%; Signal to noise ratio : > 103 dB; Pattern : Cardioid; Microphone type: dynamic; RF Power : 10mW or better; Operating time : 8 hours or better complete with all standard accessories.Make: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.08 114 SITC of Wireless Lavalier microphone with Frequency response : 60Hz - 14kHz or better; Bandwidth: 24MHz; Total harmonic distortion (THD) : < 0.9%; Signal to noise ratio : > 103 dB; Pattern : Omnidirectional; Microphone type: Condenser; RF Power :10mW or better; Operating time : 8 hours or better complete with all standard accessories. Make: Bose/D&B Audiotechnik(Shure /Sennheiser/ Clock Audio / ElectroVoice)Rate as per Ref. BOQ Item No. 6.09 115 SITC of Wired handheld microphone with Frequency response : 50Hz - 16kHz or better; Pattern : Cardioid; Microphone type: Dynamic; Rugged metal housing; Sensitivity : 2.7mV/Pa or better, complete with all standard accessories. Make: Bose/D&B Audiotechnik(Shure /Sennheiser/ Clock Audio / ElectroVoice)Rate as per Ref. BOQ Item No. 6.10 116 SITC of CD player complete with all standard accessories(Gemini/LG/Panasonic/Sony)Rate as per Ref. BOQ Item No. 6.11 117 SITC of 4 Point XLR Junction Box complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.12 118 SITC of 2 core 2.5 sqmm Speaker Cable complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.13 119 SITC of 2 core PVC insulated Microphone Cable complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.14 120 SITC of Connector & Patch Cords complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.15 121 SITC of 9U Equipment Rack for housing all rack mountable equipments with internal wiring, front glass door; heat dessipation fans; movement wheels, power distributionunits etc. complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.16 122 SITC of 6000 lumens laser Projector with 0.67 DMD technology or better; Contrast ratio (Native): 2,000:1 or better; Resolution : WUXGA or better; Inputs : 2 x HDMI or better, 1 x VGA or better, 1 x HDBaseT or better, 2x Audio in, 1x Mic in, 1x Audio out(3.5mm jack). Should have Horizontal & Vertical Keystone correction ±30°; should have 10-bit color display; Control : RS232 etc. complete.Make: PanasonicRate as per Ref. BOQ Item No. 6.17 123 SITC of Mounting/hanging arrangement of Projector complete with all standardaccessories.Rate as per Ref. BOQ Item No. 6.18 124 SITC of 150 motorized projection screen with 16:10 aspect ratio complete with all standard accessories (Somfy motor)Rate as per Ref. BOQ Item No. 6.19 125 SITC of Wall Plate type transmitter & Receiver extender with 1 x HDMI or better, 1 x VGA with audio input (Tx) or better, 1 x Twisted Pair output (Tx) or better; 1 x Twisted Pair Input (Rx) or better, 1x HDMI output(Rx) or better; transmission range :70 meter or better; Auto-switching between inputs; Supports computer and video resolutions up to 4K or better; Max Data rate : 10.2 Gbps or better; HDCP 1.4 or better compliant; complete with all standard accessories.Make :Extron/Crestron/Lightware / Liberty AV)Rate as per Ref. BOQ Item No. 6.20 126 SITC of 1.8 meter HDMI-HDMI Cable complete with all standard accessories.(Make: Belden/ Kramer / Liberty AV)Rate as per Ref. BOQ Item No. 6.21 127 SITC of 1.8 meter VGA-VGA with audio Cable complete with all standard accessories.(Make: Belden/ Kramer / Liberty AV)Rate as per Ref. BOQ Item No. 6.22 128 SITC of of Twisted Pair Cable complete with all standard accessories6.23 129 SITC of 100W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9° / 25° / 45° Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment5 Pin XLR for DmX , Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015,EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product.(Make: Bajaj/Leksa Lighting / Kenson Solace / Aultra Lighting / Canara)Rate as per Ref. BOQ Item No. 6.24 130 SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times/Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the keypresentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certificationcompliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product (eksa Lighting / Kenson Solace / Aultra Lighting / Canara)SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT ColourTemperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times/ Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the keypresentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified)Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certificationcompliant to EN60598-1:2015, EN61437-2-13:2014LM79 Certificates from NABL Acrediated laboratory.Brand embosed impact on the light body for genuine product(Make: Bajaj /Philips/ eksa Lighting / Kenson Solace / Aultra Lighting / Canara)Rate as per Ref. BOQ Item No. 6.25 131 SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) (Leksa Lighting / Kenson Solace / Aultra Lighting / Canara) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming , In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 3 / 5 PinXLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protectionPowder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body.RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABLAcrediated laboratory. Brand embosed impact on the light body for genuine product. Make: Bajaj/PhilipsRate as per Ref. BOQ Item No. 6.26 132 SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safeworking load 150 KG Suitable to Batten of size 30 OD to 60 OD (Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara)Rate as per Ref. BOQ Item No. 6.27 133 SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. CarabinerClip(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.28 134 SITC of Fixed on stage Lighting bar/winch of 6 Mtr length constructed with an single contruction light bar Made out of 48mm Outer Dai, 40 Nominal Bore, Mild Steel Pip It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm.Each fastnerMade out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe Dual Barrel Arrangement and an additional End Caps on the Pipe end Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions.Suspender prices are included(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.29 135 SITC of Power Distribution Electrical panel having a Individual MCB control for 6 outgoing circuits Made up of MS Sheet metal fabricated housing Black powder coated Ivery connectors for the internal terminations and external outgoing connecting points, Fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Custom built as per specification and project requirement.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.30 136 SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to +70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Blackpowder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floorfixing.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.31 137 SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ), Total Max Rating 10A, 250V A.C 20°C to +70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.32 138 SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated,fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.33 139 SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistantinsulator material All metal housing offers best overall RF protection & electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.34 140 SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation HardwaresRate as per Ref. BOQ Item No. 6.35 141 SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heatdessipation provided with lid.Rate as per Ref. BOQ Item No. 6.36 142 SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection forCross connecting DmX wiring connections.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.37 143 SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing.(Make : Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.38 144 SITC of DmX Controller 12 Faders to control atleast 12 channels with Master control fader ,12 Set Scene saving options Master Fader Enabled Controller , LCD display access,Eeasy access key pads 12 Physical Fader unit for direct access Incremental Channel Up & Down Buttons DmX 512 protocol.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.39 145 SITC of DmX Controller 12 Faders to control atleast 12 channels with Master control fader ,12 Set Scene saving options Master Fader Enabled Controller , LCD display access,Eeasy access key pads 12 Physical Fader unit for direct access Incremental Channel Up & Down Buttons DmX 512 protocol.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.40 146 SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size.Rate as per Ref. BOQ Item No. 6.41 147 SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmit DmX signalRate as per Ref. BOQ Item No. 6.42 148 38 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X38) Make: Daikin/Mitsubishi Electric 149 36 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X36) Make: Daikin/Mitsubishi Electric 150 34 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X34) Make: Daikin/Mitsubishi Electric 151 12 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X12) Make: Daikin/Mitsubishi Electric 152 Indoor Unit Cassette TypeSupply, Installation, Testing & Commissioning of following minimum capacity 4-way flow VRF/VRF Cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolator, cordess remote control etc., suitable for operation on single phase 230V + 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.Make: Daikin/Mitsubishi Electric3.2 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.8) 153 2.0 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.5) Make: Daikin/Mitsubishi Electric 154 0.8TR(As per DSR_VRF/VRV _2019_3.2)Make: Daikin/Mitsubishi Electric 155 1TR(As per DSR_VRF/VRV _2019_3.3) Make: Daikin/Mitsubishi Electric 156 1.3TR(As per DSR_VRF/VRV _2019_3.4) Make: Daikin/Mitsubishi Electric 157 1.65TR(As per DSR_VRF/VRV _2019_3.6) Make: Daikin/Mitsubishi Electric 158 2.0 TR(As per DSR_VRF/VRV _2019_3.7) Make: Daikin/Mitsubishi Electric 159 Indoor Unit Ductable TypeSupply, Installation, Testing & Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V + 10%, 50Hz, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.Mid Static Ductable Units (Minimum 45 Pascal External Static Pressure) Make: Daikin/Mitsubishi Electric4.0 TR(As per DSR_VRF/VRV _2019_4.16) 160 High Static Ductable Units (Minimum 110 Pascal External Static Pressure) Make: Daikin/Mitsubishi Electric5.5 TR(As per DSR_VRF/VRV _2019_4.17) 161 7.1 TR(As per DSR_VRF/VRV _2019_4.18) Make: Daikin/Mitsubishi Electric 162 8.0 TR(As per DSR_VRF/VRV _2019_4.19) Make: Daikin/Mitsubishi Electric 163 4.0 TR(As per DSR_VRF/VRV _2019_4.16) Make: Daikin/Mitsubishi Electric 164 11.0 TR (Market Rate) Make: Daikin/Mitsubishi Electric 165 15.0 TR (Market Rate) Make: Daikin/Mitsubishi Electric 166 17.0 TR (Market Rate) Make: Daikin/Mitsubishi Electric 167 Supply Installation, testing & commissioningof Y-joints for various size of Refrigerant pipe including insulation. (As per MR-1)(Rate=4123/1.18) 168 Centralized controllerSupply Installation, testing & commissioningofMainIntelligenttouch screen centralcontroller systemincluding all the accessoriessuitableto operate, monitor, on/off, temperature setting of all the indoor units individually complete as required and as specified. (As per MR-2) (Rate=80703/1.18) 169 Copper Refrigerant PipingSupply, Installation, Testing & Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with with Class-O closed cell elastometric nitrile rubber insulation of specified thickness as given below for Suction and Liquid lines, exposed piping shall be protected with UV & water protective coating, all accessories as per specifications etc. as required:6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation (As per DSR_VRF/VRV _2019_5.1) 170 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.2) 171 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.3) 172 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.4) 173 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.5) 174 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.6) 175 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.8) 176 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.10) 177 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.12) 178 Drain PipingSupplying & fixing of UPVC drain piping with all fitting such as bends, tees etc. necessary clamps, adequate support duly insulate with 9 mm nitrile rubber insulation complete as per technical specifications, requirement, standardard and drawings complete as required.50 mm dia(As per MR-3)(Rate=298/1.18) 179 40 mm dia(As per MR-3) (Rate=204/1.18) 180 32 mm dia(As per MR-3) (Rate=157/1.18) 181 25 mm dia (As per MR-3) (Rate=121/1.18) 182 Inline FansSupply, Installation, testing and commissioning circular direct driven / cabinet inline fans of G.I. construction complete with centrifugal fan with motor, accoustically lined, canvass connection at inlet and outlet complete with electric panel with MCB and relays, with 5 Rm cabling and earthing complete as per standards, requirement and drawings. 3300 cfm 20 mmwg S.P(As per MR-4)(Rate=45163/1.18)Make: Daikin/Mitsubishi Electric 183 800 cfm 15 mmwg S.P(As per MR-4) (Rate=23520/1.18) Make: Daikin/Mitsubishi Electric 184 550 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Daikin/Mitsubishi Electric 185 500 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Daikin/Mitsubishi Electric 186 450 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Daikin/Mitsubishi Electric 187 400 cfm 15 mmwg S.P(As per MR-4)(Rate=15743/1.18) Make: Daikin/Mitsubishi Electric 188 350 cfm 15 mmwg S.P(As per MR-4)(Rate=15743/1.18) Make: Daikin/Mitsubishi Electric 189 300 cfm 15 mmwg S.P(As per MR-4) (Rate=14056/1.18) Make: Daikin/Mitsubishi Electric 190 250 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Daikin/Mitsubishi Electric 191 200 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Daikin/Mitsubishi Electric 192 150 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Daikin/Mitsubishi Electric 193 100 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Daikin/Mitsubishi Electric 194 Propeller Type FanSupply, installation, testing and commissoning of propeller type fan for exhaust air complete with in and out gravity louvers, 3 pin socket with 5RM cabling complete as per specifications, requirement, standard and drawings.Make: Daikin/Mitsubishi Electric200 mm dia,5 mmwg S.P. (As per MR-5)(Rate=13039/1.18) 195 Exposed Copper Pipe CoatingSupplying and fixing of UV/fire/water, thermal protective coating, with canvas/glass fibre cloth, coating on copper pipe insulation by wrapping canvas/glass fibre cloth dipped instarbond/polybond30-36completeasperspecificationsanddrawings.(Thepriceshouldbequotedconsideringminimum3coatsof30-36chemical). (AsperMR-6) (Rate=587/1.18) 196 Packaged Type AirwasherSupply, installation, testing and commissioning of floor mounted CELLULOSE FILL AIR-WASHER complete with double skin construction fabricated out of extruded aluminium sections with 0.8 mm thick pre-plasticised GI sheet on out side and 0.8 mm thick plane GI sheet inside with 25 mm thick insulation, 40 Kg / m3 density PUF insulation in between. The unit shall comprise of supply fan sections with DIDW backward curve fans (efficiency not less than 75%) suitable for static pressure as required,belt drivepackage with TEFC drive motor of efficiency class IE3suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply, giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing for Air washer section, 18G SS-304 water tank, Cellulose fill, water distribution header, PVC piping, butterfly valves, for quick fill, isolation of tank, pumps and brass strainers, Y strainers, fire rated flexible duct connections & aluminium volume control damper at blower discharge and necessary fittings, belt drive package, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. The fan and motor shall be mounted on aluminium extruded section.The unit shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen synthetic washable filters and four bend PVC drift eliminators and horizontal monoblock pumps of suitable rating, factory mounted on mild steel channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor complete as required confirming to specification. Make: Daikin/Mitsubishi Electric3,000 CFM, 50 mmwg Static Pressure (As per MR-7)(Rate=205427/1.18) 197 Exhaust ScrubberSupply, installation, testing & commissioning of double skin exhaust scrubber of 0.6 mm inner and outer skin construction fabricated from precoated sheet blower housing with DIDW backward curved centrifugal blower with fan motorand belt drive arrangement with totally enclosed fan cooled class F insulation, with IP 55 protection, TEFC high efficiency motor type IE-3 suitable for 415+-10% volts, 50 HZ, 3 Phase A.C. supply, all accessories like common base frame, fan, motor pulley, belts, fire proof canvass connection, vibration isolator, prefilters, wet scrubber section, spray, nozzels, filters, M.S. frame for supports etc.complete as per specifications, requirement, standardard and drawings.Make: Daikin/Mitsubishi Electric4,000 CFM, 65 mmwg Static Pressure (As per MR-8) (Rate=220100/1.18) 198 DuctingSupply, installation, balancing and commissioning of factory fabricatedGSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.G.I. Sheet Metal Ducting (Rectangular)Thickness 0.63 mm sheet (As per DSR_E&M _2022_16.12.1.1)(Rate=1080/1.12) 199 Thickness 0.80 mm sheet (As per DSR_E&M _2022_16.12.1.2)(Rate=1263/1.12) 200 Thickness 1.0 mm sheet (As per DSR_E&M _2022_16.12.1.3)(Rate=1381/1.12) 201 Thickness 1.25 mm sheet (As per DSR_E&M _2022_16.12.1.4)(Rate=1836/1.12) 202 Grilles / DiffuserSupply, installation, testing and commissioning of Aluminium extruted powder coated supplyand returnairgrilles/ diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/Consultants).Supplying&fixingofpowdercoatedextrudedaluminiumSupplyAirGrillswithaluminiumvolumecontroldampersasperspecifications.(AsperDSR_E&M_2022_16.15)(Rate=9105/1.12) 203 Supplying&fixingofpowdercoatedextrudedaluminiumReturnAirGrillswithlouversbutwithoutvolumecontroldamperscompleteasrequired.(AsperDSR_E&M_2022_16.16)(Rate=5910/1.12) 204 Supply, fixing, testing & commissioning of Return air diffussers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.(As perDSR_E&M _2022_16.18)(Rate=8121/1.12) 205 LouversSupply and fixing of Fresh / Exhaust air Aluminium extruded with bird screen, damper adjustable louvers as per specifications and drawings.(As per MR-9)(Rate=12986/1.18) 206 Volume Control DamperSupply, installation,testing andcommissioning ofGIvolumecontrol duct damper completewith neoprenerubber gaskets, nuts, bolts, screws linkages,flanges etc, as per specifications. (As per DSR_E&M _2022_16.13)(Rate=7046/1.12) 207 Flexible DuctSupply of 25 mm glass wool insulated double lamination of metalize polister film parmantely bounded to a coated spring wire, helix and resistant construction of tear and pincture branch and collor where ever suitable of following sizes. Connected at both ends with necessary jublie clamps150 MM Dia(As per MR-10)(Rate=404/1.18) 208 IsolatorSupplying & installation of weather proof isolator with suitable rating near each outdoor unit and complete as required. 63 Amps(As per MR-11)(Rate=5136/1.18) 209 40 Amps(As per MR-11)(Rate=5136/1.18) 210 Control & Transmission WiringSupplying & fixing control cum transmission wiring of copper in heavy duty conduits PVC conduits between indoorand out door unit. (As per MR-12)(Rate=113/1.18) 211 Sub Panel For KitchenSupply, installation,testing & commissioning of sub panel board cubical compartmentalised, weather proof Floor/ Wall mounted made of 2.0 mm thick steel sheet duly painted completewithvoltmeter,ammeter,indicatinglightsforselectorswitch,incoming/outgoingfeeders,NO/NC contactors,CTScontactorscompleteasperspecificationsand requirement1 No. 32 Amps TPN incoming MCB1 set 40 Amps TPN Aluminium conductor bus bar duly sleeved.2 Nos. 25 Amps MCB outgoing along with 2 Nos. DOL starter for Scrubber Motor (5.5 kw) (1 No Spare). 2 Nos. 16 Amps MCB outgoing along with 2 Nos. DOL starter for Airwasher Motor (3.7 kw) (1 No Spare).3 Nos. 6 Amps SPN MCB outgoing for Airwsher & Scrubber Pump.(0.37 / 0.55 kw) (1 No. Spare).(As per MR-13)(Rate=124723/1.18) 212 Power CablingSupply & fixing of PVC sheathed Aluminium / Copper cables for various equipments through walls/ceiling with appropriate clamps & fixing arrangement as per specifications and drawings.3C - 4 sqmm (Aluminium) for Airwasher & Scrubber(As per MR-14)(Rate=126/1.18) 213 3C - 2.5 sqmm (Aluminium) for Airwasher & Scrubber pump(As per MR-14)(Rate=117/1.18) 214 4C - 16 sqmm (Copper) (As per MR-14)(Rate=1102/1.18) 215 4C - 10 sqmm (Copper) (As per MR-14)(Rate=753/1.18) 216 Cable TraySupplying and installation of following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.2)(Rate=604/1.12) 217 300 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.4)(Rate=777/1.12) 218 450 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.6)(Rate=1137/1.12) 219 EarthingProviding and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (As per DSR_E&M _2022_5.15)(Rate=244/1.12) 220 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.(As per DSR_E&M _2022_5.16)(Rate=70/1.12) 221 Ductable Split UnitSupplying,installation,testing & commissioning of ductable type split unit air-conditioners with evaporator with coil, fan and fan motor, aircooled condenser with hermatically sealed scroll compressor, condenser coil, propeller fans controls, mounting stand for ODU, control panel, corded remote, canvass connection as per standards, requirement and drawings.Make: Daikin/Mitsubishi Electric3.0 Tons(1 Working & 1 Standby) for Server Room(As per MR-15)(Rate=88040/1.18) 222 Refrigerant Piping (For Split)Supplying & installation copper soft/hard refrigerant piping along (Circuit length) with control cabling and earthing should be insulated with 9 mm thick pipe section of nitrile rubber complete in all respect.3.0 Tons Ductable Split Unit(As per MR-16)(Rate=1981/1.18)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
40.
Power #9441224 Technical Bid
Tender For Servicing, Overhauling And Maintenance Of Swas Field Equipment’S & Wet Panel And Different Other Mechanical Work During Overhauling Of Unit No. 11 Of 3X200mw, Btps, Obra, 1 Changing Spindle / Gland Of Root Valves 2 Cleaning & Blowing By Air Of Impulse Pipelines From Tapping Point To Swas System ( Wet & Dry Panel ) Of Different Samples 3 Attending Of Leakage From Steam / Water / Air Lines Of Different Samples. 4 Replacement Of Pressure Gauge / Temperature Gauges / Pressure Switches / Temperature Switches Etc. 5 Servicing, Testing & Calibration Of Pressure Gauges. 6 2X4 Ton Chiller Unit- Checking, Cleaning, Servicing, Overhauling And Reconditioning Of Compressor, Main / Circulating Pump & Motor, Storage Tank Solenoid Valve, Temperature & Pressure Gauge, Sensor, Dryer, Inlet / Outlet, Valve, All Tubing & Fittings, Electrical Equipment & Wiring Etc. De-Scaling Of Condenser And Cooling Coil, Filling Of Required Refrigerant Gas And Repairing / Replacement Of Defective Spares. 7 Servicing, Testing & Calibration Of Temperature Gauges. 8 Servicing, Testing, Calibration Of Temperature Switches. 9 Cleaning / Servicing Of Terminal Blocks / Panels At Swas. 10 Replacement Of Ss Root Valves / Sample Relief Valve. 11 Servicing Of Valve 10Mm Size High Pressure / Low Pressure, Manifold Valves, 3-Way Valves Etc. 12 Replacement Of Valves 10Mm Size High Pressure / Low Pressure, Manifold Valve, 3-Way Valve Etc. / Rota Meter / Self-Pressure Valve. 13 Replacement Of Impulse Line As Required 14 Servicing Of Sampling Cooler Dhx18 / Sco2 And Its Recommissioning. 15 Servicing Of Cooler Dhx12 / Sco2 And Its Recommissioning 16 Servicing Of Cooler Dhx-06 / Sco2 And Its Recommissioning 17 Mechanical Fabrication
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Uttar Pradesh View Result →
41.
Power #9426057 Technical Bid
Tender For Supply Of Gasket For 315 Mva 400 / 220 / 33 Kv Areva Make Transformer At 400 Kv Sub-Station Jaunpur, Machhalishahar Under Electiricty Transimssion Division - Ii, Jaunpur.; 1 Supply Of New Gaskets For 315 Mva 400 / 220 / 33 Kv Areva Make Transformer Sr. No. B300633, Make Of Good Quality Rc-70C Rubberized Cork Sheet ( 3 - 20 Mm Thick ) / Orings / Cord / Rubber Ball Of Kotika / Telbroze / Nu-Cork Makeand Gasketshould Bemade Of Die As Per Site Requirement With Following Details. 2 Gaskets Of 400 Kv Turrets ( Top & Bottem ) 3 Gaskets Of 400 Kv Bushings 4 Gaskets Of 220 Kv Turretsa ( Top & Bottom ) 5 Gasket Of 220 Kv Bushing 6 Gaskets Of 33 Kv Turrets ( Top & Bottom ) 7 Gaskets Of 33 Kv Bushing 8 Gaskets Of 33 Kv Bushing Of Top Seal 9 Gaskets Of Netural Bushing Turrets 10 Gaskets Of Netural Bushing Turrets ( Top Bottom ) 11 Gaskets Of Main Tank Inspection Cover 12 Gaskets Of / Lv / Iv / N Bushing Covers 13 Gaskets Of Ct Connection Plate Cover 14 Gaskets Of Prv Flange Of Main Tank 15 Gakets Of Main Oil Pipe Between Main Tank & Radiator 16 Buchholz Relay Gasket 17 Teflon Washer For Air Releasing Plug 18 Gaskets Of Oil Pipe Line Between Main Tank & Conservator 19 Gaskets Of Oil Surge Relay & Oil Pipe Line 20 Gaskets Of Oltc Top Plate 21 Gaskets Of Drain Valve / Sampling Valve 1 Dia Pipe 22 Gaskets Of Drain Valve 2 Dia Pipe 23 Gaskets Of Draib Valve 3 & 4 Dia Pipe Line 24 Gaskets Of Drain Valve 6 Dia Pipe Line 25 Gaskets Of 150Nb Oil Pump 26 Gaskets Of Flow Meter ( Indicator 10Mm Thickness ) 27 Gaskets Of Pipe Line Flange 100Mm 28 Radiator Gaskets ( 180 Mmx180 Mm Size In Square Shape ) 29 Radiaor Valves Gaskets ( 180Mm X180 Mm Size In Square Shape ) 30 Header Joint ( 440 Mm X440 Mm Size In Square Shape ) 31 Air Release Nylon Washer On Raditor Cap 32 Gaskets Of M.O.G Indicator 33 Gaskets Of Convertor Tank 34 Gaskets Of Nrv
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Uttar Pradesh View Result →
42.
Heavy Industries and Public Enterprises #9416607 Technical Bid
Procurement Of Pco2analyzer -Water Sampler , Pco2analyzer (Water Sampler) - As-P3 , Co2 Analyzer (Air Samples)-Li7815 , Temperature And Conductivity-Sbe-45 , Temperature And Wind Sensor- Airmar , Oxygen Sensors (Optode)- Do-4835 , Chlorophyl Sensor - Cyclops 7 , Turbidity Meter , Atmospheric Air Sampling -K8050-Atm , Bow -A900776 , Straps , Pump, Plumbing And Circuitry , Housing Assembly , Peripherals/ Associated System/ Sensors , Installation Materials & Accessories , System Cables/Cable Assemblies/Connector , Laptop/Pc With Software Lifetime License , On Board Spares For 2 Year , Special Tools And Test Equipment , Documentation , Service Engineer , Training , Warranty Extension For 1St Year After Expiry Of Initial 36 Months Warranty , Warranty Extension For 2Nd Year After Expiry Of Initial 36 Months Warranty => Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
West Bengal View Result →
43.
Health and Family Welfare #9415045 Technical Bid
Tender For Renovation Upgradation Works In Tdc; 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. 2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 4 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 5 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) 6 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification. 7 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 9 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) 10 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) 11 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 12 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 13 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 14 12 mm cement plaster: 1:4 (1 cement : 4 fine sand) 15 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) 16 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 17 Finishing with Epoxy paint (two or more coats) at all locations preparedand applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work 18 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work 19 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 20 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 21 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 22 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 23 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal ofunserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 24 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 25 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. 26 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 27 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 28 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. Pre-laminated particle board with decorative lamination on both sides 29 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight notless than 12.50 kg/ sqm) 30 Panelling 31 Providing, Fixing and Installation of Solid Double Skin Clean Room Wall cladding panels 80mm thick, Powder Coated (60-80 microns) Galvanized Iron sheet (hot dipped with zinc coating of 120gsm) on both side with Infill material as PIR (Density 40 kg/m3) with all required accessories like C Type Floor Track, Top Channels, male female channel etc with installation as per Thrislington Standards. Both side PCGI of size 0.6mm thick 32 One side SS-304 0.8mm/ One Side PCGI 0.6mm 33 Providing, Fixing and Installation of Solid Double Skin Clean Room Wall cladding panels 50mm thick, Powder Coated (60-80 microns) Galvanized Iron sheet (hot dipped with zinc coating of 120gsm) on both side with Infill material as PIR (Density 40 kg/m3) with all required accessories like C Type Floor Track, Top Channels, male female channel etc with installation as per Thrislington Standards.Both side PCGI of size 0.6mm thick 34 Providing, Fixing and Installation of Solid Double Skin Clean Room walkable ceiling panels80mm thick, Powder Coated (60-80 microns) Galvanized Iron sheet (hot dipped with zinc coating of 120 gsm) on both side with Infill material as PIR (Density 40 kg/m3) with all required accessories like Channels, male female etc including all trusses hanging arrangement as per load requirement with installation as per Thrislington Standards. Both side PCGI of size 0.6mm thick 35 COVING 36 Providing, Fixing and Installation of Aluminium Coving R-50 with Aluminum Backing (Powder Coated) 37 2D & 3 DCorners (Powder Coated) 38 Aluminium Coving R-50 with Aluminum Backing (Metallic Coated) 39 2D Corners (Metallic Coated) 40 3D Corners (Metallic Coated) 41 DOOR Providing, Fixing and Installation of Single DoorScientific Metal Doors designed to fit flush into the wall panel or brick wall. Doors are fabricated from GI sheet duly powder coated (thick 70- 80 micron with approved colour). Leaf having sheet thickness of 0.8mm and the frame of 1.2mm. Infill material will be Paper core with provisions for double glazing toughened glass 400*600mm and hardwares like door closure (SS ball bearing hinges, SS D handle 250mm with Push plate, Dead lock both side key operated) Aaditya Make or equivalent, Drop Sael and Door Seal D type, SS kick plate 300mm height and concealed tower bolt for the double door etc. 42 Single Leaf Door of size 750 x2100mm 43 Single Leaf Door of size900 x 2100 mm 44 Single Leaf Door of size900 x 2200 mm 45 Single Leaf Door of size 900 x 1950 mm 46 Single Leaf Door of size 1000 x 2100 mm 47 Single Leaf Door of size 1000 x 2200 mm 48 Single Leaf Door of size 1000 x 2050 mm 49 Single Leaf Door of size 1200 x 2600 mm with DOP 50 Single Leaf Door of size 900 x 2600 mm with DOP 51 Double Leaf Door of size 1500 x 2100 mm 52 Single Door 750*2100 Emergency Exit Door with Panic Bar withhardwares like door closure, SS304 ball bearing hinges, panic bar, Drop Seal, Door seal SS304 kick plate 300mm height etc 53 Single Leaf Door of size 900 x 2600mm with DOP 54 VIEW PENELDouble glazed view panels in wall partitions with flush design fixed with 5mm thick toughened glass, fixed with DA Tape and gap filling, finished with black silicon sealant. Size - 1000*1000mm 55 Hardware for DoorsReturn Air RiserProviding & fixing GI return air riser inside 80 mm thk wall panels. RA duct will extend 150 mm above walk on ceiling with a flanged connection to main Duct by others. Riser will be provided with SS-304 1.2mm thk Perforated Grill.Solid Area will be considered in wall panel area.(With Filter and Damper) 56 Both side PCGI of size 0.6mm thick 57 one side SS-304 0.8mm/ One Side PCGI 0.6mm 58 Double glazed Vision Panel (With SS Capping) 59 Providing, Fixing and Installation of Double Glaze Vision Panelwith 2 x 6 mm thick Clear Toughened glass with 20mm black border with all accessories like double adhesive tape, silicon sealant and silica gel with 0.8 mm GI powder coated inner channel with installation as per Thrislington Standards.(Max. Jamb 80mm) Size 1000 x 1000 mm 60 Cutouts 61 Wall Cutouts for Electrical Fittings (Factory Made) 62 Ceiling Cutouts for Electrical Fittings (Factory Made) 63 Pass Box Cutouts (Factory Made) 64 25mm Dia. MS conduit pipe 65 L Flushing PCGI (50X360MM) 66 L Flushing SS304 (50X360MM) 67 TRUSSES FOR HANGINGARRANGEMENTS T-type MS truss with threaded rod hanger 68 Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed steel conduit, with pianotype switch, phenolic laminated sheet, suitable size MS box andearthing the point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable etc. as required. Group B 69 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 70 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mmFRLS PVC insulated copper conductor single core cable for loopearthing as required. 71 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 A TP&N 72 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A, 16 KA,TPMCCB 73 315 A, 35 KA,TPMCCB 74 Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing andcommissioning etc.as required.For 4 way, Double door TPN MCBDB 75 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DBcomplete with connections, testing and commissioning etc. as required.25 A 76 63 A 77 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors,suspended from the ceiling with M.S. suspenders including bolts& nuts, painting suspenders etc as required. 300 mm width X 62.5 mm depth X 2.0 mm thickness 78 600 mm width X 75 mm depth X 2.0 mm thickness 79 Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 62.5 mm depth X 2.0 mm thickness 80 600 mm width X 75 mm depth X 2.0 mm thickness 81 Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 62.5 mm depth X 2.0 mm thickness 82 600 mm width X 75 mm depth X 2.0 mm thickness 83 Supply, installation, testing and commissioning of followingsizes of cu/ GIstrip/wireclampedto walls,cable trays,busducts, cables, in recess (including cost of digging & backfilling) or on surfaceetc for equipment/ System / Lightning protectionearthing completeas required including interconnectionbetween lengthatjoints, allfixing accessoriessaddles, clamps, test joints etc.andother fixing hardware material as required for proper installation.25 x 5 mm strip of Copper 84 Earthing with copper earth plate 600 mm X 600 mm X 3 mmthick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 85 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. 86 Supplying and making end termination with brass compression gland and copperlugs for following size of PVC insulated PVC sheathed/XLPE copper conducter cable of 1.1 kV grade as required. 4 C x 10 sq.mm 87 Main LT Panel a)Main Incomer - 01 No. (b)MCCB 630A 4P 55KA TMR with O/L & S/C Prot -1 (c)Spreader Links - 02 Nos. (d)Rotary Handle - 1 No.(e)Digital MFM Meter - 1 No. (f)Phase Indicating Lamps, LED Type - R-Y-B - 3 Nos. (g)MCB 6A SP 10 kA `C Curve - 3 Nos. (h)600/ 5A, CL-1.0, 15 VA, Tap Wound CT for Metering - 3 No. (i)CT Shorting Link - 4 Nos (j)Neutral Link - 01 No.(k)Outgoing Feeder (l)MCCB 400A for G.F. Distribution Panel -1(m)MCCB 400A 4P 36KA TMR with O/L & S/C Prot -1 No.n)Spreader Links - 02 Nos.(o)Rotary Handle - 1 No. (p)MCCB 125A 4P for F.F. Distribution Panel - 1 No.(q)MCCB 125A 4P 36KA TMR with O/L & S/C Prot -1 No.(r)Spreader Links - 02 Nos.(s)Rotary Handle - 1 No.(t)MCCB 63A 4P for Clean Room - 1 No.(u)MCCB 63A 4P36 kA TMR with O/L & S/C Prot.- 1 No.(v)Spreader Links - 02 Nos.(x)Rotary Handle - 1 No.(y)MCCB 100A 4P for Spare - 1 No.(z)MCCB 100A 4P 36KA TMR with O/L & S/C Prot -1 (aa)Spreader Links - 02 Nos.(ab)Rotary Handle - 1 No. (ac)MCB 63A 4P for Spare - 3 No.(ad)MCB 63A 4P 10kA `C Curve- 3 Nos. (ae)MCB 32A 4P for Spare - 3 No.(af)MCB 63A 4P 10kA `C Curve- 3 Nos.(ag)Aluminium Main Busbar, Dropper and Input & Outpur Links with Heat Shrink Sleeve(ah)Busbar will be electrolytic E-91 High Grade with current rating of 0.8 sqmm :- 800A including earthing & neutral busbar with heat shrink colour coated sleeve - 01 No.(ai)Busbar will be electrolytic E-91 High Grade with current rating of 0.8 sqmm :- 800A including earthing & neutral busbar with heat shrink colour coated sleeve - 01 No.(aj)Hardware (ak)GI Nut, Bolt, Plain and spring washer, DMC Busbar supports etc. - 1 No. (al) MS Enclosure - W-2100MM H-1775MM D-500MM (am)Panel will be fabricated with CRCA sheet 2/1.6mm duly powder coated with RAL 7035 siemens grey paint free standing indoor floor mounting type compartmentalized dust & vermin proof including gland plates, MS channels, MS Partitions, self adhesive rubber gaskets, door hinges, lifting hooks, panels locks with open/ close sticker, rubber grommets, danger plates, insciption name plates and wires for door earthing with thimbles - 01 No. (an)Power & Control Wiring(ao)Power & Control wire including timble, ferrules, tie PVC/ MCB, channels and end plates etc. - 01 No. 88 PDB Panel (Ground Floor) (a)Main Incomer - 01 No. (b)MCCB 400A 4P 36kA TMR with O/L & S/C Prot -1 No. (c)Spreader Links - 02 Nos.(d)Rotary Handle - 1 No.(e)Digital Amp Meter 0-400 A with ASS 1 No.(f)Digital Volt Meter 0-500 A with VSS 1 No. (g)Phase Indicating Lamps, LED Type - R-Y-B - 3 Nos. (h)MCB 6A SP 10 kA `C Curve - 3 Nos.(i)400/ 5A, CL-1.0, 15 VA, Tap Wound CT for Metering - 3 No.(j)CT Shorting Link - 4 Nos(k)Neutral Link - 01 No.(l) Outgoing Feeder (m)MCCB 125A 4P for Chiller Plant and Brine Plant 50 HP -2 Nos. (n) MCCB 1254P 36 kA TMR with O/L & S/C prot. - 2 Nos. (o) Spreader Links - 04 Nos. (p) Rotary Handle - 2 No.(q) MCB 40A 4P for for Distribution Pump, cooling Tower, Centrifuge, 250 ltr, reactor, 250 ltr blender, AHU 1, AH-4 and AHU-6 - 8 Nos (r) MCCB 40A 4P 10KA `C Curve - 08 Nos (s) MCB 25A 4P forVaccum Pump, Tray Dryer 24 Tray, VTD 24 TRAY, WH sampling booth and - 5 Nos. (t) MCB 25A 4P 10KA `C Curve - 5 Nos. (u) MCB 32A 4P forAHU 2, 3 & 5 -3Nos.(v) MCB 32A 4P 10KA `C Curve - 3 Nos.(x) MCB 63A 4P for Lighting & Spare - 4 No. (y) MCB 63A 4P 10 kA `C Curve- 4 Nos. (z) MCB 32A 4P for Lighting & Spare - 4 No. (aa) MCB 32A 4P 10kA `C Curve- 4 Nos.(ab) Aluminium Main Busbar, Dropper and Input & Outpur Links with Heat Shrink Sleeve - 01 No. (ac) Busbar will be electrolytic E-91 High Grade with current rating of 0.8 sqmm :- 500A including earthing & neutral busbar with heat shrink colour coated sleeve - 01 No. (ad) Hardware (ae) GI Nut, Bolt, Plain and spring washer, DMC Busbar supports etc. - 1 No.(af) MS Enclosure - W-2100MM H-1675MM D-500MM (ag) Panel will be fabricated with CRCA sheet 2/1.6sqmm duly powder coated with RAL 7035 siemens grey paint free standing indoor floor mounting type compartmentalized dust & vermin proof including gland plates, MS channels, MS Partitions, self adhesive rubber gaskets, door hinges, lifting hooks, panels locks with open/ close sticker, rubber grommets, danger plates, insciption name plates and wires for door earthing with thimbles. (ah) Power & Control WiringPower & Control wire including timble, ferrules, tie PVC/ MCB, channels and end plates etc. - 01 No. (ai) Power & Control wire including timble, ferrules, tie PVC/ MCB, channels and end plates etc. - 01 No. 89 PDD Panel (First Floor) (a) Main Incomer - 01 No. (b) MCCB 125A 4P 36kA TMR with O/L & S/C Prot -1 No. (c) Spreader Links - 02 Nos. (d) Rotary Handle - 1 No. (e) Digital Amp Meter 0-125 A with ASS 1 No. (f) Digital Volt Meter 0-500 A with VSS 1 No. (g) Phase Indicating Lamps, LED Type - R-Y-B - 3 Nos. (h) MCB 6A SP 10 kA `C Curve - 3 Nos. (i) 150/ 5A, CL-1.0, 15 VA, Tap Wound CT for Metering - 3 No. (j) CT Shorting Link - 4 Nos (k) Neutral Link - 01 No. (l) Outgoing Feeder (m) MCCB 63A 4P for 20 KW- 01 No. (n) MCCB 63A4P 36 kA TMR with O/L & S/C prot. - 1 No. (o) Spreader Links - 02 Nos. (p) Rotary Handle - 1 No. (q) MCB 63A 4P forLighting & Spare - 2 Nos (r) MCB 63A 4P 10KA `C Curve - 02 Nos (s) MCB 32A 4P for Lighting & Spare - 2 No. (t) MCB 32A 4P 10 kA `C Curve- 2 Nos. (u) MCB 20A 4P for Fume Hood -5Nos. (v)MCB 20A 4P 10KA `C Curve - 5 Nos.(x) Aluminium Main Busbar, Dropper and Input & Outpur Links with Heat Shrink Sleeve- 01 No. (y) Busbar will be electrolytic E-91 High Grade with current rating of 0.8 sqmm :- 500A including earthing & neutral busbar with heat shrink colour coated sleeve - 01 No. (z) Hardware (aa) GI Nut, Bolt, Plain and spring washer, DMC Busbar supports etc. - 1 No. (ab) MS Enclosure - W-1200MM H-1575MM D-300MM (ac) Panel will be fabricated with CRCA sheet 2/1.6sqmm duly powder coated with RAL 7035 siemens grey paint free standing indoor floor mounting type compartmentalized dust & vermin proof including gland plates, MS channels, MS Partitions, self adhesive rubber gaskets, door hinges, lifting hooks, panels locks with open/ close sticker, rubber grommets, danger plates, insciption name plates and wires for door earthing with thimbles. (ad) Power & Control Wiring (ae) Power & Control wire including timble, ferrules, tie PVC/ MCB, channels and end plates etc. - 01 No 90 3 HP DOL Starter for Fume Hood - 01 No. a) MCB 20A TP 10 kA `C Curve - 01 No. (b)12A TP AC 3 duty power contactor - 01 No. (c)Aux. Contact Block 1 No. + 1 NC - 01 No. (d)MCB 6 A SP 10kA `C Curve - 01 No.(e)ON/OFF/TRIP indicating lamp - 03 Nos. (f)Start/ Stop push button - 02 Nos. (g)A/M Selector switch - 1 No.(h)O/L Rely 3.5 - 5A - 1 No. (i)Single Phase Preventer - 01 No. (j)Power & Control terminal block - 01 No. (k) MS Enclosure - W-500MM H-500mm D-300MM (l) Panel will be fabricated with CRCA sheet 2/1.6sqmm duly powder coated with RAL 7035 siemens grey paint free standing indoor floor mounting typecompartmentalized dust & vermin proof including gland plates, MS channels, MS Partitions, self adhesive rubber gaskets, door hinges, lifting hooks, panels locks with open/ close sticker, rubber grommets, danger plates, insciption name plates and wires for door earthing with thimbles. - 01 No. (m) Power & Control Wiring(n) Power & Control wire including timble, ferrules, tie PVC/ MCB, channels and end plates etc. - 01 No. 91 (o) Flame Proof Push Button ON/ OFF indicator, RPM indicator & PH Meter 92 (p) Flame Proof Light (600mm x 300mm) with gland, rotary switch & power plug 93 (q)Light 600 mm x 600 mm 94 (r)Light 300 mm x 300 mm 95 (23) Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.4 x 1.5 sq. mm 96 4 x 2.5 sq. mm 97 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (Flame Proof) 16A Switch & Socket (Flame Proof) 98 32A Switch & Socket (Flame Proof) 99 RTD Sensor 100 Socket Box with SS Plate 101 INTELLIGENT FIRE ALARM SYSTEMSupplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Makes : Cerberus Pro by Seimen/ Ansul / Bosch / Notifier.1 Loop Panel. 102 Supply and Installation of smoke detector. 103 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 104 Supply and Installation of Heat Detectors 105 Supplying, installation, testing & commissioning of addressable fire control module complete as required.Makes : Cerberus Pro by Seimen/ Ansul / Bosch / Notifier. 106 Supply and Installation of MCP 107 Supply and Installation of hooters with flashers 108 CABLING & WIRING Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Makes :lap/ Finolex/ RR Kabel 109 Supply and Installation of Fire Extinguishers ABC 6 Kgs. 110 Supply and Installation of Fire Extinguishers CO2 4.5 kg 111 Supply and Installation of Fire Extinguisher Foam Type 9 ltrs 112 Supply and Installation of Fire Extinguishers Modular type 5 Kg clean Agent Gas
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Punjab View Result →
44.
Educational and Research Institute #9407553 AOC
supply of Medicine And Consumable Items , Medicine / Consumable Items / X-Ray Items / Suture Items , 0.035 Coaxial Delivery Catheter 0.035 Distal Jd Coaxial Delivery Catheter Should Be Dgci And Usfda Approved , 0.068’’ Reperfusion Catheter 6F Proximal And Distal Od, 0.068’’ Proximal And Distal Id Should Be Dgci And Usfda Approved , 1.3 / 1.4 A Adult Dialyzer ( Dialyzer- Multiple Use ) , 2 Octyl Cynoacrylate Topical Skin Adhesive 0.5Ml Pen Shaped , 2 Octyl Cynoacrylate Topical Skin Adhesive 0.5Ml Vial , 2-Octyl Cyanoacrylate Liquid Topical Skin Adhesive Packaged Within A Pen Applicator Along-With A Self-Adhering Mesh Of 22Cm , 2-Octyl Cyanoacrylate Liquid Topical Skin Adhesive Packaged Within A Pen Applicator Along-With A Self-Adhering Mesh Of 60Cm , 9.0 Fr, Single Lumen Catheter With Surecuff Tissue Ingrowth Cuff Percutaneous Introducer System ( Peel-Apart ) , Apositioning System For Lap Ventral Hernia Consisting Of A Echo Ps Balloon For Positioning With An Uncoated Light Weight Polypropylene Mesh On One Side And An Absorbable Hydrogel Based Barrier With Bio Resorbable Pga Fibres Based On Sepra Technology On The Other.Various Sizes ( 4.5 / 4.6 / 6 / 6*8 ) , A.V Blood Lines With Av Pressure Transducer Protector For All Machine Types And Dialysizer ( Acceptable For Fitting To All Standard Dializer ) , Set , A.V Fistula Needle 16 G , A.V Fistula Needle 17 G , Abatacept 250Mg. Inj. , Abdaminal Binder 28No. , Abdaminal Binder 30No. , Abdaminal Binder 32No. , Abdaminal Binder 34No. , Abdaminal Binder 36No. , Abdaminal Binder 38No. , Abdaminal Binder 40No. , Abdaminal Binder 42No. , Abdominal Drainage Kit ( Adk Drain ) ( Size - 20, 24, 28, 32 No. ) , Abdominal Drainage Kit 28, 30, 32, 34 , Abdominal Drainage Kit; 16 Size, 2Litre Bag Capacity , Abdominal Drainage Kit; 22 Size, 2Litre Bag Capacity , Abdominal Dressing With Viceral Protective Layer For Compartment Syndrom To Reduce Medial Tension, Ce Certified, Forthird Generation Npwt System, 66.5*80.2 Cm , Abg Sampling Syringe With Pre Heparin Dry Lithium ( 23.5 Iu / Ml ) , Above 40 Microns Sterile , Abscess / Bilary Drinage Catheter ( Pigtail ) With Needle , Abscess / Biliary Drinage Catheter ( Straight ) , Abscess / Biliary Drinage Catheter ( Pigtail ) , Abscess Biliary Drinage Sets Pigtail Type , Abscess / Biliary Drinage Sets Malecot Type , Absolute Ethanol100 Mlsolutions , Absorbable Adhension Prevention Orc Knitted Film 3X4 , Absorbable Gelatin Based Topical Absorbable Flowable Hemostat With 6Cc Syringe Pre-Filled With Hemostatic Matrix. With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexible Applicator Tip , Absorbable Gelatin Based Topical Absorbable Flowable Hemostat With 6Cc Syringe Pre-Filled With Hemostatic Matrix. With 14.3 Cm White Applicator Tip & 14.6 Cm Blue Flexible Applicator Tip , Absorbable Gelatin Spongeu.S.P Regular80mmx 50Mmx10mm ( 2 Pcs. Packet ) , Absorbable Gelatin Sponge Based Topical Absorbable Hemostat Without Formaldehyde. Should Be Sterilized By Dry Heat, 20Cmx7cmx0.05Cm. , Absorbable Gelatin Sponge Based Topical Absorbable Hemostat Without Formaldehyde. Should Be Sterilized By E-Beam Irradiationm 0.3X8cm , Absorbable Gelatin Sponge Should Not Be Cross Linked By Formaldehyde. Should Be Sterilized By Dry Heat, 7Cm X 5Cm X 1Cm. , Absorbable Hemostat Powder With Microporous Polysaccharide Hemosphere ( Mph ) Technology In One Single Sterile Pack For 5Gm In Bellow Applicator , Absorbable Hemostat Powder With Mph ( Microporous Polysaccharide Hemosphere ) Technology In One Single Sterile Pack Of 1Gm In Bellow Applicator-Us Fda Approved , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 0, 1 / 2 Circle Taper Point, 30Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 0, 1 / 2 Circle Taper Point, 45Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 2-0, 1 / 2 Circle Taper Point, 30Cm, 26Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 2-0, 1 / 2 Circle Taper Point, 30Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 2-0, 1 / 2 Circle Taper Point, 45Cm, 37Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 3-0, 1 / 2 Circle Taper Point, 45Cm, 26Mm. Unidirectional , Absorbable Surgical Needled Suture ( Synthetic ) Knotless Tissue-Closure Device Monofilament Polydioxanone - Barbed Suture With A Triangular Stopper Size- 3-0, 3 / 8 Circle Rc, 45Cm, 19Mm. Unidirectional , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4204 Size : 2-0, Chromic-Straight R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4205 Size : 0, Chromic-Straight R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4208 Size : 2-0, Chromic-Straight R B, 50Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4213 Size : 0, Chromic-Straight R B, 60Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4216 Size : 2-0, Chromic-3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4217 Size : 0, Chromic-3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4220 Size : 2-0, Chromic-3 / 8 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4221 Size : 0, Chromic-3 / 8 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4225 Size : 0, Chromic-3 / 8 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4275 Size : 1, Chromic-1 / 2 Circler B & 1 / 2 Circle R C Da, 45Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4276 Size : 0, Chromic-1 / 2 Circler B &1 / 2 Circle R C Da, 45Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4277 Size : 2-0, Chromic-1 / 2 Circler B &1 / 2 Circle R C Da, 36Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4278 Size : 2, Chromic-1 / 2 Circle R B, 65Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4279 Size : 0, Chromic-1 / 2 Circle T C Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4280 Size : 4-0, Chromic-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4281 Size : 5-0, Chromic-3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4288 Size : 3-0, Plain-Straight Cutting, 60Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4295 Size : 2-0, Chromic-1 / 2 Circle R B, 38Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4296 Size : 0, Chromic-1 / 2 Circle R B, 38Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4297 Size : 1, Chromic-1 / 2 Circle T C Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4297A Size : 1, Chromic-1 / 2 Circle T C Heavy, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4826 Size : 1, Chromic-3 / 8 Circle R B D A, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5007 Size : 3-0, Plain-Straight R B, 50Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5010 Size : 3-0, Plain-3 / 8 Circle Cutting, 22Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5020 Size : 3-0, Plain-3 / 8 Circle Cutting, 26Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5033 Size : 2-0, Plain-3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 5048 Size : 4-0, Chromic-3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures4237 Size : 3-0, Chromic-1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2003 Ldl Size : 2-0, 1 / 2 Circle Cutting 30Mm, Da, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2214 Size : 0, Chromic-1 / 2 Circle R B, 30Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2215 Size : 1, Chromic-1 / 2 Cirle R B Heavy, 40Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 2216 Size : 2, Chromic-1 / 2 Circle R.B.Mayo, 45Mm, 152Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4113 Size : 2-0, Chromic-3 / 8 Circle R B, 32Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4114 Size : 0, Chromic-3 / 8 Circle R B, 32Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4123 Size : 2-0, Chromic-1 / 2 Circle R B, 26Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4124 Size : 0, Chromic-1 / 2 Circle R B, 26Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4200 Size : 2-0, Chromic-Straight R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4201 Size : 3-0, Chromic-3 / 8 Circle Cutting, 22Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4226 Size : 1, Chromic-3 / 8 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4226T Size : 1, Chromic-3 / 8 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4227 Size : 1, Chromic-1 / 2 Circle R B Mayo, 45Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4228 Size : 2, 1 / 2 Circle Rb 45Mm Mayo, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4229 Size : 0, Chromic-1 / 2 Circle R B Mayo, 45Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4232 Size : 2-0, Chromic-3 / 8 Circle R B, 65Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4233 Size : 0, Chromic-3 / 8 Circle R B, 65Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4237 Size : 3-0, Chromic-1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4238 Size : 3-0, Plain-1 / 2 Circle R B, 25Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4239 Size : 1, Chromic-1 / 2 Circle Tr P Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4241 Size : 2-0, Chromic-1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4242 Size : 0, Chromic-1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4244 Size : 2, Chromic-1 / 2 Circle Tr P Heavy, 40Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4245 Size : 2-0, Chromic-1 / 2 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4246 Size : 0, Chromic-1 / 2 Circle R B, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4248 Size : 1, Chromic-1 / 2 Circle R B Heavy, 50Mm, 100Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4249 Size : 2-0, Chromic-1 / 2 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4250 Size : 0, Chromic-1 / 2 Circle R B, 45Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4255 Size : 2-0, Chromic-1 / 2 Circle Cutting Heavy, 30Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4258 Size : 0, Chromic-1 / 2 Circle R B Heavy, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4259 Size : 1, Chromic-1 / 2 Circle R B Heavy, 40Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4262 Size : 1, Chromic-3 / 8 Circle Cutting, 60Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4264 Size : 0, Chromic-5 / 8 Circle R B, 35Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4267 Size : 1, Chromic-3 / 8 Circle R B Blunt, 63Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4268 Size : 5-0, Chromic-3 / 8 Circle R C , 12Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4269 Size : 5-0, Plain-3 / 8 Circle R C , 12Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4270 Size : 4-0, Plain-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4271 Size : 3-0, Plain-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4272 Size : 3-0, Chromic-1 / 2 Circle R C, 12Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4273 Size : 1, Chromic-1 / 2 Circle R C, 50Mm, 76Cm 1 Foils , Absorbable Surgical Suture U.S.P, Catgut ( Chromic / Plain ) With Needle, Sterilised Surgical Sutures 4274 Size : 3-0, Chromic-3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 26Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 36Mm 1 / 2 Circle Reverse Cutting Os-6 Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 36Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 40Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 48Mm 1 / 2 Circle Taper Point Ethiguard Safety Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 0, 48Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 36Mm 1 / 2 Circle Reverse Cutting Os-6 Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 36Mm 1 / 2 Circle Taper Point Ethiguard Safety Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 36Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 40Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 48Mm 1 / 2 Circle Taper Point Ethiguard Safety Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 1, 48Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 2-0, 26Mm 1 / 2 Circle Taper Point Ct-2 Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 2-0, 26Mm 1 / 2 Circle Taper Point Sh Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 2-0, 36Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 3-0, 19Mm 3 / 8 Circle Reverse Cutting Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 3-0, 24Mm 3 / 8 Circle Reverse Cutting Needle, 45 Cm , Absorbable Unidirectional Barbed Device, Symmetric Anchoring Pattern, Triclosan Coated Polydioxanone, Size 3-0, 26Mm 1 / 2 Circle Taper Point Needle, 45 Cm , Absorbent Cotton Roll 100 Gm Each Consumable , Absorbent Cotton Wool Ip 500 Grms. , Aceborophylline 100 Mg Cap , Aceclofenac 200 Mg+Cyclobenzaprine 15Mg Tab. , Aceclofenac 200 Mg+Thiocolchicoside 16 Mg Tab. , Aceclofenac Ip 1.5%W / W + Linseed Oil 3.0%W / W + Capsaicin 0.025%W / W + Methyl Salicylate I Ip 10%W / W + Menthol Usp / Bp 5%W / W + Benzyl Alcohol 1%W / W - 30Gm Ointmentointment , Acitrom 2Mg Tablets , Actinomycin-D ( 0.5Mg Vial ) , Vial , Acyclovir 0.5 %W / Wointment , Acyclovir Ip- 400Mg / 5Ml ( 100Ml Bottle ) Syp , Acyclovir Ip- 800Mg Tab. , Adapalene 1 %W / W Gel , Adhesion Barrier Matrix2x2 Inch 2X2 Inch , Adhesion Barrier Matrix3x3 Inch 3X3 Inch , Adhesion Barrier Matrix ( 1X1 ) . , Adhesion Barrier Matrix ( 1X3 ) . , Adhesion Barrier Matrix ( 2X2 ) . , Adhesion Barrier Matrix ( 3X3 ) . , Adhesion Barrier Matrix ( 4X5 ) . , Adhesion Barrier Matrix 1X1 Inch , Adhesion Barrier Matrix 1X3 Inch , Adhesion Barrier Matrix 4X5 Inch , Adhesive Plaster 10 Cm X 8 Mtrs Each Roll , Adhesive Plaster 7.5 Cm X 10 Mtrs Each Roll , Adhesive Plasters Usp 7.5 Cm X 5 Mts / Roll , Adrenaline 0.005 Mg+ Lignocaine 2 %W / V Injection , Adrenochrome Monosemicarbazone0.75 Mg.Ml 2Ml Amp. Inj. , Adultarterial Filter Withbypass Loopthe Arterial Filter Should Be For Adult Use. Priming Volume Should Not Be More Than 120Ml Filter Pore Size Should Be 30- 40 Micron. The Outlet And Inlet Blood Posts Should Be 3 / 8 Or 3 / 8. The Filter Should Allow Maximum Blood Flow Rate Of 4.0 To 6.0 L / Min The Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Adult Arterial Cannulae For Arch Cannulation Dlp Metal Tip Curved Arterial Cannulae Without Vented 3 / 8 Inch Connector, Sizes- 20, 22, 24 , Adult Arterial Cannulaefor Arch Cannulation. Dlp Straight Tip Arterial Cannulae, Connection Site 3 / 8 Inch, Sizes -16, 18, Fr , Adult Double Lumen Catheter Setfr-12 Fr, 16 Cm ( Curved ) , Adult Double Lumen Catheter Set Fr-12 Fr, 13 Cm. ( Curved ) , Adult Double Lumen Catheter Set Fr-12 Fr, 13 Cm. ( Straight ) , Adult Double Lumen Catheter Set Fr-12 Fr, 16 Cm ( Straight ) , Adult Penile Clamp; Made Of Soft Material, Reusable And Washable , Advance Bipolar Hand Activated Probe For Open Surgery With 13Mm Shaft Diameter And 20 Cm Shaft Length, 6 Mm Wide Straight Jaw Design With Jaw Length Of 38 Mm , Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy , Having Separate Seal And Cut Buttons, Capable Of 360 Degrees Rotation , Advanced Rf Energy Hand Instruments Of 12Mm Shaft Diameter For Open Procedureswith Shaft Lengths 22Cm And Should Be Both Hand & Foot Activated. Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 35Cm With 55 Degree Articulation And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Laparoscopic Procedures With Shaft Lengths 45Cm And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedures With Shaft Lengths 14Cm And Should Be Both Hand & Foot Activated. Compatible With Gen 11 , Advanced Rf Energy Hand Instruments Of 5Mm Shaft Diameter For Open Procedureswith Shaft Lengths 25Cm And Should Be Both Hand & Foot Activated With Curved Tip.Compatible With Gen 11 , Aicd Device+ Leads ( Fda Approved Not Ce Approved ) , Air Mattress , Albendazole Tab ( 200 Mg ) , Tablet , Albumin 25% Injection , Aldehyde Free Instand Surface Disinfectant Low Lintwipe, Size 12 X 12.5 Inches In Bucket Each 100Gms Contanins- 1 Propanol 6Gm 2 Orioabik 9Gms Abd Etgabik 10Gms , Aldehyde Free Surface Disinfactant Cleaner ( Conc. ) With Material Protection Factor Containing Dodecylbispropylene Triamine 5 Gm With Surfactants, Antifoaming Agents 500 Ml Solution , Alendronate 70 Mg Tab. , Alkyldimethyl Benzyl Ammonium Chloride ( Bkc ) I.P- 13.80%W / V, Didecyl Dimethyl Ammonium Chloride - 9.2% , Alkyldimethyl Benzyl Ammonium Chloride ( Bkc ) Ip- 13.6% W / V, Didecyl Dimethyl Ammonium Chloride 13.0% W / V, Polymeric Biguanide Hydrochloride ( Phmb ) - 5.0% , All Human ( Bovine Aprotinin Free ) Fibrin Sealant - 1Mla Package ( Different Skus - 1Ml, Containing : One Vial Of Bac2 ( 50-90 ) Mg / Ml Fibrinogen ) And Thrombin ( 800-1200Iu / Ml Human Thrombin ) Frozen Solutions All Human Formulation Free Of Bovine Aprotinin Triple-Lumen Tip To Prevent Clogging Inside The Applicator Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures Maintains Predictable Fibrinogen Ratio Within Physiologic Ranges , All Human ( Bovine Aprotinin Free ) Fibrin Sealant - 2Mla Package ( Different Skus - 1Ml, Containing : One Vial Of Bac2 ( 50-90 ) Mg / Ml Fibrinogen ) And Thrombin ( 800-1200Iu / Ml Human Thrombin ) Frozen Solutions All Human Formulation Free Of Bovine Aprotinin Triple-Lumen Tip To Prevent Clogging Inside The Applicator Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures Maintains Predictable Fibrinogen Ratio Within Physiologic Ranges , All In One Hand Control Device For Laparoscopic Suction, Irrigation, , Cut, Coag Assembly , All In One Ptfe Coated Ez Clean Laparoscopic Electrosurgical Electordes Compatible With All In One Hand Control Device , All-Human ( Bovine Aprotinin Free ) Fibrin Sealant , All-Human Formulation Free Of Bovine Aprotinin , Alprostadil ( Prostaglandin E1 ) Usp 500Mcg / 1Ml Inj. , Alteplase 50Mg.Inj. , Aluminium Hydroxide + Aluminium Hydroxide + Magnesium Hydroxide + Simethicone 200Ml Syp. , Ambo Bag Silicone Ruber Complete Set All Size , Ambo Lmadisposable Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. Sizes- 1, 2, 3, 4 5, 6 , Ambo Lma Reusable Second Generation With Gastric Drain Tube And Reinforcement Airway Tube. Sizes- 1, 2, 3, 4, 5, 6 , Ambu Bag Adult ( Silicon ) , Ambu Bag Child ( Silicon ) , Amikacin + Dexa5gm. Ointment , Amikacin + Dexa 5Ml 5Ml Eye Drop , Amikacin Eye Dropeye Drop , Amino Acid 10% 500Ml With Taurine ( 51G ) Without Sorbitol & Xylitol Iv , Amino Acid 5% 250Ml Without Sorbitol ( 12.5G ) Iv , Amino Acid With Tauin 500Ml Ffs Bottle 500Ml ( 10% ) Iv , Aminoacid ( Essential ) Infusion ( 10% 100Ml Ffs Bottle ) , Bottle , Aminoacid 5% - Ivf ( 100Ml Bottle ) , Infusion , Aminocaproic Acid 5 Mg Inj. , Aminophylline 250 Mg / 10 Ml Vial Injection , Aminophylline 25Mg / Ml 10Ml Amp Inj. , Amiodarone 150Mg Tablets , Amipriprazol-10Mg. Tab. , Ammoidine 0.75 Solution , Ammoidine0.75%+Amminobenzoic Acid2% ( Melanocyl Ointmentment ) Ointment , Amniotomy Spike Cot. Inbuilt With Plastic Hook, Sterilized Single Pack . , Amoxicillin Cloxacillin And Lactic Acid Bacillus Capsules 250Mg , Amoxycylline+ Cloxacillinic 125Mg / 31.25Mg ( 30Ml ) Syp. , Ampicillin Trihydrate- 500Mgcap. , Amplatz Extra Stiff Guide Wire , Amplatz Extra Stiff Guide Wire Floppy Tip 0.035X150 & 260 Cm , Amplatz Extra Stiff Guide Wire J Tip 0.035X150 & 260 Cm , Amplatz Sheath With Dilator, No.20 , Amplatz Sheath With Dilator, No.26 , Amplatz Sheath With Dilator, No.28 , Amplatz Sheath With Dilator, No.30 , Analyser Cell Counter Printing Roll 5Cm. , Anattomical Facemask With Inflatable Seal Size 0 , Anattomical Facemask With Inflatable Seal Size 00 , Anattomical Facemask With Inflatable Seal Size 00, 0, 1, 2, 3, 4, 5 , Anattomical Facemask With Inflatable Seal Size 1 , Anattomical Facemask With Inflatable Seal Size 2 , Anattomical Facemask With Inflatable Seal Size 3 , Anattomical Facemask With Inflatable Seal Size 4 , Anattomical Facemask With Inflatable Seal Size 5 , Anesthesia Breathing Circuits - 16 - 40 ( 41Cm - 101Cm ) Adult Expandable Circuits . , Anesthesia Breathing Circuits - 20-40-60 ( 51 Cm-101 Cm-152 Cm ) Segmented Expandable Extension Set . , Anesthesia Breathing Circuits - 33-87 ( 84 Cm-221 Cm ) Adult Expandable Circuits . , Anesthesia Breathing Circuits - 72 ( 183 Cm ) Adult Circuits With Gas Sampling Connectors . , Anesthesia Silicon Airwaysize - 000, 00, 0, 1, 2, 3, 4, 5, 6 , Angio Kit , Angiographic Catheters 5F Al 1.0 , Angiographic Catheters 5F Al 2.0 , Angiographic Catheters 5F Ar 1.0 , Angiographic Catheters 5F Ar 2.0 , Angiographic Catheters 5F Ima 1.0 , Angiographic Catheters 5F Jl 3.0 , Angiographic Catheters 5F Jl 3.5 , Angiographic Catheters 5F Jl 4.0 , Angiographic Catheters 5F Jr 3.5 , Angiographic Catheters 5F Jr 4.0 , Angiographic Catheters 5F Mpa 1.0 , Angiographic Catheters 5F Ntr , Angiographic Catheters 5F Pigtail 110Cm , Angiographic Catheters 5F Pigtail 150Cm , Angiographic Catheters 5F, 6F , Angiographic Catheters 5Ftig 1 , Angiographic Catheters 6F Al 1.0 , Angiographic Catheters 6F Al 2.0 , Angiographic Catheters 6F Ar 1.0 , Angiographic Catheters 6F Ar 2.0 , Angiographic Catheters 6F Ima 1.0 , Angiographic Catheters 6F Jl 3.5 , Angiographic Catheters 6F Jl 4.0 , Angiographic Catheters 6F Jr 3.5 , Angiographic Catheters 6F Jr 4.0 , Angiographic Catheters 6F Mpa 1.0 , Angiographic Catheters 6F Ntr , Angiographic Catheters 6F Pigtail 110Cm , Angiographic Catheters 6F Pigtail 150Cm , Angiographyintroducer Set 5, 6, 7, 9 Fr With 15 & 23 Cm , Angiographyintroducer Sheath 5, 6 , 7, 9 Fr 15 Cm, 23Cm , Angiojet Boston , Ankle Brace S / M / L , Ankle Wrap S / M / L , Anti - D 50Iu Inj. , Anti Fungal Eye Ointmentointment , Anti Microbial Gloves Size - 6 To 8 , Anti Rabies Immunoglobulininj. , Anti Rabies Vaccines Curently Aooroved For Use In India Through Id Route Are Rabipur ( Pcec ) ( Verv ) , Abhayrab ( Pvrv ) And Pasteur Institute Of India, Coonoor ( Pvrv ) 1Ml Inj. , Anti Snake Venom Antiserum30 Ml Vial Polyvalent Anti Snake Venum Serum Enzyme Refined Reconstitute With10 Ml Of Sterile Water For Ection. Contain Equivalent Of 10 Ml Ofpurified Equine Globulin, 1 Ml Of Reconstitutedserum ( Powder Foam ) Inj. , Anti Uv Impregnated Pe Extension Tube For Light Sensitive Drugs.L-200Cm.. , Anti Uv Impregnated Pe Extension Tube For Light Sensitive Drugs. L-150Cm.. , Anti- Uv Impregnated Polyethylene Extention Tube For Light Sensitive Drugs, L- 150Cm, 200Cm. , Antibiotic Impregnated Medium Pressure Shunt / Shunt Should Be Impregnated With Rifampicin And Clindamycin Hydrochloride. It Should Leach Out For At Least 28 Days. Both Catheters To Have An Inner Diameter Of 1.3 Mm And An Outer Diameter Of 2.5 Mm And Should Have X-Ray Deductible Markings. . , Antimicrobial Silver Dressing With Nanocrystalline Technology 10X120 Cm , Antirust Solution With > 30% Phosphoric Acid- 1 Ltrsolution , Antiseptic Lotion ( Hospotal Const. ) Chlorodemine Glouconatesolu Ip 7.5%V / V +Cetrimide Ip15%W / V 1 Lt.Bot. Liquid , Aortic Punch Long Handle A Conical Tip Should Be There For Easy Insertion By Straight Orbutton Hole Technique, Ten Blade Sizes Fortrimming To Desired Size And Shape. Sizes - 3.5, 4Mm , Aortic Root Cannula With Vent Lineradioopaquetipswith Vent Line, Flanged Standard Tip And Standard Introducer, Sizes- 5, 7, 9 , Aortic Root Cannula With Vent Line Radioopaque Tipswith Vent Line, Flanged Standard Tip And Standard Introducer, Sizes- 5, 7, 9 12, 14Fr , Aortic Root Cannula With Vent Line Radioopaquetipswith Vent Line, Flanged Standard Tip And Standard Introducer, Sizes- 5, 7, 9 , Applic-Instr F / Sternal Closure Implants , Aprin Polyster Std Size , Aqueous Solution Of Haemocoagulase, Isolated From Bothrops Atrox 0.2 Cu , Chlorhexidine Gluconate Solution Ip 0.1% V / V ( As Preservative ) 10Mlnasal Drop , Arm Pouch ( Regular ) S / M / L , Armored Tube Made Of100% Siliconized Latex, Radio Opague, Mounted Connector, Pilot Balloon With Universal Port Size- 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 . , Armored Tube Made Of 100% Silicon, Radio Opaque, Should Have Prefilled Stylet Mounted Connector, Pilot Balloon With Universal Port.All Sizes. Fda / Ce Approved All Sizes. Fr- 2, 2.5 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9 , Arterialcatheter With Flow Switch Andstraight Guide Wire, G-18, L-6 / 13Cm . , Arterialcatheter With Flow Switch Andstraight Guide Wire, G-20, L-6 / 13Cm . , Arterial Cannulawith Flow Switchmechanism20 G , Arterial Catheter Made Of Polyurethanematerialwith Integral Extension Line.Havingangeled Suture Wingswith Lowprofile . Size 20 G , Arterial Catheter Made Of Polyurethanematerialwith Integral Extension Line.Havingangeled Suture Wingswith Lowprofile . Size - 18 G , Arterial Catheter With Straight Guide Wire G-20, L-8Cm, G-18, L- 10Cm . , Arterial Filter Adult The Arterial Filter Should Be For Adult Use. , Arterial Line 20G X 8Cm , Arterial Line 22G X 6Cms / 8Cms , Arterial Puncture Needle18 G , Arteriotomy Shunts ( Intracoronary Long Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.5, 2.0 , Arteriotomy Shunts ( Intracoronary Long Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.5, 2.0 , Arteriotomy Shunts ( Intracoronary Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.25, 1.5, 1.75, 2.0, 2.25, 2.5, 2.75 & 3.0 , Arteriotomy Shunts ( Intracoronary Shunts ) Should Be Beveled Tip, Should Have Fully Transparent Body, Sizes ( In Mm ) - 1.00, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5, 2.75 & 3.0 , Artesunate + Sulphadoxine + Pyrimethamineip ( Age Group 15 Or Above ) ( 200 Mg ( 3Tab ) + 750 Mg ( 2Tab ) + 37.5 Mg ( 1Tab ) ) , Combi Blister Pack , Artesunate 100 Mg ( 3 ) + Sulphadoxine750mg + Pyrimethamine 37.5Mg Ip ( 1 ) Age Group Between 5 To 8 Years Tab. , Artesunate Lets ( 3 ) 200 Mg And 2Lets Of Sulphadoxine 750 Mg + Pyrimethamine 37.5 Mg Lets Ip ( Age Group 15 Or Above ) Tab , Artificial Heart Valve Bileaflet Mitralmade Up Of Pure Pyrolytic Carbon, Optimal Profile Height, Should Have 80-90 Degree Leaflet Opening Angle, Should Have Flared Inlet At Inflow Sizes- 25, 27, 29, 31 , Artificial Heart Valve Bileaflet Mitral Bileaflet Mechanical Heart Valve Rotatable, The Material Used Is Pyrolytic Carbon On A Graphite Substrate, 80-90 Degree Opening Angle Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Artificial Heart Valve Single Leaflet Mitralmade Up Of Pure Pyrolytic Carbon Should Have Optimal Profile Height Should Have 80-90 Degree Leaflet Opening Angle, Should Have Flared Inlet At Inflow, Sizes- 25Mm, 27Mm, 29Mm, 31Mm , Artificial Heart Valve Single Leaflet Mitral Sinlge Leaflet Tilting Disc Mechanical Heart Valve Rotatable Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Ascorbic Acid ( 75 Mcg ) + Vitamin D3 ( 400 Iu ) + Biotin ( 150 Mcg ) + Cyanocobalamin ( 7.5 Mcg ) + Zinc Sulphate Monohydrate ( 63 Mg ) Tab , Ascorbic Acid ( Vitamin C ) I.P. 500Mgtab , Ash Brace S / M / L , Aspiration Catheter , Aspiration Catheter 6F, 7F , Aspiration Pump Aspiration Pump , Along With 1000Mi Disposable Vacuum Cannister Capable For Maintaining And Delivering Pure Vacuum Should Be Dgci And Usfda Approved , Aspiration Pumpaspiration Pump , Along With 1000Ml Disposable Vacuum Cannister Capable For Maintaining And Delivering Pure Vacuum Should Be Dgci And Usfda Approved , Aspiration Tubing For Connection With Aspiration Pump Should Be Dgci And Usfda Approved , Aspiration Tubingfor Connection With Aspiration Pump Should Be Dgci And Usfda Approved , Aspirin ( 75Mg ) + Atorvastatin ( 20Mg ) + Clopidogrel ( 75Mg ) Tab. , Aspirin Low Dose 75Mgtab , Asthalin Nebulization Solution1 Solution , Atenolol . - 100Mg Tab. , Atraumatic Dual Density, Flexible, Ultra Soft, Round Distal Tip Catheter For Closed Suctioning With Bronchoscopy Provision , Atropine Sulphate Eye Drops - 1% ( 5 Ml Vial ) Eye Drop , Atropine Sulphate Eye Ointment 1% ( 3 Gm Tube ) Eye Ointment , Auto Collect Single Device Blood Container For Collection And Storage With Plain Polystyrene Crystals. Sterilized, Needle1, Red Cap1, Female Luer White Lock Cap, Self Destroy Plunger , Capacity- 3Ml, 5Ml. . , Av Cassette Blood Lines Adult + Filtrate Line ( A / V 143 Ml ) Compatible With Multifiltrate Machine , Avigomicro Guide Wire , Avigo Micro Guide Catheter , Azathioprine 50Mg. Cap. , Azithromycin Eye Ointment , B.B Silk ( 12 Foils / Pkt ) ( 3 / 8 Rcut Needle 45 Mm Length 76 Cm, Size 2 / 0 ) ) , Consumable , B.B Silk Size-3 / 0 ( 12 Foils / Pkt ) ( 3 / 8Cir Rcut Needle 26Mm Length 76 Cm ) , Needle , B.B Silk With 1 / 2 Cir Rb Needle Size:1 / 0 20 Mm Length 75 Cm Non Absorbable Surgical Sutures Usp Surgical Material , B.B Silk With 1 / 2 Cir Rb / Cutting Needle 30 Mm Length 75 Cm Non Absorbable ( Size 2-0, 12 Foils / Pkt ) , Consumable , B.B. Silk 6 Reels X 25 Mts Length 25 Mts.Black Braided Silk Without Needle In Reels Non Absorbable Surgical Sutures Usp-, 2-0 ( 6 Reels Is Per Box Rate Should Be Quoted For 6 Reels ) , Surgical Material , B.B. Silk 6 Reels X 25 Mts Size:1 / 0 ( 6 Reels Is Per Box Rate Should Be Quoted For 6 Reels ) , Surgical Material , B12.500Mg. Inj. , Baby Care Sheets Super Absorption Surface, Spill Proof, Antimicrobial Finish, Easy To Wash, Size: 0.7M X 0.5 M , Baby Drape Translucent Soft Polyfilm ( Size-1.2X1.2M ) Incise Area 25X20cm. . , Baclofen 25 Mg Tab. , Baclofen 30 Mg Tab. , Baclofen 5 Mg Tab. , Bain Circuit , Bains Circuit ( Ce Certified ) ( Set Comprisingpatient End Mount, 22Mm Corrugated Plastic Hose X 1.6 Mtrs Long, Short Tubing Nipple, 22Mm / 22Mm Male / Female Circuit Adaptors X2, Distal End Mound, Long Tubing Nipple, Pvc Tubing X3mtrs, 22Mm Heidbrink Expiratory Valve 158Mm / 22Mm Angle Mount, 2Ltr. Breathing Bag, With Mount, 23Mm Male Plug In Mount ( 9012 ) , 23Mm / 23Mm, Female / Famale Circuit Adaptor ( 9036 ) In A Plastic Bag Finish. . , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 10Mm Intracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 10 Mm. Used Tor Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 10Mmintracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 10 Mm. Usedfor Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 15Mm Intracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 15 Mm. Used For Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved. , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 15Mmintracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 15 Mm. Usedfor Neurovascularpurpose.Should Be Dcgi And Usfda Approved. , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 20Mm Intracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 20 Mm. Used For Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Side Wall Aneurysm Coiling 4Mm X 20Mmintracranial Angioplasty Remodeling Balloon Catheter For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Side Wall Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. 4 Mm X 20 Mm. Usedfor Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcation Aneurysm Coiling 4Mm Diameter Intracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 4 Mm Used For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Terminal & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascuiar Purpose.Shouldbe Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcation Aneurysm Coiling 4Mm Diameterintracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 4 Mm Used For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Terminal & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcationaneurysm Coiling 7Mmdiameter Intracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 7 Mm Used For Treatment Of Vascular Occlusive Disease & Bai|Oon Assisted Coiling Of Termina & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Balloon Catheter Intracranial Angioplasty Remodelling For Terminal And Bifurcationaneurysm Coiling 7Mmdiameterintracranial Angioplasty Remodeling Balloon Catheter With Diameter Of 7 Mm Used For Treatment Of Vascular Occlusive Disease & Balloon Assisted Coiling Of Terminal & Bifurcation Aneurysms. Should Be Supplied With Compatable Guidewire, Microcatheter And Other Devices If Any For Its Use. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Baloon Cahtheter4, 5, 6, 7, 8 Mm With 4, 6, 8, 10 Cm , Baloon Inflammation Pump20, 40Atm , Band Ligator Set , Bandage, Cast Plaster, 6X 5 . , Bandage, Cast Plaster, 6X 5Y . , Bandage, Plaster, Xfst 5X5yd . , Barium Sulphate500 Gm.Powder , Barium Sulphate Power Susp 95% W / V, Powder ( Hd ) 95% W / V 250% W / V 400 Gram100 Solution , Battery Operated Articulating Laparoscopic Vascular Stapler With 4 Rows Staple Line Of 35Mm, 30Mm Cut Line, 360 Degrees Rotation, 50 Degrees Articulation On Both Sides, 9Mm Shaft Width , Battery Operated Powered Circular Stapler With 3 Dimensional Stapler Design And Atraumatic Gripping Surface For End To End Anastomosis Size 21Mm / 23Mm / 25Mm / 29Mm / 31Mm , Bcg ( 1 Ml Each ) , Syrings , Beclomethasone Inhalation I.P. 200 Mcg Per Dose Inhaler , Benzathine Penicillin 6 Lac Inj. , Benzyl Nicotinate ( 2Mg ) + Heparin ( 50Iu ) Ointment , Benzyl Penicillin, I.P 10 Lac Vial Inj. , Betamathasone 0.1%, 5Ml Eye Drop , Betamethasone Dipropionate Ointment 0.05% ( 15Gm ) Tube Ointment , Betamethasone Valerate + Gentamicine Sulphatetolnafrate+ Iodochlorhydroxyquin Ointment , Betamethasone Valerate +Gentamycine Cream 0.1% + 3%, 10Gm. 0.1% + 3%10 Gm Cream , Betamethasone Valerate 0.0012 Ointment , Betamethosome Valerate Ointment Cream Ip 0.12% 15Gmointment , Bilary Stent Double Pigtail 10 Fr - 10 Cm Length , Bilary Stent Double Pigtail 10 Fr - 7 Cm Length , Bilary Stent Double Pigtail 7 Fr - 10 Cm Length , Bilary Stent Straight 10 Fr - 10 Cm Length , Bilary Stent Straight 10 Fr - 7 Cm Length , Bilary Stent Straight 7 Fr - 10 Cm Length , Bilary Stent Straight 7 Fr - 7 Cm Length , Bilary Stentdouble Pigtail 7 Fr - 7 Cm Length , Bilary Stents , Bilbao Dotter , Bilbao-Dotter Hypotonic Duodunography Sets- 14F, Tube Length125 Cm, Tube Sideports 06, Tube Tip- Closed End, Torque Cable Diameter- 0.0625, Torque Cable Length -125Cm. , Biliary Balloon Catheter ( Triple Lumen ) Disposable , Biliary Stent - Tannebaum , Biliary Stents10x100, 10X120 And 10X80 , Bioabsorbable & Biocompatible Highly Porous & Sponge Based Adhesion Free Wound Dressing For Sinu-Nasal Cavity Size 8Cm X 2Cm , Bioabsorbable& Biocompatible Highly Porous & Sponge Based Adhesion Free Wound Dressing For Sinu-Nasal Cavity Size 8Cm X 2Cm , Biodegradable Material Biomatress Cover Mattress Protection Sheath For Infant And Neonates Non Allergic, Latex Free, Environmental Friendly Size.Fda / Ce Certified. . , Biopsy Forcep For Endoscopic Upper Gi , Biopsy Forceps Lower Gi Endoscopy , Bioresorbable High Absorbent Pur Easter Foam For Endoscopic Sinus Surgery. Size-4 / 8Cm. Fda Approved . , Bi-Pap Full Face Mask Kit ( Adlut ) , Bi-Pap Full Face Mask Kit ( Pediatrics ) , Biphasic Isophane Insulin30 / 70 40Iu / Ml ( 10 Ml Vial ) Inj. , Biphasic Isophane Insulinip ( 30% As Soluble Insulin & 70% As Isophane Insulin ) , Monocomponent Human Insulin Biosynthetic ( R-Dna Origin ) Each Ml Suspension Contains 40 Iu ( 10Ml Vial ) Inj. , Bipolar Cautery Forceps Bayonet Shaped 6 Inches Working Length, 1Mm Tip , Bipolar Cautery Forcepsbayonet Shaped 8 Inches Working Length, 1Mm Tip , Bisacodyl - 5Mg Tab , Bisacodyl ( 5 Mg ) , Suppository , Bishmuth 500 Gm Powder , Bisoprolol 10Mg Tablets , Bi-Spectral Index Monitor For Measuring The Depth Of Anaesthesia , Black Braide Silk Reel 2-0, 25Mtr , Black Braide Silk Reel 3-0, 25Mtr , Black Braide Silk Reel 4-0, 25 Mtr , Black Braided Silk - Reels -Size 1 , Black Braided Silk - Reels -Size 2-0 , Black Braided Silk - Reels -Size 3-0 , Black Braided Silk - Size : 1-0, 1 / 2 Circle R C, 38Mm, 75Cm ( Each Foil ) , Black Braided Silk - Size : 2-0, 1 / 2 Circle R C, 38Mm, 75Cm ( Each Foil ) , Black Braided Silk Nonabsorable Suture Usp Size 0 30Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 2 / 0 26Mm, 1 / 2 Circle Oval Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 16Mm, 3 / 8 Circle Prime Cutting, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 22Mm, 1 / 2 Circle Oval Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 25Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 3 / 0 26Mm, 3 / 8 Circle Rc, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 4 / 0 16Mm, 1 / 2 Circle Rb, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Cutting, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 5 / 0 12Mm, 3 / 8 Circle Prime Rc, 90Cms , Black Braided Silk Nonabsorable Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Rb, 76Cms , Black Braided Silk Nonabsorable Suture Usp Size 6 / 0 10Mm, 3 / 8 Circle Rc Micro Point, 38Cms , Black Braided Silk Nonabsorable Suture Usp Size 6 / 0 8Mm, 3 / 8 Circle Rc Micro Point, 38Cms , Black Braided Silk Nonabsorable Suture Usp Size 8 / 0 8Mm, 3 / 8 Circle Spatulated Micropoint, 38Cms Virginsilk , Black Braided Silk Reels Non Sterile Size 0 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 1 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 2 / 0 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 3 / 0 ( 25 Mtr ) , Black Braided Silk Reels Non Sterile Size 4 / 0 ( 25 Mtr ) , Black Braided Silk With Needle Suture , 1 / 2 Circle Round Body , 30Mm, 90Cm, 2-0 , Black Braided Silk With Needle Suture , 3 / 8 Circle Cutting, 45Mm, 76Cm, 2-0. , Black Braided Silk With Needle Suture , 3 / 8 Circle Cutting, 60Mm, 76Cm, 1No. , Black Braided Silk* 1 75Cm , 37Mm, 1 / 2 Circle, Taper Point, Black , Black Braided Silk* 2-0 75-76Cm , 25-26Mm, 1 / 2 Circle, Tapercut, Black , Black Braided Silk* 3-0 75-76Cm , 20Mm, 1 / 2 Circle, Taper Point, Black , Bladder Wash Syringe, 60Ml Or 70Ml, Piston Type , Blades For Craniotome ( Manman ) , Bleaching Powder Gr-Ii Is 1065 / 1989 With Upto Date Amendment Packed In 25 Kg Hdpe Bags Isi Marked Stable , Blood Administrations Set , Blood Bag Double 350 Ml . , Blood Bag Single 350 Ml . , Blood Bag Transfer 350 Ml . , Blood Bag Triple 350 Ml . , Blood Bag Triple 350 Ml Sagm . , Blood Glucose Testing Strip For Glucometer ( Compatible Glucometer Should Be Made Available Without Cost One For Every 500 Strip With Replacement Guarenty ) ( 50 Strip Box ) . , Bluthane Stent , Bmv Set 22, 24, 26 , Body Double Arm Needle , Bone Wax , Bone Wax , Bone Wax Sterile 2Gm , Bone Wax Sterile Usp , Boric Acid Ear Drops 10Ml Vial , Bosentan 62.5Mgtablets , Boswellin Cg 1.00% W / W Arbutin 0.5 % W / W Licorice Extract 40% Ca 1% W / W Coriander Seed Oil 0.3 % W / W In A Cream Base Tube Of 15 Gmcream , Bougie With Oxygen Port -Adult Size , Bougie With Oxygen Port -Adult Size And Paediatric Size , Bougie With Oxygen Port -Paediatric Size , Bovinebio Prosthetic Heart Valve Mitralshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size - 27Mm, 29Mm , Bovine Bio Prosthetic Heart Valve Aorticshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size- 19Mm, 21Mm, 23Mm , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 8In X 10In ( 20Cm X 25Cm ) 8In X 10In ( 20Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 2In X 2In ( 5Cm X 5Cm ) 2In X 2In ( 5Cm X 5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 4In X 10In ( 10Cm X 25Cm ) 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer ) Integra Dermal Regeneration Template ( 4In X 5In ( 10Cm X 12.5Cm ) 4In X 5In ( 10Cm X 12.5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) And Silicone Layer ( Bilayer-Meshed ) Integra Meshed Dermal Regeneration Template ( 4In X 10In ( 10Cm X 25Cm ) 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer2in X 2In ( 5Cm X 5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer8in X 10In ( 20Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Dermal Regeneration Template - Single Layer 4In X 5In ( 10Cm X 12.5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Wound Matrix Thin2in X 2In ( 5Cm X 5Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Wound Matrix Thin 4In X 10In ( 10Cm X 25Cm ) , Bovine Collagen And Glycosaminoglycan ( Chondroitin-6-Sulfate ) Integra Wound Matrix Thin 4In X 5In ( 10Cm X 12.5Cm ) , Braided Coated Polyester Non Absorbable Suture Usp Size - 2, 44.8Mm, 1 / 2 Circle Tc Heavy, 75Cms Green , Braided Coated Polyester Non Absorbable Suture Usp Size 2 / 0 26Mm, 1 / 2 Circle Rb Sh, 75Cms Green , Braided Coated Polyester Non Absorbable Suture Usp Size 3 / 0 26Mm, 1 / 2 Circle Rb Sh, 75Cms Green , Braided Coated Polyester Non Absorbable Suture Usp Size 4 / 0 8Mm, 1 / 4 Circle Spatulated Micro Point, Green 90Cms , Braided Coated Polyester Non Absorbable Suture Usp Size 5 55Mm, 1 / 2 Circle Tc Heavy, 75Cms Green , Braided Long Sheath 6Fx45cm , Braided Long Sheath 6Fx65cm , Braided Long Sheath 7Fx45cm , Braided Long Sheath 7Fx65cm , Braided Polyamide * 0 6X45cm Pre-Cut , Blackmm , Braided Polyamide * 0 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 1 7X75cm Pre-Cut , Blackmm , Braided Polyamide * 2-0 12X45cm Pre-Cut , Blackmm , Braided Polyamide * 2-0 7X75cm Pre-Cut , Blackmm , Braided Polyester ( Green / Blue / White ) 75 Cm, 2-0, Ptfe Firm Pledget ( Oval / Square ) 3Mm X 6Mm X 1.5 Mm, 25Mm 1 / 2 Circle Taper Point / Cut Double Arm ( 10 / 8 Sutures Per Foil ) ( Preferably Us Fda Aproved ) , Braided Polyester ( Green / Blue / White ) 75 Cm, 2-0, Ptfe Firm Pledget ( Oval / Square ) 3Mm X 6Mm X 1.5 Mm, 16-17 Mm 1 / 2 Circle Taper Point / Cut Double Arm ( 10 / 8 Sutures Per Foil ) ( Preferably Us Fda Aproved ) , Braided Polyester 2-0 1X30 / 75Cm Da, Oval / Squarepledget 3X6mm, Firm Pledget, Taper Point, 1 / 2 Circle, 25Mm ( Preferably Us Fda Aproved ) , Braided Polyester 2-0 Blue 1X30 / 75Cm Da, Oval Pledget 3X6mm, Soft Pledget, Taper Point, 1 / 2 Circle, 16Mm ( Preferably Us Fda Aproved ) , Braided Polyester 75 Cm 2, 45Mm 1 / 2 Circle Taper Cut / Point Double Arm ( Preferably Us Fda Aproved ) , Braided Polyester 75-76 Cm 2-0, 16-17 Mm 1 / 2 Circle Taper Cut / Point Double Arm ( Preferably Us Fda Aproved ) , Braided Polyester 90 Cm 2-0, 25Mm 1 / 2 Circle Taper Cut / Point Double Arm ( Preferably Us Fda Aproved ) , Breast Tissue Marker 17G. Rigid Needles Dual Trigger With Lifetime Visibility . , Bromelain 90 Mg+Rutoside Trihydrate 100 Mg+Trypsin-Chymotrypsin 50000 Au Tab. , Bromfenac, 5Ml Eye Drop , Bromocriptine 2.5 Mg Tab. , Broviac 2.7Fr, Single Lumen Pediatric Catheter With Surecuff Tissue Ingrowth Cuff With Basic Tray. , Broviac 4.2Fr, Single Lumen Pediatric Catheter With Surecuff Tissue Ingrowth Cuff Percutaneous Introducer System ( Peel-Apart ) , Broviac 6.6Fr, Single Lumen Pediatric Catheter With Surecuff Tissue Ingrowth Cuff Percutaneous Introducer System ( Peel-Apart ) , Bs Oxygen Connector For Ventilator , Bt Set With Luerlock , Budesonide Nasalspray , Budesonide Nebulising Suspension ( 0.5Mg / 2Ml Respule ) -Pack Of 5Respules , Budesonide Respules 0.25Mg / 2Mlrespule , Buprenorphine 0.3 Mg / Ml 1 Injection , Buprenorphine T.D. Patch 1 Mg Td Patch , Buprinorphine Patch 5, 7.5, 10, 15, 20 Micro Gm Per Hr , Buretteinfusion Set , Burs For Craniotome ( Manman ) , Butorphanol 1 Mg 2 Ml Ampoule Injection , Button Switch Pencil With Ptfe Coated Ez Clean Electrosurgical Tip , Button Switch Pencil With Ptfe Coated Modified Ez Clean Electrosurgical Tip , C 1, 2, 3Catheter5 F 90Cmand 65Cm , C ) Triple-Lumen Tip To Prevent Clogging Inside The Applicator , C.T.G. Paper Roll . Roll , Cabergoline 0.25Mg. Tab , Cable Plastic Strap Tie Lock Locked Tie , Caffeine ( 1Ml ) Syp. , Caffeine ( 1Ml ) Vial Inj. , Caffeine ( 2Ml ) Syp. , Caffeine ( 2Ml ) Vialinj. , Caffeine 60 Mg / 3Ml Injection , Calamine 500 Gm Powder , Calcitonin 200 Iu ( Nasal Spray ) , Calcitriol 0.25 Mcg+Elemental Calcium 200 Mg+Elemental Zinc 7.5 Mg+Ibandronic Acid 150 Mg Tab. , Calcitriol 0.25 Mcg+Elemental Calcium 500 Mg+Elemental Magnesium 50 Mg+Elemental Zinc 7.5 Mg+Ibandronic Acid 150 Mg+Vitamin K2-7 50 Mcg Tab. , Calcitriol 0.25 Mcg+Elemental Calcium 500 Mg+Elemental Zinc 20 Mg+Ibandronic Acid 150 Mg Tab. , Calcium 500 Mg + Vit D3 Sup , Calcium Aspartate Anhydrous 560 Mg Eq. To Elemental Calcium 75 Mgcap. , Calcium Carbonate 500 Mg Tab. , Calcium Chlorideinj. , Calcium Citrate 500Mg With Vitamin D3 200Mcg Tablet , Calcium Gluconate 10% 0F 10 Ml Ampoule Injection , Calcium Plolystyrene Sulphonate Powder 15Gm. Powder , Calcium With Vitamin D Tablets Usp Calcium Carbonate 1.25G Eq. To Elemental ( Calcium 500Mg And Cholecalciferol Ip 250 Iu ) , Tablet , Camera Cover , Canister With Gel Contains Isolizer & Filter. Size 500 Ml. Usfda Approved . , Canula Hub Protector Device Integrated With 70% Isopropyl Alcohal. Single Pack Sterilized . , Capamantadine 100Mg. Tab. , Carbamazepine 400Mg Tab. , Carbamizepine ( Standard Size ) Syp. , Carboxy Methyl Cellulose And Lipophillic - Tlc Agdressing, Size 10 Cm X 12 Cm , Carboxy Methyl Cellulose And Lipophillic - Tlc Ag Dressing, Size 15 Cm X 20 Cm , Cardioplegia Adapters - Y Types , Cardioplegia Heat Exchanger ( Bcd ) It Should Have Priming Volume Less Than 50 Ml, Blood Flow Rate Should Be Between 0 To 600 Ml / Min, Filter Pore Should Be Around 100 Um, Inlet Connection Should Be 1 / 4 , Outlet Connection Should Be 3 / 16. Heat Exchange Surface Area Should Be ?.20M 2, Heat Exchange Should Be Of Stainless Steelcorrugated / Convoluted Pipes. Bubble Trap Should Be Integrated For Highly Efficient Debubbling, Exchangeable Water In / Water Out Blood Flow Path Bottom Up It Should Have A Stopcockprime / Perfusion For Easypriming. It Should Have Tip In The Surgeon Pack So That It Can Beconnected To Cardioplegia Cannula. It Should Be Available Both In 4:1 Configurations. , C-Arm Cover , Carnitine 10 Ml Inj. , Cassette ( Blue Sensitivity ) 10 X 12 , Cassette ( Blue Sensitivity ) 12 X 12 , Cassette ( Blue Sensitivity ) 12 X 15 , Cassette ( Blue Sensitivity ) 12 X 6 , Cassette ( Blue Sensitivity ) 14 X 14 , Cassette ( Blue Sensitivity ) 14 X 17 , Cassette ( Blue Sensitivity ) 15 X 6 , Cassette ( Blue Sensitivity ) 6½ X 8½ , Cassette ( Blue Sensitivity ) 8 X 10 , Cassette With Intensifying Screen ( Blue Sensitivity ) 10 X 12 , Cassette With Intensifying Screen ( Blue Sensitivity ) 12 X 12 , Cassette With Intensifying Screen ( Blue Sensitivity ) 12 X 15 , Cassette With Intensifying Screen ( Blue Sensitivity ) 12 X 6 , Cassette With Intensifying Screen ( Blue Sensitivity ) 14 X 14 , Cassette With Intensifying Screen ( Blue Sensitivity ) 14 X 17 , Cassette With Intensifying Screen ( Blue Sensitivity ) 15 X 6 , Cassette With Intensifying Screen ( Blue Sensitivity ) 6½ X 8½ , Cassette With Intensifying Screen ( Blue Sensitivity ) 8 X 10 , Cast Bendage . , Cath Tap , Catheter Mount Expandable , Catheter Stabilization Device With Medical Grade Pvc Clamp Should Have Chlorhexidine Sterilizing Swab And Id Tag ( Large ) . , Catheter Stabilization Device With Medical Grade Pvc Clamp Should Have Chlorhexidine Sterilizing Swab And Id Tag ( Medium ) . , Catheter With Distally Mounted Non Compliant Balloon All Sizes , Cefdinir 1Gam. Inj. , Cefdinir 300 Mgcap. , Cefuroxime 30 Ml Syp. , Cencentrat Acidic Solution For Bicarbonat Dialysis 1.34, 1.83 Proporationing Solution - ( A ) , Sodium Bicarbonate Ip 600Gms. ( B ) , Sodium Chloride Ip Salts 235Gms.- ( C ) ( Abc ) Ffs Bottle 10 Lit.Can Iv , Centesis Drinage Sets , Cerebral & Somatic Oximeter Which Measures Rso2 ( Regional Blood Oxygen Saturation ) In The Brain And Skeletal Muscles ( Somatic ) Tissues Of The Body With The Help Of Nirs ( Near Infra Red Spectroscopy ) Technology. , Cerebral Protection Device , Cervical Ripering Baloon For Mechanical Dilation L-40Cm. Fr.-18, Balloon Capacity 80Ml . , Cetrimide + Choline Salicylate Gel For Oral Ulcer ( 0.01%+8%All / W / V ) 15 Ml 1 Solution , Cetrimide Cream Bp 20Gmointment , Chalk Powder 400Gms , Channel Hangers 10 X 12 , Channel Hangers 12 X 12 , Channel Hangers 12 X 15 , Channel Hangers 12 X 6 , Channel Hangers 14 X 14 , Channel Hangers 14 X 17 , Channel Hangers 15 X 6 , Channel Hangers 6½ X 8½ , Channel Hangers 8 X 10 , Cheprhonguiding Catheter6 Fr. , Chest Bag Size - 20, 24, 28, 32 , Chest Drainage Bottle Under Water Seal Drainage System. Double Chamber Compactunit With 2000 Ml Capacity , Chest Stand , Chibaneedle 21Gwith15 & 20 Cm Long , Chicken Pox Vaccine > 2000 Pfu Inj. , Chloramphenicol 250Mg Cap. , Chloramphenicol Eye Applicaps 1% ( 1X100 ) 1X100 Eye Drop , Chloramphenicol Eye Drops 1%, 5Ml Eye Drop , Chloramphenicol With Ploymyxin B Sulphate, 0.5%+5000Iu+0.5%, 5Ml 0.5%+5000Iu+0.5%5 Ml. Eye Drop , Chloramphenicol, Hydrocortisone 5Gm. Ointment Tube , Chlordipoxide-25Mg. Tab. , Chlorhexidine Gauze Dressing10cm X 10Cm. , Chlorhexidine Gluconate + Metronidazoe 20 Gm Tubeointment , Chlorhexidrine200 Solution , Chlorocol 0.5% Eye Drops , Chlorocresol 0.100%W / W, Clobetasol Propionate 0.050 % W / W, Miconazole Nitrate 2% W / W, Neomycin Sulphate 0.500 % W / W 15Gmointment , Chloroquine Phosphate - 250Mgtab , Chloroquine Phosphate40mg / Ml ( 5 Ml Amp ) Inj. , Chloroquine Phosphate60mg / Ml 3Ml Vial Inj. , Chloroquine Phosphate Suspension Equivalent To Chloroquine 50Mg / 5Ml ( 60 Ml Bottle ) Syp. , Chloroxylehol 4.8 W / V Terpineol 9% Alcohol 1800 Solution , Chlorphenamine 10Mg / Ml Solution For Injection , Chlorphenamine Maleate 100Ml Syp. , Chlorphenamine Maleate Amp / Vial 22.7Mg. Inj. , Chlorpheniramine Maleate Ip, 0.01% W V Eye Drops 5Ml 5Ml Eye Drop , Chlorpromazine 100Mg. Tab. , Chlorpromazine 50Mg. Tab. , Chlorpromazine Ip 25Mg Inj. , Chlorpromazine, 25Mg / Ml, 2Ml Amps Injection , Choline Salicylate Ip 9% W / V, Benzalkonium Chloride Solution Ip 0.02% 10Ml 10Ml Ointment , Chromium 0.4Mg., Copper 0.4Mg., Manganese 0.1Mg., Selenium 0.02Mg. Inj. , Chromostate 2Ml Inj. , Cilostazol 50 Mg Tab. , Cinacalcet 30Mg Tablets , Cinitapride 3Mg Extended Release Tab , Ciprofloxacin Eye Ointment 0.3% ( 3Gm Tube ) Eye Ointment , Citicholine 60Ml Syp. , Clavical Brace With Velcro S / M / L , Click Type Y Connector With Extn. Line Kit , Clindamycin 150 Mg Cap. , Clinical Thermometer. , Clobetasol Propionate 0.05 %W / Vlotion , Clobetasol Propionate 0.05 %W / W+Fusidic Acid 2 %W / Wointment , Clobetasol Propionate Bp 0.05% W / W Salicylic Acid 3.0% 30Gm Ointment , Clobetasol Propionate Bp, 0.05% W / W Gentamicin ( As Gentamicin Sulphate Ip ) 0.1% W / W Chlorocresolip ( As Preservative ) 0.1% W / W20gmointment , Clobetasone 0.05% + Gentamycinointment , Clobetasone 17 Butyrate 0.0005 Ointment , Clobitasol Proprionate 0.5% ( Lobate ) 15Gm Tube Cream , Clofazimine 100Mg. Cap. , Clomiphene Citrate 25 Mg Tab , Clomiphene Citrate 50 Mg Tab. , Clonazepam 2 Mg Inj. , Clonidine 150 Micro Gm / Ml Injection , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing Pu Foam Size Large 26Cmx16cmx3mm, Nanocrystalline Silver Non Adherent Wound Contact , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing - Pu Foam Size Small 10Cmx8cmx3mm, Nanocrystalline Silver Non Adherent Wound Contact , Closed Negative Pressure Suction System Compatible Pu Dressing Kit Containing - Pu Foam Size Small 18Cmx13cmx3mm, Nanocrystalline Silver Non Adherent Wound Contact , Closed Negative Suction Drainage System All Size , Closed Suction Systemsystem Should Have Filtration System Along With Rotating Patient Access Valve To Enable Complete Isolation Of The Sleeved Suction Catheter From Patient Airway When Suctioning Is Not Required.System Should Have 03 Micron Hydrophobic Filter For Immediate Visual Identification Of Ch Size And Flushing Port Which Should Swivels 360 Degrees And Should Be Equipped With Built-In Non-Return Valve , Closed System For Hourly Urine Measurement - Closed Urine Measuring System With Graduated Transparent Chamber Starting From 1 Ml To 500Ml Capacity, Consisting Of Fine Measuring Sections With A Capacity And Two Non Return Valve, Collection Chamber. Dual Chambered 120Cm Kink Resistant Tubing, Tapered Connector With Kombicon Needle Free Sampling Port, Flexible Fastening Strap For Easy Hanging. Sterile Individually Packed In Peel Open Pack With 2 L Storage Capacity, , Closed Wound Suction Unit Size 12Fg , Closed Wound Suction Unit Size 14Fg With 800 Ml Chamber , Closed Wound Suction Unit Size 16Fg , Closed Wound Suction Unit Size 18Fg , Clotrimazole ( Vaginal Tab ) 500 Mg ( With Applicator ) , Tablet , Clotrimazole + Beclomethasone Eye Drop, 5Ml Eye Drop , Clotrimazole Ear Drop, 10Mleye Drop , Clotrimazole Vaginali.P. - 100Mg ( With Applicator ) Tab , Cloxacillin 500 Mg Cap , Cmc And Lipophillic - Tlc Colloid Contact Layer, Size 10 Cm X 10 Cm , Cmc And Lipophillic - Tlc Colloid Contact Layer, Size 15 Cm X 20 Cm , Coated, Braided Lactomer 91* 0 90Cm, Violet37mm1 / 2 Circlereverse Cutting , Coated, Braided Lactomer 91* 0 90Cm, Violet40mm1 / 2 Circletaper Point , Coated, Braided Lactomer 91* 1 90Cm, Violet40mm1 / 2 Circlereverse Cutting , Coated, Braided Lactomer 91* 1 90Cm , Violet40mm1 / 2 Circletaper Point , Coated, Braided Lactomer 91* 2-0 75Cm, Violet30mm1 / 2 Circletaper Point , Coated, Braided Lactomer 91* 2-0 90Cm, Violet37mm1 / 2 Circlereverse Cutting , Coaxial Breathing Circuit -- It Should Be 1.8 Meterin Length+ T Piece+ Swivel Elbow Withleur Port And Cap + One 50 Cm Collapsible Circuit Adult , Codan Iv Drip Set , Codeine Phosphate 10 Mg+Triprolidine 1.25 Mg / 5Ml 100Ml Syp. , Codman Scalp Clip Forceps . , Coils For Embolization 35-5-5 / 35-5-6 / 35-5-7 , Colchicine 0.6 Mg Tablets , Collegin Dressing 2X2 & 4X4 , Colobag25 X 14Cm. , Colostomybag All Size , Colostomy Kit , Compact Portable Bedside Pulse Oximeter For Continuous Monitoring Of Spo2, Pulse Rate & Signal Strength , Complete Absorbable Mesh Fixation Device With Minimum Strap Length 7.0 Mm2 Point Fixation To Hold The Mesh And Device. 25 Absorbable Straps , Conectors For Cp Bypass 1 / 2X 1 / 2 X1 / 2 - ( Y Connector ) , Conectors For Cp Bypass 1 / 2X1 / 2 ( Single Connector ) , Conectors For Cp Bypass 1 / 2X3 / 8 ( Single Connector ) , Conectors For Cp Bypass 1 / 2X3 / 8X3 / 8 ( Y Connector ) , Conectors For Cp Bypass 1 / 4X Male Connector , Conectors For Cp Bypass 1 / 4X1 / 4 Luer Lock , Conectors For Cp Bypass 1 / 4X1 / 4 ( Single Connector ) , Conectors For Cp Bypass 1 / 4X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass 3 / 8X1 / 4 ( Single Connector ) , Conectors For Cp Bypass 3 / 8X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass 3 / 8X3 / 8 ( Single Connector ) , Conectors For Cp Bypass 3 / 8X3 / 8 Luer Lock , Conectors For Cp Bypass 3 / 8X3 / 8X1 / 4 ( Y Connector ) , Conectors For Cp Bypass 3 / 8X3 / 8X3 / 8 ( Y Connector ) , Conectors For Cp Bypass1 / 2X1 / 2 ( Single Connector ) , Conectors For Cp Bypass1 / 2X3 / 8 ( Single Connector ) , Conectors For Cp Bypass1 / 2X3 / 8X3 / 8 ( Y Connector ) , Conectors For Cp Bypass1 / 4X Male Connector , Conectors For Cp Bypass1 / 4X1 / 4 Luer Lock , Conectors For Cp Bypass1 / 4X1 / 4 ( Single Connector ) , Conectors For Cp Bypass1 / 4X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass3 / 8X1 / 4 ( Single Connector ) , Conectors For Cp Bypass3 / 8X1 / 4X1 / 4 ( Y Connector ) , Conectors For Cp Bypass3 / 8X3 / 8 ( Single Connector ) , Conectors For Cp Bypass3 / 8X3 / 8 Luer Lock , Conectors For Cp Bypass3 / 8X3 / 8X1 / 4 ( Y Connector ) , Conectors For Cp Bypass3 / 8X3 / 8X3 / 8 ( Y Connector ) , Connector Y&W , Multi , Connector 1 / 2X1 / 2X1 / 2Y Type Connectors , Conquest 40 High Pressure Balloon Non Compliant, Multilayer Peripheral Balloon With Ultra High Pressure Of 40 Atm. With Choice Of 2 Shaft Lengths Of 75 And 120 Cmdiameter ( 5Mm To 12Mm ) & Lengths ( 2, 4, 6, Cm ) . , Conquest Pro 12 , Conquest Pro 9.0 , Container Contains Isolizer To Convert Liquid Into Gel And Filter For Moisture Trap And Odour , Control Syringe 12Ml Rotate Luer , Control Syringe 20Ml Rotate Luer , Controle Syringe 20, 12Ml , Controller Should Be Indicated For Use : Deep Vein Thrombosis And Pulmonary, Embolism Prophylaxis.Controller Should Have Graphic User Interface Of 3.2-Inch Color Lcd & Provide Greater Visibility, Should Have Venous Refill Detection Technology For Superior Emptying Of Veins, Personalize Decompression Cycles For Individual Patients, Should Have Different Compression Level At All The Points ( Ankle, Calf And Thigh ) , Consumables Sleeves Should Have Three Bladders For Giving Optimal, Compression In Different Areas Of The Leg , Convective Patient Warming System For Delivering Warm Air Uniformly To The Patients Through Disposable Blankets , Copper Pipe 12Mm ( Per Meter ) , Copper Pipe 15Mm ( Per Meter ) , Copper Pipe 22Mm ( Per Meter ) , Corbolic Acid 400Gms Powder , Cord Clamp. , Coronary Balloons Abott Complete Sizes Sequencenc , Coronary Balloonsabott Complete Sizes Sequence Sc , Coronary Balloons Otwabott Complete Sizes Sequence , Coronary Dilators , Coronary Snare For Retrieval Of Intravascular Foreign Objects Neurovascular Snare For Retrieval Of Intravascular Foreign Objects Nitinol Shaft With Snare Catheter, Introducer & Torquedevice.Should Be Dcgi And Usfda Approved , Coronary Snare For Retrieval Of Intravascular Foreign Objectsneurovascular Snare For Retrieval Of Intravascular Foreign Objects Nitinol Shaft With Snare Catheter, Introducer & Torquedevice.Should Be Dcgi And Usfda Approved , Corrugated Drainage Sheet Pvc Disposable , Cotrimaxazole Ds 160Mg Tablets , Cotrimaxazole Ds 800Mg Tablets , Cotton Crape Bandage 10Cm X 4M ( Box Of 10 Bandages ) , Craniotome Cutter , Craniotomy Drape Sheet Size 1.6X3.2M. Adhesive Area 20Cm Dia 2 Pockets 15X18cm. 2 Tube And Cable Holders Side Channels And Collecting Funnel Side Channels And Collecting Funnel. Poly Sheet Lining 1.20Cm.X120.M. . , Crape Bandage 2 4 Mt . , Crape Bandage 4 4 Mt. . , Crape Bandage 6 4Mt. . , Cre Balloon 12Mm, 13.5Mm, 15Mm Each , Cross Over Sheath , Crtd Device+ Leads ( Fda Approved Not Ce Approved ) , Crtp Device+ Leads ( Fda Approved Not Ce Approved ) , Crystallineinsulin40 Inj. , Cse Kit- Pencil Point Spinal Needle - 115Mm, Locking Needle Hub, 10Ml Lor Syringe, Flat Filter, Hydrophilic Supported Membrance. . , Curved Blade Having Shaft Diameter 3 Cm & Shaft Leghth 4-9 Cmwith Integrated Hand Activation Control Buttons.Compatible With Gen 11 , Curved Cartridge Having Close Staple Height Of 1.5 Mm ( Blue ) , 2.0 Mm ( Green ) Tactile Feedback On Completion Of Firing Sequence, New Anvil, Knife With Every Catridge , Curved Cutter Curved Cutter Closed Staple Height 2.00Mm , Curved Cutter Reloadcurved Cutter Reload Closed Staple Height 2.00Mm , Curved Cutter Stapler Delivering Curvelinear 4 Rows Of Staple And 40 Mm Cut Line In 30Mm Width Having Tissue Retaining Pin, Intermediate Locking Position , Customisedtubing Pack With ( Pediatric ) Design P.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Silicon Headsuction / Gas Line 1 / 4 , Customised Tubing Pack With [ Adult ] Designp.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Headsuction Silicon / Gas Line 1 / 4 , Customised Tubing Pack With Arterial Filter ( Pediatric ) P.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Headsuction / Gas Line 1 / 4 , Customised Tubing Pack With Arterial Filter [ Adult ] P.V.C. Tubing, Complete Set Of Tubes, Connectors And Accessories, Arterial Pump Headsuction / Gas Line 1 / 4 , Cutting Burr 4Mm , Cutting Loop, Bipolar, 24 / 26 Fr, For Use With Hopkins Telescope 27005 Fa / Ba, , Cutting Loops ( Single Stem ) Monopolar, For 26Fr Tur , Cvp Manometer , Cyanoacrylate Glue Ection Therapy ( For Oesophageal And Gastric Varices ) , Inj. , Cyanocobalamin 400Mcg + Folic Acid 1Mg + Pyridoxine 10Mg Tablets , Cyanocobalamin 500 Mcg+Folic Acid 15 Mg+Niacinamide 200 Mg - ( Vitcofol 10Ml Inj. ) , Cyclobenzerpine 15 Mg Tab. , Cyclophosphamide 50 Mg Tab , Cytology Brush , Dabigatran100 Mg Tab. , Dabigatran 110Mg Capsule , Dabigatran 150Mg Tab. , Dacron Marking Patch ( Filamentous Fabric ) Should Be Nominal Thickness; Around 0.6 Mm, Water Permeability Approximately 1800Ml, Popularly Known AsMarking Patch.Sizes - ( 2 X2 ) , ( 4X4 ) , ( 6X 6 ) , Dacron Marking Patch ( Filamentous Fabric ) Should Be Nominal Thickness; Around 0.6 Mm, Water Permeability Approximately 1800Ml, Popularly Known AsMarking Patch.Sizes - ( 2 X2 ) , ( 4X4 ) , ( 6X 6 ) , Dafflon ( Micronized Flavonoid Fraction 1000 Mg ) Tab. , Dafflon ( Micronized Flavonoid Fraction 500 Mg ) Tab. , Dalela Female Self Urethral Dilator , Dalela Triple J Stent , Danazol50 Mg Cap. , Dark Room Tank ( 22.5 Lit. ) , Datascopeintra Aortic Balloon 35Cc , Datascopeintra Aortic Balloon 40Cc , Daunorubicin 50 Mg / Vial Vial , Daunorubicin ( 20 Mg / Vial ) , Injection , Deferasirox Dispersible 100Mg Tab. , Deferasirox Dispersible 250Mg Tab. , Deferasirox Dispersible 500Mg Tab. , Deflazacort 12 Mg Tab. , Deflazacort 18 Mg Tab. , Deflux - E- Needle Inj. , Deionized Water 5 Liter 1 Solution , Denali Ivc Filter Optional Ivc Filter With One Piece Nitinol Body, Electropolished Conical Shaped Designwith Dual Level Filtration Having Both Caudal And Cranial Migration Resistant With Anchors Benefit With Highly Visible Snare Tip Seamlessly Welded To The Body For Easy Filter Retrieval Even After Long In-Dwell Times. Gives You Both Femoral And Jugular Approachesfemoral & Juglar , Depo-Provera 150Mg / Ml Ection Inj. , Desferrioxamine 500Mg. Inj. , Desmopressin Acetate Nasal Spray 0.1 Mg / Ml 5 Ml Vial , Desmopressin Inj. , Desmopressin Tab. , Dexamethasone ( 4 Mg ) , Tablet , Dexamethasone 0.1%+ Polyimexin+Chloromphenical 1% 0.1%+1%5 Ml. Eye Drop , Dexamethasone Acetate 0.1 %Ointment , Dexmedetomidine 50 Mcg / 0.5 Mlampoule Injection , Dexrabeprazole Sodium 10Mg Tab. , Dextran70 % Ffs Bottle 500 Ml Iv , Dextran 10 % Dextrose 5 % Nacl 0.9 % Ffs Bottle 500 Ml Iv , Dextromethorphan 10Mg / 5Ml Syrup ( 60Ml Bottle ) Syp. , Dextromethorphan Hydrobromide Ip 10Mg + Chlorpheniramine Maleate Ip 2Mg + Phenylephrine Hydrochloride Ip 5Mg Sugar Free And In Mouth Dissolving Form Tab. , Dextromethorphan Hydrobromide Syrup 13.5 Mg / 5Ml ( 30 Ml Bottle ) Syp , Dextromethorphane Hydrobromide Phenylephrine Hcl Softgel Cap , Dextrose 200 Gm Powder , Dextrose 50% Ffs Bottle 25Ml Iv. , Dextrose 500 Gm Powder , Diagnostic Catheter Sim 1 , Diagnostic Catheter Sim 1 , Diagnostic Catheter Sim2 , Diagnostic Catheter Sim2 , Diagnostic Catheter Vertebral , Diagnostic Catheter Vertebral , Diagnostic Catheterc2 , Diagnostic Catheterc2 , Dialysis Starting Kit Disposable :A Sterile Tray With Top , Dialyzer 1.6- Multiple Use , Diamond Burr 15 Cm X 4 Mm , Diamond Drill Bits Cutting 4 Mm, 6Mm, 8Mm For Asceulaphand Drill , Diazepam ( 5 Mg ) , Tablet , Diclofenac Sodium 0.1, %5 Ml. Eye Drop , Diclofenac Sodium Mouth Garglesolution , Diclofenac Suppository 12.5Mg Suppository , Diclofenac Suppository 25Mg Suppository , Diclofenac Suppository 50Mg Suppository , Dicyclomine- 10Mgtab , Diethylcarbamazine- 100Mg Tab. , Difluprednate5ml Eye Drop , Difluprednate 0.5 Mg+ Moxifloxacin 5Mg 5Ml Eye Drop , Digital X-Ray Cassetts10 X 12 , Digital X-Ray Cassetts14 X 17 , Digital X-Ray Cassetts8 X 10 , Digital X-Ray Cr Machine Films Fuzi Machine ( 8X10, 14X17, 11X14 ) , Digital X-Ray Cr Machine Films Kodak Machine ( 8X10, 14X17, 10X12 ) , Digital X-Ray Dr Machine Films Konika Machine ( 8X10, 14X17, 10X12 ) , Digital X-Ray Filmsize 8 X 10 ( 150 Film Per Pack ) , Digital X-Ray Film ( Make- Fuji ) Size 11X14 , Digital X-Ray Film ( Make- Fuji ) Size 14X17 , Digital X-Ray Film ( Make- Fuji ) Size 8X10 , Digital X-Ray Film ( Make- Kodak ) Size 11X14 , Digital X-Ray Film ( Make- Kodak ) Size 14X17 , Digital X-Ray Film ( Make- Kodak ) Size 8X10 , Digital X-Ray Film ( Make- Konika ) Size 11X14 , Digital X-Ray Film ( Make- Konika ) Size 14X17 , Digital X-Ray Film ( Make- Konika ) Size 8X10 , Digoxin 250Mcg ( 0.25Mg. ) / Ml ( 2Ml Amp ) , Injection , Digoxin I.P. 500Mcg, ( 0.5Mg ) / 2Ml Inj. , Digoxin Syp 30Ml Syp. , Diltiazem 2% W / W In Organogel Basegel , Diltiazem 25 Mg / 5Ml Vial Injection , Diltiazem 5Mg / 1Ml ( 5 Ml ) , Injection , Dimethyl Fumarate 240Mg. Tab. , Dinoprostone Gel 5%Gel , Diosmin 500Mg Tab. , Diphenhydramine + Ammonium Chloride + Sodium Citrate Cough Syrup 60Ml , Diphenhydramine 25Mg. Tab. , Diphenhydramine Syrup ( 12.5Mg / 5Ml ( 100 Ml Bottle ) ) , Syrup , Diphtheria Antitoxin 10000 Iu ( 10Ml Vial ) Inj. , Dispersible Zinc 20Mg Tab. , Disposablesteriledual Drape Sheath { 140*210Cms } Integrated With High Absorbent Capacity Fabric Sheath With Absorption Area 24*27 And C Shape Incision Window ( 6 ) , Self Adherent Adhesive, Iso / Ce Certified . , Disposable Amniotic Fluid Collection Spillage Free Sac. , Disposable Bilayered Leak Proof Sheet 23.5X35.4 With Absorbent Surface . , Disposable Breathing Circuit ( Ventilator Circuit ) Adultsize , Disposable Breathing Circuit ( Ventilator Circuit ) Paediatricsize , Disposable Closed System A.F.C. Pouch, Embossed Leak Proof, Eto Sterile. Ce Certified . , Disposable Electrosurgical Control Pencil , Disposable Endoscopic Cutting And Stapling Devices 45 Mm 45 Mm Endoscopic Cutter And Stapler With Cambered Anvil And C Shaped Knife With A Knife Blade Indicator , 22Mm Distal Jaw Opening And 8 Mm Proximal, Shaft Length Of 340Mm. , Disposable Endoscopic Cutting And Stapling Devices 60Mm 60 Mm Endoscopic Cutter And Stapler With Cambered Anvil And C Shaped Knife With A Knife Blade Indicator, 22Mm Distal Jaw Opening And 8 Mm Proximal, With Single Handed Articulation Shaft Length Of 280, 340Mm & 440 Mm. , Disposable Eye Shield Protectoragainst U / V Light For Infant And Neonates , Steriloized, Single Pack . , Disposable Gynaec Dressing Kit, Ce Certified . , Disposable High Absorbent Lscs Drape Sheath With Self Adherent Incisional Window , Disposable Hiv Pack, 1 Kit , Disposable Insuline Syringe . , Disposable Intraluminal Stapler 19 To 25 Mm Curved Circular Stapler 19 To 25 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses. It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Intraluminal Stapler 25 To 29 Mm Curved Circular Stapler 25 To 29 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses. It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Intraluminal Stapler 29 To 33 Mm Curved Circular Stapler 29 To 33 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Intraluminal Stapler 33 Mm Curved Circular Stapler 33 Mm It Should Have A Controlled Tissue Compression Mechanism For Variable Tissue Thicknesses It Should Have A Closed Staple Size Of 1.0Mm-2.5Mm , Disposable Linear Cutter- 55Mm Linear Cutterof 55 Mm With Inbuilt Selectable Staple Height. , Disposable Linear Cutter- 75Mm Linear Cutterof 75 Mm With Inbuilt Selectable Staple Height. , Disposable Linear Cutter Reloads- 55Mmuniversal Black Reload Compatible With The 55Mm Linear Cutter With Inbuilt Selectable Staple Height. , Disposable Linear Cutter Reloads - 75Mmuniversal Black Reload Compatible With The 75Mm Linear Cutter With Inbuilt Selectable Staple Height. , Disposable Linear Stapler 30Mmlinear Stapler 30 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler 60 Mm Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler 90 Mmlinear Stapler 90 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler Reloads 30 Mm Reload For Linear Stapler 30 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler Reloads 60 Mm Reload Linear Stapler 60 Mm Size With Controlled Tissue Compression. , Disposable Linear Stapler Reloads 90 Mm Reload Linear Stapler 90 Mm Size With Controlled Tissue Compression. , Disposable Liner Cutter 55 Mm Disposable Liner Cutter 55Mm , Disposable Liner Cutter 75 Mm Disposable Liner Cutter 75 Mm , Disposable Multifire Cliip Applier Long Size-15 Clips , Disposable Multifire Cliip Applier Long Size-15 Clips , Disposable Multifire Clip Applier Small Size 20 Clip , Disposable Multifire Clip Applier Small Size 20 Clip , Disposable Needles , Disposable Needles - 18G. , Disposable Needles - 20G. , Disposable Needles - 22G. , Disposable Needles - 23G. , Disposable Needles - 26G. , Disposable Needles 14 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 16 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 18 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 21 Gneedle ( 11 / 2 Inch ) , Disposable Needles 24 G Needle ( 1 1 / 2 Inch ) , Disposable Needles 26 Gneedle ( 1 Inch ) , Disposable Paper Gloves Size 7 Inches Consumable , Disposable Patient Body Cover With Six Holders, Weight Bearing Capacity > 100 Kgs. , Disposable Patient Body Cover With Six Holders, Weight Bearing Capacity > 125 Kgs. , Disposable Patient Wrap With An A.F. Drain Bag With Measuring Device For The Assessment Of Blood Loss. Iso / Ce Certified . , Disposable Pcnl Drapes Kit; Size: 150 X 275 Cms, Adhesive Area : 20 Cms X 25Cms , Disposable Plastic Aprons ( Specs As Per Pollution Control Board ) , Disposable Plastic Aprons ( Specs As Per Pollution Control Board ) , Above 40 Microns Sterile , Disposable Plastic Leggings , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - ( 1.5Mm ) Endoscopic Cutting And Stapling Devices 45Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of1.5Mm And Open Staple Leg Length Of 3.5Mm. , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - ( 1.8Mm ) Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - ( 2.0Mm ) Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of2 Mm And Open Staple Leg Length Of 4.1 Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 45 Mm Reload - 1Mm Endoscopic Cutting And Stapling Devices 45 Mm Reload With Cut Line Of 42 Mm And A Staple Line Of 45 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - ( 1.5Mm ) Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1.5Mm And Open Staple Leg Length Of 3.5Mm. , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - ( 1.8Mm ) Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1.8 Mm And Open Staple Leg Length Of 3.8Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - ( 2.0Mm ) Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of2 Mm And Open Staple Leg Length Of 4.1 Mm , Disposable Reloads For Endoscopic Cutting And Stapling Devices 60Mm Reload - 1Mm Endoscopic Cutting And Stapling Devices 60Mm Reload With Cut Line Of 57Mm And A Staple Line Of 60 Mm With Closed Staple Height Of 1 Mm And Open Staple Leg Length Of 2.5Mm. , Disposable Reloads For Reusable Linear Cutter-55 Knife Blade Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Disposable Reloads For Reusable Linear Cutter-55 No Knife Module Compatible With Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings , Disposable Reloads For Reusable Linear Cutter-55 Reloads For Re-Usable Linear Cutter 55 Mm With Closed Staple Height Of 1.5 Mm & 2 Mm , Disposable Scalp Vein Set Size 20 No , Disposable Scalp Vein Set Size 22 No ( Each ) , Consumable , Disposable Spinal Needle 22 No , Disposable Spinal Needle 23 No , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized6 Inch / Pair , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized6.5 Inch / Pair, Consumable , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized 7 Inch / Pair , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized7 Inch / Pair , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized ( 7.5 Inch / Pair ) , Consumable , Disposable Suction Cather Size 12, . , Disposable Suction Catheter Assorted Covering All Sizes 10, 12, 14, 16, 18Consumable , Disposable Suction Catheter Size 14 . , Disposable Surgen Cap ( 100 Pcs Packet ) , Disposable Syringe ( For Vitamin K Inj ) ( 1Ml With Needle 26G ) , Consumable , Disposable Syringe With Needle - 10Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 20Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 2Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 3Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 50Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Syringe With Needle - 5Ml ( As Per Drugs & Cosmetics Act With Ce Certification ) , Disposable Three Layer Face Mask ( 100 Pcs Packet ) , Disposable Tuberculin Syringe. 