Traction Motor Tenders from India

supply of , 3-phase asynchronous traction motor [resistance ring mechanically interlocked to end plate design rotor, scheme-ii] for traction motor type 6fra-6068 for wap-7 loco without active speed sensor. specification no.4tms.096.081 alt-2 or latest

supply of , set of sealing rings for traction motor type 6fra6068 set consist of item of each 01 no. as per ref. no. 1&2 of clw drg. no. 4twd 096.030 alt-2. material to be procured from clw approved sources.

supply of , set of stator and rotor stamping for traction motor type 6fra-6068. one set consisting of following 05 items as per quantity mentioned against each. 1) stator main stampings to drg. no. 1twd.096.015 alt-6 ref-1 (or latest), specn. no. 4tms.096.053, rev-2, alt-8 (or latest) ,quantity per set 940 nos. plus/minus 8 percent. 2) solid stator end plate to drg. no. skel-4889 (or latest) , quantity per set 02 nos. 3) rotor main stampings to drg. no. 1twd.096.010, alt-9, ref-1(or latest) and...

supply of , set of labyrinth and bearing cap driving end (de) for wap7 traction motors type 6fra 6068 consisting of 4 items and set of labyrinth ring, bearing cap and clamp plate non driving end (nde) for wap7 traction motors type 6fra 6068 consist of 4 items and speed probe housing (machined) as per annexure enclosed.

design of framed concrete platform structure of m&p elevated equipments and traction motor gear test bench at muttom depot workshop bldg.-

procurement of locomotive electrical spares for ytps 1. arc box support power contact, 2. cranking contactor type:m5022ec5, 3. generator field contactor, 4. field shunt contactor type:m22ec6, 5. soft start contactor type:m50ec, 6. motor contactor, 7. generator field resistor, 8. soft start resistor soft start resistor, 9. wheel slip resistor wheel slip resistor wsrr1-2, 10. field shunt resistor field shunt resistor, 11. ground relay type:m22er2, 12. overload relay type:m22er2, 13. ...

supply of procurement of stand & trolleys for charkop depot of mumbai metro., ac filter drying trolley (ss 316l) as per annexure d., trolley for saloon air conditioners (ss 304) as per annexure a., saloon ac stacking stand as per annexure b., saloon ac function test (working) stand as per annexure c., hvac filter trolley as per annexure e, bogie frame stacking stand (type-1, 800mm height) as per annexure f, brake block storage bin as per annexure g., main compressor stacking stand with adopter ...

supply of , design, fabrication, supply, erection, testing & commissioning of ac traction motor no load test bench for free run of 3-ph ac traction motor used in 3-ph wag-9 electric loco with digital instruments control, protection, input supply 3-ph 415v 150a ac 50hz and abb drive acs-580-01-145a-4+j425 with data downloading software .make: sarola- model no.ac75k400se or equivalent. details as per attached annexure.

supply of , traction motor roller suspension bearing grease exxon arapen rb 320.

supply of , i) traction motor lifting tackle heavy duty high tenacity 100% polyster 4 ply webbed sililing loop at both end with1.1/2fts. movable anti-abbresive sleeve.one anti abbrasive sleeve at centre. capacity: 04 tons, length: 04 mtrs,swl:08 tons. qty =01 no. ii) endless heavy duty high tenacity 100% polyester 4 ply webbed siling. capacity: 02 tons, swl:04 tons. diameter of comp. siling 04 mtrs. qty =01 no.( two items in one set, one number each).n.b:tc/gc govt. approve test house accepted ...

supply of , traction motor blower including motor wound with corona resistance wire cat.no. p/0/0131 c & d no.t020/002 specn: spec. no. 1. clw/es/3/0019/g 2.spec/e- 10/3/09(motor) with amendment nos.01,02,03,04 & 05

supply of , temporary banding steel strip for hitachi traction motor as per drg no. tm.4he.3005 item no -1.

supply of , set of woolen felt strips for memu gear case of traction motor type bhel tm 4303 by, accordingly to isi 1719 of 2000 or latest , hard grade white with minimum density 0.46 gm/cm3 , minimum wool content 95% max. ash content -4% each set consists of two items with dimensions as 1) 8mm x 22.5mm x750mm 2) 6mm x 20.0mm x 550mm material to be purchased from clw approved vendors or their authorised distributor . each felt should be marked with mfg date , batch & make guarantee/warranty cer...

supply of , traction alternator complete type ta 7003 dv to bhel catalogue no: 481100001 & drg no:04301081004 suitable for 1400hp demu dpcs., traction motor type tm4303dy complete with pinion to 480100003 & drg, no:04391080001v01.

supply of , 64 teeth gear wheel for hitachi traction motor as per rdso drg.no.skdp-3459.

supply of , commutating pole coil with core complete to hitachi drawing no. 10s-808-416, rev-d = 2 nos ( s- pole), 10s-808-417 rev-d = 1 no ( s-pole), 10s-808-418 rev-d = 2 nos ( n-pole) and 10s-808-419 rev-d 1 no ( n-pole) for traction motor hs 15250a of wag7 locomotive.

supply of , traction motor complete ( full assembly ) with pinion ( without msu , gear case and gear wheel ) for bhel memu traction motor type 4303 by to bhel drawing no 04391080001 v00.

supply of , 3-phase asynchronous traction motor (resistance ring mechanically interlocked to end plate design rotor , scheme-ii) for traction motor 6fra-6068 for wag-9 and wap-7 locos without active speed sensor, specn.no. 4tms.096.081alt-2 or latest.

work of replacement of old wheel axle set with new wheel axle set overhauling of traction motors and other miscellaneous works of bo bo type 700hp bhel make diesel locomotive

supply of , modified earthing brush box assembly of traction motor hs15250a to rdso's drawing no. skel - 4584 alt-1. (item no.- 1 to 5 - one no each/sets, item no. - 6,7 & 10 - 3 nos each/sets and item no. - 8 & 9 - 6 nos each/sets) for wag-7 & wap4 locomotive.

supply of , traction motor to medha model no: tme -48-45-6 and to medha part no: sptsa007933r0001, suitable for 1600 hp igbt demu .

supply of , servoplex shc-120 (iocl) grease for traction motor bearing (wag9/wap7 )as per latest rdso tc no. rdso/2006/el/tc/0034 rev 4 dated 21.07.2008.

supply of , supply installation testing & commissioning of static traction motor analyzer with 02 year warrantee after commissioning. make megger/quadrant/baker/programma only. the technical specification for the static traction motor analyzer is attached as annexure-a.