1Ml , Dissecting Hook Having Shaft Diameter 3Cm & Shaft Length 4-9 Cm .Compatible With Gen 11 , Distal Embolic Protection Device , Dj Stent Removal Forceps, 4, 5 Fr, , Doc Extension145 / 165 Cm , Domperidone + Ranitidine 10Mg+150Mg Tab , Dormia Basket , Double J Stent; 3Fr, 18Cm, One End Open , Double J Stent; 4Fr, 18Cm, One End Open , Double J Stent; 5Fr, 22Cm, One End Open , Double Lumen Catheter Full Set With Rolleson Syringe. , Double Lumen Endobronchial Tubewith Ezee One Side Blockerno- 35, 37, 39, 40 ( Right Side ) , Double Lumen Endobronchial Tube With Ezee One Side Blocker No- 35, 37, 39, 40 ( Left Side ) , Double Lumen Hemo Dialysis Catheter Kit 15 Fr - 19Cm / 23Cm / 25Cm / 28Cm / 33Cm , Double Lumen Low Pressure Tracheal And Bronchial Cuffs Tubes For Minimising The Risk Of Mucosal Damage , Double Lumen Tube 33F , Double Lumen Tube 35F , Double Lumen Tube 37F , Double Lumen Tube 39F , Drain Under Water Seal Drainage System - 1000Ml , Dressing Tray , Dried Lvyleaf Extract 0.7Gm S - 100 Ml Syp. , Drill Bittool 15Ba30 Legend 15Cm 3Mm Ball , Drill Bittool 15Ba40 Legend 15Cm 4Mm Ba Compatible With Drill , Drill Bittool T15mg25 Legend 15Cm 2.5Mm Mh Compatible With Drill , Drill Bittool T15mh30d Legend 15Cm 3Mm Diam Compatible With Drill , Drill Bittool15ba20d Legend 15Cm 2Mm Ba Diam Compatible With Drill , Drill Bits Cutting 4 Mm, 6Mm, 8Mm For Asceulap Hand Drill , Drop Evion ( Standard Size ) , Drug Coated Balloon With 2 ?G / Mm2 Dose Of Paclitaxel With Polysorbate & Sorbitol As Carrier Which Will Deliver An Optimal, Therapeutic Drug Dose To The Target Vessel Wall After A Minimum 30 Second Inflation Time. Size- 035 With 120Cm Shaft: Diameter 4Mm -6Mm , Lengthupto 150Mm / 035 With 75Cm Shaft Diameter 5-12Mm Length 60Mm / 014 With Shaft 150Cm Diameter 1.5Mm -3Mm Length Upto 120Mm , Drugs Affecting Hr , Dry Laser Films 125Sh 10X12cm Dvb , Dual ( Parietal And Visceral Sides ) Composite Mesh Made Of Polyesterand Absorbable Collagen Film For Laparoscopic Hernia Repair Surgery With Size Of 15X15 Cm, Us Fda Approved , Dual Layer Hydrophilic Coating & Checker Flex Points For Unmatched Trackability With Innovative Reinforced Inner Lumen For Better Pushability. Size-Diameter :1.5 Mm To 5.0 Mm & Length: 20- 300 Mm , Dulcolaxsuppository 10 Mg Bisacodyl -16 Per Pack , Duraflex T Stent ( Tumorstent ) , Duraform / The Dural Graft Substitute Should Be Onlay With One Side Rough For Better Handling During Surgery, Should Be Of Absorbable Collagen Material. On Wetting In Saline, Should Not Shrink And Should Be Capable Of Being Used Sutureless. The Dural Graft Substitute Should Be Fda / Ce Approvedsize -3X3 . , Duraform / The Dural Graft Substitute Should Be Onlay With One Side Rough For Better Handling During Surgery, Should Be Of Absorbable Collagen Material. On Wetting In Saline, Should Not Shrink And Should Be Capable Of Being Used Sutureless. The Dural Graft Substitute Should Be Fda / Ce Approvedsize -4X 5 . , Durapore Surgical Tape Plaster 2.5Cm X9.1 Meter , Durasil Stent , Duropotch10x12 , Duropotch8x10 , Dusting Powder, 10 Gm ( Neomycin Sulphate 5 Mg, Baccitracin 250 Unit, Sulphacetamide Sodium 60 Mg ) , Dynaplast 15Cm X 4.5Meter , Dynaplast Plaster 10 Cmx 4.5 Meter , E Ptfe Stretch Re-In Forced Removable Ringed Thin Wall Vascular Graftsize: 6Mm / 8Mm Diameter X 50Cm / 70Cm / 80Cm Length , E Ptfe Stretch Re-In Forced Removable Ringed Thin Wallvascular Graft Size: 6Mm / 8Mm Diameter X 50Cm / 70Cm / 80Cm Length , E ) Maintains Fibronectin / Fibrinogen Ratio Within Physiologic Ranges , E.C.G.Roll Three Chanel . , E.C.G.Roll Two Chenal. , Each Pre-Filled Syringe Contains 44 Micrograms ( 12 Miu ) Of Interferon Beta-1A In 0.5 Ml Solution.Other Ingredients : Benzyl Alcohol, D-Mannitol, L-Methionine, Poloxamer 188 And 0.01 M Sodium Acetatebuffer Ph 4.2 , Easy To Carry Power Source To Attach 3 Silicon Ring Mounted Illumination Consumable.With Three Switch Assembly For Each Silicon Ring.Robust Design Rectangle 3Kg Medical Devices. , Eberconazole 10Mg + Methylparaben Ip 0.25% W / W Cream Of 10 Gm Tube , Eberconazole Nitrate Equivalent To Eberconazole - 1.0% W / W Mometasoe Furoate Ip 0.1% W / W In A Cream Base Preservative Methylparaben Ip 0.25% W / W Cream Of 10 Gm Cream , Eberconazole+Mometasoneointment , Ecg Cable 10 Lead , Ecg Electrodes As Perdrugs Act. , Ecg Electrodes With Offset Connector. Should Have Highly Conductive Wet Gel, Combination Of Instant And Long-Term Adhesives, Mri Compatible Breathable Micro Porous Material, Special Soft Sponge, Offset Connector Concept, High-Quality Ag / Agcl Sensor. Adultfda / Ce Approved Adult, , Ecg Electrodes With Offset Connector. Should Have Highly Conductive Wet Gel, Combination Of Instant And Long-Term Adhesives, Mri Compatible Breathable Micro Porous Material, Special Soft Sponge, Offset Connector Concept, High-Quality Ag / Agcl Sensor. Adultfda / Ce Approved Paediatric , Ecg Gel 250 Gm / Bottle 250 Gm , Ecg Paper Computerizesd Triple Channel 20M , Ecg Paper Roll 80Mm X 20Cm , Ecg Paper ( Chemical Coated ) 50Mm X 20Mm Roll. , Ecg Paper ( Wax Coated ) 50Mm X 30 Mtr, Roll. , Ecg Plastic And Silicone Ecg Clamp And Chest Electrodes , Echo Jelly 20Ml Bottle , Ecosprin 150Mgtablets , Edaravone 1.5Mg / Ml, 20Ml Amp.Inj. , Elastic Adeshiv Bandage10cm. X 4 / 6 M. , Elastic Knee Support With Hinges . , Electro Surgical Cautery Lead , Electrocorticography Connecting Cabie4 Contact , Electrocorticography Grid 4 X 5 Inch , Electrocorticography Grid I X 4 Inch , Electrosurgical Patient Plate , Elemental Calcium 150 Mgcap. , Elemental Calcium 225 Mg+Ibandronic Acid 150 Mg+Vitamin D3 800 Iu Tab. , Elemental Iron ( 50 Mg / 5 Ml 150 Ml Bottle ) , Syrup , Embolic Protection Device Carotid 3 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 3 Mm Affixed To A 0.014 Stainless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 - 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 4 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 4 Mm Affixed To A 0.014 Stainless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 — 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 5 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 5 Mm Affixed To A 0.014 Sta Inless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Ofsr.No 1 -10 Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 6 Mm With Variable Wire Distalembolicprotectiondevicewithnitinolmeshofsize6 Mm Affixed To A 0.014 Stainless Steel Guidewirecompatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 — 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Embolic Protection Device Carotid 7 Mm With Variable Wire Distal Embolic Protection Device With Nitinol Mesh Of Size 7 Mm Affixed To A 0.014 Stainless Steel Guidewire Compatible With Any 0.014 Or 0.018 Guidewire Fast Exchange System. To Be Provided With Deployment And Retrieval Catheter If Any And Compatable With Item Of Sr.No 1 — 10. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Enalapril 1.25 Mg Inj. , Endo Applicator- Matt Finishing Stainless Steel Applier, With Us Fda Approved Sizes- A- 32.5Cmfor Ml / L / Xl, B- 45Cm For Ml / L / Xl , Endobronchial Blocker Arndt Endobronchial Blocker , Endobronchial Blocker Cohen Endobronchial Blocker , Endobronchial Blocker Ez-Blocker Endobronchial Blocker , Endobronchial Tubes: The Endobronchial Tube Made Of Highly Flexible And Thermoplastic Materials With Excellent I.O. To O.D. Ratio As Well As The Continuous X-Ray Markers And Special X-Ray Indicators In The Cuff Area. Available In Extensive Range Of Sizes Starting From Smallest Available I.E. 26Fr. The Complete Set Contains Tube With Suction Catheter, Angled Connectors, Y- Connectors. No Latex Contents. Usfda Approved , Endocryl , Endopath Basx Bladeless 12Mm Trocar, Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Seal, Integrated Universal Seal, 100Mm Length. , Endopath Basx Bladeless 5Mm Trocar, Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Seal, Integrated Universal Seal, 100Mm Length. , Endopyelotomy Stent , Endoscope Mask Forpainless Gastroscopy And Fiberoptic Bronchoscopy For Continuous Ventilation, Should Havebite Block, Should Have Sealing Valve For Sealability Of The Mask.Allow Fiberoptic Bronchoscopy Through Nasal Cavity When Upper Airway Obstruction Occurs, Size-3, 4, 5. , Endoscopic Disposable Medium Large Clip Applicator 5Mm 1. It Should Go Through A 5Mm Port. 2. It Should Have A 8.8Mm Closed Clip Length.And The Jaws Should Be 8.4Mm Length. 3.It Hould Have 15 Titanium Clips With Lateral And Transverse Groove. 4. It Should Have Secure Clip For Confident Ligation. 5. It Should Have Long Thin Angled Jaws Which Provides Outstanding Access And Visibility.And Have A Lind Of Demarcation 6. It Should Have A 33Cm Long Shaft For Additional Reach. 7. It Should Have A Antibackup Ratchet Mechanism Which Provides Control Over Placement Closure. 8.It Should Have A Low Clip Indicator And A Last Clip Lockout , Endoscopic Evl Bands .Multiband Barrel , Endoscopic Foreign Body Forceps - Rotatable , Endoscopic Guidwire . , Endoscopic Linear Cutter Cartridge Having 35Mm Staple Line, 30 Mm Cut Line, Having Closed Staple Height Of 1 Mm And 4 Rows Of Staple Line , Endoscopic Linear Cutter Catridge With Reload Surface Having Pocket Extensions, 6 Rows Of Staples With Asymetric Bent Tip And Option Of Closed Staple Height Of 1 Mm ( White ) , 1.5Mm ( Blue ) , 1.8Mm ( Gold ) , 2Mm ( Green ) , Endoscopic Multi Band Shooter , Endoscopic Sclerotherapy Needle Upper Gi Endoscopy , Endoscopic Sphincterotome , Endoscopic Titanium Clip Applier, Having Alligator-Jaw Design, Distal Tip Closure, Rotating Shaft, Lateral / Transverse Grooves For An Vessel Security, 360 Rotation, For Large Size Clips , Endoscopic Titanium Clip Applier, Having Alligator-Jaw Design, Distal Tip Closure, Rotating Shaft, Lateral / Transverse Grooves For An Vessel Security, 360 Rotation, For Medium Size Clips , Endoscopic Titanium Clip Applier, Having Alligator-Jaw Design, Distal Tip Closure, Rotating Shaft, Lateral / Transverse Grooves For An Vessel Security, 360 Rotation, For Medium / Large Size Clips , Endoscopy Biopsy Forceps , Endoscopy Sclerotherapy Needle Lower Gi Endoscopy 21 G & 23 G Each , Endotoxin Iv Bacterial Filter With 0.22 Um Polyether Sulphone Material And Can Prevent Air Embolism. . , Endotracheal Tube - Cuffedno 4.5 Mm Internal Diameter , Endotracheal Tube - Cuffedno. 4.0Mm Internal Diameter , Endotracheal Tube - Cuffedno.5.0 Mm Internal Diameter , Endotracheal Tube - Cuffedno.5.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.6.0Mm Internal Diameter , Endotracheal Tube - Cuffedno.6.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.7.0 Mm Internal Diameter , Endotracheal Tube - Cuffedno.7.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.8.0Mm Internal Diameter , Endotracheal Tube - Cuffedno.8.5Mm Internal Diameter , Endotracheal Tube - Cuffedno.9.0 Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 2.5Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 3.0 Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 3.5Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 4.0Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 4.5Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 5.0Mm Internal Diameter , Endotracheal Tube - Uncuffedno. 5.5Mm Internal Diameter , Endotracheal Tube- The Endotracheal Tube Made Of Ruschelit™ Pvc Technology With Right Degree Of Stiffness I.E. Thermo Sensitive, Flexibility, And Kink Resistance. Comply With Astm Standard Requirements And Are Marked Withf29 Notation. Tubes Feature An Outstanding I.D. To O.D. Ratio. Available In A Full Range Of Paediatric And Adult Sizes Starting From 2.5Mm In Cuffed & 2Mm In Uncuffed. No Latex Contents. Usfda Approved , Endotracheal Tubes Size 7 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Blue , Endotracheal Tubes Size 8.5 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Blue , Entacapone , Enteral Feeding Devise-Should Have Both Feed And Flush Options With Mistic Technology, Should Be Able To Set Feed And Flush Rates Up To 24Hrs, And It Should Have Compatibility For Both Intermittent And Bolus Feed, Should Be Compact And Easy To Use, Feeding Bags Should Of 1000M, Feeding Bags Should Be Dehp Free, , Envoyguiding Catheter6 Fr. , Ephedrine 10Ml 0.75%, 10 Ml Nasal Drop , Epidural Anesthesia Kit- 16G. Catheter, Filter, Tuohy Needle, Lor Syringeswith Fixationspad. . , Epidural Anesthesia Kit- 18G.Catheter, Filter, Tuohy Needle, Lor Syringes Withfixationspad. . , Epidural Needle ( Tuohy Needle Of 80Mm Length And 10Mm Graduations With Internal Stylet And Optional Snap On Wings ) . , Epinephrine Hydrochiloride . 1Mg / Ml Inj. , Ercp Accerssories ( Bloon / Sphinterotome ) . , Erythromycin 0.02 Ointment , Erythromycin 250Mg. Tab. , Erythromycin 30Ml ( 100 Mg. / 5 Ml. ) Syp. , Erythromycin 500Mg. Tab. , Erythropoietin10000 Units / Ml Inj. , Erythropoietin2000 Units / Ml Inj. , Erythropoietin3000 Units / Ml Inj. , Erythropoietin4000 Units / Ml Inj. , Esophageal Stent . , Esophageal Stent 20 Mm, Length 10Cm , Esophageal Stent 20 Mm, Length 12Cm , Est Needle 21G . , Est Needle 23G . , Esterified Fatty Acid Complex Gel , Ethanol 85% With Emoilients 475 Ml Solution , Ethiodized Oil Injection , Ethyl Glycerin Ear Drops 1 Eye Drop , Etiophylline ( 77 Mg ) + Theophylline ( 23 Mg ) Tab. , Etiophylline + Theophylline Pead ( 46.5+14Mg / 5Ml ) 100Ml Syp. , Etodolac 400 Mg+Paracetamol 325 Mg Tab. , Etodolac 400 Mg+Paracetamol 500 Mg Tab. , Etodolac 400 Mg+Thiocolchicoside 4 Mg Tab. , Etodolac 400 Mg+Thiocolchicoside 8 Mg Tab. , Etodolac 400Mg+Paracetamol 500Mg+Serratiopeptidase 15 Mg Tab. , Etophylline 231Mg. + Theophyllin 69Mg.Sr 300 Mg Tab. , Etoposide 50Mgcapsule , Etoricoxib 120Mg Tab. , Etoricoxib 60 Mg+Thiocolchicoside 4 Mg Tab. , Etoricoxib 60 Mg+Thiocolchicoside 8 Mg Tab. , Etoricoxib 60Mg Tab. , Euphorbia Prostrate 10 Mg +Lidocaine 30 Mg Cream Basecream , Evd Catheters / The External Ventricular Drainage Catheter Should Be Impregnated With Rifampicin And Clindamycin. The Catheters Should Be Soft, Flexible. The Catheters Should Have 20 Large Holes 0.46Mm Dia And 20 Small Holes 0.23Mm Diaandtotal Drainage Area Of 4.15Mm Square To Facilitate Drainage Of Csf, Blood & Proteins. The Catheter Should Have Tantalum Tip And Depth Makers For X-Ray Visualization.It Should Be Fda / Ce Approved . , Evd- Venticular External Drainage System Contains One Bag. One 30Cm. Ventricular Catheter With Stylet Connecter, Trocar, Catheter Anchoring Collar And Connecting Tube. . , Evoh ( Ethylene Vinyl Alcohol ) Copolymer Dissolved In Dmso ( Dimethyl Sulfoxide ) , And Suspended Micronized Tantalum Powder , Expandable Anaesthesia Circuits With Maximum Lenghth Of 1.8 Meter. +1 Pc X Y-Piece Connector +1 Pc X Swivel Elbow With Leur Port And Cap +2 Pc End Connector , 22F Adult , Expandable Anaesthesia Circuits With Maximum Lenghth Of 1.8 Meter. +1 Pc X Y-Piece Connector +1 Pc X Swivel Elbow With Leur Port And Cap +2 Pc End Connector , 22F Paediatric , Extension Line With Male Luer Lock And3-Way Stop Cock . , Extension Line With Two Female Luer Lock Length- 15Cm , Extention For Breathing Circuit ( Catheter Mount ) 15Cm , Externalpigtaildrainagecatheter8 F And 9Fand 45 Cm , External Ventricular Drainage System , External Ventricular Drainage System , Extra Large Acetyl Polymer Ligation Clip. Usfda Approved. Non Absorbable, Inert, Non Conducive, Radiolucent. Does Not Interfere With 3 Tesla, Mri, And Ct & X Ray Diagnosis. Should Be Iso 10993-1 Compatible. Cartridges Should Have Self-Adhesive Backing. , Extranal Diameter 34Mm, 3Rows, Closed Stapel Hight 0.75Mm, Houshing Capacity 14Cc. , Extranal Diameter 36Mm, 3Rows, Closed Stapel Hight 0.75Mm, Houshing Capacity 14Cc. , Eye Drape With Drain Pouch Size - 100X75cm Adhesive 7X9 Cm. . , Eye Dress With Eye Pad . , F2 / 8Ta23 Dissecting Tool Midas Rexdrill 3Mm Diamond Burr , F2 / 8Ta23 Dissecting Tool Midas Rexdrill 4Mm Cutting Burr , F2 / 8Ta23 Dissecting Tool Midas Rexdrill 4Mm Diamond Burr , F2 / 8Ta23 Dissecting Tool Midas Rex. Drill 2Mm Cutting Burr , F2 / 8Ta23 Dissecting Tool Midas Rex. Drill 2Mm Diamond Burr , Face Shield For Covid 19 As Per Who Guidelines , Facial Dilators Set, Teflon Make ( For Pcn ) Each Pack Consisting Of Dailator Size 6, 8, 10, 12, 14, 16Fr - 1 Each , Fallopiantuberecanalizationset. , Faramycetine 20 Gmointment , Faramycetine 250Gointment , Faropenem 300Mg.Tabtab. , Fax Paper Roll . , Feeding Tube 10. , Feeding Tube 6, . , Feeding Tube 7, . , Feeding Tube 8, . , Feeding Tube 9, . , Femoral Cathetor Double Lumen Kit Curved , Femoral Puncture Needle 18G , Femoral Sheath 10Fx11cm , Femoral Sheath 5F , Femoral Sheath 5F , Femoral Sheath 5Fx11cm , Femoral Sheath 6Fx11cm , Femoral Sheath 7Fx11cm , Femoral Sheath 8F , Femoral Sheath 8F , Femoral Sheath 8Fx11cm , Femoral Sheath 9Fx11cm , Fentanyl 100 Microgran ( 2 Ml ) Inj. , Feracrylum 1% ( 100Ml ) Solution Solution , Feracryylum 1% Sterile Solution 100Ml Solution , Ferocrylion 1%Solution , Ferrous Ascorbate Equivalent To Elemental Iron 100 Mg + Folic Acid 1.1 Mg Tab. , Fibrin Sealantlyo 2Ml Kit , Fibrin Sealant Lyo 4Ml Kit , Fielderxtr , Fielder Fc , Fielder Xt , Filgrastim 300 Mcg ( Prefilled Syrings ) , Vial , Film Corner Cutter , Film Cutter , Film Cutters Big Size , Filter Paper Sheet ( ( Whatmann No 01 ) Sheets ) , Consumable , Filtrate Bag 10 L ( Drainage Bag 10 L ) Compatible With Multifiltrate Machine , Fixerpowder 22.5Ltrs. , Flatus Tube All Size , Flexometallictube Internal Diameter ( 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5 ) Mm , Flow Diverterflow Diverter:Fully Re-Sheathable, 48 Wire Braded Made Up Of Cobalt Cromium & Platinium Tungusten Alloy With Shoft Distal And Angled Tip, Fda Approved. , Flucinalone .025 + Neomycin.5% 20Gm. Ointment , Fluconazoleffs Bottle 100Ml Iv. , Fluconazole Eye Drop 3 Mg / Ml ( 10 Ml Vial ) Eye Drop , Fluconazole Ip, 0.5% W / W 15Gmointment , Fluency Self Expandable Stent Graft Self Expanding Nitinol Stent Encapsulated Between Two Ultrathin Layers Of Eptfe Grafts ( Both Luminal And External Surface Covered By Graft ) . Flared Ends To Ensure Proper Wall Apposition. Carbon Coated Luminal Surface To Reduce Early Stage Platelet Adhesion. Stent Graft Mounted On Multifunctional Tip-Less Braided Catheters With Stent Loc Mechanism.Diameter : 5Mm To 13.5 Mm Lengths: 20Mm, 30Mm, 40Mm, 60Mm, 80 Mm, 100Mm, 120M , Flumazenil 0.1 Mg / Ml5 Ml Multiple Dose Vial , Fluorescein Sodium Opthalmic Strips , Fluorscein Sodium 20% 3 Ml For Iv Use ( Inj. ) , Fluoxetine 10Mg Tab. , Flupenthixol 20 Mg / Ml. Inj. , Fluphenazine Deconate 25 Mg. Inj. , Flurbiprofen + Hpmc Ophthalmic Solution Eye Drops1 Eye Drop , Fluroscin Sodium Injection 10%Inj. , Fluticasonerespules0.5 Mg / 2 Mlinhaler , Fluticasone 0.05 % 10Gmcream , Fluticasone 0.05 % 20Gmointment , Fluvoxamine-100Mg Tab , Foamlite Dressings Transleucent Foam Dressings With Protective Barrier Against Water, Bacteria And Viruses, Water Proof Orshower Proof With Perforated With Gentle, Skin-Friendly Silicone Adhesive, Easy To Apply & Re-Position Designed To Absorb Low Exudate Levels And Helping Maintain A Moist Wound Healingenvironment Size 5X5 Cm , Fogarty Arterial Emblectomy Catheterfor Arterial Embolectomy Procedure, Usable Length 60-80 Cm. Sizes 3Fr, 4Fr, 5Fr, 6Fr, 7Fr , Foleys Urinary Bloon Catheter 3 Way Size 10. , Foleys Urinary Bloon Catheter 3 Way Size 12. , Foleys Urinary Bloon Catheter 3 Way Size 14 . , Foleys Urinary Bloon Catheter 3 Way Size 16 . , Foleys Urinary Bloon Catheter 3 Way Size 8. , Foleys Urinary Catheter Size8 - 2 Way. , Foleys Urinary Catheter Size 10 - 2 Way. , Foleys Urinary Catheter Size 12 - 2 Way. , Foleys Urinary Catheter Size 14 - 2 Way. , Foleys Urinary Catheter Size 16 - 2 Way. , Foleys Urinary Catheter Size 18 - 2 Way. , Folic Acid Tab ( 400 Mcg ) , Tablet , Fondaparinox 10 Mg / 0.8 Ml 1 Unitinj. , Formaldehyde ( Formalin ) 37% Acq Dilute 34 Ml Formaledehyde Solution With Water To Produce 100Ml ( 450 Ml Bottle ) , Formalin Tab. Bottle Of 100 Tab. , Formaline 450Ml Solution , Framycetin Drops 5Ml Eye Drop , Framycetin Sulfate 100Gm. Cream , Fully Automatic Disposable Biopsy Gun Should Have Penetration Depth 18 Mm, And Angle Sample Notch And Two Firing Bottom Option, With Color Coding For Easy Detection Of Gauzeall Size , Fully Automatic Disposable Biopsy Gun Should Have Penetration Depth 22Mm, And Angle Sample Notch And Single Firing Bottom Option, With Color Coding For Easy Detection Of Gauzeall Size , Furesemide 30Ml Syp. , Furosemide 20Mg. Tab , Furosemide 40Mg. Tab. , Fusidic Acid Ip 2% Betametasone Valerate Ipeq. To Betametasone--0.10% Preservative Chlorocresol Ip 0.12% 10Gmointment , G - Plast Non Woven Tape , G Lions For G8 Navigationndi Passive Sphere , G.V.Paint 500 Ml. Liquid , Gabapentin 300Mg Tablets , Gabapentin / Nortryptaline 300 + 10Mg Tablets , Gabapentine ( 100 Mg ) , Tablet , Gaia Wire 1 , Gaia Wire 2 , Ganciclovir 1.5 Mgointment , Gas Gangrene Antitoxin 10000 Iu / Ml 40000 Iuinj. , Gatifloxacin 100Ml Inj. , Gel Arm Rest , Gelofuscin 500 Ml Iv , Gentamycin + Betamethasone Eye / Ear Drop 3% 10Mleye Drop , Gentamycin Ear Drops + Hydrocortisone Ear Drops10mleye Drop , Gentamycine Cream , Gigli Saw Wire . , Glibenclamide Sr 5Mg Tab. , Glide Sheath Slender Terumo 7F , Glider Torque Device , Glucose In Glycerine Drop 25% 15Ml / Vial 1 Eye Drop , Glue ( N - Butyl Cyanoacrylate ) , Glycerine + Magnesium Sulphate Crystal250ml Jar , Glycerine Ip Solution ( 100Ml Bottle ) , Bottle , Glyceryl Cocoate, Cocoamidopropyl Betain, Glycerine, Disodium Laurth Sulfosuccinate , Sodium Citrate With Normal Ph Of 5.5 Offering Log 3 Reduction Virucidal And Bactericidal Hand Disinfection Products ( Hand Lotion ) 500 Mlbot. Liquid , Glyceryl Trinitrate 5Mg / Ml10ml Vial ( Nitroglycerine ) Inj. , Graft Master ( Covered Stent ) Complete Sizes Sequence1 Sets , Guide Catheter For Neurointervention 0.088 Id Full Length Stainless Steel Braid Reinforced Proximal Support Zone Transitioning To 4 Cm Distal Flexible Zone With Large .088 Inner Lumen Distal Shaft Hydrophilic Coating For Optimal Trackability 80 Cm Cm Lengths With Straight Tip Shape Should Be Dgci And Usfda Approved , Guide Catheter For Neurointervention 0.088’’ Idfull Length Stainless Steel Braid Reinforced Proximal Support Zone Transitioning To 4 Cm Distal Flexible Zone With Large .088 Inner Lumen Distal Shaft Hydrophilic Coating For Optimal Trackability 80 Cm Cm Lengths With Straight Tip Shape Should Be Dgci And Usfda Approved , Guide Liner V3 6F , Guide Wire - Teflon Coated - 0. 032 X 150 Cm J , Guide Wire - Teflon Coated - 0. 035 X 150 Cm J , Guide Wire - Teflon Coated - 0. 035 X 260 Cm J , Guide Wire ( Staight ) 0.035 Inch , Guide Wire 0.035 ( 0.89 Mm ) Hydrophilic Tip At Both End , Guide Wire 0.35 No . , Guide Wire 0.38 No . , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 200Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip, 0.014, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Compatable With Item Of Sr. No 3, 4, 52.Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 200Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip, 0.014, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 300 Cm Length High Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014, 300 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Should Be Compatable With Item Of Sr. No 3, 4 And S2. Used For Neurovascularpurpose Should Be Dcgi And Usa-Da Approved. , Guide Wire For Microcatheter For Aneurysm Management Size 0.014 Inch 300Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014, 300 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Used For Neurovascularpurpose Should Be Dcgi And Usfda Approved. , Guide Wire For Microcatheter For Avm Management Size 0.008 Inch 200Cm Lengthhigh Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.008, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Guide Wire Hydrophyliccoated Floppy Tip Straight; 0.018 , Guide Wire Hydrophyliccoated Floppy Tip Straight; 150Cm-0.025 , Guide Wire Hydrophyliccoated Floppy Tip Straight; 150Cm-0.035 , Guide Wire Hydrophylic Coated J-Tipped; 150Cm-0.035 , Guide Wire Ptfe, Straight Tip; 150Cm-0.025 , Guide Wire Ptfe, Straight Tip; 150Cm-0.035 , Guide Wire, Zebra, Straight Tip; 150Cm-0.035 , Guidewire 0.035, 150 Cms 0.035 , Hydrophilic Guidewire 150 Cms Length , Guidewire 0.035, 150 Cms0.035 , Hydrophilic Guidewire 150 Cms Length , Guiding Catheter 6F Jl Sh 3.0 , Guiding Catheter 6F Jl Sh 3.5 , Guiding Catheter 6F Jl Sh 4.0 , Guiding Catheter 6F Rdc , Guiding Catheter 7F Jl 3.0 , Guiding Catheter For Neurointervention 5F Neurovascular Guiding Catheter 5F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointervention 6F Neurovascular Guiding Catheter 6F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointervention 6F6 Fr Intracranial Support Catheterwith 0.072 Id, Upto 130 Cm Long With Flat Pitch Nitinol Braiding , Guiding Catheter For Neurointervention 7F Neurovascular Guiding Catheter 7F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointervention 8F Neurovascular Guiding Catheter 8F, Made Of Stainless Steel Hybrid Braid. Proximal Material- Nylon. Distal Material- Polyurethane, Entire Length Braided Except Distal Tip, Inner Coating: Ptfe, Available In Various Shapes. Preferred Shape: Head Hunter- H1.Should Be Dcgi And Usfda Approved , Guiding Catheter For Neurointerventiondistal Access Catheter: 5 Fr Intracranial Support Catheterwith 0.058 Id, Upto 130 Cm Long With Flat Pitch Nitinol Braiding , Guiding Catheters 6F 3D Rc , Guiding Catheters 6F Al 0.75 , Guiding Catheters 6F Al 1.0 , Guiding Catheters 6F Al 2.0 , Guiding Catheters 6F Ar 1.0 , Guiding Catheters 6F Ar 2.0 , Guiding Catheters 6F Ebu 3.0 , Guiding Catheters 6F Ebu 3.5 , Guiding Catheters 6F Ebu 4.0 , Guiding Catheters 6F Hockey Stick , Guiding Catheters 6F Jl 3.0 , Guiding Catheters 6F Jl 3.5 , Guiding Catheters 6F Jl 4.0 , Guiding Catheters 6F Jl 4.5 , Guiding Catheters 6F Jr Sh 3.0 , Guiding Catheters 6F Jr Sh 3.5 , Guiding Catheters 6F Jr Sh 4.0 , Guiding Catheters 6F M Radial , Guiding Catheters 6F Mpa 1.0 , Guiding Catheters 6F Mpa 2.0 , Guiding Catheters 6F Mpa 3.0 , Guiding Catheters 6F Rrd , Guiding Catheters 6F Xb 3.0 , Guiding Catheters 6F Xb 3.5 , Guiding Catheters 6F Xb 4.0 , Guiding Catheters 6F Xb Lad 3.0 , Guiding Catheters 6F Xb Lad 3.0 , Guiding Catheters 6F Xb Lad 3.5 , Guiding Catheters 6F Xb Lad 4.0 , Guiding Catheters 6F Xb Rc 3.5 , Guiding Catheters 7F 3D Rc , Guiding Catheters 7F Al 0.75 , Guiding Catheters 7F Al 1.0 , Guiding Catheters 7F Al 2.0 , Guiding Catheters 7F Ar 1.0 , Guiding Catheters 7F Ar 2.0 , Guiding Catheters 7F Ebu 3.0 , Guiding Catheters 7F Ebu 3.5 , Guiding Catheters 7F Ebu 4.0 , Guiding Catheters 7F Hockey Stick , Guiding Catheters 7F Jl 3.5 , Guiding Catheters 7F Jl 4.0 , Guiding Catheters 7F Jl 4.5 , Guiding Catheters 7F Jr 3.5 , Guiding Catheters 7F Jr 4.0 , Guiding Catheters 7F Jr Sh 3.0 , Guiding Catheters 7F Jr Sh 3.5 , Guiding Catheters 7F Jr Sh 4.0 , Guiding Catheters 7F M Radial , Guiding Catheters 7F Mpa 1.0 , Guiding Catheters 7F Mpa 2.0 , Guiding Catheters 7F Mpa 3.0 , Guiding Catheters 7F Rdc , Guiding Catheters 7F Xb 3.0 , Guiding Catheters 7F Xb 3.5 , Guiding Catheters 7F Xb 4.0 , Guiding Catheters 7F Xb Lad 3.0 , Guiding Catheters 7F Xb Lad 3.5 , Guiding Catheters 7F Xb Lad 3.5 , Guiding Catheters 7F Xb Lad 4.0 , Guiding Catheters 7F Xb Rc 3.5 , Guiding Catheters 7F Xb Sh 3.0 , Guiding Catheters 7F Xb Sh 3.5 , Guiding Catheters 7F Xb Sh 4.0 , Guiding Sheath , Guioe Wire For Microcatheter For Avm Management Size 0.008 Inch 200Cm Length High Torque, Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.008, 200 Cm Hydrophilic Guide Wire With Torque Device For Use With Infusion Catheters, Compatabie With Item Of Sr. No 1, 2 And 3. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Gynae Belt . , H 1, 2, 3 Catheter5 F , H1 Catheter4 F , H1n1 Vaccine ( Swaine Flu Vaccine ) , Haemophilous Influenze B ( Hib ) Vaccine , Haemostasis Dressing , Halometasone 0.05%Ointment , Halometasone 0.05% Andfusidic Acid 2% W / Wointment , Halometasone Monohydrate 0.05% W / W + Fusidic Acid Ip 2.00% W / W + Propylparaben Ip 0.015% W / W Cream Of 10 Gm Tube , Halometasone Monohydrate 0.05% W / W, + Cholorocresol Ip 0.1 % W / W Cream Of 10Gm Tube , Haloperidol5mg / Ml ( 1 Ml Amp ) Inj. , Haloperidolnasal Drops , Haloperidol ( Long Acting ) Deconate 50 Mg. Inj. , Halothane 250Ml , Hand Activated Blade With Flat Tip For Spot Coagulation Sharp Edges For Cutting, Blunt Convex Surface For Broadest Area Of Coagulation And Concave Surface For Sealing Vessels, Compatible With Gen11 , Hand Activated Dissecting Hook Blunt Outer Radius For Captive Coagulating, 60-Degree Sharp Inner Radius For Cutting, Compatible With Gen11 , Hand Pressure Gauge For Intra Cuff Pressure Monitoring , Handpiece ( Blue ) Compatible With Gen 11 , Handpiece ( Transducer ) Compatible With Gen 11 , Hanger Channel Type 10 X 12 , Hanger Channel Type 12 X 12 , Hanger Channel Type 12 X 15 , Hanger Channel Type 12 X 6 , Hanger Channel Type 14 X 14 , Hanger Channel Type 14 X 17 , Hanger Channel Type 15 X 6 , Hanger Channel Type 6½ X 8½ , Hanger Channel Type 8 X 10 , Hanger Clip 10 X 12 , Hanger Clip 12 X 12 , Hanger Clip 12 X 15 , Hanger Clip 12 X 6 , Hanger Clip 14 X 14 , Hanger Clip 15 X 6 , Hanger Clip 6½ X 8½ , Hanger Clip 8 X 10 , Hcg5000 Iu 1Ml / Amp Unit Inj. , Hcg 2500 Iu 1Ml / Amp Unit Inj. , Heart Positioner For Beating Heartshould Be A Low Profile Positioner For Apex And Off Apex Position And To Lift The Heart. , Heart Positioner For Beating Heart Should Be A Low Profile Positioner For Apex And Off Apex Position And To Lift The Heart. , Heart Rail Ii Terumo , Heat And Moisture Exchangers For Spontaneously Breathing Tracheotomy Patients , Hem - O - Lock Polymerclip, Usfda Approved , Hemmorhoidal Circular Staple Hemmorhoidal Circular Stapler 33Mm With Controlled Tissue Compression For Variable Tissue Thickness, Leg Length Of 4Mm. , Hemodaylasis - Blood Tubbing Full Set ( Ce Certified ) . , Hemodaylasis - Post Pum. , Hemodialysis Fluid For Bicarb Made ( Part A 10 Ltr +Part B 500Gm 2 / Pkt ) Solution , Hemodialysis Fluid For Bicarb Made ( Part A 10 Ltr +Part B 500Gm 2 / Pkt ) , Consumable , Hemodilaysis Catheter8f , Hemorrhoidal ( 33Mm ) Circular Stapler ( With Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm - 1.5 Mm, Staple Open Leg Length Of 5.5 Mm ) , Hemostatic Gelatin Thrombin Matrix 10 Ml Kit , Hepatitis A Vaccine - Administered By Ection Into The Muscle Of The Upper Arm. Two Separate Shots Of 0.5 Ml For Children Inj. , Hepatitis A Vaccine - Administered By Ection Into The Muscle Of The Upper Arm. Two Separate Shots Of 1Ml For Adults Inj. , Hernia Kit Containingpolypropylene Mesh 7.6Cm X 15Cm Polypropylene Suture Size 2-O, 90Cm , 30Mm ½ Circle Rb Needlepolyglactin910 , Triclosan Coated Usfda Approved Suture Size 2-O, 70Cm, 30Mm ½ Circle Rb Needle , Hernia Kit Containing Polypropylene Mesh 6Cm X 11Cm Polypropylene Suture Size 2-O, 90Cm , 30Mm ½ Circle Rb Needlepolyglactin910 , Triclosan Coated Usfda Approved Suture Size 2-O, 70Cm, 30Mm ½ Circle Rb Needle , Hf-Female Spike Adapter Compatible With Multifiltrate Machine , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma Silicon Elastomer Coated- 2 Way , High Flow Foleys Urinary Balloon Catheter With Longer Indwell Time & Reduced Tissue Trauma. Silicon Elastomer Coated - 3 Way , High Flow Triple Lumen Polyurethanecatheter Tray.Fr-7, G-16X16x18, L-15 / 16Cm. With Guide Wire, Triple Lumen Catheter, Puncture Needle, Short Iv Canula, Rollerson Syringe, Dilator, Scalpel, 3 Injection Cap, Drape.. , High Pressure Line , High Speed Screen 10X12 X-Ray , High Speed Screen 6.5X8.5 X-Ray , High Speed Screen 8X10 X-Ray , High Torque Bmwpreformedj 190Cm , High Torque Bmw 0.014X 260Cm , High-Volume, Low-Pressure Cuff Preformed Oral And Nasal Rae Tubes For Reducing The Risk Of Kinking And Also To Allow Unobstructed Access For Surgical Procedures At Head And Neck , Hiv Disposable Preventive Kit ( For Surgeon ) , Homatropine Hydrobromide 2 %W / V 5Ml Eye Drop , Hormonal Intrauterine System Hius - B Erinna , Hubsite Huber Bebel Needle ( G-20, G-22, Length-22, 25Cm ) With Wings And Flexible Polyurethane Extension Tube ( L-30Cm ) . , Human Anti-D Immunoglobulin 300 Mcg , Human Hepatitis B Immunoglobulin ( 100Iu ) / 1Ml Injection , Human Mixtard 40Iu 10Ml Inj , Human Normal Immuneglobulin ( I.P. / E.P. ) 5Gm. / 100Ml Inj. , Humbeysknife Disposable Blade . , Humidifier { Hme Filter } Adultsize , Humidifier { Hme Filter } Paediatricssize , Hyaluronidase ( 1500Iu ) Amp. Injection , Hydralazine Hydrochloride 20Mg / Ml ( 1 Ml Amp / Vial ) Inj. , Hydrazaline 1 Lac Iu Inj. , Hydro Twister Guide Wire , Hydro Wire , Hydrocephalus Shunt System Complete Set Regular Size Vp Lp With Bacterial Resistant Tubing . , Hydrocephalus Shunt System Complete Set Regular Size Vp Mp With Bacterial Resistant Tubing . , Hydrocolloid Dressings Self Adherent Moist Wound Dressing Made Up Of Triple Hydrocolloid Matrix With Elastomeric Polymer Forpressure Ulcers / Dry Woundssize, 7.5X7.5 Cm, Oval, 15X15cm, 10X10cm , Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S / L. Ce Certified. , Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S / L. Ce Certified. , Hydrogel Barrier Based On Sepra Technology Swells Once In Contact With Moisture To Minimize Tissue Attachment , Hydromorphone 1Mg Tablets , Hydromorphone 2Mg Tablets , Hydrophilic Coated .032”, .035” X 150 Cm Angled & Straighttip Guide Wire With Glider Torque Device , Hydrophilic Guide Wire ( Terumo ) , Straight Tip, 150Cm, 0.035 Diameter , Hydroquinone 2 %W / W + Mometasone Furoate 0.1 %W / W + Tretinoin 0.025 %W / Wcream , Hydroquinone 2% + Oxybenzone 2.5% +Octinoxate 9% ( Melalite 15% ) 0.04 Ointment , Hydroquinone Usp..2.0% W / W Tretinoin Usp .0.025 % W / W Mometasone Furoate Usp ..0.1 % W / W 20Gmointment , Hydroxy Chloroquin 200 Mg Tablets , Hydroxy Chloroquin 400 Mg Tablets , Hydroxy Propyl Methyl Cellulose ( Hpmc ) 2 %W / W-Pfs With Cannula Injection , Hydroxypropyl Methylcellulose Opthalmic Solution ( Hpmc ) 2 %W / W , 5Gm. Gel ( Pfs Syringe ) , Hyoscine Butylbromide 10Mg. Tab. , Hyoscine Butyldromide 20Mg. / 1Ml Amp. For Im / Iv Use Injection , Hypoallergenicporous Adhesive 10Cm. X 2M. , Hypodermic Needles For Single Use -Gauze 23 Bis Length, 25 +1 / -2 , Hystocryl , I P Needle ( With Echogenic Tip ) , Ibandronic Acid 150 Mg Tab. , Ibandronic Acid 50 Mg Tab. , Ibuprofen - 400Mg Tab. , Ibuprofen 400 + Paracetamol 500Mg. Tab. , Ibuprofen Syrup 100Mg / 5Ml ( 60 Ml Bottle ) Syp. , Icp Monitor Patient Transducer Kit Compatible With Codeman Monitor , I-Gel Size-3 , I-Gel Size - 4 , I-Gel Size - 5 , Image Intensitycover , Impregnated Vascular Hemostatic Pec Porous Sponge For Control Of Traumatic Arterial & Venous Bleeding. Effective On Patient On Anticoagulants. Size 5Cmx 5Cm , Impregnated Vascular Hemostatic Pec Porous Sponge For Control Of Traumatic Arterial & Venous Bleeding. Effective On Patient On Anticoagulants. Size 7Cmx 7Cm , Impression Compound. , Incentive Spirometer 3 Balls With 3 Different Chambers , Indocyanine Greeninjection10ml , Indomethacin 1% 5Ml Eye Drop , Indomethacin 25Mg Cap. , Infaltion Device With Survival Kit , Infant Feeding Tube ( Catheter ) All Size . , Inflation Device , Inflation Device Gun Type , Influenza Vaccine 0.5 Ml Vaccine , Infusion Line With Three Way Extension Port And Closed Iv Connection Device . , Infusion Line With Two Way Extension Port And Closed Iv Connection Device. , Injection Protamine50mg. / Per 5Ml , Injection Tirofiban , Instillaion Mapc Tube , Instillaion Therapy Dressing Made Of Black Polyurethane Ester Spiral Cut Sheet Pore Size 400 To 600 Micronsize 12.5 X18 X3.3Cm , Instillaion Therapy Dressing Made Of Black Polyurethane Ester Spiral Cut Sheet Pore Size 400 To 600 Micron, Size 7.5X10 X3.3Cm , Instillation Therapy Largepu Foam. Pore Size 400-600 Micron , Insulin Glargine 100Iu - 10Ml Vialinj. , Insulin Pen Needle 32G ( 4Mm ) Packing 100 Units. , Insulin Syringe ( 1Ml With 31 G Needle ) , Intensifying Screen ( Blue Sensitivity ) 10 X 12 , Intensifying Screen ( Blue Sensitivity ) 12 X 12 , Intensifying Screen ( Blue Sensitivity ) 12 X 15 , Intensifying Screen ( Blue Sensitivity ) 12 X 6 , Intensifying Screen ( Blue Sensitivity ) 14 X 14 , Intensifying Screen ( Blue Sensitivity ) 14 X 17 , Intensifying Screen ( Blue Sensitivity ) 15 X 6 , Intensifying Screen ( Blue Sensitivity ) 6½ X 8½ , Intensifying Screen ( Blue Sensitivity ) 8 X 10 , Intercostal Drainage Bag All Size , Interferon Beta-1A 30Mcginj. , Intermittent Electric Pneumatic Leg Compression Device With Pump Per Pair , Internal - External Biliary Drinage Catheter , Internal Externalbiliarydrainagecatheter 8 F And 10F , Internal External Biliary Drinage Catheter Set , Intra Cameral Epitrate Inj. , Intra Cameral Pilocarpineinj. , Intra Cameral Xylocaine Inj. , Intracath 16G. , Intracranial Stent16 Wire Nitinol Braiding With Sliding Cell Technology Like Leo+. Two Radio-Opaque Helicoidal Markers Which Run On Entire Body Of Stent.Flared Ends For Better Wall Apposition In Tight Curves.Compatible With Vasco 21 / 25 / 28, Included Inside Stent Packing. Re-Sheathable Upto 90%, Available In Diameter Of 3.5 / 4.5 / 5.5 Mm Sizes With Various Lengths Like 18Mm To 75Mm. , Intracranial Stentlow Profile 16 Wire Nitinol Braiding With Sliding Cell Technology Like Leo+ Baby. Two Radio-Opaque Helicoidal Markers Which Run On Entire Body Of Stent.Flared Ends For Better Wall Apposition In Tight Curves.Compatible With Vasco 10 ( 0.017 ) , Eclipse 2L. Re-Sheathable Upto 90, Available In Diameter Of 2.0 / 2.5 / 3.0 Mm Sizes With Various Lengths Like 12Mm To 35Mm. , Intrauterine Access Balloon Catheter9f , Intravenous Set With Airway And Needle ( Adult ) As Per Drugs Act. Specification , Intravenous Set With Airway And Needle ( Pediatrics ) As Per Drugs Act. Specification , Intravesical Bcg Vaccine ( Oncovac ) ; 40Mg / Vial , Introducer Needle 18G X 7Cm , Introducer Needle 20G X 4Cm , Introducer Needle 21G X 4Cm , Introducer Sheath 5F Femoral , Introducer Sheath 6F Femoral , Introducer Sheath 7F Femoral , Intubating Lma ( Ilma ) Size ( 3, 4, 5 ) Size ( 3, 4, 5 ) , Intubating Stylets , Iodinated Non Ionic Contrast Iohexol 100Ml ( Omnipaque ) 350 , Iodoform 500 Gm Powder , Ionic Contrast Media 60% 20 Ml.Inj. , Ionic Contrast Media 60% 50 Ml.Inj. , Ionic Contrast Media 76% 50 Mlinj. , Ipratropium Bromide 40 Mcg + Solbutamol200 Mcginhaler , Irinotecan 100 Mg Inj ( 1 Ml Amp ) , Iron + Folic Acid 300Mg+ 0.5Mg Cap. , Iron 2Ml Inj. , Iron And Folic Acid Enteric Coated . Ferrous Sulphate Ip To Ferrous Iron 100 Mg And Folic Acid Ip 0.5 Mg Granulestab , Iron And Folic Acid Enteric Coated . Ferrous Sulphate Ip To Ferrous Iron 100 Mg And Folic Acid Ip 0.5 Mg Granules Tab. , Iron And Folic Acid Enteric Coated Tab Dried Ferrous Sulphate Equ. To Ferrous Iron 100 Mg And Folic Acid 0.5 Mg ( Blue Tablet ) , Iron Dextran50 Mg El Iron / Ml Inj. , Iron Drop15ml Eye Drop , Iron Sorbitolinj. , Isoflavones 60 Mg. In Control Release Form Cap , Isoflavones 60 Mg. In Control Release Form Cap. , Isophane Insulinip, Monocomponent Human Insulin Biosynthetic ( R-Dna Origin ) Each Ml Suspension Contains 40 Iu ( 10Ml Vial ) Inj. , Isoprenaline 2 Mg / Ml Inj. , Isoprenaline 2Mg / Ml Ampoule Injection , Isopropyl Alcohol Ip 55.0% W / W, Purified Water Ip 10.0% W / W, Propellant Hydrocarbon 35.0% W / Waerosol Spray 200Gm . Spray , Isosorbide Dinitrate ( 10Mg ) Tab. , Isosorbide Dinitrate ( 5Mg ) Tab. , Isosorbide Dinitrate Ip - 5Mg Tab. , Itraconazoleointment , Itraconazole Eye Drops 1% 1Ml Eye Drop , Iv C Filter , Iv Cannula Butterfly Sizes - 20G, 22G, 24G, , Iv Cannula With Inthracathsize 20G With Inj.Valve ( Port ) . , Iv Cannula With Inthracathsize 26G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 16G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 18G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 22G With Inj.Valve ( Port ) . , Iv Cannula With Inthracath Size 24G With Inj.Valve ( Port ) . , Iv Codan Drip Set . , Iv Extension Set With Three Way --10 Cm , Iv Extension Set With Three Way --100 Cm , Iv Extension Set With Three Way --150 Cm , Iv Set - 4X1.5 ( 0.80 X 38Mm ) Diameter . , Iv Set With Luer Lock , J Tipterrumoglidewire Beta0.022, 0.027 Inch, 150 Cms , J Tipultra Stiff / Super Spport Wire0.018 & 0.014Inch , J Tip Amplatz Ultra Stiff Wire0.035 Inch, 260 Cm, 300 Cm , J Tip Terrumoglidewire0.035 Inch 150Cm , J Tip Terrumoglidewire0.035 Inch, 150Cm, 260Cm , Jejunal Feeding Tube , Jelly Ecg Jelly 250 Gms , Jelly Ecg Jelly 250 Gms Jelly , Jelly Ultra Sound Jelly 250Ml Bottle , Jelly Ultra Sound Jelly 250Ml Bottlejelly , Kallis Pad. , Kenamycin 75Gm. Inj. , Ketamine 100 Mg2ml Inj. , Ketamine Hydrochloride 10Mg / Ml ( 10Ml Vial ) Inj. , Keto Diastix Strip 100Pcs , Ketoconazole 0.02 Ointment , Ketoconazole Ointment 2% 15Gm Tube ( 15 Gm ) , Ointment , Ketorolac Tromethamine + Ofloxacin 5Ml Eye Drop , Ketotifen 5Ml Eye Drop , Knee Cap Large . , Knee Cap Medium . , Knee Cap Small . , Knee Cap With Hinges . , Kojic Acid+Arbutin+Mulberry Extract+Octinoxateointment , Kojic Acid+Vit Cointment , L- Alanyl-L-Glutamine Ffs Bottle 50Ml Iv , L Argine Garanules 5Gms. , L- Isoleucine 560 Mg I - Methoionine 6.8 Mg I - Tryptophan 3 Mg I- Leucine 10 Mg & Arginine Combinationffs Bottle 200 Ml Iv , L S Belt Padded With Dc S / M / L , L S Belt With Pelvic Support S / M / L , L S Frame S / M / L , Labetalol 100 Mgtab , Labetalol 100 Mg Tab. , Labetalol ( 100 Mg ) , Tablet , Lacosamide 100 Mginj. , Lacosamide 200Mg / Vials Injection , Lactic Acid I P 6%W / Wglycine I P 3%W / Wammonium Chloride I P 0.5%W / Wsodium Chloride I P 0.5%W / Wpotassium Chloride I P 0.5%W / Wclacium Lactate I P 0.5%W / Wmagnesium Chloride I P 0. 3%W / Wsodium Dihydrogen Phosphate Dihydrte I P 0.5%W / W 50Gm.. , Lactobacillus Acidophilus & Bifidobacterium Capsulecap Cap , Lactobacillus ( ( Lactobacillus 60 Million Spores ) ) , Tablet , Lactogen Powder No-1, 400Gms Powder , Lactulose 10 G / 15 Ml Oral Solution Sachets Sachet , Lactulose Solution Usp Each 5 Ml Cointains Lactulose Concentrate Usp Equaient To Lactulose 3.325Gm Aqueous Base Q.S ( 200Ml ) Syp , Lactulose Solution Usp Each 5 Ml Cointains Lactulose Concentrate Usp Equivaient To Lactulose 3.325Gm Aqueous Base Q.S ( 200Ml ) Syp. , Lactulose Syrup 200Mlsolution , Lalanine 8.2G + Lglutamine13.46 Inj. , Lamino Spinal Material 50Gsm. Sms Polypropylene Water Repallant Sheet Size 1.5X3m. Incise Sheet 15X35cm. Poly Sheet Lining 1.20X1.20M . , Lamotrigine25 / 50 Tab. , Lancet Point Spinal Needle Sets ( Quincke ) All Size . , Laparoscopic ( 33Cm ) L Hook With Ptfe Coated Ez Clean Electrosurgicla Tip , Laparoscopic Absorbable Mesh Tacker 5 Mm With 30 Preloaded Pgla Tacks Having Ratcheted Mechanism Providing Tactile Feedback When Firing. Us Fda Approved , Laparoscopic Non-Absorbable Mesh Tacker 5 Mm With 30 Preloaded Titanium Tacks Having Ratcheted Mechanism Providing Tactile Feedback When Firing. Us Fda Approved. Us Fda Approved , Laproscopic Drape, Size:150 X 250 Cm, Aperture:30 X 35Cms, 1 Kit , Laproscopic Port Washers, For 10Mm Trocar , Laproscopic Port Washers, For 5Mm Trocar , Large Acetyl Homopolymer Ligation Clip. Usfda Approved. Non Absorbable, Inert, Non Conducive, Radiolucent. Does Not Interfere With 3 Tesla, Mri, And Ct & X Ray Diagnosis. Should Be Iso 10993-1 Compatible. Cartridges Should Have Self-Adhesive Backing. , Large Size ( 26X15x3.2Cm ) Polyurethane Open Cell Reticulated Hydrophobic Dry Foam Dressing With Micro-Bonded Silver. Pore Size 40-50 Ppi. Usfda Approved . , Large Size ( 6.2 X 12.5Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Large Size Abdominal Dressing With Non Adherent For Abdominal Wounds. Usfda Approved. . , L-Arginine I.P. 3Gm Proanthocyanidin 75 Mgrespule , Larygenal Mask Airway Protector- Sterile, Phthalate Free, Single Use Silicone Material Airway Tube With Dynamic Curve And Elongated Cuff To Facilitate The Upper Esophageal Seal. Recommended Maximum Intracuff Pressure Of 60 Cm H20, Unique Cuff Pilot Technology ( In-Built Manometry ) For Continuous Cuff Pressure Monitoring, Allows Direct Intubation With Dual Gastric Access And Mr Safe, Available In Size 3, 4, 5 With Intubating Ability Of Et Tube Having Size Ranging From 6.5 To 7.5 And Larger Og Tube Insertion Ability Of 16 To 18 Fr Respectively. , Laryngeal Mask Airway Blockbuster Disposable Silicone .Fourway Connector Makes It Easy To Fix After Placement, Itegrated Bite Block Prevents Airway Occlusion, Airway Tube Is More Than 95 Degree Angulated Short Airway Tube Provides Easy Insertion And Matches Oropharyngeal Curve, Inlet And Outlet Of Gastric Access Channel Design For Easy Insertion Of Gastric Tube, Sputum Collection Device Can Collect Small Quantity Of Sputum, Guidance Device Allows The Et Tube To Direct Towards Laryngeal Opening At 30 Degree Angle, Which Enhances Success Rate Of Endotracheal Intubation, Better Flexibility And Biocompatibility With Silicone Material. Size - 1, 1.5, 2, 2.5, 3, 4, 5, Should Have Fda And Ce Marked , Laser Fiber - End Firing, 365 Micrometre, Compatible With 100W Laser System , Laser Fiber - End Firing, 550 Micrometre, Compatible With 100W Laser System , Laser Fiber - Side Firing, 550 Micrometre, Compatible With 100W Laser System , Lasilactone 40Mg Tablets , Latanoprost 50Mcg / Ml. 2.5Ml Eye Drop , Latex & Pvc Free Three Chambered Bag 625 Ml ( 740 Kcal ) With Mct Lct Ratio 1:1 For Central Venous Infusion. , Latex & Pvc Free Three Chambered Bag 625 Ml ( 740 Kcal ) With Mct Lct Ratio 1:1 For Central Venous Infusion. , Latex Free Porous & Permeable Elastic Adhesive Bandage 15 Cm , Latex Free Porous & Permeable Elastic Adhesive Bandage 15 Cm , Latovision 0.005% Latanoprost Eye Drop 2.5Mleye Drop , Lead Appron -Skirt / Waist Type , Lead Aprons Adult Size , Lead Aprons With Detachable Thyroid Shield; Size: Large 0.5 Mm Lead Equivalent Radiation Protection , Lead Aprons With Detachable Thyroid Shield; Size: Medium 0.5 Mm Lead Equivalent Radiation Protection , Lead Aprons With Detachable Thyroid Shield; Size: Small, 0.5 Mm Lead Equivalent Radiation Protection , Lead Curtain , Lead Divider 12 X 5 , Lead Divider 15 X 6 , Lead Glass For Dsa 2X4 , Lead Gloves; 6.5 Size , Lead Gloves; 7 Size , Lead Gloves; 7.5 Size , Lead Gown Adult Size , Lead Lettersa To Z , Lead Letters R & L , Lead Markar , Lead Numbers 0 To 9 , Lead Pass Box , Lead Sheilds 11 X 6 , Lead Sheilds 12 X 6 , Lead Sheilds 14 X 17 , Lead Sheilds 14 X 7 , Lead Sheilds 15 X 6 , Lead Sheilds 17 X 7 , Lead Sheilds 7 X 4 , Lead Sheilds 9 X 5 , Lead Table Shield; Saddle Bag Style, Around 52 X 18 1 / 2 X 12 Size, 0.5 Mm Lead Equivalent Radiation Protection , Lead Under-Table Shield; For Attachable Into Table Side Rails, Around 36 X 36 Size0.5 Mm Lead Equivalent Radiation Protection , Lectodex 500Gm. Powder , Led Shield Cover , Led Viewing Box Size 14 X 17 , Left Heart Vent Catheterswith Perforated Tip, Malleable Bodies With Depth Mark, All Vents Should Terminate With A Vented Or Nonvented ¼ Inch Connector, Sizes- 15, 16, 18 , Left Heart Vent Catheters With Perforated Tip, Malleable Bodies With Depth Mark, All Vents Should Terminate With A Vented Or Nonvented ¼ Inch Connector, Sizes- 15, 16, 18 Fr , Lenolidamide 20Mg. Capsule , Leuprobide Depot3.75Iu Inj. , Leuprolide Depot Inj ( 3.75Mg ) , Injection , Levipril 65Mg / Ml Injection , Levodropropizine Ph Eur 30 Mg+Chlorpheniramine Maleate Ip 2Mg / 5Ml, 120Ml Bottle Syp. , Levolin ( 0.6Mg / 2.5Ml ) --Pack Of 5Respules , Levosalbutamol 0.31Mg, Each Respule 2.5 Ml , Levosalbutamol 0.63Mg, Each Respule 2.5 Ml , Levosalbutamol 1.25Mg, Each Respule 2.5 Ml , Levosimendan 12.5Mg / 5Ml Vial Injection , Lidocaine 4%Injection 30Ml Vial , Lidocaine And Prilocaine Cream Usp30gmcream , Lidocaine Hydrochloride 1% ( 10Mg / Ml ) Inj. , Lidocaine Usp 1.0% W / W, Cetrimoide Ip 0.1% W / W, Polyvinyl Polymer 2.8% W / W, Solvent And Propellant Q.S. To 100.0% W / Waerosol Spray 50Gsolution , Lidocaine Usp 1.0% W / W, Cetrimoide Ip 0.1% W / W, Polyvinyl Polymer 2.8% W / W, Solvent And Propellant Q.S. To 100.0% W / Waerosol Spray 50G . Spray , Lifestent:Sfa Stent Self Expending Usfda Approved For Sfa And Popliteal Nitinol Stent With Unique Triple Helix Design Structure For Multi-Dimensional Flexibility With Unique Delivery System Having Both Thumb Wheel And Pin & Pull Mechanism. Diameter 5Mm -7Mm Length: 40Mm, 60Mm, 80Mm, 100Mm, 120Mm, 150Mm &170Mm With Shaft Length 80 Cm And 135 Cm , Ligation Metal Clips Small , Ligation Polymer Clips Large , Ligation Polymer Clips Medium , Ligation Polymer Clips Medium And Large , Lignocaine 5% Spinal, 2Mlinj. , Lignocaine Hydrochloride 4% Eye5ml Vial5ml Eye Drop , Lignocaine Topical 10%. Solution , Lignocaine Topical 4%. Solution , Lignocaine Tropical Sol. Ups 30Ml Eye Drop , Lignocaine Viscousointment , Lipid Emulsion 20% 500Ml With Fish Oil, Soybean Oil And Vitamin E ( 1000 Kcal ) Iv , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 10 Cm X 25 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 13 Cm X 13 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 15 Cm X 15 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 20 Cm X 20 Cm , Lipido-Colloid Tlc Pu Foam Dressing ( 5 Layer ) With Silicon Adhesive Border, Size 8 Cm X 8 Cm , Liquid Embolic System Used For Avm Management Liquid Embolic System Evoh Co-Polymer For Complete Occlusion In Controlled Embolization Procedures Like Avm, Compatable With Item Of Sr. No 1, 2 And 3. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Liquid Embolic System Used For Avm Managementliquid Embolic System Evoh Co-Polymer For Complete Occlusion In Controlled Embolization Procedures Like Avm, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approvedpack With 1.5Ml Liquid Embolic And 1.5Ml Dmso Per Pack , Liquid Hand Wash Solution With Dispenser ( 500Ml ) , Liquid Paraffin?: ?3.75 Ml, Magnesium Hydroxide, Milk Of Magnesia 170Ml Syp. , Liquid Soap 1Ltrsoap , Lithium -450Mg. Tab. , Lma Supreme Size ( 3, 4, 5 ) , Lomustin 40 Mg Cap. , Long 440 Mm, Battery Operated 60 Mm Articulating Endo Cutter ( 45 Degree Both Side ) With A Disposable Battery Pack, 360 Degree Rotation Shaft, 6 Row Staples Offering 60Mm Staple Line And 57 Mm Cut Line, Closed Channel Anvil, Delivering System Wide Pre Compression, ( Proximal 8 Mm, Distal 22 Mm ) , 3 Point Gap Control, Manual Override Safety Feature, Interchangeable Cartridge Options Of 1.0, 1.5, 1.8, 2.0 Closed Staple Height , Long Ergonomic ( 36Cm ) , 5Mm Laparoscopic Shears With 18Mm Curved Coated Blade, Capable Of Sealing, Vessels Up To And Including 7Mm, 360 Degrees Rotation, With Att Compatible With Gen 11 , Long Ergonomic 23Cm, 5Mm Laparoscopic Shears With 15Mm Curved Coated Blade, Capable Of Sealing Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, With Att Compatible With Gen11 , Long Term Hemodialysis Catheter Doluble Lumen 15 Fr , 19, 21, 23, 24, 28, 30, 32, 36, 40 Cm , Long Term Runnel Cuffed With Split Tip, Pre Loaded Hollow Style Hd Antimicrobialcatheter, Should Have Air Guard Valve L-23Cm. = Fr-14.5 . , Long Term Runnel Cuffed With Split Tip, Pre Loaded Hollow Style Hd Antimicrobial Catheter, Should Have Air Guard Valve L-19Cm. = Fr-14.5 . , Long-Term Heamo-Dialysis Catheter Double-Lumen Radio Opaque Split-Tip Catheter 14.5 Fr X 19 Cm With Air Guard Valves Introducer Peel-Apart Sheath 15 Fr, 10-12Fr Dilators, 70 Cm Guide Wire 0.97 Mm X 70 Cm, Tunneled, 18 G Needle & 8 Fr Vessel Dilator , Long-Term Hemo-Dialysis Catheter Duble-Lumen Radioopaque Split-Tip Catheter 14.5 Fr X 19 Cm With Airguard Valved Introducer Peel-Apart Sheath 15 Fr, 10-12Fr Dilators, 70 Cm Guidewire 0.97 Mm X 70 Cm, Tunneler, 18 G Needle & 8 Fr Vessel Dilator , Long-Term Hemo-Dialysis Catheter Duble-Lumen Radioopaque Split-Tip Catheter 14.5 Fr X 27 Cm With Airguard Valved Introducer Peel-Apart Sheath 15 Fr, 10-12Fr Dilators, 70 Cm Guidewire 0.97 Mm X 70 Cm, Tunneler, 18 G Needle & 8 Fr Vessel Dilator , Loop Nylon, 0, 72, ½ Circle, Round Body , Loperamide 2Mg. Tablet , Lorazepam2 Mg / Ml1 Ml Vial , Lorazepam2 Mg / Ml2 Ml Vial , Lorezepam 4Mg. / Ml Inj. , Loteprojnal Etabnate 02%10Mleye Drop , Low Adherent Absorbent Wound Dressing With A Polyester Perforated Wound Contact Layer Size 50Cmx7mtr Roll , Low Molecular Weight Dextran 40000 Inj. , Low Pressure Cuffed Tracheostomy Canula With Sterile Disposable Or Reusable Inner Canula , Low Profile Chemo Plastic Port With Silicon Catheter, Desilet Anti Kinking Sleeves, Fr-9.6, 6.6, 3.9. . , Lp Needle16 G , Lp Shunt , Lp Shunt . , Ls Corset , Lumbar Drainage System ( Lumbar Drain ) , Lumbar Drainage System ( Lumbar Drain ) , Lumbar Puncture Needle20g , Lumber Peritonal Shunt System - Each System Is Supplied Complete With One Lumbar Catheter 40Cm Long. One Periitoneal Catheter 60Cm Long One Special Lumbar Catheter Connecters, Two Suture Collar & One 14 Gauge Thin Wall Touhey Needle. The System Is Sterilized By Ethylene Oxide Gas And Packed In Double Peel Open Packaging. . , Lung Excer Sizer. , Lutein + Zeaxanthin , Vita , C, E, S, Zinc Cap , Lutonix Drug Coated Balloon Drug Coated Balloon With 2 ?G / Mm2 Dose Of Paclitaxel With Polysorbate & Sorbitol As Carrier Which Will Deliver An Optimal, Therapeutic Drug Dose To The Target Vessel Wall After A Minimum 30 Second Inflation Time035 With 120Cm Shaft: Diameter 4Mm -6Mm , Lengthupto 150Mm / 035 With 75Cm Shaft Diameter 5-12Mm Length 60Mm / 014 With Shaft 150Cm Diameter 1.5Mm -3Mm Length Upto 120Mm , Mac Intosh , Mackintosh -Size 1100Mm Width X 30 Meters Length Double Colour Water Proof Rubber Marked Isi Hospital Rubber Sheeting Is:4135-1974 Packing And Making : As Per Clause No 4.1 And 4.3 / Mtr . , Mackintosh Double Colour Water Proof Rubber Marked Isi Hospital Rubber Sheeting Is:4135-1974 Packing And Making : As Per Clause No 4.1 And 4.3 / Mtr , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene. 6X12 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.7.6X15 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.10X15 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.15X15 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.15X30 Cm Sterile , Macro Porus Partially Absorbable Mesh Made Up Of Approximately Equal Parts Of Polypropylene Monofilament Fiber ( 6-0 ) And Poliglecaprone 25 Monofilament Fiber ( 5-0 ) With Pore Size 2.7 Mm Having A Weight Of 39 G / M2 And Containing Blue Orientation Stripes Of Polypropylene.30X30 Cm Sterile , Magills Forcepsadult Size , Magills Forcepspaediatric Size , Mag-Mag Oint Ointment , Magnesium Hydroxide + Aluminium Hydroxide Simethecon 250 Mg + 250 Mg + 50 Mg / 5 Ml 170 Ml Bottle ( Syrup ) , Syrup , Magnesium Sulphate25% W / V, Amp Inj. , Magnesium Suplhate Ection I.P.50 % W / V 10Ml Ampinj. , Magnesium Suplhate Injection I.P.50 % W / V ( 1 Ml Amp ) ( 1 Ml Amp ) , Ampule , Maintains Predictable Fibrinogen Ratio Within Physiologic Ranges , Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures , Maintains Predictable Fibrinogen Viscosity In A Range Of Temperatures , Maleurethral Dilator Set; Teflon / Latex , Malecot Catheter , Malecot Catheter ( With Needele ) , Malvix Band . , Mammography Casette With Intensifying Screen 18X24 Cm 18X24cm , Management , Ce Approved., 1000 Ml , Manifold Right Off 3-Way , Mannitol Inj. 10% 350Ml Bottle ( ) , Injection Solution For , Marker Bands Are Designed To Increase Procedure Efficiency By Minimizing Fluoroscopy Exposure With Sheath Profile 5F Compatible Up To 8 X 80 Mm*. Size- Diameters: 3 - 12 Mm, & Lengths: 20 - 300 Mm. , Material Of Housingpolycarbonate ( Pc ) , Mattress Protectorshould Made Up Of Breathable And Spacer Fibers. Breathable, Antimicrobial Finish, Elastic Fit, Washable, 36 X 72 Inches, Colour White, Blue And Freen , Measure Volume Drip Set. , Meatal Dilator - Male , Mechanical Bileaflet Aortic Heart Valvemade Up Of Pure Pyrolytic Carbon Should Have Optimal Profile Height Should Have 80-90 Degree Leaflet Opening Angle Should Have Leaflet Guard Design Should Have Flared Inlet At Inflow. Sizes 19Mm, 21Mm, 23Mm, , Mechanical Bileaflet Aortic Heart Valve Bileaflet Mechanical Heart Valve Rotatable, The Material Used Is Pyrolytic Carbon On A Graphite Substrate, 80-90 Degree Opening Angle Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Mechanical Single Leaflet Aortic Heart Valvemade Up Of Pure Pyrolytic Carbon Should Have Optimal Profile Height Should Have 80-90 Degree Leaflet Opening Angle Should Have Leaflet Guard Design Should Have Flared Inlet At Inflow. Sizes- 19Mm, 21Mm, 23Mm , Mechanical Single Leaflet Aortic Heart Valve Sinlge Leaflet Tilting Disc Mechanical Heart Valve Rotatable Aortic Valve Size 17Mm To 27Mm, Mitral Valve Size 19Mm To 33Mm , Meclizine 25 Mg Tab. , Meclizine 25Mg. Tab. , Mecobalamin Jp 1000Mcg ( B12 ) , Pyridoxine Hydrochloride Ip 100Mg ( B6 ) , Nicotinamide Ip 100Mg ( B3 ) 2Ml Inj. , Medical Oxygen Central Gas Pipe Line Oxygen Outlet , Medical Oxygen Central Gas Pipe Line Vacuum Jar , Medical Oxygen Central Gas Pipe Line Vacuum Outlet , Medical Oxygen Sensor ( Oom202 ) For Ventilator , Medical Penlights , Medicast 3 , Medicated Spirit 1Ltr. Solution , Medicated Spirit 5Ltr. Solution , Medium Large Acetyl Homopolymer Ligation Clip. Usfda Approved. Non Absorbable, Inert, Non Conducive, Radiolucent. Does Not Interfere With 3 Tesla, Mri, And Ct & X Ray Diagnosis. Should Be Iso 10993-1 Compatible. Cartridges Should Have Self-Adhesive Backing. , Medium Size ( 18X12.5X3.2Cm ) Polyurethane Open Cell Reticulated Hydrophobic Dry Foam Dressing With Micro-Bonded Silver. Pore Size 40-50 Ppi. Usfda Approved . , Medium Size ( 3.5 X 5.2Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Medium Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Medium / Large Size ( 5.5 X 8.8Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Mefenamic Acid + Drotaverine Hcl ( 250 Mg + 80 Mg ) , Tablet , Melatonin 3Mg Tab. , Menadione 10Mg / 1Ml Inj. ( Vitamin K-3 And Vitamint K ) , Meningococcal Polysaccharide Vaccine Inj. , Meningococcal Vaccine , Mercaptopurine 50Mg.Tablet , Mersilene Polyester Fibre Tap U.S.P 30Cm X 5Mm With D.A. Needle , Mesalamine 800Mg. Cap. , Methacarbamol 100 Mg. Inj. , Methotrexate 10 Mg Tab. , Methotrexate 15 Mg Tab. , Methotrexate 20 Mg Tab. , Methotrexate 5 Mg Tab. , Methotrexate 7.5 Mg Tab. , Methotrexate ( 10 Mg ) , Tablet , Methyl Cellulose Drops2%10Mleye Drop , Methyl Cellulose / Visco Elastic Pfs 2Ml Eye Drop , Methyl Prednisolone - 32 Mg Tab. , Methyl Prednisolone - 8 Mgcap. , Methyl Prednisolone ( 8Mg ) , Tablet , Methylcellulose Eye Drops , Metoclopramide- 10Mg Tab. , Metoprolol ( 5Mg / 5Ml Ampoule Injection , Metoprolol 1Mg. / Ml Inj. , Metoprolol Inj 1 Mg / Ml ( 5Ml Vial ) , Injection Solution For , Metresses 3X6 With Raxine Cover 4 Density , Metronidazole 100Mg / 5Ml Syrup ( 30Ml ) Syp. , Metronidazole 15Gm 0.01 Ointment , Miconazole 1% + Beclamethasone Dipropionate 0.025%Ointment , Miconazole Ear Drops 5Ml Eye Drop , Micro Catheter 1.8F Fine Cross / Corsier / Unirail 150Cm , Micro Drip Set With Chamber As Per Drugs Act. Specification . , Micro Laryngeal Tube- Clear Micro Laryngeal Tube Is Made Of Pvc With High-Volume Low-Pressure Cuff. Having Thinner And 360Mm Longer Length Tube Body With Smaller Diameter, Designed For Interventions In The Laryngeal Space. Clear Micro Laryngeal Tube, Has Semi-Seated Connector, Valve For Luer And Luer-Lock Syringes, Continuous X-Ray Marker And Graduated. Usfda Approved , Micro Titanium Ligation Device With Locking Mechanism, Sterile, Usfda Approved. Cartridges Should Have Self-Adhesive Backing. , Micro Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing And Precise Tip To Tip Closure. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Microcatheter Superselective Braidedfor Avm Embolisation Super-Selective Flow Directed Braided Micro Catheter Usable Length At Least165cm With Hydrophilic Coating Used For Brain Avm Treatment. Dmso And Compatable With Item Of Sr No 5. Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved. , Microcatheter Straight Endhole For Intracranial Stenting 0.027Inch Id 2.8 / 2.8F Od Compatable With 0.014 Inch Guide Wire Straight Tip Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.027 Id 2.8 / 2.8F Od Braided, 145 Cm Usable Length, Permitting 0.014“ Guide Wire Used For Intracranial Stenting, Should Be Compatable With Item Of Sr No 53 — 58. Used Forneurovascuiarpurpose.Should Be Dcgi And Usfda Approved , Microcatheter Straight Endhole For Intracranial Stenting 0.027Inch Id 2.8 / 2.8F Od Compatable With 0.014 Inch Guide Wirestraight Tip Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.027 Id 2.8 / 2.8F Od Braided, 145 Cm Usable Length, Permitting 0.014 Guide Wire Used For Intracranial Stenting, Used For Neurovascularpurpose.Should Be Dcgi And Usfda Approved , Microcatheter Straight / Preshaped For Aneurysm Coiling 0.017 Inch Id 2.1 / 1.7F Od 150 Cm Length Compatable With 0.014 Inch Guide Wire Straight Tip / Preshaped 45* & 90* Endhole Single- Lumen Microtatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting0.024 Guide Wire For Intracranial Aneurysm Coiling, Should Be Compatable With Item Of Sr. No. 1, 2 & 5-45. Used For Neurovascular Purpose.Should Be Dcgiand Usfda Approved , Microcatheter Straight / Preshaped For Aneurysm Coiling 0.017 Inch Id 2.1 / 1.7F Od 150 Cm Length Compatable With 0.014 Inch Guide Wirestraight Tip / Preshaped 45* & 90* Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting 0.014 Guide Wire For Intracranial Aneurysm Coiling, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Straight / Preshpaed Foraneurysm Coiling 0.017 Inch Id 2.4 / 1.9F Od 150 Cm Length Compatable With 0.014 Inch Guide Wirestraight Tip / Preshaped 45* & 90* Endhole Single-Lumen Microcatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting 0.014 Guide Wire For Intracranial Aneurysm Coiling, Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approvedmechanically / Electrically Detachable Bare Paltinum , Microcatheter Straight / Preshpaed For Aneurysm Coiling 0.017 Inch 10 2.4 / 1.9F Od 150 Cm Lengthcompatable With 0.014 Inch Guide Wire Straight Tip / Preshaped 45* & 90” Endhole Single Lumen Microcatheter For Super Selective Catheterization With 0.017 Id 2.1 / 1.7 F Od Braided 150 Cm Usable Length Dual Radiopaque Markers Permitting 0.014 Guide Wire For Intracranial Aneurysm Coiling, Should Be Compatable With Item Of Sr. No. 1, 2 &5-45. Used For Neurovascular Purpose. Should Be Dcg I And Usfda Approved Mechanically / Electrically Oetachable Bare Paltinum , Microcatheter Superselective Braided For Avm Embolisationsuper-Selective Flow Directed Braided Micro Catheter Usable Length At Least165cm With Hydrophilic Coating Used For Brain Avm Treatment. Dmso Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved. , Microcatheter Superselective Detachable For Avm Embolisation Super-Selective High Flow Directed Micro Catheter With Detachable Tip With Hydrophilic Coating Used For Brain Avm Treatment, Dmso And Compatable With Item Of Sr. No 5. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Superselective Detachable For Avm Embolisationsuper-Selective High Flow Directed Micro Catheter With Detachable Tip With Hydrophilic Coating Used For Brain Avm Treatment, Dmso And Compatable With Item Of Sr. No 5. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Superselective Non Braided For Avm Embolisation Super-Selective High Flow Directed Non-Braided Micro Catheter Single Lumen, Endhole, Usable Length L70cm, With Hydrophilic Coating Used For Brain Avm Treatment, Dmso And Compatable With Item Of Sr. No 5. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcatheter Superselective Non Braided For Avm Embolisationsuper-Selective High Flow Directed Non-Braided Micro Catheter Single Lumen, Endhole, Usable Length 170Cm, With Hydrophilic Coating Used For Brain Avm Treatment, Dmso Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Microcoilsfor Embolization , Micronised Flavonoid Extract 500Mg Tab. , Micronized Progesterone 200 Ml Syp. , Micronized Purified Flavonoid Fraction 500Mg. Tab. , Microporesurgical Tape 3, Inch , Microporesurgical Tape 4, Inch , Microporesurgical Tape 6 Inch , Microporous Antimicrobial Fabric Tape All Size , Micropuncture Set4 F , Micropuncture Set4 Fr , Micropuncture Set 7Cm & 11Cm , Microscope Cover , Microwire For Catheter Tracking 0.014 Inch 200 Cm Length High Torque Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014 200 Cm Hydrophilic Guidewire With Torque Device For Use With Infusion Catheters Compatible With Sr No. 2. Used For Use Neurovascular Purpose, Should Be Dgci And Usfda Approved , Microwire For Catheter Tracking 0.014 Inch 200 Cm Lengthhigh Torque Stainless Steel With A Radiopaque Distal Platinum Coil Tip 0.014 200 Cm Hydrophilic Guidewire With Torque Device For Use With Infusion Catheters Compatible With Sr No. 2. Used For Use Neurovascular Purpose, Should Be Dgci And Usfda Approved , Midazolam 5 Mg / Ml-Nassal Spray Nasal Spray , Mifepristone 200 Mg + Misoprostol 200 Mcg Kit Of 5 Tab , Mifepristone 200 Mg + Misoprostol 200 Mcg Kit Of 5 Tab , Milkywhite Gel Based Hand Sanitizer, Ethanol ( 60%-65%, Benzalkonium Chloride 0.09% - 1% 100Ml Gel , Milrinnone 1Mg / Ml, 10 Ml Vial ( Inj. ) , Milrinone 1Mg / Ml, 10Ml Vialsinj. , Mini Suction Drain Set , Minicap For Pd Catheter , Minoxidil Ip .....2.0% W / V In A Solution Base Ethyl Alcohol Ip Eq. To Absolute Alcohol ...60% V / V 60Mlointment , Miracle 3.0 , Miracle 6.0 , Mirage Micro Guide Catheter , Mirage Micro Guide Wire , Miscellanous Tablets , Misoprostol- 200Mcgtab , Mist Blowerwith Specialized Nozzle Utilizing A Micro Orifice For Fluid Delivery And A Separate Orifice For Gas Delivery With Malleable Shaft , Mist Blower With Specialized Nozzle Utilizing A Micro Orifice For Fluid Delivery And A Separate Orifice For Gas Delivery With Malleable Shaft , Mitrazapine-7.5Mg. Tab. , Mmr-Vialinj. , Mobile And Single Use Negative Pressure Wound , Modafinil 100Mg. Tab. , Moderate Indwelling Pur Catheter With 70%Isopropyl Alcohol Cap For Peripheral Veins With Siliconized Additional Port. . Sterilized . , Molded Cup Style Surgical N-95 Respirator Mask -Hydrocolloid Scar Free Nasal Pads To Prevent Cpcp, Bipap, And Oxy Mask, To Avoid Pressure Ulcers Or Bruises On The Nose. Sizes S / L. Ce Certified , Monifilament Polyamide3-0, 70-75Cm , 24-26Mm, 3 / 8 Circle, Reverse Cutting, , Monifilament Polyamide 2-0 75Cm , 39Mm, 3 / 8 Circle, Reverse Cutting, , Mono Components Insulin 5Mg. Inj. , Mono J Stent , Monofilament Black Polyamide Non Absorable Suture Usp Size 0 40Mm, 1 / 2 Circle Heavy Rb, 100Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 0 60Mm, Straight Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb, 100Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 1 48Mm, 1 / 2 Circle Heavy Rb Loop, 150Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 1 48Mm, 1 / 2 Circle Heavy Rc, 100Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 10 / 0 4Mm, 3 / 8 Circle Rb Micro Point, 25Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 10 / 0 6Mm, 3 / 8 Circle Spatulated Micro Point Da, 38Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 10 / 0 6Mm, 3 / 8 Circle Spatulated Micro Point, 38Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 2 90Mm, 3 / 8 Circle Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 2 / 0 45Mm, 3 / 8 Circle Rc, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 2 / 0 60Mm, Straight Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 3 / 0 16Mm, 3 / 8 Circle Prime Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 3 / 0 26Mm, 3 / 8 Circle Rc, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 3 / 0 60Mm, Straight Cutting, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 10Mm, 3 / 8 Circle Rc, 38Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Cutting, 90Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 19Mm, 3 / 8 Circle Cutting Pc-5, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 4 / 0 19Mm, 3 / 8 Circle Prime Cutting Pc-5, 60Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 5 / 0 12Mm, 3 / 8 Circle Prime Rc, 90Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 5 / 0 13Mm, 3 / 8 Circle Prime Rc P-3, 60Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Prime Cutting, 35Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 6 / 0 10Mm, 3 / 8 Circle Rc, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 6 / 0 13Mm, 3 / 8 Circle Prime Cutting Pc-5, 70Cms , Monofilament Black Polyamide Non Absorable Suture Usp Size 8 / 0 6Mm, 3 / 8 Circle Spatulated Micro Point, 38Cms , Monofilament Glycomer3-0 75Cm, Undyed19mm3 / 8 Circlereverse Cutting , Monofilament Glycomer3-0 75Cm, Undyed19mm3 / 8 Circlereverse Cutting ( Preferably Us Fda Aproved ) , Monofilament Glycomer3-0 75Cm, Violet26mm1 / 2 Circletaper Point , Monofilament Glycomer3-0 75Cm, Violet26mm1 / 2 Circletaper Point ( Preferably Us Fda Aproved ) , Monofilament Glycomer 631* 0 75Cm, Undyed37mm1 / 2 Circlereverse Cutting , Monofilament Glycomer 631* 0, 90Cm, Violet40mm1 / 2 Circletaper Point , Monofilament Glycomer 631* 1 , 90Cm, Violet40mm1 / 2 Circletaper Point , Monofilament Glycomer 631* 2-0 75Cm, Undyed37mm1 / 2 Circlereverse Cutting , Monofilament Glycomer 631* 2-0 75Cm , Violet26mm1 / 2 Circletaper Point , Monofilament Polyamide * 1 100Cm, Black40mm1 / 2 Circletaper Point , Monofilament Polyglyconate* Cv 5-0 75Cm , Green13mm1 / 2 Circletaper Point , Double Arm , Monofilament Polyglyconate* Cv 5-0 75Cm , Green13mm1 / 2 Circletaper Point , Double Arm ( Preferably Us Fda Aproved ) , Monofilament Polypropylene Mesh With Bioresorbable Polyglycolic Acid Fibers & Hydrogel Coating , Hydrogel Barrier To Minimize Tissue Attachment, Bioresorbable Coating = Sodium Hyaluronate ( Ha ) Carboxymethylcellulose ( Cmc ) , And Polyethylene Glycol ( Peg ) , Ability To Tailor ( Can Easily Be Cut To Customize Shape And Size ) Various Sizes , Monofilament Stainless Steel 2 5X45cm, 40Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 4 2X45cm, 48Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 5 2X75cm, 45Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 5 4X45cm, 48Mm1 / 2 Circleconventional Cutting , Monofilament Stainless Steel 6 2X45cm, 45Mm1 / 2 Circleblunt Point , Monofilament Stainless Steel 6 4X45cm, 48Mm1 / 2 Circleconventional Cutting , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1 36Mm, 1 / 2 Circle Tp Da 14Cms X 14Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1 36Mm, 1 / 2 Circle Tp Da 24Cms X 24Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1 36Mm, 1 / 2 Circle Tp Da 30Cms X 30Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1-0 36Mm, 1 / 2 Circle Tp Da 14Cms X 14 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 1-0 36Mm, 1 / 2 Circle Tp Da 24Cms X 24 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 2-0 36Mm, 1 / 2 Circle Tp 20 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Self Locking With Anchors Size 2-0 36Mm, 1 / 2 Circle Tp 30 Cms , Monofilament Synthetic Absorbable Polydioxanone Suture Size 1 40Mm, 1 / 2 Circle Rb Heavy 90Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 1 45Mm, 1 / 2 Circle Rb Heavy 90Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 1 50Mm, 1 / 2 Circle Rb Heavy Loop 150Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 2 / 0 31Mm, 1 / 2 Circle Rb 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 3 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 4 / 0 16Mm, 3 / 8 Circle Rc 45Cms Undyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 4 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 5 / 0 13Mm, 3 / 8 Circle Tp Da 70Cms Violet , Monofilament Synthetic Absorbable Polydioxanone Suture Size 5 / 0 16Mm, 3 / 8 Circle Rc 45Cms Undyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 6 / 0 11Mm, 3 / 8 Circle Rb Da 45Cms Dyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 6 / 0 13Mm, 3 / 8 Circle Cc Pc1 45Cms Undyed , Monofilament Synthetic Absorbable Polydioxanone Suture Size 7 / 0 9.3Mm, 3 / 8 Circle Tp Da 70Cms Violet , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 0 30Mm, 1 / 2 Circle Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 2 / 0 26Mm, 1 / 2 Circle Antiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 3 / 0 25Mm, 3 / 8 Circle Prime Cutting, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 3 / 0 26Mm, 1 / 2 Circle Angiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 3 / 0 60Mm, Straight Cutting, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Rc, 70Cms Undyed , Monofilament Synthetic Absorbable Polyglecaprone 25 Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Prime Rc Ps-3, 45Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 1 40Mm, 1 / 2 Circle Rb Heavy 90Cms Violet , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 1 50Mm, 1 / 2 Circle Rb Heavy Loop 150Cms Violet 65Mm & 122Cms , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 2 / 0 31Mm, 1 / 2 Circle Rb 70Cms Violet 26Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 3 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet 17Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 3 / 0 30Mm, 1 / 2 Circle Rb 70Cms Violet 17Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polydioxanone Suture Size 4 / 0 20Mm, 1 / 2 Circle Rb 70Cms Violet 17Mm , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 2 / 0 26Mm, 1 / 2 Circle Antiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 2 / 0 30Mm, 1 / 2 Circle Rb, 70Cms , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 3 / 0 25Mm, 3 / 8 Circle Prime Cutting, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 3 / 0 26 Mm, 1 / 2 Circle Antiglare Oval Rb, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 4 / 0 16 Mm, 3 / 8 Circle Rc, 70Cms Undyed , Monofilament Synthetic Absorbable Triclosan Coated Antibacterial Polyglecaprone 25 Suture Size 5 / 0 16 Mm, 3 / 8 Circle Rc, 70Cms Undyed , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 0 30Mm, 1 / 2 Circle Heavy Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 0 30Mm, 1 / 2 Circle Heavy Rb , 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 0 30Mm, 1 / 2 Circle Rb , 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 30Mm, 1 / 2 Circle Heavy Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 30Mm, 1 / 2 Circle Heavy Tc , 100Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 1 45Mm, 1 / 2 Circle Heavy Rc , 100Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb , 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Rb, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 22Mm, 1 / 2 Circle Cutting, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 25Mm, 1 / 2 Circle Rb, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 3 / 0 25Mm, 1 / 2 Circle Rb, 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 1 / 2 Circle Rb , 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Cutting Pc-3, 60Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Cutting Pc-3, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 4 / 0 16Mm, 3 / 8 Circle Prime Cutting, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 5 / 0 12Mm, 3 / 8 Circle Prime Rc, 90Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Rb Da, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 5 / 0 16Mm, 3 / 8 Circle Rb, 70Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 6 / 0 13Mm ( 282 Microns ) , 3 / 8 Circle Rb Da, 102Cms , Monofilament Synthetic Nonabsorbable Polypropylene Suture Usp Size 6 / 0 15Mm, 3 / 8 Circle Cutting Pc-3, 70Cms , Monopolar Cautery Forceps , Morphine Sulphate 1 Ml / Amp Inj. , Morphine Sulphate 20Mg. Tablet , Moxifloxacin Ophthalmic Solution Usp 0.5% Pfs 1. Solution , Moxinidine 100Mg. Tab. , Mpff, 450 Mg Diosmin Plus 50 Mg Hesperidin , Mri Implantable Port With Close-Ended Attachable Groshong Silicone Catheter 8 Fr, J Tip Guide Wire 0.89Mm X 45Cm, 18G Introducer Peel-Apart Sheath 8 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mri Implantable Port With Open-Ended Attachable Hickman Silicone Catheter 9.6 Fr, J Tip Guide Wire 0.97Mm X 50Cm, 18G Introducer Peel-Apart Sheath 10 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mri Implantable Port With Open-Ended Pre Attached Hickman Silicone Catheter 6.6 Fr, J Tip Guide Wire 0.97Mm X 50Cm, 18G Introducer Peel-Apart Sheath 7 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mri Implantable Power Port With Close-Ended Attachable Groshong Silicone Catheter 8 Fr, J Tip Guide Wire 0.89Mm X 45Cm, 18G Introducer Peel-Apart Sheath 8 Fr, Tunneler, Non-Coring Needle 22G, 12 Mi Syringe , Mucopolyssacharide Polysulfate ( Heparinoid ) Corresponding To 250 Iuointment , Mucus Extator . , Multi Vitamin Syrup 200Ml Syp , Multiband Trigger ( Gi Band ) . , Multifiltrate Dialysate Line ( 158 Ml ) Compatible With Multifiltrate Machine , Multifiltrate Substitute Line -1 Heater Bag ( Cvvhd / Cvvhdf=159 Ml ) Compatible With Multifiltrate Machine , Multifunctional Mask With The Attachment Of Nebulizer Mask, Venture Mask, Oxygen Mask, Aerosol Mask, Bipap, Cpap Mask With 7 Oxygen Tube. Fda Approved. ( Adult ) , Multifunctional Mask With The Attachment Of Nebulizer Mask, Venture Mask, Oxygen Mask, Aerosol Mask, Bipap, Cpap Mask With 7 Oxygen Tube. Fda Approved. ( Paediatric ) , Multiple Perfusion Set Withpressure Monitoring Lines;Multiport Tip / Integral Stopcock.Femaleluer On Single Inlet With 4 Legs. 7.6 Cm Length Leg With Wide Clamps. , Multiside Pore Catheter / Spary5 Fr , Multivitamin Syrup 60 Ml ( Each 5Ml Contains-Vitamin A ( Palmitate ) Ip 1600 Iu+Vitamin D3 Ip 200 Iu ( +Vitamin B2 Ip 1.00Mg+Vitamin B6 Ip 0.50Mg+Niacinamide Ip 15.00Mg+D-Panthenol Ip 1.00Mg ) , Syrup , Mupriocin 2% + Beclomethasone Diprop. .025%Ointment , Mycophenolate 1000 Mg Tablets , Mycophenolate 720 Mg Tablets , N.G.Tube 5, 6, 7, 8, 10 . , Nadifloxacine Ointment 15 Gmointment , Nanocrystaline Silver Coated Antimicrobial Barrier Dressing Wound Contact Layer 100% Cotton Top Layer 10Cm.X10cm , Nanocrystaline Silver Coated Antimicrobial Barrier Dressing Wound Contact Layer 100% Cotton Top Layer 10Cm.X20cm. , Nanocrystaline Silver Coated Antimicrobial Barrier Dressing Wound Contact Layer 100% Cotton Top Layer 5Cm.X5cm. , Naproxen Sodium 500Mg. Tab. , Nasal Prongs Adult Size , Nasal Prongs Paediatricssize , Naso Biliary Drinage , Naso Billary Drain Catheter 10 Fr , Nasogastrictube { Fr ) 10Fr , Nasogastrictube { Fr ) 12Fr , Nasogastrictube { Fr ) 14Fr , Nasogastrictube { Fr ) 16Fr , Nasogastrictube { Fr ) 8Fr , Nasogastric Tubes ( Ng Tube ) Size -14, 16, 18. , Nasogastric Tubes ( Ng Tube ) Size -5, 6, 7, , Nasogastric Tubes ( Ng Tube ) Size -8, 10, 12, , Nasopharyngealairway5mm , Nasopharyngealairway5mm, 6Mm, 7Mm, 8Mm , Nasopharyngealairway 6Mm , Nasopharyngealairway 7Mm , Nasopharyngealairway 8Mm , N-Butyl-2Cyanoacrylate 0.25Ml / Unit Each Mesh , Nebulization Full Kit ( Adult ) As Per Drugs Act. Specification , Nebulization Full Kit ( Pediatrics ) As Per Drugs Act. Specification , Nebulizinginhalation Cap.Inhaler , Needle Burner & Syringe Destroyer , Needle Knife Sphincterotome , Needle Of Nerve Locator ( Length 100Mm ) . , Needle Of Nerve Locator ( Length 150Mm ) . , Needle Of Nerve Locator ( Length 25Mm ) . , Needle Of Nerve Locator ( Length 50Mm ) . , Nekethamide Amp Inj. , Neomycin + Polyxmycin ( Nevasulf ) 10Gm. Powder , Neomycine1700 Iu5 Gm. Ointment , Neosporin + Dexamethasone 10 Gm. Ointment , Neosporin 10 Gm. Powder , Neosporin 5Gm.Eye Ointment , Neosporin Ear Drop+ Hydrocortisone Ear5ml Eye Drop , Neosporin Ear / Eye Drop 5Ml Eye Drop , Neostigmine 2.5Mg / 5Ml5 Ml Ampoule Injection , Neostigmine ( 0.5Mg / Ml ( 1Ml Amp ) , Injection , Nephazoline 5Ml Eye Drop , Nephrostomy Tube , Nerve Locator Needle ( 5Cm, 10Cm ) 5Cm , 10 Cm , Nicorandil 2Mg / Ml Vial Injection , Nicorandil 5 Mg Tab. , Nicotinamide ( 20 Mg ) + Riboflavin ( 5 Mg ) + Clavulanic Acid ( 125 Mg ) + Phosphate ( 0.6 Mg ) + L-Ornithine L-Aspartate ( 250 Mg ) 60Ml Syp. , Nifedipine- 5Mg Tab. , Nifedipine - 10Mg Tab. , Nifedipine 0.3% W / W + Lidocaine 1.5% W / W In Organogel Basecream , Nimodipine 20Mg / Vial Injection , Nimodipine 60 Mg Tablets , Nitroglycerine Patch 5 Mlointment , Nitrous Regulater With Tubing Set , Niv Mask ( Full Face ) . , Niv Mask ( Medium ) . , Non - Sterile Examination Latex Gloves Long Couf6, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf6.5, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf7, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf7½, Isi Mark . , Non - Sterile Examination Latex Gloves Long Couf8isi Mark . , Non - Sterile Surgical Latex Gloves6, Isi Mark . , Non - Sterile Surgical Latex Gloves6.5, Isi Mark . , Non - Sterile Surgical Latex Gloves7, Isi Mark . , Non - Sterile Surgical Latex Gloves7½, Isi Mark . , Non - Sterile Surgical Latex Gloves8 Isi Mark . , Non Absorbable 3 / 8 Circle, 9.3 Mm Polypropyleneblue 6-0, Round Body, Tungsten-Rhenium’S Needle, Cc Double ( 220 Microns ) Double Needle Monofilament 60 Cm , Non Absorbable 3 / 8 Circle, 9.3 Mm Polypropyleneblue 6-0, Taper Point, Bv-1, Tungsten-Rhenium’S Needle, Double Needle Monofilament 60 Cm , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate Coated With Polyster Braided Greenwith Size 5, 1 / 2 Circle Taper Cutv-55, 55Mm Braided 75 Cm, 4 Suture Per Foil ) , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate Coated With Polyster Braided Green Size 4-0 1 / 2 Circle Taper Cut 2 X V-5Double Needle 17Mm, 90Cm , Non Absorbable Surgical Suture, ( Synthetic ) Monofilament Polypropylene Blue, Prolene Size 2-0 1 / 2 Circle V-7 Tapercut Double Needle 26Mm , Non Absorbable Surgical Suture, ( Synthetic ) Monofilament Polypropylene Blue, Prolene Size 5-0 1 / 2 Circle R.B. ( 320 Microns ) 13Mm, Double Needle, Pledgets 3Mm X 3Mm X 1.5 Mm 60Cm , Non Alcohol, Aqueous Base Hand Sanitizer, Benzethonium Chloride Usp 0.2% 100Ml. Solution , Non Alcohol, Aqueous Base Hand Sanitizer, Benzethonium Chloride Usp 0.2% 500Ml. Solution , Non Compliant, Multilayer Peripheral Balloon With Ultra High Pressure Of 40 Atm. With Choice Of 2 Shaft Lengths Of 75 And 120 Cm. Size- Diameter ( 5Mm To 12Mm ) & Lengths ( 2, 4&6Cm ) . , Non Ionic Contrast Media 300 Mg. 10 Ml.Inj. , Non Ionic Contrast Media 350 Mg. 20 Ml.Inj. , Non Shrinkable Polyurethane Material Iv Line For Long Term Iv Therapy, Should Have Infection Control Device Filled With Isopropyl Alcohol Xro, Siliconized Non Return Valve . , Non-Absorbable Polymer Locking Clips Provide Cool Secure Ligation; Clip Locks Onto The Vessel. Clip Sizes Medium, Medium-Large, Large And Extra-Large. The Non-Absorbable Polymer Clip Is Inert, Nonconductive, Radiolucent, And Does Not Interfere With Ct Or X-Ray Diagnostics. Us Fda Approved , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5001 Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5001t Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5001vs Size : 4-0, 3 / 8 Circle Cutting 16Mm, 90Cms 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5002 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5003 Size : 2-0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5004 Size : 0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5005 Size : 1, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5006 Size : 2, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5011 Size : 1, 1 / 2 Circle Tc 30Mm, 110Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5017 Size : 0, 3 / 8 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5028 Size : 3-0, 3 / 8 Circle R C, 26Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5028t Size : 3-0, 3 / 8 Circle R C, 26Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5029 Size : 6-0, 3 / 8 Circle R B, 13Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036 Size : 2-0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036a Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036at Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5036t Size : 2-0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5037 Size : 0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5037a Size : 0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5037t Size : 0, 3 / 8 Circle R C, 45Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5049 Size : 4-0, 1 / 2 Circle R B, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5052 Size : 2-0, 1 / 2 Circle R C, 50Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5061pcm Size : 4, 1 / 2 Circle Rb 35Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5062 Size : 1, 3 / 8 Circle Cutting, 60Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5063 Size :1, 1 / 2 Circle Rb 40Mm, Heavy, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5070 Size : 3-0, 1 / 2 Circle R B, 25Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5080 Size : 5-0, 3 / 8 Circle R C, 12Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5082 Size : 4-0, 3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5083 Size : 3-0, 1 / 2 Circle R B, 35Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5085 Size ; 3-0, 1 / 2 Circle Rb 25Mm, 90Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5086 Size : 4-0, 1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5087 Size : 3-0, 1 / 2 Circle R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5090 Size : 5-0, Straight R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5096 Size : 5-0, 3 / 8 Circle R B, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5098 Size : 5-0, 1 / 2 Circle T C, 17Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5290 Size : 2-0, Straight Cutting, 60Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5332n Size : 3-0, 1 / 2 Circle Rb 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5333 Size : 2-0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5333t Size : 2-0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5334 Size : 0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5334t Size : 0, 1 / 2 Circle R B, 30Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5335 Size ; 0, 3 / 8 Circle Rb 25Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5610 Size : 2-0, 1 / 2 Circle T C, 17Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P - Black Braided Silk, Sterilised Surgical Sutures5670 Size : 2-0, 1 / 2 Circle T C, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 617 Size : Green 2-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 617A Size : White 2-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 625 Size : Green 3-0, 1 / 2 Circle R B Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 632 Size : Green 3-0, 1 / 2 Circle R B, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 635 Size : Green 4-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 636 Size : Green 3-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 637 Size : Green 2-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 637A Size : White 2-0, 1 / 2 Circle T C Da, 17Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 640 Size : Green 4-0, Sraight Cutting Da, 53Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 643 Size : Green .2, 1 / 2 Circle T C Heavy, 45Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 645 Size : Green 5, 1 / 2 Circle T P Heavy, 55Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 652 Size : Green 3-0, 1 / 2 Circle R B Da, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 669 Size : Green 3-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 672 Size : Green 4-0, 3 / 8 Circle R B, 16Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 677 Size : Green 2-0, 1 / 2 Circle T C Da, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 677A Size : White 2-0, 1 / 2 Circle T C Da, 25Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 679 Size : Green 0, 1 / 2 Circle R C , 50Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 680 Size : Green1, 1 / 2 Circle R C , 50Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 687 Size : Green 2-0, 1 / 2 Circle T C Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 687A Size : White 2-0, 1 / 2 Circle T C Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 687L Size : White2-0, 1 / 2 Circle Taper Cut, Double Arm26mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 690 Size : Green 5-0, 3 / 8 Circle R B Da, 12Mm, 76Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 691 Size : Green 4-0, 3 / 8 Circle R B Da, 12Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 695 Size : Green 4-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Coated Polyester, Sterilised Surgical Suture 696 Size : Green 5-0, 3 / 8 Circle R B Da, 20Mm, 76Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3303 Size : 2-0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3304 Size : 0, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3305 Size : 1, 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3306 Size : 2 , 1 / 2 Circle R C, 38Mm, 75Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3315 Size : 5-0, 3 / 8 Circle Cutting, 16Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3317 Size : 5-0, 3 / 8 Circle R C, 12Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3318 Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3318S Size : 4-0, 3 / 8 Circle Cutting 16Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3321 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3326N Size : 4-0, 3 / 8 Circle Cutting, 10Mm, 38Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328 Size : 3-0, 3 / 8 Circle R C, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328A Size : 3-0, 3 / 8 Circle R C, 26Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328At Size : 3-0, 3 / 8 Circle R C, 26Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3328T Size : 3-0, 3 / 8 Circle R C, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3331 Size : 6-0, 3 / 8 Circle Cutting, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3331 Size : 7-0, 3 / 8 Circle Cutting, 26Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3331 Size : 8-0, 3 / 8 Circle Cutting, 13Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336 Size : 2-0, 3 / 8 Circle R C, 45Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336A Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336At Size : 2-0, 3 / 8 Circle R C, 45Mm, 35Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336Dk Size : 2-0, 3 / 8 Circle R C, 45Mm, 110Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3336T Size : 2-0, 3 / 8 Circle R C, 45Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3338 Size : 1, 1 / 2 Circle R C Heavy, 45Mm, 100Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3338A Size : 1, 1 / 2 Circle R C Heavy, 45Mm, 45Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3340 Size : 0 ( Loop ) , 1 / 2 Circle R B , 40Mm, 150Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3346 Size : 0, 1 / 2 Circle R B Heavy, 40Mm, 100Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3347 Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 100Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3348 Size : 1 ( Loop ) , 1 / 2 Circle R B Heavy , 50Mm, 150Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3388 Size : 3-0, Straight Cutting, 60Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3389 Size : 0, Straight Cutting, 60Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 3390 Size : 2-0, Straight Cutting, 60Mm, 70Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 9038 Size : 8-0, 1 / 2 Circle Cutting, 7Mm, 30Cm 1 Foils , Nonabsorbable Surgical Suture U.S.P, Monofilament Polyamide / Nylon, Sterilised Surgical Sutures 9038 Size : 8-0, 1 / 4 Circle Cutting, 6.5Mm, 30Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 18 Size : 3-0, 3 / 8 Circle Cutting, 22Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2070Lp Size : 7-0, 3 / 8 Circle T P D A, 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2076Lp Size : 7-0, 3 / 8 Circle T P D A, 6Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2078Lp Size : 7-0, 3 / 8 Circle T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2078S Lp Size : 7-0, 3 / 8 Circle T P D A, 8Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2079L Lp Size : 7-0, 3 / 8 Circle T P D A, 9.7Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2079Lp Size : 7-0, 3 / 8 Circle T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2086Lp Size : 8-0, 3 / 8 Circle T P D A, 6Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2087Lp Size : 8-0, 3 / 8 Circle T P D A, 8Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2088L Lp Size : 8-0, 3 / 8 Circle T P D A, 8Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 2088Lp Size : 8-0, 3 / 8 Circle T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 805 Size : 0, 1 / 2 Circle T C, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 806 Size : 2-0, 1 / 2 Circle T C, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 807 Size : 2-0, 1 / 2 Circle T C, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8121B Lp Size : 7-0, 3 / 8 Circle Antiglare T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8204 Pl3 Size : 4-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8204 Size : 4-0, 1 / 2 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8204Vs Size : 4-0, 1 / 2 Circle Rb 13Mm Da, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8205Lp Size : 5-0, 1 / 2 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8207 Pl3 Size : 6-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8207Lp Size : 6-0, 1 / 2 Circle T P D A, 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 822 Size : 3-0, 1 / 2 Circle R B Da, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 823 Size : 6-0, 3 / 8 Circle Slim Blade Cutting, 15Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 825 Size : 3-0, 1 / 2 Circle R B, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 829 Size : 6-0, 3 / 8 Circle R B Da, 13Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 830 Size : 0, 1 / 2 Circle R B ( Heavy ) , 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8304B Lp Size : 7-0, 3 / 8 Circle Antiglare T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8305B Lp Size : 6-0, 3 / 8 Circle Antiglare T Pd. A., 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8307B Lp Size : 6-0, 3 / 8 Circle Antiglare T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8321B Lp Size : 5-0, 3 / 8 Circle Antiglare T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 835 Size : 4-0, 1 / 2 Circle T C Da, 17Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 838 Size : 3-0, 1 / 2 Circle R B, 25Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 840 Size : 1, 1 / 2 Circle R B ( Heavy ) , 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 840A Size : 1, 1 / 2 Circle R B ( Heavy ) , 30Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 841 Size : 2-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 842 Size : 0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 842T Size : 0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 843 Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 843A Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 35Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 843T Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 849 Size : 4-0, 1 / 2 Circle R B, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8521 Size : 4-0, 1 / 2 Circle T P D A, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8522 Size : 3-0, 1 / 2 Circle T P D A, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8526 Size : 2-0, 1 / 2 Circle T P D A, 30Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 853 Size : 4-0, 1 / 2 Circle T C Da, 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8556 Pl3 Size : 5-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 16Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8556Lp Size : 5-0, 1 / 2 Circle T P D A, 16Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8557 Size : 4-0, 1 / 2 Circle T P D A, 16Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 857 Size : 4-0, 1 / 2 Circle Tc 17Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Lp Size : 5-0, 1 / 2 Circle T P D A, 10Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Mlp Size : 5-0, 1 / 2 Circle Tp 10Mm Da, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Slp Size : 5-0, 1 / 2 Circle Tp 10Mm, Da, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8610Spl3 Size : 5-0, 1 / 2 Circle Tp 10Mm, Da, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8611Lp Size : 6-0, 1 / 2 Circle T P D A, 10Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8612Lp Size : 6-0, 3 / 8 Circle R C, 12Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8613Lp Size : 6-0, 1 / 2 Circle T P D A, 13Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8614B Lp Size : 8-0, 3 / 8 Circle Antiglare T P D A, 8Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 867 Size : 4-0, 1 / 2 Circle T C Da, 25Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 870 Size : 4-0, 3 / 8 Circle Cutting, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8702Lp Size : 7-0, 3 / 8 Circle T P D A, 9.7Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8703Lp Size : 8-0, 3 / 8 Circle Rb, Cc Needle 9.3Mm, Da , 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8710 Pl3 Size : 5-0, 1 / 2 Circle T P D A ( Pledget 3Mm X 3Mm X 1.5Mm ) , 13Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8710Lp Size : 5-0, 1 / 2 Circle T P D A, 13Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8710S Lp Size : 5-0, 1 / 2 Circle T P D A, 13Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8725B Lp Size :6-0, 3 / 8 Circle Antiglare Tp 13Mm, Da, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8726Lp Size : 6-0, 3 / 8 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8726M Lp Size : 6-0, 3 / 8 Circle T P D A, 12.3Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8726S Lp Size : 6-0, 3 / 8 Circle T P D A, 13Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8727Lp Size : 6-0, 1 / 2 Circle T P D A, 13Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8731Lp Size : 7-0, 3 / 8 Circle T P D A, 6.5Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8732Lp Size : 8-0, 3 / 8 Circle T P D A, 6.5Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8735Lp Size : 7-0, 3 / 8 Circle T P D A, 7.6Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8741Lp Size : 8-0, 3 / 8 Circle T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 878 Size : 6-0, 3 / 8 Circle R C, 12Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 878Vs Size : 6-0, 3 / 8 Circle Rc, 12Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 879 Size : 4-0, 3 / 8 Circle R C, 12Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 880 Size : 5-0, 3 / 8 Circle R C, 12Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8804L Lp Size : 6-0, 3 / 8 Circle T P D A, 10Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8804Lp Size : 6-0, 3 / 8 Circle T P D A, 10Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8804Vs Lp Size : 6-0, 3 / 8 Circle Rb 10Mm Da, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8805 Lp Size : 6-0, 3 / 8 Circle T P D A, 9Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8805M Lp Size : 6-0, 3 / 8 Circle T P D A, 9.7Mm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8806Lp Size : 6-0, 3 / 8 Circle T P D A, 9Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 880Vs Size : 5-0, 3 / 8 Circle Rc, 12Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 881 Size : 5-0, 3 / 8 Circle R B, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 882 Size : 5-0, 3 / 8 Circle R B Da, 16Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 883 Size : 1, 1 / 2 Circle R C Heavy, 45Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8832 Size : 3-0, 1 / 2 Circle T P, 26Mm, 75Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 883Mb Size : 1, 1 / 2 Circle Rc Heavy, 40Mm, 45Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 887 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 888 Size : 3-0, Straight Cutting, 60Mm, 70Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8935 Pl3 Size : 4-0, 1 / 2 Circle T C ( Pledget 3Mm X 3Mm X 1.5Mm ) , 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8935 Size : 4-0, 1 / 2 Circle T C Da, 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8936 S Size : 3-0, 1 / 2 Circle Tc 17.5Mm Single Arm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8936 Sa Size : 3-0, 1 / 2 Circle Tc 17.5Mm, Single Arm, 60Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8936 Size : 3-0, 1 / 2 Circle T C Da, 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8937 Size : 2-0, 1 / 2 Circle T C Da, 17.5Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 894 Size : 0, 1 / 2 Circle T C Heavy , 30Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 896 Size : 1, 1 / 2 Circle T C Heavy , 30Mm, 100Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8976 Size : 3-0, 1 / 2 Circle T C Da, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8977 Size : 2-0, 1 / 2 Circle T Cda, 26Mm, 90Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 8977L Size : 2-0, 1 / 2 Circle T C Da, 26Mm, 150Cm 1 Foils , Non-Absorbable Surgical Suture U.S.P, Monofilament Polypropylene, Sterilised Surgical Sutures 898 Size : 2-0, 1 / 2 Circle T C Da, 17Mm, 70Cm 1 Foils , Nonabsorbable, Braided, Sterile, Surgical Suture Composed Of Poly ( Ethylene Terephthalate ) . It Is Prepared From Fibers Of High Molecular Weight, Long-Chain, Linear Polyesters Having Recurrent Aromatic Rings As An Integral Component. Size - 5 , Nonabsorbable, Braided, Sterile, Surgical Suture Composed Of Poly ( Ethylene Terephthalate ) . It Is Prepared From Fibers Of High Molecular Weight, Long-Chain, Linear Polyesters Having Recurrent Aromatic Rings As An Integral Component. Size- 2 , Non-Pvcdeph With Micro Needle For Ntg . , Norfloxacin 400 Mg + Lactic Acid 120 Million Spores Tab. , Norfloxacin 400 Mg + Tinidazole 600 Mg + Lactic Acid Bacillus 120 Million Spores Tab. , Norfloxacine Suspension 30Ml ( 30 Ml Bottle ) Syp. , Nylon 2-0 Cutting Body , Nylon 3-0 Cutting Body , O.P.N.C. Ballooncomplete Sizes Sequence , O.P.N.C. Balloon Inflation Device , O2 Regulatore With Tubing Set , Octreotide Lar 30Mg Injection , Oestrogenointment , Ofloxacin 200Mg +Tinidazole 600Mg Tab , Ofloxacin With Dexamethasone0.3 %+0.1%5 Ml. Eye Drop , Ofloxacine + Betamethasone Eye Ointment. 5Gm Ointment , Ofloxacine Eye Ointment.Ointment , Olanzapine 10 Ml Inj. , Olmesartan Medoxomil Bp 20Mg, Amlodipine Besilate Ip, Equivalent To Amlodipine 5Mg, Hydrochlorthiazide Ip 12.5Mg, Colours: Ferric Oxide Usp-Nf ( Yellow ) And Titanium Dioxide Ip Tab. , Olopatadine 0.5% 5Ml Eye Drop , Omega 3 Fatty Acidffs Bottle 50Ml Iv , Omega 3 Fatty Acid Concentration Iv. , Ommaya Reservoir Pediatric Size , Ommaya Reservoiradult Size ( Large ) , Ommaya Reservoirpediatric Size , Onabotulinumtoxina 50Iuinj. , One Action Stent Introduction System , One Vial Each Of Bac2 ( 50-90 Mg / Ml Fibrinogen ) And Thrombin ( 800-1200 Iu / Ml Human Thrombin ) Frozen Solutions ( 1Ml ) , One Vial Each Of Bac2 ( 50-90 Mg / Ml Fibrinogen ) And Thrombin ( 800-1200 Iu / Ml Human Thrombin ) Frozen Solutions ( 2Ml ) , One Vial Of Bac 2 ( 50-90 ) Mg / Ml Fibrinogen ) And Thrombin ( 800-1200Iu / Ml Human Thrombin ) Frozen Solutions , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved.Sizes- A- 8 Inch In Size With Curved For Ml / L / Xl. B- 11 Inch In Size With Right Angle 70° , Open Applicator-Matt Finishing Stainless Steel Applier, With Us Fda Approved. Sizes- 6 And 8 , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Containing An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 10 X10 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 12 X 15 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 15 X 20 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 15 X 25 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 20 X 30 Cm , Open Partially Absorbable Skirted Mesh Device Composed Of A Macroporous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. 25 X 36 Cm , Ophthalmic Irigation Solution 500 Ml.. Solution , Optically Guided Bladeless 12 Mm Trocar With Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal, 100Mm Length. , Optically Guided Bladeless 5 Mm Trocar With Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal, 100Mm Length. , Optional Ivc Filter With One Piece Nitinol Body, Electropolished Conical Shaped Designwith Dual Level Filtration Having Both Caudal And Cranial Migration Resistant With Anchors Benefit With Highly Visible Snare Tip Seamlessly Welded To The Body For Easy Filter Retrieval Even After Long In-Dwell Times. Gives You Both Femoral And Jugular Approaches. Size- Femoral & Juglar , Oral Airways Black , Oral Airways Blue , Oral Airways Blue, Black, White, Green Orange , Yellow, Red , Oral Airways Green , Oral Airways Orange , Oral Airways Red , Oral Airways White , Oral Airways Yellow , Orinidazole Ffs Bottle 100Ml Iv , Oseltamivir H1 N1 Antiviral Cap 40 Mg Tab. , Oseltamivir H1 N1 Antiviral Cap 80 Mg Tab. , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tipflanged, Radiopaque Basket Tips / Soft Tips With 45 Degree Angle Tip , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tipflanged, Radiopaque Basket Tips / Soft Tips With 90 Degree Angle Tip , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tip Flanged, Radiopaque Basket Tips / Soft Tips With 45 Degree Angle Tip , Ostial Perfusion Cannula With Basket Tip And Soft Convex Tip Flanged, Radiopaque Basket Tips / Soft Tips With 90 Degree Angle Tip , Oxcabazepine 300 Tab. , Oxcabazepine 450 Tab. , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 2X 14 Inch ( Approved By Us Fda ) , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 2X 3 Inch ( Approved By Us Fda ) , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 4X 8 Inch ( Approved By Us Fda ) , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat Regular, With Bactericidal - 6X 4 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7 Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size -4X4, . , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7 Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size - 1X2, . , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7Layers ) For Broad Surface Area Coverage. Approved By Us Fda Size 4X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Fibrillar / Layer Form, With Bactericidal Property. Fibril Material ( 7Layers ) For Broad Surface Area Coverage. Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Wovenmaterial, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Approved By Us Fda Size 2X4 Inch , Oxidized Regenerated Cellulose Based Topical Absorbable Hemostat, Structured Non-Woven Material, With Bactericidal Property. Ease-Of-Use In Both Open And Minimally Invasive Procedures. Approved By Us Fda Size 4X4 Inch , Oxidized Regenerated Cellulose, Based Topical Absorbable Hemostat Structured Non-Woven Material With Bactericidal Property. Ease Of Use In Both Open And Minimally Invasive Procedures- 1X 2 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Based Topical Absorbable Hemostat Structured Non-Woven Material With Bactericidal Property. Ease Of Use In Both Open And Minimally Invasive Procedures- 2X 4 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 1X 1 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 1X 3.5 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 3X 4 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal - 6X 9 Inch ( Approved By Us Fda ) . , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property.Size 1X3.5Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property.Size 3X 4Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 1X1 Approved By Us Fda , Oxidized Regenerated Cellulose, Thicker Weave, Can Be Sutured Through, With Bactericidal Property. Size 6X 9Approved By Us Fda , Oxygen Aerosol Mask ( Pediatrics Size ) . , Oxygen Catheter10no. . , Oxygen Catheter2no. . , Oxygen Catheter4no. . , Oxygen Catheter6no. . , Oxygen Catheter8no. . , Oxygen Centar Gas Pipe Line Oxygen Flow Meter Full Set With Ce - Certification ( ??? ?????? ?? ?? ?? ?? ????? ??? ???? ????? ??? ?? ?????? ???? ????? ?? ????? ?????? ???? ?? ?????? ???? ????? ???? ????? ?? ???? ?? ???? ??? ) ???????????? ?? ?????????? ??? ??????? ??????? Point ?? Flow Meter ??? ?? ??? ?? ?? ???? ????? Point ?? Flow Meter ??? ???? ?? ???? ???? ?????? ?? ?????? ???? ???? ???????? , Oxygen Flow Meter With Adjustment Valve Full Set Iso Certifide , Oxygen Mask Adult ( Standard Size ) . , Oxygen Mask Peadiatrics ( Standard Size ) . , Oxygen Mask With Tubing Set All Size , Oxygen Nasal Cannula ( Child ) . , Oxygen Nasal Cannula ( Infant ) . , Oxygen Outlet , Oxygen Regulater With Tubing Set , Oxymetazole Nasal Drops10mleye Drop , Oxymetazoline Nasal Drop 0.25% 10Mleye Drop , Oxymetazoline Nasal Solution Solution , Oxytetracycline Hcl 10 Mg. / Gm5 Gm. Ointment , P.O.P Bandage 4, , P.O.P Bandage 6, , Paediatric - Double Lumen Catheter, 4.5Fr Full Set With Rolleson Syringe. , Paediatric - Triple Lumen Catheter, 5.5 Fr Full Set With Rolleson Syringe. , Paediatric Adjustable Collar For Extrication:- Paediatric One-Piece Immobilisation Device With 12 Precise Setting In One , Collar Suitable To Different Neck Sizes, Dimensions: 56 X 18 X 1.5 Cm, Radio Translucent, Cat Mri Compatible. Iso Certified , Paediatric Arterial Cannulae , For Arch Cannulation.Dlp Pediatric One Piecearterial Cannulae. Vented ¼ Inch Connector With Bluehub, Sizes- 10, 12 , 14, 16 , Paediatric Drip Set. , Paediatric Epidural Setset , Paeditrics Oxygenatorspriming Volume Maximum Should Be Less Than 50Ml.Minimum Operating Volume Approx. 30 Ml • Maximum Blood Flow Rate Should Be 0.2-1.2.Ltrs / Min.• Oxygen Transfer Should Not Be Less • Oxygen Transfer Should Not Be Lessthan 250Ml / Min.• Heat Exchange Efficiency Should Not Be Less Than 0.65.Surface Areaof The Fibers Should Be Approx0.8 To 1.0M2 . • Heat Exchanger Fibre Material Should Be Made Of Polyurethane [ Tpu ] And Surface Area Should Be Approx. 0.22-0.50M2 . Blood Inlet Port 3 / 8 Blood Outlet Port 1 / 4Cardioplegia Port 1 / 4 Gas Inlet Port 1 / 4 Gas Outlet Port 1 / 4Water Port 1 / 2 Maximum Pressure Blood Inlet 1000Mmhg, Water Inlet 42 Psi • Blood Storage Capacity Of Hard Shellreservoir Should Be Max 3000Ml.• Minimum Operative Volume Of Hard Shell Reservoir Should Be 150Ml. , Pancreatic Stent 4 Fr - 7 Cm Length , Pancrunium10 Mg 5 Ml Inj. , Pancuronium 4Mg / 2Ml Ampoule Injection , Pancuronium2 Mg / Ml Inj. , Papain Enzyme Ip _> 481 / Mg Tu Of Activity 5% ( W / W ) + Urea 5% ( W / W ) , Silk Protein Hydrolysate 0.5% Emulsfier Qs 25G. , Papaverine 20Mg / Ml Ampoule Injection , Para Amino Benzoic Acid 100 Mg Biotin 5 Mg Zinc 25 Mg Calcium Pantothrnate 100 Mg Nicinamide 30 Mg Acetyl Cysteine 100 Mgtab1. Tab. , Paracetamolsuppository 160 Mg , Paracetamol 100 Mg / Ml, 150 Ml Drop ( 150 Ml ) , , Paracetamol 75 Mg / Ml ( 10 Ml Inj ) , Injection , Paracetamol Drop 15Ml Eye Drop , Paracetamol Suppositry 125Mg, ( 1X5 Cap ) , Paracetamol Suppositry 250Mg ( 1X5 Cap ) , Paracetamol Syrup / Suspension 125 Mg / 5Ml ( 60Ml Bottle ) Syp. , Paraffin Gauze ( One Box Of 20 Pcs ) Box , Paraffin Liquid ( Liquid Paraffin 1.25Ml + Milk Of Magnesia 3.75Ml + Sodium Picosulphate 3.33Ml ) - Syrup , Parcaine Surface Anesthetic. Solution , Partially Absorbale Intraperitonial Umbilical Hernia Patch With Positioning Pockets, Straps.Pod Sorbaflex Memory Ring, With One Side Light Weight Polypropylene Mesh And A Unique Hydrogel Based Barrier On The Other. Size 6.4 Cm Circle , Partially Absorbale Intraperitonial Umbilical Hernia Patch With Positioning Pockets, Straps.Pod Sorbaflex Memory Ring, With One Side Light Weight Polypropylene Mesh And3a Unique Hydrogel Based Barrier On The Other. Size 4.3 Cm Circle , Patch Buprenorphine ( 20Mcg ) , Consumable , Patient Roller And Transfer Board , Pcn Set, 12Fr, Set Contains Pigtail Type Pcn Catheter With Stellate, Needle, Guide Wire, Dilator, Blade, Urine Bag Connector, Catheter Fixing Disc. , Pcn Set, 14Fr, Set Contains Pigtail Type Pcn Catheter With Stellate, Needle, Guide Wire, Dilator, Blade, Urine Bag Connector, Catheter Fixing Disc. , Pcn Set, 16Fr, Set Contains Pigtail Type Pcn Catheter With Stellate, Needle, Guide Wire, Dilator, Blade, Urine Bag Connector, Catheter Fixing Disc. , Pcnl Alken Metal Dilators With Central Rod , Pcnl Basket , Pcnl Initial Puncture Needle; 18G, 15Cm , Pcnl Initial Puncture Needle;18G, 20Cm , Pcnl Nephrostomy Tube; 20 Fr 40 Cm , Pd ( Peritoneal Dialysis ) Catheter Adult , Pd ( Peritoneal Dialysis ) Catheter Pediatric , Pec Hemostatic Patch For Post Renal Dialysis Size 5Cm X 7Cm , Pec Hemostatic Patch For Post Renal Dialysis Size 5Cm X 7Cmtulle Grass Paraffin Gauze Dressing Sterile Leno Weave With Soft Paraffin Base. Size 15Cm*2Mtr , Pediatricarterial Filter Withbypass Loopthe Arterial Filter Should Be For Pediatric Use. Priming Volume Should Not Be More Than 90Ml Filter Pore Size Should Be 30- 40 Micron. The Outlet And Inlet Blood Posts Should Be 3 / 8 Or ¼. The Filtershould Allow Maximum Blood Flow Rate Of 4.0 To 5.0 L / Min The Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Pediatric Arterial Filter With Bypass Loopthe Arterial Filter Should Be For Pediatric Use, Priming Volume Should Not Be More Than 90Ml, Filter Pore Size Should Be 30- 40 Micron, The Outlet And Inlet Blood Ports Should Be 3 / 8 Or 1 / 4 Inch, The Filtershould Allow Maximum Blood Flow Rate Of 4.0 To 5.0 L / Min, Thefilter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Pediatrics Endotoxin 0.22 Micron, Triple Layer 96 Hour Iv Filter . , Peg Set , Pegylated + L-Asparginase 3750Iu / 5Ml-Pfs Inj. , Penile Clamp , Pentoxifylline Tab. , Pentoxiphylline 20 Mg / Ml Inj. , Per Cuteneous Endscopic Gasrostomy Tube , Percutaneoustransluminalvalvuloplasty Super Thin Coaxially Constructed , Percutaneous Endoscopic Gastrostomy ( Peg ) Tube Full Set , Percutaneous Nephrostomy ( Pcn ) Catheter With Needle All Size , Percutaneous Nephrostomy Kit Containig Guidewire, Dialators-5 Pigtail Catheter Size- 6F, 7F, 8F, 9F, 10F, 12F, 14F, 16F, Length 30Cm. , Percutaneous Pigtail Nephrostomy Catheter Sizes-5F, 6F, 7F, 8F, 9F, 10F, 12F, 14F, 16F, Length 30Cm. , Percutaneous Pigtail Superapubic Catheter Set Containing Pigtail Catheter, S.S. Trocar Needle And Introducer Size- 6F, 7F, 8F, 9F, 10F, 12F, 14F, 16F, Length 22Cm. , Percutaneous Surgical With Minilapsystem- A Manual Instruments For Direct Introduction To Surgical Site Without Need For Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes- A- Alligator Thumb Grip Graspers ( 2.3Mm ) B- Clutch Thumb Grip Graspers ( 2.3Mm ) C- Babcock Thumb Grip Graspers ( 2.3Mm ) D- Bowel Thumb Grip Graspers ( 2.3Mm ) , Percutaneous Surgical With Monopolar System- Direct Introduction To Surgical Site Without Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes-A-Curved Spatulaprobes ( 2.4Mm ) B-Straight Spatulaprobes ( 2.4Mm ) C-Hook Probes ( 2.4Mm ) D-Conical Probes ( 2.4Mm ) , Percutaneous Surgical With Monopolar System- Direct Introduction To Surgical Site Without Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes-A-Curved Spatulaprobes ( 2.4Mm ) B-Straight Spatulaprobes ( 2.4Mm ) C-Hook Probes ( 2.4Mm ) , D-Conical Probes ( 2.4Mm ) , Percutaneous Tracheostomy Tubesize 7 And Size 8 , Perforator Adult Size , Pericardial Sumps Size 20 Frshould Feature A Fluted Tip, Should Be Encased In A Stainless Steel Spring And Should Have Weight At The End. , Pericardial Sumps Size 20 Fr Should Feature A Fluted Tip, Should Be Encased In A Stainless Steel Spring And Should Have Weight At The End. , Perindopril 4Mg Tablets , Perindopril 8Mg Tablets , Peripheral L.V. Catheters . , Peripherally Inserted Central Cathetersize 22X40 , Peripherally Inserted Central Cathetersize 22X60 , Peripherally Inserted Central Cathetersize 22X80 , Peripherally Inseted Central Catheter With Distally Located Valve And Close-Ended 5 French Single-Lumen, 45Cm., 55Cm. . , Peritoneal Dialysis Transfer Set , Peritoneal Fluid -Dianeal 1.5% , Peritoneal Fluid -Dianeal 2.5% , Peritoneal Fluid -Dianeal 4.25% , Peritoneal Fluid -Extraneal 7.5% , Permanent Fixation Device Made Of 316L Stainless Steel Having Cannula Lenth Of 37Cm With Smooth Polyetheretherketone ( Peek ) Cap To Eliminate Exposed Metal Tip And Help Minimize Adhesions To The Fastener And Also With Fastner Level Indicator With Metric Scale To Facilitate Lap Measurments- 30 Fastners , Permanent Pacemaker Dual Chamber+ Leads ( Fda Approved Not Ce Approved ) , Permanent Tunnel Catheter19 Cm & 21 Cm , Permethrine 0.01 Ointment , Permethrine 0.05 Ointment , Pethidine 100 Mg Injection , Pethidine 50 Mginj. , Phenethyl 50 Mg Inj. , Phenibarbitone ( 250Mg / 5Ml ) Injection , Phenobarbitone100mg / Ml 1Ml Amp.Inj. , Phenobarbitone - 30 Mgcap. , Phenobarbitone ( 100Ml ) Syp. , Phenobarbitone . - 200 Mg / Mlinj. , Phenoxybenzamine 1Vial Inj. , Phenoxybenzamine 50 Mg / Ml Ampoule Injection , Phenylepherineophthal. Sol 5Ml Eye Drop , Phenylephrine 10Mg / Mlampoule Injection , Phenylephrine Hcl 10Mg / 1Ml Inj. , Phenytion Sodium Susp. 25Mg / Ml ( 200Ml ) Syp. , Phenytoin Sodium 250 Mg / 5 Ml ( 5Ml Vial ) Inj. , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber. Ophy1010 - 10 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy1215 - 12 Cm X 15 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy1520 - 15 Cm X 20 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy1525 - 15 Cm X 25 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy2030 - 20 Cm X 30 Cm , Physio Mesh Open -Open Partially Absorbable Skirted Mesh Device Composed Of A Macro Porous Mesh, Knitted From Polypropylene And Dyed ( D&C Violet No. 2 ) Polydioxanone Fibers, Laminated To An Absorbable Poliglecaprone 25 Film With The Perimeter Edges Prefolded To Create The Fixation Skirt Having A Pore Size Of 2.4 Mm. Should Also Contain An Orientation Marker Made Of Dyed ( D&C Violet No. 2 ) Polydioxanone Fiber.Ophy2536 - 25 Cm X 37.5 Cm , Picc Silicon Line For Infant. Xro, F-26, L-50Cm, Fr-1.9, With Peelable Canula, Protective Sleeves, Silicon Hub, Fda Approved Trimming Tool. . , Pigtailmarkercatheter5 Fr With 100 Cm , Pigtail Catheter Single Puncture With Dilator Set 14, 16 & 18 Each - 45 Cm Length , Pigtail Cathter ( Angiography ) 5Fr Long And Short , Pigtail Drainage Catheter Set With 10F / 12F Locking Catheterwith Dilator Set, Guide Wire, Connector, 2 Way Stop Cork, Needle, Scalpel In A Tray Pack , Pilocarpin Pfs Vialinj. , Pilocarpine 0.5 % / 1Mlinj. , Pilocarpine Eye Drops 2%5Ml Eye Drop , Pistol Grip Curved Coagulating Shears Ergonomic Handle With Att, Shaft Lengths 45Cm. Can Seal Blood Vessels Upto And Including 7Mm In Diameter, Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle In The Following Shaft Lengths 3 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att.Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter.Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 36 Cm. Can Seal Blood Vessels Upto And Including 7Mm In Diameter With Att.Compatible With Gen 11 , Pistol Grip Curved Coagulating Shears With Ergonomic Handle Shaft Lengths 45 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter.Compatible With Gen 11 , Placentntrex Inj. , Plain Catheter 14, 16, 17, 18, 20 , Plain Disposable Drape Sheet, 120Cm X 150Cm , Plain Sheet Size- 120X210cm ( Sky Blue ) , Plasma Expander Inferon 500Ml Ffs / Bfs Bottle . Solution , Plasma Filter For Plasmapheresis , Plasma Lyte-A- 500 Mla Sterile Non Pyrogenic Isotonic Solution , Plasma Lyte-A- 500 Ml A Sterile Nonpyrogenic Isotonic Solution , Plastar Of Paris ( Per Kg ) Per Kg , Plastic Apron ( Disposible ) . , Plastic Apron ( Reusable ) . , Platinum Coil$ For Aneurysm Embolisation 3D 7Mm X 20Cm Mechanically / Electritally Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 7 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Platinum Coils For Aneufiysm Embolisation 3D Smm X 10Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgl And Usfda Approved , Platinum Coils For Aneurysm Embolisation 30 16Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriale & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 16 Mm X 30 — 40 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgjand Usfda Approved , Platinum Coils For Aneurysm Embolisation 30 4Mm X Jocm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 10 Mm X 30Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 10 Mm X 30 Cm, Compatable With Sr. No.3 & 4. Used For Neurovascular Purpose .Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 10Mm X 20Cm Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 10 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfoa Approved , Platinum Coils For Aneurysm Embolisation 3D 12Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 12 Mm X 30 - 40 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 14Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 14 Mm X 30 - 40 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 18Mm X 30 - 40Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 18 Mm X 30 - 40 Cm, Comparable With Sr. No 3 & 4. Used For Neurovascular Purpose. , Platinum Coils For Aneurysm Embolisation 3D 20Mm X 30 - Socm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 20 Mm X 30 - S0 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 22Mm X Socm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 22 Mm X 50 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 25Mm X Socm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 25 Mm X 50 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 2Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 2Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 6 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 3Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 3Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 30 Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 4Mm X 12Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 12 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 4Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 6 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 6Mm X 10Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 6 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 6Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 6 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 6Mm X 20Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 6 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 7Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 7 Mm X I5 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 9Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropr ( Ate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 9 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D 9Mm X 30Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 9 Mm X 30 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation 3D Smm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 2Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size2 Mm X 2 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 6 Cm, Compatable With Sr. No‘3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 2Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 3Mm X 4Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 4 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 3Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 6 Cm, Compatable With Sr. No 3 & 4.Should Be Dcgi And Usfdaapproved , Platinum Coils For Aneurysm Embolisation Helix 3Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 3 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 4Mm X 10Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 10 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 4Mm X 6Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 4 Mm X 6 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix 4Mm X 8Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System Helical Configuration, For Intra-Cranial Aneurysm ’Embolization, Of Size 4 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Pcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helix Smm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Helical Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 15 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils For Aneurysm Embolisation Helixsmm X 20Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, Heiicaiconfiguration, For Intra-Cranial Aneurysm Embolization, Of Size 5 Mm X 20 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular , Platinum Coils For Aneurysm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 2 Mm X 2 Cm, Compatable With Sr.No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils Foraneurysm Embolisation 3D 4Mm X 8Cm Mechanically / Electrically Detachable Barepaltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra- Cranial Aneurysm Embolization, Of Size 4 Mm X 8 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose. Should Be Dcgi And Usfda Approved , Platinum Coils Foraneurysm Embolisation 3D 8Mm X 15Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 8 Mm X 30 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Platinum Coils Foraneurysm Embolisation 3D 8Mm X 30Cm Mechanically / Electrically Detachable Bare Paltinum Coils With Precise And Instant Detachment, With Appropriate & Novel Progressive Coil Diameter System, 3D Configuration, For Intra-Cranial Aneurysm Embolization, Of Size 8 Mm X 30 Cm, Compatable With Sr. No 3 & 4. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Pledget 3X3mm Firm 10 Starnds , Pledget Oval 3X6mm Firm 10 Starnds , Pledget Oval 3X6mm Firm 10 Starnds , Pledget Square 4.5X6mm Firm 10 Strands , Plegiocard ( 20Ml ) Potassium Solution , Ployglecaprone 25 & Polypropylene Hernia System Mesh Large With Pollyglicaprone 25 Underlay Film , Ployglecaprone 25 & Polypropylene Hernia System Mesh Meduim With Pollyglicaprone 25 Underlay Film , Ployglecaprone 25 & Polypropylene Hernia System Mesh Oval With Pollyglicaprone 25 Underlay Film , Pm O Line { M- F } ---200 Cm , Pm O Line { M- M } --- 200 Cm , Pneumococcal ( Polysaccharide ) Vaccine 13 Valent / 0.5Ml Inj Vaccine , Pneumococcal Conjugate Vaccine 13 ( O.5 Ml Pfs ) Inj. , Policresulen 50 Mg+ Cinchocaine Hydrochloride 10 Mg30 Mg Tube , Poliglactin 910, Size 2-0 With 26Mm, 5 / 8 Circle, Round Body Needle, 90Cm , Poliglactin 910, Size 2-0 With, 30Mm, Fish Hook Needle, 70Cm, Round Body , Poly Propylene Mono Filament Sterile Precut With 1 / 2 Cir Rb Heavy Needle 30Mm Length 70 Cm Non Absorbable ( Surgical Sutures Usp Size 1 ) , Digonstic , Poly Propylene Mono Filament Sterile Precut With 1 / 2 Cir Rb Needle 30 Mm Length 70 Cm Non Absorbable Surgical Sutures Usp Size 2 / 0 ( 12 Foils / Pkt ) , Surgical Material , Polyacrylate Dressing With Carboxymethyl Cellulose Particles And Lipophilic Substance And Ag - Sulphate Salt , Size 6 Cm X6 Cm , Polyacrylate Dressing With Carboxymethyl Cellulose Particles And Lipophilic Substance And Ag - Sulphate Salt, Size 10 Cm X 10 Cm , Polyacrylate Dressing With Carboxymethyl Cellulose Particles And Lipophilic Substance And Ag - Sulphate Salt, Size 15 Cm X 25 Cm , Polyamide Black Monofilament, 1 / 2 Circle Reverse Cutting Heavy , 1 No., 45Mm , 100Cm , Polyamide Black Monofilament, 3 / 8 Circle Reverse Cutting, 2-0, 45Mm , 70Cm , Polyamide Black Monofilament, 3 / 8 Circle Reverse Cutting, 3-0, 26Mm , 70Cm , Polyamide Black Suture 70 Cm, Size 2-0, 45Mm 3 / 8 Circle Reverse Cutting Needle, 1 Foil , Polybutester With Polytribolate Coating* 2-0 90Cm, Blue26mm1 / 2 Circletaper Point , Double Arm , Polybutester With Polytribolate Coating* 4-0 90Cm, Blue17mm1 / 2 Circletaper Point, Double Arm , Polybutester With Polytribolate Coating* 5-0 75Cm, Blue12mm3 / 8 Circletaper Point , Double Arm , Polybutester With Polytribolate Coating* 5-0 90Cm, Blue17mm1 / 2 Circletaper Point , Double Arm , Polybutester With Polytribolate Coating* 6-0 75Cm, Blue9mm3 / 8 Circletaper Point , Double Arm , Polybutester With Polytribolate Coatingl* 3-0 90Cm, Blue26mm1 / 2 Circletaper Point , Double Arm , Polycarbothaneblack Ureteral Indwelling Double J Long Term Stent 5Fr 26Cm With A Pusher And 150 Cm Ptfe Guide Wire. Should Have Shelf Life Of Five Years. Should Be Able To Retain In Body For A Year , Polycarbothaneblack Ureteral Indwelling Double J Long Term Stent 6Fr 16Cm With A Pusher And 150 Cm Ptfe Guide Wire. Should Have Shelf Life Of Five Years. Should Be Able To Retain In Body For A Year . , Polycarbothaneblack Ureteral Indwelling Double J Long Term Stent 6Fr 26Cm With A Pusher And 150 Cm Ptfe Guide Wire. Should Have Shelf Life Of Five Years. Should Be Able To Retain In Body For A Year . , Polydiaxanone1 No.Voilet Monofilament 150 Cm Loop, 1 / 2 Circle Roundbody Ctx Needle 48Mm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Left Inguinal Hernia Large Size 14Cm X 9 Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Left Inguinal Hernia Small Size 12Cm X 8Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia Large Size 14Cm X 9 Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia Small Size 12Cm X 8Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia / Large Size 14Cm X 9 Cm , Polyester Monofilament Pre-Cut Self Fixing Mesh With Absorbable Polylactic Acid Grips For Right Inguinal Hernia / Small Size 12Cm X 8Cm , Polyester Monofilament Self Fixing Mesh With Absorbable Polylactic Acid Grips Size 15Cm X 15Cm , Polyester Monofilament Self Fixing Mesh With Absorbable Polylactic Acid Grips / Size 15Cm X 15Cm , Polyester Multifilament Collagen Ipom 3D Weave Mesh With Prefixed Sutures For Lap Ventral Hernia Surgery 20Cm X 15Cm , Polyglactin 910 Violet Sutre 180 Cm.Size 1, 40 Mm 1 / 2 Circle Round Body Tapercut Doubleneedle, 1 Foil , Polyglactin 910 Withtriclosan Coating1, 1 / 2 Circle Reverse Cutting O.S, 40 Mm, 100Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating1, 1 / 2 Circle Round Body, 40 Mm, 100 Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating1-0, 1 / 2 Circle Reverse Cutting O.S, 40 Mm, 100 Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating3-0, 1 / 2 Circle Round Body, 20 Mm, 75 Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating 1-0, 1 / 2 Circle Round Body, 40 Mm, 100Cm, Usfda Approved , Polyglactin 910 Withtriclosan Coating 2-0, 1 / 2 Circle Round Body, 30 Mm, 100 Cm, Usfda Approved , Polyglycolic Acid Size -1, 130Cm. At One Suture End 50Mm, 1 / 2 Circle Round Body Heavy Needle And Another Needle 80Mm, Straight Round Body Attached At Loop, 80Cm, Away From Free End Of Suture , Polymaide Mono Filament ( Nylon ) With Cd Cut Needle 20 Mm Length 70 Cm Size 2 / 0 ( 12 Foils / Pkt ) , Polymer From Deagraded Gelaltin + Nitrogen + Elecrolytes Ffs Bottle 500 Ml Iv , Polymer Ligation Device With Locking Mechanism, Sterile, Radiolucent Property, Usfda Approved. Cartridges Should Have Self-Adhesive Backing. Sizes- A- Medium Large Polymer Ligation Device. B- Large Ligation Device. C- Extra Large Ligation Device. , Polymer Ligation Device With Locking Mechanism, Sterile, Radiolucent Property, Usfda Approved. Cartridges Should Have Self-Adhesive Backing.A- Medium Large Polymer Ligation Device. B- Large Ligation Device. C- Extra Large Ligation Device. , Polymer Pledget Ptfe Suture Buttress 6 Pledgets Per Packet, 7 Mm X 3 Mm X 1.5 Mm , Polymer Prosthesis For Cbd / Pancreatic Duct 10 / 12Cm . Single Pg Tail With Flaps At Proximal And Distal End. With Side Holes On Curves End And Spiral Holes At Straight End. Size 7 / 8 / 9 / 10 Fr. , Polymide Suture Size 3-O, 70Cm, 26Mm 3 / 8 Circle Rc Needle , Polymixicn + Chloromphenical +Dexamethasone 10 Gm.10 Gm. Ointment , Polypectomy Snare , Polypen Cannula ( Iv Cannula Without Flang ) 20 G , Polypen Cannula ( Iv Cannula Without Flang ) 22 G , Polypen Cannula ( Iv Cannula Without Flang ) 24 G , Polypropylene2-0 90 Cmblue26mm1 / 2Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene3-0 90 Cm, Blue17mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene4-0 75 Cm, Blue17mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene4-0 90 Cm, Blue22mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene5-0 75 Cm, Blue12mm3 / 8 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene5-0 75 Cm, Blue13mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene5-0 75 Cm, Blue17mm1 / 2 Circletaper Poin, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene6-0 75 Cm, Blue11mm3 / 8 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene6-0 75 Cm, Blue13mm1 / 2 Circletaper Point, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene7-0 60 Cm Blue9mm3 / 8 Circletaper Point / Rb, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene7-0 75 Cm Blue10mm3 / 8 Circletaper Point / Rb, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene8-0 60 Cm Blue8mm3 / 8 Circletaper Point / Rb, Double Arm ( Preferably Us Fda Aproved ) , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 10 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 15 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 30 X 30 Partialy Absorabable Mesh , Polypropylene & Polyglactin910 Braided Composite Mesh Usfda Approved 6 X 11 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 10 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 15 X 15 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 30 X 30 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 6 X 11 Partialy Absorabable Mesh , Polypropylene & Polyglecaprone 25 Monofilament Composite Mesh Usfda Approved 7.5 X 15 Partialy Absorabable Mesh , Polypropylene Hernia System Mesh With Onlay, Underlay And Connecter Extended , Polypropylene Hernia System Mesh With Onlay, Underlay And Connecter Large , Polypropylene Hernia System Mesh With Onlay, Underlay And Connecter Medium , Polypropylene, Size 6-0 , Polypropylene, Size 7-0 , Polyurethane Catheter With Introducer For Tpn, One Heparin Stopper, Non Return Valve. Should Have Integral Cap With 70% Isopropyl Alcohol Sterilized, Ce. . , Polyurethane Picc Line For Infant. Xro, F-24, L-15 / 20Cm, Fr-2, With Micro Flash Canula. Fda Approved Trimming Tool. . , Polyurethane Picc Line For Newborn. Xro, Fr-28, L-25Cm, Fr-1 With Splitting Canula And Stylet. Fda Approved Trimming Tool. . , Polyvinyl Alcohol 14Mg In 1Ml, Povidone 6Mg5ml Eye Drop , Porcine Bio Prosthetic Heart Valvemitralshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size - 27Mm, 29Mm , Porcine Bio Prosthetic Heart Valvemitral Should Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size - 27Mm, 29Mm , Porcine Bio Prosthetic Heart Valve Aortic Should Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size-19Mm, 21Mm, 23Mm , Porcine Bio Prosthetic Heart Valve Aorticshould Be Native Stented Porcine Valve, Should Have Anti Calcification Treated. Size-19Mm, 21Mm, 23Mm , Portable Wound Closer System Three Pressure Settings:-75Mmhg, -100Mmhg And -125Mmhg, 7.5X20cm Pu Foam, 3 Layer Drape Canister 200Ml And Silicon Gel Dressing , Post Matum Gloves 6, Isi Mark . , Post Matum Gloves 6.5, Isi Mark . , Post Matum Gloves 7, Isi Mark . , Post Matum Gloves 7½, Isi Mark . , Post Matum Gloves 8 Isi Mark . , Postpartumhemorrhage Balloon Silicon Catheter For Control Of Obstetrical Bleeding Or Management Of Pph. Size- 24Fr, Length- 54Cm, Balloon Capacity-500Ml, . , Potassioum Iodide Calcium Chloride Dihydrate Eye Drops 1 Eye Drop , Potassium Free, Hemodialysis Fluid By Carbo Made ( Part A Part B ) , Povidine Iodine Gargle 1%, 100 Ml Liquid , Povidine Iodine Mouth Wash ( 100Ml ) Solution , Povidone Iodine 1% Eye Drop5ml Eye Drop , Povidone Iodine 7.5% Oitment500gm Ointment , Povidone Iodine Vaginal Pessary200mg. Ointment , Pramipexole 0.5 Tab. , Pramipexole 1.5 Tab. , Prasugrel 10Mg Tablets , Prazosinxl 2.5 Mgtab. , Prazosinxl 5 Mgtab. , Prednisolon Accetate Ophthal 5 Ml 5Ml Eye Drop , Prednisolon Eyrop5ml Eye Drop , Prednisolone 10 Mg Tab. , Premixed Human Insulin Analogue ( R-Dna Origin ) Mixture Of Soluble Insulin Aspart 30% And Protamine Crystallised Insulin Aspart 70% 100 Iu / Ml In 3Mlpfs ( 1 X 3Ml ) Inj. , Premixed Human Insulin Analogue ( R-Dna Origin ) Mixture Of Soluble Insulin Aspart 50% And Protamine Crystallised Insulin Aspart50% 100 Iu / Ml In 3Ml Pfs ( 1X3ml ) Inj. , Prenam 400Gmspowder , Pre-Operative Skin Preparation Solution- Patient Pre-Operative Skin Preparation Solution In One-Step Sterile Applicator Container For Single Use With 2% Chlorhexidine Gluconate ( Chg ) And 70% Isopropyl Alcohol ( Ipa ) With Orange Tint Colour For Easy Visualization, Fda Approved. Size-26 Ml, 10.5 Ml, , Pressure Bag 1000Ml , Pressure Bag 500Ml , Pressure Bags , Pressure Dome , Pressure Garment For Post Burn Deformity Pressure For Various Part Of The Hole Body . , Pressure Monitoring Line= Pm Oline { M- F } 200 Cm , Pressure Monitoring Line= Pm O Line { M- M } 200 Cm , Pressure Tranducer , Pressure Transducer Assembly , Pressure Tubing 200Cm , Primaquin 2.5Mg Tab. , Primaquin 7.5Mg Tab. , Priming Volume Should Not Be More Than 120Ml Filter Pore Size Should Be 30- 40 Micron. The Outlet And Inlet Blood Posts Should Be 3 / 8 Or 3 / 8. The Filter , Prism0cal ( Bicarb 22 ) 5 Litre Bag For Crrt , Prism0cal ( Bicarb 32 ) 5 Litre Bag For Crrt , Prismosol ( Bicarb 22 ) 5 L Bag For Crrt , Prismosol ( Bicarb 32 ) 5 L Bag For Crrt , Procaine Penicillin Powder For0.4Mg Mv / Vial Inj. , Procaine Surface Anesthetic 3Ml Inj. , Procarbazin 50 Mg Cap. , Procedural Kits Henia Kit Size 6Cmx11cm Polypropylene Mesh & 3 Sutures 1 Prolene Mesh, 1 Polyglicapron 25 & 2 Polypropylene Suture , Procedural Kits Henia Kit Size 7.6Cm X15cm Polypropylene Mesh & 3 Sutures 1 Prolene Mesh, 1 Polyglicapron 25 & 2 Polypropylene Suture , Progesteronebp-100Mg Cap , Programmable Vp Shunt One Pack , Prolene Double Ended Round Body 6-0 , Prolene Double Ended Round Body 7-0 , Prolinate Depot Inj. , Promethazine 25 Mg / Ml ( 10 Ml Vail ) Inj. , Promethazine 5Mg / 5Ml ( 100Ml ) Syp. , Promethazine Inj 25 Mg / Ml ( 10 Ml Vail ) , Prone Bolsters , Propylene Glycl Ip 4.96 % W / W Carbomer Ip 0.76% W / W, Colloidal Silver 32 Ppm Triethanolamine Bp 0.32% W / W Purified Water Ip Qs Tube Of 50 Gm1. Solutions , Proseal Lma Size ( 3, 4, 5 ) Size ( 3, 4, 5 ) , Prostegmin Inj. , Protamine 10Mg / Ml-5Ml Ampoule Injection , Protective Disk With Chg Hydrophilic Polyurethane Absorptive Foam With 86.8 Mg Chlorhexidine Gluconate ( Chg ) 1 Disk ( 2.5 Cm ) 7 Mm Center Hole With Radial Slit, , Protein + Vitamins + Minerals + Dha Pwr 200Gm. Powder , Protein + Vitamins + Minerals + Dha Pwr 200Gm. Scrub , Prothrombin Complex Concentrate 1000Iu , Prothrombin Complex Concentrate 1000Iu Inj Injection , Prothrombin Complex Concentrate 500 Iu , Prothrombin Complex Concentrate 500 Iu Inj Injection , Protine Powder 200Gms , Providone Iodine + Metronidazole ( 5 % + 1 % 15 Gm Tube ) , Ointment , Pro-Visc 3D, Composite Dual Side Mesh For Intraperitoneal Placement In Hernia Repair Size - 15X15 Each Mesh , Pro-Visc 3D, Composite Dual Side Mesh For Intraperitoneal Placement In Hernia Repair Size - 30X30 Each Mesh , Pro-Visc 3D, Composite Dual Side Mesh For Intraperitoneal Placement In Hernia Repair Size - 6X11 Each Mesh , Ptfearterial Catheterwith Guide Wireand Introducer Needle Xro. G- 20, Luer Lock. . , Ptfe Coated Cardiac Pacing Wire* 3-0 60Cm -2X12, 17Mm1 / 2 Circletaper Point , Ptfe Coated Cardiac Pacing Wire* 3-0 60Cm, 17Mm1 / 2 Circle Round Body And Straight Cutting Needle With Breakaway Point , Ptfe Feltptfe Felt ( Thick ) ( Nominal Thickness 2.87Mm ) . 4In X 4In, 10.2Cmx10.2Cm ) , Ptfe Feltuniquely Designed To Provide Non Absorbent Tissue Protection , Ptfe Felt Ptfe Felt ( Nominal Thickness 1.65Mm ) . 4In X 4In, 10.2Cmx10.2Cm ) , Ptfe Felt Uniquely Designed To Provide Nonabsorbent Tissue Protection , Ptfe Guide Wire, Straight Tip, 150Cm, 0.035 Diameter , Pu Foam 400 - 600 Microns Pore Size Foam Withtherapeutic Reticulated Accurate Care , Puncture Needle , Puncture Needle 16G, 7Cm Length , Pur Catheter Non Shrinkable Iv Line With Prefilled 70% Isopropyl Alcohol Cap For Peripheral Veins. Xro, And With Non- Return Valve . , Pur Material Xro Needle Prick Freei V Catheter With Metal Introducer. . , Pur Umbilical Venus Catheterwith Xro. Fr-2.5, L-30Cm. Luer Lock, Stopcock. . , Pur Umbilical Venus Catheterwith Xro. Fr-3.5, L-30Cm. Luer Lock, Stopcock. . , Pva Particals300, 500, 700, 1000 Micron , Pvccorrugated Rubber Drain . , Pvc Tubing - 12 Feet , Pyridium, 200Mg Tablets , Pyridoxine 40Mg Tablets , Quadrivalent Human Papillomavirustype 6, 11, 16, 18 Vaccineinj. , Quinine Dihydrochloride - 300Mg / Ml ( 2Ml Amp ) Inj. , Quinine Sulphate - 300Mgtab , Quinine Sulphateip-600Mg Tab. , Rabies Immunoglobines Vialinj. , Radial Introducer Puncture Set4 Fr , Radial Puncture Needle 18G , Radial Puncture Needle 20G , Radial Sheath 5Fx7cm , Radial Sheath 6Fx16cm , Radial Sheath 6Fx7cm , Radial Sheath 7Fx16c , Radial Sheath 7Fx7cm , Radiation Protection Screen6 X 3 , Ramosetron 0.3Mg / 2Ml Vial Inj , Ramosetron 5Mcgcap , Raney Clips / Raney Clips Provides For Hemostasis Of Scalp Flap Edges, Available In Stainless Steel, Plastic Sterile Removable Disposable Clips . , Raneys Clip Pack Of 30 , Ranibizumab 0.3 Mg / Ml Inj. Prefilled Syringe , Ranibizumab 0.5 Mg / Ml Inj. Prefilled Syringe , Ranibizumab 10Mg. / Ml Inj. Prefilled Syringe , Rapid Priming Set Length 35Cm And 40Cm With2 Spike , Rapidure Slab 75 Cm . , Rasigline 0.5Mg Tab. , Rasigline 1Mg Tab. , Rebrithing Beg 0.5 Ltr. , Rebrithing Beg 1 Ltr. . , Rebrithing Beg 1.5 Ltr. , Rebrithing Beg 2 Ltr. , Recombinant Human Growth Hormone 4 Iu / Vial Inj. , Recombinant Human Platelet Derived Growth Factor 100 Mcg Ointment , Reconstitution With The Contents Of The Bacteriostatic Solvent Cartridge Gives A Concentration Of 5.83 Mg Per Ml. , Rectified Spirit ( 90% ) Solution , Regular Human Insulin 40 Iu ( Actrapid ) 10Ml Vial Inj. , Regular Wall Patch Of Ptfe No Pre Clotting, Thickness -0.6Mm Sizes:- 3Cm X 3Cm, , Regular Wall Patch Of Ptfe No Pre Clotting, Thickness -0.6Mmsizes:- 3Cm X 3Cm, , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 5.0 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 5.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 6.0Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 6.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 7.0Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 7.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 8.0 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 8.5 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection 9.0 Mm , Reinforced Cuffed Tube With Preloaded Stainless Steel Stylet, Sterile , To Avoid Infection, Sizes- 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9 Mm. , Reinforced Epidural Wired Polyurethane Catheter Kit With Stainless Steel Needle. Size- Catheter-19G, Needle-17G. . , Reload For Liner Cutter 55 Mmreload For Liner Cutter 55 Blue , Reload For Liner Cutter 55 Mmreload For Liner Cutter 55 Green , Reload For Liner Cutter 75 Mmreload For Liner Cutter75 Green , Reload For Liner Cutter75 Mmreload For Liner Cutter 75 Blue , Remifentanil 1Mg / 1Ml Inj. , Reservoir Adult Size ( Large ) , Reservoir Bag1 Litr , Reservoir Bag2 Litr , Reservoir Bag500 Ml , Reservoir Bag ( 500Ml, 1Litr, 1.5 Litr, 2 Litr ) 500 Ml, 1;Iter, 1.5 Liter, 2 Liter , , Reservoir Bag 1.5 Litr , Respule Salbutamol 5Mg., 2.5Ml , Respules Budesonide Respules 0.25Mg / 2Ml , Retrieval Snare System , Reusable And Washable Antimicrobial Four Layern 99 Mask. Should Have Adjustable Clips To Prevent Air Leking And Fogging On The Eye Wear. , Reusable Linear Cutter-55 Re-Usable Linear Cutter 55 Mm With Capacity Of 200 Firings & Separate Knife - Blade Module. , Rh-Erythropoetin ( 2000 I.U ) , Pfs , Riluzole 100Mginj. , Riluzole 50Mg. Tab. , Rinato Wire 190Cm , Ringer Lactateot Packffs Bottle 45 Ml Iv , Risedronate 35 Mg Tab. , Risedronate 70 Mg Tab. , Risperidone 1Mg Tab. , Risperidone Trihexyphenidyl Hydrochloride Lets 2+2Mg. Tab. , Risperidone Trihexyphenidyl Hydrochloride Lets 3+2Mg. Tab. , Rivastigmine 1.5Mg Tab. , Rivastigmine 2 Mg Cap. , Rivastigmine 3Mg Tab. , Ro Antiscalant Chemical 5 Liter Can For Autoclaves Machine , Robertsuterinecatheter 5F , Rocronium Bromide 100Mg / 10Ml Inj. , Rocronium Bromide 50Mg / 5Ml Inj. , Rocuronium 5Mlvial Injection , Ropinirole 0.2% ( 10Ml ) Inj. , Ropinirole 0.75% ( 20Ml ) Inj. , Ropivacaine 0.75%, 20 Ml Vial Injection , Roprinole 0.25 Tab. , Round Gel Head Rest Large Size , Round Gel Head Rest Small Size , Round Gel With Silicon Head Rest Large Size , Round Gel With Silicon Head Rest Small Size , Roxithromycin Ip-150Mg, Colours+Brilliant Blue Lake + Titanium Dioxide Ip. Tab. , Runthrough Ns Floppy Preformedj , Ryles Tube ( Pvc ) Adultsize 14, 16, 18 . , Ryles Tube ( Pvc ) Size : Adult ( 18, Each ) , Tube , Ryles Tube ( Pvc ) Size : Adult: 16 ( Each ) , Consumable , Ryles Tube ( Pvc ) Size : Children: All Size . , Ryles Tube ( Size 14 Each Piece ) , Consumable , Safe Delivery Kits - O Gauze Swab O Abdominal Sponge ( X-Ray Op. ) O Umblical Cord Clamp O Umblical Cord Ties O Umblical Tabular Band ( Elastic ) O Umblical Scissor O Sutures O Needle Holder O Mucus Extractor With Adopter O Syringe ( 20 Ml ) O Baby Wipe ( 60×60 ) O Baby Diapero Baby Blanket O Baby Garment O Feeding Bottle O Maternity Gown O Maternity Pads Omaternity Mesh Pantyo Surgeon Caps O Surgeon Gown O Surgeon Gloves ( Sterile Surgical Latex Glovesbeaded, 6½, 7, 7½, Each Three Pair Isi Mark ) O Lignocaine Gel O Povidone Iodine Solutions O Plastic Tray O Applicator Stick O Perineal Sheet With Legging O Maternity Drape Sheet O Under Pad With Collecting Bag O Instruction Sheet, O Measuring Tape, O Dimension Detail Sheet, O Pen O Id Band ( Pediatric ) , O Id Band Adult , O Waste Bag , Salbutamol 15Ml ( 5Mg. / Ml ) Solution , Salbutamol 2Mg. ( 5Ml ) Inj. , Salbutamol 5Mg., 2.5Ml Powder , Salbutamol Nebuliser Solution Bp-Sabutamol Sulphate Eq. To Salbutamol 1Mg Per Ml ( 2.5 Ml Amp ) , Ampule , Salbutamol Rota 200 Mcginha. , Salbutamol Rotacap ( 30 Caps ) Rotacap , Salbutamol Syp 2Mg / 5Ml 100 Mlsyp. , Salbutomol Solution For Nebulizer 5Mg / Ml Bott. . Solution , Saline ( Sodium Chloride ) 10Mlnasal Drop , Salisylic Acid 500Gm. Powder , Sartacanazole Nitrate 2% 10Gm. Ointment , Schirmer Tear Test Ophthalmic Strips Per 50 Sterip. Solution , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 17 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att.Compatible With Gen 11 , Scissor Grip Curved Coagulating Shears With Curved, Tapered Tip For Precise Dissection And With 240-Degree Activation Triggers That Support Multiple Hand Positions In The Following Shaft Lengths 9 Cm. Can Seal Blood Vessels Upto And Including 5Mm In Diameter With Att Compatible With Gen 11 , Sclerotherapy Needle , Scoline ( 10 Ml ) Vial ( 50Mg / Ml ) --10 Ml Vial Injection , Securestrap Open 2 Point Fixation Device For Open Hernia Repairs With A Curved Cannula & Strap-Positioning Tip Having A Forward-Tilted Handle & Metric Ruler. It Is A Trigger-Squeeze Mechanical Device With A Curved Cannula, Pre-Loaded With 20 Absorbable Straps Which Are Made Of A Blend Of Polydioxanone Dyed With D&C Violet No. 2 And An L ( - ) -Lactide / Glycolide Copolymer. Inserted Length Of Strap Should Be 6.7 Mm. , Selective Salpingography Catheter , Self Adhering Silicon External Catheter Should Be Built In Band, Clear Coated, Breathable, Odorless, Single . Sterilized, Size:- 6, 8, 10, 12, 14, 16, 18, 20, 22, , Self Expandable Biliary Stent- Electro Polished Self-Expanding Nitinol Stent With Four Tantalum Spoons Of Both Sides Of Stent. All Sizes 6F Sheath Compatible. Multiple Deployment Methods For Controlled And Accurate Deployment, , Self Expanding Nitinol Stent ( 5Mm To 14Mm ) & Lengths ( 2Cm, 4Cm, 6Cm, 8Cm, 10Cm, 12Cm ) With Shaft Length Of 80Cm & 135Cms , Self Expanding Nitinol Stent Encapsulated Between Two Ultrathin Layers Of Eptfe Grafts ( Both Luminal And External Surface Covered By Graft ) . Flared Ends To Ensure Proper Wall Apposition. Carbon Coated Luminal Surface To Reduce Early Stage Platelet Adhesion. Stent Graft Mounted On Multifunctional Tip-Less Braided Catheters With Stent Loc Mechanism. Size- Diameter : 5Mm To 13.5 Mm Lengths: 20Mm, 30Mm, 40Mm, 60Mm, 80 Mm, 100Mm, 120M , Self Expending Usfda Approved For Sfa And Popliteal Nitinol Stent With Unique Triple Helix Design Structure For Multi-Dimensional Flexibility With Unique Delivery System Having Both Thumb Wheel And Pin & Pull Mechanism. Size- Diameter 5Mm -7Mm Length: 40Mm, 60Mm, 80Mm, 100Mm, 120Mm, 150Mm &170Mm With Shaft Length 80 Cm And 135 Cm. , Self Gripping Mesh With Polyester Monofilament Pre-Cut With Absorbable Polylactic Acid Grips For Left Inguinal Hernia / Small Size 12 X 08 Cm, Us Fda Approved , Selodermointment , Senquel Ad Gel Gel , Sequential Compression Device- Should Provide Sequential Gradient And Circumferential Compression Around The Ankle, Calf And Thighcontroller Should Provide The Pressure Of 45 Mmhg At The Ankle Area, 40 Mmhg At The Calf Area & 30 Mmhg At The Thigh Area. , Sequential Compression Sleeves Around The Ankle, Calfand Thigh, • Pressure Range From 45 Mm Hg-130 Hg With Therapeutic Pressure & Highest Pressure For Foot Cuff. • Should Have Different Compression Level At All The Points, • Sleeves Should Have Three Bladders For Giving Optimal Compression And Three Different Chambers With Different Pressure At Each Chamber, • Should Comply All Of This Safety Standard , Should Be Approved By Usfda & Ce , Serenase Nasal Drops 1 Pack , Sertaconazole Nitrate Bp ..20 % W / W Preservative:Benzyl Alcohol Ip 10Gm 0.05 Ointment , Sertraline Hydrochloride 100Mg. Tab. , Sertraline Hydrochloride 25Mg. Tab. , Sevelamer 400 Mg Tablets , Sevelamer 800 Mg Tab. , Shk Catheter1.0, 2.05F , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-10, Cm . , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-12Cm . , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-4, 22Cm . , Short Iv Catheter For Neonates With Straight Guide Wire. G-22, L-6, 22Cm . , Short Pencil Point Spinal Needle G-25, L-38Mm . , Short Ptfe Material Emergency Catheter With Floswitch And Stabilising Device. G-16, L- 130, 160Mm. . , Should Allow Maximum Blood Flow Rate Of 4.0 To 6.0 L / Min The Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. , Sildenafil 25Mg Tablets , Silicon Condom Catheter , Silicon Feeding Tube For Long Term Access. Fr-5. L-125Cm. . , Silicon Feeding Tube For Long Term Access. Fr-6. L-125Cm. , Silicon Feeding Tube For Long Term Access. Fr-9. L-125Cm. , Silicon Nasopharyngeal Airway, With Adjustable Flange And Viden End Sterilized Sizes- 2022, 24, 26, 28, 30, 32, 34, 36, Fr. . , Silicon Ring Mounted Illumination Consumable.For Use With 5-8Mm Open Surgery Medical Devices .40 Gm Assembly With 3Mtr Cable Should Provide Five Hours Illumination, Ce Certified , Silicon Vessel Loop Blue Maxi , Silicon Vessel Loop Red Maxi , Silicone ( 100% ) Catheter Two Way 14 , 16, 18, 20 , Silicone ( 100% ) Catheter Two Way 6 , Silicone ( 100% ) Catheter Two Way 8 . , Silicone Coated , Braided Polyester* 2-0 4Blue & 4White 8X30 / 75Cm Da, Oval Pledget 3X6mm, Firm Pledget, Taper Point, 1 / 2 Circle, 16Mm , Silicone Coated , Braided Polyester* 2-0 4Blue & 4White 8X30 / 75Cm Da, Oval Pledget 4.5X6 Mm, Firm Pledget, Taper Point, 1 / 2 Circle, 25Mm , Silicone Coated , Braided Polyester* 2-0 4Blue & 4White 8X36 / 90Cm Da, Oval Pledget 3X6mm, Firm Pledget, Taper Point, 1 / 2 Circle, 25Mm , Silicone Coated , Braided Polyester* 2-0 Blue 1X30 / 75Cm Da, Oval Pledget 3X6mm, Soft Pledget, Taper Point, 1 / 2 Circle, 25Mm , Silicone Sheet, Size 10 Cm X 10 Cm , Silicone Sheet, Size 6 Cm X 6 Cm , Silk 2-0 Cutting Body , Silk 2-0 Round Body , Silk 3-0 Round Body , Silk Protein And Antimicrobial Silver Dressing Pu Foam 10X10 Cm , Silk Protein And Silver Oxide Based Mesh Wound Dressing 10X25cm , Silk Protein And Silver Oxide Based Mesh Wound Dressing 20X40 Cm , Silk Protein And Silver Oxide Based Wound Dressing 10X25 Cm , Silk Protein Derived Wound Dressing 10X10 , Silk Reel 2-0 X 25Mtr , Silklikecloth , Hypoallergic Surgical Tape 2.5Cm X9.1 Meter , Silver Filling Instrument . , Silver Nitrate 0.2% Glycerol 2% & Purifired Water 25G. , Silver Nitrate Gel 0.2% W / W 20Ggel , Silver Sulphadiazine Cream Usp 1% W / W 25Gm Cream , Sim Catheter 1, 2 , Single Handed Scalpel Blade Removal. , Single Lumen Catheter Full Set With Rolleson Syringe. , Single Lumen -Cvc , Single Lumen Cvc 22G, 10Cm , Single Lumen Cvc 24G, 20 Cm , Single Lumen --Cvc Arrow , Single Stage Straightvenous Cannula Plastic Multi Port Tips , One Piece, Sizes - 10, 12, 14, 16, 18, 20, 22, 24, 28, 30 , Single Stage Straightvenous Cannula Malleableplastic Multi Port Tips And Malleable, One Piece, Sizes - 18, 20, 22, 24, 28, 30 , Single Stage Straightvenous Cannula Malleableplastic Multi Port Tips And Malleable, One Piece, Sizes - 18, 20, 22, 24, 28, 30, 32 Fr , Single Stage Venous Cannulae Straight Plastic Multi Port Tipsone Piece, Sizes - 10, 12, 14, 16, 18, 20, 22, 24, 28, 30, 32Fr , Single Stage Venous Cannulae With Right Angle Metal Tip Beveled Metal , Multi Port Tips Connectionsite 3 / 8 Inch, Sizes-10, 12, 14, 16, 18, 20, 22, 24 , Single Stage Venous Cannulae With Right Angle Metal Tip Beveled Metal , Multi Port Tips Connectionsite 3 / 8 Inch, Sizes-10, 12, 14, 16, 18, 20, 22, 24Fr , Single Use Portable Negative Pressure Wound Therapy System With A Small Portable Sterile Pump Maintaining A Pressure Of 80Mm Of Hg ( Nominal ) + / - 20Mm Of Hg Size 1 , Sion Blue , Skin Marker And Scale Set Of 1 , Sleeve Of Optically Guided 12Mm Bladeless Trocarwith Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal100mm Length. , Sleeve Of Optically Guided 5Mm Bladeless Trocarwith Bilateral Tissue Separators, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal100mm Length. , Sleeves Should Have Three Different Chambers With Different Pressure At Each Chamber, Should Have Passive Cooling Facility In Sleeves For Better Patient Comfort, Should Comply Ingress Protection Ip23 ( Iec 529 ) , Should Comply All Of Safety Standard, , Small Bore Y Extension Set With 2 Lad & Spin Lock Connector. Latex Free With No Metal Components. , Small Size ( 10X7.5X3.2Cm ) Polyurethane Open Cell Reticulated Hydrophobic Dry Foam Dressing With Micro-Bonded Silver. Pore Size 40-50 Ppi. Usfda Approved . , Small Size ( 2.6 X 3.4Mm ) Titanium Clips, Having Lateral And Transverse Grooves On Inner Clip Surface And Distal Clip Closure Providing On Vessel Security , Small Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Small Wide Titanium Metal Ligation Clip. Usfda / Ce Approved. Heart Shaped Wire With Inner Transverse Locking Grooves For Reliable Tip To Tip Closure. Chevron Shape For Better Vessel Engulfing. Should Have Distal End Closure First With Iso 10993-1 Compatibility. , Snare 5, 10, 25Mm , Snp ( Nitroprusside ) 50 Mg / 2Ml Vial Injection , Snugger Setall Sizes: Three Pairs Of Smooth Snuggers With Yellow, Blue &Pinkcolors For Vessel Identification. , Snugger Set All Sizes: Three Pairs Of Smooth Snuggers With Yellow, Blue &Pinkcolors For Vessel Identification. , Soda Lime For Anaesthesia Work Station ( Disposable, Carbon Dioxide Absorbent Medisorb Twin Pack, 4.5 Kg. ( 9.9 Lb ) White To Violet ) Inj. , Sodabicarb 1000 Mg Tablets , Sodabicarb 500 Mg Tablets , Sodalime Absorber Cannister , Sodium Bicarbonate 8.4% W / V25 Ml Ampoule Injection , Sodium Bycarb Glycerine Drops 8% 10Mleye Drop , Sodium Flourosceininjection3ml , Sodium Fusidate 0.02 Ointment , Sodium Hyaluronate For The Treatment Of Degenerative Joints Disease, Pre-Filled Syringe:25Mg / 2.5 Ml Pfs - 2.5 Ml / Pfs Inj. , Sodium Hypochlorite 10 %5 Lit. Solution , Sodium Hypochlorite 5% Solution 5Ltrcan , Sodium Nitroprusside 50 Mginj. , Sodium Pantolate Vials Inj. , Sodium Phosphate Enema B.P. ( Proctolysis Enema ) 18Gm / 100Ml 100Ml-Plastic Enema , Sodium Thiopentone0.5Gm Powder / Vial 20Ml Vialinj. , Sodium Valproate 100Mg. Inj. , Sodium Valproate 200Mg. Inj. , Sodium Valproate Sr-200Mg. Tab. , Sodium Valproate Sr-300Mg. Tab. , Sodium Valproate Sr-500Mg. Tab. , Soft Collar S / M / L , Soft Roll 6 . , Soluble Insulinip, Monocomponent Human Insulin Biosynthetic ( R-Dna Origin ) Each Ml Solution Contains 40 Iu ( 10Ml Vial ) Inj. , Sorafenib 200Mg, Tablet , Sorbiline 200Ml Syp. , Soya Isoflavone 100 Mg + Calcium Citrate 500 Mg + Zinc 15 Mg + Cromium With Vitamins Tab. , Spangestrongel Ointment , Speaking Valves , Specification Forpaeditric Oxygenator Priming Volume Maximum Should Be Less Than 105Ml.Minimum Operating Volume Approx. 30 Ml O Maximum Blood Flow Rate Should Be 2.8.Ltrs / Min. O Oxygen Transfer Should Not Be Less Than 250Ml / Min.O Pressure Drop Should Be Least-Up To 100Mmhg Or Less.O Heat Exchange Efficiency Should Not Be Less Than 0.65. Surface Area Of The Fibers Should Be Approx0.8 To 1.0M2 . O Heat Exchanger Fibre Material Shouldbe Made Of Polyurethane [ Tpu ] And Surface Area Should Be Approx. 0.13M2 To 0.15M2 . Blood Inlet Port 3 / 8 Blood Outlet Port 1 / 4 Cardioplegia Port 1 / 4 Gas Inlet Port 1 / 4 Gas Outlet Port 1 / 4Water Port 1 / 2 Maximum Pressure Blood Inlet 1000Mmhg, Water Inlet 42 Psi O Blood Storage Capacity Of Hard Shell Reservoir Should Be Max 3000Ml.O Minimum Operative Volume Of Hard Shell Reservoir Should Be 100Ml. , Specification Forsmall Adult Oxygenator Recommended Blood Flow Rating 0.5 - 5 L / Min Priming Volume Upto 140 Ml. Effective Gas Exchange Surface Area1.3 M² Effective Heat Exchange Surface Area0.3 M².Material Of Gas Exchange Fiberpolypropylene ( Pp ) Material Of Heat Exchange Fiber Polyurethane ( Tpu ) Max. Volume Capacity4.2 L Maximum Blood Flow Rates:- Venous Filter 7 L / Min- Cardiotomy Filter 5 L / Min- Combined 7 L / Min Minimum Operating Volume:- At Small Adult Blood Flow Rate Of 5 L / Min 150 Ml Cardiotomy Filter Pore Size 40 ?M Venous Filter Pore Size 68 ?Mmaterial Of Defoamerpolyurethane ( Pu ) Material Of Filterpolyester ( Pet ) , Polypropylene ( Pp ] , Specification For Adult Hemoconcentrator The Priming Volume Should Be 70 Ml O Effective Surface Area Of The Fibers Should Be ?1M 2 . O Blood Port Should Be ¼ With Luer Locks O Filtrate Port Should Be ½ ( 1 / 4Adapter ) . O Blood Flow , Specification For Adult Oxygenatorpriming Volume Should Be Less Than 300 Ml, Blood Flow Range Should Be 0 To 6 Liters / Min, Oxygen Transfer Should Be 400Ml / Min, Heat Exchange Efficiency Should Not Be Less Than 0.50, Housing Material Should Be Of Polycarbonate, Effective Gas Exchange Surface Area Of The Fibers Should Be From 1.2 To 2.4M2 , Gas Exchange Fibre Material Shud Be Polypropylene [ P P ] , Heat Exchanger Fibre Should Be Made Ofpolyurethane [ Tpu ] And Surface Area Should Be Approx. 0.2 To 0 .3 M2, Blood Inlet Port ( From Pump ) 3 / 8, Blood Outlet Port 3 / 8 , Cardioplegia Port 1 / 4, Gas Inlet Port1 / 4, Gas Outlet Port 1 / 4 , Water Port 1 / 2, Maximum Pressure Blood Inlet 1000 Mmhg And Water Inlet 42 Psi , Blood Storage Capacity Of Hard Shellreservoir Should Be 4000-5000Ml Minimum Operating Volume Of Reservoir Should Be 200Ml. , Specification For Adult Oxygenator O Priming Volume Should Be Less Than 190 Ml. O Blood Flow Range Should Be 0-6 Lts / Min.O Oxygen Transfer Should Be Atleast 400Ml / Min.O Heat Exchange Efficiency Should Not Be Less Than 0.50.O Housing Material Should Be Of Polycarbonate. O Effective Gas Exchange Surface Area Of The Fibers Should Be From 1.2 To 2.4M2 Gas Exchange Fibre Material Shud Bepolypropylene [ P P ] O Heat Exchanger Fibre Should Be Made Ofolyurethane [ Tpu ] And Surface Area Should Be Approx. 0.2 To 0 .3 M2 Blood Inlet Port ( From Pump ) 3 / 8 Blood Outlet Port 3 / 8 Cardioplegia Port 1 / 4 Gasinlet Port 1 / 4 Gas Outlet Port 1 / 4 Water Ports ½ Maximum Pressure Blood Inlet 1000 Mmhg Water Inlet 42 Psi O Blood Storage Capacity Of Hard Shell Reservoir Should Be Approx. 4000-5000Mlo Minimum Operating Volume Of Reservoir Should Be 200Ml. , Specification For Pedaitric Hemoconcentrator It Should Have Priming Volume Approx 35Ml. O Effective Surfacearea Of The Fibers Should Be Approx 0.5M 2 . O Blood Port Should Be ¼With Luer Locks. O Filtrate Port Should Be ½. Omaximum Trans-Membrane Pressure Should Be 500Mm Hg. O It Should Have Tubing Lines Along With Reservoir Bag.Should Be ¼With Luer Locks. O Filtrate Port Should Be ½. Opressure Should Not Be More Than 500Mm Hg. O It Should Have Tubing With Reservoir Bag. , Specification For Small Adult Oxygenatorrecommended Blood Flow Rating 0.5 To 5 L / Min, Priming Volume 175 Ml Effective Gas Exchange Surface Area 1.3 M² , Effective Heat Exchange Surface Area 0.3 M², Material Of Gas Exchange Fibershould Bepolypropylene ( Pp ) , Material Of Heat Exchange Fiber Should Be Polyurethane ( Tpu ) , Maximum Volume Capacity 4.2 Litres Maximum Blood Flow Rates:- Venous Filter- 7 L / Min, Cardiotomy Filter- 5L / Min, Minimum Operating Volume:150 Ml, Cardiotomy Filter Pore Size 40 ?M, Venous Filter Pore Size 68 ?M, Material Of Defoamer Should Be Polyurethane ( Pu ) , Material Of Filter Should Be Polyester ( Pet ) / Polypropylene ( Pp ] , Material Of Housing Should Be Polycarbonate ( Pc ) , Specifications For Cardioplegia Heat Exchanger ( Bcd ) It Should Have Priming Volume Less Than 50 Ml, Blood Flow Rate Should Be Between 0 To 600 Ml / Min, Filter Pore Should Be Around 100 Um, Inlet Connection Should Be 1 / 4 , Outlet Connection Should Be 3 / 16. Heat Exchange Surface Area Should Be ?.20M 2, Heat Exchange Should Be Of Stainless Steelcorrugated / Convoluted Pipes. Bubble Trap Should Be Integrated For Highly Efficient Debubbling, Exchangeable Water In / Water Out Blood Flow Path Bottom Up It Should Have A Stopcockprime / Perfusion For Easypriming. It Should Have Tip In The Surgeon Pack So That It Can Beconnected To Cardioplegia Cannula. It Should Be Available Both In 4:1 And 1:4 Configurations. , Spercutaneous Surgical With Minilapsystem- A Manual Instruments For Direct Introduction To Surgical Site Without Need For Trocar, Fabricated Stainless Steel Alloy Used Percutaneously. Sizes- A- Alligator Thumb Grip Graspers ( 2.3Mm ) B- Clutch Thumb Grip Graspers ( 2.3Mm ) C- Babcock Thumb Grip Graspers ( 2.3Mm ) D- Bowel Thumb Grip Graspers ( 2.3Mm ) , Spinal Needle.Ce Certified22 No. L-12Cm . , Spinal Needle.Ce Certified22 No. L-15Cm . , Spinal Needle.Ce Certified23 No. With Introducer And Metal Stylet . , Spinal Needle.Ce Certified26 No. . , Spinal Needle.Ce Certified27 No. L-120Mm . , Spinal Needle.Ce Certified28 No. . , Spinal Needle.Ce Certified29 No., L-120Mm. . , Spinal Needle. Ce Certified18 No. . , Spinal Needle. Ce Certified20 No. . , Spinal Needle. Ce Certified21 No. . , Spinal Needle. Ce Certified24 No. . , Spinal Needle. Iso, Ce Certified16 No. . , Spirally Coiled Pe Pmo Line All Sizes 150, 200, 300, 400 Cm , Spirally Coiled Pvc Pmo Line All Sizes 150, 200, 300, 400 Cm , Spironolactone ( 50 Mg ) + Torsemide ( 10 Mg ) Tab. , Srings 2Ml Leur Lock , Stainless Steel Dual Cuffed For Ventilation During Co2 And Ktp Laser Surgery Of The Laryngeal / Tracheal Area , Stand For Lead Aprons; S.S. Made With Wheels, With Minimum 6 Hangers , Steal Core Guide Wire0.035 Inch , Steam Inhaler , Steel Wire 1 X 45 Cm, 3 X 45 Cm, 6, 48Mm 1 / 2 Circle Cutting 1 / 2 Circle Blunt Point , Steel Wire 4 X 45 Cm, 2, 40Mm 1 / 2 Circle Blunt Point , Steel Wire 4 X 45 Cm, 4, 40Mm 1 / 2 Circle Blunt Point , Steel Wire 4 X 45 Cm, 5, 44Mm 1 / 2 Circle Blunt Point , Stent Delivery Microcathetermicrocatheter : Compatible With Flow Diverter Delivery, Id 0.027 , Stent Neurovascular Self Expandable Nitinol Fully Deplorable Partly Or Completely Retrievable With Radiopaque Markers 4.S Mm X14 - 16Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.S Mm X 14 — 16 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Should Be Dcgi Andusfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 19 - 20Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 3.5 Mm X 19 - 20 Mm, Fully Deployable, Partlyor Completely Retrievabie, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.. Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 19 - 20Mmneurovascular Selfexpandablenitinolstentused For Stent Assisted Coiling, Of Size 3.5 Mm X 19 – 20 Mm, Fully Deployable, Partly Orcompletely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.. Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 24 - 25Mm Neurovascu |Ar Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 3.5 Mm X 24 - 2S Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter. Should Be Dcgl And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 3.5Mm X 24 - 25Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 3.5 Mm X 24 - 25 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter. Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X 34 - 38Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 34 — 38 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Shouldbe Dcgi And Usfdaapproved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X 34 - 38Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 34 – 38 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X14 - 16Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 14 – 16 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X22 - 24Mm Neurovascular Self Expandable Nitinolstent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 22 —24 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Shouldbe Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X22 - 24Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 22 – 24 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Radiopaque Markers 4.5 Mm X28 - 30Mmneurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 28 – 30 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, To Be Provided With Delivery Microcatheter.Should Be Dcgi And Usfda Approved , Stent Neurovascular Self Expandable Nitinol Fully Deployable Partly Or Completely Retrievable With Raoiopaque Markers 4.5 Mm X28 - 30Mm Neurovascular Self Expandable Nitinol Stent Used For Stent Assisted Coiling, Of Size 4.5 Mm X 28 — 30 Mm, Fully Deployable, Partly Or Completely Retrievable, Radiopaque Markers At Both Ends, Should Be Compatable With Item No 52 Or To Be Provided With Delivery Microcatheter.Shouldbe Dcgi And Usfda Approved , Stent Retriever Device Tigertriver , Stent Self Expandable Nitinol Carotid Straight / Tapered 10Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X40 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 10Mm X 7Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X 7 Mm X 30 Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11- 15. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 10Mm X 7Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X 7 Mm X 40 Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stentj With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11— 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm H 30 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11— 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm X 40 Rum, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr. No 11 - 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 6Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm X 6 Mm X 30 Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid‘ Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11- 15. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotid Straight / Tapered 8Mm X 6Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 8 Mm X 6 Mm X 40Mm, Tapered, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11 Is. Used For Neurovascular Purpose.Shouldbe Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotio Straight / Tapered 6Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 6 Mm X 30 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfoa Approved , Stent Self Expandable Nitinol Carotio Straight / Tapered 6Mm X 40Mm Self Expandable, Nitinol, Endovascular Stents Of Size 6 Mm X 40 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Stent Self Expandable Nitinol Carotio Straight / Tapereo 10Mm X 30Mm Self Expandable, Nitinol, Endovascular Stents Of Size 10 Mm X 30 Mm, Straight, With Delivery Devices For Use In Carotid ( Extracranial Use ) & Dural Sinuses ( Rapid Exchange Self- Expandable Nitinol Stent ) With Mr Compatibility Distal And Proximal Radiopaque Markers, Should Be Compatable With Item In Sr.No 11. Used For Neurovascular Purpose.Should Be Dcgi And Usfda Approved , Sterilant Cold Disinfectant For Dialysis Containing Peracetic , Sterilant Hot Disinfectant For Dialysis Containing21% , Sterile Absorbable Geltatin Sponge ( Porcine Origine ) , Size 80 X 50 X 10 Mm , Sterile Adhesive Post Op Dressing Large, Silver Impregnated Antibacterial Pu Hydrophilicfoam Dressing Size Should Be 05Cm X 25 Cm And Transparent Adhesive Pu Drape Size 10Cmx30cm , Sterile Adhesive Post Op Dressing Small, Silver Impregnated Antibacterial Pu Hydrophilic Foam Dressing Size Should Be 05Cm X 10 Cm And Transparent Adhesive Pu Drape Size 10Cmx15cm , Sterile Collagen Sheet In Dry Form, Size 10 Cm X 20 Cm , Sterile Collagen Sheet In Dry Form, Size 15 Cm X 30 Cm , Sterile Collagen Sheet In Dry Form, Size 20 Cm X 40 Cm , Sterile Collagen Sponge 10X10cm . , Sterile Collagen Sponge 5X5cm . , Sterile Disposable Large Dressing Pack Tray With Galipot, Cotton Balls, Disposable Dressing Forceps, Dressing Pad, Gauze Swabs, Gloves, Sterile Field, Hand Wipe Tissue, Bandage Roll And Disposal Bag , Sterile Disposable Medium Dressing Pack Tray With Galipot, Gauze Swabs, Dressingpad, Dressing Forceps, Cotton Balls, Hand Wipe Tissue, Disposal Bag And Gloves , Sterile Drum / Container20 Litre , Sterile Gauze Swabs 10X10cm 12 Ply With X-Ray Thread Pack Of 10 , Sterile Haemocoagulase Solution10mleye Drop , Sterile Medicated Collagen Particles10ml ( Approved By Dcgi ) . , Sterile Medicated Collagen Particles, 10 Ml , Sterile Medicated Collagen Sheet In Dry Form 10X10 . , Sterile Medicated Collagen Sheet In Dry Form 15X30 . , Sterile Native Collagen Sheets In Wet Formsize 10X10 . , Sterile Native Collagen Sheets In Wet Formsize 10X25 . , Sterile Native Collagen Sheets In Wet Formsize 15X30 . , Sterile Native Collagen Sheets In Wet Formsize 20X40 . , Sterile Powder Free Surgical Gloves Size - 6 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 6.5 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 7 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 7.5 ( Pair ) , Sterile Powder Free Surgical Gloves Size - 8 ( Pair ) , Sterilized Polypropylene Mesh 10 Cm X 15 Cm , Sterilized Polypropylene Mesh 15 Cm X 15 Cm , Sterilized Polypropylene Mesh 30 Cm X 30 Cm , Sterilized Polypropylene Mesh 6 Cm X 11 Cm , Sterilized Polypropylene Mesh 7.6 Cm X 15 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 15 Cm X 15 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 35.6 Cm X 30 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 6.4 Cm X 11.4 Cm , Sterilized Soft Polypropylene Mesh With Flue Stripe Usfda Approved 7.6 Cm X 15 Cm , Sterlie Surgical Latex Gloves Beaded6, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 6.5, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 7, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 7½, Isi Mark . , Sterlie Surgical Latex Gloves Beaded 8 Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 6, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 6.5, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 7, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 7½, Isi Mark . , Sterlie Surgical Latex Gloves Non Beaded 8 Isi Mark . , Sternal Closure Implant Made Of Biocompatible Peek ( Polyetheretherketone ) Polymer With Consistent Tension Across Sternotomy Or Fracture Of The Sternum ( Pack Of 5 Bands ) , Stoma Bag Barrier Paste 60 Ml , Stone Basket : Flat Wire ( Stainless Steel ) , Stone Basket : Helical ( Stainless Steel ) , Stone Basket : Nitnol , Stone Basket Flexible , Straight Taper Point Surgical Suture Needles Size: 43Mm , Straight Taper Point Surgical Suture Needles Size: 64Mm , Streptomycin 0.75 Mginj. , Styllet -Adultsize , Styllet -Paediatricsize , Submicronic Eptfe, Anterior Side Is Monofilament Polypropylene Mesh, ( Bard Soft Mesh - Average Pore Size Of 2500-3000 Microns ) , Posterior Side Is 100% Submicronic Eptfe ( Sub Micronic Pore Structure < 1 Micron ) , Overlap Sub Micronic Eptfe Edges Protects The Edge Of Mesh From Visceral Attachment. Various Sizes , Sucral Fate 200 Ml Solution , Suctioncatheter ( Fr ) 10F , Suctioncatheter ( Fr ) 11F , Suctioncatheter ( Fr ) 12F, , Suctioncatheter ( Fr ) 14F, , Suctioncatheter ( Fr ) 16F , Suctioncatheter ( Fr ) 18F , Suctioncatheter ( Fr ) 6F, , Suctioncatheter ( Fr ) 8F , Suction Catheter ( Fr ) 6Fr , Suction Catheter ( Fr ) 8Fr , Sugamadex Vial 5Ml / 500Mg Injection , Sulfacetamide Eye Drops 20%10Mleye Drop , Sulfamethoxazole 100 Mg And Trimethoprim 20Mg Tab. , Sulfamethoxazole 400Mg And Trimethoprim 80Mginj. , Sulfamethoxazole 800Mg And Trimethoprim 160Mginj. , Sumag20g. Ointment , Sumag75g. Ointment , Sumag Oint. Spray , Sumitriptan 25Mg. Tab. , Suprapubic Catheter Set 16 Fr , Surface Disinfectant - 10 Minute Aldehyde Free Disinfectant Containing Potassium Mono Per Sulphate Powder 5Kg Packet , Surfacent5ml / Bovine With Natural Lavageinj. , Surfacent 2Ml / Bovine With Natural Lavageinj. , Surfacent 3Ml / Bovine With Natural Lavageinj. , Surgical Blade Size 11Pkt ( 100Pcs ) , Surgical Blade Size 15 Pkt ( 100Pcs ) . , Surgical Blade Size 22 Pkt ( 100Pcs ) , Surgical Blade Size 23 Pkt ( 100Pcs ) . , Surgical Blade Size 24 Pkt ( 100Pcs ) . , Surgical Blade Size 26 Pkt ( 100Pcs ) , Surgical Clipper- Cutting Height Should Be 0.21 Mm. Should Be Only Ixp-7 Waterproof-Rated Rechargebleclippers Fully- Ubmersible For Thorough Cleaning And Disinfection. Should Have Adeptar Usable In Wet Or / And Dry Clipping. 40 Degree Angled For Seamless Grip. Size- Neuro Clipper , Sensi Clipper , Surgical Cover Dressings Stich Bonded Hydrofiber Dresssings With 1.2% W / W Impregnated Ionic Silver With Sustained And On Demand Broad Spectrum Antimicrobial & Bactricidal Efficacy With High Exudate Management Capability And Self Adherent Waterproof Moist Wound Dressing Made Up Of Triple Hydrocolloid Elastomeric Polymer Matrixsize 9X10cm, 9X15cm, 9X25cm, 9X30 Cm, 9X35cm , Surgical Cover Dressings With Ionic Silver Stich Bonded Hydrofiber Dresssings With 1.2% W / W Impregnated Ionic Silver With Sustained On Demand Broad Spectrum Antimicrobial & Bactricidal Activity With High Exudate Management Capabilities Of Locking In Exudatesin Gelformand Self Adherent Waterpro Of Moistwound Dressing Made Upof Triple Hydrocolloidelastomeric Polymer Matrix Size 9X10cm, 9X15cm, 9X20 Cm, 9X25 Cm, 9X30cm, 9X35 Cm , Surgical Hand Wash, Didecyl Dimethyl Ammonium Chloride 1Gm., 1- Propanol 40Gm. Ph 6. 500Ml. Solution , Surgical Mini Drop 10X10 . , Surgical Pattie / Cottonoid Compressed Rayon Provides The Natural Softness, Absorbency And Pliability Of Cotton. Should Haverayon Fibers To Resist Shedding, Stretching Or Linting. X- Ray Detectable. Available In Sizes 3 X 3 ( 7.62Cm X 7.62Cm ) . , Surgical Pattie / Cottonoid Compressed Rayon Provides The Natural Softness, Absorbency And Pliability Of Cotton. Should Haverayon Fibers To Resist Shedding, Stretching Or Linting. X- Ray Detectable. Available In Sizes 1 X 1 ( 2.54Cm X 2.54Cm ) . , Surgical Skin Marker Pen With Scale , Surgical Sprit500ml Bottle , Surgical / Biopsy Gun- Jamshidi Bone Marrow Biopsy / Aspiration Needle Should Have Light Weight Handle With Bult-In Comfort Knob. Should Have Bevel Tip For Easy Coring Of Bone. Should Have Bevel Cannula Tip. Should Have Tapered Distal Cannula For Easy Recovery Of Sample. Should Be Us Fda Approved.8G*4, 11G*4, 11G*6, 13G*2, 13G*3.5 , Surgical / Drainge Catheter Kit- 15.5 Fr Silicone Catheter Witch Is Soft Flexible And Conforms To The Pleural Or Peritoneal Site Discomfort Comes With Polyester Cuff. Catheter Kit , Surgikit Drape Kit Contents: 3 X Surgeons Gowns ( Large ) , 6 X Hand Towels, 1 X Surgeons Cap, 2 X Nurses Hats, 1 X Patient Cap, 1 X Aperture Drape ( 160X210 Cm ) , 3 X Surface Drapes- Adhesive ( 60X80cm ) , 1 X Tegaderm Site Dressing, 3 X Hose Covers, 1 X Instrument Tray, 1 X Plast One Case Contains 6 Kits , Sustained Release Recombinant Human Growth Hormone 24Mg / Vial Inj. , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 0 2X75cm Black Braided Silk , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 0 2X76cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 1 2X35cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 1 2X75cm Black Braided Silk , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 1 2X76cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 2 / 0 2X75cm Black Braided Silk , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 2 / 0 2X76cm Polyamide Monofilament , Sutupak Pre Cut Sterile Non Absorbable Sutures Size 3 / 0 2X75cm Black Braided Silk , Sutupak, 3-0, 3 X 45Cm , Sutupak; 1, 3 X 45Cm , Sutupak; 2-0, 3 X 45Cm , Suture 0 - Mersilksuture--- Cutting Needle , Suture 2-0 Silk Suture -- Cutting Needle , Suture Dyed Polyester Poly ( P-Dioxanone ) , 1, 36X36 Cm, 1 / 2 Circle Cutting 40Mm, 20 Anchors / Inch Biderctional Usfda Approved , Suture Free Securement Hydrocolloid Device For Picc Line Catheter . , Suture Free Securement Hydrocolloid Device For Umbilical Catheter . , Suture Needles Curved & 1 / 2 Circle Cutting All Size1 X 6 Needle , Swan Ganz Catheter , Switch Arterial Cannula --Bd 20 G , Synthetic Absorable Coated Poliglecaprone 25 With Irgacare Mp, 3 / 8 Circle Reverse Cutting Ps-1 Needle, 24Mm, 70Cm , Synthetic Absorable Coated Polyglactin 910 Usp Size 10 / 0 6.5Mm, 3 / 8 Circle Cs140-6 ( 150 Micron ) , 10Cms , Synthetic Absorable Coated Polyglactin 910 Usp Size 6 / 0 8Mm, 1 / 4 Micro Point Spatulated Da, 45Cms , Synthetic Absorable Coated Polyglactin 910 Usp Size 8 / 0 6Mm, 3 / 8 Micro Point Spatulated Da, 30Cms , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 0 90Cm Violet 40Mm 1 / 2 Circle Taper Point / Round Body ( Preferably Us Fda Aproved ) , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 1 90Cm Violet 40Mm 1 / 2 Circle Taper Point / Round Body ( Preferably Us Fda Aproved ) , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 2-0 75Cm Violet 26-30Mm 1 / 2 Circle Taper Point / Taper Cut ( Preferably Us Fda Aproved ) , Synthetic Absorbable Coated Braided Suture ( Glycolide / Lactide Copolymer ) 3-0 70-75Cm Violet 20-22Mm 1 / 2 Circle Taper Point / Round Body ( Preferably Us Fda Aproved ) , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2228 Size : 2, 1 / 2 Circle R B, 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2228Vs Size : 2, 1 / 2 Circle R B, 45Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2303 Size : 5-0, 1 / 2 Circle R B, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2304 Size : 4-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2304Vs Size : 4-0, 1 / 2 Circle Rb 20Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2305 Size : 4-0, 1 / 2 Circle R B, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2306 Size : 4-0, 3 / 8 Circle Cutting 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2317 Size : 2-0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2317Da Size : 2-0, 1 / 2 Circle R B & 1 / 2 Circle T C Da, 30Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2317T Size : 2-0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2319 Size : 1, 1 / 2 Circle T C , Ob Needle, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2338 Size : 0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2341 Size : 2-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2342 Size : 0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2343 Size : 1, 1 / 2 Circle R B Heavy, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2344 Size : 0, 1 / 2 Circle R B Heavy, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2345 Size : 2-0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346 Size : 0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346A Size : 0, 1 / 2 Circle R B, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Aa Size : 0, 1 / 2 Circle R B, 40Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Da Size : 0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Da / 180 Size : 0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Dat Size : 0, 1 / 2 Circle R B & 1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346T Size : 0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Vs Size : 0, 1 / 2 Circle R B, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2346Vst Size : 0, 1 / 2 Circle R B, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347 Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347A Size : 1, 1 / 2 Circle R Bheavy, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Aa Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da Size : 1, 1 / 2 Circle R B Heavy 1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 160 Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 160Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180 Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180N Size : 1, 1 / 2 Circle Rb Heavy 50Mm, Da, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180Rb Size : 1, 1 / 2 Circle Rb 40Mm, Da, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Da / 180T Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Dat Size : 1, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Dat-N Size : 1, 1 / 2 Circle Taper Cutting 40Mm, Da, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347T Size : 1, 1 / 2 Circle R B.Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Vs Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2347Vst Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2350 Size : 1, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2359 Size : 1, 1 / 2 Circle R Bheavy, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2361 Size : 0, 1 / 2 Circle T C Heavy, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2362 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2363 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2364 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2364Vs Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2382 Size : 2-0, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2382A Size : 2-0, 1 / 2 Circle Rc 40Mm, 45Cms 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2401 Size : 3-0, 3 / 8 Circle Cutting, 22Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2407 Size : 3-0, 3 / 8 Circle R C ( Undyed ) , 26Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421 Size : 1, 1 / 2 Circle R C Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421A Size : 1, 1 / 2 Circle Rc 40Mm, Or Needle, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421Da-Or Size : 1, 1 / 2 Circle R B & 1 / 2 Circle R C Or Needle, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2421T Size : 1, 1 / 2 Circle Rc 40Mm, Or Needle, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2422 Size : 0, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2437 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2437Dasize : 3-0, 3 / 8 Circle Rb 22Mm, Da, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2438 Size : 1, 1 / 2 Circle R C Heavy, 50Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2442 Size : 5-0, 3 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2448 Size : 1, 1 / 2 Circle R B Heavy, 50Mm, 100Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2465 Size : 4-0, 5 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2471 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2472 Size : 3-0, 1 / 2 Circle Cutting, 22Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2473 Size : 2-0, 5 / 8 Circle R B, 27Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2473Ldl Size : 2-0, 5 / 8 Circle Rb 27Mm, 100Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2478 Size : 2, 1 / 2 Circle Rc 40Mm, Or Needle, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2493 Size : 5-0, 3 / 8 Circle R C , 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2494 Size : 4-0, 3 / 8 Circle R C , 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2495 Size : 3-0, 3 / 8 Circle R C , 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511 Size : 2-0, 1 / 2 Circle T C, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511A Size : 2-0, 1 / 2 Circle T C, 30Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511Aa Size : 2-0, 1 / 2 Circle T C, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2511A-N Size : 2-0, 3 / 8 Circle Rc 45Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2512 Size : 0, 1 / 2 Circle T C, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2512A Size : 0, 1 / 2 Circle T C, 30Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2513 Size : 1, 1 / 2 Circle T C, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2513A Size : 1, 1 / 2 Circle T C, 30Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2513Aa Size : 1, 1 / 2 Circle T C, 30Mm, 20Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2515 Size : 3-0, 1 / 2 Circle T C, 17Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2516 Size : 3-0, 1 / 2 Circle T C, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2517 Size : 2-0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2517N Size : 2-0, 3 / 8 Circle Rc 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518 Size : 0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518N Size : 0, 1 / 2 Circle Tc 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518T Size : 0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518Vs Size : 0, 1 / 2 Circle T C, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2518Vst Size : 0, 1 / 2 Circle T C, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2534 Size : 0, 1 / 2 Circle R C Or Needle, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2546 Size : 0, 1 / 2 Circle R B, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2825A Size : 0, 1 / 2 Circle R C, 23Mm, 35Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2826 Size : 1, 1 / 2 Circle R C, 23Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2826A Size : 1, 1 / 2 Circle R C, 23Mm, 35Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 2944 Size : 4-0, 3 / 8 Circle R C, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 945 Size : 2-0, 1 / 2 Circle R B Undyed, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture U.S.P. , Braided And Coated Polyglycolic Acid, Sterilised Surgical Sutures 946 Size : 0, 1 / 2 Circle R B Undyed, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9132 Size : 3-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9133 Size : 2-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9201H Size : 5-0, 1 / 2 Circle R B ( Da ) , 13Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9210 Size : 1-0, 1 / 2 Circle R B, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9221 Size : 1, 1 / 2 Circle Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9233 Size : 1-0, 1 / 2 Circle R B, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9234 Size : 1, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9235Sa Size : 1, 1 / 2 Circle T C, 30Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9237 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9248 Size : 1, 1 / 2 Circle R B, 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9261 Size : 1-0, 1 / 2 Circle R B ( Heavy ) , 50Mm, 150Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9262 Size : 1 Loop, 1 / 2 Circle R B ( Heavy ) , 50Mm, 150Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9304 Size : 4-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9352 Size : 1, 1 / 2 Circle R B ( Heavy ) , 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suture, Monofilament Polydioxanone ( Violet ) , Sterilised Surgical Sutures 9371 Size : 1-0, 1 / 2 Circle R B ( Heavy ) , 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2160da / 160 Size : 1, 1 / 2 Circle Taper Cut Da , 3 / 8 Circle Rb , 40, 50Mm, 160Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2304 Size : 4-0, 1 / 2 Circle Rb , 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2304sp Size : 4-0, Straight Tp, 19Mm, 75Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2317 Size : 2-0, 1 / 2 Circle R B, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2317da Size : 2-0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 30Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2317t Size : 2-0, 1 / 2 Circle Rb, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2338 Size : 0, 1 / 2 Circle Rb, 30Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2340 Size : 3-0, 1 / 2 Circle Rb, 30Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2345 Size : 2-0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346 Size : 0, 1 / 2 Circle R B, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346da Size : 0, 1 / 2 Circle R B &1 / 2 Circle T C Da, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346t Size : 0, 1 / 2 Circle Rb, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2346vs Size : 0, 1 / 2 Circle R B, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347 Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da Size : 1, 1 / 2 Circle Rb Da, 1 / 2 Circle T C, 40Mm, 140Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180 Size : 1, 1 / 2 Circle Rb Da, 1 / 2 Circle T C, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180N Size : 1, 1 / 2 Circle Rb Da, 1 / 2 Circle T C, 50, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180-Nn Size : 1, 1 / 2 Circle Rb Heavy, 1 / 2 Circle Tc Heavy Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347da / 180T Size : 1, 1 / 2 Circle Rb & 1 / 2 Circle Tc Da, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347n Size : 1, 1 / 2 Circle Rb Heavy, 40Mm, 115Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347t Size : 1, 1 / 2 Circle Rb Heavy, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347vs Size : 1, 1 / 2 Circle R B Heavy, 40Mm, 110Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2347vss Size : 1, 1 / 2 Circle Rb Heavy, 40Mm, 125Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2350 Size : 1, 1 / 2 Circle Rb, 36Mm, 120Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2360 Size : 1, 1 / 2 Circle Rb, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2363 Size : 1, 1 / 2 Circle T C Heavy, 40Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2382 Size : 2-0, 1 / 2 Circle R C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2401 Size : 3-0, 3 / 8 Circle Cutting, 22Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2404 Size : 2-0, 3 / 8 Circle Cutting, 26Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2421 Size : 1, 1 / 2 Circle R C Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2421t Size: 1, 1 / 2 Circle Rc Or Needle, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2437 Size : 3-0, 1 / 2 Circle R B, 20Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2437a Size : 3-0, 1 / 2 Circle Rb, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2438 Size : 1, 1 / 2 Circle Rc , 45Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2438 Size : 1, 1 / 2 Circle Rc Heavy, 50Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2448 Size : 1, 1 / 2 Circle R B, 50Mm, 100Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2471 Size : 3-0, 3 / 8 Circle Cutting, 16Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2472 Size : 3-0, 1 / 2 Circle Cutting ( Undyed ) , 22Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2473n Size : 2-0, 5 / 8 Circle Rb, 27Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2494 Size : 4-0, 3 / 8 Circle Rc, 12Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2516 Size : 3-0, 1 / 2 Circle T C , 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2517ob Size : 0, 1 / 2 Circle Tc, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2518 Size : 0, 1 / 2 Circle T C, 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2518da / 180 Size : 0, 1 / 2 Circle Tc, 40Mm, 180Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2519 Size : 1, 1 / 2 Circle T C , 40Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2534 Size : 0, 1 / 2 Circle R C Or Needle, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2825 Size : 0, 1 / 2 Circle Rc, 23Mm, 45Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2826 Size : 1, 1 / 2 Circle Rc, 23Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2826a Size : 1, 1 / 2 Circle Rc, 23Mm, 35Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures2944 Size : 4-0, 3 / 8 Circle Rc, 16Mm, 70Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures945 Size : 2-0, 1 / 2 Circle Rb, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures946 Size : 0, 1 / 2 Circle Rb ( Undyed ) , 36Mm, 90Cm 1 Foils , Synthetic Absorbable Surgical Suturesu.S.P, Coated Polyglactin 910, Sterilised Surgical Sutures947 Size : 1, 1 / 2 Circle Tp Undyed, 36Mm, 90Cm 1 Foils , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size - 0, 30Mm, 1 / 2 Circle Round Body, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 30Mm, 1 / 2 Circle Round Body, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 36.4Mm, 1 / 2 Circle Taper Point Ct, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 40Mm, 1 / 2 Circle Taper Cut, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 0 40Mm, 1 / 2 Circle Taper Point, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 36Mm, 1 / 2 Circle Rc, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 40Mm, 1 / 2 Circle Heavy Round Body, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 40Mm, 1 / 2 Circle Heavy Round Body, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size- 0, 40Mm, 1 / 2 Circle Taper Cut, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb , 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Heavy Rb , 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Rc, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Rc, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Taper Point, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 1 40Mm, 1 / 2 Circle Taper Point, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size -1, 23Mm, 1 / 2 Circle Heavy Rc, 35Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 40Mm, 1 / 2 Circle Rc, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 40Mm, 1 / 2 Circle Rc, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb , 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 30Mm, 1 / 2 Circle Rb , 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 36.4Mm, 1 / 2 Circle Taper Point Ct, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 36.4Mm, 1 / 2 Circle Taper Point Ct, 90Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Rb, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Rb, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Taper Point, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 2 / 0 40Mm, 1 / 2 Circle Taper Point, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Round Body, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 20Mm, 1 / 2 Circle Round Body, 70Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Prime Cutting Ps-1, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Prime Cutting Ps-1, 70Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Rc Ps-1, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 24Mm, 3 / 8 Circle Rc Ps-1, 70Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 25Mm, 3 / 8 Circle Primecutting, 100Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 25Mm, 3 / 8 Circle Primecutting, 90Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 36Mm, 1 / 2 Circle Taper Cut, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 3 / 0 36Mm, 1 / 2 Circle Taper Cut, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 4 / 0 20Mm, 1 / 2 Circle Rb, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size 4 / 0 20Mm, 1 / 2 Circle Rb, 70Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-0, 36.4Mm, 1 / 2 Circle Taper Point Ct, 90Cms Undyed , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-0, 36Mm, 1 / 2 Circle Rc, 100Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-0, 40Mm, 1 / 2 Circle Taper Point, 90Cms , Synthetic Absorbable Triclosan Coated Polyglactin 910 Antibacterial Suture Usp Size-1, 36.4Mm, 1 / 2 Circle Taper Point Ct, 90Cms Undyed , Synthetic Casting ( Fiberglass Casting ) 3 . , Synthetic Casting ( Fiberglass Casting ) 4 . , Synthetic Casting ( Fiberglass Casting ) 5 . , Synthetic Fast Absorbable Surgical Suture U.S.P.2516Rb Fast Size : 3-0, 1 / 2 Circle Rb, 35Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2718 F Size: 4-0, 3 / 8 Circle Rc Cirkum, 16Mm, 45Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2718Rb F Size: 4-0, 3 / 8 Circle Rb Cirkum, 16Mm, 45Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2732 Fast Size : 3-0, 3 / 8 Circle Rc, 26Mm, 75Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2760 Fast Size : 2-0, 3 / 8 Circle Rc, 26Mm, 75Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2761 Fast Size : 2-0, 1 / 2 Circle Rb, 38Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762 Fast Size : 2-0, 1 / 2 Circle T C , 35Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762 Fs Size : 2-0, 1 / 2 Circle Tc Epicio, 35Mm, 100Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762Dy F Size : 2-0, 1 / 2 Circle Cutting Da, 30Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2762F Vs Size : 2-0, 1 / 2 Circle Rb , 35Mm, 110Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2763 Fast Size : 0, 1 / 2 Circle Tc, 35Mm, 90Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2763 Fs Size : 0, 1 / 2 Circle Tc, 35Mm, 100Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2777 Fast Size: 2-0, 1 / 2 Circle Rc & 1 / 2 Circle Rb Da, 36Mm, 140Cm 1 Foils , Synthetic Fast Absorbable Surgical Suture U.S.P.2739 Fast Size : 3-0, 1 / 2 Circle Rb, 30Mm, 70Cm 1 Foils , Synthetic Nonabsorbable Surgical Suturewith Controlled Linear Elongation Process & Plastic Knot Deformitypolypropylene 3-0, 26Mm, 1 / 2 Circle Round Body Taper Point Sh, Ethalloy, Double Needle, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity Polypropylene 3-0, 17Mm, 1 / 2 Circle Round Body Rb-1, Double Needle, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 4-0, 17Mm, 1 / 2 Circle Round Body Rb-1, Blue Monofilament Double Needle, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 4-0, 26Mm, 1 / 2 Circle Taper Point Sh, Ethalloy, Double Needle Blue Monofilament, 90Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 6-0 , Tungsten-Rhenium’S Needle, 13Mm , 3 / 8 Circle, Tp, C-1 Double Needle, ( Blue 60Cm ) , , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 4-0, 13Mm, 1 / 2 Circle Round Body Cc-4 Hemo-Seal Multipass, Double Needle, 75Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 5-0, 13 Mm, 3 / 8 Circle Cc -1 ( 320 Microns ) , Double Needle, 75Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 5-0, 9.3Mm, 3 / 8 Circle Cc Hemo-Seal Multipass, Double Needle, 60Cm , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 6-0, 3 / 8 Circle Round Body, Visi-Black C-1, Ethalloy Needle, 13.0 Mm, Double Needle ( 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 7-0 , Tungsten-Rhenium’S Needle 9.3Mm, 3 / 8 Circle, Bv 175-8 Cc Tp, Double Needle ( Blue 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 7-0, 3 / 8 Circle Round Body, Visi-Black Bv-1, Ethalloy, 9.3 Mm, Double Needle ( 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 7-0, Tungsten-Rhenium’S Needle, 8.0Mm, 3 / 8 Circle Tp, Bv, 175-6, Double Needle ( Blue 60 Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 8-0, 3 / 8 Circle Visi-Black Cc-175-6, 8.0 Mm, Double Needle ( 60Cm ) , Synthetic Nonabsorbable Surgical Suture With Controlled Linear Elongation Process & Plastic Knot Deformity, Polypropylene 8-0, Tungsten-Rhenium’S Needle, 8.0 Mm, 3 / 8 Circle Tp, Bv, 175-6 Double Needle ( Blue 60Cm ) , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 4 No., ½ Circle Cutting Ccs, 48Mm, Length 4X45cm , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 5 No., ½ Circle Round Body Blunt Point, 44Mm, Length 75Cm , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 6 No., ½ Circle Round Body Blunt Point, 44Mm, Length 75Cm , Synthetic Nonabsorbable Surgical Suture, Nonabsorbable Polybutylate Coated, Polyester 5, No. 1 / 2 Circle Tapercut V-55, 55Mm, Green Braided, 75Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 17Mm, 1 / 2 Circle Taper Cut 2X V-5 Double Needle Green Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 17Mm, 1 / 2 Circle Taper Cut V-5 Double Needle White Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 26Mm, 1 / 2 Circle Taper Cut 2X V-7 Double Needle White Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, , Monofilament Stainless Steel 316L Grade, 1 No., 1 / 2 Circle Taper Cut V-37, 40Mm, 4X 45Cm , Synthetic Nonabsorbable Surgical Suture, , Monofilament Stainless Steel 316L Grade, 7 No., 1 / 2 Circle Cutting Ccs, 48Mm, 4X 45Cm , Synthetic Nonabsorbable Surgical Suture, , Monofilament Stainless Steel 316L Grade, 6 No., 1 / 2 Circle 3- Needles Round Body 1 Conventional Cutting ( Ccs ) Blunt Point, 48Mm, Length 45Cm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 17Mm , 2-0, Green Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 17Mm , 2-0, White Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 26Mm , 2-0, Green Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 1 / 2 Circle Tapercut Double Needle 26Mm , 2-0, White Braided 90 Cm Polymer Pledgets 6Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 2-0, 26Mm, 1 / 2 Circle Tapercut V-5 Double Needle, 75 Cm Multistrand 5 Green & 5 White Strands In A Foil Ptfe Polymer Pledget 3Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 2-0, 17Mm, 1 / 2 Circle Tapercut V-5 Double Needle, 75 Cm Multistrand 5 Green & 5 White Strands In A Foil Ptfe Polymer Pledget 3Mm X 3Mm X 1.5Mm , Synthetic Nonabsorbable Surgical Suture, , Polybutylate Coated Braided Polyester, 44.8 Mm Green 1 / 2 Circle Tapercut V-39 , 26Mm , 2 No., 75 Cm , Synthetic Nonabsorbable Surgical Suture, Monofilament Stainless Steel 316L Grade, Ethisteel, 2 No., ½ Circle Round Body Blunt Point, 40Mm, Length 45Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated Braided Polyester, 2-0 26Mm, 1 / 2 Circle Taper Cut 2X V-7 Double Needle Green Braided Sutures, 90Cm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated, Braided Polyester, 2-0 , 17Mm, 1 / 2 Circle Taper Cut Sx Double Needle, 5-Green, 5-White Sutures, 75Cm With Pledgets ( 6X3x1.5 ) Mm , Synthetic Nonabsorbable Surgical Suture, Polybutylate Coated, Braided Polyester, 2-0 , 26Mm, 1 / 2 Circle Tapercut Sx Double Needle, 5-Green, 5-White Sutures, 75Cm With Pledgets ( 6X3x1.5 ) Mm , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Irgacare Mp Coated, Undyed 1, 1 / 2 Circle Round Body Taper Point Ct-1 36Mm, 90Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Irgacare Mp Coated, Undyed 2-0, 1 / 2 Circle Round Body Taper Point Ct-1 36Mm, 90Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Irgacare Mp Coated, Undyed 3-0, 3 / 8 Circle Cutting Ps1 Prime, Multi Pass Ethalloy, 24Mm, 70Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polyglactin910 With Triclosan Coated, Undyed 1-0, 1 / 2 Circle Round Body Taper Point Ct-1 36Mm, 90Cm Undyed , Synthetic Nonabsorbable Surgical Suture, Polypropylene 5-0, 17 Mm, 3 / 8 Circle Round Body Sh Double Needle , 90Cm , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2732 Fast Size : 3-0, 3 / 8 Circle R C , 26Mm, 75Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2732 / 70 Size : 3-0, 3 / 8 Circle R C , 26Mm, 70Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2732A Fast Size : 3-0, 3 / 8 Circle R C , 26Mm, 45Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2735A Fast Size : 3-0, 1 / 2 Circle Cutting , 22Mm, 45Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2762 Fast Size : 2-0, 1 / 2 Circle T C , 35Mm, 90Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2762A Eco Size : 2-0, 1 / 2 Circle T C , 35Mm, 70Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2762F Vs Size : 2-0, 1 / 2 Circle T C, 35Mm, 110Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2763 Fast Size : 0, 1 / 2 Circle T C , 35Mm, 90Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2763A Eco Size : 0, 1 / 2 Circle T C , 35Mm, 70Cm 1 Foils , Synthetic Polyglactin 910 Fast Absorbable Surgical Suture U.S.P.2777 Fast Size : 2-0, 1 / 2 Circle R B &1 / 2 Circle Rcda, 36Mm, 140Cm 1 Foils , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 0 35Mm, 3 / 8 Circle Rc, 60Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 0 36.4Mm, 1 / 2 Circle Tc, 90Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 2 / 0 35Mm, 1 / 2 Circle Tc, 90Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 2 / 0 36Mm, 1 / 2 Circle Rc & 1 / 2 Circle Rb, 140Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 2 / 0 36Mm, 3 / 8 Circle Rc, 60Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 16Mm, 3 / 8 Circle Cutting, 45Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 16Mm, 3 / 8 Circle Prime Cutting Pc-3, 75Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 22Mm, 1 / 2 Circle Cutting, 70Cms , Synthetic Rapide Absorbable Coated Polyglactin 910 Suture Undyed Usp Size 3 / 0 26Mm, 3 / 8 Circle Rc, 75Cms , Syringe 1Ml For Inflatin And Deflation Occulaion Balloon System Cadence Precision Injector Syringe 1Mi. For Inflation & Deflation Of Occlusion Balioon System. Should Be Compatable With Item Of Sr. No 46 -50.Should Be Dcgi And Usfda Approved , Syringe 1Ml For Inflatin And Deflation Occulaion Balloon Systemcadence Precision Injector Syringe 1Ml. For Inflation & Deflation Of Occlusion Balloon System. Should Be Dcgi And Usfdaapproved , Syringes With Luer Lock 10Ml , Syringes With Luer Lock 20Ml , Syringes With Luer Lock 50Ml , Syringes With Luer Lock 5Ml, , Syringes Without Luer Lock 10Ml With 21 G Needle , Syringes Without Luer Lock 2 Ml With 24 G Needle , Syringes Without Luer Lock 5Mlwith 21 G Needle , T- Piece With Oxygen Tubing . , Tab. Dabigatran Etexilate ( 110Mg ) , Tab. Dabigatran Etexilate ( 150Mg ) , Tab. Rivaroxaban ( 10Mg ) , Tab. Rivaroxaban ( 20Mg ) , Tacrolimus 0.0003 Ointment , Tamsulosin ( 0.4Mg ) + Dutasteride ( 0.5Mg ) Tab. , Tamsulosin ( 0.4Mg ) + Finasteride ( 5Mg ) Tab. , Tannic Acid ( With Glycerine ) Gum Paint 20% 15 Ml Vial. Solution , Taxes Micro Guide Catheter , Taxes Microguide Wire , Taylor Brace ( Regular ) S / M / L , Technology, Third Generation Npwt System Pu Foam Size 15 X26 X3.3Cm And Absorbent Cotton Gauze Swabs, Transparent Pu Drape, Disposable Scalpel And Gloves , Technology, Third Generation Npwt System, Pu Foam Size 12.5 X18 X3.3Cm And Absorbent Cotton Gauze Swabs, Transparent Pu Drape, Disposable Scalpel And Gloves , Teflon Pledgets 1 / 4, 1 / 8, 1 / 6 , Teflon Wire J Tip .025X150 & 260Cm , Tegaderm ( 8.5X10.5Cm ) , Tegaderm ( 8.5X10.5Cm ) Pack Of 50 , Telmisartan 20 Mg + Amlodipine 2.5 Mg + Hydrochlorothiazide ( Hctz ) 6.25 Mg Tab. , Temporary Pacemaker Dual Chamber , Temporary Pacing Wire 60Mm, Electrode Blu 60Cm, 17Mm 1 / 2 Circle Tapercut & 60Mm Straight , Temporary Pacing Wire 90Mm, Electrode Blu 60Cm, 26Mm 1 / 2 Circle Tapercut & 60Mm Straight , Tenceteplace 50Mg.Inj. , Tenecteplase 30Mg. Inj. , Tenecteplase 40Mg. Inj. , Tension Free Viganal Tape 1.1Cm X 8Cm Soft Polypropylene Mesh , Tension Free Viganal Tape 10Cm Wide X 45Cm Length With 2 Helical Passer For Inside Out , Tension Free Viganal Tape Medurethral Approach, Sling Of 1.1Cm X 8Cm Soft Polypropylene , Terbinafine 200Mg. Tab. , Terbinafine Hydrochloride 0.01 Ointment , Terbutaline Sulphate 2.5Mg Tab. , Teriparatide 250 Mcg / Ml 3Ml Vail Inj. , Terrumo Progreat Microcatheter 0.024 Inch , Terumo Guide Wire 0. 035 X 150 Cm J , Terumo Guide Wire 0. 035 X 260 Cm J , Terumo Guide Wire 0. 035 X 260 Cmst Tip , Testosterone Undecanoate 40 Mg Cap. , Tetanous Immuglobulin Human 1000Iu Inj. , Tetanus Immunoglobulin Usp 250 Iu / Vial Inj. , Tetanus Immunoglobulin Usp 500 Iu / Vialinj. , Tetanus Toxide0.5Ml Ampouleinj. , Tetra Starch 6%Ffs Bottle 500 Ml Iv , Tetrabenazine 25Mg. Tab. , Tetracycline 250Mg. Cap. , Thalidomide Cap. , The Codman Scalp Clip Applier Is A Sterile, Single-Use System Designed To Apply Scalp Clips To The Scalp Flap. Comes With Pre-Loaded Scalp Clips, Permits Rapid Application Of Scalp Clips, Provides Adequate Hemostasis. . , The Deviseshould Be Classified With Respect To Electrical Shock, Fire And Mechanical Hazards In Accordance With: Ul60601-1, Es60601-1:2005 And Standards Classified With Can / Csa C22.2No.60601-1:08 , Theophyline 25.3 Mg 3 Ml Inj. , Therapy System With Pressure Setting 05Cmx25cm Pu Foam, 45Ml Canister, 3 Layer Drape And Silicon Dressing , Thermosensitive Endotracheal Tube - The Usfda Approved Endotracheal Tube Made Of Ruschelit™ Pvc Technology With Right Degree Of Stiffness I.E. Thermosensitive, Flexibility, And Kink Resistance. Comply With Astm Standard Requirements And Are Marked Withf29 Notation. Tubes Feature An Outstanding I.D. To O.D. Ratio. Available In A Full Range Of Paediatric And Adult Sizes Starting From 2.5Mm In Cuffed & 2Mm In Uncuffed. No Latex Contents. , Thiocolchicoside 4 Mg+Aceclofenac 100 Mg Tab. , Thiocolchicoside 8 Mg+Aceclofenac 100 Mg Tab. , Thiopentonesodium ( 500 Gm ) -- Vial Injection , Thoracic Cathetermade Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Size - 24 , Thoracic Cathetermade Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Sizes -28, 32 , Thoracic Catheter Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Size - 24 , Thoracic Catheter Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracicdrainage. Sizes -28, 32 , Thoracic Catheterright Angle ( 90° ) Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Sizes: 24, 28, 32 , Thoracic Catheterright Angle ( 90° ) Made Of Dehp Free- Medical Grade Polymer, Suitable For Thoracic Drainage. Sizes: 24, 28, 32 , Thoracic Drinage Sets , Three Way Stop Cock . , Threeway Stop Cockwith Leur Lock , Thrombophob Ointment , Thrombus Cutter Catheter , Thymoblobulin Rabbit 25 Gm , Thymocyte Globulin Inj. , Thyroxine Sodium 0.25 Mg Tab , Tianeptine Sodium 12.5 Mg Tab. , Ticagrelor 60Mg. Tab. , Ticagrelor 90Mgtablets , Timolol Moleate - 5Ml 0.25% Eye Drop , Tinidazole300 Mg Tab. , Tinidazole500mg Tab. , Tinidazole Powder For Susp 150Mg / 5Mlsyp. , Tirfiban 5 Mg / 100 Ml Inj. , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 10X15 Oval , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 15X15 Square , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 15X20 Oval , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 20X25 Oval , Tissue Seprating Multilayed Mesh Of Polydioxanone, Soft Prolene & Orc Usfda Approved 7.5X15 Rectangle , Tissue Stabilizer For Beating Heartshould Be A Low Profile Tissuestabilizer With Auto Spreadfeature Of Pods. , Tissue Stabilizer For Beating Heart Should Be A Low Profile Tissuestabilizer With Auto Spreadfeature Of Pods. , Titanium Clip Applier For Large Size Titanium Clip ( 6.2X12.5Mm ) , 26.7 Cm Long For Open Surgery , Titanium Clip Applier For Medium Size Titanium Clip ( 3.2X5.2Mm ) , 19.0 Cm Long For Open Surgery , Titanium Clip Applier For Medium / Large Size Titanium Clip ( 5.5X8.8Mm ) , 26.7Cm Long For Open Surgery , Titanium Clip Applier For Small Size Titanium Clip ( 2.6X3.4Mm ) , 19.0Cm Long For Open Surgery , Titanium Liga Clips Set Of 10 , Titanium Ligating Clip For Laparoscopy , Titanium Ligating Clip For Laparoscopy Large , Titanium Ligating Clip For Laparoscopy Medium , Titanium Ligating Clip For Laparoscopy Small , Titanized Polypropylene Mesh ( Size - 10X15 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 10X15 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 10X15 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X15 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X15 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X15 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X20 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X20 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 15X20 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 30X30 ) ( 24G / M2 ) 3Mm, 20N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 30X30 ) ( 35G / M2 ) 1Mm, 40N / Cm ) Each Mesh , Titanized Polypropylene Mesh ( Size - 30X30 ) ( 65G / M2 ) 1Mm, 55N / Cm ) Each Mesh , Tmt Graph Paper A4 Size, 100 Piece / Pkt. , Tmt Paper Uniem Concept Aprop. . , Tmt Stickers . , Tobramycine60 Mginj. , Tobramycine + Loteprednoleye Drops 5Ml Eye Drop , Tolperisone150mg Tablets , Tolperisone Sr 450 Mg Tab. , Tolvaptan 15 Mg Tablets , Tolvaptan 30Mg Tablets , Toomey Glass Syringes; 100Ml , Toomey Glass Syringes; 50Ml , Topiramate 100 Mg Tab. , Topiramate 25 Mg Tab. , Topiramate 50 Mg Tab. , Torasemide 20 Mginj. , Torsemide 100 Mg Inj. , Torsemide Tablets , Tpi Lead 5, 6F Balloon Tiped , Tr Band , Tracheostomy Tube ( Pvc ) Sterile Single Use - ( Adult ) ( Size 7 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each ) , Tube , Tracheostomy Tube ( Pvc ) Sterile Single Use - ( Adult ) ( Size 8 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each ) , Tube , Tracheostomy Tube With Inner Canula Brush. All Size , Tracheostomy Tubes Cuffed All Size , Tracheostomy Tubes Fuller Jaction All Size , Tracheostomy Tubes Plain All Size , Tramadol + Paracetamol 50+500Mg Tab , Tramadol 37.5+ Dicyclomine Hydrocloride 20 + Pracetamol 325 Tab. , Tramadol 50Mgcap , Transducer For Intraparenchymal Icp Measurement ( Disposable ) , Transducer Protector , Transobturator Tape Sling 45 Cm Length. , Transparent Non Adherent Intra Venous Fixation Device Size 3Cmx3cm , Transparent Non Adherent Intra Venous Fixation Device Size 3Cmx3cm , Transpore Surgical Tape 2.5Cmx 9.1 Meter , Travoprost 0.004 %W / V, 5Ml Eye Drops , Travoprost 0.004% 3Ml Eye Drop , Travoprost Ip 0.004%W / V + Benzalkonium Chloride Solution Ip 0.02%V / V ( As Preservative ) Eye Drop , Tretinoin 0.1 %W / W, Gel , Tretinoin Usp 0.04% W / W ( As Redispheres ) In Aqueous Gel Base, Preservative: Sorbic Acid Ip 0.1% W / W Benzyl Alcohol Ip 0.5 % W / W, Tubeointment , Triamcinolone Acetonide ( 0.1% W / W ) In Buccal Pastointment , Trichlor Acetic Acid Crystal ( 1 Kg ) Solution , Trichloroacetic Acidointment , Tricholine Citrate 0.275 G , Sorbitol 7.15 G / 10 Ml ( 200Ml ) Syp. , Triclofos Sodium 500 Mg Syp. , Triclofos Sodium Bp 500 Gm In A Flavoured Syrup Base Bottle Of 30 Ml Syp. , Trifluoperazine 5 Mg Tab. , Trineptin 12.5 Mg Tab. , Trioxalen5 Mg Tab. , Trioxalen 25 Mg Tab. , Trioxaleneointment , Triple Layer Molded Face Masks - Fluid Resistant, Latex Free, 50 / Pkg - , Triple Lumen -- Cvc 4.5 Fr / 6 Cm , Triple Lumen -- Cvc 5.5 Fr / 8 Cm , Triple Lumen Catheter Full Set With Rolleson Syringe. , Triple Lumen --Cvc7fr / 12Cm , Triple Lumen --Cvc7fr / 15Cm , Triple Lumen Hd Cath 11Fr , Triple-Lumen Tip To Prevent Clogging Inside The Applicator , Waterproof Transparent Film Dressing Size 6Cm Dia With 3.5 Cm Dia Non Adherent Absorbent Pad , Tripong Forceps For Pcnl , Tripong Forceps For Ursl , Triway Cannuala . , Trucut Biopsy Needle 18 G Length 15 Cm , Trus Guided Prostate Biopsy Gun; Coaxial, Trucut, 18G, 25Cm , Trypan Blue Solution1 Ml Eye Drop , Tryphan Blue Vials Inj. , Trypsin-Chymotrypsin 50000 Au+Diclofenac 50 Mg Tab , Ttravoprost - Timolol 5Ml Eye Drop , Tube Ex Changer With Insertion Aid In One With 15Mm Connectors And Lure Lock Connections Should Have Depath Mark- Sizes - 2.5, 6.0 . , Tube Kojic Acid 2% W / W Arbutin 1.5 % W / W Mulberry Extract 1 % W / W Octinoate 7.5 % W / W Tube Of 15 Gm 1. , Tulle Grass Paraffin Gauze Dressing Sterile Leno Weave With Soft Paraffin Base. Size 15Cm*2Mtr , Tur Set , Tur Sets For Irrigation, Y Shape , Tur Silicon Tubings , Turp Drape; Turp Drape With Release And Absorbent ( 60 Gsm Sms 228 Cm X 178 Cm 5 / Cm Width Release 229 Cm Absorbent Layer 112 Cm X 92 Cm With Release Paper 38 Cm X 38 Cm , Turp Set. , Turpentine Oilointment , Twister Guide Wire , Two Stage Venous Cannulamultiport Tips With Atrial Baskets Sizes-28 / 36, 32 / 40 Fr. , Two Stage Venous Cannula Multiport Tips With Atrial Baskets Sizes-28 / 36, 32 / 40 Fr, 36 / 46Fr. , Two Stage Venous Cannula Multiport Tips With Atrial Baskets Sizes-28 / 36, 32 / 40 Fr. , Typhoid Vaccine Ui25 Mgc Inj. , Tyshak Balloon / Atlas Balloon 20-30Mm , Ultra Guard With 0.02 Micro Pall Filter. , Ultra Sound Jelly 250Ml Bottle . , Ultraflux Av 600S; Effective Surface Area 1.4 Sqm ;Wall Thickness 35 Micrometer;Membrane Polysulphone , Housing Material Polycarbonate , Potting Compound Polyurethane With Inline Steam Sterilisation;Inner Wall Thickness 220 Micrometer;Blood Filling Volume 100 Ml , Ultrasound Thermal Printer Rolls . , Ultraverse 014 -Btk Balloon 014 Dual Layer Hydrophilic Coating & Checker Flex Points For Unmatched Trackability With Innovative Reinforced Inner Lumen For Better Pushabilitydiameter :1.5 Mm To 5.0 Mm & Length: 20- 300 Mm. , Ultraverse 035Atk Balloon 035 Geoalign™ Marker Bands Are Designed To Increase Procedure Efficiency By Minimizing Fluoroscopy Exposure With Sheath Profile 5F Compatible Up To 8 X 80 Mm*Diameters: 3 - 12 Mm, & Lengths: 20 - 300 Mm , Umbilical Cotton Tape Sterile76 Cm X 3 Mm X 2 , Umbilical Cotton Tape Usp 2 Mm Wide X Length 75Cms , Uncoated Bi-Layer Lets Of Paracetamol Ip Er 675 Mg Tab. , Uncoated Bi-Layer Lets Of Paracetamol Ip Ir 325 Mg Tab. , Uncoated Low Profile Lightweight Monofilament Polypropylene Mesh Allows Complete Tissue In Growth , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges. Left Side, Medium Size:8.5 Cm X13.7 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Left Side, Extra Large Size: 12.4 Cm X17.3 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Left Side, Large Size:10.8 Cm X16 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Right Side, Extra Large Size: 12.4 Cm X17.3 Cm , Unique 3 Dimensional Anatomically Designed Polypropylene Mesh With Contour Shape Having Medial Orientation Marker & Crest Corresponding To Inguinal Ligament With Swaled Edges.Right Side, Large Size:10.8 Cm X16 Cm , Ureteral Catheter , Ureteral Dialator Set ( Teflon ) ; Serial Teflon Dialator, 6Fr To 16 Fr , Ureteral Indwelling Double Pigtail Stent, Both End Open / One End Closed ( D J Stent ) Sizes - 3, 3.5, 4., 4.5, 5.5, 6, 6.5, 7, 8, 9, 10F , Ureteral Stent Or Double J Stent , Ureteric Balloon Dilator; 5Cm, 15F, Burst Pressure 20 Atm , Ureteric Catheter - 6 Fr, Straight Tip, 70Cm, Open Ended , Ureteric Catheter, 3Fr, Straight Tip, 70Cm, Open Ended , Ureteric Catheter, 5Fr, Straight Tip, 70Cm, Open Ended , Ureteric Catheter, 6Fr, Straight Tip, 70Cm, Open Ended , Ureteroscopic Stone Retrieval Forceps, 3, 4 Fr, Triprong , Urethral Catheter Made Up Of Soft Color Less, Clear, Breathable, Odorless, 100% Silicon Having White Opaque Line And White Cyclindercal Balloon Tip 5 To 10 Ml Balloon Capacity. Sizes- 6, 8. , Urethral Catheter Made Up Of Soft Color Less, Clear, Breathable, Odorless, 100% Silicon Having White Opaque Line And White Cyclindercal Balloon Tip 5 To 10 Ml Balloon Capacity. Sizes-14, 16, 18, 20. , Methacrylate Based Oxygen Permeable Non Adherent 3 Dimensional Transforming Powder Dressing Size-4X4 , Urethral Stent , Urinary Drainage Bag ( Uro Bag ) 1 Lit . , Urinary Drainage Bag 2 Litre Cap With Non Return Valve ( Clinical Grade Pvc Sheet And Specially Designed Hook Facilities ) . , Urinary Drainage Bag 2 Litre Cap With Non Return Valve ( Eo Sterile ) , Urinary Drainage Bag 2 Litre With Uroflow Meter , Urine Sugar Kitone Diagnostic Stick 50 Strip , Uro Bag 100Ml ( Urine Collecting Bag With Measuring & Self Adhesive Facility ) . , Urograffin 76% Solution For Injection 50Ml Vial Bottle , Urokinase 5000 Iu Catheder Flushing Inj. , Ursodeoxy Cholic Acid 75 Mg Tab. , Usg Guided Kidney Biopsy Gun 16 G , Usg Guided Kidney Biopsy Gun 16G , Uv Protection Eye Cover With Adjustable Harnace, Double Protection Uv Filter, Absorbent Inner Layer, Ce Certified. ( With Uv Protection Certtificate. ) . , Vaccum Jar , Vaccum Outlet , Vaku 8 ( Vaccume Blood Collection Tube ) . , Vancomycin + Cefriaxone 1.5 Mg Inj. , Vancomycin 125 Mg Tablets , Varicose Veins Stockings S / M / L , Vascularhaemostatic Pad To Stop External Bleeding And Catheterization Site Bleeding , Chitosin Material, Size-2X2 Single Pack. Sterilized. . , Vascular Closer Device , Vascular Graft ( Ptfe / Ringed Ptfacron ) For Restoring Vascular Continuity, [ Straight Configuration ] Sizes- 4Mm, 6Mm, 8Mm, 10Mm , Vascular Graft ( Ptfe / Ringed Ptfacron ) ( Y Configuration ) .Sizes- 4Mm, 6Mm, 8Mm, 10Mm , Vascular Graft ( Ptfe / Ringed Ptfe / Dacron ) ( Y Configuration ) .Sizes- 4Mm, 6Mm, 8Mm, 10Mm , Vascular Hemostatic Dressing In Sponge / Pad Form Made Of 100% Natural Biopolymer With A Net Positive Charge, Gama Sterilize, Moisture Proof Packing. Ce, Usfda Approved. Sizes- 10*10, 8*8, 5*5, 8*5. , Vasopressin Ection 40 Iu / 1Ml ( Pfs ) Inj. , Vecuronium Bromide Inj 2Mg / Ml ( 2Ml Amp ) , Venlaflaxine 150 Mg Cap. , Venlaflaxine 37.5 Mg Cap. , Venlaflaxine Sr 150 Mg Cap. , Venlaflaxine Sr 75Mg Cap. , Venous Stent- Self Expanding, Nitinol Based, Should Be Designed Specifically For The Venous System, Should Be Self Expanding, Nitnol Based, Tri Axial Catheters And Dual Speed Thumbwheel System For Smooth And Controlled Stent Deployment , Ventricular External Csf Drainage System Contains One Bag 30Cm. Ventricular Catheter With Stylet, Connector, Trocar, Catheter, Anchoring Coller And Connecting Tube. . , Verapamil40 Mg Sugar Coated Tab. , Verapamil80 Mg Sugar Coated Tab. , Verapamil 5 Mg / 2 Ml Inj. , Vessel Cannula With And Without Valve.Should Have Clear And Radiopaque Bodies, With A Female Luer, Beveled And Blunt, Sizes- 3Mm, 4Mm , Vessel Cannula With And Without Valve. Should Have Clear And Radiopaque Bodies, With A Female Luer, Beveled And Blunt, Sizes- 3Mm, 4Mm , Vessel Sealer Rf-60 Proobs - Etrio 314H. , Vessel Sealer Rf-60 Proobs - Etrio 325H. , Vessel Sealer Rf-60 Proobs - Etrio 335H. , Vessel Sealer Rf-60 Proobs - Nseal514 Rh . , Vessel Sealer Rf-60 Proobs - Nseal525 Rh . , Vessel Sealer Rf-60 Proobs - Nseal535 Rh . , Vi B110mg, Vi B2 10Mg, Vi B6 3Mg, Vi B12 15Mcg, Nicotinamide 45Mg, Calcium Pantothenate 50Mg Tab. , Vibratory Positive Expiratory Pressure Device For Bronchial Hygiene Therapy With Green And Blue Color Coded , Vicryl 1 Cutting Body , Vicryl 2-0 Round Body , Vicryl 3-0 Round Body , Vicryl -Size - 1 ( 4.0 Metric ) 40Mm, 1 / 2 Circle Reverse Cutting, ( Os-8 ) 70Cm. , Video Camera Cable Cover Ultra Sound Cover ( Size-15X250cm. ) . , Vit A Syp 100000 Unit / Ml ( 100 Ml Bottle ) Syp. , Vit B12 500 Mcg / Ml 30 Ml Vail Inj. , Vit. E400 Mg Cap , Vitamin - B1 10Mg + B2 10Mg+ B6 3Mg+ B12 15Mcg+ Niacinamide 100Mg+ Calcium Panthenol 50Mg+ Folic Acid 1.5Mg+ Vitamin C 150Mg+ Biotin 100Mcg Tab , Vitamin A - 50000Iu Injection , Vitamin A ( Soft Gelatin ) 50000 I.U Cap , Vitamin A Cap Usp Soft Gelatin Capsule 1 Lakh Iu Tab. , Vitamin A Inj. , Vitamin A Usp Soft Gelatin Sule Each Contains Vitamin A-2 Lac Iucap. , Vitamin B12, 500Mg. Inj. , Vitamin C-100Mg Tab , Vitamin D Sachets 60000 Iu Sachet , Vitamin D3 1000Iutab. , Vitamin D3 2000Iutab. , Vitamin E 200 Mg Capsule , Vitamin. Asyrup. 200Ml Syp. , Vitamin. E400mg Cap. , Vitamin-C, 50Mg + Elemental Iron 30Mg + Folic Acid 200 Mcg + Vitamin B12 0.75 Mcg Film Coated Tablet Tab. , Voldyne Spirometer-Hand Held ( Built-In Handle ) Spirometer With 5000 Ml & 2500Ml Capacity To Measure Inspired Volume ( Volume-Oriented Device ) To Allow Accurate And Easy Recording Of Adult & Pediatric Patient Progress, Flow Rate Cup To Promote Slower Inhalation And Provide Effective Distribution Of Air To All Parts Of The Lung, Individually Calibrated And Tested, Graduations Printed On Both Sides Of Unit With Mouthpiece And Tubing , Volume Incentive Spirometer Oxygen Port. . , Voriconazole 200Mg / Vials Injection , Vp Shunt . , Vpmp Shunt , Warfarin 1Mg Tablets , Warfarin 2.5 Mg Tab. , Warfarin 2Mg Tablets , Warfarin 5Mgtablets , Water Bed . , White Field Ointment Jar 500Gm , White Petroleum Jellyointment , White Threat Coat Make No 10 , White Threat Coat Make No 40 , Winged Infusion Set With Injection Site 20 Gauge X 0.75 Inch . , Winged Infusion Set With Injection Site 20 Gauge X 1.00 Inch . , Winged Infusion Set With Injection Site 20 Gauge X 1.50 Inch . , Winged Infusion Set With Injection Site 22 Gauge X 1.00 Inch . , Winged Infusion Set With Injection Site 22 Gauge X 1.50 Inch . , Wound Irrigation Gel 30 Ml Pvc Free, Dehp Free Tube Containing 0.1% Polihexanide And 0.1% Betaine And Glycerol , Wound Irrigation Solution 350 Ml Pvc Free, Dehp Free Bottle Containing 0.1% Polihexanide And 0.1% Betaine , Wound Irrigation Spary Dressing Containing Silver In The Form Of Silver Nitrate, Peppermint Oil, Glycerol, Buffer & Tween 20, 100Ml , Wound Manager Drain Pouch With Skin Barrier 104-160 Mm / 160-208 Mm / 208-297 Mm , Wound Suctionset No 12 . , Wound Suctionset No 14 . , Wound Suctionset No 16 . , Wound Suction Set No. 18 . , Wrist Forearm Splint ( Left & Right ) S / M / L , Wypoll 10 Pcs With Bacto Foam 180 Ml. Spray , Xanthinol Nicotinate150 Mg Tab. , Xience Xpedition Stent Complete Sizes Sequence , Xpedionmicroguide Wire , Xpedion Micro Guide Catheter , X-Ray Draier , X-Ray Film ( Blue Sensitivity ) 10*12 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 12*12 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 12*15 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 14*14 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 14*17 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 6 * 12 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 6.5 * 8.5 ( 50 Sheet Packet ) , X-Ray Film ( Blue Sensitivity ) 8 * 10 ( 50 Sheet Packet ) , X-Ray Lead Apron Heavy , Xylocaine 4% Injection , Xylocaine Spray 10%50Ml. Spray , Xylocan Spary 2% Spary , Y Connector Push & Click , Yankar Suction Catheter . , Yankauer Suction Set ( With Tube & Suction Handle ) , Yankauer Suction Setyankauer Suction Handle With Flexible Kink-Resistant Tube , Y-Connector , Yukon Choice Flex Stent Complete Sizes Sequence , Yukon Choice Pc Stent Complete Sizes Sequence , Z-Fold Paper ( 150 Sheet Packet ) A4-Size Paper , Zinc 50Mg. Tab. , Zinc Sulfate Monohydrate 20Mg Tab. , Ziprasidone20 Mg Tab. , Ziprasidone40 Mg Tab. , Ziprasidone50 Mg Tab. , Zoledronate 5 Mg / 100Ml Inj. , Zuclopenthixol 200 Mg. Inj. , Zuclopenthixol 50 Mg Inj.
Contract Date: Feb 06, 2026 Contract Value : ₹ 70
Boards / Undertakings / PSU No of Bidders 32
Madhya Pradesh View Result →
45.
Drinking Water Supply and Sanitation #9387165 AOC
Request Proposal For Supplying Various Equipment, Chemicals, Standard Reference Microbial Cultures, Glasswares/ Plasticwares And General Items In 9 Numbers Of District Level Water Testing Laboratories Of Jharkhand A-Dumka Zone , Refrigerator- ( 265 Litre Approx., Double Door ),Make & Model: Branded ( Is Standard) , Analytical Balance-( 4Digit), Weighing Capacity Of 220G, Externally Calibrated By Nabl Accredited Lab/Agency With Calibration Certificate, Make & Model: Branded) ( Is Standard) , Ph Meter-(Measuring Range Ph0.0-14.0), Make & Model: Branded ( Is Standard) , Hot Plate With Magnetic Stirrer-(Power: 2000 Watt Approx., Operating Volts: 230A15 Volts A/C), Stirring Capacity: 50-1500 Rpm, Capacity Of Stirrer: 2 Litre, Plate Size: 18.4X18.4 Cm(Approx.), Make & Model: Branded , Bacteriological Incubator-Digital Construction -Double Walled Construction Outer Body Made Of Mild Steel Powder Coated & Inner Body Made Of Stainless Steel, Insulation : Glass Woll Insulation Between Two Walls. Inner Size : 18 X 18 X 24, Rating Watts 750, No. Of Shelves 3, Capacity 120 Ltrs, Temp Range- 5°C - 60°C Accuracy +/- 0.5°C, Temp Controlled By : Controlled By Pid Micro Process Controller With Dual Display. Selves : With G.I. Wire Mesh Selves, Door : 2 Door Inner Acrylic Door To View Sample & Outer Metal Door With Air Circulation Motor With Blower For Uniform Temperature Throughout Chamber. Heater : Special Nichrome Heater Designed For Long Life & Saving Of Power Consuption. Thermometer Type : Electronic With Digital Display. Make & Model : Branded ( Is Standard) , Laminar Air Flow Chamber(Biosafety Cabinet)-External Dimensions (Lxwxh) In Inches And Mm:40’’ X34.25’’X56.7, (1020 X870x 1440) Work Area Dimensions:34.45’’X24’’X22.52’’(857X610x572) Material Of Construction: Galvanised Iron Sheet With Epoxy Polyester Thermosetting Powder Coating Of 80 Microns, 1.5Mm Thickness/Stainless Steel Grade 304,1.2Mm For Ss Modelsbody Finish: Glossy Off White Colour For Gi Powder Coated Table Top: 1.2Mm Ss 304 Sheet Of Matt Finish Pressed On 25Mm Solid Nuwud Board Side Glass: 6Mm Float Glass Encased In Stainless Steel Channels Front Door: Frameless Gas Spring Loaded Swinging Type Polycarbonate 6Mm Thickness Wheels And Levelling Lugs: Pu Solid Wheels With Plated Brackets And Metallic Powder Coated Design: Front Bottom Loading Pre-Filters Or Completer Work Area With Stainless Steel Including Hepa Grill Cleanliness Class: Iso Standard 14644-1- Class 5 Stages Of Filtration: A.Pre-Filters= 10?With An Efficiency Of 90 % Washable Hdpe Media In Frp Pu Coated Frame B.Mini Pleat Hepa Filter Encased Aluminium Frame With An Efficiency Of 99.995%Motor Blower Assembly: Variable Speed Mtor Mounted On Pu Coated Frp Blowers With Aluminium Powder Coated Impellers Velocity: 100 Fpm At 6’’ From Face Of The Filter Noise Level: Less Than 60Db At 1 Meter From The Face Of The Equipment Hepa Filter Grill: Stainless Steel Grills Duly Perforated And Polished Electrical Specifications: A. Switches And Speed Controller: Microprocessor Controlled Feather Touch Switch Panel B. Fluorescent Lighting: 18 Watt. C. Chokes For Lighting: 18 Watt D. Ultraviolet Lighting: 1.5 Feet Length G15t8, 15 Watt Power Consumption: 250 Watts Lighting: Greater Than 800 Lux Power Supply: 230V,50Hz Power Supply, Single Phase 5 Amperes Power Cord Accessories: Gas Burner, Gas/Vacuum Cock ( Is Standard) , Autoclave -Vertical Autoclave Size 14 Dia X 22 Ht, Rating In Watts 3000, Capacity Of 52 Ltrs Complete S.S With Foot Lifting Arrangement Used For Sterilization Under Saturated Steam Pressure At 15Psi With Double Walled Units With Inner Chamber Made Of Thick Stainless Steel And Outer Chamber Made Of S.S.Lid Is Made Of Thick Gauge Stainless Steel With Pressure Gauge Steam Release Valve, And Safety Valves. With Foot Lifting Arrangement. With S.S. Basket Accessories:1. Digital Temperature Indicator Cum Controller With Timer -1 No.2. Water Level Cut Off-1No.3. Pressure Cut Off Switch-1No. ( Is Standard) , Digital Colony Counter-Colony Counter 6 Digit Seven Segment, Range : 0-9999 With Averaging, Count Correction And 100 Sample Storage Facility Accessories: Marking Pen -1No. Magnifying Lens-1No., Lens Holder-1No, Instruction Manual-1No, Dual Cover-1No. ( Is Standard) , Three Place Membrane Filtration Assembly 1. Filter Funnel S.S 316 With Inbuilt S.S Clamp & Neoprene Lid & Cork Capacity Of 150 Ml - Qty 3 2.Manifold Three Place S.S With Ptfe Valve - Qty 1 3. Membrane Filter C.N 47 Mm/0.45-Micron Pack Of 100 - Qty 1 4. Vacuum Flask (With Cork And Side Nozzle) Of Two Litters Capacity - Qty 1 5. Vacuum Pump Diaphragm Type-Oil Free - Qty 1 6. Air Vent Filter-Hydrophobic Ptfe 50 Mm/0.2 Micron - Qty 1 7. Ptfe Syringe Filter 25 Mm/0.2 Micron With Needle - Qty 1 8. Flexible Silicon Tubing 1-2 Mtr - Qty 1 ( Is Standard) , Vortex Machine - Shaking Movement – Orbital, Orbital Diameter- 4Mm Motor Type-Shaded Pole Motor Speed Range- 0 To 2500 Rpm Dimensions(Mm)- 178X141x148 ( Is Standard) , Micropipette-(1Ml Variable), Make: Branded ( Is Standard) , M-Endo Agar Les M1106-500G ( Is Standard) , M-Fc Agar Base M1122-500G ( Is Standard) , Agar Agar, Type I, Grm666-500G ( Is Standard) , Sodium Thiosulphate (Hypo), 500G ( Is Standard) , Ethanol, 500Ml ( Is Standard) , Escherichia Coli Atccr25922tm* ( Is Standard) , Enterobacter Aerogenes Or Klebsiella Aerogenes Atccr35029tm* ( Is Standard) , Pseudomonas Aeroginosa Atccr27853tm* ( Is Standard) , Filter Membrane (Nitrocellulose) 0.45?M, 47Mm Dia.(Pack Of 50 ) - Sterile ( Is Standard) , Filtering Flask Boat Neck Tubulation-2000 Ml ( Is Standard) , Conical Flask With Screw Cap, 250 Ml ( Is Standard) , Conical Flask With Screw Cap, 500 Ml ( Is Standard) , Conical Flask With Screw Cap, 1000 Ml ( Is Standard) , Pipette-1Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Pipette-2Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Pipette-5Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Pipette,10Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Beaker Griffin Low Form With Spout 150 Ml ( Is Standard) , Beaker Griffin Low Form With Spout 500 Ml ( Is Standard) , Beaker Griffin Low Form With Spout 1000 Ml ( Is Standard) , Beaker Griffin Low Form With Spout 2000 Ml ( Is Standard) , Reagent Bottle Graduated With Screw Cap And Pouring Ring, 250 Ml ( Is Standard) , Reagent Bottle Graduated With Screw Cap And Pouring Ring, 500 Ml ( Is Standard) , Reagent Bottle Graduated With Screw Cap And Pouring Ring, 1000 Ml ( Is Standard) , Reagent Bottle Graduated With Screw Cap And Pouring Ring, 2000 Ml ( Is Standard) , Standard Volumetric Flask 25 Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Standard Volumetric Flask 50 Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Standard Volumetric Flask 100 Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Standard Volumetric Flask 250 Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Standard Volumetric Flask 500 Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Standard Volumetric Flask 1000 Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Measuring Cylinder, 50Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Measuring Cylinder, 100Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Measuring Cylinder, 500Ml ( Is Standard), With External Calibration Certificate From Nabl Accredited Calibration Lab/Agency , Trays With Small Holes At Bottom (Medium Size) ( Is Standard) , Pipette Pump / Pipette Aspirator ( Is Standard) , Pipette Rack Stand Acrylic (190X135x265mm) ( Is Standard) , Slide Box Abs 50 Piece Coverslip 18Mm ( Is Standard) , Coverslip 18Mm ( Is Standard) , Micropipette Fixed (1000?L/1Ml) ( Is Standard) , Micro Tips, Bulk In Resealable Bags Capacity (100?L To 1000?L) 500/Pkt ( Is Standard) , Empty Micro Tips Box Pp For Tip Capacity 100?L To 1000?L,96 Places Tips Holding Box/Stand ( Is Standard) , Test Tube Brush Small ( Is Standard) , Test Tube Brush Medium ( Is Standard) , Test Tube Brush Large ( Is Standard) , Forceps 6 Blunt ( Is Standard) , Forceps 6 Pointed ( Is Standard) , Forceps 8 Blunt ( Is Standard) , Forceps 8 Blunt ( Is Standard) , Spirit Lamp Aluminium ( Is Standard) , Biohazard Disposable Bag (Autoclavable), Pp 12× 18 Pack Of 200 ( Is Standard) , Hot Mill Gloves / Temperature-Resistant (Pairs) ( Is Standard) , Nitrile/Normal Hand Gloves Large 9.5 (Large Size) (1Pkt) ( Is Standard) , Nitrile/Normal Hand Gloves Medium 9.5 (Medium Size) (1Pkt) ( Is Standard) , Tissue Rolls ( Is Standard) , Inoculating Needle With Metal Loop ( Is Standard) , Spatula ( One Side Spoon One Side Flat)Medium ( Is Standard) , Spatula ( One Side Spoon One Side Flat)Large ( Is Standard) , Weighing Boats Standard, Ps For Tubes Dia Medium Blue (Pack Of 250) ( Is Standard) , Petriplates, 60Mm Size (A Pack Of 300Pcs.) ( Is Standard) , Sampling Bottles (Autoclavable), 500Ml Capacity ( Is Standard) , Sampling Bottles (Autoclavable), 1000Ml Capacity ( Is Standard) , Cotton Rolls ( Is Standard) , Silver/Aluminium Foil ( Is Standard) , Label Stickers ( Is Standard) , Marker Pens (Blue, Green) ( Is Standard)
Contract Date: Feb 16, 2026 Contract Value : ₹ 2.59 Crore
Government Departments No of Bidders 3
Jharkhand View Result →
46.
Defence #9357398 Technical Bid
Establishment Of Integrated Analytical Laboratory For Demil Plant , Hot Air Oven , Magnetic Stirrer , Heating Cooling Circulator , Rotary Evaporator With Chiller And Vacuum Pump , Ultrasonic Cleaner , High Speed Orbital Shaker , Vacuum Pump , Peristaltic Pump , Benchtop Ph Meter With Orp Electrode & Necessary Buffers, Electrode Storage Solution & Electrode Cleaning Solution , Dissolved Oxygen Meter , Turbidity Meter , Bench Top Multi-Parameter Tester (Conductivity, Tds, Salinity, Ph) , Bod Incubator , Cod Digestor System , Vortex Mixer , Effluent Sampling Manifold (Esm) With Controlled Cobustion Chamber (Ccc) , Analytical Balance , Laboratory Balance , Mini Centrifuge Machine , Gyro Shaker , Melting Point Apparatus , Electric Bunsen Burner , Deep Freezer , Laboratory Rrefrigerator , Ultra-Pure Water Purification System , Muffle Furnace , Double Distillation Unit , Probe Sonicator , Heating Mantles , Systematic Design , Partitions , Equipment Console With Work And Storage Modules , Chemical Reagent Console With Work And Storage Modules , Instrument Console With Work And Storage Modules , Overhead Storage Console , Extended Office Console , Office Console , File Storage Console , Record Management Console , Back Positioning Module , Fire Protection Modules , Fume Closet , Exhaust Manifold , Power Reserve (40 Kva) , Elemental (Chnso)Analyzer , Inductively Coupled Plasma - Mass Spectrometer (Icp-Ms) , Microwave Digestion System , Amc Cost For 1St Year After Expiry Of Warranty Period , Amc Cost For 2Nd Year After Expiry Of Warranty Period , Amc Cost For 3Rd Year After Expiry Of Warranty Period
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
47.
Power #9334485 Technical Bid
Supply Of Electrical Spares And Minor Stores Hardware Items From The Original Equipment Supply Of Electrical Spares And Minor Stores Hardware Items From The Original Equipment Manufacturer, Their Authorized Dealer Local Representative Or Local Ssi Units Or Registered Firms Suppliers Already In The Trade For The Year 2025-26 , Hardware Fitings And Accessories,Clamps And Connectors For Acsr /Aaac Conductor , Single Suspension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Ultimate Tensile Strength Of (H/W) 7000Kglikelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc (Station Type) , Single Suspension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Ultimate Tensile Strength Of (H/W) 7000Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc (Line Type ) , Single Tension Hardware Fitting For Acsr Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg,Uts/Slip Strength Of Clamp = 95% Of Uts Of Conductor = 8550 Kg , Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Station Type ) , Single Tension Hardware Fitting For Acsr Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg,Uts/Slip Strength Of Clamp = 95% Of Uts Of Conductor = 8550 Kg , Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided( Line Type) , Double Suspension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators.,Uts Of Hardware=7000Kglikelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc.. (Station Type) , Double Suspension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Suspension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators.,Uts Of Hardware=7000Kglikelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Line Type ) , Double Tension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators., Uts Of Hardware= 9000Kg. Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided ( Station Type) , Double Tension Hardware Fitting For Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators., Uts Of Hardware= 9000Kg. Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc ( Line Type) , Single Tension Fitting For Acsr Twin Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor= 8550 Kg,Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc (Station Type) , Single Tension Fitting For Acsr Twin Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor= 8550 Kg,Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc (Line Type) , Single Suspension Fitting For Acsr Twin Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc (Station Type) , Single Suspension Fitting For Acsr Twin Zebra Conductor Conforming To Is 2486 (Part-I) Ammended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators.,Uts Of Hardware = 9000Kg Uts / Slip Strength Of Clamp = 95% Uts Of Conductor = 8550 Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc (Line Type) , Single Suspension Hardware Fitting For Aaac Pantherconductor 37/3.15Mm Conforming To Is 2486 (Part-I) Amended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Hardware=7000Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Single Tension Hardware Fitting For Aaacpanther Conductor Conforming To Is 2486 (Part-I) Amended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators., Uts Hardware = 9000Kg Uts/Slip Strength Of Clamp = 95% Of Uts Of Conductor= 8550Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Single Tension Hardware Fitting For Acsr Moose Conductor Conforming To Is 2486 (Part-I) Amended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 20Mm B&S 120Kn Disc Insulators., Uts Hardware = 9000Kg Uts/Slip Strength Of Clamp = 95% Of Uts Of Conductor= 8550Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Double Suspension Hardware Fitting For Aaac Pantherconductor Conforming To Is 2486(Part-I) Amended Upto Date) And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 7000Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Double Tension Hardware Fitting For Aaac Panther Conductor Conforming To Is 2486 (Part-I) Amended Upto Date And The Specification Stipulated In Sec. Iii Of This Tender Document Having Tension Clamp Of Al Alloy Grade-A6(Is: 617-1975), Ferrous Parts Hot Dip Galvanized (Is: 2633 1986 ) Suitable For 16Mm B&S 70Kn Disc Insulators., Uts Of Hardware = 7000Kg Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Compression Type Repair Sleeve Suitable For Aaac Panther Conductor Of 37/3.15Mm Designation With Body And Keeper Made Of Aluminum Alloy For Providing Reinforcement Of Conductor With Broken/Damaged Aluminum Strands. Repair Sleeve Should Conform To Is: 2121/1981 (With Latest Amendments Up To Date) And Should Present A Smooth Surface After Compression Min Failing Load= 95% Uts Of Conductor= 7654Kg Compression Pressure= 100Tons For Al Electrical Resistanceat 20Oc=75% Of Measured Resistance Ofequivalent Length Of Conductor Corona Formation Voltage= 110% Of Max Line To Groundvoltage , Compression Type Repair Sleeve Suitable For Acsr Panther Conductor Of 37/3.15Mm Designation With Body And Keeper Made Of Aluminum Alloy For Providing Reinforcement Of Conductor With Broken/Damaged Aluminum Strands. Repair Sleeve Should Conform To Is: 2121/1981 (With Latest Amendments Up To Date) And Should Present A Smooth Surface After Compression Min Failing Load= 95% Uts Of Conductor= 7654Kg Compression Pressure= 100Tons For Al Electrical Resistanceat 20Oc=75% Of Measured Resistance Ofequivalent Length Of Conductor Corona Formation Voltage= 110% Of Max Line To Groundvoltage , Compression Type Repair Sleeve Suitable For Acsrzebra/Moose Conductor Of 37/3.15Mm Designation With Body And Keeper Made Of Aluminum Alloy For Providing Reinforcement Of Conductor With Broken/Damaged Aluminum Strands. Repair Sleeve Should Conform To Is: 2121/1981 (With Latest Amendments Up To Date) And Should Present A Smooth Surface After Compression Min Failing Load= 95% Uts Of Conductor= 7654Kg Compression Pressure= 100Tons For Al Electrical Resistanceat 20Oc=75% Of Measured Resistance Ofequivalent Length Of Conductor Corona Formation Voltage= 110% Of Max Line To Groundvoltage , 4R Stock Bridge Type Vibration Damper Suitable For Aaac :Panther (Of 37/3.15Mm Designation) Of Approved Design. The Clamps And Keeper Of The Vibration Damper Shall Be Made To Al Alloy So Designed As To Prevent Any Damage To Or Chafting Of The Conductor, During Erection Or Continued Operation. Clamping Bolts, Washers Should Of Mild Steel/Hdg Provided With Self Locking Nuts Designed To Prevent Corrosion Of The Threads. All Ferrous Parts Including The Messenger Cable Shall Be Hot Dip Galvanized (Is 2633). The Ends Of Messenger Cable Shall Be Effectively Sealed To Prevent Corrosion. Spring Washers Should Be Electro Galvanized Dampers Mass Should Be Of Cast Iron Hdg Conforming To Is 9708 Of 1980 Total Wt Of The Item Shall Be = 2.4Kg, Slip Strength = 2.5Kn Before Fatigue Test, Slip Strength = 2.0Kn After Fatigue Test , 4R Stock Bridge Type Vibration Damper Suitable For Aaac Panther (Of 37/2.88Mm Designation) Of Approved Design. The Clamps And Keeper Of The Vibration Damper Shall Be Made To Al Alloy So Designed As To Prevent Any Damage To Or Chafting Of The Conductor, During Erection Or Continued Operation. Clamping Bolts, Washers Should Of Mild Steel/Hdg Provided With Self Locking Nuts Designed To Prevent Corrosion Of The Threads. All Ferrous Parts Including The Messenger Cable Shall Be Hot Dip Galvanized (Is 2633). The Ends Of Messenger Cable Shall Be Effectively Sealed To Prevent Corrosion. Spring Washers Should Be Electro Galvanized Dampers Mass Should Be Of Cast Iron Hdg Conforming To Is 9708 Of 1980 Total Wt Of The Item Shall Be = 2.4Kg, Slip Strength = 2.5Kn Before Fatigue Test, Slip Strength = 2.0Kn After Fatigue Test , 4R Stock Bridge Type Vibration Damper Suitable For Acsr Panther (Of 37/3.15Mm Designation) Of Approved Design. The Clamps And Keeper Of The Vibration Damper Shall Be Made To Al Alloy So Designed As To Prevent Any Damage To Or Chafting Of The Conductor, During Erection Or Continued Operation. Clamping Bolts, Washers Should Of Mild Steel/Hdg Provided With Self Locking Nuts Designed To Prevent Corrosion Of The Threads. All Ferrous Parts Including The Messenger Cable Shall Be Hot Dip Galvanized (Is 2633). The Ends Of Messenger Cable Shall Be Effectively Sealed To Prevent Corrosion. Spring Washers Should Be Electro Galvanized Dampers Mass Should Be Of Cast Iron Hdg Conforming To Is 9708 Of 1980 Total Wt Of The Item Shall Be = 2.4Kg, Slip Strength = 2.5Kn Before Fatigue Test, Slip Strength = 2.0Kn After Fatigue Test , 4R Stock Bridge Type Vibration Damper Suitable For Acsr Panther (Of 37/2.88Mm Designation) Of Approved Design. The Clamps And Keeper Of The Vibration Damper Shall Be Made To Al Alloy So Designed As To Prevent Any Damage To Or Chafting Of The Conductor, During Erection Or Continued Operation. Clamping Bolts, Washers Should Of Mild Steel/Hdg Provided With Self Locking Nuts Designed To Prevent Corrosion Of The Threads. All Ferrous Parts Including The Messenger Cable Shall Be Hot Dip Galvanized (Is 2633). The Ends Of Messenger Cable Shall Be Effectively Sealed To Prevent Corrosion. Spring Washers Should Be Electro Galvanized Dampers Mass Should Be Of Cast Iron Hdg Conforming To Is 9708 Of 1980 Total Wt Of The Item Shall Be = 2.4Kg, Slip Strength = 2.5Kn Before Fatigue Test, Slip Strength = 2.0Kn After Fatigue Test , Mid Span Compression Joint For Acsr Panther (Of 37/3.15Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load(Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve= Extruded Al Tube Of 99.5 % Purity , Inner Sleeve= High Tensile Steel, Elect Resistance At 20Oc= 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts =Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Mid Span Compression Joint For Acsrpanther (Of 37/2.88Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load(Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve= Extruded Al Tube Of 99.5 % Purity , Inner Sleeve= High Tensile Steel, Elect Resistance At 20Oc= 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts =Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Mid Span Compression Joint For Aaac Panther (Of 37/3.15Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load(Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve= Extruded Al Tube Of 99.5 % Purity , Inner Sleeve= High Tensile Steel, Elect Resistance At 20Oc= 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts =Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Mid Span Compression Joint For Aaacpanther (Of 37/2.88Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load(Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve= Extruded Al Tube Of 99.5 % Purity , Inner Sleeve= High Tensile Steel, Elect Resistance At 20Oc= 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts =Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Mid Span Compression Joint For Acsr Zebra(Of 54/7/3.18Mm Designation) Suitable For Making Joints In The Conductor So Designed That On Installation No Air Space Is Left Within The Finished Joint. The Al Sleeve Used Should Be Of Extruded Al Tube Of Purity Not Less Than 95% While As Steel Sleeve Should Of High Strength Steel.Minimum Failing Load(Slip Strength) = 95% Uts Of Conductor = 7654Kg, Outer Sleeve= Extruded Al Tube Of 99.5 % Purity , Inner Sleeve= High Tensile Steel, Elect Resistance At 20Oc= 75% Of Measured Resistance Of Equivalent Length Of Conductor, Ferrous Parts =Hot Dip Galvanized , Compression Rate = 100Ton For Ac , Armour Rods Helically Twisted Suitable For Acsr Panther To Provide Rigidity And Protection To The Conductor At All Suspension Parts And Also To Eliminate The Fatigue On The Conductor Due To Vibration And Corona.Type : Performed , Materialal/Al Alloy ,Purity Of Al : Ec Grade 95.5%,Corona Formation:110% Of Max Line To Ground Voltage , Consilic Strength 35Kg/Mm2, Slip Strength 25% Uts Of Conductor , Ends :Ball Ended, Erection Of Lay Of Rods :Right Hand Lay , Armour Rods Helically Twisted Suitable For Acsr Zebra To Provide Rigidity And Protection To The Conductor At All Suspension Parts And Also To Eliminate The Fatigue On The Conductor Due To Vibration And Corona.Type : Performed , Materialal/Al Alloy ,Purity Of Al : Ec Grade 95.5%,Corona Formation:110% Of Max Line To Ground Voltage , Consilic Strength 35Kg/Mm2, Slip Strength 25% Uts Of Conductor , Ends :Ball Ended, Erection Of Lay Of Rods :Right Hand Lay , Armour Rods Helically Twisted Suitable For Acsr Panther To Provide Rigidity And Protection To The Conductor At All Suspension Parts And Also To Eliminate The Fatigue On The Conductor Due To Vibration And Corona.Type : Performed , Materialal/Al Alloy ,Purity Of Al : Ec Grade 95.5%,Corona Formation:110% Of Max Line To Ground Voltage , Consilic Strength 35Kg/Mm2, Slip Strength 25% Uts Of Conductor , Ends :Ball Ended, Erection Of Lay Of Rods :Right Hand Lay , Armour Rods Helically Twisted Suitable For Aaac Panther To Provide Rigidity And Protection To The Conductor At All Suspension Parts And Also To Eliminate The Fatigue On The Conductor Due To Vibration And Corona.Type : Performed , Material Al/Al Alloy ,Purity Of Al : Ec Grade 95.5%,Corona Formation:110% Of Max Line To Ground Voltage , Consilic Strength 35Kg/Mm2, Slip Strength 25% Uts Of Conductor , Ends :Ball Ended, Erection Of Lay Of Rods :Right Hand Lay , Disc Insulator 70Kn B&S Type, Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 70Kn B&S Type, Without Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 90Kn B&S Type, Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 90Kn B&S Type, Without Anti Fog(Reputed Make/ Already Use In Pdd) , Disc Insulator 120Kn B&S Type, Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 120Kn B&S Type, Without Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 160Kn B&S Type, Anti Fog (Reputed Make/ Already Use In Pdd) , Disc Insulator 160Kn B&S Type, Without Anti Fog (Reputed Make/ Already Use In Pdd) , Gi Nuts And Bolts Of Sorts (16Mmx35mm/ 40Mm/45Mm/50Mm & 65Mm) Heavy Duty , Gi Nuts And Bolts Of Sorts (10Mmx75mm) Heavy Duty , Gi Nuts And Bolts Of Sorts (10Mmx50mm) Heavy Duty , Gi Nuts And Bolts Of Sorts (12Mmx50mm) Heavy Duty , Aluminium Cable Tray Of Size 400 Mm X3000 Mm , Aluminium Cable Tray Of Size 300 Mm X2500 Mm , M.S. Angle Iron Of Size (45X45x5)Mm , M.S. Angle Iron Of Size (50X50x5) Mm , Steel Tor Of Dia 8Mm , 10Mm, 12Mm For Cable Ducts , Spring Washers 16Mm Heavy Duty , G. I Wire Swg No. 8/ 4.06Mm Dia , Red Oxide Enamel Paint (Asian, Nerolac/ Berger) , Al. Paint (Asian, Nerolac/ Berger) , Smoke Grey Enamel Paint , Al. Alloy As Per Is: 617 Of 1975 Pg Clamps 3 Bolt Type Conforming To Is: 5561-1970 (Amended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor. Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975 Pg Clamps 3 Bolt Type Conforming To Is: 5561-1970 (Amended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Mooseconductor. Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975 Pg Clamps Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor. Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975 T-Clamps 3 Bolt Type Conforming To Is: 5561-1970 (Amended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor. Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc/ As Per Departmental Sample Provided , Al. Alloy As Per Is: 617 Of 1975 T- Clamps Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor.Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975 T- Clamps Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Moose Conductor.Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Ct Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Ct Terminals Suitable For 220/132Kv/33Kv Cts Of Makes/Ae Mumbai, Sct Gaziabad, Bhel, Vidhyut Control System Andhra, Mehru Bhiwadi/ Laxshmi Engg Bhopal, Jyoti, Equilent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Ct Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Moose Conductor With Ct Terminals Suitable For 220/132Kv/33Kv Cts Of Makes/Ae Mumbai, Sct Gaziabad, Bhel, Vidhyut Control System Andhra, Mehru Bhiwadi/ Laxshmi Engg Bhopal, Jyoti, Equilent Etc , Al. Alloy As Per Is: 617 Of 1975 Bimetallic Ct- Clamps Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther With Clamp Sutitable For 132/33Kv Ct’S Of Ae Mumbai, Sct Gaziabad, Bhel Vidhyut Control Andhra, Mehru Bhiwadi/ Laxmi Engg Bhopal, Jyoti.Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallictwin Ct Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Ct Terminals Suitable For 220/132Kv/33Kv Cts Of Makes/Ae Mumbai, Sct Gaziabad, Bhel, Vidhyut Control System Andhra, Mehru Bhiwadi/ Laxshmi Engg Bhopal, Jyoti, Equilent Etc , Al. Alloy As Per Is: 617 Of 1975, Bimetallicisolator Pad Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Mooseconductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Mooseconductor With Pad Terminals Suitable For 132/33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S, Gr Power, Skipper,Bimco.Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Isolator Pad Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S,Gr Power, Skipper, Bimco,Andhra Mech. Industries Etclikelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Isolator Pad Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S,Gr Power, Skipper, Bimco,Andhra Mech. Industries Etclikelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Twin Isolator Pad Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Pantherconductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S,Gr Power, Skipper, Bimco,Andhra Mech. Industries Etclikelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Metallic Twin Isolator Pad Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra /Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Isolators Of East Land, Elpro, Hivelm Calcutta, S&S,Gr Power, Skipper, Bimco,Andhra Mech. Industries Etclikelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bi-Mettalic Breaker Pad Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra Conductor With Pad Terminals Suitable For 220/132Kv /33Kv Breakers Of Sf 6 Type-Abb,Cgl, Siemens, Bhel/Vcb Type- S&S, Gec Alsthom, Bhel, Abb, Siemens, Megawin Etc. Likelymakes:Rul, Zi,Honeywell, Burma, Pee, Equivalent Etc , Al. Alloy As Per Is: 617 Of 1975, Bimetallic Breaker Pad Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Mooseconductor With Pad Terminals Suitable For 132Kv /33Kv Breaker Of Sf6 – Cgl, Abb, Siemens , Bhelvcb- S&S, Gec Alstom, Bhel, Abb, Siemens, Equivalentetc , Al. Alloy As Per Is: 617 Of 1975, Bimetallic Breaker Pad Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Panther Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Panther Conductor With Pad Terminals Suitable For 132Kv /33Kv Breaker Of Sf6 – Cgl, Abb, Siemens , Bhelvcb- S&S, Gec Alstom, Bhel, Abb, Siemens, Equivalentetc , Al. Alloy As Per Is: 617 Of 1975, Bimetallic La Twin Pad Clamp(Universal Take Off) Conforming To Is: 5561-1970 (Ammended Upto Date) And Those Stipulated In Section-Iii Of This Tender Document Suitable For Acsr Zebra/Moose Conductor Having Bolts Hot Dip Galvanized Nuts And Washers Electro Galvanized And Current Carrying Capacity Equivalent To Ampacity Of Zebra/Moose Conductor With Pad Terminals Suitable For 132Kv /33Kvla , P.I. Clamp For Acsr Zebra Conductor , P.I. Clamp For Acsr Panther Conductor , P.I. Clamp For Acsr Moose Conductor , P.I. Clamp For Acsr Moose Conductor , Twin Bushing Clamp Acsr Moose For 132/33Kv Transformer 1200Amp Without Poles , Twin Bushing Clamp Acsr Moose For 220/132Kv Transformer 1200Amp Without Poles , Isolator Jaw 1200Amp For 33Kv Isolator , Isolator Jaw 1600Amp For 132Kv Isolator , Jumpers Cone For Acsr Panther , Jumpers Cone For Acsr Zebra , Spacers For Acsr Zebra , Spacers For Acsr Moose , Spacers For Acsr Panther , Earth Wire Tension Clamp , Electrical Items And Spares , Shunt Capacitor Fuse 40A With Spring Complete Assembly , Silcagel Crystal Size 8- 8 Mesh , Silcagel Breather Box 10Kg , Aluminium Tape , Petroleum Jelly , Grease , Distilled Water , Diesel , Transformer Oil (From Govt. Psus Only) , Welding Electrodes Swg 8No As Per Is: 814 Of 2004 , Welding Electrodes Swg 10No As Per Is: 814 Of 2004 , Search Light With 300-500Mtr. Focus Make Flash, Equivalent Etc , Led Flood Light Complete 90/100Watt (Philips, Syska,Havells, Crompton, Bajaj Make) , Led Flood Light Complete 140/150Watt (Philips, Syska,Havells, Crompton, Bajaj Make) , Led Flood Light Complete 1900/200Watt (Philips, Syska,Havells, Crompton, Bajaj Make) , Led Street Light Fitting 190/200Watt (Philips, Syska,Havells, Crompton, Bajaj Make) , Led Lamp 9 Watt(Philips, Havells, Crompton, Bajaj/Reputed Make) , Led Lamp 15 Watt (Philips, Havells, Crompton, Bajaj /Reputed Make) , Led Lamp18 Watt (Philips, Havells, Crompton, Bajaj /Reputed Make) , Led Lamp45 Watt (Philips, Havells, Crompton, Bajaj/Reputed Make) , Lamp Holderpendant/Angular(Anchor,Havells,L&T,Philips/Reputedmake) , Led Tube 4 Pin18 Watt (Philips, Havells, Crompton, Bajaj/Reputed Make) , Mcb 5-10 Amp Two Pole (Havells, Anchor,Standard, Hpl) , Mcb 10-16 Amp Two Pole (Havells,Anchor,Standard, Hpl) , Mcb 10-16 Amp Four Pole(Havells,Anchor,Standard, Hpl) , Mcb 32 Amp Four Pole(Havells,Anchor,Standard, Hpl) , Mcb 63 Amp Four Pole(Havells,Anchor,Standard, Hpl) , Mccb 100 Amp, 4 Pole, Ics= 100% Icu (Havells, Standard, L&T) , Mccb 200Amp,4Pole,Ics=100% Icu(Havelles,Standard,L&T) , Main Iron Clad Switch Tpn 415V,400A , Rubber Mat 1Mtr X2mtr= 12Mm Thick , Cable Ferrules A To Z And 0 To 9 , Single Core 300Sq Mm 33Kv Heat Shrinkable Cable Kit Outdoor Type Likely Make M Seal, Powertech, H-Seal, Universal Etc , Single Core 300Sq Mm 33Kv Heat Shrinkable Cable Kit Indoor Type Likely Make M Seal, Powertech, H-Seal, Universal Etc , Copper Mesh (30Cmx5cm) , Copper Wire 8Swg , Copper Thimbles 8Mm , Copper Thimbles 10Mm , Copper Thimbles 12Mm , Starter 36Watts , Tube Four Pin 36 Watts , Choke 36Watts , Rubberized Cork Sheet6mm , Rubberized Cork Sheet10mm , O-Rings For Bushings/Inspection Plates Of Transformer 5Mm-10Mm Diameter , Rubber Sealings For Marshalling Kiosks/Control & Relay Panels , Cooling Fans Of 3 Phase 50Mva , 33Kv Vaccum Interrupter Suitable For 33Kv Vcb Of Bhel,Abb,Gec Alstom,Seimens,Megawin, S&S Make , Thermal Overload Relay Seimens Make With Range 0.8-1.2 Amp , Thermal Overload Relay Seimens Make With Range 1.2A-2.5 Amp , Thermal Overload Relay Seimens Make Of 4A Max With Range 0.1-1Amp And 1.5A-1.2A , Mn2 Thermal Overload Relay With Start And Off/Reset Relay Of Range 0.9-1.5A L&T Make , Relay 500V,2A, Fuse 6Amp. Mn2 Make L&T , Relay 415V,3.2-5A,Class 10Amn2 Makesiemens 3Ua50 00-1F , Relay 415V,Lth=10A,Le=4Amn-A1 Make L&T , Dc Change Over Relay Dcco, Make Abbrxme-1-Rk221-052-Annrk711004 , Dc1 Supervision Make Abb Tsr-In352 , Anti Pumping Relay Make Schrack/Abb Or Equi , Auxillary Relay, Voltage Selection Relay 75A, Rxpsu14n-Imyn563646-Dau, Aux Voltage:110V Dc, Case Size:2S 12C, Contacts:13No+1Nc, Reset Type:Electrical, Flag:Yes, Make Abb , Auxillary Relay, Tc-1 Supervision Relay195, 7Pj1321-5Aa210aa0, Aux Voltage:24-23V Dc, Contacts:2C/O, Reset Type:Self Make Siemens , Numerical Relay, Dir. O/C & E/F Protection Relay67/67N 7Sj6611-5Eb90-1Fgo-Lor, Aux Supply:110/250V Dc, Case Size:1/3 19,16 Bi, 7 Bo,1 Life Contact,4*I, 4*U,Ct:1A, Vt:110V/220V,50Hz, Iec61850, 100 Mbit Ethernet, Electrical, Double, Rj45-Connector Make Siemens , Thermostat Make Apt/Veilco/Eq , Auxiliary Air Break Contactor Of Ac2/Ac3 Duty Cyclenumber Of Poles 03, Voltage 415V, Amp 0-2 A, Contacts 2No+2Nc,Make Siemens , Magnetic Control Contactormakeandrew Yulepower 44W Volt110v Dc Ith10ais 13947Iec947 , Contactor 415V, 12Amp Lth 10Amp,Le 4Amp Mnx12 Make L&T , Contactor 415V, 12Amp Lth 10Amp,Le 4Amp Mna1 Make L&T , Contactor 415V, 20Amp 3Tf31 01-0A Make Siemens , Contactor 415V, 9Amp Lth 10Amp,Le 4Amp Mnx9 Make L&T , Auxillary Contactor 3Th3022-0B-F4, Aux Supply:110V Dc, Contacts:20O-2Nc 89Ax Make Siemens , Cooling Fans3 Phase Motor,415V,560Watt,900Rpm,0.9Amp/1Amp(Size 600Mm) , Cooling Fans3 Phase Motor,415V,700Watt,550Rpm,1.5Amp(Size 600Mm) , Digital Oti 90-250V Ac/Dc, Range 0-150Degree Make Precimeasure Control Banglore , Digital Wti Meter Make Precimeasure Control Banglore , Megawatt Meter , Digital Megawatt Meter, Bezel Size: 96*96Mm, 4-1/2 Digits, Aux Supply:110V Dc, Accuracy:0.5,Ctr:1200:800-400/1A Ptr:33Kv/110V Make Ae , Mvar Meter Digital Mvar Meter, Bezel Size:96*96Mm, 4-1/2 Digits, Aux Supply: 110V Dc, Accuracy:0.5, Ctr:1200-800-400/1A Ptr:33Kv/110V Make Ae , Ammeter Digital Ammeter, Bezel Size:96*96Mm, Aux Supply:110V Dc, Accuracy: 0.5, Range:1200-800-400/1A, Inbuilt Selector Switch Make Ae , Selector Control Switch Er Make 1224 Swiso , Digital Ac Ammeter,Makeae Digital 4, Range 0-600A, Ct Ratio 600/1A, Size 130X130 Mm. , Electronic Hooter, Aux. Supply 110V Dc, Freq. 48-63 Hz, O/P95-105 Db Size 96X96x82 Mm. , Lubricator Make Sae80w/90 Type Oil , Glass Sleeves , Transformer Oil Sampling Bottle , Transformer Oil Sampling Syringe (Min. 100Ml) , Crc Bottle , Teflon Tape , Single Core 63Sq Mm 33Kv Heat Shrinkable Cable Kit Outdoor Type Likely Make M Seal, Powertech, H-Seal, Universal Etc , Single Core 63Sq Mm 33Kv Heat Shrinkable Cable Kit Indoor Type Likely Make M Seal, Powertech, H-Seal, Universal Etc , Fan Contactor Seimens Ice 158.1 Auxiliary Contactor 2No+2Nc & 4No+ 4Nc , Seimens 3Ta6702 2 To 10A, Auxilairy Contactor 3No+2Nc,Cs3-P Iec947 En60947 V=6Kv Ac-1 690V-1A Ac-15 , Solder Flux , Single Core 300Sq Mm 33 Kv Voltage Grade,Al Conductor, Pvc Insulated, Sheathed, Armoured, Xlpe Cable Likely Make Havelles Etc , Pvc Unarmoured Copper Control Cable 2.5Mm Sq 2 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 2 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 4 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 6 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 8 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 10 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 12 Core , Pvc Armoured Copper Control Cable 2.5Mm Sq 16 Core , Pvc Copper Wire 1 Mmsq , Pvc Copper Wire 1.5 Sqmm , Pvc Copper Wire 2 Sqmm , Pvc Copper Wire 4 Sqmm , Pvc Copper Wire 6 Sqmm , Switch 5A , Switch 15A , Socket 5 Pin, 5A , Socket15 Pin, 5A , Fan Regulator 10A , Dp Switch 32A , Pvc Tape Roll , Indicating Pygmy Lamp 220V/110V Dc, Pin Type / Screw Type , Semaphore Indicator For Isolator S89a Ntc12, Aux Supply:110V Dc, With 3Kohm, 6W External Resistor Make Dav , Push-Button & Indicating Lamp For Ann. Accept 3Sb50 00-0Ab01+ 3Sb54 00-0A, Normal Actuator With Plastic Front Ring And Black Holder Contact (1N0+1Nc) , Auxillary Switch 8No+ 8Nc Make Shirka/Shubhada/Eq , Local Remote Switch Make Shirka/Switron/Kaycee , Rotary Switch, Local Remote Switch 8 Ways, Handle:Pistol Grip, Position:Local/Remote, Stay Put, (Local-4Ways, Remote-4 Ways), 25A; Lockable Type, Bezel Size:75 Sq.Mm , Limit Switch 3Se3 023-0A, Contacts:1No+2Nc Make Siemens , Control Switch Bcs 3 Position ,Pistol Grip 16 Ways Make Switron , Control Switch Bcs 3 Position ,Pistol Grip 20 Ways Make Switron , 3 Core 95 Sq Mm 11Kv Xlpe Cable , Sf-6Gas Cylinder Of 9Kg , Sf-6Gas Cylinder Of 11Kg , Nitrogen Cylinderof 16Kg Containing 9Kg Gas , O2 Cylinder Refilling , Anti Rodent Device , Control Switch For Panelsreputed Make , Hrc Fuse 2Amps , Hrc Fuse 4Amps , Hrc Fuse 6Amps , Hrc Fuse 10Amps , Hrc Fuse 10Amps , Hrc Fuse 32Amps , Hrc Fuse 32Amps , Hrc Fuse 100Amps , Fuse 3Nw20nnsf+3Nwns10, Aux Voltage:110V Dc, Rating:10A Make Siemens , Fuse 3Nw20nnsf+3Nwns4, Aux Voltage:110V Dc, Rating:10A Make Siemens , 33Kv Phase Limbof 33Kv Circuit Breaker (Abb Make) , Breather Box For 133.33 Mva/160 Mva/150Mva, 220/132 Kv Transformer (Bhel/Abb Make) , Breather Box For 50 Mva,132/33 Kv Power Transformer (Bhel/Cgl/Ece/Emco Make) , Numerical O/C And E/F Relay Make:Easun Reyrolle , Model: Mit 114,Poles:4No,Volt: 43-280V Dc,Amp:1A , Numerical Differential Relay For Power Transformer Protection Make Ashida,Er/Reputed Make , Master Trip Relay B24,110/125 V Dc Make Er/Reputed , Master Trip Relay B24,220 V Dc Make Er/Reputed , Master Trip Relay 86, Rxmvb2-1Myn563035-Ad Make Abb , Trip Relay Supervision Relay 95 Tsr-1N352-001-As, Make Abb , 33Kv Voltage Grade, 3 Phase, 4 Wire Digital Trivector Energy Meter.. Volt:33Kv/V3/110V/V3 , Frequency:50Hz, Rating: -/1A,Accuracy Class: 0.2S, Standard: Is 14697, Iec 62053-22 , 66Kv Kv Voltage Grade, 3 Phase, 4 Wire Digital Trivector Energy Meter.. Volt 66Kv/V3/110V/V3 , Frequency:50Hz, Rating: -/1A , 132 Kv Voltage Grade, 3 Phase, 4 Wire Digital Trivector Energy Meter.. Volt 132Kv/V3/110V/V3 , Frequency:50Hz, Rating: -/1A,Accuracy Class: 0.2S, Standard: Is 14697, Iec 62053-22 , 220 Kv Voltage Grade, 3 Phase, 4 Wire Digital Trivector Energy Meter.. Volt : 220Kv/V3/110V/V3 , Frequency:50Hz, Rating: -/1A,Accuracy Class: 0.2S, Standard: Is 14697, Iec 62053-22 , 2 Pole Heavy Duty Rotary Switch With “Off” 5Amp Make “Key Cee” Equivalent Etc For C&R Panel , Shunt Tripping/Closing Coil 110V/220V Dc, Suitable For 33Kv Vcb Of Bhel, Abb,Megawin, Alstom, Siemens, S&S, Cgl & Aluminum Industries Ltd.Make,Equivalent Make Etc , Shunt Tripping/Closing Coil 110V/220V Dc,Suitable For 66Kv Sf6 Of Bhel, Abb,Megawin, Alstom, Siemens, S&S, Cgl & Aluminum Industries Ltd.Make,Equivalent Make , Spring/Charging/Closingcoil 220V/110V Dc, Suitable For 33Kv Vcb Bhel, Abb,Megawin, Alstom, Siemens, S&S, Cgl & Aluminum Industries Ltd.Make , Shunt Tripping/Closing Coil 220V Dc(Make Jyoti) ,Suitable For 33 Vcb Ofabb Make , Shunt Tripping/Closing Coil 220V Dc(Make Jyoti) ,Suitable For 132 Sf6 Ofabb Make , Tnc Switch 220V Dc 4Ways , Tnc Switch 220V Dc 8Ways , Tnc Switch 220V Dc 12Ways , Vrla Battery 12V,80/160Ah Along With Charger , Space Heater Sh100w240, Rating:100W 240V Ac Make Apt Control , Resistor Unit For Master Trip Relay 86 Rxtma-1Nrk711004-Aa Make Abb , Geared Motor For 100-130V Dc/Ac 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Geared Motor For 220-250V Dc For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Geared Motor For 220-250V Ac For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Spring Charge Motor 230V Ac/Dc , 1.8A, Type Sg105, Insulation Class B, Rpm 60For 36Kv Vcb Make Agni/Shreem/Reputed Make , Spring Charge Motor 230V Ac/Dcfor 36 Kv Megawin Circuit Breaker Type Msp36 , Spring Charge Motor 230V Ac/Dc 2.5Afor 132 Kv Sf6 Circuit Breaker (Siemens Make) , Auxilliary Contactor110v Dcfor 36 Kv Megawin Circuit Breaker Type Msp36 , Operating Coil 24V Dc Mo For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Vd4 Mo Opening Coil 48V Dc For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Open Coil Mo1(110V-132V Dc) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Open Coil Mo1(220-250V Dc/220V-250V Ac) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Shunt Closing Release-Mc 24V Dc For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Vd4 Mc Closing Coil(48V Ac-Dc) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mc Closing Coil(110-132V Dc) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mc Closing Coil(220-250V Dc/220-250V Ac) For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mu Coil Assembly 24V Dc Undervoltage For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mu Coil Assembly 48V Ac- Dc Undervoltage For 36Kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mu Coil Assembly(110-132V Dc/110-127V Ac) Undervoltage For36kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Vd4 Mu Coil Assembly(220-250V Dc/220-250V Ac) For36kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mo2 Assembly 24Vcc Additional Trip For36kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mo2 Assembly(48Vca-Vcc) Additional Trip For36kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mo2 Assembly(110-127Vca/110-132Vcc) Additional Trip For36kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Mo2 Assembly 220-250Vca/220-250Vcc) Additional Trip For36kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Shock Absorber Assembly For36kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , Acsr Zebra Conductor , Acsr Panther Conductor , Acsr Moose Conductor , El3 Drive Complete(Operating Mechanism) For36kv Vcb Type Ovb-Vbf 36.16.25 Make Abb , T&P Items And Safety Equipments , Turn Table For Acsr Panther/Zebra Conductor With Capacity Of 3Mt Made Of Mild Steel With Double Ball Bearing Likely Makes Pee, Zi, Honeywell, Burma Etc , Four Sheeve Pulley Steel Frame Forged Swivel Hookwith Capacity Of 5Mt As Per Is 8610 Pulley Material And Ball Bearing Of Gun Metal Bush With Open Type Pulley Isi Mark Suitable For 12Mm Steel Rope , Bolted Type Come Along Clamp Suitable For Aaac/Panther Conductor 37/3.15Mm With Al Alloy Clamp And Groove Inside For Conductor Gripping. Hook And Eye Bolt Of Galvanized Carbon Steel, Locking Bolts Made Of High Tensile Steel Is: 2121 Tension Limits = 2495Kg Likely Makes Pee, Zi, Honeywell, Burma Etc , Bolted Type Come Along Clamp Suitable For Aaac/Panther Conductor 37/2.88 Mm With Al Alloy Clamp And Groove Inside For Conductor Gripping. Hook And Eye Bolt Of Galvanized Carbon Steel, Locking Bolts Made Of High Tensile Steel Is: 2121 Tension Limits = 2495Kg Likely Makes Pee, Zi, Honeywell, Burma Etc , Bolted Type Come Along Clamp Suitable For Zebra Conductor 54/7/3.18Mm With Al Alloy Clamp And Groove Inside For Conductor Gripping. Hook And Eye Bolt Of Galvanized Carbon Steel, Locking Bolts Made Of High Tensile Steel Is: 2121 Tension Limits = 2495Kg Likely Makes Pee, Zi, Honeywell, Burma Etc , Bolted Type Come Along Clamp For Earth Wire Size 7/3.66Mm Groove According To Size Of Earth Wire Bolts Of High Tensile Steellikely Makes Pee, Zi, Honeywell, Burma Etc , Snatch Galvanized Pulley Size 6” Dia Pulley On Ball Bearing/Gun Metal Bush With Swivel Hook Open Type With Side Locking Suitable For Use In Trans Line Stringing. , Al Alloy Snatch Roller Pulley Size 8”Dia Pulley On Ball Bearing/Gun Metal Bush With Swivel Hook Open Type With Side Locking Suitable For Use In Trans Line Stringinglikely Makes Pee, Zi, Honeywell, Burma Etc , Snatch Roller Pulley Size 6”Dia Pulley On Ball Bearing/Gun Metal Bush With Swivel Hook Open Type With Side Locking Suitable For Use In Earthwire Stringinglikely Makes Pee, Zi, Honeywell, Burma Etc , Tool Kit , D-Shackle Heavy Duty , Chain Block Pulley Heavy Duty 5 Ton , Avo Meter Likely Make Motwani, Waco, Riken Etc , Hook On Meter Likely Make Motwani, Waco, Riken Etc , Insulating Hand Glovesmake Crystal Etc Tested For 220 Kv, 132 Kv , 33Kv Level , Safety Helmet Isi Marked , Safety Belt Isi Marked , Safety Vest Isi Marked , Rain Coat Of Duck Back Make Etc , Safety Shoes Of Reputed Make Etc , Fixed Piller Drill Machine 40Mm , Polypropylene Rope ½’, ¾’& 1’ / Garware Make , Manila Rope ¾’ & 1’ Dia , Steel Wire Rope Sling 16Mm Dia Isi Make 2 Mtr. Long Heavy Duty , Steel Wire Rope Sling 16Mm Dia Isi Make 5 Mtr. Long Heavy Duty , Steel Wire Rope Sling 16Mm Dia Isi Make 10 Mtr. Long Heavy Duty , Steel Wire Rope Of Dia 16 Mm , Steel Wire Rope Of Dia 10/12 Mm , Discharge Rod Suitable (Complete With Connecting Lead & Clamp) For 220Kv Voltage Level , Discharge Rod Suitable (Complete With Connecting Lead & Clamp) For 132Kv Voltage Level , Discharge Rod Suitable (Complete With Connecting Lead & Clamp) For 33Kv Voltage Level , Hydraulic Conductor Cutter , Hydraulic Compressor Manually Operated For Jointing Aaac/Acsr Conductor With Operating Handle Pressure Gauge, Tools Accessories Kit And Weather Proof Cover For Protection.Capacity: 100 Ton, Make: Techo Scient/Reputed Make. , Hydraulic Compressor Motorisedfor Jointing Aaac/Acsr Conductor With Operating Handle Pressure Gauge, Tools Accessories Kit And Weather Proof Cover For Protection.Capacity: 100 Ton, Make: Techo Scient/Reputed Make. , Compressor Die Sets Suitable For Above Hydraulic Compressors , Drum Lifting Jack Mechanical 3 Ton Capacity , Single Sheeve Pulley Both Open And Close 5 Ton Capacity , Double Sheeve Pulley 5 Ton Capacity , Three Sheeve Pulley , Petrol Chain Saw Cutter , Earthing Roller , Equilizer Pulleys 10 Ton , Earth Wire Pulley , Single Sheeve Roller Aluminium, Rubberized Dia 300/400 Mm , Single Sheeve Roller Aluminium,Dia 450/600 Mm , Twin Aerial Roller, 150Mm (Rubberized) Aluminium , Twin Aerial Roller, 150Mm (Rubberized) Nylon (P.P) , Patta Clamp , Kitto Clamp , Turn Buckle Capacity 5 Ton , Joint Proctector For Various Conductors , Sagging Winch Machine 10 Ton , Single End Socks , Double End Socks , Earth Wire Socks , Power Winch Machine 5 Mt , Sag Plate , Single Pulley 150Mm Dia (Aluminiun/ P.P) , Automatic Clamp For Conductor/ Opgw , Crow Bar, 30Mm To 32 Mm , Derrick Pole, S-Type Roller , Air Compressor With Ac Single Phase Air Cooled 12 Cfm Compressor And Tank Pressure 100 Psi Make Maxair/Reputed Make , Paint Spray Gun 45Psi , Old Cotton Saree , Digital Mutltimeter (Mutli Functional Meter) , Military Grade Binocular (Reputed Make) Magnification Between 7X To 12 X And Objective Lense Diameter , Axe/Sickle , Professionalchain Saw 58Cc, 20 Inches, 3.75 Hp , Brush Cutting Machine Heavy Duty (Reputed Make) , Fire Fighting Equipments/ Electrical Equipments , Refilling Of Dry Powder 10Kg(Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Dry Powder 15Kg(Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Dry Powder 25Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Dry Powder 50Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Abc Type 2Kg(Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Abc Type 5Kg (Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Abc Type 10Kg(Make Freeze Fire,K V Lite /Reputed Make) , Refilling Of Mechanical Foam Type 50 Ltrs(Make Freeze Fire/Reputed Make) , Refilling Of Co2 Type 4.5 Kg , Refilling Of Co2 Type 10 Kg , Refilling Of Co2 Type 12.2 Kg , Refilling Of Co2 Type 22.5Kg , Hose Pipe For Dcp 10 Kg , Hose Pipe For Dcp 25 Kg , Hose Pipe For Dcp 50 Kg , Hose Pipe For Abc 2 Kg , Hose Pipe For Abc 5 Kg , Hose Pipe For Abc 10 Kg , Hose Pipe For Mechanical Foam Type 50 Ltrs. , Hose Pipe For Co2 4.5 Kg , Hose Pipe For Co2 22.5 Kg , Wheel Set For Dcp 25 Kg , Wheel Set For Dcp Co222.5 Kg , Wheel Set For Dcp/Mechanical Foam 50 Kg , Union Cap For Dcp 10Kg , Union Cap For Dcp 25Kg , Union Cap For Dcp 50Kg , Dry Powder Fire Extinguisher 25 Kg Trolly Mounted Filled With Bc Dry Powder Fitted With Hose Pipe/ Nozzle Is No: 10658 Used Onb & C Class Of Firemake Cease Fire,Savemax,Reputed Make , Abc Stored Pressure Multipurpose Type Fire Extinguisher 6Kg Wall Mountedfilled With Map Mono Ammonium Phosphatepowder 90% Complete With Hose Pipe/ Nozzle Is No: 14609 Used On A, B & C Class Of Firemake Cease Fire,Savemax,Reputed Make , Abc Stored Pressure Multipurpose Type Fire Extinguisher 9Kg Wall Mounted Filled With Map Mono Ammonium Phosphatepowder 90% Complete With Hose Pipe/ Nozzle Is No: 14609 Used On A, B & C Class Of Firemake Cease Fire,Savemax,Reputed Make , Carbon Dioxidetype Fire Extinguishers Seamless 4.5 Capacity Wheel Type Fitted With Isi Marked Value, Hose/Horn Filled With Co2 Gas Applicable On Class B,C Fires Is 15683 Make Cease Fire,Savemax,Reputed Make , Mechanical Foam 50 Ltrs. Fire Extinguishertrolly Mounted Filled With Afff Concentrate Fitted With Hose Pipe/ Nozzle Is No: 13386 Used On A & B Class Of Fire Make Cease Fire,Savemax,Reputed Make , 33Kv Post Insulators Solid Core Type, Power Frequency Withstand Voltage 95Kvp Dry Lightning Impulse Withstand Voltage ± 170 (Kvp) , 132Kv Post Insulators Solid Core Type, Power Frequency Withstand Voltage 275Kvp Dry Lightning Impulse Withstand Voltage ± 650 (Kvp) , Single Phase245 Kv 50 C/S, Outdoor Metal Oxide Gapless Type, 120Kv (Rms) Surge Arrestor Including Surge Counters/Monitors, Insulating Base All Associated Accessories, Auxiliaries. , Single Phase145 Kv 50 C/S, Outdoor Metal Oxide Gapless Type, 120Kv (Rms) Surge Arrestor Including Surge Counters/Monitors, Insulating Base All Associated Accessories, Auxiliaries. , Single Phase36 Kv 50 C/S, Outdoor Metal Oxide Gapless Type, 120Kv (Rms) Surge Arrestor Including Surge Counters/Monitors, Insulating Base All Associated Accessories, Auxiliaries. , Single Phase, 50 C/S 245Kv Current Transformers (900-600-300/1-1-1-1-1 A Or As Per Site Specifications), 40 Ka For One Second, Rated Dynamic Current 100Ka(Peak), Class A Insulation, Burden 20 Va , Single Phase, 50 C/S 145Kv Current Transformers (900-600-300/1-1-1-1-1 A Or As Per Site Specifications), 31.5Ka For One Second, Rated Dynamic Current 100Ka(Peak), Class A Insulation, Burden 20 Va , Single Phase, 50 C/S 132Kv Capacitor Voltage Transformers (132/V3) Kv/(110/V3)V, One Min Power Freq Withstand 275Kvrms , Single Phase, 50 C/S 36Kv Current Transformers (1200-600-300 /1-1-1 A Or As Per Site Specifications) , 25Ka For One Second, Rated Dynamic Current 25Ka(Peak), Class A Insulation, Burden 20 Va , Single Phase, 50 C/S Outdoor 33Kv Pt (33/V3) Kv/ (110/V3)V With Highest System Voltage36kv, One Min Power Freq Withstand 70Kvrms , Single Phase, 50 C/S Outdoor 132Kv Pt (132/V3) Kv/ (110/V3)V With Highest System Voltage145kv, One Min Power Freq Withstand 275Kvrms , Single Phase, 50 C/S Outdoor 220Kv Pt (220/V3) Kv/ (220/V3)V With Highest System Voltage 245Kv, One Min Power Freq Withstand 460Kvrms , Rotating Ctv Network Ip Ir Night Vision Speed Dome Cameras (360 Degree) Along With Cables & All Necessary Acccessories. , All-In-One Desktop (8Gb Ram, 512Gb, I5 Processor,Latest Operating System , Portable Oil Filteration Plant , Marshalling Kiosk With Kiosk Frames Mild Steel Structural Sections For Pressed And Shaped Cold-Rolled Sheet Steel, Thickness Not Less Than 2.0Mm. Frames Shall Be Enclosed In Cold-Rolled Sheet Steel Of Thickness Not Less Than 1.6 Mm. Doors And Covers Shall Also Be Cold Rolled Sheet Steel Of Thickness Not Less Than 1.6 Mm. Complete Structures Shall Be Rigid, Self Supporting, Free From Flows, Twists And Bends. Dust And Vermin Proof Construction And Shall Be Provided With A Degree Of Protection Of Ip: 55, With Copper Bar Earthing. Finishing Paint On Panels Shall Be Of Shade 692 (Smoke Grey) Of Is: 5. The Inside Shall Be Properly Stoved. The Paint Thickness Shall Be At Least 50 Microns , Log Books , Ptw , Issue Register , Challan Book , Gr Books , Water Motor Pump(1Hp) , Water Tank (1000L Anti- Bacterial)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Jammu And Kashmir View Result →
48.
Health and Family Welfare #9226451 Technical Bid
Tender For supply of surgical equipment - Absorbable Gelatin Sponge Ip 66, Size 80(+-10) Mm X 50 Mm X 10 Mm Should Be Sterlized. , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set / Blood Transfusion Set • Sharp And Easy Piercing Spike Suitable For Blood Bags And Standard Blood Containers • Transparent Cylindrical Drip Chamber With Filter.Filter Size Should Be 200+20 Micrometer. • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Transfusion Rate • Should Conform To Is 9824(Part 3):1996 , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powdered,,Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards , Suction Catheter, Sterile. Size: Fg 5 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 6 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 8 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 10 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 12 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 14 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 16 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 18 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 20 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 22 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 8 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size10 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size16 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size18 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size20 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size22 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 24 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Infant Feeding Tube Size:10Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:8Fg, Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:5Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Sterile Disposable Perfusion Set With Airway And Needle (Adult Use) • For Gravity Feed Only • Sharp And Easy Piercing Spike With Air Vent • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Self Sealing Latex Bulb Which Will Also Act As An Port For Extra Medication • Efficient Roller Clamp To Control And Adjust The Fluid Rate • 21 G Needle • Should Conform To Is 12655 -4 Standard , Sterile Disposable Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use) • Burette Type Measured Volume Chamber Of 100 Ml • Drop Size Of Approx 60 Drops Per Ml • Injection Port,Latexfree, For Intermittent Medication. • Floating Auto Shut Off Valve (Latex Free) In Burette. • Soft And Kink Resistant Pvc Tubing. • Roller Controller For Flow Control • Tube Length 150 Cm • 23G Needle • Should Conform To Iso 8536-5 , Sterile Disposable Infusion Set With Microdrip (I.V.) • Microdrip Infusion Set With Drop Size Reduced To Approx 60 Drops Per Ml • Sharp And Easy Piercing Spike • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Fluid Rate • Should Conform To Is 12655 - 4 Standard , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conform To Is 12227 , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 16G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 20G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 22G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port. Size 24G • Suitable For Paediatric & Neonatal Use • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Mucus Extractor Sterile • Clear Transparent Container • Antibacterial Filter • Soft, Kink Resistant Pvc Tubing • Tube Size 10 Fg; Length 40 Cm (Min.) • Capacity 25 Ml , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Adult) • Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Pediatrics) • Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Paper Adhesive Plaster 1 X 9.0 Mts (With Cutter) Non Woven Adhesive Tape,Hypoallergic,Should Have Some Stretch Bonding , Paper Adhesive Plaster 2 X 9.0 Mts (With Cutter) Non Woven Adhesive Tape Hypoallergic, Should Have Some Stretch Bonding , Paper Adhesive Plaster 3 X 9.0 Mts (With Cutter) Non Woven Adhesive Tape Hypoallergic, Should Have Some Stretch Bonding , Plaster Of Paris Bandages 15Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Plaster Of Paris Bandages 10Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 10 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 12 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 14 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 16 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 18 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Scalp Vein Set (Disposable): Size 18G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 20G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 22G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 24G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 2 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 5 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 10 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 20 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Surgical Blade Sterile, Size 11 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 15 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 22 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Disposable Spinal Needle For Single Use 22G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Sterile Disposable Spinal Needle For Single Use 25G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Urine Collecting Bag, Disposable 2000 Ml • Transparent Sheet • Kink Resistant Flexible Tubing Not Less Than 90 Cm In Length • Should Have Non-Return Valve • Top Drainage Outlet • Graduated Bag • Moulded Handle For Easy Handling , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Endotracheal Tube, Plain - Size 2.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain With Radio-Opaque Line, Sterile, Single Use - Size 6Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 6.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Cuffed - Size 4Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 4.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 9 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack – Suiting The Shape Of Product , Tracheostomy Tube (Pvc), Plain, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line , Tracheostomy Tube (Pvc), Cuffed, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line • Balloon With Non Return Valve , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 24) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 28) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 32) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.5 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Sterilised Umbilical Cotton Tape Width 3 Mm, Length 75 Cm Should Conform To Schedule F(Iii) Of Drug And Cosmetic Act 1940 , Bone Wax Sterilised , Skin Graft Knife Blade (Sterile) (Disposable ) Skin Grafting Knife Blade (Sterile) Made Of Carbon Steel Or Stainless Steel Material 158 Mm Long Individually Wrapped In Wrapper Corrosion Inhibitor Paper In Single Packet,.In Packs Of 10. The Edge Must Be Sharp Enough To Cut The Skin In A Single Shave And Should Snugly Fit In The Handle Should Conform To Is 3759. 2. Skin Grafting Knife Handle (Watson Modification Of Humby’S Knife ) Stainless Steel, Ce Certified, In Which The Blade Specified In (A) Above Should Fit Snugly. Should Conform To 7980-1976. , K Wire, Length 375 Mm; 1Mm Length Of Wire Should Be Mentioned With Specification. Should Conform To Is 8261 , K Wire, Length 375 Mm;1.6Mm • Length Of Wire Should Be Mentioned With Specification. • Should Conform To Is 8261 , K Wire, Length 375 Mm; Size 1.8Mm • Length Of Wire Should Be Mentioned With Specification. •Should Conform To Is 8261 , Face Mask, Disposable • Should Be Manufactured From Non Woven Poly Prop Fabric • Should Be 3 Ply Construction • Should Have High Bacterial Filtration Efficiency • Should Be Heat Sealed To Keep 3 Layers Together • Standard Size 17.5 X9 Cm • Color Green/Blue • There Should Be A String Each At All Four Corners,Length Of String Should Be 40Cm • Nose Clip Should Be There • No Elastic Band. , Surgical Cap, Disposable (For Surgeons) • Should Be Manufactured From Non Woven Fabric. • Strip For Tying The Cap Stitched On The Back For Proper Grip On The Forhead. • Green Colour • Ultrasonically Stitched • Air Permeable/Breathable • Should Retain Skin And Hair Particle. • Strip For Tying The Cap , Surgical Cap, Disposable ( For Nurses) • Should Be Manufactured From Non Woven Fabric • Blue / Green Colour • Round Upon Wearing, With Elastic • Air Permeable / Breathable • Should Retain Skin And Hair Particles , Foldable Intra Ocular Lense With Injector (Size + 11 D To +17.5 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics ( 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 11 D To +17.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 18 D To + 24 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 18 D To + 24 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 24.5 D To + 28.5 D ) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 11 D To +17.5 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics – Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 11 D To +17.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 18 D To + 24 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics – Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 18 D To + 24 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 24.5 D To + 28.5 D ) 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Bioconvex 3. Iol Haptics – Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powdered,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powder Free,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Extra Small. Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Small Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Medium Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Large Should Conform To Is 15354 , Pressure Monitoring Line / High Pressure Extension Line • Suitable For High Pressure Monitoring And For Connection Between Syringe Infusion Pump And Patient • Male Luer Lock At One End And Female Luer Lock At Other End ; Should Fit All Standard Equipment. Luer Lock Connectors Should Provide Secure Fitting. • Pressure Upto 800 Psi • Length 200 Cm • Sterile , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml • Should Have Suitability For Both Male And Female Patients • Should Be Provided With Adhesive For Fixation And Good Grip With Minimal Risk Of Allergy And Injury • Capacity 100 Ml • Sterile , Umbilical Catheter (For New Born) All Sizes • Radio Opaque Line • With Female Flexible Mount • Colour Coded Connector • Open Tip Should Be Soft, Rounded, Atraumatic • Length 40 Cm , Umbilical Cord Clamp • Suitable For Clamping Umbilical Cord Of New Born • Security Lock To Prevent Accidental Opening After Clamping • Grooved Clamping Area , Absorbable Oxidized Regenerated Cellulose Net Size 2”X 3” With Surgical Sponge Topical Absorbable Haemostatic Bactericidal Property , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And “Y”Connector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 16 Fg , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And “Y”Connector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 18 Fg , Bone Cement With Antibiotics,Fast And Slow Setting , Sanitary Napkin, Beltless 1. Covering – Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler – The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc. 3. Back Strip – A Back Strip For Sticking The Sanitary Napkin Onto The Underwear Should Be There Using Good Quality Adhesive Material. 4. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Total Pad Length 210 +_ 10 230 +_ 10 Width 60 To 75 70 To 85 Thickness 8 +_ 2 5. Weight : Not More Than 10 Gm . . Instruction For Usage Should Be Mentioned On Every Packet , Sanitary Napkin, Belttype 1. Covering – Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler – The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc 3. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Pad Length 220 +_ 10 Width 70 +_ 5 Thickness 17 +_ 3 4. Weight : 12 +_ 3 Gm 5. Pack – Six Napkins In A Pack. 6. Elastic Belt With Loops Shall Be Provided In Each Pack. 7. Absorbency: The Napkin Should Be Able To Absorb Not Less Than 30 Ml Of Normal Saline Or Coloured Water Or Test Fluid When Poured On To The Centre Of The Napkin At The Rate Of 15 Ml Per Minute. .Instruction For Usage Should Be Mentioned On Every Packet. , Belt-Less Sanitary Napkin With Wings 1. Covering (Absorbing Top Sheet Corrector)–Good Quality Knitted Sleeve Or Non Woven Fabric Of Rash Free,Non Irritant And Soft To Touch Material Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet Absorbency Requirements.The Napkins Shall Have A Non Absorbent Barrier On One Side With Adhesive Covered By A Differently Identifiable Paper 2.Overall Length (Mm) 230 ± 5 3.Core Length 220 Mm± 10 4.Fluff Core/Pad Length 220 Mm± 10 5. Over All Width With Wings 160Mm+_5 6.Fluff Core/Pad Length 70 Mm± 5 7.Thickness Of A Single Pad 9-10Mm 8. Weight Of A Single Pad : 8-10 Gm 9. Pack Six Napkins In A Pack. 10Type.- Belt-Less Sanitary Napkin With Wings 11. Minimum Absorbency: 50Ml 12.Ph Value Of Absorbent Material 6-8.5 B. Disposable Individual Pouch Or Wrapper For Each Sanitary Napkin(As Per Ministry Of Environment,Forest And Climate Change Dated 08.04.2016) Pouch/Wrapper Specifications :- 1. Pouch/Wrapper Should Be Of The Size Of Sanitary Napkin Being Supplied. 2. It Should Have Adhesive To Seal The Sanitary Napkins Within. 3. Pouch/Wrapper Should Not Be Transparent. Note : Instructions For Use Of Disposable Pouch/Wrapper Mst Be Written In Hindi On Disposable Pouch/Wrapper. Blrseky Fd;S Gq;S Lsusvjh Usifdu Dks Eksm Dj Disposable Pouch/Wrapper Esa Mkys ,Oa Disposable Pouch/Wrapper Dks Xksan Yxh Iv~Vh Ls Cun Dj Lqjf{Kr Rjhds Ls Dwmsnku Esa Mkysaa , Oxygen Mask (Adult) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. , Oxygen Mask (Paediatric) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. • Mask Connector 4M , Sterile Catheter, Single Use, For Urinary Drainage(Foley Baloon Catheter), 2 Way, Size 14 • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For A Traumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30+- 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Ballon Capacity Should Be Mentioned As Per Is 11497 • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 , Nelaton - Catheter Size 14 Fg Distal End Is Close And Proximal End Has Female Colour Code Connector • Soft, Kink Resistant Medical Grade Pvc Tube • Length:40 Cm • Individually Packed In Poly And Sterile , Surgical Blade Sterile, Size 23 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Urethral Catheter 90 (Fg-14), Made Up Of Medical Grade Pvc , Urethral Catheter 91 (Fg-10), Made Up Of Medical Grade Pvc , Vaccum Suction Set, 2.5 Meter Length, •Suction Handle With Suction Tube •Sterile,• Pyrogenic Free, •Latex Free,• Single Use , Epidural Minipack 18G, 90 Mm, Metal Stylet For Single Use Only, •Sterile, •Epidural Catheter 20G, L 90 Cm, •6 Lateral Holes Closed End, •Borst Adapter •Epidural Catheter Flat Filter 0.2 Micro Meter •Thread Assist Guide•Lor (Loss Of Resistance) Plastic Syringe 6 Ml , Vascular Catheter With Metal Guide No. 16, Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 30 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 16 Double Lumen Size 45 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 18 Double Lumen Size 45 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 20 Double Lumen Size 45 Cm (Longline Iv.) , Vascular Catheter With Metal Guide No. 22 Double Lumen Size 45 Cm (Longline Iv.) , 3 Way Stop Cock , Non Pyrogenic & Single Use, Should Be Leak Proof, With Smooth Movements , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 10 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 50 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 100 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 150 Cm (Non Pyrogenic & Single Use) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) • Graduated Bag, • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube , Elastic Adhesive Bandage Bp 1M X 10Cm Adhesive Material Should Have Good Quality Sticking Property, Non-Allergic , Sterile Disposable (Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G · Should Be Packed In Transparent Single Blister Pack · Should Confirm To Is 10555 Standard · (Neonatal Iv Cannula Size 26) , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Paediatric · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads In Small Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear · Should Be Single Use With Bronchoscopy And Co2 &O2 Port With Chin Support · Non Allergic, Leak Proof, Contour Should Be Maintained , Nebulization Mask Adult , Nebulization Mask Paediatric , Chemotherapy Port &Non-Coring Needles(Adult) · Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Port With Small Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 8Fr With Silicon Material With Peel Apart Percutaneous Introducer System. · Chemo Port Huber Needle 20G And 22G. , Chemotherapy Port &Non-Coring Needles(Pediatric) Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Power Port With Large Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 6Fr With Silicon Material With Peel Apart Percutaneous Introducer System Chemo Port Huber Needle 20G And 22G. , Core Biopsy Instrument With Compatible Co-Axial Needle (Automatic Disposable) , Bone Marrow Biospy Needle , Eyelid Occlusion Dressings Use For Eyelid , Eye Pressure Shield , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (3/8 Cir Rb Needle 40Mm Length 76 Cm) Size 1/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 20Mm Length 76 Cm) Size 3/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) Size 2/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) Size 1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 40Mm Length 76 Cm) Size 1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (3/8 Rb Needle 30Mm Length 76 Cm) Size 2/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size 1 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle 20Mm Length 70 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length 90 Cm Size 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length75- 90 Cm Size 1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Tapercut Needle (Heavy) 35-40Mm Length 75-90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle40mm Length 90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Conventional 25Mm Length 90 Cm)Undyed Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 20Mm Length 70 Cm) Size 4/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide ) (1/2 Cir Rb Needle 40Mm Length 90 Cm Size 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 40Mm Length 90 Cm) Size 1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting Needle 22Mm Length 45 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting 16Mm Needle, Suture Length 70Cm Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (1/2 Cir Rb Needle 20Mm, Length 76 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) Size 8/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 16 Mm Length 70 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 40-45Mm Length 60-70 Cm.) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.) Size 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Arm Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16Mm Needle,Length 90 Cm) Size 6/0 , Non Absorbable Surgical Suture,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb Double 8Mm Needle, Length 60 Cm) Size 7/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16 Mm Needle, Length 70 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm Length 90 Cm) Size 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy Needle 40-45Mm Length 75-90 Cm) Size 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle Cutting Size 16-17Mm Length 70-90 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle 17Mm Length 70-90 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Arm Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue Usp(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm) Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Arm Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 16 Mm Length 70 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Cutting Needle 25Mm Length 45 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) Size 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (L/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) Size 1 , Non Absorbable Surgical Suture, ,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) Size 8/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut 13Mm Double Needle 70Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Cc 13Mm Needle, Suture Length Of 70Cm) Double Arm Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Arm Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green/ Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided White (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green / Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) 1/2 Circle Taper Cut , 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm Size 2/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) *With 1/2 Circle Taper Cut , 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With 1/2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm Size 3/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglecaprone, Monofilament Sutures (1/2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm) Size 2/0 , Absorbable Surgical Sutures Polyglecaprone, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 26Mm, Suture Length 70Cm) Size 3/0 , Absorbable Surgical Sutures Monofilament Sutures Polyglecaprone /Polyglyconate (L/2 Circle Cutting 16Mm Needle,Suture Length 70Cm) Size 4/0 , Absorbable Surgical Sutures Polyglecaprone / Polyglyconate, Monofilament Sutures (3/8 Circle Cutting24- 26Mm Needle, Suture Length Of 70-90Cm) Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Reverse Cutting 40-50 Mm Length 70- 90Cm) Size 1 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 31Mm Needle, Length 70Cm) Size 2/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 30Mm Needle, Length 70Cm) Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm/ Size 1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm/ Size 2/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm/ Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet) 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm Size 10/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 16Mm, Length 76 Cm) Size 5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Cutting Needle 8Mm, Length 35 Cm) Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 20Mm, Length 76 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 16Mm, Length 76 Cm) Size 5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 19Mm Length 76 Cm) Size 4/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglyconate, Monofilament Sutures (1/2 Circle Oval Rb Needle 26-30Mm Needle, Suture Length Of 70Cm) Size 2/0 , Absorbable Surgical Suture Polyglyconate, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 20-26Mm, Suture Length 70Cm) Size 3/0 , Nonabsorbable Polypropylene Light Weight Macroporous Mesh , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial Medial , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial Medial , Absorbable 5 Mm Hernia Mesh Fixation Device 30 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4.1 Mm Length Along With Flexible Shaft Up To 3 Cm. , Absorbable 5 Mm Hernia Mesh Fixation Device 15 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4.1 Mm Length Along With Flexible Shaft Up To 3 Cm. , Non Absorbable 5 Mm Hernia Mesh Fixation Device With 30 Helical Shaped Titanium Tacks 3.96Mm Width And 0.61 Mm Diameter , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Linear Cutter 55Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Linear Cutter 75Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Universal Linear Cutter Cartridge 75Mm Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 75Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology. , Universal Linear Cutter Cartridge 55Mm For Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 55Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology. , Curved Cutter Stapler 40 Mm Linear Cutter Simultaneous Cutting And Stapling , Curved Green Cartridge Having Close Staple Height Of 2.0 Mm, Tactile Feedback On Completion Of Firing Sequence, New Anvil, Knife With Every Catridge , Laparoscopic Cartridge For Stapler 60 Mm Blue, 1.5 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Laparoscopic Cartridge For Stapler 60 Mm Green, 2.0 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Pph Stapler 33Mm - Hemorrhoidal Stapler Kit Consists Of 33Mm Hemorrhoidal Circular Stapler (With Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm – 1.5 Mm, Staple Open Leg Length Of 5.5 Mm), Suture Threader, Circular Anal Dilator, Purse-String Suture Anoscope, Suture For Purse String. , Optically Guided Bladeless Trocar 12Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Optically Guided Bladeless Trocar 12 Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer Length 100Mm. , Facial Closure Device Contain - Optical Bladeless Trocar With Facial Closure Device Comaptible With Clear Cannula Have Two Side Opening Meant For Uniform Port Closure , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Varied Staple Height Reloads/Cartridges For 80 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 60 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 60 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Eea Circular Stapler Purple Colour Medium Thick , Triple Row With Tristaple Technology (Three Row Of Staple Inner To Outer Row 3.0,3.5 And 4.0 Mm With Sloped Cartridges Face In One Stapler) Diameter 31Mm , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 80 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 80 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Wound Protector With Double Ring In Medium 5-9 Cm , Endo Catch Specimen Removal Kit:With Continuous Ring ,Polyurethane Pouch With 34.5 Cm Shaft Length , 10Mm With Leakproof And Impervious Material To Cancer Cells Of 0.5 Microns/ Pretied Purse String On Pouch Usfda Approved , Disposable Laparoscopic Clip Applier Preloaded With 15/16 Clips, 5Mm Diameter With Clip Logic Technology And Digital Display Titanium Clips- U Shaped , Laparoscopic Liner Cutter Without Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 60Mm, Capable Of Loading All Length Cartridges On Same Gun Only , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,9Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Up To And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip- Focus 9 , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,17Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Upto And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip - Focus 17 , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 35 Cm Shaft Length With 5 Mm Wide Straight Jaw Design With Seal Length Of 20Mm And Cut Length Of 16Mm,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy And Having A Temperature Controlled Mechanism Within The Jaw And Having Articulation Of 110 Degree(55 Degrees On Both Sides) And Capable Of 360 Degrees Rotation , Advanced Bipolar Tissue Sealer 37 Cms, With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm Jaw Aperture Designed For Use In Laproscopic Surgical Procedures With Curved And Tapered Tip And Uses An Advanced Algorithm For Intelligent And Efficient Energy Delivery. Device To Have Intuitive Design With Separate Seal And Cut Button And 360 Degree Continuous Shaft Rotation , Connecting Cable For Ultrasonic Harmonic Scalpel For Open Energy Probes Compatible With Focus Plus Shear- Hp Blue , Connecting Cable For Ultrasonic Harmonic Scalpel For Lap Energy Probes Compatible With Ace Plus Shear Hp054 , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (2*2 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*2) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*1 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (1.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (3 Mm) Diameter Drill Bit Machine With Insertion Tools , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 2.0,2.5 And 3.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Tan Colour Code For Vascular Applications , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 3.0,3.5 And 4.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Purpule Colour Code For Medium To Thick Tissue , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Black Varied Staple Height Of 4, 4.5 And 5Mm Leg Length , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 2*4Cm Or Size 2-3*5-6Cm , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 5*10Cm Or Size 5-7*7-11Cm Or 4*8Cm , Disposable 10 Mm Endoscopic Clip Applier With Facility Of Loading Clips Independent Of The Firing Mechanism: Medium/Large Size , Disposable Clip Applier Preloaded With 20 Clips, Superinterlock Security With Clip Design Technology Medium , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Urine Collecting Bag, Disposable 2000 Ml With Uroflow Meter , Central Neck Line – Double Lumen (Antimicrobial Coated/ Chlorhexidine , Silver Sulfadiazine Coated) Central Lumen Catheter, Double Lumen) 7 Fr Usfda/Ce Certificate With Notified Body , Microcatheter Selective Infusion Microcatheters For Intra Cranial Aneurysm Treatment With 2 Tip Markers , Microcatheter Selective Infusion Microcatheters For Deploying Intracranial Device: Stent Deployment , Microcatheter Selective Infusion Microcatheters For Flow Diverter Delivery With Single Tip Markers 0.027Inch , Microcatheter Flow Dependent Super-Selective High Flow Infusion Microcatheters For Cerebral/Spinal Avms (Compatible With Dmso) , Micro Guide Wire For Microcatheter Shapable Distal End And With Torque 0.014Inch , Aortic Punch 4 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 4.5 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 3.6 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Laproscopic Port With Trocar 5Mm Optically Guided Bladeless Trocar 5Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Programmable Automatic Bipsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. , Patient Pre Operative Skin Prepration Solution 25-35 Ml Patient Pre Operative Skin Prepration Solution 25-35 Ml In One Step Sterile Applicator Container For Single Use With 2% Chlorohexdine Gluconate (Chg) And 70% Ipa With Orange Tint Colour Or Easy Visulization, Us Fda Approved (As Per The General Specification To Be Used Only 25-35 Ml To The Patient Part Preparation In Single Surgery) , Rem (Return Electrode Monitoring) Single Use, Corded Patient Return Electrodes Conductive Adhesive Hydrogel With Usfda , Surgical Gloves 6.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Ionic Silver Highly Absurbent Multilayer Foam Dressing With Broad Spectrum Antimicrobial And Having A Soft Siliconadhesive Wound Contact Layer, Providing Sustain Release Of Silver Upto 7 Days Size: 10 Cms X 10 Cms , Self Adherent Moist Wound Foam Dressing Made Up Of Multilayer Matrix With Soft Silicon Adhesive Layer For Pressure Pressure Ulcers/Bed Sores At Sacrum 16 Cms X 20 Cms Approximate , Double Wall Resuscitator With Peep Valve In Adult It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult & Peadiatric It Should Have Provision To Attach Manometer For Paediatrics Ambu Bag Bag Volume: Mark Iv (1300 Ml) Or More Weight: Adult (415 G) It Should Be Us-Fda, Ce & Iso Certified , Double Wall Resuscitator With Peep Valve In Paediatrics It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult & Peadiatric It Should Have Provision To Attach Manometer For Paediatrics Ambu Bag Bag Volume: Mark Iv Baby (300 Ml) Weight: Baby (190 G) It Should Be Us-Fda, Ce & Iso Certified , Single Patient Use Sebs Resuscitator (Spur Ii With Peep Valve In Neonatal) • It Should Be Single Use Resuscitator Made To Sebs Material Not Pvc. • It Should Have Unique Single-Shutter Valve System For Reliable Functionality & Swivel Between Valve And Mask Permits 360° Positioning In Relation To The Patient • It Should Have Thin-Walled Compression Bag With Hand Strip. • Resuscitator Volume: Neonate(220Ml) • (Including Reservoir And Mask) • It Should Be Ce/Iso, Us Fda Certified. , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be And Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Offset Connector Cardio Sensor Electrodes • It Should Have High Conductive Wet Gel To Ensure Reliable Traces. • It Should Be Design With Offset Connector To Prevent Artefacts From Disrupting The Readouts • It Should Have High Quality Ag/Agcl Sensor To Ensure Excellent Trace Quality • It Should Have Size Not More Than 72 X 68 Mm • • Sizes –Adult , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Ultrasorbs Ap Disposable Drypads, Dry Pad For Moisture Management, 58.4X90cm, With Breathable Layer, Super Absorbent Core, Aqua Shield Film And Air Permeable Back Sheet, Absorbency Of 1800-2300Gm, Usfda/Ce/Bis Compliant, Iso13485 Compliant , Over-The-Ear Nasal Cannula Over-The-Ear Nasal Cannula With Star Lumen, 50 Tubing, Must Be Flexible Contoured Lip Tab Provides A High Level Of Stability And Patient Comfort. Over-The-Ear Design For A Comfortable And Secure Fit, Crush- And Kink-Resistant Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Pediatric Nasal Cannula Softech With Universal Oxygen Connector, 7 Star-Lumen Tubing Lightweight, Flexible Nasal Cannula With Standard Over-The-Ear Designed That Optimizes Fit And Stability, Soft Nasal Prongs Help Maximize Patient Comfort. Individually Packaged For Convenience And Sterility. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Volumetric Incentive Spirometer (Adult) Volumetric Incentive Spirometer (Adult) 4000 Ml And Above With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification , Volumetric Incentive Spirometer (Pediatric) Volumetric Incentive Spirometer (Pediatric) 2500 Ml With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Mask For Tracheostomy Adult Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Pardiatric Mask For Tracheostomy Pediatric Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Elongated Aerosol Mask Adult Elongated Aerosol Mask Adult With Under-The-Chin Design For Excellent Fit On Wide Range Of Face Sizes Must Be Clear, Soft Vinyl For Patient Comfort; Adjustable Nose Clip Assures Comfortable Fit; Specifically Designed For Aerosol Therapy; Must Be With Supplied With 6 Ft. Corr A Flex Corrugated Tubing, Featuring Cuttable Sections Every 6 In. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Limb Portable Adult Ventilator Circuit With Universal Single Limb. Must Be Complete Kit With Main Circuit Hose, Exhalation Valve Manifold, Aerosol Hose, Patient Elbow Connector, Proximal Airway Pressure Line, Exhalation Valve Line, And Humidifier Limb. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilayor Circuit Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Infant Prong Cpap Cannula Infant Prong Cpap Cannula Nasal Size 0 With Designed To Reduce Trauma Associated With Delivery Of Infant Nasal Cpap. Must Be Soft Siliconised, Anatomically Curved Prongs To Enhance Fit. Luer Fitting On Expiratory Connector To Allow Proximal Airway Pressure Monitoring. Each Set To Include, Soft Siliconised Cannula; Inspiratory & Expiratory Elbow Connector; Knit Cap; Two 6 In. Hook And Loop Fastener Sections; Two 10 To 7.5 Mm Adaptors. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Fhme Heat And Moisture Exchangers With Bacteria Viral Filters Bacterial Filtration Efficiency≫ 99.99 % And Viral Filtration Efficiency ≫ 99.9999% . Filter Membrane Should Be Of A Hydrophobic Non-Woven Polypropylene Material. Should Be Tailored To Meet The Specific Needs Of Both Anaesthesia And Intensive Care. , Tracheostomy Hme: 1 Heat And Moisture Exchangers For Spontaneously Breathing Tracheotomy Patients. 2 Should Have In Built Oxygen Port. 3 Should Be Compact & Light Wt. 4 Should Be Suitable For Ambulatory Patients, Sampling And Suctioning Can Be Done Without Removing It. 5 The System Should Have Kink Resisting Oxygen Tubing , Double Lumen Endobronchial Tube Left: Size-37Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left: Size-39Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Manifold Manifolds In 2, 3, 5 Port With Configuration Of Left-Right Orientation, On-Off Handle, Full-Half Body, 200 Psi-500 Psi Rating And Wide Port Spacing. Should Have Clear Polycarbonate Body To Provide Durability And Visibility, Airless Rotator And Large Bore Inner Lumen Throughout Including Rotator.Usfda Approved , High Pressure Tube High Pressure Tubing In 25Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 51Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 76,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 122,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , High Pressure Tube High Pressure Tubing In 183Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda Approved , Torque Device Torque Device For .014 To .038 Standard And Hydrophilic Guide Wires With Squeeze-Load-Release Mechanism.Usfda Approved , Radial Band Radial Hemostatis Band In 24 Cm . Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Radial Band Radial Hemostatis Band In 29 Cm. Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Angiography Needle Angiography Needle In 18G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Needle Angiography Needle In 20G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Wire Ptfe Guidewire In .035, .038, In Regular Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coating For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , Angiography Wire Long Length Ptfe Guidewire In .035, .038, With Exchange Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coatting For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , Hydrophilic Wire Long Length Hydrophilic Guidewire Of .018, .025, .035, .038 In 180Cm, 220Cm, 260Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Approved , Hydrophillic Braided Sheath Hydrophilic Braided Sheath Introducer In 4F To 7F, Length Of 7, 11, 16, 23Cm With The Option Of .018, .021, .025 Plastic Jacketed And Spring Coil Guidewire. Should Have Ultra-Thin Wall And Flat Wire Braiding Technology To Provide Support And Low Profile.Usfda Approved , Femoral Sheath With Needle Femoral Sheath In 5F To 8F, Length Of 11-23Cm With Puncher Needle Of 18G And Guidewire Of .035, .038. Should Have Rotating Suture Ring, Snap-Fit Dilator To Prevent Slipping During Insertion And Holster Pack. Should Be Available In Polypropylene. Usfda Approved , Angiography Catheter Diagnostic Catheter In 4F-6F, Length Of 70-110Cm & 125Cm , Should Come In Various Shapes & Curve Length Including Jl & Jr (1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 6 Cm), Al, Ar, Tig, Mp, Im, Sones, Pigtail (Straight, Angle, Radial). Should Have Flat Wire Braiding, Nylon Material, Thin Wall Design For Higher Flow Rates, Radio-Opaque Tip, Strain Relief And Winged Polycarbonate Hub. Should Be Available In Various Configurations- Braided, Non Braided, Short Tip, Bumper Tip, Sideholes As Applicable. Usfda Approved , Angiography Radial Catheters Diagnostic Radial Catheter With Radial Ultimate Curve In 4-6F. Lenght Of 100Cm, 110Cm, 125Cm. Should Have Four Type Of Radial Ultimate Curves. Should Have Flat Wire Braiding, Nylon Material, Thin Wall Design For Higher Flow Rates, Radio-Opaque Tip, Strain Relief And Winged Polycarbonate Hub. Us Fda Approved , One Loop & Triple Loop Snare Snare Kit(2-35Mm Diameter, 90-Degree Nitinol & Gold-Plated Tungsten Loop) And Multiloop Snare Kit(2-45Mm Diameter, Three Interlaced Nitinol Loops) For Foreign Body Retrieval, Should Come With Flexible, Reinforced, Strain Relief Hub To Reduce Buckling And Unique Peel Away Insertion Tool. Usfda Approved , Ptca Kit (1) Three Port Manifold With Knobs To TurnRight When Open (2) One Pressure Line, (3) Fluid Connecting Line, (4) Contrast Connecting Line, (5) One Three Way Stop Cock, (6) One Y-Connector Hemoststic Valve With Spring Type Push And Release Mechanism, (7) One Inflation Device With Manometer Upto 30 Atm (Easy To Operate With Luminescent Dial), (8) One Luer Lock Controlled Syringe Of 10 Ml With Finger Grip, (9) Insertion Needle, (10) Torque Device.Usfda Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes Are 5Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 6Fr , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 7Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes 8Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes Are 10Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes 12Fr. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3.5Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 5.5Mm , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. T Size 13Fr . , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. Sizes 16Fr. , Catheter Mount Double Swivel Connector, It Should Have Bronchoscopy Port . It Sholud Be Approved By Us Fda , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism,Radiopaque Stripe,Gamma Sterilizedsize – 20 Length (0.8 – 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism,Radiopaque Stripe,Gamma Sterilized Size – 24Fr Length (0.8 – 5.0) , Percutaneous Endoscopic Gastrostomy (Peg) 24Fr Percutaneous Endoscopic Gastrostomy (Peg) Medical Grade Silicone Construction.External Retention Ring .Universal And Bolus Feeding Port Connectors,Medication Port.Collapsible Internal Retention Bumper.Radiopaque Stripe And Bumper.Tubing Clamp.Eto Sterilized.Sizes – 24Fr , Anti Microbial Gloves Size 6.0 , Anti Microbial Gloves Size 6.5 , Anti Microbial Gloves Size 7.0 , Anti Microbial Gloves Size 7.5 , Anti Microbial Gloves Size 8.0 , Anterior Chamber Iol Pmma Material, Single Piece Kelman Multiflex Design5-6 Mm Optic Size With 12-13 Mm Overall Size Biconvex Power Range +12 To +24Should Be Iso Or Ce Certified. Manufacturer Should Be Asked To Sample For Approval. , Capsular Tension Ring Standard Capsular Tension Ringpmma Material With One Eyelet Each At Each End 10 Mm To 12 Mm Overall Diameter Sterile Should Be Iso/Ce Certified Mfg. , Neonatal High Flow Nasal Cannula Having 8 Litre Flow. Should Have Soft Tip . , Pur-Xro Catheter 20 Cm, 28G/1Fr Picc Line With Stylet, Splitting Needle With Securing Wings With 8 Cm Extension Tubing (Flow Rate 1Ml/Min) , Pur-Xro Catheter 30 Cm, 24G/2Fr Picc Line With Split Cannula And 10Cm Extension Tubing Over Catheter (Flow Rate 0.2Ml/Min) , Long Introducer Sheath (20-30 Cm Long) (Size 5Fr..) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 6Fr.) Us Fda + Ce/ Dgci Approved·· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 7Fr.) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 4F Us Fda + Ce/ Dgci Approved·Sizes 4 French 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 5F Us Fda + Ce/ Dgci Approved·Sizes 5 French 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 6F Us Fda + Ce/ Dgci Approved· Sizes 6 French 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Ptfe Coated Diagnostic Guide Wire – (Exchange Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In , 0.035 Inches Size· Should Be 240-300 Cm Long· Should Be Available As Straight Or J-Shaped Tip· Should Be Available Fixed As Well As Movable Core. , Hydrophilic Diagnostic Guide Wire – Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved·Should Be Available In 0.032 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Hydrophilic Diagnostic Guide Wire – Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Radiofocus Miniplastic Guidewire (, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Sould Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 150-180 Cm Long , Judkins Catheter (Jr) Right Judkins Catheters In Various Standard Curves And Lengths. 5 French , Judkins Catheter (Jr) Right Judkins Catheters In Various Standard Curves And Lengths. 6 French , Judkins Catheter (Jr) Right Judkins Catheters In Various Standard Curves And Lengths. 7 French , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters In Various Standard Curves And Lengths. 5 French , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters In Various Standard Curves And Lengths. 6 French , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters In Various Standard Curves And Lengths. 7 French , Judkins Catheter Pigtail Us Fda + Ce/ Dgci Approved Left And Right Judkins Catheters In Various Standard Curves And Lengths. 5 French , Judkins Catheter Pigtail Us Fda + Ce/ Dgci Approved Left And Right Judkins Catheters In Various Standard Curves And Lengths. 6 French , Judkins Catheter Pigtail Us Fda + Ce/ Dgci Approved Left And Right Judkins Catheters In Various Standard Curves And Lengths. 7 French , Multipurpose Catheter Us Fda + Ce/ Dgci Approved Multipurpose Catheters In Various Standard Curves And Lengths. 5 French , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · 5 French , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · 6 French , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · 7 French , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · 5 French , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · 6 French , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · 7 French , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. 5 French , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. 6 French , Nternal Mammary Catheter 7Fr Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. 7 French , By-Pass Graft Catheter 5Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths 5 French , By-Pass Graft Catheter 6Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths 6 French , By-Pass Graft Catheter 7Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. 7 French , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved · 5 French , Introducer Sheaths For Pediatric Use (Size 5 Fr.) With J Tip/Straight Introducer Wire Us Fda + Ce/ Dgci Approved· Between 5.5-7.5 Cm Long· 0.021 Inch Straight Introducer Guide Wire· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant· With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· Should Have Smooth And Resistance Free Insertion , Arterial Pressure Monitor Lines (100 Cm Long) Us Fda + Ce/ Dgci Approved·Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (150 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (200 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Angio.Kit/Ptca Kit (3 Port Many Fold With Attached Tubing One Pressure Line + Two Iv Set Connecting Tube And Two Leurlock Syringe ) Us Fda / Ce/ Approved , Venaseal Closure System For Varicose Veins Usa/Fda Approved N Butyl Based Adhesive Formation 50/90/105/120 Cm 145 Cm(3/4/6/8 F ,014/0.35 Compatible , Bone Marrow Biopsy Needle With Diamond Bevel Tip & Tapered Distal Canula. Disposable Bone Marrow Biopsy Needle Should Have Ergonomic T- Handle Design With Seprate Handle Cap. Should Have Trocar/Diamond Tip For Easy Coring Of Bone. Should Have Triple Crown Cannula Tip With 6 Facets.Should Be Available With Narrow Acquition Cardle With Sample Size Verfication Marking Should Be Available In 8,11,13 Gauze Usfda/Ce Approved 8G 4” & 6” , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) Sizes - 12Fr, 2-Way , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) Sizes - 14Fr, 2-Way , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) Sizes - 16Fr, 2-Way , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) Sizes - 18Fr, 2-Way , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Having Maryland Jaw Sealer And Divider With Wide Jaw Aperture 13Mm And Cut Length 18.5Mm With Shaft Rotation Of 350 Degrees And With One Step Sealing Mechanism. Should Have The Manual Cutting Mechanism. And It Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligature Technology Have Small Jaw Tissue Sealing System For Open Procedures Vessel Sealing Instrument With Cut Length Of 14.7 Mm, Seal Length Of 16.5Mm, Jaw Angle 28 Degrees. Should Have The Manual Cutting Mechanism.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligature Technology Laparoscopic Blunt Tipped Vessel Sealer And Divider 37 Cm Long 5Mm Instrument. Wide Jaw Aperture 14.5 Mm With Shaft Rotation Of 180 Degrees ; Multifunctional Laparoscopic Device For Tissue Fusion.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligasuretechnology Have36mm Jaw Length, 180 Degree Rotatable Instrument With Curved Blade For Large Volume Tissue. Should Have The Manual Cutting Mechanism. , Double Lumen Catheter Size- 12 Frx16 Cm Double Lumen Catheter Size- 12 Frx16 Cm (Double Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot)Size- 12 Frx16 Cm With Us Fda / Iso Ce Certified , Double Lumen Catheter Size- 12 Frx13 Cm Double Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot Size- 12 Frx13 Cm , Long Term Double Lumen Dialysis Catheter Size- 14.5 Frx23 Cm (Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade)Size- 14.5 Frx23 Cm Usfda Certification Along With Iso, Ce , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade 15 Fr X 19 Cm , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade Size 15 Fr X 23 Cm , Transperant Surgical Wound Dressing Size- 5X 5.72 Cm Tranparent Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidal Protection And Anti Microbial Property. Provide A Waterproof Sterile Barrier To External Contaminating Including Liquids, Bacteria Anf Viruses Size- 5X 5.72 Cm , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Proteciton And Anti Microbial Property Size- 10X15 , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property Size- 10X30 , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property Size- 10X40 , Multi-Vent Mask Pediatric, Multi-Vent Mask Pediatric, Air Entrainment Masks, Must Be Safe, Simple Delivery Of Variable Oxygen Concentrations. Each Mask To Includes Color-Coded Diluters: Green For Low Concentration, White For Medium Concentration. Locking Ring To Secure Flow Setting. Must Include Adaptor For High Humidity Entrainment. Complete Kit With 7-Ft Oxygen Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Closed Suction Catheter Mdi Port Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip With Mdi Port.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Zig-Zag Ports For Better Suctioning. Twin Peep Seals. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. 12 Fr , Closed Suction Catheter Mdi Port Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip With Mdi Port.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Zig-Zag Ports For Better Suctioning. Twin Peep Seals. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. 14 Ft , Closed Suction Catheter Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Zig-Zag Ports For Better Suctioning. Twin Peep Seals. Available In Both Endotracheal And Tracheostomy Version.Can Be Used For 72Hr. 12Fr , Closed Suction Catheter Has Isolated Turbo Cleaning Chamber14 Fr. Closed Suction Catheter Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Zig-Zag Ports For Better Suctioning. Twin Peep Seals. Available In Both Endotracheal And Tracheostomy Version.Can Be Used For 72Hr. 14 Fr , Multifocal Iol Multifocal Iol (Multifocal Iol Biconvex, Single Piece Optic Size 6 Mm, Overall 12-13 Mm Haptics Hydrophobic Single Loop Or Hydrophilic Double Loop Uv Blocking 360 Degrees Square Edge, Sterile Packing Disposable Sterile Injector For Sub 2.8 Mm Incision Power +16 To + 25 D Diffractive Multifocal Design With Near Add +3 To +4 D Iso Or Ce Approved Samples Required For Approval , Glaucoma Drainage Implant (Valved) With Silicon Tube Adult (184Mm2) , Glaucoma Drainage Implant (Valved) With Silicon Tube Paediatric (96Mm2) , Scleral Fixiated Intraoccular Lense Single Piece Pmma: Optic6-6.5Mm, Overall13.5Mm Haptic With Hole For Suture Fixation , Central Line Triple Lumen With Y Needle And Nitinol Guide Wire 7 To 8.5 Fr With 15Cm / 20Cm Catheter With Tecoflex/Polyurathane Material , Post Operative Surgical Cover Dressings Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver & Tripple Hydrocolloid Matrix Dressings With Broad Spectrum Bactricidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved 9X30cm , Post Operative Surgical Cover Dressings Hydrofiber Dressings 20X50 Cm Post Operative Surgical Cover Dressings Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver & Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactericidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved 20X50 Cm , 2 Pcs Flat Base Ostomy Body Fit 60 Mm Kit 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm, Elastic Tape In Semi-Circular Shape With Hydrocolloid Adhesive For Extra Security Of Base Plate. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm), Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks 60 Mm Kit , 2 Pcs Convex Base Ostomy Body Fit 60 Mm Kit Two-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm)Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks , 1 Pcs Trasnparent Colostomy Body Fit 60Mm Kit One-Piece Colostomy Bag- Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.34 N/Mm), Bag Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. One Side Transparent For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm) 60Mm Kit , 2 Pcs Flat Base Ostomy Body Fit Bag 60 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. Window On Bag For Inspection 60Mm . With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic. Bag 60 Mm , 2 Pcs Flat Base Ostomy Body Fit Bag 70 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. One Side Transparent For Inspection. 70Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic Bag 70 Mm , 2 Pcs Convex Base Ostomy Body Fit Bag 60 Mm Two-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material. Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. . Window On Bag For Inspection 60Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic Bag 60 Mm , Antimicrobial Transperant Provides Immediate And Continuous Antimicrobial Protection With Integrated Chlorhexidine Gluconate (Chg) Gel Pad, Proven To Reduce Crbsi And Vascular Catheter Colonization, Size 11.5Cm To 8.5Cm, Breathable Film Coating Provides A Barrier To Microbes* And External Contaminants Size 11.5Cm To 8.5Cm, Sizes:11.5Cm X 8.5Cm, , Sterile Self Adherent With Lipido Colloid Technology Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad , A Superabsorbent Layer ,A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. 13X13cm , Sterile Self Adherent With Lipido Colloid Technology Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad , A Superabsorbent Layer ,A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. 10X25cm , Polysiloxane And Silicone Gel Sheet For Scar Management Size 10 X10 Cm , Polysiloxane And Silicone Gel Sheet For Scar Management Size 5 X5 Cm , Triple Leyar Antimicrobal Form Dressing For Burn Wound With Silver Sulphate, Silver Content 1.2 Mg/Cm 2 With Active Release Of Silver Upto 7 Days With Soft Silicon Atraumatic Wound Contact Layer For Painless Dressing Change. Product Should Be Ce/Usfda Certified Size 20X20 Cm (45Mm) + 15% Deviation Insize Will Be Acceptable. , Triple Hydrocolloid Skin Barrier Where No Cutting Is Required Comprised Of Pectin, Gelatin And Sodium Carboxy Methyl Cellulose,Elastomeric Polymers Extending Turtlenecking Effect And Rebounding Memory Technology With Audible Click And Flexible Tape Collar. 70 Mm , Circular Stapler 33Mm With Controlled Tissue Compression Or Dst Technology With, Longer Staple Leg 4.5 Mm To 5.5Mm , Fixed Or Tilt Top Anvil ,Available In Various Shaft Sizes Std. Or Xl For Deeper Access , Usfada Approved , Laparoscopic Liner Cutter Without Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 45Mm Capable Of Loading All Length Cartridges On Same Gun Only , Laparoscopic Shears 5Mm Diameter,36Cm Long, 18Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting,Sealing,Grasping And Coagulating Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, Advance Hemostasis Hand Activation Mode For Sealing Vessels Upto 7Mm In Diameter ,Ergonomic Handle Compatible With Ultrasonic Energy Source, Capable Of Hand And Foot Activation With An Integrated Hand Piece And Transducer. , Speech Prosthesis For Laryngectomy 22.5Fr (6 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (8 Mm) , Cutting &Coagulations Device With Tissue Fusion Ligasure Technology Instrument For Open Surgeries With Instrument Length Between 21-23 Cm And Electrode Length Between 17-21 Cm Having 22 Degree Curved Zow With Contoure Tip Activation Both Though Hand Activation And Foot Activation With A Manually Controlled Cutting Mechanisn , Cutting &Coagulations Device With Tissue Fusion Ligasuretechnology Have Vessel Sealing Instrument For Open Surgeries Cutting &Coagulations Device With Tissue Fusion Ligasuretechnology Have Vessel Sealing Instrument For Open Surgeries With Reusable Clamp Length Between 16-18Cm, With 12-14 Degree Jaw Curve.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Dialyzer Size 1.3 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.4 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.6 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tu Bing Set Must Be Same Company. , Dialyzer Size 1.8 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Padiatric Dialyzer Size 0 .6 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Padiatric Dialyzer Size 0.8 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved 8 Mm , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved 10Mm , Nasal Haemostatic Sponge Pack With Out Airway 8 Inch , Nasal Haemostatic Sponge Pack With Out Airway 10 Inch , Nasal Haemostatic Sponge Pack (With Airway) 8 Inch , Flexometlic Tube 3-8.5 With Stylet Reinforce Et Tube With Wiring From Tip To End It Should Be Approved By *Us Fda , Disposable Transducers For Invasive Pressure Monitoring Compatible With Available System In Cath Lab In Smsh Us Fda + Ce/ Dgci Approved· Disposable Transducers For Invasive Pressure Monitoring· Should Be Compatible With Available System In Cath Lab (Iabp – Data Scope & Cath Lab Transducer) And Iccu At Smsh· Should Meet Highest Medical Industrial Standards· Quality Certification Should Be Provided Form Authorized Agencies , Braided E Caprolactone Coated Lactomer 1, 90Cm Gs-25,37-40Mm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 2-0 90Cm Gs-25,3Omm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 1 90Cm Gs-25,37-40Mm1/2 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Taper Point, 90 Cm , Braided E-Caprolactone Coated Lactomer 3-0 75Cm C-14 , Undyed 24Mm 3/8 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,30Mm Needle, Size 2-0, 1/2 Circle Taper Point, 90 Cm , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Reverse Cutting Os Needle, 90 Cm , Braided E-Caprolactone Coated Lactomer 0 90Cm Gs-24 , Violet 40Mm 1/2 Circle Taper Point , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,20Mm Needle, Size 3-0, 1/2 Circle Taper Point, 70 Cm , Braided E-Caprolactone Coated Lactomer 1-0 90Cm Gs-25 , Dyed/Undyed 37-40Mm 1/2 Circle Reverse Cutting , Polyglactin 910 Violet Braided, 1, 35 Cm 1/2 Circle Reverse Cutting (Heavy) 23 Mm -25 Mm Needle , Polyglactin 5-0 Rb Oval ½ Circle 16 Mm 45 Cm , Polyglactin 5-0 Cc 3/8 Circle 16 Mm 45 Cm , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure Mp, Purest Form Of Triclosan, 26Mm Needle, Size 2-0, 3/8 Circle Cutting, 90 Cm , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydiaxanone Violet 1/2 Circle Round Bodied 30 Mm Needle, Length 70Cm Size 3-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydiaxanone Violet 1/2 Circle Round Bodied 30 Mm Needle, Length 70Cm Size 4-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 1/2 Circle Taper Point Rb-2, Double Needle, 13 Mm Needle, Length 70Cm Size 5-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 3/8 Circle Taper Point, Bb Single Armed Needle 17 Mm Needle, Length 70Cm Size 5-0 , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Single Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm , Monofilament Polyglyconate 1 150Cm Gs-25 Loop, Green 48Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 2-0, 75Cm Green 26-30Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 3-0, 75Cm Green 20-26Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 4-0, 75Cm Green 17-20Mm 1/2 Circle Taper Point , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 3-0,70 Cm,1/2 Circle R.B.,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 4-0,70 Cm,1/2 Circle R.B.,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 5-0,70 Cm,1/2 Circle R.B.,13 Mm , Monofilament Glycomer 1 90Cm Gs-21 , Volet 37Mm 1/2 Crcle Taper Pont , Monofilament Glycomer 2-0 90Cm Gs-21 , Volet 37Mm 1/2 Crcle Taper Pont , Non Absorbable Surgical Suture, Sterilized Surical Needled Black Braided Silk With Needle 1/2 Circle Round Bodied 30 Mm Needle , Length 70 Cm Size 2-0 , Braided Coated Non Absorbable Suture Usp 1-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 2-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 3-0 75 Cm X 2 , Silk Reel 4-0 , Braided Polyester Caoted With Silicon 2, 26Mm 1/2 Circle Rc 75Cm , Braided Polyester Caoted With Silicon 5, 55Mm 1/2 Circle Rc 75Cm , Polypropylene Blue Monofilament, 2-0, 90 Cm 1/2 Circle Round Body Double Needle 26 Mm , Polypropylene Blue Monofilament Usp 3/0,2,90 Cm,1/2 Circle Taper Point (Double Armed),26 Mm , Polypropylene Blue Monofilament, 4-0, 75 Cm 1/2 Circle Round Body Double Needle 17 Mm , Polypropylene Blue Monofilament Usp 5/0,1,90 Cm,1/2 Circle Taper Point (Double Armed),18 Mm , Polypropylene Blue Monofilament, 6-0, 75 Cm 3/8 Circle Round Body (380 Microns) Double Needle (Cutting) 13 Mm , Non Absorbable Polypropylene Surgical Sutures Size:7-0,3/8 Circle C1 Taper Point Cv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,8 Mm,60 Cm , Monofilament Polybuetester Coated With Polytribiolate 6-0 75Cm 2Xcv-1X36 , Blue 9Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 4-0 90Cm 2Xcv-23X36 , Blue 17Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 7-0 60Cm 2Xmv-175-8 , Blue 8Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 2-0 90Cm 2Xv-20X36 , Blue 26Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 3-0 90Cm 2Xv-20X36 , Blue 26Mm 1/2 Circle Taper Point , Non-Absorbable Synthetic Unidrectional Dual Cut Angle Barb With Welded Loop Or Tab End Made Up With Polybeutester Size 1, 37Mm, 30Cm, 1/2 Circle, Taper Point , Synthetic Nonabsorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polybeutester Blue Size 2-0, 1/2 Circle, 37Mm, 30Cm Taper Point , Absorbable Synthetic Unidirectional Dual Cut Angle Barbed With Welded Loop Or Tab End Made Up With Polyglyconate 2-0 26-30 Mm 30 Cm 1/2 Circle Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 1-0, 1/2 Circle, 37Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 2-0, 1/2 Circle, 26Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 3-0, 1/2 Circle, 26Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Glycomer Blue Size 2-0, 1/2 Circle, 24Mm, 30-45Cm Rc , Laproscopic Knotless Pga -Pcl Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Unidirectional Taper Point 26 Mm & 20 Cm Size 2-0 , Polyester Ethylene Terephthalate Nonabsorbable Surgical Braided, Sterile, Surgical Suture Composed Of Poly (Ethylene Terephthalate.) Long-Chain, Linear Polyesters 1 /2 Circle Tapercut 2 X V-5 Double Needle 26 Mm 90 Cm Green Color Size 2-0 , Laproscopic Knotless Pga -Pcl Bidirectional Taper Point Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Bidirectional Taper Point 17 Mm & 32Cm , Absorbable Antibacterial Polydiaxonone Monofilament Taper Point Surgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Voilet Monofilament 1/2 Circle Taper Point Ct-1 40 Mm Needle 90 Cm Suture Size 1 , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 1-0,90 Cm,1/2 Circle R.B.,30 Mm , Non-Absorbable Surgical Suture Black Braided Silk 1-0 Rc 3/8 Circle 45 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 5-0 Rc 3/8 Circle 12 Mm 76 Cm , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 5-0,76 Cm,3/8 Circle R.B,12 Mm , Non-Absorbable Surgical Suture Black Braided Silk 6-0 Rc Mp 3/8 Circle 8 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 2-0, 1/2 Circle Taperpoint, 36 Mm,100 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 6-0 Rb Micro Point ¼ Circle 8 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 4-0 Cc 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 3-0 Cc 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 5-0 Cc 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Voilet 5-0 Rb Oval 1/2 Circle 16 Mm 45 Cm , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 26Mm Length 70Cm3-0 , Non Absorbable Surgical Suture Sterilized Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm4-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm 5-0 , Non Absorbable Polypropylene Surgical Sutures Size:6-0,3/8 Circle 175-6 Taper Point /Rc Bv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,9.3 Mm,60 Cm 13 Mm , Non Absorbable Polypropylene Surgical Sutures Size:7-0, Compound Curve ( 1/2 & 3/8 Circle) Circle 175-6 Taper Point Blackmatte Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,9.3 Mm,60 Cm , Monofilament Synthetic Absorbable Suture Poliglecaprone 25 - Undyed Ep 3-0,70 Cm,1/2 Circle Oval R.B. J.B. Needle,26 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 3-0, 3/8 Circle Reverse Cutting,Ps Prime 24 Mm,75 Cm , Absorbable Surgical Suture Usp (Vicryl) #6-0, 0.7 Metric, 45Cm, 8Mm 1/4 Circle Braided Coated Polyglactin 910 Violet Suture , Nonabsorbable Surgical Suture Usp (Ethicon) #8-0, 38Cm, 6Mm 3/8 Circle Spatulated Micropoint Needle, Natural Braided Suture , Introduer Needle, 18Ga-70Mm Long (Type-Adult) , Dialysis Catheter, Single Lumen Femoral, 14G-14Cm Long, Type- Staright , Ss Guide Wire Advancer With Safety Tube, Size 0.035 X 70 Cm, Type- Uncoated Angle Tip , Kally’S Pad , Foot Step Single , Foot Step Double , Foot Step Triple , Autoclave Drum (Medium) 6X6 , Autoclave Drum (Medium) 11X5 , Autoclave Drum (Medium) 9X9 , Autoclave Drum (Medium) 12X10 , Autoclave Drum (Medium) 14X9 , Autoclave Drum (Medium) 11X9 , Autoclave Drum (Medium) 15X12 , Elbow Gloves , Artery Forcep (Curved) 6 8 10 , Artery Forcep (Straight) 6 8 10 , Scissor (Straight) 6 8 10 , Scissor (Curved) 6 8 10 , Chittal Forcep 12 , Suction Machine Pead. , Plastic Appron , Baby Tag , Mother Tag , Shoe Cover , Bain Circuit Adult+Pead , Ambu Bag Adult , Ambu Bag Pead. , Thermometer Digital , Hand Wash 650 Ml , Hand Rub 500 Ml , Soap 75 Gm , Ortho Cotton Roll 10 Cm X 5 Meter , High Flow Oxygen Mask , Reserving Bag 2 Liter , Reserving Bag 500Ml , Manket Capsulorehexn Forcep , One Tooth Forcep 6 8 10 , Holding Forcep Iol 6 8 10 , Cannula 23 No. , Flow Sensor , Adult Dispo. Breathing Circuit , Pead. Dispo. Breathing Circuit , Hme Filter , Wire Vectis , Masket Capsulorahexis Forceps 6 8 10 , Vanna’S Scissor Curved 6 8 10 , Lims Forceps (One Tooth Forceps) 6 8 10 , Appasamy/Ovation(Company Name) , Allies Forcep 6 8 10 , Needle Holder S.S 6 8 10 , Straight Tooth Forcep (Single Tooth) 4 6 8 10 , S.S Suture Needle Half Circle Triangle 15 16 17 , Maggils Forcep 6 8 10 , Anatomical Face Mask Size No- 03, 04, 05, , Connectors (Angles Piece) , Gudel Airway Set , Weighing Scale Pead , Weighing Machine Adult , Gauze Than , Bandage 4 Inch , Bandage 6 Inch , Absorbent Cotton Wool Ip 500 Gm [S2] , Tissue Paper , Liga Clip 400 , Liga Clip 300 , Lma ( I-Gel) (02, 03, 04) , Fistala Probe (Flexible) , Curretle Probe ( Small , Big, Medium) , Beb Cock ( Mosquito Fine) 6 8 , Cheateo Forcep Stand (S.S) Cheatel , Sterlizer Elcetric (2 Feet) , Stich Cutting Seicsor 6 8 , Weight Scale (Neonatl) , Intercostal Srainage Tube 20 22 24 , Icd Bag With Water Seal , Nebulizer , Dressing Trolly With Bulket (S.S) (2 Shelves) Length 76 Cm Width 48 Cm Height 18Cm Bucket
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
49.
Power #9198262 Technical Bid
Servicing, Overhauling And Maintenance Of Swas Field Equipment’S & Wet Panel And Different Other Mechanical Work During Overhauling Of Unit No 09 Of 3X200 Mw, Btps, Obra.- 1 Changing Spindle / Gland Of Root Valves. 2 Cleaning & Blowing By Air Of Impulse Pipelines From Tapping Point To Swas System ( Wet & Dry Panel ) Of Different Samples.# 3 Attending Of Leakage From Steam / Water / Air Lines Of Different Samples. 4 Replacement Of Pressure Gauges / Temperature Gauges / Pressure Switches / Temperature Switches Etc. 5 Servicing, Testing & Calibration Of Pressure Gauges 6 2X4 Ton Chiller Unit -Checking, Cleaning, Servicing, Overhauling And Reconditioning Of Compressor, Main / Circulating Pump & Motor, Storage Tank Solenoid Valve, Temperature & Pressure Gauge, Sensors, Dryer, Inlet / Outlet, Valve, All Tubings & Fittings, Electrical Equipment & Wwwwiring Etc. De-Scaling Of Condeser And Cooling Coil, Filling Of Required Refrigerant Gas And Repairing / Replacement Of Defective Spares. 7 Servicing, Testing & Calibration Of Temperature Gauges.# 8 Servicing, Testing & Calibration Of Temperature Switches. 9 Cleaning / Servicing Of Terminal Blocks / Panels At Swas . 10 Replacement Of Ss Root Valves / Sample Relief Valve 11 Servicing Of Valves 10Mm Size High Pressure / Low Pressure, Manifold Valves, 3- Way Valves Etc# 12 Replacement Of Valves 10Mm Size High Pressure / Low Pressure, Manifold Valves, 3 - Way Valves Etc. / Rota Meter / Self Pressure Valve . 13 Replacement Of Impulse Line As Required. 14 Servicing Of Sampling Cooler Dhx18 / Sco2 And Its Recommissioning 15 Servicing Of Cooler Dhx12 / Sco2 And Its Recommissioning 16 Servicing Of Cooler Dhx06 / Sco1 And Itsrecommissioning 17 Mechanical Fabrication 18 Checking , Cleaning, Servicing, Overhaulingreconditioning Ac Unit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Uttar Pradesh View Result →
50.
Educational and Research Institute #9182769 Technical Bid
Purchase Of Lab Equipments-2 Binocular Polarizing Microscope Observation Method-Bright, Field & Simple Polarized Light Upright , Made Of Aluminum Die-Cast, Binocular , Inclination 30° , 360° Rotating, Inter Pupillary Distance ( Mm ) 48-75 With Dioptric Adjustment. Eyepieces: Wf10x / 18 Mm, High Eyepoint, Secured By Screw., Bi-Directional , Rotation On Ball Bearings, Quadruple Nosepiece, Objectives: N-Plan Plan Achromatic 4X / 0.10 N-Plan Plan Achromatic 10X / 0.25 N-Plan Plan Achromatic 40X / 0.65. All With Anti-Fungus Treatment. 360° Rotatable , 120 Mm Anti-Scratch Painting Stage Pre Centered 1.25 Na Condenser With Iris Diaphragm Coaxial Coarse & Fine With Fine Resolution 4 Μm Upper Stop To Prevent Contact &Adjustable Tension, Illumination - X-Led , 1 ( W ) Power Lifetime ( Hours ) > 65, 000 Power Supply -Output Voltage 5 Vdc 500 Ma With Led Indicator & Li-Ion Rechargeable Batteries Working Time Of Batteries 15 Hrs & 6 Hours Of Charging, Rotating Polarizer ( Swing-Out ) And Fixed Analyzer ( Sliding-Out ) Filters , Service Center Should Be Available In Kerala 3 Polarizing Ore Microscope -Focusing - Coaxial Focusing Is Provided With Coarse Tension Adjustment Ring And Graduated Slow Motion Knobs. Koehlers Illuminator With Pre-Centered 20W Tungsten Halogen Source & Integral Electric Transformer With Intensity Control. Input Voltage 220 Or 110V. Incident Llluminator - Reflected Light Incident Illuminator Consist Of Polarizing Unit, Slot For Filter Holder And A 20 Watt. Intensity Control Transformer Concealed Inside The Base. Input Voltage 220V Or 110 Volts. Intermediate Tube - Built-In Focusable Bertrand Lens With Center Adjustment. Built-In Analyzer Removable From Optical Part. Analyzer Can Be Rotated 90° With Vernier Reading To 6. Compensator 1 Λ, 1 / 4 Λ & Quartz Wedge Can Be Inserted In The Tube As Per Requirem 4 Double Distillation Unit -All Quartz Double Distillation For Ultra-Pure Water Iso 9001:2008 Certified Manufacturer Fully Vertical With Removable First Boiler Output Will Be Pyrogenic Free , Without Organic Matter 0.1- Us / Cm Of S.C & Ph : 7.0 Low Temp. Distillate With Zero Yeast & Zero Plate Count With Automatic Electronic Dual Cut-Off System To Protect The Distiller During Water Supply Failure. To Cuts Off The Power Supply In Two Cases. A ) In Case Of Water Failure To Condenser, The Power Supply To The Unit Is Cut-Off Automatically, By Means Of Flow Switch B ) In Case Of Water Failure To The Boiler, The Power Supply To The Unit Is Cut Off Automatically By Means Of Pt-100 Sensor. Service Center Should Be Available In Kerala 5 Laser Based Distance Measuring Device ( Laser Rangefinder ) -Laser Rangefinder With Range Of 250 Meters, Pythogorar Measurement Capability, Measuring Accuracy: Plus 1.5 Millimeters Compact Rangefinder To Measure Distance, Area And Volume Outdoor Over Long Range ( 250 Meters ) With Pythagoras Function, Equipped With Viewfinder And Timer Function 6 Zoom Stereo Microscope ( Trinocular ) -Stereo Microscope:115Led ( Trino ) Digital Usb Camera With Software 7 Digital Inclinometer-Precise Measurements In Degrees, Percent Or Feet And Inch, Accuracy Of The Level Is At 0 Degree Or 90 Degree Is 0.05 Degree, Light Weight. 8 Double Disc Polishing Machine-Semi-Automatic Power Speed 50 To 1000 Rpm Voltage 230 V Ac Disc Diameter 10 Inch And 12 Inch Frequency 50Hz 9 Magnetic Stirrer -1500 Rpmss Steel Top, Stainless Steel - 2 Litre 10 Hot Plate -400 W, Ss Plate Digital With Timer 11 Brunton Compass-Ndfeb Disc Magnet, Composite Body, Water And Dust Resistance Sapphire Jewel Bearing, Quick-Settling Needle, Needle Lock Button Azimuth: + / - 1 / 2˚ W / 1˚ Graduations • Internal Clinometer: + / -1 / 2˚ W / 1˚ Graduations Bubble Level, Included Leather Case 12 Opisometer-Culture Tube With Screw Cap, 10Ml, 12 / Pk - 16X100mm - Marking Spot - Round Bottom - Borosilicate Glass 13 Digital Water Level Recorder 14 Pocket Stereoscope-Precision Ground Meniscus Lenses. Adjustable Interpupillary Range 50 Mm To 70 Mm. Field Of View 125 Mm X 125 Mm. All Metal Cast Alloy Frame With Fold-Away Wire Frame Legs. Vinyl Case. 15 Hardness Box -9 Minerals, One Small Knife, One Streak Plate And One Magnet.1 ) Talc2 ) Gypsum3 ) Calcite4 ) Fluorite5 ) Apetite6 ) Feldspar7 ) Quartz8 ) Topaz, Corundum9 ) Corundum One Magnifier10 ) Magnet11 ) Knife12 ) Streak Plate 16 Cell For Conductivity Measurement-Stainless Steel , With Holders For Fixing Pellet And Thin Film Samples , Provisions For Heating From Liquid Nitrogen Temperature To 400 C. Liquid Nitrogen Trap For Cooling The Samples, Thermo Couple Temperature Sensor With Digital Display , Rotary Evacuation System, Capable Of The Measurement Of Conductivity And Dielectric 17 Magnetic Stirrer -With Temperature Control, Temperature Sensor ( Digital ) With Heater, Rpm 3000, Stainless Steel Top , Capable Of Handling 2 L Solution 18 Laser Optic Lab Kit -Useful In Performing Innovative Optical Experiments And Carrying Out Optics Related Mini Projects.Useful In Conducting Michelson Interferometer, Diffraction, Opto-Electronics, Optical Fiber, Laser, Polarization Experiments. Capable Of Assembling On Optical Breadboard. Honey Comb Optical Breadboard With Rigid Supports And Various Opto - Mechanical And Optical Components. The Components Are Fixed To The Readboard By M6 Socket Head Cap Screws. To Be Designed To Perform More Than Experiments Using Diode Laser. Instruction Manual With Complete Information And Diagrams Is Provided Along With The Apparatus. Optical Breadboard Not Required. 19 Variable Neutral Density Filter ( Mounted ) - Material: Bk7 &Uv Fused Silica , Surface Quality :40-20 ( Scratch -Dig ) , Dimensional Tolerance +0.00, -0.2Mm, Thickness 3.0±0.2Mm, Clear Aperture-90%, Surface Flatness Λ / [email protected], Parallelism ≤ 1 Arc Min, Coating : Front Surface =Inconel, Back Surface =Anti-Reflection 20 Brewster Angle Measurment -With Goniometer, A Lser Light Source Capable Of Projecting A Light Beam That Is Linearly Polarized I Its Plane Of Incidence, And A Pin Hole Photodetector With Output Measurement Unit For Detecting And Measuring The Intensity Of Reflected Light.The Diode Laser And The Polarizer Rotator Are Mounted On An Optic Rail With High Quality Materials 21 Four Probe Method - 4 – Probe Resistivity Measurement ( Basic Model ) ., Temperature Variation Of Resistance Study., Built-In Constant Current Source And Milli-Voltmeter 22 Hall Effect Setup-Hall Effect Apparatus With State Of The Art Modules And Components.Hall Current : 0 - 10 Ma, Hall Voltage : 0 - 200 Mv, Temperature : Ambient - 50°C, Crystal : N - Type And P - Type Lightly Doped Germanium ( Ge ) , Field Density : 0 - 5 ± 5% Kg, Hall Effect Control Unit- Current:0 - 10 Ma, Voltage:0 - 200 Mv, Display:20 X 4 Alpha Numeric Lcd. Sample Control Holder With Rigid Base-Material:Anodized Aluminum Alloy, Gauss Probe Holder With Mount-Material:Anodized Aluminum Alloy, Digital Gauss Meter Range:0 - 20 K Gausstransducer:Inas, Hall Effect Catridge-Material:N And P Type Lightly Doped Germanium ( Ge ) , Electromagnet-Max Magnetic Field:5K Gauss ( At 20Mm Pole Space ) , Constant Current Power Supply-Output Current:0 Approved- 3.5 A 23 Digital Intensity Meter-Metravi 1300 Digital Lux Meter 24 Binocular Stereo Zoom Microscope With Integrated Camera, With Laptop With Latest Specification: Microscope Functions: 10X Eyepieces, 4.4:1 Zoom Stereo Microscope With Built- In 5 M Pixel Hd Digital Camera And 8X-35X Zoom Range, 10X / 20 Mm High Eye Point, Non-Removable Eyepieces, Exclusive 50-75 Mm Interpupillary Distance, 100 Mm Working Distance, Student- Proof, All-In- One, Plug And Play Design, No Removable Parts, Tool-Free Tension Control, Built-In 25, 000 Hour 6500 K Reflected, 4500 K Transmitted, True Daylight, Constant-Color Temperature Power Led Illumination For Both Reflected And Transmitted Light, Variable Light Intensity Control For Reflected And Transmitted Light. Reflected Light Transmitted Light Can And Be Used Separately Or Simultaneously 3 Directional Reflected Illumination ( Fill, Top And Oblique ) , Power Switch Located On Back Of Stand, Auto-Shutoff After 120 Minutes, Sealed Stage Plate, Sealed Light Control Panel On Rear Of Stage Area, Built In Sd Card Slot, Built-In Universal Voltage Stabilizing Power Supply Accommodates 100-240 V Input, Fully Safety Rated. Camera Functions: - Hd Mode For Live Image 1920X1080p Directly To An Hd Display Or For Image Capture To Sd Card ( No Pc Required ) - Pc Mode For Use With Pc And Imaging Software - Network Mode For Direct Connection Using Ethernet Cable - Camera Is Integrated Into The Microscope Stand - Light Distribution: 50% Visual / 50% Camera - Interfaces: Usb2, Hdmi, Ethernet - Maximum Image Size 5.0 Mpixel ( 2592 X 1944 ) - Complete Kit Contains Microscope, Usb2 Cable 1.8M, Hdmi Cable2.5M, Dedicated Imaging Software For Basic Image Capture And Simple Measuring And Annotation Applications, Quick Start Guide, Safety Booklet, Dust Cover, Country Specific Power Cord.Warranty02- 03 Years Preferred Brand: Leica, Nikon, Ziess 25 Autoclave ( Vertical ) 50 L Double Wall Construction With Inner S.S. 304, All These Sheets Are Argon Welded & Outer Chamber Made Of High Quality S.S. 304 / M.S. Sheet Duly Powder Coated.Electrically Heated By Means Of I.S.I. Quality Immersion Heaters With Working Pressure 15 Psi.Hydraulically Dye Pressed Lid From S.S. Plate With, Easy Pedal Lifting Device, Having Pressure Gauge, Two Nos. Safety Valve, Quick Release Coupling And Handle With Heater Cover Stand.Water Level Arrangement Cut Off Buzzer System And S.S. Perforated Basket Supplied Along With Unit On Free Of Cost. Inner S.S. & Outer M.S. ( With Energy Regulator ) . A ) Digital Temperature Controller Cum Indicator ( Instead Of Energy Regulator ) -6500 / - B ) Digital Timer – 3900 / - C ) Auto Pressure Cut Off System-4400 / - D ) Auto Vacuum Breaker-3400 / - E ) Auto Purging & Exhaust ( Solinoid Valve ) Water Level Glass Indicator-6500 / - Warranty02- 03 Years 26 Bacteriological Incubator Size Of Inner Chamber: 90 Liters Capacity. 3 Shelves Size: 18X18X18 Approximately Double Walled Construction With Complete Inner Chamber Made Of Highly Polished Stainless Steel Outer Chamber Should Be Of Steel Sheet Finished With Powder Coated Paint-Proper Insulation To Maintain Desired Temperature Inner Chamber Should Be Fabricated With Ribs For Adjusting Shelves To Convenient Height And Shelves Made Of Polished Stainless Steel Sheet As Per Chamber Doors To Be Insulated And Fitted With Heavy Hinges And Should Have Double Glass Window Temperature Thermostatically Controlled With Range From 5-60˚ C. With Accuracy Of ± 0.5 C. Air Ventilators To Be Provided On Both Side The Equipment Should Be Provide With Control Panel Having A Thermostat Control Knob, On-Off Switch, Pilot Lamp And Timer, Digital Indicator Should Be Supplied With Power Card And Plug Suitable To Operate On 220 V, Single Phase, 50 Hz, Ac Supply Should Be Us Fda / European Ce Certified. Warranty02- 03 Years 27 Refrigerator 245 L Frost Free 28 Analytical Electronic Balance Shimadzu* Capacity:220 G Min Display: 0. 1G Pan Size: 80 Mm Dia Approx Main Body Dimensions: 220Mm W X 330Mm D X 310Mm H Psc, Touch-Key With Built-In Or External Weight 29 Hot Air Oven Temp Range: 10 Capacity: 50 L Voltage: 220 V, 50Hz, Single Phasetemp Range 500C To 2500C Accuracy:+- 1 0C No. Of Shelves: 2 Dimension: 420X395x350mm Microprocessor Pid Controller With Timing Function. Polished Stainless Steel Chamber With Rounded Corners. Uniform Distribution Of Air Temperature. Double Layered Glass Door 30 Digital Colony Counters Specification:-Auto Mark Pen. Wolffhue Gel Grid Glass Plate. 110 Mm Magnifying Lens-Four Digit Resettable Electronic Counter.Nett Weight- 3.5 Kgs. Supply- 230V Ac 50Hz 31 Digital Camera For Microscopy: With Metal Alloy Casing, Camera Dimensions 60X60x40 Mm, Image Sensor: Cmos 10 Megapixel, Sensor Size 1 / 2. 3 “ , Pixel Size 1.67 X 1.67 Microns, Maximum Resolution 3584 X 2748 Pixels, Frame Rate 1.9 @ 3584 X 2748. Dynamic Range 65.2Db; Signal / Noise Ratio 34.0Db; Bining 2 X2, 4 X 4, Exposure Time 0.4Ms To 2000Ms; Spectral Range 380 – 650Nm With Ir Filter, Compatible Os Winxp, Vista / 7 / 8 / 10 ( 32, 64 Bit ) . Should Supplied With Software, Image Format Jpeg / Tiff / Bmp / Png. Electronic Interface Pc / Lap Usb – 2; Operating System – 10 Degree C To +50 Degree C; Should Work With Core – 2, I3, I5, I7 -> 2 Gb Ram; Should Be With C Mount / Eye Piece Mount And Image Processing Software 32 Digital Disperser-Motor Rating Input / Output - 800 / 500 W Volume Range-1 Ml– 2L Viscosity Max-5000 Mpas Speed Range - 3000 – 25, 000 Rpm Speed Display- Led Temperature- 5– 40 °C Voltage- 200 – 240 V 33 Overhead Stirrer With Accessories-Digital Speed Display Speed Range - 30 - 2000 Rpm Capacity 30-40 L Stand, Boss Head, Stirring Blade 34 Magnetic Stirrer With Hot Plate -Volume Range-Up To 20L Viscosity Max-5000 Mpas Speed Range - 50-1500 Rpm Speed Display- Led Heating Range- Rt To 350 0C Voltage- 200 – 240 V 35 Vacuum Oven With Pump -Digital Temp Controlled 14”X20”14 Temperature Up To 220 0C Vacuum Pump 36 Uv-Visible Spectrophotometer -Should Capable For Spectral Analysis Of Organic Compounds, Dna / Protein Quantitation, Enzyme Kinetics, Turbidity Measurement And Water Sample Analysis.Standalone And Pc Control.Should Have Lcd ( Auto Contrast Adjustment ) For Graphical Display And Method Parameters. Functional Key For Input Of Parameters And Standalone Operation.Resolution -1.00 Nm Or Better.Double Beam Optics.Blazed Holographic Grating Inczerny-Turner Mounting.Silicon Photodiode.Built In Light Source, Auto Position Adjustment, 20-W Halogen Lamp And Deuterium Lamp. Automatic Interchange Linked To Wavelength. Interchange Wavelength Can Be Set Freely In The Range Of 295 To 364Nm ( 0.1Nm Increment ) . .190-1100Nm.Variable Spectral Bandwidth With 0.5Nm Setting.0.05Nm Increments.0.05Nm Increments .±0.1Nm D2 656.1Nm With D2 Calibration Should Be Possible.Wavelength Display-0.05Nm Increments, Wavelength Setting-0.05Nm Increments , Wavelength Accuracy-±0.1Nm D2 656.1Nm With D2 Calibration Should Be Possible, Wavelength Repeatability-±0.1Nm Photometric Range-Absorbance: Up To 3.0 Abs Or Better, Transmittance：Up To 300% Or Better, Photometric Accuracy-±0.004Abs Or Better, ±0.3%T Or Better, Photometric Repeatability-0.002Abs Or Better, 0.1%T Or Better, Baseline Stability-≤0.0005Abs / 30Mins Or Better, Baseline Flatness-±0.001Abs Or Better Throughout The Uv-Visible Range, Noise Level-0.0008Abs Or Less, Stray Light-≤0.05% Or Less, Uv Spectroscopy Software-Photometric Mode, Spectrum Mode, Quantitation Mode Kinetics Mode And Time Scan Mode. Options For Multiple Wavelength Measurement And Multicomponent Quantitation, Sampling-Standard Quartz Cells 10Mm – 1 Pair 1.00Ml Or 0.7Ml Quartz Cells – 1 Pair Disposable Polymer Cells – 100 Nos. Local Supply-1 ) Pc Branded Intel Core I3 10Th Generation Processor, 16 Gb Ram, Ddr4; 18.5 Ledmonitor 2 ) Printer 3 ) Ups 1Kva On Line With 60 Minutes Back Upstandard Warranty – Minimum For Two Years. Amc Support For 5 Years After Warranty Shall Be Quoted. 37 Compound Microscope Led Illumination With Battery Backup And Intensity Control Condenser – Achromatic 0.65 / 0.90Na Stage –Two Plate Mechanical Stage Nose Piece – Quadruple Revolving Focus – Separate Fine And Coarse Focus Knobs Objectives: 4X / 0.10, 10X / 0.25, 40X / 0.65 ( Spring ) And 100X / 1.25 Oil ( Spring ) Eye Piece:Wf10x ( 18 Mm ) ; 360° Rotatable 45° Inclined Monocular Head Anti-Mould Optics For Fungal Protection And Dust Cover
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 11
Kerala View Result →
TenderDetail
Loading tenders